WorldWideScience

Sample records for schweineserum gegenuber dem

  1. kawaihae_dem.grd

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...

  2. Coastal Digital Elevation Models (DEMs)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation models (DEMs) of U.S. and other coasts that typically integrate ocean bathymetry and land topography. The DEMs support NOAA's mission to understand...

  3. Coastal DEMs with Cross-Track Interferometry

    NARCIS (Netherlands)

    Greidanus, H.S.F.; Huising, E.J.; Platschorre, Y.; Bree, R.J.P. van; Halsema, D. van; Vaessen, E.M.J.

    1999-01-01

    Digital elevation models (DEMs) are produced from airborne radar cross-track interferometric measurements. Radar DEMs recorded from perpendicular orientations are intercompared, and compared to DEMs derived from airborne laser altimetry

  4. Radar and Lidar Radar DEM

    Science.gov (United States)

    Liskovich, Diana; Simard, Marc

    2011-01-01

    Using radar and lidar data, the aim is to improve 3D rendering of terrain, including digital elevation models (DEM) and estimates of vegetation height and biomass in a variety of forest types and terrains. The 3D mapping of vegetation structure and the analysis are useful to determine the role of forest in climate change (carbon cycle), in providing habitat and as a provider of socio-economic services. This in turn will lead to potential for development of more effective land-use management. The first part of the project was to characterize the Shuttle Radar Topography Mission DEM error with respect to ICESat/GLAS point estimates of elevation. We investigated potential trends with latitude, canopy height, signal to noise ratio (SNR), number of LiDAR waveform peaks, and maximum peak width. Scatter plots were produced for each variable and were fitted with 1st and 2nd degree polynomials. Higher order trends were visually inspected through filtering with a mean and median filter. We also assessed trends in the DEM error variance. Finally, a map showing how DEM error was geographically distributed globally was created.

  5. Digitial Elevation Model (DEM) 100K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USG to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  6. Digtial Elevation Model (DEM) 250K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  7. Digital Elevation Model (DEM) 24K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a...

  8. Automated Quality Control for Ortholmages and DEMs

    DEFF Research Database (Denmark)

    Höhle, Joachim; Potucková, Marketa

    2005-01-01

    The checking of geometric accurancy of orthoimages and digital elevation models (DEMs) is discussed. As a reference, an existing orthoimage and a second orthoimage derived from an overlapping aerial image, are used. The proposed automated procedures for checking the orthoimages and DEMs are based...

  9. ArcticDEM Validation and Accuracy Assessment

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2017-12-01

    ArcticDEM comprises a growing inventory Digital Elevation Models (DEMs) covering all land above 60°N. As of August, 2017, ArcticDEM had openly released 2-m resolution, individual DEM covering over 51 million km2, which includes areas of repeat coverage for change detection, as well as over 15 million km2 of 5-m resolution seamless mosaics. By the end of the project, over 80 million km2 of 2-m DEMs will be produced, averaging four repeats of the 20 million km2 Arctic landmass. ArcticDEM is produced from sub-meter resolution, stereoscopic imagery using open source software (SETSM) on the NCSA Blue Waters supercomputer. These DEMs have known biases of several meters due to errors in the sensor models generated from satellite positioning. These systematic errors are removed through three-dimensional registration to high-precision Lidar or other control datasets. ArcticDEM is registered to seasonally-subsetted ICESat elevations due its global coverage and high report accuracy ( 10 cm). The vertical accuracy of ArcticDEM is then obtained from the statistics of the fit to the ICESat point cloud, which averages -0.01 m ± 0.07 m. ICESat, however, has a relatively coarse measurement footprint ( 70 m) which may impact the precision of the registration. Further, the ICESat data predates the ArcticDEM imagery by a decade, so that temporal changes in the surface may also impact the registration. Finally, biases may exist between different the different sensors in the ArcticDEM constellation. Here we assess the accuracy of ArcticDEM and the ICESat registration through comparison to multiple high-resolution airborne lidar datasets that were acquired within one year of the imagery used in ArcticDEM. We find the ICESat dataset is performing as anticipated, introducing no systematic bias during the coregistration process, and reducing vertical errors to within the uncertainty of the airborne Lidars. Preliminary sensor comparisons show no significant difference post coregistration

  10. Estimating Coastal Digital Elevation Model (DEM) Uncertainty

    Science.gov (United States)

    Amante, C.; Mesick, S.

    2017-12-01

    Integrated bathymetric-topographic digital elevation models (DEMs) are representations of the Earth's solid surface and are fundamental to the modeling of coastal processes, including tsunami, storm surge, and sea-level rise inundation. Deviations in elevation values from the actual seabed or land surface constitute errors in DEMs, which originate from numerous sources, including: (i) the source elevation measurements (e.g., multibeam sonar, lidar), (ii) the interpolative gridding technique (e.g., spline, kriging) used to estimate elevations in areas unconstrained by source measurements, and (iii) the datum transformation used to convert bathymetric and topographic data to common vertical reference systems. The magnitude and spatial distribution of the errors from these sources are typically unknown, and the lack of knowledge regarding these errors represents the vertical uncertainty in the DEM. The National Oceanic and Atmospheric Administration (NOAA) National Centers for Environmental Information (NCEI) has developed DEMs for more than 200 coastal communities. This study presents a methodology developed at NOAA NCEI to derive accompanying uncertainty surfaces that estimate DEM errors at the individual cell-level. The development of high-resolution (1/9th arc-second), integrated bathymetric-topographic DEMs along the southwest coast of Florida serves as the case study for deriving uncertainty surfaces. The estimated uncertainty can then be propagated into the modeling of coastal processes that utilize DEMs. Incorporating the uncertainty produces more reliable modeling results, and in turn, better-informed coastal management decisions.

  11. Urban DEM generation, analysis and enhancements using TanDEM-X

    Science.gov (United States)

    Rossi, Cristian; Gernhardt, Stefan

    2013-11-01

    This paper analyzes the potential of the TanDEM-X mission for the generation of urban Digital Elevation Models (DEMs). The high resolution of the sensors and the absence of temporal decorrelation are exploited. The interferometric chain and the problems encountered for correct mapping of urban areas are analyzed first. The operational Integrated TanDEM-X Processor (ITP) algorithms are taken as reference. The ITP main product is called the raw DEM. Whereas the ITP coregistration stage is demonstrated to be robust enough, large improvements in the raw DEM such as fewer percentages of phase unwrapping errors, can be obtained by using adaptive fringe filters instead of the conventional ones in the interferogram generation stage. The shape of the raw DEM in the layover area is also shown and determined to be regular for buildings with vertical walls. Generally, in the presence of layover, the raw DEM exhibits a height ramp, resulting in a height underestimation for the affected structure. Examples provided confirm the theoretical background. The focus is centered on high resolution DEMs produced using spotlight acquisitions. In particular, a raw DEM over Berlin (Germany) with a 2.5 m raster is generated and validated. For this purpose, ITP is modified in its interferogram generation stage by adopting the Intensity Driven Adaptive Neighbourhood (IDAN) algorithm. The height Root Mean Square Error (RMSE) between the raw DEM and a reference is about 8 m for the two classes defining the urban DEM: structures and non-structures. The result can be further improved for the structure class using a DEM generated with Persistent Scatterer Interferometry. A DEM fusion is thus proposed and a drop of about 20% in the RMSE is reported.

  12. 2014 USACE NCMP Topobathy Lidar DEM: Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  13. 2016 USGS Lidar DEM: Maine QL2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Product: These are Digital Elevation Model (DEM) data for Franklin, Oxford, Piscataquis, and Somerset Counties, Maine as part of the required deliverables for the...

  14. Eine Analyse des Zusammenhangs zwischen dem Konsum von Alkopops und dem Problemverhalten von Jugendlichen

    OpenAIRE

    Metzner, Cornelia Beate Isabel

    2007-01-01

    Zielsetzung: In dieser Arbeit wird untersucht, ob bei Jugendlichen ein Zusammenhang zwischen dem Konsum von Alkopops einerseits und dem sonstigen Alkoholtrinkverhalten, dem Konsum von Zigaretten und illegalen Drogen sowie weiteren Risikoverhaltensweisen andererseits besteht, ferner ob sich Unterschiede im Verhalten von Jungen und Mädchen ergeben. Theoretischer und empirischer Hintergrund: �Alkopops�, d. h. Mischgetränke diverser Hersteller aus Likör bzw. Schnaps und Limonade sowie wein- ...

  15. Landbrugets trædemølle

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    Teorien om landbrugets trædemølle siger, at teknologi medfører stigende produktivitet, stigende udbud og dermed faldende priser. Dermed øges behovet for ny teknologi. Det vedvarende teknologipres gavner de innovative landmænd, mens de mere afventende landmænd kun oplever de negative virkninger i...... form af prisfald. I denne artikel beskrives nærmere de enkelte elementer i trædemøllen. Samtidig vurderes trædemøllens betydning og mulige påvirkning. Det konkluderes, at trædemøllen, dens forudsætninger og afledte virkninger stadig er fuldt gældende. Det er ikke muligt for et enkelt land eller region...... af bremse trædemøllen på lang sigt. På lokalt plan kan man løse nogle sociale og økonomiske problemer skabt af trædemøllen gennem nemmere afvandring....

  16. Large Scale Landform Mapping Using Lidar DEM

    Directory of Open Access Journals (Sweden)

    Türkay Gökgöz

    2015-08-01

    Full Text Available In this study, LIDAR DEM data was used to obtain a primary landform map in accordance with a well-known methodology. This primary landform map was generalized using the Focal Statistics tool (Majority, considering the minimum area condition in cartographic generalization in order to obtain landform maps at 1:1000 and 1:5000 scales. Both the primary and the generalized landform maps were verified visually with hillshaded DEM and an orthophoto. As a result, these maps provide satisfactory visuals of the landforms. In order to show the effect of generalization, the area of each landform in both the primary and the generalized maps was computed. Consequently, landform maps at large scales could be obtained with the proposed methodology, including generalization using LIDAR DEM.

  17. S1-Leitlinie Lipödem.

    Science.gov (United States)

    Reich-Schupke, Stefanie; Schmeller, Wilfried; Brauer, Wolfgang Justus; Cornely, Manuel E; Faerber, Gabriele; Ludwig, Malte; Lulay, Gerd; Miller, Anya; Rapprich, Stefan; Richter, Dirk Frank; Schacht, Vivien; Schrader, Klaus; Stücker, Markus; Ure, Christian

    2017-07-01

    Die vorliegende überarbeitete Leitlinie zum Lipödem wurde unter der Federführung der Deutschen Gesellschaft für Phlebologie (DGP) erstellt und finanziert. Die Inhalte beruhen auf einer systematischen Literaturrecherche und dem Konsens von acht medizinischen Fachgesellschaften und Berufsverbänden. Die Leitlinie beinhaltet Empfehlungen zu Diagnostik und Therapie des Lipödems. Die Diagnose ist dabei auf der Basis von Anamnese und klinischem Befund zu stellen. Charakteristisch ist eine umschriebene, symmetrisch lokalisierte Vermehrung des Unterhautfettgewebes an den Extremitäten mit deutlicher Disproportion zum Stamm. Zusätzlich finden sich Ödeme, Hämatomneigung und eine gesteigerte Schmerzhaftigkeit der betroffenen Körperabschnitte. Weitere apparative Untersuchungen sind bisher besonderen Fragestellungen vorbehalten. Die Erkrankung ist chronisch progredient mit individuell unterschiedlichem und nicht vorhersehbarem Verlauf. Die Therapie besteht aus vier Säulen, die individuell kombiniert und an das aktuelle Beschwerdebild angepasst werden sollten: komplexe physikalische Entstauungstherapie (manuelle Lymphdrainage, Kompressionstherapie, Bewegungstherapie, Hautpflege), Liposuktion und plastisch-chirurgische Interventionen, Ernährung und körperliche Aktivität sowie ggf. additive Psychotherapie. Operative Maßnahmen sind insbesondere dann angezeigt, wenn trotz konsequent durchgeführter konservativer Therapie noch Beschwerden bestehen bzw. eine Progredienz des Befundes und/oder der Beschwerden auftritt. Eine begleitend zum Lipödem bestehende morbide Adipositas sollte vor einer Liposuktion therapeutisch angegangen werden. © 2017 The Authors | Journal compilation © Blackwell Verlag GmbH, Berlin.

  18. ASTER Orthorectified Digital Elevation Model (DEM) V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The ASTER L3 DEM and Orthorectified Images form a multi-file product that contains both the Digital Elevation Model (DEM), and the Orthorectified Image products....

  19. The role of DEM at CERN

    CERN Document Server

    Van der Bij, E

    2005-01-01

    The DEM group in the Technical Support department provides services for the fabrication of special printed circuits that are invaluable for the whole particle physics community. The capability is based around a core technology that is developed by using skills to etch and process materials that are not commonly used in industry, combined with production methods used in PCB manufacturing. The role of the prototyping facilities is to assist engineers and physicists and to offer them easy access to competencies often not available from industry. At the same time, with the expertise and production capacity available, it makes that CERN is always geared up to handle emergency situations. The design office and the assembly workshop that are also part of DEM have similar roles that lower the cost and improve the quality and maintainability of electronics developed at CERN.

  20. Volcanic geomorphology using TanDEM-X

    Science.gov (United States)

    Poland, Michael; Kubanek, Julia

    2016-04-01

    Topography is perhaps the most fundamental dataset for any volcano, yet is surprisingly difficult to collect, especially during the course of an eruption. For example, photogrammetry and lidar are time-intensive and often expensive, and they cannot be employed when the surface is obscured by clouds. Ground-based surveys can operate in poor weather but have poor spatial resolution and may expose personnel to hazardous conditions. Repeat passes of synthetic aperture radar (SAR) data provide excellent spatial resolution, but topography in areas of surface change (from vegetation swaying in the wind to physical changes in the landscape) between radar passes cannot be imaged. The German Space Agency's TanDEM-X satellite system, however, solves this issue by simultaneously acquiring SAR data of the surface using a pair of orbiting satellites, thereby removing temporal change as a complicating factor in SAR-based topographic mapping. TanDEM-X measurements have demonstrated exceptional value in mapping the topography of volcanic environments in as-yet limited applications. The data provide excellent resolution (down to ~3-m pixel size) and are useful for updating topographic data at volcanoes where surface change has occurred since the most recent topographic dataset was collected. Such data can be used for applications ranging from correcting radar interferograms for topography, to modeling flow pathways in support of hazards mitigation. The most valuable contributions, however, relate to calculating volume changes related to eruptive activity. For example, limited datasets have provided critical measurements of lava dome growth and collapse at volcanoes including Merapi (Indonesia), Colima (Mexico), and Soufriere Hills (Montserrat), and of basaltic lava flow emplacement at Tolbachik (Kamchatka), Etna (Italy), and Kīlauea (Hawai`i). With topographic data spanning an eruption, it is possible to calculate eruption rates - information that might not otherwise be available

  1. DEM Calibration Approach: design of experiment

    Science.gov (United States)

    Boikov, A. V.; Savelev, R. V.; Payor, V. A.

    2018-05-01

    The problem of DEM models calibration is considered in the article. It is proposed to divide models input parameters into those that require iterative calibration and those that are recommended to measure directly. A new method for model calibration based on the design of the experiment for iteratively calibrated parameters is proposed. The experiment is conducted using a specially designed stand. The results are processed with technical vision algorithms. Approximating functions are obtained and the error of the implemented software and hardware complex is estimated. The prospects of the obtained results are discussed.

  2. Small catchments DEM creation using Unmanned Aerial Vehicles

    Science.gov (United States)

    Gafurov, A. M.

    2018-01-01

    Digital elevation models (DEM) are an important source of information on the terrain, allowing researchers to evaluate various exogenous processes. The higher the accuracy of DEM the better the level of the work possible. An important source of data for the construction of DEMs are point clouds obtained with terrestrial laser scanning (TLS) and unmanned aerial vehicles (UAV). In this paper, we present the results of constructing a DEM on small catchments using UAVs. Estimation of the UAV DEM showed comparable accuracy with the TLS if real time kinematic Global Positioning System (RTK-GPS) ground control points (GCPs) and check points (CPs) were used. In this case, the main source of errors in the construction of DEMs are the errors in the referencing of survey results.

  3. Impacts of DEM resolution and area threshold value uncertainty on ...

    African Journals Online (AJOL)

    ... that DEM resolution influences the selected flow accumulation threshold value; the suitable flow accumulation threshold value increases as the DEM resolution increases, and shows greater variability for basins with lower drainage densities. The link between drainage area threshold value and stream network extraction ...

  4. ASPECTS OF DEM GENERATION FROM UAS IMAGERY

    Directory of Open Access Journals (Sweden)

    A. Greiwe

    2013-08-01

    Full Text Available Since a few years, micro UAS (unmanned aerial systems with vertical take off and landing capabilities like quadro- or octocopter are used as sensor platform for Aerophotogrammetry. Since the restricted payload of micro UAS with a total weight up of 5 kg (payload only up to 1.5 kg, these systems are often equipped with small format cameras. These cameras can be classified as amateur cameras and it is often the case, that these systems do not meet the requirements of a geometric stable camera for photogrammetric measurement purposes. However, once equipped with a suitable camera system, an UAS is an interesting alternative to expensive manned flights for small areas. The operating flight height of the above described UAS is about 50 up to 150 meters above ground level. This low flight height lead on the one hand to a very high spatial resolution of the aerial imagery. Depending on the cameras focal length and the sensor's pixel size, the ground sampling distance (GSD is usually about 1 up to 5 cm. This high resolution is useful especially for the automatic generation of homologous tie-points, which are a precondition for the image alignment (bundle block adjustment. On the other hand, the image scale depends on the object's height and the UAV operating height. Objects like mine heaps or construction sites show high variations of the object's height. As a result, operating the UAS with a constant flying height will lead to high variations in the image scale. For some processing approaches this will lead to problems e.g. the automatic tie-point generation in stereo image pairs. As precondition to all DEM generating approaches, first of all a geometric stable camera, sharp images are essentially. Well known calibration parameters are necessary for the bundle adjustment, to control the exterior orientations. It can be shown, that a simultaneous on site camera calibration may lead to misaligned aerial images. Also, the success rate of an automatic tie

  5. Hydraulic fracturing - an attempt of DEM simulation

    Science.gov (United States)

    Kosmala, Alicja; Foltyn, Natalia; Klejment, Piotr; Dębski, Wojciech

    2017-04-01

    Hydraulic fracturing is a technique widely used in oil, gas and unconventional reservoirs exploitation in order to enable the oil/gas to flow more easily and enhance the production. It relays on pumping into a rock a special fluid under a high pressure which creates a set of microcracks which enhance porosity of the reservoir rock. In this research, attempt of simulation of such hydrofracturing process using the Discrete Element Method approach is presented. The basic assumption of this approach is that the rock can be represented as an assembly of discrete particles cemented into a rigid sample (Potyondy 2004). An existence of voids among particles simulates then a pore system which can be filled out by fracturing fluid, numerically represented by much smaller particles. Following this microscopic point of view and its numerical representation by DEM method we present primary results of numerical analysis of hydrofracturing phenomena, using the ESyS-Particle Software. In particular, we consider what is happening in distinct vicinity of the border between rock sample and fracking particles, how cracks are creating and evolving by breaking bonds between particles, how acoustic/seismic energy is releasing and so on. D.O. Potyondy, P.A. Cundall. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 41 (2004), pp. 1329-1364.

  6. Digital Elevation Models (DEMs) for the main 8 Hawaiian Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Digital elevation model (DEM) data are arrays of regularly spaced elevation values referenced horizontally either to a Universal Transverse Mercator (UTM) projection...

  7. VT USGS NED Hydro-flattened DEM (30 meter) - statewide

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) VTHYDRODEM was created to produce a "hydrologically correct" DEM, compliant with the Vermont Hydrography Dataset (VHD) in support of the "flow...

  8. An Overview of the CapDEM Integrated Engineering Environment

    National Research Council Canada - National Science Library

    Lam, Sylvia; Poursina, Shiva; Spafford, Tim

    2005-01-01

    In order to gain a better understanding of the approach and the technology requirements to support collaborative engineering activities, the Collaborative Capability Definition, Engineering and Management (CapDEM...

  9. 2015 USACE NCMP Topobathy Lidar DEM: Avalon (NJ)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  10. IceBridge DMS L3 Photogrammetric DEM

    Data.gov (United States)

    National Aeronautics and Space Administration — The IceBridge DMS L3 Photogrammetric DEM (IODMS3) data set contains gridded digital elevation models and orthorectified images of Greenland derived from the Digital...

  11. 2013 USACE NCMP Topobathy Lidar DEM: Niihau (HI)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  12. 2015 USACE NCMP Topobathy Lidar DEM: Sand Island (WA)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 m grid size, generated from data collected by the Coastal Zone Mapping...

  13. 2016 USACE NCMP Topobathy Lidar DEM: Gulf Coast (TX)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations at a 1 meter grid size, generated from data collected by the...

  14. 2016 NOAA Topobathy Lidar DEM: Upper Lake Michigan Islands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This digital elevation model (DEM) was created from data collected by Leading Edge Geomatics using a Leica Chiroptera II Bathymetric & Topographic Sensor. The...

  15. 2015 USACE NCMP Topobathy Lidar DEM: Egmont Key (FL)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These 1 m gridded bare earth Digital Elevation Model (DEM) files contain rasterized topobathy lidar elevations generated from data collected by the Coastal Zone...

  16. Greenland 5 km DEM, Ice Thickness, and Bedrock Elevation Grids

    Data.gov (United States)

    National Aeronautics and Space Administration — A Digital Elevation Model (DEM), ice thickness grid, and bedrock elevation grid of Greenland acquired as part of the PARCA program are available in ASCII text format...

  17. Boreal forest biomass classification with TanDEM-X

    OpenAIRE

    Torano Caicoya, Astor; Kugler, Florian; Papathanassiou, Kostas; Hajnsek, Irena

    2013-01-01

    High spatial resolution X-band interferometric SAR data from the TanDEM-X, in the operational DEM generation mode, are sensitive to forest structure and can therefore be used for thematic boreal forest classification of forest environments. The interferometric coherence in absence of temporal decorrelation depends strongly on forest height and structure. Due to the rather homogenous structure of boreal forest, forest biomass can be derived from forest height, on the basis of allometric equati...

  18. Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension

    Directory of Open Access Journals (Sweden)

    Claus Altmayer

    2015-03-01

    Full Text Available Neues aus dem Forschungsfeld Deutsch als Zweitsprache. Sammelrezension (Teil 2 von Bernt Ahrenholz (Hrsg. (2009, Empirische Befunde zu DaZ-Erwerb und Sprachförderung. Beiträge aus dem 3. ‚Workshop Kinder mit Migrationshintergrund‘; Karen Schramm & Christoph Schröder (Hrsg. (2009, Empirische Zugänge zu Spracherwerb und Sprachförderung in Deutsch als Zweitsprache; Stefan Jeuk (2010, Deutsch als Zweitsprache in der Schule. Grundlagen - Diagnose – Förderung

  19. Enhanced ASTER DEMs for Decadal Measurements of Glacier Elevation Changes

    Science.gov (United States)

    Girod, L.; Nuth, C.; Kääb, A.

    2016-12-01

    Elevation change data is critical to the understanding of a number of geophysical processes, including glaciers through the measurement their volume change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system on-board the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available today, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. We developed MMASTER, an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. Our sensor modeling does not require ground control points and thus potentially allows for automatic processing of large data volumes. When compared to ground truth data, we have assessed a ±5m accuracy in DEM differencing when using our processing method, improved from the ±30m when using the AST14DMO DEM product. We demonstrate and discuss this improved ASTER DEM quality for a number of glaciers in Greenland (See figure attached), Alaska, and Svalbard. The quality of our measurements promises to further unlock the underused potential of ASTER DEMs for glacier volume change time series on a global scale. The data produced by our method will thus help to better understand the response of glaciers to climate change and their influence on runoff and sea level.

  20. Algumas anedotas sobre Demóstenes: uma releitura

    Directory of Open Access Journals (Sweden)

    Maddalena Vallozza

    2013-06-01

    Full Text Available Muitas das anedotas sobre Demóstenes estão relacionados a seus problemas de voz e a suas dificuldades no momento da hypokrisis. Eu proponho uma reinterpretação das páginas em que eles nos são transmitidos: de Quintiliano (11, 3, a principal testemunha, a Cícero (Orator 26 e 56-58, Brutus 142, De Oratore I 261 e III 213, do autor da seção sobre Demóstenes nas Vidas dos Dez Oradores (844 d-845 b à Vida de Demóstene, de Plutarco. Com base nisso, particularmente graças a Plutarco, que cita Hermipo e Demétrio de Fáleros, é possível formular a hipótese de que a tradição nasceu no Perípato, na área de interesses pela hypokrisis que demonstram o perdido Perì hypokríseos de Teofrasto e os fragmentos da Retórica de Demétrio de Fáleros.

  1. Novel application of DEM to modelling comminution processes

    International Nuclear Information System (INIS)

    Delaney, Gary W; Cleary, Paul W; Sinnott, Matt D; Morrison, Rob D

    2010-01-01

    Comminution processes in which grains are broken down into smaller and smaller sizes represent a critical component in many industries including mineral processing, cement production, food processing and pharmaceuticals. We present a novel DEM implementation capable of realistically modelling such comminution processes. This extends on a previous implementation of DEM particle breakage that utilized spherical particles. Our new extension uses super-quadric particles, where daughter fragments with realistic size and shape distributions are packed inside a bounding parent super-quadric. We demonstrate the flexibility of our approach in different particle breakage scenarios and examine the effect of the chosen minimum resolved particle size. This incorporation of the effect of particle shape in the breakage process allows for more realistic DEM simulations to be performed, that can provide additional fundamental insights into comminution processes and into the behaviour of individual pieces of industrial machinery.

  2. EVALUATING THE ACCURACY OF DEM GENERATION ALGORITHMS FROM UAV IMAGERY

    Directory of Open Access Journals (Sweden)

    J. J. Ruiz

    2013-08-01

    Full Text Available In this work we evaluated how the use of different positioning systems affects the accuracy of Digital Elevation Models (DEMs generated from aerial imagery obtained with Unmanned Aerial Vehicles (UAVs. In this domain, state-of-the-art DEM generation algorithms suffer from typical errors obtained by GPS/INS devices in the position measurements associated with each picture obtained. The deviations from these measurements to real world positions are about meters. The experiments have been carried out using a small quadrotor in the indoor testbed at the Center for Advanced Aerospace Technologies (CATEC. This testbed houses a system that is able to track small markers mounted on the UAV and along the scenario with millimeter precision. This provides very precise position measurements, to which we can add random noise to simulate errors in different GPS receivers. The results showed that final DEM accuracy clearly depends on the positioning information.

  3. Influence of Terraced area DEM Resolution on RUSLE LS Factor

    Science.gov (United States)

    Zhang, Hongming; Baartman, Jantiene E. M.; Yang, Xiaomei; Gai, Lingtong; Geissen, Viollette

    2017-04-01

    Topography has a large impact on the erosion of soil by water. Slope steepness and slope length are combined (the LS factor) in the universal soil-loss equation (USLE) and its revised version (RUSLE) for predicting soil erosion. The LS factor is usually extracted from a digital elevation model (DEM). The grid size of the DEM will thus influence the LS factor and the subsequent calculation of soil loss. Terracing is considered as a support practice factor (P) in the USLE/RUSLE equations, which is multiplied with the other USLE/RUSLE factors. However, as terraces change the slope length and steepness, they also affect the LS factor. The effect of DEM grid size on the LS factor has not been investigated for a terraced area. We obtained a high-resolution DEM by unmanned aerial vehicles (UAVs) photogrammetry, from which the slope steepness, slope length, and LS factor were extracted. The changes in these parameters at various DEM resolutions were then analysed. The DEM produced detailed LS-factor maps, particularly for low LS factors. High (small valleys, gullies, and terrace ridges) and low (flats and terrace fields) spatial frequencies were both sensitive to changes in resolution, so the areas of higher and lower slope steepness both decreased with increasing grid size. Average slope steepness decreased and average slope length increased with grid size. Slope length, however, had a larger effect than slope steepness on the LS factor as the grid size varied. The LS factor increased when the grid size increased from 0.5 to 30-m and increased significantly at grid sizes >5-m. The LS factor was increasingly overestimated as grid size decreased. The LS factor decreased from grid sizes of 30 to 100-m, because the details of the terraced terrain were gradually lost, but the factor was still overestimated.

  4. Discrete Element Modeling (DEM) of Triboelectrically Charged Particles: Revised Experiments

    Science.gov (United States)

    Hogue, Michael D.; Calle, Carlos I.; Curry, D. R.; Weitzman, P. S.

    2008-01-01

    In a previous work, the addition of basic screened Coulombic electrostatic forces to an existing commercial discrete element modeling (DEM) software was reported. Triboelectric experiments were performed to charge glass spheres rolling on inclined planes of various materials. Charge generation constants and the Q/m ratios for the test materials were calculated from the experimental data and compared to the simulation output of the DEM software. In this paper, we will discuss new values of the charge generation constants calculated from improved experimental procedures and data. Also, planned work to include dielectrophoretic, Van der Waals forces, and advanced mechanical forces into the software will be discussed.

  5. Precise baseline determination for the TanDEM-X mission

    Science.gov (United States)

    Koenig, Rolf; Moon, Yongjin; Neumayer, Hans; Wermuth, Martin; Montenbruck, Oliver; Jäggi, Adrian

    The TanDEM-X mission will strive for generating a global precise Digital Elevation Model (DEM) by way of bi-static SAR in a close formation of the TerraSAR-X satellite, already launched on June 15, 2007, and the TanDEM-X satellite to be launched in May 2010. Both satellites carry the Tracking, Occultation and Ranging (TOR) payload supplied by the GFZ German Research Centre for Geosciences. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), and a Laser retro-reflector (LRR) for precise orbit determination (POD) and atmospheric sounding. The IGOR is of vital importance for the TanDEM-X mission objectives as the millimeter level determination of the baseline or distance between the two spacecrafts is needed to derive meter level accurate DEMs. Within the TanDEM-X ground segment GFZ is responsible for the operational provision of precise baselines. For this GFZ uses two software chains, first its Earth Parameter and Orbit System (EPOS) software and second the BERNESE software, for backup purposes and quality control. In a concerted effort also the German Aerospace Center (DLR) generates precise baselines independently with a dedicated Kalman filter approach realized in its FRNS software. By the example of GRACE the generation of baselines with millimeter accuracy from on-board GPS data can be validated directly by way of comparing them to the intersatellite K-band range measurements. The K-band ranges are accurate down to the micrometer-level and therefore may be considered as truth. Both TanDEM-X baseline providers are able to generate GRACE baselines with sub-millimeter accuracy. By merging the independent baselines by GFZ and DLR, the accuracy can even be increased. The K-band validation however covers solely the along-track component as the K-band data measure just the distance between the two GRACE satellites. In addition they inhibit an un-known bias which must be modelled in the comparison, so the

  6. Resource Management in Diffserv On DemAnd (RODA) PHR

    NARCIS (Netherlands)

    Westberg, L.; Jacobsson, M.; de Kogel, M.; Oosthoek, S.; Partain, D.; Rexhepi, V.; Wallentin, P.; Karagiannis, Georgios

    The purpose of this draft is to present the Resource Management in Diffserv (RMD) On DemAnd (RODA) Per Hop Reservation (PHR) protocol. The RODA PHR protocol is used on a per-hop basis in a Differentiated Services (Diffserv) domain and extends the Diffserv Per Hop Behavior (PHB) with resource

  7. Spatial Characterization of Landscapes through Multifractal Analysis of DEM

    Directory of Open Access Journals (Sweden)

    P. L. Aguado

    2014-01-01

    Full Text Available Landscape evolution is driven by abiotic, biotic, and anthropic factors. The interactions among these factors and their influence at different scales create a complex dynamic. Landscapes have been shown to exhibit numerous scaling laws, from Horton’s laws to more sophisticated scaling of heights in topography and river network topology. This scaling and multiscaling analysis has the potential to characterise the landscape in terms of the statistical signature of the measure selected. The study zone is a matrix obtained from a digital elevation model (DEM (map 10 × 10 m, and height 1 m that corresponds to homogeneous region with respect to soil characteristics and climatology known as “Monte El Pardo” although the water level of a reservoir and the topography play a main role on its organization and evolution. We have investigated whether the multifractal analysis of a DEM shows common features that can be used to reveal the underlying patterns and information associated with the landscape of the DEM mapping and studied the influence of the water level of the reservoir on the applied analysis. The results show that the use of the multifractal approach with mean absolute gradient data is a useful tool for analysing the topography represented by the DEM.

  8. Eine neue Tornaria aus dem Ostindischen Archipel (Tornaria Sunieri)

    NARCIS (Netherlands)

    Stiasny, G.

    1921-01-01

    Da aus dem malayischen Archipel durch die Siboga-Monographie Spengels (2) zwar eine Anzahl Enteropneusten, jedoch nur eine einzige Tornaria bekannt worden ist, war anzunehmen, dass noch andere Tornarien in diesem Gebiete nachzuweisen sein würden. Von dieser Erwartung ausgehend wandte ich mich an

  9. Artificial terraced field extraction based on high resolution DEMs

    Science.gov (United States)

    Na, Jiaming; Yang, Xin; Xiong, Liyang; Tang, Guoan

    2017-04-01

    With the increase of human activities, artificial landforms become one of the main terrain features with special geographical and hydrological value. Terraced field, as the most important artificial landscapes of the loess plateau, plays an important role in conserving soil and water. With the development of digital terrain analysis (DTA), there is a current and future need in developing a robust, repeatable and cost-effective research methodology for terraced fields. In this paper, a novel method using bidirectional DEM shaded relief is proposed for terraced field identification based on high resolution DEM, taking Zhifanggou watershed, Shannxi province as the study area. Firstly, 1m DEM is obtained by low altitude aerial photogrammetry using Unmanned Aerial Vehicle (UAV), and 0.1m DOM is also obtained as the test data. Then, the positive and negative terrain segmentation is done to acquire the area of terraced field. Finally, a bidirectional DEM shaded relief is simulated to extract the ridges of each terraced field stages. The method in this paper can get not only polygon feature of the terraced field areas but also line feature of terraced field ridges. The accuracy is 89.7% compared with the artificial interpretation result from DOM. And additional experiment shows that this method has a strong robustness as well as high accuracy.

  10. Evaluating DEM results with FEM perspectives of load : soil interaction

    NARCIS (Netherlands)

    Tadesse, D.

    2004-01-01

    Keywords: Load - soil interaction, soil structure, soil mechanical properties, FEM (Finite Element Method), Plaxis (Finite Element Code), granular particles, shear stress, DEM (Distinct Element Method),

  11. Estimating River Surface Elevation From ArcticDEM

    Science.gov (United States)

    Dai, Chunli; Durand, Michael; Howat, Ian M.; Altenau, Elizabeth H.; Pavelsky, Tamlin M.

    2018-04-01

    ArcticDEM is a collection of 2-m resolution, repeat digital surface models created from stereoscopic satellite imagery. To demonstrate the potential of ArcticDEM for measuring river stages and discharges, we estimate river surface heights along a reach of Tanana River near Fairbanks, Alaska, by the precise detection of river shorelines and mapping of shorelines to land surface elevation. The river height profiles over a 15-km reach agree with in situ measurements to a standard deviation less than 30 cm. The time series of ArcticDEM-derived river heights agree with the U.S. Geological Survey gage measurements with a standard deviation of 32 cm. Using the rating curve for that gage, we obtain discharges with a validation accuracy (root-mean-square error) of 234 m3/s (23% of the mean discharge). Our results demonstrate that ArcticDEM can accurately measure spatial and temporal variations of river surfaces, providing a new and powerful data set for hydrologic analysis.

  12. DEM-based research on the landform features of China

    Science.gov (United States)

    Tang, Guoan; Liu, Aili; Li, Fayuan; Zhou, Jieyu

    2006-10-01

    Landforms can be described and identified by parameterization of digital elevation model (DEM). This paper discusses the large-scale geomorphological characteristics of China based on numerical analysis of terrain parameters and develop a methodology for characterizing landforms from DEMs. The methodology is implemented as a two-step process. First, terrain variables are derived from a 1-km DEM in a given statistical unit including local relief, the earth's surface incision, elevation variance coefficient, roughness, mean slope and mean elevation. Second, every parameter regarded as a single-band image is combined into a multi-band image. Then ISODATA unsupervised classification and the Bayesian technique of Maximum Likelihood supervised classification are applied for landform classification. The resulting landforms are evaluated by the means of Stratified Sampling with respect to an existing map and the overall classification accuracy reaches to rather high value. It's shown that the derived parameters carry sufficient physiographic information and can be used for landform classification. Since the classification method integrates manifold terrain indexes, conquers the limitation of the subjective cognition, as well as a low cost, apparently it could represent an applied foreground in the classification of macroscopic relief forms. Furthermore, it exhibits significance in consummating the theory and the methodology of DEMs on digital terrain analysis.

  13. Grain sedimentation with SPH-DEM and its validation

    NARCIS (Netherlands)

    Robinson, M.J.; Luding, Stefan; Ramaioli, Marco; Yu, A; Dong, K; Yang, R; Luding, S

    2013-01-01

    Our mesoscale simulation method [M. Robinson, S. Luding, and M. Ramaioli, submitted (2013)] for multiphase fluid-particle flows couples Smoothed Particle Hydrodynamics (SPH) and the Discrete Element Method (DEM) and enjoys the flexibility of meshless methods, such as being capable to handling free

  14. a High Precision dem Extraction Method Based on Insar Data

    Science.gov (United States)

    Wang, Xinshuang; Liu, Lingling; Shi, Xiaoliang; Huang, Xitao; Geng, Wei

    2018-04-01

    In the 13th Five-Year Plan for Geoinformatics Business, it is proposed that the new InSAR technology should be applied to surveying and mapping production, which will become the innovation driving force of geoinformatics industry. This paper will study closely around the new outline of surveying and mapping and then achieve the TerraSAR/TanDEM data of Bin County in Shaanxi Province in X band. The studying steps are as follows; Firstly, the baseline is estimated from the orbital data; Secondly, the interferometric pairs of SAR image are accurately registered; Thirdly, the interferogram is generated; Fourth, the interferometric correlation information is estimated and the flat-earth phase is removed. In order to solve the phase noise and the discontinuity phase existing in the interferometric image of phase, a GAMMA adaptive filtering method is adopted. Aiming at the "hole" problem of missing data in low coherent area, the interpolation method of low coherent area mask is used to assist the phase unwrapping. Then, the accuracy of the interferometric baseline is estimated from the ground control points. Finally, 1 : 50000 DEM is generated, and the existing DEM data is used to verify the accuracy through statistical analysis. The research results show that the improved InSAR data processing method in this paper can obtain the high-precision DEM of the study area, exactly the same with the topography of reference DEM. The R2 can reach to 0.9648, showing a strong positive correlation.

  15. ArcticDEM Year 3; Improving Coverage, Repetition and Resolution

    Science.gov (United States)

    Morin, P. J.; Porter, C. C.; Cloutier, M.; Howat, I.; Noh, M. J.; Willis, M. J.; Candela, S. G.; Bauer, G.; Kramer, W.; Bates, B.; Williamson, C.

    2017-12-01

    Surface topography is among the most fundamental data sets for geosciences, essential for disciplines ranging from glaciology to geodynamics. The ArcticDEM project is using sub-meter, commercial imagery licensed by the National Geospatial-Intelligence Agency, petascale computing, and open source photogrammetry software to produce a time-tagged 2m posting elevation model and a 5m posting mosaic of the entire Arctic region. As ArcticDEM enters its third year, the region has gone from having some of the sparsest and poorest elevation data to some of the most precise and complete data of any region on the globe. To date, we have produced and released over 80,000,000 km2 as 57,000 - 2m posting, time-stamped DEMs. The Arctic, on average, is covered four times though there are hotspots with more than 100 DEMs. In addition, the version 1 release includes a 5m posting mosaic covering the entire 20,000,000 km2 region. All products are publically available through arctidem.org, ESRI web services, and a web viewer. The final year of the project will consist of a complete refiltering of clouds/water and re-mosaicing of all elevation data. Since inception of the project, post-processing techniques have improved significantly, resulting in fewer voids, better registration, sharper coastlines, and fewer inaccuracies due to clouds. All ArcticDEM data will be released in 2018. Data, documentation, web services and web viewer are available at arcticdem.org

  16. Hydraulic correction method (HCM) to enhance the efficiency of SRTM DEM in flood modeling

    Science.gov (United States)

    Chen, Huili; Liang, Qiuhua; Liu, Yong; Xie, Shuguang

    2018-04-01

    Digital Elevation Model (DEM) is one of the most important controlling factors determining the simulation accuracy of hydraulic models. However, the currently available global topographic data is confronted with limitations for application in 2-D hydraulic modeling, mainly due to the existence of vegetation bias, random errors and insufficient spatial resolution. A hydraulic correction method (HCM) for the SRTM DEM is proposed in this study to improve modeling accuracy. Firstly, we employ the global vegetation corrected DEM (i.e. Bare-Earth DEM), developed from the SRTM DEM to include both vegetation height and SRTM vegetation signal. Then, a newly released DEM, removing both vegetation bias and random errors (i.e. Multi-Error Removed DEM), is employed to overcome the limitation of height errors. Last, an approach to correct the Multi-Error Removed DEM is presented to account for the insufficiency of spatial resolution, ensuring flow connectivity of the river networks. The approach involves: (a) extracting river networks from the Multi-Error Removed DEM using an automated algorithm in ArcGIS; (b) correcting the location and layout of extracted streams with the aid of Google Earth platform and Remote Sensing imagery; and (c) removing the positive biases of the raised segment in the river networks based on bed slope to generate the hydraulically corrected DEM. The proposed HCM utilizes easily available data and tools to improve the flow connectivity of river networks without manual adjustment. To demonstrate the advantages of HCM, an extreme flood event in Huifa River Basin (China) is simulated on the original DEM, Bare-Earth DEM, Multi-Error removed DEM, and hydraulically corrected DEM using an integrated hydrologic-hydraulic model. A comparative analysis is subsequently performed to assess the simulation accuracy and performance of four different DEMs and favorable results have been obtained on the corrected DEM.

  17. Der Ritter mit dem Hemd : drei Fassungen einer mittelalterlichen Erzählung

    OpenAIRE

    Dunphy, Graeme

    2011-01-01

    Unter den zahlreichen Motiven, die in der mittelalterlichen Literatur mit Frauendienst verbunden sind, gehört das vom Ritter mit dem Hemd zu den besonders interessanten. Es erscheint zunächst in dem ersten von fünf Fabliaux aus einer verlorenen Turiner Handschrift, die dem sonst unbekannten altfranzösischen Dichter Jacques de Baisieux zugeschrieben werden, einer heiteren Kurzgeschichte mit dem Titel "Des trois chevaliers et del chainse". In der vorliegenden Untersuchung gilt es, der Frage der...

  18. Digital Elevation Model (DEM), The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some parts of the county, particularly the Green Bay Metro area, Published in 2000, 1:4800 (1in=400ft) scale, Brown County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2000. The county-wide DEM is published with a 20-foot grid size, though we have a more detailed DEM/DTM for some...

  19. Accuracy of Cartosat-1 DEM and its derived attribute at multiple ...

    Indian Academy of Sciences (India)

    and information content was compared using mean elevation, variance and entropy statistics. Various ... required, but for local studies large scale represen- tation is ... been made to examine the effect of DEM accuracy ... accuracy of DEM is evaluated with respect to grid .... that loss of entropy is a measure of DEM quality or.

  20. A comparative appraisal of hydrological behavior of SRTM DEM at catchment level

    Science.gov (United States)

    Sharma, Arabinda; Tiwari, K. N.

    2014-11-01

    The Shuttle Radar Topography Mission (SRTM) data has emerged as a global elevation data in the past one decade because of its free availability, homogeneity and consistent accuracy compared to other global elevation dataset. The present study explores the consistency in hydrological behavior of the SRTM digital elevation model (DEM) with reference to easily available regional 20 m contour interpolated DEM (TOPO DEM). Analysis ranging from simple vertical accuracy assessment to hydrological simulation of the studied Maithon catchment, using empirical USLE model and semidistributed, physical SWAT model, were carried out. Moreover, terrain analysis involving hydrological indices was performed for comparative assessment of the SRTM DEM with respect to TOPO DEM. Results reveal that the vertical accuracy of SRTM DEM (±27.58 m) in the region is less than the specified standard (±16 m). Statistical analysis of hydrological indices such as topographic wetness index (TWI), stream power index (SPI), slope length factor (SLF) and geometry number (GN) shows a significant differences in hydrological properties of the two studied DEMs. Estimation of soil erosion potentials of the catchment and conservation priorities of microwatersheds of the catchment using SRTM DEM and TOPO DEM produce considerably different results. Prediction of soil erosion potential using SRTM DEM is far higher than that obtained using TOPO DEM. Similarly, conservation priorities determined using the two DEMs are found to be agreed for only 34% of microwatersheds of the catchment. ArcSWAT simulation reveals that runoff predictions are less sensitive to selection of the two DEMs as compared to sediment yield prediction. The results obtained in the present study are vital to hydrological analysis as it helps understanding the hydrological behavior of the DEM without being influenced by the model structural as well as parameter uncertainty. It also reemphasized that SRTM DEM can be a valuable dataset for

  1. DEM analysis of FOXSI-2 microflare using AIA observations

    Science.gov (United States)

    Athiray Panchapakesan, Subramania; Glesener, Lindsay; Vievering, Juliana; Camilo Buitrago-Casas, Juan; Christe, Steven; Inglis, Andrew; Krucker, Sam; Musset, Sophie

    2017-08-01

    The second flight of Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket experiment was successfully completed on 11 December 2014. FOXSI makes direct imaging and spectral observation of the Sun in hard X-rays using grazing incidence optics modules which focus X-rays onto seven focal plane detectors kept at a 2m distance, in the energy range 4 to 20 keV, to study particle acceleration and coronal heating. Significant HXR emissions were observed by FOXSI during microflare events with A0.5 and A2.5 class, as classified by GOES, that occurred during FOXSI-2 flight.Spectral analysis of FOXSI data for these events indicate presence of plasma at higher temperatures (>10MK). We attempt to study the plasma content in the corona at different temperatures, characterized by the differential emission measure (DEM), over the FOXSI-2 observed flare regions using the Atmospheric Imaging Assembly (SDO/AIA) data. We utilize AIA observations in different EUV filters that are sensitive to ionized iron lines, to determine the DEM by using a regularized inversion method. This poster will show the properties of hot plasma as derived from FOXSI-2 HXR spectra with supporting DEM analysis using AIA observations.

  2. THE GLOBAL TANDEM-X DEM: PRODUCTION STATUS AND FIRST VALIDATION RESULTS

    Directory of Open Access Journals (Sweden)

    M. Huber

    2012-07-01

    Full Text Available The TanDEM-X mission will derive a global digital elevation model (DEM with satellite SAR interferometry. Two radar satellites (TerraSAR-X and TanDEM-X will map the Earth in a resolution and accuracy with an absolute height error of 10m and a relative height error of 2m for 90% of the data. In order to fulfill the height requirements in general two global coverages are acquired and processed. Besides the final TanDEM-X DEM, an intermediate DEM with reduced accuracy is produced after the first coverage is completed. The last step in the whole workflow for generating the TanDEM-X DEM is the calibration of remaining systematic height errors and the merge of single acquisitions to 1°x1° DEM tiles. In this paper the current status of generating the intermediate DEM and first validation results based on GPS tracks, laser scanning DEMs, SRTM data and ICESat points are shown for different test sites.

  3. Modelling above Ground Biomass in Tanzanian Miombo Woodlands Using TanDEM-X WorldDEM and Field Data

    Directory of Open Access Journals (Sweden)

    Stefano Puliti

    2017-09-01

    Full Text Available The use of Interferometric Synthetic Aperture Radar (InSAR data has great potential for monitoring large scale forest above ground biomass (AGB in the tropics due to the increased ability to retrieve 3D information even under cloud cover. To date; results in tropical forests have been inconsistent and further knowledge on the accuracy of models linking AGB and InSAR height data is crucial for the development of large scale forest monitoring programs. This study provides an example of the use of TanDEM-X WorldDEM data to model AGB in Tanzanian woodlands. The primary objective was to assess the accuracy of a model linking AGB with InSAR height from WorldDEM after the subtraction of ground heights. The secondary objective was to assess the possibility of obtaining InSAR height for field plots when the terrain heights were derived from global navigation satellite systems (GNSS; i.e., as an alternative to using airborne laser scanning (ALS. The results revealed that the AGB model using InSAR height had a predictive accuracy of R M S E = 24.1 t·ha−1; or 38.8% of the mean AGB when terrain heights were derived from ALS. The results were similar when using terrain heights from GNSS. The accuracy of the predicted AGB was improved when compared to a previous study using TanDEM-X for a sub-area of the area of interest and was of similar magnitude to what was achieved in the same sub-area using ALS data. Overall; this study sheds new light on the opportunities that arise from the use of InSAR data for large scale AGB modelling in tropical woodlands.

  4. Der Meteorologe : (aus dem Band "V". Tallinn 1998) / Elo Viiding ; aus dem Estnischen von Gisbert Jänicke

    Index Scriptorium Estoniae

    Viiding, Elo, 1974-

    2002-01-01

    Sisu : Die Möglichkeit des Meteorologen = Meteoroloogi võimalikkusest ; "Der Meteorologe kam 1990 in die Stadt..." = "Meteoroloog saabus linna aastal 1990..." ; "Was wäre dir "Arbeit" des Meteorologen..." = "Mis oleks meteoroloogi töö..." ; "Und ein Unglück für den Meteorologen ist es auch..." = "Ja Meteoroloogi õnnetus on veel see..." ; Angst vor dem Altwerden des Meteorologen = Hirm Meteoroloogi vanakssaamise ees ; Fest. Geschenk = Pidu. Kink ; "Wenn der Meteorologe eine Grösse sieht, ist er darüber..." = "Kui meteoroloog näeb suurust, on ta selle kohal..." ; Der Meteorologe wird im Saal erwartet = Meteoroloogi oodatakse saali ; "Das Abkommen mit der Meteorologenerwartung kündigen..." = "Katkestada leping meteoroloogiootusega..." ; "Die "Wege des Herrn" sind der Meteorologe..." = "Looja tee" on Meteoroloog..." ; Von dem Fremden, der im Saal den Meteorologen traf = Võõra lugu, kes Meteoroloogi saalis kohtas ; "Den Fremden hervorzuhusten, der von dem..." = "Köhida enesest välja võõras, kes tahtis teha..." ; Der Fremde beruhigt sich nicht = Võõras ei jää rahule

  5. [Julia Rosche. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext] / Olaf Mertelsmann

    Index Scriptorium Estoniae

    Mertelsmann, Olaf, 1969-

    2014-01-01

    Arvustus: Rosche, Julia. Zwischen den Fronten. Die Rolle Estlands zwischen dem Hitler-Stalin-Pakt und dem Ende des Zweiten Weltkriegs im internationalen Kontext. Diplomica Verlag. Hamburg 2012. Unter demselben Titel mit identischem Text auch: Grin Verlag. München 2013

  6. Research on a dem Coregistration Method Based on the SAR Imaging Geometry

    Science.gov (United States)

    Niu, Y.; Zhao, C.; Zhang, J.; Wang, L.; Li, B.; Fan, L.

    2018-04-01

    Due to the systematic error, especially the horizontal deviation that exists in the multi-source, multi-temporal DEMs (Digital Elevation Models), a method for high precision coregistration is needed. This paper presents a new fast DEM coregistration method based on a given SAR (Synthetic Aperture Radar) imaging geometry to overcome the divergence and time-consuming problem of the conventional DEM coregistration method. First, intensity images are simulated for two DEMs under the given SAR imaging geometry. 2D (Two-dimensional) offsets are estimated in the frequency domain using the intensity cross-correlation operation in the FFT (Fast Fourier Transform) tool, which can greatly accelerate the calculation process. Next, the transformation function between two DEMs is achieved via the robust least-square fitting of 2D polynomial operation. Accordingly, two DEMs can be precisely coregistered. Last, two DEMs, i.e., one high-resolution LiDAR (Light Detection and Ranging) DEM and one low-resolution SRTM (Shutter Radar Topography Mission) DEM, covering the Yangjiao landslide region of Chongqing are taken as an example to test the new method. The results indicate that, in most cases, this new method can achieve not only a result as much as 80 times faster than the minimum elevation difference (Least Z-difference, LZD) DEM registration method, but also more accurate and more reliable results.

  7. Research on the method of extracting DEM based on GBInSAR

    Science.gov (United States)

    Yue, Jianping; Yue, Shun; Qiu, Zhiwei; Wang, Xueqin; Guo, Leping

    2016-05-01

    Precise topographical information has a very important role in geology, hydrology, natural resources survey and deformation monitoring. The extracting DEM technology based on synthetic aperture radar interferometry (InSAR) obtains the three-dimensional elevation of the target area through the phase information of the radar image data. The technology has large-scale, high-precision, all-weather features. By changing track in the location of the ground radar system up and down, it can form spatial baseline. Then we can achieve the DEM of the target area by acquiring image data from different angles. Three-dimensional laser scanning technology can quickly, efficiently and accurately obtain DEM of target area, which can verify the accuracy of DEM extracted by GBInSAR. But research on GBInSAR in extracting DEM of the target area is a little. For lack of theory and lower accuracy problems in extracting DEM based on GBInSAR now, this article conducted research and analysis on its principle deeply. The article extracted the DEM of the target area, combined with GBInSAR data. Then it compared the DEM obtained by GBInSAR with the DEM obtained by three-dimensional laser scan data and made statistical analysis and normal distribution test. The results showed the DEM obtained by GBInSAR was broadly consistent with the DEM obtained by three-dimensional laser scanning. And its accuracy is high. The difference of both DEM approximately obeys normal distribution. It indicated that extracting the DEM of target area based on GBInSAR is feasible and provided the foundation for the promotion and application of GBInSAR.

  8. A coupled DEM-CFD method for impulse wave modelling

    Science.gov (United States)

    Zhao, Tao; Utili, Stefano; Crosta, GiovanBattista

    2015-04-01

    Rockslides can be characterized by a rapid evolution, up to a possible transition into a rock avalanche, which can be associated with an almost instantaneous collapse and spreading. Different examples are available in the literature, but the Vajont rockslide is quite unique for its morphological and geological characteristics, as well as for the type of evolution and the availability of long term monitoring data. This study advocates the use of a DEM-CFD framework for the modelling of the generation of hydrodynamic waves due to the impact of a rapid moving rockslide or rock-debris avalanche. 3D DEM analyses in plane strain by a coupled DEM-CFD code were performed to simulate the rockslide from its onset to the impact with still water and the subsequent wave generation (Zhao et al., 2014). The physical response predicted is in broad agreement with the available observations. The numerical results are compared to those published in the literature and especially to Crosta et al. (2014). According to our results, the maximum computed run up amounts to ca. 120 m and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 m and 190 m respectively). In these simulations, the slope mass is considered permeable, such that the toe region of the slope can move submerged in the reservoir and the impulse water wave can also flow back into the slope mass. However, the upscaling of the grains size in the DEM model leads to an unrealistically high hydraulic conductivity of the model, such that only a small amount of water is splashed onto the northern bank of the Vajont valley. The use of high fluid viscosity and coarse grain model has shown the possibility to model more realistically both the slope and wave motions. However, more detailed slope and fluid properties, and the need for computational efficiency should be considered in future research work. This aspect has also been

  9. 3D DEM analyses of the 1963 Vajont rock slide

    Science.gov (United States)

    Boon, Chia Weng; Houlsby, Guy; Utili, Stefano

    2013-04-01

    The 1963 Vajont rock slide has been modelled using the distinct element method (DEM). The open-source DEM code, YADE (Kozicki & Donzé, 2008), was used together with the contact detection algorithm proposed by Boon et al. (2012). The critical sliding friction angle at the slide surface was sought using a strength reduction approach. A shear-softening contact model was used to model the shear resistance of the clayey layer at the slide surface. The results suggest that the critical sliding friction angle can be conservative if stability analyses are calculated based on the peak friction angles. The water table was assumed to be horizontal and the pore pressure at the clay layer was assumed to be hydrostatic. The influence of reservoir filling was marginal, increasing the sliding friction angle by only 1.6˚. The results of the DEM calculations were found to be sensitive to the orientations of the bedding planes and cross-joints. Finally, the failure mechanism was investigated and arching was found to be present at the bend of the chair-shaped slope. References Boon C.W., Houlsby G.T., Utili S. (2012). A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, vol 44, 73-82, doi.org/10.1016/j.compgeo.2012.03.012. Kozicki, J., & Donzé, F. V. (2008). A new open-source software developed for numerical simulations using discrete modeling methods. Computer Methods in Applied Mechanics and Engineering, 197(49-50), 4429-4443.

  10. Optimization of Particle Search Algorithm for CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    G. Baryshev

    2013-09-01

    Full Text Available Discrete element method has numerous applications in particle physics. However, simulating particles as discrete entities can become costly for large systems. In time-driven DEM simulation most computation time is taken by contact search stage. We propose an efficient collision detection method which is based on sorting particles by their coordinates. Using multiple sorting criteria allows minimizing number of potential neighbours and defines fitness of this approach for simulation of massive systems in 3D. This method is compared to a common approach that consists of placing particles onto a grid of cells. Advantage of the new approach is independence of simulation parameters upon particle radius and domain size.

  11. Der antiskeptische Boden unter dem Gehirn im Tank

    OpenAIRE

    Müller, Olaf L.

    2001-01-01

    Crispin Wright hat die bislang beste Rekonstruktion von Putnams Beweis gegen die skeptische Hypothese vom Gehirn im Tank vorgelegt. Aber selbst in Wrights Fassung hat der Beweis einen Mangel: Er wird mithilfe eines Prädikates wie z.B. "Tiger" geführt und funktioniert nur, wenn man sich darauf verlassen kann, dass es Tiger wirklich gibt. Aber die Skeptikerin bestreitet, über die Existenz von Tigern bescheid zu wissen. Das Problem lässt sich dadurch beheben, dass man den Beweis – statt mit dem ...

  12. The Importance of Precise Digital Elevation Models (DEM) in Modelling Floods

    Science.gov (United States)

    Demir, Gokben; Akyurek, Zuhal

    2016-04-01

    Digital elevation Models (DEM) are important inputs for topography for the accurate modelling of floodplain hydrodynamics. Floodplains have a key role as natural retarding pools which attenuate flood waves and suppress flood peaks. GPS, LIDAR and bathymetric surveys are well known surveying methods to acquire topographic data. It is not only time consuming and expensive to obtain topographic data through surveying but also sometimes impossible for remote areas. In this study it is aimed to present the importance of accurate modelling of topography for flood modelling. The flood modelling for Samsun-Terme in Blacksea region of Turkey is done. One of the DEM is obtained from the point observations retrieved from 1/5000 scaled orthophotos and 1/1000 scaled point elevation data from field surveys at x-sections. The river banks are corrected by using the orthophotos and elevation values. This DEM is named as scaled DEM. The other DEM is obtained from bathymetric surveys. 296 538 number of points and the left/right bank slopes were used to construct the DEM having 1 m spatial resolution and this DEM is named as base DEM. Two DEMs were compared by using 27 x-sections. The maximum difference at thalweg of the river bed is 2m and the minimum difference is 20 cm between two DEMs. The channel conveyance capacity in base DEM is larger than the one in scaled DEM and floodplain is modelled in detail in base DEM. MIKE21 with flexible grid is used in 2- dimensional shallow water flow modelling. The model by using two DEMs were calibrated for a flood event (July 9, 2012). The roughness is considered as the calibration parameter. From comparison of input hydrograph at the upstream of the river and output hydrograph at the downstream of the river, the attenuation is obtained as 91% and 84% for the base DEM and scaled DEM, respectively. The time lag in hydrographs does not show any difference for two DEMs and it is obtained as 3 hours. Maximum flood extents differ for the two DEMs

  13. GPU based contouring method on grid DEM data

    Science.gov (United States)

    Tan, Liheng; Wan, Gang; Li, Feng; Chen, Xiaohui; Du, Wenlong

    2017-08-01

    This paper presents a novel method to generate contour lines from grid DEM data based on the programmable GPU pipeline. The previous contouring approaches often use CPU to construct a finite element mesh from the raw DEM data, and then extract contour segments from the elements. They also need a tracing or sorting strategy to generate the final continuous contours. These approaches can be heavily CPU-costing and time-consuming. Meanwhile the generated contours would be unsmooth if the raw data is sparsely distributed. Unlike the CPU approaches, we employ the GPU's vertex shader to generate a triangular mesh with arbitrary user-defined density, in which the height of each vertex is calculated through a third-order Cardinal spline function. Then in the same frame, segments are extracted from the triangles by the geometry shader, and translated to the CPU-side with an internal order in the GPU's transform feedback stage. Finally we propose a "Grid Sorting" algorithm to achieve the continuous contour lines by travelling the segments only once. Our method makes use of multiple stages of GPU pipeline for computation, which can generate smooth contour lines, and is significantly faster than the previous CPU approaches. The algorithm can be easily implemented with OpenGL 3.3 API or higher on consumer-level PCs.

  14. Effect of aging in HDPE blended with DEM in decalin

    International Nuclear Information System (INIS)

    Silva, P.; Albano, C.; Karam, A.; Vargas, M.G.; Perera, R.

    2006-01-01

    Electron paramagnetic resonance (EPR) was used to study the effect of aging on irradiated samples of high-density polyethylene (HDPE) blended with diethyl maleate (DEM) in different proportions. Initially, we synthesize the HDPE using bis-(cyclopentadienyl) zirconium dichloride and P-MAO. The functionalization of the synthesized HDPE was carried out in a 10% weight/vol of polyethylene in decalin solution using different percentages of diethyl maleate (5, 10, 15 and 30% in weight). The samples were irradiated at 5, 15 and 30 kGy. An exponential decay in the total free radicals concentration was observed in the pure HDPE sample at the 15 and 30 kGy irradiation doses, as it was expected. For the 15 and 30 kGy irradiation doses the HDPE blended with 15 and 30% of DEM in decalin shows an increase in the total free radical concentrations as the storage time is increased. This behavior has been interpreted in terms of trapped free radicals. (Author)

  15. Multi-scale sensitivity analysis of pile installation using DEM

    Science.gov (United States)

    Esposito, Ricardo Gurevitz; Velloso, Raquel Quadros; , Eurípedes do Amaral Vargas, Jr.; Danziger, Bernadete Ragoni

    2017-12-01

    The disturbances experienced by the soil due to the pile installation and dynamic soil-structure interaction still present major challenges to foundation engineers. These phenomena exhibit complex behaviors, difficult to measure in physical tests and to reproduce in numerical models. Due to the simplified approach used by the discrete element method (DEM) to simulate large deformations and nonlinear stress-dilatancy behavior of granular soils, the DEM consists of an excellent tool to investigate these processes. This study presents a sensitivity analysis of the effects of introducing a single pile using the PFC2D software developed by Itasca Co. The different scales investigated in these simulations include point and shaft resistance, alterations in porosity and stress fields and particles displacement. Several simulations were conducted in order to investigate the effects of different numerical approaches showing indications that the method of installation and particle rotation could influence greatly in the conditions around the numerical pile. Minor effects were also noted due to change in penetration velocity and pile-soil friction. The difference in behavior of a moving and a stationary pile shows good qualitative agreement with previous experimental results indicating the necessity of realizing a force equilibrium process prior to any load-test to be simulated.

  16. Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

    Science.gov (United States)

    Hassan, Mahmoud A.

    2004-02-01

    Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

  17. DEM Resolution Impact on the Estimation of the Physical Characteristics of Watersheds by Using SWAT

    Directory of Open Access Journals (Sweden)

    Waranyu Buakhao

    2016-01-01

    Full Text Available A digital elevation model (DEM is an important spatial input for automatic extraction of topographic parameters for the soil and water assessment tool (SWAT. The objective of this study was to investigate the impact of DEM resolution (from 5 to 90 m on the delineation process of a SWAT model with two types of watershed characteristics (flat area and mountain area and three sizes of watershed area (about 20,000, 200,000, and 1,500,000 hectares. The results showed that the total lengths of the streamline, main channel slope, watershed area, and area slope were significantly different when using the DEM datasets to delineate. Delineation using the SRTM DEM (90 m, ASTER DEM (30 m, and LDD DEM (5 m for all watershed characteristics showed that the watershed sizes and shapes obtained were only slightly different, whereas the area slopes obtained were significantly different. The total lengths of the generated streams increased when the resolution of the DEM used was higher. The stream slopes obtained using the small area sizes were insignificant, whereas the slopes obtained using the large area sizes were significantly different. This suggests that water resource model users should use the ASTER DEM as opposed to a finer resolution DEM for model input to save time for the model calibration and validation.

  18. Envolving the Operations of the TerraSAR-X/TanDEM-X Mission Planning System during the TanDEM-X Science Phase

    OpenAIRE

    Stathopoulos, Fotios; Guillermin, Guillaume; Garcia Acero, Carlos; Reich, Karin; Mrowka, Falk

    2016-01-01

    After the successful Global Coverage of the Digital Elevation Model, the TanDEM-X Science phase was initiated in September of 2014, dedicated to the demonstration of innovative techniques and experiments. The TanDEM-X Science phase had a large impact on the TerraSAR-X/TanDEM-X Mission Planning System. The two main challenges were the formation flying changes and the activation of a new acquisition mode, the so called Dual Receive Antenna (DRA) acquisition mode. This paper describes all action...

  19. Uncertainty of soil erosion modelling using open source high resolution and aggregated DEMs

    Directory of Open Access Journals (Sweden)

    Arun Mondal

    2017-05-01

    Full Text Available Digital Elevation Model (DEM is one of the important parameters for soil erosion assessment. Notable uncertainties are observed in this study while using three high resolution open source DEMs. The Revised Universal Soil Loss Equation (RUSLE model has been applied to analysis the assessment of soil erosion uncertainty using open source DEMs (SRTM, ASTER and CARTOSAT and their increasing grid space (pixel size from the actual. The study area is a part of the Narmada river basin in Madhya Pradesh state, which is located in the central part of India and the area covered 20,558 km2. The actual resolution of DEMs is 30 m and their increasing grid spaces are taken as 90, 150, 210, 270 and 330 m for this study. Vertical accuracy of DEMs has been assessed using actual heights of the sample points that have been taken considering planimetric survey based map (toposheet. Elevations of DEMs are converted to the same vertical datum from WGS 84 to MSL (Mean Sea Level, before the accuracy assessment and modelling. Results indicate that the accuracy of the SRTM DEM with the RMSE of 13.31, 14.51, and 18.19 m in 30, 150 and 330 m resolution respectively, is better than the ASTER and the CARTOSAT DEMs. When the grid space of the DEMs increases, the accuracy of the elevation and calculated soil erosion decreases. This study presents a potential uncertainty introduced by open source high resolution DEMs in the accuracy of the soil erosion assessment models. The research provides an analysis of errors in selecting DEMs using the original and increased grid space for soil erosion modelling.

  20. Comparative DEMS study on the electrochemical oxidation of carbon blacks

    DEFF Research Database (Denmark)

    Ashton, Sean James; Arenz, Matthias

    2012-01-01

    Publication year: 2012 Source:Journal of Power Sources, Volume 217 Sean J. Ashton, Matthias Arenz The intention of the study presented here is to compare the electrochemical oxidation tendencies of a pristine Ketjen Black EC300 high surface area (HSA) carbon black, and four graphitised counterparts...... heat-treated between 2100 and 3200 °C, such as those typically used as corrosion resistant carbon (CRC) supports for polymer electrolyte membrane fuel cell (PEMFC) catalysts. A methodology combining cyclic voltammetry (CV) and differential electrochemical mass spectrometry (DEMS) is used, which allows......; however, CRC samples graphitised =2800 °C did not exhibit this same behaviour. Highlights ¿ We quantitatively determine electrooxidation of carbon support materials. ¿ We can distinguish between the total and partial electrooxidation. ¿ Non or mildly heat treated carbon forms passivating layer. ¿ Heat...

  1. Pharmakobotanische Untersuchungen von Lavendelsorten auf dem Plattensee- Plateau

    Directory of Open Access Journals (Sweden)

    Tóth, Frida

    2014-09-01

    Full Text Available Auf dem Hof Dörgicsei Levendula Major GmbH wurden 9 Lavendelsorten (6 Sorten von Lavandula angustifolia und 3 Sorten von Lavandula x intermedia untersucht. Neben den morphologischen und Wachstumseigenschaften wurden auch Frisch- und Trockengewichte bewertet. Quantitative und qualitative Untersuchungen von den Blüten- und Ätherischöldrogen wurden auch durchgeführt. Die statistische Analyse zeigte signifikant höhere Erträge bei den Sorten L. angustifolia ’Essence Purple’ und L. x intermedia ’Edelweiss’. Gehalt und Zusammensetzung von ätherischem Öl war eindeutig bei der Sorte L. angustifolia ’Ellagance Purple’ am günstigsten.

  2. Inferring sediment connectivity from high-resolution DEMs of Difference

    Science.gov (United States)

    Heckmann, Tobias; Vericat, Damià

    2017-04-01

    Topographic changes due to the erosion and deposition of bedrock, sediments and soil can be measured by differencing Digital Elevation Models (DEM) acquired at different points in time. So-called morphological sediment budgets can be computed from such DEMs of Difference (DoD) on an areal rather than a point basis. The advent of high-resolution and highly accurate surveying techniques (e.g. LiDAR, SfM), together with recent advances of survey platforms (e.g. UaVs) provides opportunities to improve the spatial and temporal scale (in terms of extent and resolution), the availability and quality of such measurements. Many studies have used DoD to investigate and interpret the spatial pattern of positive and negative vertical differences in terms of erosion and deposition, or of horizontal movement. Vertical differences can be converted to volumes, and negative (erosion) and positive (deposition) volumetric changes aggregated for spatial units (e.g., landforms, hillslopes, river channels) have been used to compute net balances. We argue that flow routing algorithms common in digital terrain analysis provide a means to enrich DoD-based investigations with some information about (potential) sediment pathways - something that has been widely neglected in previous studies. Where the DoD indicates a positive surface change, flow routing delineates the upslope area where the deposited sediment has potentially been derived from. In the downslope direction, flow routing indicates probable downslope pathways of material eroded/detached/entrained where the DoD shows negative surface change. This material has either been deposited along these pathways or been flushed out of the area of investigation. This is a question of sediment connectivity, a property of a system (i.e. a hillslope, a sub-/catchment) that describes its potential to move sediment through itself. The sediment pathways derived from the DEM are related to structural connectivity, while the spatial pattern of (net

  3. Cross Validation on the Equality of Uav-Based and Contour-Based Dems

    Science.gov (United States)

    Ma, R.; Xu, Z.; Wu, L.; Liu, S.

    2018-04-01

    Unmanned Aerial Vehicles (UAV) have been widely used for Digital Elevation Model (DEM) generation in geographic applications. This paper proposes a novel framework of generating DEM from UAV images. It starts with the generation of the point clouds by image matching, where the flight control data are used as reference for searching for the corresponding images, leading to a significant time saving. Besides, a set of ground control points (GCP) obtained from field surveying are used to transform the point clouds to the user's coordinate system. Following that, we use a multi-feature based supervised classification method for discriminating non-ground points from ground ones. In the end, we generate DEM by constructing triangular irregular networks and rasterization. The experiments are conducted in the east of Jilin province in China, which has been suffered from soil erosion for several years. The quality of UAV based DEM (UAV-DEM) is compared with that generated from contour interpolation (Contour-DEM). The comparison shows a higher resolution, as well as higher accuracy of UAV-DEMs, which contains more geographic information. In addition, the RMSE errors of the UAV-DEMs generated from point clouds with and without GCPs are ±0.5 m and ±20 m, respectively.

  4. Dementia-free life expectancy (demFLE) in the Netherlands

    NARCIS (Netherlands)

    Perenboom, R.J.M.; Boshuizen, H.C.; Breteler, M.M.B.; Alewijn, O.; Water, H.P.A. van de

    1996-01-01

    To gain an insight into the burden of dementia in an aging society, life expectancy with dementia and its counterpart dementia-free life expectancy (DemFLE) in The Netherlands are presented. Sullivan's method was used to calculate DemFLE. For elderly living either independently or in homes for the

  5. INFLUENCE OF DEM IN WATERSHED MANAGEMENT AS FLOOD ZONATION MAPPING

    Directory of Open Access Journals (Sweden)

    M. Alrajhi

    2016-06-01

    Full Text Available Despite of valuable efforts from working groups and research organizations towards flood hazard reduction through its program, still minimal diminution from these hazards has been realized. This is mainly due to the fact that with rapid increase in population and urbanization coupled with climate change, flood hazards are becoming increasingly catastrophic. Therefore there is a need to understand and access flood hazards and develop means to deal with it through proper preparations, and preventive measures. To achieve this aim, Geographical Information System (GIS, geospatial and hydrological models were used as tools to tackle with influence of flash floods in the Kingdom of Saudi Arabia due to existence of large valleys (Wadis which is a matter of great concern. In this research paper, Digital Elevation Models (DEMs of different resolution (30m, 20m,10m and 5m have been used, which have proven to be valuable tool for the topographic parameterization of hydrological models which are the basis for any flood modelling process. The DEM was used as input for performing spatial analysis and obtaining derivative products and delineate watershed characteristics of the study area using ArcGIS desktop and its Arc Hydro extension tools to check comparability of different elevation models for flood Zonation mapping. The derived drainage patterns have been overlaid over aerial imagery of study area, to check influence of greater amount of precipitation which can turn into massive destructions. The flow accumulation maps derived provide zones of highest accumulation and possible flow directions. This approach provide simplified means of predicting extent of inundation during flood events for emergency action especially for large areas because of large coverage area of the remotely sensed data.

  6. Accuracy assessment of the global TanDEM-X Digital Elevation Model with GPS data

    Science.gov (United States)

    Wessel, Birgit; Huber, Martin; Wohlfart, Christian; Marschalk, Ursula; Kosmann, Detlev; Roth, Achim

    2018-05-01

    The primary goal of the German TanDEM-X mission is the generation of a highly accurate and global Digital Elevation Model (DEM) with global accuracies of at least 10 m absolute height error (linear 90% error). The global TanDEM-X DEM acquired with single-pass SAR interferometry was finished in September 2016. This paper provides a unique accuracy assessment of the final TanDEM-X global DEM using two different GPS point reference data sets, which are distributed across all continents, to fully characterize the absolute height error. Firstly, the absolute vertical accuracy is examined by about three million globally distributed kinematic GPS (KGPS) points derived from 19 KGPS tracks covering a total length of about 66,000 km. Secondly, a comparison is performed with more than 23,000 "GPS on Bench Marks" (GPS-on-BM) points provided by the US National Geodetic Survey (NGS) scattered across 14 different land cover types of the US National Land Cover Data base (NLCD). Both GPS comparisons prove an absolute vertical mean error of TanDEM-X DEM smaller than ±0.20 m, a Root Means Square Error (RMSE) smaller than 1.4 m and an excellent absolute 90% linear height error below 2 m. The RMSE values are sensitive to land cover types. For low vegetation the RMSE is ±1.1 m, whereas it is slightly higher for developed areas (±1.4 m) and for forests (±1.8 m). This validation confirms an outstanding absolute height error at 90% confidence level of the global TanDEM-X DEM outperforming the requirement by a factor of five. Due to its extensive and globally distributed reference data sets, this study is of considerable interests for scientific and commercial applications.

  7. OPEN-SOURCE DIGITAL ELEVATION MODEL (DEMs EVALUATION WITH GPS AND LiDAR DATA

    Directory of Open Access Journals (Sweden)

    N. F. Khalid

    2016-09-01

    Full Text Available Advanced Spaceborne Thermal Emission and Reflection Radiometer-Global Digital Elevation Model (ASTER GDEM, Shuttle Radar Topography Mission (SRTM, and Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010 are freely available Digital Elevation Model (DEM datasets for environmental modeling and studies. The quality of spatial resolution and vertical accuracy of the DEM data source has a great influence particularly on the accuracy specifically for inundation mapping. Most of the coastal inundation risk studies used the publicly available DEM to estimated the coastal inundation and associated damaged especially to human population based on the increment of sea level. In this study, the comparison between ground truth data from Global Positioning System (GPS observation and DEM is done to evaluate the accuracy of each DEM. The vertical accuracy of SRTM shows better result against ASTER and GMTED10 with an RMSE of 6.054 m. On top of the accuracy, the correlation of DEM is identified with the high determination of coefficient of 0.912 for SRTM. For coastal zone area, DEMs based on airborne light detection and ranging (LiDAR dataset was used as ground truth data relating to terrain height. In this case, the LiDAR DEM is compared against the new SRTM DEM after applying the scale factor. From the findings, the accuracy of the new DEM model from SRTM can be improved by applying scale factor. The result clearly shows that the value of RMSE exhibit slightly different when it reached 0.503 m. Hence, this new model is the most suitable and meets the accuracy requirement for coastal inundation risk assessment using open source data. The suitability of these datasets for further analysis on coastal management studies is vital to assess the potentially vulnerable areas caused by coastal inundation.

  8. Antarctic 1 km Digital Elevation Model (DEM) from Combined ERS-1 Radar and ICESat Laser Satellite Altimetry

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides a 1 km resolution Digital Elevation Model (DEM) of Antarctica. The DEM combines measurements from the European Remote Sensing Satellite-1...

  9. Original Product Resolution (OPR) Source Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data collection is the Original Product Resolution (OPR) Digital Elevation Model (DEM) as provided to the USGS. This DEM is delivered in the original...

  10. Sensitivity of Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations

    Science.gov (United States)

    2016-06-12

    Particle Size in Discrete Element Method to Particle Gas Method (DEM_PGM) Coupling in Underbody Blast Simulations Venkatesh Babu, Kumar Kulkarni, Sanjay...buried in soil viz., (1) coupled discrete element & particle gas methods (DEM-PGM) and (2) Arbitrary Lagrangian-Eulerian (ALE), are investigated. The...DEM_PGM and identify the limitations/strengths compared to the ALE method. Discrete Element Method (DEM) can model individual particle directly, and

  11. Which DEM is best for analyzing fluvial landscape development in mountainous terrains?

    Science.gov (United States)

    Boulton, Sarah J.; Stokes, Martin

    2018-06-01

    Regional studies of fluvial landforms and long-term (Quaternary) landscape development in remote mountain landscapes routinely use satellite-derived DEM data sets. The SRTM and ASTER DEMs are the most commonly utilised because of their longer availability, free cost, and ease of access. However, rapid technological developments mean that newer and higher resolution DEM data sets such as ALOS World 3D (AW3D) and TanDEM-X are being released to the scientific community. Geomorphologists are thus faced with an increasingly problematic challenge of selecting an appropriate DEM for their landscape analyses. Here, we test the application of four medium resolution DEM products (30 m = SRTM, ASTER, AW3D; 12 m = TanDEM-X) for qualitative and quantitative analysis of a fluvial mountain landscape using the Dades River catchment (High Atlas Mountains, Morocco). This landscape comprises significant DEM remote sensing challenges, notably a high mountain relief, steep slopes, and a deeply incised high sinuosity drainage network with narrow canyon/gorge reaches. Our goal was to see which DEM produced the most representative best fit drainage network and meaningful quantification. To achieve this, we used ArcGIS and Stream Profiler platforms to generate catchment hillshade and slope rasters and to extract drainage network, channel long profile and channel slope, and area data. TanDEM-X produces the clearest landscape representation but with channel routing errors in localised high relief areas. Thirty-metre DEMs are smoother and less detailed, but the AW3D shows the closest fit to the real drainage network configuration. The TanDEM-X elevation values are the closest to field-derived GPS measurements. Long profiles exhibit similar shapes but with minor differences in length, elevation, and the degree of noise/smoothing, with AW3D producing the best representation. Slope-area plots display similarly positioned slope-break knickpoints with modest differences in steepness and concavity

  12. Analysis the Accuracy of Digital Elevation Model (DEM) for Flood Modelling on Lowland Area

    Science.gov (United States)

    Zainol Abidin, Ku Hasna Zainurin Ku; Razi, Mohd Adib Mohammad; Bukari, Saifullizan Mohd

    2018-04-01

    Flood is one type of natural disaster that occurs almost every year in Malaysia. Commonly the lowland areas are the worst affected areas. This kind of disaster is controllable by using an accurate data for proposing any kinds of solutions. Elevation data is one of the data used to produce solutions for flooding. Currently, the research about the application of Digital Elevation Model (DEM) in hydrology was increased where this kind of model will identify the elevation for required areas. University of Tun Hussein Onn Malaysia is one of the lowland areas which facing flood problems on 2006. Therefore, this area was chosen in order to produce DEM which focussed on University Health Centre (PKU) and drainage area around Civil and Environment Faculty (FKAAS). Unmanned Aerial Vehicle used to collect aerial photos data then undergoes a process of generating DEM according to three types of accuracy and quality from Agisoft PhotoScan software. The higher the level of accuracy and quality of DEM produced, the longer time taken to generate a DEM. The reading of the errors created while producing the DEM shows almost 0.01 different. Therefore, it has been identified there are some important parameters which influenced the accuracy of DEM.

  13. Generation and performance assessment of the global TanDEM-X digital elevation model

    Science.gov (United States)

    Rizzoli, Paola; Martone, Michele; Gonzalez, Carolina; Wecklich, Christopher; Borla Tridon, Daniela; Bräutigam, Benjamin; Bachmann, Markus; Schulze, Daniel; Fritz, Thomas; Huber, Martin; Wessel, Birgit; Krieger, Gerhard; Zink, Manfred; Moreira, Alberto

    2017-10-01

    The primary objective of the TanDEM-X mission is the generation of a global, consistent, and high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal is achieved by exploiting the interferometric capabilities of the two twin SAR satellites TerraSAR-X and TanDEM-X, which fly in a close orbit formation, acting as an X-band single-pass interferometer. Between December 2010 and early 2015 all land surfaces have been acquired at least twice, difficult terrain up to seven or eight times. The acquisition strategy, data processing, and DEM calibration and mosaicking have been systematically monitored and optimized throughout the entire mission duration, in order to fulfill the specification. The processing of all data has finally been completed in September 2016 and this paper reports on the final performance of the TanDEM-X global DEM and presents the acquisition and processing strategy which allowed to obtain the final DEM quality. The results confirm the outstanding global accuracy of the delivered product, which can be now utilized for both scientific and commercial applications.

  14. Eröffnung des „Hauses der Astronomie“ auf dem Königsstuhl

    OpenAIRE

    Pössel, Markus; Tschira, Klaus

    2012-01-01

    Mit dem „Haus der Astronomie“ (HdA) auf dem Königsstuhl ist ein neues Zentrum für astronomische Bildungs- und Öffentlichkeitsarbeit in Heidelberg eröffnet. Das Haus der Astronomie ist eine gemeinsame Einrichtung der Max-Planck-Gesellschaft (MPG) und der Klaus Tschira Stiftung unter Beteiligung der Stadt Heidelberg und der Ruperto Carola, deren Zentrum für Astronomie eng mit dem HdA zusammenarbeitet. Ziel des HdA ist es, astronomische Forschung einer breiten Öffentlichkeit in verständlicher Fo...

  15. DEM Simulation of Particle Stratification and Segregation in Stockpile Formation

    Directory of Open Access Journals (Sweden)

    Zhang Dizhe

    2017-01-01

    Full Text Available Granular stockpiles are commonly observed in nature and industry, and their formation has been extensively investigated experimentally and mathematically in the literature. One of the striking features affecting properties of stockpiles are the internal patterns formed by the stratification and segregation processes. In this work, we conduct a numerical study based on DEM (discrete element method model to study the influencing factors and triggering mechanisms of these two phenomena. With the use of a previously developed mixing index, the effects of parameters including size ratio, injection height and mass ratio are investigated. We found that it is a void-filling mechanism that differentiates the motions of particles with different sizes. This mechanism drives the large particles to flow over the pile surface and segregate at the pile bottom, while it also pushes small particles to fill the voids between large particles, giving rise to separate layers. Consequently, this difference in motion will result in the observed stratification and segregation phenomena.

  16. A photogrammetric DEM of Greenland based on 1978-1987 aerial photos: validation and integration with laser altimetry and satellite-derived DEMs

    DEFF Research Database (Denmark)

    Korsgaard, Niels Jákup; Kjær, Kurt H.; Nuth, Christopher

    Here we present a DEM of Greenland covering all ice-free terrain and the margins of the GrIS and local glaciers and ice caps. The DEM is based on the 3534 photos used in the aero-triangulation which were recorded by the Danish Geodata Agency (then the Geodetic Institute) in survey campaigns...... spanning the period 1978-1987. The GrIS is covered tens of kilometers into the interior due to the large footprints of the photos (30 x 30 km) and control provided by the aero-triangulation. Thus, the data are ideal for providing information for analysis of ice marginal elevation change and also control...

  17. 2012 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar DEM: Rogue River Oregon

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset encompasses portions of Coos, Curry, Douglas, Jackson, and Josephine Counties.The bare earth digital elevation model (DEM) represents the earth's surface...

  18. Relative Error Evaluation to Typical Open Global dem Datasets in Shanxi Plateau of China

    Science.gov (United States)

    Zhao, S.; Zhang, S.; Cheng, W.

    2018-04-01

    Produced by radar data or stereo remote sensing image pairs, global DEM datasets are one of the most important types for DEM data. Relative error relates to surface quality created by DEM data, so it relates to geomorphology and hydrologic applications using DEM data. Taking Shanxi Plateau of China as the study area, this research evaluated the relative error to typical open global DEM datasets including Shuttle Radar Terrain Mission (SRTM) data with 1 arc second resolution (SRTM1), SRTM data with 3 arc second resolution (SRTM3), ASTER global DEM data in the second version (GDEM-v2) and ALOS world 3D-30m (AW3D) data. Through process and selection, more than 300,000 ICESat/GLA14 points were used as the GCP data, and the vertical error was computed and compared among four typical global DEM datasets. Then, more than 2,600,000 ICESat/GLA14 point pairs were acquired using the distance threshold between 100 m and 500 m. Meanwhile, the horizontal distance between every point pair was computed, so the relative error was achieved using slope values based on vertical error difference and the horizontal distance of the point pairs. Finally, false slope ratio (FSR) index was computed through analyzing the difference between DEM and ICESat/GLA14 values for every point pair. Both relative error and FSR index were categorically compared for the four DEM datasets under different slope classes. Research results show: Overall, AW3D has the lowest relative error values in mean error, mean absolute error, root mean square error and standard deviation error; then the SRTM1 data, its values are a little higher than AW3D data; the SRTM3 and GDEM-v2 data have the highest relative error values, and the values for the two datasets are similar. Considering different slope conditions, all the four DEM data have better performance in flat areas but worse performance in sloping regions; AW3D has the best performance in all the slope classes, a litter better than SRTM1; with slope increasing

  19. VT Lidar Hydro-flattened DEM (0.7 meter) - 2014 - Chittenden, Lamoille, Orleans, & Washington Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Eastern VT 2014 0.7m and Digital Elevation Model (DEM) dataset of the following...

  20. Evaluation of TanDEMx and SRTM DEM on watershed simulated ...

    Indian Academy of Sciences (India)

    57

    **Department of Environmental and Water Resource Engineering. School of Civil .... Few studies have investigated the impact of DEM on watershed delineation like ..... on Integrating GIS and Environmental Modelling, Santa Fe, New. Mexico.

  1. VT Lidar Hydro-flattened DEM (0.7 meter) - 2015 - Windham County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Windham County 2015 0.7m and Digital Elevation Model (DEM) dataset of the following...

  2. 5 Meter Alaska Digital Elevation Models (DEMs) - USGS National Map 3DEP Downloadable Data Collection

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is comprised of 5-meter ifsar-derived Digital Elevation Models (DEMs) over Alaska only. It is distributed as one-degree blocks with overedge. Horizontal...

  3. Glacier Volume Change Estimation Using Time Series of Improved Aster Dems

    Science.gov (United States)

    Girod, Luc; Nuth, Christopher; Kääb, Andreas

    2016-06-01

    Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) system embarked on the Terra (EOS AM-1) satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC) model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter seems not to be

  4. GLACIER VOLUME CHANGE ESTIMATION USING TIME SERIES OF IMPROVED ASTER DEMS

    Directory of Open Access Journals (Sweden)

    L. Girod

    2016-06-01

    Full Text Available Volume change data is critical to the understanding of glacier response to climate change. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER system embarked on the Terra (EOS AM-1 satellite has been a unique source of systematic stereoscopic images covering the whole globe at 15m resolution and at a consistent quality for over 15 years. While satellite stereo sensors with significantly improved radiometric and spatial resolution are available to date, the potential of ASTER data lies in its long consistent time series that is unrivaled, though not fully exploited for change analysis due to lack of data accuracy and precision. Here, we developed an improved method for ASTER DEM generation and implemented it in the open source photogrammetric library and software suite MicMac. The method relies on the computation of a rational polynomial coefficients (RPC model and the detection and correction of cross-track sensor jitter in order to compute DEMs. ASTER data are strongly affected by attitude jitter, mainly of approximately 4 km and 30 km wavelength, and improving the generation of ASTER DEMs requires removal of this effect. Our sensor modeling does not require ground control points and allows thus potentially for the automatic processing of large data volumes. As a proof of concept, we chose a set of glaciers with reference DEMs available to assess the quality of our measurements. We use time series of ASTER scenes from which we extracted DEMs with a ground sampling distance of 15m. Our method directly measures and accounts for the cross-track component of jitter so that the resulting DEMs are not contaminated by this process. Since the along-track component of jitter has the same direction as the stereo parallaxes, the two cannot be separated and the elevations extracted are thus contaminated by along-track jitter. Initial tests reveal no clear relation between the cross-track and along-track components so that the latter

  5. Sterblichkeit: der paradoxe Kunstgriff des Lebens - Eine Betrachtung vor dem Hintergrund der modernen Biologie

    Science.gov (United States)

    Verbeek, Bernhard

    Leben gibt es auf der Erde seit fast 4 Mio. Jahren, trotz allen Katastrophen. Die Idee des Lebens scheint unsterblich. Der Tod aber offenbar auch. Jedes Lebewesen ist davon bedroht, ja für Menschen und andere "höhere“ Lebewesen ist er im Lebensprogramm eingebaut - todsicher. Diese Tatsache ist alles andere als selbstverständlich. Ist sie überhaupt kompatibel mit dem Prinzip der Evolution, nach dem der am besten Angepasste überlebt?

  6. Uncertainty of SWAT model at different DEM resolutions in a large mountainous watershed.

    Science.gov (United States)

    Zhang, Peipei; Liu, Ruimin; Bao, Yimeng; Wang, Jiawei; Yu, Wenwen; Shen, Zhenyao

    2014-04-15

    The objective of this study was to enhance understanding of the sensitivity of the SWAT model to the resolutions of Digital Elevation Models (DEMs) based on the analysis of multiple evaluation indicators. The Xiangxi River, a large tributary of Three Gorges Reservoir in China, was selected as the study area. A range of 17 DEM spatial resolutions, from 30 to 1000 m, was examined, and the annual and monthly model outputs based on each resolution were compared. The following results were obtained: (i) sediment yield was greatly affected by DEM resolution; (ii) the prediction of dissolved oxygen load was significantly affected by DEM resolutions coarser than 500 m; (iii) Total Nitrogen (TN) load was not greatly affected by the DEM resolution; (iv) Nitrate Nitrogen (NO₃-N) and Total Phosphorus (TP) loads were slightly affected by the DEM resolution; and (v) flow and Ammonia Nitrogen (NH₄-N) load were essentially unaffected by the DEM resolution. The flow and dissolved oxygen load decreased more significantly in the dry season than in the wet and normal seasons. Excluding flow and dissolved oxygen, the uncertainties of the other Hydrology/Non-point Source (H/NPS) pollution indicators were greater in the wet season than in the dry and normal seasons. Considering the temporal distribution uncertainties, the optimal DEM resolutions for flow was 30-200 m, for sediment and TP was 30-100 m, for dissolved oxygen and NO₃-N was 30-300 m, for NH₄-N was 30 to 70 m and for TN was 30-150 m. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. An experimentally validated DEM study of powder mixing in a paddle blade mixer

    OpenAIRE

    Pantaleev, Stefan; Yordanova, Slavina; Janda, Alvaro; Marigo, Michele; Ooi, Jin

    2017-01-01

    An investigation on the predictive capabilities of Discrete Element Method simulations of a powder mixing process in a laboratory scale paddle blade mixer is presented. The visco-elasto-plastic frictional adhesive DEM contactmodel of Thakur et al. (2014) was used to represent the cohesive behaviour of an aluminosilicate powder in which the model parameters were determined using experimental flow energy measurements from the FT4powder rheometer. DEM simulations of the mixing process using the ...

  8. An Investigation into Solution Verification for CFD-DEM

    Energy Technology Data Exchange (ETDEWEB)

    Fullmer, William D. [National Energy Technology Lab. (NETL), AECOM, Morgantown, WV (United States); Musser, Jordan [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2017-10-01

    This report presents the study of the convergence behavior of the computational fluid dynamicsdiscrete element method (CFD-DEM) method, specifically National Energy Technology Laboratory’s (NETL) open source MFiX code (MFiX-DEM) with a diffusion based particle-tocontinuum filtering scheme. In particular, this study focused on determining if the numerical method had a solution in the high-resolution limit where the grid size is smaller than the particle size. To address this uncertainty, fixed particle beds of two primary configurations were studied: i) fictitious beds where the particles are seeded with a random particle generator, and ii) instantaneous snapshots from a transient simulation of an experimentally relevant problem. Both problems considered a uniform inlet boundary and a pressure outflow. The CFD grid was refined from a few particle diameters down to 1/6th of a particle diameter. The pressure drop between two vertical elevations, averaged across the bed cross-section was considered as the system response quantity of interest. A least-squares regression method was used to extrapolate the grid-dependent results to an approximate “grid-free” solution in the limit of infinite resolution. The results show that the diffusion based scheme does yield a converging solution. However, the convergence is more complicated than encountered in simpler, single-phase flow problems showing strong oscillations and, at times, oscillations superimposed on top of globally non-monotonic behavior. The challenging convergence behavior highlights the importance of using at least four grid resolutions in solution verification problems so that (over-determined) regression-based extrapolation methods may be applied to approximate the grid-free solution. The grid-free solution is very important in solution verification and VVUQ exercise in general as the difference between it and the reference solution largely determines the numerical uncertainty. By testing

  9. ASTER Global DEM contribution to GEOSS demonstrates open data sharing

    Science.gov (United States)

    Sohre, T.; Duda, K. A.; Meyer, D. J.; Behnke, J.; Nasa Esdis Lp Daac

    2010-12-01

    across all the GEOSS Societal Benefit areas was shown. The release of the global tiled research-grade DEM resulted in a significant increase in demand for ASTER elevation models, and increased awareness of related products. No cost access to these data has also promoted new applications of remotely sensed data, increasing their use across the full range of the GEOSS societal benefit areas. In addition, the simplified data access and greatly expanded pool of users resulted in a number of suggestions from researchers in many disciplines for possible enhancements to future versions of the ASTER GDEM. The broad distribution of the product can be directly attributed to the adoption of fundamental GEOSS data sharing principles, which are directed toward expanded access by minimizing time delay and cost, thus facilitating data use for education, research, and a range of other applications. The ASTER GDEM demonstrated the need and user demand for an improved global DEM product as well as the added benefit of not only “full and open” distribution, but “free and open” distribution.

  10. DEM simulation of granular flows in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Peng, Chong; Wu, Wei

    2017-04-01

    The main purpose of mass-flow experimental models is abstracting distinctive features of natural granular flows, and allow its systematic study in the laboratory. In this process, particle size, space, time, and stress scales must be considered for the proper representation of specific phenomena [5]. One of the most challenging tasks in small scale models, is matching the range of stresses and strains among the particle and fluid media observed in a field event. Centrifuge modelling offers an alternative to upscale all gravity-driven processes, and it has been recently employed in the simulation of granular flows [1, 2, 3, 6, 7]. Centrifuge scaling principles are presented in Ref. [4], collecting a wide spectrum of static and dynamic models. However, for the case of kinematic processes, the non-uniformity of the centrifugal acceleration field plays a major role (i.e., Coriolis and inertial effects). In this work, we discuss a general formulation for the centrifugal acceleration field, implemented in a discrete element model framework (DEM), and validated with centrifuge experimental results. Conventional DEM simulations relate the volumetric forces as a function of the gravitational force Gp = mpg. However, in the local coordinate system of a rotating centrifuge model, the cylindrical centrifugal acceleration field needs to be included. In this rotating system, the centrifugal acceleration of a particle depends on the rotating speed of the centrifuge, as well as the position and speed of the particle in the rotating model. Therefore, we obtain the formulation of centrifugal acceleration field by coordinate transformation. The numerical model is validated with a series of centrifuge experiments of monodispersed glass beads, flowing down an inclined plane at different acceleration levels and slope angles. Further discussion leads to the numerical parameterization necessary for simulating equivalent granular flows under an augmented acceleration field. The premise of

  11. Modelling of Singapore's topographic transformation based on DEMs

    Science.gov (United States)

    Wang, Tao; Belle, Iris; Hassler, Uta

    2015-02-01

    Singapore's topography has been heavily transformed by industrialization and urbanization processes. To investigate topographic changes and evaluate soil mass flows, historical topographic maps of 1924 and 2012 were employed, and basic topographic features were vectorized. Digital elevation models (DEMs) for the two years were reconstructed based on vector features. Corresponding slope maps, a surface difference map and a scatter plot of elevation changes were generated and used to quantify and categorize the nature of the topographic transformation. The surface difference map is aggregated into five main categories of changes: (1) areas without significant height changes, (2) lowered-down areas where hill ranges were cut down, (3) raised-up areas where valleys and swamps were filled in, (4) reclaimed areas from the sea, and (5) new water-covered areas. Considering spatial proximity and configurations of different types of changes, topographic transformation can be differentiated as either creating inland flat areas or reclaiming new land from the sea. Typical topographic changes are discussed in the context of Singapore's urbanization processes. The two slope maps and elevation histograms show that generally, the topographic surface of Singapore has become flatter and lower since 1924. More than 89% of height changes have happened within a range of 20 m and 95% have been below 40 m. Because of differences in land surveying and map drawing methods, uncertainties and inaccuracies inherent in the 1924 topographic maps are discussed in detail. In this work, a modified version of a traditional scatter plot is used to present height transformation patterns intuitively. This method of deriving categorical maps of topographical changes from a surface difference map can be used in similar studies to qualitatively interpret transformation. Slope maps and histograms were also used jointly to reveal additional patterns of topographic change.

  12. COMPARISON AND CO-REGISTRATION OF DEMS GENERATED FROM HiRISE AND CTX IMAGES

    Directory of Open Access Journals (Sweden)

    Y. Wang

    2016-06-01

    Full Text Available Images from two sensors, the High-Resolution Imaging Science Experiment (HiRISE and the Context Camera (CTX, both on-board the Mars Reconnaissance Orbiter (MRO, were used to generate high-quality DEMs (Digital Elevation Models of the Martian surface. However, there were discrepancies between the DEMs generated from the images acquired by these two sensors due to various reasons, such as variations in boresight alignment between the two sensors during the flight in the complex environment. This paper presents a systematic investigation of the discrepancies between the DEMs generated from the HiRISE and CTX images. A combined adjustment algorithm is presented for the co-registration of HiRISE and CTX DEMs. Experimental analysis was carried out using the HiRISE and CTX images collected at the Mars Rover landing site and several other typical regions. The results indicated that there were systematic offsets between the HiRISE and CTX DEMs in the longitude and latitude directions. However, the offset in the altitude was less obvious. After combined adjustment, the offsets were eliminated and the HiRISE and CTX DEMs were co-registered to each other. The presented research is of significance for the synergistic use of HiRISE and CTX images for precision Mars topographic mapping.

  13. TanDEM-X the Earth surface observation project from space level - basis and mission status

    Directory of Open Access Journals (Sweden)

    Jerzy Wiśniowski

    2015-03-01

    Full Text Available TanDEM-X is DLR (Deutsches Zentrum für Luft- und Raumfahrt the Earth surface observation project using high-resolution SAR interferometry. It opens a new era in space borne radar remote sensing. The system is based on two satellites: TerraSAR-X (TSX and TanDEM-X (TDX flying on the very close, strictly controlled orbits. This paper gives an overview of the radar technology and overview of the TanDEM-X mission concept which is based on several innovative technologies. The primary objective of the mission is to deliver a global digital elevation model (DEM with an unprecedented accuracy, which is equal to or surpass the HRTI-3 specifications (12 m posting, relative height accuracy ±2 m for slope < 20% and ±4 m for slope > 20% [8]. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications.[b]Keywords[/b]: remote sensing, Bistatic SAR, digital elevation model (DEM, Helix formation, SAR interferomery, HRTI-3, synchronization

  14. Acute environmental toxicity and persistence of DEM, a chemical agent simulant: Diethyl malonate. [Diethyl malonate

    Energy Technology Data Exchange (ETDEWEB)

    Cataldo, D.A.; Ligotke, M.W.; Harvey, S.D.; Fellows, R.J.; Li, Shu-mei W.; Van Voris, P.; Wentsel, R.S.

    1990-05-01

    The purpose of the following chemical simulant studies is to assess the potential acute environmental effects and persistence of diethyl malonate (DEM). Deposition velocities for DEM to soil surfaces ranged from 0.04 to 0.2 cm/sec. For foliar surfaces, deposition velocities ranged from 0.0002 cm/sec at low air concentrations to 0.05 cm/sec for high dose levels. The residence times or half-lives of DEM deposited to soils was 2 h for the fast component and 5 to 16 h for the residual material. DEM deposited to foliar surfaces also exhibited biphasic depuration. The half-life of the short residence time component ranged from 1 to 3 h, while the longer time component had half-times of 16 to 242 h. Volatilization and other depuration mechanisms reduce surface contaminant levels in both soils and foliage to less than 1% of initial dose within 96 h. DEM is not phytotoxic at foliar mass loading levels of less than 10 {mu}m/cm{sup 2}. However, severe damage is evident at mass loading levels in excess of 17 {mu}g/cm{sup 2}. Tall fescue and sagebrush were more affected than was short-needle pine, however, mass loading levels were markedly different. Regrowth of tall fescue indicated that the effects of DEM are residual, and growth rates are affected only at higher mass loadings through the second harvest. Results from in vitro testing of DEM indicated concentrations below 500 {mu}g/g dry soil generally did not negatively impact soil microbial activity. Short-term effects of DEM were more profound on soil dehydrogenase activity than on soil phosphatase activity. No enzyme inhibition or enhancement was observed after 28 days in incubation. Results of the earthworm bioassay indicate survival to be 86 and 66% at soil doses of 107 and 204 {mu}g DEM/cm{sup 2}, respectively. At higher dose level, activity or mobility was judged to be affected in over 50% of the individuals. 21 refs., 10 figs., 15 tabs.

  15. Dem Generation from Close-Range Photogrammetry Using Extended Python Photogrammetry Toolbox

    Science.gov (United States)

    Belmonte, A. A.; Biong, M. M. P.; Macatulad, E. G.

    2017-10-01

    Digital elevation models (DEMs) are widely used raster data for different applications concerning terrain, such as for flood modelling, viewshed analysis, mining, land development, engineering design projects, to name a few. DEMs can be obtained through various methods, including topographic survey, LiDAR or photogrammetry, and internet sources. Terrestrial close-range photogrammetry is one of the alternative methods to produce DEMs through the processing of images using photogrammetry software. There are already powerful photogrammetry software that are commercially-available and can produce high-accuracy DEMs. However, this entails corresponding cost. Although, some of these software have free or demo trials, these trials have limits in their usable features and usage time. One alternative is the use of free and open-source software (FOSS), such as the Python Photogrammetry Toolbox (PPT), which provides an interface for performing photogrammetric processes implemented through python script. For relatively small areas such as in mining or construction excavation, a relatively inexpensive, fast and accurate method would be advantageous. In this study, PPT was used to generate 3D point cloud data from images of an open pit excavation. The PPT was extended to add an algorithm converting the generated point cloud data into a usable DEM.

  16. Uncertainty modelling and analysis of volume calculations based on a regular grid digital elevation model (DEM)

    Science.gov (United States)

    Li, Chang; Wang, Qing; Shi, Wenzhong; Zhao, Sisi

    2018-05-01

    The accuracy of earthwork calculations that compute terrain volume is critical to digital terrain analysis (DTA). The uncertainties in volume calculations (VCs) based on a DEM are primarily related to three factors: 1) model error (ME), which is caused by an adopted algorithm for a VC model, 2) discrete error (DE), which is usually caused by DEM resolution and terrain complexity, and 3) propagation error (PE), which is caused by the variables' error. Based on these factors, the uncertainty modelling and analysis of VCs based on a regular grid DEM are investigated in this paper. Especially, how to quantify the uncertainty of VCs is proposed by a confidence interval based on truncation error (TE). In the experiments, the trapezoidal double rule (TDR) and Simpson's double rule (SDR) were used to calculate volume, where the TE is the major ME, and six simulated regular grid DEMs with different terrain complexity and resolution (i.e. DE) were generated by a Gauss synthetic surface to easily obtain the theoretical true value and eliminate the interference of data errors. For PE, Monte-Carlo simulation techniques and spatial autocorrelation were used to represent DEM uncertainty. This study can enrich uncertainty modelling and analysis-related theories of geographic information science.

  17. Identification and delineation of areas flood hazard using high accuracy of DEM data

    Science.gov (United States)

    Riadi, B.; Barus, B.; Widiatmaka; Yanuar, M. J. P.; Pramudya, B.

    2018-05-01

    Flood incidents that often occur in Karawang regency need to be mitigated. These expectations exist on technologies that can predict, anticipate and reduce disaster risks. Flood modeling techniques using Digital Elevation Model (DEM) data can be applied in mitigation activities. High accuracy DEM data used in modeling, will result in better flooding flood models. The result of high accuracy DEM data processing will yield information about surface morphology which can be used to identify indication of flood hazard area. The purpose of this study was to identify and describe flood hazard areas by identifying wetland areas using DEM data and Landsat-8 images. TerraSAR-X high-resolution data is used to detect wetlands from landscapes, while land cover is identified by Landsat image data. The Topography Wetness Index (TWI) method is used to detect and identify wetland areas with basic DEM data, while for land cover analysis using Tasseled Cap Transformation (TCT) method. The result of TWI modeling yields information about potential land of flood. Overlay TWI map with land cover map that produces information that in Karawang regency the most vulnerable areas occur flooding in rice fields. The spatial accuracy of the flood hazard area in this study was 87%.

  18. Automatic relative RPC image model bias compensation through hierarchical image matching for improving DEM quality

    Science.gov (United States)

    Noh, Myoung-Jong; Howat, Ian M.

    2018-02-01

    The quality and efficiency of automated Digital Elevation Model (DEM) extraction from stereoscopic satellite imagery is critically dependent on the accuracy of the sensor model used for co-locating pixels between stereo-pair images. In the absence of ground control or manual tie point selection, errors in the sensor models must be compensated with increased matching search-spaces, increasing both the computation time and the likelihood of spurious matches. Here we present an algorithm for automatically determining and compensating the relative bias in Rational Polynomial Coefficients (RPCs) between stereo-pairs utilizing hierarchical, sub-pixel image matching in object space. We demonstrate the algorithm using a suite of image stereo-pairs from multiple satellites over a range stereo-photogrammetrically challenging polar terrains. Besides providing a validation of the effectiveness of the algorithm for improving DEM quality, experiments with prescribed sensor model errors yield insight into the dependence of DEM characteristics and quality on relative sensor model bias. This algorithm is included in the Surface Extraction through TIN-based Search-space Minimization (SETSM) DEM extraction software package, which is the primary software used for the U.S. National Science Foundation ArcticDEM and Reference Elevation Model of Antarctica (REMA) products.

  19. TecDEM: A MATLAB Based Toolbox for understanding Tectonics from Digital Elevation Models

    Science.gov (United States)

    Shahzad, F.; Mahmood, S. A.; Gloaguen, R.

    2009-04-01

    TecDEM is a MATLAB based tool box for understanding the tectonics from digital elevation models (DEMs) of any area. These DEMs can be derived from data of any spatial resolution (Low, medium and High). In the first step we extract drainage network from the DEMs using flow grid approach. Drainage network is a group of streams having elevation and catchment area information as a function of spatial locations. We implement an array of stream structure to study this drainage network. Knickpoints can be identified on each stream of the drainage network by a graphical user interface and are helpful for understanding stream morphology. Stream profile analysis in steady state condition is applied on all streams to calculate geomorphic parameters and regional uplift rates. Hack index is calculated for all the profiles at a certain interval and over the change of knickpoints. Reports menu of this tool box generates detailed statistics report, complete tabulated report, graphical output of each analyzed stream profile and Hack index profile. All the calculated values are part of stream structure and is saved as .mat file for later use with this tool box. The spatial distribution of geomorphic parameters, uplift rates and knickpoints are exported as a shape files for visualization in professional GIS software. We test this tool box on DEMs from different tectonic settings worldwide and received verifiable results with other studies.

  20. FUSION OF MULTI-SCALE DEMS FROM DESCENT AND NAVCM IMAGES OF CHANG’E-3 USING COMPRESSED SENSING METHOD

    Directory of Open Access Journals (Sweden)

    M. Peng

    2017-07-01

    Full Text Available The multi-source DEMs generated using the images acquired in the descent and landing phase and after landing contain supplementary information, and this makes it possible and beneficial to produce a higher-quality DEM through fusing the multi-scale DEMs. The proposed fusion method consists of three steps. First, source DEMs are split into small DEM patches, then the DEM patches are classified into a few groups by local density peaks clustering. Next, the grouped DEM patches are used for sub-dictionary learning by stochastic coordinate coding. The trained sub-dictionaries are combined into a dictionary for sparse representation. Finally, the simultaneous orthogonal matching pursuit (SOMP algorithm is used to achieve sparse representation. We use the real DEMs generated from Chang’e-3 descent images and navigation camera (Navcam stereo images to validate the proposed method. Through the experiments, we have reconstructed a seamless DEM with the highest resolution and the largest spatial coverage among the input data. The experimental results demonstrated the feasibility of the proposed method.

  1. Blaze-DEMGPU: Modular high performance DEM framework for the GPU architecture

    Directory of Open Access Journals (Sweden)

    Nicolin Govender

    2016-01-01

    Full Text Available Blaze-DEMGPU is a modular GPU based discrete element method (DEM framework that supports polyhedral shaped particles. The high level performance is attributed to the light weight and Single Instruction Multiple Data (SIMD that the GPU architecture offers. Blaze-DEMGPU offers suitable algorithms to conduct DEM simulations on the GPU and these algorithms can be extended and modified. Since a large number of scientific simulations are particle based, many of the algorithms and strategies for GPU implementation present in Blaze-DEMGPU can be applied to other fields. Blaze-DEMGPU will make it easier for new researchers to use high performance GPU computing as well as stimulate wider GPU research efforts by the DEM community.

  2. Granular dynamics, contact mechanics and particle system simulations a DEM study

    CERN Document Server

    Thornton, Colin

    2015-01-01

    This book is devoted to the Discrete Element Method (DEM) technique, a discontinuum modelling approach that takes into account the fact that granular materials are composed of discrete particles which interact with each other at the microscale level. This numerical simulation technique can be used both for dispersed systems in which the particle-particle interactions are collisional and compact systems of particles with multiple enduring contacts. The book provides an extensive and detailed explanation of the theoretical background of DEM. Contact mechanics theories for elastic, elastic-plastic, adhesive elastic and adhesive elastic-plastic particle-particle interactions are presented. Other contact force models are also discussed, including corrections to some of these models as described in the literature, and important areas of further research are identified. A key issue in DEM simulations is whether or not a code can reliably simulate the simplest of systems, namely the single particle oblique impact wit...

  3. Diagnostic of the temperature and differential emission measure (DEM based on Hinode/XRT data

    Directory of Open Access Journals (Sweden)

    P. Rudawy

    2008-10-01

    Full Text Available We discuss here various methodologies and an optimal strategy of the temperature and emission measure diagnostics based on Hinode X-Ray Telescope data. As an example of our results we present the determination of the temperature distribution of the X-rays emitting plasma using a filters ratio method and three various methods of the calculation of the differential emission measure (DEM. We have found that all these methods give results similar to the two filters ratio method. Additionally, all methods of the DEM calculation gave similar solutions. We can state that the majority of the pairs of the Hinode filters allows one to derive the temperature and emission measure in the isothermal plasma approximation using standard diagnostics based on the two filters ratio method. In cases of strong flares one can also expect good conformity of the results obtained using a Withbroe – Sylwester, genetic algorithm and least-squares methods of the DEM evaluation.

  4. FEM × DEM: a new efficient multi-scale approach for geotechnical problems with strain localization

    Directory of Open Access Journals (Sweden)

    Nguyen Trung Kien

    2017-01-01

    Full Text Available The paper presents a multi-scale modeling of Boundary Value Problem (BVP approach involving cohesive-frictional granular materials in the FEM × DEM multi-scale framework. On the DEM side, a 3D model is defined based on the interactions of spherical particles. This DEM model is built through a numerical homogenization process applied to a Volume Element (VE. It is then paired with a Finite Element code. Using this numerical tool that combines two scales within the same framework, we conducted simulations of biaxial and pressuremeter tests on a cohesive-frictional granular medium. In these cases, it is known that strain localization does occur at the macroscopic level, but since FEMs suffer from severe mesh dependency as soon as shear band starts to develop, the second gradient regularization technique has been used. As a consequence, the objectivity of the computation with respect to mesh dependency is restored.

  5. Developmental Eye Movement (DEM Test Norms for Mandarin Chinese-Speaking Chinese Children.

    Directory of Open Access Journals (Sweden)

    Yachun Xie

    Full Text Available The Developmental Eye Movement (DEM test is commonly used as a clinical visual-verbal ocular motor assessment tool to screen and diagnose reading problems at the onset. No established norm exists for using the DEM test with Mandarin Chinese-speaking Chinese children. This study aims to establish the normative values of the DEM test for the Mandarin Chinese-speaking population in China; it also aims to compare the values with three other published norms for English-, Spanish-, and Cantonese-speaking Chinese children. A random stratified sampling method was used to recruit children from eight kindergartens and eight primary schools in the main urban and suburban areas of Nanjing. A total of 1,425 Mandarin Chinese-speaking children aged 5 to 12 years took the DEM test in Mandarin Chinese. A digital recorder was used to record the process. All of the subjects completed a symptomatology survey, and their DEM scores were determined by a trained tester. The scores were computed using the formula in the DEM manual, except that the "vertical scores" were adjusted by taking the vertical errors into consideration. The results were compared with the three other published norms. In our subjects, a general decrease with age was observed for the four eye movement indexes: vertical score, adjusted horizontal score, ratio, and total error. For both the vertical and adjusted horizontal scores, the Mandarin Chinese-speaking children completed the tests much more quickly than the norms for English- and Spanish-speaking children. However, the same group completed the test slightly more slowly than the norms for Cantonese-speaking children. The differences in the means were significant (P0.05; compared with Spanish-speaking children, the scores were statistically significant (P0.05. DEM norms may be affected by differences in language, cultural, and educational systems among various ethnicities. The norms of the DEM test are proposed for use with Mandarin Chinese

  6. How large is the Upper Indus Basin? The pitfalls of auto-delineation using DEMs

    Science.gov (United States)

    Khan, Asif; Richards, Keith S.; Parker, Geoffrey T.; McRobie, Allan; Mukhopadhyay, Biswajit

    2014-02-01

    Extraction of watershed areas from Digital Elevation Models (DEMs) is increasingly required in a variety of environmental analyses. It is facilitated by the availability of DEMs based on remotely sensed data, and by Geographical Information System (GIS) software. However, accurate delineation depends on the quality of the DEM and the methodology adopted. This paper considers automated and supervised delineation in a case study of the Upper Indus Basin (UIB), Pakistan, for which published estimates of the basin area show significant disagreement, ranging from 166,000 to 266,000 km2. Automated delineation used ArcGIS Archydro and hydrology tools applied to three good quality DEMs (two from SRTM data with 90m resolution, and one from 30m resolution ASTER data). Automatic delineation defined a basin area of c.440,000 km2 for the UIB, but included a large area of internal drainage in the western Tibetan Plateau. It is shown that discrepancies between different estimates reflect differences in the initial extent of the DEM used for watershed delineation, and the unchecked effect of iterative pit-filling of the DEM (going beyond the filling of erroneous pixels to filling entire closed basins). For the UIB we have identified critical points where spurious addition of catchment area has arisen, and use Google Earth to examine the geomorphology adjacent to these points, and also examine the basin boundary data provided by the HydroSHEDS database. We show that the Pangong Tso watershed and some other areas in the western Tibetan plateau are not part of the UIB, but are areas of internal drainage. Our best estimate of the area of the Upper Indus Basin (at Besham Qila) is 164,867 km2 based on the SRTM DEM, and 164,853 km2 using the ASTER DEM). This matches the catchment area measured by WAPDA SWHP. An important lesson from this investigation is that one should not rely on automated delineation, as iterative pit-filling can produce spurious drainage networks and basins, when

  7. Evaluation of fracturing process of soft rocks at great depth by AE measurement and DEM simulation

    International Nuclear Information System (INIS)

    Aoki, Kenji; Mito, Yoshitada; Kurokawa, Susumu; Matsui, Hiroya; Niunoya, Sumio; Minami, Masayuki

    2007-01-01

    The authors developed the stress-based evaluation system of EDZ by AE monitoring and Distinct Element Method (DEM) simulation. In order to apply this system to the soft rock site, the authors try to grasp the relationship between AE parameters, stress change and rock fracturing process by performing the high stiffness tri-axial compression tests including AE measurements on the soft rock samples, and its simulations by DEM using bonded particle model. As the result, it is found that change in predominant AE frequency is effective to evaluate fracturing process in sedimentary soft rocks, and the relationship between stress change and fracturing process is also clarified. (author)

  8. Rehkitzrettung mit dem Fliegenden Wildretter: Erfahrungen der ersten Feldeinsätze

    OpenAIRE

    Wimmer, Tilman; Israel, Martin; Haschberger, Peter; Weimann, Anita

    2013-01-01

    Der Fliegende Wildretter des Deutschen Zentrums für Luft- und Raumfahrt ist als prototypische Kleinserie seit dem Jahr 2010 erfolgreich in Deutsch-land und Österreich im Einsatz, um aus der Luft Wildtiere während der Wiesenmahd aufzuspüren, und diese so vor dem Tod durch das Mähwerk zu retten. Der Prototyp basiert auf einem ferngesteuerten Multikopter, der mit mehreren Kameras ausgestattet ist und damit im Flug zuverlässiger und wesentlich schneller Wildtiere er-kennen kann, als dies mit b...

  9. Tropical-forest biomass estimation at X-Band from the spaceborne TanDEM-X interferometer

    Science.gov (United States)

    R. Treuhaft; F. Goncalves; J.R. dos Santos; M. Keller; M. Palace; S.N. Madsen; F. Sullivan; P.M.L.A. Graca

    2014-01-01

    This letter reports the sensitivity of X-band interferometric synthetic aperture radar (InSAR) data from the first dual-spacecraft radar interferometer, TanDEM-X, to variations in tropical-forest aboveground biomass (AGB). It also reports the first tropical-forest AGB estimates fromTanDEM-X data. Tropical forests account for...

  10. High-Accuracy Tidal Flat Digital Elevation Model Construction Using TanDEM-X Science Phase Data

    Science.gov (United States)

    Lee, Seung-Kuk; Ryu, Joo-Hyung

    2017-01-01

    This study explored the feasibility of using TanDEM-X (TDX) interferometric observations of tidal flats for digital elevation model (DEM) construction. Our goal was to generate high-precision DEMs in tidal flat areas, because accurate intertidal zone data are essential for monitoring coastal environment sand erosion processes. To monitor dynamic coastal changes caused by waves, currents, and tides, very accurate DEMs with high spatial resolution are required. The bi- and monostatic modes of the TDX interferometer employed during the TDX science phase provided a great opportunity for highly accurate intertidal DEM construction using radar interferometry with no time lag (bistatic mode) or an approximately 10-s temporal baseline (monostatic mode) between the master and slave synthetic aperture radar image acquisitions. In this study, DEM construction in tidal flat areas was first optimized based on the TDX system parameters used in various TDX modes. We successfully generated intertidal zone DEMs with 57-m spatial resolutions and interferometric height accuracies better than 0.15 m for three representative tidal flats on the west coast of the Korean Peninsula. Finally, we validated these TDX DEMs against real-time kinematic-GPS measurements acquired in two tidal flat areas; the correlation coefficient was 0.97 with a root mean square error of 0.20 m.

  11. Development of a LiDAR derived digital elevation model (DEM) as Input to a METRANS geographic information system (GIS).

    Science.gov (United States)

    2011-05-01

    This report describes an assessment of digital elevation models (DEMs) derived from : LiDAR data for a subset of the Ports of Los Angeles and Long Beach. A methodology : based on Monte Carlo simulation was applied to investigate the accuracy of DEMs ...

  12. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible) by David Fassmann (1725)

    OpenAIRE

    Ekaterina A. Skvortcova

    2017-01-01

    The journal created by David Fassmann (1683–1744), Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987). The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, w...

  13. DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

    Science.gov (United States)

    Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

    2017-06-01

    The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

  14. DEM Simulation of Biaxial Compression Experiments of Inherently Anisotropic Granular Materials and the Boundary Effects

    Directory of Open Access Journals (Sweden)

    Zhao-Xia Tong

    2013-01-01

    Full Text Available The reliability of discrete element method (DEM numerical simulations is significantly dependent on the particle-scale parameters and boundary conditions. To verify the DEM models, two series of biaxial compression tests on ellipse-shaped steel rods are used. The comparisons on the stress-strain relationship, strength, and deformation pattern of experiments and simulations indicate that the DEM models are able to capture the key macro- and micromechanical behavior of inherently anisotropic granular materials with high fidelity. By using the validated DEM models, the boundary effects on the macrodeformation, strain localization, and nonuniformity of stress distribution inside the specimens are investigated using two rigid boundaries and one flexible boundary. The results demonstrate that the boundary condition plays a significant role on the stress-strain relationship and strength of granular materials with inherent fabric anisotropy if the stresses are calculated by the force applied on the wall. However, the responses of the particle assembly measured inside the specimens are almost the same with little influence from the boundary conditions. The peak friction angle obtained from the compression tests with flexible boundary represents the real friction angle of particle assembly. Due to the weak lateral constraints, the degree of stress nonuniformity under flexible boundary is higher than that under rigid boundary.

  15. An Optimal DEM Reconstruction Method for Linear Array Synthetic Aperture Radar Based on Variational Model

    Directory of Open Access Journals (Sweden)

    Shi Jun

    2015-02-01

    Full Text Available Downward-looking Linear Array Synthetic Aperture Radar (LASAR has many potential applications in the topographic mapping, disaster monitoring and reconnaissance applications, especially in the mountainous area. However, limited by the sizes of platforms, its resolution in the linear array direction is always far lower than those in the range and azimuth directions. This disadvantage leads to the blurring of Three-Dimensional (3D images in the linear array direction, and restricts the application of LASAR. To date, the research on 3D SAR image enhancement has focused on the sparse recovery technique. In this case, the one-to-one mapping of Digital Elevation Model (DEM brakes down. To overcome this, an optimal DEM reconstruction method for LASAR based on the variational model is discussed in an effort to optimize the DEM and the associated scattering coefficient map, and to minimize the Mean Square Error (MSE. Using simulation experiments, it is found that the variational model is more suitable for DEM enhancement applications to all kinds of terrains compared with the Orthogonal Matching Pursuit (OMPand Least Absolute Shrinkage and Selection Operator (LASSO methods.

  16. Modeling bubble heat transfer in gas-solid fluidized beds using DEM

    NARCIS (Netherlands)

    Patil, A.V.; Peters, E.A.J.F.; Kolkman, T.; Kuipers, J.A.M.

    2014-01-01

    Discrete element method (DEM) simulations of a pseudo 2-D fluidized bed at non-isothermal conditions are presented. First implementation details are discussed. This is followed by a validation study where heating of a packed column by a flow of heated fluid is considered. Next hot gas injected into

  17. Rockslide and Impulse Wave Modelling in the Vajont Reservoir by DEM-CFD Analyses

    Science.gov (United States)

    Zhao, T.; Utili, S.; Crosta, G. B.

    2016-06-01

    This paper investigates the generation of hydrodynamic water waves due to rockslides plunging into a water reservoir. Quasi-3D DEM analyses in plane strain by a coupled DEM-CFD code are adopted to simulate the rockslide from its onset to the impact with the still water and the subsequent generation of the wave. The employed numerical tools and upscaling of hydraulic properties allow predicting a physical response in broad agreement with the observations notwithstanding the assumptions and characteristics of the adopted methods. The results obtained by the DEM-CFD coupled approach are compared to those published in the literature and those presented by Crosta et al. (Landslide spreading, impulse waves and modelling of the Vajont rockslide. Rock mechanics, 2014) in a companion paper obtained through an ALE-FEM method. Analyses performed along two cross sections are representative of the limit conditions of the eastern and western slope sectors. The max rockslide average velocity and the water wave velocity reach ca. 22 and 20 m/s, respectively. The maximum computed run up amounts to ca. 120 and 170 m for the eastern and western lobe cross sections, respectively. These values are reasonably similar to those recorded during the event (i.e. ca. 130 and 190 m, respectively). Therefore, the overall study lays out a possible DEM-CFD framework for the modelling of the generation of the hydrodynamic wave due to the impact of a rapid moving rockslide or rock-debris avalanche.

  18. Landsat 5 TM images and DEM in lithologic mapping of Payen Volcanic Field (Mendoza Province, Argentina)

    International Nuclear Information System (INIS)

    Fornaciai, A.; Bisson, M.; Mazzarini, F.; Del Carlo, P.; Pasquare, G.

    2009-01-01

    Satellite image such as Landsat 5 TM scene provides excellent representation of Earth and synoptic view of large geographic areas in different band combination. Landsat TM images allow automatic and semi-automatic classification of land cover, nevertheless the software frequently may some difficulties in distinguishing between similar radiometric surfaces. In this case, the use of Digital Elevation Model (DEM) can be an important tool to identify different surface covers. In this study, several False Color Composite (FCC) of Landsat 5 TM Image, DEM and the respective draped image of them, were used to delineate lithological boundaries and tectonic features of regional significance of the Paven Volcanic Field (PVF). PFV is a Quaternary fissural structure belonging to the black-arc extensional areas of the Andes in the Mendoza Province (Argentina) characterized by many composite basaltic lava flow fields. The necessity to identify different lava flows with the same composition, and then with same spectral features, allows to highlight the improvement of synergic use of TM images and shaded DEM in the visual interpretation. Information obtained from Satellite data and DEM have been compared with previous geological maps and transferred into a topographical base map. Based on these data a new lithological map at 1:100.000 scale has been presented [it

  19. Discrete element simulation of mill charge in 3D using the BLAZE-DEM GPU framework

    CSIR Research Space (South Africa)

    Govender, Nicolin

    2015-08-01

    Full Text Available The Discrete Element Method (DEM) simulation of charge motion in ball, semi autogenous (SAG) and autogenous mills has advanced to a stage where the effects of lifter design, power draft and product size can be evaluated with sufficient accuracy...

  20. Die Geburt des Kosmos aus dem Nichts die Theorie des inflationären Universums

    CERN Document Server

    Guth, Alan

    2002-01-01

    Selten wird die Wissenschaft über Nacht so stark revolutioniert wie die Kosmologie durch Alan Guths Entdeckung der inflationären Theorie des Universums. Noch seltener gelingt es dem Urheber einer solchen Revolution, eine derart verständliche und einprägsame Darstellung von einer der aufregendsten Epochen in der modernen Kosmologie zu geben. Sogar Kenner werden Neues lernen.

  1. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Czech Academy of Sciences Publication Activity Database

    Prokešová, R.; Kardoš, M.; Tábořík, Petr; Medveďová, A.; Stacke, V.; Chudý, F.

    2014-01-01

    Roč. 224, NOV 1 (2014), s. 86-101 ISSN 0169-555X R&D Projects: GA MŠk LM2010008 Institutional support: RVO:67985891 Keywords : earthflow * surface displacement * strain modelling * DEM differencing * kinematic behaviour Subject RIV: DE - Earth Magnetism, Geodesy, Geography Impact factor: 2.577, year: 2013

  2. Impact of mesh and DEM resolutions in SEM simulation of 3D seismic response

    NARCIS (Netherlands)

    Khan, Saad; van der Meijde, M.; van der Werff, H.M.A.; Shafique, Muhammad

    2017-01-01

    This study shows that the resolution of a digital elevation model (DEM) and model mesh strongly influences 3D simulations of seismic response. Topographic heterogeneity scatters seismic waves and causes variation in seismic response (am-plification and deamplification of seismic amplitudes) at the

  3. Estimating Horizontal Displacement between DEMs by Means of Particle Image Velocimetry Techniques

    Directory of Open Access Journals (Sweden)

    Juan F. Reinoso

    2015-12-01

    Full Text Available To date, digital terrain model (DTM accuracy has been studied almost exclusively by computing its height variable. However, the largely ignored horizontal component bears a great influence on the positional accuracy of certain linear features, e.g., in hydrological features. In an effort to fill this gap, we propose a means of measurement different from the geomatic approach, involving fluid mechanics (water and air flows or aerodynamics. The particle image velocimetry (PIV algorithm is proposed as an estimator of horizontal differences between digital elevation models (DEM in grid format. After applying a scale factor to the displacement estimated by the PIV algorithm, the mean error predicted is around one-seventh of the cell size of the DEM with the greatest spatial resolution, and around one-nineteenth of the cell size of the DEM with the least spatial resolution. Our methodology allows all kinds of DTMs to be compared once they are transformed into DEM format, while also allowing comparison of data from diverse capture methods, i.e., LiDAR versus photogrammetric data sources.

  4. Use of DEMs Derived from TLS and HRSI Data for Landslide Feature Recognition

    Directory of Open Access Journals (Sweden)

    Maurizio Barbarella

    2018-04-01

    Full Text Available This paper addresses the problems arising from the use of data acquired with two different remote sensing techniques—high-resolution satellite imagery (HRSI and terrestrial laser scanning (TLS—for the extraction of digital elevation models (DEMs used in the geomorphological analysis and recognition of landslides, taking into account the uncertainties associated with DEM production. In order to obtain a georeferenced and edited point cloud, the two data sets require quite different processes, which are more complex for satellite images than for TLS data. The differences between the two processes are highlighted. The point clouds are interpolated on a DEM with a 1 m grid size using kriging. Starting from these DEMs, a number of contour, slope, and aspect maps are extracted, together with their associated uncertainty maps. Comparative analysis of selected landslide features drawn from the two data sources allows recognition and classification of hierarchical and multiscale landslide components. Taking into account the uncertainty related to the map enables areas to be located for which one data source was able to give more reliable results than another. Our case study is located in Southern Italy, in an area known for active landslides.

  5. Demência na doença de Parkinson Dementia in Parkinsn's disease

    Directory of Open Access Journals (Sweden)

    Leonardo Caixeta

    2008-12-01

    Full Text Available OBJETIVO: A presença de síndromes psiquiátricas, incluindo demência, associada a distúrbios motores tem sido cada vez mais reconhecida durante a última década, com destaque para o prejuízo cognitivo na doença de Parkinson idiopática. Esta revisão enfocará a epidemiologia, os aspectos clínicos, diagnósticos diferenciais, mecanismos subjacentes e o tratamento da demência na doença de Parkinson idiopática. MÉTODO: Uma revisão da literatura dos estudos que investigaram a demência da doença de Parkinson idiopática foi realizada. RESULTADOS: A demência é altamente prevalente na doença de Parkinson idiopática. O protótipo da demência na doença de Parkinson idiopática consiste numa síndrome disexecutiva com comprometimento da atenção, funções executivas e, secundariamente, a memória. Neuroquimicamente, o déficit mais significativo parece ser colinérgico; a demência se correlaciona com a presença de corpos de Lewy corticais e límbicos. Evidências preliminares sugerem que os anticolinesterásicos podem ser efetivos na demência da doença de Parkinson idiopática. CONCLUSÕES: O prejuízo cognitivo na doença de Parkinson idiopática é associado a características próprias e é responsável por importante incapacidade nestes pacientes.OBJECTIVE: The concomitant presence of psychiatric syndromes, including dementia, with motor disturbance has been increasingly recognized during the last decade, with emphasis on cognitive impairment in idiopatic Parkinson's disease. This review will focus on the epidemiology, clinical aspects, differential diagnosis, underlying mechanisms and treatment of dementia in Parkinson's disease. METHOD: A literature review of the studies that investigated the dementia in Parkinson's disease was performed. RESULTS: Dementia is highly prevalent in Parkinson's disease. The prototype of dementia in Parkinson's disease is a dysexecutive syndrome with impaired attention, executive functions and

  6. Effect of DEM resolution and comparison between different weighting factors for hydrologic connectivity index

    Science.gov (United States)

    Cantreul, Vincent; Cavalli, Marco; Degré, Aurore

    2016-04-01

    The emerging concept of hydrological connectivity is difficult to quantify. Some indices have been proposed. The most cited is Borselli's one. It mainly uses the DEM as input. The pixel size may strongly impacts the result of the calculation. It has not been studied yet in silty areas. Another important aspect is the choice of the weighting factor which strongly influences the index value. The objective of this poster is so to compare 8 different DEM's resolutions (12, 24, 48, 72, 96, 204, 504 and 996cm) and 3 different weighting factors (factor C of Wischmeier, Manning's factor and rugosity index) in the Borselli's index calculation. The IC was calculated in a 124ha catchment (Hevillers), in the loess belt, in Belgium. The DEM used is coming from a UAV with a maximum resolution of 12 cm. Permanent covered surfaces are not considered in order to avoid artefact due to the vegetation (2% of the surface). Regarding the DEM pixel size, the IC increases for a given pixel when the pixel size decreases. That confirms some results observed in the Alpine region by Cavalli (2014). The mean difference between 12 cm and 10 m resolution is 35% with higher values up to 100% for higher connectivity zones (flow paths). Another result is the lower impact of connections in the watershed (grass strips…) at lower pixel sizes. This is linked to the small width of some connections which are sometimes comparing to cell size. Furthermore, a great loss of precision is observed from the 500 cm pixel size and upper. That remark is quite intuitive. Finally, some very well disconnected zones appear for the highest resolutions. Regarding the weighting factor, IC values calculated using C factor are lower than with the rugosity index which is only a topographic factor. With very high resolution DEM, it permits to represent the fine topography. For the C factor, the zones up to very well disconnected areas (grass strips, wood…) are well represented with lower index values than downstream

  7. DemQSAR: predicting human volume of distribution and clearance of drugs.

    Science.gov (United States)

    Demir-Kavuk, Ozgur; Bentzien, Jörg; Muegge, Ingo; Knapp, Ernst-Walter

    2011-12-01

    In silico methods characterizing molecular compounds with respect to pharmacologically relevant properties can accelerate the identification of new drugs and reduce their development costs. Quantitative structure-activity/-property relationship (QSAR/QSPR) correlate structure and physico-chemical properties of molecular compounds with a specific functional activity/property under study. Typically a large number of molecular features are generated for the compounds. In many cases the number of generated features exceeds the number of molecular compounds with known property values that are available for learning. Machine learning methods tend to overfit the training data in such situations, i.e. the method adjusts to very specific features of the training data, which are not characteristic for the considered property. This problem can be alleviated by diminishing the influence of unimportant, redundant or even misleading features. A better strategy is to eliminate such features completely. Ideally, a molecular property can be described by a small number of features that are chemically interpretable. The purpose of the present contribution is to provide a predictive modeling approach, which combines feature generation, feature selection, model building and control of overtraining into a single application called DemQSAR. DemQSAR is used to predict human volume of distribution (VD(ss)) and human clearance (CL). To control overtraining, quadratic and linear regularization terms were employed. A recursive feature selection approach is used to reduce the number of descriptors. The prediction performance is as good as the best predictions reported in the recent literature. The example presented here demonstrates that DemQSAR can generate a model that uses very few features while maintaining high predictive power. A standalone DemQSAR Java application for model building of any user defined property as well as a web interface for the prediction of human VD(ss) and CL is

  8. DEM GENERATION FROM HIGH RESOLUTION SATELLITE IMAGES THROUGH A NEW 3D LEAST SQUARES MATCHING ALGORITHM

    Directory of Open Access Journals (Sweden)

    T. Kim

    2012-09-01

    Full Text Available Automated generation of digital elevation models (DEMs from high resolution satellite images (HRSIs has been an active research topic for many years. However, stereo matching of HRSIs, in particular based on image-space search, is still difficult due to occlusions and building facades within them. Object-space matching schemes, proposed to overcome these problem, often are very time consuming and critical to the dimensions of voxels. In this paper, we tried a new least square matching (LSM algorithm that works in a 3D object space. The algorithm starts with an initial height value on one location of the object space. From this 3D point, the left and right image points are projected. The true height is calculated by iterative least squares estimation based on the grey level differences between the left and right patches centred on the projected left and right points. We tested the 3D LSM to the Worldview images over 'Terrassa Sud' provided by the ISPRS WG I/4. We also compared the performance of the 3D LSM with the correlation matching based on 2D image space and the correlation matching based on 3D object space. The accuracy of the DEM from each method was analysed against the ground truth. Test results showed that 3D LSM offers more accurate DEMs over the conventional matching algorithms. Results also showed that 3D LSM is sensitive to the accuracy of initial height value to start the estimation. We combined the 3D COM and 3D LSM for accurate and robust DEM generation from HRSIs. The major contribution of this paper is that we proposed and validated that LSM can be applied to object space and that the combination of 3D correlation and 3D LSM can be a good solution for automated DEM generation from HRSIs.

  9. A new DEM of the Austfonna ice cap by combining differential SAR interferometry with ICESat laser altimetry

    Directory of Open Access Journals (Sweden)

    Geir Moholdt

    2012-05-01

    Full Text Available We present a new digital elevation model (DEM of the Austfonna ice cap in the Svalbard Archipelago, Norwegian Arctic. Previous DEMs derived from synthetic aperture radar (SAR and optical shape-from-shading have been tied to airborne radio echo-sounding surface profiles from 1983 which contain an elevation-dependent bias of up to several tens of metres compared with recent elevation data. The new and freely available DEM is constructed purely from spaceborne remote sensing data using differential SAR interferometry (DInSAR in combination with ICESat laser altimetry. Interferograms were generated from pairs of SAR scenes from the one-day repeat tandem phase of the European Remote Sensing Satellites 1/2 (ERS-1/2 in 1996. ICESat elevations from winter 2006–08 were used as ground control points to refine the interferometric baseline. The resulting DEM is validated against the same ground control points and independent surface elevation profiles from Global Navigation Satellite Systems (GNSS and airborne laser altimetry, yielding root mean square (RMS errors of about 10 m in all cases. This quality is sufficient for most glaciological applications, and the new DEM will be a baseline data set for ongoing and future research at Austfonna. The technique of combining satellite DInSAR with high-resolution satellite altimetry for DEM generation might also be a good solution in other glacier regions with similar characteristics, especially when data from TanDEM-X and CryoSat-2 become available.

  10. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM) test in adults with acquired brain injury.

    Science.gov (United States)

    Kapoor, Neera; Ciuffreda, Kenneth Joseph

    This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM) test in the adult, acquired brain injury (ABI) population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Nine adult subjects with mild traumatic brain injury (mTBI) and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading) training program (9.6h total). The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM) test score (ratio, errors) taken before, midway, and immediately following training. For the DEM ratio parameter, improvements were found in 80-89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Copyright © 2017 Spanish General Council of Optometry. All rights reserved.

  11. Micromechanics of non-active clays in saturated state and DEM modelling

    Directory of Open Access Journals (Sweden)

    Pagano Arianna Gea

    2017-01-01

    Full Text Available The paper presents a conceptual micromechanical model for 1-D compression behaviour of non-active clays in saturated state. An experimental investigation was carried out on kaolin clay samples saturated with fluids of different pH and dielectric permittivity. The effect of pore fluid characteristics on one-dimensional compressibility behaviour of kaolin was investigated. A three dimensional Discrete Element Method (DEM was implemented in order to simulate the response of saturated kaolin observed during the experiments. A complex contact model was introduced, considering both the mechanical and physico-chemical microscopic interactions between clay particles. A simple analysis with spherical particles only was performed as a preliminary step in the DEM study in the elastic regime.

  12. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    International Nuclear Information System (INIS)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N.

    2004-01-01

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values

  13. Radiosurgery with the gamma knife; Radiochirurgie mit dem Gamma-Knife

    Energy Technology Data Exchange (ETDEWEB)

    Wowra, B.; Reulen, H.J.

    1996-05-10

    Radiosurgery is a novel modality introduced by the neurosurgeon Lars Leksell. For the most important lesions, (arteriovenous angiomas, benign tumors in the base of the skull, formation of metastases in the brain), radiosurgery is a valuable additional tool in the range of therapies available to the benefit of patients. The gamma knife has been gaining a leading rank in the range of therapies applied in Germany. (orig.) [Deutsch] Radiochirurgie ist ein neues, von dem Neurochirurgen Lars Leksell konzipiertes Prinzip. Bei den wichtigsten Indikationen (arteriovenoese Angiome, gutartige Tumoren der Schaedelbasis, Hirnmetastasen etc.) bereichert und ergaenzt die Radiochirurgie das therapeutische Arsenal der Neurochirurgie zum Vorteil der Patienten betraechtlich. Dem Gamma-Knife kommt jetzt auch in Deutschland ein prominenter Platz unter den verschiedenen radiochirurgischen Verfahren zu. (orig.)

  14. Doppler Centroid Estimation for Airborne SAR Supported by POS and DEM

    Directory of Open Access Journals (Sweden)

    CHENG Chunquan

    2015-05-01

    Full Text Available It is difficult to estimate the Doppler frequency and modulating rate for airborne SAR by using traditional vector method due to instable flight and complex terrain. In this paper, it is qualitatively analyzed that the impacts of POS, DEM and their errors on airborne SAR Doppler parameters. Then an innovative vector method is presented based on the range-coplanarity equation to estimate the Doppler centroid taking the POS and DEM as auxiliary data. The effectiveness of the proposed method is validated and analyzed via the simulation experiments. The theoretical analysis and experimental results show that the method can be used to estimate the Doppler centroid with high accuracy even in the cases of high relief, instable flight, and large squint SAR.

  15. Effect of particle breakage on cyclic densification of ballast: A DEM approach

    International Nuclear Information System (INIS)

    Thakur, P K; Vinod, J S; Indraratna, B

    2010-01-01

    In this paper, an attempt has been made to investigate the effect of particle breakage on densification behaviour of ballast under cyclic loading using Discrete Element Method (DEM). Numerical simulations using PFC 2D have been carried out on an assembly of angular particles with and without incorporation of particle breakage. Two-dimensional projection of angular ballast particles were simulated using clusters of bonded circular particles. Degradation of the bonds within a cluster was considered to represent particle breakage. Clump logic was used to make the cluster of particles unbreakable. DEM simulation results highlight that the particle breakage has a profound influence on the cyclic densification behaviour of ballast. The deformation behaviour exhibited by the assembly with breakage is in good agreement with the laboratory experiments. In addition, the evolution of particle displacement vectors clearly explains the breakage mechanism and associated deformations during cyclic loading.

  16. Numerical modelling of powder caking at REV scale by using DEM

    Science.gov (United States)

    Guessasma, Mohamed; Silva Tavares, Homayra; Afrassiabian, Zahra; Saleh, Khashayar

    2017-06-01

    This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM). In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV), the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation) in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength).

  17. Numerical modelling of powder caking at REV scale by using DEM

    Directory of Open Access Journals (Sweden)

    Guessasma Mohamed

    2017-01-01

    Full Text Available This work deals with numerical simulation of powder caking process caused by capillary condensation phenomenon. Caking consists in unwanted agglomeration of powder particles. This process is often irreversible and not easy to predict. To reproduce mechanism involved by caking phenomenon we have used the Discrete Elements Method (DEM. In the present work, we mainly focus on the role of capillary condensation and subsequent liquid bridge formation within a granular medium exposed to fluctuations of ambient relative humidity. Such bridges cause an attractive force between particles, leading to the formation of a cake with intrinsic physicochemical and mechanical properties. By considering a Representative Elementary Volume (REV, the DEM is then performed by means of a MULTICOR-3D software tacking into account the properties of the cake (degree of saturation in order to establish relationships between the microscopic parameters and the macroscopic behaviour (tensile strength.

  18. Study of the electrooxidation of ethanol on hydrophobic electrodes by DEMS and HPLC

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Pereira, M.; Davila Jimenez, M.; Elizalde, M.P.; Manzo-Robledo, A.; Alonso-Vante, N

    2004-09-15

    The electrochemical oxidation of ethanol in alkaline solution has been studied on Cu-PVC electrode and Ni/Cu-PVC composite electrodes modified by ruthenium nanoparticles. The techniques used were cyclic voltammetry (CV), steady-state potentiostatic method, on line differential electrochemical mass spectrometry (DEMS), and high-performance liquid chromatography (HPLC). The chemical products: acetaldehyde and acetic acid were detected measuring the proper mass charge (m/z) ratios. These products were also confirmed by HPLC. The surface modification of composite electrodes by ruthenium nanoparticles promotes the formation of acetaldehyde. As shown by DEMS, the surface modification shifts the onset potential for oxygen evolution reaction on the Cu-PVC composite electrode towards more anodic values.

  19. Production of 17-O-demethyl-geldanamycin, a cytotoxic ansamycin polyketide, by Streptomyces hygroscopicus DEM20745.

    Science.gov (United States)

    Baksh, Aron; Kepplinger, Bernhard; Isah, Hadiza A; Probert, Michael R; Clegg, William; Wills, Corinne; Goodfellow, Michael; Errington, Jeff; Allenby, Nick; Hall, Michael J

    2017-08-01

    The actinomycete DEM20745, collected from non-rhizosphere soil adjacent to Paraserianthes falactaria trees (Cangkringan, Indonesia), is an efficient producer of the anticancer ansamycin polyketide 17-O-demethyl-geldanamycin (17-O-DMG), a biosynthetic precursor of the Hsp90 inhibitor geldanamycin (GDM). In DEM20745, 17-O-DMG is the major ansamycin product observed reaching a maximum titre of 17 mg/L in the fermentation broth. 17-O-DMG has the potential to be a key starting material for the semi-synthesis of GDM analogues for use in anticancer therapy. Thus, this preferential biosynthesis of 17-O-DMG facilitates easy access to this important molecule and provides further insight in the biosynthesis of the geldanamycins.

  20. Steueroptimierte Alters- und Berufsunfähigkeitsvorsorge nach dem Alterseinkünftegesetz

    OpenAIRE

    Eberhardt, Michael G.

    2007-01-01

    Eine höhere Lebenserwartung bei gleichzeitiger Überalterung der deutschen Gesellschaft sind maßgebliche Gründe eines heute bereits festzustellenden Defizits der gesetzlichen Rentenversicherung. Die jüngste Rentenreform mit dem Altersvermögens- und Alterseinkünftegesetz setzte deshalb maßgebliche Anreize, die Alterssicherung eigenverantwortlich um eine private, staatlich geförderte Vorsorge zu ergänzen. Jedoch mangelt es derzeit vorwiegend an einer fachkundigen Informations- und Beratungsleist...

  1. All you need is shape: Predicting shear banding in sand with LS-DEM

    Science.gov (United States)

    Kawamoto, Reid; Andò, Edward; Viggiani, Gioacchino; Andrade, José E.

    2018-02-01

    This paper presents discrete element method (DEM) simulations with experimental comparisons at multiple length scales-underscoring the crucial role of particle shape. The simulations build on technological advances in the DEM furnished by level sets (LS-DEM), which enable the mathematical representation of the surface of arbitrarily-shaped particles such as grains of sand. We show that this ability to model shape enables unprecedented capture of the mechanics of granular materials across scales ranging from macroscopic behavior to local behavior to particle behavior. Specifically, the model is able to predict the onset and evolution of shear banding in sands, replicating the most advanced high-fidelity experiments in triaxial compression equipped with sequential X-ray tomography imaging. We present comparisons of the model and experiment at an unprecedented level of quantitative agreement-building a one-to-one model where every particle in the more than 53,000-particle array has its own avatar or numerical twin. Furthermore, the boundary conditions of the experiment are faithfully captured by modeling the membrane effect as well as the platen displacement and tilting. The results show a computational tool that can give insight into the physics and mechanics of granular materials undergoing shear deformation and failure, with computational times comparable to those of the experiment. One quantitative measure that is extracted from the LS-DEM simulations that is currently not available experimentally is the evolution of three dimensional force chains inside and outside of the shear band. We show that the rotations on the force chains are correlated to the rotations in stress principal directions.

  2. Thieves, Parent Abusers, Draft Dodgers... and Homicides?:The authenticity of Dem. 24.105

    OpenAIRE

    Canevaro, Mirko

    2013-01-01

    This article discusses the authenticity of the document preserved at Dem. 24.105. This purportedly reports two laws, one about theft and the other about parent abusers, draft dodgers and homicides. Scholars have often believed it to provide reliable information about the procedures of dike klopes, apagoge phonou and apagoge against atimoi. This analysis shows that the document is inconsistent with other, reliable, information about the same topics and its language does not conform to that of ...

  3. CFD-DEM Onset of Motion Analysis for Application to Bed Scour Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Lottes, S. A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    This CFD study with DEM was done as a part of the Federal Highway Administration’s (FHWA’s) effort to improve scour design procedures. The Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) model, available in CD-Adapco’s StarCCM+ software, was used to simulate multiphase systems, mainly those which combine fluids and solids. In this method the motion of discrete solids is accounted for by DEM, which applies Newton's laws of motion to every particle. The flow of the fluid is determined by the local averaged Navier–Stokes equations that can be solved using the traditional CFD approach. The interactions between the fluid phase and solids phase are modeled by use of Newton's third law. The inter-particle contact forces are included in the equations of motion. Soft-particle formulation is used, which allows particles to overlap. In this study DEM was used to model separate sediment grains and spherical particles laying on the bed with the aim to analyze their movement due to flow conditions. Critical shear stress causing the incipient movement of the sediment was established and compared to the available experimental data. An example of scour around a cylindrical pier is considered. Various depths of the scoured bed and flow conditions were taken into account to gain a better understanding of the erosion forces existing around bridge foundations. The decay of these forces with increasing scour depth was quantified with a ‘decay function’, which shows that particles become increasingly less likely to be set in motion by flow forces as a scour hole increases in depth. Computational and experimental examples of the scoured bed around a cylindrical pier are presented.

  4. Deep Convolutional Generative Adversarial Network for Procedural 3D Landscape Generation Based on DEM

    OpenAIRE

    Wulff-Jensen, Andreas; Rant, Niclas Nerup; Møller, Tobias Nordvig; Billeskov, Jonas Aksel

    2018-01-01

    This paper proposes a novel framework for improving procedural generation of 3D landscapes using machine learning. We utilized a Deep Convolutional Generative Adversarial Network (DC-GAN) to generate heightmaps. The network was trained on a dataset consisting of Digital Elevation Maps (DEM) of the alps. During map generation, the batch size and learning rate were optimized for the most efficient and satisfying map production. The diversity of the final output was tested against Perlin noise u...

  5. Combined SDO/AIA, Hinode/XRT and FOXSI-2 microflare observations - DEM analysis and energetics

    Science.gov (United States)

    Panchapakesan, S. A.; Glesener, L.; Vievering, J. T.; Ryan, D.; Christe, S.; Inglis, A. R.; Buitrago-Casas, J. C.; Musset, S.; Krucker, S.

    2017-12-01

    The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket makes directimaging and spectral observation of the Sun in hard X-rays (HXRs) using highlysensitive focusing HXR optics. The second flight of FOXSI was launchedsuccessfully on 11 December 2014 and observed significant HXR emissions duringmicroflares. Some of these flares showed heating up to severalmillion Kelvin and were visible in the Extreme Ultraviolet (EUV) with the AtmosphericImaging Assembly (SDO/AIA). Spectral observations from FOXSI suggest emission upto 10-12 MK. We utilize SDO/AIA EUV, Hinode/XRT soft X-ray, and FOXSI-2 highenergy X-ray observations to derive the differential emission measure (DEM) ofthe microflares. The AIA and XRT observations provide broad temperaturecoverage but are poorly constrained at the hotter end. We therefore use FOXSI-2to better determine the high temperature component, thus producing a moreconstrained DEM than is possible with typically available observations. We usethis more highly constrained DEM to investigate the energetics of the observedmicroflares.

  6. Dissipation consistent fabric tensor definition from DEM to continuum for granular media

    Science.gov (United States)

    Li, X. S.; Dafalias, Y. F.

    2015-05-01

    In elastoplastic soil models aimed at capturing the impact of fabric anisotropy, a necessary ingredient is a measure of anisotropic fabric in the form of an evolving tensor. While it is possible to formulate such a fabric tensor based on indirect phenomenological observations at the continuum level, it is more effective and insightful to have the tensor defined first based on direct particle level microstructural observations and subsequently deduce a corresponding continuum definition. A practical means able to provide such observations, at least in the context of fabric evolution mechanisms, is the discrete element method (DEM). Some DEM defined fabric tensors such as the one based on the statistics of interparticle contact normals have already gained widespread acceptance as a quantitative measure of fabric anisotropy among researchers of granular material behavior. On the other hand, a fabric tensor in continuum elastoplastic modeling has been treated as a tensor-valued internal variable whose evolution must be properly linked to physical dissipation. Accordingly, the adaptation of a DEM fabric tensor definition to a continuum constitutive modeling theory must be thermodynamically consistent in regards to dissipation mechanisms. The present paper addresses this issue in detail, brings up possible pitfalls if such consistency is violated and proposes remedies and guidelines for such adaptation within a recently developed Anisotropic Critical State Theory (ACST) for granular materials.

  7. Drainage network extraction from a high-resolution DEM using parallel programming in the .NET Framework

    Science.gov (United States)

    Du, Chao; Ye, Aizhong; Gan, Yanjun; You, Jinjun; Duan, Qinyun; Ma, Feng; Hou, Jingwen

    2017-12-01

    High-resolution Digital Elevation Models (DEMs) can be used to extract high-accuracy prerequisite drainage networks. A higher resolution represents a larger number of grids. With an increase in the number of grids, the flow direction determination will require substantial computer resources and computing time. Parallel computing is a feasible method with which to resolve this problem. In this paper, we proposed a parallel programming method within the .NET Framework with a C# Compiler in a Windows environment. The basin is divided into sub-basins, and subsequently the different sub-basins operate on multiple threads concurrently to calculate flow directions. The method was applied to calculate the flow direction of the Yellow River basin from 3 arc-second resolution SRTM DEM. Drainage networks were extracted and compared with HydroSHEDS river network to assess their accuracy. The results demonstrate that this method can calculate the flow direction from high-resolution DEMs efficiently and extract high-precision continuous drainage networks.

  8. Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

    International Nuclear Information System (INIS)

    Hovad, E; Walther, J H; Thorborg, J; Hattel, J H; Larsen, P

    2015-01-01

    The DISAMATIC casting process production of sand moulds is simulated with DEM (discrete element method). The main purpose is to simulate the dynamics of the flow of green sand, during the production of the sand mould with DEM. The sand shot is simulated, which is the first stage of the DISAMATIC casting process. Depending on the actual casting geometry the mould can be geometrically quite complex involving e.g. shadowing effects and this is directly reflected in the sand flow during the moulding process. In the present work a mould chamber with “ribs” at the walls is chosen as a baseline geometry to emulate some of these important conditions found in the real moulding process. The sand flow is simulated with the DEM and compared with corresponding video footages from the interior of the chamber during the moulding process. The effect of the rolling resistance and the static friction coefficient is analysed and discussed in relation to the experimental findings. (paper)

  9. Simulation of TanDEM-X interferograms for urban change detection

    Science.gov (United States)

    Welte, Amelie; Hammer, Horst; Thiele, Antje; Hinz, Stefan

    2017-10-01

    Damage detection after natural disasters is one of the remote sensing tasks in which Synthetic Aperture Radar (SAR) sensors play an important role. Since SAR is an active sensor, it can record images at all times of day and in all weather conditions, making it ideally suited for this task. While with the newer generation of SAR satellites such as TerraSAR-X or COSMOSkyMed amplitude change detection has become possible even for urban areas, interferometric phase change detection has not been published widely. This is mainly because of the long revisit times of common SAR sensors leading to temporal decorrelation. This situation has changed dramatically with the advent of the TanDEM-X constellation, which can create single-pass interferograms from space at very high resolutions, avoiding temporal decorrelation almost completely. In this paper the basic structures that are present for any building in InSAR phases, i.e. layover, shadow, and roof areas, are examined. Approaches for their extraction from TanDEM-X interferograms are developed using simulated SAR interferograms. The extracted features of the building signature will in the future be used for urban change detection in real TanDEM-X High Resolution Spotlight interferograms.

  10. A Review of Discrete Element Method (DEM) Particle Shapes and Size Distributions for Lunar Soil

    Science.gov (United States)

    Lane, John E.; Metzger, Philip T.; Wilkinson, R. Allen

    2010-01-01

    As part of ongoing efforts to develop models of lunar soil mechanics, this report reviews two topics that are important to discrete element method (DEM) modeling the behavior of soils (such as lunar soils): (1) methods of modeling particle shapes and (2) analytical representations of particle size distribution. The choice of particle shape complexity is driven primarily by opposing tradeoffs with total number of particles, computer memory, and total simulation computer processing time. The choice is also dependent on available DEM software capabilities. For example, PFC2D/PFC3D and EDEM support clustering of spheres; MIMES incorporates superquadric particle shapes; and BLOKS3D provides polyhedra shapes. Most commercial and custom DEM software supports some type of complex particle shape beyond the standard sphere. Convex polyhedra, clusters of spheres and single parametric particle shapes such as the ellipsoid, polyellipsoid, and superquadric, are all motivated by the desire to introduce asymmetry into the particle shape, as well as edges and corners, in order to better simulate actual granular particle shapes and behavior. An empirical particle size distribution (PSD) formula is shown to fit desert sand data from Bagnold. Particle size data of JSC-1a obtained from a fine particle analyzer at the NASA Kennedy Space Center is also fitted to a similar empirical PSD function.

  11. Bank gully extraction from DEMs utilizing the geomorphologic features of a loess hilly area in China

    Science.gov (United States)

    Yang, Xin; Na, Jiaming; Tang, Guoan; Wang, Tingting; Zhu, Axing

    2018-04-01

    As one of most active gully types in the Chinese Loess Plateau, bank gullies generally indicate soil loss and land degradation. This study addressed the lack of detailed, large scale monitoring of bank gullies and proposed a semi-automatic method for extracting bank gullies, given typical topographic features based on 5 m resolution DEMs. First, channel networks, including bank gullies, are extracted through an iterative channel burn-in algorithm. Second, gully heads are correctly positioned based on the spatial relationship between gully heads and their corresponding gully shoulder lines. Third, bank gullies are distinguished from other gullies using the newly proposed topographic measurement of "relative gully depth (RGD)." The experimental results from the loess hilly area of the Linjiajian watershed in the Chinese Loess Plateau show that the producer accuracy reaches 87.5%. The accuracy is affected by the DEM resolution and RGD parameters, as well as the accuracy of the gully shoulder line. The application in the Madigou watershed with a high DEM resolution validated the duplicability of this method in other areas. The overall performance shows that bank gullies can be extracted with acceptable accuracy over a large area, which provides essential information for research on soil erosion, geomorphology, and environmental ecology.

  12. Pre-2014 mudslides at Oso revealed by InSAR and multi-source DEM analysis

    Science.gov (United States)

    Kim, J. W.; Lu, Z.; QU, F.

    2014-12-01

    The landslide is a process that results in the downward and outward movement of slope-reshaping materials including rocks and soils and annually causes the loss of approximately $3.5 billion and tens of casualties in the United States. The 2014 Oso mudslide was an extreme event costing nearly 40 deaths and damaging civilian properties. Landslides are often unpredictable, but in many cases, catastrophic events are repetitive. Historic record in the Oso mudslide site indicates that there have been serial events in decades, though the extent of sliding events varied from time to time. In our study, the combination of multi-source DEMs, InSAR, and time-series InSAR analysis has enabled to characterize the Oso mudslide. InSAR results from ALOS PALSAR show that there was no significant deformation between mid-2006 and 2011. The combination of time-series InSAR analysis and old-dated DEM indicated revealed topographic changes associated the 2006 sliding event, which is confirmed by the difference of multiple LiDAR DEMs. Precipitation and discharge measurements before the 2006 and 2014 landslide events did not exhibit extremely anomalous records, suggesting the precipitation is not the controlling factor in determining the sliding events at Oso. The lack of surface deformation during 2006-2011 and weak correlation between the precipitation and the sliding event, suggest other factors (such as porosity) might play a critical role on the run-away events at this Oso and other similar landslides.

  13. Calibration of DEM parameters on shear test experiments using Kriging method

    Science.gov (United States)

    Xavier, Bednarek; Sylvain, Martin; Abibatou, Ndiaye; Véronique, Peres; Olivier, Bonnefoy

    2017-06-01

    Calibration of powder mixing simulation using Discrete-Element-Method is still an issue. Achieving good agreement with experimental results is difficult because time-efficient use of DEM involves strong assumptions. This work presents a methodology to calibrate DEM parameters using Efficient Global Optimization (EGO) algorithm based on Kriging interpolation method. Classical shear test experiments are used as calibration experiments. The calibration is made on two parameters - Young modulus and friction coefficient. The determination of the minimal number of grains that has to be used is a critical step. Simulations of a too small amount of grains would indeed not represent the realistic behavior of powder when using huge amout of grains will be strongly time consuming. The optimization goal is the minimization of the objective function which is the distance between simulated and measured behaviors. The EGO algorithm uses the maximization of the Expected Improvement criterion to find next point that has to be simulated. This stochastic criterion handles with the two interpolations made by the Kriging method : prediction of the objective function and estimation of the error made. It is thus able to quantify the improvement in the minimization that new simulations at specified DEM parameters would lead to.

  14. Investigation of the fluidized bed-chemical vapor deposition (FBCVD) process using CFD-DEM method

    International Nuclear Information System (INIS)

    Liu Malin; Liu Rongzheng; Wen Yuanyun; Liu Bing; Shao Youlin

    2014-01-01

    The CFD-DEM-CVD multiscale coupling simulation concept was proposed based on the mass/momentum/energy transfer involved in the FB-CVD process. The pyrolysis process of the reaction gas in the spouted bed can be simulated by CFD method, then the concentration field and velocity field can be extracted and coupled with the particle movement behavior which can be simulated by DEM. Particle deposition process can be described by the CVD model based on particle position, velocity and neighboring gas concentration. This multiscale coupling method can be implemented in the Fluent@-EDEM@ software with their UDF (User Definition Function) and API (Application Programming Interface). Base on the multiscale coupling concept, the criterion for evaluating FB-CVD process is given. At first, the volume in the coating furnace is divided into two parts (active coating area and non-active coating area) based on simulation results of chemical pyrolysis process. Then the residence time of all particles in the active coating area can be obtained using the CFD-DEM simulation method. The residence time distribution can be used as a criterion for evaluating the gas-solid contact efficiency and operation performance of the coating furnace. At last different coating parameters of the coating furnace are compared based on the proposed criterion. And also, the future research emphasis is discussed. (author)

  15. KAJIAN PEMANFAATAN DEM SRTM & GOOGLE EARTH UNTUK PARAMETER PENILAIAN POTENSI KERUGIAN EKONOMI AKIBAT BANJIR ROB

    Directory of Open Access Journals (Sweden)

    Arief L Nugraha

    2013-12-01

    Full Text Available Tidal flood is a significant threat for the economic growth rate in the city of Semarang. The threat mitigation requires planning, thereby reducing the impact of the losses. The availability of global data with free access can provide solutions in disaster management, the data are SRTM DEM and Google Earth. With both of these data can be mapped potential economic losses caused by tidal flooding. With the techniques of remote sensing and GIS to handle the SRTM DEM data and Google Earth, the techniques can be generated maps and models of tidal inundation area maps woke up in the city of Semarang. Analysis of potential economic losses can be calculated by doing an overlay of the two maps generated. The results achieved from this study is SRTM DEM and Google Earth can able to produce thematic maps of situational tidal flood disaster so that it can be used as a parameter value calculation of the potential economic losses. This study also obtain the result that the area of ​​land affected by the tidal flood an area of ​​8339.31 hectares and the number of buildings reaching 78 299 pieces, which the district that has the highest impact on the tidal flood that North Semarang.

  16. A Novel DEM Approach to Simulate Block Propagation on Forested Slopes

    Science.gov (United States)

    Toe, David; Bourrier, Franck; Dorren, Luuk; Berger, Frédéric

    2018-03-01

    In order to model rockfall on forested slopes, we developed a trajectory rockfall model based on the discrete element method (DEM). This model is able to take the complex mechanical processes at work during an impact into account (large deformations, complex contact conditions) and can explicitly simulate block/soil, block/tree contacts as well as contacts between neighbouring trees. In this paper, we describe the DEM model developed and we use it to assess the protective effect of different types of forest. In addition, we compared it with a more classical rockfall simulation model. The results highlight that forests can significantly reduce rockfall hazard and that the spatial structure of coppice forests has to be taken into account in rockfall simulations in order to avoid overestimating the protective role of these forest structures against rockfall hazard. In addition, the protective role of the forests is mainly influenced by the basal area. Finally, the advantages and limitations of the DEM model were compared with classical rockfall modelling approaches.

  17. DEM investigation of weathered rocks using a novel bond contact model

    Directory of Open Access Journals (Sweden)

    Zhenming Shi

    2015-06-01

    Full Text Available The distinct element method (DEM incorporated with a novel bond contact model was applied in this paper to shed light on the microscopic physical origin of macroscopic behaviors of weathered rock, and to achieve the changing laws of microscopic parameters from observed decaying properties of rocks during weathering. The changing laws of macroscopic mechanical properties of typical rocks were summarized based on the existing research achievements. Parametric simulations were then conducted to analyze the relationships between macroscopic and microscopic parameters, and to derive the changing laws of microscopic parameters for the DEM model. Equipped with the microscopic weathering laws, a series of DEM simulations of basic laboratory tests on weathered rock samples was performed in comparison with analytical solutions. The results reveal that the relationships between macroscopic and microscopic parameters of rocks against the weathering period can be successfully attained by parametric simulations. In addition, weathering has a significant impact on both stress–strain relationship and failure pattern of rocks.

  18. VT Data - Lidar Hydro-flattened DEM (0.7m) 2016, Essex, Caledonia, Orange, and Windsor Counties

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Middle CT River subbasin 2016 0.7m and Digital Elevation Model (DEM) dataset of the...

  19. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu; Jiang, Houjun; Liao, Mingsheng; Balz, Timo; Wang, Teng

    2014-01-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  20. Joint use of multi-orbit high-resolution SAR interferometry for DEM generation in mountainous area

    KAUST Repository

    Zhang, Lu

    2014-07-01

    SAR interferometry has long been regarded as an effective tool for wide-area topographic mapping in hilly and mountainous areas. However, quality of InSAR DEM product is usually affected by atmospheric disturbances and decorrelation-induced voids, especially for data acquired in repeat-pass mode. In this paper, we proposed an approach for improved topographic mapping by optimal fusion of multi-orbit InSAR DEMs with correction of atmospheric phase screen (APS). An experimental study with highresolution TerraSAR-X and COSMO-SkyMed datasets covering a mountainous area was carried out to demonstrate the effectiveness of the proposed approach. Validation with a reference DEM of scale 1:50,000 indicated that vertical accuracy of the fused DEM can be better than 5 m.

  1. Extraction and Validation of Geomorphological Features from EU-DEM in The Vicinity of the Mygdonia Basin, Northern Greece

    Science.gov (United States)

    Mouratidis, Antonios; Karadimou, Georgia; Ampatzidis, Dimitrios

    2017-12-01

    The European Union Digital Elevation Model (EU-DEM) is a relatively new, hybrid elevation product, principally based on SRTM DEM and ASTER GDEM data, but also on publically available Russian topographic maps for regions north of 60° N. More specifically, EU-DEM is a Digital Surface Model (DSM) over Europe from the Global Monitoring for Environment and Security (GMES) Reference Data Access (RDA) project - a realisation of the Copernicus (former GMES) programme, managed by the European Commission/DG Enterprise and Industry. Even if EU-DEM is indeed more reliable in terms of elevation accuracy than its constituents, it ought to be noted that it is not representative of the original elevation measurements, but is rather a secondary (mathematical) product. Therefore, for specific applications, such as those of geomorphological interest, artefacts may be induced. To this end, the purpose of this paper is to investigate the performance of EU-DEM for geomorphological applications and compare it against other available datasets, i.e. topographic maps and (almost) global DEMs such as SRTM, ASTER-GDEM and WorldDEM™. This initial investigation is carried out in Central Macedonia, Northern Greece, in the vicinity of the Mygdonia basin, which corresponds to an area of particular interest for several geoscience applications. This area has also been serving as a test site for the systematic validation of DEMs for more than a decade. Consequently, extensive elevation datasets and experience have been accumulated over the years, rendering the evaluation of new elevation products a coherent and useful exercise on a local to regional scale. In this context, relief classification, drainage basin delineation, slope and slope aspect, as well as extraction and classification of drainage network are performed and validated among the aforementioned elevation sources. The achieved results focus on qualitative and quantitative aspects of automatic geomorphological feature extraction from

  2. Combined DEM Extration Method from StereoSAR and InSAR

    Science.gov (United States)

    Zhao, Z.; Zhang, J. X.; Duan, M. Y.; Huang, G. M.; Yang, S. C.

    2015-06-01

    A pair of SAR images acquired from different positions can be used to generate digital elevation model (DEM). Two techniques exploiting this characteristic have been introduced: stereo SAR and interferometric SAR. They permit to recover the third dimension (topography) and, at the same time, to identify the absolute position (geolocation) of pixels included in the imaged area, thus allowing the generation of DEMs. In this paper, StereoSAR and InSAR combined adjustment model are constructed, and unify DEM extraction from InSAR and StereoSAR into the same coordinate system, and then improve three dimensional positioning accuracy of the target. We assume that there are four images 1, 2, 3 and 4. One pair of SAR images 1,2 meet the required conditions for InSAR technology, while the other pair of SAR images 3,4 can form stereo image pairs. The phase model is based on InSAR rigorous imaging geometric model. The master image 1 and the slave image 2 will be used in InSAR processing, but the slave image 2 is only used in the course of establishment, and the pixels of the slave image 2 are relevant to the corresponding pixels of the master image 1 through image coregistration coefficient, and it calculates the corresponding phase. It doesn't require the slave image in the construction of the phase model. In Range-Doppler (RD) model, the range equation and Doppler equation are a function of target geolocation, while in the phase equation, the phase is also a function of target geolocation. We exploit combined adjustment model to deviation of target geolocation, thus the problem of target solution is changed to solve three unkonwns through seven equations. The model was tested for DEM extraction under spaceborne InSAR and StereoSAR data and compared with InSAR and StereoSAR methods respectively. The results showed that the model delivered a better performance on experimental imagery and can be used for DEM extraction applications.

  3. Digital Elevation Model (DEM), DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be used to produced shaded relief maps and contour maps., Published in 2001, 1:24000 (1in=2000ft) scale, Louisiana State University (LSU).

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2001. DEM data are useful for terrain analysis and modeling including slope and aspect calculations. They may be...

  4. FE-DEM Analysis of the Effect of Tread Pattern on the Tractive Performance of Tires Operating on Sand

    Science.gov (United States)

    Nakashima, Hiroshi; Takatsu, Yuzuru; Shinone, Hisanori; Matsukawa, Hisao; Kasetani, Takahiro

    Soil-tire system interaction is a fundamental and important research topic in terramechanics. We applied a 2D finite element, discrete element method (FE-DEM), using FEM for the tire and the bottom soil layer and DEM for the surface soil layer. Satisfactory performance analysis was achieved. In this study, to clarify the capabilities and limitations of the method for soil-tire interaction analysis, the tractive performance of real automobile tires with two different tread patterns—smooth and grooved—was analyzed by FE-DEM, and the numerical results compared with the experimental results obtained using an indoor traction measurement system. The analysis of tractive performance could be performed with sufficient accuracy by the proposed 2D dynamic FE-DEM. FE-DEM obtained larger drawbar pull for a tire with a grooved tread pattern, which was verified by the experimental results. Moreover, the result for the grooved tire showed almost the same gross tractive effort and similar running resistance as in experiments. However, for a tire with smooth tread pattern, the analyzed gross tractive effort and running resistance behaved differently than the experimental results, largely due to the difference in tire sinkage in FE-DEM.

  5. EVALUATION OF AIRBORNE L- BAND MULTI-BASELINE POL-INSAR FOR DEM EXTRACTION BENEATH FOREST CANOPY

    Directory of Open Access Journals (Sweden)

    W. M. Li

    2018-04-01

    Full Text Available DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  6. Evaluation of Airborne l- Band Multi-Baseline Pol-Insar for dem Extraction Beneath Forest Canopy

    Science.gov (United States)

    Li, W. M.; Chen, E. X.; Li, Z. Y.; Jiang, C.; Jia, Y.

    2018-04-01

    DEM beneath forest canopy is difficult to extract with optical stereo pairs, InSAR and Pol-InSAR techniques. Tomographic SAR (TomoSAR) based on different penetration and view angles could reflect vertical structure and ground structure. This paper aims at evaluating the possibility of TomoSAR for underlying DEM extraction. Airborne L-band repeat-pass Pol-InSAR collected in BioSAR 2008 campaign was applied to reconstruct the 3D structure of forest. And sum of kronecker product and algebraic synthesis algorithm were used to extract ground structure, and phase linking algorithm was applied to estimate ground phase. Then Goldstein cut-branch approach was used to unwrap the phases and then estimated underlying DEM. The average difference between the extracted underlying DEM and Lidar DEM is about 3.39 m in our test site. And the result indicates that it is possible for underlying DEM estimation with airborne L-band repeat-pass TomoSAR technique.

  7. On the COSMO-SkyMed Exploitation for Interferometric DEM Generation

    Science.gov (United States)

    Teresa, C. M.; Raffaele, N.; Oscar, N. D.; Fabio, B.

    2011-12-01

    DEM products for Earth observation space-borne applications are being to play a role of increasing importance due to the new generation of high resolution sensors (both optical and SAR). These new sensors demand elevation data for processing and, on the other hand, they provide new possibilities for DEM generation. Till now, for what concerns interferometric DEM, the Shuttle Radar Topography Mission (SRTM) has been the reference product for scientific applications all over the world. SRTM mission [1] had the challenging goal to meet the requirements for a homogeneous and reliable DEM fulfilling the DTED-2 specifications. However, new generation of high resolution sensors (including SAR) pose new requirements for elevation data in terms of vertical precision and spatial resolution. DEM are usually used as ancillary input in different processing steps as for instance geocoding and Differential SAR Interferometry. In this context, the recent SAR missions of DLR (TerraSAR-X and TanDEM-X) and ASI (COSMO-SkyMed) can play a promising role thanks to their high resolution both in space and time. In particular, the present work investigates the potentialities of the COSMO/SkyMed (CSK) constellation for ground elevation measurement with particular attention devoted to the impact of the improved spatial resolution wrt the previous SAR sensors. The recent scientific works, [2] and [3], have shown the advantages of using CSK in the monitoring of terrain deformations caused by landslides, earthquakes, etc. On the other hand, thanks to the high spatial resolution, CSK appears to be very promising in monitoring man-made structures, such as buildings, bridges, railways and highways, thus enabling new potential applications (urban applications, precise DEM, etc.). We present results obtained by processing both SPOTLIGHT and STRIPMAP acquisitions through standard SAR Interferometry as well as multi-pass interferometry [4] with the aim of measuring ground elevation. Acknowledgments

  8. Coastal Digital Elevation Models (DEMs) for tsunami hazard assessment on the French coasts

    Science.gov (United States)

    Maspataud, Aurélie; Biscara, Laurie; Hébert, Hélène; Schmitt, Thierry; Créach, Ronan

    2015-04-01

    Building precise and up-to-date coastal DEMs is a prerequisite for accurate modeling and forecasting of hydrodynamic processes at local scale. Marine flooding, originating from tsunamis, storm surges or waves, is one of them. Some high resolution DEMs are being generated for multiple coast configurations (gulf, embayment, strait, estuary, harbor approaches, low-lying areas…) along French Atlantic and Channel coasts. This work is undertaken within the framework of the TANDEM project (Tsunamis in the Atlantic and the English ChaNnel: Definition of the Effects through numerical Modeling) (2014-2017). DEMs boundaries were defined considering the vicinity of French civil nuclear facilities, site effects considerations and potential tsunamigenic sources. Those were identified from available historical observations. Seamless integrated topographic and bathymetric coastal DEMs will be used by institutions taking part in the study to simulate expected wave height at regional and local scale on the French coasts, for a set of defined scenarii. The main tasks were (1) the development of a new capacity of production of DEM, (2) aiming at the release of high resolution and precision digital field models referred to vertical reference frameworks, that require (3) horizontal and vertical datum conversions (all source elevation data need to be transformed to a common datum), on the basis of (4) the building of (national and/or local) conversion grids of datum relationships based on known measurements. Challenges in coastal DEMs development deal with good practices throughout model development that can help minimizing uncertainties. This is particularly true as scattered elevation data with variable density, from multiple sources (national hydrographic services, state and local government agencies, research organizations and private engineering companies) and from many different types (paper fieldsheets to be digitized, single beam echo sounder, multibeam sonar, airborne laser

  9. Landform classification using a sub-pixel spatial attraction model to increase spatial resolution of digital elevation model (DEM

    Directory of Open Access Journals (Sweden)

    Marzieh Mokarrama

    2018-04-01

    Full Text Available The purpose of the present study is preparing a landform classification by using digital elevation model (DEM which has a high spatial resolution. To reach the mentioned aim, a sub-pixel spatial attraction model was used as a novel method for preparing DEM with a high spatial resolution in the north of Darab, Fars province, Iran. The sub-pixel attraction models convert the pixel into sub-pixels based on the neighboring pixels fraction values, which can only be attracted by a central pixel. Based on this approach, a mere maximum of eight neighboring pixels can be selected for calculating of the attraction value. In the mentioned model, other pixels are supposed to be far from the central pixel to receive any attraction. In the present study by using a sub-pixel attraction model, the spatial resolution of a DEM was increased. The design of the algorithm is accomplished by using a DEM with a spatial resolution of 30 m (the Advanced Space borne Thermal Emission and Reflection Radiometer; (ASTER and a 90 m (the Shuttle Radar Topography Mission; (SRTM. In the attraction model, scale factors of (S = 2, S = 3, and S = 4 with two neighboring methods of touching (T = 1 and quadrant (T = 2 are applied to the DEMs by using MATLAB software. The algorithm is evaluated by taking the best advantages of 487 sample points, which are measured by surveyors. The spatial attraction model with scale factor of (S = 2 gives better results compared to those scale factors which are greater than 2. Besides, the touching neighborhood method is turned to be more accurate than the quadrant method. In fact, dividing each pixel into more than two sub-pixels decreases the accuracy of the resulted DEM. On the other hand, in these cases DEM, is itself in charge of increasing the value of root-mean-square error (RMSE and shows that attraction models could not be used for S which is greater than 2. Thus considering results, the proposed model is highly capable of

  10. A new 100-m Digital Elevation Model of the Antarctic Peninsula derived from ASTER Global DEM: methods and accuracy assessment

    Directory of Open Access Journals (Sweden)

    A. J. Cook

    2012-10-01

    Full Text Available A high resolution surface topography Digital Elevation Model (DEM is required to underpin studies of the complex glacier system on the Antarctic Peninsula. A complete DEM with better than 200 m pixel size and high positional and vertical accuracy would enable mapping of all significant glacial basins and provide a dataset for glacier morphology analyses. No currently available DEM meets these specifications. We present a new 100-m DEM of the Antarctic Peninsula (63–70° S, based on ASTER Global Digital Elevation Model (GDEM data. The raw GDEM products are of high-quality on the rugged terrain and coastal-regions of the Antarctic Peninsula and have good geospatial accuracy, but they also contain large errors on ice-covered terrain and we seek to minimise these artefacts. Conventional data correction techniques do not work so we have developed a method that significantly improves the dataset, smoothing the erroneous regions and hence creating a DEM with a pixel size of 100 m that will be suitable for many glaciological applications. We evaluate the new DEM using ICESat-derived elevations, and perform horizontal and vertical accuracy assessments based on GPS positions, SPOT-5 DEMs and the Landsat Image Mosaic of Antarctica (LIMA imagery. The new DEM has a mean elevation difference of −4 m (± 25 m RMSE from ICESat (compared to −13 m mean and ±97 m RMSE for the original ASTER GDEM, and a horizontal error of less than 2 pixels, although elevation accuracies are lower on mountain peaks and steep-sided slopes. The correction method significantly reduces errors on low relief slopes and therefore the DEM can be regarded as suitable for topographical studies such as measuring the geometry and ice flow properties of glaciers on the Antarctic Peninsula. The DEM is available for download from the NSIDC website: http://nsidc.org/data/nsidc-0516.html (ANALYSIS AND VALIDATION OF GRID DEM GENERATION BASED ON GAUSSIAN MARKOV RANDOM FIELD

    Directory of Open Access Journals (Sweden)

    F. J. Aguilar

    2016-06-01

    Full Text Available Digital Elevation Models (DEMs are considered as one of the most relevant geospatial data to carry out land-cover and land-use classification. This work deals with the application of a mathematical framework based on a Gaussian Markov Random Field (GMRF to interpolate grid DEMs from scattered elevation data. The performance of the GMRF interpolation model was tested on a set of LiDAR data (0.87 points/m2 provided by the Spanish Government (PNOA Programme over a complex working area mainly covered by greenhouses in Almería, Spain. The original LiDAR data was decimated by randomly removing different fractions of the original points (from 10% to up to 99% of points removed. In every case, the remaining points (scattered observed points were used to obtain a 1 m grid spacing GMRF-interpolated Digital Surface Model (DSM whose accuracy was assessed by means of the set of previously extracted checkpoints. The GMRF accuracy results were compared with those provided by the widely known Triangulation with Linear Interpolation (TLI. Finally, the GMRF method was applied to a real-world case consisting of filling the LiDAR-derived DSM gaps after manually filtering out non-ground points to obtain a Digital Terrain Model (DTM. Regarding accuracy, both GMRF and TLI produced visually pleasing and similar results in terms of vertical accuracy. As an added bonus, the GMRF mathematical framework makes possible to both retrieve the estimated uncertainty for every interpolated elevation point (the DEM uncertainty and include break lines or terrain discontinuities between adjacent cells to produce higher quality DTMs.

  11. DEVELOPMENT AND EVALUATION OF SIMPLE MEASUREMENT SYSTEM USING THE OBLIQUE PHOTO AND DEM

    Directory of Open Access Journals (Sweden)

    H. Nonaka

    2016-06-01

    Full Text Available When a disaster occurs, we must grasp and evaluate its damage as soon as possible. Then we try to estimate them from some kind of photographs, such as surveillance camera imagery, satellite imagery, photographs taken from a helicopter and so on. Especially in initial stage, estimation of decent damage situation for a short time is more important than investigation of damage situation for a long time. One of the source of damage situation is the image taken by surveillance camera, satellite sensor and helicopter. If we can measure any targets in these imagery, we can estimate a length of a lava flow, a reach of a cinder and a sediment volume in volcanic eruption or landslide. Therefore in order to measure various information for a short time, we developed a simplified measurement system which uses these photographs. This system requires DEM in addition to photographs, but it is possible to use previously acquired DEM. To measure an object, we require only two steps. One is the determination of the position and the posture in which the photograph is shot. We determine these parameters using DEM. The other step is the measurement of an object in photograph. In this paper, we describe this system and show the experimental results to evaluate this system. In this experiment we measured the top of Mt. Usu by using two measurement method of this system. Then we can measure it about one hour and the difference between the measurement results and the airborne LiDAR data are less than 10 meter.

  12. Numerical probabilistic analysis for slope stability in fractured rock masses using DFN-DEM approach

    Directory of Open Access Journals (Sweden)

    Alireza Baghbanan

    2017-06-01

    Full Text Available Due to existence of uncertainties in input geometrical properties of fractures, there is not any unique solution for assessing the stability of slopes in jointed rock masses. Therefore, the necessity of applying probabilistic analysis in these cases is inevitable. In this study a probabilistic analysis procedure together with relevant algorithms are developed using Discrete Fracture Network-Distinct Element Method (DFN-DEM approach. In the right abutment of Karun 4 dam and downstream of the dam body, five joint sets and one major joint have been identified. According to the geometrical properties of fractures in Karun river valley, instability situations are probable in this abutment. In order to evaluate the stability of the rock slope, different combinations of joint set geometrical parameters are selected, and a series of numerical DEM simulations are performed on generated and validated DFN models in DFN-DEM approach to measure minimum required support patterns in dry and saturated conditions. Results indicate that the distribution of required bolt length is well fitted with a lognormal distribution in both circumstances. In dry conditions, the calculated mean value is 1125.3 m, and more than 80 percent of models need only 1614.99 m of bolts which is a bolt pattern with 2 m spacing and 12 m length. However, as for the slopes with saturated condition, the calculated mean value is 1821.8 m, and more than 80 percent of models need only 2653.49 m of bolts which is equivalent to a bolt pattern with 15 m length and 1.5 m spacing. Comparison between obtained results with numerical and empirical method show that investigation of a slope stability with different DFN realizations which conducted in different block patterns is more efficient than the empirical methods.

  13. Demência como fator de risco para fraturas graves em idosos

    Directory of Open Access Journals (Sweden)

    Carvalho Aline de Mesquita

    2002-01-01

    Full Text Available INTRODUÇÃO: As quedas entre pessoas idosas constituem importante problema de saúde pública devido à sua alta incidência, às complicações para a saúde e aos altos custos assistenciais. O estudo realizado visa a estimar a associação entre demência e ocorrência de quedas e fraturas entre idosos. MÉTODOS: Foi conduzido estudo caso-controle de 404 indivíduos com 60 ou mais anos de idade, da cidade do Rio de Janeiro, Brasil. Casos e controles foram pareados por idade, sexo e hospital. Os dados foram coletados por meio de entrevista estruturada com os idosos. Foram considerados portadores de quadro demencial idosos cuja pontuação no questionário BOAS fosse superior a dois. Foram obtidos odds ratios (OR ajustados por fatores potenciais de confusão, utilizando-se regressão logística condicional. RESULTADOS: As quedas distribuíram-se igualmente entre os períodos da manhã, tarde e noite, havendo uma redução em sua freqüência durante a madrugada. Acidentaram-se dentro de casa 78% dos idosos com demência, contra 55% daqueles sem essa doença. O OR não-ajustado para a associação entre demência e fratura grave foi de 2,0 (IC95%, 1,23-3,25. Após o ajuste por fatores de confusão, houve uma pequena redução dessa associação (OR=1,82, 1,03-3,23. CONCLUSÃO: Idosos com quadro demencial apresentam maior risco de caírem e ser hospitalizados por fratura do que idosos sem demência. Tal fato implica a necessidade de cuidados especiais com esses indivíduos, visando a minimizar o risco desses acidentes.

  14. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    International Nuclear Information System (INIS)

    Seward, F. D.; Charles, P. A.; Foster, D. L.; Dickel, J. R.; Romero, P. S.; Edwards, Z. I.; Perry, M.; Williams, R. M.

    2012-01-01

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M ☉

  15. DEM L241, A SUPERNOVA REMNANT CONTAINING A HIGH-MASS X-RAY BINARY

    Energy Technology Data Exchange (ETDEWEB)

    Seward, F. D. [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Charles, P. A. [School of Physics and Astronomy, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Foster, D. L. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935, Cape Town (South Africa); Dickel, J. R.; Romero, P. S. [Department of Physics and Astronomy, University of New Mexico, 1919 Lomas Boulevard NE, Albuquerque, NM 87131 (United States); Edwards, Z. I.; Perry, M.; Williams, R. M. [Department of Earth and Space Sciences, Columbus State University, Coca Cola Space Science Center, 701 Front Avenue, Columbus, GA 31901 (United States)

    2012-11-10

    A Chandra observation of the Large Magellanic Cloud supernova remnant DEM L241 reveals an interior unresolved source which is probably an accretion-powered binary. The optical counterpart is an O5III(f) star making this a high-mass X-ray binary with an orbital period likely to be of the order of tens of days. Emission from the remnant interior is thermal and spectral information is used to derive density and mass of the hot material. Elongation of the remnant is unusual and possible causes of this are discussed. The precursor star probably had mass >25 M {sub Sun}.

  16. Was kommt nach dem Handel? Umnutzung von Einzelhandelsflächen und deren Beitrag zur Stadtentwicklung

    OpenAIRE

    Sperle, Tilman

    2012-01-01

    In der Stadt europäischen Typs sind Stadt und Handel eng miteinander verwoben. Die Bedeutung des Handels geht weit über dessen originäre Versorgungsfunktion hinaus. Für die städtischen Zentren und Nebenzentren übernimmt er sowohl gestaltende als auch soziale Funktionen und trägt mit seiner belebenden Wirkung maßgeblich zum urbanen Leben bei. Mit dem tief greifenden Strukturwandel im Einzelhandel verändert sich diese Beziehung zwischen Stadt und Handel dramatisch, Trading-down-Prozesse geh...

  17. Social Entrepreneurship im etablierten Wohlfahrtsstaat : Aktuelle empirische Befunde zu neuen und alten Akteuren auf dem Wohlfahrtsmarkt

    OpenAIRE

    Heinze, Rolf G.; Schönauer, Anna-Lena; Schneiders, Katrin; Grohs, Stephan; Ruddat, Claudia

    2013-01-01

    Im internationalen Vergleich hat sich die wissenschaftliche Diskussion um die gesellschaftliche Relevanz des Phänomens „Social Entrepreneurship“ (SE) in Deutschland relativ spät entwickelt. In Asien wurde die Debatte insbesondere durch die von Muhammad Yunus 1983 gegründete Grameen Bank angestoßen und spätestens seit der Auszeichnung Yunus‘ mit dem Friedensnobelpreis wird SE in vielen Nationen zunehmend als Chance wahrgenommen, soziale Missstände effektiv und nachhaltig zu bekämpfen....

  18. Rechargable Lithium-Air Batteries: Investigation of Redox Mediators Using DEMS

    DEFF Research Database (Denmark)

    Christensen, Mathias Kjærgård; Storm, Mie Møller; Norby, Poul

    2016-01-01

    material or electrolyte is being decomposed. This is also seen with Thermally reduced Graphene Oxide (TrGO). The graphene based cathode is interesting as it exhibits a high surface area which in turn increases capacity. Using the additive LiI, functioning as a redox mediator, the discharge curve remains...... is observed without the redox mediator [2]. This results in higher energy densities and ideally higher cyclability due to the lower over-potentials. Using DEMS we have investigated the gas evolved in the process to determine the electron to oxygen ratio using both cathode materials mentioned. As has been...

  19. O efeito de um programa psicomotor para idosos com demência

    OpenAIRE

    Henriques, Bebiana Maria Pais

    2013-01-01

    Trabalho de Projeto apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Fisioterapia, ramo de Fisioterapia da Senescência Resultados de vários estudos fornecem informações relevantes à literatura do envelhecimento, sugerindo que há uma relação positiva entre a intervenção motora e cognitiva em idosos com demência (p. ex. Ferrer et al., 2003). Segundo a Alzheimer Europe (2012) existem 7,3 milhões de europeus dementes (153.000 port...

  1. Der Zusammenhang von Partnermarktopportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen : Eine Analyse mit den Daten des Partnermarktsurvey

    OpenAIRE

    Häring, Armando

    2014-01-01

    "Der Beitrag analysiert den Zusammenhang zwischen Partnermarktoportunitäten aus dem Freundeskreis und der Stabilität von Paarbeziehungen. Unter Verwendung des theoretischen Konzepts der Theorie der Interaktionsgelegenheiten sowie von Annahmen der Austauschtheorie und der Familienökonomie, werden mögliche Zusammenhänge zwischen gemeinsamen Freundeskreisen mit dem Partner, Partnermarktgelegenheiten aus dem Freundeskreis (sex ratio) und der Stabilität von Paarbeziehungen diskutiert. Der Beitrag ...

  2. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    M Scazufca

    2002-12-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  3. Investigações epidemiológicas sobre demência nos países em desenvolvimento

    Directory of Open Access Journals (Sweden)

    Scazufca M

    2002-01-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.

  4. Comparison of elevation derived from insar data with dem from topography map in Son Dong, Bac Giang, Viet Nam

    Science.gov (United States)

    Nguyen, Duy

    2012-07-01

    Digital Elevation Models (DEMs) are used in many applications in the context of earth sciences such as in topographic mapping, environmental modeling, rainfall-runoff studies, landslide hazard zonation, seismic source modeling, etc. During the last years multitude of scientific applications of Synthetic Aperture Radar Interferometry (InSAR) techniques have evolved. It has been shown that InSAR is an established technique of generating high quality DEMs from space borne and airborne data, and that it has advantages over other methods for the generation of large area DEM. However, the processing of InSAR data is still a challenging task. This paper describes InSAR operational steps and processing chain for DEM generation from Single Look Complex (SLC) SAR data and compare a satellite SAR estimate of surface elevation with a digital elevation model (DEM) from Topography map. The operational steps are performed in three major stages: Data Search, Data Processing, and product Validation. The Data processing stage is further divided into five steps of Data Pre-Processing, Co-registration, Interferogram generation, Phase unwrapping, and Geocoding. The Data processing steps have been tested with ERS 1/2 data using Delft Object-oriented Interferometric (DORIS) InSAR processing software. Results of the outcome of the application of the described processing steps to real data set are presented.

  5. DEM study of granular flow around blocks attached to inclined walls

    Directory of Open Access Journals (Sweden)

    Samsu Joel

    2017-01-01

    Full Text Available Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i flow analysis in terms of flow patterns and particle velocities, (ii force distributions within the model geometry, and (iii wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  6. Historic Low Wall Detection via Topographic Parameter Images Derived from Fine-Resolution DEM

    Directory of Open Access Journals (Sweden)

    Hone-Jay Chu

    2017-11-01

    Full Text Available Coral walls protect vegetation gardens from strong winds that sweep across Xiji Island, Taiwan Strait for half the year. Topographic parameters based on light detection and ranging (LiDAR-based high-resolution digital elevation model (DEM provide obvious correspondence with the expected form of landscape features. The information on slope, curvature, and openness can help identify the location of landscape features. This study applied the automatic landscape line detection to extract historic vegetable garden wall lines from a LiDAR-derived DEM. The three rapid processes used in this study included the derivation of topographic parameters, line extraction, and aggregation. The rules were extracted from a decision tree to check the line detection from multiple topographic parameters. Results show that wall line detection with multiple topographic parameter images is an alternative means of obtaining essential historic wall feature information. Multiple topographic parameters are highly related to low wall feature identification. Furthermore, the accuracy of wall feature detection is 74% compared with manual interpretation. Thus, this study provides rapid wall detection systems with multiple topographic parameters for further historic landscape management.

  7. DEM study of granular flow around blocks attached to inclined walls

    Science.gov (United States)

    Samsu, Joel; Zhou, Zongyan; Pinson, David; Chew, Sheng

    2017-06-01

    Damage due to intense particle-wall contact in industrial applications can cause severe problems in industries such as mineral processing, mining and metallurgy. Studying the flow dynamics and forces on containing walls can provide valuable feedback for equipment design and optimising operations to prolong the equipment lifetime. Therefore, solids flow-wall interaction phenomena, i.e. induced wall stress and particle flow patterns should be well understood. In this work, discrete element method (DEM) is used to study steady state granular flow in a gravity-fed hopper like geometry with blocks attached to an inclined wall. The effects of different geometries, e.g. different wall angles and spacing between blocks are studied by means of a 3D DEM slot model with periodic boundary conditions. The findings of this work include (i) flow analysis in terms of flow patterns and particle velocities, (ii) force distributions within the model geometry, and (iii) wall stress vs. model height diagrams. The model enables easy transfer of the key findings to other industrial applications handling granular materials.

  8. CFD-DEM Simulation of Minimum Fluidisation Velocity in Two Phase Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, CFD-DEM (computational fluid dynamics - discrete element method has been used to model the 2 phase flow composed of solid particle and gas in the fluidised bed. This technique uses the Eulerian and the Langrangian methods to solve fluid and particles respectively. Each particle is treated as a discrete entity whose motion is governed by Newton's laws of motion. The particle-particle and particle-wall interaction is modelled using the classical contact mechanics. The particles motion is coupled with the volume averaged equations of the fluid dynamics using drag law. In fluidised bed, particles start experiencing drag once the fluid is passing through. The solid particles response to it once drag experienced is just equal to the weight of the particles. At this moment pressure drop across the bed is just equal to the weight of particles divide by the cross-section area. This is the first regime of fluidization, also referred as ‘the regime of minimum fluidization’. In this study, phenomenon of minimum fluidization is studied using CFD-DEM simulation with 4 different sizes of particles 0.15 mm, 0.3 mm, 0.6 mm, and 1.2 mm diameters. The results are presented in the form of pressure drop across the bed with the fluid superficial velocity. The achieved results are found in good agreement with the experimental and theoretical data available in literature.

  9. CFD-DEM Simulation of Propagation of Sound Waves in Fluid Particles Fluidised Medium

    Directory of Open Access Journals (Sweden)

    H Khawaja

    2016-09-01

    Full Text Available In this work, speed of sound in 2 phase mixture has been explored using CFD-DEM (Computational Fluid Dynamcis - Discrete Element Modelling. In this method volume averaged Navier Stokes, continuity and energy equations are solved for fluid. Particles are simulated as individual entities; their behaviour is captured by Newton's laws of motion and classical contact mechanics. Particle-fluid interaction is captured using drag laws given in literature. The speed of sound in a medium depends on physical properties. It has been found experimentally that speed of sound drops significantly in 2 phase mixture of fluidised particles because of its increased density relative to gas while maintaining its compressibility. Due to the high rate of heat transfer within 2 phase medium as given in Roy et al. (1990, it has been assumed that the fluidised gas-particle medium is isothermal. The similar phenomenon has been tried to be captured using CFD-DEM numerical simulation. The disturbance is introduced and fundamental frequency in the medium is noted to measure the speed of sound for e.g. organ pipe. It has been found that speed of sound is in agreement with the relationship given in Roy et al. (1990. Their assumption that the system is isothermal also appears to be valid.

  10. Toward the modeling of combustion reactions through discrete element method (DEM) simulations

    Science.gov (United States)

    Reis, Martina Costa; Alobaid, Falah; Wang, Yongqi

    2018-03-01

    In this work, the process of combustion of coal particles under turbulent regime in a high-temperature reaction chamber is modeled through 3D discrete element method (DEM) simulations. By assuming the occurrence of interfacial transport phenomena between the gas and solid phases, one investigates the influence of the physicochemical properties of particles on the rates of heterogeneous chemical reactions, as well as the influence of eddies present in the gas phase on the mass transport of reactants toward the coal particles surface. Moreover, by considering a simplistic chemical mechanism for the combustion process, thermochemical and kinetic parameters obtained from the simulations are employed to discuss some phenomenological aspects of the combustion process. In particular, the observed changes in the mass and volume of coal particles during the gasification and combustion steps are discussed by emphasizing the changes in the chemical structure of the coal. In addition to illustrate how DEM simulations can be used in the modeling of consecutive and parallel chemical reactions, this work also shows how heterogeneous and homogeneous chemical reactions become a source of mass and energy for the gas phase.

  11. Magnetisches Tracking für die Navigation mit dem da Vinci® Surgical System

    Science.gov (United States)

    Nickel, Felix; Wegner, Ingmar; Kenngott, Hannes; Neuhaus, Jochen; Müller-Stich, Beat P.; Meinzer, Hans-Peter; Gutt, Carsten N.

    In dieser Studie wurde untersucht ob in einem typischen OP-Aufbau mit dem da Vinci® Telemanipulator elektromagnetisches Tracking für die Realisation eines Navigationssystems eingesetzt werden kann. Hierfür wurde in einem realen OP-Aufbau untersucht, wie stark metallische und ferromagnetisch wirksame Objekte wie Operationstisch und Telemanipulator das elektromagnetische Feld des Trackingsystems beeinflussen. Die Ergebnisse zeigen, dass der Telemanipulator nur unwesentlich die Störung des Magnetfeldes durch den OP-Tisch verstärkt. Insbesondere die Bewegung der Instrumente im Trackingvolumen verursachte keine zusätzliche relevante Störung des Magnetfeldes. Bei Begrenzung des Trackingvolumens auf eine Länge von 190 mm, Höhe von 200mm und Breite von 400 mm war der maximale Fehler in diesem Bereich an allen Messpunkten kleiner 10 mm. Der Einsatz von elektromagnetischem Tracking für die Navigation mit dem da Vinci® Surgical System ist somit in einem begrenzten Arbeitsvolumen mit hinreichender Genauigkeit möglich.

  12. 1963 Vajont rock slide: a comparison between 3D DEM and 3D FEM

    Science.gov (United States)

    Crosta, Giovanni; Utili, Stefano; Castellanza, Riccardo; Agliardi, Federico; Bistacchi, Andrea; Weng Boon, Chia

    2013-04-01

    Data on the exact location of the failure surface of the landslide have been used as the starting point for the modelling of the landslide. 3 dimensional numerical analyses were run employing both the discrete element method (DEM) and a Finite Element Method (FEM) code. In this work the focus is on the prediction of the movement of the landlside during its initial phase of detachment from Mount Toc. The results obtained by the two methods are compared and conjectures on the observed discrepancies of the predictions between the two methods are formulated. In the DEM simulations the internal interaction of the sliding blocks and the expansion of the debris is obtained as a result of the kinematic interaction among the rock blocks resulting from the jointing of the rock mass involved in the slide. In the FEM analyses, the c-phi reduction technique was employed along the predefine failure surface until the onset of the landslide occurred. In particular, two major blocks of the landslide were identified and the stress, strain and displacement fields at the interface between the two blocks were analysed in detail.

  13. DEM modeling of failure mechanisms induced by excavations on the Moon

    Science.gov (United States)

    jiang, mingjing; shen, zhifu; Utili, Stefano

    2013-04-01

    2D Discrete Element Method (DEM) analyses were performed for excavations supported by retaining walls in lunar environment. The lunar terrain is made of a layer of sand (regolith) which differs from terrestrial sands for two main features: the presence of adhesive attractive forces due to van der Waals interactions and grains being very irregular in shape leading to high interlocking. A simplified contact model based on linear elasticity and perfect plasticity was employed. The contact model includes a moment - relative rotation law to account for high interlocking among grains and a normal adhesion law to account for the van der Waals interactions. Analyses of the excavations were run under both lunar and terrestrial environments. Under lunar environment, gravity is approximately one sixth than the value on Earth and adhesion forces between grains of lunar regolith due to van der Waals interactions are not negligible. From the DEM simulations it emerged that van der Waals interactions may significantly increase the bending moment and deflection of the retaining wall, and the ground displacements. Hence this study indicates that an unsafe estimate of the wall response to an excavation on the Moon would be obtained from physical experiments performed in a terrestrial environment, i.e., considering the effect of gravity but neglecting the van der Waals interactions.

  14. An Automated Processing Algorithm for Flat Areas Resulting from DEM Filling and Interpolation

    Directory of Open Access Journals (Sweden)

    Xingwei Liu

    2017-11-01

    Full Text Available Correction of digital elevation models (DEMs for flat areas is a critical process for hydrological analyses and modeling, such as the determination of flow directions and accumulations, and the delineation of drainage networks and sub-basins. In this study, a new algorithm is proposed for flat correction/removal. It uses the puddle delineation (PD program to identify depressions (including their centers and overflow/spilling thresholds, compute topographic characteristics, and further fill the depressions. Three different levels of elevation increments are used for flat correction. The first and second level of increments create flows toward the thresholds and centers of the filled depressions or flats, while the third level of small random increments is introduced to cope with multiple threshold conditions. A set of artificial surfaces and two real-world landscapes were selected to test the new algorithm. The results showed that the proposed method was not limited by the shapes, the number of thresholds, and the surrounding topographic conditions of flat areas. Compared with the traditional methods, the new algorithm simplified the flat correction procedure and reduced the final elevation increments by 5.71–33.33%. This can be used to effectively remove/correct topographic flats and create flat-free DEMs.

  15. Application of the PROMETHEE technique to determine depression outlet location and flow direction in DEM

    Science.gov (United States)

    Chou, Tien-Yin; Lin, Wen-Tzu; Lin, Chao-Yuan; Chou, Wen-Chieh; Huang, Pi-Hui

    2004-02-01

    With the fast growing progress of computer technologies, spatial information on watersheds such as flow direction, watershed boundaries and the drainage network can be automatically calculated or extracted from a digital elevation model (DEM). The stubborn problem that depressions exist in DEMs has been frequently encountered while extracting the spatial information of terrain. Several filling-up methods have been proposed for solving depressions. However, their suitability for large-scale flat areas is inadequate. This study proposes a depression watershed method coupled with the Preference Ranking Organization METHod for Enrichment Evaluations (PROMETHEEs) theory to determine the optimal outlet and calculate the flow direction in depressions. Three processing procedures are used to derive the depressionless flow direction: (1) calculating the incipient flow direction; (2) establishing the depression watershed by tracing the upstream drainage area and determining the depression outlet using PROMETHEE theory; (3) calculating the depressionless flow direction. The developed method was used to delineate the Shihmen Reservoir watershed located in Northern Taiwan. The results show that the depression watershed method can effectively solve the shortcomings such as depression outlet differentiating and looped flow direction between depressions. The suitability of the proposed approach was verified.

  16. Landslide Detection in the Carlyon Beach, WA Peninsula: Analysis Of High Resolution DEMs

    Science.gov (United States)

    Fayne, J.; Tran, C.; Mora, O. E.

    2017-12-01

    Landslides are geological events caused by slope instability and degradation, leading to the sliding of large masses of rock and soil down a mountain or hillside. These events are influenced by topography, geology, weather and human activity, and can cause extensive damage to the environment and infrastructure, such as the destruction of transportation networks, homes, and businesses. It is therefore imperative to detect early-warning signs of landslide hazards as a means of mitigation and disaster prevention. Traditional landslide surveillance consists of field mapping, but the process is expensive and time consuming. This study uses Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and k-means clustering and Gaussian Mixture Model (GMM) to analyze surface roughness and extract spatial features and patterns of landslides and landslide-prone areas. The methodology based on several feature extractors employs an unsupervised classifier on the Carlyon Beach Peninsula in the state of Washington to attempt to identify slide potential terrain. When compared with the independently compiled landslide inventory map, the proposed algorithm correctly classifies up to 87% of the terrain. These results suggest that the proposed methods and LiDAR-derived DEMs can provide important surface information and be used as efficient tools for digital terrain analysis to create accurate landslide maps.

  17. Experimental study and DEM simulation of granular flow through a new sphere discharge valve

    International Nuclear Information System (INIS)

    Zhang He; Li Tianjin; Huang Zhiyong; Gao Zhi; Qi Weiwei; Bo Hanliang

    2015-01-01

    Experiments and DEM simulation have been conducted to investigate the granular flow through a new type of sphere discharge valve. The new sphere discharge valve was based on the principle of angle of repose. The glass sphere was used in the granular discharge experiments. Experimental results showed that the relation between the averaging sphere discharge mass flow rate and the stroke of the sphere discharge valve were consisted of three zones, i.e. the idle stroke zone, linearly zone and orifice restriction zone. The Beverloo's law was suitable for the granular flow through multi-orifices in the orifice restriction zone. The variation of averaging sphere discharge mass flow rate with the stroke of the sphere discharge valve was described by Beverloo's law with the modification based on the stroke of the sphere discharge valve. DEM simulation results showed that the drained angle of repose during granular flow in the sphere storage vessel remained 23 degrees with different stroke of the sphere discharge valve. (authors)

  18. Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

    Science.gov (United States)

    Prokešová, Roberta; Kardoš, Miroslav; Tábořík, Petr; Medveďová, Alžbeta; Stacke, Václav; Chudý, František

    2014-11-01

    Large earthflow-type landslides are destructive mass movement phenomena with highly unpredictable behaviour. Knowledge of earthflow kinematics is essential for understanding the mechanisms that control its movements. The present paper characterises the kinematic behaviour of a large earthflow near the village of Ľubietová in Central Slovakia over a period of 35 years following its most recent reactivation in 1977. For this purpose, multi-temporal spatial data acquired by point-based in-situ monitoring and optical remote sensing methods have been used. Quantitative data analyses including strain modelling and DEM differencing techniques have enabled us to: (i) calculate the annual landslide movement rates; (ii) detect the trend of surface displacements; (iii) characterise spatial variability of movement rates; (iv) measure changes in the surface topography on a decadal scale; and (v) define areas with distinct kinematic behaviour. The results also integrate the qualitative characteristics of surface topography, in particular the distribution of surface structures as defined by a high-resolution DEM, and the landslide subsurface structure, as revealed by 2D resistivity imaging. Then, the ground surface kinematics of the landslide is evaluated with respect to the specific conditions encountered in the study area including slope morphology, landslide subsurface structure, and local geological and hydrometeorological conditions. Finally, the broader implications of the presented research are discussed with particular focus on the role that strain-related structures play in landslide kinematic behaviour.

  19. Aerial photography flight quality assessment with GPS/INS and DEM data

    Science.gov (United States)

    Zhao, Haitao; Zhang, Bing; Shang, Jiali; Liu, Jiangui; Li, Dong; Chen, Yanyan; Zuo, Zhengli; Chen, Zhengchao

    2018-01-01

    The flight altitude, ground coverage, photo overlap, and other acquisition specifications of an aerial photography flight mission directly affect the quality and accuracy of the subsequent mapping tasks. To ensure smooth post-flight data processing and fulfill the pre-defined mapping accuracy, flight quality assessments should be carried out in time. This paper presents a novel and rigorous approach for flight quality evaluation of frame cameras with GPS/INS data and DEM, using geometric calculation rather than image analysis as in the conventional methods. This new approach is based mainly on the collinearity equations, in which the accuracy of a set of flight quality indicators is derived through a rigorous error propagation model and validated with scenario data. Theoretical analysis and practical flight test of an aerial photography mission using an UltraCamXp camera showed that the calculated photo overlap is accurate enough for flight quality assessment of 5 cm ground sample distance image, using the SRTMGL3 DEM and the POSAV510 GPS/INS data. An even better overlap accuracy could be achieved for coarser-resolution aerial photography. With this new approach, the flight quality evaluation can be conducted on site right after landing, providing accurate and timely information for decision making.

  20. Inundation Analysis of Reservoir Flood Based on Computer Aided Design (CAD and Digital Elevation Model (DEM

    Directory of Open Access Journals (Sweden)

    Jiqing Li

    2018-04-01

    Full Text Available GIS (Geographic Information System can be used to combine multiple hydrologic data and geographic data for FIA (Flood Impact Assessment. For a developing country like China, a lot of geographic data is in the CAD (Computer Aided Design format. The commonly used method for converting CAD into DEM may result in data loss. This paper introduces a solution for the conversion between CAD data and DEM data. The method has been applied to the FIA based on the topographic map of CAD in Hanjiang River. When compared with the other method, the new method solves the data loss problem. Besides, the paper use GIS to simulate the inundation range, area, and the depth distribution of flood backwater. Based on the analysis, the author concludes: (1 the differences of the inundation areas between the flood of HQ100 and the flood of HQ50 are small. (2 The inundation depth shows a decreasing trend along the upstream of the river. (3 The inundation area less than 4 m in flood of HQ50 is larger than that in flood of HQ100, the result is opposite when the inundation depth is greater than 4 m. (4 The flood loss is 392.32 million RMB for flood of HQ50 and 610.02 million RMB for flood of HQ100. The method can be applied to FIA.

  1. Parallel Resolved Open Source CFD-DEM: Method, Validation and Application

    Directory of Open Access Journals (Sweden)

    A. Hager

    2014-03-01

    Full Text Available In the following paper the authors present a fully parallelized Open Source method for calculating the interaction of immersed bodies and surrounding fluid. A combination of computational fluid dynamics (CFD and a discrete element method (DEM accounts for the physics of both the fluid and the particles. The objects considered are relatively big compared to the cells of the fluid mesh, i.e. they cover several cells each. Thus this fictitious domain method (FDM is called resolved. The implementation is realized within the Open Source framework CFDEMcOupling (www.cfdem.com, which provides an interface between OpenFOAM® based CFD-solvers and the DEM software LIGGGHTS (www.liggghts.com. While both LIGGGHTS and OpenFOAM® were already parallelized, only a recent improvement of the algorithm permits the fully parallel computation of resolved problems. Alongside with a detailed description of the method, its implementation and recent improvements, a number of application and validation examples is presented in the scope of this paper.

  2. CFD-DEM simulation of a conceptual gas-cooled fluidized bed nuclear reactor

    International Nuclear Information System (INIS)

    Almeida, Lucilla C.; Su, Jian

    2015-01-01

    Several conceptual designs of the fluidized-bed nuclear reactor have been proposed due to its many advantages over conventional nuclear reactors such as PWRs and BWRs. Amongst their characteristics, the enhanced heat transfer and mixing enables a more uniform temperature distribution, reducing the risk of hot-spot and excessive fuel temperature, in addition to resulting in a higher burnup of the fuel. Furthermore, the relationship between the bed height and reactor neutronics turns the coolant flow rate control into a power production mechanism. Moreover, the possibility of removing the fuel by gravity from the movable core in case of a loss-of-cooling accident increases its safety. High-accuracy modeling of particles and coolant flow in fluidized bed reactors is needed to evaluate reliably the thermal-hydraulic efficiency and safety margin. The two-way coupling between solid and fluid can account for high-fidelity solid-solid interaction and reasonable accuracy in fluid calculation and fluid-solid interaction. In the CFD-DEM model, the particles are modeled as a discrete phase, following the DEM approach, whereas the fluid flow is treated as a continuous phase, described by the averaged Navier-Stokes equations on a computational cell scale. In this work, the coupling methodology between Fluent and Rocky is described. The numerical approach was applied to the simulation of a bubbling fluidized bed and the results were compared to experimental data and showed good agreement. (author)

  3. Constructing Palaeo-DEMs in landscape evolution: example of the Geren catchment, Turkey

    Science.gov (United States)

    van Gorp, Wouter; Schoorl, Jeroen M.; Veldkamp, Tom; Maddy, Darrel; Demir, Tuncer; Aytac, Serdar

    2017-04-01

    How to reconstruct the past landscape and how does this influence your modelling results? This is an important paradigma in the soilscape and landscape evolution modelling community. Here an example of Turkey will be presented where a 300 ka LEM simulation requested to the thoroughly think about the initial landscape as an important input. What information can be used to know the morphology of a landscape 300 ka ago? The Geren catchment, a tributary of the upstream Gediz river near Kula, Turkey, has been influenced by base level changes during the Late Pleistocene and Holocene. Different lavaflows have blocked the Gediz and Geren river several times over in the timespan of the last 300 ka -200 Ka and in the recent Holocene. The heavily dissected Geren catchment shows a landscape evolution which is more complex than just a reaction on these base level changes. The steps and inputs of the palaeo DEM reconstruction will be presented and the modelling results will be presented. Keywords: Digital Elevation Model, Palaeo DEMs, Numerical modelling

  4. Comparison Between Topographic Expression of RADARSAT and DEM in Simpang Pulai to Pos Selim, Malaysia

    Directory of Open Access Journals (Sweden)

    M.F.Ramli

    2010-01-01

    Full Text Available Radar and digital elevation model had been utilised in many structural studies. The main objective of this study is to compare the RADARSAT and digital elevation model for lineament interpretation which probably represent the main joints or faults along the Simpang Pulai to Pos Selim highway, Malaysia. These joints and faults may influence the instability along the highway. Manual comparison in terms of topographical aspect was undertaken between RADARSAT with 25 m spatial resolution and digital elevation model derived from 20 m contour interval of the topographical map. The previously interpreted lineaments of more than 2 km in the study area was draped over the RADARSAT and digital elevation model to compared whether the lineament concurred with the topographical representation. The interpreted lineaments were derived from Landsat TM of 1990 and 2002, where the DEM had been utilised in the negative lineament determination. It is concluded that the application RADARSAT is not very useful in terms of topographical expression in the structural geological interpretation for the study area compared to DEM derived from contour data. Further work is suggested before any conclusion can be confidently derived.

  5. An algorithm for generation of DEMs from contour lines considering geomorphic features

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Rui

    2016-04-01

    Full Text Available Geomorphic information is omitted from many existing methods of generating gridded digital elevation models (DEMs from contour lines, resulting in significant errors during interpolation. Here, we present an advanced schema for improvement of the comprehensive regionalized method of linear interpolation. This approach uses a moving fitting method for an interpolated point and selects elevation points that are representative of geomorphic features as a whole to improve interpolation quality. A total of 16 points are selected, according to certain criteria, in eight directions surrounding the interpolated point; thus, there are two points in each direction, which is sufficient to provide an accurate representation of the geomorphic features of the DEM. Our method introduces virtual control points to prevent sudden changes in the interpolation results, which helps to overcome problems related to the distortion of the local geospatial distribution in areas where feature geomorphic information is inadequate. We construct the spline interpolation function using intersection points and virtual control points, all of which are applied to compute the point elevation. Moreover, we index all elevation values and spatial points of linear features using the R-tree method to ensure that points related to an interpolated position can be retrieved as quickly as possible. Finally, we test our method using a coal mine elevation dataset. The results confirm that our proposed method can generate DEMs smoothly and, in particular, avoid problems related to local distortion.    Resumen La información geomórfica se omite en muchos de los métodos de generación de Modelos Digitales de Elevación (DEM, en inglés que se elaboran a partir de líneas de contorno, lo que resulta en errores significativos durante la interpolación. En este trabajo se presenta un esquema avanzado para el mejoramiento del método comprensivo regionalizado de interpolación lineal. Esta

  6. Satisfação sexual na demência Sexual satisfaction in dementia

    Directory of Open Access Journals (Sweden)

    Marcela Moreira Lima Nogueira

    2013-01-01

    Full Text Available CONTEXTO: A demência pode resultar em comprometimento da intimidade e sexualidade de casais idosos. OBJETIVOS: Avaliar alterações na atividade sexual, bem como os fatores de satisfação e/ou insatisfação sexual de casais nos quais um dos parceiros possua demência. MÉTODO: Busca nas bases de dados ISI, PubMed/Medline e SciELO de artigos sobre sexualidade na demência, entre janeiro de 1990 e março de 2012, utilizando as palavras-chave: "demência", "satisfação sexual", "intimidade" e "sexualidade". RESULTADOS: Foram encontrados 12 artigos. A sobrecarga de cuidados e a alteração de papéis na relação conjugal foram consideradas as principais causas para o declínio da atividade sexual. A disfunção erétil em pacientes e cônjuges, a capacidade decisória para o consentimento da relação sexual por parte do paciente demenciado e os problemas referentes à idade e à saúde (física e emocional do cônjuge e/ou paciente foram os fatores associados à insatisfação sexual. CONCLUSÃO: A intimidade e a atividade sexual dos casais em que um dos parceiros é portador de demência são influenciadas negativamente pela relação de cuidados decorrente da doença e pela sobrecarga dos cônjuges. Por outro lado, a atividade sexual pode ser positivamente substituída por demonstrações de carinho e empatia entre os cônjuges.BACKGROUND: Dementia may result on impairment in intimacy and sexuality of elderly couples. OBJECTIVES: Evaluate changes in sexual activity, as well as the factors which cause sexual satisfaction and/or dissatisfaction in couples in which one of the partners has dementia. METHOD: A search at ISI, PubMed/Medline and SciELO was made for articles about sexuality in dementia, from January 1990 to March 2012, using the keywords: "dementia", "sexual satisfaction", "intimacy" and "sexuality". RESULTS: Twelve articles were selected. The burden of care and the change of roles in couples' relationship were the main reasons for

  7. Optimizing landslide susceptibility zonation: Effects of DEM spatial resolution and slope unit delineation on logistic regression models

    Science.gov (United States)

    Schlögel, R.; Marchesini, I.; Alvioli, M.; Reichenbach, P.; Rossi, M.; Malet, J.-P.

    2018-01-01

    We perform landslide susceptibility zonation with slope units using three digital elevation models (DEMs) of varying spatial resolution of the Ubaye Valley (South French Alps). In so doing, we applied a recently developed algorithm automating slope unit delineation, given a number of parameters, in order to optimize simultaneously the partitioning of the terrain and the performance of a logistic regression susceptibility model. The method allowed us to obtain optimal slope units for each available DEM spatial resolution. For each resolution, we studied the susceptibility model performance by analyzing in detail the relevance of the conditioning variables. The analysis is based on landslide morphology data, considering either the whole landslide or only the source area outline as inputs. The procedure allowed us to select the most useful information, in terms of DEM spatial resolution, thematic variables and landslide inventory, in order to obtain the most reliable slope unit-based landslide susceptibility assessment.

  8. BOREAS HYD-8 DEM Data Over the NSA-MSA and SSA-MSA in the UTM Projection

    Science.gov (United States)

    Wang, Xue-Wen; Hall, Forrest G. (Editor); Knapp, David E. (Editor); Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    The BOREAS HYD-8 team focused on describing the scaling behavior of water and carbon flux processes at local and regional scales. These DEMs were produced from digitized contours at a cell resolution of 100 meters. Vector contours of the area were used as input to a software package that interpolates between contours to create a DEM representing the terrain surface. The vector contours had a contour interval of 25 feet. The data cover the BOREAS MSAs of the SSA and NSA and are given in a UTM map projection. Most of the elevation data from which the DEM was produced were collected in the 1970s or 1980s. The data are stored in binary, image format files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  9. The EVE plus RHESSI DEM for Solar Flares, and Implications for Residual Non-Thermal X-Ray Emission

    Science.gov (United States)

    McTiernan, James; Caspi, Amir; Warren, Harry

    2016-05-01

    Solar flare spectra are typically dominated by thermal emission in the soft X-ray energy range. The low energy extent of non-thermal emission can only be loosely quantified using currently available X-ray data. To address this issue, we combine observations from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) with X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI) to calculate the Differential Emission Measure (DEM) for solar flares. This improvement over the isothermal approximation helps to resolve the ambiguity in the range where the thermal and non-thermal components may have similar photon fluxes. This "crossover" range can extend up to 30 keV.Previous work (Caspi et.al. 2014ApJ...788L..31C) concentrated on obtaining DEM models that fit both instruments' observations well. For this current project we are interested in breaks and cutoffs in the "residual" non-thermal spectrum; i.e., the RHESSI spectrum that is left over after the DEM has accounted for the bulk of the soft X-ray emission. As in our earlier work, thermal emission is modeled using a DEM that is parametrized as multiple gaussians in temperature. Non-thermal emission is modeled as a photon spectrum obtained using a thin-target emission model ('thin2' from the SolarSoft Xray IDL package). Spectra for both instruments are fit simultaneously in a self-consistent manner.For this study, we have examined the DEM and non-thermal resuidual emission for a sample of relatively large (GOES M class and above) solar flares observed from 2011 to 2014. The results for the DEM and non-thermal parameters found using the combined EVE-RHESSI data are compared with those found using only RHESSI data.

  10. Influence of different DEMs on the quality of the InSAR results: case study over Bankya and Mirovo areas

    Science.gov (United States)

    Nikolov, Hristo; Atanasova, Mila

    2017-10-01

    One of the key input parameters in obtaining end products from SAR data is the DEM used during their processing. This holds true especially when persistent scatterers InSAR method should be applied for example to study slow moving landslides or subsidence. Since nowadays most of the raw SAR data are of space borne origin for their correct processing to high precision products for relatively small areas with centimeter accuracy a DEM taking into account the particularities of the local topography is needed. Most of the DEMs used by the SAR processing software such as SRTM or ASTER are obtained by the same type of instrument and present some disagreements with height information acquired by leveling measurements or other geodetic means. This was the motivation for initiating this research - to prove the need of creating and using local DEM in SAR data processing at small scale and to check what the magnitude of the discrepancy between final InSAR products is in both cases where SRTM/ASTER and local DEM has been used. In addition investigated were two scenarios for SAR data processing - one with small baseline between image pairs and one having large baseline image pairs - in order to find out in which case local DEM has bigger impact. In course of this study two reference areas were considered - Bankya village near Sofia (SW region of Bulgaria) and Mirovo salt extraction site (NE region of Bulgaria). The reason those areas were selected lies in the high number of landslides registered and monitored by the competent authorities in the mentioned locations. The significance of the results obtained is witnessed by the fact that both sites we used have been included as reference sites for Bulgaria in the PanGeo EU funded project dealing with delivering information regarding ground instability geohazard as areas prone to subsidence of natural and manmade origin. In the said project largest part of the information has been extracted from Envisat SAR data, but now this

  11. MARE2DEM: a 2-D inversion code for controlled-source electromagnetic and magnetotelluric data

    Science.gov (United States)

    Key, Kerry

    2016-10-01

    This work presents MARE2DEM, a freely available code for 2-D anisotropic inversion of magnetotelluric (MT) data and frequency-domain controlled-source electromagnetic (CSEM) data from onshore and offshore surveys. MARE2DEM parametrizes the inverse model using a grid of arbitrarily shaped polygons, where unstructured triangular or quadrilateral grids are typically used due to their ease of construction. Unstructured grids provide significantly more geometric flexibility and parameter efficiency than the structured rectangular grids commonly used by most other inversion codes. Transmitter and receiver components located on topographic slopes can be tilted parallel to the boundary so that the simulated electromagnetic fields accurately reproduce the real survey geometry. The forward solution is implemented with a goal-oriented adaptive finite-element method that automatically generates and refines unstructured triangular element grids that conform to the inversion parameter grid, ensuring accurate responses as the model conductivity changes. This dual-grid approach is significantly more efficient than the conventional use of a single grid for both the forward and inverse meshes since the more detailed finite-element meshes required for accurate responses do not increase the memory requirements of the inverse problem. Forward solutions are computed in parallel with a highly efficient scaling by partitioning the data into smaller independent modeling tasks consisting of subsets of the input frequencies, transmitters and receivers. Non-linear inversion is carried out with a new Occam inversion approach that requires fewer forward calls. Dense matrix operations are optimized for memory and parallel scalability using the ScaLAPACK parallel library. Free parameters can be bounded using a new non-linear transformation that leaves the transformed parameters nearly the same as the original parameters within the bounds, thereby reducing non-linear smoothing effects. Data

  12. Illustrations to “Gespräche in dem Reiche derer Todten zwischen dem vortreflichen Moscowitischen Czaar Petro Magno und dem grossen Tyrannen Ivan Basilowiz II” (Peter the Great and Ivan the Terrible by David Fassmann (1725

    Directory of Open Access Journals (Sweden)

    Ekaterina A. Skvortcova

    2017-12-01

    Full Text Available The journal created by David Fassmann (1683–1744, Gespräche in dem Reiche derer Todten, edited in Leipzig, was a huge success. Each of the 240 issues presents a dialogue between two historical figures from the afterworld. In the 83rd–86th Entrevuë, the interlocutors are Peter the Great and Ivan the Terrible. The texts of the four conversations were thoroughly examined by Eckhard Matthes (1987. The present paper explores how the illustrations to the 83rd–86th Entrevuë visualize the texts, which is significant as they were an important instrument for disseminating certain notions about Russia. While the illustration to the first dialogue of the suite juxtaposes Peter and Ivan, the illustration to the second one emphasizes the similarities between them. So the image of the “tyrant” and “barbarian” Ivan becomes a reference point with which a reader is urged to compare Peter’s deeds, seeing not only the differences but also the similarities. This greatly contributes to the creation of the multifaceted image of Russia of the early 18th century. The characters of the second illustration—a tiger and an executioner—can be identified as Ivan and Peter only if the reader takes into consideration an epigram to the illustration, the illustration to the previous dialogue, the text of the next Entrevuë, and facts about the execution of the strel’tsy known from other texts and images, about which Fassmann remains silent in the spirit of ars dissimulandi, which was typical for baroque culture. The paper offers an attempt to trace the iconography of the tyrant as a tiger. In the frontispiece to the 85th Entrevuë, a secretary bringing news from the world of the living and a portrait of Catherine I emphasize the connection of the past and the present, i.e., history and policy. Finally, the illustration to the last dialogue of the series returns to the glorification of Peter the Great declared in the first dialogue.

  13. Bestimmung der Mas'se des neutralen Bs-Mesons mit dem ALEPH-Experiment

    CERN Document Server

    Stehle, M

    2001-01-01

    Gegenstand der vorliegenden Arbeit ist die Bestimmung der Masse des neutralen Bs-Mesons. Dazu wurden B~-Mesonen in den beiden Zerfallskanalen B~ -+ J/W P und B~ -+ W(2S) P rekonstruiert, wobei die Subresonanzen in den Zerfallsmoden J /w -+ l+ l-, W(2S) -+ l+ l- und P -+ K+ K- untersucht wurden. Diese beiden Kanale werden auf Grund ihrer eindeutigen Signatur auch als "goldene Kanale" bezeichnet und eignen sich deshalb sehr gut fur eine exklusive Rekonstruktion, wie sie hier angewendet wurde. Grundlage der Analyse waren ca. 4 Millionen hadronische ZO-Zerfalle, die in den Jahren 1991 1995 mit dem ALEPH-Detektor am e+e--Speicherring LEP am CERN aufgezeichnet wurden. Die zwischenzeitliche Reprozessierung der Daten ermoglichte eine prazisere und effizientere Rekonstruktion als das in fruheren Messungen der Fall war. Wegen der niedrigen Verzweigungsverhaltnisse der untersuchten Zerfallsmoden wurden nur wenige einzelne Ereignisse in den Daten erwartet. Die selektierten Kandidaten wurden durch Schnitte in mehreren Ere...

  14. Robust 3D Quantification of Glacial Landforms: A Use of Idealised Drumlins in a Real DEM

    Science.gov (United States)

    Hillier, J. K.; Smith, M. S.

    2012-04-01

    Drumlins' attributes, such as height (h) and volume (V ), may preserve important information about the dynamics of former ice sheets. However, measurement errors are large (e.g., 39.2% of V within ±25% of their real values for the 'cookie cutter') and, in general, poorly understood. To accurately quantify the morphology of glacial landforms, the relief belonging to that landform must be reliably isolated from other components of the landscape (e.g. buildings, hills). A number of techniques have been proposed for this regional-residual separation (RRS). Which is best? Justifications for those applied remain qualitative assertions. A recently developed, novel method using idealised drumlins of known size (hin, V in) in a real digital elevation model (DEM) is used to quantitatively determine the best RRS technique, allowing general guidelines for quantifying glacial landforms to be proposed. 184 drumlins with digitised outlines in western Central Scotland are used as a case study. The NEXTMap surface model (DSM) is the primary dataset employed. A variety of techniques are then investigated for their ability to recover sizes (hr, V r). A metric, ɛ, is used that maximises the number of Hr/Hin values near 1.0 whilst giving equal weight to different drumlin sizes: a metric dominated by the large number of small drumlins is not desirable. For simplicity, the semi-automated 'cookie cutter' technique is used as a baseline for comparison. This removes heights within a drumlin from a DEM, cuts a hole, then estimates its basal surface by interpolating across the space with a fully tensioned bi-cubic spline (-T1). Metrics for h and V are ɛh = 0.885 and ɛV = 0.247. Other tensions do not improve this significantly, with ɛV of 0.245 at best, but using Delauney triangulation reduces ɛV to 0.206. Windowed 'sliding median' filters, which do not require heights within drumlins to be removed, attain a minimum ɛV of 0.470 at a best width of 340 m (-Fm340). Finally, even crudely

  15. Combined DFT and DEMS investigation of the effect of dopants in secondary zinc‐air batteries

    DEFF Research Database (Denmark)

    Lysgaard, Steen; Christensen, Mathias K.; Hansen, Heine A.

    2018-01-01

    Zinc‐air batteries offer the potential of low cost energy storage with high energy density, but at present secondary batteries suffer from poor cyclability. To develop secondary Zn‐air batteries, several challenges need to be overcome: choking of the cathode, catalyzing the oxygen evolution...... and reduction reactions, limiting dendrite formation and the hydrogen evolution reaction (HER). Understanding and alleviating HER at the anode is a challenge, where it is necessary to involve computational as well as experimental research. Here, we combine Differential Electrochemical Mass Spectrometry (DEMS......) and density functional theory calculations to investigate the fundamental role and stability over cycling of possible additives such as In, Bi and Ag. We show that both In and Bi have the desired property for a secondary battery that upon recharging, they will remain in the surface, thereby retaining...

  16. Revealing topographic lineaments through IHS enhancement of DEM data. [Digital Elevation Model

    Science.gov (United States)

    Murdock, Gary

    1990-01-01

    Intensity-hue-saturation (IHS) processing of slope (dip), aspect (dip direction), and elevation to reveal subtle topographic lineaments which may not be obvious in the unprocessed data are used to enhance digital elevation model (DEM) data from northwestern Nevada. This IHS method of lineament identification was applied to a mosiac of 12 square degrees using a Cray Y-MP8/864. Square arrays from 3 x 3 to 31 x 31 points were tested as well as several different slope enhancements. When relatively few points are used to fit the plane, lineaments of various lengths are observed and a mechanism for lineament classification is described. An area encompassing the gold deposits of the Carlin trend and including the Rain in the southeast to Midas in the northwest is investigated in greater detail. The orientation and density of lineaments may be determined on the gently sloping pediment surface as well as in the more steeply sloping ranges.

  17. FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy

    Directory of Open Access Journals (Sweden)

    Ruitao Peng

    2016-01-01

    Full Text Available Due to the complicated contact loading at the tool-chip interface, ceramic tool wear in prestressed machining superalloy is rare difficult to evaluate only by experimental approaches. This study aims to develop a methodology to predict the tool wear evolution by using combined FEM and DEM numerical simulations. Firstly, a finite element model for prestressed cutting is established, subsequently a discrete element model to describe the tool-chip behaviour is established based on the obtained boundary conditions by FEM simulations, finally, simulated results are experimentally validated. The predicted tool wear results show nice agreement with experiments, the simulation indicates that, within a certain range, higher cutting speed effectively results in slighter wear of Sialon ceramic tools, and deeper depth of cut leads to more serious tool wear.

  18. Untersuchung der Produktion charmhaltiger Mesonen in der Photon-Photon-Streuung mit dem OPAL-Experiment

    CERN Document Server

    Patt, Jochen

    2001-01-01

    Die Produktion von Charm-Quarks in der Photon-Photon-Streuung wird ueber den Nachweis charmhaltiger Mesonen untersucht. Die Arbeit basiert auf den Daten, die mit dem OPAL-Detektor am Elektron-Positron-Speicherring LEP am CERN in Genf in den Jahren von 1989 bis 1998 aufgenommen worden sind. Anhand des Charmonium-Zustandes Chi(c2) wird die Resonanzproduktion von Charm-Quarks untersucht und die Zwei-Photon-Breite des Chi(c2)-Mesons wird gemessen. Geladene D*-Mesonen werden zur Untersuchung der offenen Produktion von Charm-Quarks benutzt. Der Anteil des direkten und des einfach-aufgeloesten Produktionsmechanismus, differentielle D*-Wirkungsquerschnitte, der totale Charm-Wirkungsquerschnitt sowie die Charm-Strukturfunktion des Photons werden bestimmt.

  19. Quantenphysik und Kommunikationswissenschaft auf dem Weg zu einer allgemeinen Theorie der Kommunikation

    CERN Document Server

    Hamberger, Erich

    2015-01-01

    Der Quantenphysiker Herbert Pietschmann beschäftigt sich seit Jahrzehnten mit dem Phänomen Kommunikation. Der Kommunikationswissenschaftler Erich Hamberger setzt sich seit langem mit der Frage der Adaptierung erkenntnistheoretischer Einsichten der Quantentheorie für die Geistes- und Biowissenschaften auseinander. 2003 begegnen sich die beiden - und staunen über die „verschränkten Erkenntnisinteressen“. 2006 bestreiten sie eine erste gemeinsame universitäre Lehrveranstaltung. 2011 folgt Das Phänomen Kommunikation transdisziplinär betrachtet. Aus ihrer Zusammenarbeit ist dieses Buch entstanden. Naturwissenschaft arbeitet auf der Grundlage des mechanistischen Denkrahmens. Die bisher einzige Ausnahme ist die Quantenphysik. Weder Leben noch Kommunikation ist mittels des mechanistischen Denkrahmens zu verstehen. Auch der Denkrahmen der Quantenphysik reicht dazu nicht aus. Der Bedarf nach adäquatem Denken im Bereich der Kommunikation kann durch quantenphysikalisches Denken NICHT befriedigt werden, jedoc...

  20. Zur Rekonstruktion einer Typologie jugendlichen Medienhandelns gemäß dem Leitbild der Triangulation

    Directory of Open Access Journals (Sweden)

    Klaus Peter Treumann

    2017-09-01

    Full Text Available Die im Folgenden dargestellten Ergebnisse sind im Rahmen des von der DFG geförderten Forschungsprojekts „Eine Untersuchung zum Mediennutzungsverhalten 12- bis 20-Jähriger und zur Entwicklung von Medienkompetenz im Jugendalter“ entstanden, das gemeinsam von Klaus Peter Treumann, Uwe Sander und Dorothee Meister geleitet wird. Das Forschungsprojekt untersucht das Medienhandeln Jugendlicher sowohl hinsichtlich Neuer als auch alter Medien. Zum einen fragen wir dabei nach den Ausprägungen von Medienkompetenz in verschiedenen Dimensionen und zum anderen konzentrieren wir uns auf die Entwicklung einer empirisch fundierten Typologie jugendlichen Medienhandelns. Methodologisch ist die Untersuchung an dem Leitbild der Triangulation orientiert und kombiniert qualitative und quantitative Zugänge zum Forschungsfeld in Form von Gruppendiskussionen, leitfadengestützten Einzelinterviews und einer Repräsentativerhebung.

  1. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  2. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-01-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes do lobo temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  3. Cerebellar volume in patients with dementia Volume cerebelar em pacientes com demência

    Directory of Open Access Journals (Sweden)

    Leonardo Baldaçara

    2011-06-01

    Mental e do Questionário de Atividades Funcionais. Os sujeitos foram divididos em cinco grupos de acordo com a Escala de Gravidade da Demência. Vinte e seis indivíduos do grupo original que não tinham o diagnóstico de demência no início do estudo foram reavaliados após dois anos para detectar o desenvolvimento da doença. RESULTADOS: Os volumes dos hemisférios cerebelares, lobo cerebelar posterior, vermis e lobo temporal estavam diminuídos proporcionalmente à gravidade da doença. Houve correlações positivas e significativas entre o Questionário de Atividades Funcionais, Mini Exame do Estado Mental e seus respectivos subtestes para linguagem e atenção com os volumes dos lobos temporal e cerebelar. A análise de regressão logística demonstrou que o volume reduzido do lobo temporal, lobo cerebelar posterior e vermis pode ser um fator de risco para o futuro desenvolvimento de demência. CONCLUSÃO: Este é o primeiro estudo que demonstrou que o volume do cerebelo pode estar reduzido na fase pré-demência e reforça o papel dessa estrutura na progressão da doença de Alzheimer. Considerando que o cerebelo pode não estar diretamente associado com a origem da doença de Alzheimer, este achado tem valor para o prognóstico.

  4. Coupled DEM-CFD analyses of landslide-induced debris flows

    CERN Document Server

    Zhao, Tao

    2017-01-01

    This book reflects the latest research results in computer modelling of landslide-induced debris flows. The book establishes an understanding of the initiation and propagation mechanisms of landslides by means of numerical simulations, so that mitigation strategies to reduce the long-term losses from landslide hazards can be devised. In this context, the book employs the Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) to investigate the mechanical and hydraulic behaviour of granular materials involved in landslides – an approach that yields meaningful insights into the flow mechanisms, concerning e.g. the mobilization of sediments, the generation and dissipation of excess pore water pressures, and the evolution of effective stresses. As such, the book provides valuable information, useful methods and robust numerical tools that can be successfully applied in the field of debris flow research.

  5. DEM4-26, Least Square Fit for IBM PC by Deming Method

    International Nuclear Information System (INIS)

    Rinard, P.M.; Bosler, G.E.

    1989-01-01

    1 - Description of program or function: DEM4-26 is a generalized least square fitting program based on Deming's method. Functions built into the program for fitting include linear, quadratic, cubic, power, Howard's, exponential, and Gaussian; others can easily be added. The program has the following capabilities: (1) entry, editing, and saving of data; (2) fitting of any of the built-in functions or of a user-supplied function; (3) plotting the data and fitted function on the display screen, with error limits if requested, and with the option of copying the plot to the printer; (4) interpolation of x or y values from the fitted curve with error estimates based on error limits selected by the user; and (5) plotting the residuals between the y data values and the fitted curve, with the option copying the plot to the printer. 2 - Method of solution: Deming's method

  6. Evaluating the Quality and Accuracy of TanDEM-X Digital Elevation Models at Archaeological Sites in the Cilician Plain, Turkey

    Directory of Open Access Journals (Sweden)

    Stefan Erasmi

    2014-10-01

    Full Text Available Satellite remote sensing provides a powerful instrument for mapping and monitoring traces of historical settlements and infrastructure, not only in distant areas and crisis regions. It helps archaeologists to embed their findings from field surveys into the broader context of the landscape. With the start of the TanDEM-X mission, spatially explicit 3D-information is available to researchers at an unprecedented resolution worldwide. We examined different experimental TanDEM-X digital elevation models (DEM that were processed from two different imaging modes (Stripmap/High Resolution Spotlight using the operational alternating bistatic acquisition mode. The quality and accuracy of the experimental DEM products was compared to other available DEM products and a high precision archaeological field survey. The results indicate the potential of TanDEM-X Stripmap (SM data for mapping surface elements at regional scale. For the alluvial plain of Cilicia, a suspected palaeochannel could be reconstructed. At the local scale, DEM products from TanDEM-X High Resolution Spotlight (HS mode were processed at 2 m spatial resolution using a merge of two monostatic/bistatic interferograms. The absolute and relative vertical accuracy of the outcome meet the specification of high resolution elevation data (HRE standards from the National System for Geospatial Intelligence (NSG at the HRE20 level.

  7. Quantitative Analysis of Accuracy of Voidage Computations in CFD-DEM Simulations

    Directory of Open Access Journals (Sweden)

    H. A. Khawaja

    2012-06-01

    Full Text Available CFD-DEM (Computational Fluid Dynamics – Discrete Element Modelling is a two-phase flow numerical modelling technique, where the Eulerian method is used for the fluid and the Lagrangian method for the particles. The two phases are coupled by a fluid-particle interaction force (i.e. drag force which is computed using a correlation. In a two-phase flow, one critical parameter is the voidage (or void fraction, which is defined as the ratio of the volume occupied by the fluid to the total volume. In a CFD-DEM simulation the local voidage is computed by calculating the volume of particles in a given fluid cell. For spherical particles, this computation is difficult when a particle is on the boundary of fluid cells. In this case, it is usual to compute the volume of a particle in a fluid cell approximately. One such approximation divides the volume of a particle into each cell in the same ratio as an equivalent cube of width equal to the particle diameter. Whilst this approach is computationally straight forward, the approximation introduces an error in the voidage computation. Here we estimate the error by comparing the approximate volume calculation with an exact (numerical computation of the volume of a particle in a fluid cell. The results show that the error varies with the position of the particle relative to the cell boundary. A new approach is suggested which limits the error to less than 2.5 %, without significantly increasing the computational complexity.

  8. Comparison Between 2D and 3D Simulations of Rate Dependent Friction Using DEM

    Science.gov (United States)

    Wang, C.; Elsworth, D.

    2017-12-01

    Rate-state dependent constitutive laws of frictional evolution have been successful in representing many of the first- and second- order components of earthquake rupture. Although this constitutive law has been successfully applied in numerical models, difficulty remains in efficient implementation of this constitutive law in computationally-expensive granular mechanics simulations using discrete element methods (DEM). This study introduces a novel approach in implementing a rate-dependent constitutive relation of contact friction into DEM. This is essentially an implementation of a slip-weakening constitutive law onto local particle contacts without sacrificing computational efficiency. This implementation allows the analysis of slip stability of simulated fault gouge materials. Velocity-stepping experiments are reported on both uniform and textured distributions of quartz and talc as 3D analogs of gouge mixtures. Distinct local slip stability parameters (a-b) are assigned to the quartz and talc, respectively. We separately vary talc content from 0 to 100% in the uniform mixtures and talc layer thickness from 1 to 20 particles in the textured mixtures. Applied shear displacements are cycled through velocities of 1μm/s and 10μm/s. Frictional evolution data are collected and compared to 2D simulation results. We show that dimensionality significantly impacts the evolution of friction. 3D simulation results are more representative of laboratory observed behavior and numerical noise is shown at a magnitude of 0.01 in terms of friction coefficient. Stability parameters (a-b) can be straightforwardly obtained from analyzing velocity steps, and are different from locally assigned (a-b) values. Sensitivity studies on normal stress, shear velocity, particle size, local (a-b) values, and characteristic slip distance (Dc) show that the implementation is sensitive to local (a-b) values and relations between (Dc) and particle size.

  9. A robust method of thin plate spline and its application to DEM construction

    Science.gov (United States)

    Chen, Chuanfa; Li, Yanyan

    2012-11-01

    In order to avoid the ill-conditioning problem of thin plate spline (TPS), the orthogonal least squares (OLS) method was introduced, and a modified OLS (MOLS) was developed. The MOLS of TPS (TPS-M) can not only select significant points, termed knots, from large and dense sampling data sets, but also easily compute the weights of the knots in terms of back-substitution. For interpolating large sampling points, we developed a local TPS-M, where some neighbor sampling points around the point being estimated are selected for computation. Numerical tests indicate that irrespective of sampling noise level, the average performance of TPS-M can advantage with smoothing TPS. Under the same simulation accuracy, the computational time of TPS-M decreases with the increase of the number of sampling points. The smooth fitting results on lidar-derived noise data indicate that TPS-M has an obvious smoothing effect, which is on par with smoothing TPS. The example of constructing a series of large scale DEMs, located in Shandong province, China, was employed to comparatively analyze the estimation accuracies of the two versions of TPS and the classical interpolation methods including inverse distance weighting (IDW), ordinary kriging (OK) and universal kriging with the second-order drift function (UK). Results show that regardless of sampling interval and spatial resolution, TPS-M is more accurate than the classical interpolation methods, except for the smoothing TPS at the finest sampling interval of 20 m, and the two versions of kriging at the spatial resolution of 15 m. In conclusion, TPS-M, which avoids the ill-conditioning problem, is considered as a robust method for DEM construction.

  10. Exploring the Potential of TanDEM-X Data in Rice Monitoring

    Science.gov (United States)

    Erten, E.

    2015-12-01

    In this work, phenological parameters such as growth stage, calendar estimation, crop density and yield estimation for rice fields are estimated employing TanDEM-X data. Currently, crop monitoring is country-dependent. Most countries have databases based on cadastral information and annual farmer inputs. Inaccuracies are coming from wrong or missing farmer declarations and/or coarsely updated cadastral boundary definitions. This leads to inefficient regulation of the market, frauds as well as to ecological risks. An accurate crop calendar is also missing, since farmers provide estimations in advance and there is no efficient way to know the growth status over large plantations. SAR data is of particular interest for these purposes. The proposed method includes two step approach including field detection and phenological state estimation. In the context of precise farming it is substantial to define field borders which are usually changing every cultivation period. Linking the SAR inherit properties to transplanting practice such as irrigation, the spatial database of rice-planted agricultural crops can be updated. Boundaries of agricultural fields will be defined in the database, and assignments of crops and sowing dates will be continuously updated by our monitoring system considering that sowing practice variously changes depending on the field owner decision. To define and segment rice crops, the system will make use of the fact that rice fields are characterized as flooded parcels separated by path networks composed by soil or rare grass. This natural segmentation is well detectable by inspecting low amplitude and coherence values of bistatic acquisitions. Once the field borders are defined, the phenology estimation of crops monitored at any time is the key point of monitoring. In this aspect the wavelength and the polarization option of TanDEM-X are enough to characterize the small phenological changes. The combination of bistatic interferometry and Radiative

  11. Application of Digital Elevation Model (DEM for description of soil microtopography changes in laboratory experiments

    Directory of Open Access Journals (Sweden)

    Stańczyk Tomasz

    2016-12-01

    Full Text Available In the study we evaluated spatial and quantitative changes in soil surface microtopography to describe water erosion process under simulated rain with use of a non-contact optical 3D scanner. The experiment was conducted in two variants: with and without drainage layer. Two clay soils collected from farmlands from the catchment of lake Zgorzała (Warsaw were investigated. Six tests of simulated rain were applied, with 55 mm·h−1. The surface roughness and microrelief were determined immediately after every 10 min of rainfall simulation by 3D scanner. The volume of surface and underground runoff as well as soil moisture were measured. The surface points coordinates obtained while scanning were interpolated using natural neighbour method and GIS software to generate Digital Elevation Models (DEM with a 0.5 mm resolution. Two DEM-derived surface roughness indices: Random Roughness (RR and Terrain Ruggedness Index (TRI were used for microrelief description. Calculated values of both roughness factors have decreased with time under the influence of rainfall in all analyzed variants. During the sprinkling the moisture of all samples had been growing rapidly from air-dry state reaching values close to the maximum water capacity (37–48% vol. in 20–30 min. Simultaneously the intensity of surface runoff was increasing and cumulative runoff value was: 17–35% for variants with drainage and 72–83% for the variants without drainage, relative to cumulative rainfall. The observed soil surface elevation changes were associated with aggregates decomposition, erosion and sedimentation, and above all, with a compaction of the soil, which was considered to be a dominant factor hindering the assessment of the erosion intensity of the of the scanned surface.

  12. EXTRACTING PRECISE AND AFFORDABLE DEMS DESPITE OF THE CLOUDS. AJAX: THE JOINING OF RADAR AND OPTICAL STRENGTHS

    Directory of Open Access Journals (Sweden)

    1 L. Cunin

    2012-07-01

    The DEMs extracted from TerraSAR-X and HRS proved extremely consistent with each other, showing a mean difference of 0.80m. This allows to propose a unified Elevation30 product to the users, with a guaranteed accuracy materialized into the product through a dedicated vertical Accuracy Commitment Mask.

  13. Relationship between oculomotor scanning determined by the DEM test and a contextual reading test in schoolchildren with reading difficulties.

    Science.gov (United States)

    Palomo-Alvarez, Catalina; Puell, María C

    2009-09-01

    The relationship between oculomotor scanning and reading in poor readers of primary school age is not well known. This study was designed to assess this relationship by determining mean Developmental Eye Movement (DEM) test times and reading speeds in a Spanish non-clinical population of children with poor reading skills but without dyslexia. We conducted a cross-sectional study on 81 poor readers (8-11 years of age) in the third to fifth grades recruited from 11 elementary schools in Madrid, Spain. In each subject with best spectacle correction, oculomotor scanning was measured using the DEM test, and reading speed (words per minute) was assessed by a standardized Spanish contextual reading test. Mean horizontal DEM times were higher than normative values for children in the third, fourth and fifth grades, by 20 seconds, 12 seconds, and 3 seconds respectively. Mean reading speeds were 18 words per minute lower than the norm for the third and fourth grades respectively, and 30 words per minute lower than the norm for the fifth grade. Reading speeds were significantly related to horizontal DEM times (r = -0.53, p school children at an early stage.

  14. Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816 / Vladimir Sazonov

    Index Scriptorium Estoniae

    Sazonov, Vladimir, 1979-

    2013-01-01

    Arvustus: Briefe aus dem Morgenland - Otto Friedrich von Richters Forschungsreise in den Jahren 1814-1816, hrsg. von Indrek Jürjo, Sergei Stadnikov, Hamburger Beiträge zur Geschichte des östlichen Europa, Bd. 20. Hamburg: Verlag Dr. Kovač 2013, 313 lk.

  15. Assessment of neuro-optometric rehabilitation using the Developmental Eye Movement (DEM test in adults with acquired brain injury

    Directory of Open Access Journals (Sweden)

    Neera Kapoor

    2018-04-01

    Full Text Available Purpose: This pilot study sought to determine the efficacy of using the Developmental Eye Movement (DEM test in the adult, acquired brain injury (ABI population to quantify clinically the effects of controlled, laboratory-performed, oculomotor-based vision therapy/vision rehabilitation. Methods: Nine adult subjects with mild traumatic brain injury (mTBI and five with stroke were assessed before and after an eight-week, computer-based, versional oculomotor (fixation, saccades, pursuit, and simulated reading training program (9.6 h total. The protocol incorporated a cross-over, interventional design with and without the addition of auditory feedback regarding two-dimensional eye position. The clinical outcome measure was the Developmental Eye Movement (DEM test score (ratio, errors taken before, midway, and immediately following training. Results: For the DEM ratio parameter, improvements were found in 80–89% of the subjects. For the DEM error parameter, improvements were found in 100% of the subjects. Incorporation of the auditory feedback component revealed a trend toward enhanced performance. The findings were similar for both DEM parameters, as well as for incorporation of the auditory feedback, in both diagnostic groups. Discussion: The results of the present study demonstrated considerable improvements in the DEM test scores following the oculomotor-based training, thus reflecting more time-optimal and accurate saccadic tracking after the training. The DEM test should be considered as another clinical test of global saccadic tracking performance in the ABI population. Resumen: Objetivo: Este estudio piloto trató de determinar la eficacia del uso de la prueba DEM (Developmental Eye Movement en la población adulta con daño cerebral adquirido (DCA para cuantificar clínicamente los efectos de la rehabilitación/terapia visual controlada, realizada en laboratorio, y de carácter oculomotor. Métodos: Se valoraron nueve sujetos adultos con

  16. DEM Development from Ground-Based LiDAR Data: A Method to Remove Non-Surface Objects

    Directory of Open Access Journals (Sweden)

    Maneesh Sharma

    2010-11-01

    Full Text Available Topography and land cover characteristics can have significant effects on infiltration, runoff, and erosion processes on watersheds. The ability to model the timing and routing of surface water and erosion is affected by the resolution of the digital elevation model (DEM. High resolution ground-based Light Detecting and Ranging (LiDAR technology can be used to collect detailed topographic and land cover characteristic data. In this study, a method was developed to remove vegetation from ground-based LiDAR data to create high resolution DEMs. Research was conducted on intensively studied rainfall–runoff plots on the USDA-ARS Walnut Gulch Experimental Watershed in Southeast Arizona. LiDAR data were used to generate 1 cm resolution digital surface models (DSM for 5 plots. DSMs created directly from LiDAR data contain non-surface objects such as vegetation cover. A vegetation removal method was developed which used a slope threshold and a focal mean filter method to remove vegetation and create bare earth DEMs. The method was validated on a synthetic plot, where rocks and vegetation were added incrementally. Results of the validation showed a vertical error of ±7.5 mm in the final DEM.

  17. Numerical Investigation of Simultaneously Deposition and Re-Entrainment Fouling Processes in Corrugated Tubes by Coupling CFD and DEM

    DEFF Research Database (Denmark)

    Hærvig, Jakob; Condra, Thomas Joseph; Sørensen, Kim

    Computational Fluid Dynamics (CFD) software OpenFOAM is coupled to the Discrete Element Method (DEM) software LIGGGHTS using the coupling software CFDEM. A four-way coupling is used to model fluid-particle and particle-particle interactions and thereby allowing for a particle fouling layer to build up along...

  18. Improving low-relief coastal LiDAR DEMs with hydro-conditioning of fine-scale and artificial drainages

    Directory of Open Access Journals (Sweden)

    Thomas Richard Allen

    2015-11-01

    Full Text Available Improvements in Light Detection and Ranging (LiDAR technology and spatial analysis of high-resolution digital elevation models (DEMs have advanced the accuracy and diversity of applications for coastal hazards and natural resources management. This article presents a concise synthesis of LiDAR analysis for coastal flooding and management applications in low-relief coastal plains and a case study demonstration of a new, efficient drainage mapping algorithm. The impetus for these LiDAR applications follows historic flooding from Hurricane Floyd in 1999, after which the State of North Carolina and the Federal Emergency Management Agency undertook extensive LiDAR data acquisition and technological developments for high-resolution floodplain mapping. An efficient algorithm is outlined for hydro-conditioning bare earth LiDAR DEMs using available US Geological Survey National Hydrography Dataset canal and ditch vectors. The methodology is illustrated in Moyock, North Carolina, for refinement of hydro-conditioning by combines pre-existing bare earth DEMs with spatial analysis of LiDAR point clouds in segmented and buffered ditch and canal networks. The methodology produces improved maps of fine-scale drainage, reduced omission of areal flood inundation, and subwatershed delineations that typify heavily ditched and canalled drainage areas. These preliminary results illustrate the capability of the technique to improve the representation of ditches in DEMs as well as subsequent flow and inundation modeling that could spur further research on low-relief coastal LiDAR applications.

  19. Investigation of Drag Force on Fibres of Bonded Spherical Elements using a Coupled CFD-DEM Approach

    DEFF Research Database (Denmark)

    Jensen, Anna Lyhne; Sørensen, Henrik; Rosendahl, Lasse Aistrup

    2016-01-01

    Clogging in wastewater pumps is often caused by flexible, stringy objects. Therefore, simulation of clogging effects in wastewater pumps entails simulation of such flexible objects and the interaction between these objects and fluid in the pump. Using a coupled CFD-DEM approach, the flexible obje...

  20. BOREAS HYP-8 DEM Data Over The NSA-MSA and SSA-MSA in The AEAC Projection

    Science.gov (United States)

    Knapp, David E.; Hall, Forrest G. (Editor); Wang, Xue-Wen; Band, L. E.; Smith, David E. (Technical Monitor)

    2000-01-01

    These data were derived from the original Digital Elevation Models (DEMs) produced by the Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-8 team. The original DEMs were in the Universal Transverse Mercator (UTM) projection, while this product is projected in the Albers Equal-Area Conic (AEAC) projection. The pixel size of the data is 100 meters, which is appropriate for the 1:50,000-scale contours from which the DEMs were made. The original data were compiled from information available in the 1970s and 1980s. This data set covers the two Modeling Sub-Areas (MSAs) that are contained within the Southern Study Area (SSA) and the Northern Study Area (NSA). The data are stored in binary, image format files. The DEM data over the NSA-MSA and SSA-MSA in the AEAC projection are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  1. High-accuracy single-pass InSAR DEM for large-scale flood hazard applications

    Science.gov (United States)

    Schumann, G.; Faherty, D.; Moller, D.

    2017-12-01

    In this study, we used a unique opportunity of the GLISTIN-A (NASA airborne mission designed to characterizing the cryosphere) track to Greenland to acquire a high-resolution InSAR DEM of a large area in the Red River of the North Basin (north of Grand Forks, ND, USA), which is a very flood-vulnerable valley, particularly in spring time due to increased soil moisture content near state of saturation and/or, typical for this region, snowmelt. Having an InSAR DEM that meets flood inundation modeling and mapping requirements comparable to LiDAR, would demonstrate great application potential of new radar technology for national agencies with an operational flood forecasting mandate and also local state governments active in flood event prediction, disaster response and mitigation. Specifically, we derived a bare-earth DEM in SAR geometry by first removing the inherent far range bias related to airborne operation, which at the more typical large-scale DEM resolution of 30 m has a sensor accuracy of plus or minus 2.5 cm. Subsequently, an intelligent classifier based on informed relationships between InSAR height, intensity and correlation was used to distinguish between bare-earth, roads or embankments, buildings and tall vegetation in order to facilitate the creation of a bare-earth DEM that would meet the requirements for accurate floodplain inundation mapping. Using state-of-the-art LiDAR terrain data, we demonstrate that capability by achieving a root mean squared error of approximately 25 cm and further illustrating its applicability to flood modeling.

  2. Understanding the microscopic moisture migration in pore space using DEM simulation

    Directory of Open Access Journals (Sweden)

    Yuan Guo

    2015-04-01

    Full Text Available The deformation of soil skeleton and migration of pore fluid are the major factors relevant to the triggering of and damages by liquefaction. The influence of pore fluid migration during earthquake has been demonstrated from recent model experiments and field case studies. Most of the current liquefaction assessment models are based on testing of isotropic liquefiable materials. However the recent New Zealand earthquake shows much severer damages than those predicted by existing models. A fundamental cause has been contributed to the embedded layers of low permeability silts. The existence of these silt layers inhibits water migration under seismic loads, which accelerated liquefaction and caused a much larger settlement than that predicted by existing theories. This study intends to understand the process of moisture migration in the pore space of sand using discrete element method (DEM simulation. Simulations were conducted on consolidated undrained triaxial testing of sand where a cylinder sample of sand was built and subjected to a constant confining pressure and axial loading. The porosity distribution was monitored during the axial loading process. The spatial distribution of porosity change was determined, which had a direct relationship with the distribution of excess pore water pressure. The non-uniform distribution of excess pore water pressure causes moisture migration. From this, the migration of pore water during the loading process can be estimated. The results of DEM simulation show a few important observations: (1 External forces are mainly carried and transmitted by the particle chains of the soil sample; (2 Porosity distribution during loading is not uniform due to non-homogeneous soil fabric (i.e. the initial particle arrangement and existence of particle chains; (3 Excess pore water pressure develops differently at different loading stages. At the early stage of loading, zones with a high initial porosity feature higher

  3. CREATION OF A MULTIRESOLUTION AND MULTIACCURACY DTM: PROBLEMS AND SOLUTIONS FOR HELI-DEM CASE STUDY

    Directory of Open Access Journals (Sweden)

    L. Biagi

    2014-01-01

    Full Text Available The work is part of "HELI-DEM" (HELvetia-Italy Digital Elevation Model project, funded by the European Regional Development Fund within the Italy-Switzerland cooperation program. The aim of the project is the creation of a unique DTM for the alpine and subalpine area between Italy (Piedmont, Lombardy and Switzerland (Ticino and Grisons Cantons; at present, different DTMs, that are in different reference frames and have been obtained with different technologies, accuracies, and resolutions, have been acquired. The final DTM should be correctly georeferenced and produced validating and integrating the data that are available for the project. DTMs are fundamental in hydrogeological studies, especially in alpine areas where hydrogeological risks may exist. Moreover, when an event, like for example a landslide, happens at the border between countries, a unique and integrated DTM which covers the interest area is useful to analyze the scenario. In this sense, HELI-DEM project is helpful. To perform analyses along the borders between countries, transnational geographic information is needed: a transnational DTM can be obtained by merging regional low resolution DTMs. Moreover high resolution local DTMs should be used where they are available. To be merged, low and high resolution DTMs should be in the same three dimensional reference frame, should not present biases and should be consistent in the overlapping areas. Cross-validation between the different DTMs is therefore needed. Two different problems should be solved: the merging of regional, partly overlapping low and medium resolution DTMs into a unique low/medium resolution DTM and the merging with other local high resolution/high accuracy height data. This paper discusses the preliminary processing of the data for the fusion of low and high resolution DTMs in a study-case area within the Lombardy region: Valtellina valley. In this region the Lombardy regional low resolution DTM is available, with

  4. Fusion of space-borne multi-baseline and multi-frequency interferometric results based on extended Kalman filter to generate high quality DEMs

    Science.gov (United States)

    Zhang, Xiaojie; Zeng, Qiming; Jiao, Jian; Zhang, Jingfa

    2016-01-01

    Repeat-pass Interferometric Synthetic Aperture Radar (InSAR) is a technique that can be used to generate DEMs. But the accuracy of InSAR is greatly limited by geometrical distortions, atmospheric effect, and decorrelations, particularly in mountainous areas, such as western China where no high quality DEM has so far been accomplished. Since each of InSAR DEMs generated using data of different frequencies and baselines has their own advantages and disadvantages, it is therefore very potential to overcome some of the limitations of InSAR by fusing Multi-baseline and Multi-frequency Interferometric Results (MMIRs). This paper proposed a fusion method based on Extended Kalman Filter (EKF), which takes the InSAR-derived DEMs as states in prediction step and the flattened interferograms as observations in control step to generate the final fused DEM. Before the fusion, detection of layover and shadow regions, low-coherence regions and regions with large height error is carried out because MMIRs in these regions are believed to be unreliable and thereafter are excluded. The whole processing flow is tested with TerraSAR-X and Envisat ASAR datasets. Finally, the fused DEM is validated with ASTER GDEM and national standard DEM of China. The results demonstrate that the proposed method is effective even in low coherence areas.

  5. Recent developments in the electricity generation market in 2014; Aktuelle Entwicklungen auf dem Stromerzeugungsmarkt im Jahr 2014

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Holger [Oppenhoff und Partner Rechtsanwaelte Steuerberater mbB, Koeln (Germany)

    2015-02-16

    Following up the report on the developments in the Electricity market from last year to this case this article shall give an overview of the current developments in 2014. The year 2014 was marked by the energy sector Program of the coalition agreement, which, under the three objectives of security of supply Affordability and environmental impact which has made clear Specifications for the production side in particular with regard to the final Nuclear Phase-out phase, the announced amendment of the EEG, system stability and also Fracking. The predominant theme in 2014 this was certainly the reform of the EEG and around it rambling topics on European level. Too much uncertainty with plant operators, investors and companies in German power generation market, has led in addition to the mentioned legislative package the revision of the EU environmental and energy aid guidelines, State aid procedure of the European Commission regarding the German promotion of electricity from renewable Energy and the process in the case of Aaland Vindkraft before the ECJ. The dynamics on the generation side, inter alia through the increased connection of decentralized generation plants, result in an increasing regulation in power generation. Finally a first bill for Fracking is published at the end of 2014. [German] Anknuepfend an den Bericht ueber die Entwicklungen auf dem Stromerzeugungsmarkt aus dem letzten Jahr soll dieser Beitrag einen Ueberblick ueber die aktuellen Entwicklungen in 2014 geben. Das Jahr 2014 war gepraegt von dem energiewirtschaftlichen Programm des Koalitionsvertrags, das unter dem Zieldreieck aus Versorgungssicherheit, Preisguenstigkeit und Umweltvertraeglichkeit klare Vorgaben fuer die Erzeugerseite vor allem mit Blick auf den endgueltigen Atomausstieg, die angekuendigte Novellierung des EEG, Systemstabilitaet und auch Fracking gemacht hat. Das vorherrschende Thema im Jahr 2014 war hierbei sicherlich die Reform des EEG sowie die sich darum rankenden Themen auf

  6. Experimental dem Extraction from Aster Stereo Pairs and 3d Registration Based on Icesat Laser Altimetry Data in Upstream Area of Lambert Glacier, Antarctica

    Science.gov (United States)

    Hai, G.; Xie, H.; Chen, J.; Chen, L.; Li, R.; Tong, X.

    2017-09-01

    DEM Extraction from ASTER stereo pairs and three-dimensional registration by reference to ICESat laser altimetry data are carried out in upstream area of Lambert Glacier, East Antarctica. Since the study area is located in inland of East Antarctica where few textures exist, registration between DEM and ICESat data is performed. Firstly, the ASTER DEM generation is based on rational function model (RFM) and the procedure includes: a) rational polynomial coefficient (RPC) computation from ASTER metadata, b) L1A image product de-noise and destriping, c) local histogram equalization and matching, d) artificial collection of tie points and bundle adjustment, and e) coarse-to-fine hierarchical matching of five levels and grid matching. The matching results are filtered semi-automatically. Hereafter, DEM is interpolated using spline method with ground points converted from matching points. Secondly, the generated ASTER DEM is registered to ICESat data in three-dimensional space after Least-squares rigid transformation using singular value decomposition (SVD). The process is stated as: a) correspondence selection of terrain feature points from ICESat and DEM profiles, b) rigid transformation of generated ASTER DEM using selected feature correspondences based on least squares technique. The registration shows a good result that the elevation difference between DEM and ICESat data is low with a mean value less than 2 meters and the standard deviation around 7 meters. This DEM is generated and specially registered in Antarctic typical region without obvious ground rock control points and serves as true terrain input for further radar altimetry simulation.

  7. Insight From the Statistics of Nothing: Estimating Limits of Change Detection Using Inferred No-Change Areas in DEM Difference Maps and Application to Landslide Hazard Studies

    Science.gov (United States)

    Haneberg, W. C.

    2017-12-01

    Remote characterization of new landslides or areas of ongoing movement using differences in high resolution digital elevation models (DEMs) created through time, for example before and after major rains or earthquakes, is an attractive proposition. In the case of large catastrophic landslides, changes may be apparent enough that simple subtraction suffices. In other cases, statistical noise can obscure landslide signatures and place practical limits on detection. In ideal cases on land, GPS surveys of representative areas at the time of DEM creation can quantify the inherent errors. In less-than-ideal terrestrial cases and virtually all submarine cases, it may be impractical or impossible to independently estimate the DEM errors. Examining DEM difference statistics for areas reasonably inferred to have no change, however, can provide insight into the limits of detectability. Data from inferred no-change areas of airborne LiDAR DEM difference maps of the 2014 Oso, Washington landslide and landslide-prone colluvium slopes along the Ohio River valley in northern Kentucky, show that DEM difference maps can have non-zero mean and slope dependent error components consistent with published studies of DEM errors. Statistical thresholds derived from DEM difference error and slope data can help to distinguish between DEM differences that are likely real—and which may indicate landsliding—from those that are likely spurious or irrelevant. This presentation describes and compares two different approaches, one based upon a heuristic assumption about the proportion of the study area likely covered by new landslides and another based upon the amount of change necessary to ensure difference at a specified level of probability.

  8. BRS Deméter: nova cultivar de cevada cervejeira irrigada para o Cerrado do Brasil Central BRS Deméter: new malting barley cultivar for irrigated Brazilian savanna

    Directory of Open Access Journals (Sweden)

    Renato Fernando Amabile

    2008-09-01

    Full Text Available BRS Deméter é uma cultivar de cevada dística (duas fileiras de grãos de ampla adaptação, sob irrigação, ao Cerrado do Brasil Central. Apresenta potencial produtivo de grãos acima de 5.000 kg ha-1, estabilidade de produção e alta qualidade industrial malte-cervejeira. A cultivar atende às demandas do produtor por rendimento competitivo e às da indústria malteira por alta qualidade cervejeira.BRS Deméter is a spring, two-rowed barley, widely adapted to irrigated areas of the savanna, in Central Brazil. It presents production stability and high malting quality, with yield potential above 5,000 kg ha-1. It fulfills both the farmer and malting industry expectations regarding competitive yield and brewing quality.

  9. Volcanic activity at Etna volcano, Sicily, Italy between June 2011 and March 2017 studied with TanDEM-X SAR interferometry

    Science.gov (United States)

    Kubanek, J.; Raible, B.; Westerhaus, M.; Heck, B.

    2017-12-01

    High-resolution and up-to-date topographic data are of high value in volcanology and can be used in a variety of applications such as volcanic flow modeling or hazard assessment. Furthermore, time-series of topographic data can provide valuable insights into the dynamics of an ongoing eruption. Differencing topographic data acquired at different times enables to derive areal coverage of lava, flow volumes, and lava extrusion rates, the most important parameters during ongoing eruptions for estimating hazard potential, yet most difficult to determine. Anyhow, topographic data acquisition and provision is a challenge. Very often, high-resolution data only exists within a small spatial extension, or the available data is already outdated when the final product is provided. This is especially true for very dynamic landscapes, such as volcanoes. The bistatic TanDEM-X radar satellite mission enables for the first time to generate up-to-date and high-resolution digital elevation models (DEMs) repeatedly using the interferometric phase. The repeated acquisition of TanDEM-X data facilitates the generation of a time-series of DEMs. Differencing DEMs generated from bistatic TanDEM-X data over time can contribute to monitor topographic changes at active volcanoes, and can help to estimate magmatic ascent rates. Here, we use the bistatic TanDEM-X data to investigate the activity of Etna volcano in Sicily, Italy. Etna's activity is characterized by lava fountains and lava flows with ash plumes from four major summit crater areas. Especially the newest crater, the New South East Crater (NSEC) that was formed in 2011 has been highly active in recent years. Over one hundred bistatic TanDEM-X data pairs were acquired between January 2011 and March 2017 in StripMap mode, covering episodes of lava fountaining and lava flow emplacement at Etna's NSEC and its surrounding area. Generating DEMs of every bistatic data pair enables us to assess areal extension of the lava flows, to

  10. DEM simulation of particle mixing for optimizing the overcoating drum in HTR fuel fabrication

    Science.gov (United States)

    Liu, Malin; Lu, Zhengming; Liu, Bing; Shao, Youlin

    2013-06-01

    The rotating drum was used for overcoating coated fuel particles in HTR fuel fabrication process. All the coated particles should be adhered to equal amount of graphite powder, which means that the particle should be mixed quickly in both radial and axial directions. This paper investigated the particle flow dynamics and mixing behavior in different regimes using the discrete element method (DEM). By varying the rotation speed, different flow regimes such as slumping, rolling, cascading, cataracting, centrifuging were produced. The mixing entropy based on radial and axial grid was introduced to describe the radial and axial mixing behaviors. From simulation results, it was found that the radial mixing can be achieved in the cascading regime more quickly than the slumping, rolling and centrifuging regimes, but the traditional rotating drum without internal components can not achieve the requirements of axial mixing and should be improved. Three different structures of internal components are proposed and simulated. The new V-shaped deflectors were found to achieve a quick axial mixing behavior and uniform axial distribution in the rotating drum based on simulation results. At last, the superiority was validated by experimental results, and the new V-shaped deflectors were used in the industrial production of the overcoating coated fuel particles in HTR fuel fabrication process.

  11. Investigating the Effects of Underplating at Raukumara Peninsula, New Zealand: Insights from DEM Modeling

    Science.gov (United States)

    Farrell, W. C.; Morgan, J.

    2017-12-01

    It is thought that subcretion and underplating are important processes at subduction zones worldwide. Despite its proposed common occurrence, the physical mechanisms controlling if underplating occurs and the rate of its associated uplift are poorly understood. Basic questions about the tectonic and geomechanical parameters governing subduction channel stability, subcretion, and the rate and shape of associated uplift have proven difficult to answer. In this study we employ the Discrete Element Method (DEM) to address these questions, using the Raukumara Peninsula of New Zealand as the real-world basis of many of our model inputs. Multiple geophysical datasets suggest that the Raukumara Peninsula is underlain by underplated sediments at Moho depths, and these may be responsible for anomalously high rates of uplift in the area. The combined geologic, geophysical, and geodetic data from the region serve to constrain model geometries and boundary conditions, allowing us to test the mechanisms for underplating and upper crustal response. The effects of surface processes and potential for shallow trenchward sliding are also investigated in the modeling effort.

  12. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    International Nuclear Information System (INIS)

    Cho, Migyung

    2017-01-01

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  13. Discrete element method (DEM) simulations of stratified sampling during solid dosage form manufacturing.

    Science.gov (United States)

    Hancock, Bruno C; Ketterhagen, William R

    2011-10-14

    Discrete element model (DEM) simulations of the discharge of powders from hoppers under gravity were analyzed to provide estimates of dosage form content uniformity during the manufacture of solid dosage forms (tablets and capsules). For a system that exhibits moderate segregation the effects of sample size, number, and location within the batch were determined. The various sampling approaches were compared to current best-practices for sampling described in the Product Quality Research Institute (PQRI) Blend Uniformity Working Group (BUWG) guidelines. Sampling uniformly across the discharge process gave the most accurate results with respect to identifying segregation trends. Sigmoidal sampling (as recommended in the PQRI BUWG guidelines) tended to overestimate potential segregation issues, whereas truncated sampling (common in industrial practice) tended to underestimate them. The size of the sample had a major effect on the absolute potency RSD. The number of sampling locations (10 vs. 20) had very little effect on the trends in the data, and the number of samples analyzed at each location (1 vs. 3 vs. 7) had only a small effect for the sampling conditions examined. The results of this work provide greater understanding of the effect of different sampling approaches on the measured content uniformity of real dosage forms, and can help to guide the choice of appropriate sampling protocols. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Blurring the boundary between rapid granular flow and dense granular flow regimes: Evidence from DEM simulations

    Science.gov (United States)

    Tripathi, Anurag; Prasad, Mahesh; Kumar, Puneet

    2017-11-01

    The saturation of the effective friction coefficient for granular flows at high inertial numbers has been assumed widely by researchers, despite little simulation/experimental evidence. In contrast, a recent simulation study of plane shear flows by Mandal and Khakhar, suggests that the effective friction coefficient becomes maximum and then starts to decrease with increase in the inertial number for I > 0.5 . In order to investigate whether such a dip at higher inertial numbers is indeed a feature of granular rheology, we perform DEM simulations of chute flow of highly inelastic disks. We show that steady, fully developed flows are possible at inclinations much higher than those normally reported in literature. At such high inclinations, the flow is characterised by a significant slip at the base; the height of the layer increases by more than 300 % and kinetic energy of the layer increases by nearly 5 orders of magnitude. We observe, for the first time, steady chute flows at inertial number I 2 and show that the dip at higher inertial numbers can be observed in case of chute flow as well. The predictions of modified μ - I rheology, however, seem to remain valid in the bulk of the layer for packing fractions as low as 0.2. AT acknowledges the funding obtained from IIT Kanpur through the initiation Grant for this study.

  15. Mapping Landslides in Lunar Impact Craters Using Chebyshev Polynomials and Dem's

    Science.gov (United States)

    Yordanov, V.; Scaioni, M.; Brunetti, M. T.; Melis, M. T.; Zinzi, A.; Giommi, P.

    2016-06-01

    Geological slope failure processes have been observed on the Moon surface for decades, nevertheless a detailed and exhaustive lunar landslide inventory has not been produced yet. For a preliminary survey, WAC images and DEM maps from LROC at 100 m/pixels have been exploited in combination with the criteria applied by Brunetti et al. (2015) to detect the landslides. These criteria are based on the visual analysis of optical images to recognize mass wasting features. In the literature, Chebyshev polynomials have been applied to interpolate crater cross-sections in order to obtain a parametric characterization useful for classification into different morphological shapes. Here a new implementation of Chebyshev polynomial approximation is proposed, taking into account some statistical testing of the results obtained during Least-squares estimation. The presence of landslides in lunar craters is then investigated by analyzing the absolute values off odd coefficients of estimated Chebyshev polynomials. A case study on the Cassini A crater has demonstrated the key-points of the proposed methodology and outlined the required future development to carry out.

  16. Effect of Nonsmooth Nose Surface of the Projectile on Penetration Using DEM Simulation

    Directory of Open Access Journals (Sweden)

    Jing Han

    2017-01-01

    Full Text Available The nonsmooth body surface of the reptile in nature plays an important role in reduction of resistance and friction when it lives in a soil environment. To consider whether it was feasible for improving the performance of penetrating projectile we investigated the influence of the convex as one of nonsmooth surfaces for the nose of projectile. A numerical simulation study of the projectile against the concrete target was developed based on the discrete element method (DEM. The results show that the convex nose surface of the projectile is beneficial for reducing the penetration resistance greatly, which is also validated by the experiments. Compared to the traditional smooth nose structure, the main reason of difference is due to the local contact normal pressure, which increases dramatically due to the abrupt change of curvature caused by the convex at the same condition. Accordingly, the broken particles of the concrete target obtain more kinetic energy and their average radial flow velocities will drastically increase simultaneously, which is in favor of decreasing the interface friction and the compaction density of concrete target around the nose of projectile.

  17. Modelling of Coke Layer Collapse during Ore Charging in Ironmaking Blast Furnace by DEM

    Science.gov (United States)

    Narita, Yoichi; Mio, Hiroshi; Orimoto, Takashi; Nomura, Seiji

    2017-06-01

    A technical issue in an ironmaking blast furnace operation is to realize the optimum layer thickness and the radial distribution of burden (ore and coke) to enhance its efficiency and productivity. When ore particles are charged onto the already-embedded coke layer, the coke layer-collapse phenomenon occurs. The coke layer-collapse phenomenon has a significant effect on the distribution of ore and coke layer thickness in the radial direction. In this paper, the mechanical properties of coke packed bed under ore charging were investigated by the impact-loading test and the large-scale direct shear test. Experimental results show that the coke particle is broken by the impact force of ore charging, and the particle breakage leads to weaken of coke-layer strength. The expression of contact force for coke in Discrete Element Method (DEM) was modified based on the measured data, and it followed by the 1/3-scaled experiment on coke's collapse phenomena. Comparing a simulation by modified model to the 1/3-scaled experiment, they agreed well in the burden distribution.

  18. Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Migyung [Tongmyong Univ., Busan (Korea, Republic of)

    2017-02-15

    Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

  19. Waste incineration on its way to the power plants; Muellverbrennung auf dem Weg zum Kraftwerk

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J. [STEAG encotec GmbH, Essen (Germany); Neukirchen, B. [STEAG AG, Essen (Germany)

    2004-07-01

    Looking at the year 2005 and the end of disposal of untreated domestic waste the politic hopes that the prognosticated lack of waste treatment capacity is remedied by coal-fired power plants. The classical municipal waste incinerators by contrast want to get recognition as energetic recycler in comparison with power stations. The decision of the European Court of Justice concerning recycling and disposal of domestic waste by incineration has started the discussion and competition on fuel-rich commercial waste. Are municipal waste incineration plants power stations or must power plants be regarded as incinerators? These questions are still open. (orig.) [German] Mit Blick auf das Jahr 2005 und das Ende der Ablagerung von unbehandeltem Siedlungsabfall hofft die Politik, dass der prognostizierte Mangel an Vorbehandlungskapazitaeten von den Kohlekraftwerken behoben wird. Die klassischen Muellverbrennungsanlagen wollen dagegen mit dem Kraftwerksvergleich die Anerkennung als energetische Verwerter erreichen. Das EuGH-Urteil zur Verwertung oder Beseitigung von Siedlungsabfall durch Verbrennen hat in diesem Jahr die Diskussion und den Kampf um den heizwertreichen Gewerbeabfall angeheizt. Die Frage, wie weit in Zukunft die Muellverbrennungsanlagen als Kraftwerke, aber auch die Kraftwerke als Muellverbrennungsanlagen angesehen werden muessen, ist noch offen. (orig.)

  20. Landslide Change Detection Based on Multi-Temporal Airborne LiDAR-Derived DEMs

    Directory of Open Access Journals (Sweden)

    Omar E. Mora

    2018-01-01

    Full Text Available Remote sensing technologies have seen extraordinary improvements in both spatial resolution and accuracy recently. In particular, airborne laser scanning systems can now provide data for surface modeling with unprecedented resolution and accuracy, which can effectively support the detection of sub-meter surface features, vital for landslide mapping. Also, the easy repeatability of data acquisition offers the opportunity to monitor temporal surface changes, which are essential to identifying developing or active slides. Specific methods are needed to detect and map surface changes due to landslide activities. In this paper, we present a methodology that is based on fusing probabilistic change detection and landslide surface feature extraction utilizing multi-temporal Light Detection and Ranging (LiDAR derived Digital Elevation Models (DEMs to map surface changes demonstrating landslide activity. The proposed method was tested in an area with numerous slides ranging from 200 m2 to 27,000 m2 in area under low vegetation and tree cover, Zanesville, Ohio, USA. The surface changes observed are probabilistically evaluated to determine the likelihood of the changes being landslide activity related. Next, based on surface features, a Support Vector Machine (SVM quantifies and maps the topographic signatures of landslides in the entire area. Finally, these two processes are fused to detect landslide prone changes. The results demonstrate that 53 out of 80 inventory mapped landslides were identified using this method. Additionally, some areas that were not mapped in the inventory map displayed changes that are likely to be developing landslides.

  1. Extraction of Dems and Orthoimages from Archive Aerial Imagery to Support Project Planning in Civil Engineering

    Science.gov (United States)

    Cogliati, M.; Tonelli, E.; Battaglia, D.; Scaioni, M.

    2017-12-01

    Archive aerial photos represent a valuable heritage to provide information about land content and topography in the past years. Today, the availability of low-cost and open-source solutions for photogrammetric processing of close-range and drone images offers the chance to provide outputs such as DEM's and orthoimages in easy way. This paper is aimed at demonstrating somehow and to which level of accuracy digitized archive aerial photos may be used within a such kind of low-cost software (Agisoft Photoscan Professional®) to generate photogrammetric outputs. Different steps of the photogrammetric processing workflow are presented and discussed. The main conclusion is that this procedure may come to provide some final products, which however do not feature the high accuracy and resolution that may be obtained using high-end photogrammetric software packages specifically designed for aerial survey projects. In the last part a case study is presented about the use of four-epoch archive of aerial images to analyze the area where a tunnel has to be excavated.

  2. Case studies of heat conduction in rotary drums with L-shaped lifters via DEM

    Directory of Open Access Journals (Sweden)

    Qiang Xie

    2018-03-01

    Full Text Available Rotary drums are widely used in numerous processes in industry to handle granular materials. In present work, heat transfer processes in drums with L-shaped lifters have been investigated by coupling the discrete element method (DEM with heat transfer model. Effects of both operational and structural parameters have been analyzed. It is found that increasing rotational speed could improve heat transfer to a certain extent, however, just in relatively low speed stage. When lifter number increases, the heat transfer speed slightly decreases. An increasing lifter height could promote heat transfer first and then reduces it, but the amplitude of variation keeps small. The heat transfer rate descends with increasing lifter width. The heat transfer mechanisms have also been discussed by comparing mixing rates, total contact areas for thermal conduction, time constants (TC indicating apparent heat transfer rate and effective heat transfer coefficients(HTC. It is concluded that dynamic conduction due to particle flow is dominated in all cases. The L-shaped lifers are turned out not a good choice when heat conduction between particles is prominent.

  3. Transformation (normalization) of slope gradient and surface curvatures, automated for statistical analyses from DEMs

    Science.gov (United States)

    Csillik, O.; Evans, I. S.; Drăguţ, L.

    2015-03-01

    Automated procedures are developed to alleviate long tails in frequency distributions of morphometric variables. They minimize the skewness of slope gradient frequency distributions, and modify the kurtosis of profile and plan curvature distributions toward that of the Gaussian (normal) model. Box-Cox (for slope) and arctangent (for curvature) transformations are tested on nine digital elevation models (DEMs) of varying origin and resolution, and different landscapes, and shown to be effective. Resulting histograms are illustrated and show considerable improvements over those for previously recommended slope transformations (sine, square root of sine, and logarithm of tangent). Unlike previous approaches, the proposed method evaluates the frequency distribution of slope gradient values in a given area and applies the most appropriate transform if required. Sensitivity of the arctangent transformation is tested, showing that Gaussian-kurtosis transformations are acceptable also in terms of histogram shape. Cube root transformations of curvatures produced bimodal histograms. The transforms are applicable to morphometric variables and many others with skewed or long-tailed distributions. By avoiding long tails and outliers, they permit parametric statistics such as correlation, regression and principal component analyses to be applied, with greater confidence that requirements for linearity, additivity and even scatter of residuals (constancy of error variance) are likely to be met. It is suggested that such transformations should be routinely applied in all parametric analyses of long-tailed variables. Our Box-Cox and curvature automated transformations are based on a Python script, implemented as an easy-to-use script tool in ArcGIS.

  4. Probability- and curve-based fractal reconstruction on 2D DEM terrain profile

    International Nuclear Information System (INIS)

    Lai, F.-J.; Huang, Y.M.

    2009-01-01

    Data compression and reconstruction has been playing important roles in information science and engineering. As part of them, image compression and reconstruction that mainly deal with image data set reduction for storage or transmission and data set restoration with least loss is still a topic deserved a great deal of works to focus on. In this paper we propose a new scheme in comparison with the well-known Improved Douglas-Peucker (IDP) method to extract characteristic or feature points of two-dimensional digital elevation model (2D DEM) terrain profile to compress data set. As for reconstruction in use of fractal interpolation, we propose a probability-based method to speed up the fractal interpolation execution to a rate as high as triple or even ninefold of the regular. In addition, a curve-based method is proposed in the study to determine the vertical scaling factor that much affects the generation of the interpolated data points to significantly improve the reconstruction performance. Finally, an evaluation is made to show the advantage of employing the proposed new method to extract characteristic points associated with our novel fractal interpolation scheme.

  5. Biomass utilisation seen against the background of AGENDA 21; Biomassenutzung vor dem Hintergrund der AGENDA 21

    Energy Technology Data Exchange (ETDEWEB)

    Schoenwiesner-Bozkurt, C. [efreso AG, Muenchen (Germany)

    2000-07-01

    From 3 to 14 June 1992 Rio de Janeiro was host to the largest conference that had ever taken place up to that point in human history, the United Nations Conference on Environment and Development (UNCED). One major programmatic outcome of the conference was the approval of Agenda 21. This document was signed by 179 states, but it is not binding under international law. Altogether AGENDA 21 comprises 40 chapters. The present paper draws on a selection of these chapters to exemplify the significance of energy production from biomass and its relationship with the goals of Agenda 21. The author has refrained from discussing the issue of climate and energy policy in a wider context, as this matter will undoubtedly already be known to the reader. [German] Zwischen dem 03. und 14. Juni 1992 fand in Rio die bis dahin groesste Konferenz der Menschheitsgeschichte statt. Die Konferenz der Vereinten Nationen ueber Umwelt und Entwicklung 'United Nations Conference on Environment and Development (UNCED)'. Als greifbares programmatisches Ergebnis der Konferenz wurde am Ende die Agenda 21 verabschiedet. Sie wurde von 179 Staaten unterzeichnet, ist aber voelkerrechtlich nicht verbindlich. Insgesamt umfasst die Agenda 21 40 Einzelkapitel. Beispielhaft soll anhand einiger Kapitel die Bedeutung und der Zusammenhang zwischen der energetischen Nutzung der Biomasse und den Zielen der Agenda 21 aufgezeigt werden. Bewusst wird hierbei der Themenbereich 'Klima- und Energiepolitik' nicht weiter betrachtet, da dieser Zusammenhang den Teilnehmern sicherlich bekannt ist. (orig.)

  6. Methodological application so as to obtain digital elevation models DEM in wetland areas

    International Nuclear Information System (INIS)

    Quintero, Deiby A; Montoya V, Diana M; Betancur, Teresita

    2009-01-01

    In order to understand hydrological systems and the description of flow processes that occur among its components it is essential to have a physiographic description that morphometric and relief characteristics. When local studies are performed, the basic cartography available, in the best case 1:25,000 scale, tends not to obey the needs required to represent the water dynamics that characterize the interactions between streams, aquifers and lenticular water bodies in flat zones particularly in those where there are wetlands localized in ancient F100D plains of rivers. A lack of financial resources is the principal obstacle to acquiring; information that is current and sufficient for the scale of the project. Geomorphologic conditions of flat relief zones are a good alternative for the construction of the new data. Using the basic cartography available and the new data, it is possible to obtain DEMs that are improved and consistent with the dynamics of surface and groundwater flows in the hydrological system. To accomplish this one must use spatial modeling tools coupled with Geographic Information System - GIS. This article present a methodological application for the region surrounding the catchment of wetland Cienaga Colombia in the Bajo Cauca region of Antioquia.

  7. DEM simulation of undrained behaviour with preshearing history for saturated granular media

    International Nuclear Information System (INIS)

    Gong, Guobin; Zha, Xiaoxiong

    2013-01-01

    This paper presents the results of the three-dimensional (3D) discrete element method (DEM) simulations of undrained axisymmetric/triaxial tests on loose assemblies of polydisperse spheres with and without preshearing history using a periodic cell. Undrained tests are modelled by deforming the samples under constant volume conditions. The simulations show that the preshearing process will not induce initial structural anisotropy, and that the presheared and unpresheared samples follow the same initial stress path along a unique limiting boundary in the q–p space, as observed in the published experimental literature, which was not crossed over by any of the stress paths of the presheared samples. It is also shown that the presheared samples are denser compared with the original unpresheared one, and therefore exhibit higher resistance to (temporary) liquefaction. At the grain scale, such higher resistance is found to be attributed to the evolution of a redundancy factor, a microscopic definition of liquefaction (temporary liquefaction). The Lade instability (peak deviator stress) is found to correspond to a unique mechanical coordination number of 4.5, independent of preshearing history. It is also found that the onset of liquefaction (temporary liquefaction) in terms of the redundancy factor lags behind the onset of macroscopic strain softening in terms of the Lade instability for the presheared and unpresheared samples under undrained conditions. (paper)

  8. Automated Topographic Change Detection via Dem Differencing at Large Scales Using The Arcticdem Database

    Science.gov (United States)

    Candela, S. G.; Howat, I.; Noh, M. J.; Porter, C. C.; Morin, P. J.

    2016-12-01

    In the last decade, high resolution satellite imagery has become an increasingly accessible tool for geoscientists to quantify changes in the Arctic land surface due to geophysical, ecological and anthropomorphic processes. However, the trade off between spatial coverage and spatial-temporal resolution has limited detailed, process-level change detection over large (i.e. continental) scales. The ArcticDEM project utilized over 300,000 Worldview image pairs to produce a nearly 100% coverage elevation model (above 60°N) offering the first polar, high spatial - high resolution (2-8m by region) dataset, often with multiple repeats in areas of particular interest to geo-scientists. A dataset of this size (nearly 250 TB) offers endless new avenues of scientific inquiry, but quickly becomes unmanageable computationally and logistically for the computing resources available to the average scientist. Here we present TopoDiff, a framework for a generalized. automated workflow that requires minimal input from the end user about a study site, and utilizes cloud computing resources to provide a temporally sorted and differenced dataset, ready for geostatistical analysis. This hands-off approach allows the end user to focus on the science, without having to manage thousands of files, or petabytes of data. At the same time, TopoDiff provides a consistent and accurate workflow for image sorting, selection, and co-registration enabling cross-comparisons between research projects.

  9. Dewatering of sludge using the hydrosoft high-pressure process; Entwaessern von Schlaemmen mit dem Hydrosoft-Hochdruckverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Eder, C.; Eder, G. [Christian Eder Technology GbR, Neunkirchen (Germany)

    1999-07-01

    The hydrosoft process permits to dewater sludge, especially also sludge from municipal sewage treatment plant, until it contains a high proportion of dry substance. For existing dewatering systems equipped with the long-lived chamber filter presses, too, the dry matter content of the filter cake can be substantially increased using the hydrosoft process; only the pump system must be retrofitted. As a preliminary measure, tests with mobile pilot plants should be carried out. (orig.) [German] Mit dem Hydrosoft-Verfahren besteht die Moeglichkeit Schlaemme, insbesondere auch Schlaemme aus kommunalen Klaeranlagen, auf hohe Trockensubstanz-Gehalte zu entwaessern. Auch bei bestehenden Entwaesserungsanlagen, die mit den langlebigen Kammerfilterpressen ausgeruestet sind, koennen die Trockensubstanzgehalte der Filterkuchen mit dem Hydrosoft-Verfahren, fuer das dann nur noch das Pumpsystem nachgeruestet werden muss, wesentlich angehoben werden. Vorausgehen sollten jeweils Vorversuche mit mobilen Versuchsanlagen. (orig.)

  10. Dementia Population Risk Tool (DemPoRT): study protocol for a predictive algorithm assessing dementia risk in the community

    OpenAIRE

    Fisher, Stacey; Hsu, Amy; Mojaverian, Nassim; Taljaard, Monica; Huyer, Gregory; Manuel, Douglas G; Tanuseputro, Peter

    2017-01-01

    Introduction The burden of disease from dementia is a growing global concern as incidence increases dramatically with age, and average life expectancy has been increasing around the world. Planning for an ageing population requires reliable projections of dementia prevalence; however, existing population projections are simple and have poor predictive accuracy. The Dementia Population Risk Tool (DemPoRT) will predict incidence of dementia in the population setting using multivariable modellin...

  11. GIS-based debris flow source and runout susceptibility assessment from DEM data – a case study in NW Nicaragua

    Directory of Open Access Journals (Sweden)

    J. M. Vilaplana

    2007-11-01

    Full Text Available In October 1998, Hurricane Mitch triggered numerous landslides (mainly debris flows in Honduras and Nicaragua, resulting in a high death toll and in considerable damage to property. The potential application of relatively simple and affordable spatial prediction models for landslide hazard mapping in developing countries was studied. Our attention was focused on a region in NW Nicaragua, one of the most severely hit places during the Mitch event. A landslide map was obtained at 1:10 000 scale in a Geographic Information System (GIS environment from the interpretation of aerial photographs and detailed field work. In this map the terrain failure zones were distinguished from the areas within the reach of the mobilized materials. A Digital Elevation Model (DEM with 20 m×20 m of pixel size was also employed in the study area. A comparative analysis of the terrain failures caused by Hurricane Mitch and a selection of 4 terrain factors extracted from the DEM which, contributed to the terrain instability, was carried out. Land propensity to failure was determined with the aid of a bivariate analysis and GIS tools in a terrain failure susceptibility map. In order to estimate the areas that could be affected by the path or deposition of the mobilized materials, we considered the fact that under intense rainfall events debris flows tend to travel long distances following the maximum slope and merging with the drainage network. Using the TauDEM extension for ArcGIS software we generated automatically flow lines following the maximum slope in the DEM starting from the areas prone to failure in the terrain failure susceptibility map. The areas crossed by the flow lines from each terrain failure susceptibility class correspond to the runout susceptibility classes represented in a runout susceptibility map. The study of terrain failure and runout susceptibility enabled us to obtain a spatial prediction for landslides, which could contribute to landslide risk

  12. Uso de espectrometria de massas em medidas eletroquímicas - a técnica de DEMS

    Directory of Open Access Journals (Sweden)

    Souza José Pio I. de

    2000-01-01

    Full Text Available The combination of cyclic voltammetry and on line mass spectrometry, called differential electrochemical mass spectrometry (DEMS, is already a well established method for on line identification and quantitative detection of the products and intermediates of electrochemical reactions. This article aims to show the principles of the method and how this technique have been used to study electrochemical problems such the electrocatalytic oxidation of organic molecules, as methanol and ethanol, at noble metal electrodes.

  13. Precise Determination of the Baseline Between the TerraSAR-X and TanDEM-X Satellites

    Science.gov (United States)

    Koenig, Rolf; Rothacher, Markus; Michalak, Grzegorz; Moon, Yongjin

    TerraSAR-X, launched on June 15, 2007, and TanDEM-X, to be launched in September 2009, both carry the Tracking, Occultation and Ranging (TOR) category A payload instrument package. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), for precise orbit determination and atmospheric sounding and a Laser retro-reflector (LRR) serving as target for the global Satellite Laser Ranging (SLR) ground station network. The TOR is supplied by the GeoForschungsZentrum Potsdam (GFZ) Germany, and the Center for Space Research (CSR), Austin, Texas. The objective of the German/US collaboration is twofold: provision of atmospheric profiles for use in numerical weather predictions and climate studies from the occultation data and precision SAR data processing based on precise orbits and atmospheric products. For the scientific objectives of the TanDEM- X mission, i.e., bi-static SAR together with TerraSAR-X, the dual-frequency GPS receiver is of vital importance for the millimeter level determination of the baseline or distance between the two spacecrafts. The paper discusses the feasibility of generating millimeter baselines by the example of GRACE, where for validation the distance between the two GRACE satellites is directly available from the micrometer-level intersatellite link measurements. The distance of the GRACE satellites is some 200 km, the distance of the TerraSAR-X/TanDEM-X formation will be some 200 meters. Therefore the proposed approach is then subject to a simulation of the foreseen TerraSAR-X/TanDEM-X formation. The effect of varying space environmental conditions, of possible phase center variations, multi path, and of varying center of mass of the spacecrafts are evaluated and discussed.

  14. To the question on accuracy of forest heights’ measurements by the TanDEM-X radar interferometry data

    Directory of Open Access Journals (Sweden)

    T. N. Chimitdorzhiev

    2016-08-01

    Full Text Available The paper presents the validation results of the InSAR method for determining the forest canopy height, based on TanDEM-X and ALOS PALSAR data. The research conducted on the territory of the Baikal-Kudara forest area of the Republic of Buryatia (52°10'N, 106°48'E. Forest vegetation is represented mainly by conifers – pine, and spruce, with a small admixture of deciduous trees – aspen, birch, etc. The forest vegetation height was determined by subtracting the digital elevation model (DEM of the digital terrain model (DTM. DEM is built according to the L-band (wavelength of 23.5 cm ALOS PALSAR satellite with horizontal co-polarization mode. In the investigation it was assumed that a radar signal of ALOS PALSAR passes all forest thickness and reflected from the underlying surface, made it possible to recover terrain under forest canopy. DTM has been built using the TanDEM-X data (wavelength 3 cm. In this case, it was assumed that the radar echoes scattered from a some virtual phase centers of scattering surface, which characterizes the upper limit of the continuous forest canopy. To check the accuracy of satellite definitions of forest height in study area were made high-precision geodetic measurement of trees heights using electronic total station and the coordinates of geographic control points using differential GPS receivers. The discrepancy between the satellite and ground-based measurements at 11 test sites did not exceed 2 m, which is mainly due to the difference in measurement techniques: height of individual trees by ground methods and continuous forest canopy height using radar interferometry.

  15. Extraction of multi-scale landslide morphological features based on local Gi* using airborne LiDAR-derived DEM

    Science.gov (United States)

    Shi, Wenzhong; Deng, Susu; Xu, Wenbing

    2018-02-01

    For automatic landslide detection, landslide morphological features should be quantitatively expressed and extracted. High-resolution Digital Elevation Models (DEMs) derived from airborne Light Detection and Ranging (LiDAR) data allow fine-scale morphological features to be extracted, but noise in DEMs influences morphological feature extraction, and the multi-scale nature of landslide features should be considered. This paper proposes a method to extract landslide morphological features characterized by homogeneous spatial patterns. Both profile and tangential curvature are utilized to quantify land surface morphology, and a local Gi* statistic is calculated for each cell to identify significant patterns of clustering of similar morphometric values. The method was tested on both synthetic surfaces simulating natural terrain and airborne LiDAR data acquired over an area dominated by shallow debris slides and flows. The test results of the synthetic data indicate that the concave and convex morphologies of the simulated terrain features at different scales and distinctness could be recognized using the proposed method, even when random noise was added to the synthetic data. In the test area, cells with large local Gi* values were extracted at a specified significance level from the profile and the tangential curvature image generated from the LiDAR-derived 1-m DEM. The morphologies of landslide main scarps, source areas and trails were clearly indicated, and the morphological features were represented by clusters of extracted cells. A comparison with the morphological feature extraction method based on curvature thresholds proved the proposed method's robustness to DEM noise. When verified against a landslide inventory, the morphological features of almost all recent (historical (> 10 years) landslides were extracted. This finding indicates that the proposed method can facilitate landslide detection, although the cell clusters extracted from curvature images should

  16. La revista Demófilo y la antropología cultural en Andalucía

    Directory of Open Access Journals (Sweden)

    Rodríguez Becerra, Salvador

    2002-06-01

    Full Text Available Published since 1987 by the Machado Foundation, of Seville, Demófilo represents the resumption of scientific folklore studies in the late 19th century championed by Antonio Machado y Álvarez and published in the journal El Folk-lore Andaluz. The basic objectives of Demófilo are «to rescue, analyze and divulge Andalousia's traditional culture.» The journal is oriented toward high schools, colleges and universities in Andalousia as well as any institution interested in the traditional culture of the area, such as museums and organizations supporting Andalousia's cultural heritage. The authors also include in this article a summary of the journal's monographic issues published to date.

    Publicación de la Fundación Machado, de Sevilla, y nacida en 1987, Demófilo enlaza con su predecesora en el siglo XIX, El Folk-lore Andaluz, del movimiento sevillano de estudio científico del folklore que animara sobre todo Antonio Machado y Álvarez. Demófilo tiene como objetivos básicos «rescatar, analizar y difundir la cultura tradicional andaluza» y va dirigida especialmente a centros de enseñanza media y universidades de Andalucía, así como a instituciones interesadas en la cultura tradicional de la región, como museos y asociaciones de defensa del patrimonio cultural. Los autores incluyen también en este artículo un resumen de los números monográficos de la revista publicados hasta la fecha.

  17. Accuracy assessment of TanDEM-X IDEM using airborne LiDAR on the area of Poland

    Directory of Open Access Journals (Sweden)

    Woroszkiewicz Małgorzata

    2017-06-01

    Full Text Available The TerraSAR-X add-on for Digital Elevation Measurement (TanDEM-X mission launched in 2010 is another programme – after the Shuttle Radar Topography Mission (SRTM in 2000 – that uses space-borne radar interferometry to build a global digital surface model. This article presents the accuracy assessment of the TanDEM-X intermediate Digital Elevation Model (IDEM provided by the German Aerospace Center (DLR under the project “Accuracy assessment of a Digital Elevation Model based on TanDEM-X data” for the southwestern territory of Poland. The study area included: open terrain, urban terrain and forested terrain. Based on a set of 17,498 reference points acquired by airborne laser scanning, the mean errors of average heights and standard deviations were calculated for areas with a terrain slope below 2 degrees, between 2 and 6 degrees and above 6 degrees. The absolute accuracy of the IDEM data for the analysed area, expressed as a root mean square error (Total RMSE, was 0.77 m.

  18. 3D-Druck von Metallen als Substitution und Wettbewerb von Gussteilen?: Vortrag gehalten auf dem 26. Ledebur-Kolloquium, 27. und 28. Oktober 2016, Freiberg

    OpenAIRE

    Müller, Bernhard

    2016-01-01

    Das Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik IWU ist kompetenter Partner für anwendungsorientierte Forschung im Automobil- und Maschinenbau an den Standorten Chemnitz, Dresden, Zittau unter dem Leitthema „Ressourceneffiziente Produktion“. Die Kernkompetenzen des Instituts in der Werkzeugmaschinenentwicklung, der Umform- und Zerspanungstechnik, der Mechatronik, dem Funktionsleichtbau sowie der Systemtechnologie werden durch den Einsatz generativer Fertigungs-verfahren ergänz...

  19. Uma revisão bibliográfica das principais demências que acometem a população brasileira

    Directory of Open Access Journals (Sweden)

    Claudia Lysia de O. Araújo

    2011-01-01

    Full Text Available Demência pode ser definida como uma síndrome caracterizada pelo declínio progressivo e global de memória e outras funções cognitivas. O presente trabalho é uma revisão bibliográfica que tem como objetivo identificar e apresentar a produção científica relacionada com a temática. O levantamento bibliográfico foi nas Bases de Dados da Biblioteca Virtual de Saúde - BIREME. Os tipos de demência aqui levadas em conta são: Demência de Alzheimer, Demência por Corpos de Lewy (DCL, Demência Frontotemporal (DFT e Demência Vascular. Nas demências, os fatores de risco variam de acordo com os estressores genéticos e ambientais, além da idade e histórico clínico, conforme cada indivíduo. As principais alterações cerebrais são: placas senis e emaranhados neurofibrilares, com comprometimento da neurotransmissão colinérgica e atrofia cerebral extensa. Na sua maior parte são patologias de início insidioso e deterioração progressiva. O primeiro sinal/sintoma é a perda da memória seguida de declínio cognitivo e funcional. Podem ser divididas em estágios conforme o acometimento. O diagnóstico é realizado por meio de história clínica, exames laboratoriais e de neuroimagem, exame clínico neurológico e exames neuropsicológicos. Conclui-se que ainda não se tem a cura das demências e que os estudos de células-tronco podem contribuir nesse sentido.

  20. Ressourceneffiziente Produktion - Innovationsallianz Green Carbody Technologies: Vortrag gehalten auf dem 11. Cottbuser Leichtbauworkshop, Energie als Ressource, 28. und 29. Mai 2013, Cottbus

    OpenAIRE

    Putz, Matthias

    2013-01-01

    Produktionstechnik im Wandel, "Treiber" für Energie- und Ressourceneffizienz. Die Produktionstechnik muss sich den Herausforderungen Endlichkeit von fossilen Ressourcen, demografischer Wandel, Klimawandel, steigender Verbrauch an Elektrizität, Globalisierung und Wohlstand, unter dem Ansatz der Machbarkeit der Effizienz, stellen. Mit dem E3-Konzept -effiziente Produktionstechnik, emissionsneutrale, energieautarke Fabrik, Einbindung des Menschen- forscht die FHG an Lösungen für eine ressourcene...

  1. Linking flood peak, flood volume and inundation extent: a DEM-based approach

    Science.gov (United States)

    Rebolho, Cédric; Furusho-Percot, Carina; Blaquière, Simon; Brettschneider, Marco; Andréassian, Vazken

    2017-04-01

    Traditionally, flood inundation maps are computed based on the Shallow Water Equations (SWE) in one or two dimensions, with various simplifications that have proved to give good results. However, the complexity of the SWEs often requires a numerical resolution which can need long computing time, as well as detailed cross section data: this often results in restricting these models to rather small areas abundant with high quality data. This, along with the necessity for fast inundation mapping, are the reason why rapid inundation models are being designed, working for (almost) any river with a minimum amount of data and, above all, easily available data. Our model tries to follow this path by using a 100m DEM over France from which are extracted a drainage network and the associated drainage areas. It is based on two pre-existing methods: (1) SHYREG (Arnaud et al.,2013), a regionalized approach used to calculate the 2-year and 10-year flood quantiles (used as approximated bankfull flow and maximum discharge, respectively) for each river pixel of the DEM (below a 10 000 km2 drainage area) and (2) SOCOSE (Mailhol,1980), which gives, amongst other things, an empirical formula of a characteristic flood duration (for each pixel) based on catchment area, average precipitation and temperature. An overflow volume for each river pixel is extracted from a triangular shaped synthetic hydrograph designed with SHYREG quantiles and SOCOSE flood duration. The volume is then spread from downstream to upstream one river pixel at a time. When the entire hydrographic network is processed, the model stops and generates a map of potential inundation area associated with the 10-year flood quantile. Our model can also be calibrated using past-events inundation maps by adjusting two parameters, one which modifies the overflow duration, and the other, equivalent to a minimum drainage area for river pixels to be flooded. Thus, in calibration on a sample of 42 basins, the first draft of the

  2. Looking Through the Ice: Searching for Past and Present Habitable Zones in the Martian North Polar Region Using MOLA DEMs

    Science.gov (United States)

    Payne, M. C.; Farmer, J. D.

    2002-12-01

    Hydrothermal systems have been acknowledged as important gateways to accessing a potential subsurface biology (extant or extinct) on Mars. Groundwater circulation, sustained for up to one billion years by large plutonic bodies (as modeled by previous authors), might well be capable of tapping into a deep subsurface biosphere and subsequently carrying members of microbial communities to the surface. Hence, future robotic missions with near surface drilling capabilities may be able to unearth cryopreserved biosignatures, or perhaps extant organisms, in the midst of the hydrothermal system itself. Digital Elevation Models (DEMs) constructed from Mars Orbiter Laser Altimeter (MOLA) data have proved to be a valuable tool in the search for potential habitable zones for extant and extinct life, and the detection of possible hydrothermal systems on Mars. When formatted for use in a Geographical Information Systems (GIS) software package such as ESRI's ArcView, MOLA data can be used to compose DEMs. Those DEMs can, in turn, be used to create contour maps, to allow profiling through features of interest, and to generate hillshaded views, which provide an image-like perspective of a selected area. Furthermore, DEMs eliminate many problems associated with photographic images such as over-/underexposure, poor focus, and albedo values too high or low for optimal observations. During this study, DEMs were used in the analysis of several regions north of 70° N latitude, in the Martian north polar cap and polar cap margin. The regions were selected during a Viking image survey that concentrated on the location of surface expressions of potential magma-ice interactions, and hence past or present hydrothermal activity. Specific features sought included individual volcanoes and volcanic fields, as well as pseudocrater fields, subglacial volcanic constructs (such as tuyas and tindar ridges), fluvial channels and outwash plains (indicative of j”kulhlaup flooding events), possible

  3. Evaluation of the influence of source and spatial resolution of DEMs on derivative products used in landslide mapping

    Directory of Open Access Journals (Sweden)

    Rubini Mahalingam

    2016-11-01

    Full Text Available Landslides are a major geohazard, which result in significant human, infrastructure, and economic losses. Landslide susceptibility mapping can help communities plan and prepare for these damaging events. Digital elevation models (DEMs are one of the most important data-sets used in landslide hazard assessment. Despite their frequent use, limited research has been completed to date on how the DEM source and spatial resolution can influence the accuracy of the produced landslide susceptibility maps. The aim of this paper is to analyse the influence of spatial resolutions and source of DEMs on landslide susceptibility mapping. For this purpose, Advanced Spaceborne Thermal Emission and Reflection (ASTER, National Elevation Dataset (NED, and Light Detection and Ranging (LiDAR DEMs were obtained for two study sections of approximately 140 km2 in north-west Oregon. Each DEM was resampled to 10, 30, and 50 m and slope and aspect grids were derived for each resolution. A set of nine spatial databases was constructed using geoinformation science (GIS for each of the spatial resolution and source. Additional factors such as distance to river and fault maps were included. An analytical hierarchical process (AHP, fuzzy logic model, and likelihood ratio-AHP representing qualitative, quantitative, and hybrid landslide mapping techniques were used for generating landslide susceptibility maps. The results from each of the techniques were verified with the Cohen's kappa index, confusion matrix, and a validation index based on agreement with detailed landslide inventory maps. The spatial resolution of 10 m, derived from the LiDAR data-set showed higher predictive accuracy in all the three techniques used for producing landslide susceptibility maps. At a resolution of 10 m, the output maps based on NED and ASTER had higher misclassification compared to the LiDAR-based outputs. Further, the 30-m LiDAR output showed improved results over the 10-m NED and 10-m

  4. Investigation on the cohesive silt/clay-particle sediment via the coupled CFD-DEM simulations

    Science.gov (United States)

    Xu, S.; Sun, H.; Sun, R.

    2017-12-01

    Sedimentation of silt/clay particles happens ubiquitously in nature and engineering field. There have been abundant studies focusing on the settling velocity of the cohesive particles, while studies on the sediment deposited from silt/clay irregular particles, including the vertical concentration profile of sediment and the various forces among the deposited particles are still lacking. This paper aims to investigate the above topics by employing the CFD-DEM (Computational Fluid Dynamics-Discrete Element Method) simulations. In this work, we simulate the settling of the mono- and poly- dispersed silt/clay particles and mainly study the characteristics of the deposited cohesive sediment. We use the bonded particles to simulate the irregular silt/clay aggregates at the initial state and utilize the van der Waals force for all micro-particles to consider the cohesive force among silt/clay particles. The interparticle collision force and the fluid-particle interaction forces are also considered in our numerical model. The value of the mean structural density of cohesive sediment obtained from simulations is in good agreement with the previous research, and it is obviously smaller than no-cohesive sediment because of the existence of the silt/clay flocs. Moreover, the solid concentration of sediment increases with the growth of the depth. It is because the silt/clay flocs are more easily to break up due to the gradually increased submerged gravity of the deposited particles along the depth. We also obtain the noncontacted cohesive force and contact force profiles during the sedimentation and the self-weight consolidation process. The study of the concentration profile and the forces among silt/clay sediment will help to give an accurate initial condition for calculating the speed of the reconsolidation process by employing the artificial loads, which is necessary for practical designs of the land reclamation projects.

  5. Conversion analysis of a cylindrical biomass particle with a DEM-CFD coupling approach

    Directory of Open Access Journals (Sweden)

    Mohammad Mohseni

    2017-09-01

    Full Text Available Biomass as a renewable energy source has attracted more attention nowadays due to ecological and economical benefits. The main objective of this work is studying the biomass conversion with employing a DEM-CFD coupling approach. In this model, the solid particulates are considered as discrete elements coupled via heat, mass and momentum transfer to the surrounding gas as continuous phase. That is, a comprehensive three-dimensional numerical model is developed and applied to investigate the complex phenomena taking place during biomass conversion in a reactor. In this case, the physical and chemical processes as heat-up, drying, pyrolysis, gasification and combustion are taken into account based on the relevant homogeneous and heterogeneous reactions. This platform predicts the motion of discrete particles based on the newton's equations of motion; and the thermodynamic state of each particle is extended according to the related algorithms. The thermodynamic state estimates the temperature and species distributions inside the particle due to external heat sources and chemical reactions. The reaction rates are described with Arrhenius model, and the reactions in the gas phase are modeled using Partially Stirred Reactor (PaSR model with the standard k−ϵ turbulent model. The conductive and radiative heat transfer between particles as well as convective heat transfer between particles and gas phase are also observed. Due to layered behavior of biomass materials, the shape of particle is considered as cylindrical rather than spherical to predict more realistic results. In order to improve the numerical modeling of biomass conversion, a shrinkage model is also developed and validated with experimental data in literature.

  6. Erinnerungen. Aus dem Feldzuge der Franzosen in Russland unter Napoleon im Jahre 1812, von einem preußischen Bombardier, dem jetzigen Major Weinberger. Unveröffentlichtes Manuskript (1849), herausgegeben von Peter-Michael Berger

    OpenAIRE

    Weinberger, Friedrich Ludwig

    2012-01-01

    Friedrich Ludwig Weinberger (1794–1869) diente im Juni 1812 als Freiwilliger bei der Königsberger Garnisonsartillerie. Diese 400 Soldaten wurden von Napoleon in die Garde seiner Grande Armée zur Invasion Russlands zwangsweise eingegliedert. Als einer von nur 13 Überlebenden seiner Truppe kehrte Weinberger im März 1813 aus russischem Gewahrsam zurück. Über seine Erlebnisse beim Vormarsch, den Kämpfen, der Besetzung Moskaus, dem Rückzug und der Heimkehr verfasste er einen Bericht, den er m...

  7. Electrocatalysis and kinetics of the direct alcohol fuel cells. DEMS and ac voltammetry studies

    Energy Technology Data Exchange (ETDEWEB)

    Othman Mostafa, Ehab Mostafa

    2013-01-11

    For the direct methanol fuel cell (DMFC) operating at low temperature, the main problem that arises at the anode is its poisoning (deactivation) due to the accumulation of the fuel adsorption product (CO{sub ad}) which can only be oxidized at high potentials (> 0.7 V). For low temperature direct ethanol fuel cells (DEFCs), the main problem that arises at the anode, beside its poisoning by ethanol adsorption products (CO{sub ad} and CH{sub x,ad}), is the incomplete ethanol oxidation due to the difficulty of (C-C) bond breaking. In the previous types of fuel cells, a sluggish oxygen reduction reaction (ORR) kinetics was observed at the cathode which results in a large voltage drop. Such behavior is due to strong inhibition of the cathodic ORR, resulting in high overpotentials and therefore, significant deterioration in the energy conversion efficiency of the cell. The slow kinetic behavior stems from the difficulty of (O=O) bond breaking. In order to model the conditions of continuous oxidation/reduction in a fuel cell, the continuous mass transfer to the electrode surface is necessary. Therefore, mass spectrometry and AC voltammetry measurements presented here were done using the thin layer flow through cell. This thesis aims at a determination of the rate constant of single reaction steps during the oxidation of CO, methanol and ethanol at different platinum surfaces. Towards that aim, I investigated the electrocatalytic oxidation and adsorption rate of methanol (chapter 3) and the electrocatalytic oxidation of ethanol (chapter 4) at different Pt surfaces, using DEMS. In chapter 5, the potential dependence of the bulk and adsorbed methanol oxidation reaction rate (presented by the apparent transfer coefficient, {alpha}') and the corresponding Tafel slope of the reaction have been determined under convection conditions using a potential modulation ac voltammetry technique. Finally, as an application of the method presented in chapter 5, my work in chapter 6

  8. Calculation Methods of Topographic Factors Modification Using Data Digital Elevation Model (DEM To Predict Erosion

    Directory of Open Access Journals (Sweden)

    Hengki Simanjuntak

    2018-03-01

    Full Text Available Erosion  is a crucial information for sustainable management of land resources within a particular watershed. The information of erosion is needed for land resource management planning, and is generally counted by USLE (Universal Soil Loss Equation. One of the parameters in USLE is topographic factor (LS. The determinations of LS in erosion estimation model are vary, both in terms of LS factor equation, as well as in terms of the length of the slope (λ and slope (s measurements. There are at least 3 methods used to calculate slope factors in spatial operation, i.e (1 Input of the LS Value from Table (INT, (2 Flow accumulation, and (3 Cell Size. The study was designed to obtain a method of calculation that gives the smallest topographic factor and in order to obtain a LS factors that similar to the slope information. Research location in Kampa Sub watershed, The LS determination in Kampa Sub watershed basically are with (INT and without calculating λ and s. INT method is determination without calculating λ and s, LS value is generate from the contour map and DEM SRTM by giving LS value from table reference of LS value. The Flow Accumulation and Cell Size are determination of LS Value by calculating λ and s. The Flow Accumulation method modifies the determination of λ and s using the middle value of s, λ per land use, and λ and s per cell. Cell Size method determines λ using the amount of cell size. The results showed that the “cell size” and "INT" methods were the best method for topographic factor (LS calculation, because LS value of “cell size” and "INT" methods are smaller than the flow accumulation method and the LS value similar to the slope information. LS value from that methods generated weighted value in average of 0,55−0,58. Keywords: cell size, flow accumulation, flow direction, the length of the slope, USLE

  9. Parallelizing flow-accumulation calculations on graphics processing units—From iterative DEM preprocessing algorithm to recursive multiple-flow-direction algorithm

    Science.gov (United States)

    Qin, Cheng-Zhi; Zhan, Lijun

    2012-06-01

    As one of the important tasks in digital terrain analysis, the calculation of flow accumulations from gridded digital elevation models (DEMs) usually involves two steps in a real application: (1) using an iterative DEM preprocessing algorithm to remove the depressions and flat areas commonly contained in real DEMs, and (2) using a recursive flow-direction algorithm to calculate the flow accumulation for every cell in the DEM. Because both algorithms are computationally intensive, quick calculation of the flow accumulations from a DEM (especially for a large area) presents a practical challenge to personal computer (PC) users. In recent years, rapid increases in hardware capacity of the graphics processing units (GPUs) provided in modern PCs have made it possible to meet this challenge in a PC environment. Parallel computing on GPUs using a compute-unified-device-architecture (CUDA) programming model has been explored to speed up the execution of the single-flow-direction algorithm (SFD). However, the parallel implementation on a GPU of the multiple-flow-direction (MFD) algorithm, which generally performs better than the SFD algorithm, has not been reported. Moreover, GPU-based parallelization of the DEM preprocessing step in the flow-accumulation calculations has not been addressed. This paper proposes a parallel approach to calculate flow accumulations (including both iterative DEM preprocessing and a recursive MFD algorithm) on a CUDA-compatible GPU. For the parallelization of an MFD algorithm (MFD-md), two different parallelization strategies using a GPU are explored. The first parallelization strategy, which has been used in the existing parallel SFD algorithm on GPU, has the problem of computing redundancy. Therefore, we designed a parallelization strategy based on graph theory. The application results show that the proposed parallel approach to calculate flow accumulations on a GPU performs much faster than either sequential algorithms or other parallel GPU

  10. An Improved dem Construction Method for Mudflats Based on BJ-1 Small Satellite Images: a Case Study on Bohai Bay

    Science.gov (United States)

    Wu, D.; Du, Y.; Su, F.; Huang, W.; Zhang, L.

    2018-04-01

    The topographic measurement of muddy tidal flat is restricted by the difficulty of access to the complex, wide-range and dynamic tidal conditions. Then the waterline detection method (WDM) has the potential to investigate the morph-dynamics quantitatively by utilizing large archives of satellite images. The study explores the potential for using WDM with BJ-1 small satellite images to construct a digital elevation model (DEM) of a wide and grading mudflat. Three major conclusions of the study are as follows: (1) A new intelligent correlating model of waterline detection considering different tidal stages and local geographic conditions was explored. With this correlative algorithm waterline detection model, a series of waterlines were extracted from multi-temporal remotely sensing images collected over the period of a year. The model proved to detect waterlines more efficiently and exactly. (2) The spatial structure of elevation superimposing on the points of waterlines was firstly constructed and a more accurate hydrodynamic ocean tide grid model was used. By the newly constructed abnormal hydrology evaluation model, a more reasonable and reliable set of waterline points was acquired to construct a smoother TIN and GRID DEM. (3) DEM maps of Bohai Bay, with a spatial resolution of about 30 m and height accuracy of about 0.35 m considering LiDAR and 0.19 m considering RTK surveying were constructed over an area of about 266 km2. Results show that remote sensing research in extremely turbid estuaries and tidal areas is possible and is an effective tool for monitoring the tidal flats.

  11. Investigation of effective thermal conductivity for pebble beds by one-way coupled CFD-DEM method for CFETR WCCB

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China); Chen, Youhua [University of Science and Technology of China, Hefei, Anhui 230027 (China); Huang, Kai [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); University of Science and Technology of China, Hefei, Anhui 230027 (China)

    2016-05-15

    Highlights: • A CFD-DEM coupled numerical model is built based on the prototypical blanket pebble bed. • The numerical model can be applied to simulate heat transfer of a pebble bed and estimate effective thermal conductivity. • The numerical model agrees well with the theoretical SZB model. • Effective thermal conductivity of pebble beds for WCCB is estimated by the current model. - Abstract: The mono-sized beryllium pebble bed and the multi-sized Li{sub 2}TiO{sub 3}/Be{sub 12}Ti mixed pebble bed are the main schemes for the Water-cooled ceramic breeder blanket (WCCB) of China Fusion Engineering Test Reactor (CFETR). And the effective thermal conductivity (k{sub eff}) of the pebble beds is important to characterize the thermal performance of WCCB. In this study, a one-way coupled CFD-DEM method was employed to simulate heat transfer and estimate k{sub eff}. The geometric topology of a prototypical blanket pebble bed was produced by the discrete element method (DEM). Based on the geometric topology, the temperature distribution and the k{sub eff} were obtained by the computational fluid dynamics (CFD) analysis. The current numerical model presented a good performance to calculate k{sub eff} of the beryllium pebble bed, and according to the modeling of the Li{sub 2}TiO{sub 3}/Be{sub 12}Ti mixed pebble bed, k{sub eff} was estimated with values ranged between 2.0 and 4.0 W/(m∙K).

  12. DEM ASSESSMENT DERIVED FROM CLOSE RANGE PHOTOGRAMMETRY: A CASE STUDY FROM KADAVUR AREA, KARUR DISTRICT, TAMIL NADU, INDIA

    Directory of Open Access Journals (Sweden)

    S. Anbarasan

    2012-07-01

    Full Text Available Close-Range Photogrammetry is an accurate, cost effective technique of collecting measurements of real world objects and conditions, directly from photographs. Photogrammetry utilizes digital images to obtain accurate measurements and geometric data of the object or area of interest, in order to provide spatial information for Engineering design, spatial surveys or 3D modeling. The benefits of close-range Photogrammetry over other field procedures are purported to be: Increased accuracy; complete as-built information; reduced costs; reduced on-site time; and effective for small and large projects. The same basic principle of traditional Aerial Photogrammetry can be applied to stereoscopic pictures taken from lower altitudes or from the ground. Terrestrial, ground-based, and close-range are all descriptive terms that refer to photos taken with an object-to-camera distance less than 300m (1000 feet. (Matthews, N.A, 2008. Close range Photogrammetry is a technique for obtaining the geometric information (e.g. position, distance, size and shape of any object in 3D space that was imaged on the two dimensional (2D photos, (Wolf, P.R, et.al, 2000 DEM Generation requires many processing and computation, such as camera calibration, stereo matching, editing, and interpolation. All the mentioned steps contribute to the quality of DEM. Image on close range Photogrammetry can be captured using three kind of camera: metric camera, semi-metric camera, and non-metric camera (Hanke, K., et.al, 2002. In this paper DEM quality assessed at Kadavur area, Karur district, Tamil Naudu, India using Close Range Photogrammetry technique, Commercial Digital Camera and Leica Photogrammetry Suite.

  13. Characterization of surface defects in high strength galvannealed steels; Charakterisierung der Oberflaechendefekte in hochfesten, nach dem Verzinken waermebehandelten Staehlen

    Energy Technology Data Exchange (ETDEWEB)

    Hong, M.H. [Automotive Steels Research Center, Technical Research Labs., POSCO, Gwangyang (Korea)

    2004-03-01

    Hot-dip galvannealed steel sheets, in which Fe of the substrate steel diffused into upper coating layer so as to be alloyed with Zn through a galvannealing above 450 C followed by hot-dip galvanizing process, generally show superior corrosion resistance, weldability and paintability. They have been widely used in automobile, construction, appliance industries and others. In particular, many researches have been carrying out to produce defect-free coating for an exposed automotive body panel. In the present study, high strength interstitial-free steel sheets containing Mn and P were galvannealed in an industrial continuous galvanizing line and defects on the coating surface were investigated by optical microscopy, scanning electron microscopy and transmission electron microscopy. It is clear that the quality of the substrate strongly affects galvannealed coating and it is essential to keep clean surface just before immediately dipping into molten Zn pot. (orig.) [German] Feuerverzinkte und danach waermebehandelte Stahlbleche, wo Fe aus dem Substratstahl in die obere Beschichtungsschicht diffundiert wie bei Legieren mit Zn und einer Waermebehandlung von ueber 450 C, gefolgt von einem Feuerverzinkverfahren, zeigen im Allgemeinen hervorragende Korrosionsbestaendigkeit, Schweissbarkeit und Anstreichbarkeit. Sie finden ein breites Einsatzgebiet bei Automobilen, im Bauwesen, in Werkzeugindustrien und anderen. Insbesondere wurde von vielen Forschern versucht, eine fehlerfreie Beschichtung fuer ein ungeschuetztes Karosserieteil herzustellen. In der vorliegenden Arbeit wurden hochfeste porenfreie Stahlbleche mit Mn- und P-Gehalt nach dem Verzinken in einer industriellen Endlos-Verzinkungslinie (CGL) waermebehandelt, wobei die Defekte auf der Schichtoberflaeche lichtmikroskopisch, rasterund transmissionselektronenmikroskopisch untersucht wurden. Klar ist, dass die Qualitaet des Substrats die nach dem Verzinken waermebehandelten Schichten beeinflusst und es ist von grosser

  14. Recent glacier mass balance and area changes in the Kangri Karpo Mountains from DEMs and glacier inventories

    Directory of Open Access Journals (Sweden)

    K. Wu

    2018-01-01

    Full Text Available Due to the influence of the Indian monsoon, the Kangri Karpo Mountains in the south-east of the Tibetan Plateau is in the most humid and one of the most important and concentrated regions containing maritime (temperate glaciers. Glacier mass loss in the Kangri Karpo is an important contributor to global mean sea level rise, and changes run-off distribution, increasing the risk of glacial-lake outburst floods (GLOFs. Because of its inaccessibility and high labour costs, information about the Kangri Karpo glaciers is still limited. Using geodetic methods based on digital elevation models (DEMs derived from 1980 topographic maps from the Shuttle Radar Topography Mission (SRTM (2000 and from TerraSAR-X/TanDEM-X (2014, this study has determined glacier elevation changes. Glacier area and length changes between 1980 and 2015 were derived from topographical maps and Landsat TM/ETM+/OLI images. Results show that the Kangri Karpo contained 1166 glaciers with an area of 2048.50 ± 48.65 km2 in 2015. Ice cover diminished by 679.51 ± 59.49 km2 (24.9 ± 2.2 % or 0.71 ± 0.06 % a−1 from 1980 to 2015, although nine glaciers advanced. A glacierized area of 788.28 km2, derived from DEM differencing, experienced a mean mass loss of 0.46 ± 0.08 m w.e. a−1 from 1980 to 2014. Shrinkage and mass loss accelerated significantly from 2000 to 2015 compared to 1980–2000, consistent with a warming climate.

  15. Recent glacier mass balance and area changes in the Kangri Karpo Mountains from DEMs and glacier inventories

    Science.gov (United States)

    Wu, Kunpeng; Liu, Shiyin; Jiang, Zongli; Xu, Junli; Wei, Junfeng; Guo, Wanqin

    2018-01-01

    Due to the influence of the Indian monsoon, the Kangri Karpo Mountains in the south-east of the Tibetan Plateau is in the most humid and one of the most important and concentrated regions containing maritime (temperate) glaciers. Glacier mass loss in the Kangri Karpo is an important contributor to global mean sea level rise, and changes run-off distribution, increasing the risk of glacial-lake outburst floods (GLOFs). Because of its inaccessibility and high labour costs, information about the Kangri Karpo glaciers is still limited. Using geodetic methods based on digital elevation models (DEMs) derived from 1980 topographic maps from the Shuttle Radar Topography Mission (SRTM) (2000) and from TerraSAR-X/TanDEM-X (2014), this study has determined glacier elevation changes. Glacier area and length changes between 1980 and 2015 were derived from topographical maps and Landsat TM/ETM+/OLI images. Results show that the Kangri Karpo contained 1166 glaciers with an area of 2048.50 ± 48.65 km2 in 2015. Ice cover diminished by 679.51 ± 59.49 km2 (24.9 ± 2.2 %) or 0.71 ± 0.06 % a-1 from 1980 to 2015, although nine glaciers advanced. A glacierized area of 788.28 km2, derived from DEM differencing, experienced a mean mass loss of 0.46 ± 0.08 m w.e. a-1 from 1980 to 2014. Shrinkage and mass loss accelerated significantly from 2000 to 2015 compared to 1980-2000, consistent with a warming climate.

  16. Extraction of Terraces on the Loess Plateau from High-Resolution DEMs and Imagery Utilizing Object-Based Image Analysis

    Directory of Open Access Journals (Sweden)

    Hanqing Zhao

    2017-05-01

    Full Text Available Abstract: Terraces are typical artificial landforms on the Loess Plateau, with ecological functions in water and soil conservation, agricultural production, and biodiversity. Recording the spatial distribution of terraces is the basis of monitoring their extent and understanding their ecological effects. The current terrace extraction method mainly relies on high-resolution imagery, but its accuracy is limited due to vegetation coverage distorting the features of terraces in imagery. High-resolution topographic data reflecting the morphology of true terrace surfaces are needed. Terraces extraction on the Loess Plateau is challenging because of the complex terrain and diverse vegetation after the implementation of “vegetation recovery”. This study presents an automatic method of extracting terraces based on 1 m resolution digital elevation models (DEMs and 0.3 m resolution Worldview-3 imagery as auxiliary information used for object-based image analysis (OBIA. A multi-resolution segmentation method was used where slope, positive and negative terrain index (PN, accumulative curvature slope (AC, and slope of slope (SOS were determined as input layers for image segmentation by correlation analysis and Sheffield entropy method. The main classification features based on DEMs were chosen from the terrain features derived from terrain factors and texture features by gray-level co-occurrence matrix (GLCM analysis; subsequently, these features were determined by the importance analysis on classification and regression tree (CART analysis. Extraction rules based on DEMs were generated from the classification features with a total classification accuracy of 89.96%. The red band and near-infrared band of images were used to exclude construction land, which is easily confused with small-size terraces. As a result, the total classification accuracy was increased to 94%. The proposed method ensures comprehensive consideration of terrain, texture, shape, and

  17. Sensitivity of drainage morphometry based hydrological response (GIUH) of a river basin to the spatial resolution of DEM data

    Science.gov (United States)

    Sahoo, Ramendra; Jain, Vikrant

    2018-02-01

    Drainage network pattern and its associated morphometric ratios are some of the important plan form attributes of a drainage basin. Extraction of these attributes for any basin is usually done by spatial analysis of the elevation data of that basin. These planform attributes are further used as input data for studying numerous process-response interactions inside the physical premise of the basin. One of the important uses of the morphometric ratios is its usage in the derivation of hydrologic response of a basin using GIUH concept. Hence, accuracy of the basin hydrological response to any storm event depends upon the accuracy with which, the morphometric ratios can be estimated. This in turn, is affected by the spatial resolution of the source data, i.e. the digital elevation model (DEM). We have estimated the sensitivity of the morphometric ratios and the GIUH derived hydrograph parameters, to the resolution of source data using a 30 meter and a 90 meter DEM. The analysis has been carried out for 50 drainage basins in a mountainous catchment. A simple and comprehensive algorithm has been developed for estimation of the morphometric indices from a stream network. We have calculated all the morphometric parameters and the hydrograph parameters for each of these basins extracted from two different DEMs, with different spatial resolutions. Paired t-test and Sign test were used for the comparison. Our results didn't show any statistically significant difference among any of the parameters calculated from the two source data. Along with the comparative study, a first-hand empirical analysis about the frequency distribution of the morphometric and hydrologic response parameters has also been communicated. Further, a comparison with other hydrological models suggests that plan form morphometry based GIUH model is more consistent with resolution variability in comparison to topographic based hydrological model.

  18. Is it possible to prevent dementia? É possível prevenir o desenvolvimento da demência?

    Directory of Open Access Journals (Sweden)

    Nicola T Lautenschlager

    2002-04-01

    Full Text Available It is a robust trend that the World's population is growing older. The proportion of elderly compared to other age groups and especially the number of oldest old, above age 85 years, is steadily increasing. One of the most common disorders in later life is dementia, the major cause of functional disability and the need for long-term care. This has prompted intensive research towards identifying risk factors associated with dementia. For current therapeutic intervention of incipient dementia and future prevention trials it is important to identify subjects at high risk of developing dementia. This article reviews clinical and biological findings of the quest to identify pre-dementia in subjects with mild cognitive impairment. It gives an overview of the present knowledge in this area and discusses strategies that may be useful in delaying the onset of dementia.A população mundial está envelhecendo. A proporção de idosos cresce de forma constante quando comparada a outras faixas etárias, particularmente para o grupo com 85 ou mais anos de idade. Um dos problemas de saúde mais freqüentes em fases tardias da vida é a demência, uma das principais causas de perda da capacidade funcional em idosos que, com freqüência, requer assistência com cuidados básicos em longo prazo. Como conseqüência, várias pesquisas têm procurado estabelecer os fatores que aumentam o risco de demência. Do ponto de vista terapêutico, é importante ser capaz de identificar de forma confiável indivíduos com alto risco de desenvolver demência, já que esses pacientes seriam o principal alvo de intervenções clínicas desenhadas com o objetivo de preveni-la. Este artigo tem o objetivo de rever os principais achados clínicos e biológicos das pesquisas que tiveram como objetivo identificar "pré-demência" em pessoas com "comprometimento cognitivo leve". O artigo oferece uma visão panorâmica do conhecimento atual nessa área e discute estratégias que

  19. Efectivitat de la hipoteràpia en persones amb demència tipus Alzheimer de fase lleu.

    OpenAIRE

    Beà Muro, Laura

    2015-01-01

    La hipoteràpia és més efectiva que un programa convencional d’estimulació cognitiva en el tractament de pacients amb demència tipus Alzheimer de fase lleu no institucionalitzats? En l’actualitat, no existeix cap tractament que detingui l'avanç de la malaltia d'Alzheimer (MA). Les teràpies farmacològiques en persones que pateixen la MA en estadi lleu i moderat es complementen cada vegada amb major freqüència amb tractaments no farmacològics. L'objectiu és el de minimitzar l'impacte neurodeg...

  20. Can DEM time series produced by UAV be used to quantify diffuse erosion in an agricultural watershed?

    Science.gov (United States)

    Pineux, N.; Lisein, J.; Swerts, G.; Bielders, C. L.; Lejeune, P.; Colinet, G.; Degré, A.

    2017-03-01

    Erosion and deposition modelling should rely on field data. Currently these data are seldom available at large spatial scales and/or at high spatial resolution. In addition, conventional erosion monitoring approaches are labour intensive and costly. This calls for the development of new approaches for field erosion data acquisition. As a result of rapid technological developments and low cost, unmanned aerial vehicles (UAV) have recently become an attractive means of generating high resolution digital elevation models (DEMs). The use of UAV to observe and quantify gully erosion is now widely established. However, in some agro-pedological contexts, soil erosion results from multiple processes, including sheet and rill erosion, tillage erosion and erosion due to harvest of root crops. These diffuse erosion processes often represent a particular challenge because of the limited elevation changes they induce. In this study, we propose to assess the reliability and development perspectives of UAV to locate and quantify erosion and deposition in a context of an agricultural watershed with silt loam soils and a smooth relief. Erosion and deposition rates derived from high resolution DEM time series are compared to field measurements. The UAV technique demonstrates a high level of flexibility and can be used, for instance, after a major erosive event. It delivers a very high resolution DEM (pixel size: 6 cm) which allows us to compute high resolution runoff pathways. This could enable us to precisely locate runoff management practices such as fascines. Furthermore, the DEMs can be used diachronically to extract elevation differences before and after a strongly erosive rainfall and be validated by field measurements. While the analysis for this study was carried out over 2 years, we observed a tendency along the slope from erosion to deposition. Erosion and deposition patterns detected at the watershed scale are also promising. Nevertheless, further development in the

  1. Kinetic parameters of grinding media in ball mills with various liner design and mill speed based on DEM modeling

    Science.gov (United States)

    Khakhalev, P. A.; Bogdanov, VS; Kovshechenko, V. M.

    2018-03-01

    The article presents analysis of the experiments in the ball mill of 0.5x0.3 m with four different liner types based on DEM modeling. The numerical experiment always complements laboratory research and allow obtaining high accuracy output data. An important property of the numerical experiment is the possibility of visualization of the results. The EDEM software allows calculating trajectory of the grinding bodies and kinetic parameters of each ball for the relative mill speed and the different types of mill’s liners.

  2. External Validation of the ASTER GDEM2, GMTED2010 and CGIAR-CSI- SRTM v4.1 Free Access Digital Elevation Models (DEMs in Tunisia and Algeria

    Directory of Open Access Journals (Sweden)

    Djamel Athmania

    2014-05-01

    Full Text Available Digital Elevation Models (DEMs including Advanced Spaceborne Thermal Emission and Reflection Radiometer-Global Digital Elevation Model (ASTER GDEM, Shuttle Radar Topography Mission (SRTM, and Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010 are freely available for nearly the entire earth’s surface. DEMs that are usually subject to errors need to be evaluated using reference elevation data of higher accuracy. This work was performed to assess the vertical accuracy of the ASTER GDEM version 2, (ASTER GDEM2, the Consultative Group on International Agriculture Research-Consortium for Spatial Information (CGIAR-CSI SRTM version 4.1 (SRTM v4.1 and the systematic subsample GMTED2010, at their original spatial resolution, using Global Navigation Satellite Systems (GNSS validation points. Two test sites, the Anaguid Saharan platform in southern Tunisia and the Tebessa basin in north eastern Algeria, were chosen for accuracy assessment of the above mentioned DEMs, based on geostatistical and statistical measurements. Within the geostatistical approach, empirical variograms of each DEM were compared with those of the GPS validation points. Statistical measures were computed from the elevation differences between the DEM pixel value and the corresponding GPS point. For each DEM, a Root Mean Square Error (RMSE was determined for model validation. In addition, statistical tools such as frequency histograms and Q-Q plots were used to evaluate error distributions in each DEM. The results indicate that the vertical accuracy of SRTM model is much higher than ASTER GDEM2 and GMTED2010 for both sites. In Anaguid test site, the vertical accuracy of SRTM is estimated 3.6 m (in terms of RMSE 5.3 m and 4.5 m for the ASTERGDEM2 and GMTED2010 DEMs, respectively. In Tebessa test site, the overall vertical accuracy shows a RMSE of 9.8 m, 8.3 m and 9.6 m for ASTER GDEM 2, SRTM and GMTED2010 DEM, respectively. This work is the first study to report the

  3. SveDem, the Swedish Dementia Registry - a tool for improving the quality of diagnostics, treatment and care of dementia patients in clinical practice.

    Directory of Open Access Journals (Sweden)

    Dorota Religa

    Full Text Available The Swedish Dementia Registry (SveDem was developed with the aim to improve the quality of diagnostic work-up, treatment and care of patients with dementia disorders in Sweden.SveDem is an internet based quality registry where several indicators can be followed over time. It includes information about the diagnostic work-up, medical treatment and community support (www.svedem.se. The patients are diagnosed and followed-up yearly in specialist units, primary care centres or in nursing homes.The database was initiated in May 2007 and covers almost all of Sweden. There were 28 722 patients registered with a mean age of 79.3 years during 2007-2012. Each participating unit obtains continuous online statistics from its own registrations and they can be compared with regional and national data. A report from SveDem is published yearly to inform medical and care professionals as well as political and administrative decision-makers about the current quality of diagnostics, treatment and care of patients with dementia disorders in Sweden.SveDem provides knowledge about current dementia care in Sweden and serves as a framework for ensuring the quality of diagnostics, treatment and care across the country. It also reflects changes in quality dementia care over time. Data from SveDem can be used to further develop the national guidelines for dementia and to generate new research hypotheses.

  4. DEM-based Approaches for the Identification of Flood Prone Areas

    Science.gov (United States)

    Samela, Caterina; Manfreda, Salvatore; Nardi, Fernando; Grimaldi, Salvatore; Roth, Giorgio; Sole, Aurelia

    2013-04-01

    The remarkable number of inundations that caused, in the last decades, thousands of deaths and huge economic losses, testifies the extreme vulnerability of many Countries to the flood hazard. As a matter of fact, human activities are often developed in the floodplains, creating conditions of extremely high risk. Terrain morphology plays an important role in understanding, modelling and analyzing the hydraulic behaviour of flood waves. Research during the last 10 years has shown that the delineation of flood prone areas can be carried out using fast methods that relay on basin geomorphologic features. In fact, the availability of new technologies to measure surface elevation (e.g., GPS, SAR, SAR interferometry, RADAR and LASER altimetry) has given a strong impulse to the development of Digital Elevation Models (DEMs) based approaches. The identification of the dominant topographic controls on the flood inundation process is a critical research question that we try to tackle with a comparative analysis of several techniques. We reviewed four different approaches for the morphological characterization of a river basin with the aim to provide a description of their performances and to identify their range of applicability. In particular, we explored the potential of the following tools. 1) The hydrogeomorphic method proposed by Nardi et al. (2006) which defines the flood prone areas according to the water level in the river network through the hydrogeomorphic theory. 2) The linear binary classifier proposed by Degiorgis et al. (2012) which allows distinguishing flood-prone areas using two features related to the location of the site under exam with respect to the nearest hazard source. The two features, proposed in the study, are the length of the path that hydrologically connects the location under exam to the nearest element of the drainage network and the difference in elevation between the cell under exam and the final point of the same path. 3) The method by

  5. Accurate Determination of Glacier Surface Velocity Fields with a DEM-Assisted Pixel-Tracking Technique from SAR Imagery

    Directory of Open Access Journals (Sweden)

    Shiyong Yan

    2015-08-01

    Full Text Available We obtained accurate, detailed motion distribution of glaciers in Central Asia by applying digital elevation model (DEM assisted pixel-tracking method to L-band synthetic aperture radar imagery. The paper firstly introduces and analyzes each component of the offset field briefly, and then describes the method used to efficiently and precisely compensate the topography-related offset caused by the large spatial baseline and rugged terrain with the help of DEM. The results indicate that the rugged topography not only forms the complex shapes of glaciers, but also affects the glacier velocity estimation, especially with large spatial baseline. The maximum velocity, 0.85 m∙d−1, was observed in the middle part on the Fedchenko Glacier, which is the world’s longest mountain glacier. The motion fluctuation on its main trunk is apparently influenced by mass flowing in from tributaries, as well as angles between tributaries and the main stream. The approach presented in this paper was proved to be highly appropriate for monitoring glacier motion and will provide valuable sensitive indicators of current and future climate change for environmental analysis.

  6. A method to assess collision hazard of falling rock due to slope collapse application of DEM on modeling of earthquake triggered slope failure for nuclear power plants

    International Nuclear Information System (INIS)

    Nakase, Hitoshi; Cao, Guoqiang; Tabei, Kazuto; Tochigi, Hitoshi; Matsushima, Takashi

    2015-01-01

    Risk evaluation of slope failure against nuclear power plants, which is induced by unexpectedly large earthquakes, has been urgent need for disaster prevention measures. Specially, for risk evaluation of slope failure, understanding of information such as traveling distances, collision velocities, and collision energies is very important. Discrete Element Method (DEM) such as particle simulation method contributes important role on predicting the detailed behavior of slope failure physics. In this study, instead of accurately predicting the complicated behavior of sliding and falling for each rock, we introduce the DEM modeling to evaluate the average traveling distance of collapsed rocks and its statistical variability. First, we conduct the validation test of the proposed DEM model on the basis of reconstruction of experiment results. Next, we conducted the parametric studies to examine sensitivities of important parameters. Finally, validity of the proposed method is evaluated and its applicability and technical assignments are also discussed. (author)

  7. High-resolution DEMs for High-mountain Asia: A systematic, region-wide assessment of geodetic glacier mass balance and dynamics

    Science.gov (United States)

    Shean, D. E.; Arendt, A. A.; Osmanoglu, B.; Montesano, P.

    2017-12-01

    High Mountain Asia (HMA) constitutes the largest glacierized region outside of the Earth's polar regions. Although available observations are limited, long-term records indicate sustained regional glacier mass loss since 1850, with increased loss in recent decades. Recent satellite data (e.g., GRACE, ICESat-1) show spatially variable glacier mass balance, with significant mass loss in the Himalaya and Hindu Kush and slight mass gain in the Karakoram. We generated 4000 high-resolution digital elevation models (DEMs) from sub-meter commercial stereo imagery (DigitalGlobe WorldView/GeoEye) acquired over glaciers in High-mountain Asia from 2002-present (mostly 2013-present). We produced a regional 8-m DEM mosaic for 2015 and estimated 15-year geodetic mass balance for 40000 glaciers larger than 0.1 km2. We are combining with other regional DEM sources to systematically document the spatiotemporal evolution of glacier mass balance for the entire HMA region. We also generated monthly to interannual DEM and velocity time series for high-priority sites distributed across the region, with >15-20 DEMs available for some locations from 2010-present. These records document glacier dynamics, seasonal snow accumulation/redistribution, and processes that affect glacier mass balance (e.g., ice-cliff retreat, debris cover evolution). These efforts will provide basin-scale assessments of snow/ice melt runoff contributions for model cal/val and downstream water resources applications. We will continue processing all archived and newly available commercial stereo imagery for HMA, and will release all DEMs through the HiMAT DAAC.

  8. Classical technical analysis of Latin American market indices. Correlations in Latin American Currencies (ARS, CLP, MXP) exchange rates with respect to DEM, GBP, JPY and USD

    Science.gov (United States)

    Ausloos, M.; Ivanova, K.

    2004-06-01

    The classical technical analysis methods of financial time series based on the moving average and momentum is recalled. Illustrations use the IBM share price and Latin American (Argentinian MerVal, Brazilian Bovespa and Mexican IPC) market indices. We have also searched for scaling ranges and exponents in exchange rates between Latin American currencies ($ARS$, $CLP$, $MXP$) and other major currencies $DEM$, $GBP$, $JPY$, $USD$, and $SDR$s. We have sorted out correlations and anticorrelations of such exchange rates with respect to $DEM$, $GBP$, $JPY$ and $USD$. They indicate a very complex or speculative behavior.

  9. High Resolution Airborne InSAR DEM of Bagley Ice Valley, South-central Alaska: Geodetic Validation with Airborne Laser Altimeter Data

    Science.gov (United States)

    Muskett, R. R.; Lingle, C. S.; Echelmeyer, K. A.; Valentine, V. B.; Elsberg, D.

    2001-12-01

    Bagley Ice Valley, in the St. Elias and Chugach Mountains of south-central Alaska, is an integral part of the largest connected glacierized terrain on the North American continent. From the flow divide between Mt. Logan and Mt. St. Elias, Bagley Ice Valley flows west-northwest for some 90 km down a slope of less than 1o, at widths up to 15 km, to a saddle-gap where it turns south-west to become Bering Glacier. During 4-13 September 2000, an airborne survey of Bagley Ice Valley was performed by Intermap Technologies, Inc., using their Star-3i X-band SAR interferometer. The resulting digital elevation model (DEM) covers an area of 3243 km2. The DEM elevations are orthometric heights, in meters above the EGM96 geoid. The horizontal locations of the 10-m postings are with respect to the WGS84 ellipsoid. On 26 August 2000, 9 to 18 days prior to the Intermap Star-3i survey, a small-aircraft laser altimeter profile was acquired along the central flow line for validation. The laser altimeter data consists of elevations above the WGS84 ellipsoid and orthometric heights above GEOID99-Alaska. Assessment of the accuracy of the Intermap Star-3i DEM was made by comparison of both the DEM orthometric heights and elevations above the WGS84 ellipsoid with the laser altimeter data. Comparison of the orthometric heights showed an average difference of 5.4 +/- 1.0 m (DEM surface higher). Comparison of elevations above the WGS84 ellipsoid showed an average difference of -0.77 +/- 0.93 m (DEM surface lower). This indicates that the X-band Star-3i interferometer was penetrating the glacier surface by an expected small amount. The WGS84 comparison is well within the 3 m RMS accuracy quoted for GT-3 DEM products. Snow accumulation may have occurred, however, on Bagley Ice Valley between 26 August and 4-13 September 2000. This will be estimated using a mass balance model and used to correct the altimeter-derived surface heights. The new DEM of Bagley Ice Valley will provide a reference

  10. Die Struktur der Handgesten im indischen Tanz nach dem „Nāṭya-Śāstra“ des Bharata (NŚBh)

    OpenAIRE

    Müller, Biliana

    2008-01-01

    In der vorliegenden Untersuchung wird eine Strukturanalyse der Gestensprache im indischen Tanz nach einem schriftlich vorliegenden Text vorgeschlagen – dem neunten Kapitel des ‚Nāṭya-Śāstra‘ eines legendären Autors namens Bharata. Der untersuchte Text ist Zeugnis für ein Zeichensystem, das über mehr als zwei Jahrtausende als Basis für die symbolische Interaktion auf dem indischen Subkontinent gedient hat und heute in zahlreichen Variationen präsent ist. Dieses Zeichensystem ist im semiotische...

  11. Fusion of Multi-Source Satellite Data and DEMs to Create a New Glacier Inventory for Novaya Zemlya

    Directory of Open Access Journals (Sweden)

    Philipp Rastner

    2017-11-01

    Full Text Available Monitoring glacier changes in remote Arctic regions are strongly facilitated by satellite data. This is especially true for the Russian Arctic where recently increased optical and SAR satellite imagery (Landsat 8 OLI, Sentinel 1/2, and digital elevation models (TanDEM-X, ArcticDEM are becoming available. These datasets offer new possibilities to create high-quality glacier inventories. Here, we present a new glacier inventory derived from a fusion of multi-source satellite data for Novaya Zemlya in the Russian Arctic. We mainly used Landsat 8 OLI data to automatically map glaciers with the band ratio method. Missing debris-covered glacier parts and misclassified lakes were manually corrected. Whereas perennial snow fields were a major obstacle in glacier identification, seasonal snow was identified and removed using Landsat 5 TM scenes from the year 1998. Drainage basins were derived semi-automatically using the ArcticDEM (gap-filled by the ASTER GDEM V2 and manually corrected using fringes from ALOS PALSAR. The new glacier inventory gives a glacierized area of 22,379 ± 246.16 km2 with 1474 glacier entities >0.05 km2. The region is dominated by large glaciers, as 909 glaciers <0.5 km2 (62% by number cover only 156 ± 1.7 km2 or 0.7% of the area, whereas 49 glaciers >100 km2 (3.3% by number cover 18,724 ± 205.9 km2 or 84%. In total, 41 glaciers are marine terminating covering an area of 16,063.7 ± 118.8 km2. The mean elevation is 596 m for all glaciers in the study region (528 m in the northern part, 641 in the southern part. South-east (north-west facing glaciers cover >35% (20% of the area. For the smaller glaciers in the southern part we calculated an area loss of ~5% (52.5 ± 4.5 km2 from 2001 to 2016.

  12. Time Series of Tropical-Forest Structure from TanDEM-X, Transformed to Time Series of Biomass by MODIS

    Science.gov (United States)

    Treuhaft, R. N.; Baccini, A.; Goncalves, F. G.; Lei, Y.; Keller, M.; Walker, W. S.

    2017-12-01

    Tropical forests account for about 50% of the world's forested biomass, and play a critical role in the control of atmospheric carbon dioxide. Large-scale (1000's of km) changes in forest structure and biomass bear on global carbon source-sink dynamics, while small-scale (phase-height observation, we show forest phase-height time series from the TanDEM-X radar interferometer at X-band (3 cm), taken with monthly and sub-hectare temporal and spatial resolution, respectively. The measurements were taken with more than 30 TanDEM-X passes over Tapajós National Forest in the Brazilian Amazon between 2011 and 2014. The transformation of phase-height rates into aboveground biomass (AGB) rates is based on the idea that the change in AGB due to a change in phase-height depends on the plot's AGB. Plots with higher AGB will produce more AGB for a given increase in height or phase-height. Postulating a power-law dependence of plot-level mass density on physical height, we previously found that the best conversion factors for transforming phase-height rate to AGB rate were indeed dependent on AGB. For 78 plots, we demonstrated AGB rates from InSAR phase-height rates using AGB from field measurements. For regional modeling of the Amazon Basin, field measurements of AGB, to specify the conversion factors, is impractical. Conversion factors from InSAR phase-height rate to AGB rate in this talk will be based on AGB derived from the Moderate Resolution Imaging Spectroradiometer (MODIS). AGB measurement from MODIS is based on the spectral reflectance of 7 bands from the visible to short wave infrared, and auxiliary metrics describing the variance in reflectance. The mapping of MODIS reflectance to AGB is enabled by training a machine learning algorithm with lidar-derived AGB data, which are in turn trained by field measurements for small areas. The performance of TanDEM-X AGB rate from MODIS-derived conversion factors will be compared to that derived from field-based conversion

  13. Bridging scale gaps between regional maps of forest aboveground biomass and field sampling plots using TanDEM-X data

    Science.gov (United States)

    Ni, W.; Zhang, Z.; Sun, G.

    2017-12-01

    Several large-scale maps of forest AGB have been released [1] [2] [3]. However, these existing global or regional datasets were only approximations based on combining land cover type and representative values instead of measurements of actual forest aboveground biomass or forest heights [4]. Rodríguez-Veiga et al[5] reported obvious discrepancies of existing forest biomass stock maps with in-situ observations in Mexico. One of the biggest challenges to the credibility of these maps comes from the scale gaps between the size of field sampling plots used to develop(or validate) estimation models and the pixel size of these maps and the availability of field sampling plots with sufficient size for the verification of these products [6]. It is time-consuming and labor-intensive to collect sufficient number of field sampling data over the plot size of the same as resolutions of regional maps. The smaller field sampling plots cannot fully represent the spatial heterogeneity of forest stands as shown in Figure 1. Forest AGB is directly determined by forest heights, diameter at breast height (DBH) of each tree, forest density and tree species. What measured in the field sampling are the geometrical characteristics of forest stands including the DBH, tree heights and forest densities. The LiDAR data is considered as the best dataset for the estimation of forest AGB. The main reason is that LiDAR can directly capture geometrical features of forest stands by its range detection capabilities.The remotely sensed dataset, which is capable of direct measurements of forest spatial structures, may serve as a ladder to bridge the scale gaps between the pixel size of regional maps of forest AGB and field sampling plots. Several researches report that TanDEM-X data can be used to characterize the forest spatial structures [7, 8]. In this study, the forest AGB map of northeast China were produced using ALOS/PALSAR data taking TanDEM-X data as a bridges. The TanDEM-X InSAR data used in

  14. Observation of Drifting Icebergs and Sea Ice from Space by TerraSAR-X and TanDEM-X

    Science.gov (United States)

    Won, Joong-Sun

    2017-04-01

    Detection and monitoring drifting icebergs and sea ice is of interest across wide range of Arctic and Antarctic coastal studies such as security of navigation, climatic impact, geological impact, etc. It is not easy to discriminate drifting ices from stationary ones, and to measure their drifting speeds. There is a potential to use space-borne SAR for this purpose, but it is difficult to precisely measure because the drift velocity is usually very slow. In this study, we investigate two approaches for discriminating drifting ices on the sea from surrounding static ones and for measuring their range velocity. The first method is to utilize the quad-pol TerraSAR-X which adopts dual receive antenna (DRA), and the second one is to examine the potential use of TanDEM-X bistatic along-track interferometry (ATI). To utilize DRA mode quad-pol SAR as ATI, it is necessary to remove the phase difference of scattering centers between transmitted H- and V-pol signals. By assume that the individual scattering center of returned signal does not change for a few inter-pulse periods, it is possible to measure the Doppler frequency induced by motion through measuring slow-time (or azimuth time) Doppler phase derivative of co-pol or cross-pol pairs. Results applied to TerraSAR-X quad-pol data over the Cape Columbia in the Arctic Ocean are to be presented and discussed. It was successful to detect and measure drift sea ice that was flowing away from the antenna with a velocity of about 0.37 m/s (or 1.4 km/h) to 0.67 m/s (or 2.4 km/h) while neighboring ones were static. A more sophisticated approach would be a bistatic ATI which exploits a long along-track baseline for observation of slowly moving ground objects. TanDEM-X bistatic ATI pairs are examined, which were acquired at an Antarctic coast. The ATI interferograms show an innovative capability of TanDEM-X/TerraSAR-X constellation. An along-track baseline of a few hundred meters is superior to a few meter baseline of DRA mode ATI

  15. Pollutants from road traffic and breathing problems in children; Schadstoffe aus dem Strassenverkehr und Atemwegsbeschwerden bei Kindern

    Energy Technology Data Exchange (ETDEWEB)

    Mutius, E. von [Muenchen Univ. (Germany). Dr. von Haunersche Kinderklinik

    1996-06-01

    So far, there ave been few studies on measurable health effects of emissions from road traffic. An analysis of the available studies yields no clear indication of a relationship between road traffic emissions and the incidence of asthma and allergies in infants. On the other hand, there are no valid data on individual pollutant exposure of infants in the framework of epidemiological studies which take account of other influencing factors.(orig./MG) [Deutsch] Der Frag, ob eine Schadstoffbelastung durch den Strassenverkehr einen messbaren schaedigenden Effekt auf die menschliche Gesundheit hat, ist bislang in wenigen Studien nachgegangen worden. Analysiert man die vorliegenden Studien, ergibt sich derzeit kein eindeutiger Hinweis auf einen starken Zusammenhang zwischen der Strassenverkehrsbelastung und dem Auftreten von Asthma und Allergien beim Kind. Allerdings fehlt es an validen Daten zur individuellen Schadstoffexposition bei Kindern im Rahmen epidemiologischer Studien, ie eine Beruecksichtigung anderer Einfluss- und Stoervariablen erlauben. (orig/MG)

  16. Validating the MFiX-DEM Model for Flow Regime Prediction in a 3D Spouted Bed

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Subhodeep [National Energy Technology Lab. (NETL), Pittsburgh, PA, and Morgantown, WV (United States). Research and Innovation Center; Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); Guenther, Chris [National Energy Technology Lab. (NETL), Pittsburgh, PA, and Morgantown, WV (United States). Research and Innovation Center; Rogers, William A. [National Energy Technology Lab. (NETL), Pittsburgh, PA, and Morgantown, WV (United States). Research and Innovation Center

    2018-02-08

    The spout-fluidized bed reactor with relatively large oxygen carrier particles offers several advantages in chemical looping combustion operation using solid fuels. The large difference in size and weight between the oxygen carrier particles and the smaller coal or ash particles allows the oxygen carrier to be easily segregated for recirculation; the increased solids mixing due to dynamic flow pattern in the spout-fluidization regime prevents agglomeration. The primary objective in this work is to determine the effectiveness of the MFiX-DEM model in predicting the flow regime in a spouted bed. Successful validation of the code will allow the user to fine tune the operating conditions of a spouted bed to achieve the desired operating condition.

  17. Herausforderungen beim Aufbau und bei der Pflege einer Bilddatenbank – ein Anwendungsbeispiel aus dem Digitalen Forschungsarchiv Byzanz (DiFAB

    Directory of Open Access Journals (Sweden)

    Nina Rannharter

    2017-09-01

    Full Text Available Mit Metadaten versehene, digital archivierte Bilder sind aufgrund ihrer hohen Komplexität eine ständige Herausforderung für den Aufbau von Metadatenstrukturen und für das Beibehalten von adäquaten Metadatenstandards in Bilddatenbanken. Besonders bei Bildern über eine materielle Kultur zeichnet sich diese Komplexität in den diversen Ebenen ab. Zur Verdeutlichung dieser Problematik dient ein einzelnes Monument mit seiner fotographischen Dokumentation als geisteswissenschaftliches Anwendungsbeispiel aus dem Digitalen Forschungsarchiv Byzanz (DiFAB der Universität Wien. Unter der grundsätzlichen Berücksichtigung der künftigen Anforderungen und der einfachen Navigation von Metadaten beinhaltet dieser Beitrag u. a. die Herausforderungen mit den diversen analogen und digitalen Formen der Dokumentation, der historischen Geographie, der kulturspezifischen Terminologie sowie mit der kunsthistorischen Bedeutung einer exakten und unscharfen Datierung für Forschungsarchive.

  18. O sujeito e o efeito da própria fala na afasia e na demência

    Directory of Open Access Journals (Sweden)

    Rosana Landi

    2010-12-01

    Full Text Available Este trabalho aborda uma questão suscitada pelo meu encontro com falas de sujeitos com demência e com afasia. Com Saussure, reconheço a enunciação da ordem própria da língua e assumo que a língua não é nomenclatura. Procuro fazer valer as leis de referência interna da linguagem, que deslocam o signo para o lugar de efeito de suas operações. Com base neste solo teórico, encontro nas “falas vazias”, falas plenas de uma verdade sobre a relação profunda e indissolúvel do sujeito com a linguagem.

  19. Interkulturelle kommunikative Kompetenz – ein Versuch der Operationalisierung aus dem Fach Deutsch an der dänischen Lehrerausbildung

    DEFF Research Database (Denmark)

    Bjerre, Kirsten; Daryai-Hansen, Petra

    2017-01-01

    Mit diesem Artikel versuchen wir, den Begriff 'interkulturelle kommunikative Kompetenz‘ theoretisch zu entwickeln. Wir gehen zunächst der Frage nach, warum im Fach Deutsch als Fremdsprache mit interkultureller kommunikativer Kompetenz gearbeitet werden sollte und welche Herausforderungen sich...... hierbei stellen. Im Anschluss präsentieren wir unser Modell der interkulturellen kommunikativen Kompetenz, das wir für das Fach Deutsch ain der dänischen Lehrerausbildung auf der Grundlage eines Modells von Michael Byram aus dem Jahre 1997 entwickelt haben. Byrams Modell der interkulturellen...... zunächst die Begriffe ‚Kompetenz‘, ‚Kultur‘, ‚kommunikative Kompetenz‘ und ‚interkulturelle Kompetenz‘. Wir konkretisieren die Dimensionen des Modells im Anschluss anhand eines Unterrichtsbeispiels für das Fach Deutsch an der dänischen Einheitsschule („Folkeskole“). Abschließend skizzieren wir, wie unser...

  20. Creating high-resolution bare-earth digital elevation models (DEMs) from stereo imagery in an area of densely vegetated deciduous forest using combinations of procedures designed for lidar point cloud filtering

    Science.gov (United States)

    DeWitt, Jessica D.; Warner, Timothy A.; Chirico, Peter G.; Bergstresser, Sarah E.

    2017-01-01

    For areas of the world that do not have access to lidar, fine-scale digital elevation models (DEMs) can be photogrammetrically created using globally available high-spatial resolution stereo satellite imagery. The resultant DEM is best termed a digital surface model (DSM) because it includes heights of surface features. In densely vegetated conditions, this inclusion can limit its usefulness in applications requiring a bare-earth DEM. This study explores the use of techniques designed for filtering lidar point clouds to mitigate the elevation artifacts caused by above ground features, within the context of a case study of Prince William Forest Park, Virginia, USA. The influences of land cover and leaf-on vs. leaf-off conditions are investigated, and the accuracy of the raw photogrammetric DSM extracted from leaf-on imagery was between that of a lidar bare-earth DEM and the Shuttle Radar Topography Mission DEM. Although the filtered leaf-on photogrammetric DEM retains some artifacts of the vegetation canopy and may not be useful for some applications, filtering procedures significantly improved the accuracy of the modeled terrain. The accuracy of the DSM extracted in leaf-off conditions was comparable in most areas to the lidar bare-earth DEM and filtering procedures resulted in accuracy comparable of that to the lidar DEM.

  1. Dementia Population Risk Tool (DemPoRT): study protocol for a predictive algorithm assessing dementia risk in the community.

    Science.gov (United States)

    Fisher, Stacey; Hsu, Amy; Mojaverian, Nassim; Taljaard, Monica; Huyer, Gregory; Manuel, Douglas G; Tanuseputro, Peter

    2017-10-24

    The burden of disease from dementia is a growing global concern as incidence increases dramatically with age, and average life expectancy has been increasing around the world. Planning for an ageing population requires reliable projections of dementia prevalence; however, existing population projections are simple and have poor predictive accuracy. The Dementia Population Risk Tool (DemPoRT) will predict incidence of dementia in the population setting using multivariable modelling techniques and will be used to project dementia prevalence. The derivation cohort will consist of elderly Ontario respondents of the Canadian Community Health Survey (CCHS) (2001, 2003, 2005 and 2007; 18 764 males and 25 288 females). Prespecified predictors include sociodemographic, general health, behavioural, functional and health condition variables. Incident dementia will be identified through individual linkage of survey respondents to population-level administrative healthcare databases (1797 and 3281 events, and 117 795 and 166 573 person-years of follow-up, for males and females, respectively, until 31 March 2014). Using time of first dementia capture as the primary outcome and death as a competing risk, sex-specific proportional hazards regression models will be estimated. The 2008/2009 CCHS survey will be used for validation (approximately 4600 males and 6300 females). Overall calibration and discrimination will be assessed as well as calibration within predefined subgroups of importance to clinicians and policy makers. Research ethics approval has been granted by the Ottawa Health Science Network Research Ethics Board. DemPoRT results will be submitted for publication in peer-review journals and presented at scientific meetings. The algorithm will be assessable online for both population and individual uses. ClinicalTrials.gov NCT03155815, pre-results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No

  2. Estimating Vegetation Height from WorldView-02 and ArcticDEM Data for Broad Ecological Applications

    Science.gov (United States)

    Meddens, A. J.; Vierling, L. A.; Eitel, J.; Jennewein, J. S.; White, J. C.; Wulder, M.

    2017-12-01

    Boreal and arctic regions are warming at an unprecedented rate, and at a rate higher than in other regions across the globe. Ecological processes are highly responsive to temperature and therefore substantial changes in these northern ecosystems are expected. Recently, NASA initiated the Arctic-Boreal Vulnerability Experiment (ABoVE), which is a large-scale field campaign that aims to gain a better understanding of how the arctic responds to environmental change. High-resolution data products that quantify vegetation structure and function will improve efforts to assess these environmental change impacts. Our objective was to develop and test an approach that allows for mapping vegetation height at a 5m grid cell resolution across the ABoVE domain. To accomplish this, we selected three study areas across a north-south gradient in Alaska, representing an area of approximately 130 km2. We developed a RandomForest modeling approach for predicting vegetation height using the ArcticDEM (a digital surface model produced across the Arctic by the Polar Geospatial Center) and high-resolution multispectral satellite data (WorldView-2) in conjunction with aerial lidar data for calibration and validation. Vegetation height was successfully predicted across the three study areas and evaluated using an independent dataset, with R2 ranging from 0.58 to 0.76 and RMSEs ranging from 1.8 to 2.4 m. This predicted vegetation height dataset also led to the development of a digital terrain model using the ArcticDEM digital surface model by removing canopy heights from the surface heights. Our results show potential to establish a high resolution pan-arctic vegetation height map, which will provide useful information to a broad range of ongoing and future ecological research in high northern latitudes.

  3. Perfis Diferenciais de Perda de Memória entre a Demência Frontotemporal e a do Tipo Alzheimer

    Directory of Open Access Journals (Sweden)

    Allegri Ricardo F.

    2001-01-01

    Full Text Available Os estados iniciais da demência tipo Alzheimer (DTA caracterizam-se classicamente por deterioração da memória enquanto que as mudanças de conduta e de personalidade aparecem nas etapas iniciais da demência frontotemporal (DFT. Entretanto, na prática clínica, o diagnóstico diferencial é difícil. O objetivo do presente trabalho foi estudar o rendimento da memória de pacientes com DTA (n= 20 e com DFT (n= 20 comparando-o com um grupo de controles (n = 20. Os pacientes, emparelhados por idade e escolaridade, foram avaliados com uma bateria neuropsicológica exaustiva. Para a avaliação da memória, examinou-se a "queixa subjetiva" de perda de memória (memória subjetiva, a aprendizagem de uma lista de palavras (memória episódica e o desempenho no teste de denominação de Boston (memória semântica. As pontuações de ambos os grupos de pacientes, na grande maioria das provas, foram significativamente inferiores às dos controles. Os pacientes com DTA mostraram uma deterioração global da memória episódica (tipo amnésia e semântica com um alto nível de queixa subjetiva. Os sujeitos com DFT, por outro lado, apresentaram um déficit de memória importante na recuperação da informação, mas com melhores capacidades de registro da informação, apesar das dificuldades de reconhecimento do seu distúrbio.

  4. Automated classifications of topography from DEMs by an unsupervised nested-means algorithm and a three-part geometric signature

    Science.gov (United States)

    Iwahashi, J.; Pike, R.J.

    2007-01-01

    An iterative procedure that implements the classification of continuous topography as a problem in digital image-processing automatically divides an area into categories of surface form; three taxonomic criteria-slope gradient, local convexity, and surface texture-are calculated from a square-grid digital elevation model (DEM). The sequence of programmed operations combines twofold-partitioned maps of the three variables converted to greyscale images, using the mean of each variable as the dividing threshold. To subdivide increasingly subtle topography, grid cells sloping at less than mean gradient of the input DEM are classified by designating mean values of successively lower-sloping subsets of the study area (nested means) as taxonomic thresholds, thereby increasing the number of output categories from the minimum 8 to 12 or 16. Program output is exemplified by 16 topographic types for the world at 1-km spatial resolution (SRTM30 data), the Japanese Islands at 270??m, and part of Hokkaido at 55??m. Because the procedure is unsupervised and reflects frequency distributions of the input variables rather than pre-set criteria, the resulting classes are undefined and must be calibrated empirically by subsequent analysis. Maps of the example classifications reflect physiographic regions, geological structure, and landform as well as slope materials and processes; fine-textured terrain categories tend to correlate with erosional topography or older surfaces, coarse-textured classes with areas of little dissection. In Japan the resulting classes approximate landform types mapped from airphoto analysis, while in the Americas they create map patterns resembling Hammond's terrain types or surface-form classes; SRTM30 output for the United States compares favorably with Fenneman's physical divisions. Experiments are suggested for further developing the method; the Arc/Info AML and the map of terrain classes for the world are available as online downloads. ?? 2006 Elsevier

  5. Prevalência de demência em diversas regiões do mundo: Análise dos estudos epidemiológicos de 1994 a 2000

    Directory of Open Access Journals (Sweden)

    Lopes Marcos A.

    2002-01-01

    Full Text Available OBJETIVO: Analisar os estudos de prevalência de demência, no período de 1994 a 2000. MÉTODOS: Foram utilizadas as bases de dados Medline e Lilacs e os seguintes critérios de inclusão: constituir artigo original, estimar prevalência de demência e utilizar amostra comunitária. RESULTADOS: Foram avaliados 38 artigos, originários de todos os continentes. A idade exerceu importante influência sobre os resultados, com taxas médias de prevalência de demência que variaram de 1,17% na faixa de 65-69 anos, a 54,83% na faixa acima de 95 anos. Houve predomínio do sexo feminino em 75% dos estudos avaliados. A relação doença de Alzheimer/demência vascular foi maior na América do Sul e menor na Ásia. DISCUSSÃO: Ocorreram avanços metodológicos, sobretudo com relação à maior homogeneidade dos critérios diagnósticos. O efeito da idade sobre o aumento das taxas de prevalência foi pronunciado, principalmente até os 90 anos de idade.

  6. Reflexões tardias sobre Pierrot Le Fouou lições de cinema com O Demônio das onze horas

    Directory of Open Access Journals (Sweden)

    Silva, João Guilherme Barone Reis e

    2001-01-01

    Full Text Available Vista de longe, a fila na porta do cinema era um grande plano geral. O luminoso em letras vermelhas, refletia o título do filme no asfalto molhado: O Demônio das Onze Horas - Godard

  7. Reflexões tardias sobre Pierrot Le Fouou lições de cinema com O Demônio das onze horas

    Directory of Open Access Journals (Sweden)

    Silva, João Guilherme Barone Reis e

    2001-01-01

    Full Text Available Vista de longe, a fila na porta do cinema era um grande plano geral. O luminoso em letras vermelhas, refletia o título do filme no asfalto molhado: O Demônio das Onze Horas - Godard.

  8. Demócrito: o racionalismo como representação artística do mundo segundo o filósofo Friedrich Nietzsche

    Directory of Open Access Journals (Sweden)

    Maria Cristina dos Santos de Souza

    2007-06-01

    Full Text Available Este artigo visa apresentar o pensamento original de Nietzsche sobre a vida e a obra do filósofo grego Demócrito, o qual ele considera o ultimo caráter filosófico puro grego, extraído sobretudo das lições ministradas por Nietzsche na Universidade.

  9. Bio-Lebensmittel in der öffentlichen Gemeinschaftsverpflegung - Eine Studie auf dem dänischen Markt und in den entsprechenden Aufsichtsbehörden

    DEFF Research Database (Denmark)

    Nielsen, Thorkild; Kristensen, Niels Heine; Mikkelsen, Bent Egberg

    2003-01-01

    Nielsen T, Kristensen NH, Mikkelsen BE (2003): Bio-Lebensmittel in der öffentlichen Gemeinschaftsverpflegung - Eine Studie auf dem dänischen Markt und in den entsprechenden Aufsichtsbehörden. Proceedings from "Ökologischer Landbau der Zukunft - Die 7. Wissenschaftstagung zum Ökologischen Landbau...

  10. Large-baseline InSAR for precise topographic mapping: a framework for TanDEM-X large-baseline data

    Directory of Open Access Journals (Sweden)

    M. Pinheiro

    2017-09-01

    Full Text Available The global Digital Elevation Model (DEM resulting from the TanDEM-X mission provides information about the world topography with outstanding precision. In fact, performance analysis carried out with the already available data have shown that the global product is well within the requirements of 10 m absolute vertical accuracy and 2 m relative vertical accuracy for flat to moderate terrain. The mission's science phase took place from October 2014 to December 2015. During this phase, bistatic acquisitions with across-track separation between the two satellites up to 3.6 km at the equator were commanded. Since the relative vertical accuracy of InSAR derived elevation models is, in principle, inversely proportional to the system baseline, the TanDEM-X science phase opened the doors for the generation of elevation models with improved quality with respect to the standard product. However, the interferometric processing of the large-baseline data is troublesome due to the increased volume decorrelation and very high frequency of the phase variations. Hence, in order to fully profit from the increased baseline, sophisticated algorithms for the interferometric processing, and, in particular, for the phase unwrapping have to be considered. This paper proposes a novel dual-baseline region-growing framework for the phase unwrapping of the large-baseline interferograms. Results from two experiments with data from the TanDEM-X science phase are discussed, corroborating the expected increased level of detail of the large-baseline DEMs.

  11. Chemoembolization with drug-eluting microspheres (DEM-TACE for hepatocellular carcinoma: single-center review of safety and efficacy

    Directory of Open Access Journals (Sweden)

    Bishay VL

    2014-11-01

    Full Text Available VL Bishay,1 K Maglione,1 R Khanna,2 KM Lee,1 AM Fischman,1 RA Lookstein,1 E Kim1 1Department of Radiology, Icahn School of Medicine at the Mount Sinai Hospital, New York, NY, USA; 2Department of Radiology, Queens Hospital Center, Jamaica, NY, USA Purpose: This study examines the safety and efficacy of transarterial chemoembolization using doxorubicin-loaded 30–60 µm QuadraSphere microspheres (DEM-TACE for the treatment of hepatocellular carcinoma. Materials and methods: Over 10 weeks, patients with hepatocellular carcinoma. (Child–Pugh A/B: 65%/35% were embolized with 30–60 µm QuadraSphere microspheres. Excluded patients had previous locoregional therapy, macrovascular invasion, extrahepatic disease, Child–Pugh score >B7, ECOG performance status >0, and total bilirubin >3 mg/dL. Technical success, minor and major complications, 30-day hospital readmission rate, and 30-day mortality were assessed. α-Fetoprotein levels before and after treatment were compared. Local response was evaluated by radiologic tumor response per modified Response Evaluation Criteria in Solid Tumors 1 month after treatment. Results: Thirty tumors (mean size, 2.3 cm; range, 1.0–4.9 cm were treated in 20 patients (16 male and 4 female; mean age, 64.7 years. There were no major complications. Thirty-day mortality was 0%. Minor complications included postembolization syndrome in 16.7% of cases and transient rise in liver enzymes requiring no therapy. Mean a-fetoprotein levels trended down following treatment (71.8±201.9 ng/mL vs 53.4±116.7 ng/mL, but were not statistically significant. Complete response was achieved in 30% of patients, partial response in 35%, stable disease in 30%, and progression of disease in 5%. Overall objective response was 65%. Mean follow-up was 10.4 months (range, 2–16.4 months. Conclusion: DEM-TACE with doxorubicin-loaded 30–60 µm QuadraSpheres is feasible, well tolerated, and associated with promising tumor response in early and

  12. Efficacy of pharmacological treatment of dementia Eficácia do tratamento farmacológico da demência

    Directory of Open Access Journals (Sweden)

    Leon Flicker

    2002-04-01

    Full Text Available Over the last 25 years an increasing number of studies have been performed to evaluate therapeutic agents for people with dementia. Although numerous agents have been trialed at this stage there little evidence that therapeutic agents can prevent dementia or ameliorate the progression of dementia of any type. There is some evidence that specific medical management in high risk individuals can prevent strokes, and thus probably prevent vascular dementia, although this is extrapolating from the available evidence. There is considerable evidence that cholinesterase inhibitor are effective for cognitive symptoms in people with mild to moderate AD, and there is some evidence that they are also effective for other behavioural and functional symptoms. The currently available cholinesterase inhibitors seem to have approximately the same sized effect and thus the choice of agent may be largely determined by the incidence of side-effects. These agents have modest effects and a cautious therapeutic trial is indicated for those subjects with mild to moderate AD.Durante os últimos 25 anos, um número crescente de ensaios clínicos vem sendo conduzido com objetivo de avaliar a eficácia terapêutica de drogas para o tratamento de indivíduos com demência. Embora várias medicações tenham sido testadas, até o momento há pouca evidência de que essas drogas possam prevenir a síndrome demencial ou interferir em sua progressão, qualquer que seja a etiologia. Há alguma evidência de que intervenções específicas podem reduzir o risco de acidente vascular cerebral em indivíduos com alto risco e, assim, prevenir o desenvolvimento de demência vascular – embora isto seja uma extrapolação feita a partir dos dados disponíveis. Há evidência relativamente robusta de que os inibidores da colinesterase são eficazes para o tratamento dos sintomas cognitivos de pessoas com doença de Alzheimer (DA de gravidade leve à moderada, e há alguma evidência de

  13. Mapping Geological Structures In Wadi Ghoweibaarea, Northwest Gulf Of Suez, Egypt, Using Aster-Spot Data Fusion And Aster DEM

    International Nuclear Information System (INIS)

    Abdeen, M.M.; Hassan, S.M.; EL-Kazzaz, Y.A.H.A.; Attia, G.M.; Yehia, M.A.

    2009-01-01

    Practical and economical constraints prompt the need of obtaining lithological and structural information for development of desert areas with reduced field effort. The fusion of multi-sensor satellite data is an effective mean of exploiting the complimentary nature of different data types. This technique allows fusion of spectral-spectral information of multi-source data with high accuracy. In the present study, fusion of SPOT and ASTER data was applied to test the potentiality of this technique in mapping geological formations and structural lineaments in Wadi Ghoweiba area, to the west of the northwestern tip of the Gulf of Suez, Egypt. ASTER data is characterized by a wide range of spectral bands (14 bands), while SPOT panchromatic data is characterized by high (10 meters) spatial resolution. Based on spectral characteristic analysis (SCA) of the 3 VNIR and the 6 SWIR bands of ASTER data, two false-color band-ratio images (1/3, 2/5, and 4/ 9) and (1/5, 8/9, and 4/6) in R, G, B were produced for better lithological discrimination. SPOT panchromatic image data was fused with ASTER band ratio images data using principal component (PC) and color normalization or Brovey transformation techniques. The fused images proved to be excellent for lithological discrimination. ASTER data includes bands 3N (Nadir) and 3B (Backward) that are acquired in the spectral range of near infrared region (from 0.78 to 0.86 microns) allowing extraction of digital elevation model (DEM). Three-dimensional perspective views were generated by draping SPOT-ASTER ratio fused images over ASTER DEM. This technique was used to enhance morphologically-defined structures. The fused images and the 3D perspective views were interpreted to produce a photo geological-structural map that was verified using the available geological maps and subsequent field check. The produced photo geological map indicates that fusion of SPOT and ASTER ratio image's data is a reliable technique for geological mapping

  14. Announcement of the agreement between the Federal Ministry of Education, Science, Research and Technology of the Federal Republic of Germany and the Department of Energy of the United States about the exchange of information in the area of energy. As of November 30, 1994; Bekanntmachung der Vereinbarung zwischen dem Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie der Bundesrepublik Deutschland und dem Department of Energy der Vereinigten Staaten ueber den Austausch von Informationen auf dem Energiegebiet. Vom 30. November 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-11

    The contracting parties establish under this agreement for the benefit of both sides and as support for their research and development work in the field of energy and exchange of information in the area of energy. This exchange includes publicly available scientific-technical information, concluded energy research and development projects, current energy research and development projects, relevant facts and figures as well as research in the area of information technology. (orig./HP) [Deutsch] Die Vertragsparteien richten im Rahmen dieser Vereinbarung zum beiderseitigen Nutzen und zur Ergaenzung ihrer Forschungs- und Entwicklungsarbeiten auf dem Energiesektor einen Austausch von Informationen auf dem Energiegebiet ein. Dieser Austausch umfasst oeffentlich zugaengliche wissenschaftlich-technische Informationen ueber abgeschlossene Energieforschungs- und -entwicklungsvorhaben, laufende Energieforschungs- und -entwicklungsvorhaben, einschlaegige Fakten und Zahlen sowie informationstechnische Forschung. (orig./HP)

  15. Body Mass Index in Different Dementia Disorders: Results from the Swedish Dementia Quality Registry (SveDem

    Directory of Open Access Journals (Sweden)

    Gerd Faxén-Irving

    2014-04-01

    Full Text Available Background: Most patients with dementia lose body weight over the course of the disease and have a lower body mass index (BMI than subjects with normal cognition. Aims: To examine body mass index and how it correlates with cognitive status, age and gender in patients with different dementia disorders. Materials and Methods: Data from newly diagnosed dementia patients in the Swedish Dementia Quality Registry (SveDem and recorded information about age, gender, cognitive status and BMI was analyzed using independent samples t tests and one-way analysis of variance. Results: A total of 12,015 patients, 7,121 females and 4,894 males were included in the study. The average BMI was 24. More than a quarter of the patients had a BMI of Conclusion: At the time of diagnosis, patients with various dementia disorders had a BMI within the normal range. However, a significant number had a BMI in a lower, suboptimal range for older persons stressing the need for nutritional assessment as part of the dementia work up. Further analyses with longitudinal follow-up are needed to investigate BMI changes over time.

  16. DEM Study of Wet Cohesive Particles in the Presence of Liquid Bridges in a Gas Fluidized Bed

    Directory of Open Access Journals (Sweden)

    Yurong He

    2014-01-01

    Full Text Available A modified discrete element method (DEM was constructed by compositing an additional liquid-bridge module into the traditional soft-sphere interaction model. Simulations of particles with and without liquid bridges are conducted in a bubbling fluidized bed. The geometry of the simulated bed is the same as the one in Müller’s experiment (Müller et al., 2008. A comparison between the dry and the wet particular systems is carried out on the bubble behavior, the bed fluctuation, and the mixing process. The bubble in the dry system possesses a regular round shape and falling of scattered particles exists while the bubble boundary of the wet particles becomes rough with branches of agglomerates stretching into it. The mixing of the dry system is quicker than that of the wet system. Several interparticle liquid contents are applied in this work to find their influence on the kinetic characteristic of the wet particle flow. With an increase of liquid content, the mixing process costs more time to be completed. Symmetrical profiles of the velocity and granular temperature are found for two low liquid contents (0.001% and 0.01%, while it is antisymmetrical for the highest liquid content (0.1%.

  17. Negro é o inferno! Um ensaio sobre as cores dos homens, dos demônios e dos deuses

    Directory of Open Access Journals (Sweden)

    Walker Douglas Pincerati

    2016-10-01

    Full Text Available http://dx.doi.org/10.5007/1984-8420.2016v17n2p46 Problematiza-se o par negro.branco na formação social brasileira, trabalhando a hipótese de que ‘negro’ não é cor, mas a metáfora do corpo do ser infernal. Estatísticas oficiais, a história da formação do Brasil, um enunciado de um Deputado Federal Pastor, o quadro A libertação dos Escravos de Pedro Américo (1889 e a história da construção das catedrais góticas medievais são evocadas para analisá-lo, desde o ponto de vista linguístico-discursivo. Nota-se, destarte, uma longa história do alinhamento dos significantes branco-luz-deuses-céu-liberdade... e negro-escuridão-demônios-inferno-escravidão... atuando ainda no nosso país.

  18. Coupled hydro-thermo-mechanical modeling of hydraulic fracturing in quasi-brittle rocks using BPM-DEM

    Directory of Open Access Journals (Sweden)

    Ingrid Tomac

    2017-02-01

    Full Text Available This paper presents an improved understanding of coupled hydro-thermo-mechanical (HTM hydraulic fracturing of quasi-brittle rock using the bonded particle model (BPM within the discrete element method (DEM. BPM has been recently extended by the authors to account for coupled convective–conductive heat flow and transport, and to enable full hydro-thermal fluid–solid coupled modeling. The application of the work is on enhanced geothermal systems (EGSs, and hydraulic fracturing of hot dry rock (HDR is studied in terms of the impact of temperature difference between rock and a flowing fracturing fluid. Micro-mechanical investigation of temperature and fracturing fluid effects on hydraulic fracturing damage in rocks is presented. It was found that fracture is shorter with pronounced secondary microcracking along the main fracture for the case when the convective–conductive thermal heat exchange is considered. First, the convection heat exchange during low-viscosity fluid infiltration in permeable rock around the wellbore causes significant rock cooling, where a finger-like fluid infiltration was observed. Second, fluid infiltration inhibits pressure rise during pumping and delays fracture initiation and propagation. Additionally, thermal damage occurs in the whole area around the wellbore due to rock cooling and cold fluid infiltration. The size of a damaged area around the wellbore increases with decreasing fluid dynamic viscosity. Fluid and rock compressibility ratio was found to have significant effect on the fracture propagation velocity.

  19. Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) Study of Mass-Transfer Mechanisms in Riser Flow.

    Science.gov (United States)

    Carlos Varas, Álvaro E; Peters, E A J F; Kuipers, J A M

    2017-05-17

    We report a computational fluid dynamics-discrete element method (CFD-DEM) simulation study on the interplay between mass transfer and a heterogeneous catalyzed chemical reaction in cocurrent gas-particle flows as encountered in risers. Slip velocity, axial gas dispersion, gas bypassing, and particle mixing phenomena have been evaluated under riser flow conditions to study the complex system behavior in detail. The most important factors are found to be directly related to particle cluster formation. Low air-to-solids flux ratios lead to more heterogeneous systems, where the cluster formation is more pronounced and mass transfer more influenced. Falling clusters can be partially circumvented by the gas phase, which therefore does not fully interact with the cluster particles, leading to poor gas-solid contact efficiencies. Cluster gas-solid contact efficiencies are quantified at several gas superficial velocities, reaction rates, and dilution factors in order to gain more insight regarding the influence of clustering phenomena on the performance of riser reactors.

  20. Simulation of a Magneto-Rheological Fluid Based, Jamming, Soft Gripper Using the Soft Sphere DEM in LIGGGHTS

    Science.gov (United States)

    Leps, Thomas; Hartzell, Christine; Wereley, Norman; Choi, Young

    2017-11-01

    Jamming soft grippers are excellent universal grippers due to their low dependence on the shape of objects to be grabbed, and low stiffness, mitigating the need for object shape data and expensive force control of a stiff system. These grippers now rely on jamming transitions of dry grains under atmospheric pressure to hold objects. In order to expand their use to space environments, a gripper using magnetic actuation of a magneto-rheological fluid (MR Gripper) is being developed. The MR fluid is a suspension of μm scale iron grains in a silicone oil. When un-magnetized the fluid behaves as a dense suspension with low Bagnold number. When magnetized, it behaves like a jammed granular material, with magnetic forces between the grains dominating. We are simulating the gripper using LIGGGHTS, an open-source soft sphere DEM code. We have modeled both the deformable gripper membrane and the MR fluid itself using the LIGGGHTS framework. To our knowledge, this is the first time that the induced magnetic dipoles required to accurately simulate the jamming behavior of MR fluids have been modeled in LIGGGHTS. This simulation allows the rapid optimization of the hardware and magnetic field geometries, as well as the fluid behavior, without time consuming, and costly prototype revisions.

  1. Entwicklung und Evaluierung eines auf dem Stellungsfeldermodell basierenden syntaktischen Annotationsverfahrens für Lernerkorpora innerhalb einer Mehrebenen-Architektur mit Schwerpunkt auf schriftlichen Texten fortgeschrittener Deutschlerner

    OpenAIRE

    Doolittle, Seanna

    2008-01-01

    Die Arbeit zeigt exemplarisch die Möglichkeiten, die die Mehrebenen-Korpusarchitektur bei der Annotation von „standard-“ und „nicht standardsprachlichen“ Äußerungen in einem gemeinsamen Korpus bieten. // Konkret beschäftigt sie sich mit der Entwicklung und Evaluierung eines auf dem Stellungsfeldermodell basierenden syntaktischen Annotationsverfahrens für Lernerkorpora, bestehend aus schriftlichen Texten fortgeschrittener Deutschlerner, innerhalb einer Mehrebenen-Architektur. Die Felderannotat...

  2. Gully incision rates on the bedrock of a large dip-slope landslide revealed by multi-period LiDAR DEMs

    Science.gov (United States)

    Chan, Y. C.; Hsieh, Y. C.

    2017-12-01

    Recent advances in airborne laser scanning (ALS) technology have provided a great opportunity for characterizing surface erosion through developing improved methods in multi-period DEM differencing and geomorphometry. This study uses three periods of ALS digital elevation model (DEM) data to analyze the short-term erosional features of the Tsaoling landslide triggered by the 1999 Chi-Chi earthquake in Taiwan. Two methods for calculating the bedrock incision rate, the equal-interval cross section selection method and the continuous swath profiles selection method, were used in the study after nearly ten years of gully incision following the earthquake-triggered dip-slope landslide. Multi-temporal gully incision rates were obtained using the continuous swath profiles selection method, which is considered a practical and convenient approach in terrain change studies. After error estimation and comparison of the multi-period ALS DEMs, the terrain change in different periods can be directly calculated, reducing time-consuming fieldwork such as installation of erosion pins and measurement of topographic cross sections on site. In this study, the gully bedrock incision rates ranged between 0.23 and 3.98 m/year, remarkably higher than the typical results from the previous studies. By comparing the DEM data, aerial photos, and precipitation records of this area, the effects of erosion could be observed from the retreat of the Chunqiu Cliff outline during August 2011 to September 2012. It was inferred that the change in the topographic elevation during 2011-2012 was mainly due to the torrential rain brought by Typhoon Soula, which occurred on 30 July 2012. The local gully incision rate in the lower part of the landslide surface was remarkably faster than that of the other regions, suggesting that the fast incision of the toe area possibly contributes to the occurrence of repeated landslides in the Tsaoling area.

  3. Mapping boreal forest biomass from a SRTM and TanDEM-X based on canopy height model and Landsat spectral indices

    Science.gov (United States)

    Sadeghi, Yaser; St-Onge, Benoît; Leblon, Brigitte; Prieur, Jean-François; Simard, Marc

    2018-06-01

    We propose a method for mapping above-ground biomass (AGB) (Mg ha-1) in boreal forests based predominantly on Landsat 8 images and on canopy height models (CHM) generated using interferometric synthetic aperture radar (InSAR) from the Shuttle Radar Topographic Mission (SRTM) and the TanDEM-X mission. The original SRTM digital elevation model (DEM) was corrected by modelling the respective effects of landform and land cover on its errors and then subtracted from a TanDEM-X DSM to produce a SAR CHM. Among all the landform factors, the terrain curvature had the largest effect on SRTM elevation errors, with a r2 of 0.29. The NDSI was the best predictor of the residual SRTM land cover error, with a r2 of 0.30. The final SAR CHM had a RMSE of 2.45 m, with a bias of 0.07 m, compared to a lidar-based CHM. An AGB prediction model was developed based on a combination of the SAR CHM, TanDEM-X coherence, Landsat 8 NDVI, and other vegetation indices of RVI, DVI, GRVI, EVI, LAI, GNDVI, SAVI, GVI, Brightness, Greenness, and Wetness. The best results were obtained using a Random forest regression algorithm, at the stand level, yielding a RMSE of 26 Mg ha-1 (34% of average biomass), with a r2 of 0.62. This method has the potential of creating spatially continuous biomass maps over entire biomes using only spaceborne sensors and requiring only low-intensity calibration.

  4. Effect of DEM resolution on rainfall-triggered landslide modeling within a triangulated network-based model. A case study in the Luquillo Forest, Puerto Rico

    Science.gov (United States)

    Arnone, E.; Dialynas, Y. G.; Noto, L. V.; Bras, R. L.

    2013-12-01

    Catchment slope distribution is one of the topographic characteristics that significantly control rainfall-triggered landslide modeling, in both direct and indirect ways. Slope directly determines the soil volume associated with instability. Indirectly slope also affects the subsurface lateral redistribution of soil moisture across the basin, which in turn determines the water pore pressure conditions that impact slope stability. In this study, we investigate the influence of DEM resolution on slope stability and the slope stability analysis by using a distributed eco-hydrological and landslide model, the tRIBS-VEGGIE (Triangulated Irregular Network (TIN)-based Real-time Integrated Basin Simulator - VEGetation Generator for Interactive Evolution). The model implements a triangulated irregular network to describe the topography, and it is capable of evaluating vegetation dynamics and predicting shallow landslides triggered by rainfall. The impact of DEM resolution on the landslide prediction was studied using five TINs derived from five grid DEMs at different resolutions, i.e. 10, 20, 30, 50 and 70 m respectively. The analysis was carried out on the Mameyes Basin, located in the Luquillo Experimental Forest in Puerto Rico, where previous landslide analyses have been carried out. Results showed that the use of the irregular mesh reduced the loss of accuracy in the derived slope distribution when coarser resolutions were used. The impact of the different resolutions on soil moisture patterns was important only when the lateral redistribution was considerable, depending on hydrological properties and rainfall forcing. In some cases, the use of different DEM resolutions did not significantly affect tRIBS-VEGGIE landslide output, in terms of landslide locations, and values of slope and soil moisture at failure.

  5. Lider fallen zu wie die Tore der Burg : [luuletused kogust "Simunapäev"] / Kristiina Ehin ; aus dem Estnischen von Gisbert Jänicke

    Index Scriptorium Estoniae

    Ehin, Kristiina, 1977-

    2004-01-01

    Sisu: die nachricht von der sanktgeorgsnacht = Jüriöö sõnum ; sie standen unter einem schiefen dach = nad seisid viltuse katuse all ; "der soldat steht auf dem hof ..." = "püssimees seisab õues..." ; "der mond heult..." = "kuu ulub..." ; der frauenräuber = naisteröövija ; "ich schlafe als schlamm im wald..." = "magan mudana metsas..." ; "ruhig erhebt sich der weihrauchdunst..." = "vaikselt tõuseb taevasse..."

  6. Generation of large-scale forest height and disturbance maps through the fusion of NISAR and GEDI along with TanDEM-X/L

    Science.gov (United States)

    Lei, Y.; Treuhaft, R. N.; Siqueira, P.; Torbick, N.; Lucas, R.; Keller, M. M.; Schmidt, M.; Ducey, M. J.; Salas, W.

    2017-12-01

    Large-scale products of forest height and disturbance are essential for understanding the global carbon distribution as well as its changes in response to natural events and human activities. Regarding this scientific need, both NASA's GEDI and NASA-ISRO's NISAR are going to be launched in the 2018-2021 timeframe in parallel with DLR's current TanDEM-X and/or the proposed TanDEM-L, which provides a lot of potential for global ecosystem mapping. A new simple and efficient method of forest height mapping has been developed for combining spaceborne repeat-pass InSAR and lidar missions (e.g. NISAR and GEDI) which estimates temporal decorrelation parameters of repeat-pass InSAR and uses the lidar data as training samples. An open-access Python-based software has been developed for automated processing. As a result, a mosaic of forest height was generated for US states of Maine and New Hampshire (11.6 million ha) using JAXA's ALOS-1 and ALOS-2 HV-pol InSAR data and a small piece of lidar training samples (44,000 ha) with the height estimates validated against airborne lidar and field inventory data over both flat and mountainous areas. In addition, through estimating and correcting for the temporal decorrelation effects in the spaceborne repeat-pass InSAR coherence data and also utilizing the spaceborne single-pass InSAR phase data, forest disturbance such as selective logging is not only detected but also quantified in subtropical forests of Australia using ALOS-1 HH-pol InSAR data (validated against NASA's Landsat), as well as in tropics of Brazil using TanDEM-X and ALOS-2 HH-pol InSAR data (validated against field inventory data). The operational simplicity and efficiency make these methods a potential observing/processing prototype for the fusion of NISAR, GEDI and TanDEM-X/L.

  7. [Robert Schweitzer. Eine Unveröffentlichte Quelle zur Schulgeschichte von Reval Ferdinand Wiedemanns Geschichte des Revaler Gouvernementsgymnasiums aus dem Jahr 1856] / Paul Kaegbein

    Index Scriptorium Estoniae

    Kaegbein, Paul

    2008-01-01

    Arvustus: Robert Schweitzer. Eine Unveröffentlichte Quelle zur Schulgeschichte von Reval Ferdinand Wiedemanns Geschichte des Revaler Gouvernementsgymnasiums aus dem Jahr 1856. - Buch und Bildung im Baltikum. Münster : LIT, 2005. lk. 495-525. Kubermangugümnaasiumi vanemõpetaja Ferdinand Wiedemann kirjutas 1856. aastal kooli ajaloo, mis mingitel põhjustel jäi avaldamata. Tema tööd on kasutanud 1881. aastal Gotthard von Hansen

  8. Waste treatment by the CCP/EuRec {sup trademark} process; Abfallbehandlung nach dem CCP/EuRec {sup trademark} -Restabfallbehandlungsverfahren

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, A. [CCP GmbH, Waste Management, Merkers (Germany)

    2002-07-01

    The CCP/EuRec {sup trademark} process involves either an aerobic (composting) or an anaerobic (fermentation) biological treatment stage, or a combination of both. [German] Bei dem CCP/EuRec {sup trademark} -Restabfallbehandlungsverfahren handelt es sich um ein leistungsfaehiges System zur biologischen Behandlung von Restabfaellen. Die biologische Behandlungsstufe kann wahlweise aerob (Rotte) oder anaerob (Vergaerung) erfolgen. Eine Kombination zwischen beiden Varianten ist ebenfalls moeglich. (orig.)

  9. Dokumentation der Diskussionsbeiträge auf dem Workshop des DIW Berlin zum Thema "Riester-Rente - Grundlegende Reform dringend geboten!?": [Online-Artikel

    OpenAIRE

    Kornelia Hagen

    2012-01-01

    Dokumentiert wird der Austausch über das Riester-Sparen, der auf dem Workshop des DIW Berlin stattfand. Teilnehmer dieser Veranstaltung waren Wissenschaftler sowie Vertreter aus Wirtschaft und Politik. Die Gespräche fanden entlang von Vorträgen statt. Kontrovers diskutiert wurde über die Förderung, über Auswirkungen der Freiwilligkeit und eines Obligatoriums der privaten Altersvorsorge, über die Akzeptanz des Riester-Sparens unter Geringverdienern, die Transparenz, Kalkulation und Rendite der...

  10. Direct regional quasi-geoid determination using EGM2008 and DEM: A case study for Mainland China and its vicinity areas

    Directory of Open Access Journals (Sweden)

    Jin Li

    2015-11-01

    Full Text Available Earth's gravity model (EGM helps people better determine the figure of Earth, which is generally represented by a global geoid. For a considerable amount of practical applications, people use quasi-geoid to approximate the geoid, thus the quasi-geoid is also treated as an important height datum. In this study we revisit the method to directly determine regional quasi-geoid using EGM and digital elevation model (DEM, on the basis of Molodensky theory. According to the method we obtain a 5′ × 5′ quasi-geoid for Mainland China and its vicinity areas, based on the EGM2008 gravitational potential model and the Shuttle Radar Topography Mission (SRTM DEM model. By comparing height anomalies derived from EGM2008 with observations at 70 GPS/leveling points in areas including northwest, mid-west, mid-east and southeast of China, we find that the 5′ × 5′ EGM2008 quasi-geoid well fits the GPS/leveling results, with average deviations less than 10 cm for the selected areas in east China (with mainly plain topography and ∼20 cm for the selected areas in west China (highland or mountainous areas. We also discuss a few technical issues for directly determining height anomalies based on EGM and DEM, under the frame of Molodensky theory.

  11. The geomorphological evidences of subsidence in the Nile Delta: Analysis of high resolution topographic DEM and multi-temporal satellite images

    Science.gov (United States)

    El Bastawesy, M.; Cherif, O. H.; Sultan, M.

    2017-12-01

    This paper investigates the relevance of landforms to the subsidence of the Nile Delta using a high resolution topographic digital elevation model (DEM) and sets of multi-temporal Landsat satellite images. 195 topographic map sheets produced in 1946 at 1:25,000 scale were digitized, and the DEM was interpolated. The undertaken processing techniques have distinguished all the natural low-lying closed depressions from the artificial errors induced by the interpolation of the DEM. The local subsidence of these depressions from their surroundings reaches a maximum depth of 2.5 m. The regional subsidence of the Nile Delta has developed inverted topography, where the tracts occupied by the contemporary distributary channels are standing at higher elevations than the areas in between. This inversion could be related to the differences in the hydrological and sedimentological properties of underlying sediments, as the channels are underlain by water-saturated sands while the successions of clay and silt on flood plains are prone to compaction. Furthermore, the analysis of remote sensing and topographic data clearly show significant changes in the land cover and land use, particularly in the northern lagoons and adjacent sabkhas, which are dominated by numerous low subsiding depressions. The areas covered by water logging and ponds are increasing on the expense of agricultural areas, and aquaculture have been practiced instead. The precise estimation of subsidence rates and distribution should be worked out to evaluate probable changes in land cover and land use.

  12. An automated, open-source pipeline for mass production of digital elevation models (DEMs) from very-high-resolution commercial stereo satellite imagery

    Science.gov (United States)

    Shean, David E.; Alexandrov, Oleg; Moratto, Zachary M.; Smith, Benjamin E.; Joughin, Ian R.; Porter, Claire; Morin, Paul

    2016-06-01

    We adapted the automated, open source NASA Ames Stereo Pipeline (ASP) to generate digital elevation models (DEMs) and orthoimages from very-high-resolution (VHR) commercial imagery of the Earth. These modifications include support for rigorous and rational polynomial coefficient (RPC) sensor models, sensor geometry correction, bundle adjustment, point cloud co-registration, and significant improvements to the ASP code base. We outline a processing workflow for ˜0.5 m ground sample distance (GSD) DigitalGlobe WorldView-1 and WorldView-2 along-track stereo image data, with an overview of ASP capabilities, an evaluation of ASP correlator options, benchmark test results, and two case studies of DEM accuracy. Output DEM products are posted at ˜2 m with direct geolocation accuracy of process individual stereo pairs on a local workstation, the methods presented here were developed for large-scale batch processing in a high-performance computing environment. We are leveraging these resources to produce dense time series and regional mosaics for the Earth's polar regions.

  13. Mechanical-biological waste conditioning with controlled venting - the Meisenheim mechanical-biological waste conditioning plant; Mechanisch-biologische Restabfallbehandlung nach dem Kaminzugverfahren - MBRA Meisenheim

    Energy Technology Data Exchange (ETDEWEB)

    Hangen, H.O. [Abfallwirtschaftsbetrieb Landkreis Bad Kreuznach, Bad Kreuznach (Germany)

    1998-12-31

    The decision of the rural district of Bad Kreuznach to propose creating facilities for mechanical-biological waste conditioning at the new northern Meisenheim landfill was consistent and correct. It will ensure that the material deposited at this new, state-of-the-art landfill is organically `lean` and can be deposited with a high density. Preliminary sifting of the material prior to depositing safeguards that no improper components are inadvertently included. Three years of operation warrant the statement that waste components that cannot be appropriately biologically conditioned should be eliminated prior to rotting. (orig.) [Deutsch] Die Entscheidung des Landkreises Bad Kreuznach, der neu eingerichteten Norddeponie Meisenheim eine MBRA vorzuschlaten, war auf jeden Fall konsequent und richtig. Es ist damit sicher gestellt, dass in diesem neuen nach dem Stand der Technik eingerichteten Deponiebereich von Anfang an ein Material eingelagert wird, das `organisch abgemagert` ist und mit hoher Einbaudichte eingebaut werden kann. Die Sichtung des gesamten Deponie-Inputs in der Vorsortierhalle gibt ein Stueck Sicherheit, dass keine nicht zugelassenen Stoffe verdeckt dem Ablagerungsbereich der Deponie zugefuehrt werden. Nach mehr als 3 Jahren Betriebszeit kann festgestellt werden, dass biologisch nicht sinnvoll behandelbare Abfallbestandteile vor dem Rotteprozess abgetrennt werden sollten. (orig.)

  14. Contours, This Layer was derived from the USGS National Elevation Dataset (NED) based on 7.5 minute Digital Elevation Model (DEM) image files., Published in 1999, 1:24000 (1in=2000ft) scale, Atlanta Regional Commission.

    Data.gov (United States)

    NSGIC Regional | GIS Inventory — Contours dataset current as of 1999. This Layer was derived from the USGS National Elevation Dataset (NED) based on 7.5 minute Digital Elevation Model (DEM) image...

  15. Entwicklung der Reglementierung von 10 MEM-Berufen im Kontext von Bildungsreformen und dem Wandel in der Arbeitswelt: Eine Kurzstudie im Auftrag von LIBS: Eine Kurzstudie im Auftrag von LIBS Industrielle Berufslehren Schweiz, Baden

    OpenAIRE

    Egg, Maria Esther; Renold, Ursula

    2015-01-01

    Im Auftrag der LIBS Industrielle Berufslehren Schweiz, hat die KOF die Entwicklung von 10 MEM1-Berufsbildern seit dem ersten Berufsbildungsgesetz dargestellt und diese eingebettet in eine kurze Zusammenfassung der wichtigsten Etappenschritte des Schweizer Berufsbildungssystems.

  16. Investigações epidemiológicas sobre demência nos países em desenvolvimento Epidemiological research on dementia in developing countries

    Directory of Open Access Journals (Sweden)

    M Scazufca

    2002-12-01

    Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.As the world population is ageing, dementia becomes an important public health problem, particularly in developing countries. Epidemiological research in these settings is scarce and present additional methodological difficulties, mainly regarding the socio-cultural adequacy of instruments used to identify cases of dementia. As a result of these concerns the 10/66 Dementia Research Group was founded to fill this gap. This is an international network of investigators, mostly from developing countries, and the group's name was based on the paradox that less than 10% of the population-based studies on dementia are directed to 2/3 or more cases of people with dementia living in developing countries. The aim of the paper is to update data in the literature regarding the differences in dementia prevalence and incidence seen in developed and developing countries.

  17. The Influence of DEM Quality on Mapping Accuracy of Coniferous- and Deciduous-Dominated Forest Using TerraSAR‑X Images

    Directory of Open Access Journals (Sweden)

    Gerald Kändler

    2012-03-01

    Full Text Available Climate change is a factor that largely contributes to the increase of forest areas affected by natural damages. Therefore, the development of methodologies for forest monitoring and rapid assessment of affected areas is required. Space-borne synthetic aperture radar (SAR imagery with high resolution is now available for large-scale forest mapping and forest monitoring applications. However, a correct interpretation of SAR images requires an adequate preprocessing of the data consisting of orthorectification and radiometric calibration. The resolution and quality of the digital elevation model (DEM used as reference is crucial for this purpose. Therefore, the primary aim of this study was to analyze the influence of the DEM quality used in the preprocessing of the SAR data on the mapping accuracy of forest types. In order to examine TerraSAR-X images to map forest dominated by deciduous and coniferous trees, High Resolution SpotLight images were acquired for two study sites in southern Germany. The SAR images were preprocessed with a Shuttle Radar Topography Mission (SRTM DEM (resolution approximately 90 m, an airborne laser scanning (ALS digital terrain model (DTM (5 m resolution, and an ALS digital surface model (DSM (5 m resolution. The orthorectification of the SAR images using high resolution ALS DEMs was found to be important for the reduction of errors in pixel location and to increase the classification accuracy of forest types. SAR images preprocessed with ALS DTMs resulted in the highest classification accuracies, with kappa coefficients of 0.49 and 0.41, respectively. SAR images preprocessed with ALS DTMs resulted in greater accuracy than those preprocessed with ALS DSMs in most cases. The classification accuracy of forest types using SAR images preprocessed with the SRTM DEM was fair, with kappa coefficients of 0.23 and 0.32, respectively.Analysis of the radar backscatter indicated that sample plots dominated by coniferous trees

  18. Teatras popieriaus lape: Egono Schiele’s ekspresionistiniai autoportretai | Das Theater auf dem Papierblatt: zu den expressionistischen Selbstbildnissen von Egon Schiele

    Directory of Open Access Journals (Sweden)

    Dalia Kolytaitė

    2004-01-01

    Full Text Available Im Werk von Egon Schiele ist der Körper (besonders sein eigener mit seinen mannigfaltigen Ausdrucksformen ein zentrales Thema. Die stark ausgeprägte und sehr spezifische Körpersprache entwickelte der Künstler vor dem Spiegel, wovon nicht nur biographische Daten, sondern auch Photos zeugen. Mit dem ausdrucksvollen Variieren seines Körpers präsentiert Schiele seine Neigung zum Wechseln der Identität, der Rollen, des Selbst, wobei er sich gleichzeitig in drei Positionen befindet: des Darstellers, des Regisseurs und des Zuschauers.Als Objekt der Analyse wurden die sechs Selbstbildnisse ausgewählt: „Selbstbildnis mit kariertem Hemd“ (1917, „Der Prediger (Selbstbildnis“ (1913, „Der Kämpfer (Selbstbildnis“ (1913, „Sitzender männlicher Akt (Selbstbildnis“ (1917, „Der Tänzer (Selbstbildnis“ (1911, „Männlicher Halbakt mit rotem Lendentuch (Selbstbildnis“ (1914. Sie stellen verschiedene plastischen Konfigurationen des Körpers im Raum dar. Obwohl diese Bilder in unterschiedlichen Jahren entstanden sind, lassen sich alle sechs Selbstbildnisse aufgrund der ähnlichen Darstellungsweise, Manier und derselben Technik als ein Pantomimestück betrachten. Für eine solche Betrachtungsweise spricht nicht nur die visuelle Assoziation – der Körper in allen Bildern stellt gleichsam stillgestellte Fragmente einer Bewegung dar, wie man dies bei den Photoherausgaben von Pantomimen oder beim Drehen eines Stummfilmes (sie haben ja die gleichen Elemente Bild und Bewegung beobachten kann. Den Anstoß für eine solche Behauptung gibt die Kunstgattung der Pantomime selbst. Sie ist ja „die große schweigende Kunst“, „das Spiel des bewusst bewegten Körpers“, „die Kunst der Form“, und das „Material, aus dem diese Form geschaffen wird, ist der menschliche Körper“. Schieles Selbstbildnisse entsprechen ihren Grundforderungen: dem begrenzten Raum, der Beleuchtung, dem eng am Körper anliegenden Kostüm, der sehr pers

  19. 3D DEM simulation and analysis of void fraction distribution in a pebble bed high temperature reactor

    International Nuclear Information System (INIS)

    Yang, Xingtuan; Gui, Nan; Tu, Jiyuan; Jiang, Shengyao

    2014-01-01

    Highlights: • We show a detailed analysis of void fraction (VF) in HTR-10 of China using DEM. • Radial distribution (RD) of VF is uniform in the core and oscillated near the wall. • Axial distribution (AD) is linearly varied along height due to effect of gravity. • Steady RD of VF in the conical base is Gaussian-like, larger than packing bed. • Joint linear and normal distribution of VF is analyzed and explained. - Abstract: The current work analyzes the radial and axial distributions of void fraction of a pebble bed high temperature reactor. A three-dimensional pebble bed corresponding to our test facility of pebble bed type gas-cooled high temperature reactor (HTR-10) in Tsinghua University is simulated via discrete element method, and the radial and axial void fraction profiles are calculated. It validates the oscillating characteristics of radial void fraction near the wall. Detailed calculations show the differences of void fraction profiles between the stationary packing bed and the dynamically discharging bed. Based on the vertically and circumferentially averaged radial distribution and horizontally averaged axial distribution of void fraction, a fully three-dimensional analytical distribution of void fraction throughout the bed is established. The results show the combined effects of gravity and void variation in the pebble bed caused by the pebble discharging. It indicates the linearly increased packing effect caused by gravity in the vertical (axial) direction and the normal distribution of void in the horizontal (radial) direction by pebble drainage. These two effects coexist in the conical base of the bed whereas only the former effect exists in the cylindrical volume of the bed

  20. Römerzeitliche keramik aus dem nordöstlichen Turm der Römerstadt Horreum Margi

    Directory of Open Access Journals (Sweden)

    Petković Sofija

    2011-01-01

    Full Text Available Ćuprija, die ehemalige Römerstadt Horreum Margi, liegt im zentralen Teil Serbiens, an der Mündung des Flusses Ravanica in die Morava. Der Ort war ein Militärlager und spielte eine wichtige Rolle als Sammlungszentrum der Römerprovinz Moesia Superior (Moesia Prima. Zwischen 1986 und 1990 fanden die Ausgrabungen von Horreum Margi statt. Dabei wurden der Innenraum der spätrömischen Festung, die nördliche Mauer und der nordöstliche Turm erforscht. Während der Ausgrabung im Turm wurden unterschiedliche Keramiktypen entdeckt. Schüsseln (acht Typen bilden dabei die Mehrheit. Danach kommen Töpfe (sieben Typen, Amphoren (zwei Typen, Krüge (zwei Typen, Deckel (ein Typ und Becher (ein Typ. Sie gehören alle zu einer komplexen spätrömerzeitlichen Typologie, die für diese Fundstelle erstellt wurde und entsprechen zu den restlichen Keramiktypen, die im Festungsinneren und entlang der Nordmauer ausgegraben kamen. Der Text bietet einen Überblick aller Keramiktypen an, die im nordöstlichen Turm der Römerfestung Horreum Margi entdeckt wurden. [Projekat Ministarstva nauke Republike Srbije, br. 177007: Romanisierung, Urbanisierung und Transformation städtischer Zentren vomzivilen, militärischen und Wohnungscharakter in den römischen Provinzen auf dem Territorium Serbiens i br. 177007: Viminacium dierömische Stadt und Militärlager-Forschung der materiellen und geistigen Hinterlassenschaft mit der Verwendung moderner Technologien: Ferndetektion, Geophysik, Gis Digitalisierung und 3.D Visualisierung

  1. Modeling Change of Topographic Spatial Structures with DEM Resolution Using Semi-Variogram Analysis and Filter Bank

    Directory of Open Access Journals (Sweden)

    Chunmei Wang

    2016-06-01

    Full Text Available In this paper, the way topographic spatial information changes with resolution was investigated using semi-variograms and an Independent Structures Model (ISM to identify the mechanisms involved in changes of topographic parameters as resolution becomes coarser or finer. A typical Loess Hilly area in the Loess Plateau of China was taken as the study area. DEMs with resolutions of 2.5 m and 25 m were derived from topographic maps with map scales of 1:10,000 using ANUDEM software. The ISM, in which the semi-variogram was modeled as the sum of component semi-variograms, was used to model the measured semi-variogram of the elevation surface. Components were modeled using an analytic ISM model and corresponding landscape components identified using Kriging and filter bank analyses. The change in the spatial components as resolution became coarser was investigated by modeling upscaling as a low pass linear filter and applying a general result to obtain an analytic model for the scaling process in terms of semi-variance. This investigation demonstrated how topographic structures could be effectively characterised over varying scales using the ISM model for the semi-variogram. The loss of information in the short range components with resolution is a major driver for the observed change in derived topographic parameters such as slope. This paper has helped to quantify how information is distributed among scale components and how it is lost in natural terrain surfaces as resolution becomes coarser. It is a basis for further applications in the field of geomorphometry.

  2. Sick building syndrome - results of the 'Proklima' research project; Befindlichkeitsstoerungen in Buerogebaeuden - Ergebnisse aus dem Proklima Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Kruppa, B. [Bundesindustrieverband Heizungs-, Klima-, Sanitaertechnik und Technische Gebaeudesysteme e.V., Bonn (Germany); Bischof, W.; Brasche, S. [Arbeitsgruppe Raumklimatologie der FSU Jena (ARK), Erfurt (Germany); Bullinger-Naber, M. [Hamburg Univ. (Germany). Abt. fuer Medizinische Psychologie; Mayer, E. [Fraunhofer-Institut fuer Bauphysik, Holzkirchen (Germany); Gebhardt, H. [Wuppertal Univ. (Gesamthochschule) (Germany). Inst. fuer Arbeitsmedizin, Sicherheitstechnik und Ergonomie

    2000-07-01

    In the world's biggest research project, the sick building syndrome was investigated in Germany between 1995 and 1999. In all, 8 air-conditioned buildings and 6 non-air-conditioned buildings, 40 space HVAC systems and 1497 places of work were analyzed, and 4,500 persons were asked to provide data. For the first time ever, measured physical, biological and chemical data were compared with the subjective data provided by the inquiry forms. It was found that the concentrations and hygienic status of air conditioning systems do have an effect on subjective comfort. Buildings with well-designed and well-serviced space HVAC systems had better results than buildings without air conditioning systems. However, it is the psychosocial environment and the job description of building inhabitants that decide their response in terms of sick building syndrome. Factors like gender, job satisfaction, job specifications and educational level are more important than space HVAC systems. [German] Im Rahmen eines der weltweit groessten Forschungsprojekte zum Thema 'Sick Building Syndrome' wurden in Deutschland zwischen 1995 und 1999 umfangreiche Untersuchungen durchgefuehrt mit dem Ziel, die Ursachen und Folgen von Befindlichkeitsstoerungen in Buerogebaeuden zu ermitteln. Insgesamt wurden 8 klimatisierte und 6 nicht klimatisierte Gebaeude, 40 raumlufttechnische Anlagen und 1497 Arbeitsplaetze untersucht sowie ueber 4.500 Personen befragt. Die Ergebnisse erlauben zum ersten Mal einen direkten Vergleich der gemessenen physikalischen, biologischen und chemischen Werte mit den subjektiven Angaben (Fragebogendaten) an klimatisierten und nicht klimatisierten Arbeitsplaetzen. Die Auswertung zeigt, dass die Konzentration der Anlagen und deren hygienischer Wartungszustand einen Einfluss auf die Befindlichkeit der Mitarbeiter haben. Gebaeude mit gut geplanten und gewarteten RLT-Anlagen schneiden in der Bewertung sogar besser ab als nicht klimatisierte Gebaeude. Die groessten

  3. Forest biomass mapping from fusion of GEDI Lidar data and TanDEM-X InSAR data

    Science.gov (United States)

    Qi, W.; Hancock, S.; Armston, J.; Marselis, S.; Dubayah, R.

    2017-12-01

    Mapping forest above-ground biomass (hereafter biomass) can significantly improve our ability to assess the role of forest in terrestrial carbon budget and to analyze the ecosystem productivity. Global Ecosystem Dynamic Investigation (GEDI) mission will provide the most complete lidar observations of forest vertical structure and has the potential to provide global-scale forest biomass data at 1-km resolution. However, GEDI is intrinsically a sampling mission and will have a between-track spacing of 600 m. An increase in adjacent-swath distance and the presence of cloud cover may also lead to larger gaps between GEDI tracks. In order to provide wall-to-wall forest biomass maps, fusion algorithms of GEDI lidar data and TanDEM-X InSAR data were explored in this study. Relationship between biomass and lidar RH metrics was firstly developed and used to derive biomass values over GEDI tracks which were simulated using airborne lidar data. These GEDI biomass values were then averaged in each 1-km cell to represent the biomass density within that cell. Whereas for cells without any GEDI observations, regression models developed between GEDI-derived biomass and TDX InSAR variables were applied to predict biomass over those places. Based on these procedures, contiguous biomass maps were finally generated at 1-km resolution over three representative forest types. Uncertainties for these biomass maps were also estimated at 1 km following methods developed in Saarela et al. (2016). Our results indicated great potential of GEDI/TDX fusion for large-scale biomass mapping. Saarela, S., Holm, S., Grafstrom, A., Schnell, S., Naesset, E., Gregoire, T.G., Nelson, R.F., & Stahl, G. (2016). Hierarchical model-based inference for forest inventory utilizing three sources of information. Annals of Forest Science, 73, 895-910

  4. Recent Elevation Changes on Bagley Ice Valley, Guyot and Yahtse Glaciers, Alaska, from ICESat Altimetry, Star-3i Airborne, and SRTM Spaceborne DEMs

    Science.gov (United States)

    Muskett, R. R.; Sauber, J. M.; Lingle, C. S.; Rabus, B. T.; Tangborn, W. V.; Echelmeyer, K. A.

    2005-12-01

    Three- to 5-year surface elevation changes on Bagley Ice Valley, Guyot and Yahtse Glaciers, in the eastern Chugach and St. Elias Mtns of south-central Alaska, are estimated using ICESat-derived data and digital elevation models (DEMs) derived from interferometric synthetic aperture radar (InSAR) data. The surface elevations of these glaciers are influenced by climatic warming superimposed on surge dynamics (in the case of Bagley Ice Valley) and tidewater glacier dynamics (in the cases of Guyot and Yahtse Glaciers) in this coastal high-precipitation regime. Bagley Ice Valley / Bering Glacier last surged in 1993-95. Guyot and Yahtse Glaciers, as well as the nearby Tyndell Glacier, have experienced massive tidewater retreat during the past century, as well as during recent decades. The ICESat-derived elevation data we employ were acquired in early autumn in both 2003 and 2004. The NASA/NIMA Shuttle Radar Topography Mission (SRTM) DEM that we employ was derived from X-band InSAR data acquired during this 11-22 Feb. 2000 mission and processed by the German Aerospace Center. This DEM was corrected for estimated systematic error, and a mass balance model was employed to account for seasonal snow accumulation. The Star-3i airborne, X-band, InSAR-derived DEM that we employ was acquired 4-13 Sept. 2000 by Intermap Technologies, Inc., and was also processed by them. The ICESat-derived profiles crossing Bagley Ice Valley, differenced with Star-3i DEM elevations, indicate preliminary mean along-profile elevation increases of 5.6 ± 3.4 m at 1315 m altitude, 7.4 ± 2.7 m at 1448 m altitude, 4.7 ± 1.9 m at 1557 m altitude, 1.3 ± 1.4 m at 1774 m altitude, and 2.5 ± 1.5 m at 1781 m altitude. This is qualitatively consistent with the rising surface on Bagley Ice Valley observed by Muskett et al. [2003]. The ICESat-derived profiles crossing Yahtse Glacier, differenced with the SRTM DEM elevations, indicate preliminary mean elevation changes (negative implies decrease) of -0.9 ± 3

  5. DEM Particle Fracture Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Boning [Univ. of Colorado, Boulder, CO (United States); Herbold, Eric B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Homel, Michael A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Regueiro, Richard A. [Univ. of Colorado, Boulder, CO (United States)

    2015-12-01

    An adaptive particle fracture model in poly-ellipsoidal Discrete Element Method is developed. The poly-ellipsoidal particle will break into several sub-poly-ellipsoids by Hoek-Brown fracture criterion based on continuum stress and the maximum tensile stress in contacts. Also Weibull theory is introduced to consider the statistics and size effects on particle strength. Finally, high strain-rate split Hopkinson pressure bar experiment of silica sand is simulated using this newly developed model. Comparisons with experiments show that our particle fracture model can capture the mechanical behavior of this experiment very well, both in stress-strain response and particle size redistribution. The effects of density and packings o the samples are also studied in numerical examples.

  6. Papilødem

    DEFF Research Database (Denmark)

    Kromann Nielsen, Marianne; Hamann, Steffen

    2015-01-01

    refers to optic disc oedema as a consequence of elevated intracranial pressure. It is usually a bilateral condition and visual function is preserved until late. Optic disc oedema caused by an anterior optic neuropathy is usually unilateral and accompanied by the loss of visual function.......Optic disc oedema describes the nonspecific, localized swelling of the optic nerve head regardless of aetiology. Therefore, differentiating among the various aetiologies depends on a thorough history and knowledge of the clinical characteristics of the underlying conditions. Papilloedema strictly...

  7. DEM - distribution energy management

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A; Kekkonen, V; Koreneff, G [VTT Energy, Espoo (Finland); and others

    1998-08-01

    The electricity market was de-regulated in Finland at the end of 1995 and the customers can now freely choose their power suppliers. The national grid and local distribution network operators are now separated from the energy business. The network operators transmit the electric power to the customers on equal terms regardless from whom the power is purchased. The Finnish national grid is owned by one company Finnish Power Grid PLC (Fingrid). The major shareholders of Fingrid are the state of Finland, two major power companies and institutional investors. In addition there are about 100 local distribution utilities operating the local 110 kV, 20 kV and 0.4 kV networks. The distribution utilities are mostly owned by the municipalities and towns. In each network one energy supplier is always responsible for the hourly energy balance in the network (a `host`) and it also has the obligation to provide public energy prices accessible to any customer in the network`s area. The Finnish regulating authorities nominate such a supplier who has a dominant market share in the network`s area as the supplier responsible for the network`s energy balance. A regulating authority, called the Electricity Market Centre, ensures that the market is operating properly. The transmission prices and public energy prices are under the Electricity Market Centre`s control. For domestic and other small customers the cost of hourly metering (ca. 1000 US$) would be prohibitive and therefore the use of conventional energy metering and load models is under consideration by the authorities. Small customer trade with the load models (instead of the hourly energy recording) is scheduled to start in the first half of 1998. In this presentation, the problems of energy management from the standpoint of the energy trading and distributing companies in the new situation are first discussed. The topics covered are: the hourly load data management, the forecasting and estimation of hourly energy demands, optimization of energy production, short-term trade management, retail tariff design and planning of power purchase from the markets

  8. Papilødem

    DEFF Research Database (Denmark)

    Kromann Nielsen, Marianne; Hamann, Steffen

    2015-01-01

    Optic disc oedema describes the nonspecific, localized swelling of the optic nerve head regardless of aetiology. Therefore, differentiating among the various aetiologies depends on a thorough history and knowledge of the clinical characteristics of the underlying conditions. Papilloedema strictly...... refers to optic disc oedema as a consequence of elevated intracranial pressure. It is usually a bilateral condition and visual function is preserved until late. Optic disc oedema caused by an anterior optic neuropathy is usually unilateral and accompanied by the loss of visual function....

  9. Famulaturreife: Eine Idee auf dem Prüfstand [Clerkship maturity: Does the idea of training clinical skills work?

    Directory of Open Access Journals (Sweden)

    Stosch, Christoph

    2011-08-01

    Full Text Available [english] Background: With the reformed curriculum “4C”, the Medical Faculty of the University of Cologne has started to systematically plan practical skills training, for which Clerkship Maturity is the first step. The key guidelines along which the curriculum was development were developed by experts. This approach has now been validated. Materials and methods: Both students and teachers were asked to fill in a questionnaire regarding preclinical practical skills training to confirm the concept of Clerkship Maturity. Results and discussion: The Cologne training program Clerkship Maturity can be validated empirically overall through the activities of the students awaiting the clerkship framework and through the evaluation by the medical staff providing the training. The subjective ratings of the advantages of the training by the students leave room for improvement. Apart from minor improvements to the program, the most likely solution providing sustainable results will involve an over-regional strategy for establishing skills training planned as part of the curriculum.[german] Hintergrund: Mit dem Modellstudiengang Humanmedizin hat die Medizinische Fakultät der Universität zu Köln begonnen, die praktische Ausbildung, deren erster Schritt die „Famulaturreife“ ist, systematisch zu planen. Dabei wurden die handlungsleitenden Strukturen, entlang derer das Curriculum entwickelt wurde, auf Experteneinschätzung basierend entworfen. Dieses Vorgehen wurde nun einer Validierung unterworfen.Material und Methode: Sowohl Studierende als auch Lehrende wurden mit einem Fragebogen zur Ausbildung in Praktischen Fertigkeiten konfrontiert, um das Konstrukt „Famulaturreife“ zu bestätigen. Ergebnisse und Diskussion: Das Kölner Ausbildungsprogramm zur „Famulaturreife“ kann insgesamt empirisch durch die Tätigkeiten der Studierenden im Rahmen der Famulatur sowie durch die Einschätzung seitens der ausbildenden Ärzte bestätigt werden. Der

  10. Coupled LBM-DEM Three-phase Simulation on Seepage of CO2 Stored under the Seabed.

    Science.gov (United States)

    Kano, Y.; Sato, T.

    2017-12-01

    Concerning the seepage of CO2 stored in a subsea formation, CO2 bubble/droplet rises to the sea-surface dissolving into the seawater, and the acidification of local seawater will be a problem. Previous research indicated that seepage rate and bubble size significantly affect its behaviour (Kano et al., 2009; Dewar et al., 2013). On the other hand, Kawada's experiments (2014) indicated that grain size affects formation of gas channels and bubbles through granular media. CO2 seepage through marine sediments probably shows similar behaviour. Additionally, such mobilisation and displacement of sand grains by gas migration may also cause capillary fracturing of CO2 in the reservoir and seal. To predict these phenomena, it is necessary to reveal three-phase behaviour of gas-water-sediment grains. We built gas-liquid-solid three-phase flow 3D simulator by coupling LBM-DEM program, and simulation results showed that the mobilisation of sand grain forms gas channels and affects bubble formation compared with that through solid porous media (Kano and Sato, 2017). In this presentation, we will report simulation results on effects of porosity, grain size and gas flow rate on the formation of gas channels and bubble and their comparison with laboratory experimental data. The results indicate that porosity and grain size of sand gravels affect the width of formed gas channels and resulting formed bubble size on the order of supposed seepage rate in the CO2 storage and that in most of experiment's conditions. References: Abe, S., Place, D., Mora, P., 2004. Pure. Appl. Geophys., 161, 2265-2277. (accessed Aug 01, 2017). Dewar, M., Wei, W., McNeil, D., Chen, B., 2013. Marine Pollution Bulletin 73(2), 504-515. Kano, Y., Sato, T., Kita, J., Hirabayashi, S., Tabeta, S., 2009. Int. J. Greenhouse Gas Control, Vol. 3(5), 617-625. Kano, Y. and Sato, T., 2017. In Proceeding of GHGT-13, Lausanne, Switzerland, Nov. 14-18, 2016. Kawada, R. 2014. Graduation thesis. Faculty of Engineering, The

  11. Study of Morphologic Change in Poyang Lake Basin Caused by Sand Dredging Using Multi-temporal Landsat Images and DEMs

    Science.gov (United States)

    Qi, S.; Zhang, X.; Wang, D.; Zhu, J.; Fang, C.

    2014-11-01

    Sand dredging has been practiced in rivers, lakes, harbours and coastal areas in recent years in China mostly because of demand from construction industry as building material. Sand dredging has disturbed aquatic ecosystems by affecting hydrological processes, increasing content of suspended sediments and reducing water clarity. Poyang Lake, connecting with Yangtze River in the lower reaches of the Yangtze River, is the largest fresh water lake in China. Sand dredging in Poyang Lake has been intensified since 2001 because such practice was banned in Yangtze River and profitable. In this study, the morphologic change caused by sand dredging in Poyang Lake basin was analysed by overlaying two DEMs acquired in 1952 and 2010 respectively. Since the reflectance of middle infrared band for sand dredging vessel is much higher than that of water surface, sand dredging vessels were showed as isolated grey points and can be counted in the middle infrared band in 12 Landsat images acquired in flooding season during 2000~2010. Another two Landsat images (with low water level before 2000 and after 2010) were used to evaluate the morphologic change by comparing inundation extent and shoreline shape. The following results was obtained: (1) vessels for sand dredging are mainly distributed in the north of Poyang Lake before 2007, but the dredging area was enlarged to the central region and even to Gan River; (2) sand dredging area reached to about 260.4 km2 and is mainly distributed in the north of Songmen Mountain and has been enlarged to central of Poyang Lake from the distribution of sand vessels since 2007. Sand dredged from Poyang Lake was about 1.99 × 109 m3 or 2448 Mt assuming sediment bulk density of 1.23 t m-3. It means that the magnitude of sand mining during 2001-2010 is almost ten times of sand depositions in Poyang Lake during 1955-2010; (3) Sand dredging in Poyang Lake has alternated the lake capacity and discharge section area, some of the watercourse in the

  12. Intercomparison of DEM-based approaches for the identification of flood-prone areas in different geomorphologic and climatic conditions

    Science.gov (United States)

    Samela, Caterina; Nardi, Fernando; Grimaldi, Salvatore; De Paola, Francesco; Sole, Aurelia; Manfreda, Salvatore

    2014-05-01

    Floods represent the most critical natural hazard for many countries and their frequency appears to be increasing in recent times. The legal constraints of public administrators and the growing interest of private companies (e.g., insurance companies) in identifying the areas exposed to the flood risk, is determining the necessity of developing new tools for the risk classification over large areas. Nowadays, among the numerous hydrologic and hydraulic methods regularly used for practical applications, 2-D hydraulic modeling represents the most accurate approach for deriving detailed inundation maps. Nevertheless, data requirement for these modeling approaches is certainly onerous, limiting their applicability over large areas. On this issue, the terrain morphology may provide an extraordinary amount of information useful to detect areas that are particularly prone to serious flooding. In the present work, we compare the reliability of different DEM-derived quantitative morphologic descriptors in characterizing the relationships between geomorphic attributes and flood exposure. The tests are carried out using techniques of pattern classification, such as linear binary classifiers (Degiorgis et al., 2012), whose ability is evaluated through performance measures. Simple and composed morphologic features are taken into account. The morphological features are: the upslope contributing area (A), the local slope (S), the length of the path that hydrologically connects the location under exam to the nearest element of the drainage network (D), the difference in elevation between the cell under exam and the final point of the same path (H), the curvature (downtriangle2H). In addition to the mentioned features, the study takes into consideration a number of composed indices, such as: the modified topographic index (Manfreda et al., 2011), the downslope index (DI) proposed by Hjerdt et al. (2004), the ratio between the elevation difference H and the distance to the network D

  13. Reevaluation of 1935 M 7.0 earthquake fault, Miaoli-Taichung Area, western Taiwan: a DEM and field study

    Science.gov (United States)

    Lin, Y. N.; Chen, Y.; Ota, Y.

    2003-12-01

    A large earthquake (M 7.0) took place in Miaoli area, western Taiwan on April 21st, 1935. Right to its south is the 1999 Chi-Chi earthquake fault, indicating it is not only tectonically but seismically active. As the previous study, the study area is located in the mature zone of a tectonic collision that occurred between Philippine sea Plate and Eurasia continental Plate. The associated surface ruptures of 1935 earthquake daylighted Tungtsichiao Fault, a tear fault trending NE in the south and Chihhu Fault, a back thrust trending N-S in the north, but no ruptures occurred in between. Strike-slip component was identified by the horizontal offset observed along Tungtsichiao Fault; however, there are still disputes on the reported field evidence. Our purposes are (1) to identify the structural behaviors of these two faults, (2) to find out what the seismogenic structure is, and (3) to reconstruct the regional geology by information given by this earthquake. By DEM interpretation and field survey, we can clearly recognize a lot of the 1935 associated features. In the west of Chihhu Fault, a series of N-S higher terraces can be identified with eastward tilted surfaces and nearly 200 m relative height. Another lower terrace is also believed being created during the 1935 earthquake, showing an east-facing scarp with a height of ca. 1.5~2 m. Outcrop investigation reveals that the late-Miocene bedrock has been easterly thrusted over the Holocene conglomerates, indicating a west-dipping fault plane. The Tungtsichiao Fault cuts through a lateritic terrace at Holi, which is supposed developed in Pleistocene. The fault scarp is only discernible in the northeastern ending. Other noticeable features are the fault related antiforms that line up along the surface rupture. There is no outcrop to show the fault geometry among bedrocks. We re-interpret the northern Chihhu Fault as the back thrust generated from a main subsurface detachment, which may be the actual seismogenic fault

  14. Systematic Analysis of Rocky Shore Morphology along 700km of Coastline Using LiDAR-derived DEMs

    Science.gov (United States)

    Matsumoto, H.; Dickson, M. E.; Masselink, G.

    2016-12-01

    Rock shore platforms occur along much of the world's coast and have a long history of study; however, uncertainty remains concerning the relative importance of various formative controls in different settings (e.g. wave erosion, weathering, tidal range, rock resistance, inheritance). Ambiguity is often attributed to intrinsic natural variability and the lack of preserved evidence on eroding rocky shores, but it could also be argued that previous studies are limited in scale, focusing on a small number of local sites, which restricts the potential for insights from broad, regional analyses. Here we describe a method, using LiDAR-derived digital elevation models (DEMs), for analysing shore platform morphology over an unprecedentedly wide area in which there are large variations in environmental conditions. The new method semi-automatically extracts shore platform profiles and systematically conducts morphometric analysis. We apply the method to 700 km of coast in the SW UK that is exposed to (i) highly energetic swell waves to local wind waves, (ii) macro to mega tidal ranges, and (iii) highly resistant igneous rocks to moderately hard sedimentary rocks. Computer programs are developed to estimate mean sea level, mean spring tidal range, wave height, and rock strength along the coastline. Filtering routines automatically select and remove profiles that are unsuitable for analysis. The large data-set of remaining profiles supports broad and systematic investigation of possible controls on platform morphology. Results, as expected, show wide scatter, because many formative controls are in play, but several trends exist that are generally consistent with relationships that have been inferred from local site studies. This paper will describe correlation analysis on platform morphology in relation to environmental conditions and also present a multi-variable empirical model derived from multi linear regression analysis. Interesting matches exist between platform gradients

  15. Capturing poromechanical coupling effects of the reactive fracturing process in porous rock via a DEM-network model

    Science.gov (United States)

    Ulven, Ole Ivar; Sun, WaiChing

    2016-04-01

    Fluid transport in a porous medium has important implications for understanding natural geological processes. At a sufficiently large scale, a fluid-saturated porous medium can be regarded as a two-phase continuum, with the fluid constituent flowing in the Darcian regime. Nevertheless, a fluid mediated chemical reaction can in some cases change the permeability of the rock locally: Mineral dissolution can cause increased permeability, whereas mineral precipitation can reduce the permeability. This might trigger a complicated hydro-chemo-mechanical coupling effect that causes channeling of fluids or clogging of the system. If the fluid is injected or produced at a sufficiently high rate, the pressure might increase enough to cause the onset and propagation of fractures. Fractures in return create preferential flow paths that enhance permeability, localize fluid flow and chemical reaction, prevent build-up of pore pressure and cause anisotropy of the hydro-mechanical responses of the effective medium. This leads to a complex coupled process of solid deformation, chemical reaction and fluid transport enhanced by the fracture formation. In this work, we develop a new coupled numerical model to study the complexities of feedback among fluid pressure evolution, fracture formation and permeability changes due to a chemical process in a 2D system. We combine a discrete element model (DEM) previously used to study a volume expanding process[1, 2] with a new fluid transport model based on poroelasticity[3] and a fluid-mediated chemical reaction that changes the permeability of the medium. This provides new insights into the hydro-chemo-mechanical process of a transforming porous medium. References [1] Ulven, O. I., Storheim, H., Austrheim, H., and Malthe-Sørenssen, A. "Fracture Initiation During Volume Increasing Reactions in Rocks and Applications for CO2 Sequestration", Earth Planet. Sc. Lett. 389C, 2014a, pp. 132 - 142, doi:10.1016/j.epsl.2013.12.039. [2] Ulven, O. I

  16. Determination of the hydrological properties of a small-scale catchment area in Northern Greece from ASTER and SRTM DEMs and accuracy assessment with a local DTM

    Science.gov (United States)

    Tzanou, E. A.; Vergos, G. S.

    2012-04-01

    The combined use of Geographic Information Systems and recent high-resolution Digital Elevation Models (DEMs) from Remote Sensing imagery offers a unique opportunity to study the hydrological properties of basin and catchment dynamics and derive the hydrological features of specific regions of various spatial scales. Until recently, the availability of global DEMs was restricted to low-resolution and accuracy models, e.g., ETOPO5, ETOPO2 and GTOPO30, compared to local Digital Terrain Models (DTMs) derived from photogrammetric methods and offered usually in the form of topographic maps of various scales. The advent of the SRTM and ASTER missions, offer some new tools and opportunities in order to use their data within a GIS to study the hydrological properties of basins and consequently validate their performance both amongst each other, as well as in terms of the results derived from a local DTM. The present work focuses on the use of the recent SRTM v2 90 m and ASTER v2 30 m DEMs along with the national 500 m DTM generated by the Hellenic Military Geographic Service (HMGS), within a GIS in order to assess their performance in determining the hydrological properties of basins. To this respect, the ArcHydro extension tool of ArcGIS v9.3 and HEC-GeoRAS v4.3 have been exploited to determine the hydrographic data of the basins under study which are located in Northern Greece. The hydrological characteristics refer to stream geometry, curve number, flooding areas, etc. as well as the topographic characteristics of the basin itself, such as aspect, hillshade, slope e.t.c..

  17. Ice shelf melt rates in Greenland and Antarctica using time-tagged digital imagery from World View and TanDEM-X

    Science.gov (United States)

    Charolais, A.; Rignot, E. J.; Milillo, P.; Scheuchl, B.; Mouginot, J.

    2017-12-01

    The floating extensions of glaciers, or ice shelves, melt vigorously in contact with ocean waters. Melt is non uniform, with the highest melt taking place in the deepest part of the cavity, where thermal forcing is the greatest because of 1) the pressure dependence of the freezing point of the seawater/ice mixture and 2) subglacial water injects fresh, buoyant, cold melt water to fuel stronger ice-ocean interactions. Melt also forms along preferential channels, which are not stationary, and create lines of weakness in the shelf. Ice shelf melt rates have been successfully measured from space over the entire Antarctic continent and on the ice shelves in Greenland using an Eulerian approach that combines ice thickness, ice velocity vectors, surface mass balance data, and measurements of ice thinning rates. The Eulerian approach is limited by the precision of the thickness gradients, typically of a few km, and requires significant spatial averaging to remove advection effects. A Lagrangian approach has been shown to be robust to advection effects and provides higher resolution details. We implemented a Lagrangian methodology for time-tagged World View DEMs by the Polar Geoscience Center (PGS) at the University of Minnesota and time-tagged TanDEM-X DEMs separated by one year. We derive melt rates on a 300-m grid with a precision of a few m/yr. Melt is strongest along grounding lines and along preferred channels. Channels are non-stationary because melt is not the same on opposite sides of the channels. Examining time series of data and comparing with the time-dependent grounding line positions inferred from satellite radar interferometry, we evaluate the magnitude of melt near the grounding line and even within the grounding zone. A non-zero melt rate in the grounding zone has vast implications for ice sheet modeling. This work is funded by a grant from NASA Cryosphere Program.

  18. The Multi-Instrument (EVE-RHESSI) DEM for Solar Flares, and Implications for Residual Non-Thermal Soft X-Ray Emission

    Science.gov (United States)

    McTiernan, James M.; Caspi, Amir; Warren, Harry

    2015-04-01

    In the soft X-ray energy range, solar flare spectra are typically dominated by thermal emission. The low energy extent of non-thermal emission can only be loosely quantified using currently available X-ray data. To address this issue, we combine observations from the EUV Variability Experiment (EVE) on-board the Solar Dynamics Observatory (SDO) with X-ray data from the Reuven Ramaty High Energy Spectroscopic Imager (RHESSI). The improvement over the isothermal approximation is intended to resolve the ambiguity in the range where the thermal and non-thermal components may have similar photon fluxes. This "crossover" range can extend up to 30 keV for medium to large solar flares.Previous work (Caspi et.al. 2014ApJ...788L..31C) has concentrated on obtaining DEM models that fit both instruments' observations well. Now we are interested in any breaks and cutoffs in the "residual" non-thermal spectrum; i.e., the RHESSI spectrum that is left over after the DEM has accounted for the bulk of the soft X-ray emission. Thermal emission is again modeled using a DEM that is parametrized as multiple gaussians in temperature; the non-thermal emission is modeled as a photon spectrum obtained using a thin-target emission model ('thin2' from the SolarSoft Xray IDL package). Spectra for both instruments are fit simultaneously in a self-consistent manner. The results for non-thermal parameters then are compared with those found using RHESSI data alone, with isothermal and double-thermal models.

  19. Tracking and evolution of irrigation triggered active landslides by multi-source high resolution DEM: The Jiaojiacun landslide group of Heifangtai (Northwest of China)

    Science.gov (United States)

    Zeng, Runqiang; Meng, Xingmin; Wang, Siyuan; Chen, Guan; Lee, Yajun; Zhang, Yi

    2014-05-01

    The construction of three large hydropower stations, i.e. Liujia, Yanguo and Bapan, resulted in the immigration of the impacted people to Heifangtai from 1960s. To support the living and farming of the immigrated people, a large amount of water has been pumped from the Yellow River to Heifangtai, which has changed the former underground water budget and led to 111 landslides from 1968 in this area. To reveal the deformation process of landslides in Heifangtai, a quantitative deformation analysis model of landslide based on multi-source DEM data is established using four periods of topographic maps obtained in 1970, 2001, 2010 and 2013 respectively, including two 1:10000 topographic maps and two 1:1000 data acquired from 3D Laser Scanner. The whole study area was divided into two sections based on the two distinct kinds of landslide patterns. The selected morphometric parameters, residual topographic surface and surface roughness, extracted from three typical landslides, and the statistical analysis (Box-plot diagrams) of the temporal variations of these parameters, allowed the reconstruction and tracking of these landslides. We monitored the changing of landslide boundaries, average vertical and horizontal displacement rates and zones of uplift and subsidence. The volumes of removed and/or accumulated material were estimated as well. We can then demonstrate the kinematics of landslides based on information from high-resolution DEM, and the changing table of underground water, ring-shear test and soil-water characteristic curve referenced from other researchers. The results provide a new insight on the use of multi-source high resolution DEM in the monitoring of irrigation-triggered landslides.

  20. Multi-Annual Kinematics of an Active Rock Glacier Quantified from Very High-Resolution DEMs: An Application-Case in the French Alps

    Directory of Open Access Journals (Sweden)

    Xavier Bodin

    2018-04-01

    Full Text Available Rock glaciers result from the long-term creeping of ice-rich permafrost along mountain slopes. Under warming conditions, deformation is expected to increase, and potential destabilization of those landforms may lead to hazardous phenomena. Monitoring the kinematics of rock glaciers at fine spatial resolution is required to better understand at which rate, where and how they deform. We present here the results of several years of in situ surveys carried out between 2005 and 2015 on the Laurichard rock glacier, an active rock glacier located in the French Alps. Repeated terrestrial laser-scanning (TLS together with aerial laser-scanning (ALS and structure-from-motion-multi-view-stereophotogrammetry (SFM-MVS were used to accurately quantify surface displacement of the Laurichard rock glacier at interannual and pluri-annual scales. Six very high-resolution digital elevation models (DEMs, pixel size <50 cm of the rock glacier surface were generated, and their respective quality was assessed. The relative horizontal position accuracy (XY of the individual DEMs is in general less than 2 cm with a co-registration error on stable areas ranging from 20–50 cm. The vertical accuracy is around 20 cm. The direction and amplitude of surface displacements computed between DEMs are very consistent with independent geodetic field measurements (e.g., DGPS. Using these datasets, local patterns of the Laurichard rock glacier kinematics were quantified, pointing out specific internal (rheological and external (bed topography controls. The evolution of the surface velocity shows few changes on the rock glacier’s snout for the first years of the observed period, followed by a major acceleration between 2012 and 2015 affecting the upper part of the tongue and the snout.

  1. Quality Assessment of Surface Current Fields From TerraSAR-X and TanDEM-X Along-Track Interferometry and Doppler Centroid Analysis

    OpenAIRE

    Romeiser, Roland; Runge, Harmut; Suchandr, Steffan; Kahle, Ralph; Rossi, Cristian; Bell, Paul S.

    2014-01-01

    All existing examples of current measurements by spaceborne synthetic aperture radar (SAR) along-track (AT) interferometry (ATI) have suffered from short baselines and corresponding low sensitivities. Theoretically, the best data quality at X-band is expected at effective baselines on the order of 30 m, i.e., 30 times as long as the baselines of the divided-antenna modes of TerraSAR-X. In early 2012, we had a first opportunity to obtain data at near-optimum baselines from the TanDEM-X satelli...

  2. Dementia and mild cognitive impairment in patients with Parkinson's disease Demência e transtorno cognitivo leve em pacientes com doença de Parkinson

    Directory of Open Access Journals (Sweden)

    Gloria Maria Almeida Souza Tedrus

    2009-06-01

    Full Text Available The objective of this research was to assess the occurrence of cognitive impairment in 32 individuals (average age: 67.2 years old with Parkinson' disease (PD. Procedures: clinical-neurological assessment; modified Hoehn and Yahr staging scale (HYS; standard neuropsychological battery of CERAD (Consortium to Establish a Registry for Alzheimer' Disease; Pfeffer questionnaire; and Clinical Dementia Rating. A comparison was made with a control group (CG, consisting of 26 individuals with similar age and educational level but without cognitive impairment. The PD patients showed an inferior performance in the CERAD battery when compared to the CG. Three PD sub-groups were characterised according to cognition: no cognitive impairment - 15 cases; mild cognitive impairment - 10; dementia - 7 cases. There was a significant association between motor disability (HYS and the occurrence of dementia. Dementia and mild cognitive impairment frequently occur in PD patients and should be investigated in a routine way.O objetivo desta pesquisa foi avaliar a ocorrência de déficits cognitivos em 32 indivíduos (idade média: 67,2 anos com doença de Parkinson (DP. Procedimentos: avaliação clínico-neurológica, escala de Hoehn and Yahr modificada (EHY, bateria neurospicológica do CERAD (Consortium to Establish a Registry for Alzheimer' Disease, questionário de Pfeffer e escore clínico da demência (Clinical Dementia Rating. Foi feita comparação com grupo controle (GC de 26 indivíduos sem declínio cognitivo, com idade e nível educacional similares. Os pacientes com DP tiveram desempenho inferior na bateria CERAD, quando comparados ao do GC. Foram caracterizados 3 subgrupos com PD segundo a cognição: sem déficits cognitivos - 15 casos; transtorno cognitivo leve - 10; demência - 7 casos. Houve associação entre comprometimento motor e ocorrência de demência. Demência e transtorno cognitivo leve são freqüentes em pacientes com DP e devem ser

  3. Uplift mechanism for a shallow-buried structure in liquefiable sand subjected to seismic load: centrifuge model test and DEM modeling

    Science.gov (United States)

    Zhou, Jian; Wang, Zihan; Chen, Xiaoliang; Zhang, Jiao

    2014-06-01

    Based on a centrifuge model test and distinct element method (DEM), this study provides new insights into the uplift response of a shallow-buried structure and the liquefaction mechanism for saturated sand around the structure under seismic action. In the centrifuge test, a high-speed microscopic camera was installed in the structure model, by which the movements of particles around the structure were monitored. Then, a two-dimensional digital image processing technology was used to analyze the microstructure of saturated sand during the shaking event. Herein, a numerical simulation of the centrifuge experiment was conducted using a two-phase (solid and fluid) fully coupled distinct element code. This code incorporates a particle-fluid coupling model by means of a "fixed coarse-grid" fluid scheme in PFC3D (Particle Flow Code in Three Dimensions), with the modeling parameters partially calibrated based on earlier studies. The physical and numerical models both indicate the uplifts of the shallow-buried structure and the sharp rise in excess pore pressure. The corresponding micro-scale responses and explanations are provided. Overall, the uplift response of an underground structure and the occurrence of liquefaction in saturated sand are predicted successfully by DEM modeling. However, the dynamic responses during the shaking cannot be modeled accurately due to the restricted computer power.

  4. A comprehensive study of MPI parallelism in three-dimensional discrete element method (DEM) simulation of complex-shaped granular particles

    Science.gov (United States)

    Yan, Beichuan; Regueiro, Richard A.

    2018-02-01

    A three-dimensional (3D) DEM code for simulating complex-shaped granular particles is parallelized using message-passing interface (MPI). The concepts of link-block, ghost/border layer, and migration layer are put forward for design of the parallel algorithm, and theoretical scalability function of 3-D DEM scalability and memory usage is derived. Many performance-critical implementation details are managed optimally to achieve high performance and scalability, such as: minimizing communication overhead, maintaining dynamic load balance, handling particle migrations across block borders, transmitting C++ dynamic objects of particles between MPI processes efficiently, eliminating redundant contact information between adjacent MPI processes. The code executes on multiple US Department of Defense (DoD) supercomputers and tests up to 2048 compute nodes for simulating 10 million three-axis ellipsoidal particles. Performance analyses of the code including speedup, efficiency, scalability, and granularity across five orders of magnitude of simulation scale (number of particles) are provided, and they demonstrate high speedup and excellent scalability. It is also discovered that communication time is a decreasing function of the number of compute nodes in strong scaling measurements. The code's capability of simulating a large number of complex-shaped particles on modern supercomputers will be of value in both laboratory studies on micromechanical properties of granular materials and many realistic engineering applications involving granular materials.

  5. Los demócratas tucumanos y su participación en la elección nacional de 1937

    Directory of Open Access Journals (Sweden)

    Parra, María Graciana

    2014-10-01

    Full Text Available El presente trabajo tiene por objeto indagar acerca de las estrategias desplegadas por el Partido Demócrata Nacional de Tucumán (PDNT durante la campaña presidencial de 1937. En ese sentido, se analizarán las dificultades de los demócratas para cohesionar sus filas, atravesadas por la faccionalización interna debido a la existencia de diversas oposiciones entre sus integrantes, manifiestas por un lado en el enfrentamiento entre “tradicionalistas” y “renovadores”, y por otro en la puja entre las diversas fuerzas que confluyeron en la formación del Partido y en la estructuración de la Concordancia a nivel local. A esta conflictividad interna del PDNT se sumaron las dificultosas vinculaciones con las esferas nacionales, tanto partidarias como gubernamentales, como consecuencia del armado político que caracterizó a la Concordancia. En igual proporción, el juego pragmático del presidente Justo influyó en la dinámica política de la provincia y en los resultados electorales.

  6. Correction of Interferometric and Vegetation Biases in the SRTMGL1 Spaceborne DEM with Hydrological Conditioning towards Improved Hydrodynamics Modeling in the Amazon Basin

    Directory of Open Access Journals (Sweden)

    Sebastien Pinel

    2015-12-01

    Full Text Available In the Amazon basin, the recently released SRTM Global 1 arc-second (SRTMGL1 remains the best topographic information for hydrological and hydrodynamic modeling purposes. However, its accuracy is hindered by errors, partly due to vegetation, leading to erroneous simulations. Previous efforts to remove the vegetation signal either did not account for its spatial variability or relied on a single assumed percentage of penetration of the SRTM signal. Here, we propose a systematic approach over an Amazonian floodplain to remove the vegetation signal, addressing its heterogeneity by combining estimates of vegetation height and a land cover map. We improve this approach by interpolating the first results with drainage network, field and altimetry data to obtain a hydrological conditioned DEM. The averaged interferometric and vegetation biases over the forest zone were found to be −2.0 m and 7.4 m, respectively. Comparing the original and corrected DEM, vertical validation against Ground Control Points shows a RMSE reduction of 64%. Flood extent accuracy, controlled against Landsat and JERS-1 images, stresses improvements in low and high water periods (+24% and +18%, respectively. This study also highlights that a ground truth drainage network, as a unique input during the interpolation, achieves reasonable results in terms of flood extent and hydrological characteristics.

  7. Fracture assessment of laser welde joints using numerical crack propagation simulation with a cohesive zone model; Bruchmechanische Bewertung von Laserschweissverbindungen durch numerische Rissfortschrittsimulation mit dem Kohaesivzonenmodell

    Energy Technology Data Exchange (ETDEWEB)

    Scheider, I.

    2001-07-01

    This thesis introduces a concept for fracture mechanical assessment of structures with heterogenuous material properties like weldments. It is based on the cohesive zone model for numerical crack propagation analysis. With that model the failure of examined structures due to fracture can be determined. One part of the thesis contains the extension of the capabilities of the cohesive zone model regarding modelling threedimensional problems, shear fracture and unloading. In a second part new methods are developed for determination of elastic-plastic and fracture mechanical material properties, resp., which are based on optical determination of the specimen deformation. The whole concept has been used successfully for the numerical simulation of small laser welded specimens. (orig.) [German] In der vorliegenden Arbeit wird ein Konzept vorgestellt, mit dem es moeglich ist, Bauteile mit heterogenen Materialeigenschaften, wie z.B. Schweissverbindungen, bruchmechanisch zu bewerten. Es basiert auf einem Modell zur numerischen Rissfortschrittsimulation, dem Kohaesivzonenmodell, um das Versagen des zu untersuchenden Bauteils infolge von Bruch zu bestimmen. Ein Teil der Arbeit umfasst die Weiterentwicklung des Kohaesivzonenmodells zur Vorhersage des Bauteilversagens in Bezug auf die Behandlung dreidimensionaler Probleme, Scherbuch und Entlastung. In einem zweiten Teil werden Methoden zur Bestimmung sowohl der elastischplastischen als auch der bruchmechanischen Materialparameter entwickelt, die zum grossen Teil auf optischen Auswertungsmethoden der Deformationen beruhen. Das geschlossene Konzept wird erfolgreich auf lasergeschweisste Kleinproben angewendet. (orig.)

  8. Preparation of MMC structures consisting of carbonfibre/aluminium prepregs by using the high velocity flame spraying; Herstellen von Halbzeugen aus kohlenstoffaserverstaerkten Aluminiumprepregs mit dem Hochgeschwindigkeitsflammspritzen

    Energy Technology Data Exchange (ETDEWEB)

    Wielage, B.; Rahm, J. [Lehrstuhl fuer Verbundwerkstoffe, TU Chemnitz-Zwickau, Chemnitz (Germany)

    1994-12-01

    The application of the thermal spraying process is a new way to produce carbon fibre reinforced Al-Matrix composites. Spreaded fibre rovings are enveloped in the matrix material with high velocity flame spraying. The advantage of the thermal spraying process is based in the low times for contacting between carbon fibres and liquid matrix material. Chemical reactions on the interface fibre/matrix, which are caused the decreasing of the fibre tensile strange, can be excluded. The thermal sprayed prepregs are compressed to MMC by hot pressing process. This longfibre reinforced composites are used to increase for instance casted components of motors. The aim of this research is the estimation of possibility to applicate the high velocity flame process for prepreg manufacturing. (orig.) [Deutsch] Die Anwendung des thermischen Spritzens zur Herstellung C/langfaserverstaerkter Al-Matrix Verbundwerkstoffe mittels Prepregtechnik beschreitet einen neuartigen Verfahrensweg. Zu Fasergelegen aufgespreizte Rovings werden durch Flamm- oder Hochgeschwindigkeitsflammspritzen mit dem Matrixmetall eingehuellt. Der Vorteil des thermischen Spritzens liegt in den geringen Kontaktzeiten der C-Fasern mit dem schmelzfluessigen Matrixmetall. Chemische Reaktionen zwischen Fasern und der Matrix, die zur Karbidbildung und Reduzierung der Verbundfestigkeit fuehren, koennen auch beim Verwenden von C-Fasern ohne Barriereschicht weitgehend ausgeschlossen werden. Die so hergestellten Prepregs koennen z.B. durch Heisspressen zu MMC kompaktiert werden, und als Halbzeuge (Inserts) Gussbauteile in hochbelasteten Bereichen partiell verstaerken. Die im Rahmen der Veroeffentlichung dargestellten Untersuchungen haben die kritische Beurteilung der Ergebnisse des HVOF-Spritzverfahrens zur Herstellung von C/Faser/Aluminiumprepregs zum Ziel. (orig.)

  9. La oposición en el autoritarismo. El caso del Partido Demócrata Cristiano durante el régimen del general Pinochet en Chile

    Directory of Open Access Journals (Sweden)

    Carlos Huneeus

    2016-01-01

    Full Text Available ¿De qué recursos dispone la oposición en un régimen militar? ¿Cuáles son las arenas institucionales en las cuales pueden actuar sus dirigentes? Estas son las preguntas que orientan este artículo a través del examen del caso chileno. El artículo analiza la oposición llevada a cabo por el Partido Demócrata Cristiano ( pdc a la dictadura militar comandada por Augusto Pinochet y los recursos políticos que dispuso para ello. La argumentación es que los recursos que tiene la oposición provienen especialmente de la tradición democrática, destacando los partidos y ciertas instituciones como la Iglesia católica, cuando tiene una jerarquía que mantiene distancia con la dictadura. La importancia de estos recursos depende de la magnitud de la ruptura con las instituciones democráticas provocada por la instauración autoritaria. Entre los recursos de los que dispuso el pdc destaca el apoyo que recibió de la Christlich Demokratische Union (Unión Demócrata Cristiana/ cdu de Alemania. El análisis se centra entre los años 1973 y 1982, cuando la colectividad alemana estaba en la oposición, y considera las expresiones de ese apoyo en Chile y en Alemania.

  10. "Das unausgesprochene Gefühl der Unzugehörigkeit" : Amerika als Zufluchtsmöglichkeit vor dem Selbst in Max Frischs Romanen Stiller und Homo faber

    Directory of Open Access Journals (Sweden)

    Vesna Kondrič Horvat

    1993-12-01

    Full Text Available In seiner Rede Emigranten, die er 1958 anläßlich der Georg-BtichnerPreis- Verleihung hielt und woraus das Titelzitat des vorliegenden Beitrags stammt, äußerte Max Frisch die Meinung, jeder frei gewahlte Wohnsitz solle dem Schriftsteller das unausgesprochene Gefühl der Unzugehörigkeit gestatten. Mit dem Satz: "Ich bin nicht Stiller!" (St 9 beginnt Frisch seinen 1954 veröffentlichten Roman Stiller. Ein Mann - ein Bildhauer -, der viele Versuche unternommen hat, seiner 'eigentlichen ', seelisch-existentiellen Identität zu entgehen, flieht schlieBlich, als alle anderen Versuche (sich im Spanischen Bürgerkrieg als ein mutiger Mann, sich in der Ehe als ein idealer Mann, sich in der Kunst als erfolgreicher Bildhauer zu bewahren scheitern, nach Amerika und läßt seine lungenkranke Frau Julika im Sanatorium in Davos zurück. Nach mehr als sechsjahrigem Fernbleiben kehrt er unter anderem Namen in die Heimat zurück und wird an der Schweizer Grenze - wegen vermeintlicher Verwicklung in eine Spionage-Affäre - verhaftet. An diesem Punkt beginnt der Roman.

  11. Melanie Ulz: Auf dem Schlachtfeld des Empire. Männlichkeitskonzepte in der Bildproduktion zu Napoleons Ägyptenfeldzug. Marburg: Jonas Verlag 2008.

    Directory of Open Access Journals (Sweden)

    Wolfgang Schmale

    2010-11-01

    Full Text Available Der Ägyptenfeldzug Napoleons am Ende des 18. Jahrhunderts wurde im Nachhinein bildpublizistisch extensiv aufgearbeitet. Diese Publizistik wird von Melanie Ulz unter dem Gesichtspunkt dargestellter und sich wandelnder Männlichkeitskonzepte untersucht. Zentral entfaltet sich in den Visualisierungen der später so genannte „Orientalismus“. Dem europäischen/französischen Mann und Krieger wird der orientalische Mann als multivalentes und kulturell unterlegenes Wesen gegenübergestellt. Bei aller Subtilität der Kunst handelt es sich im Kern um die Gegenüberstellung von Stereotypen. Ulz kann in ihrer Studie überzeugend den sexuierten Subtext des Orientalismus nachweisen.Napoleon’s Campaign of Egypt at the end of the 18th century had afterwards been worked with and addressed in graphical media extensively. Melanie Ulz analyzes these media in respect to expressed as well as changing concepts of masculinity. The visualizations essentially display what has later been called “Orientalism”. The European/ French man and warrior is opposed to the Oriental man, who is depicted as multivalent and culturally inferior. Despite the subtlety of the art, the works basically deal with the opposition of stereotypes. Ulz manages to convincingly prove the sexualized subtext of Orientalism.

  12. Measuring the quality of life of people with dementia in nursing homes in Germany - the study protocol for the Qol-Dem Project.

    Science.gov (United States)

    Dichter, Martin Nikolaus; Halek, Margareta; Dortmann, Olga; Meyer, Gabriele; Bartholomeyczik, Sabine

    2013-01-01

    QUALIDEM is a standardized dementia-specific quality of life (Qol) measurement, which was developed and validated in the Netherlands. A German version has been available since 2008. This study protocol describes the design and methodology for the quality of life of people with dementia (Qol-Dem) project. This project aims to evaluate the reliability and validity of the German version of the QUALIDEM. Due to the lack of both a universal definition of Qol and of standards to verify the validity of Qol measurements, this study is divided into three phases. The aim of the first theoretical phase is the development of a dementia-specific Qol model as a result of a meta-synthesis of qualitative studies. The second empirical phase consists of the three following steps: (a) an investigation of the scalability and internal consistency of the measure, (b) an evaluation of the interrater and intrarater reliability, and (c) an extensive evaluation of the validity of the QUALIDEM. The resulting Qol model (phase 1) will be used for the selection of appropriate comparators for validity testing. In the third phase, the QUALIDEM will be adapted, if necessary, based on the knowledge generated in the first two phases. The findings of the Qol-Dem project should deliver an accurate assessment of the psychometric properties of the German version of the QUALIDEM. The results will contribute to the further development of the instrument. Furthermore, the results will contribute to the theoretical development of the concept of Qol among people with dementia.

  13. Flow characteristics analysis of purge gas in unitary pebble beds by CFD simulation coupled with DEM geometry model for fusion blanket

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Youhua [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Chen, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Luo, Guangnan [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2017-01-15

    Highlights: • A unitary pebble bed was built to analyze the flow characteristics of purge gas based on DEM-CFD method. • Flow characteristics between particles were clearly displayed. • Porosity distribution, velocity field distribution, pressure field distribution, pressure drop and the wall effects on velocity distribution were studied. - Abstract: Helium is used as the purge gas to sweep tritium out when it flows through the lithium ceramic and beryllium pebble beds in solid breeder blanket for fusion reactor. The flow characteristics of the purge gas will dominate the tritium sweep capability and tritium recovery system design. In this paper, a computational model for the unitary pebble bed was conducted using DEM-CFD method to study the purge gas flow characteristics in the bed, which include porosity distribution between pebbles, velocity field distribution, pressure field distribution, pressure drop as well as the wall effects on velocity distribution. Pebble bed porosity and velocity distribution with great fluctuations were found in the near-wall region and detailed flow characteristics between pebbles were displayed clearly. The results show that the numerical simulation model has an error with about 11% for estimating pressure drop when compared with the Ergun equation.

  14. A vulnerabilidade dos cuidadores de idosos com demência: revisão integrativa Vulnerability of caregivers for the elderly with dementia: integrative review

    Directory of Open Access Journals (Sweden)

    Bruna Silva Leite

    2017-07-01

    Full Text Available Objetivo: analisar a vulnerabilidade dos cuidadores de idosos com demência. Método: Trata-se de uma revisão integrativa de natureza quanti-qualitativa. O período de coleta de dados ocorreu de 01/09/14 à 30/10/14. Resultados: Do total de artigos analisados 26% apontam intervenções para alívio da sobrecarga; 20% analisam a carga de depressão; 16% dos estudos abordam a sobrecarga do cuidador; 14 % pautaram suas discussões no bem estar físico e espiritual, bem estar psicológico e social e nos prejuízos a qualidade de vida; 12% abordaram o estresse. Conclusão: Pesquisadores de diversos países apontam os impactos do cuidado na vida do cuidador, destacando: a sobrecarga emocional, estresse rotineiro e sintomas depressivos. Entretanto, existem medidas atenuantes, identificadas através das pesquisas, que podem contribuir para alívio do estresse cotidiano, como por exemplo: a prática diária de meditação yoga, a religiosidade, o relacionamento positivo entre a família, o idoso e o cuidador. Descritores: Demência, Cuidadores, Enfermagem familiar.

  15. Leucipo, Demócrito e Kant: uma Reflexão sobre a Equivalência entre Ser e Não-Ser

    Directory of Open Access Journals (Sweden)

    Eberth Eleuterio dos Santos

    2015-08-01

    Full Text Available De início, apresentaremos a tese de Demócrito e Leucipo, segundo a qual o ser não é mais que o não-ser, tendo como contraponto o pensamento eleata acerca da inexistência necessária do não-ser. Esta discussão nos remete à oposição entre o pleno (cheio e o vazio que será posteriormente traduzida na oposição entre o ser e o nada (ou o não-ser. Desse modo, a oposição entre o pleno e o vazio é uma oposição que se desloca para o ser e o não-ser. Em seguida, faremos a apreciação do escrito pré-crítico kantiano Ensaio para introduzir em filosofia o conceito de grandeza negativa, no qual distinguimos certo tipo de oposição tomada entre grandezas em geral que, acreditamos, poderia ser interpretado como estando de acordo com o posicionamento de Demócrito e Leucipo sobre o estatuto ontológico do não-ser como princípio equivalente ao ser, e não como sua contradição em sentido puramente lógico.

  16. Aplicação da versão brasileira da escala de avaliação clínica da demência (Clinical Dementia Rating - CDR em amostras de pacientes com demência Application of the Brazilian version of the CDR scale in samples of dementia patients

    Directory of Open Access Journals (Sweden)

    Alberto Luiz Grigoli Maia

    2006-06-01

    Full Text Available OBJETIVO: Avaliar a concordância da escala CDR com critérios diagnósticos e mini exame do estado mental (MEEM, e correlação com escala de Blessed, numa amostra de pacientes do sul do Brasil. MÉTODO: A escala foi avaliada em 269 pacientes com doença de Alzheimer (DA, demência vascular e demência questionável num desenho transversal. Os critérios do NINCDS-ADRDA para provável DA e NINDS-AIREN para provável demência vascular foram os padrões-ouro. O MEEM, a escala Blessed para gravidade da demência, o escore isquêmico de Hachinski, e uma bateria de testes cognitivos também foram aplicados. RESULTADOS: A concordância com o padrão-ouro foi boa (kappa=0,73, e com o MEEM em categorias foi moderada (kappa= 0,53. Observou-se correlação significativa da escala CDR com Blessed (r=0,96; p=0,001. Não se observou diferença de escolaridade ou de idade entre as categorias da escala CDR. CONCLUSÃO: A concordância da CDR foi boa para os critérios diagnósticos e moderada para o MEEM. A escala mostrou validade de construto para gravidade de demência. Não se observou impacto da escolaridade sobre este instrumento.OBJECTIVE: The objective of the study was the analysis of agreement between the CDR scale with diagnostic criteria and mini mental state examination (MMSE, as well as correlation with Blessed scale, in a sample of Southern Brazilian patients. METHOD: The CDR scale was cross-sectionaly evaluated in 269 dementia patients Alzheimer’s disease (AD vascular dementia, and questionable. The NINCDS-ADRDA criteria for probable AD and the NINDS-AIREN for probable vascular dementia were the gold standard. The MMSE, the Blessed scale, the Hachinski ischemic score, and a battery of cognitive tests were also applied. RESULTS: The agreement to gold standard was good (kappa=0.73, while to MMSE categorized was moderate (kappa=0.53. A significant correlation with the Blessed scale (r=0.96; p=0.001 was observed. Education and age were similar

  17. EL CRITERIO DE INTERPRETACIÓN DEL PRINCIPIO NON BIS IN ÍDEM PREVISTO EN EL ARTÍCULO 45.3 DE LA CONSTITUCIÓN ESPAÑOLA

    OpenAIRE

    María Lourdes,Ramírez Torrado

    2010-01-01

    Respecto a la lectura constitucional del principio se propone una interpretación complementaria y diversa a la hasta ahora presentada por la doctrina constitucional y científica que insisten en derivar el sustento constitucional del postulado non bis in ídem del artículo 25. Desconociendo lo anterior, una disposición constitucional que prevé tácitamente el non bis in ídem al establecer un criterio para determinar cuál es la sanción o el procedimiento a imponer sin quebrantar la prohibición bi...

  18. Tratando os sintomas comportamentais e psicológicos da demência (SCPD Treating the behavioral and psychological symptoms of dementia (BPSD

    Directory of Open Access Journals (Sweden)

    Paulo Caramelli

    2007-01-01

    Full Text Available Os transtornos neuropsiquiátricos na demência, também denominados de sintomas comportamentais e psicológicos da demência (SCPD, têm prevalência elevada no curso clínico da doença de Alzheimer e de outras desordens relacionadas. A relevância dessas manifestações é bem reconhecida, estando relacionada a evolução clínica mais desfavorável, maior sobrecarga do cuidador e maior incidência de institucionalização, entre outros fatores. O objetivo desta conferência clínica é procurar responder a algumas questões relacionadas a este tema, com o intuito de oferecer aos leitores uma breve atualização sobre o assunto. Os seguintes tópicos foram selecionados para discussão: se a nomenclatura SCPD é adequada para denominar essas manifestações clínicas; se há uma forma de classificar e como diagnosticar esses sintomas; qual a sua prevalência, seu impacto no curso clínico das demências e quais os fatores de risco associados ao seu aparecimento; quais as bases fisiopatológicas conhecidas; e, finalmente, como abordar esses pacientes e também suas famílias e cuidadores, do ponto de vista terapêutico, tanto em relação a intervenções farmacológicas quanto não farmacológicas.Neuropsychiatric disturbances in dementia, also named behavioral and psychological symptoms of dementia (BPSD, are highly prevalent in the clinical course of Alzheimer disease and related disorders. The clinical relevance of these manifestations is well recognized, being related to a poor clinical outcome, greater caregiver burden and to higher institutionalization rates, among others. This clinical conference attempts to respond to some questions related to this subject, in order to offer a brief update to the readers. The following topics are discussed: if the nomenclature BPSD is adequate for these clinical manifestations; how to classify and to diagnose these symptoms; how prevalent they are; which is their impact on the clinical course of the

  19. Demência como fator de risco para fraturas graves em idosos Dementia as risk factor for severe bone fractures among the elderly

    Directory of Open Access Journals (Sweden)

    Aline de Mesquita Carvalho

    2002-08-01

    Full Text Available INTRODUÇÃO: As quedas entre pessoas idosas constituem importante problema de saúde pública devido à sua alta incidência, às complicações para a saúde e aos altos custos assistenciais. O estudo realizado visa a estimar a associação entre demência e ocorrência de quedas e fraturas entre idosos. MÉTODOS: Foi conduzido estudo caso-controle de 404 indivíduos com 60 ou mais anos de idade, da cidade do Rio de Janeiro, Brasil. Casos e controles foram pareados por idade, sexo e hospital. Os dados foram coletados por meio de entrevista estruturada com os idosos. Foram considerados portadores de quadro demencial idosos cuja pontuação no questionário BOAS fosse superior a dois. Foram obtidos odds ratios (OR ajustados por fatores potenciais de confusão, utilizando-se regressão logística condicional. RESULTADOS: As quedas distribuíram-se igualmente entre os períodos da manhã, tarde e noite, havendo uma redução em sua freqüência durante a madrugada. Acidentaram-se dentro de casa 78% dos idosos com demência, contra 55% daqueles sem essa doença. O OR não-ajustado para a associação entre demência e fratura grave foi de 2,0 (IC95%, 1,23-3,25. Após o ajuste por fatores de confusão, houve uma pequena redução dessa associação (OR=1,82, 1,03-3,23. CONCLUSÃO: Idosos com quadro demencial apresentam maior risco de caírem e ser hospitalizados por fratura do que idosos sem demência. Tal fato implica a necessidade de cuidados especiais com esses indivíduos, visando a minimizar o risco desses acidentes.INTRODUCTION: Falls among elderly represent an important public health concern due to its high incidence, health implications, and medical care costs. The study aims to assess the association between dementia and bone fracture risk after falls among the elderly. METHODS: A case-control of 404 subjects aged 60 years old or more living in Rio de Janeiro, Brazil, was carried out. Cases and controls were matched by age, sex, and

  20. Power generation from animal meal in the circulating fluidized bed combustor at Lippewerk, Luenen; Energetische Nutzung von Tiermehl in der Zirkulierenden Wirbelschichtanlage (ZWS) auf dem Lippewerk, Luenen

    Energy Technology Data Exchange (ETDEWEB)

    Fendel, A. [Rethmann Lippewerk GmbH, Luenen (Germany)

    2001-07-01

    Experiments have shown that the Luenen plant can be operated with animal meal as mono-fuel. In fact, combustion characteristics will be better and emissions lower. The ash has an excellent burnout. It contains no proteins, so it appears reasonable to assume that any prions will be destroyed during combustion. [German] Auf Basis der bestehenden Betriebserfahrungen ist die ZWS in Luenen technisch nachweislich in der Lage, 100% der Feuerungswaermeleistung ueber Tiermehl abzudecken. Damit ist ein Betrieb als Monobrennstoffanlage durchfuehrbar. Besonders erfreulich ist zu werten, dass sich bei dem Einsatz von Tiermehl das Verbrennungsverhalten der Anlage positiver darstellt und eine Verbesserung der Emissionssituation auftritt. Die entstehende Asche weist einen ungewoehnlich guten Ausbrand auf. In ihr sind Proteine nicht mehr nachweisbar und daraus kann rueckgeschlossen werden, dass in der ZWS auch potentiell Prionen vernichtet werden. (orig.)

  1. Annual report 1999 of the air pollution monitoring network of the German Federal Environmental Agency; Jahresbericht 1999 aus dem Messnetz des Umweltbundesamtes

    Energy Technology Data Exchange (ETDEWEB)

    Beilke, S.; Uhse, K. [comps.

    2000-12-01

    In this annual report the results of the air pollution monitoring network of the German Federal Environmental Agency (FEA) are presented for the year 1999. The network consists of 23 stations (9 stations with personnel and 14 automatically working container stations) which are situated in rural areas. As the data set was thoroughly quality controlled reliable statements on trends can be made. (orig.) [German] Im vorliegenden Jahresbericht werden die Ergebnisse aus dem Messnetz des Umweltbundesamtes fuer das Jahr 1999 vorgestellt, interpretiert und mit den Messungen aus frueheren Jahren verglichen. Das UBA-Messnetz besteht heute aus insgesamt 23 in laendlichen Regionen gelegenen Stationen, wovon 9 Messstellen personell besetzt und 14 automatisch arbeitende Containerstationen sind. Die Datensaetze sind in sich homogen, d.h. es wurden im Verlauf der Jahre keine gravierenden Veraenderungen an den Messbedingungen vorgenommen, weder bei der Probenahme noch bei der Analytik. Die Daten wurden einer eingehenden Qualitaetspruefung unterzogen, sowohl intern als auch bei internationalen Ringvergleichen der Analysenverfahren. (orig.)

  2. Etapy postępowania przymusowego w administracji względem obowiązków niepieniężnych w prawie Polski i Niemiec

    OpenAIRE

    Ostojski, Przemysław

    2013-01-01

    Wydział Prawa i Administracji Treść pracy dotyczy nie poruszanego jak dotąd szerzej w polskiej doktrynie prawa i orzecznictwie sądowoadministracyjnym tematu etapów postępowania egzekucyjnego w administracji w Polsce i w Niemczech. W założeniu opracowanie ma być próbą wykazania, iż polskie postępowanie egzekucyjne, podobnie jak niemieckie, składa się z trzech etapów. Wszystkie te etapy w prawie polskim odpowiadają zasadniczo budowie postępowania egzekucyjnego względem obowiązków pieniężnych...

  3. Ranking of CT in persistent vertigo after implantation of stapes prostheses; Stellenwert der Computertomographie bei persistierenden Gleichgewichtsstoerungen nach dem Einsatz von Stapesplastiken

    Energy Technology Data Exchange (ETDEWEB)

    Koesling, S. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Woldag, K. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Meister, E.F. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Reschke, I. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Schulz, H.G. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie

    1995-01-01

    10 of 150 patients had persistent vertigo after implanation of stapes prostheses. These patients were evaluated by high resolution CT in the axial and coronal plane. Scans showed in all cases findings which related to the symptoms. The CT findings were proved intraoperatively in 9 cases. A new indirect sign of a perilymphatic fistula is described in form of an air bulla at the end of the prosthesis. Retympanotomy could be planned better with the help of HR-CT. (orig.) [Deutsch] Von 150 Patienten zeigten 10 nach dem Einsatz einer Stapesprothese eine persistierende vestibulaere Symptomatik. Mittels der hochaufloesenden Felsenbein-CT in axialer und koronarer Schnittfuehrung konnten in allen Faellen in Symptomatik erklaerende Befunde erhoben werden. Eine operative Bestaetigung erfolgte in 9 Faellen. Als bisher in der Literatur in diesem Zusammenhang nicht beschriebenes, indirektes Zeichen einer Perilymphfistel wurde eine kleine Luftblase am Prothesenende nachgewiesen. Die HR-CT hat sich als wesentliche Erleichterung bei der Planung einer Retympanotomie erwiesen. (orig.)

  4. Assessing the representativeness of durability tests for wood pellets by DEM Simulation - Comparing conditions in a durability test with transfer chutes

    Science.gov (United States)

    Mahajan, Aditya; Dafnomilis, Ioannis; Hancock, Victoria; Lodewijks, Gabriel; Schott, Dingena

    2017-06-01

    Dust generation when handling wood pellets is related to the durability of the product, in other words the wear rate of particles subject to forces. During transport, storage and handling wood pellets undergo different forces when interacting with different pieces of equipment. This paper assesses the representativeness of the tumbling can test in relation to transfer chutes, by comparing forces acting on wood pellets in durability tests and in transfer chutes using DEM. The study also incorporates effects such as shape and size variations. The results showed that the tumbling can test underestimates compressive and tangential forces. Since the tested material is subject to milder conditions than in reality, it can be concluded that this test is not representative for the conditions in the supply chain of wood pellets.

  5. Zoophilie in Zoologie und Roman: Sex und Liebe zwischen Mensch und Tier bei Plutarch, Plinius dem Älteren, Aelian und Apuleius

    Directory of Open Access Journals (Sweden)

    Judith Hindermann

    2011-09-01

    Full Text Available Die Bedeutung von Zoophilie in der antiken Literatur wurde bislang – mit Ausnahme des Mythos – kaum untersucht. Überblickt man die überlieferten literarischen Texte, fällt auf, dass Zoophilie ausserhalb des Mythos vor allem in zwei literarischen Gattungen auftritt : Einerseits in den zoologischen Schriften von Plutarch, Plinius dem Älteren und Aelian, andererseits im antiken Roman, d.h. in den Metamorphosen des Apuleius und im pseudo-lukianischen Onos. In diesem Beitrag soll untersucht werden, welche Funktion Zoophilie in den beiden literarischen Gattungen hat und wie die Autoren die sexuelle Praktik bewerten, die weder nach griechischem noch römischen Recht strafbar war. Da Vorstellungen über Tiere eng mit Gender und Geschlechterhierarchien verbunden sind, soll insbesondere die Frage berücksichtigt werden, inwiefern männliche und weibliche Verhaltens- und Rollenzuschreibungen bei der Darstellung zoophiler Akte wirksam werden.

  6. Critical Mass als performative Kritik der städtischen Verkehrspolitik? Fahrradfahren mit Judith Butler auf dem Gepäckträger

    Directory of Open Access Journals (Sweden)

    Anke Strüver

    2015-11-01

    Full Text Available Obwohl die meisten deutschen Großstädte über eine sehr schlechte Radverkehrsinfrastruktur verfügen, gewinnent innerstädtisches Radfahren und ein Engagement für das Rad als gleichberechtigtes Verkehrsmittel stark an Bedeutung. Als Indiz für dieses Engagement gelten in Hamburg die monatlichen Critical Mass Radfahrten unter dem Motto „We aren’t blocking traffic… we are traffic!“. Der Beitrag fragt vor diesem Hintergrund, inwiefern die Critical Mass als Aktionsform in Hamburg den Diskurs der autogerechten Stadt, die Straßenverkehrspolitik und die dominante räumliche Ordnung in Frage stellen kann und ob die Critical Mass als performative Kritik der normativen Ordnung im Sinne Judith Butlers verstanden werden kann.

  7. Aussteigen aus dem Rechtsextremismus: Foto-Praxis, bildwissenschaftliche Analyse und Ausstellungsarbeit als Methoden individueller Reflexion und des wissenschaftlichen und (sozialpädagogischen Kompetenzerwerbs

    Directory of Open Access Journals (Sweden)

    Ulrike Pilarczyk

    2013-06-01

    Full Text Available Der Beitrag zeigt die medienpädagogischen und bildwissenschaftlichen Dimensionen eines zeitlich und thematisch gestaffelten Projektes auf. Ausgangspunkt war das in den Jahren 2009/10 von der Organisation EXIT-Deutschland in Berlin mit Aussteigern/-innen aus der rechtsextremen Szene initiierte Fotoprojekt «Lebensbilder». Die im Rahmen biografisch orientierter, medien- und sozialpädagogischer Fallarbeit entstandenen Fotos wurden als Prozess individueller Bilderzeugung und als Mittel zur Reflexion der jeweiligen Lebenssituation der Aussteiger(innen verstanden und eingesetzt. Eine Ausstellung schloss diese erste Phase des hier beschriebenen Projektes ab. Dem Wunsch folgend, die praktischen Erfahrungen aus der Arbeit mit Fotos wissenschaftlich überprüfen zu lassen, wurden in den Jahren 2011 und 2012 mit Studierenden am erziehungswissenschaftlichen Institut der TU Braunschweig die «Lebensbilder» zunächst einer wissenschaftlichen Bildanalyse unterzogen und anschliessend in einem gestalterisch-interpretativen Projekt durch die Studierenden zu einer Ausstellung weiterentwickelt.

  8. Auf dem Weg zu einer ‹vernetzenden› Profession. Theoretisch-konzeptionelle Überlegungen zum Selbstverständnis der Medienpädagogik

    Directory of Open Access Journals (Sweden)

    Kai-Uwe Hugger

    2017-06-01

    Full Text Available In die Professionalisierungsdebatte der erziehungswissenschaftlichen Disziplin gehört auch die Auseinandersetzung mit dem Selbstverständnis der Medienpädagogik bzw. des Medienpädagogen. Die Medienpädagogische Professionalisierungsdiskussion stellt daher für den Autor gleichzeitig die Basis für einen Klärungsversuch einer medienpädagogischen Identität dar. Er beschreibt und analysiert Professionalisierungsstrategien aufgrund von vier Konzepten medienpädagogischer Professionalität: der beschützend-wertevermittelnde, der gesellschaftskritisch-wissenschaftszentrierte, der bildungstechnologisch-opitimierende und der vernetzte Medienpädagoge. Über den Begriff der Medienkompetenz nach Baacke stellt er zentrale Eckpunkte einer Struktur medienpädagogischen Handelns auf. (DIPF/Orig..

  9. Application of DEM in Optimization Design of Wind Turbine Points%DEM在风电场风机点位优化设计中的应用

    Institute of Scientific and Technical Information of China (English)

    韩小平; 毛克; 冯长青; 李鹏

    2015-01-01

    Based on the DEM, by ArcGIS10.0 software, using spatial analysis tools to extract the slope map of wind turbine points in the surveyed area, then graded on the slope map for statistical analysis. To design optimal wind turbine point position, thereby enhancing the quality and efficiency of the project.%本文基于DEM,通过ArcGIS10.0软件,采用空间分析工具提取出风电场测区内风机点位的坡度图,通过对坡度图进行分级统计分析,设计出风电场中风机点位的最优位置,从而提高工程项目的质量和效率。

  10. Knickzone Extraction Tool (KET – A new ArcGIS toolset for automatic extraction of knickzones from a DEM based on multi-scale stream gradients

    Directory of Open Access Journals (Sweden)

    Zahra Tuba

    2017-04-01

    Full Text Available Extraction of knickpoints or knickzones from a Digital Elevation Model (DEM has gained immense significance owing to the increasing implications of knickzones on landform development. However, existing methods for knickzone extraction tend to be subjective or require time-intensive data processing. This paper describes the proposed Knickzone Extraction Tool (KET, a new raster-based Python script deployed in the form of an ArcGIS toolset that automates the process of knickzone extraction and is both fast and more user-friendly. The KET is based on multi-scale analysis of slope gradients along a river course, where any locally steep segment (knickzone can be extracted as an anomalously high local gradient. We also conducted a comparative analysis of the KET and other contemporary knickzone identification techniques. The relationship between knickzone distribution and its morphometric characteristics are also examined through a case study of a mountainous watershed in Japan.

  11. El Partido Republicano Liberal Demócrata, 1931-1936 : aspectos ideológicos y programáticos

    Directory of Open Access Journals (Sweden)

    Luis Íñigo Fernández

    1995-01-01

    Full Text Available Como alguna vez recuerdan sus propios militantes, el Partido Republicano Liberal Demócrata no es sino el Partido Reformista de los tiempos de la monarquía alfonsina, que ha cambiado de nombre para adecuarse al contexto político de la Segunda República. Este cambio de denominación tuvo lugar en un acto celebrado en el Hotel Palace de Madrid el 24 de mayo de 1931. En él, Melquíades Alvarez, líder del partido desde su fundación en 1912, tenía la intención de definir la posición que éste venía a ocupar dentro del nuevo régimen. No pudo alcanzar su objetivo porque un desvanecimiento se lo impidió —contaba por entonces el veterano líder asturiano sesenta y siete años— pero sin duda lo hizo en los múltiples discursos que en los años siguientes tendría la ocasión de pronunciar y que constituyen la principal fuente de información acerca de la ideología del partido. En este trabajo intentaremos, precisamente, a partir de esas y otras fuentes, desentrañar los rasgos principales de esa ideología, así como analizar su plasmación en forma de propuestas de soluciones concretas a las cuestiones principales que por entonces tenía planteadas el país, es decir, lo que habitualmente se denomina programa de un partido político. Por último, y basándonos en ambos aspectos, ideología y programa, trataremos de ubicar al Partido Republicano Liberal Demócrata dentro del espectro político de la Segunda República española.

  12. Evaluating the potential for site-specific modification of LiDAR DEM derivatives to improve environmental planning-scale wetland identification using Random Forest classification

    Science.gov (United States)

    O'Neil, Gina L.; Goodall, Jonathan L.; Watson, Layne T.

    2018-04-01

    Wetlands are important ecosystems that provide many ecological benefits, and their quality and presence are protected by federal regulations. These regulations require wetland delineations, which can be costly and time-consuming to perform. Computer models can assist in this process, but lack the accuracy necessary for environmental planning-scale wetland identification. In this study, the potential for improvement of wetland identification models through modification of digital elevation model (DEM) derivatives, derived from high-resolution and increasingly available light detection and ranging (LiDAR) data, at a scale necessary for small-scale wetland delineations is evaluated. A novel approach of flow convergence modelling is presented where Topographic Wetness Index (TWI), curvature, and Cartographic Depth-to-Water index (DTW), are modified to better distinguish wetland from upland areas, combined with ancillary soil data, and used in a Random Forest classification. This approach is applied to four study sites in Virginia, implemented as an ArcGIS model. The model resulted in significant improvement in average wetland accuracy compared to the commonly used National Wetland Inventory (84.9% vs. 32.1%), at the expense of a moderately lower average non-wetland accuracy (85.6% vs. 98.0%) and average overall accuracy (85.6% vs. 92.0%). From this, we concluded that modifying TWI, curvature, and DTW provides more robust wetland and non-wetland signatures to the models by improving accuracy rates compared to classifications using the original indices. The resulting ArcGIS model is a general tool able to modify these local LiDAR DEM derivatives based on site characteristics to identify wetlands at a high resolution.

  13. Analysis of aromatic catabolic pathways in Pseudomonas putida KT 2440 using a combined proteomic approach: 2-DE/MS and cleavable isotope-coded affinity tag analysis.

    Science.gov (United States)

    Kim, Young Hwan; Cho, Kun; Yun, Sung-Ho; Kim, Jin Young; Kwon, Kyung-Hoon; Yoo, Jong Shin; Kim, Seung Il

    2006-02-01

    Proteomic analysis of Pseudomonas putida KT2440 cultured in monocyclic aromatic compounds was performed using 2-DE/MS and cleavable isotope-coded affinity tag (ICAT) to determine whether proteins involved in aromatic compound degradation pathways were altered as predicted by genomic analysis (Jiménez et al., Environ Microbiol. 2002, 4, 824-841). Eighty unique proteins were identified by 2-DE/MS or MS/MS analysis from P. putida KT2440 cultured in the presence of six different organic compounds. Benzoate dioxygenase (BenA, BenD) and catechol 1,2-dioxygenase (CatA) were induced by benzoate. Protocatechuate 3,4-dixoygenase (PcaGH) was induced by p-hydroxybenzoate and vanilline. beta-Ketoadipyl CoA thiolase (PcaF) and 3-oxoadipate enol-lactone hydrolase (PcaD) were induced by benzoate, p-hydroxybenzoate and vanilline, suggesting that benzoate, p-hydroxybenzoate and vanilline were degraded by different dioxygenases and then converged in the same beta-ketoadipate degradation pathway. An additional 110 proteins, including 19 proteins from 2-DE analysis, were identified by cleavable ICAT analysis for benzoate-induced proteomes, which complemented the 2-DE results. Phenylethylamine exposure induced beta-ketoacyl CoA thiolase (PhaD) and ring-opening enzyme (PhaL), both enzymes of the phenylacetate (pha) biodegradation pathway. Phenylalanine induced 4-hydroxyphenyl-pyruvate dioxygenase (Hpd) and homogentisate 1,2-dioxygenase (HmgA), key enzymes in the homogentisate degradation pathway. Alkyl hydroperoxide reductase (AphC) was induced under all aromatic compounds conditions. These results suggest that proteome analysis complements and supports predictive information obtained by genomic sequence analysis.

  14. Topographic precursors and geological structures of deep-seated catastrophic landslides caused by typhoon Talas, determined from the analysis of high-resolution DEMs

    Science.gov (United States)

    Chigira, Masahiro; Tsou, Ching-Ying; Matsushi, Yuki

    2013-04-01

    Typhoon Talas crossed the Japanese Islands between 2 and 5 September 2011, causing more than 70 deep-seated catastrophic landslides in a Jurassic to Paleogene-Early Miocene accretion complex. Detailed examination of the topographic features of 10 large landslides before the event, recorded on DEMs with a resolution of 1 m (based on airborne laser scanner surveys), showed that all of the landslides had small scarplets near their future crowns prior to the slide, and one landslide had linear depressions along its future crown as precursor topographic features. These scarplets and linear depressions were caused by gravitational slope deformation that preceded the catastrophic failure. Strains, defined by the ratio of the length of a scarplet to the length of the whole slope (as measured along the slope line), ranged from 5% to 21%, and are the first reliable numerical data relating to the topographic precursor features of large and catastrophic landslides. Careful examination of aerial photographs from another four large landslides, for which no high-resolution DEMs were available, suggested that they also developed scarplets at their heads beforehand, which are not precisely quantified. Twelve of the 14 landslides we surveyed in the field had sliding surfaces with wedge-shaped discontinuities that consisted of faults, shear surfaces that formed during accretion, and bedding, suggesting that the buildup of pore pressure occurs readily in a gravitationally deformed rock body containing wedge-shaped discontinuities. Other types of gravitational deformation were also active; e.g., flexural toppling and buckling were each observed to have preceded one landslide.

  15. Massenmedien und Versöhnung: Die Berichterstattung über den deutsch-französischen Friedensprozeß nach dem 2. Weltkrieg

    Directory of Open Access Journals (Sweden)

    Susanne Jaeger

    2003-10-01

    Full Text Available Der vorliegende Beitrag beinhaltet die ersten Ergebnisse einer Langzeitstudie, bei der flächendeckend die deutsche Nachkriegsberichterstattung über Frankreich von 1946 bis 1970 inhaltsanalytisch ausgewertet wurde. Die Studie stützt sich dabei auf das Modell der Nachrichtenfaktoren von Johan Galtung, welche nach seiner Ansicht die Auswahl der Themen bestimmen, die zu einer Nachricht werden. Genau in diesen Selektionsroutinen liegt jedoch die implizite Gefahr, Konflikte zu vertiefen statt sie einzudämmen bzw. durch ein breites Verständnis der Hintergründe gewaltfrei bearbeitbar zu machen. Für die Zeit nach einem Krieg könnten sie Hindernisse auf dem Weg zur Annäherung und Aussöhnung ehemaliger Gegner darstellen. Wie jedoch sieht die Berichterstattung nach dem Krieg tatsächlich aus? Zeigen Massenmedien Bereitschaft zu einer veränderten Berichterstattung? Der Fall der französisch-deutschen Aussöhnung, welcher als Beispiel für einen gelungenen Aussöhnungsprozess gelten kann, belegt, dass Friedensprozesse von den Medien durchaus adäquat begleitet werden können: Z.B. ist der Anteil "positiver" Themen bzw. Berichterstattung konsistent höher als der "negativer", und der Anteil von Non-Elite-Themen steigt an und kündet von Interesse an französischer Lebensart und Kultur. Die Ergebnisse zeigen, dass Negativismus in den Medien kein Naturgesetz ist, sondern überwunden werden kann, wenn Frieden und Versöhnung auf der Tagesordnung stehen.

  16. Força de preensão palmar em idosos com demência: estudo da confiabilidade Handgrip strength in elderly with dementia: study of reliability

    Directory of Open Access Journals (Sweden)

    Mariana A. Alencar

    2012-01-01

    Full Text Available CONTEXTUALIZAÇÃO: Instrumentos de medida devem ser analisados quanto a sua utilidade clínica e científica em diferentes populações. Apesar de o teste da força de preensão palmar (FPP ser amplamente utilizado, pouco foi investigado quanto a sua confiabilidade ao ser utilizado em idosos com demência e em qual grau de demência seria inviabilizado o seu uso. OBJETIVO: Avaliar a confiabilidade teste-reteste da FPP em idosos com diferentes graus de demência. MÉTODO: Realizou-se uma avaliação dos aspectos cognitivos de 76 idosos com demência e uma entrevista com o cuidador, permitindo a classificação do idoso segundo os critérios da Escala Clínica de Demência (Clinical dementia rating - CDR. Para essas avaliações, foram utilizados o Miniexame do Estado Mental e os questionários Pfeffer, Lawton e Katz. Vinte idosos foram classificados como grau questionável (83,4±5,8 anos; 19, como leve (82,4±6,8 anos; 19, como moderado (85,8±5,6 anos e 18, como grave (84,0±5,1 anos. Os idosos tiveram a FPP avaliada por meio de um dinamômetro hidráulico JAMAR e, após uma semana, foram reavaliados. A confiabilidade foi estimada pelo Coeficiente de Correlação Intraclasse (ICC. O nível de significância foi α=0,05. RESULTADOS: A confiabilidade teste-reteste foi excelente para os grupos que apresentaram o CDR questionável (ICC=0,975; p=0,001, leve (ICC=0,968; p=0,002 e moderado (ICC=0,964; p=0,001. A análise do grupo com CDR grave mostrou não haver uma significância estatística e um ICC baixo (ICC=0,415; p=0,376. CONCLUSÃO: O teste de FPP apresenta excelente confiabilidade ao ser utilizado em idosos com demências questionável, leve e moderada, viabilizando seu uso em pesquisas. Já em idosos classificados como graves, seu uso não é recomendado visto que a confiabilidade da medida é baixa e, portanto, sem relevância clínica para uso na prática.BACKGROUND: Measuring instruments should have their scientific and clinical value

  17. Força de preensão palmar em idosos com demência: estudo da confiabilidade Handgrip strength in elderly with dementia: study of reliability

    Directory of Open Access Journals (Sweden)

    Mariana A. Alencar

    2012-12-01

    Full Text Available CONTEXTUALIZAÇÃO: Instrumentos de medida devem ser analisados quanto a sua utilidade clínica e científica em diferentes populações. Apesar de o teste da força de preensão palmar (FPP ser amplamente utilizado, pouco foi investigado quanto a sua confiabilidade ao ser utilizado em idosos com demência e em qual grau de demência seria inviabilizado o seu uso. OBJETIVO: Avaliar a confiabilidade teste-reteste da FPP em idosos com diferentes graus de demência. MÉTODO: Realizou-se uma avaliação dos aspectos cognitivos de 76 idosos com demência e uma entrevista com o cuidador, permitindo a classificação do idoso segundo os critérios da Escala Clínica de Demência (Clinical dementia rating - CDR. Para essas avaliações, foram utilizados o Miniexame do Estado Mental e os questionários Pfeffer, Lawton e Katz. Vinte idosos foram classificados como grau questionável (83,4±5,8 anos; 19, como leve (82,4±6,8 anos; 19, como moderado (85,8±5,6 anos e 18, como grave (84,0±5,1 anos. Os idosos tiveram a FPP avaliada por meio de um dinamômetro hidráulico JAMAR e, após uma semana, foram reavaliados. A confiabilidade foi estimada pelo Coeficiente de Correlação Intraclasse (ICC. O nível de significância foi α=0,05. RESULTADOS: A confiabilidade teste-reteste foi excelente para os grupos que apresentaram o CDR questionável (ICC=0,975; p=0,001, leve (ICC=0,968; p=0,002 e moderado (ICC=0,964; p=0,001. A análise do grupo com CDR grave mostrou não haver uma significância estatística e um ICC baixo (ICC=0,415; p=0,376. CONCLUSÃO: O teste de FPP apresenta excelente confiabilidade ao ser utilizado em idosos com demências questionável, leve e moderada, viabilizando seu uso em pesquisas. Já em idosos classificados como graves, seu uso não é recomendado visto que a confiabilidade da medida é baixa e, portanto, sem relevância clínica para uso na prática.BACKGROUND: Measuring instruments should have their scientific and clinical value

  18. Biodegradable plastics in composting. Results of a practical experiment in the Bad Duerkheim district; Einsatz von biologisch abbaubaren Kunststoffen in der Kompostwirtschaft. Erkenntnisse und Erfahrungen aus dem Praxisversuch im Landkreis Bad Duerkheim

    Energy Technology Data Exchange (ETDEWEB)

    Pabst, Klaus [Abfallwirtschaftsbetrieb Landkreis Bad Duerkheim, Bad Duerkheim (Germany)

    2012-11-01

    For collecting biomass waste, about 65,000 households in the Bad Duerkheim district were given ten bags each of the compostable BASF plastic material Ecovio {sup registered} FS. The biomass waste collected in the Ecovio {sup registered} bags were composted in a composting plant. After the compost process, no residues of the Ecovio {sup registered} bags were found in the rotting, i.e. they are completely degradable. Neither the compost quality nor the working processes in the composting plant were affected, and there was no bigger volume of sorting residues. 90% of the users stated that they were satisfied with the new biomass waste bags. (orig.) [German] Fuer die Entsorgung des Bioabfalls erhielten rund 65.000 Haushalte aus dem Landkreis Bad Duerkheim je zehn Biomuelltuten aus dem kompostierbaren BASF-Kunststoff Ecovio {sup registered} FS. Die in diesen Ecovio {sup registered} -Tueten gesammelten Bioabfaelle wurden im Biokompostwerk zu Kompost verarbeitet. Nach dem Kompostierungsprozess konnten keine Reste der Ecovio {sup registered} -Folien mehr in der Rotte gefunden werden, und sie wurden vollstaendig biologisch abgebaut. Durch den Einsatz dieser Tueten wurden weder die Kompostqualitaet noch die Arbeitsablaeufe im Biokompostwerk beeintraechtigt. Eine Erhoehung der Sortierreste war nicht festzustellen. Im Rahmen einer Kundenbefragung aeusserten sich rund 90% zufrieden mit dem Einsatz dieser Biomuelltueten. (orig.)

  19. Characteristics of patients assisted at an ambulatory of dementia from a university hospital Perfil dos pacientes atendidos no ambulatório de demência de um hospital universitário

    Directory of Open Access Journals (Sweden)

    Lyssandra dos Santos Tascone

    2008-01-01

    Full Text Available OBJECTIVE: To present socio-demographic characteristics, mean scores of tests and scales applied to patients with dementia and discuss the relationship between test scores, clinical diagnoses and the severity of dementia. METHOD: Patients (n=113 were diagnosed according to the DSM-IV criteria, and the diagnostic work-up included physical and neurological examination, auxiliary exams, cognitive and functional tests, and the evaluation of neuropsychiatric symptoms. RESULTS: Mean age was 74.0 years. Alzheimer's disease (AD was diagnosed in 62.8% of the patients, AD and vascular dementia in 8.8%, other dementias in 14.2%, and mild cognitive impairment in 2.7%. At least one neuropsychiatric symptom was diagnosed in 96.9% of the sample. There were significant differences on cognitive and functional performance between the groups classified according to dementia severity. CONCLUSION: Neuropsychiatric symptoms were quite common in patients with dementia, being more frequent as severity increased, and those symptoms were associated with functional impairment in the patients.OBJETIVO: Apresentar características demográficas, escores médios de testes e escalas aplicadas aos pacientes com demência e discutir a relação dos escores dos testes com os diagnósticos clínicos e a gravidade da demência. MÉTODO: Pacientes (n=113 foram diagnosticados segundo os critérios para demência do DSM-IV, avaliados com história clínica, exame físico, exames complementares e aplicação de testes cognitivos, funcionais e neuropsiquiátricos. RESULTADOS: A idade média foi 74,0 anos. A doença de Alzheimer (DA foi diagnosticada em 62,8% dos casos, DA e demência vascular em 8,8%, outras demências em 14,2%, e comprometimento cognitivo leve em 2,7%, Ao menos um sintoma neuropsiquiátrico foi diagnosticado em 96,9% da amostra. Houve diferenças significativas nos escores dos testes cognitivos e escalas funcionais entre os grupos classificados segundo a gravidade de

  20. Research the Impacts of Classification Accuracy after Orthorectification with Different Grid Density DSM/DEM%不同格网密度的DSM/DEM对影像分类精度的影响研究

    Institute of Scientific and Technical Information of China (English)

    刘晓宏; 雷兵; 谭海; 郭建华

    2017-01-01

    DSM/DEM elevation data are used as assistant data to eliminate or limit deformation of terrain in orthorectification without control points .However , the grid density of DSM/DEM has different effect on subsequent processing , such as image classification . Based on this problem , we apply ChinaDSM 15 m DSM, ASTER GDEM 30 m DEM and SRTM 90 m DEM to do orthorectification on ZY-3 image.Then, classifying the orthorectified image by support vector machines (SVM), and comparing the classification accura-cy.It is shown that the classification accuracy after ChinaDSM 15 m DSM orthorectificated , with the same resample method ,is better than ASTER GDEM 30 m DEM and SRTM 90 m DEM.%在无控制点的卫星影像正射校正中,大多采用DSM/DEM数据作为辅助数据来消除或限制因地形起伏引起的形变,然而经不同格网密度的DSM/DEM正射校正后的影像对后续处理会产生不同程度的影响,如对地物分类精度产生影响.针对这一问题,本文分别采用不同的DSM/DEM数据(ChinaDSM 15 m、ASTER GDEM 30 m和SRTM 90 m)对资源三号影像进行正射校正,然后对正射校正后影像利用支持向量机进行分类,比较正射校正后影像结果的分类精度.结果表明:在相同重采样方法下,影像经ChinaDSM 15 m DSM正射校正后结果的分类精度优于ASTER GDEM 30 m DEM和SRTM 90 m DEM.

  1. Time-averaged discharge rate of subaerial lava at Kīlauea Volcano, Hawai‘i, measured from TanDEM-X interferometry: Implications for magma supply and storage during 2011-2013

    Science.gov (United States)

    Poland, Michael P.

    2014-01-01

    Differencing digital elevation models (DEMs) derived from TerraSAR add-on for Digital Elevation Measurements (TanDEM-X) synthetic aperture radar imagery provides a measurement of elevation change over time. On the East Rift Zone (EZR) of Kīlauea Volcano, Hawai‘i, the effusion of lava causes changes in topography. When these elevation changes are summed over the area of an active lava flow, it is possible to quantify the volume of lava emplaced at the surface during the time spanned by the TanDEM-X data—a parameter that can be difficult to measure across the entirety of an ~100 km2 lava flow field using ground-based techniques or optical remote sensing data. Based on the differences between multiple TanDEM-X-derived DEMs collected days to weeks apart, the mean dense-rock equivalent time-averaged discharge rate of lava at Kīlauea between mid-2011 and mid-2013 was approximately 2 m3/s, which is about half the long-term average rate over the course of Kīlauea's 1983–present ERZ eruption. This result implies that there was an increase in the proportion of lava stored versus erupted, a decrease in the rate of magma supply to the volcano, or some combination of both during this time period. In addition to constraining the time-averaged discharge rate of lava and the rates of magma supply and storage, topographic change maps derived from space-based TanDEM-X data provide insights into the four-dimensional evolution of Kīlauea's ERZ lava flow field. TanDEM-X data are a valuable complement to other space-, air-, and ground-based observations of eruptive activity at Kīlauea and offer great promise at locations around the world for aiding with monitoring not just volcanic eruptions but any hazardous activity that results in surface change, including landslides, floods, earthquakes, and other natural and anthropogenic processes.

  2. Combined Usage of TanDEM-X and CryoSat-2 for Generating a High Resolution Digital Elevation Model of Fast Moving Ice Stream and Its Application in Grounding Line Estimation

    Directory of Open Access Journals (Sweden)

    Seung Hee Kim

    2017-02-01

    Full Text Available Definite surface topography of ice provides fundamental information for most glaciologists to study climate change. However, the topography at the marginal region of ice sheets exhibits noticeable dynamical changes from fast flow velocity and large thinning rates; thus, it is difficult to determine instantaneous topography. In this study, the surface topography of the marginal region of Thwaites Glacier in the Amundsen Sector of West Antarctica, where ice melting and thinning are prevailing, is extracted using TanDEM-X interferometry in combination with data from the near-coincident CryoSat-2 radar altimeter. The absolute height offset, which has been a persistent problem in applying the interferometry technique for generating DEMs, is determined by linear least-squares fitting between the uncorrected TanDEM-X heights and reliable reference heights from CryoSat-2. The reliable heights are rigorously selected at locations of high normalized cross-correlation and low RMS heights between segments of data points. The generated digital elevation model with the resolved absolute height offset is assessed with airborne laser altimeter data from the Operation IceBridge that were acquired five months after TanDEM-X and show high correlation with biases of 3.19 m and −4.31 m at the grounding zone and over the ice sheet surface, respectively. For practical application of the generated DEM, grounding line estimation assuming hydrostatic equilibrium was carried out, and the feasibility was seen through comparison with the previous grounding line. Finally, it is expected that the combination of interferometry and altimetery with similar datasets can be applied at regions even with a lack of ground control points.

  3. Demography, diagnostics, and medication in dementia with Lewy bodies and Parkinson's disease with dementia: data from the Swedish Dementia Quality Registry (SveDem

    Directory of Open Access Journals (Sweden)

    Fereshtehnejad SM

    2013-06-01

    Full Text Available Seyed-Mohammad Fereshtehnejad,1 Dorota Religa,2,3 Eric Westman,1 Dag Aarsland,2,4 Johan Lökk,1,3 Maria Eriksdotter1,3 1Division of Clinical Geriatrics, Department of Neurobiology, Care Sciences, and Society (NVS, Karolinska Institutet, Stockholm, Sweden; 2Alzheimer's Disease Research Center, Department of Neurobiology, Care Sciences and Society (NVS, Karolinska Institutet, Stockholm, Sweden; 3Department of Geriatric Medicine, Karolinska University Hospital, Stockholm, Sweden; 4Centre for Age-Related Diseases, Stavanger University Hospital, Stavanger, Norway Introduction: Whether dementia with Lewy bodies (DLB and Parkinson's disease with dementia (PDD should be considered as one entity or two distinct conditions is a matter of controversy. The aim of this study was to compare the characteristics of DLB and PDD patients using data from the Swedish Dementia Quality Registry (SveDem. Methods: SveDem is a national Web-based quality registry initiated to improve the quality of diagnostic workup, treatment, and care of patients with dementia across Sweden. Patients with newly diagnosed dementia of various types were registered in SveDem during the years 2007–2011. The current cross-sectional report is based on DLB (n = 487 and PDD (n = 297 patients. Demographic characteristics, diagnostic workup, Mini-Mental State Examination (MMSE score, and medications were compared between DLB and PDD groups. Results: No gender differences were observed between the two study groups (P = 0.706. PDD patients were significantly younger than DLB patients at the time of diagnosis (74.8 versus 76.8 years, respectively; P < 0.001. A significantly higher prevalence of patients with MMSE score #24 were found in the PDD group (75.2% versus 67.6%; P = 0.030. The mean number of performed diagnostic modalities was significantly higher in the DLB group (4.9 ± 1.7 than in the PDD group (4.1 ± 1.6; P< 0.001. DLB patients were more likely than PDD patients to be treated with

  4. Constructing a paleo-DEM in an urban area by the example of the city of Aachen, Germany: Methods and previous results

    Science.gov (United States)

    Pröschel, Bernhard; Lehmkuhl, Frank

    2017-04-01

    Reconstructing paleo-landscapes in urban areas is always a special challenge since the research area often witnessed constant human impact over long time periods. Dense building development is a major difficulty, particularly in regard to accessibility to in-situ soils and archaeological findings. It is therefore necessary to use data from various sources and combine methods from different fields to gain a detailed picture of the former topography. The area, which is occupied by the city of Aachen today, looks back on a long history of human influence. Traces of human activity can be dated back to Neolithic time. The first architectural structures and the first road network were built by the Romans about 2000 years ago. From then on, the area of Aachen was more or less continuously inhabited forming today's city. This long history is represented by archaeological findings throughout the city. Several meters of settlement deposits, covering different eras, are present in many locations. Therefore, it can be assumed that the modern topography significantly differs from the pre-roman topography. The main objective of this project is a reconstruction of the paleo-topography of Aachen in order to gain new insights on the spatial preconditions that the first settlers found. Moreover, further attention is given to the question whether and to what extent a paleo-DEM can help to clarify specific open archaeological and historical questions. The main database for the reconstruction are the archaeological excavation reports of the past 150 years, provided by municipal and regional archives. After analyzing these written accounts, we linked this information to drill data, provided by the Geological Service of North Rhine-Westphalia. Together with additional sources like geological and hydrological maps, we generated a GIS-based terrain model. The result is a high-resolution terrain model, representing the undisturbed pre-roman topography of the inner city of Aachen without any

  5. MR imaging of gastric wall layers in vitro: correlation to the histologic wall structure; Experimentelle Darstellung der Schichten der Magenwand mittels MRT: Korrelation mit dem histologischen Wandaufbau

    Energy Technology Data Exchange (ETDEWEB)

    Lubienski, A.; Grenacher, L.; Schipp, A.; Duex, M. [Radiologische Klinik, Abt. Radiodiagnostik, Ruprecht-Karls-Univ. Heidelberg (Germany); Reith, W. [Abt. fuer Neuroradiologie der Radiologischen Universitaetsklinik, Univ. Saarland (Germany); Mechtersheimer, G. [Inst. fuer Allgemeine Pathologie, Ruprecht-Karls-Univ. Heidelberg (Germany)

    2002-04-01

    Purpose: To correlate gastric wall layers visible of MRI with the anatomical structure of the gastric wall. Methods: After macroscopic preparation 5 x 5 cm post-mortem tissue sections of the gastric antrum were evaluated using a 2.4 Tesla MR unit (Bruker, Ettlingen, Germany). MR imaging consisted of T2-weighted multi-spinecho sequences in longitudinal and axial directions. The specimens then were stained with hematoxylin-eosin for histological examination. After that histological correlation of the gastric wall layers visible on MRI was performed. Results: In all specimens four gastric wall layers could be clearly identified on MRI. The direct comparison of those layers to the histological findings showed the following correlation: 1. intermediate signal = mucosa, 2. hypointense signal = lamina muscularis mucosae, 3. hyperintense signal = submucosa, 4. intermediate signal = muscularis propria. Conclusions: Gastric wall layers visible on MRI were successfully correlated to the anatomic layers of the gastric wall. This allows us for the first time to classify invasion of gastric carcinoma using high spatial-resolution MR imaging. However, the subserosa and serosa are excluded from this conclusion, because so far a reliable statement concerning the value of MRI to depict these very variable layers is not possible. (orig.) [German] Ziel: Ziel der Studie war es, magnetresonanztomographisch sichtbare Schichten der Magenwand mit dem anatomischen Wandaufbau des Magens zu korrelieren. Methoden: Nach makroskopischer Skelettierung wurden 5 x 5 cm messende Stuecke des Magenantrums von fuenf Leichenmaegen in einem 2.4 Tesla MR-Geraet (Bruker, Ettlingen, Deutschland) untersucht. Es wurden T2-gewichtete Multispinechosequenzen in longitudinaler und axialer Richtung zum Praeparat angefertigt. Nach Faerbung der Magenpraeparate mit Haematoxylin-Eosin wurden die MR-Bilder mit den histologischen Schnitten in Bezug auf sichtbare Wandschichten korreliert. Ergebnisse: Regelmaessig konnten

  6. Incorporation of Rubber Powder as Filler in a New Dry-Hybrid Technology: Rheological and 3D DEM Mastic Performances Evaluation

    Directory of Open Access Journals (Sweden)

    Valeria Vignali

    2016-10-01

    Full Text Available In recent years, the use of crumb rubber as modifier or additive within asphalt concretes has allowed obtaining mixtures able to bind high performances to recovery and reuse of discarded tires. To date, the common technologies that permit the reuse of rubber powder are the wet and dry ones. In this paper, a dry-hybrid technology for the production of Stone Mastic Asphalt mixtures is proposed. It allows the use of the rubber powder as filler, replacing part of the limestone one. Fillers are added and mixed with a high workability bitumen, modified with SBS (styrene-butadiene-styrene polymer and paraffinic wax. The role of rubber powder and limestone filler within the bituminous mastic has been investigated through two different approaches. The first one is a rheological approach, which comprises a macro-scale laboratory analysis and a micro-scale DEM simulation. The second, instead, is a performance approach at high temperatures, which includes Multiple Stress Creep Recovery tests. The obtained results show that the rubber works as filler and it improves rheological characteristics of the polymer modified bitumen. In particular, it increases stiffness and elasticity at high temperatures and it reduces complex modulus at low temperatures.

  7. TecLines: A MATLAB-Based Toolbox for Tectonic Lineament Analysis from Satellite Images and DEMs, Part 2: Line Segments Linking and Merging

    Directory of Open Access Journals (Sweden)

    Mehdi Rahnama

    2014-11-01

    Full Text Available Extraction and interpretation of tectonic lineaments is one of the routines for mapping large areas using remote sensing data. However, this is a subjective and time-consuming process. It is difficult to choose an optimal lineament extraction method in order to reduce subjectivity and obtain vectors similar to what an analyst would manually extract. The objective of this study is the implementation, evaluation and comparison of Hough transform, segment merging and polynomial fitting methods towards automated tectonic lineament mapping. For this purpose we developed a new MATLAB-based toolbox (TecLines. The proposed toolbox capabilities were validated using a synthetic Digital Elevation Model (DEM and tested along in the Andarab fault zone (Afghanistan where specific fault structures are known. In this study, we used filters in both frequency and spatial domains and the tensor voting framework to produce binary edge maps. We used the Hough transform to extract linear image discontinuities. We used B-spline as a polynomial curve fitting method to eliminate artificial line segments that are out of interest and to link discontinuous segments with similar trends. We performed statistical analyses in order to compare the final image discontinuities maps with existing references map.

  8. A aparição do demônio na fábrica, no meio da produção

    Directory of Open Access Journals (Sweden)

    JOSÉ DE SOUZA MARTINS

    1993-12-01

    Full Text Available A aparição do demônio, várias vezes, durante uma semana, em uma grande fábrica do subúrbio da cidade de São Paulo, em 1956, foi uma indicação de que os fenômenos de demonização podem ocorrer também fora do mundo tradicional e rural dos camponeses. Também os operários da moderna indústria estão sujeitos à invocação do imaginário arcaico para compreender as mudanças tecnológicas na produção. Quando a modernização industrial introduz uma separação radical entre o pensar e o fazer no processo de trabalho, o imaginário arcaico pode preencher esse vazio para lhe dar sentido: o sentido que sua irracionalidade pode ter.

  9. Ethanol electrooxidation on a carbon-supported Pt catalyst at elevated temperature and pressure: A high-temperature/high-pressure DEMS study

    Science.gov (United States)

    Sun, S.; Halseid, M. Chojak; Heinen, M.; Jusys, Z.; Behm, R. J.

    The electrooxidation of ethanol on a Pt/Vulcan catalyst was investigated in model studies by on-line differential electrochemical mass spectrometry (DEMS) over a wide range of reaction temperatures (23-100 °C). Potentiodynamic and potentiostatic measurements of the Faradaic current and the CO 2 formation rate, performed at 3 bar overpressure under well-defined transport and diffusion conditions reveal significant effects of temperature, potential and ethanol concentration on the total reaction activity and on the selectivity for the pathway toward complete oxidation to CO 2. The latter pathway increasingly prevails at higher temperature, lower concentration and lower potentials (∼90% current efficiency for CO 2 formation at 100 °C, 0.01 M, 0.48 V), while at higher ethanol concentrations (0.1 M), higher potentials or lower temperatures the current efficiency for CO 2 formation drops, reaching values of a few percent at room temperature. These trends result in a significantly higher apparent activation barrier for complete oxidation to CO 2 (68 ± 2 kJ mol -1 at 0.48 V, 0.1 M) compared to that of the overall ethanol oxidation reaction determined from the Faradaic current (42 ± 2 kJ mol -1 at 0.48 V, 0.1 M). The mechanistic implications of these results and the importance of relevant reaction and mass transport conditions in model studies for reaction predictions in fuel cell applications are discussed.

  10. Eine polizeiliche ‚Moral‘ der Demütigung. Nebeneffekte der ‚Kriminalitätsbekämpfung‘ in einem französischen Vorort

    Directory of Open Access Journals (Sweden)

    Mélina Germes

    2014-10-01

    Full Text Available Im Anschluss an eine langfristige ethnographische Beobachtung der Arbeit einer Brigade Anti-Criminalité (Einheit zur Kriminalitätsbekämpfung; im Folgenden: BAC in einem Pariser Vorort zwischen 2005 und 2007 hat der Anthropologe Didier Fassin im Jahr 2011 das Buch La force de l'ordre. Une anthropologie de la police des quartiers veröffentlicht, das zu einem Meilenstein in der französischen Polizeiforschung geworden ist und einen wichtigen Beitrag auch zur öffentlichen Debatte geleistet hat. Diese Debatte um das Polizieren der ,Viertelʼ beschäftigt sich mit den diskursiven, organisatorischen und alltagsweltlichen Hintergründen der Polizeiarbeitum wiederholte Identitätskontrollen, ethnischen Diskriminierung und exzessiver Gewaltanwendung zu beschreiben und einzuordnen. Ziel der Untersuchung Fassins in Kontext dieser Debatte ist es, die Polizeiarbeit in den ,Viertelnʼ zu begleiten, zu hinterfragen sowie zu erklären, was diese Polizeiarbeit über die französische Gesellschaft aussagt. Der für dieses Heft von s u b \\ u r b a n übersetzte Auszug aus dem vierten Kapitel seines Buches reflektiert den Begriff von ,Gewaltʼ (zu weiteren Begriffserläuterung vgl. den Textauszug von Fassin in Bezug auf die Polizeiarbeit und unterscheidet zwischen physischer, körperlicher Gewalt und unsichtbaren Formen von psychischer und verbaler Gewalt.  

  11. Fantasmagorias e fantasmas em dois romances de Rui Mourão: Boca de Chafariz e Os demônios descem o morro.

    Directory of Open Access Journals (Sweden)

    Ruth Silviano Brandão

    2016-05-01

    Full Text Available Este artigo analisa dois romances de Rui Mourão, Boca de chafariz e Os demônios descem o morro, com uma base teórica de Walter Benjamin, através de seus conceitos sobre a história, a melancolia, o barroco mineiro, a fantasmagoria. Além de Benjamin, recorremos a algumas ideias pontuais de Luciano de Samósata sobre como escrever história, principalmente sua relação com a verdade e a ficção. Os conceitos dos dois autores teóricos, Benjamin e Luciano, tangenciam-se em alguns pontos e, segundo nosso ponto de vista, favorecem um diálogo, tanto no plano ficcional, como com o histórico, através de figuras de outros séculos, presentes como fantasmas, que também dialogam com nosso presente, tornando os romances polissêmicos, pelo jogo de vozes. O método de leitura é comparativo, já que se articulam valores de duas culturas, vários autores, apresentando revisões da história, sob o olhar contemporâneo.

  12. O atomismo de Leucipo e Demócrito: sua possibilidade de atuação como ferramenta interpretativa acerca do núcleo essencial de direitos fundamentais

    Directory of Open Access Journals (Sweden)

    Denny Mendes Santiago

    2012-03-01

    Full Text Available Este artigo tem como objetivo apresentar as teorias dos atomistas Leucipo e Demócrito, relacionando-as com a idéia de núcleo essencial dos direitos fundamentais, idéia esta própria do contexto paradigmático do Estado Democrático de Direito em que o Brasil se inseriu quando da promulgação da Constituição de 1988.

  13. Investigations on pretreatment of waste prior to fermentation by percolation using the ISKA {sup registered} process; Untersuchungen zur Vorbehandlung von Abfaellen vor der Vergaerung mittels Perkolation nach dem ISKA {sup registered} -Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Santen, H. [Technische Univ. Braunschweig (Germany). FG Abfallwirtschaft; Fricke, K. [Technische Univ. Braunschweig (Germany). Lehrstuhl Abfallwirtschaft; Engelhard, T.; Widmer, C. [ISKA GmbH, Ettlingen (Germany)

    2004-07-01

    Waste treatment prior to fermentation is a key aspect in achieving economic efficiency. One process is presented here in particular: percolation, in which waste is hydrolyzed aerobically, treated mechanically, and washed out with the aid of process water. The process involves a percolation stage followed by a fermentation stage. The process water burdened with organic matter is passed into a fermentation reactor in which the organic components are reacted anaerobically into biogas and bacterial mass, and the process water is recirculated into the percolation reactor. (orig.) [German] Vergaerungstechnologien zaehlen zu den etablierten Verfahren zur Gewinnung regenerativer Energien aus Biomasse. Fuer die Energieeffizienz dieser Verfahren sind die Leistung der Vergaerungsstufe, die Hoehe der Verfuegbarkeit der anaerob abzubauenden organischen Substanzen und der spezifische Energiebedarf des Behandlungsverfahrens massgeblich. Eine Schluesselstellung fuer die Optimierung beider Faktoren nimmt die Abfallaufbereitung vor der Vergaerung ein. Eine Technoloie zur Aufbereitung vor der Vergaerung basiert auf dem Verfahren der Perkolation, in der der Abfall aerob hydrolysiert,mechanisch aufgeschlossen und durch Zugabe von Prozesswasser ausgewaschen wird. Das Verfahren besteht aus einer Aufbereitung - der Perkolation - sowie einer nachgeschalteten Vergaerung. Das mit vergaerbarer Organik beladene Prozesswasser wird einem Vergaerungsreaktor zugefuehrt, in dem die organischen Komponenten anaerob zu Biogas und Bakterienmasse umgesetzt werden. Das aufbereitete Prozesswasser wird anschliessend wieder dem Perkolationsreaktor zugefuehrt. (orig.)

  14. An automated, open-source (NASA Ames Stereo Pipeline) workflow for mass production of high-resolution DEMs from commercial stereo satellite imagery: Application to mountain glacies in the contiguous US

    Science.gov (United States)

    Shean, D. E.; Arendt, A. A.; Whorton, E.; Riedel, J. L.; O'Neel, S.; Fountain, A. G.; Joughin, I. R.

    2016-12-01

    We adapted the open source NASA Ames Stereo Pipeline (ASP) to generate digital elevation models (DEMs) and orthoimages from very-high-resolution (VHR) commercial imagery of the Earth. These modifications include support for rigorous and rational polynomial coefficient (RPC) sensor models, sensor geometry correction, bundle adjustment, point cloud co-registration, and significant improvements to the ASP code base. We outline an automated processing workflow for 0.5 m GSD DigitalGlobe WorldView-1/2/3 and GeoEye-1 along-track and cross-track stereo image data. Output DEM products are posted at 2, 8, and 32 m with direct geolocation accuracy of process individual stereo pairs on a local workstation, the methods presented here were developed for large-scale batch processing in a high-performance computing environment. We have leveraged these resources to produce dense time series and regional mosaics for the Earth's ice sheets. We are now processing and analyzing all available 2008-2016 commercial stereo DEMs over glaciers and perennial snowfields in the contiguous US. We are using these records to study long-term, interannual, and seasonal volume change and glacier mass balance. This analysis will provide a new assessment of regional climate change, and will offer basin-scale analyses of snowpack evolution and snow/ice melt runoff for water resource applications.

  15. Digital Elevation Model (DEM), LiDAR acquired and processed over the entire county to support the generation of 1"=100' scale orthophotos & 2' contours. The Lidar LAS data has been classified to bare-earth as well as first-return points., Published in 2009, 1:1200 (1in=100ft) scale, Maryland National Capital Park and Planning Commission.

    Data.gov (United States)

    NSGIC Non-Profit | GIS Inventory — Digital Elevation Model (DEM) dataset current as of 2009. LiDAR acquired and processed over the entire county to support the generation of 1"=100' scale orthophotos...

  16. [Dimitri Steinke: Die Zivilrechtsordnungen des Baltikums unter dem Einfluss ausländischer, insbesondere deutscher Rechtsquellen. (Osnabrücker Schriften zur Rechtsgeschichte, Bd. 16.) V&R unipress. Göttingen 2009. 243 S. ISBN 978-3-89971-573-6] / M

    Index Scriptorium Estoniae

    Luts-Sootak, Marju, 1966-

    2011-01-01

    Arvustus: Dimitri Steinke. Die Zivilrechtsordnungen des Baltikums unter dem Einfluss ausländischer, insbesondere deutscher Rechtsquellen. (Osnabrücker Schriften zur Rechtsgeschichte ; 16). Göttingen, 2009

  17. Is MTHFR polymorphism a risk factor for Alzheimer's disease like APOE? Polimorfismo da MTHFR é um fator de risco para demência de Alzheimer como APOE?

    Directory of Open Access Journals (Sweden)

    Liana Lisboa Fernandez

    2005-03-01

    Full Text Available BACKGROUND: The role of methylenetetrahydrofolate reductase (MTHFR gene polymorphisms as risk factors for the occurence of Alzheimer's disease (AD is still controversial: OBJECTIVE: To verify the association between MTHFR and apolipoprotein E (APOE polymorphisms and Alzheimer's disease. METHOD: This work was conducted as a case-control study. Cases included thirty patients with probable AD. Controls were constituted by 29 individuals without dementia according to neuropsychological tests paired to age, sex, race and educational level. DNA was isolated from peripheral leukocytes of anticoagulated venous blood. Genotyping of APOE and MTHFR were performed by DNA amplification and digestion. The frequences of APOE and MTHFR genotypes were submitted by chi-square test corrected by Fisher test; the APOE genotypes, to chi-square linear tendency test and the frequences of MTHFR mutant and AD, by stratificated anlysis adjust by Mantel-Haenszel method. RESULTS: There was significant difference about APOE4 and APOE2 in the groups. (p=0.002 The odds ratio increased exponentially with the increased number of E4 allele (chi2 linear tendency test. No significant difference was detected on MTHFR genotypes in both case and control groups. CONCLUSION: The APOE4 is a risk factor and demonstrated a dose-depenent effect while APOE2 allele conferred a protection to AD. The MTHFR mutation had no correlation with AD.INTRODUÇÃO: O papel do polimorfismo do gene da metilenotetrahidrofolato redutase (MTHFR como um fator de risco para demência de Alzheimer (DA é controverso ainda. OBJETIVO: Verificar a associação entre os polimorfismos da MTHFR e apolipoproteína E (APOE e DA. MÉTODO: O trabalho foi conduzido como um estudo caso-controle. Trinta pacientes com DA provável foram incluídos no grupo caso. Vinte e nove indivíduos sem demência comprovadas por testes neuropsicológicos, emparelhados pela idade, sexo, cor e nível educacional constituíram o grupo

  18. Mobilization of PAH by synthetic gastrointestinal juice from contaminated soil of a former landfill area; Mobilisierung von PAK durch synthetische Verdauungssaefte aus dem kontaminierten Bodenmaterial einer Altlastenflaeche

    Energy Technology Data Exchange (ETDEWEB)

    Hack, A.; Selenka, F.; Wilhelm, M. [Bochum Univ. (Germany). Abt. fuer Hygiene, Sozial- und Umweltmedizin

    1998-10-01

    In the present study, the amount of polycyclic aromatic hydrocarbons (PAH) in contaminated soil material, which may be available for absorption in the gastrointestinal tract, is estimated by means of evaluating the PAH mobilization by synthetic gastric and intestinal juice in an in vitro test system. Five contaminated soil materials from a former landfill site are analysed in this gastrointestinal model for the PAH of the U.S.EPA-standard. For quantification, an HPLC method with reversed-phase chromatography and on line fluorescence detection is used. The PAH concentration of the contaminated soil materials ranged from 37 {mu}g/g up to 196 {mu}g/g in total. The mobilization of the PAH in the gastrointestinal model ranged from 0.3% up to 1.3% when gastrointestinal juice was used alone. In the presence of whole milk powder, however, the mobilization was enhanced to values from 10.8% up to 14.5%. Since the soil material was taken from different parts of the contaminated area, and since the mobilization of the PAH from the different materials shows only minor differences, the mobilization data evaluated may be considered as representative for the whole contaminated area. Compared to other contaminated soil materials, especially those from gas work areas or coke plants, the mobilization rate of PAH by the gastrointestinal model from the soil materials used in this study is low. The health risk caused, by ingestion of this soil material, as far as PAH are concerned, is actually smaller than the risk calculated from the total content of PAH of the contaminated soil. (orig.) [Deutsch] Im allgemeinen wird nur ein Teil der Schadstoffe aus oral aufgenommenem kontaminiertem Bodenmaterial im Gastrointestinaltrakt resorbiert. In der vorliegenden Studie wird der resorptionsverfuegbare Anteil der PAK aus dem real kontaminierten Bodenmaterial einer ehemaligen Deponie aus dem sueddeutschen Raum anhand der Mobilisierbarkeit der PAK durch die Verdauungssaefte des oberen

  19. Representações sociais de cuidadores principais de pacientes com demência Social representations of main caretakers of patients with dementia

    Directory of Open Access Journals (Sweden)

    Daniela Chiari Rizzo

    2008-04-01

    Full Text Available INTRODUÇÃO: As síndromes depressivas e demenciais são os problemas mentais mais prevalentes na população idosa. A qualidade de vida de pacientes com demência depende, primordialmente, daqueles que são responsáveis pelos seus cuidados. Assim, é fundamental a realização de estudos que possam descrever as percepções, interpretações e reações dos cuidadores frente aos diversos tipos de síndromes demenciais, as estratégias encontradas para enfrentá-las associadas aos diferentes atores e a mobilização de referentes culturais em torno da experiência da demência. MÉTODO: No presente estudo, com base na teoria das representações sociais, foram entrevistados 15 cuidadores, visando compreender como estes reconhecem e vivenciam a síndrome demencial e quais são as ações realizadas por eles para lidar com a mesma. RESULTADOS: A análise de conteúdo indicou que o prejuízo nas atividades instrumentais foram os primeiros sinais que alertaram os cuidadores para o problema de seus familiares. Ao mesmo tempo em que os cuidadores consideram eventos de vida, organicidade e hereditariedade para explicar o problema do familiar, levantam também outros aspectos que estão intimamente associados ao contexto sociocultural, influenciando as ações diante das manifestações da síndrome demencial. CONCLUSÃO: Essas são informações essenciais para o planejamento de intervenções e políticas públicas adequadas às características dessa população.INTRODUCTION: Depressive symptoms and dementia are the most prevalent mental problems among the elderly. The quality of life of patients suffering from these disorders depends mostly on their caretakers. Therefore, it is of paramount importance to conduct research studies describing the caretaker's perceptions, interpretations and actions in relation to different types of dementia disorders, coping strategies developed associated with different actors and mobilization of cultural references

  20. Theoretical and experimental studies on the improvement of the time structure of the extracted electron beam from the stretcher ring ELSA; Theoretische und experimentelle Untersuchungen zur Verbesserung der Zeitstruktur des extrahierten Elektronenstrahls aus dem Stretcherring ELSA

    Energy Technology Data Exchange (ETDEWEB)

    Neckenig, M.

    1993-03-01

    The Electron Stretcher Accelerator ELSA of Bonn University is the first electron-pulse-stretcher-ring in the GeV-range. It delivers an external electron beam in the energy range from 500 MeV to 3.5 GeV, with a current between 10 pA and 100 nA, depending on the demands of the experiments. A synchrotron is used to preaccelerate the electrons to energies between 500 MeV and 1.8 GeV. In this energy-range, ELSA is used in the pure stretcher-mode, whereas for higher energies it is used as a post accelerator. For beam extraction, a third-integer resonance, driven by sextupoles, is applied. The problems, delimiting the duty-factor of the extracted beam in the pure stretcher-mode, have been investigated and solved. In this mode, duty-factors - measured by coincidence methods - of up to 55% have been reached, which are of the order of the theoretical limit for the applied extraction method of about 60%. (orig.) [Deutsch] Ziel dieser Arbeit war es, die Phaenomene, die das Tastverhaeltnis des aus ELSA extrahierten Strahles beeinflussen, zu verstehen. Aus dem gewonnenen Verstaendnis heraus sollten Massnahmen getroffen werden, um das Tastverhaeltnis zu verbessern. Die Effekte, die ein gutes Tastverhaeltnis in der Vergangenheit verhindert haben, waren in der Hauptsache ein Stromrippel in den Netzgeraeten der Hauptmagnete sowie die Extraktion aus dem Synchrotron, die nur eine schlechte Fuellung von ELSA erlaubte. Der Rippel wurde durch den Einbau von Filtern in die Netzgeraete behoben. Bei den gegenwaertigen Extraktionszeiten von 20 msec spielt der Rippel nur noch eine geringe Rolle. Die Extraktion aus dem Synchrotron wurde modifiziert, so dass ohne Beschaffung neuer Komponenten eine Verbesserung der ELSA-Fuellung von 40% auf maximal 75% moeglich wurde. Durch eine Reihe von Massnahmen konnte der Wert des Tastverhaeltnisses von 6%-7% kurz nach der Inbetriebnahme auf heute 50%-55% gesteigert werden. Die Extraktion kann durch ein einfaches Modell beschrieben werden, dass alle

  1. Prevalence of presenile dementia in a tertiary outpatient clinic Prevalência de demência pré-senil num ambulatório terciário

    Directory of Open Access Journals (Sweden)

    Satomi Fujihara

    2004-09-01

    Full Text Available There are very few reports about prevalence of presenile dementia in Brazil. We reviewed files of patients evaluated with early onset of cognitive impairment in our institution. Among 141 patients (61% males there was no difference between gender by age at onset or at first evaluation. We have observed an increasing number of patients after 50 years. The most frequent causes were: vascular dementia (36.9%, Alzheimer's disease (20.3% and traumatic brain injury (9.2%. There was difference among dementia type by age of onset and first evaluation, educational level and length of dementia. These results may be compared with those from other neurologic services in order to replicate or confirm these results.Em nosso meio há raros estudos que verifiquem quais as causas mais prevalentes de demência pré-senil. Avaliamos retrospectivamente os prontuários de pacientes com início precoce de alterações cognitivas, ambulatório de Neurologia da Cognição do Hospital Santa Marcelina. Entre os 141 sujeitos (61% de homens não houve diferença quanto às idades de início e à primeira consulta e escolaridade entre os sexos. Observamos aumento no número de demência após os 50 anos. A causa mais freqüente foi vascular (36,9%, seguida por doença de Alzheimer (20,3% e secundária a trauma cranio encefálico (9,2%. Houve diferença entre os tipos de demência quanto à idade na primeira consulta e idade de início, escolaridade e duração do quadro. Ao contrário de outros estudos o diagnóstico mais freqüente foi demência vascular. Novos estudos em nosso meio deverão ser realizados para avaliar este achado nas demências de início precoce.

  2. Assessment and Reporting of Driving Fitness in Patients with Dementia in Clinical Practice: Data from SveDem, the Swedish Dementia Registry.

    Science.gov (United States)

    Lovas, Joel; Fereshtehnejad, Seyed-Mohammad; Cermakova, Pavla; Lundberg, Catarina; Johansson, Björn; Johansson, Kurt; Winblad, Bengt; Eriksdotter, Maria; Religa, Dorota

    2016-05-05

    Driving constitutes a very important aspect of daily life and is dependent on cognitive functions such as attention, visuo-spatial skills and memory, which are often compromised in dementia. Therefore, the driving fitness of patients with dementia needs to be addressed by physicians and those that are deemed unfit should not be allowed to continue driving. We aimed at investigating to what extent physicians assess driving fitness in dementia patients and determinant factors for revoking of their licenses. This study includes 15113 patients with newly diagnosed dementia and driver's license registered in the Swedish Dementia Registry (SveDem). The main outcomes were reporting to the licensing authority and making an agreement about driving eligibility with the patients. Physicians had not taken any action in 16% of dementia patients, whereas 9% were reported to the authority to have their licenses revoked. Males (OR = 3.04), those with an MMSE score between 20-24 (OR = 1.35) and 10-19 (OR = 1.50), patients with frontotemporal (OR = 3.09) and vascular dementia (OR = 1.26) were more likely to be reported to the authority. For the majority of patients with dementia, driving fitness was assessed. Nevertheless, physicians did not address the issue in a sizeable proportion of dementia patients. Type of dementia, cognitive status, age, sex and burden of comorbidities are independent factors associated with the assessment of driving fitness in patients with dementia. Increased knowledge on how these factors relate to road safety may pave the way for more specific guidelines addressing the issue of driving in patients with dementia.

  3. Caracterização clínica da demência vascular: avaliação retrospectiva de uma amostra de pacientes ambulatoriais

    Directory of Open Access Journals (Sweden)

    Smid Jerusa

    2001-01-01

    Full Text Available OBJETIVO: analisar as características clínicas e as condições mórbidas (CM associados em uma amostra de pacientes com demência vascular (DV. MÉTODOS: foram estudados retrospectivamente 25 pacientes com diagnóstico de DV, estabelecidos com base critérios do grupo State of California Alzheimer´s Disease Diagnostic and Treatment Centers (ADDTC. Os dados clínicos e de neuroimagem e os exames laboratoriais foram computados para caracterização da amostra. RESULTADOS: a média da faixa etária foi de 68,7 ± 14,6 anos (64,0% homens, com escolaridade média de 5,2 ± 4,4 anos. A instalação súbita do quadro foi observada em 48,0% dos pacientes e a evolução em degraus e o curso flutuante, em 4,0% e 16,0% dos casos, respectivamente. Apresentavam déficit neurológico focal como sintoma inicial 48,0%, sendo constatado déficit ao exame em 80,0%. As principais CM foram: hipertensão arterial sistêmica (92,0%; hipercolesterolemia (64,0%; insuficiência coronariana (40,0%; tabagismo (40,0%; hipertrigliceridemia (36,0%; diabete melito (32,0%; doença de Chagas (8,0%. CONCLUSÕES: observou-se forte correlação entre DV e hipertensão e hipercolesterolemia. A presença de dois pacientes com doença de Chagas sugere que esta doença possa constituir possível fator de risco regional.

  4. Anti-nuclear liberals and the bomb: A comparative history of Kampf dem Atomtod and the Committee for a Sane Nuclear Policy, 1957-1963

    International Nuclear Information System (INIS)

    Thiede, B.

    1992-01-01

    The premises of Kampf dem Atomtod (KdA) and Citizens for a Sane Nuclear Policy (SANE) were based on nineteenth century traditions of liberal peace advocacy. Both groups gained substantial public support for their goals to prevent the nuclear armament of the Bundeswehr and to stop nuclear testing. Both organizations won well-educated middle-class and mostly white supporter. The dissertation examines the role of women: whether housewife or doctor, women stressed their special concerns as mothers. Both KdA and SANE had troubled relations with the labor movement. Their leaders hoped to gain government leaders' respect by winning a respectable, non-Communist constituency and claiming their goals were reasonable ones. Government officials attacked KdA and SANE as dupes of Moscow. Many supporters left the organizations because of their strict anti-Communism. Local groups accused their leaders of lacking initative. KdA and SANE's leaders wasted time and energy rehashing issues and postponing decisions. After a period of providing initiatives and ideas local committees disintegrated. Both organizations considered education their paramount goal but their arguments primarily reached the converted, who often preferred more political action. KdA and SANE's leaders instead chose to support respectable projects based on humanitarian ideals. Since these projects offered little in the way of concrete action agendas, supporters defected to more active organizations or slipped into apathy. Neither organization achieved its national goals. Both governments generally denied them access to the policymaking process, ignored them as irrelavant, or attacked them as Communist sympathizers. While SANE and KdA were heard by those concerned by nuclear policy, and while members of SANE's National Board did help muster support for the Partial Test Ban Treaty, both organizations failed to make liberal peace values productive in the nuclear decisionmaking process

  5. The industrial application of fracture mechanics concepts discussed at the background of international standards and guidelines; Die industrielle Anwendung bruchmechanischer Konzepte vor dem Hintergrund internationaler Bewertungsvorschriften und Regelwerke

    Energy Technology Data Exchange (ETDEWEB)

    Zerbst, U. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Werkstofforschung; Langenberg, P. [Ingenieurbuero fuer Werkstofftechnik, Aachen (Germany)

    2000-07-01

    Many features from the background for an intensified application of fracture mechanics concepts in many industries world-wide. These include requirements for a permanent increase of the level of performance of technical components and structures by the introduction of new materials, joining technologies and design principles, the problem of ageing components and life extension, an increased emphasis on non-destructive in-service inspection combined with improved NDT techniques, and also a number of failure events caused by fatigue and fracture The aim of the present paper is to give a brief state-of-the-art review on how fracture mechanics is applied in different industrial branches today. This is based on standards and guidelines in the aerospace industry, in the nuclear and fossil power generation, in the chemical and petrochemical and the pipeline industry, in civil engineering, offshore technique and other fields. Based on the review an outlook is given on a future development that would be reasonable and desirable from the point of view of a basically unified philosophy of fracture mechanics application. (orig.) [German] Die Erhoehung der Leistungsparameter vieler Maschinen und Anlagen verbunden mit dem Einsatz neuer Werkstoffe, Fuegeverfahren und Konstruktionsprinzipien, der Betrieb vieler Strukturen ueber ihre projektierte Lebensdauer hinaus, technische Verbesserungen und ein durchgaengigerer Einsatz zerstoerungsfreier Defektpruefverfahren, aber auch immer wieder einmal auftretende Schadensfaelle bilden den Hintergrund fuer die zunehmende Nutzung bruchmechanischer Bewertungsvorschriften in der industriellen Praxis. Die vorliegende Studie zieht eine momentane Bilanz dieser Entwicklung am Beispiel von Fachbereichsstandards der Luft- und Raumfahrtindustrie, der konventionellen und Kernkrafttechnik, der Chemie und Petrochemie, der Pipelineindustrie, des Stahlbaus, der Offshore-Technik und anderer Bereiche. Ausgehend von dieser Bestandsaufnahme wird ein Ausblick

  6. Carry-over of plant protection agents through wet deposition on the Kleine Feldberg/Taunus; Eintrag von Pflanzenschutzmitteln durch nasse Deposition auf dem Kleinen Feldberg/Taunus

    Energy Technology Data Exchange (ETDEWEB)

    Gath, B. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Jaeschke, W. [Zentrum fuer Umweltforschung der Johann Wolfgang Goethe-Universitaet, Frankfurt am Main (Germany); Kubiak, R. [Landes-Lehr- und Forschungsanstalt fuer Landwirtschaft, Weinbau und Gartenbau, Neustadt an der Weinstrasse (Germany); Ricker, I. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany); Schmider, F. [BASF AG, Landwirtschaftliche Versuchsstation, Limburgerhof (Germany); Zietz, E. [Battelle Europe Battelle-Institut e.V., Frankfurt am Main (Germany)

    1993-11-01

    On the Feldberg and at two more sites precipitation samples were taken and analysed for selected pesticides (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl and atrazine). Bulk samplers (acc. to Daemmgen) were used in 14-day intervals. At two stations wet-only samplers were used in addition to the bulk samplers. Parathion-ethyl, Pirimicarb and Triadimenol were only found in single cases only. Distinct annual curves could be established for atrazin and isoproturon, they are shown in desposition charts. Only Lindan was detectable all year round. Concentrations were between 3 and 300 ng l{sup {minus}1}. Annual curves show good correlation with application periods of the individual substances. In general the annual mean value of the concentrations are below 50 ng l{sup {minus}1}. The share of dry deposition depends on substance and weather and account roughly for 10-20% of total deposition. (orig./EW) [Deutsch] Auf dem Feldberg sowie an zwei weiteren Messstandorten wurden parallel Niederschlagsproben genommen und auf ausgewaehlte Pestizide (Lindan, Isoproturon, Triadimenol, Pirimicarb, Parathion-ethyl und Atrazin) untersucht. Die Probenahme erfolgte in bulk-Sammlern nach Daemmgen in 14-Tage Intervallen. An zwei Stationen wurden parallel zu den bulk-Sammlern auch wet-only Sammler betrieben. Parathion-ethyl, Pirimicarb und Triadimenol konnten nur vereinzelt nachgewiesen werden. Von Atrazin und Isoproturon wurden ausgepraegte Jahresgaenge ermittelt und in Depositionsgraphiken dargestellt. Lediglich Lindan war nahezu das ganze Jahr ueber nachweisbar. Die gemessenen Konzentrationen lagen zwischen 3 und 300 ng 1{sup -1}. Die dargestellten Jahresgaenge korrelieren gut mit den jeweiligen Anwendungszeitraeumen der einzelnen Substanzen. Insgesamt liegen die gemessenen Konzentrationen im Jahresmittel unter 50 ngl{sup -1}. Der Beitrag der trockenen Deposition ist substanz- und wetterabhaengig und macht etwa 10-20% der Gesamtdeposition aus. (orig.)

  7. Ethanol electrooxidation on a carbon-supported Pt catalyst at elevated temperature and pressure: A high-temperature/high-pressure DEMS study

    Energy Technology Data Exchange (ETDEWEB)

    Sun, S.; Halseid, M. Chojak; Heinen, M.; Jusys, Z.; Behm, R.J. [Institute of Surface Chemistry and Catalysis, Ulm University, D-89069 Ulm (Germany)

    2009-05-01

    The electrooxidation of ethanol on a Pt/Vulcan catalyst was investigated in model studies by on-line differential electrochemical mass spectrometry (DEMS) over a wide range of reaction temperatures (23-100 C). Potentiodynamic and potentiostatic measurements of the Faradaic current and the CO{sub 2} formation rate, performed at 3 bar overpressure under well-defined transport and diffusion conditions reveal significant effects of temperature, potential and ethanol concentration on the total reaction activity and on the selectivity for the pathway toward complete oxidation to CO{sub 2}. The latter pathway increasingly prevails at higher temperature, lower concentration and lower potentials ({proportional_to}90% current efficiency for CO{sub 2} formation at 100 C, 0.01 M, 0.48 V), while at higher ethanol concentrations (0.1 M), higher potentials or lower temperatures the current efficiency for CO{sub 2} formation drops, reaching values of a few percent at room temperature. These trends result in a significantly higher apparent activation barrier for complete oxidation to CO{sub 2} (68 {+-} 2 kJ mol{sup -1} at 0.48 V, 0.1 M) compared to that of the overall ethanol oxidation reaction determined from the Faradaic current (42 {+-} 2 kJ mol{sup -1} at 0.48 V, 0.1 M). The mechanistic implications of these results and the importance of relevant reaction and mass transport conditions in model studies for reaction predictions in fuel cell applications are discussed. (author)

  8. Non-destructive testing of concrete structures with the impact-echo method; Zerstoerungsfreie Pruefung von Betonbauteilen mit dem Impact-Echo-Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Algernon, Daniel; Feistkorn, Sascha; Scherrer, Michael [SVTI Schweizerischer Verein fuer technische Inspektionen, Wallisellen (Switzerland). Nuklearinspektorat

    2016-05-01

    The impact-echo method is based on the use of elastic waves. It was developed in the 1980 for the testing of concrete structures and is currently widespread. Main application areas are the component and coating thickness measurement and detection of delaminations, voids and other defects. Specifically, the method is also used to check the injection faults of clamping channels. Another application is the determination of mechanical material parameters such as the modulus of elasticity. Since the original development of the method has undergone several enhancements. The conversion of a single-point measurement method towards a area component testing, the use by the optimized measurement data acquisition and evaluation enlarged and delivered an important prerequisite for increasing the efficiency. The use of air-coupled sensors not only increases the measurement speed but also provides advantages in rough component surfaces. The imaging analysis in conjunction with signal processing algorithms simplifies the interpretation and allows statistical evaluation. [German] Das Impact-Echo-Verfahren beruht auf der Nutzung elastischer Wellen. Es wurde in den 1980er Jahren fuer die Pruefung von Stahlbetonbauteilen entwickelt und ist derzeit weit verbreitet. Haupteinsatzgebiete sind die Bauteil- und Schichtdickenmessung sowie die Detektion von Delaminationen, Hohl- und anderen Fehlstellen. Insbesondere wird das Verfahren auch zur Pruefung des Verpresszustandes von Spannkanaelen herangezogen. Eine weitere Anwendung ist die Bestimmung mechanischer Materialparameter wie dem Elastizitaetsmodul. Seit der urspruenglichen Entwicklung hat das Verfahren verschiedene Weiterentwicklungen erfahren. Die Ueberfuehrung von einem Einzelpunktmessverfahren hin zu einer flaechigen Bauteilpruefung hat die Einsatzmoeglichkeiten durch die optimierte Messdatenaufnahme und -auswertung vergroessert und eine wichtige Voraussetzung zur Erhoehung der Leistungsfaehigkeit geliefert. Der Einsatz

  9. Begegnungen mit dem 'grossen Anderen'

    DEFF Research Database (Denmark)

    Halse, Sven

    2008-01-01

    I så godt som alle fortællingerne i Bunte Steine udgør spørgsmålet om egenidentitet et centralt tema. I artiklen analyseres fortællingernes forhandling, etablering og forandring af kulturel identitet gennem mødet med det store Andet, det være sig i form af uhørte naturfænomener, historiske hændel...

  10. Die Jagd nach dem Allerkleinsten

    CERN Multimedia

    Wolter, Uwe

    2006-01-01

    Only with probes and telescopes scientists do not explore the universe. To understand the processes in the cosmos, researchers feign Big Bang in gigantic devices and look with extremely sensitive detectors for the most elementary particles (1 page)

  11. 2015 OLC Lidar DEM: Chelan

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Quantum Spatial has collected Light Detection and Ranging (LiDAR) data for the Oregon LiDAR Consortium (OLC) Chelan FEMA study area. This study area is located in...

  12. [Aus dem Schrifttum] / Carmen Schmidt

    Index Scriptorium Estoniae

    Schmidt, Carmen, 1956-

    1999-01-01

    Arvustus: Die selbstverwaltete Gemeinde : Beiträge zu ihrer Vergangenheit, Gegenwart und Zukunft in Estland, Deutschland und Europa / Hrsg. W. Drechsler. - Berlin, 1999. - 128 S. (Schriften zum öffentlichen Recht ; 784). Arvustus artiklite kogumikule, mis on pühendatud Lübecki linnaõiguse 750.-le aastapäevale

  13. Evaluation of morphometric parameters derived from Cartosat-1 DEM using remote sensing and GIS techniques for Budigere Amanikere watershed, Dakshina Pinakini Basin, Karnataka, India

    Science.gov (United States)

    Dikpal, Ramesh L.; Renuka Prasad, T. J.; Satish, K.

    2017-12-01

    The quantitative analysis of drainage system is an important aspect of characterization of watersheds. Using watershed as a basin unit in morphometric analysis is the most logical choice because all hydrological and geomorphic processes occur within the watershed. The Budigere Amanikere watershed a tributary of Dakshina Pinakini River has been selected for case illustration. Geoinformatics module consisting of ArcGIS 10.3v and Cartosat-1 Digital Elevation Model (DEM) version 1 of resolution 1 arc Sec ( 32 m) data obtained from Bhuvan is effectively used. Sheet and gully erosion are identified in parts of the study area. Slope in the watershed indicating moderate to least runoff and negligible soil loss condition. Third and fourth-order sub-watershed analysis is carried out. Mean bifurcation ratio ( R b) 3.6 specify there is no dominant influence of geology and structures, low drainage density ( D d) 1.12 and low stream frequency ( F s) 1.17 implies highly infiltration subsoil material and low runoff, infiltration number ( I f)1.3 implies higher infiltration capacity, coarse drainage texture ( T) 3.40 shows high permeable subsoil, length of overland flow ( L g) 0.45 indicates under very less structural disturbances, less runoff conditions, constant of channel maintenance ( C) 0.9 indicates higher permeability of subsoil, elongation ratio ( R e) 0.58, circularity ratio ( R c) 0.75 and form factor ( R f) 0.26 signifies sub-circular to more elongated basin with high infiltration with low runoff. It was observed from the hypsometric curves and hypsometric integral values of the watershed along with their sub basins that the drainage system is attaining a mature stage of geomorphic development. Additionally, Hypsometric curve and hypsometric integral value proves that the infiltration capacity is high as well as runoff is low in the watershed. Thus, these mormometric analyses can be used as an estimator of erosion status of watersheds leading to prioritization for taking

  14. Detection of seasonal cycles of erosion processes in a black marl gully from a time series of high-resolution digital elevation models (DEMs

    Directory of Open Access Journals (Sweden)

    J. Bechet

    2016-10-01

    Full Text Available The Roubine catchment located in the experimental research station of Draix-Bléone (south French Alps is situated in Callovo-Oxfordian black marls, a lithology particularly prone to erosion and weathering processes. For 30 years, this small watershed (0.13 ha has been monitored for analysing hillslope processes on the scale of elementary gullies. Since 2007, surface changes have been monitored by comparing high-resolution digital elevation models (HRDEMs produced from terrestrial laser scanner (TLS. The objectives are (1 to detect and (2 to quantify the sediment production and the evolution of the gully morphology in terms of sediment availability/transport capacity vs. rainfall and runoff generation. Time series of TLS observations have been acquired periodically based on the seasonal runoff activity with a very high point cloud density ensuring a resolution of the digital elevation model (DEM on the centimetre scale. The topographic changes over a time span of 2 years are analysed. Quantitative analyses of the seasonal erosion activity and of the sediment fluxes show and confirm that during winter, loose regolith is created by mechanical weathering, and it is eroded and accumulates in the rills and gullies. Because of limited rainfall intensity in spring, part of the material is transported in the main gullies, which are assumed to be a transport-limited erosion system. In the late spring and summer the rainfall intensities increase, allowing the regolith, weathered and accumulated in the gullies and rills during the earlier seasons, to be washed out. Later in the year the catchment acts as a sediment-limited system because no more loose regolith is available. One interesting result is the fact that in the gullies the erosion–deposition processes are more active around the slope angle value of 35°, which probably indicates a behaviour close to dry granular material. It is also observed that there exist thresholds for the rainfall

  15. Fibrilação atrial e demência: resultados do São Paulo ageing & health study Atrial fibrillation and dementia: results from the Sao Paulo ageing & health study

    Directory of Open Access Journals (Sweden)

    Liz Andrea Kawabata-Yoshihara

    2012-12-01

    Full Text Available FUNDAMENTO: A fibrilação atrial é um fator de risco controverso para demência. OBJETIVO: O objetivo deste estudo é avaliar a associação entre fibrilação atrial e demência em participantes do São Paulo Ageing & Health. MÉTODOS: O São Paulo Ageing & Health é um estudo transversal, de base populacional, de idosos residentes em um uma região de baixa renda da cidade de São Paulo, Brasil. Diagnóstico de demência foi realizado de acordo com o protocolo do grupo 10/66, com base em critérios do Manual de Diagnóstico e Estatística das Perturbações Mentais (DSM-IV. O diagnóstico de fibrilação atrial foi feito por eletrocardiograma de 12 derivações, avaliado por dois cardiologistas. Dados demográficos e de fatores de risco cardiovasculares também foram obtidos. RESULTADOS: A demência foi diagnosticada em 66 (4,3% e fibrilação atrial em 36 (2,4% de 1.524 participantes com um eletrocardiograma válido. A razão de chances bruta para demência em participantes com fibrilação atrial foi 2,8 (intervalo de confiança [IC] 95%: 1,0-8,1; p = 0,06 em comparação com indivíduos sem fibrilação atrial. Relação positiva foi encontrada em mulheres (RC 4,2; IC 95%: 1,2-15,1; p = 0,03. Após ajuste para idade, no entanto, essa associação tornou-se não significativa (RC 2,2, IC 95%: 0,6-8,9; p = 0,26. CONCLUSÃO: Não houve associação independente entre a fibrilação atrial e demência nessa amostra. A prevalência da fibrilação atrial pode ser baixa nesta população em virtude da mortalidade cardiovascular prematura.BACKGROUND: Atrial fibrillation (AF is a controversial risk factor for dementia. OBJECTIVE: The objective of this study was to assess the association between AF and dementia in the "Sao Paulo Ageing & Health" (SPAH study participants. METHODS: SPAH is a cross-sectional, population-based study of elderly people living in a deprived neighborhood in Sao Paulo, Brazil. Dementia diagnosis was performed according to

  16. Demência fronto-temporal: aspectos clínicos e terapêuticos Demencia frontotemporal: aspectos clínicos y terapéuticos Frontotemporal dementia: clinical and therapeutic features

    Directory of Open Access Journals (Sweden)

    Antônio Lúcio Teixeira-Jr

    2006-04-01

    Full Text Available A demência fronto-temporal é uma importante causa de demência no período pré-senil. Caracteriza-se por significativas modificações do comportamento e da personalidade, enquanto o funcionamento cognitivo avaliado por testes psicométricos tradicionais encontra-se relativamente preservado. Muitos pacientes buscam o psiquiatra em virtude dos sintomas comportamentais proeminentes, como apatia, desinibição e comportamentos perseverativos ou estereotipados. O tratamento racional da demência fronto-temporal é atualmente limitado. Os sintomas comportamentais são controlados principalmente por inibidores seletivos da recaptação de serotonina.La demencia frontotemporal es una importante causa de demencia en el período presenil de la vida. Se caracteriza por alteraciones significativas en el comportamiento y en la personalidad, mientras la función cognitiva evaluada por pruebas psicométricas convencionales resulta relativamente preservada. Muchos pacientes recurren al psiquiatra en función de síntomas comportamentales sobresalientes como apatía, desinhibición y comportamientos perseverantes o estereotipados. El tratamiento racional de la demencia frontotemporal aún se encuentra bastante limitado. Los síntomas comportamentales se controlan principalmente con inhibidores selectivos de la recaptación de serotonina.Frontotemporal dementia is a major cause of dementia in the presenium. It is characterized by significant changes in behavior and personality, while cognitive functioning as assessed by traditional psychometric tests is relatively preserved. Thus, many patients present to the psychiatrist because of the prominence of behavioral symptoms, such as apathy, disinhibition, perseverative or stereotyped behaviors. Rational treatment for frontotemporal dementia is currently limited. The behavioral symptoms are controlled mainly with selective serotonin reuptake inhibitors.

  17. The legal compatibility of the German Act for mandatory use of electricity from renewables (Stromeinspeisungsgesetz) with the Treaty of Rome; Die Vereinbarkeit des Stromeinspeisungsgesetzes mit dem EG-Vertrag

    Energy Technology Data Exchange (ETDEWEB)

    Iro, S.P.

    1998-04-01

    In force since 1990, the German Stromeinspeisungsgesetz (obliging electric utilities to purchase at mandatory prices electricity from renewable energy sources) still is an issue of debates about legal justification under German law and compatibility with legislation on the European Internal Market for elctricity. The contribution analyses the points of friction with the Treaty of Rome, in particular the European regulations governing subsidization of national industries or undertakings by their government, aspects of freedom of trade within the EU and restrictive trade practices law. The conclusion of the legal analysis is that the German act is compatible with the subsidy regulations of the EU, but calls for amendment to correct infringements of the principles of free trade and competition within the EU in the provisions excluding electricity from renewables generated in other EU Member States. (CB) [Deutsch] Es ist schon seit 1990 in Kraft, und das Stromeinspeisungsgesetz bietet nach wie vor Anlass zu Diskussionen, sowohl aus dem Blickwinkel des deutschen Rechts wie auch vom Standpunkt des EGV. Der Beitrag konzentriert sich auf die rechtlichen Reibungspunkte mit europaeischem Recht, konkret die Regelungen ueber erlaubte staatliche Beihilfen an nationale Unternehmen, deren Abgrenzung zu allgemein wirtschaftspolitischen Massnahmen eines Staates und Aspekte der Warenverkehrsfreiheit und des Wettbewerbs auf dem europaeischen Binnenmarkt. Das Ergebnis der rechtlichen Analyse des Beitrags sieht in der Subventionierung der Stromerzeugung aus erneuerbaren Energien eine politische Entscheidung, die mit EG-Interessen und EG-Recht vereinbar ist. Das Gesetz verstosse jedoch gegen die Warenverkehrsfreieheit auf dem Binnenmarkt in den Regelungen, wo es entsprechend erzeugten Strom aus anderen Mitgliedslaendern von der Subventionierung ausnimmt. (orig./CB)

  18. Redução da agitação nas pessoas idosas com demência durante os cuidados de higiene: Contributo da Metodologia de Cuidar Humanitude

    Directory of Open Access Journals (Sweden)

    Rosa Cândida Melo

    2017-07-01

    Conclusões: Os estudos evidenciaram que com a implementação da Metodologia de Cuidar Humanitude® há uma redução dos comportamentos de agitação nas pessoas com demência, durante os cuidados de higiene, devido à intencionalidade na relação e a uma maior compreensão da pessoa cuidada, levando a uma maior aceitação e participação nos cuidados.

  19. Kardiovaskuläres Risikofaktorenprofil und Herzinfarktrisiko nach dem PROCAM-Index bei Männern mittleren Alters unter besonderer Berücksichtigung der EKG-Veränderungen unter Belastungsbedingungen

    OpenAIRE

    Kirchhof, M.R. (Monika)

    2006-01-01

    An 1248 Soldaten, wurde das kardiovaskuläre Risikofaktorenprofil bestimmt und das Herzinfarktrisiko nach dem PROCAM-Index ermittelt. Häufigkeit der Risikofaktoren: BMI?25kg/m2: 68,8%, positive Familienanamnese für Herzinfarkt 13,4%, Zigarettenrauchen 17,9%, körperliche Inaktivität 4,9%, systolischer RR?140mmHg: 50,9%, diastolischer RR?90mmHg: 41,4%, Gesamtcholesterin?5,2 mmol/l: 59,7%, HDL-Cholesterin?1,2 mmol/l: 33,5%, Gesamtcholesterin/HDL-Cholesterin-Quotient?4: 52,3%, LDL-Cholesterin ?4,...

  20. "Acidentes domésticos em idosos com diagnóstico de demência atendidos em um ambulatório de Ribeirão Preto, SP"

    OpenAIRE

    Celmira Lange

    2005-01-01

    O estudo teve por objetivo descrever os acidentes domésticos ocorridos com idosos portadores do diagnóstico de demência, relacionando estes às suas condições de vida. Trata-se de um estudo descritivo e seccional, realizado no período de 2001 a 2002. Participaram do estudo 110 idosos demenciados, residentes na zona urbana de Ribeirão Preto, SP, atendidos em um ambulatório terciário de um hospital público. Os dados foram coletados no domicílio por meio de entrevistas, previamente agendadas, com...

  1. Prevention, screening and therapy of thyroid diseases and their cost-effectiveness; Praevention, Screening und Therapie gutartiger Schilddruesenerkrankungen unter dem Aspekt von Kosten und Nutzen

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Moka, D.; Schmidt, M.; Theissen, P.; Schicha, H. [Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2003-10-01

    60%. (orig.) [German] Kosten/Nutzenanalysen in Bezug auf gutartige Schilddruesenerkrankungen sind in der Literatur unterrepraesentiert. Insbesondere die Erhebung eines Geldwertes pro gewonnenem Lebensjahr gestaltet sich methodisch schwierig: Der Nutzen praeventiver Massnahmen ist weit in die Zukunft verlagert. Der Einfluss einer unbehandelten Schilddruesenerkrankung auf die Lebenszeit wird ebenfalls erst durch einen langfristigen Horizont und dann eher epidemiologisch als individuell zu erfassen sein. Als Prophylaxe (primaere Praevention) sind Programme zum Ausgleich des Iodmangels sowie die Aufklaerung ueber den negativen Einfluss des Rauchens auf die Entwicklung einer Struma oder eines M. Basedows aus entscheidungstheoretischer Sicht sehr kosteneffektiv. Screening-Programme (sekundaere Praevention) werden fuer die Parameter TSH, Calcium und Calcitonin diskutiert. Eine besonders guenstige Kosten-Effektivitaet des TSH-Screenings ist in besonderen Lebensphasen (Neugeborene, Schwangerschaft, postpartal, hoeheres Alter, stationaerer Patient mit akuter Erkrankung) und bei definierten Vorbefunden (TSH>2mU/l, TPO-Antikoerper) aus klinisch-epidemiologischer Sicht zu erwarten, ohne dass hierzu gesonderte gesundheitsoekonomische Berechnungen vorgelegt wurden. Andererseits konnte die Kosten-Effektivitaet eines generellen TSH-Screening ab dem 35. Lebensjahr in einer qualitativ hochwertigen gesundheitsoekonomischen Studie bereits belegt werden. Die Therapiestrategien bei gutartigen Schilddruesenerkrankungen (tertiaere Praevention) zielen auf eine Minimierung sekundaerer Krankheitsfolgen (Vorhofflimmern, Myokardinfarkt, Herztod) und iatrogener Nebenwirkungen. Beispiele fuer eine solche tertiaere Praevention sind die definitive Therapie (Radioiodtherapie) der Immunhyperthyreose M. Basedow bei unguenstigen initialen Praedikatoren fuer eine Rezidivhyperthyreose, die Radioiodtherapie der latenten Hyperthyreose sowie die Radioiodtherapie der grossvolumigen Struma bei aelteren oder

  2. Mapeo de lineamientos a partir de un DEM (SRTM3: desarrollo y aplicaciones para el estudio de un área de los Andes Patagónicos Septentrionales

    Directory of Open Access Journals (Sweden)

    Ernesto Gallegos

    2008-12-01

    Full Text Available Este trabajo explora la utilidad del mapeo de lineamientos sobre mapas de relieve sombreado producidos con software para análisis de imágenes satelitales a partir de modelos de elevación digital (DEM de 3 segundos de resolución espacial. La zona de estudio se ubica entre 39°S y 39°30'S y entre 71°W y 71°30'W y se utilizaron tres mapas de relieve sombreado con luz incidente a 45º de la horizontal y azimuts de 120º, 240° y 360°. Tres operadores mapearon lineamientos de manera independiente en las diferentes imágenes con el resultado de nueve mapas independientes. Sólo los lineamientos mapeados en al menos 2 mapas de relieve sombreado por al menos dos operadores o por los tres operadores en al menos una de las imágenes fue considerado un lineamiento reproducible, de esta manera se obtuvieron 23 lineamientos. Las tendencias obtenidas son 55°, 106°, 140°, y 153°. Estos lineamientos fueron contrastados con lineamientos mapeados en una imagen GeoCoverT (Mosaico Ortorrectificado Comprimido de imágenes Landsat Enhanced Thematic Mapper, en la hoja geológica 1:200.000 (SEGEMAR y en mapas topográficos 1:50.000 (IGM. Algunos lineamientos claramente identificables a partir del DEM no se distinguieron en los mapas geológicos o topográficos ni en la imagen Landsat. Los autores consideran que existen ciertas ventajas del uso de modelos de elevación digital para el mapeo de lineamientos regionales: 1 Los usuarios pueden controlar el ángulo de incidencia de la luz y su azimut; 2 La escala de trabajo puede ser cambiada todas las veces que sea necesario; 3 A diferencia de las fotografías aéreas, los datos satelitales no tiene ningún tipo de deformación y no muestra influencia de rasgos antropogénicos o interferencia de la vegetación en la interpretación. Otra importante ventaja del DEM SRTM3 V2 y la imagen GeoCoverT usada en este caso es que se trata de datos de acceso gratuito y que cubren casi la totalidad de la Tierra. La

  3. Study on seismic stability of seawall in man-made island. Pt. 4. Deformation analysis of seawall during earthquake by DEM-FEM coupled analysis method (SEAWALL-2D)

    International Nuclear Information System (INIS)

    Kanatani, Mamoru; Tochigi, Hitoshi; Kawai, Tadashi

    1999-01-01

    In the development of the man-made island siting technology of nuclear power plants, assessing the stability of the seawall against large ocean waves and earthquakes is indispensable. Concerning with the seismic stability of the seawall, prediction of the deformation like sliding and settlement of the seawall during earthquake including the armour units in front of the caisson becomes important factor. For this purpose, the authors have developed the two-dimensional DEM-FEM coupled analysis method (SEAWALL-2D) to predict the deformation of the seawall covered with the armour units during earthquake. In this method, movements of the armour units are calculated in DEM analysis part and deformation of the caisson, rubble moundsand seabed and back fill are calculated in FEM analysis part taking the nonlinearity of the soil materials based on the effective stress into account. Numerical simulations of dynamic centrifuge model tests of the seawall are conducted to verify the applicability of this method. Results of the simulation analyses have successfully reproduced the movements of the armour units and the residual deformation of the caisson, sand seabed and back fill compared with the test results. (author)

  4. Alterações de linguagem em pacientes idosos portadores de demência avaliados com a Bateria MAC Language alterations in elderly patients with dementia assessed with the MAC Battery

    Directory of Open Access Journals (Sweden)

    Cristine Koehler

    2012-03-01

    Full Text Available OBJETIVO: Identificar as alterações de linguagem em um grupo de pacientes idosos portadores de demência nas tarefas de evocação lexical livre, com critério ortográfico e com critério semântico, interpretação de metáforas e discurso narrativo da Bateria Montreal de Avaliação da Comunicação - Bateria MAC, bem como, verificar a frequência de déficits. MÉTODOS: Participaram do estudo 13 pacientes com demência de grau leve a moderada, atendidos no Setor de Neurologia do Ambulatório de Distúrbios do Movimento e Demências do Hospital Santa Clara da Irmandade Santa Casa de Misericórdia de Porto Alegre (ISCMPA. O instrumento neuropsicológico de avaliação foi a Bateria MAC e a aplicação das tarefas seguiu a seguinte ordem: evocação lexical livre, evocação lexical com critério ortográfico, evocação lexical com critério semântico, interpretação de metáforas e discurso narrativo. RESULTADOS: O grupo de pacientes com demência apresentou desempenho deficitário em todas as tarefas da Bateria MAC que foram avaliadas, com diferença significativa. Além disso, os participantes apresentaram maior frequência de déficits, em ordem decrescente, nas tarefas de reconto parcial do discurso narrativo (informações essenciais e presentes, seguidas pelas tarefas de evocação lexical com critério ortográfico e com critério semântico, e reconto integral do discurso narrativo. Pelo menos dois pacientes apresentaram alterações de desempenho em alguma das cinco tarefas realizadas da Bateria MAC. CONCLUSÃO: A avaliação de linguagem através da Bateria MAC permitiu a verificação de alterações do processamento linguístico em idosos com demência, o que caracteriza que tal instrumento também é aplicável para esta população clínica.PURPOSE: To identify language deficits in a group of elderly patients with dementia in tasks of free lexical retrieval, lexical retrieval with orthographic and semantic criteria

  5. Combined instruments for the screening of dementia in older people with low Education Instrumentos combinados para o rastreio de demência em idosos com baixo nível educacional

    Directory of Open Access Journals (Sweden)

    Cássio M.C. Bottino

    2009-06-01

    Full Text Available OBJECTIVE: To determine which combination of cognitive tests and informant reports can improve the diagnostic accuracy of dementia screening in low educated older people. METHOD: Patients with mild to moderate dementia (n=34 according to ICD-10 and DSM-III-R criteria and 59 older controls were assessed with the Mini-Mental State Examination (MMSE and the Fuld Object Memory Evaluation (FOME. Informants were assessed using the Informant Questionnaire on Cognitive Decline in the Elderly and the Bayer-Activities of Daily Living Scale. RESULTS: The 4 instruments combined with the mixed rule correctly classified 100% and the logistic regression (weighted sum classified 95.7% of subjects. The weighted sum had a significantly larger ROC area compared to MMSE (p=0.008 and FOME (p=0.023. The specificity of the tested combinations was superior to the MMSE alone (p=0.002. CONCLUSIONS: Cognitive tests combined with informant reports can improve the screening of mild to moderate dementia in low educated older people.OBJETIVO: Determinar qual combinação de testes cognitivos e avaliações do informante pode melhorar o rastreio de demência em idosos com baixo nível educacional. MÉTODO: Pacientes com demência leve a moderada (n=34 de acordo com critérios da CID-10 e DSM-III-R, e 59 controles idosos foram avaliados com o Mini-Exame do Estado Mental (MEEM e com o "Fuld Object Memory Evaluation" (FOME. Informantes foram avaliados com o "Informant Questionnaire on Cognitive Decline in the Elderly" e a escala Bayer-Atividades da Vida Diária. RESULTADOS: Os quatro instrumentos combinados com a regra mista classificaram 100% e a regressão logística (soma ponderada classificou 95,7% dos sujeitos. A soma ponderada teve uma área da curva ROC significativamente maior comparada ao MEEM (p=0,008 e FOME (p=0,023. A especificidade das combinações testadas foi superior ao MEEM isolado (p=0,002. CONCLUSÕES: Testes cognitivos combinados com relatos dos informantes

  6. A new subsidy regulation for coal after 2002 on the basis of the EC treaty; Eine neue Beihilferegelung fuer die Steinkohle nach dem Jahr 2002 auf der Basis des EG-Vertrags

    Energy Technology Data Exchange (ETDEWEB)

    Reichel, W. [Gesamtverband des Deutschen Steinkohlenbergbaus, Essen (Germany)

    2000-08-10

    Coal is and will remain the most important indigenous energy resource in Europe. Hence, an appropriate ECSC regulation must be drawn up for coal subsidies in the EC Treaty after 2002 to enable a core mining industry based on the long-term safeguarding of supply. This is primarily not a legal, but a political question. Neither Kyoto nor the expansion of natural gas or image problems militate against coal. Its future contribution to the energy mix requires above all advances in technology. (orig.) [German] Die Kohle ist und bleibt die wichtigste heimische Energieressource Europas. Fuer die Kohlenbeihilfen muss daher ab dem Jahr 2002 eine adaequate EGKS-Nachfolgeregelung im Rahmen des EG-Vertrags getroffen werden, um einen mit der langfristigen Versorgungssicherung begruendeten Kernbergbau zu ermoeglichen. Dies ist primaer keine rechtliche, sondern eine politische Frage. Weder Kyoto noch die Erdgasexpansion oder Imageprobleme sprechen grundsaetzlich gegen die Kohle. Ihr zukuenftiger Beitrag zum Energiemix erfordert vor allem eine Technikoffensive. (orig.)

  7. Passive houses: houses without heatings. Experience with the first demonstration building at Darmstadt, and prospects for low-cost passive houses; Passivhaeuser: Gebaeude ohne Heizung. Erfahrungen mit dem ersten Demonstrationsgebaeude in Darmstadt und Perspektiven fuer kostenguenstige Passivhaeuser

    Energy Technology Data Exchange (ETDEWEB)

    Feist, W. [Inst. Wohnen und Umwelt, Darmstadt (Germany)

    1998-12-31

    `Passive` houses, i.e. houses without active heating, are extremely energy-optimized houses: thanks to their efficient thermal protection, their heat demand falls below the threshold requiring a separate space heat distribution system (15 kWh/(m{sup 2}a)). Passive houses will account for an increasing proportion of new buildings already during the next years. Houses with zero thermal energy demand involve notably higher construction effort but do not contribute essentially more to the mitigation of environmental pollution. (orig.) [Deutsch] Das Passivhaus ist ein extremes Niedrigenergiehaus, bei welchem durch guten Waermeschutz gerade die Schwelle unterschritten wird, bei der kein separates Heizwaermeverteilsystem mehr benoetigt wird (15 kWh/(m{sup 2}a)). Passivhaeuser werden schon in den naechsten Jahren einen zunehmenden Anteil an den Neubauten haben. Nullheizenergiehaeuser fuehren gegenueber dem Passivhaus zu spuerbar hoeherem baulichen Aufwand, ohne die Umwelt bedeutend mehr zu entlasten. (orig.)

  8. La reactivación de la doctrina Monroe: las agendas para la América Andina y el Caribe en la transición republicano-demócrata

    Directory of Open Access Journals (Sweden)

    Catalina Toro Pérez

    2011-01-01

    Full Text Available ¿Podemos pensar acaso en una agenda norteamericana alternativa hacia la América Andina y el Caribe en el contexto de la transición del gobierno republicano-demócrata en los Estados Unidos? Partimos de considerar que el proyecto de hegemonía militar, económica y comercial estadounidense en América Latina no está siendo cuestionado. Si bien existen nuevas e importantes transformaciones en las agendas domesticas internas que se expresan en los reclamos de los sectores sociales en los Estados Unidos por el desarrollo de una nueva agenda económica y social, y la necesidad de una transformación profunda en las relaciones internacionales, la política exterior hacia Latinoamérica continua orientándose a partir de las agendas de seguridad hemisférica y libre comercio. En este artículo mostraremos cómo estos dos grandes componentes de la política exterior se conjugan a lo largo de los gobiernos republicanos y demócratas desde los años cincuentas hasta hoy. Señalaremos como las principales fuerzas políticas en el contexto de la confrontación electoral por la presidencia de los Estados Unidos (2008 contribuyeron a legitimar estas agendas, para la América Andina y el Caribe, fortaleciendo sus vínculos con Colombia y México, principalmente, como estrategia de contención de la avanzada de los denominados gobiernos progresistas.

  9. The greek version of the demotic legend of the Eye of the Sun | La versión griega de la leyenda demótica del Ojo del Sol

    Directory of Open Access Journals (Sweden)

    María Paz López Martínez

    2005-12-01

    Full Text Available This article is a preliminary study of a 3rd century papyrus known as the "Legend of Tefnut". It is a translation into Greek of an Egyptian legend, which relates the myth of the Eye of the Sun. Although the text is the only known instance of both an original Demotic story and its Greek translation, it has not - so far - received the attention it deserves. The Demotic text has been preserved in a number of versions, the most complete of which is to be found in Leyden Museum. It relates the story of Tefnut's journey from Egypt to Ethiopia, fleeing from her father. The God Thoth is sent to persuade her to return and on the way back he tells her a number of stories to entertain her and convince her of the virtues of her homeland. | Este artículo es el estudio previo de un papiro del siglo III d.C. conocido como "Leyenda de Tefnut". Se trata de la traducción al griego de una leyenda egipcia que narra el mito del Ojo del Sol. Aunque hasta ahora ha recibido poca atención, se trata de un fragmento importante porque es el único caso en el que contamos con la traducción al griego y con el propio texto demótico original. La leyenda demótica se ha conservado en varias versiones, la más importante de las cuales se encuentra en el Museo de Leiden. Narra la huida de la diosa Tefnut desde Egipto hasta Etiopía como consecuencia de una riña con su padre. El padre encarga al dios Tot la difícil misión de hacer volver a su hija. Durante el viaje de vuelta Tot intenta distraer a Tefnut contándole historias que la diviertan y ensalzando las virtudes de su patria.

  10. Demência na doença de Parkinson: avaliação crítica da literatura Dementia in Parkinson's disease: a critical review of literature

    Directory of Open Access Journals (Sweden)

    Luciana de Abreu e Lima Pamplona

    1996-12-01

    Full Text Available Nos últimos trinta anos, avançou-se muito nos conhecimentos sobre a doença de Parkinson. A maioria dos pacientes consegue ter uma vida com qualidade por maior período de tempo com a moderna terapêutica oferecida. No entanto, a demência que pode ocorrer no processo evolutivo ainda não tem os aspectos neuropatológicos totalmente definidos. Sabemos que há alterações nos núcleos da base, na área ventral do tegmento mesencefálico, no tálamo, na substância negra e no córtex frontal. A presença dos corpúsculos de Lewy corticais tem sido associada à demência, da mesma forma que as alterações neuropatológicas da doença de Alzheimer, em alguns casos. O mais provável é que sua base seja multifatorial. Neurotransmissores diferentes, como a serotonina, a acetilcolina e a dopamina ou, ainda, hormônios como o cortisol, estão alterados quantitativamente em grande número de parkinsonianos demenciados. Encontrada em até 40% dos pacientes, a depressão do parkinsoniano já foi relacionada como fator predisponente à demência, presente em aproximadamente 25% destes. Pesquisas nessa área continuam conflitantes, afirmando, alguns, que há relação entre depressão, atrofia cortical, hipercortisolemia e doença de Parkinson. Os estudos neuropsicológicos indicam que a demência na doença de Parkinson é do tipo subcortical ou fronto-límbica. Sabe-se, também, que parkinsonianos sem distúrbios cognitivos clinicamente expressivos apresentam deficiências quando submetidos a testagens neuropsicológicas mais rígidas. Admite-se que os distúrbios cognitivos fazem parte do quadro clínico dessa doença, variando sua expressão entre os pacientes. Para o diagnóstico da demência, recomendam-se os critérios estabelecidos pela Associação Americana de Psiquiatria, publicados no seu manual de estatística e doenças mentais, assim como os métodos de neuroimagem. No que se refere ao tratamento, o quadro demencial parkinsoniano, até o

  11. Método de Montessori aplicado à demência: revisão da literatura Método Montessori aplicado a la demencia: revisión de la literatura Montessori Method applied to dementia: literature review

    Directory of Open Access Journals (Sweden)

    Daniela Filipa Soares Brandão

    2012-06-01

    Full Text Available O método de Montessori foi aplicado inicialmente às crianças, mas atualmente aplica-se a pessoas com demência. O objetivo deste trabalho é fazer uma revisão sistemática da investigação sobre a eficácia desse método, utilizando a Medical Literature Analysis and Retrieval System Online (Medline com as palavras-chave demência e método de Montessori. Foram selecionados 10 estudos, onde se verificam melhorias significativas na participação e no envolvimento construtivo e diminuição dos afectos negativos e do envolvimento passivo. Não obstante, as revisões da literatura acerca desta intervenção não farmacológica em demência classificam esse método como fraco, em termos de eficácia. Essa aparente discrepância pode explicar-se porque o método de Montessori pode ter, de fato, uma influência pouco significativa em dimensões como a dos problemas comportamentais ou porque não existe investigação acerca desse método com elevados níveis de controle como são a presença de vários grupos de controle ou o duplo-cego.El método Montessori se aplicó inicialmente a los niños, pero ahora se aplica a las personas con demencia. El propósito de este estudio es revisar de forma sistemática la investigación sobre la eficacia de este método, utilizando Medical Literature Analysis and Retrieval System Online (Medline con las palabras clave demencia y método Montessori. Se seleccionaron 10 estudios, que tienen mejoras significativas en la participación y en el compromiso constructivo, y la reducción de efectos negativos y de la participación pasiva. Sin embargo, la revisión de la literatura sobre esta intervención no farmacológica en la demencia clasifica este método como débil en términos de eficacia. Esta aparente discrepancia puede explicarse porque el método Montessori puede tener una influencia poco significativa en los problemas de conducta, o porque no hay investigación sobre este método con altos niveles de

  12. Neuropsychological tests and driving in dementia: a review of the recent literature Testes neuropsicológicos e direção na demência: uma revisão da literatura recente

    Directory of Open Access Journals (Sweden)

    Marcia Thereza Silva

    2009-01-01

    Full Text Available INTRODUCTION: Neuropsychological tests measure several aspects of cognition and are useful to evaluate elderly drivers with cognitive impairment. However, there is no consensus on a standard battery of tests that could accurately predict safe driving. OBJECTIVE: The aim of this study is to review specific neuropsychological measures that may be useful to predict driving competence of demented individuals. METHOD: To address neuropsychologicaltests used for dementia and the ability to drive, the authors searched for the keywords dementia, Alzheimer's, drive, driver, drivers, driving, tests, neuropsychological, and assessment, in Medline, PubMed, ISI and SciELO databases seeking articles from 2000 to 2008. RESUTLS: From 131 articles, 27 met the inclusion criteria. Porteus Maze, Clock drawing, Trail B, UFOV and NAB Tests were found to be the most relevant neuropsychological measures for the evaluation of fitness to drive. CONCLUSION: Porteus Maze, Clock Drawing, Trail B, UFOV and NAB tests highlight visuospatial attention demands and/ or executive function. Those and other visuospatial and executive measures may be useful to predict driving competence of demented individuals.INTRODUÇÃO: Testes neuropsicológicos aferem diversos aspectos de cognição e são úteis para avaliar motoristas idosos que apresentam déficits cognitivos. Entretanto, ainda não existe consenso sobre uma bateria de testes capaz de apurar com eficiência os riscos de dirigir. Objetivo. O objetivo deste estudo foi revisar medidas neuropsicológicas específicas, capazes de prognosticar competência para dirigir em indivíduos com demência. MÉTODOS: Para identificar testes neuropsicológicos que predizem habilidade para dirigir, os autores intersectaram as palavras-chave: demência, Alzheimer, dirigir, condutor, condutores, direção, testes, neuropsicológicos e avaliação nas bases Medline, Pubmed, ISI e Scielo, buscando artigos entre os anos 2000 e 2008. RESULTADOS

  13. Avaliação das atividades de vida diária de idosos com diferentes níveis de demência Evaluation of the activities of daily living of elderly people with different levels of dementia

    Directory of Open Access Journals (Sweden)

    TA Marra

    2007-08-01

    Full Text Available OBJETIVOS: Comparar o desempenho de idosos com diferentes níveis de gravidade de demência em questionários de atividades básicas de vida diária (ABVDs e atividades instrumentais de vida diária (AIVDs. Verificar se existe correlação entre os questionários de AIVDs aplicados. METODOLOGIA: Foram aleatorizados 90 idosos (75,46 ± 7,66 anos atendidos no Centro de Referência do Idoso-MG, com diagnóstico clínico de demência (DSM-IV/APA e classificados quanto ao nível de gravidade da demência (Clinical Dementia Rating. As ABVDs foram avaliadas pelo Índice de Katz, e as AIVDs, pelo Índice de Lawton-Brody e de Pfeffer. Os testes de Kruskal-Wallis e de Mann-Whitney foram utilizados para verificar o desempenho dos idosos nas ABVDs, e a correlação de Spearman, para investigar a relação entre os instrumentos de AIVDs (alfaOBJECTIVE: To compare the performance of elderly people with different levels of severity of dementia using questionnaires on basic activities of daily living (BADLs and instrumental activities of daily living (IADLs. Also, to verify whether there were any association between the IADL questionnaires applied. METHOD: Ninety elderly people, aged 75.46 ± 7.66 years with a clinical diagnosis of dementia (DSM-IV/APA who were seen at the Minas Gerais Reference Center for the Elderly, were randomized selected and classified according to the level of severity of their dementia (Clinical Dementia Rating. Their BADLs were assessed using the Katz Index and their IADLs by the Lawton-Brody and Pfeffer indexes. The Kruskal-Wallis and Mann-Whitney tests were used in order to investigate the elderly people's performance regarding BADLs, while the Spearman correlation was used to investigate the relationships among the IADL (alpha< 0.05. RESULTS: Statistically significant differences in performance were found between the elderly people with different levels of severity of dementia, as assessed by the BADL and IADL questionnaires (p< 0

  14. Impacto em cuidadores de idosos com demência atendidos em um serviço psicogeriátrico Impact on caregivers of elderly patients with dementia treated at a psychogeriatric service

    Directory of Open Access Journals (Sweden)

    Regiane Garrido

    2004-12-01

    Full Text Available OBJETIVO: O número de idosos com demência no Brasil está crescendo rapidamente, e há carência de dados empíricos sobre o impacto em cuidadores informais. O objetivo do estudo foi avaliar o impacto sobre cuidadores informais de pacientes com síndrome demencial. MÉTODOS: Estudo de corte transversal foi conduzido em um serviço psicogeriátrico da cidade de São Paulo, Brasil. Entrevistas estruturadas e semi-estruturadas foram aplicadas em 49 idosos com demência e em seus cuidadores informais. O impacto em cuidadores foi avaliado com a Zarit Burden Interview. RESULTADOS: Os pacientes eram em sua maioria do sexo feminino, apresentavam escore médio no mini exame do estado mental de 12,2 e alta freqüência de transtornos de comportamento. Os cuidadores eram predominantemente mulheres, filhas ou esposas, e co-residiam com seus pacientes. A média de impacto foi de 32,4 (dp: 16,7. As variáveis estatisticamente associadas a níveis de impacto foram o grau de parentesco do cuidador com o paciente (p=0,011, sintomas psiquiátricos do cuidador (pOBJECTIVE: There is an increasingly number of demented elderly in Brazil but empirical data on the resulting impact on their informal caregivers is still poorly documented. The purpose of this study was to evaluate the impact on informal caregivers of elderly with dementia. METHODS: A cross-sectional study was conducted at a psychogeriatric unit in the city of São Paulo, Brazil. Structured and semi-structured interviews were administered to 49 elderly patients with dementia and their caregivers. The impact on the caregiver was measured using the Zarit Burden Interview. RESULTS: Most patients were females, had an average score of 12.2 in the Mini Mental State Examination and high incidence of disruptive behavior. Caregivers were predominantly females, generally wives or daughters who lived with their patients. The mean impact score was 32.4 (SD 16.7. Variables statistically associated with the level of

  15. Percutaneous biopsy of non-palpable breast lesions with the advanced breast biopsy instrumentation (ABBI): analysis of indication strategies; Perkutane stereotaktische Biopsie nicht palpabler Mammalaesionen mit dem Advanced Breast Biopsy Instrumentation (ABBI) System: kritische Evaluation der Indikationsstellung

    Energy Technology Data Exchange (ETDEWEB)

    Wedegaertner, U.; Otto, U.; Buitrago-Tellez, C.; Bremerich, J.; Bongartz, G. [Basel Univ. (Switzerland). Inst. fuer Di