WorldWideScience

Sample records for scanning laser microscopy

  1. Laser scanning laser diode photoacoustic microscopy system.

    Science.gov (United States)

    Erfanzadeh, Mohsen; Kumavor, Patrick D; Zhu, Quing

    2018-03-01

    The development of low-cost and fast photoacoustic microscopy systems enhances the clinical applicability of photoacoustic imaging systems. To this end, we present a laser scanning laser diode-based photoacoustic microscopy system. In this system, a 905 nm, 325 W maximum output peak power pulsed laser diode with 50 ns pulsewidth is utilized as the light source. A combination of aspheric and cylindrical lenses is used for collimation of the laser diode beam. Two galvanometer scanning mirrors steer the beam across a focusing aspheric lens. The lateral resolution of the system was measured to be ∼21 μm using edge spread function estimation. No averaging was performed during data acquisition. The imaging speed is ∼370 A-lines per second. Photoacoustic microscopy images of human hairs, ex vivo mouse ear, and ex vivo porcine ovary are presented to demonstrate the feasibility and potentials of the proposed system.

  2. QUANTITATIVE CONFOCAL LASER SCANNING MICROSCOPY

    Directory of Open Access Journals (Sweden)

    Merete Krog Raarup

    2011-05-01

    Full Text Available This paper discusses recent advances in confocal laser scanning microscopy (CLSM for imaging of 3D structure as well as quantitative characterization of biomolecular interactions and diffusion behaviour by means of one- and two-photon excitation. The use of CLSM for improved stereological length estimation in thick (up to 0.5 mm tissue is proposed. The techniques of FRET (Fluorescence Resonance Energy Transfer, FLIM (Fluorescence Lifetime Imaging Microscopy, FCS (Fluorescence Correlation Spectroscopy and FRAP (Fluorescence Recovery After Photobleaching are introduced and their applicability for quantitative imaging of biomolecular (co-localization and trafficking in live cells described. The advantage of two-photon versus one-photon excitation in relation to these techniques is discussed.

  3. Optimal lens design and use in laser-scanning microscopy.

    NARCIS (Netherlands)

    Negrean, A.; Mansvelder, H.D.

    2014-01-01

    In laser-scanning microscopy often an off-the-shelf achromatic doublet is used as a scan lens which can reduce the available diffraction-limited field-of-view (FOV) by a factor of 3 and introduce chromatic aberrations that are scan angle dependent. Here we present several simple lens designs of

  4. Optomechatronics Design and Control for Confocal Laser Scanning Microscopy

    NARCIS (Netherlands)

    Yoo, H.W.

    2015-01-01

    Confocal laser scanning microscopy (CLSM) is considered as one of the major advancements in microscopy in the last century and is widely accepted as a 3D fluorescence imaging tool for biological studies. For the emerging biological questions CLSM requires fast imaging to detect rapid biological

  5. Investigations in optoelectronic image processing in scanning laser microscopy

    Science.gov (United States)

    Chaliha, Hiranya Kumar

    A considerable amount of work has been done on scann-ing laser microscopy since its applications were first pointed out by Roberts and Young[1], Minsky [2] and Davidovits et al [3]. The advent of laser has made it possible to focus an intense beam of laser light in a scanning optical microscope (SOM) [4, 5] and hence explore regions of microscopy[6] uncovered by conven-tional microscopy. In the simple SOM [7, 8, 9], the upper spatial frequency in amplitude transmittance or reflectance of an object for which transfer function is nonzero is same as that in a conventional optical microscope. However, in Type II SOM [7] or confocal SOM that employs a coherent or a point detector, the spatial frequency bandwidth is twice that obtained in a conventional microscope. Besides this confocal set-up is found to be very useful in optical sectioning and consequently in 3-D image processing[10, 11, 12] specially of biological specimens. Such systems are also suitable for studies of semiconductor materials [13], super-resolution [14] and various imaginative ways of image processing[15, 16, 17] including phase imaging[18]. A brief survey of related advances in scanning optical microscopy has been covered in the chapter 1 of the thesis. The performance of SOM may be investigated by concent-rating also on signal derived by one dimensional scan of the object specimen. This simplified mode may also be adapted to give wealth of information for biological and semiconductor specimens. Hence we have investigated the design of a scanning laser system suited specifically for studies of line scan image signals of microscopic specimens when probed through a focused laser spot. An electro-mechanical method of scanning of the object specimen has been designed with this aim in mind. Chapter 2, Part A of the thesis deals with the design consider-ations of such a system. For analysis of scan signals at a later instant of time so as to facilitate further processing, an arrangement of microprocessor

  6. [Advances of in vivo confocal scanning laser microscopy].

    Science.gov (United States)

    Tian, Ke-bin; Zhou, Guo-yu

    2006-02-01

    In vivo confocal scanning laser microscopy is being widely established as a time-saving, non-invasive, investigative methods in the study of body surfaces. Skin can be observed in its native state in vivo without the fixing, sectioning and staining that is necessary for routine histology. It is a new technology that can provide detailed images of tissue architecture and cellular morphology of living tissue. This paper reviews the fundamentals of in vivo confocal imaging and its clinical applications.

  7. Two-color two-photon fluorescence laser scanning microscopy.

    Science.gov (United States)

    Quentmeier, S; Denicke, S; Gericke, K-H

    2009-11-01

    We present the first realization of a Two-Color Two-Photon Laser-Scanning Microscope (2c2pLSM) and UV fluorescence images of cells acquired with this technique. Fluorescence is induced by two-color two-photon absorption using the fundamental and the second harmonic of a Ti:Sa femtosecond laser. Simultaneous absorption of an 800 nm photon and a 400 nm photon energetically corresponds to one-photon absorption at 266 nm. This technique for Laser-Scanning Microscopy extends the excitation wavelength range of a Ti:Sa powered fluorescence microscope to the UV. In addition to the known advantages of multi-photon microscopy like intrinsic 3D resolution, reduced photo damage and high penetration depth 2c2pLSM offers the possibility of using standard high numeric aperture objectives for UV fluorescence imaging. The effective excitation wavelength of 266 nm corresponds especially well to the excitation spectrum of tryptophan. Hence, it is an ideal tool for label free fluorescence studies and imaging of intrinsic protein fluorescence which originates mainly from tryptophan. Thus a very sensitive natural lifetime probe can be used for monitoring protein reactions or changes in conformation. First measurements of living MIN-6 cells reveal differences between the UV fluorescence lifetimes of the nucleus and cytoplasm. The significance of this method was further demonstrated by monitoring the binding of biotin to avidin.

  8. Quantitative single-molecule imaging by confocal laser scanning microscopy.

    Science.gov (United States)

    Vukojevic, Vladana; Heidkamp, Marcus; Ming, Yu; Johansson, Björn; Terenius, Lars; Rigler, Rudolf

    2008-11-25

    A new approach to quantitative single-molecule imaging by confocal laser scanning microscopy (CLSM) is presented. It relies on fluorescence intensity distribution to analyze the molecular occurrence statistics captured by digital imaging and enables direct determination of the number of fluorescent molecules and their diffusion rates without resorting to temporal or spatial autocorrelation analyses. Digital images of fluorescent molecules were recorded by using fast scanning and avalanche photodiode detectors. In this way the signal-to-background ratio was significantly improved, enabling direct quantitative imaging by CLSM. The potential of the proposed approach is demonstrated by using standard solutions of fluorescent dyes, fluorescently labeled DNA molecules, quantum dots, and the Enhanced Green Fluorescent Protein in solution and in live cells. The method was verified by using fluorescence correlation spectroscopy. The relevance for biological applications, in particular, for live cell imaging, is discussed.

  9. Further observations on cerebellar climbing fibers. A study by means of light microscopy, confocal laser scanning microscopy and scanning and transmission electron microscopy.

    Science.gov (United States)

    Castejón, O J; Castejón, H V; Alvarado, M V

    2000-12-01

    The intracortical pathways of climbing fibers were traced in several vertebrate cerebella using light microscopy, confocal laser scanning microscopy, scanning and transmission electron microscopy. They were identified as fine fibers up to 1(micron thick, with a characteristic crossing-over bifurcation pattern. Climbing fiber collaterals were tridimensionally visualized forming thin climbing fiber glomeruli in the granular layer. Confocal laser scanning microscopy revealed three types of collateral processes at the interface between granular and Purkinje cell layers. Scanning electron microscopy showed climbing fiber retrograde collaterals in the molecular layer. Asymmetric synaptic contacts of climbing fibers with Purkinje dendritic spines and stellate neuron dendrites were characterized by transmission electron microscopy. Correlative microscopy allowed us to obtain the basic three-dimensional morphological features of climbing fibers in several vertebrates and to show with more accuracy a higher degree of lateral collateralization of these fibers within the cerebellar cortex. The correlative microscopy approach provides new views in the cerebellar cortex information processing.

  10. Confocal laser scanning microscopy in study of bone calcification

    Science.gov (United States)

    Nishikawa, Tetsunari; Kokubu, Mayu; Kato, Hirohito; Imai, Koichi; Tanaka, Akio

    2012-12-01

    Bone regeneration in mandible and maxillae after extraction of teeth or tumor resection and the use of rough surface implants in bone induction must be investigated to elucidate the mechanism of calcification. The calcified tissues are subjected to chemical decalcification or physical grinding to observe their microscopic features with light microscopy and transmission electron microscopy where the microscopic tissue morphology is significantly altered. We investigated the usefulness of confocal laser scanning microscopy (CLSM) for this purpose. After staggering the time of administration of calcein and alizarin red to experimental rats and dogs, rat alveolar bone and dog femur grafted with coral as scaffold or dental implants were observed with CLSM. In rat alveolar bone, the calcification of newly-formed bone and net-like canaliculi was observed at the mesial bone from the roots progressed at the rate of 15 μm/day. In dog femur grafted with coral, newly-formed bones along the space of coral were observed in an orderly manner. In dog femur with dental implants, after 8 weeks, newly-formed bone proceeded along the rough surface of the implants. CLSM produced high-magnification images of newly-formed bone and thin sections were not needed.

  11. Confocal laser scanning microscopy-guided surgery for neurofibroma.

    Science.gov (United States)

    Koller, S; Horn, M; Weger, W; Massone, C; Smolle, J; Gerger, A

    2009-12-01

    The neurofibromatoses comprise at least two separate genetic disorders with variable clinical features and an unpredictable course. The most common type, neurofibromatosis 1, is characterized by > or = 6 café-au-lait spots and the occurrence of neurofibromas, which may present as cutaneous, subcutaneous or plexiform lesions. Normally, excision of neurofibromas is only indicated in the presence of neurological symptoms, suspicion of malignancy or for exceptional cosmetic reasons. For a good functional and aesthetic result with the least danger of recurrence, the surgeon's goal is to excise as much tissue as necessary and as little tissue as possible. One of the main issues during the surgical procedure is to distinguish between neurofibroma and surrounding tissue. We report for the first time the use of confocal laser scanning microscopy to differentiate between neurofibroma and healthy skin.

  12. Confocal laser scanning microscopy in study of bone calcification

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, Tetsunari, E-mail: tetsu-n@cc.osaka-dent.ac.jp [Department of Oral Pathology, Osaka Dental University, Osaka (Japan); Kokubu, Mayu; Kato, Hirohito [Department of Oral Pathology, Osaka Dental University, Osaka (Japan); Imai, Koichi [Department of Biomaterials, Osaka Dental University, Osaka (Japan); Tanaka, Akio [Department of Oral Pathology, Osaka Dental University, Osaka (Japan)

    2012-12-01

    Highlights: Black-Right-Pointing-Pointer High-magnification images with depth selection, and thin sections were observed using CLSM. Black-Right-Pointing-Pointer The direction and velocity of calcification of the bone was observed by administration of 2 fluorescent dyes. Black-Right-Pointing-Pointer In dog femora grafted with coral blocks, newly-formed bone was observed in the coral block space with a rough surface. Black-Right-Pointing-Pointer Twelve weeks after dental implant was grafted in dog femora, the space between screws was filled with newly-formed bones. - Abstract: Bone regeneration in mandible and maxillae after extraction of teeth or tumor resection and the use of rough surface implants in bone induction must be investigated to elucidate the mechanism of calcification. The calcified tissues are subjected to chemical decalcification or physical grinding to observe their microscopic features with light microscopy and transmission electron microscopy where the microscopic tissue morphology is significantly altered. We investigated the usefulness of confocal laser scanning microscopy (CLSM) for this purpose. After staggering the time of administration of calcein and alizarin red to experimental rats and dogs, rat alveolar bone and dog femur grafted with coral as scaffold or dental implants were observed with CLSM. In rat alveolar bone, the calcification of newly-formed bone and net-like canaliculi was observed at the mesial bone from the roots progressed at the rate of 15 {mu}m/day. In dog femur grafted with coral, newly-formed bones along the space of coral were observed in an orderly manner. In dog femur with dental implants, after 8 weeks, newly-formed bone proceeded along the rough surface of the implants. CLSM produced high-magnification images of newly-formed bone and thin sections were not needed.

  13. Reflection across plant cell boundaries in confocal laser scanning microscopy.

    Science.gov (United States)

    Liu, D Y T; Kuhlmey, B T; Smith, P M C; Day, D A; Faulkner, C R; Overall, R L

    2008-08-01

    The fluorescence patterns of proteins tagged with the green fluorescent protein (GFP) and its derivatives are routinely used in conjunction with confocal laser scanning microscopy to identify their sub-cellular localization in plant cells. GFP-tagged proteins localized to plasmodesmata, the intercellular junctions of plants, are often identified by single or paired punctate labelling across the cell wall. The observation of paired puncta, or 'doublets', across cell boundaries in tissues that have been transformed through biolistic bombardment is unexpected if there is no intercellular movement of the GFP-tagged protein, since bombardment usually leads to the transformation of single, isolated cells. We expressed a putative plasmodesmal protein tagged with GFP by bombarding Allium porrum epidermal cells and assessed the nature of the doublets observed at the cell boundaries. Doublets were formed when fluorescent spots were abutting a cell boundary and were only observable at certain focal planes. Fluorescence emitted from the half of a doublet lying outside the transformed cells was polarized. Optical simulations performed using finite-difference time-domain computations showed a dramatic distortion of the confocal microscope's point spread function when imaging voxels close to the plant cell wall due to refractive index differences between the wall and the cytosol. Consequently, axially and radially out-of-focus light could be detected. A model of this phenomenon suggests how a doublet may form when imaging only a single real fluorescent body in the vicinity of a plant cell wall using confocal microscopy. We suggest, therefore, that the appearance of doublets across cell boundaries is insufficient evidence for plasmodesmal localization due to the effects of the cell wall on the reflection and scattering of light.

  14. Comparison between optical-resolution photoacoustic microscopy and confocal laser scanning microscopy for turbid sample imaging.

    Science.gov (United States)

    U-Thainual, Paweena; Kim, Do-Hyun

    2015-12-01

    Optical-resolution photoacoustic microscopy (ORPAM) in theory provides lateral resolution equivalent to the optical diffraction limit. Scattering media, such as biological turbid media, attenuates the optical signal and also alters the diffraction-limited spot size of the focused beam. The ORPAM signal is generated only from a small voxel in scattering media with dimensions equivalent to the laser spot size after passing through scattering layers and is detected by an acoustic transducer, which is not affected by optical scattering. Thus, both ORPAM and confocal laser scanning microscopy (CLSM) reject scattered light. A multimodal optical microscopy platform that includes ORPAM and CLSM was constructed, and the lateral resolution of both modes was measured using patterned thin metal film with and without a scattering barrier. The effect of scattering media on the lateral resolution was studied using different scattering coefficients and was compared to computational results based on Monte Carlo simulations. It was found that degradation of lateral resolution due to optical scattering was not significant for either ORPAM or CLSM. The depth discrimination capability of ORPAM and CLSM was measured using microfiber embedded in a light scattering phantom material. ORPAM images demonstrated higher contrast compared to CLSM images partly due to reduced acoustic signal scattering.

  15. Spectral analysis of irregular roughness artifacts measured by atomic force microscopy and laser scanning microscopy.

    Science.gov (United States)

    Chen, Yuhang; Luo, Tingting; Ma, Chengfu; Huang, Wenhao; Gao, Sitian

    2014-12-01

    Atomic force microscopy (AFM) and laser scanning microscopy (LSM) measurements on a series of specially designed roughness artifacts were performed and the results characterized by spectral analysis. As demonstrated by comparisons, both AFM and LSM can image the complex structures with high resolution and fidelity. When the surface autocorrelation length increases from 200 to 500 nm, the cumulative power spectral density spectra of the design, AFM and LSM data reach a better agreement with each other. The critical wavelength of AFM characterization is smaller than that of LSM, and the gap between the measured and designed critical wavelengths is reduced with an increase in the surface autocorrelation length. Topography measurements of surfaces with a near zero or negatively skewed height distribution were determined to be accurate. However, obvious discrepancies were found for surfaces with a positive skewness owing to more severe dilations of either the solid tip of the AFM or the laser tip of the LSM. Further surface parameter evaluation and template matching analysis verified that the main distortions in AFM measurements are tip dilations while those in LSM are generally larger and more complex.

  16. Plastic-to-Elastic Transition in Aggregated Emulsion Networks, Studied with Atomic Force Microscopy-Confocal Scanning Laser Microscopy Microrheology

    NARCIS (Netherlands)

    Filip, D.; Duits, Michael H.G.; Uricanu, V.I.; Mellema, J.

    2006-01-01

    In this paper, we demonstrate how the simultaneous application of atomic force microscopy (AFM) and confocal scanning laser microscopy (CSLM) can be used to characterize the (local) rheological properties of soft condensed matter at micrometer length scales. Measurement of AFM force curves as a

  17. DTAF: an efficient probe to study cyanobacterial-plant interaction using confocal laser scanning microscopy (CLSM)

    NARCIS (Netherlands)

    Ahmed, M.; Stal, L.J.; Hasnain, S.

    2011-01-01

    A variety of microscopic techniques have been utilized to study cyanobacterial associations with plant roots, but confocal laser scanning microscopy (CLSM) is the least used due to the unavailability of a suitable fluorescent dye. Commonly used lectins have problems with their binding ability with

  18. DTAF: an efficient probe to study cyanobacterial-plant interaction using confocal laser scanning microscopy (CLSM).

    NARCIS (Netherlands)

    Ahmed, M.; Stal, L.J.; Hasnain, S.

    2011-01-01

    A variety of microscopic techniques have been utilized to study cyanobacterial associations with plant roots, but confocal laser scanning microscopy (CLSM) is the least used due to the unavailability of a suitable fluorescent dye. Commonly used lectins have problems with their binding ability with

  19. Imaging inclusion complex formation in starch granules using confocal laser scanning microscopy

    NARCIS (Netherlands)

    Manca, Marianna; Woortman, Albert J. J.; Loos, Katja; Loi, Maria A.

    The tendency of amylose to form inclusion complexes with guest molecules has been an object of wide interest due to its fundamental role in food processing. Here we investigated the features of starch granules from several botanical sources using confocal laser scanning microscopy (CLSM) and

  20. Confocal laser scanning microscopy. Using new technology to answer old questions in forensic investigations.

    Science.gov (United States)

    Turillazzi, Emanuela; Karch, Steven B; Neri, Margherita; Pomara, Cristoforo; Riezzo, Irene; Fineschi, Vittorio

    2008-03-01

    Confocal laser scanning microscopy (CLSM) is a relatively new technique for microscopic imaging. It has found a wide field of application in the general sphere of biological sciences. It has completely changed the study of cells and tissues by allowing greater resolution, optical sectioning of the sample and three-dimensional sanoke reconstruction. Confocal microscopy represents a valid, precious and useful tool capable of providing data (images) of unrivalled clearness and definition. This review discusses the possible applications of confocal microscopy in specific fields of forensic investigation, with specific regard to ballistics, forensic histopathology and toxicological pathology.

  1. Evaluation of Yogurt Microstructure Using Confocal Laser Scanning Microscopy and Image Analysis

    DEFF Research Database (Denmark)

    Skytte, Jacob Lercke; Ghita, Ovidiu; Whelan, Paul F.

    2015-01-01

    The microstructure of protein networks in yogurts defines important physical properties of the yogurt and hereby partly its quality. Imaging this protein network using confocal scanning laser microscopy (CSLM) has shown good results, and CSLM has become a standard measuring technique for fermented...... to image texture description. Here, CSLM images from a yogurt fermentation study are investigated, where production factors including fat content, protein content, heat treatment, and incubation temperature are varied. The descriptors are evaluated through nearest neighbor classification, variance analysis...

  2. Observation of mesenteric microcirculatory disturbance in rat by laser oblique scanning optical microscopy

    Science.gov (United States)

    Ding, Yichen; Zhang, Yu; Peng, Tong; Lu, Yiqing; Jin, Dayong; Ren, Qiushi; Liu, Yuying; Han, Jingyan; Xi, Peng

    2013-05-01

    Ischemia-reperfusion (I/R) injury model has been widely applied to the study of microcirculation disturbance. In this work, we used laser oblique scanning optical microscopy (LOSOM) to observe the microcirculation system in the mesentery of rat model. Utilizing a localized point-scanning detection scheme, high-contrast images of leukocytes were obtained. The extended detection capability facilitated both the automatic in vivo cell counting and the accurate measurement of the rolling velocity of leukocytes. Statistical analysis of the different treatment groups suggested that the distinction between I/R and sham groups with time lapse is significant.

  3. All-optical histology using two photon laser scanning microscopy and ablation with ultrashort pulses

    Science.gov (United States)

    Tsai, Philbert S.

    This dissertation discusses the use of ultrashort laser pulses to image and manipulate tissue for the purpose of three-dimensional histological reconstruction of extended brain structures. Two photon laser scanning microscopy (TPLSM) and ultrashort pulsed laser ablation are used to provide in situ three-dimensional imaging through thick preparations of fixed tissue. Surface regions of fixed tissue are first imaged using TPLSM. The imaged regions are then removed by ablation with amplified, ultrashort laser pulses, thereby exposing a previously underlying tissue region for imaging. This process of imaging and ablation proceeds iteratively until the desired tissue volume has been processed. First, the principles, design, and construction of a two photon laser scanning microscope are discussed, followed by a discussion of the physical mechanisms of tissue ablation with ultrashort laser pulses. The compatibility of tissue ablation using ultrashort pulses with subsequent histological analysis, particularly with fluorescent microscopy, is evaluated. Tissue ablation with ultrashort laser pulses is found to produce ablated tissue surfaces that are smooth to within a micrometer. Intrinsic fluorescence as well as immunoreactivity are found to be resilient to the ablation process. The all-optical histological technique is demonstrated on brain tissue from rats and mice, including tissue from embryonic mouse as early at E15. The ablation process is shown to preserve both macroscopic and microscopic structures within tissue. To facilitate the all-optical histological analysis of neuronal vasculature and its relative distribution to surrounding neuronal tissue, a fluorescent gel perfusion technique is developed that provides a temperature-stabilized fluorescent label of the neuronal vasculature. The use of immunohistochemistry to label specific cell populations throughout an 800 micrometer-thick tissue section is demonstrated. Additionally, the immersion of fixed tissue in high

  4. Revisit laser scanning fluorescence microscopy performance under fluorescence-lifetime-limited regime

    Science.gov (United States)

    Chan, Antony C.; Wong, Terence T. W.; Wong, Kenneth K. Y.; Lam, Edmund Y.; Tsia, Kevin K.

    2014-03-01

    Continuing desire for higher-speed laser scanning fluorescence microscopy (LSFM) and progressive advancement in ultrafast and sensitive photodetectors might imply that our conventional understanding of LSFM is not adequate when approaching to the intrinsic speed limit — fluorescence lifetime. In this regard, we here revisit the theoretical framework of LSFM and evaluate its general performance in lifetime-limited and noise-limited regimes. Our model suggests that there still exists an order-of-magnitude gap between the current LSFM speed and the intrinsic limit. An imaging frame rate of > 100 kHz could be viable with the emerging laser-scanning techniques using ultrafast wavelength-swept sources, or optical time-stretch.

  5. Spatiotemporal Rank Filtering Improves Image Quality Compared to Frame Averaging in 2-Photon Laser Scanning Microscopy.

    Directory of Open Access Journals (Sweden)

    Henry Pinkard

    Full Text Available Live imaging of biological specimens using optical microscopy is limited by tradeoffs between spatial and temporal resolution, depth into intact samples, and phototoxicity. Two-photon laser scanning microscopy (2P-LSM, the gold standard for imaging turbid samples in vivo, has conventionally constructed images with sufficient signal-to-noise ratio (SNR generated by sequential raster scans of the focal plane and temporal integration of the collected signals. Here, we describe spatiotemporal rank filtering, a nonlinear alternative to temporal integration, which makes more efficient use of collected photons by selectively reducing noise in 2P-LSM images during acquisition. This results in much higher SNR while preserving image edges and fine details. Practically, this allows for at least a four fold decrease in collection times, a substantial improvement for time-course imaging in biological systems.

  6. Combined nanoprobes for scanning probe microscopy: laser technology for processing and testing

    Science.gov (United States)

    Veiko, V. P.; Golubok, A. O.; Zuong, Z.; Varkentina, N. V.; Yakovlev, E. B.

    2008-02-01

    Scanning probe microscopy (SPM) is a high spatial resolution method of surface topography visualization and measurement of its local properties. The detecting of interaction arising between the sharp solid-state probe and the sample surface is the foundation of SPM. In dependence from nature of this interaction the scanning tunnel microscopy (STM), scanning force microscopy (SFM), scanning near field optical microscopy (SNOM), etc. are distinguished. The spatial resolution of all types of probe microscopy determins both sharpness of increasing of interaction between a probe and a sample at their approach, and shape and size of a top of a solid-state probe. So, the progress in SPM information capabilities is highly depends from probe properties and first of all from properly fabricated aperture size. Fabrication procedures are rather complicated because of nanometric scale size of aperture and hard requirements to reproducibility and need to be improved. The way how to do it is involving of feed-back in a processing procedure-results in two types of feedback for the process of drawing-out has been suggested, tested and installed into the technological set-up. Different probes have been fabricated by laser-assisted drawing-out during this work: SNOM types from optical fibers, micropipettes from quartz glass capillaries, micropipettes with microwires inside and with metallic covers outside. Some examples of application of above mentioned combined probes for cell membrane technology are described. Most important from them are topographical studying of cells and bacteria in living condition (in liquid) and studying of the mechanical properties of cell (rigidity of cell membrane) using the nanopipette as a tip of a force sensor. Also measurement of ion current that runs through cell membrane during its metabolic process using the nanopipette as well as in the well-known patch-clamp method have been done.

  7. In vivo measurements of skin barrier: comparison of different methods and advantages of laser scanning microscopy

    Science.gov (United States)

    Patzelt, A.; Sterry, W.; Lademann, J.

    2010-12-01

    A major function of the skin is to provide a protective barrier at the interface between external environment and the organism. For skin barrier measurement, a multiplicity of methods is available. As standard methods, the determination of the transepidermal water loss (TEWL) as well as the measurement of the stratum corneum hydration, are widely accepted, although they offer some obvious disadvantages such as increased interference liability. Recently, new optical and spectroscopic methods have been introduced to investigate skin barrier properties in vivo. Especially, laser scanning microscopy has been shown to represent an excellent tool to study skin barrier integrity in many areas of relevance such as cosmetology, occupation, diseased skin, and wound healing.

  8. SCANNING ELECTRON MICROSCOPY OF THE RAT ADRENAL GLAND AFTER SURGICAL LASER EXPOSURE

    Directory of Open Access Journals (Sweden)

    K. G. Kemoklidze

    2016-01-01

    Full Text Available Aim. We studied via low vacuum scanning electron microscopy the effects of a surgical laser exposure to adrenal glands and results of regeneration processes after. Materials and methods.Purpose of this work is modeling of effects of the removal with a surgical laser a pathological focus in the adrenal glands. For this Wistar male rat (n = 19 adrenal glands were researched without the laser exposure, immediately after it and 1 month later. Results. Immediately after exposure occurs laser ablation crater with rough edges and melted surface penetrated by equidistant pores, which are footprints of blood vessels. Beneath of the surface are numerous vaporizationbubbles. Around the crater, the surface wrinkles and sags due to decreased ability to retain water. 1 month after the laser damage, the affected area tightened by a scar. Its coarse bundles of collagen fibers braid shapeless lumps of coal and caverns. Tissues with normal appearance are close to the scar, both outside and inside of the organ. The wrinkling and the sagging are absent. The undamaged organ part has retained the previous shape, without hypertrophies. The damaged part has shrunk. The nature of the regeneration processes indicates a low probability of a relapse after the destruction of a pathological focus via the surgical laser exposure.

  9. Anticipating, measuring, and minimizing MEMS mirror scan error to improve laser scanning microscopy's speed and accuracy.

    Science.gov (United States)

    Giannini, John P; York, Andrew G; Shroff, Hari

    2017-01-01

    We describe a method to speed up microelectromechanical system (MEMS) mirror scanning by > 20x, while also improving scan accuracy. We use Landweber deconvolution to determine an input voltage which would produce a desired output, based on the measured MEMS impulse response. Since the MEMS is weakly nonlinear, the observed behavior deviates from expectations, and we iteratively improve our input to minimize this deviation. This allows customizable MEMS angle vs. time with <1% deviation from the desired scan pattern. We demonstrate our technique by optimizing a point scanning microscope's raster patterns to image mammal submandibular gland and pollen at ~10 frames/s.

  10. Telocytes and putative stem cells in the lungs: electron microscopy, electron tomography and laser scanning microscopy.

    Science.gov (United States)

    Popescu, Laurentiu M; Gherghiceanu, Mihaela; Suciu, Laura C; Manole, Catalin G; Hinescu, Mihail E

    2011-09-01

    This study describes a novel type of interstitial (stromal) cell - telocytes (TCs) - in the human and mouse respiratory tree (terminal and respiratory bronchioles, as well as alveolar ducts). TCs have recently been described in pleura, epicardium, myocardium, endocardium, intestine, uterus, pancreas, mammary gland, etc. (see www.telocytes.com ). TCs are cells with specific prolongations called telopodes (Tp), frequently two to three per cell. Tp are very long prolongations (tens up to hundreds of μm) built of alternating thin segments known as podomers (≤ 200 nm, below the resolving power of light microscope) and dilated segments called podoms, which accommodate mitochondria, rough endoplasmic reticulum and caveolae. Tp ramify dichotomously, making a 3-dimensional network with complex homo- and heterocellular junctions. Confocal microscopy reveals that TCs are c-kit- and CD34-positive. Tp release shed vesicles or exosomes, sending macromolecular signals to neighboring cells and eventually modifying their transcriptional activity. At bronchoalveolar junctions, TCs have been observed in close association with putative stem cells (SCs) in the subepithelial stroma. SCs are recognized by their ultrastructure and Sca-1 positivity. Tp surround SCs, forming complex TC-SC niches (TC-SCNs). Electron tomography allows the identification of bridging nanostructures, which connect Tp with SCs. In conclusion, this study shows the presence of TCs in lungs and identifies a TC-SC tandem in subepithelial niches of the bronchiolar tree. In TC-SCNs, the synergy of TCs and SCs may be based on nanocontacts and shed vesicles.

  11. Imaging hyphal growth of Physisporinus vitreus in Norway spruce wood by means of confocal laser scanning microscopy (CLSM)

    OpenAIRE

    Schubert, Mark; Stührk, Chris; Fuhr, Matthias J.; Schwarze, Francis W.M.R.

    2017-01-01

    Light microscopy and electron microscopy are the most common methods for analyzing wood-decay fungi. However, the 3D visualization and quantification of the filamentous structure of fungi in wood is difficult to realize by means of these traditional techniques. In the present work, confocal laser scanning microscopy (CLSM) was further developed for the quantitative imaging of the 3D microscopic hyphal growth of Physisporinus vitreus, a versatile fungus for engineering value-added wood product...

  12. Scanning a microhabitat: plant-microbe interactions revealed by confocal laser microscopy.

    Science.gov (United States)

    Cardinale, Massimiliano

    2014-01-01

    No plant or cryptogam exists in nature without microorganisms associated with its tissues. Plants as microbial hosts are puzzles of different microhabitats, each of them colonized by specifically adapted microbiomes. The interactions with such microorganisms have drastic effects on the host fitness. Since the last 20 years, the combination of microscopic tools and molecular approaches contributed to new insights into microbe-host interactions. Particularly, confocal laser scanning microscopy (CLSM) facilitated the exploration of microbial habitats and allowed the observation of host-associated microorganisms in situ with an unprecedented accuracy. Here I present an overview of the progresses made in the study of the interactions between microorganisms and plants or plant-like organisms, focusing on the role of CLSM for the understanding of their significance. I critically discuss risks of misinterpretation when procedures of CLSM are not properly optimized. I also review approaches for quantitative and statistical analyses of CLSM images, the combination with other molecular and microscopic methods, and suggest the re-evaluation of natural autofluorescence. In this review, technical aspects were coupled with scientific outcomes, to facilitate the readers in identifying possible CLSM applications in their research or to expand their existing potential. The scope of this review is to highlight the importance of confocal microscopy in the study of plant-microbe interactions and also to be an inspiration for integrating microscopy with molecular techniques in future researches of microbial ecology.

  13. Scanning a microhabitat: plant-microbe interactions revealed by confocal laser microscopy

    Directory of Open Access Journals (Sweden)

    Massimiliano eCardinale

    2014-03-01

    Full Text Available No plant or cryptogam exists in nature without microorganisms associated with its tissues. Plants as microbial hosts are puzzles of different microhabitats, each of them colonized by specifically adapted microbiomes. The interactions with such microorganisms have drastic effects on the host fitness. Since the last 20 years, the combination of microscopic tools and molecular approaches contributed to new insights into microbe-host interactions. Particularly, confocal laser scanning microscopy (CLSM facilitated the exploration of microbial habitats and allowed the observation of host-associated microorganisms in situ with an unprecedented accuracy. Here I present an overview of the progresses made in the study of the interactions between microorganisms and plants or plant-like organisms, focusing on the role of CLSM for the understanding of their significance. I critically discuss risks of misinterpretation when procedures of CLSM are not properly optimized. I also review approaches for quantitative and statistical analyses of CLSM images, the combination with other molecular and microscopic methods, and suggest the re-evaluation of natural autofluorescence. In this review, technical aspects were coupled with scientific outcomes, to facilitate the readers in identifying possible CLSM applications in their research or to expand their existing potential. The scope of this review is to highlight the importance of confocal microscopy in the study of plant-microbe interactions and also to be an inspiration for integrating microscopy with molecular techniques in future researches of microbial ecology.

  14. Analysis of the melanin distribution in different ethnic groups by in vivo laser scanning microscopy

    Science.gov (United States)

    Antoniou, C.; Lademann, J.; Richter, H.; Astner, S.; Patzelt, A.; Zastrow, L.; Sterry, W.; Koch, S.

    2009-05-01

    The aim of this study was to determine whether Laser scanning confocal microscopy (LSM) is able to visualize differences in melanin content and distribution in different Skin Phototypes. The investigations were carried out on six healthy volunteers with Skin Phototypes II, IV, and VI. Representative skin samples of Skin Phototypes II, V, and VI were obtained for histological analysis from remaining tissue of skin grafts and were used for LSM-pathologic correlation. LSM evaluation showed significant differences in melanin distribution in Skin Phototypes II, IV, and VI, respectively. Based on the differences in overall reflectivity and image brightness, a visual evaluation scheme showed increasing brightness of the basal and suprabasal layers with increasing Skin Phototypes. The findings correlated well with histological analysis. The results demonstrate that LSM may serve as a promising adjunctive tool for real time assessment of melanin content and distribution in human skin, with numerous clinical applications and therapeutic and preventive implications.

  15. Fluorescence Readout of a Patch Clamped Membrane by Laser Scanning Microscopy.

    Science.gov (United States)

    Gerhardt, Matthias; Walz, Michael; Beta, Carsten

    2016-01-01

    In this chapter, we describe how to shield a patch of a cell membrane against extracellularly applied chemoattractant stimuli. Classical patch clamp methodology is applied to allow for controlled shielding of a membrane patch by measuring the seal resistivity. In Dictyostelium cells, a seal resistivity of 50 MΩ proved to be tight enough to exclude molecules from diffusing into the shielded membrane region. This allowed for separating a shielded and a non-shielded region of a cell membrane to study the spatiotemporal dynamics of intracellular chemotactic signaling events at the interface between shielded and non-shielded areas. The spatiotemporal dynamics of signaling events in the membrane was read out by means of appropriate fluorescent markers using laser scanning confocal microscopy.

  16. Fluorescence confocal laser scanning microscopy for in vivo imaging of epidermal reactions to two experimental irritants

    DEFF Research Database (Denmark)

    Suihko, C.; Serup, J.

    2008-01-01

    Background: Fibre-optic fluorescence confocal laser scanning microscopy (CLSM) is a novel non-invasive technique for in vivo imaging of skin. The cellular structure of the epidermis can be studied. A fluorophore, e.g. fluorescein sodium, is introduced by an intradermal injection or applied...... dermatitis reactions caused by established model irritants, e.g. sodium lauryl sulphate (SLS) and pelargonic acid (PA). Methods: Twelve healthy individuals volunteered. The flexor aspect of the right and the left forearm was exposed to SLS in water and PA in isopropanol and occluded under Finn Chambers...... for 24 h. The reactions were rated clinically and, following epicutaneous and intra-dermal application of fluorescein sodium, studied by fluorescence CLSM, magnification x 1000. Results: Both irritants disturbed the epidermal intercellular borders, which became blurred, thickened and variably altered...

  17. Trypan blue as a fluorochrome for confocal laser scanning microscopy of arbuscular mycorrhizae in three mangroves.

    Science.gov (United States)

    Kumar, T; Majumdar, A; Das, P; Sarafis, V; Ghose, M

    2008-06-01

    Roots of three mangroves, Acanthus ilicifolius, Ceriops tagal and Excoecaria agallocha, collected from forests of the Sundarbans of India were stained with trypan blue to observe arbuscular mycorrhizal colonization. Spores of arbuscular mycorrhizal fungi isolated from rhizospheric soil, collected together with the root samples, also were stained for testing the suitability of the dye as a fluorochrome. Confocal laser scanning microscopy images were constructed. A. ilicifolius and E. agallocha exhibited "Arum" type colonization with highly branched arbuscules, whereas C. tagal showed "Paris" type association with clumped and collapsed arbuscules. We demonstrated that trypan blue is a suitable fluorochrome for staining arbuscular mycorrhizal fungal spores, fungal hyphae, arbuscules and vesicles, which presumably have a considerable amount of surface chitin. It appears that as the integration of chitin into the fungal cell wall changes, its accessibility to trypan blue dye also changes.

  18. Observation of photodynamically-induced cell destruction probed by video microscopy, laser-scanning microscopy, and fluorescence spectroscopy

    Science.gov (United States)

    Rueck, Angelika C.; Strauss, Wolfgang S. L.; Gschwend, Michael H.; Koenig, Karsten; Brunner, B.; Schneckenburger, Herbert; Walt, Heinrich; Steiner, Rudolf W.

    1993-07-01

    In order to study light-induced reactions during PDT, the fluorescence response of the photosensitizer meso-tetra(4-sulfonatophenyl)porphyrin (TPPS4) was observed in different cell systems and correlated with the sensitivity to photodynamic induced destructions. RR 1022 epithelial cells from the rat were grown on microscopic slides at a high and low cell density. Using video microscopy in combination with microspectrofluorometry we observed a different fluorescence behavior for high and low cell conditions during light exposure. A fluorescence relocalization from the cytoplasm to the nucleus and an intensity increase-- correlated with the formation of a new molecular species--could be detected only for low cell density. Moreover, cell cultures at a high density showed to be less sensitive to photodynamic destructions. In addition to cell culture-experiments, we observed the light-induced reactions of TPPS4 accumulated in multicellular tumor spheroids. For these measurements laser scanning microscopy was used. Fluorescence relocalization and intensity increase could be detected only for the peripheric parts of the spheroids. The different fluorescence response seems to reflect different metabolic and physiologic states of the cells.

  19. Scanning ultrafast electron microscopy

    OpenAIRE

    Yang, Ding-Shyue; Mohammed, Omar F.; Zewail, Ahmed H.

    2010-01-01

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for whic...

  20. Laser scanning microscopy of broad freezing interfaces with applications to biological cells

    Science.gov (United States)

    Neils, Christopher Martin

    2000-09-01

    A new, vertical cryostage was used for microscopic observation of broad-front freezing in aqueous solutions. This cryostage complements traditional studies of cell behavior and interface morphology in cryobiology. Traditional systems directionally solidify thin samples perpendicular to the optical axis. Thin samples confer thermal and optical advantages for video brightfield microscopy. However, sample thickness can affect the interface morphology. In the new cryostage, ice propagates parallel to the microscope optical axis. The sample cup is 1 cm tall and 1.5 cm in diameter, with insulated sides and a nitrogen-cooled base to freeze the solution upward. The top of the solution is warmed passively through a cover glass or immersion objective. The freezing solutions contain dilute fluorescein dye, which is visible where it is concentrated by exclusion from the ice. The stage is mounted on a confocal laser-scanning microscope, and thermal control and image capture routines are centralized in a LabView user interface. Filtered water, physiological saline, 9.5% glycerol, and 10% glycerol with PBS were frozen at rates between -2°C/min and -10°C/min and sequential images at one plane were captured. Images distinctly revealed a lamellar interface but could not resolve 3-D morphology. The average lamellar spacing was quantified using image analysis. Physiological saline was frozen in flat glass capillary tubes with 0.05 to 0.4 mm path length, mounted vertically to observe internal ice in cross-section. Lamellae were randomly oriented with respect to the glass, suggesting caution when measuring dendrite spacing in a horizontal cryostage. No correlation between capillary size and lamellar spacing was noted. Cell monolayers and synthetic membranes were mounted horizontally to let a well-developed ice front approach the layer broadly. In transparent membranes, ice-membrane interaction was visible until ice grew over and obscured the membrane. The vertical cryostage improved

  1. Three-dimensional imaging of plant cuticle architecture using confocal scanning laser microscopy.

    Science.gov (United States)

    Buda, Gregory J; Isaacson, Tal; Matas, Antonio J; Paolillo, Dominick J; Rose, Jocelyn K C

    2009-10-01

    Full appreciation of the roles of the plant cuticle in numerous aspects of physiology and development requires a comprehensive understanding of its biosynthesis and deposition; however, much is still not known about cuticle structure, trafficking and assembly. To date, assessment of cuticle organization has been dominated by 2D imaging, using histochemical stains in conjunction with light and fluorescence microscopy. This strategy, while providing valuable information, has limitations because it attempts to describe a complex 3D structure in 2D. An imaging technique that could accurately resolve 3D architecture would provide valuable additions to the growing body of information on cuticle molecular biology and biochemistry. We present a novel application of 3D confocal scanning laser microscopy for visualizing the architecture, deposition patterns and micro-structure of plant cuticles, using the fluorescent stain auramine O. We demonstrate the utility of this technique by contrasting the fruit cuticle of wild-type tomato (Solanum lycopersicum cv. M82) with those of cutin-deficient mutants. We also introduce 3D cuticle modeling based on reconstruction of serial optical sections, and describe its use in identification of several previously unreported features of the tomato fruit cuticle.

  2. An endolithic microbial community in dolomite rock in central Switzerland: characterization by reflection spectroscopy, pigment analyses, scanning electron microscopy, and laser scanning microscopy.

    Science.gov (United States)

    Horath, T; Neu, T R; Bachofen, R

    2006-04-01

    A community of endolithic microorganisms dominated by phototrophs was found as a distinct band a few millimeters below the surface of bare exposed dolomite rocks in the Piora Valley in the Alps. Using in situ reflectance spectroscopy, we detected chlorophyll a (Chl a), phycobilins, carotenoids, and an unknown type of bacteriochlorophyll-like pigment absorbing in vivo at about 720 nm. In cross sections, the data indicated a defined distribution of different groups of organisms perpendicular to the rock surface. High-performance liquid chromatography analyses of pigments extracted with organic solvents confirmed the presence of two types of bacteriochlorophylls besides chlorophylls and various carotenoids. Spherical organisms of varying sizes and small filaments were observed in situ with scanning electron microscopy and confocal laser scanning microscopy (one- and two-photon technique). The latter allowed visualization of the distribution of phototrophic microorganisms by the autofluorescence of their pigments within the rock. Coccoid cyanobacteria of various sizes predominated over filamentous ones. Application of fluorescence-labeled lectins demonstrated that most cyanobacteria were embedded in an exopolymeric matrix. Nucleic acid stains revealed a wide distribution of small heterotrophs. Some biological structures emitting a green autofluorescence remain to be identified.

  3. Noninvasive in vivo detection and quantification of Demodex mites by confocal laser scanning microscopy.

    Science.gov (United States)

    Sattler, E C; Maier, T; Hoffmann, V S; Hegyi, J; Ruzicka, T; Berking, C

    2012-11-01

    In many Demodex-associated skin diseases Demodex mites are present in abundance and seem to be at least partially pathogenic. So far all diagnostic approaches such as scraping or standardized superficial skin biopsy are (semi-)invasive and may cause discomfort to the patient. To see whether confocal laser scanning microscopy (CLSM) - a noninvasive method for the visualization of superficial skin layers - is able to detect and quantify D. folliculorum in facial skin of patients with rosacea. Twenty-five patients (34-72 years of age) with facial rosacea and 25 age- and sex-matched normal controls were examined by CLSM. Mosaics of 8 × 8 mm and 5 × 5 mm were created by scanning horizontal layers of lesional skin and quantification of mites per follicle and per area as well as follicles per area was performed. In all patients D. folliculorum could be detected by CLSM and presented as roundish or lengthy cone-shaped structures. CLSM allowed the quantification of Demodex mites and revealed significant differences (P Demodex mites noninvasively in facial skin of patients with rosacea. © 2012 The Authors. BJD © 2012 British Association of Dermatologists.

  4. Enumeration of leukocyte infiltration in solid tumors by confocal laser scanning microscopy

    Directory of Open Access Journals (Sweden)

    Amirkhosravi A

    2006-07-01

    Full Text Available Abstract Background Leukocytes commonly infiltrate solid tumors, and have been implicated in the mechanism of spontaneous regression in some cancers. Conventional techniques for the quantitative estimation of leukocyte infiltrates in tumors rely on light microscopy of immunostained thin tissue sections, in which an arbitrary assessment (based on low, medium or high levels of infiltration of antigen density is made by the pathologist. These estimates are relatively subjective and often require the opinion of a second pathologist. In addition, since thin tissue sections are cut, no data regarding the three-dimensional distribution of antigen can be obtained. Results To overcome these problems, we have designed a method to enumerate leukocyte infiltration into tumors, using confocal laser scanning microscopy of fluorescently immunostained leukocytes in thick tissue sections. Using image analysis software, a threshold was applied to eliminate unstained tissue and residual noise. The total antigen volume in the scanned tissue was calculated and divided by the mean cell volume (calculated by "seeding" ten individual cells to obtain the cell count. Using this method, we compared the calculated leukocyte counts with those obtained manually by ten laboratory personnel. There was no significant difference (P > 0.05 between the cell counts obtained by either method. We then compared leukocyte infiltration into seven tumors and matched non-malignant tissue obtained from the periphery of the resected tissue. There was a significant increase in the infiltration of all leukocyte subsets into the tumors compared to minimal numbers in the non-malignant tissue. Conclusion From these results we conclude that this method may be of considerable use for the enumeration of cells in tissues. Furthermore, since it can be performed by laboratory technical staff, less time input is required by the pathologist in assessing the degree of leukocyte infiltration into tumors.

  5. Comparison of tissue damage caused by various laser systems with tissue tolerable plasma by light and laser scan microscopy

    Science.gov (United States)

    Vandersee, Staffan; Lademann, Jürgen; Richter, Heike; Patzelt, Alexa; Lange-Asschenfeldt, Bernhard

    2013-10-01

    Tissue tolerable plasma (TTP) represents a novel therapeutic method with promising capabilities in the field of dermatological interventions, in particular disinfection but also wound antisepsis and regeneration. The energy transfer by plasma into living tissue is not easily educible, as a variety of features such as the medium’s actual molecule-stream, the ions, electrons and free radicals involved, as well as the emission of ultraviolet, visible and infrared light contribute to its increasingly well characterized effects. Thus, relating possible adversary effects, especially of prolonged exposure to a single component of the plasma’s mode of action, is difficult. Until now, severe adverse events connected to plasma exposure have not been reported when conducted according to existing therapeutic protocols. In this study, we have compared the tissue damage-potential of CO2 and dye lasers with TTP in a porcine model. After exposure of pig ear skin to the three treatment modalities, all specimens were examined histologically and by means of laser scan microscopy (LSM). Light microscopical tissue damage could only be shown in the case of the CO2 laser, whereas dye laser and plasma treatment resulted in no detectable impairment of the specimens. In the case of TTP, LSM examination revealed only an impairment of the uppermost corneal layers of the skin, thus stressing its safety when used in vivo.

  6. Thermal maturity of Tasmanites microfossils from confocal laser scanning fluorescence microscopy

    Science.gov (United States)

    Hackley, Paul C.; Kus, Jolanta

    2015-01-01

    We report here, for the first time, spectral properties of Tasmanites microfossils determined by confocal laser scanning fluorescence microscopy (CLSM, using Ar 458 nm excitation). The Tasmanites occur in a well-characterized natural maturation sequence (Ro 0.48–0.74%) of Devonian shale (n = 3 samples) from the Appalachian Basin. Spectral property λmax shows excellent agreement (r2 = 0.99) with extant spectra from interlaboratory studies which used conventional fluorescence microscopy techniques. This result suggests spectral measurements from CLSM can be used to infer thermal maturity of fluorescent organic materials in geologic samples. Spectra of regions with high fluorescence intensity at fold apices and flanks in individual Tasmanites are blue-shifted relative to less-deformed areas in the same body that have lower fluorescence intensity. This is interpreted to result from decreased quenching moiety concentration at these locations, and indicates caution is needed in the selection of measurement regions in conventional fluorescence microscopy, where it is common practice to select high intensity regions for improved signal intensity and better signal to noise ratios. This study also documents application of CLSM to microstructural characterization of Tasmanites microfossils. Finally, based on an extant empirical relation between conventional λmax values and bitumen reflectance, λmax values from CLSM of Tasmanites microfossils can be used to calculate a bitumen reflectance equivalent value. The results presented herein can be used as a basis to broaden the future application of CLSM in the geological sciences into hydrocarbon prospecting and basin analysis.

  7. Analysis of a marine phototrophic biofilm by confocal laser scanning microscopy using the new image quantification software PHLIP

    NARCIS (Netherlands)

    Müller, L.N.; de Brouwer, J.F.C.; Almeida, J.S.; Stal, L.J.; Xavier, J.B.

    2006-01-01

    Background Confocal laser scanning microscopy (CLSM) is the method of choice to study interfacial biofilms and acquires time-resolved three-dimensional data of the biofilm structure. CLSM can be used in a multi-channel modus where the different channels map individual biofilm components. This

  8. Microradiography and confocal laser scanning microscopy applied to enamel lesions formed in vivo with and without fluoride varnish treatment

    NARCIS (Netherlands)

    Ogaard, B; Duschner, H; Ruben, J; Arends, J

    The aim of the present investigation was to combine 2 techniques suitable for lesion characterization: quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM) on in vivo induced lesions with and without a fluoride varnish (Duraphat(R)) treatment. Orthodontic bands were

  9. Multi-point scanning two-photon excitation microscopy by utilizing a high-peak-power 1042-nm laser.

    Science.gov (United States)

    Otomo, Kohei; Hibi, Terumasa; Murata, Takashi; Watanabe, Hirotaka; Kawakami, Ryosuke; Nakayama, Hiroshi; Hasebe, Mitsuyasu; Nemoto, Tomomi

    2015-01-01

    The temporal resolution of a two-photon excitation laser scanning microscopy (TPLSM) system is limited by the excitation laser beam's scanning speed. To improve the temporal resolution, the TPLSM system is equipped with a spinning-disk confocal scanning unit. However, the insufficient energy of a conventional Ti:sapphire laser source restricts the field of view (FOV) for TPLSM images to a narrow region. Therefore, we introduced a high-peak-power Yb-based laser in order to enlarge the FOV. This system provided three-dimensional imaging of a sufficiently deep and wide region of fixed mouse brain slices, clear four-dimensional imaging of actin dynamics in live mammalian cells and microtubule dynamics during mitosis and cytokinesis in live plant cells.

  10. Studies of the microstructure of polymer-modified bitumen emulsions using confocal laser scanning microscopy.

    Science.gov (United States)

    Forbes, A; Haverkamp, R G; Robertson, T; Bryant, J; Bearsley, S

    2001-12-01

    Polymer-modified bitumen emulsions present a safer and more environmentally friendly binder for enhancing the properties of roads. Cationic bitumen emulsion binders containing polymer latex were investigated using confocal laser scanning microscopy. The latex was incorporated into the bitumen emulsion by using four different addition methods and all emulsions were processed with a conventional colloid mill. The emulsion binder films were studied after evaporation of the emulsion aqueous phase. We show how the microstructure and distribution of the polymer varies within the bitumen binder depending on latex addition method, and that the microstructure of the binder remains intact when exposed to elevated temperature. It was found that a distinctly fine dispersion of polymer results when the polymer is blended into the bitumen before the emulsifying process (a monophase emulsion). In contrast, bi-phase emulsion binders produced by either post-adding the latex to the bitumen emulsion, or by adding the latex into the emulsifier solution phase before processing, or by comilling the latex with the bitumen, water and emulsifier all resulted in a network formation of bitumen particles surrounded by a continuous polymer film. The use of emulsified binders appears to result in a more evenly distributed polymer network compared to the use of hot polymer-modified binders, and they therefore have greater potential for consistent binder cohesion strength, stone retention and therefore improved pavement performance.

  11. Confocal laser-scanning microscopy of capillaries in normal and psoriatic skin

    Science.gov (United States)

    Archid, Rami; Patzelt, Alexa; Lange-Asschenfeldt, Bernhard; Ahmad, Sufian S.; Ulrich, Martina; Stockfleth, Eggert; Philipp, Sandra; Sterry, Wolfram; Lademann, Juergen

    2012-10-01

    An important and most likely active role in the pathogenesis of psoriasis has been attributed to changes in cutaneous blood vessels. The purpose of this study was to use confocal laser-scanning microscopy (CLSM) to investigate dermal capillaries in psoriatic and normal skin. The structures of the capillary loops in 5 healthy participants were compared with those in affected skin of 13 psoriasis patients. The diameters of the capillaries and papillae were measured for each group with CLSM. All investigated psoriasis patients showed elongated, widened, and tortuous microvessels in the papillary dermis, whereas all healthy controls showed a single capillary loop in each dermal papilla. The capillaries of the papillary loop and the dermal papilla were significantly enlarged in the psoriatic skin lesions (diameters 24.39±2.34 and 146.46±28.52 μm, respectively) in comparison to healthy skin (diameters 9.53±1.8 and 69.48±17.16 μm, respectively) (P<0.001). CLSM appears to represent a promising noninvasive technique for evaluating dermal capillaries in patients with psoriasis. The diameter of the vessels could be seen as a well-quantifiable indicator for the state of psoriatic skin. CLSM could be useful for therapeutic monitoring to delay possible recurrences.

  12. The application of dermal papillary rings in dermatology by in vivo confocal laser scanning microscopy

    Science.gov (United States)

    Xiang, W. Z.; Xu, A. E.; Xu, J.; Bi, Z. G.; Shang, Y. B.; Ren, Q. S.

    2010-08-01

    Confocal laser scanning microscopy (CLSM) allows noninvasive visualization of human skin in vivo, without needing to fix or section the tissue. Melanocytes and pigmented keratinocytes at the level of the basal layer form bright dermal papillary rings which are readily amenable to identify in confocal images. Our purpose was to explore the role of dermal papillary rings in assessment of lesion location, the diagnosis, differential diagnosis of lesions and assessment of therapeutic efficacy by in vivo CLSM. Seventy-one patients were imaged with the VivaScope 1500 reflectance confocal microscope provided by Lucid, Inc. The results indicate that dermal papillary rings can assess the location of lesion; the application of dermal papillary rings can provide diagnostic support and differential diagnosis for vitiligo, nevus depigmentosus, tinea versicolor, halo nevus, common nevi, and assess the therapeutic efficacy of NBUVB phototherapy plus topical 0.1 percent tacrolimus ointment for vitiligo. In conclusion, our findings indicate that the dermal papillary rings play an important role in the assessment the location of lesion, diagnosis, differential diagnosis of lesions and assessment of therapeutic efficacy by in vivo CLSM. CLSM may be a promising tool for noninvasive examination in dermatology. However, larger studies are needed to expand the application of dermal papillary rings in dermatology.

  13. Evaluation of Yogurt Microstructure Using Confocal Laser Scanning Microscopy and Image Analysis.

    Science.gov (United States)

    Skytte, Jacob L; Ghita, Ovidiu; Whelan, Paul F; Andersen, Ulf; Møller, Flemming; Dahl, Anders B; Larsen, Rasmus

    2015-06-01

    The microstructure of protein networks in yogurts defines important physical properties of the yogurt and hereby partly its quality. Imaging this protein network using confocal scanning laser microscopy (CSLM) has shown good results, and CSLM has become a standard measuring technique for fermented dairy products. When studying such networks, hundreds of images can be obtained, and here image analysis methods are essential for using the images in statistical analysis. Previously, methods including gray level co-occurrence matrix analysis and fractal analysis have been used with success. However, a range of other image texture characterization methods exists. These methods describe an image by a frequency distribution of predefined image features (denoted textons). Our contribution is an investigation of the choice of image analysis methods by performing a comparative study of 7 major approaches to image texture description. Here, CSLM images from a yogurt fermentation study are investigated, where production factors including fat content, protein content, heat treatment, and incubation temperature are varied. The descriptors are evaluated through nearest neighbor classification, variance analysis, and cluster analysis. Our investigation suggests that the texton-based descriptors provide a fuller description of the images compared to gray-level co-occurrence matrix descriptors and fractal analysis, while still being as applicable and in some cases as easy to tune. © 2015 Institute of Food Technologists®

  14. Starch/carrageenan/milk proteins interactions studied using multiple staining and Confocal Laser Scanning Microscopy.

    Science.gov (United States)

    Matignon, A; Moulin, G; Barey, P; Desprairies, M; Mauduit, S; Sieffermann, J M; Michon, C

    2014-01-01

    This study focused on the effects of the interactions between modified waxy maize starch, kappa carrageenan and skim milk on the microstructure of their mixed systems using Confocal Laser Scanning Microscopy (CLSM). A multiple staining of the components was set up with a view to improving starch covalent staining. In starch/carrageenan pasted mixtures, carrageenan was found to adsorb on and penetrate slightly into the starch granules, whereas no interactions were observed between starch and milk proteins. In ternary mixtures, interactions between starch granules and carrageenan were no longer observed, even when milk proteins were added after starch swelling in the carrageenan solution, thus showing preferential interactions between carrageenan/milk proteins in comparison to carrageenan/starch granules. Modifying the blending order of the components led to microstructure differences depending on several parameters such as starch/carrageenan interactions, carrageenan/milk proteins network structure, level of starch granules disruption and amylopectin contribution to the microstructure. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Application of laser scanning microscopy for the analysis of oral biofilm dissolution by different endodontic irrigants

    Directory of Open Access Journals (Sweden)

    Aldo del Carpio-Perochena

    2014-01-01

    Full Text Available Background: Multi-specie biofilms are highly resistant to antimicrobials due to cellular interactions found in them. The purpose of this study was to evaluate, by confocal laser scanning microscopy, the biofilm dissolution effectiveness of different irrigant solutions on biofilms developed on infected dentin in situ. Materials and Methods: A total of 120 bovine dentin specimens infected intraorally (30/group were treated by the following solutions: 2% of chlorhexidine digluconate, 1%, 2.5% and 5.25% of sodium hypochlorite (NaOCl. The solutions were utilized for 5, 15 and 30 min with 2 experimental volumes 500 μL and 1 mL. All the samples were stained using an acridine orange and the biofilm thickness before (control group and after the experiments were evaluated, utilizing a confocal microscope at ×40. The Mann-Whitney U and the nom-parametric Kruskal-Wallis Dunns tests were utilized to determine the influence of the volume and to perform the comparisons among the groups respectively. The significance level was set at P 0.05. The biofilm dissolution treated with 1% NaOCl was directly proportional to the exposure time (P 0.05. Conclusion: The higher exposure times and concentrations of NaOCl were not sufficient to dissolve 100% of the biofilm. However, all NaOCl solutions were more effective than 2% chlorhexidine digluconate to dissolve organic matter.

  16. Combining confocal laser scanning microscopy with serial section reconstruction in the study of adult neurogenesis.

    Directory of Open Access Journals (Sweden)

    Federico eLuzzati

    2011-05-01

    Full Text Available Current advances in imaging techniques have extended the possibility of visualizing small structures within large volumes of both fixed and live specimens without sectioning. These techniques have contributed valuable information to study neuronal plasticity in the adult brain. However, technical limits still hamper the use of these approaches to investigate neurogenic regions located far from the ventricular surface such as parenchymal neurogenic niches, or the scattered neuroblasts induced by brain lesions. Here, we present a method to combine confocal laser scanning microscopy (CLSM and serial section reconstruction in order to reconstruct large volumes of brain tissue at cellular resolution. In this method a series of thick sections are imaged with CLSM and the resulting stacks of images are registered and 3D reconstructed. This approach is based on existing freeware software and can be performed on ordinary laboratory personal computers (PC. By using this technique we have investigated the morphology and spatial organization of a group of doublecortin (DCX+ neuroblasts located in the lateral striatum of the late post-natal guinea pig. The 3D study unravelled a complex network of long and poorly ramified cell processes, often fascicled and mostly oriented along the internal capsule fibre bundles. These data support CLSM serial section reconstruction as a reliable alternative to the whole mount approaches to analyze cyto-architectural features of adult germinative niches.

  17. Use of biocytin as neuroanatomic tracer in harvested human pancreas: a confocal laser scanning microscopy analysis.

    Science.gov (United States)

    Spiga, Saturnino; Fattore, Liana; Puddu, Maria Cristina; Cappai, Antonello; Picciau, Susanna; Brotzu, Giovanni; Serra, Giuliana Paola; Petruzzo, Palmina

    2002-05-01

    To identify central neuroanatomic structure, biocytin labeling has recently been used. To date, there are no bibliographic references about the use of this molecule in investigations of the peripheral nervous system. In the present study, fresh, harvested human pancreas was used to evidence pancreatic innervations by biocytin. To investigate for the first time pancreatic innervation in harvested pancreas from human multiorgan cadaveric donors. Biocytin labeling was used as a neuroanatomic tracing method, and confocal laser scanning microscopy was used for analysis for description by means of high-resolution images. The application of biocytin-avidin staining in harvested human pancreas revealed numerous bundles of nervous fibers, intrapancreatic ganglia, few small solitary neurons, and a large number of positive supporting cells (glial-like cells). Biocytin appeared to pass through gap junctions between glial elements and neurons and among the neurons. In human pancreas, biocytin is rapidly transported in both anterograde and retrograde directions, with consequent visualization of fine details of pancreatic innervation morphology. Indeed, evidence of anterograde and retrograde transportation of biocytin has been demonstrated in the extensive labeling of pancreatic preganglionic and postganglionic fibers as well as a great number of chemical buds that wind through exocrine tissue or undetermined target cells. To our knowledge, this is the first report of the successful use of biocytin in neuronal retrograde and anterograde labeling in the human peripheral nervous system.

  18. Neutral Red as a Probe for Confocal Laser Scanning Microscopy Studies of Plant Roots

    Science.gov (United States)

    DUBROVSKY, JOSEPH G.; GUTTENBERGER, MARTIN; SARALEGUI, ANDRES; NAPSUCIALY-MENDIVIL, SELENE; VOIGT, BORIS; BALUŠKA, FRANTIŠEK; MENZEL, DIEDRIK

    2006-01-01

    • Background and Aims Neutral red (NR), a lipophilic phenazine dye, has been widely used in various biological systems as a vital stain for bright-field microscopy. In its unprotonated form it penetrates the plasma membrane and tonoplast of viable plant cells, then due to protonation it becomes trapped in acidic compartments. The possible applications of NR for confocal laser scanning microscopy (CLSM) studies were examined in various aspects of plant root biology. • Methods NR was used as a fluorochrome for living roots of Phaseolus vulgaris, Allium cepa, A. porrum and Arabidopsis thaliana (wild-type and transgenic GFP-carrying lines). The tissues were visualized using CLSM. The effect of NR on the integrity of the cytoskeleton and the growth rate of arabidopsis primary roots was analysed to judge potential toxic effects of the dye. • Key Results The main advantages of the use of NR are related to the fact that NR rapidly penetrates root tissues, has affinity to suberin and lignin, and accumulates in the vacuoles. It is shown that NR is a suitable probe for visualization of proto- and metaxylem elements, Casparian bands in the endodermis, and vacuoles in cells of living roots. The actin cytoskeleton and the microtubule system of the cells, as well as the dynamics of root growth, remain unchanged after short-term application of NR, indicating a relatively low toxicity of this chemical. It was also found that NR is a useful probe for the observation of the internal structures of root nodules and of fungal hyphae in vesicular–arbuscular mycorrhizas. • Conclusions Ease, low cost and absence of tissue processing make NR a useful probe for structural, developmental and vacuole-biogenetic studies of plant roots with CLSM. PMID:16520341

  19. Comparison of the external physical damages between laser-assisted and mechanical immobilized human sperm using scanning electronic microscopy.

    Science.gov (United States)

    Chan, David Y L; Li, Tin Chiu

    2017-01-01

    We aim to visualize the external physical damages and distinct external phenotypic effects between mechanical and laser-assisted immobilized human spermatozoa using scanning electronic microscopy (SEM). Human spermatozoa were immobilized mechanically or with laser assistance for SEM examination and the membrane integrities were checked on both types of immobilized spermatozoa. We found evidence of external damages at SEM level on mechanically kinked sperm, but not on laser-assisted immobilized sperm. Although no external damage was found on laser-assist immobilized sperm, there were two distinct types of morphological changes when spermatozoa were stricken by infra-red laser. Coiled tails were immediately formed when Laser pulse was applied to the sperm end piece area, whereas laser applied to the sperm principal piece area resulted in a sharp bend of sperm tails. Sperm immobilized by laser did not exhibit any morphological change if the laser did not hit within the on-screen central target zone or if the laser hit the sperm mid piece or head. Our modified membrane integrity assay revealed that the external membrane of more than half of the laser-assisted immobilized sperm remained intact. In conclusion, mechanical immobilization produced membrane damages whilst laser-assisted immobilization did not result in any external membrane damages besides morphological changes at SEM level.

  20. Light propagation studies on laser modified waveguides using scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Borrise, X.; Berini, Abadal Gabriel; Jimenez, D.

    2001-01-01

    microscope (SNOM) has been used. The laser modifications locally changes the optical properties of the waveguide. The change in the effective refractive index is attributed to a TE to TM mode conversion, Thus, the laser modification might be a new way to fabricate optical mode converters.......By means of direct laser writing on Al, a new method to locally modify optical waveguides is proposed. This technique has been applied to silicon nitride waveguides, allowing modifications of the optical propagation along the guide. To study the formed structures, a scanning near-held optical...

  1. CTC staining and counting of actively respiring bacteria in natural stone using confocal laser scanning microscopy.

    Science.gov (United States)

    Bartosch, S; Mansch, R; Knötzsch, K; Bock, E

    2003-01-01

    A method was established for staining and counting of actively respiring bacteria in natural stone by using the tetrazolium salt 5-cyano-2,3-ditolyltetrazolium chloride (CTC) in combination with confocal laser scanning microscopy (CLSM). Applying 5 mM CTC for 2 h to pure cultures of representative stone-inhabiting microorganisms showed that chemoorganotrophic bacteria and fungi-in contrast to lithoautotrophic nitrifying bacteria-were able to reduce CTC to CTF, the red fluorescing formazan crystals of CTC. Optimal staining conditions for microorganisms in stone material were found to be 15 mM CTC applied for 24 h. The cells could be visualized on transparent and nontransparent mineral materials by means of CLSM. A semi-automated method was used to count the cells within the pore system of the stone. The percentage of CTC-stained bacteria was dependent on temperature and humidity of the material. At 28 degrees C and high humidity (maximum water holding capacity) in the laboratory, about 58% of the total bacterial microflora was active. On natural stone exposed for 9 years at an urban exposure site in Germany, 52-56% of the bacterial microflora was active at the east, west, and north side of the specimen, while only 18% cells were active at the south side. This is consistent with microclimatic differences on the south side which was more exposed to sunshine thus causing UV and water stress as well as higher temperatures on a microscale level. In combination with CLSM, staining by CTC can be used as a fast method for monitoring the metabolic activity of chemoorganotrophic bacteria in monuments, buildings of historic interest or any art objects of natural stone. Due to the small size of samples required, the damage to these objects and buildings can be minimized.

  2. Confocal laser scanning microscopy of liesegang rings in odontogenic cysts: analysis of three-dimensional image reconstruction.

    Science.gov (United States)

    Scivetti, Michele; Lucchese, Alberta; Crincoli, Vito; Pilolli, Giovanni Pietro; Favia, Gianfranco

    2009-01-01

    Liesegang rings are concentric noncellular lamellar structures, occasionally found in inflammatory tissues. They have been confused with various parasites, algas, calcification, and psammoma bodies. The authors examined Liesegang rings from oral inflammatory cysts by both optical and confocal laser scanning microscopy, and perfomed a three-dimensional reconstruction. These investigations indicate that Liesegang rings are composed of multiple birefringent concentric rings, resulting from a progressive deposition of organic substances, with an unclear pathogenesis.

  3. Scanning ultrafast electron microscopy.

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F; Zewail, Ahmed H

    2010-08-24

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.

  4. The neuromuscular system of Pycnophyes kielensis (Kinorhyncha: Allomalorhagida investigated by confocal laser scanning microscopy

    Directory of Open Access Journals (Sweden)

    Andreas Altenburger

    2016-11-01

    Full Text Available Abstract Background Kinorhynchs are ecdysozoan animals with a phylogenetic position close to priapulids and loriciferans. To understand the nature of segmentation within Kinorhyncha and to infer a probable ancestry of segmentation within the last common ancestor of Ecdysozoa, the musculature and the nervous system of the allomalorhagid kinorhynch Pycnophyes kielensis were investigated by use of immunohistochemistry, confocal laser scanning microscopy, and 3D reconstruction software. Results The kinorhynch body plan comprises 11 trunk segments. Trunk musculature consists of paired ventral and dorsal longitudinal muscles in segments 1–10 as well as dorsoventral muscles in segments 1–11. Dorsal and ventral longitudinal muscles insert on apodemes of the cuticle inside the animal within each segment. Strands of longitudinal musculature extend over segment borders in segments 1–6. In segments 7–10, the trunk musculature is confined to the segments. Musculature of the digestive system comprises a strong pharyngeal bulb with attached mouth cone muscles as well as pharyngeal bulb protractors and retractors. The musculature of the digestive system shows no sign of segmentation. Judged by the size of the pharyngeal bulb protractors and retractors, the pharyngeal bulb, as well as the introvert, is moved passively by internal pressure caused by concerted action of the dorsoventral muscles. The nervous system comprises a neuropil ring anterior to the pharyngeal bulb. Associated with the neuropil ring are flask-shaped serotonergic somata extending anteriorly and posteriorly. A ventral nerve cord is connected to the neuropil ring and runs toward the anterior until an attachment point in segment 1, and from there toward the posterior with one ganglion in segment 6. Conclusions Segmentation within Kinorhyncha likely evolved from an unsegmented ancestor. This conclusion is supported by continuous trunk musculature in the anterior segments 1–6, continuous

  5. Real-time mapping of the corneal sub-basal nerve plexus by in vivo laser scanning confocal microscopy

    Science.gov (United States)

    Guthoff, Rudolf F.; Zhivov, Andrey; Stachs, Oliver

    2010-02-01

    The aim of the study was to produce two-dimensional reconstruction maps of the living corneal sub-basal nerve plexus by in vivo laser scanning confocal microscopy in real time. CLSM source data (frame rate 30Hz, 384x384 pixel) were used to create large-scale maps of the scanned area by selecting the Automatic Real Time (ART) composite mode. The mapping algorithm is based on an affine transformation. Microscopy of the sub-basal nerve plexus was performed on normal and LASIK eyes as well as on rabbit eyes. Real-time mapping of the sub-basal nerve plexus was performed in large-scale up to a size of 3.2mm x 3.2mm. The developed method enables a real-time in vivo mapping of the sub-basal nerve plexus which is stringently necessary for statistically firmed conclusions about morphometric plexus alterations.

  6. Evaluation of blood cell attachment on Er: YAG laser applied root surface using scanning electron microscopy.

    Science.gov (United States)

    Cekici, Ali; Maden, Ilay; Yildiz, Sercan; San, Tangul; Isik, Gulden

    2013-01-01

    Periodontal regeneration is dependent on the uninterrupted adhesion, maturation and absorption of fibrin clots to a periodontally compromised root surface. The modification of the root surface with different agents has been used for better fibrin clot formation and blood cell attachment. It is known that Er:YAG laser application on dentin removes the smear layer succesfully. The aim of this study is to observe blood cell attachment and fibrin network formation following ER:YAG laser irradiation on periodontally compromised root surfaces in comparison to chemical root conditioning techniques in vitro. 40 dentin blocks prepared from freshly extracted periodontally compromised hopeless teeth. Specimens were divided in 5 groups; those applied with PBS, EDTA, Citric acid and Er:YAG. They were further divided into two groups: those which had received these applications, and the control group. The specimens were evaluated with scanning electron microscope and micrographs were taken. Smear layer and blood cell attachment scoring was performed. In the Er:YAG laser applied group, smear layer were totally removed. In the blood applied specimens, better fibrin clot formation and blood cell attachment were observed in the Er:YAG group. In the group that had been applied with citric acid, the smear layer was also removed. The smear layer could not be fully removed in the EDTA group. Er:YAG laser application on the root dentin seems to form a suitable surface for fibrin clot formation and blood cell attachment. Further clinical studies to support these results are necessitated.

  7. EPS composition and calcification potential of tufa-dominating cyanobacteria investigated by Scanning Transmission X-ray Microscopy (STXM) and Laser Scanning Microscopy (LSM)

    Science.gov (United States)

    Zippel, Barbara; Dynes, James J.; Obst, Martin; Lawrence, John R.; Neu, Thomas R.

    2010-05-01

    Tufa deposits in freshwater habitats are the result of calcium carbonate precipitation within interfacial microbial ecosystems. Calcite precipitation is influenced by the saturation index and the occurrence of extracellular polymeric substances (EPS) which are produced by a variety of microorganisms. In theory, the first important step of biologically induced calcification processes is the adsorption of calcium ions by extracellular polymeric substances (EPS) produced by cyanobacteria. In the present study we take advantage of Laser Scanning Microscopy (LSM) and combine it with Synchrotron imaging using Scanning Transmission X-ray Microscopy (STXM). STXM represents a technique that allows simultaneous analysis of inorganic and organic constituents as a scale of 50 nm. By means of STXM it is possible to differentiate between calcium carbonate phases at the Ca L-edge. Furthermore, STXM has also been used at the C K-edge to map the major biomolecules (proteins, lipids, and polysaccharides). The purpose of this study is to find out if there are differences in calcium adsorption depending on specific composition of the EPS produced by filamentous cyanobacteria isolated from a German hard water creek (Westerhöfer Bach, Harz Mountains). The goal was to elucidate the potential of biofilms constituents, including microbial cell surfaces as well as extracellular polymeric substances, in triggering the formation of calcium carbonate in tufa systems. For this purpose three filamentous cyanobacteria (Pseudanabaena sp., Leptolyngbya sp. and Nostoc sp.) were cultivated in creek-adapted as well as standard media (BG11) on polycarbonate slides. In situ EPS composition was detected by means of fluorescence lectin-binding approach (FLBA) using 23 commercially available lectins with different specificities for mono- and disaccharides and amino sugars. For CaCO3 nucleation experiments cyanobacterial biofilms grown on polycarbonate slides were deposited in NaHCO3/CaCl2 solutions

  8. Comparison of in vivo and ex vivo laser scanning microscopy and multiphoton tomography application for human and porcine skin imaging

    Energy Technology Data Exchange (ETDEWEB)

    Darvin, M E; Richter, H; Zhu, Y J; Meinke, M C; Knorr, F; Lademann, J [Center of Experimental and Applied Cutaneous Physiology, Department of Dermatology, Venerology and Allergology, Charité - Universitätsmedizin Berlin (Germany); Gonchukov, S A [National Research Nuclear University ' ' MEPhI' ' (Russian Federation); Koenig, K [JenLab GmbH, Schillerstr. 1, 07745 Jena (Germany)

    2014-07-31

    Two state-of-the-art microscopic optical methods, namely, confocal laser scanning microscopy in the fluorescence and reflectance regimes and multiphoton tomography in the autofluorescence and second harmonic generation regimes, are compared for porcine skin ex vivo and healthy human skin in vivo. All skin layers such as stratum corneum (SC), stratum spinosum (SS), stratum basale (SB), papillary dermis (PD) and reticular dermis (RD) as well as transition zones between these skin layers are measured noninvasively at a high resolution, using the above mentioned microscopic methods. In the case of confocal laser scanning microscopy (CLSM), measurements in the fluorescence regime were performed by using a fluorescent dye whose topical application on the surface is well suited for the investigation of superficial SC and characterisation of the skin barrier function. For investigations of deeply located skin layers, such as SS, SB and PD, the fluorescent dye must be injected into the skin, which markedly limits fluorescence measurements using CLSM. In the case of reflection CLSM measurements, the obtained results can be compared to the results of multiphoton tomography (MPT) for all skin layers excluding RD. CLSM cannot distinguish between dermal collagen and elastin measuring their superposition in the RD. By using MPT, it is possible to analyse the collagen and elastin structures separately, which is important for the investigation of anti-aging processes. The resolution of MPT is superior to CLSM. The advantages and limitations of both methods are discussed and the differences and similarities between human and porcine skin are highlighted. (laser biophotonics)

  9. Characterization of atopic skin and the effect of a hyperforin-rich cream by laser scanning microscopy

    Science.gov (United States)

    Meinke, Martina C.; Richter, Heike; Kleemann, Anke; Lademann, Juergen; Tscherch, Kathrin; Rohn, Sascha; Schempp, Christoph M.

    2015-05-01

    Atopic dermatitis (AD) is a multifactorial inflammatory skin disease that affects both children and adults in an increasing manner. The treatment of AD often reduces subjective skin parameters, such as itching, dryness, and tension, but the inflammation cannot be cured. Laser scanning microscopy was used to investigate the skin surface, epidermal, and dermal characteristics of dry and atopic skin before and after treatment with an ointment rich in hyperforin, which is known for its anti-inflammatory effects. The results were compared to subjective parameters and transepidermal water loss, stratum corneum moisture, and stratum corneum lipids. Using biophysical methods, in particular laser scanning microscopy, it was found that atopic skin has distinct features compared to healthy skin. Treatment with a hyperforin-rich ointment resulted in an improvement of the stratum corneum moisture, skin surface dryness, skin lipids, and the subjective skin parameters, indicating that the barrier is stabilized and improved by the ointment. But in contrast to the improved skin surface, the inflammation in the deeper epidermis/dermis often continues to exist. This could be clearly shown by the reflectance confocal microscopy (RCM) measurements. Therefore, RCM measurements could be used to investigate the progress in treatment of atopic dermatitis.

  10. Reduction of the pulse duration of the ultrafast laser pulses of the Two-Photon Laser Scanning Microscopy (2PLSM

    Directory of Open Access Journals (Sweden)

    Reshak Ali

    2008-07-01

    Full Text Available Abstract Background We provide an update of our two-photon laser scanning microscope by compressing or reducing the broadening of the pulse width of ultrafast laser pulses for dispersion precompensation, to enable the pulses to penetrate deeply inside the sample. Findings The broadening comes as the pulses pass through the optical elements. We enhanced and modified the quality and the sharpness of images by enhancing the resolution using special polarizer namely Glan Laser polarizer GL10. This polarizer consists of two prisms separated by air space. This air separation between the two prisms uses to delay the red wavelength when the light leaves the first prism to the air then to second prism. We note a considerable enhancing with using the GL polarizer, and we can see the details of the leaf structure in early stages when we trying to get focus through z-stacks of images in comparison to exactly the same measurements without using GL polarizer. Hence, with this modification we able to reduce the time of exposure the sample to the laser radiation thereby we will reduce the probability of photobleaching and phototoxicity. When the pulse width reduced, the average power of the laser pulses maintained at a constant level. Significant enhancement is found between the two kinds of images of the Two-Photon Excitation Fluorescence (TPEF. Conclusion In summary reduction the laser pulse width allowed to collect more diffraction orders which will used to form the images. The more diffraction orders the higher resolution images.

  11. Comparison of in vivo and ex vivo laser scanning microscopy and multiphoton tomography application for human and porcine skin imaging

    Science.gov (United States)

    Darvin, M. E.; Richter, H.; Zhu, Y. J.; Meinke, M. C.; Knorr, F.; Gonchukov, S. A.; Koenig, K.; Lademann, J.

    2014-07-01

    Two state-of-the-art microscopic optical methods, namely, confocal laser scanning microscopy in the fluorescence and reflectance regimes and multiphoton tomography in the autofluorescence and second harmonic generation regimes, are compared for porcine skin ex vivo and healthy human skin in vivo. All skin layers such as stratum corneum (SC), stratum spinosum (SS), stratum basale (SB), papillary dermis (PD) and reticular dermis (RD) as well as transition zones between these skin layers are measured noninvasively at a high resolution, using the above mentioned microscopic methods. In the case of confocal laser scanning microscopy (CLSM), measurements in the fluorescence regime were performed by using a fluorescent dye whose topical application on the surface is well suited for the investigation of superficial SC and characterisation of the skin barrier function. For investigations of deeply located skin layers, such as SS, SB and PD, the fluorescent dye must be injected into the skin, which markedly limits fluorescence measurements using CLSM. In the case of reflection CLSM measurements, the obtained results can be compared to the results of multiphoton tomography (MPT) for all skin layers excluding RD. CLSM cannot distinguish between dermal collagen and elastin measuring their superposition in the RD. By using MPT, it is possible to analyse the collagen and elastin structures separately, which is important for the investigation of anti-aging processes. The resolution of MPT is superior to CLSM. The advantages and limitations of both methods are discussed and the differences and similarities between human and porcine skin are highlighted.

  12. Data on characterization of nano- and micro-structures resulting from glycine betaine surfactant/kappa-carrageenan interactions by Laser Scanning Confocal Microscopy and Transmission Electron Microscopy.

    Science.gov (United States)

    Gaillard, Cédric; Wang, Yunhui; Covis, Rudy; Vives, Thomas; Benoit, Maud; Benvegnu, Thierry

    2016-12-01

    This article contains data on the Laser Scanning Confocal Microscopy (LSCM) and Transmission Electron Microscopy (TEM) images related to multi-scaled self-assemblies resulting from 'green' cationic glycine betaine surfactant/anionic kappa-carrageenan interactions. These data gave clear evidence of the evolution of the micron-, nano-sized structures obtained at two surfactant/polymer molar ratios (3.5 and 0.8) and after the dilution of the aqueous dispersions with factors of 5 and 10 times. This data article is related to the research article entitled, "Monitoring the architecture of anionic ĸ-carrageenan/cationic glycine betaine amide surfactant assemblies by dilution: A multiscale approach" (Gaillard et al., 2017) [1].

  13. Determination of the thickness and structure of the skin barrier by in vivo laser scanning microscopy

    Science.gov (United States)

    Lademann, J.; Richter, H.; Astner, S.; Patzelt, A.; Knorr, F.; Sterry, W.; Antoniou, Ch

    2008-04-01

    Normal skin barrier function is an essential aspect of skin homeostasis and regeneration. Dynamic inflammatory, proliferative and neoplastic skin processes such as wound healing, psoriasis and contact dermatitis are associated with a significant disruption of the skin barrier. In recent years, there has been increasing interest in evaluating cosmetic and pharmacologic products for their ability to restore these protective properties. The gold standard for characterization of barrier function has been the measurement of the transepidermal water loss, however the disadvantage of this method is its interference with several endogenous and exogenous factors such as hydration, perspiration and topically applied substances. This study was aimed to test the clinical applicability of a fluorescence confocal laser scanning microscope (LSM) for a systematic morphologic analysis of the structure, integrity and thickness of the stratum corneum in 10 otherwise healthy volunteers. The influence of skin treatment with commercial moisturizing cream on skin barrier function was evaluated in serial non-invasive examinations. Our findings showed that in vivo LSM may represent a simple and efficient method for the characterization of skin barrier properties, such as the thickness and hydration of the stratum corneum.

  14. Prognostic significance of vascularity in cutaneous melanoma: pilot study using in vivo confocal scanning laser microscopy.

    Science.gov (United States)

    Humphrey, Shannon; Walsh, Noreen M; Delaney, Laura; Propperova, Iva; Langley, Richard G B

    2006-01-01

    Tumor vascularity may be of strong prognostic significance in cutaneous melanoma. We are the first to use a novel, noninvasive, in vivo confocal scanning laser microscope (CSLM) to evaluate vascularity in cutaneous melanoma. Our purpose was to apply a CSLM to assess vascularity in melanoma and to evaluate the prognostic significance of these findings. Patients with a suspicious pigmented lesion were prospectively recruited to undergo CSLM prior to skin biopsy, and those diagnosed with melanoma were included in this study. A blinded observer graded tumor vascularity from still digital CSLM images. The CSLM vascularity grading was correlated to tumor thickness and ulceration as a proxy for clinical prognosis. Sixty-six patients and 67 lesions underwent imaging with CSLM. Eleven patients were diagnosed with melanoma, including six in situ and five invasive melanomas. Prominent vascularity was observed in all advanced melanomas. There was an overall increase in mean tumor thickness between the absent (x = 0.315 mm) to prominent (x = 1.51 mm) categories. In this pilot study, vascularity was readily detected in cutaneous melanomas using CSLM. Prominent vascularity was observed in patients with advanced cutaneous melanomas. Our preliminary results are encouraging and indicate potential for the use of CSLM to assess vascularity in cutaneous melanoma, with potential prognostic and therapeutic implications.

  15. Laser Scanning Fluorescence Microscope

    Science.gov (United States)

    Hansen, Eric W.; Zelten, J. Peter; Wiseman, Benjamin A.

    1988-06-01

    We report on the development of a laser scanning fluorescence microscope possessing several features which facilitate its application to biological and biophysical analyses in living cells. It is built around a standard inverted microscope stand, enabling the use of standard optics, micromanipulation apparatus, and conventional (including video) microscopy in conjunction with laser scanning. The beam is scanned across the specimen by a pair of galvanometer-mounted mirrors, driven by a programmable controller which can operate in three modes: full raster scan, region of interest, and random-access. A full 512x512 pixel image can be acquired in one second. In region of interest mode, several subareas of the field can be selected for more rapid or detailed analysis. For those cases where the time scale of the observed phenomenon precludes full-field imaging, or where a full-field image is unnecessary, the random access mode enables an arbitrary pattern of isolated points to be selected and rapidly sequenced through. Via a graphical user interface implemented on the system's host computer, a user will be able to take a scout image either with video or a full-field laser scan, select regions or points on the scout image with a mouse, and set up experimental parameters such as detector integration times with a window-style menu. The instrument is designed to be a flexible testbed for investigating new techniques, without compromising its utility as a tool for biological research.

  16. Noise analysis of a white-light supercontinuum light source for multiple wavelength confocal laser scanning fluorescence microscopy

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, Gail [Centre for Biophotonics, Strathclyde Institute for Biomedical Sciences, University of Strathclyde, 27 Taylor Street, Glasgow, G4 0NR (United Kingdom)

    2005-08-07

    Intensity correlations of a Ti : sapphire, Kr/Ar and a white-light supercontinuum were performed to quantify the typical signal amplitude fluctuations and hence ascertain the comparative output stability of the white-light supercontinuum source for confocal laser scanning microscopy (CLSM). Intensity correlations across a two-pixel sample (n = 1000) of up to 98%, 95% and 94% were measured for the Ti : sapphire, Kr/Ar and white-light supercontinuum source, respectively. The white-light supercontinuum noise level is therefore acceptable for CLSM, with the added advantage of wider wavelength flexibility over traditional CLSM excitation sources. The relatively low-noise white-light supercontinuum was then used to perform multiple wavelength sequential CLSM of guinea pig detrusor to confirm the reliability of the system and to demonstrate system flexibility.

  17. Characterization by Confocal Laser Scanning Microscopy of the Phase Composition at Interfaces in Thick Films of Polymer Blends

    Directory of Open Access Journals (Sweden)

    Sandro Lattante

    2014-01-01

    Full Text Available Confocal Laser Scanning Microscopy (CLSM has been used as a fast, user-friendly, and noninvasive tool for characterizing the phase composition differences at the substrate and air interfaces in thick films of polymer blends. A clearly different phase composition at the blend/glass interface and at the blend/air interface has been detected. We show that PCBM preferentially accumulates at the glass/blend interface, while P3HT preferentially accumulates at the blend/air interface, by comparing the integrated signal intensity of the luminescence coming from both interfaces. Our results demonstrate that CLSM can be used conveniently for the fast identification of a preferential phase segregation at interfaces in polymer blends. This is useful in the research field on devices (like sensors or planar waveguides that are based on very thick layers (thickness higher than 1 μm.

  18. Analysis of the penetration of a caffeine containing shampoo into the hair follicles by in vivo laser scanning microscopy

    Science.gov (United States)

    Lademann, J.; Richter, H.; Schanzer, S.; Klenk, A.; Sterry, W.; Patzelt, A.

    2010-02-01

    In previous in vitro investigations, it was demonstrated that caffeine is able to stimulate the hair growth. Therefore, a penetration of caffeine into the hair follicle is necessary. In the present study, in vivo laser scanning microscopy (LSM) was used to investigate the penetration and storage of a caffeine containing shampoo into the hair follicles. It was shown that a 2-min contact time of the shampoo with the skin was enough to accumulate significant parts of the shampoo in the hair follicles. A penetration of the shampoo up to a depth of approx. 200 μm could be detected, which represents the detection limit of the LSM. At this depth, the close network of the blood capillaries surrounding the hair follicles commences. Even after 24 h, the substance was still detectable in the hair follicles. This demonstrates the long-term reservoir function of the hair follicles for topically applied substances such as caffeine.

  19. Lasers for nonlinear microscopy.

    Science.gov (United States)

    Wise, Frank

    2013-03-01

    Various versions of nonlinear microscopy are revolutionizing the life sciences, almost all of which are made possible because of the development of ultrafast lasers. In this article, the main properties and technical features of short-pulse lasers used in nonlinear microscopy are summarized. Recent research results on fiber lasers that will impact future instruments are also discussed.

  20. Confocal scanning microscopy

    DEFF Research Database (Denmark)

    Bariani, Paolo

    This report is based on a metrological investigation on confocal microscopy technique carried out by Uffe Rolf Arlø Theilade and Paolo Bariani. The purpose of the experimental activity was twofold a metrological instrument characterization and application to assessment of rough PP injection moulded...... replicated topography. Confocal microscopy is seen to be a promising technique in metrology of microstructures. Some limitations with respect to surface metrology were found during the experiments. The experiments were carried out using a Zeiss LSM 5 Pascal microscope owned by the Danish Polymer Centre...

  1. A new approach for the spatially resolved qualitative analysis of the protein distribution in hydrogel beads based on confocal laser scanning microscopy

    NARCIS (Netherlands)

    Heinemann, Matthias; Wagner, Thomas; Doumèche, Bastien; Ansorge-Schumacher, Marion; Büchs, Jochen

    2002-01-01

    To investigate the spatial distribution of white egg albumin (WEA) in alginate beads, a new method based on confocal laser scanning microscopy (CLSM) was developed. In contrast to the existing CLSM methods, misleading conclusions are prevented with the application of the new method which does not

  2.   In situ identification of streptococci and other bacteria in initial dental biofilm by confocal laser scanning microscopy and fluorescence in situ hybridization

    DEFF Research Database (Denmark)

    Dige, Irene; Kilian, Mogens; Nilsson, Holger

    2007-01-01

    Confocal laser scanning microscopy (CLSM) has been employed as a method for studying intact natural biofilm. When combined with fluorescence in situ hybridization (FISH) it is possible to analyze spatial relationships and changes of specific members of microbial populations over time. The aim...

  3. Direct In Situ Viability Assessment of Bacteria in Probiotic Dairy Products Using Viability Staining in Conjunction with Confocal Scanning Laser Microscopy

    Science.gov (United States)

    Auty, M. A. E.; Gardiner, G. E.; McBrearty, S. J.; O'Sullivan, E. O.; Mulvihill, D. M.; Collins, J. K.; Fitzgerald, G. F.; Stanton, C.; Ross, R. P.

    2001-01-01

    The viability of the human probiotic strains Lactobacillus paracasei NFBC 338 and Bifidobacterium sp. strain UCC 35612 in reconstituted skim milk was assessed by confocal scanning laser microscopy using the LIVE/DEAD BacLight viability stain. The technique was rapid (diluent. PMID:11133474

  4. Laser-scanning velocimetry: A confocal microscopy method for quantitative measurement of cardiovascular performance in zebrafish embryos and larvae

    Directory of Open Access Journals (Sweden)

    Linney Elwood

    2007-07-01

    Full Text Available Abstract Background The zebrafish Danio rerio is an important model system for drug discovery and to study cardiovascular development. Using a laser-scanning confocal microscope, we have developed a non-invasive method of measuring cardiac performance in zebrafish embryos and larvae that obtains cardiovascular parameters similar to those obtained using Doppler echocardiography in mammals. A laser scan line placed parallel to the path of blood in the dorsal aorta measures blood cell velocity, from which cardiac output and indices of vascular resistance and contractility are calculated. Results This technique, called laser-scanning velocimetry, was used to quantify the effects of pharmacological, developmental, and genetic modifiers of cardiac function. Laser-scanning velocimetry was applied to analyze the cardiovascular effects of morpholino knockdown of osmosensing scaffold for MEKK3 (OSM, which when mutated causes the human vascular disease cerebral cavernous malformations. OSM-deficient embryos had a constricted aortic arch and markedly increased peak cell velocity, a characteristic indicator of aortic stenosis. Conclusion These data validate laser-scanning velocimetry as a quantitative tool to measure cardiovascular performance for pharmacological and genetic analysis in zebrafish, which requires no specialized equipment other than a laser-scanning confocal microscope.

  5. Scanning Tunneling Microscopy

    Science.gov (United States)

    1992-03-17

    the study of surfact strain. A variety of studies were conducted on Au(in air) CdTe (in air), Hg1-xMnxTe (under glycerin), and Hg 1-xCdx Te (in air...HgCdTe and CdMnTe. (7) Scribing of adjacent parallel lines on the HgCdTe and CdMnTe surfaces. (8) Identification of a new c(4x6) reconstruction on some...tihodoluminescence spectroscopy, coupled with pulsed laser annealing-to reveal systematics between interface chemical and electronic structure. The

  6. An essential role for dendritic cells in vernal keratoconjunctivitis: analysis by laser scanning confocal microscopy.

    Science.gov (United States)

    Liu, M; Gao, H; Wang, T; Wang, S; Li, S; Shi, W

    2014-03-01

    CD4+ T helper type 2 cells play a central role in the pathogenesis of vernal keratoconjunctivitis (VKC), and antigen-presenting cells are required for the cell activation. In this study, we aimed to survey the density, distribution, and morphology of dendritic cells (DCs) in patients with VKC by in vivo confocal microscopy. Thirty-five patients (mean, 12.4 ± 5.3 years) affected by VKC were included. All patients were treated with 0.1% fluorometholone eye drops and 0.5% cyclosporine A eye drops. The density and morphological and distributional characteristics of DCs in each right eye were evaluated by in vivo confocal microscopy before treatment and at 1, 3, and 6 months after treatment. Thirty-five age-matched normal subjects (mean, 16.5 ± 1.8 years) were studied as controls. There was significant difference in age between the VKC group and the control group (F = 18.17, P < 0.05). Compared with normal eyes, increased numbers of DCs were found in patients with VKC, with mean cell densities of 244.09 ± 59.76 cells/mm(2) at the bulbar conjunctiva, 574.53 ± 87.34 cells/mm(2) at the limbus, and 403.32 ± 106.59 cells/mm(2) at the peripheral cornea before treatment. These DCs exhibited a typical dendritic shape. At 3 months after treatment, the DC density at the conjunctiva decreased significantly (P < 0.05), approximating that in the controls. At 3 and 6 months, the DC densities at the limbus and peripheral cornea also decreased significantly (P < 0.05), but were still statistically higher than those in the controls. These DCs, with small dendritic processes or irregular shapes, were observed to gradually locate at the epithelial basal membrane and subbasal nerve plexus. In vivo confocal microscopy appears to be a valuable tool in evaluating the dynamic change of DCs at the conjunctiva and cornea. DCs play an essential role in VKC and therefore may constitute a target for therapeutic intervention for VKC. © 2013 John Wiley & Sons Ltd.

  7. A novel method to analyse in vivo the physiological state and cell viability of phototrophic microorganisms by confocal laser scanning microscopy using a dual laser.

    Science.gov (United States)

    Millach, Laia; Obiol, Aleix; Solé, Antonio; Esteve, Isabel

    2017-10-01

    Phototrophic microorganisms are very abundant in extreme environments, where are subjected to frequent and strong changes in environmental parameters. Nevertheless, little is known about the physiological effects of these changing environmental conditions on viability of these microorganisms, which are difficult to grow in solid media and have the tendency to form aggregates. For that reason, it is essential to develop methodologies that provide data in short time consuming, in vivo and with minimal manipulating the samples, in response to distinct stress conditions. In this paper, we present a novel method using Confocal Laser Scanning Microscopy and a Dual Laser (CLSM-DL) for determining the cell viability of phototrophic microorganisms without the need of either staining or additional use of image treating software. In order to differentiate viable and nonviable Scenedesmus sp. DE2009 cells, a sequential scan in two different channels was carried out from each same xyz optical section. On the one hand, photosynthetic pigments fluorescence signal (living cells) was recorded at the red channel (625- to 785-nm fluorescence emission) exciting the samples with a 561-nm laser diode, and an acousto-optic tunable filter (AOTF) of 20%. On the other hand, nonphotosynthetic autofluorescence signal (dead cells) was recorded at the green channel (500- to 585-nm fluorescence emission) using a 405-nm UV laser, an AOTF of 15%. Both types of fluorescence signatures were captured with a hybrid detector. The validation of the CLSM-DL method was performed with SYTOX green fluorochrome and electron microscopic techniques, and it was also applied for studying the response of distinct light intensities, salinity doses and exposure times on a consortium of Scenedesmus sp. DE2009. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

  8. Aerogel Track Morphology: Measurement, Three Dimensional Reconstruction and Particle Location using Confocal Laser Scanning Microscopy

    Science.gov (United States)

    Kearsley, A. T.; Ball, A. D.; Wozniakiewicz, P. A.; Graham, G. A.; Burchell, M. J.; Cole, M. J.; Horz, F.; See, T. H.

    2007-01-01

    The Stardust spacecraft returned the first undoubted samples of cometary dust, with many grains embedded in the silica aerogel collector . Although many tracks contain one or more large terminal particles of a wide range of mineral compositions , there is also abundant material along the track walls. To help interpret the full particle size, structure and mass, both experimental simulation of impact by shots and numerical modeling of the impact process have been attempted. However, all approaches require accurate and precise measurement of impact track size parameters such as length, width and volume of specific portions. To make such measurements is not easy, especially if extensive aerogel fracturing and discoloration has occurred. In this paper we describe the application and limitations of laser confocal imagery for determination of aerogel track parameters, and for the location of particle remains.

  9. CdSe/CdS-quantum rods: fluorescent probes for in vivo two-photon laser scanning microscopy

    Science.gov (United States)

    Dimitrijevic, Jelena; Krapf, Lisa; Wolter, Christopher; Schmidtke, Christian; Merkl, Jan-Philip; Jochum, Tobias; Kornowski, Andreas; Schüth, Anna; Gebert, Andreas; Hüttmann, Gereon; Vossmeyer, Tobias; Weller, Horst

    2014-08-01

    CdSe/CdS-Quantum-dots-quantum-rods (QDQRs) with an aspect ratio of ~6 are prepared via the seeded growth method, encapsulated within a shell of crosslinked poly(isoprene)-block-poly(ethylene glycol) (PI-b-PEG) diblock copolymer, and transferred from the organic phase into aqueous media. Their photoluminescence quantum yield (PLQY) of 78% is not compromised by the phase transfer. Within a period of two months the PLQY of QDQRs in aqueous solution at neutral pH decreases only slightly (to ~65%). The two-photon (TP) action cross sections of QDQRs (~105 GM) are two orders of magnitude higher than those of CdSe/CdS/ZnS-core/shell/shell quantum dots (QDs, ~103 GM) with comparable diameter (~5 nm). After applying PI-b-PEG encapsulated QDQRs onto the small intestinal mucosa of mice in vivo, their strong red fluorescence can easily be observed by two-photon laser scanning microscopy (TPLSM) and clearly distinguished from autofluorescent background. Our results demonstrate that PI-b-PEG encapsulated CdSe/CdS-QDQRs are excellent probes for studying the uptake and fate of nanoparticles by two-photon imaging techniques in vivo.CdSe/CdS-Quantum-dots-quantum-rods (QDQRs) with an aspect ratio of ~6 are prepared via the seeded growth method, encapsulated within a shell of crosslinked poly(isoprene)-block-poly(ethylene glycol) (PI-b-PEG) diblock copolymer, and transferred from the organic phase into aqueous media. Their photoluminescence quantum yield (PLQY) of 78% is not compromised by the phase transfer. Within a period of two months the PLQY of QDQRs in aqueous solution at neutral pH decreases only slightly (to ~65%). The two-photon (TP) action cross sections of QDQRs (~105 GM) are two orders of magnitude higher than those of CdSe/CdS/ZnS-core/shell/shell quantum dots (QDs, ~103 GM) with comparable diameter (~5 nm). After applying PI-b-PEG encapsulated QDQRs onto the small intestinal mucosa of mice in vivo, their strong red fluorescence can easily be observed by two-photon laser

  10. Scanning quantum decoherence microscopy.

    Science.gov (United States)

    Cole, Jared H; Hollenberg, Lloyd C L

    2009-12-09

    The use of qubits as sensitive nanoscale magnetometers has been studied theoretically and recently demonstrated experimentally. In this paper we propose a new concept, in which a scanning two-state quantum system is used to probe a sample through the subtle effects of decoherence. Mapping both the Hamiltonian and decoherence properties of a qubit simultaneously provides a unique image of the magnetic (or electric) field properties at the nanoscale. The resulting images are sensitive to the temporal as well as spatial variation in the fields created by the sample. As examples we theoretically study two applications; one from condensed matter physics, the other biophysics. The individual components required to realize the simplest version of this device (characterization and measurement of qubits, nanoscale positioning) have already been demonstrated experimentally.

  11. Cutting efficiency of apical preparation using ultrasonic tips with microprojections: confocal laser scanning microscopy study

    Directory of Open Access Journals (Sweden)

    Sang-Won Kwak

    2014-11-01

    Full Text Available Objectives The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods The apical 3-mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan or JT-5B (B&L Biotech Ltd.. The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1, J1 (JT-5B / Power-1, K4 (KIS-1D / Power-4, and J4 (JT-5B / Power-4. The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05. The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

  12. Effects of a topically applied wound ointment on epidermal wound healing studied by in vivo fluorescence laser scanning microscopy analysis

    Science.gov (United States)

    Lange-Asschenfeldt, Bernhard; Alborova, Alena; Krüger-Corcoran, Daniela; Patzelt, Alexa; Richter, Heike; Sterry, Wolfram; Kramer, Axel; Stockfleth, Eggert; Lademann, Jürgen

    2009-09-01

    Epidermal wound healing is a complex and dynamic regenerative process necessary to reestablish skin integrity. Fluorescence confocal laser scanning microscopy (FLSM) is a noninvasive imaging technique that has previously been used for evaluation of inflammatory and neoplastic skin disorders in vivo and at high resolution. We employed FLSM to investigate the evolution of epidermal wound healing noninvasively over time and in vivo. Two suction blisters were induced on the volar forearms of the study participants, followed by removal of the epidermis. To study the impact of wound ointment on the process of reepithelization, test sites were divided into two groups, of which one test site was left untreated as a negative control. FLSM was used for serial/consecutive evaluations up to 8 days. FLSM was able to visualize the development of thin keratinocyte layers developing near the wound edge and around hair follicles until the entire epidermis has been reestablished. Wounds treated with the wound ointment were found to heal significantly faster than untreated wounds. This technique allows monitoring of the kinetics of wound healing noninvasively and over time, while offering new insights into the potential effects of topically applied drugs on the process of tissue repair.

  13. Porosity of natural stone and use of confocal laser scanning microscopy on calcitic marble aged in laboratory

    Directory of Open Access Journals (Sweden)

    Ana Mladenovič

    2008-06-01

    Full Text Available Porosity is one of the key characteristics of natural stone, which influences ondurability as well as functionality of stone as building material. Further, deterioration processes themselves are also characterized by change of porosity. Different direct and indirect techniques can be used for porosity determination. In the following paper overview of these methods, as well as their advantages and disadvantages, is given. Confocal laser scanning microscopy (CLSM is indirect (microscopic technique. Despite its numerous advantages, among which 3D visualizationof pore structure is of major importance, this technique is less known in the area of building materials. An example how CLSM can be applied for qualitative and quantitative evaluation of porosity of calcitic polygonal granoblastic marble is given in this paper. Studied marble has been, despite of its poor durability, often used as building material, especially in the case of claddings. It is shown that thermal hydric factors of deterioration can influence porosity significantly,especially formation of intergranular cracks.This kind of deterioration can be successfully evaluated with use of CLSM method, if samples are suitable prepared and if suitable image analysis tools are developed.

  14. Detection of macrophage activity in atherosclerosis in vivo using multichannel, high-resolution laser scanning fluorescence microscopy

    Science.gov (United States)

    Pande, Ashvin N.; Kohler, Rainer; Aikawa, Elena; Weissleder, Ralph; Jaffer, Farouc

    2006-03-01

    Molecular and cellular mechanisms of atherogenesis and its treatment are largely being unraveled by in vitro techniques. We describe methodology to directly image macrophage cell activity in vivo in a murine model of atherosclerosis using laser scanning fluorescence microscopy (LSFM) and a macrophage-targeted, near-infrared fluorescent (NIRF) magnetofluorescent nanoparticle (MFNP). Atherosclerotic apolipoprotein E deficient (apoE -/-) mice (n=10) are injected with MFNP or 0.9% saline, and wild-type mice (n=4) are injected with MFNP as additional controls. After 24 h, common carotid arteries are surgically exposed and prepared for LSFM. Multichannel LSFM of MFNP-enhanced carotid atheroma (5×5-µm in-plane resolution) shows a strong focal NIRF signal, with a plaque target-to-background ratio of 3.9+/-1.8. Minimal NIRF signal is observed in control mice. Spectrally resolved indocyanine green (ICG) fluorescence angiograms confirm the intravascular location of atheroma. On ex vivo fluorescence reflectance imaging, greater NIRF plaque signal is seen in apoE -/- MFNP mice compared to controls (p<0.01). The NIRF signal correlates well with immunostained macrophages, both by stained surface area (r=0.77) and macrophage number (r=0.86). The validated experimental methodology thus establishes a platform for investigating macrophage activity in atherosclerosis in vivo, and has implications for the detection of clinical vulnerable plaques.

  15. Study of Polymer Material Aging by Laser Mass Spectrometry, UV-Visible Spectroscopy, and Environmental Scanning Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Junien Exposito

    2007-01-01

    Full Text Available Dyed natural rubber (NR and styrene butadiene rubber (SBR, designed for outdoor applications, were exposed to an accelerated artificial aging in xenon light. The aging results in the deterioration of the exposed surface material properties. The ability of dyed polymers to withstand prolonged sunlight exposure without fading or undergoing any physical deterioration is largely determined not only by the photochemical characteristics of the absorbing dyestuff itself but also by the polymer structure and fillers. Results obtained by laser mass spectrometry, UV-visible spectroscopy, and environmental scanning electron microscopy indicate that dyed filled NR and SBR samples behave differently during the photo-oxidation. The fading of the dyed polymers was found to be promoted in the NR sample. This can be correlated with LDI-FTICRMS results, which show the absence of [M-H]− orange pigment pseudomolecular ion and also its fragment ions after aging. This is confirmed by both EDX and UV/Vis spectroscopy. EDX analysis indicates a concentration of chlorine atoms, which can be considered as a marker of orange pigment or its degradation products, only at the surface of SBR flooring after aging. Reactivity of radicals formed during flooring aging has been studied and seems to greatly affect the behavior of such organic pigments.

  16. In vivo high-resolution structural imaging of large arteries in small rodents using two-photon laser scanning microscopy

    Science.gov (United States)

    Megens, Remco T. A.; Reitsma, Sietze; Prinzen, Lenneke; Oude Egbrink, Mirjam G. A.; Engels, Wim; Leenders, Peter J. A.; Brunenberg, Ellen J. L.; Reesink, Koen D.; Janssen, Ben J. A.; Ter Haar Romeny, Bart M.; Slaaf, Dick W.; van Zandvoort, Marc A. M. J.

    2010-01-01

    In vivo (molecular) imaging of the vessel wall of large arteries at subcellular resolution is crucial for unraveling vascular pathophysiology. We previously showed the applicability of two-photon laser scanning microscopy (TPLSM) in mounted arteries ex vivo. However, in vivo TPLSM has thus far suffered from in-frame and between-frame motion artifacts due to arterial movement with cardiac and respiratory activity. Now, motion artifacts are suppressed by accelerated image acquisition triggered on cardiac and respiratory activity. In vivo TPLSM is performed on rat renal and mouse carotid arteries, both surgically exposed and labeled fluorescently (cell nuclei, elastin, and collagen). The use of short acquisition times consistently limit in-frame motion artifacts. Additionally, triggered imaging reduces between-frame artifacts. Indeed, structures in the vessel wall (cell nuclei, elastic laminae) can be imaged at subcellular resolution. In mechanically damaged carotid arteries, even the subendothelial collagen sheet (~1 μm) is visualized using collagen-targeted quantum dots. We demonstrate stable in vivo imaging of large arteries at subcellular resolution using TPLSM triggered on cardiac and respiratory cycles. This creates great opportunities for studying (diseased) arteries in vivo or immediate validation of in vivo molecular imaging techniques such as magnetic resonance imaging (MRI), ultrasound, and positron emission tomography (PET).

  17. Evaluation of transdermal delivery of nanoemulsions in ex vivo porcine skin using two-photon microscopy and confocal laser-scanning microscopy

    Science.gov (United States)

    Choi, Sanghoon; Kim, Jin Woong; Lee, Yong Joong; Delmas, Thomas; Kim, Changhwan; Park, Soyeun; Lee, Ho

    2014-10-01

    This study experimentally evaluates the self-targeting ability of asiaticoside-loaded nanoemulsions compared with nontargeted nanoemulsions in ex vivo experiments with porcine skin samples. Homebuilt two-photon and confocal laser-scanning microscopes were employed to noninvasively examine the transdermal delivery of two distinct nanoemulsions. Prior to the application of nanoemulsions, we noninvasively observed the morphology of porcine skin using two-photon microscopy. We have successfully visualized the distributions of the targeted and nontargeted nanoemulsions absorbed into the porcine skin samples. Asiaticoside-loaded nanoemulsions showed an improved ex vivo transdermal delivery through the stratum corneum compared with nonloaded nanoemulsions. As a secondary measure, nanoemulsions-applied samples were sliced in the depth direction with a surgical knife in order to obtain the complete depth-direction distribution profile of Nile red fluorescence. XZ images demonstrated that asiaticoside-loaded nanoemulsion penetrated deeper into the skin compared with nontargeted nanoemulsions. The basal layer boundary is clearly visible in the case of the asiaticoside-loaded skin sample. These results reaffirm the feasibility of using self-targeting ligands to improve permeation through the skin barrier for cosmetics and topical drug applications.

  18. Can scanning near-field optical microscopy be compared with confocal laser scanning microscopy? A preliminary study on alpha-sarcoglycan and beta1D-integrin in human skeletal muscle.

    Science.gov (United States)

    Anastasi, G; Cutroneo, G; Pisani, A; Bruschetta, D; Milardi, D; Princi, P; Gucciardi, P G; Bramanti, P; Soscia, L; Favaloro, A

    2007-12-01

    The dystrophin-glycoprotein complex and the vinculin-talin-integrin system constitute, together a protein machinery, called costameres. The dystrophin-glycoprotein complex contains, among other proteins, also dystrophin and the sarcoglycans subcomplex, proteins playing a key role in the pathogenesis of many muscular dystrophies and linking the cytoplasmic myofibrillar contractile elements to the signal transducing molecules of the extracellular matrix, also providing structural support to the sarcolemma. The vinculin-talin-integrin system connects some components of the extracellular matrix with intermediate filaments of desmin, forming transverse bridges between Z and M lines. In our previous reports we always studied these systems by confocal laser scanning microscopy (CLSM). In this paper we report on the first applications of optical near-field fluorescence microscopy to the spatial localization of alpha-sarcoglycan and beta1D-integrin in human skeletal muscle fibres in order to better compare and test the images obtained with conventional CLSM and with scanning near-field optical microscopy (SNOM). In addition, the analysis of the surface morphology, and the comparison with the fluorescence map is put forward and analyzed for the first time on human muscle fibres. In aperture-SNOM the sample is excited through the nanometre-scale aperture produced at the apex of an optical fibre after tapering and subsequent metal coating. The acquisition of the topography map, simultaneously to the optical signal, by SNOM, permits to exactly overlap the fluorescence images obtained from the two consecutive scans needed for the double localization. Besides, the differences between the topography and the optical spatial patterns permit to assess the absence of artefacts in the fluorescence maps. Although the SNOM represented a good method of analysis, this technique remains a complementary method to the CLSM and it can be accepted in order to confirm the hypothesis advanced by

  19. Penetrability of AH plus and MTA fillapex after endodontic treatment and retreatment: a confocal laser scanning microscopy study.

    Science.gov (United States)

    Kok, Daniela; Rosa, Ricardo Abreu da; Barreto, Mirela Sangoi; Busanello, Fernanda Hoffmann; Santini, Manuela Favarin; Pereira, Jefferson Ricardo; Só, Marcus Vinícius Reis

    2014-06-01

    The aim of the study was to assess the penetrability of two endodontic sealers (AH Plus and MTA Fillapex) into dentinal tubules, submitted to endodontic treatment and subsequently to endodontic retreatment. Thirty ex vivo incisors were prepared using ProTaper rotary system up to F3 instrument and divided in three groups according to the endodontic sealer used for root canal filling: AH Plus (AHP), MTA Fillapex (MTAF), and control group (CG) without using EDTA previously to the root canal filling. Rhodamine B dye (red) was incorporated to the sealers in order to provide the fluorescence which will enable confocal laser scanning microscopy (CLSM) assessment. All specimens were filled with gutta-percha cones using the lateral compaction technique. The specimens were submitted to endodontic retreatment using ProTaper Retreatment system, re-prepared up to F5 instruments and filled with gutta-percha cones and the same sealer used during endodontic retreatment. Fluorescein dye (green) was incorporated to the sealer in order to distinguish from the first filling. The roots were sectioned 2 mm from the apex and assessed by CLSM. No difference was found between the two experimental groups (P > 0.05). On the other hand, in the control group the sealers were not capable to penetrate into dentinal tubules after endodontic treatment (P > 0.05). In retreatment cases, none of the sealers were able to penetrate into dentin tubules. It can be concluded that sealer penetrability is high during endodontic treatment. However, MTA Fillapex and AH Plus do not penetrate into dentinal tubules after endodontic retreatment. © 2014 Wiley Periodicals, Inc.

  20. Analysis of a marine phototrophic biofilm by confocal laser scanning microscopy using the new image quantification software PHLIP

    Directory of Open Access Journals (Sweden)

    Almeida Jonas S

    2006-01-01

    Full Text Available Abstract Background Confocal laser scanning microscopy (CLSM is the method of choice to study interfacial biofilms and acquires time-resolved three-dimensional data of the biofilm structure. CLSM can be used in a multi-channel modus where the different channels map individual biofilm components. This communication presents a novel image quantification tool, PHLIP, for the quantitative analysis of large amounts of multichannel CLSM data in an automated way. PHLIP can be freely downloaded from http://phlip.sourceforge.net. Results PHLIP is an open source public license Matlab toolbox that includes functions for CLSM imaging data handling and ten image analysis operations describing various aspects of biofilm morphology. The use of PHLIP is here demonstrated by a study of the development of a natural marine phototrophic biofilm. It is shown how the examination of the individual biofilm components using the multi-channel capability of PHLIP allowed the description of the dynamic spatial and temporal separation of diatoms, bacteria and organic and inorganic matter during the shift from a bacteria-dominated to a diatom-dominated phototrophic biofilm. Reflection images and weight measurements complementing the PHLIP analyses suggest that a large part of the biofilm mass consisted of inorganic mineral material. Conclusion The presented case study reveals new insight into the temporal development of a phototrophic biofilm where multi-channel imaging allowed to parallel monitor the dynamics of the individual biofilm components over time. This application of PHLIP presents the power of biofilm image analysis by multi-channel CLSM software and demonstrates the importance of PHLIP for the scientific community as a flexible and extendable image analysis platform for automated image processing.

  1. The simplicity of males: dwarf males of four species of Osedax (Siboglinidae; Annelida) investigated by confocal laser scanning microscopy.

    Science.gov (United States)

    Worsaae, Katrine; Rouse, Greg W

    2010-02-01

    Dwarf males of the bone-eating worms Osedax (Siboglinidae, Annelida) have been proposed to develop from larvae that settle on females rather than on bone. The apparent arrest in somatic development and resemblance of the males to trochophore larvae has been posited as an example of paedomorphosis. Here, we present the first investigation of the entire muscle and nervous system in dwarf males of Osedax frankpressi, O. roseus, O. rubiplumus, and O. "spiral" analyzed by multistaining and confocal laser scanning microscopy. Sperm shape and spermiogenesis, the sperm duct and internal and external ciliary patterns were likewise visualized. The males of all four species possess morphological traits typical of newly settled siboglinid larvae: a prostomium, a peristomium with a prototroch, one elongate segment and a second shorter segment. Each segment has a ring of eight long-handled hooked chaetae. The longitudinal muscles are distributed as evenly spaced strands forming a grid with the thin outer circular muscles. Oblique protractor and retractor muscles are associated with each of the chaetal sacs. The nervous system comprises a cerebral ganglion, a prototroch nerve ring, paired dorsolateral longitudinal nerves, five ventral longitudinal nerves with paired, posterior ganglia and a terminal commissure, as well as a net of fine peripheral transverse plexuses surrounding the first segment. Internal ciliation occurs as paired ventrolateral bands along the first segment. The bands appear to lead the free mature sperm to a ciliated duct and seminal vesicle lying just behind the prototroch region. A duct then runs from the seminal vesicle into the dorsal part of the prostomium. The similarity of Osedax males to the larvae of Osedax and other siboglinid annelids as well as similarities shown here to the neuromuscular organization seen in other annelid larvae supports the hypothesis of paedomorphosis in males of Osedax.

  2. Effects of two desensitizing dentifrices on dentinal tubule occlusion with citric acid challenge: Confocal laser scanning microscopy study

    Directory of Open Access Journals (Sweden)

    Sneha Anil Rajguru

    2017-01-01

    Full Text Available Background: Dentin hypersensitivity results when patent tubules are exposed to pain-inducing external stimuli. Aim: This study aims to compare the effects of two desensitizing dentifrices containing NovaMin and arginine on dentinal tubule occlusion with and without citric acid challenge in vitro using confocal laser scanning microscopy (CLSM. Materials and Methods: Forty dentin discs were randomly divided into Groups I and II containing twenty specimens each, treated with NovaMin and arginine-containing dentifrices, respectively. Groups I and II were divided into subgroups A and B where IA and IIA underwent CLSM analysis to determine the percentage of tubule occlusion while IB and IIB underwent 0.3% citric acid challenge and CLSM analysis. A novel grading system was devised to categorize tubule occlusion. Results: In Group II, the percentage of occluded tubules was highest for IIA (72.25% ± 10.57% and least for IIB (42.55% ± 8.65% having statistical significance (P < 0.0005. In Group I, the difference between IA (49.9% ± 12.96% and IB (43.15% ± 12.43% was statistically insignificant (P = 0.249. On the comparison between IB and IIB statistically indifferent result was obtained (P = 0.901, whereas the difference between IA and IIA was statistically significant (P < 0.001. The results of grading system were for IA 50% of samples belonged to Grade 2, for IIA 60% - Grade 3, and for IB 70% and for IIB 90% - Grade 2. Conclusion: Dentinal tubule occlusion with arginine-containing dentifrice was significantly higher than NovaMin. However, it could not resist citric acid challenge as effectively as NovaMin. The effects of NovaMin were more sustainable as compared to arginine-containing dentifrice, thus proving to be a better desensitizing agent.

  3. Scanning electron microscopy comparison of the cleaning efficacy of a root canal system by Nd:YAG laser and rotary instruments.

    Science.gov (United States)

    Samiei, Mohammad; Pakdel, Seyyed Mahdi Vahid; Rikhtegaran, Sahand; Shakoei, Sahar; Ebrahimpour, Delaram; Taghavi, Pedram

    2014-08-01

    This study evaluated the cleaning efficacy of a root canal system by Nd:YAG laser and rotary instruments. Sixty single-rooted human teeth were divided into four experimental groups (n=15). In the first group the teeth were prepared with a step-back technique using conventional K-files. In the second and third groups, tooth preparation was carried out using Nd:YAG laser and rotary NiTi instruments, respectively. Teeth in the fourth group were prepared by combined laser and rotary methods. The smear layer remaining on canal walls was then assessed by scanning electron microscopy in the coronal, middle, and apical portions. The comparison of smear layer removal efficacy between groups was carried out by Kruskal-Wallis and Mann-Whitney U tests. The mean grades of smear layer removal in rotary-laser, rotary, laser and step-back techniques were 1.34 ± 0.18, 2.2 ± 0.28, 1.91 ± 0.25, and 2.42 ± 0.19, respectively. On the whole, differences between rotary-laser and rotary groups, step-back, and the three other techniques (rotary, laser, and rotary-laser) were significant at p=0.034. Based on the findings of this study, the cleaning efficacy of rotary, laser, and rotary-laser techniques were better than the step-back technique and the combined laser and rotary technique was the most efficient method.

  4. Vacuum scanning capillary photoemission microscopy

    DEFF Research Database (Denmark)

    Aseyev, S.A.; Cherkun, A P; Mironov, B N

    2017-01-01

    We demonstrate the use of a conical capillary in a scanning probe microscopy for surface analysis. The probe can measure photoemission from a substrate by transmitting photoelectrons along the capillary as a function of probe position. The technique is demonstrated on a model substrate consisting...

  5. High Resolution Scanning Ion Microscopy

    NARCIS (Netherlands)

    Castaldo, V.

    2011-01-01

    The structure of the thesis is the following. The first chapter is an introduction to scanning microscopy, where the path that led to the Focused Ion Beam (FIB) is described and the main differences between electrons and ion beams are highlighted. Chapter 2 is what is normally referred to (which I

  6. Scanning electron microscopy and ablation rates of hard dental tissue using 350-fs and 1-ns laser pulses

    Science.gov (United States)

    Neev, Joseph; Huynh, Daniel S.; Dan, Claudiu C.; White, Joel M.; Da Silva, Luiz B.; Feit, Michael D.; Matthews, Dennis L.; Perry, Michael D.; Rubenchik, Alexander M.; Stuart, Brent C.

    1996-04-01

    Lasers are currently limited in their ability to remove hard tissue. Furthermore, many laser systems, such as the long pulse infrared lasers used to ablate bone or hard dental tissue, also generate unacceptable heat levels and cause collateral tissue damage. Ultrashort pulse lasers, however, are highly efficient, quiet, and relatively free of charge. With recent developments now allowing operation at high pulse repetition rates, ultrashort pulse systems can yield significant material volume removal which can potentially match or even exceed conventional technology while still maintaining the minimal collateral damage characteristics. In this paper, the interaction characteristics of two pulse regimes with enamel and dentin: 350 fs pulse ablation of hard dental tissues is compared to the interaction with one nanosecond pulses. Ablation rates were characterized and surface morphology, and structure were evaluated using a scanning electron microscope.

  7. [Scanning electron microscopy was used to observe dentin morphology in primary and permanent teeth treated by erbium: yttrium-aluminum-garnet laser].

    Science.gov (United States)

    Zhang, Sun; Chen, Tao; Ge, Li-hong

    2011-10-18

    To observe the morphological change of cavities in teeth prepared using the erbium: yttrium-aluminum-garnet (Er:YAG) laser with different parameters. Ten extracted cavity-free molars were divided into control group and experiment group. The control group included 2 permanent teeth and 2 primary teeth. The experiment group was divided into 3 groups according to the different laser parameters. Group 1 included 2 permanent teeth, while group 2 and group 3 included 2 primary teeth respectively. Cavities were prepared using traditional handpieces in the control group or the Er: YAG laser with different parameters in the experiment group (group 1: Er:YAG laser 20 Hz/200 mJ,group 2: Er:YAG laser 10 Hz/300 mJ,group 3: Er:YAG laser 10 Hz/400 mJ) .The samples were made for Scanning Electron Microscopy(SEM) analysis. The dentin surface of cavities using Er:YAG laser showed no formation of smear layer and open dentinal tubules. Dentin melting was not detected after preparation of groups 1 and 2. There were cracks and micro-fissures in the dentin surface of the primary teeth prepared using Er:YAG laser 10 Hz/400 mJ. Appropriate Er:YAG laser parameters(groups1 and 2) were effective and safe for ablation of hard tissue of primary and permanent teeth. The high power Er: YAG laser 10 Hz/400 mJ would damage the dentin surface when used in primary teeth.

  8. Medicinal value of asiaticoside for Alzheimer's disease as assessed using single-molecule-detection fluorescence correlation spectroscopy, laser-scanning microscopy, transmission electron microscopy, and in silico docking.

    Science.gov (United States)

    Hossain, Shahdat; Hashimoto, Michio; Katakura, Masanori; Al Mamun, Abdullah; Shido, Osamu

    2015-04-14

    Identifying agents that inhibit amyloid beta peptide (Aβ) aggregation is the ultimate goal for slowing Alzheimer's disease (AD) progression. This study investigated whether the glycoside asiaticoside inhibits Aβ1-42 fibrillation in vitro. Fluorescence correlation spectroscopy (FCS), evaluating the Brownian diffusion times of moving particles in a small confocal volume at the single-molecule level, was used. If asiaticoside inhibits early Aβ1-42 fibrillation steps, more Aβs would remain free and rapidly diffuse in the confocal volume. In contrast, "weaker or no inhibition" permits a greater number of Aβs to polymerize into oligomers, leading to fibers and gives rise to slow diffusion times in the solution. Trace amounts of 5-carboxytetramethylrhodamine (TAMRA)-labeled Aβ1-42 in the presence of excess unlabeled Aβ1-42 (10 μM) was used as a fluorescent probe. Steady-state and kinetic-Thioflavin T (ThT) fluorospectroscopy, laser-scanning fluorescence microscopy (LSM), and transmission electron microscopy (TEM) were also used to monitor fibrillation. Binding of asiaticoside with Aβ1-42 at the atomic level was computationally examined using the Molegro Virtual Docker and PatchDock. With 1 h of incubation time for aggregation, FCS data analysis revealed that the diffusion time of TAMRA-Aβ1-42 was 208 ± 4 μs, which decreased to 164 ± 8.0 μs in the presence of asiaticoside, clearly indicating that asiaticoside inhibited the early stages Aβ1-42 of fibrillation, leaving more free Aβs in the solution and permitting their rapid diffusion in the confocal volume. The inhibitory effects were also evidenced by reduced fiber formation as assessed by steady-state and kinetic ThT fluorospectroscopy, LSM, and TEM. Asiaticoside elongated the lag phase of Aβ1-42 fibrillation, indicating the formation of smaller amyloid species were impaired in the presence of asiaticoside. Molecular docking revealed that asiaticoside binds with amyloid intra- and inter-molecular amino

  9. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  10. Distribution of biomolecules in porous nitrocellulose membrane pads using confocal laser scanning microscopy and high-speed cameras.

    Science.gov (United States)

    Mujawar, Liyakat Hamid; Maan, Abid Aslam; Khan, Muhammad Kashif Iqbal; Norde, Willem; van Amerongen, Aart

    2013-04-02

    The main focus of our research was to study the distribution of inkjet printed biomolecules in porous nitrocellulose membrane pads of different brands. We produced microarrays of fluorophore-labeled IgG and bovine serum albumin (BSA) on FAST, Unisart, and Oncyte-Avid slides and compared the spot morphology of the inkjet printed biomolecules. The distribution of these biomolecules within the spot embedded in the nitrocellulose membrane was analyzed by confocal laser scanning microscopy in the "Z" stack mode. By applying a "concentric ring" format, the distribution profile of the fluorescence intensity in each horizontal slice was measured and represented in a graphical color-coded way. Furthermore, a one-step diagnostic antibody assay was performed with a primary antibody, double-labeled amplicons, and fluorophore-labeled streptavidin in order to study the functionality and distribution of the immune complex in the nitrocellulose membrane slides. Under the conditions applied, the spot morphology and distribution of the primary labeled biomolecules was nonhomogenous and doughnut-like on the FAST and Unisart nitrocellulose slides, whereas a better spot morphology with more homogeneously distributed biomolecules was observed on the Oncyte-Avid slide. Similar morphologies and distribution patterns were observed when the diagnostic one-step nucleic acid microarray immunoassay was performed on these nitrocellulose slides. We also investigated possible reasons for the differences in the observed spot morphology by monitoring the dynamic behavior of a liquid droplet on and in these nitrocellulose slides. Using high speed cameras, we analyzed the wettability and fluid flow dynamics of a droplet on the various nitrocellulose substrates. The spreading of the liquid droplet was comparable for the FAST and Unisart slides but different, i.e., slower, for the Oncyte-Avid slide. The results of the spreading of the droplet and the penetration behavior of the liquid in the

  11. 3D digital image processing for biofilm quantification from confocal laser scanning microscopy: Multidimensional statistical analysis of biofilm modeling

    Science.gov (United States)

    Zielinski, Jerzy S.

    The dramatic increase in number and volume of digital images produced in medical diagnostics, and the escalating demand for rapid access to these relevant medical data, along with the need for interpretation and retrieval has become of paramount importance to a modern healthcare system. Therefore, there is an ever growing need for processed, interpreted and saved images of various types. Due to the high cost and unreliability of human-dependent image analysis, it is necessary to develop an automated method for feature extraction, using sophisticated mathematical algorithms and reasoning. This work is focused on digital image signal processing of biological and biomedical data in one- two- and three-dimensional space. Methods and algorithms presented in this work were used to acquire data from genomic sequences, breast cancer, and biofilm images. One-dimensional analysis was applied to DNA sequences which were presented as a non-stationary sequence and modeled by a time-dependent autoregressive moving average (TD-ARMA) model. Two-dimensional analyses used 2D-ARMA model and applied it to detect breast cancer from x-ray mammograms or ultrasound images. Three-dimensional detection and classification techniques were applied to biofilm images acquired using confocal laser scanning microscopy. Modern medical images are geometrically arranged arrays of data. The broadening scope of imaging as a way to organize our observations of the biophysical world has led to a dramatic increase in our ability to apply new processing techniques and to combine multiple channels of data into sophisticated and complex mathematical models of physiological function and dysfunction. With explosion of the amount of data produced in a field of biomedicine, it is crucial to be able to construct accurate mathematical models of the data at hand. Two main purposes of signal modeling are: data size conservation and parameter extraction. Specifically, in biomedical imaging we have four key problems

  12. Dynamic behavior of binary component ion-exchange displacement chromatography of proteins visualized by confocal laser scanning microscopy.

    Science.gov (United States)

    Shi, Qing-Hong; Shi, Zhi-Cong; Sun, Yan

    2012-09-28

    Confocal laser scanning microscopy (CLSM) was introduced to visualize particle-scale binary component protein displacement behavior in Q Sepharose HP column. To this end, displacement chromatography of two intrinsic fluorescent proteins, enhanced green fluorescent protein (eGFP) and red fluorescent protein (RFP), were developed using sodium saccharin (NaSac) as a displacer. The results indicated that RFP as well as eGFP could be effectively displaced in the single-component experiments by 50 mmol/L NaSac at 120 and 140 mmol/L NaCl whereas a fully developed displacement train with eGFP and RFP was only observed at 120 mmol/L NaCl in binary component displacement. At 140 mmol/L NaCl, there was a serious overlapping of the zones of the two proteins, indicating the importance of induced-salt effect on the formation of an isotachic displacement train. CLSM provided particle-scale evidence that induced-salt effect occurred likewise in the interior of an adsorbent and was synchronous to the introduction of the displacer. CLSM results at 140 mmol/L NaCl also demonstrated that both the proteins had the same fading rate at 50 mmol/L NaSac in the initial stage, suggesting the same displacement ability of NaSac to both the proteins. In the final stage, the fading rate of RFP in the adsorbent became slow, particularly at lower displacer concentrations. In the binary component displacement, the two proteins exhibited distinct fading rates as compared to the single component displacement and the remarkable lagging of the fading rate was observed in protein displacements. It suggested that the co-adsorbed proteins had significant influence on the formation of an isotachic train and the displacement chromatography of the proteins. Therefore, this research provided particle-scale insight into the dynamic behavior and complexity in the displacement of proteins. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. In vivo laser scanning confocal microscopy of the cornea in patients with silicone oil tamponade after vitreoretinal surgery.

    Science.gov (United States)

    Le, Qihua; Wang, Xin; Lv, Jiahua; Sun, Xinghuai; Xu, Jianjiang

    2012-08-01

    To evaluate the morphological changes in the cornea by in vivo laser scanning confocal microscopy (LSCM) in a large case series with silicone oil endotamponade after vitreoretinal surgery and to explore the value of LSCM in the early detection of silicone keratopathy (SK). Ninety-nine patients (99 eyes) with silicone oil endotamponade after vitreoretinal surgery were included in the current study. Slit-lamp examination and measurement of intraocular pressure (IOP) were performed first. Then the central corneas of the subjects' eyes were examined by in vivo LSCM. The analysis of images of each corneal layer was performed and the endothelial cellular density (ECD), endothelial cellular area (ECA), coefficient of variation of cell size (CoV), and percentage of hexagonal cells (PHC) were measured. Moreover, the total size of stromal deposits was measured, and the correlation between the size of deposits and the parameters of endothelial cells was analyzed. Clinically recognizable abnormalities involving the cornea were identified in only 12 eyes (12.1%) under slit-lamp biomicroscopy, whereas in vivo LSCM revealed morphological abnormalities in 40 eyes (40.4%). The manifestations of endothelial lesions varied from decreased cellular density, increased polymegathism and pleomorphism to hyperreflective silicone oil membrane or droplets adhering to the endothelium. Moreover, hyperreflective deposits with various shapes could be identified in both posterior and anterior stroma, along with the infiltration of Langerhans cells beneath the epithelium. The average ECD and PHC of eyes with corneal abnormalities were significantly lower than those of normal corneas, whereas the average ECA and CoV were significantly larger (all Ps < 0.001). The patients with corneal abnormalities were significantly older than those others (P = 0.003). The rate of pseudophakic and aphakic eyes having corneal abnormalities was significantly higher than that of phakic eyes (P = 0.045). Interestingly

  14. Scanning laser Doppler vibrometry

    DEFF Research Database (Denmark)

    Brøns, Marie; Thomsen, Jon Juel

    With a Scanning Laser Doppler Vibrometer (SLDV) a vibrating surface is automatically scanned over predefined grid points, and data processed for displaying vibration properties like mode shapes, natural frequencies, damping ratios, and operational deflection shapes. Our SLDV – a PSV-500H from...

  15. SCANNING ELECTRON MICROSCOPY OF “ROSA” FILTER ELEMENTS FROM HEMOFENIX APPARATUS, AND OF BLOOD IN MEMBRANE PLASMAPHERESIS AND LASER IRRADIATION

    Directory of Open Access Journals (Sweden)

    I. M. Baybekov

    2013-01-01

    Full Text Available Aim. To study with scanning electron microscopy an interaction between structural elements of “Rosa” filters (a component of HEMOFENIХ with erythrocytes during membrane plasmapheresis and under the effect of la- ser irradiation performed during plasmapheresis. Materials and methods. Using scanning electron microscopy and morphometry, blood cells and plasma-filter components were studied in patients with myasthenia gravis. Results. It has been revealed that the percentage of pathologic forms of erythrocytes increased in peripheral blood of patients with myasthenia gravis. Plasmapheresis leads to an increase in the number of pathologic forms of erythrocytes in peripheral blood as well as on plasma-filter components. Conclusion. Laser irradiation, in turn, promotes the significant reduction of pathological forms of erythrocytes number in peripheral blood and on plasma-filter components. 

  16. Effect of different parameters of Er:YAG laser irradiations on class V composite restorations: A scanning electron microscopy study.

    Science.gov (United States)

    Ozel, Emre; Tuna, Elif Bahar; Firatli, Sonmez; Firatli, Erhan

    2016-09-01

    The purpose of this study was to compare different parameters of Er:YAG laser irradiations on the marginal microleakage of Class V resin composite restorations. A total of 45 extracted premolars were selected for the study. Class V cavities prepared on both buccal and lingual surfaces of teeth by Er:YAG laser or bur and divided into nine groups. The occlusal margins were in enamel and the cervical margins were in cementum. Group-1: bur preparation; Group-2: laser preparation (lp) (600 mJ/5 Hz); Group-3: lp (300 mJ/10 Hz); Group-4: lp (200 mJ/15 Hz); Group-5: lp (150 mJ/20 Hz); Group-6: lp (200 mJ/20 Hz); Group-7: lp (300 mJ/14 Hz); Group-8: lp (400 mJ/10 Hz); Group-9: lp (700 mJ/5 Hz). All teeth were stored in distilled water at 37°C for 24 h, then thermocycled 1,000 times (5-55°C). Five teeth from each group were chosen for the microleakage investigation and two teeth for the scanning electron microscope (SEM) evaluation. Teeth, which were prepared for the microleakage test were immersed in 0.5% methylene blue dye for 24 h. After immersing, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p  0.05). No significant difference was observed among groups in terms of occlusal and cervical surfaces, separately (p > 0.05). It may be concluded that the cavities prepared by Er:YAG laser showed higher degree of microleakage than bur prepared at cervical regions. Different parameters of Er:YAG laser irradiations affected microleakage. SCANNING 38:434-441, 2016. © 2016 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.

  17. Multifunctional scanning ion conductance microscopy.

    Science.gov (United States)

    Page, Ashley; Perry, David; Unwin, Patrick R

    2017-04-01

    Scanning ion conductance microscopy (SICM) is a nanopipette-based technique that has traditionally been used to image topography or to deliver species to an interface, particularly in a biological setting. This article highlights the recent blossoming of SICM into a technique with a much greater diversity of applications and capability that can be used either standalone, with advanced control (potential-time) functions, or in tandem with other methods. SICM can be used to elucidate functional information about interfaces, such as surface charge density or electrochemical activity (ion fluxes). Using a multi-barrel probe format, SICM-related techniques can be employed to deposit nanoscale three-dimensional structures and further functionality is realized when SICM is combined with scanning electrochemical microscopy (SECM), with simultaneous measurements from a single probe opening up considerable prospects for multifunctional imaging. SICM studies are greatly enhanced by finite-element method modelling for quantitative treatment of issues such as resolution, surface charge and (tip) geometry effects. SICM is particularly applicable to the study of living systems, notably single cells, although applications extend to materials characterization and to new methods of printing and nanofabrication. A more thorough understanding of the electrochemical principles and properties of SICM provides a foundation for significant applications of SICM in electrochemistry and interfacial science.

  18. In situ microspatial imaging using two-photon and confocal laser scanning microscopy of bacteria and extracellular polymeric secretions (EPS) within marine stromatolites.

    Science.gov (United States)

    Kawaguchi, Tomohiro; Decho, Alan W

    2002-03-01

    The combination of a hydrophilic embedding resin, Nanoplast, with fluorescent probes, and subsequent imaging using two-photon and confocal laser scanning microscopy (2P-LSM and CLSM) has allowed in imaging of the in situ microspatial arrangements of microbial cells and their extracellular polymeric secretion (EPS) within marine stromatolites. Optical sectioning by 2P-LSM and CLSM allowed imaging of endolithic cyanobacteria cells, Solentia sp., seen within carbonate sand grains. 2P-LSM allowed very clear imaging with a high resolution of bacteria using DAPI, which normally require UV excitation and reduced photo-bleaching of fluorescent probes.

  19. Real-time demonstration of split skin graft inosculation and integra dermal matrix neovascularization using confocal laser scanning microscopy.

    Science.gov (United States)

    Greenwood, John; Amjadi, Mahyar; Dearman, Bronwyn; Mackie, Ian

    2009-08-20

    During the first 48 hours after placement, an autograft "drinks" nutrients and dissolved oxygen from fluid exuding from the underlying recipient bed ("plasmatic imbibition"). The theory of inosculation (that skin grafts subsequently obtain nourishment via blood vessel "anastomosis" between new vessels invading from the wound bed and existing graft vessels) was hotly debated from the late 19th to mid-20th century. This study aimed to noninvasively observe blood flow in split skin grafts and Integra dermal regeneration matrix to provide further proof of inosculation and to contrast the structure of vascularization in both materials, reflecting mechanism. Observations were made both clinically and using confocal microscopy on normal skin, split skin graft, and Integra. The VivaScope allows noninvasive, real-time, in vivo images of tissue to be obtained. Observations of blood flow and tissue architecture in autologous skin graft and Integra suggest that 2 very different processes are occurring in the establishment of circulation in each case. Inosculation provides rapid circulatory return to skin grafts whereas slower neovascularization creates an unusual initial Integra circulation. The advent of confocal laser microscopy like the VivaScope 1500, together with "virtual" journals such as ePlasty, enables us to provide exciting images and distribute them widely to a "reading" audience. The development of the early Integra vasculature by neovascularization results in a large-vessel, high-volume, rapid flow circulation contrasting markedly from the inosculatory process in skin grafts and the capillary circulation in normal skin and merits further (planned) investigation.

  20. Penetration of tamoxifen citrate loaded ethosomes and liposomes across human skin: a comparative study with confocal laser scanning microscopy.

    Science.gov (United States)

    Sarwa, Khomendra K; Suresh, Preeti K; Rudrapal, Mithun; Verma, Vinod K

    2014-01-01

    In the present study, ethosomal and liposomal formulations containing tamoxifen citrate were prepared and evaluated for their penetration properties in human cadaver skin using Franz diffusion cell and confocal laser scanning microscope (CLSM). The results clearly revealed that ethosomal vesicles showed a better drug permeation profile than that of liposomal vesicles. In addition, low fluorescence intensity in CLSM was recorded with liposomes as compared to ethosomes, indicating lower cumulative amount of drug permeation from liposomal vesicles. Furthermore, CLSM showed uniform fluorescence intensity across the entire depth of skin in ethosomal treatment, indicating high penetrability of ethosomal vesicles through human cadaver skin. In contrast, low penetrability of conventional liposomal vesicles was recorded as penetration was limited to the 7(th) section (i.e. upper epidermis layer) of skin as evident from visualization of intact liposomal vesicles in CLSM.

  1. Laser Beam Scanning Device.

    Science.gov (United States)

    metal mirror. Multiple thermocouple wires attached to the rear of the mirror provide temperature (and hence beam power) information at various points...on the mirror. Scanning is achieved by means of a selector switch which sequentially samples the thermocouple outputs. The thermocouple output voltages are measured and recorded as a function of laser beam power.

  2. Scanning Electrochemical Microscopy in Neuroscience

    Science.gov (United States)

    Schulte, Albert; Nebel, Michaela; Schuhmann, Wolfgang

    2010-07-01

    This article reviews recent work involving the application of scanning electrochemical microscopy (SECM) to the study of individual cultured living cells, with an emphasis on topographical and functional imaging of neuronal and secretory cells of the nervous and endocrine system. The basic principles of biological SECM and associated negative amperometric-feedback and generator/collector-mode SECM imaging are discussed, and successful use of the methodology for screening soft and fragile membranous objects is outlined. The drawbacks of the constant-height mode of probe movement and the benefits of the constant-distance mode of SECM operation are described. Finally, representative examples of constant-height and constant-distance mode SECM on a variety of live cells are highlighted to demonstrate the current status of single-cell SECM in general and of SECM in neuroscience in particular.

  3. Scanning Probe Microscopy of Graphene

    Science.gov (United States)

    Tautz, Pamela

    2011-10-01

    Scanning tunneling microscopy has been used to study the unusual electronic properties of graphene. In an effort to support the graphene with minimal interaction with the substrate, we used a hexagonal boron nitride (hBN) substrate. To minimize contaminants between the CVD graphene and boron nitride, the graphene samples were cleaned with distilled water and isopropanol prior to transfer to hBN substrate. We have also examined the growth of graphene flakes by chemical vapor deposition. In particular, we examined the relationship between the orientations of the first and second layer of CVD grown graphene. We found the growth mechanism preferentially resulted in rotations of 9^o or less indicating flakes with first and second layers aligned.

  4. A comparative scanning electron microscopy study between hand instrument, ultrasonic scaling and erbium doped:Yttirum aluminum garnet laser on root surface: A morphological and thermal analysis

    Science.gov (United States)

    Mishra, Mitul Kumar; Prakash, Shobha

    2013-01-01

    Background and Objectives: Scaling and root planing is one of the most commonly used procedures for the treatment of periodontal diseases. Removal of calculus using conventional hand instruments is incomplete and rather time consuming. In search of more efficient and less difficult instrumentation, investigators have proposed lasers as an alternative or as adjuncts to scaling and root planing. Hence, the purpose of the present study was to evaluate the effectiveness of erbium doped: Yttirum aluminum garnet (Er:YAG) laser scaling and root planing alone or as an adjunct to hand and ultrasonic instrumentation. Subjects and Methods: A total of 75 freshly extracted periodontally involved single rooted teeth were collected. Teeth were randomly divided into five treatment groups having 15 teeth each: Hand scaling only, ultrasonic scaling only, Er:YAG laser scaling only, hand scaling + Er:YAG laser scaling and ultrasonic scaling + Er:YAG laser scaling. Specimens were subjected to scanning electron microscopy and photographs were evaluated by three examiners who were blinded to the study. Parameters included were remaining calculus index, loss of tooth substance index, roughness loss of tooth substance index, presence or absence of smear layer, thermal damage and any other morphological damage. Results: Er:YAG laser treated specimens showed similar effectiveness in calculus removal to the other test groups whereas tooth substance loss and tooth surface roughness was more on comparison with other groups. Ultrasonic treated specimens showed better results as compared to other groups with different parameters. However, smear layer presence was seen more with hand and ultrasonic groups. Very few laser treated specimens showed thermal damage and morphological change. Interpretation and Conclusion: In our study, ultrasonic scaling specimen have shown root surface clean and practically unaltered. On the other hand, hand instrument have produced a plane surface, but removed more

  5. A comparative scanning electron microscopy study between hand instrument, ultrasonic scaling and erbium doped:Yttirum aluminum garnet laser on root surface: A morphological and thermal analysis

    Directory of Open Access Journals (Sweden)

    Mitul Kumar Mishra

    2013-01-01

    Full Text Available Background and Objectives: Scaling and root planing is one of the most commonly used procedures for the treatment of periodontal diseases. Removal of calculus using conventional hand instruments is incomplete and rather time consuming. In search of more efficient and less difficult instrumentation, investigators have proposed lasers as an alternative or as adjuncts to scaling and root planing. Hence, the purpose of the present study was to evaluate the effectiveness of erbium doped: Yttirum aluminum garnet (Er:YAG laser scaling and root planing alone or as an adjunct to hand and ultrasonic instrumentation. Subjects and Methods: A total of 75 freshly extracted periodontally involved single rooted teeth were collected. Teeth were randomly divided into five treatment groups having 15 teeth each: Hand scaling only, ultrasonic scaling only, Er:YAG laser scaling only, hand scaling + Er:YAG laser scaling and ultrasonic scaling + Er:YAG laser scaling. Specimens were subjected to scanning electron microscopy and photographs were evaluated by three examiners who were blinded to the study. Parameters included were remaining calculus index, loss of tooth substance index, roughness loss of tooth substance index, presence or absence of smear layer, thermal damage and any other morphological damage. Results: Er:YAG laser treated specimens showed similar effectiveness in calculus removal to the other test groups whereas tooth substance loss and tooth surface roughness was more on comparison with other groups. Ultrasonic treated specimens showed better results as compared to other groups with different parameters. However, smear layer presence was seen more with hand and ultrasonic groups. Very few laser treated specimens showed thermal damage and morphological change. Interpretation and Conclusion: In our study, ultrasonic scaling specimen have shown root surface clean and practically unaltered. On the other hand, hand instrument have produced a plane surface

  6. Hollow-tip scanning photoelectron microscopy

    Science.gov (United States)

    Cherkun, A. P.; Mironov, B. N.; Aseyev, S. A.; Chekalin, S. V.

    2014-07-01

    A new type of microscopy based on scanning in vacuum by a beam of charged particles transmitted through a hollow probe has been implemented. This approach provides controllable motion of spatially localized ion, electron, molecular (atomic), and soft X-ray beams and investigation of the surface in the shear force mode. In the photoelectron mode, in which electrons are transmitted through a 2-μm quartz capillary, a surface profile of gadolinium irradiated by 400-nm femtosecond laser pulses has been visualized with a subwave spatial resolution. The new method of microscopy opens an opportunity of investigations in the field of nanometer local photodesorption of molecular ions (one of the last ideas of V.S. Letokhov).

  7. A dark mode in scanning thermal microscopy

    Science.gov (United States)

    Ramiandrisoa, Liana; Allard, Alexandre; Joumani, Youssef; Hay, Bruno; Gomés, Séverine

    2017-12-01

    The need for high lateral spatial resolution in thermal science using Scanning Thermal Microscopy (SThM) has pushed researchers to look for more and more tiny probes. SThM probes have consequently become more and more sensitive to the size effects that occur within the probe, the sample, and their interaction. Reducing the tip furthermore induces very small heat flux exchanged between the probe and the sample. The measurement of this flux, which is exploited to characterize the sample thermal properties, requires then an accurate thermal management of the probe-sample system and to reduce any phenomenon parasitic to this system. Classical experimental methodologies must then be constantly questioned to hope for relevant and interpretable results. In this paper, we demonstrate and estimate the influence of the laser of the optical force detection system used in the common SThM setup that is based on atomic-force microscopy equipment on SThM measurements. We highlight the bias induced by the overheating due to the laser illumination on the measurements performed by thermoresistive probes (palladium probe from Kelvin Nanotechnology). To face this issue, we propose a new experimental procedure based on a metrological approach of the measurement: a SThM "dark mode." The comparison with the classical procedure using the laser shows that errors between 14% and 37% can be reached on the experimental data exploited to determine the heat flux transferred from the hot probe to the sample.

  8. An imaging dataset of cervical cells using scanning near-field optical microscopy coupled to an infrared free electron laser

    Science.gov (United States)

    Halliwell, Diane E.; Morais, Camilo L. M.; Lima, Kássio M. G.; Trevisan, Júlio; Siggel-King, Michele R. F.; Craig, Tim; Ingham, James; Martin, David S.; Heys, Kelly; Kyrgiou, Maria; Mitra, Anita; Paraskevaidis, Evangelos; Theophilou, Georgios; Martin-Hirsch, Pierre L.; Cricenti, Antonio; Luce, Marco; Weightman, Peter; Martin, Francis L.

    2017-07-01

    Using a scanning near-field optical microscope coupled to an infrared free electron laser (SNOM-IR-FEL) in low-resolution transmission mode, we collected chemical data from whole cervical cells obtained from 5 pre-menopausal, non-pregnant women of reproductive age, and cytologically classified as normal or with different grades of cervical cell dyskaryosis. Imaging data are complemented by demography. All samples were collected before any treatment. Spectra were also collected using attenuated total reflection, Fourier-transform (ATR-FTIR) spectroscopy, to investigate the differences between the two techniques. Results of this pilot study suggests SNOM-IR-FEL may be able to distinguish cervical abnormalities based upon changes in the chemical profiles for each grade of dyskaryosis at designated wavelengths associated with DNA, Amide I/II, and lipids. The novel data sets are the first collected using SNOM-IR-FEL in transmission mode at the ALICE facility (UK), and obtained using whole cells as opposed to tissue sections, thus providing an 'intact' chemical profile. These data sets are suited to complementing future work on image analysis, and/or applying the newly developed algorithm to other datasets collected using the SNOM-IR-FEL approach.

  9. Morphologic analysis, by means of scanning electron microscopy, of the effect of Er: YAG laser on root surfaces submitted to scaling and root planing

    Directory of Open Access Journals (Sweden)

    Theodoro Letícia Helena

    2002-01-01

    Full Text Available The purpose of this study was to morphologically evaluate, by means of scanning electron microscopy, the effects of Er:YAG laser on the treatment of root surfaces submitted to scaling and root planing with conventional periodontal instruments. Eighteen root surfaces (n = 18, which had been previously scaled and planed, were assigned to 3 groups (n = 6. The control Group (G1 received no further treatment; Group 2 (G2 was irradiated with Er:YAG laser (2.94 mum, with 47 mJ/10 Hz, in a focused mode with air/water spray during 15 s and with 0.57 J/cm² of fluency per pulse; Group 3 (G 3 was irradiated with Er:YAG laser (2.94 mum, with 83 mJ/10 Hz, in a focused mode with air/water spray during 15 s and with 1.03 J/cm² of fluency per pulse. We concluded that the parameters adopted for Group 3 removed the smear layer from the root surface, exposing the dentinal tubules. Although no fissures, cracks or carbonized areas were observed, an irregular surface was produced by Er:YAG laser irradiation. Thus, the biocompatibility of the irradiated root surface, within the periodontal healing process, must be assessed.

  10. Sealing ability of three root-end filling materials prepared using an erbium: Yttrium aluminium garnet laser and endosonic tip evaluated by confocal laser scanning microscopy

    Science.gov (United States)

    Nanjappa, A Salin; Ponnappa, KC; Nanjamma, KK; Ponappa, MC; Girish, Sabari; Nitin, Anita

    2015-01-01

    Aims: (1) To compare the sealing ability of mineral trioxide aggregate (MTA), Biodentine, and Chitra-calcium phosphate cement (CPC) when used as root-end filling, evaluated under confocal laser scanning microscope using Rhodamine B dye. (2) To evaluate effect of ultrasonic retroprep tip and an erbium:yttrium aluminium garnet (Er:YAG) laser on the integrity of three different root-end filling materials. Materials and Methods: The root canals of 80 extracted teeth were instrumented and obturated with gutta-percha. The apical 3 mm of each tooth was resected and 3 mm root-end preparation was made using ultrasonic tip (n = 30) and Er:YAG laser (n = 30). MTA, Biodentine, and Chitra-CPC were used to restore 10 teeth each. The samples were coated with varnish and after drying, they were immersed in Rhodamine B dye for 24 h. The teeth were then rinsed, sectioned longitudinally, and observed under confocal laser scanning microscope. Statistical Analysis Used: Data were analyzed using one-way analysis of variance (ANOVA) and a post-hoc Tukey's test at P ultrasonics, the difference was found to be statistically significant (P ultrasonics. PMID:26180420

  11. Scanning laser video camera/ microscope

    Science.gov (United States)

    Wang, C. P.; Bow, R. T.

    1984-10-01

    A laser scanning system capable of scanning at standard video rate has been developed. The scanning mirrors, circuit design and system performance, as well as its applications to video cameras and ultra-violet microscopes, are discussed.

  12. Morphological changes in hard dental tissues prepared by Er:YAG laser (LiteTouch, Syneron), Carisolv and rotary instruments. A scanning electron microscopy evaluation.

    Science.gov (United States)

    Tsanova, Snejana Ts; Tomov, Georgi T

    2010-01-01

    This in vitro investigation aimed to study by means of scanning electron microscope the morphological changes in hard dental tissues after using several different methods for caries removal and cavity preparation. Twenty freshly extracted human teeth with carious lesions were used in the study. They were assigned to four groups depending on the method used for preparation: Group 1--Cavity preparation using Er: YAG laser (LiteTouch, Syneron, Israel). Group 2--Chemomechanical preparation using colourless Carisolv gel (MediTeam AB, Savedalen, Sweden). Group 3--Mechanical rotary preparation using diamond burs and air turbine. Group 4--Mechanical rotary preparation using by steel burs and micromotor. The preparations were performed strictly according to the manufacturer's instructions for proper use of instruments. The teeth samples were prepared for histological study and investigated by a scanning electron microscope at different magnification; the morphological changes in the tissues were registered and compared. There were considerable differences in the surface characteristics of the dental tissues when we analysed the photomicrographs of the specimens obtained using scanning electron microscopy (SEM). The surface after laser treatment remained highly retentive with no residual smear layer; the second best results in this respect were registered when teeth were chemomechanically excavated with Carisolv gel. The mechanical methods of cavity preparation resulted in surfaces with a smear layer of dentin without any microretentions. The scanning electron microscopy of hard dental tissues prepared using steel and diamond burs showed surfaces covered with a thick smear layer that may be relevant to the subsequent bonding of adhesive restorative materials to the prepared cavity. In preparing the surface using a turbine with diamond burs the smear layer was thinner and part of the dentinal tubules orifices were open in the area of water turbulence. SEM analysis of hard

  13. In-vivo diagnosis and non-inasive monitoring of Imiquimod 5% cream for non-melanoma skin cancer using confocal laser scanning microscopy

    Science.gov (United States)

    Dietterle, S.; Lademann, J.; Röwert-Huber, H.-J.; Stockfleth, E.; Antoniou, C.; Sterry, W.; Astner, S.

    2008-10-01

    Basal cell carcinoma (BCC) is the most common cutaneous malignancy with increasing incidence rates worldwide. A number of established treatments are available, including surgical excision. The emergence of new non-invasive treatment modalities has prompted the development of non-invasive optical devices for therapeutic monitoring and evaluating treatment efficacy. This study was aimed to evaluate the clinical applicability of a fluorescence confocal laser scanning microscope (CFLSM) for non-invasive therapeutic monitoring of basal cell carcinoma treated with Imiquimod (Aldara®) as topical immune-response modifier. Eight participants with a diagnosis of basal cell carcinoma (BCC) were enrolled in this investigation. Sequential evaluation during treatment with Imiquimod showed progressive normalization of the confocal histomorphologic parameters in correlation with normal skin. Confocal laser scanning microscopy was able to identify characteristic features of BCC and allowed the visualization of therapeutic effects over time. Thus our results indicate the clinical applicability of CFLSM imaging to evaluate treatment efficacy in vivo and non-invasively.

  14. Spatially resolved analyses of uranium species using a coupled system made up of confocal laser-scanning microscopy (CLSM) and laser induced fluorescence spectroscopy (LIFS); Ortsaufgeloeste Analyse von Uranspezies mittels einem Gekoppelten System aus Konfokaler Laser-Scanning Mikroskopie (CLSM) und Laser Induzierter Fluoreszenzspektroskopie (LIFS)

    Energy Technology Data Exchange (ETDEWEB)

    Brockmann, S. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V. (VKTA), Dresden (Germany); Grossmann, K.; Arnold, T. [Helmholtz-Zentrum Dresden-Rossendorf e.V. (Germany). Inst. fuer Ressourcenoekologie

    2014-01-15

    The fluorescent properties of uranium when excited by UV light are used increasingly for spectroscope analyses of uranium species within watery samples. Here, alongside the fluorescent properties of the hexavalent oxidation phases, the tetra and pentavalent oxidation phases also play an increasingly important role. The detection of fluorescent emission spectrums on solid and biological samples using (time-resolved) laser induced fluorescence spectroscopy (TRLFS or LIFS respectively) has, however, the disadvantage that no statements regarding the spatial localisation of the uranium can be made. However, particularly in complex, biological samples, such statements on the localisation of the uranium enrichment in the sample are desired, in order to e.g. be able to distinguish between intra and extra-cellular uranium bonds. The fluorescent properties of uranium (VI) compounds and minerals can also be used to detect their localisation within complex samples. So the application of fluorescent microscopic methods represents one possibility to localise and visualise uranium precipitates and enrichments in biological samples, such as biofilms or cells. The confocal laser-scanning microscopy (CLSM) is especially well suited to this purpose. Coupling confocal laser-scanning microscopy (CLSM) with laser induced fluorescence spectroscopy (LIFS) makes it possible to localise and visualise fluorescent signals spatially and three-dimensionally, while at the same time being able to detect spatially resolved, fluorescent-spectroscopic data. This technology is characterised by relatively low detection limits from up to 1.10{sup -6} M for uranium (VI) compounds within the confocal volume. (orig.)

  15. Application of a plasma-jet for skin antisepsis: analysis of the thermal action of the plasma by laser scanning microscopy

    Science.gov (United States)

    Lademann, O.; Richter, H.; Patzelt, A.; Alborova, A.; Humme, D.; Weltmann, K.-D.; Hartmann, B.; Hinz, P.; Kramer, A.; Koch, S.

    2010-06-01

    Recently, it was reported that a plasma-jet could be efficiently applied for the antisepsis of wounds. In this case, the discharge in an argon gas stream was used to produce a so-called ``cold plasma'' on the skin surface. The thermal action of the plasma on the skin was investigated in the present study by means of laser scanning microscopy (LSM) and by histological analysis. Consequently, the plasma beam was moved with a definite velocity at an optimal distance over the skin surface. The structural changes of the tissue were analyzed. It was found by LSM that a thermal damage could be detected only in the upper cell layers of the stratum corneum (SC) at moving velocities of the plasma beam, usually applied in clinical practice. Deeper parts of the SC were not damaged. The structural changes were so superficial that they could be detected only by LSM but not by analysis of the histological sections.

  16. Image processing for precise three-dimensional registration and stitching of thick high-resolution laser-scanning microscopy image stacks.

    Science.gov (United States)

    Murtin, Chloé; Frindel, Carole; Rousseau, David; Ito, Kei

    2017-11-08

    The possible depth of imaging of laser-scanning microscopy is limited not only by the working distances of objective lenses but also by image degradation caused by attenuation and diffraction of light passing through the specimen. To tackle this problem, one can either flip the sample to record images from both sides of the specimen or consecutively cut off shallow parts of the sample after taking serial images of certain thickness. Multiple image substacks acquired in these ways should be combined afterwards to generate a single stack. However, subtle movements of samples during image acquisition cause mismatch not only in the translation along x-, y-, and z-axes and rotation around z-axis but also tilting around x- and y-axes, making it difficult to register the substacks precisely. In this work, we developed a novel approach called 2D-SIFT-in-3D-Space using Scale Invariant Feature Transform (SIFT) to achieve robust three-dimensional matching of image substacks. Our method registers the substacks by separately fixing translation and rotation along x-, y-, and z-axes, through extraction and matching of stable features across two-dimensional sections of the 3D stacks. To validate the quality of registration, we developed a simulator of laser-scanning microscopy images to generate a virtual stack in which noise levels and rotation angles are controlled with known parameters. We illustrate quantitatively the performance of our approach by registering an entire brain of Drosophila melanogaster consisting of 800 sections. Our approach is also demonstrated to be extendable to other types of data that share large dimensions and need of fine registration of multiple image substacks. This method is implemented in Java and distributed as ImageJ/Fiji plugin. The source code is available via Github (http://www.creatis.insa-lyon.fr/site7/fr/MicroTools). Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Serial Sectioning Of Cells In Three Dimensions With Confocal Scanning Laser Fluorescence Microscopy (Fl-CSLM): Microtomoscopy

    Science.gov (United States)

    Stelzer, Ernst H.; Stricker, Reiner; Pick, Reinhard; Storz, Clemens; Wijnaendts-Van-Resandt, Roelof W.

    1988-06-01

    The discrimination of out of focus contributions in fluorescence microscopy possible in a confocal setup will establish itself as a supplement to conventional fluorescence microscopy. The improvement of the contrast compared with conventional fluorescence microscopy depends mainly on the density of the fluorescing material and the thickness of the sample. The term thickness, that which microscopists refer to as the size of the specimen along the optical axis, will gain a new quality since a confocal fluorescence microscope may reveal totally different features when recording data in planes that are 0.3μm apart. Differences that have in the past been neglected suddenly become important. The following article will outline important features in the application of confocal fluorescence microscopy in the biological sciences, point out its limitatk'ns, and draw attention to expected developments.

  18. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1995-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in STM I, these studies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described in chapters on scanning force microscopy, magnetic force microscopy, and scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Together, the two volumes give a comprehensive account of experimental aspects of STM. They provide essential reading and reference material for all students and researchers involved in this field. In this second edition the text has been updated and new methods are discussed.

  19. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1992-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in Vol. I, these sudies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described inchapters on scanning force microscopy, magnetic force microscopy, scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Togehter, the two volumes give a comprehensive account of experimental aspcets of STM. They provide essentialreading and reference material for all students and researchers involvedin this field.

  20. A video rate laser scanning confocal microscope

    Science.gov (United States)

    Ma, Hongzhou; Jiang, James; Ren, Hongwu; Cable, Alex E.

    2008-02-01

    A video-rate laser scanning microscope was developed as an imaging engine to integrate with other photonic building blocks to fulfill various microscopic imaging applications. The system is quipped with diode laser source, resonant scanner, galvo scanner, control electronic and computer loaded with data acquisition boards and imaging software. Based on an open frame design, the system can be combined with varies optics to perform the functions of fluorescence confocal microscopy, multi-photon microscopy and backscattering confocal microscopy. Mounted to the camera port, it allows a traditional microscope to obtain confocal images at video rate. In this paper, we will describe the design principle and demonstrate examples of applications.

  1. Introduction to scanning tunneling microscopy

    CERN Document Server

    Chen, C Julian

    2008-01-01

    The scanning tunneling and the atomic force microscope, both capable of imaging individual atoms, were crowned with the Physics Nobel Prize in 1986, and are the cornerstones of nanotechnology today. This is a thoroughly updated version of this 'bible' in the field.

  2. Scanning Electron Microscopy in modern dentistry research

    OpenAIRE

    Paradella, Thaís Cachuté; Unesp-FOSJC; Bottino, Marco Antonio; Unesp-FOSJC

    2012-01-01

    The purpose of this article was to review the usage of Scanning Electron Microscopy (SEM) in dentistry research nowadays, through a careful and updated literature review. By using the key-words Scanning Electron Microscopy and one of the following areas of research in dentistry (Endodontics, Periodontics and Implant), in international database (PubMed), in the year of 2012 (from January to September), a total of 112 articles were found. This data was tabled and the articles were classified ac...

  3. Differential-concentration scanning ion conductance microscopy

    OpenAIRE

    Perry, David; Page, Ashley; Chen, Baoping; Frenguelli, Bruno G.; Unwin, Patrick R.

    2017-01-01

    Scanning ion conductance microscopy (SICM) is a nanopipette-based scanning probe microscopy technique that utilizes the ionic current flowing between an electrode inserted inside a nanopipette probe containing electrolyte solution and a second electrode placed in a bulk electrolyte bath, to provide information on a substrate of interest. For most applications to date, the composition and concentration of the electrolyte inside and outside the nanopipette is identical, but it is shown herein t...

  4. Characterization of diatom-derived lipids and chlorophyll within Holocene laminites, Saanich Inlet, British Columbia, using conventional and laser scanning fluorescence microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Stasiuk, L.D. [Natural Resources Canada, Geological Survey of Canada, Calgary, AB (Canada); Sanei, H. [University of Victoria, BC (Canada). School of Earth and Ocean Sciences

    2001-07-01

    Conventional fluorescence microscopy and visible light region fluorescence microspectrometry have been combined with laser scanning fluorescence microscopy (LSFM) to examine and characterize soluble sedimentary organic matter (SOM) in Holocene diatomaceous laminites from ODP core 1034, Saanich Inlet, British Columbia, Canada. Microscopic SOM in the laminites is dominated by two components: red-fluorescing chlorophyllinite, and yellow-fluorescing, diatom-derived oils. Both are commonly preserved within the interior of siliceous diatom auxospores and appear as an abundant and intense stain on mineral matter throughout the laminites. The mineral stain is classified as matrix chlorophyllinite and matrix oil, respectively. Accessory insoluble SOM consists of dinoflagellate, prasinophyte and coccoidal alginites, and rare woody huminite, funginite, and sporinite. Visible light region fluorescence microspectrometry of chlorophyllinite reveals a predominance at {lambda} max 670-675 nm, which is consistent with a chlorophyll a source based on comparison with reference samples of chlorophyll a and b. The consistency in {lambda}max and spectral character of chlorophyllinite with increasing depth in Saanich Inlet correlates with a high degree of chlorophyll preservation. Its distribution in the laminites is readily imaged by LSFM using either UV (363 nm) or blue (488 nm) laser excitation and >665 nm emission. Yellow-fluorescing diatom oils have {lambda}max ranging from 485 to 520 nm, suggesting that they may comprise up to 70 per cent saturates. The distribution of entrapped yellow-fluorescing diatom oils as well as matrix oils is also readily imaged with LSFM using a combination of UV laser excitation (363 nm) and 510{+-}40 nm emission. Laminae on the Saanich Inlet samples which are highly enriched in both diatom oils and 'reproductive' auxospore cells are interpreted as recording intense episodic spring diatom blooms. The observations reported here document

  5. Towards high-speed scanning tunneling microscopy

    NARCIS (Netherlands)

    Tabak, Femke Chantal

    2013-01-01

    In this thesis, two routes towards high-speed scanning tunneling microscopy (STM) are described. The first possibility for high-speed scanning that is discussed is the use of MEMS (Micro-Electro Mechanical Systems) devices as high-speed add-ons in STM microscopes. The functionality of these devices

  6. Spiral scanning method for atomic force microscopy.

    Science.gov (United States)

    Hung, Shao-Kang

    2010-07-01

    A spiral scanning method is proposed for atomic force microscopy with thoroughgoing analysis and implementation. Comparing with the traditional line-by-line scanning method, the spiral scanning method demonstrates higher imaging speed, minor image distortion, and lower acceleration, which can damage the piezoelectric scanner. Employing the spiral scanning method to replace the line-by-line scanning method, the experiment shows that the time to complete an imaging cycle can be reduced from 800 s to 314 s without sacrificing the image resolution.

  7. Scanning electron microscopy of bone.

    Science.gov (United States)

    Boyde, Alan

    2012-01-01

    This chapter described methods for Scanning Electron Microscopical imaging of bone and bone cells. Backscattered electron (BSE) imaging is by far the most useful in the bone field, followed by secondary electrons (SE) and the energy dispersive X-ray (EDX) analytical modes. This chapter considers preparing and imaging samples of unembedded bone having 3D detail in a 3D surface, topography-free, polished or micromilled, resin-embedded block surfaces, and resin casts of space in bone matrix. The chapter considers methods for fixation, drying, looking at undersides of bone cells, and coating. Maceration with alkaline bacterial pronase, hypochlorite, hydrogen peroxide, and sodium or potassium hydroxide to remove cells and unmineralised matrix is described in detail. Attention is given especially to methods for 3D BSE SEM imaging of bone samples and recommendations for the types of resin embedding of bone for BSE imaging are given. Correlated confocal and SEM imaging of PMMA-embedded bone requires the use of glycerol to coverslip. Cathodoluminescence (CL) mode SEM imaging is an alternative for visualising fluorescent mineralising front labels such as calcein and tetracyclines. Making spatial casts from PMMA or other resin embedded samples is an important use of this material. Correlation with other imaging means, including microradiography and microtomography is important. Shipping wet bone samples between labs is best done in glycerol. Environmental SEM (ESEM, controlled vacuum mode) is valuable in eliminating -"charging" problems which are common with complex, cancellous bone samples.

  8. Comparative pattern of growth and development of Echinostoma paraensei (Digenea: Echinostomatidae) in hamster and Wistar rat using light and confocal laser scanning microscopy.

    Science.gov (United States)

    Souza, Joyce G R; Garcia, Juberlan S; Gomes, Ana Paula N; Machado-Silva, José Roberto; Maldonado, Arnaldo

    2017-12-01

    Echinostoma paraensei (Digenea: Echinostomatidae) lives in the duodenum and bile duct of rodents and is reported as a useful model for studies on the biology of flatworms. Here, we compared the growth and development of pre and post ovigerous worms collected 3, 7, 14 and 21 days post infection from experimentally infected hamster (permissive host) and Wistar rat (less permissive hosts). Linear measurements and ratios were examined by light (morphology and morphometry) and confocal laser scanning microscopy. At day 3, either worm from hamsters or rats were small with poorly developed gonads. At seven day, worms increased in size and morphometric differences between hosts are statistically significant after this time. In addition, adult worms (14 and 21 days of age) harvested from hamster showed developed gonads and vitelline glands laterally distributed on the body, whereas worms from rat showed atrophied reproductive system characterized by underdeveloped vitelline glands and stunted ovary. The worm rate recovery in rat decreased from 29.3% (day 7) to 20.6% (day 14) and 8% (day 21), whilst it remained around 37% in hamster. In conclusion, this is the first appointment demonstrating that low permissiveness influences the reproductive system of echinostome since the immature stages of development. The phenotypic analysis evidenced that hamster provides a more favorable microenvironment for gonads development than rat, confirming golden hamster as a permissive host, whereas Wistar rat is less permissive host. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Application of in vivo laser scanning confocal microscopy for evaluation of ocular surface diseases: lessons learned from pterygium, meibomian gland disease, and chemical burns.

    Science.gov (United States)

    Wang, Yan; Le, Qihua; Zhao, Feng; Hong, Jiaxu; Xu, Jianjiang; Zheng, Tianyu; Sun, Xinghuai

    2011-10-01

    In vivo laser scanning confocal microscopy (LSCM) has been widely used to evaluate the alterations caused by ocular surface diseases at a cellular level in the living eye. In this review, we focus on its use in the diagnosis of pterygium, meibomian gland (MG) disease, and chemical burns. Histopathologic changes occurring in pterygium can be examined in situ using in vivo LSCM. Alterations at the junction of the pterygium and the cornea, which cannot be observed in excised tissue samples, can be observed. MGs play an important role in maintaining the health of the ocular surface. Meibomian gland dysfunction (MGD) is one of the most common ocular surface diseases. The use of in vivo LSCM helps in the diagnosis of MGD and provides a way to examine the microstructure of MG acinar units and measure their size. In vivo LSCM also provides a new perspective in understanding the contribution of the MG to the health of the ocular surface. Chemical burns are one of the most common ocular injuries, and in vivo LSCM can provide images of the goblet cells on the corneal surface. This is a hallmark of limbal stem cell deficiency. The application of in vivo LSCM to assessing chemical burns requires extension, allowing for evaluation of the limbus structure and ocular surface changes after reconstructive ocular surgery.

  10. Biofilm formation on the Provox ActiValve: Composition and ingrowth analyzed by Illumina paired-end RNA sequencing, fluorescence in situ hybridization, and confocal laser scanning microscopy.

    Science.gov (United States)

    Timmermans, Adriana J; Harmsen, Hermie J M; Bus-Spoor, Carien; Buijssen, Kevin J D A; van As-Brooks, Corina; de Goffau, Marcus C; Tonk, Rudi H; van den Brekel, Michiel W M; Hilgers, Frans J M; van der Laan, Bernard F A M

    2016-04-01

    The most frequent cause of voice prosthesis failure is microbial biofilm formation on the silicone valve, leading to destruction of the material and transprosthetic leakage. The Provox ActiValve valve is made of fluoroplastic, which should be insusceptible to destruction. The purpose of this study was to determine if fluoroplastic is insusceptible to destruction by Candida species. Thirty-three dysfunctional Provox ActiValves (collected 2011-2013). Biofilm analysis was performed with Illumina paired-end sequencing (IPES), assessment of biofilm-material interaction with fluorescence in situ hybridization (FISH), and confocal laser scanning microscopy (CLSM). IPES (n = 10) showed that Candida albicans and Candida tropicalis are dominant populations on fluoroplastic and silicone. Microbial diversity is significantly lower on fluoroplastic. Lactobacillus gasseri is the prevalent bacterial strain on most voice prostheses. FISH and CLSM (n = 23): in none of the cases was ingrowth of Candida species present in the fluoroplastic. Fluoroplastic material of Provox ActiValve seems insusceptible to destruction by Candida species, which could help improve durability of voice prostheses. © 2015 Wiley Periodicals, Inc. Head Neck 38: E432-E440, 2016. © 2015 Wiley Periodicals, Inc.

  11. In situ identification of streptococci and other bacteria in initial dental biofilm by confocal laser scanning microscopy and fluorescence in situ hybridization.

    Science.gov (United States)

    Dige, Irene; Nilsson, Holger; Kilian, Mogens; Nyvad, Bente

    2007-12-01

    Confocal laser scanning microscopy (CLSM) has been employed as a method for studying intact natural biofilm. When combined with fluorescence in situ hybridization (FISH) it is possible to analyze spatial relationships and changes of specific members of microbial populations over time. The aim of this study was to perform a systematic description of the pattern of initial dental biofilm formation by applying 16S rRNA-targeted oligonucleotide probes to the identification of streptococci and other bacteria, and to evaluate the usefulness of the combination of CLSM and FISH for structural studies of bacterial populations in dental biofilm. Biofilms were collected on standardized glass slabs mounted in intra-oral appliances and worn by 10 individuals for 6, 12, 24 or 48 h. After intra-oral exposure the biofilms were labelled with probes against either streptococci (STR405) or all bacteria (EUB338) and analysed by CLSM. The current approach of using FISH techniques enabled differentiation of streptococci from other bacteria and determination of their spatio-temporal organization. The presence of chimney-like multilayered microcolonies with different microbial compositions demonstrated by this methodology provided information supplementary to our previous knowledge obtained by classical electron microscopic methods and increased our understanding of the structure of developing biofilms.

  12. The determination of firing distance applying a microscopic quantitative method and confocal laser scanning microscopy for detection of gunshot residue particles.

    Science.gov (United States)

    Neri, Margherita; Turillazzi, Emanuela; Riezzo, Irene; Fineschi, Vittorio

    2007-07-01

    In this study, we applied a microscopic quantitative method based on the use of sodium rhodizonate to verify the presence of residues and their distribution on the cutis of gunshot wounds. A total of 250 skin samples were selected from cases in which the manner of death (accidental, suicide, and homicide) and the shooting distance could be reliably determined. The samples were examined under a light microscope, in transmitted bright field illumination and phase contrast mode, and with confocal laser scanning microscopy. In all skin specimens the area of each histological section was directly measured by an image analysis system. Both the number and the size of powder particles were measured. The distribution of gunshot residues (GSR) in the epidermal and subepidermal layers was also analyzed. The evaluation of the microscopic entrance wounds demonstrated different findings related to the range of fire. The data derived from the evaluation of both macroscopic and microscopic features demonstrated that the amount and the spatial distribution of GSR deposits in the skin surrounding entrance wounds strictly correlate with shooting distance.

  13. Morphological aspects of Schistosoma mansoni adult worms isolated from nourished and undernourished mice: a comparative analysis by confocal laser scanning microscopy

    Directory of Open Access Journals (Sweden)

    Neves Renata Heisler

    2001-01-01

    Full Text Available Malnutrition hampers the course of schistosomiasis mansoni infection just as normal growth of adult worms. A comparative morphometric study on adult specimens (male and female recovered from undernourished (fed with a low protein diet - regional basic diet and nourished (rodent commercial laboratory food, NUVILAB white mice was performed. Tomographic images and morphometric analysis of the oral and ventral suckers, reproductive system and tegument were obtained by means of confocal laser scanning microscopy. Undernourished male specimens presented smaller morphometric values (length and width of the reproductive system (first, third and last testicular lobes and thickness of the tegument than controls. Besides that, it was demonstrated that the dorsal surface of the male worms bears large tubercles unevenly distributed, but kept grouped and flat. At the subtegumental region, vacuolated areas were detected. It was concluded that the inadequate nutritional status of the vertebrate host has a negative influence mainly in the reproductive system and topographical somatic development of male adult Schistosoma mansoni, inducing some alterations on the structure of the parasite.

  14. A new improved protocol for in vitro intratubular dentinal bacterial contamination for antimicrobial endodontic tests: standardization and validation by confocal laser scanning microscopy

    Directory of Open Access Journals (Sweden)

    Flaviana Bombarda de ANDRADE

    2015-01-01

    Full Text Available Objectives To compare three methods of intratubular contamination that simulate endodontic infections using confocal laser scanning microscopy (CLSM. Material and Methods Two pre-existing models of dentinal contamination were used to induce intratubular infection (groups A and B. These methods were modified in an attempt to improve the model (group C. Among the modifications it may be included: specimen contamination for five days, ultrasonic bath with BHI broth after specimen sterilization, use of E. faecalis during the exponential growth phase, greater concentration of inoculum, and two cycles of centrifugation on alternate days with changes of culture media. All specimens were longitudinally sectioned and stained with of LIVE/DEAD® for 20 min. Specimens were assessed using CLSM, which provided images of the depth of viable bacterial proliferation inside the dentinal tubules. Additionally, three examiners used scores to classify the CLSM images according to the following parameters: homogeneity, density, and depth of the bacterial contamination inside the dentinal tubules. Kruskal-Wallis and Dunn’s tests were used to evaluate the live and dead cells rates, and the scores obtained. Results The contamination scores revealed higher contamination levels in group C when compared with groups A and B (p0.05. The volume of live cells in group C was higher than in groups A and B (p<0.05. Conclusion The new protocol for intratubular infection resulted in high and uniform patterns of bacterial contamination and higher cell viability in all specimens when compared with the current methods.

  15. Laser-Combined Scanning Tunneling Microscopy on the Carrier Dynamics in Low-Temperature-Grown GaAs/AlGaAs/GaAs

    Directory of Open Access Journals (Sweden)

    Yasuhiko Terada

    2011-01-01

    Full Text Available We investigated carrier recombination dynamics in a low-temperature-grown GaAs (LT-GaAs/AlGaAs/GaAs heterostructure by laser-combined scanning tunneling microscopy, shaken-pulse-pair-excited STM (SPPX-STM. With the AlGaAs interlayer as a barrier against the flow of photocarriers, recombination lifetimes in LT-GaAs of 4.0 ps and GaAs of 4.8 ns were successfully observed separately. We directly demonstrated the high temporal resolution of SPPX-STM by showing the recombination lifetime of carriers in LT-GaAs (4.0 ps in the range of subpicosecond temporal resolution. In the carrier-lifetime-mapping measurement, a blurring of recombination lifetime up to 50 nm was observed at the LT-GaAs/AlGaAs boundary, which was discussed in consideration of the screening length of the electric field from the STM probe. The effect of the built-in potential on the signal, caused by the existence of LT-GaAs/AlGaAs/GaAs boundaries, was discussed in detail.

  16. Comparison of fungiform taste-bud distribution among age groups using confocal laser scanning microscopy in vivo in combination with gustatory function.

    Science.gov (United States)

    Saito, Takehisa; Ito, Tetsufumi; Ito, Yumi; Manabe, Yasuhiro; Sano, Kazuo

    2016-04-01

    The aim of this study was to compare the distribution of taste buds in fungiform papillae (FP) and gustatory function between young and elderly age groups. Confocal laser scanning microscopy was used because it allows many FP to be observed non-invasively in a short period of time. The age of participants (n = 211) varied from 20 to 83 yr. The tip and midlateral region of the tongue were observed. Taste buds in an average of 10 FP in each area were counted. A total of 2,350 FP at the tongue tip and 2,592 FP in the midlateral region could be observed. The average number of taste buds was similar among all age groups both at the tongue tip and in the midlateral region. The taste function, measured by electrogustometry, among participants 20-29 yr of age was significantly lower than that in the other age groups; however, there was no difference among any other age groups in taste function. These results indicate that the peripheral gustatory system is well maintained anatomically and functionally in elderly people. © 2016 Eur J Oral Sci.

  17. Reproductive system abnormalities in Schistosoma mansoni adult worms isolated from Nectomys squamipes (Muridae: Sigmodontinae: brightfield and confocal laser scanning microscopy analysis

    Directory of Open Access Journals (Sweden)

    Neves Renata Heisler

    2003-01-01

    Full Text Available Schistosoma mansoni adult worms with genital anomalies isolated from Nectomys squamipes (Muridae: Sigmodontinae were studied by confocal laser scanning microscopy under the reflected mode. One male without testicular lobes (testicular agenesia/anorchism and two females, one with an atrophied ovary and another with 17 uterine eggs, were identified. The absence of testicular lobes occurred in a worm presenting otherwise normal male adult characteristics: tegument, tubercles and a gynaecophoric canal with spines. In both female specimens the digestive tube showed a vacuolated appearance, and the specimen with supernumerary uterine eggs exhibited a developing miracidium and an egg with a formed shell. The area of the ventral sucker was similar in both specimens however the tegument thickness, ovary and vitelline glands of the specimen with the atrophied ovary were smaller than those of the one with supernumerary eggs. These reported anomalies in the reproductive system call attention to the need to improve our understanding of genetic regulation and the possible role of environmental influences upon trematode development.

  18. Novel application of confocal laser scanning microscopy and 3D volume rendering toward improving the resolution of the fossil record of charcoal.

    Directory of Open Access Journals (Sweden)

    Claire M Belcher

    Full Text Available Variations in the abundance of fossil charcoals between rocks and sediments are assumed to reflect changes in fire activity in Earth's past. These variations in fire activity are often considered to be in response to environmental, ecological or climatic changes. The role that fire plays in feedbacks to such changes is becoming increasingly important to understand and highlights the need to create robust estimates of variations in fossil charcoal abundance. The majority of charcoal based fire reconstructions quantify the abundance of charcoal particles and do not consider the changes in the morphology of the individual particles that may have occurred due to fragmentation as part of their transport history. We have developed a novel application of confocal laser scanning microscopy coupled to image processing that enables the 3-dimensional reconstruction of individual charcoal particles. This method is able to measure the volume of both microfossil and mesofossil charcoal particles and allows the abundance of charcoal in a sample to be expressed as total volume of charcoal. The method further measures particle surface area and shape allowing both relationships between different size and shape metrics to be analysed and full consideration of variations in particle size and size sorting between different samples to be studied. We believe application of this new imaging approach could allow significant improvement in our ability to estimate variations in past fire activity using fossil charcoals.

  19. Investigation of the cutaneous penetration behavior of dexamethasone loaded to nano-sized lipid particles by EPR spectroscopy, and confocal Raman and laser scanning microscopy.

    Science.gov (United States)

    Lohan, Silke B; Saeidpour, Siavash; Solik, Agnieszka; Schanzer, Sabine; Richter, Heike; Dong, Pin; Darvin, Maxim E; Bodmeier, Roland; Patzelt, Alexa; Zoubari, Gaith; Unbehauen, Michael; Haag, Rainer; Lademann, Jürgen; Teutloff, Christian; Bittl, Robert; Meinke, Martina C

    2017-07-01

    An improvement of the penetration efficiency combined with the controlled release of actives in the skin can facilitate the medical treatment of skin diseases immensely. Dexamethasone (Dx), a synthetic glucocorticoid, is frequently used for the treatment of inflammatory skin diseases. To investigate the penetration of nano-sized lipid particles (NLP) loaded with Dx in comparison to a commercially available base cream, different techniques were applied. Electron paramagnetic resonance (EPR) spectroscopy was used to monitor the penetration of Dx, which was covalently labeled with the spin probe 3-(Carboxy)-2,2,5,5-tetramethyl-1-pyrrolidinyloxy (PCA). The penetration into hair follicles was studied using confocal laser scanning microscopy (CLSM) with curcumin-loaded NLP. The penetration of the vehicle was followed by confocal Raman microscopy (CRM). Penetration studies using excised porcine skin revealed a more than twofold higher penetration efficiency for DxPCA into the stratum corneum (SC) after 24h incubation compared to 4h incubation when loaded to the NLP, whereas when applied in the base cream, almost no further penetration was observed beyond 4h. The distribution of DxPCA within the SC was investigated by consecutive tape stripping. The release of DxPCA from the base cream after 24h in deeper SC layers and the viable epidermis was shown by EPR. For NLP, no release from the carrier was observed, although DxPCA was detectable in the skin after the complete SC was removed. This phenomenon can be explained by the penetration of the NLP into the hair follicles. However, penetration profiles measured by CRM indicate that NLP did not penetrate as deeply into the SC as the base cream formulation. In conclusion, NLP can improve the accumulation of Dx in the skin and provide a reservoir within the SC and in the follicular infundibula. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Characterization of toners and inkjets by laser ablation spectrochemical methods and Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Trejos, Tatiana, E-mail: trejost@fiu.edu; Corzo, Ruthmara, E-mail: rcorz001@fiu.edu; Subedi, Kiran, E-mail: ksube001@fiu.edu; Almirall, José, E-mail: almirall@fiu.edu

    2014-02-01

    Detection and sourcing of counterfeit currency, examination of counterfeit security documents and determination of authenticity of medical records are examples of common forensic document investigations. In these cases, the physical and chemical composition of the ink entries can provide important information for the assessment of the authenticity of the document or for making inferences about common source. Previous results reported by our group have demonstrated that elemental analysis, using either Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) or Laser Ablation Induced Breakdown Spectroscopy (LIBS), provides an effective, practical and robust technique for the discrimination of document substrates and writing inks with minimal damage to the document. In this study, laser-based methods and Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS) methods were developed, optimized and validated for the forensic analysis of more complex inks such as toners and inkjets, to determine if their elemental composition can differentiate documents printed from different sources and to associate documents that originated from the same printing source. Comparison of the performance of each of these methods is presented, including the analytical figures of merit, discrimination capability and error rates. Different calibration strategies resulting in semi-quantitative and qualitative analysis, comparison methods (match criteria) and data analysis and interpretation tools were also developed. A total of 27 black laser toners originating from different manufacturing sources and/or batches were examined to evaluate the discrimination capability of each method. The results suggest that SEM-EDS offers relatively poor discrimination capability for this set (∼ 70.7% discrimination of all the possible comparison pairs or a 29.3% type II error rate). Nonetheless, SEM-EDS can still be used as a complementary method of analysis since it has

  1. Hyperchromatic laser scanning cytometry

    Science.gov (United States)

    Tárnok, Attila; Mittag, Anja

    2007-02-01

    In the emerging fields of high-content and high-throughput single cell analysis for Systems Biology and Cytomics multi- and polychromatic analysis of biological specimens has become increasingly important. Combining different technologies and staining methods polychromatic analysis (i.e. using 8 or more fluorescent colors at a time) can be pushed forward to measure anything stainable in a cell, an approach termed hyperchromatic cytometry. For cytometric cell analysis microscope based Slide Based Cytometry (SBC) technologies are ideal as, unlike flow cytometry, they are non-consumptive, i.e. the analyzed sample is fixed on the slide. Based on the feature of relocation identical cells can be subsequently reanalyzed. In this manner data on the single cell level after manipulation steps can be collected. In this overview various components for hyperchromatic cytometry are demonstrated for a SBC instrument, the Laser Scanning Cytometer (Compucyte Corp., Cambridge, MA): 1) polychromatic cytometry, 2) iterative restaining (using the same fluorochrome for restaining and subsequent reanalysis), 3) differential photobleaching (differentiating fluorochromes by their different photostability), 4) photoactivation (activating fluorescent nanoparticles or photocaged dyes), and 5) photodestruction (destruction of FRET dyes). With the intelligent combination of several of these techniques hyperchromatic cytometry allows to quantify and analyze virtually all components of relevance on the identical cell. The combination of high-throughput and high-content SBC analysis with high-resolution confocal imaging allows clear verification of phenotypically distinct subpopulations of cells with structural information. The information gained per specimen is only limited by the number of available antibodies and by sterical hindrance.

  2. A Comparison of Er:YAG Laser with Photon-Initiated Photoacoustic Streaming, Nd:YAG Laser, and Conventional Irrigation on the Eradication of Root Dentinal Tubule Infection by Enterococcus faecalis Biofilms: A Scanning Electron Microscopy Study

    Directory of Open Access Journals (Sweden)

    Burcu Ozses Ozkaya

    2017-01-01

    Full Text Available This study evaluated the antimicrobial efficacy of Er:YAG laser activation with photon-initiated photoacoustic streaming (PIPS, Nd:YAG laser disinfection, and conventional irrigation on Enterococcus faecalis biofilms using scanning electron microscopy (SEM. Biofilms were grown on 110 root halves and divided into the following: Groups 1 and 2 (saline and 1% NaOCl with apical position of PIPS, resp., Groups 3 and 4 (saline and 1% NaOCl with coronal position of PIPS, resp., Groups 5 and 6 (Nd:YAG laser after saline and 1% NaOCl irrigation, resp. and Groups 7, 8, and 9 (conventional irrigation with 1% NaOCl, 6% NaOCl, and saline, resp.. SEM images of the apical, middle, and coronal levels were examined using a scoring system. Score differences between Groups 1 and 2 were insignificant at all levels in the remaining biofilm. Group 4 had significantly greater bacterial elimination than Group 3 at all levels. Differences in Nd:YAG laser irradiation between Groups 5 and 6 were insignificant. Groups 7 and 8 were insignificantly different, except at the middle level. Saline group had a higher percentage of biofilms than the others. In this study, PIPS activation with NaOCl eliminates more E. faecalis biofilms in all root canals regardless of the position of the fiber tip.

  3. In situ observation of the growth of biofouling layer in osmotic membrane bioreactors by multiple fluorescence labeling and confocal laser scanning microscopy.

    Science.gov (United States)

    Yuan, Bo; Wang, Xinhua; Tang, Chuyang; Li, Xiufen; Yu, Guanghui

    2015-05-15

    Since the concept of the osmotic membrane bioreactor (OMBR) was introduced in 2008, it has attracted growing interests for its potential applications in wastewater treatment and reclamation; however, the fouling mechanisms of forward osmosis (FO) membrane especially the development of biofouling layer in the OMBR are not yet clear. Here, the fouled FO membranes were obtained from the OMBRs on days 3, 8 and 25 in sequence, and then the structure and growing rule of the biofouling layer formed on the FO membrane samples were in-situ characterized by multiple fluorescence labeling and confocal laser scanning microscopy (CLSM). CLSM images indicated that the variations in abundance and distribution of polysaccharides, proteins and microorganisms in the biofouling layer during the operation of OMBRs were significantly different. Before the 8th day, their biovolume dramatically increased. Subsequently, the biovolumes of β-d-glucopyranose polysaccharides and proteins continued increasing and leveled off after 8 days, respectively, while the biovolumes of α-d-glucopyranose polysaccharides and microorganisms decreased. Extracellular polymeric substances (EPS) played a significant role in the formation and growth of biofouling layer, while the microorganisms were seldom detected on the upper fouling layer after 3 days. Based on the results obtained in this study, the growth of biofouling layer on the FO membrane surface in the OMBR could be divided into three stages. Initially, EPS was firstly deposited on the FO membrane surface, and then microorganisms associated with EPS located in the initial depositing layer to form clusters. After that, the dramatic increase of the clusters of EPS and microorganisms resulted in the quick growth of biofouling layer during the flux decline of the OMBR. However, when the water flux became stable in the OMBR, some microorganisms and EPS would be detached from the FO membrane surface. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Analysis by confocal laser scanning microscopy of the MDPB bactericidal effect on S. mutans biofilm CLSM analysis of MDPB bactericidal effect on biofilm

    Directory of Open Access Journals (Sweden)

    Fabíola Galbiatti de Carvalho

    2012-10-01

    Full Text Available Since bacteria remain in the dentin following caries removal, restorative materials with antibacterial properties are desirable to help maintaining the residual microorganisms inactive. The adhesive system Clearfil Protect Bond (PB contains the antibacterial monomer 12-methacryloyloxydodecylpyridinium bromide (MDPB in its primer, which has shown antimicrobial activity. However, its bactericidal effect against biofilm on the dentin has been little investigated. Objective: The aim of this study was to analyze by confocal laser scanning microscopy (CLSM and viable bacteria counting (CFU the MDPB bactericidal effect against S. mutans biofilm on the dentin surface. Material and methods: Bovine dentin surfaces were obtained and subjected to S. mutans biofilm formation in BHI broth supplemented with 1% (w/v sucrose for 18 h. Samples were divided into three groups, according to the primer application (n=3: Clearfil Protect Bond (PB, Clearfil SE Bond, which does not contain MDPB, (SE and saline (control group. After the biofilm formation, Live/ Dead stain was applied directly to the surface of each sample. Next, 10 µL of each primer were applied on the samples during 590 s for the real-time CLSM analysis. The experiment was conducted in triplicate. The primers and saline were also applied on the other dentin samples during 20, 90, 300 and 590 s (n=9 for each group and period evaluated and the CFU were assessed by colonies counting. Results: The results of the CLSM showed that with the Se application, although non-viable bacteria were detected at 20 s, there was no increase in their count during 590 s. In contrast, after the PB application there was a gradual increase of non-viable bacteria over 590 s. Conclusions: The quantitative analysis demonstrated a significant decrease of S. mutans CFU at 90 s PB exposure and only after 300 s of Se application. Protect Bond showed an earlier antibacterial effect than Se Bond.

  5. Semiconductor Surface Characterization by Scanning Probe Microscopies

    Science.gov (United States)

    2001-01-01

    potentiometry (STP)8 and ballistic electron emission microscopy (BEEM)9 which allow mapping of lateral surface potential and local subsurface Schottky...A.P.Fein. "Tunneling Spectroscopy of the Si(1 1 1)2xl Surface", Surf.Sci. 181, 295- 306, 1987. 8. P.Muralt, D.W.Pohl, "Scanning tunneling potentiometry

  6. Scanning electron microscopy study of Trichomonas gallinae.

    Science.gov (United States)

    Tasca, Tiana; De Carli, Geraldo A

    2003-12-01

    A scanning electron microscopy (SEM) study of Trichomonas gallinae (Rivolta, 1878), provided more information about the morphology of this flagellated protozoan. SEM showed the morphological features of the trophozoites; the emergence of the anterior flagella, the structure of the undulating membrane, the position and shape of the pelta, axostyle and posterior flagellum. Of special interest were the pseudocyst forms.

  7. Aberration corrected Lorentz scanning transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    McVitie, S., E-mail: stephen.mcvitie@glasgow.ac.uk; McGrouther, D.; McFadzean, S.; MacLaren, D.A.; O’Shea, K.J.; Benitez, M.J.

    2015-05-15

    We present results from an aberration corrected scanning transmission electron microscope which has been customised for high resolution quantitative Lorentz microscopy with the sample located in a magnetic field free or low field environment. We discuss the innovations in microscope instrumentation and additional hardware that underpin the imaging improvements in resolution and detection with a focus on developments in differential phase contrast microscopy. Examples from materials possessing nanometre scale variations in magnetisation illustrate the potential for aberration corrected Lorentz imaging as a tool to further our understanding of magnetism on this lengthscale. - Highlights: • Demonstration of nanometre scale resolution in magnetic field free environment using aberration correction in the scanning transmission electron microscope (STEM). • Implementation of differential phase contrast mode of Lorentz microscopy in aberration corrected STEM with improved sensitivity. • Quantitative imaging of magnetic induction of nanostructures in amorphous and cross-section samples.

  8. Scanning Ion Conductance Microscopy of Live Keratinocytes

    Science.gov (United States)

    Hegde, V.; Mason, A.; Saliev, T.; Smith, F. J. D.; McLean, W. H. I.; Campbell, P. A.

    2012-07-01

    Scanning ion conductance microscopy (SICM) is perhaps the least well known technique from the scanning probe microscopy (SPM) family of instruments. As with its more familiar counterpart, atomic force microscopy (AFM), the technique provides high-resolution topographic imaging, with the caveat that target structures must be immersed in a conducting solution so that a controllable ion current may be utilised as the basis for feedback. In operation, this non-contact characteristic of SICM makes it ideal for the study of delicate structures, such as live cells. Moreover, the intrinsic architecture of the instrument, incorporating as it does, a scanned micropipette, lends itself to combination approaches with complementary techniques such as patch-clamp electrophysiology: SICM therefore boasts the capability for both structural and functional imaging. For the present observations, an ICnano S system (Ionscope Ltd., Melbourn, UK) operating in 'hopping mode' was used, with the objective of assessing the instrument's utility for imaging live keratinocytes under physiological buffers. In scans employing cultured HaCaT cells (spontaneously immortalised, human keratinocytes), we compared the qualitative differences of live cells imaged with SICM and AFM, and also with their respective counterparts after chemical fixation in 4% paraformaldehyde. Characteristic surface microvilli were particularly prominent in live cell imaging by SICM. Moreover, time lapse SICM imaging on live cells revealed that changes in the pattern of microvilli could be tracked over time. By comparison, AFM imaging on live cells, even at very low contact forces (monitoring the most delicate living structures with attendant high spatial resolutions.

  9. Analysing magnetism using scanning SQUID microscopy.

    Science.gov (United States)

    Reith, P; Renshaw Wang, X; Hilgenkamp, H

    2017-12-01

    Scanning superconducting quantum interference device microscopy (SSM) is a scanning probe technique that images local magnetic flux, which allows for mapping of magnetic fields with high field and spatial accuracy. Many studies involving SSM have been published in the last few decades, using SSM to make qualitative statements about magnetism. However, quantitative analysis using SSM has received less attention. In this work, we discuss several aspects of interpreting SSM images and methods to improve quantitative analysis. First, we analyse the spatial resolution and how it depends on several factors. Second, we discuss the analysis of SSM scans and the information obtained from the SSM data. Using simulations, we show how signals evolve as a function of changing scan height, SQUID loop size, magnetization strength, and orientation. We also investigated 2-dimensional autocorrelation analysis to extract information about the size, shape, and symmetry of magnetic features. Finally, we provide an outlook on possible future applications and improvements.

  10. Microstructure and properties of laser clad coatings studied by orientation imaging microscopy

    NARCIS (Netherlands)

    Ocelik, V.; Furar, I.; De Hosson, J. Th. M.

    2010-01-01

    In this work orientation imaging microscopy (OIM), based on electron backscatter diffraction in scanning electron microscopy, was employed to examine in detail the relationship between laser cladding processing parameters and he properties and the microstructure of single and overlapping laser

  11. Scanning electron microscopy of superficial white onychomycosis*

    Science.gov (United States)

    de Almeida Jr., Hiram Larangeira; Boabaid, Roberta Oliveira; Timm, Vitor; Silva, Ricardo Marques e; de Castro, Luis Antonio Suita

    2015-01-01

    Superficial white onychomycosis is characterized by opaque, friable, whitish superficial spots on the nail plate. We examined an affected halux nail of a 20-year-old male patient with scanning electron microscopy. The mycological examination isolated Trichophyton mentagrophytes. Abundant hyphae with the formation of arthrospores were found on the nail's surface, forming small fungal colonies. These findings showed the great capacity for dissemination of this form of onychomycosis. PMID:26560225

  12. Scanning electron microscopy of molluscum contagiosum*

    OpenAIRE

    Almeida Jr,Hiram Larangeira de; Abuchaim,Martha Oliveira; Schneide, Maiko Abel; Marques, Leandra; Castro, Luis Antônio Suíta de

    2013-01-01

    Molluscum contagiosum is a disease caused by a poxvirus. It is more prevalent in children up to 5 years of age. There is a second peak of incidence in young adults. In order to examine its ultrastructure, three lesions were curetted without disruption, cut transversely with a scalpel, and routinely processed for scanning electron microscopy (SEM). The oval structure of molluscum contagiosum could be easily identified. In its core, there was a central umbilication and just below this depressio...

  13. Scanning electron microscopy of cold gases

    Science.gov (United States)

    Santra, Bodhaditya; Ott, Herwig

    2015-06-01

    Ultracold quantum gases offer unique possibilities to study interacting many-body quantum systems. Probing and manipulating such systems with ever increasing degree of control requires novel experimental techniques. Scanning electron microscopy is a high resolution technique which can be used for in situ imaging, single site addressing in optical lattices and precision density engineering. Here, we review recent advances and achievements obtained with this technique and discuss future perspectives.

  14. Investigation into scanning tunnelling luminescence microscopy

    CERN Document Server

    Manson-Smith, S K

    2001-01-01

    This work reports on the development of a scanning tunnelling luminescence (STL) microscope and its application to the study of Ill-nitride semiconductor materials used in the production of light emitting devices. STL microscopy is a technique which uses the high resolution topographic imaging capabilities of the scanning tunnelling microscope (STM) to generate high resolution luminescence images. The STM tunnelling current acts as a highly localised source of electrons (or holes) which generates luminescence in certain materials. Light generated at the STM tunnelling junction is collected concurrently with the height variation of the tunnelling probe as it is scanned across a sample surface, producing simultaneous topographic and luminescence images. Due to the very localised excitation source, high resolution luminescence images can be obtained. Spectroscopic resolution can be obtained by using filters. Additionally, the variation of luminescence intensity with tunnel current and with bias voltage can provi...

  15. Interferometric Synthetic Aperture Microscopy: Computed Imaging for Scanned Coherent Microscopy

    Directory of Open Access Journals (Sweden)

    Stephen A. Boppart

    2008-06-01

    Full Text Available Three-dimensional image formation in microscopy is greatly enhanced by the use of computed imaging techniques. In particular, Interferometric Synthetic Aperture Microscopy (ISAM allows the removal of out-of-focus blur in broadband, coherent microscopy. Earlier methods, such as optical coherence tomography (OCT, utilize interferometric ranging, but do not apply computed imaging methods and therefore must scan the focal depth to acquire extended volumetric images. ISAM removes the need to scan the focus by allowing volumetric image reconstruction from data collected at a single focal depth. ISAM signal processing techniques are similar to the Fourier migration methods of seismology and the Fourier reconstruction methods of Synthetic Aperture Radar (SAR. In this article ISAM is described and the close ties between ISAM and SAR are explored. ISAM and a simple strip-map SAR system are placed in a common mathematical framework and compared to OCT and radar respectively. This article is intended to serve as a review of ISAM, and will be especially useful to readers with a background in SAR.

  16. Scanning Probe Microscopy of Organic Solar Cells

    Science.gov (United States)

    Reid, Obadiah G.

    Nanostructured composites of organic semiconductors are a promising class of materials for the manufacture of low-cost solar cells. Understanding how the nanoscale morphology of these materials affects their efficiency as solar energy harvesters is crucial to their eventual potential for large-scale deployment for primary power generation. In this thesis we describe the use of optoelectronic scanning-probe based microscopy methods to study this efficiency-structure relationship with nanoscale resolution. In particular, our objective is to make spatially resolved measurements of each step in the power conversion process from photons to an electric current, including charge generation, transport, and recombination processes, and correlate them with local device structure. We have achieved two aims in this work: first, to develop and apply novel electrically sensitive scanning probe microscopy experiments to study the optoelectronic materials and processes discussed above; and second, to deepen our understanding of the physics underpinning our experimental techniques. In the first case, we have applied conductive-, and photoconductive atomic force (cAFM & pcAFM) microscopy to measure both local photocurrent collection and dark charge transport properties in a variety of model and novel organic solar cell composites, including polymer/fullerene blends, and polymer-nanowire/fullerene blends, finding that local heterogeneity is the rule, and that improvements in the uniformity of specific beneficial nanostructures could lead to large increases in efficiency. We have used scanning Kelvin probe microscopy (SKPM) and time resolved-electrostatic force microscopy (trEFM) to characterize all-polymer blends, quantifying their sensitivity to photochemical degradation and the subsequent formation of local charge traps. We find that while trEFM provides a sensitive measure of local quantum efficiency, SKPM is generally unsuited to measurements of efficiency, less sensitive than tr

  17. Irradiation of root cervical dentin by using the Nd:YAG laser in vitro study and scanning electron microscopy; Irradiacao de dentina cervical radicular com laser de Nd:YAG - estudo in vitro e microscopia eletronica de varredura

    Energy Technology Data Exchange (ETDEWEB)

    Britto, Cynthia Tannure Coelho

    2003-07-01

    The dentin hypersensitivity occurs as a result of the dentine exposition to the oral environment, due to loss or removal of enamel or cementum, or both. The hypersensitivity can persist, unless the sealing of the dentin tubules be carried out. Several treatments have been considered, but with less satisfactory and only temporary results. Among these treatments we can cite methods that promote the mechanical occlusion by deposition of substances inside of tubules, by topic application. Nowadays, among the treatments studied, there is the use of lasers, which leads to better clinical efficiency by promoting fusion and re-solidification of the dentin surface, obliterating total or partially the dentin tubules. This in-vitro study was carried out in order to evaluate the efficiency of the Nd:YAG laser in promoting the fusion and re-solidification of the dentin surface, and to evaluate parameters of irradiation typically used, comparing results using photoinitiator with those without it. By observation of the dentin surface, using Scanning Electron Microscopy, it was found extensive areas of fusion and re-solidification, in those groups with photoinitiator, being this technique an efficient resource in the treatment of the dentin hypersensitivity. (author)

  18. Chemical Phenomena of Atomic Force Microscopy Scanning.

    Science.gov (United States)

    Ievlev, Anton V; Brown, Chance; Burch, Matthew J; Agar, Joshua C; Velarde, Gabriel A; Martin, Lane W; Maksymovych, Petro; Kalinin, Sergei V; Ovchinnikova, Olga S

    2018-02-12

    Atomic force microscopy is widely used for nanoscale characterization of materials by scientists worldwide. The long-held belief of ambient AFM is that the tip is generally chemically inert but can be functionalized with respect to the studied sample. This implies that basic imaging and scanning procedures do not affect surface and bulk chemistry of the studied sample. However, an in-depth study of the confined chemical processes taking place at the tip-surface junction and the associated chemical changes to the material surface have been missing as of now. Here, we used a hybrid system that combines time-of-flight secondary ion mass spectrometry with an atomic force microscopy to investigate the chemical interactions that take place at the tip-surface junction. Investigations showed that even basic contact mode AFM scanning is able to modify the surface of the studied sample. In particular, we found that the silicone oils deposited from the AFM tip into the scanned regions and spread to distances exceeding 15 μm from the tip. These oils were determined to come from standard gel boxes used for the storage of the tips. The explored phenomena are important for interpreting and understanding results of AFM mechanical and electrical studies relying on the state of the tip-surface junction.

  19. Time-Lapse Förster Resonance Energy Transfer Imaging by Confocal Laser Scanning Microscopy for Analyzing Dynamic Molecular Interactions in the Plasma Membrane of B Cells.

    Science.gov (United States)

    Sohn, Hae Won; Brzostowski, Joseph

    2018-01-01

    For decades, various Förster resonance energy transfer (FRET) techniques have been developed to measure the distance between interacting molecules. FRET imaging by the sensitized acceptor emission method has been widely applied to study the dynamical association between two molecules at a nanometer scale in live cells. Here, we provide a detailed protocol for FRET imaging by sensitized emission using a confocal laser scanning microscope to analyze the interaction of the B cell receptor (BCR) with the Lyn-enriched lipid microdomain on the plasma membrane of live cells upon antigen binding, one of the earliest signaling events in BCR-mediated B cell activation.

  20. Soft stylus probes for scanning electrochemical microscopy.

    Science.gov (United States)

    Cortés-Salazar, Fernando; Träuble, Markus; Li, Fei; Busnel, Jean-Marc; Gassner, Anne-Laure; Hojeij, Mohamad; Wittstock, Gunther; Girault, Hubert H

    2009-08-15

    A soft stylus microelectrode probe has been developed to carry out scanning electrochemical microscopy (SECM) of rough, tilted, and large substrates in contact mode. It is fabricated by first ablating a microchannel in a polyethylene terephthalate thin film and filling it with a conductive carbon ink. After curing the carbon track and lamination with a polymer film, the V-shaped stylus was cut thereby forming a probe, with the cross section of the carbon track at the tip being exposed either by UV-photoablation machining or by blade cutting followed by polishing to produce a crescent moon-shaped carbon microelectrode. The probe properties have been assessed by cyclic voltammetry, approach curves, and line scans over electrochemically active and inactive substrates of different roughness. The influence of probe bending on contact mode imaging was then characterized using simple patterns. Boundary element method simulations were employed to rationalize the distance-dependent electrochemical response of the soft stylus probes.

  1. Non-linear image scanning microscopy (Conference Presentation)

    Science.gov (United States)

    Gregor, Ingo; Ros, Robert; Enderlein, Jörg

    2017-02-01

    Nowadays, multiphoton microscopy can be considered as a routine method for the observation of living cells, organs, up to whole organisms. Second-harmonics generation (SHG) imaging has evolved to a powerful qualitative and label-free method for studying fibrillar structures, like collagen networks. However, examples of super-resolution non-linear microscopy are rare. So far, such approaches require complex setups and advanced synchronization of scanning elements limiting the image acquisition rates. We describe theory and realization of a super-resolution image scanning microscope [1, 2] using two-photon excited fluorescence as well as second-harmonic generation. It requires only minor modifications compared to a classical two-photon laser-scanning microscope and allows image acquisition at the high frame rates of a resonant galvo-scanner. We achieve excellent sensitivity and high frame-rate in combination with two-times improved lateral resolution. We applied this method to fixed cells, collagen hydrogels, as well as living fly embryos. Further, we proofed the excellent image quality of our setup for deep tissue imaging. 1. Müller C.B. and Enderlein J. (2010) Image scanning microscopy. Phys. Rev. Lett. 104(19), 198101. 2. Sheppard C.J.R. (1988) Super-resolution in confocal imaging. Optik (Stuttg) 80 53-54.

  2. Differential-Concentration Scanning Ion Conductance Microscopy.

    Science.gov (United States)

    Perry, David; Page, Ashley; Chen, Baoping; Frenguelli, Bruno G; Unwin, Patrick R

    2017-11-21

    Scanning ion conductance microscopy (SICM) is a nanopipette-based scanning probe microscopy technique that utilizes the ionic current flowing between an electrode inserted inside a nanopipette probe containing electrolyte solution and a second electrode placed in a bulk electrolyte bath, to provide information on a substrate of interest. For most applications to date, the composition and concentration of the electrolyte inside and outside the nanopipette is identical, but it is shown herein that it can be very beneficial to lift this restriction. In particular, an ionic concentration gradient at the end of the nanopipette, generates an ionic current with a greatly reduced electric field strength, with particular benefits for live cell imaging. This differential concentration mode of SICM (ΔC-SICM) also enhances surface charge measurements and provides a new way to carry out reaction mapping measurements at surfaces using the tip for simultaneous delivery and sensing of the reaction rate. Comprehensive finite element method (FEM) modeling has been undertaken to enhance understanding of SICM as an electrochemical cell and to enable the interpretation and optimization of experiments. It is shown that electroosmotic flow (EOF) has much more influence on the nanopipette response in the ΔC-SICM configuration compared to standard SICM modes. The general model presented advances previous treatments, and it provides a framework for quantitative SICM studies.

  3. Phase-contrast scanning transmission electron microscopy.

    Science.gov (United States)

    Minoda, Hiroki; Tamai, Takayuki; Iijima, Hirofumi; Hosokawa, Fumio; Kondo, Yukihito

    2015-06-01

    This report introduces the first results obtained using phase-contrast scanning transmission electron microscopy (P-STEM). A carbon-film phase plate (PP) with a small center hole is placed in the condenser aperture plane so that a phase shift is introduced in the incident electron waves except those passing through the center hole. A cosine-type phase-contrast transfer function emerges when the phase-shifted scattered waves interfere with the non-phase-shifted unscattered waves, which passed through the center hole before incidence onto the specimen. The phase contrast resulting in P-STEM is optically identical to that in phase-contrast transmission electron microscopy that is used to provide high contrast for weak phase objects. Therefore, the use of PPs can enhance the phase contrast of the STEM images of specimens in principle. The phase shift resulting from the PP, whose thickness corresponds to a phase shift of π, has been confirmed using interference fringes displayed in the Ronchigram of a silicon single crystal specimen. The interference fringes were found to abruptly shift at the edge of the PP hole by π. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Angular Approach Scanning Ion Conductance Microscopy.

    Science.gov (United States)

    Shevchuk, Andrew; Tokar, Sergiy; Gopal, Sahana; Sanchez-Alonso, Jose L; Tarasov, Andrei I; Vélez-Ortega, A Catalina; Chiappini, Ciro; Rorsman, Patrik; Stevens, Molly M; Gorelik, Julia; Frolenkov, Gregory I; Klenerman, David; Korchev, Yuri E

    2016-05-24

    Scanning ion conductance microscopy (SICM) is a super-resolution live imaging technique that uses a glass nanopipette as an imaging probe to produce three-dimensional (3D) images of cell surface. SICM can be used to analyze cell morphology at nanoscale, follow membrane dynamics, precisely position an imaging nanopipette close to a structure of interest, and use it to obtain ion channel recordings or locally apply stimuli or drugs. Practical implementations of these SICM advantages, however, are often complicated due to the limitations of currently available SICM systems that inherited their design from other scanning probe microscopes in which the scan assembly is placed right above the specimen. Such arrangement makes the setting of optimal illumination necessary for phase contrast or the use of high magnification upright optics difficult. Here, we describe the designs that allow mounting SICM scan head on a standard patch-clamp micromanipulator and imaging the sample at an adjustable approach angle. This angle could be as shallow as the approach angle of a patch-clamp pipette between a water immersion objective and the specimen. Using this angular approach SICM, we obtained topographical images of cells grown on nontransparent nanoneedle arrays, of islets of Langerhans, and of hippocampal neurons under upright optical microscope. We also imaged previously inaccessible areas of cells such as the side surfaces of the hair cell stereocilia and the intercalated disks of isolated cardiac myocytes, and performed targeted patch-clamp recordings from the latter. Thus, our new, to our knowledge, angular approach SICM allows imaging of living cells on nontransparent substrates and a seamless integration with most patch-clamp setups on either inverted or upright microscopes, which would facilitate research in cell biophysics and physiology. Copyright © 2016 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  5. Scanning electron microscopy of molluscum contagiosum*

    Science.gov (United States)

    de Almeida Jr, Hiram Larangeira; Abuchaim, Martha Oliveira; Schneider, Maiko Abel; Marques, Leandra; de Castro, Luis Antônio Suíta

    2013-01-01

    Molluscum contagiosum is a disease caused by a poxvirus. It is more prevalent in children up to 5 years of age. There is a second peak of incidence in young adults. In order to examine its ultrastructure, three lesions were curetted without disruption, cut transversely with a scalpel, and routinely processed for scanning electron microscopy (SEM). The oval structure of molluscum contagiosum could be easily identified. In its core, there was a central umbilication and just below this depression, there was a keratinized tunnel. Under higher magnification, a proliferation similar to the epidermis was seen. Moreover, there were areas of cells disposed like a mosaic. Under higher magnification, rounded structures measuring 0.4 micron could be observed at the end of the keratinized tunnel and on the surface of the lesion. PMID:23539009

  6. Spin-polarized scanning tunnelling microscopy

    CERN Document Server

    Bode, M

    2003-01-01

    The recent experimental progress in spin-polarized scanning tunnelling microscopy (SP-STM) - a magnetically sensitive imaging technique with ultra-high resolution - is reviewed. The basics of spin-polarized electron tunnelling are introduced as they have been investigated in planar tunnel junctions for different electrode materials, i.e. superconductors, optically excited GaAs, and ferromagnets. It is shown that ferromagnets and antiferromagnets are suitable tip materials for the realization of SP-STM. Possible tip designs and modes of operations are discussed for both classes of materials. The results of recent spatially resolved measurements as performed with different magnetic probe tips and using different modes of operation are reviewed and discussed in terms of applicability to surfaces, thin films, and nanoparticles. The limits of spatial resolution, and the impact of an external magnetic field on the imaging process.

  7. Nanoscale Laser Terahertz Emission Microscopy

    DEFF Research Database (Denmark)

    Klarskov, Pernille; Kim, Hyewon; Colvin, Vicki L.

    2017-01-01

    Laser terahertz emission microscopy (LTEM) has become a powerful tool for studying ultrafast dynamics and local fields in many different types of materials. This technique, which relies on acceleration of charge carriers in a material upon femtosecond excitation, can provide insight into the phys......Laser terahertz emission microscopy (LTEM) has become a powerful tool for studying ultrafast dynamics and local fields in many different types of materials. This technique, which relies on acceleration of charge carriers in a material upon femtosecond excitation, can provide insight...... into the physics of charge transport, built-in fields, grain boundaries or surface states. We describe a new implementation of LTEM with a spatial resolution in the nanoscale regime based on a scattering-type near-field tip-based approach. We observe a spectral reshaping of the signal compared to conventional LTEM......-size-limited spatial resolution of ∼20 nm by imaging a gold nanorod using terahertz emission from the underlying substrate. This work enables for the first time the possibility of performing LTEM measurements on individual nanostructures....

  8. Surface morphology of sound deciduous tooth enamel after application of a photo-absorbing cream and infrared low-level laser irradiation: an in vitro scanning electron microscopy study.

    Science.gov (United States)

    De Sant'Anna, Giselle Rodrigues; Paleari, Giovanna Souza Leão; Duarte, Danilo Antônio; Brugnera, Aldo; Soares, Cristina Pacheco

    2007-12-01

    The purpose of this descriptive scanning electron microscopic study was to characterize surface alterations in deciduous tooth enamel after in vitro infrared diode laser irradiation, using a photo-absorbing agent alone and also combined with fluoride, before and after laser irradiation. Previous investigations have demonstrated increased enamel caries resistance after laser irradiation. Seven extracted or exfoliated primary molar teeth underwent soft tissue débridement and fluoride-free prophylaxis. Buccal surfaces were determined to be caries free by macroscopic examination. Sample groups were divided into: (1) control (no treatment); (2) infrared diode laser irradiation (lambda = 810 nm, 68 nm, 60 mW/mm(2), 30 W) using the photo-absorbing agent alone (IRDL + PA; 500 J/cm(2)); and (3) infrared diode laser irradiation using a photo-absorbing agent combined with 2% fluoride (IRDL + PFA; 500 J/cm(2)). Buccal surfaces were evaluated following standard scanning electron microscopy preparation techniques. Control samples of enamel surfaces were relatively smooth but presented occasional enamel prism ends. There were no areas with cavitations or surface defects. After the IRDL + PA treatment, irradiated surfaces became rough and mildly to moderately irregular with scarce enamel cavitations and without exposure of enamel prism ends. The surfaces had adherent granules and only occasional fine cracks and porosities in surface coatings were noted. After the IRDL + PFA treatment, there was a homogenous confluent surface that masked typical enamel surface markings. The surfaces had well-defined globules resulting from the IRDL + PFA treatment, that were not seen after IRDL + PA treatment. Treatment of deciduous tooth enamel with infrared diode laser irradiation using a photo-absorbing agent and a photo-absorbing agent combined with 2% fluoride created surface coatings that may act as reservoirs for mineral phases during cariogenic activity on enamel, and also provide a

  9. Integrated Confocal and Scanning Probe Microscopy for Biomedical Research

    Directory of Open Access Journals (Sweden)

    B.J. Haupt

    2006-01-01

    Full Text Available Atomic force microscopy (AFM continues to be developed, not only in design, but also in application. The new focus of using AFM is changing from pure material to biomedical studies. More frequently, it is being used in combination with other optical imaging methods, such as confocal laser scanning microscopy (CLSM and fluorescent imaging, to provide a more comprehensive understanding of biological systems. To date, AFM has been used increasingly as a precise micromanipulator, probing and altering the mechanobiological characteristics of living cells and tissues, in order to examine specific, receptor-ligand interactions, material properties, and cell behavior. In this review, we discuss the development of this new hybrid AFM, current research, and potential applications in diagnosis and the detection of disease.

  10. Scanning ion microscopy with low energy lithium ions

    Energy Technology Data Exchange (ETDEWEB)

    Twedt, Kevin A. [Center for Nanoscale Science and Technology, National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); Maryland NanoCenter, University of Maryland, College Park, MD 20742 (United States); Chen, Lei [Center for Nanoscale Science and Technology, National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); McClelland, Jabez J., E-mail: jabez.mcclelland@nist.gov [Center for Nanoscale Science and Technology, National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States)

    2014-07-01

    Using an ion source based on photoionization of laser-cooled lithium atoms, we have developed a scanning ion microscope with probe sizes of a few tens of nanometers and beam energies from 500 eV to 5 keV. These beam energies are much lower than the typical operating energies of the helium ion microscope or gallium focused ion beam systems. We demonstrate how low energy can be advantageous in ion microscopy when detecting backscattered ions, due to a decreased interaction volume and the potential for surface sensitive composition analysis. As an example application that demonstrates these advantages, we non-destructively image the removal of a thin residual resist layer during plasma etching in a nano-imprint lithography process. - Highlights: • We use an ion source based on photoionization of laser-cooled lithium atoms. • The ion source makes possible a low energy (500 eV to 5 keV) scanning ion microscope. • Low energy is preferred for ion microscopy with backscattered ions. • We use the microscope to image a thin resist used in nano-imprint lithography.

  11. Scanned probe microscopy for thin film superconductor development

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, J. [National Institute of Standards and Technology, Boulder, CO (United States)

    1996-12-31

    Scanned probe microscopy is a general term encompassing the science of imaging based on piezoelectric driven probes for measuring local changes in nanoscale properties of materials and devices. Techniques like scanning tunneling microscopy, atomic force microscopy, and scanning potentiometry are becoming common tools in the production and development labs in the semiconductor industry. The author presents several examples of applications specific to the development of high temperature superconducting thin films and thin-film devices.

  12. Organic pollutant clustered in the plant cuticular membranes: visualizing the distribution of phenanthrene in leaf cuticle using two-photon confocal scanning laser microscopy.

    Science.gov (United States)

    Li, Qingqing; Chen, Baoliang

    2014-05-06

    Plants play a key role in the transport and fate of organic pollutants. Cuticles on plant surfaces represent the first resistance for the uptake of airborne toxicants. In this study, a confocal scanning microscope enhanced with a two-photon laser was applied as a direct and noninvasive probe to explore the in situ uptake of a model pollutant, phenanthrene (PHE), into the cuticular membrane of a hypostomatic plant, Photinia serrulata. On the leaf cuticle surfaces, PHE forms clusters instead of being evenly distributed. The PHE distribution was quantified by the PHE fluorescence intensity. When PHE concentrations in water varying over 5 orders of magnitude were applied to the isolated cuticle, the accumulated PHE level by the cuticle was not vastly different, whether PHE was applied to the outer or inner side of the cuticle. Notably, PHE was found to diffuse via a channel-like pathway into the middle layer of the cuticle matrix, where it was identified to be composed of polymeric lipids. The strong affinity of PHE for polymeric lipids is a major contributor of the fugacity gradient driving the diffusive uptake of PHE in the cuticular membrane. Membrane lipids constitute important domains for hydrophobic interaction with pollutants, determining significant differentials of fugacities within the membrane microsystem. These, under unsteady conditions, contribute to enhance net transport and clustering along the z dimension. Moreover, the liquid-like state of polymeric lipids may promote mobility by enhancing the diffusion rate. The proposed "diffusive uptake and storage" function of polymeric lipids within the membrane characterizes the modality of accumulation of the hydrophobic contaminant at the interface between the plant and the environment. Assessing the capacity of fugacity of these constituents in detail will bring about knowledge of contaminant fate in superior plants with a higher level of accuracy.

  13. Scanning laser polarimetry in glaucoma.

    Science.gov (United States)

    Dada, Tanuj; Sharma, Reetika; Angmo, Dewang; Sinha, Gautam; Bhartiya, Shibal; Mishra, Sanjay K; Panda, Anita; Sihota, Ramanjit

    2014-11-01

    Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL). White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP) are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  14. Scanning laser polarimetry in glaucoma

    Directory of Open Access Journals (Sweden)

    Tanuj Dada

    2014-01-01

    Full Text Available Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL. White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  15. EDITORIAL: Scanning probe microscopy: a visionary development Scanning probe microscopy: a visionary development

    Science.gov (United States)

    Demming, Anna

    2013-07-01

    The development of scanning probe microscopy repositioned modern physics. When Rohrer and Binnig first used electronic tunnelling effects to image atoms and quantum states they did more than pin down theoretical hypotheses to real-world observables; the scanning tunnelling microscope fed imaginations, prompting researchers to consider new directions and possibilities [1]. As Rohrer once commented, 'We could show that you can easily manipulate or position something small in space with an accuracy of 10 pm.... When you can do that, you simply have ideas of what you can do' [2]. The development heralded a cavalry of scanning probe techniques—such as atomic force microscopy (AFM) [3-5], scanning near-field optical microscopy (SNOM) [6-8] and Kelvin probe force microscopy (KPFM) [9, 10]—that still continue to bring nanomaterials and nanoscale phenomena into fresh focus. Not long after the development of scanning tunnelling microscopy, Binnig, Quate and Gerber collaborating in California in the US published work on a new type of microscope also capable of atomic level resolution [3]. The original concept behind scanning tunnelling microscopy uses electrical conductance, which places substantial limitations on the systems that it can image. Binnig, Quate and Gerber developed the AFM to 'feel' the topology of surfaces like the needle of an old fashioned vinyl player. In this way insulators could be imaged as well. The development of a force modulation mode AFM extended the tool's reach to soft materials making images of biological samples accessible with the technique [4]. There have now been a number of demonstrations of image capture at rates that allow dynamics at the nanoscale to be tracked in real time, opening further possibilities in applications of the AFM as described in a recent review by Toshio Ando at Kanazawa University [5]. Researchers also found a way to retrieve optical information at 'super-resolution' [6, 7]. Optical microscopy provides spectral

  16. Scanning transmission electron microscopy imaging and analysis

    CERN Document Server

    Pennycook, Stephen J

    2011-01-01

    Provides the first comprehensive treatment of the physics and applications of this mainstream technique for imaging and analysis at the atomic level Presents applications of STEM in condensed matter physics, materials science, catalysis, and nanoscience Suitable for graduate students learning microscopy, researchers wishing to utilize STEM, as well as for specialists in other areas of microscopy Edited and written by leading researchers and practitioners

  17. Galvanometer scanning technology for laser additive manufacturing

    Science.gov (United States)

    Luo, Xi; Li, Jin; Lucas, Mark

    2017-02-01

    A galvanometer laser beam scanning system is an essential element in many laser additive manufacturing (LAM) technologies including Stereolithography (SLA), Selective Laser Sintering (SLS) and Selective Laser Melting (SLM). Understanding the laser beam scanning techniques and recent innovations in this field will greatly benefit the 3D laser printing system integration and technology advance. One of the challenges to achieve high quality 3D printed parts is due to the non-uniform laser power density delivered on the materials caused by the acceleration and deceleration movements of the galvanometer at ends of the hatching and outlining patterns. One way to solve this problem is to modulate the laser power as the function of the scanning speed during the acceleration or deceleration periods. Another strategy is to maintain the constant scanning speed while accurately coordinating the laser on and off operation throughout the job. In this paper, we demonstrate the high speed, high accuracy and low drift digital scanning technology that incorporates both techniques to achieve uniform laser density with minimal additional process development. With the constant scanning speed method, the scanner not only delivers high quality and uniform results, but also a throughput increase of 23% on a typical LAM job, compared to that of the conventional control method that requires galvanometer acceleration and deceleration movements.

  18. Laser line scan performance prediction

    Science.gov (United States)

    Mahoney, Kevin L.; Schofield, Oscar; Kerfoot, John; Giddings, Tom; Shirron, Joe; Twardowski, Mike

    2007-09-01

    The effectiveness of sensors that use optical measurements for the laser detection and identification of subsurface mines is directly related to water clarity. The primary objective of the work presented here was to use the optical data collected by UUV (Slocum Glider) surveys of an operational areas to estimate the performance of an electro-optical identification (EOID) Laser Line Scan (LLS) system during RIMPAC 06, an international naval exercise off the coast of Hawaii. Measurements of optical backscattering and beam attenuation were made with a Wet Labs, Inc. Scattering Absorption Meter (SAM), mounted on a Rutgers University/Webb Research Slocum glider. The optical data universally indicated extremely clear water in the operational area, except very close to shore. The beam-c values from the SAM sensor were integrated to three attenuation lengths to provide an estimate of how well the LLS would perform in detecting and identifying mines in the operational areas. Additionally, the processed in situ optical data served as near-real-time input to the Electro-Optic Detection Simulator, ver. 3 (EODES-3; Metron, Inc.) model for EOID performance prediction. Both methods of predicting LLS performance suggested a high probability of detection and probability of identification. These predictions were validated by the actual performance of the LLS as the EOID system yielded imagery from which reliable mine identification could be made. Future plans include repeating this work in more optically challenging water types to demonstrate the utility of pre-mission UUV surveys of operational areas as a tactical decision aid for planning EOID missions.

  19. Probing cytotoxicity of nanoparticles and organic compounds using scanning proton microscopy, scanning electron microscopy and fluorescence microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tong Yongpeng [Institute of Nuclear Techniques, Shenzhen University, Nanhai Avenue 3688, Shenzhen 518060 (China)], E-mail: yongpengt@yahoo.com.cn; Li Changming [School of Chemical and Biomedical Engineering, Nanyang Technological University, Singapore 637457 (Singapore); Liang Feng [Institute Pasteur of Shanghai, Chinese Academy of Sciences, Shanghai 200025 (China); Chen Jianmin [Shenzhen Municipal Hospital for Chronic Disease Control and Prevention, Guangdong 518020 (China); Zhang Hong; Liu Guoqing; Sun Huibin [Institute of Nuclear Techniques, Shenzhen University, Nanhai Avenue 3688, Shenzhen 518060 (China); Luong, John H.T. [Biotechnology Research Institute, National Research Council Canada, Montreal, Quebec, H4P 2R2 (Canada)

    2008-12-15

    Scanning proton microscopy, scanning electron microscopy (SEM) and fluorescence microscopy have been used to probe the cytotoxicity effect of benzo[a]pyrene (BaP), ethidium bromide (EB) and nanoparticles (ZnO, Al{sub 2}O{sub 3} and TiO{sub 2}) on a T lymphoblastic leukemia Jurkat cell line. The increased calcium ion (from CaCl{sub 2}) in the culture medium stimulated the accumulation of BaP and EB inside the cell, leading to cell death. ZnO, Al{sub 2}O{sub 3} and TiO{sub 2} nanoparticles, however, showed a protective effect against these two organic compounds. Such inorganic nanoparticles complexed with BaP or EB which became less toxic to the cell. Fe{sub 2}O{sub 3} nanoparticles as an insoluble particle model scavenged by macrophage were investigated in rats. They were scavenged out of the lung tissue about 48 h after infection. This result suggest that some insoluble inorganic nanoparticles of PM (particulate matters) showed protective effects on organic toxins induced acute toxic effects as they can be scavenged by macrophage cells. Whereas, some inorganic ions such as calcium ion in PM may help environmental organic toxins to penetrate cell membrane and induce higher toxic effect.

  20. Combined frequency modulated atomic force microscopy and scanning tunneling microscopy detection for multi-tip scanning probe microscopy applications

    Science.gov (United States)

    Morawski, Ireneusz; Spiegelberg, Richard; Korte, Stefan; Voigtländer, Bert

    2015-12-01

    A method which allows scanning tunneling microscopy (STM) tip biasing independent of the sample bias during frequency modulated atomic force microscopy (AFM) operation is presented. The AFM sensor is supplied by an electronic circuit combining both a frequency shift signal and a tunneling current signal by means of an inductive coupling. This solution enables a control of the tip potential independent of the sample potential. Individual tip biasing is specifically important in order to implement multi-tip STM/AFM applications. An extensional quartz sensor (needle sensor) with a conductive tip is applied to record simultaneously topography and conductivity of the sample. The high resonance frequency of the needle sensor (1 MHz) allows scanning of a large area of the surface being investigated in a reasonably short time. A recipe for the amplitude calibration which is based only on the frequency shift signal and does not require the tip being in contact is presented. Additionally, we show spectral measurements of the mechanical vibration noise of the scanning system used in the investigations.

  1. Preliminary Study of In Vivo Formed Dental Plaque Using Confocal Microscopy and Scanning Electron Microscopy

    Directory of Open Access Journals (Sweden)

    KA. Al-Salihi

    2009-12-01

    Full Text Available Objective: Confocal laser scanning microscopy (CLSM is relatively a new light microscopical imaging technique with a wide range of applications in biological sciences. The primary value of CLSM for the biologist is its ability to provide optical sections from athree-dimensional specimen. The present study was designed to assess the thickness and content of in vivo accumulated dental plaque using CLSM and scanning electron microscopy (SEM.Materials and Methods: Acroflat lower arch splints (acrylic appliance were worn by five participants for three days without any disturbance. The formed plaques were assessed using CLSM combined with vital fluorescence technique and SEM.Results: In this study accumulated dental plaque revealed varied plaque microflora vitality and thickness according to participant’s oral hygiene. The thickness of plaque smears ranged from 40.32 to 140.72 μm and 65.00 to 128.88 μm for live (vital and dead accumulated microorganisms, respectively. Meanwhile, the thickness of plaque on the appliance ranged from 101 μm to 653 μm. CLSM revealed both dead and vital bacteria on the surface of the dental plaque. In addition, SEM revealed layers of various bacterial aggregations in all dental plaques.Conclusion: This study offers a potent non-invasive tool to evaluate and assess the dental plaque biofilm, which is a very important factor in the development of dental caries.

  2. Multicolor Scanning Laser Imaging in Diabetic Retinopathy.

    Science.gov (United States)

    Ahmad, Mohammad S Z; Carrim, Zia Iqbal

    2017-11-01

    Diabetic retinopathy is a common cause of blindness in individuals younger than 60 years. Screening for retinopathy is undertaken using conventional color fundus photography and relies on the identification of hemorrhages, vascular abnormalities, exudates, and cotton-wool spots. These can sometimes be difficult to identify. Multicolor scanning laser imaging, a new imaging modality, may have a role in improving screening outcomes, as well as facilitating treatment decisions. Observational case series comprising two patients with known diabetes who were referred for further examination after color fundus photography revealed abnormal findings. Multicolor scanning laser imaging was undertaken. Features of retinal disease from each modality were compared. Multicolor scanning laser imaging provides superior visualization of retinal anatomy and pathology, thereby facilitating risk stratification and treatment decisions. Multicolor scanning laser imaging is a novel imaging technique offering the potential for improving the reliability of screening for diabetic retinopathy. Validation studies are warranted.

  3. Plant cell wall characterization using scanning probe microscopy techniques

    Science.gov (United States)

    Yarbrough, John M; Himmel, Michael E; Ding, Shi-You

    2009-01-01

    Lignocellulosic biomass is today considered a promising renewable resource for bioenergy production. A combined chemical and biological process is currently under consideration for the conversion of polysaccharides from plant cell wall materials, mainly cellulose and hemicelluloses, to simple sugars that can be fermented to biofuels. Native plant cellulose forms nanometer-scale microfibrils that are embedded in a polymeric network of hemicelluloses, pectins, and lignins; this explains, in part, the recalcitrance of biomass to deconstruction. The chemical and structural characteristics of these plant cell wall constituents remain largely unknown today. Scanning probe microscopy techniques, particularly atomic force microscopy and its application in characterizing plant cell wall structure, are reviewed here. We also further discuss future developments based on scanning probe microscopy techniques that combine linear and nonlinear optical techniques to characterize plant cell wall nanometer-scale structures, specifically apertureless near-field scanning optical microscopy and coherent anti-Stokes Raman scattering microscopy. PMID:19703302

  4. Plant cell wall characterization using scanning probe microscopy techniques

    Directory of Open Access Journals (Sweden)

    Himmel Michael E

    2009-08-01

    Full Text Available Abstract Lignocellulosic biomass is today considered a promising renewable resource for bioenergy production. A combined chemical and biological process is currently under consideration for the conversion of polysaccharides from plant cell wall materials, mainly cellulose and hemicelluloses, to simple sugars that can be fermented to biofuels. Native plant cellulose forms nanometer-scale microfibrils that are embedded in a polymeric network of hemicelluloses, pectins, and lignins; this explains, in part, the recalcitrance of biomass to deconstruction. The chemical and structural characteristics of these plant cell wall constituents remain largely unknown today. Scanning probe microscopy techniques, particularly atomic force microscopy and its application in characterizing plant cell wall structure, are reviewed here. We also further discuss future developments based on scanning probe microscopy techniques that combine linear and nonlinear optical techniques to characterize plant cell wall nanometer-scale structures, specifically apertureless near-field scanning optical microscopy and coherent anti-Stokes Raman scattering microscopy.

  5. PSD microscopy: a new technique for adaptive local scanning of microscale objects.

    Science.gov (United States)

    Rahimi, Mehdi; Shen, Yantao

    2017-01-01

    A position-sensitive detector/device (PSD) is a sensor that is capable of tracking the location of a laser beam on its surface. PSDs are used in many scientific instruments and technical applications including but not limited to atomic force microscopy, human eye movement monitoring, mirrors or machine tool alignment, vibration analysis, beam position control and so on. This work intends to propose a new application using the PSD. That is a new microscopy system called scanning PSD microscopy. The working mechanism is about putting an object on the surface of the PSD and fast scanning its area with a laser beam. To achieve a high degree of accuracy and precision, a reliable framework was designed using the PSD. In this work, we first tried to improve the PSD reading and its measurement performance. This was done by minimizing the effects of noise, distortion and other disturbing parameters. After achieving a high degree of confidence, the microscopy system can be implemented based on the improved PSD measurement performance. Later to improve the scanning efficiency, we developed an adaptive local scanning system to scan the whole area of the PSD in a short matter of time. It was validated that our comprehensive and adaptive local scanning method can shorten the scanning time in order of hundreds of times in comparison with the traditional raster scanning without losing any important information about the scanned 2D objects. Methods are also introduced to scan very complicated objects with bifurcations and crossings. By incorporating all these methods, the new microscopy system is capable of scanning very complicated objects in the matter of a few seconds with a resolution that is in order of a few micrometers.

  6. Full information acquisition in scanning probe microscopy and spectroscopy

    Science.gov (United States)

    Jesse, Stephen; Belianinov, Alex; Kalinin, Sergei V.; Somnath, Suhas

    2017-04-04

    Apparatus and methods are described for scanning probe microscopy and spectroscopy based on acquisition of full probe response. The full probe response contains valuable information about the probe-sample interaction that is lost in traditional scanning probe microscopy and spectroscopy methods. The full probe response is analyzed post data acquisition using fast Fourier transform and adaptive filtering, as well as multivariate analysis. The full response data is further compressed to retain only statistically significant components before being permanently stored.

  7. Investigation of whispering gallery modes in microlasers by scanning near-field optical microscopy

    Science.gov (United States)

    Polubavkina, Yu S.; Kryzhanovskaya, N. V.; Nadtochiy, A. M.; Mintairov, A. M.; Lipovsky, A. A.; Scherbak, S. A.; Kulagina, M. M.; Maximov, M. V.; Zhukov, A. E.

    2017-11-01

    Near-field scanning optical microscopy (NSOM) with a spatial resolution below the light diffraction limit was used to study intensity distributions of the whispering gallery modes (WGMs) in quantum dot-based microdisk and microring lasers on GaAs with different outer diameters. Room temperature microphotoluminescence study (μPL) reveal lasing in microlasers of both geometries.

  8. Sealing ability of mineral trioxide aggregate, calcium phosphate and polymethylmethacrylate bone cements on root ends prepared using an Erbium: Yttriumaluminium garnet laser and ultrasonics evaluated by confocal laser scanning microscopy.

    Science.gov (United States)

    Girish, C Sabari; Ponnappa, Kc; Girish, Tn; Ponappa, Mc

    2013-07-01

    Surgical endodontic therapy comprises of exposure of the involved root apex, resection of the apical end of the root, preparation of a class I cavity, and insertion of a root end filling material. Mineral trioxide aggregate (MTA) is now the gold standard among all root end filling materials. MTA is however difficult to handle, expensive and has a very slow setting reaction. (1) To compare the sealing ability of MTA, polymethylmethacrylate (PMMA) bone cement and CHITRA Calcium phosphate cement (CPC) when used as root end filling material using Rhodamine B dye evaluated under a confocal laser scanning microscope. (2) To compare the seal of root ends prepared using an ultrasonic retroprep tip and an Er: YAG laser using three different root end filling materials. Statistical analysis was performed using a one-way ANOVA and a two-way ANOVA, independent samples t-test and Scheffe's post hoc test using SPSS Version 16 for Windows. All the three materials, namely MTA, PMMA BONE CEMENT and CHITRA CPC, showed microleakage. Comparison of microleakage showed maximum peak value of 0.86 mm for MTA, 0.24 mm for PMMA bone cement and 1.37 mm for CHITRA CPC. The amount of dye penetration was found to be lesser in root ends prepared using Er: YAG laser when compared with ultrasonics, but the difference was found to be not statistically significant. PMMA bone cement is a better material as root end filling material to prevent apical microleakage. MTA still continues to be a gold standard root end filling material showing minimum microleakage. Er: YAG laser is a better alternative to ultrasonics for root end preparations.

  9. Towards Automated Nanomanipulation under Scanning Electron Microscopy

    Science.gov (United States)

    Ye, Xutao

    Robotic Nanomaterial Manipulation inside scanning electron microscopes (SEM) is useful for prototyping functional devices and characterizing one-dimensional nanomaterial's properties. Conventionally, manipulation of nanowires has been performed via teleoperation, which is time-consuming and highly skill-dependent. Manual manipulation also has the limitation of low success rates and poor reproducibility. This research focuses on a robotic system capable of automated pick-place of single nanowires. Through SEM visual detection and vision-based motion control, the system transferred individual silicon nanowires from their growth substrate to a microelectromechanical systems (MEMS) device that characterized the nanowires' electromechanical properties. The performances of the nanorobotic pick-up and placement procedures were quantified by experiments. The system demonstrated automated nanowire pick-up and placement with high reliability. A software system for a load-lock-compatible nanomanipulation system is also designed and developed in this research.

  10. Vancomycin sorption on activated sludge Gram(+) bacteria rather than on EPS; 3D Confocal Laser Scanning Microscopy time-lapse imaging.

    Science.gov (United States)

    Louvet, J N; Carrion, C; Stalder, T; Alrhmoun, M; Casellas, M; Potier, O; Pons, M N; Dagot, C

    2017-11-01

    Antibiotics-bacteria interactions depend on antibiotic concentration at the scale of bacteria. This study investigates how vancomycin penetrates into activated sludge flocs and can be sorbed on the bacteria and extracellular polymeric substances (EPS). The 3D structure of flocs was imaged using EPS autofluorescence. The green fluorescent BODIPY(®) FL vancomycin was introduced in a microscopic chamber containing activated sludge and penetration of vancomycin into the flocs by diffusion was observed using time-lapse microscopy. The penetration depended on the floc structure, as long and large pores could go through the whole flocs making preferential path. The antibiotic concentration into the flocs was also found to depend on the sorption rate. BODIPY(®) FL vancomycin was found to bind preferentially into Gram(+) bacteria than on EPS. The vancomycin adsorption constant on bacteria according to the linear adsorption model, Kdbacteria was estimated to be 5 times higher (SD 2.6) than the adsorption constant on EPS KdEPS. These results suggest that antibiotic removal by sorption into wastewater treatment plants could change according to the amount of bacteria in the sludge. Moreover, antibiotic concentration at the scale of bacteria could be significantly higher than the concentration in the bulk solution and this should be taken into account when studying antibiotic activity or biodegradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. New Applications of Scanning Tunneling Microscopy

    Science.gov (United States)

    Smith, Douglas Philip Edward

    This dissertation describes the application of the scanning tunneling microscope (STM) technique to four new fields of study: thin organic films, phonon spectroscopy of bulk surfaces, the vibrational spectroscopy of molecules, and the tribological forces which occur between STM tip and sample. Images with atomic resolution were obtained with speeds approaching video rates. Two types of microscopes were used: one operated at room temperature in air, another at 4.2K in liquid helium. At room temperature, the STM was able to image molecules of cadmium arachidate deposited onto graphite by the Langmuir-Blodgett technique. The packing of molecules in the lipid bilayer was found to be partially ordered, with density of 1 molecule per 19.4 square angstroms. At liquid-helium temperature, inelastic electron processes were detected, and it was possible to determine within an area of a few square angstroms where the vibrational excitations occurred. On a bare graphite substrate, phonons of the sample and tip caused step increases in the tunneling conductivity at the phonon energies. Molecules of sorbic acid could be resolved when deposited onto graphite, and these molecules caused spatially localized peaks in conductivity at the energies of the bond vibrations. Although the STM is usually considered a non-contact instrument, under certain circumstances the tip and sample exerted strong forces on each other. With a tungsten tip and a graphite sample, friction and mechanical deformations on the atomic scale were observed.

  12. Open Source Scanning Probe Microscopy Control Software Package Gxsm

    Energy Technology Data Exchange (ETDEWEB)

    Zahl P.; Wagner, T.; Moller, R.; Klust, A.

    2009-08-10

    Gxsm is a full featured and modern scanning probe microscopy (SPM) software. It can be used for powerful multidimensional image/data processing, analysis, and visualization. Connected toan instrument, it is operating many different avors of SPM, e.g., scanning tunneling microscopy(STM) and atomic force microscopy (AFM) or in general two-dimensional multi channel data acquisition instruments. The Gxsm core can handle different data types, e.g., integer and oating point numbers. An easily extendable plug-in architecture provides many image analysis and manipulation functions. A digital signal processor (DSP) subsystem runs the feedback loop, generates the scanning signals and acquires the data during SPM measurements. The programmable Gxsm vector probe engine performs virtually any thinkable spectroscopy and manipulation task, such as scanning tunneling spectroscopy (STS) or tip formation. The Gxsm software is released under the GNU general public license (GPL) and can be obtained via the Internet.

  13. Vector sensor for scanning SQUID microscopy

    Science.gov (United States)

    Dang, Vu The; Toji, Masaki; Thanh Huy, Ho; Miyajima, Shigeyuki; Shishido, Hiroaki; Hidaka, Mutsuo; Hayashi, Masahiko; Ishida, Takekazu

    2017-07-01

    We plan to build a novel 3-dimensional (3D) scanning SQUID microscope with high sensitivity and high spatial resolution. In the system, a vector sensor consists of three SQUID sensors and three pick-up coils realized on a single chip. Three pick-up coils are configured in orthogonal with each other to measure the magnetic field vector of X, Y, Z components. We fabricated some SQUID chips with one uniaxial pick-up coil or three vector pick-up coils and carried out fundamental measurements to reveal the basic characteristics. Josephson junctions (JJs) of sensors are designed to have the critical current density J c of 320 A/cm2, and the critical current I c becomes 12.5 μA for the 2.2μm × 2.2μm JJ. We carefully positioned the three pickup coils so as to keep them at the same height at the centers of all three X, Y and Z coils. This can be done by arranging them along single line parallel to a sample surface. With the aid of multilayer technology of Nb-based fabrication, we attempted to reduce an inner diameter of the pickup coils to enhance both sensitivity and spatial resolution. The method for improving a spatial resolution of a local magnetic field image is to employ an XYZ piezo-driven scanner for controlling the positions of the pick-up coils. The fundamental characteristics of our SQUID sensors confirmed the proper operation of our SQUID sensors and found a good agreement with our design parameters.

  14. Laser-based dual-space microscopy

    Science.gov (United States)

    Alotaibi, Maged; Gedies, Robert; Alzayed, Abdullah; Aldawsari, Fahad; Dominguez, Daniel; Grave de Peralta, Luis

    2017-11-01

    We show using two-dimensional simulations that the dual-space microscopy (DSM) phase-recovery algorithm converges to the correct result for arbitrary samples. We present experimental results obtained by implementing the DSM technique using a laser. We demonstrate that DSM produces synthetic images with a large field of view when a laser is used as the illumination source. However, speckles affect the quality of the obtained images.

  15. Scanned Laser Illuminator/Receiver

    Science.gov (United States)

    1976-11-01

    velocity (i.e., R = -Vc). then the LOS rate beconas: MVc a = 2 2 R + M This equation is plotted as a function of range in Figure 3 for an aircraft...exp IŖ ^ W 2 + 4a2 ^ ) (2) J. E. Negro, "Pointing Variance and Beam Degradation Calculations", Laser Digest, AFWL-TR-74-100, . Spring 1974...AFWL-TR-74-100, Spring 1974. 4. A. E’.-Siegman, "Stabilizing todtput^ith Unstabüj Resonators", Laser Focus, May 1971. 6. A. J. Steckl, "Injection

  16. Scanning near-field infrared microscopy on semiconductor structures

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Rainer

    2011-01-15

    Near-field optical microscopy has attracted remarkable attention, as it is the only technique that allows the investigation of local optical properties with a resolution far below the diffraction limit. Especially, the scattering-type near-field optical microscopy allows the nondestructive examination of surfaces without restrictions to the applicable wavelengths. However, its usability is limited by the availability of appropriate light sources. In the context of this work, this limit was overcome by the development of a scattering-type near-field microscope that uses a widely tunable free-electron laser as primary light source. In the theoretical part, it is shown that an optical near-field contrast can be expected when materials with different dielectric functions are combined. It is derived that these differences yield different scattering cross-sections for the coupled system of the probe and the sample. Those cross-sections define the strength of the near-field signal that can be measured for different materials. Hence, an optical contrast can be expected, when different scattering cross-sections are probed. This principle also applies to vertically stacked or even buried materials, as shown in this thesis experimentally for two sample systems. In the first example, the different dielectric functions were obtained by locally changing the carrier concentration in silicon by the implantation of boron. It is shown that the concentration of free charge-carriers can be deduced from the near-field contrast between implanted and pure silicon. For this purpose, two different experimental approaches were used, a non-interferometric one by using variable wavelengths and an interferometric one with a fixed wavelength. As those techniques yield complementary information, they can be used to quantitatively determine the effective carrier concentration. Both approaches yield consistent results for the carrier concentration, which excellently agrees with predictions from

  17. UNC Pembroke Laser Scanning Confocal Microscopy Facility

    Science.gov (United States)

    2016-04-29

    decision, unless so designated by other documentation. 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS (ES) U.S. Army Research Office P.O. Box 12211...compare to histology images and to maximize data obtained from small groups of blast and toxin-treated samples, and 3) a guillotine and freezer for

  18. Applications of orientation mapping by scanning and transmission electron microscopy

    DEFF Research Database (Denmark)

    Juul Jensen, D.

    1997-01-01

    The potentials of orientation mapping techniques (in the following referred to as OIM) for studies of thermomechanical processes are analysed. Both transmission electron microscopy (TEM) and scanning electron microscopy (SEM) based OIM techniques are considered. Among the thermomechanical processes...... information is achieved when the results of OIM and these various techniques are combined. Examples hereof are given to illustrate the potentials of OIM techniques. Finally, limitations of TEM and SEM based OIM for specific applications are discussed....

  19. System and method for compressive scanning electron microscopy

    Science.gov (United States)

    Reed, Bryan W

    2015-01-13

    A scanning transmission electron microscopy (STEM) system is disclosed. The system may make use of an electron beam scanning system configured to generate a plurality of electron beam scans over substantially an entire sample, with each scan varying in electron-illumination intensity over a course of the scan. A signal acquisition system may be used for obtaining at least one of an image, a diffraction pattern, or a spectrum from the scans, the image, diffraction pattern, or spectrum representing only information from at least one of a select subplurality or linear combination of all pixel locations comprising the image. A dataset may be produced from the information. A subsystem may be used for mathematically analyzing the dataset to predict actual information that would have been produced by each pixel location of the image.

  20. Structural examination of lithium niobate ferroelectric crystals by combining scanning electron microscopy and atomic force microscopy

    Science.gov (United States)

    Efremova, P. V.; Ped'ko, B. B.; Kuznecova, Yu. V.

    2016-02-01

    The structure of lithium niobate single crystals is studied by a complex technique that combines scanning electron microscopy and atomic force microscopy. By implementing the piezoresponse force method on an atomic force microscope, the domain structure of lithium niobate crystals, which was not revealed without electron beam irradiation, is visualized

  1. Polarization contrast in photon scanning tunnelling microscopy combined with atomic force microscopy

    NARCIS (Netherlands)

    Propstra, K.; Propstra, K.; van Hulst, N.F.

    1995-01-01

    Photon scanning tunnelling microscopy combined with atomic force microscopy allows simultaneous acquisition and direct comparison of optical and topographical images, both with a lateral resolution of about 30 nm, far beyond the optical diffraction limit. The probe consists of a modified

  2. Conversion of biocytin labelled cells and structures for the confocal laser-scanning method.

    Science.gov (United States)

    Hilbig, H; Müller, A

    1997-05-23

    The method for converting biocytin preparations of brain sections fills a gap in the application of confocal laser-scanning microscopy. Both neuronal and non-neuronal structures are converted. The background remains free of staining. The protocol can be applied to old and already existing biocytin-(diaminobenzidine)-nickel preparations which are then made accessible to evaluation with the laser-scanning microscope by the substitution of nickel with silver-gold. Sodium thiosulphate is used to remove the unbound silver. The reflection image of the laser-scanning microscopy provides more information than the transmission image.

  3. Resonant Scanning with Large Field of View Reduces Photobleaching and Enhances Fluorescence Yield in STED Microscopy.

    Science.gov (United States)

    Wu, Yong; Wu, Xundong; Lu, Rong; Zhang, Jin; Toro, Ligia; Stefani, Enrico

    2015-10-01

    Photobleaching is a major limitation of superresolution Stimulated Depletion Emission (STED) microscopy. Fast scanning has long been considered an effective means to reduce photobleaching in fluorescence microscopy, but a careful quantitative study of this issue is missing. In this paper, we show that the photobleaching rate in STED microscopy can be slowed down and the fluorescence yield be enhanced by scanning with high speed, enabled by using large field of view in a custom-built resonant-scanning STED microscope. The effect of scanning speed on photobleaching and fluorescence yield is more remarkable at higher levels of depletion laser irradiance, and virtually disappears in conventional confocal microscopy. With ≥6 GW∙cm(-2) depletion irradiance, we were able to extend the fluorophore survival time of Atto 647N and Abberior STAR 635P by ~80% with 8-fold wider field of view. We confirm that STED Photobleaching is primarily caused by the depletion light acting upon the excited fluorophores. Experimental data agree with a theoretical model. Our results encourage further increasing the linear scanning speed for photobleaching reduction in STED microscopy.

  4. Scanning electron microscopy-energy dispersive X-ray spectrometer ...

    African Journals Online (AJOL)

    The distribution of arsenic (As) and cadmium (Cd) in himematsutake was analyzed using scanning electron microscopy-energy dispersive X-ray spectrometer (SEM-EDX). The atomic percentage of the metals was confirmed by inductively coupled plasma-mass spectrometer (ICP-MS). Results show that the accumulation of ...

  5. Challenges of scanning hall microscopy using batch fabricated probes

    NARCIS (Netherlands)

    Hatakeyama, Kodai

    2016-01-01

    Scanning Hall probe microscopy is a widely used technique for quantitative high resolution imaging of magnetic stray fields. Up to now probes with nanometer spatial resolution have only been realized by electron beam lithography, which is a slow and expensive fabrication technique. In this thesis,

  6. Nanochannel alignment analysis by scanning transmission ion microscopy

    DEFF Research Database (Denmark)

    Rajta, I.; Gál, G.A.B.; Szilasi, S.Z.

    2010-01-01

    In this paper a study on the ion transmission ratio of a nanoporous alumina sample is presented. The sample was investigated by scanning transmission ion microscopy (STIM) with different beam sizes. The hexagonally close-packed AlO nanocapillary array, realized as a suspended membrane of 15 νm...

  7. Scanning electron microscopy of Dermatobia hominis reveals cutaneous anchoring features.

    Science.gov (United States)

    Möhrenschlager, Matthias; Mempel, Martin; Weichenmeier, Ingrid; Engst, Reinhard; Ring, Johannnes; Behrendt, Heidrun

    2007-10-01

    We report the case of a 45-year-old Caucasian woman suffering from cutaneous myiasis. With the use of scanning electron microscopy, we placed special focus on the mechanisms by which Dermatobia hominis can fasten securely within the human skin.

  8. Ultrafast terahertz scanning tunneling microscopy with atomic resolution

    DEFF Research Database (Denmark)

    Jelic, Vedran; Iwaszczuk, Krzysztof; Nguyen, Peter H.

    2016-01-01

    We demonstrate that ultrafast terahertz scanning tunneling microscopy (THz-STM) can probe single atoms on a silicon surface with simultaneous sub-nanometer and sub-picosecond spatio-temporal resolution. THz-STM is established as a new technique for exploring high-field non-equilibrium tunneling...

  9. Characterization of Polycaprolactone Films Biodeterioration by Scanning Electron Microscopy

    Czech Academy of Sciences Publication Activity Database

    Hrubanová, Kamila; Voberková, S.; Hermanová, S.; Krzyžánek, Vladislav

    2014-01-01

    Roč. 20, S3 (2014), s. 1950-1951 ISSN 1431-9276 R&D Projects: GA MŠk EE.2.3.20.0103; GA MŠk(CZ) LO1212 Institutional support: RVO:68081731 Keywords : polycaprolactone films * biodeterioration * scanning electron microscopy Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.877, year: 2014

  10. Laser scan with upstream crystal #1

    CERN Document Server

    Gyr, Marcel

    1996-01-01

    A laser scan was performed with the new U-shaped crystal G5, which has a known miscut of +1 mrad and is installed at the upstream position #1 in the TEC. The aim was to cross-check the angular sensitivity of the stepping motor of the goniometer, which theoretically should be 1.98 µrad/step.

  11. Multiplatform Mobile Laser Scanning: Usability and Performance

    Directory of Open Access Journals (Sweden)

    Yuwei Chen

    2012-08-01

    Full Text Available Mobile laser scanning is an emerging technology capable of capturing three-dimensional data from surrounding objects. With state-of-the-art sensors, the achieved point clouds capture object details with good accuracy and precision. Many of the applications involve civil engineering in urban areas, as well as traffic and other urban planning, all of which serve to make 3D city modeling probably the fastest growing market segment in this field. This article outlines multiplatform mobile laser scanning solutions such as vehicle- and trolley-operated urban area data acquisition, and boat-mounted equipment for fluvial environments. Moreover, we introduce a novel backpack version of mobile laser scanning equipment for surveying applications in the field of natural sciences where the requirements include precision and mobility in variable terrain conditions. In addition to presenting a technical description of the systems, we discuss the performance of the solutions in the light of various applications in the fields of urban mapping and modeling, fluvial geomorphology, snow-cover characterization, precision agriculture, and in monitoring the effects of climate change on permafrost landforms. The data performance of the mobile laser scanning approach is described by the results of an evaluation of the ROAMER on a permanent MLS test field. Furthermore, an in situ accuracy assessment using a field of spherical 3D targets for the newly-introduced Akhka backpack system is conducted and reported on.

  12. Scanning laser microscope for biological investigations.

    Science.gov (United States)

    Davidovits, P; Egger, M D

    1971-07-01

    The theory and design of a special purpose scanning laser microscope are described. This microscope, particularly suited for biological investigations, is intended for the observation of objects embedded within transparent or translucent bodies, such as nerve cells in an intact brain. Some photographs made with a prototype are shown.

  13. Scanning tunneling microscopy III theory of STM and related scanning probe methods

    CERN Document Server

    Güntherodt, Hans-Joachim

    1996-01-01

    Scanning Tunneling Microscopy III provides a unique introduction to the theoretical foundations of scanning tunneling microscopy and related scanning probe methods. The different theoretical concepts developed in the past are outlined, and the implications of the theoretical results for the interpretation of experimental data are discussed in detail. Therefore, this book serves as a most useful guide for experimentalists as well as for theoreticians working in the filed of local probe methods. In this second edition the text has been updated and new methods are discussed.

  14. STED microscopy with a supercontinuum laser source.

    Science.gov (United States)

    Wildanger, Dominik; Rittweger, Eva; Kastrup, Lars; Hell, Stefan W

    2008-06-23

    We report on a straightforward yet powerful implementation of stimulated emission depletion (STED) fluorescence microscopy providing subdiffraction resolution in the far-field. Utilizing the same super-continuum pulsed laser source both for excitation and STED, this implementation of STED microscopy avoids elaborate preparations of laser pulses and conveniently provides multicolor imaging. Operating at pulse repetition rates around 1 MHz, it also affords reduced photobleaching rates by allowing the fluorophore to relax from excitable metastable dark states involved in photodegradation. The imaging of dense nanoparticles and of the microtubular network of mammalian cells evidences a spatial resolution of 30-50 nm in the focal plane, i.e. by a factor of 8-9 beyond the diffraction barrier.

  15. Cryo scanning electron microscopy of Plasmodium falciparum-infected erythrocytes.

    Science.gov (United States)

    Hempel, Casper

    2017-07-01

    Plasmodium falciparum invades erythrocytes as an essential part of their life cycle. While living inside erythrocytes, the parasite remodels the cell's intracellular organization as well as its outer surface. Late trophozoite-stage parasites and schizonts introduce numerous small protrusions on the erythrocyte surface, called knobs. Current methods for studying these knobs include atomic force microscopy and electron microscopy. Standard electron microscopy methods rely on chemical fixation and dehydration modifying cell size. Here, a novel method is presented using rapid freezing and scanning electron microscopy under cryogenic conditions allowing for high resolution and magnification of erythrocytes. This novel technique can be used for precise estimates of knob density and for studies on cytoadhesion. © 2017 APMIS. Published by John Wiley & Sons Ltd.

  16. Scanning electron microscopy evaluation of the interaction pattern between dentin and resin after cavity preparation using Er:YAG laser; Avaliacao, atraves de microscopia eletronica de varredura, do padrao de interacao dentina-resina em cavidades preparadas com laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Schein, Marcelo Thome

    2001-07-01

    The aim of this study was to describe the interaction pattern formed between dentin and resin on cavities prepared with an erbium laser (Er:YAG). The morphological aspect of the irradiated dentin after acid etching was also observed. Ten dentin disks were obtained from fresh extracted third molars. Each disk received two cavities, one prepared with a conventional high-speed drill, while the other cavity was obtained by the use of an Er:YAG laser (KaVo KEY Laser, KaVo Co.). The laser treatment was performed with 250 mJ/pulse, 4 Hz, non contact mode, focused beam, and a fine water mist was used. Five disks were prepared for morphological analysis of the acid etched dentin. The other five disks had their cavities restored with Single Bond (3M) followed by Z100 resin (3M). The specimens were observed under scanning electron microscopy after dentin-resin interface demineralization and deproteinization. It was observed that the morphological characteristics of the acid-etched irradiated dentin were not favorable to the diffusion of monomers through the collagen network. The dentin resin interfacial aspect of irradiated dentin, after acid etching, showed thin tags and scarce hybridization zones, which agreed with the morphology of the irradiated and acid-etched dentin substrate observed. (author)

  17. Surface morphology of Trichinella spiralis by scanning electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, C.W. (State Univ. of New York, Stony Brook); Ledbetter, M.C.

    1980-02-01

    The surface morphology of larval and adult Trichinella spiralis was studied by scanning electron microscopy (SEM) of fixed, dried, and metal-coated specimens. The results are compared with those found earlier by various investigators using light and transmission electron microscopy. Some morphological features reported here are revealed uniquely by SEM. These include the pores of the cephalic sense organs, the character of secondary cuticular folds, variations of the hypodermal gland cell openings or pores, and the presence of particles on the copulatory bell.

  18. Scanning conductance microscopy investigations on fixed human chromosomes

    DEFF Research Database (Denmark)

    Clausen, Casper Hyttel; Lange, Jacob Moresco; Jensen, Linda Boye

    2008-01-01

    Scanning conductance microscopy investigations were carried out in air on human chromosomes fixed on pre-fabricated SiO2 surfaces with a backgate. The point of the investigation was to estimate the dielectric constant of fixed human chromosomes in order to use it for microfluidic device...... optimization. The phase shift caused by the electrostatic forces, together with geometrical measurements of the atomic force microscopy (AFM) cantilever and the chromosomes were used to estimate a value,for the dielectric constant of different human chromosomes....

  19. Ultrafast Photon Counting Applied to Resonant Scanning STED Microscopy

    Science.gov (United States)

    Wu, Xundong; Toro, Ligia; Stefani, Enrico; Wu, Yong

    2014-01-01

    Summary To take full advantage of fast resonant scanning in super-resolution STimulated Emission Depletion (STED) microscopy, we have developed an ultrafast photon counting system based on a multi-giga-sample per second analog-to-digital conversion (ADC) chip that delivers an unprecedented 450 MHz pixel clock (2.2 ns pixel dwell time in each scan). The system achieves a large field of view (~50 × 50 μm) with fast scanning that reduces photobleaching, and advances the time-gated continuous wave (CW) STED technology to the usage of resonant scanning with hardware based time-gating. The assembled system provides superb signal-to-noise ratio and highly linear quantification of light that result in superior image quality. Also, the system design allows great flexibility in processing photon signals to further improve the dynamic range. In conclusion, we have constructed a frontier photon counting image acquisition system with ultrafast readout rate, excellent counting linearity, and with the capacity of realizing resonant-scanning CW-STED microscopy with on-line time-gated detection. PMID:25227160

  20. A correlative optical microscopy and scanning electron microscopy approach to locating nanoparticles in brain tumors.

    Science.gov (United States)

    Kempen, Paul J; Kircher, Moritz F; de la Zerda, Adam; Zavaleta, Cristina L; Jokerst, Jesse V; Mellinghoff, Ingo K; Gambhir, Sanjiv S; Sinclair, Robert

    2015-01-01

    The growing use of nanoparticles in biomedical applications, including cancer diagnosis and treatment, demands the capability to exactly locate them within complex biological systems. In this work a correlative optical and scanning electron microscopy technique was developed to locate and observe multi-modal gold core nanoparticle accumulation in brain tumor models. Entire brain sections from mice containing orthotopic brain tumors injected intravenously with nanoparticles were imaged using both optical microscopy to identify the brain tumor, and scanning electron microscopy to identify the individual nanoparticles. Gold-based nanoparticles were readily identified in the scanning electron microscope using backscattered electron imaging as bright spots against a darker background. This information was then correlated to determine the exact location of the nanoparticles within the brain tissue. The nanoparticles were located only in areas that contained tumor cells, and not in the surrounding healthy brain tissue. This correlative technique provides a powerful method to relate the macro- and micro-scale features visible in light microscopy with the nanoscale features resolvable in scanning electron microscopy. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Measuring Spatial Vibration Using Continuous Laser Scanning

    Directory of Open Access Journals (Sweden)

    Izhak Bucher

    2000-01-01

    Full Text Available This paper presents a method, which allows one to use a single point laser vibrometer as a continuous sensor measuring along a line or a 2D surface. The mathematical background of the curve-fitting procedure and the necessary signal processing allowing one to extract the amplitude of sinusoidal vibration are discussed. In the current work, use has been made with an ordinary laser interferometer equipped with glavanometer-based x, y mirros. This system is not designed for continuous scanning therefore some effort needs to be spent in order to overcome the dynamical characteristics of this system. The potential of such an instrument, as demonstrated in this work, may encourage the development of mechanically better scanning devices.

  2. Sub-Kelvin scanning tunneling microscopy on magnetic molecules

    OpenAIRE

    Zhang, Lei

    2012-01-01

    Magnetic molecules have attracted lots interest. In this work, an ultra-stable and low noise scanning tunneling microscopy operating at 400 mK using He-3 (930 mK using He-4) has been developed. The magnetic behavior of different magnetic molecules on substrates, especially the exchange interaction between the magnetic ions, the magnetic anisotropy on the surface, the magnetic excitations as well as the Kondo effect, were studied by using STM.

  3. Scanning Electron Microscopy of Cristispira Species in Chesapeake Bay Oysters

    OpenAIRE

    Tall, Ben D.; Nauman, Robert K.

    1981-01-01

    Scanning electron microscopy was employed to observe the physical interactions between Cristispira spp. and the crystalline style of the Chesapeake Bay oyster (Crassostrea virginica Gmelin 1791). Cristispira organisms were found associated with both the inner and outer layers of the posterior two-thirds of the style. The spirochetes possessed blunt-tipped ends, a cell diameter range of 0.6 to 0.8 μm, and distended spirochetal envelopes which followed the contour of the cells. Transmission ele...

  4. Playing peekaboo with graphene oxide: a scanning electrochemical microscopy investigation.

    Science.gov (United States)

    Rapino, Stefania; Treossi, Emanuele; Palermo, Vincenzo; Marcaccio, Massimo; Paolucci, Francesco; Zerbetto, Francesco

    2014-11-07

    Scanning electrochemical microscopy (SECM) can image graphene oxide (GO) flakes on insulating and conducting substrates. The contrast between GO and the substrate is controlled by the electrostatic interactions that are established between the charges of the molecular redox mediator and the charges present in the sheet/substrate. SECM also allows quantitative measurement - at the nano/microscale - of the charge transfer kinetics between single monolayer sheets and agent molecules.

  5. Scanning gate microscopy of ultra clean carbon nanotube quantum dots

    OpenAIRE

    Xue, Jiamin; Dhall, Rohan; Cronin, Stephen B.; LeRoy, Brian J.

    2015-01-01

    We perform scanning gate microscopy on individual suspended carbon nanotube quantum dots. The size and position of the quantum dots can be visually identified from the concentric high conductance rings. For the ultra clean devices used in this study, two new effects are clearly identified. Electrostatic screening creates non-overlapping multiple sets of Coulomb rings from a single quantum dot. In double quantum dots, by changing the tip voltage, the interactions between the quantum dots can b...

  6. Ultrafast axial scanning for two-photon microscopy via a digital micromirror device and binary holography.

    Science.gov (United States)

    Cheng, Jiyi; Gu, Chenglin; Zhang, Dapeng; Wang, Dien; Chen, Shih-Chi

    2016-04-01

    In this Letter, we present an ultrafast nonmechanical axial scanning method for two-photon excitation (TPE) microscopy based on binary holography using a digital micromirror device (DMD), achieving a scanning rate of 4.2 kHz, scanning range of ∼180  μm, and scanning resolution (minimum step size) of ∼270  nm. Axial scanning is achieved by projecting the femtosecond laser to a DMD programmed with binary holograms of spherical wavefronts of increasing/decreasing radii. To guide the scanner design, we have derived the parametric relationships between the DMD parameters (i.e., aperture and pixel size), and the axial scanning characteristics, including (1) maximum optical power, (2) minimum step size, and (3) scan range. To verify the results, the DMD scanner is integrated with a custom-built TPE microscope that operates at 60 frames per second. In the experiment, we scanned a pollen sample via both the DMD scanner and a precision z-stage. The results show the DMD scanner generates images of equal quality throughout the scanning range. The overall efficiency of the TPE system was measured to be ∼3%. With the high scanning rate, the DMD scanner may find important applications in random-access imaging or high-speed volumetric imaging that enables visualization of highly dynamic biological processes in 3D with submillisecond temporal resolution.

  7. Sagebrush Biomass Estimation Using Terrestrial Laser Scanning

    Science.gov (United States)

    Olsoy, P.; Glenn, N. F.; Clark, P. E.; Spaete, L.; Mitchell, J.; Shrestha, R.

    2012-12-01

    LiDAR (Light Detection and Ranging) is a proven tool for inventory of many vegetation types. Airborne laser scanning (ALS) has been demonstrated for estimation of biomass of trees, but the relatively low number of laser points (1-10 m-2) typical of ALS datasets makes estimating biomass of shrubs and small stature vegetation challenging. This study uses terrestrial laser scanning (TLS) to estimate sagebrush biomass (Artemisia tridentata subsp. wyomingensis) by relating destructively sampled estimates to TLS-derived volumetric estimates. At close range, TLS can commonly provide in excess of 100,000 3-D points for a single sagebrush of approximately 1 m3 in volume. In this study, thirty sagebrush were scanned and destructively sampled at 6 sites within Reynolds Creek Experimental Watershed in southwestern Idaho, USA. The 3-D point cloud data are converted into 1-cm voxels to give quantitative estimates of shrub volume. The accuracy of the TLS-based metrics for estimating biomass are then compared to several traditional plot sampling methods including point-intercept and simple crown dimension measurements. The findings of this study are expected to provide guidance on methods for data collection and analysis such that biomass can be accurately estimated across plot-scales (e.g., 100 m x 100 m).

  8. Abrasion of 6 dentifrices measured by vertical scanning interference microscopy

    Science.gov (United States)

    PASCARETTI-GRIZON, Florence; MABILLEAU, Guillaume; CHAPPARD, Daniel

    2013-01-01

    Objectives The abrasion of dentifrices is well recognized to eliminate the dental plaque. The aims of this study were to characterize the abrasive powders of 6 dentifrices (3 toothpastes and 3 toothpowders) and to measure the abrasion on a test surface by Vertical Scanning Interference microscopy (VSI). Material and Methods Bright field and polarization microscopy were used to identify the abrasive particles on the crude dentifrices and after prolonged washes. Scanning electron microscopy and microanalysis characterized the shape and nature of the particles. Standardized and polished blocks of poly(methylmethacrylate) were brushed with a commercial electric toothbrush with the dentifrices. VSI quantified the mean roughness (Ra) and illustrated in 3D the abraded areas. Results Toothpastes induced a limited abrasion. Toothpowders induced a significantly higher roughness linked to the size of the abrasive particles. One powder (Gencix® produced a high abrasion when used with a standard testing weight. However, the powder is based on pumice particles covered by a plant homogenate that readily dissolves in water. When used in the same volume, or after dispersion in water, Ra was markedly reduced. Conclusion Light and electron microscopy characterize the abrasive particles and VSI is a new tool allowing the analysis of large surface of abraded materials. PMID:24212995

  9. Abrasion of 6 dentifrices measured by vertical scanning interference microscopy.

    Science.gov (United States)

    Pascaretti-Grizon, Florence; Mabilleau, Guillaume; Chappard, Daniel

    2013-01-01

    The abrasion of dentifrices is well recognized to eliminate the dental plaque. The aims of this study were to characterize the abrasive powders of 6 dentifrices (3 toothpastes and 3 toothpowders) and to measure the abrasion on a test surface by Vertical Scanning Interference microscopy (VSI). Bright field and polarization microscopy were used to identify the abrasive particles on the crude dentifrices and after prolonged washes. Scanning electron microscopy and microanalysis characterized the shape and nature of the particles. Standardized and polished blocks of poly(methylmethacrylate) were brushed with a commercial electric toothbrush with the dentifrices. VSI quantified the mean roughness (Ra) and illustrated in 3D the abraded areas. Toothpastes induced a limited abrasion. Toothpowders induced a significantly higher roughness linked to the size of the abrasive particles. One powder (Gencix® produced a high abrasion when used with a standard testing weight. However, the powder is based on pumice particles covered by a plant homogenate that readily dissolves in water. When used in the same volume, or after dispersion in water, Ra was markedly reduced. Light and electron microscopy characterize the abrasive particles and VSI is a new tool allowing the analysis of large surface of abraded materials.

  10. Analysis of leaf surfaces using scanning ion conductance microscopy.

    Science.gov (United States)

    Walker, Shaun C; Allen, Stephanie; Bell, Gordon; Roberts, Clive J

    2015-05-01

    Leaf surfaces are highly complex functional systems with well defined chemistry and structure dictating the barrier and transport properties of the leaf cuticle. It is a significant imaging challenge to analyse the very thin and often complex wax-like leaf cuticle morphology in their natural state. Scanning electron microscopy (SEM) and to a lesser extent Atomic force microscopy are techniques that have been used to study the leaf surface but their remains information that is difficult to obtain via these approaches. SEM is able to produce highly detailed and high-resolution images needed to study leaf structures at the submicron level. It typically operates in a vacuum or low pressure environment and as a consequence is generally unable to deal with the in situ analysis of dynamic surface events at submicron scales. Atomic force microscopy also possess the high-resolution imaging required and can follow dynamic events in ambient and liquid environments, but can over exaggerate small features and cannot image most leaf surfaces due to their inherent roughness at the micron scale. Scanning ion conductance microscopy (SICM), which operates in a liquid environment, provides a potential complementary analytical approach able to address these issues and which is yet to be explored for studying leaf surfaces. Here we illustrate the potential of SICM on various leaf surfaces and compare the data to SEM and atomic force microscopy images on the same samples. In achieving successful imaging we also show that SICM can be used to study the wetting of hydrophobic surfaces in situ. This has potentially wider implications than the study of leaves alone as surface wetting phenomena are important in a range of fundamental and applied studies. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

  11. Phase-Modulation Laser Interference Microscopy

    DEFF Research Database (Denmark)

    Brazhe, Alexey; Brazhe, Nadezda; Maximov, G. V.

    2008-01-01

    We describe how phase-modulation laser interference microscopy and wavelet analysis can be applied to noninvasive nonstained visualization and study of the structural and dynamical properties of living cells. We show how phase images of erythrocytes can reveal the difference between various...... erythrocyte forms and stages of hemolysis and how phase images of neurons reveal their complex intracellular structure. Temporal variations of the refractive index are analyzed to detect cellular rhythmic activity on different time scales as well as to uncover interactions between the cellular processes....

  12. [Current application of confocal laser scanning microscope (CLSM) in stomatology].

    Science.gov (United States)

    Zhang, Yu-sen; Li, Ning-yi

    2007-04-01

    Confocal laser scanning microscopy is one kind of modern Hi-tech on the basis of confocal imaging which is characterized by depth discrimination capability. It has been widely used in the field of stomatology due to its great advantages of non-destructive and non-invasive optical sectioning and three-dimensional reconstruction of the vital objects, in situ and dynamic real-time observation of the tissues and cells can be performed at high resolution. This paper reviews the fundamentals of confocal imaging and the application of CLSM in the fields of dental material, caries, dentin bonding interface and other basic researches in stomatology in recent years.

  13. Microvascular quantification based on contour-scanning photoacoustic microscopy

    Science.gov (United States)

    Yeh, Chenghung; Soetikno, Brian; Hu, Song; Maslov, Konstantin I.; Wang, Lihong V.

    2014-09-01

    Accurate quantification of microvasculature remains of interest in fundamental pathophysiological studies and clinical trials. Current photoacoustic microscopy can noninvasively quantify properties of the microvasculature, including vessel density and diameter, with a high spatial resolution. However, the depth range of focus (i.e., focal zone) of optical-resolution photoacoustic microscopy (OR-PAM) is often insufficient to encompass the depth variations of features of interest-such as blood vessels-due to uneven tissue surfaces. Thus, time-consuming image acquisitions at multiple different focal planes are required to maintain the region of interest in the focal zone. We have developed continuous three-dimensional motorized contour-scanning OR-PAM, which enables real-time adjustment of the focal plane to track the vessels' profile. We have experimentally demonstrated that contour scanning improves the signal-to-noise ratio of conventional OR-PAM by as much as 41% and shortens the image acquisition time by 3.2 times. Moreover, contour-scanning OR-PAM more accurately quantifies vessel density and diameter, and has been applied to studying tumors with uneven surfaces.

  14. Patterned retinal coagulation with a scanning laser

    Science.gov (United States)

    Palanker, Daniel; Jain, ATul; Paulus, Yannis; Andersen, Dan; Blumenkranz, Mark S.

    2007-02-01

    Pan-retinal photocoagulation in patients with diabetic retinopathy typically involves application of more than 1000 laser spots; often resulting in physician fatigue and patient discomfort. We present a semi-automated patterned scanning laser photocoagulator that rapidly applies predetermined patterns of lesions; thus, greatly improving the comfort, efficiency and precision of the treatment. Patterns selected from a graphical user interface are displayed on the retina with an aiming beam, and treatment can be initiated and interrupted by depressing a foot pedal. To deliver a significant number of burns during the eye's fixation time, each pulse should be considerably shorter than conventional 100ms pulse duration. We measured coagulation thresholds and studied clinical and histological outcomes of the application of laser pulses in the range of 1-200ms in pigmented rabbits. Laser power required for producing ophthalmoscopically visible lesions with a laser spot of 132μm decreased from 360 to 37mW with pulse durations increasing from 1 to 100ms. In the range of 10-100ms clinically and histologically equivalent light burns could be produced. The safe therapeutic range of coagulation (ratio of the laser power required to produce a rupture to that for a light burn) decreased with decreasing pulse duration: from 3.8 at 100ms, to 3.0 at 20ms, to 2.5 at 10ms, and to 1.1 at 1ms. Histology demonstrated increased confinement of the thermal damage with shorter pulses, with coagulation zone limited to the photoreceptor layer at pulses shorter than 10ms. Durations of 10-20ms appear to be a good compromise between the speed and safety of retinal coagulation. Rapid application of multiple lesions greatly improves the speed, precision, and reduces pain in retinal photocoagulation.

  15. High Resolution Helium Ion Scanning Microscopy of the Rat Kidney

    Science.gov (United States)

    Rice, William L.; Van Hoek, Alfred N.; Păunescu, Teodor G.; Huynh, Chuong; Goetze, Bernhard; Singh, Bipin; Scipioni, Larry; Stern, Lewis A.; Brown, Dennis

    2013-01-01

    Helium ion scanning microscopy is a novel imaging technology with the potential to provide sub-nanometer resolution images of uncoated biological tissues. So far, however, it has been used mainly in materials science applications. Here, we took advantage of helium ion microscopy to explore the epithelium of the rat kidney with unsurpassed image quality and detail. In addition, we evaluated different tissue preparation methods for their ability to preserve tissue architecture. We found that high contrast, high resolution imaging of the renal tubule surface is possible with a relatively simple processing procedure that consists of transcardial perfusion with aldehyde fixatives, vibratome tissue sectioning, tissue dehydration with graded methanol solutions and careful critical point drying. Coupled with the helium ion system, fine details such as membrane texture and membranous nanoprojections on the glomerular podocytes were visualized, and pores within the filtration slit diaphragm could be seen in much greater detail than in previous scanning EM studies. In the collecting duct, the extensive and striking apical microplicae of the intercalated cells were imaged without the shrunken or distorted appearance that is typical with conventional sample processing and scanning electron microscopy. Membrane depressions visible on principal cells suggest possible endo- or exocytotic events, and central cilia on these cells were imaged with remarkable preservation and clarity. We also demonstrate the use of colloidal gold probes for highlighting specific cell-surface proteins and find that 15 nm gold labels are practical and easily distinguishable, indicating that external labels of various sizes can be used to detect multiple targets in the same tissue. We conclude that this technology represents a technical breakthrough in imaging the topographical ultrastructure of animal tissues. Its use in future studies should allow the study of fine cellular details and provide

  16. High resolution helium ion scanning microscopy of the rat kidney.

    Science.gov (United States)

    Rice, William L; Van Hoek, Alfred N; Păunescu, Teodor G; Huynh, Chuong; Goetze, Bernhard; Singh, Bipin; Scipioni, Larry; Stern, Lewis A; Brown, Dennis

    2013-01-01

    Helium ion scanning microscopy is a novel imaging technology with the potential to provide sub-nanometer resolution images of uncoated biological tissues. So far, however, it has been used mainly in materials science applications. Here, we took advantage of helium ion microscopy to explore the epithelium of the rat kidney with unsurpassed image quality and detail. In addition, we evaluated different tissue preparation methods for their ability to preserve tissue architecture. We found that high contrast, high resolution imaging of the renal tubule surface is possible with a relatively simple processing procedure that consists of transcardial perfusion with aldehyde fixatives, vibratome tissue sectioning, tissue dehydration with graded methanol solutions and careful critical point drying. Coupled with the helium ion system, fine details such as membrane texture and membranous nanoprojections on the glomerular podocytes were visualized, and pores within the filtration slit diaphragm could be seen in much greater detail than in previous scanning EM studies. In the collecting duct, the extensive and striking apical microplicae of the intercalated cells were imaged without the shrunken or distorted appearance that is typical with conventional sample processing and scanning electron microscopy. Membrane depressions visible on principal cells suggest possible endo- or exocytotic events, and central cilia on these cells were imaged with remarkable preservation and clarity. We also demonstrate the use of colloidal gold probes for highlighting specific cell-surface proteins and find that 15 nm gold labels are practical and easily distinguishable, indicating that external labels of various sizes can be used to detect multiple targets in the same tissue. We conclude that this technology represents a technical breakthrough in imaging the topographical ultrastructure of animal tissues. Its use in future studies should allow the study of fine cellular details and provide

  17. High resolution helium ion scanning microscopy of the rat kidney.

    Directory of Open Access Journals (Sweden)

    William L Rice

    Full Text Available Helium ion scanning microscopy is a novel imaging technology with the potential to provide sub-nanometer resolution images of uncoated biological tissues. So far, however, it has been used mainly in materials science applications. Here, we took advantage of helium ion microscopy to explore the epithelium of the rat kidney with unsurpassed image quality and detail. In addition, we evaluated different tissue preparation methods for their ability to preserve tissue architecture. We found that high contrast, high resolution imaging of the renal tubule surface is possible with a relatively simple processing procedure that consists of transcardial perfusion with aldehyde fixatives, vibratome tissue sectioning, tissue dehydration with graded methanol solutions and careful critical point drying. Coupled with the helium ion system, fine details such as membrane texture and membranous nanoprojections on the glomerular podocytes were visualized, and pores within the filtration slit diaphragm could be seen in much greater detail than in previous scanning EM studies. In the collecting duct, the extensive and striking apical microplicae of the intercalated cells were imaged without the shrunken or distorted appearance that is typical with conventional sample processing and scanning electron microscopy. Membrane depressions visible on principal cells suggest possible endo- or exocytotic events, and central cilia on these cells were imaged with remarkable preservation and clarity. We also demonstrate the use of colloidal gold probes for highlighting specific cell-surface proteins and find that 15 nm gold labels are practical and easily distinguishable, indicating that external labels of various sizes can be used to detect multiple targets in the same tissue. We conclude that this technology represents a technical breakthrough in imaging the topographical ultrastructure of animal tissues. Its use in future studies should allow the study of fine cellular details

  18. High-resolution low-dose scanning transmission electron microscopy.

    Science.gov (United States)

    Buban, James P; Ramasse, Quentin; Gipson, Bryant; Browning, Nigel D; Stahlberg, Henning

    2010-01-01

    During the past two decades instrumentation in scanning transmission electron microscopy (STEM) has pushed toward higher intensity electron probes to increase the signal-to-noise ratio of recorded images. While this is suitable for robust specimens, biological specimens require a much reduced electron dose for high-resolution imaging. We describe here protocols for low-dose STEM image recording with a conventional field-emission gun STEM, while maintaining the high-resolution capability of the instrument. Our findings show that a combination of reduced pixel dwell time and reduced gun current can achieve radiation doses comparable to low-dose TEM.

  19. Evaluation of the bleached human enamel by Scanning Electron Microscopy

    DEFF Research Database (Denmark)

    Miranda, Carolina Baptista; Pagani, Clovis; Benetti, Ana Raquel

    2005-01-01

    Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning...... Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure...

  20. [Pulmonary hydatidosis. Comparison of cytology and scanning electron microscopy].

    Science.gov (United States)

    Lavaud, F; Nou, J M; Sadrin, R; de Montreynaud, J M; Adnet, J J

    1986-01-01

    The puncture of a hydatid cyst with a fine needle is not generally recommended as a procedure and may even be contra-indicated in the first instance. Sometimes, however, the cytologist will be surprised to discover some scolices in the aspirate when the radiology is misleading, or not suggestive, and the serology is negative. We report two cases where the diagnosis was made by the cytological examination of the aspirate. The cytological study of the liquids was compared with electron microscopy scanning, enabling the stages of development of the parasite in the tissue of the pulmonary parenchyma to be assessed.

  1. Advanced Scanning Electron Microscopy and X Ray Microanalysis

    Science.gov (United States)

    Krinsley, David

    This text is the third in a group that evolved from a short course taught annually at Lehigh University, Bethlehem, Pa., since 1972. Chapters on magnetic contrast a nd electron channeling, dropped from the second volume for reasons of space, are included here along with new topics such as image processing. The first seven chapters should be oT value to those geologists interested in scanning electron microscopy (SEM) and microanalysis. Chapters 8 and 9, concerned with specimen preparation for biological SEM a nd cryomicroscopy, make up about one third of the text.

  2. Transfer functions in collection scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Vohnsen, Brian; Bozhevolnaya, Elena A.

    1999-01-01

    are considered with respect to the relation between near-field optical images and the corresponding intensity distributions. Our conclusions are supported with numerical simulations and experimental results obtained by using a photon scanning tunneling microscope with an uncoated fiber tip.......It is generally accepted that, if in collection near-field optical microscopy the probe-sample coupling can be disregarded, a fiber probe can be considered as a detector of the near-field intensity whose size can be accounted for via an intensity transfer function. We show that, in general...

  3. High-speed Lissajous-scan atomic force microscopy: Scan pattern planning and control design issues

    Science.gov (United States)

    Bazaei, A.; Yong, Yuen K.; Moheimani, S. O. Reza

    2012-06-01

    Tracking of triangular or sawtooth waveforms is a major difficulty for achieving high-speed operation in many scanning applications such as scanning probe microscopy. Such non-smooth waveforms contain high order harmonics of the scan frequency that can excite mechanical resonant modes of the positioning system, limiting the scan range and bandwidth. Hence, fast raster scanning often leads to image distortion. This paper proposes analysis and design methodologies for a nonlinear and smooth closed curve, known as Lissajous pattern, which allows much faster operations compared to the ordinary scan patterns. A simple closed-form measure is formulated for the image resolution of the Lissajous pattern. This enables us to systematically determine the scan parameters. Using internal model controllers (IMC), this non-raster scan method is implemented on a commercial atomic force microscope driven by a low resonance frequency positioning stage. To reduce the tracking errors due to actuator nonlinearities, higher order harmonic oscillators are included in the IMC controllers. This results in significant improvement compared to the traditional IMC method. It is shown that the proposed IMC controller achieves much better tracking performances compared to integral controllers when the noise rejection performances is a concern.

  4. Nanometrology using a through-focus scanning optical microscopy method

    Science.gov (United States)

    Attota, Ravikiran; Silver, Richard

    2011-02-01

    We present an initial review of a novel through-focus scanning optical microscopy (TSOM pronounced as 'tee-som') imaging method that produces nanometer-dimensional measurement sensitivity using a conventional bright-field optical microscope. In the TSOM method a target is scanned through the focus of an optical microscope, acquiring conventional optical images at different focal positions. The TSOM images are constructed using the through-focus optical images. A TSOM image is unique under given experimental conditions and is sensitive to changes in the dimensions of a target in a distinct way. We use this characteristic for nanoscale-dimensional metrology. This technique can be used to identify the dimension which is changing between two nanosized targets and to determine the dimensions using a library-matching method. This methodology has potential utility for a wide range of target geometries and application areas, including nanometrology, nanomanufacturing, defect analysis, inspection, process control and biotechnology.

  5. Quantitative phase imaging with scanning holographic microscopy: an experimental assessment.

    Science.gov (United States)

    Indebetouw, Guy; Tada, Yoshitaka; Leacock, John

    2006-11-28

    This paper demonstrates experimentally how quantitative phase information can be obtained in scanning holographic microscopy. Scanning holography can operate in both coherent and incoherent modes, simultaneously if desired, with different detector geometries. A spatially integrating detector provides an incoherent hologram of the object's intensity distribution (absorption and/or fluorescence, for example), while a point detector in a conjugate plane of the pupil provides a coherent hologram of the object's complex amplitude, from which a quantitative measure of its phase distribution can be extracted. The possibility of capturing simultaneously holograms of three-dimensional specimens, leading to three-dimensional reconstructions with absorption contrast, reflectance contrast, fluorescence contrast, as was previously demonstrated, and quantitative phase contrast, as shown here for the first time, opens up new avenues for multimodal imaging in biological studies.

  6. Elimination of periodic damped artifacts in scanning probe microscopy images

    Science.gov (United States)

    Chen, Yuhang; Huang, Wenhao

    2010-04-01

    When scanning probe microscopy (SPM) is operated at high scan rates, stripe-like artifacts will appear frequently in the SPM images. The removal of the image artifacts is highly demanded because they will distort the results in precise measurements. In this work, a method based on Prony analysis has been introduced to erase such periodic damped artifacts. Results demonstrate that this method prevails against the conventional fast Fourier transformation (FFT) method. Clean eliminations of the image artifacts are obtained, with almost no sacrifice of the detailed surface information. Even for arbitrary rough surfaces, the image artifacts can also be reduced by more than one order of magnitude. However, small amounts of stripes may still remain in the images. In these cases, the Prony analysis combined with locally weighted smoothing will provide better image quality. The artifacts reduction can have a meaning in the SPM-based visualization of dynamic phenomena with a nanoscale resolution.

  7. Quantitative phase imaging with scanning holographic microscopy: an experimental assesment

    Directory of Open Access Journals (Sweden)

    Tada Yoshitaka

    2006-11-01

    Full Text Available Abstract This paper demonstrates experimentally how quantitative phase information can be obtained in scanning holographic microscopy. Scanning holography can operate in both coherent and incoherent modes, simultaneously if desired, with different detector geometries. A spatially integrating detector provides an incoherent hologram of the object's intensity distribution (absorption and/or fluorescence, for example, while a point detector in a conjugate plane of the pupil provides a coherent hologram of the object's complex amplitude, from which a quantitative measure of its phase distribution can be extracted. The possibility of capturing simultaneously holograms of three-dimensional specimens, leading to three-dimensional reconstructions with absorption contrast, reflectance contrast, fluorescence contrast, as was previously demonstrated, and quantitative phase contrast, as shown here for the first time, opens up new avenues for multimodal imaging in biological studies.

  8. Synchronous-digitization for Video Rate Polarization Modulated Beam Scanning Second Harmonic Generation Microscopy.

    Science.gov (United States)

    Sullivan, Shane Z; DeWalt, Emma L; Schmitt, Paul D; Muir, Ryan M; Simpson, Garth J

    2015-03-09

    Fast beam-scanning non-linear optical microscopy, coupled with fast (8 MHz) polarization modulation and analytical modeling have enabled simultaneous nonlinear optical Stokes ellipsometry (NOSE) and linear Stokes ellipsometry imaging at video rate (15 Hz). NOSE enables recovery of the complex-valued Jones tensor that describes the polarization-dependent observables, in contrast to polarimetry, in which the polarization stated of the exciting beam is recorded. Each data acquisition consists of 30 images (10 for each detector, with three detectors operating in parallel), each of which corresponds to polarization-dependent results. Processing of this image set by linear fitting contracts down each set of 10 images to a set of 5 parameters for each detector in second harmonic generation (SHG) and three parameters for the transmittance of the fundamental laser beam. Using these parameters, it is possible to recover the Jones tensor elements of the sample at video rate. Video rate imaging is enabled by performing synchronous digitization (SD), in which a PCIe digital oscilloscope card is synchronized to the laser (the laser is the master clock.) Fast polarization modulation was achieved by modulating an electro-optic modulator synchronously with the laser and digitizer, with a simple sine-wave at 1/10th the period of the laser, producing a repeating pattern of 10 polarization states. This approach was validated using Z-cut quartz, and NOSE microscopy was performed for micro-crystals of naproxen.

  9. Synchronous-digitization for video rate polarization modulated beam scanning second harmonic generation microscopy

    Science.gov (United States)

    Sullivan, Shane Z.; DeWalt, Emma L.; Schmitt, Paul D.; Muir, Ryan D.; Simpson, Garth J.

    2015-03-01

    Fast beam-scanning non-linear optical microscopy, coupled with fast (8 MHz) polarization modulation and analytical modeling have enabled simultaneous nonlinear optical Stokes ellipsometry (NOSE) and linear Stokes ellipsometry imaging at video rate (15 Hz). NOSE enables recovery of the complex-valued Jones tensor that describes the polarization-dependent observables, in contrast to polarimetry, in which the polarization stated of the exciting beam is recorded. Each data acquisition consists of 30 images (10 for each detector, with three detectors operating in parallel), each of which corresponds to polarization-dependent results. Processing of this image set by linear fitting contracts down each set of 10 images to a set of 5 parameters for each detector in second harmonic generation (SHG) and three parameters for the transmittance of the fundamental laser beam. Using these parameters, it is possible to recover the Jones tensor elements of the sample at video rate. Video rate imaging is enabled by performing synchronous digitization (SD), in which a PCIe digital oscilloscope card is synchronized to the laser (the laser is the master clock.) Fast polarization modulation was achieved by modulating an electro-optic modulator synchronously with the laser and digitizer, with a simple sine-wave at 1/10th the period of the laser, producing a repeating pattern of 10 polarization states. This approach was validated using Z-cut quartz, and NOSE microscopy was performed for micro-crystals of naproxen.

  10. Re-scan confocal microscopy (RCM) improves the resolution of confocal microscopy and increases the sensitivity

    Science.gov (United States)

    De Luca, Giulia; Breedijk, Ronald; Hoebe, Ron; Stallinga, Sjoerd; Manders, Erik

    2017-03-01

    Re-scan confocal microscopy (RCM) is a new super-resolution technique based on a standard confocal microscope extended with a re-scan unit in the detection path that projects the emitted light onto a sensitive camera. In this paper the fundamental properties of RCM, lateral resolution, axial resolution and signal-to-noise ratio, are characterized and compared with properties of standard confocal microscopy. The results show that the lateral resolution of RCM is ~170 nm compared to ~240 nm of confocal microscopy for 488 nm excitation and 1.49 NA. As the theory predicts, this improved lateral resolution is independent of the pinhole diameter. In standard confocal microscopy, the same lateral resolution can only be achieved with an almost closed pinhole and, consequently, with a major loss of signal. We show that the sectioning capabilities of the standard confocal microscope are preserved in RCM and that the axial resolution of RCM is slightly better (~15%) than the standard confocal microscope. Furthermore, the signal-to-noise ratio in RCM is a factor of 2 higher than in standard confocal microscopy, also due to the use of highly sensitive modern cameras. In case the pinhole of a confocal microscope is adjusted in such way that the lateral resolution is comparable to that of RCM, the signal-to-noise ratio in RCM is 4 times higher than standard confocal microscopy. Therefore, RCM offers a good alternative to standard confocal microscopy for higher lateral resolution with the main advantage of strongly improved sensitivity.

  11. Simultaneous Scanning Ion Conductance Microscopy and Atomic Force Microscopy with Microchanneled Cantilevers.

    Science.gov (United States)

    Ossola, Dario; Dorwling-Carter, Livie; Dermutz, Harald; Behr, Pascal; Vörös, János; Zambelli, Tomaso

    2015-12-04

    We combined scanning ion conductance microscopy (SICM) and atomic force microscopy (AFM) into a single tool using AFM cantilevers with an embedded microchannel flowing into the nanosized aperture at the apex of the hollow pyramid. An electrode was positioned in the AFM fluidic circuit connected to a second electrode in the bath. We could thus simultaneously measure the ionic current and the cantilever bending (in optical beam deflection mode). First, we quantitatively compared the SICM and AFM contact points on the approach curves. Second, we estimated where the probe in SICM mode touches the sample during scanning on a calibration grid and applied the finding to image a network of neurites on a Petri dish. Finally, we assessed the feasibility of a double controller using both the ionic current and the deflection as input signals of the piezofeedback. The experimental data were rationalized in the framework of finite elements simulations.

  12. Humidity effects on scanning polarization force microscopy imaging

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Yue, E-mail: shenyue@isl.ac.cn [Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Key Laboratory of Salt Lake Resources Chemistry of Qinghai Province, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, Qinghai 810008 (China); Key Laboratory of Interfacial Physics and Technology of Chinese Academy of Sciences, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhou, Yuan, E-mail: zhouy@isl.ac.cn [Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Key Laboratory of Salt Lake Resources Chemistry of Qinghai Province, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, Qinghai 810008 (China); Sun, Yanxia; Zhang, Lijuan [Key Laboratory of Comprehensive and Highly Efficient Utilization of Salt Lake Resources, Key Laboratory of Salt Lake Resources Chemistry of Qinghai Province, Qinghai Institute of Salt Lakes, Chinese Academy of Sciences, Xining, Qinghai 810008 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Wang, Ying; Hu, Jun; Zhang, Yi [Key Laboratory of Interfacial Physics and Technology of Chinese Academy of Sciences, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2017-08-01

    Highlights: • The humidity dramatically affects the contrast of scanning polarization force microscopy (SPFM) imaging on mica surface. • This influence roots in the sensitive dielectric constant of mica surface to the humidity change. • A strategy of controllable and repeatable imaging the local dielectric properties of nanomaterials with SPFM is proposed. - Abstract: Scanning polarization force microscopy (SPFM) is a useful surface characterization technique to visually characterize and distinguish nanomaterial with different local dielectric properties at nanometer scale. In this paper, taking the individual one-atom-thick graphene oxide (GO) and reduced graphene oxide (rGO) sheets on mica as examples, we described the influences of environmental humidity on SPFM imaging. We found that the apparent heights (AHs) or contrast of SPFM imaging was influenced significantly by relative humidity (RH) at a response time of a few seconds. And this influence rooted in the sensitive dielectric constant of mica surface to the RH change. While dielectric properties of GO and rGO sheets were almost immune to the humidity change. In addition, we gave the method to determine the critical humidity at which the contrast conversion happened under different conditions. And this is important to the contrast control and repeatable imaging of SPFM through RH adjusting. These findings suggest a strategy of controllable and repeatable imaging the local dielectric properties of nanomaterials with SPFM, which is critically important for further distinguishment, manipulation, electronic applications, etc.

  13. Gold nanocone near-field scanning optical microscopy probes.

    Science.gov (United States)

    Fleischer, Monika; Weber-Bargioni, Alexander; Altoe, M Virginia P; Schwartzberg, Adam M; Schuck, P James; Cabrini, Stefano; Kern, Dieter P

    2011-04-26

    Near-field scanning optical microscopy enables the simultaneous topographical and subdiffraction limited optical imaging of surfaces. A process is presented for the implementation of single individually engineered gold cones at the tips of atomic force microscopy cantilevers. These cantilevers act as novel high-performance optical near-field probes. In the fabrication, thin-film metallization, electron beam induced deposition of etch masks, and Ar ion milling are combined. The cone constitutes a well-defined highly efficient optical antenna with a tip radius on the order of 10 nm and an adjustable plasmon resonance frequency. The sharp tip enables high resolution topographical imaging. By controllably varying the cone size, the resonance frequency can be adapted to the application of choice. Structural properties of these sharp-tipped probes are presented together with topographical images recorded with a cone probe. The antenna functionality is demonstrated by gathering the near-field enhanced Raman signature of individual carbon nanotubes with a gold cone scanning probe.

  14. Laser scanning of experimental solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Plunkett, B.C.; Lasswell, P.G.

    1980-01-01

    An instrument is described which measures and displays the response of the solar cell to a precisely positioned spot of HeNe laser light. By scanning the spot across the cell surface, one can create a map of the spatial variation in response of the cell. This map allows one to isolate flaws in cell contact integrity, locate open top surface grid lines, and evaluate fundamental junction performance. The system is useful for identifying and locating changes in the cell as it progresses through various experiments (e.g. stability studies). The laser scanner system is designed to be flexible and can accommodate different types of solar cell materials and a wide range of spot and scan sizes. Several modes of operation of the equipment are described, and results from two photovoltaic materials (CdS/Cu/sub 2/S and Zn/sub 3/P/sub 2/) are presented which demonstrate the capabilities of the system. Finally some of the proposed future uses of the system are discussed. 6 refs.

  15. MEMS scanned laser head-up display

    Science.gov (United States)

    Freeman, Mark O.

    2011-03-01

    Head-up displays (HUD) in automobiles and other vehicles have been shown to significantly reduce accident rates by keeping the driver's eyes on the road. The requirements for automotive HUDs are quite demanding especially in terms of brightness, dimming range, supplied power, and size. Scanned laser display technology is particularly well-suited to this application since the lasers can be very efficiently relayed to the driver's eyes. Additionally, the lasers are only turned on where the light is needed in the image. This helps to provide the required brightness while minimizing power and avoiding a background glow that disturbs the see-through experience. Microvision has developed a couple of HUD architectures that are presented herein. One design uses an exit pupil expander and relay optics to produce a high quality virtual image for built-in systems where the image appears to float above the hood of the auto. A second design uses a patented see-through screen technology and pico projector to make automotive HUDs available to anyone with a projector. The presentation will go over the basic designs for the two types of HUD and discuss design tradeoffs.

  16. Comparison of total-etch, self-etch, and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study.

    Science.gov (United States)

    Ozel, Emre; Tuna, Elif Bahar; Firatli, Sonmez; Firatli, Erhan

    2016-10-01

    The purpose of this study was to compare total-etch, self-etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group-1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group-2: laser preparation(lp)+(ASB)+(FZ); Group-3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group-4: lp+(CSBP) (FZ); Group-5: bp + acid etching+(CSBP)+(FZ); Group-6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5-55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal-Wallis and Mann-Whitney U tests (p  .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur. © 2016 Wiley Periodicals, Inc.

  17. Design and construction of a cost-efficient Arduino-based mirror galvanometer system for scanning optical microscopy

    Science.gov (United States)

    Hsu, Jen-Feng; Dhingra, Shonali; D'Urso, Brian

    2017-01-01

    Mirror galvanometer systems (galvos) are commonly employed in research and commercial applications in areas involving laser imaging, laser machining, laser-light shows, and others. Here, we present a robust, moderate-speed, and cost-efficient home-built galvo system. The mechanical part of this design consists of one mirror, which is tilted around two axes with multiple surface transducers. We demonstrate the ability of this galvo by scanning the mirror using a computer, via a custom driver circuit. The performance of the galvo, including scan range, noise, linearity, and scan speed, is characterized. As an application, we show that this galvo system can be used in a confocal scanning microscopy system.

  18. Immunolabeling for scanning electron microscopy (SEM) and field emission SEM.

    Science.gov (United States)

    Goldberg, Martin W

    2008-01-01

    Scanning electron microscopy (SEM) is a high resolution surface imaging technique. Many biological process and structures occur at surfaces and if antibodies are available, their components can be located within the surface structure. This is usually done in a similar way to immuno-fluorescence, using an unconjugated primary antibody followed by a tagged secondary antibody against the primary. In this case the tag is usually a colloidal gold particle instead of a fluorophore. Therefore it is quite straightforward to adapt an immuno-fluorescence procedure for SEM, as long as certain precautions are followed, as discussed here. Progressing from immuno-fluorescence, which essentially only indicates the position of a protein within the volume of a cell, to immuno-SEM, puts the labeling into the context of cellular structures. The principles and practices of sample preparation, labeling and imaging are described here.

  19. Ultramicrosensors based on transition metal hexacyanoferrates for scanning electrochemical microscopy

    Directory of Open Access Journals (Sweden)

    Maria A. Komkova

    2013-10-01

    Full Text Available We report here a way for improving the stability of ultramicroelectrodes (UME based on hexacyanoferrate-modified metals for the detection of hydrogen peroxide. The most stable sensors were obtained by electrochemical deposition of six layers of hexacyanoferrates (HCF, more specifically, an alternating pattern of three layers of Prussian Blue and three layers of Ni–HCF. The microelectrodes modified with mixed layers were continuously monitored in 1 mM hydrogen peroxide and proved to be stable for more than 5 h under these conditions. The mixed layer microelectrodes exhibited a stability which is five times as high as the stability of conventional Prussian Blue-modified UMEs. The sensitivity of the mixed layer sensor was 0.32 A·M−1·cm−2, and the detection limit was 10 µM. The mixed layer-based UMEs were used as sensors in scanning electrochemical microscopy (SECM experiments for imaging of hydrogen peroxide evolution.

  20. Cryo-Scanning Electron Microscopy of Captured Cirrus Ice Particles

    Science.gov (United States)

    Magee, N. B.; Boaggio, K.; Bandamede, M.; Bancroft, L.; Hurler, K.

    2016-12-01

    We present the latest collection of high-resolution cryo-scanning electron microscopy images and microanalysis of cirrus ice particles captured by high-altitude balloon (ICE-Ball, see abstracts by K. Boaggio and M. Bandamede). Ice particle images and sublimation-residues are derived from particles captured during approximately 15 balloon flights conducted in Pennsylvania and New Jersey over the past 12 months. Measurements include 3D digital elevation model reconstructions of ice particles, and associated statistical analyses of entire particles and particle sub-facets and surfaces. This 3D analysis reveals that morphologies of most ice particles captured deviate significantly from ideal habits, and display geometric complexity and surface roughness at multiple measureable scales, ranging from 100's nanometers to 100's of microns. The presentation suggests potential a path forward for representing scattering from a realistically complex array of ice particle shapes and surfaces.

  1. Local deposition of anisotropic nanoparticles using scanning electrochemical microscopy (SECM).

    Science.gov (United States)

    Fedorov, Roman G; Mandler, Daniel

    2013-02-28

    We demonstrate localized electrodeposition of anisotropic metal nanoobjects, namely Au nanorods (GNR), on indium tin oxide (ITO) using scanning electrochemical microscopy (SECM). A gold microelectrode was the source of the gold ions whereby double pulse chronoamperometry was employed to generate initially Au seeds which were further grown under controlled conditions. The distance between the microelectrode and the ITO surface as well as the different experimental parameters (electrodeposition regime, solution composition and temperature) were optimized to produce faceted gold seeds with the required characteristics (size and distribution). Colloidal chemical synthesis was successfully exploited for better understanding the role of the surfactant and different additives in breaking the crystallographic symmetry and anisotropic growth of GNR. Experiments performed in a conventional three-electrode cell revealed the most appropriate electrochemical conditions allowing high yield synthesis of nanorods with well-defined shape as well as nanocubes and bipyramids.

  2. Preparation of platinum/iridium scanning probe microscopy tips

    DEFF Research Database (Denmark)

    Sørensen, Alexis Hammer; Hvid, U.; Mortensen, M.W.

    1999-01-01

    material being etched is platinum/iridium (10%) the influence of the stop phase of the ac current terminating each pulse in the second etching is found to be negligible, while in the case of second etching of tungsten wires it is important to break the pulse in a certain phase to avoid formation of a thick...... of platinum from the wire surface and hereby give rise to "etching" of the wire. In the second etching blunt tips become sharp while tips which are already sharp apparently stay sharp. Therefore, the second etching scheme with pulses separated by pauses is found to be a very important factor...... for the production of sharp tips. After being etched the tips are ready for use in scanning tunneling microscopes, or they may be bent to form integrated tip/cantilever systems in ordinary commercial atomic force microscopes, being applicable as tapping mode tips and as electrostatic force microscopy tips. ©1999...

  3. Three-Dimensional scanning transmission electron microscopy of biological specimens

    KAUST Repository

    De Jonge, Niels

    2010-01-18

    A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2-3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original dataset. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy. However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved dataset. © 2010 Microscopy Society of America.

  4. Scanning Surface Potential Microscopy of Spore Adhesion on Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ida [University of Tennessee, Knoxville (UTK); Chung, Eunhyea [Georgia Institute of Technology; Kweon, Hyojin [Georgia Institute of Technology; Yiacoumi, Sotira [Georgia Institute of Technology; Tsouris, Costas [ORNL

    2012-01-01

    The adhesion of spores of Bacillus anthracis - the cause of anthrax and a likely biological threat - to solid surfaces is an important consideration in cleanup after an accidental or deliberate release. However, because of safety concerns, directly studying B. anthracis spores with advanced instrumentation is problematic. As a first step, we are examining the electrostatic potential of Bacillus thuringiensis (Bt), which is a closely related species that is often used as a simulant to study B. anthracis. Scanning surface potential microscopy (SSPM), also known as Kelvin probe force microscopy (KPFM), was used to investigate the influence of relative humidity (RH) on the surface electrostatic potential of Bt that had adhered to silica, mica, or gold substrates. AFM/SSPM side-by-side images were obtained separately in air, at various values of RH, after an aqueous droplet with spores was applied on each surface and allowed to dry before measurements. In the SSPM images, a negative potential on the surface of the spores was observed compared with that of the substrates. The surface potential decreased as the humidity increased. Spores were unable to adhere to a surface with an extremely negative potential, such as mica.

  5. Amyloid Structure and Assembly: Insights from Scanning Transmission Electron Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Goldsbury, C.; Wall, J.; Baxa, U.; Simon, M. N.; Steven, A. C.; Engel, A.; Aebi, U.; Muller, S. A.

    2011-01-01

    Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

  6. Scanning electron microscopy of the neuropathology of murine cerebral malaria

    Directory of Open Access Journals (Sweden)

    Brenneis Christian

    2006-11-01

    Full Text Available Abstract Background The mechanisms leading to death and functional impairments due to cerebral malaria (CM are yet not fully understood. Most of the knowledge about the pathomechanisms of CM originates from studies in animal models. Though extensive histopathological studies of the murine brain during CM are existing, alterations have not been visualized by scanning electron microscopy (SEM so far. The present study investigates the neuropathological features of murine CM by applying SEM. Methods C57BL/6J mice were infected with Plasmodium berghei ANKA blood stages. When typical symptoms of CM developed perfused brains were processed for SEM or light microscopy, respectively. Results Ultrastructural hallmarks were disruption of vessel walls, parenchymal haemorrhage, leukocyte sequestration to the endothelium, and diapedesis of macrophages and lymphocytes into the Virchow-Robin space. Villous appearance of observed lymphocytes were indicative of activated state. Cerebral oedema was evidenced by enlargement of perivascular spaces. Conclusion The results of the present study corroborate the current understanding of CM pathophysiology, further support the prominent role of the local immune system in the neuropathology of CM and might expose new perspectives for further interventional studies.

  7. Scanning electron microscopy physics of image formation and microanalysis

    CERN Document Server

    Reimer, Ludwig

    1985-01-01

    The aim of this book is to outline the physics of image formation, electron­ specimen interactions, imaging modes, the interpretation of micrographs and the use of quantitative modes "in scanning electron microscopy (SEM). lt forms a counterpart to Transmission Electron Microscopy (Vol. 36 of this Springer Series in Optical Sciences) . The book evolved from lectures delivered at the University of Münster and from a German text entitled Raster-Elektronenmikroskopie (Springer-Verlag), published in collaboration with my colleague Gerhard Pfefferkorn. In the introductory chapter, the principles of the SEM and of electron­ specimen interactions are described, the most important imaging modes and their associated contrast are summarized, and general aspects of eiemental analysis by x-ray and Auger electron emission are discussed. The electron gun and electron optics are discussed in Chap. 2 in order to show how an electron probe of small diameter can be formed, how the elec­ tron beam can be blanked at high fre...

  8. Water-Immersible MEMS scanning mirror designed for wide-field fast-scanning photoacoustic microscopy

    Science.gov (United States)

    Yao, Junjie; Huang, Chih-Hsien; Martel, Catherine; Maslov, Konstantin I.; Wang, Lidai; Yang, Joon-Mo; Gao, Liang; Randolph, Gwendalyn; Zou, Jun; Wang, Lihong V.

    2013-03-01

    By offering images with high spatial resolution and unique optical absorption contrast, optical-resolution photoacoustic microscopy (OR-PAM) has gained increasing attention in biomedical research. Recent developments in OR-PAM have improved its imaging speed, but have sacrificed either the detection sensitivity or field of view or both. We have developed a wide-field fast-scanning OR-PAM by using a water-immersible MEMS scanning mirror (MEMS-ORPAM). Made of silicon with a gold coating, the MEMS mirror plate can reflect both optical and acoustic beams. Because it uses an electromagnetic driving force, the whole MEMS scanning system can be submerged in water. In MEMS-ORPAM, the optical and acoustic beams are confocally configured and simultaneously steered, which ensures uniform detection sensitivity. A B-scan imaging speed as high as 400 Hz can be achieved over a 3 mm scanning range. A diffraction-limited lateral resolution of 2.4 μm in water and a maximum imaging depth of 1.1 mm in soft tissue have been experimentally determined. Using the system, we imaged the flow dynamics of both red blood cells and carbon particles in a mouse ear in vivo. By using Evans blue dye as the contrast agent, we also imaged the flow dynamics of lymphatic vessels in a mouse tail in vivo. The results show that MEMS-OR-PAM could be a powerful tool for studying highly dynamic and time-sensitive biological phenomena.

  9. Automatic change detection using mobile laser scanning

    Science.gov (United States)

    Hebel, M.; Hammer, M.; Gordon, M.; Arens, M.

    2014-10-01

    Automatic change detection in 3D environments requires the comparison of multi-temporal data. By comparing current data with past data of the same area, changes can be automatically detected and identified. Volumetric changes in the scene hint at suspicious activities like the movement of military vehicles, the application of camouflage nets, or the placement of IEDs, etc. In contrast to broad research activities in remote sensing with optical cameras, this paper addresses the topic using 3D data acquired by mobile laser scanning (MLS). We present a framework for immediate comparison of current MLS data to given 3D reference data. Our method extends the concept of occupancy grids known from robot mapping, which incorporates the sensor positions in the processing of the 3D point clouds. This allows extracting the information that is included in the data acquisition geometry. For each single range measurement, it becomes apparent that an object reflects laser pulses in the measured range distance, i.e., space is occupied at that 3D position. In addition, it is obvious that space is empty along the line of sight between sensor and the reflecting object. Everywhere else, the occupancy of space remains unknown. This approach handles occlusions and changes implicitly, such that the latter are identifiable by conflicts of empty space and occupied space. The presented concept of change detection has been successfully validated in experiments with recorded MLS data streams. Results are shown for test sites at which MLS data were acquired at different time intervals.

  10. Computer vision distortion correction of scanning probe microscopy images.

    Science.gov (United States)

    Gaponenko, Iaroslav; Tückmantel, Philippe; Ziegler, Benedikt; Rapin, Guillaume; Chhikara, Manisha; Paruch, Patrycja

    2017-04-06

    Since its inception, scanning probe microscopy (SPM) has established itself as the tool of choice for probing surfaces and functionalities at the nanoscale. Although recent developments in the instrumentation have greatly improved the metrological aspects of SPM, it is still plagued by the drifts and nonlinearities of the piezoelectric actuators underlying the precise nanoscale motion. In this work, we present an innovative computer-vision-based distortion correction algorithm for offline processing of functional SPM measurements, allowing two images to be directly overlaid with minimal error - thus correlating position with time evolution and local functionality. To demonstrate its versatility, the algorithm is applied to two very different systems. First, we show the tracking of polarisation switching in an epitaxial Pb(Zr0.2Ti0.8)O3 thin film during high-speed continuous scanning under applied tip bias. Thanks to the precise time-location-polarisation correlation we can extract the regions of domain nucleation and track the motion of domain walls until the merging of the latter in avalanche-like events. Secondly, the morphology of surface folds and wrinkles in graphene deposited on a PET substrate is probed as a function of applied strain, allowing the relaxation of individual wrinkles to be tracked.

  11. Scanning X-ray microscopy of superconductor/ferromagnet bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, Claudia; Ruoss, Stephen; Weigand, Markus; Schuetz, Gisela [Max Planck Institute for Intelligent Systems, Stuttgart (Germany); Zahn, Patrick; Bayer, Jonas [Max Planck Institute for Intelligent Systems, Stuttgart (Germany); Research Institute for Innovative Surfaces, FINO, Aalen University (Germany); Albrecht, Joachim [Research Institute for Innovative Surfaces, FINO, Aalen University (Germany)

    2016-07-01

    The magnetic flux distribution arising from a high-T{sub c} superconductor is detected and visualized with high spatial resolution using scanning x-ray microscopy (SXM). Therefore, we introduce a sensor layer, namely, an amorphous, soft-magnetic CoFeB cover layer. The magnetic stray fields of the supercurrents lead to a local reorientation of the magnetic moments in the ferromagnet, which is visualized using the large x-ray magnetic circular dichroism (XMCD) effect of the Co and Fe L3-edge. We show that the XMCD contrast in the sensor layer corresponds to the in-plane magnetic flux distribution of the superconductor and can hence be used to image magnetic structures in superconductors with high spatial resolution. Using the total electron yield (TEY) mode the surface structure and the magnetic domains can be imaged simultaneously and can be correlated. The measurements are carried out at our scanning x-ray microscope MAXYMUS at Bessy II, Berlin with the new low temperature setup.

  12. Wide-field Fourier ptychographic microscopy using laser illumination source

    Science.gov (United States)

    Chung, Jaebum; Lu, Hangwen; Ou, Xiaoze; Zhou, Haojiang; Yang, Changhuei

    2016-01-01

    Fourier ptychographic (FP) microscopy is a coherent imaging method that can synthesize an image with a higher bandwidth using multiple low-bandwidth images captured at different spatial frequency regions. The method’s demand for multiple images drives the need for a brighter illumination scheme and a high-frame-rate camera for a faster acquisition. We report the use of a guided laser beam as an illumination source for an FP microscope. It uses a mirror array and a 2-dimensional scanning Galvo mirror system to provide a sample with plane-wave illuminations at diverse incidence angles. The use of a laser presents speckles in the image capturing process due to reflections between glass surfaces in the system. They appear as slowly varying background fluctuations in the final reconstructed image. We are able to mitigate these artifacts by including a phase image obtained by differential phase contrast (DPC) deconvolution in the FP algorithm. We use a 1-Watt laser configured to provide a collimated beam with 150 mW of power and beam diameter of 1 cm to allow for the total capturing time of 0.96 seconds for 96 raw FPM input images in our system, with the camera sensor’s frame rate being the bottleneck for speed. We demonstrate a factor of 4 resolution improvement using a 0.1 NA objective lens over the full camera field-of-view of 2.7 mm by 1.5 mm. PMID:27896016

  13. Femtosecond Fiber Lasers Based on Dissipative Processes for Nonlinear Microscopy

    Science.gov (United States)

    Wise, Frank W.

    2012-01-01

    Recent progress in the development of femtosecond-pulse fiber lasers with parameters appropriate for nonlinear microscopy is reviewed. Pulse-shaping in lasers with only normal-dispersion components is briefly described, and the performance of the resulting lasers is summarized. Fiber lasers based on the formation of dissipative solitons now offer performance competitive with that of solid-state lasers, but with the benefits of the fiber medium. Lasers based on self-similar pulse evolution in the gain section of a laser also offer a combination of short pulse duration and high pulse energy that will be attractive for applications in nonlinear bioimaging. PMID:23869163

  14. Post-processing strategies in image scanning microscopy.

    Science.gov (United States)

    McGregor, J E; Mitchell, C A; Hartell, N A

    2015-10-15

    Image scanning microscopy (ISM) coupled with pixel reassignment offers a resolution improvement of √2 over standard widefield imaging. By scanning point-wise across the specimen and capturing an image of the fluorescent signal generated at each scan position, additional information about specimen structure is recorded and the highest accessible spatial frequency is doubled. Pixel reassignment can be achieved optically in real time or computationally a posteriori and is frequently combined with the use of a physical or digital pinhole to reject out of focus light. Here, we simulate an ISM dataset using a test image and apply standard and non-standard processing methods to address problems typically encountered in computational pixel reassignment and pinholing. We demonstrate that the predicted improvement in resolution is achieved by applying standard pixel reassignment to a simulated dataset and explore the effect of realistic displacements between the reference and true excitation positions. By identifying the position of the detected fluorescence maximum using localisation software and centring the digital pinhole on this co-ordinate before scaling around translated excitation positions, we can recover signal that would otherwise be degraded by the use of a pinhole aligned to an inaccurate excitation reference. This strategy is demonstrated using experimental data from a multiphoton ISM instrument. Finally we investigate the effect that imaging through tissue has on the positions of excitation foci at depth and observe a global scaling with respect to the applied reference grid. Using simulated and experimental data we explore the impact of a globally scaled reference on the ISM image and, by pinholing around the detected maxima, recover the signal across the whole field of view. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Metal particles in a ceramic matrix--scanning electron microscopy and transmission electron microscopy characterization.

    Science.gov (United States)

    Konopka, K

    2006-09-01

    This paper is concerned with ceramic matrix (Al(2)O(3)) composites with introduced metal particles (Ni, Fe). The composites were obtained via sintering of powders under very high pressure (2.5 GPa). Scanning electron microscopy and transmission electron microscopy were chosen as the tools for the identification and description of the shape, size and distribution of the metal particles. The Al(2)O(3)-Ni composite contained agglomerates of the Ni particles surrounded by ceramic grains and nanometre-size Ni particles located inside the ceramic grains and at the ceramic grain boundaries. In the Al(2)O(3)-Fe composite, the Fe particles were mostly surrounded by ceramic grains. Moreover, holes left by the Fe particles were found. The high pressure used in the fabrication of the composites changed the shape of the metal and ceramic powder grains via plastic deformation.

  16. Investigation of Nematode Diversity using Scanning Electron Microscopy and Fluorescent Microscopy

    Science.gov (United States)

    Seacor, Taylor; Howell, Carina

    2013-03-01

    Nematode worms account for the vast majority of the animals in the biosphere. They are colossally important to global public health as parasites, and to agriculture both as pests and as beneficial inhabitants of healthy soil. Amphid neurons are the anterior chemosensory neurons in nematodes, mediating critical behaviors including chemotaxis and mating. We are examining the cellular morphology and external anatomy of amphid neurons, using fluorescence microscopy and scanning electron microscopy, respectively, of a wide range of soil nematodes isolated in the wild. We use both classical systematics (e.g. diagnostic keys) and molecular markers (e.g. ribosomal RNA) to classify these wild isolates. Our ultimate aim is to build a detailed anatomical database in order to dissect genetic pathways of neuronal development and function across phylogeny and ecology. Research supported by NSF grants 092304, 0806660, 1058829 and Lock Haven University FPDC grants

  17. Scanning probe microscopy investigation of complex-oxide heterostructures

    Science.gov (United States)

    Bi, Feng

    Advances in the growth of precisely tailored complex-oxide heterostructures have led to new emergent behavior and associated discoveries. One of the most successful examples consists of an ultrathin layer of LaAlO 3 (LAO) deposited on TiO2-terminated SrTiO3 (STO), where a high mobility quasi-two dimensional electron liquid (2DEL) is formed at the interface. Such 2DEL demonstrates a variety of novel properties, including field tunable metal-insulator transition, superconductivity, strong spin-orbit coupling, magnetic and ferroelectric like behavior. Particularly, for 3-unit-cell (3 u.c.) LAO/STO heterostructures, it was demonstrated that a conductive atomic force microscope (c-AFM) tip can be used to "write" or "erase" nanoscale conducting channels at the interface, making LAO/STO a highly flexible platform to fabricate novel nanoelectronics. This thesis is focused on scanning probe microscopy studies of LAO/STO properties. We investigate the mechanism of c-AFM lithography over 3 u.c. LAO/STO in controlled ambient conditions by using a vacuum AFM, and find that the water molecules dissociated on the LAO surface play a critical role during the c-AFM lithography process. We also perform electro-mechanical response measurements over top-gated LAO/STO devices. Simultaneous piezoresponse force microscopy (PFM) and capacitance measurements reveal a correlation between LAO lattice distortion and interfacial carrier density, which suggests that PFM could not only serve as a powerful tool to map the carrier density at the interface but also provide insight into previously reported frequency dependence of capacitance enhancement of top-gated LAO/STO structures. To study magnetism at the LAO/STO interface, magnetic force microscopy (MFM) and magnetoelectric force microscopy (MeFM) are carried out to search for magnetic signatures that depend on the carrier density at the interface. Results demonstrate an electronicallycontrolled ferromagnetic phase on top-gated LAO

  18. Microscopic techniques bridging between nanoscale and microscale with an atomically sharpened tip - field ion microscopy/scanning probe microscopy/ scanning electron microscopy.

    Science.gov (United States)

    Tomitori, Masahiko; Sasahara, Akira

    2014-11-01

    Over a hundred years an atomistic point of view has been indispensable to explore fascinating properties of various materials and to develop novel functional materials. High-resolution microscopies, rapidly developed during the period, have taken central roles in promoting materials science and related techniques to observe and analyze the materials. As microscopies with the capability of atom-imaging, field ion microscopy (FIM), scanning tunneling microscopy (STM), atomic force microscopy (AFM) and transmission electron microscopy (TEM) can be cited, which have been highly evaluated as methods to ultimately bring forward the viewpoint of reductionism in materials science. On one hand, there have been difficulties to derive useful and practical information on large (micro) scale unique properties of materials using these excellent microscopies and to directly advance the engineering for practical materials. To make bridges over the gap between an atomic scale and an industrial engineering scale, we have to develop emergence science step-by-step as a discipline having hierarchical structures for future prospects by combining nanoscale and microscale techniques; as promising ways, the combined microscopic instruments covering the scale gap and the extremely sophisticated methods for sample preparation seem to be required. In addition, it is noted that spectroscopic and theoretical methods should implement the emergence science.Fundamentally, the function of microscope is to determine the spatial positions of a finite piece of material, that is, ultimately individual atoms, at an extremely high resolution with a high stability. To define and control the atomic positions, the STM and AFM as scanning probe microscopy (SPM) have successfully demonstrated their power; the technological heart of SPM lies in an atomically sharpened tip, which can be observed by FIM and TEM. For emergence science we would like to set sail using the tip as a base. Meanwhile, it is significant

  19. Effects of the copper vapour laser radiation in the root canal wall dentine: in vitro experiment using scanning electron microscopy and stereoscopy; Efeitos da radiacao laser de vapor de cobre na parede de dentina de canais radiculares: estudo in vitro por meio de microscopia eletronica de varredura e microscopio estereoscopico

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Maria Claudia Garcia da

    2001-07-01

    Ten human uniradicular teeth had their crown removed along the cement-enamel junction and right away a proper chemical-surgical preparation of the radicular canals was done; the roots were longitudinally sectioned in order to allow the irradiation of the surfaces of the root canals wall dentine. The hemi-roots were separated in two groups: group I (control), with four hemi-roots, not irradiated; and group II, with 16 hemi-roots, subdivided in four sub-groups submitted to the following exposition time: 0,02 s; 0,05 s; 0,1 s and 0,5 s. A copper vapour laser was used with a 510,6 nm wavelength, total average power of 11 W in green and yellow emissions; average power of 6,5 W in green emission; pulse repetition rate of 16.000 Hz and pulse duration of 30 ns. The pulse energy (green line) is 0,4 mJ and the peak power 13,5 W. The laser cavity is unstable type (R{sub 1}=3.900 mm and R{sub 2}-250 mm). The focusing have focal length lens f{sub 1}=250 mm and f{sub 2}=150 mm. The beam quality is of the M{sup 2}=5. The results obtained by scanning electron microscopy analysis showed the appearance of a cavity in the region of the laser beam incidence in the edges of this cavity, dentin was melt and resolidified presenting also cracks due to heat diffusion. Based on these results, we concluded that the size of the cavity formed in the dentin is directly proportional to the rate of exposure and, the more laser emission in the same area, more damage in the root canals wall dentin occurs. More studies need to be done with different exposition's time in order to obtain a safety protocol that does not cause injury in dental and support tissue. (author)

  20. Evaluation of 3-D laser scanning equipment : 2016 interim report.

    Science.gov (United States)

    2017-05-01

    As a follow-up to ICT Project R27-030, Evaluation of 3-D Laser Scanning, this report provides findings of an evaluation of 3-D laser : scanning equipment to determine the tangible costs versus benefits and the manpower savings realized by using the e...

  1. Automatic classification of trees from laser scanning point clouds

    NARCIS (Netherlands)

    Sirmacek, B.; Lindenbergh, R.C.

    2015-01-01

    Development of laser scanning technologies has promoted tree monitoring studies to a new level, as the laser scanning point clouds enable accurate 3D measurements in a fast and environmental friendly manner. In this paper, we introduce a probability matrix computation based algorithm for

  2. Dynamic experimentation on the confocal laser scanning microscope : application to soft-solid, composite food materials

    NARCIS (Netherlands)

    Plucknett, K.P.; Pomfret, S.J.; Normand, V.; Ferdinando, D.; Veerman, C.; Frith, W.J.; Norton, I.T.

    2001-01-01

    Confocal laser scanning microscopy (CLSM) is used to follow the dynamic structural evolution of several phase-separated mixed biopolymer gel composites. Two protein/polysaccharide mixed gel systems were examined: gelatin/maltodextrin and gelatin/agarose. These materials exhibit 'emulsion-like'

  3. 3D correlative light and electron microscopy of cultured cells using serial blockface scanning electron microscopy

    Science.gov (United States)

    Lerner, Thomas R.; Burden, Jemima J.; Nkwe, David O.; Pelchen-Matthews, Annegret; Domart, Marie-Charlotte; Durgan, Joanne; Weston, Anne; Jones, Martin L.; Peddie, Christopher J.; Carzaniga, Raffaella; Florey, Oliver; Marsh, Mark; Gutierrez, Maximiliano G.

    2017-01-01

    ABSTRACT The processes of life take place in multiple dimensions, but imaging these processes in even three dimensions is challenging. Here, we describe a workflow for 3D correlative light and electron microscopy (CLEM) of cell monolayers using fluorescence microscopy to identify and follow biological events, combined with serial blockface scanning electron microscopy to analyse the underlying ultrastructure. The workflow encompasses all steps from cell culture to sample processing, imaging strategy, and 3D image processing and analysis. We demonstrate successful application of the workflow to three studies, each aiming to better understand complex and dynamic biological processes, including bacterial and viral infections of cultured cells and formation of entotic cell-in-cell structures commonly observed in tumours. Our workflow revealed new insight into the replicative niche of Mycobacterium tuberculosis in primary human lymphatic endothelial cells, HIV-1 in human monocyte-derived macrophages, and the composition of the entotic vacuole. The broad application of this 3D CLEM technique will make it a useful addition to the correlative imaging toolbox for biomedical research. PMID:27445312

  4. Cryo-planing for cryo-scanning electron microscopy.

    Science.gov (United States)

    Nijsse, J; van Aelst, A C

    1999-01-01

    In the past decade, investigators of cryo-planing for low-temperature scanning electron microscopy (cryo-SEM) have developed techniques that enable observations of flat sample surfaces. This study reviews these sample preparation techniques, compares and contrasts their results, and introduces modifications that improve results from cryo-planing. A prerequisite for all successful cryo-planing required a stable attachment of the specimen to a holder. In most cases, clamping with a screw mechanism and using indium as space-filler sufficed. Once this problem was solved, any of three existing cryo-planing methods could be used to provide successful results: cryo-milling, microtomy in a cold room, and cryo-ultramicrotomy. This study introduces modifications to the cryo-planing technique that produces flat surfaces of any desired plane through a specimen. These flat surfaces of frozen, fully hydrated samples can be used to improve observations from cryo-SEM as well as to enhance results from x-ray microanalysis and (digital) image analysis. Cryo-planing results of chrysanthemum (Dendranthema x grandiflorum Tzvelev) stems, hazel (Corylus avelane L.) stems, and repeseed (Brassica napus L.) pistils are presented to illustrate the use of the planing method on fibrous, hard, and delicate materials, respectively.

  5. Non-thermal plasma mills bacteria: Scanning electron microscopy observations

    Energy Technology Data Exchange (ETDEWEB)

    Lunov, O., E-mail: lunov@fzu.cz; Churpita, O.; Zablotskii, V.; Jäger, A.; Dejneka, A. [Institute of Physics AS CR, Prague 18221 (Czech Republic); Deyneka, I. G.; Meshkovskii, I. K. [St. Petersburg State University of Information Technologies, Mechanics and Optics, St. Petersburg 197101 (Russian Federation); Syková, E. [Institute of Experimental Medicine AS CR, Prague 14220 (Czech Republic); Kubinová, Š. [Institute of Physics AS CR, Prague 18221 (Czech Republic); Institute of Experimental Medicine AS CR, Prague 14220 (Czech Republic)

    2015-02-02

    Non-thermal plasmas hold great promise for a variety of biomedical applications. To ensure safe clinical application of plasma, a rigorous analysis of plasma-induced effects on cell functions is required. Yet mechanisms of bacteria deactivation by non-thermal plasma remain largely unknown. We therefore analyzed the influence of low-temperature atmospheric plasma on Gram-positive and Gram-negative bacteria. Using scanning electron microscopy, we demonstrate that both Gram-positive and Gram-negative bacteria strains in a minute were completely destroyed by helium plasma. In contrast, mesenchymal stem cells (MSCs) were not affected by the same treatment. Furthermore, histopathological analysis of hematoxylin and eosin–stained rat skin sections from plasma–treated animals did not reveal any abnormalities in comparison to control ones. We discuss possible physical mechanisms leading to the shred of bacteria under non-thermal plasma irradiation. Our findings disclose how helium plasma destroys bacteria and demonstrates the safe use of plasma treatment for MSCs and skin cells, highlighting the favorability of plasma applications for chronic wound therapy.

  6. Band excitation method applicable to scanning probe microscopy

    Science.gov (United States)

    Jesse, Stephen [Knoxville, TN; Kalinin, Sergei V [Knoxville, TN

    2010-08-17

    Methods and apparatus are described for scanning probe microscopy. A method includes generating a band excitation (BE) signal having finite and predefined amplitude and phase spectrum in at least a first predefined frequency band; exciting a probe using the band excitation signal; obtaining data by measuring a response of the probe in at least a second predefined frequency band; and extracting at least one relevant dynamic parameter of the response of the probe in a predefined range including analyzing the obtained data. The BE signal can be synthesized prior to imaging (static band excitation), or adjusted at each pixel or spectroscopy step to accommodate changes in sample properties (adaptive band excitation). An apparatus includes a band excitation signal generator; a probe coupled to the band excitation signal generator; a detector coupled to the probe; and a relevant dynamic parameter extractor component coupled to the detector, the relevant dynamic parameter extractor including a processor that performs a mathematical transform selected from the group consisting of an integral transform and a discrete transform.

  7. Humidity effects on scanning polarization force microscopy imaging

    Science.gov (United States)

    Shen, Yue; Zhou, Yuan; Sun, Yanxia; Zhang, Lijuan; Wang, Ying; Hu, Jun; Zhang, Yi

    2017-08-01

    Scanning polarization force microscopy (SPFM) is a useful surface characterization technique to visually characterize and distinguish nanomaterial with different local dielectric properties at nanometer scale. In this paper, taking the individual one-atom-thick graphene oxide (GO) and reduced graphene oxide (rGO) sheets on mica as examples, we described the influences of environmental humidity on SPFM imaging. We found that the apparent heights (AHs) or contrast of SPFM imaging was influenced significantly by relative humidity (RH) at a response time of a few seconds. And this influence rooted in the sensitive dielectric constant of mica surface to the RH change. While dielectric properties of GO and rGO sheets were almost immune to the humidity change. In addition, we gave the method to determine the critical humidity at which the contrast conversion happened under different conditions. And this is important to the contrast control and repeatable imaging of SPFM through RH adjusting. These findings suggest a strategy of controllable and repeatable imaging the local dielectric properties of nanomaterials with SPFM, which is critically important for further distinguishment, manipulation, electronic applications, etc.

  8. Scanning reflection ion microscopy in a helium ion microscope

    Directory of Open Access Journals (Sweden)

    Yuri V. Petrov

    2015-05-01

    Full Text Available Reflection ion microscopy (RIM is a technique that uses a low angle of incidence and scattered ions to form an image of the specimen surface. This paper reports on the development of the instrumentation and the analysis of the capabilities and limitations of the scanning RIM in a helium ion microscope (HIM. The reflected ions were detected by their “conversion” to secondary electrons on a platinum surface. An angle of incidence in the range 5–10° was used in the experimental setup. It was shown that the RIM image contrast was determined mostly by surface morphology but not by the atomic composition. A simple geometrical analysis of the reflection process was performed together with a Monte Carlo simulation of the angular dependence of the reflected ion yield. An interpretation of the RIM image formation and a quantification of the height of the surface steps were performed. The minimum detectable step height was found to be approximately 5 nm. RIM imaging of an insulator surface without the need for charge compensation was successfully demonstrated.

  9. Breast tissue characterization with high-frequency scanning acoustic microscopy

    Science.gov (United States)

    Kumon, R. E.; Bruno, I.; Heartwell, B.; Maeva, E.

    2004-05-01

    We have performed imaging of breast tissue using scanning acoustic microscopy (SAM) in the range of 25-50 MHz with the goal of accurately and rapidly determining the structure and composition throughout the volume of the samples. In contrast to traditional histological slides, SAM images can be obtained without special preparation, sometimes even without sectioning, but with sufficiently high spatial resolution to give information comparable to surface optical images. As a result, the use of high-frequency SAM at the time of breast lumpectomy to identify disease-free margins has the potential to reduce reoperative rates, patient anxiety, and local recurrence. However, only limited work has been performed to characterize breast tissue in the frequency range above clinical ultrasound devices. The samples are 4-cm2-thick sections (2-3 mm) taken from mastectomies and preserved in formalin. They are placed between two plates and immersed in water during imaging. Attenuation images are acquired by focusing the acoustic beam at the top and bottom of the samples, although better results were obtained for bottom focusing. For purposes of comparison and identification of histological features, acoustical images will be presented along with optical images obtained from the same samples. [Work supported by CIHR.

  10. An overview on bioaerosols viewed by scanning electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Wittmaack, K. [GSF-National Research Centre for Environment and Health, Institute of Radiation Protection, 85758 Neuherberg (Germany)]. E-mail: wittmaack@gsf.de; Wehnes, H. [GSF-National Research Centre for Environment and Health, Institute of Pathology, 85758 Neuherberg (Germany); Heinzmann, U. [GSF-National Research Centre for Environment and Health, Institute of Pathology, 85758 Neuherberg (Germany); Agerer, R. [Ludwig-Maximilians University Munich, Department Biology, Biodiversity Research: Mycology, Menzinger Stasse 67, 80638 Munich (Germany)

    2005-06-15

    Bioaerosols suspended in ambient air were collected with single-stage impactors at a semiurban site in southern Germany during late summer and early autumn. Sampling was mostly carried out at a nozzle velocity of 35 m/s, corresponding to a minimum aerodynamic diameter (cut-off diameter) of aerosol particles of 0.8 {mu}m. The collected particles, sampled for short periods ({approx}15 min) to avoid pile-up, were characterized by scanning electron microscopy (SEM). The observed bioaerosols include brochosomes, fungal spores, hyphae, insect scales, hairs of plants and, less commonly, bacteria and epicuticular wax. Brochosomes, which serve as a highly water repellent body coating of leafhoppers, are hollow spheroids with diameters around 400 nm, resembling C{sub 60} or footballs (soccer balls). They are usually airborne not as individuals but in the form of large clusters containing up to 10,000 individual species or even more. Various types of spores and scales were observed, but assignment turned out be difficult due to the large number of fungi and insects from which they may have originated. Pollens were observed only once. The absence these presumably elastic particles suggests that they are frequently lost, at the comparatively high velocities, due to bounce-off from the nonadhesive impaction surfaces.

  11. Simplifying Electron Beam Channeling in Scanning Transmission Electron Microscopy (STEM).

    Science.gov (United States)

    Wu, Ryan J; Mittal, Anudha; Odlyzko, Michael L; Mkhoyan, K Andre

    2017-08-01

    Sub-angstrom scanning transmission electron microscopy (STEM) allows quantitative column-by-column analysis of crystalline specimens via annular dark-field images. The intensity of electrons scattered from a particular location in an atomic column depends on the intensity of the electron probe at that location. Electron beam channeling causes oscillations in the STEM probe intensity during specimen propagation, which leads to differences in the beam intensity incident at different depths. Understanding the parameters that control this complex behavior is critical for interpreting experimental STEM results. In this work, theoretical analysis of the STEM probe intensity reveals that intensity oscillations during specimen propagation are regulated by changes in the beam's angular distribution. Three distinct regimes of channeling behavior are observed: the high-atomic-number (Z) regime, in which atomic scattering leads to significant angular redistribution of the beam; the low-Z regime, in which the probe's initial angular distribution controls intensity oscillations; and the intermediate-Z regime, in which the behavior is mixed. These contrasting regimes are shown to exist for a wide range of probe parameters. These results provide a new understanding of the occurrence and consequences of channeling phenomena and conditions under which their influence is strengthened or weakened by characteristics of the electron probe and sample.

  12. Scanning electron microscopy of eggs of Sabethes cyaneus.

    Science.gov (United States)

    Santos-Mallet, Jacenir; Sarmento, Juliana Soares; Alencar, Jeronimo; Müller, Gerson Azulim; Oliveira, Eliana Medeiros; Foster, Woodbridge A; Marcondes, Carlos Brisola

    2013-03-01

    Mosquitoes of the Neotropical genus Sabethes, some species of which are yellow fever vectors, most often develop through the immature stages in tree holes. Sabethes eggs have not been previously characterized using scanning electron microscopy. Eggs of Sabethes cyaneus (length: 349.6 +/- 2.7 microm; width: 172.6 +/- 1.14 microm; n = 10) are almost biconical when examined from the top. From a lateral perspective 2 surfaces can be seen. One surface is smooth and more convex, whereas the other is less convex and partially covered by a network from which many fungiform tubercles arise. The micropyle is situated on the smooth surface of the pointed anterior tip and is surrounded by an irregular row of tubercles, some of which are leaf shaped. No structures possibly involved in adhesion to surfaces are visible. When hatching, the egg splits dorsoventrally approximately two-thirds of the length from the anterior end. The tubercles appear to be water repellent, and the more convex/smoother surface is downturned, and this position on water was confirmed by direct observation. The eggs float free on the water surface.

  13. Scanning electron microscopy applied to seed-borne fungi examination.

    Science.gov (United States)

    Alves, Marcelo de Carvalho; Pozza, Edson Ampélio

    2009-07-01

    The aim of this study was to test the standard scanning electron microscopy (SEM) as a potential alternative to study seed-borne fungi in seeds, by two different conditions of blotter test and water restriction treatment. In the blotter test, seeds were subjected to conditions that enabled pathogen growth and expression, whereas the water restriction method consisted in preventing seed germination during the incubation period, resulting in the artificial inoculation of fungi. In the first condition, seeds of common bean (Phaseolus vulgaris L.), maize (Zea mays L.), and cotton (Gossypium hirsutum L.) were submitted to the standard blotter test and then prepared and observed with SEM. In the second condition, seeds of cotton (G. hirsutum), soybean (Glycine max L.), and common bean (P. vulgaris L.) were, respectively, inoculated with Colletotrichum gossypii var. cephalosporioides, Colletotrichum truncatum, and Colletotrichum lindemuthianum by the water restriction technique, followed by preparation and observation with SEM. The standard SEM methodology was adopted to prepare the specimens. Considering the seeds submitted to the blotter test, it was possible to identify Fusarium sp. on maize, C. gossypii var. cephalosporioides, and Fusarium oxysporum on cotton, Aspergillus flavus, Penicillium sp., Rhizopus sp., and Mucor sp. on common bean. Structures of C. gossypii var. cephalosporioides, C. truncatum, and C. lindemuthianum were observed in the surface of inoculated seeds. (c) 2009 Wiley-Liss, Inc.

  14. [Scanning electron microscopy findings in titanium middle ear prostheses].

    Science.gov (United States)

    Schwager, K

    2000-12-01

    Titanium as a biomaterial in ossicular replacement has widely spread within the last couple of years. 23 prostheses (12 PORPs, partial ossicular replacement prostheses and 11 TORPs total ossicular replacement prostheses) removed during revision surgery were studied using scanning electron microscopy. The average implantation time was 8 (range 3-15) months. The specimens were investigated regarding tissue growth, epithelialization, inflammation and cellular signs of rejection. Only few prostheses were totally covered by connective tissue or epithelium due to technical problems in removing the implant and the covering tissue as one specimen. But this offered the possibility to study the interface at the edges where the tissue was torn off. The connective tissue looked unremarkable. Polygonal squamous epithelium was detected on several implants. Respiratory epithelium with ciliated cells and mucus producing goblet cells was seen in two specimens. In cases of cholesteatoma or protrusion the explanted prostheses showed typical rosette-like formation of hornifying squamous epithelium. According to underlying disease a lymphocytic infiltration could be seen. There were no cellular signs of incompatibility noticed neither macrophages nor foreign body giant cells. From these investigations titanium seems to be a favorable biomaterial for ossicular replacement with good acceptance also in an implantation site showing chronic inflammation.

  15. Visualization of laser tattoo removal treatment effects in a mouse model by two-photon microscopy

    Science.gov (United States)

    Jang, Won Hyuk; Yoon, Yeoreum; Kim, Wonjoong; Kwon, Soonjae; Lee, Seunghun; Song, Duke; Choi, Jong Woon; Kim, Ki Hean

    2017-01-01

    Laser tattoo removal is an effective method of eliminating tattoo particles in the skin. However, laser treatment cannot always remove the unwanted tattoo completely, and there are risks of either temporary or permanent side effects. Studies using preclinical animal models could provide detailed information on the effects of laser treatment in the skin, and might help to minimize side effects in clinical practices. In this study, two-photon microscopy (TPM) was used to visualize the laser treatment effects on tattoo particles in both phantom specimens and in vivo mouse models. Fluorescent tattoo ink was used for particle visualization by TPM, and nanosecond (ns) and picosecond (ps) lasers at 532 nm were used for treatment. In phantom specimens, TPM characterized the fragmentation of individual tattoo particles by tracking them before and after the laser treatment. These changes were confirmed by field emission scanning electron microscopy (FE-SEM). TPM was used to measure the treatment efficiency of the two lasers at different laser fluences. In the mouse model, TPM visualized clusters of tattoo particles in the skin and detected their fragmentation after the laser treatment. Longitudinal TPM imaging observed the migration of cells containing tattoo particles after the laser treatment. These results show that TPM may be useful for the assessment of laser tattoo removal treatment in preclinical studies. PMID:28856046

  16. Visualization of laser tattoo removal treatment effects in a mouse model by two-photon microscopy.

    Science.gov (United States)

    Jang, Won Hyuk; Yoon, Yeoreum; Kim, Wonjoong; Kwon, Soonjae; Lee, Seunghun; Song, Duke; Choi, Jong Woon; Kim, Ki Hean

    2017-08-01

    Laser tattoo removal is an effective method of eliminating tattoo particles in the skin. However, laser treatment cannot always remove the unwanted tattoo completely, and there are risks of either temporary or permanent side effects. Studies using preclinical animal models could provide detailed information on the effects of laser treatment in the skin, and might help to minimize side effects in clinical practices. In this study, two-photon microscopy (TPM) was used to visualize the laser treatment effects on tattoo particles in both phantom specimens and in vivo mouse models. Fluorescent tattoo ink was used for particle visualization by TPM, and nanosecond (ns) and picosecond (ps) lasers at 532 nm were used for treatment. In phantom specimens, TPM characterized the fragmentation of individual tattoo particles by tracking them before and after the laser treatment. These changes were confirmed by field emission scanning electron microscopy (FE-SEM). TPM was used to measure the treatment efficiency of the two lasers at different laser fluences. In the mouse model, TPM visualized clusters of tattoo particles in the skin and detected their fragmentation after the laser treatment. Longitudinal TPM imaging observed the migration of cells containing tattoo particles after the laser treatment. These results show that TPM may be useful for the assessment of laser tattoo removal treatment in preclinical studies.

  17. Tree Height Growth Measurement with Single-Scan Airborne, Static Terrestrial and Mobile Laser Scanning

    Directory of Open Access Journals (Sweden)

    Yi Lin

    2012-09-01

    Full Text Available This study explores the feasibility of applying single-scan airborne, static terrestrial and mobile laser scanning for improving the accuracy of tree height growth measurement. Specifically, compared to the traditional works on forest growth inventory with airborne laser scanning, two issues are regarded: “Can the new technique characterize the height growth for each individual tree?” and “Can this technique refine the minimum growth-discernable temporal interval further?” To solve these two puzzles, the sampling principles of the three laser scanning modes were first examined, and their error sources against the task of tree-top capturing were also analyzed. Next, the three-year growths of 58 Nordic maple trees (Crimson King for test were intermittently surveyed with one type of laser scanning each time and then analyzed by statistics. The evaluations show that the height growth of each individual tree still cannot be reliably characterized even by single-scan terrestrial laser scanning, and statistical analysis is necessary in this scenario. After Gaussian regression, it is found that the minimum temporal interval with distinguishable tree height growths can be refined into one month based on terrestrial laser scanning, far better than the two years deduced in the previous works based on airborne laser scanning. The associated mean growth was detected to be about 0.12 m. Moreover, the parameter of tree height generally under-estimated by airborne and even mobile laser scanning can be relatively revised by means of introducing static terrestrial laser scanning data. Overall, the effectiveness of the proposed technique is primarily validated.

  18. Avaliação morfológica da união entre adesivo/resina composta e dentina irradiada com laser Er:YAG e laser Nd:YAG: estudo comparativo por microscopia de varredura Morphological evaluation of the bonding between adhesive/composite resin and dentin irradiated with Er:YAG and Nd:YAG lasers: comparative study using scanning microscopy

    Directory of Open Access Journals (Sweden)

    Margareth ODA

    2001-12-01

    the best known method. However, alternative methods for treating the dentin surface have been discussed in the literature, including the utilization of some kinds of laser irradiation. The purpose of this research was to morphologically evaluate the bond between adhesive materials and the dentin treated with Er:YAG and Nd:YAG lasers, in a comparative study by means of scanning electron microscopy (SEM. Irradiation either substituted acid etching, or was associated to it. Recently extracted bovine incisors were utilized. They received class V cavity preparations and were restored with a bonding system and a light-cured composite resin. Meanwhile, some of the teeth underwent irradiation with Er:YAG laser or Nd:YAG laser before the application of the bonding agent and the composite resin. The samples were selected, prepared for SEM and submitted to morphological analysis. Data were registered in photomicrographs. Based on the microscopic observations, we concluded that only in the dentin surfaces submitted to irradiation with Er:YAG laser and to acid conditioning there was penetration of resin into the dentine. With the Nd:YAG laser treatment, there was only visual superposition of resin over the dentin surface, which suggests that there was only occlusion of the tubules, with characteristics of fusion in the superficial dentine.

  19. Improved Visualization of Vertebrate Nuclear Pore Complexes by Field Emission Scanning Electron Microscopy

    National Research Council Canada - National Science Library

    Shaulov, Lihi; Harel, Amnon

    2012-01-01

    Field emission scanning electron microscopy (FESEM) can provide high-resolution three-dimensional surface imaging of many biological structures, including nuclear envelopes and nuclear pore complexes (NPCs...

  20. Automated Quantitative Rare Earth Elements Mineralogy by Scanning Electron Microscopy

    Science.gov (United States)

    Sindern, Sven; Meyer, F. Michael

    2016-09-01

    Increasing industrial demand of rare earth elements (REEs) stems from the central role they play for advanced technologies and the accelerating move away from carbon-based fuels. However, REE production is often hampered by the chemical, mineralogical as well as textural complexity of the ores with a need for better understanding of their salient properties. This is not only essential for in-depth genetic interpretations but also for a robust assessment of ore quality and economic viability. The design of energy and cost-efficient processing of REE ores depends heavily on information about REE element deportment that can be made available employing automated quantitative process mineralogy. Quantitative mineralogy assigns numeric values to compositional and textural properties of mineral matter. Scanning electron microscopy (SEM) combined with a suitable software package for acquisition of backscatter electron and X-ray signals, phase assignment and image analysis is one of the most efficient tools for quantitative mineralogy. The four different SEM-based automated quantitative mineralogy systems, i.e. FEI QEMSCAN and MLA, Tescan TIMA and Zeiss Mineralogic Mining, which are commercially available, are briefly characterized. Using examples of quantitative REE mineralogy, this chapter illustrates capabilities and limitations of automated SEM-based systems. Chemical variability of REE minerals and analytical uncertainty can reduce performance of phase assignment. This is shown for the REE phases parisite and synchysite. In another example from a monazite REE deposit, the quantitative mineralogical parameters surface roughness and mineral association derived from image analysis are applied for automated discrimination of apatite formed in a breakdown reaction of monazite and apatite formed by metamorphism prior to monazite breakdown. SEM-based automated mineralogy fulfils all requirements for characterization of complex unconventional REE ores that will become

  1. Outwitting the series resistance in scanning spreading resistance microscopy.

    Science.gov (United States)

    Schulze, A; Cao, R; Eyben, P; Hantschel, T; Vandervorst, W

    2016-02-01

    The performance of nanoelectronics devices critically depends on the distribution of active dopants inside these structures. For this reason, dopant profiling has been defined as one of the major metrology challenges by the international technology roadmap of semiconductors. Scanning spreading resistance microscopy (SSRM) has evolved as one of the most viable approaches over the last decade due to its excellent spatial resolution, sensitivity and quantification accuracy. However, in case of advanced device architectures like fins and nanowires a proper measurement of the spreading resistance is often hampered by the increasing impact of parasitic series resistances (e.g. bulk series resistance) arising from the confined nature of the aforementioned structures. In order to overcome this limitation we report in this paper the development and implementation of a novel SSRM mode (fast Fourier transform-SSRM: FFT-SSRM) which essentially decouples the spreading resistance from parasitic series resistance components. We show that this can be achieved by a force modulation (leading to a modulated spreading resistance signal) in combination with a lock-in deconvolution concept. In this paper we first introduce the principle of operation of the technique. We discuss in detail the underlying physical mechanisms as well as the technical implementation on a state-of-the-art atomic force microscope (AFM). We demonstrate the performance of FFT-SSRM and its ability to remove substantial series resistance components in practice. Eventually, the possibility of decoupling the spreading resistance from the intrinsic probe resistance will be demonstrated and discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Environmental scanning electron microscopy observation of the ultrastructure of Demodex.

    Science.gov (United States)

    Jing, Xu; Shuling, Guo; Ying, Liu

    2005-12-01

    In this study, numbers of Demodex of hair follicles and sebaceous glands were prepared and the ultrastructure (especially the mouthparts) of Demodex was observed firstly with environmental scanning electron microscopy (ESEM). The most suitable treatment methods and optimal environmental condition for observing the genus samples were found. The samples were washed with detergent and rinsed with distilled water, and then were taken to the specimen stage, on which there was carbon adhesive tape, using special tools. When the temperature was at 5 degrees C and chamber pressure at 5 mbar respectively, the surface of the samples could be fully imaged without covering water or dehydration. The sample surfaces were plump and clear without postmortem changes and charging artifacts. Detailed information about each part of Demodex was observed by ESEM, and clear three-dimensional images were recorded. The mouthparts of D. folliculorum were composed of a complex set of structures, which included a round oral opening, a sharp oral needle, and a special hypostome that looked like a longitudinal spindle in the central position. On the end segment of palpus, there were seven strong palpal claws located on each side of the mouthparts. D. folliculorum had special piercing mouthparts, while the mouthparts of D. brevis were a simpler structure. We could not observe the oral needle of D. brevis, and there were only five pairs of palpal claws on the end segment of palpus. The offensive organs of Demodex resulted in its pathogenic effects. After studying hundreds of Demodex, we identified both female and male species of D. folliculorum, but only females of D. brevis in our sample. (c) 2005 Wiley-Liss, Inc.

  3. Microstructure and properties of laser clad coatings studied by orientation imaging microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ocelik, V.; Furar, I. [Department of Applied Physics, Materials Innovation Institute (M2i), University of Groningen, Nijenborgh 4, Groningen 9747 AG (Netherlands); De Hosson, J.Th.M., E-mail: j.t.m.de.hosson@rug.nl [Department of Applied Physics, Materials Innovation Institute (M2i), University of Groningen, Nijenborgh 4, Groningen 9747 AG (Netherlands)

    2010-12-15

    In this work orientation imaging microscopy (OIM), based on electron backscatter diffraction in scanning electron microscopy, was employed to examine in detail the relationship between laser cladding processing parameters and he properties and the microstructure of single and overlapping laser tracks. The study was performed on thick ({approx}1 mm) Co-based coatings prepared by 2 kW Nd:YAG laser cladding a 42CrMo4 steel substrate using different laser beam scanning speeds (1.0-15 mm s{sup -1}). It was found that the directional growth of individual primary grains led to the formation of a typical solidification fiber texture. The dependence of this texture on the processing speed and the shape of the solidification front were investigated in detail. Strong epitaxial growth of Co grains on austenitic steel substrate grains was found, which did not depend on the laser beam scanning velocity. During laser cladding a strong temperature gradient exists just below the coating-substrate interface that promotes the formation of a Greninger-Troiano orientation relationship between martensitic plates and the original austenitic grain inside the heat affected zone: {l_brace}1 1 1{r_brace}{sub {gamma}} {approx} 1{sup o} to {l_brace}1 1 0{r_brace}{sub {alpha}} and <1-bar 21-bar >{sub {gamma}} {approx} 2{sup o} to <11-bar 0>{sub {alpha}}. Relatively drastic changes in grain size at the internal coating interfaces did not exhibit sharp changes in microhardness.

  4. Scanning tunneling microscopy III theory of STM and related scanning probe methods

    CERN Document Server

    Güntherodt, Hans-Joachim

    1993-01-01

    While the first two volumes on Scanning Tunneling Microscopy (STM) and its related scanning probe (SXM) methods have mainly concentrated on intro­ ducing the experimental techniques, as well as their various applications in different research fields, this third volume is exclusively devoted to the theory of STM and related SXM methods. As the experimental techniques including the reproducibility of the experimental results have advanced, more and more theorists have become attracted to focus on issues related to STM and SXM. The increasing effort in the development of theoretical concepts for STM/SXM has led to considerable improvements in understanding the contrast mechanism as well as the experimental conditions necessary to obtain reliable data. Therefore, this third volume on STM/SXM is not written by theorists for theorists, but rather for every scientist who is not satisfied by just obtaining real­ space images of surface structures by STM/SXM. After a brief introduction (Chap. 1), N. D. Lang first co...

  5. Maritime Laser Scanning as the Source for Spatial Data

    Directory of Open Access Journals (Sweden)

    Szulwic Jakub

    2015-12-01

    Full Text Available The rapid development of scanning technology, especially mobile scanning, gives the possibility to collect spatial data coming from maritime measurement platforms and autonomous manned or unmanned vehicles. Presented solution is derived from the mobile scanning. However we should keep in mind that the specificity of laser scanning at sea and processing collected data should be in the form acceptable in Geographical Information Systems, especially typical for the maritime needs. At the same time we should be aware that data coming from maritime mobile scanning constitutes a new approach to the describing of maritime environment and brings a new perspective that is completely different than air and terrestrial scanning.

  6. The Observation of Martensite and Magnetic Domain Structures in Ni53Mn24Ga23 Shape Memory Alloys by Scanning Electron Acoustic Microscopy and Scanning Thermal Microscopy

    Science.gov (United States)

    Zhao, Kun-Yu; Zeng, Hua-Rong; Song, Hong-Zhang; Hui, Sen-Xing; Li, Guo-Rong; Yin, Qing-Rui

    2012-05-01

    We present observations of martensite variants and ferromagnetic domain structures of Ni53Mn24Ga23 ferromagnetic shape memory alloys with a pure tetragonal martensitic phase by using scanning electron acoustic microscopy (SEAM) and scanning thermal microscopy (SThM). Electron acoustic images show a polycrystalline morphology with martensite variants. Direct coincidence between crystallographic martensitic twin variants and magnetic domains is found. A domain-like structure, obtained by SThM, is firstly reported, and then confirmed by magnetic force microscopy (MFM). The experimental results will be helpful for investigating the local thermal properties of ferromagnets and understanding the relationship between martensite variants and magnetic domains.

  7. Observation of the sweating in lipstick by scanning electron microscopy.

    Science.gov (United States)

    Seo, S Y; Lee, I S; Shin, H Y; Choi, K Y; Kang, S H; Ahn, H J

    1999-06-01

    The relationship between the wax matrix in lipstick and sweating has been investigated by observing the change of size and shape of the wax matrix due to sweating by Scanning Electron Microscopy (SEM). For observation by SEM, a lipstick sample was frozen in liquid nitrogen. The oil in the lipstick was then extracted in cold isopropanol (-70 degrees C) for 1-3 days. After the isopropanol was evaporated, the sample was sputtered with gold and examined by SEM. The change of wax matrix underneath the surface from fine, uniform structure to coarse, nonuniform structure resulted from the caking of surrounding wax matrix. The oil underneath the surface migrated to the surface of lipstick with sweating; consequently the wax matrix in that region was rearranged into the coarse matrix. In case of flamed lipstick, sweating was delayed and the wax matrix was much coarser than that of the unflamed one. The larger wax matrix at the surface region was good for including oil. The effect of molding temperature on sweating was also studied. As the molding temperature rose, sweating was greatly reduced and the size of the wax matrix increased. It was found that sweating was influenced by the compatibility of wax and oil. A formula consisting of wax and oil that have good compatibility has a tendency to reduce sweating and increase the size of the wax matrix. When pigments were added to wax and oil, the size of the wax matrix was changed, but in all cases sweating was increased due to the weakening of the binding force between wax and oil. On observing the thick membrane of wax at the surface of lipstick a month after molding it was also found that sweating was influenced by ageing. In conclusion, the structure of the wax matrix at the surface region of lipstick was changed with the process of flaming, molding temperature, compatibility of wax and oil, addition of pigment, and ageing. In most cases, as the size of the wax matrix was increased, sweating was reduced and delayed.

  8. A confocal laser scanning microscopic study on thermoresponsive ...

    Indian Academy of Sciences (India)

    CdTe QDs composites using a fluorescence confocal laser scanning microscope. These composites have potential applications both in material science and biology. Keywords. Confocal ... of binary colloidal alloys and other soft matter systems.

  9. Power Measurements for Microvision, Inc., Aircrew Integrated Helmet System Scanning Laser Helmet-Mounted Display

    National Research Council Canada - National Science Library

    Rash, Clarence

    2002-01-01

    ...) technology based on scanning lasers. Under this program, Microvision, Inc., Bothell, Washington, has developed a scanning laser HMD prototype for use with the Aircrew Integrated Helmet System (AIHS...

  10. An edge sensitive 3D measurement using two directional laser stripes scanning with a laser projector

    Science.gov (United States)

    Li, Dong; Zhou, Xiang; Xu, Changda; Wang, Chao; Guo, Jiayu

    2017-09-01

    Laser scanning is widely used in on-line industrial 3D inspection, cultural heritage conservation and reverse engineering. However, in the traditional laser scanning, the most widely-used approach is based on the projection of a single directional laser stripe over an object. Because the width of the laser stripe is physically difficult to compress enough to be fine at the edge of the object, the traditional measurement method is not accurate for edge measurements. This paper proposes an edge sensitive 3D measurement system which is fast and accurate, using two directional laser stripes scanning with a laser projector. Scanning metal edge steps and complex surface edge with this system only require a single scanning to perform 3D reconstruction. So this scanning method has the advantages of high efficiency, high speed and edges with high precision.

  11. Imaging by in situ Scanning Tunnelling Microscopy and its Nanotechnological Perspectives

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov

    2002-01-01

    in the interpretation of the imaging procedure. Other methods of in situ Scanning Probe Microscopy (in situ SPM), such as in situ Scanning Force Microscopy (in situ AFM) are considered for the sake of comparison and they are applied to imaging of non-conducting systems. Major results include demonstration of atomic...

  12. High frame-rate multichannel beam-scanning microscopy based on Lissajous trajectories.

    Science.gov (United States)

    Sullivan, Shane Z; Muir, Ryan D; Newman, Justin A; Carlsen, Mark S; Sreehari, Suhas; Doerge, Chris; Begue, Nathan J; Everly, R Michael; Bouman, Charles A; Simpson, Garth J

    2014-10-06

    A simple beam-scanning optical design based on Lissajous trajectory imaging is described for achieving up to kHz frame-rate optical imaging on multiple simultaneous data acquisition channels. In brief, two fast-scan resonant mirrors direct the optical beam on a circuitous trajectory through the field of view, with the trajectory repeat-time given by the least common multiplier of the mirror periods. Dicing the raw time-domain data into sub-trajectories combined with model-based image reconstruction (MBIR) 3D in-painting algorithms allows for effective frame-rates much higher than the repeat time of the Lissajous trajectory. Since sub-trajectory and full-trajectory imaging are simply different methods of analyzing the same data, both high-frame rate images with relatively low resolution and low frame rate images with high resolution are simultaneously acquired. The optical hardware required to perform Lissajous imaging represents only a minor modification to established beam-scanning hardware, combined with additional control and data acquisition electronics. Preliminary studies based on laser transmittance imaging and polarization-dependent second harmonic generation microscopy support the viability of the approach both for detection of subtle changes in large signals and for trace-light detection of transient fluctuations.

  13. Nanolithography on hydrogen terminateed silicon by scanning probe microscopy

    NARCIS (Netherlands)

    Schönenberger, Christian; Kramer, Niels; Kramer, N.

    1996-01-01

    Scanning-probe microscopes (SPM), i.e. the scanning-tunneling and force microscopes, can be used to locally oxidize hydrogen-terminated silicon and hydrogenated amorphous silicon. Because of its reliability and potential for pattern transfer, this lithography process has found great attention and

  14. Speckle suppression in scanning laser display.

    Science.gov (United States)

    Yurlov, Victor; Lapchuk, Anatoly; Yun, Sangkyeong; Song, Jonghyeong; Yang, Haengseok

    2008-01-10

    The theory of speckle noise in a scanning beam is presented. The general formulas for the calculation of speckle contrast, which apply to any scanning display, are obtained. It is shown that the main requirement for successful speckle suppression in a scanning display is a narrow autocorrelation peak and low sidelobe level in the autocorrelation function of the complex amplitude distribution across a scanning light beam. The simple formulas for speckle contrast for a beam with a narrow autocorrelation function peak were obtained. It was shown that application of a diffractive optical element (DOE) with a Barker code phase shape could use only natural display scanning motion for speckle suppression. DOE with a Barker code phase shape has a small size and may be deposited on the light modulator inside the depth of the focus of the reflected beam area, and therefore, it does not need an additional image plane and complicated relay optics.

  15. A Video Rate Confocal Laser Beam Scanning Light Microscope Using An Image Dissector

    Science.gov (United States)

    Goldstein, Seth R.; Hubin, Thomas; Rosenthal, Scott; Washburn, Clayton

    1989-12-01

    A video rate confocal reflected light microscope with no moving parts has been developed. Return light from an acousto-optically raster scanned laser beam is imaged from the microscope stage onto the photocathode of an Image Dissector Tube (IDT). Confocal operation is achieved by appropriately raster scanning with the IDT x and y deflection coils so as to continuously "sample" that portion of the photocathode that is being instantaneously illuminated by the return image of the scanning laser spot. Optimum IDT scan parameters and geometric distortion correction parameters are determined under computer control within seconds and are then continuously applied to insure system alignment. The system is operational and reflected light images from a variety of objects have been obtained. The operating principle can be extended to fluorescence and transmission microscopy.

  16. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    OpenAIRE

    Jesse, S.; Chi, M.; Belianinov, A.; Beekman, C.; Kalinin, S. V.; Borisevich, A. Y.; Lupini, A. R.

    2016-01-01

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called ?big-data? methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient ima...

  17. Automated pressure scanning of tunable dye lasers

    Science.gov (United States)

    Gottscho, R. A.

    1985-04-01

    A method for the remote control of tunable laser frequency tuning is proposed in the framework of real-time monitoring of the chemistry and physics of plasma, combustion, and chemical vapor deposition reactions. The technique presented involves indirect frequency tuning and stabilization by direct control of the laser cavity pressure. The long-term drift in power, resulting from the grating and etalon misalignment is suggested to be correctable by using a second feedback circuit which would optimize laser power by finely tuning the etalon or grating. Experimental results obtained with a dye laser of Hansch type are included; a maximum variation in LIF signal of + or - 7 percent, which corresponds to a frequency drift of + or - 0.005/cm, over a 30-min interval was achieved. A block diagram of the feedback loop and the LIF apparatus are included.

  18. Spatial-spectral analysis of a laser scanning video system

    Science.gov (United States)

    Kapustin, A. A.; Razumovskii, V. N.; Iatsevich, G. B.

    1980-06-01

    A spatial-spectral analysis method is considered for a laser scanning video system with the phase processing of a received signal, on a modulation frequency. Distortions caused by the system are analyzed, and a general problem is reduced for the case of a cylindrical surface. The approach suggested can also be used for scanning microwave systems.

  19. Axial tomography in live cell laser microscopy

    Science.gov (United States)

    Richter, Verena; Bruns, Sarah; Bruns, Thomas; Weber, Petra; Wagner, Michael; Cremer, Christoph; Schneckenburger, Herbert

    2017-09-01

    Single cell microscopy in a three-dimensional (3-D) environment is reported. Cells are grown in an agarose culture gel, located within microcapillaries and observed from different sides after adaptation of an innovative device for sample rotation. Thus, z-stacks can be recorded by confocal microscopy in different directions and used for illustration in 3-D. This gives additional information, since cells or organelles that appear superimposed in one direction, may be well resolved in another one. The method is tested and validated with single cells expressing a membrane or a mitochondrially associated green fluorescent protein, or cells accumulating fluorescent quantum dots. In addition, axial tomography supports measurements of cellular uptake and distribution of the anticancer drug doxorubicin in the nucleus (2 to 6 h after incubation) or the cytoplasm (24 h). This paper discusses that upon cell rotation an enhanced optical resolution in lateral direction compared to axial direction can be utilized to obtain an improved effective 3-D resolution, which represents an important step toward super-resolution microscopy of living cells.

  20. Influence of laser frequency noise on scanning Fabry-Perot interferometer based laser Doppler velocimetry

    DEFF Research Database (Denmark)

    Rodrigo, Peter John; Pedersen, Christian

    2014-01-01

    n this work, we study the performance of a scanning Fabry-Perot interferometer based laser Doppler velocimeter (sFPILDV) and compare two candidate 1.5 um single-frequency laser sources for the system – a fiber laser (FL) and a semiconductor laser (SL). We describe a straightforward calibration...... procedure for the sFPI-LDV and investigate the effect of different degrees of laser frequency noise between the FL and the SL on the velocimeter’s performance...

  1. Applying Terrestrial Laser Scanning for Soil Surface Roughness Assessment

    Directory of Open Access Journals (Sweden)

    Milutin Milenković

    2015-02-01

    Full Text Available Terrestrial laser scanning can provide high-resolution, two-dimensional sampling of soil surface roughness. While previous studies demonstrated the usefulness of these roughness measurements in geophysical applications, questions about the number of required scans and their resolution were not investigated thoroughly. Here, we suggest a method to generate digital elevation models, while preserving the surface’s stochastic properties at high frequencies and additionally providing an estimate of their spatial resolution. We also study the impact of the number and positions of scans on roughness indices’ estimates. An experiment over a smooth and isotropic soil plot accompanies the analysis, where scanning results are compared to results from active triangulation. The roughness measurement conditions for ideal sampling are revisited and updated for diffraction-limited sampling valid for close-range laser scanning over smooth and isotropic soil roughness. Our results show that terrestrial laser scanning can be readily used for roughness assessment on scales larger than 5 cm, while for smaller scales, special processing is required to mitigate the effect of the laser beam footprint. Interestingly, classical roughness parametrization (correlation length, root mean square height (RMSh was not sensitive to these effects. Furthermore, comparing the classical roughness parametrization between one- and four-scan setups shows that the one-scan data can replace the four-scan setup with a relative loss of accuracy below 1% for ranges up to 3 m and incidence angles no larger than 50°, while two opposite scans can replace it over the whole plot. The incidence angle limit for the spectral slope is even stronger and is 40°. These findings are valid for scanning over smooth and isotropic soil roughness.

  2. Microstructures and Microhardness Properties of CMSX-4® Additively Fabricated Through Scanning Laser Epitaxy (SLE)

    Science.gov (United States)

    Basak, Amrita; Holenarasipura Raghu, Shashank; Das, Suman

    2017-10-01

    Epitaxial CMSX-4® deposition is achieved on CMSX-4® substrates through the scanning laser epitaxy (SLE) process. A thorough analysis is performed using various advanced material characterization techniques, namely high-resolution optical microscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction, and Vickers microhardness measurements, to characterize and compare the quality of the SLE-fabricated CMSX-4® deposits to the CMSX-4® substrates. The results show that the CMSX-4® deposits have smaller primary dendritic arm spacing, finer γ/γ' size, weaker elemental segregation, and higher microhardness compared to the investment cast CMSX-4® substrates. The results presented here demonstrate that CMSX-4® is an attractive material for laser-based AM processing and, therefore, can be used in the fabrication of gas turbine hot-section components through AM processing.

  3. Second-harmonic scanning optical microscopy of semiconductor quantum dots

    DEFF Research Database (Denmark)

    Vohnsen, B.; Bozhevolnyi, S.I.; Pedersen, K.

    2001-01-01

    Second-harmonic (SH) optical imaging of self-assembled InAlGaAs quantum dots (QD's) grown on a GaAs(0 0 1) substrate has been accomplished at room temperature by use of respectively a scanning far-field optical microscope in reflection mode and a scanning near-field optical microscope...... in transmission mode. In both cases the SH signal peaks at a pump wavelength of similar to 885 nm in correspondence to the maximum in the photoluminescence spectrum of the QD sample. SH near-field optical images exhibit spatial signal variations on a subwavelength scale that depend on the pump wavelength. We...

  4. HOVE-Wedge-Filtering of Geomorphologic Terrestrial Laser Scan Data

    Directory of Open Access Journals (Sweden)

    Helmut Panholzer

    2018-02-01

    Full Text Available Terrestrial laser scanning has become an important surveying technique in many fields such as natural hazard assessment. To analyse earth surface processes, it is useful to generate a digital terrain model originated from laser scan point cloud data. To determine the terrain surface as precisely as possible, it is often necessary to filter out points that do not represent the terrain surface. Examples are vegetation, vehicles, and animals. In mountainous terrain with a small-structured topography, filtering is very difficult. Here, automatic filtering solutions usually designed for airborne laser scan data often lead to unsatisfactory results. In this work, we further develop an existing approach for automated filtering of terrestrial laser scan data, which is based on the assumption that no other surface point can be located in the area above a direct line of sight between scanner and another measured point. By taking into account several environmental variables and a repetitive calculation method, the modified method leads to significantly better results. The root-mean-square-error (RSME for the same test measurement area could be reduced from 5.284 to 1.610. In addition, a new approach for filtering and interpolation of terrestrial laser scanning data is presented using a grid with horizontal and vertical angular data and the measurement length.

  5. Focusing and scanning microscopy with propagating surface plasmons

    NARCIS (Netherlands)

    Gjonaj, B.; Aulbach, Jochen; Johnson, P.M.; Mosk, Allard; Kuipers, L.; Lagendijk, Aart

    2013-01-01

    Here we demonstrate a novel surface plasmon polariton (SPP) microscope which is capable of imaging below the optical diffraction limit. A plasmonic lens, generated through phase-structured illumination, focuses SPPs down to their diffraction limit and scans the focus with steps as small as 10 nm.

  6. Scanning Emitter Lifetime Imaging Microscopy for Spontaneous Emission Control

    DEFF Research Database (Denmark)

    Frimmer, Martin; Chen, Yuntian; Koenderink, A. Femius

    2011-01-01

    We report an experimental technique to map and exploit the local density of optical states of arbitrary planar nanophotonic structures. The method relies on positioning a spontaneous emitter attached to a scanning probe deterministically and reversibly with respect to its photonic environment while...

  7. Apparent Barrier Height in Scanning Tunneling Microscopy Revisited

    DEFF Research Database (Denmark)

    Olesen, L.; Brandbyge, Mads; Sørensen, Mads Reinholdt

    1996-01-01

    The apparent barrier height phi(ap), that is, the rate of change of the logarithm of the conductance with tip-sample separation in a scanning tunneling microscope (STM), has been measured for Ni, Pt, and Au single crystal surfaces. The results show that phi(ap) is constant until point contact is ...

  8. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography

    Science.gov (United States)

    Jesse, S.; Chi, M.; Belianinov, A.; Beekman, C.; Kalinin, S. V.; Borisevich, A. Y.; Lupini, A. R.

    2016-05-01

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called “big-data” methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. However, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.

  9. Big Data Analytics for Scanning Transmission Electron Microscopy Ptychography.

    Science.gov (United States)

    Jesse, S; Chi, M; Belianinov, A; Beekman, C; Kalinin, S V; Borisevich, A Y; Lupini, A R

    2016-05-23

    Electron microscopy is undergoing a transition; from the model of producing only a few micrographs, through the current state where many images and spectra can be digitally recorded, to a new mode where very large volumes of data (movies, ptychographic and multi-dimensional series) can be rapidly obtained. Here, we discuss the application of so-called "big-data" methods to high dimensional microscopy data, using unsupervised multivariate statistical techniques, in order to explore salient image features in a specific example of BiFeO3 domains. Remarkably, k-means clustering reveals domain differentiation despite the fact that the algorithm is purely statistical in nature and does not require any prior information regarding the material, any coexisting phases, or any differentiating structures. While this is a somewhat trivial case, this example signifies the extraction of useful physical and structural information without any prior bias regarding the sample or the instrumental modality. Further interpretation of these types of results may still require human intervention. However, the open nature of this algorithm and its wide availability, enable broad collaborations and exploratory work necessary to enable efficient data analysis in electron microscopy.

  10. Fourier ptychographic microscopy at telecommunication wavelengths using a femtosecond laser

    Science.gov (United States)

    Ahmed, Ishtiaque; Alotaibi, Maged; Skinner-Ramos, Sueli; Dominguez, Daniel; Bernussi, Ayrton A.; de Peralta, Luis Grave

    2017-12-01

    We report the implementation of the Fourier Ptychographic Microscopy (FPM) technique, a phase retrieval technique, at telecommunication wavelengths using a low-coherence ultrafast pulsed laser source. High quality images, near speckle-free, were obtained with the proposed approach. We demonstrate that FPM can also be used to image periodic features through a silicon wafer.

  11. Simulation study of secondary electron images in scanning ion microscopy

    CERN Document Server

    Ohya, K

    2003-01-01

    The target atomic number, Z sub 2 , dependence of secondary electron yield is simulated by applying a Monte Carlo code for 17 species of metals bombarded by Ga ions and electrons in order to study the contrast difference between scanning ion microscopes (SIM) and scanning electron microscopes (SEM). In addition to the remarkable reversal of the Z sub 2 dependence between the Ga ion and electron bombardment, a fine structure, which is correlated to the density of the conduction band electrons in the metal, is calculated for both. The brightness changes of the secondary electron images in SIM and SEM are simulated using Au and Al surfaces adjacent to each other. The results indicate that the image contrast in SIM is much more sensitive to the material species and is clearer than that for SEM. The origin of the difference between SIM and SEM comes from the difference in the lateral distribution of secondary electrons excited within the escape depth.

  12. Optical characterication of probes for photon scanning tunnelling microscopy

    DEFF Research Database (Denmark)

    Vohnsen, Brian; Bozhevolnyi, Sergey I.

    1999-01-01

    The photon scanning tunnelling microscope is a well-established member of the family of scanning near-field optical microscopes used for optical imaging at the sub-wavelength scale. The quality of the probes, typically pointed uncoated optical fibres, used is however difficult to evaluate...... in a direct manner and has most often been inferred from the apparent quality of recorded optical images. Complicated near-field optical imaging characteristics, together with the possibility of topographically induced artefacts, however, has increased demands for a more reliable probe characterization...... technique. Here we present experimental results obtained for optical characterization of two different probes by imaging of a well-specified near-field intensity distribution at various spatial frequencies. In particular, we observe that a sharply pointed dielectric probe can be highly suitable for imaging...

  13. Video rate near-field scanning optical microscopy

    Science.gov (United States)

    Bukofsky, S. J.; Grober, R. D.

    1997-11-01

    The enhanced transmission efficiency of chemically etched near-field optical fiber probes makes it possible to greatly increase the scanning speed of near-field optical microscopes. This increase in system bandwidth allows sub-diffraction limit imaging of samples at video rates. We demonstrate image acquisition at 10 frames/s, rate-limited by mechanical resonances in our scanner. It is demonstrated that the optical signal to noise ratio is large enough for megahertz single pixel acquisition rates.

  14. Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses.

    Science.gov (United States)

    Lorenz, Kathrine Osborn; Kakkassery, Joseph; Boree, Danielle; Pinto, David

    2014-09-01

    Limbal ring (also known as 'circle') contact lenses are becoming increasingly popular, especially in Asian markets because of their eye-enhancing effects. The pigment particles that give the eye-enhancing effects of these lenses can be found on the front or back surface of the contact lens or 'enclosed' within the lens matrix. The purpose of this research was to evaluate the pigment location and surface roughness of seven types of 'circle' contact lenses. Scanning electron microscopic (SEM) analysis was performed using a variable pressure Hitachi S3400N instrument to discern the placement of lens pigments. Atomic force microscopy (Dimension Icon AFM from Bruker Nano) was used to determine the surface roughness of the pigmented regions of the contact lenses. Atomic force microscopic analysis was performed in fluid phase under contact mode using a Sharp Nitride Lever probe (SNL-10) with a spring constant of 0.06 N/m. Root mean square (RMS) roughness values were analysed using a generalised linear mixed model with a log-normal distribution. Least square means and their corresponding 95% confidence intervals were estimated for each brand, location and pigment combination. SEM cross-sectional images at 500× and 2,000× magnification showed pigment on the surface of six of the seven lens types tested. The mean depth of pigment for 1-DAY ACUVUE DEFINE (1DAD) lenses was 8.1 μm below the surface of the lens, while the remaining lens types tested had pigment particles on the front or back surface. Results of the atomic force microscopic analysis indicated that 1DAD lenses had significantly lower root mean square roughness values in the pigmented area of the lens than the other lens types tested. SEM and AFM analysis revealed pigment on the surface of the lens for all types tested with the exception of 1DAD. Further research is required to determine if the difference in pigment location influences on-eye performance. © 2014 The Authors. Clinical and Experimental

  15. Contribution of Metal Layer Thickness for Quantitative Backscattered Electron Imaging of Field Emission Scanning Electron Microscopy

    National Research Council Canada - National Science Library

    Kim, Hyonchol; Takei, Hiroyuki; Negishi, Tsutomu; Kudo, Masato; Terazono, Hideyuki; Yasuda, Kenji

    2012-01-01

    ...) imaging in field emission scanning electron microscopy (FE-SEM) were studied to evaluate the potential of using these particles as simultaneously distinguishable labels of target molecules in FE-SEM studies...

  16. Quantitative detection of gold nanoparticles on individual, unstained cancer cells by Scanning Electron Microscopy

    NARCIS (Netherlands)

    Hartsuiker, Liesbeth; van Es, Peter; Petersen, Wilhelmina; van Leeuwen, Ton; Terstappen, Leonardus Wendelinus Mathias Marie; Otto, Cornelis

    2011-01-01

    Gold nanoparticles are rapidly emerging for use in biomedical applications. Characterization of the interaction and delivery of nanoparticles to cells through microscopy is important. Scanning electron microscopes have the intrinsic resolution to visualize gold nanoparticles on cells. A novel sample

  17. Combination of scanning probe microscopy techniques for evaluating the electrical parameters of individual multiwalled carbon nanotubes

    Science.gov (United States)

    Sokolov, D. V.; Davletkildeev, N. A.; Bolotov, V. V.; Lobov, I. A.

    2017-10-01

    Using two techniques of scanning probe microscopy, the electrical properties (work function, Fermi level position, free carriers’ concentration, electrical resistance, conductivity, and carriers’ mobility) of individual multiwalled carbon nanotubes were evaluated.

  18. Fluorescence microscopy.

    Science.gov (United States)

    Sanderson, Michael J; Smith, Ian; Parker, Ian; Bootman, Martin D

    2014-10-01

    Fluorescence microscopy is a major tool with which to monitor cell physiology. Although the concepts of fluorescence and its optical separation using filters remain similar, microscope design varies with the aim of increasing image contrast and spatial resolution. The basics of wide-field microscopy are outlined to emphasize the selection, advantages, and correct use of laser scanning confocal microscopy, two-photon microscopy, scanning disk confocal microscopy, total internal reflection, and super-resolution microscopy. In addition, the principles of how these microscopes form images are reviewed to appreciate their capabilities, limitations, and constraints for operation. © 2014 Cold Spring Harbor Laboratory Press.

  19. STREET-SCENE TREE SEGMENTATION FROM MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    H. Guan

    2016-06-01

    Full Text Available Our work addresses the problem of extracting trees from mobile laser scanning data. The work is a two step-wise strategy, including terrain point removal and tree segmentation. First, a voxel-based upward growing filtering is proposed to remove terrain points from the mobile laser scanning data. Then, a tree segmentation is presented to extract individual trees via a Euclidean distance clustering approach and Voxel-based Normalized Cut (VNCut segmentation approach. A road section data acquired by a RIEGL VMX-450 system are selected for evaluating the proposed tree segmentation method. Qualitative analysis shows that our algorithm achieves a good performance.

  20. Holographic Video Disc And Laser Scanning Optics.

    Science.gov (United States)

    Weingartner, I.; Rosenbruch, K. J.

    1983-10-01

    Holographic optical elements or systems of holographic elements may replace glass optical imaging systems or may be used for the correction of glass optics. The main advantages of such systems are their low weight, small and compact construction, and their simple and inexpensive manufacture. The disadvantages to be overcome are mainly the low light through-put and chromatic aberrations. In the special case of optics for video discs we present an optical imaging system which is capable of giving the required high resolution for illumination with polychromatic radiation of limited bandwidth in the case of semiconductor laser diodes. Optimization programs based on ray tracing yield highly corrected imaging systems by comparably simple holographic means. The use of only two surfaces gives very compact and lightweight systems, the image quality of which is described for monochromatic and polychro-matic irradiance by means of optical transfer functions. The holograms are recorded on photo-resist material with short wavelength laser radiation. Such holograms have almost no scatter light and do not alter their properties with time or under radiation. These holograms generate wavefronts for the correction of aberrations which, in the case of glass optics, could only be achieved by aspherical surfaces.

  1. Time-resolved scanning electron microscopy with polarization analysis

    Energy Technology Data Exchange (ETDEWEB)

    Frömter, Robert, E-mail: rfroemte@physik.uni-hamburg.de; Oepen, Hans Peter [Institut für Nanostruktur-und Festkörperphysik, Universität Hamburg, Jungiusstraße 11, 20355 Hamburg (Germany); The Hamburg Centre for Ultrafast Imaging, Luruper Chaussee 149, 22761 Hamburg (Germany); Kloodt, Fabian; Rößler, Stefan; Frauen, Axel; Staeck, Philipp; Cavicchia, Demetrio R. [Institut für Nanostruktur-und Festkörperphysik, Universität Hamburg, Jungiusstraße 11, 20355 Hamburg (Germany); Bocklage, Lars [Deutsches Elektronen-Synchrotron DESY, Notkestraße 85, 22607 Hamburg (Germany); The Hamburg Centre for Ultrafast Imaging, Luruper Chaussee 149, 22761 Hamburg (Germany); Röbisch, Volker; Quandt, Eckhard [Institute for Materials Science, Christian-Albrechts-Universität zu Kiel, 24143 Kiel (Germany)

    2016-04-04

    We demonstrate the feasibility of investigating periodically driven magnetization dynamics in a scanning electron microscope with polarization analysis based on spin-polarized low-energy electron diffraction. With the present setup, analyzing the time structure of the scattering events, we obtain a temporal resolution of 700 ps, which is demonstrated by means of imaging the field-driven 100 MHz gyration of the vortex in a soft-magnetic FeCoSiB square. Owing to the efficient intrinsic timing scheme, high-quality movies, giving two components of the magnetization simultaneously, can be recorded on the time scale of hours.

  2. Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Grigg, D.A.; Russell, P.E.; Dow, T.A.

    1988-12-01

    Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

  3. Scanning transmission electron microscopy: Albert Crewe's vision and beyond.

    Science.gov (United States)

    Krivanek, Ondrej L; Chisholm, Matthew F; Murfitt, Matthew F; Dellby, Niklas

    2012-12-01

    Some four decades were needed to catch up with the vision that Albert Crewe and his group had for the scanning transmission electron microscope (STEM) in the nineteen sixties and seventies: attaining 0.5Å resolution, and identifying single atoms spectroscopically. With these goals now attained, STEM developments are turning toward new directions, such as rapid atomic resolution imaging and exploring atomic bonding and electronic properties of samples at atomic resolution. The accomplishments and the future challenges are reviewed and illustrated with practical examples. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. [Scanning electron microscopy of heat-damaged bone tissue].

    Science.gov (United States)

    Harsanyl, L

    1977-02-01

    Parts of diaphyses of bones were exposed to high temperature of 200-1300 degrees C. Damage to the bone tissue caused by the heat was investigated. The scanning electron microscopic picture seems to be characteristic of the temperature applied. When the bones heated to the high temperature of 700 degrees C characteristic changes appear on the periostal surface, higher temperatura on the other hand causes damage to the compact bone tissue and can be observed on the fracture-surface. Author stresses the importance of this technique in the legal medicine and anthropology.

  5. Evaluation of the bleached human enamel by Scanning Electron Microscopy

    DEFF Research Database (Denmark)

    Miranda, Carolina Baptista; Pagani, Clovis; Benetti, Ana Raquel

    2005-01-01

    Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning...... characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel...

  6. Special raster scanning for reduction of charging effects in scanning electron microscopy.

    Science.gov (United States)

    Suzuki, Kazuhiko; Oho, Eisaku

    2014-01-01

    A special raster scanning (SRS) method for reduction of charging effects is developed for the field of SEM. Both a conventional fast scan (horizontal direction) and an unusual scan (vertical direction) are adopted for acquiring raw data consisting of many sub-images. These data are converted to a proper SEM image using digital image processing techniques. About sharpness of the image and reduction of charging effects, the SRS is compared with the conventional fast scan (with frame-averaging) and the conventional slow scan. Experimental results show the effectiveness of SRS images. By a successful combination of the proposed scanning method and low accelerating voltage (LV)-SEMs, it is expected that higher-quality SEM images can be more easily acquired by the considerable reduction of charging effects, while maintaining the resolution. © 2013 Wiley Periodicals, Inc.

  7. Control and analysis software for a laser scanning microdensitometer

    Indian Academy of Sciences (India)

    improve the beam quality of the laser. Light transmitted through the film falls on a photocell and output of the photocell is given to a voltage amplifier. The film to be scanned is placed on a glass slide and its movement is controlled by a translational stage driven by a stepper motor. It can scan in both X and Y directions up to ...

  8. Advantages of environmental scanning electron microscopy in studies of microorganisms.

    Science.gov (United States)

    Collins, S P; Pope, R K; Scheetz, R W; Ray, R I; Wagner, P A; Little, B J

    1993-08-01

    Microorganisms, including bacteria, fungi, protozoa, and microalgae, are composed predominantly of water which prohibits direct observation in a traditional scanning electron microscope (SEM). Preparation for SEM requires that microorganisms be fixed, frozen or dehydrated, and coated with a conductive film before observation in a high vacuum environment. Sample preparation may mechanically disturb delicate samples, compromise morphological information, and introduce other artifacts. The environmental scanning electron microscope (ESEM) provides a technology for imaging hydrated or dehydrated biological samples with minimal manipulation and without the need for conductive coatings. Sporulating cultures of three fungi, Aspergillus sp., Cunninghamella sp., and Mucor sp., were imaged in the ESEM to assess usefulness of the instrument in the direct observation of delicate, uncoated, biological specimens. Asexual sporophores showed no evidence of conidial displacement or disruption of sporangia. Uncoated algal cells of Euglena gracilis and Spirogyra sp. were examined using the backscatter electron detector (BSE) and the environmental secondary electron detector (ESD) of the ESEM. BSE images had more clearly defined intracellular structures, whereas ESD gave a clearer view of the surface E. gracilis cells fixed with potassium permanganate, Spirogyra sp. stained with Lugol's solution, and Saprolegnia sp. fixed with osmium tetroxide were compared using BSE and ESD to demonstrate that cellular details could be enhanced by the introduction of heavy metals. The effect of cellular water on signal quality was evaluated by comparing hydrated to critical point dried specimens.

  9. In-situ Scanning Transmission X-Ray Microscopy of Catalytic Solids and Related Nanomaterials

    NARCIS (Netherlands)

    de Groot, F.M.F.; de Smit, E.; van Schooneveld, M.M.; Aramburo, L.R.; Weckhuysen, B.M.

    2013-01-01

    The present status of in-situ scanning transmission X-ray microscopy (STXM) is reviewed, with an emphasis on the abilities of the STXM technique in comparison with electron microscopy. The experimental aspects and interpretation of X-ray absorption spectroscopy (XAS) are briefly introduced and the

  10. Core/shell nanofiber characterization by Raman scanning microscopy

    Science.gov (United States)

    Sfakis, Lauren; Sharikova, Anna; Tuschel, David; Costa, Felipe Xavier; Larsen, Melinda; Khmaladze, Alexander; Castracane, James

    2017-01-01

    Core/shell nanofibers are becoming increasingly popular for applications in tissue engineering. Nanofibers alone provide surface topography and increased surface area that promote cellular attachment; however, core/shell nanofibers provide the versatility of incorporating two materials with different properties into one. Such synthetic materials can provide the mechanical and degradation properties required to make a construct that mimics in vivo tissue. Many variations of these fibers can be produced. The challenge lies in the ability to characterize and quantify these nanofibers post fabrication. We developed a non-invasive method for the composition characterization and quantification at the nanoscale level of fibers using Confocal Raman microscopy. The biodegradable/biocompatible nanofibers, Poly (glycerol-sebacate)/Poly (lactic-co-glycolic) (PGS/PLGA), were characterized as a part of a fiber scaffold to quickly and efficiently analyze the quality of the substrate used for tissue engineering. PMID:28271000

  11. RIGOROUS POINT-TO-PLANE REGISTRATION OF TERRESTRIAL LASER SCANS

    Directory of Open Access Journals (Sweden)

    D. Grant

    2012-07-01

    Full Text Available Terrestrial laser scanning data that are acquired from multiple scan locations need to be registered before any 3D modeling and/or analysis is conducted. This paper presents a rigorous point-to-plane registration approach that minimizes the distances between two overlapping laser scans, using the General Least Squares adjustment model. The proposed approach falls under the class of fine registration and does not require any targets or tie points. Given some initial registration parameters, the proposed approach utilizes the scanned points and estimated planar features on both scans to determine the optimum parameters in the least squares sense. Both the uncertainty of the points due to the incidence angle, and the uncertainty of the local normal vectors of the planar features are taken into account in the stochastic model of the adjustment. The impact that these considerations with the stochastic model have on the registration is then demonstrated with comparisons on real terrestrial laser scanning data, and on smaller simulated data.

  12. Customized patterned substrates for highly versatile correlative light-scanning electron microscopy

    Science.gov (United States)

    Benedetti, Lorena; Sogne, Elisa; Rodighiero, Simona; Marchesi, Davide; Milani, Paolo; Francolini, Maura

    2014-01-01

    Correlative light electron microscopy (CLEM) combines the advantages of light and electron microscopy, thus making it possible to follow dynamic events in living cells at nanometre resolution. Various CLEM approaches and devices have been developed, each of which has its own advantages and technical challenges. We here describe our customized patterned glass substrates, which improve the feasibility of correlative fluorescence/confocal and scanning electron microscopy. PMID:25391455

  13. A polygon laser scanning micrometer for magnet size measurement studies

    Science.gov (United States)

    Khullar, R.; Mishra, G.; Sharma, G.; Prakash, B.; Gehlot, M.; Huse, V.; Mishra, S.

    2014-05-01

    In this paper, we describe the design and development of a polygon laser scanner for undulator magnet size measurement studies. In the laser scan micrometer, a laser light source is focused on to the facets of a rotating polygon mirror that reflects the laser beam. The parallel light emerging from the polygon surface falls on the object through a F-theta lens. The object obstructs the light. A lens at the opposite side of the object collects and focuses the light onto a detector. The shadow caused by the obstruction results in an output voltage for a period of time that is proportional to the size of the object. The method is used for undulator magnet size measurements for free electron laser applications.

  14. Identification of sandstone core damage using scanning electron microscopy

    Science.gov (United States)

    Ismail, Abdul Razak; Jaafar, Mohd Zaidi; Sulaiman, Wan Rosli Wan; Ismail, Issham; Shiunn, Ng Yinn

    2017-12-01

    Particles and fluids invasion into the pore spaces causes serious damage to the formation, resulting reduction in petroleum production. In order to prevent permeability damage for a well effectively, the damage mechanisms should be identified. In this study, water-based drilling fluid was compared to oil-based drilling fluids based on microscopic observation. The cores were damaged by several drilling fluid systems. Scanning electron microscope (SEM) was used to observe the damage mechanism caused by the drilling fluids. Results showed that the ester based drilling fluid system caused the most serious damage followed by synthetic oil based system and KCI-polymer system. Fine solids and filtrate migration and emulsion blockage are believed to be the major mechanisms controlling the changes in flow properties for the sandstone samples.

  15. The theory and practice of high resolution scanning electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Joy, D.C. (Tennessee Univ., Knoxville, TN (USA) Oak Ridge National Lab., TN (USA))

    1990-01-01

    Recent advances in instrumentation have produced the first commercial examples of what can justifiably be called High Resolution Scanning Electron Microscopes. The key components of such instruments are a cold field emission gun, a small-gap immersion probe-forming lens, and a clean dry-pumped vacuum. The performance of these microscopes is characterized by several major features including a spatial resolution, in secondary electron mode on solid specimens, which can exceed 1nm on a routine basis; an incident probe current density of the order of 10{sup 6} amps/cm{sup 2}; and the ability to maintain these levels of performance over an accelerating voltage range of from 1 to 30keV. This combination of high resolution, high probe current, low contamination and flexible electron-optical conditions provides many new opportunitites for the application of the SEM to materials science, physics, and the life sciences. 27 refs., 14 figs.

  16. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakaran, Ramprashad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rhodes, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schemer-Kohrn, Alan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guzman, Anthony D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-30

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  17. U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prabhakaran, Ramprashad [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Joshi, Vineet V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rhodes, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schemer-Kohrn, Alan L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guzman, Anthony D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-10-01

    The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

  18. HelioScan: a software framework for controlling in vivo microscopy setups with high hardware flexibility, functional diversity and extendibility.

    Science.gov (United States)

    Langer, Dominik; van 't Hoff, Marcel; Keller, Andreas J; Nagaraja, Chetan; Pfäffli, Oliver A; Göldi, Maurice; Kasper, Hansjörg; Helmchen, Fritjof

    2013-04-30

    Intravital microscopy such as in vivo imaging of brain dynamics is often performed with custom-built microscope setups controlled by custom-written software to meet specific requirements. Continuous technological advancement in the field has created a need for new control software that is flexible enough to support the biological researcher with innovative imaging techniques and provide the developer with a solid platform for quickly and easily implementing new extensions. Here, we introduce HelioScan, a software package written in LabVIEW, as a platform serving this dual role. HelioScan is designed as a collection of components that can be flexibly assembled into microscope control software tailored to the particular hardware and functionality requirements. Moreover, HelioScan provides a software framework, within which new functionality can be implemented in a quick and structured manner. A specific HelioScan application assembles at run-time from individual software components, based on user-definable configuration files. Due to its component-based architecture, HelioScan can exploit synergies of multiple developers working in parallel on different components in a community effort. We exemplify the capabilities and versatility of HelioScan by demonstrating several in vivo brain imaging modes, including camera-based intrinsic optical signal imaging for functional mapping of cortical areas, standard two-photon laser-scanning microscopy using galvanometric mirrors, and high-speed in vivo two-photon calcium imaging using either acousto-optic deflectors or a resonant scanner. We recommend HelioScan as a convenient software framework for the in vivo imaging community. Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Adaptive phase compensation for ultracompact laser scanning endomicroscopy.

    Science.gov (United States)

    Thompson, Alex J; Paterson, Carl; Neil, Mark A A; Dunsby, Chris; French, Paul M W

    2011-05-01

    We present an approach to laser scanning endomicroscopy that requires no moving parts and can be implemented with no distal scanners or optics, permitting extremely compact endoscopic probes to be developed. Our approach utilizes a spatial light modulator to correct for phase variations across a fiber imaging bundle and to encode for arbitrary wavefronts at the distal end of the fiber bundle. Thus, it is possible to realize both focusing and beam scanning at the output of the fiber bundle with no distal components. We present proof of principle results to illustrate three-dimensional scanning of the focal spot and exemplar images of a United States Air Force resolution test chart.

  20. Workshop on the coupling of synchrotron radiation IR and X-rays with tip based scanning probe microscopies X-TIP

    Energy Technology Data Exchange (ETDEWEB)

    Comin, F.; Martinez-Criado, G.; Mundboth, K.; Susini, J. [European Synchrotron Radiation Facility (ESRF), 38 - Grenoble (France); Purans, J.; Sammelselg, V. [Tartu Univ. (Estonia); Chevrier, J.; Huant, S. [Universite Joseph-Fourier, Grenoble I, LEPES, 38 (France); Hamilton, B. [School of Electrical Engineering and Electronics, Manchester (United Kingdom); Saito, A. [Osaka Univ., RIKEN/SPring8 (Japan); Dhez, O. [OGG, INFM/CNR, 38 - Grenoble (France); Brocklesby, W.S. [Southampton Univ., Optoelectronics Research Centre (United Kingdom); Alvarez-Prado, L.M. [Ovieado, Dept. de Fisica (Spain); Kuzmin, A. [Institute of Solid State Physics - Riga (Latvia); Pailharey, D. [CRMC-N - CNRS, 13 - Marseille (France); Tonneau, D. [CRMCN - Faculte des sciences de Luminy, 13 - Marseille (France); Chretien, P. [Laboratoire de Genie Electrique de Paris, 75 - Paris (France); Cricenti, A. [ISM-CNR, Rome (Italy); DeWilde, Y. [ESPCI, 75 - Paris (France)

    2005-07-01

    The coupling of scanning probe microscopy (SPM) with synchrotron radiation is attracting increasing attention from nano-science community. By combining these 2 tools one can visualize, for example, the sample nano-structure prior to any X-ray characterization. Coupled with focusing devices or independently, SPM can provide spatial resolution below the optical limits. Furthermore, the possibility of employing SPM to manipulate nano-objects under X-ray beams is another exciting perspective. This document gathers the transparencies of 6 of the presentations made at the workshop: 1) the combination of atomic force microscopy and X-ray beam - experimental set-up and objectives; 2) the combination of scanning probe microscope and X-rays for detection of electrons; 3) towards soft X-ray scanning microscopy using tapered capillaries and laser-based high harmonic sources; 4) near-field magneto-optical microscopy; 5) near-field scanning optical microscopy - a brief overview -; and 6) from aperture-less near-field optical microscopy to infra-red near-field night vision. 4 posters entitled: 1) development of laboratory setup for X-ray/AFM experiments, 2) towards X-ray diffraction on single islands, 3) nano-XEOL using near-field detection, and 4) local collection with a STM tip of photoelectrons emitted by a surface irradiated by visible of UV laser beam, are included in the document.

  1. Lamellar refractive surgery with scanned intrastromal picosecond and femtosecond laser pulses in animal eyes.

    Science.gov (United States)

    Kurtz, R M; Horvath, C; Liu, H H; Krueger, R R; Juhasz, T

    1998-01-01

    To evaluate the use of scanned intrastromal picosecond and femtosecond laser pulses in lamellar refractive surgical procedures. Intrastromal corneal photodisruption was performed in fresh porcine and primate cadaver eyes with a solid-state femtosecond laser. Laser pulses were focused 150 to 200 microns below the epithelial surface and scanned in a spiral pattern to create a plane. A flap was made by scanning an arc pattern from the plane of the spiral to the surface of the cornea. Tissue plane separation was graded using a standard scale, while internal surfaces were analyzed by scanning electron microscopy. Comparison was made to a picosecond laser system using the same delivery system device. Creation of a stromal lenticule for in situ keratomileusis was also demonstrated and compared with both laser systems. For femtosecond pulses, tissue separation was achieved best with pulse energies from 4 to 8 microJ and spot separations from 10-15 microns. Picosecond pulses accomplished less complete separations with pulse energies of 25 microJ and spot separations from 10 to 20 microns. Surface quality corresponded to dissection results, with high-grade dissections resulting in a smooth surface appearance, versus a more irregular surface for low-grade dissections. Although high-grade dissections could be created with picosecond pulses (with optimal parameters) in ex vivo porcine eyes, only femtosecond parameters produced similar results in ex vivo primate eyes. In contrast to previous attempts using picosecond lasers which require additional mechanical dissection, high precision lamellar refractive surgery may be practical with femtosecond laser pulses.

  2. Classification of mobile laser scanning point clouds from height features

    NARCIS (Netherlands)

    Zheng, M.; Lemmens, M.J.P.M.; van Oosterom, P.J.M.

    2017-01-01

    The demand for 3D maps of cities and road networks is steadily growing and mobile laser scanning (MLS) systems are often the preferred geo-data acquisition method for capturing such scenes. Because MLS systems are mounted on cars or vans they can acquire billions of points of road scenes within a

  3. From Point Cloud to Textured Model, the Zamani Laser Scanning ...

    African Journals Online (AJOL)

    The paper describes the stages of the laser scanning pipeline from data acquisition to the final 3D computer model based on experiences gained during the ongoing creation of data for the African Cultural Heritage Sites and Landscapes database. The various processes are briefly discussed and challenges are highlighted ...

  4. From Point Cloud to Textured Model, the Zamani Laser Scanning ...

    African Journals Online (AJOL)

    roshan

    Abstract. The paper describes the stages of the laser scanning pipeline from data acquisition to the final. 3D computer model based on experiences gained during the ongoing creation of data for the. African Cultural Heritage Sites and Landscapes database. The various processes are briefly discussed and challenges are ...

  5. Single scan vector prediction in selective laser melting

    NARCIS (Netherlands)

    Wits, Wessel Willems; Bruins, R.; Terpstra, L.; Huls, R.A.; Geijselaers, Hubertus J.M.

    2015-01-01

    In selective laser melting (SLM) products are built by melting layers of metal powder successively. Optimal process parameters are usually obtained by scanning single vectors and subsequently determining which settings lead to a good compromise between product density and build speed. This paper

  6. Micro-scanning mirrors for high-power laser applications in laser surgery

    Science.gov (United States)

    Sandner, Thilo; Kimme, Simon; Grasshoff, Thomas; Todt, Ulrich; Graf, Alexander; Tulea, Cristian; Lenenbach, Achim; Schenk, Harald

    2014-03-01

    We present two novel micro scanning mirrors with large aperture and HR dielectric coatings suitable for high power laser applications in a miniaturized laser-surgical instrument for neurosurgery to cut skull tissue. An electrostatic driven 2D-raster scanning mirror with 5x7.1mm aperture is used for dynamic steering of a ps-laser beam of the laser cutting process. A second magnetic 2D-beam steering mirror enables a static beam correction of a hand guided laser instrument. Optimizations of a magnetic gimbal micro mirror with 6 mm x 8 mm mirror plate are presented; here static deflections of 3° were reached. Both MEMS devices were successfully tested with a high power ps-laser at 532nm up to 20W average laser power.

  7. Airborne laser scanning and usefulness for hydrological models

    Directory of Open Access Journals (Sweden)

    M. Hollaus

    2005-01-01

    Full Text Available Digital terrain models form the basis for distributed hydrologic models as well as for two-dimensional hydraulic river flood models. The technique used for generating high accuracy digital terrain models has shifted from stereoscopic aerial-photography to airborne laser scanning during the last years. Since the disastrous floods 2002 in Austria, large airborne laser-scanning flight campaigns have been carried out for several river basins. Additionally to the topographic information, laser scanner data offer also the possibility to estimate object heights (vegetation, buildings. Detailed land cover maps can be derived in conjunction with the complementary information provided by high-resolution colour-infrared orthophotos. As already shown in several studies, the potential of airborne laser scanning to provide data for hydrologic/hydraulic applications is high. These studies were mostly constraint to small test sites. To overcome this spatial limitation, the current paper summarises the experiences to process airborne laser scanner data for large mountainous regions, thereby demonstrating the applicability of this technique in real-world hydrological applications.

  8. Quantitative three-dimensional ice roughness from scanning electron microscopy

    Science.gov (United States)

    Butterfield, Nicholas; Rowe, Penny M.; Stewart, Emily; Roesel, David; Neshyba, Steven

    2017-03-01

    We present a method for inferring surface morphology of ice from scanning electron microscope images. We first develop a novel functional form for the backscattered electron intensity as a function of ice facet orientation; this form is parameterized using smooth ice facets of known orientation. Three-dimensional representations of rough surfaces are retrieved at approximately micrometer resolution using Gauss-Newton inversion within a Bayesian framework. Statistical analysis of the resulting data sets permits characterization of ice surface roughness with a much higher statistical confidence than previously possible. A survey of results in the range -39°C to -29°C shows that characteristics of the roughness (e.g., Weibull parameters) are sensitive not only to the degree of roughening but also to the symmetry of the roughening. These results suggest that roughening characteristics obtained by remote sensing and in situ measurements of atmospheric ice clouds can potentially provide more facet-specific information than has previously been appreciated.

  9. Scanning Electron Microscopy with Samples in an Electric Field

    Science.gov (United States)

    Frank, Ludĕk; Hovorka, Miloš; Mikmeková, Šárka; Mikmeková, Eliška; Müllerová, Ilona; Pokorná, Zuzana

    2012-01-01

    The high negative bias of a sample in a scanning electron microscope constitutes the “cathode lens” with a strong electric field just above the sample surface. This mode offers a convenient tool for controlling the landing energy of electrons down to units or even fractions of electronvolts with only slight readjustments of the column. Moreover, the field accelerates and collimates the signal electrons to earthed detectors above and below the sample, thereby assuring high collection efficiency and high amplification of the image signal. One important feature is the ability to acquire the complete emission of the backscattered electrons, including those emitted at high angles with respect to the surface normal. The cathode lens aberrations are proportional to the landing energy of electrons so the spot size becomes nearly constant throughout the full energy scale. At low energies and with their complete angular distribution acquired, the backscattered electron images offer enhanced information about crystalline and electronic structures thanks to contrast mechanisms that are otherwise unavailable. Examples from various areas of materials science are presented.

  10. OSTEOBLAST ADHESION OF BREAST CANCER CELLS WITH SCANNING ACOUSTIC MICROSCOPY

    Energy Technology Data Exchange (ETDEWEB)

    Chiaki Miyasaka; Robyn R. Mercer; Andrea M. Mastro; Ken L. Telschow

    2005-03-01

    Breast cancer frequently metastasizes to the bone. Upon colonizing bone tissue, the cancer cells stimulate osteoclasts (cells that break bone down), resulting in large lesions in the bone. The breast cancer cells also affect osteoblasts (cells that build new bone). Conditioned medium was collected from a bone-metastatic breast cancer cell line, MDA-MB-231, and cultured with an immature osteoblast cell line, MC3T3-E1. Under these conditions the osteoblasts acquired a changed morphology and appeared to adherer in a different way to the substrate and to each other. To characterize cell adhesion, MC3T3-E1 osteoblasts were cultured with or without MDA-MB-231 conditioned medium for two days, and then assayed with a mechanical scanning acoustic reflection microscope (SAM). The SAM indicated that in normal medium the MC3T3-E1 osteoblasts were firmly attached to their plastic substrate. However, MC3T3-E1 cells cultured with MDA-MB-231 conditioned medium displayed both an abnormal shape and poor adhesion at the substrate interface. The cells were fixed and stained to visualize cytoskeletal components using optical microscopic techniques. We were not able to observe these differences until the cells were quite confluent after 7 days of culture. However, using the SAM, we were able to detect these changes within 2 days of culture with MDA-MB-231 conditioned medium

  11. Sequencing of adenine in DNA by scanning tunneling microscopy

    Science.gov (United States)

    Tanaka, Hiroyuki; Taniguchi, Masateru

    2017-08-01

    The development of DNA sequencing technology utilizing the detection of a tunnel current is important for next-generation sequencer technologies based on single-molecule analysis technology. Using a scanning tunneling microscope, we previously reported that dI/dV measurements and dI/dV mapping revealed that the guanine base (purine base) of DNA adsorbed onto the Cu(111) surface has a characteristic peak at V s = -1.6 V. If, in addition to guanine, the other purine base of DNA, namely, adenine, can be distinguished, then by reading all the purine bases of each single strand of a DNA double helix, the entire base sequence of the original double helix can be determined due to the complementarity of the DNA base pair. Therefore, the ability to read adenine is important from the viewpoint of sequencing. Here, we report on the identification of adenine by STM topographic and spectroscopic measurements using a synthetic DNA oligomer and viral DNA.

  12. Nanomaterial datasets to advance tomography in scanning transmission electron microscopy

    Science.gov (United States)

    Levin, Barnaby D. A.; Padgett, Elliot; Chen, Chien-Chun; Scott, M. C.; Xu, Rui; Theis, Wolfgang; Jiang, Yi; Yang, Yongsoo; Ophus, Colin; Zhang, Haitao; Ha, Don-Hyung; Wang, Deli; Yu, Yingchao; Abruña, Hector D.; Robinson, Richard D.; Ercius, Peter; Kourkoutis, Lena F.; Miao, Jianwei; Muller, David A.; Hovden, Robert

    2016-06-01

    Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co2P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.

  13. Active current-noise cancellation for Scanning Tunneling Microscopy

    Science.gov (United States)

    Pabbi, Lavish; Shoop, Conner; Banerjee, Riju; Dusch, Bill; Hudson, E. W.

    The high sensitivity of the scanning tunneling microscope (STM) poses a barrier to its use in a noisy environment. Vibrational noise, whether structural or acoustic in source, manifests as relative motion between the probe tip and the sample, then appearing in the Z feedback that tries to cancel it. Here we describe an active noise cancellation process that nullifies this motion by adding a drive signal into the existing Z feedback loop. The drive is digitally calculated by actively monitoring vibrations measured by an accelerometer placed in-situ close to the STM head. By transferring the vibration cancellation effort to this drive signal, vibration-created noise in the Z-feedback (during topography) or current (during spectroscopy) is significantly reduced. This inexpensive and easy solution, requiring no major instrumental modifications, is ideal for those looking to place their STM in a noisier environment, for example in the presence of active refrigeration systems (e.g. pulse tube cryocoolers) or coupled to high-vibration instrumentation. This material is based upon work supported by the National Science Foundation under Grant No. 1229138.

  14. Scanning electron microscopy investigations regarding Adonis vernalis L. flower morphology

    Directory of Open Access Journals (Sweden)

    Irina Neta GOSTIN

    2009-11-01

    Full Text Available The floral morphology of Adonis vernalis L. was observed with a scanning electron microscope (SEM. The investigations are important to clarify some taxonomical problems and also could provide useful diagnostic elements for the identification of this medicinal plant in powdered materials. All floral organs are initiated spirally and centripetally and develop centripetally. The petals (8-12 are shorter than the sepals (5-6 in early developmental stages. The petals are disposed on spiral (with 3-4 whorls. The stamens (numerous are unbranched and reach maturity centripetally; they are free of the perianth. The anther walls consisting of a single layer epidermis in the anther wall surrounding the sporagenous tissue, one row of endothecium, two to four rows of middle layer and one row of tapetum layer. In the anther walls, the tapetal cells, by glandular type, persist later in ontogenesis. Pollen grains are tricolpate with echinate surface. The gynoecium is multiple, apocarpous with distinct carpels. The carpels are ascidiate from the beginning. At the base of each carpel, numerousness short, unicellular, trichomes are present. The stigma differentiates as two crests along the ventral slit of the ovary. Each carpel contains a single ovule inside the ovary cavity. The mature ovule is anatropous, with two integuments. It is almost parallel to the funicle.

  15. Fabrication and characterization of probes for combined scanning electrochemical/optical microscopy experiments.

    Science.gov (United States)

    Lee, Youngmi; Bard, Allen J

    2002-08-01

    A technique that combines scanning electrochemical microscopy (SECM) and optical microscopy (OM) was implemented with a new probe tip. The tip for scanning electrochemicaVoptical microscopy (SECM/OM) was constructed by insulating a typical gold-coated near-field scanning optical microscopy tip using electrophoretic anodic paint. Once fabricated, the tip was characterized by steady-state cyclic voltammetry, as well as optical and electrochemical approach experiments. This tip generated a stable steady-state current and well-defined SECM approach curves for both conductive and insulating substrates. Durable tips whose geometry was a ring with < 1 microm as outer ring radius could be consistently fabricated. Simultaneous electrochemical and optical images of an interdigitated array electrode were obtained with a resolution on the micrometer scale, demonstrating good performance of the tip as both an optical and an electrochemical probe for imaging microstructures. The SECM feedback current measurements were successfully employed to determine tip-substrate distances for imaging.

  16. Comparing laser printing and barcode scanning designs

    Science.gov (United States)

    MacArthur, Thomas D.

    1991-02-01

    A comparison of requirements and designs for barcode and non-impact printer scanners reveals similarities and differences that may be useful in leading to new solutions for barcode scanner problems. The non-impact printer scanner has been in volume production for over 10 years successfully achieving low cost high performance and high quality targets. Where requirements are found to overlap solutions already implemented and proven for printer applications may fmd further application in bar code scanners. Typical technologies used for printing include flying spot scanners liquid crystal shutters scophony scanners and LED arrays. Of primary concern in measuring figure of merit are such critical parameters as cost lifetime reliability conformance to regulatory standards environmental ruggedness power consumption compactness insensitivity to orientation acoustic noise produced modularity spot size depth of field exposure level and uniformity data rate scan length and uniformity and many more. A comparison of printing technologies their capabilities and their limitations with those used in barcode scanners may reveal common problems where we can take advantage of work already completed in similar application where requirements are found to overlap.

  17. Wavefront-division lateral shearing autocorrelator for ultrafast laser microscopy.

    Science.gov (United States)

    Quercioli, Franco; Tiribilli, Bruno; Vassalli, Massimo

    2004-09-06

    Nonlinear optical microscopy is a new and rapidly growing technique within which ultrafast laser technology finds a wide range of applications. Pulse widening, due to the microscope optics, is an issue of major concern for nonlinear excitation efficiency. We herewith describe a novel, simple and inexpensive autocorrelation technique to characterize the laser temporal behavior at the microscope focal plane. The method is based on a wavefront-division lateral shearing interferometer which is inserted into the microscope optical path like an ordinary filter, while a spatially uniform fluorescent specimen is observed. The two-photon excited fluorescent image provides the second-order autocorrelation curve.

  18. Er/Tm:fiber laser system for coherent Raman microscopy.

    Science.gov (United States)

    Coluccelli, Nicola; Kumar, Vikas; Cassinerio, Marco; Galzerano, Gianluca; Marangoni, Marco; Cerullo, Giulio

    2014-06-01

    We present a novel architecture for a fiber-based hybrid laser system for coherent Raman microscopy, combining an amplified Er:fiber femtosecond oscillator with a Tm:fiber amplifier boosting the power of the 2-μm portion of a supercontinuum up to 300 mW. This is enough to obtain, by means of nonlinear spectral compression, sub-20-cm(-1) wide pump and Stokes pulses with 2500-3300  cm(-1) frequency detuning and average power at the 100-mW level. Application of this system to stimulated Raman scattering microscopy is discussed.

  19. Control Measurements of Crane Rails Performed by Terrestrial Laser Scanning.

    Science.gov (United States)

    Kregar, Klemen; Možina, Jan; Ambrožič, Tomaž; Kogoj, Dušan; Marjetič, Aleš; Štebe, Gašper; Savšek, Simona

    2017-07-20

    This article presents a method for measuring the geometry of crane rails with terrestrial laser scanning (TLS). Two sets of crane rails were divided into segments, their planes were adjusted, and the characteristic rail lines were defined. We used their profiles to define the positional and altitude deviations of the rails, the span and height difference between the two rails, and we also verified that they complied with the Eurocode 3 standard. We tested the method on crane rails at the hydroelectric power plant in Krško and the thermal power plant in Brestanica. We used two scanning techniques: "pure" TLS (Riegel VZ-400) and "hybrid" TLS (Leica MS50) scanning. This article's original contribution lies in the detailed presentation of the computations used to define the characteristic lines of the rails without using the numeric procedures from existing software packages. We also analysed the influence of segment length and point density on the rail geometry results, and compared the two laser scanning techniques. We also compared the results obtained by terrestrial laser scanning with the results obtained from the classic polar method, which served as a reference point for its precision.

  20. Candida albicans morphologies revealed by scanning electron microscopy analysis

    Directory of Open Access Journals (Sweden)

    M. Staniszewska

    2013-09-01

    Full Text Available Scanning electron microscope (SEM observations were used to analyze particular morphologies of Candida albicans clinical isolate (strain 82 and mutants defective in hyphae-promoting genes EFG1 (strain HLC52 and/ or CPH1 (strains HLC54 and Can16. Transcription factors Efg1 and Cph1 play role in regulating filamentation and adhesion of C. albicans' morphologies. Comparative analysis of such mutants and clinical isolate showed that Efg1 is required for human serum-induced cell growth and morphological switching. In the study, distinct differences between ultrastructural patterns of clinical strain's and null mutants' morphologies were observed (spherical vs tube-like blastoconidia, or solid and fragile constricted septa vs only the latter observed in strains with EFG1 deleted. In addition, wild type strain displayed smooth colonies of cells in comparison to mutants which exhibited wrinkled phenotype. It was observed that blastoconidia of clinical strain exhibited either polarly or randomly located budding. Contrariwise, morphotypes of mutants showed either multiple polar budding or a centrally located single bud scar (mother-daughter cell junction distinguishing tube-like yeast/ pseudohyphal growth (the length-to-width ratios larger than 1.5. In their planktonic form of growth, blastoconidia of clinical bloodstream isolate formed constitutively true hyphae under undiluted human serum inducing conditions. It was found that true hyphae are essential elements for developing structural integrity of conglomerate, as mutants displaying defects in their flocculation and conglomerate-forming abilities in serum. While filamentation is an important virulence trait in C. albicans the true hyphae are the morphologies which may be expected to play a role in bloodstream infections.

  1. Characterization of gold nanoparticle films: Rutherford backscattering spectroscopy, scanning electron microscopy with image analysis, and atomic force microscopy

    Directory of Open Access Journals (Sweden)

    Pia C. Lansåker

    2014-10-01

    Full Text Available Gold nanoparticle films are of interest in several branches of science and technology, and accurate sample characterization is needed but technically demanding. We prepared such films by DC magnetron sputtering and recorded their mass thickness by Rutherford backscattering spectroscopy. The geometric thickness dg—from the substrate to the tops of the nanoparticles—was obtained by scanning electron microscopy (SEM combined with image analysis as well as by atomic force microscopy (AFM. The various techniques yielded an internally consistent characterization of the films. In particular, very similar results for dg were obtained by SEM with image analysis and by AFM.

  2. Cryo-Scanning Electron Microscopy (SEM) and Scanning Transmission Electron Microscopy (STEM)-in-SEM for Bio- and Organo-Mineral Interface Characterization in the Environment.

    Science.gov (United States)

    Wille, Guillaume; Hellal, Jennifer; Ollivier, Patrick; Richard, Annie; Burel, Agnes; Jolly, Louis; Crampon, Marc; Michel, Caroline

    2017-11-16

    Understanding biofilm interactions with surrounding substratum and pollutants/particles can benefit from the application of existing microscopy tools. Using the example of biofilm interactions with zero-valent iron nanoparticles (nZVI), this study aims to apply various approaches in biofilm preparation and labeling for fluorescent or electron microscopy and energy dispersive X-ray spectrometry (EDS) microanalysis for accurate observations. According to the targeted microscopy method, biofilms were sampled as flocs or attached biofilm, submitted to labeling using 4',6-diamidino-2-phenylindol, lectins PNA and ConA coupled to fluorescent dye or gold nanoparticles, and prepared for observation (fixation, cross-section, freezing, ultramicrotomy). Fluorescent microscopy revealed that nZVI were embedded in the biofilm structure as aggregates but the resolution was insufficient to observe individual nZVI. Cryo-scanning electron microscopy (SEM) observations showed nZVI aggregates close to bacteria, but it was not possible to confirm direct interactions between nZVI and cell membranes. Scanning transmission electron microscopy in the SEM (STEM-in-SEM) showed that nZVI aggregates could enter the biofilm to a depth of 7-11 µm. Bacteria were surrounded by a ring of extracellular polymeric substances (EPS) preventing direct nZVI/membrane interactions. STEM/EDS mapping revealed a co-localization of nZVI aggregates with lectins suggesting a potential role of EPS in nZVI embedding. Thus, the combination of divergent microscopy approaches is a good approach to better understand and characterize biofilm/metal interactions.

  3. Study of laser uncaging induced morphological alteration of rat cortical neurites using atomic force microscopy.

    Science.gov (United States)

    Tian, Jian; Tu, Chunlong; Liang, Yitao; Zhou, Jian; Ye, Xuesong

    2015-09-30

    Activity-dependent structural remodeling is an important aspect of neuronal plasticity. In the previous researches, neuronal structure variations resulting from external interventions were detected by the imaging instruments such as the fluorescence microscopy, the scanning/transmission electron microscopy (SEM/TEM) and the laser confocal microscopy. In this article, a new platform which combined the photochemical stimulation with atomic force microscopy (AFM) was set up to detect the activity-dependent structural remodeling. In the experiments, the cortical neurites on the glass coverslips were stimulated by locally uncaged glutamate under the ultraviolet (UV) laser pulses, and a calcium-related structural collapse of neurites (about 250 nm height decrease) was observed by an AFM. This was the first attempt to combine the laser uncaging with AFM in living cell researches. With the advantages of highly localized stimulation (<5 μm), super resolution imaging (<3.8 nm), and convenient platform building, this system was suitable for the quantitative observation of the neuron mechanical property variations and morphological alterations modified by neural activities under different photochemical stimulations, which would be helpful for studying physiological and pathological mechanisms of structural and functional changes induced by the biomolecule acting. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. A simple but precise method for quantitative measurement of the quality of the laser focus in a scanning optical microscope.

    Science.gov (United States)

    Trägårdh, J; Macrae, K; Travis, C; Amor, R; Norris, G; Wilson, S H; Oppo, G-L; McConnell, G

    2015-07-01

    We report a method for characterizing the focussing laser beam exiting the objective in a laser scanning microscope. This method provides the size of the optical focus, the divergence of the beam, the ellipticity and the astigmatism. We use a microscopic-scale knife edge in the form of a simple transmission electron microscopy grid attached to a glass microscope slide, and a light-collecting optical fibre and photodiode underneath the specimen. By scanning the laser spot from a reflective to a transmitting part of the grid, a beam profile in the form of an error function can be obtained and by repeating this with the knife edge at different axial positions relative to the beam waist, the divergence and astigmatism of the postobjective laser beam can be obtained. The measured divergence can be used to quantify how much of the full numerical aperture of the lens is used in practice. We present data of the beam radius, beam divergence, ellipticity and astigmatism obtained with low (0.15, 0.7) and high (1.3) numerical aperture lenses and lasers commonly used in confocal and multiphoton laser scanning microscopy. Our knife-edge method has several advantages over alternative knife-edge methods used in microscopy including that the knife edge is easy to prepare, that the beam can be characterized also directly under a cover slip, as necessary to reduce spherical aberrations for objectives designed to be used with a cover slip, and it is suitable for use with commercial laser scanning microscopes where access to the laser beam can be limited. © 2015 The Authors Journal of Microscopy © 2015 Royal Microscopical Society.

  5. Mapping Carrier Dynamics on Material Surfaces in Space and Time using Scanning Ultrafast Electron Microscopy

    KAUST Repository

    Sun, Jingya

    2016-02-25

    Selectively capturing the ultrafast dynamics of charge carriers on materials surfaces and at interfaces is crucial to the design of solar cells and optoelectronic devices. Despite extensive research efforts over the past few decades, information and understanding about surface-dynamical processes, including carrier trapping and recombination remains extremely limited. A key challenge is to selectively map such dynamic processes, a capability that is hitherto impractical by time-resolved laser techniques, which are limited by the laser’s relatively large penetration depth and consequently they record mainly bulk information. Such surface dynamics can only be mapped in real space and time by applying four-dimensional (4D) scanning ultrafast electron microscopy (S-UEM), which records snapshots of materials surfaces with nanometer spatial and sub-picosecond temporal resolutions. In this method, the secondary electron (SE) signal emitted from the sample’s surface is extremely sensitive to the surface dynamics and is detected in real time. In several unique applications, we spatially and temporally visualize the SE energy gain and loss, the charge carrier dynamics on the surface of InGaN nanowires and CdSe single crystals and its powder film. We also provide the mechanisms for the observed dynamics, which will be the foundation for future potential applications of S-UEM to a wide range of studies on material surfaces and device interfaces.

  6. Multimodal backside imaging of a microcontroller using confocal laser scanning and optical-beam-induced current imaging

    Science.gov (United States)

    Finkeldey, Markus; Göring, Lena; Schellenberg, Falk; Brenner, Carsten; Gerhardt, Nils C.; Hofmann, Martin

    2017-02-01

    Microscopy imaging with a single technology is usually restricted to a single contrast mechanism. Multimodal imaging is a promising technique to improve the structural information that could be obtained about a device under test (DUT). Due to the different contrast mechanisms of laser scanning microscopy (LSM), confocal laser scanning microscopy (CLSM) and optical beam induced current microscopy (OBICM), a combination could improve the detection of structures in integrated circuits (ICs) and helps to reveal their layout. While OBIC imaging is sensitive to the changes between differently doped areas and to semiconductor-metal transitions, CLSM imaging is mostly sensitive to changes in absorption and reflection. In this work we present the implementation of OBIC imaging into a CLSM. We show first results using industry standard Atmel microcontrollers (MCUs) with a feature size of about 250nm as DUTs. Analyzing these types of microcontrollers helps to improve in the field of side-channel attacks to find hardware Trojans, possible spots for laser fault attacks and for reverse engineering. For the experimental results the DUT is placed on a custom circuit board that allows us to measure the current while imaging it in our in-house built stage scanning microscope using a near infrared (NIR) laser diode as light source. The DUT is thinned and polished, allowing backside imaging through the Si-substrate. We demonstrate the possibilities using this optical setup by evaluating OBIC, LSM and CLSM images above and below the threshold of the laser source.

  7. Registration Procedures for Terrestrial Laser Scanning in Geomorphologic Studies

    Science.gov (United States)

    Collins, B. D.; Kayen, R.; Minasian, D.

    2006-12-01

    Terrestrial based laser scanning, from either vehicle or tripod mounts allows the collection of geomorphologic data at previously unprecedented detail and volume. However, despite the ease of collecting this data in many settings, post-processing datasets collected without laser-visible reflectors within individual scans can lead to difficulties in both registration and georeferencing procedures. We have been actively involved in gathering data sets from a number of different environments and have been developing various techniques to post-process the data using surface registration methods. These methods use the point cloud or model surface to find a best-fit of the three-dimensional terrain. Recently, we have collected laser scan data of levee breaches in New Orleans following Hurricane Katrina, a glacial cirque basin in the Canadian Rockies, a deep-seated landslide mass in Ventura County, California, rapidly evolving coastal bluffs in Central California, and sand bars and archeological sites in Grand Canyon National Park, Arizona. In each of these projects, setting up accurately surveyed reflectors was impractical due to the locations dynamic and fairly inaccessible setting. Robust surface registration procedures were therefore needed to provide accurate terrain models. We have used laser scanning results from these projects to assess the efficiency of the various post- processing methodologies for obtaining final registered and georeferenced point clouds and surface models. We compared registration results obtained both with and without accurate GPS coordinates for the laser scanner origin (Ventura and coastal landslides), use of a supporting total station unit (Grand Canyon), and collection of DGPS data on targets imaged in the LIDAR data after the scanning process (Katrina Levees). In many of these settings, the model fit improved by four times, from a root mean square error of 20 cm to 5cm when accurately surveyed coordinates were utilized for the laser scan

  8. Artifact mitigation of ptychography integrated with on-the-fly scanning probe microscopy

    Science.gov (United States)

    Huang, Xiaojing; Yan, Hanfei; Ge, Mingyuan; Öztürk, Hande; Nazaretski, Evgeny; Robinson, Ian K.; Chu, Yong S.

    2017-07-01

    We report our experiences with conducting ptychography simultaneously with the X-ray fluorescence measurement using the on-the-fly mode for efficient multi-modality imaging. We demonstrate that the periodic artifact inherent to the raster scan pattern can be mitigated using a sufficiently fine scan step size to provide an overlap ratio of >70%. This allows us to obtain transmitted phase contrast images with enhanced spatial resolution from ptychography while maintaining the fluorescence imaging with continuous-motion scans on pixelated grids. This capability will greatly improve the competence and throughput of scanning probe X-ray microscopy.

  9. Scanning electron microscopy and transmission electron microscopy study of hot-deformed gamma-TiAl-based alloy microstructure.

    Science.gov (United States)

    Chrapoński, J; Rodak, K

    2006-09-01

    The aim of this work was to assess the changes in the microstructure of hot-deformed specimens made of alloys containing 46-50 at.% Al, 2 at.% Cr and 2 at.% Nb (and alloying additions such as carbon and boron) with the aid of scanning electron microscopy and transmission electron microscopy techniques. After homogenization and heat treatment performed in order to make diverse lamellae thickness, the specimens were compressed at 1000 degrees C. Transmission electron microscopy examinations of specimens after the compression test revealed the presence of heavily deformed areas with a high density of dislocation. Deformation twins were also observed. Dynamically recrystallized grains were revealed. For alloys no. 2 and no. 3, the recovery and recrystallization processes were more extensive than for alloy no. 1.

  10. Spontaneous Polarization in Bio-organic Materials Studied by Scanning Pyroelectric Microscopy (SPEM) and Second Harmonic Generation Microscopy (SHGM)

    Science.gov (United States)

    Putzeys, T.; Wübbenhorst, M.; van der Veen, M. A.

    2015-06-01

    Bio-organic materials such as bones, teeth, and tendon generally show nonlinear optical (Masters and So in Handbook of Biomedical Nonlinear Optical Microscopy, 2008), pyro- and piezoelectric (Fukada and Yasuda in J Phys Soc Jpn 12:1158, 1957) properties, implying a permanent polarization, the presence of which can be rationalized by describing the growth of the sample and the creation of a polar axis according to Markov's theory of stochastic processes (Hulliger in Biophys J 84:3501, 2003; Batagiannis et al. in Curr Opin Solid State Mater Sci 17:107, 2010). Two proven, versatile techniques for probing spontaneous polarization distributions in solids are scanning pyroelectric microscopy (SPEM) and second harmonic generation microscopy (SHGM). The combination of pyroelectric scanning with SHG-microscopy in a single experimental setup leading to complementary pyroelectric and nonlinear optical data is demonstrated, providing us with a more complete image of the polarization in organic materials. Crystals consisting of a known polar and hyperpolarizable material, CNS (4-chloro-4-nitrostilbene) are used as a reference sample, to verify the functionality of the setup, with both SPEM and SHGM images revealing the same polarization domain information. In contrast, feline and human nails exhibit a pyroelectric response, but a second harmonic response is absent for both keratin containing materials, implying that there may be symmetry-allowed SHG, but with very inefficient second harmonophores. This new approach to polarity detection provides additional information on the polar and hyperpolar nature in a variety of (bio) materials.

  11. Observation of silicon carbide Schottky barrier diode under applied reverse bias using atomic force microscopy/Kelvin probe force microscopy/scanning capacitance force microscopy

    Science.gov (United States)

    Uruma, Takeshi; Satoh, Nobuo; Yamamoto, Hidekazu

    2017-08-01

    We have observed a commercial silicon-carbide Schottky barrier diode (SiC-SBD) using our novel analysis system, in which atomic force microscopy (AFM) is combined with both Kelvin probe force microscopy (KFM; for surface-potential measurement) and scanning capacitance force microscopy (SCFM; for differential-capacitance measurement). The results obtained for the SiC-SBD under an applied reverse bias indicate both the scan area in the sample and a peak value of the SCFM signal in the region where the existence of trapped electrons is deduced from the KFM analysis. Thus, our measurement system can be used to examine commercial power devices; however, novel polishing procedures are required in order to investigate the Schottky contact region.

  12. Laser Ultrasound Spectroscopy Scanning for 3D Printed Parts

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, Guendalyn Kendra [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-04

    One of the challenges of additive manufacturing is quality control due to the possibility of unseen flaws in the final product. The current methods of inspection are lacking in detail, too slow for practical use, or unable to validate internal structure. This report examines the use of laser ultrasound spectroscopy in layer by layer scans of 3D printed parts as they are created. The result is fast and detailed quality control. An additional advantage of this method is the ability to cancel a print as soon as a defect is detected, therefore saving materials and time. This technique, though simple in concept, has been a challenge to implement. I discuss tweaking the 3D printer configuration, and finding the optimal settings for laser scanning small parts made of ABS plastic, as well as the limits of how small of a detail the laser can detect. These settings include the frequency of the ultrasonic transducer, the speed of the laser, and the distance from the laser to the part.

  13. Scanning ion conductance microscopy for visualizing the three-dimensional surface topography of cells and tissues.

    Science.gov (United States)

    Nakajima, Masato; Mizutani, Yusuke; Iwata, Futoshi; Ushiki, Tatsuo

    2018-01-01

    Scanning ion conductance microscopy (SICM), which belongs to the family of scanning probe microscopy, regulates the tip-sample distance by monitoring the ion current through the use of an electrolyte-filled nanopipette as the probing tip. Thus, SICM enables "contact-free" imaging of cell surface topography in liquid conditions. In this paper, we applied hopping mode SICM for obtaining topographical images of convoluted tissue samples such as trachea and kidney in phosphate buffered saline. Some of the SICM images were compared with the images obtained by scanning electron microscopy (SEM) after drying the same samples. We showed that the imaging quality of hopping mode SICM was excellent enough for investigating the three-dimensional surface structure of the soft tissue samples. Thus, SICM is expected to be used for imaging a wide variety of cells and tissues - either fixed or alive- at high resolution under physiologically relevant liquid conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Emulation and design of terahertz reflection-mode confocal scanning microscopy based on virtual pinhole

    Science.gov (United States)

    Yang, Yong-fa; Li, Qi

    2014-12-01

    In the practical application of terahertz reflection-mode confocal scanning microscopy, the size of detector pinhole is an important factor that determines the performance of spatial resolution characteristic of the microscopic system. However, the use of physical pinhole brings some inconvenience to the experiment and the adjustment error has a great influence on the experiment result. Through reasonably selecting the parameter of matrix detector virtual pinhole (VPH), it can efficiently approximate the physical pinhole. By using this approach, the difficulty of experimental calibration is reduced significantly. In this article, an imaging scheme of terahertz reflection-mode confocal scanning microscopy that is based on the matrix detector VPH is put forward. The influence of detector pinhole size on the axial resolution of confocal scanning microscopy is emulated and analyzed. Then, the parameter of VPH is emulated when the best axial imaging performance is reached.

  15. Binocular eye tracking with the Tracking Scanning Laser Ophthalmoscope.

    Science.gov (United States)

    Stevenson, S B; Sheehy, C K; Roorda, A

    2016-01-01

    The development of high magnification retinal imaging has brought with it the ability to track eye motion with a precision of less than an arc minute. Previously these systems have provided only monocular records. Here we describe a modification to the Tracking Scanning Laser Ophthalmoscope (Sheehy et al., 2012) that splits the optical path in a way that slows the left and right retinas to be scanned almost simultaneously by a single system. A mirror placed at a retinal conjugate point redirects half of each horizontal scan line to the fellow eye. The collected video is a split image with left and right retinas appearing side by side in each frame. Analysis of the retinal motion in the recorded video provides an eye movement trace with very high temporal and spatial resolution. Results are presented from scans of subjects with normal ocular motility that fixated steadily on a green laser dot. The retinas were scanned at 4° eccentricity with a 2° square field. Eye position was extracted offline from recorded videos with an FFT based image analysis program written in Matlab. The noise level of the tracking was estimated to range from 0.25 to 0.5arcmin SD for three subjects. In the binocular recordings, the left eye/right eye difference was 1-2arcmin SD for vertical motion and 10-15arcmin SD for horizontal motion, in agreement with published values from other tracking techniques. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Optics designs and system MTF for laser scanning displays

    Science.gov (United States)

    Urey, Hakan; Nestorovic, Ned; Ng, Baldwin S.; Gross, Abraham A.

    1999-07-01

    The Virtual Retinal DisplayTM (VRDTM) technology is a new display technology being developed at Microvision Inc. The displayed image is scanned onto the viewer's retina using low- power red, green, and blue light sources. Microvision's proprietary miniaturized scanner designs make VRD system very well suited for head-mounted displays. In this paper we discuss some of the advantages of the VRD technology, various ocular designs for HMD and other applications, and details of constructing a system MTF budget for laser scanning systems that includes electronics, modulators, scanners, and optics.

  17. Optical photon reassignment super-resolved scanning laser ophthalmoscopy (Conference Presentation)

    Science.gov (United States)

    LaRocca, Francesco; DuBose, Theodore B.; Farsiu, Sina; Izatt, Joseph A.

    2017-02-01

    Conventional scanning laser ophthalmoscopy (SLO) utilizes a finite collection pinhole at a retinal conjugate plane to strongly reject out-of-focus light while primarily transmitting the in-focus, retinal backscattered signal. However, to improve lateral resolution, a sub-Airy disk collection pinhole is necessary, which drastically reduces the signal-to-noise ratio (SNR) of the system and is thus not commonly employed. Recently, an all-optical, super-resolution microscopy technique known as optical photon reassignment (OPRA) microscopy (also known as re-scan confocal microscopy) has been developed to bypass this fundamental tradeoff between resolution and SNR in confocal microscopy. We present a methodology and system design for obtaining super resolution in retinal imaging by combining the concepts of SLO and OPRA microscopy. The resolution improvement of the system was quantified using a 1951 USAF target at a telecentric intermediate image plane. Retinal images from human volunteers were acquired with this system both with and without using the OPRA technique to demonstrate the resolution improvement when imaging parafoveal cone photoreceptors. Finally, we quantified the resolution improvement in the retina by analyzing the radially averaged power spectrum of the retinal images.

  18. Differential diagnosis of choroidal melanomas and nervi using scanning laser ophthalmoscopical indocyanine green angiography

    DEFF Research Database (Denmark)

    Andersen, Mads V. Nis; Scherfig, Erik; Prause, J.U.

    1995-01-01

    Ophthalmology, choroidal melanoma, choroidal nevus, fluorescein angiography, indocyanine green (ICG), scanning laser ophthalmoscope (SLO), angiography......Ophthalmology, choroidal melanoma, choroidal nevus, fluorescein angiography, indocyanine green (ICG), scanning laser ophthalmoscope (SLO), angiography...

  19. Studying Dynamic Processes of Nano-sized Objects in Liquid using Scanning Transmission Electron Microscopy

    OpenAIRE

    Hermannsd?rfer, Justus; de Jonge, Niels

    2017-01-01

    Samples fully embedded in liquid can be studied at a nanoscale spatial resolution with Scanning Transmission Electron Microscopy (STEM) using a microfluidic chamber assembled in the specimen holder for Transmission Electron Microscopy (TEM) and STEM. The microfluidic system consists of two silicon microchips supporting thin Silicon Nitride (SiN) membrane windows. This article describes the basic steps of sample loading and data acquisition. Most important of all is to ensure that the liquid c...

  20. Laser activated nanothermolysis of leukemia cells monitored by photothermal microscopy

    Science.gov (United States)

    Lapotko, Dmitri; Lukianova, Ekaterina; Shnip, Alexander; Zheltov, George; Potapnev, Michail; Savitsky, Valeriy; Klimovich, Olga; Oraevsky, Alexander

    2005-04-01

    We are developing new diagnostic and therapeutic technologies for leukemia based on selective targeting of leukemia cells with gold nanoparticles and thermomechanical destruction of the tumor cells with laser-induced microbubbles. Clusters of spherical gold nanoparticles that have strong optical absorption of laser pulses at 532 nm served as nucleation sites of vapor microbubbles. The nanoparticles were targeted selectively to leukemia cells using leukemia-specific surface receptors and a set of two monoclonal antibodies. Application of a primary myeloid-specific antibody to tumor cells followed by targeting the cells with 30-nm nanoparticles conjugated with a secondary antibody (IgG) resulted in formation of nanoparticulate clusters due to aggregation of IgGs. Formation of clusters resulted in substantial decrease of the damage threshold for target cells. The results encourage development of Laser Activated Nanothermolysis as a Cell Elimination Therapy (LANCET) for leukemia. The proposed technology can be applied separately or in combination with chemotherapy for killing leukemia cells without damage to other blood cells. Potential applications include initial reduction of concentration of leukemia cells in blood prior to chemotherapy and treatment of residual tumor cells after the chemotherapy. Laser-induced bubbles in individual cells and cell damage were monitored by analyzing profile of photothermal response signals over the entire cell after irradiation with a single 10-ns long laser pulse. Photothermal microscopy was utilized for imaging formation of microbubbles around nanoparticulate clusters.

  1. Data analysis using the Internet: the World Wide Web scanning probe microscopy data analysis system.

    Science.gov (United States)

    Williams, P M; Davies, M C; Roberts, C J; Tendler, S J

    1997-10-01

    The first interactive world-wide web-based image analysis system is presented (http://pharm6.pharm.nottingham.ac.uk/processing/main. html). The system, currently tailored to scanning probe microscopy image data, has been developed to permit the use of software algorithms developed within our laboratory by researchers throughout the world. The implementation and functionality of the scanning probe microscopy server is described. Feedback from users of the facility has demonstrated its value within the research community, and highlighted key operational issues which are to be addressed. A future role of Internet-based data processing software is also discussed.

  2. Scanning tunneling microscopy I general principles and applications to clean and adsorbate-covered surfaces

    CERN Document Server

    Wiesendanger, Roland

    1992-01-01

    Scanning Tunneling Microscopy I provides a unique introduction to a novel and fascinating technique that produces beautiful images of nature on an atomic scale. It is the first of three volumes that together offer a comprehensive treatment of scanning tunneling microscopy, its diverse applications, and its theoretical treatment. In this volume the reader will find a detailed description of the technique itself and of its applications to metals, semiconductors, layered materials, adsorbed molecules and superconductors. In addition to the many representative results reviewed, extensive references to original work will help to make accessible the vast body of knowledge already accumulated in this field.

  3. Local analysis of semiconductor nanoobjects by scanning tunneling atomic force microscopy

    Directory of Open Access Journals (Sweden)

    Natalia A. Lashkova

    2015-03-01

    Full Text Available The features of the current–voltage (I–V measurements in local regions of semiconductor nanostructures by conductive atomic force microscopy (AFM are discussed. The standard procedure of I–V measurements in conductive AFM leads not infrequently to the thermomechanical stresses in the sample and, as a consequence, nonreproducibility and unreliability of measurements. The technique of obtaining reproducible current–voltage characteristics is proposed. According to the technique, a series of measurements of the selected scanning area in the mode of conducting AFM should be taken, each at the certain value of the potential. According to a series of scans I–V curve at a particular point (for any point of the scan was plotted. The program is realized in the LabVIEW software. The proposed method extends the capabilities of scanning probe microscopy in the diagnosis of nanostructured semiconductor materials.

  4. Stochastic Micro-Pattern for Automated Correlative Fluorescence - Scanning Electron Microscopy

    Science.gov (United States)

    Begemann, Isabell; Viplav, Abhiyan; Rasch, Christiane; Galic, Milos

    2015-01-01

    Studies of cellular surface features gain from correlative approaches, where live cell information acquired by fluorescence light microscopy is complemented by ultrastructural information from scanning electron micrographs. Current approaches to spatially align fluorescence images with scanning electron micrographs are technically challenging and often cost or time-intensive. Relying exclusively on open-source software and equipment available in a standard lab, we have developed a method for rapid, software-assisted alignment of fluorescence images with the corresponding scanning electron micrographs via a stochastic gold micro-pattern. Here, we provide detailed instructions for micro-pattern production and image processing, troubleshooting for critical intermediate steps, and examples of membrane ultra-structures aligned with the fluorescence signal of proteins enriched at such sites. Together, the presented method for correlative fluorescence – scanning electron microscopy is versatile, robust and easily integrated into existing workflows, permitting image alignment with accuracy comparable to existing approaches with negligible investment of time or capital. PMID:26647824

  5. Atomic force microscopy and scanning electron microscopy analysis of daily disposable limbal ring contact lenses

    OpenAIRE

    Lorenz, Kathrine Osborn; Kakkassery, Joseph; Boree, Danielle; Pinto, David

    2014-01-01

    Background Limbal ring (also known as ‘circle’) contact lenses are becoming increasingly popular, especially in Asian markets because of their eye-enhancing effects. The pigment particles that give the eye-enhancing effects of these lenses can be found on the front or back surface of the contact lens or ‘enclosed’ within the lens matrix. The purpose of this research was to evaluate the pigment location and surface roughness of seven types of ‘circle’ contact lenses. Methods Scanning electron ...

  6. SEMANTIC LABELLING OF ROAD FURNITURE IN MOBILE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    F. Li

    2017-09-01

    Full Text Available Road furniture semantic labelling is vital for large scale mapping and autonomous driving systems. Much research has been investigated on road furniture interpretation in both 2D images and 3D point clouds. Precise interpretation of road furniture in mobile laser scanning data still remains unexplored. In this paper, a novel method is proposed to interpret road furniture based on their logical relations and functionalities. Our work represents the most detailed interpretation of road furniture in mobile laser scanning data. 93.3 % of poles are correctly extracted and all of them are correctly recognised. 94.3 % of street light heads are detected and 76.9 % of them are correctly identified. Despite errors arising from the recognition of other components, our framework provides a promising solution to automatically map road furniture at a detailed level in urban environments.

  7. Semantic Labelling of Road Furniture in Mobile Laser Scanning Data

    Science.gov (United States)

    Li, F.; Oude Elberink, S.; Vosselman, G.

    2017-09-01

    Road furniture semantic labelling is vital for large scale mapping and autonomous driving systems. Much research has been investigated on road furniture interpretation in both 2D images and 3D point clouds. Precise interpretation of road furniture in mobile laser scanning data still remains unexplored. In this paper, a novel method is proposed to interpret road furniture based on their logical relations and functionalities. Our work represents the most detailed interpretation of road furniture in mobile laser scanning data. 93.3 % of poles are correctly extracted and all of them are correctly recognised. 94.3 % of street light heads are detected and 76.9 % of them are correctly identified. Despite errors arising from the recognition of other components, our framework provides a promising solution to automatically map road furniture at a detailed level in urban environments.

  8. Superresolution upgrade for confocal spinning disk systems using image scanning microscopy (Conference Presentation)

    Science.gov (United States)

    Isbaner, Sebastian; Hähnel, Dirk; Gregor, Ingo; Enderlein, Jörg

    2017-02-01

    Confocal Spinning Disk Systems are widely used for 3D cell imaging because they offer the advantage of optical sectioning at high framerates and are easy to use. However, as in confocal microscopy, the imaging resolution is diffraction limited, which can be theoretically improved by a factor of 2 using the principle of Image Scanning Microscopy (ISM) [1]. ISM with a Confocal Spinning Disk setup (CSDISM) has been shown to improve contrast as well as lateral resolution (FWHM) from 201 +/- 20 nm to 130 +/- 10 nm at 488 nm excitation. A minimum total acquisition time of one second per ISM image makes this method highly suitable for 3D live cell imaging [2]. Here, we present a multicolor implementation of CSDISM for the popular Micro-Manager Open Source Microscopy platform. Since changes in the optical path are not necessary, this will allow any researcher to easily upgrade their standard Confocal Spinning Disk system at remarkable low cost ( 5000 USD) with an ISM superresolution option. [1]. Müller, C.B. and Enderlein, J. Image Scanning Microscopy. Physical Review Letters 104, (2010). [2]. Schulz, O. et al. Resolution doubling in fluorescence microscopy with confocal spinning-disk image scanning microscopy. Proceedings of the National Academy of Sciences of the United States of America 110, 21000-5 (2013).

  9. Artifact characterization and reduction in scanning X-ray Zernike phase contrast microscopy.

    Science.gov (United States)

    Vartiainen, Ismo; Holzner, Christian; Mohacsi, Istvan; Karvinen, Petri; Diaz, Ana; Pigino, Gaia; David, Christian

    2015-05-18

    Zernike phase contrast microscopy is a well-established method for imaging specimens with low absorption contrast. It has been successfully implemented in full-field microscopy using visible light and X-rays. In microscopy Cowley's reciprocity principle connects scanning and full-field imaging. Even though the reciprocity in Zernike phase contrast has been discussed by several authors over the past thirty years, only recently it was experimentally verified using scanning X-ray microscopy. In this paper, we investigate the image and contrast formation in scanning Zernike phase contrast microscopy with a particular and detailed focus on the origin of imaging artifacts that are typically associated with Zernike phase contrast. We demonstrate experimentally with X-rays the effect of the phase mask design on the contrast and halo artifacts and present an optimized design of the phase mask with respect to photon efficiency and artifact reduction. Similarly, due to the principle of reciprocity the observations and conclusions of this work have direct applicability to Zernike phase contrast in full-field microscopy as well.

  10. Evaluation of microvision SD2500 scanning laser display

    Science.gov (United States)

    Harding, Thomas H.; Rash, Clarence E.; Dennis, Scott J.

    2006-05-01

    Microvision's Spectrum TM SD2500 is a candidate technology for the Modular Integrated Helmet Display System (MIHDS)program. This HMD design is intended to provide a full-color, see-through, daylight and night-readable, moderate-resolution (800X600 pixels) display. The employed technology is that of scanning lasers. This paper presents the testing results for the latest version of this prototype system.

  11. A New Multichannel Spectral Imaging Laser Scanning Confocal Microscope

    Directory of Open Access Journals (Sweden)

    Yunhai Zhang

    2013-01-01

    Full Text Available We have developed a new multichannel spectral imaging laser scanning confocal microscope for effective detection of multiple fluorescent labeling in the research of biological tissues. In this paper, the design and key technologies of the system are introduced. Representative results on confocal imaging, 3-dimensional sectioning imaging, and spectral imaging are demonstrated. The results indicated that the system is applicable to multiple fluorescent labeling in biological experiments.

  12. Estimation of random bending strain using a scanning laser vibrometer

    Science.gov (United States)

    Miles, R. N.; Xu, Y.; Bao, W.

    1993-01-01

    Results are presented which were obtained from vibration measurements at discrete locations on a randomly excited structure to estimate the power spectral density of bending strain. The technique is intended to be applied using a scanning laser vibrometer to allow a non-contacting measurement of random bending strain over the surface of a structure. The experimental setup is described along with the data analysis procedure. The results presented here indicate that the method is practical and can lead to reliable estimates.

  13. Modeling 3D Objects for Navigation Purposes Using Laser Scanning

    Directory of Open Access Journals (Sweden)

    Cezary Specht

    2016-07-01

    Full Text Available The paper discusses the creation of 3d models and their applications in navigation. It contains a review of available methods and geometric data sources, focusing mostly on terrestrial laser scanning. It presents detailed description, from field survey to numerical elaboration, how to construct accurate model of a typical few storey building as a hypothetical reference in complex building navigation. Hence, the paper presents fields where 3d models are being used and their potential new applications.

  14. Selective retinal therapy with a continuous line scanning laser

    Science.gov (United States)

    Paulus, Yannis M.; Jain, ATul; Gariano, Ray F.; Nomoto, Hiroyuki; Schuele, Georg; Sramek, Christopher; Charalel, Resmi; Palanker, Daniel

    2010-02-01

    This study evaluates the effects of exposure duration, beam diameter, and power on the safety, selectivity, and healing of retinal lesions created using a continuous line scanning laser. A 532 nm laser (PASCALTM) with retinal beam diameters of 40 and 66 μm was applied to 60 eyes of 30 Dutch-Belted rabbits. Retinal exposure duration varied from 15 to 60 μs. Lesions were acutely assessed by ophthalmoscopy and fluorescein angiography (FA). RPE flatmounts were evaluated with live-dead fluorescent assay (LD). Histological analysis was performed at 1 hour, 1 and 3 days, 1 and 2 weeks, and 1 and 2 months following laser treatment. Ophthalmoscopic visibility (OV) of the lesions corresponded to photoreceptor damage on histological analysis at 1 hour. In subvisible lesions, FA and LD yielded similar thresholds of RPE damage. The ratios of the threshold of rupture and of OV to FA visibility (measures of safety and selectivity) increased with decreasing duration and beam diameter. Above the threshold of OV, histology showed focal RPE damage and photoreceptor loss at one day without inner retinal effects. By one week, continuity of photoreceptor and RPE layers was restored. By 1 month, photoreceptors appeared normal while hypertrophy and hyperpigmentation of the RPE persisted. Retinal therapy with a fast scanning continuous laser achieves selective targeting of the RPE and, at higher power, of the photoreceptors. The damage zone in the photoreceptor layer is quickly filled-in, likely due to photoreceptor migration from adjacent zones. Continuous scanning laser can treat large retinal areas within standard eye fixation time.

  15. Simultaneous Bright-Field and Dark-Field Scanning Transmission Electron Microscopy in Scanning Electron Microscopy: A New Approach for Analyzing Polymer System Morphology

    Science.gov (United States)

    Patel, Binay S.

    Scanning transmission electron microscopy in scanning electron microscopy (STEM-IN-SEM) is a convenient technique for polymer characterization. Utilizing the lower accelerating voltages, larger field of view and, exclusion of post-specimen projection lens in an SEM; STEM-IN-SEM has shown results comparable to transmission electron microscopy (TEM) observation of polymer morphology. Various specimen-holder geometries and detector arrangements have been used for bright field (BF) STEM-IN-SEM imaging. To further the characterization potential of STEM-IN-SEM a new specimen holder has been developed to facilitate simultaneous BF and dark field (DF) STEM-IN-SEM imaging. A new specimen holder and a new microscope configuration were designed for this new imaging technique. BF and DF signals were maximized for optimal STEM-IN-SEM imaging. BF signal intensities were found to be twice as large as DF signal intensities. BF and DF STEM-IN-SEM imaging spatial resolutions are limited to 1.8 nm and approximately 5 nm, respectively. Simultaneous BF & DF STEM-IN-SEM imaging is applicable to both industrial and academic research environments. Examples of commodity and engineering polymer morphology characterization are provided. Results are comparable to TEM observation and may serve as a suitable precursor to STEM characterization of polymer systems. Finally, future developments of various accessories for this technique are discussed.

  16. Terrestrial laser scanning in monitoring of anthropogenic objects

    Science.gov (United States)

    Zaczek-Peplinska, Janina; Kowalska, Maria

    2017-12-01

    The registered xyz coordinates in the form of a point cloud captured by terrestrial laser scanner and the intensity values (I) assigned to them make it possible to perform geometric and spectral analyses. Comparison of point clouds registered in different time periods requires conversion of the data to a common coordinate system and proper data selection is necessary. Factors like point distribution dependant on the distance between the scanner and the surveyed surface, angle of incidence, tasked scan's density and intensity value have to be taken into consideration. A prerequisite for running a correct analysis of the obtained point clouds registered during periodic measurements using a laser scanner is the ability to determine the quality and accuracy of the analysed data. The article presents a concept of spectral data adjustment based on geometric analysis of a surface as well as examples of geometric analyses integrating geometric and physical data in one cloud of points: cloud point coordinates, recorded intensity values, and thermal images of an object. The experiments described here show multiple possibilities of usage of terrestrial laser scanning data and display the necessity of using multi-aspect and multi-source analyses in anthropogenic object monitoring. The article presents examples of multisource data analyses with regard to Intensity value correction due to the beam's incidence angle. The measurements were performed using a Leica Nova MS50 scanning total station, Z+F Imager 5010 scanner and the integrated Z+F T-Cam thermal camera.

  17. Additive Manufacturing of Nickel-Base Superalloy IN100 Through Scanning Laser Epitaxy

    Science.gov (United States)

    Basak, Amrita; Das, Suman

    2018-01-01

    Scanning laser epitaxy (SLE) is a laser powder bed fusion (LPBF)-based additive manufacturing process that uses a high-power laser to consolidate metal powders facilitating the fabrication of three-dimensional objects. In the present study, SLE is used to produce samples of IN100, a high-γ' non-weldable nickel-base superalloy on similar chemistry substrates. A thorough analysis is performed using various advanced material characterization techniques such as high-resolution optical microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and Vickers microhardness measurements to characterize and compare the quality of the SLE-fabricated IN100 deposits with the investment cast IN100 substrates. The results show that the IN100 deposits have a finer γ/γ' microstructure, weaker elemental segregation, and higher microhardness compared with the substrate. Through this study, it is demonstrated that the SLE process has tremendous potential in the repair and manufacture of gas turbine hot-section components.

  18. Additive Manufacturing of Nickel-Base Superalloy IN100 Through Scanning Laser Epitaxy

    Science.gov (United States)

    Basak, Amrita; Das, Suman

    2017-11-01

    Scanning laser epitaxy (SLE) is a laser powder bed fusion (LPBF)-based additive manufacturing process that uses a high-power laser to consolidate metal powders facilitating the fabrication of three-dimensional objects. In the present study, SLE is used to produce samples of IN100, a high-γ' non-weldable nickel-base superalloy on similar chemistry substrates. A thorough analysis is performed using various advanced material characterization techniques such as high-resolution optical microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and Vickers microhardness measurements to characterize and compare the quality of the SLE-fabricated IN100 deposits with the investment cast IN100 substrates. The results show that the IN100 deposits have a finer γ/γ' microstructure, weaker elemental segregation, and higher microhardness compared with the substrate. Through this study, it is demonstrated that the SLE process has tremendous potential in the repair and manufacture of gas turbine hot-section components.

  19. TERRESTRIAL LASER SCANNING IN MONITORING OF HYDROTECHNICAL OBJECTS

    Directory of Open Access Journals (Sweden)

    Janina Zaczek-Peplinska

    2016-09-01

    Full Text Available Developing Terrestrial Laser Scanning technology is provided by modern measuring instruments, i.e. total stations and laser scanners. Owing to these instruments, periodic control measurements of concrete dams carried out as a part of geodetic surveying provide point models characterised by quasi-continuity. Basing on the results of these surveys, it is possible to conduct a number of geometric analyses, as well as to obtain information for detailed analytic and calculative deliberations. A scanner, similarly to a total station, determines spatial coordinates (X, Y, Z of the surveyed points by identifying distances and angles. Registration of intensity of the reflected laser beam (Intensity sent out by the scanner provides additional information on the surveyed object. Thanks to high working speed and a large amount of collected data, scanners have become an essential tool for a geodesist.This paper evaluates the possibility of applying Terrestrial Laser Scanning to test deformations and shifts of flagged points of concrete dam construction based on experimental measurements, including object inventory and evaluation of the dam’s concrete structure condition.

  20. Categorisation of full waveform data provided by laser scanning devices

    Science.gov (United States)

    Ullrich, Andreas; Pfennigbauer, Martin

    2011-11-01

    In 2004, a laser scanner device for commercial airborne laser scanning applications, the RIEGL LMS-Q560, was introduced to the market, making use of a radical alternative approach to the traditional analogue signal detection and processing schemes found in LIDAR instruments so far: digitizing the echo signals received by the instrument for every laser pulse and analysing these echo signals off-line in a so-called full waveform analysis in order to retrieve almost all information contained in the echo signal using transparent algorithms adaptable to specific applications. In the field of laser scanning the somewhat unspecific term "full waveform data" has since been established. We attempt a categorisation of the different types of the full waveform data found in the market. We discuss the challenges in echo digitization and waveform analysis from an instrument designer's point of view and we will address the benefits to be gained by using this technique, especially with respect to the so-called multi-target capability of pulsed time-of-flight LIDAR instruments.

  1. Computer-Controlled 3D Laser Scanning Microscope Based On Optical Disk Technology.

    Science.gov (United States)

    Schweizer, P.; Neveux, L.; Chiaramello, M.; Monteil, P.; Ostrowsky, D. B...

    1987-08-01

    We describe RASCALS* (RAster SCAn Laser System) a 2D and 3D scanning laser microscope and outline it's performance. This system, based on optical disk technology and a PC compatible computer offers an interesting cost/performance ratio compared to existing laser scanning microscopes.

  2. Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2015-01-01

    Selective laser melting is yet to become a standardized industrial manufacturing technique. The process continues to suffer from defects such as distortions, residual stresses, localized deformations and warpage caused primarily due to the localized heating, rapid cooling and high temperature...... gradients that occur during the process. While process monitoring and control of selective laser melting is an active area of research, establishing the reliability and robustness of the process still remains a challenge.In this paper, a methodology for generating reliable, optimized scanning paths...... and process parameters for selective laser melting of a standard sample is introduced. The processing of the sample is simulated by sequentially coupling a calibrated 3D pseudo-analytical thermal model with a 3D finite element mechanical model.The optimized processing parameters are subjected to a Monte Carlo...

  3. Microscopia confocal de barrido láser y su relación con la morfología de la bula de filtración Confocal laser scanning microscopy and its association to the morphology of the filtering bleb

    Directory of Open Access Journals (Sweden)

    María Teresa Ferrer Guerra

    2012-01-01

    Full Text Available Objetivo: describir los hallazgos de la microscopia confocal de barrido láser y su relación con la morfología de la bula de filtración. Métodos: estudio observacional descriptivo de corte transversal en 100 ojos. Se les realizó microscopia confocal de barrido láser con el HRT II y el módulo corneal de Rostock. Se aplicó la prueba de significación estadística de Mc. Nemar para una p=0,05. Resultados: predominó el grupo entre 61 y 80 años de edad (55,8 % y el color de la piel blanca (46,8 %. En el grupo de descenso de la presión intraocular en más del 30 % se ubicó la mayor cantidad de bulas de todos los tamaños. Las bulas de mediano tamaño fueron las que más disminuyeron las cifras de presión intraocular, con 24 ojos (55,8 %, p=0,00, seguidas por las de pequeño tamaño (p=0,14. Las bulas de filtración aplanadas fueron las más frecuentes en 55 % de los casos (p=0,00, y 67,4 % de estas se ubicaron en el grupo de descenso de presión intraocular de más de 30 % (p=0,01. Las bulas medianas presentaron la mayor cantidad de estroma en malla porosa (60 % y de microquistes epiteliales (56 % p=0,00. Conclusiones: la configuración aplanada y el tamaño mediano de la bula de filtración se relacionaron con la presencia de variables histológicas que infieren buen funcionamiento de la bula (microquistes epiteliales y estroma en malla porosa. También se relacionaron con un mayor descenso de la presión intraocular.Objective: to describe the findings in the confocal laser scanning microscopy and its relation with the morphology of the filtering bleb. Methods: cross-sectional, observational and descriptive study of 100 eyes that underwent confocal laser scanning microscopy with the Retinal Heidelberg Tomography and the Rostock corneal module. Mc Nemar’s statistical significance test was made to obtain p=0,05. Results: the 61-80 years old age group (55,8 % and the caucasians predominated. The group of eyes with over 30 % decrease of

  4. Ta Keo Temple Reconstruction Based on Terrestrial Laser Scanning Technology

    Directory of Open Access Journals (Sweden)

    X. Xi

    2015-08-01

    Full Text Available Ta Keo temple is one of the very famous temple complex of Angkor Wat in northwestern Cambodia. It has been suffering massive collapse and other serious damages in recent years. Nowadays, Terrestrial Laser Scanning(TLS technology is considered as a wellestablished resource for heritage documentation and protection (Lerma et al, 2008; Reshetyuk, 2009. This paper used TLS to reconstruct Ta Keo Temple. Firstly, we acquired 71 scanning stations of points cloud data with high density and high accuracy, and over one thousand images with high spatial resolution about the temple. Secondly, the raw points cloud data were denoised, reduced and managed efficiently, and registrated using an adjusted ICP algorithm. Thirdly, a triangulation method was used to model most objects. At last, we mapped the texture data into the digital model and a 3-D model of Ta Keo with high accuracy was achieved. The authors focus on large object reconstruction by TLS technology, and pay much attention to the scanning design, multi-station data and the whole project’s data registration, and texture mapping and so on. The research result will be useful for Ta Keo restoration, reconstruction and protection. Also, it is a good reference source for large complex buildings reconstruction when using terrestrial laser scanning technology.

  5. A review of biomedical multiphoton microscopy and its laser sources

    Science.gov (United States)

    Lefort, Claire

    2017-10-01

    Multiphoton microscopy (MPM) has been the subject of major development efforts for about 25 years for imaging biological specimens at micron scale and presented as an elegant alternative to classical fluorescence methods such as confocal microscopy. In this topical review, the main interests and technical requirements of MPM are addressed with a focus on the crucial role of excitation source for optimization of multiphoton processes. Then, an overview of the different sources successfully demonstrated in literature for MPM is presented, and their physical parameters are inventoried. A classification of these sources in function with their ability to optimize multiphoton processes is proposed, following a protocol found in literature. Starting from these considerations, a suggestion of a possible identikit of the ideal laser source for MPM concludes this topical review. Dedicated to Martin.

  6. Alternative configuration scheme for signal amplification with scanning ion conductance microscopy

    Science.gov (United States)

    Kim, Joonhui; Kim, Seong-Oh; Cho, Nam-Joon

    2015-02-01

    Scanning Ion Conductance Microscopy (SICM) is an emerging nanotechnology tool to investigate the morphology and charge transport properties of nanomaterials, including soft matter. SICM uses an electrolyte filled nanopipette as a scanning probe and detects current changes based on the distance between the nanopipette apex and the target sample in an electrolyte solution. In conventional SICM, the pipette sensor is excited by applying voltage as it raster scans near the surface. There have been attempts to improve upon raster scanning because it can induce collisions between the pipette sidewalls and target sample, especially for soft, dynamic materials (e.g., biological cells). Recently, Novak et al. demonstrated that hopping probe ion conductance microscopy (HPICM) with an adaptive scan method can improve the image quality obtained by SICM for such materials. However, HPICM is inherently slower than conventional raster scanning. In order to optimize both image quality and scanning speed, we report the development of an alternative configuration scheme for SICM signal amplification that is based on applying current to the nanopipette. This scheme overcomes traditional challenges associated with low bandwidth requirements of conventional SICM. Using our alternative scheme, we demonstrate successful imaging of L929 fibroblast cells and discuss the capabilities of this instrument configuration for future applications.

  7. Alternative configuration scheme for signal amplification with scanning ion conductance microscopy.

    Science.gov (United States)

    Kim, Joonhui; Kim, Seong-Oh; Cho, Nam-Joon

    2015-02-01

    Scanning Ion Conductance Microscopy (SICM) is an emerging nanotechnology tool to investigate the morphology and charge transport properties of nanomaterials, including soft matter. SICM uses an electrolyte filled nanopipette as a scanning probe and detects current changes based on the distance between the nanopipette apex and the target sample in an electrolyte solution. In conventional SICM, the pipette sensor is excited by applying voltage as it raster scans near the surface. There have been attempts to improve upon raster scanning because it can induce collisions between the pipette sidewalls and target sample, especially for soft, dynamic materials (e.g., biological cells). Recently, Novak et al. demonstrated that hopping probe ion conductance microscopy (HPICM) with an adaptive scan method can improve the image quality obtained by SICM for such materials. However, HPICM is inherently slower than conventional raster scanning. In order to optimize both image quality and scanning speed, we report the development of an alternative configuration scheme for SICM signal amplification that is based on applying current to the nanopipette. This scheme overcomes traditional challenges associated with low bandwidth requirements of conventional SICM. Using our alternative scheme, we demonstrate successful imaging of L929 fibroblast cells and discuss the capabilities of this instrument configuration for future applications.

  8. EVALUATION OF COMPUTER-CONTROLLED SCANNING ELECTRON MICROSCOPY APPLIED TO AN AMBIENT URBAN AEROSOL SAMPLE

    Science.gov (United States)

    Recent interest in monitoring and speciation of particulate matter has led to increased application of scanning electron microscopy (SEM) coupled with energy-dispersive x-ray analysis (EDX) to individual particle analysis. SEM/EDX provides information on the size, shape, co...

  9. Scanning electron microscopy and X-ray spectroscopy applied to mycelial phase of sporothrix schenckii

    Directory of Open Access Journals (Sweden)

    M. Thibaut

    1975-04-01

    Full Text Available Scanning electron microscopy applied to the mycelial phase of Sporothrix schenckii shows a matted mycelium with conidia of a regular pattern. X-Ray microanalysis applied in energy dispersive spectroscopy and also in wavelength dispersive spectroscopy reveals the presence of several elements of Mendeleef's classification.

  10. Bright-field scanning confocal electron microscopy using a double aberration-corrected transmission electron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Peng; Behan, Gavin; Kirkland, Angus I. [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Nellist, Peter D., E-mail: peter.nellist@materials.ox.ac.uk [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Cosgriff, Eireann C.; D' Alfonso, Adrian J.; Morgan, Andrew J.; Allen, Leslie J. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Hashimoto, Ayako [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); Takeguchi, Masaki [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); High Voltage Electron Microscopy Station, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Mitsuishi, Kazutaka [Advanced Nano-characterization Center, National Institute for Materials Science (NIMS), 3-13 Sakura, Tsukuba 305-0003 (Japan); Quantum Dot Research Center, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Shimojo, Masayuki [High Voltage Electron Microscopy Station, NIMS, 3-13 Sakura, Tsukuba 305-0003 (Japan); Advanced Science Research Laboratory, Saitama Institute of Technology, 1690 Fusaiji, Fukaya 369-0293 (Japan)

    2011-06-15

    Scanning confocal electron microscopy (SCEM) offers a mechanism for three-dimensional imaging of materials, which makes use of the reduced depth of field in an aberration-corrected transmission electron microscope. The simplest configuration of SCEM is the bright-field mode. In this paper we present experimental data and simulations showing the form of bright-field SCEM images. We show that the depth dependence of the three-dimensional image can be explained in terms of two-dimensional images formed in the detector plane. For a crystalline sample, this so-called probe image is shown to be similar to a conventional diffraction pattern. Experimental results and simulations show how the diffracted probes in this image are elongated in thicker crystals and the use of this elongation to estimate sample thickness is explored. -- Research Highlights: {yields} The confocal probe image in a scanning confocal electron microscopy image reveals information about the thickness and height of the crystalline layer. {yields} The form of the contrast in a three-dimensional bright-field scanning confocal electron microscopy image can be explained in terms of the confocal probe image. {yields} Despite the complicated form of the contrast in bright-field scanning confocal electron microscopy, we see that depth information is transferred on a 10 nm scale.

  11. Field-emission scanning electron microscopy of the internal cellular organization of fungi

    NARCIS (Netherlands)

    Muller, W.H.; Aelst, van A.C.; Humbel, B.M.; Krift, van der T.P.; Boekhout, T.

    2000-01-01

    Internal viewing of the cellular organization of hyphae by scanning electron microscopy is an alternative to observing sectioned fungal material with a transmission electron microscope. To study cytoplasmic organelles in the hyphal cells of fungi by SEM, colonies were chemically fixed with

  12. Morphologic differences observed by scanning electron microscopy according to the reason for pseudophakic IOL explantation

    DEFF Research Database (Denmark)

    Fernandez-Buenaga, Roberto; Alio, Jorge L.; Ramirez, Jose M.

    2015-01-01

    Purpose To compare variations in surface morphology, as studied by scanning electron microscopy (SEM), of explanted intraocular lenses (IOLs) concerning the cause leading to the explantation surgery. Methods In this prospective multicenter study, explanted IOLs were analyzed by SEM and energy-dis...

  13. Scanning electron microscopy with polarization analysis for multilayered chiral spin textures

    NARCIS (Netherlands)

    Lucassen, Juriaan; Kloodt-Twesten, Fabian; Frömter, Robert; Oepen, Hans Peter; Duine, Rembert A.|info:eu-repo/dai/nl/304830127; Swagten, Henk J. M.; Koopmans, Bert; Lavrijsen, Reinoud

    We show that scanning electron microscopy with polarization analysis (SEMPA) that is sensitive to both in-plane magnetization components can be used to image the out-of-plane magnetized multi-domain state in multilayered chiral spin textures. By depositing a thin layer of Fe on top of the multilayer

  14. Batch fabrication of scanning microscopy probes for thermal and magnetic imaging using standard micromachining

    NARCIS (Netherlands)

    Sarajlic, Edin; Vermeer, Rolf; Delalande, M.Y.; Siekman, Martin Herman; Huijink, R.; Fujita, H.; Abelmann, Leon

    2010-01-01

    We present a process for batch fabrication of a novel scanning microscopy probe for thermal and magnetic imaging using standard micromachining and conventional optical contact lithography. The probe features an AFM-type cantilever with a sharp pyramidal tip composed of four freestanding silicon

  15. Preparation of Chemically Etched Tips for Ambient Instructional Scanning Tunneling Microscopy

    Science.gov (United States)

    Zaccardi, Margot J.; Winkelmann, Kurt; Olson, Joel A.

    2010-01-01

    A first-year laboratory experiment that utilizes concepts of electrochemical tip etching for scanning tunneling microscopy (STM) is described. This experiment can be used in conjunction with any STM experiment. Students electrochemically etch gold STM tips using a time-efficient method, which can then be used in an instructional grade STM that…

  16. RGB color coded images in scanning electron microscopy of biological surfaces

    Czech Academy of Sciences Publication Activity Database

    Kofroňová, Olga; Benada, Oldřich

    2017-01-01

    Roč. 61, č. 3 (2017), s. 349-352 ISSN 0001-723X R&D Projects: GA MŠk(CZ) LO1509; GA ČR(CZ) GA16-20229S Institutional support: RVO:61388971 Keywords : Biological surfaces * Color images * Scanning electron microscopy Subject RIV: EE - Microbiology, Virology Impact factor: 0.673, year: 2016

  17. Scanning Electron Microscopy (SEM) Procedure for HE Powders on a LEO 438VP System

    Energy Technology Data Exchange (ETDEWEB)

    Zaka, Fowzia [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Energetic Materials Center

    2016-03-08

    This method describes the characterization of HE powders by Scanning Electron Microscopy (SEM). HE particles are dispersed onto an aluminum standard SEM specimen mount. Electron micrographs are collected at various magnifications (150 to 10,000 X) depending on HE particle size.

  18. Scanning Electron Microscopy (SEM) Procedure for HE Powders on a LEO 438VP System

    Energy Technology Data Exchange (ETDEWEB)

    Zaka, Fowzia [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Energetic Materials Center

    2016-03-21

    This method describes the characterization of HE powders by Scanning Electron Microscopy (SEM). HE particles are dispersed onto an aluminum standard SEM specimen mount. Electron micrographs are collected at various magnifications (150 to 10,000 X) depending on HE particle size.

  19. Covalently Immobilised Cytochrome C Imaged by In Situ Scanning Tunnelling Microscopy

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov; Olesen, Klaus G.; Danilov, Alexey I.

    1997-01-01

    In situ scanning tunnelling microscopy (STM) imaging of cytochrome c (cyt c) on polycrystalline Pt surfaces and on Au(lll) was achieved first by covalent immobilisation of 3-aminopropyltriethoxysilane (3-APTS) brought to react with oxide present on the Pt surfaces. Covalently bound 3-APTS forms a...

  20. Elastic Changes of Capsule in a Rat Knee Contracture Model Assessed by Scanning Acoustic Microscopy

    Science.gov (United States)

    Hagiwara, Y.; Chimoto, E.; Ando, A.; Saijo, Y.; Itoi, E.

    Sound speed of a capsule in a rat knee contracture model was measured by scanning acoustic microscopy. There was no statistical significant difference in the anterior capsule compared with the control group. However, the sound speed of the posterior capsule was significantly greater compared with the control group after prolonged immobilization.

  1. Pollen grain surface in Vaccinium myrtillus as seen in scanning electron microscopy

    Directory of Open Access Journals (Sweden)

    Józef Kocoń

    2014-01-01

    Full Text Available Pollen grain surface of Vaccinium myrtillus L. was analyzed by scanning electron microscopy. Pollen grains remain in tetrahedral tetrads. Grain surface is verrucose, consisting of thick, irregularly shaped muri, surrounding small, round or oval lumina. The surface of the muri is fissured, and minute papillae can also be noted.

  2. Carbon induced metal dusting of iron-nickel-chromium alloy surfaces : a scanning auger microscopy study

    NARCIS (Netherlands)

    Palasantzas, G; DeHosson, JTM

    2004-01-01

    In this work, we present an investigation on metal dusting of iron-nickel-chromium (Fe-Ni-Cr) alloy surfaces using scanning auger microscopy. It is shown that the formation of surface Cr-oxide and the surface finish condition can strongly influence and interrupt this catastrophic phenomenon. The

  3. Second-Harmonic Generation Scanning Microscopy on Domains in Al Surfaces

    DEFF Research Database (Denmark)

    Pedersen, Kjeld; Bozhevolnyi, Sergey I.

    1999-01-01

    Scanning optical second-harmonic generation microscopy has been used to investigate domains in the surface of polycrystaline Al. Strong contrast among the crystalline grains is obtained due to variations in their crystallographic orientations and thus also nonlinear response. The origin of the co...

  4. THALLUS SURFACES IN COCCOCARPIACEAE AND PANNARIACEAE (LICHENIZED ASCOMYCETES) VIEWED WITH SCANNING ELECTRON-MICROSCOPY

    NARCIS (Netherlands)

    LUMBSCH, HT; KOTHE, HW

    1992-01-01

    The thallus surfaces of species belonging to the Coccocarpiaceae and Pannariaceae were studied using scanning electron microscopy (SEM). A pored epicortex was shown in Coccocarpia ssp., Degelia gayana and D. plumbea. In the other species studied no definite pores were found. The probable systematic

  5. Cold-induced imbibition damage of lettuce embryos: A study using cryo-scanning electron microscopy

    NARCIS (Netherlands)

    Nijsse, J.; Walther, P.; Hoekstra, F.

    2004-01-01

    The impact of rehydration on a multicellular organism was studied in lettuce (Lactuca sativa L.) embryos, using cryo-scanning electron microscopy (cryo-SEM). Naked embryos were sensitive to imbibitional stress, whereas embryos with an intact, thick-walled endosperm were not. Imbibitional injury to

  6. Scanning Tunneling Microscopy Studies of Topological Insulators Grown by Molecular Beam Epitaxy

    Directory of Open Access Journals (Sweden)

    Xue Qikun

    2012-03-01

    Full Text Available We summarize our recent scanning tunneling microscopy (STM study of topological insulator thin films grown by molecular beam epitaxy (MBE, which includes the observation of electron standing waves on topological insulator surface and the Landau quantization of topological surface states. The work has provided valuable information to the understanding of intriguing properties of topological insulators, as predicted by theory.

  7. Combining optical tweezers and scanning probe microscopy to study DNA-protein interactions

    NARCIS (Netherlands)

    Huisstede, Jurgen H G; Subramaniam, Vinod; Bennink, Martin L

    We present the first results obtained with a new instrument designed and built to study DNA-protein interactions at the single molecule level. This microscope combines optical tweezers with scanning probe microscopy and allows us to locate DNA-binding proteins on a single suspended DNA molecule. A

  8. Near-Field Scanning Optical Microscopy of Single Fluorescent Dendritic Molecules

    NARCIS (Netherlands)

    Veerman, J.A.; Levi, S.; van Veggel, F.C.J.M.; Reinhoudt, David; van Hulst, N.F.

    1999-01-01

    Individual dendritic molecules adsorbed o­n glass containing a single fluorescent rhodamine B core have been observed with near-field scanning optical microscopy (NSOM); height and fluorescence images were obtained simultaneously. The dendritic assemblies can be discriminated from free fluorescent

  9. Adsorption of Cu phthalocyanine on Pt modified Ge(001): A scanning tunneling microscopy study

    NARCIS (Netherlands)

    Saedi, A.; Berkelaar, Robin P.; Kumar, Avijit; Poelsema, Bene; Zandvliet, Henricus J.W.

    2010-01-01

    The adsorption configurations of copper phthalocyanine (CuPc) molecules on platinum-modified Ge(001) have been studied using scanning tunneling microscopy. After deposition at room temperature and cooling down to 77 K the CuPc molecules are still dynamic. However, after annealing at 550±50 K, the

  10. PROBING STRESS EFFECTS IN SINGLE CRYSTAL ORGANIC TRANSISTORS BY SCANNING KELVIN PROBE MICROSCOPY

    Energy Technology Data Exchange (ETDEWEB)

    Teague, L

    2010-06-11

    We report scanning Kelvin probe microscopy (SKPM) of single crystal difluoro bis(triethylsilylethynyl) anthradithiophene (diF-TESADT) organic transistors. SKPM provides a direct measurement of the intrinsic charge transport in the crystals independent of contact effects and reveals that degradation of device performance occurs over a time period of minutes as the diF-TESADT crystal becomes charged.

  11. Laser cutting of irregular shape object based on stereo vision laser galvanometric scanning system

    Science.gov (United States)

    Qi, Li; Zhang, Yixin; Wang, Shun; Tang, Zhiqiang; Yang, Huan; Zhang, Xuping

    2015-05-01

    Irregular shape objects with different 3-dimensional (3D) appearances are difficult to be shaped into customized uniform pattern by current laser machining approaches. A laser galvanometric scanning system (LGS) could be a potential candidate since it can easily achieve path-adjustable laser shaping. However, without knowing the actual 3D topography of the object, the processing result may still suffer from 3D shape distortion. It is desirable to have a versatile auxiliary tool that is capable of generating 3D-adjusted laser processing path by measuring the 3D geometry of those irregular shape objects. This paper proposed the stereo vision laser galvanometric scanning system (SLGS), which takes the advantages of both the stereo vision solution and conventional LGS system. The 3D geometry of the object obtained by the stereo cameras is used to guide the scanning galvanometers for 3D-shape-adjusted laser processing. In order to achieve precise visual-servoed laser fabrication, these two independent components are integrated through a system calibration method using plastic thin film target. The flexibility of SLGS has been experimentally demonstrated by cutting duck feathers for badminton shuttle manufacture.

  12. High-contrast en bloc staining of neuronal tissue for field emission scanning electron microscopy.

    Science.gov (United States)

    Tapia, Juan Carlos; Kasthuri, Narayanan; Hayworth, Kenneth J; Schalek, Richard; Lichtman, Jeff W; Smith, Stephen J; Buchanan, JoAnn

    2012-01-12

    Conventional heavy metal poststaining methods on thin sections lend contrast but often cause contamination. To avoid this problem, we tested several en bloc staining techniques to contrast tissue in serial sections mounted on solid substrates for examination by field emission scanning electron microscopy (FESEM). Because FESEM section imaging requires that specimens have higher contrast and greater electrical conductivity than transmission electron microscopy (TEM) samples, our technique uses osmium impregnation (OTO) to make the samples conductive while heavily staining membranes for segmentation studies. Combining this step with other classic heavy metal en bloc stains, including uranyl acetate (UA), lead aspartate, copper sulfate and lead citrate, produced clean, highly contrasted TEM and scanning electron microscopy (SEM) samples of insect, fish and mammalian nervous systems. This protocol takes 7-15 d to prepare resin-embedded tissue, cut sections and produce serial section images.

  13. A compilation of cold cases using scanning electron microscopy at the University of Rhode Island

    Science.gov (United States)

    Platek, Michael J.; Gregory, Otto J.

    2015-10-01

    Scanning electron microscopy combined with microchemical analysis has evolved into one of the most widely used instruments in forensic science today. In particular, the environmental scanning electron microscope (SEM) in conjunction with energy dispersive spectroscopy (EDS), has created unique opportunities in forensic science in regard to the examination of trace evidence; i.e. the examination of evidence without altering the evidence with conductive coatings, thereby enabling criminalists to solve cases that were previously considered unsolvable. Two cold cases were solved at URI using a JEOL 5900 LV SEM in conjunction with EDS. A cold case murder and a cold missing person case will be presented from the viewpoint of the microscopist and will include sample preparation, as well as image and chemical analysis of the trace evidence using electron microscopy and optical microscopy.

  14. Growth of Pd-Filled Carbon Nanotubes on the Tip of Scanning Probe Microscopy

    Directory of Open Access Journals (Sweden)

    Tomokazu Sakamoto

    2009-01-01

    Full Text Available We have synthesized Pd-filled carbon nanotubes (CNTs oriented perpendicular to Si substrates using a microwave plasma-enhanced chemical vapor deposition (MPECVD for the application of scanning probe microscopy (SPM tip. Prior to the CVD growth, Al thin film (10 nm was coated on the substrate as a buffer layer followed by depositing a 5∼40 nm-thick Pd film as a catalyst. The diameter and areal density of CNTs grown depend largely on the initial Pd thickness. Scanning electron microscopy (SEM and transmission electron microscopy (TEM images clearly show that Pd is successfully encapsulated into the CNTs, probably leading to higher conductivity. Using optimum growth conditions, Pd-filled CNTs are successfully grown on the apex of the conventional SPM cantilever.

  15. An Airborne Scanning Laser Altimetry Survey of Long Valley, California

    Science.gov (United States)

    Hofton, M. A.; Blair, J. B.; Minster, J.-B.; Ridgway, J. R.; Williams, N. P.; Bufton, J. L.; Rabine, D. L.

    1999-01-01

    Between 28 September and 7 October 1995, we conducted an airborne laser altimetry experiment over the Long Valley caldera, California, in which each of two scanning laser altimeters (dubbed SLICER and RASCAL) were flown in a NASA T-39 jet aircraft. Operating concurrently were a Global Positioning System (GPS) guidance system and dual frequency receivers for precise navigation and post-flight calculation or the airplane trajectory relative to a ground station, and an inertial navigation system (INS) for attitude determination. Reduction of raw laser ranges requires merging the differential kinematic GPS aircraft trajectory and the INS data with the laser data, and determination of the atmospheric delay. Data geolocation consists of obtaining the centre location and the mean elevation within each footprint in a geodetic coordinate system. The elevation of Crowley Lake is recovered to an accuracy of approximately 3 cm or better from 3 km above ground level and crossover analysis indicates that the elevation estimates are consistent from pass to pass. We test our geolocation procedures by comparing laser-derived elevations with those determined in situ for recognizable ground features. A comparison of laser and GPS-derived positions shows that the horizontal accuracy is better than the diameter of the footprint and vertical accuracy is within the error inherent in the range measurement. A comparison of SLICER elevation data with digital elevation models (DEMs) of the region shows that the DEM data provides surface topography to within stated accuracy limits. Although research continues to utilize the full potential of laser altimetry data, our results constitute a successful demonstration that the technique may be used to perform geodetic monitoring of surface topographic changes.

  16. EDITORIAL: Three decades of scanning tunnelling microscopy that changed the course of surface science Three decades of scanning tunnelling microscopy that changed the course of surface science

    Science.gov (United States)

    Ramachandra Rao, M. S.; Margaritondo, Giorgio

    2011-11-01

    Three decades ago, with a tiny tip of platinum, the scientific world saw the real space imaging of single atoms with unprecedented spatial resolution. This signalled the birth of one of the most versatile surface probes, based on the physics of quantum mechanical tunnelling: the scanning tunnelling microscope (STM). Invented in 1981 by Gerd Binnig and Heinrich Rohrer of IBM, Zurich, it led to their award of the 1986 Nobel Prize. Atoms, once speculated to be abstract entities used by theoreticians for mere calculations, can be seen to exist for real with the nano-eye of an STM tip that also gives real-space images of molecules and adsorbed complexes on surfaces. From a very fundamental perspective, the STM changed the course of surface science and engineering. STM also emerged as a powerful tool to study various fundamental phenomena relevant to the properties of surfaces in technological applications such as tribology, medical implants, catalysis, sensors and biology—besides elucidating the importance of local bonding geometries and defects, non-periodic structures and the co-existence of nano-scale phases. Atom-level probing, once considered a dream, has seen the light with the evolution of STM. An important off-shoot of STM was the atomic force microscope (AFM) for surface mapping of insulating samples. Then followed the development of a flurry of techniques under the general name of scanning probe microscopy (SPM). These techniques (STM, AFM, MFM, PFM etc) designed for atomic-scale-resolution imaging and spectroscopy, have led to brand new developments in surface analysis. All of these novel methods enabled researchers in recent years to image and analyse complex surfaces on microscopic and nanoscopic scales. All of them utilize a small probe for sensing the surface. The invention of AFM by Gerd Binnig, Calvin Quate and Christopher Gerber opened up new opportunities for characterization of a variety of materials, and various industrial applications could be

  17. Comparison of solar and laser macula retinal injury using scanning laser ophthalmoscopy spectral imaging

    Science.gov (United States)

    Zwick, Harry; Gagliano, Donald A.; Stuck, Bruce E.; Lund, David J.

    1994-07-01

    Both solar and laser sources may induce punctate foveal retinal damage. Unprotected viewing of the sun or bright blue sky represent potential solar radiation causes of photic maculopathy that may induce punctate foveal damage. Laser induced macular retinal damage is another more recent kind of photic maculopathy. Most documented cases of laser photic maculopathy have involved acute laser exposure generally from Q-switched visible or nonvisible near IR laser systems. In our comparison of these types of photic maculopathies, we have employed conventional as well as spectral and confocal scanning laser ophthalomoscopy to evaluate the depth of the photic maculopathy. Functionally, we have observed a tritan color vision loss present in nearly all photic maculopathies.

  18. Implementation of a Coherent Anti-Stokes Raman Scattering (CARS) System on a Ti:Sapphire and OPO Laser Based Standard Laser Scanning Microscope.

    Science.gov (United States)

    Mytskaniuk, Vasyl; Bardin, Fabrice; Boukhaddaoui, Hassan; Rigneault, Herve; Tricaud, Nicolas

    2016-07-17

    Laser scanning microscopes combining a femtosecond Ti:sapphire laser and an optical parametric oscillator (OPO) to duplicate the laser line have become available for biologists. These systems are primarily designed for multi-channel two-photon fluorescence microscopy. However, without any modification, complementary non-linear optical microscopy such as second-harmonic generation (SHG) or third harmonic generation (THG) can also be performed with this set-up, allowing label-free imaging of structured molecules or aqueous medium-lipid interfaces. These techniques are well suited for in-vivo observation, but are limited in chemical specificity. Chemically selective imaging can be obtained from inherent vibration signals based on Raman scattering. Confocal Raman microscopy provides 3D spatial resolution, but it requires high average power and long acquisition time. To overcome these difficulties, recent advances in laser technology have permitted the development of nonlinear optical vibrational microscopy, in particular coherent anti-Stokes Raman scattering (CARS). CARS microscopy has therefore emerged as a powerful tool for biological and live cell imaging, by chemically mapping lipids (via C-H stretch vibration), water (via O-H stretch vibrations), proteins or DNA. In this work, we describe the implementation of the CARS technique on a standard OPO-coupled multiphoton laser scanning microscope. It is based on the in-time synchronization of the two laser lines by adjusting the length of one of the laser beam path. We present a step-by-step implementation of this technique on an existing multiphoton system. A basic background in experimental optics is helpful and the presented system does not require expensive supplementary equipment. We also illustrate CARS imaging obtained on myelin sheaths of sciatic nerve of rodent, and we show that this imaging can be performed simultaneously with other nonlinear optical imaging, such as standard two-photon fluorescence technique

  19. Codification of scan path parameters and development of perimeter scan strategies for 3D bowl-shaped laser forming

    Science.gov (United States)

    Tavakoli, A.; Naeini, H. Moslemi; Roohi, Amir H.; Gollo, M. Hoseinpour; Shahabad, Sh. Imani

    2018-01-01

    In the 3D laser forming process, developing an appropriate laser scan pattern for producing specimens with high quality and uniformity is critical. This study presents certain principles for developing scan paths. Seven scan path parameters are considered, including: (1) combined linear or curved path; (2) type of combined linear path; (3) order of scan sequences; (4) the position of the start point in each scan; (5) continuous or discontinuous scan path; (6) direction of scan path; and (7) angular arrangement of combined linear scan paths. Regarding these path parameters, ten combined linear scan patterns are presented. Numerical simulations show continuous hexagonal, scan pattern, scanning from outer to inner path, is the optimized. In addition, it is observed the position of the start point and the angular arrangement of scan paths is the most effective path parameters. Also, further experimentations show four sequences due to creat symmetric condition enhance the height of the bowl-shaped products and uniformity. Finally, the optimized hexagonal pattern was compared with the similar circular one. In the hexagonal scan path, distortion value and standard deviation rather to edge height of formed specimen is very low, and the edge height despite of decreasing length of scan path increases significantly compared to the circular scan path. As a result, four-sequence hexagonal scan pattern is proposed as the optimized perimeter scan path to produce bowl-shaped product.

  20. Quantitative scanning thermal microscopy of graphene devices on flexible polyimide substrates

    Science.gov (United States)

    Sadeghi, Mir Mohammad; Park, Saungeun; Huang, Yu; Akinwande, Deji; Yao, Zhen; Murthy, Jayathi; Shi, Li

    2016-06-01

    A triple-scan scanning thermal microscopy (SThM) method and a zero-heat flux laser-heated SThM technique are investigated for quantitative thermal imaging of flexible graphene devices. A similar local tip-sample thermal resistance is observed on both the graphene and metal areas of the sample, and is attributed to the presence of a polymer residue layer on the sample surface and a liquid meniscus at the tip-sample junction. In addition, it is found that the tip-sample thermal resistance is insensitive to the temperature until it begins to increase as the temperature increases to 80 °C and exhibits an abrupt increase at 110 °C because of evaporation of the liquid meniscus at the tip-sample junction. Moreover, the variation in the tip-sample thermal resistance due to surface roughness is within the experimental tolerance except at areas with roughness height exceeding tens of nanometers. Because of the low thermal conductivity of the flexible polyimide substrate, the SThM measurements have found that the temperature rise in flexible graphene devices is more than one order of magnitude higher than those reported for graphene devices fabricated on a silicon substrate with comparable dimensions and power density. Unlike a graphene device on a silicon substrate where the majority of the electrical heating in the graphene device is conducted vertically through the thin silicon dioxide dielectric layer to the high-thermal conductivity silicon substrate, lateral heat spreading is important in the flexible graphene devices, as shown by the observed decrease in the average temperature rise normalized by the power density with decreasing graphene channel length from about 30 μm to 10 μm. However, it is shown by numerical heat transfer analysis that this trend is mainly caused by the size scaling of the thermal spreading resistance of the polymer substrate instead of lateral heat spreading by the graphene. In addition, thermoelectric effects are found to be negligible

  1. Globally consistent registration of terrestrial laser scans via graph optimization

    Science.gov (United States)

    Theiler, Pascal Willy; Wegner, Jan Dirk; Schindler, Konrad

    2015-11-01

    In this paper we present a framework for the automatic registration of multiple terrestrial laser scans. The proposed method can handle arbitrary point clouds with reasonable pairwise overlap, without knowledge about their initial orientation and without the need for artificial markers or other specific objects. The framework is divided into a coarse and a fine registration part, which each start with pairwise registration and then enforce consistent global alignment across all scans. While we put forward a complete, functional registration system, the novel contribution of the paper lies in the coarse global alignment step. Merging multiple scans into a consistent network creates loops along which the relative transformations must add up. We pose the task of finding a global alignment as picking the best candidates from a set of putative pairwise registrations, such that they satisfy the loop constraints. This yields a discrete optimization problem that can be solved efficiently with modern combinatorial methods. Having found a coarse global alignment in this way, the framework proceeds by pairwise refinement with standard ICP, followed by global refinement to evenly spread the residual errors. The framework was tested on six challenging, real-world datasets. The discrete global alignment step effectively detects, removes and corrects failures of the pairwise registration procedure, finally producing a globally consistent coarse scan network which can be used as initial guess for the highly non-convex refinement. Our overall system reaches success rates close to 100% at acceptable runtimes < 1 h, even in challenging conditions such as scanning in the forest.

  2. The Registration and Segmentation of Heterogeneous Laser Scanning Data

    Science.gov (United States)

    Al-Durgham, Mohannad M.

    Light Detection And Ranging (LiDAR) mapping has been emerging over the past few years as a mainstream tool for the dense acquisition of three dimensional point data. Besides the conventional mapping missions, LiDAR systems have proven to be very useful for a wide spectrum of applications such as forestry, structural deformation analysis, urban mapping, and reverse engineering. The wide application scope of LiDAR lead to the development of many laser scanning technologies that are mountable on multiple platforms (i.e., airborne, mobile terrestrial, and tripod mounted), this caused variations in the characteristics and quality of the generated point clouds. As a result of the increased popularity and diversity of laser scanners, one should address the heterogeneous LiDAR data post processing (i.e., registration and segmentation) problems adequately. Current LiDAR integration techniques do not take into account the varying nature of laser scans originating from various platforms. In this dissertation, the author proposes a methodology designed particularly for the registration and segmentation of heterogeneous LiDAR data. A data characterization and filtering step is proposed to populate the points' attributes and remove non-planar LiDAR points. Then, a modified version of the Iterative Closest Point (ICP), denoted by the Iterative Closest Projected Point (ICPP) is designed for the registration of heterogeneous scans to remove any misalignments between overlapping strips. Next, a region-growing-based heterogeneous segmentation algorithm is developed to ensure the proper extraction of planar segments from the point clouds. Validation experiments show that the proposed heterogeneous registration can successfully align airborne and terrestrial datasets despite the great differences in their point density and their noise level. In addition, similar testes have been conducted to examine the heterogeneous segmentation and it is shown that one is able to identify common

  3. Measurement of focused ultrasonic fields using a scanning laser vibrometer.

    Science.gov (United States)

    Wang, Yuebing; Tyrer, John; Zhihong, Ping; Shiquan, Wang

    2007-05-01

    With the development of optical techniques, scanning laser vibrometers have been applied successfully in measuring particle velocities and distributions in ultrasonic fields. In this paper, to develop the optical interferometry in measuring focused fields with small amplitude, the "effective" refractive index used for plane waves and extended for spherical waves is presented, the piezo-optic effect as a function of the incident angle of the laser beam is simulated, and the ultrasonic field produced by a concave spherical transducer is calculated numerically around its focal region. To verify the feasibility of the optical method in detecting focused ultrasonic fields, a measurement system was set up that utilized both a scanning laser vibrometer and a membrane hydrophone. Measurements were made in different zones of a focusing transducer, and good results were acquired from the optical interferometry in regions where acoustic waves travel in plane form or spherical form. The data obtained from the optical method are used to reconstruct acoustic fields, and it is found that the focal plane, the maximum pressure, and the beamwidth of the transducer can be forecasted accurately.

  4. LAND-BASED MOBILE LASER SCANNING SYSTEMS: A REVIEW

    Directory of Open Access Journals (Sweden)

    I. Puente

    2012-09-01

    Full Text Available Mobile mapping has been using various photogrammetric techniques for many years. In recent years, there has been an increase in the number of mobile mapping systems using laser scanners available in the market, partially because of the improvement in GNSS/INS performance for direct georeferencing. In this article, some of the most important land-based mobile laser scanning (MLS systems are reviewed. Firstly, the main characteristics of MLS systems vs. airborne (ALS and terrestrial laser scanning (TLS systems are compared. Secondly, a short overview of the mobile mapping technology is also provided so that the reader can fully grasp the complexity and operation of these devices. As we put forward in this paper, a comparison of different systems is briefly carried out regarding specifications provided by the manufacturers. Focuses on the current research are also addressed with emphasis on the practical applications of these systems. Most of them have been utilized for data collection on road infrastructures or building façades. This article shows that MLS technology is nowadays well established and proven, since the demand has grown to the point that there are several systems suppliers offering their products to satisfy this particular market.

  5. SEMI - AUTOMATED BUILDING E XTRACTION FROM AIRBORNE LASER SCANNING DATA

    Directory of Open Access Journals (Sweden)

    Marjasiewicz Marcin

    2014-12-01

    Full Text Available The main idea of this project is to introduce a conception of semi - automated method for building model extraction from Airborne Laser Scanning data. The presented method is based on the RANSAC algorithm, which provides automatic collection planes for roofs model creation. In the case of Airborne Laser Scanning, the algorithm can process point clouds influenced with noise and erroneous measurement (gross errors. The RANSAC algorithm is based on the iterative processing of a set of points in order to estimate the geometric model. Research of u sing algorithm for ALS data was performed in available Cloud Compare and SketchUP software. An important aspect in this research was algorithm parameters selection, which was made on the basis of characteristics of point cloud and scanned objects. Analysis showed that the accuracy of plane extraction with RANSAC algorithm does not exceed 20 centimeters for point clouds of density 4 pts . /m 2 . RANSAC can be successfully used in buildings modelling based on ALS data. Roofs created by the presented method could be used in visualizations on a much better level than Level of Detail 2 by CityGML standard. If model is textured it can represent LoD3 standard.

  6. Optical video projection using laser beam scanning technology

    Science.gov (United States)

    Clynick, Tony J.

    1993-12-01

    Various techniques are currently used to project video images. One of these, described in a previous paper by the author, operates by mechanical scanning of a laser beam with acousto- optic modulation, and has been proven suitable for high definition television and computer display scan rates by use of novel electronic and optical compensation methods. The requirement for improved image intensity with greater efficiency has led to a re-appraisal of the selection of the light source and the relationship between the light source, the form of the modulator, and the method of scanning. The electrical input to visible radiation output ratio of the Argon-ion lasers currently used in the projector shows efficiency to be as low as 0.001%, a factor limiting the commercial exploitation of the projector. Recent developments in acousto- optics can be applied to the projector's optical system allowing alternative light sources to be used. These help to reduce the complexity of both the optical and signal processing stages as well as improve efficiency.

  7. Plasma-deposited fluorocarbon films: insulation material for microelectrodes and combined atomic force microscopy-scanning electrochemical microscopy probes.

    Science.gov (United States)

    Wiedemair, Justyna; Balu, Balamurali; Moon, Jong-Seok; Hess, Dennis W; Mizaikoff, Boris; Kranz, Christine

    2008-07-01

    Pinhole-free insulation of micro- and nanoelectrodes is the key to successful microelectrochemical experiments performed in vivo or in combination with scanning probe experiments. A novel insulation technique based on fluorocarbon insulation layers deposited from pentafluoroethane (PFE, CF3CHF2) plasmas is presented as a promising electrical insulation approach for microelectrodes and combined atomic force microscopy-scanning electrochemical microscopy (AFM-SECM) probes. The deposition allows reproducible and uniform coating, which is essential for many analytical applications of micro- and nanoelectrodes such as, e.g., in vivo experiments and SECM experiments. Disk-shaped microelectrodes and frame-shaped AFM tip-integrated electrodes have been fabricated by postinsulation focused ion beam (FIB) milling. The thin insulation layer for combined AFM-SECM probes renders this fabrication technique particularly useful for submicro insulation providing radius ratios of the outer insulation versus the disk electrode (RG values) suitable for SECM experiments. Characterization of PFE-insulated AFM-SECM probes will be presented along with combined AFM-SECM approach curves and imaging.

  8. Auto-calibrated scanning-angle prism-type total internal reflection microscopy for nanometer-precision axial position determination and optional variable-illumination-depth pseudo total internal reflection microscopy

    Science.gov (United States)

    Fang, Ning; Sun, Wei

    2015-04-21

    A method, apparatus, and system for improved VA-TIRFM microscopy. The method comprises automatically controlled calibration of one or more laser sources by precise control of presentation of each laser relative a sample for small incremental changes of incident angle over a range of critical TIR angles. The calibration then allows precise scanning of the sample for any of those calibrated angles for higher and more accurate resolution, and better reconstruction of the scans for super resolution reconstruction of the sample. Optionally the system can be controlled for incident angles of the excitation laser at sub-critical angles for pseudo TIRFM. Optionally both above-critical angle and sub critical angle measurements can be accomplished with the same system.

  9. Lateral spatial resolution of thermal lens microscopy during continuous scanning for nonstaining biofilm imaging

    Science.gov (United States)

    Rossteuscher, T. T. J.; Hibara, A.; Mawatari, K.; Kitamori, T.

    2009-05-01

    The possible application of continuous scanning thermal lens microscopy (TLM) as alternative online biofilm observation method is studied. As biofilm is a heterogeneous sample, the influence of spatially limited thermal flow at the sample heterogeneities and the biofilm-environment border has to be considered. The influence of the edges on the lateral resolution with respect to scanning velocity during continuous scanning TLM was therefore evaluated. Lateral scanning experiments on 100 nm thin gold stripes showed that the maximum scan speed can be predicted from a time constant of a lock-in amplifier and the beamwidth. Since three-dimensional mapping is needed to fully characterize the biofilm structure, depth scanning experiments with stained 4 μm thick polystyrene samples with the coaxial TLM setup were evaluated for signal width at full width at half maximum. Thus, a minimum step width for depth scanning of 10 μm for observation has been acquired. A three-dimensional image of unstained biofilm grown in a flow chamber was acquired using continuous scanning TLM.

  10. The Use Of Scanning Probe Microscopy To Investigate Crystal-Fluid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C A; Giocondi, J L

    2007-04-16

    Over the past decade there has been a natural drive to extend the investigation of dynamic surfaces in fluid environments to higher resolution characterization tools. Various aspects of solution crystal growth have been directly visualized for the first time. These include island nucleation and growth using transmission electron microscopy and scanning tunneling microscopy; elemental step motion using scanning probe microscopy; and the time evolution of interfacial atomic structure using various diffraction techniques. In this lecture we will discuss the use of one such in situ method, scanning probe microscopy, as a means of measuring surface dynamics during crystal growth and dissolution. We will cover both practical aspects of imaging such as environmental control, fluid flow, and electrochemical manipulation, as well as the types of physical measurements that can be made. Measurements such as step motion, critical lengths, nucleation density, and step fluctuations, will be put in context of the information they provide about mechanistic processes at surfaces using examples from metal and mineral crystal growth.

  11. Characterization of tip size and geometry of the pipettes used in scanning ion conductance microscopy.

    Science.gov (United States)

    Tognoni, Elisabetta; Baschieri, Paolo; Ascoli, Cesare; Pellegrini, Monica; Pellegrino, Mario

    2016-04-01

    Scanning ion-conductance microscopy (SICM) belongs to the family of scanning-probe microscopies. The spatial resolution of these techniques is limited by the size of the probe. In SICM the probe is a pipette, obtained by heating and pulling a glass capillary tubing. The size of the pipette tip is therefore an important parameter in SICM experiments. However, the characterization of the tip is not a consolidated routine in SICM experimental practice. In addition, potential and limitations of the different methods available for this characterization may not be known to all users. We present an overview of different methods for characterizing size and geometry of the pipette tip, with the aim of collecting and facilitating the use of several pieces of information appeared in the literature in a wide interval of time under different disciplines. In fact, several methods that have been developed for pipettes used in cell physiology can be also fruitfully employed in the characterization of the SICM probes. The overview includes imaging techniques, such as scanning electron microscopy and atomic Force microscopy, and indirect methods, which measure some physical parameter related to the size of the pipette. Examples of these parameters are the electrical resistance of the pipette filled with a saline solution and the surface tension at the pipette tip. We discuss advantages and drawbacks of the methods, which may be helpful in answering a wide range of experimental questions. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Scanning probe microscopy: instrumentation and applications on thin films and magnetic multilayers.

    Science.gov (United States)

    Karoutsos, Vagelis

    2009-12-01

    In this article we present a review on instrumentation and the modes of operation of a scanning probe microscope. In detail, we review the main techniques of Scanning Probe Microscopy (SPM), which are Scanning Tunneling Microscopy (STM) and Atomic Force Microscopy (AFM), focusing our attention on the latter one. The AFM instrument provides information on the roughness and grain size of thin films. As an example we review recent results on two metallic thin film systems: thin Ag films deposited on glass, and Ni/Pt compositionally modulated multilayers deposited on glass, Si, and polyimide substrates. To show the validity of the grain size measurements, we compare the data with the ones resulting from X-ray diffraction (XRD) measurements. We show that the AFM results are reliable for grain diameters as small as 14 nm, which is approximately comparable to the tip radius. Finally, we deal with Magnetic Force Microscopy (MFM) results on Co/Pt and Co/Au multilayers. We observe perpendicularly magnetized domains. The domain configurations are correlated to the magnetization hysteresis curves.

  13. Road Orthophoto/dtm Generation from Mobile Laser Scanning

    Science.gov (United States)

    Vallet, B.; Papelard, J.-P.

    2015-08-01

    This paper proposes a pipeline to produce road orthophoto and DTM from Mobile Laser Scanning (MLS). For the ortho, modern laser scanners provide a reflectance information allowing for high quality grayscale images, at a much finer resolution than aerial photography can offer. For DTM, MLS offers a much higher accuracy and density than aerial products. This increased precision and resolution leverages new applications for both ortho and DEM. The first task is to filter ground vs non ground, then an interpolation is conducted to build image tiles from the filtered points. Finally, multiple layers are registered and blended to allow for seamless fusion. Our proposed approach achieves high quality products and scaling up is demonstrated.

  14. Membrane Vibration Studies Using a Scanning Laser Vibrometer

    Science.gov (United States)

    Gaspar, James L.; Solter, Micah J.; Pappa, Richard S.

    2001-01-01

    This paper summarizes on-going experimental work at NASA Langley Research Center to measure the dynamics of a 1.016 m (40 in.) square polyimide film Kapton membrane. A fixed fully automated impact hammer and Polytec PSV-300-H scanning laser vibrometer were used for non-contact modal testing of the membrane with zero-mass-loading. The paper discusses the results obtained by testing the membrane at various tension levels and at various excitation locations. Results obtained by direct shaker excitation to the membrane are also discussed.

  15. Noninvasive redox and back-scattered light imaging of keratocyte cells in the cornea: two-photon excitation and scanning slit confocal microscopy

    Science.gov (United States)

    Masters, Barry R.

    1995-04-01

    The ability to image and monitor the metabolic activity of keratocytes is important for the investigation of wound healing and repair mechanisms in the cornea. After laser refractive surgery there is activation of the stromal keratocytes in the human cornea. Two-photon excitation laser scanning microscopy was used to monitor the NAD(P)H levels in keratocytes in the cornea. The autofluorescence was confirmed to be mostly of NAD(P)H origin by treatment with cyanide which caused an increase in the fluorescence by a factor of two. We used a real-time scanning slit confocal microscope to image the distribution of keratocytes in the full thickness of the cornea. This microscope has the ability to image the cellular processes as well as the nuclei of the stromal keratocytes. Noninvasive optical imaging may provide a useful tool to investigate keratocyte activation after laser surgery or wound healing.

  16. The use of scanning ion conductance microscopy to image A6 cells.

    Science.gov (United States)

    Gorelik, Julia; Zhang, Yanjun; Shevchuk, Andrew I; Frolenkov, Gregory I; Sánchez, Daniel; Lab, Max J; Vodyanoy, Igor; Edwards, Christopher R W; Klenerman, David; Korchev, Yuri E

    2004-03-31

    Continuous high spatial resolution observations of living A6 cells would greatly aid the elucidation of the relationship between structure and function and facilitate the study of major physiological processes such as the mechanism of action of aldosterone. Unfortunately, observing the micro-structural and functional changes in the membrane of living cells is still a formidable challenge for a microscopist. Scanning ion conductance microscopy (SICM), which uses a glass nanopipette as a sensitive probe, has been shown to be suitable for imaging non-conducting surfaces bathed in electrolytes. A specialized version of this microscopy has been developed by our group and has been applied to image live cells at high-resolution for the first time. This method can also be used in conjunction with patch clamping to study both anatomy and function and identify ion channels in single cells. This new microscopy provides high-resolution images of living renal cells which are comparable with those obtained by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Continuous 24h observations under normal physiological conditions showed how A6 kidney epithelial cells changed their height, volume, and reshaped their borders. The changes in cell area correlated with the density of microvilli on the surface. Surface microvilli density ranged from 0.5 microm(-2) for extended cells to 2.5 microm(2) for shrunk cells. Patch clamping of individual cells enabled anatomy and function to be correlated. Scanning ion conductance microscopy provides unique information about living cells that helps to understand cellular function. It has the potential to become a powerful tool for research on living renal cells.

  17. Image scanning fluorescence emission difference microscopy based on a detector array.

    Science.gov (United States)

    Li, Y; Liu, S; Liu, D; Sun, S; Kuang, C; Ding, Z; Liu, X

    2017-06-01

    We propose a novel imaging method that enables the enhancement of three-dimensional resolution of confocal microscopy significantly and achieve experimentally a new fluorescence emission difference method for the first time, based on the parallel detection with a detector array. Following the principles of photon reassignment in image scanning microscopy, images captured by the detector array were arranged. And by selecting appropriate reassign patterns, the imaging result with enhanced resolution can be achieved with the method of fluorescence emission difference. Two specific methods are proposed in this paper, showing that the difference between an image scanning microscopy image and a confocal image will achieve an improvement of transverse resolution by approximately 43% compared with that in confocal microscopy, and the axial resolution can also be enhanced by at least 22% experimentally and 35% theoretically. Moreover, the methods presented in this paper can improve the lateral resolution by around 10% than fluorescence emission difference and 15% than Airyscan. The mechanism of our methods is verified by numerical simulations and experimental results, and it has significant potential in biomedical applications. © 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.

  18. Imaging metazoan nuclear pore complexes by field emission scanning electron microscopy.

    Science.gov (United States)

    Fichtman, Boris; Shaulov, Lihi; Harel, Amnon

    2014-01-01

    High resolution three-dimensional surface images of nuclear pore complexes (NPCs) can be obtained by field emission scanning electron microscopy. We present a short retrospective view starting from the early roots of microscopy, through the discovery of the cell nucleus and the development of some modern techniques for sample preparation and imaging. Detailed protocols are presented for assembling anchored nuclei in a Xenopus cell-free reconstitution system and for the exposure of the nuclear surface in mammalian cell nuclei. Immunogold labeling of metazoan NPCs and a promising new technique for delicate coating with iridium are also discussed. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Line scan--structured illumination microscopy super-resolution imaging in thick fluorescent samples.

    Science.gov (United States)

    Mandula, Ondrej; Kielhorn, Martin; Wicker, Kai; Krampert, Gerhard; Kleppe, Ingo; Heintzmann, Rainer

    2012-10-22

    Structured illumination microscopy in thick fluorescent samples is a challenging task. The out-of-focus fluorescence background deteriorates the illumination pattern and the reconstructed images suffer from influence of noise. We present a combination of structured illumination microscopy with line scanning. This technique reduces the out-of-focus fluorescence background, which improves the modulation and the quality of the illumination pattern and therefore facilitates the reconstruction. We present super-resolution, optically sectioned images of a thick fluorescent sample, revealing details of the specimen's inner structure.

  20. Optical microscope illumination analysis using through-focus scanning optical microscopy.

    Science.gov (United States)

    Attota, Ravi Kiran; Park, Haesung

    2017-06-15

    Misalignment of the aperture diaphragm present in optical microscopes results in angular illumination asymmetry (ANILAS) at the sample plane. Here we show that through-focus propagation of ANILAS results in a lateral image shift with a focus position. This could lead to substantial errors in quantitative results for optical methods that use through-focus images such as three-dimensional nanoparticle tracking, confocal microscopy, and through-focus scanning optical microscopy (TSOM). A correlation exists between ANILAS and the slant in TSOM images. Hence, the slant in the TSOM image can be used to detect, analyze, and rectify the presence of ANILAS.