WorldWideScience

Sample records for satellite vicarious calibration

  1. NIR- and SWIR-based on-orbit vicarious calibrations for satellite ocean color sensors.

    Science.gov (United States)

    Wang, Menghua; Shi, Wei; Jiang, Lide; Voss, Kenneth

    2016-09-05

    The near-infrared (NIR) and shortwave infrared (SWIR)-based atmospheric correction algorithms are used in satellite ocean color data processing, with the SWIR-based algorithm particularly useful for turbid coastal and inland waters. In this study, we describe the NIR- and two SWIR-based on-orbit vicarious calibration approaches for satellite ocean color sensors, and compare results from these three on-orbit vicarious calibrations using satellite measurements from the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP). Vicarious calibration gains for VIIRS spectral bands are derived using the in situ normalized water-leaving radiance nLw(λ) spectra from the Marine Optical Buoy (MOBY) in waters off Hawaii. The SWIR vicarious gains are determined using VIIRS measurements from the South Pacific Gyre region, where waters are the clearest and generally stable. Specifically, vicarious gain sets for VIIRS spectral bands of 410, 443, 486, 551, and 671 nm derived from the NIR method using the NIR 745 and 862 nm bands, the SWIR method using the SWIR 1238 and 1601 nm bands, and the SWIR method using the SWIR 1238 and 2257 nm bands are (0.979954, 0.974892, 0.974685, 0.965832, 0.979042), (0.980344, 0.975344, 0.975357, 0.965531, 0.979518), and (0.980820, 0.975609, 0.975761, 0.965888, 0.978576), respectively. Thus, the NIR-based vicarious calibration gains are consistent with those from the two SWIR-based approaches with discrepancies mostly within ~0.05% from three data processing methods. In addition, the NIR vicarious gains (745 and 862 nm) derived from the two SWIR methods are (0.982065, 1.00001) and (0.981811, 1.00000), respectively, with the difference ~0.03% at the NIR 745 nm band. This is the fundamental basis for the NIR-SWIR combined atmospheric correction algorithm, which has been used to derive improved satellite ocean color products over open oceans and turbid coastal/inland waters. Therefore, a unified

  2. Vicarious Calibration Based Cross Calibration of Solar Reflective Channels of Radiometers Onboard Remote Sensing Satellite and Evaluation of Cross Calibration Accuracy through Band-to-Band Data Comparisons

    Directory of Open Access Journals (Sweden)

    Kohei Arai

    2013-04-01

    Full Text Available Accuracy evaluation of cross calibration through band-to-band data comparison for visible and near infrared radiometers which onboard earth observation satellites is conducted. The conventional cross calibration for visible to near infrared radiometers onboard earth observation satellites is conducted through comparisons of band-to-band data of which spectral response functions are overlapped mostly. There are the following major error sources due to observation time difference, spectral response function difference in conjunction of surface reflectance and atmospheric optical depth, observation area difference. These error sources are assessed with dataset acquired through ground measurements of surface reflectance and optical depth. Then the accuracy of the conventional cross calibration is evaluated with vicarious calibration data. The results show that cross calibration accuracy can be done more precisely if the influences due to the aforementioned three major error sources are taken into account.

  3. Site characterization for calibration of radiometric sensors using vicarious method

    Science.gov (United States)

    Parihar, Shailesh; Rathore, L. S.; Mohapatra, M.; Sharma, A. K.; Mitra, A. K.; Bhatla, R.; Singh, R. S.; Desai, Yogdeep; Srivastava, Shailendra S.

    2016-05-01

    Radiometric performances of earth observation satellite/sensors vary from ground pre-launch calibration campaign to post launch period extended to lifetime of the satellite due to launching vibrations. Therefore calibration is carried out worldwide through various methods throughout satellite lifetime. In India Indian Space Research Organization (ISRO) calibrates the sensor of Resourcesat-2 satellite by vicarious method. One of these vicarious calibration methods is the reflectance-based approach that is applied in this study for radiometric calibration of sensors on-board Resouresat-2 satellite. The results of ground-based measurement of atmospheric conditions and surface reflectance are made at Bap, Rajasthan Calibration/Validation (Cal/Val) site. Cal/Val observations at site were carried out with hyper-spectral Spectroradiometer covering spectral range of 350nm- 2500nm for radiometric characterization of the site. The Sunphotometer/Ozonometer for measuring the atmospheric parameters has also been used. The calibrated radiance is converted to absolute at-sensor spectral reflectance and Top-Of-Atmosphere (TOA) radiance. TOA radiance was computed using radiative transfer model `Second simulation of the satellite signal in the solar spectrum' (6S), which can accurately simulate the problems introduced by the presence of the atmosphere along the path from Sun to target (surface) to Sensor. The methodology for band averaged reflectance retrieval and spectral reflectance fitting process are described. Then the spectral reflectance and atmospheric parameters are put into 6S code to predict TOA radiance which compare with Resourcesat-2 radiance. Spectral signature and its reflectance ratio indicate the uniformity of the site. Thus the study proves that the selected site is suitable for vicarious calibration of sensor of Resourcesat-2. Further the study demonstrates the procedure for similar exercise for site selection for Cal/Val analysis of other satellite over India

  4. Bathymetry estimations using vicariously calibrated HICO data

    Science.gov (United States)

    Lewis, David; Gould, Richard W.; Weidemann, Alan; Ladner, Sherwin; Lee, Zhongping

    2013-06-01

    The Hyperspectral Imager for the Coastal Ocean (HICO) is a prototype sensor installed on the International Space Station (ISS) designed to explore the management and capability of a space-borne hyperspectral sensor. The Office of Naval Research (ONR) funded the development and management of HICO. The Naval Research Laboratory (NRL) built and is involved in management of the HICO sensor. Bathymetry information is essential for naval operations in coastal regions. However, bathymetry may not be available in denied areas. HICO has a 100 meter spatial resolution, which makes it more capable for providing information within bays and estuaries than other sensors with coarser resolutions. Furthermore, its contiguous hyperspectral range is well suited to be used as input to the Hyperspectral Optimization Process Exemplar (HOPE) algorithm, which along with other absorption and backscattering values, estimates bottom albedo and water depth. Vicarious calibration uses in situ data to generate new gains and offsets that when applied to the top-of-atmosphere radiance values improves atmospheric correction results and the measurement of normalized water-leaving radiances. In situ remote sensing reflectance data collected in St. Andrews Bay were used to vicariously calibrate a coincident HICO scene. NRL's Automated Processing System (APS) was used to perform atmospheric correction and estimation of remote sensing reflectance (Rrs). The HOPE algorithm used the vicariously calibrated HICO Rrs values to estimate water depth. The results were validated with bathymetry maps from the NOAA National Ocean Service (NOS).

  5. Vicarious Calibration of Beijing-1 Multispectral Imagers

    Directory of Open Access Journals (Sweden)

    Zhengchao Chen

    2014-02-01

    Full Text Available For on-orbit calibration of the Beijing-1 multispectral imagers (Beijing-1/MS, a field calibration campaign was performed at the Dunhuang calibration site during September and October of 2008. Based on the in situ data and images from Beijing-1 and Terra/Moderate Resolution Imaging Spectroradiometer (MODIS, three vicarious calibration methods (i.e., reflectance-based, irradiance-based, and cross-calibration were used to calculate the top-of-atmosphere (TOA radiance of Beijing-1. An analysis was then performed to determine or identify systematic and accidental errors, and the overall uncertainty was assessed for each individual method. The findings show that the reflectance-based method has an uncertainty of more than 10% if the aerosol optical depth (AOD exceeds 0.2. The cross-calibration method is able to reach an error level within 7% if the images are selected carefully. The final calibration coefficients were derived from the irradiance-based data for 6 September 2008, with an uncertainty estimated to be less than 5%.

  6. Vicarious absolute radiometric calibration of GF-2 PMS2 sensor using permanent artificial targets in China

    Science.gov (United States)

    Liu, Yaokai; Li, Chuanrong; Ma, Lingling; Wang, Ning; Qian, Yonggang; Tang, Lingli

    2016-10-01

    GF-2, launched on August 19 2014, is one of the high-resolution land resource observing satellite of the China GF series satellites plan. The radiometric performance evaluation of the onboard optical pan and multispectral (PMS2) sensor of GF-2 satellite is very important for the further application of the data. And, the vicarious absolute radiometric calibration approach is one of the most useful way to monitor the radiometric performance of the onboard optical sensors. In this study, the traditional reflectance-based method is used to vicarious radiometrically calibrate the onboard PMS2 sensor of GF-2 satellite using three black, gray and white reflected permanent artificial targets located in the AOE Baotou site in China. Vicarious field calibration campaign were carried out in the AOE-Baotou calibration site on 22 April 2016. And, the absolute radiometric calibration coefficients were determined with in situ measured atmospheric parameters and surface reflectance of the permanent artificial calibration targets. The predicted TOA radiance of a selected desert area with our determined calibrated coefficients were compared with the official distributed calibration coefficients. Comparison results show a good consistent and the mean relative difference of the multispectral channels is less than 5%. Uncertainty analysis was also carried out and a total uncertainty with 3.87% is determined of the TOA radiance.

  7. On-orbit lunar calibration compared with vicarious calibration for GOSAT

    Science.gov (United States)

    Shiomi, K.; Kawakami, S.; kuze, A.; Suto, H.; Hashiguchi, T.; Kataoka, F.; Higuchi, R.; Bruegge, C.; Schwandner, F. M.

    2013-12-01

    JAXA's Greenhouse Gases Observing Satellite (GOSAT) is since 2009 in polar orbit to monitor greenhouse gases such as CO2 and CH4 from space. GOSAT consists of a Fourier Transform Spectrometer (TANSO-FTS) and a Cloud and Aerosol Imager (TANSO-CAI). The FTS has 3 polarized SWIR narrow bands and a TIR wide band. The FTS observes globally with gridded points of 10 km FOV using discrete pointing. The CAI carries 4 radiometers in the UV to SWIR with high spatial resolution of 0.5-1.5 km and a wide swath of 1000 km. In this study, we compare the lunar calibration results with the results of our annual vicarious calibration campaigns. For lunar calibrations, GOSAT observes a nearly full moon for the on-orbit radiometric calibration of the FTS SWIR bands and the CAI. Lunar calibrations are operated in April for investigation of continuous annual sensitivity trends and in July, corresponding to the annual Railroad Valley Cal/Val campaign. Since the 3rd year, lunar calibration has been planned to observe in a phase angle around 7 degrees to avoid the reflectance opposition surge in order to target the nearly-unchanged and brightest reflectance as a function of phase angle. The Railroad Valley vicarious calibration campaign is conducted by measuring the surface reflectance and atmospheric parameters coincident with a dedicated GOSAT target observation, to derive top-of-the-atmosphere radiance. The nadir surface reflectance is collected in 500x500 m areas corresponding to the CAI resolution. The off-nadir reflectance is obtained simultaneously with BRDF values, for correction. We will discuss the sensitivity study by comparison between the GOSAT lunar observation and the vicarious calibration.

  8. Campaign for vicarious calibration of SumbandilaSat in Argentina

    CSIR Research Space (South Africa)

    Vhengani, LM

    2011-07-01

    Full Text Available to estimate Top-Of-Atmosphere (TOA) spectral radiance. A vicarious calibration field campaign was executed in Argentina to support monitoring of the radiometric response of the multispectral imager aboard SumbandilaSat. Results obtained using two Radiative...

  9. Radiometric trend of lunar calibration compared with vicarious calibration for GOSAT

    Science.gov (United States)

    Shiomi, K.; Kawakami, S.; Kuze, A.; Suto, H.; Hashiguchi, T.; Kataoka, F.; Higuchi, R.; Bruegge, C. J.; Schwandner, F. M.; Chapsky, L.

    2014-12-01

    GOSAT observes a nearly full moon for the on-orbit radiometric calibration of the FTS SWIR bands and the CAI. Lunar calibrations are operated in April/May for investigation of continuous annual radiometric trends and in June/July, corresponding to the annual Railroad Valley Cal/Val campaign. JAXA's Greenhouse Gases Observing Satellite (GOSAT) is since 2009 in polar orbit to monitor greenhouse gases such as CO2 and CH4 from space. GOSAT consists of a Fourier Transform Spectrometer (TANSO-FTS) and a Cloud and Aerosol Imager (TANSO-CAI). The FTS has 3 polarized SWIR narrow bands and a TIR wide band. The FTS observes globally with gridded points of 10 km FOV using discrete pointing. The CAI carries 4 radiometers in the UV to SWIR with high spatial resolution of 0.5-1.5 km and a wide swath of 1000 km. Since the 3rd year, lunar calibration has been planned to observe at a phase angle around 7 degrees from normal incidence. This choice avoids the reflectance opposition surge in order to target the nearly-unchanged and brightest reflectance as a function of phase angle. The Railroad Valley vicarious calibration campaign is conducted by measuring the surface reflectance and atmospheric parameters coincident with a dedicated GOSAT target observation, to derive top-of-the-atmosphere radiance. The nadir surface reflectance is collected in 500x500 m areas corresponding to the CAI resolution. The off-nadir reflectance is measured simultaneously with BRDF values, for correction. We will summarize the radiometric study of the GOSAT lunar calibration compared with the vicarious calibration. In-flight coincident calibration activities will continue with GOSAT and OCO-2.

  10. Landsat-8 Thermal Infrared Sensor (TIRS Vicarious Radiometric Calibration

    Directory of Open Access Journals (Sweden)

    Julia A. Barsi

    2014-11-01

    Full Text Available Launched in February 2013, the Landsat-8 carries on-board the Thermal Infrared Sensor (TIRS, a two-band thermal pushbroom imager, to maintain the thermal imaging capability of the Landsat program. The TIRS bands are centered at roughly 10.9 and 12 μm (Bands 10 and 11 respectively. They have 100 m spatial resolution and image coincidently with the Operational Land Imager (OLI, also on-board Landsat-8. The TIRS instrument has an internal calibration system consisting of a variable temperature blackbody and a special viewport with which it can see deep space; a two point calibration can be performed twice an orbit. Immediately after launch, a rigorous vicarious calibration program was started to validate the absolute calibration of the system. The two vicarious calibration teams, NASA/Jet Propulsion Laboratory (JPL and the Rochester Institute of Technology (RIT, both make use of buoys deployed on large water bodies as the primary monitoring technique. RIT took advantage of cross-calibration opportunity soon after launch when Landsat-8 and Landsat-7 were imaging the same targets within a few minutes of each other to perform a validation of the absolute calibration. Terra MODIS is also being used for regular monitoring of the TIRS absolute calibration. The buoy initial results showed a large error in both bands, 0.29 and 0.51 W/m2·sr·μm or −2.1 K and −4.4 K at 300 K in Band 10 and 11 respectively, where TIRS data was too hot. A calibration update was recommended for both bands to correct for a bias error and was implemented on 3 February 2014 in the USGS/EROS processing system, but the residual variability is still larger than desired for both bands (0.12 and 0.2 W/m2·sr·μm or 0.87 and 1.67 K at 300 K. Additional work has uncovered the source of the calibration error: out-of-field stray light. While analysis continues to characterize the stray light contribution, the vicarious calibration work proceeds. The additional data have not changed

  11. Vicarious calibration of the multiviewing channel polarisation imager (3MI) of the EUMETSAT Polar System-Second Generation (EPS-SG)

    Science.gov (United States)

    Marbach, T.; Fougnie, B.; Lacan, A.; Schlüssel, P.

    2016-10-01

    The Multi-Viewing -Channel -Polarization Imager (3MI), planned to fly on the Metop-SG satellite as part of the EPS-SG programme in the timeframe beyond 2020, is a radiometer dedicated to aerosol and cloud characterization for climate monitoring, atmospheric composition, air quality and numerical weather prediction. The purpose of the 3MI is to provide multi-spectral (12 channels between 410 and 2130 nm), multi-polarization (-60°, 0°, and +60°), and multi-angular (10 to 14 views) images of the Earth top of atmosphere outgoing radiance. 3MI does not have an onboard calibration facility and its radiometric and geometric performance will rely on vicarious calibration. The aim of this paper is to present the state of the art of vicarious calibration methods applicable to 3MI. The 3MI measurement principle is based on the French atmospheric mission PARASOL (Polarization and Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar) heritage [1]. This allows adapting the vicarious calibration methods of the PARASOL mission to the needs of 3MI. However, the monitoring of the SWIR (short wave infrared) channels will be a new challenge for the 3MI calibration as this spectral range was not present on PARASOL. The cross-calibration with other instruments flying on the same satellite will support the calibration of 3MI. Indeed the Metop-SG payload includes two other optical instruments covering the same spectral regions. METimage and Sentinel-5 will both be equipped with on-board calibration capabilities and provide valuable measurements for vicarious calibration of 3MI. Further cross-calibration with Earth observation instruments on other satellites, will be studied.

  12. Design of an ultra-portable field transfer radiometer supporting automated vicarious calibration

    Science.gov (United States)

    Anderson, Nikolaus; Thome, Kurtis; Czapla-Myers, Jeffrey; Biggar, Stuart

    2015-09-01

    The University of Arizona Remote Sensing Group (RSG) began outfitting the radiometric calibration test site (RadCaTS) at Railroad Valley Nevada in 2004 for automated vicarious calibration of Earth-observing sensors. RadCaTS was upgraded to use RSG custom 8-band ground viewing radiometers (GVRs) beginning in 2011 and currently four GVRs are deployed providing an average reflectance for the test site. This measurement of ground reflectance is the most critical component of vicarious calibration using the reflectance-based method. In order to ensure the quality of these measurements, RSG has been exploring more efficient and accurate methods of on-site calibration evaluation. This work describes the design of, and initial results from, a small portable transfer radiometer for the purpose of GVR calibration validation on site. Prior to deployment, RSG uses high accuracy laboratory calibration methods in order to provide radiance calibrations with low uncertainties for each GVR. After deployment, a solar radiation based calibration has typically been used. The method is highly dependent on a clear, stable atmosphere, requires at least two people to perform, is time consuming in post processing, and is dependent on several large pieces of equipment. In order to provide more regular and more accurate calibration monitoring, the small portable transfer radiometer is designed for quick, one-person operation and on-site field calibration comparison results. The radiometer is also suited for laboratory calibration use and thus could be used as a transfer radiometer calibration standard for ground viewing radiometers of a RadCalNet site.

  13. Vicarious Radiometric Calibration of a Multispectral Camera on Board an Unmanned Aerial System

    Directory of Open Access Journals (Sweden)

    Susana Del Pozo

    2014-02-01

    Full Text Available Combinations of unmanned aerial platforms and multispectral sensors are considered low-cost tools for detailed spatial and temporal studies addressing spectral signatures, opening a broad range of applications in remote sensing. Thus, a key step in this process is knowledge of multi-spectral sensor calibration parameters in order to identify the physical variables collected by the sensor. This paper discusses the radiometric calibration process by means of a vicarious method applied to a high-spatial resolution unmanned flight using low-cost artificial and natural covers as control and check surfaces, respectively.

  14. Supervised Vicarious Calibration (SVC of Multi-Source Hyperspectral Remote-Sensing Data

    Directory of Open Access Journals (Sweden)

    Anna Brook

    2015-05-01

    Full Text Available Introduced in 2011, the supervised vicarious calibration (SVC approach is a promising approach to radiometric calibration and atmospheric correction of airborne hyperspectral (HRS data. This paper presents a comprehensive study by which the SVC method has been systematically examined and a complete protocol for its practical execution has been established—along with possible limitations encountered during the campaign. The technique was applied to multi-sourced HRS data in order to: (1 verify the at-sensor radiometric calibration and (2 obtain radiometric and atmospheric correction coefficients. Spanning two select study sites along the southeast coast of France, data were collected simultaneously by three airborne sensors (AisaDUAL, AHS and CASI-1500i aboard two aircrafts (CASA of National Institute for Aerospace Technology INTA ES and DORNIER 228 of NERC-ARSF Centre UK. The SVC ground calibration site was assembled along sand dunes near Montpellier and the thematic data were acquired from other areas in the south of France (Salon-de-Provence, Marseille, Avignon and Montpellier on 28 October 2010 between 12:00 and 16:00 UTC. The results of this study confirm that the SVC method enables reliable inspection and, if necessary, in-situ fine radiometric recalibration of airborne hyperspectral data. Independent of sensor or platform quality, the SVC approach allows users to improve at-sensor data to obtain more accurate physical units and subsequently improved reflectance information. Flight direction was found to be important, whereas the flight altitude posed very low impact. The numerous rules and major outcomes of this experiment enable a new standard of atmospherically corrected data based on better radiometric output. Future research should examine the potential of SVC to be applied to super-and-hyperspectral data obtained from on-orbit sensors.

  15. Absolute vicarious calibration of Landsat-8 OLI and Resourcesat-2 AWiFS sensors over Rann of Kutch site in Gujarat

    Science.gov (United States)

    Sharma, Shweta; Sridhar, V. N.; Prajapati, R. P.; Rao, K. M.; Mathur, A. K.

    2016-05-01

    In this work, vicarious calibration coefficients for all the four bands (green, red, NIR and SWIR) of Resourcesat-2 AWiFS sensor for four dates during Dec 2013-Nov 2014 and for seven bands (blue, green, red, NIR, SWIR1, SWIR2 and PAN) of OLI sensor onboard Landsat-8 for six dates during Dec 2013-Feb 2015 were estimated using field measured reflectance and measured atmospheric parameters during sensor image acquisition over Rann of Kutch site in Gujarat. The top of atmosphere (TOA) at-satellite radiances for all the bands were simulated using 6S radiative transfer code with field measured reflectance, synchronous atmospheric measurements and respective sensor's spectral response functions as an input. These predicted spectral radiances were compared with the radiances from the respective sensor's image in the respective band over the calibration site. Cross-calibration between the sensors AWiFS and OLI was also attempted using near-simultaneous same day image acquisition. Effect of spectral band adjustment factor was also studied with OLI sensor taken as reference sensor. Results show that the variation in average estimated radiance ratio for the AWiFS sensor was found to be within 10% for all the bands, whereas, for OLI sensor, the variation was found to be within 6% for all the bands except green and SWIR2 for which the variation was 8% and 11% respectively higher than the 5% uncertainty of the OLI sensor specification for TOA spectral radiance. At the 1σ level, red, NIR, SWIR1 and Panchromatic bands of OLI sensor showed close agreement between sensor-measured and vicarious TOA radiance resulting no change in calibration coefficient and hence indicating no sensor degradation. Two sets of near-simultaneous SBAFs were derived from respective ground measured target reflectance profiles and applied to the AWiFS and it was observed that overall, SBAF compensation provides a significant improvement in sensor agreement. The reduction in the difference between AWiFS and

  16. Geometric calibration of ERS satellite SAR images

    DEFF Research Database (Denmark)

    Mohr, Johan Jacob; Madsen, Søren Nørvang

    2001-01-01

    Geometric calibration of the European Remote Sensing (ERS) Satellite synthetic aperture radar (SAR) slant range images is important in relation to mapping areas without ground reference points and also in relation to automated processing. The relevant SAR system parameters are discussed...... on a seven-year ERS-1 and a four-year ERS-2 time series, the long term stability is found to be sufficient to allow a single calibration covering the entire mission period. A descending and an ascending orbit tandem pair of the ESA calibration site on Flevoland, suitable for calibration of ERS SAR processors...

  17. Satellite imager calibration and validation

    CSIR Research Space (South Africa)

    Vhengani, L

    2010-10-01

    Full Text Available The success or failure of any earth observation mission depends on the quality of its data. Data quality is assessed by determining the radiometric, spatial, spectral and geometric fidelity of the satellite sensor. The process is termed calval...

  18. Inter-Comparison of SMOS and Aquarius Sea Surface Salinity: Effects of the Dielectric Constant and Vicarious Calibration

    Science.gov (United States)

    Dinnat, Emmanuel P.; Boutin, Jacqueline; Yin, Xiaobin; Le Vine, David M.

    2014-01-01

    Two spaceborne instruments share the scientific objective of mapping the global Sea Surface Salinity (SSS). ESA's Soil Moisture and Ocean Salinity (SMOS) and NASA's Aquarius use L-band (1.4 GHz) radiometry to retrieve SSS. We find that SSS retrieved by SMOS is generally lower than SSS retrieved by Aquarius, except for very cold waters where SMOS SSS is higher overall. The spatial distribution of the differences in SSS is similar to the distribution of sea surface temperature. There are several differences in the retrieval algorithm that could explain the observed SSS differences. We assess the impact of the dielectric constant model and the ancillary sea surface salinity used by both missions for calibrating the radiometers and retrieving SSS. The differences in dielectric constant model produce differences in SSS of the order of 0.3 psu and exhibit a dependence on latitude and temperature. We use comparisons with the Argo in situ data to assess the performances of the model in various regions of the globe. Finally, the differences in the ancillary sea surface salinity products used to perform the vicarious calibration of both instruments are relatively small (0.1 psu), but not negligible considering the requirements for spaceborne remote sensing of SSS.

  19. Atmospheric Correction and Vicarious Calibration of Oceansat-1 Ocean Color Monitor (OCM Data in Coastal Case 2 Waters

    Directory of Open Access Journals (Sweden)

    Sherwin Ladner

    2012-06-01

    Full Text Available The Ocean Color Monitor (OCM provides radiance measurements in eight visible and near-infrared bands, similar to the Sea-viewing Wide Field-of-View Sensor (SeaWiFS but with higher spatial resolution. For small- to moderate-sized coastal lakes and estuaries, where the 1 × 1 km spatial resolution of SeaWiFS is inadequate, the OCM provides a good alternative because of its higher spatial resolution (240 × 360 m and an exact repeat coverage of every two days. This paper describes a detailed step-by-step atmospheric correction procedure for OCM data applicable to coastal Case 2 waters. This development was necessary as accurate results could not be obtained for our Case 2 water study area in coastal Louisiana with OCM data by using existing atmospheric correction software packages. In addition, since OCM-retrieved radiances were abnormally low in the blue wavelength region, a vicarious calibration procedure was developed. The results of our combined vicarious calibration and atmospheric correction procedure for OCM data were compared with the results from the SeaWiFS Data Analysis System (SeaDAS software package outputs for SeaWiFS and OCM data. For Case 1 waters, our results matched closely with SeaDAS results. For Case 2 waters, our results demonstrated closure with in situ radiometric measurements, while SeaDAS produced negative normalized water leaving radiance (nLw and remote sensing reflectance (Rrs. In summary, our procedure resulted in valid nLw and Rrs values for Case 2 waters using OCM data, providing a reliable method for retrieving useful nLw and Rrs values which can be used to develop ocean color algorithms for in-water substances (e.g., pigments, suspended sediments, chromophoric dissolved organic matter, etc. at relatively high spatial resolution in regions where

  20. Vicarious calibration campaign in Argentina for radiometric calibration of a multispectral imager onboard sumbandila satellite

    CSIR Research Space (South Africa)

    Griffith, DJ

    2011-07-01

    Full Text Available Espaciales (CONAE), Centro de Investigaciones ?pticas (CIOP), from Consejo Nacional deInvestigaciones Cient?ficas y T?cnicas (CONICET) and Comisi?n de Investigaciones Cient?ficas de la Provincia de Buenos Aires (CIC) Facultad de Ciencias Agrarias y... for SumbandilaSat. They thank also many people from the Comisi?n Nacional de Actividades Espaciales (CONAE), Centro de Investigaciones ?pticas (CIOP), from Consejo Nacional deInvestigaciones Cient?ficas y T?cnicas (CONICET) and Comisi?n de Investigaciones...

  1. Intercomparison of Approaches to the Empirical Line Method for Vicarious Hyperspectral Reflectance Calibration

    Directory of Open Access Journals (Sweden)

    Joseph D. Ortiz

    2017-09-01

    Full Text Available Analysis of visible remote sensing data research requires removing atmospheric effects by conversion from radiance to at-surface reflectance. This conversion can be achieved through theoretical radiative transfer models, which yield good results when well-constrained by field observations, although these measurements are often lacking. Additionally, radiative transfer models often perform poorly in marine or lacustrine settings or when complex air masses with variable aerosols are present. The empirical line method (ELM measures reference targets of known reflectance in the scene. ELM methods require minimal environmental observations and are conceptually simple. However, calibration coefficients are unique to the image containing the reflectance reference. Here we compare the conversion of hyperspectral radiance observations obtained with the NASA Glenn Research Center Hyperspectral Imager to at-surface reflectance factor using two reflectance reference targets. The first target employs spherical convex mirrors, deployed on the water surface to reflect ambient direct solar and hemispherical sky irradiance to the sensor. We calculate the mirror gain using near concurrent at-sensor reflectance, integrated mirror radiance, and in situ water reflectance. The second target is the Lambertian-like blacktop surface at Maumee Bay State Park, Oregon, OH, where reflectance was measured concurrently by a downward looking, spectroradiometer on the ground, the aerial hyperspectral imager and an upward looking spectroradiometer on the aircraft. These methods allows us to produce an independently calibrated at-surface water reflectance spectrum, when atmospheric conditions are consistent. We compare the mirror and blacktop-corrected spectra to the in situ water reflectance, and find good agreement between methods. The blacktop method can be applied to all scenes, while the mirror calibration method, based on direct observation of the light illuminating the

  2. On the Vicarious Calibration Methodologies in DIMITRI: Application on Sentinel-2 and Landsat-8 Products and Comparison with In-Situ Measurements

    Science.gov (United States)

    Alhammoud, Bahjat; Bouvet, Marc; Jackson, Jan; Arias, Manuel; Thepaut, Olivier; Lafrance, Bruno; Gascon, Ferran; Cadau, Enrico; Berthelot, Beatrice; Francesconi, Benjamin

    2016-08-01

    In the frame of the Sentinel-2 Mission Performance Centre (MPC) activities, in order to assess the S2A/MSI data quality and to monitor its evolution, DIMITRI is used to perform the vicarious validation of the Level-1C products. DIMITRI consists on several vicarious calibration methodologies for EO optical sensors: Rayleigh scattering, Sun-Glint, PICS and sensor-to- sensor inter-calibration.The first results of S2A/MSI from both Rayleigh and PICS methodologies are consistent and show an excellent quality of the L1C products. The cross- mission Intercomparison with LANDSAT-8/OLI over PICS shows good agreement within the ±5% mission requirements. The Intercomparison with concomitant ground-based TOA-reflectance over the Railroad Valley site shows a good agreement with a relative difference of 5%-10%. The uncertainties over the estimated calibration coefficients overall the results are found to be less than 5% for most of the S2A/MSI spectral bands.

  3. ECC Ozonesonde Calibration and Observations: Satellite Validation

    Science.gov (United States)

    Schmidlin, Francis J.; Zukor, Dorothy (Technical Monitor)

    2001-01-01

    The reliability of the Electrochemical Concentration Cell (ECC) ozonesonde depends on the care exercised in preparing the instrument for use. Although the ECC can be quickly prepared and flown, generally within less then one day if necessary, it is best to prepare the instrument at least one week prior to use, and as our tests have confirmed even 2-3 weeks prior to use may actually be better. There are a number of factors that must be considered when preparing an ECC. These basically are the pump efficiency, volumetric flow rate, temperature of the air entering the pump, and the background current. Also of importance is the concentration of the potassium iodide solution. Tests conducted at Wallops Island (38 N) has enabled us to identify potential problem areas and ways to avoid them. The calibration and pre-flight preparation methods will be discussed. The method of calibrating the ECC also is used at Ascension Island (8 S) and Natal, Brazil (5 S). Comparisons between vertical profiles of the ECC instrument and satellites will be reviewed as well as comparison with ground based instruments, such as, the Dobson Spectrophotometer and hand held Microtops photometers.

  4. Sensor Calibration in Support for NOAA's Satellite Mission

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Sensor calibration, including its definition, purpose, traceability options, methodology, complexity, and importance, is examined in this paper in the context of supporting NOAA's satellite mission. Common understanding of sensor calibration is essential for the effective communication among sensor vendors,calibration scientists, satellite operators, program managers, and remote sensing data users, who must cooperate to ensure that a nation's strategic investment in a sophisticated operational environmental satellite system serves the nation's interest and enhances the human lives around the world. Examples of calibration activities at NOAA/NESDIS/ORA are selected to further illustrate these concepts and to demonstrate the lessons learned from the past experience.

  5. Internal Calibration of HJ-1-C Satellite SAR System

    Directory of Open Access Journals (Sweden)

    Yang Zhen

    2014-06-01

    Full Text Available The HJ-1-C satellite is a Synthetic Aperture Radar (SAR satellite of a small constellation for environmental and disaster monitoring. At present, it is in orbit and working well. The SAR system uses a mesh reflector antenna and centralized power amplifier, and has an internal calibration function in orbit. This study introduces the internal calibration modes and signal paths. The design and realization of the internal calibrator are discussed in detail. Finally, the internal calibration data acquired in orbit are also analyzed.

  6. Geometric Calibration and Accuracy Verification of the GF-3 Satellite.

    Science.gov (United States)

    Zhao, Ruishan; Zhang, Guo; Deng, Mingjun; Xu, Kai; Guo, Fengcheng

    2017-08-29

    The GF-3 satellite is the first multi-polarization synthetic aperture radar (SAR) imaging satellite in China, which operates in the C band with a resolution of 1 m. Although the SAR satellite system was geometrically calibrated during the in-orbit commissioning phase, there are still some system errors that affect its geometric positioning accuracy. In this study, these errors are classified into three categories: fixed system error, time-varying system error, and random error. Using a multimode hybrid geometric calibration of spaceborne SAR, and considering the atmospheric propagation delay, all system errors can be effectively corrected through high-precision ground control points and global atmospheric reference data. The geometric calibration experiments and accuracy evaluation for the GF-3 satellite are performed using ground control data from several regions. The experimental results show that the residual system errors of the GF-3 SAR satellite have been effectively eliminated, and the geometric positioning accuracy can be better than 3 m.

  7. Normalization and calibration of geostationary satellite radiances for the International Satellite Cloud Climatology Project

    Science.gov (United States)

    Desormeaux, Yves; Rossow, William B.; Brest, Christopher L.; Campbell, G. G.

    1993-01-01

    Procedures are described for normalizing the radiometric calibration of image radiances obtained from geostationary weather satellites that contributed data to the International Satellite Cloud Climatology Project. The key step is comparison of coincident and collocated measurements made by each satellite and the concurrent AVHRR on the 'afternoon' NOAA polar-orbiting weather satellite at the same viewing geometry. The results of this comparison allow transfer of the AVHRR absolute calibration, which has been established over the whole series, to the radiometers on the geostationary satellites. Results are given for Meteosat-2, 3, and 4, for GOES-5, 6, and 7, for GMS-2, 3, and 4 and for Insat-1B. The relative stability of the calibrations of these radiance data is estimated to be within +/- 3 percent; the uncertainty of the absolute calibrations is estimated to be less than 10 percent. The remaining uncertainties are at least two times smaller than for the original radiance data.

  8. Cross calibration of IRS-P4 OCM satellite sensor

    Digital Repository Service at National Institute of Oceanography (India)

    Suresh, T.; Desa, E.; Mascarenhas, A.A.M.Q.; Matondkar, S.G.P.; Naik, P.; Nayak, S.R.

    The cross calibration of ocean color satellite sensor, IRS-P4 OCM using the radiative transfer code, with SeaWiFS as a reference are presented here. Since the bands of IRS-P4 OCM are identical to those of SeaWiFS and SeaWiFS has been continuously...

  9. Discussion of vicarious calibration of GOSAT/TANSO-CAI UV-band (380nm) and aerosol retrieval in wildfire region in the OCO-2 and GOSAT observation campaign at Railroad Valley in 2016

    Science.gov (United States)

    Hashimoto, M.; Kuze, A.; Bruegge, C. J.; Shiomi, K.; Kataoka, F.; Kikuchi, N.; Arai, T.; Kasai, K.; Nakajima, T.

    2016-12-01

    The GOSAT (Greenhouse Gases Observing Satellite) / TANSO-CAI (Cloud and Aerosol Imager, CAI) is an imaging sensor to measure cloud and aerosol properties and observes reflected sunlight from the atmosphere and surface of the ground. The sensor has four bands from near ultraviolet (near-UV) to shortwave infrared, 380, 674, 870 and 1600nm. The field of view size is 0.5 km for band-1 through band-3, and 1.5km for band-4. Band-1 (380nm) is one of unique function of the CAI. The near-UV observation offers several advantages for the remote sensing of aerosols over land: Low reflectance of most surfaces; Sensitivity to absorbing aerosols; Absorption of trace gases is weak (Höller et al., 2004). CAI UV-band is useful to distinguish absorbing aerosol (smoke) from cloud. GOSAT-2/TANSO-CAI-2 that will be launched in the future also has UV-bands, 340 and 380nm. We carried out an experiment to calibrate CAI UV-band radiance using data taken in a field campaign of OCO-2 and GOSAT at Railroad Valley in 2016. The campaign period is June 27 to July 3 in 2016. We measured surface reflectance by using USB4000 Spectrometer with 74-UV collimating lens (Ocean Optics) and Spectralon (Labsphere). USB4000 is a UV spectrometer, and its measurement range from 300 to 520nm. We simulated CAI UV-band radiance using a vector type of radiation transfer code, i.e. including polarization calculation, pstar3 (Ota et al., 2010) using measured surface reflectance and atmospheric data, pressure and relative humidity by radiosonde in the same campaign, and aerosol optical depth by AERONET, etc. Then, we evaluated measured UV radiances with the simulated data. We show the result of vicarious calibration of CAI UV-band in the campaign, and discuss about this method for future sensor, CAI-2. Around the campaign period, there was wildfire around Los Angeles, and aerosol optical thickness (AOT) observed by AERONET at Rail Road valley and Caltech sites is also high. We tried to detect and retrieve aerosol

  10. Sensitivity of Calibration Gains to Ocean Color Processing in Coastal and Open Waters Using Ensembles Members for NPP-VIIRS

    Science.gov (United States)

    2014-07-01

    DATE (DD-MM-YYYY) 31-07-2014 REPORT TYPE Conference Proceedine 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Sensitivity of Calibration...34The marine optical buoy (MOBY) radiometric calibration and uncertainty budget for ocean color satellite sensor vicarious calibration," Proc. SPIE

  11. Calibration of the spectrometer aboard the INTEGRAL satellite

    Science.gov (United States)

    Schanne, Stephane; Cordier, Bertrand; Gros, Maurice; Attie, David; von Ballmoos, Peter; Bouchet, Laurent; Carli, Raffaelo; Connell, Paul; Diehl, Roland; Jean, Pierre; Kiener, Juergen; von Kienlin, Andreas; Knoedlseder, Juergen; Laurent, Phillipe; Lichti, Giselher G.; Mandrou, Pierre; Paul, Jaques; Paul, Philippe; Roques, Jean-Pierre; Sanchez, Filomeno; Schoenfelder, Volker; Shrader, Chris; Skinner, Gerald K.; Strong, Andrew W.; Sturner, Steven J.; Tatischeff, Vincent; Teegarden, Bonnard J.; Vedrenne, Gilbert; Weidenspointner, Georg; Wunderer, Cornelia B.

    2003-03-01

    SPI, the Spectrometer on board the ESA INTEGRAL satellite, to be launched in October 2002, will study the gamma-ray sky in the 20 keV to 8 MeV energy band with a spectral resolution of 2 keV for photons of 1 MeV, thanks to its 19 germanium detectors spanning an active area of 500 cm2. A coded mask imaging technique provides a 2° angular resolution. The 16° field of view is defined by an active BGO veto shield, furthermore used for background rejection. In April 2001 the flight model of SPI underwent a one-month calibration campaign at CEA in Bruyères le Châtel using low intensity radioactive sources and the CEA accelerator for homogeneity measurements and high intensity radioactive sources for imaging performance measurements. After integration of all scientific payloads (the spectrometer SPI, the imager IBIS and the monitors JEM-X and OMC) on the INTEGRAL satellite, a cross-calibration campaign has been performed at the ESA center in Noordwijk. A set of sources has been placed in the field of view of the different instruments in order to compare their performances and determine their mutual influence. We report on the scientific goals of this calibration activity, and present the measurements performed as well as some preliminary results.

  12. Geodetic Mobil Solar Spectrometer for JASON Altimeter Satellite Calibration

    Science.gov (United States)

    Somieski, A.; Buerki, B.; Geiger, A.; Kahle, H.-G.; Becker-Ross, H.; Florek, S.; Okruss, M.

    Atmospheric water vapor is a crucial factor in achieving highest accuracies for space geodetic measurements. Water vapor causes a delay of the propagation time of the altimeter satellite signal, which propagates into errors for the determination of surface heights. Knowledge of the precipitable water vapor (PW) enables a tropospheric correction of the satellite signal. Therefore, different remote sensing techniques have been pursued to measure the PW continuously. The prototype Geodetic Mobil Solar Spectrometer (GEMOSS) was developed at the Geodesy and Geodynamics Laboratory (GGL, ETH Zurich) in cooperation with the Institute of Spectrochemistry and Applied Spectroscopy (ISAS) (Berlin, Germany). A new optical approach allows the simultaneous measurement of numerous single absorption lines of water vapor in the wide range between 728 nm and 915 nm. The large number of available absorption lines increases the accuracy of the absolute PW retrievals considerably. GEMOSS has been deployed during two campaigns in Greece in the framework of the EU-project GAVDOS, which deals with the calibration of the altimeter satellite JASON. During the overfly of JASON, the ground-based determination of PW enables the correction of the satellite measurements due to tropospheric water vapor. Comparisons with radiometer and radiosondes data allow to assess the accuracy and reliability of GEMOSS. The instrumental advancement of GEMOSS is presented together with the results of the campaigns carried out.

  13. Calibration of Ocean Forcing with satellite Flux Estimates (COFFEE)

    Science.gov (United States)

    Barron, Charlie; Jan, Dastugue; Jackie, May; Rowley, Clark; Smith, Scott; Spence, Peter; Gremes-Cordero, Silvia

    2016-04-01

    Predicting the evolution of ocean temperature in regional ocean models depends on estimates of surface heat fluxes and upper-ocean processes over the forecast period. Within the COFFEE project (Calibration of Ocean Forcing with satellite Flux Estimates, real-time satellite observations are used to estimate shortwave, longwave, sensible, and latent air-sea heat flux corrections to a background estimate from the prior day's regional or global model forecast. These satellite-corrected fluxes are used to prepare a corrected ocean hindcast and to estimate flux error covariances to project the heat flux corrections for a 3-5 day forecast. In this way, satellite remote sensing is applied to not only inform the initial ocean state but also to mitigate errors in surface heat flux and model representations affecting the distribution of heat in the upper ocean. While traditional assimilation of sea surface temperature (SST) observations re-centers ocean models at the start of each forecast cycle, COFFEE endeavors to appropriately partition and reduce among various surface heat flux and ocean dynamics sources. A suite of experiments in the southern California Current demonstrates a range of COFFEE capabilities, showing the impact on forecast error relative to a baseline three-dimensional variational (3DVAR) assimilation using operational global or regional atmospheric forcing. Experiment cases combine different levels of flux calibration with assimilation alternatives. The cases use the original fluxes, apply full satellite corrections during the forecast period, or extend hindcast corrections into the forecast period. Assimilation is either baseline 3DVAR or standard strong-constraint 4DVAR, with work proceeding to add a 4DVAR expanded to include a weak constraint treatment of the surface flux errors. Covariance of flux errors is estimated from the recent time series of forecast and calibrated flux terms. While the California Current examples are shown, the approach is

  14. Laser remote sensing calibration of ocean color satellite data

    Directory of Open Access Journals (Sweden)

    N. V. Kolodnikova

    2006-06-01

    Full Text Available world ocean: in fact, those processes dramatically affect the climatic equilibrium of our planet. For this reason, many advanced active and passive remote sensors have been used to study phytoplankton dynamics, since such phenomena are thought to be responsible for the sequestration of atmospheric carbon dioxide, one of the most important greenhouse gases. In this paper, one laser system and three satellite radiometers routinely used for the study of the phytoplankton dynamics will be briefly reviewed. Satellite sensors have been preferred to airborne sensors because, to our knowledge, ocean color airborne radiometers have not been operated in Antarctica, at least not throughout the whole lapse of time examined in this study. Particular focus was on the laser system (ELF and on a specific satellite radiometer (SeaWiFS. ELF is based on the laser-induced fluorescence of phytoplankton pigments and was conceived for the Italian expeditions to Antarctica. The goal of SeaWiFS is to provide the Earth science community with quantitative data on the global ocean bio-optical properties. Such satellite radiometer has been calibrated with in situ data mainly acquired in non polar regions. This is why a comparison between ELF and SeaWiFS measurements of chlorophyll-a surface concentrations in the Southern Ocean during the austral summer 1997-1998 was believed to be significant. Our results indicate that SeaWiFS overestimates high concentrations and underestimates low concentrations. In order to correct this behavior, the chlorophyll- a bio-optical algorithm of SeaWiFS has been recalibrated according to the measurements of ELF, thus providing a new estimation of the primary production in the Southern Ocean.

  15. Iqaluit Calibration/Validation Supersite for Meteorological Satellites

    Science.gov (United States)

    Mariani, Z.; Dehghan, A.; Gascon, G.; Joe, P.; Strawbridge, K.; Burrows, W.; Melo, S.

    2016-08-01

    It is foreseen that the changing climate in the Arctic will result in increased activities, such as marine navigation, resource exploitation, aviation, fishing, and recreation, requiring reliable and relevant weather information. However, processes governing weather systems in the Arctic are not well understood. There is a recognized lack of meteorological observations to characterize the atmosphere and the cryosphere for operational forecasting and to support process studies, satellite and model calibration/validation (cal/val), and for verification. Environment and Climate Change Canada (ECCC) is enhancing the observing capacity of selected sites, including Iqaluit (64oN, 69oW), which is uniquely situated in close proximity to frequent overpasses by polar-orbiting satellites such as ADM-Aeolus, A-Train, GPM, and EarthCARE. Iqaluit's suite of instruments will provide near-real time observations of altitude resolved wind speed and direction, aerosol size and shape, cloud intensity and height, sensible heat flux, turbulence, fog, and precipitation amount/type. Initial results demonstrate their ability to detect fog, blowing snow and very light precipitation (diamond dust).

  16. Tectonic calibrations in molecular dating

    Institute of Scientific and Technical Information of China (English)

    Ullasa KODANDARAMAIAH

    2011-01-01

    Molecular dating techniques require the use of calibrations, which are usually fossil or geological vicariance-based.Fossil calibrations have been criticised because they result only in minimum age estimates. Based on a historical biogeographic perspective, Ⅰ suggest that vicariance-based calibrations are more dangerous. Almost all analytical methods in historical biogeography are strongly biased towards inferring vicariance, hence vicariance identified through such methods is unreliable. Other studies, especially of groups found on Gondwanan fragments, have simply assumed vicariance. Although it was previously believed that vicariance was the predominant mode of speciation, mounting evidence now indicates that speciation by dispersal is common, dominating vicariance in several groups. Moreover, the possibility of speciation having occurred before the said geological event cannot be precluded. Thus, geological calibrations can under- or overestimate times, whereas fossil calibrations always result in minimum estimates. Another major drawback of vicariant calibrations is the problem of circular reasoning when the resulting estimates are used to infer ages of biogeographic events. Ⅰ argue that fossil-based dating is a superior alternative to vicariance, primarily because the strongest assumption in the latter, that speciation was caused by the said geological process, is more often than not the most tenuous. When authors prefer to use a combination of fossil and vicariant calibrations, one suggestion is to report results both with and without inclusion of the geological constraints. Relying solely on vicariant calibrations should be strictly avoided.

  17. Inter-Satellite Comparison and Evaluation of Navy SNPP-VIIRS and MODIS-Aqua Ocean Color Properties

    Science.gov (United States)

    2014-07-01

    DATE (DD-MM-YYYYJ 31-07-2014 REPORT TYPE Conference Proceeding 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Inter-Satellite Comparison...ocean color retrievals^’ "■. MODIS has reached its end-of-life expectancy and VIIRS continues to have issues with degradation in radiometric calibration...Clark, D., "The marine optical buoy (MOBY) radiometric calibration and uncertainty budget for ocean color satellite sensor vicarious calibration

  18. Can satellite-derived water surface changes be used to calibrate a hydrodynamic model?

    Science.gov (United States)

    Revilla-Romero, Beatriz; Beck, Hylke; Salamon, Peter; Burek, Peter; de Roo, Ad; Thielen, Jutta

    2015-04-01

    The limited availability of recent ground observational data is one of the main challenges for validation of hydrodynamic models. This is especially relevant for real-time global applications such as flood forecasting models. In this study, we aim to use remotely-sensed data from the Global Flood Detection System (GFDS) as a proxy of river discharge time series and test its value through calibration of the hydrological model LISFLOOD. This was carried out for the time period 1998-2010 at 40 sites in Africa, Europe, North America and South America by calibrating the parameters that control the flow routing and groundwater processes. We compared the performance of the calibrated simulated discharge time series that used satellite-derived data with the ground discharge time series. Furthermore, we compared it with the independent calibrated run that used ground data and also, to the non-calibrated simulated discharge time series. The non-calibrated set up used a set of parameters which values were predefined by expert-knowledge. This is currently being used by the LISFLOOD set up model embedded in the pre-operational Global Flood Awareness System (GloFAS). The results of this study showed that the satellite surface water changes from the Global Flood Detection System can be used as a proxy of river discharge data, through the demonstration of its added value for model calibration and validation. Using satellite-derived data, the skill scores obtained by the calibrated simulated model discharge improved when comparing to non-calibrated simulated time series. Calibration, post-processing and data assimilation strategies of satellite data as a proxy for streamflow data within the global hydrological model are outlined and discussed.

  19. Satellite-Mounted Light Sources as Photometric Calibration Standards

    CERN Document Server

    Albert, Justin; Battat, James; Dupuis, Grace; Fransham, Kyle; Koopmans, Kristin; Jarrett, Michael

    2009-01-01

    A significant and growing portion of systematic error on a number of fundamental parameters in astrophysics and cosmology is due to uncertainties from absolute photometric and flux standards. A path toward achieving major reduction in such uncertainties may be provided by satellite-mounted light sources, resulting in improvement in the ability to precisely characterize atmospheric extinction, and thus helping to usher in the coming generation of precision results in astronomy. Toward this end, we have performed a campaign of observations of the 532 nm pulsed laser aboard the CALIPSO satellite, using a portable network of cameras and photodiodes, to precisely measure atmospheric extinction.

  20. Calibration of the Microwave Limb Sounder on the Upper Atmosphere Research Satellite

    Science.gov (United States)

    Jarnot, R. F.; Cofield, R. E.; Waters, J. W.; Flower, D. A.; Peckham, G. E.

    1996-01-01

    The Microwave Limb Sounder (MLS) is a three-radiometer, passive, limb emission instrument onboard the Upper Atmosphere Research Satellite (UARS). Radiometric, spectral and field-of-view calibrations of the MLS instrument are described in this paper. In-orbit noise performance, gain stability, spectral baseline and dynamic range are described, as well as use of in-flight data for validation and refinement of prelaunch calibrations. Estimated systematic scaling uncertainties (3 sigma) on calibrated limb radiances from prelaunch calibrations are 2.6% in bands 1 through 3, 3.4% in band 4, and 6% in band 5. The observed systematic errors in band 6 are about 15%, consistent with prelaunch calibration uncertainties. Random uncertainties on individual limb radiance measurements are very close to the levels predicted from measured radiometer noise temperature, with negligible contribution from noise and drifts on the regular in-flight gain calibration measurements.

  1. On-orbit calibration of soft X-ray detector on Chang'E-2 satellite

    Science.gov (United States)

    Xiao, Hong; Peng, Wen-Xi; Wang, Huan-Yu; Cui, Xing-Zhu; Guo, Dong-Ya

    2015-10-01

    The X-ray spectrometer is one of the satellite payloads on the Chang'E-2 satellite. The soft X-ray detector is one of the devices on the X-ray spectrometer, designed to detect the major rock-forming elements within the 0.5-10 keV range on the lunar surface. In this paper, energy linearity and energy resolution calibration is done using a weak 55Fe source. Temperature and time effects are found not to give a large error. The total uncertainty of calibration is estimated to be within 5% after correction. Supported by National Science Foundation of Ministry of Education

  2. A multi-source satellite data approach for modelling Lake Turkana water level: Calibration and validation using satellite altimetry data

    Science.gov (United States)

    Velpuri, N.M.; Senay, G.B.; Asante, K.O.

    2012-01-01

    Lake Turkana is one of the largest desert lakes in the world and is characterized by high degrees of interand intra-annual fluctuations. The hydrology and water balance of this lake have not been well understood due to its remote location and unavailability of reliable ground truth datasets. Managing surface water resources is a great challenge in areas where in-situ data are either limited or unavailable. In this study, multi-source satellite-driven data such as satellite-based rainfall estimates, modelled runoff, evapotranspiration, and a digital elevation dataset were used to model Lake Turkana water levels from 1998 to 2009. Due to the unavailability of reliable lake level data, an approach is presented to calibrate and validate the water balance model of Lake Turkana using a composite lake level product of TOPEX/Poseidon, Jason-1, and ENVISAT satellite altimetry data. Model validation results showed that the satellitedriven water balance model can satisfactorily capture the patterns and seasonal variations of the Lake Turkana water level fluctuations with a Pearson's correlation coefficient of 0.90 and a Nash-Sutcliffe Coefficient of Efficiency (NSCE) of 0.80 during the validation period (2004-2009). Model error estimates were within 10% of the natural variability of the lake. Our analysis indicated that fluctuations in Lake Turkana water levels are mainly driven by lake inflows and over-the-lake evaporation. Over-the-lake rainfall contributes only up to 30% of lake evaporative demand. During the modelling time period, Lake Turkana showed seasonal variations of 1-2m. The lake level fluctuated in the range up to 4m between the years 1998-2009. This study demonstrated the usefulness of satellite altimetry data to calibrate and validate the satellite-driven hydrological model for Lake Turkana without using any in-situ data. Furthermore, for Lake Turkana, we identified and outlined opportunities and challenges of using a calibrated satellite-driven water balance

  3. [In-Flight Radiometric Calibration for ZY-3 Satellite Multispectral Sensor by Modified Reflectance-Based Method].

    Science.gov (United States)

    Han, Jie; Xie, Yong; Gu, Xing-fa; Yu, Tao; Liu, Qi-yue; Gao, Rong-jun

    2015-03-01

    Through integrating multi-spectral sensor characteristics of ZY-3 satellite, a modified reflectance-based method is proposed and used to achieve ZY-3 satellite multispectral sensor in-flight radiometric calibration. This method chooses level 1A image as data source and establishes geometric model to get an accurate observation geometric parameters at calibration site according to the information provided in image auxiliary documentation, which can reduce the influences on the calibration accuracy from image resampling and observation geometry errors. We use two-point and multi-points methods to calculate the absolute radiometric calibration coefficients of ZY-3 satellite multispectral sensor based on the large campaign at Dongying city, Shan Dong province. Compared with ZY-3 official calibration coefficients, multi-points method has higher accuracy than two-point method. Through analyzing the dispersion between each calibration point and the fitting line, we find that the residual error of water calibration site is larger than others, which of green band is approximately 67.39%. Treating water calibration site as an error, we filter it out using 95.4% confidence level as standard and recalculate the calibration coefficients with multi-points method. The final calibration coefficients show that the relative differences of the first three bands are less than 2% and the last band is less than 5%, which manifests that the proposed radiometric calibration method can obtain accurate and reliable calibration coefficients and is useful for other similar satellites in future.

  4. Bathymetry Estimations Using Vicariously Calibrated HICO Data

    Science.gov (United States)

    2013-07-16

    wavelength. However, the accuracy of the measurement at the ends of this range is affected by the decreasing quantum efficiency of the sensing elements at...situ data set to explore the ability to refine HICO data measurement. Ocean Sensing and Monitoring V, edited by Weilin W. Hou, Robert A. Arnone... friendly bathymetry for those estuaries that contained more than 80% spatial coverage of digital sounding data. Bathymetry for St. Andrew Bay was

  5. A calibrated, high-resolution goes satellite solar insolation product for a climatology of Florida evapotranspiration

    Science.gov (United States)

    Paech, S.J.; Mecikalski, J.R.; Sumner, D.M.; Pathak, C.S.; Wu, Q.; Islam, S.; Sangoyomi, T.

    2009-01-01

    Estimates of incoming solar radiation (insolation) from Geostationary Operational Environmental Satellite observations have been produced for the state of Florida over a 10-year period (1995-2004). These insolation estimates were developed into well-calibrated half-hourly and daily integrated solar insolation fields over the state at 2 km resolution, in addition to a 2-week running minimum surface albedo product. Model results of the daily integrated insolation were compared with ground-based pyranometers, and as a result, the entire dataset was calibrated. This calibration was accomplished through a three-step process: (1) comparison with ground-based pyranometer measurements on clear (noncloudy) reference days, (2) correcting for a bias related to cloudiness, and (3) deriving a monthly bias correction factor. Precalibration results indicated good model performance, with a station-averaged model error of 2.2 MJ m-2/day (13%). Calibration reduced errors to 1.7 MJ m -2/day (10%), and also removed temporal-related, seasonal-related, and satellite sensor-related biases. The calibrated insolation dataset will subsequently be used by state of Florida Water Management Districts to produce statewide, 2-km resolution maps of estimated daily reference and potential evapotranspiration for water management-related activities. ?? 2009 American Water Resources Association.

  6. An Overview of the Joint Polar Satellite System (JPSS Science Data Product Calibration and Validation

    Directory of Open Access Journals (Sweden)

    Lihang Zhou

    2016-02-01

    Full Text Available The Joint Polar Satellite System (JPSS will launch its first JPSS-1 satellite in early 2017. The JPSS-1 and follow-on satellites will carry aboard an array of instruments including the Visible Infrared Imaging Radiometer Suite (VIIRS, the Cross-track Infrared Sounder (CrIS, the Advanced Technology Microwave Sounder (ATMS, and the Ozone Mapping and Profiler Suite (OMPS. These instruments are similar to the instruments currently operating on the Suomi National Polar-orbiting Partnership (S-NPP satellite. In preparation for the JPSS-1 launch, the JPSS program at the Center for Satellite Applications and Research (JSTAR Calibration/Validation (Cal/Val teams, have laid out the Cal/Val plans to oversee JPSS-1 science products’ algorithm development efforts, verification and characterization of these algorithms during the pre-launch period, calibration and validation of the products during post-launch, and long-term science maintenance (LTSM. In addition, the team has developed the necessary schedules, deliverables and infrastructure for routing JPSS-1 science product algorithms for operational implementation. This paper presents an overview of these efforts. In addition, this paper will provide insight into the processes of both adapting S-NPP science products for JPSS-1 and performing upgrades for enterprise solutions, and will discuss Cal/Val processes and quality assurance procedures.

  7. On-orbit calibration of soft X-ray detector on Chang'E-2 satellite

    CERN Document Server

    Xiao, Hong; Wang, Huanyu; Cui, Xingzhu; Guo, Dongya

    2015-01-01

    X-ray spectrometer is one of the satellite payloads on Chang'E-2 satellite. The soft X-ray detector is one of the device on X-ray spectrometer which is designed to detect the major rock-forming elements within 0.5-10keV range on lunar surface. In this paper, energy linearity and energy resolution calibration is done using a weak Fe55 source, while temperature and time effect is considered not take big error. The total uncertainty is estimated to be within 5% after correction.

  8. Suborbital Reusable Launch Vehicles as an Opportunity to Consolidate and Calibrate Ground Based and Satellite Instruments

    Science.gov (United States)

    Papadopoulos, K.

    2014-12-01

    XCOR Aerospace, a commercial space company, is planning to provide frequent, low cost access to near-Earth space on the Lynx suborbital Reusable Launch Vehicle (sRLV). Measurements in the external vacuum environment can be made and can launch from most runways on a limited lead time. Lynx can operate as a platform to perform suborbital in situ measurements and remote sensing to supplement models and simulations with new data points. These measurements can serve as a quantitative link to existing instruments and be used as a basis to calibrate detectors on spacecraft. Easier access to suborbital data can improve the longevity and cohesiveness of spacecraft and ground-based resources. A study of how these measurements can be made on Lynx sRLV will be presented. At the boundary between terrestrial and space weather, measurements from instruments on Lynx can help develop algorithms to optimize the consolidation of ground and satellite based data as well as assimilate global models with new data points. For example, current tides and the equatorial electrojet, essential to understanding the Thermosphere-Ionosphere system, can be measured in situ frequently and on short notice. Furthermore, a negative-ion spectrometer and a Faraday cup, can take measurements of the D-region ion composition. A differential GPS receiver can infer the spatial gradient of ionospheric electron density. Instruments and optics on spacecraft degrade over time, leading to calibration drift. Lynx can be a cost effective platform for deploying a reference instrument to calibrate satellites with a frequent and fast turnaround and a successful return of the instrument. A calibrated reference instrument on Lynx can make collocated observations as another instrument and corrections are made for the latter, thus ensuring data consistency and mission longevity. Aboard a sRLV, atmospheric conditions that distort remotely sensed data (ground and spacecraft based) can be measured in situ. Moreover, an

  9. Comparisons of aerosol backscatter using satellite and ground lidars: implications for calibrating and validating spaceborne lidar

    Science.gov (United States)

    Gimmestad, Gary; Forrister, Haviland; Grigas, Tomas; O’Dowd, Colin

    2017-01-01

    The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument on the polar orbiter Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) is an elastic backscatter lidar that produces a global uniformly-calibrated aerosol data set. Several Calibration/Validation (Cal/Val) studies for CALIOP conducted with ground-based lidars and CALIOP data showed large aerosol profile disagreements, both random and systematic. In an attempt to better understand these problems, we undertook a series of ground-based lidar measurements in Atlanta, Georgia, which did not provide better agreement with CALIOP data than the earlier efforts, but rather prompted us to investigate the statistical limitations of such comparisons. Meaningful Cal/Val requires intercomparison data sets with small enough uncertainties to provide a check on the maximum expected calibration error. For CALIOP total attenuated backscatter, reducing the noise to the required level requires averaging profiles along the ground track for distances of at least 1,500 km. Representative comparison profiles often cannot be acquired with ground-based lidars because spatial aerosol inhomogeneities introduce systematic error into the averages. These conclusions have implications for future satellite lidar Cal/Val efforts, because planned satellite lidars measuring aerosol backscatter, wind vector, and CO2 concentration profiles may all produce data requiring considerable along-track averaging for meaningful Cal/Val. PMID:28198389

  10. Comparisons of aerosol backscatter using satellite and ground lidars: implications for calibrating and validating spaceborne lidar

    Science.gov (United States)

    Gimmestad, Gary; Forrister, Haviland; Grigas, Tomas; O’Dowd, Colin

    2017-02-01

    The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument on the polar orbiter Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) is an elastic backscatter lidar that produces a global uniformly-calibrated aerosol data set. Several Calibration/Validation (Cal/Val) studies for CALIOP conducted with ground-based lidars and CALIOP data showed large aerosol profile disagreements, both random and systematic. In an attempt to better understand these problems, we undertook a series of ground-based lidar measurements in Atlanta, Georgia, which did not provide better agreement with CALIOP data than the earlier efforts, but rather prompted us to investigate the statistical limitations of such comparisons. Meaningful Cal/Val requires intercomparison data sets with small enough uncertainties to provide a check on the maximum expected calibration error. For CALIOP total attenuated backscatter, reducing the noise to the required level requires averaging profiles along the ground track for distances of at least 1,500 km. Representative comparison profiles often cannot be acquired with ground-based lidars because spatial aerosol inhomogeneities introduce systematic error into the averages. These conclusions have implications for future satellite lidar Cal/Val efforts, because planned satellite lidars measuring aerosol backscatter, wind vector, and CO2 concentration profiles may all produce data requiring considerable along-track averaging for meaningful Cal/Val.

  11. Comparisons of aerosol backscatter using satellite and ground lidars: implications for calibrating and validating spaceborne lidar.

    Science.gov (United States)

    Gimmestad, Gary; Forrister, Haviland; Grigas, Tomas; O'Dowd, Colin

    2017-02-15

    The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument on the polar orbiter Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) is an elastic backscatter lidar that produces a global uniformly-calibrated aerosol data set. Several Calibration/Validation (Cal/Val) studies for CALIOP conducted with ground-based lidars and CALIOP data showed large aerosol profile disagreements, both random and systematic. In an attempt to better understand these problems, we undertook a series of ground-based lidar measurements in Atlanta, Georgia, which did not provide better agreement with CALIOP data than the earlier efforts, but rather prompted us to investigate the statistical limitations of such comparisons. Meaningful Cal/Val requires intercomparison data sets with small enough uncertainties to provide a check on the maximum expected calibration error. For CALIOP total attenuated backscatter, reducing the noise to the required level requires averaging profiles along the ground track for distances of at least 1,500 km. Representative comparison profiles often cannot be acquired with ground-based lidars because spatial aerosol inhomogeneities introduce systematic error into the averages. These conclusions have implications for future satellite lidar Cal/Val efforts, because planned satellite lidars measuring aerosol backscatter, wind vector, and CO2 concentration profiles may all produce data requiring considerable along-track averaging for meaningful Cal/Val.

  12. Calibration of Numerical Model for Shoreline Change Prediction Using Satellite Imagery Data

    Directory of Open Access Journals (Sweden)

    Sigit Sutikno

    2015-12-01

    Full Text Available This paper presents a method for calibration of numerical model for shoreline change prediction using satellite imagery data in muddy beach. Tanjung Motong beach, a muddy beach that is suffered high abrasion in Rangsang Island, Riau province, Indonesia was picked as study area. The primary numerical modeling tool used in this research was GENESIS (GENEralized Model for Simulating Shoreline change, which has been successfully applied in many case studies of shoreline change phenomena on a sandy beach.The model was calibrated using two extracted coastlines satellite imagery data, such as Landsat-5 TM and Landsat-8 OLI/TIRS. The extracted coastline data were analyzed by using DSAS (Digital Shoreline Analysis System tool to get the rate of shoreline change from 1990 to 2014. The main purpose of the calibration process was to find out the appropriate value for K 1 and K coefficients so that the predicted shoreline change had an acceptable correlation with the output of the satellite data processing. The result of this research showed that the shoreline change prediction had a good correlation with the historical evidence data in Tanjung Motong coast. It means that the GENESIS tool is not only applicable for shoreline prediction in sandy beach but also in muddy beach.

  13. Comparison of Two Methodologies for Calibrating Satellite Instruments in the Visible and Near-Infrared

    Science.gov (United States)

    Barnes, Robert A.; Brown, Steven W.; Lykke, Keith R.; Guenther, Bruce; Butler, James J.; Schwarting, Thomas; Turpie, Kevin; Moyer, David; DeLuccia, Frank; Moeller, Christopher

    2015-01-01

    Traditionally, satellite instruments that measure Earth-reflected solar radiation in the visible and near infrared wavelength regions have been calibrated for radiance responsivity in a two-step method. In the first step, the relative spectral response (RSR) of the instrument is determined using a nearly monochromatic light source such as a lamp-illuminated monochromator. These sources do not typically fill the field-of-view of the instrument nor act as calibrated sources of light. Consequently, they only provide a relative (not absolute) spectral response for the instrument. In the second step, the instrument views a calibrated source of broadband light, such as a lamp-illuminated integrating sphere. The RSR and the sphere absolute spectral radiance are combined to determine the absolute spectral radiance responsivity (ASR) of the instrument. More recently, a full-aperture absolute calibration approach using widely tunable monochromatic lasers has been developed. Using these sources, the ASR of an instrument can be determined in a single step on a wavelength-by-wavelength basis. From these monochromatic ASRs, the responses of the instrument bands to broadband radiance sources can be calculated directly, eliminating the need for calibrated broadband light sources such as lamp-illuminated integrating spheres. In this work, the traditional broadband source-based calibration of the Suomi National Preparatory Project (SNPP) Visible Infrared Imaging Radiometer Suite (VIIRS) sensor is compared with the laser-based calibration of the sensor. Finally, the impact of the new full-aperture laser-based calibration approach on the on-orbit performance of the sensor is considered.

  14. Fifteen Years of Synthetic Aperture Radar Calibration Using Trihedral Reflectors at the Alaska Satellite Facility

    Science.gov (United States)

    Albright, W.; Atwood, D.; Lawlor, O. S.; Utley, P.; Slater, C.

    2006-12-01

    For the past 15 years, the Alaska Satellite Facility (ASF) has provided calibration support for singly polarized SAR datasets in C-band (ERS-1, ERS-2, and RADARSAT-1 and L-Band (JERS-1. Passive point targets like trihedral corner reflectors offer a reliable and well established means to perform radiometric, geometric, and impulse response measurements for SAR calibration. Routine support of an array of corner reflectors in interior Alaska has permitted ASF an opportunity to monitor satellite health, calibrate SAR processors, and experiment with new reflector designs. Corner reflectors offer the advantages of low maintenance and low cost compared to active devices such as transponders. In order to maintain radar cross section, as the microwave wavelength get longer, so too does the size of the reflector. Increased size means decreased portability, exacerbating the difficulty of providing calibration support in remote locations. In response, ASF is developing low cost, light weight corner reflectors that can be deployed with minimal effort and no maintenance. These efforts will help to extend our present calibration efforts to more remote locations. But more importantly, these designs are expected to play an important role in Permanent Scatterer InSAR (PS-InSAR) methodology. The use of corner reflector arrays in support PS-InSAR may provide new means for monitoring terrain displacements in regions of heavy vegetation. This paper presents some long term measurements from ASF's array of corner reflectors, outlines improvements performed on trihedral corner reflectors, and describes current efforts at ASF to support the next generation of SAR missions and techniques.

  15. Imager-to-radiometer inflight cross calibration: RSP radiometric comparison with airborne and satellite sensors

    Directory of Open Access Journals (Sweden)

    J. McCorkel

    2015-10-01

    Full Text Available This work develops a method to compare the radiometric calibration between a radiometer and imagers hosted on aircraft and satellites. The radiometer is the airborne Research Scanning Polarimeter (RSP that takes multi-angle, photo-polarimetric measurements in several spectral channels. The RSP measurements used in this work were coincident with measurements made by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS, which was on the same aircraft. These airborne measurements were also coincident with an overpass of the Landsat 8 Operational Land Imager (OLI. First we compare the RSP and OLI radiance measurements to AVIRIS since the spectral response of the multispectral instruments can be used to synthesize a spectrally equivalent signal from the imaging spectrometer data. We then explore a method that uses AVIRIS as a transfer between RSP and OLI to show that radiometric traceability of a satellite-based imager can be used to calibrate a radiometer despite differences in spectral channel sensitivities. This calibration transfer shows agreement within the uncertainty of both the various instruments for most spectral channels.

  16. Post launch calibration and testing of the Advanced Baseline Imager on the GOES-R satellite

    Science.gov (United States)

    Lebair, William; Rollins, C.; Kline, John; Todirita, M.; Kronenwetter, J.

    2016-05-01

    The Geostationary Operational Environmental Satellite R (GOES-R) series is the planned next generation of operational weather satellites for the United State's National Oceanic and Atmospheric Administration. The first launch of the GOES-R series is planned for October 2016. The GOES-R series satellites and instruments are being developed by the National Aeronautics and Space Administration (NASA). One of the key instruments on the GOES-R series is the Advance Baseline Imager (ABI). The ABI is a multi-channel, visible through infrared, passive imaging radiometer. The ABI will provide moderate spatial and spectral resolution at high temporal and radiometric resolution to accurately monitor rapidly changing weather. Initial on-orbit calibration and performance characterization is crucial to establishing baseline used to maintain performance throughout mission life. A series of tests has been planned to establish the post launch performance and establish the parameters needed to process the data in the Ground Processing Algorithm. The large number of detectors for each channel required to provide the needed temporal coverage presents unique challenges for accurately calibrating ABI and minimizing striping. This paper discusses the planned tests to be performed on ABI over the six-month Post Launch Test period and the expected performance as it relates to ground tests.

  17. Telescope Spectrophotometric and Absolute Flux Calibration, and National Security Applications, Using a Tunable Laser on a Satellite

    CERN Document Server

    Albert, J; Rhodes, J; Albert, Justin; Burgett, William; Rhodes, Jason

    2006-01-01

    We propose a tunable laser-based satellite-mounted spectrophotometric and absolute flux calibration system, to be utilized by ground- and space-based telescopes. As uncertainties on the photometry, due to imperfect knowledge of both telescope optics and the atmosphere, will in the near future begin to dominate the uncertainties on fundamental cosmological parameters such as Omega_Lambda and w in measurements from SNIa, weak gravitational lensing, and baryon oscillations, a method for reducing such uncertainties is needed. We propose to improve spectrophotometric calibration, currently obtained using standard stars, by placing a tunable laser and a wide-angle light source on a satellite by early next decade (perhaps included in the upgrade to the GPS satellite network) to improve absolute flux calibration to 0.1% and relative spectrophotometric calibration to better than 0.001% across the visible and near-infrared spectrum. As well as fundamental astrophysical applications, the system proposed here potentially...

  18. Post-Launch Calibration and Testing of Space Weather Instruments on GOES-R Satellite

    Science.gov (United States)

    Tadikonda, Sivakumara S. K.; Merrow, Cynthia S.; Kronenwetter, Jeffrey A.; Comeyne, Gustave J.; Flanagan, Daniel G.; Todirita, Monica

    2016-01-01

    The Geostationary Operational Environmental Satellite - R (GOES-R) is the first of a series of satellites to be launched, with the first launch scheduled for October 2016. The three instruments - Solar Ultra Violet Imager (SUVI), Extreme ultraviolet and X-ray Irradiance Sensor (EXIS), and Space Environment In-Situ Suite (SEISS) provide the data needed as inputs for the product updates National Oceanic and Atmospheric Administration (NOAA) provides to the public. SUVI is a full-disk extreme ultraviolet imager enabling Active Region characterization, filament eruption, and flare detection. EXIS provides inputs to solar backgrounds/events impacting climate models. SEISS provides particle measurements over a wide energy-and-flux range that varies by several orders of magnitude and these data enable updates to spacecraft charge models for electrostatic discharge. EXIS and SEISS have been tested and calibrated end-to-end in ground test facilities around the United States. Due to the complexity of the SUVI design, data from component tests were used in a model to predict on-orbit performance. The ground tests and model updates provided inputs for designing the on-orbit calibration tests. A series of such tests have been planned for the Post-Launch Testing (PLT) of each of these instruments, and specific parameters have been identified that will be updated in the Ground Processing Algorithms, on-orbit parameter tables, or both. Some of SUVI and EXIS calibrations require slewing them off the Sun, while no such maneuvers are needed for SEISS. After a six-month PLT period the GOES-R is expected to be operational. The calibration details are presented in this paper.

  19. Post-Launch Calibration and Testing of Space Weather Instruments on GOES-R Satellite

    Science.gov (United States)

    Tadikonda, S. K.; Merrow, Cynthia S.; Kronenwetter, Jeffrey A.; Comeyne, Gustave J.; Flanagan, Daniel G.; Todrita, Monica

    2016-01-01

    The Geostationary Operational Environmental Satellite - R (GOES-R) is the first of a series of satellites to be launched, with the first launch scheduled for October 2016. The three instruments Solar UltraViolet Imager (SUVI), Extreme ultraviolet and X-ray Irradiance Sensor (EXIS), and Space Environment In-Situ Suite (SEISS) provide the data needed as inputs for the product updates National Oceanic and Atmospheric Administration (NOAA) provides to the public. SUVI is a full-disk extreme ultraviolet imager enabling Active Region characterization, filament eruption, and flare detection. EXIS provides inputs to solar back-ground-sevents impacting climate models. SEISS provides particle measurements over a wide energy-and-flux range that varies by several orders of magnitude and these data enable updates to spacecraft charge models for electrostatic discharge. EXIS and SEISS have been tested and calibrated end-to-end in ground test facilities around the United States. Due to the complexity of the SUVI design, data from component tests were used in a model to predict on-orbit performance. The ground tests and model updates provided inputs for designing the on-orbit calibration tests. A series of such tests have been planned for the Post-Launch Testing (PLT) of each of these instruments, and specific parameters have been identified that will be updated in the Ground Processing Algorithms, on-orbit parameter tables, or both. Some of SUVI and EXIS calibrations require slewing them off the Sun, while no such maneuvers are needed for SEISS. After a six-month PLT period the GOES-R is expected to be operational. The calibration details are presented in this paper.

  20. Post-launch calibration and testing of space weather instruments on GOES-R satellite

    Science.gov (United States)

    Tadikonda, Sivakumara S. K.; Merrow, Cynthia S.; Kronenwetter, Jeffrey A.; Comeyne, Gustave J.; Flanagan, Daniel G.; Todirita, Monica

    2016-05-01

    The Geostationary Operational Environmental Satellite - R (GOES-R) is the first of a series of satellites to be launched, with the first launch scheduled for October 2016. The three instruments -- Solar UltraViolet Imager (SUVI), Extreme ultraviolet and X-ray Irradiance Sensor (EXIS), and Space Environment In-Situ Suite (SEISS) provide the data needed as inputs for the product updates National Oceanic and Atmospheric Administration (NOAA) provides to the public. SUVI is a full-disk extreme ultraviolet imager enabling Active Region characterization, filament eruption, and flare detection. EXIS provides inputs to solar backgrounds/events impacting climate models. SEISS provides particle measurements over a wide energy-and-flux range that varies by several orders of magnitude and these data enable updates to spacecraft charge models for electrostatic discharge. EXIS and SEISS have been tested and calibrated end-to-end in ground test facilities around the United States. Due to the complexity of the SUVI design, data from component tests were used in a model to predict on-orbit performance. The ground tests and model updates provided inputs for designing the on-orbit calibration tests. A series of such tests have been planned for the Post-Launch Testing (PLT) of each of these instruments, and specific parameters have been identified that will be updated in the Ground Processing Algorithms, on-orbit parameter tables, or both. Some of SUVI and EXIS calibrations require slewing them off the Sun, while no such maneuvers are needed for SEISS. After a six-month PLT period the GOES-R is expected to be operational. The calibration details are presented in this paper.

  1. Calibration of the Distributed Hydrological Model mHM using Satellite derived Land Surface Temperature

    Science.gov (United States)

    Zink, M.; Samaniego, L. E.; Cuntz, M.

    2012-12-01

    A combined investigation of the water and energy balance in hydrologic models can lead to a more accurate estimation of hydrological fluxes and state variables, such as evapotranspiration and soil moisture. Hydrologic models are usually calibrated against discharge measurements, and thus are only trained on information of few points within a catchment. This procedure does not take into account any spatio-temporal variability of fluxes or state variables. Satellite data are a useful source of information to account for this spatial distributions. The objective of this study is to calibrate the distributed hydrological model mHM with satellite derived Land Surface Temperature (LST) fields provided by the Land Surface Analysis - Satellite Application Facility (LSA-SAF). LST is preferred to other satellite products such as soil moisture or evapotranspiration due to its higher precision. LST is obtained by solving the energy balance by assuming that the soil heat flux and the storage term are negligible on a daily time step. The evapotranspiration is determined by closing the water balance in mHM. The net radiation is calculated by using the incoming short- and longwave radiation, albedo and emissivity data provided by LSA-SAF. The Multiscale Parameter Regionalization technique (MPR, Samaniego et al. 2010) is used to determine the aerodynamic resistance among other parameters. The optimization is performed within the time period 2008-2010 using three objective functions that consider 1) only discharge, 2) only LST, and 3) a combination of both. The proposed method is applied to seven major German river basins: Danube, Ems, Main, Mulde, Neckar, Saale, and Weser. The annual coefficient of correlation between LSA-SAF incoming shortwave radiation and 28 meteorological stations operated by the German Weather Service (DWD) is 0.94 (RMSE = 29 W m-2) in 2009. LSA-SAF incoming longwave radiation could be further evaluated at two eddy covariance stations with a very similar

  2. An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions

    Science.gov (United States)

    Kim, Edward

    2012-01-01

    Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201l. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record -- provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica--parameters such as surface temperature.

  3. Phase calibration of the EISCAT Svalbard Radar interferometer using optical satellite signatures

    Directory of Open Access Journals (Sweden)

    J. M. Sullivan

    2006-09-01

    Full Text Available The link between natural ion-line enhancements in radar spectra and auroral activity has been the subject of recent studies but conclusions have been limited by the spatial and temporal resolution previously available. The next challenge is to use shorter sub-second integration times in combination with interferometric programmes to resolve spatial structure within the main radar beam, and so relate enhanced filaments to individual auroral rays. This paper presents initial studies of a technique, using optical and spectral satellite signatures, to calibrate the received phase of a signal with the position of the scattering source along the interferometric baseline of the EISCAT Svalbard Radar. It is shown that a consistent relationship can be found only if the satellite passage through the phase fringes is adjusted from the passage predicted by optical tracking. This required adjustment is interpreted as being due to the vector between the theoretical focusing points of the two antennae, i.e. the true radar baseline, differing from the baseline obtained by survey between the antenna foot points. A method to obtain a measurement of the true interferometric baseline using multiple satellite passes is outlined.

  4. Calibration for CHAMP Accelerometer Data Based on Crossover Points of the Satellite

    Institute of Scientific and Technical Information of China (English)

    XU Tianhe; YANG Yuanxi

    2005-01-01

    The German CHAlleging Minisatellite Payload (CHAMP) was launched in July 2000. It is the first satellite that provides us with position and accelerometer measurements, with which the gravity field model can be determined. One of the most popular methods for geopotential recovery using the position and accelerometer measurements of CHAMP is the energy conservation method. The main aim of this paper is to determine the scale and bias parameters of CHAMP accelerometer data using the energy conservation method. The basic principle and mathematical model using the crossover points of CHAMP orbit to calibrate the accelerometer data are given based on the energy balance method. The rigorous integral formula as well as its discrete form of the observational equation is presented. This method can be used to estimate only one of the scale and bias parameters or both of them. In order to control the influence of outliers, the robust estimator for the calibration parameters is given. The results of the numerical computations and comparisons using the CHAMP accelerometer data show the validity of the method.

  5. Still to Learn from Vicarious Learning

    Science.gov (United States)

    Mayes, J. T.

    2015-01-01

    The term "vicarious learning" was introduced in the 1960s by Bandura, who demonstrated how learning can occur through observing the behaviour of others. Such social learning is effective without the need for the observer to experience feedback directly. More than twenty years later a series of studies on vicarious learning was undertaken…

  6. An Optical Sensor Network for Vegetation Phenology Monitoring and Satellite Data Calibration

    Directory of Open Access Journals (Sweden)

    Michal Heliasz

    2011-08-01

    Full Text Available We present a network of sites across Fennoscandia for optical sampling of vegetation properties relevant for phenology monitoring and satellite data calibration. The network currently consists of five sites, distributed along an N-S gradient through Sweden and Finland. Two sites are located in coniferous forests, one in a deciduous forest, and two on peatland. The instrumentation consists of dual-beam sensors measuring incoming and reflected red, green, NIR, and PAR fluxes at 10-min intervals, year-round. The sensors are mounted on separate masts or in flux towers in order to capture radiation reflected from within the flux footprint of current eddy covariance measurements. Our computations and model simulations demonstrate the validity of using off-nadir sampling, and we show the results from the first year of measurement. NDVI is computed and compared to that of the MODIS instrument on-board Aqua and Terra satellite platforms. PAR fluxes are partitioned into reflected and absorbed components for the ground and canopy. The measurements demonstrate that the instrumentation provides detailed information about the vegetation phenology and variations in reflectance due to snow cover variations and vegetation development. Valuable information about PAR absorption of ground and canopy is obtained that may be linked to vegetation productivity.

  7. An optical sensor network for vegetation phenology monitoring and satellite data calibration.

    Science.gov (United States)

    Eklundh, Lars; Jin, Hongxiao; Schubert, Per; Guzinski, Radoslaw; Heliasz, Michal

    2011-01-01

    We present a network of sites across Fennoscandia for optical sampling of vegetation properties relevant for phenology monitoring and satellite data calibration. The network currently consists of five sites, distributed along an N-S gradient through Sweden and Finland. Two sites are located in coniferous forests, one in a deciduous forest, and two on peatland. The instrumentation consists of dual-beam sensors measuring incoming and reflected red, green, NIR, and PAR fluxes at 10-min intervals, year-round. The sensors are mounted on separate masts or in flux towers in order to capture radiation reflected from within the flux footprint of current eddy covariance measurements. Our computations and model simulations demonstrate the validity of using off-nadir sampling, and we show the results from the first year of measurement. NDVI is computed and compared to that of the MODIS instrument on-board Aqua and Terra satellite platforms. PAR fluxes are partitioned into reflected and absorbed components for the ground and canopy. The measurements demonstrate that the instrumentation provides detailed information about the vegetation phenology and variations in reflectance due to snow cover variations and vegetation development. Valuable information about PAR absorption of ground and canopy is obtained that may be linked to vegetation productivity.

  8. The on-orbit calibration of geometric parameters of the Tian-Hui 1 (TH-1) satellite

    Science.gov (United States)

    Wang, Jianrong; Wang, Renxiang; Hu, Xin; Su, Zhongbo

    2017-02-01

    The on-orbit calibration of geometric parameters is a key step in improving the location accuracy of satellite images without using Ground Control Points (GCPs). Most methods of on-orbit calibration are based on the self-calibration using additional parameters. When using additional parameters, different number of additional parameters may lead to different results. The triangulation bundle adjustment is another way to calibrate the geometric parameters of camera, which can describe the changes in each geometric parameter. When triangulation bundle adjustment method is applied to calibrate geometric parameters, a prerequisite is that the strip model can avoid systematic deformation caused by the rate of attitude changes. Concerning the stereo camera, the influence of the intersection angle should be considered during calibration. The Equivalent Frame Photo (EFP) bundle adjustment based on the Line-Matrix CCD (LMCCD) image can solve the systematic distortion of the strip model, and obtain high accuracy location without using GCPs. In this paper, the triangulation bundle adjustment is used to calibrate the geometric parameters of TH-1 satellite cameras based on LMCCD image. During the bundle adjustment, the three-line array cameras are reconstructed by adopting the principle of inverse triangulation. Finally, the geometric accuracy is validated before and after on-orbit calibration using 5 testing fields. After on-orbit calibration, the 3D geometric accuracy is improved to 11.8 m from 170 m. The results show that the location accuracy of TH-1 without using GCPs is significantly improved using the on-orbit calibration of the geometric parameters.

  9. Multi-variable calibration of a semi-distributed hydrological model using streamflow data and satellite-based evapotranspiration

    NARCIS (Netherlands)

    Rientjes, T.H.M.; Muthuwatta, L.P.; Bos, M.G.; Booij, M.J.; Bhatti, H.A.

    2013-01-01

    In this study, streamflow (Qs) and satellite-based actual evapotranspiration (ETa) are used in a multi-variable calibration framework to reproduce the catchment water balance. The application is for the HBV rainfall–runoff model at daily time-step for the Karkheh River Basin (51,000 km2) in Iran. Mo

  10. Can satellite land surface temperature data be used similarly to ground discharge measurements for distributed hydrological model calibration?

    NARCIS (Netherlands)

    Corbari, C.; Mancini, M.; Li, J.; Su, Zhongbo

    2015-01-01

    This study proposes a new methodology for the calibration of distributed hydrological models at basin scale by constraining an internal model variable using satellite data of land surface temperature. The model algorithm solves the system of energy and mass balances in terms of a representative equi

  11. Dispersal, vicariance, and timing of diversification in Nothonotus darters.

    Science.gov (United States)

    Near, Thomas J; Keck, Benjamin P

    2005-10-01

    The species diversity of North American freshwater fishes is unparalleled among temperate regions of the planet. This diversity is concentrated in the Central Highlands of eastern North America and this distribution pattern has inspired different models involving either dispersal or vicariance to explain the high species diversity of North American fishes. The most popular of these models is the Central Highlands vicariance hypothesis (CHVH), which proposes an ancient and diverse widespread fauna that existed across a previously continuous highland landscape that is much different from today. The mechanisms of isolation in the CHVH involve specific instances of vicariance that affected several diverse lineages of Central Highlands fishes. We tested predictions of the CHVH and alternative models using a cytochrome b-inferred phylogeny of the darter clade Nothonotus. A Bayesian mixed-model method was used for phylogenetic analysis. The phylogenetic data set included all 20 recognized Nothonotus species, and most species were represented with multiple sequences. We were able to convert genetic branch lengths to absolute age using external fossil calibrations in the freshwater perciform fish clade Centrarchidae. Using a well-resolved Nothonotus phylogeny and divergence time estimates, we identify equal numbers of instances of both vicariance and dispersal among disjunct regions of the Central Highlands, biogeographic pseudocongruence, rather recent speciation in Nothonotus, and a surprisingly large amount of speciation within highland areas. With regard to Nothonotus, previous Central Highlands biogeographic models offer little in the way of providing possible mechanisms responsible for diversification in the clade. Patterns of speciation in Nothonotus are similar to those discovered in recent efforts that have included speciation as a parameter into classic models of island biogeography.

  12. Calibration of a large-scale hydrological model using satellite-based soil moisture and evapotranspiration products

    Directory of Open Access Journals (Sweden)

    P. López López

    2017-06-01

    Full Text Available A considerable number of river basins around the world lack sufficient ground observations of hydro-meteorological data for effective water resources assessment and management. Several approaches can be developed to increase the quality and availability of data in these poorly gauged or ungauged river basins; among them, the use of Earth observations products has recently become promising. Earth observations of various environmental variables can be used potentially to increase knowledge about the hydrological processes in the basin and to improve streamflow model estimates, via assimilation or calibration. The present study aims to calibrate the large-scale hydrological model PCRaster GLOBal Water Balance (PCR-GLOBWB using satellite-based products of evapotranspiration and soil moisture for the Moroccan Oum er Rbia River basin. Daily simulations at a spatial resolution of 5  ×  5 arcmin are performed with varying parameters values for the 32-year period 1979–2010. Five different calibration scenarios are inter-compared: (i reference scenario using the hydrological model with the standard parameterization, (ii calibration using in situ-observed discharge time series, (iii calibration using the Global Land Evaporation Amsterdam Model (GLEAM actual evapotranspiration time series, (iv calibration using ESA Climate Change Initiative (CCI surface soil moisture time series and (v step-wise calibration using GLEAM actual evapotranspiration and ESA CCI surface soil moisture time series. The impact on discharge estimates of precipitation in comparison with model parameters calibration is investigated using three global precipitation products, including ERA-Interim (EI, WATCH Forcing methodology applied to ERA-Interim reanalysis data (WFDEI and Multi-Source Weighted-Ensemble Precipitation data by merging gauge, satellite and reanalysis data (MSWEP. Results show that GLEAM evapotranspiration and ESA CCI soil moisture may be used for model

  13. Calibration of a large-scale hydrological model using satellite-based soil moisture and evapotranspiration products

    Science.gov (United States)

    López López, Patricia; Sutanudjaja, Edwin H.; Schellekens, Jaap; Sterk, Geert; Bierkens, Marc F. P.

    2017-06-01

    A considerable number of river basins around the world lack sufficient ground observations of hydro-meteorological data for effective water resources assessment and management. Several approaches can be developed to increase the quality and availability of data in these poorly gauged or ungauged river basins; among them, the use of Earth observations products has recently become promising. Earth observations of various environmental variables can be used potentially to increase knowledge about the hydrological processes in the basin and to improve streamflow model estimates, via assimilation or calibration. The present study aims to calibrate the large-scale hydrological model PCRaster GLOBal Water Balance (PCR-GLOBWB) using satellite-based products of evapotranspiration and soil moisture for the Moroccan Oum er Rbia River basin. Daily simulations at a spatial resolution of 5 × 5 arcmin are performed with varying parameters values for the 32-year period 1979-2010. Five different calibration scenarios are inter-compared: (i) reference scenario using the hydrological model with the standard parameterization, (ii) calibration using in situ-observed discharge time series, (iii) calibration using the Global Land Evaporation Amsterdam Model (GLEAM) actual evapotranspiration time series, (iv) calibration using ESA Climate Change Initiative (CCI) surface soil moisture time series and (v) step-wise calibration using GLEAM actual evapotranspiration and ESA CCI surface soil moisture time series. The impact on discharge estimates of precipitation in comparison with model parameters calibration is investigated using three global precipitation products, including ERA-Interim (EI), WATCH Forcing methodology applied to ERA-Interim reanalysis data (WFDEI) and Multi-Source Weighted-Ensemble Precipitation data by merging gauge, satellite and reanalysis data (MSWEP). Results show that GLEAM evapotranspiration and ESA CCI soil moisture may be used for model calibration resulting in

  14. Community Radiative Transfer Model for Inter-Satellites Calibration and Verification

    Science.gov (United States)

    Liu, Q.; Nalli, N. R.; Ignatov, A.; Garrett, K.; Chen, Y.; Weng, F.; Boukabara, S. A.; van Delst, P. F.; Groff, D. N.; Collard, A.; Joseph, E.; Morris, V. R.; Minnett, P. J.

    2014-12-01

    Developed at the Joint Center for Satellite Data Assimilation, the Community Radiative Transfer Model (CRTM) [1], operationally supports satellite radiance assimilation for weather forecasting. The CRTM also supports JPSS/NPP and GOES-R missions [2] for instrument calibration, validation, monitoring long-term trending, and satellite retrieved products [3]. The CRTM is used daily at the NOAA NCEP to quantify the biases and standard deviations between radiance simulations and satellite radiance measurements in a time series and angular dependency. The purposes of monitoring the data assimilation system are to ensure the proper performance of the assimilation system and to diagnose problems with the system for future improvements. The CRTM is a very useful tool for cross-sensor verifications. Using the double difference method, it can remove the biases caused by slight differences in spectral response and geometric angles between measurements of the two instruments. The CRTM is particularly useful to reduce the difference between instruments for climate studies [4]. In this study, we will carry out the assessment of the Suomi National Polar-orbiting Partnership (SNPP) [5] Cross-track Infrared Sounder (CrIS) data [6], Advanced Technology Microwave Sounder (ATMS) data, and data for Visible Infrared Imaging Radiometer Suite (VIIRS) [7][8] thermal emissive bands. We use dedicated radiosondes and surface data acquired from NOAA Aerosols and Ocean Science Expeditions (AEROSE) [9]. The high quality radiosondes were launched when Suomi NPP flew over NOAA Ship Ronald H. Brown situated in the tropical Atlantic Ocean. The atmospheric data include profiles of temperature, water vapor, and ozone, as well as total aerosol optical depths. The surface data includes air temperature and humidity at 2 meters, skin temperature (Marine Atmospheric Emitted Radiance Interferometer, M-AERI [10]), surface temperature, and surface wind vector. [1] Liu, Q., and F. Weng, 2006: JAS [2] Liu, Q

  15. BeiDou inter-satellite-type bias evaluation and calibration for mixed receiver attitude determination

    NARCIS (Netherlands)

    Nadarajah, N.; Teunissen, P.J.G.; Raziq, N.

    2013-01-01

    The Chinese BeiDou system (BDS), having different types of satellites, is an important addition to the ever growing system of Global Navigation Satellite Systems (GNSS). It consists of Geostationary Earth Orbit (GEO) satellites, Inclined Geosynchronous Satellite Orbit (IGSO) satellites and Medium

  16. BeiDou inter-satellite-type bias evaluation and calibration for mixed receiver attitude determination

    NARCIS (Netherlands)

    Nadarajah, N.; Teunissen, P.J.G.; Raziq, N.

    2013-01-01

    The Chinese BeiDou system (BDS), having different types of satellites, is an important addition to the ever growing system of Global Navigation Satellite Systems (GNSS). It consists of Geostationary Earth Orbit (GEO) satellites, Inclined Geosynchronous Satellite Orbit (IGSO) satellites and Medium Ea

  17. Post launch calibration and testing of the Geostationary Lightning Mapper on GOES-R satellite

    Science.gov (United States)

    Rafal, Marc; Clarke, Jared T.; Cholvibul, Ruth W.

    2016-05-01

    The Geostationary Operational Environmental Satellite R (GOES-R) series is the planned next generation of operational weather satellites for the United States National Oceanic and Atmospheric Administration (NOAA). The National Aeronautics and Space Administration (NASA) is procuring the GOES-R spacecraft and instruments with the first launch of the GOES-R series planned for October 2016. Included in the GOES-R Instrument suite is the Geostationary Lightning Mapper (GLM). GLM is a single-channel, near-infrared optical detector that can sense extremely brief (800 μs) transient changes in the atmosphere, indicating the presence of lightning. GLM will measure total lightning activity continuously over the Americas and adjacent ocean regions with near-uniform spatial resolution of approximately 10 km. Due to its large CCD (1372x1300 pixels), high frame rate, sensitivity and onboard event filtering, GLM will require extensive post launch characterization and calibration. Daytime and nighttime images will be used to characterize both image quality criteria inherent to GLM as a space-based optic system (focus, stray light, crosstalk, solar glint) and programmable image processing criteria (dark offsets, gain, noise, linearity, dynamic range). In addition ground data filtering will be adjusted based on lightning-specific phenomenology (coherence) to isolate real from false transients with their own characteristics. These parameters will be updated, as needed, on orbit in an iterative process guided by pre-launch testing. This paper discusses the planned tests to be performed on GLM over the six-month Post Launch Test period to optimize and demonstrate GLM performance.

  18. Vicarious learning: a review of the literature.

    Science.gov (United States)

    Roberts, Debbie

    2010-01-01

    Experiential learning theory stresses the primacy of personal experience and the literature suggests that direct clinical experience is required in order for learning to take place. However, raw or first hand experience may not be the only mechanisms by which students engage in experiential learning. There is a growing body of literature within higher education which suggests that students are able to use another's experience to learn: vicarious learning. This literature review aims to outline vicarious learning within a nursing context. Many of the studies regarding vicarious learning are situated within Higher Education in general, however, within the United States these relate more specifically to nursing students. The literature indicates the increasing global interest in this area. This paper reveals that whilst the literature offers a number of examples illustrating how vicarious learning takes place, opinion on the role of the lecturer is divided and requires further exploration and clarification. The implications for nurse education are discussed.

  19. Vicarious Reinforcement In Rhesus Macaques (Macaca mulatta)

    OpenAIRE

    Chang, Steve W. C.; Amy A. Winecoff; Platt, Michael L.

    2011-01-01

    What happens to others profoundly influences our own behavior. Such other-regarding outcomes can drive observational learning, as well as motivate cooperation, charity, empathy, and even spite. Vicarious reinforcement may serve as one of the critical mechanisms mediating the influence of other-regarding outcomes on behavior and decision-making in groups. Here we show that rhesus macaques spontaneously derive vicarious reinforcement from observing rewards given to another monkey, and that t...

  20. Vicarious Reinforcement in Rhesus Macaques (Macaca Mulatta)

    OpenAIRE

    Chang, Steve W. C.; Amy A. Winecoff; Platt, Michael L.

    2011-01-01

    What happens to others profoundly influences our own behavior. Such other-regarding outcomes can drive observational learning, as well as motivate cooperation, charity, empathy, and even spite. Vicarious reinforcement may serve as one of the critical mechanisms mediating the influence of other-regarding outcomes on behavior and decision-making in groups. Here we show that rhesus macaques spontaneously derive vicarious reinforcement from observing rewards given to another monkey, and that this...

  1. The fixed-bias Langmuir probe on the Communication/Navigation Outage Forecast System satellite: calibration and validation.

    Science.gov (United States)

    Klenzing, J; Rowland, D

    2012-11-01

    A fixed-bias spherical Langmuir probe is included as part of the Vector Electric Field Instrument (VEFI) suite on the Communication/Navigation Outage Forecast System (C/NOFS) satellite. C/NOFS gathers data in the equatorial ionosphere between 400 and 860 km, where the primary constituent ions are H(+) and O(+). The ion current collected by the probe surface per unit plasma density is found to be a strong function of ion composition. The calibration of the collected current to an absolute density is discussed, and the performance of the spherical probe is compared to other in situ instruments on board the C/NOFS satellite. The application of the calibration is discussed with respect to future fixed-bias probes; in particular, it is demonstrated that some density fluctuations will be suppressed in the collected current if the plasma composition rapidly changes along with density. This is illustrated in the observation of plasma density enhancements on C/NOFS.

  2. The Fixed-Bias Langmuir Probe on the Communication-Navigation Outage Forecast System Satellite: Calibration and Validation

    Science.gov (United States)

    Klenzing, J.; Rowland, D.

    2012-01-01

    A fixed-bias spherical Langmuir probe is included as part of the Vector Electric Field Instrument (VEFI) suite on the Communication Navigation Outage Forecast System (CNOFS) satellite.CNOFS gathers data in the equatorial ionosphere between 400 and 860 km, where the primary constituent ions are H+ and O+. The ion current collected by the probe surface per unit plasma density is found to be a strong function of ion composition. The calibration of the collected current to an absolute density is discussed, and the performance of the spherical probe is compared to other in situ instruments on board the CNOFS satellite. The application of the calibration is discussed with respect to future fixed-bias probes; in particular, it is demonstrated that some density fluctuations will be suppressed in the collected current if the plasma composition rapidly changes along with density. This is illustrated in the observation of plasma density enhancements on CNOFS.

  3. VNIR, MWIR, and LWIR source assemblies for optical quality testing and spectro-radiometric calibration of earth observation satellites

    Science.gov (United States)

    Compain, Eric; Maquet, Philippe; Leblay, Pierrick; Gavaud, Eric; Marque, Julien; Glastre, Wilfried; Cortese, Maxime; Sugranes, Pierre; Gaillac, Stephanie; Potheau, Hervé

    2015-09-01

    This document presents several original OGSEs, Optical Ground Support Equipment, specifically designed and realized for the optical testing and calibration of earth observation satellites operating in a large spectral band from 0.4μm to 14.7μm. This work has been mainly supported by recent development dedicated to MTG, Meteosat Third Generation, the ESA next generation of meteorological satellites. The improved measurement capabilities of this new satellite generation has generated new challenging requirements for the associated optical test equipments. These improvements, based on design and component innovation will be illustrated for the MOTA, the GICS and the DEA OGSEs. MOTA and GICS are dedicated to the AIT, Assembly Integration and Test, of FCI, the Flexible Combined Imager of the imaging satellite MTG-I. DEA OGSE is dedicated to the AIT of the DEA, Detection Electronics Assembly, which is part of IRS instrument, an IR sounder part of MTG-S satellite. From an architectural point of view, the presented original designs enable to run many optical tests with a single system thanks to a limited configuration effort. Main measurement capabilities are optical quality testing (MTF based mainly on KEF measurement), Line of Sight (LoS) stability measurement, straylight analyses, VNIR-MWIR-LWIR focal plane array co-registration, and broadband large dynamic spectro-radiometric calibration. Depending on the AIT phase of the satellite, these source assemblies are operated at atmospheric pressure or under secondary vacuum. In operation, they are associated with an opto-mechanical projection system that enables to conjugate the image of the source assembly with the focal plane of the satellite instruments. These conjugation systems are usually based on high resolution, broadband collimator, and are optionally mounted on hexapod to address the entire field of instruments.

  4. Calibration of the Soft X-ray Telescopes (SXT) Onboard the ASTRO-H Satellite

    Science.gov (United States)

    Soong, Yang; Okajima, Takashi; Serlemitsos, Peter J.

    2013-01-01

    ASTRO-H is an astrophysics satellite dedicated for non-dispersive X-ray spectroscopic study on selective celestial X-ray sources. Among the onboard instruments there are four Wolter-I X-ray mirrors of their reflectors' figure in conical approximation. Two of the four are soft X-ray mirrors, of which the energy range is from a few hundred eV to 15 keV. The focal point instruments will be a calorimeter (SXS) and a CCD camera (SXI), respectively. The mirrors were in quadrant configuration with photons being reflected consecutively in the primary and secondary stage before landing on the focal plane of 5.6 m away from the interface between the two stages. The reflectors of the mirror are made of heat-formed aluminum substrate of the thickness gauged of 152 m, 229 m, and 305 m of the alloy 5052 H-19, followed by epoxy replication on gold-sputtered smooth Pyrex cylindrical mandrels to acquire the X-ray reflective surface. The epoxy layer is 10 m nominal and surface gold layer of 0.2 m. Improvements on angular response over its predecessors, e.g. Astro-E1/Suzaku mirrors, come from error reduction on the figure, the roundness, and the grazing angle/radius mismatching of the reflecting surface, and tighter specs and mechanical strength on supporting structure to reduce the reflector positioning and the assembly errors. Each soft x-ray telescope (SXT), FM1 or FM2, were integrated from four independent quadrants of mirrors. The stray-light baffles, in quadrant configuration, were mounted onto the integrated mirror. Thermal control units were attached to the perimeter of the integrated mirror to keep the mirror within operating temperature in space. The completed instrument went through a series of optical alignment, thus made the quadrant images confocal and their optical axes in parallel to achieve highest throughput possible. Environmental tests were carried out, and optical quality of the telescopes has been confirmed. The optical and x-ray calibrations also include

  5. Application of the Langley plot method to the calibration of the solar backscattered ultraviolet instrument on the Nimbus 7 satellite

    Science.gov (United States)

    Bhartia, P. K.; Taylor, S.; Mcpeters, R. D.; Wellemeyer, C.

    1995-01-01

    The concept of the well-known Langley plot technique, used for the calibration of ground-based instruments, has been generalized for application to satellite instruments. In polar regions, near summer solstice, the solar backscattered ultraviolet (SBUV) instrument on the Nimbus 7 satellite samples the same ozone field at widely different solar zenith angles. These measurements are compared to assess the long-term drift in the instrument calibration. Although the technique provides only a relative wavelength-to-wavelength calibration, it can be combined with existing techniques to determine the drift of the instrument at any wavelength. Using this technique, we have generated a 12-year data set of ozone vertical profiles from SBUV with an estimated accuracy of +/- 5% at 1 mbar and +/- 2% at 10 mbar (95% confidence) over 12 years. Since the method is insensitive to true changes in the atmospheric ozone profile, it can also be used to compare the calibrations of similar SBUV instruments launched without temporal overlap.

  6. BeiDou Inter-Satellite-Type Bias Evaluation and Calibration for Mixed Receiver Attitude Determination

    Directory of Open Access Journals (Sweden)

    Noor Raziq

    2013-07-01

    Full Text Available The Chinese BeiDou system (BDS, having different types of satellites, is an important addition to the ever growing system of Global Navigation Satellite Systems (GNSS. It consists of Geostationary Earth Orbit (GEO satellites, Inclined Geosynchronous Satellite Orbit (IGSO satellites and Medium Earth Orbit (MEO satellites. This paper investigates the receiver-dependent bias between these satellite types, for which we coined the name “inter-satellite-type bias” (ISTB, and its impact on mixed receiver attitude determination. Assuming different receiver types may have different delays/biases for different satellite types, we model the differential ISTBs among three BeiDou satellite types and investigate their existence and their impact on mixed receiver attitude determination. Our analyses using the real data sets from Curtin’s GNSS array consisting of different types of BeiDou enabled receivers and series of zero-baseline experiments with BeiDou-enabled receivers reveal the existence of non-zero ISTBs between different BeiDou satellite types. We then analyse the impact of these biases on BeiDou-only attitude determination using the constrained (C-LAMBDA method, which exploits the knowledge of baseline length. Results demonstrate that these biases could seriously affect the integer ambiguity resolution for attitude determination using mixed receiver types and that a priori correction of these biases will dramatically improve the success rate.

  7. HYDROGRAV - Hydrological model calibration and terrestrial water storage monitoring from GRACE gravimetry and satellite altimetry, First results

    DEFF Research Database (Denmark)

    Andersen, O.B.; Krogh, P.E.; Michailovsky, C.

    2008-01-01

    Space-borne and ground-based time-lapse gravity observations provide new data for water balance monitoring and hydrological model calibration in the future. The HYDROGRAV project (www.hydrograv.dk) will explore the utility of time-lapse gravity surveys for hydrological model calibration and terre......Space-borne and ground-based time-lapse gravity observations provide new data for water balance monitoring and hydrological model calibration in the future. The HYDROGRAV project (www.hydrograv.dk) will explore the utility of time-lapse gravity surveys for hydrological model calibration...... and terrestrial water storage monitoring. Merging remote sensing data from GRACE with other remote sensing data like satellite altimetry and also ground based observations are important to hydrological model calibration and water balance monitoring of large regions and can serve as either supplement or as vital...... change from 2002 to 2008 along with in-situ gravity time-lapse observations and radar altimetry monitoring of surface water for the southern Africa river basins will be presented....

  8. Evaluation on Radiometric Capability of Chinese Optical Satellite Sensors

    Science.gov (United States)

    Yang, Aixia; Zhong, Bo; Wu, Shanlong; Liu, Qinhuo

    2017-01-01

    The radiometric capability of on-orbit sensors should be updated on time due to changes induced by space environmental factors and instrument aging. Some sensors, such as Moderate Resolution Imaging Spectroradiometer (MODIS), have onboard calibrators, which enable real-time calibration. However, most Chinese remote sensing satellite sensors lack onboard calibrators. Their radiometric calibrations have been updated once a year based on a vicarious calibration procedure, which has affected the applications of the data. Therefore, a full evaluation of the sensors’ radiometric capabilities is essential before quantitative applications can be made. In this study, a comprehensive procedure for evaluating the radiometric capability of several Chinese optical satellite sensors is proposed. In this procedure, long-term radiometric stability and radiometric accuracy are the two major indicators for radiometric evaluation. The radiometric temporal stability is analyzed by the tendency of long-term top-of-atmosphere (TOA) reflectance variation; the radiometric accuracy is determined by comparison with the TOA reflectance from MODIS after spectrally matching. Three Chinese sensors including the Charge-Coupled Device (CCD) camera onboard Huan Jing 1 satellite (HJ-1), as well as the Visible and Infrared Radiometer (VIRR) and Medium-Resolution Spectral Imager (MERSI) onboard the Feng Yun 3 satellite (FY-3) are evaluated in reflective bands based on this procedure. The results are reasonable, and thus can provide reliable reference for the sensors’ application, and as such will promote the development of Chinese satellite data. PMID:28117745

  9. First results about on-ground calibration of the Silicon Tracker for the AGILE satellite

    CERN Document Server

    Cattaneo, P W; Boffelli, F; Bulgarelli, A; Buonomo, B; Chen, A W; D'Ammando, F; Froysland, T; Fuschino, F; Galli, M; Gianotti, F; Giuliani, A; Longo, F; Marisaldi, M; Mazzitelli, G; Pellizzoni, A; Prest, M; Pucella, G; Quintieri, L; Rappoldi, A; Tavani, M; Trifoglio, M; Trois, A; Valente, P; Vallazza, E; Vercellone, S; Zambra, A; Barbiellini, G; Caraveo, P; Cocco, V; Costa, E; De Paris, G; Del Monte, E; Di Cocco, G; Donnarumma, I; Evangelista, Y; Feroci, M; Ferrari, A; Fiorini, M; Labanti, C; Lapshov, I; Lazzarotto, F; Lipari, P; Mastropietro, M; Mereghetti, S; Morelli, E; Moretti, E; Morselli, A; Pacciani, L; Perotti, F; Piano, G; Picozza, P; Pilia, M; Porrovecchio, G; Rapisarda, M; Rubini, A; Sabatini, S; Soffitta, P; Striani, E; Vittorini, V; Zanello, D; Colafrancesco, S; Giommi, P; Pittori, C; Santolamazza, P; Verrecchia, F; Salotti, L

    2011-01-01

    The AGILE scientific instrument has been calibrated with a tagged $\\gamma$-ray beam at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali di Frascati (LNF). The goal of the calibration was the measure of the Point Spread Function (PSF) as a function of the photon energy and incident angle and the validation of the Monte Carlo (MC) simulation of the silicon tracker operation. The calibration setup is described and some preliminary results are presented.

  10. An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions with Climate Data Record Applications

    Science.gov (United States)

    Kim, E. J.

    2011-12-01

    surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 2011. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record-provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica-parameters such as surface temperature.

  11. Imager-to-Radiometer In-flight Cross Calibration: RSP Radiometric Comparison with Airborne and Satellite Sensors

    Science.gov (United States)

    McCorkel, Joel; Cairns, Brian; Wasilewski, Andrzej

    2016-01-01

    This work develops a method to compare the radiometric calibration between a radiometer and imagers hosted on aircraft and satellites. The radiometer is the airborne Research Scanning Polarimeter (RSP), which takes multi-angle, photo-polarimetric measurements in several spectral channels. The RSP measurements used in this work were coincident with measurements made by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), which was on the same aircraft. These airborne measurements were also coincident with an overpass of the Landsat 8 Operational Land Imager (OLI). First we compare the RSP and OLI radiance measurements to AVIRIS since the spectral response of the multispectral instruments can be used to synthesize a spectrally equivalent signal from the imaging spectrometer data. We then explore a method that uses AVIRIS as a transfer between RSP and OLI to show that radiometric traceability of a satellite-based imager can be used to calibrate a radiometer despite differences in spectral channel sensitivities. This calibration transfer shows agreement within the uncertainty of both the various instruments for most spectral channels.

  12. On-Ground Processing of Yaogan-24 Remote Sensing Satellite Attitude Data and Verification Using Geometric Field Calibration.

    Science.gov (United States)

    Wang, Mi; Fan, Chengcheng; Yang, Bo; Jin, Shuying; Pan, Jun

    2016-07-30

    Satellite attitude accuracy is an important factor affecting the geometric processing accuracy of high-resolution optical satellite imagery. To address the problem whereby the accuracy of the Yaogan-24 remote sensing satellite's on-board attitude data processing is not high enough and thus cannot meet its image geometry processing requirements, we developed an approach involving on-ground attitude data processing and digital orthophoto (DOM) and the digital elevation model (DEM) verification of a geometric calibration field. The approach focuses on three modules: on-ground processing based on bidirectional filter, overall weighted smoothing and fitting, and evaluation in the geometric calibration field. Our experimental results demonstrate that the proposed on-ground processing method is both robust and feasible, which ensures the reliability of the observation data quality, convergence and stability of the parameter estimation model. In addition, both the Euler angle and quaternion could be used to build a mathematical fitting model, while the orthogonal polynomial fitting model is more suitable for modeling the attitude parameter. Furthermore, compared to the image geometric processing results based on on-board attitude data, the image uncontrolled and relative geometric positioning result accuracy can be increased by about 50%.

  13. Music evokes vicarious emotions in listeners.

    Science.gov (United States)

    Kawakami, Ai; Furukawa, Kiyoshi; Okanoya, Kazuo

    2014-01-01

    Why do we listen to sad music? We seek to answer this question using a psychological approach. It is possible to distinguish perceived emotions from those that are experienced. Therefore, we hypothesized that, although sad music is perceived as sad, listeners actually feel (experience) pleasant emotions concurrent with sadness. This hypothesis was supported, which led us to question whether sadness in the context of art is truly an unpleasant emotion. While experiencing sadness may be unpleasant, it may also be somewhat pleasant when experienced in the context of art, for example, when listening to sad music. We consider musically evoked emotion vicarious, as we are not threatened when we experience it, in the way that we can be during the course of experiencing emotion in daily life. When we listen to sad music, we experience vicarious sadness. In this review, we propose two sides to sadness by suggesting vicarious emotion.

  14. Vicarious reinforcement in rhesus macaques (macaca mulatta).

    Science.gov (United States)

    Chang, Steve W C; Winecoff, Amy A; Platt, Michael L

    2011-01-01

    What happens to others profoundly influences our own behavior. Such other-regarding outcomes can drive observational learning, as well as motivate cooperation, charity, empathy, and even spite. Vicarious reinforcement may serve as one of the critical mechanisms mediating the influence of other-regarding outcomes on behavior and decision-making in groups. Here we show that rhesus macaques spontaneously derive vicarious reinforcement from observing rewards given to another monkey, and that this reinforcement can motivate them to subsequently deliver or withhold rewards from the other animal. We exploited Pavlovian and instrumental conditioning to associate rewards to self (M1) and/or rewards to another monkey (M2) with visual cues. M1s made more errors in the instrumental trials when cues predicted reward to M2 compared to when cues predicted reward to M1, but made even more errors when cues predicted reward to no one. In subsequent preference tests between pairs of conditioned cues, M1s preferred cues paired with reward to M2 over cues paired with reward to no one. By contrast, M1s preferred cues paired with reward to self over cues paired with reward to both monkeys simultaneously. Rates of attention to M2 strongly predicted the strength and valence of vicarious reinforcement. These patterns of behavior, which were absent in non-social control trials, are consistent with vicarious reinforcement based upon sensitivity to observed, or counterfactual, outcomes with respect to another individual. Vicarious reward may play a critical role in shaping cooperation and competition, as well as motivating observational learning and group coordination in rhesus macaques, much as it does in humans. We propose that vicarious reinforcement signals mediate these behaviors via homologous neural circuits involved in reinforcement learning and decision-making.

  15. Vicarious Reinforcement In Rhesus Macaques (Macaca mulatta

    Directory of Open Access Journals (Sweden)

    Steve W. C. Chang

    2011-03-01

    Full Text Available What happens to others profoundly influences our own behavior. Such other-regarding outcomes can drive observational learning, as well as motivate cooperation, charity, empathy, and even spite. Vicarious reinforcement may serve as one of the critical mechanisms mediating the influence of other-regarding outcomes on behavior and decision-making in groups. Here we show that rhesus macaques spontaneously derive vicarious reinforcement from observing rewards given to another monkey, and that this reinforcement can motivate them to subsequently deliver or withhold rewards from the other animal. We exploited Pavlovian and instrumental conditioning to associate rewards to self (M1 and/or rewards to another monkey (M2 with visual cues. M1s made more errors in the instrumental trials when cues predicted reward to M2 compared to when cues predicted reward to M1, but made even more errors when cues predicted reward to no one. In subsequent preference tests between pairs of conditioned cues, M1s preferred cues paired with reward to M2 over cues paired with reward to no one. By contrast, M1s preferred cues paired with reward to self over cues paired with reward to both monkeys simultaneously. Rates of attention to M2 strongly predicted the strength and valence of vicarious reinforcement. These patterns of behavior, which were absent in nonsocial control trials, are consistent with vicarious reinforcement based upon sensitivity to observed, or counterfactual, outcomes with respect to another individual. Vicarious reward may play a critical role in shaping cooperation and competition, as well as motivating observational learning and group coordination in rhesus macaques, much as it does in humans. We propose that vicarious reinforcement signals mediate these behaviors via homologous neural circuits involved in reinforcement learning and decision-making.

  16. Late Cretaceous vicariance in Gondwanan amphibians.

    Directory of Open Access Journals (Sweden)

    Ines Van Bocxlaer

    Full Text Available Overseas dispersals are often invoked when Southern Hemisphere terrestrial and freshwater organism phylogenies do not fit the sequence or timing of Gondwana fragmentation. We used dispersal-vicariance analyses and molecular timetrees to show that two species-rich frog groups, Microhylidae and Natatanura, display congruent patterns of spatial and temporal diversification among Gondwanan plates in the Late Cretaceous, long after the presumed major tectonic break-up events. Because amphibians are notoriously salt-intolerant, these analogies are best explained by simultaneous vicariance, rather than by oceanic dispersal. Hence our results imply Late Cretaceous connections between most adjacent Gondwanan landmasses, an essential concept for biogeographic and palaeomap reconstructions.

  17. The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

    Science.gov (United States)

    Munro, Rosemary; Lang, Rüdiger; Klaes, Dieter; Poli, Gabriele; Retscher, Christian; Lindstrot, Rasmus; Huckle, Roger; Lacan, Antoine; Grzegorski, Michael; Holdak, Andriy; Kokhanovsky, Alexander; Livschitz, Jakob; Eisinger, Michael

    2016-03-01

    The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterization activities, in-flight calibration, and level 0 to 1 data processing. The current status of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarizes a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

  18. Calibration of HY-2A satellite significant wave heights within situ observation

    Institute of Scientific and Technical Information of China (English)

    PENG Hailong; LIN Mingsen

    2016-01-01

    Significant wave height (SWH) can be computed from the returning waveform of radar altimeter, this parameter is only raw estimates if it does not calibrate. But accurate calibration is important for all applications, especially for climate studies. HY-2a altimeter has been operational since April 2012 and its products are available to the scientific community. In this work, SWH data from HY-2A altimeters are calibrated againstin situ buoy data from the National Data Buoy Center (NDBC), Distinguished from previous calibration studies which generally regarded buoy data as "truth", the work of calibration for HY-2A altimeter wave data againstin situ buoys was applied a more sophisticated statistical technique—the total least squares (TLS) method which can take into account errors in both variables. We present calibration results for HY-2A radar altimeter measurement of wave height against NDBC buoys. In addition, cross-calibration for HY-2A and Jason-2 wave data are talked over and the result is given.

  19. Sur la notion linguistique de vicariance (On the linguistic notion of vicariance

    Directory of Open Access Journals (Sweden)

    Samuel Bidaud

    2013-12-01

    Full Text Available Nous proposons ici une définition de la notion de "vicariance". En effet, les grammairiens français qui utilisent ce concept ne l’ont pas défini de façon précise. Nous verrons quelle est la spécificité des mots vicariants, qui peuvent être définis comme des mots avec un sémantisme abstrait qui sont sémantiquement identiques avec leur antécédent. (We try here to propose a definition of the notion of "vicariance". Indeed, the French grammarians who use this concept have not defined it precisely. We will see the specificity of the vicariant words, which can be defined as words with an abstract sense which are semantically identical with their antecedent.

  20. Gemini Planet Imager Observational Calibrations VIII: Characterization and Role of Satellite Spots

    CERN Document Server

    Wang, Jason J; Graham, James R; Savransky, Dmitry; Ingraham, Patrick J; Ward-Duong, Kimberly; Patience, Jennifer; De Rosa, Robert J; Bulger, Joanna; Sivaramakrishnan, Anand; Perrin, Marshall D; Thomas, Sandrine J; Sadakuni, Naru; Greenbaum, Alexandra Z; Pueyo, Laurent; Marois, Christian; Oppenheimer, Ben R; Kalas, Paul; Cardwell, Andrew; Goodsell, Stephen; Hibon, Pascale; Rantakyrö, Fredrik T

    2014-01-01

    The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a square grid in the pupil plane, can be used to locate the star and extract its spectrum. We describe the techniques implemented into the GPI Data Reduction Pipeline to measure the properties of the satellite spots and discuss the precision of the reconstructed astrometry and spectrophotometry of the occulted star. We find the astrometric precision of the satellite spots in an $H$-band datacube to be $0.05$ pixels and is best when individual satellite spots have a signal to noise ratio (SNR) of $> 20$. In regards to satellite spot spectrophotometry, we find that the total flux from the satellite spots is stable to $\\sim 7\\...

  1. Absolute radiometric calibration of Landsat using a pseudo invariant calibration site

    Science.gov (United States)

    Helder, D.; Thome, K.J.; Mishra, N.; Chander, G.; Xiong, Xiaoxiong; Angal, A.; Choi, Tae-young

    2013-01-01

    Pseudo invariant calibration sites (PICS) have been used for on-orbit radiometric trending of optical satellite systems for more than 15 years. This approach to vicarious calibration has demonstrated a high degree of reliability and repeatability at the level of 1-3% depending on the site, spectral channel, and imaging geometries. A variety of sensors have used this approach for trending because it is broadly applicable and easy to implement. Models to describe the surface reflectance properties, as well as the intervening atmosphere have also been developed to improve the precision of the method. However, one limiting factor of using PICS is that an absolute calibration capability has not yet been fully developed. Because of this, PICS are primarily limited to providing only long term trending information for individual sensors or cross-calibration opportunities between two sensors. This paper builds an argument that PICS can be used more extensively for absolute calibration. To illustrate this, a simple empirical model is developed for the well-known Libya 4 PICS based on observations by Terra MODIS and EO-1 Hyperion. The model is validated by comparing model predicted top-of-atmosphere reflectance values to actual measurements made by the Landsat ETM+ sensor reflective bands. Following this, an outline is presented to develop a more comprehensive and accurate PICS absolute calibration model that can be Système international d'unités (SI) traceable. These initial concepts suggest that absolute calibration using PICS is possible on a broad scale and can lead to improved on-orbit calibration capabilities for optical satellite sensors.

  2. Use of multiple in situ instruments and remote sensed satellite data for calibration tests at Solfatara (Campi Flegrei volcanic area)

    Science.gov (United States)

    Silvestri, Malvina; Musacchio, Massimo; Fabrizia Buongiorno, Maria; Doumaz, Fawzi; Andres Diaz, Jorge

    2017-04-01

    Monitoring natural hazards such as active volcanoes requires specific instruments to measure many parameters (gas emissions, surface temperatures, surface deformation etc.) to determine the activity level of a volcano. Volcanoes in most cases present difficult and dangerous environment for scientists who need to take in situ measurements. Remote Sensing systems on board of satellite permit to measure a large number of parameters especially during the eruptive events but still show large limits to monitor volcanic precursors and phenomena at local scale (gas species emitted by fumarole or summit craters degassing plumes and surface thermal changes of few degrees) for their specific risk. For such reason unmanned aircraft systems (UAS) mounting a variety of multigas sensors instruments (such as miniature mass spectrometer) or single specie sensors (such as electrochemical and IR sensors) allow a safe monitoring of volcanic activities. With this technology, it is possible to perform monitoring measurements of volcanic activity without risking the lives of scientists and personnel performing analysis during the field campaigns in areas of high volcanic activity and supporting the calibration and validation of satellite data measurements. These systems allowed the acquisition of real-time information such as temperature, pressure, relative humidity, SO2, H2S, CO2 contained in degassing plume and fumaroles, with GPS geolocation. The acquired data are both stored in the sensor and transmitted to a computer for real time viewing information. Information in the form of 3D concentration maps can be returned. The equipment used during the campaigns at Solfatara Volcano (in 2014, 2015 and 2016) was miniaturized instruments allowed measurements conducted either by flying drones over the fumarolic sites and by hand carrying into the fumaroles. We present the results of the field campaign held in different years at the Solfatara of Pozzuoli, near Naples, concerning measurements

  3. An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions with Climate Data Record Applications

    Science.gov (United States)

    Kim, Edward

    2011-01-01

    Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201 I. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record-provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica-parameters such as surface temperature.

  4. The use of airborne laser data to calibrate satellite radar altimetry data over ice sheets

    DEFF Research Database (Denmark)

    Ekholm, Simon; Bamber, J.L.; Krabill, W.B.

    2002-01-01

    -correlated noise can be effectively removed by the so-called relocation error correction method. The adjustment, however, produces a different spatial sampling of the data, which introduces a non-negligible slope related bias to the computation of digital elevation models. In this paper we incorporate high......Satellite radar altimetry is the most important data source for ice sheet elevation modeling but it is well established that the accuracy of such data from satellite borne radar altimeters degrade seriously with increasing surface slope and level of roughness. A significant fraction of the slope...... as a linear function of surface slope. This linear correspondence is in turn tested as a model for adjusting the satellite altimetry data for the observed slope correlated bias. The adjustment is shown to have a significant effect in terms of reducing the bias, thus improving the modeling accuracy of the data....

  5. Absolute Radiometric Calibration of the GÖKTÜRK-2 Satellite Sensor Using Tuz GÖLÜ (landnet Site) from Ndvi Perspective

    Science.gov (United States)

    Sakarya, Ufuk; Hakkı Demirhan, İsmail; Seda Deveci, Hüsne; Teke, Mustafa; Demirkesen, Can; Küpçü, Ramazan; Feray Öztoprak, A.; Efendioğlu, Mehmet; Fehmi Şimşek, F.; Berke, Erdinç; Zübeyde Gürbüz, Sevgi

    2016-06-01

    TÜBİTAK UZAY has conducted a research study on the use of space-based satellite resources for several aspects of agriculture. Especially, there are two precision agriculture related projects: HASSAS (Widespread application of sustainable precision agriculture practices in Southeastern Anatolia Project Region (GAP) Project) and AKTAR (Smart Agriculture Feasibility Project). The HASSAS project aims to study development of precision agriculture practice in GAP region. Multi-spectral satellite imagery and aerial hyperspectral data along with ground measurements was collected to analyze data in an information system. AKTAR aims to develop models for irrigation, fertilization and spectral signatures of crops in Inner Anatolia. By the end of the project precision agriculture practices to control irrigation, fertilization, pesticide and estimation of crop yield will be developed. Analyzing the phenology of crops using NDVI is critical for the projects. For this reason, absolute radiometric calibration of the Red and NIR bands in space-based satellite sensors is an important issue. The Göktürk-2 satellite is an earth observation satellite which was designed and built in Turkey and was launched in 2012. The Göktürk-2 satellite sensor has a resolution 2.5 meters in panchromatic and 5 meters in R/G/B/NIR bands. The absolute radiometric calibration of the Göktürk-2 satellite sensor was performed via the ground-based measurements - spectra-radiometer, sun photometer, and meteorological station- in Tuz Gölü cal/val site in 2015. In this paper, the first ground-based absolute radiometric calibration results of the Göktürk-2 satellite sensor using Tuz Gölü is demonstrated. The absolute radiometric calibration results of this paper are compared with the published cross-calibration results of the Göktürk-2 satellite sensor utilizing Landsat 8 imagery. According to the experimental comparison results, the Göktürk-2 satellite sensor coefficients for red and NIR bands

  6. ABSOLUTE RADIOMETRIC CALIBRATION OF THE GÖKTÜRK-2 SATELLITE SENSOR USING TUZ GÖLÜ (LANDNET SITE FROM NDVI PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    U. Sakarya

    2016-06-01

    Full Text Available TÜBİTAK UZAY has conducted a research study on the use of space-based satellite resources for several aspects of agriculture. Especially, there are two precision agriculture related projects: HASSAS (Widespread application of sustainable precision agriculture practices in Southeastern Anatolia Project Region (GAP Project and AKTAR (Smart Agriculture Feasibility Project. The HASSAS project aims to study development of precision agriculture practice in GAP region. Multi-spectral satellite imagery and aerial hyperspectral data along with ground measurements was collected to analyze data in an information system. AKTAR aims to develop models for irrigation, fertilization and spectral signatures of crops in Inner Anatolia. By the end of the project precision agriculture practices to control irrigation, fertilization, pesticide and estimation of crop yield will be developed. Analyzing the phenology of crops using NDVI is critical for the projects. For this reason, absolute radiometric calibration of the Red and NIR bands in space-based satellite sensors is an important issue. The Göktürk-2 satellite is an earth observation satellite which was designed and built in Turkey and was launched in 2012. The Göktürk-2 satellite sensor has a resolution 2.5 meters in panchromatic and 5 meters in R/G/B/NIR bands. The absolute radiometric calibration of the Göktürk-2 satellite sensor was performed via the ground-based measurements - spectra-radiometer, sun photometer, and meteorological station- in Tuz Gölü cal/val site in 2015. In this paper, the first ground-based absolute radiometric calibration results of the Göktürk-2 satellite sensor using Tuz Gölü is demonstrated. The absolute radiometric calibration results of this paper are compared with the published cross-calibration results of the Göktürk-2 satellite sensor utilizing Landsat 8 imagery. According to the experimental comparison results, the Göktürk-2 satellite sensor coefficients for

  7. CARTEL: A method to calibrate S-band ranges with geostationary satellites. Results of orbit determination

    Science.gov (United States)

    Guitart, A.; Mesnard, B.

    1986-05-01

    A satellite tracking campaign was organized, with 4 S-band stations, for 1 wk. The relative geometry of the network with respect to the satellites was an opportunity to show how the most precise orbit can be computed with the operational software. This precise orbit served as a reference to evaluate what can be achieved with one station with range and angular measurements, a typical configuration used for stationkeeping of geostationary satellites. Orbit computation implied numerical integration with gravitational (Earth, Moon, and Sun) and solar radiation pressure forces acting on the satellite. Arc lengths of 2 days gave initial state vectors which were compared every day. Precision of 10 m is achieved. However, an analysis of the influence of parameters in the orbit computations reveals that the absolute accuracy is of the order of 100 m, since modeling perturbations were neglected in the operational software (e.g., polar motion). In a relative sense, the reference orbit allows estimation of systematic errors for other tracking antennas.

  8. Radiometric Cross-Calibration of GF-4 in Multispectral Bands

    Directory of Open Access Journals (Sweden)

    Aixia Yang

    2017-03-01

    Full Text Available The GaoFen-4 (GF-4, launched at the end of December 2015, is China’s first high-resolution geostationary optical satellite. A panchromatic and multispectral sensor (PMS is onboard the GF-4 satellite. Unfortunately, the GF-4 has no onboard calibration assembly, so on-orbit radiometric calibration is required. Like the charge-coupled device (CCD onboard HuanJing-1 (HJ or the wide field of view sensor (WFV onboard GaoFen-1 (GF-1, GF-4 also has a wide field of view, which provides challenges for cross-calibration with narrow field of view sensors, like the Landsat series. A new technique has been developed and used to calibrate HJ-1/CCD and GF-1/WFV, which is verified viable. The technique has three key steps: (1 calculate the surface using the bi-directional reflectance distribution function (BRDF characterization of a site, taking advantage of its uniform surface material and natural topographic variation using Landsat Enhanced Thematic Mapper Plus (ETM+/Operational Land Imager (OLI imagery and digital elevation model (DEM products; (2 calculate the radiance at the top-of-the atmosphere (TOA with the simulated surface reflectance using the atmosphere radiant transfer model; and (3 fit the calibration coefficients with the TOA radiance and corresponding Digital Number (DN values of the image. This study attempts to demonstrate the technique is also feasible to calibrate GF-4 multispectral bands. After fitting the calibration coefficients using the technique, extensive validation is conducted by cross-validation using the image pairs of GF-4/PMS and Landsat-8/OLI with similar transit times and close view zenith. The validation result indicates a higher accuracy and frequency than that given by the China Centre for Resources Satellite Data and Application (CRESDA using vicarious calibration. The study shows that the new technique is also quite feasible for GF-4 multispectral bands as a routine long-term procedure.

  9. Calibration procedures for imaging spectrometers: improving data quality from satellite missions to UAV campaigns

    Science.gov (United States)

    Brachmann, Johannes F. S.; Baumgartner, Andreas; Lenhard, Karim

    2016-10-01

    The Calibration Home Base (CHB) at the Remote Sensing Technology Institute of the German Aerospace Center (DLR-IMF) is an optical laboratory designed for the calibration of imaging spectrometers for the VNIR/SWIR wavelength range. Radiometric, spectral and geometric characterization is realized in the CHB in a precise and highly automated fashion. This allows performing a wide range of time consuming measurements in an efficient way. The implementation of ISO 9001 standards ensures a traceable quality of results. DLR-IMF will support the calibration and characterization campaign of the future German spaceborne hyperspectral imager EnMAP. In the context of this activity, a procedure for the correction of imaging artifacts, such as due to stray light, is currently being developed by DLR-IMF. Goal is the correction of in-band stray light as well as ghost images down to a level of a few digital numbers in the whole wavelength range 420-2450 nm. DLR-IMF owns a Norsk Elektro Optikks HySpex airborne imaging spectrometer system that has been thoroughly characterized. This system will be used to test stray light calibration procedures for EnMAP. Hyperspectral snapshot sensors offer the possibility to simultaneously acquire hyperspectral data in two dimensions. Recently, these rather new spectrometers have arisen much interest in the remote sensing community. Different designs are currently used for local area observation such as by use of small unmanned aerial vehicles (sUAV). In this context the CHB's measurement capabilities are currently extended such that a standard measurement procedure for these new sensors will be implemented.

  10. CARTEL: A method to calibrate S-band ranges with geostationary satellites

    Science.gov (United States)

    Guitart, A.; Mesnard, R.; Nouel, F.

    1986-12-01

    An intersite tracking campaign was organized, with 4 S-band stations, for a period of 1 wk to show how the most precise orbit can be computed with the operational software. This precise orbit served as a reference in order to evaluate what can be achieved with one single station with range and angular measurements (a typical configuration used for stationkeeping of geostationary satellites). Orbit computation implied numerical integration with gravitational (Earth, Moon, and Sun) and solar radiation pressure as forces acting on the satellite. Arc lengths of 2 days gave initial state vectors which were compared every day. A precision of 10 m is achieved. However, an analysis of the influence of several parameters entering the orbit computations reveals that the absolute accuracy is of the order of 100 m, since modeling perturbations were neglected in the operational software (polar motion for example). This reference orbit allows estimation of systematic errors for other tracking antennas.

  11. On the distinction of empathic and vicarious emotions

    OpenAIRE

    Frieder M Paulus; Müller-Pinzler, Laura; Westermann, Stefan; Krach, Sören

    2013-01-01

    In the introduction to the special issue “The Neural Underpinnings of Vicarious Experience” the editors state that one “may feel embarrassed when witnessing another making a social faux pas”. In our commentary we address this statement and ask whether this example introduces a vicarious or an empathic form of embarrassment. We elaborate commonalities and differences between these two forms of emotional experiences and discuss their underlying mechanisms. We suggest that both, vicarious and em...

  12. Enhanced Identification of hydrologic models using streamflow and satellite water storage data: a multi-objective calibration approach

    Science.gov (United States)

    Yassin, F. A.; Razavi, S.; Sapriza, G.; Wheater, H. S.

    2015-12-01

    The conventional procedure for parameter identification of hydrological processes through conditioning only to streamflow data is challenging in physically based distributed hydrologic modelling. The challenge increases for modeling the landscapes where vertical processes dominate horizontal processes, leading to high uncertainties in modelled state variables, vertical fluxes and hence parameter estimates. Such behavior is common in modeling the prairie region of the Saskatchewan River Basin (SaskRB, our case study), Canada, where hydrologic connectivity and vertical fluxes are mainly controlled by surface and sub-surface water storage. To address this challenge, we developed a novel multi-criteria framework that utilizes total column water storage derived from the GRACE satellite, in addition to streamflows. We used a multi-objective optimization algorithm (Borg) and a recently-developed global sensitivity analysis approach (VARS) to effectively identify the model parameters and characterize their significance in model performance. We applied this framework in the calibration of a Land Surface Scheme-Hydrology model, MESH (Modélisation Environmentale Communautaire - Surface and Hydrology) to a sub-watershed of SaskRB. Results showed that the developed framework is superior to the conventional approach of calibration to streamflows. The new framework allowed us to find optimal solutions that effectively constrain the posterior parameter space and are representative of storage and streamflow performance criteria, yielding more credible prediction with reduced uncertainty of modeled storage and evaporation.

  13. An efficient stable optical polariser module for calibration of the S4UVN earth observation satellite

    Science.gov (United States)

    Rolt, Stephen; Calcines, Ariadna; Lomanowski, Bartosz; Bramall, David; Shaw, Benjamin

    2016-07-01

    We describe here an optical polariser module intended to deliver well characterised polarised light to an imaging spectrometer instrument. The instrument in question is the Sentinel-4/UVN Earth observation imaging spectrometer due to be deployed in 2019 in a geostationary orbit. The polariser module described here will be used in the ground based calibration campaign for this instrument. One critical task of the calibration campaign will be the highly accurate characterisation of the polarisation sensitivity of instrument. The polariser module provides a constant, uniform source of linearly polarised light whose direction can be adjusted without changing the output level or uniformity of the illumination. A critical requirement of the polariser module is that the illumination is uniform across the exit pupil. Unfortunately, a conventional Glan-Taylor arrangement cannot provide this uniformity due to the strong variation in transmission at a refractive surface for angles close to the critical angle. Therefore a modified prism arrangement is proposed and this is described in detail. Detailed tolerance modelling and straylight modelling is also reported here.

  14. Vicarious resilience in sexual assault and domestic violence advocates.

    Science.gov (United States)

    Frey, Lisa L; Beesley, Denise; Abbott, Deah; Kendrick, Elizabeth

    2017-01-01

    There is little research related to sexual assault and domestic violence advocates' experiences, with the bulk of the literature focused on stressors and systemic barriers that negatively impact efforts to assist survivors. However, advocates participating in these studies have also emphasized the positive impact they experience consequent to their work. This study explores the positive impact. Vicarious resilience, personal trauma experiences, peer relational quality, and perceived organizational support in advocates (n = 222) are examined. Also, overlap among the conceptual components of vicarious resilience is explored. The first set of multiple regressions showed that personal trauma experiences and peer relational health predicted compassion satisfaction and vicarious posttraumatic growth, with organizational support predicting only compassion satisfaction. The second set of multiple regressions showed that (a) there was significant shared variance between vicarious posttraumatic growth and compassion satisfaction; (b) after accounting for vicarious posttraumatic growth, organizational support accounted for significant variance in compassion satisfaction; and (c) after accounting for compassion satisfaction, peer relational health accounted for significant variance in vicarious posttraumatic growth. Results suggest that it may be more meaningful to conceptualize advocates' personal growth related to their work through the lens of a multidimensional construct such as vicarious resilience. Organizational strategies promoting vicarious resilience (e.g., shared organizational power, training components) are offered, and the value to trauma-informed care of fostering advocates' vicarious resilience is discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  15. On-orbit geometric calibration and geometric quality assessment for the high-resolution geostationary optical satellite GaoFen4

    Science.gov (United States)

    Wang, Mi; Cheng, Yufeng; Chang, Xueli; Jin, Shuying; Zhu, Ying

    2017-03-01

    The Chinese GaoFen4 (GF4) remote sensing satellite, launched at the end of December 2015, is China's first civilian high-resolution geostationary optical satellite and has the world's highest resolution from geostationary orbit. High accuracy geometric calibration is the key factor in the geometrical quality of satellite imagery. This paper proposes an on-orbit geometric calibration approach for the high-resolution geostationary optical satellite GF4 in which a stepwise calibration is performed, external parameters are estimated, and internal parameters are then estimated in a generalized camera frame determined by external parameters. First, the correlation of the imaging error sources and the rigorous imaging model of GF4 are introduced. Second, the geometric calibration model based on the two-dimensional detector directional angle and the parameters estimation method for the planar array camera are presented. LandSat 8 digital orthophoto maps (DOM) and GDEM2 digital elevation models (DEM) are used to validate the efficiency of the proposed method and to make a geometric quality assessment of GF4. The results indicate that changing imaging time and imaging area will dramatically affect the absolute positioning accuracy because of the change of the camera's installation angles caused by thermal environment changes around the satellite in a high orbit. After calibration, the internal distortion is well-compensated, and the positioning accuracy with relatively few ground control points (GCPs) is demonstrated to be better than 1.0 pixels for both the panchromatic and near-infrared sensor and the intermediate infrared sensor.

  16. GPS Survey of the salar de Uyuni, Bolivia, for Satellite Altimeter Calibration

    Science.gov (United States)

    Borsa, A. A.; Fricker, H. A.; Bills, B. G.; Carabajal, C. C.; Quinn, K.; Minster, J. B.; Schutz, B.

    2002-12-01

    The salar de Uyuni, a 100km x 100km salt flat in the Andean Altiplano of southern Bolivia, is the largest dry lake on Earth. The size, high albedo and remarkable flatness of the salar make it an ideal reference surface for satellite-based altimeters - in particular, the Geoscience Laser Altimeter System (GLAS) to be flown on the Ice, Cloud and Land Elevation Satellite (ICESat) - especially with regard to range measurements and waveform analysis of return signals. A simple reference surface such as the salar can be mapped by ground-based surveying, although the sheer size of the area requires adaptations to standard survey techniques. We describe a survey of the salar de Uyuni carried out with car-mounted kinematic GPS over a seven-day period in September 2002. We divided the salar surface into a number of survey grids that were driven in multiple directions to yield redundant measurements and corresponding error statistics at grid crossover points. Adjacent grids were overlapped so we could also determine errors between grids and over multi-day time periods. In addition, we set up five fixed GPS sites on the salar to serve as local survey control in post-processing. These fixed sites will be used to map ionospheric effects and interpolate them to the roving GPS receivers. If successful, this will allow reprocessing of GPS solutions using L1 data only, with a corresponding reduction in noise compared to solutions using the standard ionosphere-free LC combination. We present our surveyed topography of the eastern half of the salar de Uyuni, comparing it to previously-published elevation measurements and to the best geoid model available for the region. We show the close relationship between the topography of the salar and the shape of the geoid, a result we had expected since the salar is flooded each austral summer to an almost uniform depth. We also demonstrate knowledge of the surface height of the salar to within the measurement error specified for the GLAS

  17. Telling Disability: Identity Construction in Personal and Vicarious Narratives

    Science.gov (United States)

    Cochrane, Leslie Elizabeth

    2014-01-01

    This study examines the construction of disability identities in personal and vicarious narratives. Sociolinguistic research on narrative focuses largely on personal narrative (Schiffrin 1996); some studies claim that vicarious narratives lack coherence and evaluation (Labov and Waletzky 1967; Chafe 1994) and have no natural relation to the…

  18. Exploring School Counselors' Perceptions of Vicarious Trauma: A Qualitative Study

    Science.gov (United States)

    Parker, Mashone; Henfield, Malik S.

    2012-01-01

    The purpose of this qualitative study was to examine school counselors' perceptions of vicarious trauma. Consensual qualitative research (CQR) methodology was used. Six school counselors were interviewed. Three primary domains emerged from the data: (a) ambiguous vicarious trauma, (b) support system significance, and (c) importance of level of…

  19. Andean uplift promotes lowland speciation through vicariance and dispersal in Dendrocincla woodcreepers.

    Science.gov (United States)

    Weir, Jason T; Price, Momoko

    2011-11-01

    Andean uplift contributed importantly to the build-up of high Neotropical diversity. Final uplift of the Eastern Cordillera of Colombia separated once-contiguous lowland faunas east and west of the Andes between 5 and 3.5 million years ago (Ma hereafter). We used DNA sequences from several moderate- to fast-evolving mitochondrial and two slow-evolving nuclear genes to generate a well-supported phylogeny of Dendrocincla woodcreepers, a genus with multiple species endemic to lowland regions both east and west of the Andes. A time-calibrated phylogeny and dispersal-vicariance analysis indicated that uplift of the Eastern Cordillera of Colombia resulted in the initial vicariant separation of a widespread lowland form east and west of the Andes at c. 3.6 Ma. This was followed by two separate east-to-west dispersal events over or around the completed Andes, each producing a genetically distinct lineage. Our analysis suggests that Andean uplift promoted the build-up of biodiversity in lowland Neotropical faunas both through vicariance-based speciation during uplift and through dispersal-based speciation following uplift. In contrast to the multiple colonizations of the trans-Andean region by Dendrocincla, the Atlantic Forest was colonized from the Amazon only once, followed by in situ diversification.

  20. Radiometric Cross-Calibration of the Chilean Satellite FASat-C Using RapidEye and EO-1 Hyperion Data and a Simultaneous Nadir Overpass Approach

    Directory of Open Access Journals (Sweden)

    Carolina Barrientos

    2016-07-01

    Full Text Available The absolute radiometric calibration of a satellite sensor is the critical factor that ensures the usefulness of the acquired data for quantitative applications on remote sensing. This work presents the results of the first cross-calibration of the sensor on board the Sistema Satelital de Observación de la Tierra (SSOT Chilean satellite or Air Force Satellite FASat-C. RapidEye-MSI was chosen as the reference sensor, and a simultaneous Nadir Overpass Approach (SNO was applied. The biases caused by differences in the spectral responses of both instruments were compensated through an adjustment factor derived from EO-1 Hyperion data. Through this method, the variations affecting the radiometric response of New AstroSat Optical Modular Instrument (NAOMI-1, have been corrected based on collections over the Frenchman Flat calibration site. The results of a preliminary evaluation of the pre-flight and updated coefficients have shown a significant improvement in the accuracy of at-sensor radiances and TOA reflectances: an average agreement of 2.63% (RMSE was achieved for the multispectral bands of both instruments. This research will provide a basis for the continuity of calibration and validation tasks of future Chilean space missions.

  1. Vicarious learning through capturing taskdirected discussions

    Directory of Open Access Journals (Sweden)

    F. Dineen

    1999-12-01

    Full Text Available The research programme on vicarious learning, part of which we report in this paper, has been aimed at exploring the idea that learning can be facilitated by providing learners with access to the experiences of other learners. We use Bandura's term vicarious learning to describe this (Bandura, 1986, and we believe it to be a paradigm that offers particular promise when seen as an innovative way of exploiting recent technical advances in multimedia and distance learning technologies. It offers the prospect of a real alternative to the building of intelligent tutors (which directly address the problem of allowing learners access to dialogue, but which have proved largely intractable in practice or to the direct support of live dialogues (which do not offer a solution to the problem of providing 'live' tutors - unless they are between peer learners. In the research reported here our main objectives were to develop techniques to facilitate learners' access to, especially, dialogues and discussions which have arisen when other learners were faced with similar issues or problems in understanding the material. This required us to investigate means of indexing and retrieving appropriate dialogues and build on these to create an advanced prototype system for use in educational settings.

  2. A functional analysis of social reinforcement in vicarious verbal conditioning.

    Science.gov (United States)

    Donohue, G B; Tryon, W W

    1985-01-01

    This article reports the results of 629 subjects in three experiments designed to replicate and extend the phenomenon of vicarious verbal conditioning. Experiment I replicated the finding that subjects who responded most to vicarious verbal conditioning were aware of the contingency involved. Experiment II attempted to examine the effects of prior history with the verbal reinforcer on vicarious verbal conditioning by providing seven groups of subjects with varying classic conditioning histories prior to vicarious verbal conditioning. The null results associated with this experiment were hypothesized to be due to the fact that the vicarious verbal conditioning took place in a language laboratory where the subjects could hear but not see the model. Experiment III replicated Experiment II in a live group context as was done in Experiment I. The results showed that vicarious verbal conditioning was again found to take place, that associating the verbal reinforcer with a tone or tone plus money via forward classic conditioning potentiated the effects of the verbal reinforcer, that backward classic conditioning did not potentiate the reinforcer, d) nor did either of two sensitization procedures potentiate the effects of the verbal reinforcer. Both aware and unaware subjects evidenced vicarious verbal conditioning.

  3. VICARIOUS TRAUMA PADA RELAWAN BENCANA ALAM

    Directory of Open Access Journals (Sweden)

    Erlina Listyanti Widuri

    2012-03-01

    Full Text Available The purpose of this study was to determine the symptoms of vicarioustrauma and its impact in the lives of volunteers, the factors that causevicarious trauma and expectations for volunteers and government agencies.This study used qualitative research method based on phenomenology asit can reveal the meaning of an event. Based on the analysis result throughinterviews and observation, showed that volunteers who returned fromduty experience vicarious trauma as a result of interaction with multipletrauma victims. There are two main factors causing the occurrence ofvicarious trauma on volunteers are internal factors and external factors.Internal factors include the characteristics (personality and adversity thatare owned by volunteers and how they performance it. External factorsare type of victim, the social environment and work climate with all kindsof problems.

  4. Vicarious Audiovisual Learning in Perfusion Education

    Science.gov (United States)

    Rath, Thomas E.; Holt, David W.

    2010-01-01

    Abstract: Perfusion technology is a mechanical and visual science traditionally taught with didactic instruction combined with clinical experience. It is difficult to provide perfusion students the opportunity to experience difficult clinical situations, set up complex perfusion equipment, or observe corrective measures taken during catastrophic events because of patient safety concerns. Although high fidelity simulators offer exciting opportunities for future perfusion training, we explore the use of a less costly low fidelity form of simulation instruction, vicarious audiovisual learning. Two low fidelity modes of instruction; description with text and a vicarious, first person audiovisual production depicting the same content were compared. Students (n = 37) sampled from five North American perfusion schools were prospectively randomized to one of two online learning modules, text or video. These modules described the setup and operation of the MAQUET ROTAFLOW standalone centrifugal console and pump. Using a 10 question multiple-choice test, students were assessed immediately after viewing the module (test #1) and then again 2 weeks later (test #2) to determine cognition and recall of the module content. In addition, students completed a questionnaire assessing the learning preferences of today’s perfusion student. Mean test scores from test #1 for video learners (n = 18) were significantly higher (88.89%) than for text learners (n = 19) (74.74%), (p perfusion training on subjects such as equipment setup and operation. Video learning appears to improve cognition and retention of learned content and may play an important role in how we teach perfusion in the future, as simulation technology becomes more prevalent. PMID:21313929

  5. Vicarious reinforcement learning signals when instructing others.

    Science.gov (United States)

    Apps, Matthew A J; Lesage, Elise; Ramnani, Narender

    2015-02-18

    Reinforcement learning (RL) theory posits that learning is driven by discrepancies between the predicted and actual outcomes of actions (prediction errors [PEs]). In social environments, learning is often guided by similar RL mechanisms. For example, teachers monitor the actions of students and provide feedback to them. This feedback evokes PEs in students that guide their learning. We report the first study that investigates the neural mechanisms that underpin RL signals in the brain of a teacher. Neurons in the anterior cingulate cortex (ACC) signal PEs when learning from the outcomes of one's own actions but also signal information when outcomes are received by others. Does a teacher's ACC signal PEs when monitoring a student's learning? Using fMRI, we studied brain activity in human subjects (teachers) as they taught a confederate (student) action-outcome associations by providing positive or negative feedback. We examined activity time-locked to the students' responses, when teachers infer student predictions and know actual outcomes. We fitted a RL-based computational model to the behavior of the student to characterize their learning, and examined whether a teacher's ACC signals when a student's predictions are wrong. In line with our hypothesis, activity in the teacher's ACC covaried with the PE values in the model. Additionally, activity in the teacher's insula and ventromedial prefrontal cortex covaried with the predicted value according to the student. Our findings highlight that the ACC signals PEs vicariously for others' erroneous predictions, when monitoring and instructing their learning. These results suggest that RL mechanisms, processed vicariously, may underpin and facilitate teaching behaviors.

  6. Development of landsat-5 thematic mapper internal calibrator gain and offset table

    Science.gov (United States)

    Barsi, J.A.; Chander, G.; Micijevic, E.; Markham, B.L.; Haque, Md. O.

    2008-01-01

    The National Landsat Archive Production System (NLAPS) has been the primary processing system for Landsat data since U.S. Geological Survey (USGS) Earth Resources Observation and Science Center (EROS) started archiving Landsat data. NLAPS converts raw satellite data into radiometrically and geometrically calibrated products. NLAPS has historically used the Internal Calibrator (IC) to calibrate the reflective bands of the Landsat-5 Thematic Mapper (TM), even though the lamps in the IC were less stable than the TM detectors, as evidenced by vicarious calibration results. In 2003, a major effort was made to model the actual TM gain change and to update NLAPS to use this model rather than the unstable IC data for radiometric calibration. The model coefficients were revised in 2007 to reflect greater understanding of the changes in the TM responsivity. While the calibration updates are important to users with recently processed data, the processing system no longer calculates the original IC gain or offset. For specific applications, it is useful to have a record of the gain and offset actually applied to the older data. Thus, the NLAPS calibration database was used to generate estimated daily values for the radiometric gain and offset that might have been applied to TM data. This paper discusses the need for and generation of the NLAPSIC gain and offset tables. A companion paper covers the application of and errors associated with using these tables.

  7. Gavdos/West Crete Cal-Val Site: Over a Decade Calibrations for Jason Series, SARAL/AltiKa, Cryosat-2, Sentinel-3 and Hy-2 Altimeter Satellites

    Science.gov (United States)

    Mertikas, Stelios; DonLon, Craig; Mavrochordatos, Constantin; Tziavos, Ilias; Galanakis, Demitris; Vergos, George; Baltazar Andersen, Ole; Tripolitsiotis, Achilles; Frantzis, Xenofon; Lin, Mingsen; Qiao, Fangli

    2016-08-01

    This work presents and compares the latest altimeter calibration results for Jason series, the SARAL/AltiKa the Chinese HY-2 missions and the ESA missions of CryoSat-2 and Sentinel-3, conducted at the Gavdos/Crete calibration/validation facilities. At first, the Jason altimeter calibration values will be given for the ascending Pass No.109 and the descending Pass No.18, based on the GDR-E (Jason-1), GDR-D (Jason- 2) and GDR-T (Jason-3) products. Secondly, these values will be cross-examined against the altimeter bias for the SARAL/AltiKa (GDR-T) satellite at Gavdos Cal/Val using its reference ascending orbit No. 571. The Chinese HY-2 satellite altimeter bias will be presented using the CRS1 permanent site in southwest Crete for the descending HY-2 Pass No. 280, at 20 Hz based on SGDR data products. Finally, values will be compared against the Sentinel-3 altimeter. Additionally, altimeter biases as determined by locally developed Mean Sea Surface models, will be presented and compared with the conventional sea-surface calibration methodology.

  8. Inter-Calibration of Satellite Passive Microwave Land Observations from AMSR-E and AMSR2 Using Overlapping FY3B-MWRI Sensor Measurements

    Directory of Open Access Journals (Sweden)

    Jinyang Du

    2014-09-01

    Full Text Available The development and continuity of consistent long-term data records from similar overlapping satellite observations is critical for global monitoring and environmental change assessments. We developed an empirical approach for inter-calibration of satellite microwave brightness temperature (Tb records over land from the Advanced Microwave Scanning Radiometer for EOS (AMSR-E and Microwave Scanning Radiometer 2 (AMSR2 using overlapping Tb observations from the Microwave Radiation Imager (MWRI. Double Differencing (DD calculations revealed significant AMSR2 and MWRI biases relative to AMSR-E. Pixel-wise linear relationships were established from overlapping Tb records and used for calibrating MWRI and AMSR2 records to the AMSR-E baseline. The integrated multi-sensor Tb record was largely consistent over the major global vegetation and climate zones; sensor biases were generally well calibrated, though residual Tb differences inherent to different sensor configurations were still present. Daily surface air temperature estimates from the calibrated AMSR2 Tb inputs also showed favorable accuracy against independent measurements from 142 global weather stations (R2 ≥ 0.75, RMSE ≤ 3.64 °C, but with slightly lower accuracy than the AMSR-E baseline (R2 ≥ 0.78, RMSE ≤ 3.46 °C. The proposed method is promising for generating consistent, uninterrupted global land parameter records spanning the AMSR-E and continuing AMSR2 missions.

  9. Effects of vicarious punishment: a meta-analysis.

    Science.gov (United States)

    Malouff, John; Thorsteinsson, Einar; Schutte, Nicola; Rooke, Sally Erin

    2009-07-01

    Vicarious punishment involves observing a model exhibit a behavior that leads to punishment for the model. If observers then exhibit the behavior at a lower rate than do individuals in a control group, vicarious punishment occurred. The authors report the results of a meta-analysis of studies that tested for vicarious-punishment effects. Across 21 research samples and 876 participants, the viewing of a model experiencing punishment for a behavior led to a significantly lower level of the behavior by the observers, d = 0.58. Vicarious punishment occurred consistently with (a) live and filmed models, (b) severe and nonsevere punishment for the model, (c) positive punishment alone or positive plus negative punishment, (d) various types of behavior, (e) adults and children, and (f) male and female participants. The findings have implications for the use of models in reducing undesirable behavior.

  10. Engineering implementation of satellite calibration for radar%雷达卫星标校的工程实现研究

    Institute of Scientific and Technical Information of China (English)

    郭佳意; 钮俊清

    2014-01-01

    为确保雷达系统的测量精度,给出了一种用于标校雷达动态跟踪过程中系统误差的工程实现方法--卫星标校法。该方法通过观测卫星轨迹,将量测值与真实星历值比对,通过最优化解法标定雷达的系统误差。考虑雷达结构特点导致的误差和大气折射误差修正后的残余误差,建立了卫星标校的系统误差模型。最后,采用实测数据验证了该误差模型的可行性与可靠性。该方法在标校过程中不受人为、天气等因素影响,可以适应雷达的动态技术状态。%To guarantee the measurement precision of radar system, this paper presents an engineering implementation method, named satellite calibration, used for calibrating the system error in the course of radar dynamic tracking. This method contrasts the measurement value to the real ephemeris value by observing the satellite track, and calibrate the radar’s system errors by using the optimal solution. Considering that the errors caused by the features of radar configuration and the residual errors after correction of atmosphere refraction errors, the author sets up a system error model for satellite calibration, and finally proves the feasibility and reliability of this proposed error model using the test data. As this method is not affected by some factitious and weather factors, it can be also adapted to radar’s dynamic technical state.

  11. Estimating daily time series of streamflow using hydrological model calibrated based on satellite observations of river water surface width: Toward real world applications.

    Science.gov (United States)

    Sun, Wenchao; Ishidaira, Hiroshi; Bastola, Satish; Yu, Jingshan

    2015-05-01

    Lacking observation data for calibration constrains applications of hydrological models to estimate daily time series of streamflow. Recent improvements in remote sensing enable detection of river water-surface width from satellite observations, making possible the tracking of streamflow from space. In this study, a method calibrating hydrological models using river width derived from remote sensing is demonstrated through application to the ungauged Irrawaddy Basin in Myanmar. Generalized likelihood uncertainty estimation (GLUE) is selected as a tool for automatic calibration and uncertainty analysis. Of 50,000 randomly generated parameter sets, 997 are identified as behavioral, based on comparing model simulation with satellite observations. The uncertainty band of streamflow simulation can span most of 10-year average monthly observed streamflow for moderate and high flow conditions. Nash-Sutcliffe efficiency is 95.7% for the simulated streamflow at the 50% quantile. These results indicate that application to the target basin is generally successful. Beyond evaluating the method in a basin lacking streamflow data, difficulties and possible solutions for applications in the real world are addressed to promote future use of the proposed method in more ungauged basins. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  12. Pre-Launch Absolute Calibration of CCD/CBERS-2B Sensor

    Science.gov (United States)

    Ponzoni, Flávio Jorge; Albuquerque, Bráulio Fonseca Carneiro

    2008-01-01

    Pre-launch absolute calibration coefficients for the CCD/CBERS-2B sensor have been calculated from radiometric measurements performed in a satellite integration and test hall in the Chinese Academy of Space Technology (CAST) headquarters, located in Beijing, China. An illuminated integrating sphere was positioned in the test hall facilities to allow the CCD/CBERS-2B imagery of the entire sphere aperture. Calibration images were recorded and a relative calibration procedure adopted exclusively in Brazil was applied to equalize the detectors responses. Averages of digital numbers (DN) from these images were determined and correlated to their respective radiance levels in order to calculate the absolute calibration coefficients. It has been the first time these pre-launch absolute calibration coefficients have been calculated considering the Brazilian image processing criteria. Now it will be possible to compare them to those that will be calculated from vicarious calibration campaigns. This comparison will permit the CCD/CBERS-2B monitoring and the frequently data updating to the user community. PMID:27873886

  13. Absolute Radiometric Calibration of KOMPSAT-3A

    Science.gov (United States)

    Ahn, H. Y.; Shin, D. Y.; Kim, J. S.; Seo, D. C.; Choi, C. U.

    2016-06-01

    This paper presents a vicarious radiometric calibration of the Korea Multi-Purpose Satellite-3A (KOMPSAT-3A) performed by the Korea Aerospace Research Institute (KARI) and the Pukyong National University Remote Sensing Group (PKNU RSG) in 2015.The primary stages of this study are summarized as follows: (1) A field campaign to determine radiometric calibrated target fields was undertaken in Mongolia and South Korea. Surface reflectance data obtained in the campaign were input to a radiative transfer code that predicted at-sensor radiance. Through this process, equations and parameters were derived for the KOMPSAT-3A sensor to enable the conversion of calibrated DN to physical units, such as at-sensor radiance or TOA reflectance. (2) To validate the absolute calibration coefficients for the KOMPSAT-3A sensor, we performed a radiometric validation with a comparison of KOMPSAT-3A and Landsat-8 TOA reflectance using one of the six PICS (Libya 4). Correlations between top-of-atmosphere (TOA) radiances and the spectral band responses of the KOMPSAT-3A sensors at the Zuunmod, Mongolia and Goheung, South Korea sites were significant for multispectral bands. The average difference in TOA reflectance between KOMPSAT-3A and Landsat-8 image over the Libya 4, Libya site in the red-green-blue (RGB) region was under 3%, whereas in the NIR band, the TOA reflectance of KOMPSAT-3A was lower than the that of Landsat-8 due to the difference in the band passes of two sensors. The KOMPSAT-3Aensor includes a band pass near 940 nm that can be strongly absorbed by water vapor and therefore displayed low reflectance. Toovercome this, we need to undertake a detailed analysis using rescale methods, such as the spectral bandwidth adjustment factor.

  14. HYDROGRAV - Hydrological model calibration and terrestrial water storage monitoring from GRACE gravimetry and satellite altimetry, First results

    DEFF Research Database (Denmark)

    Andersen, O.B.; Krogh, P.E.; Michailovsky, C.

    2008-01-01

    Space-borne and ground-based time-lapse gravity observations provide new data for water balance monitoring and hydrological model calibration in the future. The HYDROGRAV project (www.hydrograv.dk) will explore the utility of time-lapse gravity surveys for hydrological model calibration and terre...

  15. Vicarious experience affects patients' treatment preferences for depression.

    Directory of Open Access Journals (Sweden)

    Seth A Berkowitz

    Full Text Available PURPOSE: Depression is common in primary care but often under-treated. Personal experiences with depression can affect adherence to therapy, but the effect of vicarious experience is unstudied. We sought to evaluate the association between a patient's vicarious experiences with depression (those of friends or family and treatment preferences for depressive symptoms. METHODS: We sampled 1054 English and/or Spanish speaking adult subjects from July through December 2008, randomly selected from the 2008 California Behavioral Risk Factor Survey System, regarding depressive symptoms and treatment preferences. We then constructed a unidimensional scale using item analysis that reflects attitudes about antidepressant pharmacotherapy. This became the dependent variable in linear regression analyses to examine the association between vicarious experiences and treatment preferences for depressive symptoms. RESULTS: Our sample was 68% female, 91% white, and 13% Hispanic. Age ranged from 18-94 years. Mean PHQ-9 score was 4.3; 14.5% of respondents had a PHQ-9 score >9.0, consistent with active depressive symptoms. Analyses controlling for current depression symptoms and socio-demographic factors found that in patients both with (coefficient 1.08, p = 0.03 and without (coefficient 0.77, p = 0.03 a personal history of depression, having a vicarious experience (family and friend, respectively with depression is associated with a more favorable attitude towards antidepressant medications. CONCLUSIONS: Patients with vicarious experiences of depression express more acceptance of pharmacotherapy. Conversely, patients lacking vicarious experiences of depression have more negative attitudes towards antidepressants. When discussing treatment with patients, clinicians should inquire about vicarious experiences of depression. This information may identify patients at greater risk for non-adherence and lead to more tailored patient-specific education about

  16. Vicarious resilience and vicarious traumatisation: Experiences of working with refugees and asylum seekers in South Australia.

    Science.gov (United States)

    Puvimanasinghe, Teresa; Denson, Linley A; Augoustinos, Martha; Somasundaram, Daya

    2015-12-01

    The negative psychological impacts of working with traumatised people are well documented and include vicarious traumatisation (VT): the cumulative effect of identifying with clients' trauma stories that negatively impacts on service providers' memory, emotions, thoughts, and worldviews. More recently, the concept of vicarious resilience (VR) has been also identified: the strength, growth, and empowerment experienced by trauma workers as a consequence of their work. VR includes service providers' awareness and appreciation of their clients' capacity to grow, maintaining hope for change, as well as learning from and reassessing personal problems in the light of clients' stories of perseverance, strength, and growth. This study aimed at exploring the experiences of mental health, physical healthcare, and settlement workers caring for refugees and asylum seekers in South Australia. Using a qualitative method (data-based thematic analysis) to collect and analyse 26 semi-structured face-to-face interviews, we identified four prominent and recurring themes emanating from the data: VT, VR, work satisfaction, and cultural flexibility. These findings-among the first to describe both VT and VR in Australians working with refugee people-have important implications for policy, service quality, service providers' wellbeing, and refugee clients' lives. © The Author(s) 2015.

  17. Assessment of the calibration performance of satellite visible channels using cloud targets: application to Meteosat-8/9 and MTSAT-1R

    Science.gov (United States)

    Ham, S.-H.; Sohn, B. J.

    2010-11-01

    To examine the calibration performance of the Meteosat-8/9 Spinning Enhanced Visible Infra-Red Imager (SEVIRI) 0.640-μm and the Multi-functional Transport Satellite (MTSAT)-1R 0.724-μm channels, three calibration methods are employed. Total eight months during the 2004-2007 period are used for SEVIRI, and total seven months during the 2007-2008 period are used for MTSAT-1R. First, a ray-matching technique is used to compare Meteosat-8/9 and MTSAT-1R visible channel reflectances with the well-calibrated Moderate Resolution Imaging Spectroradiometer (MODIS) 0.646-μm channel reflectances. Spectral differences of the response function between the two channels of interest are taken into account for the comparison. Second, collocated MODIS cloud products are used as inputs to a radiative transfer model (RTM) to calculate Meteosat-8/9 and MTSAT-1R visible channel reflectances. In the simulation, cloud three-dimensional (3-D) radiative effect associated with subgrid variations is taken into account using the lognormal-independent column approximation (LN-ICA) to minimize the simulation bias caused by the plane-parallel homogeneous assumption. Third, an independent method uses the typical optical properties of deep convective clouds (DCCs) to simulate reflectances of selected DCC targets. Although all three methods are not in perfect agreement, the results suggest that calibration coefficients of Meteosat-8/9 0.640-μm channels are underestimated by 6-7%. On the other hand, the calibration accuracy of MTSAT-1R visible channel appears to be variable with the target reflectance itself because of an underestimate of calibration coefficient (up to 20%) and a non-zero space offset. The results further suggest that the solar channel calibration scheme combining the three methods in this paper can be used as a tool to monitor the calibration performance of visible sensors that are particularly not equipped with an onboard calibration system.

  18. Your flaws are my pain: linking empathy to vicarious embarrassment.

    Directory of Open Access Journals (Sweden)

    Sören Krach

    Full Text Available People vicariously experience embarrassment when observing others' public pratfalls or etiquette violations. In two consecutive studies we investigated the subjective experience and the neural correlates of vicarious embarrassment for others in a broad range of situations. We demonstrated, first, that vicarious embarrassment was experienced regardless of whether the observed protagonist acted accidentally or intentionally and was aware or unaware that he/she was in an embarrassing situation. Second, using functional magnetic resonance imaging (fMRI, we showed that the anterior cingulate cortex and the left anterior insula, two cortical structures typically involved in vicarious feelings of others' pain, are also strongly implicated in experiencing the 'social pain' for others' flaws and pratfalls. This holds true even for situations that engage protagonists not aware of their current predicament. Importantly, the activity in the anterior cingulate cortex and the left anterior insula positively correlated with individual differences in trait empathy. The present findings establish the empathic process as a fundamental prerequisite for vicarious embarrassment experiences, thus connecting affect and cognition to interpersonal processes."When we are living with people who have a delicate sense of propriety, we are in misery on their account when anything unbecoming is committed. So I always feel for and with Charlotte when a person is tipping his chair. She cannot endure it." [Elective Affinities, J. W. Goethe].

  19. Explaining Self and Vicarious Reactance: A Process Model Approach.

    Science.gov (United States)

    Sittenthaler, Sandra; Jonas, Eva; Traut-Mattausch, Eva

    2016-04-01

    Research shows that people experience a motivational state of agitation known as reactance when they perceive restrictions to their freedoms. However, research has yet to show whether people experience reactance if they merely observe the restriction of another person's freedom. In Study 1, we activated realistic vicarious reactance in the laboratory. In Study 2, we compared people's responses with their own and others' restrictions and found the same levels of experienced reactance and behavioral intentions as well as aggressive tendencies. We did, however, find differences in physiological arousal: Physiological arousal increased quickly after participants imagined their own freedom being restricted, but arousal in response to imagining a friend's freedom being threatened was weaker and delayed. In line with the physiological data, Study 3's results showed that self-restrictions aroused more emotional thoughts than vicarious restrictions, which induced more cognitive responses. Furthermore, in Study 4a, a cognitive task affected only the cognitive process behind vicarious reactance. In contrast, in Study 4b, an emotional task affected self-reactance but not vicarious reactance. We propose a process model explaining the emotional and cognitive processes of self- and vicarious reactance.

  20. Satellite Instrument Calibration for Measuring Global Climate Change. Report of a Workshop at the University of Maryland Inn and Conference Center, College Park, MD. , November 12-14, 2002

    Science.gov (United States)

    Ohring, G.; Wielicki, B.; Spencer, R.; Emery, B.; Datla, R.

    2004-01-01

    Measuring the small changes associated with long-term global climate change from space is a daunting task. To address these problems and recommend directions for improvements in satellite instrument calibration some 75 scientists, including researchers who develop and analyze long-term data sets from satellites, experts in the field of satellite instrument calibration, and physicists working on state of the art calibration sources and standards met November 12 - 14, 2002 and discussed the issues. The workshop defined the absolute accuracies and long-term stabilities of global climate data sets that are needed to detect expected trends, translated these data set accuracies and stabilities to required satellite instrument accuracies and stabilities, and evaluated the ability of current observing systems to meet these requirements. The workshop's recommendations include a set of basic axioms or overarching principles that must guide high quality climate observations in general, and a roadmap for improving satellite instrument characterization, calibration, inter-calibration, and associated activities to meet the challenge of measuring global climate change. It is also recommended that a follow-up workshop be conducted to discuss implementation of the roadmap developed at this workshop.

  1. Satellite Instrument Calibration for Measuring Global Climate Change. Report of a Workshop at the University of Maryland Inn and Conference Center, College Park, MD. , November 12-14, 2002

    Science.gov (United States)

    Ohring, G.; Wielicki, B.; Spencer, R.; Emery, B.; Datla, R.

    2004-01-01

    Measuring the small changes associated with long-term global climate change from space is a daunting task. To address these problems and recommend directions for improvements in satellite instrument calibration some 75 scientists, including researchers who develop and analyze long-term data sets from satellites, experts in the field of satellite instrument calibration, and physicists working on state of the art calibration sources and standards met November 12 - 14, 2002 and discussed the issues. The workshop defined the absolute accuracies and long-term stabilities of global climate data sets that are needed to detect expected trends, translated these data set accuracies and stabilities to required satellite instrument accuracies and stabilities, and evaluated the ability of current observing systems to meet these requirements. The workshop's recommendations include a set of basic axioms or overarching principles that must guide high quality climate observations in general, and a roadmap for improving satellite instrument characterization, calibration, inter-calibration, and associated activities to meet the challenge of measuring global climate change. It is also recommended that a follow-up workshop be conducted to discuss implementation of the roadmap developed at this workshop.

  2. Experimental evaluation of self-calibrating cavity radiometers for use in earth flux radiation balance measurements from satellites

    Science.gov (United States)

    Hickey, J. R.; Karoli, A. R.; Alton, B. M.

    1982-01-01

    A method for evaluating out-of-field response of wide-field, earth-viewing satellite radiometers is described. The equipment which simulates the earth and space consists of a central blackbody surrounded by a cooled ring. The radiometric and orbital considerations are discussed. Some test results for prototype ERBE cavity sensors are included. This presentation is restricted to longwave radiative transfer

  3. Expanding the mirror : vicarious activity for actions, emotions, and sensations

    NARCIS (Netherlands)

    Keysers, Christian; Gazzola, Valeria

    2009-01-01

    We often empathically share the states of others. The discovery of 'mirror neurons' suggested a neural mechanism for monkeys to share the actions of others. Here we expand this view by showing that mirror neurons for actions not only exist in the premotor cortex or in monkeys and that vicarious acti

  4. Promoting Vicarious Learning of Physics Using Deep Questions with Explanations

    Science.gov (United States)

    Craig, Scotty D.; Gholson, Barry; Brittingham, Joshua K.; Williams, Joah L.; Shubeck, Keith T.

    2012-01-01

    Two experiments explored the role of vicarious "self" explanations in facilitating student learning gains during computer-presented instruction. In Exp. 1, college students with low or high knowledge on Newton's laws were tested in four conditions: (a) monologue (M), (b) questions (Q), (c) explanation (E), and (d) question + explanation (Q + E).…

  5. An Examination of Vicarious Reinforcement Processes in Children.

    Science.gov (United States)

    Ollendick, Thomas H.; Shapiro, Edward S.

    1984-01-01

    Explores effects on one child of observing another same-sex child receive direct reinforcement. Subjects were 216 children from different age levels (6.11, 9.1, and 11.2 years). Results were considered in terms of vicarious reinforcement and the "implicit punishment" hypothesis. (Author/CI)

  6. Expanding the mirror : vicarious activity for actions, emotions, and sensations

    NARCIS (Netherlands)

    Keysers, Christian; Gazzola, Valeria

    2009-01-01

    We often empathically share the states of others. The discovery of 'mirror neurons' suggested a neural mechanism for monkeys to share the actions of others. Here we expand this view by showing that mirror neurons for actions not only exist in the premotor cortex or in monkeys and that vicarious

  7. Transferring the calibration of direct solar irradiance to diffuse-sky radiance measurements for CIMEL Sun-sky radiometers.

    Science.gov (United States)

    Li, Zhengqiang; Blarel, Luc; Podvin, Thierry; Goloub, Philippe; Buis, Jean-Pierre; Morel, Jean-Philippe

    2008-04-01

    Two types of sunphotometric measurement are considered in this study: direct-Sun irradiance and diffuse-sky radiance. Based on CIMEL CE318 Sun-sky radiometer characteristics, we introduce a gain-corrected solid angle that allows interconverting calibration coefficients of these two types of measurement, thus realizing a "vicarious" radiance calibration. The accuracy of the gain-corrected solid angle depends on the number of available historical calibration records. The method is easy to use, provided that at least one laboratory calibration has been made previously. Examples coming from three distinct CE318 versions belonging to the AERONET/PHOTONS network are presented to provide details on the vicarious calibration method and protocols. From the error propagation analysis and the comparison with laboratory results, the uncertainty of the vicarious radiance calibration is shown to be comparable with the laboratory one, e.g., 3%-5%.

  8. Extrapolation of contrail investigations by LIDAR to larger scale measurements. Analysis and calibration of CCD camera and satellite images

    Energy Technology Data Exchange (ETDEWEB)

    Sussmann, R.; Homburg, F.; Freudenthaler, V.; Jaeger, H. [Frauenhofer Inst. fuer Atmosphaerische Umweltforschung, Garmisch-Partenkirchen (Germany)

    1997-12-31

    The CCD image of a persistent contrail and the coincident LIDAR measurement are presented. To extrapolate the LIDAR derived optical thickness to the video field of view an anisotropy correction and calibration has to be performed. Observed bright halo components result from highly regular oriented hexagonal crystals with sizes of 200 {mu}m-2 mm. This explained by measured ambient humidities below the formation threshold of natural cirrus. Optical thickness from LIDAR shows significant discrepancies to the result from coincident NOAA-14 data. Errors result from anisotropy correction and parameterized relations between AVHRR channels and optical properties. (author) 28 refs.

  9. Comprehensive, Process-based Identification of Hydrologic Models using Satellite and In-situ Water Storage Data: A Multi-objective calibration Approach

    Science.gov (United States)

    Abdo Yassin, Fuad; Wheater, Howard; Razavi, Saman; Sapriza, Gonzalo; Davison, Bruce; Pietroniro, Alain

    2015-04-01

    The credible identification of vertical and horizontal hydrological components and their associated parameters is very challenging (if not impossible) by only constraining the model to streamflow data, especially in regions where the vertical processes significantly dominate the horizontal processes. The prairie areas of the Saskatchewan River basin, a major water system in Canada, demonstrate such behavior, where the hydrologic connectivity and vertical fluxes are mainly controlled by the amount of surface and sub-surface water storages. In this study, we develop a framework for distributed hydrologic model identification and calibration that jointly constrains the model response (i.e., streamflows) as well as a set of model state variables (i.e., water storages) to observations. This framework is set up in the form of multi-objective optimization, where multiple performance criteria are defined and used to simultaneously evaluate the fidelity of the model to streamflow observations and observed (estimated) changes of water storage in the gridded landscape over daily and monthly time scales. The time series of estimated changes in total water storage (including soil, canopy, snow and pond storages) used in this study were derived from an experimental study enhanced by the information obtained from the GRACE satellite. We test this framework on the calibration of a Land Surface Scheme-Hydrology model, called MESH (Modélisation Environmentale Communautaire - Surface and Hydrology), for the Saskatchewan River basin. Pareto Archived Dynamically Dimensioned Search (PA-DDS) is used as the multi-objective optimization engine. The significance of using the developed framework is demonstrated in comparison with the results obtained through a conventional calibration approach to streamflow observations. The approach of incorporating water storage data into the model identification process can more potentially constrain the posterior parameter space, more comprehensively

  10. Astrid-2 SSC ASUMagnetic Calibration

    DEFF Research Database (Denmark)

    Primdahl, Fritz

    1997-01-01

    Report of the inter calibration between the starcamera and the fluxgate magnetometer onboard the ASTRID-2 satellite. This calibration was performed in the night between the 15. and 16. May 1997 at the Lovö magnetic observatory.......Report of the inter calibration between the starcamera and the fluxgate magnetometer onboard the ASTRID-2 satellite. This calibration was performed in the night between the 15. and 16. May 1997 at the Lovö magnetic observatory....

  11. Making Sense of Organisational Change Through Vicarious Narratives

    DEFF Research Database (Denmark)

    Lønsmann, Dorte

    The paper focuses on the role of vicarious narratives in employees’ sense‐making in relation to organisational change. The paper addresses the following research question: How do employees use vicarious narratives to makes sense of organisational change, and of their own role in the organisation......? In this familyowned company, stories about the four generations of the founding family play an important role in making sense of changes and changing values in the organisation. When employees tell stories about the founders and about other employees, and especially when these are told again and again, the telling...... as part of a larger project on multilingual workplaces in Denmark. The fieldwork took place over a period of two years in one Danish SME and consists of ethnographic interviews with employees and management, observations from four different departments and written material e.g. in the form of emails...

  12. Game of Objects: vicarious causation and multi-modal media

    Directory of Open Access Journals (Sweden)

    Aaron Pedinotti

    2013-09-01

    Full Text Available This paper applies philosopher Graham Harman's object-oriented theory of "vicarious causation" to an analysis of the multi-modal media phenomenon known as "Game of Thrones." Examining the manner in which George R.R. Martin's best-selling series of fantasy novels has been adapted into a board game, a video game, and a hit HBO television series, it uses the changes entailed by these processes to trace the contours of vicariously generative relations. In the course of the resulting analysis, it provides new suggestions concerning the eidetic dimensions of Harman's causal model, particularly with regard to causation in linear networks and in differing types of game systems.

  13. Attention effects on vicarious modulation of nociception and pain.

    Science.gov (United States)

    Khatibi, Ali; Vachon-Presseau, Etienne; Schrooten, Martien; Vlaeyen, Johan; Rainville, Pierre

    2014-10-01

    The observation of others' facial expressions of pain has been shown to facilitate the observer's nociceptive responses and to increase pain perception. We investigated how this vicarious facilitation effect is modulated by directing the observer's attention toward the meaning of pain expression or the facial movements. In separate trials, participants were instructed to assess the "intensity of the pain expression"(meaning) or to "discriminate the facial movements" in the upper vs lower part of the face shown in 1-second dynamic clips displaying mild, moderate, or strong pain expressions or a neutral control. In 50% of the trials, participants received a painful electrical stimulation to the sural nerve immediately after the presentation of the expression. Low-level nociceptive reactivity was measured with the RIII-response, and pain perception was assessed using pain ratings. Pain induced by the electrical stimulation increased after viewing stronger pain expressions in both tasks, but the RIII-response showed this vicarious facilitation effect only in the movement discrimination task at the strongest expression intensity. These findings are consistent with the notion that vicarious processes facilitate self-pain and may prime automatic nociceptive responses. However, this priming effect is influenced by top-down attentional processes. These results provide another case of dissociation between reflexive and perceptual processes, consistent with the involvement of partly separate brain networks in the regulation of cortical and lower-level nociceptive responses. Combined with previous results, these findings suggest that vicarious pain facilitation is an automatic process that may be diminished by top-down attentional processes directed at the meaning of the expression.

  14. Personal and vicarious embarrassability: Common and unique personality correlates

    OpenAIRE

    2014-01-01

    Although distinct vicarious embarrassability (VE) and personal embarrassability (PE) dimensions have emerged in factor analytic research, few studies have compared theoretically relevant correlates to explore potential differences in underlying mechanisms. The current study sought to determine whether PE was best accounted for by a social evaluation model, and VE by emotional empathy. Four fifty three undergraduates completed embarrassability, emotional empathy, and social evaluation trait me...

  15. The shifting roles of dispersal and vicariance in biogeography.

    OpenAIRE

    Zink, R M; Blackwell-Rago, R C; Ronquist, F

    2000-01-01

    Dispersal and vicariance are often contrasted as competing processes primarily responsible for spatial and temporal patterns of biotic diversity. Recent methods of biogeographical reconstruction recognize the potential of both processes, and the emerging question is about discovering their relative frequencies. Relatively few empirical studies, especially those employing molecular phylogenies that allow a temporal perspective, have attempted to estimate the relative roles of dispersal and vic...

  16. TOWARD CALIBRATED MODULAR WIRELESS SYSTEM BASED AD HOC SENSORS FOR IN SITU LAND SURFACE TEMPERATURE MEASUREMENTS AS SUPPORT TO SATELLITE REMOTE SENSING

    Directory of Open Access Journals (Sweden)

    ASAAD CHAHBOUN

    2011-06-01

    Full Text Available This paper presents a new method for in situ Land Surface Temperature (LST measurements' campaigns for satellite algorithms validations. The proposed method based on Wireless Sensor Network (WSN is constituted by modules of node arrays. Each of which is constituted by 25 smart nodes scattered throughout a target field. Every node represents a Thermal Infra Red (TIR radiation sensor and keeps a minimum size while ensuring the functions of communication, sensing, and processing. This Wireless-LST (Wi-LST system is convenient to beinstalled on a field pointing to any type of targets (e.g. bare soil, grass, water, etc.. Ad hoc topology is adopted among the TIR nodes with multi-hop mesh routing protocol for communication, acquisition data are transmitted to the client tier wirelessly. Using these emergent technologies, we propose a practical method for Wi-LSTsystem calibration. TIR sensor (i.e. OSM101 from OMEGA society measures temperature, which is conditioned and amplified by an AD595 within a precision of 0.1 °C. Assessed LST is transmitted over thedeveloped ad hoc WSN modules (i.e. MICA2DOT from CROSSBOW society, and collected at in situ base station (i.e. PANASONIC CF19 laptop using an integrated database. LST is evaluated with a polynomialalgorithm structure as part of developed software. Finally, the comparison of the mean values of LST(Wi-LST in each site with the Moderate Resolution Imaging Spectro-radiometer (MODIS sensor, obtained from the daily LST product (MOD11C1 developed by the MODIS-NASA Science Team, on board TERRA satellite during the campaign period is provided.

  17. Demands in reflecting about another's motives and intentions modulate vicarious embarrassment in autism spectrum disorders.

    Science.gov (United States)

    Paulus, Frieder M; Kamp-Becker, Inge; Krach, Sören

    2013-04-01

    The affective responses to another person's condition depend on the ability to reflect about another's thoughts and intentions. This is relevant also for high-functioning individuals with ASD who have considerable difficulties in reading the intentions of others. With the present study we introduce a novel paradigm to induce vicarious embarrassment as a form of social pain. We predicted that the vicarious embarrassment experiences of high-functioning individuals with ASD should specifically decline in social contexts that require reflecting on another's intentions. Thirty-two young adults with high-functioning ASD were matched with regards to age, gender, and verbal IQ to a control group. Vicarious embarrassment was examined with previously validated stimuli describing 30 situations that elicit vicarious embarrassment in the observer. The situations manipulated whether the displayed protagonist either accidentally or intentionally transgressed a social norm in public and participants rated their vicarious embarrassment from the observer's perspective. The ASD group showed comparable vicarious embarrassment experience in response to observing another's accidental norm transgressions but significantly reduced vicarious embarrassment when observing another who intentionally violated socials norms. Vicarious embarrassment was significantly correlated with trait empathy in the ASD group. In complex social scenarios individuals with ASD are impaired in reporting experience of vicarious embarrassment, primarily when it is required to reflect on another's intentions. The present study thus contributes to a better understanding of how persons with ASD are affected in the diversity of empathic processes in the social, everyday life environment they are embedded in.

  18. The UV-A and visible solar irradiance spectrum: inter-comparison of absolutely calibrated, spectrally medium resolution solar irradiance spectra from balloon- and satellite-borne measurements

    Directory of Open Access Journals (Sweden)

    W. Gurlit

    2005-01-01

    Full Text Available Within the framework of the ENVISAT/-SCIAMACHY satellite validation, solar irradiance spectra are absolutely measured at moderate resolution in the UV/visible spectral range (in the UV from 316.7-418 nm and the visible from 400-652 nm at a full width half maximum resolution of 0.55 nm and 1.48 nm, respectively from aboard the azimuth-controlled LPMA/DOAS balloon gondola at around 32 km balloon float altitude. After accounting for the atmospheric extinction due to Rayleigh scattering and gaseous absorption (O3 and NO2, the measured solar spectra are compared with previous observations. Our solar irradiance spectrum perfectly agrees within +0.03% with the re-calibrated Kurucz et al. (1984 solar spectrum (Fontenla et al., 1999, called MODTRAN 3.7 in the visible spectral range (415-650 nm, but it is +2.1% larger in the (370-415 nm wavelength interval, and -4% smaller in the UV-A spectral range (316.7-370 nm, when the Kurucz spectrum is convolved to the spectral resolution of our instrument. Similar comparisons of the SOLSPEC (Thuillier et al., 1997, 1998a, b and SORCE/SIM (Harder et al., 2000 solar spectra with MODTRAN 3.7 confirms our findings with the values being -0.5%, +2%, and -1.4% for SOLSPEC -0.33%, -0.47%, and -6.2% for SORCE/SIM, respectively. Comparison of the SCIAMACHY solar spectrum from channels 1 to 4 (- re-calibrated by the University of Bremen - with MODTRAN 3.7 indicates an agreement within -0.4% in the visible spectral range (415-585 nm, -1.6% within the 370-415 nm, and -5.7% within 325-370 nm wavelength interval, in agreement with the results of the other sensors. In agreement with findings of Skupin et al. (2002 our study emphasizes that the present ESA SCIAMACHY level 1 calibration is systematically +15% larger in the considered wavelength intervals when compared to all available other solar irradiance measurements.

  19. The Vicarious Look, or, Andy Warhol's Apparatus Theory

    OpenAIRE

    Young, DR

    2015-01-01

    The so-called “apparatus theory” that developed in France, England and the US in the 1970s, moving beyond formalist and aesthetic approaches, produced an analysis of the structural conditions (technological, social and economic) of the cinema. The concept of voyeurism was central to those accounts: the “cinematic apparatus” aligns the spectator’s look with the “all-seeing” look of the camera (the famous “primary identification” theorized by Metz). In offering him a “vicarious look” onto a wor...

  20. Beyond Vicary's fantasies: The impact of subliminal priming and brand choice

    NARCIS (Netherlands)

    Karremans, J.C.T.M.; Stroebe, W.; Claus, J.

    2006-01-01

    With his claim to have increased sales of Coca Cola and popcorn in a movie theatre through subliminal messages flashed on the screen, James Vicary raised the possibility of subliminal advertising. Nobody has ever replicated Vicary's findings and his study was a hoax. This article reports two experim

  1. Teaching parents about responsive feeding through a vicarious learning video: A pilot randomized controlled trial

    Science.gov (United States)

    The American Academy of Pediatrics and World Health Organization recommend responsive feeding (RF) to promote healthy eating behaviors in early childhood. This project developed and tested a vicarious learning video to teach parents RF practices. A RF vicarious learning video was developed using com...

  2. Information about the model's unconditioned stimulus and response in vicarious classical conditioning.

    Science.gov (United States)

    Hygge, S

    1976-06-01

    Four groups with 16 observers each participated in a differential, vicarious conditioning experiment with skin conductance responses as the dependent variable. The information available to the observer about the model's unconditioned stimulus and response was varied in a 2 X 2 factorial design. Results clearly showed that information about the model's unconditioned stimulus (a high or low dB level) was not necessary for vicarious instigation, but that information about the unconditioned response (a high or low emotional aversiveness) was necessary. Data for conditioning of responses showed almost identical patterns to those for vicarious instigation. To explain the results, a distinction between factors necessary for the development and elicitation of vicariously instigated responses was introduced, and the effectiveness of information about the model's response on the elicitation of vicariously instigated responses was considered in terms of an expansion of Bandura's social learning theory.

  3. A Precipitation Satellite Downscaling & Re-Calibration Routine for TRMM 3B42 and GPM Data Applied to the Tropical Andes

    Science.gov (United States)

    Manz, B.; Buytaert, W.; Tobón, C.; Villacis, M.; García, F.

    2014-12-01

    With the imminent release of GPM it is essential for the hydrological user community to improve the spatial resolution of satellite precipitation products (SPPs), also retrospectively of historical time-series. Despite the growing number of applications, to date SPPs have two major weaknesses. Firstly, geosynchronous infrared (IR) SPPs, relying exclusively on cloud elevation/ IR temperature, fail to replicate ground rainfall rates especially for convective rainfall. Secondly, composite SPPs like TRMM include microwave and active radar to overcome this, but the coarse spatial resolution (0.25°) from infrequent orbital sampling often fails to: a) characterize precipitation patterns (especially extremes) in complex topography regions, and b) allow for gauge comparisons with adequate spatial support. This is problematic for satellite-gauge merging and subsequent hydrological modelling applications. We therefore present a new re-calibration and downscaling routine that is applicable to 0.25°/ 3-hrly TRMM 3B42 and Level 3 GPM time-series to generate 1 km estimates. 16 years of instantaneous TRMM radar (TPR) images were evaluated against a unique dataset of over 100 10-min rain gauges from the tropical Andes (Colombia & Ecuador) to develop a spatially distributed error surface. Long-term statistics on occurrence frequency, convective/ stratiform fraction and extreme precipitation probability (Gamma & Generalized Pareto distributions) were computed from TPR at the 1 km scale as well as from TPR and 3B42 at the 0.25° scale. To downscale from 0.25° to 1 km a stochastic generator was used to restrict precipitation occurrence to a fraction of the 1 km pixels within the 0.25° gridcell at every time-step. Regression modelling established a relationship between probability distributions at the 0.25° scale and rainfall amounts were assigned to the retained 1 km pixels by quantile-matching to the gridcell. The approach inherently provides mass conservation of the downscaled

  4. Calibrating Satellite-Based Indices of Burn Severity from UAV-Derived Metrics of a Burned Boreal Forest in NWT, Canada

    Directory of Open Access Journals (Sweden)

    Robert H. Fraser

    2017-03-01

    Full Text Available Wildfires are a dominant disturbance to boreal forests, and in North America, they typically cause widespread tree mortality. Forest fire burn severity is often measured at a plot scale using the Composite Burn Index (CBI, which was originally developed as a means of assigning severity levels to the Normalized Burn Ratio (NBR computed from Landsat satellite imagery. Our study investigated the potential to map biophysical indicators of burn severity (residual green vegetation and charred organic surface at very high (3 cm resolution, using color orthomosaics and vegetation height models derived from UAV-based photographic surveys and Structure from Motion methods. These indicators were scaled to 30 m resolution Landsat pixel footprints and compared to the post-burn NBR (post-NBR and differenced NBR (dNBR ratios computed from pre- and post-fire Landsat imagery. The post-NBR showed the strongest relationship to both the fraction of charred surface (exponential R2 = 0.79 and the fraction of green crown vegetation above 5 m (exponential R2 = 0.81, while the dNBR was more closely related to the total green vegetation fraction (exponential R2 = 0.69. Additionally, the UAV green fraction and Landsat indices could individually explain more than 50% of the variance in the overall CBI measured in 39 plots. These results provide a proof-of-concept for using low-cost UAV photogrammetric mapping to quantify key measures of boreal burn severity at landscape scales, which could be used to calibrate and assign a biophysical meaning to Landsat spectral indices for mapping severity at regional scales.

  5. Data use investigations for applications Explorer Mission A (Heat Capacity Mapping Mission): HCMM's role in studies of the urban heat island, Great Lakes thermal phenomena and radiometric calibration of satellite data. [Buffalo, Syracuse, and Rochester New York and Lake Ontario

    Science.gov (United States)

    Schott, J. R. (Principal Investigator); Schimminger, E. W.

    1981-01-01

    The utility of data from NASA'a heat capacity mapping mission satellite for studies of the urban heat island, thermal phenomena in large lakes and radiometric calibration of satellite sensors was assessed. The data were found to be of significant value in all cases. Using HCMM data, the existence and microstructure of the heat island can be observed and associated with land cover within the urban complex. The formation and development of the thermal bar in the Great Lakes can be observed and quantitatively mapped using HCMM data. In addition, the thermal patterns observed can be associated with water quality variations observed both from other remote sensing platforms and in situ. The imaging radiometer on-board the HCMM satellite is shown to be calibratible to within about 1.1 C of actual surface temperatures. These findings, as well as the analytical procedures used in studying the HCMM data, are included.

  6. Landsat TM and ETM+ thermal band calibration

    Science.gov (United States)

    Barsi, J.A.; Schott, J.R.; Palluconi, F. D.; Helder, D.L.; Hook, S.J.; Markham, B.L.; Chander, G.; O'Donnell, E. M.

    2003-01-01

    Landsat-5 has been imaging the Earth since March 1984, and Landsat-7 was added to the series of Landsat instruments in April 1999. The Landsat Project Science Office and the Landsat-7 Image Assessment System have been monitoring the on-board calibration of Landsat-7 since launch. Additionally, two separate university teams have been evaluating the on-board thermal calibration of Landsat-7 through ground-based measurements since launch. Although not monitored as closely over its lifetime, a new effort is currently being made to validate the calibration of Landsat-5. Two university teams are beginning to collect ground truth under Landsat-5, along with using other vicarious calibration methods to go back into the archive to validate the history of the calibration of Landsat-5. This paper considers the calibration efforts for the thermal band, band 6, of both the Landsat-5 and Landsat-7 instruments. Though stable since launch, Landsat-7 had an initial calibration error of about 3 K, and changes were made to correct for this beginning 1 October 2000 for data processed with the National Landsat Archive Production System (NLAPS) and beginning 20 December 2000 for data processed with the Landsat Product Generation System (LPGS). Recent results from Landsat-5 vicarious calibration efforts show an offset of –0.7 K over the lifetime of the instrument. This suggests that historical calibration efforts may have been detecting errors in processing systems rather than changes in the instrument. A correction to the Landsat-5 processing has not yet been implemented but will be in the near future.

  7. Vicarious pain experiences while observing another in pain: an experimental approach

    Directory of Open Access Journals (Sweden)

    Sophie eVandenbroucke

    2013-06-01

    Full Text Available Objective: This study aimed at developing an experimental paradigm to assess vicarious pain experiences. We further explored the putative moderating role of observer’s characteristics such as hypervigilance for pain and dispositional empathy. Methods: Two experiments are reported using a similar procedure. Undergraduate students were selected based upon whether they reported vicarious pain in daily life, and categorized into a pain responder group or a comparison group. Participants were presented a series of videos showing hands being pricked whilst receiving occasionally pricking (electrocutaneous stimuli themselves. In congruent trials, pricking and visual stimuli were applied to the same spatial location. In incongruent trials, pricking and visual stimuli were in the opposite spatial location. Participants were required to report on which location they felt a pricking sensation. Of primary interest was the effect of viewing another in pain upon vicarious pain errors, i.e., the number of trials in which an illusionary sensation was reported. Furthermore, we explored the effect of individual differences in hypervigilance to pain, dispositional empathy and the rubber hand illusion (RHI upon vicarious pain errors. Results: Results of both experiments indicated that the number of vicarious pain errors was overall low. In line with expectations, the number of vicarious pain errors was higher in the pain responder group than in the comparison group. Self-reported hypervigilance for pain lowered the probability of reporting vicarious pain errors in the pain responder group, but dispositional empathy and the RHI did not. Conclusion: Our paradigm allows measuring vicarious pain experiences in students. However, the prevalence of vicarious experiences of pain is low, and only a small percentage of participants display the phenomenon. It remains however unknown which variables affect its occurrence.

  8. Treating fossils as terminal taxa in divergence time estimation reveals ancient vicariance patterns in the palpimanoid spiders.

    Science.gov (United States)

    Wood, Hannah Marie; Matzke, Nicholas J; Gillespie, Rosemary G; Griswold, Charles E

    2013-03-01

    Incorporation of fossils into biogeographic studies can have a profound effect on the conclusions that result, particularly when fossil ranges are nonoverlapping with extant ranges. This is the case in archaeid spiders, where there are known fossils from the Northern Hemisphere, yet all living members are restricted to the Southern Hemisphere. To better understand the biogeographic patterns of archaeid spiders and their palpimanoid relatives, we estimate a dated phylogeny using a relaxed clock on a combined molecular and morphological data set. Dating information is compared with treating the archaeid fossil taxa as both node calibrations and as noncontemporaneous terminal tips, both with and without additional calibration points. Estimation of ancestral biogeographic ranges is then performed, using likelihood and Bayesian methods to take into account uncertainty in phylogeny and in dating. We find that treating the fossils as terminal tips within a Bayesian framework, as opposed to dating the phylogeny based only on molecular data with the dates coming from node calibrations, removes the subjectivity involved in assigning priors, which has not been possible with previous methods. Our analyses suggest that the diversification of the northern and southern archaeid lineages was congruent with the breakup of Pangaea into Laurasia and Gondwanaland. This analysis provides a rare example, and perhaps the most strongly supported, where a dated phylogeny confirms a biogeographical hypothesis based on vicariance due to the breakup of the ancient continental plates.

  9. TWSTFT Link Calibration Report

    Science.gov (United States)

    2015-09-01

    box calibrator with unknown but constant total delay during a calibration tour Total Delay: The total electrical delay from the antenna phase center...to the UTCp including all the devices/cables that the satellite and clock signals pass through. It numerically equals the sum of all the sub-delays...PTB. To average out the dimnal effects and measurement noise , 5-7 days of continuous measurements is required. 3 Setups at the Lab(k) The setup

  10. Personal protection: vicarious liability as applied to the various business structures.

    Science.gov (United States)

    Winrow, Brian; Winrow, Amanda R

    2008-01-01

    Within the field of midwifery, the issue of vicarious liability has become an emerging issue. The doctrine of respondeat superior imputes liability to an employer without direct negligence. While the issue of vicarious liability has been explored in the past, those studies were focused on the vicarious liability of certified nurse-midwives/certified midwives (CNMs/CMs) for the negligence of their employees. This article explores the issue of vicarious liability under the doctrine of respondeat superior as applied within a practice consisting of two or more co-owners. This issue is of heightened importance, because CNMs/CMs increasingly enter into ventures with other CNMs/CMs in order to pool their resources. Many CNMs/CMs unsuspectingly assume the risks for the malpractice of their colleagues. This increased risk can be minimized by forming their practice as a limited liability entity, thus avoiding personal liability for the malpractice of their co-owner(s).

  11. Crocodyliform biogeography during the Cretaceous: evidence of Gondwanan vicariance from biogeographical analysis.

    Science.gov (United States)

    Turner, Alan H.

    2004-01-01

    Explanations of the distributions of terrestrial vertebrates during the Mesozoic are currently vigorously contested and debated in palaeobiogeography. Recent studies focusing on dinosaurs yield conflicting hypotheses. Dispersal, coupled with regional extinction or vicariance driven by continental break-up, have been cited as the main causal factors behind dinosaur distributions in the Mesozoic. To expand the scope of the debate and test for vicariance within another terrestrial group, I herein apply a cladistic biogeographical method to a large sample of Cretaceous crocodyliform taxa. A time-slicing methodology is employed and a refinement made to account for the divergence times of the analysed clades. The results provide statistically significant evidence that Gondwana fragmentation affected crocodyliform diversification during the Mid-Late Cretaceous. Detection of a vicariant pattern within crocodyliforms is important as it helps corroborate vicariance hypotheses in other fossil and extant groups as well as furthers the move towards more taxonomically diverse approaches to palaeobiogeographical research. PMID:15451689

  12. Calibration of Angular Systematic Errors for High Resolution Satellite Imagery%高分辨率卫星遥感影像姿态角系统误差检校

    Institute of Scientific and Technical Information of China (English)

    袁修孝; 余翔

    2012-01-01

    The object positioning accuracy from high resolution satellite imagery is strongly relevant to image attitude data accuracy, but the attitude data have generally systematic errors and the object location becomes unreliable. The angular systematic error calibration model is stricter than constant angular error calibration model, based on the rigorous geometric processing model of high resolution satellite remote sensing imagery. The calibration model was tested on SPOT-5 and CBERS-02B images and both have proved its correctness. After compensating the angular systematic errors of images, the direct georeferencing accuracy can reach ±(2-3) pixels, which is much better than results of constant angular calibration.%简要介绍高分辨率卫星遥感影像的严格几何处理模型,提出较为严密的影像姿态角系统误差检校模型。通过对SPOT-5、CBERS-02B两种卫星遥感影像的试验证实模型的正确性和方法的有效性。对影像姿态角系统误差进行补偿后,可明显提高卫星遥感影像对地目标定位的精度,且优于影像姿态角常差检校的效果,目标点平面定位精度达到了±(2-~3)像素的水平。

  13. Calibration and performance analysis on channel mismatch of multi-beam antenna on satellites%星载多波束天线通道误差特性分析及校准

    Institute of Scientific and Technical Information of China (English)

    赵星惟; 龚文斌; 梁旭文

    2012-01-01

    针对星载多波束天线幅相误差对天线性能影响较大的问题,通过对多波束发射天线的射频通道在不同温度下的幅相特性进行试验测定,得到了通道幅相特性与温度的对应关系,发现不同通道的幅相特性与通道温度的关系曲线在给定温度区间内基本呈线性关系,且斜率基本一致,从而确定了对不同通道的幅相特性进行固定值补偿的校准策略.通过固定值补偿后,各通道的幅相特性曲线基本重合,从而消除了通道间幅相误差.进一步给出了提升温度一致性的措施,并设计了多波束发射天线的校准原理框图和校准流程图.结果表明:新的星载多波束天线幅相误差校准方法是有效的.%To solve the mismatch effect of amplitude-and-phase errors on multi-beam antenna performance , the radio frequency channel amplitude and phase errors of multi-beam transmitting antenna on satellite were experimentally measured to obtain the corresponding relations of channel amplitude-and-phase mismatch and temperature, and to compensate the mismatch. The shell temperatures are almost same after temperature stabilization, which effectively results in channel consistency. Some methods were used to improve temperature consistency. Calibration of channel is the key to guarantee the performance indexes of multi-beam antenna on satellites. The calibration principle block diagram and flow chart of multi-beam transmitting antenna were designed. The theoretical analysis and simulation results show that the proposed calibration method is effective for calibration of multi-beam antenna on satellites.

  14. First calibration results of Jason-2 and SARAL/AltiKa satellite altimeters from the Qianli Yan permanent Cal/Val facilities, China

    Science.gov (United States)

    Yang, Lei; Zhou, Xinghua; Mertikas, S. P.; Zhu, Lin; Yang, Long; Lei, Ning

    2017-06-01

    This work presents the first calibration results for the Jason-2 and the SARAL/AltiKa altimetric missions by using the permanent calibration facilities on the Qianli Yan islet (China). Qianli Yan is located in the Yellow Sea and only ∼3 km from the Jason-2 and SARAL/AltiKa crossover point. Analysis of the Jason-2 and SARAL/AltiKa waveform data and geophysical data over the Qianli Yan calibration area has proven that the altimeters and microwave radiometers are not contaminated by the mainland or the islet. The accuracies of the regional geoid model, provided by the First Institute of Oceanography (FIO), State Oceanic Administration of China, and the DTU10 MSS model were assessed by a GNSS buoy experiment. The results indicated that the FIO model is suitable for altimeter calibration in the Qianli Yan area. From the observations and the geoid model, the absolute biases for the Jason-2 and SARAL/AltiKa altimeters (2013-2014) were determined as 21.0 ± 5.9 and -44.0 ± 7.3 mm, respectively. The 2 years' results indicated that the Jason-2 bias had no trend. However, the SARAL/AltiKa bias presented a downward trend that was more stable in 2014 than in 2013. The Qianli Yan results are consistent with those determined by other international dedicated calibration sites and crossover analysis.

  15. Sympathetic pain? A role of poor parasympathetic nervous system engagement in vicarious pain states.

    Science.gov (United States)

    Nazarewicz, Julia; Verdejo-Garcia, Antonio; Giummarra, Melita J

    2015-11-01

    This study investigated the psychophysiological correlates of the subjective experience of vicarious pain; that is, a spontaneous experience of pain when seeing another in pain. Forty-nine healthy, otherwise pain-free individuals aged 18-55 years completed empathy and anxiety questionnaires and were classified into three groups: vicarious responders with high anxiety (n = 11), vicarious responders with low anxiety (n = 22), and nonresponders (n = 16). Electrophysiological recordings of heart rate variability (HRV) during paced breathing and cognitive stress (serial sevens task) were completed before participants viewed short videos of athletes in states of pain or happiness, taken from Australian League Football matches. Change in beats per minute, relative to neutral scenes, were analyzed for the first 4 s after onset of the painful or happy event. Anxious responders had lower HF-HRV than both other groups, implicating poor parasympathetic regulation specific to states of stress. Both vicarious responder groups had elevated HR at the event onset, regardless of valence. After viewing painful injuries, nonanxious vicarious responders showed sustained HR over time, anxious responders showed HR acceleration with a peak at 3 s after the injury onset, and nonresponders showed a pattern of marked HR deceleration. These findings suggest that vicarious pain in anxious responders is associated with poorly regulated sympathetic arousal via insufficient inhibitory parasympathetic activity, whereas nonanxious persons show sustained arousal. Clearly, multiple mechanisms in the central and peripheral nervous system must play a role in vicarious pain states, and the different manifestations are likely to lead to very different behavioral consequences. © 2015 Society for Psychophysiological Research.

  16. Calibration and evaluation of a flood forecasting system: Utility of numerical weather prediction model, data assimilation and satellite-based rainfall

    Science.gov (United States)

    Yucel, I.; Onen, A.; Yilmaz, K. K.; Gochis, D. J.

    2015-04-01

    A fully-distributed, multi-physics, multi-scale hydrologic and hydraulic modeling system, WRF-Hydro, is used to assess the potential for skillful flood forecasting based on precipitation inputs derived from the Weather Research and Forecasting (WRF) model and the EUMETSAT Multi-sensor Precipitation Estimates (MPEs). Similar to past studies it was found that WRF model precipitation forecast errors related to model initial conditions are reduced when the three dimensional atmospheric data assimilation (3DVAR) scheme in the WRF model simulations is used. A comparative evaluation of the impact of MPE versus WRF precipitation estimates, both with and without data assimilation, in driving WRF-Hydro simulated streamflow is then made. The ten rainfall-runoff events that occurred in the Black Sea Region were used for testing and evaluation. With the availability of streamflow data across rainfall-runoff events, the calibration is only performed on the Bartin sub-basin using two events and the calibrated parameters are then transferred to other neighboring three ungauged sub-basins in the study area. The rest of the events from all sub-basins are then used to evaluate the performance of the WRF-Hydro system with the calibrated parameters. Following model calibration, the WRF-Hydro system was capable of skillfully reproducing observed flood hydrographs in terms of the volume of the runoff produced and the overall shape of the hydrograph. Streamflow simulation skill was significantly improved for those WRF model simulations where storm precipitation was accurately depicted with respect to timing, location and amount. Accurate streamflow simulations were more evident in WRF model simulations where the 3DVAR scheme was used compared to when it was not used. Because of substantial dry bias feature of MPE, as compared with surface rain gauges, streamflow derived using this precipitation product is in general very poor. Overall, root mean squared errors for runoff were reduced by

  17. Combining satellite radar altimetry, SAR surface soil moisture and GRACE total storage changes for hydrological model calibration in a large poorly gauged catchment

    DEFF Research Database (Denmark)

    Milzow, Christian; Krogh, Pernille Engelbredt; Bauer-Gottwein, Peter

    2011-01-01

    The availability of data is a major challenge for hydrological modelling in large parts of the world. Remote sensing data can be exploited to improve models of ungauged or poorly gauged catchments. In this study we combine three datasets for calibration of a rainfall-runoff model of the poorly...

  18. Differential influence of social versus isolate housing on vicarious fear learning in adolescent mice.

    Science.gov (United States)

    Panksepp, Jules B; Lahvis, Garet P

    2016-04-01

    Laboratory rodents can adopt the pain or fear of nearby conspecifics. This phenotype conceptually lies within the domain of empathy, a bio-psycho-social process through which individuals come to share each other's emotion. Using a model of cue-conditioned fear, we show here that the expression of vicarious fear varies with respect to whether mice are raised socially or in solitude during adolescence. The impact of the adolescent housing environment was selective: (a) vicarious fear was more influenced than directly acquired fear, (b) "long-term" (24-h postconditioning) vicarious fear memories were stronger than "short-term" (15-min postconditioning) memories in socially reared mice whereas the opposite was true for isolate mice, and (c) females were more fearful than males. Housing differences during adolescence did not alter the general mobility of mice or their vocal response to receiving the unconditioned stimulus. Previous work with this mouse model underscored a genetic influence on vicarious fear learning, and the present study complements these findings by elucidating an interaction between the adolescent social environment and vicarious experience. Collectively, these findings are relevant to developing models of empathy amenable to mechanistic exploitation in the laboratory. (PsycINFO Database Record

  19. Specific Vicariance of Two Primeval Lowland Forest Lichen Indicators

    Science.gov (United States)

    Kubiak, Dariusz; Osyczka, Piotr

    2017-06-01

    To date, the lichens Chrysothrix candelaris and Varicellaria hemisphaerica have been classified as accurate primeval lowland forest indicators. Both inhabit particularly valuable remnants of oak-hornbeam forests in Europe, but tend toward a specific kind of vicariance on a local scale. The present study was undertaken to determine habitat factors responsible for this phenomenon and verify the indicative and conservation value of these lichens. The main spatial and climatic parameters that, along with forest structure, potentially affect their distribution patterns and abundance were analysed in four complexes with typical oak-hornbeam stands in NE Poland. Fifty plots of 400 m2 each were chosen for detailed examination of stand structure and epiphytic lichens directly associated with the indicators. The study showed that the localities of the two species barely overlap within the same forest community in a relatively small geographical area. The occurrence of Chrysothrix candelaris depends basically only on microhabitat space provided by old oaks and its role as an indicator of the ecological continuity of habitat is limited. Varicellaria hemisphaerica is not tree specific but a sufficiently high moisture of habitat is essential for the species and it requires forests with high proportion of deciduous trees in a wide landscape scale. Local landscape-level habitat continuity is more important for this species than the current age of forest stand. Regardless of the indicative value, localities of both lichens within oak-hornbeam forests deserve the special protection status since they form unique assemblages of exclusive epiphytes, including those with high conservation value.

  20. Calibration plan for the sea and land surface temperature radiometer

    Science.gov (United States)

    Smith, David L.; Nightingale, Tim J.; Mortimer, Hugh; Middleton, Kevin; Edeson, Ruben; Cox, Caroline V.; Mutlow, Chris T.; Maddison, Brian J.

    2013-10-01

    The Sea and Land Surface Temperature Radiometer (SLSTR) to be flown on ESA's Sentinel-3 mission is a multichannel scanning radiometer that will continue the 21-year datasets of the Along Track Scanning Radiometer (ATSR) series. As its name implies, measurements from SLSTR will be used to retrieve global sea surface temperatures to an uncertainty of SLSTR instrument, infrared calibration sources and alignment equipment. The calibration rig has been commissioned and results of these tests will be presented. Finally the authors will present the planning for the on-orbit monitoring and calibration activities to ensure that calibration is maintained. These activities include vicarious calibration techniques that have been developed through previous missions, and the deployment of ship-borne radiometers.

  1. Vicarious group-based rejection: creating a potentially dangerous mix of humiliation, powerlessness, and anger.

    Directory of Open Access Journals (Sweden)

    Tinka M Veldhuis

    Full Text Available Rejection can convey that one is seen as inferior and not worth bothering with. Is it possible for people to feel vicariously rejected in this sense and have reactions that are similar to those following personal rejection, such as feeling humiliated, powerless, and angry? A study on personal rejection was followed by two main studies on vicarious group-based rejection. It was found that merely observing rejection of ingroup members can trigger feelings of humiliation that are equally intense as those experienced in response to personal rejection. Moreover, given that the rejection is explicit, vicariously experienced feelings of humiliation can be accompanied by powerlessness and anger. Potentially, this combination of emotions could be an important source of offensive action against rejecters.

  2. Effects of Vicarious Experiences of Nature, Environmental Attitudes, and Outdoor Recreation Benefits on Support for Increased Funding Allocations

    Science.gov (United States)

    Kil, Namyun

    2016-01-01

    This study examined the effects of vicarious experiences of nature, environmental attitudes, and recreation benefits sought by participants on their support for funding of natural resources and alternative energy options. Using a national scenic trail user survey, results demonstrated that vicarious experiences of nature influenced environmental…

  3. The Deep-Level-Reasoning-Question Effect: The Role of Dialogue and Deep-Level-Reasoning Questions during Vicarious Learning

    Science.gov (United States)

    Craig, Scotty D.; Sullins, Jeremiah; Witherspoon, Amy; Gholson, Barry

    2006-01-01

    We investigated the impact of dialogue and deep-level-reasoning questions on vicarious learning in 2 studies with undergraduates. In Experiment 1, participants learned material by interacting with AutoTutor or by viewing 1 of 4 vicarious learning conditions: a noninteractive recorded version of the AutoTutor dialogues, a dialogue with a…

  4. Towards Calibration of Sentinel 3 Data: Validation of Satellite-Derived SST Against In Situ Coastal Observations of the Portuguese Marine Waters

    Science.gov (United States)

    Vicente, Ricardo; Esteves, Rita; Lamas, Luisa; Pinto, Jose Paulo; Almeida, Sara; de Azevedo, Eduardo; Correia, Cecilia; Reis, Francisco

    2016-08-01

    Validation of future Sentinel-3 SLSTR data in the Eastern Atlantic Ocean was analysed here through a comparison of satellite-derived STT against in situ mooring buoys observations.SSTskin retrieved from IR satellite radiometers on- board ERS 1-2, Envisat, and Aqua, and concurrent SSTbulk measured with 14 buoy thermistors located at 1m depth were used to assess the statistical relationships between these datasets, with 20038 match- ups spanning from 1996 to 2015.As expected, results showed consistency between SSTskin and SSTbulk, exhibiting a correlation coefficient on the order of 98 %. Biases of both (A)ATSR and MODIS for day-time suggest a warmer satellite skin retrieval of + 0.15o and + 0.06o, respectively. For the night-time dataset, biases of - 0.25o and - 0.17o for (A)A TSR and MODIS, respectively, indicate cooler skin retrievals and reveal an inversion of the upper ocean thermic gradient. The RMSE ´s found were 0.53o for (A)ATSR and 0.41o for MODIS datasets.

  5. Fear of property crime: examining the effects of victimization, vicarious victimization, and perceived risk.

    Science.gov (United States)

    Cook, Carrie L; Fox, Kathleen A

    2011-01-01

    Fear of crime research has primarily focused on fear of crime in general or on fear of specific types of violent crimes. This study builds from this line of research by focusing exclusively on the night fear of six types of property crimes, including fear of burglary while away from home, vehicle theft, bicycle theft, property theft, vandalism, and vehicle burglary. This study examines the effects of victimization, vicarious victimization, and perceived risk on fear of property crime. Survey data from college students reveal that victimization and vicarious victimization were not significant predictors of fear of property crime, whereas perceived risk was a consistent and significant predictor of fear of all property crimes.

  6. In-Orbit Spectral Response Function Correction and Its Impact on Operational Calibration for the Long-Wave Split-Window Infrared Band (12.0 μm of FY-2G Satellite

    Directory of Open Access Journals (Sweden)

    Qiang Guo

    2017-06-01

    Full Text Available During the early stage of the G satellite of the Fengyun-2 series (FY-2G, severe cold biases up to ~2.3 K occur in its measurements in the 12.0 μm (IR2 band, which demonstrate time- and scene-dependent characteristics. Similar cold biases in water vapor and carbon dioxide absorption bands of other satellites are considered to be caused by either ice contamination (physical method or spectral response function (SRF shift (empirical method. Simulations indicate that this cold bias of FY-2G indeed suffers from equivalent SRF shift as a whole towards the longer wavelength direction. To overcome it, a novel approach combining both physical and empirical methods is proposed. With the possible ice thicknesses tested before launch, the ice contamination effect is alleviated, while the shape of the SRF can be modified in a physical way. The remaining unknown factors for cold bias are removed by shifting the convolved SRF with an ice transmittance spectrum. Two parameters, i.e., the ice thickness (5 μm and the shifted value (+0.15 μm, are estimated by inter-calibration with reference instruments, and the modification coefficient is also calculated (0.9885 for the onboard blackbody calibration. Meanwhile, the updated SRF was released online on 23 March 2016. For the period between July 2015 and December 2016, the monthly biases of the FY-2G IR2 band remain oscillating around zero, the majorities (~89% of which are within ±1.0 K, while its mean monthly absolute bias is around 0.6 K. Nevertheless, the cold bias phenomenon of the IR2 band no longer exists. The combination method can be referred by other corrections for cold biases.

  7. Calibration uncertainty

    DEFF Research Database (Denmark)

    Heydorn, Kaj; Anglov, Thomas

    2002-01-01

    Methods recommended by the International Standardization Organisation and Eurachem are not satisfactory for the correct estimation of calibration uncertainty. A novel approach is introduced and tested on actual calibration data for the determination of Pb by ICP-AES. The improved calibration unce...

  8. Molecular phylogenetics reveal multiple tertiary vicariance origins of the African rain forest trees

    Directory of Open Access Journals (Sweden)

    Sosef Marc SM

    2008-12-01

    Full Text Available Abstract Background Tropical rain forests are the most diverse terrestrial ecosystems on the planet. How this diversity evolved remains largely unexplained. In Africa, rain forests are situated in two geographically isolated regions: the West-Central Guineo-Congolian region and the coastal and montane regions of East Africa. These regions have strong floristic affinities with each other, suggesting a former connection via an Eocene pan-African rain forest. High levels of endemism observed in both regions have been hypothesized to be the result of either 1 a single break-up followed by a long isolation or 2 multiple fragmentation and reconnection since the Oligocene. To test these hypotheses the evolutionary history of endemic taxa within a rain forest restricted African lineage of the plant family Annonaceae was studied. Molecular phylogenies and divergence dates were estimated using a Bayesian relaxed uncorrelated molecular clock assumption accounting for both calibration and phylogenetic uncertainties. Results Our results provide strong evidence that East African endemic lineages of Annonaceae have multiple origins dated to significantly different times spanning the Oligocene and Miocene epochs. Moreover, these successive origins (c. 33, 16 and 8 million years – Myr coincide with known periods of aridification and geological activity in Africa that would have recurrently isolated the Guineo-Congolian rain forest from the East African one. All East African taxa were found to have diversified prior to Pleistocene times. Conclusion Molecular phylogenetic dating analyses of this large pan-African clade of Annonaceae unravels an interesting pattern of diversification for rain forest restricted trees co-occurring in West/Central and East African rain forests. Our results suggest that repeated reconnections between the West/Central and East African rain forest blocks allowed for biotic exchange while the break-ups induced speciation via vicariance

  9. Housewives' Self-Esteem and Their Husbands' Success: The Myth of Vicarious Involvement.

    Science.gov (United States)

    Macke, Anne Statham; And Others

    1979-01-01

    This study tests the common assertion that women, especially upper-middle-class housewives, vicariously experience their husbands' success. Findings for 121 mostly upper-middle-class housewives disprove this assertion. Husband's success does positively affect a housewife's self-esteem, but only indirectly, through its effect on perceived marital…

  10. Vicarious Racism: A Qualitative Analysis of Experiences with Secondhand Racism in Graduate Education

    Science.gov (United States)

    Truong, Kimberly A.; Museus, Samuel D.; McGuire, Keon M.

    2016-01-01

    In this article, the authors examine the role of vicarious racism in the experiences of doctoral students of color. The researchers conducted semi-structured individual interviews with 26 doctoral students who self-reported experiencing racism and racial trauma during their doctoral studies. The analysis generated four themes that detail the…

  11. Vicarious Futurity, Hope, and Well-Being in Parents of Children with Autism Spectrum Disorder

    Science.gov (United States)

    Faso, Daniel J.; Neal-Beevers, A. Rebecca; Carlson, Caryn L.

    2013-01-01

    Hope is shown to provide resiliency for parents of children with autism spectrum disorders (ASDs) against the negative effects related to extreme parenting stressors. The broad positivity of hope may overlook opposing parental feelings about their child that may be important for well-being. Vicarious futurity (VF) is the hope and despair a parent…

  12. Vicarious Changes in Children's Preferences: A Reward or a Cognitive Phenomenon?

    Science.gov (United States)

    Zimmerman, Barry J.

    This study compared children's dependence on situational cues by a model to their reliance on the general affective valence of the model, in order to assess the role of each in determining vicarious changes in preference. Subjects were forty 4-year-olds attending a day care center. Among five toys used in pilot testing, a box of clothespins was…

  13. Vicarious Group-Based Rejection : Creating a Potentially Dangerous Mix of Humiliation, Powerlessness, and Anger

    NARCIS (Netherlands)

    Veldhuis, Tinka M.; Gordijn, Ernestine H.; Veenstra, Rene; Lindenberg, Siegwart

    2014-01-01

    Rejection can convey that one is seen as inferior and not worth bothering with. Is it possible for people to feel vicariously rejected in this sense and have reactions that are similar to those following personal rejection, such as feeling humiliated, powerless, and angry? A study on personal reject

  14. Modeling processes in the acquisition of fears: vicarious electrodermal conditioning to fear-relevant stimuli.

    Science.gov (United States)

    Hygge, S; Ohman, A

    1978-03-01

    Fear-relevant (snakes, spiders, and rats) and fear-irrelevant (flowers, mushrooms, and berries) pictures were compared as conditioned and instigating stimuli in a vicarious classical conditioning paradigm with skin conductance responses as the dependent variable. A female confederate model and subject watched the pictures side by side. A female stimulus presentations, the experimenter interrupted to investigate alleged overreactions of the model to one of the stimulus classes. The model then vividly described a phobia for this object, which was to serve as a vicarious instigating stimulus. The experiment continued for a few conditioning trials, and then the experimenter announced that the disturbing stimulus would be omitted before the second part of the experiment. There was no effect of stimulus content on vicariously instigated responses, although significant overall instigation was observed. However, the responses to the stimulus that was paired with the model's phobic stimulus, that is, the vicariously conditioned responses, failed to extinguish during the second part of the experiment when it was fear-relevant but extinguished immediately when it was fear-irrelevant.

  15. Does Vicarious Instigation Provide Support for Observational Learning Theories? A Critical Review.

    Science.gov (United States)

    Green, Gina; Osborne, J. Grayson

    1985-01-01

    Examines the theories of Aronfreed, Bandura, Berger, and Hygge. Also reviews experimental evidence published since 1962 which supports theories of observational learning of emotional behavior. While the theories posit that different conditions are necessary to vicarious instigation, most research does not test the theories in any direct way.…

  16. Vicarious Group-Based Rejection : Creating a Potentially Dangerous Mix of Humiliation, Powerlessness, and Anger

    NARCIS (Netherlands)

    Veldhuis, Tinka M.; Gordijn, Ernestine H.; Veenstra, Rene; Lindenberg, Siegwart

    2014-01-01

    Rejection can convey that one is seen as inferior and not worth bothering with. Is it possible for people to feel vicariously rejected in this sense and have reactions that are similar to those following personal rejection, such as feeling humiliated, powerless, and angry? A study on personal

  17. Somatic and vicarious pain are represented by dissociable multivariate brain patterns.

    Science.gov (United States)

    Krishnan, Anjali; Woo, Choong-Wan; Chang, Luke J; Ruzic, Luka; Gu, Xiaosi; López-Solà, Marina; Jackson, Philip L; Pujol, Jesús; Fan, Jin; Wager, Tor D

    2016-06-14

    Understanding how humans represent others' pain is critical for understanding pro-social behavior. 'Shared experience' theories propose common brain representations for somatic and vicarious pain, but other evidence suggests that specialized circuits are required to experience others' suffering. Combining functional neuroimaging with multivariate pattern analyses, we identified dissociable patterns that predicted somatic (high versus low: 100%) and vicarious (high versus low: 100%) pain intensity in out-of-sample individuals. Critically, each pattern was at chance in predicting the other experience, demonstrating separate modifiability of both patterns. Somatotopy (upper versus lower limb: 93% accuracy for both conditions) was also distinct, located in somatosensory versus mentalizing-related circuits for somatic and vicarious pain, respectively. Two additional studies demonstrated the generalizability of the somatic pain pattern (which was originally developed on thermal pain) to mechanical and electrical pain, and also demonstrated the replicability of the somatic/vicarious dissociation. These findings suggest possible mechanisms underlying limitations in feeling others' pain, and present new, more specific, brain targets for studying pain empathy.

  18. Supervision and the Management of Vicarious Traumatisation among Australian Telephone and Online Counsellors

    Science.gov (United States)

    Furlonger, Brett; Taylor, Wendy

    2013-01-01

    The present study investigated the effects of supervision on the management of vicarious traumatisation among telephone and online counsellors on BoysTown Helplines. BoysTown Helplines include Kids Helpline, a 24-hour national counselling service for young people aged 5-25 years of age, and Parentline (PL), a counselling service for parents in…

  19. A Review of Vicarious Traumatisation and Supervision among Australian Telephone and Online Counsellors

    Science.gov (United States)

    Taylor, Wendy; Furlonger, Brett

    2011-01-01

    Literature with a focus on telephone and online counselling is reviewed as this form of counselling is becoming increasingly popular in Australia. The relevance and drawbacks of counselling in these two digital environments are detailed. Of the drawbacks, vicarious traumatisation (VT) is given a particular focus as its effects on counsellor…

  20. Effects of vicarious pain on self-pain perception: investigating the role of awareness

    Directory of Open Access Journals (Sweden)

    Terrighena EL

    2017-07-01

    Full Text Available Esslin L Terrighena,1,2 Ge Lu,1 Wai Ping Yuen,1 Tatia M C Lee,1–4 Kati Keuper1,2,5 1Department of Psychology, Laboratory of Neuropsychology, The University of Hong Kong, Hong Kong; 2Laboratory of Social Cognitive Affective Neuroscience, The University of Hong Kong, Hong Kong; 3The State Key Laboratory of Brain and Cognitive Sciences, Hong Kong; 4Institute of Clinical Neuropsychology, The University of Hong Kong, Hong Kong; 5Institute for Biomagnetism and Biosignalanalysis, University of Münster, Münster, Germany Abstract: The observation of pain in others may enhance or reduce self-pain, yet the boundary conditions and factors that determine the direction of such effects are poorly understood. The current study set out to show that visual stimulus awareness plays a crucial role in ­determining whether vicarious pain primarily activates behavioral defense systems that enhance pain sensitivity and stimulate withdrawal or appetitive systems that attenuate pain sensitivity and stimulate approach. We employed a mixed factorial design with the between-subject factors exposure time (subliminal vs optimal and vicarious pain (pain vs no pain images, and the within-subject factor session (baseline vs trial to investigate how visual awareness of vicarious pain images affects subsequent self-pain in the cold-pressor test. Self-pain tolerance, intensity and unpleasantness were evaluated in a sample of 77 healthy participants. Results revealed ­significant interactions of exposure time and vicarious pain in all three dependent measures. In the presence of visual awareness (optimal condition, vicarious pain compared to no-pain elicited overall enhanced self-pain sensitivity, indexed by reduced pain tolerance and enhanced ratings of pain intensity and unpleasantness. Conversely, in the absence of visual awareness (subliminal condition, vicarious pain evoked decreased self-pain intensity and unpleasantness while pain tolerance remained unaffected. These

  1. Ørsted Pre-Flight Magnetometer Calibration Mission

    DEFF Research Database (Denmark)

    Risbo, T.; Brauer, Peter; Merayo, José M.G.

    2003-01-01

    The compact spherical coil (CSC) vector-feedback magnetometer on the Danish circle dividersted geomagnetic mapping satellite underwent extensive calibrations and verifications prior to integration and launch. The theory of the 'thin shell' calibration procedure is introduced. Spherical harmonic m...

  2. Landsat-7 ETM+ On-Orbit Radiometric Calibration

    Science.gov (United States)

    Markham, Brian L.; Kaita, Ed; Miller, Jeff; Barsi, Julia; Smith, David E. (Technical Monitor)

    2000-01-01

    As of July, 2000 the Enhanced Thematic Mapper Plus (ETM+) sensor on Landsat-7 has been operating on-orbit for about 15 months. The ETM+ images the Earth in has eight spectral bands in the visible, near-infrared (IR), short wavelength infrared (SWIR), and thermal portions of the spectrum. Three on-board calibration systems are available for the reflective bands: (1) the Internal Calibrator (IC), (2) the Partial Aperture Solar Calibrator (PASC), and (3) the Full Aperture Solar Calibrator (FASC). The Internal Calibrator also provides the thermal band calibration. Several investigators on the Landsat science team are also regularly performing vicarious calibrations. The internal calibrator, which during much of the pre-launch testing and early on-orbit check out period, showed up to 15% variability with time, has since stabilized as the instrument has assumed a regular schedule of operations and is now typically showing only a few percent variation with time, mostly associated with warm-up. The PASC has been the most variable of the sources: the response to the PASC has increased by as much as 50% is some bands and is oscillating with time, perhaps due to contamination. The FASC has been the most stable of the sources: mid scan response to the FASC diffuser have varied from -4%/yr for band 4 (0.83 microns) to -2%/yr for band 1 (0.49 microns) to +1%/yr for band 7 (2.2 microns). These decreases in response in bands 1-4 would have been about half as large if measured on the right (west) side of the panel and about twice as large if measured on the left side of the panel. The current interpretation is that the FASC diffuser panel is changing non-uniformly in its reflectance characteristics. Vicarious ground measurements have generally been consistent with the pre-launch measurements of the instrument responsivity and have not shown evidence of a change in responsivity with time. The FASC, IC, and vicarious results suggest the instrument has not changed by more than two

  3. The Phylogeny and Biogeographic History of Ashes (Fraxinus, Oleaceae) Highlight the Roles of Migration and Vicariance in the Diversification of Temperate Trees

    Science.gov (United States)

    Hinsinger, Damien Daniel; Basak, Jolly; Gaudeul, Myriam; Cruaud, Corinne; Bertolino, Paola; Frascaria-Lacoste, Nathalie; Bousquet, Jean

    2013-01-01

    The cosmopolitan genus Fraxinus, which comprises about 40 species of temperate trees and shrubs occupying various habitats in the Northern Hemisphere, represents a useful model to study speciation in long-lived angiosperms. We used nuclear external transcribed spacers (nETS), phantastica gene sequences, and two chloroplast loci (trnH-psbA and rpl32-trnL) in combination with previously published and newly obtained nITS sequences to produce a time-calibrated multi-locus phylogeny of the genus. We then inferred the biogeographic history and evolution of floral morphology. An early dispersal event could be inferred from North America to Asia during the Oligocene, leading to the diversification of the section Melioides sensus lato. Another intercontinental dispersal originating from the Eurasian section of Fraxinus could be dated from the Miocene and resulted in the speciation of F. nigra in North America. In addition, vicariance was inferred to account for the distribution of the other Old World species (sections Sciadanthus, Fraxinus and Ornus). Geographic speciation likely involving dispersal and vicariance could also be inferred from the phylogenetic grouping of geographically close taxa. Molecular dating suggested that the initial divergence of the taxonomical sections occurred during the middle and late Eocene and Oligocene periods, whereas diversification within sections occurred mostly during the late Oligocene and Miocene, which is consistent with the climate warming and accompanying large distributional changes observed during these periods. These various results underline the importance of dispersal and vicariance in promoting geographic speciation and diversification in Fraxinus. Similarities in life history, reproductive and demographic attributes as well as geographical distribution patterns suggest that many other temperate trees should exhibit similar speciation patterns. On the other hand, the observed parallel evolution and reversions in floral

  4. Vicarious resilience in counselors of child and youth victims of interpersonal trauma.

    Science.gov (United States)

    Silveira, Fabiane S; Boyer, Wanda

    2015-04-01

    In this study, we investigated how bearing witness to clients' resilience processes during treatment impacts the personal and professional lives of counselors who work with child and youth victims of interpersonal trauma. We used a qualitative instrumental multiple-case study design and thematic analysis to explore the research question. The participants indicated that they experienced an increased sense of hope and optimism, and were inspired by the strengths of their clients while working with this population. As the participants reflected on the challenges that their clients faced, the participants put their own challenges and strengths into perspective; they reported positive changes in their personal relationships. We suggest that future research might investigate the relationships we found between optimism, hope, and vicarious resilience processes, as well as the potential relationship between the counseling approach that counselors adopt and the development of vicarious resilience responses. © The Author(s) 2014.

  5. SLC-off Landsat-7 ETM+ reflective band radiometric calibration

    Science.gov (United States)

    Markham, B.L.; Barsi, J.A.; Thome, K.J.; Barker, J.L.; Scaramuzza, P.L.; Helder, D.L.; ,

    2005-01-01

    Since May 31, 2003, when the scan line corrector (SLC) on the Landsat-7 ETM+ failed, the primary foci of Landsat-7 ETM+ analyses have been on understanding and attempting to fix the problem and later on developing composited products to mitigate the problem. In the meantime, the Image Assessment System personnel and vicarious calibration teams have continued to monitor the radiometric performance of the ETM+ reflective bands. The SLC failure produced no measurable change in the radiometric calibration of the ETM+ bands. No trends in the calibration are definitively present over the mission lifetime, and, if present, are less than 0.5% per year. Detector 12 in Band 7 dropped about 0.5% in response relative to the rest of the detectors in the band in May 2004 and recovered back to within 0.1% of its initial relative gain in October 2004.

  6. Vicarious learning and unlearning of fear in childhood via mother and stranger models.

    Science.gov (United States)

    Dunne, Güler; Askew, Chris

    2013-10-01

    Evidence shows that anxiety runs in families. One reason may be that children are particularly susceptible to learning fear from their parents. The current study compared children's fear beliefs and avoidance preferences for animals following positive or fearful modeling by mothers and strangers in vicarious learning and unlearning procedures. Children aged 6 to 10 years (N = 60) were exposed to pictures of novel animals either alone (control) or together with pictures of their mother or a stranger expressing fear or happiness. During unlearning (counterconditioning), children saw each animal again with their mother or a stranger expressing the opposite facial expression. Following vicarious learning, children's fear beliefs increased for animals seen with scared faces and this effect was the same whether fear was modeled by mothers or strangers. Fear beliefs and avoidance preferences decreased following positive counterconditioning and increased following fear counterconditioning. Again, learning was the same whether the model was the child's mother or a stranger. These findings indicate that children in this age group can vicariously learn and unlearn fear-related cognitions from both strangers and mothers. This has implications for our understanding of fear acquisition and the development of early interventions to prevent and reverse childhood fears and phobias.

  7. Identifying, Preventing, and Addressing Job Burnout and Vicarious Burnout for Social Work Professionals.

    Science.gov (United States)

    Wilson, Felicia

    2016-01-01

    Genuineness, concern for others, and empathy are characteristics used to describe the professional social worker. To this end, the social worker tirelessly works on behalf of and in collaboration with the client to move them from stagnant life situations into positive life situations. While the fundamental principles of social work are wonderful, the result for some workers is job burnout and/or vicarious trauma. The concepts of job burnout, its antecedents, and manifestations are thoroughly discussed in this article to provide a holistic overview of this phenomenon. The six antecedents: workload, control, values, fairness, reward, and community are discussed and linked to the manifestations of job burnout. When working with individuals who have been exposed to the depravity of life, the professional can take on the client's vulnerabilities, victimizations, and stress. The common term for this phenomenon is vicarious trauma. Professionals who work with trauma victims can often have issues in their personal and professional life as evidenced by reduced professional efficacy, increased emotional concerns, and physical concerns. The purpose of the author in this article is to provide an overview of job burnout, vicarious trauma, and a discussion about self-care responsibilities.

  8. Both Direct and Vicarious Experiences of Nature Affect Children’s Willingness to Conserve Biodiversity

    Directory of Open Access Journals (Sweden)

    Masashi Soga

    2016-05-01

    Full Text Available Children are becoming less likely to have direct contact with nature. This ongoing loss of human interactions with nature, the extinction of experience, is viewed as one of the most fundamental obstacles to addressing global environmental challenges. However, the consequences for biodiversity conservation have been examined very little. Here, we conducted a questionnaire survey of elementary schoolchildren and investigated effects of the frequency of direct (participating in nature-based activities and vicarious experiences of nature (reading books or watching TV programs about nature and talking about nature with parents or friends on their affective attitudes (individuals’ emotional feelings toward and willingness to conserve biodiversity. A total of 397 children participated in the surveys in Tokyo. Children’s affective attitudes and willingness to conserve biodiversity were positively associated with the frequency of both direct and vicarious experiences of nature. Path analysis showed that effects of direct and vicarious experiences on children’s willingness to conserve biodiversity were mediated by their affective attitudes. This study demonstrates that children who frequently experience nature are likely to develop greater emotional affinity to and support for protecting biodiversity. We suggest that children should be encouraged to experience nature and be provided with various types of these experiences.

  9. Both Direct and Vicarious Experiences of Nature Affect Children’s Willingness to Conserve Biodiversity

    Science.gov (United States)

    Soga, Masashi; Gaston, Kevin J.; Yamaura, Yuichi; Kurisu, Kiyo; Hanaki, Keisuke

    2016-01-01

    Children are becoming less likely to have direct contact with nature. This ongoing loss of human interactions with nature, the extinction of experience, is viewed as one of the most fundamental obstacles to addressing global environmental challenges. However, the consequences for biodiversity conservation have been examined very little. Here, we conducted a questionnaire survey of elementary schoolchildren and investigated effects of the frequency of direct (participating in nature-based activities) and vicarious experiences of nature (reading books or watching TV programs about nature and talking about nature with parents or friends) on their affective attitudes (individuals’ emotional feelings) toward and willingness to conserve biodiversity. A total of 397 children participated in the surveys in Tokyo. Children’s affective attitudes and willingness to conserve biodiversity were positively associated with the frequency of both direct and vicarious experiences of nature. Path analysis showed that effects of direct and vicarious experiences on children’s willingness to conserve biodiversity were mediated by their affective attitudes. This study demonstrates that children who frequently experience nature are likely to develop greater emotional affinity to and support for protecting biodiversity. We suggest that children should be encouraged to experience nature and be provided with various types of these experiences. PMID:27231925

  10. Coordinated activation of premotor and ventromedial prefrontal cortices during vicarious reward.

    Science.gov (United States)

    Shimada, Sotaro; Matsumoto, Madoka; Takahashi, Hidefumi; Yomogida, Yukihito; Matsumoto, Kenji

    2016-03-01

    The vicarious reward we receive from watching likable others obtaining a positive outcome is a pervasive phenomenon, yet its neural correlates are poorly understood. Here, we conducted a series of functional magnetic resonance imaging experiments to test the hypothesis that the brain areas responsible for action observation and reward processing work in a coordinated fashion during vicarious reward. In the first experiment (manipulation phase), the participant was instructed to cheer for a particular player in a two-player competitive game (Rock-Paper-Scissors). This manipulation made participants feel more unity with that player and resulted in unity-related activation in the premotor area during action observation. In the following main experiment, the participant witnessed the previously cheered-for or non-cheered-for player succeed in a new solitary game (a stopwatch game). The ventromedial prefrontal cortex (vmPFC) was activated when the cheered-for player succeeded in the game but not when the other player did. Interestingly, this vmPFC activation was functionally connected with premotor activation only during the cheered-for player's success. These results suggest that vicarious reward is processed in the vmPFC-premotor network, which is activated specifically by the success of the other person with whom the individual feels unity and closeness.

  11. Landsat-8 Operational Land Imager Radiometric Calibration and Stability

    Directory of Open Access Journals (Sweden)

    Brian Markham

    2014-12-01

    Full Text Available The Landsat-8 Operational Land Imager (OLI was radiometrically calibrated prior to launch in terms of spectral radiance, using an integrating sphere source traceable to National Institute of Standards and Technology (NIST standards of spectral irradiance. It was calibrated on-orbit in terms of reflectance using diffusers characterized prior to launch using NIST traceable standards. The radiance calibration was performed with an uncertainty of ~3%; the reflectance calibration to an uncertainty of ~2%. On-orbit, multiple calibration techniques indicate that the sensor has been stable to better than 0.3% to date, with the exception of the shortest wavelength band, which has degraded about 1.0%. A transfer to orbit experiment conducted using the OLI’s heliostat-illuminated diffuser suggests that some bands increased in sensitivity on transition to orbit by as much as 5%, with an uncertainty of ~2.5%. On-orbit comparisons to other instruments and vicarious calibration techniques show the radiance (without a transfer to orbit adjustment, and reflectance calibrations generally agree with other instruments and ground measurements to within the uncertainties. Calibration coefficients are provided with the data products to convert to either radiance or reflectance units.

  12. Updated radiometric calibration for the Landsat-5 thematic mapper reflective bands

    Science.gov (United States)

    Helder, D.L.; Markham, B.L.; Thome, K.J.; Barsi, J.A.; Chander, G.; Malla, R.

    2008-01-01

    The Landsat-5 Thematic Mapper (TM) has been the workhorse of the Landsat system. Launched in 1984, it continues collecting data through the time frame of this paper. Thus, it provides an invaluable link to the past history of the land features of the Earth's surface, and it becomes imperative to provide an accurate radiometric calibration of the reflective bands to the user community. Previous calibration has been based on information obtained from prelaunch, the onboard calibrator, vicarious calibration attempts, and cross-calibration with Landsat-7. Currently, additional data sources are available to improve this calibration. Specifically, improvements in vicarious calibration methods and development of the use of pseudoinvariant sites for trending provide two additional independent calibration sources. The use of these additional estimates has resulted in a consistent calibration approach that ties together all of the available calibration data sources. Results from this analysis indicate a simple exponential, or a constant model may be used for all bands throughout the lifetime of Landsat-5 TM. Where previously time constants for the exponential models were approximately one year, the updated model has significantly longer time constants in bands 1-3. In contrast, bands 4, 5, and 7 are shown to be best modeled by a constant. The models proposed in this paper indicate calibration knowledge of 5% or better early in life, decreasing to nearly 2% later in life. These models have been implemented at the U.S. Geological Survey Earth Resources Observation and Science (EROS) and are the default calibration used for all Landsat TM data now distributed through EROS. ?? 2008 IEEE.

  13. Lessons Learned from GOSAT; Instrument Design, Calibration, Operation, Data Processing, and International Collaboration

    Science.gov (United States)

    Kuze, A.; Suto, H.; Shiomi, K.; Nakajima, M.

    2012-12-01

    Advantage of satellite observation is its ability to monitor long term and global distribution with a single instrument. Ozone observation from space has been successful for long term monitoring purposes. Monitoring gradual increase and distribution of greenhouse gases in the troposphere with sub-percent accuracy has become a challenging subject. Interference of cloud and aerosol in radiative transfer has to be corrected for troposphere measurement. Accurate O2-A band measurement can retrieve surface pressure and aerosol distribution property. We have selected a Fourier Transform spectrometer (FTS) to achieve high throughput and wide spectral coverage with uniform spectral resolution. On the other hand, it is difficult to modulate short wave such as 0.76μm and avoid micro vibration interference. Prelaunch, we took special care to select optical components of excellent surface quality and isolate vibration. Design parameters such as IFOV, spectral resolution, observation interval within limited satellite resources must be carefully optimized. Greenhouse gases Observing SATellite (GOSAT) has been providing global high spectral resolution data for almost 4 years. Instrument performance, radiometric calibration, radiative transfer calculation and laboratory spectroscopy are all important. The first step was to reduce bias of column-averaged dry air mole fractions (the Level 2 product) of CO2 and CH4 (XCO2 and XCH4) and validate using well calibrated data such as TCCON. After 2 years of operation, latitudinal distribution of zonal mean and seasonal variation at these sites can be measured with better than 2ppm accuracy. However, validations are limited to ideal conditions. Next step is to evaluate consistency of measured values from long periods since launch, different surface types, and various input radiance with different instrument gain. For long term radiometric calibration, we have uses vicarious, onboard solar diffuser, and lunar calibration data. Over the ocean

  14. Out of Arabia: A Complex Biogeographic History of Multiple Vicariance and Dispersal Events in the Gecko Genus Hemidactylus (Reptilia: Gekkonidae)

    Science.gov (United States)

    Šmíd, Jiří; Carranza, Salvador; Kratochvíl, Lukáš; Gvoždík, Václav; Nasher, Abdul Karim; Moravec, Jiří

    2013-01-01

    The geological history of the Arabian Peninsula has played a crucial role in shaping current diversity and distribution patterns of many Arabian and African faunal elements. The gecko genus Hemidactylus is not an exception. In this study, we provide an insight into the phylogeny and systematics of 45 recognized species of the so-called Arid clade of the genus Hemidactylus from Arabia, the Horn of Africa, the Levant and Iran. The material comprises 358 specimens sequenced for up to two mitochondrial (12S rRNA, cytochrome b) and four nuclear (mc1r, cmos, rag1, rag2) genes with 4766 bp of the concatenated alignment length. A robust calibrated phylogeny and reconstruction of historical biogeography are inferred. We link the history of this genus with major geological events that occurred in the region within the last 30 million years. Two basal divergences correspond with the break-ups of the Arabian and African landmasses and subsequent separation of Socotra from the Arabian mainland, respectively, segregating the genus by means of vicariance. Formation of the Red Sea led to isolation and subsequent radiation in the Arabian Peninsula, which was followed by multiple independent expansions: 13.1 Ma to Iran; 9.8 Ma to NE Africa; 8.2 to Socotra Archipelago; 7–7.3 Ma two colonizations to the Near East; 5.9 Ma to NE Africa; and 4.1 to Socotra. Moreover, using multiple genetic markers we detected cryptic diversity within the genus, particularly in south-western Arabia and the Ethiopian highlands, and confirmed the existence of at least seven new species in the area. These findings highlight the role of Arabia and the Horn of Africa as an important Hemidactylus diversity hotspot. PMID:23724016

  15. Out of Arabia: a complex biogeographic history of multiple vicariance and dispersal events in the gecko genus Hemidactylus (Reptilia: Gekkonidae).

    Science.gov (United States)

    Smíd, Jiří; Carranza, Salvador; Kratochvíl, Lukáš; Gvoždík, Václav; Nasher, Abdul Karim; Moravec, Jiří

    2013-01-01

    The geological history of the Arabian Peninsula has played a crucial role in shaping current diversity and distribution patterns of many Arabian and African faunal elements. The gecko genus Hemidactylus is not an exception. In this study, we provide an insight into the phylogeny and systematics of 45 recognized species of the so-called Arid clade of the genus Hemidactylus from Arabia, the Horn of Africa, the Levant and Iran. The material comprises 358 specimens sequenced for up to two mitochondrial (12S rRNA, cytochrome b) and four nuclear (mc1r, cmos, rag1, rag2) genes with 4766 bp of the concatenated alignment length. A robust calibrated phylogeny and reconstruction of historical biogeography are inferred. We link the history of this genus with major geological events that occurred in the region within the last 30 million years. Two basal divergences correspond with the break-ups of the Arabian and African landmasses and subsequent separation of Socotra from the Arabian mainland, respectively, segregating the genus by means of vicariance. Formation of the Red Sea led to isolation and subsequent radiation in the Arabian Peninsula, which was followed by multiple independent expansions: 13.1 Ma to Iran; 9.8 Ma to NE Africa; 8.2 to Socotra Archipelago; 7-7.3 Ma two colonizations to the Near East; 5.9 Ma to NE Africa; and 4.1 to Socotra. Moreover, using multiple genetic markers we detected cryptic diversity within the genus, particularly in south-western Arabia and the Ethiopian highlands, and confirmed the existence of at least seven new species in the area. These findings highlight the role of Arabia and the Horn of Africa as an important Hemidactylus diversity hotspot.

  16. Astrid-2 EMMA Magnetic Calibration

    DEFF Research Database (Denmark)

    Merayo, José M.G.; Brauer, Peter; Risbo, Torben

    1998-01-01

    The Swedish micro-satellite Astrid-2 contains a tri-axial fluxgate magnetometer with the sensor co-located with a Technical University of Denmark (DTU) star camera for absolute attitude, and extended about 0.9 m on a hinged boom. The magnetometer is part of the RIT EMMA electric and magnetic fields...... experiment built as a collaboration between the DTU, Department of Automation and the Department of Plasma Physics, The Alfvenlaboratory, Royal Institute of Technology (RIT), Stockholm. The final magnetic calibration of the Astrid-2 satellite was done at the Lovoe Magnetic Observatory under the Geological...... the magnetometer orthogonalized axes and the star camera optical axes was determined from the observed stellar coordinates related to the Earth magnetic field from the Magnetic Observatory. The magnetic calibration of the magnetometer integrated into the flight configured satellite was done in the (almost...

  17. Employers' Statutory Vicarious Liability in Terms of the Protection of Personal Information Act

    Directory of Open Access Journals (Sweden)

    Daleen Millard

    2016-07-01

    Full Text Available A person whose privacy has been infringed upon through the unlawful, culpable processing of his or her personal information can sue the infringer's employer based on vicarious liability or institute action based on the Protection of Personal Information Act 4 of 2013 (POPI. Section 99(1 of POPI provides a person (a "data subject" whose privacy has been infringed upon with the right to institute a civil action against the responsible party. POPI defines the responsible party as the person who determines the purpose of and means for the processing of the personal information of data subjects. Although POPI does not equate a responsible party to an employer, the term "responsible party" is undoubtedly a synonym for "employer" in this context. By holding an employer accountable for its employees' unlawful processing of a data subject's personal information, POPI creates a form of statutory vicarious liability. Since the defences available to an employer at common law and developed by case law differ from the statutory defences available to an employer in terms of POPI, it is necessary to compare the impact this new statute has on employers. From a risk perspective, employers must be aware of the serious implications of POPI. The question that arises is whether the Act perhaps takes matters too far. This article takes a critical look at the statutory defences available to an employer in vindication of a vicarious liability action brought by a data subject in terms of section 99(1 of POPI. It compares the defences found in section 99(2 of POPI and the common-law defences available to an employer fending off a delictual claim founded on the doctrine of vicarious liability. To support the argument that the statutory vicarious liability created by POPI is too harsh, the defences contained in section 99(2 of POPI are further analogised with those available to an employer in terms of section 60(4 of the Employment Equity Act 55 of 1998 (EEA and other

  18. Calibration of the National Ecological Observatory Network's Airborne Imaging Spectrometers

    Science.gov (United States)

    Leisso, N.; Kampe, T. U.; Karpowicz, B. M.

    2014-12-01

    The National Ecological Observatory Network (NEON) is currently under construction by the National Science Foundation. NEON is designed to collect data on the causes and responses to change in the observed ecosystem. The observatory will combine site data collected by terrestrial, instrumental, and aquatic observation systems with airborne remote sensing data. The Airborne Observation Platform (AOP) is designed to collect high-resolution aerial imagery, waveform and discrete LiDAR, and high-fidelity imaging spectroscopic data over the NEON sites annually at or near peak-greenness. Three individual airborne sensor packages will be installed in leased Twin Otter aircraft and used to the collect the NEON sites as NEON enters operations. A key driver to the derived remote sensing data products is the calibration of the imaging spectrometers. This is essential to the overall NEON mission to detect changes in the collected ecosystems over the 30-year expected lifetime. The NEON Imaging Spectrometer (NIS) is a Visible and Shortwave Infrared (VSWIR) grating spectrometer designed by NASA JPL. Spectroscopic data is collected at 5-nm intervals from 380-2500-nm. A single 480 by 640 pixel HgCdTe Focal Plane Array collects dispersed light from a grating tuned for efficiency across the solar-reflective utilized in a push-broom configuration. Primary calibration of the NIS consists of the characterizing the FPA behavior, spectral calibration, and radiometric calibration. To this end, NEON is constructing a Sensor Test Facility to calibrate the NEON sensors. This work discusses the initial NIS laboratory calibration and verification using vicarious calibration techniques during operations. Laboratory spectral calibration is based on well-defined emission lines in conjunction with a scanning monochromator to define the individual spectral response functions. A NIST traceable FEL bulb is used to radiometrically calibrate the imaging spectrometer. An On-board Calibration (OBC) system

  19. Astrid-2 EMMA Magnetic Calibration

    DEFF Research Database (Denmark)

    Merayo, José M.G.; Brauer, Peter; Risbo, Torben

    1998-01-01

    experiment built as a collaboration between the DTU, Department of Automation and the Department of Plasma Physics, The Alfvenlaboratory, Royal Institute of Technology (RIT), Stockholm. The final magnetic calibration of the Astrid-2 satellite was done at the Lovoe Magnetic Observatory under the Geological...... of the magnetometer readings in each position were related to the field magnitudes from the Observatory, and a least squares fit for the 9 magnetometer calibration parameters was performed (3 offsets, 3 scale values and 3 inter-axes angles). After corrections for the magnetometer digital-to-analogue converters...... fit calibration parameters. Owing to time shortage, we did not evaluate the temperature coefficients of the flight sensor calibration parameters. However, this was done for an identical flight spare magnetometer sensor at the magnetic coil facility belonging to the Technical University of Braunschweig...

  20. Calibration approach and plan for the sea and land surface temperature radiometer

    Science.gov (United States)

    Smith, David L.; Nightingale, Tim J.; Mortimer, Hugh; Middleton, Kevin; Edeson, Ruben; Cox, Caroline V.; Mutlow, Chris T.; Maddison, Brian J.; Coppo, Peter

    2014-01-01

    The sea and land surface temperature radiometer (SLSTR) to be flown on the European Space Agency's (ESA) Sentinel-3 mission is a multichannel scanning radiometer that will continue the 21 year dataset of the along-track scanning radiometer (ATSR) series. As its name implies, measurements from SLSTR will be used to retrieve global sea surface temperatures to an uncertainty of SLSTR instrument, the infrared calibration sources, and the alignment equipment. The calibration rig has been commissioned and results of these tests will be presented. Finally, the authors will present the planning for the on-orbit monitoring and calibration activities to ensure that the calibration is maintained. These activities include vicarious calibration techniques that have been developed through previous missions and the deployment of ship-borne radiometers.

  1. The multilevel organization of vicarious pain responses: effects of pain cues and empathy traits on spinal nociception and acute pain.

    Science.gov (United States)

    Vachon-Presseau, Etienne; Martel, Marc O; Roy, Mathieu; Caron, Etienne; Jackson, Philip L; Rainville, Pierre

    2011-07-01

    The shared-representation model of empathy suggests that vicarious pain processes rely partly on the activation of brain systems underlying self-pain in the observer. Here, we tested the hypothesis that self-pain may be facilitated by the vicarious priming of neural systems underlying pain perception. Pictures illustrating painful agents applied to the hand or the foot (sensory information), or painful facial expressions (emotional information) were shown to 43 participants to test the effects of vicarious pain on the nociceptive flexion reflex (NFR) of the lower limb and pain intensity and unpleasantness produced by transcutaneous electrical stimulation applied over the sural nerve. Results confirmed the expected priming effects of vicarious pain on spinal and perceptual processes. However, for comparable pain intensity and arousal evoked by the pain pictures, the facilitation of the NFR and the self-pain unpleasantness measurements was more robust in response to pictures depicting pain sensory compared to emotional information. Furthermore, the facilitation of the NFR by pain pictures was positively correlated with the empathy trait of the observer. In contrast, the change in perceived shock-pain intensity was negatively correlated with empathic traits. This dissociation implies that low-level vicarious priming processes underlying pain facilitation may be downregulated at higher pain-processing stages in individuals reporting higher levels of empathy. We speculate that this process contributes to reducing self-other assimilation and is necessary to adopt higher-order empathic responses and altruistic behaviors.

  2. Satellite Calibration Data. Annual Data Report - 1977

    Science.gov (United States)

    1979-08-01

    99200 481/f 11133 449// 22100 383/f IROCKETSONDE: (1210 MOT) RRXX 18181 72269 81010 63101 25552 05003 30539 14605 33534 27002 35528 09008 38516 11007...GMT FT METSAT I-A METSAT I-Bf METSAT I I NEUT AT IIl KTSAT IV T12.2 14.0 dW2.0 1.3 Pd’ s 10 2.2 calm C 25.69 26.20 TM ISO ®( 01a2S INo No I 46.88 I47.62

  3. In situ calibration using satellite data results

    Directory of Open Access Journals (Sweden)

    Antonia M. Varela

    2007-01-01

    Full Text Available Se presentan simulaciones numéricas de lujo de aire sobre varios sitios potenciales para emplazamiento de futuros telescopios. De las simulaciones se deriva información como la velocidad del viento y los perfiles de temperatura, los niveles de turbulencia (velocidad uctuante RMS, la longitud de estelas y el espesor de la capa límite. Esta información es posteriormente utilizada para modelar el seeing local, proporcionando as__ una herramienta esencial de evaluación en el proceso de selección de sitios. Se presenta la metodología para el modelo del seeing y la estrategia para configurar el dominio de la simulación. Posteriormente se presenta una compilación de simulaciones de algunos sitios posibles para proyectos de telescopios. Anteriormente, los resultados incluían la evaluación de la capa límite como una función de la velocidad y dirección del viento para un sitio dado o una comparación entre sitios vecinos cuando esto era aplicable. Como el seeing local (el seeing combinado del espejo, el domo y el terreno es afectado severamente por el desarrollo del sitio y la geometría del edificio, el enfoque de este tipo de estudios ha cambiado hacia la evaluación de las interacciones entre el ujo del aire, la topografía y las estructuras desarrolladas. Se presentan ejemplos que demuestran el valor de esta clase de simulación como una herramienta estratégica para el diseño y la operación del telescopio

  4. Microscale vicariance and diversification of Western Balkan caddisflies linked to karstification.

    Science.gov (United States)

    Previšić, Ana; Schnitzler, Jan; Kučinić, Mladen; Graf, Wolfram; Ibrahimi, Halil; Kerovec, Mladen; Pauls, Steffen U

    2014-03-01

    The karst areas in the Dinaric region of the Western Balkan Peninsula are a hotspot of freshwater biodiversity. Many investigators have examined diversification of the subterranean freshwater fauna in these karst systems. However, diversification of surface-water fauna remains largely unexplored. We assessed local and regional diversification of surface-water species in karst systems and asked whether patterns of population differentiation could be explained by dispersal-diversification processes or allopatric diversification following karst-related microscale vicariance. We analyzed mitochondrial cytochrome c oxidase subunit I (mtCOI) sequence data of 4 caddisfly species (genus Drusus) in a phylogeographic framework to assess local and regional population genetic structure and Pliocene/Pleistocene history. We used BEAST software to assess the timing of intraspecific diversification of the target species. We compared climate envelopes of the study species and projected climatically suitable areas during the last glacial maximum (LGM) to assess differences in the species climatic niches and infer potential LGM refugia. The haplotype distribution of the 4 species (324 individuals from 32 populations) was characterized by strong genetic differentiation with few haplotypes shared among populations (16%) and deep divergence among populations of the 3 endemic species, even at local scales. Divergence among local populations of endemics often exceeded divergence among regional and continental clades of the widespread D. discolor. Major divergences among regional populations dated to 2.0 to 0.5 Mya. Species distribution model projections and genetic structure suggest that the endemic species persisted in situ and diversified locally throughout multiple Pleistocene climate cycles. The pattern for D. discolor was different and consistent with multiple invasions into the region. Patterns of population genetic structure and diversification were similar for the 3 regional

  5. Atmospheric Correction and Vicarious Calibration of Oceansat-1 Ocean Color Monitor (OCM) Data in Coastal Case 2 Waters

    Science.gov (United States)

    2012-06-08

    W.; Walker, N.D. Evaluating the potential risk of microcystins to blue crab ( Callinectes sapidus ) fisheries and human health in a eutrophic estuary...risk of microcystins to blue crab ( Callinectes sapidus ) fisheries and human health in a eutrophic estuary. Harmful Algae 2010, 9, 134–143. 5. Ren

  6. Vicarious exposure to trauma and growth in therapists: the moderating effects of sense of coherence, organizational support, and empathy.

    Science.gov (United States)

    Brockhouse, Rebecca; Msetfi, Rachel M; Cohen, Keren; Joseph, Stephen

    2011-12-01

    Therapists who work with traumatized individuals can experience psychological growth following this vicarious exposure to trauma. The purpose of the present study is to examine the variables that may moderate such vicarious posttraumatic growth. Therapists (N = 118) completed measures of vicarious exposure to trauma and growth, as well as empathy, sense of coherence, and perceived organizational support. Results showed that having a strong sense of coherence negatively predicted growth (β = -.28, p = .001), whereas empathy was a positive predictor (β = .37, p exposure to growth relationship when growth involved relating to others (β = -.20; p = .018). Organizational support did not predict growth. The results have implications for the recruitment, training, and supervision of therapists working with individuals who have experienced trauma. Copyright © 2011 International Society for Traumatic Stress Studies.

  7. Satellite Communication.

    Science.gov (United States)

    Technology Teacher, 1985

    1985-01-01

    Presents a discussion of communication satellites: explains the principles of satellite communication, describes examples of how governments and industries are currently applying communication satellites, analyzes issues confronting satellite communication, links mathematics and science to the study of satellite communication, and applies…

  8. Biotic element analysis of reptiles of China: A test of vicariance model

    Institute of Scientific and Technical Information of China (English)

    Youhua CHEN

    2013-01-01

    In this contribution,I identify possible biotic elements of reptiles of China using biotic element analysis.I test whether the vicariance model could significantly shape reptilian current distribution patterns.My results show that dispersal is prevailing for reptiles in China.There are four major biotic elements in reptilian distribution,which are East Xizang,YunnanGuizhou Plateau,Taiwan and Hainan,respectively.The test of distributional areas is significantly more clustered than expected by chance,while in another test that closely related species are homogeneously distributed across biotic elements cannot be rejected.Therefore I argued that vicariance might be one of the key processes in patterning reptilian distribution in China.In addition,I develop an improved biotic element analysis in biogeographic studies,by performing biotic element analysis in an iterative manner in order to diagnose more geographically restricted elements until no noise components found.The importance of antecedent selection of distributional data for the subsequent analysis is also discussed.Besides,my study indicates that biodiversity hotspots are not fully overlapped with areas of endemism for reptilians in East Asia.

  9. Out of Africa:Miocene Dispersal, Vicariance, and Extinction within Hyacinthaceae Subfamily Urgineoideae

    Institute of Scientific and Technical Information of China (English)

    Syed Shujait Ali; Martin Pfosser; Wolfgang Wetschnig; Mario MartnezAzorn; Manuel B. Crespo; Yan Yu

    2013-01-01

    Disjunct distribution patterns in plant lineages are usually explained according to three hypotheses:vicariance, geodispersal, and long-distance dispersal. The role of these hypotheses is tested in Urgineoideae (Hyacinthaceae), a subfamily disjunctly distributed in Africa, Madagascar, India, and the Mediterranean region. The potential ancestral range, dispersal routes, and factors responsible for the current distribution in Urgineoideae are investigated using divergence time estimations. Urgineoideae originated in Southern Africa approximately 48.9 Mya. Two independent dispersal events in the Western Mediterranean region possibly occurred during Early Oligocene and Miocene (29.9-8.5 Mya) via Eastern and Northwestern Africa. A dispersal from Northwestern Africa to India could have occurred between 16.3 and 7.6 Mya. Vicariance and extinction events occurred approximately 21.6 Mya. Colonization of Madagascar occurred between 30.6 and 16.6 Mya, after a single transoceanic dispersal event from Southern Africa. The current disjunct distributions of Urgineoideae are not satisfactorily explained by Gondwana fragmentation or dispersal via boreotropical forests, due to the younger divergence time estimates. The flattened winged seeds of Urgineoideae could have played an important role in long-distance dispersal by strong winds and big storms, whereas geodispersal could have also occurred from Southern Africa to Asia and the Mediterranean region via the so-called arid and high-altitude corridors.

  10. Calibration and Validation of the InfraRed Atmospheric Sounder Onboard the FY3B Satellite%风云三号B星红外分光计的定标和验证

    Institute of Scientific and Technical Information of China (English)

    漆成莉; 陈勇; 刘辉; 吴春强; 殷德奎

    2013-01-01

    搭载于风云三号A星和B星上的红外分光计(IRAS)分别于2008年5月27日和2010年11月5日成功发射。该仪器主要提供从可见光到红外波长范围内多通道的辐射观测,并可应用于资料同化、全球大气温度和水汽廓线反演等领域。搭载于风云三号A星上的IRAS由于滤光轮转速不稳定,导致仪器观测不连续。风云三号B星上的IRAS运行正常,处于稳定的业务模式。利用仪器在轨3个月期间的资料,进行了一系列的在轨定标和验证试验,对IRAS仪器的性能进行了一系列的验证,包括冷空和暖黑体定标计数值的长期趋势、噪音等效辐射率等。利用IRAS和红外大气探测干涉仪(IASI)同时观察到的地球场景进行比较,证明了两种观测非常相似。另外,将FY3B/IRAS红外通道的观测与NOAA-19/HIRS对应的通道的辐射传输模式模拟进行了对比。对比结果显示相对于HIRS,部分IRAS红外通道,尤其是通道1到10,15,19和20偏差很小。但是少数通道,如通道13,16和18有较大的偏差。造成这些偏差的原因仍需要进一步的研究。%InfraRed Atmospheric Sounder (IRAS) instruments were successfully launched onboard the FengYun-3A (FY3A) and FengYun-3B (FY3B) satellites on May 27, 2008, and November 5, 2010, respectively. They aim at providing multichannel radiances within the spectral range of visible to infrared (IR) wavelengths for many environmental applications, including data assimilation and retrievals of global atmospheric temperature and humidity proifles. However, the velocity of the iflter wheel of the ifrst IRAS onboard FY3A is unstable and, therefore, induced a discontinuity in the measurement. The IRAS onboard FY3B works well in normal and stable operational mode since its launch without any anomaly. A variety of postlaunch calibration/validation tasks are conducted using on-orbit data during a period of three months. This paper presents

  11. Overview on calibration and validation activities for ESA's Soil Moisture and Ocean Salinity Mission

    Science.gov (United States)

    Mecklenburg, Susanne; Bouzinac, Catherine; Delwart, Steven

    2010-05-01

    The Soil Moisture and Ocean Salinity (SMOS) mission, launched on 2 November 2009, is the European Space Agency's (ESA) second Earth Explorer Opportunity mission. The scientific objectives of the SMOS mission directly respond to the current lack of global observations of soil moisture and ocean salinity, two key variables used in predictive hydrological, oceanographic and atmospheric models. SMOS observations will also provide information on the characterisation of ice and snow covered surfaces and the sea ice effect on ocean-atmosphere heat fluxes and dynamics, which affects large-scale processes of the Earth's climate system. A major undertaking in any environmental science related satellite mission are the calibration and validation activities. Calibration is an important prerequisite to the performance verification, which demonstrates that the instrument meets its requirements. It is also important for the validation of geophysical parameters, such as soil moisture and sea surface salinity. The validation of the data will be handled through a combination of ESA led activities and national efforts. The SMOS Validation and Retrieval Team (SVRT) comprises the scientific contributions that will be made by the projects selected in response to the SMOS calibration and validation Announcement of Opportunity in 2005 as well as the two level 2 Expert Support Laboratories being involved in the development of the soil moisture and sea surface salinity data products. For the validation of the soil moisture data products ESA's activities will focus on two main sites, the Valencia Anchor Station, located in the East of Spain, and the Upper Danube Catchment, located in the South of Germany. In preparation to the SMOS commissioning phase, airborne rehearsal campaigns were conducted in spring 2008 over both aforementioned key sites and will be repeated, in collaboration with the French Space Agency CNES, in spring 2010. These will be coupled with a SMOS matchup generation

  12. Landsat-7 ETM+ on-orbit reflective-band radiometric stability and absolute calibration

    Science.gov (United States)

    Markham, B.L.; Thome, K.J.; Barsi, J.A.; Kaita, E.; Helder, Dennis L.; Barker, J. L.; Scaramuzza, Pat

    2004-01-01

    Launched in April 1999, the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) instrument is in its sixth year of operation. The ETM+ instrument has been the most stable of any of the Landsat instruments. To date, the best onboard calibration source for the reflective bands has been the Full Aperture Solar Calibrator, a solar-diffuser-based system, which has indicated changes of between 1% to 2% per year in the ETM+ gain for bands 1-4 and 8 and less than 0.5%/year for bands 5 and 7. However, most of this change is believed to be caused by changes in the solar diffuser panel, as opposed to a change in the instrument's gain. This belief is based partially on vicarious calibrations and observations of "invariant sites", hyperarid sites of the Sahara and Arabia. Weighted average slopes determined from these datasets suggest changes of 0.0% to 0.4% per year for bands 1-4 and 8 and 0.4% to 0.5% per year for bands 5 and 7. Absolute calibration of the reflective bands of the ETM+ is consistent with vicarious observations and other sensors generally at the 5% level, though there appear to be some systematic differences.

  13. Learning from the Pros: Influence of Web-Based Expert Commentary on Vicarious Learning about Financial Markets

    Science.gov (United States)

    Ford, Matthew W.; Kent, Daniel W.; Devoto, Steven

    2007-01-01

    Web-based financial commentary, in which experts routinely express market-related thought processes, is proposed as a means for college students to learn vicariously about financial markets. Undergraduate business school students from a regional university were exposed to expert market commentary from a single financial Web site for a 6-week…

  14. A Comparison of Vicarious and Written Training Techniques Applied to Early Stimulation by Parents of Their Down Syndrome Babies.

    Science.gov (United States)

    Sanz, M. T.

    1996-01-01

    Compared effectiveness of vicarious and written training techniques to teach parents an early stimulation program for infants with Downs Syndrome. Found that infants whose parents were trained through observing a clinician stimulate their child had higher average developmental quotients in gross motor and language development between 6 and 24…

  15. Hybrid E-Learning Tool TransLearning: Video Storytelling to Foster Vicarious Learning within Multi-Stakeholder Collaboration Networks

    Science.gov (United States)

    van der Meij, Marjoleine G.; Kupper, Frank; Beers, Pieter J.; Broerse, Jacqueline E. W.

    2016-01-01

    E-learning and storytelling approaches can support informal vicarious learning within geographically widely distributed multi-stakeholder collaboration networks. This case study evaluates hybrid e-learning and video-storytelling approach "TransLearning" by investigation into how its storytelling e-tool supported informal vicarious…

  16. Can satellite-based monitoring techniques be used to quantify volcanic CO2 emissions?

    Science.gov (United States)

    Schwandner, Florian M.; Carn, Simon A.; Kuze, Akihiko; Kataoka, Fumie; Shiomi, Kei; Goto, Naoki; Popp, Christoph; Ajiro, Masataka; Suto, Hiroshi; Takeda, Toru; Kanekon, Sayaka; Sealing, Christine; Flower, Verity

    2014-05-01

    Since 2010, we investigate and improve possible methods to regularly target volcanic centers from space in order to detect volcanic carbon dioxide (CO2) point source anomalies, using the Japanese Greenhouse gas Observing SATellite (GOSAT). Our long-term goals are: (a) better spatial and temporal coverage of volcano monitoring techniques; (b) improvement of the currently highly uncertain global CO2 emission inventory for volcanoes, and (c) use of volcanic CO2 emissions for high altitude, strong point source emission and dispersion studies in atmospheric science. The difficulties posed by strong relief, orogenic clouds, and aerosols are minimized by a small field of view, enhanced spectral resolving power, by employing repeat target mode observation strategies, and by comparison to continuous ground based sensor network validation data. GOSAT is a single-instrument Earth observing greenhouse gas mission aboard JAXA's IBUKI satellite in sun-synchronous polar orbit. GOSAT's Fourier-Transform Spectrometer (TANSO-FTS) has been producing total column XCO2 data since January 2009, at a repeat cycle of 3 days, offering great opportunities for temporal monitoring of point sources. GOSAT's 10 km field of view can spatially integrate entire volcanic edifices within one 'shot' in precise target mode. While it doesn't have any spatial scanning or mapping capability, it does have strong spectral resolving power and agile pointing capability to focus on several targets of interest per orbit. Sufficient uncertainty reduction is achieved through comprehensive in-flight vicarious calibration, in close collaboration between NASA and JAXA. Challenges with the on-board pointing mirror system have been compensated for employing custom observation planning strategies, including repeat sacrificial upstream reference points to control pointing mirror motion, empirical individualized target offset compensation, observation pattern simulations to minimize view angle azimuth. Since summer 2010

  17. Testing comparative phylogeographic models of marine vicariance and dispersal using a hierarchical Bayesian approach

    Directory of Open Access Journals (Sweden)

    Meyer Christopher P

    2008-11-01

    Full Text Available Abstract Background Marine allopatric speciation is an enigma because pelagic larval dispersal can potentially connect disjunct populations thereby preventing reproductive and morphological divergence. Here we present a new hierarchical approximate Bayesian computation model (HABC that tests two hypotheses of marine allopatric speciation: 1. "soft vicariance", where a speciation involves fragmentation of a large widespread ancestral species range that was previously connected by long distance gene flow; and 2. peripatric colonization, where speciations in peripheral archipelagos emerge from sweepstakes colonizations from central source regions. The HABC approach analyzes all the phylogeographic datasets at once in order to make across taxon-pair inferences about biogeographic processes while explicitly allowing for uncertainty in the demographic differences within each taxon-pair. Our method uses comparative phylogeographic data that consists of single locus mtDNA sequences from multiple co-distributed taxa containing pairs of central and peripheral populations. We use the method on two comparative phylogeographic data sets consisting of cowrie gastropod endemics co-distributed in the Hawaiian (11 taxon-pairs and Marquesan archipelagos (7 taxon-pairs. Results Given the Marquesan data, we find strong evidence of simultaneous colonization across all seven cowrie gastropod endemics co-distributed in the Marquesas. In contrast, the lower sample sizes in the Hawaiian data lead to greater uncertainty associated with the Hawaiian estimates. Although, the hyper-parameter estimates point to soft vicariance in a subset of the 11 Hawaiian taxon-pairs, the hyper-prior and hyper-posterior are too similar to make a definitive conclusion. Both results are not inconsistent with what is known about the geologic history of the archipelagos. Simulations verify that our method can successfully distinguish these two histories across a wide range of conditions given

  18. Self-reported vicarious trauma in asylum evaluators: a preliminary survey.

    Science.gov (United States)

    Mishori, Ranit; Mujawar, Imran; Ravi, Nirmal

    2014-12-01

    Hundreds of clinicians in the US conduct asylum evaluations, to document evidence of torture and persecution of people fleeing their home countries. Participating in these encounters puts clinicians at risk for vicarious trauma (VT). Little research addressed VT in physicians. Even less is known about VT among asylum evaluators. A survey was distributed to members of the asylum network of Physicians for Human Rights in Spring 2012. The majority (65%) of survey participants denied having experienced VT. However, being female, being a mental health professional and having performed a greater number of evaluations was associated with a higher likelihood of reporting VT. We present preliminary data about VT in asylum evaluators. Recruiters and trainers should make every effort to address the issue and educate their volunteers about means of identifying and managing symptoms. Formal and informal support services and resources should be developed and shared with volunteers.

  19. Phylogenetic relationships of Loxosceles and Sicarius spiders are consistent with Western Gondwanan vicariance.

    Science.gov (United States)

    Binford, Greta J; Callahan, Melissa S; Bodner, Melissa R; Rynerson, Melody R; Núñez, Pablo Berea; Ellison, Christopher E; Duncan, Rebecca P

    2008-11-01

    The modern geographic distribution of the spider family Sicariidae is consistent with an evolutionary origin on Western Gondwana. Both sicariid genera, Loxosceles and Sicarius are diverse in Africa and South/Central America. Loxosceles are also diverse in North America and the West Indies, and have species described from Mediterranean Europe and China. We tested vicariance hypotheses using molecular phylogenetics and molecular dating analyses of 28S, COI, 16S, and NADHI sequences. We recover reciprocal monophyly of African and South American Sicarius, paraphyletic Southern African Loxosceles and monophyletic New World Loxosceles within which an Old World species group that includes L. rufescens is derived. These patterns are consistent with a sicariid common ancestor on Western Gondwana. North American Loxosceles are monophyletic, sister to Caribbean taxa, and resolved in a larger clade with South American Loxosceles. With fossil data this pattern is consistent with colonization of North America via a land bridge predating the modern Isthmus of Panama.

  20. Isozymes in Larrea divaricata and Larrea tridentata (Zygophyllaceae): a study of two amphitropical vicariants and autopolyploidy.

    Science.gov (United States)

    Cortes, M C; Hunziker, J H

    1997-10-01

    Electrophoretic variants for seven isozyme systems - probably encoded by 18 structural gene loci - in diploid populations of Larrea divaricata and diploid and tetraploid populations of its North American vicariant derivative L. tridentata were assayed by polyacrilamide and starch gel electrophoresis. High molecular similarity of diploid and tetraploid cytotypes of L. tridentata supports the hypothesis of interracial autopolyploidy. The absence of fixed heterozygosity and additive profiles indicates a low level of divergence between the parental diploids and the tetraploids. The phenogram based on the I coefficient showed the similarities between the populations of diploid L. divaricata and also between the diploid populations of L. tridentata. Both groups of diploid populations were more distantly connected to tetraploid L. tridentata.

  1. Not My Problem: Vicarious Conflict Adaptation with Human and Virtual Co-actors

    Science.gov (United States)

    Spapé, Michiel M.; Ravaja, Niklas

    2016-01-01

    The Simon effect refers to an incompatibility between stimulus and response locations resulting in a conflict situation and, consequently, slower responses. Like other conflict effects, it is commonly reduced after repetitions, suggesting an executive control ability, which flexibly rewires cognitive processing and adapts to conflict. Interestingly, conflict is not necessarily individually defined: the Social Simon effect refers to a scenario where two people who share a task show a conflict effect where a single person does not. Recent studies showed these observations might converge into what could be called vicarious conflict adaptation, with evidence indicating that observing someone else's conflict may subsequently reduce one's own. While plausible, there is reason for doubt: both the social aspect of the Simon Effect, and the degree to which executive control accounts for the conflict adaptation effect, have become foci of debate in recent studies. Here, we present two experiments that were designed to test the social dimension of the effect by varying the social relationship between the actor and the co-actor. In Experiment 1, participants performed a conflict task with a virtual co-actor, while the actor-observer relationship was manipulated as a function of the similarity between response modalities. In Experiment 2, the same task was performed both with a virtual and with a human co-actor, while heart-rate measurements were taken to measure the impact of observed conflict on autonomous activity. While both experiments replicated the interpersonal conflict adaptation effects, neither showed evidence of the critical social dimension. We consider the findings as demonstrating that vicarious conflict adaptation does not rely on the social relationship between the actor and co-actor. PMID:27199839

  2. Vicariance and dispersal effects on phylogeographic structure and speciation in a widespread estuarine invertebrate.

    Science.gov (United States)

    Kelly, David W; MacIsaac, Hugh J; Heath, Daniel D

    2006-02-01

    Vicariance and dispersal can strongly influence population genetic structure and allopatric speciation, but their importance in the origin of marine biodiversity is unresolved. In transitional estuarine environments, habitat discreteness and dispersal barriers could enhance divergence and provide insight to evolutionary mechanisms underlying marine and freshwater biodiversity. We examined this by assessing phylogeographic structure in the widespread amphipod Gammarus tigrinus across 13 estuaries spanning its northwest Atlantic range from Quebec to Florida. Mitochondrial cytochrome c oxidase I and nuclear internal transcribed spacer 1 phylogenies supported deep genetic structure consistent with Pliocene separation and cryptic northern and southern species. This break occurred across the Virginian-Carolinian coastal biogeographic zone, where an oceanographic discontinuity may restrict gene flow. Ten estuarine populations of the northern species occurred in four distinct clades, supportive of Pleistocene separation. Glaciation effects on genetic structure of estuarine populations are largely unknown, but analysis of molecular variance (AMOVA) supported a phylogeographic break among clades in formerly glaciated versus nonglaciated areas across Cape Cod, Massachusetts. This finding was concordant with patterns in other coastal species, though there was no significant relationship between latitude and genetic diversity. This supports Pleistocene vicariance events and divergence of clades in different northern glacial refugia. AMOVA results and private haplotypes in most populations support an allopatric distribution across estuaries. Clade mixture zones are consistent with historical colonization and human-mediated transfer. An isolation-by-distance model of divergence was detected after we excluded a suspected invasive haplotype in the St. Lawrence estuary. The occurrence of cryptic species and divergent population structure support limited dispersal, dispersed habitat

  3. Overview of calibration and validation activities for the EUMETSAT polar system: second generation (EPS-SG) visible/infrared imager (METimage)

    Science.gov (United States)

    Phillips, P.; Bonsignori, R.; Schlüssel, P.; Schmülling, F.; Spezzi, L.; Watts, P.; Zerfowski, I.

    2016-10-01

    nadir overpasses and comparisons with ground based observations, analysis of algorithm internal diagnostics to confirm retrieval performance for geophysical products and vicarious calibration to assist with validation of the instrument on-board calibration. Any identified deficiencies in the products will lead to either an update any auxiliary data sets (e.g. calibration key data) that are used to configure the product processors or to a revision of algorithms themselves. The Cal/Val activities are mostly foreseen during commissioning but will inevitably extend to routine operations in order to take on board seasonal variations and ensure long term stability of the calibrated radiances and geophysical products. Pre-requisite to validation of products at scientific level is that the satellite and instrument itself have been verified against their respective specifications both pre-launch and during the satellite in-orbit verification phase.

  4. Overview of intercalibration of satellite instruments

    Science.gov (United States)

    Chander, G.; Hewison, T.J.; Fox, N.; Wu, X.; Xiong, X.; Blackwell, W.J.

    2013-01-01

    Inter-calibration of satellite instruments is critical for detection and quantification of changes in the Earth’s environment, weather forecasting, understanding climate processes, and monitoring climate and land cover change. These applications use data from many satellites; for the data to be inter-operable, the instruments must be cross-calibrated. To meet the stringent needs of such applications requires that instruments provide reliable, accurate, and consistent measurements over time. Robust techniques are required to ensure that observations from different instruments can be normalized to a common scale that the community agrees on. The long-term reliability of this process needs to be sustained in accordance with established reference standards and best practices. Furthermore, establishing physical meaning to the information through robust Système International d'unités (SI) traceable Calibration and Validation (Cal/Val) is essential to fully understand the parameters under observation. The processes of calibration, correction, stability monitoring, and quality assurance need to be underpinned and evidenced by comparison with “peer instruments” and, ideally, highly calibrated in-orbit reference instruments. Inter-calibration between instruments is a central pillar of the Cal/Val strategies of many national and international satellite remote sensing organizations. Inter-calibration techniques as outlined in this paper not only provide a practical means of identifying and correcting relative biases in radiometric calibration between instruments but also enable potential data gaps between measurement records in a critical time series to be bridged. Use of a robust set of internationally agreed upon and coordinated inter-calibration techniques will lead to significant improvement in the consistency between satellite instruments and facilitate accurate monitoring of the Earth’s climate at uncertainty levels needed to detect and attribute the mechanisms

  5. CEOS Visualization Environment (COVE) Tool for Intercalibration of Satellite Instruments

    Science.gov (United States)

    Kessler, Paul D.; Killough, Brian D.; Gowda, Sanjay; Williams, Brian R.; Chander, Gyanesh; Qu, Min

    2013-01-01

    Increasingly, data from multiple instruments are used to gain a more complete understanding of land surface processes at a variety of scales. Intercalibration, comparison, and coordination of satellite instrument coverage areas is a critical effort of space agencies and of international and domestic organizations. The Committee on Earth Observation Satellites Visualization Environment (COVE) is a suite of browser-based applications that leverage Google Earth to display past, present, and future satellite instrument coverage areas and coincident calibration opportunities. This forecasting and ground coverage analysis and visualization capability greatly benefits the remote sensing calibration community in preparation for multisatellite ground calibration campaigns or individual satellite calibration studies. COVE has been developed for use by a broad international community to improve the efficiency and efficacy of such calibration efforts. This paper provides a brief overview of the COVE tool, its validation, accuracies and limitations with emphasis on the applicability of this visualization tool for supporting ground field campaigns and intercalibration of satellite instruments.

  6. Calibration/Validation Error Budgets, Uncertainties, Traceability and Their Importance to Imaging Spectrometry

    Science.gov (United States)

    Thome, K.

    2016-01-01

    Knowledge of uncertainties and errors are essential for comparisons of remote sensing data across time, space, and spectral domains. Vicarious radiometric calibration is used to demonstrate the need for uncertainty knowledge and to provide an example error budget. The sample error budget serves as an example of the questions and issues that need to be addressed by the calibrationvalidation community as accuracy requirements for imaging spectroscopy data will continue to become more stringent in the future. Error budgets will also be critical to ensure consistency between the range of imaging spectrometers expected to be launched in the next five years.

  7. Calibration of the fluxgate CSC vector magnetometers

    DEFF Research Database (Denmark)

    Merayo, José M.G.; Risbo, Torben; Primdahl, Fritz

    1995-01-01

    This report shows the results of the calibration of the flight and flight spare CSC magnetometers for the Ørsted satellite. The instrument shows an outstanding behavior as regards of both constant temperature and temperature dependance. Neither transverse effects nor non-linear terms have been fo...

  8. Traceable Pyrgeometer Calibrations

    Energy Technology Data Exchange (ETDEWEB)

    Dooraghi, Mike; Kutchenreiter, Mark; Reda, Ibrahim; Habte, Aron; Sengupta, Manajit; Andreas, Afshin; Newman, Martina

    2016-05-02

    This poster presents the development, implementation, and operation of the Broadband Outdoor Radiometer Calibrations (BORCAL) Longwave (LW) system at the Southern Great Plains Radiometric Calibration Facility for the calibration of pyrgeometers that provide traceability to the World Infrared Standard Group.

  9. Traceable Pyrgeometer Calibrations

    Energy Technology Data Exchange (ETDEWEB)

    Dooraghi, Mike; Kutchenreiter, Mark; Reda, Ibrahim; Habte, Aron; Sengupta, Manajit; Andreas, Afshin; Newman, Martina

    2016-05-02

    This poster presents the development, implementation, and operation of the Broadband Outdoor Radiometer Calibrations (BORCAL) Longwave (LW) system at the Southern Great Plains Radiometric Calibration Facility for the calibration of pyrgeometers that provide traceability to the World Infrared Standard Group.

  10. Calibration of sound calibrators: an overview

    Science.gov (United States)

    Milhomem, T. A. B.; Soares, Z. M. D.

    2016-07-01

    This paper presents an overview of calibration of sound calibrators. Initially, traditional calibration methods are presented. Following, the international standard IEC 60942 is discussed emphasizing parameters, target measurement uncertainty and criteria for conformance to the requirements of the standard. Last, Regional Metrology Organizations comparisons are summarized.

  11. From fan to fat? Vicarious losing increases unhealthy eating, but self-affirmation is an effective remedy.

    Science.gov (United States)

    Cornil, Yann; Chandon, Pierre

    2013-10-01

    Using archival and experimental data, we showed that vicarious defeats experienced by fans when their favorite football team loses lead them to consume less healthy food. On the Mondays following a Sunday National Football League (NFL) game, saturated-fat and food-calorie intake increase significantly in cities with losing teams, decrease in cities with winning teams, and remain at their usual levels in comparable cities without an NFL team or with an NFL team that did not play. These effects are greater in cities with the most committed fans, when the opponents are more evenly matched, and when the defeats are narrow. We found similar results when measuring the actual or intended food consumption of French soccer fans who had previously been asked to write about or watch highlights from victories or defeats of soccer teams. However, these unhealthy consequences of vicarious defeats disappear when supporters spontaneously self-affirm or are given the opportunity to do so.

  12. Efficacy of written modeling and vicarious reinforcement in increasing use of problem-solving methods by distressed individuals.

    Science.gov (United States)

    Coates, Celia; Malouff, John M; Rooke, Sally E

    2008-07-01

    The authors evaluated an application of social cognitive theory principles intended to increase adherence to a problem-solving intervention. The study included 132 adult volunteers who wanted to reduce their distress levels. All participants received group training in problem-solving methods. Before attempting to solve at least 1 distressing problem in their lives over the next 3 weeks, participants were randomly assigned to either (a) a modeling with vicarious reinforcement condition in which they received 3 personal anecdotes written by individuals who had successfully applied problem-solving methods to a real problem or (b) a control condition in which they received a fact sheet about problem solving. Word counts of problem-solving writing, self-reports of adherence, and observer ratings of adherence showed that participants in the vicarious reinforcement condition demonstrated significantly higher adherence than did those in the control condition. These results provide support for the effectiveness of symbolic modeling and vicarious reinforcement in increasing adherence to problem-solving methods by individuals who want to decrease their distress.

  13. Overview on calibration and validation activities and first results for ESA's Soil Moisture and Ocean Salinity Mission

    Science.gov (United States)

    Mecklenburg, Susanne; Bouzinac, Catherine; Delwart, Steven; Lopez-Baeza, Ernesto

    The Soil Moisture and Ocean Salinity (SMOS) mission, launched on 2 November 2009, is the European Space Agency's (ESA) second Earth Explorer Opportunity mission. The scientific objectives of the SMOS mission directly respond to the current lack of global observations of soil moisture and ocean salinity, two key variables used in predictive hydrological, oceanographic and atmospheric models. SMOS observations will also provide information on the characteri-sation of ice and snow covered surfaces and the sea ice effect on ocean-atmosphere heat fluxes and dynamics, which affects large-scale processes of the Earth's climate system. A major undertaking in any environmental science related satellite mission are the calibration and validation activities. Calibration is an important prerequisite to the performance verifica-tion, which demonstrates that the instrument meets its requirements. It is also important for the validation of geophysical parameters, such as soil moisture and sea surface salinity. The validation of the data will be handled through a combination of ESA led activities and national efforts. The SMOS Validation and Retrieval Team (SVRT) comprises the scientific contributions that will be made by the projects selected in response to the SMOS calibration and validation Announcement of Opportunity in 2005 as well as the two level 2 Expert Support Laboratories being involved in the development of the soil moisture and sea surface salinity data products. For the validation of the soil moisture data products ESA's activities will focus on two main sites, the Valencia Anchor Station, located in the East of Spain, and the Upper Danube Catchment, located in the South of Germany. In preparation to the SMOS commissioning phase, airborne rehearsal campaigns were conducted in spring 2008 over both aforementioned key sites and will be repeated, in collaboration with the French Space Agency CNES, in spring 2010. These will be coupled with a SMOS matchup generation

  14. Satellite RNAs and Satellite Viruses.

    Science.gov (United States)

    Palukaitis, Peter

    2016-03-01

    Satellite RNAs and satellite viruses are extraviral components that can affect either the pathogenicity, the accumulation, or both of their associated viruses while themselves being dependent on the associated viruses as helper viruses for their infection. Most of these satellite RNAs are noncoding RNAs, and in many cases, have been shown to alter the interaction of their helper viruses with their hosts. In only a few cases have the functions of these satellite RNAs in such interactions been studied in detail. In particular, work on the satellite RNAs of Cucumber mosaic virus and Turnip crinkle virus have provided novel insights into RNAs functioning as noncoding RNAs. These effects are described and potential roles for satellite RNAs in the processes involved in symptom intensification or attenuation are discussed. In most cases, models describing these roles involve some aspect of RNA silencing or its suppression, either directly or indirectly involving the particular satellite RNA.

  15. Seismic Analysis of Historic Masonry Buildings: The Vicarious Palace in Pescia (Italy

    Directory of Open Access Journals (Sweden)

    Luciano Galano

    2012-04-01

    Full Text Available Recent Italian earthquakes have underlined the need for wide monitoring and safety assessment of architectonical heritage. This has emerged also from requirements of the new Italian Technical Recommendations for buildings. Within this subject the paper investigates the seismic vulnerability of a specific monumental masonry building: the Vicarious Palace (Palazzo del Vicario in Pescia, a small town near Florence. The structural behavior of the Palace was investigated using a finite element model in which the non-linearities of the masonry were considered by proper constitutive assumptions. The seismic behavior was evaluated by the pushover method, according to the Italian Technical Recommendations. The results were compared with the ones obtained by a simplified approach based on the kinematic theorem of limit analysis. Comparisons of the expected seismic demand vs the seismic capacity of the Palace confirm the weakness of this type of building to suffer extensive damage under earthquakes, as frequently observed in similar construction typologies. Additionally, the comprehension of the structural behavior under seismic loading allows the identification of a proper retrofitting strategy.

  16. Spontaneous eye movements and trait empathy predict vicarious learning of fear.

    Science.gov (United States)

    Kleberg, Johan L; Selbing, Ida; Lundqvist, Daniel; Hofvander, Björn; Olsson, Andreas

    2015-12-01

    Learning to predict dangerous outcomes is important to survival. In humans, this kind of learning is often transmitted through the observation of others' emotional responses. We analyzed eye movements during an observational/vicarious fear learning procedure, in which healthy participants (N=33) watched another individual ('learning model') receiving aversive treatment (shocks) paired with a predictive conditioned stimulus (CS+), but not a control stimulus (CS-). Participants' gaze pattern towards the model differentiated as a function of whether the CS was predictive or not of a shock to the model. Consistent with our hypothesis that the face of a conspecific in distress can act as an unconditioned stimulus (US), we found that the total fixation time at a learning model's face increased when the CS+ was shown. Furthermore, we found that the total fixation time at the CS+ during learning predicted participants' conditioned responses (CRs) at a later test in the absence of the model. We also demonstrated that trait empathy was associated with stronger CRs, and that autistic traits were positively related to autonomic reactions to watching the model receiving the aversive treatment. Our results have implications for both healthy and dysfunctional socio-emotional learning.

  17. Vicarious learning of children's social-anxiety-related fear beliefs and emotional Stroop bias.

    Science.gov (United States)

    Askew, Chris; Hagel, Anna; Morgan, Julie

    2015-08-01

    Models of social anxiety suggest that negative social experiences contribute to the development of social anxiety, and this is supported by self-report research. However, there is relatively little experimental evidence for the effects of learning experiences on social cognitions. The current study examined the effect of observing a social performance situation with a negative outcome on children's (8 to 11 years old) fear-related beliefs and cognitive processing. Two groups of children were each shown 1 of 2 animated films of a person trying to score in basketball while being observed by others; in 1 film, the outcome was negative, and in the other, it was neutral. Children's fear-related beliefs about performing in front of others were measured before and after the film and children were asked to complete an emotional Stroop task. Results showed that social fear beliefs increased for children who saw the negative social performance film. In addition, these children showed an emotional Stroop bias for social-anxiety-related words compared to children who saw the neutral film. The findings have implications for our understanding of social anxiety disorder and suggest that vicarious learning experiences in childhood may contribute to the development of social anxiety.

  18. Centriolar satellites

    DEFF Research Database (Denmark)

    Tollenaere, Maxim A X; Mailand, Niels; Bekker-Jensen, Simon

    2015-01-01

    Centriolar satellites are small, microscopically visible granules that cluster around centrosomes. These structures, which contain numerous proteins directly involved in centrosome maintenance, ciliogenesis, and neurogenesis, have traditionally been viewed as vehicles for protein trafficking...... highlight newly discovered regulatory mechanisms targeting centriolar satellites and their functional status, and we discuss how defects in centriolar satellite components are intimately linked to a wide spectrum of human diseases....

  19. GAVDOS/west crete cal-val site: Over a decade calibrations for Jason series, SARAL/Altika, cryoSat-2, Sentinel-3 and HY-2 altimeter satellites

    DEFF Research Database (Denmark)

    Mertikas, Stelios; Tziavos, Ilias; Galanakis, Demitris

    for the ascending Pass No.109 and the descending Pass No.18, based on the the GDR-E (Jason-1) and GDR-D (Jason-2) products. Secondly, these values will be cross-examined against the altimeter bias for the SARAL/AltiKa (GDR-T) satellite at Gavdos Cal/Val using its reference ascending orbit No. 571. The Chinese HY-2...

  20. Radiometric calibration status of Landsat-7 and Landsat-5

    Science.gov (United States)

    Barsi, J.A.; Markham, B.L.; Helder, D.L.; Chander, G.

    2007-01-01

    calibration offset error of 0.092 W/m 2 sr ??m (0.68K at 300K) based on vicarious calibration data between 1999 and 2006. The offset error was corrected in the US processing system on April 2007 for all data acquired since April 1999.

  1. Satellite theory

    Science.gov (United States)

    Kozai, Y.

    1981-04-01

    The dynamical characteristics of the natural satellite of Mars, Jupiter, Saturn, Uranus and Neptune are analyzed on the basis of the solar tidal perturbation factor and the oblateness factor of the primary planet for each satellite. For the inner satellites, for which the value of the solar tidal factor is much smaller than the planetary oblateness factor, it is shown that the eccentricity and inclination of satellite orbits are generally very small and almost constant; several pairs of inner satellites are also found to exhibit commensurable mean motions, or secular accelerations in mean longitude. In the case of the outer satellites, for which solar perturbations are dominant, secular perturbations and long-period perturbations may be derived by the solution of equations of motion reduced to one degree of freedom. The existence of a few satellites, termed intermediary satellites, for which the solar tidal perturbation is on the order of the planetary oblateness factor, is also observed, and the pole of the orbital plane of the satellite is noted to execute a complex motion around the pole of the planet or the orbital plane of the planet.

  2. Planck 2013 results. VIII. HFI photometric calibration and mapmaking

    CERN Document Server

    Ade, P A R; Armitage-Caplan, C; Arnaud, M; Ashdown, M; Atrio-Barandela, F; Aumont, J; Baccigalupi, C; Banday, A J; Barreiro, R B; Battaner, E; Benabed, K; Benoît, A; Benoit-Lévy, A; Bernard, J -P; Bersanelli, M; Bertincourt, B; Bielewicz, P; Bobin, J; Bock, J J; Bond, J R; Borrill, J; Bouchet, F R; Boulanger, F; Bridges, M; Bucher, M; Burigana, C; Cardoso, J -F; Catalano, A; Challinor, A; Chamballu, A; Chary, R -R; Chen, X; Chiang, L -Y; Chiang, H C; Christensen, P R; Church, S; Clements, D L; Colombi, S; Colombo, L P L; Combet, C; Couchot, F; Coulais, A; Crill, B P; Curto, A; Cuttaia, F; Danese, L; Davies, R D; de Bernardis, P; de Rosa, A; de Zotti, G; Delabrouille, J; Delouis, J -M; Désert, F -X; Dickinson, C; Diego, J M; Dole, H; Donzelli, S; Doré, O; Douspis, M; Dupac, X; Efstathiou, G; Enßlin, T A; Eriksen, H K; Filliard, C; Finelli, F; Forni, O; Frailis, M; Franceschi, E; Galeotta, S; Ganga, K; Giard, M; Giardino, G; Giraud-Héraud, Y; González-Nuevo, J; Górski, K M; Gratton, S; Gregorio, A; Gruppuso, A; Hansen, F K; Hanson, D; Harrison, D; Helou, G; Henrot-Versillé, S; Hernández-Monteagudo, C; Herranz, D; Hildebrandt, S R; Hivon, E; Hobson, M; Holmes, W A; Hornstrup, A; Hovest, W; Huffenberger, K M; Jaffe, T R; Jaffe, A H; Jones, W C; Juvela, M; Keihänen, E; Keskitalo, R; Kisner, T S; Kneissl, R; Knoche, J; Knox, L; Kunz, M; Kurki-Suonio, H; Lagache, G; Lamarre, J -M; Lasenby, A; Laureijs, R J; Lawrence, C R; Jeune, M Le; Lellouch, E; Leonardi, R; Leroy, C; Lesgourgues, J; Liguori, M; Lilje, P B; Linden-Vørnle, M; López-Caniego, M; Lubin, P M; Macías-Pérez, J F; Maffei, B; Mandolesi, N; Maris, M; Marshall, D J; Martin, P G; Martínez-González, E; Masi, S; Matarrese, S; Matthai, F; Maurin, L; Mazzotta, P; McGehee, P; Meinhold, P R; Melchiorri, A; Mendes, L; Mennella, A; Migliaccio, M; Mitra, S; Miville-Deschênes, M -A; Moneti, A; Montier, L; Moreno, R; Morgante, G; Mortlock, D; Munshi, D; Murphy, J A; Naselsky, P; Nati, F; Natoli, P; Netterfield, C B; Nørgaard-Nielsen, H U; Noviello, F; Novikov, D; Novikov, I; Osborne, S; Oxborrow, C A; Paci, F; Pagano, L; Pajot, F; Paladini, R; Paoletti, D; Partridge, B; Pasian, F; Patanchon, G; Perdereau, O; Perotto, L; Perrotta, F; Piacentini, F; Piat, M; Pierpaoli, E; Pietrobon, D; Plaszczynski, S; Pointecouteau, E; Polenta, G; Ponthieu, N; Popa, L; Poutanen, T; Pratt, G W; Prézeau, G; Prunet, S; Puget, J -L; Rachen, J P; Reinecke, M; Remazeilles, M; Renault, C; Ricciardi, S; Riller, T; Ristorcelli, I; Rocha, G; Rosset, C; Roudier, G; Rusholme, B; Santos, D; Savini, G; Shellard, E P S; Spencer, L D; Starck, J -L; Stolyarov, V; Stompor, R; Sudiwala, R; Sunyaev, R; Sureau, F; Sutton, D; Suur-Uski, A -S; Sygnet, J -F; Tauber, J A; Tavagnacco, D; Techene, S; Terenzi, L; Tomasi, M; Tristram, M; Tucci, M; Umana, G; Valenziano, L; Valiviita, J; Van Tent, B; Vielva, P; Villa, F; Vittorio, N; Wade, L A; Wandelt, B D; Yvon, D; Zacchei, A; Zonca, A

    2014-01-01

    This paper describes the processing applied to the HFI cleaned time-ordered data to produce photometrically calibrated maps. HFI observes the sky over a broad range of frequencies, from 100 to 857 GHz. To get the best accuracy on the calibration on such a large range, two different photometric calibration schemes have to be used. The 545 and 857 \\GHz\\ data are calibrated using Uranus and Neptune flux density measurements, compared with models of their atmospheric emissions to calibrate the data. The lower frequencies (below 353 GHz) are calibrated using the cosmological microwave background dipole.One of the components of this anisotropy results from the orbital motion of the satellite in the Solar System, and is therefore time-variable. Photometric calibration is thus tightly linked to mapmaking, which also addresses low frequency noise removal. The 2013 released HFI data show some evidence for apparent gain variations of the HFI bolometers' detection chain. These variations were identified by comparing obse...

  3. Landsat-7 ETM+ radiometric calibration status

    Science.gov (United States)

    Barsi, Julia A.; Markham, Brian L.; Czapla-Myers, Jeffrey S.; Helder, Dennis L.; Hook, Simon J.; Schott, John R.; Haque, Md. Obaidul

    2016-09-01

    Now in its 17th year of operation, the Enhanced Thematic Mapper + (ETM+), on board the Landsat-7 satellite, continues to systematically acquire imagery of the Earth to add to the 40+ year archive of Landsat data. Characterization of the ETM+ on-orbit radiometric performance has been on-going since its launch in 1999. The radiometric calibration of the reflective bands is still monitored using on-board calibration devices, though the Pseudo-Invariant Calibration Sites (PICS) method has proven to be an effective tool as well. The calibration gains were updated in April 2013 based primarily on PICS results, which corrected for a change of as much as -0.2%/year degradation in the worst case bands. A new comparison with the SADE database of PICS results indicates no additional degradation in the updated calibration. PICS data are still being tracked though the recent trends are not well understood. The thermal band calibration was updated last in October 2013 based on a continued calibration effort by NASA/Jet Propulsion Lab and Rochester Institute of Technology. The update accounted for a 0.036 W/m2 sr μm or 0.26K at 300K bias error. The updated lifetime trend is now stable to within +/- 0.4K.

  4. Calibration of the COBE FIRAS instrument

    Science.gov (United States)

    Fixsen, D. J.; Cheng, E. S.; Cottingham, D. A.; Eplee, R. E., Jr.; Hewagama, T.; Isaacman, R. B.; Jensen, K. A.; Mather, J. C.; Massa, D. L.; Meyer, S. S.

    1994-01-01

    The Far-Infrared Absolute Spectrophotometer (FIRAS) instrument on the Cosmic Background Explorer (COBE) satellite was designed to accurately measure the spectrum of the cosmic microwave background radiation (CMBR) in the frequency range 1-95/cm with an angular resolution of 7 deg. We describe the calibration of this instrument, including the method of obtaining calibration data, reduction of data, the instrument model, fitting the model to the calibration data, and application of the resulting model solution to sky observations. The instrument model fits well for calibration data that resemble sky condition. The method of propagating detector noise through the calibration process to yield a covariance matrix of the calibrated sky data is described. The final uncertainties are variable both in frequency and position, but for a typical calibrated sky 2.6 deg square pixel and 0.7/cm spectral element the random detector noise limit is of order of a few times 10(exp -7) ergs/sq cm/s/sr cm for 2-20/cm, and the difference between the sky and the best-fit cosmic blackbody can be measured with a gain uncertainty of less than 3%.

  5. Parallel evolution and vicariance in the guppy (Poecilia reticulata) over multiple spatial and temporal scales.

    Science.gov (United States)

    Alexander, Heather J; Taylor, John S; Wu, Sampson Sze-Tsun; Breden, Felix

    2006-11-01

    Well-studied model systems present ideal opportunities to understand the relative roles of contemporary selection versus historical processes in determining population differentiation and speciation. Although guppy populations in Trinidad have been a model for studies of evolutionary ecology and sexual selection for more than 50 years, this work has been conducted with little understanding of the phylogenetic history of this species. We used variation in nuclear (X-src) and mitochondrial DNA (mtDNA) sequences to examine the phylogeographic history of Poecilia reticulata Peters (the guppy) across its entire natural range, and to test whether patterns of morphological divergence are a consequence of parallel evolution. Phylogenetic, nested clade, population genetic, and demographic analyses were conducted to investigate patterns of genetic structure at several temporal scales and are discussed in relation to vicariant events, such as tectonic activity and glacial cycles, shaping northeast South American river drainages. The mtDNA phylogeny defined five major lineages, each associated with one or more river drainages, and analysis of molecular variance also detected geographic structuring among these river drainages in an evolutionarily conserved nuclear (X-src) locus. Nested clade and other demographic analyses suggest that the eastern Venezuela/ western Trinidad region is likely the center of origin of P. reticulata. Mantel tests show that the divergence of morphological characters, known to differentiate on a local scale in response to natural and sexual selection pressures, is not associated with mtDNA genetic distance; however, TreeScan analysis identified several significant associations of these characters with the haplotype tree. Parallel upstream/downstream patterns of morphological adaptation in response to selection pressures reported in P. reticulata within Trinidad rivers appears to persist across the natural range. Our results together with previous

  6. Trinocular Calibration Method Based on Binocular Calibration

    Directory of Open Access Journals (Sweden)

    CAO Dan-Dan

    2012-10-01

    Full Text Available In order to solve the self-occlusion problem in plane-based multi-camera calibration system and expand the measurement range, a tri-camera vision system based on binocular calibration is proposed. The three cameras are grouped into two pairs, while the public camera is taken as the reference to build the global coordinate. By calibration of the measured absolute distance and the true absolute distance, global calibration is realized. The MRE (mean relative error of the global calibration of the two camera pairs in the experiments can be as low as 0.277% and 0.328% respectively. Experiment results show that this method is feasible, simple and effective, and has high precision.

  7. Aquarius L-Band Radiometers Calibration Using Cold Sky Observations

    Science.gov (United States)

    Dinnat, Emmanuel P.; Le Vine, David M.; Piepmeier, Jeffrey R.; Brown, Shannon T.; Hong, Liang

    2015-01-01

    An important element in the calibration plan for the Aquarius radiometers is to look at the cold sky. This involves rotating the satellite 180 degrees from its nominal Earth viewing configuration to point the main beams at the celestial sky. At L-band, the cold sky provides a stable, well-characterized scene to be used as a calibration reference. This paper describes the cold sky calibration for Aquarius and how it is used as part of the absolute calibration. Cold sky observations helped establish the radiometer bias, by correcting for an error in the spillover lobe of the antenna pattern, and monitor the long-term radiometer drift.

  8. Combined mitochondrial and nuclear markers revealed a deep vicariant history for Leopoldamys neilli, a cave-dwelling rodent of Thailand.

    Directory of Open Access Journals (Sweden)

    Alice Latinne

    Full Text Available BACKGROUND: Historical biogeography and evolutionary processes of cave taxa have been widely studied in temperate regions. However, Southeast Asian cave ecosystems remain largely unexplored despite their high scientific interest. Here we studied the phylogeography of Leopoldamys neilli, a cave-dwelling murine rodent living in limestone karsts of Thailand, and compared the molecular signature of mitochondrial and nuclear markers. METHODOLOGY/PRINCIPAL FINDINGS: We used a large sampling (n = 225 from 28 localities in Thailand and a combination of mitochondrial and nuclear markers with various evolutionary rates (two intronic regions and 12 microsatellites. The evolutionary history of L. neilli and the relative role of vicariance and dispersal were investigated using ancestral range reconstruction analysis and Approximate Bayesian computation (ABC. Both mitochondrial and nuclear markers support a large-scale population structure of four main groups (west, centre, north and northeast and a strong finer structure within each of these groups. A deep genealogical divergence among geographically close lineages is observed and denotes a high population fragmentation. Our findings suggest that the current phylogeographic pattern of this species results from the fragmentation of a widespread ancestral population and that vicariance has played a significant role in the evolutionary history of L. neilli. These deep vicariant events that occurred during Plio-Pleistocene are related to the formation of the Central Plain of Thailand. Consequently, the western, central, northern and northeastern groups of populations were historically isolated and should be considered as four distinct Evolutionarily Significant Units (ESUs. CONCLUSIONS/SIGNIFICANCE: Our study confirms the benefit of using several independent genetic markers to obtain a comprehensive and reliable picture of L. neilli evolutionary history at different levels of resolution. The complex genetic

  9. Satellite Communications

    CERN Document Server

    Pelton, Joseph N

    2012-01-01

    The field of satellite communications represents the world's largest space industry. Those who are interested in space need to understand the fundamentals of satellite communications, its technology, operation, business, economic, and regulatory aspects. This book explains all this along with key insights into the field's future growth trends and current strategic challenges. Fundamentals of Satellite Communications is a concise book that gives all of the key facts and figures as well as a strategic view of where this dynamic industry is going. Author Joseph N. Pelton, PhD, former Dean of the International Space University and former Director of Strategic Policy at Intelstat, presents a r

  10. The role of vicariance vs. dispersal in shaping genetic patterns in ocellated lizard species in the western Mediterranean

    DEFF Research Database (Denmark)

    Paulo, O. S.; Pinheiro, J.; Miraldo, A.;

    2008-01-01

    in the western Mediterranean as exemplified by the distribution of species and subspecies and genetic variation within the ocellated lizard group. To reassess the role of the MSC, partial sequences of three mitochondrial DNA genes (cytochrome b, 12S and 16S ribosomal RNA) and two nuclear genes (beta......-fibrinogen and C-mos) from species of the ocellated lizard group were analysed. Three alternative hypotheses were tested: that divergence was initiated (i) by post-MSC vicariance as the basin filled, (ii) when separate populations established either side of the strait by pre-MSC overseas dispersal, and (iii...

  11. Error Analysis and On-Board Calibration of Magnetometer in Space Environment Exploration Satellite%空间环境探测卫星用磁强计误差分析及在线标定

    Institute of Scientific and Technical Information of China (English)

    杨照华; 余远金; 祁振强

    2012-01-01

    A magnetometer used in the sun-earth space exploration satellite is usually assembled at the tip of the boom by the action of space disturbance torque and maneuver, the installation matrix magnetometer of varies dramatically, which may lead to the low attitude determination accuracy. Based on the analysis of the magnetometer attitude determination errors, a 19 state high-fidelity measurement model of magnetometer is proposed. Combined with satellite attitude dynamics and kinematics, a 19 state Extended Kalman Filter is adopted to estimate installation matrix on-board and compensate magnetometer measurement. Then the innovative magnetometer measurement model is used to estimate satellite attitude. Finally the algorithm is validated by using the turntable experiment. Results of turntable experiment show that this method can estimate installation matrix errors under the computational requirement of On-board Computer and dramatically improve the accuracy of attitude determination and magnetometer error estimation.%用于探测日地空间磁环境的磁强计多数安装在伸杆的末端,长期受太阳辐射等空间环境干扰力矩以及机动等影响,磁强计安装矩阵随时间发生较大的变化,从而导致卫星定姿精度下降.为此,在分析空间环境干扰力矩和磁强计定姿误差特性的基础上,建立了19维高精度的磁强计误差模型,结合卫星的运动学和姿态动力学特性,采用EKF滤波方法对安装矩阵进行实时估计与修正补偿,并利用该磁强计模型实现卫星的姿态确定,最后利用实验进行验证.实验结果表明,该方法能够在满足星载计算机的计算量要求的同时,在线估计安装矩阵误差,显著提高了磁强计的误差估计精度与定姿精度.

  12. Satellite Geomagnetism

    DEFF Research Database (Denmark)

    Olsen, Nils; Stolle, Claudia

    2012-01-01

    Observations of Earth’s magnetic field from space began more than 50 years ago. A continuous monitoring of the field using low Earth orbit (LEO) satellites, however, started only in 1999, and three satellites have taken highprecision measurements of the geomagnetic field during the past decade...... ability to characterize and understand the many sources that contribute to Earth’s magnetic field. In this review, we summarize investigations of Earth’s interior and environment that have been possible through the analysis of high-precision magnetic field observations taken by LEO satellites........ The unprecedented time-space coverage of their data opened revolutionary new possibilities for monitoring, understanding, and exploring Earth’s magnetic field. In the near future, the three-satellite constellation Swarm will ensure continuity of such measurement and provide enhanced possibilities to improve our...

  13. Satellite (Natural)

    Science.gov (United States)

    Murdin, P.

    2000-11-01

    In its most general sense, any celestial object in orbit around a similar larger object. Thus, for example, the Magellanic Clouds are satellite galaxies of our own Milky Way galaxy. Without qualification, the term is used to mean a body in orbit around a planet; an alternative term is moon. The term natural satellite distinguishes these bodies from artificial satellites—spacecraft placed in orbi...

  14. The calibration of PIXIE

    Science.gov (United States)

    Fixsen, D. J.; Chuss, D. T.; Kogut, Alan; Mirel, Paul; Wollack, E. J.

    2016-07-01

    The FIRAS instrument demonstrated the use of an external calibrator to compare the sky to an instrumented blackbody. The PIXIE calibrator is improved from -35 dB to -65 dB. Another significant improvement is the ability to insert the calibrator into either input of the FTS. This allows detection and correction of additional errors, reduces the effective calibration noise by a factor of 2, eliminates an entire class of systematics and allows continuous observations. This paper presents the design and use of the PIXIE calibrator.

  15. Summary of KOMPSAT-5 Calibration and Validation

    Science.gov (United States)

    Yang, D.; Jeong, H.; Lee, S.; Kim, B.

    2013-12-01

    Korean Multi-Purpose Satellite 5 (KOMPSAT-5), equipped with high resolution X-band (9.66 GHz) Synthetic Aperture Radar (SAR), is planning to be launched on August 22, 2013. With the satellite's primary mission objective being providing Geographical Information System (GIS), Ocean monitoring and Land management, and Disaster and ENvironment monitoring (GOLDEN), it is expected that its applications for scientific research on geographical processes will be extensive. In order to meet its mission objective, the KOMPSAT-5 will provide three different kinds of SAR imaging modes; High Resolution Mode (1 m resolution, 5 km swath), Standard Mode (3 m resolution, 30 km swath), and Wide Swath Mode (20 m resolution, 100 km swath). The KOMPSAT-5 will be operated in a 550 km sun-synchronous, dawn- dusk orbit with a 28-day ground repeat cycle providing valuable image information on Earth surface day-or-night and even in bad weather condition. After successful launch of the satellite, it will go through Launch and Early Operation (LEOP) and In-Orbit Testing (IOT) period about for 6 months to carry out various tests on satellite bus and payload systems. The satellite bus system will be tested during the first 3 weeks after the launch focusing on the Attitude and Orbit Control Subsystem (AOCS) and Integrated GPS Occultation Receiver (IGOR) calibration. With the completion of bus system test, the SAR payload system will be calibrated during initial In-Flight check period (11 weeks) by the joint effort of Thales Alenia Space Italy (TAS-I) and Korea Aerospace Research Institute (KARI). The pointing and relative calibration will be carried out during this period by analyzing the doppler frequency and antenna beam pattern of reflected microwave signal from selected regions with uniform backscattering coefficients (e.g. Amazon rainforest). A dedicated SAR calibration, called primary calibration, will be allocated at the end of LEOP for 12 weeks to perform thorough calibration activities

  16. Calibration of Geodetic Instruments

    Directory of Open Access Journals (Sweden)

    Marek Bajtala

    2005-06-01

    Full Text Available The problem of metrology and security systems of unification, correctness and standard reproducibilities belong to the preferred requirements of theory and technical practice in geodesy. Requirements on the control and verification of measured instruments and equipments increase and the importance and up-to-date of calibration get into the foreground. Calibration possibilities of length-scales (of electronic rangefinders and angle-scales (of horizontal circles of geodetic instruments. Calibration of electronic rangefinders on the linear comparative baseline in terrain. Primary standard of planar angle – optical traverse and its exploitation for calibration of the horizontal circles of theodolites. The calibration equipment of the Institute of Slovak Metrology in Bratislava. The Calibration process and results from the calibration of horizontal circles of selected geodetic instruments.

  17. Mid-Tertiary dispersal, not Gondwanan vicariance explains distribution patterns in the wax palm subfamily (Ceroxyloideae: Arecaceae).

    Science.gov (United States)

    Trénel, Philipp; Gustafsson, Mats H G; Baker, William J; Asmussen-Lange, Conny B; Dransfield, John; Borchsenius, Finn

    2007-10-01

    The Ceroxyloideae is a small but heterogeneous subfamily of palms (Arecaceae, Palmae). It includes a Caribbean lineage (tribe Cyclospathae), a southern hemisphere disjunction (tribe Ceroxyleae), and an amphi-Andean element (tribe Phytelepheae), until recently considered a distinct subfamily (Phytelephantoideae) due to its highly derived morphology. A variety of hypotheses have been proposed to account for the biogeography of the subfamily, involving Gondwanan vicariance, austral interplate dispersal from South America to Australia via Antarctica, Andean orogeny, and Pleistocene refuges. We assessed the systematic classification and biogeography of the group based on a densely sampled phylogeny using >5.5kb of DNA sequences from three plastid and two nuclear genomic regions. The subfamily and each of its three tribes were resolved as monophyletic with high support. Divergence time estimates based on penalized likelihood and Bayesian dating methods indicate that Gondwanan vicariance is highly unlikely as an explanation for basic disjunctions in tribe Ceroxyleae. Alternative explanations include a mid-Tertiary trans-Atlantic/trans-African dispersal track and the "lemurian stepping stones" hypothesis. Austral interplate dispersal of Oraniopsis to Australia could have occurred, but apparently only in the mid-Eocene/early Oligocene interval after global cooling had begun. Our data do not support Pleistocene climatic changes as drivers for speciation in the Andean-centered Phytelepheae as previously proposed. Radiation in this tribe coincides largely with the major uplift of the Andes, favoring Andean orogeny over Pleistocene climatic changes as a possible speciation-promoting factor in this tribe.

  18. Validation of GOCE Satellite Gravity Gradient Observations by Orbital Analysis

    Science.gov (United States)

    Visser, P.

    The upcoming European Space Agency ESA Gravity Field and Steady-State Ocean Circular Explorer GOCE mission foreseen to be launched in 2007 will carry a highly sensitive gradiometer consisting of 3 orthogonal pairs of ultra-sensitive accelerometers A challenging calibration procedure has been developed to calibrate the gradiometer not only before launch by a series of on-ground tests but also after launch by making use of on-board cold-gas thrusters to provoke a long series of gradiometer shaking events which will provide observations for its calibration This calibration can be checked by a combined analysis of GPS Satellite-to-Satellite Tracking SST and Satellite Gravity Gradient SGG observations An assessment has been made of how well SGG calibration parameters can be estimated in a combined orbit and gravity field estimation from these observations

  19. MAGNETIC GRADIOMETRY: Instrumentation, Calibration and Applications

    DEFF Research Database (Denmark)

    Merayo, Jose Maria Garcia

    is to be used in the forthcoming satellites CHAMP and SAC-C. Linearity, thermal, radiation, dynamic and calibration tests are carried out to qualify the magnetometer in order to ensure state-of-the-art performance with subnanotesla precision. The overall calibration of the gradiometer yields an omnidirectional...... absolute accuracy of 93pT/m.The scalar calibration of a vector magnetometer is explained thoroughly. The novel method is simple and it represents the most robust and unique way to estimate the characterizing 9 parameters of a vector magnetometer. Its power relies on the linearization of the parametrization...... and offers the possibility of separating the geomagnetic field sources.By using tensor algebra the spherical harmonic expansion of the magnetic field in a curl free region and its associated gradient tensor are derived. This differential tensor quantity is then expressed by spherical coordinates...

  20. Suomi NPP VIIRS Reflective Solar Bands Operational Calibration Reprocessing

    Directory of Open Access Journals (Sweden)

    Slawomir Blonski

    2015-12-01

    Full Text Available Radiometric calibration coefficients for the VIIRS (Visible Infrared Imaging Radiometer Suite reflective solar bands have been reprocessed from the beginning of the Suomi NPP (National Polar-orbiting Partnership mission until present. An automated calibration procedure, implemented in the NOAA (National Oceanic and Atmospheric Administration JPSS (Joint Polar Satellite System operational data production system, was applied to reprocess onboard solar calibration data and solar diffuser degradation measurements. The latest processing parameters from the operational system were used to include corrected solar vectors, optimized directional dependence of attenuation screens transmittance and solar diffuser reflectance, updated prelaunch calibration coefficients without an offset term, and optimized Robust Holt-Winters filter parameters. The parameters were consistently used to generate a complete set of the radiometric calibration coefficients for the entire duration of the Suomi NPP mission. The reprocessing has demonstrated that the automated calibration procedure can be successfully applied to all solar measurements acquired from the beginning of the mission until the full deployment of the automated procedure in the operational processing system. The reprocessed calibration coefficients can be further used to reprocess VIIRS SDR (Sensor Data Record and other data products. The reprocessing has also demonstrated how the automated calibration procedure can be used during activation of the VIIRS instruments on the future JPSS satellites.

  1. Scientific Satellites

    Science.gov (United States)

    1967-01-01

    followed Hale’s into orbit. In 1879, Jules Verne wrote about launching small satellites with a gun possessing a muzzle velocity of 10 000 m/sec (ref. 3...was activated in 1950.11 It was located only a few tens of miles from the spot where Jules Verne had his Baltimore Gun Club fire a manned projectile to...principle, satellites can be launched by a single impulse applied at the Earth’s surface-say, with a large cannon, & la Jules Verne (sec. 8-3). In

  2. Thermal-structure coupled deformation in an optical-mechanical system for radiometric calibration of satellite IR remote sensor%卫星红外遥感器辐射定标光机系统热-结构耦合变形分析

    Institute of Scientific and Technical Information of China (English)

    肖庆生; 杨林华; 赵寿根

    2011-01-01

    The thermal deformation of a radiometric calibration optical-structure system under simulated space environments would cause a great damage to the imaging quality of the system, and reduce the precision of the calibration test eventually.In this paper, a finite element model of such a system is built.Based on the model, with the temperature values at nodes obtained in the radiometric calibration test for the satellite multi-spectral scanner, the distribution of the thermal-structure coupling deformation is calculated and analyzed.The results show that the thermal distortion of the optical bracket would cause rigid displacements of the primary mirror and the primary reflector,making them off the axis or acclivitous and the black body off the focus, and changing the focal distance of the system in a non-uniform steady-state Iow temperature condition.But the root-mean-square (RMS) values of deformation of the anamorphic mirrors are both less than one fortieth of the wave length, within the actual surface shape accuracy requirements of the optical system.%辐射定标光机系统在模拟空间环境下的热变形直接影响定标光学系统成像质量,并决定星载遥感器辐射定标试验精度.文章建立的辐射定标光机系统有限元模型,以某卫星多光谱扫描仪辐射定标试验中的实测温度变化作为温度载荷,计算和研究了该系统在真空低温环境下的热-结构耦合变形的分布情况和分布规律.结果表明:在非均匀稳态低温环境下,该系统光学支架热变形使主镜及主反射镜发生刚性位移,引起垂轴方向位移、倾斜,黑体的离焦和光学系统焦距变化;反射镜表面畸变RMS值均为1/40波长以下,可以满足实际光学系统的面形准确度要求.

  3. Distributed Radio Interferometric Calibration

    CERN Document Server

    Yatawatta, Sarod

    2015-01-01

    Increasing data volumes delivered by a new generation of radio interferometers require computationally efficient and robust calibration algorithms. In this paper, we propose distributed calibration as a way of improving both computational cost as well as robustness in calibration. We exploit the data parallelism across frequency that is inherent in radio astronomical observations that are recorded as multiple channels at different frequencies. Moreover, we also exploit the smoothness of the variation of calibration parameters across frequency. Data parallelism enables us to distribute the computing load across a network of compute agents. Smoothness in frequency enables us reformulate calibration as a consensus optimization problem. With this formulation, we enable flow of information between compute agents calibrating data at different frequencies, without actually passing the data, and thereby improving robustness. We present simulation results to show the feasibility as well as the advantages of distribute...

  4. Inter-calibration of polar imager solar channels using SEVIRI

    Directory of Open Access Journals (Sweden)

    J. F. Meirink

    2013-04-01

    Full Text Available Accurate calibration of satellite imagers is a prerequisite for using their measurements in climate applications. Here we present a method for the inter-calibration of geostationary and polar-orbiting imager solar channels based on regressions of collocated near-nadir radiances. Specific attention is paid to correcting for differences in spectral response between instruments. The method is used to calibrate the solar channels of the Spinning Enhanced Visible and Infrared Imager (SEVIRI on the geostationary Meteosat satellite with corresponding channels of the Moderate Resolution Imaging Spectroradiometer (MODIS on the polar-orbiting Aqua satellite. The SEVIRI operational calibration is found to be stable during the years 2004 to 2009 but off by −8, −6, and +3.5% for channels 1 (0.6 μm, 2 (0.8 μm, and 3 (1.6 μm, respectively. These results are robust for a range of choices that can be made regarding data collocation and selection, as long as the viewing and illumination geometries of the two instruments are matched. Uncertainties in the inter-calibration method are estimated to be 1% for channel 1 and 1.5% for channels 2 and 3. A specific application of the method is the inter-calibration of polar imagers using SEVIRI as a transfer instrument. This offers an alternative to direct inter-calibration, which in general has to rely on high-latitude collocations. Using this method we have tied MODIS-Terra and Advanced Very High Resolution Radiometer (AVHRR instruments on National Oceanic and Atmospheric Administration (NOAA satellites 17 and 18 to MODIS-Aqua for the years 2007 to 2009. While reflectances of the two MODIS instruments differ less than 2% for all channels considered, deviations of an existing AVHRR calibration from MODIS-Aqua reach −3.5 and +2.5% for the 0.8 and 1.6 μm channels, respectively.

  5. The Science of Calibration

    Science.gov (United States)

    Kent, S. M.

    2016-05-01

    This paper presents a broad overview of the many issues involved in calibrating astronomical data, covering the full electromagnetic spectrum from radio waves to gamma rays, and considering both ground-based and space-based missions. These issues include the science drivers for absolute and relative calibration, the physics behind calibration and the mechanisms used to transfer it from the laboratory to an astronomical source, the need for networks of calibrated astronomical standards, and some of the challenges faced by large surveys and missions.

  6. Landsat 8 on-orbit characterization and calibration system

    Science.gov (United States)

    Micijevic, Esad; Morfitt, Ron; Choate, Michael J.

    2011-01-01

    The Landsat Data Continuity Mission (LDCM) is planning to launch the Landsat 8 satellite in December 2012, which continues an uninterrupted record of consistently calibrated globally acquired multispectral images of the Earth started in 1972. The satellite will carry two imaging sensors: the Operational Land Imager (OLI) and the Thermal Infrared Sensor (TIRS). The OLI will provide visible, near-infrared and short-wave infrared data in nine spectral bands while the TIRS will acquire thermal infrared data in two bands. Both sensors have a pushbroom design and consequently, each has a large number of detectors to be characterized. Image and calibration data downlinked from the satellite will be processed by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center using the Landsat 8 Image Assessment System (IAS), a component of the Ground System. In addition to extracting statistics from all Earth images acquired, the IAS will process and trend results from analysis of special calibration acquisitions, such as solar diffuser, lunar, shutter, night, lamp and blackbody data, and preselected calibration sites. The trended data will be systematically processed and analyzed, and calibration and characterization parameters will be updated using both automatic and customized manual tools. This paper describes the analysis tools and the system developed to monitor and characterize on-orbit performance and calibrate the Landsat 8 sensors and image data products.

  7. Just watching the game ain’t enough: Striatal fMRI reward responses to successes and failures in a video game during active and vicarious playing

    Directory of Open Access Journals (Sweden)

    Jari eKätsyri

    2013-06-01

    Full Text Available Although the multimodal stimulation provided by modern audiovisual video games is pleasing by itself, the rewarding nature of video game playing depends critically also on the players’ active engagement in the gameplay. The extent to which active engagement influences dopaminergic brain reward circuit responses remains unsettled. Here we show that striatal reward circuit responses elicited by successes (wins and failures (losses in a video game are stronger during active than vicarious gameplay. Eleven healthy males both played a competitive first-person tank shooter game (active playing and watched a pre-recorded gameplay video (vicarious playing while their hemodynamic brain activation was measured with 3-tesla functional magnetic resonance imaging (fMRI. Wins and losses were paired with symmetrical monetary rewards and punishments during active and vicarious playing so that the external reward context remained identical during both conditions. Brain activation was stronger in the orbitomedial prefrontal cortex (omPFC during winning than losing, both during active and vicarious playing conditions. In contrast, both wins and losses suppressed activations in the midbrain and striatum during active playing; however, the striatal suppression, particularly in the anterior putamen, was more pronounced during loss than win events. Sensorimotor confounds related to joystick movements did not account for the results. Self-ratings indicated losing to be more unpleasant during active than vicarious playing. Our findings demonstrate striatum to be selectively sensitive to self-acquired rewards, in contrast to frontal components of the reward circuit that process both self-acquired and passively received rewards. We propose that the striatal responses to repeated acquisition of rewards that are contingent on game related successes contribute to the motivational pull of video-game playing.

  8. Adverse psychosocial consequences: Compassion fatigue, burnout and vicarious traumatization: Are nurses who provide palliative and hematological cancer care vulnerable?

    Directory of Open Access Journals (Sweden)

    Brenda M Sabo

    2008-01-01

    Full Text Available The work environment significantly affects the physical, psychological, emotional and/or spiritual wellbeing of individuals is unquestionable. Adverse effects have been noted among healthcare professionals working with clients experiencing pain and suffering often associated with cancer, palliative or end-of-life care; however, little is known about how or in which manner the nurse-patient-family relationship may affect the psychosocial health and wellbeing of nurses working in these areas. Three concepts have been highlighted as most frequently associated with the adverse consequences of caring work: these are compassion fatigue (secondary traumatic stress, burnout and vicarious traumatization. The following discussion investigates these concepts and their implications on palliative and hematological cancer nursing practice.

  9. Handheld temperature calibrator

    National Research Council Canada - National Science Library

    Martella, Melanie

    2003-01-01

    ... you sign on. What are you waiting for? JOFRA ETC Series dry-block calibrators from AMETEK Test & Calibration Instruments, Largo, FL, are small enough to be handheld and feature easy-to-read displays, multiple bore blocks, programmable test setup, RS-232 communications, and software. Two versions are available: the ETC 125A that ranges from -10[degrees]C to 125[d...

  10. OLI Radiometric Calibration

    Science.gov (United States)

    Markham, Brian; Morfitt, Ron; Kvaran, Geir; Biggar, Stuart; Leisso, Nathan; Czapla-Myers, Jeff

    2011-01-01

    Goals: (1) Present an overview of the pre-launch radiance, reflectance & uniformity calibration of the Operational Land Imager (OLI) (1a) Transfer to orbit/heliostat (1b) Linearity (2) Discuss on-orbit plans for radiance, reflectance and uniformity calibration of the OLI

  11. SCIAMACHY Level 1 data: calibration concept and in-flight calibration

    Directory of Open Access Journals (Sweden)

    G. Lichtenberg

    2006-01-01

    Full Text Available The calibration of SCIAMACHY was thoroughly checked since the instrument was launched on-board ENVISAT in February 2002. While SCIAMACHY's functional performance is excellent since launch, a number of technical difficulties have appeared, that required adjustments to the calibration. The problems can be separated into three types: (1 Those caused by the instrument and/or platform environment. Among these are the high water content in the satellite structure and/or MLI layer. This results in the deposition of ice on the detectors in channels 7 and 8 which seriously affects the retrievals in the IR, mostly because of the continuous change of the slit function caused by scattering of the light through the ice layer. Additionally a light leak in channel 7 severely hampers any retrieval from this channel. (2 Problems due to errors in the on-ground calibration and/or data processing affecting for example the radiometric calibration. A new approach based on a mixture of on-ground and in-flight data is shortly described here. (3 Problems caused by principal limitations of the calibration concept, e.g. the possible appearance of spectral structures after the polarisation correction due to unavoidable errors in the determination of atmospheric polarisation. In this paper we give a complete overview of the calibration and problems that still have to be solved. We will also give an indication of the effect of calibration problems on retrievals where possible. Since the operational processing chain is currently being updated and no newly processed data are available at this point in time, for some calibration issues only a rough estimate of the effect on Level 2 products can be given. However, it is the intention of this paper to serve as a future reference for detailed studies into specific calibration issues.

  12. Development of an Operational Calibration Methodology for the Landsat Thermal Data Archive and Initial Testing of the Atmospheric Compensation Component of a Land Surface Temperature (LST Product from the Archive

    Directory of Open Access Journals (Sweden)

    Monica Cook

    2014-11-01

    Full Text Available The Landsat program has been producing an archive of thermal imagery that spans the globe and covers 30 years of the thermal history of the planet at human scales (60–120 m. Most of that archive’s absolute radiometric calibration has been fixed through vicarious calibration techniques. These calibration ties to trusted values have often taken a year or more to gather sufficient data and, in some cases, it has been over a decade before calibration certainty has been established. With temperature being such a critical factor for all living systems and the ongoing concern over the impacts of climate change, NASA and the United States Geological Survey (USGS are leading efforts to provide timely and accurate temperature data from the Landsat thermal data archive. This paper discusses two closely related advances that are critical steps toward providing timely and reliable temperature image maps from Landsat. The first advance involves the development and testing of an autonomous procedure for gathering and performing initial screening of large amounts of vicarious calibration data. The second advance discussed in this paper is the per-pixel atmospheric compensation of the data to permit calculation of the emitted surface radiance (using ancillary sources of emissivity data and the corresponding land surface temperature (LST.

  13. GPM, AMSR2 GCOMW1 Level 1C Common Calibrated Brightness Temperature VV02A

    Data.gov (United States)

    National Aeronautics and Space Administration — 1CAMSR2 contains common calibrated brightness temperature from the AMSR2 passive microwave instrument flown on the GCOMW1 satellite. This products contains 6 swaths....

  14. GPM, AMSR2 GCOMW1 Level 1C Common Calibrated Brightness Temperature VV03A

    Data.gov (United States)

    National Aeronautics and Space Administration — 1CAMSR2 contains common calibrated brightness temperature from the AMSR2 passive microwave instrument flown on the GCOMW1 satellite. This products contains 6 swaths....

  15. WFPC2 Polarization Calibration

    Science.gov (United States)

    Biretta, J.; McMaster, M.

    1997-12-01

    We derive a detailed calibration for WFPC2 polarization data which is accurate to about 1.5%. We begin by computing polarizer flats, and show how they are applied to data. A physical model for the polarization effects of the WFPC2 optics is then created using Mueller matricies. This model includes corrections for the instrumental polarization (diattenuation and phase retardance) of the pick-off mirror, as well as the high cross-polarization transmission of the polarizer filter. We compare this model against the on-orbit observations of polarization calibrators, and show it predicts relative counts in the different polarizer/aperture settings to 1.5% RMS accuracy. We then show how this model can be used to calibrate GO data, and present two WWW tools which allow observers to easily calibrate their data. Detailed examples are given illustrationg the calibration and display of WFPC2 polarization data. In closing we describe future plans and possible improvements.

  16. Sandia WIPP calibration traceability

    Energy Technology Data Exchange (ETDEWEB)

    Schuhen, M.D. [Sandia National Labs., Albuquerque, NM (United States); Dean, T.A. [RE/SPEC, Inc., Albuquerque, NM (United States)

    1996-05-01

    This report summarizes the work performed to establish calibration traceability for the instrumentation used by Sandia National Laboratories at the Waste Isolation Pilot Plant (WIPP) during testing from 1980-1985. Identifying the calibration traceability is an important part of establishing a pedigree for the data and is part of the qualification of existing data. In general, the requirement states that the calibration of Measuring and Test equipment must have a valid relationship to nationally recognized standards or the basis for the calibration must be documented. Sandia recognized that just establishing calibration traceability would not necessarily mean that all QA requirements were met during the certification of test instrumentation. To address this concern, the assessment was expanded to include various activities.

  17. Calibration of Galileo signals for time metrology.

    Science.gov (United States)

    Defraigne, Pascale; Aerts, Wim; Cerretto, Giancarlo; Cantoni, Elena; Sleewaegen, Jean-Marie

    2014-12-01

    Using global navigation satellite system (GNSS) signals for accurate timing and time transfer requires the knowledge of all electric delays of the signals inside the receiving system. GNSS stations dedicated to timing or time transfer are classically calibrated only for Global Positioning System (GPS) signals. This paper proposes a procedure to determine the hardware delays of a GNSS receiving station for Galileo signals, once the delays of the GPS signals are known. This approach makes use of the broadcast satellite inter-signal biases, and is based on the ionospheric delay measured from dual-frequency combinations of GPS and Galileo signals. The uncertainty on the so-determined hardware delays is estimated to 3.7 ns for each isolated code in the L5 frequency band, and 4.2 ns for the ionosphere-free combination of E1 with a code of the L5 frequency band. For the calibration of a time transfer link between two stations, another approach can be used, based on the difference between the common-view time transfer results obtained with calibrated GPS data and with uncalibrated Galileo data. It is shown that the results obtained with this approach or with the ionospheric method are equivalent.

  18. Space environment's effect on MODIS calibration

    Science.gov (United States)

    Dodd, J. L.; Wenny, B. N.; Chiang, K.; Xiong, X.

    2010-09-01

    The MODerate resolution Imaging Spectroradiometer flies on board the Earth Observing System (EOS) satellites Terra and Aqua in a sun-synchronous orbit that crosses the equator at 10:30 AM and 2:30 PM, respectively, at a low earth orbit (LEO) altitude of 705 km. Terra was launched on December 18,1999 and Aqua was launched on May 4, 2002. As the MODIS instruments on board these satellites continue to operate beyond the design lifetime of six years, the cumulative effect of the space environment on MODIS and its calibration is of increasing importance. There are several aspects of the space environment that impact both the top of atmosphere (TOA) calibration and, therefore, the final science products of MODIS. The south Atlantic anomaly (SAA), spacecraft drag, extreme radiative and thermal environment, and the presence of orbital debris have the potential to significantly impact both MODIS and the spacecraft, either directly or indirectly, possibly resulting in data loss. Efforts from the Terra and Aqua Flight Operations Teams (FOT), the MODIS Instrument Operations Team (IOT), and the MODIS Characterization Support Team (MCST) prevent or minimize external impact on the TOA calibrated data. This paper discusses specific effects of the space environment on MODIS and how they are minimized.

  19. Segment Based Camera Calibration

    Institute of Scientific and Technical Information of China (English)

    马颂德; 魏国庆; 等

    1993-01-01

    The basic idea of calibrating a camera system in previous approaches is to determine camera parmeters by using a set of known 3D points as calibration reference.In this paper,we present a method of camera calibration in whih camera parameters are determined by a set of 3D lines.A set of constraints is derived on camea parameters in terms of perspective line mapping.Form these constraints,the same perspective transformation matrix as that for point mapping can be computed linearly.The minimum number of calibration lines is 6.This result generalizes that of Liu,Huang and Faugeras[12] for camera location determination in which at least 8 line correspondences are required for linear computation of camera location.Since line segments in an image can be located easily and more accurately than points,the use of lines as calibration reference tends to ease the computation in inage preprocessing and to improve calibration accuracy.Experimental results on the calibration along with stereo reconstruction are reported.

  20. Radiometric Cross-calibration of KOMPSAT-3A with Landsat-8

    Science.gov (United States)

    Shin, D. Y.; Ahn, H. Y.; Lee, S. G.; Choi, C. U.; Kim, J. S.

    2016-06-01

    In this study, Cross calibration was conducted at the Libya 4 PICS site on 2015 using Landsat-8 and KOMPSAT-3A. Ideally a cross calibration should be calculated for each individual scene pair because on any given date the TOA spectral profile is influenced by sun and satellite view geometry and the atmospheric conditions. However, using the near-simultaneous images minimizes this effect because the sensors are viewing the same atmosphere. For the cross calibration, the calibration coefficient was calculated by comparing the at sensor spectral radiance for the same location calculated using the Landsat-8 calibration parameters in metadata and the DN of KOMPSAT-3A for the regions of interest (ROI). Cross calibration can be conducted because the satellite sensors used for overpass have a similar bandwidth. However, not all satellites have the same color filter transmittance and sensor reactivity, even though the purpose is to observe the visible bands. Therefore, the differences in the RSR should be corrected. For the cross-calibration, a calibration coefficient was calculated using the TOA radiance and KOMPSAT-3 DN of the Landsat-8 OLI overpassed at the Libya 4 Site, As a result, the accuracy of the calibration coefficient at the site was assumed to be ± 1.0%. In terms of the results, the radiometric calibration coefficients suggested here are thought to be useful for maintaining the optical quality of the KOMPSAT-3A.

  1. Xenopus in Space and Time: Fossils, Node Calibrations, Tip-Dating, and Paleobiogeography.

    Science.gov (United States)

    Cannatella, David

    2015-01-01

    Published data from DNA sequences, morphology of 11 extant and 15 extinct frog taxa, and stratigraphic ranges of fossils were integrated to open a window into the deep-time evolution of Xenopus. The ages and morphological characters of fossils were used as independent datasets to calibrate a chronogram. We found that DNA sequences, either alone or in combination with morphological data and fossils, tended to support a close relationship between Xenopus and Hymenochirus, although in some analyses this topology was not significantly better than the Pipa + Hymenochirus topology. Analyses that excluded DNA data found strong support for the Pipa + Hymenochirus tree. The criterion for selecting the maximum age of the calibration prior influenced the age estimates, and our age estimates of early divergences in the tree of frogs are substantially younger than those of published studies. Node-dating and tip-dating calibrations, either alone or in combination, yielded older dates for nodes than did a root calibration alone. Our estimates of divergence times indicate that overwater dispersal, rather than vicariance due to the splitting of Africa and South America, may explain the presence of Xenopus in Africa and its closest fossil relatives in South America.

  2. Gemini Planet Imager Observational Calibrations VI: Photometric and Spectroscopic Calibration for the Integral Field Spectrograph

    CERN Document Server

    Maire, Jérôme; De Rosa, Robert J; Perrin, Marshall D; Rajan, Abhijith; Savransky, Dmitry; Wang, Jason J; Ruffio, Jean-Baptiste; Wolff, Schuyler G; Chilcote, Jeffrey K; Doyon, René; Graham, James R; Greenbaum, Alexandra Z; Konopacky, Quinn M; Larkin, James E; Macintosh, Bruce A; Marois, Christian; Millar-Blanchaer, Max; Patience, Jennifer; Pueyo, Laurent A; Sivaramakrishnan, Anand; Thomas, Sandrine J; Weiss, Jason L

    2014-01-01

    The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field spectrograph providing low resolution spectroscopy across five bands between 0.95 and 2.5 $\\mu$m. This paper describes the sequence of processing steps required for the spectro-photometric calibration of GPI science data, and the necessary calibration files. Based on calibration observations of the white dwarf HD 8049B we estimate that the systematic error in spectra extracted from GPI observations is less than 5%. The flux ratio of the occulted star and fiducial satellite spots within coronagraphic GPI observations, required to estimate the magnitude difference between a target and any resolved companions, was measur...

  3. Site Calibration report

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    This report describes the site calibration carried out at Østerild, during a given period. The site calibration was performed with two Windcube WLS7 (v1) lidars at ten measurements heights. The lidar is not a sensor approved by the current version of the IEC 61400-12-1 [1] and therefore the site...... calibration with lidars does not comply with the standard. However, the measurements are carried out following the guidelines of IEC 61400-12-1 where possible, but with some deviations presented in the following chapters....

  4. Lidar to lidar calibration

    DEFF Research Database (Denmark)

    Fernandez Garcia, Sergio; Villanueva, Héctor

    This report presents the result of the lidar to lidar calibration performed for ground-based lidar. Calibration is here understood as the establishment of a relation between the reference lidar wind speed measurements with measurement uncertainties provided by measurement standard and corresponding...... lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from the reference lidar measurements are given for information only....

  5. Lidar to lidar calibration

    DEFF Research Database (Denmark)

    Georgieva Yankova, Ginka; Courtney, Michael

    This report presents the result of the lidar to lidar calibration performed for ground-based lidar. Calibration is here understood as the establishment of a relation between the reference lidar wind speed measurements with measurement uncertainties provided by measurement standard and corresponding...... lidar wind speed indications with associated measurement uncertainties. The lidar calibration concerns the 10 minute mean wind speed measurements. The comparison of the lidar measurements of the wind direction with that from the reference lidar measurements are given for information only....

  6. Calibration Fixture For Anemometer Probes

    Science.gov (United States)

    Lewis, Charles R.; Nagel, Robert T.

    1993-01-01

    Fixture facilitates calibration of three-dimensional sideflow thermal anemometer probes. With fixture, probe oriented at number of angles throughout its design range. Readings calibrated as function of orientation in airflow. Calibration repeatable and verifiable.

  7. Corrections to the MODIS Aqua Calibration Derived From MODIS Aqua Ocean Color Products

    Science.gov (United States)

    Meister, Gerhard; Franz, Bryan Alden

    2013-01-01

    Ocean color products such as, e.g., chlorophyll-a concentration, can be derived from the top-of-atmosphere radiances measured by imaging sensors on earth-orbiting satellites. There are currently three National Aeronautics and Space Administration sensors in orbit capable of providing ocean color products. One of these sensors is the Moderate Resolution Imaging Spectroradiometer (MODIS) on the Aqua satellite, whose ocean color products are currently the most widely used of the three. A recent improvement to the MODIS calibration methodology has used land targets to improve the calibration accuracy. This study evaluates the new calibration methodology and describes further calibration improvements that are built upon the new methodology by including ocean measurements in the form of global temporally averaged water-leaving reflectance measurements. The calibration improvements presented here mainly modify the calibration at the scan edges, taking advantage of the good performance of the land target trending in the center of the scan.

  8. Calibrating nacelle lidars

    DEFF Research Database (Denmark)

    Courtney, Michael

    Nacelle mounted, forward looking wind lidars are beginning to be used to provide reference wind speed measurements for the power performance testing of wind turbines. In such applications, a formal calibration procedure with a corresponding uncertainty assessment will be necessary. This report...... presents four concepts for performing such a nacelle lidar calibration. Of the four methods, two are found to be immediately relevant and are pursued in some detail. The first of these is a line of sight calibration method in which both lines of sight (for a two beam lidar) are individually calibrated...... a representative distribution of radial wind speeds. An alternative method is to place the nacelle lidar on the ground and incline the beams upwards to bisect a mast equipped with reference instrumentation at a known height and range. This method will be easier and faster to implement and execute but the beam...

  9. SRHA calibration curve

    Data.gov (United States)

    U.S. Environmental Protection Agency — an UV calibration curve for SRHA quantitation. This dataset is associated with the following publication: Chang, X., and D. Bouchard. Surfactant-Wrapped Multiwalled...

  10. Air Data Calibration Facility

    Data.gov (United States)

    Federal Laboratory Consortium — This facility is for low altitude subsonic altimeter system calibrations of air vehicles. Mission is a direct support of the AFFTC mission. Postflight data merge is...

  11. SPOTS Calibration Example

    Directory of Open Access Journals (Sweden)

    Patterson E.

    2010-06-01

    Full Text Available The results are presented using the procedure outlined by the Standardisation Project for Optical Techniques of Strain measurement to calibrate a digital image correlation system. The process involves comparing the experimental data obtained with the optical measurement system to the theoretical values for a specially designed specimen. The standard states the criteria which must be met in order to achieve successful calibration, in addition to quantifying the measurement uncertainty in the system. The system was evaluated at three different displacement load levels, generating strain ranges from 289 µstrain to 2110 µstrain. At the 289 µstrain range, the calibration uncertainty was found to be 14.1 µstrain, and at the 2110 µstrain range it was found to be 28.9 µstrain. This calibration procedure was performed without painting a speckle pattern on the surface of the metal. Instead, the specimen surface was prepared using different grades of grit paper to produce the desired texture.

  12. Calibrated Properties Model

    Energy Technology Data Exchange (ETDEWEB)

    C. Ahlers; H. Liu

    2000-03-12

    The purpose of this Analysis/Model Report (AMR) is to document the Calibrated Properties Model that provides calibrated parameter sets for unsaturated zone (UZ) flow and transport process models for the Yucca Mountain Site Characterization Project (YMP). This work was performed in accordance with the ''AMR Development Plan for U0035 Calibrated Properties Model REV00. These calibrated property sets include matrix and fracture parameters for the UZ Flow and Transport Model (UZ Model), drift seepage models, drift-scale and mountain-scale coupled-processes models, and Total System Performance Assessment (TSPA) models as well as Performance Assessment (PA) and other participating national laboratories and government agencies. These process models provide the necessary framework to test conceptual hypotheses of flow and transport at different scales and predict flow and transport behavior under a variety of climatic and thermal-loading conditions.

  13. Traceable Pyrgeometer Calibrations

    Energy Technology Data Exchange (ETDEWEB)

    Dooraghi, Mike; Kutchenreiter, Mark; Reda, Ibrahim; Habte, Aron; Sengupta, Manajit; Andreas, Afshin; Newman, Martina; Webb, Craig

    2016-05-02

    This presentation provides a high-level overview of the progress on the Broadband Outdoor Radiometer Calibrations for all shortwave and longwave radiometers that are deployed by the Atmospheric Radiation Measurement program.

  14. Calibration of photon counting imaging microchannel plate detectors for EUV astronomy

    Science.gov (United States)

    Siegmund, O. H. W.; Vallerga, J.; Jelinsky, P.

    1986-01-01

    The calibration of photon counting imaging detectors for satellite based EUV astronomy is a complex process designed to ensure the validity of the data received 'in orbit'. The methods developed to accomplish calibration of microchannel plate detectors for the Extreme Ultraviolet Explorer are described and illustrated. The characterization of these detectors can be subdivided into three categories: stabilization, performance tests, and environmental tests.

  15. Calibration of the Nustar High-Energy Focusing X-Ray Telescope

    DEFF Research Database (Denmark)

    Madsen, Kristin K.; Harrison, Fiona A.; Markwardt, Craig B.

    2015-01-01

    We present the calibration of the Nuclear Spectroscopic Telescope Array (NuSTAR) X-ray satellite. We used the Crab as the primary effective area calibrator and constructed a piece-wise linear spline function to modify the vignetting response. The achieved residuals for all off-axis angles...

  16. Calibrating nacelle lidars

    OpenAIRE

    Courtney, Michael

    2013-01-01

    Nacelle mounted, forward looking wind lidars are beginning to be used to provide reference wind speed measurements for the power performance testing of wind turbines. In such applications, a formal calibration procedure with a corresponding uncertainty assessment will be necessary. This report presents four concepts for performing such a nacelle lidar calibration. Of the four methods, two are found to be immediately relevant and are pursued in some detail.The first of these is a line of sight...

  17. Scanner calibration revisited.

    Science.gov (United States)

    Pozhitkov, Alexander E

    2010-07-01

    Calibration of a microarray scanner is critical for accurate interpretation of microarray results. Shi et al. (BMC Bioinformatics, 2005, 6, Art. No. S11 Suppl. 2.) reported usage of a Full Moon BioSystems slide for calibration. Inspired by the Shi et al. work, we have calibrated microarray scanners in our previous research. We were puzzled however, that most of the signal intensities from a biological sample fell below the sensitivity threshold level determined by the calibration slide. This conundrum led us to re-investigate the quality of calibration provided by the Full Moon BioSystems slide as well as the accuracy of the analysis performed by Shi et al. Signal intensities were recorded on three different microarray scanners at various photomultiplier gain levels using the same calibration slide from Full Moon BioSystems. Data analysis was conducted on raw signal intensities without normalization or transformation of any kind. Weighted least-squares method was used to fit the data. We found that initial analysis performed by Shi et al. did not take into account autofluorescence of the Full Moon BioSystems slide, which led to a grossly distorted microarray scanner response. Our analysis revealed that a power-law function, which is explicitly accounting for the slide autofluorescence, perfectly described a relationship between signal intensities and fluorophore quantities. Microarray scanners respond in a much less distorted fashion than was reported by Shi et al. Full Moon BioSystems calibration slides are inadequate for performing calibration. We recommend against using these slides.

  18. Scanner calibration revisited

    Directory of Open Access Journals (Sweden)

    Pozhitkov Alexander E

    2010-07-01

    Full Text Available Abstract Background Calibration of a microarray scanner is critical for accurate interpretation of microarray results. Shi et al. (BMC Bioinformatics, 2005, 6, Art. No. S11 Suppl. 2. reported usage of a Full Moon BioSystems slide for calibration. Inspired by the Shi et al. work, we have calibrated microarray scanners in our previous research. We were puzzled however, that most of the signal intensities from a biological sample fell below the sensitivity threshold level determined by the calibration slide. This conundrum led us to re-investigate the quality of calibration provided by the Full Moon BioSystems slide as well as the accuracy of the analysis performed by Shi et al. Methods Signal intensities were recorded on three different microarray scanners at various photomultiplier gain levels using the same calibration slide from Full Moon BioSystems. Data analysis was conducted on raw signal intensities without normalization or transformation of any kind. Weighted least-squares method was used to fit the data. Results We found that initial analysis performed by Shi et al. did not take into account autofluorescence of the Full Moon BioSystems slide, which led to a grossly distorted microarray scanner response. Our analysis revealed that a power-law function, which is explicitly accounting for the slide autofluorescence, perfectly described a relationship between signal intensities and fluorophore quantities. Conclusions Microarray scanners respond in a much less distorted fashion than was reported by Shi et al. Full Moon BioSystems calibration slides are inadequate for performing calibration. We recommend against using these slides.

  19. Approximation Behooves Calibration

    DEFF Research Database (Denmark)

    da Silva Ribeiro, André Manuel; Poulsen, Rolf

    2013-01-01

    Calibration based on an expansion approximation for option prices in the Heston stochastic volatility model gives stable, accurate, and fast results for S&P500-index option data over the period 2005–2009.......Calibration based on an expansion approximation for option prices in the Heston stochastic volatility model gives stable, accurate, and fast results for S&P500-index option data over the period 2005–2009....

  20. Improving Planck calibration by including frequency-dependent relativistic corrections

    CERN Document Server

    Quartin, Miguel

    2015-01-01

    The Planck satellite detectors are calibrated in the 2015 release using the "orbital dipole", which is the time-dependent dipole generated by the Doppler effect due to the motion of the satellite around the Sun. Such an effect has also relativistic time-dependent corrections of relative magnitude 10^(-3), due to coupling with the "solar dipole" (the motion of the Sun compared to the CMB rest frame), which are included in the data calibration by the Planck collaboration. We point out that such corrections are subject to a frequency-dependent multiplicative factor. This factor differs from unity especially at the highest frequencies, relevant for the HFI instrument. Since currently Planck calibration errors are dominated by systematics, to the point that polarization data is currently unreliable at large scales, such a correction can in principle be highly relevant for future data releases.

  1. Improving Planck calibration by including frequency-dependent relativistic corrections

    Science.gov (United States)

    Quartin, Miguel; Notari, Alessio

    2015-09-01

    The Planck satellite detectors are calibrated in the 2015 release using the "orbital dipole", which is the time-dependent dipole generated by the Doppler effect due to the motion of the satellite around the Sun. Such an effect has also relativistic time-dependent corrections of relative magnitude 10-3, due to coupling with the "solar dipole" (the motion of the Sun compared to the CMB rest frame), which are included in the data calibration by the Planck collaboration. We point out that such corrections are subject to a frequency-dependent multiplicative factor. This factor differs from unity especially at the highest frequencies, relevant for the HFI instrument. Since currently Planck calibration errors are dominated by systematics, to the point that polarization data is currently unreliable at large scales, such a correction can in principle be highly relevant for future data releases.

  2. Energy calibration via correlation

    CERN Document Server

    Maier, Daniel

    2015-01-01

    The main task of an energy calibration is to find a relation between pulse-height values and the corresponding energies. Doing this for each pulse-height channel individually requires an elaborated input spectrum with an excellent counting statistics and a sophisticated data analysis. This work presents an easy to handle energy calibration process which can operate reliably on calibration measurements with low counting statistics. The method uses a parameter based model for the energy calibration and concludes on the optimal parameters of the model by finding the best correlation between the measured pulse-height spectrum and multiple synthetic pulse-height spectra which are constructed with different sets of calibration parameters. A CdTe-based semiconductor detector and the line emissions of an 241 Am source were used to test the performance of the correlation method in terms of systematic calibration errors for different counting statistics. Up to energies of 60 keV systematic errors were measured to be le...

  3. Calibrating nacelle lidars

    Energy Technology Data Exchange (ETDEWEB)

    Courtney, M.

    2013-01-15

    Nacelle mounted, forward looking wind lidars are beginning to be used to provide reference wind speed measurements for the power performance testing of wind turbines. In such applications, a formal calibration procedure with a corresponding uncertainty assessment will be necessary. This report presents four concepts for performing such a nacelle lidar calibration. Of the four methods, two are found to be immediately relevant and are pursued in some detail. The first of these is a line of sight calibration method in which both lines of sight (for a two beam lidar) are individually calibrated by accurately aligning the beam to pass close to a reference wind speed sensor. A testing procedure is presented, reporting requirements outlined and the uncertainty of the method analysed. It is seen that the main limitation of the line of sight calibration method is the time required to obtain a representative distribution of radial wind speeds. An alternative method is to place the nacelle lidar on the ground and incline the beams upwards to bisect a mast equipped with reference instrumentation at a known height and range. This method will be easier and faster to implement and execute but the beam inclination introduces extra uncertainties. A procedure for conducting such a calibration is presented and initial indications of the uncertainties given. A discussion of the merits and weaknesses of the two methods is given together with some proposals for the next important steps to be taken in this work. (Author)

  4. Calibration of the ISEE plasma composition experiment

    Science.gov (United States)

    Baugher, C. R.; Olsen, R. C.; Reasoner, D. L.

    1986-01-01

    The Plasma Composition experiment on the ISEE-1 satellite was designed to measure ions from 1 to 16 amu, at energies from near zero to 16 keV. The two nearly identical flight instruments were calibrated by means of preflight laboratory tests and in-flight data comparisons. This document presents most of the details of those efforts, with special emphasis on the low energy (0 to 100 eV) portion of the instrument response. The analysis of the instrument includes a ray-tracing calculation, which follows an ensemble of test particles through the detector.

  5. Stream Gauges and Satellite Measurements

    Science.gov (United States)

    Alsdorf, D. E.

    2010-12-01

    Satellite measurements should not be viewed as a replacement for stream gauges. However, occasionally it is suggested that because satellite-based measurements can provide river discharge, a motivation for satellite approaches is an increasing lack of stream gauges. This is an argument for more stream gauges, but not necessarily for satellite measurements. Rather, in-situ and spaceborne methods of estimating discharge are complementary. Stream gauges provide frequent measurements at one point in the river reach whereas satellites have the potential to measure throughout all reaches but at orbital repeat intervals of days to weeks. The Surface Water and Ocean Topography satellite mission (SWOT) is an opportunity to further develop these complements. The motivation for SWOT, and indeed for any satellite based method of estimating discharge, should not be as a replacement for stream gauges. Scientific and application uses should motivate the measurements. For example, understanding floods with their dynamic water surfaces are best sampled from remote platforms that provide water surface elevations throughout the floodwave. As another example, today’s water and energy balance models are giving outputs at increasing spatial resolution and are making use of water surface elevations throughout the modeled basin. These models require a similar resolution in the calibrating and validating observations. We should also be aware of practical limitations. In addition to providing spatially distributed hydrodynamic measurements on rivers, SWOT will be able to measure storage changes in the estimated 30 million lakes in the world that are larger than a hectare. Knowing the storage changes in these lakes is especially important in certain regions such as the Arctic but gauging even a small fraction of these is impractical. Another motivator for satellite methods is that even in the presence of stream gauges, discharge data is not always well shared throughout all countries

  6. Reinforcing and expanding the predictions of the disturbance vicariance hypothesis in Amazonian harlequin frogs: A molecular phylogenetic and climate envelope modelling approach

    OpenAIRE

    Lötters, Stefan; van der Meijden, Arie; Rödder, Dennis; Köster, Timo E.; Kraus, Tanja; La Marca, Enrique; Haddad, Célio F B; Veith, Michael

    2010-01-01

    The disturbance vicariance hypothesis (DV) has been proposed to explain speciation in Amazonia, especially its edge regions, e. g. in eastern Guiana Shield harlequin frogs (Atelopus) which are suggested to have derived from a cool-adapted Andean ancestor. In concordance with DV predictions we studied that (i) these amphibians display a natural distribution gap in central Amazonia; (ii) east of this gap they constitute a monophyletic lineage which is nested within a pre-Andean/western clade; (...

  7. Effects over time of self-reported direct and vicarious racial discrimination on depressive symptoms and loneliness among Australian school students.

    Science.gov (United States)

    Priest, Naomi; Perry, Ryan; Ferdinand, Angeline; Kelaher, Margaret; Paradies, Yin

    2017-02-03

    Racism and racial discrimination are increasingly acknowledged as a critical determinant of health and health inequalities. However, patterns and impacts of racial discrimination among children and adolescents remain under-investigated, including how different experiences of racial discrimination co-occur and influence health and development over time. This study examines associations between self-reported direct and vicarious racial discrimination experiences and loneliness and depressive symptoms over time among Australian school students. Across seven schools, 142 students (54.2% female), age at T1 from 8 to 15 years old (M = 11.14, SD = 2.2), and from diverse racial/ethnic and migration backgrounds (37.3% born in English-speaking countries as were one or both parents) self-reported racial discrimination experiences (direct and vicarious) and mental health (depressive symptoms and loneliness) at baseline and 9 months later at follow up. A full cross-lagged panel design was modelled using MPLUS v.7 with all variables included at both time points. A cross-lagged effect of perceived direct racial discrimination on later depressive symptoms and on later loneliness was found. As expected, the effect of direct discrimination on both health outcomes was unidirectional as mental health did not reciprocally influence reported racism. There was no evidence that vicarious racial discrimination influenced either depressive symptoms or loneliness beyond the effect of direct racial discrimination. Findings suggest direct racial discrimination has a persistent effect on depressive symptoms and loneliness among school students over time. Future work to explore associations between direct and vicarious discrimination is required.

  8. Effects over time of self-reported direct and vicarious racial discrimination on depressive symptoms and loneliness among Australian school students

    OpenAIRE

    Priest, Naomi; Perry, Ryan; Ferdinand, Angeline; Kelaher, Margaret; Paradies, Yin

    2017-01-01

    Background Racism and racial discrimination are increasingly acknowledged as a critical determinant of health and health inequalities. However, patterns and impacts of racial discrimination among children and adolescents remain under-investigated, including how different experiences of racial discrimination co-occur and influence health and development over time. This study examines associations between self-reported direct and vicarious racial discrimination experiences and loneliness and de...

  9. Career Coaches as a Source of Vicarious Learning for Racial and Ethnic Minority PhD Students in the Biomedical Sciences: A Qualitative Study

    Science.gov (United States)

    Williams, Simon N.; Thakore, Bhoomi K.; McGee, Richard

    2016-01-01

    Introduction Many recent mentoring initiatives have sought to help improve the proportion of underrepresented racial and ethnic minorities (URMs) in academic positions across the biomedical sciences. However, the intractable nature of the problem of underrepresentation suggests that many young scientists may require supplemental career development beyond what many mentors are able to offer. As an adjunct to traditional scientific mentoring, we created a novel academic career “coaching” intervention for PhD students in the biomedical sciences. Objective To determine whether and how academic career coaches can provide effective career-development-related learning experiences for URM PhD students in the biomedical sciences. We focus specifically on vicarious learning experiences, where individuals learn indirectly through the experiences of others. Method The intervention is being tested as part of a longitudinal randomized control trial (RCT). Here, we describe a nested qualitative study, using a framework approach to analyze data from a total of 48 semi-structured interviews from 24 URM PhD students (2 interviews per participant, 1 at baseline, 1 at 12-month follow-up) (16 female, 8 male; 11 Black, 12 Hispanic, 1 Native-American). We explored the role of the coach as a source of vicarious learning, in relation to the students’ goal of being future biomedical science faculty. Results Coaches were resources through which most students in the study were able to learn vicariously about how to pursue, and succeed within, an academic career. Coaches were particularly useful in instances where students’ research mentors are unable to provide such vicarious learning opportunities, for example because the mentor is too busy to have career-related discussions with a student, or because they have, or value, a different type of academic career to the type the student hopes to achieve. Implications Coaching can be an important way to address the lack of structured career

  10. Evaluating NOx Emissions Using Satellite Observations

    Science.gov (United States)

    Frost, G. J.; Kim, S.; Brioude, J.; McKeen, S. A.; Trainer, M.; Heckel, A.; Hilboll, A.; Richter, A.; Burrows, J. P.; Gleason, J. F.; Boersma, K. F.; Hsie, E.; Lee, S.; Angevine, W. M.; Granier, C.; Peischl, J.; Ryerson, T. B.; Fehsenfeld, F. C.

    2012-12-01

    Atmospheric NO2 columns retrieved from satellites can provide a useful top-down assessment of bottom-up NOx emissions inventories. We present three case studies of an approach to evaluate NOx emissions at a sector level by comparing satellite retrievals to regional chemical-transport model calculations of NO2 columns. In the first example, the atmospheric impact of implementing NOx controls at eastern US power plants is demonstrated. In the second study, we use NOx monitors at western US power plants to calibrate our satellite-model comparisons. We then apply our approach to evaluate bottom-up estimates of NOx emissions from western US cities. In the third example, we validate our satellite-model approach using in-situ aircraft measurements and assess NOx emissions from power plants, cities, industrial facilities, and ports in eastern Texas. We conclude with some general insights on the usefulness of this approach and suggestions for future areas of research.

  11. The uplift of Qinghai-Xizang (Tibet) Plateau and the vicariance speciation of glyptosternoid fishes (Siluriformes:Sisoridae)

    Institute of Scientific and Technical Information of China (English)

    HE; Shunping; (

    2001-01-01

    [1]Hora, S. L., Silas, E. G., Evolution and distribution of glyptosternoid fishes of the family Sisoridae (Order: Siluroidea), Proc. Nati. Inst. Sci. India, 1952, 18: 309-322.[2]He, S., The phylogeny of the glyptosternoid fishes (Teleostei: Siluriformes, Sisoridae), Cybium, 1996, 20(2): 115-159.[3]Nelson, G., Platnick, N., Systematics and Biogeography, Cladistics and Vicariance, New York: Columbia Univ. Press, 1981.[4]Rosen, D. E., A vicariance model of Caribbean biogeography, Syst. Zool., 1976, 24: 431-464.[5]Brooks, D. R., Hennig's parasitological method: A proposed solution, Syst. Zool., 1981, 30: 229-249 .[6]Ren, X., Cui, J., Yu, Q., The karyatype and NOR haploid in Glyptosternum maculatum, Genetics, 1992, 14(6): 10-11.[7]Chu, X., Systematics and evolutionary pedigree of the glyptosternoid fishes (Family Sisoridae), Act. Zootaxon. Sinica, 1997, 4(1): 72-82.[8]Datta, A. K., Zoological results of the Indian Cho-Oyu Expedition, Rec. Indian Mus., 1962, 41(4): 437-450.[9]Zhang, Q., Li, B. et al., On the Pliocene palaeogeography and the uplift of the Qinghai-Xizang plateau, in Studies on the Period, Amplitude and Type of the Uplift of the Qinghai-Xizang Plateau, Beijing: Science Press,1981, 26-39.[10]Swofford, D. L., PAUP: Phylogenetic Analysis Using Parsimony, version 4.0, 1998.[11]Chung, C. L., Lee, T., Zhang, Y. et al., Diachronous uplift of the Tibetan plateau starting 40 Myr ago, Nature, 1998, 394: 769-773.[12]Ji, H., Huang, W., Chen, W. et al., The discovery of the Hipparion fauna in Xizang and its significance on the problem of the uplift of the plateau, in Studies on the Period, Amplitude and Type of the Uplift of the Qinghai-Xizang Plateau, Beijing: Science Press, 1981, 19-25.[13]Hora, S. L., The game fishes of Indian, Part VI. The Goonch, Bagarius bagarius (Hamilton), J. Bombay Nat. Hist. Soc., 1939, 583-593.[14]Chang, C., Pan, Y., A brief discussion on the tectonic evolution of Qinghai-Xizang plateau

  12. Historical Biogeography of a Clade of Liolaemus (Iguania: Liolaemidae based on ancestral areas and dispersal-vicariance analysis (DIVA

    Directory of Open Access Journals (Sweden)

    Juan Manuel Díaz Gómez

    2006-01-01

    Full Text Available Although many phylogenetic studies have been made on the genus Liolaemus, they are inappropriate for a biogeographic study because of incomplete taxon sampling. Here we develop a biogeographic analysis using a new phylogenetic study of the chiliensis group, which differs from the other studies in having his members fully represented. The biogeographic analysis presented here consists in reconstructing the ancestral area of this clade, under three different methods of analysis: Fitch Optimisation, Dispersal Vicariance Analysis and Weighted Ancestral Area Analysis. The analyses were made on phylogenies from parsimony under equally weighted characters, as well as under implied weighting. The equally weighted tree recovers most of the groupings proposed in previous studies. The strict consensus of the implied weighting trees recovers fifteen groups, but there is no agreement of the relationships between those groups. The ancestral area analyses agree in an Andean-Patagonian origin for the chiliensis clade, and are congruent with previous hypotheses and paleontological data.Ainda que tenham sido feito muitos estudos filogenéticos no gênero Liolaemus, os mesmos não são apropriados para uma análise biogeográfica, porque não possuem uma amostragem taxonômica adequada. Desenvolve-se neste trabalho, uma análise biogeográfica do grupo de L. chiliensis, que se diferencia das contribuições prévias por representar a todos os membros do grupo. A análise biogeográfica consiste em reconstruir a área ancestral deste clado, utilizando três métodos diferentes: Otimização de Fitch, Análise de Dispersão-Vicariância e Áreas Ancestrais Pesadas. As análises foram realizadas em filogenias feitas com o critério de parsimônia sob pesos iguais e pesos implicados. A árvore obtida sob pesos iguais, recupera a maioria dos grupos encontrados em análises prévias. O consenso estrito das árvores de pesos implicados, recupera quinze grupos, mas n

  13. CEOS visualization environment (COVE) tool for intercalibration of satellite instruments

    Science.gov (United States)

    Kessler, P.D.; Killough, B.D.; Gowda, S.; Williams, B.R.; Chander, G.; Qu, Min

    2013-01-01

    Increasingly, data from multiple instruments are used to gain a more complete understanding of land surface processes at a variety of scales. Intercalibration, comparison, and coordination of satellite instrument coverage areas is a critical effort of international and domestic space agencies and organizations. The Committee on Earth Observation Satellites Visualization Environment (COVE) is a suite of browser-based applications that leverage Google Earth to display past, present, and future satellite instrument coverage areas and coincident calibration opportunities. This forecasting and ground coverage analysis and visualization capability greatly benefits the remote sensing calibration community in preparation for multisatellite ground calibration campaigns or individual satellite calibration studies. COVE has been developed for use by a broad international community to improve the efficiency and efficacy of such calibration planning efforts, whether those efforts require past, present, or future predictions. This paper provides a brief overview of the COVE tool, its validation, accuracies, and limitations with emphasis on the applicability of this visualization tool for supporting ground field campaigns and intercalibration of satellite instruments.

  14. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AOS has shown that it is feasible to use the combined NASA/SBIR resources from Phases I and II to: (i) Build a turn-key analyzer system that has the...

  15. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We are proposing to develop high altitude CO2 analyzer technology that can be deployed on the research aircraft of NASA's Airborne Science Program (ASP). The...

  16. HAWC Timing Calibration

    CERN Document Server

    Huentemeyer, Petra; Dingus, Brenda

    2009-01-01

    The High-Altitude Water Cherenkov (HAWC) Experiment is a second-generation highsensitivity gamma-ray and cosmic-ray detector that builds on the experience and technology of the Milagro observatory. Like Milagro, HAWC utilizes the water Cherenkov technique to measure extensive air showers. Instead of a pond filled with water (as in Milagro) an array of closely packed water tanks is used. The event direction will be reconstructed using the times when the PMTs in each tank are triggered. Therefore, the timing calibration will be crucial for reaching an angular resolution as low as 0.25 degrees.We propose to use a laser calibration system, patterned after the calibration system in Milagro. Like Milagro, the HAWC optical calibration system will use ~1 ns laser light pulses. Unlike Milagro, the PMTs are optically isolated and require their own optical fiber calibration. For HAWC the laser light pulses will be directed through a series of optical fan-outs and fibers to illuminate the PMTs in approximately one half o...

  17. Calibration Under Uncertainty.

    Energy Technology Data Exchange (ETDEWEB)

    Swiler, Laura Painton; Trucano, Timothy Guy

    2005-03-01

    This report is a white paper summarizing the literature and different approaches to the problem of calibrating computer model parameters in the face of model uncertainty. Model calibration is often formulated as finding the parameters that minimize the squared difference between the model-computed data (the predicted data) and the actual experimental data. This approach does not allow for explicit treatment of uncertainty or error in the model itself: the model is considered the %22true%22 deterministic representation of reality. While this approach does have utility, it is far from an accurate mathematical treatment of the true model calibration problem in which both the computed data and experimental data have error bars. This year, we examined methods to perform calibration accounting for the error in both the computer model and the data, as well as improving our understanding of its meaning for model predictability. We call this approach Calibration under Uncertainty (CUU). This talk presents our current thinking on CUU. We outline some current approaches in the literature, and discuss the Bayesian approach to CUU in detail.

  18. Geostationary Satellite (GOES) Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Visible and Infrared satellite imagery taken from radiometer instruments on SMS (ATS) and GOES satellites in geostationary orbit. These satellites produced...

  19. Neptune's small satellites

    Science.gov (United States)

    Thomas, P.

    1992-04-01

    The small satellites of Neptune and other planets discovered during the Voyager 2 mission are discussed in terms of their composition and relationship to the planetary systems. The satellite Proteus is described in terms of its orbit, five other satellites are described, and they are compared to ther small satellites and systems. Neptune's satellites are hypothesized to be related to the ring system, and the satellite Galatea is related to the confinement of the rings.

  20. TARGETLESS CAMERA CALIBRATION

    Directory of Open Access Journals (Sweden)

    L. Barazzetti

    2012-09-01

    Full Text Available In photogrammetry a camera is considered calibrated if its interior orientation parameters are known. These encompass the principal distance, the principal point position and some Additional Parameters used to model possible systematic errors. The current state of the art for automated camera calibration relies on the use of coded targets to accurately determine the image correspondences. This paper presents a new methodology for the efficient and rigorous photogrammetric calibration of digital cameras which does not require any longer the use of targets. A set of images depicting a scene with a good texture are sufficient for the extraction of natural corresponding image points. These are automatically matched with feature-based approaches and robust estimation techniques. The successive photogrammetric bundle adjustment retrieves the unknown camera parameters and their theoretical accuracies. Examples, considerations and comparisons with real data and different case studies are illustrated to show the potentialities of the proposed methodology.

  1. Calibration Systems Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Myers, Tanya L.; Broocks, Bryan T.; Phillips, Mark C.

    2006-02-01

    The Calibration Systems project at Pacific Northwest National Laboratory (PNNL) is aimed towards developing and demonstrating compact Quantum Cascade (QC) laser-based calibration systems for infrared imaging systems. These on-board systems will improve the calibration technology for passive sensors, which enable stand-off detection for the proliferation or use of weapons of mass destruction, by replacing on-board blackbodies with QC laser-based systems. This alternative technology can minimize the impact on instrument size and weight while improving the quality of instruments for a variety of missions. The potential of replacing flight blackbodies is made feasible by the high output, stability, and repeatability of the QC laser spectral radiance.

  2. Ibis ground calibration

    Energy Technology Data Exchange (ETDEWEB)

    Bird, A.J.; Barlow, E.J.; Tikkanen, T. [Southampton Univ., School of Physics and Astronomy (United Kingdom); Bazzano, A.; Del Santo, M.; Ubertini, P. [Istituto di Astrofisica Spaziale e Fisica Cosmica - IASF/CNR, Roma (Italy); Blondel, C.; Laurent, P.; Lebrun, F. [CEA Saclay - Sap, 91 - Gif sur Yvette (France); Di Cocco, G.; Malaguti, E. [Istituto di Astrofisica Spaziale e Fisica-Bologna - IASF/CNR (Italy); Gabriele, M.; La Rosa, G.; Segreto, A. [Istituto di Astrofisica Spaziale e Fisica- IASF/CNR, Palermo (Italy); Quadrini, E. [Istituto di Astrofisica Spaziale e Fisica-Cosmica, EASF/CNR, Milano (Italy); Volkmer, R. [Institut fur Astronomie und Astrophysik, Tubingen (Germany)

    2003-11-01

    We present an overview of results obtained from IBIS ground calibrations. The spectral and spatial characteristics of the detector planes and surrounding passive materials have been determined through a series of calibration campaigns. Measurements of pixel gain, energy resolution, detection uniformity, efficiency and imaging capability are presented. The key results obtained from the ground calibration have been: - optimization of the instrument tunable parameters, - determination of energy linearity for all detection modes, - determination of energy resolution as a function of energy through the range 20 keV - 3 MeV, - demonstration of imaging capability in each mode, - measurement of intrinsic detector non-uniformity and understanding of the effects of passive materials surrounding the detector plane, and - discovery (and closure) of various leakage paths through the passive shielding system.

  3. Do we represent intentional action as recursively embedded? The answer must be empirical. A comment on Vicari and Adenzato (2014).

    Science.gov (United States)

    Martins, Mauricio D; Fitch, W Tecumseh

    2015-12-15

    The relationship between linguistic syntax and action planning is of considerable interest in cognitive science because many researchers suggest that "motor syntax" shares certain key traits with language. In a recent manuscript in this journal, Vicari and Adenzato (henceforth VA) critiqued Hauser, Chomsky and Fitch's 2002 (henceforth HCF's) hypothesis that recursion is language-specific, and that its usage in other domains is parasitic on language resources. VA's main argument is that HCF's hypothesis is falsified by the fact that recursion typifies the structure of intentional action, and recursion in the domain of action is independent of language. Here, we argue that VA's argument is incomplete, and that their formalism can be contrasted with alternative frameworks that are equally consistent with existing data. Therefore their conclusions are premature without further empirical testing and support. In particular, to accept VA's argument it would be necessary to demonstrate both that humans in fact represent self-embedding in the structure of intentional action, and that language is not used to construct these representations.

  4. The uplift of Qinghai-Xizang (Tibet) Plateau and the vicariance speciation of glyptosternoid fishes (Siluriformes:Sisoridae)

    Institute of Scientific and Technical Information of China (English)

    何舜平; 曹文宣; 陈宜瑜

    2001-01-01

    Based on the phylogenetic and biogeographical studies of the glyptosternoid fishes in Qinghai-Tibet area, the following hypothesis is proposed: the speciation of this group has a direct relationship with the three uplift intervals of the Qinghai-Tibet Plateau. This process was explained by the theory of vicariance of biogeography. The ancestor of this group was similar to Bagarus and/or Glyptothorax, which still have a wide distribution. At the moment when the Tethys sea closed, the Indian tectonic plate collided with the Eurasian tectonic plate, so the Glyptothorax-like and Bagarus-like ancestors entered Eurasia and gradually became widely distributed. After the Pleistocene, with the enforced colliding, the gradual uplift of the Qinghai-Tibet Plateau brought about the current water environment, and the Glyptosternoids were generated from Glyptothorax-like fish under this environment. The present Glyptosternum, distributed across the Himalayas is the ancestor of Glyptosternoids. In the three uplift intervals of the plateau, the water system of this region was separated gradually and Glyptosternum-like ancestor was isolated in different rivers and evolved into various species. All this resulted in the speciation and formation of the biogeographical pattern of glyptosternoids.

  5. Assessing the impact of vicarious experiences on preservice elementary science teacher efficacy and preservice elementary teacher efficacy

    Science.gov (United States)

    Wagler, Ronald Robert

    Scope and method of study. The purpose of this study was to investigate the impact of vicarious experiences (preservice teacher field experiences) on perceived preservice science teacher efficacy and perceived preservice teacher efficacy. The participants for the study were 46 preservice elementary education students who were enrolled in CIED 3430 (Early Lab and Clinical Experience in Elementary Education II) at a large Midwestern state university and 20 classroom inservice teachers. A pretest was administered early in the spring 2007 semester, before the preservice teachers did their field experience and consisted of demographic questions and the STEBI-B. A posttest was administered at the end of the spring 2007 semester, after the preservice teachers had completed their field experiences, and consisted of demographic questions, a rating of the teachers they observed during their educational field experience, the STEBI-B and the TES. The field experience classroom inservice teachers provided personal, professional, and classroom data in the middle of the spring 2007 semester. All data were analyzed using analysis of variance (ANOVA) and analysis of covariance (ANCOVA). Findings and conclusions. Factors of gender, ethnicity, socioeconomic status and preservice teacher program placement were found to be significant predictors of preservice teachers' efficacy scores. Even though, in some cases, these factors negatively impacted preservice teacher efficacy, preservice teachers should be placed in these environments when support is most available. The Teacher Efficacy Scale (Gibson & Dembo, 1984) is invalid. Even the construct of a general teacher efficacy is questionable.

  6. Calibrating Legal Judgments

    Directory of Open Access Journals (Sweden)

    Frederick Schauer

    2017-09-01

    Full Text Available Objective to study the notion and essence of legal judgments calibration the possibilities of using it in the lawenforcement activity to explore the expenses and advantages of using it. Methods dialectic approach to the cognition of social phenomena which enables to analyze them in historical development and functioning in the context of the integrity of objective and subjective factors it determined the choice of the following research methods formallegal comparative legal sociological methods of cognitive psychology and philosophy. Results In ordinary life people who assess other peoplersaquos judgments typically take into account the other judgments of those they are assessing in order to calibrate the judgment presently being assessed. The restaurant and hotel rating website TripAdvisor is exemplary because it facilitates calibration by providing access to a raterrsaquos previous ratings. Such information allows a user to see whether a particular rating comes from a rater who is enthusiastic about every place she patronizes or instead from someone who is incessantly hard to please. And even when less systematized as in assessing a letter of recommendation or college transcript calibration by recourse to the decisional history of those whose judgments are being assessed is ubiquitous. Yet despite the ubiquity and utility of such calibration the legal system seems perversely to reject it. Appellate courts do not openly adjust their standard of review based on the previous judgments of the judge whose decision they are reviewing nor do judges in reviewing legislative or administrative decisions magistrates in evaluating search warrant representations or jurors in assessing witness perception. In most legal domains calibration by reference to the prior decisions of the reviewee is invisible either because it does not exist or because reviewing bodies are unwilling to admit using what they in fact know and employ. Scientific novelty for the first

  7. Iterative Magnetometer Calibration

    Science.gov (United States)

    Sedlak, Joseph

    2006-01-01

    This paper presents an iterative method for three-axis magnetometer (TAM) calibration that makes use of three existing utilities recently incorporated into the attitude ground support system used at NASA's Goddard Space Flight Center. The method combines attitude-independent and attitude-dependent calibration algorithms with a new spinning spacecraft Kalman filter to solve for biases, scale factors, nonorthogonal corrections to the alignment, and the orthogonal sensor alignment. The method is particularly well-suited to spin-stabilized spacecraft, but may also be useful for three-axis stabilized missions given sufficient data to provide observability.

  8. Comparison of satellite reflectance algorithms for estimating ...

    Science.gov (United States)

    We analyzed 10 established and 4 new satellite reflectance algorithms for estimating chlorophyll-a (Chl-a) in a temperate reservoir in southwest Ohio using coincident hyperspectral aircraft imagery and dense water truth collected within one hour of image acquisition to develop simple proxies for algal blooms and to facilitate portability between multispectral satellite imagers for regional algal bloom monitoring. Narrow band hyperspectral aircraft images were upscaled spectrally and spatially to simulate 5 current and near future satellite imaging systems. Established and new Chl-a algorithms were then applied to the synthetic satellite images and then compared to calibrated Chl-a water truth measurements collected from 44 sites within one hour of aircraft acquisition of the imagery. Masks based on the spatial resolution of the synthetic satellite imagery were then applied to eliminate mixed pixels including vegetated shorelines. Medium-resolution Landsat and finer resolution data were evaluated against 29 coincident water truth sites. Coarse-resolution MODIS and MERIS-like data were evaluated against 9 coincident water truth sites. Each synthetic satellite data set was then evaluated for the performance of a variety of spectrally appropriate algorithms with regard to the estimation of Chl-a concentrations against the water truth data set. The goal is to inform water resource decisions on the appropriate satellite data acquisition and processing for the es

  9. Multi-locus fossil-calibrated phylogeny, biogeography and a subgeneric revision of the Margaritiferidae (Mollusca: Bivalvia: Unionoida).

    Science.gov (United States)

    Bolotov, Ivan N; Vikhrev, Ilya V; Bespalaya, Yulia V; Gofarov, Mikhail Y; Kondakov, Alexander V; Konopleva, Ekaterina S; Bolotov, Nikita N; Lyubas, Artyom A

    2016-10-01

    The taxonomy and biogeographic history of the bivalve family Margaritiferidae are controversial because previous molecular studies did not provide a well-resolved phylogenetic framework for these enigmatic freshwater mussels that have extensive but disjunct distribution in North America, Eurasia and North Africa. In this study, we present a new, fossil-calibrated phylogenetic hypothesis based on five molecular markers (∼4kb of total length) for ten species. Our results indicate that all recent margaritiferids are in the single genus, Margaritifera Schumacher, 1816. Additionally, we identified three relatively well-supported phylogenetic clades that are valid subgenera, i.e., Margaritifera s. str. (Holarctic), Margaritanopsis (=Cumberlandia) (southeast North America-southeast Asia disjunct) and Pseudunio (Mediterranean). We suggest that the crown lineage of the Margaritiferidae most likely originated in the Cretaceous (mean age 93Ma, 95% CI 66-126Ma). The combined results of ancestral area reconstructions based on the three different approaches (S-DIVA, DEC and S-DEC) showed that ancient vicariance events could have played an important role in speciation within the family. The rates of mitochondrial evolution of margaritiferids are notably slow, which may be associated with their longevity, long generation time and low metabolic rates. Our findings highlight the complex biogeographic history of the Margaritiferidae as an intermixing of ancient vicariance and dispersal events, which were most likely associated with some inland barriers, continental movements and a sea level dynamic.

  10. Evaluation of ISCCP multisatellite radiance calibration for geostationary imager visible channels using the moon

    Science.gov (United States)

    Stone, Thomas C.; William B. Rossow,; Joseph Ferrier,; Laura M. Hinkelman,

    2013-01-01

    Since 1983, the International Satellite Cloud Climatology Project (ISCCP) has collected Earth radiance data from the succession of geostationary and polar-orbiting meteorological satellites operated by weather agencies worldwide. Meeting the ISCCP goals of global coverage and decade-length time scales requires consistent and stable calibration of the participating satellites. For the geostationary imager visible channels, ISCCP calibration provides regular periodic updates from regressions of radiances measured from coincident and collocated observations taken by Advanced Very High Resolution Radiometer instruments. As an independent check of the temporal stability and intersatellite consistency of ISCCP calibrations, we have applied lunar calibration techniques to geostationary imager visible channels using images of the Moon found in the ISCCP data archive. Lunar calibration enables using the reflected light from the Moon as a stable and consistent radiometric reference. Although the technique has general applicability, limitations of the archived image data have restricted the current study to Geostationary Operational Environmental Satellite and Geostationary Meteorological Satellite series. The results of this lunar analysis confirm that ISCCP calibration exhibits negligible temporal trends in sensor response but have revealed apparent relative biases between the satellites at various levels. However, these biases amount to differences of only a few percent in measured absolute reflectances. Since the lunar analysis examines only the lower end of the radiance range, the results suggest that the ISCCP calibration regression approach does not precisely determine the intercept or the zero-radiance response level. We discuss the impact of these findings on the development of consistent calibration for multisatellite global data sets.

  11. Precise Calibration of a GNSS Antenna Array for Adaptive Beamforming Applications

    Directory of Open Access Journals (Sweden)

    Saeed Daneshmand

    2014-05-01

    Full Text Available The use of global navigation satellite system (GNSS antenna arrays for applications such as interference counter-measure, attitude determination and signal-to-noise ratio (SNR enhancement is attracting significant attention. However, precise antenna array calibration remains a major challenge. This paper proposes a new method for calibrating a GNSS antenna array using live signals and an inertial measurement unit (IMU. Moreover, a second method that employs the calibration results for the estimation of steering vectors is also proposed. These two methods are applied to the receiver in two modes, namely calibration and operation. In the calibration mode, a two-stage optimization for precise calibration is used; in the first stage, constant uncertainties are estimated while in the second stage, the dependency of each antenna element gain and phase patterns to the received signal direction of arrival (DOA is considered for refined calibration. In the operation mode, a low-complexity iterative and fast-converging method is applied to estimate the satellite signal steering vectors using the calibration results. This makes the technique suitable for real-time applications employing a precisely calibrated antenna array. The proposed calibration method is applied to GPS signals to verify its applicability and assess its performance. Furthermore, the data set is used to evaluate the proposed iterative method in the receiver operation mode for two different applications, namely attitude determination and SNR enhancement.

  12. Precise calibration of a GNSS antenna array for adaptive beamforming applications.

    Science.gov (United States)

    Daneshmand, Saeed; Sokhandan, Negin; Zaeri-Amirani, Mohammad; Lachapelle, Gérard

    2014-05-30

    The use of global navigation satellite system (GNSS) antenna arrays for applications such as interference counter-measure, attitude determination and signal-to-noise ratio (SNR) enhancement is attracting significant attention. However, precise antenna array calibration remains a major challenge. This paper proposes a new method for calibrating a GNSS antenna array using live signals and an inertial measurement unit (IMU). Moreover, a second method that employs the calibration results for the estimation of steering vectors is also proposed. These two methods are applied to the receiver in two modes, namely calibration and operation. In the calibration mode, a two-stage optimization for precise calibration is used; in the first stage, constant uncertainties are estimated while in the second stage, the dependency of each antenna element gain and phase patterns to the received signal direction of arrival (DOA) is considered for refined calibration. In the operation mode, a low-complexity iterative and fast-converging method is applied to estimate the satellite signal steering vectors using the calibration results. This makes the technique suitable for real-time applications employing a precisely calibrated antenna array. The proposed calibration method is applied to GPS signals to verify its applicability and assess its performance. Furthermore, the data set is used to evaluate the proposed iterative method in the receiver operation mode for two different applications, namely attitude determination and SNR enhancement.

  13. Adequacy of satellite derived rainfall data for stream flow modeling

    Science.gov (United States)

    Artan, G.; Gadain, Hussein; Smith, Jody L.; Asante, Kwasi; Bandaragoda, C.J.; Verdin, J.P.

    2007-01-01

    Floods are the most common and widespread climate-related hazard on Earth. Flood forecasting can reduce the death toll associated with floods. Satellites offer effective and economical means for calculating areal rainfall estimates in sparsely gauged regions. However, satellite-based rainfall estimates have had limited use in flood forecasting and hydrologic stream flow modeling because the rainfall estimates were considered to be unreliable. In this study we present the calibration and validation results from a spatially distributed hydrologic model driven by daily satellite-based estimates of rainfall for sub-basins of the Nile and Mekong Rivers. The results demonstrate the usefulness of remotely sensed precipitation data for hydrologic modeling when the hydrologic model is calibrated with such data. However, the remotely sensed rainfall estimates cannot be used confidently with hydrologic models that are calibrated with rain gauge measured rainfall, unless the model is recalibrated. ?? Springer Science+Business Media, Inc. 2007.

  14. Smart Calibration of Excavators

    DEFF Research Database (Denmark)

    Bro, Marie; Døring, Kasper; Ellekilde, Lars-Peter

    2005-01-01

    Excavators dig holes. But where is the bucket? The purpose of this report is to treat four different problems concerning calibrations of position indicators for excavators in operation at concrete construction sites. All four problems are related to the question of how to determine the precise ge...

  15. Calibration with Absolute Shrinkage

    DEFF Research Database (Denmark)

    Øjelund, Henrik; Madsen, Henrik; Thyregod, Poul

    2001-01-01

    is suggested to cope with the singular design matrix most often seen in chemometric calibration. Furthermore, the proposed algorithm may be generalized to all convex norms like Sigma/beta (j)/(gamma) where gamma greater than or equal to 1, i.e. a method that continuously varies from ridge regression...

  16. Calibrating Communication Competencies

    Science.gov (United States)

    Surges Tatum, Donna

    2016-11-01

    The Many-faceted Rasch measurement model is used in the creation of a diagnostic instrument by which communication competencies can be calibrated, the severity of observers/raters can be determined, the ability of speakers measured, and comparisons made between various groups.

  17. NVLAP calibration laboratory program

    Energy Technology Data Exchange (ETDEWEB)

    Cigler, J.L.

    1993-12-31

    This paper presents an overview of the progress up to April 1993 in the development of the Calibration Laboratories Accreditation Program within the framework of the National Voluntary Laboratory Accreditation Program (NVLAP) at the National Institute of Standards and Technology (NIST).

  18. CALIBRATION OF PHOSWICH DETECTORS

    NARCIS (Netherlands)

    LEEGTE, HKW; KOLDENHOF, EE; BOONSTRA, AL; WILSCHUT, HW

    1992-01-01

    Two important aspects for the calibration of phoswich detector arrays have been investigated. It is shown that common gate ADCs can be used: The loss in particle identification due to fluctuations in the gate timing in multi-hit events can be corrected for by a simple procedure using the measured ti

  19. Measurement System & Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  20. LOFAR facet calibration

    CERN Document Server

    van Weeren, R J; Hardcastle, M J; Shimwell, T W; Rafferty, D A; Sabater, J; Heald, G; Sridhar, S S; Dijkema, T J; Brunetti, G; Brüggen, M; Andrade-Santos, F; Ogrean, G A; Röttgering, H J A; Dawson, W A; Forman, W R; de Gasperin, F; Jones, C; Miley, G K; Rudnick, L; Sarazin, C L; Bonafede, A; Best, P N; Bîrzan, L; Cassano, R; Chyży, K T; Croston, J H; Ensslin, T; Ferrari, C; Hoeft, M; Horellou, C; Jarvis, M J; Kraft, R P; Mevius, M; Intema, H T; Murray, S S; Orrú, E; Pizzo, R; Simionescu, A; Stroe, A; van der Tol, S; White, G J

    2016-01-01

    LOFAR, the Low-Frequency Array, is a powerful new radio telescope operating between 10 and 240 MHz. LOFAR allows detailed sensitive high-resolution studies of the low-frequency radio sky. At the same time LOFAR also provides excellent short baseline coverage to map diffuse extended emission. However, producing high-quality deep images is challenging due to the presence of direction dependent calibration errors, caused by imperfect knowledge of the station beam shapes and the ionosphere. Furthermore, the large data volume and presence of station clock errors present additional difficulties. In this paper we present a new calibration scheme, which we name facet calibration, to obtain deep high-resolution LOFAR High Band Antenna images using the Dutch part of the array. This scheme solves and corrects the direction dependent errors in a number of facets that cover the observed field of view. Facet calibration provides close to thermal noise limited images for a typical 8 hr observing run at $\\sim$ 5arcsec resolu...

  1. Entropic calibration revisited

    Energy Technology Data Exchange (ETDEWEB)

    Brody, Dorje C. [Blackett Laboratory, Imperial College, London SW7 2BZ (United Kingdom)]. E-mail: d.brody@imperial.ac.uk; Buckley, Ian R.C. [Centre for Quantitative Finance, Imperial College, London SW7 2AZ (United Kingdom); Constantinou, Irene C. [Blackett Laboratory, Imperial College, London SW7 2BZ (United Kingdom); Meister, Bernhard K. [Blackett Laboratory, Imperial College, London SW7 2BZ (United Kingdom)

    2005-04-11

    The entropic calibration of the risk-neutral density function is effective in recovering the strike dependence of options, but encounters difficulties in determining the relevant greeks. By use of put-call reversal we apply the entropic method to the time reversed economy, which allows us to obtain the spot price dependence of options and the relevant greeks.

  2. Theoretical model atmosphere spectra used for the calibration of infrared instruments

    CERN Document Server

    Decin, L

    2007-01-01

    One of the key ingredients in establishing the relation between input signal and output flux from a spectrometer is accurate determination of the spectrophotometric calibration. In the case of spectrometers onboard satellites, the accuracy of this part of the calibration pedigree is ultimately linked to the accuracy of the set of reference SEDs that the spectrophotometric calibration is built on. In this paper, we deal with the spectrophotometric calibration of infrared (IR) spectrometers onboard satellites in the 2 to 200 micron range. We aim at comparing the different reference SEDs used for the IR spectrophotometric calibration. The emphasis is on the reference SEDs of stellar standards with spectral type later than A0, with special focus on the theoretical model atmosphere spectra. Using the MARCS model atmosphere code, spectral reference SEDs were constructed for a set of IR stellar standards (A dwarfs, solar analogs, G9-M0 giants). A detailed error analysis was performed to estimate proper uncertainties...

  3. Multi-Instrument Inter-Calibration (MIIC System

    Directory of Open Access Journals (Sweden)

    Chris Currey

    2016-11-01

    Full Text Available In order to have confidence in the long-term records of atmospheric and surface properties derived from satellite measurements it is important to know the stability and accuracy of the actual radiance or reflectance measurements. Climate quality measurements require accurate calibration of space-borne instruments. Inter-calibration is the process that ties the calibration of a target instrument to a more accurate, preferably SI-traceable, reference instrument by matching measurements in time, space, wavelength, and view angles. A major challenge for any inter-calibration study is to find and acquire matched samples from within the large data volumes distributed across Earth science data centers. Typically less than 0.1% of the instrument data are required for inter-calibration analysis. Software tools and networking middleware are necessary for intelligent selection and retrieval of matched samples from multiple instruments on separate spacecraft.  This paper discusses the Multi-Instrument Inter-Calibration (MIIC system, a web-based software framework used by the Climate Absolute Radiance and Refractivity Observatory (CLARREO Pathfinder mission to simplify the data management mechanics of inter-calibration. MIIC provides three main services: (1 inter-calibration event prediction; (2 data acquisition; and (3 data analysis. The combination of event prediction and powerful server-side functions reduces the data volume required for inter-calibration studies by several orders of magnitude, dramatically reducing network bandwidth and disk storage needs. MIIC provides generic retrospective analysis services capable of sifting through large data volumes of existing instrument data. The MIIC tiered design deployed at large institutional data centers can help international organizations, such as Global Space Based Inter-Calibration System (GSICS, more efficiently acquire matched data from multiple data centers. In this paper we describe the MIIC

  4. Two laboratory methods for the calibration of GPS speed meters

    Science.gov (United States)

    Bai, Yin; Sun, Qiao; Du, Lei; Yu, Mei; Bai, Jie

    2015-01-01

    The set-ups of two calibration systems are presented to investigate calibration methods of GPS speed meters. The GPS speed meter calibrated is a special type of high accuracy speed meter for vehicles which uses Doppler demodulation of GPS signals to calculate the measured speed of a moving target. Three experiments are performed: including simulated calibration, field-test signal replay calibration, and in-field test comparison with an optical speed meter. The experiments are conducted at specific speeds in the range of 40-180 km h-1 with the same GPS speed meter as the device under calibration. The evaluation of measurement results validates both methods for calibrating GPS speed meters. The relative deviations between the measurement results of the GPS-based high accuracy speed meter and those of the optical speed meter are analyzed, and the equivalent uncertainty of the comparison is evaluated. The comparison results justify the utilization of GPS speed meters as reference equipment if no fewer than seven satellites are available. This study contributes to the widespread use of GPS-based high accuracy speed meters as legal reference equipment in traffic speed metrology.

  5. Mercury CEM Calibration

    Energy Technology Data Exchange (ETDEWEB)

    John F. Schabron; Joseph F. Rovani; Susan S. Sorini

    2007-03-31

    The Clean Air Mercury Rule (CAMR) which was published in the Federal Register on May 18, 2005, requires that calibration of mercury continuous emissions monitors (CEMs) be performed with NIST-traceable standards. Western Research Institute (WRI) is working closely with the Electric Power Research Institute (EPRI), the National Institute of Standards and Technology (NIST), and the Environmental Protection Agency (EPA) to facilitate the development of the experimental criteria for a NIST traceability protocol for dynamic elemental mercury vapor generators. The traceability protocol will be written by EPA. Traceability will be based on the actual analysis of the output of each calibration unit at several concentration levels ranging from about 2-40 ug/m{sup 3}, and this analysis will be directly traceable to analyses by NIST using isotope dilution inductively coupled plasma/mass spectrometry (ID ICP/MS) through a chain of analyses linking the calibration unit in the power plant to the NIST ID ICP/MS. Prior to this project, NIST did not provide a recommended mercury vapor pressure equation or list mercury vapor pressure in its vapor pressure database. The NIST Physical and Chemical Properties Division in Boulder, Colorado was subcontracted under this project to study the issue in detail and to recommend a mercury vapor pressure equation that the vendors of mercury vapor pressure calibration units can use to calculate the elemental mercury vapor concentration in an equilibrium chamber at a particular temperature. As part of this study, a preliminary evaluation of calibration units from five vendors was made. The work was performed by NIST in Gaithersburg, MD and Joe Rovani from WRI who traveled to NIST as a Visiting Scientist.

  6. Field calibration of cup anemometers

    DEFF Research Database (Denmark)

    Schmidt Paulsen, Uwe; Mortensen, Niels Gylling; Hansen, Jens Carsten

    2007-01-01

    A field calibration method and results are described along with the experience gained with the method. The cup anemometers to be calibrated are mounted in a row on a 10-m high rig and calibrated in the free wind against a reference cup anemometer. The method has been reported [1] to improve...... the statistical bias on the data relative to calibrations carried out in a wind tunnel. The methodology is sufficiently accurate for calibration of cup anemometers used for wind resource assessments and provides a simple, reliable and cost-effective solution to cup anemometer calibration, especially suited...

  7. NOAA Climate Data Record (CDR) of Intersatellite Calibrated Clear-Sky HIRS Channel 12 Brightness Temperature, Version 2.6

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This NOAA Climate Data Record (CDR) of Inter-Satellite Calibrated Clear-Sky High Resolution Infrared Radiation Sounder (HIRS) Channel 12 brightness temperatures...

  8. Mercury Calibration System

    Energy Technology Data Exchange (ETDEWEB)

    John Schabron; Eric Kalberer; Joseph Rovani; Mark Sanderson; Ryan Boysen; William Schuster

    2009-03-11

    U.S. Environmental Protection Agency (EPA) Performance Specification 12 in the Clean Air Mercury Rule (CAMR) states that a mercury CEM must be calibrated with National Institute for Standards and Technology (NIST)-traceable standards. In early 2009, a NIST traceable standard for elemental mercury CEM calibration still does not exist. Despite the vacature of CAMR by a Federal appeals court in early 2008, a NIST traceable standard is still needed for whatever regulation is implemented in the future. Thermo Fisher is a major vendor providing complete integrated mercury continuous emissions monitoring (CEM) systems to the industry. WRI is participating with EPA, EPRI, NIST, and Thermo Fisher towards the development of the criteria that will be used in the traceability protocols to be issued by EPA. An initial draft of an elemental mercury calibration traceability protocol was distributed for comment to the participating research groups and vendors on a limited basis in early May 2007. In August 2007, EPA issued an interim traceability protocol for elemental mercury calibrators. Various working drafts of the new interim traceability protocols were distributed in late 2008 and early 2009 to participants in the Mercury Standards Working Committee project. The protocols include sections on qualification and certification. The qualification section describes in general terms tests that must be conducted by the calibrator vendors to demonstrate that their calibration equipment meets the minimum requirements to be established by EPA for use in CAMR monitoring. Variables to be examined include linearity, ambient temperature, back pressure, ambient pressure, line voltage, and effects of shipping. None of the procedures were described in detail in the draft interim documents; however they describe what EPA would like to eventually develop. WRI is providing the data and results to EPA for use in developing revised experimental procedures and realistic acceptance criteria based on

  9. The luminosity calibration of the uvby-$\\beta$ photometry

    CERN Document Server

    Jordi, C; Masana, E; Torra, J; Figueras, F; Domingo, A; Gómez, A E; Mennessier, M O

    2000-01-01

    The ESA HIPPARCOS satellite has provided astrometry of unprecedented accuracy, allowing to reassess, improve and refine the pre-HIPPARCOS luminosity calibrations. We review the "classical" absolute magnitude calibrations with the Stroemgren-Crawford intermediate-band photometric system. A small zero point correction of about 2-4% seems necessary, as well as to refine the dependences on metallicity and projected rotational velocity. The need of a rigorous statistical treatment of the extremely precise HIPPARCOS to derive definite dependences of the luminosity on physical stellar parameters is emphasized.

  10. Calibration of the Ørsted vector magnetometer

    DEFF Research Database (Denmark)

    Olsen, Nils; Tøffner-Clausen, Lars; Sabaka, T.J.

    2003-01-01

    The vector fluxgate magnetometer of the Orsted satellite is routinely calibrated by comparing its output with measurements of the absolute magnetic intensity from the Overhauser instrument, which is the second magnetometer of the satellite. We describe the method used for and the result obtained ...... coordinate system and the reference system of the star imager. This is done by comparing the magnetic and attitude measurements with a model of Earth's magnetic field. The Euler angles describing this rotation are determined in this way with an accuracy of better than 4 arcsec....

  11. Satellite data compression

    CERN Document Server

    Huang, Bormin

    2011-01-01

    Satellite Data Compression covers recent progress in compression techniques for multispectral, hyperspectral and ultra spectral data. A survey of recent advances in the fields of satellite communications, remote sensing and geographical information systems is included. Satellite Data Compression, contributed by leaders in this field, is the first book available on satellite data compression. It covers onboard compression methodology and hardware developments in several space agencies. Case studies are presented on recent advances in satellite data compression techniques via various prediction-

  12. Trends in communications satellites

    CERN Document Server

    Curtin, Denis J

    1979-01-01

    Trends in Communications Satellites offers a comprehensive look at trends and advances in satellite communications, including experimental ones such as NASA satellites and those jointly developed by France and Germany. The economic aspects of communications satellites are also examined. This book consists of 16 chapters and begins with a discussion on the fundamentals of electrical communications and their application to space communications, including spacecraft, earth stations, and orbit and wavelength utilization. The next section demonstrates how successful commercial satellite communicati

  13. The Calibration Reference Data System

    Science.gov (United States)

    Greenfield, P.; Miller, T.

    2016-07-01

    We describe a software architecture and implementation for using rules to determine which calibration files are appropriate for calibrating a given observation. This new system, the Calibration Reference Data System (CRDS), replaces what had been previously used for the Hubble Space Telescope (HST) calibration pipelines, the Calibration Database System (CDBS). CRDS will be used for the James Webb Space Telescope (JWST) calibration pipelines, and is currently being used for HST calibration pipelines. CRDS can be easily generalized for use in similar applications that need a rules-based system for selecting the appropriate item for a given dataset; we give some examples of such generalizations that will likely be used for JWST. The core functionality of the Calibration Reference Data System is available under an Open Source license. CRDS is briefly contrasted with a sampling of other similar systems used at other observatories.

  14. An Investigation of a Novel Cross-Calibration Method of FY-3C/VIRR against NPP/VIIRS in the Dunhuang Test Site

    Directory of Open Access Journals (Sweden)

    Caixia Gao

    2016-01-01

    Full Text Available Radiometric cross-calibration of Earth observation sensors is an effective approach to evaluate instrument calibration performance, identify and diagnose calibration anomalies, and quantify the consistency of measurements from different sensors. In this study a novel cross-calibration method is proposed, taking into account the spectral and viewing angle differences adequately; the method is applied to the FY-3C/Visible Infrared Radiometer (VIRR, taking the Suomi National Polar-Orbiting Partnership (NPP/Visible Infrared Imaging Radiometer Suite (VIIRS as a reference. The results show that the relative difference between the two sets increases from January to May 2014, and becomes lower for the data on 24 July, 11 September, and 16 September, within approximately 10%. This phenomenon is caused by the updating of the calibration coefficients in the VIRR datasets with results from a vicarious method on June 2014. After performing an approximate estimation of the uncertainty, it is demonstrated that this calibration has a total uncertainty of 5.5%–6.0%, which is mainly from the uncertainty of the Bidirectional Reflectance Distribution Function model.

  15. Evolution and biogeography of the slipper orchids: Eocene vicariance of the conduplicate genera in the Old and New World Tropics.

    Directory of Open Access Journals (Sweden)

    Yan-Yan Guo

    Full Text Available Intercontinental disjunctions between tropical regions, which harbor two-thirds of the flowering plants, have drawn great interest from biologists and biogeographers. Most previous studies on these distribution patterns focused on woody plants, and paid little attention to herbs. The Orchidaceae is one of the largest families of angiosperms, with a herbaceous habit and a high species diversity in the Tropics. Here we investigate the evolutionary and biogeographical history of the slipper orchids, which represents a monophyletic subfamily (Cypripedioideae of the orchid family and comprises five genera that are disjunctly distributed in tropical to temperate regions. A relatively well-resolved and highly supported phylogeny of slipper orchids was reconstructed based on sequence analyses of six maternally inherited chloroplast and two low-copy nuclear genes (LFY and ACO. We found that the genus Cypripedium with a wide distribution in the northern temperate and subtropical zones diverged first, followed by Selenipedium endemic to South America, and finally conduplicate-leaved genera in the Tropics. Mexipedium and Phragmipedium from the neotropics are most closely related, and form a clade sister to Paphiopedilum from tropical Asia. According to molecular clock estimates, the genus Selenipedium originated in Palaeocene, while the most recent common ancestor of conduplicate-leaved slipper orchids could be dated back to the Eocene. Ancestral area reconstruction indicates that vicariance is responsible for the disjunct distribution of conduplicate slipper orchids in palaeotropical and neotropical regions. Our study sheds some light on mechanisms underlying generic and species diversification in the orchid family and tropical disjunctions of herbaceous plant groups. In addition, we suggest that the biogeographical study should sample both regional endemics and their widespread relatives.

  16. Lidar calibration experiments

    DEFF Research Database (Denmark)

    Ejsing Jørgensen, Hans; Mikkelsen, T.; Streicher, J.

    1997-01-01

    A series of atmospheric aerosol diffusion experiments combined with lidar detection was conducted to evaluate and calibrate an existing retrieval algorithm for aerosol backscatter lidar systems. The calibration experiments made use of two (almost) identical mini-lidar systems for aerosol cloud...... detection to test the reproducibility and uncertainty of lidars. Lidar data were obtained from both single-ended and double-ended Lidar configurations. A backstop was introduced in one of the experiments and a new method was developed where information obtained from the backstop can be used in the inversion...... algorithm. Independent in-situ aerosol plume concentrations were obtained from a simultaneous tracer gas experiment with SF6, and comparisons with the two lidars were made. The study shows that the reproducibility of the lidars is within 15%, including measurements from both sides of a plume...

  17. HIRDLS monochromator calibration equipment

    Science.gov (United States)

    Hepplewhite, Christopher L.; Barnett, John J.; Djotni, Karim; Whitney, John G.; Bracken, Justain N.; Wolfenden, Roger; Row, Frederick; Palmer, Christopher W. P.; Watkins, Robert E. J.; Knight, Rodney J.; Gray, Peter F.; Hammond, Geoffory

    2003-11-01

    A specially designed and built monochromator was developed for the spectral calibration of the HIRDLS instrument. The High Resolution Dynamics Limb Sounder (HIRDLS) is a precision infra-red remote sensing instrument with very tight requirements on the knowledge of the response to received radiation. A high performance, vacuum compatible monochromator, was developed with a wavelength range from 4 to 20 microns to encompass that of the HIRDLS instrument. The monochromator is integrated into a collimating system which is shared with a set of tiny broad band sources used for independent spatial response measurements (reported elsewhere). This paper describes the design and implementation of the monochromator and the performance obtained during the period of calibration of the HIRDLS instrument at Oxford University in 2002.

  18. Optical tweezers absolute calibration

    CERN Document Server

    Dutra, R S; Neto, P A Maia; Nussenzveig, H M

    2014-01-01

    Optical tweezers are highly versatile laser traps for neutral microparticles, with fundamental applications in physics and in single molecule cell biology. Force measurements are performed by converting the stiffness response to displacement of trapped transparent microspheres, employed as force transducers. Usually, calibration is indirect, by comparison with fluid drag forces. This can lead to discrepancies by sizable factors. Progress achieved in a program aiming at absolute calibration, conducted over the past fifteen years, is briefly reviewed. Here we overcome its last major obstacle, a theoretical overestimation of the peak stiffness, within the most employed range for applications, and we perform experimental validation. The discrepancy is traced to the effect of primary aberrations of the optical system, which are now included in the theory. All required experimental parameters are readily accessible. Astigmatism, the dominant effect, is measured by analyzing reflected images of the focused laser spo...

  19. Calibration Facilities for NIF

    Energy Technology Data Exchange (ETDEWEB)

    Perry, T.S.

    2000-06-15

    The calibration facilities will be dynamic and will change to meet the needs of experiments. Small sources, such as the Manson Source should be available to everyone at any time. Carrying out experiments at Omega is providing ample opportunity for practice in pre-shot preparation. Hopefully, the needs that are demonstrated in these experiments will assure the development of (or keep in service) facilities at each of the laboratories that will be essential for in-house preparation for experiments at NIF.

  20. Mesoscale hybrid calibration artifact

    Science.gov (United States)

    Tran, Hy D.; Claudet, Andre A.; Oliver, Andrew D.

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  1. Improving knowledge of the surface salinity annual cycle with Aquarius satellite measurements

    Science.gov (United States)

    Lagerloef, G. S. E.

    2016-12-01

    To improve knowledge of the ocean surface salinity annual cycle, and its link to global precipitation patterns, remains a key science measurement objective for satellites. The Aquarius satellite data are applied here to address this, and the analysis is not as straightforward as it may seem. Sensor calibration is considered carefully to ensure that seasonality in external calibration data sources do not alias the satellite measurements. For example, quasi-monthly calibration error signals were identified early in the Aquarius mission. Subsequently, Aquarius data processing has relied primarily on an ocean target calibration method, whereby the satellite observations were co-located with output from the US Navy operational HYCOM model to adjust for these quasi-monthly calibration drifts. It was later determined that HYCOM salinity fields are themselves adjusted with a climatological restoring term, that imprints the seasonal climatology signal on the sensor calibration. When that output is compared with a parallel Aquarius data processing that bypasses the HYCOM ocean target calibration, and substitutes a simulation of the sensor electronics, the globally averaged output show very different annual signals between these trials. A modified ocean-target calibration, that employs satellite data matched directly with the in situ observations, is presently being investigated. The methodology uses signal processing to separate the satellite-in situ differences related to the sensor calibration from geophysical error sources. This remains a work-in-progress, and the results, with any unresolved issues, will be discussed. The presentation will also provide a very brief summary of Aquarius scientific accomplishments, the final "legacy" data set production, and the program to continue salinity data processing from other satellites.

  2. Calibration of Underwater Sound Transducers

    Directory of Open Access Journals (Sweden)

    H.R.S. Sastry

    1983-07-01

    Full Text Available The techniques of calibration of underwater sound transducers for farfield, near-field and closed environment conditions are reviewed in this paper .The design of acoustic calibration tank is mentioned. The facilities available at Naval Physical & Oceanographic Laboratory, Cochin for calibration of transducers are also listed.

  3. Satellite Ocean Biology: Past, Present, Future

    Science.gov (United States)

    McClain, Charles R.

    2012-01-01

    Since 1978 when the first satellite ocean color proof-of-concept sensor, the Nimbus-7 Coastal Zone Color Scanner, was launched, much progress has been made in refining the basic measurement concept and expanding the research applications of global satellite time series of biological and optical properties such as chlorophyll-a concentrations. The seminar will review the fundamentals of satellite ocean color measurements (sensor design considerations, on-orbit calibration, atmospheric corrections, and bio-optical algorithms), scientific results from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and Moderate resolution Imaging Spectroradiometer (MODIS) missions, and the goals of future NASA missions such as PACE, the Aerosol, Cloud, Ecology (ACE), and Geostationary Coastal and Air Pollution Events (GeoCAPE) missions.

  4. Internet-based calibration of a multifunction calibrator

    Energy Technology Data Exchange (ETDEWEB)

    BUNTING BACA,LISA A.; DUDA JR.,LEONARD E.; WALKER,RUSSELL M.; OLDHAM,NILE; PARKER,MARK

    2000-04-17

    A new way of providing calibration services is evolving which employs the Internet to expand present capabilities and make the calibration process more interactive. Sandia National Laboratories and the National Institute of Standards and Technology are collaborating to set up and demonstrate a remote calibration of multifunction calibrators using this Internet-based technique that is becoming known as e-calibration. This paper describes the measurement philosophy and the Internet resources that can provide real-time audio/video/data exchange, consultation and training, as well as web-accessible test procedures, software and calibration reports. The communication system utilizes commercial hardware and software that should be easy to integrate into most calibration laboratories.

  5. Operational Land Imager relative radiometric calibration

    Science.gov (United States)

    Barsi, Julia A.; Markham, Brian L.

    2015-09-01

    The Operational Land Imager (OLI), on board the Landsat-8 satellite, is a pushbroom sensor with nearly 7000 detectors per band, divided between 14 separate modules. While rigorously characterized prior to launch, the shear number of individual detectors presents a challenge to maintaining the on-orbit relative calibration, such that stripes, bands and other artifacts are minimized in the final image products. On-orbit relative calibration of the OLI is primarily monitored and corrected by observing an on-board primary solar diffuser panel. The panel is the most uniform target available to the OLI, though as observed but the OLI, it has a slope across the field of view due to view angle effects. Just after launch, parameters were derived using the solar diffuser data, to correct for the angular effects across the 14 modules. The residual discontinuities between arrays and the detector-to-detector uniformity continue to be monitored on a weekly basis. The observed variations in the responses to the diffuser panel since launch are thought to be due to real instrument changes. Since launch, the Coastal/Aerosol (CA) and Blue bands have shown the most variation in relative calibration of the VNIR bands, with as much as 0.14% change (3-sigma) between consecutive relative gain estimates. The other VNIR bands (Green, Red and NIR) initially had detectors showing a slow drift of about 0.2% per year, though this stopped after an instrument power cycle about seven months after launch. The SWIR bands also exhibit variability between collects (0.11% 3-sigma) but the larger changes have been where individual detectors' responses change suddenly by as much as 1.5%. The mechanisms behind these changes are not well understood but in order to minimize impact to the users, the OLI relative calibration is updated on a quarterly basis in order to capture changes over time.

  6. Mercury CEM Calibration

    Energy Technology Data Exchange (ETDEWEB)

    John Schabron; Joseph Rovani; Mark Sanderson

    2008-02-29

    Mercury continuous emissions monitoring systems (CEMS) are being implemented in over 800 coal-fired power plant stacks. The power industry desires to conduct at least a full year of monitoring before the formal monitoring and reporting requirement begins on January 1, 2009. It is important for the industry to have available reliable, turnkey equipment from CEM vendors. Western Research Institute (WRI) is working closely with the Electric Power Research Institute (EPRI), the National Institute of Standards and Technology (NIST), and the Environmental Protection Agency (EPA) to facilitate the development of the experimental criteria for a NIST traceability protocol for dynamic elemental mercury vapor generators. The generators are used to calibrate mercury CEMs at power plant sites. The Clean Air Mercury Rule (CAMR) which was published in the Federal Register on May 18, 2005 requires that calibration be performed with NIST-traceable standards (Federal Register 2007). Traceability procedures will be defined by EPA. An initial draft traceability protocol was issued by EPA in May 2007 for comment. In August 2007, EPA issued an interim traceability protocol for elemental mercury generators (EPA 2007). The protocol is based on the actual analysis of the output of each calibration unit at several concentration levels ranging initially from about 2-40 {micro}g/m{sup 3} elemental mercury, and in the future down to 0.2 {micro}g/m{sup 3}, and this analysis will be directly traceable to analyses by NIST. The document is divided into two separate sections. The first deals with the qualification of generators by the vendors for use in mercury CEM calibration. The second describes the procedure that the vendors must use to certify the generator models that meet the qualification specifications. The NIST traceable certification is performance based, traceable to analysis using isotope dilution inductively coupled plasma/mass spectrometry performed by NIST in Gaithersburg, MD. The

  7. Xichang Satellite Launch Center

    Institute of Scientific and Technical Information of China (English)

    LiuJie

    2004-01-01

    Xichang Satellite Launch Center(XSLC) is mainly for geosynchronous orbit launches. The main purpose of XSLC is to launch spacecraft, such as broadcasting,communications and meteorological satellites, into geo-stationary orbit.Most of the commercial satellite launches of Long March vehicles have been from Xichang Satellite Launch Center. With 20 years' development,XSLC can launch 5 kinds of launch vehicles and send satellites into geostationary orbit and polar orbit. In the future, moon exploration satellites will also be launched from XSLC.

  8. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2017-01-01

    The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

  9. Calibration of the Herschel SPIRE Fourier Transform Spectrometer

    CERN Document Server

    Swinyard, B M; Hopwood, R; Valtchanov, I; Lu, N; Fulton, T; Benielli, D; Imhof, P; Marchili, N; Baluteau, J -P; Bendo, G J; Ferlet, M; Griffin, M J; Lim, T L; Makiwa, G; Naylor, D A; Orton, G S; Papageorgiou, A; Pearson, C P; Schulz, B; Sidher, S D; Spencer, L D; van der Wiel, M H D; Wu, R

    2014-01-01

    The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standard astronomical sources. The calibration scheme assumes a spatially extended source and uses the Herschel telescope as primary calibrator. Conversion from extended to point-source calibration is carried out using observations of the planet Uranus. The model of the telescope emission is shown to be accurate to within 6% and repeatable to better than 0.06% and, by comparison with models of Mars and Neptune, the Uranus model is shown to be accurate to within 3%. Multiple observations of a number of point-like sources show that the repeatability of the calibration is better than 1%, if the effects of the satellite absolu...

  10. External calibration technique of millimeter-wave cloud radar

    Science.gov (United States)

    Wen, Tao; Zhao, Zeng-Liang; Yao, Zhi-Gang; Han, Zhi-Gang; Guo, Lin-Da

    2016-10-01

    The millimeter-wave cloud radar can provide a large number of fine and reliable information for the inversion of cloud macro and micro parameters. A key link of using the millimeter-wave cloud radar to detect the cloud is that the radar must be calibrated. Due to the precision components and severe environment of millimeter-wave cloud radar, subtle changes may take place in the operation process of cloud radar, unless the cloud radar is calibrated regularly. Although the calibration system inside the cloud radar can track and monitor the main working parameters and correct the detection results, it fails to consider the characteristics of the antenna and the mutual influence among different components of cloud radar. Therefore, the external calibration for cloud radar system is very important. Combined with the actual situation of cloud radar under domestic onboard platform, this paper builds a complete external calibration technique process of cloud radar based on the calm sea, providing the theoretical support for the external calibration experiments of the airborne and even satellite-borne millimeter-wave cloud radar developed by our country.

  11. Self-Calibrating Pressure Transducer

    Science.gov (United States)

    Lueck, Dale E. (Inventor)

    2006-01-01

    A self-calibrating pressure transducer is disclosed. The device uses an embedded zirconia membrane which pumps a determined quantity of oxygen into the device. The associated pressure can be determined, and thus, the transducer pressure readings can be calibrated. The zirconia membrane obtains oxygen .from the surrounding environment when possible. Otherwise, an oxygen reservoir or other source is utilized. In another embodiment, a reversible fuel cell assembly is used to pump oxygen and hydrogen into the system. Since a known amount of gas is pumped across the cell, the pressure produced can be determined, and thus, the device can be calibrated. An isolation valve system is used to allow the device to be calibrated in situ. Calibration is optionally automated so that calibration can be continuously monitored. The device is preferably a fully integrated MEMS device. Since the device can be calibrated without removing it from the process, reductions in costs and down time are realized.

  12. Planck 2015 results: VIII. High Frequency Instrument data processing: Calibration and maps

    DEFF Research Database (Denmark)

    Adam, R.; Ade, P. A R; Aghanim, N.

    2016-01-01

    This paper describes the processing applied to the cleaned, time-ordered information obtained from the Planck High Frequency Instrument (HFI) with the aim of producing photometrically calibrated maps in temperature and (for the first time) in polarization. The data from the entire 2.5-year HFI...... mission include almost five full-sky surveys. HFI observes the sky over a broad range of frequencies, from 100 to 857 GHz. To obtain the best accuracy on the calibration over such a large range, two different photometric calibration schemes have been used. The 545 and 857 GHz data are calibrated using...... models of planetary atmospheric emission. The lower frequencies (from 100 to 353 GHz) are calibrated using the time-variable cosmological microwave background dipole, which we call the orbital dipole. This source of calibration only depends on the satellite velocity with respect to the solar system...

  13. Calibrating Data from the Hinode/X-Ray Telescope and Associated Uncertainties

    CERN Document Server

    Kobelski, Adam R; Weber, Mark A; McKenzie, David E; Reeves, Katharine K

    2013-01-01

    The X-Ray Telescope (XRT) onboard the Hinode satellite, launched 23 September 2006 by the Japanese Aerospace Exploration Agency (JAXA) is a joint mission between Japan, the United States, and the United Kingdom to study the solar corona. In particular XRT was designed to study solar plasmas with temperatures between 1 and 10 MK with $\\approx1''$ pixels ($\\approx2''$ resolution). Prior to analysis, the data product from this instrument must be properly calibrated and data values quantified in order to assess accurately the information contained within. We present here the standard methods of calibration for these data. The calibration is performed on an empirical basis which uses the least complicated correction that accurately describes the data while suppressing spurious features. By analyzing the uncertainties remaining in the data after calibration, we conclude that the procedure is successful, as the remaining uncertainty after calibration is dominated by photon noise. This calibration software is availab...

  14. Micro-Satellite Attitude Determination Using GPS Carrier Phases

    Institute of Scientific and Technical Information of China (English)

    He Xiu-feng; Ling Keck-voon

    2003-01-01

    GPS is an attractive attitude sensor for micro-satellites due to small package and advantage for cost savings. However, the major difficulty in attitude determination for a micro-satellite is that baseline lengths are short (less than a meter) . Thus , to obtain precise accuracy of attitudes for a micro-satellite, the algorithm selection and error source calibration are important. In this paper, a technique based on the attitude cost function is proposed. To verify the method proposed, the experiments have been conducted. The results indicate that attitude errors are less than 1 deg.

  15. CALIBRATED HYDRODYNAMIC MODEL

    Directory of Open Access Journals (Sweden)

    Sezar Gülbaz

    2015-01-01

    Full Text Available The land development and increase in urbanization in a watershed affect water quantityand water quality. On one hand, urbanization provokes the adjustment of geomorphicstructure of the streams, ultimately raises peak flow rate which causes flood; on theother hand, it diminishes water quality which results in an increase in Total SuspendedSolid (TSS. Consequently, sediment accumulation in downstream of urban areas isobserved which is not preferred for longer life of dams. In order to overcome thesediment accumulation problem in dams, the amount of TSS in streams and inwatersheds should be taken under control. Low Impact Development (LID is a BestManagement Practice (BMP which may be used for this purpose. It is a land planningand engineering design method which is applied in managing storm water runoff inorder to reduce flooding as well as simultaneously improve water quality. LID includestechniques to predict suspended solid loads in surface runoff generated over imperviousurban surfaces. In this study, the impact of LID-BMPs on surface runoff and TSS isinvestigated by employing a calibrated hydrodynamic model for Sazlidere Watershedwhich is located in Istanbul, Turkey. For this purpose, a calibrated hydrodynamicmodel was developed by using Environmental Protection Agency Storm WaterManagement Model (EPA SWMM. For model calibration and validation, we set up arain gauge and a flow meter into the field and obtain rainfall and flow rate data. Andthen, we select several LID types such as retention basins, vegetative swales andpermeable pavement and we obtain their influence on peak flow rate and pollutantbuildup and washoff for TSS. Consequently, we observe the possible effects ofLID on surface runoff and TSS in Sazlidere Watershed.

  16. Galileo satellite antenna modeling

    Science.gov (United States)

    Steigenberger, Peter; Dach, Rolf; Prange, Lars; Montenbruck, Oliver

    2015-04-01

    The space segment of the European satellite navigation system Galileo currently consists of six satellites. Four of them belong to the first generation of In-Orbit Validation (IOV) satellites whereas the other two are Full Operational Capability (FOC) satellites. High-precision geodetic applications require detailed knowledge about the actual phase center of the satellite and receiver antenna. The deviation of this actual phase center from a well-defined reference point is described by phase center offsets (PCOs) and phase center variations (PCVs). Unfortunately, no public information is available about the Galileo satellite antenna PCOs and PCVs, neither for the IOV, nor the FOC satellites. Therefore, conventional values for the IOV satellite antenna PCOs have been adopted for the Multi-GNSS experiment (MGEX) of the International GNSS Service (IGS). The effect of the PCVs is currently neglected and no PCOs for the FOC satellites are available yet. To overcome this deficiency in GNSS observation modeling, satellite antenna PCOs and PCVs are estimated for the Galileo IOV satellites based on global GNSS tracking data of the MGEX network and additional stations of the legacy IGS network. Two completely independent solutions are computed with the Bernese and Napeos software packages. The PCO and PCV values of the individual satellites are analyzed and the availability of two different solutions allows for an accuracy assessment. The FOC satellites are built by a different manufacturer and are also equipped with another type of antenna panel compared to the IOV satellites. Signal transmission of the first FOC satellite has started in December 2014 and activation of the second satellite is expected for early 2015. Based on the available observations PCO estimates and, optionally PCVs of the FOC satellites will be presented as well. Finally, the impact of the new antenna model on the precision and accuracy of the Galileo orbit determination is analyzed.

  17. Dynamic Torque Calibration Unit

    Science.gov (United States)

    Agronin, Michael L.; Marchetto, Carl A.

    1989-01-01

    Proposed dynamic torque calibration unit (DTCU) measures torque in rotary actuator components such as motors, bearings, gear trains, and flex couplings. Unique because designed specifically for testing components under low rates. Measures torque in device under test during controlled steady rotation or oscillation. Rotor oriented vertically, supported by upper angular-contact bearing and lower radial-contact bearing that floats axially to prevent thermal expansion from loading bearings. High-load capacity air bearing available to replace ball bearings when higher load capacity or reduction in rate noise required.

  18. ALTEA: The instrument calibration

    Energy Technology Data Exchange (ETDEWEB)

    Zaconte, V. [INFN and University of Rome Tor Vergata, Department of Physics, Via della Ricerca Scientifica 1, 00133 Rome (Italy)], E-mail: livio.narici@roma2.infn.it; Belli, F.; Bidoli, V.; Casolino, M.; Di Fino, L.; Narici, L.; Picozza, P.; Rinaldi, A. [INFN and University of Rome Tor Vergata, Department of Physics, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Sannita, W.G. [DISM, University of Genova, Genova (Italy); Department of Psychiatry, SUNY, Stoony Brook, NY (United States); Finetti, N.; Nurzia, G.; Rantucci, E.; Scrimaglio, R.; Segreto, E. [Department of Physics, University and INFN, L' Aquila (Italy); Schardt, D. [GSI/Biophysik, Darmstadt (Germany)

    2008-05-15

    The ALTEA program is an international and multi-disciplinary project aimed at studying particle radiation in space environment and its effects on astronauts' brain functions, as the anomalous perception of light flashes first reported during Apollo missions. The ALTEA space facility includes a 6-silicon telescopes particle detector, and is onboard the International Space Station (ISS) since July 2006. In this paper, the detector calibration at the heavy-ion synchrotron SIS18 at GSI Darmstadt will be presented and compared to the Geant 3 Monte Carlo simulation. Finally, the results of a neural network analysis that was used for ion discrimination on fragmentation data will also be presented.

  19. Effects of Landsat 5 Thematic Mapper and Landsat 7 Enhanced Thematic Mapper plus radiometric and geometric calibrations and corrections on landscape characterization

    Science.gov (United States)

    Vogelmann, James E.; Helder, Dennis; Morfitt, Ron; Choate, Michael J.; Merchant, James W.; Bulley, Henry

    2001-01-01

    The Thematic Mapper (TM) instruments onboard Landsats 4 and 5 provide high-quality imagery appropriate for many different applications, including land cover mapping, landscape ecology, and change detection. Precise calibration was considered to be critical to the success of the Landsat 7 mission and, thus, issues of calibration were given high priority during the development of the Enhanced Thematic Mapper Plus (ETM+). Data sets from the Landsat 5 TM are not routinely corrected for a number of radiometric and geometric artifacts, including memory effect, gain/bias, and interfocal plane misalignment. In the current investigation, the effects of correcting vs. not correcting these factors were investigated for several applications. Gain/bias calibrations were found to have a greater impact on most applications than did memory effect calibrations. Correcting interfocal plane offsets was found to have a moderate effect on applications. On June 2, 1999, Landsats 5 and 7 data were acquired nearly simultaneously over a study site in the Niobrara, NE area. Field radiometer data acquired at that site were used to facilitate crosscalibrations of Landsats 5 and 7 data. Current findings and results from previous investigations indicate that the internal calibrator of Landsat 5 TM tracked instrument gain well until 1988. After this, the internal calibrator diverged from the data derived from vicarious calibrations. Results from this study also indicate very good agreement between prelaunch measurements and vicarious calibration data for all Landsat 7 reflective bands except Band 4. Values are within about 3.5% of each other, except for Band 4, which differs by 10%. Coefficient of variation (CV) values derived from selected targets in the imagery were also analyzed. The Niobrara Landsat 7 imagery was found to have lower CV values than Landsat 5 data, implying that lower levels of noise characterize Landsat 7 data than current Landsat 5 data. It was also found that following

  20. Satellite-Delivered Learning.

    Science.gov (United States)

    Arnall, Gail C.

    1987-01-01

    Discusses the application of satellite information delivery to training. Describes a new trend, horizontal programming. Also discusses vertical programming and in-house production of training materials. Lists vendors of satellite-based training. (CH)

  1. GPS Satellite Simulation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The GPS satellite simulation facility consists of a GPS satellite simulator controlled by either a Silicon Graphics Origin 2000 or PC depending upon unit under test...

  2. China's Recoverable Satellites

    Institute of Scientific and Technical Information of China (English)

    Tang Boehang

    2008-01-01

    @@ By the end of 2006, China had launched 24 recoverable satellites (FSW) in total. Among them, 23 were launched successfully, of which all but one were successfully recovered. Recoverable satellites launched by China are listed in Table 1.

  3. Satellite Tags- Hawaii EEZ

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Satellite tagging was implemented in 2013. Satellite tagging is conducted using a Dan Inject air rifle and deployment arrows designed by Wildlife Computers. Two...

  4. 适用雇主责任的法律效果分析%The Legal Effect of Vicarious Liability

    Institute of Scientific and Technical Information of China (English)

    杜平欢

    2016-01-01

    雇主对受害人承担雇主责任,并不意味着雇员免责,否则受害人将承担雇主无资力的风险,对受害人保护不周。雇员与雇主承担连带责任,才能周延地保护受害人利益。确定二者内部责任分担时,应首先结合雇员对雇主指示、操作规范的违反情况分析雇员过错程度,确定雇主可否追偿,雇员轻过失视为雇主组织瑕疵的衍生物,由雇主全部承担。雇员有重过失或故意时,再依雇主过错程度,适用过失相抵规则,确定追偿份额。%Employer has to bear the vicarious liability for the victim,but it does not mean that employee need not undertake the liability for the victim, otherwise the victim will bear the risk of being uncompensated, which is unfair to victim. The employer and employee undertake joint liability, and then the interest of victim can be protected comprehensively. When determining the internal responsibility, we should consider employee’s violation of their employer’s instructions and of the code of practice so as to analyze the employee’s degree of fault and determine whether the employer has the right of recourse. The light negligence by the employee may only be a by-product of the organization. In that case, employees should be released from the liability of any compensation and the employer assumes all liability. When the employees are guilty of gross or deliberate negligence, the rule of contributory negligence is applied to determine the share of recourse according to the fault of the employer.

  5. A Simple Accelerometer Calibrator

    Science.gov (United States)

    Salam, R. A.; Islamy, M. R. F.; Munir, M. M.; Latief, H.; Irsyam, M.; Khairurrijal

    2016-08-01

    High possibility of earthquake could lead to the high number of victims caused by it. It also can cause other hazards such as tsunami, landslide, etc. In that case it requires a system that can examine the earthquake occurrence. Some possible system to detect earthquake is by creating a vibration sensor system using accelerometer. However, the output of the system is usually put in the form of acceleration data. Therefore, a calibrator system for accelerometer to sense the vibration is needed. In this study, a simple accelerometer calibrator has been developed using 12 V DC motor, optocoupler, Liquid Crystal Display (LCD) and AVR 328 microcontroller as controller system. The system uses the Pulse Wave Modulation (PWM) form microcontroller to control the motor rotational speed as response to vibration frequency. The frequency of vibration was read by optocoupler and then those data was used as feedback to the system. The results show that the systems could control the rotational speed and the vibration frequencies in accordance with the defined PWM.

  6. Satellite communication engineering

    CERN Document Server

    Kolawole, Michael Olorunfunmi

    2013-01-01

    An undeniably rich and thorough guide to satellite communication engineering, Satellite Communication Engineering, Second Edition presents the fundamentals of information communications systems in a simple and succinct way. This book considers both the engineering aspects of satellite systems as well as the practical issues in the broad field of information transmission. Implementing concepts developed on an intuitive, physical basis and utilizing a combination of applications and performance curves, this book starts off with a progressive foundation in satellite technology, and then moves on

  7. Two vicariant Semispathidium species from tropical Africa and central Europe: S. fraterculum nov. spec. and S. pulchrum nov. spec. (Ciliophora, Haptorida).

    Science.gov (United States)

    Foissner, Wilhelm; Hess, Sebastian; Al-Rasheid, Khaled

    2010-01-01

    Using standard methods, we describe two new Semispathidium species from semiterrestrial habitats of tropical Africa and central Europe. Semispathidium fraterculum nov. spec. and S. pulchrum nov. spec. differ from each other and from two Namibian (Southwest African) congeners by body size, the shape and location of the extrusomes; the shape of the macronucleus, the number of ciliary rows, the number of cilia within the rows, and the number of dikinetids comprising the dorsal brush rows. The globular resting cyst of S. fraterculum is unique in having countless granules on the inside of the external layer, forming sharp-angled rows. The distribution of these and two further, not yet described south African species indicates that the genus Semispathidium evolved in subtropical Africa. Semispathidium fraterculum and S. pulchrum are highly similar, both morphologically and ecologically, differing in mainly one important feature: the shape and location of the extrusomes used for prey capture. This suggests that they evolved from a common ancestor whose areal was divided by a vicariant event, causing an independent evolution of the split populations. We argue that this and other species pairs indicate that the vicariance speciation model is applicable to protists.

  8. Taiyuan Satellite Launch Center

    Institute of Scientific and Technical Information of China (English)

    LiuJie

    2004-01-01

    There are three major space launch bases in China, the Jiuquan Satellite Launch Center,the Taiyuan Satellite Launch Center and the Xichang Satellite Launch Center. All the three launch centers are located in sparsely populated areas where the terrain is even and the field of vision is broad. Security, transport conditions and the influence of the axial rotation

  9. Geodetic Secor Satellite

    Science.gov (United States)

    1974-06-01

    simple, and had low-power lem. 17 14. Satellite Orientation . The satellite was designed to maintain a constant relationship between the antenna...the same satellite orientation . Further considerations were Th oscillations, however, when higher orbital ranges (500-2500 nautical miles) -, 3 a

  10. TC-2 Satellite Delivered

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    On April 18, 2005, TC-2, the second satellite of Double Star Program (DSP), which was jointly developed by CNSA and ESA, was approved to be delivered to the user after the on-board test and trial operation. The satellite is working well and the performance can meet the user's need. The satellite has collected large amount of valuable scientific data

  11. Landsat-7 EMT+ On-Orbit Radiometric Calibration

    Science.gov (United States)

    Markham, Brian L.; Barker, J. L.; Kaita, E.; Seiferth, J.; Morfitt, Ron

    1999-01-01

    Landsat-7 was launched on April 15, 1999 and completed its on orbit initialization and verification period on June 28, 1999. The ETM+ payload is similar to the TM sensors on previous Landsat satellites and incorporates two new devices to improve its absolute radiometric calibration. The Full Aperture Solar Calibrator (FASC) is a deployable diffuser panel. This device has been deployed 9 times to date, with a normal deployment schedule of once per month. The initial analysis of the FASC data has given absolute calibration results within 5% of the prelaunch integrating sphere calibrations and a range of variation of 2% between dates. The Partial Aperture Solar Calibrator (PASC), is a set of auxiliary optics that allows the ETM+ to view the sun through a reduced aperture. Data have normally been acquired on a daily basis with the PASC. Initial results with the PASC were encouraging, despite some unexpected saturation in the shortest wavelength band. The response of the ETM+ short wavelength (silicon) bands to the PASC increased initially and has begun to decrease in some of these bands. The longer wavelength (InSb) bands have shown up to 30% oscillations that vary between detectors within the band. Studies are ongoing to better characterize the response to the PASC. The ETM+ also incorporates an internal calibrator (IC), a shutter that oscillates in front of the focal plane that directs light from the internal calibrator lamps to the focal plane. The responses to this device are also varying, though differently than the PASC results. Both the IC and PASC results are attributable to the calibration devices as opposed to the ETM+ itself.

  12. Expansion dating: calibrating molecular clocks in marine species from expansions onto the Sunda Shelf Following the Last Glacial Maximum.

    Science.gov (United States)

    Crandall, Eric D; Sbrocco, Elizabeth J; Deboer, Timery S; Barber, Paul H; Carpenter, Kent E

    2012-02-01

    The rate of change in DNA is an important parameter for understanding molecular evolution and hence for inferences drawn from studies of phylogeography and phylogenetics. Most rate calibrations for mitochondrial coding regions in marine species have been made from divergence dating for fossils and vicariant events older than 1-2 My and are typically 0.5-2% per lineage per million years. Recently, calibrations made with ancient DNA (aDNA) from younger dates have yielded faster rates, suggesting that estimates of the molecular rate of change depend on the time of calibration, decaying from the instantaneous mutation rate to the phylogenetic substitution rate. aDNA methods for recent calibrations are not available for most marine taxa so instead we use radiometric dates for sea-level rise onto the Sunda Shelf following the Last Glacial Maximum (starting ∼18,000 years ago), which led to massive population expansions for marine species. Instead of divergence dating, we use a two-epoch coalescent model of logistic population growth preceded by a constant population size to infer a time in mutational units for the beginning of these expansion events. This model compares favorably to simpler coalescent models of constant population size, and exponential or logistic growth, and is far more precise than estimates from the mismatch distribution. Mean rates estimated with this method for mitochondrial coding genes in three invertebrate species are elevated in comparison to older calibration points (2.3-6.6% per lineage per million years), lending additional support to the hypothesis of calibration time dependency for molecular rates.

  13. GEO-GEO Cross-Calibration Results for AE9 Development

    Science.gov (United States)

    2014-02-18

    1 - 1. INTRODUCTION This document summarizes cross calibration of energetic electron observations between pairs of LANL geosynchronous (GEO... document reviews cross calibration between various pairings of LANL GEO satellites. Data are available from seven Synchronous Orbit Particle Analyzer...specifications, or other data included in this document for any purpose other than Government procurement does not in any way obligate the U.S. Government

  14. Internal Water Vapor Photoacoustic Calibration

    Science.gov (United States)

    Pilgrim, Jeffrey S.

    2009-01-01

    Water vapor absorption is ubiquitous in the infrared wavelength range where photoacoustic trace gas detectors operate. This technique allows for discontinuous wavelength tuning by temperature-jumping a laser diode from one range to another within a time span suitable for photoacoustic calibration. The use of an internal calibration eliminates the need for external calibrated reference gases. Commercial applications include an improvement of photoacoustic spectrometers in all fields of use.

  15. RX130 Robot Calibration

    Science.gov (United States)

    Fugal, Mario

    2012-10-01

    In order to create precision magnets for an experiment at Oak Ridge National Laboratory, a new reverse engineering method has been proposed that uses the magnetic scalar potential to solve for the currents necessary to produce the desired field. To make the magnet it is proposed to use a copper coated G10 form, upon which a drill, mounted on a robotic arm, will carve wires. The accuracy required in the manufacturing of the wires exceeds nominal robot capabilities. However, due to the rigidity as well as the precision servo motor and harmonic gear drivers, there are robots capable of meeting this requirement with proper calibration. Improving the accuracy of an RX130 to be within 35 microns (the accuracy necessary of the wires) is the goal of this project. Using feedback from a displacement sensor, or camera and inverse kinematics it is possible to achieve this accuracy.

  16. SURF Model Calibration Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    SURF and SURFplus are high explosive reactive burn models for shock initiation and propagation of detonation waves. They are engineering models motivated by the ignition & growth concept of high spots and for SURFplus a second slow reaction for the energy release from carbon clustering. A key feature of the SURF model is that there is a partial decoupling between model parameters and detonation properties. This enables reduced sets of independent parameters to be calibrated sequentially for the initiation and propagation regimes. Here we focus on a methodology for tting the initiation parameters to Pop plot data based on 1-D simulations to compute a numerical Pop plot. In addition, the strategy for tting the remaining parameters for the propagation regime and failure diameter is discussed.

  17. Radiological Calibration and Standards Facility

    Data.gov (United States)

    Federal Laboratory Consortium — PNNL maintains a state-of-the-art Radiological Calibration and Standards Laboratory on the Hanford Site at Richland, Washington. Laboratory staff provide expertise...

  18. Field calibration of cup anemometers

    DEFF Research Database (Denmark)

    Kristensen, L.; Jensen, G.; Hansen, A.

    2001-01-01

    An outdoor calibration facility for cup anemometers, where the signals from 10 anemometers of which at least one is a reference can be can be recorded simultaneously, has been established. The results are discussed with special emphasis on the statisticalsignificance of the calibration expressions....... It is concluded that the method has the advantage that many anemometers can be calibrated accurately with a minimum of work and cost. The obvious disadvantage is that the calibration of a set of anemometersmay take more than one month in order to have wind speeds covering a sufficiently large magnitude range...

  19. Calibration of Nanopositioning Stages

    Directory of Open Access Journals (Sweden)

    Ning Tan

    2015-12-01

    Full Text Available Accuracy is one of the most important criteria for the performance evaluation of micro- and nanorobots or systems. Nanopositioning stages are used to achieve the high positioning resolution and accuracy for a wide and growing scope of applications. However, their positioning accuracy and repeatability are not well known and difficult to guarantee, which induces many drawbacks for many applications. For example, in the mechanical characterisation of biological samples, it is difficult to perform several cycles in a repeatable way so as not to induce negative influences on the study. It also prevents one from controlling accurately a tool with respect to a sample without adding additional sensors for closed loop control. This paper aims at quantifying the positioning repeatability and accuracy based on the ISO 9283:1998 standard, and analyzing factors influencing positioning accuracy onto a case study of 1-DoF (Degree-of-Freedom nanopositioning stage. The influence of thermal drift is notably quantified. Performances improvement of the nanopositioning stage are then investigated through robot calibration (i.e., open-loop approach. Two models (static and adaptive models are proposed to compensate for both geometric errors and thermal drift. Validation experiments are conducted over a long period (several days showing that the accuracy of the stage is improved from typical micrometer range to 400 nm using the static model and even down to 100 nm using the adaptive model. In addition, we extend the 1-DoF calibration to multi-DoF with a case study of a 2-DoF nanopositioning robot. Results demonstrate that the model efficiently improved the 2D accuracy from 1400 nm to 200 nm.

  20. Meteorological satellite systems

    CERN Document Server

    Tan, Su-Yin

    2014-01-01

    “Meteorological Satellite Systems” is a primer on weather satellites and their Earth applications. This book reviews historic developments and recent technological advancements in GEO and polar orbiting meteorological satellites. It explores the evolution of these remote sensing technologies and their capabilities to monitor short- and long-term changes in weather patterns in response to climate change. Satellites developed by various countries, such as U.S. meteorological satellites, EUMETSAT, and Russian, Chinese, Japanese and Indian satellite platforms are reviewed. This book also discusses international efforts to coordinate meteorological remote sensing data collection and sharing. This title provides a ready and quick reference for information about meteorological satellites. It serves as a useful tool for a broad audience that includes students, academics, private consultants, engineers, scientists, and teachers.

  1. Theory of geostationary satellites

    CERN Document Server

    Zee, Chong-Hung

    1989-01-01

    Geostationary or equatorial synchronous satellites are a daily reminder of our space efforts during the past two decades. The nightly television satellite weather picture, the intercontinental telecommunications of television transmissions and telephone conversations, and the establishrnent of educational programs in remote regions on Earth are constant reminders of the presence of these satellites. As used here, the term 'geo­ stationary' must be taken loosely because, in the long run, the satellites will not remain 'stationary' with respect to an Earth-fixed reference frame. This results from the fact that these satellites, as is true for all satellites, are incessantly subject to perturbations other than the central-body attraction of the Earth. Among the more predominant pertur­ bations are: the ellipticity of the Earth's equator, the Sun and Moon, and solar radiation pressure. Higher harmonics of the Earth's potential and tidal effects also influence satellite motion, but they are of second­ order whe...

  2. Sensor Calibration Inter-Comparison Methodologies and Applications TO AVHRR, MODIS, AND VIIRS Observations

    Science.gov (United States)

    Xiong, Xiaoxiong; Wu, Aisheng; Cao, Changyong; Doelling, David

    2012-01-01

    As more and more satellite observations become available to the science and user community, their on-orbit calibration accuracy and consistency over time continue to be an important and challenge issue, especially in the reflective solar spectral regions. In recent years, many sensor calibration inter-comparison methodologies have been developed by different groups and applied to a range of satellite observations, aiming to the improvement of satellite instrument calibration accuracy and data quality. This paper provides an overview of different methodologies developed for inter-comparisons of A VHRR and MODIS observations, and extends their applications to the Visible-Infrared Imaging Radiometer Suite (VIIRS) instrument. The first VIIRS was launched on-board the NPP spacecraft on October 28, 2011. The VIIRS, designed with MODIS heritage, collects data in 22 spectral bands from visible (VIS) to long-wave infrared (LWIR). Like both Terra and Aqua MODIS, the VIIRS on-orbit calibration is performed using a set of on-board calibrators (OBC), Methodologies discussed in this paper include the use of well-characterized ground reference targets, near simultaneous nadir overpasses (SNO), lunar observations, and deep convective clouds (DeC). Results from long-term A VHRR and MODIS observations and initial assessment of VIIRS on-orbit calibration are presented. Current uncertainties of different methodologies and potential improvements are also discussed in this paper.

  3. A Global Poverty Map Derived from Satellite Data

    Energy Technology Data Exchange (ETDEWEB)

    Elvidge, Christopher D. [NOAA National Geophysical Data Center,; Sutton, Paul S. [University of Denver; Ghosh, Tilottama [University of Denver; Tuttle, Benjamin T. [NOAA National Geophysical Data Center,; Baugh, Kimberly E. [NOAA National Geophysical Data Center,; Bhaduri, Budhendra L [ORNL; Bright, Eddie A [ORNL

    2009-01-01

    A global poverty map has been produced at 30 arc sec resolution using a poverty index calculated by dividing population count (LandScan2004) by the brightness of satellite observed lighting (DMSP nighttimelights). Inputs to the LandScan product include satellite-derived landcover and topography, plus human settlement outlines derived from high-resolution imagery. The poverty estimates have been calibrated using national level poverty data from the World Development Indicators (WDI) 2006 edition. The total estimate of the numbers of individuals living in poverty is 2.2billion, slightly under the WDI estimate of 2.6 billion. We have demonstrated a new class of poverty map that should improve over time through the inclusion of new reference data for calibration of poverty estimates and as improvements are made in the satellite observation of human activities related to economic activity and technology access.

  4. A global poverty map derived from satellite data

    Science.gov (United States)

    Elvidge, Christopher D.; Sutton, Paul C.; Ghosh, Tilottama; Tuttle, Benjamin T.; Baugh, Kimberly E.; Bhaduri, Budhendra; Bright, Edward

    2009-08-01

    A global poverty map has been produced at 30 arcsec resolution using a poverty index calculated by dividing population count (LandScan 2004) by the brightness of satellite observed lighting (DMSP nighttime lights). Inputs to the LandScan product include satellite-derived land cover and topography, plus human settlement outlines derived from high-resolution imagery. The poverty estimates have been calibrated using national level poverty data from the World Development Indicators (WDI) 2006 edition. The total estimate of the numbers of individuals living in poverty is 2.2 billion, slightly under the WDI estimate of 2.6 billion. We have demonstrated a new class of poverty map that should improve over time through the inclusion of new reference data for calibration of poverty estimates and as improvements are made in the satellite observation of human activities related to economic activity and technology access.

  5. Development and characterization of Carbon Observing Satellite

    Science.gov (United States)

    Zhang, Hang; Lin, Chao; Zheng, Yuquan; Wang, Wenquan; Tian, Longfei; Liu, Dongbin; Li, Shuai

    2016-04-01

    Carbon Observing Satellite (Tan-Sat) is the first satellite of China designed to monitor column-averaged atmospheric carbon dioxide (X) by detecting gas absorption spectra of the solar shortwave infrared radiation reflected from the Earth's surface and atmosphere. Two instruments are accommodated on Tan-Sat: the high resolution hyperspectral sensor for carbon observation grating spectrometer (HRHS-GS) and the cloud and aerosol polarimetric imager (CAPI). HRHS-GS will provide the space-based measurements of CO2 on a scale and with the accuracy and precision to quantify terrestrial sources and sinks of CO2. CAPI is used to identify the contamination by optically thick clouds and to minimize the impact of scattering by aerosol. These two instruments work together to collect global column CO2 concentrations with correction for cloud and aerosol contamination. The instrument design of HRHS-GS is presented. Ocean reflectivity and the incident radiation of the instrument for transverse electric and transverse magnetic polarizations in glint mode are discussed. The changes to glint mode operation are described. The spectral characteristics of HRHS-GS were determined through the laser-based spectral calibration. The onboard spectral calibration method based on spectrum matching is introduced. The availability was verified, satisfying the onboard spectral calibration accuracy requirement of better than Δλ/10 (Δλ is spectral resolution).

  6. Evaluation of satellite rainfall products through hydrologic simulation in a fully distributed hydrologic model

    Science.gov (United States)

    Bitew, Menberu M.; Gebremichael, Mekonnen

    2011-06-01

    The goal of this study is to evaluate the accuracy of four global high-resolution satellite rainfall products (CMORPH, TMPA 3B42RT, TMPA 3B42, and PERSIANN) through the hydrologic simulation of a 1656 km2 mountainous watershed in the fully distributed MIKE SHE hydrologic model. This study shows that there are significant biases in the satellite rainfall estimates and large variations in rainfall amounts, leading to large variations in hydrologic simulations. The rainfall algorithms that use primarily microwave data (CMORPH and TMPA 3B42RT) show consistent and better performance in streamflow simulation (bias in the order of -53% to -3%, Nash-Sutcliffe efficiency (NSE) from 0.34 to 0.65); the rainfall algorithm that uses primarily infrared data (PERSIANN) shows lower performance (bias from -82% to -3%, Nash-Sutcliffe efficiency from -0.39 to 0.43); and the rainfall algorithm that merges the satellite data with rain gage data (TMPA 3B42) shows inconsistencies and the lowest performance (bias from -86% to 0.43%, Nash-Sutcliffe efficiency from -0.50 to 0.27). A dilemma between calibrating the hydrologic model with rain gage data and calibrating it with the corresponding satellite rainfall data is presented. Calibrating the model with corresponding satellite rainfall data increases the performance of satellite streamflow simulation compared to the model calibrated with rain gage data, but decreases the performance of satellite evapotranspiration simulation.

  7. UVIS G280 Wavelength Calibration

    Science.gov (United States)

    Bushouse, Howard

    2009-07-01

    Wavelength calibration of the UVIS G280 grism will be established using observations of the Wolf Rayet star WR14. Accompanying direct exposures will provide wavelength zeropoints for dispersed exposures. The calibrations will be obtained at the central position of each CCD chip and at the center of the UVIS field. No additional field-dependent variations will be obtained.

  8. Radiometric Cross-Calibration of the HJ-1B IRS in the Thermal Infrared Spectral Band

    Science.gov (United States)

    Sun, K.

    2012-12-01

    The natural calamities occur continually, environment pollution and destruction in a severe position on the earth presently, which restricts societal and economic development. The satellite remote sensing technology has an important effect on improving surveillance ability of environment pollution and natural calamities. The radiometric calibration is precondition of quantitative remote sensing; which accuracy decides quality of the retrieval parameters. Since the China Environment Satellite (HJ-1A/B) has been launched successfully on September 6th, 2008, it has made an important role in the economic development of China. The satellite has four infrared bands; and one of it is thermal infrared. With application fields of quantitative remote sensing in china, finding appropriate calibration method becomes more and more important. Many kinds of independent methods can be used to do the absolute radiometric calibration. In this paper, according to the characteristic of thermal infrared channel of HJ-1B thermal infrared multi-spectral camera, the thermal infrared spectral band of HJ-1B IRS was calibrated using cross-calibration methods based on MODIS data. Firstly, the corresponding bands of the two sensors were obtained. Secondly, the MONDTRAN was run to analyze the influences of different spectral response, satellite view zenith angle, atmosphere condition and temperature on the match factor. In the end, their band match factor was calculated in different temperature, considering the dissimilar band response of the match bands. Seven images of Lake Qinghai in different time were chosen as the calibration data. On the basis of radiance of MODIS and match factor, the IRS radiance was calculated. And then the calibration coefficients were obtained by linearly regressing the radiance and the DN value. We compared the result of this cross-calibration with that of the onboard blackbody calibration, which consistency was good.The maximum difference of brightness temperature

  9. Application of the Langley plot for calibration of sun sensors for the Halogen Occultation Experiment (HALOE)

    Science.gov (United States)

    Moore, Alvah S., Jr.; Mauldin, L. ED, III; Stump, Charles W.; Reagan, John A.; Fabert, Milton G.

    1989-01-01

    The calibration of the Halogen Occultation Experiment (HALOE) sun sensor is described. This system consists of two energy-balancing silicon detectors which provide coarse azimuth and elevation control signals and a silicon photodiode array which provides top and bottom solar edge data for fine elevation control. All three detectors were calibrated on a mountaintop near Tucson, Ariz., using the Langley plot technique. The conventional Langley plot technique was modified to allow calibration of the two coarse detectors, which operate wideband. A brief description of the test setup is given. The HALOE instrument is a gas correlation radiometer that is now being developed for the Upper Atmospheric Research Satellite.

  10. Phylogeography of the common vampire bat (Desmodus rotundus: Marked population structure, Neotropical Pleistocene vicariance and incongruence between nuclear and mtDNA markers

    Directory of Open Access Journals (Sweden)

    Morgante João S

    2009-12-01

    Full Text Available Abstract Background The common vampire bat Desmodus rotundus is an excellent model organism for studying ecological vicariance in the Neotropics due to its broad geographic range and its preference for forested areas as roosting sites. With the objective of testing for Pleistocene ecological vicariance, we sequenced a mitocondrial DNA (mtDNA marker and two nuclear markers (RAG2 and DRB to try to understand how Pleistocene glaciations affected the distribution of intraspecific lineages in this bat. Results Five reciprocally monophyletic clades were evident in the mitochondrial gene tree, and in most cases with high bootstrap support: Central America (CA, Amazon and Cerrado (AMC, Pantanal (PAN, Northern Atlantic Forest (NAF and Southern Atlantic Forest (SAF. The Atlantic forest clades formed a monophyletic clade with high bootstrap support, creating an east/west division for this species in South America. On the one hand, all coalescent and non-coalescent estimates point to a Pleistocene time of divergence between the clades. On the other hand, the nuclear markers showed extensive sharing of haplotypes between distant localities, a result compatible with male-biased gene flow. In order to test if the disparity between the mitochondrial and nuclear markers was due to the difference in mutation rate and effective size, we performed a coalescent simulation to examine the feasibility that, given the time of separation between the observed lineages, even with a gene flow rate close to zero, there would not be reciprocal monophyly for a neutral nuclear marker. We used the observed values of theta and an estimated mutation rate for the nuclear marker gene to perform 1000 iterations of the simulation. The results of this simulation were inconclusive: the number of iterations with and without reciprocal monophyly of one or more clades are similar. Conclusions We therefore conclude that the pattern exhibited by the common vampire bat, with marked

  11. Cobalt source calibration

    Energy Technology Data Exchange (ETDEWEB)

    Rizvi, H.M.

    1999-12-03

    The data obtained from these tests determine the dose rate of the two cobalt sources in SRTC. Building 774-A houses one of these sources while the other resides in room C-067 of Building 773-A. The data from this experiment shows the following: (1) The dose rate of the No.2 cobalt source in Building 774-A measured 1.073 x 10{sup 5} rad/h (June 17, 1999). The dose rate of the Shepherd Model 109 Gamma cobalt source in Building 773-A measured 9.27 x 10{sup 5} rad/h (June 25, 1999). These rates come from placing the graduated cylinder containing the dosimeter solution in the center of the irradiation chamber. (2) Two calibration tests in the 774-A source placed the graduated cylinder with the dosimeter solution approximately 1.5 inches off center in the axial direction. This movement of the sample reduced the measured dose rate 0.92% from 1.083 x 10{sup 5} rad/h to 1.073 x 10{sup 5} rad/h. and (3) A similar test in the cobalt source in 773-A placed the graduated cylinder approximately 2.0 inches off center in the axial direction. This change in position reduced the measured dose rate by 10.34% from 1.036 x 10{sup 6} to 9.27 x 10{sup 5}. This testing used chemical dosimetry to measure the dose rate of a radioactive source. In this method, one determines the dose by the chemical change that takes place in the dosimeter. For this calibration experiment, the author used a Fricke (ferrous ammonium sulfate) dosimeter. This solution works well for dose rates to 10{sup 7} rad/h. During irradiation of the Fricke dosimeter solution the Fe{sup 2+} ions ionize to Fe{sup 3+}. When this occurs, the solution acquires a slightly darker tint (not visible to the human eye). To determine the magnitude of the change in Fe ions, one places the solution in an UV-VIS Spectrophotometer. The UV-VIS Spectrophotometer measures the absorbency of the solution. Dividing the absorbency by the total time (in minutes) of exposure yields the dose rate.

  12. Automated calibration of multistatic arrays

    Energy Technology Data Exchange (ETDEWEB)

    Henderer, Bruce

    2017-03-14

    A method is disclosed for calibrating a multistatic array having a plurality of transmitter and receiver pairs spaced from one another along a predetermined path and relative to a plurality of bin locations, and further being spaced at a fixed distance from a stationary calibration implement. A clock reference pulse may be generated, and each of the transmitters and receivers of each said transmitter/receiver pair turned on at a monotonically increasing time delay interval relative to the clock reference pulse. Ones of the transmitters and receivers may be used such that a previously calibrated transmitter or receiver of a given one of the transmitter/receiver pairs is paired with a subsequently un-calibrated one of the transmitters or receivers of an immediately subsequently positioned transmitter/receiver pair, to calibrate the transmitter or receiver of the immediately subsequent transmitter/receiver pair.

  13. Liquid Krypton Calorimeter Calibration Software

    CERN Document Server

    Hughes, Christina Lindsay

    2013-01-01

    Calibration of the liquid krypton calorimeter (LKr) of the NA62 experiment is managed by a set of standalone programs, or an online calibration driver. These programs are similar to those used by NA48, but have been updated to utilize classes and translated to C++ while maintaining a common functionality. A set of classes developed to handle communication with hardware was used to develop the three standalone programs as well as the main driver program for online calibration between bursts. The main calibration driver has been designed to respond to run control commands and receive burst data, both transmitted via DIM. In order to facilitate the process of reading in calibration parameters, a serializable class has been introduced, allowing the replacement of standard text files with XML configuration files.

  14. TIME CALIBRATED OSCILLOSCOPE SWEEP CIRCUIT

    Science.gov (United States)

    Smith, V.L.; Carstensen, H.K.

    1959-11-24

    An improved time calibrated sweep circuit is presented, which extends the range of usefulness of conventional oscilloscopes as utilized for time calibrated display applications in accordance with U. S. Patent No. 2,832,002. Principal novelty resides in the provision of a pair of separate signal paths, each of which is phase and amplitude adjustable, to connect a high-frequency calibration oscillator to the output of a sawtooth generator also connected to the respective horizontal deflection plates of an oscilloscope cathode ray tube. The amplitude and phase of the calibration oscillator signals in the two signal paths are adjusted to balance out feedthrough currents capacitively coupled at high frequencies of the calibration oscillator from each horizontal deflection plate to the vertical plates of the cathode ray tube.

  15. The Advanced LIGO Photon Calibrators

    CERN Document Server

    Karki, S; Kandhasamy, S; Abbott, B P; Abbott, T D; Anders, E H; Berliner, J; Betzwieser, J; Daveloza, H P; Cahillane, C; Canete, L; Conley, C; Gleason, J R; Goetz, E; Kissel, J S; Izumi, K; Mendell, G; Quetschke, V; Rodruck, M; Sachdev, S; Sadecki, T; Schwinberg, P B; Sottile, A; Wade, M; Weinstein, A J; West, M; Savage, R L

    2016-01-01

    The two interferometers of the Laser Interferometry Gravitaional-wave Observatory (LIGO) recently detected gravitational waves from the mergers of binary black hole systems. Accurate calibration of the output of these detectors was crucial for the observation of these events, and the extraction of parameters of the sources. The principal tools used to calibrate the responses of the second-generation (Advanced) LIGO detectors to gravitational waves are systems based on radiation pressure and referred to as Photon Calibrators. These systems, which were completely redesigned for Advanced LIGO, include several significant upgrades that enable them to meet the calibration requirements of second-generation gravitational wave detectors in the new era of gravitational-wave astronomy. We report on the design, implementation, and operation of these Advanced LIGO Photon Calibrators that are currently providing fiducial displacements on the order of $10^{-18}$ m/$\\sqrt{\\textrm{Hz}}$ with accuracy and precision of better ...

  16. The Advanced LIGO photon calibrators

    Science.gov (United States)

    Karki, S.; Tuyenbayev, D.; Kandhasamy, S.; Abbott, B. P.; Abbott, T. D.; Anders, E. H.; Berliner, J.; Betzwieser, J.; Cahillane, C.; Canete, L.; Conley, C.; Daveloza, H. P.; De Lillo, N.; Gleason, J. R.; Goetz, E.; Izumi, K.; Kissel, J. S.; Mendell, G.; Quetschke, V.; Rodruck, M.; Sachdev, S.; Sadecki, T.; Schwinberg, P. B.; Sottile, A.; Wade, M.; Weinstein, A. J.; West, M.; Savage, R. L.

    2016-11-01

    The two interferometers of the Laser Interferometry Gravitational-wave Observatory (LIGO) recently detected gravitational waves from the mergers of binary black hole systems. Accurate calibration of the output of these detectors was crucial for the observation of these events and the extraction of parameters of the sources. The principal tools used to calibrate the responses of the second-generation (Advanced) LIGO detectors to gravitational waves are systems based on radiation pressure and referred to as photon calibrators. These systems, which were completely redesigned for Advanced LIGO, include several significant upgrades that enable them to meet the calibration requirements of second-generation gravitational wave detectors in the new era of gravitational-wave astronomy. We report on the design, implementation, and operation of these Advanced LIGO photon calibrators that are currently providing fiducial displacements on the order of 1 0-18m /√{Hz } with accuracy and precision of better than 1%.

  17. Antenna Calibration and Measurement Equipment

    Science.gov (United States)

    Rochblatt, David J.; Cortes, Manuel Vazquez

    2012-01-01

    A document describes the Antenna Calibration & Measurement Equipment (ACME) system that will provide the Deep Space Network (DSN) with instrumentation enabling a trained RF engineer at each complex to perform antenna calibration measurements and to generate antenna calibration data. This data includes continuous-scan auto-bore-based data acquisition with all-sky data gathering in support of 4th order pointing model generation requirements. Other data includes antenna subreflector focus, system noise temperature and tipping curves, antenna efficiency, reports system linearity, and instrument calibration. The ACME system design is based on the on-the-fly (OTF) mapping technique and architecture. ACME has contributed to the improved RF performance of the DSN by approximately a factor of two. It improved the pointing performances of the DSN antennas and productivity of its personnel and calibration engineers.

  18. The plastic scintillator detector calibration circuit for DAMPE

    Science.gov (United States)

    Yang, Haibo; Kong, Jie; Zhao, Hongyun; Su, Hong

    2016-07-01

    The Dark Matter Particle Explorer (DAMPE) is being constructed as a scientific satellite to observe high energy cosmic rays in space. Plastic scintillator detector array (PSD), developed by Institute of Modern Physics, Chinese Academy of Sciences (IMPCAS), is one of the most important parts in the payload of DAMPE which is mainly used for the study of dark matter. As an anti-coincidence detector, and a charged-particle identification detector, the PSD has a total of 360 electronic readout channels, which are distributed at four sides of PSD using four identical front end electronics (FEE). Each FEE reads out 90 charge signals output by the detector. A special calibration circuit is designed in FEE. FPGA is used for on-line control, enabling the calibration circuit to generate the pulse signal with known charge. The generated signal is then sent to the FEE for calibration and self-test. This circuit mainly consists of DAC, operation amplifier, analog switch, capacitance and resistance. By using controllable step pulse, the charge can be coupled to the charge measuring chip using the small capacitance. In order to fulfill the system's objective of large dynamic range, the FEE is required to have good linearity. Thus, the charge-controllable signal is needed to do sweep test on all channels in order to obtain the non-linear parameters for off-line correction. On the other hand, the FEE will run on the satellite for three years. The changes of the operational environment and the aging of devices will lead to parameter variation of the FEE, highlighting the need for regular calibration. The calibration signal generation circuit also has a compact structure and the ability to work normally, with the PSD system's voltage resolution being higher than 0.6%.

  19. Models for Photogrammetric Processing of Information from Resource-P Satellites

    Science.gov (United States)

    Poshekhonov, V.; Eremeev, V.; Kuznetcov, A.; Kochergin, A.

    2016-06-01

    The present paper provides information about imagery and navigation systems of the Russian high resolution satellites "Resource- P". Models of image geolocation used for photogrammetric processing of information from all types of imagery systems are designed. Design of these models is based on two task solutions: correct processing of the measurement information and geometric calibration of the imagery systems. It is shown that for high-precision interior orientation parameters adjustment of the high-resolution "Geoton" instrument the method of self-calibration should be used. The technology of calibration activities is considered. Distinctive features of calibration of the hyperspectral and wide-swath imagery systems are noted. It is represented in the paper that after calibration the root mean square error (RMSE) of measured geodetic coordinates of objects on images do not exceed 10 m. Examples of the obtained models practical application for photogrammetric processing of images from "Resource-P" satellites are shown.

  20. A calibrated Franklin chimes

    Science.gov (United States)

    Gonta, Igor; Williams, Earle

    1994-05-01

    Benjamin Franklin devised a simple yet intriguing device to measure electrification in the atmosphere during conditions of foul weather. He constructed a system of bells, one of which was attached to a conductor that was suspended vertically above his house. The device is illustrated in a well-known painting of Franklin (Cohen, 1985). The elevated conductor acquired a potential due to the electric field in the atmosphere and caused a brass ball to oscillate between two bells. The purpose of this study is to extend Franklin's idea by constructing a set of 'chimes' which will operate both in fair and in foul weather conditions. In addition, a mathematical relationship will be established between the frequency of oscillation of a metallic sphere in a simplified geometry and the potential on one plate due to the electrification of the atmosphere. Thus it will be possible to calibrate the 'Franklin Chimes' and to obtain a nearly instantaneous measurement of the potential of the elevated conductor in both fair and foul weather conditions.

  1. Intra-annual NDVI validation of the Landsat 5 TM radiometric calibration

    Science.gov (United States)

    Chander, G.; Groeneveld, D.P.

    2009-01-01

    Multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone of the extensive archive of moderate‐resolution Earth imagery. Even after more than 24 years of service, the L5 TM is still operational. Given the longevity of the satellite, the detectors have aged and the sensor's radiometric characteristics have changed since launch. The calibration procedures and parameters in the National Land Archive Production System (NLAPS) have also changed with time. Revised radiometric calibrations in 2003 and 2007 have improved the radiometric accuracy of recently processed data. This letter uses the Normalized Difference Vegetation Index (NDVI) as a metric to evaluate the radiometric calibration. The calibration change has improved absolute calibration accuracy, consistency over time, and consistency with Landsat 7 (L7) Enhanced Thematic radiometry and will provide the basis for continued long‐term studies of the Earth's land surfaces.

  2. Mercury Continuous Emmission Monitor Calibration

    Energy Technology Data Exchange (ETDEWEB)

    John Schabron; Eric Kalberer; Ryan Boysen; William Schuster; Joseph Rovani

    2009-03-12

    Mercury continuous emissions monitoring systems (CEMs) are being implemented in over 800 coal-fired power plant stacks throughput the U.S. Western Research Institute (WRI) is working closely with the Electric Power Research Institute (EPRI), the National Institute of Standards and Technology (NIST), and the Environmental Protection Agency (EPA) to facilitate the development of the experimental criteria for a NIST traceability protocol for dynamic elemental mercury vapor calibrators/generators. These devices are used to calibrate mercury CEMs at power plant sites. The Clean Air Mercury Rule (CAMR) which was published in the Federal Register on May 18, 2005 and vacated by a Federal appeals court in early 2008 required that calibration be performed with NIST-traceable standards. Despite the vacature, mercury emissions regulations in the future will require NIST traceable calibration standards, and EPA does not want to interrupt the effort towards developing NIST traceability protocols. The traceability procedures will be defined by EPA. An initial draft traceability protocol was issued by EPA in May 2007 for comment. In August 2007, EPA issued a conceptual interim traceability protocol for elemental mercury calibrators. The protocol is based on the actual analysis of the output of each calibration unit at several concentration levels ranging initially from about 2-40 {micro}g/m{sup 3} elemental mercury, and in the future down to 0.2 {micro}g/m{sup 3}, and this analysis will be directly traceable to analyses by NIST. The EPA traceability protocol document is divided into two separate sections. The first deals with the qualification of calibrator models by the vendors for use in mercury CEM calibration. The second describes the procedure that the vendors must use to certify the calibrators that meet the qualification specifications. The NIST traceable certification is performance based, traceable to analysis using isotope dilution inductively coupled plasma

  3. Automatic magnetometer calibration with small space coverage

    Science.gov (United States)

    Wahdan, Ahmed

    The use of a standalone Global Navigation Satellite System (GNSS) has proved to be insufficient when navigating indoors or in urban canyons due to multipath or obstruction. Recent technological advances in low cost micro-electro-mechanical system (MEMS) -- based sensors (like accelerometers, gyroscopes and magnetometers) enabled the development of sensor-based navigation systems. Although MEMS sensors are low-cost, lightweight, small size, and have low-power consumption, they have complex error characteristics. Accurate computation of the heading angle (azimuth) is one of the most important aspects of any navigation system. It can be computed either by gyroscopes or magnetometers. Gyroscopes are inertial sensors that can provide the angular rate from which the heading can be calculated, however, their outputs drift with time. Moreover, the accumulated errors due to mathematical integration, performed to obtain the heading angle, lead to large heading errors. On the other hand, magnetometers do not suffer from drift and the calculation of heading does not suffer from error accumulation. They can provide an absolute heading from the magnetic north by sensing the earth's magnetic field. However, magnetometer readings are usually affected by magnetic fields, other than the earth magnetic field, and by other error sources; therefore magnetometer calibration is required to use magnetometer as a reliable source of heading in navigation applications. In this thesis, a framework for fast magnetometer calibration is proposed. This framework requires little space coverage with no user involvement in the calibration process, and does not need specific movements to be performed. The proposed techniques are capable of performing both 2-dimensional (2D) and 3-dimensional (3D) calibration for magnetometers. They are developed to consider different scenarios suitable for different applications, and can benefit from natural device movements. Some applications involve tethering the

  4. Mobile satellite communications handbook

    CERN Document Server

    Cochetti, Roger

    2014-01-01

    With a Preface by noted satellite scientist Dr. Ahmad Ghais, the Second Edition reflects the expanded user base for this technology by updating information on historic, current, and planned commercial and military satellite systems and by expanding sections that explain the technology for non-technical professionals.   The book begins with an introduction to satellite communications and goes on to provide an overview of the technologies involved in mobile satellite communications, providing basic introductions to RF Issues, power Issues, link issues and system issues. It describes

  5. Satellite communication antenna technology

    Science.gov (United States)

    Mittra, R. (Editor); Imbriale, W. A. (Editor); Maanders, E. J. (Editor)

    1983-01-01

    A general overview of current technology in the field of communication satellite antennas is presented. Among the topics discussed are: the design of multiple beam systems; frequency reuse; and polarization control of antenna measurements. Consideration is also given to: contour beam synthesis; dual shaped reflector synthesis; beam shaping; and offset reflector design. The applications of the above technologies to present and future generations of communications satellites is considered, with emphasis given to such systems as: the Intelsats; the Defense Satellite Communications System, (DSCS-III); Satellite Business System (SBS), and Comstar.

  6. Methods of satellite oceanography

    Science.gov (United States)

    Stewart, R. H.

    1985-01-01

    The theoretical basis for remote sensing measurements of climate and ocean dynamics is examined. Consideration is given to: the absorption of electromagnetic radiation in the atmosphere; scattering in the atmosphere; and satellite observations using visible light. Consideration is also given to: the theory of radio scatter from the sea; scatter of centimeter waves from the sea; and the theory of operation of synthetic aperture radars. Additional topics include: the coordinate systems of satellite orbits for oceanographic remote sensing applications; the operating features of the major U.S. satellite systems for viewing the ocean; and satellite altimetry.

  7. Efficient statistical classification of satellite measurements

    CERN Document Server

    Mills, Peter

    2012-01-01

    Supervised statistical classification is a vital tool for satellite image processing. It is useful not only when a discrete result, such as feature extraction or surface type, is required, but also for continuum retrievals by dividing the quantity of interest into discrete ranges. Because of the high resolution of modern satellite instruments and because of the requirement for real-time processing, any algorithm has to be fast to be useful. Here we describe an algorithm based on kernel estimation called Adaptive Gaussian Filtering that incorporates several innovations to produce superior efficiency as compared to three other popular methods: k-nearest-neighbour (KNN), Learning Vector Quantization (LVQ) and Support Vector Machines (SVM). This efficiency is gained with no compromises: accuracy is maintained, while estimates of the conditional probabilities are returned. These are useful not only to gauge the accuracy of an estimate in the absence of its true value, but also to re-calibrate a retrieved image and...

  8. Multi-locus sequence data reveal a new species of coral reef goby (Teleostei: Gobiidae: Eviota), and evidence of Pliocene vicariance across the Coral Triangle.

    Science.gov (United States)

    Tornabene, L; Valdez, S; Erdmann, M V; Pezold, F L

    2016-05-01

    Here, multi-locus sequence data are coupled with observations of live colouration to recognize a new species, Eviota punyit from the Coral Triangle, Indian Ocean and Red Sea. Relaxed molecular clock divergence time estimation indicates a Pliocene origin for the new species, and the current distribution of the new species and its sister species Eviota sebreei supports a scenario of vicariance across the Indo-Pacific Barrier, followed by subsequent range expansion and overlap in the Coral Triangle. These results are consistent with the 'centre of overlap' hypothesis, which states that the increased diversity in the Coral Triangle is due in part to the overlapping ranges of Indian Ocean and Pacific Ocean faunas. These findings are discussed in the context of other geminate pairs of coral reef fishes separated by the Indo-Pacific Barrier.

  9. Small Satellite Passive Magnetic Attitude Control

    Science.gov (United States)

    Gerhardt, David T.

    Passive Magnetic Attitude Control (PMAC) is capable of aligning a satellite within 5 degrees of the local magnetic field at low resource cost, making it ideal for a small satellite. However, simulation attempts to date have not been able to predict the attitude dynamics at a level sufficient for mission design. Also, some satellites have suffered from degraded performance due to an incomplete understanding of PMAC system design. This dissertation alleviates these issues by discussing the design, inputs, and validation of PMAC systems for small satellites. Design rules for a PMAC system are defined using the Colorado Student Space Weather Experiment (CSSWE) CubeSat as an example. A Multiplicative Extended Kalman Filter (MEKF) is defined for the attitude determination of a PMAC satellite without a rate gyro. After on-orbit calibration of the off-the-shelf magnetometer and photodiodes and an on-orbit fit to the satellite magnetic moment, the MEKF regularly achieves a three sigma attitude uncertainty of 4 degrees or less. CSSWE is found to settle to the magnetic field in seven days, verifying its attitude design requirement. A Helmholtz cage is constructed and used to characterize the CSSWE bar magnet and hysteresis rods both individually and in the flight configuration. Fitted parameters which govern the magnetic material behavior are used as input to a PMAC dynamics simulation. All components of this simulation are described and defined. Simulation-based dynamics analysis shows that certain initial conditions result in abnormally decreased settling times; these cases may be identified by their dynamic response. The simulation output is compared to the MEKF output; the true dynamics are well modeled and the predicted settling time is found to possess a 20 percent error, a significant improvement over prior simulation.

  10. Mexican national pyronometer network calibration

    Science.gov (United States)

    VAldes, M.; Villarreal, L.; Estevez, H.; Riveros, D.

    2013-12-01

    In order to take advantage of the solar radiation as an alternate energy source it is necessary to evaluate the spatial and temporal availability. The Mexican National Meterological Service (SMN) has a network with 136 meteorological stations, each coupled with a pyronometer for measuring the global solar radiation. Some of these stations had not been calibrated in several years. The Mexican Department of Energy (SENER) in order to count on a reliable evaluation of the solar resource funded this project to calibrate the SMN pyrometer network and validate the data. The calibration of the 136 pyronometers by the intercomparison method recommended by the World Meterological Organization (WMO) requires lengthy observations and specific environmental conditions such as clear skies and a stable atmosphere, circumstances that determine the site and season of the calibration. The Solar Radiation Section of the Instituto de Geofísica of the Universidad Nacional Autónoma de México is a Regional Center of the WMO and is certified to carry out the calibration procedures and emit certificates. We are responsible for the recalibration of the pyronometer network of the SMN. A continuous emission solar simulator with exposed areas with 30cm diameters was acquired to reduce the calibration time and not depend on atmospheric conditions. We present the results of the calibration of 10 thermopile pyronometers and one photovoltaic cell by the intercomparison method with more than 10000 observations each and those obtained with the solar simulator.

  11. Calibrating coastal GNSS-R instrumentation

    Science.gov (United States)

    Löfgren, Johan; Haas, Rüdiger; Hobiger, Thomas

    2015-04-01

    Since 2011, a GNSS-R (Global Navigation Satellite System - Reflectometry) instrument for local sea level observations is operated at the Onsala Space Observatory (Löfgren et al., 2011). The Onsala Space Observatory is the Swedish geodetic fundamental station, located at the Swedish West Coast, and contributes to the Global Geodetic Observing System (GGOS) by a variety of geodetic and geophysical observations. The Onsala GNSS-R instrumentation consists of two GNSS antennas that are mounted back-to-back on a bar at the coastline extending over the open sea in southward direction. One of the antennas is upward oriented and receives the direct satellite signals, while the other antenna is downward oriented and receives the satellite signals that reflect off the sea surface. The antennas are connected to a commercial GNSS receiver each and data are recorded with sampling rate of up to 20 Hz. Satellite signals of several GNSS are received and are analysed with various different analysis strategies to provide sea level results with different temporal resolution and precision (Larson et al., 2013; Löfgren and Haas, 2014). Since the instrumentation uses GNSS signals, it is possible to derive both local sea level, i.e. relative to the coast, and absolute sea level, i.e. relative to the geocentre as realised by the GNSS. The bar carrying the two antennas can be placed in 10 different vertical positions covering a height difference of 2.5 m between the highest and lowest position. We present results from a calibration campaign of the Onsala GNSS-R instrumentation performed in 2014. During this several weeks long campaign the antennas were placed at different vertical positions for several days at each position. The recorded data are analysed with the different analysis strategies, and the results are compared to the results derived from the co-located tide gauge equipment. References - Löfgren J, Haas R, Scherneck H-G (2011). Three months of local sea-level derived from

  12. Global Warming: Evidence from Satellite Observations

    Science.gov (United States)

    Prabhakara, C.; Iacovazzi, R., Jr.; Yoo, J.-M.

    2001-01-01

    Observations made in Channel 2 (53.74 GHz) of the Microwave Sounding Unit (MSU) radiometer, flown on-board sequential, sun-synchronous, polar orbiting NOAA operational satellites, indicate that the mean temperature of the atmosphere over the globe increased during the period 1980 to 1999. In this study we have minimized systematic errors in the time series introduced by the satellite orbital drift in an objective manner. This is done with the help the onboard warm black body temperature, which is used in the calibration of the MSU radiometer. The corrected MSU Channel 2 observations of the NOAA satellite series reveal that the vertically weighted global mean temperature of the atmosphere, with a peak weight near the mid-troposphere, warmed at the rate of 0.13 K per decade (with an uncertainty of 0.05 K per decade) during 1980 to 1999. The global warming deduced from conventional meteorological data that have been corrected for urbanization effects agrees reasonably with this satellite deuced result.

  13. Image Dodging Algorithm for GF-1 Satellite WFV Imagery

    Directory of Open Access Journals (Sweden)

    HAN Jie

    2016-12-01

    Full Text Available Image dodging method is one of the important processes that determines whether the mosaicking image can be used for remote sensing quantitative application. GF-1 satellite is the first satellite in CHEOS (Chinese high-resolution earth observation system. WFV multispectral sensor is one of the instruments onboard GF-1 satellite which consist of four cameras to mosaic imaging. According to the characteristics of WFV sensor, this paper proposes an image dodging algorithm based on cross/inter-radiometric calibration method. First, the traditional cross calibration method is applied to obtain the calibration coefficients of one WFV camera. Then statistical analysis and simulation methods are adopted to build the correlation models of DN and TOA (top of atmosphere radiances between adjacent cameras. The proposed method can not only accomplish the radiation performance transfer, but also can fulfill the image dodging. The experimental results show the cross/inter-radiometric calibration coefficients in this paper can effectively eliminate the radiation inconsistency problem of the adjacent camera image which realizes the image dodging. So our proposed dodging method can provide an important reference for other similar sensor in future.

  14. Calibrating System for Vacuum Gauges

    Institute of Scientific and Technical Information of China (English)

    MengJun; YangXiaotian; HaoBinggan; HouShengjun; HuZhenjun

    2003-01-01

    In order to measure the vacuum degree, a lot of vacuum gauges will be used in CSR vacuum system. We bought several types of vacuum gauges. We know that different typos of vacuum gauges or even one type of vacuum gauges have different measure results in same condition, so they must be calibrated. But it seems impossible for us to send so many gauges to the calibrating station outside because of the high price. So the best choice is to build a second class calibrating station for vacuum gauges by ourselves (Fig.l).

  15. Jet energy calibration in ATLAS

    CERN Document Server

    Schouten, Doug

    A correct energy calibration for jets is essential to the success of the ATLAS experi- ment. In this thesis I study a method for deriving an in situ jet energy calibration for the ATLAS detector. In particular, I show the applicability of the missing transverse energy projection fraction method. This method is shown to set the correct mean energy for jets. Pileup effects due to the high luminosities at ATLAS are also stud- ied. I study the correlations in lateral distributions of pileup energy, as well as the luminosity dependence of the in situ calibration metho

  16. Observations of the moon by the global ozone monitoring experiment: radiometric calibration and lunar albedo

    NARCIS (Netherlands)

    Dobber, M.R.; Goede, A.P.H.; Burrows, J.P.

    1998-01-01

    The Global Ozone Monitoring Experiment (GOME) is a new instrument, which was launched aboard the second European Remoting Sensing satellite ESA-ERS2 in 1995. For its long-term radiometric and spectral calibration the GOME observes the sun and less frequently the moon on a regular basis. These measur

  17. Calibration and validation of the COSMOS rover for surface soil moisture

    Science.gov (United States)

    The mobile COsmic-ray Soil Moisture Observing System (COSMOS) rover may be useful for validating satellite-based estimates of near surface soil moisture, but the accuracy with which the rover can measure 0-5 cm soil moisture has not been previously determined. Our objectives were to calibrate and va...

  18. Using SPOT data for calibrating a wheat growth model under Mediterranean conditions

    NARCIS (Netherlands)

    Clevers, J.G.P.W.; Vonder, O.W.; Jongschaap, R.E.E.; Desprats, J.F.; King, C.; Prévot, L.; Bruguier, N.

    2002-01-01

    This paper describes the use of SPOT satellite data for deriving crop biophysical parameters at various dates during the growing season. In particular, the leaf area index (LAI) was estimated by using the semi-empirical CLAIR model. Subsequently, these LAI estimates were used for calibrating the mec

  19. Sea ice-atmospheric interaction: Application of multispectral satellite data in polar surface energy flux estimates

    Science.gov (United States)

    Steffen, Konrad; Key, J.; Maslanik, J.; Schweiger, A.

    1993-01-01

    This is the third annual report on: Sea Ice-Atmosphere Interaction - Application of Multispectral Satellite Data in Polar Surface Energy Flux Estimates. The main emphasis during the past year was on: radiative flux estimates from satellite data; intercomparison of satellite and ground-based cloud amounts; radiative cloud forcing; calibration of the Advanced Very High Resolution Radiometer (AVHRR) visible channels and comparison of two satellite derived albedo data sets; and on flux modeling for leads. Major topics covered are arctic clouds and radiation; snow and ice albedo, and leads and modeling.

  20. Calibration of DMSP SSM/I and SSM/IS for Weather and Climate Applications

    Science.gov (United States)

    Weng, F.

    2006-05-01

    Since the launch of the first DMSP F8 satellite in 1987, the microwave data from all SSM/I have been utilized to improve weather forecasts. For climate studies, it is important to ensure calibration consistency and traceability across all satellite instruments. NOAA/NESDIS is developing an integrated system for satellite inter-calibrations including DMSP sensors. In this system, the coincident observations from different sensors are generated to characterize differences between sensors and improve radiometric calibration. This system is currently used for processing real-time data and extended to past data for NOAA satellites. For DMSP SSM//I instruments, the method referred as the Simultaneous Nadir Overpass (SNO) (Cao et al., 2005) is modified to take into account the SSM/I conical viewing geometry. The measurements from the SSM/I simultaneous conical overpass (SCO) are matched from two satellites that have overlapping time. Since SSM/I is an imager more sensitive to surface properties, the matched data from SCO will require more quality controls in discriminating the inhomogeneity effects from surface snow and sea ice prior to uses in the inter-calibration. Our preliminary analysis has indicated that SCO derived data can be used to remove the biases among all SSM/I instruments and calibrate all SSM/I instruments to the same reference level. This activity will lead to fundamental climate data records (FCDR) from SSM/I radiances On board DMSP F-16 satellite, the Special Sensor Microwave Imager/Sounder (SSMIS) measures the Earth's microwave radiation at frequencies ranging from 19 to 183 GHz. This instrument is designed to improve atmospheric sounding capability by uses of both imaging and sounding channels in the conical scanning mode. However, there remain several outstanding issues related to the SSMIS calibration. First, an extra energy arises from the emission and/or scattering through its main reflector and results in anomalous scene temperatures. It is

  1. Satellites of spiral galaxies

    Science.gov (United States)

    Zaritsky, Dennis; Smith, Rodney; Frenk, Carlos; White, Simon D. M.

    1993-01-01

    We present a survey of satellites around a homogeneous set of late-type spirals with luminosity similar to that of the Milky Way. On average, we find fewer than 1.5 satellites per primary, but we argue that we can treat the survey as an ensemble and so derive the properties of the halo of a 'typical' isolated spiral. The projected density profile of the ensemble falls off approximately as 1/r. Within 50 kpc the azimuthal distribution of satellites shows some evidence for the 'Holmberg effect', an excess near the minor axis of the primary; however, at larger projected distances, the distribution appears isotropic. There is a weak but significant correlation between the size of a satellite and its distance from its primary, as expected if satellites are tidally truncated. Neither Hubble type nor spectral characteristics correlate with apparent separation. The ensemble of satellites appears to be rotating at about 30 km/s in the same direction as the galactic disk. Satellites on prograde orbits tend to be brighter than those on retrograde orbits. The typical velocity difference between a satellite and its primary shows no clear dependence either on apparent separation, or on the rotation speed of the primary. Thus our survey demonstrates that isolated spiral galaxies have massive halos that extend to many optical radii.

  2. Communication satellite technology trends

    Science.gov (United States)

    Cuccia, Louis

    1986-01-01

    A chronology of space-Earth interconnectivity is presented. The Advanced Communications Technology Satellite (ACTS) system, Land Mobile Satellite, space-Earth antennas, impact of antenna size on coverage, intersatellite links are outlined. This presentation is represented by graphs and charts only.

  3. Coast guard STD calibration procedures

    National Research Council Canada - National Science Library

    Freeman, R.H; Krug, W.S

    1973-01-01

    This manual describes the procedures used by the Coast Guard Oceanographic UNIT (CGOU) to calibrate several Model 9040 STD systems, manufactured by Plessey Environmental Systems, currently in use within the Coast Guard...

  4. Calibration of "Babyline" RP instruments

    CERN Multimedia

    2015-01-01

      If you have old RP instrumentation of the “Babyline” type, as shown in the photo, please contact the Radiation Protection Group (Joffrey Germa, 73171) to have the instrument checked and calibrated. Thank you. Radiation Protection Group

  5. Field calibration of cup anemometers

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, L.; Jensen, G.; Hansen, A.; Kirkegaard, P.

    2001-01-01

    An outdoor calibration facility for cup anemometers, where the signals from 10 anemometers of which at least one is a reference can be recorded simultaneously, has been established. The results are discussed with special emphasis on the statistical significance of the calibration expressions. It is concluded that the method has the advantage that many anemometers can be calibrated accurately with a minimum of work and cost. The obvious disadvantage is that the calibration of a set of anemometers may take more than one month in order to have wind speeds covering a sufficiently large magnitude range in a wind direction sector where we can be sure that the instruments are exposed to identical, simultaneous wind flows. Another main conclusion is that statistical uncertainty must be carefully evaluated since the individual 10 minute wind-speed averages are not statistically independent. (au)

  6. Bayesian Calibration of Microsimulation Models.

    Science.gov (United States)

    Rutter, Carolyn M; Miglioretti, Diana L; Savarino, James E

    2009-12-01

    Microsimulation models that describe disease processes synthesize information from multiple sources and can be used to estimate the effects of screening and treatment on cancer incidence and mortality at a population level. These models are characterized by simulation of individual event histories for an idealized population of interest. Microsimulation models are complex and invariably include parameters that are not well informed by existing data. Therefore, a key component of model development is the choice of parameter values. Microsimulation model parameter values are selected to reproduce expected or known results though the process of model calibration. Calibration may be done by perturbing model parameters one at a time or by using a search algorithm. As an alternative, we propose a Bayesian method to calibrate microsimulation models that uses Markov chain Monte Carlo. We show that this approach converges to the target distribution and use a simulation study to demonstrate its finite-sample performance. Although computationally intensive, this approach has several advantages over previously proposed methods, including the use of statistical criteria to select parameter values, simultaneous calibration of multiple parameters to multiple data sources, incorporation of information via prior distributions, description of parameter identifiability, and the ability to obtain interval estimates of model parameters. We develop a microsimulation model for colorectal cancer and use our proposed method to calibrate model parameters. The microsimulation model provides a good fit to the calibration data. We find evidence that some parameters are identified primarily through prior distributions. Our results underscore the need to incorporate multiple sources of variability (i.e., due to calibration data, unknown parameters, and estimated parameters and predicted values) when calibrating and applying microsimulation models.

  7. Pressures Detector Calibration and Measurement

    CERN Document Server

    AUTHOR|(CDS)2156315

    2016-01-01

    This is report of my first and second projects (of 3) in NA61. I did data taking and analysis in order to do calibration of pressure detectors and verified it. I analyzed the data by ROOT software using the C ++ programming language. The first part of my project was determination of calibration factor of pressure sensors. Based on that result, I examined the relation between pressure drop, gas flow rate of in paper filter and its diameter.

  8. UVIS G280 Flux Calibration

    Science.gov (United States)

    Bushouse, Howard

    2009-07-01

    Flux calibration, image displacement, and spectral trace of the UVIS G280 grism will be established using observations of the HST flux standard start GD71. Accompanying direct exposures will provide the image displacement measurements and wavelength zeropoints for dispersed exposures. The calibrations will be obtained at the central position of each CCD chip and at the center of the UVIS field. No additional field-dependent variations will be derived.

  9. Infrasound Sensor Calibration and Response

    Science.gov (United States)

    2012-09-01

    functions with faster rise times. SUMMARY We have documented past work on the determination of the calibration constant of the LANL infrasound sensor...Monitoring Technologies 735 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is estimated...National Laboratory ( LANL ) has operated an infrasound sensor calibration chamber that operates over a frequency range of 0.02 to 4 Hz. This chamber has

  10. Beam Imaging and Luminosity Calibration

    CERN Document Server

    Klute, Markus; Salfeld-Nebgen, Jakob

    2016-01-01

    We discuss a method to reconstruct two-dimensional proton bunch densities using vertex distributions accumulated during LHC beam-beam scans. The $x$-$y$ correlations in the beam shapes are studied and an alternative luminosity calibration technique is introduced. We demonstrate the method on simulated beam-beam scans and estimate the uncertainty on the luminosity calibration associated to the beam-shape reconstruction to be below 1\\%.

  11. Preparation of a new autonomous instrumented radiometric calibration site: Gobabeb, Namib Desert

    Science.gov (United States)

    Greenwell, Claire; Bialek, Agnieszka; Marks, Amelia; Woolliams, Emma; Berthelot, Béatrice; Meygret, Aimé; Marcq, Sébastien; Bouvet, Marc; Fox, Nigel

    2015-10-01

    A new permanently instrumented radiometric calibration site for high/medium resolution imaging satellite sensors is currently under development, focussing on the visible and near infra-red parts of the spectrum. The site will become a European contribution to the Committee on Earth Observation Satellites (CEOS) initiative RadCalNet (Radiometric Calibration Network). The exact location of the permanent monitoring instrumentation will be defined following the initial site characterisation. The new ESA/CNES RadCalNet site will have a robust uncertainty budget and its data fully SI traceable through detailed characterisation and calibration by NPL of the instruments and artefacts to be used on the site. This includes a CIMEL sun photometer (the permanent instrumentation) an ASD FieldSpec spectroradiometer, Gonio Radiometric Spectrometer System (GRASS), and reference reflectance standards.

  12. Correcting Errors in Catchment-Scale Satellite Rainfall Accumulation Using Microwave Satellite Soil Moisture Products

    Science.gov (United States)

    Ryu, D.; Crow, W. T.

    2011-12-01

    Streamflow forecasting in the poorly gauged or ungauged catchments is very difficult mainly due to the absence of the input forcing data for forecasting models. This challenge poses a threat to human safety and industry in the areas where proper warning system is not provided. Currently, a number of studies are in progress to calibrate streamflow models without relying on ground observations as an effort to construct a streamflow forecasting systems in the ungauged catchments. Also, recent advances in satellite altimetry and innovative application of the optical has enabled mapping streamflow rate and flood extent in the remote areas. In addition, remotely sensed hydrological variables such as the real-time satellite precipitation data, microwave soil moisture retrievals, and surface thermal infrared observations have the great potential to be used as a direct input or signature information to run the forecasting models. In this work, we evaluate a real-time satellite precipitation product, TRMM 3B42RT, and correct errors of the product using the microwave satellite soil moisture products over 240 catchments in Australia. The error correction is made by analyzing the difference between output soil moisture of a simple model forced by the TRMM product and the satellite retrievals of soil moisture. The real-time satellite precipitation products before and after the error correction are compared with the daily gauge-interpolated precipitation data produced by the Australian Bureau of Meteorology. The error correction improves overall accuracy of the catchment-scale satellite precipitation, especially the root mean squared error (RMSE), correlation, and the false alarm ratio (FAR), however, only a marginal improvement is observed in the probability of detection (POD). It is shown that the efficiency of the error correction is affected by the surface vegetation density and the annual precipitation of the catchments.

  13. Calibration of shaft alignment instruments

    Science.gov (United States)

    Hemming, Bjorn

    1998-09-01

    Correct shaft alignment is vital for most rotating machines. Several shaft alignment instruments, ranging form dial indicator based to laser based, are commercially available. At VTT Manufacturing Technology a device for calibration of shaft alignment instruments was developed during 1997. A feature of the developed device is the similarity to the typical use of shaft alignment instruments i.e. the rotation of two shafts during the calibration. The benefit of the rotation is that all errors of the shaft alignment instrument, for example the deformations of the suspension bars, are included. However, the rotation increases significantly the uncertainty of calibration because of errors in the suspension of the shafts in the developed device for calibration of shaft alignment instruments. Without rotation the uncertainty of calibration is 0.001 mm for the parallel offset scale and 0,003 mm/m for the angular scale. With rotation the uncertainty of calibration is 0.002 mm for the scale and 0.004 mm/m for the angular scale.

  14. Landsat-7 ETM+ radiometric stability and absolute calibration

    Science.gov (United States)

    Markham, B.L.; Barker, J.L.; Barsi, J.A.; Kaita, E.; Thome, K.J.; Helder, D.L.; Palluconi, Frank Don; Schott, J.R.; Scaramuzza, P.; ,

    2002-01-01

    Launched in April 1999, the Landsat-7 ETM+ instrument is in its fourth year of operation. The quality of the acquired calibrated imagery continues to be high, especially with respect to its three most important radiometric performance parameters: reflective band instrument stability to better than ??1%, reflective band absolute calibration to better than ??5%, and thermal band absolute calibration to better than ??0.6 K. The ETM+ instrument has been the most stable of any of the Landsat instruments, in both the reflective and thermal channels. To date, the best on-board calibration source for the reflective bands has been the Full Aperture Solar Calibrator, which has indicated changes of at most -1.8% to -2.0% (95% C.I.) change per year in the ETM+ gain (band 4). However, this change is believed to be caused by changes in the solar diffuser panel, as opposed to a change in the instrument's gain. This belief is based partially on ground observations, which bound the changes in gain in band 4 at -0.7% to +1.5%. Also, ETM+ stability is indicated by the monitoring of desert targets. These image-based results for four Saharan and Arabian sites, for a collection of 35 scenes over the three years since launch, bound the gain change at -0.7% to +0.5% in band 4. Thermal calibration from ground observations revealed an offset error of +0.31 W/m 2 sr um soon after launch. This offset was corrected within the U. S. ground processing system at EROS Data Center on 21-Dec-00, and since then, the band 6 on-board calibration has indicated changes of at most +0.02% to +0.04% (95% C.I.) per year. The latest ground observations have detected no remaining offset error with an RMS error of ??0.6 K. The stability and absolute calibration of the Landsat-7 ETM+ sensor make it an ideal candidate to be used as a reference source for radiometric cross-calibrating to other land remote sensing satellite systems.

  15. Spectral Measurements of Geosynchronous Satellites During Glint Season

    Science.gov (United States)

    Chun, F.; Tucker, R.; Weld, E.; Chun, F.; Tippets, R.

    During certain times of the year, stable geosynchronous (GEO) satellites are known to glint or exhibit a very bright specular reflection, which is easily observed through broadband photometric filters. The glints are typically brighter in the Johnson red filter compared to the Johnson blue filter. In previous years, USAFA cadets have developed and refined techniques to take, calibrate and process satellite spectral data taken using a diffraction grating on the USAFA 16-inch, f/8.2 telescope (slitless spectroscopy). To the best of our knowledge, we have not seen any published research on observing glints across the visible spectrum. We present research from an Air Force Academy senior physics capstone project on observing glints off of GEO satellites using slitless spectroscopy. We discuss the calibration of the measurements using solar analog and solar twin stars, as well as results of the spectra of a glinting GEO satellite. A key question is whether a GEO satellite glint is localized in wavelength or equally observed across the entire spectra.

  16. Satellite ocean remote sensing at NOAA/NESDIS

    Science.gov (United States)

    Bayler, Eric J.

    2004-10-01

    Satellite oceanography within the Center for Satellite Applications and Research (STAR) in National Oceanic and Atmospheric Administration"s (NOAA) National Environmental Satellite, Data, and Information Service (NESDIS) focuses on observation retrievals and applications to address the NOAA missions of environmental assessment, prediction, and stewardship. Satellite oceanography within NOAA/NESDIS is an end-to-end process, addressing user requirements, sensor design support, observation retrieval research and development, calibration, applications and product research and development, the transition of research to operations, continuing product validation, and operational user support. The breadth of scientific investigation encompasses three functional areas: satellite ocean sensors, ocean dynamics/data assimilation, and marine ecosystems/climate. A cross-cutting science team from these functional areas has been established for each core subject: sea-surface temperature, sea-surface height, sea-surface roughness, ocean color, ocean surface winds, and sea ice. These science teams pursue the science and issues end to end within the core subject, with the primary objective being the transition of research to operations. Data fusion opportunities between science teams are also pursued. Each science team area addresses the common themes of calibration/validation, data assimilation, climate, and operational oceanography. Experimental and operational products, as well as user support, are provided to the user community via the NOAA OceanWatch/CoastWatch program.

  17. Prelaunch spectral calibration of a carbon dioxide spectrometer

    Science.gov (United States)

    Li, Zhigang; Lin, Chao; Li, Chengliang; Wang, Long; Ji, Zhenhua; Xue, Hao; Wei, Yuefeng; Gong, Chenghu; Gao, Minghui; Liu, Lei; Gao, Zhiliang; Zheng, Yuquan

    2017-06-01

    The carbon dioxide spectrometer (CDS) on board the Chinese Carbon Dioxide Observation Satellite (TanSat) is a high spectral and spatial resolution grating spectrometer with three specific spectral bands dedicated to atmospheric CO2 detection. The CDS’s design and on-ground spectral calibration are presented in this paper. The instrument line shape functions and spectral dispersion were characterized using a tunable diode laser-based testing system for all spectral pixels of the CDS placed in a thermal vacuum chamber.

  18. New Test Facilities For GNSS Testing And Dynamic Calibration

    Directory of Open Access Journals (Sweden)

    Trzuskowsky Andreas

    2014-06-01

    Full Text Available With Galileo, the European GNSS (Global Navigation Satellite System starting early services in 2015, open-area-testing of applications which use the new positioning system gets more and more important. This contribution gives an overview on existing test sites like railGATE, automotiveGATE and seaGATE, it highlights the latest addition for dynamic calibration with geodetic precision and finally describes the testing regime of the BONUS project ANCHOR, where multiple test sites are used for maximum benefit in a maritime application.

  19. Refined empirical line method to calibrate IKONOS imagery

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    To extract quantitative biophysical parameters such as leaf biomass and leaf chlorophyll concentration from the remotely sensed imagery, the effect of atmospheric attenuation must be removed. The refined empirical line (REL) method was used to calibrate the IKONOS multispectral imagery. The IKONOS digital numbers (DN) were converted to the at-satellite retargets are unavailable or measurement of dark target is inconvenient, the REL method was most crucial for retrieving surface spectral reflectance. The REL offers a simple approach for quantitative retrieval of biophysical parameters from IKONOS imagery.

  20. Crowd-Sourced Calibration: The GEDI Strategy for Empirical Biomass Estimation Using Spaceborne Lidar

    Science.gov (United States)

    Dubayah, R.

    2015-12-01

    The central task in estimating forest biomass from spaceborne sensors is the development of calibration equations that relate observed forest structure to biomass at a variety of spatial scales. Empirical methods generally rely on statistical estimation or machine learning techniques where field-based estimates of biomass at the plot level are associated with post-launch observations of variables such as canopy height and cover. For global-scale mapping the process is complex and leads to a number of questions: How many calibrations are required to capture non-stationarity in the relationships? Where does one calibration begin and another end? Should calibrations be conditioned by biome? Vegetation type? Land-use? Post-launch calibrations lead to further complications, such as the requirement to have sufficient field plot data underneath potentially sparse satellite observations, spatial and temporal mismatches in scale between field plots and pixels, and geolocation uncertainty, both in the plots and the satellite data. The Global Ecosystem Dynamics Investigation (GEDI) is under development by NASA to estimate forest biomass. GEDI will deploy a multi-beam lidar on the International Space Station and provide billions of observations of forest structure per year. Because GEDI uses relatively small footprints, about 25 m diameter, post-launch calibration is exceptionally problematic for the reasons listed earlier. Instead, GEDI will use a kind of "crowd-sourced" calibration strategy where existing lidar observations and the corresponding plot biomass will be assembled from data contributed by the science community. Through a process of continuous updating, calibrations will be refined as more data is ingested. This talk will focus on the GEDI pre-launch calibration strategy and present initial progress on its development, and how it forms the basis for meeting mission biomass requirements.

  1. Evolution of the JPSS Ground Project Calibration and Validation System

    Science.gov (United States)

    Chander, G.; Jain, P.

    2014-12-01

    The Joint Polar Satellite System (JPSS) is the National Oceanic and Atmospheric Administration's (NOAA) next-generation operational Earth observation Program that acquires and distributes global environmental data from multiple polar-orbiting satellites. The JPSS Program plays a critical role to NOAA's mission to understand and predict changes in weather, climate, oceans, and coasts environments, which supports the nation's economy and protects lives and property. The National Aeronautics and Space Administration (NASA) is acquiring and implementing the JPSS, comprised of flight and ground systems on behalf of NOAA. The JPSS satellites are planned to fly in afternoon orbit and will provide operational continuity of satellite-based observations and products for NOAA Polar-orbiting Operational Environmental Satellites (POES) and the Suomi National Polar-orbiting Partnership (SNPP) satellite. Government Resource for Algorithm Verification, Independent Test, and Evaluation (GRAVITE) system is a NOAA system developed and deployed by JPSS Ground Project to support Calibration and Validation (Cal/Val), Algorithm Integration, Investigation, and Tuning, and Data Quality Monitoring. It is a mature, deployed system that supports SNPP mission and has been in operations since SNPP launch. This paper discusses the major re-architecture for Block 2.0 that incorporates SNPP lessons learned, architecture of the system, and demonstrates how GRAVITE has evolved as a system with increased performance. It is a robust, reliable, maintainable, scalable, and secure system that supports development, test, and production strings, replaces proprietary and custom software, uses open source software, and is compliant with NASA and NOAA standards. "[Pending NASA Goddard Applied Engineering & Technology Directorate (AETD) Approval]"

  2. Efficient mission control for the 48-satellite Globalstar Constellation

    Science.gov (United States)

    Smith, Dan

    1994-11-01

    The Globalstar system is being developed by Globalstar, Limited Partnership and will utilize 48 satellites in low earth orbit (See Figure 1) to create a world-wide mobile communications system consistent with Vice President Gore's vision of a Global Information Infrastructure. As a large long term commercial system developed by a newly formed organization, Globalstar provides an excellent opportunity to explore innovative solutions for highly efficient satellite command and control. Design and operational concepts being developed are unencumbered by existing physical and organizational infrastructures. This program really is 'starting with a clean sheet of paper'. Globalstar operations challenges can appear enormous. Clearly, assigning even a single person around the clock to monitor and control each satellite is excessive for Globalstar (it would require a staff of 200] . Even with only a single contact per orbit per satellite, data acquisitions will start or stop every 45 seconds] Although essentially identical, over time the satellites will develop their own 'personalities'and will re quire different data calibrations and levels of support. This paper discusses the Globalstar system and challenges and presents engineering concepts, system design decisions, and operations concepts which address the combined needs and concerns of satellite, ground system, and operations teams. Lessons from past missions have been applied, organizational barriers broken, partnerships formed across the mission segments, and new operations concepts developed for satellite constellation management. Control center requirements were then developed from the operations concepts.

  3. A direct comparison between two independently calibrated time transfer techniques: T2L2 and GPS Common-Views

    Science.gov (United States)

    Rovera, G. D.; Abgrall, M.; Courde, C.; Exertier, P.; Fridelance, P.; Guillemot, Ph; Laas-Bourez, M.; Martin, N.; Samain, E.; Sherwood, R.; Torre, J.-M.; Uhrich, P.

    2016-06-01

    We present a direct comparison between two satellite time transfer techniques on independently calibrated links: Time Transfer by Laser Link (T2L2) and Common-Views (CV) of satellites from the Global Positioning System (GPS) constellation. The GPS CV and T2L2 links between three European laboratories where independently calibrated against the same reference point of the local timescales. For all the links the mean values of the differences between GPS CV and T2L2 are equal or below 240 ps, with standard deviations below 500 ps, mostly due to GPS CV. Almost all deviations from 0 ns are within the combined uncertainty estimates. Despite the weak number of common points obtained, due to the fact that T2L2 is weather dependent, these results are providing an unprecedented sub-ns consistency between two independently calibrated microwave and optical satellite time transfer techniques.

  4. Weather satellite picture receiving stations, APT digital scan converter

    Science.gov (United States)

    Vermillion, C. H.; Kamowski, J. C.

    1975-01-01

    The automatic picture transmission digital scan converter is used at ground stations to convert signals received from scanning radiometers to data compatible with ground equipment designed to receive signals from vidicons aboard operational meteorological satellites. Information necessary to understand the circuit theory, functional operation, general construction and calibration of the converter is provided. Brief and detailed descriptions of each of the individual circuits are included, accompanied by a schematic diagram contained at the end of each circuit description. Listings of integral parts and testing equipment required as well as an overall wiring diagram are included. This unit will enable the user to readily accept and process weather photographs from the operational meteorological satellites.

  5. Beginnings of Satellite Navigation

    Directory of Open Access Journals (Sweden)

    Miljenko Solarić

    2008-05-01

    Full Text Available The first satellite navigation system called the Navy Navigation Satellite System (NNSS or TRANSIT was planned in the USA in 1958. It consisted of 5-6 artificial Earth satellites, was set in motion for the USA military in 1964, and in 1967 for civilian purposes. The frequency shift of received radio waves emitted from the satellite and caused by the Doppler effect was measured. The TRANSIT satellite speed of approaching or moving away was derived from that; the TRANSIT satellites emmited also their own coordinates. Then the ship's position was determined by an intersection of three hyperboloids, which were determined from differences of distances in three time intervals. Maintenance of this navigation system was stopped in 1996, but it is still being used in the USA Navy for exploring the ionosphere. Furthermore, results of Doppler measurements in international projects at the Hvar Observatory from 1982 and 1983. This was the first time in Croatia and the former country that the coordinates of the Hvar Observatory were determined in the unique world coordinate system WGS'72. The paper ends with a brief representation of the Tsiklon Doppler navigation system produced in the former Soviet Union, and there is a list of some of numerous produced and designed satellite navigation systems.Ključne riječi

  6. Genetic divergence and evolutionary times: calibrating a protein clock for South-European Stenasellus species (Crustacea, Isopoda

    Directory of Open Access Journals (Sweden)

    Valerio Ketmaier

    1997-01-01

    Full Text Available We studied genetic divergence in a group of exclusively stygobiont isopods of the family Stenasellidae. In particular, we assessed evolutionary relationships among several populations of Stenasellus racovitzai and Stenasellus virei. To place this study in a phylogenetic context. we used another species of Stenasellus, S. assorgiai, as an outgroup. S. racovitzai occurs in Corsica, Sardinia and in the fossil islands of the Tuscan Archipelago, while S. virei is a polytypic species widely distributed in the central France and Pyrenean area. This vicariant distribution is believed to be the result of the disjunction of the Sardinia-Corsica microplate from the Pyrenean region and its subsequent rotation. Since geological data provide time estimates for these events, we can use the genetic distance data to calibrate a molecular clock for this group of stygobiont isopods. The calibration of the molecular clock reveals a roughly linear relationship (r = 0.753 between the genetic distances and absolute divergence times, with a mean divergence rate (19.269 Myr/DNei, different from those previously reported in the literature and provides an opportunity to shed some light on the evolutionary scenarios of other Stenasellus species.

  7. Globally Gridded Satellite observations for climate studies

    Science.gov (United States)

    Knapp, K.R.; Ansari, S.; Bain, C.L.; Bourassa, M.A.; Dickinson, M.J.; Funk, C.; Helms, C.N.; Hennon, C.C.; Holmes, C.D.; Huffman, G.J.; Kossin, J.P.; Lee, H.-T.; Loew, A.; Magnusdottir, G.

    2011-01-01

    Geostationary satellites have provided routine, high temporal resolution Earth observations since the 1970s. Despite the long period of record, use of these data in climate studies has been limited for numerous reasons, among them that no central archive of geostationary data for all international satellites exists, full temporal and spatial resolution data are voluminous, and diverse calibration and navigation formats encumber the uniform processing needed for multisatellite climate studies. The International Satellite Cloud Climatology Project (ISCCP) set the stage for overcoming these issues by archiving a subset of the full-resolution geostationary data at ~10-km resolution at 3-hourly intervals since 1983. Recent efforts at NOAA's National Climatic Data Center to provide convenient access to these data include remapping the data to a standard map projection, recalibrating the data to optimize temporal homogeneity, extending the record of observations back to 1980, and reformatting the data for broad public distribution. The Gridded Satellite (GridSat) dataset includes observations from the visible, infrared window, and infrared water vapor channels. Data are stored in Network Common Data Format (netCDF) using standards that permit a wide variety of tools and libraries to process the data quickly and easily. A novel data layering approach, together with appropriate satellite and file metadata, allows users to access GridSat data at varying levels of complexity based on their needs. The result is a climate data record already in use by the meteorological community. Examples include reanalysis of tropical cyclones, studies of global precipitation, and detection and tracking of the intertropical convergence zone.

  8. Calibration of the SNO+ experiment

    Science.gov (United States)

    Maneira, J.; Falk, E.; Leming, E.; Peeters, S.; SNO+ collaboration.

    2017-09-01

    The main goal of the SNO+ experiment is to perform a low-background and high-isotope-mass search for neutrinoless double-beta decay, employing 780 tonnes of liquid scintillator loaded with tellurium, in its initial phase at 0.5% by mass for a total mass of 1330 kg of 130Te. The SNO+ physics program includes also measurements of geo- and reactor neutrinos, supernova and solar neutrinos. Calibrations are an essential component of the SNO+ data-taking and analysis plan. The achievement of the physics goals requires both an extensive and regular calibration. This serves several goals: the measurement of several detector parameters, the validation of the simulation model and the constraint of systematic uncertainties on the reconstruction and particle identification algorithms. SNO+ faces stringent radiopurity requirements which, in turn, largely determine the materials selection, sealing and overall design of both the sources and deployment systems. In fact, to avoid frequent access to the inner volume of the detector, several permanent optical calibration systems have been developed and installed outside that volume. At the same time, the calibration source internal deployment system was re-designed as a fully sealed system, with more stringent material selection, but following the same working principle as the system used in SNO. This poster described the overall SNO+ calibration strategy, discussed the several new and innovative sources, both optical and radioactive, and covered the developments on source deployment systems.

  9. The KLOE Online Calibration System

    Institute of Scientific and Technical Information of China (English)

    E.Pasqualucci

    2001-01-01

    Based on all the features of the KLOE online software,the online calibration system performs current calibration quality checking in real time and starts automatically new calibration procedures when needed.Acalibration manager process controls the system,implementing the interface to the online system,receiving information from the run control and translating its state transitions to a separate state machine.It acts as a " calibration run controller"and performs failure recovery when requested by a set of process checkers.The core of the system is a multi-threaded OO histogram server that receives histogramming commands by remote processes and operates on local ROOT histograms.A client library and C,fortran and C++ application interface libraries allow the user to connect and define his own histogram or read histograms owned by others using an bool-like interface.Several calibration processes running in parallel in a destributed,multiplatform environment can fill the same histograms,allowing fast external information check.A monitor thread allow remote browsing for visual inspection,Pre-filtered data are read in nonprivileged spy mode from the data acquisition system via the Kloe Integrated Dataflow,privileged spy mode from the data acquisiton system via the Kole Integrated Dataflow.The main characteristics of the system are presented.

  10. Cross Calibration of TOMS, SBUV/2 and SCIAMACHY Radiances from Ground Observations

    Science.gov (United States)

    Hilsenrath, Ernest; Bhartia, P. K.; Bojkov, B.; Kowaleski, M.; Labow, G.; Ahmad, Z.

    2002-01-01

    We have shown that validation of radiances is a very effective means for correcting absolute accuracy and long term drifts of backscatter type satellite measurements. This method by-passes the algorithms used for both satellite and ground based measurements which are normally used to validate and correct the satellite data. A new method for satellite validation is planned which will compliment measurements from the existing ground-based networks. This method will employ very accurate comparisons between ground based zenith sky radiances and satellite nadir radiances. These comparisons will rely heavily on the experience derived from the Shuttle SBUV (SSBUV) program which provided a reference standard of radiance measurements for SBUV/2, TOMS, and GOME. This new measurement program, called 'Skyrad', employs two well established capabilities at the Goddard Space Flight Center, 1) the SSBUV calibration facilities and 2) the radiative transfer codes used for the TOMS and SBUV/2 algorithms and their subsequent refinements. Radiative transfer calculations show that ground based zenith sky and satellite nadir backscatter ultraviolet comparisons can be made very accurately under certain viewing conditions. The Skyrad instruments (SSBUV, Brewer spectrophotometers, and possibly others) will be calibrated and maintained to a precision of a few tenths of a percent. Skyrad data will then enable long term calibration of upcoming satellite instruments such as QuickTOMS, SBUV/2s and SCIAMACHY with a high degree of precision. This technique can be further employed to monitor the performance of future instruments such as GOMEZ, OMI, and OMPS. Additional information is included in the original extended abstract.

  11. Trends In Satellite Communication

    Science.gov (United States)

    Poley, William A.; Stevens, Grady H.; Stevenson, Steven M.; Lekan, Jack; Arth, Clifford H.; Hollansworth, James E.; Miller, Edward F.

    1988-01-01

    Report assesses trends in satellite communication from present to year 2010. Examines restrictions imposed by limited spectrum resource and technology needs created by trends. Personal communications, orbiting switchboards, and videophones foreseen.

  12. Domestic Communication Satellites

    Science.gov (United States)

    Horowitz, Andrew

    1974-01-01

    A discussion of the Federal Communications Commission's new policy on domestic satellites in light of our 1) military and economic history; 2) corporate interests; 3) citizen surveillance; and 4) media control. (HB)

  13. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  14. Biological satellite Kosmos-936

    Science.gov (United States)

    Vedeshin, L. A.

    1978-01-01

    A description is given of physiological experiments performed on the biological satellite Kosmos-936. Other experiments to determine the electrostatic and dielectric responses to the effects of cosmic radiation are discussed.

  15. Small Satellite Transporter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The primary objective is to determine whether this small satellite transporter is capable of transporting at least four 6U CubeSats is possible for a given set of...

  16. DFH-3 Satellite Platform

    Institute of Scientific and Technical Information of China (English)

    RenShufang

    2005-01-01

    The DFH-3 satellite platform is designed and developed by China Academy of Space Technology (CAST). It is a medium capability communications satellite platform. The platform adopts threeaxis attitude stabilization control system, having solar array output power of 1.7kW by the end of its design lifetime of 8 years. Its mass is 2100kg with payload capacity of 220kg.

  17. The Archimedes satellite system

    Science.gov (United States)

    Taylor, Stuart C.; Shurvinton, William D.

    1992-03-01

    Archimedes is a satellite system conceived by the European Space Agency (ESA) to effectively serve the European market for Mobile Radio Services (MRS). This paper describes the requirements and technical design of the Archimedes satellite system. The underlying assumptions and trade-offs behind the design are detailed and the design is compared and contrasted against alternative design solutions, both technically and economically. A path forward for the development of the system is indicated.

  18. ASTRID II satellit projekt

    DEFF Research Database (Denmark)

    Jørgensen, John Leif; Primdahl, Fritz

    1997-01-01

    The report describes the instruments developed for the Swedish micro satellite "ASTRID II". Specifications of the two instruments realized under this contract, a Stellar Compass and a CSC magnetometer are given follwed by a description of the project status and plan.......The report describes the instruments developed for the Swedish micro satellite "ASTRID II". Specifications of the two instruments realized under this contract, a Stellar Compass and a CSC magnetometer are given follwed by a description of the project status and plan....

  19. Hybrid Atom Electrostatic System for Satellite Geodesy

    Science.gov (United States)

    Zahzam, Nassim; Bidel, Yannick; Bresson, Alexandre; Huynh, Phuong-Anh; Liorzou, Françoise; Lebat, Vincent; Foulon, Bernard; Christophe, Bruno

    2017-04-01

    The subject of this poster comes within the framework of new concepts identification and development for future satellite gravity missions, in continuation of previously launched space missions CHAMP, GRACE, GOCE and ongoing and prospective studies like NGGM, GRACE 2 or E-GRASP. We were here more focused on the inertial sensors that complete the payload of such satellites. The clearly identified instruments for space accelerometry are based on the electrostatic technology developed for many years by ONERA and that offer a high level of performance and a high degree of maturity for space applications. On the other hand, a new generation of sensors based on cold atom interferometry (AI) is emerging and seems very promising in this context. These atomic instruments have already demonstrated on ground impressive results, especially with the development of state-of-the-art gravimeters, and should reach their full potential only in space, where the microgravity environment allows long interaction times. Each of these two types of instruments presents their own advantages which are, for the electrostatic sensors (ES), their demonstrated short term sensitivity and their high TRL, and for AI, amongst others, the absolute nature of the measurement and therefore no need for calibration processes. These two technologies seem in some aspects very complementary and a hybrid sensor bringing together all their assets could be the opportunity to take a big step in this context of gravity space missions. We present here the first experimental association on ground of an electrostatic accelerometer and an atomic accelerometer and underline the interest of calibrating the ES instrument with the AI. Some technical methods using the ES proof-mass as the Raman Mirror seem very promising to remove rotation effects of the satellite on the AI signal. We propose a roadmap to explore further in details and more rigorously this attractive hybridization scheme in order to assess its potential

  20. Prelaunch calibration of the HIRDLS instrument

    Science.gov (United States)

    Barnett, John J.; Darbyshire, A. G.; Hepplewhite, Christopher L.; Palmer, Christopher W.; Row, F.; Venters, P.; Watkins, R. E.; Whitney, John G.; Gille, John C.; Johnson, Brian R.

    1998-11-01

    The High Resolution Dynamics Limb Sounder (HIRDLS) instrument is being built jointly by the UK and USA, and is scheduled for launch on the NASA EOS Chem satellite in 2002. HIRDLS will measure the concentration of trace species and aerosol, and temperature and pressure variations in the Earth's atmosphere between about 8 and 100 km altitude. It is an infrared limb emission sounder, and a primary aim is that it should measure to much finder spatial resolution than has previously been achieved, with simultaneous 1 km vertical and 500 km horizontal resolutions, globally, every 12 hours. Achieving these objectives will depend upon very precise pre-launch calibration. This will be undertaken at Oxford University in a test laboratory that is currently being constructed specifically for the task. The instrument will be surrounded by cryogenically cooled walls, and mounted together with the test equipment on an optical table contained in a vacuum chamber. The table will be mounted independently of the chamber, on an inertial mass supported on pneumatic isolators. Test equipment is being manufactured to measure (1) the radiometric response (with an absolute accuracy equivalent to 70 mK) using full aperture black body targets, (2) the spectral response of each of the filter channels using a grating monochromator, (3) the spatial response of the instrument field of view, including low level out-of-field contributions, to 10 (mu) rad accuracy using a monochromator. The methods and equipment used are described together with the principal requirements.