WorldWideScience

Sample records for scans occupational profile

  1. Graphic Communications. Occupational Competency Analysis Profile.

    Science.gov (United States)

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP), which is one of a series of OCAPs developed to identify the skills that Ohio employers deem necessary to entering a given occupation/occupational area, lists the occupational, academic, and employability skills required of individuals entering graphic communications occupations. The…

  2. Criminal Justice. Occupational Competency Analysis Profile.

    Science.gov (United States)

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Occupational Competency Analysis Profile (OCAP) contains a competency list verified by expert workers and developed through a modified DACUM (Developing a Curriculum) involving business, industry, labor, and community agency representatives from Ohio. This OCAP identifies the occupational, academic, and employability skills (competencies)…

  3. Simulation of annual electric lighting demand using various occupancy profiles

    DEFF Research Database (Denmark)

    Iversen, Anne; Andersen, Philip Hvidthøft Delff; Svendsen, Svend

    2013-01-01

    This paper describes an investigation of the effect on electric lighting demand of applying occupancy models of various resolution to climate-based daylight modelling. The lighting demand was evaluated for a building zone with the occupant always present, with occupancy corresponding to absence...... factors, based on an estimated annual mean occupancy, based on estimated 1-hour mean occupancy, and based on 2-min occupancy intervals. The results showed little difference in the annual electric lighting demand when the same occupancy profile was used every day, as opposed to when profiles were used...... where occupancy varied every day. Furthermore, the results showed that annual electric lighting demand was evaluated slightly conservatively when a mean absence factor was applied as opposed to using dynamic occupancy profiles....

  4. Vibrating wire for beam profile scanning

    Directory of Open Access Journals (Sweden)

    S. G. Arutunian

    1999-12-01

    Full Text Available A method that measures the transverse profile (emittance of the bunch by detecting radiation arising at the scattering of the bunch on scanning wire is widely used. In this work information about bunch scattering is obtained by measuring the oscillation frequency of the tightened scanning wire. In such a way, the system of radiation (or secondary particles extraction and measurement can be removed. The entire unit consists of a compact fork with tightened wire and a scanning system. Normal oscillation frequency of a wire depends on wire tension, its geometric parameters, and, in a second approximation, its elastic characteristics. Normal oscillations are generated by interaction of an alternating current through the wire with magnetic field of a permanent magnet. In this case, it is suggested that the magnetic field of the accelerator (field of dipole magnets or quadrupole magnets be used for excitation of oscillations. The dependence of oscillation frequency on beam scattering is determined by several factors, including changes of wire tension caused by transverse force of the beam and influence of beam self-field. Preliminary calculations show that the influence of wire heating will dominate. We have studied strain gauges on the basis of vibrating wire from various materials (tungsten, beryl bronze, and niobium zirconium alloys. A scheme of normal oscillation generation by alternating current in autogeneration circuit with automatic frequency adjustment was selected. A special method of wire fixation and elimination of transverse degrees of freedom allows us to achieve relative stability better than 10^{-5} during several days at a relative resolution of 10^{-6}. Experimental results and estimates of wire heating of existing scanners show that the wire heats up to a few hundred grades, which is enough for measurements. The usage of wire of micrometer thickness diminishes the problem of wire thermalization speed during the scanning of the bunch.

  5. Fast-scan, beam-profile monitor

    International Nuclear Information System (INIS)

    Waugh, A.F.

    1977-01-01

    A minimodular, data-acquisition system can be used to rapidly interrogate a 45-point matrix of beam-current sampling targets over the 3- x 12-in. rectangular, output beam cross section of a 50-A, neutral-beam ion source. This system, operating at a throughput rate of 12 μs per channel, can make several complete scans during the 10- to 25-ms-duration beam pulse. Data obtained are available in both analog and digital form. The analog signal is used to create an immediately interpretable CRT display of the beam-current density profile that shows how well the source is aimed. The digital data are held in buffer memory until transfer to a minicomputer for software processing and plotting

  6. Occupational Heat Stress Profiles in Selected Workplaces in India

    OpenAIRE

    Venugopal, Vidhya; Chinnadurai, Jeremiah S.; Lucas, Rebekah A. I.; Kjellstrom, Tord

    2016-01-01

    Health and productivity impacts from occupational heat stress have significant ramifications for the large workforce of India. This study profiled occupational heat stress impacts on the health and productivity of workers in select organized and unorganized Indian work sectors. During hotter and cooler seasons, Wet Bulb Globe Temperatures (WBGT) were used to quantify the risk of heat stress, according to International workplace guidelines. Questionnaires assessed workers' perceived health and...

  7. Profile of the Brazilian Researcher in Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Any Carolina Cardoso Guimarães Vasconcelos

    2014-09-01

    Full Text Available The purpose of the present study was to analyze the profile of Brazilian PhD researchers in occupational therapy based on data obtained from the National Council for Scientific and Technological Development - CNPq. Two hundred forty curricula of occupational therapists were individually analyzed, 102 of them from PhD researchers. The curricula were analyzed with respect to gender; completion time of undergraduate studies; institution; time spent for obtaining the doctorate; professional activities; geographical distribution, scientific, and editorial composition; and guidance of undergraduate research, specialization, and master, doctorate and post-doctorate courses. The data showed that 94% of the researchers were women. With regard to professional practice, 73% of the doctors were affiliated to public universities and 84% were located in the southeast region. A total of 1361 papers were produced, at an average of 13.3 articles per researcher, with 25% on the theme of functional health (cognitive, neuromotor, musculoskeletal occupational performance and assistive technology. The PhD researchers in occupational therapy also published 90 books and 488 book chapters. Additionally, 59% of the researchers collaborated as reviewers for scientific periodicals. The results of the analysis will allow the academic community to gain a perspective of the occupational therapy scenario in Brazil, assisting in the establishment of future priorities for improving knowledge and professional practice.

  8. Vertical Soil Profiling Using a Galvanic Contact Resistivity Scanning Approach

    Directory of Open Access Journals (Sweden)

    Luan Pan

    2014-07-01

    Full Text Available Proximal sensing of soil electromagnetic properties is widely used to map spatial land heterogeneity. The mapping instruments use galvanic contact, capacitive coupling or electromagnetic induction. Regardless of the type of instrument, the geometrical configuration between signal transmitting and receiving elements typically defines the shape of the depth response function. To assess vertical soil profiles, many modern instruments use multiple transmitter-receiver pairs. Alternatively, vertical electrical sounding can be used to measure changes in apparent soil electrical conductivity with depth at a specific location. This paper examines the possibility for the assessment of soil profiles using a dynamic surface galvanic contact resistivity scanning approach, with transmitting and receiving electrodes configured in an equatorial dipole-dipole array. An automated scanner system was developed and tested in agricultural fields with different soil profiles. While operating in the field, the distance between current injecting and measuring pairs of rolling electrodes was varied continuously from 40 to 190 cm. The preliminary evaluation included a comparison of scan results from 20 locations to shallow (less than 1.2 m deep soil profiles and to a two-layer soil profile model defined using an electromagnetic induction instrument.

  9. Dose profile study in head CT scans using radiochromic films

    Energy Technology Data Exchange (ETDEWEB)

    Ladino G, A. M.; Prata M, A., E-mail: amlgphys@gmail.com [Universidade Federal de Minas Gerais, Departamento de Engenharia Nuclear, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2016-10-15

    Diagnostic images of computed tomography generate higher doses than other methods of diagnostic radiology using X-ray beam attenuation. Clinical applications of CT have been increased by technological advances, what leads to a wide variety of scanner in the Brazilian technological pool. It has been difficult to implement dose reduction strategies because of the lack of proper guidance on computed tomography examinations. However, CT scanners allow adjusting acquisition parameter according to the patients physical profile and diagnostic application for which the scan is intended. The knowledge of the dose distribution is important because changes in image acquisition parameters may provide dose reduction. In this study, it was used a cylindrical head phantom in PMMA with 5 openings, what allows dose measurement in 5 regions. In a GE CT scanner, Discovery model of 64 channels, the central slice of the head phantom was irradiated and the absorbed doses were measured using a pencil ionization chamber. Radiochromic film strips were placed in the peripheral and in the central region of the head phantom and was performed a scan of 10 cm in the phantom central region. The scan was performed using the head scanning protocol of the radiobiology service, with a voltage of 120 kV. After scanning, the radiochromic film strips were digitalized and their digital images were used to have the dose longitudinal profiles. The dose values recorded have variation in a range of 18.66 to 23.57 mGy. In the results it was compared the dose index values obtained by the pencil chamber measurement to the dose longitudinal profiles recorded by the film strips. (Author)

  10. Dose profile study in head CT scans using radiochromic films

    International Nuclear Information System (INIS)

    Ladino G, A. M.; Prata M, A.

    2016-10-01

    Diagnostic images of computed tomography generate higher doses than other methods of diagnostic radiology using X-ray beam attenuation. Clinical applications of CT have been increased by technological advances, what leads to a wide variety of scanner in the Brazilian technological pool. It has been difficult to implement dose reduction strategies because of the lack of proper guidance on computed tomography examinations. However, CT scanners allow adjusting acquisition parameter according to the patients physical profile and diagnostic application for which the scan is intended. The knowledge of the dose distribution is important because changes in image acquisition parameters may provide dose reduction. In this study, it was used a cylindrical head phantom in PMMA with 5 openings, what allows dose measurement in 5 regions. In a GE CT scanner, Discovery model of 64 channels, the central slice of the head phantom was irradiated and the absorbed doses were measured using a pencil ionization chamber. Radiochromic film strips were placed in the peripheral and in the central region of the head phantom and was performed a scan of 10 cm in the phantom central region. The scan was performed using the head scanning protocol of the radiobiology service, with a voltage of 120 kV. After scanning, the radiochromic film strips were digitalized and their digital images were used to have the dose longitudinal profiles. The dose values recorded have variation in a range of 18.66 to 23.57 mGy. In the results it was compared the dose index values obtained by the pencil chamber measurement to the dose longitudinal profiles recorded by the film strips. (Author)

  11. The Social Profiles of Occupational Therapy Students’ Educational Groups

    Directory of Open Access Journals (Sweden)

    Tore Bonsaksen

    2015-07-01

    Full Text Available Background: Today’s occupational therapy models emphasize that a person’s choice of, satisfaction with, and performance in occupations are markedly influenced by the context. For students undergoing a group-based study module, the group is an important context factor. Until recently, there has been a lack of instruments available for the assessment of functioning and participation at the group level. This mixed methods pilot study aimed to examine occupational therapy students’ perceptions of their group’s level of functioning and course of development during one study module. Methods: The students’ perceptions of their group’s functioning were assessed in two ways: by examining their scores on the Social Profile (SP, a new instrument, and by examining their qualitative descriptions of the groups and how the groups developed over time. The sample consisted of four occupational therapy students. Results: Two students perceived their group functioning as stable over time. One student’s scores indicated an increase in group functioning over time, whereas one student’s showed a decrease. The interview statements showed varying degrees of connectedness with the SP items. Conclusions: Descriptions of stability and change corresponded very well with the students’ SP trajectories, indicating content validity of the assessment as a whole.

  12. A novel approach to surveying sturgeon using side-scan sonar and occupancy modeling

    Science.gov (United States)

    Flowers, H. Jared; Hightower, Joseph E.

    2013-01-01

    Technological advances represent opportunities to enhance and supplement traditional fisheries sampling approaches. One example with growing importance for fisheries research is hydroacoustic technologies such as side-scan sonar. Advantages of side-scan sonar over traditional techniques include the ability to sample large areas efficiently and the potential to survey fish without physical handling-important for species of conservation concern, such as endangered sturgeons. Our objectives were to design an efficient survey methodology for sampling Atlantic Sturgeon Acipenser oxyrinchus by using side-scan sonar and to developmethods for analyzing these data. In North Carolina and South Carolina, we surveyed six rivers thought to contain varying abundances of sturgeon by using a combination of side-scan sonar, telemetry, and video cameras (i.e., to sample jumping sturgeon). Lower reaches of each river near the saltwater-freshwater interface were surveyed on three occasions (generally successive days), and we used occupancy modeling to analyze these data.We were able to detect sturgeon in five of six rivers by using these methods. Side-scan sonar was effective in detecting sturgeon, with estimated gear-specific detection probabilities ranging from 0.2 to 0.5 and river-specific occupancy estimates (per 2-km river segment) ranging from 0.0 to 0.8. Future extensions of this occupancy modeling framework will involve the use of side-scan sonar data to assess sturgeon habitat and abundance in different river systems.

  13. A tool to enhance occupational therapy reasoning from ICF perspective: The Hasselt Occupational Performance Profile (H-OPP).

    Science.gov (United States)

    Ghysels, R; Vanroye, E; Westhovens, M; Spooren, A

    2017-03-01

    In order to enhance occupational therapy reasoning in clinical practice, different elements such as client-centred approach, evidence-based care and interdisciplinary work should be taken into account, but is a challenge. To describe the development of the digital Hasselt Occupational Performance Profile (H-OPP © ) that enhances occupational therapy reasoning from ICF perspective. A participative qualitative design was used to create the H-OPP © in an iterative way in which occupational therapy lectures, ICF experts, students and occupational therapists in the field were involved. After linking occupational therapy terminology to the ICF, different stages of the H-OPP were identified and elaborated with main features: generating an occupational performance profile based on inventarization of problems and possibilities, formulating an occupational performance diagnosis and enabling to create an intervention plan. In all stages, both the perspectives of the client and the occupational therapist were taken into account. To increase practical use, the tool was further elaborated and digitalized. The H-OPP © is a digital coach that guides and facilitates professional reasoning in (novice) occupational therapists. It augments involvement of the client system. Furthermore, it enhances interdisciplinary communication and evidence-based care.

  14. Dopant profiling based on scanning electron and helium ion microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Chee, Augustus K.W., E-mail: kwac2@cam.ac.uk [Centre for Advanced Photonics and Electronics, Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge CB3 0FA (United Kingdom); Boden, Stuart A. [University of Southampton, Electronics and Computer Science, Highfield, Southampton SO17 1BJ (United Kingdom)

    2016-02-15

    In this paper, we evaluate and compare doping contrast generated inside the scanning electron microscope (SEM) and scanning helium ion microscope (SHIM). Specialised energy-filtering techniques are often required to produce strong doping contrast to map donor distributions using the secondary electron (SE) signal in the SEM. However, strong doping contrast can be obtained from n-type regions in the SHIM, even without energy-filtering. This SHIM technique is more sensitive than the SEM to donor density changes above its sensitivity threshold, i.e. of the order of 10{sup 16} or 10{sup 17} donors cm{sup −3} respectively on specimens with or without a p–n junction; its sensitivity limit is well above 2×10{sup 17} acceptors cm{sup −3} on specimens with or without a p–n junction. Good correlation is found between the widths and slopes of experimentally measured doping contrast profiles of thin p-layers and the calculated widths and slopes of the potential energy distributions across these layers, at a depth of 1 to 3 nm and 5 to 10 nm below the surface in the SHIM and the SEM respectively. This is consistent with the mean escape depth of SEs in silicon being about 1.8 nm and 7 nm in the SHIM and SEM respectively, and we conclude that short escape depth, low energy SE signals are most suitable for donor profiling. - Highlights: • Strong doping contrast from n-type regions in the SHIM without energy-filtering. • Sensitivity limits are established of the SHIM and SEM techniques. • We discuss the impact of SHIM imaging conditions on quantitative dopant profiling. • Doping contrast stems from different surface layer thicknesses in the SHIM and SEM.

  15. Occupational Heat Stress Profiles in Selected Workplaces in India.

    Science.gov (United States)

    Venugopal, Vidhya; Chinnadurai, Jeremiah S; Lucas, Rebekah A I; Kjellstrom, Tord

    2015-12-29

    Health and productivity impacts from occupational heat stress have significant ramifications for the large workforce of India. This study profiled occupational heat stress impacts on the health and productivity of workers in select organized and unorganized Indian work sectors. During hotter and cooler seasons, Wet Bulb Globe Temperatures (WBGT) were used to quantify the risk of heat stress, according to International workplace guidelines. Questionnaires assessed workers' perceived health and productivity impacts from heat stress. A total of 442 workers from 18 Indian workplaces participated (22% and 78% from the organized and unorganized sector, respectively). Overall 82% and 42% of workers were exposed to higher than recommended WBGT during hotter and cooler periods, respectively. Workers with heavy workloads reported more heat-related health issues (chi square = 23.67, p ≤ 0.001) and reduced productivity (chi square = 15.82, p ≤ 0.001), especially the outdoor workers. Heat-rashes, dehydration, heat-syncope and urinogenital symptoms were self-reported health issues. Cited reasons for productivity losses were: extended-work hours due to fatigue/exhaustion, sickness/hospitalization and wages lost. Reducing workplace heat stress will benefit industries and workers via improving worker health and productivity. Adaptation and mitigation measures to tackle heat stress are imperative to protect the present and future workforce as climate change progresses.

  16. Occupational Heat Stress Profiles in Selected Workplaces in India

    Science.gov (United States)

    Venugopal, Vidhya; Chinnadurai, Jeremiah S.; Lucas, Rebekah A. I.; Kjellstrom, Tord

    2015-01-01

    Health and productivity impacts from occupational heat stress have significant ramifications for the large workforce of India. This study profiled occupational heat stress impacts on the health and productivity of workers in select organized and unorganized Indian work sectors. During hotter and cooler seasons, Wet Bulb Globe Temperatures (WBGT) were used to quantify the risk of heat stress, according to International workplace guidelines. Questionnaires assessed workers’ perceived health and productivity impacts from heat stress. A total of 442 workers from 18 Indian workplaces participated (22% and 78% from the organized and unorganized sector, respectively). Overall 82% and 42% of workers were exposed to higher than recommended WBGT during hotter and cooler periods, respectively. Workers with heavy workloads reported more heat-related health issues (chi square = 23.67, p ≤ 0.001) and reduced productivity (chi square = 15.82, p ≤ 0.001), especially the outdoor workers. Heat-rashes, dehydration, heat-syncope and urinogenital symptoms were self-reported health issues. Cited reasons for productivity losses were: extended-work hours due to fatigue/exhaustion, sickness/hospitalization and wages lost. Reducing workplace heat stress will benefit industries and workers via improving worker health and productivity. Adaptation and mitigation measures to tackle heat stress are imperative to protect the present and future workforce as climate change progresses. PMID:26729144

  17. Scanning spreading resistance microscopy of shallow doping profiles in silicon

    International Nuclear Information System (INIS)

    Suchodolskis, A.; Hallen, A.; Gran, J.; Hansen, T.-E.; Karlsson, U.O.

    2006-01-01

    We demonstrate the application of scanning spreading resistance microscopy (SSRM) for characterization of shallow highly-conductive layers formed by boron implantation of lowly doped n-type silicon substrate followed by a post-implantation annealing. The electrically active dopant concentration versus depth was obtained from a cross-section of freshly cleaved samples where the Si-surface could be clearly distinguished by depositing a SiO 2 -layer before cleavage. To quantify free carrier concentration we calibrated our data against samples with implanted/annealed boron profiles established by secondary ion mass spectrometry (SIMS). A good fit of SSRM and SIMS data is possible for free carrier concentrations lower than 10 20 cm -3 , but for higher concentrations there is a discrepancy indicating an incomplete activation of the boron

  18. Study of dose profile in TC scanning of cranium

    International Nuclear Information System (INIS)

    Goncalves Junior, R.L.; Oliveira, A.H.; Mourao, A.P.

    2011-01-01

    In this paper it was obtained a dose distribution profile in computerized tomography, when a head simulator object, cylindrical and manufactured in PMMA, were swiped by using the clinical protocol or this device routine. The doses were determined with radiochromic films placed at the four cardinal points and the Center, taking as reference one of object faces. The films were calibrated with pencil ionization chamber in a independent experiment where the obtained doses in the chamber, when a unique central cut or the object were obtained, were confronted with the gray scales on the irradiated films in a similar manner, revealing he factors of conversion mGy.Gray tones -1 which made possible the determination of doses in all the scanning

  19. Profiling Occupant Behaviour in Danish Dwellings using Time Use Survey Data - Part II: Time-related Factors and Occupancy

    DEFF Research Database (Denmark)

    Barthelmes, V.M.; Li, R.; Andersen, R.K.

    2018-01-01

    Occupant behaviour has been shown to be one of the key driving factors of uncertainty in prediction of energy consumption in buildings. Building occupants affect building energy use directly and indirectly by interacting with building energy systems such as adjusting temperature set...... occupant profiles for prediction of energy use to reduce the gap between predicted and real building energy consumptions. In this study, we exploit diary-based Danish Time Use Surveys for understanding and modelling occupant behaviour in the residential sector in Denmark. This paper is a continuation......-points, switching lights on/off, using electrical devices and opening/closing windows. Furthermore, building inhabitants’ daily activity profiles clearly shape the timing of energy demand in households. Modelling energy-related human activities throughout the day, therefore, is crucial to defining more realistic...

  20. Profiling Occupant Behaviour in Danish Dwellings using Time Use Survey Data - Part I: Data Description and Activity Profiling

    DEFF Research Database (Denmark)

    Barthelmes, V.M.; Li, R.; Andersen, R.K.

    2018-01-01

    Occupant behaviour has been shown to be one of the key driving factors of uncertainty in prediction of energy consumption in buildings. Building occupants affect building energy use directly and indirectly by interacting with building energy systems such as adjusting temperature set...... occupant profiles for prediction of energy use to reduce the gap between predicted and real building energy consumptions. To generate accurate occupant profiles for the residential sector in Denmark, the Danish time use surveys are considered an essential data source. The latest Danish diarybased time use......-points, switching lights on/off, using electrical devices and opening/closing windows. Furthermore, building inhabitants’ daily activity profiles clearly shape the timing of energy demand in households. Modelling energy-related human activities throughout the day, therefore, is crucial to defining more realistic...

  1. Changing Occupational Profiles in the Hotel Industry: Case Studies in France, Italy and Spain. Synthesis Report.

    Science.gov (United States)

    Gatti, Mario; Grazia Mereu, Maria; Tagliaferro, Claudio

    Changing occupational profiles in the hotel industry in France, Italy, and Spain were examined in case studies that included interviews with hotel managers, human resource managers, and individuals employed in hotel occupations identified as new or entailing new skills. The study focused on the following topics: (1) changes in the hotel industry…

  2. Psychotherapy: a profile of current occupational therapy practice in Ontario.

    Science.gov (United States)

    Moll, Sandra E; Tryssenaar, Joyce; Good, Colleen R; Detwiler, Lisa M

    2013-12-01

    Psychotherapy can be an important part of psychosocial occupational therapy practice; however, it requires specialized training to achieve and maintain competence. Regulation varies by province, and in Ontario, occupational therapists were recently authorized to perform psychotherapy. The purpose of this study was to explore the psychotherapy practice, training, and support needs of Ontario occupational therapists. An online survey was sent to occupational therapists who had clients with mental health or chronic pain issues, asking about their expertise and support needs in relation to nine psychotherapy approaches. Of the 331 therapists who responded, there were variations in the nature and frequency of psychotherapy practice. Experienced therapists in outpatient settings were more likely to practice psychotherapy, and cognitive-behaviour therapy, motivational interviewing, and mindfulness were the most common approaches. Supervision and training varied, with many therapists interested in occupational therapy-specific training. Recommendations for a framework of support include education about the nature of psychotherapy, training and supervision guidelines, and advocacy for occupational therapy and psychotherapy.

  3. The Occupational Profile of Women with Fibromyalgia Syndrome.

    Science.gov (United States)

    Pérez-de-Heredia-Torres, Marta; Huertas Hoyas, Elisabet; Sánchez-Camarero, Carlos; Pérez-Corrales, Jorge; Fernández de-Las-Peñas, César

    2016-06-01

    The aims of this study were to assess the functional level of women with fibromyalgia; to investigate the differences in the occupational activities between women with fibromyalgia and healthy women; and to analyse the perceived importance of occupational performance during self-care, productivity and leisure activities. A cross-sectional case control study was performed. Twenty women with fibromyalgia and 20 healthy women completed the Functional Independence Measure (FIM), the Canadian Occupational Performance Measure (COPM), a Numerical Pain Rating Scale, the Fibromyalgia Impact Questionnaire and the SF-36 health survey. The Chi-square test (χ2), the Student's t test and the Spearman's test were used on the data. The FIM revealed significant differences regarding several activities: personal hygiene, bathing and memory (p  0.10). Women with fibromyalgia had higher disability and reduced quality of life and required greater assistance to perform specific activities of daily living, i.e. hygiene, than healthy women. This highlights the specific occupational therapy needs these women have for performing many basic activities and for improving their quality of life. Limitations of the study include the small sample size, the exclusion of male participants and the possible influence of the women's psychological status on the assessments performed. Findings should be generalized with caution. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  4. Gamma-ray scanning of neutron activated geological sediments for studying elemental profile distributions

    International Nuclear Information System (INIS)

    Ellinger, M.; Janghorbani, M.; Starke, K.

    1976-01-01

    Gamma-ray scanning for application to elemental profile studies of geological samples was studied with a neutron activated Baltic Shield sediment. Profile distribution of seven elements were measured. The capabilities and limitations of gamma-ray scanning are discussed by comparing the results with profiles obtained after the mechanical subdivision of the sample and the activation of the appropriately sized separates. With respect to the merits and limitations of scanning gamma-ray spectrometry applied to activated complex matrices the following conclusions were drawn. Qualitatively, the scanning method yields the same information as the much more laborious method of mechanical sudbisubdivision. Quantitatively, it is significantly less accurate. The scanning method has the significant advantage of allowing preservation of the sample. This could be important for such speciments as lunar and archeological materials. The method reduces sample preparation time and the possibility of sample contamination. (T.G.)

  5. Profiles of Nature Exposure and Outdoor Activities Associated With Occupational Well-Being Among Employees

    Science.gov (United States)

    Hyvönen, Katriina; Törnroos, Kaisa; Salonen, Kirsi; Korpela, Kalevi; Feldt, Taru; Kinnunen, Ulla

    2018-01-01

    This research addresses the profiles of nature exposure and outdoor activities in nature among Finnish employees (N = 783). The profiles were formed on the bases of nature exposure at work and the frequency and type of outdoor activities in nature engaged in during leisure time. The profiles were investigated in relation to work engagement and burnout. The latent profile analysis identified a five-class solution as the best model: High exposure (8%), Versatile exposure (22%), Unilateral exposure (38%), Average exposure (13%), and Low exposure (19%). An Analysis of Covariance (ANCOVA) was conducted for each well-being outcome in order to evaluate how the identified profiles related to occupational well-being. Participants with a High, Versatile, or Unilateral exposure profile reported significantly higher work engagement in the dimensions of vigor and dedication than did the participants with a Low exposure profile. The participants with the High exposure profile also reported lower burnout in the dimensions of cynicism and professional inadequacy than the participants with the Low exposure profile. Nature exposure during the workday and leisure time is an under researched but important aspect in promoting occupational well-being. PMID:29867699

  6. Deep-depletion physics-based analytical model for scanning capacitance microscopy carrier profile extraction

    International Nuclear Information System (INIS)

    Wong, K. M.; Chim, W. K.

    2007-01-01

    An approach for fast and accurate carrier profiling using deep-depletion analytical modeling of scanning capacitance microscopy (SCM) measurements is shown for an ultrashallow p-n junction with a junction depth of less than 30 nm and a profile steepness of about 3 nm per decade change in carrier concentration. In addition, the analytical model is also used to extract the SCM dopant profiles of three other p-n junction samples with different junction depths and profile steepnesses. The deep-depletion effect arises from rapid changes in the bias applied between the sample and probe tip during SCM measurements. The extracted carrier profile from the model agrees reasonably well with the more accurate carrier profile from inverse modeling and the dopant profile from secondary ion mass spectroscopy measurements

  7. Dose profile study on computerized tomography scanning of skull with simulator object

    International Nuclear Information System (INIS)

    Mourao, A.P.

    2011-01-01

    This work presents a comparison among the dose profiles in scanning of computerized tomography of a simulator object of PMMA in its periphery region. To obtain the deposited dose at the PMMA thermoluminescent dosemeters were used positioned at the interior of PMMA simulated object longitudinal to periphery and at the center of cylinder (positions denominated North, South, East, West and Center). Eight scanning were performed of simulator object using the routine protocol for skull in eight different services of radiodiagnostic by TC

  8. Investigating Public Perception of Occupational Therapy: An Environmental Scan of Three Media Outlets.

    Science.gov (United States)

    Walsh, Wendy E

    Using a phenomenological approach, this study investigated visibility and perception of the profession of occupational therapy in three media outlets. Content analysis occurred on LexisNexis Academic (LNA), Google Images, and Twitter platforms. Analysis of LNA identified the prevalence of articles about occupational therapy in domestic newspapers and similar media avenues, MaxQDA qualitative software coded Google Images from a search on occupational therapy, and AnalyzeWords evaluated Twitter feeds of four health care professions for presence and tone in a social media context. Results indicate that although occupational therapy is 100 years old, its presence in news and online platforms could be stronger. This study suggests that a clear professional identity for occupational therapy practitioners must be strategically communicated through academic and social platforms. Such advocacy promotes the profession, meets the next iteration of occupational therapy's professional vision, and allows occupational therapy to remain a prominent and formidable stakeholder in today's health care marketplace. Copyright © 2018 by the American Occupational Therapy Association, Inc.

  9. Information profiles on potential occupational hazards: nitrophenols. Draft report (Second)

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Information profiles are presented for the following nitrophenols: 2-nitrophenol, 3-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol, and 2,4,6-trinitrophenol. The mononitrophenols were moderately toxic to animals, causing initial stimulation and subsequent depression of the respiratory and central nervous systems. Positive results were obtained in several mutagenicity assays for 3-nitrophenol and 4-nitrophenol. 2,4,-Dinitrophenol was far more acutely toxic than other important nitrophenol derivatives. It was able to uncouple oxidative phosphorylation by suppressing the coupling of electron flow to synthesis of adenosine triphosphatase. It caused weakness, intense thirst and sweating, increased body temperature and respiration rate, neuritis, convulsions, and the rapid onset of rigor mortis after death. It has also caused cataracts in humans when used as a weight-reducing aid. Inhalation of 2,4,6-trinitrophenol has caused considerable irritation to the eyes and to the mucous membrane of the respiratory tract. Dermal exposure has produced severe skin irritation and sensitization.

  10. Occupational status and nutrition profile and health of public municipal employees

    Directory of Open Access Journals (Sweden)

    Patrícia Pinheiro de Freitas

    Full Text Available Abstract Background: Unhealthy lifestyles occur more often in low-socioeconomic status (SES groups. The assessment of isolated factors reduces the understanding of the problem instead of clarifying the dynamic interaction of these factors in influencing the health. Objective: To study the relationship between nutrition habits and health, and the coexistence of dietary risk factors, according to the occupational status of public municipal employees. Materials and Methods: An electronic epidemiological survey was conducted from September to December 2009. In total, 5,646 public municipal employees (temporary and permanent of the municipality (14.7% answered the questionnaire. Sociodemographic information, health, physical activity, nutritional profile, and working conditions related to eating were investigated. Occupational status was defined by the International Socio-Economic Index. The coexistence of dietary risk factors (low consumption of fruits and vegetables, high consumption of chicken skin and meat fat, and insufficient time to eat at work were evaluated using Venn diagrams. Results: Arterial hypertension, diabetes mellitus and overweight were more frequently reported in the low occupational status, and positive self-reported health was directly related to the occupational status of participants. Conclusion: Differences in health conditions and in the dietary habits of individuals according to occupational status indicate its relevance in the development of public and institutional policies that aim to promote health and reduce inequalities and the need for greater focus on those with lower occupational status.

  11. Design and verification of the miniature optical system for small object surface profile fast scanning

    Science.gov (United States)

    Chi, Sheng; Lee, Shu-Sheng; Huang, Jen, Jen-Yu; Lai, Ti-Yu; Jan, Chia-Ming; Hu, Po-Chi

    2016-04-01

    As the progress of optical technologies, different commercial 3D surface contour scanners are on the market nowadays. Most of them are used for reconstructing the surface profile of mold or mechanical objects which are larger than 50 mm×50 mm× 50 mm, and the scanning system size is about 300 mm×300 mm×100 mm. There are seldom optical systems commercialized for surface profile fast scanning for small object size less than 10 mm×10 mm×10 mm. Therefore, a miniature optical system has been designed and developed in this research work for this purpose. Since the most used scanning method of such system is line scan technology, we have developed pseudo-phase shifting digital projection technology by adopting projecting fringes and phase reconstruction method. A projector was used to project a digital fringe patterns on the object, and the fringes intensity images of the reference plane and of the sample object were recorded by a CMOS camera. The phase difference between the plane and object can be calculated from the fringes images, and the surface profile of the object was reconstructed by using the phase differences. The traditional phase shifting method was accomplished by using PZT actuator or precisely controlled motor to adjust the light source or grating and this is one of the limitations for high speed scanning. Compared with the traditional optical setup, we utilized a micro projector to project the digital fringe patterns on the sample. This diminished the phase shifting processing time and the controlled phase differences between the shifted phases become more precise. Besides, the optical path design based on a portable device scanning system was used to minimize the size and reduce the number of the system components. A screwdriver section about 7mm×5mm×5mm has been scanned and its surface profile was successfully restored. The experimental results showed that the measurement area of our system can be smaller than 10mm×10mm, the precision reached to

  12. The profile of CT scan findings in acute head trauma in Orotta ...

    African Journals Online (AJOL)

    The use of investigation modalities are influenced by socioeconomic and cost effectiveness of the tests. Objective and methods: The purpose of the present five months observational study was to describe the profile of cranial computed tomography (CT) scan findings of 110 cases of acute head trauma in Orotta Hospital.

  13. The Atlas of Health and Working Conditions by Occupation. 1. Occupational ranking lists and occupational profiles from periodical occupational health survey data

    NARCIS (Netherlands)

    Broersen, J. P.; van Dijk, F. J.; Weel, A. N.; Verbeek, J. H.

    1995-01-01

    In this article, we describe methods which have been applied in the compilation of the Atlas of Health and Working conditions by Occupation. First, we discuss the need for information systems to identify problems concerning working conditions and health. Such information systems have an exploratory

  14. [Acute myeloid leukemia versus professional occupation: the profile of workers treated at the Recife Hematology Hospital].

    Science.gov (United States)

    Carvalho, Queliane Gomes da Silva; Pedrosa, Wanessa de Aguiar; Sebastião, Quitéria Pereira

    2011-12-01

    The objective of this study was to learn the profile of workers in the economically active age group admitted from 1997 to 2007 to a hematology hospital, diagnosed with acute myeloid leukemia (AML); check which professions have the highest prevalence among the assisted workers who died; and identify the occupational risks compatible with the appearance of AML in the prevalent professions. This is a quantitative, exploratory study. Most profiles were characterized as originally from the agreste and the metropolitan region of the state of Pernambuco, male, white, and with incomplete primary education. The most common occupations were related to agriculture and domestic work, both of which involve the use of chemical substances that, according to literature, are possible factors involved in triggering the pathology.

  15. Developing an occupational skills profile for the emerging profession of "big-data-enabled professional"

    Science.gov (United States)

    Kastens, K. A.; Malyn-Smith, J.; Ippolito, J.; Krumhansl, R.

    2014-12-01

    In August of 2014, the Oceans of Data Institute at Education Development Center, Inc. (EDC) is convening an expert panel to begin the process of developing an occupational skills profile for the "big-data-enabled professional." We define such a professional as an "individual who works with large complex data sets on a regular basis, asking and answering questions, analyzing trends, and finding meaningful patterns, in order to increase the efficiency of processes, make decisions and predictions, solve problems, generate hypotheses, and/or develop new understandings." The expert panel includes several geophysicists, as well as data professionals from engineering, higher education, analytical journalism, forensics, bioinformatics, and telecommunications. Working with experienced facilitators, the expert panel will create a detailed synopsis of the tasks and responsibilities characteristic of their profession, as well as the skills, knowledge and behaviors that enable them to succeed in the workplace. After the panel finishes their work, the task matrix and associated narrative will be vetted and validated by a larger group of additional professionals, and then disseminated for use by educators and employers. The process we are using is called DACUM (Developing a Curriculum), adapted by EDC and optimized for emergent professions, such as the "big-data-enabled professional." DACUM is a well-established method for analyzing jobs and occupations, commonly used in technical fields to develop curriculum and training programs that reflect authentic work tasks found in scientific and technical workplaces. The premises behind the DACUM approach are that: expert workers are better able to describe their own occupation than anyone else; any job can be described in terms of the tasks that successful workers in the occupation perform; all tasks have direct implications for the knowledge, skills, understandings and attitudes that must be taught and learned in preparation for the

  16. Brief communication "Application of mobile laser scanning in snow cover profiling"

    Directory of Open Access Journals (Sweden)

    S. Kaasalainen

    2011-03-01

    Full Text Available We present a snowmobile-based mobile mapping system and its first application to snow cover roughness and change detection measurement. The ROAMER mobile mapping system, constructed at the Finnish Geodetic Institute, consists of the positioning and navigating systems, a terrestrial laser scanner, and the carrying platform (a snowmobile sledge in this application. We demonstrate the applicability of the instrument to snow cover roughness profiling and change detection by presenting preliminary results from a mobile laser scanning (MLS campaign. The results show the potential of MLS for fast and efficient snow profiling from large areas in a millimetre scale.

  17. Simulators of tray distillation columns as tools for interpreting gamma-ray scan profile signal

    International Nuclear Information System (INIS)

    Offei-Mensah, P.S.; Gbadago, J.K.; Dagadu, C.P.K.; Danso, K.A.

    2008-01-01

    Simulators of tray distillation columns were used to provide technical guidelines for interpreting signals from gamma ray scans used for analysing malfunctions in distillation columns. The transmitted radiation intensities at 0.05 m intervals were determined from top to bottom of simulators of tray distillation columns exposed to 20 mCi of '1'3'7 Cs. Signals generated from the simulators were identical with the experimental signals obtained from the stabilizer column of the crude oil distillation unit at the Tema Oil Refinery Ghana Limited. Changes in the signal level were observed with changes in diameter, type of material (gasoline, air, debris, steel) and orientation of scan line. The analysis provided accurate interpretation of gamma scan profiles. (au)

  18. 3-D x-ray mirror metrology with a vertical scanning long trace profiler

    International Nuclear Information System (INIS)

    Takacs, P.Z.; Li, H.; Li, X.; Grindel, M.W.

    1996-01-01

    The long trace profiler (LTP) was originally developed at Brookhaven National Laboratory for the specific purpose of measuring the surface figure of large cylindrical mirrors used at grazing incidence in synchrotron radiation (SR) beamlines. In its original configuration, it could measure only along one line down the center of the cylinder. A single linear profile is often sufficient to gauge the quality of the optical surface on these kinds of mirrors. For some applications it is necessary to measure the topography of the entire surface, not just along one line but over a grid that covers the entire surface area. We have modified a standard LTP to enable measurement of the complete surface of Wolter telescope optics in a vertical configuration. The vertical scanning LTP (VSLTP) is capable of producing a complete 3-D map of the surface topography errors relative to the ideal desired surface on complete segments of paraboloids and hyperboloids. The instrument uses a penta prism assembly to scan the probe beam in the longitudinal direction parallel to the mirror symmetry axis and uses a precision rotary stage to provide scans in the azimuthal direction. A Risley prism pair and a dove prism are used to orient the probe beam in the proper direction for the azimuthal scans. The repeatability of the prototype instrument is better than 20 nm over trace lengths of 35 mm with a slope measurement accuracy of about 1 microradian. copyright 1996 American Institute of Physics

  19. Internal exposure profile of occupational workers of a BWR type atomic power station

    International Nuclear Information System (INIS)

    Hegde, A.G.; Bhat, I.S.

    1979-01-01

    The internal exposure profile of major radionuclides, for Tarapur Atomic Power Station (India) occupational staff for the last 9 years (1970-1978) of station operation, is presented. This power station has two boiling water reactor units. The occupational staff were monitored for internal exposure with the whole body counter. It has been observed that 60 Co, 134 Cs and 137 Cs are major contaminants. The highest yearly average of internal exposure was less than 1% of maximum permissible body burden recommended by ICRP. Depending on the nature of exposures the power station employees were classified under four different groups, (i) maintenance, (ii) operations, (iii) techanical and (iv) non-technical. This study revealed that maintenance group had highest incidence of internal exposure among these. It is also observed that contribution of 60 Co is maximum in the exposure of this group. (B.G.W.)

  20. Genome-wide nucleosome occupancy and DNA methylation profiling of four human cell lines

    Directory of Open Access Journals (Sweden)

    Aaron L. Statham

    2015-03-01

    Full Text Available DNA methylation and nucleosome positioning are two key mechanisms that contribute to the epigenetic control of gene expression. During carcinogenesis, the expression of many genes is altered alongside extensive changes in the epigenome, with repressed genes often being associated with local DNA hypermethylation and gain of nucleosomes at their promoters. However the spectrum of alterations that occur at distal regulatory regions has not been extensively studied. To address this we used Nucleosome Occupancy and Methylation sequencing (NOMe-seq to compare the genome-wide DNA methylation and nucleosome occupancy profiles between normal and cancer cell line models of the breast and prostate. Here we describe the bioinformatic pipeline and methods that we developed for the processing and analysis of the NOMe-seq data published by (Taberlay et al., 2014 [1] and deposited in the Gene Expression Omnibus with accession GSE57498.

  1. Microscopic image processing system for measuring nonuniform film thickness profiles: Image scanning ellipsometry

    International Nuclear Information System (INIS)

    Liu, A.H.; Plawsky, J.L.; Wayner, P.C. Jr.

    1993-01-01

    The long-term objective of this research program is to determine the stability and heat transfer characteristics of evaporating thin films. The current objective is to develop and use a microscopic image-processing system (IPS) which has two parts: an image analyzing interferometer (IAI) and an image scanning ellipsometer (ISE). The primary purpose of this paper is to present the basic concept of ISE, which is a novel technique to measure the two dimensional thickness profile of a non-uniform, thin film, from several nm up to several μm, in a steady state as well as in a transient state. It is a full-field imaging technique which can study every point on the surface simultaneously with high spatial resolution and thickness sensitivity, i.e., it can measure and map the 2-D film thickness profile. The ISE was tested by measuring the thickness profile and the refractive index of a nonuniform solid film

  2. Measurement of position and profile of undulator radiation in Indus-2 using scanning wire monitor

    International Nuclear Information System (INIS)

    Kant, Chander; Lal, Sohan; Raghuwanshi, V.K.; Prasad, Vijendra

    2015-01-01

    Two planar undulators (U1 and U2) for Atomic Molecular Spectroscopy (AMOS) beamline and Angle Resolved Photoelectron Spectroscopy (ARPES) beamline have been installed in Indus-2. The U1 undulator is designed to produce photons in the energy range of 6 eV to 250 eV and U2 undulator is designed to produce photons in the energy range of 30 eV to 600 eV. In order to measure the position and vertical profile of photon beams emitted from these undulators, one scanning wire monitor has been installed in each beamline front end. In these scanning wire monitors, a gold coated tungsten wire of 100 μm thickness, stretched between a fork shaped alumina ceramic holder, is scanned vertically perpendicular to the direction of propagation of photon beam by using a precisely controlled stepper motor. The photo-electron current generated in the wire is measured by an electrometer. A graphical user interface has been developed which facilitates the scanning as per the given range, plots the graphs and stores the scanned data in Excel file. This paper describes our experience and usefulness of these wire monitors during commissioning of planar undulators in Indus-2. (author)

  3. Task profile and risk of occupational hepatitis A infection in sewerage workers.

    Science.gov (United States)

    Nuebling, M; Hofmann, F

    2001-10-01

    The aim of the study was to assess to what extent parameters of task-related occupational exposure influence anti-hepatitis A virus (anti-HAV) seroprevalence in sewerage workers, using a new instrument for classification of exposure. A new instrument for the assessment of work-related infection hazards was developed based on expert interviews, evaluation of literature and theoretical considerations. It was included in a questionnaire for collecting detailed information on occupational exposure, safety awareness, safety behaviour and socio-demography. Anti-HAV status was assessed for all (n = 343) (non-vaccinated) study participants. Marked differences in task profile and task-related exposure within the group of sewerage workers were found, underlining the necessity of a detailed exposure analysis. In a multivariate model three risk factors that were related significantly to anti-HAV positivity were identified: age, country of origin and task-related exposure. Since task profiles and occupational exposure differ strongly within the job category of sewerage workers. evaluation of endangerment has to reflect individual task-related exposure. The task-exposure matrix developed and presented in this study is a practicable and valid instrument for exposure assessment and may be used for the exposure analysis of further biological agents in this working environment. Besides the known risk parameters age and origin, our study demonstrates a dose-response relationship between the degree of occupational exposure and the anti-HAV seroprevalence. Therefore, an effective worksite HAV-prevention programme should consider all technical, structural and educational measures that help to reduce individual exposure.

  4. The structured-objective rorschach test (sort occupational profile for state accountants

    Directory of Open Access Journals (Sweden)

    J. J. Gouws

    1996-06-01

    Full Text Available The objective of this study was to provide an occupational profile of performance on the Structured-Objective Rorschach Test (SORT by state accountants for use in guidance, election and placement of personnel. The sample comprised accountants and auditors from the financial sections in various state institutions who were selected for the Senior Financial Management Course at the University of Stellenbosch. As all participants were considered successful in their occupation and no significant differences were found between the profiles of various age and year groups, the SORT profile obtained for the total group can be used as a predictor to determine and evaluate the personality traits that are important in the profession of state accountant. Opsomming Die doel van hierdie studie was die daarstelling van 'n beroepsprofiel van staatsrekenmeesters se prestasie op die Gestruktureerd-Objektiewe Rorschachtoets (SORT wat vir voorligting/ keuring en plasing van personeel gebruik kan word. Die steekproef is saamgestel uit rekenmeesters en ouditeure van die finansiele afdelings in verskeie staatsinstansies wat geselekteer is vir die Senior Finansiele Bestuurskursus by die Universiteit van Stellenbosch. Aangesien alle deelnemers as suksesvol in hulle beroep beskou is en geen beduidende verskille in die profiele van verskillende ouderdomsgroepe en jaargroepe gevind is nie, kan die SORT profiel van die totale groep as 'n voorspeller gebruik word vir die bepaling en evaluering van die persoonlikheidseienskappe wat belangrik is in die beroep van staatsrekenmeester.

  5. Dose profile variation with voltage in head CT scans using radiochromic films

    Science.gov (United States)

    Mourão, A. P.; Alonso, T. C.; DaSilva, T. A.

    2014-02-01

    The voltage source used in an X-ray tube is an important part of defining the generated beam spectrum energy profile. The X-ray spectrum energy defines the X-ray beam absorption as well as the characteristics of the energy deposition in an irradiated object. Although CT scanners allow one to choose between four different voltage values, most of them employ a voltage of 120 kV in their scanning protocols, regardless of the patient characteristics. Based on this fact, this work investigated the deposited dose in a polymethyl methacrylate (PMMA) cylindrical head phantom. The entire volume was irradiated twice. Two CT scanning protocols were used with two different voltage values: 100 and 120 kV. The phantom volume was irradiated, and radiochromic films were employed to record dose profiles. Measurements were conducted with a calibrated pencil ionization chamber, which was positioned in the center and in four peripheral bores of the head PMMA phantom, to calibrate the radiochromic films. The central slice was then irradiated. This procedure allowed us to find the conversion factors necessary to obtain dose values recorded in the films. The data obtained allowed us to observe the dose variation profile inside the phantom head as well as in the peripheral and central regions. The peripheral region showed higher dose values than those of the central region for scans using both voltage values: approximately 31% higher for scanning with 120 kV and 25% higher with 100 kV. Doses recorded with the highest voltage are significantly higher, approximately 50% higher in the peripheral region and 40% higher in the central region. A longitudinal variation could be observed, and the maximum dose was recorded at the peripheral region, at the midpoint of the longitudinal axis. The obtained results will most likely contribute to the dissemination of proper procedure as well as to optimize dosimetry and tests of quality control in CT because the choice of protocols with different voltage

  6. Two-dimensional dopant profiling of gallium nitride p-n junctions by scanning capacitance microscopy

    Science.gov (United States)

    Lamhamdi, M.; Cayrel, F.; Frayssinet, E.; Bazin, A. E.; Yvon, A.; Collard, E.; Cordier, Y.; Alquier, D.

    2016-04-01

    Two-dimensional imaging of dopant profiles for n and p-type regions are relevant for the development of new power semiconductors, especially for gallium nitride (GaN) for which classical profiling techniques are not adapted. This is a challenging task since it needs a technique with simultaneously good sensitivity, high spatial resolution and high dopant gradient resolution. To face these challenges, scanning capacitance microscopy combined with Atomic Force Microscopy is a good candidate, presenting reproducible results, as demonstrated in literature. In this work, we attempt to distinguish reliably and qualitatively the various doping concentrations and type at p-n and unipolar junctions. For both p-n and unipolar junctions three kinds of samples were prepared and measured separately. The space-charge region of the p-n metallurgical junction, giving rise to different contrasts under SCM imaging, is clearly observed, enlightening the interest of the SCM technique.

  7. Two-dimensional dopant profiling of gallium nitride p–n junctions by scanning capacitance microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Lamhamdi, M. [GREMAN UMR 7347-Université de Tours, 10 Rue Thales de Milet, BP 7155, 37071 Tours (France); Ecole national des sciences appliquées khouribga, Université Hassan 1er, 26000 Settat (Morocco); Cayrel, F. [GREMAN UMR 7347-Université de Tours, 10 Rue Thales de Milet, BP 7155, 37071 Tours (France); Frayssinet, E. [CRHEA-CNRS, Rue Bernard Grégory, Sophia Antipolis, 06560 Valbonne (France); Bazin, A.E.; Yvon, A.; Collard, E. [STMicroelectronics, 16 Rue Pierre et Marie Curie, BP 7155, 37071 Tours (France); Cordier, Y. [CRHEA-CNRS, Rue Bernard Grégory, Sophia Antipolis, 06560 Valbonne (France); Alquier, D. [GREMAN UMR 7347-Université de Tours, 10 Rue Thales de Milet, BP 7155, 37071 Tours (France)

    2016-04-01

    Two-dimensional imaging of dopant profiles for n and p-type regions are relevant for the development of new power semiconductors, especially for gallium nitride (GaN) for which classical profiling techniques are not adapted. This is a challenging task since it needs a technique with simultaneously good sensitivity, high spatial resolution and high dopant gradient resolution. To face these challenges, scanning capacitance microscopy combined with Atomic Force Microscopy is a good candidate, presenting reproducible results, as demonstrated in literature. In this work, we attempt to distinguish reliably and qualitatively the various doping concentrations and type at p–n and unipolar junctions. For both p–n and unipolar junctions three kinds of samples were prepared and measured separately. The space-charge region of the p–n metallurgical junction, giving rise to different contrasts under SCM imaging, is clearly observed, enlightening the interest of the SCM technique.

  8. Depth profiling: RBS versus energy-dispersive X-ray imaging using scanning transmission electron microscopy

    International Nuclear Information System (INIS)

    Markwitz, Andreas

    2000-01-01

    Rutherford backscattering spectrometry (RBS) is known to be one of the techniques ideal for analysis of thin films. Elemental concentrations of matrix components and impurities can be investigated as well as depth profiles of almost each element of the periodic table. Best of all, RBS has both a high sensitivity and a high depth resolution, and is a non-destructive analysis technique that does not require specific sample preparation. Solid-state samples are mounted without preparation inside a high-vacuum analysis chamber. However, depth-related interpretation of elemental depth profiles requires the material density of the specimen and stopping power values to be taken into consideration. In many cases, these parameters can be estimated with sufficient precision. However, the assumed density can be inaccurate for depth scales in the nanometer range. For example, in the case of Ge nanoclusters in 500 nm thick SiO 2 layers, uncertainty is related to the actual position of a very thin Ge nanocluster band. Energy-dispersive X-ray emission (EDX) spectroscopy, using a high-resolution scanning transmission electron microscope (STEM) can assist in removing this uncertainty. By preparing a thin section of the specimen, EDX can be used to identify the position of the Ge nanocluster band very precisely, by correlating the Ge profile with the depth profiles of silicon and oxygen. However, extraction of the concentration profiles from STEM-EDX spectra is in general not straightforward. Therefore, a combination of the two very different analysis techniques is often the best and only successful way to extract high-resolution concentration profiles

  9. Occupational Radiation Exposure to the Extremities of Medical Staff during Hysterosalpingography and Radionuclide Bone Scan Procedures in Several Nigerian Hospitals

    Directory of Open Access Journals (Sweden)

    Nnamdi Norbert Jibiri

    2016-10-01

    Full Text Available Objective: The practice of regular dose measurement helps to ascertain the level of occupational dose delivered to the staff involved in diagnostic procedures. This study was carried out to evaluate the dose exposed to the hands of radiologists and a radiologic technologist carrying out HSG and radionuclide bone scan examinations in several hospitals in Nigeria. Methods: Radiation doses exposed to the hands of radiologists and a technician carrying out hysterosalpingography (HSG and bone scan procedures were measured using calibrated thermo-luminescent dosimeters. Five radiologists and a radiologic technologist were included in the study for dose measurement. Results: The study indicates that each radiologist carried out approximately 2 examinations per week with the mean dose ranging between 0.49-0.62 mSv per week, resulting in an annual dose of 191 mSv. Similarly, the occupational dose delivered to both the left and right hands of a radiologic technologist administering 99mTc-methylene diphosphonate (MDP without cannula and with cannula were 10.68 (720.2 and 13.82 (556.4 mSv per week (and per annum, respectively. It was determined that the left hand of the personnel received higher doses than their right hand. Conclusion: The estimated annual dose during HSG is far below the annual dose limit for deterministic effects, however, it is greater than 10% of the applicable annual dose limit. Hence, routine monitoring is required to ensure adequate protection of the personnel. The total annual dose received during the bone scan exceeds the annual dose limit for both hands, and the dose to either left or right hand is greater than the dose limit of 500 mSv/yr. The radiologists monitored are not expected to incur any deterministic effects during HSG examinations, however, accumulated doses arising from the scattered radiation to the eyes, legs, and neck could be substantial and might lead to certain effects. More staff are required to administer 99m

  10. [Occupational asthma: Clinical and professional profile of the Tunisian asthmatic worker].

    Science.gov (United States)

    Toujani, S; Hedhli, A; Mjid, M; Ben Salah, N; Ouahchy, Y; Louzir, B; Daghfous, J; Mhiri, N; Cherif, J; Beji, M

    2016-08-01

    Asthma takes up a great importance in occupational diseases but remains underestimated as it is insufficiently diagnosed. We aimed to access the clinical and professional profile of the Tunisian asthmatic worker. It was a retrospective descriptive study in a professional pathology unit in a university hospital. All patients referred by their doctor for symptoms suggestive of occupational asthma, during a period from 2000 to 2008, were included. Forty-eight patients were selected from 172. The mean age was 40 years, with a male predominance (56 %). In 2/3 of the cases, it was the textile workers, food and chemical industry. The etiological agents incriminated were textile dust in 18.8 % of cases followed by isocyanates and flour. Typical episodes of wheezing dyspnea were present in 52 % and atopy in 54.2 % of workers. In 2 % of cases, symptoms disappeared and worsened in 18.8 %. The prognosis of OA depends on early end accurate diagnosis. The physician's role is to initiate the appropriate diagnostic approach, which must comply with the Tunisian conditions. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  11. Information profiles on potential occupational hazards: Inorganic chromium compounds. Draft report (Second)

    Energy Technology Data Exchange (ETDEWEB)

    1982-02-01

    Information profiles are presented for the following inorganic chromium compounds: chromic(VI) acid, chromic(III) hydroxide, chromic(III) oxide, chromic(III) sulfate, chromic(III) sulfate (basic), chromium dioxide, potassium dichromate(VI), lead chromate, sodium-chromate(VI), sodium-dichromate(VI), and zinc-yellow-chromate(VI). Biological effects of hexavalent chromium in humans included skin ulceration, dermatitis, nasal membrane irritation and ulceration, nasal septal perforation, rhinitis, nosebleed, nephritis, liver damage, epigastric pain, pulmonary congestion and edema, and erosion and discoloration of teeth. Chromium(VI) compounds caused mutations in a variety of systems. Exposure to trivalent chromium in the work place has caused contact dermatitis and chrome ulcers. Epidemiological studies indicated respiratory carcinogenicity among workers occupationally exposed during chromate production.

  12. Effect of hydroxyurea on the promoter occupancy profiles of tumor suppressor p53 and p73

    Directory of Open Access Journals (Sweden)

    Lu Xin

    2009-06-01

    Full Text Available Abstract Background The p53 tumor suppressor and its related protein, p73, share a homologous DNA binding domain, and mouse genetics studies have suggested that they have overlapping as well as distinct biological functions. Both p53 and p73 are activated by genotoxic stress to regulate an array of cellular responses. Previous studies have suggested that p53 and p73 independently activate the cellular apoptotic program in response to cytotoxic drugs. The goal of this study was to compare the promoter-binding activity of p53 and p73 at steady state and after genotoxic stress induced by hydroxyurea. Results We employed chromatin immunoprecipitation, the NimbleGen promoter arrays and a model-based algorithm for promoter arrays to identify promoter sequences enriched in anti-p53 or anti-p73 immunoprecipitates, either before or after treatment with hydroxyurea, which increased the expression of both p53 and p73 in the human colon cancer cell line HCT116-3(6. We calculated a model-based algorithm for promoter array score for each promoter and found a significant correlation between the promoter occupancy profiles of p53 and p73. We also found that after hydroxyurea treatment, the p53-bound promoters were still bound by p73, but p73 became associated with additional promoters that that did not bind p53. In particular, we showed that hydroxyurea induces the binding of p73 but not p53 to the promoter of MLH3, which encodes a mismatch repair protein, and causes an up-regulation of the MLH3 mRNA. Conclusion These results suggest that hydroxyurea exerts differential effects on the promoter-binding functions of p53 and p73 and illustrate the power of model-based algorithm for promoter array in the analyses of promoter occupancy profiles of highly homologous transcription factors.

  13. Pinhole bone scan mapping of metabolic profiles in osteoarthritis of the knee: a radiographic correlation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. H.; Kim, H. H.; Chung, Y. A.; Chung, S. K.; Bahk, Y. W. [College of Medicine, The Catholic Univ. of Korea, Seoul (Korea, Republic of)

    1999-07-01

    Osteoarthritis (OA) is mixture of damage to a joint and reaction induced therefrom. Heterogeneity, slow change and no proper means of assessing pathology make it a difficult disease to study. Diagnosis can be made by radiography when OA is established. But subtle metabolic change without radiographic alteration can only be detected by bone scan. Present study was performed to assess metabolic profiles of OA of the knee with various radiographic and preradiographic changes using pinhole bone scan (PBS). PBS and radiography were taken at the same time or a few days apart. We used single-head gamma camera and a 4-mm pinhole collimator. Patients were 9 men and 19 women (30-74 yr with mean being 55). PBS was correlated with radiography in each case. Increased tracer uptake was seen in 111 lesions in 28 knees. Intensity was arbitrarily graded into Grade 0-2. The results were divided into group with radiographic change (n=85; Table) and group without (n=26). Generally, tracer uptake was much intense in the sclerotic and cystic form. In radiographically normal group pathological uptake occurred mostly in subchondral bone (n=17) and some in the femoral condyle (n=9) denoting that subchondral bone is the most vulnerable. PBS is sensitive indicator of metabolic alternations in various disease processes of OA in both radiographically normal and abnormal cases.

  14. Impact of measurement approach on the quality of gamma scanning density profile in a tray type lab-scale column

    International Nuclear Information System (INIS)

    Shahabinejad, H.; Feghhi, S.A.H.; Khorsandi, M.

    2014-01-01

    This article presents a study for investigating impact of the measurement approach on the quality of gamma scanning density profile in tray type columns using experimental and computational evaluations. Experimental density profiles from the total and the photopeak count measurements, as two approaches in gamma ray column scanning technique, has been compared with the computational density profile from Monte Carlo simulation results. We used a laboratory distillation column of 51 cm diameter as an illustrative example for this investigation. 137 Cs was used as a gamma ray source with the activity of 296 MBq (8 mCi), with a NaI(Tl) detector. MCNP4C Monte Carlo code has been used for simulations. The quality of the density profile in the photopeak count approach is relatively within 155–204% better than that of the total count approach for experimental results. The same comparison for simulation results leads to a relative difference within 100–135% for the density profile. - Highlights: • The quality of density profile in gamma scanning technique has been studied. • Quality of density profile depends on the measurement approach. • A laboratory distillation column has been used as an illustrative example. • MCNP4C Monte Carlo code has been used for simulations

  15. Occupational injuries and illnesses in rubber factory: Profile, Potential Hazards and possible prevention

    Directory of Open Access Journals (Sweden)

    Tri Hari Irfani

    2015-12-01

    Full Text Available Rubber is one of the important commodities in the world. Globally, workers are facing so many problems of hazards that produce by rubber process. In Indonesia, there are several data of occupational problems such as respiratory diseases, muscle and skeletal diseases, gastrointestinal diseases, diseases of the teeth and oral cavity, skin diseases and skin tissue. In Iranian rubber factory, Iran, workers had suffered from some kind of musculoskeletal symptoms. Stomach and liver cancers in workers are having in Shanghai tire factory. In addition, Germany has cancer problem of their workers who work in rubber factory. Most of the rubber process in the factory can cause some hazards of the workers. In unloading area and area that operator is taking the dirt manually, workers are facing ergonomic problems. The possible control is reduce weight of load, team lift the object with two or more workers and Use mechanical assist. Machine safeguarding is essential for protecting from Cutting process that can make workers amputation organs such as hands, and fingers. In bale process, the workers need to cut raw rubber into bale in bale cutting. Furthermore, workers are facing with amputation problem. To manage that, It must be designed as a standard which has interlocking guards to prevent access to the cutting area. When wrapped using plastic, workers use a heated iron and sticked in plastic so that it blends neatly. The risks are fingers can cut accidently and then the workers also get contamination from polyvinyl chloride (PVC. The possible preventions are use an automatic plastic wrapping machine with palletized product sitting on a turntable and respirator. Another problem is contact dermatitis that has been reported frequently among rubber workers. The prevention for that problem is using Gloves. The aim of researcher is to provide the profile of occupational injuries and illnesses, potential hazards in rubber factory to prevent the workers.

  16. Profile of 1 year of fieldwork experiences for undergraduate occupational therapy students from a large regional Australian university.

    Science.gov (United States)

    Mackenzie, Lynette; O'Toole, Gjyn

    2017-10-01

    Objective Fieldwork experience is a significant component of many health professional education programs and affects future practice for graduates. The present study used self-reported student data to produce a profile of undergraduate student placement experiences. Methods Cross-sectional surveys exploring placement location, setting and client types, models of supervision, interventions and financial costs were completed by students following each placement. Data were analysed using descriptive analysis. Results Placements were predominantly conducted outside capital cities (69.8%; n=184), with 25.8% (n=68) in rural settings. Students experienced predominantly public health in-patient settings and community settings, with only 15% experiencing private settings. Conclusions The placement profile of undergraduate occupational therapy students appeared to be consistent with workforce reports on occupational therapy professional practice. What is known about the topic? Fieldwork experienced by health professional students is critical to preparing new graduates for practice. Although the World Federation of Occupational Therapy provides guidance on what is required for occupational therapy fieldwork experience, little is known about what students actually experience during their fieldwork placements. What does this paper add? The present study is the first to document the range of fieldwork experienced by occupational therapy students in one program over 1 year, and provides the basis for comparison with other occupational therapy programs, as well as other disciplines nationally and internationally. What are the implications for practitioners? Occupational therapy students experienced few opportunities in private practice or speciality services, and had mostly one-on-one supervision. To provide a future workforce that is able to address the changing health system, it is vital that students are exposed to a range of fieldwork experiences and supervision styles that

  17. Beam-scanning system for determination of beam profiles and form factors in merged-beam experiments

    International Nuclear Information System (INIS)

    Keyser, C.J.; Froelich, H.R.; Mitchell, J.B.A.; McGowan, J.W.

    1979-01-01

    A beam-scanning system for a merged electron-ion beam experiment is described. This system is used to determine the horizontal and vertical beam profiles and the form factors at three different locations along the axis of the beams. Design details of the wedge-shaped scanners and the electronic circuit for obtaining beam profiles and form factors are described. The form factor derivation for merged beams is given and an expression in terms of measured quantities is derived. (author)

  18. Structural analysis and dimerization profile of the SCAN domain of the pluripotency factor Zfp206

    KAUST Repository

    Liang, Yu; Huimei Hong, Felicia; Ganesan, Pugalenthi; Jiang, Sizun; Jauch, Ralf; Stanton, Lawrence W.; Kolatkar, Prasanna R.

    2012-01-01

    Zfp206 (also named as Zscan10) belongs to the subfamily of C2H2 zinc finger transcription factors, which is characterized by the N-terminal SCAN domain. The SCAN domain mediates self-association and association between the members of SCAN family transcription factors, but the structural basis and selectivity determinants for complex formation is unknown. Zfp206 is important for maintaining the pluripotency of embryonic stem cells presumably by combinatorial assembly of itself or other SCAN family members on enhancer regions. To gain insights into the folding topology and selectivity determinants for SCAN dimerization, we solved the 1.85 crystal structure of the SCAN domain of Zfp206. In vitro binding studies using a panel of 20 SCAN proteins indicate that the SCAN domain Zfp206 can selectively associate with other members of SCAN family transcription factors. Deletion mutations showed that the N-terminal helix 1 is critical for heterodimerization. Double mutations and multiple mutations based on the Zfp206SCAN-Zfp110SCAN model suggested that domain swapped topology is a possible preference for Zfp206SCAN-Zfp110SCAN heterodimer. Together, we demonstrate that the Zfp206SCAN constitutes a protein module that enables C2H2 transcription factor dimerization in a highly selective manner using a domain-swapped interface architecture and identify novel partners for Zfp206 during embryonal development. 2012 The Author(s).

  19. Structural analysis and dimerization profile of the SCAN domain of the pluripotency factor Zfp206

    KAUST Repository

    Liang, Yu

    2012-06-26

    Zfp206 (also named as Zscan10) belongs to the subfamily of C2H2 zinc finger transcription factors, which is characterized by the N-terminal SCAN domain. The SCAN domain mediates self-association and association between the members of SCAN family transcription factors, but the structural basis and selectivity determinants for complex formation is unknown. Zfp206 is important for maintaining the pluripotency of embryonic stem cells presumably by combinatorial assembly of itself or other SCAN family members on enhancer regions. To gain insights into the folding topology and selectivity determinants for SCAN dimerization, we solved the 1.85 crystal structure of the SCAN domain of Zfp206. In vitro binding studies using a panel of 20 SCAN proteins indicate that the SCAN domain Zfp206 can selectively associate with other members of SCAN family transcription factors. Deletion mutations showed that the N-terminal helix 1 is critical for heterodimerization. Double mutations and multiple mutations based on the Zfp206SCAN-Zfp110SCAN model suggested that domain swapped topology is a possible preference for Zfp206SCAN-Zfp110SCAN heterodimer. Together, we demonstrate that the Zfp206SCAN constitutes a protein module that enables C2H2 transcription factor dimerization in a highly selective manner using a domain-swapped interface architecture and identify novel partners for Zfp206 during embryonal development. 2012 The Author(s).

  20. Stratospheric isotopic water profiles from a single submillimeter limb scan by TELIS

    Directory of Open Access Journals (Sweden)

    A. de Lange

    2009-08-01

    Full Text Available Around 490 GHz relatively strong HDO and H218O emission lines can be found in the submillimeter thermal-emission spectrum of the Earth's atmosphere, along with lines of the principal isotopologue of water vapour. These can be used for remote sensing of the rare/principal isotope ratio in the stratosphere. A sensitivity study has been performed for retrieval simulations of water isotopologues from balloon-borne measurements by the limb sounder TELIS (TErahertz and submillimeter LImb Sounder. The study demonstrates the capability of TELIS to determine, from a single limb scan, the profiles for H218O and HDO between 20 km and 37 km with a retrieval error of ≈3 and a spatial resolution of 1.5 km, as determined by the width of the averaging kernel. In addition HDO can be retrieved in the range of 10–20 km, albeit with a strongly deteriorated retrieval error. Expected uncertainties in instrumental parameters have only limited impact on the retrieval results.

  1. Modeling streamflow from coupled airborne laser scanning and acoustic Doppler current profiler data

    Science.gov (United States)

    Norris, Lam; Kean, Jason W.; Lyon, Steve

    2016-01-01

    The rating curve enables the translation of water depth into stream discharge through a reference cross-section. This study investigates coupling national scale airborne laser scanning (ALS) and acoustic Doppler current profiler (ADCP) bathymetric survey data for generating stream rating curves. A digital terrain model was defined from these data and applied in a physically based 1-D hydraulic model to generate rating curves for a regularly monitored location in northern Sweden. Analysis of the ALS data showed that overestimation of the streambank elevation could be adjusted with a root mean square error (RMSE) block adjustment using a higher accuracy manual topographic survey. The results of our study demonstrate that the rating curve generated from the vertically corrected ALS data combined with ADCP data had lower errors (RMSE = 0.79 m3/s) than the empirical rating curve (RMSE = 1.13 m3/s) when compared to streamflow measurements. We consider these findings encouraging as hydrometric agencies can potentially leverage national-scale ALS and ADCP instrumentation to reduce the cost and effort required for maintaining and establishing rating curves at gauging station sites similar to the Röån River.

  2. Assessing biomass based on canopy height profiles using airborne laser scanning data in eucalypt plantations

    Directory of Open Access Journals (Sweden)

    André Gracioso Peres Silva

    2015-12-01

    Full Text Available This study aimed to map the stem biomass of an even-aged eucalyptus plantation in southeastern Brazil based on canopy height profile (CHPs statistics using wall-to-wall discrete return airborne laser scanning (ALS, and compare the results with alternative maps generated by ordinary kriging interpolation from field-derived measurements. The assessment of stem biomass with ALS data was carried out using regression analysis methods. Initially, CHPs were determined to express the distribution of laser point heights in the ALS cloud for each sample plot. The probability density function (pdf used was the Weibull distribution, with two parameters that in a secondary task, were used as explanatory variables to model stem biomass. ALS metrics such as height percentiles, dispersion of heights, and proportion of points were also investigated. A simple linear regression model of stem biomass as a function of the Weibull scale parameter showed high correlation (adj.R2 = 0.89. The alternative model considering the 30th percentile and the Weibull shape parameter slightly improved the quality of the estimation (adj.R2 = 0.93. Stem biomass maps based on the Weibull scale parameter doubled the accuracy of the ordinary kriging approach (relative root mean square error = 6 % and 13 %, respectively.

  3. Measurements of CO2 Concentration and Wind Profiles with A Scanning 1.6μm DIAL

    Science.gov (United States)

    Abo, M.; Shibata, Y.; Nagasawa, C.; Nagai, T.; Sakai, T.; Tsukamoto, M.

    2012-12-01

    Horizontal carbon dioxide (CO2) distribution and wind profiles are important information for understanding of the regional sink and source of CO2. The differential absorption lidar (DIAL) and the Doppler lidar with the range resolution is expected to bring several advantages over passive measurements. We have developed a new scanning 1.6μm DIAL and incoherent Doppler lidar system to perform simultaniously measurements of CO2 concentration and wind speed profiles in the atmosphere. The 1.6μm DIAL and Doppler lidar system consists of the Optical Parametric Generator (OPG) transmitter that excited by the LD pumped Nd:YAG laser with high repetition rate (500 Hz). The receiving optics include the near-infrared photomultiplier tube with high quantum efficiency operating at the photon counting mode, a fiber Bragg grating (FBG) filter to detct Doppler shift, and a 25 cm telescope[1][2]. Laser beam is transmitted coaxially and motorized scanning mirror system can scan the laser beam and field of view 0-360deg horizontally and 0-52deg vertically. We report the results of vertical CO2 scanning measurenents and vertical wind profiles. The scanning elevation angles were from 12deg to 24deg with angular step of 4deg and CO2 concentration profiles were obtained up to 1 km altitude with 200 m altitude resolution. We also obtained vertical wind vector profiles by measuring line-of-sight wind profiles at two azimuth angles with a fixed elevation angle 52deg. Vertical wind vector profiles were obtained up to 5 km altitude with 1 km altitude rasolution. This work was financially supported by the System Development Program for Advanced Measurement and Analysis of the Japan Science and Technology Agency. References [1] L. B. Vann, et al., "Narrowband fiber-optic phase-shifted Fabry-Perot Bragg grating filters for atmospheric water vapor lidar measurements", Appl. Opt., 44, pp. 7371-7377 (2005). [2] Y. Shibata, et al., "1.5μm incoherent Doppler lidar using a FBG filter", Proceedings

  4. A method for crack profiles identification in eddy current testing by the multi-directional scan

    International Nuclear Information System (INIS)

    Kojima, Fumio; Ikeda, Takuya; Nguyen, Doung

    2006-01-01

    This paper is concerned with a method for identification of crack shape in conducting materials. Multi-directional scanning strategies using Eddy Current Testing is performed for sizing complex natural crackings. Two dimensional measurements by means of multi-directional scan are used in a output least square identifications. (author)

  5. Reconstructing 3D profiles of flux distribution in array of unshunted Josephson junctions from 2D scanning SQUID microscope images

    International Nuclear Information System (INIS)

    Nascimento, F.M.; Sergeenkov, S.; Araujo-Moreira, F.M.

    2012-01-01

    By using a specially designed algorithm (based on utilizing the so-called Hierarchical Data Format), we report on successful reconstruction of 3D profiles of local flux distribution within artificially prepared arrays of unshunted Nb-AlO x -Nb Josephson junctions from 2D surface images obtained via the scanning SQUID microscope. The analysis of the obtained results suggest that for large sweep areas, the local flux distribution significantly deviates from the conventional picture and exhibits a more complicated avalanche-type behavior with a prominent dendritic structure. -- Highlights: ► The penetration of external magnetic field into an array of Nb-AlO x -Nb Josephson junctions is studied. ► Using Scanning SQUID Microscope, 2D images of local flux distribution within array are obtained. ► Using specially designed pattern recognition algorithm, 3D flux profiles are reconstructed from 2D images.

  6. The influence of lateral beam profile modifications in scanned proton and carbon ion therapy: a Monte Carlo study

    CERN Document Server

    Parodi, K; Kraemer, M; Sommerer, F; Naumann, J; Mairani, A; Brons, S

    2010-01-01

    Scanned ion beam delivery promises superior flexibility and accuracy for highly conformal tumour therapy in comparison to the usage of passive beam shaping systems. The attainable precision demands correct overlapping of the pencil-like beams which build up the entire dose distribution in the treatment field. In particular, improper dose application due to deviations of the lateral beam profiles from the nominal planning conditions must be prevented via appropriate beam monitoring in the beamline, prior to the entrance in the patient. To assess the necessary tolerance thresholds of the beam monitoring system at the Heidelberg Ion Beam Therapy Center, Germany, this study has investigated several worst-case scenarios for a sensitive treatment plan, namely scanned proton and carbon ion delivery to a small target volume at a shallow depth. Deviations from the nominal lateral beam profiles were simulated, which may occur because of misaligned elements or changes of the beam optic in the beamline. Data have been an...

  7. Thermal conductivity profile determination in proton-irradiated ZrC by spatial and frequency scanning thermal wave methods

    International Nuclear Information System (INIS)

    Jensen, C.; Chirtoc, M.; Horny, N.; Antoniow, J. S.; Pron, H.; Ban, H.

    2013-01-01

    Using complementary thermal wave methods, the irradiation damaged region of zirconium carbide (ZrC) is characterized by quantifiably profiling the thermophysical property degradation. The ZrC sample was irradiated by a 2.6 MeV proton beam at 600 °C to a dose of 1.75 displacements per atom. Spatial scanning techniques including scanning thermal microscopy (SThM), lock-in infrared thermography (lock-in IRT), and photothermal radiometry (PTR) were used to directly map the in-depth profile of thermal conductivity on a cross section of the ZrC sample. The advantages and limitations of each system are discussed and compared, finding consistent results from all techniques. SThM provides the best resolution finding a very uniform thermal conductivity envelope in the damaged region measuring ∼52 ± 2 μm deep. Frequency-based scanning PTR provides quantification of the thermal parameters of the sample using the SThM measured profile to provide validation of a heating model. Measured irradiated and virgin thermal conductivities are found to be 11.9 ± 0.5 W m −1 K −1 and 26.7 ±1 W m −1 K −1 , respectively. A thermal resistance evidenced in the frequency spectra of the PTR results was calculated to be (1.58 ± 0.1) × 10 −6 m 2 K W −1 . The measured thermal conductivity values compare well with the thermal conductivity extracted from the SThM calibrated signal and the spatially scanned PTR. Combined spatial and frequency scanning techniques are shown to provide a valuable, complementary combination for thermal property characterization of proton-irradiated ZrC. Such methodology could be useful for other studies of ion-irradiated materials

  8. Occupational health profile of workers employed in the manufacturing sector of India.

    Science.gov (United States)

    Suri, Shivali; Das, Ranjan

    2016-01-01

    The occupational health scenario of workers engaged in the manufacturing sector in India deserves attention for their safety and increasing productivity. We reviewed the status of the manufacturing sector, identified hazards faced by workers, and assessed the existing legislations and healthcare delivery mechanisms. From October 2014 to March 2015, we did a literature review by manual search of pre-identified journals, general electronic search, electronic search of dedicated websites/databases and personal communication with experts of occupational health. An estimated 115 million workers are engaged in the manufacturing sector, though the Labour Bureau takes into account only one-tenth of them who work in factories registered with the government. Most reports do not mention the human capital employed neither their quality of life, nor occupational health services available. The incidence of accidents were documented till 2011, and industry-wise break up of data is not available. Occupational hazards reported include hypertension, stress, liver disease, diabetes, tuberculosis, eye/ hearing problems, cancers, etc. We found no studies for manufacturing industries in glass, tobacco, computer and allied products, etc. The incidence of accidents is decreasing but the proportion of fatalities is increasing. Multiple legislations exist which cover occupational health, but most of these are old and have not been amended adequately to reflect the present situation. There is a shortage of manpower and occupational health statistics for dealing with surveillance, prevention and regulation in this sector. There is an urgent need of a modern occupational health legislation and an effective machinery to enforce it, preferably through intersectoral coordination between the Employees' State Insurance Corporation, factories and state governments. Occupational health should be integrated with the general health services.

  9. Dose profile in computed tomography chest scan; Perfil de dose em varredura de torax em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Bruno B., E-mail: bbo@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Pos-graduacao em Ciencias e Tecnologia das Radiacoes, Minerais e Materiais; Mourao, Arnaldo P. [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET/MG), Belo Horizonte, MG (Brazil); Alonso, Thessa C.; Silva, Teogenes A. da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2010-07-01

    For the optimization of the patient dose in computed tomography (CT), the Brazilian legislation only established the diagnostic reference levels (DRL's) in terms of Multiple Scan Average Dose (MSAD) in a typical adult as a parameter of quality control of CT scanners. Conformity to the DRL's can be verified by measuring the dose distribution in CT scans and MSAD determination. An analysis of the quality of CT scans of the metropolitan region of Belo Horizonte is necessary by conducting pertinent tests to the study that are presented in the ANVISA (National Agency of Sanitary Vigilance) Guide. The purpose of this study is to investigate, in a chest scan, the variation of dose in CT. To measure the dose profile are used lithium fluoride thermoluminescent dosimeters (TLD-100 Rod) distributed in cylinders positioned in peripheral and central regions of a phantom of polymethylmethacrylate (PMMA). The data obtained allow us to observe the variation of the dose profile inside the phantom. The peripheral region shows higher dose values than the central region. The longitudinal variation can be observed and the maximum dose was recorded at the edges of the phantom (41,58{+-}5,10) mGy at the midpoint of the longitudinal axis. The results will contribute to disseminate the proper procedure and optimize the dosimetry and the tests of quality control in CT, as well as make a critical analysis of the DRL's. (author)

  10. Dose profile study in head CT scans using a male anthropomorphic phantom

    International Nuclear Information System (INIS)

    Gomez, Alvaro M.L.; Santana, Priscila do C.; Mourao, Arnaldo P.

    2017-01-01

    Computed tomography (CT) test is an efficient and non-invasive method to obtain data about internal structures of the human body. CT scans contribute with the highest absorbed doses in population due X-ray beam attenuation and it has raised concern in radiosensitive tissues. Techniques for the optimization of CT scanning protocols in diagnostic services have been developing with the objective of decreasing the absorbed dose in the patient, aiming image quality within acceptable parameters for diagnosis by noise control. Routine head scans were performed using GE CT scan of 64 channels programmed with automatic exposure control and voltages of 80, 100 and 120 kV attaching the noise index in approximately 0.5%, using the tool of smart mA. An anthropomorphic adult male phantom was used and radiochromic film strips were placed to measure the absorbed dose deposited in areas such as the lens, thyroid and pituitary for study of dose deposited in these important areas containing high radiosensitive tissues. Different head scans were performed using optimized values of mA.s for the different voltages. The absorbed dose measured by the film strips were in the range of the 0.58 and 44.36 mGy. The analysis of noise in the images is within the acceptable levels for diagnosis, and the optimized protocol happens with the voltage of 100 kV. The use of other voltage values can allow obtain better protocols for head scans. (author)

  11. Software Application Profile: PHESANT: a tool for performing automated phenome scans in UK Biobank.

    Science.gov (United States)

    Millard, Louise A C; Davies, Neil M; Gaunt, Tom R; Davey Smith, George; Tilling, Kate

    2017-10-05

    Epidemiological cohorts typically contain a diverse set of phenotypes such that automation of phenome scans is non-trivial, because they require highly heterogeneous models. For this reason, phenome scans have to date tended to use a smaller homogeneous set of phenotypes that can be analysed in a consistent fashion. We present PHESANT (PHEnome Scan ANalysis Tool), a software package for performing comprehensive phenome scans in UK Biobank. PHESANT tests the association of a specified trait with all continuous, integer and categorical variables in UK Biobank, or a specified subset. PHESANT uses a novel rule-based algorithm to determine how to appropriately test each trait, then performs the analyses and produces plots and summary tables. The PHESANT phenome scan is implemented in R. PHESANT includes a novel Javascript D3.js visualization and accompanying Java code that converts the phenome scan results to the required JavaScript Object Notation (JSON) format. PHESANT is available on GitHub at [https://github.com/MRCIEU/PHESANT]. Git tag v0.5 corresponds to the version presented here. © The Author 2017. Published by Oxford University Press on behalf of the International Epidemiological Association.

  12. Dose profile study in head CT scans using a male anthropomorphic phantom

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Alvaro M.L.; Santana, Priscila do C.; Mourao, Arnaldo P., E-mail: amlgphys@gmail.com, E-mail: pridili@gmail.com, E-mail: apratabhz@gmail.com.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil). Departamento de Engenharia Nuclear; Centro Federal de Educação Tecnológica de Minas Gerais (CEFET-MG), Belo Horizonte, MG (Brazil)

    2017-11-01

    Computed tomography (CT) test is an efficient and non-invasive method to obtain data about internal structures of the human body. CT scans contribute with the highest absorbed doses in population due X-ray beam attenuation and it has raised concern in radiosensitive tissues. Techniques for the optimization of CT scanning protocols in diagnostic services have been developing with the objective of decreasing the absorbed dose in the patient, aiming image quality within acceptable parameters for diagnosis by noise control. Routine head scans were performed using GE CT scan of 64 channels programmed with automatic exposure control and voltages of 80, 100 and 120 kV attaching the noise index in approximately 0.5%, using the tool of smart mA. An anthropomorphic adult male phantom was used and radiochromic film strips were placed to measure the absorbed dose deposited in areas such as the lens, thyroid and pituitary for study of dose deposited in these important areas containing high radiosensitive tissues. Different head scans were performed using optimized values of mA.s for the different voltages. The absorbed dose measured by the film strips were in the range of the 0.58 and 44.36 mGy. The analysis of noise in the images is within the acceptable levels for diagnosis, and the optimized protocol happens with the voltage of 100 kV. The use of other voltage values can allow obtain better protocols for head scans. (author)

  13. Late-life deficits in cognitive, physical and emotional functions, childhood intelligence and occupational profile: a life-course examination of the Aberdeen 1936 Birth Cohort (ABC1936).

    Science.gov (United States)

    Chapko, Dorota; Staff, Roger T; McNeil, Christopher J; Whalley, Lawrence J; Black, Corri; Murray, Alison D

    2016-07-01

    the 'triad of impairment' phenomenon describes the co-occurrence of age-related cognitive, emotional and physical functioning deficits. We investigated how occupational profile and childhood intelligence contribute to the triad of impairment in late life. we analysed data of a subsample of the Aberdeen Birth Cohort of 1936 (n = 346). Data were collected on participants' childhood intelligence, late-life cognitive ability, physical functioning, depressive symptoms and main lifetime occupation. We summarised the various occupational and impairment measures into two latent variables, 'occupational profile' and the 'triad of impairment'. We used a series of data reduction approaches and structural equation models (SEMs) of increasing complexity to test both the validity of the models and to understand causal relationships between the life-course risks for the triad of impairment. occupational profile had a significant effect on the triad of impairment independent of childhood intelligence. Childhood intelligence was the predominant influence on the triad of impairment and exerted its effect directly and indirectly via its influence on occupation. The direct effect of childhood intelligence exceeded the independent influence of the occupational profile on impairment by a factor of 1.7-1.8 and was greater by a factor of ∼4 from the indirect pathway (via occupation). childhood intelligence was the predominant influence on the triad of impairment in late life, independently of the occupational profile. Efforts to reduce impairment in older adults should be informed by a life-course approach with special attention to the early-life environment. © The Author 2016. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Microgamma Scan System for analyzing radial isotopic profiles of irradiated transmutation fuels

    International Nuclear Information System (INIS)

    Hilton, Bruce A.; McGrath, Christopher A.

    2008-01-01

    The U. S. Global Nuclear Energy Partnership / Advanced Fuel Cycle Initiative (GNEP/AFCI) is developing metallic transmutation alloys as a fuel form to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products. A micro-gamma scan system is being developed to analyze the radial distribution of fission products, such as Cs-137, Cs-134, Ru-106, and Zr-95, in irradiated fuel cross-sections. The micro-gamma scan system consists of a precision linear stage with integrated sample holder and a tungsten alloy collimator, which interfaces with the Idaho National Laboratory (INL) Analytical Laboratory Hot Cell (ALHC) Gamma Scan System high purity germanium detector, multichannel analyzer, and removable collimators. A simplified model of the micro-gamma scan system was developed in MCNP (Monte-Carlo N-Particle Transport Code) and used to investigate the system performance and to interpret data from the scoping studies. Preliminary measurements of the micro-gamma scan system are discussed. (authors)

  15. Practical Correlation Analysis between Scan and Malware Profiles against Zero-Day Attacks Based on Darknet Monitoring

    Science.gov (United States)

    Nakao, Koji; Inoue, Daisuke; Eto, Masashi; Yoshioka, Katsunari

    Considering rapid increase of recent highly organized and sophisticated malwares, practical solutions for the countermeasures against malwares especially related to zero-day attacks should be effectively developed in an urgent manner. Several research activities have been already carried out focusing on statistic calculation of network events by means of global network sensors (so-called macroscopic approach) as well as on direct malware analysis such as code analysis (so-called microscopic approach). However, in the current research activities, it is not clear at all how to inter-correlate between network behaviors obtained from macroscopic approach and malware behaviors obtained from microscopic approach. In this paper, in one side, network behaviors observed from darknet are strictly analyzed to produce scan profiles, and in the other side, malware behaviors obtained from honeypots are correctly analyzed so as to produce a set of profiles containing malware characteristics. To this end, inter-relationship between above two types of profiles is practically discussed and studied so that frequently observed malwares behaviors can be finally identified in view of scan-malware chain.

  16. Older Women in Single Room Occupant (SRO) Hotels: A Seattle Profile.

    Science.gov (United States)

    Lally, Maureen; And Others

    1979-01-01

    Life histories and daily routines of women over the age of 55 living in Seattle single room occupant (SRO) hotels were studied using observational and interviewing methods. Residence in SRO's appears to be part of a natural life history progression for these women rather than a result of social pathology. (Author)

  17. A continuous OSL scanning method for analysis of radiation depth-dose profiles in bricks

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; Jungner, H.; Poolton, N.R.J.

    1995-01-01

    This article describes the development of a method for directly measuring radiation depth-dose profiles from brick, tile and porcelain cores, without the need for sample separation techniques. For the brick cores, examples are shown of the profiles generated by artificial irradiation using...... the different photon energies from Cs-137 and Co-60 gamma sources; comparison is drawn with both the theoretical calculations derived from Monte Carlo simulations, as well as experimental measurements made using more conventional optically stimulated luminescence methods of analysis....

  18. Profile of the subjects with soft tissue injuries attended at an occupational health service and the RSI

    Directory of Open Access Journals (Sweden)

    Camila de Freitas

    2015-07-01

    Full Text Available Aim: To investigate the profile of subjects with soft tissue injuries attended at the Reference Center of Occupational Health – CEREST in the municipality of Santos, Sao Paulo state, in 2010, and the social insurance benefits granted.Materials and Methods: Analysis of medical records of the subjects assisted at CEREST in 2010, surveying data on gender, age, occupation, clinical diagnostics, clinical complaints, retirement, etc. The clinical diagnostics were categorized according to the International Classification of Diseases - ICD-10, subjects with soft tissue injuries were selected, and the diagnostics related to mental health disorders were registered. Data were recorded in Microsoft Excel spreadsheet and analyzed using statistical software R Development Core Team.Results: Of the 206 medical records analyzed, 18.0% (n=37 showed soft tissue injuries, 81.1% were female and 18.9% were male, and the subjects’ mean age was 43.24 years (SD=8.76. Subjects between 31 and 50 years old (70.2% were the most affected. The most affected occupations were cleaners, general service workers, and bank clerks. The most prevalent clinical diagnoses were synovitis and tenosynovitis, shoulder bursitis, and rotator cuff syndrome, with 62.2% of the subjects presenting more than one clinical diagnosis. 13.5% of the subjects also presented mental disorders. Association between retirement from work and the presence of soft tissue injury was observed (p=0.032. Only 13.5% of the diagnoses had some association with the work conditions.Conclusions: The general profile of the workers with soft tissue injuries was obtained: prevalence in women, diseases manifested in productive age, difficulty of association with work conditions, need for interdisciplinary interventions.

  19. Novel Profiling Model and Side Effects of Helical Scan Silicon Heads

    NARCIS (Netherlands)

    Hozoi, A.; Groenland, J.P.J.; Albertini, J.B.; Lodder, J.C.

    2002-01-01

    Partial erasure of track edges was directly measured from triple-track patterns using a novel model to interpret the output profiles. The model is based on representing the read head as the sum of a reference width, wavelength independent, and two side reading effective widths that are wavelength

  20. Clinical profile and quality of life of patients with occupational contact dermatitis from New Delhi, India.

    Science.gov (United States)

    Bhatia, Riti; Sharma, Vinod K; Ramam, M; Sethuraman, Gomathy; Yadav, Chander P

    2015-09-01

    Data regarding occupational contact dermatitis (OCD) and its effect on quality of life (QOL) in India are limited. To evaluate patients with OCD and record the outcome of treatment. All patients with OCD were evaluated for severity of disease (by the use of physician global assessment) and its effect on QOL (by use of the Dermatology Life Quality Index) questionnaire) at the first visit and after 3 months of treatment. Among 117 patients with OCD, hand eczema was present in 81.2%. Positive patch test reactions were found in 76%. The most common allergens were Parthenium hysterophorus and potassium dichromate. The most frequent diagnosis was occupational allergic contact dermatitis (OACD) (57%), caused by farming and construction work, followed by occupational irritant contact dermatitis (OICD) (24%), caused by wet work. Severe psychosocial distress was recorded in 62.5% of patients. After 3 months of treatment, 83% improved significantly, and 54% had improvement in QOL. Farmers were most frequently affected, followed by construction workers and housewives. OACD was found at a higher frequency than OICD. The most frequent allergens were Parthenium hysterophorus in farmers, potassium dichromate in construction workers, and vegetables in housewives. OCD has a significant impact on QOL. Patch testing, in addition to standard treatment, improves the outcome considerably. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. Scanning Raman lidar for tropospheric water vapor profiling and GPS path delay correction

    Science.gov (United States)

    Tarniewicz, Jerome; Bock, Olivier; Pelon, Jacques R.; Thom, Christian

    2002-01-01

    The design of a ground based and transportable combined Raman elastic-backscatter lidar for the remote sensing of lower tropospheric water vapor and nitrogen concentration is described. This lidar is intended to be used for an external calibration of the wet path delay of GPS signals. A description of the method used to derive water vapor and nitrogen profiles in the lower troposphere is given. The instrument has been tested during the ESCOMPTE campaign in June 2001 and first measurements are presented.

  2. CONSTANCES: a general prospective population-based cohort for occupational and environmental epidemiology: cohort profile.

    Science.gov (United States)

    Goldberg, Marcel; Carton, Matthieu; Descatha, Alexis; Leclerc, Annette; Roquelaure, Yves; Santin, Gaëlle; Zins, Marie

    2017-01-01

    WHY THE COHORT WAS SET UP?: CONSTANCES is a general-purpose cohort with a focus on occupational and environmental factors. CONSTANCES was designed as a randomly selected sample of French adults aged 18-69 years at inception; 200 000 participants will be included. At enrolment, the participants are invited to complete questionnaires and to attend a health screening centre (HSC) for a health examination. A biobank will be set up. The follow-up includes an yearly self-administered questionnaire, a periodic visit to an HSC and linkage to social and national health administrative databases. Data collected for participants include social and demographic characteristics, socioeconomic status, life events and behaviours. Regarding occupational and environmental factors, a wealth of data on organisational, chemical, biological, biomechanical and psychosocial lifelong exposure, as well as residential characteristics, are collected at enrolment and during follow-up. The health data cover a wide spectrum: self-reported health scales, reported prevalent and incident diseases, long-term chronic diseases and hospitalisations, sick-leaves, handicaps, limitations, disabilities and injuries, healthcare usage and services provided, and causes of death. To take into account non-participation and attrition, a random cohort of non-participants was set up and will be followed through the same national databases as participants. Inclusions begun at the end of 2012 and more than 110 000 participants were already included by September 2016. Several projects on occupational and environmental risks already applied to a public call for nested research projects. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. Fast-scan monitor examines neutral-beam ion-density profile

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    All of the magnetic mirror confinement fusion experiments at LLL and at other laboratories depend on pulsed, energetic neutral-beam injection for fueling and imparting energy to the trapped plasma for density build-up and stability studies. It is vital to be able to monitor how well the injected ion beam is aimed and focused. To do this, we have designed an ion-beam current-density profile monitor that uses a commercial minimodular data acquisition system. Our prototype model monitors a single 20-kV, 50-A, 10-ms beam. However, the method is applicable to any number of beams with similar sampling target arrays. Also, the electronics can be switched to monitor any one of several target collectors

  4. Profile of Brazilian workers victims of occupational accidents with biological fluids.

    Science.gov (United States)

    Miranda, Fernanda Moura D'Almeida; Cruz, Elaine Drehmer de Almeida; Félix, Jorge Cestari Vinícius; Kalinke, Luciana Puchalski; Mantovani, Maria de Fátima; Sarquis, Leila Maria Mansano

    2017-01-01

    To characterize the Brazilian workers victims of occupational accidents with biological fluids. Epidemiological and descriptive research, in which 284,877 notifications of the Notifiable Diseases Information System were analyzed between 2007 and 2014. We used Stata 13 for data analysis. The highest incidence density occurred in females with 0.8 cases per 1,000 workers/year (n = 222,042, 77.9%); in the age group of 20 to 24 years old, with 0.6 cases per 1,000 workers/year (n = 64,221, 23.3%); with some high school and some college, with 0.6 cases per 1,000 workers/year (n = 141,275, 49.6%). We found that these accidents occurred among 23 occupational subgroups. For the most part, the workers had an employment relationship and had issued the Occupational Accident Notification. It is necessary to rethink the measures of orientation to workers regarding the risks and relative prophylaxis for these accidents, with the aim of reducing them. Caracterizar os trabalhadores brasileiros vítimas de acidente de trabalho com fluidos biológicos. Pesquisa epidemiológica, descritiva, na qual foram analisadas 284.877 notificações do Sistema Nacional de Notificação de Agravos, entre 2007 e 2014. Utilizou-se Stata 13 para a análise dos dados. A maior densidade de incidência ocorreu no sexo feminino com 0,8 caso a cada 1.000 trabalhadores/ano (n = 222.042; 77,9%); na faixa etária de 20 a 24 anos com 0,6 caso a cada 1.000 trabalhadores/ano (n = 64.221; 23,3%); com Ensino Médio e Superior incompleto com 0,6 caso a cada 1.000 trabalhadores/ano (n = 141.275; 49,6%). Verificou-se que esses acidentes ocorreram entre 23 subgrupos ocupacionais. Em sua maioria, os trabalhadores possuíam vínculo empregatício e tiveram emitida a Comunicação de Acidente de Trabalho. Faz-se necessário repensar as medidas de orientação aos trabalhadores quanto aos riscos e profilaxia relativa para estes acidentes, visando reduzi-los ou diminui-los.

  5. Polycrystalline silicon carbide dopant profiles obtained through a scanning nano-Schottky contact

    Energy Technology Data Exchange (ETDEWEB)

    Golt, M. C.; Strawhecker, K. E.; Bratcher, M. S. [U.S. Army Research Laboratory, WMRD, Aberdeen Proving Ground, Maryland 21005 (United States); Shanholtz, E. R. [ORISE, Belcamp, Maryland 21017 (United States)

    2016-07-14

    The unique thermo-electro-mechanical properties of polycrystalline silicon carbide (poly-SiC) make it a desirable candidate for structural and electronic materials for operation in extreme environments. Necessitated by the need to understand how processing additives influence poly-SiC structure and electrical properties, the distribution of lattice defects and impurities across a specimen of hot-pressed 6H poly-SiC processed with p-type additives was visualized with high spatial resolution using a conductive atomic force microscopy approach in which a contact forming a nano-Schottky interface is scanned across the sample. The results reveal very intricate structures within poly-SiC, with each grain having a complex core-rim structure. This complexity results from the influence the additives have on the evolution of the microstructure during processing. It was found that the highest conductivities localized at rims as well as at the interface between the rim and the core. The conductivity of the cores is less than the conductivity of the rims due to a lower concentration of dopant. Analysis of the observed conductivities and current-voltage curves is presented in the context of nano-Schottky contact regimes where the conventional understanding of charge transport to diode operation is no longer valid.

  6. Polycrystalline silicon carbide dopant profiles obtained through a scanning nano-Schottky contact

    International Nuclear Information System (INIS)

    Golt, M. C.; Strawhecker, K. E.; Bratcher, M. S.; Shanholtz, E. R.

    2016-01-01

    The unique thermo-electro-mechanical properties of polycrystalline silicon carbide (poly-SiC) make it a desirable candidate for structural and electronic materials for operation in extreme environments. Necessitated by the need to understand how processing additives influence poly-SiC structure and electrical properties, the distribution of lattice defects and impurities across a specimen of hot-pressed 6H poly-SiC processed with p-type additives was visualized with high spatial resolution using a conductive atomic force microscopy approach in which a contact forming a nano-Schottky interface is scanned across the sample. The results reveal very intricate structures within poly-SiC, with each grain having a complex core-rim structure. This complexity results from the influence the additives have on the evolution of the microstructure during processing. It was found that the highest conductivities localized at rims as well as at the interface between the rim and the core. The conductivity of the cores is less than the conductivity of the rims due to a lower concentration of dopant. Analysis of the observed conductivities and current-voltage curves is presented in the context of nano-Schottky contact regimes where the conventional understanding of charge transport to diode operation is no longer valid.

  7. Study of dose profile in TC scanning of cranium; Estudo do perfil de dose em varredura de TC de cranio

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves Junior, R.L.; Oliveira, A.H., E-mail: heeren@nuclear.ufmg.b [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte (Brazil). Dept. de Engenharia Nuclear; Mourao, A.P., E-mail: aprata@des.cefetmg.b [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte MG (Brazil). Nucleo de Engenharia Hospitalar

    2011-10-26

    In this paper it was obtained a dose distribution profile in computerized tomography, when a head simulator object, cylindrical and manufactured in PMMA, were swiped by using the clinical protocol or this device routine. The doses were determined with radiochromic films placed at the four cardinal points and the Center, taking as reference one of object faces. The films were calibrated with pencil ionization chamber in a independent experiment where the obtained doses in the chamber, when a unique central cut or the object were obtained, were confronted with the gray scales on the irradiated films in a similar manner, revealing he factors of conversion mGy.Gray tones{sup -1} which made possible the determination of doses in all the scanning

  8. A novel full-angle scanning light scattering profiler to quantitatively evaluate forward and backward light scattering from intraocular lenses

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Bennett N., E-mail: bennett.walker@fda.hhs.gov [Optical Therapeutics and Medical Nanophotonics Laboratory, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); Office of Device Evaluation, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); James, Robert H.; Ilev, Ilko K. [Optical Therapeutics and Medical Nanophotonics Laboratory, Office of Science and Engineering Laboratories, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States); Calogero, Don [Office of Device Evaluation, Center for Devices and Radiological Health, U.S. Food and Drug Administration, Silver Spring, Maryland 20993 (United States)

    2015-09-15

    Glare, glistenings, optical defects, dysphotopsia, and poor image quality are a few of the known deficiencies of intraocular lenses (IOLs). All of these optical phenomena are related to light scatter. However, the specific direction that light scatters makes a critical difference between debilitating glare and a slightly noticeable decrease in image quality. Consequently, quantifying the magnitude and direction of scattered light is essential to appropriately evaluate the safety and efficacy of IOLs. In this study, we introduce a full-angle scanning light scattering profiler (SLSP) as a novel approach capable of quantitatively evaluating the light scattering from IOLs with a nearly 360° view. The SLSP method can simulate in situ conditions by controlling the parameters of the light source including angle of incidence. This testing strategy will provide a more effective nonclinical approach for the evaluation of IOL light scatter.

  9. A novel full-angle scanning light scattering profiler to quantitatively evaluate forward and backward light scattering from intraocular lenses

    International Nuclear Information System (INIS)

    Walker, Bennett N.; James, Robert H.; Ilev, Ilko K.; Calogero, Don

    2015-01-01

    Glare, glistenings, optical defects, dysphotopsia, and poor image quality are a few of the known deficiencies of intraocular lenses (IOLs). All of these optical phenomena are related to light scatter. However, the specific direction that light scatters makes a critical difference between debilitating glare and a slightly noticeable decrease in image quality. Consequently, quantifying the magnitude and direction of scattered light is essential to appropriately evaluate the safety and efficacy of IOLs. In this study, we introduce a full-angle scanning light scattering profiler (SLSP) as a novel approach capable of quantitatively evaluating the light scattering from IOLs with a nearly 360° view. The SLSP method can simulate in situ conditions by controlling the parameters of the light source including angle of incidence. This testing strategy will provide a more effective nonclinical approach for the evaluation of IOL light scatter

  10. COMPREHENSIVE AND STRATEGIC PROFILE PERFORMANCE ASSESSMENT ON THE BASIS OCCUPATIONAL SKILLS TRANSTUR S.A. SANTIAGO

    Directory of Open Access Journals (Sweden)

    Marianela Bermejo-Salmón

    2016-01-01

    Full Text Available The essential purpose of this work is the design and application of the profile integrative and strategies of the performance evaluation based in labours competitions for the tetchiness A in the rent cars Transtur of Santiago de Cuba. For it were applied several methods and tetchiness such as: delphi method , holistic and integrated focus, experts judment, ishikawa diagram, surveys, acting observation, command tableriou, and technical computational among others. The achieved results allow to evaluate and characterizer of the profile evaluation performance from an approach integrative and strategies that is sustained in a theoretical conception- methodological and practice possibility the perfection of he Capital Humans of Gestation in the Branch. 

  11. Occupational Outcome in Adult ADHD: Impact of Symptom Profile, Comorbid Psychiatric Problems, and Treatment--A Cross-Sectional Study of 414 Clinically Diagnosed Adult ADHD Patients

    Science.gov (United States)

    Halmoy, Anne; Fasmer, Ole Bernt; Gillberg, Christopher; Haavik, Jan

    2009-01-01

    Objective: To determine the effects of symptom profile, comorbid psychiatric problems, and treatment on occupational outcome in adult ADHD patients. Method: Adult ADHD patients (N = 414) responded to questionnaires rating past and present symptoms of ADHD, comorbid conditions, treatment history, and work status. Results: Of the patients, 24%…

  12. Workers’ cytokines profiling upon exposure to MWCNT aerosol in occupational settings

    Science.gov (United States)

    Fatkhutdinova, L. M.; Khaliullin, T. O.; Zalyalov, R. R.; Vasilyeva, O. L.; Valeeva, I. Kh; Mustafin, I. G.

    2015-11-01

    Recent studies have found that upon pulmonary exposure to multi-walled carbon nanotubes (MWCNTs) animals develop primarily fibrosis and granulomas in lungs. In vitro and in vivo studies also give reason to assume that local exposure could be related to remote effects, including immune system and the endothelium. To investigate the remote effect hypothesis, we have analyzed blood, nasal lavage and induced sputum samples taken from workers in the frame of the Russian epidemiological study on Carbon Nanotubes Exposure and Risk Assessment (CNT-ERA). In serum and nasal lavage no significant differences between exposure and control groups were observed with a high variability to the cytokines content. In the samples of induced sputum from exposed workers the content of IL-1b, IL-6, IL-8, TNF-a, IL-4, IL-5, IFN-g exceeded the control group values, but after the regression models construction and bootstrap analysis, significant differences were found only for IL-1b. This study could not provide evidences of blood cytokines changes following local cytokine production in airways in workers exposed to MWCNTs. Cytokines variability in serum and nasal lavage may indicate the absence of severe systemic inflammatory response upon the existing occupational exposure to MWCNTs. Other systemic responses (including allergy-like or autoimmune reactions) should be regarded as well.

  13. IDENTIFIKASI PROFIL DASAR LAUT MENGGUNAKAN INSTRUMEN SIDE SCAN SONAR DENGAN METODE BEAM PATTERN DISCRETE-EQUI-SPACED UNSHADED LINE ARRAY

    Directory of Open Access Journals (Sweden)

    Muhammad Zainuddin Lubis

    2017-05-01

    Full Text Available Laut Punggur merupakan laut yang terletak di Batam, Kepulauan Riau yang mempunyai beragam habitat objek,dan bentuk struktur bawah laut yang memiliki dinamika laut yang sangat tinggi. Side scan sonar (SSS merupakan instrumen pengembangan sistem sonar yang mampu menunjukkan dalam gambar dua dimensional permukaan dasar laut dengan kondisi kontur, topografi, dan target secara bersamaan. Metode Beam Pattern Discrete-Equi-Spaced Unshaded Line Array digunakan untuk menghitung beam pattern dua dimensi yang tergantung pada sudut dari gelombang suara yang masuk dari sumbu array yang diterima tergantung pada sudut di mana sinar suara pada array. Penelitian ini dilakukan pada Desember 2016 di laut Punggur,Batam, Kepulauan Riau-Indonesia, dengan koordinat 104 ° 08,7102 E dan 1° 03,2448 N sampai 1 ° 03.3977 N dan 104 ° 08,8133 E, menggunakan instrumen Side Scan Sonar C-Max CM2 Tow fish dengan frekuensi 325 kHz. Hasil yang diperoleh dari perekaman terdapat 7 target, dan Beam pattern dari metode Beam Discrete-Equi-Spaced Unshaded Line Array target 4 memiliki nilai tertinggi pada directivity Pattern yaitu 21.08 dB. Hasil model beam pattern ini memiliki nilai pusat pada incidence angle (o terhadap Directivity pattern (dB tidak berada di nilai 0 ataupun pada pusat beam pattern yang dihasilkan pada target 6 dengan nilai incident angle -1.5 o dan 1.5o mengalami penurunan hingga -40 dB. Karakteristik sedimen dasar perairan di laut punggur ditemukan lebih banyak pasir. Hasil metode Beam Discrete-Equi-Spaced Unshaded Line Array ditemukan bangkai kapal tenggelam.Kata Kunci: Side Scan Sonar, Beam Pattern Discrete-Equi-Spaced Unshaded Line Array, Incidence angle, Directivity pattern IDENTIFICATION OF SEABED PROFILE USING SIDE SCAN SONAR INSTRUMENT WITH PATTERN DISCRETE-EQUI-SPACED UNSHADED LINE ARRAY METHODRiau Islands is an island that has a variety of habitat objects, and forms of submarine structures that have a very high ocean dynamics, Punggur Sea is the sea

  14. Dose profile study on computerized tomography scanning of skull with simulator object; Estudo do perfil de dose em varreduras de TC de cranio com objeto simulador

    Energy Technology Data Exchange (ETDEWEB)

    Mourao, A.P., E-mail: aprata@des.cefetmg.b [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET/MG), Belo Horizonte, MG (Brazil). Nucleo de Engenharia Hospitalar; Alonso, Thessa C.; Silva, Teogenes A. da, E-mail: alonso@cdtn.b, E-mail: silvata@@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-10-26

    This work presents a comparison among the dose profiles in scanning of computerized tomography of a simulator object of PMMA in its periphery region. To obtain the deposited dose at the PMMA thermoluminescent dosemeters were used positioned at the interior of PMMA simulated object longitudinal to periphery and at the center of cylinder (positions denominated North, South, East, West and Center). Eight scanning were performed of simulator object using the routine protocol for skull in eight different services of radiodiagnostic by TC

  15. Epidemiological and occupational profile of eye trauma at a referral center in Espírito Santo, Brazil

    Directory of Open Access Journals (Sweden)

    Miquele Milanez

    Full Text Available ABSTRACT Objective: To draw an epidemiological and occupational profile of eye trauma at a Brazilian referral center, make comparisons with the literature and provide subsidies for the adoption of adequate prevention and enforcement measures. Methods: Descriptive and prospective epidemiological study using a standardized questionnaire to collect data from 60 patients presenting with eye trauma at an ophthalmology service (HUCAM between 1 april 2013 and 1 october 2013. Results: The male gender was predominant (80%. Ages ranged from 8 to 60 years. Most accidents (56.7% occurred in the workplace, followed by the home (28.3%. Most injuries were closed, predominantly contusions, followed by foreign body on the external eye. Importantly, 82.9% of the victims of work-related trauma wore no eye protection at the time of the accident. Conclusions: Eye trauma in the workplace and elsewhere is an important problem of public health as it affects primarily the economically active population and may have serious consequences. A considerable proportion of eye trauma is easily avoidable by using personal protective equipment. To minimize the incidence of eye trauma, more attention should be given to instruction in and enforcement of the use of such equipment, supported by frequent prevention campaigns.

  16. A global analysis of protein expression profiles in Sinorhizobium meliloti: discovery of new genes for nodule occupancy and stress adaptation.

    Science.gov (United States)

    Djordjevic, Michael A; Chen, Han Cai; Natera, Siria; Van Noorden, Giel; Menzel, Christian; Taylor, Scott; Renard, Clotilde; Geiger, Otto; Weiller, Georg F

    2003-06-01

    A proteomic examination of Sinorhizobium meliloti strain 1021 was undertaken using a combination of 2-D gel electrophoresis, peptide mass fingerprinting, and bioinformatics. Our goal was to identify (i) putative symbiosis- or nutrient-stress-specific proteins, (ii) the biochemical pathways active under different conditions, (iii) potential new genes, and (iv) the extent of posttranslational modifications of S. meliloti proteins. In total, we identified the protein products of 810 genes (13.1% of the genome's coding capacity). The 810 genes generated 1,180 gene products, with chromosomal genes accounting for 78% of the gene products identified (18.8% of the chromosome's coding capacity). The activity of 53 metabolic pathways was inferred from bioinformatic analysis of proteins with assigned Enzyme Commission numbers. Of the remaining proteins that did not encode enzymes, ABC-type transporters composed 12.7% and regulatory proteins 3.4% of the total. Proteins with up to seven transmembrane domains were identified in membrane preparations. A total of 27 putative nodule-specific proteins and 35 nutrient-stress-specific proteins were identified and used as a basis to define genes and describe processes occurring in S. meliloti cells in nodules and under stress. Several nodule proteins from the plant host were present in the nodule bacteria preparations. We also identified seven potentially novel proteins not predicted from the DNA sequence. Post-translational modifications such as N-terminal processing could be inferred from the data. The posttranslational addition of UMP to the key regulator of nitrogen metabolism, PII, was demonstrated. This work demonstrates the utility of combining mass spectrometry with protein arraying or separation techniques to identify candidate genes involved in important biological processes and niche occupations that may be intransigent to other methods of gene expression profiling.

  17. Cytokine expression and cytokine-based T-cell profiling in occupational medicamentosa-like dermatitis due to trichloroethylene.

    Science.gov (United States)

    Xueqin, Yang; Wenxue, Li; Peimao, Li; Wen, Zhang; Xianqing, Huang; Zhixiong, Zhuang

    2018-05-15

    Early diagnosis and treatment of occupational medicamentosa-like dermatitis due to trichloroethylene (OMLDT) are absence of specific and reliable diagnostic/therapeutic biomarkers. This study was conducted on 30 cases of OMLDT, 58 workers exposed to trichloroethylene (TCE) and 40 unexposed controls in order to identify any cytokine signatures that give an index to CD4 + T cell differential and serve as biomarkers of OMLDT. Expression profiles of Th 1 , Th 2 , Th 17 and Treg cell type-specifying transcription factors and cytokines were analyzed using real time quantitative PCR (RT-qPCR) assay. To explore whether such expression profiles reflected their steady state plasma levels, a Luminex liquid fluorescence analysis was conducted. We found that the expression of transcription factors FoxP3 transcription factors (P = 0.006 and P < 0.0001) and IL-10 cytokine (P = 0.0008 and P < 0.0001) of the Treg subset were significantly higher in patients than TCE exposure workers and unexposed controls, suggesting that Treg cells were active after the occurrence of OMLDT. The transcript levels of IL-6 were significantly lower in the TCE exposure groups including patients and exposure workers as compared to the unexposed controls (P < 0.0001 and P = 0.0008). Circulating levels of assessed cytokines of IL-6 (P = 0.001 and P = 0.011) and TFN-α (P = 0.005 and P < 0.0001) were lower in the exposure groups than in the unexposed controls. Compared to the controls, the levels of IL-10 in patients were higher (P = 0.001 and P = 0.0008). There was a significantly positive correlation between the plasma levels IL-6 and IL-10 in TCE exposed workers. These alterations in the expression of transcription factors and cytokines highlight the underlying dysregulation of T cell subsets in OMLDT that reflect an immune tolerance or immune inhibition. Therefore, the elevation of IL-10 level may be a kind of pathogenesis indicator, and the decline in IL

  18. Concept and development of measurement method of time sensitivity profile (TSP) in X-ray CT. Comparison of non-helical, single-slice helical, and multi-slice helical scans

    International Nuclear Information System (INIS)

    Tsujioka, Katsumi; Ida, Yoshihiro; Ohtsubo, Hironori; Takahashi, Yasukata; Niwa, Masayoshi

    2000-01-01

    We focused on the time element contained in a single CT image, and devised the concept of a time-sensitivity profile (TSP) describing how the time element is translated into an image. We calculated the data collection time range when the helical pitch is changed in non helical scans, single slice helical scans, and multi slice helical scans. We then calculated the time sensitivity profile (TSP) from the weighting applied when the data collection time range is translated into an image. TSP was also measured for each scanning method using our self-made moving phantom. TSPs obtained from the calculation and the experiments were very close. TSP showed interesting characteristics with each scanning method, especially in the case of multi slice helical scanning, in which TSP became shorter as helical pitch increased. We referred to the TSP's FWHM as the effective scanning time. When we conducted multi slice helical scanning at helical pitch 3, the effective scanning time increased to about 24% longer than that of a non helical scan. When we conducted multi slice helical scanning at helical pitch 5 or 6, the effective scanning time was about half that of a non helical scan. The time sensitivity profile (TSP) is a totally new concept that we consider an important element in discussing the time resolution of a CT scanner. The results of this review will provide significant data in determining the scanning parameters when scanning a moving object. (author)

  19. Proteomic profiling of occupational medicamentosa-like dermatitis induced by trichloroethylene in serum based on MALDI-TOF MS.

    Science.gov (United States)

    Liu, Wei; Hong, Wen-Xu; Zhang, Yanfang; Huang, Peiwu; Yang, Xifei; Ren, Xiaohu; Huang, Haiyan; Liu, Jianjun

    2015-11-01

    Trichloroethylene (TCE) has long been well known as a major pollutant that affects both occupational and general environments. Occupational medicamentosa-like dermatitis induced by TCE (OMLDT) is an autoimmune disease, which has become one of the critical occupational health issues in China. In this study, we analyzed 18 OMLDT patients and 29 professional TCE contact people on serum proteomic analysis by matrix-assisted laser desorption ionization time-of-flight mass spectrometry and ClinProTools bioinformatics software. The intensities of 35 protein/peptide peaks were significantly different between TCE contact controls and OMLDT patients. A pattern of six peaks (m/z 1,450.33, 1,866.16, 3,262.39, 4,109.55, 5,064.85 and 5,956.57) were selected to construct a diagnostic model to discriminate the OMLDT patients from controls with sensitivity and specificity of both 93.8 %. Our findings provide an alternative proteomic approach to differentiate the OMLDT patients from TCE contact workers with high sensitivity and high specificity, which will be of potential value in clinical diagnosis for occupational disease.

  20. Cohort profile: LIFEWORK, a prospective cohort study on occupational and environmental risk factors and health in the Netherlands.

    NARCIS (Netherlands)

    Reedijk, M.; Lenters, V.; Slottje, P.; Pijpe, A.; Peeters, P.H.; Korevaar, J.C.; Bueno-de-Mesquita, B.; Verschuren, W.M.M.; Verheij, R.A.; Pieterson, I.; Leeuwen, F.E. van; Rookus, M.A.; Kromhout, H.; Vermeulen, R.C.H.

    2017-01-01

    Purpose LIFEWORK is a large federated prospective cohort established in the Netherlands to quantify the health effects of occupational and environmental exposures. This cohort is also the Dutch contribution to the international Cohort Study of Mobile Phone Use and Health (COSMOS). In this paper, we

  1. Occupational Clusters.

    Science.gov (United States)

    Pottawattamie County School System, Council Bluffs, IA.

    The 15 occupational clusters (transportation, fine arts and humanities, communications and media, personal service occupations, construction, hospitality and recreation, health occupations, marine science occupations, consumer and homemaking-related occupations, agribusiness and natural resources, environment, public service, business and office…

  2. μtrack profiles for investigating side effects of advanced silicon heads for helical scan tape systems

    NARCIS (Netherlands)

    Hozoi, A.; Groenland, J.P.J.; Lodder, J.C.; Albertini, J.B.

    2002-01-01

    Track and μtrack scans are common techniques in hard disk systems for investigating side writing and side reading, and for characterizing the response of MR read heads. These methods are implemented less in tape systems, where the contact recording mode and flexible medium make it difficult to

  3. Cohort profile: LIFEWORK, a prospective cohort study on occupational and environmental risk factors and health in the Netherlands.

    Science.gov (United States)

    Reedijk, Marije; Lenters, Virissa; Slottje, Pauline; Pijpe, Anouk; Peeters, Petra H; Korevaar, Joke C; Bueno-de-Mesquita, Bas; Verschuren, W M Monique; Verheij, Robert A; Pieterson, Inka; van Leeuwen, Flora E; Rookus, Matti A; Kromhout, Hans; Vermeulen, Roel C H

    2018-02-03

    LIFEWORK is a large federated prospective cohort established in the Netherlands to quantify the health effects of occupational and environmental exposures. This cohort is also the Dutch contribution to the international Cohort Study of Mobile Phone Use and Health (COSMOS). In this paper, we describe the study design, ongoing data collection, baseline characteristics of participants and the repeatability of key questionnaire items. 88 466 participants were enrolled in three cohort studies in 2011-2012. Exposure information was collected by a harmonised core questionnaire, or modelled based on occupational and residential histories; domains include air pollution (eg, nitrogen dioxide (NO 2 ), particulate matter with diameter ≤2.5 µm (PM 2.5 )), noise, electromagnetic fields (EMF), mobile phone use, shift work and occupational chemical exposures. Chronic and subacute health outcomes are assessed by self-report and through linkage with health registries. Participants had a median age of 51 years at baseline (range 19-87), and the majority are female (90%), with nurses being over-represented. Median exposure levels of NO 2 , PM 2.5 , EMF from base stations and noise at the participants' home addresses at baseline were 22.9 µg/m 3 , 16.6 µg/m 3 , 0.003 mWm 2 and 53.1 dB, respectively. Twenty-two per cent of participants reported to have started using a mobile phone more than 10 years prior to baseline. Repeatability for self-reported exposures was moderate to high (weighted kappa range: 0.69-1) for a subset of participants (n=237) who completed the questionnaire twice. We are actively and passively observing participants; we plan to administer a follow-up questionnaire every 4-5 years-the first follow-up will be completed in 2018-and linkage to cause-of-death and cancer registries occurs on a (bi)annual basis. This prospective cohort offers a unique, large and rich resource for research on contemporary occupational and environmental health risks and will

  4. Profiles

    International Nuclear Information System (INIS)

    2004-01-01

    Profiles is a synthetic overview of more than 100 national energy markets in the world, providing insightful facts and key energy statistics. A Profile is structured around 6 main items and completed by key statistics: Ministries, public agencies, energy policy are concerned; main companies in the oil, gas, electricity and coal sectors, status, shareholders; reserve, production, imports and exports, electricity and refining capacities; deregulation of prices, subsidies, taxes; consumption trends by sector, energy market shares; main energy projects, production and consumption prospects. Statistical Profiles are present in about 3 pages the main data and indicators on oil, gas, coal and electricity. (A.L.B.)

  5. Nurse occupational burnout and patient-rated quality of care: The boundary conditions of emotional intelligence and demographic profiles.

    Science.gov (United States)

    Chao, Minston; Shih, Chih-Ting; Hsu, Shu-Fen

    2016-01-01

    Most previous studies on the relationship between occupational burnout and the quality of care among nurses have used self-reported data on the quality of care from nurses, thus rendering evaluating the relationship between burnout and the quality of care difficult. Hospitals increasingly hire contract nurses and high turnover rates remain a concern. Little is known about whether nurses' emotional intelligence and demographic factors such as contract status, tenure, and marital status affect the quality of care when burnout occurs. This study investigated the relationship between burnout and patient-rated quality of care and investigated the moderating role of emotional intelligence and demographic variables. Hierarchical moderated regression was used to analyze 98 sets of paired data obtained from nurses and their patients at a teaching hospital in northern Taiwan. The results suggest that occupational burnout has a less unfavorable effect on the quality of care from permanent, married, and senior nurses. Nursing management should pay particular attention to retaining permanent, married, and senior nurses. To ensure a sustainable nursing workforce in the future, newly graduated registered nurses should have access to permanent positions and opportunities for long-term professional development. In addition, married nurses should be provided with flexible work-family arrangements to ensure their satisfaction in the nursing profession. © 2015 Japan Academy of Nursing Science.

  6. Possibilities of LA-ICP-MS technique for the spatial elemental analysis of the recent fish scales: Line scan vs. depth profiling

    International Nuclear Information System (INIS)

    Hola, Marketa; Kalvoda, Jiri; Novakova, Hana; Skoda, Radek; Kanicky, Viktor

    2011-01-01

    LA-ICP-MS and solution based ICP-MS in combination with electron microprobe are presented as a method for the determination of the elemental spatial distribution in fish scales which represent an example of a heterogeneous layered bone structure. Two different LA-ICP-MS techniques were tested on recent common carp (Cyprinus carpio) scales: (a)A line scan through the whole fish scale perpendicular to the growth rings. The ablation crater of 55 μm width and 50 μm depth allowed analysis of the elemental distribution in the external layer. Suitable ablation conditions providing a deeper ablation crater gave average values from the external HAP layer and the collagen basal plate. (b)Depth profiling using spot analysis was tested in fish scales for the first time. Spot analysis allows information to be obtained about the depth profile of the elements at the selected position on the sample. The combination of all mentioned laser ablation techniques provides complete information about the elemental distribution in the fish scale samples. The results were compared with the solution based ICP-MS and EMP analyses. The fact that the results of depth profiling are in a good agreement both with EMP and PIXE results and, with the assumed ways of incorporation of the studied elements in the HAP structure, suggests a very good potential for this method.

  7. Possibilities of LA-ICP-MS technique for the spatial elemental analysis of the recent fish scales: Line scan vs. depth profiling

    Energy Technology Data Exchange (ETDEWEB)

    Hola, Marketa [Department of Chemistry, Masaryk University of Brno, Kamenice 5, 625 00 Brno (Czech Republic); Kalvoda, Jiri, E-mail: jkalvoda@centrum.cz [Department of Geological Sciences, Masaryk University of Brno, Kotlarska 2, 611 37 Brno (Czech Republic); Novakova, Hana [Department of Chemistry, Masaryk University of Brno, Kamenice 5, 625 00 Brno (Czech Republic); Skoda, Radek [Department of Geological Sciences, Masaryk University of Brno, Kotlarska 2, 611 37 Brno (Czech Republic); Kanicky, Viktor [Department of Chemistry, Masaryk University of Brno, Kamenice 5, 625 00 Brno (Czech Republic)

    2011-01-01

    LA-ICP-MS and solution based ICP-MS in combination with electron microprobe are presented as a method for the determination of the elemental spatial distribution in fish scales which represent an example of a heterogeneous layered bone structure. Two different LA-ICP-MS techniques were tested on recent common carp (Cyprinus carpio) scales: (a)A line scan through the whole fish scale perpendicular to the growth rings. The ablation crater of 55 {mu}m width and 50 {mu}m depth allowed analysis of the elemental distribution in the external layer. Suitable ablation conditions providing a deeper ablation crater gave average values from the external HAP layer and the collagen basal plate. (b)Depth profiling using spot analysis was tested in fish scales for the first time. Spot analysis allows information to be obtained about the depth profile of the elements at the selected position on the sample. The combination of all mentioned laser ablation techniques provides complete information about the elemental distribution in the fish scale samples. The results were compared with the solution based ICP-MS and EMP analyses. The fact that the results of depth profiling are in a good agreement both with EMP and PIXE results and, with the assumed ways of incorporation of the studied elements in the HAP structure, suggests a very good potential for this method.

  8. Scanning spreading resistance microscopy (SSRM) 2d carrier profiling for ultra-shallow junction characterization in deep-submicron technologies

    International Nuclear Information System (INIS)

    Eyben, P.; Janssens, T.; Vandervorst, W.

    2005-01-01

    This work presents the recent progress in SSRM capabilities highlighting simultaneous performances in terms of sensitivity (<10%), spatial resolution (1-3 nm), dopant gradient resolution (1-2 nm/decade) and quantification accuracy (20-30%). The latter is illustrated through the analysis of different carrier profiling applications, i.e. the calibration of process simulations for a 90 nm n-MOS technology, the determination of the impact of nitridation on the lateral diffusion in a 40 nm n-MOS technology, the study of activation and diffusion problems in SPER-anneals of shallow implants, the observation of stress-induced diffusion mechanisms in the vicinity of shallow trench isolations (STI) and the study of diffusion and mobility mechanisms in SiGe MOS structures. Favorable comparisons with SCM and STM are also presented and do illustrate the unique capability of the SSRM technique

  9. Absolute determination of thyroid activity from profile scans. Description of a correction method for extra-thyroidal activity of the neck. , pt. 2

    International Nuclear Information System (INIS)

    Damme, K.J. van

    1977-01-01

    An absolute method to measure the uptake of radioactive iodide by the thyroid by making a profile scan across the thyroid region with a slit-collimated detector is described. It is well known that the extra-thyroidal activity (ETA) in the neck may constitute a severe hindrance to measure the uptake accurately, especially in cases of hypothyroidism and often during the first few hours after the administration of the traces dose (e.g. orally 0.5 μCiNa 131 I). The author's approach to the problem is presented. A practical application of the method is discussed in extenso. A comparative evaluation of the usability of 123 I and 131 I as least-burdening radionuclides for child patients is given at the end

  10. Chronic Electromagnetic Exposure at Occupational Safety Level Does Not Affect the Metabolic Profile nor Cornea Healing after LASIK Surgery

    Directory of Open Access Journals (Sweden)

    David Crouzier

    2014-01-01

    Full Text Available LASIK eye surgery has become a very common practice for myopic people, especially those in the military. Sometimes undertaken by people who need to keep a specific medical aptitude, this surgery could be performed in secret from the hierarchy and from the institute medical staff. However, even though the eyes have been previously described as one of the most sensitive organs to electromagnetic fields in the human body, no data exist on the potential deleterious effects of electromagnetic fields on the healing eye. The consequences of chronic long-lasting radar exposures at power density, in accordance with the occupational safety standards (9.71 GHz, 50 W/m2, were investigated on cornea healing. The metabolic and clinical statuses after experimental LASIK keratotomy were assessed on the different eye segments in a New Zealand rabbit model. The analysis methods were performed after 5 months of exposure (1 hour/day, 3 times/week. Neither clinical or histological examinations, nor experimental data, such as light scattering, 1H-NMR HRMAS metabolomics, 13C-NMR spectra of lipidic extracts, and antioxidant status, evidenced significant modifications. It was concluded that withdrawing the medical aptitude of people working in electromagnetic field environments (i.e., radar operators in the navy after eye surgery was not justified.

  11. The Internet and Computer User Profile: a questionnaire for determining intervention targets in occupational therapy at mental health vocational centers.

    Science.gov (United States)

    Regev, Sivan; Hadas-Lidor, Noami; Rosenberg, Limor

    2016-08-01

    In this study, the assessment tool "Internet and Computer User Profile" questionnaire (ICUP) is presented and validated. It was developed in order to gather information for setting intervention goals to meet current demands. Sixty-eight subjects aged 23-68 participated in the study. The study group (n = 28) was sampled from two vocational centers. The control group consisted of 40 participants from the general population that were sampled by convenience sampling based on the demographics of the study group. Subjects from both groups answered the ICUP questionnaire. Subjects of the study group answered the General Self- Efficacy (GSE) questionnaire and performed the Assessment of Computer Task Performance (ACTP) test in order to examine the convergent validity of the ICUP. Twenty subjects from both groups retook the ICUP questionnaire in order to obtain test-retest results. Differences between groups were tested using multiple analysis of variance (MANOVA) tests. Pearson and Spearman's tests were used for calculating correlations. Cronbach's alpha coefficient and k equivalent were used to assess internal consistency. The results indicate that the questionnaire is valid and reliable. They emphasize that the layout of the ICUP items facilitates in making a comprehensive examination of the client's perception regarding his participation in computer and internet activities. Implications for Rehabiliation The assessment tool "Internet and Computer User Profile" (ICUP) questionnaire is a novel assessment tool that evaluates operative use and individual perception of computer activities. The questionnaire is valid and reliable for use with participants of vocational centers dealing with mental illness. It is essential to facilitate access to computers for people with mental illnesses, seeing that they express similar interest in computers and internet as people from the general population of the same age. Early intervention will be particularly effective for young

  12. Estimating forest structural characteristics using the airborne LiDAR scanning system and a near-real time profiling laser system

    Science.gov (United States)

    Zhao, Kaiguang

    airborne scanning or profiling laser systems for remotely measuring various forest structural attributes at a range of scales, i.e., from individual tree, plot, stand and up to regional levels. The system not only provides a regional assessment tool, one that can be used to repeatedly, remotely measure hundreds or thousands of square kilometers with little/no analyst interaction or interpretation, but also serves as a paradigm for future efforts in building more advanced airborne laser systems such as real-time laser scanners.

  13. Occupational cancer

    International Nuclear Information System (INIS)

    Alderson, M.

    1986-01-01

    This book aims to review the occurrence and causes of occupational cancer and is aimed at assisting medical and safety staff, management and health and safety representatives. It is presented in the following chapters: 1) Epidemiological method 2) Agents causing occupationally induced cancer, including radiation 3) Occupations associated with risk of cancer 4) Aetiology of cancer 5) Control of occupationally induced cancer, research, prevention, legislation, national and international bodies, control of specific occupational carcinogens, including irradiation. (U.K.)

  14. Nuclear Scans

    Science.gov (United States)

    Nuclear scans use radioactive substances to see structures and functions inside your body. They use a special ... images. Most scans take 20 to 45 minutes. Nuclear scans can help doctors diagnose many conditions, including ...

  15. Depth, temperature, oxygen and salinity profile data from repetitive occupation of a hydrographic station off St. George's, Bermuda from 1954 through 1984 (NODC Accession 0000650)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CTD, bottle, and other data were collected from the PANULIRUS and other platforms from repetitive occupations of a hydrographic station off St. George's, Bermuda....

  16. Renal scan

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003790.htm Renal scan To use the sharing features on this ... anaphylaxis . Alternative Names Renogram; Kidney scan Images Kidney anatomy Kidney - blood and urine flow References Chernecky CC, ...

  17. CT Scan

    Science.gov (United States)

    ... disease, lung nodules and liver masses Monitor the effectiveness of certain treatments, such as cancer treatment Detect ... scan done in a hospital or an outpatient facility. CT scans are painless and, with newer machines, ...

  18. Radiochromic film use to record dose profile variations in chest CT scan; Utilizacao do filme radiocromico para registro da variacao do perfil de dose em varredura de TC de torax

    Energy Technology Data Exchange (ETDEWEB)

    Mourao, Arnaldo P.; Santana, Priscila C., E-mail: aprata@des.cefetmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Silva, Teogenes A. da; Alonso, Thessa C. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-12-15

    The CT scans generate higher doses in patients than those caused by other types of diagnostic radiology using the attenuation of X-ray beams. Technological advances have increased the clinical applications of computed tomography (CT) and consequently the demand for these exams. Dose reduction strategies are difficult to implement because of a lack of proper guidance on the CT scanning. However, CT offers the possibility of adjusting the image acquisition parameters according to the patient physical profile and the diagnostic application for which it is intended to scan. Knowledge of the dose distribution is important when thinking about varying the acquisition parameters to reduce the dose. In this work was used a PMMA chest phantom to observe the dose deposition in 5 areas. Radiochromic film strips were placed inside the chest phantom, in peripheral and in the central region. The phantom was placed in the scanner isocenter and it was performed the irradiation of its central region using a chest acquisition protocol. After the phantom CT scan the radiochromic film strips were processed for obtaining digital images. Digital images were reworked to obtain the dose variation profiles for each position. The results showed a wide variation in absorbed dose by the phantom, either within a same position along the length of the film strip, as in the comparison among the five regions which the strips are placed. In this second case the dose variations were even greater. (author)

  19. Occupational rhinitis.

    Science.gov (United States)

    Petrick, Maria M; Slavin, Raymond G

    2003-05-01

    This article aims to define occupational rhinitis, classify its various causes, review the steps in its diagnosis, and describe its nonpharmacologic and pharmacologic principles of management. Occupational rhinitis frequently coexists with asthma but also occurs alone. Although it does not have the same impact as occupational asthma, occupational rhinitis causes distress, discomfort, and work inefficiency. By concentrating on the patient's workplace, the clinician has an opportunity to practice preventive medicine: to recognize substances in the patient's micro- and macroenvironment that are causing the problems and then to intervene by altering the environment or removing the patient from the environment.

  20. The investigation of the impacts of major disasters, on the basis of the Van earthquake (October 23, 2011, Turkey), on the profile of the injuries due to occupational accidents.

    Science.gov (United States)

    Hekimoglu, Yavuz; Dursun, Recep; Karadas, Sevdegul; Asirdizer, Mahmut

    2015-10-01

    The purpose of this study is to identify the impacts of major disasters, on the basis of the Van earthquake (October 23, 2011, Turkey), on the profile of the injuries due to occupational accidents. In this study, we evaluated 245 patients of occupational accidents who were admitted to emergency services of Van city hospitals in the 1-year periods including pre-earthquake and post-earthquake. We determined that there was a 63.4% (P accidents in the post-earthquake period compared to the pre-earthquake period. Also, injuries due to occupational accidents increased 211% (P accidents. In this study, the impact of disasters such as earthquakes on the accidents at work was evaluated as we have not seen in literature. This study emphasizes that governments should make regulations and process relating to the post-disaster business before the emergence of disaster by taking into account factors that may increase their work-related accidents. Copyright © 2015 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  1. Perfil epidemiológico de las enfermedades profesionales en Alicante, 2002-2005 Epidemiological profile of occupational diseases in Alicante, 2002-2005

    Directory of Open Access Journals (Sweden)

    Senén Berenguer-Ortuño

    2009-03-01

    Full Text Available Objetivo: Describir el patrón epidemiológico de las enfermedades profesionales (EEPP en la provincia de Alicante entre los años 2002-2005. Métodos: Estudio transversal. La fuente de información procede de los partes del registro de EEPP notificadas en Alicante. Las enfermedades incluidas han sido los trastornos musculoesqueléticos (TME del miembro superior, dermatitis y asma. Como factores laborales y personales se han considerado la edad, el sexo, el puesto de trabajo, el tamaño de la empresa, y la antigüedad laboral. Se han estimado las tasas de incidencia utilizando los datos de población ocupada de la provincia, así como las razones de incidencia con los intervalos de confianza al 95% (IC 95% para las distintas variables consideradas. Resultados: Se registraron 645 casos de EEPP, de éstas 607 corresponden a las patologías seleccionadas con una incidencia de 22,67 casos por 100.000 trabajadores. 525 son TME del miembro superior, 68 dermatitis y 14 de asma. Conclusiones: Los TME del miembro superior representan en la provincia de Alicante la principal EEPP declarada. Se observan diferencias entre los tres grupos de EEPP en Alicante entre 2002-2005, según sexo, edad, actividad económica de la empresa y antigüedad en el puesto de trabajo.Objective: Describe the epidemiological pattern of the occupational diseases in the province of Alicante between 2002-2005. Methods: Cross-sectional study. The source of information comes from the reports of the occupational diseases registration notified in Alicante 2002-2005. The diseases have been included upper limb musculoskeletal disorders (UL-MSD, dermatitis and asthma. As working and personal factors have been considered age, sex, occupation, firm size and length of employment. The incidence rates were estimated, using workers report of Alicante, and the reasons for incidence with the confidence intervals yours (CI 95% for the different variables considered. Results: 645 cases of

  2. Cooperative scans

    NARCIS (Netherlands)

    M. Zukowski (Marcin); P.A. Boncz (Peter); M.L. Kersten (Martin)

    2004-01-01

    textabstractData mining, information retrieval and other application areas exhibit a query load with multiple concurrent queries touching a large fraction of a relation. This leads to individual query plans based on a table scan or large index scan. The implementation of this access path in most

  3. Radionuclide scanning

    International Nuclear Information System (INIS)

    Shapiro, B.

    1986-01-01

    Radionuclide scanning is the production of images of normal and diseased tissues and organs by means of the gamma-ray emissions from radiopharmaceutical agents having specific distributions in the body. The gamma rays are detected at the body surface by a variety of instruments that convert the invisible rays into visible patterns representing the distribution of the radionuclide in the body. The patterns, or images, obtained can be interpreted to provide or to aid diagnoses, to follow the course of disease, and to monitor the management of various illnesses. Scanning is a sensitive technique, but its specificity may be low when interpreted alone. To be used most successfully, radionuclide scanning must be interpreted in conjunction with other techniques, such as bone radiographs with bone scans, chest radiographs with lung scans, and ultrasonic studies with thyroid scans. Interpretation is also enhanced by providing pertinent clinical information because the distribution of radiopharmaceutical agents can be altered by drugs and by various procedures besides physiologic and pathologic conditions. Discussion of the patient with the radionuclide scanning specialist prior to the study and review of the results with that specialist after the study are beneficial

  4. Occupational Health

    Science.gov (United States)

    Occupational health problems occur at work or because of the kind of work you do. These problems can include ... by exposure to radiation Exposure to germs in health care settings Good job safety and prevention practices ...

  5. Occupational cancer

    International Nuclear Information System (INIS)

    Choril, A.C.; McCracken, W.J.; Dowd, E.C.; Stewart, Charles; Burton, D.F.; Dyer, D.W.

    1981-01-01

    This paper reviews the experience of the Workmen's Compensation Board of Ontario in identifying cases of cancer that could be attributed to occupational hazards. Workers' claims for compensation are allowed if there is reasonable medical evidence that their cancer was caused by exposure to risk factors associated with their occupation. Details of the types of cancers associated with specific carcinogens or fields of employment are discussed. About 50% of the cases were related to exposure in particular industrial operations that functioned for relatively brief periods. The number of deaths from cancer identified as being caused by occupational factors is compared with the total for cancer from all causes in Ontario during the period 1971 through 1975. Although all workers eligible for compensation may not have been identified, the data suggest that less than 1% is presently caused by occupational factors

  6. Occupational Cancer

    Science.gov (United States)

    ... November 3, 2015 Content source: National Institute for Occupational Safety and Health Division of Surveillance, Hazard Evaluations, and Field Studies ... Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 ...

  7. Occupational health

    CERN Document Server

    Fingret, Dr Ann

    2013-01-01

    Offers a comprehensive view of health and safety issues at work. An invaluable resource for managers, personnel professionals and occupational health practitioners. Recommended by the Institute of Personnel Management.

  8. Occupational cancer

    International Nuclear Information System (INIS)

    Nelson, N.

    1987-01-01

    Cancer resulting from occupational exposure is now receiving major attention, focusing on identification, regulation, and control of cancer-causing agents. Such cancer can result from exposure to chemicals and ionizing and nonionizing radiation. Extended exposure (often years) and an extended latent period of perhaps decades may intervene before tumor appearance. Although the actual extent of occupational cancer is in debate, estimates have ranged from 4 to 15 per cent of all cancer

  9. Occupational health

    OpenAIRE

    Coosemans, R.

    1997-01-01

    Health at work and healthy work environments are among the most valuable assets of individuals, communities and countries. Nowadays, new broader approach is promoted, recognizing the fact that occupational health is a key, but not a unique element of workers’ health. Workers health is a public health approach to resolving the health problems of working populations including all determinants of health recognized as targets of risk management. It focuses on primary prevention of occupational an...

  10. Quantitative analysis of organizational culture in occupational health research: a theory-based validation in 30 workplaces of the organizational culture profile instrument

    Science.gov (United States)

    2013-01-01

    Background This study advances a measurement approach for the study of organizational culture in population-based occupational health research, and tests how different organizational culture types are associated with psychological distress, depression, emotional exhaustion, and well-being. Methods Data were collected over a sample of 1,164 employees nested in 30 workplaces. Employees completed the 26-item OCP instrument. Psychological distress was measured with the General Health Questionnaire (12-item); depression with the Beck Depression Inventory (21-item); and emotional exhaustion with five items from the Maslach Burnout Inventory general survey. Exploratory factor analysis evaluated the dimensionality of the OCP scale. Multilevel regression models estimated workplace-level variations, and the contribution of organizational culture factors to mental health and well-being after controlling for gender, age, and living with a partner. Results Exploratory factor analysis of OCP items revealed four factors explaining about 75% of the variance, and supported the structure of the Competing Values Framework. Factors were labeled Group, Hierarchical, Rational and Developmental. Cronbach’s alphas were high (0.82-0.89). Multilevel regression analysis suggested that the four culture types varied significantly between workplaces, and correlated with mental health and well-being outcomes. The Group culture type best distinguished between workplaces and had the strongest associations with the outcomes. Conclusions This study provides strong support for the use of the OCP scale for measuring organizational culture in population-based occupational health research in a way that is consistent with the Competing Values Framework. The Group organizational culture needs to be considered as a relevant factor in occupational health studies. PMID:23642223

  11. Quantitative analysis of organizational culture in occupational health research: a theory-based validation in 30 workplaces of the organizational culture profile instrument.

    Science.gov (United States)

    Marchand, Alain; Haines, Victor Y; Dextras-Gauthier, Julie

    2013-05-04

    This study advances a measurement approach for the study of organizational culture in population-based occupational health research, and tests how different organizational culture types are associated with psychological distress, depression, emotional exhaustion, and well-being. Data were collected over a sample of 1,164 employees nested in 30 workplaces. Employees completed the 26-item OCP instrument. Psychological distress was measured with the General Health Questionnaire (12-item); depression with the Beck Depression Inventory (21-item); and emotional exhaustion with five items from the Maslach Burnout Inventory general survey. Exploratory factor analysis evaluated the dimensionality of the OCP scale. Multilevel regression models estimated workplace-level variations, and the contribution of organizational culture factors to mental health and well-being after controlling for gender, age, and living with a partner. Exploratory factor analysis of OCP items revealed four factors explaining about 75% of the variance, and supported the structure of the Competing Values Framework. Factors were labeled Group, Hierarchical, Rational and Developmental. Cronbach's alphas were high (0.82-0.89). Multilevel regression analysis suggested that the four culture types varied significantly between workplaces, and correlated with mental health and well-being outcomes. The Group culture type best distinguished between workplaces and had the strongest associations with the outcomes. This study provides strong support for the use of the OCP scale for measuring organizational culture in population-based occupational health research in a way that is consistent with the Competing Values Framework. The Group organizational culture needs to be considered as a relevant factor in occupational health studies.

  12. Global Profiling and Novel Structure Discovery Using Multiple Neutral Loss/Precursor Ion Scanning Combined with Substructure Recognition and Statistical Analysis (MNPSS): Characterization of Terpene-Conjugated Curcuminoids in Curcuma longa as a Case Study.

    Science.gov (United States)

    Qiao, Xue; Lin, Xiong-hao; Ji, Shuai; Zhang, Zheng-xiang; Bo, Tao; Guo, De-an; Ye, Min

    2016-01-05

    To fully understand the chemical diversity of an herbal medicine is challenging. In this work, we describe a new approach to globally profile and discover novel compounds from an herbal extract using multiple neutral loss/precursor ion scanning combined with substructure recognition and statistical analysis. Turmeric (the rhizomes of Curcuma longa L.) was used as an example. This approach consists of three steps: (i) multiple neutral loss/precursor ion scanning to obtain substructure information; (ii) targeted identification of new compounds by extracted ion current and substructure recognition; and (iii) untargeted identification using total ion current and multivariate statistical analysis to discover novel structures. Using this approach, 846 terpecurcumins (terpene-conjugated curcuminoids) were discovered from turmeric, including a number of potentially novel compounds. Furthermore, two unprecedented compounds (terpecurcumins X and Y) were purified, and their structures were identified by NMR spectroscopy. This study extended the application of mass spectrometry to global profiling of natural products in herbal medicines and could help chemists to rapidly discover novel compounds from a complex matrix.

  13. Multi-target retrieval (MTR): the simultaneous retrieval of pressure, temperature and volume mixing ratio profiles from limb-scanning atmospheric measurements

    International Nuclear Information System (INIS)

    Dinelli, B.M.; Alpaslan, D.; Carlotti, M.; Magnani, L.; Ridolfi, M.

    2004-01-01

    In this paper we describe a retrieval approach for the simultaneous determination of the altitude distributions of p, T and VMR of atmospheric constituents from limb-scanning measurements of the atmosphere. This analysis method, named multi-target retrieval (MTR), has been designed and implemented in a computer code aimed at the analysis of MIPAS-ENVISAT observations; however, the concepts implemented in MTR have a general validity and can be extended to the analysis of all type of limb-scanning observations. In order to assess performance and advantages of the proposed approach, MTR has been compared with the sequential analysis system implemented by ESA as the level-2 processor for MIPAS measurements. The comparison has been performed on a common set of target species and spectral intervals. The performed tests have shown that MTR produces results of better quality than a sequential retrieval. However, the simultaneous retrieval of p, T and water VMR has not lead to satisfactory results below the tropopause, because of the high correlation occurring between p and water VMR in the troposphere. We have shown that this problem can be fixed extending the MTR analysis to at least one further target whose spectral features decouple the retrieval of pressure and water VMR. Ozone was found to be a suitable target for this purpose. The advantages of the MTR analysis system in terms of systematic errors have also been discussed

  14. Mudanças recentes no perfil da distribuição ocupacional da população brasileira Recent changes in the profile of occupational distribution of the Brazilian population

    Directory of Open Access Journals (Sweden)

    Anita Kon

    2006-12-01

    Full Text Available Este estudo visou contribuir com subsídios para a análise das transformações recentes no perfil da estruturação do trabalhador brasileiro, segundo a segmentação setorial e em grupos específicos de ocupações, particularmente na década de 90. Foram examinadas inicialmente questões teóricas sobre as causas da segmentação do mercado de trabalho na atualidade. Em seqüência, analisaram-se aspectos empíricos relacionados às mudanças estruturais da distribuição no mercado de trabalho em economias mundiais, procurando situar o Brasil neste contexto internacional. Para o Brasil, foram elaborados Índices de Estruturação Ocupacional e de Quocientes de Diferenciação Regional. Os resultados da análise mostram que, apesar de transformações ocupacionais significativas constatadas, as mudanças estruturais foram intra e não inter-regionais.This article analyzes recent changes in the profile of the Brazilian labor structure, according to sector segmentation and specific occupational groups, especially during the 1990s. Theoretical aspects on the causes of the segmentation of the labor market are first examined. Empirical information related to structural changes in labor markets in the worldwide economy are then discussed, in order to locate Brazil in this context. Specifically, Indexes of Occupational Structure and Regional Difference Quotients for Brazil were drawn up. The results show that, besides significant occupational transformations, structural changes occurred in the regions, but not among them.

  15. Analysis of a Novel Diffractive Scanning-Wire Beam Position Monitor (BPM) for Discriminative Profiling of Electron Vs. X Ray Beams

    International Nuclear Information System (INIS)

    Tatchyn, R.

    2011-01-01

    Recent numerical studies of Free Electron Lasers (FELs) operating in the Self Amplified Spontaneous Emission (SASE) regime indicate a large sensitivity of the gain to the degree of transverse overlap (and associated phase coherence) between the electron and photon beams traveling down the insertion device. Simulations of actual systems imply that accurate detection and correction for this relative loss of overlap, rather than correction for the absolute departure of the electron beam from a fixed axis, is the preferred function of an FEL amplifier's Beam Position Monitor (BPM) and corrector systems. In this note we propose a novel diffractive BPM with the capability of simultaneously detecting and resolving the absolute (and relative) transverse positions and profiles of electron and x-ray beams co-propagating through an undulator. We derive the equations governing the performance of the BPM and examine its predicted performance for the SLAC Linac Coherent Light Source (LCLS), viz., for profiling multi-GeV electron bunches co-propagating with one-to-several-hundred keV x-ray beams. Selected research and development (r and d) tasks for fabricating and testing the proposed BPM are discussed.

  16. Technical Note: Scanning of parallel-plate ionization chamber and diamond detector for measurements of water-dose profiles in the vicinity of a narrow x-ray microbeam.

    Science.gov (United States)

    Nariyama, Nobuteru

    2017-12-01

    Scanning of dosimeters facilitates dose distribution measurements with fine spatial resolutions. This paper presents a method of conversion of the scanning results to water-dose profiles and provides an experimental verification. An Advanced Markus chamber and a diamond detector were scanned at a resolution of 6 μm near the beam edges during irradiation with a 25-μm-wide white narrow x-ray beam from a synchrotron radiation source. For comparison, GafChromic films HD-810 and HD-V2 were also irradiated. The conversion procedure for the water dose values was simulated with Monte Carlo photon-electron transport code as a function of the x-ray incidence position. This method was deduced from nonstandard beam reference-dosimetry protocols used for high-energy x-rays. Among the calculated nonstandard beam correction factors, P wall , which is the ratio of the absorbed dose in the sensitive volume of the chamber with water wall to that with a polymethyl methacrylate wall, was found to be the most influential correction factor in most conditions. The total correction factor ranged from 1.7 to 2.7 for the Advanced Markus chamber and from 1.15 to 1.86 for the diamond detector as a function of the x-ray incidence position. The water dose values obtained with the Advanced Markus chamber and the HD-810 film were in agreement in the vicinity of the beam, within 35% and 18% for the upper and lower sides of the beam respectively. The beam width obtained from the diamond detector was greater, and the doses out of the beam were smaller than the doses of the others. The comparison between the Advanced Markus chamber and HD-810 revealed that the dose obtained with the scanned chamber could be converted to the water dose around the beam by applying nonstandard beam reference-dosimetry protocols. © 2017 American Association of Physicists in Medicine.

  17. Scanning table

    CERN Multimedia

    1960-01-01

    Before the invention of wire chambers, particles tracks were analysed on scanning tables like this one. Today, the process is electronic and much faster. Bubble chamber film - currently available - (links can be found below) was used for this analysis of the particle tracks.

  18. Scan Statistics

    CERN Document Server

    Glaz, Joseph

    2009-01-01

    Suitable for graduate students and researchers in applied probability and statistics, as well as for scientists in biology, computer science, pharmaceutical science and medicine, this title brings together a collection of chapters illustrating the depth and diversity of theory, methods and applications in the area of scan statistics.

  19. Occupational risk of building construction

    International Nuclear Information System (INIS)

    Aneziris, O.N.; Topali, E.; Papazoglou, I.A.

    2012-01-01

    This paper presents the quantification of occupational risk of a building construction project. Risk assessment is based on the Occupational Risk Model (ORCA) developed under the Workgroup Occupational Risk Model project (WORM), in the Netherlands, for quantifying occupational risk. This model assesses occupational risk of a worker, by taking into account his various tasks, activities and their hazards. Risk is evaluated for three types of consequences: recoverable injury, permanent injury and death. The occupational risk model is based on a set of 63 bowties, which assess risk owing to different hazards such as fall from ladder, scaffold, roofs, falling object, struck by moving vehicle, contact by moving parts, etc. ORCA calculates the risk profile of a building construction site, consisting of thirty-eight workers in different job positions, such as operators of excavators, loaders, compaction equipment, workers in excavation and framing phases, etc. All risk profiles of workers have been quantified and jobs have been ranked according to their risk. Workers installing timber formworks have the highest fatality risk (1.57×10 −3 /yr), followed by the workers installing reinforcement (1.52×10 −3 /yr).

  20. Scanning holograms

    International Nuclear Information System (INIS)

    Natali, S.

    1984-01-01

    This chapter reports on the scanning of 1000 holograms taken in HOBC at CERN. Each hologram is triggered by an interaction in the chamber, the primary particles being pions at 340 GeV/c. The aim of the experiment is the study of charm production. The holograms, recorded on 50 mm film with the ''in line'' technique, can be analyzed by shining a parallel expanded laser beam through the film, obtaining immediately above it the real image of the chamber which can then be scanned and measured with a technique half way between emulsions and bubble chambers. The results indicate that holograms can be analyzed as quickly and reliably as in other visual techniques and that to them is open the same order of magnitude of large scale experiments

  1. Bone scans

    International Nuclear Information System (INIS)

    Hetherington, V.J.

    1989-01-01

    Oftentimes, in managing podiatric complaints, clinical and conventional radiographic techniques are insufficient in determining a patient's problem. This is especially true in the early stages of bone infection. Bone scanning or imaging can provide additional information in the diagnosis of the disorder. However, bone scans are not specific and must be correlated with clinical, radiographic, and laboratory evaluation. In other words, bone scanning does not provide the diagnosis but is an important bit of information aiding in the process of diagnosis. The more useful radionuclides in skeletal imaging are technetium phosphate complexes and gallium citrate. These compounds are administered intravenously and are detected at specific time intervals postinjection by a rectilinear scanner with minification is used and the entire skeleton can be imaged from head to toe. Minification allows visualization of the entire skeleton in a single image. A gamma camera can concentrate on an isolated area. However, it requires multiple views to complete the whole skeletal image. Recent advances have allowed computer augmentation of the data received from radionucleotide imaging. The purpose of this chapter is to present the current radionuclides clinically useful in podiatric patients

  2. Occupational hazards

    OpenAIRE

    Paz-Fuchs, Amir; Ronen, Yaël

    2012-01-01

    This article provides an analysis and a critique of the law governing the employment relationship between Israeli employers and Palestinian employees in industries operating in the West Bank. \\ud \\ud Through an analysis of Israeli jurisprudence it highlights the intersection among different areas of law: choice of law, public international law (in particular the law of occupation), and labor law. The article explores the tensions that this intersection creates: first, between the importance t...

  3. Occupation: nurse; occupational hazard: radiation

    International Nuclear Information System (INIS)

    Nickson, K.

    1984-01-01

    The work of the occupational health nurses at the Pickering Generating Station is described. A staff of two nurses teach first aid and safety, practice an emergency plan, and monitor personnel for minimum health standards for radiation workers. Special attention is paid to problems which might be aggravated by radiation, such as skin complaints, respiratory diseases, emotional stability, or phobias regarding heights, plastic suits, or radiation itself. Procedures used in treating contaminated personnel are outlined

  4. Occupation: nurse; occupational hazard: radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nickson, K

    1984-03-01

    The work of the occupational health nurses at the Pickering Generating Station is described. A staff of two nurses teach first aid and safety, practice an emergency plan, and monitor personnel for minimum health standards for radiation workers. Special attention is paid to problems which might be aggravated by radiation, such as skin complaints, respiratory diseases, emotional stability, or phobias regarding heights, plastic suits, or radiation itself. Procedures used in treating contaminated personnel are outlined.

  5. Priority Setting for Occupational Cancer Prevention

    Directory of Open Access Journals (Sweden)

    Cheryl E. Peters

    2018-06-01

    Full Text Available Background: Selecting priority occupational carcinogens is important for cancer prevention efforts; however, standardized selection methods are not available. The objective of this paper was to describe the methods used by CAREX Canada in 2015 to establish priorities for preventing occupational cancer, with a focus on exposure estimation and descriptive profiles. Methods: Four criteria were used in an expert assessment process to guide carcinogen prioritization: (1 the likelihood of presence and/or use in Canadian workplaces; (2 toxicity of the substance (strength of evidence for carcinogenicity and other health effects; (3 feasibility of producing a carcinogen profile and/or an occupational estimate; and (4 special interest from the public/scientific community. Carcinogens were ranked as high, medium or low priority based on specific conditions regarding these criteria, and stakeholder input was incorporated. Priorities were set separately for the creation of new carcinogen profiles and for new occupational exposure estimates. Results: Overall, 246 agents were reviewed for inclusion in the occupational priorities list. For carcinogen profile generation, 103 were prioritized (11 high, 33 medium, and 59 low priority, and 36 carcinogens were deemed priorities for occupational exposure estimation (13 high, 17 medium, and 6 low priority. Conclusion: Prioritizing and ranking occupational carcinogens is required for a variety of purposes, including research, resource allocation at different jurisdictional levels, calculations of occupational cancer burden, and planning of CAREX-type projects in different countries. This paper outlines how this process was achieved in Canada; this may provide a model for other countries and jurisdictions as a part of occupational cancer prevention efforts. Keywords: cancer prevention, carcinogen exposure, occupational health

  6. Scanning Color Laser Microscope

    Science.gov (United States)

    Awamura, D.; Ode, T.; Yonezawa, M.

    1988-01-01

    A confocal color laser microscope which utilizes a three color laser light source (Red: He-Ne, Green: Ar, Blue: Ar) has been developed and is finding useful applications in the semiconductor field. The color laser microscope, when compared to a conventional microscope, offers superior color separation, higher resolution, and sharper contrast. Recently some new functions including a Focus Scan Memory, a Surface Profile Measurement System, a Critical Dimension Measurement system (CD) and an Optical Beam Induced Current Function (OBIC) have been developed for the color laser microscope. This paper will discuss these new features.

  7. Occupational physiology

    CERN Document Server

    Toomingas, Allan; Tornqvist, Ewa Wigaeus

    2011-01-01

    In a clear and accessible presentation, Occupational Physiology focuses on important issues in the modern working world. Exploring major public health problems-such as musculoskeletal disorders and stress-this book explains connections between work, well-being, and health based on up-to-date research in the field. It provides useful methods for risk assessment and guidelines on arranging a good working life from the perspective of the working individual, the company, and society as a whole.The book focuses on common, stressful situations in different professions. Reviewing bodily demands and r

  8. Knowledge profiling the occupational therapy concept of occupation

    DEFF Research Database (Denmark)

    Thellefsen, Torkild Leo; Sørensen, Bent; Villemoes Sørensen, Lisbeth

    2012-01-01

    There exist two kinds of fundamental signs and significance-effects. A normative fundamental sign and a sub-cognitive fundamental sign; a normative significance-effect and a sub-cognitive significance-effect, also called quasi-empathy. The normative fundamental sign and significance-effect appear...

  9. Head CT scan

    Science.gov (United States)

    ... scan - orbits; CT scan - sinuses; Computed tomography - cranial; CAT scan - brain ... head size in children Changes in thinking or behavior Fainting Headache, when you have certain other signs ...

  10. Occupational skin cancer: Systematic review

    Directory of Open Access Journals (Sweden)

    Jéssica Suellen Sena

    2016-06-01

    Full Text Available SUMMARY Objective: To analyze the epidemiological profile, risk factors in the workplace environment and prevention methods for professionals at risk of skin cancer. Method: A systematic review of articles on occupational skin cancer, published in the Lilacs, Scielo, Medline and Cochrane Library from January 1st, 2008, to December 31st, 2013, was performed. The search included the following terms: “neoplasias cutâneas” (DeCS, “exposição ocupacional” (DeCS, “epidemiologia” (DeCS as well as the keyword “prevenção”, and their equivalents in English. Results: After analyzing the titles and summaries of articles, the search strategy resulted in 83 references, of which 22 articles met the eligibility criteria. Discussion: We found that sun exposure is the main occupational risk factor for skin cancer, causing outdoor workers to be the most vulnerable to developing occupational skin cancer. Professionals with low levels of education and European descent are at increased risk of developing this cancer. Conclusion: Outdoor workers are more vulnerable to developing occupational skin cancer, estimating that professionals with low level of education and European descent are at increased risk of developing this cancer. Therefore, companies need to invest more in the health of workers by providing protective equipment and thus preventing occupational skin cancer.

  11. Overview of the low energy accelerator scanning system

    International Nuclear Information System (INIS)

    Leo Kwee Wah; Lojius Lombigit; Muhamad Zahidee Taat; Abu Bakar Ghazali; Mohd Rizal Ibrahim; Mohd Rizal Chulan Md Chulan; Azaman Ahmad; Abdul Halim Baijan; Rokiah Mohd Sabri

    2009-01-01

    This paper describes the specification of the low energy accelerator (Baby-EBM; Electron Beam Machine) scanning system. It comprises a discussion of coil inductance measurement, power supply design and the test results. The scanning horn system was completely assembled and tested; it was found that the system is able to scan the beam across the scanning window with a required beam profile. (Author)

  12. Occupational Profiles in the European Steel Industry.

    Science.gov (United States)

    Franz, Hans-Werner; And Others

    The steel industry in Europe has faced great changes, with resulting layoffs and restructuring. Now that the most basic changes seem to be over, it has become evident that the remaining steel industry requires more highly trained workers than was the case previously. Although steel maintenance employees were always highly skilled, steel production…

  13. Brain PET scan

    Science.gov (United States)

    ... results on a PET scan. Blood sugar or insulin levels may affect the test results in people with diabetes . PET scans may be done along with a CT scan. This combination scan is called a PET/CT. Alternative Names Brain positron emission tomography; PET scan - brain References Chernecky ...

  14. Heart PET scan

    Science.gov (United States)

    ... nuclear medicine scan; Heart positron emission tomography; Myocardial PET scan ... A PET scan requires a small amount of radioactive material (tracer). This tracer is given through a vein (IV), ...

  15. Household electricity demand profiles

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Heiselberg, Per Kvols; Larsen, Olena Kalyanova

    2016-01-01

    Highlights •A 1-min resolution household electricity load model is presented. •Model adapts a bottom-up approach with single appliance as the main building block. •Load profiles are used to analyse the flexibility potential of household appliances. •Load profiles can be applied in other domains, .......g. building energy simulations. •The demand level of houses with different number of occupants is well captured....

  16. 78 FR 59983 - Submission for Review: OPM Form 1203-FX, Occupational Questionnaire, 3206-0040

    Science.gov (United States)

    2013-09-30

    ... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: OPM Form 1203-FX, Occupational Questionnaire... request (ICR) 3206-0040, Occupational Questionnaire, OPM Form 1203-FX. As required by the Paperwork.... SUPPLEMENTARY INFORMATION: The Occupational Questionnaire is an optical scan form designed to collect applicant...

  17. Occupational hearing loss

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/001048.htm Occupational hearing loss To use the sharing features on this page, please enable JavaScript. Occupational hearing loss is damage to the inner ear from noise ...

  18. Possibility of Predicting Serotonin Transporter Occupancy From the In Vitro Inhibition Constant for Serotonin Transporter, the Clinically Relevant Plasma Concentration of Unbound Drugs, and Their Profiles for Substrates of Transporters.

    Science.gov (United States)

    Yahata, Masahiro; Chiba, Koji; Watanabe, Takao; Sugiyama, Yuichi

    2017-09-01

    Accurate prediction of target occupancy facilitates central nervous system drug development. In this review, we discuss the predictability of serotonin transporter (SERT) occupancy in human brain estimated from in vitro K i values for human SERT and plasma concentrations of unbound drug (C u,plasma ), as well as the impact of drug transporters in the blood-brain barrier. First, the geometric means of in vitro K i values were compared with the means of in vivo K i values (K i,u,plasma ) which were calculated as C u,plasma values at 50% occupancy of SERT obtained from previous clinical positron emission tomography/single photon emission computed tomography imaging studies for 6 selective serotonin transporter reuptake inhibitors and 3 serotonin norepinephrine reuptake inhibitors. The in vitro K i values for 7 drugs were comparable to their in vivo K i,u,plasma values within 3-fold difference. SERT occupancy was overestimated for 5 drugs (P-glycoprotein substrates) and underestimated for 2 drugs (presumably uptake transporter substrates, although no evidence exists as yet). In conclusion, prediction of human SERT occupancy from in vitro K i values and C u,plasma was successful for drugs that are not transporter substrates and will become possible in future even for transporter substrates, once the transporter activities will be accurately estimated from in vitro experiments. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  19. Radiopharmaceutical scanning agents

    International Nuclear Information System (INIS)

    1976-01-01

    This invention is directed to dispersions useful in preparing radiopharmaceutical scanning agents, to technetium labelled dispersions, to methods for preparing such dispersions and to their use as scanning agents

  20. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Scan and Uptake Thyroid scan and uptake uses small amounts of radioactive materials called radiotracers, a special ... is a branch of medical imaging that uses small amounts of radioactive material to diagnose and determine ...

  1. Nuclear Heart Scan

    Science.gov (United States)

    ... Home / Nuclear Heart Scan Nuclear Heart Scan Also known as Nuclear Stress Test , ... Learn More Connect With Us Contact Us Directly Policies Privacy Policy Freedom of Information Act (FOIA) Accessibility ...

  2. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of page What will I experience during and after the procedure? Most thyroid scan and thyroid uptake ... you otherwise, you may resume your normal activities after your nuclear medicine scan. If any special instructions ...

  3. RBC nuclear scan

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003835.htm RBC nuclear scan To use the sharing features on this page, please enable JavaScript. An RBC nuclear scan uses small amounts of radioactive material to ...

  4. Scanning gamma camera

    International Nuclear Information System (INIS)

    Engdahl, L.W.; Batter, J.F. Jr.; Stout, K.J.

    1977-01-01

    A scanning system for a gamma camera providing for the overlapping of adjacent scan paths is described. A collimator mask having tapered edges provides for a graduated reduction in intensity of radiation received by a detector thereof, the reduction in intensity being graduated in a direction normal to the scanning path to provide a blending of images of adjacent scan paths. 31 claims, 15 figures

  5. Seismic scanning tunneling macroscope - Theory

    KAUST Repository

    Schuster, Gerard T.

    2012-09-01

    We propose a seismic scanning tunneling macroscope (SSTM) that can detect the presence of sub-wavelength scatterers in the near-field of either the source or the receivers. Analytic formulas for the time reverse mirror (TRM) profile associated with a single scatterer model show that the spatial resolution limit to be, unlike the Abbe limit of λ/2, independent of wavelength and linearly proportional to the source-scatterer separation as long as the point scatterer is in the near-field region; if the sub-wavelength scatterer is a spherical impedance discontinuity then the resolution will also be limited by the radius of the sphere. Therefore, superresolution imaging can be achieved as the scatterer approaches the source. This is analogous to an optical scanning tunneling microscope that has sub-wavelength resolution. Scaled to seismic frequencies, it is theoretically possible to extract 100 Hz information from 20 Hz data by imaging of near-field seismic energy.

  6. Seismic scanning tunneling macroscope - Theory

    KAUST Repository

    Schuster, Gerard T.; Hanafy, Sherif M.; Huang, Yunsong

    2012-01-01

    We propose a seismic scanning tunneling macroscope (SSTM) that can detect the presence of sub-wavelength scatterers in the near-field of either the source or the receivers. Analytic formulas for the time reverse mirror (TRM) profile associated with a single scatterer model show that the spatial resolution limit to be, unlike the Abbe limit of λ/2, independent of wavelength and linearly proportional to the source-scatterer separation as long as the point scatterer is in the near-field region; if the sub-wavelength scatterer is a spherical impedance discontinuity then the resolution will also be limited by the radius of the sphere. Therefore, superresolution imaging can be achieved as the scatterer approaches the source. This is analogous to an optical scanning tunneling microscope that has sub-wavelength resolution. Scaled to seismic frequencies, it is theoretically possible to extract 100 Hz information from 20 Hz data by imaging of near-field seismic energy.

  7. Inference for occupancy and occupancy dynamics

    Science.gov (United States)

    O'Connell, Allan F.; Bailey, Larissa L.; O'Connell, Allan F.; Nichols, James D.; Karanth, K. Ullas

    2011-01-01

    This chapter deals with the estimation of occupancy as a state variable to assess the status of, and track changes in, species distributions when sampling with camera traps. Much of the recent interest in occupancy estimation and modeling originated from the models developed by MacKenzie et al. (2002, 2003), although similar methods were developed independently (Azuma et al. 1990; Bayley and Petersen 2001; Nichols and Karanth, 2002; Tyre et al. 2003), all of which deal with species occurrence information and imperfect detection. Less than a decade after these publications, the modeling and estimation of species occurrence and occupancy dynamics have increased significantly. Special features of scientific journals have explored innovative uses of detection–nondetection data with occupancy models (Vojta 2005), and an entire volume has synthesized the use and application of occupancy estimation methods (MacKenzie et al. 2006). Reviews of the topical concepts, philosophical considerations, and various sampling designs that can be used for occupancy estimation are now readily available for a range of audiences (MacKenzie and Royle 2005; MacKenzie et al. 2006; Bailey et al. 2007; Royle and Dorazio 2008; Conroy and Carroll 2009; Kendall and White 2009; Hines et al. 2010; Link and Barker 2010). As a result, it would be pointless here to recast all that these publications have so eloquently articulated, but that said, a review of any scientific topic requires sufficient context and relevant background information, especially when relatively new methodologies and techniques such as occupancy estimation and camera traps are involved. This is especially critical in a digital age where new information is published at warp speed, making it increasingly difficult to stay abreast of theoretical advances and research developments.

  8. OCCUPATIONAL EXPOSURE AND COPD

    DEFF Research Database (Denmark)

    Würtz, Else Toft

    Chronic Obstructive Pulmonary Disease (COPD) is a common disease. The main risk factor is smoking although 15% of the COPD cases are expected to be preventable if the occupational exposures from vapour, gas, dust, and fume were eliminated; the population attributable fraction (PAF). The thesis...... addresses the association between occupational exposure and COPD in a population-based cohort of Danes aged 45-84-years. 4717 participants were included at baseline and 2624 at the four year follow-up. COPD was defined by spirometry and the occupational exposure was based on specialist defined jobs...... and questionnaires. The main occupational exposure was organic dust and 49% reported no lifetime occupational exposure. The results suggest occupational exposures to be associated to COPD also in never smokers and women. We found an exposure-response relation in the cross sectional analyses. The results...

  9. Acute hexogen poisoning after occupational exposure.

    Science.gov (United States)

    Testud, F; Glanclaude, J M; Descotes, J

    1996-01-01

    Hexogen (cyclonite, RDX) nitrate explosive is an infrequent cause of poisoning. A 42-year-old man with no prior history of epilepsy experienced grand mal seizures after sieving fine hexogen (RDX) powder for four hours in an ammunition plant. Physical examination was normal on arrival at the emergency room but recurrent seizures occurred six hour after admission. EEG, CT scan and MRI were normal and the patient recovered uneventfully. The available toxicological data on this rare occupational poisoning are reviewed.

  10. Electronics Technology. Tech Prep Competency Profile.

    Science.gov (United States)

    Lakeland Tech Prep Consortium, Kirtland, OH.

    This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

  11. Marketing occupational health care.

    Science.gov (United States)

    Norris, M J; Harris, J C

    1981-01-01

    A very basic part of marketing success is determining areas of your business in which you have a competitive advantage. In drafting a marketing plan for the Denver Clinic, the competitive advantages group practices have in the area of occupational health were quickly realized. This competitive edge is presented along with the Denver Clinic's marketing strategies and plans to capitalize on occupational healthcare advantages.

  12. The Heath Occupational Model.

    Science.gov (United States)

    Heath, William E.

    1990-01-01

    Career development programs must identify occupational needs of adults. A model based on Maslow's hierarchy develops occupational questions related to individual motivations (physiology, safety, love, esteem, and self-actualization). Individual needs are then compared with characteristics and benefits of proposed jobs, companies, or careers. (SK)

  13. Leadership and Occupational Stress

    Science.gov (United States)

    Stickle, Fred E.; Scott, Kelly

    2016-01-01

    In a leadership position, it is important to understand what stress is and how it affects others. In an occupational setting, stressors vary according to personality types, gender, and occupational rank. The purpose of this manuscript is to review the foundations of stress and to explore how personality characteristics influence stress.…

  14. Occupational Stress among Teachers.

    Science.gov (United States)

    Albertson, Larry M.; Kagan, Dona M.

    1987-01-01

    Two studies were conducted to investigate the degree to which occupational stress among teachers could be attributed to personal characteristics of the individuals themselves. The first study developed dispositional stress scales. The second examined correlations between these scales, occupational stress scales, and teachers' attitudes toward…

  15. CAUSES OF OCCUPATIONAL INJURIES

    NARCIS (Netherlands)

    KINGMA, J

    1994-01-01

    The causes of occupational injuries (N = 2,365) were investigated. Accidents with machinery and hand tools were the two main causes (49.9%). 89% of the patients with occupational injuries were male. The highest risk group were in the age category of 19 years or less (51.9%). This age group also

  16. Occupational stress among dentists

    DEFF Research Database (Denmark)

    Moore, Rod

    2011-01-01

    Dentists report a high degree of occupational stress.(Cooper, Mallinger, and Kahn, 1978;Coster, Carstens, and Harris, 1987;DiMatteo, Shugars, and Hays, 1993;Hakeberg et al., 1992;Möller and Spangenberg, 1996;Moore, 2000;Myers and Myers, 2004;O'Shea, Corah, and Ayer, 1984) This chapter reviews...... the literature of studies that elaborate on the circumstances of occupational stress of dentists. These will include the frequency of occurrence of occupational stress among dentists in several countries, frequency and intensity of identified stressors specific to dentistry, as well as the consequences...... of this occupational stress. The literature on consequences includes effects on dentists' physical health, personal and occupational performance, including "burnout" phenomena, as well as topics of alcohol or substance abuse and reports of suicidal behaviour among dentists. One specific and less conventionally...

  17. Occupational skin diseases

    DEFF Research Database (Denmark)

    Mahler, V; Aalto-Korte, K; Alfonso, J H

    2017-01-01

    BACKGROUND: Work-related skin diseases (WSD) are caused or worsened by a professional activity. Occupational skin diseases (OSD) need to fulfil additional legal criteria which differ from country to country. OSD range amongst the five most frequently notified occupational diseases (musculoskeletal...... diseases, neurologic diseases, lung diseases, diseases of the sensory organs, skin diseases) in Europe. OBJECTIVE: To retrieve information and compare the current state of national frameworks and pathways to manage patients with occupational skin disease with regard to prevention, diagnosis, treatment...... in Science and Technology (COST) Action TD 1206 (StanDerm) (www.standerm.eu). RESULTS: Besides a national health service or a statutory health insurance, most European member states implemented a second insurance scheme specifically geared at occupational diseases [insurance against occupational risks...

  18. Occupational medicine and toxicology

    Directory of Open Access Journals (Sweden)

    Fischer Axel

    2006-02-01

    Full Text Available Abstract This editorial is to announce the Journal of Occupational Medicine and Toxicology, a new Open Access, peer-reviewed, online journal published by BioMed Central. Occupational medicine and toxicology belong to the most wide ranging disciplines of all medical specialties. The field is devoted to the diagnosis, prevention, management and scientific analysis of diseases from the fields of occupational and environmental medicine and toxicology. It also covers the promotion of occupational and environmental health. The complexity of modern industrial processes has dramatically changed over the past years and today's areas include effects of atmospheric pollution, carcinogenesis, biological monitoring, ergonomics, epidemiology, product safety and health promotion. We hope that the launch of the Journal of Occupational Medicine and Toxicology will aid in the advance of these important areas of research bringing together multi-disciplinary research findings.

  19. Quantitative PET Imaging in Drug Development: Estimation of Target Occupancy.

    Science.gov (United States)

    Naganawa, Mika; Gallezot, Jean-Dominique; Rossano, Samantha; Carson, Richard E

    2017-12-11

    Positron emission tomography, an imaging tool using radiolabeled tracers in humans and preclinical species, has been widely used in recent years in drug development, particularly in the central nervous system. One important goal of PET in drug development is assessing the occupancy of various molecular targets (e.g., receptors, transporters, enzymes) by exogenous drugs. The current linear mathematical approaches used to determine occupancy using PET imaging experiments are presented. These algorithms use results from multiple regions with different target content in two scans, a baseline (pre-drug) scan and a post-drug scan. New mathematical estimation approaches to determine target occupancy, using maximum likelihood, are presented. A major challenge in these methods is the proper definition of the covariance matrix of the regional binding measures, accounting for different variance of the individual regional measures and their nonzero covariance, factors that have been ignored by conventional methods. The novel methods are compared to standard methods using simulation and real human occupancy data. The simulation data showed the expected reduction in variance and bias using the proper maximum likelihood methods, when the assumptions of the estimation method matched those in simulation. Between-method differences for data from human occupancy studies were less obvious, in part due to small dataset sizes. These maximum likelihood methods form the basis for development of improved PET covariance models, in order to minimize bias and variance in PET occupancy studies.

  20. The Occupations of Literacy: Occupational Therapy's Role

    Science.gov (United States)

    Frolek Clark, Gloria

    2016-01-01

    Nationally, student proficiency in reading and writing is very low and requires ongoing focus from state and local agencies. With almost 25% of occupational therapists working in early intervention and school settings (AOTA, 2015), their role of facilitating literacy (e.g., reading, writing, speaking and listening) is critical. Occupational…

  1. SPLC Sustainable Purchasing Guidance Profile

    Science.gov (United States)

    To help you find the resource that is right for your organization, EPA conducted a scan of the landscape and developed summary profiles of some of the leading sources of sustainable purchasing guidance around the globe.

  2. Lung PET scan

    Science.gov (United States)

    ... Chest PET scan; Lung positron emission tomography; PET - chest; PET - lung; PET - tumor imaging; ... Grainger & Allison's Diagnostic Radiology: A Textbook of Medical Imaging . 6th ed. Philadelphia, ...

  3. Scanning of bone metastases

    International Nuclear Information System (INIS)

    Robillard, J.

    1977-01-01

    The Centers against cancer of Caen, Angers, Montpellier, Strasbourg and 'the Curie Foundation' have confronted their experience in detection of bone metastases by total body scanning. From the investigation by this procedure, of 1,467 patients with cancer, it results: the confrontation between radio and scanning shows a rate of false positive and false negative identical to the literature ones; the countage scanning allows to reduce the number of false positive; scanning allows to direct bone biopsy and to improve efficiency of histological examination [fr

  4. Statistical Analysis and Modeling of Occupancy Patterns in Open-Plan Offices using Measured Lighting-Switch Data

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Wen-Kuei; Hong, Tianzhen

    2013-01-01

    Occupancy profile is one of the driving factors behind discrepancies between the measured and simulated energy consumption of buildings. The frequencies of occupants leaving their offices and the corresponding durations of absences have significant impact on energy use and the operational controls of buildings. This study used statistical methods to analyze the occupancy status, based on measured lighting-switch data in five-minute intervals, for a total of 200 open-plan (cubicle) offices. Five typical occupancy patterns were identified based on the average daily 24-hour profiles of the presence of occupants in their cubicles. These statistical patterns were represented by a one-square curve, a one-valley curve, a two-valley curve, a variable curve, and a flat curve. The key parameters that define the occupancy model are the average occupancy profile together with probability distributions of absence duration, and the number of times an occupant is absent from the cubicle. The statistical results also reveal that the number of absence occurrences decreases as total daily presence hours decrease, and the duration of absence from the cubicle decreases as the frequency of absence increases. The developed occupancy model captures the stochastic nature of occupants moving in and out of cubicles, and can be used to generate a more realistic occupancy schedule. This is crucial for improving the evaluation of the energy saving potential of occupancy based technologies and controls using building simulations. Finally, to demonstrate the use of the occupancy model, weekday occupant schedules were generated and discussed.

  5. Occupational skin cancers

    Energy Technology Data Exchange (ETDEWEB)

    Gawkrodger, D.J. [Royal Hallamshire Hospital, Sheffield (United Kingdom). Dept. of Dermatology

    2004-10-01

    Skin cancer due to occupation is more common than is generally recognized, although it is difficult to obtain an accurate estimate of its prevalence. Over the past two centuries, occupational skin cancers have particularly been due to industrial exposure of men (it seems more so than women) to chemical carcinogens such as polycyclic hydrocarbons (e.g. from coal tar products) or to arsenic. Industrial processes have improved in most Western countries to limit this type of exposure, but those with outdoor occupations are still exposed to solar ultraviolet irradiation without this being widely recognized as an industrial hazard. Ionizing radiation such as X-rays can also cause skin cancer. Occupational skin cancers often resemble skin tumours found in non-occupational subjects, e.g. basal cell carcinoma, squamous cell carcinoma and malignant melanoma, but some pre-malignant lesions can be more specific and point to an occupational origin, e.g. tar keratoses or arsenical keratoses. An uncommon but well-recognized cause of occupational skin cancer is that which results from scar formation following an industrial burn. In the future it will be necessary to focus on preventative measures, e.g. for outdoor workers, the need to cover up in the sun and use sun protective creams and a campaign for earlier recognition of skin cancers, which are usually curable if treated in their early stages.

  6. BURNOUT AND OCCUPATIONAL PARTICIPATION

    Science.gov (United States)

    Eren, Hakan; Huri, Meral; Bağış, Nilsun; Başıbüyük, Onur; Şahin, Sedef; Umaroğlu, Mutlu; Orhan, Kaan

    2016-11-01

    The aim of the present study was to investigate the prevalence of burnout and occupational participation limitation among dental students in a dental school in Turkey. Four hundred fifty-eight dental students (females=153; males=305) were included in the study. The age range varied from 17-to-38 years. Maslach Burnout Inventory-Student Version (MBI-SV) and Canadian Occupational Performance Measure (COPM) were used to gather data. Descriptive analyses, t-test, and Kruskall-Wallis test for independent groups were used for data analyses. The results indicated that 26% of all the students have burnout in terms of emotional exhaustion (25%), cynicism (18%), and academic efficacy (14%). The results showed that burnout is statistically significant in relation to demographics (pstudents showed considerably decreased occupational performance and satisfaction scores, which suggested occupational participation limitations. Occupational performance and satisfaction scores were inversely correlated with emotional exhaustion and cynicism, while directly correlated with reduced academic efficacy (pburnout and occupational participation limitation can be seen among dental students. Students with burnout may also have occupational participation limitation. Enriching dental education programs with different psychological strategies may be useful for education of healthy dentists and improve the quality of oral and dental health services.

  7. [Occupational injury, a public health priority].

    Science.gov (United States)

    Benavides, Fernando G; Delclos, Jordi; Benach, Joan; Serra, Consol

    2006-01-01

    The aim of this review is to stimulate new ideas and actions for the prevention of this important public health problem. In 2002 and 2003, respectively, the number of non-fatal occupational injuries was 971,406 and 906,638. Thus, every day in Spain there are more than 2500 non-fatal and between 2 and 3 fatal occupational injuries. Although the profile of the at-risk worker population has changed greatly over the past decade, both quantitatively and qualitatively, the risk of occupational injury still centers on blue collar workers, whether qualified or nonqualified, in the primary and secondary sectors of economic activity. The most common mechanisms of occupational injuries are overexertion for non-fatal injuries and traffic-related for fatal events. The adverse health consequences of new types of employment, which emphasize flexibility and deregulation of the labour market, are exemplified by the association between temporary employment and increased risk of occupational injury. New injury prevention programs have emerged in the last decade, but they appear to have had limited impact. Preventive activities should focus both on working conditions at the company level (micro) as well as on employment and industrial public policies (macro). Greater evaluation is needed of these latter policies.

  8. Model PET Scan Activity

    Science.gov (United States)

    Strunk, Amber; Gazdovich, Jennifer; Redouté, Oriane; Reverte, Juan Manuel; Shelley, Samantha; Todorova, Vesela

    2018-05-01

    This paper provides a brief introduction to antimatter and how it, along with other modern physics topics, is utilized in positron emission tomography (PET) scans. It further describes a hands-on activity for students to help them gain an understanding of how PET scans assist in detecting cancer. Modern physics topics provide an exciting way to introduce students to current applications of physics.

  9. Scanning laser Doppler vibrometry

    DEFF Research Database (Denmark)

    Brøns, Marie; Thomsen, Jon Juel

    With a Scanning Laser Doppler Vibrometer (SLDV) a vibrating surface is automatically scanned over predefined grid points, and data processed for displaying vibration properties like mode shapes, natural frequencies, damping ratios, and operational deflection shapes. Our SLDV – a PSV-500H from...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available Toggle navigation Test/Treatment Patient Type Screening/Wellness Disease/Condition Safety En Español More Info Images/Videos About Us News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses ...

  11. Occupational Mortality, Background on

    DEFF Research Database (Denmark)

    Lynge, Elsebeth

    2016-01-01

    in England and Wales from 1851 to 1979–1983, and these studies have provided key data on social inequalities in health. Death certificate studies have been used for identification of occupational groups with high excess risks from specific diseases. Follow-up studies require linkage of individual records......The study of occupational mortality involves the systematic tabulation of mortality by occupational or socioeconomic groups. Three main methods are used to conduct these studies: cross-sectional studies, death certificate studies, and follow-up studies. Cross-sectional studies were undertaken...

  12. Transverse section scanning mechanism

    International Nuclear Information System (INIS)

    Doherty, E.J.

    1978-01-01

    Apparatus is described for scanning a transverse, radionuclide scan-field using an array of focussed collimators. The collimators are movable tangentially on rails, driven by a single motor via a coupled screw. The collimators are also movable in a radial direction on rails driven by a step motor via coupled screws and bevel gears. Adjacent bevel gears rotate in opposite directions so adjacent collimators move in radially opposite directions. In use, the focal point of each collimator scans at least half of the scan-field, e.g. a human head located in the central aperture, and the electrical outputs of detectors associated with each collimator are used to determine the distribution of radioactive emission intensity at a number of points in the scan-field. (author)

  13. LIDAR COMBINED SCANNING UNIT

    Directory of Open Access Journals (Sweden)

    V. V. Elizarov

    2016-11-01

    Full Text Available Subject of Research. The results of lidar combined scanning unit development for locating leaks of hydrocarbons are presented The unit enables to perform high-speed scanning of the investigated space in wide and narrow angle fields. Method. Scanning in a wide angular field is produced by one-line scanning path by means of the movable aluminum mirror with a frequency of 20Hz and amplitude of 20 degrees of swing. Narrowband scanning is performed along a spiral path by the deflector. The deflection of the beam is done by rotation of the optical wedges forming part of the deflector at an angle of ±50. The control function of the scanning node is performed by a specialized software product written in C# programming language. Main Results. This scanning unit allows scanning the investigated area at a distance of 50-100 m with spatial resolution at the level of 3 cm. The positioning accuracy of the laser beam in space is 15'. The developed scanning unit gives the possibility to browse the entire investigated area for the time not more than 1 ms at a rotation frequency of each wedge from 50 to 200 Hz. The problem of unambiguous definition of the beam geographical coordinates in space is solved at the software level according to the rotation angles of the mirrors and optical wedges. Lidar system coordinates are determined by means of GPS. Practical Relevance. Development results open the possibility for increasing the spatial resolution of scanning systems of a wide range of lidars and can provide high positioning accuracy of the laser beam in space.

  14. Side-Scan-Sonar Lines for Hudson River, NY

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Side Scan Sonar and Subbottom Profiler Tracklines. Data was collected November 5 to December 15, 2009, in the estuary north from Saugerties to Troy. Fugro utilized...

  15. Facial recognition and laser surface scan: a pilot study

    DEFF Research Database (Denmark)

    Lynnerup, Niels; Clausen, Maja-Lisa; Kristoffersen, Agnethe May

    2009-01-01

    Surface scanning of the face of a suspect is presented as a way to better match the facial features with those of a perpetrator from CCTV footage. We performed a simple pilot study where we obtained facial surface scans of volunteers and then in blind trials tried to match these scans with 2D...... photographs of the faces of the volunteers. Fifteen male volunteers were surface scanned using a Polhemus FastSCAN Cobra Handheld Laser Scanner. Three photographs were taken of each volunteer's face in full frontal, profile and from above at an angle of 45 degrees and also 45 degrees laterally. Via special...

  16. Pre-Travel Medical Preparation of Business and Occupational Travelers

    Science.gov (United States)

    Khan, Nomana M.; Jentes, Emily S.; Brown, Clive; Han, Pauline; Rao, Sowmya R.; Kozarsky, Phyllis; Hagmann, Stefan H.F.; LaRocque, Regina C.; Ryan, Edward T.

    2016-01-01

    Objectives: The aim of the study was to understand more about pre-travel preparations and itineraries of business and occupational travelers. Methods: De-identified data from 18 Global TravEpiNet clinics from January 2009 to December 2012 were analyzed. Results: Of 23,534 travelers, 61% were non-occupational and 39% occupational. Business travelers were more likely to be men, had short times to departure and shorter trip durations, and commonly refused influenza, meningococcal, and hepatitis B vaccines. Most business travelers indicated that employers suggested the pre-travel health consultation, whereas non-occupational travelers sought consultations because of travel health concerns. Conclusions: Sub-groups of occupational travelers have characteristic profiles, with business travelers being particularly distinct. Employers play a role in encouraging business travelers to seek pre-travel consultations. Such consultations, even if scheduled immediately before travel, can identify vaccination gaps and increase coverage. PMID:26479857

  17. Occupational allergic multiorgan disease induced by wheat flour

    OpenAIRE

    Gómez Torrijos, Elisa; Rodríguez Sanchez, Joaquín; Diaz Perales, Araceli; García, R.; Feo-Brito, F.; García, C.; Pineda, Fernando; Quirce, Santiago

    2015-01-01

    Bakers are repeatedly exposed to wheat flour (WF) and may develop sensitization and occupational rhinoconjunctivitis and/or asthma to WF allergens.1 Several wheat proteins have been identified as causative allergens of occupational respiratory allergy in bakery workers.1 Testing of IgE reactivity in patients with different clinical profiles of wheat allergy (food allergy, wheat-dependent exercise-induced anaphylaxis, and baker's asthma) to salt-soluble and salt-insoluble protein fractions fro...

  18. Gossip and Occupational Ideology

    Science.gov (United States)

    Rysman, Alexander R.

    1976-01-01

    Defines the transmission of gossip as an essential social process reflecting a shared group membership and discusses the ways in which gossip supports ideologies held by members of a specific occupation. (MH)

  19. Occupancy and Occupants’ Actions

    DEFF Research Database (Denmark)

    Schweiker, Marcel; Carlucci, Salvatore; Andersen, Rune

    2018-01-01

    to study, measure, and ultimately model. The categories are physiological, individual, environmental, and spatial adjustments. Third, a list of adaptive and non-adaptive triggers together with contextual factors that could influence occupant behavior is presented. Individual elements are further grouped...... into physical environmental, physiological, psychological, and social aspects. Finally, a comprehensive table of studies related to occupant behavior and the corresponding significant and non-significant predictors, based on an extensive literature review, is shown. This table highlights areas of research where......Occupants’ presence and actions within the built environment are crucial aspects related to understanding variations in energy use. Within this chapter, first, a nomenclature for the field of research dealing with occupants in buildings is defined. This nomenclature distinguishes between occupants...

  20. Occupational lung diseases.

    Science.gov (United States)

    Furlow, Bryant

    2011-01-01

    Chest radiography and high-resolution computed tomography are indispensable tools in the detection, classification and characterization of occupational lung diseases that are caused by inhaling mineral particles such as asbestos, silicon-containing rock dust and other tissue-damaging antigens, nanomaterials and toxins. Radiographic evidence of occupational lung disease is interpreted with a patient's clinical signs and symptoms and a detailed occupational history in mind because of high variability in radiographic findings. This Directed Reading reviews the history, epidemiology, functional anatomy, pathobiology and medical diagnostic imaging of occupational lung diseases associated with inhalation of fine particulates in the workplace. This article is a Directed Reading. Your access to Directed Reading quizzes for continuing education credit is determined by your CE preference. For access to other quizzes, go to www.asrt.org/store.

  1. Occupants' window opening behaviour

    DEFF Research Database (Denmark)

    Fabi, Valentina; Andersen, Rune Korsholm; Corgnati, Stefano

    2012-01-01

    Energy consumption in buildings is influenced by several factors related to the building properties and the building controls, some of them highly connected to the behaviour of their occupants.In this paper, a definition of items referring to occupant behaviour related to the building control...... systems is proposed, based on studies presented in literature and a general process leading to the effects on energy consumptions is identified.Existing studies on the topic of window opening behaviour are highlighted and a theoretical framework to deal with occupants' interactions with building controls......, aimed at improving or maintaining the preferred indoor environmental conditions, is elaborated. This approach is used to look into the drivers for the actions taken by the occupants (windows opening and closing) and to investigate the existing models in literature of these actions for both residential...

  2. Occupational choice and values.

    OpenAIRE

    Kantas, A.

    1985-01-01

    It is suggested that psychological and sociological approaches to occupational choice can be linked together by employment of three concepts: work salience, values and motivation. Employing Vroom's (1964) cognitive model of motivation occupational choice was examined as a value attainment process. The subjects were 225 male pupils of two different school complexes in Athens, Greece. They were asked to respond to a work salience questionnaire and to rank order a set of ...

  3. Occupational health in Mexico.

    Science.gov (United States)

    Carreón, Tania; Santos-Burgoa, Carlos; Baron, Sherry; Hernández, Sendy

    2002-01-01

    The authors discuss the maquiladoras and child labor, and offer an overview of the history of occupational safety and health in Mexico that covers laws and regulations, social security, unions, and enforcement of legislation. The organization and structure of the various institutions responsible for occupational safety and health (OSH), as well as administrative procedures, are described. This article concludes with a list of the new challenges for OSH in Mexico.

  4. Radiation protection: occupational exposure

    International Nuclear Information System (INIS)

    Shah, G.A.

    1990-01-01

    The basis of the occupational exposure limit of 50 mSv recommended by the ICRP is questioned. New dosimetry at Hiroshima and Nagasaki, the fact that the dose-response curve may be non-linear and that the relative risk model may be applicable, are some of the arguments advanced to support a reduction in the occupational exposure dose limits. 5 refs., 2 tabs., 3 figs

  5. Occupational exposures. Annex H

    International Nuclear Information System (INIS)

    1982-01-01

    This Annex focuses on significant changes in the pattern of occupational exposure which have appeared since the 1972 and 1962 reports, and presents information on trends or particular causes of high exposures. A further objective is to clarify the reasons for which the Committee requires data on occupational exposure, and to suggest areas in which better data collection or analysis may be performed. Data are also reviewed on accidents involving the exposure of workers to substantial radiation doses.

  6. Occupational health in Malaysia.

    Science.gov (United States)

    Rampal, Krishna Gopal; Aw, Tar-Ching; Jefferelli, Shamsul Bahrin

    2002-01-01

    This article provides a detailed examination of Malaysian occupational health agencies and their roles in formulating and enforcing standards, promoting occupational health and safety (OSH), and providing advisory services. Available OSH training is described, and the need for policies and personnel in various industries is outlined. Further, the authors discuss how international models and collaboration have influenced Malaysian OSH, and how some successes can be repeated and failures remedied.

  7. Tuberculosis as occupational disease

    OpenAIRE

    Mendoza-Ticona, Alberto; Instituto de Medicina Tropical Alexander von Humboldt, Universidad Peruana Cayetano Heredia. Lima, Perú. Médico infectólogo tropicalista magister en Epidemiología Clínica.

    2014-01-01

    There is enough evidence to declare tuberculosis as an occupational disease among healthcare workers. In Peru, there are regulations granting employment rights regarding tuberculosis as an occupational disease, such as healthcare coverage for temporary or permanent disability. However, these rights have not been sufficiently socialized. This study presents information on the risk of acquiring tuberculosis in the workplace, and a review of the evidence to declare tuberculosis as an occupationa...

  8. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  9. Bone scan in pediatrics

    International Nuclear Information System (INIS)

    Gordon, I.; Peters, A.M.

    1987-01-01

    In 1984, a survey carried out in 21 countries in Europe showed that bone scintigraphy comprised 16% of all paediatric radioisotope scans. Although the value of bone scans in paediatrics is potentially great, their quality varies greatly, and poor-quality images are giving this valuable technique a bad reputation. The handling of children requires a sensitive staff and the provision of a few simple inexpensive items of distraction. Attempting simply to scan a child between two adult patients in a busy general department is a recipe for an unhappy, uncooperative child with the probable result of poor images. The intravenous injection of isotope should be given adjacent to the gamma camera room, unless dynamic scans are required, so that the child does not associate the camera with the injection. This injection is best carried out by someone competent in paediatric venipunture; the entire procedure should be explained to the child and parent, who should remain with child throughout. It is naive to think that silence makes for a cooperative child. The sensitivity of bone-seeking radioisotope tracers and the marked improvement in gamma camera resolution has allowed the bone scanning to become an integrated technique in the assessment of children suspected of suffering from pathological bone conditions. The tracer most commonly used for routine bone scanning is 99m Tc diphosphonate (MDP); other isotopes used include 99m Tc colloid for bone marrow scans and 67 Ga citrate and 111 In white blood cells ( 111 In WBC) for investigation of inflammatory/infective lesions

  10. Occupational stressors in nursing

    Directory of Open Access Journals (Sweden)

    N. Nikpeyma

    2009-04-01

    Full Text Available Background and aimsNursing provides a wide range of potential workplace stressors as it is  a profession that requires a high level of skill, teamworking in a variety of situations and provision  of 24-hour delivery of care .Occupational stress is a major factor of Staff sickness an  absenteeism.This study investigates the main occupational stressors in nursing profession in the  hope of identification and reducing it.MethodsIn this study a questionnaire consisting of three parts:demoghraphic data,the nurses  background and questions about occupational stress from Revised index fulfilled by 140 nurses.ResultsLack of reward for work well done(48/6%, Heavy workload(46/4% ,lack of Participation in decisions (39/3% , poor Control of work place(38/4%and lack of job  development (36/4% have been the main sources of Occupational stress for nurses.chronic  diseases, Night Shift working and working hours were positively associated with occupstional  stress.Conclusion Analysis indicated that effects of work factors on occupational stress are more than demoghraphic data. The findings of this study can assist health service organisations to provide an attractive working climate in order to decrease side effects and consequences of occupational stress. Furthermore, understanding this situation can help to develop coping strategies in order to reduce work-related stress.

  11. Occupational health in Brazil.

    Science.gov (United States)

    Bedrikow, B; Algranti, E; Buschinelli, J T; Morrone, L C

    1997-01-01

    Brazil is a recently industrialised country with marked contrasts in social and economic development. The availability of public/private services in its different regions also varies. Health indicators follow these trends. Occupational health is a vast new field, as in other developing countries. Occupational medicine is a required subject in graduation courses for physicians. Specialisation courses for university graduated professionals have more than 700 hours of lectures and train occupational health physicians, safety engineers and nursing staff. At the technical level, there are courses with up to 1300 hours for the training of safety inspectors. Until 1986 about 19,000 occupational health physicians, 18,000 safety engineers and 51,000 safety inspectors had been officially registered. Although in its infancy, postgraduation has attracted professionals at university level, through residence programmes as well as masters and doctors degrees, whereby at least a hundred good-quality research studies have been produced so far. Occupational health activities are controlled by law. Undertakings with higher risks and larger number of employees are required to hire specialised technical staff. In 1995 the Ministry of Labour demanded programmes of medical control of occupational health (PCMSO) for every worker as well as a programme of prevention of environmental hazards (PPRA). This was considered as a positive measure for the improvement of working conditions and health at work. Physicians specialising in occupational medicine are the professionals more often hired by the enterprises. Reference centres (CRSTs) for workers' health are connected to the State or City Health Secretariat primary health care units. They exist in more populated areas and are accepted by workers as the best way to accomplish the diagnosis of occupational diseases. There is important participation by the trade unions in the management of these reference centres. For 30 years now employers

  12. Population Health and Occupational Therapy.

    Science.gov (United States)

    Braveman, Brent

    2016-01-01

    Occupational therapy practitioners play an important role in improving the health of populations through the development of occupational therapy interventions at the population level and through advocacy to address occupational participation and the multiple determinants of health. This article defines and explores population health as a concept and describes the appropriateness of occupational therapy practice in population health. Support of population health practice as evidenced in the official documents of the American Occupational Therapy Association and the relevance of population health for occupational therapy as a profession are reviewed. Recommendations and directions for the future are included related to celebration of the achievements of occupational therapy practitioners in the area of population health, changes to the Occupational Therapy Practice Framework and educational accreditation standards, and the importance of supporting, recognizing, rewarding, and valuing occupational therapy practitioners who assume roles in which direct care is not their primary function. Copyright © 2016 by the American Occupational Therapy Association, Inc.

  13. Occupational Experience, Mobility, and Wages

    DEFF Research Database (Denmark)

    Groes, Fane

    In this paper we present how occupational tenure relates to wage growth and occupational mobility in Danish data. We show that the Danish data produces qualitatively similar results as found in U.S. data with respect to an increase in average wages when experience in an occupation increases. In a...... also is true for workers switching occupation and rm. After ve years of experience in an occupation the average probability of switching any type of occupation, including occupation and rm switches, has fallen from 25% to 12%........ In a sample of full time private employed, the first five years of experience in an occupation increases average wages with 8% to 15%, conditional on rm and industry tenure. We further show that the probability of switching occupation declines with experience in the occupation and that the declining hazard...

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... for a thyroid scan is 30 minutes or less. Thyroid Uptake You will be given radioactive iodine ( ... for each thyroid uptake is five minutes or less. top of page What will I experience during ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... evaluate changes in the gland following medication use, surgery, radiotherapy or chemotherapy top of page How should ... such as an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the ...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... abnormal was found, and should not be a cause of concern for you. If you had an ... abnormal was found, and should not be a cause of concern for you. Actual scanning time for ...

  17. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    Details are given of a tomographic scanning apparatus, with particular reference to a multiplexer slip ring means for receiving output from the detectors and enabling interfeed to the image reconstruction station. (U.K.)

  18. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    Details are presented of a tomographic scanning apparatus, its rotational assembly, and the control and circuit elements, with particular reference to the amplifier and multiplexing circuits enabling detector signal calibration. (U.K.)

  19. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    This patent specification relates to a tomographic scanning apparatus using a fan beam and digital output signal, and particularly to the design of the gas-pressurized ionization detection system. (U.K.)

  20. Pediatric CT Scans

    Science.gov (United States)

    The Radiation Epidemiology Branch and collaborators have initiated a retrospective cohort study to evaluate the relationship between radiation exposure from CT scans conducted during childhood and adolescence and the subsequent development of cancer.

  1. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... which are encased in metal and plastic and most often shaped like a box, attached to a ... will I experience during and after the procedure? Most thyroid scan and thyroid uptake procedures are painless. ...

  2. Heart CT scan

    Science.gov (United States)

    ... make to decrease the risk of heart disease. Risks Risks of CT scans include: Being exposed to ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  3. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... eat for several hours before your exam because eating can affect the accuracy of the uptake measurement. ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  4. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) is ... thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that uses ...

  5. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... that help physicians diagnose and evaluate medical conditions. These imaging scans use radioactive materials called radiopharmaceuticals or ... or had thyroid cancer. A physician may perform these imaging tests to: determine if the gland is ...

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Because nuclear medicine procedures are able to pinpoint molecular activity within the body, they offer the potential ... or imaging device that produces pictures and provides molecular information. The thyroid scan and thyroid uptake provide ...

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Actual scanning time for each thyroid uptake is five minutes or less. top of page What will ... diagnostic procedures have been used for more than five decades, and there are no known long-term ...

  8. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... top of page Additional Information and Resources RTAnswers.org Radiation Therapy for Head and Neck Cancer top ... Scan and Uptake Sponsored by Please note RadiologyInfo.org is not a medical facility. Please contact your ...

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information needed to make a diagnosis or to determine appropriate treatment, if any. Nuclear medicine is less expensive and ...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... the gamma camera and single-photon emission-computed tomography (SPECT). The gamma camera, also called a scintillation ... high as with other imaging techniques, such as CT or MRI. However, nuclear medicine scans are more ...

  11. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope.Specifications / Capabilities:Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  12. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... as an overactive thyroid gland, a condition called hyperthyroidism , cancer or other growths assess the nature of ... an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the last two ...

  13. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... painless. However, during the thyroid scan, you may feel uncomfortable when lying completely still with your head ... When the radiotracer is given intravenously, you will feel a slight pin prick when the needle is ...

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... energy. top of page What are some common uses of the procedure? The thyroid scan is used ... community, you can search the ACR-accredited facilities database . This website does not provide cost information. The ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... scan and thyroid uptake provide information about the structure and function of the thyroid. The thyroid is ... computer, create pictures offering details on both the structure and function of organs and tissues in your ...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... found, and should not be a cause of concern for you. If you had an intravenous line ... found, and should not be a cause of concern for you. Actual scanning time for each thyroid ...

  17. Body CT (CAT Scan)

    Science.gov (United States)

    ... a CT scan can be reformatted in multiple planes, and can even generate three-dimensional images. These ... other medical conditions and whether you have a history of heart disease, asthma, diabetes, kidney disease or ...

  18. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... the gland following medication use, surgery, radiotherapy or chemotherapy top of page How should I prepare? You ... You will receive specific instructions based on the type of scan you are undergoing. top of page ...

  19. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Uptake? A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) ... of thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that ...

  20. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    This patent specification describes a tomographic scanning apparatus, with particular reference to the adjustable fan beam and its collimator system, together with the facility for taking a conventional x-radiograph without moving the patient. (U.K.)

  1. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... exam of any medications you are taking, including vitamins and herbal supplements. You should also inform them ... of scan you are undergoing. top of page What does the equipment look like? The special camera ...

  2. The Scanning Optical Microscope.

    Science.gov (United States)

    Sheppard, C. J. R.

    1978-01-01

    Describes the principle of the scanning optical microscope and explains its advantages over the conventional microscope in the improvement of resolution and contrast, as well as the possibility of producing a picture from optical harmonies generated within the specimen.

  3. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... the gland following medication use, surgery, radiotherapy or chemotherapy top of page How should I prepare? You ... but is often performed on hospitalized patients as well. Thyroid Scan You will be positioned on an ...

  4. Occupational health offshore

    Energy Technology Data Exchange (ETDEWEB)

    Crosbie, A.; Davies, F.

    2002-07-01

    The proceedings contain the 29 papers presented at the conference plus the opening address from the chair of the Health and Safety Commission. The papers in the first session were concerned with policy, strategy and leadership and included a perspective from the offshore industry advisory committee, details of a health planning tool for occupational health assurance and lessons from occupational health management in the offshore sector. The two sessions on the second day dealt with occupational health in the offshore design process and case studies involving physical, chemical and biological agents. Topics included the need to consider occupational health when designing offshore installations, the development of a human factors engineering strategy in petrochemical engineering projects, measuring occupational exposure to hazardous chemicals, implementation of the noise at work regulations, hand arm vibration syndrome and issues with potable water maintenance. The two sessions on the third day were concerned with human factors and psychological health, and well-being and fitness for duty. Topics covered included circadian adaption to shift change in offshore shift workers, managing stress in the offshore environment, the role of employee assistance programmes in organisational stress management, health care and first aid (the revised ACOP), well-being at work, the medical and physical fitness of offshore emergency response rescue team members, the impact of health surveillance and promotion of offshore accident rates, and the implication of safety and heath of the aging of the workforce ion the Norwegian offshore industry.

  5. Zoonoses as occupational diseases

    Directory of Open Access Journals (Sweden)

    Giorgio Battelli

    2008-12-01

    Full Text Available Zoonoses are discussed as occupational diseases, with special reference to animal husbandry and related activities. After quoting some historical references, occupational zoonoses are examined in relation to the evolution of the concept of occupational zoonosis, the involvement of the World Health Organization in this field, their socio-economic significance, the principal working activities, zoonoses of greatest importance (with special reference to the Mediterranean region, the evaluation of damage and risks. An outline is made of the transmission of zoonoses from farm workers to animals and the biological hazards from the environment. The present situation of occupational zoonoses and related risks in industrialised and traditional farming activities are presented and the importance of some emerging and re-emerging zoonoses for the health of workers is highlighted. The author concludes by stressing that the prevention of occupational zoonoses must be implemented jointly by both veterinary and medical services through preventive measures and epidemiological surveillance of human and animal health, risk evaluation, diagnosis of infections and prompt reporting. It is hoped that the future will offer better inter-disciplinary collaboration and that legislation will be timely and better tailored to safeguard working health and safety.

  6. Laser-Based Slam with Efficient Occupancy Likelihood Map Learning for Dynamic Indoor Scenes

    Science.gov (United States)

    Li, Li; Yao, Jian; Xie, Renping; Tu, Jinge; Feng, Chen

    2016-06-01

    Location-Based Services (LBS) have attracted growing attention in recent years, especially in indoor environments. The fundamental technique of LBS is the map building for unknown environments, this technique also named as simultaneous localization and mapping (SLAM) in robotic society. In this paper, we propose a novel approach for SLAMin dynamic indoor scenes based on a 2D laser scanner mounted on a mobile Unmanned Ground Vehicle (UGV) with the help of the grid-based occupancy likelihood map. Instead of applying scan matching in two adjacent scans, we propose to match current scan with the occupancy likelihood map learned from all previous scans in multiple scales to avoid the accumulation of matching errors. Due to that the acquisition of the points in a scan is sequential but not simultaneous, there unavoidably exists the scan distortion at different extents. To compensate the scan distortion caused by the motion of the UGV, we propose to integrate a velocity of a laser range finder (LRF) into the scan matching optimization framework. Besides, to reduce the effect of dynamic objects such as walking pedestrians often existed in indoor scenes as much as possible, we propose a new occupancy likelihood map learning strategy by increasing or decreasing the probability of each occupancy grid after each scan matching. Experimental results in several challenged indoor scenes demonstrate that our proposed approach is capable of providing high-precision SLAM results.

  7. Occupational injuries in Bahrain.

    Science.gov (United States)

    al-Arrayed, A; Hamza, A

    1995-10-01

    A study was conducted to show the problem of occupational injuries in Bahrain and try to highlight some solutions that may help to prevent or reduce workplace hazards. The data for occupational injuries between 1988 to 1991 from the social insurance records were reviewed and analysed. The data were summarized, grouped and tabulated according to age, sex, nationality, work place, type of injuries, cause and site of injury. Data were analysed statistically, frequencies were computed and results represented graphically. The study shows that there was a decline in the number of injuries in 1990 and 1991 due to a slow-down of economic activities in general in the Arabian Gulf region during the Gulf War. It also shows that Asian workers are at a high risk of occupational injuries.

  8. Measuring site occupancy

    DEFF Research Database (Denmark)

    Rogowska-Wrzesinska, Adelina; Wojdyla, Katarzyna; Williamson, James

    2014-01-01

    occupancy of the modification site. We show that, on one hand, heavily modified cysteines are not necessarily involved in the response to oxidative stress. On the other hand residues with low modification level can be dramatically affected by mild oxidative imbalance. We make use of high resolution mass...... peptides corresponding to 90 proteins. Only 6 modified peptides changed significantly under mild oxidative stress. Quantitative information allowed us to determine relative modification site occupancy of each identified modified residue and pin point heavily modified ones. The method proved to be precise...... and sensitive enough to detect and quantify endogenous levels of oxidative stress on proteome-wide scale and brings a new perspective on the role of the modification site occupancy in cellular redox response....

  9. Occupational performance of women subjected to mastectomy

    Directory of Open Access Journals (Sweden)

    Jamylle Silva de Brito

    2014-12-01

    Full Text Available Among the several therapeutic approaches to combat breast cancer, mastectomy is the most feared by women, not only because of its aggressive invasive characteristics to the female body, but also because of its biological, functional, emotional, and social repercussions. The objective of the present study was to outline the occupational performance profile through the description of daily life, productive and leisure activities of women that have undergone mastectomy. This is a descriptive cross-sectional study with 21 women carried out at a school hospital in Recife, Pernambuco state, Brazil, from June to September, 2011. We used a sociodemographic questionnaire and occupational assessment by the Canadian Model of Occupational Performance (CMOP. In the occupational performance evaluation, Productivity was the most compromised area, followed by Leisure. Taking care of the body after mastectomy was not a restraint to the development of the daily-life, productive and leisure activities for the operated women, although some reorganization was needed to maintain a satisfactory performance.

  10. Occupational reproductive health risks.

    Science.gov (United States)

    Filkins, K; Kerr, M J

    1993-01-01

    The potentially harmful effects on women of certain workplace exposures are widely appreciated, and steps to control these have included legislative efforts such as right-to-know laws of well as corporate policies mandating selective restriction of fertile women, which are illegal under federal civil rights laws. This chapter reviews the various occupational health risks reproductive women face in the workplace but also considers the effects of other genetic, medical, social, infectious, and environmental factors which may be of even greater concern than most occupational factors.

  11. Preoperative bone scans

    International Nuclear Information System (INIS)

    Charkes, N.D.; Malmud, L.S.; Caswell, T.; Goldman, L.; Hall, J.; Lauby, V.; Lightfoot, W.; Maier, W.; Rosemond, G.

    1975-01-01

    Strontium nitrate Sr-87m bone scans were made preoperatively in a group of women with suspected breast cancer, 35 of whom subsequently underwent radical mastectomy. In 3 of the 35 (9 percent), the scans were abnormal despite the absence of clinical or roentgenographic evidence of metastatic disease. All three patients had extensive axillary lymph node involvement by tumor, and went on to have additional bone metastases, from which one died. Roentgenograms failed to detect the metastases in all three. Occult bone metastases account in part for the failure of radical mastectomy to cure some patients with breast cancer. It is recommended that all candidates for radical mastectomy have a preoperative bone scan. (U.S.)

  12. Frequency scanning microstrip antennas

    DEFF Research Database (Denmark)

    Danielsen, Magnus; Jørgensen, Rolf

    1979-01-01

    The principles of using radiating microstrip resonators as elements in a frequency scanning antenna array are described. The resonators are cascade-coupled. This gives a scan of the main lobe due to the phase-shift in the resonator in addition to that created by the transmission line phase......-shift. Experimental results inX-band, in good agreement with the theory, show that it is possible to scan the main lobe an angle ofpm30degby a variation of the frequencypm300MHz, and where the 3 dB beamwidth is less than10deg. The directivity was 14.7 dB, while the gain was 8.1 dB. The efficiency might be improved...

  13. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    Abele, M.

    1983-01-01

    A computerized tomographic scanning apparatus suitable for diagnosis and for improving target identification in stereotactic neurosurgery is described. It consists of a base, a source of penetrating energy, a detector which produces scanning signals and detector positioning means. A frame with top and bottom arms secures the detector and source to the top and bottom arms respectively. A drive mechanism rotates the frame about an axis along which the frame may also be moved. Finally, the detector may be moved relative to the bottom arm in a direction contrary to the rotation of the frame. (U.K.)

  14. Scanning the phenomenological MSSM

    CERN Document Server

    Wuerzinger, Jonas

    2017-01-01

    A framework to perform scans in the 19-dimensional phenomenological MSSM is developed and used to re-evaluate the ATLAS experiments' sensitivity to R-parity-conserving supersymmetry with LHC Run 2 data ($\\sqrt{s}=13$ TeV), using results from 14 separate ATLAS searches. We perform a $\\tilde{t}_1$ dedicated scan, only considering models with $m_{\\tilde{t}_1}<1$ TeV, while allowing both a neutralino ($\\tilde{\\chi}_1^0$) and a sneutrino ($\\tilde{\

  15. Calibration of scanning Lidar

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Courtney, Michael

    This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Høvsøre. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibrations at two heights against two cup anemometers mounted on a mast. Additio......This report describes the tests carried out on a scanning lidar at the DTU Test Station for large wind turbines, Høvsøre. The tests were divided in two parts. In the first part, the purpose was to obtain wind speed calibrations at two heights against two cup anemometers mounted on a mast...

  16. Adaptive Optical Scanning Holography

    Science.gov (United States)

    Tsang, P. W. M.; Poon, Ting-Chung; Liu, J.-P.

    2016-01-01

    Optical Scanning Holography (OSH) is a powerful technique that employs a single-pixel sensor and a row-by-row scanning mechanism to capture the hologram of a wide-view, three-dimensional object. However, the time required to acquire a hologram with OSH is rather lengthy. In this paper, we propose an enhanced framework, which is referred to as Adaptive OSH (AOSH), to shorten the holographic recording process. We have demonstrated that the AOSH method is capable of decreasing the acquisition time by up to an order of magnitude, while preserving the content of the hologram favorably. PMID:26916866

  17. Scanning laser microscope for imaging nanostructured superconductors

    International Nuclear Information System (INIS)

    Ishida, Takekazu; Arai, Kohei; Akita, Yukio; Miyanari, Mitsunori; Minami, Yusuke; Yotsuya, Tsutomu; Kato, Masaru; Satoh, Kazuo; Uno, Mayumi; Shimakage, Hisashi; Miki, Shigehito; Wang, Zhen

    2010-01-01

    The nanofabrication of superconductors yields various interesting features in superconducting properties. A variety of different imaging techniques have been developed for probing the local superconducting profiles. A scanning pulsed laser microscope has been developed by the combination of the XYZ piezo-driven stages and an optical fiber with an aspheric focusing lens. The scanning laser microscope is used to understand the position-dependent properties of a superconducting MgB 2 stripline of length 100 μm and width of 3 μm under constant bias current. Our results show that the superconducting stripline can clearly be seen in the contour image of the scanning laser microscope on the signal voltage. It is suggested from the observed image that the inhomogeneity is relevant in specifying the operating conditions such as detection efficiency of the sensor.

  18. Scanning laser microscope for imaging nanostructured superconductors

    Science.gov (United States)

    Ishida, Takekazu; Arai, Kohei; Akita, Yukio; Miyanari, Mitsunori; Minami, Yusuke; Yotsuya, Tsutomu; Kato, Masaru; Satoh, Kazuo; Uno, Mayumi; Shimakage, Hisashi; Miki, Shigehito; Wang, Zhen

    2010-10-01

    The nanofabrication of superconductors yields various interesting features in superconducting properties. A variety of different imaging techniques have been developed for probing the local superconducting profiles. A scanning pulsed laser microscope has been developed by the combination of the XYZ piezo-driven stages and an optical fiber with an aspheric focusing lens. The scanning laser microscope is used to understand the position-dependent properties of a superconducting MgB 2 stripline of length 100 μm and width of 3 μm under constant bias current. Our results show that the superconducting stripline can clearly be seen in the contour image of the scanning laser microscope on the signal voltage. It is suggested from the observed image that the inhomogeneity is relevant in specifying the operating conditions such as detection efficiency of the sensor.

  19. Occupant Controlled Lighting

    DEFF Research Database (Denmark)

    Logadóttir, Ásta

    2011-01-01

    preferences for correlated colour temperature (CCT). The results suggest that the method of adjustment, previously used in the lighting literature, is not adequate to generalize about occupant preferences for illuminance or CCT. Factors that influence occupants’ lighting preference when applying the method...

  20. Occupational Burnout among Librarians.

    Science.gov (United States)

    Haack, Mary; And Others

    1984-01-01

    Outlines stages of occupational burnout (enthusiasm, stagnation, frustration, apathy) and begins empirical assessment of burnout syndrome among librarians and other information professionals. Results of pilot survey conducted at one-day conference on reference service using two measures (Staff Burnout Scale for Health Professionals, projective…

  1. Occupational Therapy (For Parents)

    Science.gov (United States)

    ... Fitness Diseases & Conditions Infections Drugs & Alcohol School & Jobs Sports Expert Answers (Q&A) Staying Safe Videos for ... Occupational therapists might: help kids work on fine motor skills so they ... maintain positive behaviors in all environments (e.g., instead of hitting ...

  2. Hospitality Occupations. Curriculum Guide.

    Science.gov (United States)

    California State Dept. of Education, Sacramento. Bureau of Homemaking Education.

    This curriculum guide on the hospitality occupations was developed to help secondary and postsecondary home economics teachers prepare individuals for entry-level jobs in the hospitality industry. The content is in seven sections. The first section presents organizational charts of a medium-size hotel, food and beverage division, housekeeping and…

  3. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... process that regulates the rate at which the body converts food to energy. top of page What are some common uses of the procedure? The thyroid scan is used to determine the size, shape and position of the thyroid gland. The ...

  4. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available Toggle navigation Test/Treatment Patient Type Screening/Wellness Disease/Condition Safety En Español More Info Images/Videos About Us News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake ...

  5. Dialogue scanning measuring systems

    International Nuclear Information System (INIS)

    Borodyuk, V.P.; Shkundenkov, V.N.

    1985-01-01

    The main developments of scanning measuring systems intended for mass precision processsing of films in nuclear physics problems and in related fields are reviewed. A special attention is paid to the problem of creation of dialogue systems which permit to simlify the development of control computer software

  6. Scanning electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Cox, B. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

    1970-05-15

    The JSM-11 scanning electron microscope at CRNL has been used extensively for topographical studies of oxidized metals, fracture surfaces, entomological and biological specimens. A non-dispersive X-ray attachment permits the microanalysis of the surface features. Techniques for the production of electron channeling patterns have been developed. (author)

  7. Scanning tunneling microscopy

    International Nuclear Information System (INIS)

    Binnig, G.; Rohrer, H.

    1983-01-01

    Based on vacuum tunneling, a novel type of microscope, the scanning tunneling microscope (STM) was developed. It has an unprecedented resolution in real space on an atomic scale. The authors review the important technical features, illustrate the power of the STM for surface topographies and discuss its potential in other areas of science and technology. (Auth.)

  8. Bone scan in rheumatology

    International Nuclear Information System (INIS)

    Morales G, R.; Cano P, R.; Mendoza P, R.

    1993-01-01

    In this chapter a revision is made concerning different uses of bone scan in rheumatic diseases. These include reflex sympathetic dystrophy, osteomyelitis, spondyloarthropaties, metabolic bone diseases, avascular bone necrosis and bone injuries due to sports. There is as well some comments concerning pediatric pathology and orthopedics. (authors). 19 refs., 9 figs

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... information. The thyroid scan and thyroid uptake provide information about the structure and function of the thyroid. The thyroid is a gland in the neck that controls metabolism , a chemical process that regulates the rate at which the body ...

  10. Tomographic scanning apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    Details are given of a tomographic scanning apparatus, with particular reference to the means of adjusting the apparent gain of the signal processing means for receiving output signals from the detectors, to compensate for drift in the gain characteristics, including means for passing a reference signal. (U.K.)

  11. Stabilized radiographic scanning agent

    International Nuclear Information System (INIS)

    Fawzi, M.B.

    1979-01-01

    A stable composition useful in preparation of technetium-99m-based radiographic scanning agents has been developed. The composition contains a stabilizing amount of gentisate stabilizer selected from gentisic acid and its soluble pharmaceutically-acceptable salts and esthers. (E.G.)

  12. Scanning electron microscope

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The principle underlying the design of the scanning electron microscope (SEM), the design and functioning of SEM are described. Its applications in the areas of microcircuitry and materials science are outlined. The development of SEM in India is reviewed. (M.G.B.)

  13. Radiographic scanning agent

    International Nuclear Information System (INIS)

    Tofe, A.J.

    1976-01-01

    A stable radiographic scanning agent on a sup(99m)Tc basis has been developed. The substance contains a pertechnetate reduction agent, tin(II)-chloride, chromium(II)-chloride, or iron(II)-sulphate, as well as an organospecific carrier and ascorbic acid or a pharmacologically admissible salt or ester of ascorbic acid. (VJ) [de

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... you: have had any tests, such as an x-ray or CT scan, surgeries or treatments using iodinated ... page How does the procedure work? With ordinary x-ray examinations, an image is made by passing x- ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... for a thyroid scan is 30 minutes or less. Thyroid Uptake You will be given radioactive iodine (I-123 or I-131) in liquid or capsule form to swallow. The thyroid uptake will begin several hours to 24 hours later. Often, two separate uptake ...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the last two months. are taking medications or ingesting other substances that contain iodine , including kelp, seaweed, cough syrups, multivitamins or heart medications. have any ...

  17. CT Scan of Thirteen Natural Mummies Dating Back to the XVI-XVIII Centuries: An Emerging Tool to Investigate Living Conditions and Diseases in History.

    Directory of Open Access Journals (Sweden)

    Enrico Petrella

    Full Text Available To correlate the radiologic findings detected with computed tomography scan with anthropological data in 13 naturally mummified bodies discovered during works of recovery of an ancient church in a crypt in Roccapelago, in the Italian Apennines.From a group of about sixty not-intentionally mummified bodies, thirteen were selected to be investigated with volumetric computed tomography (CT. Once CT scan was performed, axial images were processed to gather MPR and Volume Rendering reconstructions. Elaborations of these images provided anthropometric measurements and a non-invasive analysis of the residual anatomical structures. For each body the grade of preservation and the eventual pathological changes were recorded. Furthermore, in order to identify nutritional and occupational markers, radiologic signs of bone tropism and degenerative changes were analysed and graded.Mummies included seven females and six males, with an estimated age ranging from 20 to 60 years. The first relevant finding identified was a general low grade of preservation, due to the lack of anatomic tissues different from bones, tendons and dehydrated skin. The low grade of preservation was related to the natural process of mummification. Analysing bone degenerative changes on CT scan, the majority of the bodies had significant occupational markers consisting of arthritis in the spine, lower limbs and shoulders even in young age. Few were the pathological findings identified. Among these, the most relevant included a severe bilateral congenital hip dysplasia and a wide osteolytic lesion involving left orbit and petrous bone that was likely the cause of death.Although the low grade of preservation of these mummies, the multidisciplinary approach of anthropologists and radiologists allowed several important advances in knowledge for the epidemiology of Roccapelago. First of all, a profile of living conditions was delineated. It included occupational and nutritional conditions

  18. Occupational chronic obstructive pulmonary disease

    DEFF Research Database (Denmark)

    Omland, Oyvind; Würtz, Else Toft; Aasen, Tor Børvig

    2014-01-01

    Occupational-attributable chronic obstructive pulmonary disease (COPD) presents a substantial health challenge. Focusing on spirometric criteria for airflow obstruction, this review of occupational COPD includes both population-wide and industry-specific exposures....

  19. Occupational Safety and Health Administration

    Science.gov (United States)

    ... Twitter Instagram RSS Subscribe Occupational Safety and Health Administration English | Spanish MENU OSHA English | Spanish Search A ... STATES DEPARTMENT OF LABOR Occupational Safety and Health Administration 200 Constitution Ave., NW, Washington, DC 20210 800- ...

  20. Occupational Therapy's Role with Autism

    Science.gov (United States)

    Fact Sheet Occupational Therapy’s Role with Autism Autism is a lifelong condition associated with a varied course from early childhood through adulthood. Occupational therapy practitioners are distinctly qualified to ...

  1. Mission Critical Occupation (MCO) Charts

    Data.gov (United States)

    Office of Personnel Management — Agencies report resource data and targets for government-wide mission critical occupations and agency specific mission critical and/or high risk occupations. These...

  2. Occupational causes of male infertility

    DEFF Research Database (Denmark)

    Bonde, Jens P E

    2013-01-01

    To highlight and discuss the new evidence on occupational and environmental risk to male reproductive function.......To highlight and discuss the new evidence on occupational and environmental risk to male reproductive function....

  3. Occupational protein contact dermatitis.

    Science.gov (United States)

    Barbaud, Annick; Poreaux, Claire; Penven, Emmanuelle; Waton, Julie

    2015-01-01

    Occupational contact dermatitis is generally caused by haptens but can also be induced by proteins causing mainly immunological contact urticaria (ICU); chronic hand eczema in the context of protein contact dermatitis (PCD). In a monocentric retrospective study, from our database, only 31 (0.41%) of patients with contact dermatitis had positive skin tests with proteins: 22 had occupational PCD, 3 had non-occupational PCD, 5 occupational ICU and 1 cook had a neutrophilic fixed food eruption (NFFE) due to fish. From these results and analysis of literature, the characteristics of PCD can be summarized as follows. It is a chronic eczematous dermatitis, possibly exacerbated by work, suggestive if associated with inflammatory perionyxix and immediate erythema with pruritis, to be investigated when the patient resumes work after a period of interruption. Prick tests with the suspected protein-containing material are essential, as patch tests have negative results. In case of multisensitisation revealed by prick tests, it is advisable to analyse IgE against recombinant allergens. A history of atopy, found in 56 to 68% of the patients, has to be checked for. Most of the cases are observed among food-handlers but PCD can also be due to non-edible plants, latex, hydrolysed proteins or animal proteins. Occupational exposure to proteins can thus lead to the development of ICU. Reflecting hypersensitivity to very low concentrations of allergens, investigating ICU therefore requires caution and prick tests should be performed with a diluted form of the causative protein-containing product. Causes are food, especially fruit peel, non-edible plants, cosmetic products, latex, animals.

  4. Radiation protection in occupational health

    International Nuclear Information System (INIS)

    1987-01-01

    The document is a training manual for physicians entering the field of occupational medicine for radiation workers. Part 1 contains the general principles for the practice of occupational health, namely health surveillance and the role of the occupational physician in the workplace, and Part 2 provides the essential facts necessary to understand the basic principles of radiation physics, radiobiology, dosimetry and radiation effects which form the basis for occupational radiation health

  5. Effect of a 4-year workplace-based physical activity intervention program on the blood lipid profiles of participating employees: the high-risk and population strategy for occupational health promotion (HIPOP-OHP) study.

    Science.gov (United States)

    Naito, Mariko; Nakayama, Takeo; Okamura, Tomonori; Miura, Katsuyuki; Yanagita, Masahiko; Fujieda, Yoshiharu; Kinoshita, Fujihisa; Naito, Yoshihiko; Nakagawa, Hideaki; Tanaka, Taichiro; Ueshima, Hirotsugu

    2008-04-01

    Individuals who are physically fit or engage in regular physical activity have a lower incidence of cardiovascular disease and risk of mortality. We conducted a large-scale controlled trial of interventions to decrease cardiovascular risk factors, during which we assessed the effect of a workplace-based intervention program, which was part of a population strategy for promoting long-term increases in physical activity, on the blood lipid profiles of participating employees. Data were collected from 2929 participants and this report presents the results of a survey conducted in five factories for the intervention group and five factories for the control group at baseline and year 5. The absolute/proportional changes in HDL-cholesterol were 2.7 mg/dL (4.8%) in the intervention group and -0.6 mg/dL (-1.0%) in the control group. The differences between the two groups in the change in serum levels of HDL-cholesterol were highly significant (pphysical activity raises serum HDL-cholesterol levels of middle-aged employees. Increased awareness of the benefits of physical activity, using environmental rearrangement and health promotion campaigns, which especially target walking, may have contributed to a beneficial change in serum HDL-cholesterol levels in the participants.

  6. An Evaluation of an Occupational Health Advice Service

    Science.gov (United States)

    Shearn, P.; Ford, Norma J.; Murphy, R. G.

    2010-01-01

    Objective: The objective of this article is to identify the profile of service users of an occupational health (OH) support service and establish areas of need, and to gather client feedback on the experience of participating in the support service and perceived outcomes and the impact of the advice received. Design and Setting: We carried out…

  7. Dopamine D2 receptor occupancy in normal humans treated with a novel antipsychotic drug YKP1358 measured by PET and [11c]raclopride

    International Nuclear Information System (INIS)

    Lee, J. S.; Kim, S. J.; Lee, K. J.; Kim, E.; Yu, K. S.; Jang, I. J.; Kwon, J. S.; Kang, W. J.; Jeong, J. M.; Lee, D. S.; Chung, J. K.; Lee, M. C.

    2005-01-01

    YKP1358 is a novel serotonin (5-HT 2A ) and dopamine (D 2 ) antagonist, and fitted the general profile of an atypical neuroleptic agent in preclinical studies. The time course of D 2 receptor occupancy in the brain of living human after a single oral dose of YKP1358 was measured using PET and related to the plasma drug levels. A single oral dose, dose escalation (100 mg, 200 mg, and 250 mg), open-label study was performed in 9 healthy male volunteers (3 per each dose) using the [ 11 C]raclopried PET. After the baseline scan, each subject was studied at 2, 5, and 10 hours after the single administration of YKP1358. Blood samples for evaluation of plasma concentration of YKP1358 were also taken at various time points (0-32 hours post-dose). Binding potential (BP) of [ 11 C]raclopride in the putamen was estimated with simplified reference tissue model and percent reduction of the BP was calculated to obtain the D 2 receptor occupancy. BP parametric image was generated using a pixel-wise Logan noninvasive plot. T max of plasma concentration-time profiles was 0.67 hours, and elimination half-life was 5.71, 7.46, and 8.58 hours in 100 mg, 200 mg, and 250 mg dosing groups, respectively. D 2 receptor occupancy of YKP1358 was 60 to 80% at 2 hours, 40 to 60% at 5 hours, and 20 to 50% at 10 hours. The relationship of plasma concentration and D 2 receptor occupancy of YKP1358 was well predicted by Emax model, and Emax was 100 %, EC50 was 8.9 (=1.1) ng/mI, and Hills coefficient was 0.525. PK profile of YKP1358 showed individual variation, but the D 2 receptor occupancy was less variable and well predicted by an Emax model. Since D 2 antagonists show therapeutic effects at 50 to 80% D 2 occupancy and the EC50 of YKP1358 is less than 10 ng/ml, doses of YKP1358 which maintain plasma concentrations above 10 ng/ml are expected to show therapeutic effects

  8. Perfil da demanda atendida em ambulatório de doenças profissionais e a presença de lesões por esforços repetitivos Profile of occupational disease outpatients and the presence of repetitive strain injury

    Directory of Open Access Journals (Sweden)

    Ricardo J Reis

    2000-06-01

    Full Text Available OBJETIVO: Caracterizar o perfil do paciente atendido em ambulatório de doenças profissionais de um hospital geral e, em especial, o portador da condição patológica mais freqüente: as lesões por esforços repetitivos (LER. MÉTODOS: Foram analisadas as 565 fichas-resumo de atendimento ambulatorial em saúde do trabalhador, em 1996, em função de variáveis sociodemográficas, de características do trabalho e de diagnóstico. Foram adotados os seguintes procedimentos: descrição univariável de todas as variáveis; análise bivariada, utilizando-se o teste do qui-quadrado (chi² para variáveis categóricas; comparação de médias ou amplitudes para variável categórica e outra quantitativa; análise multivariada por meio de modelos log-linear, com transformação logit, para detectar os grupos com maior proporção de LER. RESULTADOS: Houve predomínio no atendimento de pacientes do sexo feminino com menos de 40 anos, sendo que, nos casos de LER, esse predomínio mostrou-se mais acentuado. As ocupações agrupadas apareceram em ordem decrescente, na seqüência: administrativos, operários e prestadores de serviços, sendo 59,6% pertencentes ao ramo de atividade econômica de serviços. As LER corresponderam a 56% dos diagnósticos feitos nas primeiras consultas. CONCLUSÕES: Confirmou-se a tendência de mudança no perfil epidemiológico das demandas atendidas no ambulatório de doenças profissionais, no final da década de 80, quando emergiram as LER. Deslocaram-se para uma minoria as antigas doenças profissionais decorrentes da exposição a riscos químicos e físicos, em função daquelas relacionadas às condições ergonômicas inadequadas.OBJECTIVE: To assess the profile of outpatients seen at an occupational disease clinic of a general and repetitive strain injury (RSI patients by using multivariate analyze. METHODS: The first 565 visit registries for the year 1996 were assessed regarding their social and demographics

  9. Scanning probe microscopy

    International Nuclear Information System (INIS)

    Mainsbridge, B.

    1994-01-01

    In late 1959, Richard Feynman observed that manoeuvring atoms was something that could be done in principle but has not been done, 'because we are too big'. In 1982, the scanning tunnelling microscope (STM) was invented and is now a central tool for the construction of nanoscale devices in what was known as molecular engineering, and now, nanotechnology. The principles of the microscope are outlined and references are made to other scanning devices which have evolved from the original invention. The method of employment of the STM as a machine tool is described and references are made to current speculations on applications of the instrument in nanotechnology. A short bibliography on this topic is included. 27 refs., 7 figs

  10. Scanning probe microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Mainsbridge, B [Murdoch Univ., WA (Australia). School of Mathematical and Physical Sciences

    1994-12-31

    In late 1959, Richard Feynman observed that manoeuvring atoms was something that could be done in principle but has not been done, `because we are too big`. In 1982, the scanning tunnelling microscope (STM) was invented and is now a central tool for the construction of nanoscale devices in what was known as molecular engineering, and now, nanotechnology. The principles of the microscope are outlined and references are made to other scanning devices which have evolved from the original invention. The method of employment of the STM as a machine tool is described and references are made to current speculations on applications of the instrument in nanotechnology. A short bibliography on this topic is included. 27 refs., 7 figs.

  11. 67Ga lung scan

    International Nuclear Information System (INIS)

    Niden, A.H.; Mishkin, F.S.; Khurana, M.M.L.; Pick, R.

    1977-01-01

    Twenty-three patients with clinical signs of pulmonary embolic disease and lung infiltrates were studied to determine the value of gallium citrate 67 Ga lung scan in differentiating embolic from inflammatory lung disease. In 11 patients without angiographically proved embolism, only seven had corresponding ventilation-perfusion defects compatible with inflammatory disease. In seven of these 11 patients, the 67 Ga concentration indicated inflammatory disease. In the 12 patients with angiographically proved embolic disease, six had corresponding ventilation-perfusion defects compatible with inflammatory disease. None had an accumulation of 67 Ga in the area of pulmonary infiltrate. Thus, ventilation-perfusion lung scans are of limited value when lung infiltrates are present. In contrast, the accumulation of 67 Ga in the lung indicates an inflammatory process. Gallium imaging can help select those patients with lung infiltrates who need angiography

  12. Horizon Scanning for Pharmaceuticals

    DEFF Research Database (Denmark)

    Lepage-Nefkens, Isabelle; Douw, Karla; Mantjes, GertJan

    for a joint horizon scanning system (HSS).  We propose to create a central “horizon scanning unit” to perform the joint HS activities (a newly established unit, an existing HS unit, or a third party commissioned and financed by the collaborating countries). The unit will be responsible for the identification...... and filtration of new and emerging pharmaceutical products. It will maintain and update the HS database, organise company pipeline meetings, and disseminate the HSS’s outputs.  The HS unit works closely together with the designated national HS experts in each collaborating country. The national HS experts...... will collect country-specific information, liaise between the central HS unit and country-specific clinical and other experts, coordinate the national prioritization process (to select products for early assessment), and communicate the output of the HSS to national decision makers.  The outputs of the joint...

  13. Trabalhador portuário: perfil de doenças ocupacionais diagnosticadas em serviço de saúde ocupacional Trabajador portuario: perfil de enfermedades ocupacionales diagnosticadas en un servicio de salud ocupacional Dock worker: profile of occupational diseases diagnosed in an occupational health service

    Directory of Open Access Journals (Sweden)

    Marlise Capa Verde de Almeida

    2012-01-01

    identificaron 527 diagnósticos, estando los principales relacionados al trabajo: hipertensión (8,3%, lumbalgia (6,2%, otras enfermedades pulmonares (1,7% y episodios depresivos (1,2%. CONCLUSIÓN: se constató el ataque del trabajador por patologías ocupacionales de orden mental, circulatorio, respiratorio y osteomuscular, evidenciando morbilidades que lo afectan e interfieren en su calidad de vida y en la productividad de las actividades laborales.OBJECTIVE: To identify the diseases diagnosed in dock workers, obtaining outpatient occupational medicine at the dock. METHODS: A quantitative descriptive study with retrospective analysis, which used the medical records of dock workers between 2000 and 2009 as a data source. Data collection was developed by application of a predetermined form and proceeded to descriptive quantitative analysis of 953 medical records of workers. RESULTS: A total of 953 medical files (94.7%, of which 90.47% were from male workers, 52% of those aged over 50 years, and 51.7% with over 19 years experience. 527 diagnoses were identified, with the principal related to work being: hypertension (8.3%, back pain (6.2%, other pulmonary diseases (1.7% and depressive episodes (1.2%. CONCLUSION: There is involvement of the worker in occupational disorders of the mental, circulatory, respiratory and musculoskeletal systems, showing morbidities that affect and interfere with their quality of life and productivity of labor activities.

  14. Multichannel scanning spectrophotometer

    International Nuclear Information System (INIS)

    Lagutin, A.F.

    1979-01-01

    A spectrophotometer designed in the Crimea astrophysical observatory is described. The spectrophotometer is intended for the installation at the telescope to measure energy distribution in the star spectra in the 3100-8550 A range. The device is made according to the scheme with a fixed diffraction lattice. The choice of the optical kinematic scheme is explained. The main design elements are shown. Some singularities of the scanning drive kinematics are considered. The device performance is given

  15. Scanning drop sensor

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jian; Xiang, Chengxiang; Gregoire, John

    2017-05-09

    Electrochemical experiments are performed on a collection of samples by suspending a drop of electrolyte solution between an electrochemical experiment probe and one of the samples that serves as a test sample. During the electrochemical experiment, the electrolyte solution is added to the drop and an output solution is removed from the drop. The probe and collection of samples can be moved relative to one another so the probe can be scanned across the samples.

  16. Scanning drop sensor

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Jian; Xiang, Chengxiang; Gregoire, John M.; Shinde, Aniketa A.; Guevarra, Dan W.; Jones, Ryan J.; Marcin, Martin R.; Mitrovic, Slobodan

    2017-05-09

    Electrochemical or electrochemical and photochemical experiments are performed on a collection of samples by suspending a drop of electrolyte solution between an electrochemical experiment probe and one of the samples that serves as a test sample. During the electrochemical experiment, the electrolyte solution is added to the drop and an output solution is removed from the drop. The probe and collection of samples can be moved relative to one another so the probe can be scanned across the samples.

  17. IMEF gamma scanning system

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Sang Yeol; Park, Dae Kyu; Ahn, Sang Bok; Ju, Yong Sun; Jeon, Yong Bum

    1997-06-01

    The gamma scanning system which is installed in IMEF is the equipment obtaining the gamma ray spectrum from irradiated fuels. This equipment could afford the useful data relating spent fuels like as burn-up measurements. We describe the specifications of the equipment and its accessories, and also described its operation procedure so that an operator can use this report as the operation procedure. (author). 1 tab., 11 figs., 11 refs.

  18. IMEF gamma scanning system

    International Nuclear Information System (INIS)

    Baek, Sang Yeol; Park, Dae Kyu; Ahn, Sang Bok; Ju, Yong Sun; Jeon, Yong Bum.

    1997-06-01

    The gamma scanning system which is installed in IMEF is the equipment obtaining the gamma ray spectrum from irradiated fuels. This equipment could afford the useful data relating spent fuels like as burn-up measurements. We describe the specifications of the equipment and its accessories, and also described its operation procedure so that an operator can use this report as the operation procedure. (author). 1 tab., 11 figs., 11 refs

  19. Lymphocytic subsets in occupationally exposed persons

    International Nuclear Information System (INIS)

    Tuschl, H.; Kovac, R.; Wottawa, A.

    1989-04-01

    The percentage of CD2, CD4, CD8 and NK cells of peripheral blood was investigated in persons occupationally exposed to very low doses of ionizing radiation. Investigations were carried out by monoclonal antibodies and flow-cytometry. While significant effects of age and smoking habits on the relative number of CD8 cells and CD4/CD8 ratios could be established, no influence of the very low radiation exposure on the profile of lymphocytic cells in blood was found, except a very slight effect on the relative number of total T cells (= CD2 cells). 7tabs., 2figs., 16refs. (Author)

  20. Scanning unit for collectrons

    International Nuclear Information System (INIS)

    Plaige, Yves.

    1976-01-01

    This invention concerns a measurement scanning assembly for collectron type detectors. It is used in measuring the neutron flux in nuclear reactors. As the number of these detectors in a reactor can be very great, they are not usually all connected permanently to the measuring facility but rather in turn by means of a scanning device which carries out, as it were, multiplexing between all the collectrons and the input of a single measuring system. The object of the invention is a scanning assembly which is of relative simplicity through an original organisation. Specifically, according to this organisation, the collectrons outputs are grouped together in bunches, each of these bunches being processed by a multiplexing sub-assembly belonging to a first stage, the different outputs of these multiplexing subassemblies of this first stage being grouped together yet again in bunches processed by multiplexors forming a new stage and so forth. Further, this structure is specially adapted for use with collectrons by utilising a current amplifier at each multiplexing level so that from one end to the other of the multiplexing system, the commutations are carried out on currents and not on voltages [fr

  1. Forensic Scanning Electron Microscope

    Science.gov (United States)

    Keeley, R. H.

    1983-03-01

    The scanning electron microscope equipped with an x-ray spectrometer is a versatile instrument which has many uses in the investigation of crime and preparation of scientific evidence for the courts. Major applications include microscopy and analysis of very small fragments of paint, glass and other materials which may link an individual with a scene of crime, identification of firearms residues and examination of questioned documents. Although simultaneous observation and chemical analysis of the sample is the most important feature of the instrument, other modes of operation such as cathodoluminescence spectrometry, backscattered electron imaging and direct x-ray excitation are also exploited. Marks on two bullets or cartridge cases can be compared directly by sequential scanning with a single beam or electronic linkage of two instruments. Particles of primer residue deposited on the skin and clothing when a gun is fired can be collected on adhesive tape and identified by their morphology and elemental composition. It is also possible to differentiate between the primer residues of different types of ammunition. Bullets may be identified from the small fragments left behind as they pass through the body tissues. In the examination of questioned documents the scanning electron microscope is used to establish the order in which two intersecting ink lines were written and to detect traces of chemical markers added to the security inks on official documents.

  2. Education and Occupational Outcomes

    DEFF Research Database (Denmark)

    Johnes, Geraint; Freguglia, Ricardo; Spricigo, Gisele

    2016-01-01

    Purpose: The purpose of this paper is to examine the dynamic relationship between policies related to educational provision and both educational participation and occupational outcomes in Brazil, using PNAD and RAIS-Migra data. Design/methodology/approach: Outcomes are examined using: static...... multinomial logit analysis, and structural dynamic discrete choice modelling. The latter approach, coupled with the quality of the RAIS-Migra data source, allows the authors to evaluate the education policy impacts over time. Findings: The main results show that the education level raises the propensity...... that the individual will be in formal sector work or still in education, and reduces the probability of the other outcomes. Transition into non-manual formal sector work following education may, however, occur via a spell of manual work. Originality/value: This is the first study of occupational destination...

  3. Occupational dose constraint

    International Nuclear Information System (INIS)

    Heilbron Filho, Paulo Fernando Lavalle; Xavier, Ana Maria

    2005-01-01

    The revision process of the international radiological protection regulations has resulted in the adoption of new concepts, such as practice, intervention, avoidable and restriction of dose (dose constraint). The latter deserving of special mention since it may involve reducing a priori of the dose limits established both for the public and to individuals occupationally exposed, values that can be further reduced, depending on the application of the principle of optimization. This article aims to present, with clarity, from the criteria adopted to define dose constraint values to the public, a methodology to establish the dose constraint values for occupationally exposed individuals, as well as an example of the application of this methodology to the practice of industrial radiography

  4. Occupational safety motivation

    DEFF Research Database (Denmark)

    Pedersen, Louise; Kines, Pete

    2010-01-01

    Background: Motivation is one of the most important factors for safety behaviour and for implementing change in general. However, theoretical and psychometric studies of safety performance have traditionally treated safety motivation, safety compliance and safety participation unidimensionally....... At the same time many motivation questionnaire items are seldom founded on theory and/or do not account for the theories’ ontological and epistemological differences, e.g. of how knowledge, attitude and action are related. Present questionnaire items tap into occupational safety motivation in asking whether...... or not respondents ‘are’ motivated and whether they feel that safety is important or worthwhile. Another important aspect is ‘what’ motivates workers to comply to and participate in safety. The aim of this article is to introduce a new theory-based occupational safety motivation scale which is validated...

  5. Embracing Creativity in Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Lydia Royeen, MOT, OTR/L

    2015-01-01

    Full Text Available Jen Gash, an occupational therapist and creativity coach living in the UK, provided the cover art for the winter 2015 issue of The Open Journal of Occupational Therapy. The picture is titled “Over the Exe.” Jen uses her inspiration of the Kawa River model in this painting. The painting is of her husband and daughter standing where the river meets the sea. This is a metaphoric representation of rejoining the greater collective. In addition, Jen has a passion for occupational therapists to encompass creativity. A core aspect of occupational therapy is the multi-dimensional concept of occupations; it allows for occupational therapists to incorporate creativity into daily practice. Jen’s goal is for occupational therapy to embrace its creative theoretical roots.

  6. Perspective on occupational mortality risks

    International Nuclear Information System (INIS)

    Cohen, B.L.

    1981-01-01

    Occupational risks to radiation workers are compared with other occupational risks on the basis of lost life expectancy (LLE) in a full working lifetime. Usual comparisons with National Safety Council accident death statistics for various industry categories are shown to be unfair because the latter average over a variety of particular industries and occupations within each industry. Correcting for these problems makes some common occupations in some industries 20-50 times more dangerous due to accidents alone than being a radiation worker. If more exposed subgroups of radiation workers are compared with more dangerous subgroups of other occupations, these ratios are maintained. Since radiation causes disease rather than acute injury, a wide range effort is made to estimate average loss of life expectancy from occupational disease; the final estimate for this is 500 days. The average American worker loses more than an order of magnitude more life expectancy from occupational disease than the average radiation worker loses from radiation induced cancer. (author)

  7. Occupational open globe injuries.

    Science.gov (United States)

    Vasu, U; Vasnaik, A; Battu, R R; Kurian, M; George, S

    2001-03-01

    Occupational ocular trauma is an important cause of acquired monocular blindness in a rapidly industrialising country like India. Knowledge of the epidemiology of occupational eye injuries is essential to formulate viable industrial safety measures. We retrospectively reviewed all patients with occupational open globe injuries between 1994 and 1998. We documented the circumstances of the injuries, their clinical findings and the use of appropriate protective eyewear at the time of the injury. The visual acuity 6 months after the injury was the final outcome measure. In this study period we examined 43 patients with open globe injuries sustained at the work place. Thirty-four (79.1%) patients were young males. The iron and steel industry accounted for 19 (44.2%) cases while 8 (18.6%) patients each were from the agricultural, mining and other small scale industrial sectors. At the time of the injury, 33 (76.7%) were not wearing the recommended protective eyewear and 6 (13.9%) were under the influence of alcohol. The injuries were mild in 6 (13.9%), moderate in 18 (41.9%) and severe in 19 (44.2%) patients. At the end of 6 months, 2 (4.7%) patients had a visual acuity of 6/12 or better, 4 (9.3%) had a visual acuity of 6/18 to 6/60 and 29 (67.4.%) had a vision of eyewear and alcohol-free environment at the work place is likely to reduce the incidence of severe occupational open globe injuries.

  8. PREVENTION OF OCCUPATIONAL ACCIDENTS

    Directory of Open Access Journals (Sweden)

    Jovica Jovanovic

    2004-01-01

    Full Text Available Medical services, physicians and nurses play an essential role in the plant safety program through primary treatment of injured workers and by helping to identify workplace hazards. The physician and nurse should participate in the worksite investigations to identify specific hazard or stresses potentially causing the occupational accidents and injuries and in planning the subsequent hazard control program. Physicians and nurses must work closely and cooperatively with supervisors to ensure the prompt reporting and treatment of all work related health and safety problems. Occupational accidents, work related injuries and fatalities result from multiple causes, affect different segments of the working population, and occur in a myriad of occupations and industrial settings. Multiple factors and risks contribute to traumatic injuries, such as hazardous exposures, workplace and process design, work organization and environment, economics, and other social factors. With such a diversity of theories, it will not be difficult to understand that there does not exist one single theory that is considered right or correct and is universally accepted. These theories are nonetheless necessary, but not sufficient, for developing a frame of reference for understanding accident occurrences. Prevention strategies are also varied, and multiple strategies may be applicable to many settings, including engineering controls, protective equipment and technologies, management commitment to and investment in safety, regulatory controls, and education and training. Research needs are thus broad, and the development and application of interventions involve many disciplines and organizations.

  9. AIDS and Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Ruiz Garrós, MC

    2004-12-01

    Full Text Available "When my first hospitalization took place, I must recognize I was plunged into the mistake of identifying AIDS with death, together with the depression, uneasiness, unsecurity and the feeling of inability to plan my life in the short and long term to the point of refusing in my mind to organize things as simple as future holidays or improvements at home".Thanks to retroviral treatments, the initially mortal HIV/AIDS infection has become a chronic disease as it can be today thediabetes, allowing objectives in the short, medium and long term. Here is where the occupational therapy operates as an instrument to improve, keep or rehabilitate the occupational areas of this group which has a series of special features to be borne in mind when working with them.I seek to reflect my 8 months experience working as an occupational therapist in a Refuge Centre for AIDS ill people, and how throughout this experience I changed several of my initial approaches and working methods too.

  10. Occupational Health in Mountainous Kyrgyzstan.

    Science.gov (United States)

    Dzhusupov, Kenesh O; Colosio, Claudio; Tabibi, Ramin; Sulaimanova, Cholpon T

    2015-01-01

    In the period of transition from a centralized economy to the market economy, occupational health services in Kyrgyzstan have survived through dramatic, detrimental changes. It is common for occupational health regulations to be ignored and for basic occupational health services across many industrial enterprises and farms to be neglected. The aim of this study was to demonstrate the present situation and challenges facing occupational health services in Kyrgyzstan. The transition from centralized to the market economy in Kyrgyzstan has led to increased layoffs of workers and unemployment. These threats are followed by increased workload, and the health and safety of workers becomes of little concern. Private employers ignore occupational health and safety; consequently, there is under-reporting of occupational diseases and accidents. The majority of enterprises, especially those of small or medium size, are unsanitary, and the health status of workers remains largely unknown. The low official rates of occupational diseases are the result of data being deliberately hidden; lack of coverage of working personnel by medical checkups; incompetent management; and the poor quality of staff, facilities, and equipment. Because Kyrgyzstan is a mountainous country, the main environmental and occupational factor of enterprises is hypoxia. Occupational health specialists have greatly contributed to the development of occupational medicine in the mountains through science and practice. The enforcement of existing strong occupational health legislation and increased financing of occupational health services are needed. The maintenance of credible health monitoring and effective health services for workers, re-establishment of medical services and sanitary-hygienic laboratories in industrial enterprises, and support for scientific investigations on occupational risk assessment will increase the role of occupational health services in improving the health of the working population

  11. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  12. Vacuum scanning capillary photoemission microscopy.

    Science.gov (United States)

    Aseyev, S A; Cherkun, A P; Mironov, B N; Petrunin, V V; Chekalin, S V

    2017-08-01

    We demonstrate the use of a conical capillary in a scanning probe microscopy for surface analysis. The probe can measure photoemission from a substrate by transmitting photoelectrons along the capillary as a function of probe position. The technique is demonstrated on a model substrate consisting of a gold reflecting layer on a compact disc which has been illuminated by an unfocused laser beam with a wavelength 400nm, from a femtosecond laser with a beam size of 4mm. A quartz capillary with a 2-µm aperture has been used in the experiments. The period of gold microstructure, shown to be 1.6µ, was measured by the conical probe operating in shear force mode. In shear force regime, the dielectric capillary has been used as a "classical" SPM tip, which provided images reflecting the surface topology. In a photoelectron regime photoelectrons passed through hollow tip and entered a detector. The spatial distribution of the recorded photoelectrons consisted of periodic mountain-valley strips, resembling the surface profile of the sample. Submicron spatial resolution has been achieved. This approach paves the way to study pulsed photodesorption of large organic molecular ions with high spatial and element resolution using the combination of a hollow-tip scanner with time-of-flight technique. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Occupational stress among police personnel in India

    Directory of Open Access Journals (Sweden)

    G Ragesh

    2017-06-01

    Full Text Available Background: Occupational stress and associated physical and mental health related issues are not addressed in Indian police personnel with adequate importance. Methods: Cross-sectional survey was conducted among police personnel (both male and female in Calicut urban police district, Kerala state, India. Police personnel from all designations (ranks, except from the all India services (Indian Police Service were included in the study. Data were collected using a specifically designed datasheet covering socio-demographic profile, physical and mental health related details which was prepared by researchers. Occupational stress was measured using Operational Police Stress Questionnaire (PSQ-OP and Organisational Police Stress Questionnaire (PSQ-ORG. Result: The study found that both operational and organisational stress was significant among the police officers. Organisational stress was experienced in moderate level by 68% and in high level by 14%. Operational stress scores were in the moderate range in 67% and in high range in 16.5%. The younger age group (21-35 years and lower level rank police personnel had higher stress. Stress was higher among female police personnel compared to males. While 23% of them had been diagnosed with physical illnesses, a significant four per cent of them with mental illness, and 29% of them reported substance abuse. Conclusion: The results point to the high level of stress among Indian police personnel and the need for urgent interventions from the government to address the occupational stress.

  14. Methodological exploratory study applied to occupational epidemiology

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: janetegc@ipen.br

    2007-07-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  15. Methodological exploratory study applied to occupational epidemiology

    International Nuclear Information System (INIS)

    Carneiro, Janete C.G. Gaburo; Vasques, MOnica Heloisa B.; Fontinele, Ricardo S.; Sordi, Gian Maria A.

    2007-01-01

    The utilization of epidemiologic methods and techniques has been object of practical experimentation and theoretical-methodological reflection in health planning and programming process. Occupational Epidemiology is the study of the causes and prevention of diseases and injuries from exposition and risks in the work environment. In this context, there is no intention to deplete such a complex theme but to deal with basic concepts of Occupational Epidemiology, presenting the main characteristics of the analysis methods used in epidemiology, as investigate the possible determinants of exposition (chemical, physical and biological agents). For this study, the social-demographic profile of the IPEN-CNEN/SP work force was used. The knowledge of this reference population composition is based on sex, age, educational level, marital status and different occupations, aiming to know the relation between the health aggravating factors and these variables. The methodology used refers to a non-experimental research based on a theoretical methodological practice. The work performed has an exploratory character, aiming a later survey of indicators in the health area in order to analyze possible correlations related to epidemiologic issues. (author)

  16. Automatic Ultrasound Scanning

    DEFF Research Database (Denmark)

    Moshavegh, Ramin

    on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...... on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...

  17. Radiographic scanning agent

    International Nuclear Information System (INIS)

    Bevan, J.A.

    1983-01-01

    This invention relates to radiodiagnostic agents and more particularly to a composition and method for preparing a highly effective technetium-99m-based bone scanning agent. One deficiency of x-ray examination is the inability of that technique to detect skeletal metastases in their incipient stages. It has been discovered that the methanehydroxydiphosphonate bone mineral-seeking agent is unique in that it provides the dual benefits of sharp radiographic imaging and excellent lesion detection when used with technetium-99m. This agent can also be used with technetium-99m for detecting soft tissue calcification in the manner of the inorganic phosphate radiodiagnostic agents

  18. Spinal CT scan, 1

    International Nuclear Information System (INIS)

    Nakagawa, Hiroshi

    1982-01-01

    Methods of CT of the cervical and thoracic spines were explained, and normal CT pictures of them were described. Spinal CT was evaluated in comparison with other methods in various spinal diseases. Plain CT revealed stenosis due to spondylosis or ossification of posterior longitudinal ligament and hernia of intervertebral disc. CT took an important role in the diagnosis of spinal cord tumors with calcification and destruction of the bone. CT scan in combination with other methods was also useful for the diagnosis of spinal injuries, congenital anomalies and infections. (Ueda, J.)

  19. Scanning apparatus and method

    International Nuclear Information System (INIS)

    Brunnett, C.J.

    1980-01-01

    A novel method is described for processing the analogue signals from the photomultiplier tubes in a tomographic X-ray scanner. The system produces a series of pulses whose instantaneous frequency depends on the detected intensity of the X-radiation. A timer unit is used to determine the segment scan intervals and also to deduce the average radiation intensity detected during this interval. The overall system is claimed to possess the advantageous properties of low time delay, wide bandwidth and relative low cost. (U.K.)

  20. Wide-scan dielectric dome antenna with reduced profile

    NARCIS (Netherlands)

    Gandini, E.; Silvestri, F.; Benini, A.; Gerini, G.; Martini, E.; Maci, S.; Viganò, M.C.; Toso, G.; Monni, S.

    2017-01-01

    In this contribution, a dielectric dome antenna design in Ka-band is presented. The dome antenna is based on the combination of a phased array and a dielectric lens. The goal of the combination of these structures is to enlarge the field of view of the antenna. In particular, the array is considered

  1. NEW SCANNING DEVICE FOR SCANNING TUNNELING MICROSCOPE APPLICATIONS

    NARCIS (Netherlands)

    SAWATZKY, GA; Koops, Karl Richard

    A small, single piezo XYZ translator has been developed. The device has been used as a scanner for a scanning tunneling microscope and has been tested successfully in air and in UHV. Its simple design results in a rigid and compact scanning unit which permits high scanning rates.

  2. Ultrafast scanning tunneling microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Botkin, D.A. [California Univ., Berkeley, CA (United States). Dept. of Physics]|[Lawrence Berkeley Lab., CA (United States)

    1995-09-01

    I have developed an ultrafast scanning tunneling microscope (USTM) based on uniting stroboscopic methods of ultrafast optics and scanned probe microscopy to obtain nanometer spatial resolution and sub-picosecond temporal resolution. USTM increases the achievable time resolution of a STM by more than 6 orders of magnitude; this should enable exploration of mesoscopic and nanometer size systems on time scales corresponding to the period or decay of fundamental excitations. USTM consists of a photoconductive switch with subpicosecond response time in series with the tip of a STM. An optical pulse from a modelocked laser activates the switch to create a gate for the tunneling current, while a second laser pulse on the sample initiates a dynamic process which affects the tunneling current. By sending a large sequence of identical pulse pairs and measuring the average tunnel current as a function of the relative time delay between the pulses in each pair, one can map the time evolution of the surface process. USTM was used to measure the broadband response of the STM`s atomic size tunnel barrier in frequencies from tens to hundreds of GHz. The USTM signal amplitude decays linearly with the tunnel junction conductance, so the spatial resolution of the time-resolved signal is comparable to that of a conventional STM. Geometrical capacitance of the junction does not appear to play an important role in the measurement, but a capacitive effect intimately related to tunneling contributes to the measured signals and may limit the ultimate resolution of the USTM.

  3. European Union Sustainable Purchasing Guidance Profile

    Science.gov (United States)

    To help you find the resource that is right for your organization, EPA conducted a scan of the landscape and developed summary profiles of some of the leading sources of sustainable purchasing guidance around the globe.

  4. Responsible Purchasing Network - Sustainable Purchasing Guidance Profile

    Science.gov (United States)

    To help you find the resource that is right for your organization, EPA conducted a scan of the landscape and developed summary profiles of some of the leading sources of sustainable purchasing guidance around the globe.

  5. International Green Purchasing Network - Sustainable Purchasing Profile

    Science.gov (United States)

    To help you find the resource that is right for your organization, EPA conducted a scan of the landscape and developed summary profiles of some of the leading sources of sustainable purchasing guidance around the globe.

  6. Karolinske psychodynamic profile (KAPP)

    DEFF Research Database (Denmark)

    Mathiesen, Birgit Bork; Søgaard, Ulf

    2006-01-01

    psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil......psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil...

  7. Prevalence of occupational disease

    Energy Technology Data Exchange (ETDEWEB)

    Newhouse, M.L.

    1976-12-01

    When discussing the prevalence of occupational disease, both the prescribed diseases and the diseases where occupation has an important etiological component should be considered. Available statistics indicate that there has been a substantial improvement in the control of important prescribed diseases such as lead poisoning and pneumoconiosis. In the United Kingdom in 1900 there were 1000 cases of lead poisoning with 38 fatalities. This number decreased to 49 cases in 1956 when the number again increased due to a change from clinical diagnosis to diagnosis on biochemical evidence. The number of cases of coal workers' pneumoconiosis has declined since the 1950s but the number of coal miners has also been reduced by more than /sup 1///sub 3/. Industrial dermatitis is still a considerable problem. Vibration induced white fingers was mentioned as a disease with a very large occupational component but which for a variety of reasons is not prescribed for industrial injury benefit. Illnesses due to injuries to the back, to sciatica, disc disease or lumbago cause a very large amount of sickness and are often associated with heavy manual labor particularly if an awkward posture has to be adopted for the job. The average absence after a back injury in the London Docks was 61 days. Chronic bronchitis is the biggest single cause of sickness absence. Many studies have shown that the etiology is multifactorial but that hard physical work and a dusty environment in the work place are important adverse factors. Improved control of the working environment and methods of work may influence the development of chronic disease in the older worker.

  8. Accompanied consultations in occupational health.

    Science.gov (United States)

    Hobson, J; Hobson, H; Sharp, R

    2016-04-01

    Accompanied consultations are often reported as difficult by occupational physicians but have not been studied in the occupational health setting. To collect information about accompanied consultations and the impact of the companion on the consultation. We collected data on all accompanied consultations by two occupational physicians working in a private sector occupational health service over the course of 16 months. Accompanied consultations were matched to non-accompanied consultations for comparison. We collected data on 108 accompanied consultations. Accompanied consultations were more likely to be connected with ill health retirement (P Occupational health practitioners may benefit from better understanding of accompanied consultations and guidance on their management. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  9. Gentrification and Occupancy Rights

    DEFF Research Database (Denmark)

    Huber, Jakob; Wolkenstein, Gregor Fabio

    2018-01-01

    What, if anything, is wrong with gentrification? This paper addresses this question from the perspective of normative political theory. We argue that gentrification is a wrong insofar as it involves a violation of city-dwellers occupancy rights. We distinguish these rights from other forms...... of territorial rights, and discuss the different implications of the argument for urban governance. If we agree on the ultimate importance of being able to pursue one’s located life-plans, the argument goes, we must also agree on limiting the impact on gentrification on people’s lives. Limiting gentrification...

  10. Gentrification and Occupancy Rights

    DEFF Research Database (Denmark)

    Huber, Jakob; Wolkenstein, Fabio

    2018-01-01

    What, if anything, is wrong with gentrification? This paper addresses this question from the perspective of normative political theory. We argue that gentrification is a wrong insofar as it involves a violation of city-dwellers occupancy rights. We distinguish these rights from other forms...... of territorial rights, and discuss the different implications of the argument for urban governance. If we agree on the ultimate importance of being able to pursue one’s located life-plans, the argument goes, we must also agree on limiting the impact on gentrification on people’s lives. Limiting gentrification’s...... impact, however, does not entail halting processes of gentrification once and for all....

  11. Resilience: a transversal occupational skill for current organizations

    Directory of Open Access Journals (Sweden)

    María del Rosario Piñeros-Botero

    2013-12-01

    some studies related to deal the resilience from the transverse occupational skills and the MCclelland approach TO KNOW TO BE AND TO KNOW TO DO, as a structural base for behavior and performance of people. Finally we propose an organizational resilience model that presents its functionality and categorization of profiles in occupational and individual skills that allow encouraging cultural and organizational behavior by means of optimization strategies to current organizations. The term organizations, is going to be used to talk about an industry or enterprise of any kind or financial sector.

  12. Scanning device for a spectrometer

    International Nuclear Information System (INIS)

    Ignat'ev, V.M.

    1982-01-01

    The invention belongs to scanning devices and is intended for spectrum scanning in spectral devices. The purpose of the invention is broadening of spectral scanning range. The device construction ensures the spectrum scanning range determined from revolution fractions to several revolutions of the monochromator drum head, any number of the drum head revolutions determined by integral number with addition of the drum revolution fractions with high degree of accuracy being possible

  13. Occupational exposure to ionizing radiation

    International Nuclear Information System (INIS)

    Snihs, J.O.

    1985-01-01

    An overview of occupational exposure is presented. Concepts and quantities used for radiation protection are explained as well as the ICRP system of dose limitation. The risks correlated to the limits are discussed. However, the actual exposure are often much lower than the limits and the average risk in radiation work is comparable with the average risk in other safe occupations. Actual exposures in various occupations are presented and discussed. (author)

  14. Occupational cancer. 4. enlarged ed.

    International Nuclear Information System (INIS)

    Butz, M.

    1991-01-01

    In the fourth, supplementary edition work related cancer illnesses which from 1978 to 1990 were recognized by the Industrial Professional Associations as occupational diseases are described. This covers: Type of occupational disease, organs affected, causal substances, hazardous professions. In addition, for every occupational-disease, detailed data are presented, e.g. latency periods and ages at death. 16 carcinogenic substances and substance classes are considered in this catalogue including ionizing radiation. (orig./MG) [de

  15. Factors influencing bone scan quality

    International Nuclear Information System (INIS)

    Adams, F.G.; Shirley, A.W.

    1983-01-01

    A reliable subjective method of assessing bone scan quality is described. A large number of variables which theoretically could influence scan quality were submitted to regression and factor analysis. Obesity, age, sex and abnormality of scan were found to be significant but weak variables. (orig.)

  16. [News on occupational contact dermatitis].

    Science.gov (United States)

    Crépy, Marie-Noëlle; Bensefa-Colas, Lynda

    2014-03-01

    Contact dermatitis--irritant contact dermatitis, allergic contact dermatitis and protein contact dermatitis--are the most common occupational skin diseases, most often localized to the hands. Contact urticaria is rarer The main occupational irritants are wet work, detergents and disinfectants, cutting oils, and solvents. The main occupational allergens are rubber additives, metals (chromium, nickel, cobalt), plastics (epoxy resins, acrylic), biocides and plants. Diagnosis is based on clinical examination, medical history and allergy testing. For a number of irritating or sensitizing agents, irritant or allergic dermatitis can be notified as occupational diseases. The two main prevention measures are reducing skin contact with irritants and complete avoidance of skin contact with offending allergens.

  17. CT scans in encephalitis

    International Nuclear Information System (INIS)

    Imanishi, Masami; Morimoto, Tetsuya; Iida, Noriyuki; Hisanaga, Manabu; Kinugawa, Kazuhiko

    1980-01-01

    Generally, CT scans reveal a decrease in the volume of the ventricular system, sylvian fissures and cortical sulci in the acute stage of encephalitis, and softening of the cerebral lobes with dilatation of the lateral ventricles and subarachnoidian dilated spaces in the chronic stage. We encountered three cases of encephalitis: mumps (case 1), herpes simplex (case 2), and syphilis (case 3). In case 1, brain edema was seen in the acute stage and brain atrophy in the chronic stage. In case 2, necrosis of the temporal pole, which is pathognomonic in herpes simplex encephalitis, was recognized. And in case 3, multiple lesions whose CT appearance was enhanced by contrast materials were found scattered over the whole brain. These lesions were diagnosed as inflammatory granuloma by histological examination. (author)

  18. Scanning device for scintigraphy

    International Nuclear Information System (INIS)

    Casale, R.

    1975-01-01

    A device is described for the scintigraphic scanning according to a horizontal plane, comprising: (a) A support provided with two guides horizontally and longitudinally located, one of which is located in the upper part of the support, while the second guide is located in the lower part of the support; (b) A carriage, movable with respect to the support along the two guides, provided in its upper part, projecting above the support, with rolling means suitable to support and to cause to slide along its axis a support rod for the first detector, horizontally and transversely located, said carriage being further provided in its lower part with a recess with possible rolling means suitable to support and to cause to slide along its axis a second support rod for the second detector, said second rod being located parallel to the first rod and below it; (c) One or two support rods for the detectors, the first of said rods being supported above the support in a sliding way along its axis, by the rolling means located in the upper part of the carriage, and the second rod if present is supported slidingly along its axis by the possible rolling means contained in the suitable recess which is provided in the lower part of the carriage, and (d) A vertical shaft supported by said carriage on which is mounted a toothed wheel for each rod, each toothed wheel engaging a positive drive belt or the like, which is connected to each said rod so that rotation of the shaft determines the simultaneous displacement of the two rods along their axes; and single motor means for driving said shaft during a scanning operation. (U.S.)

  19. Scanning the periphery.

    Science.gov (United States)

    Day, George S; Schoemaker, Paul J H

    2005-11-01

    Companies often face new rivals, technologies, regulations, and other environmental changes that seem to come out of left field. How can they see these changes sooner and capitalize on them? Such changes often begin as weak signals on what the authors call the periphery, or the blurry zone at the edge of an organization's vision. As with human peripheral vision, these signals are difficult to see and interpret but can be vital to success or survival. Unfortunately, most companies lack a systematic method for determining where on the periphery they should be looking, how to interpret the weak signals they see, and how to allocate limited scanning resources. This article provides such a method-a question-based framework for helping companies scan the periphery more efficiently and effectively. The framework divides questions into three categories: learning from the past (What have been our past blind spots? What instructive analogies do other industries offer? Who in the industry is skilled at picking up weak signals and acting on them?); evaluating the present (What important signals are we rationalizing away? What are our mavericks, outliers, complainers, and defectors telling us? What are our peripheral customers and competitors really thinking?); and envisioning the future (What future surprises could really hurt or help us? What emerging technologies could change the game? Is there an unthinkable scenario that might disrupt our business?). Answering these questions is a good first step toward anticipating problems or opportunities that may appear on the business horizon. The article concludes with a self-test that companies can use to assess their need and capability for peripheral vision.

  20. [Drugs and occupational accident].

    Science.gov (United States)

    Bratzke, H; Albers, C

    1996-02-01

    In a case of a fatal occupational accident (construction worker, fall from roof, urine test positive for cocaine and THC, e.g. cannabis) the question arised to what extent those drug-related occupational accidents occur. In the literature only few cases, mainly dealing with cannabis influence, have been reported, however, a higher number is suspected. Cocaine and other stimulating drugs (amphetamine) are more often used to increase physical fitness. By direct or indirect interference with vigilance these compounds may provoke accidents. Due to the lack of a legal basis proving of the influence of drugs at the working place is still very limited, although highly sensitive chemical-toxicological assay procedures are available to detect even the chronic abuse (in hair). In the general conditions of accident insurances a compensation is excluded when alcohol is involved, but drugs are not mentioned. It is indeed difficult to establish a concentration limit for drugs like that existing for alcohol (1.1%). In each case the assay of the drug involved and exact knowledge of its specific effects is in an essential prerequisite to prove the causal relationship.

  1. Distillation columns inspection through gamma scanning

    International Nuclear Information System (INIS)

    Garcia, Marco

    1999-09-01

    The application of nuclear energy is very wide and it allows the saving of economic resources since the investigation of a certain process is carried out without stop the plant. The gamma scanning of oil c racking c olumns are practical examples, they allow to determine the hydraulic operation of the inspected columns. A source of Co-60 22mCi and a detector with a crystal of INa(TI) are used. This paper shows the results got from a profile carried out in a column distillation

  2. The effect of occupational meaningfulness on occupational commitment

    Directory of Open Access Journals (Sweden)

    Itai Ivtzan

    2014-11-01

    Full Text Available Existing research lacks a scholarly consensus on how to define and validly measure ‘meaningful work’ (e.g., Rosso, Dekas & Wrzesniewski, 2010. The following correlational study highlights the value of investigating meaningfulness in the context of occupational commitment. The study hypothesizes that occupational commitment is positively correlated with occupational meaningfulness, where meaningfulness is defined as the extent to which people’s occupations contribute to personal meaning in life. One-hundred and fifty-six full-time office based UK workers completed an online questionnaire including 18 questions measuring levels of occupational commitment (Meyer, Allen & Smith, 1993, in addition to six novel items measuring occupational meaningfulness. The results supported the hypothesis and also showed that the affective sub-type of occupational commitment had the highest correlation with occupational meaningfulness. Such results exhibit the importance of finding meaning at work, as well as the relevance of this to one’s level of commitment to his or her job. This paper argues that individuals should consider OM before choosing to take a specific role, whereas organizations ought to consider the OM of their potential candidates before recruiting them into a role. Possible directions for future research directions are also discussed.

  3. Occupational Mental Health, Labor Accidents and Occupational Diseases

    Science.gov (United States)

    Naveillan, F. Pedro

    1973-01-01

    The article discusses the relationship between mental health and labor accidents as it pertains to accident prevention, treatment of accident victims, and their rehabilitation. It also comments briefly on mental health and occupational diseases and the scope of the field of occupational mental health from a Chilean perspective. (AG)

  4. Occupation and the relevance of primatology to occupational therapy.

    Science.gov (United States)

    Wood, W

    1993-06-01

    The adaptive functions of occupation during the phylogenetic history of the human species and the ontogenetic development of individual primates re examined through a review of relevant research of wild and captive nonhuman primates. This review suggests that the effectiveness of occupation as a therapeutic medium throughout life span development is fundamentally tied to humankind's phylogenetic history. It is accordingly argued that there is considerable justification to maintain occupational therapy's historical commitment to therapeutic occupation as the profession's primary treatment modality. To support this commitment, questions to guide practice and research are identified that emanate from the primate literature and that are highly germane to the therapeutic process in occupational therapy. These questions address: (a) the relationship between the press of the various environments in which occupational therapists practice and subsequent opportunities availed to patients for engagement in occupation; (b) the relationship between the extent to which patients are or are not empowered to exert real control over their use of time and their eventual development of disabling conditions; and (c) the therapeutic efficacy of occupation as compared with other treatment approaches that are not comparably holistic.

  5. Social and Occupational Integration of Disadvantaged People. Leonardo da Vinci Good Practices Series.

    Science.gov (United States)

    Commission of the European Communities, Brussels (Belgium). Directorate-General for Education and Culture.

    This document profiles nine European programs that exemplify good practice in social and occupational integration of disadvantaged people. The programs profiled are as follows: (1) Restaurant Venezia (a CD-ROM program to improve the reading and writing skills of young people in Luxembourg who have learning difficulties); (2) an integrated…

  6. [Skin cancer as occupational disease].

    Science.gov (United States)

    Bauer, A

    2016-11-01

    The incidence of epithelial skin neoplasms, such as squamous cell carcinoma and basal cell carcinoma is significantly increasing worldwide. Leisure time solar UV exposure is causative in the overwhelming majority of cases in the general population; however, occupational exposure is responsible for a certain percentage of cases. Employees with a relevant exposure to polycyclic aromatic hydrocarbons in soot, raw paraffin, coal tar, anthracene, pitch or similar substances, to sunlight in outdoor occupations as well as to arsenic and ionizing radiation have a significantly increased risk to develop occupational skin cancer compared to the general population. In the official occupational disease list in the appendix of the German by-law on occupational diseases, the following occupational diseases concerning skin cancer are listed: BK 5102 "skin cancer and carcinoma in situ caused by soot, raw paraffin, coal tar, anthracene, pitch or similar substances" (e.g. various solid paraffins, asphalt and mazut as well as mineral oils, grease, cylinder and drilling oils), BK 5103 "squamous cell carcinoma or multiple actinic keratosis caused by natural UV radiation", BK 1108 "diseases caused by arsenic and its compounds" and BK 2402 "diseases caused by ionizing radiation". For further occupational exposure to carcinogenic substances and potential occupationally acquired skin tumors, no official lists are currently available. These cancers might be considered under a special opt out paragraph in the German Social Law (§ 9 para 2 SGB VII). Tumors in scars after occupational skin trauma or occupational burns are compensated as consequences of work accidents. The current official list of occupational skin cancers and new developments for expert opinions are described in this article.

  7. Meta-modeling of occupancy variables and analysis of their impact on energy outcomes of office buildings

    International Nuclear Information System (INIS)

    Wang, Qinpeng; Augenbroe, Godfried; Kim, Ji-Hyun; Gu, Li

    2016-01-01

    Highlights: • A meta-analysis framework for a stochastic characterization of occupancy variables. • Sensitivity ranking of occupancy variability against all other sources of uncertainty. • Sensitivity of occupant presence for building energy consumption is low. • Accurate mean knowledge is sufficient for predicting building energy consumption. • Prediction of peak demand behavior requires stochastic occupancy modeling. - Abstract: Occupants interact with buildings in various ways via their presence (passive effects) and control actions (active effects). Therefore, understanding the influence of occupants is essential if we are to evaluate the performance of a building. In this paper, we model the mean profiles and variability of occupancy variables (presence and actions) separately. We will use a multi-variate Gaussian distribution to generate mean profiles of occupancy variables, while the variability will be represented by a multi-dimensional time series model, within a framework for a meta-analysis that synthesizes occupancy data gathered from a pool of buildings. We then discuss variants of occupancy models with respect to various outcomes of interest such as HVAC energy consumption and peak demand behavior via a sensitivity analysis. Results show that our approach is able to generate stochastic occupancy profiles, requiring minimum additional input from the energy modeler other than standard diversity profiles. Along with the meta-analysis, we enable the generalization of previous research results and statistical inferences to choose occupancy variables for future buildings. The sensitivity analysis shows that for aggregated building energy consumption, occupant presence has a smaller impact compared to lighting and appliance usage. Specifically, being accumulatively 55% wrong with regard to presence, only translates to 2% error in aggregated cooling energy in July and 3.6% error in heating energy in January. Such a finding redirects focus to the

  8. Metrological large range scanning probe microscope

    International Nuclear Information System (INIS)

    Dai Gaoliang; Pohlenz, Frank; Danzebrink, Hans-Ulrich; Xu Min; Hasche, Klaus; Wilkening, Guenter

    2004-01-01

    We describe a metrological large range scanning probe microscope (LR-SPM) with an Abbe error free design and direct interferometric position measurement capability, aimed at versatile traceable topographic measurements that require nanometer accuracy. A dual-stage positioning system was designed to achieve both a large measurement range and a high measurement speed. This dual-stage system consists of a commercially available stage, referred to as nanomeasuring machine (NMM), with a motion range of 25 mmx25 mmx5 mm along x, y, and z axes, and a compact z-axis piezoelectric positioning stage (compact z stage) with an extension range of 2 μm. The metrological LR-SPM described here senses the surface using a stationary fixed scanning force microscope (SFM) head working in contact mode. During operation, lateral scanning of the sample is performed solely by the NMM. Whereas the z motion, controlled by the SFM signal, is carried out by a combination of the NMM and the compact z stage. In this case the compact z stage, with its high mechanical resonance frequency (greater than 20 kHz), is responsible for the rapid motion while the NMM simultaneously makes slower movements over a larger motion range. To reduce the Abbe offset to a minimum the SFM tip is located at the intersection of three interferometer measurement beams orientated in x, y, and z directions. To improve real time performance two high-end digital signal processing (DSP) systems are used for NMM positioning and SFM servocontrol. Comprehensive DSP firmware and Windows XP-based software are implemented, providing a flexible and user-friendly interface. The instrument is able to perform large area imaging or profile scanning directly without stitching small scanned images. Several measurements on different samples such as flatness standards, nanostep height standards, roughness standards as well as sharp nanoedge samples and 1D gratings demonstrate the outstanding metrological capabilities of the instrument

  9. Ideas for Office Occupations Education.

    Science.gov (United States)

    Alverson, Ruby; And Others

    Prepared by South Carolina office occupations teachers, this booklet contains ideas for effective and motivating teaching methods in office occupations courses on the secondary school level. Besides ideas generally applicable, suggestions are included for teaching the following specific subjects: (1) accounting, (2) recordkeeping, (3) cooperative…

  10. Ageing and occupational safety (abstract)

    NARCIS (Netherlands)

    Venema, A.; Vroome, E.M.M. de

    2008-01-01

    Session 09: New work environment. The aim of this article is to look into the possible effects of an ageing workforce on occupational safety in the Netherlands, and to use this information to draw conclusions about effective age-related staff policy. The article analyzes data on occupational

  11. Spina bifida and parental occupation

    NARCIS (Netherlands)

    Blatter, B.M.

    1997-01-01

    The aims of this thesis were: (1) to identify parental occupations with an increased risk of spina bifida in offspring; (2) to study whether parental occupational exposure to chemicals or radiation during or shortly before pregnancy is a risk factor for the occurrence of spina bifida. In order to

  12. Occupational radiation risk to radiologists

    International Nuclear Information System (INIS)

    Schuettmann, W.

    1981-01-01

    A review is given of the most important publications dealing with attempts to estimate the occupational radiation risk to radiologists by comparing data on their mortality from leukemia and other forms of cancer with respective data for other physicians who were not occupationally exposed to ionizing radiation. (author)

  13. Diagnostic guidlines for occupational epicondylitis

    Directory of Open Access Journals (Sweden)

    Patrycja Krawczyk-Szulc

    2015-07-01

    Full Text Available Making final decisions on the occupational etiology of musculoskeletal diseases is often difficult and problematic at every stage of the diagnostic procedure. Taking into account the need to facilitate decision-making about the causal relationship between the diagnosed disease entity and the working conditions guidelines for the recognition of work-related musculoskeletal diseases have been developed. This paper presents the guidelines for the diagnosis of occupational etiology of humeral epicondylitis, one of the most common occupational disease of the musculoskeletal system in Poland. The developed guidelines have been based on the literature data concerning occupational risk factors of humeral epicondylitis, workload classification, including repetitive movements, awkward postures, and force. Some criteria applied in ergonomic evaluation methods were also included. The presented diagnostic guidelines define approximate benchmarks for stating (after excluding non-occupational etiology that the identified humeral epicondylitis, is related to the way of working. Crucial work factors that should be analyzed include an operating time of movements overloading tendons connecting to the epicondyle, repetition and force used to perform occupational activities. The developed guidelines are aimed to facilitate occupational physicians diagnostic and certification procedures in case of humeral epicondylitis and determination whether there is a likelihood of its occupational etiology. Med Pr 2015;66(3:443–450

  14. Occupational dermatoses from cutting oils

    Energy Technology Data Exchange (ETDEWEB)

    Alomar, A; Conde-Salazar, L; Romaguera, C

    1985-03-01

    230 patients with occupational dermatitis in the metallurgic industry were studied with standard patch test (GEIDC) and an oil series. An occupational and clinical questionnaire survey was carried out. Responses to paraphenylenediamine, chrome, cobalt in the standard series, and benzisothiazolone, triethanolamine, and Grotan BK were the main positive results.

  15. Business Financial Occupations: Skill Standards.

    Science.gov (United States)

    Vocational Technical Education Consortium of States, Decatur, GA.

    This report organizes the information provided by 71 individuals in finance-related occupations in 11 states into skills inventories for persons in these jobs. The skills inventories contain the following sections: (1) occupation-specific knowledge (communication, mathematics, science); (2) workplace behaviors (work ethics, interpersonal…

  16. Relations of occupational stress to occupational class in Japanese civil servants : analysis by two occupational stress models

    OpenAIRE

    Kawaharada, Mariko; Saijo, Yasuaki; Yoshioka, Eiji; Sato, Tetsuro; Sato, Hirokazu; Kishi, Reiko

    2007-01-01

    The aim of the present study was to identify relations between occupational stress and occupational class in Japanese civil servants, using two occupational stress models – the Effort-Reward Imbalance (ERI) Model and the Job Demand-Control (JDC) Model. The subjects were employees of three local public organizations. We distributed self-administered questionnaires and assessed occupational stress by ERI and JDC. We used seven occupational categories based on the Standard Occupational Classific...

  17. The Target Industries: Profiles of Five Hazardous Occupations.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    To contribute to a fuller understanding and awareness of the hazards involved in industries as well as to call attention to steps being taken to solve safety problems, this pamphlet surveys five industries cited among those having the highest rates of job-related injuries in the country. Industries include: (1) Roofing and Sheet Metal, (2)…

  18. GPR scan assessment

    Directory of Open Access Journals (Sweden)

    Abbas M. Abbas

    2015-06-01

    Full Text Available Mekaad Radwan monument is situated in the neighborhood of Bab Zuweila in the historical Cairo, Egypt. It was constructed at the middle XVII century (1635 AD. The building has a rectangle shape plan (13 × 6 m with the longitudinal sides approximately WNW-ESE. It comprises three storages namely; the ground floor; the opened floor (RADWAN Bench and the living floor with a total elevation of 15 m above the street level. The building suffers from severe deterioration phenomena with patterns of damage which have occurred over time. These deterioration and damages could be attributed to foundation problems, subsoil water and also to the earthquake that affected the entire Greater Cairo area in October 1992. Ground Penetrating Radar (GPR scan was accomplished against the walls of the opened floor (RADWAN Bench to evaluate the hazard impact on the walls textures and integrity. The results showed an anomalous feature through the southern wall of RADWAN Bench. A mathematical model has been simulated to confirm the obtained anomaly and the model response exhibited a good matching with the outlined anomaly.

  19. Radionuclide brain scanning

    International Nuclear Information System (INIS)

    Abdel-Dayem, H.

    1992-01-01

    At one stage of medical imaging development, radionuclide brain scanning was the only technique available for imaging of the brain. Advent of CT and MRI pushed it to the background. It regained some of the grounds lost to ''allied advances'' with the introduction of brain perfusion radiopharmaceuticals. Positron emission tomography is a promising functional imaging modality that at present will remain as a research tool in special centres in developed countries. However, clinically useful developments will gradually percolate from PET to SPECT. The non-nuclear imaging methods are totally instrument dependent; they are somewhat like escalators, which can go that far and no further. Nuclear imaging has an unlimited scope for advance because of the new developments in radiopharmaceuticals. As the introduction of a radiopharmaceutical is less costly than buying new instruments, the recent advances in nuclear imaging are gradually perfusing through the developing countries also. Therefore, it is essential to follow very closely PET developments because what is research today might become routine tomorrow

  20. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  1. Gastrointestinal scanning agent

    International Nuclear Information System (INIS)

    Francis, M.D.

    1980-01-01

    An easily prepared radiolabeled gastrointestinal scanning agent is described. Technetium-99m has ideal characteristics for imaging the upper and lower GI tract and determining stomach emptying and intestinal transit time when used with an insoluble particulate material. For example, crystalline and amorphous calcium phosphate particles can be effectively labeled in a one-step process using sup(99m)TcO 4 and SnCl 2 . These labeled particles have insignificant mass and when administered orally pass through the GI tract unchanged, without affecting the handling and density of the intestinal contents. Visualization of the esophageal entry into the stomach, the greater and lesser curvatures of the stomach, ejection into the duodenum, and rates of passage through the upper and lower GI tract are obtained. The slurry of sup(99m)TC particulate can be given rectally by enema. Good images of the cecum and the ascending, transverse, and descending colon are obtained. Mucosal folds and the splenic and hepatic flexures are visualized. The resilience of the large intestine is also readily visualized by pneumocolonographic techniques. (author)

  2. Radionuclide brain scanning

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Dayem, H

    1993-12-31

    At one stage of medical imaging development, radionuclide brain scanning was the only technique available for imaging of the brain. Advent of CT and MRI pushed it to the background. It regained some of the grounds lost to ``allied advances`` with the introduction of brain perfusion radiopharmaceuticals. Positron emission tomography is a promising functional imaging modality that at present will remain as a research tool in special centres in developed countries. However, clinically useful developments will gradually percolate from PET to SPECT. The non-nuclear imaging methods are totally instrument dependent; they are somewhat like escalators, which can go that far and no further. Nuclear imaging has an unlimited scope for advance because of the new developments in radiopharmaceuticals. As the introduction of a radiopharmaceutical is less costly than buying new instruments, the recent advances in nuclear imaging are gradually perfusing through the developing countries also. Therefore, it is essential to follow very closely PET developments because what is research today might become routine tomorrow

  3. An Exploration of the Role of Occupation in School-Based Occupational Therapy Practice

    Science.gov (United States)

    Benson, Jeryl DiSanti

    2010-01-01

    The purpose of this study was to explore the role of occupation in school-based occupational therapy practice. The research questions were (1) How do school-based occupational therapists describe the role of occupation during intervention? (2) Which theories of occupation do school-based occupational therapists associate with their own practice?…

  4. Occupational risk from radiation

    International Nuclear Information System (INIS)

    Schmitz-Feuerhake, I.

    1988-01-01

    In this paper, the author shows that a real and concrete elevation of cancer cases has to be expected in all groups of occupationally irradiated perons. The risk figure one should use for mortality is 0.1% per rem of whole body dose. The mean dose registered for these persons lies well below the maximum permissible dose. In Germany there are about 0.2 rem per year in medical people and below 0.5 rem per year in the nuclear industry. But there are risk groups working in situations with typical higher exposure. In medicine, these are for example nurses working with radium implants in radiotherapy units, technicians doing cardiac catheterization and cholangiogrammes, nurses and physicians holding very young patient during X-ray investigations. In the nuclear industry there are also high level and low level working areas. Highest doses are generally delivered to personnel who are engaged from outside for revision and cleaning procedures

  5. Occupational Animal Allergy.

    Science.gov (United States)

    Stave, Gregg M

    2018-02-16

    This review explores animal allergen exposure in research laboratories and other work settings, focusing on causes and prevention. (1) Consistent with the hygiene hypothesis, there is new evidence that early childhood exposure to pets produces changes in the gut microbiome that likely lead to a lower risk of allergy. (2) Anaphylaxis from laboratory animal bites occurs more frequently than suggested by prior literature. (3) Animal allergens represent an occupational hazard in a wide variety of work settings ranging from fields that work with animals to public settings like schools and public transportation where allergens are brought into or are present in the workplace. Exposure to animal allergens can result in allergy, asthma, and anaphylaxis. Animal allergy has been most studied in the research laboratory setting, where exposure reduction can prevent the development of allergy. Similar prevention approaches need to be considered for other animal work environments and in all settings where animal allergens are present.

  6. Miscarriage and occupational activity

    DEFF Research Database (Denmark)

    Bonde, Jens Peter; Jørgensen, Kristian Tore; Bonzini, Matteo

    2013-01-01

    OBJECTIVE: Previous studies have indicated that shift work, long working hours, and prevalent workplace exposures such as lifting, standing, and physical workload increase the risk of miscarriage, but the evidence is conflicting. We conducted a systematic review of original research reports......% confidence interval (95% CI) 1.27-1.78, N=5), while working in 3-shift schedules, working for 40-52 hours weekly, lifting >100 kg/day, standing >6-8 hours/day and physical workload were associated with small risk increments, with the pooled RR ranging from 1.12 (3-shift schedule, N=7) to 1.36 (working hours......, N=10). RR for working hours and standing became smaller when analyses were restricted to higher quality studies. CONCLUSIONS: These largely reassuring findings do not provide a strong case for mandatory restrictions in relation to shift work, long working hours, occupational lifting, standing...

  7. Occupational ergonomics in space

    Science.gov (United States)

    Stramler, J.

    1992-01-01

    Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

  8. DOE 2012 occupational radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-10-01

    The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2012 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past 5-year period, the occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site.

  9. DOE 2011 occupational radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-12-01

    The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2011 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. The occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site over the past five years.

  10. Occupational Trends and Program Priorities

    Directory of Open Access Journals (Sweden)

    Dan Rosenthal

    2001-07-01

    Full Text Available Institutions of higher education that respond to the economic base in their region will remain competitive and be better positioned to obtain public funds and donor support. In addition to mandated program viability standards based on measures such as graduation rate, individual institutions and state coordinating boards can use ten-year occupational trend data to assess future program viability. We used an occupational demand model to determine whether academic programs can meet projected statewide needs for high demand and high growth occupations. For example, computer engineering, the highest growth rate occupation in Alabama, is projected to have 365 annual average job openings, with 93.6% total growth over ten years. But only 46 computer engineering majors graduate annually from all Alabama institutions of higher education. We recommend using an occupational demand model as a planning tool, decision-making tool, and catalyst for collaborative initiatives.

  11. International Occupational Therapy Research Priorities.

    Science.gov (United States)

    Mackenzie, Lynette; Coppola, Susan; Alvarez, Liliana; Cibule, Lolita; Maltsev, Sergey; Loh, Siew Yim; Mlambo, Tecla; Ikiugu, Moses N; Pihlar, Zdenka; Sriphetcharawut, Sarinya; Baptiste, Sue; Ledgerd, Richard

    2017-04-01

    Occupational therapy is a global profession represented by the World Federation of Occupational Therapists (WFOT). International research priorities are needed for strategic guidance on global occupational therapy practice. The objective of this study was to develop international research priorities to reflect global occupational therapy practice. A Delphi study using three rounds of electronic surveys, distributed to WFOT member organizations and WFOT accredited universities, was conducted. Data were analyzed after each round, and priorities were presented for rating and ranking in order of importance. Forty-six (53%) out of 87 WFOT member countries participated in the Delphi process. Eight research priorities were confirmed by the final electronic survey round. Differences were observed in rankings given by member organizations and university respondents. Despite attrition at Round 3, the final research priorities will help to focus research efforts in occupational therapy globally. Follow-up research is needed to determine how the research priorities are being adopted internationally.

  12. Occupational tumors of the thorax

    International Nuclear Information System (INIS)

    Kraus, T.; Mueller-Lux, A.

    2004-01-01

    It is estimated that about 4% of cancer mortality is attributed to occupational risk factors. Due to long latency periods it is often difficult to establish causal relationships. Thoracal cancer accounts for about 88% of all compensated occupational cancers in Germany. Most important exposures and diseases are asbestos-related lung cancer, asbestos-related malignant mesothelioma and radiation induced lung cancer (by Radon and its decay products). Lung cancer caused by nickel compounds, hexavalent chromium, arsenic and its compounds, coke oven gases and polycyclic aromatic hydrocarbons are rare. Silica-dust induced lung cancer can be compensated as occupational disease if a silicosis is present. In Germany every physician is obliged to notify a suspected occupational cancer as well as other occupational diseases. (orig.) [de

  13. Image-based occupancy sensor

    Science.gov (United States)

    Polese, Luigi Gentile; Brackney, Larry

    2015-05-19

    An image-based occupancy sensor includes a motion detection module that receives and processes an image signal to generate a motion detection signal, a people detection module that receives the image signal and processes the image signal to generate a people detection signal, a face detection module that receives the image signal and processes the image signal to generate a face detection signal, and a sensor integration module that receives the motion detection signal from the motion detection module, receives the people detection signal from the people detection module, receives the face detection signal from the face detection module, and generates an occupancy signal using the motion detection signal, the people detection signal, and the face detection signal, with the occupancy signal indicating vacancy or occupancy, with an occupancy indication specifying that one or more people are detected within the monitored volume.

  14. Corporate Cost of Occupational Accidents

    DEFF Research Database (Denmark)

    Rikhardsson, Pall M.; Impgaard, M.

    2004-01-01

    method could be used in all of the companies without revisions. The evaluation of accident cost showed that 2/3 of the costs of occupational accidents are visible in the Danish corporate accounting systems reviewed while 1/3 is hidden from management view. The highest cost of occupational accidents......The systematic accident cost analysis (SACA) project was carried out during 2001 by The Aarhus School of Business and PricewaterhouseCoopers Denmark with financial support from The Danish National Working Environment Authority. Its focused on developing and testing a method for evaluating...... occupational costs of companies for use by occupational health and safety professionals. The method was tested in nine Danish companies within three different industry sectors and the costs of 27 selected occupational accidents in these companies were calculated. One of the main conclusions is that the SACA...

  15. Environmental and occupational allergies.

    Science.gov (United States)

    Peden, David; Reed, Charles E

    2010-02-01

    Airborne allergens are the major cause of allergic rhinitis and asthma. Daily exposure comes from indoor sources, chiefly at home but occasionally at schools or offices. Seasonal exposure to outdoor allergens, pollens, and molds is another important source. Exposure to unusual substances at work causes occupational asthma, accounting for about 5% of asthma in adults. Indoor and outdoor air pollutants trigger airway inflammation and increase the severity of asthma. Diesel exhaust particles increase the production of IgE antibodies. Identification and reduction of exposure to allergens is a very important part of the management of respiratory allergic diseases. The first section of this chapter discusses domestic allergens, arthropods (mites and cockroaches), molds, and mammals (pets and mice). Indoor humidity and water damage are important factors in the production of mite and mold allergens, and discarded human food items are important sources of proliferation of cockroaches and mice. Means of identifying and reducing exposure are presented. The second section discusses outdoor allergens: pollens and molds. The particular plants or molds and the amount of exposure to these allergens is determined by the local climate, and local pollen and mold counts are available to determine the time and amount of exposure. Climate change is already having an important effect on the distribution and amount of outdoor allergens. The third section discusses indoor and outdoor air pollution and methods that individuals can take to reduce indoor pollution in addition to eliminating cigarette smoking. The fourth section discusses the diagnosis and management of occupational asthma. Copyright 2010 American Academy of Allergy, Asthma & Immunology. Published by Mosby, Inc. All rights reserved.

  16. The trend of occupational injuries in Korea from 2001 to 2010.

    Science.gov (United States)

    Rhee, Kyung Yong; Choe, Seong Weon; Kim, Young Sun; Koo, Kwon Ho

    2013-03-01

    This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety.

  17. Poultry Producer. Ohio's Competency Analysis Profile.

    Science.gov (United States)

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a poultry producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability…

  18. Profile of ocular trauma in industries-related hospital.

    Science.gov (United States)

    Shashikala, P; Sadiqulla, Mohammed; Shivakumar, D; Prakash, K H

    2013-05-01

    Ocular trauma is a worldwide cause of visual morbidity, a significant proportion of which occurs in the industrial workplace and includes a spectrum of simple ocular surface foreign bodies, abrasions to devastating perforating injuries causing blindness. Being preventable is of social and medical concern. A prospective case series study, to know the profile of ocular trauma at a hospital caters exclusively to factory employees and their families, to co-relate their demographic and clinical profile and to identify the risk factors. Patients with ocular trauma who presented at ESIC Model hospital, Rajajinagar, Bangalore, from June 2010 to May 2011 were taken a detailed demographic data, nature and cause of injury, time interval between the time of injury and presentation along with any treatment received. Ocular evaluation including visual acuity, anterior and posterior segment findings, intra-ocular pressure and gonio-scopy in closed globe injuries, X-rays for intraocular foreign body, B-scan and CT scan were done. Data analyzed as per the ocular trauma classification group. The rehabilitation undertaken medically or surgically was analyzed. At follow-up, the final best corrected visual acuity was noted. A total of 306 cases of ocular trauma were reported; predominantly in 20-40 year age group (72.2%) and in men (75%). The work place related cases were 50.7%and of these, fall of foreign bodies led the list. Visual prognosis was poorer in road traffic accidents rather than work place injuries owing to higher occurrence of open globe injuries and optic neuropathy. Finally, 11% of injured cases ended up with poor vision. Targeting groups most at risk, providing effective eye protection, and developing workplace safety cultures may together reduce occupational eye injuries.

  19. Spectrum scanning and reserve channel methods for link maintenance in cognitive radio systems

    OpenAIRE

    Subramani, S; Armour, SMD; Kaleshi, D; Fan, Z

    2008-01-01

    Underutilization of the limited spectrum sparked the need for dynamic spectrum access and flexible spectrum policies. Accurate estimation of spectrum occupancy is an essential step for spectrum access in distributed networks. This paper analyzes a bidirectional and dual scanning method that scans multiple spectrum bands to find a suitable free-channel. Moreover, secondary users' access to available spectrum could be interrupted by the arrival of primary spectrum users, forcing the well-behave...

  20. Occupation and multiple myeloma: an occupation and industry analysis.

    Science.gov (United States)

    Gold, Laura S; Milliken, Kevin; Stewart, Patricia; Purdue, Mark; Severson, Richard; Seixas, Noah; Blair, Aaron; Davis, Scott; Hartge, Patricia; De Roos, Anneclaire J

    2010-08-01

    Multiple myeloma (MM) is an incurable plasma cell malignancy with a poorly understood etiology. The purpose of our research was to examine the relationships between lifetime occupations and MM in a relatively large case-control study. MM cases (n = 180) were identified through cancer registries in the Seattle-Puget Sound area and Detroit. Population-based controls (n = 481) were identified using random digit dialing and Medicare and Medicaid Services files. In-person interviews were conducted to ascertain occupational histories. Standard occupational classification (SOC) and standard industrial classification (SIC) codes were assigned to each job held by each participant. Unconditional logistic regression was used to generate odds ratios (ORs) and 95% confidence intervals (CIs) for associations between MM and having ever worked in each occupation/industry and according to duration of employment in an occupation/industry. The risk of MM was associated with several manufacturing occupations and industries, including machine operators and tenders, not elsewhere classified (SOC 76) (OR = 1.8, CI = 1.0-3.3); textile, apparel, and furnishing machine operators and tenders (SOC 765) (OR = 6.0, CI = 1.7-21); and machinery manufacturing, except electrical (SIC 35) (OR = 3.3, CI = 1.7-6.7). Several service occupations and industries, such as food and beverage preparation (SOC 521) (OR = 2.0, CI = 1.1-3.8), were also associated with MM. One occupation that has been associated with MM in several previous studies, painters, paperhangers, and plasterers (SOC 644) was associated with a non-significantly elevated risk (OR = 3.6, CI = 0.7-19). We found associations between the risk of MM and employment in several manufacturing and service-related occupations and industries. Copyright 2010 Wiley-Liss, Inc.

  1. Hyperchromatic laser scanning cytometry

    Science.gov (United States)

    Tárnok, Attila; Mittag, Anja

    2007-02-01

    In the emerging fields of high-content and high-throughput single cell analysis for Systems Biology and Cytomics multi- and polychromatic analysis of biological specimens has become increasingly important. Combining different technologies and staining methods polychromatic analysis (i.e. using 8 or more fluorescent colors at a time) can be pushed forward to measure anything stainable in a cell, an approach termed hyperchromatic cytometry. For cytometric cell analysis microscope based Slide Based Cytometry (SBC) technologies are ideal as, unlike flow cytometry, they are non-consumptive, i.e. the analyzed sample is fixed on the slide. Based on the feature of relocation identical cells can be subsequently reanalyzed. In this manner data on the single cell level after manipulation steps can be collected. In this overview various components for hyperchromatic cytometry are demonstrated for a SBC instrument, the Laser Scanning Cytometer (Compucyte Corp., Cambridge, MA): 1) polychromatic cytometry, 2) iterative restaining (using the same fluorochrome for restaining and subsequent reanalysis), 3) differential photobleaching (differentiating fluorochromes by their different photostability), 4) photoactivation (activating fluorescent nanoparticles or photocaged dyes), and 5) photodestruction (destruction of FRET dyes). With the intelligent combination of several of these techniques hyperchromatic cytometry allows to quantify and analyze virtually all components of relevance on the identical cell. The combination of high-throughput and high-content SBC analysis with high-resolution confocal imaging allows clear verification of phenotypically distinct subpopulations of cells with structural information. The information gained per specimen is only limited by the number of available antibodies and by sterical hindrance.

  2. Perfil audiométrico de indivíduos expostos ao ruído atendidos no núcleo de saúde ocupacional de um hospital do município de Montes Claros, Minas Gerais Audiometric profile of individuals exposed to noise attended at the center for occupational health for a hospital in the municipality of Montes Claros, Minas Gerais

    Directory of Open Access Journals (Sweden)

    Rejane Noronha Leão

    2010-04-01

    Full Text Available OBJETIVO: traçar o perfil audiométrico de pacientes expostos a ruído, atendidos no Núcleo de Saúde Ocupacional da Fundação Hospitalar de Montes Claros (Hospital Aroldo Tourinho em Minas Gerais. MÉTODOS: análise de prontuários audiológicos do Núcleo de Saúde Ocupacional da Fundação Hospitalar de Montes Claros/MG de trabalhadores expostos a ruído ocupacional no período de junho a dezembro de 2006. RESULTADOS: a amostra de prontuários caracterizou-se por predominância do sexo masculino (98,3%, com média de 34,7 anos idade. Dos dados obtidos: 37,9% dos trabalhadores não usavam nenhum tipo de protetor auditivo; 19,8% dos trabalhadores foram expostos a um ou mais agente químico; 17% descreveram alguma queixa auditiva; 6,3% usavam algum medicamento; 7,4% citaram doenças prévias; 6,7% relataram deficientes auditivos na família. Identificou-se que 13,2% dos trabalhadores apresentaram perda auditiva na orelha direita (31,8% destas perdas auditivas foram sugestivas de perda auditiva induzida por níveis elevados de pressão sonora e 15,5% na orelha esquerda (36,77% destas perdas auditivas foram sugestivas de perda auditiva induzida por níveis elevados de pressão sonora. CONCLUSÃO: nesta pesquisa houve uma alta prevalência de alterações audiométricas sugestivas de perda auditiva induzida por níveis elevados de pressão sonora, com predomínio maior de perdas auditivas na orelha esquerda. Também houve diferenças significantes em relação à exposição diária dos trabalhadores ao ruído, ao ruído extra-ocupacional e às funções desempenhadas pelos trabalhadores. Além disso, é preocupante o uso insuficiente e inadequado do equipamento de proteção individual auricular por parte dos trabalhadores expostos ao ruído.PURPOSE: to draw the audiometric profile of patients exposed to noise, attended the Center for Occupational Health Foundation's Hospital of Montes Claros (Aroldo Tourinho Hospital in Minas Gerais. METHODS

  3. Gallium scans in myasthenia gravis

    International Nuclear Information System (INIS)

    Swick, H.M.; Preston, D.F.; McQuillen, M.P.

    1976-01-01

    A study was conducted to determine whether 67 Ga scans could be used for the detection of thymomas and to investigate the activity of the thymus gland in patients with myasthenia gravis. Scans of the anterior mediastinum proved to be a reliable way to detect thymomas. The scans were positive in eight patients including three with myasthenia gravis and histologically proved thymomas, three others with severe myasthenia gravis and thymic tumors, and two with histologically proved thymomas not associated with myasthenia. Activity on 67 Ga scans was not directly related to the increased activity of the thymus gland that is presumed to be associated with myasthenia gravis

  4. Gallium scans in myasthenia gravis

    Energy Technology Data Exchange (ETDEWEB)

    Swick, H.M. (Univ. of Kentucky, Lexington); Preston, D.F.; McQuillen, M.P.

    1976-01-01

    A study was conducted to determine whether /sup 67/Ga scans could be used for the detection of thymomas and to investigate the activity of the thymus gland in patients with myasthenia gravis. Scans of the anterior mediastinum proved to be a reliable way to detect thymomas. The scans were positive in eight patients including three with myasthenia gravis and histologically proved thymomas, three others with severe myasthenia gravis and thymic tumors, and two with histologically proved thymomas not associated with myasthenia. Activity on /sup 67/Ga scans was not directly related to the increased activity of the thymus gland that is presumed to be associated with myasthenia gravis. (HLW)

  5. Fluence scan: an unexplored property of a laser beam

    International Nuclear Information System (INIS)

    Chalupsky, Jaromir; Hajkova, Vera; Burian, Tomas; Juha, Libor; Polcar, Tomas; Gaudin, Jerome; Nagasono, Mitsuru; Yabashi, Makina; Sobierajski, Ryszard; Krzywinski, Jacek

    2013-01-01

    We present an extended theoretical background of so-called fluence scan (f-scan or F-scan) method, which is frequently being used for offline characterization of focused short-wavelength (EUV, soft X-ray, and hard X-ray) laser beams [J. Chalupsky et al., Opt. Express 18, 27836 (2010)]. The method exploits ablative imprints in various solids to visualize iso-fluence beam contours at different fluence and/or clip levels. An f-scan curve (clip level as a function of the corresponding iso-fluence contour area) can be generated for a general non-Gaussian beam. As shown in this paper, fluence scan encompasses important information about energy distribution within the beam profile, which may play an essential role in laser-matter interaction research employing intense non-ideal beams. Here we for the first time discuss fundamental properties of the f-scan function and its inverse counterpart (if-scan). Furthermore, we extensively elucidate how it is related to the effective beam area, energy distribution, and to the so called Liu's dependence [J.M. Liu, Opt. Lett. 7, 196 (1982)]. A new method of the effective area evaluation based on weighted inverse f-scan fit is introduced and applied to real data obtained at the SCSS (SPring-8 Compact SASE Source) facility. (authors)

  6. Automated image quality assessment for chest CT scans.

    Science.gov (United States)

    Reeves, Anthony P; Xie, Yiting; Liu, Shuang

    2018-02-01

    Medical image quality needs to be maintained at standards sufficient for effective clinical reading. Automated computer analytic methods may be applied to medical images for quality assessment. For chest CT scans in a lung cancer screening context, an automated quality assessment method is presented that characterizes image noise and image intensity calibration. This is achieved by image measurements in three automatically segmented homogeneous regions of the scan: external air, trachea lumen air, and descending aorta blood. Profiles of CT scanner behavior are also computed. The method has been evaluated on both phantom and real low-dose chest CT scans and results show that repeatable noise and calibration measures may be realized by automated computer algorithms. Noise and calibration profiles show relevant differences between different scanners and protocols. Automated image quality assessment may be useful for quality control for lung cancer screening and may enable performance improvements to automated computer analysis methods. © 2017 American Association of Physicists in Medicine.

  7. Large Scale Scanning Probe Microscope "Making Shear Force Scanning visible."

    NARCIS (Netherlands)

    Bosma, E.; Offerhaus, Herman L.; van der Veen, Jan T.; van der Veen, J.T.; Segerink, Franciscus B.; Wessel, I.M.

    2010-01-01

    We describe a demonstration of a scanning probe microscope with shear-force tuning fork feedback. The tuning fork is several centimeters long, and the rigid fiber is replaced by a toothpick. By scaling this demonstration to visible dimensions the accessibility of shear-force scanning and tuning fork

  8. Occupational lung diseases in Australia.

    Science.gov (United States)

    Hoy, Ryan F; Brims, Fraser

    2017-11-20

    Occupational exposures are an important determinant of respiratory health. International estimates note that about 15% of adult-onset asthma, 15% of chronic obstructive pulmonary disease and 10-30% of lung cancer may be attributable to hazardous occupational exposures. One-quarter of working asthmatics either have had their asthma caused by work or adversely affected by workplace conditions. Recently, cases of historical occupational lung diseases have been noted to occur with new exposures, such as cases of silicosis in workers fabricating kitchen benchtops from artificial stone products. Identification of an occupational cause of a lung disease can be difficult and requires maintaining a high index of suspicion. When an occupational lung disease is identified, this may facilitate a cure and help to protect coworkers. Currently, very little information is collected regarding actual cases of occupational lung diseases in Australia. Most assumptions about many occupational lung diseases are based on extrapolation from overseas data. This lack of information is a major impediment to development of targeted interventions and timely identification of new hazardous exposures. All employers, governments and health care providers in Australia have a responsibility to ensure that the highest possible standards are in place to protect workers' respiratory health.

  9. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1995-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in STM I, these studies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described in chapters on scanning force microscopy, magnetic force microscopy, and scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Together, the two volumes give a comprehensive account of experimental aspects of STM. They provide essential reading and reference material for all students and researchers involved in this field. In this second edition the text has been updated and new methods are discussed.

  10. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1992-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in Vol. I, these sudies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described inchapters on scanning force microscopy, magnetic force microscopy, scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Togehter, the two volumes give a comprehensive account of experimental aspcets of STM. They provide essentialreading and reference material for all students and researchers involvedin this field.

  11. Occupation and cancer in Britain.

    Science.gov (United States)

    Rushton, L; Bagga, S; Bevan, R; Brown, T P; Cherrie, J W; Holmes, P; Fortunato, L; Slack, R; Van Tongeren, M; Young, C; Hutchings, S J

    2010-04-27

    Prioritising control measures for occupationally related cancers should be evidence based. We estimated the current burden of cancer in Britain attributable to past occupational exposures for International Agency for Research on Cancer (IARC) group 1 (established) and 2A (probable) carcinogens. We calculated attributable fractions and numbers for cancer mortality and incidence using risk estimates from the literature and national data sources to estimate proportions exposed. 5.3% (8019) cancer deaths were attributable to occupation in 2005 (men, 8.2% (6362); women, 2.3% (1657)). Attributable incidence estimates are 13 679 (4.0%) cancer registrations (men, 10 063 (5.7%); women, 3616 (2.2%)). Occupational attributable fractions are over 2% for mesothelioma, sinonasal, lung, nasopharynx, breast, non-melanoma skin cancer, bladder, oesophagus, soft tissue sarcoma, larynx and stomach cancers. Asbestos, shift work, mineral oils, solar radiation, silica, diesel engine exhaust, coal tars and pitches, occupation as a painter or welder, dioxins, environmental tobacco smoke, radon, tetrachloroethylene, arsenic and strong inorganic mists each contribute 100 or more registrations. Industries and occupations with high cancer registrations include construction, metal working, personal and household services, mining, land transport, printing/publishing, retail/hotels/restaurants, public administration/defence, farming and several manufacturing sectors. 56% of cancer registrations in men are attributable to work in the construction industry (mainly mesotheliomas, lung, stomach, bladder and non-melanoma skin cancers) and 54% of cancer registrations in women are attributable to shift work (breast cancer). This project is the first to quantify in detail the burden of cancer and mortality due to occupation specifically for Britain. It highlights the impact of occupational exposures, together with the occupational circumstances and industrial areas where exposures to carcinogenic agents

  12. Radiation hormesis at occupational exposure

    International Nuclear Information System (INIS)

    Georgieva, R.; Rupova, I.; Zaharieva, E.; Acheva, A.

    2007-01-01

    Complete text of publication follows. Objective: The idea in favour of the auspicious effect of low dose ionizing radiation in biological systems exists for years and serves as basis of the radiation hormesis hypothesis. The results in support of this phenomenon are not accepted as reliable by ICRP. The available epidemiological data could only suppose the presence of hormetic effect because of statistics limitations and relatively high spontaneous rate of the examined effects. The present work was aimed at finding appropriate biomarkers applicable in molecular epidemiological surveys of occupationally exposed individuals and/or population to prove radiation hormesis. Methods: Blood samples were taken from more than 400 NPP workers, divided in two groups: from the 'strict regimen' area (exposed) and from the administration staff (control). Two levels of evaluation were used: 1) molecular - spontaneous and induced DNA repair by UDS, protein synthesis evaluated radio-metrically, DNA damage by SCGE - all of them in white blood cells, concentration of malonedialdehyde in blood serum; and 2) cellular - the Ly-subsets by flow cytometry, using a FacScan analyzer and immunofluorescent stained mouse monoclonal antibodies. Results: A significant decrease of potentially lethal damage was found in persons with 'mean annual dose' lower or equal to 5 mSv/a, compared to the control group. The highest repair capacity after a challenging dose of 2,0 Gy gamma rays as well as a significant decrease in the level of oxidative stress was evaluated for persons from the same group. At doses below 200 mSv statistically different decrease of the index of CD3+4+, CD4+25+, CD4+62L+ lymphocyte populations and CD4/CD8 cell ratio was established, and increased levels of NK cells, CD57+8+ , CD8+28+ and CD8+38 were recorded. Conclusion: The present investigation showed that annual doses lower than twice the natural radiation background exert positive effects on DNA damage and repair, increase

  13. Wanted: entrepreneurs in occupational therapy.

    Science.gov (United States)

    Anderson, Kristin M; Nelson, David L

    2011-01-01

    The American Occupational Therapy Association (AOTA) has challenged occupational therapy practitioners to advance the profession so that we may become more "powerful" and "widely recognized" by the year 2017 (AOTA, 2007a). To fully achieve this vision, this article argues that the profession should encourage occupational therapy entrepreneurship. As Herz, Bondoc, Richmond, Richman, and Kroll (2005, p.2) stated, "Entrepreneurship may provide us with the means to achieve the outcomes we need to succeed in the current health care environment." This article also argues the urgency of seizing the many opportunities that entrepreneurship offers and recommends specific actions to be taken by AOTA and by therapists.

  14. Occupational contact dermatitis in hairdressers

    DEFF Research Database (Denmark)

    Schwensen, Jakob F; Johansen, Jeanne Duus; Veien, Niels K

    2013-01-01

    BACKGROUND: Occupational contact dermatitis among hairdressers is frequent, owing to daily exposure to irritants and allergens. OBJECTIVES: To identify sensitization to the most common allergens associated with the occupation of hairdressing. METHODS: Patch test results of 399 hairdressers and 1995...... matched controls with contact dermatitis, registered by the Danish Contact Dermatitis Group between January 2002 and December 2011, were analysed. All patients were patch tested with the European baseline series, and hairdressers were additionally tested with the hairdressing series. RESULTS: Occupational...... contact dermatitis (p dermatitis was less commonly observed among hairdressers (21.3%) than among controls (29.4%) (p 

  15. The link between personality type and the risk of occupational electrical injury

    Energy Technology Data Exchange (ETDEWEB)

    Howe, Gavan

    2011-09-15

    Personality type has a very important impact on many occupations and on day-to-day life. A 2006 survey found that over 80% of all electricians have an extrovert profile which is related to risk-bearing (agreeableness) and risk-taking. Non-critical, occupational electrical and powerline accidents doubled from 1998 to 2006. Other trade workers (not electricians) suffer 80% of all occupational deaths due to electrical contact. And young, single, male, extroverted, electrical apprentices are the most vulnerable workers when around electricity. Electricians are vulnerable to electrical accidents. They lack in-depth, day-to-day, supervised training around electricity. By researching the link between personality type and the risk of occupational electrical injury, we can determine which types of workers' profile we need on the job site. Training, education, communications and rehabilitation plans can be modified to safeguard workers' safety.

  16. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  17. Simulation of Profiles Data For Computed Tomography Using Object Images

    International Nuclear Information System (INIS)

    Srisatit, Somyot

    2007-08-01

    Full text: It is necessary to use a scanning system to obtain the profiles data for computed tomographic images. A good profile data can give a good contrast and resolution. For the scanning system, high efficiency and high price of radiation equipments must be used. So, the simulated profiles data to obtain a good CT images quality as same as the real one for the demonstration can be used

  18. Adding sub-hourly occupancy prediction, occupancy-sensing control and manual environmental control to ESP-r

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, D. [Laval Univ., Quebec City, PQ (Canada). School of Architecture; Hand, J.; Macdonald, I. [Strathclyde Univ., Glasgow (United Kingdom). Energy Systems Research Unit; Reinhart, C. [National Research Council of Canada, Ottawa, ON (Canada). Institute for Research in Construction

    2004-07-01

    There are several whole building energy simulation programs that require input of casual gain loads such as heat discharged from occupants or lighting and equipment loads. Variations in casual gains in offices are attributed to absenteeism, occupant environmental preference and energy management features. This paper discussed energy simulation programs which offer sub-hourly simulation time-steps, diversity profiles of occupancy and associated gains such as lighting and equipment. In particular, it focused on the different events that occur in buildings at sub-hourly frequencies, such as manually adjusting blinds and lights in response to illuminance variations. These short-term changes affect electrical energy demand because they generate evident shifts in instantaneous solar and equipment loads. However, it is a challenge to model these complex sub-hourly changes. This paper reviews various models predicting occupancy, occupancy-sensing control and manual environmental controls. Their addition to whole building energy simulations were then outlined with particular reference to the ESP-r. 34 refs., 1 fig.

  19. Echinococcosis: an Occupational Disease

    Directory of Open Access Journals (Sweden)

    M Farahmand

    2010-03-01

    Full Text Available Hydatidosis is a common infestation caused by Echinococcus spp. Solitary hydatid cyst of the lung is not uncommon but coexistence of two or more pulmonary cysts are less common. These cysts may drain into the bronchial tree or very rarely into the pleural cavity which causes a poor outcome. Certain people such as slaughters, tanners, stockbreeders, shepherds, butchers, veterinarians and all whose job makes them to work closely with animals are at higher risk of the infection and developing echinococcosis. Herein, we present a 14-year-old shepherd who developed severe chest pain and hydropneumothorax following a minor trauma to his chest. He had two pulmonary hydatid cysts, one of which drained to the left pleural cavity and caused the symptoms. Another cyst was complicated during his hospital course. The patient was treated surgically, received albendazole and discharged home uneventfully. A high index of suspicion is of utmost importance for the correct diagnosis and treatment of hydatid disease in hyperendemic areas and in those whose occupation might put them at a higher risk of contraction of hydatid disease.

  20. Occupational cancer and radiation

    International Nuclear Information System (INIS)

    Brahams, D.

    1988-01-01

    There have been two High Court actions and seven inquests in the UK, with reference to the debate on occupational hazards of long term, low dose exposure. In July, 1987, two cases alleging that workers in the nuclear industry had contracted cancer due to their exposure to radiation at work had to be abandoned halfway through the trial after the judge had heard the medical evidence. A 57-year old man claimed that Hodgkin's disease had been caused by radiation while at work at Sellafield. However, medical opinion was that Hodgkin's disease had never been accepted as caused by radiation. In the second case a man who had died of stomach cancer at the age of 54 after working for UKAEA at Dounreay for 7 years, had received 190 mSv. The defendants' experts rated the likelihood of radiation as the cause at 3-6%; the plaintiffs' experts had suggested 30-50%. Seven inquest juries sitting in West Cumbria from 1983 to 1988 have brought in three verdicts of death caused by an industrial disease, three open verdicts, and one of natural causes. The men had all worked for BNFL at Sellafield for many years. (author)

  1. An interchangeable scanning Hall probe/scanning SQUID microscope

    International Nuclear Information System (INIS)

    Tang, Chiu-Chun; Lin, Hui-Ting; Wu, Sing-Lin; Chen, Tse-Jun; Wang, M. J.; Ling, D. C.; Chi, C. C.; Chen, Jeng-Chung

    2014-01-01

    We have constructed a scanning probe microscope for magnetic imaging, which can function as a scanning Hall probe microscope (SHPM) and as a scanning SQUID microscope (SSM). The scanning scheme, applicable to SHPM and SSM, consists of a mechanical positioning (sub) micron-XY stage and a flexible direct contact to the sample without a feedback control system for the Z-axis. With the interchangeable capability of operating two distinct scanning modes, our microscope can incorporate the advantageous functionalities of the SHPM and SSM with large scan range up to millimeter, high spatial resolution (⩽4 μm), and high field sensitivity in a wide range of temperature (4.2 K-300 K) and magnetic field (10 −7 T-1 T). To demonstrate the capabilities of the system, we present magnetic images scanned with SHPM and SSM, including a RbFeB magnet and a nickel grid pattern at room temperature, surface magnetic domain structures of a La 2/3 Ca 1/3 MnO 3 thin film at 77 K, and superconducting vortices in a striped niobium film at 4.2 K

  2. An interchangeable scanning Hall probe/scanning SQUID microscope

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Chiu-Chun; Lin, Hui-Ting; Wu, Sing-Lin [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Chen, Tse-Jun; Wang, M. J. [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China); Ling, D. C. [Department of Physics, Tamkang University, Tamsui Dist., New Taipei City 25137, Taiwan (China); Chi, C. C.; Chen, Jeng-Chung [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Frontier Research Center on Fundamental and Applied Sciences of Matters, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2014-08-15

    We have constructed a scanning probe microscope for magnetic imaging, which can function as a scanning Hall probe microscope (SHPM) and as a scanning SQUID microscope (SSM). The scanning scheme, applicable to SHPM and SSM, consists of a mechanical positioning (sub) micron-XY stage and a flexible direct contact to the sample without a feedback control system for the Z-axis. With the interchangeable capability of operating two distinct scanning modes, our microscope can incorporate the advantageous functionalities of the SHPM and SSM with large scan range up to millimeter, high spatial resolution (⩽4 μm), and high field sensitivity in a wide range of temperature (4.2 K-300 K) and magnetic field (10{sup −7} T-1 T). To demonstrate the capabilities of the system, we present magnetic images scanned with SHPM and SSM, including a RbFeB magnet and a nickel grid pattern at room temperature, surface magnetic domain structures of a La{sub 2/3}Ca{sub 1/3}MnO{sub 3} thin film at 77 K, and superconducting vortices in a striped niobium film at 4.2 K.

  3. College for some to college for all: social background, occupational expectations, and educational expectations over time.

    Science.gov (United States)

    Goyette, Kimberly A

    2008-06-01

    The educational expectations of 10th-graders have dramatically increased from 1980 to 2002. Their rise is attributable in part to the changing educational composition of students' parents and related to the educational profiles of their expected occupations. Students whose parents have gone to college are more likely to attend college themselves, and students expect occupations that are more prestigious in 2002 than in 1980. The educational requirements of particular occupation categories have risen only slightly. These analyses also reveal that educational expectations in recent cohorts are more loosely linked to social background and occupational plans than they were in 1980. The declining importance of parents' background and the decoupling of educational and occupational plans, in addition to a strong and significant effect of cohort on educational expectations, suggest that the expectation of four-year college attainment is indeed becoming the norm.

  4. DOE 2010 occupational radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-11-01

    The U.S. Department of Energy (DOE) Office of Analysis within the Office of Health, Safety and Security (HSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE.* The DOE 2010 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with DOE Part 835 dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. The occupational radiation exposure information is analyzed in terms of aggregate data, dose to individuals, and dose by site over the past 5 years.

  5. Sleep in High Stress Occupations

    Science.gov (United States)

    Flynn-Evans, Erin

    2014-01-01

    High stress occupations are associated with sleep restriction, circadian misalignment and demanding workload. This presentation will provide an overview of sleep duration, circadian misalignment and fatigue countermeasures and performance outcomes during spaceflight and commercial aviation.

  6. Practical occupational medicine in "practice"

    DEFF Research Database (Denmark)

    Ingemann Larsen, Anders; Schmidt, Jan; Jepsen, Jørgen Riis

    2016-01-01

    with few occupational health resources. This Editorial argues that family physicians are indeed in a position where they can make a major positive difference for their working patients and for the enterprises where they work. Without specialist knowledge in occupational medicine, the family physician......’s empiric knowledge in combination with a narrative approach to the patient permits the contribution from family medicine not only with regard to diagnosis and treatment, but also relating to actions targeted to optimize the patient’s future accommodation at work as well as to protect other similarly......In Denmark, the practice of occupational medicine tends to be carried out by specialists in occupational medicine and less so by family physicians. The provision of health service to workers is therefore limited. This constraint may also apply in other developed countries and even more in countries...

  7. Occupational Health and the Arts.

    Science.gov (United States)

    Hinkamp, David L; McCann, Michael; Babin, Angela

    2017-09-01

    Work in the visual arts, performing arts, and writing can involve exposures to occupational hazards, including hazardous materials, equipment, and conditions, but few art workplaces have strong occupational health resources. Literature searches were conducted for articles that illustrate these concerns. Medical databases were searched for art-related health articles. Other sources were also reviewed, including, unindexed art-health publications, and popular press articles. Information was located that described some exposed populations, art-related hazards, and resulting disorders. Anecdotal reports were used when more complete data were not available. Health hazards in the arts are significant. Occupational health professionals are familiar with most of these concerns and understand their treatment and prevention. The occupational health approach can reduce the health hazards encountered by at-risk art workers. Additional research would benefit these efforts. Resources for further information are available.

  8. OCCUPATIONAL HEALTH HAZARDS AMONG QUARRY ...

    African Journals Online (AJOL)

    Key Words: Occupational health hazards, Industrial pollution, Quarry industry, ... fireworks and signaling apparatus and for setting blind rivets and forming ... in the air, physiological risks and psychological trauma (Ajayi & Osibanjo, 1995).

  9. Spiritual Assessments in Occupational Therapy

    Directory of Open Access Journals (Sweden)

    Barbara Hemphill

    2015-07-01

    Full Text Available Spirituality is recognized as an important concept in the study and practice of medicine, including occupational therapy. This aligns with occupational therapy’s core value of treating people holistically—mind, body, and spirit. Currently, the Joint Commission for the Accreditation of Hospital Organizations ( JCAHO requires that a spiritual assessment be given to patients on admission. To conduct effective spiritual assessments, occupational therapists must distinguish between religion and spirituality. They also must be aware of their own spiritual beliefs and practices and how those might influence their clinical interactions. This article presents spiritual assessment tools that occupational therapists can use in clinical practice; they range from history taking, to questionnaires, to observation scales. Guidelines are presented for selecting among several spiritual assessments. A case study is presented in which a patient’s faith tradition is being challenged, which could affect the outcome of therapy. Finally, treatment and intervention planning and ethical considerations are discussed.

  10. Building Bridges Through Meaningful Occupation

    Directory of Open Access Journals (Sweden)

    Jennifer Fortuna

    2017-07-01

    Full Text Available Mary Block, MS, OTR/L, an occupational therapist and artist based in Illinois, provided the cover art for the Summer 2017 issue of The Open Journal of Occupational Therapy (OJOT. Generations is a sculpture made from concrete that measures 240 x100 in. (6.096 x 2.54 m. The piece was commissioned by Mary’s home town, the Village of Deerfield, IL. Mary always knew she wanted to be an artist. When competing paradigms altered Mary’s career path, the field of occupational therapy helped her to shape a new worldview. In uncertain times, meaningful occupation empowered Mary to start over again where she originally began

  11. Occupational accidents aboard merchant ships

    DEFF Research Database (Denmark)

    Hansen, H.L.; Nielsen, D.; Frydenberg, Morten

    2002-01-01

    Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... aboard. Relative risks for notified accidents and accidents causing permanent disability of 5% or more were calculated in a multivariate analysis including ship type, occupation, age, time on board, change of ship since last employment period, and nationality. Foreigners had a considerably lower recorded...

  12. Sleep as an Occupational Need.

    Science.gov (United States)

    Tester, Nicole J; Foss, Joanne Jackson

    In the same way the human body requires food, hydration, and oxygen, it also requires sleep. Even among healthy people, the amount and quality of sleep substantially influence health and quality of life because sleep helps regulate physiological functioning. Given the impact of sleep on participation, the American Occupational Therapy Association reclassified sleep from an activity of daily living to an occupational domain. Poor sleep is a frequent medical complaint, especially among populations with neurological impairment. Occupational therapy practitioners should consider routinely screening for factors affecting their clients' sleep. By addressing such factors, as well as related routines and habits, practitioners can enhance the effectiveness of rehabilitation, promote health and well-being, and increase engagement and life quality. Practitioners should acknowledge the importance of sleep in practice, and the study of sleep should be prioritized by researchers in the field to meet client needs and establish evidence for interventions. Copyright © 2018 by the American Occupational Therapy Association, Inc.

  13. Occupational applications of ultraviolet radiation

    International Nuclear Information System (INIS)

    Eriksen, P.

    1987-01-01

    A large population of workers are exposed to ultraviolet radiation in various occupational environments which often necessitates protection. Since ultraviolet radiation may create other environmental problems an occupational hazard- and protection evaluation can be complicated. Threshold Limit Values adopted by the American Conference of Governmental Industrial Hygienists (ACGIH) on ultraviolet radiation are used in most countries as guidelines for risk assessment and control measures. This review addresses the levels of ultraviolet radiation met in occupational environments, its measurement and evaluation, and discusses different protection methods. Ultraviolet lasers are beginning to find their way into industrial processes but are still limited in number and they will not be covered here. Emphasis is on broad band incoherent radiation in high risk environments such as welding, and on the evaluation of protective eyewear, see-through curtains and plastics. Other occupational risks associated with the emission of ultraviolet radiation are discussed

  14. Occupational therapy for multiple sclerosis.

    NARCIS (Netherlands)

    Steultjens, E.M.J.; Dekker, J.; Bouter, L.M.; Cardol, M.; Nes, J.C.M. van de; Ende, C.H.M. van den

    2003-01-01

    Background: Multiple sclerosis (MS) patients are referred to occupational therapy with complaints about fatigue, limb weakness, alteration of upper extremity fine motor coordination, loss of sensation and spasticity that causes limitations in performance of activities of daily living and social

  15. Occupational health nursing in hungary.

    Science.gov (United States)

    Hirdi, Henriett Éva; Hong, OiSaeng

    2014-10-01

    This article is the first about occupational health nursing in Hungary. The authors describe the Hungarian health care and occupational health care systems, including nursing education and professional organizations for occupational health nurses. The Fundamental Law of Hungary guarantees the right of every employee to healthy and safe working conditions, daily and weekly rest times and annual paid leave, and physical and mental health. Hungary promotes the exercise of these rights by managing industrial safety and health care, providing access to healthy food, supporting sports and regular physical exercise, and ensuring environmental protection. According to the law, the responsibility for regulation of the occupational health service lies with the Ministry of Human Resources. Safety regulations are under the aegis of the Ministry of National Economy. Copyright 2014, SLACK Incorporated.

  16. Rapid-scan EPR imaging.

    Science.gov (United States)

    Eaton, Sandra S; Shi, Yilin; Woodcock, Lukas; Buchanan, Laura A; McPeak, Joseph; Quine, Richard W; Rinard, George A; Epel, Boris; Halpern, Howard J; Eaton, Gareth R

    2017-07-01

    In rapid-scan EPR the magnetic field or frequency is repeatedly scanned through the spectrum at rates that are much faster than in conventional continuous wave EPR. The signal is directly-detected with a mixer at the source frequency. Rapid-scan EPR is particularly advantageous when the scan rate through resonance is fast relative to electron spin relaxation rates. In such scans, there may be oscillations on the trailing edge of the spectrum. These oscillations can be removed by mathematical deconvolution to recover the slow-scan absorption spectrum. In cases of inhomogeneous broadening, the oscillations may interfere destructively to the extent that they are not visible. The deconvolution can be used even when it is not required, so spectra can be obtained in which some portions of the spectrum are in the rapid-scan regime and some are not. The technology developed for rapid-scan EPR can be applied generally so long as spectra are obtained in the linear response region. The detection of the full spectrum in each scan, the ability to use higher microwave power without saturation, and the noise filtering inherent in coherent averaging results in substantial improvement in signal-to-noise relative to conventional continuous wave spectroscopy, which is particularly advantageous for low-frequency EPR imaging. This overview describes the principles of rapid-scan EPR and the hardware used to generate the spectra. Examples are provided of its application to imaging of nitroxide radicals, diradicals, and spin-trapped radicals at a Larmor frequency of ca. 250MHz. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Uniform irradiation system using beam scanning method for cyclotron

    International Nuclear Information System (INIS)

    Agematsu, Takashi; Okumura, Susumu; Arakawa, Kazuo

    1994-03-01

    JAERI AVF-cyclotron is equipped with an ion beam scanner for large area irradiation. The two-dimensional fluence distribution of ion beam obtained using cellulose triacetate film dosimeter was not uniform. This is resulted from the distortion of excitation current for electromagnet of the scanner. So, the beam scanning condition, i.e., the relation between the ion species, the beam profile and the scanning width, was extremely limited to make a good uniformity. We have developed a beam scanning simulator to get fluence distributions by calculation and then compared the simulated distributions with the measured ones. It was revealed that the both of them are in good agreement and the beam scanning condition to get good uniformity was led by using this simulator. On the basis of these results, the power supply of scanner was improved. A good uniformity of beam distribution was available. (author)

  18. Performance evaluation of a rectifier column using gamma column scanning

    Directory of Open Access Journals (Sweden)

    Aquino Denis D.

    2017-12-01

    Full Text Available Rectifier columns are considered to be a critical component in petroleum refineries and petrochemical processing installations as they are able to affect the overall performance of these facilities. It is deemed necessary to monitor the operational conditions of such vessels to optimize processes and prevent anomalies which could pose undesired consequences on product quality that might lead to huge financial losses. A rectifier column was subjected to gamma scanning using a 10-mCi Co-60 source and a 2-inch-long detector in tandem. Several scans were performed to gather information on the operating conditions of the column under different sets of operating parameters. The scan profiles revealed unexpected decreases in the radiation intensity at vapour levels between trays 2 and 3, and between trays 4 and 5. Flooding also occurred during several scans which could be attributed to parametric settings.

  19. Occupational health and the radiographer

    International Nuclear Information System (INIS)

    Stronach, T.

    1990-01-01

    This paper identifies some of the occupational health hazards faced by radiographers in the hospital environment. There has been very little work done in this area in the past, and as the subject is so large this paper can do little other than raise some of the issues . The hazards addressed include: radiation, ergonomics, chemical, environmental, biological, occupational injury and accident, stress. 14 refs., 2 figs

  20. Accelerated Innovation Deployment (AID) Demonstration Project : Intelligent Compaction and Infrared Scanning Projects

    Science.gov (United States)

    2018-02-01

    This report documents the Missouri Department of Transportation (MoDOT) demonstration grant award for field demonstration projects using intelligent compaction (IC) and infrared scanning (IR) (also called paver-mounted thermal profiles PMTP in the AA...

  1. Fathers' occupation and pregnancy outcome

    International Nuclear Information System (INIS)

    McDonald, A.D.; McDonald, J.C.; Armstrong, B.; Cherry, N.M.; Nolin, A.D.; Robert, D.

    1989-01-01

    Findings from a survey of 56,067 women in Montreal on maternal occupation and pregnancy outcome have been reported. Paternal occupation recorded in the same survey was analysed for spontaneous abortion in 24 occupational groups retaining the six main sectors of maternal occupation and allowing, by means of logistic regression, for seven potentially confounding variables. In only one of the 24 fathers' occupational groups was there a statistically significant excess of spontaneous abortions-mechanics, repairers, and certain assemblers (O/E = 1.10, 90% CI = 1.02-1.20); subdivision of this group suggested that this excess was mainly attributable to the large group of motor vehicle mechanics (O/E = 1.17). No significant excess of known chromosomally determined defects was found in any of the 24 occupational groups. An association of developmental defects was found with food and beverage processing (18 defects observed compared with 8.02 expected; p < 0.05); however, there was no specificity in type of food, beverage, or congenital defect, and no obvious explanatory mechanism. (author)

  2. The cost of occupational dose

    International Nuclear Information System (INIS)

    Fleishman, A.B.; Clark, M.J.

    1980-01-01

    The optimization of radiological protection will routinely involve the balancing of public and occupational exposure, particularly within the nuclear fuel cycle. For example the reduction of public exposure from an effluent stream could lead to increases in occupational exposure from treatment, storage and disposal operations. A methodology is propased for the estimation of the cost of occupational exposure in the UK (Pound man-Sv -1 ) based on valuations of changes in risk. A variable value for the cost of the occupational man-Sv is obtained depending on per caput dose levels. The values at particular per caput dose levels are different for occupational workers and the general public, because of different demography and assumptions on risk perception and aversion. They are however approximately the same when the per caput doses are expressed as percentages of the dose limits for workers and the general public respectively. An example of the application of the derived cost of the occupational man-Sv to an optimisation problem is given. (author)

  3. Occupational dermatoses: An Asian perspective

    Directory of Open Access Journals (Sweden)

    Riti Bhatia

    2017-01-01

    Full Text Available Occupational dermatoses contribute to a significant portion of work-related diseases, especially in Asia, where a major portion of the workforce is in the unorganized sector. This review article is focussed on the frequency and pattern of occupational skin diseases reported across Asian countries and type of allergens implicated in different occupations. The literature was searched systematically using key words 'occupational dermatoses,' 'occupational skin disease' and name of each Asian country. Ninty five full-text articles were considered relevant and evaluated. Some of the dermatoses seen in industrial workers in Asian countries are similar to those in Western countries, including dermatoses due to chromate in construction and electroplating workers, epoxy resin, and chromate in painters, wood dust in workers in the furniture industry, azo dyes in textile workers and formaldehyde and chromates in those working in the leather and dyeing industries, dermatoses in domestic workers, chefs and health-care workers. Dermatoses in workers engaged in agriculture, beedi (tiny cigars manufacture, agarbatti (incense sticks production, fish processing, carpet weaving, sanitation and those working in coffee plantations and coal mines appear to be unique to Asian countries. Recognition of clinical patterns and geographic variations in occupational skin diseases will provide an impetus to further strengthen future research in these areas, as well as improving their management.

  4. Occupational dermatoses: An Asian perspective.

    Science.gov (United States)

    Bhatia, Riti; Sharma, Vinod Kumar

    2017-01-01

    Occupational dermatoses contribute to a significant portion of work-related diseases, especially in Asia, where a major portion of the workforce is in the unorganized sector. This review article is focussed on the frequency and pattern of occupational skin diseases reported across Asian countries and type of allergens implicated in different occupations. The literature was searched systematically using key words 'occupational dermatoses,' 'occupational skin disease' and name of each Asian country. Ninty five full-text articles were considered relevant and evaluated. Some of the dermatoses seen in industrial workers in Asian countries are similar to those in Western countries, including dermatoses due to chromate in construction and electroplating workers, epoxy resin, and chromate in painters, wood dust in workers in the furniture industry, azo dyes in textile workers and formaldehyde and chromates in those working in the leather and dyeing industries, dermatoses in domestic workers, chefs and health-care workers. Dermatoses in workers engaged in agriculture, beedi (tiny cigars) manufacture, agarbatti (incense sticks) production, fish processing, carpet weaving, sanitation and those working in coffee plantations and coal mines appear to be unique to Asian countries. Recognition of clinical patterns and geographic variations in occupational skin diseases will provide an impetus to further strengthen future research in these areas, as well as improving their management.

  5. Engagement in occupation as an inquiring process

    DEFF Research Database (Denmark)

    Madsen, Jacob Østergaard; Josephsson, Staffan

    2017-01-01

    the situatedness of occupation from the perspective of how situation and occupation work together. We argue that this approach can provide a theoretical understanding of engagement in occupation as a natural inquiry process. Viewing occupation from this perspective, we suggest, reveals its transformative capacity...

  6. Industrial Occupations. Education for Employment Task Lists.

    Science.gov (United States)

    Lake County Area Vocational Center, Grayslake, IL.

    The duties and tasks found in these task lists form the basis of instructional content for secondary, postsecondary, and adult occupational training programs for industrial occupations. The industrial occupations are divided into eight clusters. The clusters and occupations are: construction cluster (bricklayer, carpenter, building maintenance…

  7. Occupational therapy practice in emergency care: Occupational therapists' perspectives.

    Science.gov (United States)

    Spang, Lisa; Holmqvist, Kajsa

    2015-01-01

    Emergency care takes place in a complex work environment that is characterized by critically ill patients, short hospital stays, and a wide variety of different healthcare professionals. Studies of occupational therapists' (OTs) experiences of working within emergency care have shown that they often experience difficulties in explaining the essence of occupational therapy and have to justify their approaches. Much effort has been made in Sweden to help OTs dispel the notion that occupational therapy is difficult to explain, and the aim of this study was to describe how Swedish OTs perceive their work in emergency care. A qualitative descriptive approach was taken, and 14 interviews were conducted with OTs working in emergency care. Qualitative content analysis was used to analyse the data. The overall theme that emerged was "Feeling established through deliberate occupation-based work". The underlying categories showed different strategies used by the OTs to provide occupational therapy in an emergency care context. Deliberate strategies were used to demonstrate the effectiveness of occupational therapy and its approaches to patients and other health care professionals, and this resulted in the OTs feeling both established and needed. Unlike the OTs in previous studies, the Swedish OTs experienced no difficulties in explaining occupational therapy and could make convincing arguments for their interventions. Parallel to their clinical work, the OTs worked with on-going development to find ways to improve their approaches. In summary, these Swedish OTs seem to have been provided with a professional language and the knowledge required to establish themselves in an emergency care setting.

  8. A bistatic sodar for precision wind profiling in complex terrain

    DEFF Research Database (Denmark)

    Bradley, Stuart; Hünerbein, Sabine Von; Mikkelsen, Torben

    2012-01-01

    A new ground-based wind profiling technology-a scanned bistatic sodar-is described. The motivation for this design is to obtain a "mastlike"wind vector profile in a single atmospheric column extending from the ground to heights of more than 200 m. The need for this columnar profiling arises from ...

  9. Psychometric Properties of Dunn\\'s Sensory Profile School Companion

    Directory of Open Access Journals (Sweden)

    Guita Movallali

    2017-10-01

    Conclusion The results showed that Dunn's sensory profile has good reliability and validity. Dunn's sensory profile is a useful tool for assessing sensory processing patterns in school and kindergarten settings, and can be used by occupational therapists in clinical environments and by psychologists in educational environments. Information obtained from this profile can have diagnostic value and could also be used for the design of curriculum and classroom space.

  10. Are environmental scanning units effective?

    Science.gov (United States)

    Stubbart, C

    1982-06-01

    Many authorities have urged companies to set up environmental scanning to assist corporate planning. Some advocates have recommended a unit at corporate level. This would give breadth of view and penetration into the future. It would arm decision makers with accurate forecasts. The information would be broad in scope and future directed. It could provide also assumptions for long-range planning. The Fahey and King study produced a model of corporate scanning types. The data showed that environmental information was built into the plan. Though the political environment was important, scanning was inadequate. The best location for scanning was not at corporate level and most firms used irregular methods. The Thomas study concluded that effective environmental scanning was permanent and multi level and that 'best practice' was continuous scanning. In 1978 the sample organizations were revisited. Five of the twelve have not changed their practice. The factors which encouraged a continuous model were the attitudes of academics and business media, demonstrated success of the units, the right kind of personnel. Contrary influences were changes in top management, decentralization moves, resource cuts, defining the environment and its significance, the availability of scanning competent personnel, surprise itself, and the availability of alternatives e.g. external forecasts.

  11. Occupational deprivation in an asylum centre:

    DEFF Research Database (Denmark)

    Morville, Anne-Le; Erlandsson, Lena-Karin

    2013-01-01

    This article presents a study of three asylum-seeking men from Iran and Afghanistan. It aimed to explore how and if they experienced occupations as occupations in a Danish asylum centre and how their life experience shaped their choice and value of current occupations. In-depth narrative interviews...... explored the participants’ occupational history and its influence on their occupations in the asylum centre. A thematic analysis showed that the participants had been subjected to occupational disruption and deprivation by politically oppressive systems even before their flight. Their occupations...... in Denmark were to a certain extent influenced by their earlier occupations and the current occupational deprivation they all experienced was due to limited possibilities in the centre. Although they tried their best to fill their days and create structure, there was a loss of valued occupations...

  12. Re-scan confocal microscopy: scanning twice for better resolution.

    Science.gov (United States)

    De Luca, Giulia M R; Breedijk, Ronald M P; Brandt, Rick A J; Zeelenberg, Christiaan H C; de Jong, Babette E; Timmermans, Wendy; Azar, Leila Nahidi; Hoebe, Ron A; Stallinga, Sjoerd; Manders, Erik M M

    2013-01-01

    We present a new super-resolution technique, Re-scan Confocal Microscopy (RCM), based on standard confocal microscopy extended with an optical (re-scanning) unit that projects the image directly on a CCD-camera. This new microscope has improved lateral resolution and strongly improved sensitivity while maintaining the sectioning capability of a standard confocal microscope. This simple technology is typically useful for biological applications where the combination high-resolution and high-sensitivity is required.

  13. Scanning by use of TV

    International Nuclear Information System (INIS)

    Drevermann, H.

    1981-01-01

    The use of TV read out for scanning and measuring holographic pictures seems to give less problems than the use of optical projection as is usual for conventional bubble chamber photos. Whereas the measuring of conventional bubble chamber pictures seems to give no problems, it is not clear whether scanning by use of TV is possible. Therefore scanning pictures from experiment NA16 (taken in LEBC) with TV only was tried using the TV system of ERASME, where the CRT system is used as a camera. It should be mentioned that this system, being a flying spot device, cannot be adapted for holography. (author)

  14. Tomography system having axial scanning

    International Nuclear Information System (INIS)

    1976-01-01

    An improved method and apparatus has been invented for the transaxial tomographic scanning of a patient to determine mass distribution internal to the patient. A scanning system is provided having a rotatably mounted X-ray radiation source/detector assembly which orbits and scans the patient in plane of orbit. The source provides a plurality of beams of radiation in the orbital plane. Beams pass through the patient to an array of detectors which are spaced in the plane of orbit and respectively aligned with one of the beams. Radiation intensity data is collected at predetermined orientations of each beam-detector pair as the assembly orbits about the patient

  15. Profiling property criminals in Turkey.

    Science.gov (United States)

    Içli, Tülin Günsen; Seydioğullari, Ibrahim; Tatlidil, Hüseyin; Coban, Sevgi; Sever, Hanifi; Süeroğlu, Unal

    2010-08-01

    The main aim of this research is to develop a profile of a thief. Through a comprehensive survey of property crime suspects arrested in the city of Ankara between 2004 and 2005, the authors have attempted to determine the socioeconomic qualities of those involved in these forms of property crimes. Results of the study show that property crimes are a consequence of low education, lack of occupational skills, and alcohol and drug addiction on the part of the offenders. Because of these factors, theft becomes a way of life for offenders after their first act of property crime.

  16. Does the Role Checklist Measure Occupational Participation?

    Directory of Open Access Journals (Sweden)

    Tore Bonsaksen

    2015-07-01

    Full Text Available Background: Among the Model of Human Occupation (MOHO assessments, the Role Checklist is one of the most established. In spite of its widespread use, no studies have examined role examples and their association with the three embedded levels of doing, as established in the MOHO theory. Method: A cross-sectional survey of 293 respondents from the US, the UK, Japan, Switzerland, Sweden, and Norway produced 7,182 role examples. The respondents completed Part I of the Role Checklist and provided examples of each internalized role they performed. Responses were classified as occupational skill, occupational performance, or occupational participation. Results: Thirty-three percent of the examples were classified as examples of occupational participation, whereas 65% were classified as examples of occupational performance. Four roles linked mostly with occupational participation, another four roles linked mostly with occupational performance, and the two remaining roles were mixed between occupational participation and occupational performance. Discussion: The Role Checklist assesses a person’s involvement in internalized roles at the level of both occupational participation and occupational performance. There are differences among countries with regard to how roles are perceived and exemplified, and different roles relate differently to the occupational performance and occupational participation levels of doing. There are related implications for occupational therapists.

  17. The selection of occupancy factors

    International Nuclear Information System (INIS)

    Lakey, J.R.A.

    1977-01-01

    An estimate of the proportion of time that an area is occupied by radiation workers is often used in radiological protection to permit relaxation of exposure rate limits above those for continuous occupation. This proportion is known as an occupancy factor and is used most frequently in X-ray facilities. The strategy for controlling the external exposure of radiation workers must be decided before occupancy factors are selected for the design of the radiation protection facilities. When shielding has to be designed the occupancy factor effects the design objectives and permits increased exposure rates at the shield surface. It is useful to note that the selection of occupancy factors with due regard to the expected spatial variation of the exposure rate can help to reduce the range of the worker's radiation exposure because field gradients are usually steeper close to the shield. When other hazards, such as internal exposure, and other constraints, such as cost of the space consumed, are added, the selection of the optimum set of occupancy factors is more difficult. Two zone occupancy factors are discussed in this paper and proposals are made for a strategy to be used when there is more than one hazard and the designer has to meet constraints imposed by limitations of the facilities available. An important feature of the strategy is the avoidance of high radiation exposure to small groups of workers. The errors involved in assessment of the actual dose received by the radiation worker must be taken into account and in particular the selection of the higher exposure rate limits must be made with attention to the accident potential

  18. Occupational diseases in Poland, 2012

    Directory of Open Access Journals (Sweden)

    Urszula Wilczyńska

    2013-06-01

    Full Text Available Background: The aim of the paper was to present basic statistical data on occupational diseases diagnosed in 2012. Material and Methods: The work was based on the data from "Occupational Disease Reporting Forms" received by the Central Register of Occupational Diseases in 2012. The data comprised information on nosologic units, gender and age of patients, duration of occupational exposure, sections of the national economy and voivodeships. The incidence was specified in terms of the number of cases in relation to paid employees or to employed people. Results: The number of occupational diseases accounted for 2402 cases. The incidence rate was 23 cases per 100 000 paid employees. In spite of the general decline in the number of cases, the incidence of infectious and parasitic diseases increased by 8.6%. The highest incidence was noted for infectious and parasitic diseases (6.8/100 000, pneumoconioses (5.5/100 000, hearing loss (2.1/100 000, diseases of: the peripheral nervous system (2/100 000, voice disorders (1.9/100 000 and the musculo-skeletal system pathologies (1.1/100 000. The pathologies specified above accounted in total for 84% of all occupational diseases. The industrial sectors of the national economy characterized by the highest incidence included mining and quarrying (288.3/100 000 and manufacturing (27.8/100 000. The highest incidence was recorded in the Silesian (46.2/100 000 and the lowest in the Opolskie (4.2/100 000 voivodeships. Conclusions: The downward trend in the incidence of occupational diseases continues. Different incidence of voice disorders among teachers in individual provinces suggests that uniform preventive, diagnostic and certification standards are missing. Med Pr 2013;64(3:317–326

  19. Rapid line scan MR angiography

    International Nuclear Information System (INIS)

    Frahm, J.; Merboldt, K.D.; Hanicke, W.; Bruhn, H.

    1987-01-01

    Direct MR angiography may be performed using line scan imaging techniques combined with presaturation of stationary spins. Thus, a single line scan echo yields a projection of vessels due to the signal from reflowing unsaturated spins. Reconstruction of an angiographic image is performed line by line at slightly incremented positions. In particular, line scan angiography is direct and fast without a sensitivity to artifacts even for high flow rates. Image resolution and field of view may be chosen without restrictions, and zoom images using enhanced gradients may be recorded without aliasing artifacts. The method is robust with respect to eddy currents and pulsatile flow. Line scan MR angiograms of phantoms, animals, and human volunteers have been recorded using 90 0 radio frequency pulses and gradient-recalled echoes

  20. Security scanning at 35 GHz

    Science.gov (United States)

    Anderton, Rupert N.; Appleby, Roger; Coward, Peter R.; Kent, P. J.; Price, Sean; Sinclair, Gordon N.; Wasley, Matthew R. M.

    2001-08-01

    It has been known for some time that millimeter waves can pas through clothing. In short range applications such as in the scanning of people for security purposes, operating at Ka band can be an advantage. The penetration through clothing is increased and the cost of the equipment when compared to operation at W band. In this paper a Ka band mechanically scanned imager designed for security scanning is discussed. This imager is based on the folded conical scan technology previously reported. It is constructed from low cost materials such as polystyrene and printed circuit board. The trade off between image spatial resolution and the number of receivers will be described and solutions, which minimize this number discussed.

  1. Scanning Tunneling Microscopy - image interpretation

    International Nuclear Information System (INIS)

    Maca, F.

    1998-01-01

    The basic ideas of image interpretation in Scanning Tunneling Microscopy are presented using simple quantum-mechanical models and supplied with examples of successful application. The importance is stressed of a correct interpretation of this brilliant experimental surface technique

  2. Transverse section radionuclide scanning system

    International Nuclear Information System (INIS)

    Kuhl, D.E.; Edwards, R.Q.

    1976-01-01

    This invention provides a transverse section radionuclide scanning system for high-sensitivity quantification of brain radioactivity in cross-section picture format in order to permit accurate assessment of regional brain function localized in three dimensions. High sensitivity crucially depends on overcoming the heretofore known raster type scanning, which requires back and forth detector movement involving dead-time or partial enclosure of the scan field. Accordingly, this invention provides a detector array having no back and forth movement by interlaced detectors that enclose the scan field and rotate as an integral unit around one axis of rotation in a slip ring that continuously transmits the detector data by means of laser emitting diodes, with the advantages that increased amounts of data can be continuously collected, processed and displayed with increased sensitivity according to a suitable computer program. 5 claims, 11 figures

  3. Dynamic Flaps Electronic Scan Antenna

    National Research Council Canada - National Science Library

    Gonzalez, Daniel

    2000-01-01

    A dynamic FLAPS(TM) electronic scan antenna was the focus of this research. The novelty S of this SBIR resides in the use of plasma as the main component of this dynamic X-Band phased S array antenna...

  4. Extending Beyond Qualitative Interviewing to Illuminate the Tacit Nature of Everyday Occupation: Occupational Mapping and Participatory Occupation Methods.

    Science.gov (United States)

    Huot, Suzanne; Rudman, Debbie Laliberte

    2015-07-01

    The study of human occupation requires a variety of methods to fully elucidate its complex, multifaceted nature. Although qualitative approaches have commonly been used within occupational therapy and occupational science, we contend that such qualitative research must extend beyond the sole use of interviews. Drawing on qualitative methodological literature, we discuss the limits of interview methods and outline other methods, particularly visual methods, as productive means to enhance qualitative research. We then provide an overview of our critical ethnographic study that used narrative, visual, and observational methods to explore the occupational transitions experienced by immigrants to Canada. We describe our use of occupational mapping and participatory occupation methods and the contributions of these combined methods. We conclude that adopting a variety of methods can enable a deeper understanding of the tacit nature of everyday occupation, and is key to advancing knowledge regarding occupation and to informing occupational therapy practice.

  5. Loci of Causality and Orientation in Occupational and Educational Choices

    Directory of Open Access Journals (Sweden)

    Kalervo Friberg

    2013-06-01

    Full Text Available A student self-determination profile of occupational and educational choices was examined through the concepts of Locus of Causality and Locus of Orientation. Research questions associated with respondents’ certainty of occupation and orientation to vocational education were answered. The tested hypotheses were as follows: (a Independence, initiative, self-guidance, choice of discussion forums, and gender are related to certainty of future occupation choice and choice of vocational education; (b certainty of occupation relates to choosing vocational education; (c negatively biased media lessens interest in vocational education; and (d vocational education choices are related to gender. A survey of ninth-grade students in Finnish comprehensive school was conducted after implementation of a work-orientation program defined in the national comprehensive school curriculum. At the local school system level, 649 subjects of the mean ages of 16.0 years participated in an Internet survey in two school districts in southwestern Finland in 2008. The variables were inserted in Linear Multiple Regression Analysis in IBM SPSS. The means of vocational school choice and certainty of occupation, and vocational school choice and negative media image were compared in SPSS means. An independent-samples t test for vocational school choice and sex was conducted. Statistically significant regression models of loci of orientation and locus of causality were found. The more the respondents were certain of their occupation choice, the more they expressed their secondary education orientation to be vocational school. When students discussed their choices less at home, their orientation to vocational education weakened. A negative media image was not associated with vocational school choice in this data. The measured means for girls’ and boys’ orientations to vocational school did not show statistically significant differences.

  6. Scan analysis in myocardial infarction

    Energy Technology Data Exchange (ETDEWEB)

    Ell, P J [Landesunfallkrankenhaus, Feldkirch (Austria). Inst. fuer Strahlenmedizin

    1976-08-01

    Myocardial scans with sup(99m)Tc-labelled phosphates are reported to be useful in the diagnosis of acute myocardial infarction. A retrospective survey of 205 patients referred for sup(99m)Tc-phophate bone scanning and with no evidence of recent heart disease revealed an occurrence of 10% of false positive images, that is to say, uptake of phosphate in non-infarcted mayocardium. These striking findings stress the need for critical assessment of the usefulness of this diagnostic technique.

  7. X-ray Compton line scan tomography

    Energy Technology Data Exchange (ETDEWEB)

    Kupsch, Andreas; Lange, Axel; Jaenisch, Gerd-Ruediger [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany). Fachgruppe 8.5 - Mikro-ZfP; Hentschel, Manfred P. [Technische Univ. Berlin (Germany); Kardjilov, Nikolay; Markoetter, Henning; Hilger, Andre; Manke, Ingo [Helmholtz-Zentrum Berlin (HZB) (Germany); Toetzke, Christian [Potsdam Univ. (Germany)

    2015-07-01

    The potentials of incoherent X-ray scattering (Compton) computed tomography (CT) are investigated. The imaging of materials of very different atomic number or density at once is generally a perpetual challenge for X-ray tomography or radiography. In a basic laboratory set-up for simultaneous perpendicular Compton scattering and direct beam attenuation tomography are conducted by single channel photon counting line scans. This results in asymmetric distortions of the projection profiles of the scattering CT data set. In a first approach, corrections of Compton scattering data by taking advantage of rotational symmetry yield tomograms without major geometric artefacts. A cylindrical sample composed of PE, PA, PVC, glass and wood demonstrates similar Compton contrast for all the substances, while the conventional absorption tomogram only reveals the two high order materials. Comparison to neutron tomography reveals astonishing similarities except for the glass component (without hydrogen). Therefore, Compton CT offers the potential to replace neutron tomography, which requires much more efforts.

  8. Risk of injury for occupants of motor vehicle collisions from unbelted occupants.

    Science.gov (United States)

    MacLennan, P A; McGwin, G; Metzger, J; Moran, S G; Rue, L W

    2004-12-01

    Unbelted occupants may increase the risk of injury for other occupants in a motor vehicle collision (MVC). This study evaluated the association between occupant restraint use and the risk of injury (including death) to other vehicle occupants. A population based cohort study. United States. MVC occupants (n = 152 191 unweighted, n = 18 426 684 weighted) seated between a belted or unbelted occupant and the line of the principal direction of force in frontal, lateral, and rear MVCs were sampled from the 1991-2002 National Automotive Sampling System General Estimates System. Offset MVCs were not included in the study. Risk ratios and 95% confidence intervals for injury (including death) for occupants seated contiguous to unbelted occupants compared to occupants seated contiguous to belted occupants. Risk ratios were adjusted for at risk occupant's sex, age, seating position, vehicle type, collision type, travel speed, crash severity, and at risk occupants' own seat belt use. Exposure to unbelted occupants was associated with a 40% increased risk of any injury. Belted at risk occupants were at a 90% increased risk of injury but unbelted occupants were not at increased risk. Risks were similar for non-incapacitating and capacitating injuries. There was a 4.8-fold increased risk of death for exposed belted occupants but no increased risk of death for unbelted occupants. Belted occupants are at an increased risk of injury and death in the event of a MVC from unbelted occupants.

  9. Factors influencing job satisfaction among Jordanian occupational therapists: a qualitative study.

    Science.gov (United States)

    Abu Tariah, Hashem Salman; Hamed, Razan T; AlHeresh, Rawan A; Abu-Dahab, Sana M N; AL-Oraibi, Saleh

    2011-12-01

    The main purpose of this study was to explore factors influencing job satisfaction and dissatisfaction among Jordanian occupational therapists. Ours was an explorative qualitative study involving the use of structured open-ended written questions. Participants were asked to answer in narrative their perception about the factors behind their job satisfaction and dissatisfaction. In addition, they were asked to express their suggestions, ideas, or solutions for increasing job satisfaction. Ninety-three occupational therapists responded to the survey. For job satisfaction questions, four themes emerged: a humanistic profession; professional issues; work benefits; and work environment. Participant's comments at the end of the survey revealed one general theme for improving job satisfaction, 'a call for improvement'. This qualitative study revealed that the humanistic nature of occupational therapist was counterbalanced by several dissatisfying factors for occupational therapy practitioners in Jordan. The need for better supported working conditions in terms of financial rewards, recognition, awareness and resources as well as public and professional recognition of occupational therapists are needed to enhance the occupational therapy profile in Jordan. A comprehensive collaboration is highly needed between the individual practitioners, representatives of the profession, government and hospital administrators. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

  10. Laser scanning of a recirculation zone on the Bolund escarpment

    DEFF Research Database (Denmark)

    Mann, Jakob; Angelou, Nikolas; Sjöholm, Mikael

    2012-01-01

    Rapid variations in the height of the recirculation zone are measured with a scanning wind lidar over a small escarpment on the Bolund Peninsula. The lidar is essentially a continuous-wave laser Doppler anemometer with the capability of rapidly changing the focus distance and the beam direction....... The instrument measures the line-ofsight velocity 390 times per second and scans ten wind profiles from the ground up to seven meters per second. The results will be used to test computational fluid dynamics models for flow over terrain, and has relevance for wind energy. The development of multiple lidar...

  11. Laser scanning of a recirculation zone on the Bolund escarpment

    DEFF Research Database (Denmark)

    Mann, Jakob; Angelou, Nikolas; Sjöholm, Mikael

    2014-01-01

    Rapid variations in the height of the recirculation zone are measured with a scanning wind lidar over a small escarpment on the Bolund Peninsula. The lidar is essentially a continuous-wave laser Doppler anemometer with the capability of rapidly changing the focus distance and the beam direction....... The instrument measures the line-of-sight velocity 390 times per second and scans ten wind profiles from the ground up to seven meters per second. We observe a sharp interface between slow and fast moving fluid after the escarpment, and the interface is moving rapidly up and down. This implies that the position...

  12. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  13. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2006-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  14. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    1999-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  15. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  16. Modeling Single Occupant Vehicle Behavior in High-Occupancy Toll (HOT) Facilities

    Science.gov (United States)

    2009-12-14

    High-occupancy toll (HOT) lanes are in operation, under construction, and planned for in several major metropolitan areas. The premise behind HOT lanes is to allow single occupant vehicles (SOVs) to access high occupancy vehicle (HOV) lanes (and theo...

  17. Occupational skin cancer and precancer

    Directory of Open Access Journals (Sweden)

    Fifinela Raissa

    2016-12-01

    Full Text Available Occupational skin cancer and precancerous lesions are skin disorders caused by exposure to chemical carcinogens such as polycyclic hydrocarbons and arsenic, or radiation, such as ultraviolet light and ionizing light in the workplace. Annual increase in skin cancer incidence is believed to be related to various factors such as frequent intense sunlight exposure (i.e. at work, recreational activities, and sun-tanning habit, ozone depletion, an increase in number of geriatric population, and an increase of public awareness in skin cancer. The most common occupational skin cancers are basal cell carcinoma, squamous cell carcinoma, and melanoma. Examples of occupational precancerous lesion of the skin are actinic keratosis and Bowen’s disease. Particular diagnostic criteria to diagnose occupational diseases has been developed. Early detection of occupational skin cancer and precancerous lesion is necessary. An effective prevention program consists of primary prevention such as prevention of hazardous material exposure, secondary prevention such as early detection of disease for early intervention, and tertiary prevention such as minimizing long-term impact of the disease.

  18. Occupational burnout among nursing personel

    Directory of Open Access Journals (Sweden)

    Sylwia Wieder-Huszla

    2016-02-01

    Full Text Available Background. Occupational stress and the related burnout syndrome is undoubtedly one of the most important challenges for public health. Objectives . The objective of the study was identifying occupational burnout among nurses. Material and methods . The questionnaire was responded by 408 professionally active male and female nurses, working in the territory of the West Pomeranian Voivodeship. In the evaluation of occupational burnout the standardized Maslach Burnout Inventory (MBI was applied. Results . Mean values of the level of occupational burnout for the study group amounted to 39.3 ± 30.9 with regard to emotional exhaustion, 30.64 ± 27.89 with respect to the depersonalization subscale and 66.26 ± 27.94 – the lowered level of job satisfaction. Conclusions . 1. The studied nursing personnel showed symptoms of occupational burnout in all dimensions of the syndrome, i.e. high levels of emotional exhaustion and depersonalization as well as low job satisfaction. 2. Individuals with higher education scored lower on the emotional exhaustion scale. 3. Emotional exhaustion is influenced by workplace and position.

  19. DOE 2013 occupational radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    The Office of Analysis within the U.S. Department of Energy (DOE) Office of Environment, Health, Safety and Security (EHSS) publishes the annual DOE Occupational Radiation Exposure Report to provide an overview of the status of radiation protection practices at DOE (including the National Nuclear Security Administration [NNSA]). The DOE 2013 Occupational Radiation Exposure Report provides an evaluation of DOE-wide performance regarding compliance with Title 10, Code of Federal Regulations (C.F.R.), Part 835, Occupational Radiation Protection dose limits and as low as reasonably achievable (ALARA) process requirements. In addition, the report provides data to DOE organizations responsible for developing policies for protection of individuals from the adverse health effects of radiation. The report provides a summary and an analysis of occupational radiation exposure information from the monitoring of individuals involved in DOE activities. Over the past five-year period, the occupational radiation exposure information has been analyzed in terms of aggregate data, dose to individuals, and dose by site.

  20. Scanning tunneling spectroscopy on superconducting proximity nanostructures

    International Nuclear Information System (INIS)

    Chapelier, C; Vinet, M; Lefloch, F

    2001-01-01

    We investigated the local density of states (LDOS) of a normal metal (N) in good electrical contact with a superconductor (S) as a function of the distance x to the NS interface. The sample consists of a pattern of alternate L = 1 mm wide strips of Au and Nb made by UV lithography. We used a low temperature scanning tunneling microscope and a lock-in detection technique to record simultaneously dI/dV(V,x) curves and the topographic profile z(x) at 1.5 K. We scanned along lines perpendicular to the strips. All the spectra show a dip near the Fermi energy, which spectral extension decreases from the superconducting gap Δ at the NS interface to zero at distances x >> ξ N where ξ N ≅ √hD N /2Δ ≅ 53nm is the coherence length in the normal metal. Our measurements are correctly described in the framework of the quasi-classical Green's function formalism. We numerically solved the 1D Usadel equation and extracted a decoherence time in gold of 4 ps. We also investigated the LDOS of small ridges of Au deposited on the top of the Nb lines. In this case, L ≤ ξ N and the spatial variations of the spectra depend on the exact shape of the Au ridge. However, our results are consistent with a predicted minigap related to the Thouless energy. (4. mesoscopic superconductivity)

  1. Occupational safety meets radiation protection

    International Nuclear Information System (INIS)

    Severitt, S.; Oehm, J.; Sobetzko, T.; Kloth, M.

    2012-01-01

    The cooperation circle ''Synergies in operational Security'' is a joint working group of the Association of German Safety Engineers (VDSI) and the German-Swiss Professional Association for Radiation Protection (FS). The tasks of the KKSyS are arising from the written agreement of the two associations. This includes work on technical issues. In this regard, the KKSyS currently is dealing with the description of the interface Occupational Safety / Radiation Protection. ''Ignorance is no defense'' - the KKSyS creates a brochure with the working title ''Occupational Safety meets radiation protection - practical guides for assessing the hazards of ionizing radiation.'' The target groups are entrepreneurs and by them instructed persons to carry out the hazard assessment. Our aim is to create practical guides, simple to understand. The practical guides should assist those, who have to decide, whether an existing hazard potential through ionizing radiation requires special radiation protection measures or whether the usual measures of occupational safety are sufficient. (orig.)

  2. Daily Occupations among asylum seekers

    DEFF Research Database (Denmark)

    Morville, Anne-Le

    2014-01-01

    which might even influence their identity. Such deprivation can eventually lead to dissatisfaction with everyday life and to occupational dysfunction, i.e. a decline in ADL ability. Asylum seekers are a group who are more likely to suffer from health problems than the background population. Especially...... torture survivors suffer from ill health. Pain and psychological symptoms are among the most frequent health issues for both asylum seekers and torture survivors and may cause occupation-related problems. The overarching aim of this thesis was to investigate how staying in an asylum centre influenced...... was to assess whether torture had an influence on the occupational satisfaction and performance, and whether this had changed after ten-months. Forty-three asylum seekers from Afghanistan, Iran and Syria participated at baseline and ten months later 17 were available for inclusion in follow-up studies. Study I...

  3. Occupational exposure assessment in a radioactive facility: a preliminary evaluation

    International Nuclear Information System (INIS)

    Alves, Alice dos Santos; Gerulis, Eduardo; Sanches, Matias P.; Carneiro, Janete C.G.G.

    2013-01-01

    The risk that a worker has found on the job is a function of the hazards present and his exposure level to those hazards. Exposure and risk assessment is therefore the heart of all occupational health and industrial hygiene programs involving a continuous process of information gathering. The use of a systematic method to characterize workplace exposures to chemical, physical and biological risks is a fundamental part of this process. This study aims to carry out a preliminary evaluation in a radioactive facility, identifying potential exposures and consequently the existing occupational hazards (risk/agent) in the workplace which the employee is subject. The study is based on proposal to carry out a basic characterization of the facility, which could be the first step in the investigation of occupational exposure. For this study was essential to know the workplace, potential risks and agents; workforce profile including assignment of tasks, sources of exposure processes, and control measures. The main tool used in this study was based on references, records, standards, procedures, interviews with the workers and with management. Since the basic characterization of the facility has been carried out, consequently the potential exposure to the agents of risks to workers has been identified. The study provided an overview of the perception of risk founded at facility studied. It is expected to contribute with the occupational health program resources for welfare of the worker. (author)

  4. Occupational exposure assessment in a radioactive facility: a preliminary evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Alice dos Santos; Gerulis, Eduardo; Sanches, Matias P.; Carneiro, Janete C.G.G., E-mail: alicesante@hotmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    The risk that a worker has found on the job is a function of the hazards present and his exposure level to those hazards. Exposure and risk assessment is therefore the heart of all occupational health and industrial hygiene programs involving a continuous process of information gathering. The use of a systematic method to characterize workplace exposures to chemical, physical and biological risks is a fundamental part of this process. This study aims to carry out a preliminary evaluation in a radioactive facility, identifying potential exposures and consequently the existing occupational hazards (risk/agent) in the workplace which the employee is subject. The study is based on proposal to carry out a basic characterization of the facility, which could be the first step in the investigation of occupational exposure. For this study was essential to know the workplace, potential risks and agents; workforce profile including assignment of tasks, sources of exposure processes, and control measures. The main tool used in this study was based on references, records, standards, procedures, interviews with the workers and with management. Since the basic characterization of the facility has been carried out, consequently the potential exposure to the agents of risks to workers has been identified. The study provided an overview of the perception of risk founded at facility studied. It is expected to contribute with the occupational health program resources for welfare of the worker. (author)

  5. Hepatobiliary scan in neonatal Jaundice

    International Nuclear Information System (INIS)

    Nahar, Nurun; Hasan, Mizanul; Karim, M.A.

    2002-01-01

    Jaundice is more or less common in newborn babies. Through physiological jaundice is most common cause of neonatal jaundice, possibility of obstructive jaundice especially biliary atresia should be kept in mind. Early diagnosis of biliary atresia followed by surgical treatment can save baby's life. Otherwise death is inevitable due to liver failure. Hepatobiliary scan is the imaging study of choice in neonatal jaundice especially when there is persistent conjugated hyperbilirubinaemia. Total 27 newborn babies of suspected biliary atresia, aged 14 days to 4 months were referred to Institute of Nuclear Medicine for Hepatobiliary scan. All of them had high serum bilirubin ranged from 6.0 mg/dl with an average of 9.35 ng/dl serum bilirubin level. Ultrasonography of hepatobiliary system was performed in 14 cases showing normal sized liver in 4 cases and hepatomegaly in 10 cases. Hepatobiliary scan was done with 99m Tc-Mebrofenin (Br IDA) after preparing the baby with phenobarbitone for 3-5 days. 20 (67%) cases were scan positive suggesting biliary atresia (BA) and 7(27%) cases were scan negative. In BA there will be increased hepatic uptake of the radionuclide without any significant excretion even in 24 hours delayed images. Presence of radiotracer in the bowel exclude the diagnosis of BA. Early diagnosis of biliary atresia is very important because in this condition surgery should be performed early (within 60 days of life). Studies suggest that hepatobiliary scan after hepatic stimulation with phenobarbitone for a period of 3-5 days is highly accurate for differentiating biliary atresia from other causes of neonatal jaundice. It is very important to perform hepatobiliary scan in a case of neonatal jaundice to exclude biliary atresia for the sake of baby's life.(author)

  6. Obstacles to Industrial Implementation of Scanning Systems

    Science.gov (United States)

    Anders Astrom; Olog Broman; John Graffman; Anders Gronlund; Armas Jappinene; Jari Luostarinen; Jan Nystrom; Daniel L. Schmoldt

    1998-01-01

    Initially the group discussed what is meant by scanning systems. An operational definition was adopted to consider scanning system in the current context to be nontraditional scanning. Where, traditional scanning is defined as scanning that has been industrially operational and relatively common for several years-a mature technology. For example,...

  7. Surface characterization of weathered wood using a laser scanning system

    International Nuclear Information System (INIS)

    Arnold, M.; Lemaster, R.L.; Dost, W.A.

    1992-01-01

    Most of the existing methods to assess the effect of weathering on wood surfaces have some drawbacks that limit their use to specific tasks. The amount of surface erosion is often used as a measure for the weathering action. The application of a laser scanning system to reproduce surface profiles and to measure weathering erosion was tested on various samples and was found to be a very useful and superior alternative to existing methods. Further improvements of the system used can be made by refinements of the calibration procedures and by more comprehensive profile analyses. (author)

  8. Occupational and environmental lung disease.

    Science.gov (United States)

    Seaman, Danielle M; Meyer, Cristopher A; Kanne, Jeffrey P

    2015-06-01

    Occupational and environmental lung disease remains a major cause of respiratory impairment worldwide. Despite regulations, increasing rates of coal worker's pneumoconiosis and progressive massive fibrosis are being reported in the United States. Dust exposures are occurring in new industries, for instance, silica in hydraulic fracking. Nonoccupational environmental lung disease contributes to major respiratory disease, asthma, and COPD. Knowledge of the imaging patterns of occupational and environmental lung disease is critical in diagnosing patients with occult exposures and managing patients with suspected or known exposures. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. The Healing Nature of Occupation

    Directory of Open Access Journals (Sweden)

    Jennifer Fortuna

    2017-03-01

    Full Text Available Moses Hamilton, an artist based in Hawaii, provided the cover art for the Spring 2017 edition of The Open Journal of Occupational Therapy (OJOT. “Pali Kai” is a 11”x14” painting made from acrylic on canvas. When a tragic car accident left Hamilton paralyzed from the chest down, mouth painting provided an outlet for selfexpression and stress relief. Participation in a meaningful occupation helped Hamilton find his path in life. With their colorful impressionist-style, Hamilton’s paintings have brought happiness to people all over the world.

  10. Imaging of Occupational Lung Disease.

    Science.gov (United States)

    Champlin, Jay; Edwards, Rachael; Pipavath, Sudhakar

    2016-11-01

    Occupational lung diseases span a variety of pulmonary disorders caused by inhalation of dusts or chemical antigens in a vocational setting. Included in these are the classic mineral pneumoconioses of silicosis, coal worker's pneumoconiosis, and asbestos-related diseases as well as many immune-mediated and airway-centric diseases, and new and emerging disorders. Although some of these have characteristic imaging appearances, a multidisciplinary approach with focus on occupational exposure history is essential to proper diagnosis. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Occupational asthma in maritime environments

    DEFF Research Database (Denmark)

    Lucas, David; Loddé, Brice; Jepsen, Jørgen Riis

    2016-01-01

    In 2006 we published our first review based on the available literature on occupational asthma in maritime environments in the “International Maritime Health” journal. Since then, we have obtained a great deal of new knowledge on asthma in seafood workers and fishermen and on the impact...... of exposures from sulphites preservatives, container fumigants etc. in maritime workers. This review aims to provide an update of the current knowledge base about occupational asthma in a maritime context and to provide recommendations regarding medical surveillance of workers at risk....

  12. Occupation, hobbies, and acute leukemia in adults.

    Science.gov (United States)

    Terry, Paul D; Shore, David L; Rauscher, Garth H; Sandler, Dale P

    2005-10-01

    Occupational and industrial exposures have been implicated in the etiology of leukemia, yet uncertainty remains regarding potential high risk occupations. We examined the associations between self-reported occupations and hobbies and acute leukemia risk using data from 811 cases and 637 controls participating in a case-control study in the U.S. and Canada. We found that several occupations may increase the risk of acute leukemia, particularly occupations related to petroleum products, rubber, nuclear energy, munitions, plastics, and electronics manufacturing. Differences were noted according to histological type. Other occupations and hobbies were not clearly associated with risk.

  13. Interesting bone scans - unusual findings

    International Nuclear Information System (INIS)

    Dobson, M.; Wadhwa, S.S.; Mansberg, R.; Fernandes, V.B.

    1997-01-01

    A 59-year-old female with carcinoma of the colon and known liver metastatic disease was referred for bone scan to evaluate for bone metastases. Although no bone metastases were found, there was abnormal uptake noted in the liver corresponding to a metastatic calcified lesion. The only other findings were of degenerative disease in the cervical spine, right shoulder and small joints of the hands. A 69-year-old male with carcinoma of the prostate and right side low back pain was referred for bone scan. No focal abnormalities to suggest metastatic disease were identified; findings within the cervical spine, lumber spine and knees were presumed secondary to degenerative disease. Intermittent pain persisted and the patient was referred for a repeat bone scan six months later. Previous scan findings of degenerative disease and no metastatic disease were confirmed; however, closer inspection revealed an enlarged right kidney with significant retention of tracer in the pelvicalyceal system suggesting possible obstruction. A Retrograde pyelogram was performed, and no obvious obstruction demonstrated. As bone scan findings were very suggestive of obstruction, a DTPA scan with lasix was performed showing a dilated right collecting system with no functional obstruction. Given the degree of dilation, it is possible that the patient experiences intermittent PUJ obstruction causing his symptoms. A 33-year-old male with insulin dependent diabetes mellitus and viral arthritis was referred for a bone scan. A three phase revealed increased uptake in the region of the knee and leR proximal tibia. Delayed whole body images revealed multiple focal areas of osteoblastic activity in the leR tibia. Abnormal uptake was also seen in the upper third of the leR femur. The remainder of the skeletal survey was normal. X-ray correlation of the leR tibia and femoral findings was undertaken. Combinating unilateral changes on bone scan and X-ray although very suggestive of sclerotic polyostotic

  14. Scanning tunnel microscopy of semiconductor nanostructures

    International Nuclear Information System (INIS)

    Eder, C.

    1997-09-01

    In this work a scanning tunneling microscope (STM) is utilized as a surface sensitive tool for local characterization of internal potential profiles of GaAs/AlGaAs heterostructures. The STM is operated at variable temperatures under ambient conditions, i.e. either in air or in the variable temperature insert of a cryostat. Distinct local differences between current-voltage curves taken on inverted heterostructures, which were patterned by wet chemically etching, are found. The spectroscopic differences can be ascribed to the internal potential profile in the subsurface regions of the sample. Current imaging tunneling spectroscopy (CITS) is applied to study quantum wire regions. It is found that the magnitude of the CITS-current is an indirect measure of edge depletion zones, which are much larger at 4.2 K. Direct measurements of relevant energy levels in quantum structures were obtained by ballistic electron emission microscopy (BEEM). It is shown that this 3-terminal technique is an excellent tool for transport characterization of minibands formed in semiconductor superlattices. Furthermore, low dimensional electron gases are shown to act as very efficient collector electrodes at low temperatures. For the first time, BEEM experiments were performed at 4.2 K. The enhanced thermal resolution at 4.2 K allows an analysis of the relevant scattering processes. It is found that the collector current is strongly influenced by diffusive scattering at the metal/semiconductor interface. (author)

  15. Job-Occupation Misfit as an Occupational Stressor

    Science.gov (United States)

    Ford, Michael T.

    2012-01-01

    Drawing from theory on met expectations, person-environment fit, and social information processing, misfit between the pressure and autonomy experienced by workers and that which would be expected given their occupational roles was examined as a predictor of job satisfaction, perceived support, and depression. Results from a nationally (U.S.)…

  16. Occupational Asthma after Withdrawal from the Occupational Allergen Exposure

    Czech Academy of Sciences Publication Activity Database

    Klusáčková, P.; Pelclová, D.; Lebedová, J.; Marečková, H.; Brabec, Marek

    2006-01-01

    Roč. 44, č. 4 (2006), s. 629-638 ISSN 0019-8366 Source of funding: V - iné verejné zdroje Keywords : occupational asthma * allergen exposure withdrawal Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.911, year: 2006 http://www.jniosh.go.jp/en/indu_hel/pdf/indhealth_44_4_629.pdf

  17. Civilian law: from occupational medicine to occupational event.

    Science.gov (United States)

    Mpotos, N; Watelet, J B

    Civilian law:from occupational medicine to occupational event. Despite the growing importance of objective measurements, the health effects of many occupational risk factors are currently not fully quantified. Occupational noise, as a widespread risk factor, is illustrative in this regard; there is a strong body of evidence linking it to an important health outcome (hearing loss), but it is less decisively associated with others (such as psychological disorders). It is also distinct from environmental noise, and therefore falls under the responsibility of employers as well as individuals. Noise-induced hearing loss (NIHL) is, at present, incurable and irreversible. However, it is preventable, if effective and global hearing conservation programmes can be implemented. These programmes should not be isolated efforts, but should be integrated into the overall hazard prevention and control programme of the workplace. Belgian law encompasses a set of provisions for prevention and the protection of the health and safety of workers within the workplace, including aspects pertaining to the hygiene of the workplace and psychosocial aspects at work (stress, violence, bullying and sexual harassment, among others). In principle, combating environmental noise is fully addressed in this country. However, other levels of policy-making also play an important role in this regard. For example, the federal government is in charge of product standards, and therefore also of noise emission standards for products. The interpretation and enforcement of Belgian legislation on well-being at work converts European directives and international agreements on well-being at work into Belgian law.

  18. The boundary-scan handbook

    CERN Document Server

    Parker, Kenneth P

    2016-01-01

    Aimed at electronics industry professionals, this 4th edition of the Boundary Scan Handbook describes recent changes to the IEEE1149.1 Standard Test Access Port and Boundary-Scan Architecture. This updated edition features new chapters on the possible effects of the changes on the work of the practicing test engineers and the new 1149.8.1 standard. Anyone needing to understand the basics of boundary scan and its practical industrial implementation will need this book. Provides an overview of the recent changes to the 1149.1 standard and the effect of the changes on the work of test engineers;   Explains the new IEEE 1149.8.1 subsidiary standard and applications;   Describes the latest updates on the supplementary IEEE testing standards. In particular, addresses: IEEE Std 1149.1                      Digital Boundary-Scan IEEE Std 1149.4                      Analog Boundary-Scan IEEE Std 1149.6                      Advanced I/O Testing IEEE Std 1149.8.1           �...

  19. CAMAC gamma ray scanning system

    International Nuclear Information System (INIS)

    Moss, C.E.; Pratt, J.C.; Shunk, E.R.

    1981-01-01

    A flexible gamma-ray scanning system, based on a LeCroy 3500 multichannel analyzer and CAMAC modules, is described. The system is designed for making simultaneous passive and active scans of objects of interest to nuclear safeguards. The scanner is a stepping-motor-driven carriage; the detectors, a bismuth-germanate scintillator and a high-purity germanium detector. A total of sixteen peaks in the two detector-produced spectra can be integrated simultaneously, and any scan can be viewed during data acquisition. For active scanning, the 2615-keV gamma-ray line from a 232 U source and the 4439-keV gamma-ray line from 9 Be(α,n) 12 C were selected. The system can be easily reconfigured to accommodate up to seven detectors because it is based on CAMAC modules and FORTRAN. The system is designed for field use and is easily transported. Examples of passive and active scans are presented

  20. A laser sheet self-calibration method for scanning PIV

    Science.gov (United States)

    Knutsen, Anna N.; Lawson, John M.; Dawson, James R.; Worth, Nicholas A.

    2017-10-01

    Knowledge of laser sheet position, orientation, and thickness is a fundamental requirement of scanning PIV and other laser-scanning methods. This paper describes the development and evaluation of a new laser sheet self-calibration method for stereoscopic scanning PIV, which allows the measurement of these properties from particle images themselves. The approach is to fit a laser sheet model by treating particles as randomly distributed probes of the laser sheet profile, whose position is obtained via a triangulation procedure enhanced by matching particle images according to their variation in brightness over a scan. Numerical simulations and tests with experimental data were used to quantify the sensitivity of the method to typical experimental error sources and validate its performance in practice. The numerical simulations demonstrate the accurate recovery of the laser sheet parameters over range of different seeding densities and sheet thicknesses. Furthermore, they show that the method is robust to significant image noise and camera misalignment. Tests with experimental data confirm that the laser sheet model can be accurately reconstructed with no impairment to PIV measurement accuracy. The new method is more efficient and robust in comparison with the standard (self-) calibration approach, which requires an involved, separate calibration step that is sensitive to experimental misalignments. The method significantly improves the practicality of making accurate scanning PIV measurements and broadens its potential applicability to scanning systems with significant vibrations.

  1. Security scanning at 94GHz

    Science.gov (United States)

    Anderton, Rupert N.; Appleby, Roger; Beale, John E.; Coward, Peter R.; Price, Sean

    2006-05-01

    It is well known that millimetre waves can pass through clothing. In short range applications such as in the scanning of people for security purposes, operating at W band can be an advantage. The size of the equipment is decreased when compared to operation at Ka band and the equipments have similar performance. In this paper a W band mechanically scanned imager designed for imaging weapons and contraband hidden under clothing is discussed. This imager is based on a modified folded conical scan technology previously reported. In this design an additional optical element is added to give a Cassegrain configuration in image space. This increases the effective focal length and enables improved sampling of the image and provides more space for the receivers. This imager is constructed from low cost materials such as polystyrene, polythene and printed circuit board materials. The trade off between image spatial resolution and thermal sensitivity is discussed.

  2. Scanning Terahertz Heterodyne Imaging Systems

    Science.gov (United States)

    Siegel, Peter; Dengler, Robert

    2007-01-01

    Scanning terahertz heterodyne imaging systems are now at an early stage of development. In a basic scanning terahertz heterodyne imaging system, (see Figure 1) two far-infrared lasers generate beams denoted the local-oscillator (LO) and signal that differ in frequency by an amount, denoted the intermediate frequency (IF), chosen to suit the application. The LO beam is sent directly to a mixer as one of two inputs. The signal beam is focused to a spot on or in the specimen. After transmission through or reflection from the specimen, the beams are focused to a spot on a terahertz mixer, which extracts the IF outputs. The specimen is mounted on a translation stage, by means of which the focal spot is scanned across the specimen to build up an image.

  3. Scanning vector Hall probe microscopy

    International Nuclear Information System (INIS)

    Cambel, V.; Gregusova, D.; Fedor, J.; Kudela, R.; Bending, S.J.

    2004-01-01

    We have developed a scanning vector Hall probe microscope for mapping magnetic field vector over magnetic samples. The microscope is based on a micromachined Hall sensor and the cryostat with scanning system. The vector Hall sensor active area is ∼5x5 μm 2 . It is realized by patterning three Hall probes on the tilted faces of GaAs pyramids. Data from these 'tilted' Hall probes are used to reconstruct the full magnetic field vector. The scanning area of the microscope is 5x5 mm 2 , space resolution 2.5 μm, field resolution ∼1 μT Hz -1/2 at temperatures 10-300 K

  4. Footwear scanning systems and methods

    Science.gov (United States)

    Fernandes, Justin L.; McMakin, Douglas L.; Sheen, David M.; Tedeschi, Jonathan R.

    2017-07-25

    Methods and apparatus for scanning articles, such as footwear, to provide information regarding the contents of the articles are described. According to one aspect, a footwear scanning system includes a platform configured to contact footwear to be scanned, an antenna array configured to transmit electromagnetic waves through the platform into the footwear and to receive electromagnetic waves from the footwear and the platform, a transceiver coupled with antennas of the antenna array and configured to apply electrical signals to at least one of the antennas to generate the transmitted electromagnetic waves and to receive electrical signals from at least another of the antennas corresponding to the electromagnetic waves received by the others of the antennas, and processing circuitry configured to process the received electrical signals from the transceiver to provide information regarding contents within the footwear.

  5. Double-polarizating scanning radiometer

    International Nuclear Information System (INIS)

    Mishev, D.N.; Nazyrski, T.G.

    1986-01-01

    The double-polarizating single-channel scanning radiometer comprises the following serial connected parts: a scanning double-polarizating aerial, a block for polarization separation, a radiometer receiver, an analog-to-digit converter and an information flow forming block. The low frequency input of the radiometer receiver is connected with a control block, which is also connected with a first bus of a microprocessor, the second bus of which is connected with the A-D converter. The control input of the scanning double-polarizating aerial is connected with the first microprocessor bus. The control inputs of the block for polarization separation are linked by an electronic switch with the output of the forming block, the input of which is connected to the first input of the control block. The control inputs of the block for polarization separation are connected with the second and the third input of the information flow forming block. 2 cls

  6. Scanning probe microscopy competency development

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, M.E.; Reagor, D.W.; Jia, Quan Xi [and others

    1998-12-31

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The project collaborators developed an ultra-high vacuum scanning tunneling microscope (UHV-STM) capability, integrated it with existing scanning probe microscopes, and developed new, advanced air-based scanning force techniques (SPMs). Programmatic, basic, and industrially related laboratory research requires the existence of SPMs, as well as expertise capable of providing local nano-scale information. The UHV-STM capability, equipped with load-lock system and several surface science techniques, will allow introduction, examination, and reaction of surfaces prepared under well-controlled vacuum conditions, including the examination of morphology and local bonding associated with the initial stages of film growth under controlled growth conditions. The resulting capabilities will enable the authors to respond to a variety of problems requiring local characterization of conducting and nonconducting surfaces in liquids, air, and UHV.

  7. Towards inclusive occupational therapy: Introducing the CORE approach for inclusive and occupation-focused practice.

    Science.gov (United States)

    Pereira, Robert B

    2017-12-01

    Occupation is a human right and a social determinant of health. It is also taken for granted. Having access to, and participating in, occupation, is intricately linked to positive health and wellbeing. Despite theory and evidence to support the link between occupation, health and wellbeing, occupational therapists can struggle with applying an occupation focus in practice and knowing how to use occupational frameworks to enable occupation. The purpose of this paper is to introduce the Capabilities, Opportunities, Resources and Environments (CORE) approach for inclusive and occupation-focused practice. It provides occupational therapists with a means of operationalising occupational enablement and facilitating social inclusion. The CORE approach is introduced by linking its main ideas to Economist and Nobel Prize Laureate Amartya Sen's capabilities approach, as well as findings from the author's doctoral research into entrenched disadvantage and social inclusion. Practical questions guided by the CORE approach's acronym are given to explore how the approach can be utilised alongside other occupational models and frameworks to encourage strategies for effective enablement through occupation for social inclusion. As experts in enabling occupation, occupational therapists can use the CORE approach to design occupation-focused interventions and promote inclusive occupational therapy. © 2017 Occupational Therapy Australia.

  8. Logarithmic axicon characterized by scanning optical probe system.

    Science.gov (United States)

    Cao, Zhaolou; Wang, Keyi; Wu, Qinglin

    2013-05-15

    A scanning optical probe system is proposed to measure a logarithmic axicon (LA) with subwavelength resolution. Multiple plane intensity profiles measured by a fiber probe are interpreted by solving an optimization problem to get the phase retardation function (PRF) of the LA. Experimental results show that this approach can accurately obtain the PRF with which the optical path difference of the generated quasi-nondiffracting beam in the propagation is calculated.

  9. Producing colour pictures from SCAN

    International Nuclear Information System (INIS)

    Robichaud, K.

    1982-01-01

    The computer code SCAN.TSK has been written for use on the Interdata 7/32 minicomputer which will convert the pictures produced by the SCAN program into colour pictures on a colour graphics VDU. These colour pictures are a more powerful aid to detecting errors in the MONK input data than the normal lineprinter pictures. This report is intended as a user manual for using the program on the Interdata 7/32, and describes the method used to produce the pictures and gives examples of JCL, input data and of the pictures that can be produced. (U.K.)

  10. Linking world scan and image

    International Nuclear Information System (INIS)

    Timmer, H.; Alcamo, J.; Bollen, J.; Gielen, A.; Gerlach, R.; Den Ouden, A.; Zuidema, G.

    1995-01-01

    In march 1994 the Central Planning Bureau (CPB) in the Hague, the National Institute of Public Health and Environmental Protection (RIVM) in Bilthoven and the Institute of Environmental Studies (IES) in Amsterdam started the first phase of a joint research program aimed at creating integrated scenarios of the global economy, GHG emissions, and climate impacts. The goal of the first phase of this project was to design and test a linked version of the economic model WORLD SCAN of the former, and the climate model IMAGE 2 of the latter institute. This first phase has resulted in the planned test runs with an operational version of the linked models by May 1995. The experiences in the first year were encouraging, both in the scientific and the organizational sense. In a sense, a link was made between scientific disciplines: a coupling of disciplines concerning with global economic development and the global physical climate system is difficult and novel. The goal of the project was to integrate long-term economic developments and effects of climate change. Both the WORLD SCAN model and IMAGE 2 provide a consistent analysis of the global system, but from different perspectives. IMAGE 2 simulates climate change and its effects in a global context but treats the economic system as exogenous. WORLD SCAN covers the world economic system in a consistent manner but does not take into account the global environment. The links are constructed in the area of agriculture and energy. The basic idea is that WORLD SCAN determines demand and supply on economic principles, while IMAGE 2 provides information on changes of land area and average quality of productive land, and other damage costs based on its three sub-systems. The demand for energy is fed into IMAGE 2's Energy Industry subsystem (EIS), which in turn determines emissions of greenhouse gases. Furthermore, some additional output from WORLD SCAN on activity levels, prices and capital structure can be used to determine

  11. Advanced HEDL gamma scan system

    International Nuclear Information System (INIS)

    Smith, F.C.; Olson, R.N.

    1983-01-01

    The design of an advanced state-of-the-art gamma scan system built for the purpose of measuring the point-by-point gamma activity of irradiated fuel rods is described. The emphasis of the system design was to achieve the highest rate of throughput with the minimum per rod cost while maintaining system accuracy and reliability. Preliminary tests demonstrate that all system requirements were met or exceeded. The system provides improved throughput, precision, automation, flexibility, and data processing capability over previous gamma scan systems

  12. Climate Change and Human Occupation in Denmark and Syria

    DEFF Research Database (Denmark)

    Schrøder, Niels; Jensen, Gitte; Limborg, Magnus

    2007-01-01

    the main changes in human activities in the areas. It also confirms that the climatic histories of the sites are closely correlated - with strong ties to global causes of climate change. The NAO (North Atlantic Oscillation) caused contrasting rainfall conditions in Denmark and Levant. Over a period of one......Classical sites for studies of human occupation and climatic changes in Denmark and Syria - have been re-examined. A detailed geological/geophysical mapping of selected sites and geochemical /palynological analysis of cores/profiles confirms that climate change has been the decisive factor behind....... The changes in human occupation in Syria and in Denmark both seems to correlate with the proxies of climate change esp. the change from Atlantic to Subboreal around 4000BC, the change from Subboreal to Subatlantic around 500 BC are marked in as well the climate record and archaeological records (monsoon...

  13. Analytical scanning evanescent microwave microscope and control stage

    Science.gov (United States)

    Xiang, Xiao-Dong; Gao, Chen; Duewer, Fred; Yang, Hai Tao; Lu, Yalin

    2009-06-23

    A scanning evanescent microwave microscope (SEMM) that uses near-field evanescent electromagnetic waves to probe sample properties is disclosed. The SEMM is capable of high resolution imaging and quantitative measurements of the electrical properties of the sample. The SEMM has the ability to map dielectric constant, loss tangent, conductivity, electrical impedance, and other electrical parameters of materials. Such properties are then used to provide distance control over a wide range, from to microns to nanometers, over dielectric and conductive samples for a scanned evanescent microwave probe, which enable quantitative non-contact and submicron spatial resolution topographic and electrical impedance profiling of dielectric, nonlinear dielectric and conductive materials. The invention also allows quantitative estimation of microwave impedance using signals obtained by the scanned evanescent microwave probe and quasistatic approximation modeling. The SEMM can be used to measure electrical properties of both dielectric and electrically conducting materials.

  14. Examination of irradiated fuel elements using gamma scanning technique

    International Nuclear Information System (INIS)

    Ichim, O.; Mincu, M.; Man, I.; Stanica, M.

    2016-01-01

    The purpose of this paper is to validate the gamma scanning technique used to calculate the activity of gamma fission products from CANDU/TRIGA irradiated fuel elements. After a short presentation of the equipments used and their characteristics, the paper describes the calibration technique for the devices and how computed tomography reconstruction is done. Following the previously mentioned steps is possible to obtain the axial and radial profiles and the computed tomography reconstruction for calibration sources and for the irradiated fuel elements. The results are used to validate the gamma scanning techniques as a non-destructive examination method. The gamma scanning techniques will be used to: identify the fission products in the irradiated CANDU/TRIGA fuel elements, construct the axial and radial distributions of fission products, get the distribution in cross section through computed tomography reconstruction, and determine the nuclei number and the fission products activity of the irradiated CANDU/TRIGA fuel elements. (authors)

  15. Occupational Neurotoxic Diseases in Taiwan

    Directory of Open Access Journals (Sweden)

    Chi-Hung Liu

    2012-12-01

    Full Text Available Occupational neurotoxic diseases have become increasingly common in Taiwan due to industrialization. Over the past 40 years, Taiwan has transformed from an agricultural society to an industrial society. The most common neurotoxic diseases also changed from organophosphate poisoning to heavy metal intoxication, and then to organic solvent and semiconductor agent poisoning. The nervous system is particularly vulnerable to toxic agents because of its high metabolic rate. Neurological manifestations may be transient or permanent, and may range from cognitive dysfunction, cerebellar ataxia, Parkinsonism, sensorimotor neuropathy and autonomic dysfunction to neuromuscular junction disorders. This study attempts to provide a review of the major outbreaks of occupational neurotoxins from 1968 to 2012. A total of 16 occupational neurotoxins, including organophosphates, toxic gases, heavy metals, organic solvents, and other toxic chemicals, were reviewed. Peer-reviewed articles related to the electrophysiology, neuroimaging, treatment and long-term follow up of these neurotoxic diseases were also obtained. The heavy metals involved consisted of lead, manganese, organic tin, mercury, arsenic, and thallium. The organic solvents included n-hexane, toluene, mixed solvents and carbon disulfide. Toxic gases such as carbon monoxide, and hydrogen sulfide were also included, along with toxic chemicals including polychlorinated biphenyls, tetramethylammonium hydroxide, organophosphates, and dimethylamine borane. In addition we attempted to correlate these events to the timeline of industrial development in Taiwan. By researching this topic, the hope is that it may help other developing countries to improve industrial hygiene and promote occupational safety and health care during the process of industrialization.

  16. Occupational Accidents And Preventive Measures

    CERN Document Server

    Fassnacht, V

    2006-01-01

    This report presents the 2005 statistics concerning occupational accidents involving members of the CERN personnel and contractors' personnel. It sets out the accident frequency and severity rates and provides a breakdown of accidents by cause and injury. It also contains a summary analysis of the most serious accidents and the associated recommendations.

  17. Nuclear medicine : occupational health issues

    International Nuclear Information System (INIS)

    Rossleigh, M.

    1988-01-01

    The occupational health aspects of nuclear medicine are discussed. There is a lack of demonstrable biological effects from low level radiation. The radiation protection measures that are applied to ensure that staff are exposed to as low a level of radiation as is possible are outlined

  18. [Fatal occupational accidents in Lombardy].

    Science.gov (United States)

    Pianosi, G

    1995-01-01

    All fatal occupational accidents compensated in Lombardy from 1984 to 1989 were analyzed (1259 cases): significant differences between geographical distribution of fatal occupational accidents and workers were observed. Males accounted for about 95% of fatalities; an excess of cases was shown in both young and elderly workers. Death was the consequence of injuries involving most frequently the head, thorax and spinal cord. An excess of fatalities was observed in agriculture and, at a lower level, in manufacturing industries; small enterprises were involved in approximately 25% of fatalities occurring in the manufacturing industries and services. Employers were the victims of fatal accidents in 50% of cases in agriculture and in 70% of cases in craft industries. Construction, agriculture and transport accounted for about 50% of all fatalities. About 50% of fatal occupational accidents were related to vehicle use: the victim was the driver in the majority of cases, sometimes the victim was run over by a vehicle or fell from a vehicle. The results agree with some previous observations (e.g.: sex and age distribution; construction, agriculture and transport as working activities at high accident risk); but some original observations have emerged, in particular about the frequency of employers as victims and the role of vehicles in the genesis of fatal occupational accidents. If further studies confirm these latter observations, important developments could follow in preventive action design and implementation.

  19. Travel Agent. Occupational Simulation Kit.

    Science.gov (United States)

    Peterson, Wayne

    This career exploration instructional booklet on the travel agent's occupation is one of several resulting from the rural southwestern Colorado CEPAC Project (Career Education Process of Attitude Change). Based on a job analysis and utilizing a programed instructional format, the following content is included: A brief description of what a travel…

  20. Occupational diseases of dust etiology

    International Nuclear Information System (INIS)

    Sokolik, L.I.; Shkondin, A.N.

    1981-01-01

    Detailed etiologic and clinico-roentgenological characteristics of pneumoconiosis, as widely spread occupational disease caused by different kinds of dust, are given. The course of pneumoconiosis is discussed depending on working conditions of patients after the disease had been ascertained, as well as its complications, taking into account roentgeno-morphological types of fibrosis and the stages of the disease [ru