WorldWideScience

Sample records for sas proc mixed

  1. Using SAS PROC MCMC for Item Response Theory Models

    Science.gov (United States)

    Ames, Allison J.; Samonte, Kelli

    2015-01-01

    Interest in using Bayesian methods for estimating item response theory models has grown at a remarkable rate in recent years. This attentiveness to Bayesian estimation has also inspired a growth in available software such as WinBUGS, R packages, BMIRT, MPLUS, and SAS PROC MCMC. This article intends to provide an accessible overview of Bayesian…

  2. The Evaluation of Bivariate Mixed Models in Meta-analyses of Diagnostic Accuracy Studies with SAS, Stata and R.

    Science.gov (United States)

    Vogelgesang, Felicitas; Schlattmann, Peter; Dewey, Marc

    2018-05-01

    Meta-analyses require a thoroughly planned procedure to obtain unbiased overall estimates. From a statistical point of view not only model selection but also model implementation in the software affects the results. The present simulation study investigates the accuracy of different implementations of general and generalized bivariate mixed models in SAS (using proc mixed, proc glimmix and proc nlmixed), Stata (using gllamm, xtmelogit and midas) and R (using reitsma from package mada and glmer from package lme4). Both models incorporate the relationship between sensitivity and specificity - the two outcomes of interest in meta-analyses of diagnostic accuracy studies - utilizing random effects. Model performance is compared in nine meta-analytic scenarios reflecting the combination of three sizes for meta-analyses (89, 30 and 10 studies) with three pairs of sensitivity/specificity values (97%/87%; 85%/75%; 90%/93%). The evaluation of accuracy in terms of bias, standard error and mean squared error reveals that all implementations of the generalized bivariate model calculate sensitivity and specificity estimates with deviations less than two percentage points. proc mixed which together with reitsma implements the general bivariate mixed model proposed by Reitsma rather shows convergence problems. The random effect parameters are in general underestimated. This study shows that flexibility and simplicity of model specification together with convergence robustness should influence implementation recommendations, as the accuracy in terms of bias was acceptable in all implementations using the generalized approach. Schattauer GmbH.

  3. Sas2

    International Development Research Centre (IDRC) Digital Library (Canada)

    The fascinating multi-country examples in the Guide illustrate how SAS2 ... The challenge is to raise all forms of inquiry to the power of two: making the .... This requires an ability to suspend judgment, consider the views of others, ..... Our view is that the drive to think "holistically" must always be expressed with local color and ...

  4. Conducting Meta-Analysis Using SAS

    CERN Document Server

    Arthur, Winfried; Huffcutt, Allen I; Arthur, Winfred

    2001-01-01

    Conducting Meta-Analysis Using SAS reviews the meta-analysis statistical procedure and shows the reader how to conduct one using SAS. It presents and illustrates the use of the PROC MEANS procedure in SAS to perform the data computations called for by the two most commonly used meta-analytic procedures, the Hunter & Schmidt and Glassian approaches. This book serves as both an operational guide and user's manual by describing and explaining the meta-analysis procedures and then presenting the appropriate SAS program code for computing the pertinent statistics. The practical, step-by-step instru

  5. Biomass Conversion to Hydrocarbon Fuels Using the MixAlcoTM Process Conversion de la biomasse en combustibles hydrocarbonés au moyen du procédé MixAlcoTM

    Directory of Open Access Journals (Sweden)

    Taco-Vasquez S.

    2013-04-01

    Full Text Available The MixAlcoTM process converts biomass to hydrocarbons (e.g., gasoline using the following generic steps: pretreatment, fermentation, descumming, dewatering, thermal ketonization, distillation, hydrogenation, oligomerization and saturation. This study describes the production of bio-gasoline from chicken manure and shredded office paper, both desirable feedstocks that do not require pretreatment. Using a mixed culture of microorganisms derived from marine soil, the biomass was fermented to produce a dilute aqueous solution of carboxylate salts, which were subsequently descummed and dried. The dry salts were thermally converted to raw ketones, which were distilled to remove impurities. Using Raney nickel catalyst, the distilled ketones were hydrogenated to mixed secondary alcohols ranging from C3 to C12. Using zeolite HZSM-5 catalyst, these alcohols were oligomerized to hydrocarbons in a plug -flow reactor. Finally, these unsaturated hydrocarbons were hydrogenated to produce a mixture of hydrocarbons that can be blended into commercial gasoline. Le procédé MixAlcoTM convertit la biomasse en hydrocarbures (par exemple, en essence selon les étapes génériques suivantes : prétraitement, fermentation, écumage, déshydratation, cétonisation thermique, distillation, hydrogénation, oligomérisation et saturation. Cette étude décrit la production de bioessence à partir de fumier de poulet et de papier en lambeaux, ces deux sources étant des matières premières convoitées ne nécessitant pas de prétraitement. À l’aide d’une culture mixte de microorganismes dérivés de sols marins, la biomasse a été soumise à une fermentation de manière à produire une solution aqueuse diluée de sels de carboxylates, ultérieurement écumés et séchés. Les sels séchés ont été thermiquement convertis en cétones brutes, ensuite distillées afin d’éliminer les impuretés. À l’aide du catalyseur à base de nickel de Raney, les c

  6. SAS essentials mastering SAS for data analytics

    CERN Document Server

    Elliott, Alan C

    2015-01-01

    A step-by-step introduction to using SAS® statistical software as a foundational approach to data analysis and interpretation Presenting a straightforward introduction from the ground up, SAS® Essentials: Mastering SAS for Data Analytics, Second Edition illustrates SAS using hands-on learning techniques and numerous real-world examples. Keeping different experience levels in mind, the highly-qualified author team has developed the book over 20 years of teaching introductory SAS courses. Divided into two sections, the first part of the book provides an introduction to data manipulation, st

  7. SAS for dummies

    CERN Document Server

    McDaniel, Stephen

    2010-01-01

    The fun and easy way to learn to use this leading business intelligence tool Written by an author team who is directly involved with SAS, this easy-to-follow guide is fully updated for the latest release of SAS and covers just what you need to put this popular software to work in your business. SAS allows any business or enterprise to improve data delivery, analysis, reporting, movement across a company, data mining, forecasting, statistical analysis, and more. SAS For Dummies, 2nd Edition  gives you the necessary background on what SAS can do for you and explains how to use the Enterprise Guide. SAS provides statistical and data analysis tools to help you deal with all kinds of data: operational, financial, performance, and more Places special emphasis on Enterprise Guide and other analytical tools, covering all commonly used features Covers all commonly used features and shows you the practical applications you can put to work in your business Explores how to get various types of data into the software and...

  8. ProcSee - The Picasso successor

    International Nuclear Information System (INIS)

    Randem, Hans Olav; Jokstad, Haakon; Linden, Terje; Kvilesjoe, Hans Oeyvind; Rekvin, Sverre; Hornaes, Arne

    2005-09-01

    This report describes the history of computer graphics and Picasso at the Halden Project and how Picasso has been used at HRP, in HRP member organisations and in other organisations. It motivates the change of name from Picasso to ProcSee based on plans to extend the use of the product and to avoid a potential conflict regarding the name. It describes features introduced during the last years to motivate users to utilise new functionality, describes how tests shows that ProcSee has unique capabilities when it comes to performance for handling frequent display updates for large complex displays, and describes new planned features to be implemented in ProcSee. The report concludes that Picasso/ProcSee has been and will continue to be of vital importance for the HRP research programme within the fields of human-machine interface design and human-machine interaction. (Author)

  9. State Space Modeling Using SAS

    Directory of Open Access Journals (Sweden)

    Rajesh Selukar

    2011-05-01

    Full Text Available This article provides a brief introduction to the state space modeling capabilities in SAS, a well-known statistical software system. SAS provides state space modeling in a few different settings. SAS/ETS, the econometric and time series analysis module of the SAS system, contains many procedures that use state space models to analyze univariate and multivariate time series data. In addition, SAS/IML, an interactive matrix language in the SAS system, provides Kalman filtering and smoothing routines for stationary and nonstationary state space models. SAS/IML also provides support for linear algebra and nonlinear function optimization, which makes it a convenient environment for general-purpose state space modeling.

  10. Statistical data analysis using SAS intermediate statistical methods

    CERN Document Server

    Marasinghe, Mervyn G

    2018-01-01

    The aim of this textbook (previously titled SAS for Data Analytics) is to teach the use of SAS for statistical analysis of data for advanced undergraduate and graduate students in statistics, data science, and disciplines involving analyzing data. The book begins with an introduction beyond the basics of SAS, illustrated with non-trivial, real-world, worked examples. It proceeds to SAS programming and applications, SAS graphics, statistical analysis of regression models, analysis of variance models, analysis of variance with random and mixed effects models, and then takes the discussion beyond regression and analysis of variance to conclude. Pedagogically, the authors introduce theory and methodological basis topic by topic, present a problem as an application, followed by a SAS analysis of the data provided and a discussion of results. The text focuses on applied statistical problems and methods. Key features include: end of chapter exercises, downloadable SAS code and data sets, and advanced material suitab...

  11. Time Series Modelling using Proc Varmax

    DEFF Research Database (Denmark)

    Milhøj, Anders

    2007-01-01

    In this paper it will be demonstrated how various time series problems could be met using Proc Varmax. The procedure is rather new and hence new features like cointegration, testing for Granger causality are included, but it also means that more traditional ARIMA modelling as outlined by Box...

  12. An enhanced Planetary Radar Operating Centre (PROC)

    Science.gov (United States)

    Catallo, C.

    2010-12-01

    Planetary exploration by means of radar systems, mainly using GPRs is an important role of Italy and numerous scientific international space programs are carried out jointly with ESA and NASA by Italian Space Agency, the scientific community and the industry. Three experiments under Italian leadership ( designed and manufactured by the Italian industry) provided by ASI within a NASA/ESA/ASI joint venture framework are successfully operating: MARSIS on-board MEX, SHARAD on-board MRO and CASSINI Radar on-board Cassini spacecraft: the missions have been further extended . Three dedicated operational centers, namely SHOC, (Sharad Operating Centre), MOC (Marsis Operating Center) and CASSINI PAD are operating from the missions beginning to support all the scientific communities, institutional customers and experiment teams operation Each center is dedicated to a single instrument management and control, data processing and distribution and even if they had been conceived to operate autonomously and independently one from each other, synergies and overlaps have been envisaged leading to the suggestion of a unified center, the Planetary Radar Processing Center (PROC). In order to harmonize operations either from logistics point of view and from HW/SW capabilities point of view PROC is designed and developed for offering improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation. PROC is, therefore, conceived as the Italian support facility to the scientific community for on-going and future Italian planetary exploration programs, such as Europa-Jupiter System Mission (EJSM) The paper describes how the new PROC is designed and developed, to allow SHOC, MOC and CASSINI PAD to operate as before, and to offer improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation aiding scientists to increase their knowledge in the field of surface

  13. Introduction to SAS on VAX

    International Nuclear Information System (INIS)

    Kardaun, O.; Miura, Yukitoshi; Matsuda, Toshiaki; Tamai, Hiroshi.

    1991-06-01

    To analyse, among others, the H-mode data base, a new version (6.06) of the SAS system has been installed on the VAX 3200 Workstation at JFT-2M. In this report, we summarize how to use SAS interactively (i.e., in 'display manager mode') on this machine. By a didactical example program and its annotated output we illustrate some of the capabilities of SAS. The report is intended to facilitate the access to the SAS documentation by physicists interested in plasma physical applications. (author)

  14. SASWeave: Literate Programming Using SAS

    Directory of Open Access Journals (Sweden)

    Russell V. Lenth

    2007-05-01

    Full Text Available SASweave is a collection of scripts that allow one to embed SAS code into a LATEX document, and automatically incorporate the results as well. SASweave is patterned after Sweave, which does the same thing for code written in R. In fact, a document may contain both SAS and R code. Besides the convenience of being able to easily incorporate SAS examples in a document, SASweave facilitates the concept of “literate programming”: having code, documentation, and results packaged together. Among other things, this helps to ensure that the SAS output in the document is in concordance with the code.

  15. SASWeave: Literate Programming Using SAS

    DEFF Research Database (Denmark)

    Lenth, Russell V; Højsgaard, Søren

    2007-01-01

    SASweave is a collection of scripts that allow one to embed SAS code into a LATEX document, and automatically incorporate the results as well. SASweave is patterned after Sweave, which does the same thing for code written in R. In fact, a document may contain both SAS and R code. Besides...... the convenience of being able to easily incorporate SAS examples in a document, SASweave facilitates the concept of "literate programming": having code, documentation, and results packaged together. Among other things, this helps to ensure that the SAS output in the document is in concordance with the code...

  16. SAS validation and analysis of in-pile TUCOP experiments

    International Nuclear Information System (INIS)

    Morman, J.A.; Tentner, A.M.; Dever, D.J.

    1985-01-01

    The validation of the SAS4A accident analysis code centers on its capability to calculate the wide range of tests performed in the TREAT (Transient Reactor Test Facility) in-pile experiments program. This paper presents the SAS4A analysis of a simulated TUCOP (Transient-Under-Cooled-Over-Power) experiment using seven full-length PFR mixed oxide fuel pins in a flowing sodium loop. Calculations agree well with measured thermal-hydraulic, pin failure time and post-failure fuel motion data. The extent of the agreement confirms the validity of the models used in the SAS4A code to describe TUCOP accidents

  17. An implementation of SAS reg-sign in an environmental information system

    International Nuclear Information System (INIS)

    James, T.; Zygmunt, B.C.

    1994-01-01

    This paper describes a software environmental database information system that uses SAS to process data and ORACLE reg-sign as the relational database management system (RDBMS). The hardware includes a network of UNIX-based servers and workstations. The relational database consists of large tables containing envionmental measurement data, as well as other smaller tables with reference, metadata and internal administrative information. The data come in a variety of formats and must be converted to conform to the system's standards. SAS/ACCESS reg-sign and PROC SQL are used extensively in the data processing

  18. The WIMS-E module W-PROC

    International Nuclear Information System (INIS)

    Roth, M.J.; Harris, D.W.G.

    1980-07-01

    The program W-PROC is a module of the WIMS-E Scheme for neutronics calculations. W-PROC calculates collision probabilities for a system consisting of spherical grains packed in annular geometry, such as the fuel in a high temperature gas cooled reactor. This report describes the modelling approximations made and gives instructions for using the program. (U.K.)

  19. A SAS IML Macro for Loglinear Smoothing

    Science.gov (United States)

    Moses, Tim; von Davier, Alina

    2011-01-01

    Polynomial loglinear models for one-, two-, and higher-way contingency tables have important applications to measurement and assessment. They are essentially regarded as a smoothing technique, which is commonly referred to as loglinear smoothing. A SAS IML (SAS Institute, 2002a) macro was created to implement loglinear smoothing according to…

  20. Extending and Enhancing SAS (Static Analysis Suite)

    CERN Document Server

    Ho, David

    2016-01-01

    The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

  1. Social Analysis Systems (SAS2) - Phase III

    International Development Research Centre (IDRC) Digital Library (Canada)

    Scaling Up the International Impact of Action Research : Social Analysis ... up the international impact of action research : SAS phase 3; final technical report ... 000 Canadians abroad to work at the local level on various development issues.

  2. Mirror suspension system for the TAMA SAS

    CERN Document Server

    Takamori, A; Bertolini, A; Cella, G; DeSalvo, R; Fukushima, M; Iida, Y; Jacquier, F; Kawamura, S; Marka, S; Nishi, Y; Numata, K; Sannibale, V; Somiya, K; Takahashi, R; Tariq, H; Tsubono, K; Ugas, J; Viboud, N; Yamamoto, H; Yoda, T; Wang Chen Yang

    2002-01-01

    Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SU...

  3. Statistical hypothesis testing with SAS and R

    CERN Document Server

    Taeger, Dirk

    2014-01-01

    A comprehensive guide to statistical hypothesis testing with examples in SAS and R When analyzing datasets the following questions often arise:Is there a short hand procedure for a statistical test available in SAS or R?If so, how do I use it?If not, how do I program the test myself? This book answers these questions and provides an overview of the most commonstatistical test problems in a comprehensive way, making it easy to find and performan appropriate statistical test. A general summary of statistical test theory is presented, along with a basicdescription for each test, including the

  4. Homework Solutions S.A.S.

    OpenAIRE

    Acero Mora, Mariluz; Hernández Laguna, Liliana

    2012-01-01

    Homework Solutions S.A.S, será una empresa de servicios dedicada a brindar asesorías de tareas y trabajos bilingües con soluciones al instante sin que los padres de familia tengan que pagar por meses o semestres. Está previsto que dicha empresa empiece operaciones en el mes de Enero de 2013. Homework Solutions S.A.S, trabajará a domicilio, en los colegios que requieran sus servicios y en su sede principal ubicada al norte de la ciudad de Bogotá.

  5. Nyheder i SAS Analytics 14.2

    DEFF Research Database (Denmark)

    Milhøj, Anders

    2017-01-01

    I november 2016 blev Analytical Produts i den opdaterede version 14.2 sendt på markedet. Denne opdatering indeholder opdateringer af de analytiske programpakker inden for statistik, økonometri, operationsanalyse etc. Disse opdateringer er nu løsrevet fra samtidige opdateringer af det samlede SAS-program...

  6. Fitting polytomous Rasch models in SAS

    DEFF Research Database (Denmark)

    Christensen, Karl Bang

    2006-01-01

    The item parameters of a polytomous Rasch model can be estimated using marginal and conditional approaches. This paper describes how this can be done in SAS (V8.2) for three item parameter estimation procedures: marginal maximum likelihood estimation, conditional maximum likelihood estimation, an...

  7. Design and analysis of experiments with SAS

    CERN Document Server

    Lawson, John

    2010-01-01

    IntroductionStatistics and Data Collection Beginnings of Statistically Planned Experiments Definitions and Preliminaries Purposes of Experimental Design Types of Experimental Designs Planning Experiments Performing the Experiments Use of SAS SoftwareCompletely Randomized Designs with One Factor Introduction Replication and Randomization A Historical Example Linear Model for Completely Randomized Design (CRD) Verifying Assumptions of the Linear Model Analysis Strategies When Assumptions Are Violated Determining the Number of Replicates Comparison of Treatments after the F-TestFactorial Designs

  8. Mirror suspension system for the TAMA SAS

    International Nuclear Information System (INIS)

    Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Marka, Szabolcs; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Yamamoto, Hiroaki; Yoda, Tatsuo; Wang Chenyang

    2002-01-01

    Several R and D programmes are ongoing to develop the next generation of interferometric gravitational wave detectors providing the superior sensitivity desired for refined astronomical observations. In order to obtain a wide observation band at low frequencies, the optics need to be isolated from the seismic noise. The TAMA SAS (seismic attenuation system) has been developed within an international collaboration between TAMA, LIGO, and some European institutes, with the main objective of achieving sufficient low-frequency seismic attenuation (-180 dB at 10 HZ). The system suppresses seismic noise well below the other noise levels starting at very low frequencies above 10 Hz. It also includes an active inertial damping system to decrease the residual motion of the optics enough to allow a stable operation of the interferometer. The TAMA SAS also comprises a sophisticated mirror suspension subsystem (SUS). The SUS provides support for the optics and vibration isolation complementing the SAS performance. The SUS is equipped with a totally passive magnetic damper to suppress internal resonances without degrading the thermal noise performance. In this paper we discuss the SUS details and present prototype results

  9. Data processing and analysis with the autoPROC toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Vonrhein, Clemens, E-mail: vonrhein@globalphasing.com; Flensburg, Claus; Keller, Peter; Sharff, Andrew; Smart, Oliver; Paciorek, Wlodek; Womack, Thomas; Bricogne, Gérard [Global Phasing Ltd, Sheraton House, Castle Park, Cambridge CB3 0AX (United Kingdom)

    2011-04-01

    Typical topics and problems encountered during data processing of diffraction experiments are discussed and the tools provided in the autoPROC software are described. A typical diffraction experiment will generate many images and data sets from different crystals in a very short time. This creates a challenge for the high-throughput operation of modern synchrotron beamlines as well as for the subsequent data processing. Novice users in particular may feel overwhelmed by the tables, plots and numbers that the different data-processing programs and software packages present to them. Here, some of the more common problems that a user has to deal with when processing a set of images that will finally make up a processed data set are shown, concentrating on difficulties that may often show up during the first steps along the path of turning the experiment (i.e. data collection) into a model (i.e. interpreted electron density). Difficulties such as unexpected crystal forms, issues in crystal handling and suboptimal choices of data-collection strategies can often be dealt with, or at least diagnosed, by analysing specific data characteristics during processing. In the end, one wants to distinguish problems over which one has no immediate control once the experiment is finished from problems that can be remedied a posteriori. A new software package, autoPROC, is also presented that combines third-party processing programs with new tools and an automated workflow script that is intended to provide users with both guidance and insight into the offline processing of data affected by the difficulties mentioned above, with particular emphasis on the automated treatment of multi-sweep data sets collected on multi-axis goniostats.

  10. %HPGLIMMIX: A High-Performance SAS Macro for GLMM Estimation

    Directory of Open Access Journals (Sweden)

    Liang Xie

    2014-06-01

    Full Text Available Generalized linear mixed models (GLMMs comprise a class of widely used statistical tools for data analysis with fixed and random effects when the response variable has a conditional distribution in the exponential family. GLMM analysis also has a close relationship with actuarial credibility theory. While readily available programs such as the GLIMMIX procedure in SAS and the lme4 package in R are powerful tools for using this class of models, these progarms are not able to handle models with thousands of levels of fixed and random effects. By using sparse-matrix and other high performance techniques, procedures such as HPMIXED in SAS can easily fit models with thousands of factor levels, but only for normally distributed response variables. In this paper, we present the %HPGLIMMIX SAS macro that fits GLMMs with large number of sparsely populated design matrices using the doubly-iterative linearization (pseudo-likelihood method, in which the sparse-matrix-based HPMIXED is used for the inner iterations with the pseudo-variable constructed from the inverse-link function and the chosen model. Although the macro does not have the full functionality of the GLIMMIX procedure, time and memory savings can be large with the new macro. In applications in which design matrices contain many zeros and there are hundreds or thousands of factor levels, models can be fitted without exhausting computer memory, and 90% or better reduction in running time can be observed. Examples with a Poisson, binomial, and gamma conditional distribution are presented to demonstrate the usage and efficiency of this macro.

  11. Non-linear Growth Models in Mplus and SAS

    Science.gov (United States)

    Grimm, Kevin J.; Ram, Nilam

    2013-01-01

    Non-linear growth curves or growth curves that follow a specified non-linear function in time enable researchers to model complex developmental patterns with parameters that are easily interpretable. In this paper we describe how a variety of sigmoid curves can be fit using the Mplus structural modeling program and the non-linear mixed-effects modeling procedure NLMIXED in SAS. Using longitudinal achievement data collected as part of a study examining the effects of preschool instruction on academic gain we illustrate the procedures for fitting growth models of logistic, Gompertz, and Richards functions. Brief notes regarding the practical benefits, limitations, and choices faced in the fitting and estimation of such models are included. PMID:23882134

  12. Composites reinforcement by rods a SAS study

    CERN Document Server

    Urban, V; Pyckhout-Hintzen, W; Richter, D; Straube, E

    2002-01-01

    The mechanical properties of composites are governed by size, shape and dispersion degree of so-called reinforcing particles. Polymeric fillers based on thermodynamically driven microphase separation of block copolymers offer the opportunity to study a model system of controlled rod-like filler particles. We chose a triblock copolymer (PBPSPB) and carried out SAS measurements with both X-rays and neutrons, in order to characterize separately the hard phase and the cross-linked PB matrix. The properties of the material depend strongly on the way that stress is carried and transferred between the soft matrix and the hard fibers. The failure of the strain-amplification concept and the change of topological contributions to the free energy and scattering factor have to be addressed. In this respect the composite shows a similarity to a two-network system, i.e. interpenetrating rubber and rod-like filler networks. (orig.)

  13. Data Mining Supercomputing with SAS JMP® Genomics

    Directory of Open Access Journals (Sweden)

    Richard S. Segall

    2011-02-01

    Full Text Available JMP® Genomics is statistical discovery software that can uncover meaningful patterns in high-throughput genomics and proteomics data. JMP® Genomics is designed for biologists, biostatisticians, statistical geneticists, and those engaged in analyzing the vast stores of data that are common in genomic research (SAS, 2009. Data mining was performed using JMP® Genomics on the two collections of microarray databases available from National Center for Biotechnology Information (NCBI for lung cancer and breast cancer. The Gene Expression Omnibus (GEO of NCBI serves as a public repository for a wide range of highthroughput experimental data, including the two collections of lung cancer and breast cancer that were used for this research. The results for applying data mining using software JMP® Genomics are shown in this paper with numerous screen shots.

  14. The Prospects of SAS Interferometry for Detection and Classification (SAS Interferometrie voor Detectie en Classificatie)

    Science.gov (United States)

    2008-10-01

    DV2008A176 Opdrachtnummer Datum October 2008 Auteur (s) dr. R. van Vossen B.A.J. Quesson dr.ir. J.C. Sabel Rubricering rapport Ongerubriceerd TH9...TNO report | TNO-DV 2008 A176 4/44 Summary This report presents an overview of the theory and implementation of interferometric SAS processing at TNO... theory in software has been tested on two types of data, simulated and measured. Chapter 3 presents results obtained with simulated data; Chapter 4

  15. Regression modeling methods, theory, and computation with SAS

    CERN Document Server

    Panik, Michael

    2009-01-01

    Regression Modeling: Methods, Theory, and Computation with SAS provides an introduction to a diverse assortment of regression techniques using SAS to solve a wide variety of regression problems. The author fully documents the SAS programs and thoroughly explains the output produced by the programs.The text presents the popular ordinary least squares (OLS) approach before introducing many alternative regression methods. It covers nonparametric regression, logistic regression (including Poisson regression), Bayesian regression, robust regression, fuzzy regression, random coefficients regression,

  16. C-C1-04: How to Win Friends and Influence People with the SAS Output Delivery System

    Science.gov (United States)

    Tolbert, William

    2010-01-01

    Background and Aims: Long-time SAS users remember the days when SAS output was embarrassingly ugly. Version 7 saw the introduction of the Output Delivery System (ODS). ODS has matured into a very capable subsystem that gives users powerful reporting options. This presentation will highlight useful features and outline a macro-based system for handling multiple ODS destinations simultaneously. Nowadays there is no excuse for ugly SAS output! When building reports, SAS users should think about the needs of those using the reports. Some people just want to review frequency tables, and are happy to do so on a monitor. Others want to be able to print data for review in a meeting. And, there are always those that want to work with the data in a spreadsheet. Consider the ideal formats for each of the users outlined above. For the casual data browser, HTML output is ideal. For printing, PDF is preferred. And for the additional analysis, Excel is a popular option. With ODS, we can meet all of these needs. Methods: Because ODS permits opening multiple output destinations simultaneously, a single procedure can be used to generate data in HTML, PDF, and Excel at once. The presentation will demonstrate the following: o- basic ODS syntax for HTML, PDF, and Excel output o- custom HTML table of contents o- using the ExcelXP tagset for multi-tab spreadsheets o- a custom macro for managing multiple ODS destinations simultaneously o- simple PROC Template code for easy customization o- techniques for consistent output from multiple platforms. Results: The techniques outlined here have been well-received in a variety of business reporting environments. Conclusions: The SAS ODS provides a wide array of reporting options. Don’t limit yourself to just one type of output.

  17. Mixed

    Directory of Open Access Journals (Sweden)

    Pau Baya

    2011-05-01

    Full Text Available Remenat (Catalan (Mixed, "revoltillo" (Scrambled in Spanish, is a dish which, in Catalunya, consists of a beaten egg cooked with vegetables or other ingredients, normally prawns or asparagus. It is delicious. Scrambled refers to the action of mixing the beaten egg with other ingredients in a pan, normally using a wooden spoon Thought is frequently an amalgam of past ideas put through a spinner and rhythmically shaken around like a cocktail until a uniform and dense paste is made. This malleable product, rather like a cake mixture can be deformed pulling it out, rolling it around, adapting its shape to the commands of one’s hands or the tool which is being used on it. In the piece Mixed, the contortion of the wood seeks to reproduce the plasticity of this slow heavy movement. Each piece lays itself on the next piece consecutively like a tongue of incandescent lava slowly advancing but with unstoppable inertia.

  18. Probabilistic Reverse dOsimetry Estimating Exposure Distribution (PROcEED)

    Science.gov (United States)

    PROcEED is a web-based application used to conduct probabilistic reverse dosimetry calculations.The tool is used for estimating a distribution of exposure concentrations likely to have produced biomarker concentrations measured in a population.

  19. Adaptive beamforming for low frequency SAS imagery and bathymetry

    NARCIS (Netherlands)

    Hayes, M.P.; Hunter, A.J.

    2012-01-01

    Synthetic aperture side-scan sonar (SAS) is a mature technology for high-resolution sea floor imaging [1]. Interferometric synthetic aperture sonars (InSAS) use additional hydrophones in a vertical array for bathymetric mapping [2]. This has created high-resolution bathymetry in deep water

  20. Hotelli Radisson SAS mantra : jah, ma saan! / Kai Vare

    Index Scriptorium Estoniae

    Vare, Kai, 1968-

    2004-01-01

    Radisson SAS hotell Tallinnas on kliendirahulolu-uuringute järgi keti hotellide seas esimeste hulgas. Hotelli direktor Kaido Ojaperv ja müügijuht Ann-Kai Tõrs Radisson SAS-i standarditest, kliendi sajaprotsendilise rahulolu tagamise põhimõtetest, personali valikust, koolitusest. Kommenteerib Sandra Dimitrovich

  1. Model development of SAS4A and investigation on the initiating phase consequences in LMFRs related with material motion

    International Nuclear Information System (INIS)

    Niwa, H.

    1994-01-01

    This paper focuses on an analytical aspect of the initiating phase scenario and consequences of postulated core disruptive accident in liquid-metal-cooled fast breeder reactors. An analytical code, SAS4A, has been developed at Argonne National Laboratory, and introduced to PNC. Improvement and validation effort have been performed for the mixed-oxide version of SAS4A at PNC. This paper describes firstly recent development of SAS4A's material motion related models briefly. A fission gas mass transfer model and solid fuel chunk jamming model are developed and introduced to SAS4A, and validated using CABRI-2 E13 experimental data. Secondly, an investigation of the mechanism of energetics in the initiating phase of an unprotected loss-of-flow accident has identified major control parameters which are intimately related to core design parameters and material motion phenomena. (author)

  2. SAS and R data management, statistical analysis, and graphics

    CERN Document Server

    Kleinman, Ken

    2009-01-01

    An All-in-One Resource for Using SAS and R to Carry out Common TasksProvides a path between languages that is easier than reading complete documentationSAS and R: Data Management, Statistical Analysis, and Graphics presents an easy way to learn how to perform an analytical task in both SAS and R, without having to navigate through the extensive, idiosyncratic, and sometimes unwieldy software documentation. The book covers many common tasks, such as data management, descriptive summaries, inferential procedures, regression analysis, and the creation of graphics, along with more complex applicat

  3. Structures of SAS-6 suggest its organization in centrioles.

    Science.gov (United States)

    van Breugel, Mark; Hirono, Masafumi; Andreeva, Antonina; Yanagisawa, Haru-aki; Yamaguchi, Shoko; Nakazawa, Yuki; Morgner, Nina; Petrovich, Miriana; Ebong, Ima-Obong; Robinson, Carol V; Johnson, Christopher M; Veprintsev, Dmitry; Zuber, Benoît

    2011-03-04

    Centrioles are cylindrical, ninefold symmetrical structures with peripheral triplet microtubules strictly required to template cilia and flagella. The highly conserved protein SAS-6 constitutes the center of the cartwheel assembly that scaffolds centrioles early in their biogenesis. We determined the x-ray structure of the amino-terminal domain of SAS-6 from zebrafish, and we show that recombinant SAS-6 self-associates in vitro into assemblies that resemble cartwheel centers. Point mutations are consistent with the notion that centriole formation in vivo depends on the interactions that define the self-assemblies observed here. Thus, these interactions are probably essential to the structural organization of cartwheel centers.

  4. Archive of Census Related Products (ACRP): 1980 SAS Transport Files

    Data.gov (United States)

    National Aeronautics and Space Administration — The 1980 SAS Transport Files portion of the Archive of Census Related Products (ACRP) contains housing and population demographics from the 1980 Summary Tape File...

  5. Napojení .NET / Java technologie na SAS BI

    OpenAIRE

    Jandák, Miroslav

    2009-01-01

    This thesis is focused on SAS Enterprise Intelligence Platform product and it's capabilities to integrate within a Business Intelligence solution. The aim of the thesis is to describe integration technolgies that the platform features, as well as to determine their application field and compare them, eventually add usage examples. The first part of the thesis explains the general concept and architecture of Business Intelligence, afterwards the reader gets familiar with the SAS Enterprise Int...

  6. Procédés de production d'aliments non conventionnels pour porcs à ...

    African Journals Online (AJOL)

    SARAH

    30 juil. 2013 ... CFA, va créer un manque à gagner de 12 à 13 millions de F CFA sur ... mise au point de tels procédés permettrait de créer de la valeur ajoutée ..... Comparaison participatoire de trois méthodes .... chevaux, poissons. Ouvrage ...

  7. Development and validation of a smartphone addiction scale (SAS).

    Science.gov (United States)

    Kwon, Min; Lee, Joon-Yeop; Won, Wang-Youn; Park, Jae-Woo; Min, Jung-Ah; Hahn, Changtae; Gu, Xinyu; Choi, Ji-Hye; Kim, Dai-Jin

    2013-01-01

    The aim of this study was to develop a self-diagnostic scale that could distinguish smartphone addicts based on the Korean self-diagnostic program for Internet addiction (K-scale) and the smartphone's own features. In addition, the reliability and validity of the smartphone addiction scale (SAS) was demonstrated. A total of 197 participants were selected from Nov. 2011 to Jan. 2012 to accomplish a set of questionnaires, including SAS, K-scale, modified Kimberly Young Internet addiction test (Y-scale), visual analogue scale (VAS), and substance dependence and abuse diagnosis of DSM-IV. There were 64 males and 133 females, with ages ranging from 18 to 53 years (M = 26.06; SD = 5.96). Factor analysis, internal-consistency test, t-test, ANOVA, and correlation analysis were conducted to verify the reliability and validity of SAS. Based on the factor analysis results, the subscale "disturbance of reality testing" was removed, and six factors were left. The internal consistency and concurrent validity of SAS were verified (Cronbach's alpha = 0.967). SAS and its subscales were significantly correlated with K-scale and Y-scale. The VAS of each factor also showed a significant correlation with each subscale. In addition, differences were found in the job (psmartphone addiction scores (psmartphone addiction aspect of the diagnostic manual. This scale was proven to be relatively reliable and valid.

  8. Development and validation of a smartphone addiction scale (SAS.

    Directory of Open Access Journals (Sweden)

    Min Kwon

    Full Text Available OBJECTIVE: The aim of this study was to develop a self-diagnostic scale that could distinguish smartphone addicts based on the Korean self-diagnostic program for Internet addiction (K-scale and the smartphone's own features. In addition, the reliability and validity of the smartphone addiction scale (SAS was demonstrated. METHODS: A total of 197 participants were selected from Nov. 2011 to Jan. 2012 to accomplish a set of questionnaires, including SAS, K-scale, modified Kimberly Young Internet addiction test (Y-scale, visual analogue scale (VAS, and substance dependence and abuse diagnosis of DSM-IV. There were 64 males and 133 females, with ages ranging from 18 to 53 years (M = 26.06; SD = 5.96. Factor analysis, internal-consistency test, t-test, ANOVA, and correlation analysis were conducted to verify the reliability and validity of SAS. RESULTS: Based on the factor analysis results, the subscale "disturbance of reality testing" was removed, and six factors were left. The internal consistency and concurrent validity of SAS were verified (Cronbach's alpha = 0.967. SAS and its subscales were significantly correlated with K-scale and Y-scale. The VAS of each factor also showed a significant correlation with each subscale. In addition, differences were found in the job (p<0.05, education (p<0.05, and self-reported smartphone addiction scores (p<0.001 in SAS. CONCLUSIONS: This study developed the first scale of the smartphone addiction aspect of the diagnostic manual. This scale was proven to be relatively reliable and valid.

  9. A new cavity model for SAS4A

    International Nuclear Information System (INIS)

    Moxon, D.; Camous, F.

    1994-01-01

    The SAS4 code is the fourth generation of the SAS series developed at the ANL to study the initiating phase of hypothetical core disruptive accidents in LMFBRs. It was made available to the CEA in order to obtain more validation studies and model developments. The new cavity model described and incorporated in the code was first developed as a stand-alone code. It was thoroughly tested numerically and found to be quick and stable. Tis paper describes only the physical phenomena taken into account

  10. Want independent validation and assurance? Ask for a SAS-70.

    Science.gov (United States)

    Boutin, Christopher C

    2008-08-01

    The AICPA's Statement on Auditing Standards No.70, Service Organizations addresses CPA audits of service providers conducted to verify that a provider has adequate controls over its operations. Hospitals should request a SAS-70, the report produced by such an audit, from all of their third-party service providers. SAS-70s can be issued for a specific date or for a six-month period, and they typically consist of three sections: a CPA opinion, a description of controls, and information about the design of the controls.

  11. Síndrome de apnea del sueño (SAS Sleep apnea syndrome

    Directory of Open Access Journals (Sweden)

    Camilo José Borrego Abello

    1994-03-01

    Full Text Available Se describe el síndrome de apnea del sueño (SAS abarcando los aspectos históricos, signos y síntomas, las diversas modalidades (apneas obstructiva, central y mixta, complicaciones, principalmente cardiovasculares y cerebrovasculares y formas de tratamiento. Se hace énfasis en la ayuda diagnóstica del polisomnograma que ha permitido definir como SAS síntomas antes considerados inespecíficos y cuantificar su gravedad. Se describen las diversas medidas terapéuticas, locales y generales, recalcando los beneficios que se obtienen con la aplicación de los aparatos de respiración a presión positiva. Estos permiten tratamientos no invasivos que hacen desaparecer la totalidad de los síntomas y evitan los riesgos incrementados de trastornos cardiovasculares y accidentes laborales o de tránsito. Este grave síndrome afecta a un grupo grande de población por lo que su importancia es indudable.

    Different aspects of the sleep apnea síndrome (SAS are described, including history, clinical manifestations, clinical forms (obstructive, central and mixed, cardiovascular, cerebrovascular and other complications and treatment. With the use of the polysomnogram it has been possible to define non-specific symptoms as due to SAS and to quantitate their seriousness. Different therapeutic approaches are described, both local and systemic, with emphasis on the benefits obtained from the use of positive pressure breathing machines which control every manifestation of the syndrome and avoid the increased cardiovascular risks aswell as work and traffic accidents. This syndrome is important in terms of frequency and of increased death risk.

  12. SAS- Semantic Annotation Service for Geoscience resources on the web

    Science.gov (United States)

    Elag, M.; Kumar, P.; Marini, L.; Li, R.; Jiang, P.

    2015-12-01

    There is a growing need for increased integration across the data and model resources that are disseminated on the web to advance their reuse across different earth science applications. Meaningful reuse of resources requires semantic metadata to realize the semantic web vision for allowing pragmatic linkage and integration among resources. Semantic metadata associates standard metadata with resources to turn them into semantically-enabled resources on the web. However, the lack of a common standardized metadata framework as well as the uncoordinated use of metadata fields across different geo-information systems, has led to a situation in which standards and related Standard Names abound. To address this need, we have designed SAS to provide a bridge between the core ontologies required to annotate resources and information systems in order to enable queries and analysis over annotation from a single environment (web). SAS is one of the services that are provided by the Geosematnic framework, which is a decentralized semantic framework to support the integration between models and data and allow semantically heterogeneous to interact with minimum human intervention. Here we present the design of SAS and demonstrate its application for annotating data and models. First we describe how predicates and their attributes are extracted from standards and ingested in the knowledge-base of the Geosemantic framework. Then we illustrate the application of SAS in annotating data managed by SEAD and annotating simulation models that have web interface. SAS is a step in a broader approach to raise the quality of geoscience data and models that are published on the web and allow users to better search, access, and use of the existing resources based on standard vocabularies that are encoded and published using semantic technologies.

  13. Modeling nest-survival data: a comparison of recently developed methods that can be implemented in MARK and SAS

    Directory of Open Access Journals (Sweden)

    Rotella, J. J.

    2004-06-01

    Full Text Available Estimating nest success and evaluating factors potentially related to the survival rates of nests are key aspects of many studies of avian populations. A strong interest in nest success has led to a rich literature detailing a variety of estimation methods for this vital rate. In recent years, modeling approaches have undergone especially rapid development. Despite these advances, most researchers still employ Mayfield’s ad-hoc method (Mayfield, 1961 or, in some cases, the maximum-likelihood estimator of Johnson (1979 and Bart & Robson (1982. Such methods permit analyses of stratified data but do not allow for more complex and realistic models of nest survival rate that include covariates that vary by individual, nest age, time, etc. and that may be continuous or categorical. Methods that allow researchers to rigorously assess the importance of a variety of biological factors that might affect nest survival rates can now be readily implemented in Program MARK and in SAS’s Proc GENMOD and Proc NLMIXED. Accordingly, use of Mayfield’s estimator without first evaluating the need for more complex models of nest survival rate cannot be justified. With the goal of increasing the use of more flexible methods, we first describe the likelihood used for these models and then consider the question of what the effective sample size is for computation of AICc. Next, we consider the advantages and disadvantages of these different programs in terms of ease of data input and model construction; utility/flexibility of generated estimates and predictions; ease of model selection; and ability to estimate variance components. An example data set is then analyzed using both MARK and SAS to demonstrate implementation of the methods with various models that contain nest-, group- (or block-, and time-specific covariates. Finally, we discuss improvements that would, if they became available, promote a better general understanding of nest survival rates.

  14. CTTITEM: SAS macro and SPSS syntax for classical item analysis.

    Science.gov (United States)

    Lei, Pui-Wa; Wu, Qiong

    2007-08-01

    This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

  15. Anatomy of the TAMA SAS seismic attenuation system

    International Nuclear Information System (INIS)

    Marka, Szabolcs; Takamori, Akiteru; Ando, Masaki; Bertolini, Alessandro; Cella, Giancarlo; DeSalvo, Riccardo; Fukushima, Mitsuhiro; Iida, Yukiyoshi; Jacquier, Florian; Kawamura, Seiji; Nishi, Yuhiko; Numata, Kenji; Sannibale, Virginio; Somiya, Kentaro; Takahashi, Ryutaro; Tariq, Hareem; Tsubono, Kimio; Ugas, Jose; Viboud, Nicolas; Wang Chenyang; Yamamoto, Hiroaki; Yoda, Tatsuo

    2002-01-01

    The TAMA SAS seismic attenuation system was developed to provide the extremely high level of seismic isolation required by the next generation of interferometric gravitational wave detectors to achieve the desired sensitivity at low frequencies. Our aim was to provide good performance at frequencies above ∼10 Hz, while utilizing only passive subsystems in the sensitive frequency band of the TAMA interferometric gravitational wave detectors. The only active feedback is relegated below 6 Hz and it is used to damp the rigid body resonances of the attenuation chain. Simulations, based on subsystem performance characterizations, indicate that the system can achieve rms mirror residual motion measured in a few tens of nanometres. We will give a brief overview of the subsystems and point out some of the characterization results, supporting our claims of achieved performance. SAS is a passive, UHV compatible and low cost system. It is likely that extremely sensitive experiments in other fields will also profit from our study

  16. Airbus A320 NEO Base Maintenance Concept SAS Operations

    OpenAIRE

    Dafgård, Oscar

    2017-01-01

    Detta arbete har utförts tillsammans med SAS, för att undersöka om ett base maintenance koncept med ett intervall på 36 månader skulle vara mer kostnadseffektivt än 24 månader för deras nya Airbus A320 NEO flotta. SAS, precis som alla andra flygbolag utnyttjar sina flygplan på sina egna och specifika vis. Eftersom inga flygbolag opererar på samma sätt kan inte heller underhållet skötas på samma sätt för en specifik flygplanstyp. Underhållsprogrammet behövde därför ses över för att optimeras g...

  17. Combination of functional MRI with SAS and MRA

    Energy Technology Data Exchange (ETDEWEB)

    Sumida, Masayuki; Takeshita, Shinichirou; Kutsuna, Munenori; Akimitsu, Tomohide; Arita, Kazunori; Kurisu, Kaoru [Hiroshima Univ. (Japan). School of Medicine

    1999-02-01

    For presurgical diagnosis of brain surface, combination of functional MRI (fMRI) with the MR angiography was examined. This method could visualize brain bay, convolution and vein as index of surface. Five normal adults (male, mean age: 28-year-old) and 7 patients with brain tumor on the main locus to surface (male: 4, female: 3, mean age: 52.3-year-old) were studied. fMRI was performed by SPGR method (TR 70, TE 40, flip angle 60, one slice, thickness 10 mm, FOV 20 cm, matrix 128 x 128). The brain surface was visualized by SAS (surface anatomy scanning). SAS was performed by FSE method (TR 6000, TE 200, echo train 16, thickness 20 mm, slice 3, NEX 2). Cortical veins near superior sagittal sinus were visualized by MRA with 2D-TOF method (TR 50, TE 20, flip angle 60, thickness 2 mm, slice 28, NEX 1). These images were superimposed and functional image of peripheral sensorimotor region was evaluated anatomically. In normal adults, high signal was visualized at another side of near sensorimotor region at 8 of 10 sides. All high signal area of fMRI agreed with cortical vein near sensorimotor region that was visualized by MRA. In patients with brain tumor, signal was visualized at another side of sensorimotor region of tumor without 2 cases with palsy. In another side of tumor, signal of fMRI was visualized in 5 of 7 cases. The tumor was visualized as opposite low signal field in SAS. Locational relation between tumor and brain surface and brain function was visualized distinctly by combination of MRA, SAS and MRA. This method could become useful for presurgical diagnosis. (K.H.)

  18. Quality assurance management plan (QAPP) special analytical support (SAS)

    Energy Technology Data Exchange (ETDEWEB)

    LOCKREM, L.L.

    1999-05-20

    It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data.

  19. Genome sequencing and annotation of Proteus sp. SAS71

    Directory of Open Access Journals (Sweden)

    Samy Selim

    2015-12-01

    Full Text Available We report draft genome sequence of Proteus sp. strain SAS71, isolated from water spring in Aljouf region, Saudi Arabia. The draft genome size is 3,037,704 bp with a G + C content of 39.3% and contains 6 rRNA sequence (single copies of 5S, 16S & 23S rRNA. The genome sequence can be accessed at DDBJ/EMBL/GenBank under the accession no. LDIU00000000.

  20. Quality assurance management plan (QAPP) special analytical support (SAS)

    International Nuclear Information System (INIS)

    LOCKREM, L.L.

    1999-01-01

    It is the policy of Special Analytical Support (SAS) that the analytical aspects of all environmental data generated and processed in the laboratory, subject to the Environmental Protection Agency (EPA), U.S. Department of Energy or other project specific requirements, be of known and acceptable quality. It is the intention of this QAPP to establish and assure that an effective quality controlled management system is maintained in order to meet the quality requirements of the intended use(s) of the data

  1. SPSS and SAS programming for the testing of mediation models.

    Science.gov (United States)

    Dudley, William N; Benuzillo, Jose G; Carrico, Mineh S

    2004-01-01

    Mediation modeling can explain the nature of the relation among three or more variables. In addition, it can be used to show how a variable mediates the relation between levels of intervention and outcome. The Sobel test, developed in 1990, provides a statistical method for determining the influence of a mediator on an intervention or outcome. Although interactive Web-based and stand-alone methods exist for computing the Sobel test, SPSS and SAS programs that automatically run the required regression analyses and computations increase the accessibility of mediation modeling to nursing researchers. To illustrate the utility of the Sobel test and to make this programming available to the Nursing Research audience in both SAS and SPSS. The history, logic, and technical aspects of mediation testing are introduced. The syntax files sobel.sps and sobel.sas, created to automate the computation of the regression analysis and test statistic, are available from the corresponding author. The reported programming allows the user to complete mediation testing with the user's own data in a single-step fashion. A technical manual included with the programming provides instruction on program use and interpretation of the output. Mediation modeling is a useful tool for describing the relation between three or more variables. Programming and manuals for using this model are made available.

  2. O papel do community manager Toluna SAS: comunidade online interativa

    OpenAIRE

    Faria, Filipa Maria Ferreira Prego de

    2014-01-01

    Atualmente, a maioria das empresas encontra-se ligada a uma das ferramentas mais poderosas do mundo: a internet. Com o crescimento deste fenómeno, surgem aplicativos para melhorarem o seu aproveitamento. As empresas começam a usufruir da Web 2.0, que visa a utilização da internet como uma plataforma social. O trabalho aqui apresentado pretende fazer uma análise profunda da empresa online Toluna SAS e explicar o surgimento do profissional responsável por essa plataforma social, o Community Man...

  3. Categorical Data Analysis With Sas and Spss Applications

    CERN Document Server

    Lawal, H Bayo

    2003-01-01

    This book covers the fundamental aspects of categorical data analysis with an emphasis on how to implement the models used in the book using SAS and SPSS. This is accomplished through the frequent use of examples, with relevant codes and instructions, that are closely related to the problems in the text. Concepts are explained in detail so that students can reproduce similar results on their own. Beginning with chapter two, exercises at the end of each chapter further strengthen students' understanding of the concepts by requiring them to apply some of the ideas expressed in the text in a more

  4. Modelling lactation curve for milk fat to protein ratio in Iranian buffaloes (Bubalus bubalis) using non-linear mixed models.

    Science.gov (United States)

    Hossein-Zadeh, Navid Ghavi

    2016-08-01

    The aim of this study was to compare seven non-linear mathematical models (Brody, Wood, Dhanoa, Sikka, Nelder, Rook and Dijkstra) to examine their efficiency in describing the lactation curves for milk fat to protein ratio (FPR) in Iranian buffaloes. Data were 43 818 test-day records for FPR from the first three lactations of Iranian buffaloes which were collected on 523 dairy herds in the period from 1996 to 2012 by the Animal Breeding Center of Iran. Each model was fitted to monthly FPR records of buffaloes using the non-linear mixed model procedure (PROC NLMIXED) in SAS and the parameters were estimated. The models were tested for goodness of fit using Akaike's information criterion (AIC), Bayesian information criterion (BIC) and log maximum likelihood (-2 Log L). The Nelder and Sikka mixed models provided the best fit of lactation curve for FPR in the first and second lactations of Iranian buffaloes, respectively. However, Wood, Dhanoa and Sikka mixed models provided the best fit of lactation curve for FPR in the third parity buffaloes. Evaluation of first, second and third lactation features showed that all models, except for Dijkstra model in the third lactation, under-predicted test time at which daily FPR was minimum. On the other hand, minimum FPR was over-predicted by all equations. Evaluation of the different models used in this study indicated that non-linear mixed models were sufficient for fitting test-day FPR records of Iranian buffaloes.

  5. Evaluation of pro-c global for identification of defects in protein c/s anticoagulant pathway

    International Nuclear Information System (INIS)

    Hanif, T.B.; Anwar, J.; Idrees, M.

    2011-01-01

    Background: Detection of protein C and S deficiency forms a major investigation in the laboratory evaluation of thrombophilia screening. It has key role in the diagnosis of protein C and S deficiency. The objective of this study is to determine the utility of ProC Global as a screening test for identifying the defects of protein C and S anticoagulant pathways. Methods: Two Hundred patients with venous thromboembolism were studied at the Department of Haematology, Armed Forces Institute of Pathology, Rawalpindi, from October 2004 to March 2006. ProC Global test (Dade Behring Diagnostics) was performed and was followed up by protein C and S assays. ProC Global is an activated partial thromboplastin time based assay in which Protac (snake venom from Aghistroden contortrix) is used for activation of the endogenous protein C of the plasma sample. The protein C activation time in the presence of the activator was set in relation to a parallel determination of PCAT/O with addition of a buffer instead of activator reagent. The ratio PCAT: PCAT/O was transformed in normalized ratio by relating them to a calibrator. Control plasma for normal range and ProC control plasma for pathological range (Dade Behring Diagnostics) were assayed in each run for quality control. Results: A total of 200 patients, 132 (66%) males and 68 (34%) females with age ranging from 1 to 68 years were studied. ProC Global was positive in 29/200 (14.5%) patients. ProC Global was found to be 86% sensitive, 94% specific and its overall efficiency turned out to be 94%. Conclusion: Pro-C Global can be used effectively as a screening test to detect abnormalities in protein C and S anticoagulant pathways. (author)

  6. Surface anatomy scanning (SAS) in intracranial tumours: comparison with surgical findings

    International Nuclear Information System (INIS)

    Sumida, M.; Uozumi, T.; Kiya, K.; Arita, K.; Kurisu, K.; Onda, J.; Satoh, H.; Ikawa, F.; Yukawa, O.; Migita, K.; Hada, H.; Katada, K.

    1995-01-01

    We evaluated the usefulness of surface anatomy scanning (SAS) in intracranial tumours, comparing it with surgical findings. We examined 31 patients with brain tumours preoperatively. The tumours included 16 meningiomas, 8 gliomas, 4 metastases and 3 others. SAS clearly demonstrated the tumours, allowing them to be distinguished from the structures of the brain surface, including oedema, except in cases of metastasis. SAS clearly demonstrated large cortical veins. SAS is useful for three-dimensional delineation of the brain surface before surgery. (orig.)

  7. SAS-macros for estimation and prediction in an model of the electricity consumption

    DEFF Research Database (Denmark)

    1998-01-01

    SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup.......SAS-macros for estimation and prediction in an model of the electricity consumption'' is a large collection of SAS-macros for handling a model of the electricity consumption in the Eastern Denmark. The macros are installed at Elkraft, Ballerup....

  8. Modeling binary correlated responses using SAS, SPSS and R

    CERN Document Server

    Wilson, Jeffrey R

    2015-01-01

    Statistical tools to analyze correlated binary data are spread out in the existing literature. This book makes these tools accessible to practitioners in a single volume. Chapters cover recently developed statistical tools and statistical packages that are tailored to analyzing correlated binary data. The authors showcase both traditional and new methods for application to health-related research. Data and computer programs will be publicly available in order for readers to replicate model development, but learning a new statistical language is not necessary with this book. The inclusion of code for R, SAS, and SPSS allows for easy implementation by readers. For readers interested in learning more about the languages, though, there are short tutorials in the appendix. Accompanying data sets are available for download through the book s website. Data analysis presented in each chapter will provide step-by-step instructions so these new methods can be readily applied to projects.  Researchers and graduate stu...

  9. SPSS and SAS programs for generalizability theory analyses.

    Science.gov (United States)

    Mushquash, Christopher; O'Connor, Brian P

    2006-08-01

    The identification and reduction of measurement errors is a major challenge in psychological testing. Most investigators rely solely on classical test theory for assessing reliability, whereas most experts have long recommended using generalizability theory instead. One reason for the common neglect of generalizability theory is the absence of analytic facilities for this purpose in popular statistical software packages. This article provides a brief introduction to generalizability theory, describes easy to use SPSS, SAS, and MATLAB programs for conducting the recommended analyses, and provides an illustrative example, using data (N = 329) for the Rosenberg Self-Esteem Scale. Program output includes variance components, relative and absolute errors and generalizability coefficients, coefficients for D studies, and graphs of D study results.

  10. pROC: an open-source package for R and S+ to analyze and compare ROC curves.

    Science.gov (United States)

    Robin, Xavier; Turck, Natacha; Hainard, Alexandre; Tiberti, Natalia; Lisacek, Frédérique; Sanchez, Jean-Charles; Müller, Markus

    2011-03-17

    Receiver operating characteristic (ROC) curves are useful tools to evaluate classifiers in biomedical and bioinformatics applications. However, conclusions are often reached through inconsistent use or insufficient statistical analysis. To support researchers in their ROC curves analysis we developed pROC, a package for R and S+ that contains a set of tools displaying, analyzing, smoothing and comparing ROC curves in a user-friendly, object-oriented and flexible interface. With data previously imported into the R or S+ environment, the pROC package builds ROC curves and includes functions for computing confidence intervals, statistical tests for comparing total or partial area under the curve or the operating points of different classifiers, and methods for smoothing ROC curves. Intermediary and final results are visualised in user-friendly interfaces. A case study based on published clinical and biomarker data shows how to perform a typical ROC analysis with pROC. pROC is a package for R and S+ specifically dedicated to ROC analysis. It proposes multiple statistical tests to compare ROC curves, and in particular partial areas under the curve, allowing proper ROC interpretation. pROC is available in two versions: in the R programming language or with a graphical user interface in the S+ statistical software. It is accessible at http://expasy.org/tools/pROC/ under the GNU General Public License. It is also distributed through the CRAN and CSAN public repositories, facilitating its installation.

  11. Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

    Index Scriptorium Estoniae

    Schults, Olev

    2008-01-01

    Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

  12. The IAEA Transport Safety Appraisal Service (TranSAS)

    International Nuclear Information System (INIS)

    Dicke, G.J.

    2004-01-01

    Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from the

  13. The IAEA Transport Safety Appraisal Service (TranSAS)

    Energy Technology Data Exchange (ETDEWEB)

    Dicke, G.J. [International Atomic Energy Agency, Vienna (Austria)

    2004-07-01

    Representatives of all Member States of the IAEA meet once a year in September at the General Conference in Vienna, Austria, to consider and approve the Agency's programme and budget and to address matters brought before it by the Board of Governors, the Director General, or Member States. In September 1998 the General Conference adopted resolution GC(42)/RES/13 on the Safety of Transport of Radioactive Materials. In adopting that resolution the General Conference recognized that compliance with regulations that take account of the IAEA Regulations for the Safe Transport of Radioactive Material (the IAEA Transport Regulations) is providing a high level of safety during the transport of radioactive material. Good compliance requires that the regulations are implemented effectively. The General Conference therefore requested the IAEA Secretariat to provide a service for carrying out, at the request of any State, an appraisal of the implementation of the Transport Regulations by that State. In response to this request the Director General of the IAEA offered such an appraisal service to all States in letter J1.01.Circ, dated 10 December 1998. The first Transport Safety Appraisal Service (TranSAS) was undertaken and completed at the request of Slovenia in 1999. A report on the results of that appraisal was published and released for general distribution in the early fall of 1999. In each of the General Conferences since 1998, resolutions focused on transport safety have commended the Secretariat for establishing the TranSAS, commended those States that have requested the appraisal service and encouraged other States to avail themselves of this service see GC(43)/RES/11, GC(44)/RES/17, GC(45)/RES/10, GC(46)/RES/9 and GC(47)/RES/7. Six appraisals have been carried out to date as follows: Slovenia, Brazil, United Kingdom, Turkey, Panama and France. This presentation provides an overview of the Transport Safety Appraisal Service and summarizes the major findings from

  14. Regard d’ensemble sur la codification de la procédure civile

    OpenAIRE

    Carbonnier, Jean

    2014-01-01

    M. le Premier Président, merci. Merci M. le Procureur Général, c’est pour moi un très grand honneur. En m’appelant à cette place, vous saviez que la matière que j’avais longuement enseignée à l’université et qui inévitablement, en retour, m’avait imprégné et déformé, la sociologie juridique, me fixait d’emblée à une distance respectable et respectueuse de ce qui devait être le sujet de cette réunion de l’après-midi – savoir, dans une vue d’ensemble, la codification de la procédure civile – ; ...

  15. [A SAS marco program for batch processing of univariate Cox regression analysis for great database].

    Science.gov (United States)

    Yang, Rendong; Xiong, Jie; Peng, Yangqin; Peng, Xiaoning; Zeng, Xiaomin

    2015-02-01

    To realize batch processing of univariate Cox regression analysis for great database by SAS marco program. We wrote a SAS macro program, which can filter, integrate, and export P values to Excel by SAS9.2. The program was used for screening survival correlated RNA molecules of ovarian cancer. A SAS marco program could finish the batch processing of univariate Cox regression analysis, the selection and export of the results. The SAS macro program has potential applications in reducing the workload of statistical analysis and providing a basis for batch processing of univariate Cox regression analysis.

  16. SAS3DC - A computer program to describe accidents in LMFBRs

    International Nuclear Information System (INIS)

    Angerer, G.; Arnecke, G.; Polch, A.

    1981-02-01

    The code system SAS3D - developed in the ANL - is at present the most adequate instrument for simulating accidents in the LMFBRs. SAS3DC is an improved version of this code system: the routine CLAZAS - modelling in SAS3D the motion of the fuel cladding - is replaced in the SAS3DC by the routine CMOT. CMOT describes the moving material not in the Lagrangian - as CLAZAS - but in the Eulerian system and is so able to register even small cladding-displacements. To complete the description of the SAS3DC-code the results of some sample problems are included. (orig.) [de

  17. Particle and particle systems characterization small-angle scattering (SAS) applications

    CERN Document Server

    Gille, Wilfried

    2016-01-01

    Small-angle scattering (SAS) is the premier technique for the characterization of disordered nanoscale particle ensembles. SAS is produced by the particle as a whole and does not depend in any way on the internal crystal structure of the particle. Since the first applications of X-ray scattering in the 1930s, SAS has developed into a standard method in the field of materials science. SAS is a non-destructive method and can be directly applied for solid and liquid samples. Particle and Particle Systems Characterization: Small-Angle Scattering (SAS) Applications is geared to any scientist who might want to apply SAS to study tightly packed particle ensembles using elements of stochastic geometry. After completing the book, the reader should be able to demonstrate detailed knowledge of the application of SAS for the characterization of physical and chemical materials.

  18. Le procédé du collage dans l’oeuvre de Max Ernst

    Directory of Open Access Journals (Sweden)

    Márcia Maria Valle Arbex

    2011-10-01

    Full Text Available Considerado um dos inventores da colagem, no sentido moderno da palavra, Max Ernst desenvolve a técnica estendendo sua prática e transformando-a em conceito. Nossa reflexão aborda este “recurso” sob ângulo de sua relação com a noção de imagem surrealista, a partir de exemplos de trabalhos executados em 1919-1920, onde as imagens vêm acompanhadas de legendas, formando o que chamamos de poema-duplo.Considéré l’un des créateurs du collage dans le sens moderne du mot, Max Ernst développe cete technique en élargissant sa pratique et en la transformant en concept. Notre réflexion porte sur ce “procédé”, sous l’angle de ses rapports avec la notion d’image poétique surréaliste, à partir d’exemples de travaux réalisés en 1919-1920, où des légendes accompagnent les images formant une sorte poème-double.

  19. Find the fish: using PROC SQL to build a relational database

    Science.gov (United States)

    Fabrizio, Mary C.; Nelson, Scott N.

    1995-01-01

    Reliable estimates of abundance and survival, gained through mark-recapture studies, are necessary to better understand how to manage and restore lake trout populations in the Great Lakes. Working with a 24-year data set from a mark-recapture study conducted in Lake Superior, we attempted to disclose information on tag shedding by examining recaptures of double-tagged fish. The data set consisted of 64,288 observations on fish which had been marked with one or more tags; a subset of these fish had been marked with two tags at initial capture. Although DATA and PROC statements could be used to obtain some of the information we sought, these statements could not be used to extract a complete set of results from the double-tagging experiments. We therefore used SQL processing to create three tables representing the same information but in a fully normalized relational structure. In addition, we created indices to efficiently examine complex relationships among the individual capture records. This approach allowed us to obtain all the information necessary to estimate tag retention through subsequent modeling. We believe that our success with SQL was due in large part to its ability to simultaneosly scan the same table more than once and to permit consideration of other tables in sub-queries.

  20. Validity of Simpson-Angus Scale (SAS) in a naturalistic schizophrenia population.

    Science.gov (United States)

    Janno, Sven; Holi, Matti M; Tuisku, Katinka; Wahlbeck, Kristian

    2005-03-17

    Simpson-Angus Scale (SAS) is an established instrument for neuroleptic-induced parkinsonism (NIP), but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry). Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's alpha, convergence to actometry and the capacity for NIP case detection were assessed. Cronbach's alpha for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

  1. Validity of Simpson-Angus Scale (SAS in a naturalistic schizophrenia population

    Directory of Open Access Journals (Sweden)

    Tuisku Katinka

    2005-03-01

    Full Text Available Abstract Background Simpson-Angus Scale (SAS is an established instrument for neuroleptic-induced parkinsonism (NIP, but its statistical properties have been studied insufficiently. Some shortcomings concerning its content have been suggested as well. According to a recent report, the widely used SAS mean score cut-off value 0.3 of for NIP detection may be too low. Our aim was to evaluate SAS against DSM-IV diagnostic criteria for NIP and objective motor assessment (actometry. Methods Ninety-nine chronic institutionalised schizophrenia patients were evaluated during the same interview by standardised actometric recording and SAS. The diagnosis of NIP was based on DSM-IV criteria. Internal consistency measured by Cronbach's α, convergence to actometry and the capacity for NIP case detection were assessed. Results Cronbach's α for the scale was 0.79. SAS discriminated between DSM-IV NIP and non-NIP patients. The actometric findings did not correlate with SAS. ROC-analysis yielded a good case detection power for SAS mean score. The optimal threshold value of SAS mean score was between 0.65 and 0.95, i.e. clearly higher than previously suggested threshold value. Conclusion We conclude that SAS seems a reliable and valid instrument. The previously commonly used cut-off mean score of 0.3 has been too low resulting in low specificity, and we suggest a new cut-off value of 0.65, whereby specificity could be doubled without loosing sensitivity.

  2. Analysis of metal fuel transient overpower experiments with the SAS4A accident analysis code

    International Nuclear Information System (INIS)

    Tentner, A.M.; Kalimullah; Miles, K.J.

    1990-01-01

    The results of the SAS4A analysis of the M7 TREAT Metal fuel experiment are presented. New models incorporated in the metal fuel version of SAS4A are described. The computational results are compared with the experimental observations and this comparison is used in the interpretation of physical phenomena. This analysis was performed using the integrated metal fuel SAS4A version and covers a wide range of events, providing an increased degree of confidence in the SAS4A metal fuel accident analysis capabilities

  3. Pro-C5, a marker of true type V collagen formation and fibrillation, correlates with portal hypertension in patients with alcoholic cirrhosis

    DEFF Research Database (Denmark)

    Leeming, Diana J; Veidal, Sanne S; Karsdal, Morten A

    2015-01-01

    Pro-C5 reflects liver hemodynamics, liver function, disease stage and clinically significant portal hypertension (PH). A multimarker model in combination with clinical scores predicted HVPG and separated clinical relevant HVPG thresholds. Plasma Pro-C5 may be suitable for the noninvasive evaluation...

  4. Evaluation of sleep apnea syndrome (SAS) with low field MR fluoroscopy

    International Nuclear Information System (INIS)

    Fukatsu, Hiroshi; Ando, Yoko; Ishigaki, Takeo; Okada, Tamotsu.

    1995-01-01

    Eight cases of clinically diagnosed sleep apnea syndrome (SAS) and two normal volunteers were studied with low field MR fluoroscopy in order to monitor the waking and sleeping status of the upper airway. MR fluoroscopy revealed that only the sleeping patients showed occlusions of the upper airway. This technique provided us with useful information about the level, frequency and duration of occlusion in each case. Four of the eight patients demonstrated simple retropalatal occlusion, whereas the other four demonstrated mixed retropalatal and retropalato-retroglossal occlusion. Thus long-time monitoring, which is only possible with MR fluoroscopy, is needed to appreciate the complex nature of the disease. In addition, the comfortable surroundings and low noise level provided by the low field enabled physiological study to be performed without any tranquilizers in most of the patients, which is again only possible with MR fluoroscopy. MR fluoroscopy may become a tool of great clinical value, providing much important information for disease evaluation and treatment selection. (author)

  5. Social Anxiety Scale for Adolescents (SAS-A): Measuring Social Anxiety among Finnish Adolescents

    Science.gov (United States)

    Ranta, Klaus; Junttila, Niina; Laakkonen, Eero; Uhmavaara, Anni; La Greca, Annette M.; Niemi, Paivi M.

    2012-01-01

    The aim of this study was to investigate symptoms of social anxiety and the psychometric properties of the "Social Anxiety Scale for Adolescents" (SAS-A) among Finnish adolescents, 13-16 years of age. Study 1 (n = 867) examined the distribution of SAS-A scores according to gender and age, and the internal consistency and factor structure…

  6. SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

    Index Scriptorium Estoniae

    Eilart, Andres

    2007-01-01

    SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

  7. SAS üritab panna riiki lennufirma aktsiaid müüma / Lemmi Kann

    Index Scriptorium Estoniae

    Kann, Lemmi

    2007-01-01

    SAS-i eesmärgiks on saada enamusosalus nii Estonian Airis kui ka airBalticus, et seeläbi oma positsioone Baltimaades kinnistada. Diagramm: Estonian Airi majandusnäitajad ja omanikud. Vt. samas: SAS on Estonian Airi jahtinud kaua. Kommenteerib Raivo Vare

  8. [Standardization of the Greek version of Zung's Self-rating Anxiety Scale (SAS)].

    Science.gov (United States)

    Samakouri, M; Bouhos, G; Kadoglou, M; Giantzelidou, A; Tsolaki, K; Livaditis, M

    2012-01-01

    Self-rating Anxiety Scale (SAS), introduced by Zung, has been widely used in research and in clinical practice for the detection of anxiety. The present study aims at standardizing the Greek version of SAS. SAS consists of 20 items rated on a 1-4 likert type scale. The total SAS score may vary from 20 (no anxiety at all) to 80 (severe anxiety). Two hundred and fifty four participants (114 male and 140 female), psychiatric patients, physically ill and general population individuals, aged 45.40±11.35 years, completed the following: (a) a demographic characteristics' questionnaire, (b) the SAS Greek version, (c) the Spielberg's Modified Greek State-Trait Anxiety Scale (STAI-Gr.-X) and (d) the Zung Depression Rating Scale (ZDRS). Seventy six participants answered the SAS twice within a 12th-day median period of time. The following parameters were calculated: (a) internal consistency of the SAS in terms of Cronbach's α co-efficient, (b) its test-retest reliability in terms of the Intraclass Correlation Coefficient (ICC) and (c) its concurrent and convergent validities through its score's Spearman's rho correlations with both the state and trait subscales of STAI-Gr X and the ZDRS. In addition, in order to evaluate SAS' discriminant validity, the scale's scores of the three groups of participants (psychiatric patients, physically ill and general population individuals) were compared among each other, in terms of Kruskall Wallis and Mann Whitney U tests. SAS Cronbach's alpha equals 0.897 while ICC regarding its test-retest reliability equals 0.913. Spearman's rho concerning validity: (a) when SAS is compared to STAI-Gr.-X (state), equals it 0.767, (b) when SAS is compared to STAI-Gr. X (trait), it equals 0.802 and (c) when SAS is compared to ZDRS, it equals 0.835. The mentally ill scored significantly higher in SAS compared to both the healthy and the general population. In conclusion, the SAS Greek version presents very satisfactory psychometric properties regarding

  9. SAS-1 Is a C2 Domain Protein Critical for Centriole Integrity in C. elegans

    Science.gov (United States)

    Delattre, Marie; Balestra, Fernando R.; Blanchoud, Simon; Finger, Susanne; Knott, Graham; Müller-Reichert, Thomas; Gönczy, Pierre

    2014-01-01

    Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD) syndrome. PMID:25412110

  10. SAS-1 is a C2 domain protein critical for centriole integrity in C. elegans.

    Directory of Open Access Journals (Sweden)

    Lukas von Tobel

    2014-11-01

    Full Text Available Centrioles are microtubule-based organelles important for the formation of cilia, flagella and centrosomes. Despite progress in understanding the underlying assembly mechanisms, how centriole integrity is ensured is incompletely understood, including in sperm cells, where such integrity is particularly critical. We identified C. elegans sas-1 in a genetic screen as a locus required for bipolar spindle assembly in the early embryo. Our analysis reveals that sperm-derived sas-1 mutant centrioles lose their integrity shortly after fertilization, and that a related defect occurs when maternal sas-1 function is lacking. We establish that sas-1 encodes a C2 domain containing protein that localizes to centrioles in C. elegans, and which can bind and stabilize microtubules when expressed in human cells. Moreover, we uncover that SAS-1 is related to C2CD3, a protein required for complete centriole formation in human cells and affected in a type of oral-facial-digital (OFD syndrome.

  11. First report of sasX-positive methicillin-resistant Staphylococcus aureus in Japan.

    Science.gov (United States)

    Nakaminami, Hidemasa; Ito, Teruyo; Han, Xiao; Ito, Ayumu; Matsuo, Miki; Uehara, Yuki; Baba, Tadashi; Hiramatsu, Keiichi; Noguchi, Norihisa

    2017-09-01

    SasX is a known virulence factor of Staphylococcus aureus involved in colonisation and immune evasion of the bacterium. The sasX gene, which is located on the ϕSPβ prophage, is frequently found in the sequence type (ST) 239 S. aureus lineage, which is the predominant healthcare-associated clone in Asian countries. In Japan, ST239 clones have rarely been identified, and sasX-positive strains have not been reported to date. Here, we report the first identification of 18 sasX-positive methicillin-resistant S. aureus (MRSA) strains in Japanese hospitals between 2009 and 2011. All sasX-positive isolates belonged to an ST239-staphylococcal cassette chromosome mec type III (ST239-III) lineage. However, we were unable to identify additional sasX-positive MRSA strains from 2012 to 2016, indicating that the small epidemic of sasX-positive isolates observed in this study was temporary. The sequence surrounding sasX in the strain TOHH628 lacked 51 genes that encode phage packaging and structural proteins, and no bacteriophage was induced by mitomycin C. Additionally, in the TOHH628 strain, the region (64.6 kb) containing sasX showed high identity to the ϕSPβ-like element (71.3 kb) of the Taiwanese MRSA strain Z172. The data strongly suggest that the present sasX-positive isolates found in Japanese hospitals were transmitted incidentally from other countries. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  12. SAS-6 assembly templated by the lumen of cartwheel-less centrioles precedes centriole duplication.

    Science.gov (United States)

    Fong, Chii Shyang; Kim, Minhee; Yang, T Tony; Liao, Jung-Chi; Tsou, Meng-Fu Bryan

    2014-07-28

    Centrioles are 9-fold symmetric structures duplicating once per cell cycle. Duplication involves self-oligomerization of the centriolar protein SAS-6, but how the 9-fold symmetry is invariantly established remains unclear. Here, we found that SAS-6 assembly can be shaped by preexisting (or mother) centrioles. During S phase, SAS-6 molecules are first recruited to the proximal lumen of the mother centriole, adopting a cartwheel-like organization through interactions with the luminal wall, rather than via their self-oligomerization activity. The removal or release of luminal SAS-6 requires Plk4 and the cartwheel protein STIL. Abolishing either the recruitment or the removal of luminal SAS-6 hinders SAS-6 (or centriole) assembly at the outside wall of mother centrioles. After duplication, the lumen of engaged mother centrioles becomes inaccessible to SAS-6, correlating with a block for reduplication. These results lead to a proposed model that centrioles may duplicate via a template-based process to preserve their geometry and copy number. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Mesures de procédure spéciales et respect des droits de l'homme Rapport général

    NARCIS (Netherlands)

    Vervaele, J.A.E.

    2009-01-01

    Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le

  14. Diagnòstics d'infermeria vinculats al procés migratori: visió dels inmigrants

    OpenAIRE

    Rifà i Ros, Maria Rosa

    2012-01-01

    L’objectiu general d’aquesta investigació pretén identificar els diagnòstics d’infermeria NANDA predominants en la població immigrant, vinculats al procés migratori i està emmarcada en el Model de Competència Cultural de Purnell i en el model Outcome Present State Test (OPT) de raonament clínic de Pesut i Herman. Tenint en compte els objectius d’aquesta recerca, aquesta s’aborda des del paradigma qualitatiu i seguint les propostes de la investigació fenomenològica que busca descobrir els s...

  15. Procédé et dispositif de lombrifiltration pour l'assainissement des eaux usées

    OpenAIRE

    DUCLOS, Lucie; FILLIT, Fabien; SOTO, Patricio; BRUNEAU, Denis

    2013-01-01

    L'objet de l'invention est un dispositif de lombrifiltration pour l'assainissement des eaux usées, dans une habitation individuelle comprenant un lombrifiltre (18) ainsi que des moyens (16) de prétraitement par réduction des dimensions des particules solides des effluents eaux usées, des moyens (20) de post-traitement et une sortie (22) des eaux claires. L'invention couvre également le procédé associé.

  16. Centriolar SAS-7 acts upstream of SPD-2 to regulate centriole assembly and pericentriolar material formation

    Science.gov (United States)

    Sugioka, Kenji; Hamill, Danielle R; Lowry, Joshua B; McNeely, Marie E; Enrick, Molly; Richter, Alyssa C; Kiebler, Lauren E; Priess, James R; Bowerman, Bruce

    2017-01-01

    The centriole/basal body is a eukaryotic organelle that plays essential roles in cell division and signaling. Among five known core centriole proteins, SPD-2/Cep192 is the first recruited to the site of daughter centriole formation and regulates the centriolar localization of the other components in C. elegans and in humans. However, the molecular basis for SPD-2 centriolar localization remains unknown. Here, we describe a new centriole component, the coiled-coil protein SAS-7, as a regulator of centriole duplication, assembly and elongation. Intriguingly, our genetic data suggest that SAS-7 is required for daughter centrioles to become competent for duplication, and for mother centrioles to maintain this competence. We also show that SAS-7 binds SPD-2 and regulates SPD-2 centriolar recruitment, while SAS-7 centriolar localization is SPD-2-independent. Furthermore, pericentriolar material (PCM) formation is abnormal in sas-7 mutants, and the PCM-dependent induction of cell polarity that defines the anterior-posterior body axis frequently fails. We conclude that SAS-7 functions at the earliest step in centriole duplication yet identified and plays important roles in the orchestration of centriole and PCM assembly. DOI: http://dx.doi.org/10.7554/eLife.20353.001 PMID:28092264

  17. SAS-6 engineering reveals interdependence between cartwheel and microtubules in determining centriole architecture.

    Science.gov (United States)

    Hilbert, Manuel; Noga, Akira; Frey, Daniel; Hamel, Virginie; Guichard, Paul; Kraatz, Sebastian H W; Pfreundschuh, Moritz; Hosner, Sarah; Flückiger, Isabelle; Jaussi, Rolf; Wieser, Mara M; Thieltges, Katherine M; Deupi, Xavier; Müller, Daniel J; Kammerer, Richard A; Gönczy, Pierre; Hirono, Masafumi; Steinmetz, Michel O

    2016-04-01

    Centrioles are critical for the formation of centrosomes, cilia and flagella in eukaryotes. They are thought to assemble around a nine-fold symmetric cartwheel structure established by SAS-6 proteins. Here, we have engineered Chlamydomonas reinhardtii SAS-6-based oligomers with symmetries ranging from five- to ten-fold. Expression of a SAS-6 mutant that forms six-fold symmetric cartwheel structures in vitro resulted in cartwheels and centrioles with eight- or nine-fold symmetries in vivo. In combination with Bld10 mutants that weaken cartwheel-microtubule interactions, this SAS-6 mutant produced six- to eight-fold symmetric cartwheels. Concurrently, the microtubule wall maintained eight- and nine-fold symmetries. Expressing SAS-6 with analogous mutations in human cells resulted in nine-fold symmetric centrioles that exhibited impaired length and organization. Together, our data suggest that the self-assembly properties of SAS-6 instruct cartwheel symmetry, and lead us to propose a model in which the cartwheel and the microtubule wall assemble in an interdependent manner to establish the native architecture of centrioles.

  18. C-C1-04: How to Win Friends and Influence People with the SAS Output Delivery System

    OpenAIRE

    Tolbert, William

    2010-01-01

    Background and Aims: Long-time SAS users remember the days when SAS output was embarrassingly ugly. Version 7 saw the introduction of the Output Delivery System (ODS). ODS has matured into a very capable subsystem that gives users powerful reporting options. This presentation will highlight useful features and outline a macro-based system for handling multiple ODS destinations simultaneously. Nowadays there is no excuse for ugly SAS output! When building reports, SAS users should think about ...

  19. Unsteady Simulations of the Flow in a Channel Flow and a Ventilated Room Using the SST-SAS Model

    DEFF Research Database (Denmark)

    Davidson, Lars; Nielsen, Peter V.

    The SAS model (Scale Adapted Simulation) was invented by Menter and his co-workers. The idea behind the SST-SAS model is to add an additional production term - the SAS term - in the w equation which is sensitive to resolved (i.e. unsteady) fluctuations. In regions where the flow is on the limit...

  20. Validation of the metal fuel version of the SAS4A accident analysis code

    International Nuclear Information System (INIS)

    Tentner, A.M.

    1991-01-01

    This paper describes recent work directed towards the validation of the metal fuel version of the SAS4A accident analysis code. The SAS4A code system has been developed at Argonne National Laboratory for the simulation of hypothetical severe accidents in Liquid Metal-Cooled Reactors (LMR), designed to operate in a fast neutron spectrum. SAS4A was initially developed for the analysis of oxide-fueled liquid metal-cooled reactors and has played an important role in the simulation and assessment of the energetics potential for postulated severe accidents in these reactors. Due to the current interest in the metal-fueled liquid metal-cooled reactors, a metal fuel version of the SAS4A accident analysis code is being developed in the Integral Fast Reactor program at Argonne. During such postulated accident scenarios as the unprotected (i.e. without scram) loss-of-flow and transient overpower events, a large number of interrelated physical phenomena occur during a relatively short time. These phenomena include transient heat transfer and hydrodynamic events, coolant boiling, and fuel and cladding melting and relocation. Due to strong neutronic feedbacks these events can significantly influence the reactor power history in the accident progression. The paper presents the results of a recent SAS4A simulation of the M7 TREAT experiment. 6 refs., 5 figs

  1. Sas-4 proteins are required during basal body duplication in Paramecium

    Science.gov (United States)

    Gogendeau, Delphine; Hurbain, Ilse; Raposo, Graca; Cohen, Jean; Koll, France; Basto, Renata

    2011-01-01

    Centrioles and basal bodies are structurally related organelles composed of nine microtubule (MT) triplets. Studies performed in Caenorhabditis elegans embryos have shown that centriole duplication takes place in sequential way, in which different proteins are recruited in a specific order to assemble a procentriole. ZYG-1 initiates centriole duplication by triggering the recruitment of a complex of SAS-5 and SAS-6, which then recruits the final player, SAS-4, to allow the incorporation of MT singlets. It is thought that a similar mechanism (that also involves additional proteins) is present in other animal cells, but it remains to be investigated whether the same players and their ascribed functions are conserved during basal body duplication in cells that exclusively contain basal bodies. To investigate this question, we have used the multiciliated protist Paramecium tetraurelia. Here we show that in the absence of PtSas4, two types of defects in basal body duplication can be identified. In the majority of cases, the germinative disk and cartwheel, the first structures assembled during duplication, are not detected. In addition, if daughter basal bodies were formed, they invariably had defects in MT recruitment. Our results suggest that PtSas4 has a broader function than its animal orthologues. PMID:21289083

  2. A SAS2H/KENO-V Methodology for 3D Full Core depletion analysis

    International Nuclear Information System (INIS)

    Milosevic, M.; Greenspan, E.; Vujic, J.; Petrovic, B.

    2003-04-01

    This paper describes the use of a SAS2H/KENO-V methodology for 3D full core depletion analysis and illustrates its capabilities by applying it to burnup analysis of the IRIS core benchmarks. This new SAS2H/KENO-V sequence combines a 3D Monte Carlo full core calculation of node power distribution and a 1D Wigner-Seitz equivalent cell transport method for independent depletion calculation of each of the nodes. This approach reduces by more than an order of magnitude the time required for getting comparable results using the MOCUP code system. The SAS2H/KENO-V results for the asymmetric IRIS core benchmark are in good agreement with the results of the ALPHA/PHOENIX/ANC code system. (author)

  3. A new package: MySAS for small angle scattering data analysis

    International Nuclear Information System (INIS)

    Huang Chaoqiang; Xia Qingzhong; Yan Guanyun; Sun Guang'ai; Chen Bo

    2010-01-01

    In this paper, A MySAS package, which is verified on Windows XP, can easily convert two-dimensional data in small angle neutron and X-ray scattering analysis, operate individually and execute one particular operation as numerical data reduction or analysis, and graphical visualization. This MySAS package can implement the input and output routines via scanning certain properties, thus recalling completely sets of repetition input and selecting the input files. On starting from the two-dimensional files, the MySAS package can correct the anisotropic or isotropic data for physical interpretation and select the relevant pixels. Over 50 model functions are fitted by the POWELL code using χ 2 as the figure of merit function. (authors)

  4. Adaptation of XMM-Newton SAS to GRID and VO architectures via web

    Science.gov (United States)

    Ibarra, A.; de La Calle, I.; Gabriel, C.; Salgado, J.; Osuna, P.

    2008-10-01

    The XMM-Newton Scientific Analysis Software (SAS) is a robust software that has allowed users to produce good scientific results since the beginning of the mission. This has been possible given the SAS capability to evolve with the advent of new technologies and adapt to the needs of the scientific community. The prototype of the Remote Interface for Science Analysis (RISA) presented here, is one such example, which provides remote analysis of XMM-Newton data with access to all the existing SAS functionality, while making use of GRID computing technology. This new technology has recently emerged within the astrophysical community to tackle the ever lasting problem of computer power for the reduction of large amounts of data.

  5. Effect of hyperbaric oxygen therapy on SAS and SDS in children with ischemic encephalopathy

    Directory of Open Access Journals (Sweden)

    Pei-Yun Li

    2017-08-01

    Full Text Available Objective: To study and analyze the effect of early psychological intervention on the scores of SAS and SDS in children with hypoxic-ischemic encephalopathy undergoing hyperbaric oxygen therapy. Methods: A total of 64 children with hypoxic - ischemic encephalopathy enrolled in our hospital from July 2015 to July 2016 and their parents were selected as study subjects. The patients were treated with hyperbaric oxygen therapy, while their parents were given early psychological intervention. By the way of increasing parents’ awareness of the disease, helping parents build confidence in their children’s treatment and encouraging them to participate in daily training for their children to relieve their anxiety and depression. The parents' knowledge of the disease before and during treatment, the treatment of hyperbaric oxygen therapy and the change of SAS and SDS were observed. Results: After effective intervention, the scores of SAS and SDS of 64 patients’ parents were significantly lower than those before treatment. After 1 courses of intervention, the score of SAS was (43.36 ± 1.27 points, and the score of SDS was (45.22 ± 8.13 points. After 2 courses of intervention, the score of SAS was (41.07 ± 1.21 and the score of SDS was (42.35 ± 7.44 points, and parents' awareness of hypoxic-ischemic encephalopathy was significantly increased, and the differences between the two groups were statistically significant. Conclusion: Early psychological intervention on parents of children with hypoxic-ischemic encephalopathy can effectively improve the awareness of parents on the disease, so as to improve their acceptance of hyperbaric oxygen therapy; significantly reduce the parents’ SAS, SDS score. It is beneficial to build a good doctor-patient and nurse-patient relationship, improve the treatment effect and shorten the treatment time.

  6. Analysis of the OPERA-15 two-dimensional voiding experiment using the SAS4A code

    International Nuclear Information System (INIS)

    Briggs, L.L.

    1984-01-01

    Overall, SAS4A appears to do a good job for simulating the OPERA-15 experiment. For most of the experiment parameters, the code calculations compare quite well with the experimental data. The lack of a multi-dimensional voiding model has the effect of extending the flow coastdown time until voiding starts; otherwise, the code simulates the accident progression satisfactorily. These results indicate a need for further work in this area in the form of a tandem analysis by a two-dimensional flow code and a one-dimensional version of that code to confirm the observations derived from the SAS4A analysis

  7. A SAS-macro for estimation of the cumulative incidence using Poisson regression

    DEFF Research Database (Denmark)

    Waltoft, Berit Lindum

    2009-01-01

    the hazard rates, and the hazard rates are often estimated by the Cox regression. This procedure may not be suitable for large studies due to limited computer resources. Instead one uses Poisson regression, which approximates the Cox regression. Rosthøj et al. presented a SAS-macro for the estimation...... of the cumulative incidences based on the Cox regression. I present the functional form of the probabilities and variances when using piecewise constant hazard rates and a SAS-macro for the estimation using Poisson regression. The use of the macro is demonstrated through examples and compared to the macro presented...

  8. Encadrement des produits et des procédés : réglementation et normalisation du commerce international

    Directory of Open Access Journals (Sweden)

    Morin Odile

    2003-07-01

    Full Text Available Produits et procédés sont encadrés à la fois par des réglementations et, à un autre niveau, par des normes du commerce international. Cette présentation traite des textes réglementaires au niveau communautaire et national. On rappellera que l’entrée en vigueur d’un règlement européen est suivie d’une transposition dans le droit de chaque pays membre et que la réglementation nationale s’applique en l’absence de dispositions communautaires. En matière de commerce international, seront évoquées les actions de normalisation du Conseil Oléicole International (COI pour les huiles d’olive et de grignons d’olive et celles du Codex Alimentarius pour les huiles et graisses comestibles. L’ensemble des dispositions réglementaires constitue un cadre englobant les productions de l’amont vers l’aval, à la fois sur un plan vertical (oléagineux, huiles et corps gras, huiles d’olive, margarines, procédés de raffinage et transversalement (composés organiques volatils, OGM, solvants d’extraction, additifs, contaminants…. Le cas de l’huile d’olive est particulier en ce qu’il bénéficie d’un encadrement au niveau international (normes commerciales COI et Codex Alimentarius, européen et national (réglementation. Le Codex Alimentarius, quant à lui, établit des normes à caractère vertical (huiles végétales, graisses animales, huiles d’olive, matières grasses tartinables… et horizontal (additifs, résidus de pesticides…. L’essentiel de cet encadrement est résumé dans les tableaux qui illustrent cette contribution.

  9. Mesures de procédure spéciales et respect des droits de l'homme
    Rapport général

    OpenAIRE

    John A.E. Vervaele

    2009-01-01

    Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables...

  10. Mesures de procédure spéciales et respect des droits de l'homme Rapport général

    OpenAIRE

    Vervaele, J.A.E.

    2009-01-01

    Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables...

  11. Melnās krāsas iespējas interjerā

    OpenAIRE

    Lapkovska, Ērika

    2016-01-01

    Diplomdarbā “Melnās krāsas iespējas interjerā”, analizējot pieejamo literatūru, tiek apskatīta melnās krāsas izpratne, nozīme un lietojums vēsturiskā skatījumā, kā arī melnās krāsas izmantojuma principi interjerā. Empīriskajā daļā tiek veikts salīdzinošais pētījums, analizējot dažādus kafejnīcu un bāru interjerus Latvijā un pasaulē, kuros ir melnās krāsas klātbūtne. Diplomdarba apjoms – 75 lpp., kurās iekļauts ievads, 4 nodaļas, 7 apakšnodaļas, literatūras saraksts ar 53 vienībām, 2 pielikum...

  12. Implementation of Surface Detector Option in SCALE SAS4 Shielding Module

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Emmett, M.B.; Tang, J.S.

    1999-01-01

    The Shielding Analysis Sequence No. 4 (SAS4) in the Standardized Cask Analysis and Licensing Evaluation System (SCALE) is designed to aid the novice user in the preparation of detailed three-dimensional models and radiation protection studies of transportation or storage packages containing spent fuel from a nuclear reactor facility. The underlying methodology in these analyses is the Monte Carlo particle-tracking approach as incorporated into the MORSE-SGC computer code. The use of these basic procedures is enhanced via the automatic generation of the biasing parameters in the SAS4 sequence, which dramatically increases the calculational efficiency of most standard shielding problems. Until recently the primary mechanism for dose estimates in SAS4 was the use of point detectors, which were effective for single-dose locations, but inefficient for quantification of dose-rate profiles. This paper describes the implementation of a new surface detector option for SAS4 with automatic discretization of the detector surface into multiple segments or subdetectors. Results from several sample problems are given and discussed

  13. Essentials of Excel, Excel VBA, SAS and Minitab for statistical and financial analyses

    CERN Document Server

    Lee, Cheng-Few; Chang, Jow-Ran; Tai, Tzu

    2016-01-01

    This introductory textbook for business statistics teaches statistical analysis and research methods via business case studies and financial data using Excel, MINITAB, and SAS. Every chapter in this textbook engages the reader with data of individual stock, stock indices, options, and futures. One studies and uses statistics to learn how to study, analyze, and understand a data set of particular interest. Some of the more popular statistical programs that have been developed to use statistical and computational methods to analyze data sets are SAS, SPSS, and MINITAB. Of those, we look at MINITAB and SAS in this textbook. One of the main reasons to use MINITAB is that it is the easiest to use among the popular statistical programs. We look at SAS because it is the leading statistical package used in industry. We also utilize the much less costly and ubiquitous Microsoft Excel to do statistical analysis, as the benefits of Excel have become widely recognized in the academic world and its analytical capabilities...

  14. Comparison of SAS3A and MELT-III predictions for a transient overpower hypothetical accident

    International Nuclear Information System (INIS)

    Wilburn, N.P.

    1976-01-01

    A comparison is made of the predictions of the two major codes SAS3A and MELT-III for the hypothetical unprotected transient overpower accident in the FFTF. The predictions of temperatures, fuel restructuring, fuel melting, reactivity feedbacks, and core power are compared

  15. PS3-21: Extracting Utilization Data from Clarity into VDW Using Oracle and SAS

    Science.gov (United States)

    Chimmula, Srivardhan

    2013-01-01

    Background/Aims The purpose of the presentation is to demonstrate how we use SAS and Oracle to load VDW_Utilization, VDW_DX, and VDW_PX tables from Clarity at the Kaiser Permanente Northern California (KPNC) Division of Research (DOR) site. Methods DOR uses the best of Oracle PL/ SQL and SAS capabilities in building Extract Transform and Load (ETL) processes. These processes extract patient encounter, diagnosis, and procedure data from Teradata-based Clarity. The data is then transformed to fit HMORN’s VDW definitions of the table. This data is then loaded into the Oracle-based VDW table on DOR’s research database and then finally a copy of the table is also created as a SAS dataset. Results DOR builds robust and efficient ETL processes that refresh VDW Utilization table on a monthly basis processing millions of records/observations. The ETL processes have the capability to identify daily changes in Clarity and update the VDW tables on a daily basis. Conclusions KPNC DOR combines the best of both Oracle and SAS worlds to build ETL processes that load the data into VDW Utilization tables efficiently.

  16. SAS2: Guide sur la recherche collaborative et l'engagement social

    International Development Research Centre (IDRC) Digital Library (Canada)

    À l'encontre de cette façon de voir, les SAS2 favorisent l'« ancrage social » et la ..... les organismes communautaires, les médias, les fondations philanthropiques, ...... Portez attention aux différences qui peuvent influencer la manière dont les ...

  17. Plasma Pro-C3 (N-terminal type III collagen propeptide) predicts fibrosis progression in patients with chronic hepatitis C

    DEFF Research Database (Denmark)

    Nielsen, Mette J.; Veidal, Sanne S.; Karsdal, Morten A.

    2015-01-01

    -year. Patients were stratified according to Ishak stages 2-4. Internal cross-validation was performed by bootstrap analysis. RESULTS: Pro-C3 levels were significantly higher in CHC patients in Ishak stage 4 compared to stage 2 (P P ... (stage 4) from mild fibrosis (stage 2/3) (AUC = 0.72, P P = 0.007) levels was observed between the groups of -1, 0, +1 and +2 change in Ishak stage at 12 months. Pro-C3 was significantly increased in group +1 (P = 0.030) and +2 (P = 0...

  18. The SAS4A/SASSYS-1 Safety Analysis Code System, Version 5

    Energy Technology Data Exchange (ETDEWEB)

    Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Brunett, A. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Sumner, T. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    The SAS4A/SASSYS-1 computer code is developed by Argonne National Laboratory for thermal, hydraulic, and neutronic analysis of power and flow transients in liquidmetal- cooled nuclear reactors (LMRs). SAS4A was developed to analyze severe core disruption accidents with coolant boiling and fuel melting and relocation, initiated by a very low probability coincidence of an accident precursor and failure of one or more safety systems. SASSYS-1, originally developed to address loss-of-decay-heat-removal accidents, has evolved into a tool for margin assessment in design basis accident (DBA) analysis and for consequence assessment in beyond-design-basis accident (BDBA) analysis. SAS4A contains detailed, mechanistic models of transient thermal, hydraulic, neutronic, and mechanical phenomena to describe the response of the reactor core, its coolant, fuel elements, and structural members to accident conditions. The core channel models in SAS4A provide the capability to analyze the initial phase of core disruptive accidents, through coolant heat-up and boiling, fuel element failure, and fuel melting and relocation. Originally developed to analyze oxide fuel clad with stainless steel, the models in SAS4A have been extended and specialized to metallic fuel with advanced alloy cladding. SASSYS-1 provides the capability to perform a detailed thermal/hydraulic simulation of the primary and secondary sodium coolant circuits and the balance-ofplant steam/water circuit. These sodium and steam circuit models include component models for heat exchangers, pumps, valves, turbines, and condensers, and thermal/hydraulic models of pipes and plena. SASSYS-1 also contains a plant protection and control system modeling capability, which provides digital representations of reactor, pump, and valve controllers and their response to input signal changes.

  19. Clinical SAS programming in India: A study of industry needs versus wants.

    Science.gov (United States)

    Ananthakrishnan, Nithiyanandhan

    2014-07-01

    The clinical SAS (www.sas.com) programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Two surveys were created in www.surveymonkey.com. https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Bar chart and pie chart used on data collect to show segmentation of data. In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

  20. Clinical SAS programming in India: A study of industry needs versus wants

    Directory of Open Access Journals (Sweden)

    Nithiyanandhan Ananthakrishnan

    2014-01-01

    Full Text Available Background: The clinical SAS (www.sas.com programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. Aim: This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Settings and Design: Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Materials and Methods: Two surveys were created in www.surveymonkey.com. Management: https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Statistical Analysis Used: Bar chart and pie chart used on data collect to show segmentation of data. Results and Conclusions: In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

  1. Confirmatory factor analysis and sample invariance of the Chinese version of Somatosensory Amplification Scale (ChSAS) among Chinese adolescents

    OpenAIRE

    Tam, B. K.; Wong, W. S.

    2011-01-01

    Objective: This paper aimed to evaluate the factor structure of the Chinese version of Somatosensory Amplification Scale (ChSAS) in a sample of Chinese adolescents across different grade levels using confirmatory factor analysis (CFA). Methods: A total of 1991 Chinese adolescents completed the ChSAS. CFA assessed the fit of the one-factor model to the entire sample. Factorial invariance of the ChSAS was also examined across grade levels using multigroup CFA. Results: Results of CFA confirmed ...

  2. Ambiguities and completeness of SAS data analysis: investigations of apoferritin by SAXS/SANS EID and SEC-SAXS methods

    Science.gov (United States)

    Zabelskii, D. V.; Vlasov, A. V.; Ryzhykau, Yu L.; Murugova, T. N.; Brennich, M.; Soloviov, D. V.; Ivankov, O. I.; Borshchevskiy, V. I.; Mishin, A. V.; Rogachev, A. V.; Round, A.; Dencher, N. A.; Büldt, G.; Gordeliy, V. I.; Kuklin, A. I.

    2018-03-01

    The method of small angle scattering (SAS) is widely used in the field of biophysical research of proteins in aqueous solutions. Obtaining low-resolution structure of proteins is still a highly valuable method despite the advances in high-resolution methods such as X-ray diffraction, cryo-EM etc. SAS offers the unique possibility to obtain structural information under conditions close to those of functional assays, i.e. in solution, without different additives, in the mg/mL concentration range. SAS method has a long history, but there are still many uncertainties related to data treatment. We compared 1D SAS profiles of apoferritin obtained by X-ray diffraction (XRD) and SAS methods. It is shown that SAS curves for X-ray diffraction crystallographic structure of apoferritin differ more significantly than it might be expected due to the resolution of the SAS instrument. Extrapolation to infinite dilution (EID) method does not sufficiently exclude dimerization and oligomerization effects and therefore could not guarantee total absence of dimers account in the final SAS curve. In this study, we show that EID SAXS, EID SANS and SEC-SAXS methods give complementary results and when they are used all together, it allows obtaining the most accurate results and high confidence from SAS data analysis of proteins.

  3. Vybrané výběrové statistické metody v programu SAS

    OpenAIRE

    Voříšek, Jan

    2009-01-01

    In the present work we study methodology of different kinds of sample surveys and their design in SAS software. Creating of SAS Enterprise Guide Add-In was the fundamental creative part of this work. This Add-In enables to compute important statistics of sample surveys, without need of being familiar with SAS code. Add-In was created in MSFT Visual Studio 2003 in C # language using a tamplate for Add-Ins provided by SAS. This work contains a general description of the creation of an Add-In as...

  4. Coupling the System Analysis Module with SAS4A/SASSYS-1

    Energy Technology Data Exchange (ETDEWEB)

    Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format for PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly

  5. Coupled MCNP - SAS-SFR calculations for sodium fast reactor core at steady-state - 15460

    International Nuclear Information System (INIS)

    Ponomarev, A.; Travleev, A.; Pfrang, W.; Sanchez, V.

    2015-01-01

    The prediction of core parameters at steady state is the first step when studying core accident transient behaviour. At this step thermal hydraulics (TH) and core geometry parameters are calculated corresponding to initial operating conditions. In this study we present the coupling of the SAS-SFR code to the Monte-Carlo neutron transport code MCNP at steady state together with application to the European Sodium Fast Reactor (ESFR). The SAS-SFR code employs a multi-channel core representation where each channel represents subassemblies with similar power, thermal-hydraulics and pin mechanics conditions. For every axial node of every channel the individual geometry and material compositions parameters are calculated in accord with power and cooling conditions. This requires supplying the SAS-SFR-code with nodal power values which should be calculated by neutron physics code with given realistic core parameters. In the conventional approach the neutron physics model employs some core averaged TH and geometry data (fuel temperature, coolant density, core axial and radial expansion). In this study we organize a new approach coupling the MCNP neutron physics models and the SAS-SFR models, so that calculations of power can be improved by using distributed core parameters (TH and geometry) taken from SAS-SFR. The MCNP code is capable to describe cores with distributed TH parameters and even to model non-uniform axial expansion of fuel subassemblies. In this way, core TH and geometrical data calculated by SAS-SFR are taken into account accurately in the neutronics model. The coupling implementation is done by data exchange between two codes with help of processing routines managed by driver routine. Currently it is model-specific and realized for the ESFR 'Reference Oxide' core. The Beginning-Of-Life core state is considered with 10 channel representation for fuel subassemblies. For this model several sets of coupled calculations are performed, in which different

  6. Code portability and data management considerations in the SAS3D LMFBR accident-analysis code

    International Nuclear Information System (INIS)

    Dunn, F.E.

    1981-01-01

    The SAS3D code was produced from a predecessor in order to reduce or eliminate interrelated problems in the areas of code portability, the large size of the code, inflexibility in the use of memory and the size of cases that can be run, code maintenance, and running speed. Many conventional solutions, such as variable dimensioning, disk storage, virtual memory, and existing code-maintenance utilities were not feasible or did not help in this case. A new data management scheme was developed, coding standards and procedures were adopted, special machine-dependent routines were written, and a portable source code processing code was written. The resulting code is quite portable, quite flexible in the use of memory and the size of cases that can be run, much easier to maintain, and faster running. SAS3D is still a large, long running code that only runs well if sufficient main memory is available

  7. Fuel relocation modeling in the SAS4A accident analysis code system

    International Nuclear Information System (INIS)

    Tentner, A.M.; Miles, K.J.

    1985-01-01

    SAS4A is a new code system which has been designed for analyzing the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modeling the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel motion experiment analyses are also presented

  8. SPSS and SAS programs for comparing Pearson correlations and OLS regression coefficients.

    Science.gov (United States)

    Weaver, Bruce; Wuensch, Karl L

    2013-09-01

    Several procedures that use summary data to test hypotheses about Pearson correlations and ordinary least squares regression coefficients have been described in various books and articles. To our knowledge, however, no single resource describes all of the most common tests. Furthermore, many of these tests have not yet been implemented in popular statistical software packages such as SPSS and SAS. In this article, we describe all of the most common tests and provide SPSS and SAS programs to perform them. When they are applicable, our code also computes 100 × (1 - α)% confidence intervals corresponding to the tests. For testing hypotheses about independent regression coefficients, we demonstrate one method that uses summary data and another that uses raw data (i.e., Potthoff analysis). When the raw data are available, the latter method is preferred, because use of summary data entails some loss of precision due to rounding.

  9. Design and implementation of reliability evaluation of SAS hard disk based on RAID card

    Science.gov (United States)

    Ren, Shaohua; Han, Sen

    2015-10-01

    Because of the huge advantage of RAID technology in storage, it has been widely used. However, the question associated with this technology is that the hard disk based on the RAID card can not be queried by Operating System. Therefore how to read the self-information and log data of hard disk has been a problem, while this data is necessary for reliability test of hard disk. In traditional way, this information can be read just suitable for SATA hard disk, but not for SAS hard disk. In this paper, we provide a method by using LSI RAID card's Application Program Interface, communicating with RAID card and analyzing the feedback data to solve the problem. Then we will get the necessary information to assess the SAS hard disk.

  10. Fuel relocation modeling in the SAS4A accident analysis code system

    International Nuclear Information System (INIS)

    Tentner, A.M.; Miles, K.J.; Kalimullah; Hill, D.J.

    1986-01-01

    The SAS4A code system has been designed for the analysis of the initial phase of Hypothetical Core Disruptive Accidents (HCDAs) up to gross melting or failure of the subassembly walls. During such postulated accident scenarios as the Loss-of-Flow (LOF) and Transient-Overpower (TOP) events, the relocation of the fuel plays a key role in determining the sequence of events and the amount of energy produced before neutronic shutdown. This paper discusses the general strategy used in modelong the various phenomena which lead to fuel relocation and presents the key fuel relocation models used in SAS4A. The implications of these models for the whole-core accident analysis as well as recent results of fuel relocation are emphasized. 12 refs

  11. WinBUGSio: A SAS Macro for the Remote Execution of WinBUGS

    Directory of Open Access Journals (Sweden)

    Michael K. Smith

    2007-09-01

    Full Text Available This is a macro which facilitates remote execution of WinBUGS from within SAS. The macro pre-processes data for WinBUGS, writes the WinBUGS batch-script, executes this script and reads in output statistics from the WinBUGS log-file back into SAS native format. The user specifies the input and output file names and directory path as well as the statistics to be monitored in WinBUGS. The code works best for a model that has already been set up and checked for convergence diagnostics within WinBUGS. An obvious extension of the use of this macro is for running simulations where the input and output files all have the same name but all that differs between simulation iterations is the input dataset. The functionality and syntax of the macro call are described in this paper and illustrated using a simple linear regression model.

  12. Simple and flexible SAS and SPSS programs for analyzing lag-sequential categorical data.

    Science.gov (United States)

    O'Connor, B P

    1999-11-01

    This paper describes simple and flexible programs for analyzing lag-sequential categorical data, using SAS and SPSS. The programs read a stream of codes and produce a variety of lag-sequential statistics, including transitional frequencies, expected transitional frequencies, transitional probabilities, adjusted residuals, z values, Yule's Q values, likelihood ratio tests of stationarity across time and homogeneity across groups or segments, transformed kappas for unidirectional dependence, bidirectional dependence, parallel and nonparallel dominance, and significance levels based on both parametric and randomization tests.

  13. Pravděpodobnostní rozdělení v programu SAS

    OpenAIRE

    Rosypal, Martin

    2009-01-01

    The aim of this work is to elaborate the metodology of creation of custom add-ins for statistical application SAS Enterprise Guide and create one of these that would enable to simplify the calculation of quantiles, values of probability mass function (probability density function respectively) and cumulative distribution function and further based on user's specifications create an appropriate graph. In connection with content of this add-in, the presented work includes the recherche from bac...

  14. Development and application of the automated Monte Carlo biasing procedure in SAS4

    International Nuclear Information System (INIS)

    Tang, J.S.; Broadhead, B.L.

    1995-01-01

    An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. (author)

  15. Agent Based Model in SAS Environment for Rail Transit System Alignment Determination

    Directory of Open Access Journals (Sweden)

    I Made Indradjaja Brunner

    2018-04-01

    Full Text Available Transit system had been proposed for the urban area of Honolulu. One consideration to be determined is the alignment of the transit system. Decision to set the transit alignment will have influences on which areas will be served, who will be benefiting, as well as who will be impacted. Inputs for the decision usually conducted through public meetings, where community members are shown numbers of maps with pre-set routes. That approach could lead to a rather subjective decision by the community members. This paper attempts to discuss the utilization of grid map in determining the best alignment for rail transit system in Honolulu, Hawaii. It tries to use a more objective approach using various data derived from thematic maps. Overlaid maps are aggregated into a uniform 0.1-square mile vector based grid map system in GIS environment. The large dataset in the GIS environment is analyzed and manipulated using SAS software. The SAS procedure is applied to select the location of the alignment using a rational and deterministic approach. Grid cells that are superior compared to the others are selected based on several predefined criteria. Location of the dominant cells indicates possible transit alignment. The SAS procedure is designed to allow a transient vector called the GUIDE (Grid Unit with Intelligent Directional Expertise agent to analyze several cells at its vicinity and to move towards a cell with the highest value. Each time the agent landed on a cell, it left a mark. The chain of those marks shows location for the transit alignment. This study shows that the combination of ArcGIS and SAS allows a robust analysis of spatial data and manipulation of its datasets, which can be used to run a simulation mimicking the Agent-Based Modelling. This study also opens up further study possibilities by increasing number of factors analyzed by the agent, as well as creating a composite value of multi-factors.

  16. Interpretation of the CABRI LT1 test with SAS4A-code analysis

    International Nuclear Information System (INIS)

    Sato, Ikken; Onoda, Yu-uichi

    2001-03-01

    In the CABRI-FAST LT1 test, simulating a ULOF (Unprotected Loss of Flow) accident of LMFBR, pin failure took place rather early during the transient. No fuel melting is expected at this failure because the energy injection was too low and a rapid gas-release-like response leading to coolant-channel voiding was observed. This channel voiding was followed by a gradual fuel breakup and axial relocation. With an aid of SAS4A analysis, interpretation of this test was performed. Although the original SAS4A model was not well fitted to this type of early pin failure, the global behavior after the pin failure was reasonably simulated with temporary modifications. Through this study, gas release behavior from the failed fuel pin and its effect on further transient were well understood. It was also demonstrated that the SAS4A code has a potential to simulate the post-failure behavior initiated by a very early pin failure provided that necessary model modification is given. (author)

  17. Living Together v. Living Well Together: A Normative Examination of the SAS Case

    Directory of Open Access Journals (Sweden)

    Lori G. Beaman

    2016-04-01

    Full Text Available The European Court of Human Rights decision in SAS from France illustrates how a policy and national mantra that ostensibly aims to enhance inclusiveness, ‘living together’, is legally deployed in a manner that may have the opposite effect. In essence, despite acknowledging the sincerity of SAS’s religious practice of wearing the niqab, and her agency in making the decision to do so, the Court focuses on radicalism and women’s oppression amongst Muslims. Taking the notion of living together as the beginning point, the paper explores the normative assumptions underlying this notion as illustrated in the judgment of the Court. An alternative approach, drawing on the work of Derrida for the notion of ‘living well together’ will be proposed and its implications for social inclusion explicated. The paper’s aim is to move beyond the specific example of SAS and France to argue that the SAS pattern of identifying particular values as ‘national values’, the deployment of those values through law, policy and public discourse, and their exclusionary effects is playing out in a number of Western democracies, including Canada, the country with which the author is most familiar. Because of this widespread dissemination of values and their framing as representative of who ‘we’ are, there is a pressing need to consider the potentially alienating effects of a specific manifestation of ‘living together’ and an alternative model of ‘living well together’.

  18. Modeling developments for the SAS4A and SASSYS computer codes

    International Nuclear Information System (INIS)

    Cahalan, J.E.; Wei, T.Y.C.

    1990-01-01

    The SAS4A and SASSYS computer codes are being developed at Argonne National Laboratory for transient analysis of liquid metal cooled reactors. The SAS4A code is designed to analyse severe loss-of-coolant flow and overpower accidents involving coolant boiling, Cladding failures, and fuel melting and relocation. Recent SAS4A modeling developments include extension of the coolant boiling model to treat sudden fission gas release upon pin failure, expansion of the DEFORM fuel behavior model to handle advanced cladding materials and metallic fuel, and addition of metallic fuel modeling capability to the PINACLE and LEVITATE fuel relocation models. The SASSYS code is intended for the analysis of operational and beyond-design-basis transients, and provides a detailed transient thermal and hydraulic simulation of the core, the primary and secondary coolant circuits, and the balance-of-plant, in addition to a detailed model of the plant control and protection systems. Recent SASSYS modeling developments have resulted in detailed representations of the balance of plant piping network and components, including steam generators, feedwater heaters and pumps, and the turbine. 12 refs., 2 tabs

  19. Adaptation and Validation of the Sexual Assertiveness Scale (SAS) in a Sample of Male Drug Users.

    Science.gov (United States)

    Vallejo-Medina, Pablo; Sierra, Juan Carlos

    2015-04-21

    The aim of the present study was to adapt and validate the Sexual Assertiveness Scale (SAS) in a sample of male drug users. A sample of 326 male drug users and 322 non-clinical males was selected by cluster sampling and convenience sampling, respectively. Results showed that the scale had good psychometric properties and adequate internal consistency reliability (Initiation = .66, Refusal = .74 and STD-P = .79). An evaluation of the invariance showed strong factor equivalence between both samples. A high and moderate effect of Differential Item Functioning was only found in items 1 and 14 (∆R 2 Nagelkerke = .076 and .037, respectively). We strongly recommend not using item 1 if the goal is to compare the scores of both groups, otherwise the comparison will be biased. Correlations obtained between the CSFQ-14 and the safe sex ratio and the SAS subscales were significant (CI = 95%) and indicated good concurrent validity. Scores of male drug users were similar to those of non-clinical males. Therefore, the adaptation of the SAS to drug users provides enough guarantees for reliable and valid use in both clinical practice and research, although care should be taken with item 1.

  20. The Spectrum Analysis Solution (SAS) System: Theoretical Analysis, Hardware Design and Implementation.

    Science.gov (United States)

    Narayanan, Ram M; Pooler, Richard K; Martone, Anthony F; Gallagher, Kyle A; Sherbondy, Kelly D

    2018-02-22

    This paper describes a multichannel super-heterodyne signal analyzer, called the Spectrum Analysis Solution (SAS), which performs multi-purpose spectrum sensing to support spectrally adaptive and cognitive radar applications. The SAS operates from ultrahigh frequency (UHF) to the S-band and features a wideband channel with eight narrowband channels. The wideband channel acts as a monitoring channel that can be used to tune the instantaneous band of the narrowband channels to areas of interest in the spectrum. The data collected from the SAS has been utilized to develop spectrum sensing algorithms for the budding field of spectrum sharing (SS) radar. Bandwidth (BW), average total power, percent occupancy (PO), signal-to-interference-plus-noise ratio (SINR), and power spectral entropy (PSE) have been examined as metrics for the characterization of the spectrum. These metrics are utilized to determine a contiguous optimal sub-band (OSB) for a SS radar transmission in a given spectrum for different modalities. Three OSB algorithms are presented and evaluated: the spectrum sensing multi objective (SS-MO), the spectrum sensing with brute force PSE (SS-BFE), and the spectrum sensing multi-objective with brute force PSE (SS-MO-BFE).

  1. Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

    International Nuclear Information System (INIS)

    Tveten, U.

    1997-02-01

    The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations

  2. Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994

    Energy Technology Data Exchange (ETDEWEB)

    Tveten, U.

    1997-02-01

    The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the Scandinavian Airline System (SAS). The results presented in this report (radiation doserates for the different types of aircraft in the different years) will, in a later stage of the project, be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for this work is the collection of old SAS time tables found in the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Associations.

  3. Embedding SAS approach into conjugate gradient algorithms for asymmetric 3D elasticity problems

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Hsin-Chu; Warsi, N.A. [Clark Atlanta Univ., GA (United States); Sameh, A. [Univ. of Minnesota, Minneapolis, MN (United States)

    1996-12-31

    In this paper, we present two strategies to embed the SAS (symmetric-and-antisymmetric) scheme into conjugate gradient (CG) algorithms to make solving 3D elasticity problems, with or without global reflexive symmetry, more efficient. The SAS approach is physically a domain decomposition scheme that takes advantage of reflexive symmetry of discretized physical problems, and algebraically a matrix transformation method that exploits special reflexivity properties of the matrix resulting from discretization. In addition to offering large-grain parallelism, which is valuable in a multiprocessing environment, the SAS scheme also has the potential for reducing arithmetic operations in the numerical solution of a reasonably wide class of scientific and engineering problems. This approach can be applied directly to problems that have global reflexive symmetry, yielding smaller and independent subproblems to solve, or indirectly to problems with partial symmetry, resulting in loosely coupled subproblems. The decomposition is achieved by separating the reflexive subspace from the antireflexive one, possessed by a special class of matrices A, A {element_of} C{sup n x n} that satisfy the relation A = PAP where P is a reflection matrix (symmetric signed permutation matrix).

  4. Mesures de procédure spéciales et respect des droits de l'homme
    Rapport général

    Directory of Open Access Journals (Sweden)

    John A.E. Vervaele

    2009-10-01

    Full Text Available Le but du rapport général est de mener une analyse comparative des rapports nationaux en vue de présenter les processus de transformation des systèmes de justice pénale internes, en particulier du procès pénal, étant donné que des mesures procédurales spéciales sont introduites pour appréhender le terrorisme et la criminalité organisée, et de voir si cela a conduit les pays à se départir de leur propres règles fondamentales, procédures, principes et standards des droits de l’homme applicables. Partant de la prémisse qu’un système intégré de droit pénal a trois dimensions – la protection des individus (la dimension de bouclier, la mise à disposition d’instruments d’application de la loi (la dimension d’épée et les contrôles et équilibres c’est-à-dire la séparation des pouvoirs (la dimension constitutionnelle – le rapport fournit un aperçu d’ensemble des transformations corrélées, surtout dans la procédure d’enquête préliminaire, qui les ont affectées toutes les trois dans trois vagues de « guerre » (contre la drogue, le crime organisé et le terrorisme. Dans beaucoup de pays, les garanties procédurales et les principes qui protègent contre la violation du droit à un procès équitable sont considérés comme un fardeau du point de vue de l’efficacité de l’application de la loi à la criminalité grave. Ces réformes se sont traduites par une claire extension de l’état répressif et un estompement des distinctions classiques, et ne favorisent pas la primauté du droit. La focalisation sur la sécurité publique et les investigations contraignantes préventives sapent le système de justice pénale. Avec l’usage croissant du système de justice criminelle comme instrument de régulation du présent et/ou de l’avenir plutôt que de sanction d’un comportement passé, et un procès pénal dans lequel l’enquête préliminaire ne concerne pas la recherche de la v

  5. PREFACE Proceedings of the XIV International Conference on Small-Angle Scattering, SAS-2009

    Science.gov (United States)

    King, Stephen; Terrill, Nicholas

    2010-10-01

    The XIV International Conference on Small-Angle Scattering, SAS-2009, was held in Oxford UK, 13-18 September 2009, and was jointly organised under the auspices of the International Union of Crystallography Commission on SAS by a team from the Diamond Light Source and the ISIS Pulsed Neutron Source - their first such joint venture - with help from the UK Science and Technology Facilities Council. It was the first time that this long running and successful series of conferences on the application, science and technology of small-angle scattering techniques had been staged in the UK. The UK has a proud heritage in small-angle scattering: as home to one of the world's first SANS instruments (at AERE Harwell), as the site of the world's first 2nd generation X-ray Synchrotron (the SRS at Daresbury with its suite of SAXS beamlines), and latterly as the location of the world's most successful pulsed source SANS instrument. Indeed, 2009 also marked the 25th Anniversary of neutron operations at ISIS and the opening of a Second Target Station. Whilst the SRS ceased operations in 2008, its mantle has been inherited by the Diamond synchrotron. Many delegates took the opportunity to visit both Diamond and ISIS during a conference excursion. Despite the prevailing global economic downturn, we were delighted that 434 delegates from 32 different countries were able to attend SAS-2009; two-thirds were drawn from the UK, Germany, Japan, the USA and France, but there were also sizeable contingents from Australia, Korea, Taiwan and South America. In many ways this geographical spread reflects the present and emerging distribution, respectively, of 3rd generation X-ray synchrotrons and high-flux neutron sources, although the scope of the conference was not solely limited to these probes. Financial support from the IUCr enabled us to grant bursaries to attend SAS-2009 to 12 delegates from emerging countries (Algeria, Argentina, Brazil, India, Nepal, Romania, Russia and the Ukraine). The

  6. Aprenentatge cooperatiu interdisciplinari i rúbriques per a la millora del procés d'ensenyament-aprenentatge

    Directory of Open Access Journals (Sweden)

    Beatriz Corchuelo Martínez-Azúa

    2016-06-01

    Full Text Available L'adaptació dels títols a l'Espai Europeu d'Educació Superior (EEES suposa l'ocasió de millorar l'educació integral dels alumnes, orientant les accions docents cap al desenvolupament de competències. L'adquisició de competències exigeix la incorporació de metodologies docents actives que permetin la generació enfront de la mera transmissió de coneixements. Així mateix, nombrosos estudis adverteixen de l'escassa transferència existent en els coneixements tractats en les assignatures quan es consideren de manera individual. El treball interdisciplinari constitueix una valuosa eina perquè els estudiants facin connexions, plantegin i trobin respostes a situacions problemàtiques i ajustin el seu aprenentatge a un coneixement integral. Pel que s'ha vist la necessitat de desenvolupar, en el currículum formatiu de l'alumne, aproximacions interdisciplinàries.Tenint en compte aquests aspectes, s'ha realitzat una experiència d'innovació docent universitària de caràcter interdisciplinari en la qual s'integren els continguts i competències de diverses assignatures per abordar el procés de solució de problemes econòmics. S'ha treballat la interdisciplinaritat amb tècniques d'aprenentatge cooperatiu. La interacció d’aquests aspectes és la raó por la quual hem denominat a l'experiència “Aprenentatge Cooperatiu Interdisciplinari” (ACI. L'avaluació de l'aprenentatge es realitza de forma individual, (mitjançant heteroevaluació i coevaluació, i grupal, (mitjançant rúbriques i coevaluació.Els resultats mostren diversos aspectes: 1 La metodologia ACI no solament permet formar en continguts sinó també en competències. 2 La interconnexió entre assignatures ha permès que els alumnes ajuste n els seus aprenentatges cap a un coneixement més integral. 3 La unió de les diferents innovacions docents ha repercutit positivament en la motivació de l'alumnat. 4 S'han assolit resultats d'aprenentatge positius en l'alumnat, majors

  7. Les procès contre le sanctuaire Yasukuni The trials of WW2 veterans’ families against the Yasukuni shrine

    Directory of Open Access Journals (Sweden)

    Nobumasa Tanaka

    2010-07-01

    Full Text Available Le sanctuaire Yasukuni a été fondé à Tôkyô en 1869 par l’empereur Meiji pour célébrer la mémoire des guerriers japonais tombés au combat pour l’empereur et la patrie. Etablissement religieux chargé d’honorer les hauts faits de ces « âmes héroïques », il fut longtemps le symbole du militarisme japonais. Or, parmi les familles qui ont perdu l’un des leurs au cours de la guerre d’agression menée par le Japon en Asie, certaines ont engagé des poursuites contre l’administration du Yasukuni, afin d’obtenir que les noms de leurs proches soient radiés des listes du sanctuaire. Cet article retrace l’historique des procès engagés par ces familles, en examinant au passage les plaintes déposées contre le caractère anticonstitutionnel des visites répétées du Premier ministre Koizumi au Yasukuni.The Yasukuni shrine was founded in Tokyo in 1868 by the Emperor Meiji to celebrate the memory of Japanese warriors fallen during battles for the Emperor and the country. As religious institution devoted to honor these “brave souls”, it became the symbol of Japanese militarism. However, among the families who lost relatives during the war, some have sued the administration of Yasukuni to get the names of their relatives deleted from the lists of the shrine. This article describes the genesis of those trials and exams also the anti-constitutional nature of the repeated visits of Prime Minister Koizumi to Yasukuni.

  8. Determining hyporheic storage using the rSAS model in urban restored streams.

    Science.gov (United States)

    Stoll, E.; Putnam, S. M.; Cosans, C.; Harman, C. J.

    2017-12-01

    One aim of stream restoration is to increase the connectivity of the stream with the hyporheic zone, which is important for processes like denitrification. This study analyzed transects of different restoration techniques in an urban stream, Stony Run in Baltimore, Maryland. The extent of the hyporheic zone was determined using a combination of salt slug injection tracer studies to determine the breakthrough curves and the rank StorAge Selection (rSAS) model. Previous studies using salt tracer injections have often focused on the shape of the breakthrough curve and the transit time distributions of streams to infer indicies correlated with hyporheic zone storage. This study uses the rSAS model to determine the volume of storage that must be turning over to produce the breakthrough curve. This study looked at transects of two different restoration techniques, one with floodplain rehabilitation and one without. Both transects had cross vanes and pool and riffle systems and only differed in the steepness of the banks surrounding the stream. The utility and accuracy of rSAS method was found to be heavily dependent on accurate flow rates. To avoid potential skew in the results, normalized, relatively flow rate-independent metric of storage were compared among transects to reduce error resulting from the flow rate. The results suggested that stream water was retained for longer in a larger storage volume in the transect that did not have floodplain rehabilitation. When compared to the storage of a natural stream with similar geomorphologic characteristics, the restored transect without floodplain rehabilitation had a larger storage volume than the natural stream. The restored transect with floodplain rehabilitation not only had a smaller storage volume than the restored section without rehabilitation, but also had a smaller storage volume than the natural stream with similar bank slopes. This suggests that the floodplain restoration does not significantly contribute to

  9. Handling missing data in cluster randomized trials: A demonstration of multiple imputation with PAN through SAS

    Directory of Open Access Journals (Sweden)

    Jiangxiu Zhou

    2014-09-01

    Full Text Available The purpose of this study is to demonstrate a way of dealing with missing data in clustered randomized trials by doing multiple imputation (MI with the PAN package in R through SAS. The procedure for doing MI with PAN through SAS is demonstrated in detail in order for researchers to be able to use this procedure with their own data. An illustration of the technique with empirical data was also included. In this illustration thePAN results were compared with pairwise deletion and three types of MI: (1 Normal Model (NM-MI ignoring the cluster structure; (2 NM-MI with dummy-coded cluster variables (fixed cluster structure; and (3 a hybrid NM-MI which imputes half the time ignoring the cluster structure, and the other half including the dummy-coded cluster variables. The empirical analysis showed that using PAN and the other strategies produced comparable parameter estimates. However, the dummy-coded MI overestimated the intraclass correlation, whereas MI ignoring the cluster structure and the hybrid MI underestimated the intraclass correlation. When compared with PAN, the p-value and standard error for the treatment effect were higher with dummy-coded MI, and lower with MI ignoring the clusterstructure, the hybrid MI approach, and pairwise deletion. Previous studies have shown that NM-MI is not appropriate for handling missing data in clustered randomized trials. This approach, in addition to the pairwise deletion approach, leads to a biased intraclass correlation and faultystatistical conclusions. Imputation in clustered randomized trials should be performed with PAN. We have demonstrated an easy way for using PAN through SAS.

  10. DIMG92 : un simulateur de formation pour le procédé DIMERSOL Dimg92: a Training Simulator for the Dimersol Process

    OpenAIRE

    Nica A.; Capelle M.; Galtier F.

    2006-01-01

    DIMG92 est un simulateur de formation sur le procédé pétrochimique DIMERSOL (procédé IFP de dimérisation du propylène). En simulant le réacteur et ses équipements annexes, les opérateurs s'exercent à conduire l'unité et comprennent les effets des divers paramètres à prendre en compte. Le simulateur est composé de deux logiciels : - Un logiciel de modélisation, basé sur la représentation mathématique de connaissances physico-chimiques et physiques. Aucun empirisme n'est utilisé dans le modèle....

  11. Plan empresa Publitis S.A.S: soluciones tecnológicas

    OpenAIRE

    Robledo Ceballos, Carlos Alberto; Rodríguez Velasco, Salvador

    2011-01-01

    RESUMEN: PubliTICs es una empresa de constitución privada creada bajo la reglamentación emitida para las Sociedades por Acciones Simplificadas, cuyo objeto principal es la prestación de servicios de Tecnologías de la Información y las Comunicaciones en el mercado de Colombia. PubliTICs S.A.S celebrará un contrato de Aliado Tecnológico y Comercial con las Empresas Municipales de Cali EMCALI EICE ESP, para prestar servicios de soluciones tecnológicas empresariales, aprovechando la infraestru...

  12. SAS3A analysis of natural convection boiling behavior in the Sodium Boiling Test Facility

    International Nuclear Information System (INIS)

    Klein, G.A.

    1979-01-01

    An analysis of natural convection boiling behavior in the Sodium Boiling Test (SBT) Facility has been performed using the SAS3A computer code. The predictions from this analysis indicate that stable boiling can be achieved for extensive periods of time for channel powers less than 1.4 kW and indicate intermittent dryout at higher powers up to at least 1.7 kW. The results of this anaysis are in reasonable agreement with the SBT Facility test results

  13. %lrasch_mml: A SAS Macro for Marginal Maximum Likelihood Estimation in Longitudinal Polytomous Rasch Models

    Directory of Open Access Journals (Sweden)

    Maja Olsbjerg

    2015-10-01

    Full Text Available Item response theory models are often applied when a number items are used to measure a unidimensional latent variable. Originally proposed and used within educational research, they are also used when focus is on physical functioning or psychological wellbeing. Modern applications often need more general models, typically models for multidimensional latent variables or longitudinal models for repeated measurements. This paper describes a SAS macro that fits two-dimensional polytomous Rasch models using a specification of the model that is sufficiently flexible to accommodate longitudinal Rasch models. The macro estimates item parameters using marginal maximum likelihood estimation. A graphical presentation of item characteristic curves is included.

  14. Plan de empresa DROP S.A.S. artículos y accesorios para mascotas

    OpenAIRE

    2012-01-01

    Este trabajo es un plan de empresa que determina la viabilidad del proyecto DROP S.A.S, que tiene como finalidad la producción y comercialización de artículos para mascotas. Para lograr este fin, se ha realizado el plan de mercadeo, plan de producción, plan de organización y plan financiero, al hacer un estudio detallado de cada uno de estos módulos Inicialmente se elaboró el plan de mercadeo, en el que se hizo un análisis de las fuerzas del entorno, dentro del cual, se encuentra el estud...

  15. SAS Macros for Calculation of Population Attributable Fraction in a Cohort Study Design

    Directory of Open Access Journals (Sweden)

    Maarit A. Laaksonen

    2011-08-01

    Full Text Available The population attributable fraction (PAF is a useful measure for quantifying the impact of exposure to certain risk factors on a particular outcome at the population level. Recently, new model-based methods for the estimation of PAF and its confidence interval for different types of outcomes in a cohort study design have been proposed. In this paper, we introduce SAS macros implementing these methods and illustrate their application with a data example on the impact of different risk factors on type 2 diabetes incidence.

  16. Adaptive Tests of Significance Using Permutations of Residuals with R and SAS

    CERN Document Server

    O'Gorman, Thomas W

    2012-01-01

    Provides the tools needed to successfully perform adaptive tests across a broad range of datasets Adaptive Tests of Significance Using Permutations of Residuals with R and SAS illustrates the power of adaptive tests and showcases their ability to adjust the testing method to suit a particular set of data. The book utilizes state-of-the-art software to demonstrate the practicality and benefits for data analysis in various fields of study. Beginning with an introduction, the book moves on to explore the underlying concepts of adaptive tests, including:Smoothing methods and normalizing transforma

  17. Nouveau procédé de précipitation pour la synthèse d’alumine

    OpenAIRE

    Lafficher , Robin

    2016-01-01

    Control of catalyst supports porosity is an important challenge for the refining industry. The aim of this thesis is to develop a new precipitation process in order to obtain γ-alumina supports exhibiting new textural properties compared with those prepared by the conventional boehmite precipitation route in stirred tank reactor. For that purpose, combined influences of precursor, mixing technology and micromixing time on the final product physical properties were studied.Three mixing technol...

  18. Cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context

    Directory of Open Access Journals (Sweden)

    Viviane Vedovato Silva-Rocha

    Full Text Available Abstract Objective To present the process of cross-cultural adaptation of the Sport Anxiety Scale-2 (SAS-2 for the Brazilian context. Method The following stages were used: translation into Brazilian Portuguese by independent translators, elaboration of a synthesis version, back-translation, evaluation by experts and pretest with target population. Results All the stages of cross-cultural adaptation were completed, and in the majority of items evaluated, good concordance between experts was obtained (≥ 80%. Suggested adjustments were compiled into the consensus version by the two authors, with the resulting material being considered adequate in the pretest (and thus no further changes were needed. Termed as “Escala de Ansiedade Esportiva-2,” the final version was considered by the main author of the original scale as an official version in Brazilian Portuguese. Conclusions In view of the fulfilment of all steps suggested for the cross-cultural adaptation process, the SAS-2 is now available in Brazilian Portuguese to be tested for its psychometric qualities.

  19. Enhancing the solubility and bioavailability of poorly water-soluble drugs using supercritical antisolvent (SAS) process.

    Science.gov (United States)

    Abuzar, Sharif Md; Hyun, Sang-Min; Kim, Jun-Hee; Park, Hee Jun; Kim, Min-Soo; Park, Jeong-Sook; Hwang, Sung-Joo

    2018-03-01

    Poor water solubility and poor bioavailability are problems with many pharmaceuticals. Increasing surface area by micronization is an effective strategy to overcome these problems, but conventional techniques often utilize solvents and harsh processing, which restricts their use. Newer, green technologies, such as supercritical fluid (SCF)-assisted particle formation, can produce solvent-free products under relatively mild conditions, offering many advantages over conventional methods. The antisolvent properties of the SCFs used for microparticle and nanoparticle formation have generated great interest in recent years, because the kinetics of the precipitation process and morphologies of the particles can be accurately controlled. The characteristics of the supercritical antisolvent (SAS) technique make it an ideal tool for enhancing the solubility and bioavailability of poorly water-soluble drugs. This review article focuses on SCFs and their properties, as well as the fundamentals of overcoming poorly water-soluble drug properties by micronization, crystal morphology control, and formation of composite solid dispersion nanoparticles with polymers and/or surfactants. This article also presents an overview of the main aspects of the SAS-assisted particle precipitation process, its mechanism, and parameters, as well as our own experiences, recent advances, and trends in development. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Development and validation of logistic prognostic models by predefined SAS-macros

    Directory of Open Access Journals (Sweden)

    Ziegler, Christoph

    2006-02-01

    Full Text Available In medical decision making about therapies or diagnostic procedures in the treatment of patients the prognoses of the course or of the magnitude of diseases plays a relevant role. Beside of the subjective attitude of the clinician mathematical models can help in providing such prognoses. Such models are mostly multivariate regression models. In the case of a dichotomous outcome the logistic model will be applied as the standard model. In this paper we will describe SAS-macros for the development of such a model, for examination of the prognostic performance, and for model validation. The rational for this developmental approach of a prognostic modelling and the description of the macros can only given briefly in this paper. Much more details are given in. These 14 SAS-macros are a tool for setting up the whole process of deriving a prognostic model. Especially the possibility of validating the model by a standardized software tool gives an opportunity, which is not used in general in published prognostic models. Therefore, this can help to develop new models with good prognostic performance for use in medical applications.

  1. Social Anxiety Scale for Adolescents (SAS-A: Psychometric properties in a Spanish-speaking population

    Directory of Open Access Journals (Sweden)

    José Olivares

    2005-01-01

    Full Text Available El objetivo de este estudio instrumental fue estudiar la estructura factorial y propiedades psicométricas de la Escala de Ansiedad Social para Adolescentes (SASA. Participaron 2407 adolescentes (1263 chicos y 1144 chicas, con una edad media de 15 años, alumnos de nueve institutos de la región de Murcia. Los resultados obtenidos apoyan la estructura tri-factorial propuesta por los autores de la escala (FNE, SAD-New, SAD-General. Se encontraron correlaciones interescalas significativas y niveles de consistencia interna elevados para las subescalas, así como respecto de los efectos del sexo en la puntuación SAS-A/Total y en sus subescalas, alcanzando las chicas las puntuaciones más elevadas. Sólo se hallaron diferencias significativas para la edad en la subescala FNE y no se constataron efectos de interacción entre los dos factores. Estos hallazgos parecen avalar el uso de la SAS-A en población adolescente de habla española.

  2. FY2017 Updates to the SAS4A/SASSYS-1 Safety Analysis Code

    Energy Technology Data Exchange (ETDEWEB)

    Fanning, T. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-09-30

    The SAS4A/SASSYS-1 safety analysis software is used to perform deterministic analysis of anticipated events as well as design-basis and beyond-design-basis accidents for advanced fast reactors. It plays a central role in the analysis of U.S. DOE conceptual designs, proposed test and demonstration reactors, and in domestic and international collaborations. This report summarizes the code development activities that have taken place during FY2017. Extensions to the void and cladding reactivity feedback models have been implemented, and Control System capabilities have been improved through a new virtual data acquisition system for plant state variables and an additional Block Signal for a variable lag compensator to represent reactivity feedback for novel shutdown devices. Current code development and maintenance needs are also summarized in three key areas: software quality assurance, modeling improvements, and maintenance of related tools. With ongoing support, SAS4A/SASSYS-1 can continue to fulfill its growing role in fast reactor safety analysis and help solidify DOE’s leadership role in fast reactor safety both domestically and in international collaborations.

  3. OECD benchmark a of MOX fueled PWR unit cells using SAS2H, triton and mocup

    International Nuclear Information System (INIS)

    Ganda, F.; Greenspan, A.

    2005-01-01

    Three code systems are tested by applying them to calculate the OECD PWR MOX unit cell benchmark A. The codes tested are the SAS2H code sequence of the SCALE5 code package using 44 group library, MOCUP (MCNP4C + ORIGEN2), and the new TRITON depletion sequence of SCALE5 using 238 group cross sections generated using CENTRM with continuous energy cross sections. The burnup-dependent k ∞ and actinides concentration calculated by all three code-systems were found to be in good agreement with the OECD benchmark average results. Limited results were calculated also with the WIMS-ANL code package. WIMS-ANL was found to significantly under-predict k ∞ as well as the concentration of Pu 242 , consistently with the predictions of the WIMS-LWR reported by two of the OECD benchmark participants. Additionally, SAS2H is benchmarked against MOCUP for a hydride fuel containing unit cell, giving very satisfactory agreement. (authors)

  4. A SAS2H/KENO-V methodology for 3D fuel burnup analysis

    International Nuclear Information System (INIS)

    Milosevic, M.; Greenspan, E.; Vujic, J.

    2002-01-01

    An efficient methodology for 3D fuel burnup analysis of LWR reactors is described in this paper. This methodology is founded on coupling Monte Carlo method for 3D calculation of node power distribution, and transport method for depletion calculation in ID Wigner-Seitz equivalent cell for each node independently. The proposed fuel burnup modeling, based on application of SCALE-4.4a control modules SAS2H and KENO-V.a is verified for the case of 2D x-y model of IRIS 15 x 15 fuel assembly (with reflective boundary condition) by using two well benchmarked code systems. The one is MOCUP, a coupled MCNP-4C and ORIGEN2.1 utility code, and the second is KENO-V.a/ORIGEN2.1 code system recently developed by authors of this paper. The proposed SAS2H/KENO-V.a methodology was applied for 3D burnup analysis of IRIS-1000 benchmark.44 core. Detailed k sub e sub f sub f and power density evolution with burnup are reported. (author)

  5. De novo centriole formation in human cells is error-prone and does not require SAS-6 self-assembly.

    Science.gov (United States)

    Wang, Won-Jing; Acehan, Devrim; Kao, Chien-Han; Jane, Wann-Neng; Uryu, Kunihiro; Tsou, Meng-Fu Bryan

    2015-11-26

    Vertebrate centrioles normally propagate through duplication, but in the absence of preexisting centrioles, de novo synthesis can occur. Consistently, centriole formation is thought to strictly rely on self-assembly, involving self-oligomerization of the centriolar protein SAS-6. Here, through reconstitution of de novo synthesis in human cells, we surprisingly found that normal looking centrioles capable of duplication and ciliation can arise in the absence of SAS-6 self-oligomerization. Moreover, whereas canonically duplicated centrioles always form correctly, de novo centrioles are prone to structural errors, even in the presence of SAS-6 self-oligomerization. These results indicate that centriole biogenesis does not strictly depend on SAS-6 self-assembly, and may require preexisting centrioles to ensure structural accuracy, fundamentally deviating from the current paradigm.

  6. Usual Dietary Intakes: SAS Macros for Estimating Ratios of Two Dietary Components that are Consumed Nearly Every Day

    Science.gov (United States)

    The following SAS macros can be used to create a bivariate distribution of usual intake of two dietary components that are consumed nearly every day and to calculate percentiles of the population distribution of the ratio of usual intakes.

  7. Overly long centrioles and defective cell division upon excess of the SAS-4-related protein CPAP.

    Science.gov (United States)

    Kohlmaier, Gregor; Loncarek, Jadranka; Meng, Xing; McEwen, Bruce F; Mogensen, Mette M; Spektor, Alexander; Dynlacht, Brian D; Khodjakov, Alexey; Gönczy, Pierre

    2009-06-23

    The centrosome is the principal microtubule organizing center (MTOC) of animal cells. Accurate centrosome duplication is fundamental for genome integrity and entails the formation of one procentriole next to each existing centriole, once per cell cycle. The procentriole then elongates to eventually reach the same size as the centriole. The mechanisms that govern elongation of the centriolar cylinder and their potential relevance for cell division are not known. Here, we show that the SAS-4-related protein CPAP is required for centrosome duplication in cycling human cells. Furthermore, we demonstrate that CPAP overexpression results in the formation of abnormally long centrioles. This also promotes formation of more than one procentriole in the vicinity of such overly long centrioles, eventually resulting in the presence of supernumerary MTOCs. This in turn leads to multipolar spindle assembly and cytokinesis defects. Overall, our findings suggest that centriole length must be carefully regulated to restrict procentriole number and thus ensure accurate cell division.

  8. Development and application of the automated Monte Carlo biasing procedure in SAS4

    International Nuclear Information System (INIS)

    Tang, J.S.; Broadhead, B.L.

    1993-01-01

    An automated approach for biasing Monte Carlo shielding calculations is described. In particular, adjoint fluxes from a one-dimensional discrete-ordinates calculation are used to generate biasing parameters for a three-dimensional Monte Carlo calculation. The automated procedure consisting of cross-section processing, adjoint flux determination, biasing parameter generation, and the initiation of a MORSE-SGC/S Monte Carlo calculation has been implemented in the SAS4 module of the SCALE computer code system. The automated procedure has been used extensively in the investigation of both computational and experimental benchmarks for the NEACRP working group on shielding assessment of transportation packages. The results of these studies indicate that with the automated biasing procedure, Monte Carlo shielding calculations of spent fuel casks can be easily performed with minimum effort and that accurate results can be obtained at reasonable computing cost. The systematic biasing approach described in this paper can also be applied to other similar shielding problems

  9. Computational procedures for probing interactions in OLS and logistic regression: SPSS and SAS implementations.

    Science.gov (United States)

    Hayes, Andrew F; Matthes, Jörg

    2009-08-01

    Researchers often hypothesize moderated effects, in which the effect of an independent variable on an outcome variable depends on the value of a moderator variable. Such an effect reveals itself statistically as an interaction between the independent and moderator variables in a model of the outcome variable. When an interaction is found, it is important to probe the interaction, for theories and hypotheses often predict not just interaction but a specific pattern of effects of the focal independent variable as a function of the moderator. This article describes the familiar pick-a-point approach and the much less familiar Johnson-Neyman technique for probing interactions in linear models and introduces macros for SPSS and SAS to simplify the computations and facilitate the probing of interactions in ordinary least squares and logistic regression. A script version of the SPSS macro is also available for users who prefer a point-and-click user interface rather than command syntax.

  10. [Calculating Pearson residual in logistic regressions: a comparison between SPSS and SAS].

    Science.gov (United States)

    Xu, Hao; Zhang, Tao; Li, Xiao-song; Liu, Yuan-yuan

    2015-01-01

    To compare the results of Pearson residual calculations in logistic regression models using SPSS and SAS. We reviewed Pearson residual calculation methods, and used two sets of data to test logistic models constructed by SPSS and STATA. One model contained a small number of covariates compared to the number of observed. The other contained a similar number of covariates as the number of observed. The two software packages produced similar Pearson residual estimates when the models contained a similar number of covariates as the number of observed, but the results differed when the number of observed was much greater than the number of covariates. The two software packages produce different results of Pearson residuals, especially when the models contain a small number of covariates. Further studies are warranted.

  11. GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

    Directory of Open Access Journals (Sweden)

    R. Bera

    2015-05-01

    Full Text Available To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI GéoSAS which is the SDI set up for researchers’ needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

  12. GéoSAS: A modular and interoperable Open Source Spatial Data Infrastructure for research

    Science.gov (United States)

    Bera, R.; Squividant, H.; Le Henaff, G.; Pichelin, P.; Ruiz, L.; Launay, J.; Vanhouteghem, J.; Aurousseau, P.; Cudennec, C.

    2015-05-01

    To-date, the commonest way to deal with geographical information and processes still appears to consume local resources, i.e. locally stored data processed on a local desktop or server. The maturity and subsequent growing use of OGC standards to exchange data on the World Wide Web, enhanced in Europe by the INSPIRE Directive, is bound to change the way people (and among them research scientists, especially in environmental sciences) make use of, and manage, spatial data. A clever use of OGC standards can help scientists to better store, share and use data, in particular for modelling. We propose a framework for online processing by making an intensive use of OGC standards. We illustrate it using the Spatial Data Infrastructure (SDI) GéoSAS which is the SDI set up for researchers' needs in our department. It is based on the existing open source, modular and interoperable Spatial Data Architecture geOrchestra.

  13. Technical support for a proposed decay heat guide using SAS2H/ORIGEN-S data

    International Nuclear Information System (INIS)

    Hermann, O.W.; Parks, C.V.; Renier, J.P.

    1994-09-01

    Major revisions are proposed to the current US Nuclear Regulatory Commission decay heat rate guide entitled ''Regulatory Guide 3.54, Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation,'' using a new data base produced by the SAS2H analysis sequence of the SCALE-4 system. The data base for the proposed guide revision has been significantly improved by increasing the number and range of parameters that generally characterize pressurized-water-reactor (PWR) and boiling-water-reactor (BWR) spent fuel assemblies. Using generic PWR and BWR assembly models, calculations were performed with each model for six different burnups at each of three separate specific powers to produce heat rates at 20 cooling times in the range of 1 to 110 y. The proposed procedure specifies proper interpolation formulae for the tabulated heat generation rates. Adjustment formulae for the interpolated values are provided to account for differences in initial 235 U enrichment and changes in the specific power of a cycle from the average value. Finally, safety factor formulae were derived as a function of burnup, cooling time, and type of reactor. The proposed guide revision was designed to be easier to use. Also, the complete data base and guide procedure is incorporated into an interactive code called LWRARC which can be executed on a personal computer. The report shows adequate comparisons of heat rates computed by SAS2H/ORIGEN-S and measurements for 10 BWR and 10 PWR fuel assemblies. The average differences of the computed minus the measured heat rates of fuel assemblies were -07 ± 2.6% for the BWR and 1.5 ± 1.3% for the PWR. In addition, a detailed analysis of the proposed procedure indicated the method and equations to be valid

  14. Procédé de l'étude de la rupture des fibres à partir d'un essai en ...

    African Journals Online (AJOL)

    Le travail consiste à solliciter en traction des mèches de fibres de verre, en utilisant l'émission acoustique pour suivre en temps réel l'endommagement du matériau. En effet, les ... Deux types d'essais doivent être réalisés, ceci afin de pouvoir comparer les méthodes et les résultats avec ceux déjà obtenus. La procédure ...

  15. Procés d’implantació de les HoloLens als boxes de reparació de SEAT, S.A.

    OpenAIRE

    Cano Almazán, Raquel

    2017-01-01

    Aquest treball de final de grau consisteix en la implantació d’una aplicació pertanyent a la Realitat Augmentada a la operativa de les auditories de manguetes del departament de Gestió de Qualitat de Motors i Triebsatz de l’empresa SEAT, S.A. L’aplicació que es vol aconseguir consisteix en un suport per l’auditor per realitzar correctament l’auditoria i per agilitzar el seu procés optimitzant els seus passos. El hardware que s’ha utilitzat per a poder dur a terme la aplicació en qüestió...

  16. SAS macro programs for geographically weighted generalized linear modeling with spatial point data: applications to health research.

    Science.gov (United States)

    Chen, Vivian Yi-Ju; Yang, Tse-Chuan

    2012-08-01

    An increasing interest in exploring spatial non-stationarity has generated several specialized analytic software programs; however, few of these programs can be integrated natively into a well-developed statistical environment such as SAS. We not only developed a set of SAS macro programs to fill this gap, but also expanded the geographically weighted generalized linear modeling (GWGLM) by integrating the strengths of SAS into the GWGLM framework. Three features distinguish our work. First, the macro programs of this study provide more kernel weighting functions than the existing programs. Second, with our codes the users are able to better specify the bandwidth selection process compared to the capabilities of existing programs. Third, the development of the macro programs is fully embedded in the SAS environment, providing great potential for future exploration of complicated spatially varying coefficient models in other disciplines. We provided three empirical examples to illustrate the use of the SAS macro programs and demonstrated the advantages explained above. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  17. Aging-Resistant Functionalized LDH⁻SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism.

    Science.gov (United States)

    Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui; Wang, Xin

    2018-05-18

    With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH⁻SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH⁻SAS composites. Successful preparation of LDH⁻SAS was confirmed by XRD, TGA and FTIR. LDH⁻SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH⁻SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance.

  18. Aging-Resistant Functionalized LDH–SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism

    Science.gov (United States)

    Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui

    2018-01-01

    With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH–SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH–SAS composites. Successful preparation of LDH–SAS was confirmed by XRD, TGA and FTIR. LDH–SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH–SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance. PMID:29783656

  19. A SAS macro for testing differences among three or more independent groups using Kruskal-Wallis and Nemenyi tests.

    Science.gov (United States)

    Liu, Yuewei; Chen, Weihong

    2012-02-01

    As a nonparametric method, the Kruskal-Wallis test is widely used to compare three or more independent groups when an ordinal or interval level of data is available, especially when the assumptions of analysis of variance (ANOVA) are not met. If the Kruskal-Wallis statistic is statistically significant, Nemenyi test is an alternative method for further pairwise multiple comparisons to locate the source of significance. Unfortunately, most popular statistical packages do not integrate the Nemenyi test, which is not easy to be calculated by hand. We described the theory and applications of the Kruskal-Wallis and Nemenyi tests, and presented a flexible SAS macro to implement the two tests. The SAS macro was demonstrated by two examples from our cohort study in occupational epidemiology. It provides a useful tool for SAS users to test the differences among three or more independent groups using a nonparametric method.

  20. Innovació en educació. De la idea a l’acció. Procés participatiu cap a l'INNED 2

    Directory of Open Access Journals (Sweden)

    Artur Parcerisa-Aran

    2011-06-01

    Full Text Available Per al progrés de l’educació, la innovació és indispensable. Aquest concepte, que es relaciona però no s’ha de confondre amb el de canvi, no tothom l’entén igual, i això fa que sigui necessari definir quines són les característiques que ha de tenir un procés perquè es pugui considerar una innovació educativa. A partir de la preocupació per ajudar a fer que les innovacions no es quedin només en idees sinó que esdevinguin realitats a les aules i en altres espais educatius, es va engegar un procés de trobades amb professorat i altres educadors i educadores per treballar sobre la innovació educativa de cara a l’organització del II Simposi d’Innovació Educativa (INNED 2. Un dels eixos que va suscitar més interès va ser el de la innovació metodològica. En la part final de l’article es recullen una sèrie de consideracions sobre alguns àmbits que cal considerar en aquesta innovació: la implicació de l’alumnat, l’organització de l’espai i el temps, l’avaluació per aprendre i l’atenció a la diversitat.

  1. Propiedades psicom??tricas de la versi??n espa??ola de la Sexual Assertiveness Scale (SAS)

    OpenAIRE

    Sierra Freire, Juan Carlos; Vallejo-Medina, Pablo; Santos-Iglesias, Pablo

    2011-01-01

    La asertividad sexual se refiere a la capacidad de las personas para iniciar la actividad sexual, rechazar la actividad sexual no deseada y emplear m??todos anticonceptivos, desarrollando comportamientos saluda- bles. La Sexual Assertiveness Scale (SAS) es una escala de 18 ??tems que eval??a tres dimensiones: Inicio, Rechazo y Prevenci??n Embarazo-ETS (E-ETS). En este estudio 853 personas contestaron la SAS, junto a una bater??a de ins- trumentos afines. La puntuaci??n media de los ??tems ha ...

  2. Identificación de Prácticas Empresariales para el Mejoramiento Continuo en Plusagro S.A.S.

    OpenAIRE

    Martín Correal, Alvaro Steven

    2014-01-01

    Este proyecto que se llevara a cabo en la compañía Plusagro S.A.S. la cual busca mejorar de forma sustancial la cultura organizacional de la compañía, para que desarrolle al máximo las ventajas competitivas que encuentra en el mercado, una de estas grandes ventajas es que al tener la exclusividad de su proveedor principal Kursan. Se vuelve de suma importancia saber que existen otras marcas en el mercado de los productos agrícolas que ofrece Plusagro S.A.S. pero se ha encontrado en común acuer...

  3. Analysis of the TREAT loss-of-flow tests L6 and L7 using SAS3D

    International Nuclear Information System (INIS)

    Morris, E.E.; Simms, R.; Gruber, E.E.

    1985-01-01

    The TREAT loss-of-flow tests L6 and L7 have been analyzed using the SAS3D accident analysis code. The impetus for the analysis was the need for experimentally supported fuel motion modeling in whole core accident studies performed in support of licensing of the Clinch River Breeder Reactor Project. The input prescription chosen for the SAS3D/SLUMPY fuel motion model gave reasonable agreement with the test results. Tests L6 and L7, each conducted with a cluster of three fuel pins, were planned to simulate key events in the loss-of-flow accident scenario for the Clinch River homogeneous reactor

  4. [Evaluation of the factorial and metric equivalence of the Sexual Assertiveness Scale (SAS) by sex].

    Science.gov (United States)

    Sierra, Juan Carlos; Santos-Iglesias, Pablo; Vallejo-Medina, Pablo

    2012-05-01

    Sexual assertiveness refers to the ability to initiate sexual activity, refuse unwanted sexual activity, and use contraceptive methods to avoid sexually transmitted diseases, developing healthy sexual behaviors. The Sexual Assertiveness Scale (SAS) assesses these three dimensions. The purpose of this study is to evaluate, using structural equation modeling and differential item functioning, the equivalence of the scale between men and women. Standard scores are also provided. A total of 4,034 participants from 21 Spanish provinces took part in the study. Quota sampling method was used. Results indicate a strict equivalent dimensionality of the Sexual Assertiveness Scale across sexes. One item was flagged by differential item functioning, although it does not affect the scale. Therefore, there is no significant bias in the scale when comparing across sexes. Standard scores show similar Initiation assertiveness scores for men and women, and higher scores on Refusal and Sexually Transmitted Disease Prevention for women. This scale can be used on men and women with sufficient psychometric guarantees.

  5. SASqPCR: robust and rapid analysis of RT-qPCR data in SAS.

    Directory of Open Access Journals (Sweden)

    Daijun Ling

    Full Text Available Reverse transcription quantitative real-time PCR (RT-qPCR is a key method for measurement of relative gene expression. Analysis of RT-qPCR data requires many iterative computations for data normalization and analytical optimization. Currently no computer program for RT-qPCR data analysis is suitable for analytical optimization and user-controllable customization based on data quality, experimental design as well as specific research aims. Here I introduce an all-in-one computer program, SASqPCR, for robust and rapid analysis of RT-qPCR data in SAS. This program has multiple macros for assessment of PCR efficiencies, validation of reference genes, optimization of data normalizers, normalization of confounding variations across samples, and statistical comparison of target gene expression in parallel samples. Users can simply change the macro variables to test various analytical strategies, optimize results and customize the analytical processes. In addition, it is highly automatic and functionally extendable. Thus users are the actual decision-makers controlling RT-qPCR data analyses. SASqPCR and its tutorial are freely available at http://code.google.com/p/sasqpcr/downloads/list.

  6. SPSS and SAS procedures for estimating indirect effects in simple mediation models.

    Science.gov (United States)

    Preacher, Kristopher J; Hayes, Andrew F

    2004-11-01

    Researchers often conduct mediation analysis in order to indirectly assess the effect of a proposed cause on some outcome through a proposed mediator. The utility of mediation analysis stems from its ability to go beyond the merely descriptive to a more functional understanding of the relationships among variables. A necessary component of mediation is a statistically and practically significant indirect effect. Although mediation hypotheses are frequently explored in psychological research, formal significance tests of indirect effects are rarely conducted. After a brief overview of mediation, we argue the importance of directly testing the significance of indirect effects and provide SPSS and SAS macros that facilitate estimation of the indirect effect with a normal theory approach and a bootstrap approach to obtaining confidence intervals, as well as the traditional approach advocated by Baron and Kenny (1986). We hope that this discussion and the macros will enhance the frequency of formal mediation tests in the psychology literature. Electronic copies of these macros may be downloaded from the Psychonomic Society's Web archive at www.psychonomic.org/archive/.

  7. Cosmic radiation and airline pilots. Exposure patterns of Norwegian pilots flying aircraft not used by SAS

    International Nuclear Information System (INIS)

    Tveten, U.

    1997-05-01

    The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots flying a great diversity of different aircrafts. Aircrafts that appear in the time-tables of the Scandinavian Airline System (SAS) have been treated in an earlier report. The results presented in this report (radiation doserates for the different types of aircrafts in the different years) will, in a later stage of the project be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for the work in this report is information provided by several active pilots, members of the Pilots Associations, along with calculations performed using US Federal Aviation Administration's computer code CARI-3N. 2 refs

  8. Cosmic radiation and airline pilots. Exposure patterns of Norwegian pilots flying aircraft not used by SAS

    Energy Technology Data Exchange (ETDEWEB)

    Tveten, U.

    1997-05-01

    The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institutt for Energiteknikk (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). The project has been partially financed by the Norwegian Research Council. Originating from the Norwegian project, a number of similar projects have been started or are in the planning stage in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots flying a great diversity of different aircrafts. Aircrafts that appear in the time-tables of the Scandinavian Airline System (SAS) have been treated in an earlier report. The results presented in this report (radiation doserates for the different types of aircrafts in the different years) will, in a later stage of the project be utilized to estimate the individual radiation exposure histories. The major sources of information used as basis for the work in this report is information provided by several active pilots, members of the Pilots Associations, along with calculations performed using US Federal Aviation Administration`s computer code CARI-3N. 2 refs.

  9. Chemical homogeneity and particle size distribution of dairy cow TMR along the feeding alley with different mixing times

    Directory of Open Access Journals (Sweden)

    Vera Perricone

    2018-06-01

    Full Text Available Following the concepts of precision feeding, the right components balance (Sova et al., 2014 and the correct particle size distribution (PSD, Khan et al., 2014 of total mixed ration (TMR are essential for a complete homogeneity of the diet and are strongly influenced by adopted mixing time (MT, Humer et al., 2018, Schingoethe et al.,2017. The aim of the trial was to determine the influence of two MTs (MT1≤7min and MT2>7min on the chemical homogeneity and PSD along the feeding alley. Diets were performed with a horizontal cutter-mixer wagon (Gulliver 4016, Sgariboldi, and TMR samples were collected from the beginning, middle and end of the feeding alley after discharge. Triplicate samples of the diet were collected for chemical composition analyses (moisture, CP, Ash, EE, NDF and ADF and PSD evaluation (Heinrichs and Kononoff, 2002 over two months (two sampling/week. Statistical analysis was performed by a PROC MIXED for repeated measurements of SAS. MT1 evidenced a non-uniform distribution of moisture content along the feeding alley (P=0.05: lower moisture was found at the end than at the beginning and in the middle (47.55 vs 51.13 and 51.00%, respectively; P<0.01. No significant effects of MTs were recorded for other chemical parameters. The PSD showed trend to a higher retained amount of fibre in MT1 upper sieve (14.79 vs. 10.14%; P=0.06, while lower amount of feed was found in middle and bottom sieve than MT2 (38.9 and 12.81 vs 42.17 and 14.32%, respectively; P=0.08 and P=0.06. With respect to TMR distribution along the feeding alley, no differences were found between MT1 and MT2. Day of sampling evidenced significant variation both in chemical and physical composition (P<0.05. Obtained preliminary data evidenced the influence of MTs on composition and on PSD of the provided diet; results suggest to daily measure moisture of raw material in order to avoid negative changes in dry matter intake.

  10. The Development of Student’s Activity Sheets (SAS) Based on Multiple Intelligences and Problem-Solving Skills Using Simple Science Tools

    Science.gov (United States)

    Wardani, D. S.; Kirana, T.; Ibrahim, M.

    2018-01-01

    The aim of this research is to produce SAS based on MI and problem-solving skills using simple science tools that are suitable to be used by elementary school students. The feasibility of SAS is evaluated based on its validity, practicality, and effectiveness. The completion Lesson Plan (LP) implementation and student’s activities are the indicators of SAS practicality. The effectiveness of SAS is measured by indicators of increased learning outcomes and problem-solving skills. The development of SAS follows the 4-D (define, design, develop, and disseminate) phase. However, this study was done until the third stage (develop). The written SAS was then validated through expert evaluation done by two experts of science, before its is tested to the target students. The try-out of SAS used one group with pre-test and post-test design. The result of this research shows that SAS is valid with “good” category. In addition, SAS is considered practical as seen from the increase of student activity at each meeting and LP implementation. Moreover, it was considered effective due to the significant difference between pre-test and post-test result of the learning outcomes and problem-solving skill test. Therefore, SAS is feasible to be used in learning.

  11. A Comprehensive Model of the Dry Desulphurisation Process Une modélisation non empirique du procédé de désulfuration par voie sèche

    Directory of Open Access Journals (Sweden)

    Flament P.

    2006-11-01

    Full Text Available Due to the high investment cost of the wet scrubbing, the dry desulphurisation process remains an attractive way to remove sulphur dioxide when reduction level should not be higher than 90%. In this technique, the SO2 is removed from flue gases by direct injection of small calcium based sorbents such as calcium carbonate (CaCO3 or calcium hydroxide (Ca(OH² . The sorbent is first transformed into calcium oxide (CaO before reacting with SO2 to form a stable calcium sulphate (CaSO4. Although the global reactions are rather simple, a full description of the mechanism requires the knowledge of both, the initial physical properties of the sorbent and the evolution of these properties during the reaction. Furthermore, the way how particles are injected and dispersed into the SO2 containing gases is also a major issue of the dry desulphurisation process. Both aspects are considered in this paper since a specialised routine was build to describe the calcination-sulphation process and coupled with the KIVA code to perform 3D calculations under real industrial conditions. The desulphurisation model was first tested alone using the kinetic data of the International Flame Research Foundation and then, coupled with KIVA to simulate the desulphurisation process in a new type of boiler which is developed by BABCOCK Entreprise and the Institut Français du Pétrole (the AUDE boiler. In this last case, the objective was to determine the sorbent injection locations leading to the highest desulphurisation efficiencies. As the dispersion of particles is an important parameter of the desulphurisation process, an example of validation of the KIVA dispersion model is also presented in this paper. For the selected test case, i. e: particle dispersion in a plane mixing layer, a good agreement was found between the experimental results of Ando et al (1990 and the calculations performed with KIVA. Par suite du coût d'investissement très élevé du procédé de lavage

  12. Repositioning the substrate activity screening (SAS) approach as a fragment-based method for identification of weak binders.

    Science.gov (United States)

    Gladysz, Rafaela; Cleenewerck, Matthias; Joossens, Jurgen; Lambeir, Anne-Marie; Augustyns, Koen; Van der Veken, Pieter

    2014-10-13

    Fragment-based drug discovery (FBDD) has evolved into an established approach for "hit" identification. Typically, most applications of FBDD depend on specialised cost- and time-intensive biophysical techniques. The substrate activity screening (SAS) approach has been proposed as a relatively cheap and straightforward alternative for identification of fragments for enzyme inhibitors. We have investigated SAS for the discovery of inhibitors of oncology target urokinase (uPA). Although our results support the key hypotheses of SAS, we also encountered a number of unreported limitations. In response, we propose an efficient modified methodology: "MSAS" (modified substrate activity screening). MSAS circumvents the limitations of SAS and broadens its scope by providing additional fragments and more coherent SAR data. As well as presenting and validating MSAS, this study expands existing SAR knowledge for the S1 pocket of uPA and reports new reversible and irreversible uPA inhibitor scaffolds. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. SAS Code for Calculating Intraclass Correlation Coefficients and Effect Size Benchmarks for Site-Randomized Education Experiments

    Science.gov (United States)

    Brandon, Paul R.; Harrison, George M.; Lawton, Brian E.

    2013-01-01

    When evaluators plan site-randomized experiments, they must conduct the appropriate statistical power analyses. These analyses are most likely to be valid when they are based on data from the jurisdictions in which the studies are to be conducted. In this method note, we provide software code, in the form of a SAS macro, for producing statistical…

  14. The School Anxiety Scale-Teacher Report (SAS-TR): translation and psychometric properties of the Iranian version.

    Science.gov (United States)

    Hajiamini, Zahra; Mohamadi, Ashraf; Ebadi, Abbas; Fathi- Ashtiani, Ali; Tavousi, Mahmoud; Montazeri, Ali

    2012-07-18

    The School Anxiety Scale-Teacher Report (SAS-TR) was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC) was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety) that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

  15. The School Anxiety Scale-Teacher Report (SAS-TR: translation and psychometric properties of the Iranian version

    Directory of Open Access Journals (Sweden)

    Hajiamini Zahra

    2012-07-01

    Full Text Available Abstract Background The School Anxiety Scale-Teacher Report (SAS-TR was designed to assess anxiety in children at school. The SAS-TR is a proxy rated measure and could assess social anxiety, generalized anxiety and also gives a total anxiety score. This study aimed to translate and validate the SAS-TR in Iran. Methods The translation and cultural adaptation of the original questionnaire were carried out in accordance with the published guidelines. A sample of students participated in the study. Reliability was estimated using internal consistency and test-retest analysis. Validity was assessed using content validity. The factor structure of the questionnaire was extracted by performing both exploratory and confirmatory factor analyses. Results In all 200 elementary students aged 6 to 10 years were studied. Considering the recommended cut-off values, overall the prevalence of high anxiety condition in elementary students was found to be 21 %. Cronbach's alpha coefficient for the Iranian SAS-TR was 0.92 and intraclass correlation coefficient (ICC was found to be 0.81. The principal component analysis indicated a two-factor structure for the questionnaire (generalized and social anxiety that jointly accounted for 55.3 % of variances observed. The confirmatory factory analysis also indicated a good fit to the data for the two-latent structure of the questionnaire. Conclusion In general the findings suggest that the Iranian version of SAS-TR has satisfactory reliability, and validity for measuring anxiety in 6 to 10 years old children in Iran. It is simple and easy to use and now can be applied in future studies.

  16. A SAS/AF application to administrate and query a file of incidents occurring in foreign nuclear power plants

    International Nuclear Information System (INIS)

    Durbec, V.

    1994-07-01

    The Research and Development Division of Electricite de France has a file of incidents occurring in foreign pressurized water nuclear power stations. These incidents have an impact either on safety or reliability. The file is stored on an IBM 3090. For each incident, a docket is assigned, containing the identity of the nuclear plant and information in the form of code or text on the incident. An application has been built with the SAS System under IBM (MVS) in order to: - allow the input of new nuclear plant identities, monthly operating coefficients and new incidents; - subset data from each SAS data set, according to selection criteria (country, manufacturers, period, materials, etc...) in the form of coded fields and characters strings; -calculate simple statistical analyses on subset data (histograms of break duration, distribution of operating coefficients, cross-tabulation tables of sets and materials which bring about the incident) with a restitution on screen and/or printer; - edit an annual booklet containing general results of functioning of plants. After validation, data retrieved from the database are used in probabilistic safety analysis of nuclear power plants and materials designing studies (comparison with French materials, identification of factors having an impact on performance). The application is an interactive menu-driven tool and contains data entry screens (for new data or selection criteria). These screens have been built with SAS/AF software and Screen Control Language. Data selection and processing have been developed with Base SAS and SAS/GRAPH software. (author). 1 ref., 6 figs., 2 tabs

  17. Comparison of ArcGIS and SAS Geostatistical Analyst to Estimate Population-Weighted Monthly Temperature for US Counties.

    Science.gov (United States)

    Xiaopeng, Q I; Liang, Wei; Barker, Laurie; Lekiachvili, Akaki; Xingyou, Zhang

    Temperature changes are known to have significant impacts on human health. Accurate estimates of population-weighted average monthly air temperature for US counties are needed to evaluate temperature's association with health behaviours and disease, which are sampled or reported at the county level and measured on a monthly-or 30-day-basis. Most reported temperature estimates were calculated using ArcGIS, relatively few used SAS. We compared the performance of geostatistical models to estimate population-weighted average temperature in each month for counties in 48 states using ArcGIS v9.3 and SAS v 9.2 on a CITGO platform. Monthly average temperature for Jan-Dec 2007 and elevation from 5435 weather stations were used to estimate the temperature at county population centroids. County estimates were produced with elevation as a covariate. Performance of models was assessed by comparing adjusted R 2 , mean squared error, root mean squared error, and processing time. Prediction accuracy for split validation was above 90% for 11 months in ArcGIS and all 12 months in SAS. Cokriging in SAS achieved higher prediction accuracy and lower estimation bias as compared to cokriging in ArcGIS. County-level estimates produced by both packages were positively correlated (adjusted R 2 range=0.95 to 0.99); accuracy and precision improved with elevation as a covariate. Both methods from ArcGIS and SAS are reliable for U.S. county-level temperature estimates; However, ArcGIS's merits in spatial data pre-processing and processing time may be important considerations for software selection, especially for multi-year or multi-state projects.

  18. SAS-4 is recruited to a dynamic structure in newly forming centrioles that is stabilized by the gamma-tubulin-mediated addition of centriolar microtubules.

    Science.gov (United States)

    Dammermann, Alexander; Maddox, Paul S; Desai, Arshad; Oegema, Karen

    2008-02-25

    Centrioles are surrounded by pericentriolar material (PCM), which is proposed to promote new centriole assembly by concentrating gamma-tubulin. Here, we quantitatively monitor new centriole assembly in living Caenorhabditis elegans embryos, focusing on the conserved components SAS-4 and SAS-6. We show that SAS-4 and SAS-6 are coordinately recruited to the site of new centriole assembly and reach their maximum levels during S phase. Centriolar SAS-6 is subsequently reduced by a mechanism intrinsic to the early assembly pathway that does not require progression into mitosis. Centriolar SAS-4 remains in dynamic equilibrium with the cytoplasmic pool until late prophase, when it is stably incorporated in a step that requires gamma-tubulin and microtubule assembly. These results indicate that gamma-tubulin in the PCM stabilizes the nascent daughter centriole by promoting microtubule addition to its outer wall. Such a mechanism may help restrict new centriole assembly to the vicinity of preexisting parent centrioles that recruit PCM.

  19. Sneutrino mixing

    International Nuclear Information System (INIS)

    Grossman, Y.

    1997-10-01

    In supersymmetric models with nonvanishing Majorana neutrino masses, the sneutrino and antisneutrino mix. The conditions under which this mixing is experimentally observable are studied, and mass-splitting of the sneutrino mass eigenstates and sneutrino oscillation phenomena are analyzed

  20. Un procédé de validation des métamodèles par les métadonnées

    OpenAIRE

    Plantec , Alain; Ribaud , Vincent

    2005-01-01

    International audience; La norme STEP a pour objet de standardiser des modèles de données par métier. Ce standard a développé un procédé de validation de la conformité des modèles dans lequel l'instanciation est un composant essentiel : un modèle est valide si un ensemble d'instances conformes au modèle est jugé sémantiquement correct par un expert du domaine. Appliqué à la métamodélisation, cette approche permet de construire et de valider les métamodèles par ranements successifs. Cette méth...

  1. PRO-C3-levels in patients with HIV/HCV-Co-infection reflect fibrosis stage and degree of portal hypertension

    DEFF Research Database (Denmark)

    Jansen, Christian; Leeming, Diana J; Mandorfer, Mattias

    2014-01-01

    BACKGROUND: Liver-related deaths represent the leading cause of mortality among patients with HIV/HCV-co-infection, and are mainly related to complications of fibrosis and portal hypertension. In this study, we aimed to evaluate the structural changes by the assessment of extracellular matrix (ECM......) derived degradation fragments in peripheral blood as biomarkers for fibrosis and portal hypertension in patients with HIV/HCV co-infection. METHODS: Fifty-eight patients (67% male, mean age: 36.5 years) with HIV/HCV-co-infection were included in the study. Hepatic venous pressure gradient (HVPG......4M and C5M levels were higher in patients with portal hypertension (HVPG>5 mmHg). CONCLUSION: PRO-C3 levels reflect liver injury, stage of liver fibrosis and degree of portal hypertension in HIV/HCV-co-infected patients. Furthermore, C4M and C5M were associated with increased portal pressure...

  2. The neo-epitope specific PRO-C3 ELISA measures true formation of type III collagen associated with liver and muscle parameters

    DEFF Research Database (Denmark)

    Nielsen, Mette J; Nedergaard, Anders F; Sun, Shu

    2013-01-01

    AIM: The present study describes the assessment of true formation of type III collagen in different pathologies using a neo-epitope specific competitive Enzyme-linked immunosorbent assay (ELISA) towards the N-terminal propeptide of type III collagen (PRO-C3). METHODS: The monoclonal antibody...... was raised against the N-protease mediated cleavage site of the N-terminal propeptide of type III collagen and a competitive ELISA was developed using the selected antibody. The assay was evaluated in relation to neo-epitope specificity, technical performance, and as a marker for liver fibrosis and muscle...... mass using the rat carbon tetrachloride (CCl4) model and a study of immobilization induced muscle loss in humans, respectively. RESULTS: The ELISA was neo-epitope specific, technically stable and can be assessed in serum and plasma samples. In the CCl4 liver fibrosis model it was observed that serum...

  3. SAS6-like protein in Plasmodium indicates that conoid-associated apical complex proteins persist in invasive stages within the mosquito vector.

    Science.gov (United States)

    Wall, Richard J; Roques, Magali; Katris, Nicholas J; Koreny, Ludek; Stanway, Rebecca R; Brady, Declan; Waller, Ross F; Tewari, Rita

    2016-06-24

    The SAS6-like (SAS6L) protein, a truncated paralogue of the ubiquitous basal body/centriole protein SAS6, has been characterised recently as a flagellum protein in trypanosomatids, but associated with the conoid in apicomplexan Toxoplasma. The conoid has been suggested to derive from flagella parts, but is thought to have been lost from some apicomplexans including the malaria-causing genus Plasmodium. Presence of SAS6L in Plasmodium, therefore, suggested a possible role in flagella assembly in male gametes, the only flagellated stage. Here, we have studied the expression and role of SAS6L throughout the Plasmodium life cycle using the rodent malaria model P. berghei. Contrary to a hypothesised role in flagella, SAS6L was absent during gamete flagellum formation. Instead, SAS6L was restricted to the apical complex in ookinetes and sporozoites, the extracellular invasive stages that develop within the mosquito vector. In these stages SAS6L forms an apical ring, as we show is also the case in Toxoplasma tachyzoites. The SAS6L ring was not apparent in blood-stage invasive merozoites, indicating that the apical complex is differentiated between the different invasive forms. Overall this study indicates that a conoid-associated apical complex protein and ring structure is persistent in Plasmodium in a stage-specific manner.

  4. Contrôle et éléments de maîtrise de la contamination par la levure brettanomyces au cours du procédé de vinification en rouge

    OpenAIRE

    Barbin, Pascal

    2006-01-01

    Les levures du genre Dekkera/Brettanomyces sont reconnues comme les agents de contamination des vins rouges responsables des défauts phénolés et animaux. Une procédure complète de dépistage et d'isolement a été développée en associant plusieurs critères discriminants. Elle a permis de confirmer la présence du contaminant tout au long du procédé, de la matière première (raisins sur pieds), au produit fini (vin en bouteilles). Des études de terrain, en amont du procédé de vinification ont mis e...

  5. A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

    Science.gov (United States)

    Elliott, Alan C; Hynan, Linda S

    2011-04-01

    The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  6. Comparison of the SASSYS/SAS4A radial core expansion reactivity feedback model and the empirical correlation for FFTF

    International Nuclear Information System (INIS)

    Wigeland, R.A.

    1987-01-01

    The present emphasis on inherent safety for LMR designs has resulted in a need to represent the various reactivity feedback mechanisms as accurately as possible. The dominant negative reactivity feedback has been found to result from radial expansion of the core for most postulated ATWS events. For this reason, a more detailed model for calculating the reactivity feedback from radial core expansion has been recently developed for use with the SASSYS/SAS4A Code System. The purpose of this summary is to present an extension to the model so that it is more suitable for handling a core restraint design as used in FFTF, and to compare the SASSYS/SAS4A results using this model to the empirical correlation presently being used to account for radial core expansion reactivity feedback to FFTF

  7. Linear mixed models for longitudinal data

    CERN Document Server

    Molenberghs, Geert

    2000-01-01

    This paperback edition is a reprint of the 2000 edition. This book provides a comprehensive treatment of linear mixed models for continuous longitudinal data. Next to model formulation, this edition puts major emphasis on exploratory data analysis for all aspects of the model, such as the marginal model, subject-specific profiles, and residual covariance structure. Further, model diagnostics and missing data receive extensive treatment. Sensitivity analysis for incomplete data is given a prominent place. Several variations to the conventional linear mixed model are discussed (a heterogeity model, conditional linear mixed models). This book will be of interest to applied statisticians and biomedical researchers in industry, public health organizations, contract research organizations, and academia. The book is explanatory rather than mathematically rigorous. Most analyses were done with the MIXED procedure of the SAS software package, and many of its features are clearly elucidated. However, some other commerc...

  8. Plan de negocio para la creación de la empresa Itech S.A.S.

    OpenAIRE

    2012-01-01

    ITEH S.A.S ofrecerá el servicio de consultoría y asesoría en el uso y gestión de las tecnologías de la información y las comunicaciones a las pymes del sector servicios, específicamente en el subsector jurídico, con el fin de apoyar sus procesos de negocio y fortalecer la competitividad de las mismas.

  9. Annotated Computer Output for Illustrative Examples of Clustering Using the Mixture Method and Two Comparable Methods from SAS.

    Science.gov (United States)

    1987-06-26

    BUREAU OF STANDAR-S1963-A Nw BOM -ILE COPY -. 4eo .?3sa.9"-,,A WIN* MAT HEMATICAL SCIENCES _*INSTITUTE AD-A184 687 DTICS!ELECTE ANNOTATED COMPUTER OUTPUT...intoduction to the use of mixture models in clustering. Cornell University Biometrics Unit Technical Report BU-920-M and Mathematical Sciences Institute...mixture method and two comparable methods from SAS. Cornell University Biometrics Unit Technical Report BU-921-M and Mathematical Sciences Institute

  10. Proteomic analysis of cellular response induced by boron neutron capture reaction in human squamous cell carcinoma SAS cells

    International Nuclear Information System (INIS)

    Sato, Akira; Itoh, Tasuku; Imamichi, Shoji; Kikuhara, Sota; Fujimori, Hiroaki; Hirai, Takahisa; Saito, Soichiro; Sakurai, Yoshinori; Tanaka, Hiroki; Nakamura, Hiroyuki; Suzuki, Minoru

    2015-01-01

    To understand the mechanism of cell death induced by boron neutron capture reaction (BNCR), we performed proteome analyses of human squamous tumor SAS cells after BNCR. Cells were irradiated with thermal neutron beam at KUR after incubation under boronophenylalanine (BPA)(+) and BPA(−) conditions. BNCR mainly induced typical apoptosis in SAS cells 24 h post-irradiation. Proteomic analysis in SAS cells suggested that proteins functioning in endoplasmic reticulum, DNA repair, and RNA processing showed dynamic changes at early phase after BNCR and could be involved in the regulation of cellular response to BNCR. We found that the BNCR induces fragments of endoplasmic reticulum-localized lymphoid-restricted protein (LRMP). The fragmentation of LRMP was also observed in the rat tumor graft model 20 hours after BNCT treatment carried out at the National Nuclear Center of the Republic of Kazakhstan. These data suggest that dynamic changes of LRMP could be involved during cellular response to BNCR. - Highlights: • BNCR in human squamous carcinoma cells caused typical apoptotic features. • BNCR induced fragments of LRMP, in human squamous carcinoma and rat tumor model. • The fragmentation of LRMP could be involved in cellular response to BNCR.

  11. Modelling the detachment dependence on strike point location in the small angle slot divertor (SAS) with SOLPS

    Science.gov (United States)

    Casali, Livia; Covele, Brent; Guo, Houyang

    2017-10-01

    The new Small Angle Slot (SAS) divertor in DIII-D is characterized by a shallow-angle target enclosed by a slot structure about the strike point (SP). SOLPS modelling results of SAS have demonstrated divertor closure's utility in widening the range of acceptable densities for adequate heat handling. An extensive database of runs has been built to study the detachment dependence on SP location in SAS. Density scans show that lower Te at lower upstream density occur when the SP is at the critical location in the slot. The cooling front spreads across the entire target at higher densities, in agreement with experimental Langmuir probe measurements. A localized increase of the atomic and molecular density takes place near the SP, which reduces the target incident power density and facilitates detachment at lower upstream density. Systematic scans of variables such as power, transport, and viscosity have been carried out to assess the detachment sensitivity. Therein, a positive role of the viscosity is found. This work supported by DOE Contract Number DE-FC02-04ER54698.

  12. Cerebral scintigraphy by 99mTc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state

    International Nuclear Information System (INIS)

    Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B.

    1997-01-01

    The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of 99m Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a 'riddly' aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

  13. SAS4A and FPIN2X validation for slow ramp TOP accidents: experiments TS-1 and TS-2

    International Nuclear Information System (INIS)

    Hill, D.J.

    1986-01-01

    The purpose of this paper is to present further results in the series of experimental analyses being performed using SAS4A and FPIN2X in order to provide a systematic validation of these codes. The two experiments discussed here, TS-1 and TS-2, were performed by Westinghouse Hanford/Hanford Engineering Development Laboratory (WHC/HEDL) in the Transient Reactor Test (TREAT) Facility. They were slow ramp transient overpowers (TOPs) of ∼ 5 cent/s equivalent Fast Flux Test Facility (FFTF) ramp rate, single-pin experiments in flowing sodium loops. The good agreement found here adds significantly to the experimental data base that provides the foundation for SAS4A and FPIN2X validation. It also shows that prefailure internal fuel motion is a phenomenon that has to be correctly accounted for, not only as a potential inherent safety mechanism, but also before any accurate prediction of fuel failure and subsequent fuel motion and the associated reactivity effects can be made. This is also true for metal-fueled pins. This capability is provided by PINACLE, which is being incorporated into SAS4A

  14. Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

    International Nuclear Information System (INIS)

    Tveten, U.

    1999-02-01

    The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway

  15. Cosmic radiation and airline pilots. Exposure patterns of Norwegian SAS-pilots 1960 to 1994. Revised Version

    Energy Technology Data Exchange (ETDEWEB)

    Tveten, U

    1999-02-01

    The present report is a revised version of an earlier report (IFE/KR/E-96/008). The revision has been carried out since a completely new version of the computational tool has recently been released. All calculations have been redone. The work which is presented in this report is part of a Norwegian epidemiological project, carried out in cooperation between Institute for Energy Technology (IFE), the Norwegian Cancer Registry (NCR) and the Norwegian Radiation Protection Authority (NRPA). Originating from the Norwegian project, a number of similar projects have been started in a number of European countries. The present report lays the ground for estimation of individual exposure histories to cosmic radiation of pilots employed by the the Scandinavian Airlines System (SAS). The result presented in this report (radiation dose rates for the different types of aircraft in the different years) were calculated with the most recent computer program for this purpose, the CARI-5E from the United States Civil Aviation Authority. The other major sources of information used as basis for this work is the collection of old SAS time tables found the the SAS Museum at Fornebu Airport in Oslo, and information provided by members of the Pilots Association in Norway.

  16. Stratospheric Air Sub-sampler (SAS) and its application to analysis of Delta O-17(CO2) from small air samples collected with an AirCore

    NARCIS (Netherlands)

    Mrozek, Dorota Janina; van der Veen, Carina; Hofmann, Magdalena E. G.; Chen, Huilin; Kivi, Rigel; Heikkinen, Pauli; Rockmann, Thomas

    2016-01-01

    We present the set-up and a scientific application of the Stratospheric Air Sub-sampler (SAS), a device to collect and to store the vertical profile of air collected with an AirCore (Karion et al., 2010) in numerous sub-samples for later analysis in the laboratory. The SAS described here is a 20m

  17. Le Procès de Tôkyô, l’empereur et la question du Yasukuni The Tokyo trial, the emperor and the Yasukuni shrine

    Directory of Open Access Journals (Sweden)

    Tetsuya Takahashi

    2010-07-01

    Full Text Available Au Japon, toute une partie de la classe politique conservatrice persiste à refuser les conclusions du procès de Tôkyô, considérant celui-ci comme une justice « orchestrée par les vainqueurs ». Ce faisant, les partisans de cette thèse se trouvent dans une contradiction puisque l’empereur Hirohito lui-même, qui avait exprimé sa gratitude auprès des forces d’occupation américaines pour l’avoir épargné, en avait de facto admis les conclusions. Ce paradoxe pour le camp conservateur est aggravé par le fait que l’empereur a cessé de se rendre au sanctuaire Yasukuni à partir du moment où les mânes de quatorze haut responsables condamnés comme criminels de guerre lors du procès de Tôkyô y furent transférés sans son accord. Ces contradictions internes à la droite irrédentiste japonaise invite ainsi à envisager le procès de Tôkyô sous un autre jour. Loin d’être une simple « justice de vainqueur », la stratégie américaine fut éminemment bénéfique pour la droite conservatrice : Hirohito n’étant pas traduit en justice, il devenait possible de lui conférer une fonction symbolique par l’article I de la nouvelle Constitution de 1946, ce qui permit à la droite conservatrice de sauver le système impérial et d’assurer une continuité entre l’avant et l’après-guerre.In Japan, a part of the conservative political class continues to deny the conclusions of the Tokyo trial, as a justice “of the victors”. But the proponents of this theory face a contradiction since the Emperor Hirohito himself expressed his gratitude to the American occupation authority (SCAP for not condemning him. Hirohito therefore admitted the conclusions of the trial. The paradox goes even further as the conservative leaders publicize their visit to Yasukuni shrine although the Emperor himself ceased to visit the shrine after top leaders convicted as war criminals at the Tokyo Trial were transferred to the shrine without his

  18. Simulació d'un procés industrial de cristallització de clorur de sodi (NaCl i aplicacions

    Directory of Open Access Journals (Sweden)

    Josefina Renedo Omaechevarría

    2014-12-01

    Full Text Available La cristal·lització a partir de dissolucions és important industrialment  donada la gran varietat de substàncies que es comercialitzen  cristal·litzades. Per millorar el procés  d’ensenyament-aprenentatge d’aquesta “Operació Bàsica”, en aquest treball, realitzat com a Treball de Fi de Carrera de la titulació  d’ Enginyeria Química, s’ha  desenvolupat un programa de simulació d’una cristal·lització industrial de NaCl.  L’objectiu ha sigut manejar  eines de càlcul  per simular  i optimitzar una cristal·lització, la qual cosa permet conèixer més profundament el procés de la cristal·lització i la utilització de les eines de càlcul, és a dir, utilitzar simultàniament els coneixements adquirits en les assignatures de Operacions amb Sòlid  i la de Simulació i Optimització de Processos. L’objectiu últim de l’ús d’aquest programa de simulació és que els estudiants de l’assignatura optativa Operacions  amb Sòlids del Grau en Enginyeria Química puguin fer servir aquest recurs a l’aula. Amb el programa utilitzat, en llenguatge Fortran, obtenim, d’una manera ràpida i eficaç, la velocitat de creixement dels cristalls G i la velocitat de nucleació B. Un cop calculats els valors de G i B, es pot programar una cristal·lització per obtenir  la distribució de tamany de cristall (DTC desitjat. Per últim s´han determinat els valors dels paràmetres cinètiques de B0.

  19. Mixing Ventilation

    DEFF Research Database (Denmark)

    Kandzia, Claudia; Kosonen, Risto; Melikov, Arsen Krikor

    In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection...

  20. EDITORIAL Proceedings of the XIV International Conference on Small-Angle Scattering, SAS-2009

    Science.gov (United States)

    Ungar, Goran; Heenan, Richard

    2010-10-01

    particles based on the radial pair distance distribution function. The model takes account of different types of disorder, i.e. of both 1st ('thermal') and 2nd ('paracrystalline') kind, as well as finite size, stacking and orientational disorder. In paper 012014 Salvino Ciccariello works out the 3D correlation function of plane objects, specifically a triangle of a general shape. This paves the way to analysing morphologies that can be approximated by cylinders of different cross-sections. Papers 012051 (Polte et al.) and 012047 (Bras et al.) report the use of SAS in combination with X-ray spectroscopy. Ristic et al. describe a real-time study of crystal nucleation induced by ultrasound (012049), while Marianne Imperor-Clerc et al. present an investigation of lyotropic liquid crystals under shear (012052). In the Polymers section Geoff Mitchell describes modelling of SANS data on electrospun fibres (012042), while Cabral et al. describes a study of nanoparticle aggregation in bulk and thin polymer films (012046). Work on phospholipid membranes was reported by Spinozzi et al. and by Onai et al. in papers 012019 and 012018, respectively. The latter deals with the effect of osmotic pressure on model 'lipid rafts', these being considered as having an important role in the function of the mammalian cell membrane. Readers interested in biological systems will find a number of other interesting papers describing the use of either SAXS or SANS in the Biological Systems and Membranes section. A number of descriptions of recent designs of SAXS (synchrotron) and SANS beamlines, as well as detector developments can be found in the section on Beamlines and Instrumentation. Goran Ungar, Editor-in-Chief Richard Heenan, Deputy Editor-in-Chief

  1. The Music Therapy Session Assessment Scale (MT-SAS): Validation of a new tool for music therapy process evaluation.

    Science.gov (United States)

    Raglio, Alfredo; Gnesi, Marco; Monti, Maria Cristina; Oasi, Osmano; Gianotti, Marta; Attardo, Lapo; Gontero, Giulia; Morotti, Lara; Boffelli, Sara; Imbriani, Chiara; Montomoli, Cristina; Imbriani, Marcello

    2017-11-01

    Music therapy (MT) interventions are aimed at creating and developing a relationship between patient and therapist. However, there is a lack of validated observational instruments to consistently evaluate the MT process. The purpose of this study was the validation of Music Therapy Session Assessment Scale (MT-SAS), designed to assess the relationship between therapist and patient during active MT sessions. Videotapes of a single 30-min session per patient were considered. A pilot study on the videotapes of 10 patients was carried out to help refine the items, define the scoring system and improve inter-rater reliability among the five raters. Then, a validation study on 100 patients with different clinical conditions was carried out. The Italian MT-SAS was used throughout the process, although we also provide an English translation. The final scale consisted of 7 binary items accounting for eye contact, countenance, and nonverbal and sound-music communication. In the pilot study, raters were found to share an acceptable level of agreement in their assessments. Explorative factorial analysis disclosed a single homogeneous factor including 6 items (thus supporting an ordinal total score), with only the item about eye contact being unrelated to the others. Moreover, the existence of 2 different archetypal profiles of attuned and disattuned behaviours was highlighted through multiple correspondence analysis. As suggested by the consistent results of 2 different analyses, MT-SAS is a reliable tool that globally evaluates sonorous-musical and nonverbal behaviours related to emotional attunement and empathetic relationship between patient and therapist during active MT sessions. Copyright © 2017 John Wiley & Sons, Ltd.

  2. Atomistic modelling of scattering data in the Collaborative Computational Project for Small Angle Scattering (CCP-SAS).

    Science.gov (United States)

    Perkins, Stephen J; Wright, David W; Zhang, Hailiang; Brookes, Emre H; Chen, Jianhan; Irving, Thomas C; Krueger, Susan; Barlow, David J; Edler, Karen J; Scott, David J; Terrill, Nicholas J; King, Stephen M; Butler, Paul D; Curtis, Joseph E

    2016-12-01

    The capabilities of current computer simulations provide a unique opportunity to model small-angle scattering (SAS) data at the atomistic level, and to include other structural constraints ranging from molecular and atomistic energetics to crystallography, electron microscopy and NMR. This extends the capabilities of solution scattering and provides deeper insights into the physics and chemistry of the systems studied. Realizing this potential, however, requires integrating the experimental data with a new generation of modelling software. To achieve this, the CCP-SAS collaboration (http://www.ccpsas.org/) is developing open-source, high-throughput and user-friendly software for the atomistic and coarse-grained molecular modelling of scattering data. Robust state-of-the-art molecular simulation engines and molecular dynamics and Monte Carlo force fields provide constraints to the solution structure inferred from the small-angle scattering data, which incorporates the known physical chemistry of the system. The implementation of this software suite involves a tiered approach in which GenApp provides the deployment infrastructure for running applications on both standard and high-performance computing hardware, and SASSIE provides a workflow framework into which modules can be plugged to prepare structures, carry out simulations, calculate theoretical scattering data and compare results with experimental data. GenApp produces the accessible web-based front end termed SASSIE-web , and GenApp and SASSIE also make community SAS codes available. Applications are illustrated by case studies: (i) inter-domain flexibility in two- to six-domain proteins as exemplified by HIV-1 Gag, MASP and ubiquitin; (ii) the hinge conformation in human IgG2 and IgA1 antibodies; (iii) the complex formed between a hexameric protein Hfq and mRNA; and (iv) synthetic 'bottlebrush' polymers.

  3. Desarrollo de las competencias en los altos ejecutivos y mandos medios de estrella petrolera de Colombia S.A.S.

    OpenAIRE

    Díaz Hurtado, David Hernando; Villamarín Rincón, Bibiana

    2012-01-01

    La situación actual de la compañía Estrella Petrolera de Colombia S.A.S, está demandando un replanteamiento en el manejo su departamento de Recursos Humanos. Como parte de la estrategia de la compañía para afrontar los retos del negocio se desea adoptar el proceso de Gestión Humana basada en competencias el cual brindará la orientación necesaria para el desarrollo del conocimiento y el aprendizaje permanente. Los métodos de gestión de Recursos Humanos basados en competencias facilita...

  4. SAS Enterprise Data Integration Server - A Complete Solution Designed To Meet the Full Spectrum of Enterprise Data Integration Needs

    Directory of Open Access Journals (Sweden)

    Silvia BOLOHAN

    2012-05-01

    Full Text Available This paper is about why is Data Integration important for organisations around the world. Organizations struggle daily with the challenges of large distributed data volumes, inconsistently defined data across disparate systems and the high expectations of data consumers who depend on information to be correct, complete and available when they need it. SAS Enterprise Data Integration Server provides a comprehensive solution that enables organizations to solve these challenges in a timely, cost-effective manner with the ability to efficiently manage data integration projects on an enterprise scale, increasing overall productivity and reducing the total cost of ownership.

  5. SPSS and SAS programs for determining the number of components using parallel analysis and velicer's MAP test.

    Science.gov (United States)

    O'Connor, B P

    2000-08-01

    Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.

  6. Exploring item and higher order factor structure with the Schmid-Leiman solution: syntax codes for SPSS and SAS.

    Science.gov (United States)

    Wolff, Hans-Georg; Preising, Katja

    2005-02-01

    To ease the interpretation of higher order factor analysis, the direct relationships between variables and higher order factors may be calculated by the Schmid-Leiman solution (SLS; Schmid & Leiman, 1957). This simple transformation of higher order factor analysis orthogonalizes first-order and higher order factors and thereby allows the interpretation of the relative impact of factor levels on variables. The Schmid-Leiman solution may also be used to facilitate theorizing and scale development. The rationale for the procedure is presented, supplemented by syntax codes for SPSS and SAS, since the transformation is not part of most statistical programs. Syntax codes may also be downloaded from www.psychonomic.org/archive/.

  7. ZEISIG: Approximate calculation of the intergranular gas fraction and the intragranular gas driven swelling for SAS4A

    International Nuclear Information System (INIS)

    Vaeth, L.

    1993-02-01

    A simple model has been developed for estimating, under steady-state irradiation conditions and for operational transients, the fraction of intergranular gas residing in fast reactor fuel and the intragranular gas driven swelling. The total gas retention in the fuel, the grain size and the irradiation conditions (mainly time dependent temperatures) must be known. Use has been made of parts of the fission gas model contained in the code LAKU and of results calculated with this code. The routine (named ZEISIG) is intended for insertion into the fast reactor accident model SAS4A as an extension of its fission gas model for steady-state reactor operation. (orig.) [de

  8. Implementation, verification, and validation of the FPIN2 metal fuel pin mechanics model in the SASSYS/SAS4A LMR transient analysis codes

    International Nuclear Information System (INIS)

    Sofu, T.; Kramer, J.M.

    1994-01-01

    The metal fuel version of the FPIN2 code which provides a validated pin mechanics model is coupled with SASSYS/SAS4A Version 3.0 for single pin calculations. In this implementation, SASSY/SAS4A provides pin temperatures, and FPIN2 performs analysis of pin deformation and predicts the time and location of cladding failure. FPIN2 results are also used for the estimates of axial expansion of fuel and associated reactivity effects. The revalidation of the integrated SAS-FPIN2 code system is performed using TREAT tests

  9. Cdk1 Phosphorylates Drosophila Sas-4 to Recruit Polo to Daughter Centrioles and Convert Them to Centrosomes.

    Science.gov (United States)

    Novak, Zsofia A; Wainman, Alan; Gartenmann, Lisa; Raff, Jordan W

    2016-06-20

    Centrosomes and cilia are organized by a centriole pair comprising an older mother and a younger daughter. Centriole numbers are tightly regulated, and daughter centrioles (which assemble in S phase) cannot themselves duplicate or organize centrosomes until they have passed through mitosis. It is unclear how this mitotic "centriole conversion" is regulated, but it requires Plk1/Polo kinase. Here we show that in flies, Cdk1 phosphorylates the conserved centriole protein Sas-4 during mitosis. This creates a Polo-docking site that helps recruit Polo to daughter centrioles and is required for the subsequent recruitment of Asterless (Asl), a protein essential for centriole duplication and mitotic centrosome assembly. Point mutations in Sas-4 that prevent Cdk1 phosphorylation or Polo docking do not block centriole disengagement during mitosis, but block efficient centriole conversion and lead to embryonic lethality. These observations can explain why daughter centrioles have to pass through mitosis before they can duplicate and organize a centrosome. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

  10. A SAS-based solution to evaluate study design efficiency of phase I pediatric oncology trials via discrete event simulation.

    Science.gov (United States)

    Barrett, Jeffrey S; Jayaraman, Bhuvana; Patel, Dimple; Skolnik, Jeffrey M

    2008-06-01

    Previous exploration of oncology study design efficiency has focused on Markov processes alone (probability-based events) without consideration for time dependencies. Barriers to study completion include time delays associated with patient accrual, inevaluability (IE), time to dose limiting toxicities (DLT) and administrative and review time. Discrete event simulation (DES) can incorporate probability-based assignment of DLT and IE frequency, correlated with cohort in the case of DLT, with time-based events defined by stochastic relationships. A SAS-based solution to examine study efficiency metrics and evaluate design modifications that would improve study efficiency is presented. Virtual patients are simulated with attributes defined from prior distributions of relevant patient characteristics. Study population datasets are read into SAS macros which select patients and enroll them into a study based on the specific design criteria if the study is open to enrollment. Waiting times, arrival times and time to study events are also sampled from prior distributions; post-processing of study simulations is provided within the decision macros and compared across designs in a separate post-processing algorithm. This solution is examined via comparison of the standard 3+3 decision rule relative to the "rolling 6" design, a newly proposed enrollment strategy for the phase I pediatric oncology setting.

  11. Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D

    Science.gov (United States)

    Frerichs, H.; Schmitz, O.; Covele, B.; Feng, Y.; Guo, H. Y.; Hill, D.

    2018-05-01

    Numerical simulations of toroidal asymmetries in a tightly baffled small angle slot (SAS) divertor on the DIII-D tokamak show that toroidal asymmetries in divertor closure result in (non-axisymmetric) local onset of detachment within a density window of 10-15% on top of the nominal threshold separatrix density. The SAS divertor is explored at DIII-D for improving access to cold, dissipative/detached divertor conditions. The narrow width of the slot divertor coupled with a small magnetic field line-to-target angle facilitates the buildup of neutral density, thereby increasing radiative and neutrals-related (atoms and molecules) losses in the divertor. Small changes in the strike point location can be expected to have a large impact on divertor conditions. The combination of misaligned slot structure and non-axisymmetric perturbations to the magnetic field configuration causes the strike point to move along the divertor target plate, possibly leaving the divertor slot at some locations. The latter extreme case essentially introduces an opening in the divertor slot from where recycling neutrals can easily escape, and thereby degrade the performance of the slot divertor. Such a strike point dislocation is approximated by a finite gap in the divertor baffle for which 3D edge plasma and neutral gas simulations are performed with the EMC3-EIRENE code.

  12. Representing continuous t-norms in quantum computation with mixed states

    International Nuclear Information System (INIS)

    Freytes, H; Sergioli, G; Arico, A

    2010-01-01

    A model of quantum computation is discussed in (Aharanov et al 1997 Proc. 13th Annual ACM Symp. on Theory of Computation, STOC pp 20-30) and (Tarasov 2002 J. Phys. A: Math. Gen. 35 5207-35) in which quantum gates are represented by quantum operations acting on mixed states. It allows one to use a quantum computational model in which connectives of a four-valued logic can be realized as quantum gates. In this model, we give a representation of certain functions, known as t-norms (Menger 1942 Proc. Natl Acad. Sci. USA 37 57-60), that generalize the triangle inequality for the probability distribution-valued metrics. As a consequence an interpretation of the standard operations associated with the basic fuzzy logic (Hajek 1998 Metamathematics of Fuzzy Logic (Trends in Logic vol 4) (Dordrecht: Kluwer)) is provided in the frame of quantum computation.

  13. ORNL-SAS: Versatile software for calculation of small-angle x-ray and neutron scattering intensity profiles from arbitrary structures

    International Nuclear Information System (INIS)

    Heller, William T; Tjioe, Elina

    2007-01-01

    ORNL-SAS is software for calculating solution small-angle scattering intensity profiles from any structure provided in the Protein Data Bank format and can also compare the results with experimental data

  14. Does age matter? Controls on the spatial organization of age and life expectancy in hillslopes, and implications for transport parameterization using rSAS

    Science.gov (United States)

    Kim, M.; Harman, C. J.; Troch, P. A. A.

    2017-12-01

    Hillslopes have been extensively explored as a natural fundamental unit for spatially-integrated hydrologic models. Much of this attention has focused on their use in predicting the quantity of discharge, but hillslope-based models can potentially be used to predict the composition of discharge (in terms of age and chemistry) if they can be parameterized terms of measurable physical properties. Here we present advances in the use of rank StorAge Selection (rSAS) functions to parameterize transport through hillslopes. These functions provide a mapping between the distribution of water ages in storage and in outfluxes in terms of a probability distribution over storage. It has previously been shown that rSAS functions are related to the relative partitioning and arrangement of flow pathways (and variabilities in that arrangement), while separating out the effect of changes in the overall rate of fluxes in and out. This suggests that rSAS functions should have a connection to the internal organization of flow paths in a hillslope.Using a combination of numerical modeling and theoretical analysis we examined: first, the controls of physical properties on internal spatial organization of age (time since entry), life expectancy (time to exit), and the emergent transit time distribution and rSAS functions; second, the possible parameterization of the rSAS function using the physical properties. The numerical modeling results showed the clear dependence of the rSAS function forms on the physical properties and relations between the internal organization and the rSAS functions. For the different rates of the exponential saturated hydraulic conductivity decline with depth the spatial organization of life expectancy varied dramatically and determined the rSAS function forms, while the organizaiton of the age showed less qualitative differences. Analytical solutions predicting this spatial organization and the resulting rSAS function were derived for simplified systems. These

  15. Escala de sociotropía-autonomía (SAS: propiedades psicométricas de la adaptación a Colombia

    Directory of Open Access Journals (Sweden)

    Ronald Alberto Toro Tobar

    2014-07-01

    Full Text Available Este artículo presenta los resultados de una investigación cuyo objetivo fue adaptar y validar la Escala de Sociotropía-Autonomía (SAS de Clark & Beck, la cual evalúa dos dimensiones de personalidad cognitiva: la orientación interpersonal y actitudes de logro y metas personales. La muestra consistió en 460 participantes entre 15 y 71 años, escolarizados de distintos estratos socioeconómicos. Los resultados mostraron índices de consistencia interna en la Escala SAS: total (,85, SAS Sociotropía (,82 y menores para SAS autonomía (,61. Estos resultados guardan relación con investigaciones acerca de este instrumento; por lo tanto se considera confiable y válido para el contexto sociocultural; además podría apoyar la investigación en psicoterapia cognitiva y en procesos clínicos basados en el modelo diátesis estrés. Abstract This paper presents the results of a study whose aim was adapt and validate the Sociotropy-Autonomy Scale (SAS Clark & Beck. This scale assesses two dimensions of cognitive personality: interpersonal orientation and attitudes of achievement and personal goals. The sample consisted of 460 participants between 15 and 71 years enrolled from different socioeconomic levels. The results showed internal consistency in SAS Scale: Total (.85, SAS Sociotropy (.82 and lower for SAS Autonomy (.61. These results are relevant to research on this instrument. It is considered a reliable and valid instrument for socio-cultural context; could also support research in cognitive psychotherapy and clinical processes based on the diathesis stress model.

  16. Moving-Bed Process for Residue Hydrotreating Procédé à lit mobile pour l'hydrotraitement des résidus

    Directory of Open Access Journals (Sweden)

    Euzen J. P.

    2006-11-01

    the solid particles during the sequential withdrawal. It is the reason why the movement of the solid and, moreover, the residence time distribution of the catalyst particles have been especially followed. To this end, a new technique has been developed to measure the concentration of magnetically marked particles. Furthermore, a specific effort has been devoted to technological problems such as selection and developement of special valves able to insure efficient tightness between the various sections at elevated temperatures and pressures in the presence of solid particles. Another study has been devoted to the operation of addition and withdrawal of the catalyst to and from the reactor running at high pressure and temperature. The solid flows and the catalyst transfer conditions have been carefully studied and tested. Finally a demonstration unit has been built at a semi-industrial scale in a mini-refinery. It was a convincing way to check all the conclusions drawed from the developement step with models, smaller scale pilots and mock-ups. As the fluids and the catalyst were real industrial products, the feasibility of the whole process has been demonstrated. Therefore, a new industrial process using the countercurrent moving bed is now available and permits a very efficient use of the catalyst particles. Un grand nombre de procédés chimiques, pétrochimiques ou de raffinage nécessitent un contact entre 3 phases : un produit de base liquide, un réactif gazeux et un catalyseur solide. Il arrive souvent que l'activité du catalyseur soit réduite par un empoisonnement des sites actifs ou par des dépôts de coke. C'est particulièrement le cas des procédés utilisés dans l'hydrotraitement des résidus lourds. La durée de vie du catalyseur étant réduite, il est nécessaire de remplacer ou de régénérer fréquemment le catalyseur devenu inactif. Différentes solutions permettent d'effectuer ce travail tout en limitant les pertes de temps et de production

  17. Mixed parentage

    DEFF Research Database (Denmark)

    Bang Appel, Helene; Singla, Rashmi

    2016-01-01

    Despite an increase in cross border intimate relationships and children of mixed parentage, there is little mention or scholarship about them in the area of childhood and migrancy in the Nordic countries. The international literature implies historical pathologisation, contestation and current...... of identity formation in the . They position themselves as having an “in-between” identity or “ just Danes” in their every day lives among friends, family, and during leisure activities. Thus a new paradigm is evolving away- from the pathologisation of mixed children, simplified one-sided categories...

  18. Riik võib lüüa SAS-i esmaspäevaks Estonian Airi omanikeringist välja / Erik Müürsepp, Mikk Salu

    Index Scriptorium Estoniae

    Müürsepp, Erik

    2008-01-01

    SAS osaleb Estonian Airþile lisakapitali eraldamises ainult juhul, kui Eesti riik müüb oma osaluses lennukompaniis SAS-ile. Peaminister Andrus Ansipi ning majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

  19. Mixed Movements

    DEFF Research Database (Denmark)

    Brabrand, Helle

    2010-01-01

    levels than those related to building, and this exploration is a special challenge and competence implicit artistic development work. The project Mixed Movements generates drawing-material, not primary as representation, but as a performance-based media, making the body being-in-the-media felt and appear...... as possible operational moves....

  20. Lateral Mixing

    Science.gov (United States)

    2014-09-30

    negative (right panel c) and the kinetic energy dissipation is larger than that expected from meterological forcing alone (right panel a). This is...10.1002/grl.50919. Shcherbina, A. et al., 2014, The LatMix Summer Campaign: Submesoscale Stirring in the Upper Ocean., Bull. American Meterological

  1. Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros

    Science.gov (United States)

    Valeri, Linda; VanderWeele, Tyler J.

    2012-01-01

    Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this paper are several-fold. First we seek to bring the developments in mediation analysis for non linear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically and we compare the types of inferences about mediation that are allowed by a variety of software macros. PMID:23379553

  2. DEFORM-4: fuel pin characterization and transient response in the SAS4A accident analysis code system

    International Nuclear Information System (INIS)

    Miles, K.J.; Hill, D.J.

    1986-01-01

    The DEFORM-4 module is the segment of the SAS4A Accident Analysis Code System that calculates the fuel pin characterization in response to a steady state irradiation history, thereby providing the initial conditions for the transient calculation. The various phenomena considered include fuel porosity migration, fission gas bubble induced swelling, fuel cracking and healing, fission gas release, cladding swelling, and the thermal-mechanical state of the fuel and cladding. In the transient state, the module continues the thermal-mechanical response calculation, including fuel melting and central cavity pressurization, until cladding failure is predicted and one of the failed fuel modules is initiated. Comparisons with experimental data have demonstrated the validity of the modeling approach

  3. SPSS and SAS programs for addressing interdependence and basic levels-of-analysis issues in psychological data.

    Science.gov (United States)

    O'Connor, Brian P

    2004-02-01

    Levels-of-analysis issues arise whenever individual-level data are collected from more than one person from the same dyad, family, classroom, work group, or other interaction unit. Interdependence in data from individuals in the same interaction units also violates the independence-of-observations assumption that underlies commonly used statistical tests. This article describes the data analysis challenges that are presented by these issues and presents SPSS and SAS programs for conducting appropriate analyses. The programs conduct the within-and-between-analyses described by Dansereau, Alutto, and Yammarino (1984) and the dyad-level analyses described by Gonzalez and Griffin (1999) and Griffin and Gonzalez (1995). Contrasts with general multilevel modeling procedures are then discussed.

  4. SAS and SPSS macros to calculate standardized Cronbach's alpha using the upper bound of the phi coefficient for dichotomous items.

    Science.gov (United States)

    Sun, Wei; Chou, Chih-Ping; Stacy, Alan W; Ma, Huiyan; Unger, Jennifer; Gallaher, Peggy

    2007-02-01

    Cronbach's a is widely used in social science research to estimate the internal consistency of reliability of a measurement scale. However, when items are not strictly parallel, the Cronbach's a coefficient provides a lower-bound estimate of true reliability, and this estimate may be further biased downward when items are dichotomous. The estimation of standardized Cronbach's a for a scale with dichotomous items can be improved by using the upper bound of coefficient phi. SAS and SPSS macros have been developed in this article to obtain standardized Cronbach's a via this method. The simulation analysis showed that Cronbach's a from upper-bound phi might be appropriate for estimating the real reliability when standardized Cronbach's a is problematic.

  5. Mediation analysis allowing for exposure-mediator interactions and causal interpretation: theoretical assumptions and implementation with SAS and SPSS macros.

    Science.gov (United States)

    Valeri, Linda; Vanderweele, Tyler J

    2013-06-01

    Mediation analysis is a useful and widely employed approach to studies in the field of psychology and in the social and biomedical sciences. The contributions of this article are several-fold. First we seek to bring the developments in mediation analysis for nonlinear models within the counterfactual framework to the psychology audience in an accessible format and compare the sorts of inferences about mediation that are possible in the presence of exposure-mediator interaction when using a counterfactual versus the standard statistical approach. Second, the work by VanderWeele and Vansteelandt (2009, 2010) is extended here to allow for dichotomous mediators and count outcomes. Third, we provide SAS and SPSS macros to implement all of these mediation analysis techniques automatically, and we compare the types of inferences about mediation that are allowed by a variety of software macros. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  6. Modification of the SAS4A Safety Analysis Code for Integration with the ADAPT Discrete Dynamic Event Tree Framework.

    Energy Technology Data Exchange (ETDEWEB)

    Jankovsky, Zachary Kyle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Denman, Matthew R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    It is difficult to assess the consequences of a transient in a sodium-cooled fast reactor (SFR) using traditional probabilistic risk assessment (PRA) methods, as numerous safety-related sys- tems have passive characteristics. Often there is significant dependence on the value of con- tinuous stochastic parameters rather than binary success/failure determinations. One form of dynamic PRA uses a system simulator to represent the progression of a transient, tracking events through time in a discrete dynamic event tree (DDET). In order to function in a DDET environment, a simulator must have characteristics that make it amenable to changing physical parameters midway through the analysis. The SAS4A SFR system analysis code did not have these characteristics as received. This report describes the code modifications made to allow dynamic operation as well as the linking to a Sandia DDET driver code. A test case is briefly described to demonstrate the utility of the changes.

  7. Investigation of the thermal mixing in a T-junction flow with different SRS approaches

    Energy Technology Data Exchange (ETDEWEB)

    Gritskevich, M.S., E-mail: gritskevich@ymail.com [St. Petersburg State Polytechnical University, 195251 St. Petersburg (Russian Federation); Garbaruk, A.V. [St. Petersburg State Polytechnical University, 195251 St. Petersburg (Russian Federation); Frank, Th.; Menter, F.R. [Software Development Department, ANSYS, 83714 Otterfing (Germany)

    2014-11-15

    Highlights: • Global (SAS, DDES) and zonal (ELES-WMLES) models are compared for the T-junction flow. • All the models accurately predict mean, RMS, and spectral quantities. • ELES-WMLES approach yields very good results independent of the advection scheme. • SAS and the DDES models are slightly less accurate. • SAS depends on the advection scheme. - Abstract: An investigation of different turbulence Scale-Resolving Simulation (SRS) modeling approaches for the flow in a T-junction has been conducted using the Scale-Adaptive Simulation (SAS), the Delayed Detached Eddy Simulation (DDES) and the Embedded Large Eddy Simulation (ELES) methods. The results show that all models are able to accurately predict mean and RMS velocity profiles and velocity spectra, when are used in combination with a low dissipation advection scheme. However, when a slightly more dissipative scheme is used, the SAS model yields less accurate results, indicating that this flow does not produce a strong enough flow instability to allow the safe application of this model. The DDES and the ELES models show less sensitivity to the numerical setting compared to the SAS model. The main goal of the study is the accurate prediction of heat transfer on the walls in the mixing zone. In that respect, the ELES method produces the most consistent agreement with the experimental data.

  8. Parity mixing

    International Nuclear Information System (INIS)

    Adelberger, E.G.

    1975-01-01

    The field of parity mixing in light nuclei bears upon one of the exciting and active problems of physics--the nature of the fundamental weak interaction. It is also a subject where polarization techniques play a very important role. Weak interaction theory is first reviewed to motivate the parity mixing experiments. Two very attractive systems are discussed where the nuclear physics is so beautifully simple that the experimental observation of tiny effects directly measures parity violating (PV) nuclear matrix elements which are quite sensitive to the form of the basic weak interaction. Since the measurement of very small analyzing powers and polarizations may be of general interest to this conference, some discussion is devoted to experimental techniques

  9. El procés d'integració de la primera biblioteca interuniversitària d'Espanya : la Biblioteca del campus universitari de Manresa

    Directory of Open Access Journals (Sweden)

    Riu Amblàs, Trini

    2015-12-01

    Full Text Available Fa deu anys, la biblioteca de l'Escola Politècnica Superior d'Enginyeria de Manresa de la Universitat Politècnica de Catalunya, la de la Fundació Universitària del Bages i la del Centre de Suport del Bages de la Universitat Oberta de Catalunya, s'integraven per formar una única biblioteca universitària: la Biblioteca del campus universitari de Manresa. Amb l'objectiu de descriure aquest procés d'integració, s'introdueix què són les biblioteques integrades, se n'enumeren els beneficis i se'n presenten els diferents models. A continuació, partint de l'experiència, es defineixen les actuacions dutes a terme per aconseguir la integració total d'usuaris, recursos i serveis, i es descriu l'estructura i organització creades per integrar de manera eficient les biblioteques existents en una de nova. Així, s'analitza el context i es descriu la gestió duta a terme en cada una de les fases del procés, des de la planificació i definició del projecte fins a la integració total del personal, els serveis, el fons i el catàleg. Finalment, es posen de manifest les aportacions de l'experiència d'integrar-se i treballar conjuntament durant deu anys.Hace diez años, la biblioteca de la Escola Politècnica Superior d'Enginyeria de Manresa de la Universitat Politècnica de Catalunya, la de la Fundació Universitària del Bages y la del Centre de Suport del Bages de la Universitat Oberta de Catalunya se integraban para formar una única biblioteca universitaria: la Biblioteca del campus universitario de Manresa. Con el objetivo de describir este proceso de integración, se introduce qué son las bibliotecas integradas, se enumeran sus beneficios y se presentan sus diferentes modelos. A continuación, partiendo de la experiencia, se definen las actuaciones llevadas a cabo para conseguir la integración total de usuarios, recursos y servicios, y se describe la estructura y organización creadas para integrar de manera eficiente las bibliotecas

  10. [Mixed states: evolution of classifications].

    Science.gov (United States)

    Pringuey, D; Cherikh, F; Giordana, B; Fakra, E; Dassa, D; Cermolacce, M; Belzeaux, R; Maurel, M; Azorin, J-M

    2013-12-01

    The nosological position of mixed states has followed the course of classifying methods in psychiatry, the steps of the invention of the clinic, progress in the organization of care, including the discoveries of psychopharmacology. The clinical observation of a mixture of symptoms emerging from usually opposite clinical conditions is classical. In the 70s, a syndromic specification fixed the main symptom combinations but that incongruous assortment failed to stabilize the nosological concept. Then stricter criteriology was proposed. To be too restrictive, a consensus operates a dimensional opening that attempts to meet the pragmatic requirements of nosology validating the usefulness of the class system. This alternation between rigor of categorization and return to a more flexible criteriological option reflects the search for the right balance between nosology and diagnosis. The definition of mixed states is best determined by their clinical and prognostic severity, related to the risk of suicide, their lower therapeutic response, the importance of their psychiatric comorbidities, anxiety, emotional lability, alcohol abuse. Trying to compensate for the lack of categorical definitions and better reflecting the clinical field problems, new definitions complement criteriology with dimensional aspects, particularly taking into account temperaments. Copyright © 2013 L’Encéphale. Published by Elsevier Masson SAS.. All rights reserved.

  11. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2006-01-01

    Simplifying the often confusing array of software programs for fitting linear mixed models (LMMs), Linear Mixed Models: A Practical Guide Using Statistical Software provides a basic introduction to primary concepts, notation, software implementation, model interpretation, and visualization of clustered and longitudinal data. This easy-to-navigate reference details the use of procedures for fitting LMMs in five popular statistical software packages: SAS, SPSS, Stata, R/S-plus, and HLM. The authors introduce basic theoretical concepts, present a heuristic approach to fitting LMMs based on bo

  12. Recent progress on the R and D program of the seismic attenuation system (SAS) proposed for the advanced gravitational wave detector, LIGO II

    International Nuclear Information System (INIS)

    Bertolini, A.; Cella, G.; Chenyang, W.; Salvo, R. de; Kovalik, J.; Marka, S.; Sannibale, V.; Takamori, A.; Tariq, H.; Viboud, N.

    2001-01-01

    High-performance Seismic Isolation Systems in gravitational wave interferometers are needed not only to increase the sensitivity of the detectors but also to guarantee long periods of stable operation. SAS is essentially a system which produces the required in-band seismic isolation by use of passive mechanical filters and actively reduces the out of band seismic noise using inertial damping. The passive isolation is achieved for all the 6 degrees of freedom, with an Inverted Pendulum and a chain of single wire pendula whose masses are the Geometrical Anti-Spring Filters (GASF). The active control is applied to reduce mainly the noise below 4 Hz and to damp the resonances of the chain acting from the inverted pendulum table. Here we present a brief overview of SAS and recent results achieved from the full scale SAS prototype

  13. DIMG92 : un simulateur de formation pour le procédé DIMERSOL Dimg92: a Training Simulator for the Dimersol Process

    Directory of Open Access Journals (Sweden)

    Nica A.

    2006-11-01

    Full Text Available DIMG92 est un simulateur de formation sur le procédé pétrochimique DIMERSOL (procédé IFP de dimérisation du propylène. En simulant le réacteur et ses équipements annexes, les opérateurs s'exercent à conduire l'unité et comprennent les effets des divers paramètres à prendre en compte. Le simulateur est composé de deux logiciels : - Un logiciel de modélisation, basé sur la représentation mathématique de connaissances physico-chimiques et physiques. Aucun empirisme n'est utilisé dans le modèle. Ce logiciel a été développé par l'Institut Français du Pétrole (IFP. - Un logiciel d'environnement de simulation dynamique pour la formation. Ce logiciel à interface graphique et interactive est distribué par la société française Réalisation en Systémique Industrielle (RSI. Industrial units are tending to become more and more complex and are characterized by a very high degree of integration. The operating of such units requires highly skilled operators. This is why dynamic simulators have training as their prime goal. The DIMG92 simulator falls within this category. It simulates the reaction section of the DIMERSOL G process in a steady state or not. The DIMERSOL G process is designed for the dimerization of propylene into hexene. In the modeled unit, the reaction section includes a liquid-phase reactor and a pump-around on which a heat exchanger is installed. The heat exchanger, which uses water as the cooling fluid, evacuates the heat of reaction. The reaction temperature is between 45 and 55°C. The reactor pressure is in the vicinity of 22 effective bars. The catalyst is in a liquid state. A standard feedstock is made up of 30 weight % inert matter and 70% propylene. Modeling is broken down into three parts : the kinetics, the reactor, the heat exchanger. Mathematical modeling of the oligomerization kinetics was performed at Institut Français du Pétrole (IFP in 1987. By taking into consideration the initiation

  14. The Proposal of Co-Branding Strategy PT. XYZ and SAS in Automotive Sector in SPAIN Market to Increase PT. XYZ Reputation in International Market

    OpenAIRE

    Putra A, Freggy Griyatta; Nasution, Reza Ashari

    2012-01-01

    The development of the lubricant market in the Asia-Pacific, Africa, Middle East, and South America is an opportunity for PT.XYZ in the future. PT. XYZ wants to improve their brand image through co-branding with the SAS company as one of the local oil company in Spain. The study also analyzes the co-branding strategy through Joint Venture of PT. XYZ with SAS to improve the company's brand image in the International market. The conceptual framework of this research started from the goal of PT....

  15. NParCov3: A SAS/IML Macro for Nonparametric Randomization-Based Analysis of Covariance

    Directory of Open Access Journals (Sweden)

    Richard C. Zink

    2012-07-01

    Full Text Available Analysis of covariance serves two important purposes in a randomized clinical trial. First, there is a reduction of variance for the treatment effect which provides more powerful statistical tests and more precise confidence intervals. Second, it provides estimates of the treatment effect which are adjusted for random imbalances of covariates between the treatment groups. The nonparametric analysis of covariance method of Koch, Tangen, Jung, and Amara (1998 defines a very general methodology using weighted least-squares to generate covariate-adjusted treatment effects with minimal assumptions. This methodology is general in its applicability to a variety of outcomes, whether continuous, binary, ordinal, incidence density or time-to-event. Further, its use has been illustrated in many clinical trial settings, such as multi-center, dose-response and non-inferiority trials.NParCov3 is a SAS/IML macro written to conduct the nonparametric randomization-based covariance analyses of Koch et al. (1998. The software can analyze a variety of outcomes and can account for stratification. Data from multiple clinical trials will be used for illustration.

  16. Numerical exploration of non-axisymmetric divertor closure in the small angle slot (SAS) divertor at DIII-D

    Science.gov (United States)

    Frerichs, Heinke; Schmitz, Oliver; Covele, Brent; Guo, Houyang; Hill, David; Feng, Yuhe

    2017-10-01

    In the Small Angle Slot (SAS) divertor in DIII-D, the combination of misaligned slot structure and non-axisymmetric perturbations to the magnetic field causes the strike point to vary radially along the divertor slot and even leave it at some toroidal locations. This effect essentially introduces an opening in the divertor slot from where recycling neutrals can easily escape, and thereby degrade performance of the slot divertor. This effect has been approximated by a finite gap in the divertor baffle. Simulations with EMC3-EIRENE show that a toroidally localized loss of divertor closure can result in non-axisymmetric divertor densities and temperatures. This introduces a density window of 10-15% on top of the nominal threshold separatrix density during which a non-axisymmetric onset of local detachment occurs, initially leaving the gap and up to 60 deg beyond that still attached. Conversely, the impact of such toroidally localized divertor perturbations on the toroidal symmetry of midplane separatrix conditions is small. This work has been funded by the U.S. Department of Energy under Early Career Award Grant DE-SC0013911, and Grant DE-FC02-04ER54698.

  17. Localised mixing and heterogeneity in the plankton food web in a frontal region of the Sargasso Sea

    DEFF Research Database (Denmark)

    Richardson, Katherine; Bendtsen, Joøgen; Christensen, Jens Tang

    2014-01-01

    the diatom communities at 10 m and > 100 m (in the deep chlorophyll maximum, DCM) than in other parts of the frontal region. Thorpe displacements supported the hypothesis of elevated mixing intensities around these stations, as did vertical mixing rates inferred from stratification and vertical current shear...... with the stratification (Brunt-V is l frequency), with the greatest fractions found below 75 m at the most weakly stratified stations. While this study cannot directly link these observations to eel larvae ecology, Munk et al. (2010; Proc R Soc B 277: 3593-3599) reported that eel larvae were most abundant at locations...

  18. El procés d'avaluació i intervenció psicològica a pacients amb trastorns per abús d' alcohol i/o altres substàncies psicotròpiques

    OpenAIRE

    Trasovares Navarrete, María Victoria

    2004-01-01

    Aquest treball, realitzat al Centre d'Atenció i Seguiment de Drogodependències (CASD) de Nou Barris, ha tingut com a objectiu principal observar el rol del psicòleg clínic en el procés d'avaluació i intervenció psicoterapèutica en pacients que presenten un trastorn per dependència de substàncies psicotròpiques. Este trabajo, realizado en el Centro de Atención y Seguimiento de Drogodependencias (CASD) de Nou Barris, ha tenido como principal objetivo observar el rol del psicólogo clínico en ...

  19. Reflexions sociològiques figuratives i de procés sobre l’esport i la globalització: algunes observacions conceptuals i teòriques, amb especial referència al futbol

    OpenAIRE

    Dunning, Eric

    2009-01-01

    Aquest article es divideix en tres parts. La primera consisteix en un comentari conceptual teòric sobre la globalització i en diversos exemples del món globalitzat de l’esport; la segona és un comentari sobre el desenvolupament i l’extensió global del futbol; i la tercera exposa el comentari d’algunes patologies relacionades amb l’esport. Tot al llarg de l’article s’aplica l’enfocament sociològic figuratiu i de procés desenvolupat per Norbert Elias. En resum, aquest treball és fonamentalment ...

  20. An analysis of the number of parking bays and checkout counters for a supermarket using SAS simulation studio

    Science.gov (United States)

    Kar, Leow Soo

    2014-07-01

    Two important factors that influence customer satisfaction in large supermarkets or hypermarkets are adequate parking facilities and short waiting times at the checkout counters. This paper describes the simulation analysis of a large supermarket to determine the optimal levels of these two factors. SAS Simulation Studio is used to model a large supermarket in a shopping mall with car park facility. In order to make the simulation model more realistic, a number of complexities are introduced into the model. For example, arrival patterns of customers vary with the time of the day (morning, afternoon and evening) and with the day of the week (weekdays or weekends), the transport mode of arriving customers (by car or other means), the mode of payment (cash or credit card), customer shopping pattern (leisurely, normal, exact) or choice of checkout counters (normal or express). In this study, we focus on 2 important components of the simulation model, namely the parking area, the normal and express checkout counters. The parking area is modeled using a Resource Pool block where one resource unit represents one parking bay. A customer arriving by car seizes a unit of the resource from the Pool block (parks car) and only releases it when he exits the system. Cars arriving when the Resource Pool is empty (no more parking bays) leave without entering the system. The normal and express checkouts are represented by Server blocks with appropriate service time distributions. As a case study, a supermarket in a shopping mall with a limited number of parking bays in Bangsar was chosen for this research. Empirical data on arrival patterns, arrival modes, payment modes, shopping patterns, service times of the checkout counters were collected and analyzed to validate the model. Sensitivity analysis was also performed with different simulation scenarios to identify the parameters for the optimal number the parking spaces and checkout counters.

  1. Development and psychometric properties of the Suicidality: Treatment Occurring in Paediatrics (STOP) Suicidality Assessment Scale (STOP-SAS) in children and adolescents.

    Science.gov (United States)

    Flamarique, I; Santosh, P; Zuddas, A; Arango, C; Purper-Ouakil, D; Hoekstra, P J; Coghill, D; Schulze, U; Dittmann, R W; Buitelaar, J K; Lievesley, K; Frongia, R; Llorente, C; Méndez, I; Sala, R; Fiori, F; Castro-Fornieles, J

    2016-12-13

    To create a self-reported, internet-based questionnaire for the assessment of suicide risk in children and adolescents. As part of the EU project 'Suicidality: Treatment Occurring in Paediatrics' (STOP project), we developed web-based Patient Reported Outcome Measures (PROMs) for children and adolescents and for proxy reports by parents and clinicians in order to assess suicidality. Based on a literature review, expert panels and focus groups of patients, we developed the items of the STOP Suicidality Assessment Scale (STOP-SAS) in Spanish and English, translated it into four more languages, and optimized it for web-based presentation using the HealthTracker TM platform. Of the total 19 questions developed for the STOP-SAS, four questions that assess low-level suicidality were identified as screening questions (three of them for use with children, and all four for use with adolescents, parents and clinicians). A total of 395 adolescents, 110 children, 637 parents and 716 clinicians completed the questionnaire using the HealthTracker TM , allowing us to evaluate the internal consistency and convergent validity of the STOP-SAS with the clinician-rated Columbia Suicide Severity Rating Scale (C-SSRS). Validity was also assessed with the receiver operating characteristic (ROC) area of the STOP-SAS with the C-SSRS. The STOP-SAS comprises 19 items in its adolescent, parent, and clinician versions, and 14 items in its children's version. Good internal consistency was found for adolescents (Cronbach's alpha: 0.965), children (Cronbach's alpha: 0.922), parents (Cronbach's alpha: 0.951) and clinicians (Cronbach's alpha: 0.955) versions. A strong correlation was found between the STOP-SAS and the C-SSRS for adolescents (r:0.670), parents (r:0.548), clinicians (r:0.863) and children (r:0.654). The ROC area was good for clinicians' (0.917), adolescents' (0.834) and parents' (0.756) versions but only fair (0.683) for children's version. The STOP-SAS is a comprehensive, web

  2. Understanding Self-regulation Behaviors in South Asians With Coronary Artery Disease: A Mixed-Methods Study.

    Science.gov (United States)

    Jiwani, Rozmin B; Cleveland, Lisa M; Patel, Darpan I; Virani, Salim S; Gill, Sara L

    South Asians (SAs) have a well-documented risk for mortality related to coronary artery disease (CAD). However, there is a lack of evidence to guide the implementation and dissemination of primary and secondary interventions to control and deter progression of CAD in SAs. The aim of this study is to explore and describe self-regulation behaviors in SAs with CAD using Leventhal's Common Sense Model. In this mixed-methods study, quantitative data were collected using 3 survey questionnaires (demographics, Illness Perception Questionnaire-Revised, and Coping/Self-Regulation Behaviors). Before completing the surveys, a subset of the sample (n = 20) participated in individual face-to-face or telephone interviews. A total of 102 SAs were enrolled (age, 53.5 ± 9.98 years). On average, participants rated themselves high (63 ± 3.06) on negative perceptions. In addition, they discussed desi diet, stress, a lack of physical activity, ignoring symptoms, and kismet (fate) as the most important perceived causes of their CAD. Most of the participants modified their lifestyle after their CAD event. Participants expressed regret for not having changed their lifestyle earlier when they were experiencing early symptoms of their CAD. Findings from this study enhance the understanding of self-regulation behaviors of SAs with CAD. Ultimately, these findings will inform the development and implementation of targeted interventions that address culture-specific lifestyle modification for SAs with CAD.

  3. Performance Analysis of Compositional and Modified Black-Oil Models For a Gas Lift Process Analyse des performances de modèles black-oil pour le procédé d’extraction par injection de gaz

    Directory of Open Access Journals (Sweden)

    Mahmudi M.

    2013-03-01

    Full Text Available Artificial gas lift is frequently used to boost production rate of mature oil fields. An integrated mathematical model was developed in order to track the spatial and temporal changes in various components of the continuous gas lift process. The computational demand for solving the comprehensive gas lift model highly depends on the thermodynamic treatment of the hydrocarbon fluids involved. A full compositional treatment using an equation of state provides the most accurate results but at a high computational cost. The results of this article showed that the computational cost can be halved without sacrificing accuracy by using reduced parameter stability and flash calculation procedures. It was also demonstrated that a Modified Black-Oil treatment of the fluids can provide reasonable accuracy at a much-reduced computational cost. The Modified Black-Oil treatment provides a valuable tool when the model has to be solved many hundreds of times to find the optimal combination of the gas lift parameters. Les procédés artificiels d’extraction par injection de gaz sont utilisés pour améliorer le taux de récupération des champs pétroliers matures. Un modèle mathématique intégré a été développé pour détecter de faibles changements temporels et spatiaux dans plusieurs composants des procédés continus d’extraction par injection de gaz. La solution numérique utilisée pour résoudre le modèle du procédé d’extraction dépend fortement du comportement thermodynamique des hydrocarbures impliqués. Un traitement complet de la composition utilisant une équation d’état offre les résultats les plus précis, mais à un coût de calcul très élevé. Les résultats de nos travaux de recherche montrent que l’implication des paramètres de stabilité et des procédures de calcul flash, peut diviser par deux le coût du calcul tout en gardant la précision attendue. Ces travaux montrent que la précision admissible peut être

  4. An alternative to the SAS2H/ORIGEN-S sequence to account for water-density effects in BWR systems

    International Nuclear Information System (INIS)

    Leal, L.C.; Hermann, O.W.; Ryman, J.C.; Broadhead, B.L.

    1996-01-01

    A scheme to generate one-group problem-dependent cross-section libraries for point-depletion calculations with the ORIGEN-S code was developed as an alternative to the SAS2H sequence of the SCALE code system. The methodology, named Automatic Rapid Processing (ARP), generates libraries by interpolating in SAS2H precomputed cross section libraries. The method has been used to generate ORIGEN-S cross section libraries on a personal computer resulting in a great reduction of computer time without a sacrifice of accuracy over that required by corresponding SAS2H calculations. The ARP scheme generates ORIGEN-S libraries by interpolating in burnup and enrichment for PWR assemblies. The intent of this work is to describe a procedure which extends the application of the ARP methodology to BWR assemblies by including the axial water-density effects in the generation of the ORIGEN-S cross-section libraries. The axial liquid- to-steam change of state in BWR systems leads to a variation in the water density and significant cross-section changes as a function of the water density. To account for the axial water-density changes in a SAS2H calculation, the water density is entered explicitly in the generation of the one-group ORIGEN-S cross-section libraries generated from the SCALE 27-group library. In its original version, ARP does not account for the effects of water-density variation in ORIGEN-S cross-section library generation, and, therefore, its application is restricted to systems for which the impact of this parameter is negligible. To update the ARP methodology to account for the water-density effect, a detailed study of the cross-section change with this parameter was performed with an 8 x 8 (General Electric) BWR assembly

  5. Utilization of the RELAP4/MOD5/SAS code version in loss of coolant accident in the Angra 1 nuclear power station

    International Nuclear Information System (INIS)

    Sabundjian, G.; Freitas, R.L.

    1991-09-01

    A new version of computer code RELAP4/MOD5 was developed to improve the output. The new version, called RELAP4/MOD5/SAS, prints the main variables in graphical form. In order to check the program, a 36 - volume simulation of the Loss-of-Coolant Accident for Angra - I was performed and the results compared to those of a existing 44 - volume simulation showed a satisfactory agreement with a substantial reduction in computing time. (author)

  6. Mixed Connective Tissue Disease

    Science.gov (United States)

    Mixed connective tissue disease Overview Mixed connective tissue disease has signs and symptoms of a combination of disorders — primarily lupus, scleroderma and polymyositis. For this reason, mixed connective tissue disease ...

  7. Fluid mixing III

    International Nuclear Information System (INIS)

    Harnby, N.

    1988-01-01

    Covering all aspects of mixing, this work presents research and developments in industrial applications, flow patterns and mixture analysis, mixing of solids into liquids, and mixing of gases into liquids

  8. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  9. SEPARATION ANXIETY SYNDROME (SAS IN DOGS FROM FERNANDOPOLIS, SP, REFERRED TO UNICASTELO VETERINARY HOSPITAL SÍNDROME DA ANSIEDADE DE SEPARAÇÃO (SAS EM CÃES ATENDIDOS NO HOSPITAL VETERINÁRIO DA UNICASTELO, FERNANDÓPOLIS, SP

    Directory of Open Access Journals (Sweden)

    Adriana Alonso Novais

    2010-04-01

    Full Text Available The separation anxiety syndrome (SAS is defined by a group of altered behaviors showed by dogs when they are left alone, contributing for the most common behavior problems in this specie. The basic clinical signs of SAS are the following: distress vocalization (whining, barking, howling, destructiveness and house soiling. SAS reduce the animal’s life quality and is a frequent cause of abandonment and euthanasia of these dogs. The goal of this research was to verify the occurrence of SAS in dogs from Fernandopolis, SP, referred to the veterinary hospital of Unicastelo, in the period lying between december/2007 and december/2008. Seventy five animals were studied, comprising 30 (40% adult males, 9 (12% young males, 30 (40% adult females and 6 (8% young females. The dogs were evaluated through data given by the owners, according to a behavior questionnaire. From the general studied population, 35 dogs (47% showed distress vocalization, 29 (39% dogs showed micturition at inappropriate places, 17 (23% dogs showed defecation at inappropriate places and 22 (29% showed destructiveness during the periods of the owner’s absence. From the obtained results we may conclude the occurrence of SAS in 68% of the studied dogs.

    KEY WORDS: Dogs, animal behavior, behavior disturbances, SAS.

    A síndrome da ansiedade de separação (SAS é definida como o conjunto de comportamentos exibidos por cães quando são deixados sozinhos. É considerada um dos problemas comportamentais mais comuns da espécie. Os sinais clínicos básicos da SAS são vocalização excessiva, destruição de objetos, defecação e micção em locais impróprios, acarretando prejuízos na qualidade de vida dos animais. Sendo uma das causas de abandono e eutanásia desses animais, a SAS foi pesquisada em cães atendidos no Hospital Veterinário da Unicastelo em Fernandópolis, SP, no período de dezembro de 2007 a dezembro de 2008, mediante levantamento realizado em 75

  10. Protocolo de Observação Comportamental - PROC: valores de referência para uma análise quantitativa Behavioral Observation Protocol: reference values for a quantitative analysis

    Directory of Open Access Journals (Sweden)

    Simone Rocha de Vasconcellos Hage

    2012-08-01

    Full Text Available OBJETIVO: obter valores de referência para protocolo de observação comportamental (PROC sobre o desenvolvimento de habilidades comunicativas e de esquemas simbólicos em crianças com desenvolvimento típico de linguagem. MÉTODO: foram avaliadas 44 crianças entre 24 e 47 meses de ambos os gêneros, selecionadas em escolas de educação infantil, por meio de triagem do desenvolvimento global Denver II e questionário com os pais. Todas as crianças foram filmadas durante 30 minutos em interação com um adulto em atividade envolvendo brinquedos. As gravações foram analisadas por meio do PROC. A análise estatística descreveu valores de média, mediana, valores mínimos e máximos. Foi utilizado o teste T de Student para comparação das idades. RESULTADOS: nas habilidades comunicativas, as crianças do estudo mostraram evolução com a idade (média para três e dois anos, respectivamente: 58,12 e 51,44, apesar de não ter sido encontrada diferença estatisticamente significante para as faixas etárias comparadas (p=0,486. Quanto ao item compreensão verbal, as crianças de três anos obtiveram melhor desempenho que as de dois (respectivas médias: 59,41 e 50,70, havendo diferença estatisticamente significante (p=0,0000020. Em relação ao item aspectos do desenvolvimento cognitivo, as crianças de três anos apresentaram melhor desempenho em comparação com as de dois (respectivas médias: 44,53 e 31,96, havendo diferença estatisticamente significante entre as pontuações obtidas (p=0,00364, mostrando que as crianças evoluem na hierarquia do simbolismo. CONCLUSÃO: a obtenção de valores de referência para o PROC veio combinar análise qualitativa e quantitativa, contribuindo, além do diagnóstico, para o acompanhamento objetivo de processos terapêuticos.PURPOSE: to obtain reference values for behavioral observation protocol on the development of communicative and symbolic schemes of children with typical language development

  11. Inorganic Species Behaviour in Thermochemical Processes for Energy Biomass Valorisation Comportement des espèces inorganiques dans les procédés thermochimiques de valorisation énergétique de la biomasse

    Directory of Open Access Journals (Sweden)

    Froment K.

    2013-09-01

    difficulties (corrosion, fouling, etc.: a detailed summary of the specific behaviour of the inorganic compounds in biomass thermal conversion facilities will be given, going from the description of inorganic species included in biomass up to the prevention and the solution, as far as possible. The following topics will therefore be developed: inventory of inorganic species in different biomasses; general review of the inorganic speciation during thermal conversion processes; technological barriers to overcome for economic and technological process improvements; specific aspects related to inorganic species behaviour investigated at CEA: inorganic species release and condensation; aerosol behaviour and deposits; hot particles filtration; slag formation and interactions with reactor wall. Les espèces inorganiques de la biomasse (bois, déchets agricoles, déchets ménagers voire boues d’épuration présentent un large spectre en compositions et quantités, dépendant de l’origine de la biomasse (nature, lieux et conditions de sa croissance, etc.. Les différents procédés de conversion (combustion, pyrolyse, gazéification, etc. et les différentes technologies associées (fours à grille, lits fixes ou fluidisés, réacteurs à flux entraînés, etc. utilisant l’énergie de la biomasse, fournissent des conditions opératoires très variées en atmosphère, température, pression, etc. Au cours de chacun de ces procédés thermiques de conversion, en fonction de la composition initiale de la biomasse, de l’atmosphère et la température du procédé (la pression est un paramètre de second ordre par rapport aux précédents, certaines espèces inorganiques réagissent pour former des composés liquides ou gazeux, seuls ou combinés à d’autres espèces : celles-ci peuvent être soit piégées à différents endroits dans le procédé, soit relâchées avec le gaz. Les interactions potentielles de ces espèces inorganiques avec les parois des réacteurs, les mat

  12. [Mixed depressions: clinical and neurophysiological biomarkers].

    Science.gov (United States)

    Micoulaud Franchi, J-A; Geoffroy, P-A; Vion-Dury, J; Balzani, C; Belzeaux, R; Maurel, M; Cermolacce, M; Fakra, E; Azorin, J-M

    2013-12-01

    Epidemiological studies of major depressive episodes (MDE) highlighted the frequent association of symptoms or signs of mania or hypomania with depressive syndrome. Beyond the strict definition of DSM-IV, epidemiological recognition of a subset of MDE characterized by the presence of symptoms or signs of the opposite polarity is clinically important because it is associated with pejorative prognosis and therapeutic response compared to the subgroup of "typical MDE". The development of DSM-5 took into account the epidemiological data. DSM-5 opted for a more dimensional perspective in implementing the concept of "mixed features" from an "episode" to a "specification" of mood disorder. As outlined in the DSM-5: "Mixed features associated with a major depressive episode have been found to be a significant risk factor for the development of bipolar I and II disorder. As a result, it is clinically useful to note the presence of this specifier for treatment planning and monitoring of response to therapeutic". However, the mixed features are sometimes difficult to identify, and neurophysiological biomarkers would be useful to make a more specific diagnosis. Two neurophysiological models make it possible to better understand MDE with mixed features : i) the emotional regulation model that highlights a tendency to hyper-reactive and unstable emotion response, and ii) the vigilance regulation model that highlights, through EEG recording, a tendency to unstable vigilance. Further research is required to better understand relationships between these two models. These models provide the opportunity of a neurophysiological framework to better understand the mixed features associated with MDE and to identify potential neurophysiological biomarkers to guide therapeutic strategies. Copyright © 2013 L’Encéphale. Published by Elsevier Masson SAS.. All rights reserved.

  13. Distribution of sasX, pvl, and qacA/B genes in epidemic methicillin-resistant Staphylococcus aureus strains isolated from East China

    Directory of Open Access Journals (Sweden)

    Kong H

    2018-01-01

    Full Text Available Haishen Kong,1,2 Lingmei Fang,3 Rujin Jiang,4 Jixiang Tong2 1State Key Laboratory for Diagnosis and Treatment of Infectious Diseases, Collaborative Innovation Center for Diagnosis and Treatment of Infectious Diseases, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 2Key Laboratory of Clinical In Vitro Diagnostic Techniques of Zhejiang Province, Department of Laboratory Medicine, First Affiliated Hospital, College of Medicine, Zhejiang University, Hangzhou, China; 3Clinical Laboratory, Chunan First People’s Hospital, Zhejiang Province People’s Hospital Chunan Branch, Hangzhou, China; 4Clinical Laboratory, Yuhang Hospital of Traditional Chinese Medicine, Hangzhou, China Background: Methicillin-resistant Staphylococcus aureus (MRSA is a major nosocomial pathogen. Various virulence and antiseptic-resistant factors increase the pathogenicity of MRSA strains and allow for increased infection rates.Purpose: The purpose of this study was to investigate the prevalence and distribution of virulence-associated and antiseptic-resistant genes from epidemic MRSA strains isolated from East China.Methods: A newly designed multiplex PCR assay was used to assess whether the virulence-associated genes sasX and pvl and the chlorhexidine tolerance gene qacA/B were present in 189 clinical isolates of MRSA. Multilocus sequence typing (MLST and Staphylococcal protein A (spa typing of these isolates were also performed. The frequency of these genes in isolates with epidemic sequence types (STs was investigated. Results: Twenty STs and 36 spa types with five epidemic clones (ST5-t311, ST59-t437, ST5-t002, ST239-t030, and ST239-t037 were identified. The prevalence of sasX, pvl, and qacA/B in all isolates was 5.8%, 10.1%, and 20.1%, respectively. The prevalences of these genes in isolates with ST5, ST59, ST239, and other ST genetic backgrounds were all significantly different (P<0.001. Isolates that had the highest frequency of sas

  14. Mixing ratio sensor of alcohol mixed fuel

    Energy Technology Data Exchange (ETDEWEB)

    Miyata, Shigeru; Matsubara, Yoshihiro

    1987-08-07

    In order to improve combustion efficiency of an internal combustion engine using gasoline-alcohol mixed fuel and to reduce harmful substance in its exhaust gas, it is necessary to control strictly the air-fuel ratio to be supplied and the ignition timing and change the condition of control depending upon the mixing ratio of the mixed fuel. In order to detect the mixing ratio of the mixed fuel, the above mixing ratio has so far been detected by casting a ray of light to the mixed fuel and utilizing a change of critical angle associated with the change of the composition of the fluid of the mixed fuel. However, in case when a light emitting diode is used for the light source above, two kinds of sensors are further needed. Concerning the two kinds of sensors above, this invention offers a mixing ratio sensor for the alcohol mixed fuel which can abolish a temperature sensor to detect the environmental temperature by making a single compensatory light receiving element deal with the compensation of the amount of light emission of the light emitting element due to the temperature change and the compensation of the critical angle caused by the temperature change. (6 figs)

  15. Continuous mixing of solids

    NARCIS (Netherlands)

    Raouf, M.S.

    1963-01-01

    The most important literature on theoretical aspects of mixing solids was reviewed.

    Only when the mixed materials showed no segregation it was possible to analyse the mixing process quantitatively. In this case the mixture could be described by the 'χ' Square test. Longitudinal mixing could be

  16. European mixed forests

    DEFF Research Database (Denmark)

    Bravo-Oviedo, Andres; Pretzsch, Hans; Ammer, Christian

    2014-01-01

    Aim of study: We aim at (i) developing a reference definition of mixed forests in order to harmonize comparative research in mixed forests and (ii) review the research perspectives in mixed forests. Area of study: The definition is developed in Europe but can be tested worldwide. Material...... and Methods: Review of existent definitions of mixed forests based and literature review encompassing dynamics, management and economic valuation of mixed forests. Main results: A mixed forest is defined as a forest unit, excluding linear formations, where at least two tree species coexist at any...... density in mixed forests, (iii) conversion of monocultures to mixed-species forest and (iv) economic valuation of ecosystem services provided by mixed forests. Research highlights: The definition is considered a high-level one which encompasses previous attempts to define mixed forests. Current fields...

  17. Assessment of SFR reactor safety issues: Part II: Analysis results of ULOF transients imposed on a variety of different innovative core designs with SAS-SFR

    Energy Technology Data Exchange (ETDEWEB)

    Kruessmann, R., E-mail: regina.kruessmann@kit.edu [Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology INR, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Ponomarev, A.; Pfrang, W.; Struwe, D. [Karlsruhe Institute of Technology, Institute of Neutron Physics and Reactor Technology INR, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Champigny, J.; Carluec, B. [AREVA, 10, rue J. Récamier, 69456 Lyon Cedex 06 (France); Schmitt, D.; Verwaerde, D. [EDF R& D, 1 avenue du général de Gaulle, 92140 Clamart (France)

    2015-04-15

    Highlights: • Comparison of different core designs for a sodium-cooled fast reactor. • Safety assessment with the code system SAS-SFR. • Unprotected Loss of Flow (ULOF) scenario. • Sodium boiling and core melting cannot be avoided. • A net negative Na void effect provides more grace time prior to local SA destruction. - Abstract: In the framework of cooperation agreements between KIT-INR and AREVA SAS NP as well as between KIT-INR and EDF R&D in the years 2008–2013, the evaluation of severe transient behavior in sodium-cooled fast reactors (SFRs) was investigated. In Part I of this contribution, the efficiency of newly conceived prevention and mitigation measures was investigated for unprotected loss-of-flow (ULOF), unprotected loss-of-heat-sink (ULOHS) and the unprotected transient-overpower (UTOP) transients. In this second part, consequence analyses were performed for the initiation phase of different unprotected loss-of-flow (ULOF) scenarios imposed on a variety of different core design options of SFRs. The code system SAS-SFR was used for this purpose. Results of analyses for cases postulating unavailability of prevention measures as shut-down systems, passive and/or active additional devices show that entering into an energetic power excursion as a consequence of the initiation phase of a ULOF cannot be avoided for those core designs with a cumulative void reactivity feedback larger than zero. However, even for core designs aiming at values of the void reactivity less than zero it is difficult to find system design characteristics which prevent the transient entering into partial core destruction. Further studies of the transient core and system behavior would require codes dedicated to specific aspects of transition phase analyses and of in-vessel material relocation analyses.

  18. Diagnostico organizacional y formulación del plan estratégico de desarrollo para la empresa WPA Fauna y Ambiente S.A.S

    OpenAIRE

    Garavito Garavito, Gustavo Alfonso

    2017-01-01

    La presente oferta de servicios comprende la elaboración del diagnóstico Organizacional y formulación del plan estratégico de desarrollo para la empresa WPA Fauna y Ambiente S.A.S, utilizando modelos de administración tales como; el modelo Pestel, el modelo de Kast–Rozeinsweig, el modelo de cinco fuerzas de Porter, complementado con un análisis (DOFA) para así, a partir del análisis de los hallazgos formular el plan de desarrollo que permita a la organización enfocarse en una estrategia de me...

  19. Diseño de una estrategia que posicione a Transporte Comercial la Estrella SAS como una empresa mas competitiva en el sector transporte

    OpenAIRE

    Cifuentes Amaya, Mauricio Andrés

    2017-01-01

    La elaboración de este proyecto busca explicar los factores que actualmente afectan al sector transporte (Costos elevados, sobreoferta, chatarrización, fletes elevados, hacinamiento, Etc.) y, a partir de esto, diseñar estrategias que le permitan a la empresa de transporte: TRANSPORTE COMERCIAL LA ESTRELLA SAS, convertirse en una empresa más competitiva dentro del sector en el que se desenvuelve. El planteamiento estratégico estudiado se fundamenta en el modelo de las 5 fuerzas de Michael P...

  20. Planteamiento estratégico de Pronalfo S.A.S. y Reingeniería del Proceso de Producción

    OpenAIRE

    Fajardo Castillo, Erika Esperanza; Quiroga Arguello, Luz Andrea

    2012-01-01

    Pronalfo S.A.S es una empresa dedicada a la elaboración de núcleos balanceados como materia prima para la alimentación animal, fue creada hace 7 años y se encuentra en la etapa de crecimiento y posicionamiento en el mercado. Es necesario establecer el planeamiento estratégico mediante la definición de misión, visión, objetivos y estrategias, para tener clara su razón de ser y proyectándose al futuro estableciendo una ventaja competitiva mediante estrategias que le permitan mantenerse en ...

  1. Diseño de un plan estratégico en el Instituto de Enfermedades Autoinmunes Renato Guzmán - IDEARG S.A.S.

    OpenAIRE

    Jiménez Serrano, Lorena; Ortegon Lancheros, Carolina

    2012-01-01

    IDEARG S.A.S es una Institución Prestadora de Servicios de Salud dedicada a la atención de pacientes con enfermedades autoinmunes. Dentro de su ordenación se encuentra una planta de personal organizada y comprometida con el progreso de la empresa. Sin embargo, existe una sentida necesidad de implementar estrategias que permitan el fortalecimiento interno de la institución y su posicionamiento en el mercado como una de las empresas de mayor prestigio en su campo de acción. Resulta oportuno...

  2. Mixing ratio sensor for alcohol mixed fuel

    Energy Technology Data Exchange (ETDEWEB)

    Miyata, Shigeru; Matsubara, Yoshihiro

    1987-08-24

    In order to improve the combustion efficiency of an internal combustion engine using gasoline-alcohol mixed fuel and to reduce harmful substance in its exhaust gas, it is necessary to control strictly the air-fuel ratio to be supplied and the ignition timing. In order to detect the mixing ratio of the mixed fuel, a mixing ratio sensor has so far been proposed to detect the above mixing ratio by casting a ray of light to the mixed fuel and utilizing a change of critical angle associated with the change of the composition of the fluid of the mixed fuel. However, because of the arrangement of its transparent substance in the fuel passage with the sealing material in between, this sensor invited the leakage of the fluid due to deterioration of the sealing material, etc. and its cost became high because of too many parts to be assembled. In view of the above, in order to reduce the number of parts, to lower the cost of parts and the assembling cost and to secure no fluid leakage from the fuel passage, this invention formed the above fuel passage and the above transparent substance both concerning the above mixing ratio sensor in an integrated manner using light transmitting resin. (3 figs)

  3. Procès inquisitorial contra el castellà d'Amposta Fra Pedro Roiç de Moros a la cúria pontificia del papa Benet XIII (I414-1418

    Directory of Open Access Journals (Sweden)

    Alanyà i Roig, Josep

    2002-06-01

    Full Text Available The Arxiu de la Corona d'Aragó in Barcelona houses the original commital proceedings instituted by a court of cardinals set up by pope Benedict XIII in the year 1414 and teh trial itself of the lord of Amposta, Fra Pedro Roiç de Moros, knight of the Order of St. John of Jerusalem, who had been charged with indictable offences—concubinage, robbery, housing apostates, oath breaking and counterfeiting money, mismanagement of the Castlery's assets, excesses against his vassals, wasteful use of assets, dereliction and property abandonment— of which he was found guilty, and thereafter sentenced to losing the dignity of his lordship. Roiç de Moros appealed to the Council of Constance as well as to pope Martin V. It would be to no avail. Roiç de Moros paid a very high price for choosing to support count Jaume d'Urgell and deciding to oppose Ferran dAntequera and the policies of pope Benedict XIII. The follow up and analysis of the court´s records are very interesting for their human variety and interesting informations about fortresses, houses, barns, treaures and services there were in different locations of the Castlery of Amposta, such as Batea, Gandesa, Miravet, Ulldecona, Ascó and other towns and villages along the Ribera d´Ebre. The whole criminal prosecution bears a very peculiar historic interest mainly because the protagonists, the court procedures, and their causes are the link between the Interregnum in the Aragonese Crown and the fìnal days of the Western Schism.

    A l'Arxiu de la Corona d'Aragó de Barcelona es conserva el procés original instruït per un tribunal de cardenals creat pel papa Benet XIII l'any 1414 per jutjar el Castella d'Amposta, l'hospitaler Fra Pedro Roiç de Moros, acusat de crims greus —concubinat, bandositats, recepció d’apòstates, perjuri i fabricació de moneda falsa, mala administració dels bens de la Castellania, comissió d'excessos contra els seus vassalls, dilapidado de bens i abando

  4. Optimisation énergétique des procédés de séparation en raffinage et en traitement de gaz naturel Optimal Use of Energy in Separation Processes for Refining and Natural Gas Treatment

    Directory of Open Access Journals (Sweden)

    Rojey A.

    2006-11-01

    Full Text Available Cet article présente une méthode d'optimisation des procédés de séparation basée sur une analyse thermodynamique. Cette analyse s'appuie sur un bilan exergétique qui est établi dans le cas général d'un système quelconque opérant en régime permanent. Les facteurs qui conditionnent le rendement exergétique d'un procédé de séparation sont ensuite examinés. Il en résulte une méthode d'optimisation basée sur une réduction des irréversibilités thermodynamiques. Des exemples concrets d'application en raffinage et en traitement de gaz naturel sont présentés, et on montre comment cette analyse peut déboucher sur la conception de procédés innovants. The optimization of separation units in refining and natural-gas processing must take into consideration new needs and constraints that may seem incompatible. New installations must be designed not only on the basis of energy optimization but also by seeking to minimize investments and to respect new rules concerning environmental protection. The optimization described in this article is based on a thermodynamic analysis of different material and energy exchanges, The energybalance provides a suitable basis for making this analysis. It leads to the defining of an exergy efficiency that is all the higher as the thermodynamic irreversibilities are reduced, and that tends toward one for an ideal reversible system. For a separation process, a separation exergyterm is defined that correspond to the minimum separation work . Distillation is the basic separation operation. The exergy efficiency of this operation is low, and we show that, even in a relatively favorable cas, it is no greater than a value of about 6%. For an atmospheric distillation operation of crude oil, the exergy efficiency is about 4%. This overall exergy efficiency is the product of an external exergy efficiency and an internal exergy efficiency. The external exergy efficiency can be improved by better thermal

  5. Déconstruction-reconstruction identitaire et poétique de l’altérité dans Le procès-verbal de J-M G. Le Clézio

    Directory of Open Access Journals (Sweden)

    Abdoulaye Diouf

    2016-12-01

    Full Text Available En partant du double mouvement rhizomatique de la « déterritorialisation » et de la « reterritorialisation », cet article se propose d’étudier la conception dynamique de l’identité dans Le procès-verbal de Jean-Marie Gustave Le Clézio (1963. Pour cela, il explore, d’une part, le processus graduel de déconstruction identitaire du héros du roman (marginalité, nudité, métamorphose par le biais de la médiation altéritaire – dans le sens d’un rapport au monde et à l’Autre – à partir de laquelle se reconstruit une nouvelle identité transcendante loin de tout essentialisme. D’autre part, il analyse les différentes stratégies de mise en altérité qui montrent au passage, avec sa théorie de l’« extase matérialiste » et le principe de l’identification qui la sous-tend, que l’être ne s’arrête pas à l’humain chez Le Clézio. Starting from the dual rhizome-like movement of the “deterritorialization” and “reterritorialization”, this article proposes to study the dynamic concept of identity in Le procès-verbal by Jean-Marie Gustave Le Clézio (1963. For this, it explores, firstly, the gradual process of identity deconstruction of the novel’s hero (marginality, nudity, metamorphosis through the othering mediation - in the sense of a relationship to the world and the Other - from which is rebuilt a new transcendent identity away from all essentialism. Furthermore, it analyzes the different otherness implementation strategies that show the way, with his theory of “materialistic ecstasy” and the principle of identification which underlies it, according to which being goes beyond humans for Le Clézio.

  6. Le procédé de blanchiment dans les ateliers monétaires français au XV-XVIème siècle: approche archéométrique et expérimentale

    Directory of Open Access Journals (Sweden)

    Téreygeol, Florian

    2011-12-01

    Full Text Available In the late nineties, excavations in La Rochelle (France have discovered the remains of a royal mint of the sixteenth century. This discovery enabled the collection of artefacts directly related to the manufacture of coins. The exceptional corpus gathered is the subject of a study of the chaîne opératoire of coining in the medieval time. Special attention is paid to an operation which takes place before the strike: the blanching of blanks. Well documented in ancient times, the samples from La Rochelle offer the opportunity to study this process during the medieval period and in a royal mint. In addition, thanks to reconstitution experiments, it is possible to define a reaction mechanism that helps to understand our historical observations.[fr] À la fin des années quatre-vingtdix, des fouilles menées à La Rochelle (France ont permis de mettre au jour les vestiges d’un atelier monétaire royal du XVIe siècle. Cette découverte a permis la collecte de matériel directement liée à la fabrication monétaire. Le corpus exceptionnel rassemblé est l’objet d’une étude qui vise à mettre en évidence la chaîne opératoire de fabrication de monnaie à l’époque considérée. Un intérêt particulier est porté à une technique d’argenture qui intervient avant la frappe des monnaies, le blanchiment des flans. Bien documenté pour les périodes antiques, le matériel de La Rochelle offre la possibilité de mettre en évidence ce procédé pour une période plus récente et dans un cadre officiel. De plus, à partir d’expériences de reconstitution, il a été possible de proposer un mécanisme réactionnel. Les hypothèses proposées permettent alors de dégager des implications historiques dans le procédé de fabrication.

  7. Cloning, overexpression, purification, crystallization and preliminary X-ray diffraction analysis of an inositol monophosphatase family protein (SAS2203) from Staphylococcus aureus MSSA476

    International Nuclear Information System (INIS)

    Bhattacharyya, Sudipta; Dutta, Debajyoti; Ghosh, Ananta Kumar; Das, Amit Kumar

    2011-01-01

    The cloning, overexpression, purification, crystallization and preliminary X-ray diffraction analysis of an inositol monophosphatase family protein (SAS2203) from S. aureus MSSA476 is reported. The gene product of the sas2203 ORF of Staphylococcus aureus MSSA476 encodes a 30 kDa molecular-weight protein with a high sequence resemblance (29% identity) to tetrameric inositol monophosphatase from Thermotoga maritima. The protein was cloned, expressed, purified to homogeneity and crystallized. Crystals appeared in several conditions and good diffraction-quality crystals were obtained from 0.2 M Li 2 SO 4 , 20% PEG 3350, 0.1 M HEPES pH 7.0 using the sitting-drop vapour-diffusion method. A complete diffraction data set was collected to 2.6 Å resolution using a Rigaku MicroMax-007 HF Cu Kα X-ray generator and a Rigaku R-AXIS IV ++ detector. The diffraction data were consistent with the orthorhombic space group P2 1 2 1 2 1 , with unit-cell parameters a = 49.98, b = 68.35, c = 143.79 Å, α = β = γ = 90°, and the crystal contained two molecules in the asymmetric unit

  8. The zebrafish maternal-effect gene cellular atoll encodes the centriolar component sas-6 and defects in its paternal function promote whole genome duplication.

    Science.gov (United States)

    Yabe, Taijiro; Ge, Xiaoyan; Pelegri, Francisco

    2007-12-01

    A female-sterile zebrafish maternal-effect mutation in cellular atoll (cea) results in defects in the initiation of cell division starting at the second cell division cycle. This phenomenon is caused by defects in centrosome duplication, which in turn affect the formation of a bipolar spindle. We show that cea encodes the centriolar coiled-coil protein Sas-6, and that zebrafish Cea/Sas-6 protein localizes to centrosomes. cea also has a genetic paternal contribution, which when mutated results in an arrested first cell division followed by normal cleavage. Our data supports the idea that, in zebrafish, paternally inherited centrosomes are required for the first cell division while maternally derived factors are required for centrosomal duplication and cell divisions in subsequent cell cycles. DNA synthesis ensues in the absence of centrosome duplication, and the one-cycle delay in the first cell division caused by cea mutant sperm leads to whole genome duplication. We discuss the potential implications of these findings with regards to the origin of polyploidization in animal species. In addition, the uncoupling of developmental time and cell division count caused by the cea mutation suggests the presence of a time window, normally corresponding to the first two cell cycles, which is permissive for germ plasm recruitment.

  9. Relap4/SAS/Mod5 - A version of Relap4/Mod 5 adapted to IPEN/CNEN - SP computer center

    International Nuclear Information System (INIS)

    Sabundjian, G.

    1988-04-01

    In order to improve the safety of nuclear reactor power plants several computer codes have been developed in the area of thermal - hydraulics accident analysis. Among the public-available codes, RELAP4, developed by Aerojet Nuclear Company, has been the most popular one. RELAP4 has produced satisfactory results when compared to most of the available experimental data. The purposes of the present work are: optimization of RELAP4 output and messages by writing there information in temporary records, - display of RELAP4 results in graphical form through the printer. The sample problem consists on a simplified model of a 150 MW (e) PWR whose primary circuit is simulated by 6 volumes, 8 junctions and 1 heat slab. This new version of RELAP4 (named RELAP4/SAS/MOD5) have produced results which show that the above mentioned purposes have been reached. Obviously the graphical output by RELAP4/SAS/MOD5 favors the interpretation of results by the user. (author) [pt

  10. Arctic Mixed Layer Dynamics

    National Research Council Canada - National Science Library

    Morison, James

    2003-01-01

    .... Over the years we have sought to understand the heat and mass balance of the mixed layer, marginal ice zone processes, the Arctic internal wave and mixing environment, summer and winter leads, and convection...

  11. SPORT MARKETING MIX STRATEGIES

    OpenAIRE

    Alexandru Lucian MIHAI

    2013-01-01

    This paper presents a brief overview of a significant element of the sport marketing management model called the marketing mix. The marketing mix is crucial because it defines the sport business, and much of the sport marketer’s time is spent on various functions within the marketing mix. The marketing mix is the strategic combination of the product, price, place and promotion elements. These elements are typically called the four Ps of marketing. Decisions and strategies for each are importa...

  12. THE MARKETING MIX OPTIMIZATION

    OpenAIRE

    SABOU FELICIA

    2014-01-01

    The paper presents the marketing mix and the necessity of the marketing mix optimization. In the marketing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to opti...

  13. Mixed methods research.

    Science.gov (United States)

    Halcomb, Elizabeth; Hickman, Louise

    2015-04-08

    Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

  14. Cerebral scintigraphy by {sup 99m}Tc-HMPAO in sleep apnea syndromes (SAS) during the wakeful state; Scintigraphie cerebrale au Tc99m-HMPAO dans les syndromes d`apnees du sommeil (SAS) pendant l`etat de veille

    Energy Technology Data Exchange (ETDEWEB)

    Tainturier, C.; Benamor, M.; Hausser-Hauw, C.; Rakotonanahary, D.; Fleury, B. [CMC FOCH 92150 SURESNES (France)

    1997-12-31

    The SAS is associated to cerebral hemodynamic modifications and to a high frequency of cerebro-vascular accidents. The aim of this study was to verify, during wakeful state, the cerebral hemodynamic in 14 patients afflicted with SAS of various intensity (Apnea Index = 5-120/h). 555 MBq of {sup 99m}Tc-HMPAO were injected in patients maintained awake. The images were obtained 20 minutes after injection by mean of a double-head chamber equipped with fan-beam collimators. They were interpreted visually by two independent readers. Anomalies of cerebral fixation were observed in 12/14 patients. They were small sores of diffuse hypo-fixations, with a `riddly` aspect (4 cases), sores of bi-temporal hypo-fixation with a right- or left- hemispheric predominance (6 cases), or right fronto-temporal hypo-fixations (2 cases). The cerebral fixation anomalies were reported in the SASs. Ficker et al (1997) have shown in-sleep frontal hypo-perfusions in 5/14 apneic patients, reversible under continuous positive airing pressure (CPAP). In conclusion, anomalies of cerebral fixation exist in SAS-carrying patients, even in the wakeful state. Questions about hypoperfusion, pre-lacunar syndrome, atrophy still remain. A check of this study is planned after the CPAP treatment to determine the hemodynamic or anatomic origin and the anomaly reversibility

  15. Mixing vane grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Galbraith, K.P.

    1978-01-01

    An improved mixing vane grid spacer having enhanced flow mixing capability by virtue of mixing vanes being positioned at welded intersecting joints of the spacer wherein each mixing vane has an opening or window formed therein substantially directly over the welded joint to provide improved flow mixing capability is described. Some of the vanes are slotted, depending on their particular location in the spacers. The intersecting joints are welded by initially providing consumable tabs at and within each window, which are consumed during the welding of the spacer joints

  16. VnpProcServiceV2

    Data.gov (United States)

    Department of Veterans Affairs — Common web service for VONAPP Finds all the vnp process information, find vnp process information by primary key, create vnp process information, update vnp process...

  17. Interprofessional education: Partnerships in the educational proc.

    Science.gov (United States)

    Bressler, Toby; Persico, Lori

    2016-01-01

    The curriculum for healthcare professionals is primarily dictated by the demands of the specific discipline. Detailed curricula are essential to develop professional healthcare providers such as nurses, physicians and pharmacists. Traditional educational methods created a system or process where professionals operate in isolation from each other. A siloed structure inhibits effective communication, patient-centered care and safety. Today the focus in healthcare has shifted towards a more patient-centeredness approach using interprofessional collaboration to achieve optimal patient outcomes. Nurses are at the forefront of patient care and play a key role in quality patient care and improved patient outcomes. Interprofessional education is one type of academic strategy that nursing educators can incorporate into educational curricula. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Characteristic mixing triangles in the Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Varkey, M.J.; Sastry, J.S.

    stream_size 4 stream_content_type text/plain stream_name Phys_Process_Indian_Sea_Proc_1_1992_47.pdf.txt stream_source_info Phys_Process_Indian_Sea_Proc_1_1992_47.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

  19. Neutron and X-ray small angle scattering (S.A.S.) study of the amorphous alloy Tbsub(.25)Cusub(.75)

    International Nuclear Information System (INIS)

    Boucher, B.

    1980-07-01

    The magnetic properties of amorphous alloys REsub(x) Msub(x-1) (R.E.=heavy rare earths, M=Cu, Ag, Au) have been widely studied. They are of the speromagnetic type for x>=0.33 and are mictomagnetic for x -12 cm). Also the atomic volume of Terbium (approximately 33 A 3 ) is almost three times that of Copper (11.8 A 3 ) and Cu is less absorbant than Ag or Au. Tb alloys exhibit high magnetic ordering temperatures and important moments in contrast to the majority of other alloys of the same family. One inconvenience with Terbium, however, is the large (X-ray) fluorescence (lambda Cu). In order to confirm some interpretations of S.A.S., we were obliged to determine some physical parameters such as the density and porosity and to examine the sample with microscope. These results are also given here

  20. How to Deal with Interval-Censored Data Practically while Assessing the Progression-Free Survival: A Step-by-Step Guide Using SAS and R Software.

    Science.gov (United States)

    Dugué, Audrey Emmanuelle; Pulido, Marina; Chabaud, Sylvie; Belin, Lisa; Gal, Jocelyn

    2016-12-01

    We describe how to estimate progression-free survival while dealing with interval-censored data in the setting of clinical trials in oncology. Three procedures with SAS and R statistical software are described: one allowing for a nonparametric maximum likelihood estimation of the survival curve using the EM-ICM (Expectation and Maximization-Iterative Convex Minorant) algorithm as described by Wellner and Zhan in 1997; a sensitivity analysis procedure in which the progression time is assigned (i) at the midpoint, (ii) at the upper limit (reflecting the standard analysis when the progression time is assigned at the first radiologic exam showing progressive disease), or (iii) at the lower limit of the censoring interval; and finally, two multiple imputations are described considering a uniform or the nonparametric maximum likelihood estimation (NPMLE) distribution. Clin Cancer Res; 22(23); 5629-35. ©2016 AACR. ©2016 American Association for Cancer Research.

  1. Análisis de las causas de rotación de personal de la empresa Holcrest S.A.S

    OpenAIRE

    Domínguez Olaya, María Katherine

    2015-01-01

    La retención del personal es una parte importante de los esfuerzos del área de recursos humanos y de la organización en general, ya que la desvinculación representa costos y daño de la imagen organizacional. Es así como el estudio y análisis de la retención de personal se ha convertido en parte de la gestión organizacional. Con la presente investigación se busca analizar las causas que inciden en la rotación de personal en la empresa prestadora de servicios del grupo Holcim, Holcrest S.A.S, u...

  2. Impact of sacubitril-valsartan combination in patients with chronic heart failure and sleep apnoea syndrome: the ENTRESTO-SAS study design.

    Science.gov (United States)

    Jaffuel, Dany; Molinari, Nicolas; Berdague, Philippe; Pathak, Atul; Galinier, Michel; Dupuis, Marion; Ricci, Jean-Etienne; Mallet, Jean-Pierre; Bourdin, Arnaud; Roubille, François

    2018-06-01

    Sleep-disordered breathing (SDB) is a highly prevalent co-morbidity in patients with chronic heart failure (CHF) and can play a detrimental role in the pathophysiology course of CHF. However, the best way to manage SDB in CHF remains a matter of debate. Sacubitril-valsartan has been included in the 2016 European Society of Cardiology guidelines as an alternative to angiotensin-converting enzyme inhibitors to further reduce the risk of progression of CHF, CHF hospitalization, and death in ambulatory patients. Sacubitril and valsartan are good candidates for correcting SDB of CHF patients because their known mechanisms of action are likely to counteract the pathophysiology of SDB in CHF. The ENTRESTO-SAS trial is a 3-month, multicentric, prospective, open-label real-life cohort study. Patients eligible for sacubitril-valsartan treatment (i.e. adults with left ventricular ejection fraction ≤35%, who remain symptomatic despite optimal treatment with an angiotensin-converting enzyme inhibitor, a beta-blocker, and a mineralocorticoid receptor antagonist) will be evaluated before and after 3 months of treatment (nocturnal ventilatory polygraphy, echocardiography, laboratory testing, and quality-of-life and SDB questionnaires). The primary outcome is the change in the Apnoea-Hypopnoea Index, before and after 3 months of treatment. One hundred twenty patients are required to detect a significant 20% improvement of the Apnoea-Hypopnoea Index with a power of 90% at an alpha risk of 5%. In the context of the SERVE-HF study, physicians are waiting for new trials and alternative therapies. We sought to assess in the ENTRESTO-SAS trial whether sacubitril-valsartan could improve the outcome of SDB in CHF patients. © 2018 The Authors. ESC Heart Failure published by John Wiley & Sons Ltd on behalf of the European Society of Cardiology.

  3. Fibrinogen species as resolved by HPLC-SAXS data processing within the UltraScan Solution Modeler (US-SOMO) enhanced SAS module.

    Science.gov (United States)

    Brookes, Emre; Pérez, Javier; Cardinali, Barbara; Profumo, Aldo; Vachette, Patrice; Rocco, Mattia

    2013-12-01

    Fibrinogen is a large heterogeneous aggregation/degradation-prone protein playing a central role in blood coagulation and associated pathologies, whose structure is not completely resolved. When a high-molecular-weight fraction was analyzed by size-exclusion high-performance liquid chromatography/small-angle X-ray scattering (HPLC-SAXS), several composite peaks were apparent and because of the stickiness of fibrinogen the analysis was complicated by severe capillary fouling. Novel SAS analysis tools developed as a part of the UltraScan Solution Modeler ( US-SOMO ; http://somo.uthscsa.edu/), an open-source suite of utilities with advanced graphical user interfaces whose initial goal was the hydrodynamic modeling of biomacromolecules, were implemented and applied to this problem. They include the correction of baseline drift due to the accumulation of material on the SAXS capillary walls, and the Gaussian decomposition of non-baseline-resolved HPLC-SAXS elution peaks. It was thus possible to resolve at least two species co-eluting under the fibrinogen main monomer peak, probably resulting from in-column degradation, and two others under an oligomers peak. The overall and cross-sectional radii of gyration, molecular mass and mass/length ratio of all species were determined using the manual or semi-automated procedures available within the US-SOMO SAS module. Differences between monomeric species and linear and sideways oligomers were thus identified and rationalized. This new US-SOMO version additionally contains several computational and graphical tools, implementing functionalities such as the mapping of residues contributing to particular regions of P ( r ), and an advanced module for the comparison of primary I ( q ) versus q data with model curves computed from atomic level structures or bead models. It should be of great help in multi-resolution studies involving hydrodynamics, solution scattering and crystallographic/NMR data.

  4. tran-SAS v1.0: a numerical model to compute catchment-scale hydrologic transport using StorAge Selection functions

    Directory of Open Access Journals (Sweden)

    P. Benettin

    2018-04-01

    Full Text Available This paper presents the tran-SAS package, which includes a set of codes to model solute transport and water residence times through a hydrological system. The model is based on a catchment-scale approach that aims at reproducing the integrated response of the system at one of its outlets. The codes are implemented in MATLAB and are meant to be easy to edit, so that users with minimal programming knowledge can adapt them to the desired application. The problem of large-scale solute transport has both theoretical and practical implications. On the one side, the ability to represent the ensemble of water flow trajectories through a heterogeneous system helps unraveling streamflow generation processes and allows us to make inferences on plant–water interactions. On the other side, transport models are a practical tool that can be used to estimate the persistence of solutes in the environment. The core of the package is based on the implementation of an age master equation (ME, which is solved using general StorAge Selection (SAS functions. The age ME is first converted into a set of ordinary differential equations, each addressing the transport of an individual precipitation input through the catchment, and then it is discretized using an explicit numerical scheme. Results show that the implementation is efficient and allows the model to run in short times. The numerical accuracy is critically evaluated and it is shown to be satisfactory in most cases of hydrologic interest. Additionally, a higher-order implementation is provided within the package to evaluate and, if necessary, to improve the numerical accuracy of the results. The codes can be used to model streamflow age and solute concentration, but a number of additional outputs can be obtained by editing the codes to further advance the ability to understand and model catchment transport processes.

  5. tran-SAS v1.0: a numerical model to compute catchment-scale hydrologic transport using StorAge Selection functions

    Science.gov (United States)

    Benettin, Paolo; Bertuzzo, Enrico

    2018-04-01

    This paper presents the tran-SAS package, which includes a set of codes to model solute transport and water residence times through a hydrological system. The model is based on a catchment-scale approach that aims at reproducing the integrated response of the system at one of its outlets. The codes are implemented in MATLAB and are meant to be easy to edit, so that users with minimal programming knowledge can adapt them to the desired application. The problem of large-scale solute transport has both theoretical and practical implications. On the one side, the ability to represent the ensemble of water flow trajectories through a heterogeneous system helps unraveling streamflow generation processes and allows us to make inferences on plant-water interactions. On the other side, transport models are a practical tool that can be used to estimate the persistence of solutes in the environment. The core of the package is based on the implementation of an age master equation (ME), which is solved using general StorAge Selection (SAS) functions. The age ME is first converted into a set of ordinary differential equations, each addressing the transport of an individual precipitation input through the catchment, and then it is discretized using an explicit numerical scheme. Results show that the implementation is efficient and allows the model to run in short times. The numerical accuracy is critically evaluated and it is shown to be satisfactory in most cases of hydrologic interest. Additionally, a higher-order implementation is provided within the package to evaluate and, if necessary, to improve the numerical accuracy of the results. The codes can be used to model streamflow age and solute concentration, but a number of additional outputs can be obtained by editing the codes to further advance the ability to understand and model catchment transport processes.

  6. MIXED AND MIXING SYSTEMS WORLDWIDE: A PREFACE

    Directory of Open Access Journals (Sweden)

    Seán Patrick Donlan

    2012-09-01

    Full Text Available This issue of the Potchefstroom Electronic Law Journal (South Africa sees thepublication of a selection of articles derived from the Third International Congress ofthe World Society of Mixed Jurisdiction Jurists (WSMJJ. That Congress was held atthe Hebrew University of Jerusalem, Israel in the summer of 2011. It reflected athriving Society consolidating its core scholarship on classical mixed jurisdictions(Israel, Louisiana, the Philippines, Puerto Rico, Quebec, Scotland, and South Africawhile reaching to new horizons (including Cyprus, Hong Kong and Macau, Malta,Nepal, etc. This publication reflects in microcosm the complexity of contemporaryscholarship on mixed and plural legal systems. This complexity is, of course, wellunderstoodby South African jurists whose system is derived both from the dominantEuropean traditions as well as from African customary systems, including both thosethat make up part of the official law of the state as well as those non-state norms thatcontinue to be important in the daily lives of many South Africans.

  7. Hotell Radisson SAS = Radisson SAS Hotel / Inga Raukas

    Index Scriptorium Estoniae

    Raukas, Inga, 1967-

    2001-01-01

    Projekteerija Arhitektuuribüroo Künnapu & Padrik. Arhitektid Vilen Künnapu, Ain Padrik, Eero Palm, Tarmo Maiste. Sisekujundajad Christian Lundwall, Jan Öberg. Konstruktsioonid: Teuvo Meriläinen, Jyrki Rautamäki. Projekt ja hotell valmis 2000. 12 ill.: korruste plaanid, sise- ja välisvaated

  8. Démonstration du procédé IFP de désulfuration des fumées de centrales Demonstration of the Ifp Stack-Gas Desulfurization Process

    Directory of Open Access Journals (Sweden)

    Busson C.

    2006-11-01

    Full Text Available Les produits pétroliers et le charbon continueront à couvrir les besoins énergétiques pendant plusieurs décennies. La pollution par le SOZ, provenant de la combustion de ces combustibles fossiles, devient une préoccupation pour la population et les Pouvoirs publics. La désulfuration des fumées de combustion devrait, à plus ou moins longue échéance, se développer. L'Institut Français du Pétrole (IFP, mettant à profit ses travaux dans le domaine de la désulfuration, a développé un procédé de traitement des fumées. L'IFP, en collaboration avec Électricité de France (EDF, a effectué en 1976 une opération de démonstration à une échelle pilote (30 MW dans la Centrale de Champagne-sur-Oise. Le procédé consiste à éliminer le S02 des fumées par lavage avec une solution ammoniacale, à produire du soufre à partir de la liqueur obtenue et à recycler l'ammoniaque dans l'étape de lavage. Après quelques modifications d'ordre technologique, l'unité de démonstration a fonctionné d'une manière continue pendant une période de trois mois, correspondant à l'objectif fixé. Les résultats obtenus permettent, actuellement, d'envisager une application de cette technique à une échelle de 250 MW. Oil and coal productswill continue to fulfill energy needs for several more decades. Pollution by SO2 coming from the combustion of such fossil fuels is becoming a preoccupation for the population and the public authorities. The desulfurization of combustion fumes should continue ta develop in the more or less long run. Institut Français du Pétrole (IFP has taken advantage of its research in the fixed of desulfurization to develop a stock-gas treating process. In collaboration with Électricite de Fronce (EDF, IFP carried out a demonsiration operation in 1976 on a pilot-plant scale (30MW in a power plant at Champagne-sur-Oise. The process consists in removing S02 from stock gases by scrubbing them with an ammonia solution

  9. MARKETING MIX THEORETICAL ASPECTS

    OpenAIRE

    Margarita Išoraitė

    2016-01-01

    Aim of article is to analyze marketing mix theoretical aspects. The article discusses that marketing mix is one of the main objectives of the marketing mix elements for setting objectives and marketing budget measures. The importance of each element depends not only on the company and its activities, but also on the competition and time. All marketing elements are interrelated and should be seen in the whole of their actions. Some items may have greater importance than others; it depends main...

  10. Protocol Fuel Mix reporting

    International Nuclear Information System (INIS)

    2002-07-01

    The protocol in this document describes a method for an Electricity Distribution Company (EDC) to account for the fuel mix of electricity that it delivers to its customers, based on the best available information. Own production, purchase and sale of electricity, and certificates trading are taken into account. In chapter 2 the actual protocol is outlined. In the appendixes additional (supporting) information is given: (A) Dutch Standard Fuel Mix, 2000; (B) Calculation of the Dutch Standard fuel mix; (C) Procedures to estimate and benchmark the fuel mix; (D) Quality management; (E) External verification; (F) Recommendation for further development of the protocol; (G) Reporting examples

  11. Mixed waste management options

    International Nuclear Information System (INIS)

    Owens, C.B.; Kirner, N.P.

    1992-01-01

    Currently, limited storage and treatment capacity exists for commercial mixed waste streams. No commercial mixed waste disposal is available, and it has been estimated that if and when commercial mixed waste disposal becomes available, the costs will be high. If high disposal fees are imposed, generators may be willing to apply extraordinary treatment or regulatory approaches to properly dispose of their mixed waste. This paper explores the feasibility of several waste management scenarios and management options. Existing data on commercially generated mixed waste streams are used to identify the realm of mixed waste known to be generated. Each waste stream is evaluated from both a regulatory and technical perspective in order to convert the waste into a strictly low-level radioactive or a hazardous waste. Alternative regulatory approaches evaluated in this paper include a delisting petition) no migration petition) and a treatability variance. For each waste stream, potentially available treatment options are identified that could lead to these variances. Waste minimization methodology and storage for decay are also considered. Economic feasibility of each option is discussed broadly. Another option for mixed waste management that is being explored is the feasibility of Department of Energy (DOE) accepting commercial mixed waste for treatment, storage, and disposal. A study has been completed that analyzes DOE treatment capacity in comparison with commercial mixed waste streams. (author)

  12. Mixed Waste Management Facility

    International Nuclear Information System (INIS)

    Brummond, W.; Celeste, J.; Steenhoven, J.

    1993-08-01

    The DOE has developed a National Mixed Waste Strategic Plan which calls for the construction of 2 to 9 mixed waste treatment centers in the Complex in the near future. LLNL is working to establish an integrated mixed waste technology development and demonstration system facility, the Mixed Waste Management Facility (MWMF), to support the DOE National Mixed Waste Strategic Plan. The MWMF will develop, demonstrate, test, and evaluate incinerator-alternatives which will comply with regulations governing the treatment and disposal of organic mixed wastes. LLNL will provide the DOE with engineering data for design and operation of new technologies which can be implemented in their mixed waste treatment centers. MWMF will operate under real production plant conditions and process samples of real LLNL mixed waste. In addition to the destruction of organic mixed wastes, the development and demonstration will include waste feed preparation, material transport systems, aqueous treatment, off-gas treatment, and final forms, thus making it an integrated ''cradle to grave'' demonstration. Technologies from offsite as well as LLNL's will be tested and evaluated when they are ready for a pilot scale demonstration, according to the needs of the DOE

  13. A Study to Develop a Case Mix Model for the Allocation of Impatient Workload for Silas B. Hays Army Community Hospital Fort Ord, California

    Science.gov (United States)

    1987-06-26

    Development Research Department, World Bank, Washington, D.C. Evans, R.G. and H.D. Walker (1972). Information theory and the analysis of hospital cost...system. Medical Care 14: 185-201. Horn, S.D. and D.N. Schumacher (1979). An analysis of case mix complexity using information theory and diagnosis...REL UGT 459 HA 1 1.0 RETINAL PROCEDURES 0.7101 460 HA 3 1.0 OTHER DISORDERS OF JHE EYE AGE 0-17 0.4018 460 HB 7 2.4 T & A PROC EXCEPT TONSILLECTOMY

  14. Mixing of solids in different mixing devices

    Indian Academy of Sciences (India)

    INGRID BAUMAN, DUŠKA ´CURI ´C and MATIJA BOBAN ... whose main cause is the difference in particle size, density shape and resilience. ..... Gyebis J, Katai F 1990 Determination and randomness in mixing of particulate solids, Chem.

  15. Multilevel models applications using SAS

    CERN Document Server

    Wang, Jichuan; Fisher, James F

    2011-01-01

    This book covers a broad range of topics about multilevel modeling. The goal is to help readers to understand the basic concepts, theoretical frameworks, and application methods of multilevel modeling. It is at a level also accessible to non-mathematicians, focusing on the methods and applications of various multilevel models and using the widely used statistical software SAS®. Examples are drawn from analysis of real-world research data.

  16. Laborsalud S.A.S.

    OpenAIRE

    2013-01-01

    Crear una empresa prestadora de servicios integrales en salud ocupacional basados en la legislación vigente y enfocada a la satisfacción de las necesidades de los clientes, que brinde un valor agregado como expertos con un sistema de resultados en línea a través de su página web y amplio portafolio que integre los requerimientos en materia de salud ocupacional y seguridad industrial de las empresas.

  17. Music Mixing Surface

    DEFF Research Database (Denmark)

    Gelineck, Steven; Büchert, Morten; Andersen, Jesper

    2013-01-01

    This paper presents a multi-touch based interface for mixing music. The goal of the interface is to provide users with a more intuitive control of the music mix by implementing the so-called stage metaphor control scheme, which is especially suitable for multi-touch surfaces. Specifically, we...

  18. Warm Mix Asphalt

    Science.gov (United States)

    2009-04-17

    State of Alaska State of Alaska - Warm Mix Project Warm Mix Project: Location - Petersburg, Alaska which is Petersburg, Alaska which is located in the heart of Southeast Alaska located in the heart of Southeast Alaska's Inside Passage at the tip of M...

  19. The Mixed language Debate

    DEFF Research Database (Denmark)

    A range of views on mixed languages and their connections to phenomena such as secret languages, massive borrowing, codeswitching and codemixing, and thier origin.......A range of views on mixed languages and their connections to phenomena such as secret languages, massive borrowing, codeswitching and codemixing, and thier origin....

  20. Passive Mixing inside Microdroplets

    Directory of Open Access Journals (Sweden)

    Chengmin Chen

    2018-04-01

    Full Text Available Droplet-based micromixers are essential units in many microfluidic devices for widespread applications, such as diagnostics and synthesis. The mixers can be either passive or active. When compared to active methods, the passive mixer is widely used because it does not require extra energy input apart from the pump drive. In recent years, several passive droplet-based mixers were developed, where mixing was characterized by both experiments and simulation. A unified physical understanding of both experimental processes and simulation models is beneficial for effectively developing new and efficient mixing techniques. This review covers the state-of-the-art passive droplet-based micromixers in microfluidics, which mainly focuses on three aspects: (1 Mixing parameters and analysis method; (2 Typical mixing element designs and the mixing characters in experiments; and, (3 Comprehensive introduction of numerical models used in microfluidic flow and diffusion.

  1. ADVANCED MIXING MODELS

    International Nuclear Information System (INIS)

    Lee, S; Richard Dimenna, R; David Tamburello, D

    2008-01-01

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and

  2. ADVANCED MIXING MODELS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S; Richard Dimenna, R; David Tamburello, D

    2008-11-13

    The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and

  3. Modélisation du procédé de soudage hybride Arc / Laser par une approche level set application aux toles d'aciers de fortes épaisseurs A level-set approach for the modelling of hybrid arc/laser welding process application for high thickness steel sheets joining

    Directory of Open Access Journals (Sweden)

    Desmaison Olivier

    2013-11-01

    Full Text Available Le procédé de soudage hybride Arc/Laser est une solution aux assemblages difficiles de tôles de fortes épaisseurs. Ce procédé innovant associe deux sources de chaleur : un arc électrique produit par une torche MIG et une source laser placée en amont. Ce couplage améliore le rendement du procédé, la qualité du cordon et les déformations finales. La modélisation de ce procédé par une approche Level Set permet une prédiction du développement du cordon et du champ de température associé. La simulation du soudage multi-passes d'une nuance d'acier 18MnNiMo5 est présentée ici et les résultats sont comparés aux observations expérimentales. The hybrid arc/laser welding process has been developed in order to overcome the difficulties encountered for joining high thickness steel sheets. This innovative process gathers two heat sources: an arc source developed by a MIG torch and a pre-located laser source. This coupling improves the efficiency of the process, the weld bead quality and the final deformations. The Level-Set approach for the modelling of this process enables the prediction of the weld bead development and the temperature field evolution. The simulation of the multi-passes welding of a 18MnNiMo5 steel grade is detailed and the results are compared to the experimental observations.

  4. ADVANCED MIXING MODELS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S; Dimenna, R; Tamburello, D

    2011-02-14

    The process of recovering and processing High Level Waste (HLW) the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four mixers (pumps) located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are typically set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The focus of the present work is to establish mixing criteria applicable to miscible fluids, with an ultimate goal of addressing waste processing in HLW tanks at SRS and quantifying the mixing time required to suspend sludge particles with the submersible jet pump. A single-phase computational fluid dynamics (CFD) approach was taken for the analysis of jet flow patterns with an emphasis on the velocity decay and the turbulent flow evolution for the farfield region from the pump. Literature results for a turbulent jet flow are reviewed, since the decay of the axial jet velocity and the evolution of the jet flow patterns are important phenomena affecting sludge suspension and mixing operations. The work described in this report suggests a basis for further development of the theory leading to the identified mixing indicators, with benchmark analyses demonstrating their consistency with widely accepted correlations. Although the indicators are somewhat generic in nature, they are applied to Savannah River Site (SRS) waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in

  5. THE MARKETING MIX OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    SABOU FELICIA

    2014-02-01

    Full Text Available ing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to optimize the marketing mix, because of how its combines and integrates company policies relating to the product, price, distribution and promotion, depends the success or the failure on its market. The practice has shown that if an element of the marketing mix is wrong implemented, marketing strategies and programs do not achieve their objectives, and the company can not generate the expected profit. To optimize the marketing mix, companies should consider the following issues: the resources (materials, financial and human, which will be properly allocated to all the elements of the marketing mix, the specific marketing tools and the relationship of interdependence of all the methods and tools used to optimize the marketing mix.

  6. The mixing of fluids

    International Nuclear Information System (INIS)

    Ottino, J.M.

    1989-01-01

    What do the eruption of Krakatau, the manufacture of puff pastry and the brightness of stars have in common? Each involves some aspect of mixing. Mixing also plays a critical role in modern technology. Chemical engineers rely on mixing to ensure that substances react properly, to produce polymer blends that exhibit unique properties and to disperse drag-reducing agents in pipelines. Yet in spite of its of its ubiquity in nature and industry, mixing is only imperfectly under-stood. Indeed, investigators cannot even settle on a common terminology: mixing is often referred to as stirring by oceanographers and geophysicists, as blending by polymer engineers and as agitation by process engineers. Regardless of what the process is called, there is little doubt that it is exceedingly complex and is found in a great variety of systems. In constructing a theory of fluid mixing, for example, one has to take into account fluids that can be miscible or partially miscible and reactive or inert, and flows that are slow and orderly or very fast and turbulent. It is therefore not surprising that no single theory can explain all aspect of mixing in fluids and that straightforward computations usually fail to capture all the important details. Still, both physical experiments and computer simulations can provide insight into the mixing process. Over the past several years the authors and his colleague have taken both approaches in an effort to increase understanding of various aspect of the process-particularly of mixing involving slow flows and viscous fluids such as oils

  7. La « Nouvelle Mosquée » d’Alger. Le déroulement d’une procédure constructive au xviie siècle

    Directory of Open Access Journals (Sweden)

    Samia Chergui

    2012-01-01

    Full Text Available « La Nouvelle Mosquée » est érigée, à la fin du xviie siècle, dans la seule perspective de doter le rite hanéfite de sa propre Grande Mosquée. Cette nouvelle édification relève, à l’évidence, d’une procédure collective exceptionnelle, celle qu’entreprend la milice d’Alger, en l’occurrence le corps des janissaires, en puisant dans les fonds des Subul al-Khayrât. L’examen du livre de comptes qu’avait tenu cette institution ḥabûs, responsable de la gestion de la plupart des mosquées hanéfites et de leurs awqâf, aussitôt après le lancement du chantier, a permis de suivre le déroulement des travaux sur une période de presque dix années, soit de 1067/1656-1657 à 1076/1665-1666. Ce rôle de chantier apporte des éclairages significatifs notamment sur la nature, la provenance, la quantité et le coût des matériaux employés à la construction. Ils ne manquent pas non plus de documenter les aspects concernant leur fabrication, voire leur préparation, et quelque rares fois leur mise en œuvre ; une mise en œuvre qui, ici, revient à la dextérité de nombreux hommes, mobilisés dans le cadre corporatif. La comptabilité salariale, tenue en cette occasion, compte d’ailleurs parmi les rares initiatives de gestion qui ont permis, durant au moins une décennie, de consigner les plus amples détails non seulement sur le profil distinctif de l’ensemble de ces intervenants, mais également sur leur origine géographique, voire confessionnelle.

  8. Aplicación de la GTC-34 y GTC-45 en una S.A.S de servicios en HSEQ: Estudio de caso

    Directory of Open Access Journals (Sweden)

    Olga Lucia Díaz Villamizar

    2013-07-01

    Full Text Available The goal of the project was the development of the Occupational Health Program and Risk Factor Outlook based on the Colombian Technical Standards GTC 34 and 45, for a SAS company working on HSEQ solutions. The outlook and the program were based on a diagnosis obtained through a survey filled out by the Manager and by checking the occupational health progress status through a “checklist”. With this information, a risk matrix was applied to each process, which complemented the Occupational Health Program design. Finally, the results of the project were socialized with all employees, and it is expected to be the starting point for the enterprise to build a culture of pre­vention and self-care. The implementation of the Occupational Health Program allows the studied company to comply with the Colombian law in Occupational Health, get the RUC, bid in the public and private sector, and initiate a process of S& S - OHSAS 18001: 07 standards certification.

  9. Guidelines for mixed waste minimization

    International Nuclear Information System (INIS)

    Owens, C.

    1992-02-01

    Currently, there is no commercial mixed waste disposal available in the United States. Storage and treatment for commercial mixed waste is limited. Host States and compacts region officials are encouraging their mixed waste generators to minimize their mixed wastes because of management limitations. This document provides a guide to mixed waste minimization

  10. Idealized mixing impacts

    International Nuclear Information System (INIS)

    Peterson, R.A.

    1999-01-01

    The dispersion of tetraphenylborate in continuous stirred tank reactors plays a significant role in the utility achieved from the tetraphenylborate. Investigating idealized mixing of the materials can illuminate how this dispersion occurs

  11. SPORT MARKETING MIX STRATEGIES

    Directory of Open Access Journals (Sweden)

    Alexandru Lucian MIHAI

    2013-06-01

    Full Text Available This paper presents a brief overview of a significant element of the sport marketing management model called the marketing mix. The marketing mix is crucial because it defines the sport business, and much of the sport marketer’s time is spent on various functions within the marketing mix. The marketing mix is the strategic combination of the product, price, place and promotion elements. These elements are typically called the four Ps of marketing. Decisions and strategies for each are important for the marketer. Information for making educated decisions involving the four Ps comes from the marketing research involving primarily the four Cs - consumer, competitor, company and climate. A critical decision and one of the greatest challenges for the sport business is how to strategically combine the four Ps to best satisfy the consumer, meet company objectives, enhance market position, and enhance competitive advantages.

  12. MARKETING MIX IN SPORT

    OpenAIRE

    Srećko Novaković; Slobodan Živkucin

    2011-01-01

    Marketing mix'' along the term of life cycle has robbed the trademark for the conception of marketing and the market direction of company, corporations and institutions. Essence marketing-mixa is in the simultaneous determining of the target market group of consumer (the buyer) or stays the public and specially prepared and the coordinated impact of elements mixa, and this is the product, price, distributions and graduation ceremonies. Given that is mix combinations of verified variables, com...

  13. Mixed Reality Systems

    OpenAIRE

    Dieter Müller

    2009-01-01

    Currently one of the most challenging aspects of human computer interaction design is the integration of physical and digital worlds in a single environment. This fusion involves the development of "Mixed Reality Systems”, including various technologies from the domains of augmented and virtual reality. In this paper I will present related concepts and discuss lessons learned from our own research and prototype development. Our recent work involves the use of mixed reality (as opposed to ‘pur...

  14. Features of neutrino mixing

    Science.gov (United States)

    Chiu, S. H.; Kuo, T. K.

    2018-03-01

    The elements (squared) of the neutrino mixing matrix are found to satisfy, as functions of the induced mass, a set of differential equations. They show clearly the dominance of pole terms when the neutrino masses "cross." Using the known vacuum mixing parameters as initial conditions, it is found that these equations have very good approximate solutions, for all values of the induced mass. The results are applicable to long baseline experiments.

  15. Development of standardized laboratory methods and quality processes for a phase III study of the RTS, S/AS01 candidate malaria vaccine

    Directory of Open Access Journals (Sweden)

    Carter Terrell

    2011-08-01

    Full Text Available Abstract Background A pivotal phase III study of the RTS,S/AS01 malaria candidate vaccine is ongoing in several research centres across Africa. The development and establishment of quality systems was a requirement for trial conduct to meet international regulatory standards, as well as providing an important capacity strengthening opportunity for study centres. Methods Standardized laboratory methods and quality assurance processes were implemented at each of the study centres, facilitated by funding partners. Results A robust protocol for determination of parasite density based on actual blood cell counts was set up in accordance with World Health Organization recommendations. Automated equipment including haematology and biochemistry analyzers were put in place with standard methods for bedside testing of glycaemia, base excess and lactacidaemia. Facilities for X-rays and basic microbiology testing were also provided or upgraded alongside health care infrastructure in some centres. External quality assurance assessment of all major laboratory methods was established and method qualification by each laboratory demonstrated. The resulting capacity strengthening has ensured laboratory evaluations are conducted locally to the high standards required in clinical trials. Conclusion Major efforts by study centres, together with support from collaborating parties, have allowed standardized methods and robust quality assurance processes to be put in place for the phase III evaluation of the RTS, S/AS01 malaria candidate vaccine. Extensive training programmes, coupled with continuous commitment from research centre staff, have been the key elements behind the successful implementation of quality processes. It is expected these activities will culminate in healthcare benefits for the subjects and communities participating in these trials. Trial registration Clinicaltrials.gov NCT00866619

  16. Hydraulic jett mixing

    International Nuclear Information System (INIS)

    Ackerman, J.R.

    1989-01-01

    Efficient mixing of reactants into a waste stream has always been a problem in that there has been no mixer capable of combining all the elements of enhanced mixing into a single piece of equipment. Through the development of a mixing system for the mining industry to treat acid mine water containing heavy metals, a versatile new hydraulic jetting static mixer has been developed that has no moving parts and a clean bore with no internal components. This paper reports that the main goal of the development of the hydraulic jett mixer was to reduce the size of the tankage required for an acid mine drainage (AMD) treatment plant through development of a static mixing device that could coincidentally aerate the treatment flow. This process equipment being developed would simultaneously adjust the pH and oxidize the metals allowing formation of the hydroxide sludges required for sedimentation and removal of the metals from the treatment stream. In effect, the device eliminates two reaction tanks, the neutralization/mixing tank and the aeration tank

  17. Charm mixing at LHCb

    CERN Document Server

    Di Canto, Angelo

    2013-01-01

    We report a measurement of the time-dependent ratio of $D^0\\to K^+\\pi^-$ to $D^0\\to K^-\\pi^+$ decay rates in $D^{*+}$-tagged events using 1.0\\,fb$^{-1}$ of integrated luminosity recorded by the LHCb experiment. We measure the mixing parameters $x'^2=(-0.9\\pm1.3)\\times10^{-4}$, $y'=(7.2\\pm2.4)\\times10^{-3}$ and the ratio of doubly-Cabibbo-suppressed to Cabibbo-favored decay rates $R_D=(3.52\\pm0.15)\\times10^{-3}$. The result excludes the no-mixing hypothesis with a probability corresponding to 9.1 standard deviations and represents the first observation of charm mixing from a single measurement

  18. Mixed waste: Proceedings

    International Nuclear Information System (INIS)

    Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E.

    1993-01-01

    This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base

  19. Mixed waste: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E. [eds.] [Temple Univ., Philadelphia, PA (United States). Dept. of Environmental Safety and Health

    1993-12-31

    This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.

  20. Bimaximal fermion mixing from the quark and leptonic mixing matrices

    International Nuclear Information System (INIS)

    Ohlsson, Tommy

    2005-01-01

    In this Letter, we show how the mixing angles of the standard parameterization add when multiplying the quark and leptonic mixing matrices, i.e., we derive explicit sum rules for the quark and leptonic mixing angles. In this connection, we also discuss other recently proposed sum rules for the mixing angles assuming bimaximal fermion mixing. In addition, we find that the present experimental and phenomenological data of the mixing angles naturally fulfill our sum rules, and thus, give rise to bilarge or bimaximal fermion mixing

  1. Mixed language programming

    International Nuclear Information System (INIS)

    Burow, Burkhard D.

    1996-01-01

    Computing in the next millennium will be using software from this millennium. Programming languages evolve and new ones continue to be created. The use of legacy code demonstrates why some present and future applications may span programming languages. Even a completely new application may mix programming languages, if it allows its components to be more conveniently expressed. Given the need, mixed language programming should be easy and robust. By resolving a variety of difficulties, the well established cfortran.h package provides, the desired convenient interface across the C and Fortran programming languages, as demonstrated using CERN's Book. (author)

  2. Turbulence and Interfacial Mixing

    Energy Technology Data Exchange (ETDEWEB)

    Glimm, James; Li, Xiaolin

    2005-03-15

    The authors study mix from analytical and numerical points of view. These investigations are linked. The analytical studies (in addition to laboratory experiments) provide bench marks for the direct simulation of mix. However, direct simulation is too detailed to be useful and to expensive to be practical. They also consider averaged equations. Here the major issue is the validation of the closure assumptions. They appeal to the direct simulation methods for this step. They have collaborated with several NNSA teams; moreover, Stony Brook alumni (former students, faculty and research collaborators) presently hold staff positions in NNSA laboratories.

  3. Mixed Reality Systems

    Directory of Open Access Journals (Sweden)

    Dieter Müller

    2009-11-01

    Full Text Available Currently one of the most challenging aspects of human computer interaction design is the integration of physical and digital worlds in a single environment. This fusion involves the development of "Mixed Reality Systems”, including various technologies from the domains of augmented and virtual reality. In this paper I will present related concepts and discuss lessons learned from our own research and prototype development. Our recent work involves the use of mixed reality (as opposed to ‘pure’ virtual reality techniques to support seamless collaborative work between remote and hands-on laboratories.

  4. Optimizing the strategic patient mix

    NARCIS (Netherlands)

    Vanberkel, P.T.; Boucherie, Richardus J.; Hans, Elias W.; Hurink, Johann L.

    In this paper we address the decision of choosing a patient mix for a hospital that leads to the most beneficial treatment case mix. We illustrate how capacity, case mix and patient mix decisions are interrelated and how understanding this complex relationship is crucial for achieving the maximum

  5. Sylgard® Mixing Study

    Energy Technology Data Exchange (ETDEWEB)

    Bello, Mollie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Welch, Cynthia F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Goodwin, Lynne Alese [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Keller, Jennie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-08-22

    Sylgard® 184 and Sylgard® 186 silicone elastomers form Dow Corning® are used as potting agents across the Nuclear Weapons Complex. A standardized mixing procedure is required for filled versions of these products. The present study is a follow-up to a mixing study performed by MST-7 which established the best mixing procedure to use when adding filler to either 184 or 186 base resins. The most effective and consistent method of mixing resin and curing agent for three modified silicone elastomer recipes is outlined in this report. For each recipe, sample size, mixing type, and mixing time was varied over 10 separate runs. The results show that the THINKY™ Mixer gives reliable mixing over varying batch sizes and mixing times. Hand Mixing can give improved mixing, as indicated by reduced initial viscosity; however, this method is not consistent.

  6. Glueball-meson mixing

    Energy Technology Data Exchange (ETDEWEB)

    Vento, Vicente [Consejo Superior de Investigaciones Cientificas, Departamento de Fisica Teorica y Instituto de Fisica Corpuscular, Universidad de Valencia, Burjassot (Spain)

    2016-01-15

    Calculations in unquenched QCD for the scalar glueball spectrum have confirmed previous results of Gluodynamics finding a glueball at ∝1750 MeV. I analyze the implications of this discovery from the point of view of glueball-meson mixing in light of the experimental scalar spectrum. (orig.)

  7. Mixed-Initiative Clustering

    Science.gov (United States)

    Huang, Yifen

    2010-01-01

    Mixed-initiative clustering is a task where a user and a machine work collaboratively to analyze a large set of documents. We hypothesize that a user and a machine can both learn better clustering models through enriched communication and interactive learning from each other. The first contribution or this thesis is providing a framework of…

  8. Mixing Over Rough Topography

    Science.gov (United States)

    2017-10-25

    www.apl.washington.edu/ people /profile.php?last_name=Gregg&first_name=Mike LONG-TERM GOALS To understand quantify diapycnal mixing in the ocean...ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) Office of Naval Research ONR 875 North Randolph Street Arlington, VA 22203-1995 11

  9. Mixed Lubricated Line Contacts

    NARCIS (Netherlands)

    Faraon, I.C.

    2005-01-01

    The present work deals with friction in mixed lubricated line contacts. Components in systems are becoming smaller and due to, for instance power transmitted, partial contact may occur. In industrial applications, friction between the moving contacting surfaces cannot be avoided, therefore it is

  10. Against Mixed Epistemology

    Directory of Open Access Journals (Sweden)

    Joe Milburn

    2015-05-01

    Full Text Available http://dx.doi.org/10.5007/1808-1711.2015v19n2p183 We can call any reductive account of knowledge that appeals to both safety and ability conditions a mixed account of knowledge. Examples of mixed accounts of knowledge include Pritchard’s (2012 Anti-Luck Virtue Epistemology, Kelp’s (2013 Safe-Apt account of knowledge, and Turri’s (2011 Ample belief account of knowledge. Mixed accounts of knowledge are motivated by well-known counterexamples to pure safety and pure ability accounts of knowledge. It is thought that by combining both safety and ability conditions we can give an extensionally adequate reductive account of knowledge. In this paper I argue that the putative counterexamples to pure safety and pure ability accounts of knowledge fail to motivate mixed accounts of knowledge. In particular, I argue that if the putative counterexamples are problematic for safety accounts they are problematic for ability accounts and vice-versa. The reason for this, I argue, is that the safety condition and ability condition should be understood as alternative expressions of the same intuition — that knowledge must come from a reliable source.

  11. Efficacité comparée de divers procédés physiques de séparation des argiles d'un sable de gisement A Comparison of Different Physical Processes for the Recovery of Clays from an Unconsolidated Sandstone

    Directory of Open Access Journals (Sweden)

    Yvon J.

    2006-11-01

    Full Text Available Divers procédés physiques (mixage, attrition, vibration ultra-sonique ont été utilisés pour désagréger et disperser les argiles d'un sable de gisement. Le traitement aux ultra-sons s'est avéré le plus efficace : après 10 min de vibration on récupère environ 1,5 fois plus de particules fines ( The characterizing of clays is an essential operation for understanding many problems encountered in production. It goes via a preliminary phase in which species are separated quickly and effectively without altering their nature. Chemical processes disperse clays by solubilizing their cements, amorphous compounds and poorly crystallized oxyhydroxides. But they attack fragile species and lead to mistaken results. Therefore, we have chosen various physical processes (mixing, attrition, ultrasonic vibration and compared their efficacy with a reservoir sand. This sand was a quartzose arenite in which 96. 6 % of the grains were between 63 µm and 2 mm. The < 40 µm fine fraction, obtained by wet sieving, represented 2. 44 % of the unprocessed sand, and the clayey fraction (kaolinite, illite, montmorillonite, interstratified illite-montmorillonite was 1. 20%. Mixing was done with a bladed stirer. 40 g of sand and 100 cm³ of demineralized water were stirred for 3 min at a speed of 3000 rpm. Attrition was done by two devices :(1 For attrition by rotation, 400 g of sand and 0. 5 liter of demineralized water were placed in a porcelain jar rotating at a speed of 37 rpm. Tests were performed with water alone and with the adding of a dispersant (0. 3 % sodium hexametaphosphate and a surfactant (0. 6 mole/liter of sodium sulfonate paraoctylphenyl. (2 Attrition by a Turbula TC2 mixer, which gave the jar a complex rotation movement including shaking and rhythmic rocking. 500 g of sand were thus processed in 1 literof 3 % sodium hexametaphosphate solution for varying times. Ultrasonic processing was done with a Sonifer 830 device. The probe was plunged into a

  12. [Mixed depression and DSM-5: A critical review].

    Science.gov (United States)

    Weibel, S; Bertschy, G

    2016-02-01

    euphoria with depression) or improbable (as increased or excessive involvement in activities that have a high potential for painful consequences). Also, some more specific symptoms that can be observed in mixed depression are not mentioned (such as hypersensitivity to light or noise, absence of motor retardation, dramatic expressivity of suffering). The DSM-5, as did DSM-IV, refers to an understanding of mixed depression as a simple addition of depressive and manic symptoms. The classification does not take into account that the symptoms could be rather different from hypomania, as the expression of an overactive thought in a depressed mind. Secondly, we reviewed cohort studies using the DSM-5 criteria (or similar criteria with the exclusion of overlapping symptoms), and as a consequence of the poorly defined symptoms, we found that the diagnosis of mixed depression according to DSM-5 is almost impossible, either in unipolar or in bipolar depression. We think, with others, that the definition of the mixed depression by the DSM-5 is not clinically relevant and misses important information about the concept. Clinicians can be attentive to the identification of mixed character in depression, even if DSM-5 criteria are not fully met. Unfortunately, the DSM-5 definition could undermine research efforts for a better understanding of epidemiology, phenomenology and therapeutics of mixed depression. We propose and discuss alternative solutions for defining mixed depression, such as the absence of exclusion of "overlapping" symptoms, a more insighted phenomenology, or a dimensional approach. Copyright © 2015 L’Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

  13. Catalyseurs et procédés catalytiques utilisés dans la production des grands intermédiaires pétrochimiques. Situation actuelle et futur Catalysts and Catalytic Processes Used for the Production of the Major Petrochemical Building Blocks. Present Situation and the Future

    Directory of Open Access Journals (Sweden)

    Boitiaux J. P.

    2006-11-01

    Full Text Available La pétrochimie représente une part modeste du marché des catalyseurs, mais les dix dernières années ont vu des améliorations substantielles des catalyseurs et des procédés utilisés. Ces améliorations ont permis de mieux répondre à la demande en grands intermédiaires pétrochimiques. Cette évolution est bien illustrée par les hydrogénations, autour du vapocraquage destiné à produire des oléfines, par le reformage catalytique et les procédés satellites destinés à produire des aromatiques et par les nouveaux procédés de déshydrogénation, métathèse, oligomérisation. . . qui permettent de mieux équilibrer le marché des oléfines. Petrochemicals account for a modest share of the market for catalysts, but there have been substantial improvements in the catalysts and processes used in the last ten years. These improvements have brought about a better response to the demand for major petrochemical building blocks. This trend is clearly illustrated by hydrogenations in the field of steam cracking to produce olefins, by catalytic reforming and satellite processes to produce aromatics, and by new processes such as dehydrogenation, metathesis and oligomerization which provide better balance to the market for olefins.

  14. Contribution au développement d'un procédé de stabilisation d'une boisson à base d'eau et de sirop d'érable par la technologie d'électro-activation en solution

    OpenAIRE

    Koffi, Kouassi

    2013-01-01

    Le développement de nouveaux moyens pour traiter les denrées et produits agroalimentaires par l'utilisation des techniques électrochimiques a déjà joué un rôle important dans nombres de procédés. Parmi ces techniques électrochimiques, l’électro-activation, constitue à ce jour une voie nouvelle pour le traitement et l’amélioration de la qualité de produits et de solutions aqueuses en industrie agroalimentaire. L’électro-activation est dite «reagentless technology», c’est-à-dire une technologie...

  15. Unitarity constraints on trimaximal mixing

    International Nuclear Information System (INIS)

    Kumar, Sanjeev

    2010-01-01

    When the neutrino mass eigenstate ν 2 is trimaximally mixed, the mixing matrix is called trimaximal. The middle column of the trimaximal mixing matrix is identical to tribimaximal mixing and the other two columns are subject to unitarity constraints. This corresponds to a mixing matrix with four independent parameters in the most general case. Apart from the two Majorana phases, the mixing matrix has only one free parameter in the CP conserving limit. Trimaximality results in interesting interplay between mixing angles and CP violation. A notion of maximal CP violation naturally emerges here: CP violation is maximal for maximal 2-3 mixing. Similarly, there is a natural constraint on the deviation from maximal 2-3 mixing which takes its maximal value in the CP conserving limit.

  16. Renormalization of fermion mixing

    International Nuclear Information System (INIS)

    Schiopu, R.

    2007-01-01

    Precision measurements of phenomena related to fermion mixing require the inclusion of higher order corrections in the calculation of corresponding theoretical predictions. For this, a complete renormalization scheme for models that allow for fermion mixing is highly required. The correct treatment of unstable particles makes this task difficult and yet, no satisfactory and general solution can be found in the literature. In the present work, we study the renormalization of the fermion Lagrange density with Dirac and Majorana particles in models that involve mixing. The first part of the thesis provides a general renormalization prescription for the Lagrangian, while the second one is an application to specific models. In a general framework, using the on-shell renormalization scheme, we identify the physical mass and the decay width of a fermion from its full propagator. The so-called wave function renormalization constants are determined such that the subtracted propagator is diagonal on-shell. As a consequence of absorptive parts in the self-energy, the constants that are supposed to renormalize the incoming fermion and the outgoing antifermion are different from the ones that should renormalize the outgoing fermion and the incoming antifermion and not related by hermiticity, as desired. Instead of defining field renormalization constants identical to the wave function renormalization ones, we differentiate the two by a set of finite constants. Using the additional freedom offered by this finite difference, we investigate the possibility of defining field renormalization constants related by hermiticity. We show that for Dirac fermions, unless the model has very special features, the hermiticity condition leads to ill-defined matrix elements due to self-energy corrections of external legs. In the case of Majorana fermions, the constraints for the model are less restrictive. Here one might have a better chance to define field renormalization constants related by

  17. Renormalization of fermion mixing

    Energy Technology Data Exchange (ETDEWEB)

    Schiopu, R.

    2007-05-11

    Precision measurements of phenomena related to fermion mixing require the inclusion of higher order corrections in the calculation of corresponding theoretical predictions. For this, a complete renormalization scheme for models that allow for fermion mixing is highly required. The correct treatment of unstable particles makes this task difficult and yet, no satisfactory and general solution can be found in the literature. In the present work, we study the renormalization of the fermion Lagrange density with Dirac and Majorana particles in models that involve mixing. The first part of the thesis provides a general renormalization prescription for the Lagrangian, while the second one is an application to specific models. In a general framework, using the on-shell renormalization scheme, we identify the physical mass and the decay width of a fermion from its full propagator. The so-called wave function renormalization constants are determined such that the subtracted propagator is diagonal on-shell. As a consequence of absorptive parts in the self-energy, the constants that are supposed to renormalize the incoming fermion and the outgoing antifermion are different from the ones that should renormalize the outgoing fermion and the incoming antifermion and not related by hermiticity, as desired. Instead of defining field renormalization constants identical to the wave function renormalization ones, we differentiate the two by a set of finite constants. Using the additional freedom offered by this finite difference, we investigate the possibility of defining field renormalization constants related by hermiticity. We show that for Dirac fermions, unless the model has very special features, the hermiticity condition leads to ill-defined matrix elements due to self-energy corrections of external legs. In the case of Majorana fermions, the constraints for the model are less restrictive. Here one might have a better chance to define field renormalization constants related by

  18. Experiments in mixed reality

    Science.gov (United States)

    Krum, David M.; Sadek, Ramy; Kohli, Luv; Olson, Logan; Bolas, Mark

    2010-01-01

    As part of the Institute for Creative Technologies and the School of Cinematic Arts at the University of Southern California, the Mixed Reality lab develops technologies and techniques for presenting realistic immersive training experiences. Such experiences typically place users within a complex ecology of social actors, physical objects, and collections of intents, motivations, relationships, and other psychological constructs. Currently, it remains infeasible to completely synthesize the interactivity and sensory signatures of such ecologies. For this reason, the lab advocates mixed reality methods for training and conducts experiments exploring such methods. Currently, the lab focuses on understanding and exploiting the elasticity of human perception with respect to representational differences between real and virtual environments. This paper presents an overview of three projects: techniques for redirected walking, displays for the representation of virtual humans, and audio processing to increase stress.

  19. Ruminal degradation of aerial biomass and seeds of wild species of Lupinus

    OpenAIRE

    Pablo-Pérez, Maricela; Lagunes-Espinoza, Luz del C; Ramos-Juárez, Jesús; López-Upton, Javier; Aranda-Ibáñez, Emilio M; Vargas-Villamil, Luis

    2014-01-01

    Ruminal degradation of dry matter (DMD) and crude protein (CPD) for aerial biomass at the flowering stage and for the seeds of L. campestris, L. exaltatus, L. hintonii and L. montanus was determined using the nylon bag technique with two fistulated steers in five incubation times (3, 9, 12, 24 and 48 h), including a sample of soybean paste (SP). The data obtained were analyzed using PROC MIXED of SAS for repeated measures. The results showed interactions between species and incubation time fo...

  20. Marketing-Mix

    OpenAIRE

    Huppertz, Matthias; Schneider, Andreas Dirk

    2006-01-01

    Der Marketing-Mix mit seinen 4Ps zur operativen Marketingplanung ist innerhalb des Marketing-Managements die nächste Stufe nach der Marktanalyse in dem die strategische Marketingplanung erarbeitet wurde. Die strategische Marketingplanung befasst sich mit der Analyse des Zielmarktes und der grundsätzlichen Zielrichtung des Unternehmens. Auf Basis der gewonnenen Erkenntnisse wird in der Phase der operativen Marketingplanung versucht, die Unternehmensaktivitäten am Zielmarkt des Unternehmens aus...

  1. New flash mixing

    International Nuclear Information System (INIS)

    Sackmann, I.

    1980-01-01

    It was found that even for stars evolved away from the red giant branch, a new mixing of nucleo-synthesis products from the hydrogen-burning shells into surface layers was possible, from the penetration of the contaminated intershell region with the H- and He-ionization convection zones. This is due to the helium shell flash driving an immense expansion of an inner carbon pocket, namely, by a factor of 12,000 in radius, a drop in density of about 10 12 , and a cooling of inner pockets normally near 10 8 K to 23,000 K. The surface would be enriched in carbon ( 12 C), helium ( 4 He), and s-process elements, but not significantly in nitrogen ( 14 N), oxygen ( 16 O), or the isotope 13 C. This new type of mixing might provide the missing clue for FG Sagittae. Such a mixing had been suggested by the observations of FG Sagittae, but had been unexplainable by theory up to now

  2. Stability of mixing layers

    Science.gov (United States)

    Tam, Christopher; Krothapalli, A

    1993-01-01

    The research program for the first year of this project (see the original research proposal) consists of developing an explicit marching scheme for solving the parabolized stability equations (PSE). Performing mathematical analysis of the computational algorithm including numerical stability analysis and the determination of the proper boundary conditions needed at the boundary of the computation domain are implicit in the task. Before one can solve the parabolized stability equations for high-speed mixing layers, the mean flow must first be found. In the past, instability analysis of high-speed mixing layer has mostly been performed on mean flow profiles calculated by the boundary layer equations. In carrying out this project, it is believed that the boundary layer equations might not give an accurate enough nonparallel, nonlinear mean flow needed for parabolized stability analysis. A more accurate mean flow can, however, be found by solving the parabolized Navier-Stokes equations. The advantage of the parabolized Navier-Stokes equations is that its accuracy is consistent with the PSE method. Furthermore, the method of solution is similar. Hence, the major part of the effort of the work of this year has been devoted to the development of an explicit numerical marching scheme for the solution of the Parabolized Navier-Stokes equation as applied to the high-seed mixing layer problem.

  3. MARKETING MIX IN SPORT

    Directory of Open Access Journals (Sweden)

    Srećko Novaković

    2011-03-01

    Full Text Available Marketing mix'' along the term of life cycle has robbed the trademark for the conception of marketing and the market direction of company, corporations and institutions. Essence marketing-mixa is in the simultaneous determining of the target market group of consumer (the buyer or stays the public and specially prepared and the coordinated impact of elements mixa, and this is the product, price, distributions and graduation ceremonies. Given that is mix combinations of verified variables, companies he use in order to would achieve are wished the scope sales on the target market. In the wider context significant influence of environment on the chosen structure marketing-mixa have not only technological, economic and competitive services already and socially-owned, legislative, legal and political services. From those reasons chant the marketing -mixa occasionally replaces expression are coordinated term acts on the market. Elements marketing-mix-and at sport marketings same are as well as at marketings every other activity. They contain the sportively product and the service, appreciate the sport product and services, distribution of sport product and services and the promotion of sport product and services.

  4. Mixing of solids

    CERN Document Server

    Weinekötter, Ralf

    2000-01-01

    This book is a welcome edition to the Particle Technology Series, formerly Powder Technology Series. It is the second book in the series which describes powder mixing and we make no excuses for that. The topic of powder mixing is fundamental to powder technology and is one which always aroses interest. That will not change. As powder products become more complex they will pose new mixing problems. The solutions lie in the intelligent use of equipment, an understanding of powder properties and a good knowledge of basic statistics. The authors of this book have presented those three ingredients with great clarity. The book is based on long experience and deep thought, I have enjoyed reading it and am pleased to recommend it. Delft University of Technology, NL-Delft, July 1999 Brian Scarlett, Series Editor IX VII Foreword to the English Edition In response to many enquiries from industrial organisations and institutes involved with the technology of processing bulk materials, we are pleased to present the Englis...

  5. Mixing, entropy and competition

    International Nuclear Information System (INIS)

    Klimenko, A Y

    2012-01-01

    Non-traditional thermodynamics, applied to random behaviour associated with turbulence, mixing and competition, is reviewed and analysed. Competitive mixing represents a general framework for the study of generic properties of competitive systems and can be used to model a wide class of non-equilibrium phenomena ranging from turbulent premixed flames and invasion waves to complex competitive systems. We demonstrate consistency of the general principles of competition with thermodynamic description, review and analyse the related entropy concepts and introduce the corresponding competitive H-theorem. A competitive system can be characterized by a thermodynamic quantity—competitive potential—which determines the likely direction of evolution of the system. Contested resources tend to move between systems from lower to higher values of the competitive potential. There is, however, an important difference between conventional thermodynamics and competitive thermodynamics. While conventional thermodynamics is constrained by its zeroth law and is fundamentally transitive, the transitivity of competitive thermodynamics depends on the transitivity of the competition rules. Intransitivities are common in the real world and are responsible for complex behaviour in competitive systems. This work follows ideas and methods that have originated from the analysis of turbulent combustion, but reviews a much broader scope of issues linked to mixing and competition, including thermodynamic characterization of complex competitive systems with self-organization. The approach presented here is interdisciplinary and is addressed to the general educated readers, whereas the mathematical details can be found in the appendices. (comment)

  6. Company Marketing Mix

    OpenAIRE

    Vyroubalová, Klára

    2015-01-01

    Tématem této bakalářské práce je ,,Marketingový mix společnosti SKITECH, s. r. o.“ Práce se zabývá vypracováním marketingového mixu a navrţením lyţařských produktů skiareálu. Předpokladem pro vytvoření marketingového mixu je provedení SWOT analýzy a analýzy konkurence. Na základě těchto výsledků budou stanoveny vize a cíle skiareálu a návrhy jednotlivých produktů. V závěrečné části je aplikován marketingový mix na konkrétní produkt. This thesis deals with the marketing mix of the SKITECH c...

  7. Linear mixed models a practical guide using statistical software

    CERN Document Server

    West, Brady T; Galecki, Andrzej T

    2014-01-01

    Highly recommended by JASA, Technometrics, and other journals, the first edition of this bestseller showed how to easily perform complex linear mixed model (LMM) analyses via a variety of software programs. Linear Mixed Models: A Practical Guide Using Statistical Software, Second Edition continues to lead readers step by step through the process of fitting LMMs. This second edition covers additional topics on the application of LMMs that are valuable for data analysts in all fields. It also updates the case studies using the latest versions of the software procedures and provides up-to-date information on the options and features of the software procedures available for fitting LMMs in SAS, SPSS, Stata, R/S-plus, and HLM.New to the Second Edition A new chapter on models with crossed random effects that uses a case study to illustrate software procedures capable of fitting these models Power analysis methods for longitudinal and clustered study designs, including software options for power analyses and suggest...

  8. Comment on Hoffman and Rovine (2007): SPSS MIXED can estimate models with heterogeneous variances.

    Science.gov (United States)

    Weaver, Bruce; Black, Ryan A

    2015-06-01

    Hoffman and Rovine (Behavior Research Methods, 39:101-117, 2007) have provided a very nice overview of how multilevel models can be useful to experimental psychologists. They included two illustrative examples and provided both SAS and SPSS commands for estimating the models they reported. However, upon examining the SPSS syntax for the models reported in their Table 3, we found no syntax for models 2B and 3B, both of which have heterogeneous error variances. Instead, there is syntax that estimates similar models with homogeneous error variances and a comment stating that SPSS does not allow heterogeneous errors. But that is not correct. We provide SPSS MIXED commands to estimate models 2B and 3B with heterogeneous error variances and obtain results nearly identical to those reported by Hoffman and Rovine in their Table 3. Therefore, contrary to the comment in Hoffman and Rovine's syntax file, SPSS MIXED can estimate models with heterogeneous error variances.

  9. The Value of Mixed Methods Research: A Mixed Methods Study

    Science.gov (United States)

    McKim, Courtney A.

    2017-01-01

    The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

  10. Cornell Mixing Zone Expert System

    Science.gov (United States)

    This page provides an overview Cornell Mixing Zone Expert System water quality modeling and decision support system designed for environmental impact assessment of mixing zones resulting from wastewater discharge from point sources

  11. Warm mix asphalt : final report.

    Science.gov (United States)

    2014-11-01

    The performance of pavements constructed using warm mix asphalt (WMA) technology were : compared to the performance of conventional hot mix asphalt (HMA) pavements placed on the : same project. Measurements of friction resistance, rutting/wear, ride ...

  12. Lagrangian Studies of Lateral Mixing

    Science.gov (United States)

    2017-09-19

    Final Technical 3. DATES COVERED (From - To) 01/01/2009 – 12/31/2015 4. TITLE AND SUBTITLE Lagrangian Studies of Lateral Mixing 5a. CONTRACT NUMBER...public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The Lateral Mixing Experiment (LATMIX) focused on mixing and...anomalies. LATMIX2 targeted the wintertime Gulf Stream, where deep mixed layers, strong lateral density gradients (Gulf Stream north wall) and the

  13. The resilience of paradigm mixes

    DEFF Research Database (Denmark)

    Daugbjerg, Carsten; Farsund, Arild Aurvåg; Langhelle, Oluf

    2017-01-01

    This paper argues that a policy regime based on a paradigm mix may be resilient when challenged by changing power balances and new agendas. Controversies between the actors can be contained within the paradigm mix as it enables them to legitimize different ideational positions. Rather than engaging...... context changed. The paradigm mix proved sufficiently flexible to accommodate food security concerns and at the same time continue to take steps toward further liberalization. Indeed, the main players have not challenged the paradigm mix....

  14. Mixing properties of quantum systems

    International Nuclear Information System (INIS)

    Narnhofer, H.; Thirring, W.

    1988-01-01

    We generalize the classical notion of topological mixing for automorphisms of C * -algebras in two ways. We show that for Galilean invariant Fermi systems the weaker form of mixing is satisfied. With some additional requirement on the range of the interaction we can also demonstrate the stronger mixing property. (Author)

  15. B Lifetimes and Mixing

    International Nuclear Information System (INIS)

    Evans, Harold G.

    2009-01-01

    The Tevatron experiments, CDF and D0, have produced a wealth of new B-physics results since the start of Run II in 2001. We've observed new B-hadrons, seen new effects, and increased many-fold the precision with which we know the properties of b-quark systems. In these proceedings, we will discuss two of the most fruitful areas in the Tevatron B-physics program: lifetimes and mixing. We'll examine the experimental issues driving these analyses, present a summary of the latest results, and discuss prospects for the future.

  16. Transition mixing among baryons

    International Nuclear Information System (INIS)

    Faiman, D.

    1976-01-01

    A degenerate perturbation theory model for mass splitting within the 70,1 - baryon multiplet is proposed. It is found that dominance of the lowest-lying two-body 56x35 intermediate states produces mixing angles in fair approximation to those previously deduced from SU(6)sub(W) analysis of decay data. The prediction of the couplings of all hitherto undetected members of the multiplet and of mass were made. The results call into question the nature of Λ (1405). (author)

  17. Mixed dimers, ch. 7

    International Nuclear Information System (INIS)

    Deursen, A.P.J. van; Reuss, J.

    1976-01-01

    An attempt has been made to detect mixed dimers in nozzle beams of mixtures; NeAr and HeNe dimers were observed with sufficient intensity to determine the total collision cross section. A similar attempt for H 2 Ar was partially hampered by the circumstance that the corresponding HAr + ion must be detected on the wing of the thousand times larger Ar + peak. The search for H 2 He, H 2 Ne and HeAr dimers was not successful, due to masking ion peaks, H 5 + for HHe + , 21 Ne + for H 20 Ne + , and CO 2 + for HeAr + . (Auth.)

  18. Mixed Interaction Spaces

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas; Eriksson, E.; Hansen, T.R.

    In this paper, we describe a new interaction technique for mobile devices named Mixed Interaction Space that uses the camera of the mobile device to track the position, size and rotation of a fixed-point. In this demonstration we will present a system that uses a hand-drawn circle, colored object...... or a person’s face as a fixed-point to determine the location of the device. We use these features as a 4 dimensional input vector to a set of different applications....

  19. MixedNotes

    DEFF Research Database (Denmark)

    Jokela, Tero; Lucero, Andrés

    2014-01-01

    Affinity Diagramming is a technique to organize and make sense of qualitative data. It is commonly used in Contextual Design and HCI research. However, preparing notes for and building an Affinity Diagram remains a laborious process, with a wide variety of different approaches and practices....... In this paper, we present MixedNotes, a novel technique to prepare physical paper notes for Affinity Diagramming, and a software tool to support this technique. The technique has been tested with large real-life Affinity Diagrams with overall positive results....

  20. Coloring mixed hypergraphs

    CERN Document Server

    Voloshin, Vitaly I

    2002-01-01

    The theory of graph coloring has existed for more than 150 years. Historically, graph coloring involved finding the minimum number of colors to be assigned to the vertices so that adjacent vertices would have different colors. From this modest beginning, the theory has become central in discrete mathematics with many contemporary generalizations and applications. Generalization of graph coloring-type problems to mixed hypergraphs brings many new dimensions to the theory of colorings. A main feature of this book is that in the case of hypergraphs, there exist problems on both the minimum and th

  1. System equivalent model mixing

    Science.gov (United States)

    Klaassen, Steven W. B.; van der Seijs, Maarten V.; de Klerk, Dennis

    2018-05-01

    This paper introduces SEMM: a method based on Frequency Based Substructuring (FBS) techniques that enables the construction of hybrid dynamic models. With System Equivalent Model Mixing (SEMM) frequency based models, either of numerical or experimental nature, can be mixed to form a hybrid model. This model follows the dynamic behaviour of a predefined weighted master model. A large variety of applications can be thought of, such as the DoF-space expansion of relatively small experimental models using numerical models, or the blending of different models in the frequency spectrum. SEMM is outlined, both mathematically and conceptually, based on a notation commonly used in FBS. A critical physical interpretation of the theory is provided next, along with a comparison to similar techniques; namely DoF expansion techniques. SEMM's concept is further illustrated by means of a numerical example. It will become apparent that the basic method of SEMM has some shortcomings which warrant a few extensions to the method. One of the main applications is tested in a practical case, performed on a validated benchmark structure; it will emphasize the practicality of the method.

  2. Wave mixing spectroscopy

    International Nuclear Information System (INIS)

    Smith, R.W.

    1980-08-01

    Several new aspects of nonlinear or wave mixing spectroscopy were investigated utilizing the polarization properties of the nonlinear output field and the dependence of this field upon the occurrence of multiple resonances in the nonlinear susceptibility. First, it is shown theoretically that polarization-sensitive detection may be used to either eliminate or controllably reduce the nonresonant background in coherent anti-Stokes Raman spectroscopy, allowing weaker Raman resonances to be studied. The features of multi-resonant four-wave mixing are examined in the case of an inhomogeneously broadened medium. It is found that the linewidth of the nonlinear output narrows considerably (approaching the homogeneous width) when the quantum mechanical expressions for the doubly- and triply-resonant susceptibilities are averaged over a Doppler or strain broadened profile. Experimental studies of nonlinear processes in Pr +3 :LaF 3 verify this linewidth narrowing, but indicate that this strain broadened system cannot be treated with a single broadening parameter as in the case of Doppler broadening in a gas. Several susceptibilities are measured from which are deduced dipole matrix elements and Raman polarizabilities related to the 3 H 4 , 3 H 6 , and 3 P 0 levels of the praseodymium ions

  3. Mixed RIA standard

    International Nuclear Information System (INIS)

    Talan, P.; Mucha, J.; Krizan, J.

    1986-01-01

    For the radioimmunoassay of digoxin, 3,5,3'-triiodothyronine, 17β-estradiol, progesterone, testosterone and α 1 -fetoprotein a mixed standard was prepared of these substances in a gamma globulin solution at a concentration of 0.8 to 1.4 wt.% in an aqueous buffer at pH within the range of 6 - 9. The standard contains digoxin at a concentration of 10 -4 to 10 nmol/l, 17β-estradiol at 10 -4 to 2 nmol/l, progesteron at 10 -4 to 100 nmol/l, testosterone at 1o -4 to 21 nmol/l, and α 1 -fetoprotein at 10 -4 to 10 nmol/l with at least two of these substances having concentrations higher than 10 -3 nmol/l. Examples are given of the preparation of the mixed standard with different concentrations of the components. The use of the standard has the following advantages: it is labor saving, reduces the risk of failure in the manufacture of RIA kits, eliminates mistakes in the selection of kits for the determination of different substances and allows a more economical use of material. (E.S.)

  4. Isospin mixing in light nuclei

    International Nuclear Information System (INIS)

    Ludwig, E.J.; Clegg, T.B.; Fauber, R.E.; Karwowski, H.J.; Mooney, T.M.; Thompson, W.J.

    1985-01-01

    This program has provided accurate measurements of isospin mixing (ΔT = 1,2) in proton elastic scattering on even-even target nuclei up to A = 40. In order to improve experimental results and to test the hypothesis that isospin mixing is dominated by mixing in the target ground state (as opposed to mixing in the compound system) the authors have undertaken to (1) extend the proton scattering results to additional T = 3/2 states in certain compound systems and (2) examine processes which can proceed by only isotensor mixing (ΔT = 2) in order to isolate the effects of that contribution

  5. Frontogenesis and turbulent mixing

    Science.gov (United States)

    Zhang, S.; Chen, F.; Shang, Q.

    2017-12-01

    A hydrological investigation was conducted in the shelf of eastern Hainan island during July 2012. With the in-situ measurements from four cross-shelf sections and satellite data, the submesoscale process of the fronts are discussed in this paper, the seasonal variation characteristics of thermal front, the three-dimensional structure, dynamic characteristics of frontal and mixed characteristics in the shelf sea of eastern Hainan island. It's obviously that the thermal front has a seasonal variation: the front is strongest in winter, and decreased gradually in spring and summer. However, it fade and disappear in fall. The core region of the front also changes with the seasons, it moved southward gradually from mainly distributed in the upwelling zone and the front center is not obvious in summer. it is a typical upwelling front in summer, the near shore is compensated with the underlying low-temperature and high-sale water , while the offshore is the high-temperature and low-salinity shelf water. The thermal front distribution is located in the 100m isobaths. The frontal intensity is reduced with increasing depth, and position goes to offshore. Subsurface temperature front is significantly higher in the surface of the sea, which may cause by the heating of nearshore sea surface water and lead to the weakening horizontal temperature gradient. Dynamic characteristics of the front has a great difference in both sides. The O(1) Rossby number is positive on the dense side and negative on the light side. The maximum of along-frontal velocity is 0.45m/s and the stretching is strengthened by strong horizontal shear, also is the potential vorticity, which can trace the cross front Ekman transport. We obtained the vertical velocity with by quasi-geostrophic omega equation and grasped the ageostrophic secondary circulation. The magnitude of frontal vertical velocity is O(10-5) and causes downwelling on the dense side and upwelling on the light side, which constitute the

  6. Mixed Partnering and Parenting

    DEFF Research Database (Denmark)

    Singla, Rashmi

    relationship is formed across two socially significant groups: ethnic, religious, region/caste, thus the present study has broad relevance. This proposal delineates the demographic details, intervention process of two ethnically mixed- marriage cases. Cases’ analyses are combined with relevant results from...... an empirical study (Singla, 2015) about intermarried couples to present lessons for counselling and psychotherapy good practices. The couples in the two cases and ten in-depth interviews based empirical study are formed across ethnic/religious borders - one partner is native Danish and the other originates...... from South Asia (India, Pakistan). Cultural historical psychology forms the background of the theoretical framework of the study, while a combination of intersectionality (Moodley, 2011), everyday life perspective and transnationalism forms the foreground. The lessons learnt for counselling...

  7. Radioactive mixed waste disposal

    International Nuclear Information System (INIS)

    Jasen, W.G.; Erpenbeck, E.G.

    1993-02-01

    Various types of waste have been generated during the 50-year history of the Hanford Site. Regulatory changes in the last 20 years have provided the emphasis for better management of these wastes. Interpretations of the Atomic Energy Act of 1954 (AEA), the Resource Conservation and Recovery Act of 1976 (RCRA), and the Hazardous and Solid Waste Amendments (HSWA) have led to the definition of radioactive mixed wastes (RMW). The radioactive and hazardous properties of these wastes have resulted in the initiation of special projects for the management of these wastes. Other solid wastes at the Hanford Site include low-level wastes, transuranic (TRU), and nonradioactive hazardous wastes. This paper describes a system for the treatment, storage, and disposal (TSD) of solid radioactive waste

  8. Marketing mix and competitiveness

    Directory of Open Access Journals (Sweden)

    Anđelković Slobodan

    2007-01-01

    Full Text Available Competitiveness cannot simply be viewed as a country's ability to export or generate trade surpluses, since these can be brought about at least temporarily by means of artificially lowering the exchange rate and/or compressing domestic expenditures, as has been done in recent years by many DC that have tried to adjust to diminished resource availability. Authors standpoint is that international competitiveness requires creating comparative advantage where it does not exist, and requires action on several levels including an emerging consensus on the importance of macroeconomic policy, role and accountability of the government as well as the imperative of developing and internalizing technology body of knowledge for achieving competitiveness. Particular attention is given to the role and impact of marketing instruments marketing mix.

  9. Neutrino masses and mixing

    International Nuclear Information System (INIS)

    Fogli, G.

    1998-01-01

    The paper presents an analysis of the solar neutrino problem in terms of both Mikheyev-Smirnov-Wolfenstein (MSW) and vacuum neutrino oscillations, with the inclusion of the data collected by the SuperKamiokande experiment during 306.3 days of operation. In particular, the observed energy spectrum of the recoil electrons from 8 B neutrino scattering is discussed in detail and used to constrain the mass-mixing parameter space. Going to the atmospheric neutrino anomaly, the paper performs both a two- and three-flavor analysis of the most recent SuperKamiokande atmospheric neutrino data. The variations of the zenith distributions of ν events in the presence of flavor oscillations are investigated. It is seen that fits to the SK data, with and without the addition of the CHOOZ constrains, strongly limit the parameter space. Detailed bounds in triangle graphs are reported

  10. Mixed Map Labeling

    Directory of Open Access Journals (Sweden)

    Maarten Löffler

    2016-12-01

    Full Text Available Point feature map labeling is a geometric visualization problem, in which a set of input points must be labeled with a set of disjoint rectangles (the bounding boxes of the label texts. It is predominantly motivated by label placement in maps but it also has other visualization applications. Typically, labeling models either use internal labels, which must touch their feature point, or external (boundary labels, which are placed outside the input image and which are connected to their feature points by crossing-free leader lines. In this paper we study polynomial-time algorithms for maximizing the number of internal labels in a mixed labeling model that combines internal and external labels. The model requires that all leaders are parallel to a given orientation θ ∈ [0, 2π, the value of which influences the geometric properties and hence the running times of our algorithms.

  11. MixFit

    DEFF Research Database (Denmark)

    Haller, Toomas; Leitsalu, Liis; Fischer, Krista

    2017-01-01

    Ancestry information at the individual level can be a valuable resource for personalized medicine, medical, demographical and history research, as well as for tracing back personal history. We report a new method for quantitatively determining personal genetic ancestry based on genome-wide data....... Numerical ancestry component scores are assigned to individuals based on comparisons with reference populations. These comparisons are conducted with an existing analytical pipeline making use of genotype phasing, similarity matrix computation and our addition-multidimensional best fitting by Mix......Fit. The method is demonstrated by studying Estonian and Finnish populations in geographical context. We show the main differences in the genetic composition of these otherwise close European populations and how they have influenced each other. The components of our analytical pipeline are freely available...

  12. Evaluación de la gestión de residuos derivados del proceso de impresión en Datapoint de Colombia S.A.S, y propuesta de mejora

    OpenAIRE

    Fino Gallego, Sandra Patricia; Gómez Gianine, Carol Ruchina; Ruano Reyes, Sandra Milena

    2015-01-01

    Este trabajo se centra en el análisis de las actividades desarrolladas en torno a los servicios de procesos de impresión que ofrece la organización DATAPOINT de Colombia SAS para identificar los puntos críticos en la gestión de los residuos de impresión y las decisiones tomadas por parte de los involucrados durante todo el proceso (proveedores, clientes y la empresa), con el fin de revisar medidas y estrategias que permitan fortalecer la gestión integral de residuos de impresión a partir d...

  13. Estudio de inteligencia de mercados para la importación de tubería de acero carbón para PSA Colombia S.A.S.

    OpenAIRE

    2012-01-01

    Estudio de inteligencia de mercados para la importación de tuberia de acero carbon para PSA Colombia S.A.S, SCH 40 de 2" revisar la viabilidad de la compra local versus la compra en el exterior analizando tres proveedores Estados Unidos, China y Brasil. En el presente trabajo se estudian los mercados para la importación de tubería de Acero Carbón SCH40, se realiza el análisis de cada área del proceso de comercialización y se establece en términos técnicos, comerciales, financieros, logísticos...

  14. Análisis financiero de la empresa Neoris Colombia S.A.S. y el sector de tecnologías de información en Colombia

    OpenAIRE

    Chaparro Rojas, Laura Cristina

    2016-01-01

    El siguiente trabajo de grado para la Facultad de Administración de la Universidad del Rosario, tiene como objetivo principal realizar un análisis financiero de la compañía NEORIS COLOMBIA S.A.S., empresa resultante de las soluciones innovadoras que creó CEMEX, uno de los productores de cemento más grandes y rentables del mundo, y que se dedica a brindar consultoría interna de tecnología. Asimismo, indagar las implicaciones que tienen los cambios y el avance en los sistemas de implementación ...

  15. Estudio logístico en la empresa COMERFRUTAS de Colombia S.A.S para la exportación de pulpa de limón al mercado holandés

    OpenAIRE

    Piedrahita Bravo, Carlos Hernán; Marín Ríos, Esteban

    2012-01-01

    El presente documento ofrece una guía logística y análisis financiero para las pequeñas y medianas empresas (PyMES) de Colombia que deseen exportar pulpa de limón al mercado Europeo. Para el desarrollo de este trabajo se ha tomado el caso de la micro empresa COMERFRUTAS de Colombia S.A.S. (productora de pulpa de limón) y se ha realizado un estudio de competitividad de puertos, agentes de carga tanto terrestre como marítimos para dar las bases necesarias de exportación a las PyMES colombianas ...

  16. Plan de mejoramiento para el área de logística a nivel local de la compañía RotamAgrochemical Colombia S.A.S.

    OpenAIRE

    Gómez Susa, Martha Jannett; Morales Valero, Nadine Stella; Mosquera López, Diana Milena

    2013-01-01

    El trabajo pretende diseñar un plan de mejoramiento en el área logística que agregue valor, aumente la eficiencia y mejore los procesos de almacenamiento y distribución, gestión de inventarios y control de los productos agroquímicos de la Compañía RotamAgrochemical Colombia S.A.S., se formulan algunas recomendaciones para el mejoramiento de los procesos en las Áreas de almacenamiento, inventarios y seguridad industrial

  17. Mixed twistor D-modules

    CERN Document Server

    Mochizuki, Takuro

    2015-01-01

    We introduce mixed twistor D-modules and establish their fundamental functorial properties. We also prove that they can be described as the gluing of admissible variations of mixed twistor structures. In a sense, mixed twistor D-modules can be regarded as a twistor version of M. Saito's mixed Hodge modules. Alternatively, they can be viewed as a mixed version of the pure twistor D-modules studied by C. Sabbah and the author. The theory of mixed twistor D-modules is one of the ultimate goals in the study suggested by Simpson's Meta Theorem, and it would form a foundation for the Hodge theory of holonomic D-modules which are not necessarily regular singular.  .

  18. Authoring Immersive Mixed Reality Experiences

    Science.gov (United States)

    Misker, Jan M. V.; van der Ster, Jelle

    Creating a mixed reality experience is a complicated endeavour. From our practice as a media lab in the artistic domain we found that engineering is “only” a first step in creating a mixed reality experience. Designing the appearance and directing the user experience are equally important for creating an engaging, immersive experience. We found that mixed reality artworks provide a very good test bed for studying these topics. This chapter details three steps required for authoring mixed reality experiences: engineering, designing and directing. We will describe a platform (VGE) for creating mixed reality environments that incorporates these steps. A case study (EI4) is presented in which this platform was used to not only engineer the system, but in which an artist was given the freedom to explore the artistic merits of mixed reality as an artistic medium, which involved areas such as the look and feel, multimodal experience and interaction, immersion as a subjective emotion and game play scenarios.

  19. Determining Σ-Λ mixing

    Energy Technology Data Exchange (ETDEWEB)

    Horsley, R. [Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Najjar, J. [Regensburg Univ. (Germany). Inst. fuer Theoretische Physik; Nakamura, Y. [RIKEN Advanced Institute for Computational Science, Kobe (Japan); Perlt, H.; Schiller, A. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Pleiter, D. [Forschungszentrum Juelich GmbH (Germany). Juelich Supercomputing Centre (JSC); Regensburg Univ. (Germany). Inst. fuer Theoretische Physik; Rakow, P.E.L. [Liverpool Univ. (United Kingdom). Theoretical Physics Div.; Schierholz, G. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stueben, H. [Hamburg Univ. (Germany). Regionales Rechenzentrum; Zanotti, J.M. [Adelaide Univ. (Australia). CSSM, School of Chemistry and Physics

    2014-12-15

    SU2 isospin breaking effects in baryon octet (and decuplet) masses are due to a combination of up and down quark mass differences and electromagnetic effects. These mass differences are small. Between the Sigma and Lambda the mass splitting is much larger, but this is mostly due to their different wavefunctions. However there is now also mixing between these states. We determine the QCD mixing matrix and hence find the mixing angle and mass splitting.

  20. Mixed methods for telehealth research.

    Science.gov (United States)

    Caffery, Liam J; Martin-Khan, Melinda; Wade, Victoria

    2017-10-01

    Mixed methods research is important to health services research because the integrated qualitative and quantitative investigation can give a more comprehensive understanding of complex interventions such as telehealth than can a single-method study. Further, mixed methods research is applicable to translational research and program evaluation. Study designs relevant to telehealth research are described and supported by examples. Quality assessment tools, frameworks to assist in the reporting and review of mixed methods research, and related methodologies are also discussed.

  1. Gènere i TIC: el procés d’autoinclusió de les dones en les TIC. Una aproximació des de les tecnòlogues artístiques i les tecnòlogues informàtiques

    OpenAIRE

    Vergés Bosch, Núria

    2012-01-01

    En aquesta tesi s'analitza el procés d'autoinclusió de les dones en les TIC, entès com una estratègia on les dones se situen com agents conductores de la seva pròpia inclusió TIC. Per una banda, té per objectiu explorar la relació gènere i TIC. Per altra banda, conèixer les estratègies d'autoinclusió, és a dir, les principals motivacions, possibilitadors i mecanismes d'autoinclusió que hi intervenen. Finalment, es busca comparar aquestes qüestions per a les tecnòlogues artístiques i les tecnò...

  2. Toward a Competitive Process Intensification: A New Generation of Heat Exchanger-Reactors Vers une intensification des procédés économiquement viable : une nouvelle génération de réacteur-échangeur de chaleur

    Directory of Open Access Journals (Sweden)

    Tochon P.

    2010-10-01

    Full Text Available Process Intensification (PI in chemical production is a major concern of chemical manufacturers. Among the numerous options to intensify a process, the transposition from a batch reactor to a continuous plug flow reactor is a good alternative when the selectivity and the thermal exchange are an issue. In this context, the RAPIC R&D project aims to develop an innovative low-cost component (in the 10 kg/h range. This project deals with the design from the local to the global scale and with testing, from elementary mock-ups to pilot scale. The present paper gives a detailed description of this research project and presents the main results on specification and definition of the reaction channel and the first simple mock-ups. L’intensification des procédés (IP constitue une des préoccupations majeures de l’industrie chimique. Parmi les nombreuses options possibles pour intensifier un procédé, lorsque le sujet concerne la sélectivité et l’échange thermique, la transposition d’un réacteur discontinu à un réacteur tubulaire continu paraît une bonne alternative. Dans ce contexte, le projet de R&D RAPIC consiste à développer un composant innovant à bas coût (environ 10 kg/heure. Ce projet porte sur la phase de conception, du niveau local au niveau global, et sur la phase de tests, depuis les maquettes élémentaires jusqu’aux essais pilote. Cet article propose une description détaillée de ce projet de recherche et présente les principaux résultats obtenus sur la définition et la spécification du canal de réaction, ainsi que les premières maquettes simples.

  3. La production des oléfines. Etat de la technique et développement dans le domaine des réacteurs chimiques et des procédés Olefin Production. State of Technology and Developement in the Field of Chemical Reactors and Processes

    Directory of Open Access Journals (Sweden)

    Amouyal R.

    2006-11-01

    Full Text Available La production des oléfines légères : éthylène, propylène et butadiène est actuellement entièrement basée sur le vapocraquage d'hydrocarbures dans des fours tubulaires. L'industrie doit faire face à un problème de coûts de production croissants, en grande partie dû au renchérissement des hydrocarbures et de l'énergie. D'autres procédés que le vapocraquage ont été proposés pour favoriser la diversification sur le plan des matières premières ; certains ont même été exploités industriellement. Le présent article fait le point sur l'état des développements en cours concernant plus particulièrement les procédés suivants : - craquage autothermique ; - craquage par caloporteur solide ; - craquage cyclique ; - craquage catalytique ; - prétraitement de charges lourdes ; - oléfines à partir de gaz de synthèse ; - oléfines à partir de biomasse. The production of light olefins (ethylene, propylene and butadien is now based entirely on hydrocarbon steam cracking in pipe stills. The industry must face the problem of increasing production costs, largely due to the higher costs of hydrocarbons and energy. Processes other than steam cracking have been proposed to promote diversification with regard to raw materials, and some such processes have even operated industrially. This article sums up the state of ongoing developments concerning in particular the following processes: a autothermal cracking; b cracking by a solid heat carrier; c cyclic cracking; d catalytic cracking ; e preprocessing of heavy feeds; f olefins from synthetic gas; g olefins from biomass.

  4. Mixing ventilation guide on mixing air distribution design

    CERN Document Server

    Kandzia, Claudia; Kosonen, Risto; Krikor Melikov, Arsen; Nielsen, Peter Vilhelm

    2013-01-01

    In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection of air diffusers and exhaust openings.

  5. Mixing Ventilation. Guide on mixing air distribution design

    DEFF Research Database (Denmark)

    Kandzia, Claudia; Kosonen, Risto; Melikov, Arsen Krikor

    In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection...

  6. Company Communication Mix

    OpenAIRE

    Švecová, Michaela

    2015-01-01

    Predmetom bakalárskej práce “Komunikačný mix podniku” je analýza súčasného stavu komunikačného mixu vybraného podniku a návrh nového. Práca je rozdelená na teoretickú a praktickú časť. Teoretická časť pojednáva o význame marketingovej komunikácie, popisuje a porovnáva jednotlivé nástroje komunikačného mixu. Úvod praktickej časti popisuje vybranú spoločnosť. Hlavná časť analyzuje a hodnotí súčasné nástroje propagácie. Následuje realizovaný výskum zameraný na spokojnosť zákazníkov. Záverečná ča...

  7. A method for fitting regression splines with varying polynomial order in the linear mixed model.

    Science.gov (United States)

    Edwards, Lloyd J; Stewart, Paul W; MacDougall, James E; Helms, Ronald W

    2006-02-15

    The linear mixed model has become a widely used tool for longitudinal analysis of continuous variables. The use of regression splines in these models offers the analyst additional flexibility in the formulation of descriptive analyses, exploratory analyses and hypothesis-driven confirmatory analyses. We propose a method for fitting piecewise polynomial regression splines with varying polynomial order in the fixed effects and/or random effects of the linear mixed model. The polynomial segments are explicitly constrained by side conditions for continuity and some smoothness at the points where they join. By using a reparameterization of this explicitly constrained linear mixed model, an implicitly constrained linear mixed model is constructed that simplifies implementation of fixed-knot regression splines. The proposed approach is relatively simple, handles splines in one variable or multiple variables, and can be easily programmed using existing commercial software such as SAS or S-plus. The method is illustrated using two examples: an analysis of longitudinal viral load data from a study of subjects with acute HIV-1 infection and an analysis of 24-hour ambulatory blood pressure profiles.

  8. Neutrino mixing in SO(10)

    International Nuclear Information System (INIS)

    Milton, K.; Hama, S.; Nandi, S.; Tanaka, K.

    1980-01-01

    Neutrino mixing angles were computed in terms of upquark mass ratios in a grand unified field theory based on the gauge group SO(10) supplemented by a discrete symmetry. Only large ν/sub μ/ - ν/sub tau/ mixing were found

  9. Mixed-Media File Systems

    NARCIS (Netherlands)

    Bosch, H.G.P.

    1999-01-01

    This thesis addresses the problem of implementing mixed-media storage systems. In this work a mixed-media file system is defined to be a system that stores both conventional (best-effort) file data and real-time continuous-media data. Continuous-media data is usually bulky, and servers storing and

  10. Mixed Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The treatment of mixed waste remains one of this country's most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country's largest mixed waste generator, responsible for 95 percent of the Nation's mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE's earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies

  11. Mixing in a Microfluid Device

    DEFF Research Database (Denmark)

    Hjorth, Poul G.; Deryabin, Mikhail

    Mixing of fluids in microchannels cannot rely on turbulence since the flow takes place at extremly low Reynolds numbers. Various active and passive devices have been developed to induce mixing in microfluid flow devices. We describe here a model of an active mixer where a transverse periodic flow...

  12. Mixed-Methods Research Methodologies

    Science.gov (United States)

    Terrell, Steven R.

    2012-01-01

    Mixed-Method studies have emerged from the paradigm wars between qualitative and quantitative research approaches to become a widely used mode of inquiry. Depending on choices made across four dimensions, mixed-methods can provide an investigator with many design choices which involve a range of sequential and concurrent strategies. Defining…

  13. Thermochemistry of mixed explosives

    International Nuclear Information System (INIS)

    Janney, J.L.; Rogers, R.N.

    1982-01-01

    In order to predict thermal hazards of high-energy materials, accurate kinetics constants must be determined. Predictions of thermal hazards for mixtures of high-energy materials require measurements on the mixtures, because interactions among components are common. A differential-scanning calorimeter (DSC) can be used to observe rate processes directly, and isothermal methods enable detection of mechanism changes. Rate-controlling processes will change as components of a mixture are depleted, and the correct depletion function must be identified for each specific stage of a complex process. A method for kinetics measurements on mixed explosives can be demonstrated with Composition B is an approximately 60/40 mixture of RDX and TNT, and is an important military explosive. Kinetics results indicate that the mator process is the decomposition of RDX in solution in TNT with a perturbation caused by interaction between the two components. It is concluded that a combination of chemical kinetics and experimental self-heating procedures provides a good approach to the production of predictive models for thermal hazards of high-energy materials. Systems involving more than one energy-contributing component can be studied. Invalid and dangerous predictive models can be detected by a failure of agreement between prediction and experiment at a specific size, shape, and density. Rates of thermal decomposition for Composition B appear to be modeled adequately for critical-temperature predictions with the following kinetics constants: E = 180.2 kJ mole -1 and Z = 4.62 X 10 16 s -1

  14. Mixed alcohols production from syngas

    International Nuclear Information System (INIS)

    Stevens, R.R.; Conway, M.M.

    1988-01-01

    A process is described for selectively producing mixed alcohols from synthesis gas comprising contacting a mixture of hydrogen and carbon monoxide with a catalytic amount of a catalyst containing components of (1) a catalytically active metal of molybdenum or tungsten, in free or combined form; (2) a cocatalytic metal or cobalt or nickel in free or combined form; and (3) a Fischer-Tropsch promoter of an alkali or alkaline earth series metal, in free or combined form; the components combined by dry mixing, mixing as a wet paste, wet impregnation, and then sulfided, the catalyst excluding rhodium, ruthenium and copper, at a pressure of at least about 500 psig and under conditions sufficient to form the mixed alcohols in at least 20 percent CO/sub 2/ free carbon selectivity, the mixed alcohols containing a C/sub 1/ to C/sub 2-5/ alcohol weight ratio of less than about 1:1

  15. Probabilistic broadcasting of mixed states

    International Nuclear Information System (INIS)

    Li Lvjun; Li Lvzhou; Wu Lihua; Zou Xiangfu; Qiu Daowen

    2009-01-01

    It is well known that the non-broadcasting theorem proved by Barnum et al is a fundamental principle of quantum communication. As we are aware, optimal broadcasting (OB) is the only method to broadcast noncommuting mixed states approximately. In this paper, motivated by the probabilistic cloning of quantum states proposed by Duan and Guo, we propose a new way for broadcasting noncommuting mixed states-probabilistic broadcasting (PB), and we present a sufficient condition for PB of mixed states. To a certain extent, we generalize the probabilistic cloning theorem from pure states to mixed states, and in particular, we generalize the non-broadcasting theorem, since the case that commuting mixed states can be exactly broadcast can be thought of as a special instance of PB where the success ratio is 1. Moreover, we discuss probabilistic local broadcasting (PLB) of separable bipartite states

  16. Multi-Wave Mixing Processes

    CERN Document Server

    Zhang, Yanpeng

    2009-01-01

    "Multi-Wave Mixing Processes - From Ultrafast Polarization Beats to Electromagnetically Induced Transparency" discusses the interactions of efficient multi-wave mixing (MWM) processes enhanced by atomic coherence in multilevel atomic systems. It covers topics in five major areas: attosecond and femtosecond polarization beats of four-wave mixing (FWM) processes; heterodyne detection of FWM, six-wave mixing (SWM) and eight-wave mixing (EWM) processes; Raman and Rayleigh enhanced polarization beats; coexistence and interactions of MWM processes via electromagnetically induced transparency(EIT); multi-dressing MWM processes. The book is intended for researchers, advanced undergraduate and graduate students in Nonlinear Optics. Dr. Yanpeng Zhang is a professor at the Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi'an Jiaotong University. Dr. Min Xiao is a professor of Physics at University of Arkansas, Fayetteville, U.S.A.

  17. Turbidity Current Head Mixing

    Science.gov (United States)

    Hernandez, David; Sanchez, Miguel Angel; Medina, Pablo

    2010-05-01

    coastal diffusion using image analysis. Applied Scientific Research 59,.191-204. 1998. [5] J.M. Redondo. Turbulent mixing in the Atmosphere and Ocean. Fluid Physics. 584-597. World Scientific. New York. 1994

  18. Compressibility effects on turbulent mixing

    Science.gov (United States)

    Panickacheril John, John; Donzis, Diego

    2016-11-01

    We investigate the effect of compressibility on passive scalar mixing in isotropic turbulence with a focus on the fundamental mechanisms that are responsible for such effects using a large Direct Numerical Simulation (DNS) database. The database includes simulations with Taylor Reynolds number (Rλ) up to 100, turbulent Mach number (Mt) between 0.1 and 0.6 and Schmidt number (Sc) from 0.5 to 1.0. We present several measures of mixing efficiency on different canonical flows to robustly identify compressibility effects. We found that, like shear layers, mixing is reduced as Mach number increases. However, data also reveal a non-monotonic trend with Mt. To assess directly the effect of dilatational motions we also present results with both dilatational and soleniodal forcing. Analysis suggests that a small fraction of dilatational forcing decreases mixing time at higher Mt. Scalar spectra collapse when normalized by Batchelor variables which suggests that a compressive mechanism similar to Batchelor mixing in incompressible flows might be responsible for better mixing at high Mt and with dilatational forcing compared to pure solenoidal mixing. We also present results on scalar budgets, in particular on production and dissipation. Support from NSF is gratefully acknowledged.

  19. Chlorophyll modulation of mixed layer thermodynamics in a mixed ...

    Indian Academy of Sciences (India)

    M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

    in a mixed-layer isopycnal General Circulation Model – An ... three dimensional ocean circulation theory combined with solar radiation transfer process. 1. .... temperature decrease compared with simulation without chlorophyll (bottom panel).

  20. [Marketing mix in health service].

    Science.gov (United States)

    Ameri, Cinzia; Fiorini, Fulvio

    2015-01-01

    The marketing mix is the combination of the marketing variables that a firm employs with the purpose to achieve the expected volume of business within its market. In the sale of goods, four variables compose the marketing mix (4 Ps): Product, Price, Point of sale and Promotion. In the case of providing services, three further elements play a role: Personnel, Physical Evidence and Processes (7 Ps). The marketing mix must be addressed to the consumers as well as to the employees of the providing firm. Furthermore, it must be interpreted as employees ability to satisfy customers (interactive marketing).

  1. Generalized, Linear, and Mixed Models

    CERN Document Server

    McCulloch, Charles E; Neuhaus, John M

    2011-01-01

    An accessible and self-contained introduction to statistical models-now in a modernized new editionGeneralized, Linear, and Mixed Models, Second Edition provides an up-to-date treatment of the essential techniques for developing and applying a wide variety of statistical models. The book presents thorough and unified coverage of the theory behind generalized, linear, and mixed models and highlights their similarities and differences in various construction, application, and computational aspects.A clear introduction to the basic ideas of fixed effects models, random effects models, and mixed m

  2. A multivariate nonlinear mixed effects method for analyzing energy partitioning in growing pigs

    DEFF Research Database (Denmark)

    Strathe, Anders Bjerring; Danfær, Allan Christian; Chwalibog, André

    2010-01-01

    to the multivariate nonlinear regression model because the MNLME method accounted for correlated errors associated with PD and LD measurements and could also include the random effect of animal. It is recommended that multivariate models used to quantify energy metabolism in growing pigs should account for animal......Simultaneous equations have become increasingly popular for describing the effects of nutrition on the utilization of ME for protein (PD) and lipid deposition (LD) in animals. The study developed a multivariate nonlinear mixed effects (MNLME) framework and compared it with an alternative method...... for estimating parameters in simultaneous equations that described energy metabolism in growing pigs, and then proposed new PD and LD equations. The general statistical framework was implemented in the NLMIXED procedure in SAS. Alternative PD and LD equations were also developed, which assumed...

  3. Scafom International BV v. Lorraine Tubes S.A.S.: a case review of changing circumstances under the United Nations Convention on International Sale of Goods (CISG of 1980

    Directory of Open Access Journals (Sweden)

    Amalina AHMAD TAJUDIN

    2014-12-01

    Full Text Available This paper analyses the Belgium Supreme Court decision of Scafom International BV v. Lorraine Tubes S.A.S. The case involved a contract of sale of volatile goods ie steel tubes whereby a fixed-price contract caused it to be unenforceable because of the 70% market price increase just before the goods were delivered to the buyer. While the seller requested for renegotiation, for a higher contract price, the buyer refused to come to terms with the former. The court, by virtue of the United Nations sales law, held that renegotiation was the appropriate remedy in such a situation. In addition, the paper tests the different possible outcomes of this decision under the English Sale of Goods Act 1979, as well as the US Uniform Commercial Code. The finding of this test proves that these two sales laws would have tackled the issue of volatile market differently from that of the United Nations’.

  4. Minimal modification to tribimaximal mixing

    International Nuclear Information System (INIS)

    He Xiaogang; Zee, A.

    2011-01-01

    We explore some ways of minimally modifying the neutrino mixing matrix from tribimaximal, characterized by introducing at most one mixing angle and a CP violating phase thus extending our earlier work. One minimal modification, motivated to some extent by group theoretic considerations, is a simple case with the elements V α2 of the second column in the mixing matrix equal to 1/√(3). Modifications by keeping one of the columns or one of the rows unchanged from tribimaximal mixing all belong to the class of minimal modification. Some of the cases have interesting experimentally testable consequences. In particular, the T2K and MINOS collaborations have recently reported indications of a nonzero θ 13 . For the cases we consider, the new data sharply constrain the CP violating phase angle δ, with δ close to 0 (in some cases) and π disfavored.

  5. Mixed Fluid Conditions: Capillary Phenomena

    KAUST Repository

    Santamarina, Carlos; Sun, Zhonghao

    2017-01-01

    Mixed fluid phenomena in porous media have profound implications on soil-atmosphere interaction, energy geotechnology, environmental engineering and infrastructure design. Surface tension varies with pressure, temperature, solute concentration

  6. Mixed methods research for TESOL

    CERN Document Server

    Brown, James; Farr, Fiona

    2014-01-01

    Defining and discussing the relevance of theoretical and practical issues involved in mixed methods research. Covering the basics of research methodology, this textbook shows you how to choose and combine quantitative and qualitative research methods to b

  7. Is the tribimaximal mixing accidental?

    International Nuclear Information System (INIS)

    Abbas, Mohammed; Smirnov, A. Yu.

    2010-01-01

    The tribimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on the structure of the neutrino mass matrix and on the underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM-mass relations. As a result, the mass matrix may have an 'anarchical' structure with random values of elements or it may have some symmetry that differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain 'flavor alignment' as well as hierarchical matrices with a two-component structure, where the dominant and subdominant contributions have different symmetries. This opens up new approaches to understanding the lepton mixing.

  8. « parce que son papa, madame Grégory a fait un civet, un civet avec le papa » Sur les procédures d’apprentissage du lexique : reprise et reformulation en langage oral à l’école maternelle

    Directory of Open Access Journals (Sweden)

    Péroz Pierre

    2014-07-01

    Full Text Available A l’école maternelle, les enfants n’ont pas les compétences métalinguistiques qui leur permettraient de convoquer aisément l’image du mot isolé, voire d’imaginer ses contextes d’emplois ou ses différentes acceptions, comme peuvent le faire les apprenants qui sont déjà des lecteurs-scripteurs. De ce fait, les travaux sur l’apprentissage du lexique en contexte scolaire ne portent généralement pas sur la période pré-élémentaire. Comment les élèves apprennent-ils le vocabulaire qu’on leur présente au fil des séances disciplinaires ? Comment apprennent-ils des mots nouveaux, ou comment apprennent-ils les emplois différents des mots qu’ils connaissent déjà ? La communication présente les résultats de l’analyse d’un corpus transcrit d’une analyse d’une quinzaine de séances de langage en grande et en moyenne section. Elle montre que les procédures de reprise ou de reformulation qui sont à l’origine de l’apprentissage du lexique reposent essentiellement sur des mécanismes interactionnels, quel que soit le niveau des élèves. Plus les élèves sont faibles plus, ils ont besoin du matériel verbal déjà présent dans les échanges pour construire leurs propres interventions. Mais, c’est la même procédure que mobilisent les meilleurs élèves, à ceci près qu’ils sont capables aussi dans le même temps de l’appliquer à leur propre intervention. En s’appuyant sur des éléments verbaux déjà donnés et en reformulant des propositions qu’ils ont eux-mêmes construites, ils sont capables d’introduire dans des contextes adaptés des termes nouveaux dans leur intervention. Ce faisant, ils construisent les interventions les plus longues mais aussi qualitativement les plus intéressantes sur le plan lexical. Mais qu’on ne se méprenne pas, pour l’ensemble des élèves, c’est le développement de leurs compétences langagières, leur capacité à interagir avec les autres, qui est

  9. Can small zooplankton mix lakes?

    OpenAIRE

    Simoncelli, S.; Thackeray, S.J.; Wain, D.J.

    2017-01-01

    The idea that living organisms may contribute to turbulence and mixing in lakes and oceans (biomixing) dates to the 1960s, but has attracted increasing attention in recent years. Recent modeling and experimental studies suggest that marine organisms can enhance turbulence as much as winds and tides in oceans, with an impact on mixing. However, other studies show opposite and contradictory results, precluding definitive conclusions regarding the potential importance of biomixing. For lakes, on...

  10. Mix-and-match holography

    KAUST Repository

    Peng, Yifan; Dun, Xiong; Sun, Qilin; Heidrich, Wolfgang

    2017-01-01

    target images into pairs of front and rear phase-distorting surfaces. Different target holograms can be decoded by mixing and matching different front and rear surfaces under specific geometric alignments. Our approach, which we call mixWe derive a detailed image formation model for the setting of holographic projection displays, as well as a multiplexing method based on a combination of phase retrieval methods and complex matrix factorization. We demonstrate several application scenarios in both simulation and physical prototypes.

  11. Promocja a marketing-mix

    OpenAIRE

    Cyrson, Edward F.

    1994-01-01

    Many companies have often forgotten that promotion is an element of marketing-mix. Therelore their promotional campain has not always been as effective as it could be. In designing and developing marketing communication one should consider all elements of marketing-mix as well as all promotional tools. They together create a promotional system in which all the elements are Mutually reinforcing and give the system the most efficient and effective power. The major thrust of promo...

  12. AECL's mixed waste management program

    International Nuclear Information System (INIS)

    Peori, R.; Hulley, V.

    2006-01-01

    Every nuclear facility has it, they wish that they didn't but they have generated and do possess m ixed waste , and until now there has been no permanent disposition option; it has been for the most been simply maintained in interim storage. The nuclear industry has been responsibly developing permanent solutions for solid radioactive waste for over fifty years and for non-radioactive, chemically hazardous waste, for the last twenty years. Mixed waste (radioactive and chemically hazardous waste) however, because of its special, duo-hazard nature, has been a continuing challenge. The Hazardous Waste and Segregation Program (HW and SP) at AECL's CRL has, over the past ten years, been developing solutions to deal with their own in-house mixed waste and, as a result, have developed solutions that they would like to share with other generators within the nuclear industry. The main aim of this paper is to document and describe the early development of the solutions for both aqueous and organic liquid wastes and to advertise to other generators of this waste type how these solutions can be implemented to solve their mixed waste problems. Atomic Energy of Canada Limited (AECL) and in particular, CRL has been satisfactorily disposing of mixed waste for the last seven years. CRL has developed a program that not only disposes of mixed waste, but offers a full service mixed waste management program to customers within Canada (that could eventually include U.S. sites as well) that has developed the experience and expertise to evaluate and optimize current practices, dispose of legacy inventories, and set up an efficient segregation system to reduce and effectively manage, both the volumes and expense of, the ongoing generation of mixed waste for all generators of mixed waste. (author)

  13. Overview of mixed waste issues

    International Nuclear Information System (INIS)

    Piciulo, P.L.; Bowerman, B.S.; Kempf, C.R.; MacKenzie, D.R.; Siskind, B.

    1986-01-01

    Based on BNL's study it was concluded that there are LLWs which contain chemically hazardous components. Scintillation liquids may be considered an EPA listed hazardous waste and are, therefore, potential mixed wastes. Since November, 1985 no operating LLW disposal site will accept these wastes for disposal. Unless such wastes contain de minimis quantities of radionuclides, they cannot be disposed of at an EPA an EPA permitted site. Currently generators of LSC wastes can ship de minimis wastes to be burned at commercial facilities. Oil wastes will also eventually be an EPA listed waste and thus will have to be considered a potential radioactive mixed wasted unless NRC establishes de minimis levels of radionuclides below which oils can be managed as hazardous wastes. Regarding wastes containing lead metal there is some question as to the extent of the hazard posed by lead disposed in a LLW burial trench. Chromium-containing wastes would have to be tested to determine whether they are potential mixed wastes. There may be other wastes that are mixed wastes; the responsibility for determining this rests with the waste generator. It is believed that there are management options for handling potential mixed wastes but there is no regulatory guidance. BNL has identified and evaluated a variety of treatment options for the management of potential radioactive mixed wastes. The findings of that study showed that application of a management option with the purpose of addressing EPA concern can, at the same time, address stabilization and volume reduction concerns of NRC

  14. La notion de temporalité au cœur de l’analyse des discours représentés à l’oral : essai de typologie, procédés rhétoriques et portées argumentatives des DR dans le débat présidentiel français de 2007

    Directory of Open Access Journals (Sweden)

    Caillat Domitille

    2012-07-01

    Full Text Available Dans le cadre d’un débat, la représentation de propos peut être considérée comme une véritable « arme » rhétorique, tant le recours à ce procédé permet au locuteur de jouer de différentes retombées argumentatives. Aussi, à partir de la transcription de la rencontre entre Nicolas Sarkozy (NS et Ségolène Royal (SR lors du débat présidentiel de l’entre-deux tours de 2007, nous proposons-nous d’étudier les différentes formes de DR utilisées afin d’en dresser une typologie à visée argumentative. Pour ce faire, nous nous placerons dans une optique quelque peu divergente des classifications traditionnelles, puisque nous utiliserons la notion de « temporalité » — en tant que positionnement de l’énonciation de référence par rapport à l’intervention en cours — comme principal critère distinctif des occurrences et des effets dont celles-ci sont directement responsables. En plaçant de la sorte la temporalité au centre de l’étude des discours représentés (dorénavant DR, nous serons tout d’abord amenée à reconsidérer les critères traditionnellement pris en compte dans les classifications temporelles, avant de revenir sur l’importance de la nature des sources énonciatives de référence ; nous reviendrons en outre sur le critère de « virtualité » fréquemment utilisé comme un élément distinctif. Nous procéderons alors, dans le but d’expliquer au mieux la portée de chaque occurrence de DR, à un inventaire des diverses formes recensées, en conduisant pour chaque type de source énonciative une étude des différentes temporalités observables.

  15. Ifp's New Flexible Hydrocracking Process Combines Maximum Conversion with Production of High Viscosity, High Vi Lube Stocks Le nouveau procédé IFP d'hydrocraquage à haute flexibilité combine conversion maximum et production de bases, huile à haute viscosité et à indice de viscosité élevé

    Directory of Open Access Journals (Sweden)

    Hennico A.

    2006-11-01

    Full Text Available Institut Français du Pétrole (IFP has developed a new dual catalytic system for its hydrocracking process that enables high conversion to middle distillates and production of high viscosity, high VI lube stocks. Although the hydrocracking process is mainly devoted to the conversion of vacuum distillates, deasphalted oil or mixture of both into high quality middle distillates, it can also produce a residue, that after dewaxing will be a very high VI lube base oil. In this presentation major emphasis is put on the possibility to produce very high VI lubes with high viscosity thanks to the development of the new catalytic system. Large flexibility in feedstock selection and easy control of operating variables allow the production of all grades of lube oils associated with high quality middle distillates for a large range of conversion levels. L'Institut Français du Pétrole (IFP a mis au point, pour son procédé d'hydrocraquage, un nouveau système catalytique à 2 catalyseurs qui permet une forte conversion en distillats moyens et la production de fractions lubrifiantes à haute viscosité et indice de viscosité élevé. Si le procédé d'hydrocraquage est essentiellement utilisé pour la conversion de distillats sous vide, d'huile désasphaltée ou d'un mélange des deux en distillats moyens de haute qualité, il peut aussi produire un résidu qui, après déparaffinage, fournira une base pour lubrifiant à indice de viscosité très élevé. Cet article souligne particulièrement la possibilité de produire des lubrifiants à indice de viscosité très élevé et haute viscosité, grâce à ce nouveau système catalytique. Une grande flexibilité dans le choix des produits à traiter et la facilité de contrôle des paramètres opératoires permet la production de toutes les qualités d'huiles lubrifiantes associées à des distillats moyens de haute qualité, pour une large gamme de niveaux de conversion.

  16. New Hampshire binder and mix review.

    Science.gov (United States)

    2012-08-01

    This review was initiated to compare relative rut testing and simple performance tests (now known as Asphalt Mix : Performance Tests) for the New Hampshire inch mix with 15% Recycled Asphalt Pavement (RAP). The tested mixes were : made from ...

  17. Performance life of HMA mixes : final report.

    Science.gov (United States)

    2016-01-01

    A number of hot mix asphalt (HMA) types, such as permeable friction course (PFC), stone mastic asphalts : (SMA), performance design mixes and conventional dense graded mixes are currently used to construct or overlay : roads. One of the important inp...

  18. Mixed-mode modelling mixing methodologies for organisational intervention

    CERN Document Server

    Clarke, Steve; Lehaney, Brian

    2001-01-01

    The 1980s and 1990s have seen a growing interest in research and practice in the use of methodologies within problem contexts characterised by a primary focus on technology, human issues, or power. During the last five to ten years, this has given rise to challenges regarding the ability of a single methodology to address all such contexts, and the consequent development of approaches which aim to mix methodologies within a single problem situation. This has been particularly so where the situation has called for a mix of technological (the so-called 'hard') and human­ centred (so-called 'soft') methods. The approach developed has been termed mixed-mode modelling. The area of mixed-mode modelling is relatively new, with the phrase being coined approximately four years ago by Brian Lehaney in a keynote paper published at the 1996 Annual Conference of the UK Operational Research Society. Mixed-mode modelling, as suggested above, is a new way of considering problem situations faced by organisations. Traditional...

  19. Turbulent mixed convection from a large, high temperature, vertical flat surface

    International Nuclear Information System (INIS)

    Evans, G.; Greif, R.; Siebers, D.; Tieszen, S.

    2005-01-01

    Turbulent mixed convection heat transfer at high temperatures and large length scales is an important and seldom studied phenomenon that can represent a significant part of the overall heat transfer in applications ranging from solar central receivers to objects in fires. This work is part of a study to validate turbulence models for predicting heat transfer to or from surfaces at large temperature differences and large length scales. Here, turbulent, three-dimensional, mixed convection heat transfer in air from a large (3m square) vertical flat surface at high temperatures is studied using two RANS turbulence models: a standard k-ε model and the v2-bar -f model. Predictions for three cases spanning the range of the experiment (Siebers, D.L., Schwind, R.G., Moffat, R.F., 1982. Experimental mixed convection from a large, vertical plate in a horizontal flow. Paper MC13, vol. 3, Proc. 7th Int. Heat Transfer Conf., Munich; Siebers, D.L., 1983. Experimental mixed convection heat transfer from a large, vertical surface in a horizontal flow. PhD thesis, Stanford University) from forced (GrH/ReL2=0.18) to mixed (GrH/ReL2=3.06) to natural (GrH/ReL2=∼) convection are compared with data. The results show a decrease in the heat transfer coefficient as GrH/ReL2 is increased from 0.18 to 3.06, for a free-stream velocity of 4.4m/s. In the natural convection case, the experimental heat transfer coefficient is approximately constant in the fully turbulent region, whereas the calculated heat transfer coefficients show a slight increase with height. For the three cases studied, the calculated and experimental heat transfer coefficients agree to within 5-35% over most of the surface with the v2-bar -f model results showing better agreement with the data. Calculated temperature and velocity profiles show good agreement with the data

  20. Bioactivity-guided mixed synthesis accelerate the serendipity in lead optimization: Discovery of fungicidal homodrimanyl amides.

    Science.gov (United States)

    Li, Dangdang; Zhang, Shasha; Song, Zehua; Wang, Guotong; Li, Shengkun

    2017-08-18

    The bioactivity-guided mixed synthesis was conceived, in which the designed mix-reactions were run in parallel for simultaneous construction of different kinds of analogs. The valuable ones were protruded by biological screening. This tactic will facilitate more rapid incorporation of bioactive candidates into pesticide chemists' repertoire, exemplified by the optimization of less explored homodrimanes as antifungal ingredients. The discovery of D9 as a potent fungicidal agent can be completed in <2 weeks by one student, with EC 50 of 3.33 mg/L and 2.45 mg/L against S. sclerotiorum and B. cinerea, respectively. To confirm the practicability, time-efficiency, and reliability, specific homodrimanes (82 derivatives) were synthesized and elucidated separately and determined for EC 50 values. The SAR correlated well with the intentionally mixed synthesis and the potential was further confirmed by the in vivo bioassay. This methodology will foster more efficient exploration of biologically relevant chemical space of natural products in pesticide discovery, and can also be tailored readily for the lead optimization in medicinal chemistry. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  1. Managing a mixed waste program

    International Nuclear Information System (INIS)

    Koch, J.D.

    1994-01-01

    IT Corporation operates an analytical laboratory in St. Louis capable of analyzing environmental samples that are contaminated with both chemical and radioactive materials. Wastes generated during these analyses are hazardous in nature; some are listed wastes others exhibit characteristic hazards. When the original samples contain significant quantities of radioactive material, the waste must be treated as a mixed waste. A plan was written to document the waste management program describing the management of hazardous, radioactive and mixed wastes. This presentation summarizes the methods employed by the St. Louis facility to reduce personnel exposures to the hazardous materials, minimize the volume of mixed waste and treat the materials prior to disposal. The procedures that are used and the effectiveness of each procedure will also be discussed. Some of the lessons that have been learned while dealing with mixed wastes will be presented as well as the solutions that were applied. This program has been effective in reducing the volume of mixed waste that is generated. The management program also serves as a method to manage the costs of the waste disposal program by effectively segregating the different wastes that are generated

  2. Mixed waste, preparing for 1996

    International Nuclear Information System (INIS)

    Duke, D.L.

    1995-01-01

    The Environmental Protection Agency has recently approved an extension to the enforcement policy for the storage of restricted mixed waste. Under this policy, EPA assigns a reduced enforcement priority to violations of the 40CFR268.50 prohibition on storage of restricted waste. Eligibility for the lower enforcement priority afforded by the policy is subject to specified conditions. The recent extension is for a two year period, and agency personnel have advised that it may be difficult to extend the enforcement policy again. This paper reviews anticipated changes in mixed waste treatment and disposal capabilities. Types of mixed waste that may be generated, or in storage, at commercial nuclear power plants are identified. This information is evaluated to determine if the two year extension in the storage enforcement policy will be adequate for the nuclear power industry to treat or dispose of the mixed waste inventories that are identified, and if not, where potential problem areas may reside. Recommendations are then made on mixed waste management strategies

  3. Économie d'un procédé d'hydrolyse enzymatique et fermentation de la paille de blé pour la production d'alcool carburant Economics of a Process for Producing Alcohol Fuels by Enzymatic Hydrolysis and Fermentation of Wheat Straw

    Directory of Open Access Journals (Sweden)

    Arlie J. P.

    2006-11-01

    Full Text Available Après définition des grandes lignes d'un procédé de base d'hydrolyse-fermentation de la paille de blé, l'analyse de sensibilité montre que le rendement de l'hydrolyse a une grande importance sur les bilans énergétique et économique. Des rendements de l'ordre de 85 % permettent d'obtenir des valeurs d'investissement par tonne de pétrole économisée tout à fait comparables à celles obtenues par d'autres techniques de valorisation de la biomasse en alcool, telle la synthèse du méthanol obtenu après gazéification du bois à l'oxygène. The basic features of a process for production from cereal straw of an acetone-butanol mixture for use as a gasoline substitute are described. They include pretreatment and enzymatic hydrolysis of the substrate followed by fermentation of the sugars produced. A cost evaluation based on the performances of a reference process is presented. Then, an analysis of the sensitivity of the cost price of the process to the variation of the important parameters such as production capacity, enzyme productivity, hydrolysis yield is carried out. The energy balance of the process is presented.

  4. Investigation of coolant mixing in WWER-440/213 RPV with improved turbulence model

    International Nuclear Information System (INIS)

    Kiss, B.; Aszodi, A.

    2011-01-01

    A detailed and complex RPV model of WWER-440/213 type reactor was developed in Budapest University of Technology and Economics Institute of Nuclear Techniques in the previous years. This model contains the main structural elements as inlet and outlet nozzles, guide baffles of hydro-accumulators coolant, alignment drifts, perforated plates, brake- and guide tube chamber and simplified core. With the new vessel model a series of parameter studies were performed considering turbulence models, discretization schemes, and modeling methods with ANSYS CFX. In the course of parameter studies the coolant mixing was investigated in the RPV. The coolant flow was 'traced' with different scalar concentration at the inlet nozzles and its distribution was calculated at the core bottom. The simulation results were compared with PAKS NPP measured mixing factors data (available from FLOMIX project. Based on the comparison the SST turbulence model was chosen for the further simulations, which unifies the advantages of two-equation (kω and kε) models. The most widely used turbulence models are Reynolds-averaged Navier-Stokes models that are based on time-averaging of the equations. Time-averaging filters out all turbulent scales from the simulation, and the effect of turbulence on the mean flow is then re-introduced through appropriate modeling assumptions. Because of this characteristic of SST turbulence model a decision was made in year 2011 to investigate the coolant mixing with improved turbulence model as well. The hybrid SAS-SST turbulence model was chosen, which is capable of resolving large scale turbulent structures without the time and grid-scale resolution restrictions of LES, often allowing the use of existing grids created for Reynolds-averaged Navier-Stokes simulations. As a first step the coolant mixing was investigated in the downcomer only. Eddies are occurred after the loop connection because of the steep flow direction change. This turbulent, vertiginous flow was

  5. USING SAS ENTERPRISE GUIDE SOFTWARE IN CLASSIFICATION

    OpenAIRE

    Ana Maria Mihaela IORDACHE

    2011-01-01

    Data mining, also known as "discovery knowledge in large databases "is a modern and powerful information technology and communications tool that can be used to extract useful information but still unknown. This automates the process of discovery some relations and mixtures from the raw data and founded results could be incorporated into an automated decision support. This paper aims to present and perform the classification of European Union countries based on the social indicators calculated...

  6. Use of SAS in the IDB

    International Nuclear Information System (INIS)

    Morrison, G.W.; Notz, K.J.; Mastal, E.F.; Trice, V.G.

    1984-01-01

    The Integrated Data Base (IDB) Program provides official US Department of Energy (DOE) data on spent fuel and radioactive waste inventories, projections, and characteristics. This information is provided through the cooperative efforts of the IDB Program and DOE lead offices, lead sites, major programs, and generator sites. The program is entering its fifth yeaar, and major accomplishments are summarized in three broad areas: (1) the annual inventory report, including ORIGEN2 applications and a Quality Assurance (QA) plan; (2) the summary data file and direct user access; and (3) data processing methodology and support to other programs. Plans for future work in these areas are outlined briefly, including increased utilization of personal computers. Some examples of spent fuel data are given in terms of projected quantities for two growth scenarios, burnup and age profile of the existing inventory, and the approximate specific thermal power relative to high-level waste (HLW) from various sources. 2 references, 3 figures

  7. SAS-Based Studies of Protein Fibrillation

    DEFF Research Database (Denmark)

    Marasini, Carlotta; Vestergaard, Bente

    2017-01-01

    Protein fibrillation is associated with a number of fatal amyloid diseases (e.g. Alzheimer's and Parkinson's diseases). From a structural point of view, the aggregation process starts from an ensemble of native states that convert into transiently formed oligomers, higher order assemblies and pro...... and highlight existing reports, exemplifying the wealth of information that can be derived from the method....

  8. Statistical analysis of medical data using SAS

    CERN Document Server

    Der, Geoff

    2005-01-01

    An Introduction to SASDescribing and Summarizing DataBasic InferenceScatterplots Correlation: Simple Regression and SmoothingAnalysis of Variance and CovarianceMultiple RegressionLogistic RegressionThe Generalized Linear ModelGeneralized Additive ModelsNonlinear Regression ModelsThe Analysis of Longitudinal Data IThe Analysis of Longitudinal Data II: Models for Normal Response VariablesThe Analysis of Longitudinal Data III: Non-Normal ResponseSurvival AnalysisAnalysis Multivariate Date: Principal Components and Cluster AnalysisReferences

  9. Nuclear level mixing resonance spectroscopy

    International Nuclear Information System (INIS)

    Coussement, R.; Put, P.; Scheveneels, G.; Hardeman, F.

    1985-01-01

    The existent methods for measuring quadrupole interactions are not suited to nuclei with lifetimes in the micro-seconds to minutes region. AD/NQR, a possible candidate in this lifetime gap, has not yet succeeded in overcoming its predicted difficulties. A new resonant method, recently developed and based on the principles of level mixing (cfr atomic spectroscopy) covers this less accessible lifetime range. Many other kinds of resonances can be described according to the level mixing formalism. The particular example of NMR as a level mixing resonance (LMR) is discussed. The underlying theory of LMR and its important consequences, leading to some interesting features of the method, is briefly formulated. Two successfully performed measurements demonstrate the feasibility and the predicted characteristics of this new promising method. (orig.)

  10. Colour mixing based on daylight

    International Nuclear Information System (INIS)

    Meyn, Jan-Peter

    2008-01-01

    Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large region of the colour space can be covered by mixing three primary colours derived from lossless spectral decomposition of daylight. These primaries are specified by hue, saturation and luminosity. Duality of additive and subtractive mixing is formulated quantitatively. Experimental demonstrations of calculated results are suggested. This paper is intended for undergraduate optics courses, and advanced interdisciplinary seminars on arts and physics

  11. Regulatory aspects of mixed waste

    International Nuclear Information System (INIS)

    Boyle, R.R.; Orlando, D.A.

    1990-01-01

    Mixed waste is waste that satisfies the definition of low-level radioactive waste in the Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA) and contains hazardous waste that is either: (1) listed as a hazardous waste in 40 CFR 261, Subpart D; or (2) causes the waste to exhibit any of the characteristics identified in 40 CFR 261, Subpart C. Low-level radioactive waste is defined in the LLRWPAA as radioactive material that is not high level waste, spent nuclear fuel, or byproduct material, as defined in Section 11e(2) of the Atomic Energy Act of 1954, and is classified as low-level waste by the U.S. Nuclear Regulatory Commission (NRC). This paper discusses dual regulatory (NRC and Environmental Protection Agency) responsibility, overview of joint NRC/EPA guidance, workshops, national mixed waste survey, and principal mixed waste uncertainties

  12. Mixed and mixed-hybrid elements for the diffusion equation

    International Nuclear Information System (INIS)

    Coulomb, F.; Fedon-Magnaud, C.

    1987-04-01

    To solve the diffusion equation, one often uses a Lagrangian finite element method. We want to introduce the mixed elements which allow a simultaneous approximation of the same order for the flux and its gradient. Though the linear systems are not positive definite, it is possible to make them so by eliminating some of the unknowns

  13. La biblioteca en procés de canvi

    Directory of Open Access Journals (Sweden)

    Alonso Arévalo, Julio

    2016-06-01

    Full Text Available El context de les biblioteques està mutant de la mateixa manera que passa en altres entorns socials. Les biblioteques s'han d'adaptar a un món en què cada vegada més i més informació està en format digital, accessible en qualsevol moment i en qualsevol lloc. Per això les biblioteques estan redissenyant els seus espais i les seves regles per tal de donar cabuda als nous comportaments, necessitats i hàbits que demanen els usuaris i les seves comunitats. Per aquest motiu, moltes biblioteques estan creant espais rics amb eines i tecnologies avançades que inspiren i faciliten l'aprenentatge, el descobriment, la creació i l'experimentació. Entre les propostes més innovadores hi ha la que fa referència a la biblioteca com a generadora de contingut, un espai per a la creació i dinamització de la seva comunitat.El contexto de las bibliotecas está mutando al igual que ocurre en otros entornos sociales. Las bibliotecas deben adaptarse a un mundo en el que cada vez más y más información está en formato digital, accesible en cualquier momento y en cualquier lugar, por ello las bibliotecas están rediseñando sus espacios y sus reglas para dar cabida a los nuevos comportamientos, necesidades y hábitos que demandan los usuarios y sus comunidades. Por este motivo, muchas bibliotecas están creando espacios ricos con herramientas y tecnologías avanzadas que inspiran y facilitan el aprendizaje, el descubrimiento, la creación y la experimentación. Entre las propuestas más innovadoras está la relativa a la biblioteca como generadora de contenido, un espacio para la creación y dinamización de su comunidad.Like other social environments, libraries are being required to adapt to a world where information is becoming increasingly digitized and can be accessed at any moment in any place. For this reason many library institutions are redesigning the spaces in which they offer services and the rules by which they operate, tailoring these to suit the changing behaviour, needs and habits of users and communities. Many centres are creating spaces enhanced by advanced tools and applications that inspire and facilitate learning, discovery, creation and experimentation. One of the most innovative models for change considers the library as a vehicle for content generation and a space where communities can be created and promoted.

  14. Obligations procédurales et droit au divorce

    OpenAIRE

    Lauer , Mélanie

    2008-01-01

    There is no longer any doubt that divroce is an integral part of the family scene. But for that, divorce law has swayed between permissive law and coercive law. The law of July 11 1975 inspired a movement of liberalisation that would reign over diverce law. But it is with law of May 26 2004 that liberalisation would become more extensice. Even if this law is keeping with a form of continuity by maintaining the plurality of divorce cases, it opens the doors of divorce wider. The rules of subst...

  15. Analysis of stratified flow mixing

    International Nuclear Information System (INIS)

    Soo, S.L.; Lyczkowski, R.W.

    1985-01-01

    The Creare 1/5-scale Phase II experiments which model fluid and thermal mixing of relatively cold high pressure injection (HPI) water into a cold leg of a full-scale pressurized water reactor (PWR) having loop flow are analyzed and found that they cannot achieve complete similarity with respect to characteristic Reynolds and Froude numbers and developing hydrodynamic entry length. Several analyses show that these experiments fall into two distinct regimes of mixing: momentum controlled and gravity controlled (stratification). 18 refs., 9 figs

  16. Mix-and-match holography

    KAUST Repository

    Peng, Yifan

    2017-11-22

    Computational caustics and light steering displays offer a wide range of interesting applications, ranging from art works and architectural installations to energy efficient HDR projection. In this work we expand on this concept by encoding several target images into pairs of front and rear phase-distorting surfaces. Different target holograms can be decoded by mixing and matching different front and rear surfaces under specific geometric alignments. Our approach, which we call mix-and-match holography, is made possible by moving from a refractive caustic image formation process to a diffractive, holographic one. This provides the extra bandwidth that is required to multiplex several images into pairing surfaces.

  17. Mixed wasted integrated program: Logic diagram

    International Nuclear Information System (INIS)

    Mayberry, J.; Stelle, S.; O'Brien, M.; Rudin, M.; Ferguson, J.; McFee, J.

    1994-01-01

    The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development's Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR)

  18. Configuration mixing for spin-isospin modes

    International Nuclear Information System (INIS)

    Ichimura, Munetake

    2005-01-01

    Development of theories of configuration mixing is reviewed, concentrating on their application to spin-isospin modes, especially to the Gamow-Teller transitions. This talk is divided into three historical stages, the first order configuration mixing as the first stage, the second order configuration mixing as the second stage, and the delta-isobar-hole mixing as the third stage

  19. Colour Mixing Based on Daylight

    Science.gov (United States)

    Meyn, Jan-Peter

    2008-01-01

    Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large…

  20. Para-mixed linear spaces

    Directory of Open Access Journals (Sweden)

    Crasmareanu Mircea

    2017-12-01

    Full Text Available We consider the paracomplex version of the notion of mixed linear spaces introduced by M. Jurchescu in [4] by replacing the complex unit i with the paracomplex unit j, j2 = 1. The linear algebra of these spaces is studied with a special view towards their morphisms.

  1. Mixed Waste Landfill Integrated Demonstration

    International Nuclear Information System (INIS)

    1994-02-01

    The mission of the Mixed Waste Landfill Integrated Demonstration (MWLID) is to demonstrate, in contaminated sites, new technologies for clean-up of chemical and mixed waste landfills that are representative of many sites throughout the DOE Complex and the nation. When implemented, these new technologies promise to characterize and remediate the contaminated landfill sites across the country that resulted from past waste disposal practices. Characterization and remediation technologies are aimed at making clean-up less expensive, safer, and more effective than current techniques. This will be done by emphasizing in-situ technologies. Most important, MWLID's success will be shared with other Federal, state, and local governments, and private companies that face the important task of waste site remediation. MWLID will demonstrate technologies at two existing landfills. Sandia National Laboratories' Chemical Waste Landfill received hazardous (chemical) waste from the Laboratory from 1962 to 1985, and the Mixed-Waste Landfill received hazardous and radioactive wastes (mixed wastes) over a twenty-nine year period (1959-1988) from various Sandia nuclear research programs. Both landfills are now closed. Originally, however, the sites were selected because of Albuquerque's and climate and the thick layer of alluvial deposits that overlay groundwater approximately 480 feet below the landfills. This thick layer of ''dry'' soils, gravel, and clays promised to be a natural barrier between the landfills and groundwater

  2. Advances in compressible turbulent mixing

    International Nuclear Information System (INIS)

    Dannevik, W.P.; Buckingham, A.C.; Leith, C.E.

    1992-01-01

    This volume includes some recent additions to original material prepared for the Princeton International Workshop on the Physics of Compressible Turbulent Mixing, held in 1988. Workshop participants were asked to emphasize the physics of the compressible mixing process rather than measurement techniques or computational methods. Actual experimental results and their meaning were given precedence over discussions of new diagnostic developments. Theoretical interpretations and understanding were stressed rather than the exposition of new analytical model developments or advances in numerical procedures. By design, compressibility influences on turbulent mixing were discussed--almost exclusively--from the perspective of supersonic flow field studies. The papers are arranged in three topical categories: Foundations, Vortical Domination, and Strongly Coupled Compressibility. The Foundations category is a collection of seminal studies that connect current study in compressible turbulent mixing with compressible, high-speed turbulent flow research that almost vanished about two decades ago. A number of contributions are included on flow instability initiation, evolution, and transition between the states of unstable flow onset through those descriptive of fully developed turbulence. The Vortical Domination category includes theoretical and experimental studies of coherent structures, vortex pairing, vortex-dynamics-influenced pressure focusing. In the Strongly Coupled Compressibility category the organizers included the high-speed turbulent flow investigations in which the interaction of shock waves could be considered an important source for production of new turbulence or for the enhancement of pre-existing turbulence. Individual papers are processed separately

  3. Kriging with mixed effects models

    Directory of Open Access Journals (Sweden)

    Alessio Pollice

    2007-10-01

    Full Text Available In this paper the effectiveness of the use of mixed effects models for estimation and prediction purposes in spatial statistics for continuous data is reviewed in the classical and Bayesian frameworks. A case study on agricultural data is also provided.

  4. Ethanol from mixed waste paper

    International Nuclear Information System (INIS)

    Kerstetter, J.D.; Lyons, J.K.

    1991-01-01

    The technology, markets, and economics for converting mixed waste paper to ethanol in Washington were assessed. The status of enzymatic and acid hydrolysis projects were reviewed. The market for ethanol blended fuels in Washington shows room for expansion. The economics for a hypothetical plant using enzymatic hydrolysis were shown to be profitable

  5. Mixed normal inference on multicointegration

    NARCIS (Netherlands)

    Boswijk, H.P.

    2009-01-01

    Asymptotic likelihood analysis of cointegration in I(2) models, see Johansen (1997, 2006), Boswijk (2000) and Paruolo (2000), has shown that inference on most parameters is mixed normal, implying hypothesis test statistics with an asymptotic 2 null distribution. The asymptotic distribution of the

  6. Energy mix and employment effects

    International Nuclear Information System (INIS)

    Wodopia, F.J.

    2005-01-01

    ''Energy Mix and Employment Effects'' is a subject not to be reduced to the so-called ''job argument''. It also involves the question whether it will be possible to achieve consensus again about the composition of a balanced sustainable energy mix. This term must not be interpreted in a static sense; after all, the framework conditions of energy policy are changing. However, this must not render energy policy unsteady. This requirement should be imposed on economic policy in general, i.e. political interventions, it they are really unavoidable, must be predictable on a long term. This contribution also examines the meaning of the term ''energy mix.'' Aspects of the debate about the climate, especially potential factors influencing the climate, are discussed against the backdrop of scientific validity. Other key points covered are the description and analysis of the energy policy framework. One major aspect under study are all kinds of ''subsidies'' of energy resources and the consequences to the whole economy arising from these financial support mechanisms. The findings are projected onto the employment effects. Finally, the question is raised how to design an energy mix sustainable for the future, and how to achieve it politically and in society. (orig.)

  7. Mixing in T-junctions

    NARCIS (Netherlands)

    Kok, Jacobus B.W.; van der Wal, S.

    1996-01-01

    The transport processes that are involved in the mixing of two gases in a T-junction mixer are investigated. The turbulent flow field is calculated for the T-junction with the k- turbulence model by FLOW3D. In the mathematical model the transport of species is described with a mixture fraction

  8. Mixing Tamiflu with Sweet Liquids

    Centers for Disease Control (CDC) Podcasts

    If your doctor prescribes Tamiflu® capsules for your child and your child cannot swallow them, this podcast describes how to mix the contents of the capsules with a sweet thick liquid so they can be given that way.

  9. Mixed Hitting-Time Models

    NARCIS (Netherlands)

    Abbring, J.H.

    2009-01-01

    We study mixed hitting-time models, which specify durations as the first time a Levy process (a continuous-time process with stationary and independent increments) crosses a heterogeneous threshold. Such models of substantial interest because they can be reduced from optimal-stopping models with

  10. Advances in compressible turbulent mixing

    Energy Technology Data Exchange (ETDEWEB)

    Dannevik, W.P.; Buckingham, A.C.; Leith, C.E. [eds.

    1992-01-01

    This volume includes some recent additions to original material prepared for the Princeton International Workshop on the Physics of Compressible Turbulent Mixing, held in 1988. Workshop participants were asked to emphasize the physics of the compressible mixing process rather than measurement techniques or computational methods. Actual experimental results and their meaning were given precedence over discussions of new diagnostic developments. Theoretical interpretations and understanding were stressed rather than the exposition of new analytical model developments or advances in numerical procedures. By design, compressibility influences on turbulent mixing were discussed--almost exclusively--from the perspective of supersonic flow field studies. The papers are arranged in three topical categories: Foundations, Vortical Domination, and Strongly Coupled Compressibility. The Foundations category is a collection of seminal studies that connect current study in compressible turbulent mixing with compressible, high-speed turbulent flow research that almost vanished about two decades ago. A number of contributions are included on flow instability initiation, evolution, and transition between the states of unstable flow onset through those descriptive of fully developed turbulence. The Vortical Domination category includes theoretical and experimental studies of coherent structures, vortex pairing, vortex-dynamics-influenced pressure focusing. In the Strongly Coupled Compressibility category the organizers included the high-speed turbulent flow investigations in which the interaction of shock waves could be considered an important source for production of new turbulence or for the enhancement of pre-existing turbulence. Individual papers are processed separately.

  11. Pressure supression pool thermal mixing

    International Nuclear Information System (INIS)

    Cook, D.H.

    1984-10-01

    A model is developed and verified to describe the thermal mixing that occurs in the pressure suppression pool (PSP) of a commercial BWR. The model is designed specifically for a Mark-I containment and is intended for use in severe accident sequence analyses. The model developed in this work produces space and time dependent temperature results throughout the PSP and is useful for evaluating the bulk PSP thermal mixing, the condensation effectiveness of the PSP, and the long-term containment integrity. The model is designed to accommodate single or multiple discharging T-quenchers, a PSP circumferential circulation induced by the residual heat removal system discharge, and the thermal stratification of the pool that occurs immediately after the relief valves close. The PSP thermal mixing is verified by comparing the model-predicted temperatures to experimental temperatures that were measured in an operating BWR suppression pool. The model is then used to investigate several PSP thermal mixing problems that include the time to saturate at full relief valve flow, the temperature response to a typical stuck open relief valve scenario, and the effect of operator rotation of the relief valve discharge point

  12. Pressure suppression pool thermal mixing

    International Nuclear Information System (INIS)

    Cook, D.H.

    1984-01-01

    A model is developed and verified to describe the thermal mixing that occurs in the pressure suppression pool (PSP) of a commercial BWR. The model is designed specifically for a Mark-I containment and is intended for use in severe accident sequence analyses. The model produces space and time dependent temperature results throughout the PSP and is useful for evaluating the bulk PSP thermal mixing, the condensation effectiveness of the PSP, and the long-term containment integrity. The model is designed to accommodate single or multiple discharging T-quenchers, a PSP circumferential circulation induced by the residual heat removal system discharge, and the thermal stratification of the pool that occurs immediately after the relief valves close. The PSP thermal mixing model is verified by comparing the model predicted temperatures to experimental temperatures that were measured in an operating BWR suppression pool. The model is then used to investigate several PSP thermal mixing problems that include the time to saturate at full relief valve flow, the temperature response to a typical stuck open relief valve scenario, and the effect of operator rotation of the relief valve discharge point

  13. Geoelectrical signatures of reactive mixing

    Science.gov (United States)

    Ghosh, U.; Bandopadhyay, A.; Jougnot, D.; Le Borgne, T.; Meheust, Y.

    2017-12-01

    Characterizing the effects of fluid mixing on geochemical reactions in the subsurface is of paramount importance owing to their pivotal role in processes such as contaminant migration or aquifer remediation, to name a few [1]. Large velocity gradients in the porous media are expected to lead to enhanced diffusive mixing accompanied by augmented reaction rates [2]. Despite its importance, accurate monitoring of such processes still remains an open challenge, mainly due to the opacity of the medium and to the lack of access to it. However, in recent years, geophysical methods based on electrical conductivity and polarization have come up as a promising tool for mapping and monitoring such reactions in the subsurface. In this regard, one of the main challenges is to properly characterize the multiple sources of electrical signals and in particular isolate the influence of reactive mixing on the electrical conductivity from those of other sources [3]. In this work, we explore the coupling between fluid mixing, reaction and charge migration in porous media to evaluate the potential of obtaining a spatially-resolved measurement of local reaction rates in the subsurface from electrical measurements. To this end, we employ a lamellar description of the mixing interface [4] with novel semi-analytical upscaling techniques to quantify changes in electrical conductivity induced by chemical reactions across mixing fronts. The changes in electrical conductivity are strongly dependent on the concentration of ionic species as well as on the polarization of the pore (water) solution around the grains, which in turn are controlled by local reaction rates and, consequently, by the local velocity gradients. Hence, our results essentially suggest that local variations in the electrical conductivity may be quantitatively related to the mixing and reaction dynamics, and thus be used as a measurement tool to characterize these dynamics. References 1. M. Dentz, T. Le Borgne, A. Englert

  14. Krāsas un skaņas sintēzes metodes izmantošanas iespējas gleznošanas nodarbībās mākslas skolā

    OpenAIRE

    Zilberte, Baiba

    2007-01-01

    Viens no vizuālās mākslas izglītības mērķiem ir nodrošināt vizuālās mākslas valodas apguvi un attīstīt skolēnu izpratni par procesiem mūsdienu mākslā un mākslas komunikācijā. Mērķi nav iespējams sasniegt, ja mākslas izglītībā netiek iekļauts mūsdienu vizuālās mākslas gan lokālais, gan starptautiskais konteksts. Krāsas un skaņas sintēze kā metode var tikt pielietota mākslas pedagoģijā, lai veidotu izpratni par mūsdienu vizuālo mākslu, attīstītu skolēnu uztveri un domāšanu, paplašinātu vizuālo ...

  15. Development of a New Punch Head Shape to Replicate Scale-Up Issues on a Laboratory Tablet Press III: Replicating sticking phenomenon using the SAS punch and evaluation by checking the tablet surface using 3D laser scanning microscope.

    Science.gov (United States)

    Ito, Manabu; Aoki, Shigeru; Uchiyama, Jumpei; Yamato, Keisuke

    2018-04-20

    Sticking is a common observation in the scale-up stage on the punch tip using a commercial tableting machine. The difference in the total compression time between a laboratory and a commercial tableting machine is considered one of the main root causes of scale up issues in the tableting processes. The proposed Size Adjusted for Scale-up (SAS) punch can be used to adjust the consolidation and dwell times for commercial tableting machine. As a result, the sticking phenomenon is able to be replicated at the pilot scale stage. As reported in this paper, the quantification of sticking was measured using a 3D laser scanning microscope to check the tablet surface. It was shown that the sticking area decreased with the addition of magnesium stearate in the formulation, but the sticking depth was not affected by the additional amount of magnesium stearate. It is proposed that use of a 3D laser scanning microscope can be applied to evaluate sticking as a process analytical technology (PAT) tool and so sticking can be monitored continuously without stopping the machine. Copyright © 2018. Published by Elsevier Inc.

  16. effects of mixed of mixed of mixed alkaline earth oxides in potash

    African Journals Online (AJOL)

    eobe

    Si, P) are network formers, and that materials whose. Nigerian ... made by mixing sand (SiO2), potassium carbonates. (K2Co3) .... The edges of the glass were grounded using ..... surface energies of minerals; theoritical estimate for oxides ...

  17. Evolution of Seismic Velocities in Heavy Oil Sand Reservoirs during Thermal Recovery Process Évolution des vitesses sismiques dans les réservoirs de sables bitumineux au cours des procédés de récupération thermique

    Directory of Open Access Journals (Sweden)

    Nauroy J.-F.

    2013-01-01

    Full Text Available In thermally enhanced recovery processes like Cyclic Steam Stimulation (CSS or Steam Assisted Gravity Drainage (SAGD, continuous steam injection entails changes in pore fluid, pore pressure and temperature in the rock reservoir, that are most often unconsolidated or weakly consolidated sandstones. This in turn increases or decreases the effective stresses and changes the elastic properties of the rocks. Thermally enhanced recovery processes give rise to complex couplings. 4D seismic surveys are currently conducted to delineate the steam-affected areas but the interpretation is difficult. However, it is essential for optimization of reservoir development. Numerical simulations have been carried out on a case study so as to provide an estimation of the evolution of pressure, temperature, pore fluid saturation, stress and strain in any zone located around the injector and producer wells. The approach of Ciz and Shapiro (2007 (Geophysics 72, A75-A79 has been used to model the velocity dispersion in the oil sand mass under different conditions of temperature and stress. A good agreement has been found between these predictions and some laboratory velocity measurements carried out on samples of Canadian oil sand. Results appear to be useful to better interpret 4D seismic data in order to locate the steam chamber. Dans les procédés de récupération des huiles lourdes par méthodes thermiques, comme ia stimulation cyclique par vapeur (CSS ou le drainage par gravité assisté par vapeur (SAGD, l’injection de vapeur en continu entraîne des changements de liquide de pores, de pression interstitielle et de température dans la roche réservoir, qui est constituée le plus souvent de sable non consolidés ou faiblement consolidés- Ces changements à leur tour augmentent ou diminuent les contraintes effectives et modifient les propriétés élastiques des roches. Les procédés de récupération par méthodes thermiques mettent en oeuvre des couplages

  18. Compositions de revêtement réticulables par bombardement électronique. Première Partie : Caractéristiques générales du procédé Forming Crosslinkable Coatings by Electron Bombardement. Part One : General Features of the Process

    Directory of Open Access Journals (Sweden)

    Miléo J. -C.

    2006-11-01

    Full Text Available L'utilisation des accélérateurs d'électrons de moyenne énergie pour le durcissement et l'insolubilisation des peintures et vernis est décrite en analysant plus particulièrement l'aspect physico-chimique du procédé. On examine spécialement - l'action du rayonnement sur la matière; - les aspects généraux de la polymérisation radiochimique ; - l'application de la polymérisation sous radiation au séchage des vernis. On aborde ensuite rapidement les problèmes liés au choix du rayonnement et à l'influence de l'oxygène de l'air. Cet exposé se termine par la description d'un accélérateur d'électrons et d'une méthode calométrique de dosimétrie. The use of medium-power electron accelerators ta cure points and varnishes and to make them insoluble is described by making a special analysis of the physico-che-mical aspect of the process. The following points in particular are examined - the effect of radiation on matter; - general aspects of radiochemical polymerization ; - the application of radiation polymerization ta varnish drying. A quick review is then made of problems linked to the choice of radiation and to the influence of the oxygen in air. The article ends with a description of an electron accelerator and a calorimetric dosimetering method.

  19. Log-normal frailty models fitted as Poisson generalized linear mixed models.

    Science.gov (United States)

    Hirsch, Katharina; Wienke, Andreas; Kuss, Oliver

    2016-12-01

    The equivalence of a survival model with a piecewise constant baseline hazard function and a Poisson regression model has been known since decades. As shown in recent studies, this equivalence carries over to clustered survival data: A frailty model with a log-normal frailty term can be interpreted and estimated as a generalized linear mixed model with a binary response, a Poisson likelihood, and a specific offset. Proceeding this way, statistical theory and software for generalized linear mixed models are readily available for fitting frailty models. This gain in flexibility comes at the small price of (1) having to fix the number of pieces for the baseline hazard in advance and (2) having to "explode" the data set by the number of pieces. In this paper we extend the simulations of former studies by using a more realistic baseline hazard (Gompertz) and by comparing the model under consideration with competing models. Furthermore, the SAS macro %PCFrailty is introduced to apply the Poisson generalized linear mixed approach to frailty models. The simulations show good results for the shared frailty model. Our new %PCFrailty macro provides proper estimates, especially in case of 4 events per piece. The suggested Poisson generalized linear mixed approach for log-normal frailty models based on the %PCFrailty macro provides several advantages in the analysis of clustered survival data with respect to more flexible modelling of fixed and random effects, exact (in the sense of non-approximate) maximum likelihood estimation, and standard errors and different types of confidence intervals for all variance parameters. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  20. Mixed methods research in mental health nursing.

    Science.gov (United States)

    Kettles, A M; Creswell, J W; Zhang, W

    2011-08-01

    Mixed methods research is becoming more widely used in order to answer research questions and to investigate research problems in mental health and psychiatric nursing. However, two separate literature searches, one in Scotland and one in the USA, revealed that few mental health nursing studies identified mixed methods research in their titles. Many studies used the term 'embedded' but few studies identified in the literature were mixed methods embedded studies. The history, philosophical underpinnings, definition, types of mixed methods research and associated pragmatism are discussed, as well as the need for mixed methods research. Examples of mental health nursing mixed methods research are used to illustrate the different types of mixed methods: convergent parallel, embedded, explanatory and exploratory in their sequential and concurrent combinations. Implementing mixed methods research is also discussed briefly and the problem of identifying mixed methods research in mental and psychiatric nursing are discussed with some possible solutions to the problem proposed. © 2011 Blackwell Publishing.

  1. Scale Effects in Laboratory and Pilot-Plant Reactors for Trickle-Flow Processes Les conséquences de l'extrapolation appliquée aux procédés à écoulement ruisselant réalisés en laboratoire et dans les réacteurs des unités-pilotes

    Directory of Open Access Journals (Sweden)

    Sie S. T.

    2006-11-01

    carry out meaningful process research on hydrotreating processes on the scale of micro-reactors. Les études et mises au point effectuées en laboratoire sont nécessairement effectuées à plus petite échelle que les réalisations commerciales. Dans le cas de la mise au point et de la commercialisation de la technologie d'un procédé nouveau, il faudra traduire les résultats obtenus en laboratoire pour la technologie envisagée à l'échelle commerciale; le problème est donc l'extrapolation vers le haut. Cependant, bien souvent, la technologie commerciale, pour ce qui touche au type de réacteur, est plus ou moins bien définie et les études de laboratoire s'attachent à produire des données permettant de prévoir le comportement qu'auront dans ce réacteur des catalyseurs nouveaux, de matières premières de substitution, etc. Dans bien des cas, étant donné la complexité de la composition de la matière première et la cinétique de réaction, il est impossible de mener la prévision en s'appuyant sur les données cinétiques et les modèles informatiques, de sorte qu'il n'y a pas d'autre solution que la simulation du réacteur commercial à l'échelle du laboratoire; le problème est donc l'extrapolation vers le bas. Du point de vue de l'efficacité des études de recherche et développement, pour les expériences en laboratoire, l'échelle devra être aussi petite que possible sans nuire à la signification des résultats. Le présent article examine certains problèmes liés à l'extrapolation vers le bas d'un réacteur à écoulement ruisselant telle qu'elle est appliquée dans les procédés d'hydrotraitement à des réacteurs de laboratoire de tailles différentes cinétiquement équivalents. Deux aspects principaux relatifs à des inégalités de dynamique des fluides résultant de différences d'échelle sont décrits plus en détail, i. e. les écarts par rapport à un écoulement idéal donnant lieu à un effet bouchon et au mouillage ou à l

  2. HyGenSys: a Flexible Process for Hydrogen and Power Production with Reduction of CO2 Emission HyGenSys : un procédé flexible de production d’hydrogène et d’électricité avec réduction des émissions de CO2

    Directory of Open Access Journals (Sweden)

    Giroudière F.

    2010-09-01

    Full Text Available This paper presents the latest development of HyGenSys, a new sustainable process and technology for the conversion of natural gas to hydrogen and power. The concept combines a specific steam reforming reactor-exchanger with a gas turbine. The heat necessary for the steam reforming reaction comes from hot pressurized flue gases produced in a gas turbine instead of a conventional furnace. Thanks to this high level of heat integration, the overall efficiency is improved and the natural gas consumption is reduced which represents an advantage with regard to economics and CO2 emission reduction. In addition to the efficient HyGenSys process scheme itself, the technology of the reactorexchanger also offers a high level of heat integration for even more energy saving. Two main alternatives are examined in order to meet two different requirements. The first one, named HyGenSys-0, focuses on the hydrogen production for the refining and petrochemical application. The second one named HyGenSys-1, concerns the centralized power production with pre-combustion CO2capture. In that case, the produced hydrogen is fully used to fuel a power gas turbine. HyGenSys-1 has been developed and optimised in CACHET, a European Community funded project. The CACHET electrical power objective was 400 MW at the minimum. HyGenSys-0 and HyGenSys-1 are described in detail with challenges and advantages compared to existing technologies. For both alternatives, the heart of the technology is the reactor-exchanger. The reactor-exchanger design relies on an innovative arrangement of bayonet tubes that allows, at large scale, multiple heat exchanges between hot pressurized flue gas, natural gas feed and hydrogen rich stream produced. Cet article présente les développements récents d’HyGenSys, nouvel éco-procédé de conversion du gaz naturel en hydrogène et électricité. Le concept combine un réacteur-échangeur spécifique de reformage à la vapeur avec une turbine à gaz

  3. Fluid mixing in reactor containment

    International Nuclear Information System (INIS)

    Deoras M Prabhudharwadkar; Kannan N Iyer

    2005-01-01

    Full text of publication follows: Hydrogen release and distribution in nuclear power plant containment is an important safety issue. Selection of a proper turbulence model is important for accurate estimation of the mixing process. The selection of turbulence model is dictated by the best compromise between accuracy and computational efforts. For this, three different turbulence models, viz. Standard k-ε, RNG k-ε and Reynolds Stress Model, based on Reynolds averaged Navier Stokes equations (RANS) approach, were used. The computations were done using the CFD code FLUENT, which is based on the control volume methodology. The computational results were compared with the experimental results of HYMIS test facility, where helium was used to simulate hydrogen. The processes of helium plume rise, multiple plume merging, distribution and mixing were studied. Based on these computations, a simple analytical/empirical zone based model was formulated for the same problem, which predicted the helium concentration reasonably accurately and quickly. (authors)

  4. Mixed Capillary Venous Retroperitoneal Hemangioma

    Directory of Open Access Journals (Sweden)

    Mohit Godar

    2013-01-01

    Full Text Available We report a case of mixed capillary venous hemangioma of the retroperitoneum in a 61-year-old man. Abdominal ultrasonography showed a mass to be hypoechoic with increased flow in color Doppler imaging. Dynamic contrast-enhanced computed tomography revealed a centripetal filling-in of the mass, located anterior to the left psoas muscle at the level of sacroiliac joint. On the basis of imaging features, preoperative diagnosis of hemangioma was considered and the mass was excised by laparoscopic method. Immunohistochemical studies were strongly positive for CD31 and CD34, and negative for calretinin, EMA, WT1, HMB45, Ki67, synaptophysin, and lymphatic endothelial cell marker D2–40. Histologically, the neoplasm was diagnosed as mixed capillary venous hemangioma.

  5. Mixing processes in galaxy mergers

    International Nuclear Information System (INIS)

    White, S.D.M.

    1980-01-01

    Previously published simulations of mergers between galaxies are used to examine the degree to which population gradients are weakened during the coalescence of two or more stellar systems. Although substantial mixing occurs during a merger, its effect on such gradients is quite moderate and can be overwhelmed by the effect of changes in structure. Experiment suggests that the centre-to-edge population difference in a merger remnant will be 20 per cent smaller than that in its progenitor galaxies if these are identical centrally concentrated systems. A sequence of three binary mergers is thus required to reduce such differences by a factor of 2. Because of changes in radial structure, population gradients are, in general, reduced more rapidly than is suggested by these numbers. Mixing is more efficient in mergers between less concentrated systems. In real merger remnants any weakening of gradients may often be masked by star-formation in residual interstellar gas. (author)

  6. HETEROGENEOUS REBURNING BY MIXED FUELS

    Energy Technology Data Exchange (ETDEWEB)

    Wei-Yin Chen; Benson B. Gathitu

    2005-01-14

    Recent studies of heterogeneous reburning, i.e., reburning involving a coal-derived char, have elucidated its variables, kinetics and mechanisms that are valuable to the development of a highly efficient reburning process. Young lignite chars contain catalysts that not only reduce NO, but they also reduce HCN that is an important intermediate that recycles to NO in the burnout zone. Gaseous CO scavenges the surface oxides that are formed during NO reduction, regenerating the active sites on the char surface. Based on this mechanistic information, cost-effective mixed fuels containing these multiple features has been designed and tested in a simulated reburning apparatus. Remarkably high reduction of NO and HCN has been observed and it is anticipated that mixed fuel will remove 85% of NO in a three-stage reburning process.

  7. Reconfigurable Mixed Mode Universal Filter

    Directory of Open Access Journals (Sweden)

    Neelofer Afzal

    2014-01-01

    Full Text Available This paper presents a novel mixed mode universal filter configuration capable of working in voltage and transimpedance mode. The proposed single filter configuration can be reconfigured digitally to realize all the five second order filter functions (types at single output port. Other salient features of proposed configuration include independently programmable filter parameters, full cascadability, and low sensitivity figure. However, all these features are provided at the cost of quite large number of active elements. It needs three digitally programmable current feedback amplifiers and three digitally programmable current conveyors. Use of six active elements is justified by introducing three additional reduced hardware mixed mode universal filter configurations and its comparison with reported filters.

  8. Nanoscale Mixing of Soft Solids

    International Nuclear Information System (INIS)

    Choi, Soo-Hyung; Lee, Sangwoo; Soto, Haidy E.; Lodge, Timothy P.; Bates, Frank S.

    2011-01-01

    Assessing the state of mixing on the molecular scale in soft solids is challenging. Concentrated solutions of micelles formed by self-assembly of polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) diblock copolymers in squalane (C 30 H 62 ) adopt a body-centered cubic (bcc) lattice, with glassy PS cores. Utilizing small-angle neutron scattering (SANS) and isotopic labeling ( 1 H and 2 H (D) polystyrene blocks) in a contrast-matching solvent (a mixture of squalane and perdeuterated squalane), we demonstrate quantitatively the remarkable fact that a commercial mixer can create completely random mixtures of micelles with either normal, PS(H), or deuterium-labeled, PS(D), cores on a well-defined bcc lattice. The resulting SANS intensity is quantitatively modeled by the form factor of a single spherical core. These results demonstrate both the possibility of achieving complete nanoscale mixing in a soft solid and the use of SANS to quantify the randomness.

  9. Markov chains and mixing times

    CERN Document Server

    Levin, David A

    2017-01-01

    Markov Chains and Mixing Times is a magical book, managing to be both friendly and deep. It gently introduces probabilistic techniques so that an outsider can follow. At the same time, it is the first book covering the geometric theory of Markov chains and has much that will be new to experts. It is certainly THE book that I will use to teach from. I recommend it to all comers, an amazing achievement. -Persi Diaconis, Mary V. Sunseri Professor of Statistics and Mathematics, Stanford University Mixing times are an active research topic within many fields from statistical physics to the theory of algorithms, as well as having intrinsic interest within mathematical probability and exploiting discrete analogs of important geometry concepts. The first edition became an instant classic, being accessible to advanced undergraduates and yet bringing readers close to current research frontiers. This second edition adds chapters on monotone chains, the exclusion process and hitting time parameters. Having both exercises...

  10. Mixing Tamiflu with Sweet Liquids

    Centers for Disease Control (CDC) Podcasts

    2009-11-16

    If your doctor prescribes Tamiflu® capsules for your child and your child cannot swallow them, this podcast describes how to mix the contents of the capsules with a sweet thick liquid so they can be given that way.  Created: 11/16/2009 by National Center for Immunization and Respiratory Diseases (NCIRD).   Date Released: 11/16/2009.

  11. Consumer Behavior dan Marketing Mix

    OpenAIRE

    Pura A, Agus Hasan

    2005-01-01

    Marketing concept emerged since business philosophy shifted to a customer-centered, the job is to find the right products for your choosen target markets. The reason for customer orientation in which all functions work together to respond to, Serve, and satisfy customer. To satisfy consumer (end user) the marketing concept use integrated marketing, that is segmenting, Targeting, positioning, and marketing mix (4p/7p). And to.be success, marketer have to understand the behavior of consumers of...

  12. Fast mixed spectrum reactor concept

    International Nuclear Information System (INIS)

    Kouts, H.J.C.; Fischer, G.J.; Cerbone, R.J.

    1979-04-01

    The Fast Mixed Spectrum Reactor is a highly promising concept for a fast reactor with improved features of proliferation resistance, and excellent utilization of uranium resources. In technology, it can be considered to be a branch of fast breeder development, though its operation and implications are different from those of FBR'S in important respects. Successful development programs are required in several areas to bring FMSR to reality, but the payoff from a successful program can be high

  13. Material Barriers to Diffusive Mixing

    Science.gov (United States)

    Haller, George; Karrasch, Daniel

    2017-11-01

    Transport barriers, as zero-flux surfaces, are ill-defined in purely advective mixing in which the flux of any passive scalar is zero through all material surfaces. For this reason, Lagrangian Coherent Structures (LCSs) have been argued to play the role of mixing barriers as most repelling, attracting or shearing material lines. These three kinematic concepts, however, can also be defined in different ways, both within rigorous mathematical treatments and within the realm of heuristic diagnostics. This has lead to a an ever-growing number of different LCS methods, each generally identifying different objects as transport barriers. In this talk, we examine which of these methods have actual relevance for diffusive transport barriers. The latter barriers are arguably the practically relevant inhibitors in the mixing of physically relevant tracers, such as temperature, salinity, vorticity or potential vorticity. We demonstrate the role of the most effective diffusion barriers in analytical examples and observational data. Supported in part by the DFG Priority Program on Turbulent Superstructures.

  14. Marketing Mix of the Company

    OpenAIRE

    Konečná, Eva

    2012-01-01

    Tato diplomová práce se zabývá zlepšením komunikačního mixu společnosti Nitara s.r.o. Teoretická část je zaměřena na vysvětlení základních pojmů, popsán marketing, analýza konkurence, marketingový mix a nástroje komunikačního mixu. V analytické části práce se seznamujeme se společností Nitara s.r.o. a její činností. Tato část práce obsahuje analýzu marketingového prostředí společnosti a marketingový mix společnosti. V poslední části se pokusím navrhnout pro společnost nový komunikační mix, kt...

  15. Cluster Correlation in Mixed Models

    Science.gov (United States)

    Gardini, A.; Bonometto, S. A.; Murante, G.; Yepes, G.

    2000-10-01

    We evaluate the dependence of the cluster correlation length, rc, on the mean intercluster separation, Dc, for three models with critical matter density, vanishing vacuum energy (Λ=0), and COBE normalization: a tilted cold dark matter (tCDM) model (n=0.8) and two blue mixed models with two light massive neutrinos, yielding Ωh=0.26 and 0.14 (MDM1 and MDM2, respectively). All models approach the observational value of σ8 (and hence the observed cluster abundance) and are consistent with the observed abundance of damped Lyα systems. Mixed models have a motivation in recent results of neutrino physics; they also agree with the observed value of the ratio σ8/σ25, yielding the spectral slope parameter Γ, and nicely fit Las Campanas Redshift Survey (LCRS) reconstructed spectra. We use parallel AP3M simulations, performed in a wide box (of side 360 h-1 Mpc) and with high mass and distance resolution, enabling us to build artificial samples of clusters, whose total number and mass range allow us to cover the same Dc interval inspected through Automatic Plate Measuring Facility (APM) and Abell cluster clustering data. We find that the tCDM model performs substantially better than n=1 critical density CDM models. Our main finding, however, is that mixed models provide a surprisingly good fit to cluster clustering data.

  16. Lepton charges and lepton mixing

    International Nuclear Information System (INIS)

    Pontecorvo, B.

    1978-01-01

    A review is given of theoretical and experimental investigations of lepton charges and lepton mixing known to the author at the time of the Budapest Conference, July 1970. The review is more biased towards experiment than theory. The recent and relevant expermental limits on possible lepton charge non-conservation are summarized, which were obtained by measuring probabilities of various processes. The status of the lepton mixing theory in the case when the only neutral leptons are neutrinos is reviewed, the main points being the μ→eγ decay and neutrino oscillations. The ''solar neutrino puzzle'' is discussed. A model of the μ→eγ and μ→3e decays is given as an example of drastic effects of heavy lepton mixing, and the relation between processes like μ→eγ, etc., and neutrino oscillations is considered. Recent papers on lepton nonconservation effects are then classified in groups, the related literature being presented extensively, if not fully

  17. On the optimum energy mix

    International Nuclear Information System (INIS)

    Fujii, Yasumasa

    2011-01-01

    After the Fukushima accident occurred in March 2011, reform of Japan's basic energy plan and energy supply system was reported to be under discussion such as to reduce dependence on nuclear power. Planning of energy policy should be considered based on four evaluation indexes of 'economics'. 'environmental effects', 'stable supply of energy' and 'sustainability'. 'Stable supply of energy' should include stability of domestic energy supply infrastructure against natural disasters in addition to stable supply of overseas resources. 'Sustainability' meant long-term availability of resources. Since there did not exist an almighty energy source and energy supply system superior in terms of every above-mentioned evaluation index, it would be wise to use combining various energy sources and supply system in rational way. This combination lead to optimum energy mix, so-called 'Energy Best Mix'. The author evaluated characteristics of energy sources and energy supply system in terms of four indexes and showed best energy mix from short-, medium- and long-term perspectives. Since fossil fuel resources would deplete anyhow, it would be inevitable for human being to be dependent on non-fossil energy resources regardless of greenhouse effects. At present it would be difficult and no guarantee to establish society fully dependent on renewable energy, then it would be probable to need utilization of nuclear energy in the long term. (T. Tanaka)

  18. Assessing mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Berry, J.B.; Bloom, G.A.; Hart, P.W.

    1994-01-01

    The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). As discussed earlier in this conference MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. During the next 5 years, DOE will manage over 1,200,000 m 3 of MLLW and mixed transuranic (MTRU) waste at 50 sites in 22 states (see Table 1). The difference between MLLW and MTRU waste is in the concentration of elements that have a higher atomic weight than uranium. Nearly all of this waste will be located at 13 sites. More than 1400 individual mixed waste streams exist with different chemical and physical matrices containing a wide range of both hazardous and radioactive contaminants. Their containment and packaging vary widely (e.g., drums, bins, boxes, and buried waste). This heterogeneity in both packaging and waste stream constituents makes characterization difficult, which results in costly sampling and analytical procedures and increased risk to workers

  19. Mixed models approaches for joint modeling of different types of responses.

    Science.gov (United States)

    Ivanova, Anna; Molenberghs, Geert; Verbeke, Geert

    2016-01-01

    In many biomedical studies, one jointly collects longitudinal continuous, binary, and survival outcomes, possibly with some observations missing. Random-effects models, sometimes called shared-parameter models or frailty models, received a lot of attention. In such models, the corresponding variance components can be employed to capture the association between the various sequences. In some cases, random effects are considered common to various sequences, perhaps up to a scaling factor; in others, there are different but correlated random effects. Even though a variety of data types has been considered in the literature, less attention has been devoted to ordinal data. For univariate longitudinal or hierarchical data, the proportional odds mixed model (POMM) is an instance of the generalized linear mixed model (GLMM; Breslow and Clayton, 1993). Ordinal data are conveniently replaced by a parsimonious set of dummies, which in the longitudinal setting leads to a repeated set of dummies. When ordinal longitudinal data are part of a joint model, the complexity increases further. This is the setting considered in this paper. We formulate a random-effects based model that, in addition, allows for overdispersion. Using two case studies, it is shown that the combination of random effects to capture association with further correction for overdispersion can improve the model's fit considerably and that the resulting models allow to answer research questions that could not be addressed otherwise. Parameters can be estimated in a fairly straightforward way, using the SAS procedure NLMIXED.

  20. Effect of Mixing Process on Polypropylene Modified Bituminous Concrete Mix Properties

    OpenAIRE

    Noor Zainab Habib; Ibrahim Kamaruddin; Madzalan Napiah; Isa Mohd Tan

    2011-01-01

    This paper presents a research conducted to investigate the effect of mixing process on polypropylene (PP) modified bitumen mixed with well graded aggregate to form modified bituminous concrete mix. Two mode of mixing, namely dry and wet with different concentration of polymer polypropylene was used with 80/100 pen bitumen, to evaluate the bituminous concrete mix properties. Three percentages of polymer varying from 1-3% by the weight of bitumen was used in this study. Three mixes namely cont...