Conducting Meta-Analysis Using SAS

CERN Document Server

Arthur, Winfried; Huffcutt, Allen I; Arthur, Winfred

2001-01-01

Conducting Meta-Analysis Using SAS reviews the meta-analysis statistical procedure and shows the reader how to conduct one using SAS. It presents and illustrates the use of the PROC MEANS procedure in SAS to perform the data computations called for by the two most commonly used meta-analytic procedures, the Hunter & Schmidt and Glassian approaches. This book serves as both an operational guide and user's manual by describing and explaining the meta-analysis procedures and then presenting the appropriate SAS program code for computing the pertinent statistics. The practical, step-by-step instru

Implementation of Surface Detector Option in SCALE SAS4 Shielding Module

International Nuclear Information System (INIS)

Broadhead, B.L.; Emmett, M.B.; Tang, J.S.

1999-01-01

The Shielding Analysis Sequence No. 4 (SAS4) in the Standardized Cask Analysis and Licensing Evaluation System (SCALE) is designed to aid the novice user in the preparation of detailed three-dimensional models and radiation protection studies of transportation or storage packages containing spent fuel from a nuclear reactor facility. The underlying methodology in these analyses is the Monte Carlo particle-tracking approach as incorporated into the MORSE-SGC computer code. The use of these basic procedures is enhanced via the automatic generation of the biasing parameters in the SAS4 sequence, which dramatically increases the calculational efficiency of most standard shielding problems. Until recently the primary mechanism for dose estimates in SAS4 was the use of point detectors, which were effective for single-dose locations, but inefficient for quantification of dose-rate profiles. This paper describes the implementation of a new surface detector option for SAS4 with automatic discretization of the detector surface into multiple segments or subdetectors. Results from several sample problems are given and discussed

SASWeave: Literate Programming Using SAS

Directory of Open Access Journals (Sweden)

Russell V. Lenth

2007-05-01

Full Text Available SASweave is a collection of scripts that allow one to embed SAS code into a LATEX document, and automatically incorporate the results as well. SASweave is patterned after Sweave, which does the same thing for code written in R. In fact, a document may contain both SAS and R code. Besides the convenience of being able to easily incorporate SAS examples in a document, SASweave facilitates the concept of “literate programming”: having code, documentation, and results packaged together. Among other things, this helps to ensure that the SAS output in the document is in concordance with the code.

SASWeave: Literate Programming Using SAS

DEFF Research Database (Denmark)

Lenth, Russell V; Højsgaard, Søren

2007-01-01

SASweave is a collection of scripts that allow one to embed SAS code into a LATEX document, and automatically incorporate the results as well. SASweave is patterned after Sweave, which does the same thing for code written in R. In fact, a document may contain both SAS and R code. Besides...... the convenience of being able to easily incorporate SAS examples in a document, SASweave facilitates the concept of "literate programming": having code, documentation, and results packaged together. Among other things, this helps to ensure that the SAS output in the document is in concordance with the code...

A SAS2H/KENO-V Methodology for 3D Full Core depletion analysis

International Nuclear Information System (INIS)

Milosevic, M.; Greenspan, E.; Vujic, J.; Petrovic, B.

2003-04-01

This paper describes the use of a SAS2H/KENO-V methodology for 3D full core depletion analysis and illustrates its capabilities by applying it to burnup analysis of the IRIS core benchmarks. This new SAS2H/KENO-V sequence combines a 3D Monte Carlo full core calculation of node power distribution and a 1D Wigner-Seitz equivalent cell transport method for independent depletion calculation of each of the nodes. This approach reduces by more than an order of magnitude the time required for getting comparable results using the MOCUP code system. The SAS2H/KENO-V results for the asymmetric IRIS core benchmark are in good agreement with the results of the ALPHA/PHOENIX/ANC code system. (author)

Effect of Patency File on Transportation and Curve Straightening in Canal Preparation with ProTaper System.

Science.gov (United States)

Hasheminia, Seyed Mohsen; Farhadi, Nastaran; Shokraneh, Ali

2013-01-01

The aim of this ex vivo study was to evaluate the effect of using a patency file on apical transportation and curve straightening during canal instrumentation with the ProTaper rotary system. Seventy permanent mandibular first molars with mesiobuccal canals, measuring 18-23 mm in length and with a 25-40° curvature (according to the Schneider method), were selected. The working lengths were determined and the teeth were mounted and divided into two experimental groups: (A) prepared by the ProTaper system without using a patency file (n = 35) and (B) prepared by the ProTaper system using a patency file (n = 35). Radiographs taken before and after the preparation were imported into Photoshop software and the apical transportation, and curve straightening were measured. Data were analyzed using independent t-test. Partial correlation analysis was performed to evaluate the relationship between the initial curvature, transportation, and curve straightening (α = 0.05). Using a patency file during canal preparation significantly decreased both apical transportation and curve straightening (P system.

49 CFR 564.5 - Information filing; agency processing of filings.

Science.gov (United States)

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Information filing; agency processing of filings... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REPLACEABLE LIGHT SOURCE INFORMATION (Eff. until 12-01-12) § 564.5 Information filing; agency processing of filings. (a) Each manufacturer...

Ordinance concerning the filing of transport of nuclear fuel materials

International Nuclear Information System (INIS)

1979-01-01

The ordinance is defined under the law for the regulations of nuclear source materials, nuclear fuel materials and reactors and the order for execution of the law. Any person who reports the transport of nuclear fuel materials shall file four copies of a notification according to the form attached to the public safety commission of the prefecture in charge of the dispatching place. When the transportation extends over the area in charge of another public safety commission, the commission which has received the notice shall report without delay date and route of the transport, kind and quantity of nuclear fuel materials and other necessary matters to the commission concerned and hear from the latter opinions on the items informed. The designation by the ordinance includes speed of the vehicle loaded with nuclear fuel materials, disposition of an accompanying car, arrangement of the line of the loaded vehicle and accompanying and other escorting cars, location of the parking, place of unloading and temporary storage, etc. Reports concerning troubles and measures taken shall be filed in ten days to the public safety commission which has received the notification, when accidents occur on the way, such as: theft or loss of nuclear fuel materials; traffic accident; irregular leaking of nuclear fuel materials and personal trouble by the transport. (Okada, K.)

Statistical data analysis using SAS intermediate statistical methods

CERN Document Server

Marasinghe, Mervyn G

2018-01-01

The aim of this textbook (previously titled SAS for Data Analytics) is to teach the use of SAS for statistical analysis of data for advanced undergraduate and graduate students in statistics, data science, and disciplines involving analyzing data. The book begins with an introduction beyond the basics of SAS, illustrated with non-trivial, real-world, worked examples. It proceeds to SAS programming and applications, SAS graphics, statistical analysis of regression models, analysis of variance models, analysis of variance with random and mixed effects models, and then takes the discussion beyond regression and analysis of variance to conclude. Pedagogically, the authors introduce theory and methodological basis topic by topic, present a problem as an application, followed by a SAS analysis of the data provided and a discussion of results. The text focuses on applied statistical problems and methods. Key features include: end of chapter exercises, downloadable SAS code and data sets, and advanced material suitab...

Sas2

International Development Research Centre (IDRC) Digital Library (Canada)

The fascinating multi-country examples in the Guide illustrate how SAS2 ... The challenge is to raise all forms of inquiry to the power of two: making the .... This requires an ability to suspend judgment, consider the views of others, ..... Our view is that the drive to think "holistically" must always be expressed with local color and ...

Extending and Enhancing SAS (Static Analysis Suite)

CERN Document Server

Ho, David

2016-01-01

The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

Homework Solutions S.A.S.

OpenAIRE

Acero Mora, Mariluz; Hernández Laguna, Liliana

2012-01-01

Homework Solutions S.A.S, será una empresa de servicios dedicada a brindar asesorías de tareas y trabajos bilingües con soluciones al instante sin que los padres de familia tengan que pagar por meses o semestres. Está previsto que dicha empresa empiece operaciones en el mes de Enero de 2013. Homework Solutions S.A.S, trabajará a domicilio, en los colegios que requieran sus servicios y en su sede principal ubicada al norte de la ciudad de Bogotá.

76 FR 74060 - Notice of Agreements Filed

Science.gov (United States)

2011-11-30

... Maritime Corporation; Delmas SAS; Evergreen Marine Corporation (Taiwan), Ltd.; Hamburg-S[uuml]d KG; Hapag...) Ltd. and Agriculture Investment Export, Inc. Filing Party: Wade S. Hooker, Esquire, 21 Central Park W... Agriculture Investment in the trade between U.S. Atlantic and Gulf ports and ports in Guatemala and Honduras...

Particle and particle systems characterization small-angle scattering (SAS) applications

CERN Document Server

Gille, Wilfried

2016-01-01

Small-angle scattering (SAS) is the premier technique for the characterization of disordered nanoscale particle ensembles. SAS is produced by the particle as a whole and does not depend in any way on the internal crystal structure of the particle. Since the first applications of X-ray scattering in the 1930s, SAS has developed into a standard method in the field of materials science. SAS is a non-destructive method and can be directly applied for solid and liquid samples. Particle and Particle Systems Characterization: Small-Angle Scattering (SAS) Applications is geared to any scientist who might want to apply SAS to study tightly packed particle ensembles using elements of stochastic geometry. After completing the book, the reader should be able to demonstrate detailed knowledge of the application of SAS for the characterization of physical and chemical materials.

A SAS IML Macro for Loglinear Smoothing

Science.gov (United States)

Moses, Tim; von Davier, Alina

2011-01-01

Polynomial loglinear models for one-, two-, and higher-way contingency tables have important applications to measurement and assessment. They are essentially regarded as a smoothing technique, which is commonly referred to as loglinear smoothing. A SAS IML (SAS Institute, 2002a) macro was created to implement loglinear smoothing according to…

Regression modeling methods, theory, and computation with SAS

CERN Document Server

Panik, Michael

2009-01-01

Regression Modeling: Methods, Theory, and Computation with SAS provides an introduction to a diverse assortment of regression techniques using SAS to solve a wide variety of regression problems. The author fully documents the SAS programs and thoroughly explains the output produced by the programs.The text presents the popular ordinary least squares (OLS) approach before introducing many alternative regression methods. It covers nonparametric regression, logistic regression (including Poisson regression), Bayesian regression, robust regression, fuzzy regression, random coefficients regression,

Tabulation of Fundamental Assembly Heat and Radiation Source Files

International Nuclear Information System (INIS)

T. deBues; J.C. Ryman

2006-01-01

The purpose of this calculation is to tabulate a set of computer files for use as input to the WPLOAD thermal loading software. These files contain details regarding heat and radiation from pressurized water reactor (PWR) assemblies and boiling water reactor (BWR) assemblies. The scope of this calculation is limited to rearranging and reducing the existing file information into a more streamlined set of tables for use as input to WPLOAD. The electronic source term files used as input to this calculation were generated from the output files of the SAS2H/ORIGIN-S sequence of the SCALE Version 4.3 modular code system, as documented in References 2.1.1 and 2.1.2, and are included in Attachment II

An in vitro comparison of root canal transportation by reciproc file with and without glide path.

Science.gov (United States)

Nazarimoghadam, Kiumars; Daryaeian, Mohammad; Ramazani, Nahid

2014-09-01

The aim of ideal canal preparation is to prevent iatrogenic aberrations such as transportation. The aim of this study was to evaluate the root canal transportation by Reciproc file with and without glide path. Thirty acrylic-resin blocks with a curvature of 60° and size#10 (2% taper) were assigned into two groups (n= 15). In group 1, the glide path was performed using stainless steel k-files size#10 and 15 at working length In group 2, canals were prepared with Reciproc file system at working length. By using digital imaging software (AutoCAD 2008), the pre-instrumentation and post-instrumentation digital images were superimposed over, taking the landmarks as reference points. Then the radius of the internal and external curve of the specimens was calculated at three α, β and γ points (1mm to apex as α, 3mm to apex as β, and 5mm to apex as γ). The data were statically analyzed using the independent T-test and Mann-Whitney U test by SPSS version 16. Glide path was found significant for only external curve in the apical third of the canal; that is, 5mm to apex (P=0.005). But in the other third, canal modification was not significant (P> 0.008). Canal transportation in the apical third of the canal seems to be significantly reduced when glide path is performed using reciprocating files.

Validity of Simpson-Angus Scale (SAS) in a naturalistic schizophrenia population.

Science.gov (United States)

Janno, Sven; Holi, Matti M; Tuisku, Katinka; Wahlbeck, Kristian

2005-03-17

Simpson-Angus Scale (SAS) is an established instrument for neuroleptic-induced parkinsonism (NIP), but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry). Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's alpha, convergence to actometry and the capacity for NIP case detection were assessed. Cronbach's alpha for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

Validity of Simpson-Angus Scale (SAS in a naturalistic schizophrenia population

Directory of Open Access Journals (Sweden)

Tuisku Katinka

2005-03-01

Full Text Available Abstract Background Simpson-Angus Scale (SAS is an established instrument for neuroleptic-induced parkinsonism (NIP, but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry. Methods Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's α, convergence to actometry and the capacity for NIP case detection were assessed. Results Cronbach's α for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. Conclusion We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

SAS3DC - A computer program to describe accidents in LMFBRs

International Nuclear Information System (INIS)

Angerer, G.; Arnecke, G.; Polch, A.

1981-02-01

The code system SAS3D - developed in the ANL - is at present the most adequate instrument for simulating accidents in the LMFBRs. SAS3DC is an improved version of this code system: the routine CLAZAS - modelling in SAS3D the motion of the fuel cladding - is replaced in the SAS3DC by the routine CMOT. CMOT describes the moving material not in the Lagrangian - as CLAZAS - but in the Eulerian system and is so able to register even small cladding-displacements. To complete the description of the SAS3DC-code the results of some sample problems are included. (orig.) [de

[Standardization of the Greek version of Zung's Self-rating Anxiety Scale (SAS)].

Science.gov (United States)

Samakouri, M; Bouhos, G; Kadoglou, M; Giantzelidou, A; Tsolaki, K; Livaditis, M

2012-01-01

Self-rating Anxiety Scale (SAS), introduced by Zung, has been widely used in research and in clinical practice for the detection of anxiety. The present study aims at standardizing the Greek version of SAS. SAS consists of 20 items rated on a 1-4 likert type scale. The total SAS score may vary from 20 (no anxiety at all) to 80 (severe anxiety). Two hundred and fifty four participants (114 male and 140 female), psychiatric patients, physically ill and general population individuals, aged 45.40±11.35 years, completed the following: (a) a demographic characteristics' questionnaire, (b) the SAS Greek version, (c) the Spielberg's Modified Greek State-Trait Anxiety Scale (STAI-Gr.-X) and (d) the Zung Depression Rating Scale (ZDRS). Seventy six participants answered the SAS twice within a 12th-day median period of time. The following parameters were calculated: (a) internal consistency of the SAS in terms of Cronbach's α co-efficient, (b) its test-retest reliability in terms of the Intraclass Correlation Coefficient (ICC) and (c) its concurrent and convergent validities through its score's Spearman's rho correlations with both the state and trait subscales of STAI-Gr X and the ZDRS. In addition, in order to evaluate SAS' discriminant validity, the scale's scores of the three groups of participants (psychiatric patients, physically ill and general population individuals) were compared among each other, in terms of Kruskall Wallis and Mann Whitney U tests. SAS Cronbach's alpha equals 0.897 while ICC regarding its test-retest reliability equals 0.913. Spearman's rho concerning validity: (a) when SAS is compared to STAI-Gr.-X (state), equals it 0.767, (b) when SAS is compared to STAI-Gr. X (trait), it equals 0.802 and (c) when SAS is compared to ZDRS, it equals 0.835. The mentally ill scored significantly higher in SAS compared to both the healthy and the general population. In conclusion, the SAS Greek version presents very satisfactory psychometric properties regarding

Coupled MCNP - SAS-SFR calculations for sodium fast reactor core at steady-state - 15460

International Nuclear Information System (INIS)

Ponomarev, A.; Travleev, A.; Pfrang, W.; Sanchez, V.

2015-01-01

The prediction of core parameters at steady state is the first step when studying core accident transient behaviour. At this step thermal hydraulics (TH) and core geometry parameters are calculated corresponding to initial operating conditions. In this study we present the coupling of the SAS-SFR code to the Monte-Carlo neutron transport code MCNP at steady state together with application to the European Sodium Fast Reactor (ESFR). The SAS-SFR code employs a multi-channel core representation where each channel represents subassemblies with similar power, thermal-hydraulics and pin mechanics conditions. For every axial node of every channel the individual geometry and material compositions parameters are calculated in accord with power and cooling conditions. This requires supplying the SAS-SFR-code with nodal power values which should be calculated by neutron physics code with given realistic core parameters. In the conventional approach the neutron physics model employs some core averaged TH and geometry data (fuel temperature, coolant density, core axial and radial expansion). In this study we organize a new approach coupling the MCNP neutron physics models and the SAS-SFR models, so that calculations of power can be improved by using distributed core parameters (TH and geometry) taken from SAS-SFR. The MCNP code is capable to describe cores with distributed TH parameters and even to model non-uniform axial expansion of fuel subassemblies. In this way, core TH and geometrical data calculated by SAS-SFR are taken into account accurately in the neutronics model. The coupling implementation is done by data exchange between two codes with help of processing routines managed by driver routine. Currently it is model-specific and realized for the ESFR 'Reference Oxide' core. The Beginning-Of-Life core state is considered with 10 channel representation for fuel subassemblies. For this model several sets of coupled calculations are performed, in which different

SAS and R data management, statistical analysis, and graphics

CERN Document Server

Kleinman, Ken

2009-01-01

An All-in-One Resource for Using SAS and R to Carry out Common TasksProvides a path between languages that is easier than reading complete documentationSAS and R: Data Management, Statistical Analysis, and Graphics presents an easy way to learn how to perform an analytical task in both SAS and R, without having to navigate through the extensive, idiosyncratic, and sometimes unwieldy software documentation. The book covers many common tasks, such as data management, descriptive summaries, inferential procedures, regression analysis, and the creation of graphics, along with more complex applicat

Mirror suspension system for the TAMA SAS

CERN Document Server

Takamori, A; Bertolini, A; Cella, G; DeSalvo, R; Fukushima, M; Iida, Y; Jacquier, F; Kawamura, S; Marka, S; Nishi, Y; Numata, K; Sannibale, V; Somiya, K; Takahashi, R; Tariq, H; Tsubono, K; Ugas, J; Viboud, N; Yamamoto, H; Yoda, T; Wang Chen Yang

2002-01-01

Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SU...

Apical Transportation, Centering Ability, and Cleaning Effectiveness of Reciprocating Single-file System Associated with Different Glide Path Techniques.

Science.gov (United States)

de Carvalho, Guilherme Moreira; Sponchiado Junior, Emílio Carlos; Garrido, Angela Delfina Bittencourt; Lia, Raphael Carlos Comelli; Garcia, Lucas da Fonseca Roberti; Marques, André Augusto Franco

2015-12-01

The aim of this study was to evaluate the apical transportation, the centering ability, and the cleaning effectiveness of a reciprocating single-file system associated to different glide path techniques. The mesial root canals of 52 mandibular molars were randomly distributed into 4 groups (n = 13) according to the different glide path techniques used before biomechanical preparation with Reciproc System (RS): KF/RS (sizes 10 and 15 K-files), NGP/RS (no glide path, only reciprocating system), PF/RS (sizes 13, 16, and 19 PathFile instruments), and NP (no preparation). Cone-beam computed tomography analysis was performed before and after instrumentation for apical third images acquisition. Apical transportation and its direction were evaluated by using the formula D = (X1 - X2) - (Y1 - Y2), and the centering ability was analyzed by the formula CC = (X1 - X2/Y1 - Y2 or Y1 - Y2/X1 - X2). The samples were submitted to histologic processing and analyzed under a digital microscope for debris quantification. The values were statistically analyzed (Kruskal-Wallis, the Dunn multiple comparisons test, P .05). Groups had a tendency toward transportation in the mesial direction. No technique had perfect centering ability (=1.0), with no significant difference among them. KF/RS had larger amount of debris, with statistically significant difference in comparison with NGP/RS (P > .05). The different glide path techniques promoted minimal apical transportation, and the reciprocating single-file system tested remained relatively centralized within the root canal. Also, the different techniques interfered in the cleaning effectiveness of the reciprocating system. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Surface anatomy scanning (SAS) in intracranial tumours: comparison with surgical findings

International Nuclear Information System (INIS)

Sumida, M.; Uozumi, T.; Kiya, K.; Arita, K.; Kurisu, K.; Onda, J.; Satoh, H.; Ikawa, F.; Yukawa, O.; Migita, K.; Hada, H.; Katada, K.

1995-01-01

We evaluated the usefulness of surface anatomy scanning (SAS) in intracranial tumours, comparing it with surgical findings. We examined 31 patients with brain tumours preoperatively. The tumours included 16 meningiomas, 8 gliomas, 4 metastases and 3 others. SAS clearly demonstrated the tumours, allowing them to be distinguished from the structures of the brain surface, including oedema, except in cases of metastasis. SAS clearly demonstrated large cortical veins. SAS is useful for three-dimensional delineation of the brain surface before surgery. (orig.)

Adaptive beamforming for low frequency SAS imagery and bathymetry

NARCIS (Netherlands)

Hayes, M.P.; Hunter, A.J.

2012-01-01

Synthetic aperture side-scan sonar (SAS) is a mature technology for high-resolution sea floor imaging [1]. Interferometric synthetic aperture sonars (InSAS) use additional hydrophones in a vertical array for bathymetric mapping [2]. This has created high-resolution bathymetry in deep water

Modelling the detachment dependence on strike point location in the small angle slot divertor (SAS) with SOLPS

Science.gov (United States)

Casali, Livia; Covele, Brent; Guo, Houyang

2017-10-01

The new Small Angle Slot (SAS) divertor in DIII-D is characterized by a shallow-angle target enclosed by a slot structure about the strike point (SP). SOLPS modelling results of SAS have demonstrated divertor closure's utility in widening the range of acceptable densities for adequate heat handling. An extensive database of runs has been built to study the detachment dependence on SP location in SAS. Density scans show that lower Te at lower upstream density occur when the SP is at the critical location in the slot. The cooling front spreads across the entire target at higher densities, in agreement with experimental Langmuir probe measurements. A localized increase of the atomic and molecular density takes place near the SP, which reduces the target incident power density and facilitates detachment at lower upstream density. Systematic scans of variables such as power, transport, and viscosity have been carried out to assess the detachment sensitivity. Therein, a positive role of the viscosity is found. This work supported by DOE Contract Number DE-FC02-04ER54698.

First report of sasX-positive methicillin-resistant Staphylococcus aureus in Japan.

Science.gov (United States)

Nakaminami, Hidemasa; Ito, Teruyo; Han, Xiao; Ito, Ayumu; Matsuo, Miki; Uehara, Yuki; Baba, Tadashi; Hiramatsu, Keiichi; Noguchi, Norihisa

2017-09-01

SasX is a known virulence factor of Staphylococcus aureus involved in colonisation and immune evasion of the bacterium. The sasX gene, which is located on the ϕSPβ prophage, is frequently found in the sequence type (ST) 239 S. aureus lineage, which is the predominant healthcare-associated clone in Asian countries. In Japan, ST239 clones have rarely been identified, and sasX-positive strains have not been reported to date. Here, we report the first identification of 18 sasX-positive methicillin-resistant S. aureus (MRSA) strains in Japanese hospitals between 2009 and 2011. All sasX-positive isolates belonged to an ST239-staphylococcal cassette chromosome mec type III (ST239-III) lineage. However, we were unable to identify additional sasX-positive MRSA strains from 2012 to 2016, indicating that the small epidemic of sasX-positive isolates observed in this study was temporary. The sequence surrounding sasX in the strain TOHH628 lacked 51 genes that encode phage packaging and structural proteins, and no bacteriophage was induced by mitomycin C. Additionally, in the TOHH628 strain, the region (64.6 kb) containing sasX showed high identity to the ϕSPβ-like element (71.3 kb) of the Taiwanese MRSA strain Z172. The data strongly suggest that the present sasX-positive isolates found in Japanese hospitals were transmitted incidentally from other countries. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Development and validation of a smartphone addiction scale (SAS.

Directory of Open Access Journals (Sweden)

Min Kwon

Full Text Available OBJECTIVE: The aim of this study was to develop a self-diagnostic scale that could distinguish smartphone addicts based on the Korean self-diagnostic program for Internet addiction (K-scale and the smartphone's own features. In addition, the reliability and validity of the smartphone addiction scale (SAS was demonstrated. METHODS: A total of 197 participants were selected from Nov. 2011 to Jan. 2012 to accomplish a set of questionnaires, including SAS, K-scale, modified Kimberly Young Internet addiction test (Y-scale, visual analogue scale (VAS, and substance dependence and abuse diagnosis of DSM-IV. There were 64 males and 133 females, with ages ranging from 18 to 53 years (M = 26.06; SD = 5.96. Factor analysis, internal-consistency test, t-test, ANOVA, and correlation analysis were conducted to verify the reliability and validity of SAS. RESULTS: Based on the factor analysis results, the subscale "disturbance of reality testing" was removed, and six factors were left. The internal consistency and concurrent validity of SAS were verified (Cronbach's alpha = 0.967. SAS and its subscales were significantly correlated with K-scale and Y-scale. The VAS of each factor also showed a significant correlation with each subscale. In addition, differences were found in the job (p<0.05, education (p<0.05, and self-reported smartphone addiction scores (p<0.001 in SAS. CONCLUSIONS: This study developed the first scale of the smartphone addiction aspect of the diagnostic manual. This scale was proven to be relatively reliable and valid.

Hotelli Radisson SAS mantra : jah, ma saan! / Kai Vare

Index Scriptorium Estoniae

Vare, Kai, 1968-

2004-01-01

Radisson SAS hotell Tallinnas on kliendirahulolu-uuringute järgi keti hotellide seas esimeste hulgas. Hotelli direktor Kaido Ojaperv ja müügijuht Ann-Kai Tõrs Radisson SAS-i standarditest, kliendi sajaprotsendilise rahulolu tagamise põhimõtetest, personali valikust, koolitusest. Kommenteerib Sandra Dimitrovich

SAS validation and analysis of in-pile TUCOP experiments

International Nuclear Information System (INIS)

Morman, J.A.; Tentner, A.M.; Dever, D.J.

1985-01-01

The validation of the SAS4A accident analysis code centers on its capability to calculate the wide range of tests performed in the TREAT (Transient Reactor Test Facility) in-pile experiments program. This paper presents the SAS4A analysis of a simulated TUCOP (Transient-Under-Cooled-Over-Power) experiment using seven full-length PFR mixed oxide fuel pins in a flowing sodium loop. Calculations agree well with measured thermal-hydraulic, pin failure time and post-failure fuel motion data. The extent of the agreement confirms the validity of the models used in the SAS4A code to describe TUCOP accidents

A SAS2H/KENO-V methodology for 3D fuel burnup analysis

International Nuclear Information System (INIS)

Milosevic, M.; Greenspan, E.; Vujic, J.

2002-01-01

An efficient methodology for 3D fuel burnup analysis of LWR reactors is described in this paper. This methodology is founded on coupling Monte Carlo method for 3D calculation of node power distribution, and transport method for depletion calculation in ID Wigner-Seitz equivalent cell for each node independently. The proposed fuel burnup modeling, based on application of SCALE-4.4a control modules SAS2H and KENO-V.a is verified for the case of 2D x-y model of IRIS 15 x 15 fuel assembly (with reflective boundary condition) by using two well benchmarked code systems. The one is MOCUP, a coupled MCNP-4C and ORIGEN2.1 utility code, and the second is KENO-V.a/ORIGEN2.1 code system recently developed by authors of this paper. The proposed SAS2H/KENO-V.a methodology was applied for 3D burnup analysis of IRIS-1000 benchmark.44 core. Detailed k sub e sub f sub f and power density evolution with burnup are reported. (author)

Structures of SAS-6 suggest its organization in centrioles.

Science.gov (United States)

van Breugel, Mark; Hirono, Masafumi; Andreeva, Antonina; Yanagisawa, Haru-aki; Yamaguchi, Shoko; Nakazawa, Yuki; Morgner, Nina; Petrovich, Miriana; Ebong, Ima-Obong; Robinson, Carol V; Johnson, Christopher M; Veprintsev, Dmitry; Zuber, Benoît

2011-03-04

Centrioles are cylindrical, ninefold symmetrical structures with peripheral triplet microtubules strictly required to template cilia and flagella. The highly conserved protein SAS-6 constitutes the center of the cartwheel assembly that scaffolds centrioles early in their biogenesis. We determined the x-ray structure of the amino-terminal domain of SAS-6 from zebrafish, and we show that recombinant SAS-6 self-associates in vitro into assemblies that resemble cartwheel centers. Point mutations are consistent with the notion that centriole formation in vivo depends on the interactions that define the self-assemblies observed here. Thus, these interactions are probably essential to the structural organization of cartwheel centers.

Development and validation of a smartphone addiction scale (SAS).

Science.gov (United States)

Kwon, Min; Lee, Joon-Yeop; Won, Wang-Youn; Park, Jae-Woo; Min, Jung-Ah; Hahn, Changtae; Gu, Xinyu; Choi, Ji-Hye; Kim, Dai-Jin

2013-01-01

The aim of this study was to develop a self-diagnostic scale that could distinguish smartphone addicts based on the Korean self-diagnostic program for Internet addiction (K-scale) and the smartphone's own features. In addition, the reliability and validity of the smartphone addiction scale (SAS) was demonstrated. A total of 197 participants were selected from Nov. 2011 to Jan. 2012 to accomplish a set of questionnaires, including SAS, K-scale, modified Kimberly Young Internet addiction test (Y-scale), visual analogue scale (VAS), and substance dependence and abuse diagnosis of DSM-IV. There were 64 males and 133 females, with ages ranging from 18 to 53 years (M = 26.06; SD = 5.96). Factor analysis, internal-consistency test, t-test, ANOVA, and correlation analysis were conducted to verify the reliability and validity of SAS. Based on the factor analysis results, the subscale "disturbance of reality testing" was removed, and six factors were left. The internal consistency and concurrent validity of SAS were verified (Cronbach's alpha = 0.967). SAS and its subscales were significantly correlated with K-scale and Y-scale. The VAS of each factor also showed a significant correlation with each subscale. In addition, differences were found in the job (psmartphone addiction scores (psmartphone addiction aspect of the diagnostic manual. This scale was proven to be relatively reliable and valid.

Napojení .NET / Java technologie na SAS BI

OpenAIRE

Jandák, Miroslav

2009-01-01

This thesis is focused on SAS Enterprise Intelligence Platform product and it's capabilities to integrate within a Business Intelligence solution. The aim of the thesis is to describe integration technolgies that the platform features, as well as to determine their application field and compare them, eventually add usage examples. The first part of the thesis explains the general concept and architecture of Business Intelligence, afterwards the reader gets familiar with the SAS Enterprise Int...

Statistical hypothesis testing with SAS and R

CERN Document Server

Taeger, Dirk

2014-01-01

A comprehensive guide to statistical hypothesis testing with examples in SAS and R When analyzing datasets the following questions often arise:Is there a short hand procedure for a statistical test available in SAS or R?If so, how do I use it?If not, how do I program the test myself? This book answers these questions and provides an overview of the most commonstatistical test problems in a comprehensive way, making it easy to find and performan appropriate statistical test. A general summary of statistical test theory is presented, along with a basicdescription for each test, including the

In vitro comparison rate of dental root canal transportation using two single file systems on the simulated resin blocks

Directory of Open Access Journals (Sweden)

Mohammad Javad Etesami

2016-07-01

Full Text Available Background and Aims: Cleaning and shaping is one of the most important stages in endodontic treatment. Single-file systems save time and reduce the risk of transmission of pathogens. This in vitro study was aimed to compare the rate of canal transportation after the preparation of the stimulated resin root canal with two single-file systems, namely Waveone and Reciproc. Materials and Methods: Thirty stimulated resin root canal blocks with size 8/0. 02 K file were randomly divided into two study groups. The preparation in Group A and Group B was performed using Reciproc and Waveone files, respectively. Pre and post- preparation photographs were taken and the images were superimposed to evaluate the inner and outer wall’s curvature tendency at three points (apical, middle and coronal using AutoCad pragram. Data were analyzed using T-test. Results: Based on the results, the degree of transportation in the inner and outer walls of the canal was less at the level of 3 millimeters (P0.05. Conclusion: Waveone showed better performance in the middle third of canal and this system maybe recommended.

Mirror suspension system for the TAMA SAS

International Nuclear Information System (INIS)

Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Marka, Szabolcs; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Yamamoto, Hiroaki; Yoda, Tatsuo; Wang Chenyang

2002-01-01

Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SUS is equipped with a totally passive magnetic damper to suppress internal resonances without degrading the thermal noise performance. In this paper we discuss the SUS details and present prototype results

A new cavity model for SAS4A

International Nuclear Information System (INIS)

Moxon, D.; Camous, F.

1994-01-01

The SAS4 code is the fourth generation of the SAS series developed at the ANL to study the initiating phase of hypothetical core disruptive accidents in LMFBRs. It was made available to the CEA in order to obtain more validation studies and model developments. The new cavity model described and incorporated in the code was first developed as a stand-alone code. It was thoroughly tested numerically and found to be quick and stable. Tis paper describes only the physical phenomena taken into account

SAS-macros for estimation and prediction in an model of the electricity consumption

DEFF Research Database (Denmark)

1998-01-01

SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup.......SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup....

Fitting polytomous Rasch models in SAS

DEFF Research Database (Denmark)

Christensen, Karl Bang

2006-01-01

The item parameters of a polytomous Rasch model can be estimated using marginal and conditional approaches. This paper describes how this can be done in SAS (V8.2) for three item parameter estimation procedures: marginal maximum likelihood estimation, conditional maximum likelihood estimation, an...

Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

Index Scriptorium Estoniae

Schults, Olev

2008-01-01

Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

Nyheder i SAS Analytics 14.2

DEFF Research Database (Denmark)

Milhøj, Anders

2017-01-01

I november 2016 blev Analytical Produts i den opdaterede version 14.2 sendt på markedet. Denne opdatering indeholder opdateringer af de analytiske programpakker inden for statistik, økonometri, operationsanalyse etc. Disse opdateringer er nu løsrevet fra samtidige opdateringer af det samlede SAS-program...

Melnās krāsas iespējas interjerā

OpenAIRE

Lapkovska, Ērika

2016-01-01

Diplomdarbā “Melnās krāsas iespējas interjerā”, analizējot pieejamo literatūru, tiek apskatīta melnās krāsas izpratne, nozīme un lietojums vēsturiskā skatījumā, kā arī melnās krāsas izmantojuma principi interjerā. Empīriskajā daļā tiek veikts salīdzinošais pētījums, analizējot dažādus kafejnīcu un bāru interjerus Latvijā un pasaulē, kuros ir melnās krāsas klātbūtne. Diplomdarba apjoms – 75 lpp., kurās iekļauts ievads, 4 nodaļas, 7 apakšnodaļas, literatūras saraksts ar 53 vienībām, 2 pielikum...

Impact of manure-related DOM on sulfonamide transport in arable soils

Science.gov (United States)

Zhou, Dan; Thiele-Bruhn, Sören; Arenz-Leufen, Martina Gesine; Jacques, Diederik; Lichtner, Peter; Engelhardt, Irina

2016-09-01

Field application of livestock manure introduces colloids and veterinary antibiotics, e.g. sulfonamides (SAs), into farmland. The presence of manure colloids may potentially intensify the SAs-pollution to soils and groundwater by colloid-facilitated transport. Transport of three SAs, sulfadiazine (SDZ), sulfamethoxypyridazine (SMPD), and sulfamoxole (SMOX), was investigated in saturated soil columns with and without manure colloids from sows and farrows, weaners, and fattening pigs. Experimental results showed that colloid-facilitated transport of SMOX was significant in the presence of manure colloids from fattening pigs with low C/N ratio, high SUVA280 nm and protein C, while manure colloids from sows and farrows and weaners had little effect on SMOX transport. In contrast, only retardation was observed for SDZ and SMPD when manure colloids were present. Breakthrough curves (BTCs) of colloids and SAs were replicated well by a newly developed numerical model that considers colloid-filtration theory, competitive kinetic sorption, and co-transport processes. Model results demonstrate that mobile colloids act as carriers for SMOX, while immobile colloids block SMOX from sorbing onto the soil. The low affinity of SMOX to sorb on immobile colloids prevents aggregation and also promotes SMOX's colloid-facilitated transport. Conversely, the high affinity of SDZ and SMPD to sorb on all types of immobile colloids retarded their transport. Thus, manure properties play a fundamental role in increasing the leaching risk of hydrophobic sulfonamides.

Cone-beam Computed Tomographic Assessment of Canal Centering Ability and Transportation after Preparation with Twisted File and Bio RaCe Instrumentation.

Directory of Open Access Journals (Sweden)

Kiamars Honardar

2014-08-01

Full Text Available Use of rotary Nickel-Titanium (NiTi instruments for endodontic preparation has introduced a new era in endodontic practice, but this issue has undergone dramatic modifications in order to achieve improved shaping abilities. Cone-beam computed tomography (CBCT has made it possible to accurately evaluate geometrical changes following canal preparation. This study was carried out to compare canal centering ability and transportation of Twisted File and BioRaCe rotary systems by means of cone-beam computed tomography.Thirty root canals from freshly extracted mandibular and maxillary teeth were selected. Teeth were mounted and scanned before and after preparation by CBCT at different apical levels. Specimens were divided into 2 groups of 15. In the first group Twisted File and in the second, BioRaCe was used for canal preparation. Canal transportation and centering ability after preparation were assessed by NNT Viewer and Photoshop CS4 software. Statistical analysis was performed using t-test and two-way ANOVA.All samples showed deviations from the original axes of the canals. No significant differences were detected between the two rotary NiTi instruments for canal centering ability in all sections. Regarding canal transportation however, a significant difference was seen in the BioRaCe group at 7.5mm from the apex.Under the conditions of this in vitro study, Twisted File and BioRaCe rotary NiTi files retained original canal geometry.

Combination of functional MRI with SAS and MRA

Energy Technology Data Exchange (ETDEWEB)

Sumida, Masayuki; Takeshita, Shinichirou; Kutsuna, Munenori; Akimitsu, Tomohide; Arita, Kazunori; Kurisu, Kaoru [Hiroshima Univ. (Japan). School of Medicine

1999-02-01

For presurgical diagnosis of brain surface, combination of functional MRI (fMRI) with the MR angiography was examined. This method could visualize brain bay, convolution and vein as index of surface. Five normal adults (male, mean age: 28-year-old) and 7 patients with brain tumor on the main locus to surface (male: 4, female: 3, mean age: 52.3-year-old) were studied. fMRI was performed by SPGR method (TR 70, TE 40, flip angle 60, one slice, thickness 10 mm, FOV 20 cm, matrix 128 x 128). The brain surface was visualized by SAS (surface anatomy scanning). SAS was performed by FSE method (TR 6000, TE 200, echo train 16, thickness 20 mm, slice 3, NEX 2). Cortical veins near superior sagittal sinus were visualized by MRA with 2D-TOF method (TR 50, TE 20, flip angle 60, thickness 2 mm, slice 28, NEX 1). These images were superimposed and functional image of peripheral sensorimotor region was evaluated anatomically. In normal adults, high signal was visualized at another side of near sensorimotor region at 8 of 10 sides. All high signal area of fMRI agreed with cortical vein near sensorimotor region that was visualized by MRA. In patients with brain tumor, signal was visualized at another side of sensorimotor region of tumor without 2 cases with palsy. In another side of tumor, signal of fMRI was visualized in 5 of 7 cases. The tumor was visualized as opposite low signal field in SAS. Locational relation between tumor and brain surface and brain function was visualized distinctly by combination of MRA, SAS and MRA. This method could become useful for presurgical diagnosis. (K.H.)

SAS-6 engineering reveals interdependence between cartwheel and microtubules in determining centriole architecture.

Science.gov (United States)

Hilbert, Manuel; Noga, Akira; Frey, Daniel; Hamel, Virginie; Guichard, Paul; Kraatz, Sebastian H W; Pfreundschuh, Moritz; Hosner, Sarah; Flückiger, Isabelle; Jaussi, Rolf; Wieser, Mara M; Thieltges, Katherine M; Deupi, Xavier; Müller, Daniel J; Kammerer, Richard A; Gönczy, Pierre; Hirono, Masafumi; Steinmetz, Michel O

2016-04-01

Centrioles are critical for the formation of centrosomes, cilia and flagella in eukaryotes. They are thought to assemble around a nine-fold symmetric cartwheel structure established by SAS-6 proteins. Here, we have engineered Chlamydomonas reinhardtii SAS-6-based oligomers with symmetries ranging from five- to ten-fold. Expression of a SAS-6 mutant that forms six-fold symmetric cartwheel structures in vitro resulted in cartwheels and centrioles with eight- or nine-fold symmetries in vivo. In combination with Bld10 mutants that weaken cartwheel-microtubule interactions, this SAS-6 mutant produced six- to eight-fold symmetric cartwheels. Concurrently, the microtubule wall maintained eight- and nine-fold symmetries. Expressing SAS-6 with analogous mutations in human cells resulted in nine-fold symmetric centrioles that exhibited impaired length and organization. Together, our data suggest that the self-assembly properties of SAS-6 instruct cartwheel symmetry, and lead us to propose a model in which the cartwheel and the microtubule wall assemble in an interdependent manner to establish the native architecture of centrioles.

Sas-4 proteins are required during basal body duplication in Paramecium

Science.gov (United States)

Gogendeau, Delphine; Hurbain, Ilse; Raposo, Graca; Cohen, Jean; Koll, France; Basto, Renata

2011-01-01

Centrioles and basal bodies are structurally related organelles composed of nine microtubule (MT) triplets. Studies performed in Caenorhabditis elegans embryos have shown that centriole duplication takes place in sequential way, in which different proteins are recruited in a specific order to assemble a procentriole. ZYG-1 initiates centriole duplication by triggering the recruitment of a complex of SAS-5 and SAS-6, which then recruits the final player, SAS-4, to allow the incorporation of MT singlets. It is thought that a similar mechanism (that also involves additional proteins) is present in other animal cells, but it remains to be investigated whether the same players and their ascribed functions are conserved during basal body duplication in cells that exclusively contain basal bodies. To investigate this question, we have used the multiciliated protist Paramecium tetraurelia. Here we show that in the absence of PtSas4, two types of defects in basal body duplication can be identified. In the majority of cases, the germinative disk and cartwheel, the first structures assembled during duplication, are not detected. In addition, if daughter basal bodies were formed, they invariably had defects in MT recruitment. Our results suggest that PtSas4 has a broader function than its animal orthologues. PMID:21289083

SAS-6 assembly templated by the lumen of cartwheel-less centrioles precedes centriole duplication.

Science.gov (United States)

Fong, Chii Shyang; Kim, Minhee; Yang, T Tony; Liao, Jung-Chi; Tsou, Meng-Fu Bryan

2014-07-28

Centrioles are 9-fold symmetric structures duplicating once per cell cycle. Duplication involves self-oligomerization of the centriolar protein SAS-6, but how the 9-fold symmetry is invariantly established remains unclear. Here, we found that SAS-6 assembly can be shaped by preexisting (or mother) centrioles. During S phase, SAS-6 molecules are first recruited to the proximal lumen of the mother centriole, adopting a cartwheel-like organization through interactions with the luminal wall, rather than via their self-oligomerization activity. The removal or release of luminal SAS-6 requires Plk4 and the cartwheel protein STIL. Abolishing either the recruitment or the removal of luminal SAS-6 hinders SAS-6 (or centriole) assembly at the outside wall of mother centrioles. After duplication, the lumen of engaged mother centrioles becomes inaccessible to SAS-6, correlating with a block for reduplication. These results lead to a proposed model that centrioles may duplicate via a template-based process to preserve their geometry and copy number. Copyright © 2014 Elsevier Inc. All rights reserved.

Social Analysis Systems (SAS2) - Phase III

International Development Research Centre (IDRC) Digital Library (Canada)

Scaling Up the International Impact of Action Research : Social Analysis ... up the international impact of action research : SAS phase 3; final technical report ... 000 Canadians abroad to work at the local level on various development issues.

PREFACE Proceedings of the XIV International Conference on Small-Angle Scattering, SAS-2009

Science.gov (United States)

King, Stephen; Terrill, Nicholas

2010-10-01

scientific heart of the conference comprised 10 plenary sessions, interspersed by 39 'themed' parallel sessions, 2 poster sessions, an afternoon tour of Diamond and ISIS, and a week-long exhibition. There were 144 contributed oral presentations and 308 poster presentations across a total of 21 themes. Over half of all presentations fell under 6 themes: biological systems, colloids and solutions, instrumentation, kinetic and time-resolved measurements, polymers, and surfaces and interfaces. The importance of SAS techniques to the study of biology, materials science and soft matter/nanoscience is clear. The plenary presentations, which covered topics as diverse as advanced analysis techniques, biology, green chemistry, materials science and surfaces, were delivered by Frank Bates, Minnesota, USA, Peter Fratzl, MPI Golm, Germany, Buxing Han, Bejing, China, Julia Kornfield, CIT, USA, Jan Skov Pedersen, Aarhus, Denmark, Moonhor Ree, Pohang, Korea, Mitsuhiro Shibayama, Tokyo, Japan, Robert Thomas, Oxford, UK, Jill Trewhella, Sydney, Australia, and Thomas Zemb, ICSM Bagnols, France. Instigated by representatives of the Belgian and Dutch SAS communities one parallel session was dedicated to a tribute for Michel Koch, the pioneer of so many novel applications of SAXS, who retired after 30 years at the EMBL Hamburg in late 2006. With a supporting cast that included Wim Bras, ESRF, France, Tony Ryan, Sheffield, UK and Joe Zaccai, ILL,France, and watched by former colleague André Gabriel, Michel treated the audience to a fascinating - and at times light-hearted - retrospective of the evolution of synchrotron SAXS. Another parallel session was devoted to the work of the canSAS (Collective Action for Nomadic Small-Angle Scatterers) network of large-facility representatives and instrument scientists in areas such as data file formats, intensity calibration and software development. For further information see http://www.smallangles.net/wgwiki/index.php/canSAS_Working_Groups. A total of

Coupling the System Analysis Module with SAS4A/SASSYS-1

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-30

SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format for PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly

[A SAS marco program for batch processing of univariate Cox regression analysis for great database].

Science.gov (United States)

Yang, Rendong; Xiong, Jie; Peng, Yangqin; Peng, Xiaoning; Zeng, Xiaomin

2015-02-01

To realize batch processing of univariate Cox regression analysis for great database by SAS marco program. We wrote a SAS macro program, which can filter, integrate, and export P values to Excel by SAS9.2. The program was used for screening survival correlated RNA molecules of ovarian cancer. A SAS marco program could finish the batch processing of univariate Cox regression analysis, the selection and export of the results. The SAS macro program has potential applications in reducing the workload of statistical analysis and providing a basis for batch processing of univariate Cox regression analysis.

The Prospects of SAS Interferometry for Detection and Classification (SAS Interferometrie voor Detectie en Classificatie)

Science.gov (United States)

2008-10-01

DV2008A176 Opdrachtnummer Datum October 2008 Auteur (s) dr. R. van Vossen B.A.J. Quesson dr.ir. J.C. Sabel Rubricering rapport Ongerubriceerd TH9...TNO report | TNO-DV 2008 A176 4/44 Summary This report presents an overview of the theory and implementation of interferometric SAS processing at TNO... theory in software has been tested on two types of data, simulated and measured. Chapter 3 presents results obtained with simulated data; Chapter 4

SAS- Semantic Annotation Service for Geoscience resources on the web

Science.gov (United States)

Elag, M.; Kumar, P.; Marini, L.; Li, R.; Jiang, P.

2015-12-01

There is a growing need for increased integration across the data and model resources that are disseminated on the web to advance their reuse across different earth science applications. Meaningful reuse of resources requires semantic metadata to realize the semantic web vision for allowing pragmatic linkage and integration among resources. Semantic metadata associates standard metadata with resources to turn them into semantically-enabled resources on the web. However, the lack of a common standardized metadata framework as well as the uncoordinated use of metadata fields across different geo-information systems, has led to a situation in which standards and related Standard Names abound. To address this need, we have designed SAS to provide a bridge between the core ontologies required to annotate resources and information systems in order to enable queries and analysis over annotation from a single environment (web). SAS is one of the services that are provided by the Geosematnic framework, which is a decentralized semantic framework to support the integration between models and data and allow semantically heterogeneous to interact with minimum human intervention. Here we present the design of SAS and demonstrate its application for annotating data and models. First we describe how predicates and their attributes are extracted from standards and ingested in the knowledge-base of the Geosemantic framework. Then we illustrate the application of SAS in annotating data managed by SEAD and annotating simulation models that have web interface. SAS is a step in a broader approach to raise the quality of geoscience data and models that are published on the web and allow users to better search, access, and use of the existing resources based on standard vocabularies that are encoded and published using semantic technologies.

Direct utilization of information from nuclear data files in Monte Carlo simulation of neutron and photon transport

International Nuclear Information System (INIS)

Androsenko, P.; Joloudov, D.; Kompaniyets, A.

2001-01-01

Questions, related to Monte-Carlo method for solution of neutron and photon transport equation, are discussed in the work concerned. Problems dealing with direct utilization of information from evaluated nuclear data files in run-time calculations are considered. ENDF-6 format libraries have been used for calculations. Approaches provided by the rules of ENDF-6 files 2, 3-6, 12-15, 23, 27 and algorithms for reconstruction of resolved and unresolved resonance region cross sections under preset energy are described. The comparison results of calculations made by NJOY and GRUCON programs and computed cross sections data are represented. Test computation data of neutron leakage spectra for spherical benchmark-experiments are also represented. (authors)

Want independent validation and assurance? Ask for a SAS-70.

Science.gov (United States)

Boutin, Christopher C

2008-08-01

The AICPA's Statement on Auditing Standards No.70, Service Organizations addresses CPA audits of service providers conducted to verify that a provider has adequate controls over its operations. Hospitals should request a SAS-70, the report produced by such an audit, from all of their third-party service providers. SAS-70s can be issued for a specific date or for a six-month period, and they typically consist of three sections: a CPA opinion, a description of controls, and information about the design of the controls.

Vybrané výběrové statistické metody v programu SAS

OpenAIRE

Voříšek, Jan

2009-01-01

In the present work we study methodology of different kinds of sample surveys and their design in SAS software. Creating of SAS Enterprise Guide Add-In was the fundamental creative part of this work. This Add-In enables to compute important statistics of sample surveys, without need of being familiar with SAS code. Add-In was created in MSFT Visual Studio 2003 in C # language using a tamplate for Add-Ins provided by SAS. This work contains a general description of the creation of an Add-In as...

Analysis of metal fuel transient overpower experiments with the SAS4A accident analysis code

International Nuclear Information System (INIS)

Tentner, A.M.; Kalimullah; Miles, K.J.

1990-01-01

The results of the SAS4A analysis of the M7 TREAT Metal fuel experiment are presented. New models incorporated in the metal fuel version of SAS4A are described. The computational results are compared with the experimental observations and this comparison is used in the interpretation of physical phenomena. This analysis was performed using the integrated metal fuel SAS4A version and covers a wide range of events, providing an increased degree of confidence in the SAS4A metal fuel accident analysis capabilities

Adaptation of XMM-Newton SAS to GRID and VO architectures via web

Science.gov (United States)

Ibarra, A.; de La Calle, I.; Gabriel, C.; Salgado, J.; Osuna, P.

2008-10-01

The XMM-Newton Scientific Analysis Software (SAS) is a robust software that has allowed users to produce good scientific results since the beginning of the mission. This has been possible given the SAS capability to evolve with the advent of new technologies and adapt to the needs of the scientific community. The prototype of the Remote Interface for Science Analysis (RISA) presented here, is one such example, which provides remote analysis of XMM-Newton data with access to all the existing SAS functionality, while making use of GRID computing technology. This new technology has recently emerged within the astrophysical community to tackle the ever lasting problem of computer power for the reduction of large amounts of data.

Airbus A320 NEO Base Maintenance Concept SAS Operations

OpenAIRE

Dafgård, Oscar

2017-01-01

Detta arbete har utförts tillsammans med SAS, för att undersöka om ett base maintenance koncept med ett intervall på 36 månader skulle vara mer kostnadseffektivt än 24 månader för deras nya Airbus A320 NEO flotta. SAS, precis som alla andra flygbolag utnyttjar sina flygplan på sina egna och specifika vis. Eftersom inga flygbolag opererar på samma sätt kan inte heller underhållet skötas på samma sätt för en specifik flygplanstyp. Underhållsprogrammet behövde därför ses över för att optimeras g...

SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2007-01-01

SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

SAS üritab panna riiki lennufirma aktsiaid müüma / Lemmi Kann

Index Scriptorium Estoniae

Kann, Lemmi

2007-01-01

SAS-i eesmärgiks on saada enamusosalus nii Estonian Airis kui ka airBalticus, et seeläbi oma positsioone Baltimaades kinnistada. Diagramm: Estonian Airi majandusnäitajad ja omanikud. Vt. samas: SAS on Estonian Airi jahtinud kaua. Kommenteerib Raivo Vare

75 FR 66748 - Notice of Baseline Filings

Science.gov (United States)

2010-10-29

...- 000] Notice of Baseline Filings October 22, 2010. ONEOK Gas Transportation, L.L.C Docket No. PR11-68... above submitted a revised baseline filing of their Statement of Operating Conditions for services...

Aging-Resistant Functionalized LDH⁻SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism.

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui; Wang, Xin

2018-05-18

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH⁻SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH⁻SAS composites. Successful preparation of LDH⁻SAS was confirmed by XRD, TGA and FTIR. LDH⁻SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH⁻SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance.

Essentials of Excel, Excel VBA, SAS and Minitab for statistical and financial analyses

CERN Document Server

Lee, Cheng-Few; Chang, Jow-Ran; Tai, Tzu

2016-01-01

This introductory textbook for business statistics teaches statistical analysis and research methods via business case studies and financial data using Excel, MINITAB, and SAS. Every chapter in this textbook engages the reader with data of individual stock, stock indices, options, and futures. One studies and uses statistics to learn how to study, analyze, and understand a data set of particular interest. Some of the more popular statistical programs that have been developed to use statistical and computational methods to analyze data sets are SAS, SPSS, and MINITAB. Of those, we look at MINITAB and SAS in this textbook. One of the main reasons to use MINITAB is that it is the easiest to use among the popular statistical programs. We look at SAS because it is the leading statistical package used in industry. We also utilize the much less costly and ubiquitous Microsoft Excel to do statistical analysis, as the benefits of Excel have become widely recognized in the academic world and its analytical capabilities...

49 CFR 805.735-26 - Employee's complaint on filing requirements.

Science.gov (United States)

2010-10-01

...) NATIONAL TRANSPORTATION SAFETY BOARD EMPLOYEE RESPONSIBILITIES AND CONDUCT § 805.735-26 Employee's complaint on filing requirements. An employee who believes that his position has been improperly included... 49 Transportation 7 2010-10-01 2010-10-01 false Employee's complaint on filing requirements. 805...

Aging-Resistant Functionalized LDH–SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui

2018-01-01

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH–SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH–SAS composites. Successful preparation of LDH–SAS was confirmed by XRD, TGA and FTIR. LDH–SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH–SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance. PMID:29783656

SAS-1 Is a C2 Domain Protein Critical for Centriole Integrity in C. elegans

Science.gov (United States)

Delattre, Marie; Balestra, Fernando R.; Blanchoud, Simon; Finger, Susanne; Knott, Graham; Müller-Reichert, Thomas; Gönczy, Pierre

2014-01-01

Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD) syndrome. PMID:25412110

SAS-1 is a C2 domain protein critical for centriole integrity in C. elegans.

Directory of Open Access Journals (Sweden)

Lukas von Tobel

2014-11-01

Full Text Available Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD syndrome.

Anatomy of the TAMA SAS seismic attenuation system

International Nuclear Information System (INIS)

Marka, Szabolcs; Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Wang Chenyang; Yamamoto, Hiroaki; Yoda, Tatsuo

2002-01-01

The TAMA SAS seismic attenuation system was developed to provide the extremely high level of seismic isolation required by the next generation of interferometric gravitational wave detectors to achieve the desired sensitivity at low frequencies. Our aim was to provide good performance at frequencies above ∼10 Hz, while utilizing only passive subsystems in the sensitive frequency band of the TAMA interferometric gravitational wave detectors. The only active feedback is relegated below 6 Hz and it is used to damp the rigid body resonances of the attenuation chain. Simulations, based on subsystem performance characterizations, indicate that the system can achieve rms mirror residual motion measured in a few tens of nanometres. We will give a brief overview of the subsystems and point out some of the characterization results, supporting our claims of achieved performance. SAS is a passive, UHV compatible and low cost system. It is likely that extremely sensitive experiments in other fields will also profit from our study

A fortran code CVTRAN to provide cross-section file for TWODANT by using macroscopic file written by SRAC

International Nuclear Information System (INIS)

Yamane, Tsuyoshi; Tsuchihashi, Keichiro

1999-03-01

A code CVTRAN provides the macroscopic cross-sections in the format of XSLIB file which is one of Standard interface files for a two-dimensional Sn transport code TWODANT by reading a macroscopic cross section file in the PDS format which is prepared by SRAC execution. While a two-dimensional Sn transport code TWOTRAN published by LANL is installed as a module in the SRAC code system, several functions such as alpha search, concentration search, zone thickness search and various edits are suppressed. Since the TWODANT code was released from LANL, its short running time, stable convergence and plenty of edits have attracted many users. The code CVTRAN makes the TWODANT available to the SRAC user by providing the macroscopic cross-sections on a card-image file XSLIB. The CVTRAN also provides material dependent fission spectra into a card-image format file CVLIB, together with group velocities, group boundary energies and material names. The user can feed them into the TWODANT input, if necessary, by cut-and-paste command. (author)

Modelo para la definición e implementación de procesos de gobierno de tecnologías de la información aplicado a CENIT Transporte y Logística de Hidrocarburos S.A.S.

OpenAIRE

Páez Ruiz, Andrea Paola; Vivas Hernández, Fredy

2016-01-01

El crecimiento que ha venido presentando CENIT Transporte y logística de hidrocarburos S.A.S. ha conducido a su área de tecnología a revisar los procesos tecnológicos con los que apoya a todas las áreas de negocio para el logro de la estrategia empresarial. Para poder cumplir con esta promesa de valor hacia la organización, el área de tecnología bajo un marco de trabajo reconocido debe analizar, definir, estructurar e implementar formalmente sus procesos y de esta manera también cumplirá con ...

Ambiguities and completeness of SAS data analysis: investigations of apoferritin by SAXS/SANS EID and SEC-SAXS methods

Science.gov (United States)

Zabelskii, D. V.; Vlasov, A. V.; Ryzhykau, Yu L.; Murugova, T. N.; Brennich, M.; Soloviov, D. V.; Ivankov, O. I.; Borshchevskiy, V. I.; Mishin, A. V.; Rogachev, A. V.; Round, A.; Dencher, N. A.; Büldt, G.; Gordeliy, V. I.; Kuklin, A. I.

2018-03-01

The method of small angle scattering (SAS) is widely used in the field of biophysical research of proteins in aqueous solutions. Obtaining low-resolution structure of proteins is still a highly valuable method despite the advances in high-resolution methods such as X-ray diffraction, cryo-EM etc. SAS offers the unique possibility to obtain structural information under conditions close to those of functional assays, i.e. in solution, without different additives, in the mg/mL concentration range. SAS method has a long history, but there are still many uncertainties related to data treatment. We compared 1D SAS profiles of apoferritin obtained by X-ray diffraction (XRD) and SAS methods. It is shown that SAS curves for X-ray diffraction crystallographic structure of apoferritin differ more significantly than it might be expected due to the resolution of the SAS instrument. Extrapolation to infinite dilution (EID) method does not sufficiently exclude dimerization and oligomerization effects and therefore could not guarantee total absence of dimers account in the final SAS curve. In this study, we show that EID SAXS, EID SANS and SEC-SAXS methods give complementary results and when they are used all together, it allows obtaining the most accurate results and high confidence from SAS data analysis of proteins.

An implementation of SAS reg-sign in an environmental information system

International Nuclear Information System (INIS)

James, T.; Zygmunt, B.C.

1994-01-01

This paper describes a software environmental database information system that uses SAS to process data and ORACLE reg-sign as the relational database management system (RDBMS). The hardware includes a network of UNIX-based servers and workstations. The relational database consists of large tables containing envionmental measurement data, as well as other smaller tables with reference, metadata and internal administrative information. The data come in a variety of formats and must be converted to conform to the system's standards. SAS/ACCESS reg-sign and PROC SQL are used extensively in the data processing

Photonuclear Physics in Radiation Transport - II: Implementation

International Nuclear Information System (INIS)

White, M.C.; Little, R.C.; Chadwick, M.B.; Young, P.G.; MacFarlane, R.E.

2003-01-01

This is the second of two companion papers. The first paper describes model calculations and nuclear data evaluations of photonuclear reactions on isotopes of C, O, Al, Si, Ca, Fe, Cu, Ta, W, and Pb for incident photon energies up to 150 MeV. This paper describes the steps taken to process these files into transport libraries and to update the Monte Carlo N-Particle (MCNP) and MCNPX radiation transport codes to use tabular photonuclear reaction data. The evaluated photonuclear data files are created in the standard evaluated nuclear data file (ENDF) format. These files must be processed by the NJOY data processing system into A Compact ENDF (ACE) files suitable for radiation transport calculations. MCNP and MCNPX have been modified to use these new data in a self-consistent and fully integrated manner. Verification problems were used at each step along the path to check the integrity of the methodology. The resulting methodology and tools provide a comprehensive system for using photonuclear data in radiation transport calculations. Also described are initial validation simulations used to benchmark several of the photonuclear transport tables

C-C1-04: How to Win Friends and Influence People with the SAS Output Delivery System

OpenAIRE

Tolbert, William

2010-01-01

Background and Aims: Long-time SAS users remember the days when SAS output was embarrassingly ugly. Version 7 saw the introduction of the Output Delivery System (ODS). ODS has matured into a very capable subsystem that gives users powerful reporting options. This presentation will highlight useful features and outline a macro-based system for handling multiple ODS destinations simultaneously. Nowadays there is no excuse for ugly SAS output! When building reports, SAS users should think about ...

Social Anxiety Scale for Adolescents (SAS-A): Measuring Social Anxiety among Finnish Adolescents

Science.gov (United States)

Ranta, Klaus; Junttila, Niina; Laakkonen, Eero; Uhmavaara, Anni; La Greca, Annette M.; Niemi, Paivi M.

2012-01-01

The aim of this study was to investigate symptoms of social anxiety and the psychometric properties of the "Social Anxiety Scale for Adolescents" (SAS-A) among Finnish adolescents, 13-16 years of age. Study 1 (n = 867) examined the distribution of SAS-A scores according to gender and age, and the internal consistency and factor structure…

49 CFR 1312.4 - Filing of tariffs.

Science.gov (United States)

2010-10-01

... identifying each publication filed, and by the appropriate filing fee (see 49 CFR part 1002). Acknowledgment... OF TRANSPORTATION (CONTINUED) CARRIER RATES AND SERVICE TERMS REGULATIONS FOR THE PUBLICATION... English with rates explicitly stated in U.S. dollars and cents. Two copies of each tariff publication...

Clinical SAS programming in India: A study of industry needs versus wants

Directory of Open Access Journals (Sweden)

Nithiyanandhan Ananthakrishnan

2014-01-01

Full Text Available Background: The clinical SAS (www.sas.com programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. Aim: This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Settings and Design: Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Materials and Methods: Two surveys were created in www.surveymonkey.com. Management: https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Statistical Analysis Used: Bar chart and pie chart used on data collect to show segmentation of data. Results and Conclusions: In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

The SAS4A/SASSYS-1 Safety Analysis Code System, Version 5

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Brunett, A. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Sumner, T. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-01-01

The SAS4A/SASSYS-1 computer code is developed by Argonne National Laboratory for thermal, hydraulic, and neutronic analysis of power and flow transients in liquidmetal- cooled nuclear reactors (LMRs). SAS4A was developed to analyze severe core disruption accidents with coolant boiling and fuel melting and relocation, initiated by a very low probability coincidence of an accident precursor and failure of one or more safety systems. SASSYS-1, originally developed to address loss-of-decay-heat-removal accidents, has evolved into a tool for margin assessment in design basis accident (DBA) analysis and for consequence assessment in beyond-design-basis accident (BDBA) analysis. SAS4A contains detailed, mechanistic models of transient thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, its coolant, fuel elements, and structural members to accident conditions. The core channel models in SAS4A provide the capability to analyze the initial phase of core disruptive accidents, through coolant heat-up and boiling, fuel element failure, and fuel melting and relocation. Originally developed to analyze oxide fuel clad with stainless steel, the models in SAS4A have been extended and specialized to metallic fuel with advanced alloy cladding. SASSYS-1 provides the capability to perform a detailed thermal/hydraulic simulation of the primary and secondary sodium coolant circuits and the balance-ofplant steam/water circuit. These sodium and steam circuit models include component models for heat exchangers, pumps, valves, turbines, and condensers, and thermal/hydraulic models of pipes and plena. SASSYS-1 also contains a plant protection and control system modeling capability, which provides digital representations of reactor, pump, and valve controllers and their response to input signal changes.

Clinical SAS programming in India: A study of industry needs versus wants.

Science.gov (United States)

Ananthakrishnan, Nithiyanandhan

2014-07-01

The clinical SAS (www.sas.com) programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Two surveys were created in www.surveymonkey.com. https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Bar chart and pie chart used on data collect to show segmentation of data. In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

Transport in ratchets with single-file constraint

Indian Academy of Sciences (India)

file diffusion” in the literature. Anomaly in protein molecule diffusion on a cell ... tic media [20]. The rectification effect vanishes in the adiabatically slow modulation limit and optimizes in a driving frequency range. In other related work on flash-.

[Shoulder dystocia: Quality of retranscription in medical files].

Science.gov (United States)

Martin, E; Bouet, P-E; Sentilhes, L; Legendre, G

2016-03-01

Shoulder dystocia is a rare obstetrical event and potentially serious. Apart from possible psychological implications, it may be responsible for maternal (haemorrhage and perineal tear) and neonatal complications (brachial plexus) leading to complaints and even lawsuits. The transcription of this event in medical files is essential as it is a reflection of the work in an emergency. It allows the obstetrician to defend him in case of trial. Our objective was to assess the quality of the transcription of shoulder dystocia situations in medical files. Retrospective chart study conducted in a university hospital with maternity type III. The primary objective was the rate of comprehensive records (name maneuvers and order of maneuvers of the anterior shoulder hand, time between the expulsion of the head and body, Apgar score). Between 2007 and 2015, 54 cases of shoulder dystocia requiring a second line maneuver after vaginal delivery (Wood and/or Jacquemier) were included. In all, 98.2% of the files were incomplete. The maneuvers and their order were noted in 100% of cases. However, the operation was not correctly described in 16.7% of cases. The anterior shoulder was noted in 16.7% of cases. The time between the expulsion of the head and the body was noted in one single files. Neither broken collarbone nor brachial plexus were observed. To improve the management of dystocia shoulder and transcription of data in files, simulation sessions and the creation of a standardized form would be needed. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

School Survey on Crime and Safety (SSOCS) 2000 Public-Use Data Files, User's Manual, and Detailed Data Documentation. [CD-ROM].

Science.gov (United States)

National Center for Education Statistics (ED), Washington, DC.

This CD-ROM contains the raw, public-use data from the 2000 School Survey on Crime and Safety (SSOCS) along with a User's Manual and Detailed Data Documentation. The data are provided in SAS, SPSS, STATA, and ASCII formats. The User's Manual and the Detailed Data Documentation are provided as .pdf files. (Author)

Validation of the metal fuel version of the SAS4A accident analysis code

International Nuclear Information System (INIS)

Tentner, A.M.

1991-01-01

This paper describes recent work directed towards the validation of the metal fuel version of the SAS4A accident analysis code. The SAS4A code system has been developed at Argonne National Laboratory for the simulation of hypothetical severe accidents in Liquid Metal-Cooled Reactors (LMR), designed to operate in a fast neutron spectrum. SAS4A was initially developed for the analysis of oxide-fueled liquid metal-cooled reactors and has played an important role in the simulation and assessment of the energetics potential for postulated severe accidents in these reactors. Due to the current interest in the metal-fueled liquid metal-cooled reactors, a metal fuel version of the SAS4A accident analysis code is being developed in the Integral Fast Reactor program at Argonne. During such postulated accident scenarios as the unprotected (i.e. without scram) loss-of-flow and transient overpower events, a large number of interrelated physical phenomena occur during a relatively short time. These phenomena include transient heat transfer and hydrodynamic events, coolant boiling, and fuel and cladding melting and relocation. Due to strong neutronic feedbacks these events can significantly influence the reactor power history in the accident progression. The paper presents the results of a recent SAS4A simulation of the M7 TREAT experiment. 6 refs., 5 figs

CTTITEM: SAS macro and SPSS syntax for classical item analysis.

Science.gov (United States)

Lei, Pui-Wa; Wu, Qiong

2007-08-01

This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

Centriolar SAS-7 acts upstream of SPD-2 to regulate centriole assembly and pericentriolar material formation

Science.gov (United States)

Sugioka, Kenji; Hamill, Danielle R; Lowry, Joshua B; McNeely, Marie E; Enrick, Molly; Richter, Alyssa C; Kiebler, Lauren E; Priess, James R; Bowerman, Bruce

2017-01-01

The centriole/basal body is a eukaryotic organelle that plays essential roles in cell division and signaling. Among five known core centriole proteins, SPD-2/Cep192 is the first recruited to the site of daughter centriole formation and regulates the centriolar localization of the other components in C. elegans and in humans. However, the molecular basis for SPD-2 centriolar localization remains unknown. Here, we describe a new centriole component, the coiled-coil protein SAS-7, as a regulator of centriole duplication, assembly and elongation. Intriguingly, our genetic data suggest that SAS-7 is required for daughter centrioles to become competent for duplication, and for mother centrioles to maintain this competence. We also show that SAS-7 binds SPD-2 and regulates SPD-2 centriolar recruitment, while SAS-7 centriolar localization is SPD-2-independent. Furthermore, pericentriolar material (PCM) formation is abnormal in sas-7 mutants, and the PCM-dependent induction of cell polarity that defines the anterior-posterior body axis frequently fails. We conclude that SAS-7 functions at the earliest step in centriole duplication yet identified and plays important roles in the orchestration of centriole and PCM assembly. DOI: http://dx.doi.org/10.7554/eLife.20353.001 PMID:28092264

%HPGLIMMIX: A High-Performance SAS Macro for GLMM Estimation

Directory of Open Access Journals (Sweden)

Liang Xie

2014-06-01

Full Text Available Generalized linear mixed models (GLMMs comprise a class of widely used statistical tools for data analysis with fixed and random effects when the response variable has a conditional distribution in the exponential family. GLMM analysis also has a close relationship with actuarial credibility theory. While readily available programs such as the GLIMMIX procedure in SAS and the lme4 package in R are powerful tools for using this class of models, these progarms are not able to handle models with thousands of levels of fixed and random effects. By using sparse-matrix and other high performance techniques, procedures such as HPMIXED in SAS can easily fit models with thousands of factor levels, but only for normally distributed response variables. In this paper, we present the %HPGLIMMIX SAS macro that fits GLMMs with large number of sparsely populated design matrices using the doubly-iterative linearization (pseudo-likelihood method, in which the sparse-matrix-based HPMIXED is used for the inner iterations with the pseudo-variable constructed from the inverse-link function and the chosen model. Although the macro does not have the full functionality of the GLIMMIX procedure, time and memory savings can be large with the new macro. In applications in which design matrices contain many zeros and there are hundreds or thousands of factor levels, models can be fitted without exhausting computer memory, and 90% or better reduction in running time can be observed. Examples with a Poisson, binomial, and gamma conditional distribution are presented to demonstrate the usage and efficiency of this macro.

The Development of Student’s Activity Sheets (SAS) Based on Multiple Intelligences and Problem-Solving Skills Using Simple Science Tools

Science.gov (United States)

Wardani, D. S.; Kirana, T.; Ibrahim, M.

2018-01-01

The aim of this research is to produce SAS based on MI and problem-solving skills using simple science tools that are suitable to be used by elementary school students. The feasibility of SAS is evaluated based on its validity, practicality, and effectiveness. The completion Lesson Plan (LP) implementation and student’s activities are the indicators of SAS practicality. The effectiveness of SAS is measured by indicators of increased learning outcomes and problem-solving skills. The development of SAS follows the 4-D (define, design, develop, and disseminate) phase. However, this study was done until the third stage (develop). The written SAS was then validated through expert evaluation done by two experts of science, before its is tested to the target students. The try-out of SAS used one group with pre-test and post-test design. The result of this research shows that SAS is valid with “good” category. In addition, SAS is considered practical as seen from the increase of student activity at each meeting and LP implementation. Moreover, it was considered effective due to the significant difference between pre-test and post-test result of the learning outcomes and problem-solving skill test. Therefore, SAS is feasible to be used in learning.

Effect of hyperbaric oxygen therapy on SAS and SDS in children with ischemic encephalopathy

Directory of Open Access Journals (Sweden)

Pei-Yun Li

2017-08-01

Full Text Available Objective: To study and analyze the effect of early psychological intervention on the scores of SAS and SDS in children with hypoxic-ischemic encephalopathy undergoing hyperbaric oxygen therapy. Methods: A total of 64 children with hypoxic - ischemic encephalopathy enrolled in our hospital from July 2015 to July 2016 and their parents were selected as study subjects. The patients were treated with hyperbaric oxygen therapy, while their parents were given early psychological intervention. By the way of increasing parents’ awareness of the disease, helping parents build confidence in their children’s treatment and encouraging them to participate in daily training for their children to relieve their anxiety and depression. The parents' knowledge of the disease before and during treatment, the treatment of hyperbaric oxygen therapy and the change of SAS and SDS were observed. Results: After effective intervention, the scores of SAS and SDS of 64 patients’ parents were significantly lower than those before treatment. After 1 courses of intervention, the score of SAS was (43.36 ± 1.27 points, and the score of SDS was (45.22 ± 8.13 points. After 2 courses of intervention, the score of SAS was (41.07 ± 1.21 and the score of SDS was (42.35 ± 7.44 points, and parents' awareness of hypoxic-ischemic encephalopathy was significantly increased, and the differences between the two groups were statistically significant. Conclusion: Early psychological intervention on parents of children with hypoxic-ischemic encephalopathy can effectively improve the awareness of parents on the disease, so as to improve their acceptance of hyperbaric oxygen therapy; significantly reduce the parents’ SAS, SDS score. It is beneficial to build a good doctor-patient and nurse-patient relationship, improve the treatment effect and shorten the treatment time.

Modeling developments for the SAS4A and SASSYS computer codes

International Nuclear Information System (INIS)

Cahalan, J.E.; Wei, T.Y.C.

1990-01-01

The SAS4A and SASSYS computer codes are being developed at Argonne National Laboratory for transient analysis of liquid metal cooled reactors. The SAS4A code is designed to analyse severe loss-of-coolant flow and overpower accidents involving coolant boiling, Cladding failures, and fuel melting and relocation. Recent SAS4A modeling developments include extension of the coolant boiling model to treat sudden fission gas release upon pin failure, expansion of the DEFORM fuel behavior model to handle advanced cladding materials and metallic fuel, and addition of metallic fuel modeling capability to the PINACLE and LEVITATE fuel relocation models. The SASSYS code is intended for the analysis of operational and beyond-design-basis transients, and provides a detailed transient thermal and hydraulic simulation of the core, the primary and secondary coolant circuits, and the balance-of-plant, in addition to a detailed model of the plant control and protection systems. Recent SASSYS modeling developments have resulted in detailed representations of the balance of plant piping network and components, including steam generators, feedwater heaters and pumps, and the turbine. 12 refs., 2 tabs

Design and analysis of experiments with SAS

CERN Document Server

Lawson, John

2010-01-01

IntroductionStatistics and Data Collection Beginnings of Statistically Planned Experiments Definitions and Preliminaries Purposes of Experimental Design Types of Experimental Designs Planning Experiments Performing the Experiments Use of SAS SoftwareCompletely Randomized Designs with One Factor Introduction Replication and Randomization A Historical Example Linear Model for Completely Randomized Design (CRD) Verifying Assumptions of the Linear Model Analysis Strategies When Assumptions Are Violated Determining the Number of Replicates Comparison of Treatments after the F-TestFactorial Designs

76 FR 8725 - Notice of Baseline Filings

Science.gov (United States)

2011-02-15

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of Baseline Filings Enstor Grama Ridge Storage and Docket No. PR10-97-002. Transportation, L.L.C.. EasTrans, LLC Docket No. PR10-30-001... revised baseline filing of their Statement of Operating Conditions for services provided under section 311...

Unsteady Simulations of the Flow in a Channel Flow and a Ventilated Room Using the SST-SAS Model

DEFF Research Database (Denmark)

Davidson, Lars; Nielsen, Peter V.

The SAS model (Scale Adapted Simulation) was invented by Menter and his co-workers. The idea behind the SST-SAS model is to add an additional production term - the SAS term - in the w equation which is sensitive to resolved (i.e. unsteady) fluctuations. In regions where the flow is on the limit...

Development and application of the automated Monte Carlo biasing procedure in SAS4

International Nuclear Information System (INIS)

Tang, J.S.; Broadhead, B.L.

1993-01-01

An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. The automated procedure has been used extensively in the investigation of both computational and experimental benchmarks for the NEACRP working group on shielding assessment of transportation packages. The results of these studies indicate that with the automated biasing procedure, Monte Carlo shielding calculations of spent fuel casks can be easily performed with minimum effort and that accurate results can be obtained at reasonable computing cost. The systematic biasing approach described in this paper can also be applied to other similar shielding problems

PS3-21: Extracting Utilization Data from Clarity into VDW Using Oracle and SAS

Science.gov (United States)

Chimmula, Srivardhan

2013-01-01

Background/Aims The purpose of the presentation is to demonstrate how we use SAS and Oracle to load VDW_Utilization, VDW_DX, and VDW_PX tables from Clarity at the Kaiser Permanente Northern California (KPNC) Division of Research (DOR) site. Methods DOR uses the best of Oracle PL/ SQL and SAS capabilities in building Extract Transform and Load (ETL) processes. These processes extract patient encounter, diagnosis, and procedure data from Teradata-based Clarity. The data is then transformed to fit HMORN’s VDW definitions of the table. This data is then loaded into the Oracle-based VDW table on DOR’s research database and then finally a copy of the table is also created as a SAS dataset. Results DOR builds robust and efficient ETL processes that refresh VDW Utilization table on a monthly basis processing millions of records/observations. The ETL processes have the capability to identify daily changes in Clarity and update the VDW tables on a daily basis. Conclusions KPNC DOR combines the best of both Oracle and SAS worlds to build ETL processes that load the data into VDW Utilization tables efficiently.

A SAS-macro for estimation of the cumulative incidence using Poisson regression

DEFF Research Database (Denmark)

Waltoft, Berit Lindum

2009-01-01

the hazard rates, and the hazard rates are often estimated by the Cox regression. This procedure may not be suitable for large studies due to limited computer resources. Instead one uses Poisson regression, which approximates the Cox regression. Rosthøj et al. presented a SAS-macro for the estimation...... of the cumulative incidences based on the Cox regression. I present the functional form of the probabilities and variances when using piecewise constant hazard rates and a SAS-macro for the estimation using Poisson regression. The use of the macro is demonstrated through examples and compared to the macro presented...

SEPARATION ANXIETY SYNDROME (SAS IN DOGS FROM FERNANDOPOLIS, SP, REFERRED TO UNICASTELO VETERINARY HOSPITAL SÍNDROME DA ANSIEDADE DE SEPARAÇÃO (SAS EM CÃES ATENDIDOS NO HOSPITAL VETERINÁRIO DA UNICASTELO, FERNANDÓPOLIS, SP

Directory of Open Access Journals (Sweden)

Adriana Alonso Novais

2010-04-01

Full Text Available The separation anxiety syndrome (SAS is defined by a group of altered behaviors showed by dogs when they are left alone, contributing for the most common behavior problems in this specie. The basic clinical signs of SAS are the following: distress vocalization (whining, barking, howling, destructiveness and house soiling. SAS reduce the animal’s life quality and is a frequent cause of abandonment and euthanasia of these dogs. The goal of this research was to verify the occurrence of SAS in dogs from Fernandopolis, SP, referred to the veterinary hospital of Unicastelo, in the period lying between december/2007 and december/2008. Seventy five animals were studied, comprising 30 (40% adult males, 9 (12% young males, 30 (40% adult females and 6 (8% young females. The dogs were evaluated through data given by the owners, according to a behavior questionnaire. From the general studied population, 35 dogs (47% showed distress vocalization, 29 (39% dogs showed micturition at inappropriate places, 17 (23% dogs showed defecation at inappropriate places and 22 (29% showed destructiveness during the periods of the owner’s absence. From the obtained results we may conclude the occurrence of SAS in 68% of the studied dogs.

KEY WORDS: Dogs, animal behavior, behavior disturbances, SAS.

A síndrome da ansiedade de separação (SAS é definida como o conjunto de comportamentos exibidos por cães quando são deixados sozinhos. É considerada um dos problemas comportamentais mais comuns da espécie. Os sinais clínicos básicos da SAS são vocalização excessiva, destruição de objetos, defecação e micção em locais impróprios, acarretando prejuízos na qualidade de vida dos animais. Sendo uma das causas de abandono e eutanásia desses animais, a SAS foi pesquisada em cães atendidos no Hospital Veterinário da Unicastelo em Fernandópolis, SP, no período de dezembro de 2007 a dezembro de 2008, mediante levantamento realizado em 75

Interpretation of the CABRI LT1 test with SAS4A-code analysis

International Nuclear Information System (INIS)

Sato, Ikken; Onoda, Yu-uichi

2001-03-01

In the CABRI-FAST LT1 test, simulating a ULOF (Unprotected Loss of Flow) accident of LMFBR, pin failure took place rather early during the transient. No fuel melting is expected at this failure because the energy injection was too low and a rapid gas-release-like response leading to coolant-channel voiding was observed. This channel voiding was followed by a gradual fuel breakup and axial relocation. With an aid of SAS4A analysis, interpretation of this test was performed. Although the original SAS4A model was not well fitted to this type of early pin failure, the global behavior after the pin failure was reasonably simulated with temporary modifications. Through this study, gas release behavior from the failed fuel pin and its effect on further transient were well understood. It was also demonstrated that the SAS4A code has a potential to simulate the post-failure behavior initiated by a very early pin failure provided that necessary model modification is given. (author)

Using SAS PROC MCMC for Item Response Theory Models

Science.gov (United States)

Ames, Allison J.; Samonte, Kelli

2015-01-01

Interest in using Bayesian methods for estimating item response theory models has grown at a remarkable rate in recent years. This attentiveness to Bayesian estimation has also inspired a growth in available software such as WinBUGS, R packages, BMIRT, MPLUS, and SAS PROC MCMC. This article intends to provide an accessible overview of Bayesian…

SAS macro programs for geographically weighted generalized linear modeling with spatial point data: applications to health research.

Science.gov (United States)

Chen, Vivian Yi-Ju; Yang, Tse-Chuan

2012-08-01

An increasing interest in exploring spatial non-stationarity has generated several specialized analytic software programs; however, few of these programs can be integrated natively into a well-developed statistical environment such as SAS. We not only developed a set of SAS macro programs to fill this gap, but also expanded the geographically weighted generalized linear modeling (GWGLM) by integrating the strengths of SAS into the GWGLM framework. Three features distinguish our work. First, the macro programs of this study provide more kernel weighting functions than the existing programs. Second, with our codes the users are able to better specify the bandwidth selection process compared to the capabilities of existing programs. Third, the development of the macro programs is fully embedded in the SAS environment, providing great potential for future exploration of complicated spatially varying coefficient models in other disciplines. We provided three empirical examples to illustrate the use of the SAS macro programs and demonstrated the advantages explained above. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The Spectrum Analysis Solution (SAS) System: Theoretical Analysis, Hardware Design and Implementation.

Science.gov (United States)

Narayanan, Ram M; Pooler, Richard K; Martone, Anthony F; Gallagher, Kyle A; Sherbondy, Kelly D

2018-02-22

This paper describes a multichannel super-heterodyne signal analyzer, called the Spectrum Analysis Solution (SAS), which performs multi-purpose spectrum sensing to support spectrally adaptive and cognitive radar applications. The SAS operates from ultrahigh frequency (UHF) to the S-band and features a wideband channel with eight narrowband channels. The wideband channel acts as a monitoring channel that can be used to tune the instantaneous band of the narrowband channels to areas of interest in the spectrum. The data collected from the SAS has been utilized to develop spectrum sensing algorithms for the budding field of spectrum sharing (SS) radar. Bandwidth (BW), average total power, percent occupancy (PO), signal-to-interference-plus-noise ratio (SINR), and power spectral entropy (PSE) have been examined as metrics for the characterization of the spectrum. These metrics are utilized to determine a contiguous optimal sub-band (OSB) for a SS radar transmission in a given spectrum for different modalities. Three OSB algorithms are presented and evaluated: the spectrum sensing multi objective (SS-MO), the spectrum sensing with brute force PSE (SS-BFE), and the spectrum sensing multi-objective with brute force PSE (SS-MO-BFE).

Provider Specific Data for Public Use in SAS Format

Data.gov (United States)

U.S. Department of Health & Human Services — The Fiscal Intermediary maintains the Provider Specific File (PSF). The file contains information about the facts specific to the provider that affects computations...

The gamma-ray radiation preservation technology for files and books

International Nuclear Information System (INIS)

Fan Chengfa; Tian Kaizen; Zhang Yunlu; Gan Saohan; Wang Zhengfu; Xiang Jiafang

1988-01-01

In this paper, a radiation appliance using CO-60 Gamma-ray to preserve the files and books is introduced. The lump and transport radiation techniques for processing files and books with this radiation appliance is described. The cost of preserving files and books with this method has been estimated. Comparison of this method with other processing techniques has been taken. (author)

Experimental Analysis of File Transfer Rates over Wide-Area Dedicated Connections

Energy Technology Data Exchange (ETDEWEB)

Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Sen, Satyabrata [ORNL; Hinkel, Gregory Carl [ORNL; Imam, Neena [ORNL; Foster, Ian [University of Chicago; Kettimuthu, R. [Argonne National Laboratory (ANL); Settlemyer, Bradley [Los Alamos National Laboratory (LANL); Wu, Qishi [University of Memphis; Yun, Daqing [Harrisburg University

2016-12-01

File transfers over dedicated connections, supported by large parallel file systems, have become increasingly important in high-performance computing and big data workflows. It remains a challenge to achieve peak rates for such transfers due to the complexities of file I/O, host, and network transport subsystems, and equally importantly, their interactions. We present extensive measurements of disk-to-disk file transfers using Lustre and XFS file systems mounted on multi-core servers over a suite of 10 Gbps emulated connections with 0-366 ms round trip times. Our results indicate that large buffer sizes and many parallel flows do not always guarantee high transfer rates. Furthermore, large variations in the measured rates necessitate repeated measurements to ensure confidence in inferences based on them. We propose a new method to efficiently identify the optimal joint file I/O and network transport parameters using a small number of measurements. We show that for XFS and Lustre with direct I/O, this method identifies configurations achieving 97% of the peak transfer rate while probing only 12% of the parameter space.

SAS6-like protein in Plasmodium indicates that conoid-associated apical complex proteins persist in invasive stages within the mosquito vector.

Science.gov (United States)

Wall, Richard J; Roques, Magali; Katris, Nicholas J; Koreny, Ludek; Stanway, Rebecca R; Brady, Declan; Waller, Ross F; Tewari, Rita

2016-06-24

The SAS6-like (SAS6L) protein, a truncated paralogue of the ubiquitous basal body/centriole protein SAS6, has been characterised recently as a flagellum protein in trypanosomatids, but associated with the conoid in apicomplexan Toxoplasma. The conoid has been suggested to derive from flagella parts, but is thought to have been lost from some apicomplexans including the malaria-causing genus Plasmodium. Presence of SAS6L in Plasmodium, therefore, suggested a possible role in flagella assembly in male gametes, the only flagellated stage. Here, we have studied the expression and role of SAS6L throughout the Plasmodium life cycle using the rodent malaria model P. berghei. Contrary to a hypothesised role in flagella, SAS6L was absent during gamete flagellum formation. Instead, SAS6L was restricted to the apical complex in ookinetes and sporozoites, the extracellular invasive stages that develop within the mosquito vector. In these stages SAS6L forms an apical ring, as we show is also the case in Toxoplasma tachyzoites. The SAS6L ring was not apparent in blood-stage invasive merozoites, indicating that the apical complex is differentiated between the different invasive forms. Overall this study indicates that a conoid-associated apical complex protein and ring structure is persistent in Plasmodium in a stage-specific manner.

Síndrome de apnea del sueño (SAS Sleep apnea syndrome

Directory of Open Access Journals (Sweden)

Camilo José Borrego Abello

1994-03-01

Full Text Available Se describe el síndrome de apnea del sueño (SAS abarcando los aspectos históricos, signos y síntomas, las diversas modalidades (apneas obstructiva, central y mixta, complicaciones, principalmente cardiovasculares y cerebrovasculares y formas de tratamiento. Se hace énfasis en la ayuda diagnóstica del polisomnograma que ha permitido definir como SAS síntomas antes considerados inespecíficos y cuantificar su gravedad. Se describen las diversas medidas terapéuticas, locales y generales, recalcando los beneficios que se obtienen con la aplicación de los aparatos de respiración a presión positiva. Estos permiten tratamientos no invasivos que hacen desaparecer la totalidad de los síntomas y evitan los riesgos incrementados de trastornos cardiovasculares y accidentes laborales o de tránsito. Este grave síndrome afecta a un grupo grande de población por lo que su importancia es indudable.

Different aspects of the sleep apnea síndrome (SAS are described, including history, clinical manifestations, clinical forms (obstructive, central and mixed, cardiovascular, cerebrovascular and other complications and treatment. With the use of the polysomnogram it has been possible to define non-specific symptoms as due to SAS and to quantitate their seriousness. Different therapeutic approaches are described, both local and systemic, with emphasis on the benefits obtained from the use of positive pressure breathing machines which control every manifestation of the syndrome and avoid the increased cardiovascular risks aswell as work and traffic accidents. This syndrome is important in terms of frequency and of increased death risk.

De novo centriole formation in human cells is error-prone and does not require SAS-6 self-assembly.

Science.gov (United States)

Wang, Won-Jing; Acehan, Devrim; Kao, Chien-Han; Jane, Wann-Neng; Uryu, Kunihiro; Tsou, Meng-Fu Bryan

2015-11-26

Vertebrate centrioles normally propagate through duplication, but in the absence of preexisting centrioles, de novo synthesis can occur. Consistently, centriole formation is thought to strictly rely on self-assembly, involving self-oligomerization of the centriolar protein SAS-6. Here, through reconstitution of de novo synthesis in human cells, we surprisingly found that normal looking centrioles capable of duplication and ciliation can arise in the absence of SAS-6 self-oligomerization. Moreover, whereas canonically duplicated centrioles always form correctly, de novo centrioles are prone to structural errors, even in the presence of SAS-6 self-oligomerization. These results indicate that centriole biogenesis does not strictly depend on SAS-6 self-assembly, and may require preexisting centrioles to ensure structural accuracy, fundamentally deviating from the current paradigm.

Comparison of canal transportation and centering ability of hand Protaper files and rotary Protaper files by using micro computed tomography

OpenAIRE

Amit Gandhi; Taru Gandhi

2011-01-01

Introduction and objective: The aim of the present study was to compare root canal preparation with rotary ProTaper files and hand ProTaper files to find a better instrumentation technique for maintaining root canal geometry with the aid of computed tomography. Material and methods: Twenty curved root canals with at least 10 degree of curvature were divided into 2 groups of 10 teeth each. In group I the canals were prepared with hand ProTaper files and in group II the canals were prepared wit...

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.

1985-01-01

SAS4A is a new code system which has been designed for analyzing the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modeling the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel motion experiment analyses are also presented

Fuel relocation modeling in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Tentner, A.M.; Miles, K.J.; Kalimullah; Hill, D.J.

1986-01-01

The SAS4A code system has been designed for the analysis of the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modelong the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel relocation are emphasized. 12 refs

Repositioning the substrate activity screening (SAS) approach as a fragment-based method for identification of weak binders.

Science.gov (United States)

Gladysz, Rafaela; Cleenewerck, Matthias; Joossens, Jurgen; Lambeir, Anne-Marie; Augustyns, Koen; Van der Veken, Pieter

2014-10-13

Fragment-based drug discovery (FBDD) has evolved into an established approach for "hit" identification. Typically, most applications of FBDD depend on specialised cost- and time-intensive biophysical techniques. The substrate activity screening (SAS) approach has been proposed as a relatively cheap and straightforward alternative for identification of fragments for enzyme inhibitors. We have investigated SAS for the discovery of inhibitors of oncology target urokinase (uPA). Although our results support the key hypotheses of SAS, we also encountered a number of unreported limitations. In response, we propose an efficient modified methodology: "MSAS" (modified substrate activity screening). MSAS circumvents the limitations of SAS and broadens its scope by providing additional fragments and more coherent SAR data. As well as presenting and validating MSAS, this study expands existing SAR knowledge for the S1 pocket of uPA and reports new reversible and irreversible uPA inhibitor scaffolds. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Embedding SAS approach into conjugate gradient algorithms for asymmetric 3D elasticity problems

Energy Technology Data Exchange (ETDEWEB)

Chen, Hsin-Chu; Warsi, N.A. [Clark Atlanta Univ., GA (United States); Sameh, A. [Univ. of Minnesota, Minneapolis, MN (United States)

1996-12-31

In this paper, we present two strategies to embed the SAS (symmetric-and-antisymmetric) scheme into conjugate gradient (CG) algorithms to make solving 3D elasticity problems, with or without global reflexive symmetry, more efficient. The SAS approach is physically a domain decomposition scheme that takes advantage of reflexive symmetry of discretized physical problems, and algebraically a matrix transformation method that exploits special reflexivity properties of the matrix resulting from discretization. In addition to offering large-grain parallelism, which is valuable in a multiprocessing environment, the SAS scheme also has the potential for reducing arithmetic operations in the numerical solution of a reasonably wide class of scientific and engineering problems. This approach can be applied directly to problems that have global reflexive symmetry, yielding smaller and independent subproblems to solve, or indirectly to problems with partial symmetry, resulting in loosely coupled subproblems. The decomposition is achieved by separating the reflexive subspace from the antireflexive one, possessed by a special class of matrices A, A {element_of} C{sup n x n} that satisfy the relation A = PAP where P is a reflection matrix (symmetric signed permutation matrix).

Agent Based Model in SAS Environment for Rail Transit System Alignment Determination

Directory of Open Access Journals (Sweden)

I Made Indradjaja Brunner

2018-04-01

Full Text Available Transit system had been proposed for the urban area of Honolulu. One consideration to be determined is the alignment of the transit system. Decision to set the transit alignment will have influences on which areas will be served, who will be benefiting, as well as who will be impacted. Inputs for the decision usually conducted through public meetings, where community members are shown numbers of maps with pre-set routes. That approach could lead to a rather subjective decision by the community members. This paper attempts to discuss the utilization of grid map in determining the best alignment for rail transit system in Honolulu, Hawaii. It tries to use a more objective approach using various data derived from thematic maps. Overlaid maps are aggregated into a uniform 0.1-square mile vector based grid map system in GIS environment. The large dataset in the GIS environment is analyzed and manipulated using SAS software. The SAS procedure is applied to select the location of the alignment using a rational and deterministic approach. Grid cells that are superior compared to the others are selected based on several predefined criteria. Location of the dominant cells indicates possible transit alignment. The SAS procedure is designed to allow a transient vector called the GUIDE (Grid Unit with Intelligent Directional Expertise agent to analyze several cells at its vicinity and to move towards a cell with the highest value. Each time the agent landed on a cell, it left a mark. The chain of those marks shows location for the transit alignment. This study shows that the combination of ArcGIS and SAS allows a robust analysis of spatial data and manipulation of its datasets, which can be used to run a simulation mimicking the Agent-Based Modelling. This study also opens up further study possibilities by increasing number of factors analyzed by the agent, as well as creating a composite value of multi-factors.

Escala de sociotropía-autonomía (SAS: propiedades psicométricas de la adaptación a Colombia

Directory of Open Access Journals (Sweden)

Ronald Alberto Toro Tobar

2014-07-01

Full Text Available Este artículo presenta los resultados de una investigación cuyo objetivo fue adaptar y validar la Escala de Sociotropía-Autonomía (SAS de Clark & Beck, la cual evalúa dos dimensiones de personalidad cognitiva: la orientación interpersonal y actitudes de logro y metas personales. La muestra consistió en 460 participantes entre 15 y 71 años, escolarizados de distintos estratos socioeconómicos. Los resultados mostraron índices de consistencia interna en la Escala SAS: total (,85, SAS Sociotropía (,82 y menores para SAS autonomía (,61. Estos resultados guardan relación con investigaciones acerca de este instrumento; por lo tanto se considera confiable y válido para el contexto sociocultural; además podría apoyar la investigación en psicoterapia cognitiva y en procesos clínicos basados en el modelo diátesis estrés. Abstract This paper presents the results of a study whose aim was adapt and validate the Sociotropy-Autonomy Scale (SAS Clark & Beck. This scale assesses two dimensions of cognitive personality: interpersonal orientation and attitudes of achievement and personal goals. The sample consisted of 460 participants between 15 and 71 years enrolled from different socioeconomic levels. The results showed internal consistency in SAS Scale: Total (.85, SAS Sociotropy (.82 and lower for SAS Autonomy (.61. These results are relevant to research on this instrument. It is considered a reliable and valid instrument for socio-cultural context; could also support research in cognitive psychotherapy and clinical processes based on the diathesis stress model.

Confirmatory factor analysis and sample invariance of the Chinese version of Somatosensory Amplification Scale (ChSAS) among Chinese adolescents

OpenAIRE

Tam, B. K.; Wong, W. S.

2011-01-01

Objective: This paper aimed to evaluate the factor structure of the Chinese version of Somatosensory Amplification Scale (ChSAS) in a sample of Chinese adolescents across different grade levels using confirmatory factor analysis (CFA). Methods: A total of 1991 Chinese adolescents completed the ChSAS. CFA assessed the fit of the one-factor model to the entire sample. Factorial invariance of the ChSAS was also examined across grade levels using multigroup CFA. Results: Results of CFA confirmed ...

The School Anxiety Scale-Teacher Report (SAS-TR): translation and psychometric properties of the Iranian version.

Science.gov (United States)

Hajiamini, Zahra; Mohamadi, Ashraf; Ebadi, Abbas; Fathi- Ashtiani, Ali; Tavousi, Mahmoud; Montazeri, Ali

2012-07-18

The School Anxiety Scale-Teacher Report (SAS-TR) was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC) was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety) that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

77 FR 56209 - Notice of Agreements Filed

Science.gov (United States)

2012-09-12

... Yusen Kaisha Line; Orient Overseas Container Line Limited; and Yangming Marine Transport Corp. Filing... & Logistics GmbH & Co. KG; Beluga Chartering GmbH; Chipolbrok; Clipper Project Ltd.; Hyndai Merchant Marine Co...

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

International Nuclear Information System (INIS)

Tveten, U.

1997-02-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

Energy Technology Data Exchange (ETDEWEB)

Tveten, U.

1997-02-01

The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations.

Transportation technology quick reference file

Energy Technology Data Exchange (ETDEWEB)

Shepherd, E.W. (ed.)

1981-05-01

This publication is a collection of items written by different authors on subjects relating to the transportation of radioactive materials. The purpose of the document is to meet the continuing need for information on specific subjects for dissemination to the public at their request. The subjects included were selected on the basis of the questions most often asked about radioactive materials and their transportation. Additional subjects are being considered and will be included in the future. The loose-leaf notebook format is used to facilitate the updating of this material. The data used in many of the papers represent the best available at time of publication and will be updated as more current information becomes available.

Transportation technology quick reference file

International Nuclear Information System (INIS)

Shepherd, E.W.

1981-05-01

This publication is a collection of items written by different authors on subjects relating to the transportation of radioactive materials. The purpose of the document is to meet the continuing need for information on specific subjects for dissemination to the public at their request. The subjects included were selected on the basis of the questions most often asked about radioactive materials and their transportation. Additional subjects are being considered and will be included in the future. The loose-leaf notebook format is used to facilitate the updating of this material. The data used in many of the papers represent the best available at time of publication and will be updated as more current information becomes available

SAS2: Guide sur la recherche collaborative et l'engagement social

International Development Research Centre (IDRC) Digital Library (Canada)

À l'encontre de cette façon de voir, les SAS2 favorisent l'« ancrage social » et la ..... les organismes communautaires, les médias, les fondations philanthropiques, ...... Portez attention aux différences qui peuvent influencer la manière dont les ...

Propiedades psicom??tricas de la versi??n espa??ola de la Sexual Assertiveness Scale (SAS)

OpenAIRE

Sierra Freire, Juan Carlos; Vallejo-Medina, Pablo; Santos-Iglesias, Pablo

2011-01-01

La asertividad sexual se refiere a la capacidad de las personas para iniciar la actividad sexual, rechazar la actividad sexual no deseada y emplear m??todos anticonceptivos, desarrollando comportamientos saluda- bles. La Sexual Assertiveness Scale (SAS) es una escala de 18 ??tems que eval??a tres dimensiones: Inicio, Rechazo y Prevenci??n Embarazo-ETS (E-ETS). En este estudio 853 personas contestaron la SAS, junto a una bater??a de ins- trumentos afines. La puntuaci??n media de los ??tems ha ...

14 CFR 232.5 - Filing and service of applications, answers, and replies.

Science.gov (United States)

2010-01-01

... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TRANSPORTATION OF MAIL, REVIEW OF ORDERS OF POSTMASTER... written application, answer, or reply filed under this part, and the formal specifications of papers...

Genome sequencing and annotation of Proteus sp. SAS71

Directory of Open Access Journals (Sweden)

Samy Selim

2015-12-01

Full Text Available We report draft genome sequence of Proteus sp. strain SAS71, isolated from water spring in Aljouf region, Saudi Arabia. The draft genome size is 3,037,704 bp with a G + C content of 39.3% and contains 6 rRNA sequence (single copies of 5S, 16S & 23S rRNA. The genome sequence can be accessed at DDBJ/EMBL/GenBank under the accession no. LDIU00000000.

The School Anxiety Scale-Teacher Report (SAS-TR: translation and psychometric properties of the Iranian version

Directory of Open Access Journals (Sweden)

Hajiamini Zahra

2012-07-01

Full Text Available Abstract Background The School Anxiety Scale-Teacher Report (SAS-TR was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. Methods The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. Results In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. Conclusion In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

Model development of SAS4A and investigation on the initiating phase consequences in LMFRs related with material motion

International Nuclear Information System (INIS)

Niwa, H.

1994-01-01

This paper focuses on an analytical aspect of the initiating phase scenario and consequences of postulated core disruptive accident in liquid-metal-cooled fast breeder reactors. An analytical code, SAS4A, has been developed at Argonne National Laboratory, and introduced to PNC. Improvement and validation effort have been performed for the mixed-oxide version of SAS4A at PNC. This paper describes firstly recent development of SAS4A's material motion related models briefly. A fission gas mass transfer model and solid fuel chunk jamming model are developed and introduced to SAS4A, and validated using CABRI-2 E13 experimental data. Secondly, an investigation of the mechanism of energetics in the initiating phase of an unprotected loss-of-flow accident has identified major control parameters which are intimately related to core design parameters and material motion phenomena. (author)

Categorical Data Analysis With Sas and Spss Applications

CERN Document Server

Lawal, H Bayo

2003-01-01

This book covers the fundamental aspects of categorical data analysis with an emphasis on how to implement the models used in the book using SAS and SPSS. This is accomplished through the frequent use of examples, with relevant codes and instructions, that are closely related to the problems in the text. Concepts are explained in detail so that students can reproduce similar results on their own. Beginning with chapter two, exercises at the end of each chapter further strengthen students' understanding of the concepts by requiring them to apply some of the ideas expressed in the text in a more

Quality assurance management plan (QAPP) special analytical support (SAS)

Energy Technology Data Exchange (ETDEWEB)

LOCKREM, L.L.

1999-05-20

It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data.

Quality assurance management plan (QAPP) special analytical support (SAS)

International Nuclear Information System (INIS)

LOCKREM, L.L.

1999-01-01

It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data

Comparison of ArcGIS and SAS Geostatistical Analyst to Estimate Population-Weighted Monthly Temperature for US Counties.

Science.gov (United States)

Xiaopeng, Q I; Liang, Wei; Barker, Laurie; Lekiachvili, Akaki; Xingyou, Zhang

Temperature changes are known to have significant impacts on human health. Accurate estimates of population-weighted average monthly air temperature for US counties are needed to evaluate temperature's association with health behaviours and disease, which are sampled or reported at the county level and measured on a monthly-or 30-day-basis. Most reported temperature estimates were calculated using ArcGIS, relatively few used SAS. We compared the performance of geostatistical models to estimate population-weighted average temperature in each month for counties in 48 states using ArcGIS v9.3 and SAS v 9.2 on a CITGO platform. Monthly average temperature for Jan-Dec 2007 and elevation from 5435 weather stations were used to estimate the temperature at county population centroids. County estimates were produced with elevation as a covariate. Performance of models was assessed by comparing adjusted R 2 , mean squared error, root mean squared error, and processing time. Prediction accuracy for split validation was above 90% for 11 months in ArcGIS and all 12 months in SAS. Cokriging in SAS achieved higher prediction accuracy and lower estimation bias as compared to cokriging in ArcGIS. County-level estimates produced by both packages were positively correlated (adjusted R 2 range=0.95 to 0.99); accuracy and precision improved with elevation as a covariate. Both methods from ArcGIS and SAS are reliable for U.S. county-level temperature estimates; However, ArcGIS's merits in spatial data pre-processing and processing time may be important considerations for software selection, especially for multi-year or multi-state projects.

SPSS and SAS programs for comparing Pearson correlations and OLS regression coefficients.

Science.gov (United States)

Weaver, Bruce; Wuensch, Karl L

2013-09-01

Several procedures that use summary data to test hypotheses about Pearson correlations and ordinary least squares regression coefficients have been described in various books and articles. To our knowledge, however, no single resource describes all of the most common tests. Furthermore, many of these tests have not yet been implemented in popular statistical software packages such as SPSS and SAS. In this article, we describe all of the most common tests and provide SPSS and SAS programs to perform them. When they are applicable, our code also computes 100 × (1 - α)% confidence intervals corresponding to the tests. For testing hypotheses about independent regression coefficients, we demonstrate one method that uses summary data and another that uses raw data (i.e., Potthoff analysis). When the raw data are available, the latter method is preferred, because use of summary data entails some loss of precision due to rounding.

Analysis of the OPERA-15 two-dimensional voiding experiment using the SAS4A code

International Nuclear Information System (INIS)

Briggs, L.L.

1984-01-01

Overall, SAS4A appears to do a good job for simulating the OPERA-15 experiment. For most of the experiment parameters, the code calculations compare quite well with the experimental data. The lack of a multi-dimensional voiding model has the effect of extending the flow coastdown time until voiding starts; otherwise, the code simulates the accident progression satisfactorily. These results indicate a need for further work in this area in the form of a tandem analysis by a two-dimensional flow code and a one-dimensional version of that code to confirm the observations derived from the SAS4A analysis

75 FR 1114 - Aviation Proceedings, Agreements Filed the Week Ending December 12, 2009

Science.gov (United States)

2010-01-08

... the International Air Transport Association. Subject: TC3 Within South East Asia except between...: Members of the International Air Transport Association. Subject: TC3 Japan, Korea, Resolutions and.... Date Filed: December 8, 2009. Parties: Members of the International Air Transport Association. Subject...

Data Mining Supercomputing with SAS JMP® Genomics

Directory of Open Access Journals (Sweden)

Richard S. Segall

2011-02-01

Full Text Available JMP® Genomics is statistical discovery software that can uncover meaningful patterns in high-throughput genomics and proteomics data. JMP® Genomics is designed for biologists, biostatisticians, statistical geneticists, and those engaged in analyzing the vast stores of data that are common in genomic research (SAS, 2009. Data mining was performed using JMP® Genomics on the two collections of microarray databases available from National Center for Biotechnology Information (NCBI for lung cancer and breast cancer. The Gene Expression Omnibus (GEO of NCBI serves as a public repository for a wide range of highthroughput experimental data, including the two collections of lung cancer and breast cancer that were used for this research. The results for applying data mining using software JMP® Genomics are shown in this paper with numerous screen shots.

Living Together v. Living Well Together: A Normative Examination of the SAS Case

Directory of Open Access Journals (Sweden)

Lori G. Beaman

2016-04-01

Full Text Available The European Court of Human Rights decision in SAS from France illustrates how a policy and national mantra that ostensibly aims to enhance inclusiveness, ‘living together’, is legally deployed in a manner that may have the opposite effect. In essence, despite acknowledging the sincerity of SAS’s religious practice of wearing the niqab, and her agency in making the decision to do so, the Court focuses on radicalism and women’s oppression amongst Muslims. Taking the notion of living together as the beginning point, the paper explores the normative assumptions underlying this notion as illustrated in the judgment of the Court. An alternative approach, drawing on the work of Derrida for the notion of ‘living well together’ will be proposed and its implications for social inclusion explicated. The paper’s aim is to move beyond the specific example of SAS and France to argue that the SAS pattern of identifying particular values as ‘national values’, the deployment of those values through law, policy and public discourse, and their exclusionary effects is playing out in a number of Western democracies, including Canada, the country with which the author is most familiar. Because of this widespread dissemination of values and their framing as representative of who ‘we’ are, there is a pressing need to consider the potentially alienating effects of a specific manifestation of ‘living together’ and an alternative model of ‘living well together’.

Transport code and nuclear data in intermediate energy region

Energy Technology Data Exchange (ETDEWEB)

Hasegawa, Akira; Odama, Naomitsu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Maekawa, F.; Ueki, K.; Kosaka, K.; Oyama, Y.

1998-11-01

We briefly reviewed the problems of intermediate energy nuclear data file and transport codes in connection with processing of the data. This is a summary of our group in the task force on JENDL High Energy File Integral Evaluation (JHEFIE). In this article we stress the necessity of the production of intermediate evaluated nuclear data file up to 3 GeV for the application of accelerator driven transmutation (ADT) system. And also we state the necessity of having our own transport code system to calculate the radiation fields using these evaluated files from the strategic points of view to keep our development of the ADT technology completely free from other conditions outside of our own such as imported codes and data with poor maintenance or unknown accuracy. (author)

Transport code and nuclear data in intermediate energy region

International Nuclear Information System (INIS)

Hasegawa, Akira; Odama, Naomitsu; Maekawa, F.; Ueki, K.; Kosaka, K.; Oyama, Y.

1998-01-01

We briefly reviewed the problems of intermediate energy nuclear data file and transport codes in connection with processing of the data. This is a summary of our group in the task force on JENDL High Energy File Integral Evaluation (JHEFIE). In this article we stress the necessity of the production of intermediate evaluated nuclear data file up to 3 GeV for the application of accelerator driven transmutation (ADT) system. And also we state the necessity of having our own transport code system to calculate the radiation fields using these evaluated files from the strategic points of view to keep our development of the ADT technology completely free from other conditions outside of our own such as imported codes and data with poor maintenance or unknown accuracy. (author)

SAS-4 is recruited to a dynamic structure in newly forming centrioles that is stabilized by the gamma-tubulin-mediated addition of centriolar microtubules.

Science.gov (United States)

Dammermann, Alexander; Maddox, Paul S; Desai, Arshad; Oegema, Karen

2008-02-25

Centrioles are surrounded by pericentriolar material (PCM), which is proposed to promote new centriole assembly by concentrating gamma-tubulin. Here, we quantitatively monitor new centriole assembly in living Caenorhabditis elegans embryos, focusing on the conserved components SAS-4 and SAS-6. We show that SAS-4 and SAS-6 are coordinately recruited to the site of new centriole assembly and reach their maximum levels during S phase. Centriolar SAS-6 is subsequently reduced by a mechanism intrinsic to the early assembly pathway that does not require progression into mitosis. Centriolar SAS-4 remains in dynamic equilibrium with the cytoplasmic pool until late prophase, when it is stably incorporated in a step that requires gamma-tubulin and microtubule assembly. These results indicate that gamma-tubulin in the PCM stabilizes the nascent daughter centriole by promoting microtubule addition to its outer wall. Such a mechanism may help restrict new centriole assembly to the vicinity of preexisting parent centrioles that recruit PCM.

Download this PDF file

African Journals Online (AJOL)

home

2014-12-11

Dec 11, 2014 ... selection intensity ranged from 0.59 % (hundred seed weight) to 78.1% (number of pods per plant). ... are the staple food, are often deficient in lysine (Geletu et al., 1996). .... GLM procedure of SAS software (SAS, 2004).

Development and validation of logistic prognostic models by predefined SAS-macros

Directory of Open Access Journals (Sweden)

Ziegler, Christoph

2006-02-01

Full Text Available In medical decision making about therapies or diagnostic procedures in the treatment of patients the prognoses of the course or of the magnitude of diseases plays a relevant role. Beside of the subjective attitude of the clinician mathematical models can help in providing such prognoses. Such models are mostly multivariate regression models. In the case of a dichotomous outcome the logistic model will be applied as the standard model. In this paper we will describe SAS-macros for the development of such a model, for examination of the prognostic performance, and for model validation. The rational for this developmental approach of a prognostic modelling and the description of the macros can only given briefly in this paper. Much more details are given in. These 14 SAS-macros are a tool for setting up the whole process of deriving a prognostic model. Especially the possibility of validating the model by a standardized software tool gives an opportunity, which is not used in general in published prognostic models. Therefore, this can help to develop new models with good prognostic performance for use in medical applications.

C-C1-04: How to Win Friends and Influence People with the SAS Output Delivery System

Science.gov (United States)

Tolbert, William

2010-01-01

Background and Aims: Long-time SAS users remember the days when SAS output was embarrassingly ugly. Version 7 saw the introduction of the Output Delivery System (ODS). ODS has matured into a very capable subsystem that gives users powerful reporting options. This presentation will highlight useful features and outline a macro-based system for handling multiple ODS destinations simultaneously. Nowadays there is no excuse for ugly SAS output! When building reports, SAS users should think about the needs of those using the reports. Some people just want to review frequency tables, and are happy to do so on a monitor. Others want to be able to print data for review in a meeting. And, there are always those that want to work with the data in a spreadsheet. Consider the ideal formats for each of the users outlined above. For the casual data browser, HTML output is ideal. For printing, PDF is preferred. And for the additional analysis, Excel is a popular option. With ODS, we can meet all of these needs. Methods: Because ODS permits opening multiple output destinations simultaneously, a single procedure can be used to generate data in HTML, PDF, and Excel at once. The presentation will demonstrate the following: o- basic ODS syntax for HTML, PDF, and Excel output o- custom HTML table of contents o- using the ExcelXP tagset for multi-tab spreadsheets o- a custom macro for managing multiple ODS destinations simultaneously o- simple PROC Template code for easy customization o- techniques for consistent output from multiple platforms. Results: The techniques outlined here have been well-received in a variety of business reporting environments. Conclusions: The SAS ODS provides a wide array of reporting options. Don’t limit yourself to just one type of output.

Non-linear Growth Models in Mplus and SAS

Science.gov (United States)

Grimm, Kevin J.; Ram, Nilam

2013-01-01

Non-linear growth curves or growth curves that follow a specified non-linear function in time enable researchers to model complex developmental patterns with parameters that are easily interpretable. In this paper we describe how a variety of sigmoid curves can be fit using the Mplus structural modeling program and the non-linear mixed-effects modeling procedure NLMIXED in SAS. Using longitudinal achievement data collected as part of a study examining the effects of preschool instruction on academic gain we illustrate the procedures for fitting growth models of logistic, Gompertz, and Richards functions. Brief notes regarding the practical benefits, limitations, and choices faced in the fitting and estimation of such models are included. PMID:23882134

SPSS and SAS programs for generalizability theory analyses.

Science.gov (United States)

Mushquash, Christopher; O'Connor, Brian P

2006-08-01

The identification and reduction of measurement errors is a major challenge in psychological testing. Most investigators rely solely on classical test theory for assessing reliability, whereas most experts have long recommended using generalizability theory instead. One reason for the common neglect of generalizability theory is the absence of analytic facilities for this purpose in popular statistical software packages. This article provides a brief introduction to generalizability theory, describes easy to use SPSS, SAS, and MATLAB programs for conducting the recommended analyses, and provides an illustrative example, using data (N = 329) for the Rosenberg Self-Esteem Scale. Program output includes variance components, relative and absolute errors and generalizability coefficients, coefficients for D studies, and graphs of D study results.

Appraisal for Japan of the safety of transport of radioactive material. Provision for the application of the IAEA safety standards

International Nuclear Information System (INIS)

2006-01-01

The IAEA's Statute authorizes it to provide for the application of its standards at the request of any State. The objective of a TranSAS appraisal is to assist any requesting State to achieve a high level of safety in the transport of radioactive material by reviewing its implementation of the Transport Regulations and by making recommendations for improvement where appropriate.The IAEA discharges this statutory function through a number of mechanisms, including rendering independent peer review appraisal services to determine the status of compliance with its standards. The appraisal for Japan in December 2005 on the safety of the transport of radioactive material is the seventh TranSAS mission since the inception of the service. This report presents its findings. The TranSAS appraisal team completed a comprehensive appraisal of the implementation of the Transport Regulations in Japan. The cooperation of the authorities in Japan, and of all those who participated in the discussions, was excellent and contributed to the success of the appraisal. The comprehensive legal framework, with responsibilities identified in considerable detail and with clear lines of authority to minimize overlap of responsibilities, provides a sound basis for the implementation of the Transport Regulations. Generally, the Transport Regulations are implemented in accordance with IAEA requirements. Some areas for possible improvement have been identified. These areas relate mainly to reduction of regulations, quality management systems, training, compliance assurance and lessening the administrative burden for incorporating amendments to the IMDG Code. The findings include a considerable number of good practices, in particular in the area of maritime transport

76 FR 20070 - Commercial Space Transportation Safety Approval Performance Criteria

Science.gov (United States)

2011-04-11

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Commercial Space Transportation... Commercial Space Transportation (AST), 800 Independence Avenue SW., Room 331, Washington, DC 20591, telephone.... Nield, Associate Administrator for Commercial Space Transportation. [FR Doc. 2011-8534 Filed 4-8-11; 8...

Interactive Atlas of Heart Disease and Stroke

Science.gov (United States)

... Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies ...

Find a Diabetes Prevention Program Near You

Science.gov (United States)

... Word file Microsoft Excel file Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file RIS file Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies ...

75 FR 26746 - ONEOK Westex Transmission, L.L.C.; Notice of Baseline Filing

Science.gov (United States)

2010-05-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR10-19-000] ONEOK Westex Transmission, L.L.C.; Notice of Baseline Filing May 5, 2010. Take notice that on April 29, 2010, ONEOK Westex Transmission, L.L.C. submitted its baseline filing of its Statement of Operating Conditions for transportation...

Design and implementation of reliability evaluation of SAS hard disk based on RAID card

Science.gov (United States)

Ren, Shaohua; Han, Sen

2015-10-01

Because of the huge advantage of RAID technology in storage, it has been widely used. However, the question associated with this technology is that the hard disk based on the RAID card can not be queried by Operating System. Therefore how to read the self-information and log data of hard disk has been a problem, while this data is necessary for reliability test of hard disk. In traditional way, this information can be read just suitable for SATA hard disk, but not for SAS hard disk. In this paper, we provide a method by using LSI RAID card's Application Program Interface, communicating with RAID card and analyzing the feedback data to solve the problem. Then we will get the necessary information to assess the SAS hard disk.

BAM! Body and Mind

Science.gov (United States)

... sun safety too!! Check out our “Ask A Scientist” comic series to learn more! table captioned Ask ... Audio/Video file Apple Quicktime file RealPlayer file Text file Zip Archive file SAS file ePub file ...

An improved algorithm to convert CAD model to MCNP geometry model based on STEP file

International Nuclear Information System (INIS)

Zhou, Qingguo; Yang, Jiaming; Wu, Jiong; Tian, Yanshan; Wang, Junqiong; Jiang, Hai; Li, Kuan-Ching

2015-01-01

Highlights: • Fully exploits common features of cells, making the processing efficient. • Accurately provide the cell position. • Flexible to add new parameters in the structure. • Application of novel structure in INP file processing, conveniently evaluate cell location. - Abstract: MCNP (Monte Carlo N-Particle Transport Code) is a general-purpose Monte Carlo N-Particle code that can be used for neutron, photon, electron, or coupled neutron/photon/electron transport. Its input file, the INP file, has the characteristics of complicated form and is error-prone when describing geometric models. Due to this, a conversion algorithm that can solve the problem by converting general geometric model to MCNP model during MCNP aided modeling is highly needed. In this paper, we revised and incorporated a number of improvements over our previous work (Yang et al., 2013), which was proposed and targeted after STEP file and INP file were analyzed. Results of experiments show that the revised algorithm is more applicable and efficient than previous work, with the optimized extraction of geometry and topology information of the STEP file, as well as the production efficiency of output INP file. This proposed research is promising, and serves as valuable reference for the majority of researchers involved with MCNP-related researches

Composites reinforcement by rods a SAS study

CERN Document Server

Urban, V; Pyckhout-Hintzen, W; Richter, D; Straube, E

2002-01-01

The mechanical properties of composites are governed by size, shape and dispersion degree of so-called reinforcing particles. Polymeric fillers based on thermodynamically driven microphase separation of block copolymers offer the opportunity to study a model system of controlled rod-like filler particles. We chose a triblock copolymer (PBPSPB) and carried out SAS measurements with both X-rays and neutrons, in order to characterize separately the hard phase and the cross-linked PB matrix. The properties of the material depend strongly on the way that stress is carried and transferred between the soft matrix and the hard fibers. The failure of the strain-amplification concept and the change of topological contributions to the free energy and scattering factor have to be addressed. In this respect the composite shows a similarity to a two-network system, i.e. interpenetrating rubber and rod-like filler networks. (orig.)

78 FR 37648 - Space Transportation Infrastructure Matching (STIM) Grants Program

Science.gov (United States)

2013-06-21

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Space Transportation Infrastructure...-availability of Space Transportation Infrastructure Matching Grants in FY 2013. SUMMARY: The Office of... Administrator for Commercial Space Transportation. [FR Doc. 2013-14859 Filed 6-20-13; 8:45 am] BILLING CODE 4910...

A brief overview of the European Fusion File (EFF) project

International Nuclear Information System (INIS)

Kellett, M.A.; Forrest, R.A.; Batistoni, P.

2003-01-01

The European Fusion File (EFF) Project is a collaborative project with work funded by the European Fusion Development Agreement (EFDA). The emphasis is on the pooling of resources and removal of duplication of effort, leading to the efficient development of two types of nuclear data libraries for use in fusion power plant design and operation studies. The two branches consist of, on the one hand, a transport file for modelling and design capabilities and, secondly, an activation file for the calculation and simulation of dose rates and energy release during operation of a future power plant. The OECD Nuclear Energy Agency's Data Bank acts as the central repository for the files and all information discussed during twice yearly meetings. It offers its services at no charge to the Project. (author)

A brief overview of the European Fusion File (EFF) project

International Nuclear Information System (INIS)

Kellett, M.A.

2002-01-01

The European Fusion File (EFF) Project is a collaborative project with work funded by the European Fusion Development Agreement (EFDA). The emphasis is on the pooling of resources and removal of duplication of effort, leading to the efficient development of two types of nuclear data libraries for use in fusion reactor design and operation work. The two branches consist of, on the one hand, a transport file for modelling and design capabilities and, secondly, an activation file for the calculation and simulation of dose rates and energy release during operation of a future reactor. The OECD Nuclear Energy Agency's Data Bank acts as the central repository for the files and all information discussed during twice yearly meetings, which it holds, offering its services at no charge to the Project. (author)

A SAS macro for testing differences among three or more independent groups using Kruskal-Wallis and Nemenyi tests.

Science.gov (United States)

Liu, Yuewei; Chen, Weihong

2012-02-01

As a nonparametric method, the Kruskal-Wallis test is widely used to compare three or more independent groups when an ordinal or interval level of data is available, especially when the assumptions of analysis of variance (ANOVA) are not met. If the Kruskal-Wallis statistic is statistically significant, Nemenyi test is an alternative method for further pairwise multiple comparisons to locate the source of significance. Unfortunately, most popular statistical packages do not integrate the Nemenyi test, which is not easy to be calculated by hand. We described the theory and applications of the Kruskal-Wallis and Nemenyi tests, and presented a flexible SAS macro to implement the two tests. The SAS macro was demonstrated by two examples from our cohort study in occupational epidemiology. It provides a useful tool for SAS users to test the differences among three or more independent groups using a nonparametric method.

Adaptation and Validation of the Sexual Assertiveness Scale (SAS) in a Sample of Male Drug Users.

Science.gov (United States)

Vallejo-Medina, Pablo; Sierra, Juan Carlos

2015-04-21

The aim of the present study was to adapt and validate the Sexual Assertiveness Scale (SAS) in a sample of male drug users. A sample of 326 male drug users and 322 non-clinical males was selected by cluster sampling and convenience sampling, respectively. Results showed that the scale had good psychometric properties and adequate internal consistency reliability (Initiation = .66, Refusal = .74 and STD-P = .79). An evaluation of the invariance showed strong factor equivalence between both samples. A high and moderate effect of Differential Item Functioning was only found in items 1 and 14 (∆R 2 Nagelkerke = .076 and .037, respectively). We strongly recommend not using item 1 if the goal is to compare the scores of both groups, otherwise the comparison will be biased. Correlations obtained between the CSFQ-14 and the safe sex ratio and the SAS subscales were significant (CI = 95%) and indicated good concurrent validity. Scores of male drug users were similar to those of non-clinical males. Therefore, the adaptation of the SAS to drug users provides enough guarantees for reliable and valid use in both clinical practice and research, although care should be taken with item 1.

Control of unidirectional transport of single-file water molecules through carbon nanotubes in an electric field.

Science.gov (United States)

Su, Jiaye; Guo, Hongxia

2011-01-25

The transport of water molecules through nanopores is not only crucial to biological activities but also useful for designing novel nanofluidic devices. Despite considerable effort and progress that has been made, a controllable and unidirectional water flow is still difficult to achieve and the underlying mechanism is far from being understood. In this paper, using molecular dynamics simulations, we systematically investigate the effects of an external electric field on the transport of single-file water molecules through a carbon nanotube (CNT). We find that the orientation of water molecules inside the CNT can be well-tuned by the electric field and is strongly coupled to the water flux. This orientation-induced water flux is energetically due to the asymmetrical water-water interaction along the CNT axis. The wavelike water density profiles are disturbed under strong field strengths. The frequency of flipping for the water dipoles will decrease as the field strength is increased, and the flipping events vanish completely for the relatively large field strengths. Most importantly, a critical field strength E(c) related to the water flux is found. The water flux is increased as E is increased for E ≤ E(c), while it is almost unchanged for E > E(c). Thus, the electric field offers a level of governing for unidirectional water flow, which may have some biological applications and provides a route for designing efficient nanopumps.

Plan empresa Publitis S.A.S: soluciones tecnológicas

OpenAIRE

Robledo Ceballos, Carlos Alberto; Rodríguez Velasco, Salvador

2011-01-01

RESUMEN: PubliTICs es una empresa de constitución privada creada bajo la reglamentación emitida para las Sociedades por Acciones Simplificadas, cuyo objeto principal es la prestación de servicios de Tecnologías de la Información y las Comunicaciones en el mercado de Colombia. PubliTICs S.A.S celebrará un contrato de Aliado Tecnológico y Comercial con las Empresas Municipales de Cali EMCALI EICE ESP, para prestar servicios de soluciones tecnológicas empresariales, aprovechando la infraestru...

O papel do community manager Toluna SAS: comunidade online interativa

OpenAIRE

Faria, Filipa Maria Ferreira Prego de

2014-01-01

Atualmente, a maioria das empresas encontra-se ligada a uma das ferramentas mais poderosas do mundo: a internet. Com o crescimento deste fenómeno, surgem aplicativos para melhorarem o seu aproveitamento. As empresas começam a usufruir da Web 2.0, que visa a utilização da internet como uma plataforma social. O trabalho aqui apresentado pretende fazer uma análise profunda da empresa online Toluna SAS e explicar o surgimento do profissional responsável por essa plataforma social, o Community Man...

Simulation of Thermal Neutron Transport Processes Directly from the Evaluated Nuclear Data Files

Science.gov (United States)

Androsenko, P. A.; Malkov, M. R.

The main idea of the method proposed in this paper is to directly extract thetrequired information for Monte-Carlo calculations from nuclear data files. The met od being developed allows to directly utilize the data obtained from libraries and seehs to be the most accurate technique. Direct simulation of neutron scattering in themmal energy range using file 7 ENDF-6 format in terms of code system BRAND has beer achieved. Simulation algorithms have been verified using the criterion x2

Using electronic document management systems to manage highway project files.

Science.gov (United States)

2011-12-12

"WisDOTs Bureau of Technical Services is interested in learning about the practices of other state departments of : transportation in developing and implementing an electronic document management system to manage highway : project files"

Identificación de Prácticas Empresariales para el Mejoramiento Continuo en Plusagro S.A.S.

OpenAIRE

Martín Correal, Alvaro Steven

2014-01-01

Este proyecto que se llevara a cabo en la compañía Plusagro S.A.S. la cual busca mejorar de forma sustancial la cultura organizacional de la compañía, para que desarrolle al máximo las ventajas competitivas que encuentra en el mercado, una de estas grandes ventajas es que al tener la exclusividad de su proveedor principal Kursan. Se vuelve de suma importancia saber que existen otras marcas en el mercado de los productos agrícolas que ofrece Plusagro S.A.S. pero se ha encontrado en común acuer...

Decay data file based on the ENSDF file

Energy Technology Data Exchange (ETDEWEB)

Katakura, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-03-01

A decay data file with the JENDL (Japanese Evaluated Nuclear Data Library) format based on the ENSDF (Evaluated Nuclear Structure Data File) file was produced as a tentative one of special purpose files of JENDL. The problem using the ENSDF file as primary source data of the JENDL decay data file is presented. (author)

Determining hyporheic storage using the rSAS model in urban restored streams.

Science.gov (United States)

Stoll, E.; Putnam, S. M.; Cosans, C.; Harman, C. J.

2017-12-01

One aim of stream restoration is to increase the connectivity of the stream with the hyporheic zone, which is important for processes like denitrification. This study analyzed transects of different restoration techniques in an urban stream, Stony Run in Baltimore, Maryland. The extent of the hyporheic zone was determined using a combination of salt slug injection tracer studies to determine the breakthrough curves and the rank StorAge Selection (rSAS) model. Previous studies using salt tracer injections have often focused on the shape of the breakthrough curve and the transit time distributions of streams to infer indicies correlated with hyporheic zone storage. This study uses the rSAS model to determine the volume of storage that must be turning over to produce the breakthrough curve. This study looked at transects of two different restoration techniques, one with floodplain rehabilitation and one without. Both transects had cross vanes and pool and riffle systems and only differed in the steepness of the banks surrounding the stream. The utility and accuracy of rSAS method was found to be heavily dependent on accurate flow rates. To avoid potential skew in the results, normalized, relatively flow rate-independent metric of storage were compared among transects to reduce error resulting from the flow rate. The results suggested that stream water was retained for longer in a larger storage volume in the transect that did not have floodplain rehabilitation. When compared to the storage of a natural stream with similar geomorphologic characteristics, the restored transect without floodplain rehabilitation had a larger storage volume than the natural stream. The restored transect with floodplain rehabilitation not only had a smaller storage volume than the restored section without rehabilitation, but also had a smaller storage volume than the natural stream with similar bank slopes. This suggests that the floodplain restoration does not significantly contribute to

Cerebral scintigraphy by 99mTc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state

International Nuclear Information System (INIS)

Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B.

1997-01-01

The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of 99m Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a 'riddly' aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

International Nuclear Information System (INIS)

Tveten, U.

1999-02-01

The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway

Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

Energy Technology Data Exchange (ETDEWEB)

Tveten, U

1999-02-01

The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway.

FY2017 Updates to the SAS4A/SASSYS-1 Safety Analysis Code

Energy Technology Data Exchange (ETDEWEB)

Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-30

The SAS4A/SASSYS-1 safety analysis software is used to perform deterministic analysis of anticipated events as well as design-basis and beyond-design-basis accidents for advanced fast reactors. It plays a central role in the analysis of U.S. DOE conceptual designs, proposed test and demonstration reactors, and in domestic and international collaborations. This report summarizes the code development activities that have taken place during FY2017. Extensions to the void and cladding reactivity feedback models have been implemented, and Control System capabilities have been improved through a new virtual data acquisition system for plant state variables and an additional Block Signal for a variable lag compensator to represent reactivity feedback for novel shutdown devices. Current code development and maintenance needs are also summarized in three key areas: software quality assurance, modeling improvements, and maintenance of related tools. With ongoing support, SAS4A/SASSYS-1 can continue to fulfill its growing role in fast reactor safety analysis and help solidify DOE’s leadership role in fast reactor safety both domestically and in international collaborations.

75 FR 10341 - Aviation Proceedings, Agreements Filed the Week Ending February 13, 2010

Science.gov (United States)

2010-03-05

... International Air Transport Association. Subject: Mail Vote 622. TC3 Within South East Asia, Special Passenger...: Members of the International Air Transport Association. Subject: Mail Vote 621. Special Passenger Amending... Number: DOT-OST-2010-0032. Date Filed: February 9, 2010. Parties: Members of the International Air...

76 FR 47577 - Enstor Grama Ridge Storage and Transportation, L.L.C.; Enstor Katy Storage and Transportation, L...

Science.gov (United States)

2011-08-05

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR10-97-003; Docket No. PR10-101-003; Not Consolidated] Enstor Grama Ridge Storage and Transportation, L.L.C.; Enstor Katy Storage and Transportation, L.P.; Notice of Filing Take notice that on July 29, 2011, the applicants listed...

Cerebral scintigraphy by {sup 99m}Tc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state; Scintigraphie cerebrale au Tc99m-HMPAO dans les syndromes d`apnees du sommeil (SAS) pendant l`etat de veille

Energy Technology Data Exchange (ETDEWEB)

Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B. [CMC FOCH 92150 SURESNES (France)

1997-12-31

The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of {sup 99m}Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a `riddly` aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

Development and psychometric properties of the Suicidality: Treatment Occurring in Paediatrics (STOP) Suicidality Assessment Scale (STOP-SAS) in children and adolescents.

Science.gov (United States)

Flamarique, I; Santosh, P; Zuddas, A; Arango, C; Purper-Ouakil, D; Hoekstra, P J; Coghill, D; Schulze, U; Dittmann, R W; Buitelaar, J K; Lievesley, K; Frongia, R; Llorente, C; Méndez, I; Sala, R; Fiori, F; Castro-Fornieles, J

2016-12-13

To create a self-reported, internet-based questionnaire for the assessment of suicide risk in children and adolescents. As part of the EU project 'Suicidality: Treatment Occurring in Paediatrics' (STOP project), we developed web-based Patient Reported Outcome Measures (PROMs) for children and adolescents and for proxy reports by parents and clinicians in order to assess suicidality. Based on a literature review, expert panels and focus groups of patients, we developed the items of the STOP Suicidality Assessment Scale (STOP-SAS) in Spanish and English, translated it into four more languages, and optimized it for web-based presentation using the HealthTracker TM platform. Of the total 19 questions developed for the STOP-SAS, four questions that assess low-level suicidality were identified as screening questions (three of them for use with children, and all four for use with adolescents, parents and clinicians). A total of 395 adolescents, 110 children, 637 parents and 716 clinicians completed the questionnaire using the HealthTracker TM , allowing us to evaluate the internal consistency and convergent validity of the STOP-SAS with the clinician-rated Columbia Suicide Severity Rating Scale (C-SSRS). Validity was also assessed with the receiver operating characteristic (ROC) area of the STOP-SAS with the C-SSRS. The STOP-SAS comprises 19 items in its adolescent, parent, and clinician versions, and 14 items in its children's version. Good internal consistency was found for adolescents (Cronbach's alpha: 0.965), children (Cronbach's alpha: 0.922), parents (Cronbach's alpha: 0.951) and clinicians (Cronbach's alpha: 0.955) versions. A strong correlation was found between the STOP-SAS and the C-SSRS for adolescents (r:0.670), parents (r:0.548), clinicians (r:0.863) and children (r:0.654). The ROC area was good for clinicians' (0.917), adolescents' (0.834) and parents' (0.756) versions but only fair (0.683) for children's version. The STOP-SAS is a comprehensive, web

Implementation, verification, and validation of the FPIN2 metal fuel pin mechanics model in the SASSYS/SAS4A LMR transient analysis codes

International Nuclear Information System (INIS)

Sofu, T.; Kramer, J.M.

1994-01-01

The metal fuel version of the FPIN2 code which provides a validated pin mechanics model is coupled with SASSYS/SAS4A Version 3.0 for single pin calculations. In this implementation, SASSY/SAS4A provides pin temperatures, and FPIN2 performs analysis of pin deformation and predicts the time and location of cladding failure. FPIN2 results are also used for the estimates of axial expansion of fuel and associated reactivity effects. The revalidation of the integrated SAS-FPIN2 code system is performed using TREAT tests

Effect of repetitive pecking at working length for glide path preparation using G-file

Directory of Open Access Journals (Sweden)

Jung-Hong Ha

2015-05-01

Full Text Available Objectives Glide path preparation is recommended to reduce torsional failure of nickel-titanium (NiTi rotary instruments and to prevent root canal transportation. This study evaluated whether the repetitive insertions of G-files to the working length maintain the apical size as well as provide sufficient lumen as a glide path for subsequent instrumentation. Materials and Methods The G-file system (Micro-Mega composed of G1 and G2 files for glide path preparation was used with the J-shaped, simulated resin canals. After inserting a G1 file twice, a G2 file was inserted to the working length 1, 4, 7, or 10 times for four each experimental group, respectively (n = 10. Then the canals were cleaned by copious irrigation, and lubricated with a separating gel medium. Canal replicas were made using silicone impression material, and the diameter of the replicas was measured at working length (D0 and 1 mm level (D1 under a scanning electron microscope. Data was analysed by one-way ANOVA and post-hoc tests (p = 0.05. Results The diameter at D0 level did not show any significant difference between the 1, 2, 4, and 10 times of repetitive pecking insertions of G2 files at working length. However, 10 times of pecking motion with G2 file resulted in significantly larger canal diameter at D1 (p < 0.05. Conclusions Under the limitations of this study, the repetitive insertion of a G2 file up to 10 times at working length created an adequate lumen for subsequent apical shaping with other rotary files bigger than International Organization for Standardization (ISO size 20, without apical transportation at D0 level.

Social Anxiety Scale for Adolescents (SAS-A: Psychometric properties in a Spanish-speaking population

Directory of Open Access Journals (Sweden)

José Olivares

2005-01-01

Full Text Available El objetivo de este estudio instrumental fue estudiar la estructura factorial y propiedades psicométricas de la Escala de Ansiedad Social para Adolescentes (SASA. Participaron 2407 adolescentes (1263 chicos y 1144 chicas, con una edad media de 15 años, alumnos de nueve institutos de la región de Murcia. Los resultados obtenidos apoyan la estructura tri-factorial propuesta por los autores de la escala (FNE, SAD-New, SAD-General. Se encontraron correlaciones interescalas significativas y niveles de consistencia interna elevados para las subescalas, así como respecto de los efectos del sexo en la puntuación SAS-A/Total y en sus subescalas, alcanzando las chicas las puntuaciones más elevadas. Sólo se hallaron diferencias significativas para la edad en la subescala FNE y no se constataron efectos de interacción entre los dos factores. Estos hallazgos parecen avalar el uso de la SAS-A en población adolescente de habla española.

Riik võib lüüa SAS-i esmaspäevaks Estonian Airi omanikeringist välja / Erik Müürsepp, Mikk Salu

Index Scriptorium Estoniae

Müürsepp, Erik

2008-01-01

SAS osaleb Estonian Airþile lisakapitali eraldamises ainult juhul, kui Eesti riik müüb oma osaluses lennukompaniis SAS-ile. Peaminister Andrus Ansipi ning majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

Analysis of the TREAT loss-of-flow tests L6 and L7 using SAS3D

International Nuclear Information System (INIS)

Morris, E.E.; Simms, R.; Gruber, E.E.

1985-01-01

The TREAT loss-of-flow tests L6 and L7 have been analyzed using the SAS3D accident analysis code. The impetus for the analysis was the need for experimentally supported fuel motion modeling in whole core accident studies performed in support of licensing of the Clinch River Breeder Reactor Project. The input prescription chosen for the SAS3D/SLUMPY fuel motion model gave reasonable agreement with the test results. Tests L6 and L7, each conducted with a cluster of three fuel pins, were planned to simulate key events in the loss-of-flow accident scenario for the Clinch River homogeneous reactor

Pravděpodobnostní rozdělení v programu SAS

OpenAIRE

Rosypal, Martin

2009-01-01

The aim of this work is to elaborate the metodology of creation of custom add-ins for statistical application SAS Enterprise Guide and create one of these that would enable to simplify the calculation of quantiles, values of probability mass function (probability density function respectively) and cumulative distribution function and further based on user's specifications create an appropriate graph. In connection with content of this add-in, the presented work includes the recherche from bac...

Modification to the Monte N-Particle (MCNP) Visual Editor (MCNPVised) to read in Computer Aided Design (CAD) files

International Nuclear Information System (INIS)

Schwarz, Randy A.; Carter, Leeland L.

2004-01-01

Monte Carlo N-Particle Transport Code (MCNP) (Reference 1) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle (References 2 to 11) is recognized internationally as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant enhanced the capabilities of the MCNP Visual Editor to allow it to read in a 2D Computer Aided Design (CAD) file, allowing the user to modify and view the 2D CAD file and then electronically generate a valid MCNP input geometry with a user specified axial extent

Comparison of SAS3A and MELT-III predictions for a transient overpower hypothetical accident

International Nuclear Information System (INIS)

Wilburn, N.P.

1976-01-01

A comparison is made of the predictions of the two major codes SAS3A and MELT-III for the hypothetical unprotected transient overpower accident in the FFTF. The predictions of temperatures, fuel restructuring, fuel melting, reactivity feedbacks, and core power are compared

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

Science.gov (United States)

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Ordinance concerning the filing of transport of nuclear fuel materials

International Nuclear Information System (INIS)

1987-01-01

This Order provides provisions concerning nuclear fuel substances requiring notification (nuclear fuel substance, material contaminated with nuclear fuel substances, fissionable substances, etc.), procedure for notification (to prefectural public safety commission), certificate of transpot (issued via public safety commission), instructions (speed of vehicle for transporting nuclear fuel substances, parking of vehicle, place for loading and unloading of nuclear fuel substances, method for loading and unloading, report to police, measures for disaster prevention during transport, etc.), communication among members of public safety commission (for smooth transport), notification of alteration of data in transport certificate (application to be submitted to public safety commission), application of reissue of transport certificate, return of transport certificate, inspection concerning transport (to be performed by police), submission of report (to be submitted by refining facilities manager, processing facilities manager, nuclear reactor manager, master of foreign nuclear powered ship, reprocessing facilities manager, waste disposal facilities manager; concerning stolen or missing nuclear fuel substances, traffic accident, unusual leakage of nuclear fuel substances, etc.). (Nogami, K.)

78 FR 53001 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-08-27

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... announced herein for the listed public transportation project will be barred unless the claim is filed on or... issuing certain approvals for the public transportation projects listed below. The actions on the projects...

78 FR 23817 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-04-22

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... announced herein for the listed public transportation project will be barred unless the claim is filed on or... issuing certain approvals for the public transportation projects listed below. The actions on the projects...

Accessing files in an Internet: The Jade file system

Science.gov (United States)

Peterson, Larry L.; Rao, Herman C.

1991-01-01

Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

Accessing files in an internet - The Jade file system

Science.gov (United States)

Rao, Herman C.; Peterson, Larry L.

1993-01-01

Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

PHAST--a program for simulating ground-water flow, solute transport, and multicomponent geochemical reactions

Science.gov (United States)

Parkhurst, David L.; Kipp, Kenneth L.; Engesgaard, Peter; Charlton, Scott R.

2004-01-01

The computer program PHAST simulates multi-component, reactive solute transport in three-dimensional saturated ground-water flow systems. PHAST is a versatile ground-water flow and solute-transport simulator with capabilities to model a wide range of equilibrium and kinetic geochemical reactions. The flow and transport calculations are based on a modified version of HST3D that is restricted to constant fluid density and constant temperature. The geochemical reactions are simulated with the geochemical model PHREEQC, which is embedded in PHAST. PHAST is applicable to the study of natural and contaminated ground-water systems at a variety of scales ranging from laboratory experiments to local and regional field scales. PHAST can be used in studies of migration of nutrients, inorganic and organic contaminants, and radionuclides; in projects such as aquifer storage and recovery or engineered remediation; and in investigations of the natural rock-water interactions in aquifers. PHAST is not appropriate for unsaturated-zone flow, multiphase flow, density-dependent flow, or waters with high ionic strengths. A variety of boundary conditions are available in PHAST to simulate flow and transport, including specified-head, flux, and leaky conditions, as well as the special cases of rivers and wells. Chemical reactions in PHAST include (1) homogeneous equilibria using an ion-association thermodynamic model; (2) heterogeneous equilibria between the aqueous solution and minerals, gases, surface complexation sites, ion exchange sites, and solid solutions; and (3) kinetic reactions with rates that are a function of solution composition. The aqueous model (elements, chemical reactions, and equilibrium constants), minerals, gases, exchangers, surfaces, and rate expressions may be defined or modified by the user. A number of options are available to save results of simulations to output files. The data may be saved in three formats: a format suitable for viewing with a text editor; a

Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography -An In Vitro Study.

Science.gov (United States)

Dhingra, Annil; Ruhal, Nidhi; Miglani, Anjali

2015-04-01

Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness.

76 FR 51469 - CSX Transportation, Inc.-Abandonment Exemption-in Beaver County, PA

Science.gov (United States)

2011-08-18

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 55 (Sub-No. 708X)] CSX Transportation, Inc.--Abandonment Exemption--in Beaver County, PA CSX Transportation, Inc. (CSXT) has filed a... milepost PLK 2.39, in Koppel, Beaver County, Pa. The line traverses United States Postal Service Zip Code...

77 FR 71475 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-11-30

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... public transportation project will be barred unless the claim is filed on or before April 29, 2013. FOR... the public transportation projects listed below. The actions on the projects, as well as the laws...

77 FR 43144 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-07-23

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... public transportation project will be barred unless the claim is filed on or before January 21, 2013. FOR... the public transportation projects listed below. The actions on these projects, as well as the laws...

Proteomic analysis of cellular response induced by boron neutron capture reaction in human squamous cell carcinoma SAS cells

International Nuclear Information System (INIS)

Sato, Akira; Itoh, Tasuku; Imamichi, Shoji; Kikuhara, Sota; Fujimori, Hiroaki; Hirai, Takahisa; Saito, Soichiro; Sakurai, Yoshinori; Tanaka, Hiroki; Nakamura, Hiroyuki; Suzuki, Minoru

2015-01-01

To understand the mechanism of cell death induced by boron neutron capture reaction (BNCR), we performed proteome analyses of human squamous tumor SAS cells after BNCR. Cells were irradiated with thermal neutron beam at KUR after incubation under boronophenylalanine (BPA)(+) and BPA(−) conditions. BNCR mainly induced typical apoptosis in SAS cells 24 h post-irradiation. Proteomic analysis in SAS cells suggested that proteins functioning in endoplasmic reticulum, DNA repair, and RNA processing showed dynamic changes at early phase after BNCR and could be involved in the regulation of cellular response to BNCR. We found that the BNCR induces fragments of endoplasmic reticulum-localized lymphoid-restricted protein (LRMP). The fragmentation of LRMP was also observed in the rat tumor graft model 20 hours after BNCT treatment carried out at the National Nuclear Center of the Republic of Kazakhstan. These data suggest that dynamic changes of LRMP could be involved during cellular response to BNCR. - Highlights: • BNCR in human squamous carcinoma cells caused typical apoptotic features. • BNCR induced fragments of LRMP, in human squamous carcinoma and rat tumor model. • The fragmentation of LRMP could be involved in cellular response to BNCR.

Canal transportation and centering ability of protaper and self-adjusting file system in long oval canals: An ex-vivo cone-beam computed tomography analysis.

Science.gov (United States)

Shah, Dipali Yogesh; Wadekar, Swati Ishwara; Dadpe, Ashwini Manish; Jadhav, Ganesh Ranganath; Choudhary, Lalit Jayant; Kalra, Dheeraj Deepak

2017-01-01

The purpose of this study was to compare and evaluate the shaping ability of ProTaper (PT) and Self-Adjusting File (SAF) system using cone-beam computed tomography (CBCT) to assess their performance in oval-shaped root canals. Sixty-two mandibular premolars with single oval canals were divided into two experimental groups ( n = 31) according to the systems used: Group I - PT and Group II - SAF. Canals were evaluated before and after instrumentation using CBCT to assess centering ratio and canal transportation at three levels. Data were statistically analyzed using one-way analysis of variance, post hoc Tukey's test, and t -test. The SAF showed better centering ability and lesser canal transportation than the PT only in the buccolingual plane at 6 and 9 mm levels. The shaping ability of the PT was best in the apical third in both the planes. The SAF had statistically significant better centering and lesser canal transportation in the buccolingual as compared to the mesiodistal plane at the middle and coronal levels. The SAF produced significantly less transportation and remained centered than the PT at the middle and coronal levels in the buccolingual plane of oval canals. In the mesiodistal plane, the performance of both the systems was parallel.

75 FR 54216 - CSX Transportation, Inc.-Abandonment Exemption―in Clay County, KY

Science.gov (United States)

2010-09-03

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. AB 55 (Sub-No. 704X)] CSX Transportation, Inc.--Abandonment Exemption[horbar]in Clay County, KY CSX Transportation, Inc. (CSXT) filed a... 0CF 208.71 to milepost 0CF 211.66, known as the Horse Creek Branch, in Manchester, Clay County, KY...

Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

International Nuclear Information System (INIS)

Dunn, F.E.

1981-01-01

The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study.

Science.gov (United States)

Agarwal, Rolly S; Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

2015-05-01

The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20(o) to 35(o) were divided into three groups of 20 samples each: ProTaper PT (group I) - full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO - single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey's honestly significant difference test. It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant. It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal transportation and centering ability comparable to full sequence

Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study

Science.gov (United States)

Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

2015-01-01

Background The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. Aim The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Materials and Methods Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20o to 35o were divided into three groups of 20 samples each: ProTaper PT (group I) – full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO – single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey’s honestly significant difference test. Results It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant Conclusion It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal

Review of US accident/incident experience involving the transportation of radioactive material (RAM) 1971-1980

International Nuclear Information System (INIS)

McClure, J.D.; Emerson, E.L.

1980-01-01

This paper analyzes the transportation accidents and incidents which have occurred in the United States in the period 1971-1980 based upon the information in the Radioactive Material Transportation Accident/Incident Data Base developed by the Transportation Technology Center (TTC) at Sandia National Laboratories. The accident/incident data base incorporates the files of the Hazardous Material Incident Report (HMIR) system operated by the Material Transportation Bureau of the US Department of Transportation (DOT) with additional information obtained from the files of the US Nuclear Regulatory Commission (NRC). A principal objective of this paper is to summarize US accident/incident experience for the past ten years, providing a concise statement of radioactive material (RAM) package failure description for the transport modes of truck, rail and air

Distribution of sasX, pvl, and qacA/B genes in epidemic methicillin-resistant Staphylococcus aureus strains isolated from East China

Directory of Open Access Journals (Sweden)

Kong H

2018-01-01

Full Text Available Haishen Kong,1,2 Lingmei Fang,3 Rujin Jiang,4 Jixiang Tong2 1State Key Laboratory for Diagnosis and Treatment of Infectious Diseases, Collaborative Innovation Center for Diagnosis and Treatment of Infectious Diseases, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 2Key Laboratory of Clinical In Vitro Diagnostic Techniques of Zhejiang Province, Department of Laboratory Medicine, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 3Clinical Laboratory, Chunan First People’s Hospital, Zhejiang Province People’s Hospital Chunan Branch, Hangzhou, China; 4Clinical Laboratory, Yuhang Hospital of Traditional Chinese Medicine, Hangzhou, China Background: Methicillin-resistant Staphylococcus aureus (MRSA is a major nosocomial pathogen. Various virulence and antiseptic-resistant factors increase the pathogenicity of MRSA strains and allow for increased infection rates.Purpose: The purpose of this study was to investigate the prevalence and distribution of virulence-associated and antiseptic-resistant genes from epidemic MRSA strains isolated from East China.Methods: A newly designed multiplex PCR assay was used to assess whether the virulence-associated genes sasX and pvl and the chlorhexidine tolerance gene qacA/B were present in 189 clinical isolates of MRSA. Multilocus sequence typing (MLST and Staphylococcal protein A (spa typing of these isolates were also performed. The frequency of these genes in isolates with epidemic sequence types (STs was investigated. Results: Twenty STs and 36 spa types with five epidemic clones (ST5-t311, ST59-t437, ST5-t002, ST239-t030, and ST239-t037 were identified. The prevalence of sasX, pvl, and qacA/B in all isolates was 5.8%, 10.1%, and 20.1%, respectively. The prevalences of these genes in isolates with ST5, ST59, ST239, and other ST genetic backgrounds were all significantly different (P<0.001. Isolates that had the highest frequency of sas

75 FR 37389 - Marine Mammals; File Nos. 14628 and 15471

Science.gov (United States)

2010-06-29

... parts for scientific research purposes:National Museum of Natural History, Smithsonian Institution... (16 U.S.C. 1151 et seq.). File No.14628: The National Museum of Natural History (NMNH) is requesting... health assessment studies in Punta San Juan, Peru. Samples may be archived, transported, and analyzed by...

Long term file migration. Part I: file reference patterns

International Nuclear Information System (INIS)

Smith, A.J.

1978-08-01

In most large computer installations, files are moved between on-line disk and mass storage (tape, integrated mass storage device) either automatically by the system or specifically at the direction of the user. This is the first of two papers which study the selection of algorithms for the automatic migration of files between mass storage and disk. The use of the text editor data sets at the Stanford Linear Accelerator Center (SLAC) computer installation is examined through the analysis of thirteen months of file reference data. Most files are used very few times. Of those that are used sufficiently frequently that their reference patterns may be examined, about a third show declining rates of reference during their lifetime; of the remainder, very few (about 5%) show correlated interreference intervals, and interreference intervals (in days) appear to be more skewed than would occur with the Bernoulli process. Thus, about two-thirds of all sufficiently active files appear to be referenced as a renewal process with a skewed interreference distribution. A large number of other file reference statistics (file lifetimes, interference distributions, moments, means, number of uses/file, file sizes, file rates of reference, etc.) are computed and presented. The results are applied in the following paper to the development and comparative evaluation of file migration algorithms. 17 figures, 13 tables

Shaping ability of the conventional nickel-titanium and reciprocating nickel-titanium file systems: a comparative study using micro-computed tomography.

Science.gov (United States)

Hwang, Young-Hye; Bae, Kwang-Shik; Baek, Seung-Ho; Kum, Kee-Yeon; Lee, WooCheol; Shon, Won-Jun; Chang, Seok Woo

2014-08-01

This study used micro-computed tomographic imaging to compare the shaping ability of Mtwo (VDW, Munich, Germany), a conventional nickel-titanium file system, and Reciproc (VDW), a reciprocating file system morphologically similar to Mtwo. Root canal shaping was performed on the mesiobuccal and distobuccal canals of extracted maxillary molars. In the RR group (n = 15), Reciproc was used in a reciprocating motion (150° counterclockwise/30° clockwise, 300 rpm); in the MR group, Mtwo was used in a reciprocating motion (150° clockwise/30° counterclockwise, 300 rpm); and in the MC group, Mtwo was used in a continuous rotating motion (300 rpm). Micro-computed tomographic images taken before and after canal shaping were used to analyze canal volume change and the degree of transportation at the cervical, middle, and apical levels. The time required for canal shaping was recorded. Afterward, each file was analyzed using scanning electron microscopy. No statistically significant differences were found among the 3 groups in the time for canal shaping or canal volume change (P > .05). Transportation values of the RR and MR groups were not significantly different at any level. However, the transportation value of the MC group was significantly higher than both the RR and MR groups at the cervical and apical levels (P file deformation was observed for 1 file in group RR (1/15), 3 files in group MR (3/15), and 5 files in group MC (5/15). In terms of shaping ability, Mtwo used in a reciprocating motion was not significantly different from the Reciproc system. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

78 FR 41993 - Transport Handling Specialists, Inc.-Continuance in Control Exemption-RSL Railroad, LLC

Science.gov (United States)

2013-07-12

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35726] Transport Handling Specialists, Inc.--Continuance in Control Exemption--RSL Railroad, LLC Transport Handling Specialists, Inc. (THS), has filed a verified notice of exemption (Notice) under 49 CFR 1180.2(d)(2) to continue in...

75 FR 12328 - Application of Charter Air Transport, Inc. for Commuter Authority

Science.gov (United States)

2010-03-15

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Application of Charter Air Transport, Inc... interested persons to show cause why it should not issue an order finding Charter Air Transport, Inc., fit, willing, and able, and awarding it Commuter Air Carrier Authorization. DATES: Persons wishing to file...

Development and application of the automated Monte Carlo biasing procedure in SAS4

International Nuclear Information System (INIS)

Tang, J.S.; Broadhead, B.L.

1995-01-01

An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. (author)

76 FR 4150 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-01-24

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... public transportation project will be barred unless the claim is filed on or before July 25, 2011. FOR...

76 FR 55470 - Notice of Limitation on Claims Against Proposed Public Transportation Project

Science.gov (United States)

2011-09-07

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Project AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or...

75 FR 33296 - Columbia Gulf Transmission Company; Notice of Filing

Science.gov (United States)

2010-06-11

... Transmission Company; Notice of Filing June 2, 2010. Take notice that on May 20, 2010, Columbia Gulf..., pursuant to section 7(c) of the Natural Gas Act (NGA), for a certificate of public convenience and... of its existing transmission system to transport unprocessed gas (wet gas) near Centerville...

SAS4A and FPIN2X validation for slow ramp TOP accidents: experiments TS-1 and TS-2

International Nuclear Information System (INIS)

Hill, D.J.

1986-01-01

The purpose of this paper is to present further results in the series of experimental analyses being performed using SAS4A and FPIN2X in order to provide a systematic validation of these codes. The two experiments discussed here, TS-1 and TS-2, were performed by Westinghouse Hanford/Hanford Engineering Development Laboratory (WHC/HEDL) in the Transient Reactor Test (TREAT) Facility. They were slow ramp transient overpowers (TOPs) of ∼ 5 cent/s equivalent Fast Flux Test Facility (FFTF) ramp rate, single-pin experiments in flowing sodium loops. The good agreement found here adds significantly to the experimental data base that provides the foundation for SAS4A and FPIN2X validation. It also shows that prefailure internal fuel motion is a phenomenon that has to be correctly accounted for, not only as a potential inherent safety mechanism, but also before any accurate prediction of fuel failure and subsequent fuel motion and the associated reactivity effects can be made. This is also true for metal-fueled pins. This capability is provided by PINACLE, which is being incorporated into SAS4A

Integral transport computation of gamma detector response with the CPM2 code

International Nuclear Information System (INIS)

Jones, D.B.

1989-12-01

CPM-2 Version 3 is an enhanced version of the CPM-2 lattice physics computer code which supports the capabilities to (1) perform a two-dimensional gamma flux calculation and (2) perform Restart/Data file maintenance operations. The Gamma Calculation Module implemented in CPM-2 was first developed for EPRI in the CASMO-1 computer code by Studsvik Energiteknik under EPRI Agreement RP2352-01. The gamma transport calculation uses the CPM-HET code module to calculate the transport of gamma rays in two dimensions in a mixed cylindrical-rectangular geometry, where the basic fuel assembly and component regions are maintained in a rectangular geometry, but the fuel pins are represented as cylinders within a square pin cell mesh. Such a capability is needed to represent gamma transport in an essentially transparent medium containing spatially distributed ''black'' cylindrical pins. Under a subcontract to RP2352-01, RPI developed the gamma production and gamma interaction library used for gamma calculation. The CPM-2 gamma calculation was verified against reference results generated by Studsvik using the CASMO-1 program. The CPM-2 Restart/Data file maintenance capabilities provide the user with options to copy files between Restart/Data tapes and to purge files from the Restart/Data tapes

Adaptive Tests of Significance Using Permutations of Residuals with R and SAS

CERN Document Server

O'Gorman, Thomas W

2012-01-01

Provides the tools needed to successfully perform adaptive tests across a broad range of datasets Adaptive Tests of Significance Using Permutations of Residuals with R and SAS illustrates the power of adaptive tests and showcases their ability to adjust the testing method to suit a particular set of data. The book utilizes state-of-the-art software to demonstrate the practicality and benefits for data analysis in various fields of study. Beginning with an introduction, the book moves on to explore the underlying concepts of adaptive tests, including:Smoothing methods and normalizing transforma

75 FR 24940 - Acacia Natural Gas Corporation; Notice of Baseline Filing

Science.gov (United States)

2010-05-06

... Natural Gas Corporation (Acacia) submitted its baseline filing of its Statement of Operating Conditions for the interruptible transportation services provided under section 311(a)(2) of the Natural Gas... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR10-16-000] Acacia Natural...

75 FR 28599 - Acacia Natural Gas Corporation; Notice of Baseline Filing

Science.gov (United States)

2010-05-21

... Natural Gas Corporation (Acacia) submitted a corrected baseline filing of its Statement of Operating Conditions for the interruptible transportation services provided under section 311(a)(2) of the Natural Gas... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR10-16-002] Acacia Natural...

Canal shaping of different single-file systems in curved root canals

Directory of Open Access Journals (Sweden)

Maurizio D'Amario

2017-12-01

Full Text Available Background/Purpose: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega, with those observed after instrumentation with Reciproc (VDW and WaveOne (Dentsply-Maillefer reciprocating systems. Materials and methods: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45° were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25. A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed. Results: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P>0.05. All instruments maintained the original canal curvature well and were safe to use. Conclusion: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature. Keywords: canal curvature, canal straightening, endodontics, reciprocating motion, single file instrumentation

Cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context

Directory of Open Access Journals (Sweden)

Viviane Vedovato Silva-Rocha

Full Text Available Abstract Objective To present the process of cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context. Method The following stages were used: translation into Brazilian Portuguese by independent translators, elaboration of a synthesis version, back-translation, evaluation by experts and pretest with target population. Results All the stages of cross-cultural adaptation were completed, and in the majority of items evaluated, good concordance between experts was obtained (≥ 80%. Suggested adjustments were compiled into the consensus version by the two authors, with the resulting material being considered adequate in the pretest (and thus no further changes were needed. Termed as “Escala de Ansiedade Esportiva-2,” the final version was considered by the main author of the original scale as an official version in Brazilian Portuguese. Conclusions In view of the fulfilment of all steps suggested for the cross-cultural adaptation process, the SAS-2 is now available in Brazilian Portuguese to be tested for its psychometric qualities.

JENDL special purpose file

International Nuclear Information System (INIS)

Nakagawa, Tsuneo

1995-01-01

In JENDL-3,2, the data on all the reactions having significant cross section over the neutron energy from 0.01 meV to 20 MeV are given for 340 nuclides. The object range of application extends widely, such as the neutron engineering, shield and others of fast reactors, thermal neutron reactors and nuclear fusion reactors. This is a general purpose data file. On the contrary to this, the file in which only the data required for a specific application field are collected is called special purpose file. The file for dosimetry is a typical special purpose file. The Nuclear Data Center, Japan Atomic Energy Research Institute, is making ten kinds of JENDL special purpose files. The files, of which the working groups of Sigma Committee are in charge, are listed. As to the format of the files, ENDF format is used similarly to JENDL-3,2. Dosimetry file, activation cross section file, (α, n) reaction data file, fusion file, actinoid file, high energy data file, photonuclear data file, PKA/KERMA file, gas production cross section file and decay data file are described on their contents, the course of development and their verification. Dosimetry file and gas production cross section file have been completed already. As for the others, the expected time of completion is shown. When these files are completed, they are opened to the public. (K.I.)

OECD benchmark a of MOX fueled PWR unit cells using SAS2H, triton and mocup

International Nuclear Information System (INIS)

Ganda, F.; Greenspan, A.

2005-01-01

Three code systems are tested by applying them to calculate the OECD PWR MOX unit cell benchmark A. The codes tested are the SAS2H code sequence of the SCALE5 code package using 44 group library, MOCUP (MCNP4C + ORIGEN2), and the new TRITON depletion sequence of SCALE5 using 238 group cross sections generated using CENTRM with continuous energy cross sections. The burnup-dependent k ∞ and actinides concentration calculated by all three code-systems were found to be in good agreement with the OECD benchmark average results. Limited results were calculated also with the WIMS-ANL code package. WIMS-ANL was found to significantly under-predict k ∞ as well as the concentration of Pu 242 , consistently with the predictions of the WIMS-LWR reported by two of the OECD benchmark participants. Additionally, SAS2H is benchmarked against MOCUP for a hydride fuel containing unit cell, giving very satisfactory agreement. (authors)

77 FR 6624 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-02-08

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... for the listed public transportation project will be barred unless the claim is filed on or before... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 35939 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-06-20

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 60963 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-09-30

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or... the public transportation projects listed below. The actions on these projects, as well as the laws...

76 FR 19522 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-04-07

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... herein for the listed public transportation projects will be barred unless the claim is filed on or... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 72746 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-11-25

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... for the listed public transportation project will be barred unless the claim is filed on or before May... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

Several hPepT1-transported drugs are substrates of the Escherichia coli proton-coupled oligopeptide transporter YdgR.

Science.gov (United States)

Prabhala, Bala K; Aduri, Nanda G; Iqbal, Mazhar; Rahman, Moazur; Gajhede, Michael; Hansen, Paul R; Mirza, Osman

2017-06-01

Proton-dependent oligopeptide transporters (POTs) are secondary active transporters found in all kingdoms of life. POTs utilize the proton electrochemical gradient for the uptake of nutrient dipeptides and tripeptides. The human POT hPepT1 is known to transport a number of drugs. As part of ongoing studies on substrate specificities of POTs from Escherichia coli, our aim in this study was to investigate whether bacterial POTs could also transport these drugs. For this, we selected the common orally administered drugs sulpiride, bestatin, valacyclovir, ampicillin and oseltamivir, that are all transported by hPepT1. The transport of these drugs was evaluated using the prototypical POT YdgR from E. coli. The transport studies were pursued through combining cell-based assays with liquid chromatography-tandem mass spectrometric (LC-MS/MS) analysis. These investigations revealed that YdgR from E. coli is able to transport five (sulpiride, bestatin, valacyclovir, ampicillin and oseltamivir) drugs. Furthermore, cells not overexpressing YdgR were also able to transport these drugs in a POT-like manner. Orthologues of YdgR are found in several species in the gut microbiome; hence, our findings could have implications for further understanding about the interaction between gut microbes and orally administered drugs. Copyright © 2017 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

11 CFR 100.19 - File, filed or filing (2 U.S.C. 434(a)).

Science.gov (United States)

2010-01-01

... a facsimile machine or by electronic mail if the reporting entity is not required to file..., including electronic reporting entities, may use the Commission's website's on-line program to file 48-hour... the reporting entity is not required to file electronically in accordance with 11 CFR 104.18. [67 FR...

Storage of sparse files using parallel log-structured file system

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary; Torres, Aaron

2017-11-07

A sparse file is stored without holes by storing a data portion of the sparse file using a parallel log-structured file system; and generating an index entry for the data portion, the index entry comprising a logical offset, physical offset and length of the data portion. The holes can be restored to the sparse file upon a reading of the sparse file. The data portion can be stored at a logical end of the sparse file. Additional storage efficiency can optionally be achieved by (i) detecting a write pattern for a plurality of the data portions and generating a single patterned index entry for the plurality of the patterned data portions; and/or (ii) storing the patterned index entries for a plurality of the sparse files in a single directory, wherein each entry in the single directory comprises an identifier of a corresponding sparse file.

File Type Identification of File Fragments using Longest Common Subsequence (LCS)

Science.gov (United States)

Rahmat, R. F.; Nicholas, F.; Purnamawati, S.; Sitompul, O. S.

2017-01-01

Computer forensic analyst is a person in charge of investigation and evidence tracking. In certain cases, the file needed to be presented as digital evidence was deleted. It is difficult to reconstruct the file, because it often lost its header and cannot be identified while being restored. Therefore, a method is required for identifying the file type of file fragments. In this research, we propose Longest Common Subsequences that consists of three steps, namely training, testing and validation, to identify the file type from file fragments. From all testing results we can conlude that our proposed method works well and achieves 92.91% of accuracy to identify the file type of file fragment for three data types.

An alternative to the SAS2H/ORIGEN-S sequence to account for water-density effects in BWR systems

International Nuclear Information System (INIS)

Leal, L.C.; Hermann, O.W.; Ryman, J.C.; Broadhead, B.L.

1996-01-01

A scheme to generate one-group problem-dependent cross-section libraries for point-depletion calculations with the ORIGEN-S code was developed as an alternative to the SAS2H sequence of the SCALE code system. The methodology, named Automatic Rapid Processing (ARP), generates libraries by interpolating in SAS2H precomputed cross section libraries. The method has been used to generate ORIGEN-S cross section libraries on a personal computer resulting in a great reduction of computer time without a sacrifice of accuracy over that required by corresponding SAS2H calculations. The ARP scheme generates ORIGEN-S libraries by interpolating in burnup and enrichment for PWR assemblies. The intent of this work is to describe a procedure which extends the application of the ARP methodology to BWR assemblies by including the axial water-density effects in the generation of the ORIGEN-S cross-section libraries. The axial liquid- to-steam change of state in BWR systems leads to a variation in the water density and significant cross-section changes as a function of the water density. To account for the axial water-density changes in a SAS2H calculation, the water density is entered explicitly in the generation of the one-group ORIGEN-S cross-section libraries generated from the SCALE 27-group library. In its original version, ARP does not account for the effects of water-density variation in ORIGEN-S cross-section library generation, and, therefore, its application is restricted to systems for which the impact of this parameter is negligible. To update the ARP methodology to account for the water-density effect, a detailed study of the cross-section change with this parameter was performed with an 8 x 8 (General Electric) BWR assembly

Simple and flexible SAS and SPSS programs for analyzing lag-sequential categorical data.

Science.gov (United States)

O'Connor, B P

1999-11-01

This paper describes simple and flexible programs for analyzing lag-sequential categorical data, using SAS and SPSS. The programs read a stream of codes and produce a variety of lag-sequential statistics, including transitional frequencies, expected transitional frequencies, transitional probabilities, adjusted residuals, z values, Yule's Q values, likelihood ratio tests of stationarity across time and homogeneity across groups or segments, transformed kappas for unidirectional dependence, bidirectional dependence, parallel and nonparallel dominance, and significance levels based on both parametric and randomization tests.

Handling missing data in cluster randomized trials: A demonstration of multiple imputation with PAN through SAS

Directory of Open Access Journals (Sweden)

Jiangxiu Zhou

2014-09-01

Full Text Available The purpose of this study is to demonstrate a way of dealing with missing data in clustered randomized trials by doing multiple imputation (MI with the PAN package in R through SAS. The procedure for doing MI with PAN through SAS is demonstrated in detail in order for researchers to be able to use this procedure with their own data. An illustration of the technique with empirical data was also included. In this illustration thePAN results were compared with pairwise deletion and three types of MI: (1 Normal Model (NM-MI ignoring the cluster structure; (2 NM-MI with dummy-coded cluster variables (fixed cluster structure; and (3 a hybrid NM-MI which imputes half the time ignoring the cluster structure, and the other half including the dummy-coded cluster variables. The empirical analysis showed that using PAN and the other strategies produced comparable parameter estimates. However, the dummy-coded MI overestimated the intraclass correlation, whereas MI ignoring the cluster structure and the hybrid MI underestimated the intraclass correlation. When compared with PAN, the p-value and standard error for the treatment effect were higher with dummy-coded MI, and lower with MI ignoring the clusterstructure, the hybrid MI approach, and pairwise deletion. Previous studies have shown that NM-MI is not appropriate for handling missing data in clustered randomized trials. This approach, in addition to the pairwise deletion approach, leads to a biased intraclass correlation and faultystatistical conclusions. Imputation in clustered randomized trials should be performed with PAN. We have demonstrated an easy way for using PAN through SAS.

76 FR 25773 - Notice of Limitation on Claims Against Proposed Public Transportation Project

Science.gov (United States)

2011-05-05

... Proposed Public Transportation Project AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice of... announced herein for the listed public transportation project will be barred unless the claim is filed on or... approvals for the public transportation project listed below. The actions on this project, as well as the...

Cut-and-Paste file-systems: integrating simulators and file systems

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1995-01-01

We have implemented an integrated and configurable file system called the Pegasus filesystem (PFS) and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-systemalgorithms, PFS is used for on-line file-systemdata storage. Algorithms are first analyzed in

Comparison among manual instruments and PathFile and Mtwo rotary instruments to create a glide path in the root canal preparation of curved canals.

Science.gov (United States)

Alves, Vanessa de Oliveira; Bueno, Carlos Eduardo da Silveira; Cunha, Rodrigo Sanches; Pinheiro, Sérgio Luiz; Fontana, Carlos Eduardo; de Martin, Alexandre Sigrist

2012-01-01

Nickel-titanium rotary instruments reduce procedural errors and the time required to finish root canal preparation. The goal of this study was to evaluate the occurrences of apical transportation and canal aberrations produced with different instruments used to create a glide path in the preparation of curved root canals, namely manual K-files (Dentsply Maillefer, Ballaigues, Switzerland) and PathFile (Dentsply Maillefer) and Mtwo (Sweden and Martina, Padua, Italy) nickel-titanium rotary files. The mesial canals of 45 mandibular first and second molars (with curvature angles between 25° and 35°) were selected for this study. The specimens were divided randomly into 3 groups with 15 canals each, and canal preparation was performed by an endodontist using #10-15-20 K-type stainless steel manual files (group M), #13-16-19 PathFile rotary instruments (group PF), and #10-15-20 Mtwo rotary instruments (group MT). The double digital radiograph technique was used, pre- and postinstrumentation, to assess whether apical transportation and/or aberration in root canal morphology occurred. The initial and final images of the central axis of the canals were compared by superimposition through computerized analysis and with the aid of magnification. The specimens were analyzed by 3 evaluators, whose calibration was checked using the Kendall agreement test. No apical transportation or aberration in root canal morphology occurred in any of the teeth; therefore, no statistical analysis was conducted. Neither the manual instruments nor the PathFile or Mtwo rotary instruments used to create a glide path had any influence on the occurrence of apical transportation or produced any canal aberration. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

76 FR 52731 - On-Line Complaint Form for Service-Related Issues in Air Transportation

Science.gov (United States)

2011-08-23

... for Service-Related Issues in Air Transportation AGENCY: Office of the Secretary, Department of... consumer protection and civil rights laws and regulations related to air transportation. The Enforcement... travelers, and to ensure safe and adequate service in air transportation. Filing a complaint using a web...

Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography –An In Vitro Study

Science.gov (United States)

Dhingra, Annil; Miglani, Anjali

2015-01-01

Background Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. Aim The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Materials and Methods Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. Results The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). Conclusion It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness. PMID:26023639

Modeling binary correlated responses using SAS, SPSS and R

CERN Document Server

Wilson, Jeffrey R

2015-01-01

Statistical tools to analyze correlated binary data are spread out in the existing literature. This book makes these tools accessible to practitioners in a single volume. Chapters cover recently developed statistical tools and statistical packages that are tailored to analyzing correlated binary data. The authors showcase both traditional and new methods for application to health-related research. Data and computer programs will be publicly available in order for readers to replicate model development, but learning a new statistical language is not necessary with this book. The inclusion of code for R, SAS, and SPSS allows for easy implementation by readers. For readers interested in learning more about the languages, though, there are short tutorials in the appendix. Accompanying data sets are available for download through the book s website. Data analysis presented in each chapter will provide step-by-step instructions so these new methods can be readily applied to projects.  Researchers and graduate stu...

75 FR 35781 - Centana Intrastate Pipeline, LLC; Notice of Baseline Filing

Science.gov (United States)

2010-06-23

... the Web site that enables subscribers to receive e-mail notification when a document is added to a subscribed docket(s). For assistance with any FERC Online service, please e-mail [email protected] Intrastate Pipeline, LLC submitted a baseline filing of its Transport Statement of Operating Conditions for...

Stratospheric Air Sub-sampler (SAS) and its application to analysis of Delta O-17(CO2) from small air samples collected with an AirCore

NARCIS (Netherlands)

Mrozek, Dorota Janina; van der Veen, Carina; Hofmann, Magdalena E. G.; Chen, Huilin; Kivi, Rigel; Heikkinen, Pauli; Rockmann, Thomas

2016-01-01

We present the set-up and a scientific application of the Stratospheric Air Sub-sampler (SAS), a device to collect and to store the vertical profile of air collected with an AirCore (Karion et al., 2010) in numerous sub-samples for later analysis in the laboratory. The SAS described here is a 20m

Recent progress on the R and D program of the seismic attenuation system (SAS) proposed for the advanced gravitational wave detector, LIGO II

International Nuclear Information System (INIS)

Bertolini, A.; Cella, G.; Chenyang, W.; Salvo, R. de; Kovalik, J.; Marka, S.; Sannibale, V.; Takamori, A.; Tariq, H.; Viboud, N.

2001-01-01

High-performance Seismic Isolation Systems in gravitational wave interferometers are needed not only to increase the sensitivity of the detectors but also to guarantee long periods of stable operation. SAS is essentially a system which produces the required in-band seismic isolation by use of passive mechanical filters and actively reduces the out of band seismic noise using inertial damping. The passive isolation is achieved for all the 6 degrees of freedom, with an Inverted Pendulum and a chain of single wire pendula whose masses are the Geometrical Anti-Spring Filters (GASF). The active control is applied to reduce mainly the noise below 4 Hz and to damp the resonances of the chain acting from the inverted pendulum table. Here we present a brief overview of SAS and recent results achieved from the full scale SAS prototype

Cut-and-Paste file-systems : integrating simulators and file systems

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

We have implemented an integrated and configurable file system called the PFS and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-system algorithms, PFS is used for on-line file-system data storage. Algorithms are first analyzed in Patsy and when we are

Application of space-angle synthesis to two-dimensional neutral-particle transport problems of weapon physics

International Nuclear Information System (INIS)

Roberds, R.M.

1975-01-01

A space-angle synthesis (SAS) method has been developed for treating the steady-state, two-dimensional transport of neutrons and gamma rays from a point source of simulated nuclear weapon radiation in air. The method was validated by applying it to the problem of neutron transport from a point source in air over a ground interface, and then comparing the results to those obtained by DOT, a state-of-the-art, discrete-ordinates code. In the SAS method, the energy dependence of the Boltzmann transport equation was treated in the standard multigroup manner. The angular dependence was treated by expanding the flux in specially tailored trial functions and applying the method of weighted residuals which analytically integrated the transport equation over all angles. The weighted-residual approach was analogous to the conventional spherical-harmonics (P/sub N/) method with the exception that the tailored expansion allowed for more rapid convergence than a spherical-harmonics P 1 expansion and resulted in a greater degree of accuracy. The trial functions used in the expansion were odd and even combinations of selected trial solutions, the trial solutions being shaped ellipsoids which approximated the angular distribution of the neutron flux in one-dimensional space. The parameters which described the shape of the ellipsoid varied with energy group and the spatial medium, only, and were obtained from a one-dimensional discrete-ordinates calculation. Thus, approximate transport solutions were made available for all two-dimensional problems of a certain class by using tabulated parameters obtained from a single, one-dimensional calculation

SAS Macros for Calculation of Population Attributable Fraction in a Cohort Study Design

Directory of Open Access Journals (Sweden)

Maarit A. Laaksonen

2011-08-01

Full Text Available The population attributable fraction (PAF is a useful measure for quantifying the impact of exposure to certain risk factors on a particular outcome at the population level. Recently, new model-based methods for the estimation of PAF and its confidence interval for different types of outcomes in a cohort study design have been proposed. In this paper, we introduce SAS macros implementing these methods and illustrate their application with a data example on the impact of different risk factors on type 2 diabetes incidence.

Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files

International Nuclear Information System (INIS)

Randolph Schwarz; Leland L. Carter; Alysia Schwarz

2005-01-01

Monte Carlo N-Particle Transport Code (MCNP) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle is internationally recognized as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant was used to enhance the capabilities of the MCNP Visual Editor to allow it to read in both 2D and 3D Computer Aided Design (CAD) files, allowing the user to electronically generate a valid MCNP input geometry

Report on the achievements in the Sunshine Project in fiscal 1986. Surveys on coal type selection and surveys on coal types (Data file); 1986 nendo tanshu sentei chosa tanshu chosa seika hokokusho. Data file

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

This data file is a data file concerning coal types for liquefaction in the report on the achievements in the surveys on coal type selection and on coal types (JN0040843). Such items of information were filed as existence and production of coals, various kinds of analyses, and test values relative to data for liquefaction tests that have been collected and sent to date. The file consists of two files of a test sample information file related to existence and production of coals and coal mines, and an analysis and test file accommodating the results of different analyses and tests. However, the test sample information files (1) through (6) have not been put into order on such items of information as test samples and sample collection, geography, geology, ground beds, coal beds, coal mines, development and transportation. The analysis and test file contains (7) industrial analyses, (8) element analysis, (9) ash composition, (10) solubility of ash, (11) structure analysis, (12) liquefaction characteristics (standard version), (13) analysis of liquefaction produced gas, (14) distillation characteristics of liquefaction produced oil, (15) liquefaction characteristics (simplified version), (16) analysis of liquefaction produced gas (simplified version), and (17) distillation characteristics of liquefaction produced oil (simplified version). However, the information related to liquefaction test using a tubing reactor in (15) through (17) has not been put into order. (NEDO)

Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-file Systems.

Science.gov (United States)

Prabhakar, Attiguppe R; Yavagal, Chandrashekar; Dixit, Kratika; Naik, Saraswathi V

2016-01-01

Primary root canals are considered to be most challenging due to their complex anatomy. "Wave one" and "one shape" are single-file systems with reciprocating and rotary motion respectively. The aim of this study was to evaluate and compare dentin thickness, centering ability, canal transportation, and instrumentation time of wave one and one shape files in primary root canals using a cone beam computed tomographic (CBCT) analysis. This is an experimental, in vitro study comparing the two groups. A total of 24 extracted human primary teeth with minimum 7 mm root length were included in the study. Cone beam computed tomographic images were taken before and after the instrumentation for each group. Dentin thickness, centering ability, canal transportation, and instrumentation times were evaluated for each group. A significant difference was found in instrumentation time and canal transportation measures between the two groups. Wave one showed less canal transportation as compared with one shape, and the mean instrumentation time of wave one was significantly less than one shape. Reciprocating single-file systems was found to be faster with much less procedural errors and can hence be recommended for shaping the root canals of primary teeth. How to cite this article: Prabhakar AR, Yavagal C, Dixit K, Naik SV. Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-File Systems. Int J Clin Pediatr Dent 2016;9(1):45-49.

File sharing

NARCIS (Netherlands)

van Eijk, N.

2011-01-01

‘File sharing’ has become generally accepted on the Internet. Users share files for downloading music, films, games, software etc. In this note, we have a closer look at the definition of file sharing, the legal and policy-based context as well as enforcement issues. The economic and cultural

Atomistic modelling of scattering data in the Collaborative Computational Project for Small Angle Scattering (CCP-SAS).

Science.gov (United States)

Perkins, Stephen J; Wright, David W; Zhang, Hailiang; Brookes, Emre H; Chen, Jianhan; Irving, Thomas C; Krueger, Susan; Barlow, David J; Edler, Karen J; Scott, David J; Terrill, Nicholas J; King, Stephen M; Butler, Paul D; Curtis, Joseph E

2016-12-01

The capabilities of current computer simulations provide a unique opportunity to model small-angle scattering (SAS) data at the atomistic level, and to include other structural constraints ranging from molecular and atomistic energetics to crystallography, electron microscopy and NMR. This extends the capabilities of solution scattering and provides deeper insights into the physics and chemistry of the systems studied. Realizing this potential, however, requires integrating the experimental data with a new generation of modelling software. To achieve this, the CCP-SAS collaboration (http://www.ccpsas.org/) is developing open-source, high-throughput and user-friendly software for the atomistic and coarse-grained molecular modelling of scattering data. Robust state-of-the-art molecular simulation engines and molecular dynamics and Monte Carlo force fields provide constraints to the solution structure inferred from the small-angle scattering data, which incorporates the known physical chemistry of the system. The implementation of this software suite involves a tiered approach in which GenApp provides the deployment infrastructure for running applications on both standard and high-performance computing hardware, and SASSIE provides a workflow framework into which modules can be plugged to prepare structures, carry out simulations, calculate theoretical scattering data and compare results with experimental data. GenApp produces the accessible web-based front end termed SASSIE-web , and GenApp and SASSIE also make community SAS codes available. Applications are illustrated by case studies: (i) inter-domain flexibility in two- to six-domain proteins as exemplified by HIV-1 Gag, MASP and ubiquitin; (ii) the hinge conformation in human IgG2 and IgA1 antibodies; (iii) the complex formed between a hexameric protein Hfq and mRNA; and (iv) synthetic 'bottlebrush' polymers.

Stochastic models of intracellular transport

KAUST Repository

Bressloff, Paul C.

2013-01-09

The interior of a living cell is a crowded, heterogenuous, fluctuating environment. Hence, a major challenge in modeling intracellular transport is to analyze stochastic processes within complex environments. Broadly speaking, there are two basic mechanisms for intracellular transport: passive diffusion and motor-driven active transport. Diffusive transport can be formulated in terms of the motion of an overdamped Brownian particle. On the other hand, active transport requires chemical energy, usually in the form of adenosine triphosphate hydrolysis, and can be direction specific, allowing biomolecules to be transported long distances; this is particularly important in neurons due to their complex geometry. In this review a wide range of analytical methods and models of intracellular transport is presented. In the case of diffusive transport, narrow escape problems, diffusion to a small target, confined and single-file diffusion, homogenization theory, and fractional diffusion are considered. In the case of active transport, Brownian ratchets, random walk models, exclusion processes, random intermittent search processes, quasi-steady-state reduction methods, and mean-field approximations are considered. Applications include receptor trafficking, axonal transport, membrane diffusion, nuclear transport, protein-DNA interactions, virus trafficking, and the self-organization of subcellular structures. © 2013 American Physical Society.

ORNL-SAS: Versatile software for calculation of small-angle x-ray and neutron scattering intensity profiles from arbitrary structures

International Nuclear Information System (INIS)

Heller, William T; Tjioe, Elina

2007-01-01

ORNL-SAS is software for calculating solution small-angle scattering intensity profiles from any structure provided in the Protein Data Bank format and can also compare the results with experimental data

Plan de negocio para la creación de la empresa Itech S.A.S.

OpenAIRE

2012-01-01

ITEH S.A.S ofrecerá el servicio de consultoría y asesoría en el uso y gestión de las tecnologías de la información y las comunicaciones a las pymes del sector servicios, específicamente en el subsector jurídico, con el fin de apoyar sus procesos de negocio y fortalecer la competitividad de las mismas.

Usual Dietary Intakes: SAS Macros for Estimating Ratios of Two Dietary Components that are Consumed Nearly Every Day

Science.gov (United States)

The following SAS macros can be used to create a bivariate distribution of usual intake of two dietary components that are consumed nearly every day and to calculate percentiles of the population distribution of the ratio of usual intakes.

SAS Code for Calculating Intraclass Correlation Coefficients and Effect Size Benchmarks for Site-Randomized Education Experiments

Science.gov (United States)

Brandon, Paul R.; Harrison, George M.; Lawton, Brian E.

2013-01-01

When evaluators plan site-randomized experiments, they must conduct the appropriate statistical power analyses. These analyses are most likely to be valid when they are based on data from the jurisdictions in which the studies are to be conducted. In this method note, we provide software code, in the form of a SAS macro, for producing statistical…

Unbinding Transition of Probes in Single-File Systems

Science.gov (United States)

Bénichou, Olivier; Démery, Vincent; Poncet, Alexis

2018-02-01

Single-file transport, arising in quasi-one-dimensional geometries where particles cannot pass each other, is characterized by the anomalous dynamics of a probe, notably its response to an external force. In these systems, the motion of several probes submitted to different external forces, although relevant to mixtures of charged and neutral or active and passive objects, remains unexplored. Here, we determine how several probes respond to external forces. We rely on a hydrodynamic description of the symmetric exclusion process to obtain exact analytical results at long times. We show that the probes can either move as a whole, or separate into two groups moving away from each other. In between the two regimes, they separate with a different dynamical exponent, as t1 /4. This unbinding transition also occurs in several continuous single-file systems and is expected to be observable.

Use of SAS in the IDB

International Nuclear Information System (INIS)

Morrison, G.W.; Notz, K.J.; Mastal, E.F.; Trice, V.G.

1984-01-01

The Integrated Data Base (IDB) Program provides official US Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. This information is provided through the cooperative efforts of the IDB Program and DOE lead offices, lead sites, major programs, and generator sites. The program is entering its fifth yeaar, and major accomplishments are summarized in three broad areas: (1) the annual inventory report, including ORIGEN2 applications and a Quality Assurance (QA) plan; (2) the summary data file and direct user access; and (3) data processing methodology and support to other programs. Plans for future work in these areas are outlined briefly, including increased utilization of personal computers. Some examples of spent fuel data are given in terms of projected quantities for two growth scenarios, burnup and age profile of the existing inventory, and the approximate specific thermal power relative to high-level waste (HLW) from various sources. 2 references, 3 figures

Renewal-anomalous-heterogeneous files

International Nuclear Information System (INIS)

Flomenbom, Ophir

2010-01-01

Renewal-anomalous-heterogeneous files are solved. A simple file is made of Brownian hard spheres that diffuse stochastically in an effective 1D channel. Generally, Brownian files are heterogeneous: the spheres' diffusion coefficients are distributed and the initial spheres' density is non-uniform. In renewal-anomalous files, the distribution of waiting times for individual jumps is not exponential as in Brownian files, yet obeys: ψ α (t)∼t -1-α , 0 2 >, obeys, 2 >∼ 2 > nrml α , where 2 > nrml is the MSD in the corresponding Brownian file. This scaling is an outcome of an exact relation (derived here) connecting probability density functions of Brownian files and renewal-anomalous files. It is also shown that non-renewal-anomalous files are slower than the corresponding renewal ones.

14 CFR 221.61 - Rules and regulations governing foreign air transportation.

Science.gov (United States)

2010-01-01

... governing foreign air transportation. Instead of being included in the fares tariffs, the rules and regulations governing foreign air transportation required to be filed by §§ 221.20 and 221.30 and/or... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Rules and regulations governing foreign air...

PC Graphic file programing

International Nuclear Information System (INIS)

Yang, Jin Seok

1993-04-01

This book gives description of basic of graphic knowledge and understanding and realization of graphic file form. The first part deals with graphic with graphic data, store of graphic data and compress of data, programing language such as assembling, stack, compile and link of program and practice and debugging. The next part mentions graphic file form such as Mac paint file, GEM/IMG file, PCX file, GIF file, and TIFF file, consideration of hardware like mono screen driver and color screen driver in high speed, basic conception of dithering and conversion of formality.

Comparison of the SASSYS/SAS4A radial core expansion reactivity feedback model and the empirical correlation for FFTF

International Nuclear Information System (INIS)

Wigeland, R.A.

1987-01-01

The present emphasis on inherent safety for LMR designs has resulted in a need to represent the various reactivity feedback mechanisms as accurately as possible. The dominant negative reactivity feedback has been found to result from radial expansion of the core for most postulated ATWS events. For this reason, a more detailed model for calculating the reactivity feedback from radial core expansion has been recently developed for use with the SASSYS/SAS4A Code System. The purpose of this summary is to present an extension to the model so that it is more suitable for handling a core restraint design as used in FFTF, and to compare the SASSYS/SAS4A results using this model to the empirical correlation presently being used to account for radial core expansion reactivity feedback to FFTF

Experiences on File Systems: Which is the best file system for you?

CERN Document Server

Blomer, J

2015-01-01

The distributed file system landscape is scattered. Besides a plethora of research file systems, there is also a large number of production grade file systems with various strengths and weaknesses. The file system, as an abstraction of permanent storage, is appealing because it provides application portability and integration with legacy and third-party applications, including UNIX utilities. On the other hand, the general and simple file system interface makes it notoriously difficult for a distributed file system to perform well under a variety of different workloads. This contribution provides a taxonomy of commonly used distributed file systems and points out areas of research and development that are particularly important for high-energy physics.

Storing files in a parallel computing system using list-based index to identify replica files

Science.gov (United States)

Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Zhang, Zhenhua; Grider, Gary

2015-07-21

Improved techniques are provided for storing files in a parallel computing system using a list-based index to identify file replicas. A file and at least one replica of the file are stored in one or more storage nodes of the parallel computing system. An index for the file comprises at least one list comprising a pointer to a storage location of the file and a storage location of the at least one replica of the file. The file comprises one or more of a complete file and one or more sub-files. The index may also comprise a checksum value for one or more of the file and the replica(s) of the file. The checksum value can be evaluated to validate the file and/or the file replica(s). A query can be processed using the list.

The Music Therapy Session Assessment Scale (MT-SAS): Validation of a new tool for music therapy process evaluation.

Science.gov (United States)

Raglio, Alfredo; Gnesi, Marco; Monti, Maria Cristina; Oasi, Osmano; Gianotti, Marta; Attardo, Lapo; Gontero, Giulia; Morotti, Lara; Boffelli, Sara; Imbriani, Chiara; Montomoli, Cristina; Imbriani, Marcello

2017-11-01

Music therapy (MT) interventions are aimed at creating and developing a relationship between patient and therapist. However, there is a lack of validated observational instruments to consistently evaluate the MT process. The purpose of this study was the validation of Music Therapy Session Assessment Scale (MT-SAS), designed to assess the relationship between therapist and patient during active MT sessions. Videotapes of a single 30-min session per patient were considered. A pilot study on the videotapes of 10 patients was carried out to help refine the items, define the scoring system and improve inter-rater reliability among the five raters. Then, a validation study on 100 patients with different clinical conditions was carried out. The Italian MT-SAS was used throughout the process, although we also provide an English translation. The final scale consisted of 7 binary items accounting for eye contact, countenance, and nonverbal and sound-music communication. In the pilot study, raters were found to share an acceptable level of agreement in their assessments. Explorative factorial analysis disclosed a single homogeneous factor including 6 items (thus supporting an ordinal total score), with only the item about eye contact being unrelated to the others. Moreover, the existence of 2 different archetypal profiles of attuned and disattuned behaviours was highlighted through multiple correspondence analysis. As suggested by the consistent results of 2 different analyses, MT-SAS is a reliable tool that globally evaluates sonorous-musical and nonverbal behaviours related to emotional attunement and empathetic relationship between patient and therapist during active MT sessions. Copyright © 2017 John Wiley & Sons, Ltd.

Enhancing the solubility and bioavailability of poorly water-soluble drugs using supercritical antisolvent (SAS) process.

Science.gov (United States)

Abuzar, Sharif Md; Hyun, Sang-Min; Kim, Jun-Hee; Park, Hee Jun; Kim, Min-Soo; Park, Jeong-Sook; Hwang, Sung-Joo

2018-03-01

Poor water solubility and poor bioavailability are problems with many pharmaceuticals. Increasing surface area by micronization is an effective strategy to overcome these problems, but conventional techniques often utilize solvents and harsh processing, which restricts their use. Newer, green technologies, such as supercritical fluid (SCF)-assisted particle formation, can produce solvent-free products under relatively mild conditions, offering many advantages over conventional methods. The antisolvent properties of the SCFs used for microparticle and nanoparticle formation have generated great interest in recent years, because the kinetics of the precipitation process and morphologies of the particles can be accurately controlled. The characteristics of the supercritical antisolvent (SAS) technique make it an ideal tool for enhancing the solubility and bioavailability of poorly water-soluble drugs. This review article focuses on SCFs and their properties, as well as the fundamentals of overcoming poorly water-soluble drug properties by micronization, crystal morphology control, and formation of composite solid dispersion nanoparticles with polymers and/or surfactants. This article also presents an overview of the main aspects of the SAS-assisted particle precipitation process, its mechanism, and parameters, as well as our own experiences, recent advances, and trends in development. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparison of canal transportation and centering ability of rotary protaper, one shape system and wave one system using cone beam computed tomography: An in vitro study

Science.gov (United States)

Tambe, Varsha Harshal; Nagmode, Pradnya Sunil; Abraham, Sathish; Patait, Mahendra; Lahoti, Pratik Vinod; Jaju, Neha

2014-01-01

Aim: The aim of the present study was to compare the canal transportation and centering ability of Rotary ProTaper, One Shape and Wave One systems using cone beam computed tomography (CBCT) in curved root canals to find better instrumentation technique for maintaining root canal geometry. Materials and Methods: Total 30 freshly extracted premolars having curved root canals with at least 10 degrees of curvature were divided into three groups of 10 teeth each. All teeth were scanned by CBCT to determine the root canal shape before instrumentation. In Group 1, the canals were prepared with Rotary ProTaper files, in Group 2 the canals were prepared with One Shape files and in Group 3 canals were prepared with Wave One files. After preparation, post-instrumentation scan was performed. Pre-instrumentation and post-instrumentation images were obtained at three levels, 3 mm apical, 3 mm coronal and 8 mm apical above the apical foramen were compared using CBCT software. Amount of transportation and centering ability were assessed. The three groups were statistically compared with analysis of variance and Tukey honestly significant. Results: All instruments maintained the original canal curvature with significant differences between the different files. Data suggested that Wave One files presented the best outcomes for both the variables evaluated. Wave One files caused lesser transportation and remained better centered in the canal than One Shape and Rotary ProTaper files. Conclusion: The canal preparation with Wave One files showed lesser transportation and better centering ability than One Shape and ProTaper. PMID:25506145

PCF File Format.

Energy Technology Data Exchange (ETDEWEB)

Thoreson, Gregory G [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-08-01

PCF files are binary files designed to contain gamma spectra and neutron count rates from radiation sensors. It is the native format for the GAmma Detector Response and Analysis Software (GADRAS) package [1]. It can contain multiple spectra and information about each spectrum such as energy calibration. This document outlines the format of the file that would allow one to write a computer program to parse and write such files.

Transmission of the environmental radiation data files on the internet

International Nuclear Information System (INIS)

Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi; Matsumoto, Atsushi; Kyoh, Bunkei

1999-01-01

Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3''φ x 3'' NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of γ-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

Transmission of the environmental radiation data files on the internet

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi [Osaka Univ., Suita (Japan). Radioisotope Research Center; Matsumoto, Atsushi; Kyoh, Bunkei

1999-01-01

Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3``{phi} x 3`` NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of {gamma}-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

BLT-EC (Breach, Leach and Transport-Equilibrium Chemistry) data input guide. A computer model for simulating release and coupled geochemical transport of contaminants from a subsurface disposal facility

International Nuclear Information System (INIS)

MacKinnon, R.J.; Sullivan, T.M.; Kinsey, R.R.

1997-05-01

The BLT-EC computer code has been developed, implemented, and tested. BLT-EC is a two-dimensional finite element computer code capable of simulating the time-dependent release and reactive transport of aqueous phase species in a subsurface soil system. BLT-EC contains models to simulate the processes (container degradation, waste-form performance, transport, chemical reactions, and radioactive production and decay) most relevant to estimating the release and transport of contaminants from a subsurface disposal system. Water flow is provided through tabular input or auxiliary files. Container degradation considers localized failure due to pitting corrosion and general failure due to uniform surface degradation processes. Waste-form performance considers release to be limited by one of four mechanisms: rinse with partitioning, diffusion, uniform surface degradation, and solubility. Transport considers the processes of advection, dispersion, diffusion, chemical reaction, radioactive production and decay, and sources (waste form releases). Chemical reactions accounted for include complexation, sorption, dissolution-precipitation, oxidation-reduction, and ion exchange. Radioactive production and decay in the waste form is simulated. To improve the usefulness of BLT-EC, a pre-processor, ECIN, which assists in the creation of chemistry input files, and a post-processor, BLTPLOT, which provides a visual display of the data have been developed. BLT-EC also includes an extensive database of thermodynamic data that is also accessible to ECIN. This document reviews the models implemented in BLT-EC and serves as a guide to creating input files and applying BLT-EC

14 CFR 399.40 - Tariffs for domestic air transportation on or after January 1, 1983.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Tariffs for domestic air transportation on... Relating to Rates and Tariffs § 399.40 Tariffs for domestic air transportation on or after January 1, 1983. The Board will not approve or accept any tariff filings for interstate of overseas air transportation...

Cdk1 Phosphorylates Drosophila Sas-4 to Recruit Polo to Daughter Centrioles and Convert Them to Centrosomes.

Science.gov (United States)

Novak, Zsofia A; Wainman, Alan; Gartenmann, Lisa; Raff, Jordan W

2016-06-20

Centrosomes and cilia are organized by a centriole pair comprising an older mother and a younger daughter. Centriole numbers are tightly regulated, and daughter centrioles (which assemble in S phase) cannot themselves duplicate or organize centrosomes until they have passed through mitosis. It is unclear how this mitotic "centriole conversion" is regulated, but it requires Plk1/Polo kinase. Here we show that in flies, Cdk1 phosphorylates the conserved centriole protein Sas-4 during mitosis. This creates a Polo-docking site that helps recruit Polo to daughter centrioles and is required for the subsequent recruitment of Asterless (Asl), a protein essential for centriole duplication and mitotic centrosome assembly. Point mutations in Sas-4 that prevent Cdk1 phosphorylation or Polo docking do not block centriole disengagement during mitosis, but block efficient centriole conversion and lead to embryonic lethality. These observations can explain why daughter centrioles have to pass through mitosis before they can duplicate and organize a centrosome. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

Energy Technology Data Exchange (ETDEWEB)

Johnson, PE

2003-09-18

The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

Download this PDF file

African Journals Online (AJOL)

PROF EKWUEME

K. S. Okiongbo, Geophysics Unit, Department of Physics, Niger Delta University, Wilberforce Island, ... potential. MATERIALS AND METHOD. Fifteen (15) vertical electrical sounding (VES) ... Terrameter SAS 3000, a digital self averaging.

Comparison of apical transportation and change of working length in K3, NRT AND PROFILE rotary instruments using transparent resin block

Directory of Open Access Journals (Sweden)

Min-Jung Yoon

2011-01-01

Full Text Available Objectives The purpose of this study is to compare the apical transportation and working length change in curved root canals created in resin blocks, using 3 geometrically different types of Ni-Ti files, K3, NRT, and Profile. Materials and Methods The curvature of 30 resin blocks was measured by Schneider technique and each groups of Ni-Ti files were allocated with 10 resin blocks at random. The canals were shaped with Ni-Ti files by Crown-down technique. It was analyzed by Double radiograph superimposition method (Backman CA 1992, and for the accuracy and consistency, specially designed jig, digital X-ray, and CAD/CAM software for measurement of apical transportation were used. The amount of apical transportation was measured at 0, 1, 3, 5 mm from 'apical foramen - 0.5 mm' area, and the alteration of the working length before and after canal shaping was also measured. For statistics, Kruskal-Wallis One Way Analysis was used. Results There was no significant difference between the groups in the amount of working length change and apical transportation at 0, 1, and 3 mm area (p = 0.027, however, the amount of apical transportation at 5 mm area showed significant difference between K3 and Profile system (p = 0.924. Conclusions As a result of this study, the 3 geometrically different Ni-Ti files showed no significant difference in apical transportation and working length change and maintained the original root canal shape.

Provider of Services File

Data.gov (United States)

U.S. Department of Health & Human Services — The POS file consists of two data files, one for CLIA labs and one for 18 other provider types. The file names are CLIA and OTHER. If downloading the file, note it...

Download this PDF file

African Journals Online (AJOL)

RAGHAVENDRA

2015-03-17

Mar 17, 2015 ... are important in the design and implementation of indigenous rograms. The indigenous .... through observation, administering a structured questionnaire ... Descriptive Statistics: Statistical analysis system (SAS) version 9.2 ...

Building sustainable policy framework for transport development: A review of national transport policy initiatives in Nigeria

Directory of Open Access Journals (Sweden)

Sumaila A.F.

2013-06-01

Full Text Available This paper is concerned with building a sustainable policy framework for transport development in Nigeria. Its objective is to review the country’s transport policy initiatives in order to understand the extent to which it addresses Nigeria’s mobility and transportation problems. From published materials and official government documents and files, the study identifies four national policy initiatives which are reviewed and analysed with regard to their context, contents, and consequences. The study reveals that while the policy initiatives could be said to be adequate and comprehensive in terms of their context and contents, the major challenge is implementation of recommended solutions. The study therefore provides a general checklist to guide policy direction, while advocating for policy-based researches and empirical studies in order to provide the data base for formulation of a sustainable national transport policy for Nigeria.

Text File Comparator

Science.gov (United States)

Kotler, R. S.

1983-01-01

File Comparator program IFCOMP, is text file comparator for IBM OS/VScompatable systems. IFCOMP accepts as input two text files and produces listing of differences in pseudo-update form. IFCOMP is very useful in monitoring changes made to software at the source code level.

75 FR 33205 - Revision of the Procedures for the Administration of Section 5 of the Voting Rights Act

Science.gov (United States)

2010-06-11

... Flexibility Analysis was not required to be prepared for this rule because the Department of Justice was not... files (e.g. SAS, SPSS, dBase, Lotus 1- 2-3) and data files containing compressed data or binary data...

The Proposal of Co-Branding Strategy PT. XYZ and SAS in Automotive Sector in SPAIN Market to Increase PT. XYZ Reputation in International Market

OpenAIRE

Putra A, Freggy Griyatta; Nasution, Reza Ashari

2012-01-01

The development of the lubricant market in the Asia-Pacific, Africa, Middle East, and South America is an opportunity for PT.XYZ in the future. PT. XYZ wants to improve their brand image through co-branding with the SAS company as one of the local oil company in Spain. The study also analyzes the co-branding strategy through Joint Venture of PT. XYZ with SAS to improve the company's brand image in the International market. The conceptual framework of this research started from the goal of PT....

CFEST Coupled Flow, Energy & Solute Transport Version CFEST005 User’s Guide

Energy Technology Data Exchange (ETDEWEB)

Freedman, Vicky L.; Chen, Yousu; Gilca, Alex; Cole, Charles R.; Gupta, Sumant K.

2006-07-20

The CFEST (Coupled Flow, Energy, and Solute Transport) simulator described in this User’s Guide is a three-dimensional finite-element model used to evaluate groundwater flow and solute mass transport. Confined and unconfined aquifer systems, as well as constant and variable density fluid flows can be represented with CFEST. For unconfined aquifers, the model uses a moving boundary for the water table, deforming the numerical mesh so that the uppermost nodes are always at the water table. For solute transport, changes in concentra¬tion of a single dissolved chemical constituent are computed for advective and hydrodynamic transport, linear sorption represented by a retardation factor, and radioactive decay. Although several thermal parameters described in this User’s Guide are required inputs, thermal transport has not yet been fully implemented in the simulator. Once fully implemented, transport of thermal energy in the groundwater and solid matrix of the aquifer can also be used to model aquifer thermal regimes. The CFEST simulator is written in the FORTRAN 77 language, following American National Standards Institute (ANSI) standards. Execution of the CFEST simulator is controlled through three required text input files. These input file use a structured format of associated groups of input data. Example input data lines are presented for each file type, as well as a description of the structured FORTRAN data format. Detailed descriptions of all input requirements, output options, and program structure and execution are provided in this User’s Guide. Required inputs for auxillary CFEST utilities that aide in post-processing data are also described. Global variables are defined for those with access to the source code. Although CFEST is a proprietary code (CFEST, Inc., Irvine, CA), the Pacific Northwest National Laboratory retains permission to maintain its own source, and to distribute executables to Hanford subcontractors.

Status and evaluation methods of JENDL fusion file and JENDL PKA/KERMA file

International Nuclear Information System (INIS)

Chiba, S.; Fukahori, T.; Shibata, K.; Yu Baosheng; Kosako, K.

1997-01-01

The status of evaluated nuclear data in the JENDL fusion file and PKA/KERMA file is presented. The JENDL fusion file was prepared in order to improve the quality of the JENDL-3.1 data especially on the double-differential cross sections (DDXs) of secondary neutrons and gamma-ray production cross sections, and to provide DDXs of secondary charged particles (p, d, t, 3 He and α-particle) for the calculation of PKA and KERMA factors. The JENDL fusion file contains evaluated data of 26 elements ranging from Li to Bi. The data in JENDL fusion file reproduce the measured data on neutron and charged-particle DDXs and also on gamma-ray production cross sections. Recoil spectra in PKA/KERMA file were calculated from secondary neutron and charged-particle DDXs contained in the fusion file with two-body reaction kinematics. The data in the JENDL fusion file and PKA/KERMA file were compiled in ENDF-6 format with an MF=6 option to store the DDX data. (orig.)

77 FR 27534 - Aviation Proceedings, Agreements Filed the Week Ending April 28, 2012

Science.gov (United States)

2012-05-10

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Aviation Proceedings, Agreements Filed the... under the Sections 412 and 414 of the Federal Aviation Act, as amended (49 U.S.C. 1382 and 1384) and... Resolution 010o, Special Passenger Amending Resolution between Myanmar and TC3 (except South West Pacific), e...

77 FR 31421 - Aviation Proceedings, Agreements Filed the Week Ending May 12, 2012

Science.gov (United States)

2012-05-25

... DEPARTMENT OF TRANSPORTATION Office of the Secretary Aviation Proceedings, Agreements Filed the... under the Sections 412 and 414 of the Federal Aviation Act, as amended (49 U.S.C. 1382 and 1384) and... Resolution 010r from Myanmar to North, Central Pacific (Memo 0535) Intended Effective Date: 4 May 2012 Docket...

SAS3A analysis of natural convection boiling behavior in the Sodium Boiling Test Facility

International Nuclear Information System (INIS)

Klein, G.A.

1979-01-01

An analysis of natural convection boiling behavior in the Sodium Boiling Test (SBT) Facility has been performed using the SAS3A computer code. The predictions from this analysis indicate that stable boiling can be achieved for extensive periods of time for channel powers less than 1.4 kW and indicate intermittent dryout at higher powers up to at least 1.7 kW. The results of this anaysis are in reasonable agreement with the SBT Facility test results

Download this PDF file

African Journals Online (AJOL)

RAGHAVENDRA

uberosum L.) Cultivars Grown in Eastern Ethiopia. 1*, Nigussie Dechassa2 and .... General Linear Model of the SAS procedure of version. 9.1. For factors ...... research through the Local Seed Business (LSB) project. REFERENCES. Adane, H.

Securing the AliEn File Catalogue - Enforcing authorization with accountable file operations

International Nuclear Information System (INIS)

Schreiner, Steffen; Banerjee, Subho Sankar; Betev, Latchezar; Carminati, Federico; Vladimirovna Datskova, Olga; Furano, Fabrizio; Grigoras, Alina; Grigoras, Costin; Mendez Lorenzo, Patricia; Peters, Andreas Joachim; Saiz, Pablo; Bagnasco, Stefano; Zhu Jianlin

2011-01-01

The AliEn Grid Services, as operated by the ALICE Collaboration in its global physics analysis grid framework, is based on a central File Catalogue together with a distributed set of storage systems and the possibility to register links to external data resources. This paper describes several identified vulnerabilities in the AliEn File Catalogue access protocol regarding fraud and unauthorized file alteration and presents a more secure and revised design: a new mechanism, called LFN Booking Table, is introduced in order to keep track of access authorization in the transient state of files entering or leaving the File Catalogue. Due to a simplification of the original Access Envelope mechanism for xrootd-protocol-based storage systems, fundamental computational improvements of the mechanism were achieved as well as an up to 50% reduction of the credential's size. By extending the access protocol with signed status messages from the underlying storage system, the File Catalogue receives trusted information about a file's size and checksum and the protocol is no longer dependent on client trust. Altogether, the revised design complies with atomic and consistent transactions and allows for accountable, authentic, and traceable file operations. This paper describes these changes as part and beyond the development of AliEn version 2.19.

Relap4/SAS/Mod5 - A version of Relap4/Mod 5 adapted to IPEN/CNEN - SP computer center

International Nuclear Information System (INIS)

Sabundjian, G.

1988-04-01

In order to improve the safety of nuclear reactor power plants several computer codes have been developed in the area of thermal - hydraulics accident analysis. Among the public-available codes, RELAP4, developed by Aerojet Nuclear Company, has been the most popular one. RELAP4 has produced satisfactory results when compared to most of the available experimental data. The purposes of the present work are: optimization of RELAP4 output and messages by writing there information in temporary records, - display of RELAP4 results in graphical form through the printer. The sample problem consists on a simplified model of a 150 MW (e) PWR whose primary circuit is simulated by 6 volumes, 8 junctions and 1 heat slab. This new version of RELAP4 (named RELAP4/SAS/MOD5) have produced results which show that the above mentioned purposes have been reached. Obviously the graphical output by RELAP4/SAS/MOD5 favors the interpretation of results by the user. (author) [pt

A Metadata-Rich File System

Energy Technology Data Exchange (ETDEWEB)

Ames, S; Gokhale, M B; Maltzahn, C

2009-01-07

Despite continual improvements in the performance and reliability of large scale file systems, the management of file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, metadata, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS includes Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the defacto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

Plan de empresa DROP S.A.S. artículos y accesorios para mascotas

OpenAIRE

2012-01-01

Este trabajo es un plan de empresa que determina la viabilidad del proyecto DROP S.A.S, que tiene como finalidad la producción y comercialización de artículos para mascotas. Para lograr este fin, se ha realizado el plan de mercadeo, plan de producción, plan de organización y plan financiero, al hacer un estudio detallado de cada uno de estos módulos Inicialmente se elaboró el plan de mercadeo, en el que se hizo un análisis de las fuerzas del entorno, dentro del cual, se encuentra el estud...

HUD GIS Boundary Files

Data.gov (United States)

Department of Housing and Urban Development — The HUD GIS Boundary Files are intended to supplement boundary files available from the U.S. Census Bureau. The files are for community planners interested in...

[Calculating Pearson residual in logistic regressions: a comparison between SPSS and SAS].

Science.gov (United States)

Xu, Hao; Zhang, Tao; Li, Xiao-song; Liu, Yuan-yuan

2015-01-01

To compare the results of Pearson residual calculations in logistic regression models using SPSS and SAS. We reviewed Pearson residual calculation methods, and used two sets of data to test logistic models constructed by SPSS and STATA. One model contained a small number of covariates compared to the number of observed. The other contained a similar number of covariates as the number of observed. The two software packages produced similar Pearson residual estimates when the models contained a similar number of covariates as the number of observed, but the results differed when the number of observed was much greater than the number of covariates. The two software packages produce different results of Pearson residuals, especially when the models contain a small number of covariates. Further studies are warranted.

Appraisal for France of the safety of the transport of radioactive material. Provision for the application of the IAEA safety standards

International Nuclear Information System (INIS)

2004-01-01

The IAEA has the specific statutory function within the United Nations system of establishing standards of safety for the protection of health against exposure to ionizing radiation. As part of this mandate, the IAEA has issued Regulations for the Safe Transport of Radioactive Material, and has also established the Transport Safety Appraisal Service (TranSAS) to carry out, at the request of States, appraisals of the implementation of these regulations. The IAEA carried out such an appraisal in France from 27 March to 8 April 2004. The appraisal addressed all relevant transport activities in France, both national and international, for all modes of transport, with special emphasis on the maritime transport and air transport of radioactive material. This report summarizes the findings of the 13 independent experts who participated in the appraisal

Subsurface Transport Over Reactive Multiphases (STORM): A Parallel, Coupled, Nonisothermal Multiphase Flow, Reactive Transport, and Porous Medium Alteration Simulator, Version 3.0

International Nuclear Information System (INIS)

Bacon, Diana H.; White, Mark D.; McGrail, B PETER

2004-01-01

The U.S. Department of Energy must approve a performance assessment (PA) to support the design, construction, approval, and closure of disposal facilities for immobilized low-activity waste (ILAW) currently stored in underground tanks at Hanford, Washington. A critical component of the PA is to provide quantitative estimates of radionuclide release rates from the engineered portion of the disposal facilities. Computer simulations are essential for this purpose because impacts on groundwater resources must be projected to periods of 10,000 years and longer. The computer code selected for simulating the radionuclide release rates is the Subsurface Transport Over Reactive Multiphases (STORM) simulator. The STORM simulator solves coupled conservation equations for component mass and energy that describe subsurface flow over aqueous and gas phases through variably saturated geologic media. The resulting flow fields are used to sequentially solve conservation equations for reactive aqueous phase transport through variably saturated geologic media. These conservation equations for component mass, energy, and solute mass are partial differential equations that mathematically describe flow and transport through porous media. The STORM simulator solves the governing-conservation equations and constitutive functions using numerical techniques for nonlinear systems. The partial differential equations governing thermal and fluid flow processes are solved by the integral volume finite difference method. These governing equations are solved simultaneously using Newton-Raphson iteration. The partial differential equations governing reactive solute transport are solved using either an operator split technique where geochemical reactions and solute transport are solved separately, or a fully coupled technique where these equations are solved simultaneously. The STORM simulator is written in the FORTRAN 77 language, following American National Standards Institute (ANSI) standards

33 CFR 148.246 - When is a document considered filed and where should I file it?

Science.gov (United States)

2010-07-01

... filed and where should I file it? 148.246 Section 148.246 Navigation and Navigable Waters COAST GUARD... Formal Hearings § 148.246 When is a document considered filed and where should I file it? (a) If a document to be filed is submitted by mail, it is considered filed on the date it is postmarked. If a...

Protecting your files on the DFS file system

CERN Multimedia

Computer Security Team

2011-01-01

The Windows Distributed File System (DFS) hosts user directories for all NICE users plus many more data.    Files can be accessed from anywhere, via a dedicated web portal (http://cern.ch/dfs). Due to the ease of access to DFS with in CERN it is of utmost importance to properly protect access to sensitive data. As the use of DFS access control mechanisms is not obvious to all users, passwords, certificates or sensitive files might get exposed. At least this happened in past to the Andrews File System (AFS) - the Linux equivalent to DFS) - and led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed recently to apply more stringent protections to all DFS user folders. The goal of this data protection policy is to assist users in pro...

Protecting your files on the AFS file system

CERN Multimedia

2011-01-01

The Andrew File System is a world-wide distributed file system linking hundreds of universities and organizations, including CERN. Files can be accessed from anywhere, via dedicated AFS client programs or via web interfaces that export the file contents on the web. Due to the ease of access to AFS it is of utmost importance to properly protect access to sensitive data in AFS. As the use of AFS access control mechanisms is not obvious to all users, passwords, private SSH keys or certificates have been exposed in the past. In one specific instance, this also led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed in April 2010 to apply more stringent folder protections to all AFS user folders. The goal of this data protection policy is to assist users in...

Zebra: A striped network file system

Science.gov (United States)

Hartman, John H.; Ousterhout, John K.

1992-01-01

The design of Zebra, a striped network file system, is presented. Zebra applies ideas from log-structured file system (LFS) and RAID research to network file systems, resulting in a network file system that has scalable performance, uses its servers efficiently even when its applications are using small files, and provides high availability. Zebra stripes file data across multiple servers, so that the file transfer rate is not limited by the performance of a single server. High availability is achieved by maintaining parity information for the file system. If a server fails its contents can be reconstructed using the contents of the remaining servers and the parity information. Zebra differs from existing striped file systems in the way it stripes file data: Zebra does not stripe on a per-file basis; instead it stripes the stream of bytes written by each client. Clients write to the servers in units called stripe fragments, which are analogous to segments in an LFS. Stripe fragments contain file blocks that were written recently, without regard to which file they belong. This method of striping has numerous advantages over per-file striping, including increased server efficiency, efficient parity computation, and elimination of parity update.

Download this PDF file

African Journals Online (AJOL)

Statistical analysis of the results was performed on SAS 9.2, Microsoft ... are significant) using the t-test, Fisher's exact test and the simple linear regression test. .... This is supported by both the t-test (Table 1) and linear regression analysis.

Shaping ability of single-file reciprocating and heat-treated multifile rotary systems: a micro-CT study.

Science.gov (United States)

Marceliano-Alves, M F V; Sousa-Neto, M D; Fidel, S R; Steier, L; Robinson, J P; Pécora, J D; Versiani, M A

2015-12-01

To investigate changes in three-dimensional geometry, in various cross-sectional morphological parameters and in the centring ability of root canals prepared with different preparation systems using microcomputed tomographic imaging technology. Sixty-four mesial canals of mandibular molars were matched based on similar morphological dimensions using micro-CT evaluation and assigned to four experimental groups (n = 16), according to the canal preparation technique: Reciproc, WaveOne, Twisted File and HyFlex CM systems. Changes in several 2D (area, perimeter, form factor, roundness, minor and major diameter) and 3D [volume, surface area, structure model index (SMI)] morphological parameters, as well as canal transportation, were compared with preoperative values using Kruskal-Wallis and anovapost hoc Tukey's tests with the significance level set at 5%. Preparation significantly increased all tested parameters in the experimental groups. No significant differences were observed between groups regarding changes in volume, surface area, SMI, form factor and roundness of the root canal after preparation (P > 0.05). In the apical third, the Reciproc group had significantly greater changes in canal area, perimeter, major and minor diameters than the other groups (P File and HyFlex CM systems were associated with significantly less transportation than the reciprocating instruments, Reciproc and WaveOne (P File and HyFlex CM systems were able to maintain the original canal anatomy with less canal transportation than Reciproc and WaveOne; however, these differences are unlikely to be of clinical significance. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

A cost-effective Geographic Information Systems for Transportation ...

African Journals Online (AJOL)

A cost-effective Geographic Information Systems for Transportation (GIS-T) application for traffic congestion analyses in the Developing World. ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like ...

Evaluation of sleep apnea syndrome (SAS) with low field MR fluoroscopy

International Nuclear Information System (INIS)

Fukatsu, Hiroshi; Ando, Yoko; Ishigaki, Takeo; Okada, Tamotsu.

1995-01-01

Eight cases of clinically diagnosed sleep apnea syndrome (SAS) and two normal volunteers were studied with low field MR fluoroscopy in order to monitor the waking and sleeping status of the upper airway. MR fluoroscopy revealed that only the sleeping patients showed occlusions of the upper airway. This technique provided us with useful information about the level, frequency and duration of occlusion in each case. Four of the eight patients demonstrated simple retropalatal occlusion, whereas the other four demonstrated mixed retropalatal and retropalato-retroglossal occlusion. Thus long-time monitoring, which is only possible with MR fluoroscopy, is needed to appreciate the complex nature of the disease. In addition, the comfortable surroundings and low noise level provided by the low field enabled physiological study to be performed without any tranquilizers in most of the patients, which is again only possible with MR fluoroscopy. MR fluoroscopy may become a tool of great clinical value, providing much important information for disease evaluation and treatment selection. (author)

A design for a new catalog manager and associated file management for the Land Analysis System (LAS)

Science.gov (United States)

Greenhagen, Cheryl

1986-01-01

Due to the larger number of different types of files used in an image processing system, a mechanism for file management beyond the bounds of typical operating systems is necessary. The Transportable Applications Executive (TAE) Catalog Manager was written to meet this need. Land Analysis System (LAS) users at the EROS Data Center (EDC) encountered some problems in using the TAE catalog manager, including catalog corruption, networking difficulties, and lack of a reliable tape storage and retrieval capability. These problems, coupled with the complexity of the TAE catalog manager, led to the decision to design a new file management system for LAS, tailored to the needs of the EDC user community. This design effort, which addressed catalog management, label services, associated data management, and enhancements to LAS applications, is described. The new file management design will provide many benefits including improved system integration, increased flexibility, enhanced reliability, enhanced portability, improved performance, and improved maintainability.

JENDL Dosimetry File

International Nuclear Information System (INIS)

Nakazawa, Masaharu; Iguchi, Tetsuo; Kobayashi, Katsuhei; Iwasaki, Shin; Sakurai, Kiyoshi; Ikeda, Yujiro; Nakagawa, Tsuneo.

1992-03-01

The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d, n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form. (author) 76 refs

JENDL Dosimetry File

Energy Technology Data Exchange (ETDEWEB)

Nakazawa, Masaharu; Iguchi, Tetsuo [Tokyo Univ. (Japan). Faculty of Engineering; Kobayashi, Katsuhei [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.; Iwasaki, Shin [Tohoku Univ., Sendai (Japan). Faculty of Engineering; Sakurai, Kiyoshi; Ikeda, Yujior; Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1992-03-15

The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d,n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form.

Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D

Science.gov (United States)

Frerichs, H.; Schmitz, O.; Covele, B.; Feng, Y.; Guo, H. Y.; Hill, D.

2018-05-01

Numerical simulations of toroidal asymmetries in a tightly baffled small angle slot (SAS) divertor on the DIII-D tokamak show that toroidal asymmetries in divertor closure result in (non-axisymmetric) local onset of detachment within a density window of 10-15% on top of the nominal threshold separatrix density. The SAS divertor is explored at DIII-D for improving access to cold, dissipative/detached divertor conditions. The narrow width of the slot divertor coupled with a small magnetic field line-to-target angle facilitates the buildup of neutral density, thereby increasing radiative and neutrals-related (atoms and molecules) losses in the divertor. Small changes in the strike point location can be expected to have a large impact on divertor conditions. The combination of misaligned slot structure and non-axisymmetric perturbations to the magnetic field configuration causes the strike point to move along the divertor target plate, possibly leaving the divertor slot at some locations. The latter extreme case essentially introduces an opening in the divertor slot from where recycling neutrals can easily escape, and thereby degrade the performance of the slot divertor. Such a strike point dislocation is approximated by a finite gap in the divertor baffle for which 3D edge plasma and neutral gas simulations are performed with the EMC3-EIRENE code.

Application of Snowfall and Wind Statistics to Snow Transport Modeling for Snowdrift Control in Minnesota.

Science.gov (United States)

Shulski, Martha D.; Seeley, Mark W.

2004-11-01

Models were utilized to determine the snow accumulation season (SAS) and to quantify windblown snow for the purpose of snowdrift control for locations in Minnesota. The models require mean monthly temperature, snowfall, density of snow, and wind frequency distribution statistics. Temperature and precipitation data were obtained from local cooperative observing sites, and wind data came from Automated Surface Observing System (ASOS)/Automated Weather Observing System (AWOS) sites in the region. The temperature-based algorithm used to define the SAS reveals a geographic variability in the starting and ending dates of the season, which is determined by latitude and elevation. Mean seasonal snowfall shows a geographic distribution that is affected by topography and proximity to Lake Superior. Mean snowfall density also exhibits variability, with lower-density snow events displaced to higher-latitude positions. Seasonal wind frequencies show a strong bimodal distribution with peaks from the northwest and southeast vector direction, with an exception for locations in close proximity to the Lake Superior shoreline. In addition, for western and south-central Minnesota there is a considerably higher frequency of wind speeds above the mean snow transport threshold of 7 m s-1. As such, this area is more conducive to higher potential snow transport totals. Snow relocation coefficients in this area are in the range of 0.4 0.9, and, according to the empirical models used in this analysis, this range implies that actual snow transport is 40% 90% of the total potential in south-central and western areas of the state.

A File Archival System

Science.gov (United States)

Fanselow, J. L.; Vavrus, J. L.

1984-01-01

ARCH, file archival system for DEC VAX, provides for easy offline storage and retrieval of arbitrary files on DEC VAX system. System designed to eliminate situations that tie up disk space and lead to confusion when different programers develop different versions of same programs and associated files.

Comparative evaluation of debris extruded apically by using, Protaper retreatment file, K3 file and H-file with solvent in endodontic retreatment

Directory of Open Access Journals (Sweden)

Chetna Arora

2012-01-01

Full Text Available Aim: The aim of this study was to evaluate the apical extrusion of debris comparing 2 engine driven systems and hand instrumentation technique during root canal retreatment. Materials and Methods: Forty five human permanent mandibular premolars were prepared using the step-back technique, obturated with gutta-percha/zinc oxide eugenol sealer and cold lateral condensation technique. The teeth were divided into three groups: Group A: Protaper retreatment file, Group B: K3, file Group C: H-file with tetrachloroethylene. All the canals were irrigated with 20ml distilled water during instrumentation. Debris extruded along with the irrigating solution during retreatment procedure was carefully collected in preweighed Eppendorf tubes. The tubes were stored in an incubator for 5 days, placed in a desiccator and then re-weighed. Weight of dry debris was calculated by subtracting the weight of the tube before instrumentation and from the weight of the tube after instrumentation. Data was analyzed using Two Way ANOVA and Post Hoc test. Results : There was statistically significant difference in the apical extrusion of debris between hand instrumentation and protaper retreatment file and K3 file. The amount of extruded debris caused by protaper retreatment file and K3 file instrumentation technique was not statistically significant. All the three instrumentation techniques produced apically extruded debris and irrigant. Conclusion: The best way to minimize the extrusion of debris is by adapting crown down technique therefore the use of rotary technique (Protaper retreatment file, K3 file is recommended.

Computer Forensics Method in Analysis of Files Timestamps in Microsoft Windows Operating System and NTFS File System

Directory of Open Access Journals (Sweden)

Vesta Sergeevna Matveeva

2013-02-01

Full Text Available All existing file browsers displays 3 timestamps for every file in file system NTFS. Nowadays there are a lot of utilities that can manipulate temporal attributes to conceal the traces of file using. However every file in NTFS has 8 timestamps that are stored in file record and used in detecting the fact of attributes substitution. The authors suggest a method of revealing original timestamps after replacement and automated variant of it in case of a set of files.

76 FR 43679 - Filing via the Internet; Notice of Additional File Formats for efiling

Science.gov (United States)

2011-07-21

... list of acceptable file formats the four-character file extensions for Microsoft Office 2007/2010... files from Office 2007 or Office 2010 in an Office 2003 format prior to submission. Dated: July 15, 2011...

UPIN Group File

Data.gov (United States)

U.S. Department of Health & Human Services — The Group Unique Physician Identifier Number (UPIN) File is the business entity file that contains the group practice UPIN and descriptive information. It does NOT...

Interoperability format translation and transformation between IFC architectural design file and simulation file formats

Science.gov (United States)

Chao, Tian-Jy; Kim, Younghun

2015-01-06

Automatically translating a building architecture file format (Industry Foundation Class) to a simulation file, in one aspect, may extract data and metadata used by a target simulation tool from a building architecture file. Interoperability data objects may be created and the extracted data is stored in the interoperability data objects. A model translation procedure may be prepared to identify a mapping from a Model View Definition to a translation and transformation function. The extracted data may be transformed using the data stored in the interoperability data objects, an input Model View Definition template, and the translation and transformation function to convert the extracted data to correct geometric values needed for a target simulation file format used by the target simulation tool. The simulation file in the target simulation file format may be generated.

12 CFR 5.4 - Filing required.

Science.gov (United States)

2010-01-01

... CORPORATE ACTIVITIES Rules of General Applicability § 5.4 Filing required. (a) Filing. A depository institution shall file an application or notice with the OCC to engage in corporate activities and... advise an applicant through a pre-filing communication to send the filing or submission directly to the...

Huygens file service and storage architecture

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

1993-01-01

The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

Huygens File Service and Storage Architecture

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

1993-01-01

The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

Apically extruded dentin debris by reciprocating single-file and multi-file rotary system.

Science.gov (United States)

De-Deus, Gustavo; Neves, Aline; Silva, Emmanuel João; Mendonça, Thais Accorsi; Lourenço, Caroline; Calixto, Camila; Lima, Edson Jorge Moreira

2015-03-01

This study aims to evaluate the apical extrusion of debris by the two reciprocating single-file systems: WaveOne and Reciproc. Conventional multi-file rotary system was used as a reference for comparison. The hypotheses tested were (i) the reciprocating single-file systems extrude more than conventional multi-file rotary system and (ii) the reciprocating single-file systems extrude similar amounts of dentin debris. After solid selection criteria, 80 mesial roots of lower molars were included in the present study. The use of four different instrumentation techniques resulted in four groups (n = 20): G1 (hand-file technique), G2 (ProTaper), G3 (WaveOne), and G4 (Reciproc). The apparatus used to evaluate the collection of apically extruded debris was typical double-chamber collector. Statistical analysis was performed for multiple comparisons. No significant difference was found in the amount of the debris extruded between the two reciprocating systems. In contrast, conventional multi-file rotary system group extruded significantly more debris than both reciprocating groups. Hand instrumentation group extruded significantly more debris than all other groups. The present results yielded favorable input for both reciprocation single-file systems, inasmuch as they showed an improved control of apically extruded debris. Apical extrusion of debris has been studied extensively because of its clinical relevance, particularly since it may cause flare-ups, originated by the introduction of bacteria, pulpal tissue, and irrigating solutions into the periapical tissues.

Building a parallel file system simulator

International Nuclear Information System (INIS)

Molina-Estolano, E; Maltzahn, C; Brandt, S A; Bent, J

2009-01-01

Parallel file systems are gaining in popularity in high-end computing centers as well as commercial data centers. High-end computing systems are expected to scale exponentially and to pose new challenges to their storage scalability in terms of cost and power. To address these challenges scientists and file system designers will need a thorough understanding of the design space of parallel file systems. Yet there exist few systematic studies of parallel file system behavior at petabyte- and exabyte scale. An important reason is the significant cost of getting access to large-scale hardware to test parallel file systems. To contribute to this understanding we are building a parallel file system simulator that can simulate parallel file systems at very large scale. Our goal is to simulate petabyte-scale parallel file systems on a small cluster or even a single machine in reasonable time and fidelity. With this simulator, file system experts will be able to tune existing file systems for specific workloads, scientists and file system deployment engineers will be able to better communicate workload requirements, file system designers and researchers will be able to try out design alternatives and innovations at scale, and instructors will be able to study very large-scale parallel file system behavior in the class room. In this paper we describe our approach and provide preliminary results that are encouraging both in terms of fidelity and simulation scalability.

76 FR 52323 - Combined Notice of Filings; Filings Instituting Proceedings

Science.gov (United States)

2011-08-22

.... Applicants: Young Gas Storage Company, Ltd. Description: Young Gas Storage Company, Ltd. submits tariff..., but intervention is necessary to become a party to the proceeding. The filings are accessible in the.... More detailed information relating to filing requirements, interventions, protests, and service can be...

Development of a coupled dynamics code with transport theory capability and application to accelerator driven systems transients

International Nuclear Information System (INIS)

Cahalan, J.E.; Ama, T.; Palmiotti, G.; Taiwo, T.A.; Yang, W.S.

2000-01-01

The VARIANT-K and DIF3D-K nodal spatial kinetics computer codes have been coupled to the SAS4A and SASSYS-1 liquid metal reactor accident and systems analysis codes. SAS4A and SASSYS-1 have been extended with the addition of heavy liquid metal (Pb and Pb-Bi) thermophysical properties, heat transfer correlations, and fluid dynamics correlations. The coupling methodology and heavy liquid metal modeling additions are described. The new computer code suite has been applied to analysis of neutron source and thermal-hydraulics transients in a model of an accelerator-driven minor actinide burner design proposed in an OECD/NEA/NSC benchmark specification. Modeling assumptions and input data generation procedures are described. Results of transient analyses are reported, with emphasis on comparison of P1 and P3 variational nodal transport theory results with nodal diffusion theory results, and on significance of spatial kinetics effects

Evaluated neutronic file for indium

International Nuclear Information System (INIS)

Smith, A.B.; Chiba, S.; Smith, D.L.; Meadows, J.W.; Guenther, P.T.; Lawson, R.D.; Howerton, R.J.

1990-01-01

A comprehensive evaluated neutronic data file for elemental indium is documented. This file, extending from 10 -5 eV to 20 MeV, is presented in the ENDF/B-VI format, and contains all neutron-induced processes necessary for the vast majority of neutronic applications. In addition, an evaluation of the 115 In(n,n') 116m In dosimetry reaction is presented as a separate file. Attention is given in quantitative values, with corresponding uncertainty information. These files have been submitted for consideration as a part of the ENDF/B-VI national evaluated-file system. 144 refs., 10 figs., 4 tabs

FHEO Filed Cases

Data.gov (United States)

Department of Housing and Urban Development — The dataset is a list of all the Title VIII fair housing cases filed by FHEO from 1/1/2007 - 12/31/2012 including the case number, case name, filing date, state and...

Experience feedback from the transportation of Framatome fuel assemblies

International Nuclear Information System (INIS)

Robin, M.E.; Gaillard, G.; Aubin, C.

1998-01-01

Framatome, the foremost world nuclear fuel manufacturer, has for 25 years been delivering fuel elements from its three factories (Dessel, Romans, Pierrelatte) to the various sites in France and abroad (Germany, Sweden, Belgium, China, Korea, South Africa, Switzerland). During this period, Framatome has built up experience and expertise in fuel element transportation by road, rail and sea. In this filed, the range of constraints is very wide: safety and environmental protection constraints; constraints arising from the control and protection of nuclear materials, contractual and financial constraints, media watchdogs. Through the experience feedback from the transportation of FRAMATOME assemblies, this paper addresses all the phases in the transportation of fresh fuel assemblies. (authors)

76 FR 62092 - Filing Procedures

Science.gov (United States)

2011-10-06

... INTERNATIONAL TRADE COMMISSION Filing Procedures AGENCY: International Trade Commission. ACTION: Notice of issuance of Handbook on Filing Procedures. SUMMARY: The United States International Trade Commission (``Commission'') is issuing a Handbook on Filing Procedures to replace its Handbook on Electronic...

12 CFR 1780.9 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Filing of papers. 1780.9 Section 1780.9 Banks... papers. (a) Filing. Any papers required to be filed shall be addressed to the presiding officer and filed... Director or the presiding officer. All papers filed by electronic media shall also concurrently be filed in...

%lrasch_mml: A SAS Macro for Marginal Maximum Likelihood Estimation in Longitudinal Polytomous Rasch Models

Directory of Open Access Journals (Sweden)

Maja Olsbjerg

2015-10-01

Full Text Available Item response theory models are often applied when a number items are used to measure a unidimensional latent variable. Originally proposed and used within educational research, they are also used when focus is on physical functioning or psychological wellbeing. Modern applications often need more general models, typically models for multidimensional latent variables or longitudinal models for repeated measurements. This paper describes a SAS macro that fits two-dimensional polytomous Rasch models using a specification of the model that is sufficiently flexible to accommodate longitudinal Rasch models. The macro estimates item parameters using marginal maximum likelihood estimation. A graphical presentation of item characteristic curves is included.

Reconstruction of point cross-section from ENDF data file for Monte Carlo applications

International Nuclear Information System (INIS)

Kumawat, H.; Saxena, A.; Carminati, F.; )

2016-12-01

Monte Carlo neutron transport codes are one of the best tools to simulate complex systems like fission and fusion reactors, Accelerator Driven Sub-critical systems, radio-activity management of spent fuel and waste, optimization and characterization of neutron detectors, optimization of Boron Neutron Capture Therapy, imaging etc. The neutron cross-section and secondary particle emission properties are the main input parameters of such codes. The fission, capture and elastic scattering cross-sections have complex resonating structures. Evaluated Nuclear Data File (ENDF) contains these cross-sections and secondary parameters. We report the development of reconstruction procedure to generate point cross-sections and probabilities from ENDF data file. The cross-sections are compared with the values obtained from PREPRO and in some cases NJOY codes. The results are in good agreement. (author)

The Jade File System. Ph.D. Thesis

Science.gov (United States)

Rao, Herman Chung-Hwa

1991-01-01

File systems have long been the most important and most widely used form of shared permanent storage. File systems in traditional time-sharing systems, such as Unix, support a coherent sharing model for multiple users. Distributed file systems implement this sharing model in local area networks. However, most distributed file systems fail to scale from local area networks to an internet. Four characteristics of scalability were recognized: size, wide area, autonomy, and heterogeneity. Owing to size and wide area, techniques such as broadcasting, central control, and central resources, which are widely adopted by local area network file systems, are not adequate for an internet file system. An internet file system must also support the notion of autonomy because an internet is made up by a collection of independent organizations. Finally, heterogeneity is the nature of an internet file system, not only because of its size, but also because of the autonomy of the organizations in an internet. The Jade File System, which provides a uniform way to name and access files in the internet environment, is presented. Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Because of autonomy, Jade is designed under the restriction that the underlying file systems may not be modified. In order to avoid the complexity of maintaining an internet-wide, global name space, Jade permits each user to define a private name space. In Jade's design, we pay careful attention to avoiding unnecessary network messages between clients and file servers in order to achieve acceptable performance. Jade's name space supports two novel features: (1) it allows multiple file systems to be mounted under one direction; and (2) it permits one logical name space to mount other logical name spaces. A prototype of Jade was implemented to examine and validate its

Annotated Computer Output for Illustrative Examples of Clustering Using the Mixture Method and Two Comparable Methods from SAS.

Science.gov (United States)

1987-06-26

BUREAU OF STANDAR-S1963-A Nw BOM -ILE COPY -. 4eo .?3sa.9"-,,A WIN* MAT HEMATICAL SCIENCES _*INSTITUTE AD-A184 687 DTICS!ELECTE ANNOTATED COMPUTER OUTPUT...intoduction to the use of mixture models in clustering. Cornell University Biometrics Unit Technical Report BU-920-M and Mathematical Sciences Institute...mixture method and two comparable methods from SAS. Cornell University Biometrics Unit Technical Report BU-921-M and Mathematical Sciences Institute

The Galley Parallel File System

Science.gov (United States)

Nieuwejaar, Nils; Kotz, David

1996-01-01

Most current multiprocessor file systems are designed to use multiple disks in parallel, using the high aggregate bandwidth to meet the growing I/0 requirements of parallel scientific applications. Many multiprocessor file systems provide applications with a conventional Unix-like interface, allowing the application to access multiple disks transparently. This interface conceals the parallelism within the file system, increasing the ease of programmability, but making it difficult or impossible for sophisticated programmers and libraries to use knowledge about their I/O needs to exploit that parallelism. In addition to providing an insufficient interface, most current multiprocessor file systems are optimized for a different workload than they are being asked to support. We introduce Galley, a new parallel file system that is intended to efficiently support realistic scientific multiprocessor workloads. We discuss Galley's file structure and application interface, as well as the performance advantages offered by that interface.

NJOY99, Data Processing System of Evaluated Nuclear Data Files ENDF Format

International Nuclear Information System (INIS)

2000-01-01

1 - Description of program or function: The NJOY nuclear data processing system is a modular computer code used for converting evaluated nuclear data in the ENDF format into libraries useful for applications calculations. Because the Evaluated Nuclear Data File (ENDF) format is used all around the world (e.g., ENDF/B-VI in the US, JEF-2.2 in Europe, JENDL-3.2 in Japan, BROND-2.2 in Russia), NJOY gives its users access to a wide variety of the most up-to-date nuclear data. NJOY provides comprehensive capabilities for processing evaluated data, and it can serve applications ranging from continuous-energy Monte Carlo (MCNP), through deterministic transport codes (DANT, ANISN, DORT), to reactor lattice codes (WIMS, EPRI). NJOY handles a wide variety of nuclear effects, including resonances, Doppler broadening, heating (KERMA), radiation damage, thermal scattering (even cold moderators), gas production, neutrons and charged particles, photo-atomic interactions, self shielding, probability tables, photon production, and high-energy interactions (to 150 MeV). Output can include printed listings, special library files for applications, and Postscript graphics (plus color). More information on NJOY is available from the developer's home page at http://t2.lanl.gov/tour/tourbus.html. Follow the Tourbus section of the Tour area to find notes from the ICTP lectures held at Trieste in March 2000 on the ENDF format and on the NJOY code. NJOY contains the following modules: NJOY directs the flow of data through the other modules and contains a library of common functions and subroutines used by the other modules. RECONR reconstructs pointwise (energy-dependent) cross sections from ENDF resonance parameters and interpolation schemes. BROADR Doppler broadens and thins pointwise cross sections. UNRESR computes effective self-shielded pointwise cross sections in the unresolved energy range. HEATR generates pointwise heat production cross sections (KERMA coefficients) and radiation

77 FR 25169 - Shipco Transport Inc. v. Jem Logistics, Inc., and Andi Georgescu, an Individual and D/B/A Jem...

Science.gov (United States)

2012-04-27

... FEDERAL MARITIME COMMISSION [Docket No. 12-06] Shipco Transport Inc. v. Jem Logistics, Inc., and Andi Georgescu, an Individual and D/B/A Jem Logistics, Inc.; Notice of Filing of Complaint and...) by Shipco Transport Inc. (Shipco), hereinafter ``Complainant,'' against Jem Logistics, Inc., and Andi...

78 FR 21930 - Aquenergy Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application...

Science.gov (United States)

2013-04-12

... Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application Document, and Approving Use of the Traditional Licensing Process a. Type of Filing: Notice of Intent to File License...: November 11, 2012. d. Submitted by: Aquenergy Systems, Inc., a fully owned subsidiaries of Enel Green Power...

12 CFR 16.33 - Filing fees.

Science.gov (United States)

2010-01-01

... Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY SECURITIES OFFERING DISCLOSURE RULES § 16.33 Filing fees. (a) Filing fees must accompany certain filings made under the provisions of this part... Comptroller of the Currency Fees published pursuant to § 8.8 of this chapter. (b) Filing fees must be paid by...

75 FR 4689 - Electronic Tariff Filings

Science.gov (United States)

2010-01-29

... elements ``are required to properly identify the nature of the tariff filing, organize the tariff database... (or other pleading) and the Type of Filing code chosen will be resolved in favor of the Type of Filing...'s wish expressed in its transmittal letter or in other pleadings, the Commission may not review a...

GEOS-5 Chemistry Transport Model User's Guide

Science.gov (United States)

Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

2015-01-01

The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

Low-level radioactive waste transportation safety history

International Nuclear Information System (INIS)

McClure, J.D.

1997-01-01

The Radioactive Materials Incident Report (RMIR) database was developed fin 1981 at the Transportation Technology Center of Sandia National Laboratories to support its research and development activities for the US department of Energy (DOE). This database contains information about radioactive material (RAM) transportation incidents that have occurred in the US since 1971. These data were drawn from the US Department of Transportation's (DOT) Hazardous Materials Incident Report system, from Nuclear Regulatory Commission (NRC) files, and from various agencies including state radiological control offices. Support for the RMIR data base is funded by the US DOE National Transportation Program (NTP). Transportation events in RMIR are classified in one of the following ways: as a transportation accident, as a handling accident, or as a reported incident. This presentation will provide definitions for these classifications and give examples of each. The primary objective of this presentation is to provide information on nuclear materials transportation accident/incident events involving low-level waste (LLW) that have occurred in the US for the period 1971 through 1996. Among the areas to be examined are: transportation accidents by mode, package response during accidents, and an examination of accidents where release of contents has occurred. Where information is available, accident and incident history and package response for LLW packages in transportation accidents will be described

78 FR 75554 - Combined Notice of Filings

Science.gov (United States)

2013-12-12

...-000. Applicants: Young Gas Storage Company, Ltd. Description: Young Fuel Reimbursement Filing to be.... Protests may be considered, but intervention is necessary to become a party to the proceeding. eFiling is... qualifying facilities filings can be found at: http://www.ferc.gov/docs-filing/efiling/filing-req.pdf . For...

Small file aggregation in a parallel computing system

Science.gov (United States)

Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Zhang, Jingwang

2014-09-02

Techniques are provided for small file aggregation in a parallel computing system. An exemplary method for storing a plurality of files generated by a plurality of processes in a parallel computing system comprises aggregating the plurality of files into a single aggregated file; and generating metadata for the single aggregated file. The metadata comprises an offset and a length of each of the plurality of files in the single aggregated file. The metadata can be used to unpack one or more of the files from the single aggregated file.

5 CFR 1203.13 - Filing pleadings.

Science.gov (United States)

2010-01-01

... delivery, by facsimile, or by e-filing in accordance with § 1201.14 of this chapter. If the document was... submitted by e-filing, it is considered to have been filed on the date of electronic submission. (e... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Filing pleadings. 1203.13 Section 1203.13...

Regional Atmospheric Transport Code for Hanford Emission Tracking, Version 2 (RATCHET2)

International Nuclear Information System (INIS)

Ramsdell, James V.; Rishel, Jeremy P.

2006-01-01

This manual describes the atmospheric model and computer code for the Atmospheric Transport Module within SAC. The Atmospheric Transport Module, called RATCHET2, calculates the time-integrated air concentration and surface deposition of airborne contaminants to the soil. The RATCHET2 code is an adaptation of the Regional Atmospheric Transport Code for Hanford Emissions Tracking (RATCHET). The original RATCHET code was developed to perform the atmospheric transport for the Hanford Environmental Dose Reconstruction Project. Fundamentally, the two sets of codes are identical; no capabilities have been deleted from the original version of RATCHET. Most modifications are generally limited to revision of the run-specification file to streamline the simulation process for SAC.

Regional Atmospheric Transport Code for Hanford Emission Tracking, Version 2(RATCHET2)

Energy Technology Data Exchange (ETDEWEB)

Ramsdell, James V.; Rishel, Jeremy P.

2006-07-01

This manual describes the atmospheric model and computer code for the Atmospheric Transport Module within SAC. The Atmospheric Transport Module, called RATCHET2, calculates the time-integrated air concentration and surface deposition of airborne contaminants to the soil. The RATCHET2 code is an adaptation of the Regional Atmospheric Transport Code for Hanford Emissions Tracking (RATCHET). The original RATCHET code was developed to perform the atmospheric transport for the Hanford Environmental Dose Reconstruction Project. Fundamentally, the two sets of codes are identical; no capabilities have been deleted from the original version of RATCHET. Most modifications are generally limited to revision of the run-specification file to streamline the simulation process for SAC.

PFS: a distributed and customizable file system

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

In this paper we present our ongoing work on the Pegasus File System (PFS), a distributed and customizable file system that can be used for off-line file system experiments and on-line file system storage. PFS is best described as an object-oriented component library from which either a true file

76 FR 61351 - Combined Notice of Filings #1

Science.gov (United States)

2011-10-04

... MBR Baseline Tariff Filing to be effective 9/22/2011. Filed Date: 09/22/2011. Accession Number... submits tariff filing per 35.1: ECNY MBR Re-File to be effective 9/22/2011. Filed Date: 09/22/2011... Industrial Energy Buyers, LLC submits tariff filing per 35.1: NYIEB MBR Re-File to be effective 9/22/2011...

Technical support for a proposed decay heat guide using SAS2H/ORIGEN-S data

International Nuclear Information System (INIS)

Hermann, O.W.; Parks, C.V.; Renier, J.P.

1994-09-01

Major revisions are proposed to the current US Nuclear Regulatory Commission decay heat rate guide entitled ''Regulatory Guide 3.54, Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation,'' using a new data base produced by the SAS2H analysis sequence of the SCALE-4 system. The data base for the proposed guide revision has been significantly improved by increasing the number and range of parameters that generally characterize pressurized-water-reactor (PWR) and boiling-water-reactor (BWR) spent fuel assemblies. Using generic PWR and BWR assembly models, calculations were performed with each model for six different burnups at each of three separate specific powers to produce heat rates at 20 cooling times in the range of 1 to 110 y. The proposed procedure specifies proper interpolation formulae for the tabulated heat generation rates. Adjustment formulae for the interpolated values are provided to account for differences in initial 235 U enrichment and changes in the specific power of a cycle from the average value. Finally, safety factor formulae were derived as a function of burnup, cooling time, and type of reactor. The proposed guide revision was designed to be easier to use. Also, the complete data base and guide procedure is incorporated into an interactive code called LWRARC which can be executed on a personal computer. The report shows adequate comparisons of heat rates computed by SAS2H/ORIGEN-S and measurements for 10 BWR and 10 PWR fuel assemblies. The average differences of the computed minus the measured heat rates of fuel assemblies were -07 ± 2.6% for the BWR and 1.5 ± 1.3% for the PWR. In addition, a detailed analysis of the proposed procedure indicated the method and equations to be valid

Deceit: A flexible distributed file system

Science.gov (United States)

Siegel, Alex; Birman, Kenneth; Marzullo, Keith

1989-01-01

Deceit, a distributed file system (DFS) being developed at Cornell, focuses on flexible file semantics in relation to efficiency, scalability, and reliability. Deceit servers are interchangeable and collectively provide the illusion of a single, large server machine to any clients of the Deceit service. Non-volatile replicas of each file are stored on a subset of the file servers. The user is able to set parameters on a file to achieve different levels of availability, performance, and one-copy serializability. Deceit also supports a file version control mechanism. In contrast with many recent DFS efforts, Deceit can behave like a plain Sun Network File System (NFS) server and can be used by any NFS client without modifying any client software. The current Deceit prototype uses the ISIS Distributed Programming Environment for all communication and process group management, an approach that reduces system complexity and increases system robustness.

10 CFR 110.89 - Filing and service.

Science.gov (United States)

2010-01-01

...: Rulemakings and Adjudications Staff or via the E-Filing system, following the procedure set forth in 10 CFR 2.302. Filing by mail is complete upon deposit in the mail. Filing via the E-Filing system is completed... residence with some occupant of suitable age and discretion; (2) Following the requirements for E-Filing in...

49 CFR 1104.6 - Timely filing required.

Science.gov (United States)

2010-10-01

... offers next day delivery to Washington, DC. If the e-filing option is chosen (for those pleadings and documents that are appropriate for e-filing, as determined by reference to the information on the Board's Web site), then the e-filed pleading or document is timely filed if the e-filing process is completed...

DICOM supported sofware configuration by XML files

International Nuclear Information System (INIS)

LucenaG, Bioing Fabian M; Valdez D, Andres E; Gomez, Maria E; Nasisi, Oscar H

2007-01-01

A method for the configuration of informatics systems that provide support to DICOM standards using XML files is proposed. The difference with other proposals is base on that this system does not code the information of a DICOM objects file, but codes the standard itself in an XML file. The development itself is the format for the XML files mentioned, in order that they can support what DICOM normalizes for multiple languages. In this way, the same configuration file (or files) can be use in different systems. Jointly the XML configuration file generated, we wrote also a set of CSS and XSL files. So the same file can be visualized in a standard browser, as a query system of DICOM standard, emerging use, that did not was a main objective but brings a great utility and versatility. We exposed also some uses examples of the configuration file mainly in relation with the load of DICOM information objects. Finally, at the conclusions we show the utility that the system has already provided when the edition of DICOM standard changes from 2006 to 2007

Pre- and post-processor for the wool won transport code

CERN Document Server

Fawley, W M

2001-01-01

ICOOL is a Fortran77 macroparticle transport code widely used by researchers to study the front end of a neutrino factory/muon collider. In part due to the desire that ICOOL be usable over multiple computer platforms and operating systems, the code uses simple text files for input/output services. This choice together with user-driven requests for greater and greater choice of lattice element type and configuration has led to ICOOL input decks becoming rather difficult to compose and modify easily. Moreover, the lack of a standard graphical postprocessor has prevented many ICOOL users from extracting all but the most simple results from the output files. Here I present two attempts to improve this situation: First, a simple but quite general graphical pre-processor (NIME) written in the Tcl/TK to permit users to write and maintain ASCII-formatted input files by use of simple macro definitions and expansions. Second, an interactive postprocessor written in Fortran90 and NCAR graphics, which allows users to def...

[Comparison of effectiveness and safety between Twisted File technique and ProTaper Universal rotary full sequence based on micro-computed tomography].

Science.gov (United States)

Chen, Xiao-bo; Chen, Chen; Liang, Yu-hong

2016-02-18

To evaluate the efficacy and security of two type of rotary nickel titanium system (Twisted File and ProTaper Universal) for root canal preparation based on micro-computed tomography(micro-CT). Twenty extracted molars (including 62 canals) were divided into two experimental groups and were respectively instrumented using Twisted File rotary nickel titanium system (TF) and ProTaper Universal rotary nickel titanium system (PU) to #25/0.08 following recommended protocol. Time for root canal instrumentation (accumulation of time for every single file) was recorded. The 0-3 mm root surface from apex was observed under an optical stereomicroscope at 25 × magnification. The presence of crack line was noted. The root canals were scanned with micro-CT before and after root canal preparation. Three-dimensional shape images of canals were reconstructed, calculated and evaluated. The amount of canal central transportation of the two groups was calculated and compared. The shorter preparation time [(0.53 ± 0.14) min] was observed in TF group, while the preparation time of PU group was (2.06 ± 0.39) min (Pvs. (0.097 ± 0.084) mm, P<0.05]. No instrument separation was observed in both the groups. Cracks were not found in both the groups either based in micro-CT images or observation under an optical stereomicroscope at 25 × magnification. Compared with ProTaper Universal, Twisted File took less time in root canal preparation and exhibited better shaping ability, and less canal transportation.

SPSS and SAS programs for determining the number of components using parallel analysis and velicer's MAP test.

Science.gov (United States)

O'Connor, B P

2000-08-01

Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.

12 CFR 908.25 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Filing of papers. 908.25 Section 908.25 Banks... RULES OF PRACTICE AND PROCEDURE IN HEARINGS ON THE RECORD General Rules § 908.25 Filing of papers. (a) Filing. Any papers required to be filed shall be addressed to the presiding officer and filed with the...

PFS: a distributed and customizable file system

OpenAIRE

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

In this paper we present our ongoing work on the Pegasus File System (PFS), a distributed and customizable file system that can be used for off-line file system experiments and on-line file system storage. PFS is best described as an object-oriented component library from which either a true file system or a file-system simulator can be constructed. Each of the components in the library is easily replaced by another implementation to accommodate a wide range of applications.

Detecting Malicious Code by Binary File Checking

Directory of Open Access Journals (Sweden)

Marius POPA

2014-01-01

Full Text Available The object, library and executable code is stored in binary files. Functionality of a binary file is altered when its content or program source code is changed, causing undesired effects. A direct content change is possible when the intruder knows the structural information of the binary file. The paper describes the structural properties of the binary object files, how the content can be controlled by a possible intruder and what the ways to identify malicious code in such kind of files. Because the object files are inputs in linking processes, early detection of the malicious content is crucial to avoid infection of the binary executable files.

Formalizing a hierarchical file system

NARCIS (Netherlands)

Hesselink, Wim H.; Lali, Muhammad Ikram

An abstract file system is defined here as a partial function from (absolute) paths to data. Such a file system determines the set of valid paths. It allows the file system to be read and written at a valid path, and it allows the system to be modified by the Unix operations for creation, removal,

A SAS-based solution to evaluate study design efficiency of phase I pediatric oncology trials via discrete event simulation.

Science.gov (United States)

Barrett, Jeffrey S; Jayaraman, Bhuvana; Patel, Dimple; Skolnik, Jeffrey M

2008-06-01

Previous exploration of oncology study design efficiency has focused on Markov processes alone (probability-based events) without consideration for time dependencies. Barriers to study completion include time delays associated with patient accrual, inevaluability (IE), time to dose limiting toxicities (DLT) and administrative and review time. Discrete event simulation (DES) can incorporate probability-based assignment of DLT and IE frequency, correlated with cohort in the case of DLT, with time-based events defined by stochastic relationships. A SAS-based solution to examine study efficiency metrics and evaluate design modifications that would improve study efficiency is presented. Virtual patients are simulated with attributes defined from prior distributions of relevant patient characteristics. Study population datasets are read into SAS macros which select patients and enroll them into a study based on the specific design criteria if the study is open to enrollment. Waiting times, arrival times and time to study events are also sampled from prior distributions; post-processing of study simulations is provided within the decision macros and compared across designs in a separate post-processing algorithm. This solution is examined via comparison of the standard 3+3 decision rule relative to the "rolling 6" design, a newly proposed enrollment strategy for the phase I pediatric oncology setting.

77 FR 74839 - Combined Notice of Filings

Science.gov (United States)

2012-12-18

..., LP. Description: National Grid LNG, LP submits tariff filing per 154.203: Adoption of NAESB Version 2... with Order to Amend NAESB Version 2.0 Filing to be effective 12/1/2012. Filed Date: 12/11/12. Accession...: Refile to comply with Order on NAESB Version 2.0 Filing to be effective 12/1/2012. Filed Date: 12/11/12...

MDP: Reliable File Transfer for Space Missions

Science.gov (United States)

Rash, James; Criscuolo, Ed; Hogie, Keith; Parise, Ron; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

This paper presents work being done at NASA/GSFC by the Operating Missions as Nodes on the Internet (OMNI) project to demonstrate the application of the Multicast Dissemination Protocol (MDP) to space missions to reliably transfer files. This work builds on previous work by the OMNI project to apply Internet communication technologies to space communication. The goal of this effort is to provide an inexpensive, reliable, standard, and interoperable mechanism for transferring files in the space communication environment. Limited bandwidth, noise, delay, intermittent connectivity, link asymmetry, and one-way links are all possible issues for space missions. Although these are link-layer issues, they can have a profound effect on the performance of transport and application level protocols. MDP, a UDP-based reliable file transfer protocol, was designed for multicast environments which have to address these same issues, and it has done so successfully. Developed by the Naval Research Lab in the mid 1990's, MDP is now in daily use by both the US Post Office and the DoD. This paper describes the use of MDP to provide automated end-to-end data flow for space missions. It examines the results of a parametric study of MDP in a simulated space link environment and discusses the results in terms of their implications for space missions. Lessons learned are addressed, which suggest minor enhancements to the MDP user interface to add specific features for space mission requirements, such as dynamic control of data rate, and a checkpoint/resume capability. These are features that are provided for in the protocol, but are not implemented in the sample MDP application that was provided. A brief look is also taken at the status of standardization. A version of MDP known as NORM (Neck Oriented Reliable Multicast) is in the process of becoming an IETF standard.

Formalizing a Hierarchical File System

NARCIS (Netherlands)

Hesselink, Wim H.; Lali, M.I.

2009-01-01

In this note, we define an abstract file system as a partial function from (absolute) paths to data. Such a file system determines the set of valid paths. It allows the file system to be read and written at a valid path, and it allows the system to be modified by the Unix operations for removal

77 FR 35371 - Combined Notice of Filings #1

Science.gov (United States)

2012-06-13

.... Applicants: Duke Energy Miami Fort, LLC. Description: MBR Filing to be effective 10/1/2012. Filed Date: 6/5...-000. Applicants: Duke Energy Piketon, LLC. Description: MBR Filing to be effective 10/1/2012. Filed...-1959-000. Applicants: Duke Energy Stuart, LLC. Description: MBR Filing to be effective 10/1/2012. Filed...

Virtual file system for PSDS

Science.gov (United States)

Runnels, Tyson D.

1993-01-01

This is a case study. It deals with the use of a 'virtual file system' (VFS) for Boeing's UNIX-based Product Standards Data System (PSDS). One of the objectives of PSDS is to store digital standards documents. The file-storage requirements are that the files must be rapidly accessible, stored for long periods of time - as though they were paper, protected from disaster, and accumulative to about 80 billion characters (80 gigabytes). This volume of data will be approached in the first two years of the project's operation. The approach chosen is to install a hierarchical file migration system using optical disk cartridges. Files are migrated from high-performance media to lower performance optical media based on a least-frequency-used algorithm. The optical media are less expensive per character stored and are removable. Vital statistics about the removable optical disk cartridges are maintained in a database. The assembly of hardware and software acts as a single virtual file system transparent to the PSDS user. The files are copied to 'backup-and-recover' media whose vital statistics are also stored in the database. Seventeen months into operation, PSDS is storing 49 gigabytes. A number of operational and performance problems were overcome. Costs are under control. New and/or alternative uses for the VFS are being considered.

SPSS and SAS procedures for estimating indirect effects in simple mediation models.

Science.gov (United States)

Preacher, Kristopher J; Hayes, Andrew F

2004-11-01

Researchers often conduct mediation analysis in order to indirectly assess the effect of a proposed cause on some outcome through a proposed mediator. The utility of mediation analysis stems from its ability to go beyond the merely descriptive to a more functional understanding of the relationships among variables. A necessary component of mediation is a statistically and practically significant indirect effect. Although mediation hypotheses are frequently explored in psychological research, formal significance tests of indirect effects are rarely conducted. After a brief overview of mediation, we argue the importance of directly testing the significance of indirect effects and provide SPSS and SAS macros that facilitate estimation of the indirect effect with a normal theory approach and a bootstrap approach to obtaining confidence intervals, as well as the traditional approach advocated by Baron and Kenny (1986). We hope that this discussion and the macros will enhance the frequency of formal mediation tests in the psychology literature. Electronic copies of these macros may be downloaded from the Psychonomic Society's Web archive at www.psychonomic.org/archive/.

76 FR 63291 - Combined Notice Of Filings #1

Science.gov (United States)

2011-10-12

... filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession Number: 20110923.... submits tariff filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession.... submits tariff filing per 35: MBR Tariff to be effective 9/23/2011. Filed Date: 09/23/2011. Accession...

Titanium-II: an evaluated nuclear data file

International Nuclear Information System (INIS)

Philis, C.; Howerton, R.; Smith, A.B.

1977-06-01

A comprehensive evaluated nuclear data file for elemental titanium is outlined including definition of the data base, the evaluation procedures and judgments, and the final evaluated results. The file describes all significant neutron-induced reactions with elemental titanium and the associated photon-production processes to incident neutron energies of 20.0 MeV. In addition, isotopic-reaction files, consistent with the elemental file, are separately defined for those processes which are important to applied considerations of material-damage and neutron-dosimetry. The file is formulated in the ENDF format. This report formally documents the evaluation and, together with the numerical file, is submitted for consideration as a part of the ENDF/B-V evaluated file system. 20 figures, 9 tables

Automatic modeling for the monte carlo transport TRIPOLI code

International Nuclear Information System (INIS)

Zhang Junjun; Zeng Qin; Wu Yican; Wang Guozhong; FDS Team

2010-01-01

TRIPOLI, developed by CEA, France, is Monte Carlo particle transport simulation code. It has been widely applied to nuclear physics, shielding design, evaluation of nuclear safety. However, it is time-consuming and error-prone to manually describe the TRIPOLI input file. This paper implemented bi-directional conversion between CAD model and TRIPOLI model. Its feasibility and efficiency have been demonstrated by several benchmarking examples. (authors)

EOS7R: Radionuclide transport for TOUGH2

International Nuclear Information System (INIS)

Oldenburg, C.M.; Pruess, K.

1995-11-01

EOS7R provides radionuclide transport capability for TOUGH2. EOS7R extends the EOS7 module (water, brine, and optional air) to model water, brine, parent component, daughter component, and optional air and heat. The radionuclide components follow a first-order decay law, and may adsorb onto the solid grains. Volatilization of the decaying components is modeled by Henry's Law. The decaying components are normally referred to as radionuclides, but they may in fact by any trace components that decay, adsorb, and volatilize. The decay process need not be radioactive decay, but could be any process that follows a first-order decay law, such as biodegradation. EOS7R includes molecular diffusion for all components in gaseous and aqueous phases using a simplified binary diffusion model. When EOS7R is used with standard TOUGH2, transport occurs by advection and molecular diffusion in all phases. When EOS7R is coupled with the dispersion module T2DM, one obtains T2DMR, the radionuclide transport version of T2DM. T2DMR models advection, diffusion, and hydrodynamic dispersion in rectangular two-dimensional regions. Modeling of radionuclide transport requires input parameters specifying the half-life for first-order decay, distribution coefficients for each rock type for adsorption, and inverse Henry's constants for volatilization. Options can be specified in the input file to model decay in inactive grid blocks and to read from standard EOS7 INCON files. The authors present a number of example problems to demonstrate application and accuracy of TOUGH2/EOS7R. One-dimensional simulation results agree well with analytical solutions. For a two-dimensional salt-dome flow problem, the final distribution of daughter radionuclide component is complicated by the presence of weak recirculation caused by density effects due to salinity

Preservation of root canal anatomy using self-adjusting file instrumentation with glide path prepared by 20/0.02 hand files versus 20/0.04 rotary files

Science.gov (United States)

Jain, Niharika; Pawar, Ajinkya M.; Ukey, Piyush D.; Jain, Prashant K.; Thakur, Bhagyashree; Gupta, Abhishek

2017-01-01

Objectives: To compare the relative axis modification and canal concentricity after glide path preparation with 20/0.02 hand K-file (NITIFLEX®) and 20/0.04 rotary file (HyFlex™ CM) with subsequent instrumentation with 1.5 mm self-adjusting file (SAF). Materials and Methods: One hundred and twenty ISO 15, 0.02 taper, Endo Training Blocks (Dentsply Maillefer, Ballaigues, Switzerland) were acquired and randomly divided into following two groups (n = 60): group 1, establishing glide path till 20/0.02 hand K-file (NITIFLEX®) followed by instrumentation with 1.5 mm SAF; and Group 2, establishing glide path till 20/0.04 rotary file (HyFlex™ CM) followed by instrumentation with 1.5 mm SAF. Pre- and post-instrumentation digital images were processed with MATLAB R 2013 software to identify the central axis, and then superimposed using digital imaging software (Picasa 3.0 software, Google Inc., California, USA) taking five landmarks as reference points. Student's t-test for pairwise comparisons was applied with the level of significance set at 0.05. Results: Training blocks instrumented with 20/0.04 rotary file and SAF were associated less deviation in canal axis (at all the five marked points), representing better canal concentricity compared to those, in which glide path was established by 20/0.02 hand K-files followed by SAF instrumentation. Conclusion: Canal geometry is better maintained after SAF instrumentation with a prior glide path established with 20/0.04 rotary file. PMID:28855752

76 FR 28018 - Combined Notice of Filings #1

Science.gov (United States)

2011-05-13

... tariff filing per 35.13(a)(2)(iii: Information Policy Revisions to be effective 6/20/ 2011. Filed Date... Interconnection, L.L.C. Description: PJM Interconnection, L.L.C. submits tariff filing per 35.13(a)(2)(iii: Queue... New Mexico submits tariff filing per 35.13(a)(2)(iii: PNM LGIP Filing to be effective 7/5/2011. Filed...

75 FR 62381 - Combined Notice of Filings #2

Science.gov (United States)

2010-10-08

... filing per 35.12: MeadWestvaco Virginia MBR Filing to be effective 9/ 28/2010. Filed Date: 09/29/2010... submits tariff filing per 35.12: City Power MBR Tariff to be effective 9/30/2010. Filed Date: 09/29/2010... Baseline MBR Tariff to be effective 9[sol]29[sol]2010. Filed Date: 09/29/2010. Accession Number: 20100929...

78 FR 62362 - Revisions to Procedural Regulations Governing Transportation by Intrastate Pipelines; Electronic...

Science.gov (United States)

2013-10-21

...] Revisions to Procedural Regulations Governing Transportation by Intrastate Pipelines; Electronic Tariff... under the Commission's jurisdiction pursuant to the Natural Gas Policy Act of 1978 or the Natural Gas Act.\\1\\ Take notice that, effective November 12, 2013, the list of available eTariff Type of Filing...

Effect of propolis extract on angelfish larval performance and transport

Directory of Open Access Journals (Sweden)

Douglas da Cruz Mattos

2017-06-01

Full Text Available This study aimed to evaluate the influence propolis extract inclusion to the feed mixture for juvenile angelfish (Pterophyllum scalare on larval performance and transport. Levels of propolis extract inclusion consisted of 0, 300, 600, 900, and 1200 mg.kg-1 of feed. After 14 days of hatching, unmetamorphosed larvae with a total length of 18.4 mm and 0.11 g initial weight were used. Six-hundred larvae were divided into 20 experimental units, totalizing 30 larvae each. Experimental units consisted of polythene containers with independent water input and output and a level controller. Each unit was controlled for maintenance of 40 L water within a recirculation system. After offering feed containing propolis extract, five fish from each experimental unit were packed in bags for transportation only with atmospheric air, without pure oxygen addition. The bags were filled with 300 mL water on a 2:1 basis of air and water respectively. The total transport time was considered until the death of the third fish in package. At the end of the experiment, data underwent statistical analysis through Statistical Analysis System (SAS, 2001. Results showed there was no significant difference (P < 0.05 neither for any of the studied zootechnical variables (standard length, total length, height, and weight nor for the transport of juveniles. In conclusion, propolis extract addition to angelfish feed was ineffective for larval performance and for transportation of juveniles, at the levels tested here.

77 FR 13587 - Combined Notice of Filings

Science.gov (United States)

2012-03-07

.... Applicants: Transcontinental Gas Pipe Line Company. Description: Annual Electric Power Tracker Filing... Company. Description: 2012 Annual Fuel and Electric Power Reimbursement to be effective 4/1/2012. Filed... submits tariff filing per 154.403: Storm Surcharge 2012 to be effective 4/1/2012. Filed Date: 3/1/12...

10 CFR 2.302 - Filing of documents.

Science.gov (United States)

2010-01-01

... this part shall be electronically transmitted through the E-Filing system, unless the Commission or... all methods of filing have been completed. (e) For filings by electronic transmission, the filer must... digital ID certificates, the NRC permits participants in the proceeding to access the E-Filing system to...

5 CFR 1201.14 - Electronic filing procedures.

Science.gov (United States)

2010-01-01

... form. (b) Matters subject to electronic filing. Subject to the registration requirement of paragraph (e) of this section, parties and representatives may use electronic filing (e-filing) to do any of the...). (d) Internet is sole venue for electronic filing. Following the instructions at e-Appeal Online, the...

The File System Interface is an Anachronism

OpenAIRE

Ellard, Daniel

2003-01-01

Contemporary file systems implement a set of abstractions and semantics that are suboptimal for many (if not most) purposes. The philosophy of using the simple mechanisms of the file system as the basis for a vast array of higher-level mechanisms leads to inefficient and incorrect implementations. We propose several extensions to the canonical file system model, including explicit support for lock files, indexed files, and resource forks, and the benefit of session semantics for write updates...

High School and Beyond: Twins and Siblings' File Users' Manual, User's Manual for Teacher Comment File, Friends File Users' Manual.

Science.gov (United States)

National Center for Education Statistics (ED), Washington, DC.

These three users' manuals are for specific files of the High School and Beyond Study, a national longitudinal study of high school sophomores and seniors in 1980. The three files are computerized databases that are available on magnetic tape. As one component of base year data collection, information identifying twins, triplets, and some non-twin…

Menggabungkan Beberapa File Dalam SPSS/PC

Directory of Open Access Journals (Sweden)

Syahrudji Naseh

2012-09-01

Full Text Available Pada dasamya piranti lunak komputer dapat dibagi ke dalam lima kelompok besar yaitu pengolah kata, spreadsheet database, statistika dan animasi/desktop. Masing-masing mempunyai kelebihan dan kekurangannya. Piranti lunak dBase 111+ yang merupakan piranti lunak paling populer dalam"database", hanya dapat menampung 128 variabel saja. Oleh karenanya pada suatu kuesioner yang besar seperti Susenas (Survei Sosial Ekonomi Nasional atau SKRT (Survei Kesehatan Rumah Tangga, datanya tidak dapat dijadikan satu "file". Biasanya dipecah menjadi banyak "file", umpamanya fileldbf, file2.dbf dan seterusnya.Masalahnya adalah bagaimana menggabung beberapa variabel yang ada di file1.dbf engan beberapa variabel yang ada di file5.dbf? Tulisan ini mencoba membahas masalah tersebut

76 FR 70651 - Fee for Filing a Patent Application Other Than by the Electronic Filing System

Science.gov (United States)

2011-11-15

... government; or (3) preempt tribal law. Therefore, a tribal summary impact statement is not required under... 0651-AC64 Fee for Filing a Patent Application Other Than by the Electronic Filing System AGENCY: United..., that is not filed by electronic means as prescribed by the Director of the United States Patent and...

Earnings Public-Use File, 2006

Data.gov (United States)

Social Security Administration — Social Security Administration released Earnings Public-Use File (EPUF) for 2006. File contains earnings information for individuals drawn from a systematic random...

12 CFR 509.10 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Filing of papers. 509.10 Section 509.10 Banks... IN ADJUDICATORY PROCEEDINGS Uniform Rules of Practice and Procedure § 509.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request...

47 CFR 61.14 - Method of filing publications.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Method of filing publications. 61.14 Section 61...) TARIFFS Rules for Electronic Filing § 61.14 Method of filing publications. (a) Publications filed... date of a publication received by the Electronic Tariff Filing System will be determined by the date...

12 CFR 263.10 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Filing of papers. 263.10 Section 263.10 Banks... OF PRACTICE FOR HEARINGS Uniform Rules of Practice and Procedure § 263.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request...

12 CFR 308.10 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Filing of papers. 308.10 Section 308.10 Banks... AND PROCEDURE Uniform Rules of Practice and Procedure § 308.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding documents produced in response to a discovery request pursuant to...

Rn3D: A finite element code for simulating gas flow and radon transport in variably saturated, nonisothermal porous media

International Nuclear Information System (INIS)

Holford, D.J.

1994-01-01

This document is a user's manual for the Rn3D finite element code. Rn3D was developed to simulate gas flow and radon transport in variably saturated, nonisothermal porous media. The Rn3D model is applicable to a wide range of problems involving radon transport in soil because it can simulate either steady-state or transient flow and transport in one-, two- or three-dimensions (including radially symmetric two-dimensional problems). The porous materials may be heterogeneous and anisotropic. This manual describes all pertinent mathematics related to the governing, boundary, and constitutive equations of the model, as well as the development of the finite element equations used in the code. Instructions are given for constructing Rn3D input files and executing the code, as well as a description of all output files generated by the code. Five verification problems are given that test various aspects of code operation, complete with example input files, FORTRAN programs for the respective analytical solutions, and plots of model results. An example simulation is presented to illustrate the type of problem Rn3D is designed to solve. Finally, instructions are given on how to convert Rn3D to simulate systems other than radon, air, and water

29 CFR 1981.103 - Filing of discrimination complaint.

Science.gov (United States)

2010-07-01

... constitute the violations. (c) Place of filing. The complaint should be filed with the OSHA Area Director... or she has been discriminated against by an employer in violation of the Act may file, or have filed..., but may be filed with any OSHA officer or employee. Addresses and telephone numbers for these...

77 FR 66458 - Combined Notice of Filings #1

Science.gov (United States)

2012-11-05

... Service Company of Colorado. Description: 2012--10--26 PSCo MBR Filing to be effective 12/26/ 2012. Filed...--SPS MBR Filing to be effective 12/26/2012. Filed Date: 10/26/12. Accession Number: 20121026-5123...: Revised Application for MBR Authorization to be effective 10/16/2012. Filed Date: 10/25/12. Accession...

75 FR 66075 - Combined Notice of Filings #1

Science.gov (United States)

2010-10-27

....12: Baseline MBR Concurrence to be effective 10/8/2010. Filed Date: 10/19/2010. Accession Number... Company submits tariff filing per 35.12: Baseline MBR Concurrence to be effective 10/8/2010. Filed Date... Power Company submits tariff filing per 35.12: Baseline MBR Concurrence to be effective 10/8/2010. Filed...

The Global File System

Science.gov (United States)

Soltis, Steven R.; Ruwart, Thomas M.; OKeefe, Matthew T.

1996-01-01

The global file system (GFS) is a prototype design for a distributed file system in which cluster nodes physically share storage devices connected via a network-like fiber channel. Networks and network-attached storage devices have advanced to a level of performance and extensibility so that the previous disadvantages of shared disk architectures are no longer valid. This shared storage architecture attempts to exploit the sophistication of storage device technologies whereas a server architecture diminishes a device's role to that of a simple component. GFS distributes the file system responsibilities across processing nodes, storage across the devices, and file system resources across the entire storage pool. GFS caches data on the storage devices instead of the main memories of the machines. Consistency is established by using a locking mechanism maintained by the storage devices to facilitate atomic read-modify-write operations. The locking mechanism is being prototyped in the Silicon Graphics IRIX operating system and is accessed using standard Unix commands and modules.

12 CFR 19.10 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Filing of papers. 19.10 Section 19.10 Banks and... Rules of Practice and Procedure § 19.10 Filing of papers. (a) Filing. Any papers required to be filed...) Delivering the papers to a reliable commercial courier service, overnight delivery service, or to the U.S...

12 CFR 747.10 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Filing of papers. 747.10 Section 747.10 Banks... Practice and Procedure § 747.10 Filing of papers. (a) Filing. Any papers required to be filed, excluding...) Delivering the papers to a reliable commercial courier service, overnight delivery service, or to the U.S...

Root Canal Transportation and Centering Ability of Nickel-Titanium Rotary Instruments in Mandibular Premolars Assessed Using Cone-Beam Computed Tomography.

Science.gov (United States)

Mamede-Neto, Iussif; Borges, Alvaro Henrique; Guedes, Orlando Aguirre; de Oliveira, Durvalino; Pedro, Fábio Luis Miranda; Estrela, Carlos

2017-01-01

The aim of this study was to evaluate, using cone-beam computed tomography (CBCT), transportation and centralization of different nickel-titanium (NiTi) rotary instruments. One hundred and twenty eight mandibular premolars were selected and instrumented using the following brands of NiTi files: WaveOne, WaveOne Gold, Reciproc, ProTaper Next, ProTaper Gold, Mtwo, BioRaCe and RaCe. CBCT imaging was performed before and after root canal preparation to obtain measurements of mesial and distal dentin walls and calculations of root canal transportation and centralization. A normal distribution of data was confirmed by the Kolmogorov-Smirnov and Levene tests, and results were assessed using the Kruskal-Wallis test. Statistical significance was set at 5%. ProTaper Gold produced the lowest canal transportation values, and RaCe, the highest. ProTaper Gold files also showed the highest values for centering ability, whereas BioRaCe showed the lowest. No significant differences were found across the different instruments in terms of canal transportation and centering ability (P > 0.05). Based on the methodology employed, all instruments used for root canal preparation of mandibular premolars performed similarly with regard to canal transportation and centering ability.

Mixed-Media File Systems

NARCIS (Netherlands)

Bosch, H.G.P.

1999-01-01

This thesis addresses the problem of implementing mixed-media storage systems. In this work a mixed-media file system is defined to be a system that stores both conventional (best-effort) file data and real-time continuous-media data. Continuous-media data is usually bulky, and servers storing and

76 FR 58257 - Combined Notice of Filings #2

Science.gov (United States)

2011-09-20

... Hills Wind Farm, LLC MBR Tariff to be effective 10/31/2007. Filed Date: 09/12/2011. Accession Number... filing per 35.1: Smoky Hills Wind Project II, LLC MBR Tariff to be effective 10/20/2008. Filed Date: 09..., LLC submits tariff filing per 35.1: Enel Stillwater, LLC MBR Tariff to be effective 12/5/2008. Filed...

77 FR 28592 - Combined Notice of Filings #1

Science.gov (United States)

2012-05-15

...: Middletown MBR Application to be effective 5/8/2012. Filed Date: 5/7/12. Accession Number: 20120507-5128..., LLC. Description: Southern Energy Initial MBR Filing to be effective 5/ 7/2012. Filed Date: 5/8/12... Company submits tariff filing per 35.37: MBR Triennial Filing--1st Rev MBR to be effective 9/30/2010...

76 FR 59676 - Combined Notice of Filings #1

Science.gov (United States)

2011-09-27

... MBR Tariff to be effective 10/1/2011. Filed Date: 09/16/2011. Accession Number: 20110916-5146. Comment... 35.1: ONEOK Energy Services Company Baseline MBR Filing to be effective 9/16/2011. Filed Date: 09/16... Services Order No. 697 Compliance Filing of MBR Tariff to be effective 9/16/2011. Filed Date: 09/16/2011...

K-file vs ProFiles in cleaning capacity and instrumentation time in primary molar root canals: An in vitro study

Directory of Open Access Journals (Sweden)

N Madan

2011-01-01

Full Text Available Objectives: This study compares the efficiency of manual K-files and rotary ProFiles in cleaning capacity and instrumentation time in primary molar root canals. Materials and Methods: Seventy-five maxillary and mandibular primary molar root canals were instrumented with ProFiles and K-files in the step-back manner from size #10 to #40. The teeth were decalcified, dehydrated and cleared, and analyzed for the presence of dye remaining on the root canal walls, which served as an evidence of cleaning capacity of both the techniques. Results: The results showed a significant difference in the cleaning capacity of the root canals with ProFiles and K-files, in apical and coronal thirds of the root canal. ProFiles have been found to be more efficient in cleaning the coronal thirds and K-files in cleaning apical thirds of the root canals. Both the techniques were almost equally effective in cleaning the middle thirds of the canals. The time taken during the cleaning of the root canals appeared to be statistically shorter with K-files than profiles.

SPSS and SAS programs for addressing interdependence and basic levels-of-analysis issues in psychological data.

Science.gov (United States)

O'Connor, Brian P

2004-02-01

Levels-of-analysis issues arise whenever individual-level data are collected from more than one person from the same dyad, family, classroom, work group, or other interaction unit. Interdependence in data from individuals in the same interaction units also violates the independence-of-observations assumption that underlies commonly used statistical tests. This article describes the data analysis challenges that are presented by these issues and presents SPSS and SAS programs for conducting appropriate analyses. The programs conduct the within-and-between-analyses described by Dansereau, Alutto, and Yammarino (1984) and the dyad-level analyses described by Gonzalez and Griffin (1999) and Griffin and Gonzalez (1995). Contrasts with general multilevel modeling procedures are then discussed.

Particle Tracking Model and Abstraction of Transport Processes

International Nuclear Information System (INIS)

Robinson, B.

2000-01-01

The purpose of the transport methodology and component analysis is to provide the numerical methods for simulating radionuclide transport and model setup for transport in the unsaturated zone (UZ) site-scale model. The particle-tracking method of simulating radionuclide transport is incorporated into the FEHM computer code and the resulting changes in the FEHM code are to be submitted to the software configuration management system. This Analysis and Model Report (AMR) outlines the assumptions, design, and testing of a model for calculating radionuclide transport in the unsaturated zone at Yucca Mountain. In addition, methods for determining colloid-facilitated transport parameters are outlined for use in the Total System Performance Assessment (TSPA) analyses. Concurrently, process-level flow model calculations are being carrier out in a PMR for the unsaturated zone. The computer code TOUGH2 is being used to generate three-dimensional, dual-permeability flow fields, that are supplied to the Performance Assessment group for subsequent transport simulations. These flow fields are converted to input files compatible with the FEHM code, which for this application simulates radionuclide transport using the particle-tracking algorithm outlined in this AMR. Therefore, this AMR establishes the numerical method and demonstrates the use of the model, but the specific breakthrough curves presented do not necessarily represent the behavior of the Yucca Mountain unsaturated zone

EPHT air quality (county PM2.5 and Ozone) indicators, 2001-2006

Data.gov (United States)

California Environmental Health Tracking Program — The EPHT air quality indicator files are from a SAS program which calculates the air indicators as developed by CDC's Environmental Public Health Tracking (EPHT) Air...

Curved canals: Ancestral files revisited

Directory of Open Access Journals (Sweden)

Jain Nidhi

2008-01-01

Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.

76 FR 40905 - Turnagain Arm Tidal Electric Energy Project; Notice of Intent To File License Application, Filing...

Science.gov (United States)

2011-07-12

... Tidal Electric Energy Project; Notice of Intent To File License Application, Filing of Pre-Application....: 13509-001. c. Dated Filed: May 11, 2011. d. Submitted By: Turnagain Arm Tidal Energy Corporation. e. Name of Project: Turnagain Arm Tidal Electric Energy Project. f. Location: Of the Upper Cook Inlet off...

77 FR 58370 - Pennamaquan Tidal Power LLC; Notice of Intent To File License Application, Filing of Pre...

Science.gov (United States)

2012-09-20

... Tidal Power LLC; Notice of Intent To File License Application, Filing of Pre-Application Document (PAD... Filed: July 19, 2012. d. Submitted By: Pennamaquan Tidal Power LLC (Pennamaquan Power). e. Name of Project: Pennamaquan Tidal Power Plant Project. f. Location: On the Pennamaquan River at the entrance to...

75 FR 61474 - Juneau Hydropower, Inc.; Notice of Intent To File License Application, Filing of Pre-Application...

Science.gov (United States)

2010-10-05

... Hydropower, Inc.; Notice of Intent To File License Application, Filing of Pre-Application Document, and....: 13563-001. c. Dated Filed: July 28, 2010. d. Submitted By: Juneau Hydropower, Inc. e. Name of Project... Commission's regulations. h. Potential Applicant Contact: Duff W. Mitchell, Juneau Hydropower, Inc., P.O. Box...

Evaluated nuclear-data file for niobium

International Nuclear Information System (INIS)

Smith, A.B.; Smith, D.L.; Howerton, R.J.

1985-03-01

A comprehensive evaluated nuclear-data file for elemental niobium is provided in the ENDF/B format. This file, extending over the energy range 10 -11 -20 MeV, is suitable for comprehensive neutronic calculations, particulary those dealing with fusion-energy systems. It also provides dosimetry information. Attention is given to the internal consistancy of the file, energy balance, and the quantitative specification of uncertainties. Comparisons are made with experimental data and previous evaluated files. The results of integral tests are described and remaining outstanding problem areas are cited. 107 refs

Data_files_Reyes_EHP_phthalates

Data.gov (United States)

U.S. Environmental Protection Agency — The file contains three files in comma separated values (.csv) format. “Reyes_EHP_Phthalates_US_metabolites.csv” contains information about the National Health and...

75 FR 51994 - Combined Notice of Filings

Science.gov (United States)

2010-08-24

...: Panther Interstate Pipeline Energy, LLC. Description: Panther Interstate Pipeline Energy, LLC submits tariff filing per 154.203: Panther Baseline eTariff Filing to be effective 8/ 12/2010. Filed Date: 08/13...

75 FR 49923 - Combined Notice of Filings #1

Science.gov (United States)

2010-08-16

... filing per 35.12: KCP&L-GMO Baseline Filing (Market-Based Volume 28) to be effective 8/2/2010. Filed Date...: KCP&L Greater Missouri Operations Company submits tariff filing per 35.12: GMO Volume 33 (Cost-Based...

An analysis of the number of parking bays and checkout counters for a supermarket using SAS simulation studio

Science.gov (United States)

Kar, Leow Soo

2014-07-01

Two important factors that influence customer satisfaction in large supermarkets or hypermarkets are adequate parking facilities and short waiting times at the checkout counters. This paper describes the simulation analysis of a large supermarket to determine the optimal levels of these two factors. SAS Simulation Studio is used to model a large supermarket in a shopping mall with car park facility. In order to make the simulation model more realistic, a number of complexities are introduced into the model. For example, arrival patterns of customers vary with the time of the day (morning, afternoon and evening) and with the day of the week (weekdays or weekends), the transport mode of arriving customers (by car or other means), the mode of payment (cash or credit card), customer shopping pattern (leisurely, normal, exact) or choice of checkout counters (normal or express). In this study, we focus on 2 important components of the simulation model, namely the parking area, the normal and express checkout counters. The parking area is modeled using a Resource Pool block where one resource unit represents one parking bay. A customer arriving by car seizes a unit of the resource from the Pool block (parks car) and only releases it when he exits the system. Cars arriving when the Resource Pool is empty (no more parking bays) leave without entering the system. The normal and express checkouts are represented by Server blocks with appropriate service time distributions. As a case study, a supermarket in a shopping mall with a limited number of parking bays in Bangsar was chosen for this research. Empirical data on arrival patterns, arrival modes, payment modes, shopping patterns, service times of the checkout counters were collected and analyzed to validate the model. Sensitivity analysis was also performed with different simulation scenarios to identify the parameters for the optimal number the parking spaces and checkout counters.

biological relevance of reductions of testosterone production on the adverse effects of in utero phthalate combinations

Data.gov (United States)

U.S. Environmental Protection Agency — RAW DATA, SAS FILES AND DATA MEANS. This dataset is associated with the following publication: Howdeshell, K., C. Rider, V. Wilson , J. Furr , C. Lambright , and E....

Radiology Teaching Files on the Internet

International Nuclear Information System (INIS)

Lim, Eun Chung; Kim, Eun Kyung

1996-01-01

There is increasing attention about radiology teaching files on the Internet in the field of diagnostic radiology. The purpose of this study was to aid in the creation of new radiology teaching file by analysing the present radiology teaching file sites on the Internet with many aspects and evaluating images on those sites, using Macintosh II ci compute r, 28.8kbps TelePort Fax/Modem, Netscape Navigator 2.0 software. The results were as follow : 1. Analysis of radiology teaching file sites (1) Country distribution was the highest in USA (57.5%). (2) Average number of cases was 186 cases and radiology teaching file sites with search engine were 9 sites (22.5%). (3) At the method of case arrangement, anatomic area type and diagnosis type were found at the 10 sites (25%) each, question and answer type was found at the 9 sites (22.5%). (4) Radiology teaching file sites with oro-maxillofacial disorder were 9 sites (22.5%). (5) At the image format, GIF format was found at the 14 sites (35%), and JPEG format found at the 14 sites (35%). (6) Created year was the highest in 1995 (43.7%). (7) Continuing case upload was found at the 35 sites (87.5%). 2. Evaluation of images on the radiology teaching files (1) Average file size of GIF format (71 Kbyte) was greater than that of JPEG format (24 Kbyte). (P<0.001) (2) Image quality of GIF format was better than that of JPEG format. (P<0.001)

Detection Of Alterations In Audio Files Using Spectrograph Analysis

Directory of Open Access Journals (Sweden)

Anandha Krishnan G

2015-08-01

Full Text Available The corresponding study was carried out to detect changes in audio file using spectrograph. An audio file format is a file format for storing digital audio data on a computer system. A sound spectrograph is a laboratory instrument that displays a graphical representation of the strengths of the various component frequencies of a sound as time passes. The objectives of the study were to find the changes in spectrograph of audio after altering them to compare altering changes with spectrograph of original files and to check for similarity and difference in mp3 and wav. Five different alterations were carried out on each audio file to analyze the differences between the original and the altered file. For altering the audio file MP3 or WAV by cutcopy the file was opened in Audacity. A different audio was then pasted to the audio file. This new file was analyzed to view the differences. By adjusting the necessary parameters the noise was reduced. The differences between the new file and the original file were analyzed. By adjusting the parameters from the dialog box the necessary changes were made. The edited audio file was opened in the software named spek where after analyzing a graph is obtained of that particular file which is saved for further analysis. The original audio graph received was combined with the edited audio file graph to see the alterations.

The nucleobase cation symporter 1 of Chlamydomonas reinhardtii and that of the evolutionarily distant Arabidopsis thaliana display parallel function and establish a plant-specific solute transport profile.

Science.gov (United States)

Schein, Jessica R; Hunt, Kevin A; Minton, Janet A; Schultes, Neil P; Mourad, George S

2013-09-01

The single cell alga Chlamydomonas reinhardtii is capable of importing purines as nitrogen sources. An analysis of the annotated C. reinhardtii genome reveals at least three distinct gene families encoding for known nucleobase transporters. In this study the solute transport and binding properties for the lone C. reinhardtii nucleobase cation symporter 1 (CrNCS1) are determined through heterologous expression in Saccharomyces cerevisiae. CrNCS1 acts as a transporter of adenine, guanine, uracil and allantoin, sharing similar - but not identical - solute recognition specificity with the evolutionary distant NCS1 from Arabidopsis thaliana. The results suggest that the solute specificity for plant NCS1 occurred early in plant evolution and are distinct from solute transport specificities of single cell fungal NCS1 proteins. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

US Department of Energy transportation programs: computerized techniques

International Nuclear Information System (INIS)

Joy, D.S.; Johnson, P.E.; Fore, C.S.; Peterson, B.E.

1984-01-01

The US Department of Energy is currently sponsoring the development of four specialized computer-based transportation programs at Oak Ridge National Laboratory. The programs function as research tools that provide unique computerized techniques for planning the safe shipment of radioactive and hazardous materials. Major achievements include the development of interactive rail and highway routing models, an emergency response assistance program, a data base focusing on legislative requirements, and a resource file identifying key state and local contacts. A discussion of the programs and data bases is presented, and several examples reflecting each project's applications to the overall DOE transportation program are provided. The interface of these programs offers a dynamic resource of data for use during preshipment planning stages. 10 refs., 4 figs., 2 tabs

Real frequency of ordinary and atypical sub-trochanteric and diaphyseal fractures in France based on X-rays and medical file analysis.

Science.gov (United States)

Beaudouin-Bazire, Constance; Dalmas, Noémie; Bourgeois, Julie; Babinet, Antoine; Anract, Philippe; Chantelot, Christophe; Farizon, Frédéric; Chopin, Florence; Briot, Karine; Roux, Christian; Cortet, Bernard; Thomas, Thierry

2013-03-01

Atypical sub-trochanteric and femoral shaft fractures have been reported in patients treated with bisphosphonates. Their incidence has been determined from registered data analysis using international codes. Therefore, the aim of our study was to estimate the real frequency of typical and atypical sub-trochanteric or diaphyseal fractures, based on radiological and clinical data compared to registered data. In the registers of three large French University Hospitals, patients identified with International Classification of Diseases, 10th Revision diagnosis codes for sub-trochanteric or diaphyseal fracture were selected. Frequencies of ordinary and atypical fractures were calculated after both registered data, radiological and clinical files analysis. Among the 4592 patients hospitalized for a femoral fracture over 5 years, 574 were identified to have had a sub-trochanteric or femoral shaft fracture. 47.7% of the sub-trochanteric and femoral shaft fractures were misclassified, predominantly in the sub-trochanteric fractures subset. 12 patients had an atypical fracture (4% of the sub-trochanteric and femoral shaft fractures) and 11 fractures presented radiological features of atypical fractures, whereas clinical files analysis revealed they were pathological or traumatic fractures. Atypical fractures frequency is very low. Because of their low frequency and the unreliability of registered databases, the risk of atypical fractures is very difficult to estimate retrospectively. A prospective study is needed to clarify the risk factors associated with these fractures. Copyright © 2012 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

The crystallographic information file (CIF): A new standard archive file for crystallography

International Nuclear Information System (INIS)

Hall, S.R.; Allen, F.H.; Brown, I.D.

1991-01-01

The specification of a new standard Crystallographic Information File (CIF) is described. Its development is based on the Self-Defining Text Archieve and Retrieval (STAR) procedure. The CIF is a general, flexible and easily extensible free-format archive file; it is human and machine readable and can be edited by a simple editor. The CIF is designed for the electronic transmission of crystallographic data between individual laboratories, journals and databases: It has been adopted by the International Union of Crystallography as the recommended medium for this purpose. The file consists of data names and data items, together with a loop facility for repeated items. The data names, constructed hierarchically so as to form data categories, are self-descriptive within a 32-character limit. The sorted list of data names, together with their precise definitions, constitutes the CIF dictionary (core version 1991). The CIF core dictionary is presented in full and covers the fundamental and most commonly used data items relevant to crystal structure analysis. The dictionary is also available as an electronic file suitable for CIF computer applications. Future extensions to the dictionary will include data items used in more specialized areas of crystallography. (orig.)

Fast probabilistic file fingerprinting for big data.

Science.gov (United States)

Tretyakov, Konstantin; Laur, Sven; Smant, Geert; Vilo, Jaak; Prins, Pjotr

2013-01-01

Biological data acquisition is raising new challenges, both in data analysis and handling. Not only is it proving hard to analyze the data at the rate it is generated today, but simply reading and transferring data files can be prohibitively slow due to their size. This primarily concerns logistics within and between data centers, but is also important for workstation users in the analysis phase. Common usage patterns, such as comparing and transferring files, are proving computationally expensive and are tying down shared resources. We present an efficient method for calculating file uniqueness for large scientific data files, that takes less computational effort than existing techniques. This method, called Probabilistic Fast File Fingerprinting (PFFF), exploits the variation present in biological data and computes file fingerprints by sampling randomly from the file instead of reading it in full. Consequently, it has a flat performance characteristic, correlated with data variation rather than file size. We demonstrate that probabilistic fingerprinting can be as reliable as existing hashing techniques, with provably negligible risk of collisions. We measure the performance of the algorithm on a number of data storage and access technologies, identifying its strengths as well as limitations. Probabilistic fingerprinting may significantly reduce the use of computational resources when comparing very large files. Utilisation of probabilistic fingerprinting techniques can increase the speed of common file-related workflows, both in the data center and for workbench analysis. The implementation of the algorithm is available as an open-source tool named pfff, as a command-line tool as well as a C library. The tool can be downloaded from http://biit.cs.ut.ee/pfff.

77 FR 34030 - BOST1 Hydroelectric LLC; Notice of Intent To File License Application, Filing of Pre-Application...

Science.gov (United States)

2012-06-08

... Hydroelectric LLC; Notice of Intent To File License Application, Filing of Pre-Application Document, and.... Date Filed: March 21, 2012. d. Submitted By: BOST1 Hydroelectric LLC (BOST1). e. Name of Project: Coon Rapids Dam Hydroelectric Project. f. Location: Mississippi River in Hennepin and Anoka counties...

High-Performance, Multi-Node File Copies and Checksums for Clustered File Systems

Science.gov (United States)

Kolano, Paul Z.; Ciotti, Robert B.

2012-01-01

Modern parallel file systems achieve high performance using a variety of techniques, such as striping files across multiple disks to increase aggregate I/O bandwidth and spreading disks across multiple servers to increase aggregate interconnect bandwidth. To achieve peak performance from such systems, it is typically necessary to utilize multiple concurrent readers/writers from multiple systems to overcome various singlesystem limitations, such as number of processors and network bandwidth. The standard cp and md5sum tools of GNU coreutils found on every modern Unix/Linux system, however, utilize a single execution thread on a single CPU core of a single system, and hence cannot take full advantage of the increased performance of clustered file systems. Mcp and msum are drop-in replacements for the standard cp and md5sum programs that utilize multiple types of parallelism and other optimizations to achieve maximum copy and checksum performance on clustered file systems. Multi-threading is used to ensure that nodes are kept as busy as possible. Read/write parallelism allows individual operations of a single copy to be overlapped using asynchronous I/O. Multinode cooperation allows different nodes to take part in the same copy/checksum. Split-file processing allows multiple threads to operate concurrently on the same file. Finally, hash trees allow inherently serial checksums to be performed in parallel. Mcp and msum provide significant performance improvements over standard cp and md5sum using multiple types of parallelism and other optimizations. The total speed-ups from all improvements are significant. Mcp improves cp performance over 27x, msum improves md5sum performance almost 19x, and the combination of mcp and msum improves verified copies via cp and md5sum by almost 22x. These improvements come in the form of drop-in replacements for cp and md5sum, so are easily used and are available for download as open source software at http://mutil.sourceforge.net.

75 FR 68340 - Combined Notice of Filings # 1

Science.gov (United States)

2010-11-05

... Project, LP; Southern Company--Florida LLC. Description: Report of Non-Material Change in Estimated Coal... Energy Ohio, Inc. submits tariff filing per 35: Compliance Filing to be effective 7/29/2010. Filed Date..., Inc. Description: Midwest Independent Transmission System Operator, Inc. submits tariff filing per 35...

Microtomography-based comparison of reciprocating single-file F2 ProTaper technique versus rotary full sequence.

Science.gov (United States)

Paqué, Frank; Zehnder, Matthias; De-Deus, Gustavo

2011-10-01

A preparation technique with only 1 single instrument was proposed on the basis of the reciprocating movement of the F2 ProTaper instrument. The present study was designed to quantitatively assess canal preparation outcomes achieved by this technique. Twenty-five extracted human mandibular first molars with 2 separate mesial root canals were selected. Canals were randomly assigned to 1 of the 2 experimental groups: group 1, rotary conventional preparation by using ProTaper, and group 2, reciprocate instrumentation with 1 single ProTaper F2 instrument. Specimens were scanned initially and after root canal preparation with an isotropic resolution of 20 μm by using a micro-computed tomography system. The following parameters were assessed: changes in dentin volume, percentage of shaped canal walls, and degree of canal transportation. In addition, the time required to reach working length with the F2 instrument was recorded. Preoperatively, there were no differences regarding root canal curvature and volume between experimental groups. Overall, instrumentation led to enlarged canal shapes with no evidence of preparation errors. There were no statistical differences between the 2 preparation techniques in the anatomical parameters assessed (P > .01), except for a significantly higher canal transportation caused by the reciprocating file in the coronal canal third. On the other hand, preparation was faster by using the single-file technique (P ProTaper technique and conventional ProTaper full-sequence rotary approach were similar. However, the single-file F2 ProTaper technique was markedly faster in reaching working length. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

77 FR 105 - Combined Notice of Filings #2

Science.gov (United States)

2012-01-03

... tariff filing per 35.17(b): Effective Date Change for ``Fully Integrated'' DR Rules to be effective 6/1... Numbers: ER12-10-001. Applicants: Energy International Power Marketing. Description: Energy International Power Marketing submits tariff filing per 35: EIP Compliance Filing to be effective 10/3/2011. Filed...

Incidence of Apical Crack Initiation during Canal Preparation using Hand Stainless Steel (K-File) and Hand NiTi (Protaper) Files.

Science.gov (United States)

Soni, Dileep; Raisingani, Deepak; Mathur, Rachit; Madan, Nidha; Visnoi, Suchita

2016-01-01

To evaluate the incidence of apical crack initiation during canal preparation with stainless steel K-files and hand protaper files (in vitro study). Sixty extracted mandibular premo-lar teeth are randomly selected and embedded in an acrylic tube filled with autopolymerizing resin. A baseline image of the apical surface of each specimen was recorded under a digital microscope (80×). The cervical and middle thirds of all samples were flared with #2 and #1 Gates-Glidden (GG) drills, and a second image was recorded. The teeth were randomly divided into four groups of 15 teeth each according to the file type (hand K-file and hand-protaper) and working length (WL) (instrumented at WL and 1 mm less than WL). Final image after dye penetration and photomicrograph of the apical root surface were digitally recorded. Maximum numbers of cracks were observed with hand protaper files compared with hand K-file at the WL and 1 mm short of WL. Chi-square testing revealed a highly significant effect of WL on crack formation at WL and 1 mm short of WL (p = 0.000). Minimum numbers of cracks at WL and 1 mm short of WL were observed with hand K-file and maximum with hand protaper files. Soni D, Raisingani D, Mathur R, Madan N, Visnoi S. Incidence of Apical Crack Initiation during Canal Preparation using Hand Stainless Steel (K-File) and Hand NiTi (Protaper) Files. Int J Clin Pediatr Dent 2016;9(4):303-307.

CHEETAH: circuit-switched high-speed end-to-end transport architecture

Science.gov (United States)

Veeraraghavan, Malathi; Zheng, Xuan; Lee, Hyuk; Gardner, M.; Feng, Wuchun

2003-10-01

Leveraging the dominance of Ethernet in LANs and SONET/SDH in MANs and WANs, we propose a service called CHEETAH (Circuit-switched High-speed End-to-End Transport ArcHitecture). The service concept is to provide end hosts with high-speed, end-to-end circuit connectivity on a call-by-call shared basis, where a "circuit" consists of Ethernet segments at the ends that are mapped into Ethernet-over-SONET long-distance circuits. This paper focuses on the file-transfer application for such circuits. For this application, the CHEETAH service is proposed as an add-on to the primary Internet access service already in place for enterprise hosts. This allows an end host that is sending a file to first attempt setting up an end-to-end Ethernet/EoS circuit, and if rejected, fall back to the TCP/IP path. If the circuit setup is successful, the end host will enjoy a much shorter file-transfer delay than on the TCP/IP path. To determine the conditions under which an end host with access to the CHEETAH service should attempt circuit setup, we analyze mean file-transfer delays as a function of call blocking probability in the circuit-switched network, probability of packet loss in the IP network, round-trip times, link rates, and so on.

Design and application of remote file management system

International Nuclear Information System (INIS)

Zhu Haijun; Liu Dekang; Shen liren

2006-01-01

File transfer protocol can help users transfer files between computers on internet. FTP can not fulfill the needs of users in special occasions, so it needs programmer define file transfer protocol himself based on users. The method or realization and application for user-defined file transfer protocol is introduced. (authors)

37 CFR 360.21 - Time of filing.

Science.gov (United States)

2010-07-01

... OF ROYALTY CLAIMS FILING OF CLAIMS TO ROYALTY FEES COLLECTED UNDER COMPULSORY LICENSE Digital Audio... purposes of royalties filing and fee distribution. Such written authorization, however, will not be... members or affiliates before the Copyright Royalty Board in royalty filing and fee distribution...

Computational procedures for probing interactions in OLS and logistic regression: SPSS and SAS implementations.

Science.gov (United States)

Hayes, Andrew F; Matthes, Jörg

2009-08-01

Researchers often hypothesize moderated effects, in which the effect of an independent variable on an outcome variable depends on the value of a moderator variable. Such an effect reveals itself statistically as an interaction between the independent and moderator variables in a model of the outcome variable. When an interaction is found, it is important to probe the interaction, for theories and hypotheses often predict not just interaction but a specific pattern of effects of the focal independent variable as a function of the moderator. This article describes the familiar pick-a-point approach and the much less familiar Johnson-Neyman technique for probing interactions in linear models and introduces macros for SPSS and SAS to simplify the computations and facilitate the probing of interactions in ordinary least squares and logistic regression. A script version of the SPSS macro is also available for users who prefer a point-and-click user interface rather than command syntax.

GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

Directory of Open Access Journals (Sweden)

R. Bera

2015-05-01

Full Text Available To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI GéoSAS which is the SDI set up for researchers’ needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

Science.gov (United States)

Bera, R.; Squividant, H.; Le Henaff, G.; Pichelin, P.; Ruiz, L.; Launay, J.; Vanhouteghem, J.; Aurousseau, P.; Cudennec, C.

2015-05-01

To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences) make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI) GéoSAS which is the SDI set up for researchers' needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

X-Files opjat v stroju

Index Scriptorium Estoniae

2008-01-01

USA sarjale "The X-Files" põhinev teine järjefilm "Salatoimikud: Ma tahan uskuda" ("The X-Files: I Want to Believe") : režissöör Chris Carter : peaosades David Duchovny, Gillian Anderson : Ameerika Ühendriigid - Kanada 2008

Planteamiento estratégico de Pronalfo S.A.S. y Reingeniería del Proceso de Producción

OpenAIRE

Fajardo Castillo, Erika Esperanza; Quiroga Arguello, Luz Andrea

2012-01-01

Pronalfo S.A.S es una empresa dedicada a la elaboración de núcleos balanceados como materia prima para la alimentación animal, fue creada hace 7 años y se encuentra en la etapa de crecimiento y posicionamiento en el mercado. Es necesario establecer el planeamiento estratégico mediante la definición de misión, visión, objetivos y estrategias, para tener clara su razón de ser y proyectándose al futuro estableciendo una ventaja competitiva mediante estrategias que le permitan mantenerse en ...

Desarrollo de las competencias en los altos ejecutivos y mandos medios de estrella petrolera de Colombia S.A.S.

OpenAIRE

Díaz Hurtado, David Hernando; Villamarín Rincón, Bibiana

2012-01-01

La situación actual de la compañía Estrella Petrolera de Colombia S.A.S, está demandando un replanteamiento en el manejo su departamento de Recursos Humanos. Como parte de la estrategia de la compañía para afrontar los retos del negocio se desea adoptar el proceso de Gestión Humana basada en competencias el cual brindará la orientación necesaria para el desarrollo del conocimiento y el aprendizaje permanente. Los métodos de gestión de Recursos Humanos basados en competencias facilita...

29 CFR 1979.103 - Filing of discrimination complaint.

Science.gov (United States)

2010-07-01

... subcontractor of an air carrier in violation of the Act may file, or have filed by any person on the employee's... acts and omissions, with pertinent dates, which are believed to constitute the violations. (c) Place of filing. The complaint should be filed with the OSHA Area Director responsible for enforcement activities...

76 FR 6125 - Combined Notice of Filings #1

Science.gov (United States)

2011-02-03

... filing per 35: Arthur Kill--Amendment to MBR Tariff 01262011 to be effective 10/8/ 2010. Filed Date: 01... Turbine Power LLC submits tariff filing per 35: Astoria--Amendment to MBR Tariff 01/26/2011 to be... Description: Conemaugh Power LLC submits tariff filing per 35: Conemaugh--Amendment to MBR Tariff 01262011 to...

77 FR 43820 - Combined Notice of Filings #1

Science.gov (United States)

2012-07-26

.... Docket Numbers: ER12-1946-001. Applicants: Duke Energy Beckjord, LLC. Description: Amendment to MBR...: Amendment to MBR Tariff Filing to be effective 10/1/ 2012. Filed Date: 7/18/12. Accession Number: 20120718... Creek, LLC. Description: Amendment to MBR Tariff Filing to be effective 10/1/ 2012. Filed Date: 7/18/12...

77 FR 60418 - Combined Notice of Filings

Science.gov (United States)

2012-10-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice that the Commission has received the following Natural Gas Pipeline Rate and Refund Report filings...-1064-000. Applicants: Venice Gathering System, L.L.C. Description: NAESB 2.0 Compliance Filing to be...

An exploratory discussion on business files compilation

International Nuclear Information System (INIS)

Gao Chunying

2014-01-01

Business files compilation for an enterprise is a distillation and recreation of its spiritual wealth, from which the applicable information can be available to those who want to use it in a fast, extensive and precise way. Proceeding from the effects of business files compilation on scientific researches, productive constructions and developments, this paper in five points discusses the way how to define topics, analyze historical materials, search or select data and process it to an enterprise archives collection. Firstly, to expound the importance and necessity of business files compilation in production, operation and development of an company; secondly, to present processing methods from topic definition, material searching and data selection to final examination and correction; thirdly, to define principle and classification in order to make different categories and levels of processing methods available to business files compilation; fourthly, to discuss the specific method how to implement a file compilation through a documentation collection upon principle of topic definition gearing with demand; fifthly, to address application of information technology to business files compilation in view point of widely needs for business files so as to level up enterprise archives management. The present discussion focuses on the examination and correction principle of enterprise historical material compilation and the basic classifications as well as the major forms of business files compilation achievements. (author)

75 FR 62371 - Combined Notice of Filings #2

Science.gov (United States)

2010-10-08

.... Description: Weyerhaeuser NR Company submits tariff filing per 35.12: Weyerhaeuser NR Company MBR Tariff to be..., Inc. MBR eTariff Filing to be effective 9/30/2010. Filed Date: 09/30/2010. Accession Number: 20100930... 35.12: Chandler Wind Partners, LLC MBR Tariff to be effective 9/30/ 2010. Filed Date: 09/30/2010...

Collective operations in a file system based execution model

Science.gov (United States)

Shinde, Pravin; Van Hensbergen, Eric

2013-02-19

A mechanism is provided for group communications using a MULTI-PIPE synthetic file system. A master application creates a multi-pipe synthetic file in the MULTI-PIPE synthetic file system, the master application indicating a multi-pipe operation to be performed. The master application then writes a header-control block of the multi-pipe synthetic file specifying at least one of a multi-pipe synthetic file system name, a message type, a message size, a specific destination, or a specification of the multi-pipe operation. Any other application participating in the group communications then opens the same multi-pipe synthetic file. A MULTI-PIPE file system module then implements the multi-pipe operation as identified by the master application. The master application and the other applications then either read or write operation messages to the multi-pipe synthetic file and the MULTI-PIPE synthetic file system module performs appropriate actions.

Search the SEC website for the latest EDGAR filings

Data.gov (United States)

Securities and Exchange Commission — This listing contains the most recent filings for the current official filing date (including filings made after the 5:30pm deadline on the previous filing day)....

77 FR 27221 - Combined Notice of Filings

Science.gov (United States)

2012-05-09

... Generator Status of Minonk Wind, LLC. Filed Date: 4/19/12. Accession Number: 20120419-5196. Comments Due: 5... Self-Certification of Exempt Wholesale Generator Status of Senate Wind, LLC. Filed Date: 4/19/12... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings Take notice...

21 CFR 720.2 - Times for filing.

Science.gov (United States)

2010-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.2 Times for filing. Within 180 days after forms are made available to the industry, Form FDA 2512 should be filed for each cosmetic...

75 FR 51451 - Erie Boulevard Hydropower, L.P.; Notice of Intent To File License Application, Filing of Pre...

Science.gov (United States)

2010-08-20

... Hydropower, L.P.; Notice of Intent To File License Application, Filing of Pre-Application Document, and.... Project No.: 7320-040. c. Dated Filed: June 29, 2010. d. Submitted By: Erie Boulevard Hydropower, L.P. e...: John Mudre at (202) 502-8902; or e-mail at [email protected] . j. Erie Boulevard Hydropower, L.P...

Flexibility and Performance of Parallel File Systems

Science.gov (United States)

Kotz, David; Nieuwejaar, Nils

1996-01-01

As we gain experience with parallel file systems, it becomes increasingly clear that a single solution does not suit all applications. For example, it appears to be impossible to find a single appropriate interface, caching policy, file structure, or disk-management strategy. Furthermore, the proliferation of file-system interfaces and abstractions make applications difficult to port. We propose that the traditional functionality of parallel file systems be separated into two components: a fixed core that is standard on all platforms, encapsulating only primitive abstractions and interfaces, and a set of high-level libraries to provide a variety of abstractions and application-programmer interfaces (API's). We present our current and next-generation file systems as examples of this structure. Their features, such as a three-dimensional file structure, strided read and write interfaces, and I/O-node programs, are specifically designed with the flexibility and performance necessary to support a wide range of applications.

Evaluated nuclear data file of Th-232

International Nuclear Information System (INIS)

Meadows, J.; Poenitz, W.; Smith, A.; Smith, D.; Whalen, J.; Howerton, R.

1977-09-01

An evaluated nuclear data file for thorium is described. The file extends over the energy range 0.049 (i.e., the inelastic-scattering threshold) to 20.0 MeV and is formulated within the framework of the ENDF system. The input data base, the evaluation procedures and judgments, and ancillary experiments carried out in conjunction with the evaluation are outlined. The file includes: neutron total cross sections, neutron scattering processes, neutron radiative capture cross sections, fission cross sections, (n;2n) and (n;3n) processes, fission properties (e.g., nu-bar and delayed neutron emission) and photon production processes. Regions of uncertainty are pointed out particularly where new measured results would be of value. The file is extended to thermal energies using previously reported resonance evaluations thereby providing a complete file for neutronic calculations. Integral data tests indicated that the file was suitable for neutronic calculations in the MeV range

78 FR 20901 - Combined Notice of Filings #1

Science.gov (United States)

2013-04-08

... Marketing Inc. submits Category Seller Clarification to be effective 3/29/2013. Filed Date: 3/29/13... submits Cost- Based Tariffs Compliance Filing to be effective 4/1/2013. Filed Date: 3/29/13. Accession... to be effective N/A. Filed Date: 3/29/13. Accession Number: 20130329-5223. Comments Due: 5 p.m. ET 4...

29 CFR 24.103 - Filing of retaliation complaint.

Science.gov (United States)

2010-07-01

... violations. (c) Place of Filing. The complaint should be filed with the OSHA Area Director responsible for... by an employer in violation of any of the statutes listed in § 24.100(a) may file, or have filed by... with any OSHA officer or employee. Addresses and telephone numbers for these officials are set forth in...

76 FR 16404 - Combined Notice of Filings #1

Science.gov (United States)

2011-03-23

...: Amendment to MBR Tariff to be effective 5/13/2011. Filed Date: 03/14/2011. Accession Number: 20110314-5272... tariff filing per 35: Amendment to MBR Tariff to be effective 5/13/ 2011. Filed Date: 03/14/2011.... Subsidiary No. 2, Inc. submits tariff filing per 35: Amendment to MBR Tariff to be effective 5/13/ 2011...

77 FR 33206 - Combined Notice of Filings #2

Science.gov (United States)

2012-06-05

... tariff filing per 35: High Trail Wind Farm First Revised MBR to be effective 5/26/2012. Filed Date: 5/25... per 35: Old Trail Wind Farm First Revised MBR to be effective 5/26/2012. Filed Date: 5/25/12... First Revised MBR to be effective 6/1/2012. Filed Date: 5/25/12. Accession Number: 20120525-5088...

77 FR 56270 - CSX Transportation, Inc.-Temporary Trackage Rights Exemption-Alabama Great Southern Railroad...

Science.gov (United States)

2012-09-12

....C. 91 (1979). Because of the nature of the situation, CSXT reports that the unions representing... copies of all pleadings, referring to Docket No. FD 35674, must be filed with the Surface Transportation Board, 395 E Street, SW., Washington, DC 20423-0001. In addition, a copy of each pleading must be served...

DEFORM-4: fuel pin characterization and transient response in the SAS4A accident analysis code system

International Nuclear Information System (INIS)

Miles, K.J.; Hill, D.J.

1986-01-01

The DEFORM-4 module is the segment of the SAS4A Accident Analysis Code System that calculates the fuel pin characterization in response to a steady state irradiation history, thereby providing the initial conditions for the transient calculation. The various phenomena considered include fuel porosity migration, fission gas bubble induced swelling, fuel cracking and healing, fission gas release, cladding swelling, and the thermal-mechanical state of the fuel and cladding. In the transient state, the module continues the thermal-mechanical response calculation, including fuel melting and central cavity pressurization, until cladding failure is predicted and one of the failed fuel modules is initiated. Comparisons with experimental data have demonstrated the validity of the modeling approach

Index files for Belle II - very small skim containers

Science.gov (United States)

Sevior, Martin; Bloomfield, Tristan; Kuhr, Thomas; Ueda, I.; Miyake, H.; Hara, T.

2017-10-01

The Belle II experiment[1] employs the root file format[2] for recording data and is investigating the use of “index-files” to reduce the size of data skims. These files contain pointers to the location of interesting events within the total Belle II data set and reduce the size of data skims by 2 orders of magnitude. We implement this scheme on the Belle II grid by recording the parent file metadata and the event location within the parent file. While the scheme works, it is substantially slower than a normal sequential read of standard skim files using default root file parameters. We investigate the performance of the scheme by adjusting the “splitLevel” and “autoflushsize” parameters of the root files in the parent data files.

77 FR 23474 - Combined Notice of Filings

Science.gov (United States)

2012-04-19

...: Young Gas Storage Company, Ltd. Description: EBB Notice Categories to be effective 5/15/2012. Filed Date... intervention is necessary to become a party to the proceeding. Filings in Existing Proceedings Docket Numbers... requirements, interventions, protests, and service can be found at: http://www.ferc.gov/docs-filing/efiling...

DMFS: A Data Migration File System for NetBSD

Science.gov (United States)

Studenmund, William

2000-01-01

I have recently developed DMFS, a Data Migration File System, for NetBSD. This file system provides kernel support for the data migration system being developed by my research group at NASA/Ames. The file system utilizes an underlying file store to provide the file backing, and coordinates user and system access to the files. It stores its internal metadata in a flat file, which resides on a separate file system. This paper will first describe our data migration system to provide a context for DMFS, then it will describe DMFS. It also will describe the changes to NetBSD needed to make DMFS work. Then it will give an overview of the file archival and restoration procedures, and describe how some typical user actions are modified by DMFS. Lastly, the paper will present simple performance measurements which indicate that there is little performance loss due to the use of the DMFS layer.

Design and Implementation of a Metadata-rich File System

Energy Technology Data Exchange (ETDEWEB)

Ames, S; Gokhale, M B; Maltzahn, C

2010-01-19

Despite continual improvements in the performance and reliability of large scale file systems, the management of user-defined file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and semantic metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, user-defined attributes, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS incorporates Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the de facto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

831 Files

Data.gov (United States)

Social Security Administration — SSA-831 file is a collection of initial and reconsideration adjudicative level DDS disability determinations. (A few hearing level cases are also present, but the...