WorldWideScience

Sample records for sarychev peak kuril

  1. Satellite and ground observations of the June 2009 eruption of Sarychev Peak volcano, Matua Island, Central Kuriles

    Science.gov (United States)

    Rybin, A.; Chibisova, M.; Webley, P.; Steensen, T.; Izbekov, P.; Neal, C.; Realmuto, V.

    2011-01-01

    After 33 years of repose, one of the most active volcanoes of the Kurile island arc-Sarychev Peak on Matua Island in the Central Kuriles-erupted violently on June 11, 2009. The eruption lasted 9 days and stands among the largest of recent historical eruptions in the Kurile Island chain. Satellite monitoring of the eruption, using Moderate Resolution Imaging Spectroradiometer, Meteorological Agency Multifunctional Transport Satellite, and Advanced Very High Resolution Radiometer data, indicated at least 23 separate explosions between 11 and 16 June 2009. Eruptive clouds reached altitudes of generally 8-16 km above sea level (ASL) and in some cases up to 21 km asl. Clouds of volcanic ash and gas stretched to the north and northwest up to 1,500 km and to the southeast for more than 3,000 km. For the first time in recorded history, ash fall occurred on Sakhalin Island and in the northeast sector of the Khabarovsky Region, Russia. Based on satellite image analysis and reconnaissance field studies in the summer of 2009, the eruption produced explosive tephra deposits with an estimated bulk volume of 0. 4 km3. The eruption is considered to have a Volcanic Explosivity Index of 4. Because the volcano is remote, there was minimal risk to people or infrastructure on the ground. Aviation transport, however, was significantly disrupted because of the proximity of air routes to the volcano. ?? 2011 Springer-Verlag.

  2. A multi-sensor analysis of the 2009 eruption of Sarychev Peak, Kuril Islands: A case study for hazards to aviation

    Science.gov (United States)

    Williams, D.; Thomas, H. E.; Watson, M. I.

    2010-12-01

    The eruption of Sarychev Peak Volcano (48°N,153°E), Kuril Islands, occurred between June 12 and 18 2009 emplacing large volumes of sulphur dioxide and volcanic ash into the atmosphere and severely disrupting air traffic in the region. The eruption was observed by several satellite-borne sensors, including the Ozone Monitoring Instrument (OMI), the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Atmospheric Infrared Sounder (AIRS). This work uses these three sensors concurrently, as the use of several instruments provides more frequent datasets enabling improvements in accurately locating volcanic clouds and the subsequent validation of dispersion models. The North Pacific region sees a large amount of air traffic and the clouds from Sarychev Peak intersected many major air routes. Volcanic ash poses a threat to the operation of aircraft by abrading the engines which can result in failure, as well as “sand blasting” of the cockpit windows. It is also important to detect and map any sulphur dioxide clouds created, as this can also be hazardous for aircraft. Volcanic aerosol can cause corrosion on the aircraft exterior and sulphur based minerals may be deposited within the engines, blocking cooling holes over time. SO2 can also enter the aircraft cabin through the ventilation system, which can cause respiratory problems for the passengers and crew. In addition, SO2 is often associated with volcanic ash as the two species are frequently collocated. When ash retrievals are limited by high concentrations of water vapour and ice in the atmosphere, the presence of SO2 can be used to infer the location of a potential ash cloud, so that aircraft encounters may be avoided. A collection of images from the three sensors, ranging from June 10 to 24 were acquired to determine the mass and location of the SO2 cloud. This data, along with ash cloud data collected from the two MODIS sensors for dates between June 11 and 20, was then used to create a chronology of

  3. Stratospheric aerosols from the Sarychev volcano eruption in the 2009 Arctic summer

    Science.gov (United States)

    Jégou, F.; Berthet, G.; Brogniez, C.; Renard, J.-B.; François, P.; Haywood, J. M.; Jones, A.; Bourgeois, Q.; Lurton, T.; Auriol, F.; Godin-Beekmann, S.; Guimbaud, C.; Krysztofiak, G.; Gaubicher, B.; Chartier, M.; Clarisse, L.; Clerbaux, C.; Balois, J. Y.; Verwaerde, C.; Daugeron, D.

    2013-07-01

    Aerosols from the Sarychev volcano eruption (Kuril Islands, northeast of Japan) were observed in the Arctic lower stratosphere a few days after the strongest SO2 injection which occurred on 15 and 16 June 2009. From the observations provided by the Infrared Atmospheric Sounding Interferometer (IASI) an estimated 0.9 Tg of sulphur dioxide was injected into the upper troposphere and lower stratosphere (UTLS). The resultant stratospheric sulphate aerosols were detected from satellites by the Optical Spectrograph and Infrared Imaging System (OSIRIS) limb sounder and by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and from the surface by the Network for the Detection of Atmospheric Composition Changes (NDACC) lidar deployed at OHP (Observatoire de Haute-Provence, France). By the first week of July the aerosol plume had spread out over the entire Arctic region. The Sarychev-induced stratospheric aerosol over the Kiruna region (north of Sweden) was measured by the Stratospheric and Tropospheric Aerosol Counter (STAC) during eight balloon flights planned in August and September 2009. During this balloon campaign the Micro Radiomètre Ballon (MicroRADIBAL) and the Spectroscopie d'Absorption Lunaire pour l'Observation des Minoritaires Ozone et NOx (SALOMON) remote-sensing instruments also observed these aerosols. Aerosol concentrations returned to near-background levels by spring 2010. The effective radius, the surface area density (SAD), the aerosol extinction, and the total sulphur mass from STAC in situ measurements are enhanced with mean values in the range 0.15-0.21 μm, 5.5-14.7 μm2 cm-3, 5.5-29.5 × 10-4 km-1, and 4.9-12.6 × 10-10 kg[S] kg-1[air], respectively, between 14 km and 18 km. The observed and modelled e-folding time of sulphate aerosols from the Sarychev eruption is around 70-80 days, a value much shorter than the 12-14 months calculated for aerosols from the 1991 eruption of Mt Pinatubo. The OSIRIS stratospheric aerosol optical depth (AOD

  4. Stratospheric aerosols from the Sarychev volcano eruption in the 2009 Arctic summer

    Directory of Open Access Journals (Sweden)

    F. Jégou

    2013-07-01

    Full Text Available Aerosols from the Sarychev volcano eruption (Kuril Islands, northeast of Japan were observed in the Arctic lower stratosphere a few days after the strongest SO2 injection which occurred on 15 and 16 June 2009. From the observations provided by the Infrared Atmospheric Sounding Interferometer (IASI an estimated 0.9 Tg of sulphur dioxide was injected into the upper troposphere and lower stratosphere (UTLS. The resultant stratospheric sulphate aerosols were detected from satellites by the Optical Spectrograph and Infrared Imaging System (OSIRIS limb sounder and by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP and from the surface by the Network for the Detection of Atmospheric Composition Changes (NDACC lidar deployed at OHP (Observatoire de Haute-Provence, France. By the first week of July the aerosol plume had spread out over the entire Arctic region. The Sarychev-induced stratospheric aerosol over the Kiruna region (north of Sweden was measured by the Stratospheric and Tropospheric Aerosol Counter (STAC during eight balloon flights planned in August and September 2009. During this balloon campaign the Micro Radiomètre Ballon (MicroRADIBAL and the Spectroscopie d'Absorption Lunaire pour l'Observation des Minoritaires Ozone et NOx (SALOMON remote-sensing instruments also observed these aerosols. Aerosol concentrations returned to near-background levels by spring 2010. The effective radius, the surface area density (SAD, the aerosol extinction, and the total sulphur mass from STAC in situ measurements are enhanced with mean values in the range 0.15–0.21 μm, 5.5–14.7 μm2 cm−3, 5.5–29.5 × 10−4 km−1, and 4.9–12.6 × 10−10 kg[S] kg−1[air], respectively, between 14 km and 18 km. The observed and modelled e-folding time of sulphate aerosols from the Sarychev eruption is around 70–80 days, a value much shorter than the 12–14 months calculated for aerosols from the 1991 eruption of Mt Pinatubo. The OSIRIS

  5. Stratospheric aerosols from the Sarychev volcano eruption in the 2009 Arctic summer

    Directory of Open Access Journals (Sweden)

    F. Jégou

    2013-02-01

    Full Text Available Aerosols from the Sarychev volcano eruption (Kuril Islands, northeast of Japan were observed in the Arctic lower stratosphere a few days after the strongest SO2 injection which occurred on 15 and 16 June 2009. From the observations provided by the Infrared Atmospheric Sounding Interferometer (IASI an estimated 0.9 Tg of sulphur dioxide was injected into the Upper Troposphere and Lower Stratosphere (UTLS. The resultant stratospheric sulphate aerosols were detected by the Optical Spectrograph and Infrared Imaging System (OSIRIS limb sounder and by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP satellite instruments. By the first week of July the aerosol plume had spread out over the entire Arctic region. The Sarychev-induced stratospheric aerosol over the Kiruna region (north of Sweden was measured by the Stratospheric and Tropospheric Aerosol Counter (STAC during eight balloon flights planned in August and September 2009. During this balloon campaign the Micro RADIomètre BALlon (MicroRADIBAL and the Spectroscopie d'Absorption Lunaire pour l'Observation des Minoritaires Ozone et NOx (SALOMON remote-sensing instruments also observed these aerosols. Aerosol concentrations returned to near-background levels by spring 2010. The effective radius, the Surface Area Density (SAD, the aerosol extinction, and the total sulphur mass from STAC in situ measurements are enhanced with mean values in the range 0.15–0.21 μm, 5.5–14.7 μm2 cm−3, 5.5–29.5×10−4 km−1, and 4.9–12.6×10−10 kg [S] kg−1 [air], respectively, between 14 km and 18 km. The observed and modelled e-folding time of sulphate aerosols from the Sarychev eruption is around 70–80 days, a value much shorter than the 12–14 months calculated for aerosols from the 1991 eruption of Mt. Pinatubo. The OSIRIS stratospheric Aerosol Optical Depth (AOD at 750 nm is enhanced by a factor of 6 with a

  6. 1994 Shikotan, Kuril Islands, Russia Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A magnitude 8.1 earthquake occurred in the southern Kurils and on northern Hokkaido on Tuesday, October 5, 1994, (October 4 at 13:23 GMT). It was a sudden event,...

  7. Detection of volcanic sulfate aerosol with Envisat MIPAS shown for the Kasatochi, Sarychev, and Nabro eruptions

    Science.gov (United States)

    Griessbach, Sabine; Hoffmann, Lars; Spang, Reinhold; von Hobe, Marc; Müller, Rolf; Riese, Martin

    2013-04-01

    Stratospheric sulfate aerosol is known to have a strong impact on climate. Transport pathways of sulfur dioxide and sulfate aerosol to the stratosphere are still discussed. It is known that volcanic eruptions can inject significant amounts of sulfur directly into the stratosphere. Most sulfur, however, is injected into the troposphere and only a fraction of it can make its way into the stratosphere. Global and altitude resolved time series of observations are a valuable source of information for sulfur dioxide and sulfate aerosol detection. Here we present a new aerosol detection method for the infrared limb sounder Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) and the results for the Kasatochi, Sarychev, and Nabro eruptions. The new detection method utilizes three infrared window regions that are located around 830, 960, and 1224 cm-1. The combination of these three windows allows for a better detection of enhanced aerosol events in the troposphere as well as the discrimination from ice clouds. With this new method the 10 year record of MIPAS measurements was analyzed. The most remarkable sulfate aerosol events follow the Kasatochi, Sarychev, and Nabro eruptions. After these eruptions enhanced aerosol is detected in the upper troposphere and lower stratosphere (UTLS) region. Within one to two months it spreads over most of the northern hemisphere. In the tropics the aerosol reaches altitudes up to around 20 km and in the Arctic up to 15 km. The enhanced aerosol signal can be observed for about 5, 7, and up to 10 month for the Kasatochi, Sarychev, and Nabro eruptions, respectively. During this period the enhanced aerosol detections decrease in number, strength, and observation altitude. After the Nabro eruption on 13 June 2011 volcanic aerosol is detected in the UTLS region two days after the initial eruption. The following days the aerosol moves around the northern edge of the Asian monsoon region, is then transported southwards and later

  8. Shikotan, Kuril Islands Earthquake, October 4, 1994, Set 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The first slide set of Shikotan, Kuril Islands focused on damage caused by the earthquake. This second set, depicts much of the tsunami damagethat occurred. At...

  9. Shikotan, Kuril Islands Earthquake, October 4, 1994, Set 1

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A magnitude 8.1 earthquake occurred in the southern Kurils and on northern Hokkaido on Tuesday, October 5, 1994, (October 4 at 13:23 GMT). It was a sudden event,...

  10. The Kuril Islands: Russian-Japanese Relations (1920–2014

    Directory of Open Access Journals (Sweden)

    Pavel N. Biriukov

    2014-12-01

    Full Text Available The article deals with the history of Russian-Japanese relations on the Kuril Islands. A number of international documents, determining national ownerships of those islands are reviewed in the article. In particular, it analyzes the provisions of the Convention on basic principles of relations between the USSR and Japan of 1925. It denotes that the Yalta Agreement of 1945 established the territorial boundaries of Japan. From the international law perspective, which was back then effective, the provisions of the Potsdam Declaration of 1945 are considered. Potsdam Declaration (as well as the Yalta Agreement is an integral part of a unified system of political and legal decisions made by the Allied Powers. The author points out that by signing the Act of Surrender of September 2, 1945, Japan agreed on the terms of the Potsdam Declaration. The provisions of the acts of the United States and Japan are reviewed, as well as the position of their representatives in the 40-50s of last century, which showed the Japan's renunciation of claims for Kuril Islands. Comprehensive investigation exposed to provisions of the San Francisco Peace Treaty of 1951. А due attention is paid to the analysis of the Joint Soviet-Japanese Declaration of 1956. The article represents international legal arguments supporting the affiliation of Kuril Islands to the Russian Federation. The author characterizes a current state of Russian-Japanese territorial issue.

  11. The Great 2006 and 2007 Kuril Earthquakes, Forearc Segmentation and Seismic Activity of the Central Kuril Islands Region

    Science.gov (United States)

    Baranov, B. V.; Ivashchenko, A. I.; Dozorova, K. A.

    2015-12-01

    We present a structural study of the Central Kuril Islands forearc region, where the great megathrust tsunamigenic earthquake ( M w 8.3) occurred on November 15, 2006. Based on new bathymetry and seismic profiles obtained during two research cruises of R/V Akademik Lavrentiev in 2005 and 2006, ten crustal segments with along-arc length ranging from 30 to 100 km, separated by NS- and NW-trending transcurrent faults were identified within the forearc region. The transcurrent faults may serve as barriers impeding stress transfer between the neighboring segments, so that stress accumulated within separate forearc segments is usually released by earthquakes of moderate-to-strong magnitudes. However, the great November 15, 2006 earthquake ruptured seven of the crustal segments probably following a 226-year gap since the last great earthquake in 1780. The geographic extent of earthquake rupture zones, aftershock areas and earthquake clusters correlate well with forearc crustal segments identified using the geophysical data. Based on segmented structure of the Central Kuril Islands forearc region, we consider and discuss three scenarios of a great earthquake occurrence within this area. Although the margin is segmented, we suggest that a rupture could occupy the entire seismic gap with a total length of about 500 km. In such a case, the earthquake magnitude M w might exceed 8.5, and such an event might generate tsunami waves significantly exceeding in height to those produced by the great 2006-2007 Kuril earthquakes.

  12. Active Volcanoes of the Kurile Islands: A Reference Guide for Aviation Users

    Science.gov (United States)

    Neal, Christina A.; Rybin, Alexander; Chibisova, Marina; Miller, Edward

    2008-01-01

    Introduction: The many volcanoes of the remote and mostly uninhabited Kurile Island arc (fig. 1; table 1) pose a serious hazard for air traffic in the North Pacific. Ash clouds from Kurile eruptions can impact some of the busiest air travel routes in the world and drift quickly into airspace managed by three countries: Russia, Japan, and the United States. Prevailing westerly winds throughout the region will most commonly send ash from any Kurile eruption directly across the parallel North Pacific airways between North America and Asia (Kristine A. Nelson, National Weather Service, oral commun., 2006; fig. 1). This report presents maps showing locations of the 36 most active Kurile volcanoes plotted on Operational Navigational Charts published by the Defense Mapping Agency (map sheets ONC F-10, F-11, and E-10; figs. 1, 2, 3, 4). These maps are intended to assist aviation and other users in the identification of restless Kurile volcanoes. A regional map is followed by three subsections of the Kurile volcanic arc (North, Central, South). Volcanoes and selected primary geographic features are labeled. All maps contain schematic versions of the principal air routes and selected air navigational fixes in this region.

  13. Latrunculia oparinae n. sp. (Demospongiae, Poecilosclerida, Latrunculiidae) from the Kurile Islands, Sea of Okhotsk, Russia

    NARCIS (Netherlands)

    Samaai, Toufiek; Krasokhin, Vladimir

    2002-01-01

    A new species of Latrunculia with unusual properties is described from Kurile Island, Sea of Okhotsk, Russia. Although this species is structurally very similar in choanosomal architecture to all known species of Latrunculia, it differs from other Latrunculia in both the structure of the anisodiscor

  14. Rupture Process of the 1969 and 1975 Kurile Earthquakes Estimated from Tsunami Waveform Analyses

    Science.gov (United States)

    Ioki, Kei; Tanioka, Yuichiro

    2016-12-01

    The 1969 and 1975 great Kurile earthquakes occurred along the Kurile trench. Tsunamis generated by these earthquakes were observed at tide gauge stations around the coasts of the Okhotsk Sea and Pacific Ocean. To understand rupture process of the 1969 and 1975 earthquakes, slip distributions of the 1969 and 1975 events were estimated using tsunami waveform inversion technique. Seismic moments estimated from slip distributions of the 1969 and 1975 earthquakes were 1.1 × 1021 Nm ( M w 8.0) and 0.6 × 1021 Nm ( M w 7.8), respectively. The 1973 Nemuro-Oki earthquake occurred at the plate interface adjacent to that ruptured by the 1969 Kurile earthquake. The 1975 Shikotan earthquake occurred in a shallow region of the plate interface where was not ruptured by the 1969 Kurile earthquake. Further, like a sequence of the 1969 and 1975 earthquakes, it is possible that a great earthquake may occur in a shallow part of the plate interface a few years after a great earthquake that occurs in a deeper part of the same region along the trench.

  15. Tsunami waveform analyses of the 2006 underthrust and 2007 outer-rise Kurile earthquakes

    Directory of Open Access Journals (Sweden)

    Y. Tanioka

    2008-01-01

    Full Text Available The 2006 large interplate Kurile earthquake proved that the entire plate interface of the Kurile-Kamchatka subduction zone was strongly coupled from Hokkaido, Japan, to Kamchatka, Russia. The seismic moment of the 2006 Kurile earthquake estimated from ten tsunami waveforms is 3.1×1021 Nm (Mw=8.3. This estimate is consistent with the seismic moment estimated from the seismological data in the Global CMT catalog. The computed tsunami propagation indicates that scattering of the tsunami waves occurred at the shallow region near the Emperor Ridge. The computed tsunami propagation also indicates that large later tsunami waves observed at Crescent City is caused by the shallow region along the Mendocino Fracture Zone. The seismic moment of the 2007 outer-rise Kurile earthquake estimated from tsunami waveforms is 1.0×1021 Nm (Mw=8.0. This estimate is also consistent with the seismic moment in the Global CMT catalog.

  16. Epimeria abyssalis sp. n. from the Kuril-Kamchatka Trench (Crustacea, Amphipoda, Epimeriidae)

    Science.gov (United States)

    Shimomura, Michitaka; Tomikawa, Ko

    2016-01-01

    Abstract A new deep-sea epimeriid, Epimeria abyssalis is described from the Kuril-Kamchatka Trench, in the northwestern Pacific. This species differs from its congeners in having a short rostrum and a telson with deep and narrow Y-shaped excavation. Epimeria abyssalis is the deepest recorded Epimeria species. A key to the north Pacific species of Epimeria is provided. PMID:28174500

  17. 2003 Eruption of Chikurachki Volcano, Paramushir Island, Northern Kuriles, Russia

    Science.gov (United States)

    Schneider, D. J.; Girina, O. A.; Neal, C. A.; Kotenko, L.; Terentiev, N. S.; Izbekov, P.; Belousov, I.; Senyukov, S.; Ovsyannikov, A. A.

    2003-12-01

    Chikurachki Volcano in the northern Kurile Islands erupted for the second time in two years in mid-April 2003. Although the Kamchatka Volcanic Eruptions Response Team (KVERT) received word of a possible eruption from residents of Paramushir Island on April 17, poor weather precluded confirmation of volcanic activity, and the exact start date is uncertain. On April 18, during routine satellite image analysis, the Alaska Volcano Observatory (AVO) detected an ash cloud from Chikurachki in GMS data and immediately notified the Federal Aviation Administration (FAA), National Weather Service, and other agencies. Subsequent formal alerts were issued through aviation and meteorological channels as outlined in the Alaska Interagency Operating Plan for Volcanic Ash Episodes. Thermal infrared imagery and trajectory models suggested the initial cloud was relatively low-level (below 25,000 ft ASL), however this height was not well constrained. Over the next several months, activity at Chikurachki consisted largely of strombolian bursts producing intermittent ash clouds reaching heights of generally less than 10-13,000 ft. ASL. Ash fall was noted as far as 60 km downwind. The last confirmed eruptive activity was June 16, 2003. During the eruption, AVHRR, MODIS, and GMS satellites captured images of the ash cloud as far as 300 km generally east and southeast of the volcano in the region heavily traveled North Pacific air routes. The propagation of volcanic clouds was monitored using visual and infrared channels and included a routine split-window analysis. Weak thermal anomalies were detected in AVHRR images suggesting minimal effusive activity near the central vent. Over the course of the eruption, aviation and meteorological authorities in Russia, the U.S., and Japan issued official notices regarding the eruption and the position and estimated height of the ash plume. Impacts to aviation were minor due to the low-level and intermittent nature of the eruption. Chikurachki is a

  18. Hydrochemical fluxes from Baransky volcano, Iturup, Kuril Islands

    Science.gov (United States)

    Chelnokov, George; Zharkov, Rafael; Bragin, Ivan; Kharitonova, Natalia

    2014-05-01

    The Sernaya River and its tributary the Kipyashaya River are the only rivers that drain all thermal waters coming down the Baransky volcano (Iturup, the Kuril Islands). Hydrological parameters and a chemical composition relating to these rivers and all inflow streams coming from the volcano were measured from August to October 2013. The main aims of this investigation were to develop a data baseline for the catchment of the Sernaya River in order to monitor the Baransky volcano, to estimate total discharge of solute elements and finally to identify thermal groundwater inflow. Since the Kipyashaya River and the Sernaya River receive all water streams coming along the south-west and south flanks of the Baransky volcano within approximately 10 kilometers we can suggest that the whole thermal discharge runs into the Kipyashaya River. Thus a frequent sampling of the rivers presents the best way to monitor the volcano as they comprise a mix of all thermal waters from the Baransky volcano. The Sernaia River, at the end of its course along the flanks of the Baransky volcano, has a total flux of 12 m³/s ± 1%. Multiplication of the discharge by the concentration in main ions of the river at this point yields an aggregate flux of ~130 tons/day ± 10%. This flux performs the dissolution flux as a result of rocks dissolution beneath the active crater and in the aquifer of the Kipyashaya River. Cl total discharge was estimated at ~33 tons/day ± 10%, SO4 ~67 tons/day ± 10%, and total cation discharge ~28 tons/day ± 10%. The Kipyashaya River brings in to the Sernaya River 15 tons/day ± 10% of Cl, ~30 tons/day ± 10% of SO4, and ~3,5 tons/day ± 10% cations average. Several thermal springs with low water discharge are located on the right waterside of the Sernaya River 100 m up and down from the Kipyashaya River influx. These thermal springs with Cl discharge ~ 5g/s have significant concentrations of Ca due to water-rock interaction with basement rocks. The way of sampling

  19. Mantle flow and deformation of subducting slab at the junction of Tohoku-Kurile arc

    Science.gov (United States)

    Morishige, M.; Honda, S.

    2012-12-01

    Geophysical studies of the plate junction reveal possible evidence of the presence of 3D mantle flow and deformation of subducting slabs. The junction of the Tohoku-Kurile is one of the best studied junctions in the world. The Pacific plate subducts under the North American plate in a direction almost perpendicular to Japan trench, while it subducts obliquely along the Kurile arc. Analysis of seismic anisotropy in this region shows the trench-normal fast polarization direction of S-wave splitting in the back arc even where the oblique subduction occurs. The angle of subduction varies along the strike of the trench, that is, it is smallest near the plate junction and becomes large beneath Kurile arc. There is also an important distinction in the slab behavior. The slab beneath Tohoku stagnates in the transition zone, whereas the slab beneath the Kurile arc penetrates into the lower mantle. In this presentation, we show the dynamic effects of the junction using a numerical model of mantle convection with a realistic curved shape of the trench in spherical geometry. The model is set so that it becomes similar to the geometry of the surface plate boundary in the Tohoku-Kurile arc. In order to enable one-sided subduction, the velocities are imposed both on the surface and in the small 3D boundary region around the trench. We obtain 3D flow in the mantle wedge which is consistent with the observation of seismic anisotropy including the oblique subduction zone. The flow and hence the fast polarization direction in the subslab mantle is almost 2D. We also find that the angle of subduction varies along-strike, which agrees with the observations. This variation can be explained by a torque balance acting on subducting slabs in the case of oblique subduction. This along-arc variation of the angle of subduction partly contributes to the different behavior of slab stagnation in the Tohoku-Kurile arc. Our results show that the shape of the trench is an important factor which

  20. Geographic Distribution of Ammonia-Oxidizing Archaea along the Kuril Islands in the Western Subarctic Pacific

    Directory of Open Access Journals (Sweden)

    Hongmei Jing

    2017-06-01

    Full Text Available Community composition and abundance of ammonia-oxidizing archaea (AOA in the ocean were affected by different physicochemical conditions, but their responses to physical barriers (such as a chain of islands were largely unknown. In our study, geographic distribution of the AOA from the surface photic zone to the deep bathypelagic waters in the western subarctic Pacific adjacent to the Kuril Islands was investigated using pyrosequencing based on the ammonia monooxygenase subunit A (amoA gene. Genotypes of clusters A and B dominated in the upper euphotic zone and the deep waters, respectively. Quantitative PCR assays revealed that the occurrence and ammonia-oxidizing activity of ammonia-oxidizing archaea (AOA reached their maxima at the depth of 200 m, where a higher diversity and abundance of actively transcribed AOA was observed at the station located in the marginal sea exposed to more terrestrial input. Similar community composition of AOA observed at the two stations adjacent to the Kuril Islands maybe due to water exchange across the Bussol Strait. They distinct from the station located in the western subarctic gyre, where sub-cluster WCAII had a specific distribution in the surface water, and this sub-cluster seemed having a confined distribution in the western Pacific. Habitat-specific groupings of different WCB sub-clusters were observed reflecting the isolated microevolution existed in cluster WCB. The effect of the Kuril Islands on the phylogenetic composition of AOA between the Sea of Okhotsk and the western subarctic Pacific is not obvious, possibly because our sampling stations are near to the Bussol Strait, the main gateway through which water is exchanged between the Sea of Okhotsk and the Pacific. The vertical and horizontal distribution patterns of AOA communities among stations along the Kuril Islands were essentially determined by the in situ prevailing physicochemical gradients along the two dimensions.

  1. Plastic pollution of the Kuril-Kamchatka Trench area (NW pacific)

    Science.gov (United States)

    Fischer, Viola; Elsner, Nikolaus O.; Brenke, Nils; Schwabe, Enrico; Brandt, Angelika

    2015-01-01

    During the German-Russian expedition KuramBio (Kuril-Kamchatka Biodiversity Studies) to the northwest Pacific Kuril-Kamchatka Trench and its adjacent abyssal plain, we found several kinds and sizes of plastic debris ranging from fishing nets and packaging to microplastic in the sediment of the deep-sea floor. Microplastics were ubiquitous in the smaller fractions of the box corer samples from every station from depths between 4869 and 5766 m. They were found on the abyssal plain and in the sediments of the trench slope on both sides. The amount of microplastics differed between the stations, with lowest concentration of 60 pieces per m2 and highest concentrations of more than 2000 pieces per m2. Around 75% of the microplastics (defined here as particles marine fauna (Zenkevich, 1963). Yet we can only guess how these microplastics accumulated in the deep sea of the Kuril-Kamchatka Trench area and what consequences the microplastic itself and its adsorbed chemicals will have on this very special and rich deep-sea fauna. But we herewith present an evaluation of the different kinds of plastic debris we found, as a documentation of human impact into the deep sea of this region of the Northwest Pacific.

  2. Modeling of influence from remote tsunami at the coast of Sakhalin and Kuriles islands.

    Science.gov (United States)

    Zaytsev, Andrey; Pelinovsky, Efim; Yalciner, Ahmet; Chernov, Anton; Kostenko, Irina

    2010-05-01

    The Far East coast of Russia (Kuriles islands, Sakhalin, Kamchatka) is the area where the dangerous natural phenomena as tsunami is located. A lot of works are established for decreasing of tsunami's influence. Tsunami mapping and mitigation strategy are given for some regions. The centers of Tsunami Warning System are opened, enough plenty of records of a tsunami are collected. The properties of local tsunami are studied well. At the same time, the catastrophic event of the Indonesian tsunami, which had happened in December, 2004, when the sufficient waves have reached the coasts of Africa and South America, it is necessary to note, that the coats, which was far from the epicenter of earthquakes can be effected by catastrophic influence. Moreover, it is practically unique case, when using Tsunami Warning System can reduce the number of human victims to zero. Development of the computer technologies, numerical methods for the solution of systems of the nonlinear differential equations makes computer modeling real and hypothetical tsunamis is the basic method of studying features of distribution of waves in water areas and their influence at coast. Numerical modeling of distribution of historical tsunami from the seismic sources in the Pacific Ocean was observed. The events with an epicenter, remote from Far East coast of Russia were considered. The estimation of the remote tsunami waves propagation was developed. Impact force of tsunamis was estimated. The features of passage of tsunami through Kuril Straits were considered. The spectral analysis of records in settlements of Sakhalin and Kuriles is lead. NAMI-DANCE program was used for tsunami propagation numerical modeling. It is used finite element numerical schemes for Shallow Water Equations and Nonlinear-Dispersive Equations, with use Nested Grid.

  3. Controlling for Landform Age When Determining the Settlement History of the Kuril Islands.

    Science.gov (United States)

    MacInnes, Breanyn; Fitzhugh, Ben; Holman, Darryl

    2014-01-01

    Archaeological investigations of settlement patterns in dynamic landscapes can be strongly biased by the evolution of the Earth's surface. The Kuril Island volcanic arc exemplifies such a dynamic landscape, where landscape-modifying geological forces were active during settlement, including sea-level changes, tectonic emergence, volcanic eruptive processes, coastal aggradation, and dune formation. With all these ongoing processes, in this paper we seek to understand how new landscape formation in the Holocene might bias archaeological interpretations of human settlement in the Kurils. Resolving this issue is fundamental to any interpretation of human settlement history derived from the distribution and age of archaeological sites from the region. On the basis of a comparison of landform ages and earliest archaeological occupation ages on those landforms, we conclude that landform creation did not significantly bias our aggregate archaeological evidence for earliest settlement. Some sections of the archipelago have larger proportions of landform creation dates closer to archaeological evidence of settlement and undoubtedly some archaeological sites have been lost to geomorphic processes. However, comparisons between regions reveal comparable archaeological establishment patterns irrespective of geomorphic antiquity.

  4. Tsunami Runup in the Middle Kuril Islands from the Great Earthquake of 15 Nov 2006

    Science.gov (United States)

    Bourgeois, J.; Pinegina, T.; Razhegaeva, N.; Kaistrenko, V.; Levin, B.; Macinnes, B.; Kravchunovskaya, E.

    2007-12-01

    Two expeditions to the middle Kuril Islands [IMGG FED RAS, NSF Kurils Biocomplexity Project] in the summer of 2007 yielded tsunami runup and inundation measurements from the 15 Nov 2006 Mw 8.3 subduction-zone earthquake, and possibly from the 13 Jan 2007 Mw 8.1 earthquake seaward of the subduction zone. Both earthquakes produced measurable tsunamis in the far field, the 13 Jan tsunami significantly smaller; the 15 Nov tsunami did some damage in the harbor of Crescent City, CA. Ours are the first near-source measurements because no one lives in the middle Kurils. Moreover, because KBP visited many of the same sites in summer of 2006, we have numerous before-and-after comparisons, including quantified erosion. We measured 120 profiles and made more than 300 runup measurements. We found dramatic tsunami effects of erosion and deposition, with widespread runup of 8-12 m, up to about 20 m, between and including Simushir and Matua islands. In most cases, we measured runup with a transit and surveying rod, producing a topographic profile from sea level to the slope above runup indicators; in some cases, we used a hand level and tape. Runup/inundation criteria were generally subhorizontal lines of floatable debris, typically wood, plastic, glass floats, and styrofoam. Single occurrences, e.g., of a plastic bottle were not considered adequate. Corroborative evidence, not used independently, included limits of consistently oriented stems of tall grasses and flowers, limit of sand and gravel deposits above turf and dead vegetation, and elevation of fresh erosion of turf from slopes landward of the beach plain. Currently we are compiling, correcting and vetting our measurements, which will be submitted to online databases. Topographic profiles obviously had an effect on the data, with short, steep profiles generating high runup and short inundation; most beach-ridge profiles had longer inundation and shorter runup. However, at Ainu Bay on Matua Island, we found as much as 18

  5. Genetic structure of the Salvelinus genus chars from reservoirs of the Kuril Islands.

    Science.gov (United States)

    Shubina, E A; Ponomareva, E V; Gritsenko, O F

    2007-12-01

    Genetic resemblance of chars Salvelinus alpinus krasheninnikovi (Salvelinus malma krasheninnikovi) of 35 samples collected in five Kuril Islands--Shumshu, Paramushir, Onekotan, Iturup, and Kunashir--has been studied by the PCR-RAPD method. In the limits of each island, both resident isolates and anadromous forms give strictly supported clusters distinct from samples from the other islands. The samples from five islands form three superclusters: the first from Kunashir and Iturup Islands, the second from Paramushir and Onekotan Islands, and the third from Shumshu Island. The possible reasons for genetic similarity of resident and anadromous forms of Dolly Varden chars inhabiting reservoirs of a definite island are considered (the founder effect, homing, limited migration).

  6. [Allozyme diversity and genetic divergence of the dolly varden Salvelinus malma Walbaum from the Kuril islands].

    Science.gov (United States)

    Omel'chenko, V T; Salmenkova, E A; Shed'ko, S V

    2002-09-01

    Genetic variation was studied in the southern subspecies of the Asian Dolly Varden Salvelinus malma krascheninnikovi from the Kuril Islands. Thirty-six genetic loci controlling 19 enzyme systems were analyzed in 13 Dolly Varden populations from the Shumshu, Paramushir, Onekotan, Rasshua, Simushir, Urup, Iturup, and Kunashir islands. In the studied populations, the proportion of polymorphic loci was 35 to 85% and the mean heterozygosity was 0.104 to 0.173; populations from the Kunashir Island were characterized by maximum heterozygosity. In the island populations examined, significant inter-population heterogeneity of allele frequencies was found for all studied population pairs. For the total population of all islands, the inter-population diversity (GST = 0.188) was comparable to this parameter for the total population from the Kunashir Island (GST = 0.170). Genetic distances between populations did not correlate with the corresponding geographical distances, which indicates the lack of a pronounced gene exchange between the island populations. Cluster analysis and multidimensional scaling based on genetic distances did not reveal clear groups among the studied populations but indicated greater similarity within the Iturup-Simushir-Urup-Paramushir group and a greater genetic divergence of the Kunashir, Onekotan, Rasshua, and especially Shumshu populations. In the Shumshu population, allele frequencies indicate the admixture of genes of the northern Dolly Varden. The observed pattern of genetic differentiation was probably caused largely by genetic drift under the conditions of a limited gene flow because of homing (which is typical of the Dolly Varden) and the presence of isolated nonanadromous populations. The population-genetic analysis of the Dolly Varden from the Kuril Islands does not give grounds to distinguish any other isolated Dolly Varden species in this region than S. malma, which is represented by the southern form S. m. krascheninnikovi with an

  7. New insights into the abyssal sponge fauna of the Kurile-Kamchatka plain and Trench region (Northwest Pacific)

    Science.gov (United States)

    Downey, Rachel V.; Janussen, Dorte

    2015-01-01

    The under-explored abyssal depths of the Kurile-Kamchatka region have been re-examined during the KuramBio (Kurile-Kamchatka Biodiversity Study) expedition. Combining new KuramBio data with previous expedition data in this region has enhanced our understanding abyssal sponge fauna, in particular, the patchiness, rarity, and exceptional richness of the Cladorhizidae family. In total, 14 sponge species, from 7 genera, in 5 families, within two classes (Demospongiae and Hexactinellida) were collected. Of the 14 species, 29% (4 spp.) have been found previously in this region, 36% (5 spp.) were new to the regional abyssal fauna, and 21% (3 spp.) were new to science. The number of abyssal species in this region has now been increased by 26% (8 spp.) and genera by nearly 15% (2 genera). Rarity is a prominent feature of this abyssal fauna, with more than half of species only found at one station, and 83% (19 spp.) of species found previously in this region were not re-found during KuramBio. Cladorhizid sponges dominate demosponge species and genera richness in the abyssal Kurile-Kamchatka region; accounting for 87% (20 spp.) of all demosponge species, and accounting for over 60% (5 genera) of all demosponge genera. Sponge richness in this region is potentially aided by the productivity of the ocean waters, the geological age of the Pacific Ocean, low population densities, and the varied topographic features (ridges, trenches, and seamounts) found in this region. Unusually, the dominance of demosponges in the Kurile-Kamchatka sponge faunal composition is not replicated in other well-sampled abyssal regions, which tend to be richer in deep-sea hexactinellid fauna. Broad depth, latitudinal and longitudinal ranges in Kurile-Kamchatka abyssal fauna are a key characteristic of this faunal assemblage. Strong abyssal faunal connectivity is found between the Kurile-Kamchatka region and North Pacific abyssal fauna, with weaker faunal connections found with the adjacent semi

  8. Earthquake Recurrence along the Kuril Trench: A New View from Paleoseismology

    Science.gov (United States)

    Satake, K.; Nanayama, F.

    2003-12-01

    Paleoseismological data along the Pacific coast of eastern Hokkaido indicate that unusual earthquakes have repeated at about 500 year interval with the most recent event in the 17th century. Along the Kuril trench, interplate earthquakes with rupture length of 100-200 km occurred in 1952 (Mw 8.1) and 1973 (Mw 7.8), as well as 1843 (M 8.0) and 1894 (M 7.9), which have been considered characteristics of this subduction zone. We review paleoseismological data, examine coastal deformation and tsunami inundation from fault models, and propose a model of earthquake recurrence in the Kuril subduction zone. Pleistocene marine terraces on the Pacific coast show slight net uplift, at an average of 0.1-0.4 mm/yr in the past several hundred thousand years, whereas tide-gauge data show gradual subsidence of 8-9 mm/yr since 1900. Infrequent unusual event (Armageddon) has been inferred (Ikeda, 1996) to resolve this conflict. Holocene stratigraphic and microfossil studies have indicated sea-level changes in the last 3 ka (e.g., Sawai, 2001). Each event is marked by an abrupt upward change from brackish bay deposits to freshwater peat. The youngest change has been dated in the 17th century with an estimated uplift amount of 0.5-1m (Atwater et al., 2003). Such evidence has been found along the 100 km long coast and recurred up to seven times in the last 2.5 ka (Kelsey et al., 2002). Extensive tsunami deposits indicate large prehistoric tsunamis (Nanayama et al., 2003). At Kiritappu, for instance, sand sheets extend 3 km inland, much further than historic tsunamis. Ten sheets of tsunami deposits indicate recurrence of such unusual tsunami with an average recurrence interval of about 500 years. The most recent event occurred in the 17th century. Historic documents in Honshu rules out unusual tsunamis that would cause damage along the Sanriku coast. Tsunami damage from the 1611 and 1677 earthquakes, both along the Japan trench, have been documented along the Sanriku coast. We modeled

  9. Geochemistry and solute fluxes from volcano-hydrothermal system of Ketoy, Kuril Island arc

    Science.gov (United States)

    Kalacheva, Elena; Taran, Yuri; Voloshina, Ekaterina; Tarasov, Kirill; Kotenko, Tatiana

    2017-04-01

    Ketoy is a volcanic island in the middle of the Kuril Island arc. With an area of ˜70 km2 it consists of two volcanic structures of different ages. The younger Pallas cone (960 m asl) is characterized by a strong fumarolic activity with maximum temperature of 720˚ C (August 2016) and hosts a cold acid crater lake in the summit crater. The older Ketoy cone (1172 m) at the NE of the island is cut by the erosion crater that open to the east and known as a canyon of Gorchichny Stream. There is a strong hydrothermal activity within the canyon with boiling springs and steam vents. We present our data obtained during the fieldwork in August 2016 on the chemical (major and trace elements including REE) and isotopic (H, O, C, S) composition of thermal fluids from both Gorchichny canyon and thermal fields on the slopes of the Pallas cone. Thermal field of the Gorchichny Stream discharges acid Ca-SO4 and near neutral unusual, Cl-poor, Na-Ca-SO4 hot-to-boiling waters with TDS 2-3 g/L. Thermal field of the summit plateau at the base of the Pallas cone discharges acid Ca-SO4 warm water that can be the seepage from the crater lake. Isotopic compositions of thermal waters are close to the meteoric water line but with a clear positive shift in both δ18O and δD with a trend directed to the isotopic composition of condensates of fumarolic gases of the Pallas cone. For the first time the outflow rates of the draining streams have been measured and hydrothermal solute fluxes from the volcano-hydrothermal system have been estimated. The total hydrothermal flux of chloride and sulfate from Ketoy Island is estimated as 8.5 t/d of Cl and 30 t/d of SO4. This work was supported by the RSF grant #15-17-20011.

  10. ANALYSIS OF REGULARITIES IN DISTRIBUTION OF EARTHQUAKES BY FOCAL DISPLACEMENT IN THE KURIL-OKHOTSK REGION BEFORE THE CATASTROPHIC SIMUSHIR EARTHQUAKE OF 15 NOVEMBER 2006

    Directory of Open Access Journals (Sweden)

    Timofei K. Zlobin

    2015-09-01

    Full Text Available The catastrophic Simushir earthquake occurred on 15 November 2006 in the Kuril-Okhotsk region in the Middle Kuril Islands which is a transition zone between the Eurasian continent and the Pacific Ocean. It was followed by numerous strong earthquakes. It is established that the catastrophic earthquake was prepared on a site characterized by increased relative effective pressures which is located at the border of the low-pressure area (Figure 1.Based on data from GlobalCMT (Harvard, earthquake focal mechanisms were reconstructed, and tectonic stresses, the seismotectonic setting and the earthquakes distribution pattern were studied for analysis of the field of stresses in the region before to the Simushir earthquake (Figures 2 and 3; Table 1.Five areas of various types of movement were determined. Three of them are stretched along the Kuril Islands. It is established that seismodislocations in earthquake focal areas are regularly distributed. In each of the determined areas, displacements of a specific type (shear or reverse shear are concentrated and give evidence of the alteration and change of zones characterized by horizontal stretching and compression.The presence of the horizontal stretching and compression zones can be explained by a model of subduction (Figure 4. Detailed studies of the state of stresses of the Kuril region confirm such zones (Figure 5. Recent GeodynamicsThe established specific features of tectonic stresses before the catastrophic Simushir earthquake of 15 November 2006 contribute to studies of earthquake forecasting problems. The state of stresses and the geodynamic conditions suggesting occurrence of new earthquakes can be assessed from the data on the distribution of horizontal compression, stretching and shear areas of the Earth’s crust and the upper mantle in the Kuril region.

  11. Kamchatka and North Kurile Volcano Explosive Eruptions in 2015 and Danger to Aviation

    Science.gov (United States)

    Girina, Olga; Melnikov, Dmitry; Manevich, Alexander; Demyanchuk, Yury; Nuzhdaev, Anton; Petrova, Elena

    2016-04-01

    There are 36 active volcanoes in the Kamchatka and North Kurile, and several of them are continuously active. In 2015, four of the Kamchatkan volcanoes (Sheveluch, Klyuchevskoy, Karymsky and Zhupanovsky) and two volcanoes of North Kurile (Alaid and Chikurachki) had strong and moderate explosive eruptions. Moderate gas-steam activity was observing of Bezymianny, Kizimen, Avachinsky, Koryaksky, Gorely, Mutnovsky and other volcanoes. Strong explosive eruptions of volcanoes are the most dangerous for aircraft because they can produce in a few hours or days to the atmosphere and the stratosphere till several cubic kilometers of volcanic ash and aerosols. Ash plumes and the clouds, depending on the power of the eruption, the strength and wind speed, can travel thousands of kilometers from the volcano for several days, remaining hazardous to aircraft, as the melting temperature of small particles of ash below the operating temperature of jet engines. The eruptive activity of Sheveluch volcano began since 1980 (growth of the lava dome) and is continuing at present. Strong explosive events of the volcano occurred in 2015: on 07, 12, and 15 January, 01, 17, and 28 February, 04, 08, 16, 21-22, and 26 March, 07 and 12 April: ash plumes rose up to 7-12 km a.s.l. and extended more 900 km to the different directions of the volcano. Ashfalls occurred at Ust'-Kamchatsk on 16 March, and Klyuchi on 30 October. Strong and moderate hot avalanches from the lava dome were observing more often in the second half of the year. Aviation color code of Sheveluch was Orange during the year. Activity of the volcano was dangerous to international and local aviation. Explosive-effusive eruption of Klyuchevskoy volcano lasted from 01 January till 24 March. Strombolian explosive volcanic activity began from 01 January, and on 08-09 January a lava flow was detected at the Apakhonchich chute on the southeastern flank of the volcano. Vulcanian activity of the volcano began from 10 January. Ashfalls

  12. Near-source observations and modeling of the Kuril Islands tsunamis of 15 November 2006 and 13 January 2007

    Directory of Open Access Journals (Sweden)

    A. B. Rabinovich

    2008-01-01

    Full Text Available Two major earthquakes near the Central Kuril Islands (Mw=8.3 on 15 November 2006 and Mw=8.1 on 13 January 2007 generated trans-oceanic tsunamis recorded over the entire Pacific Ocean. The strongest oscillations, exceeding several meters, occurred near the source region of the Kuril Islands. Tide gauge records for both tsunamis have been thoroughly examined and numerical models of the events have been constructed. The models of the 2006 and 2007 events include two important advancements in the simulation of seismically generated tsunamis: (a the use of the finite failure source models by Ji (2006, 2007 which provide more detailed information than conventional models on spatial displacements in the source areas and which avoid uncertainties in source extent; and (b the use of the three-dimensional Laplace equation to reconstruct the initial tsunami sea surface elevation (avoiding the usual shallow-water approximation. The close agreement of our simulated results with the observed tsunami waveforms at the open-ocean DART stations support the validity of this approach. Observational and model findings reveal that energy fluxes of the tsunami waves from the source areas were mainly directed southeastward toward the Hawaiian Islands, with relatively little energy propagation into the Sea of Okhotsk. A marked feature of both tsunamis was their high-frequency content, with typical wave periods ranging from 2–3 to 15–20 min. Despite certain similarities, the two tsunamis were essentially different and had opposite polarity: the leading wave of the November 2006 trans-oceanic tsunami was positive, while that for the January 2007 trans-oceanic tsunami was negative. Numerical modeling of both tsunamis indicates that, due to differences in their seismic source properties, the 2006 tsunami was more wide-spread but less focused than the 2007 tsunami.

  13. Observation and modelling of turbulent mixing in the Kuril and Aleutian Straits and impact of its 18.6-year period tidal cycle on ocean and climate

    Science.gov (United States)

    Yasuda, I.; Tanaka, Y.; Itoh, S.; Hasumi, H.; Komatsu, K.; Osafune, S.; Yagi, M.; Tanaka, T.; Kaneko, H.; Ikeya, T.; Konda, S.; Nishioka, J.; Nakatsuka, T.; Katsumata, K.; Tatebe, H.; Watanabe, Y.; Hiroe, Y.; Nakamura, T.

    2012-12-01

    Direct turbulent observations in the Kuril Straits and Aleutian Straits reveal that tide-induced strong vertical mixing corresponds to strong shear of combined diurnal tidal and/or mean currents and significantly modifies the water-mass and potential vorticity distribution. Bi-decadal variability synchronized with 18.6-year period moon-tidal cycle were found in various parts of the ocean and climate indices: water-mass variability in the subarctic North Pacific, especially near the strong diurnal tide regions as Kuril Straits and Aleutian Islands, and in long-term climate indices as Pacific Decadal Oscillation (PDO) and El-Nino and Southern Oscillation (ENSO) in proxy-reconstructed records. In low-frequency part of the PDO and SOI records, negative (positive)-PDO and positive (negative)-SOI tend to occur in the 4-6-th (10-12-th) year after the maximum diurnal tide, which is consistent with the climate model experiments with locally enhanced vertical mixing around Kuril Straits showing that tidal mixing and its variability could generate bi-decadal variability in ocean and climate. Ocean and climate model experiments with parameterized tidal mixing explain some of the water-mass modifications and bi-decadal variability of water-masses and climate.

  14. CO-SEISMIC GRAVITY GRADIENT CHANGES OF THE 2006–2007 GREAT EARTHQUAKES IN THE CENTRAL KURIL ISLANDS FROM GRACE OBSERVATIONS

    Directory of Open Access Journals (Sweden)

    A. Rahimi

    2017-09-01

    Full Text Available GRACE satellites (the Gravity Recovery And climate Experiment are very useful sensors to extract gravity anomalies after earthquakes. In this study, we reveal co-seismic signals of the two combined earthquakes, the 2006 Mw8.3 thrust and 2007 Mw8.1 normal fault earthquakes of the central Kuril Islands from GRACE observations. We compute monthly full gravitational gradient tensor in the local north-east-down frame for Kuril Islands earthquakes without spatial averaging and de-striping filters. Some of gravitational gradient components (e.g. ΔVxx, ΔVxz enhance high frequency components of the earth gravity field and reveal more details in spatial and temporal domain. Therefore, co-seismic activity can be better illustrated. For the first time, we show that the positive-negative-positive co-seismic ΔVxx due to the Kuril Islands earthquakes ranges from − 0.13 to + 0.11 milli Eötvös, and ΔVxz shows a positive-negative-positive pattern ranges from − 0.16 to + 0.13 milli Eötvös, agree well with seismic model predictions.

  15. PeakWorks

    Energy Technology Data Exchange (ETDEWEB)

    2016-11-30

    The PeakWorks software is designed to assist in the quantitative analysis of atom probe tomography (APT) generated mass spectra. Specifically, through an interactive user interface, mass peaks can be identified automatically (defined by a threshold) and/or identified manually. The software then provides a means to assign specific elemental isotopes (including more than one) to each peak. The software also provides a means for the user to choose background subtraction of each peak based on background fitting functions, the choice of which is left to the users discretion. Peak ranging (the mass range over which peaks are integrated) is also automated allowing the user to chose a quantitative range (e.g. full-widthhalf- maximum). The software then integrates all identified peaks, providing a background-subtracted composition, which also includes the deconvolution of peaks (i.e. those peaks that happen to have overlapping isotopic masses). The software is also able to output a 'range file' that can be used in other software packages, such as within IVAS. A range file lists the peak identities, the mass range of each identified peak, and a color code for the peak. The software is also able to generate 'dummy' peak ranges within an outputted range file that can be used within IVAS to provide a means for background subtracted proximity histogram analysis.

  16. Paniek over Peak Food

    NARCIS (Netherlands)

    Koning, N.B.J.

    2015-01-01

    Het kon niet uitblijven. De groei van de voedselproductie stagneert en na Peak Oil dreigt nu Peak Food. Onzin, vindt Niek Koning, die zogenaamde peak is een van de toppen in een langjarige golfbeweging op de landbouwmarkten. Toch zijn er genoeg redenen om je zorgen te maken over de wereldvoedselvoor

  17. Triticella minini - a new ctenostome bryozoan from the abyssal plain adjacent to the Kuril-Kamchatka Trench

    Science.gov (United States)

    Grischenko, Andrei V.; Chernyshev, Alexei V.

    2015-01-01

    A new species of ctenostome bryozoan, Triticella minini sp. nov., is described from the abyssal plain adjacent to the Kuril-Kamchatka Trench, based on material collected by the Russian-German deep-sea expedition KuramBio 2012. Colonies of T. minini sp. nov. were found attached to the oral spines of irregular sea urchin Echinosigra (Echinogutta) amphoraMironov, 1974 by means of rhizoid fibers that penetrated the substratum through circular borings. The specimens were examined by light microscopy, scanning electron microscopy, and confocal laser scanning microscopy with phalloidin and nuclear labeling. The description of T. minini sp. nov. combines a general taxonomic description with a description of the anatomy of the muscular system. The new species differs from congeners in lacking a stolon. It has an intertentacular organ. T. minini sp. nov. is the eleventh species described in the genus TriticellaDalyell, 1848, and the first record for this genus from the northwestern Pacific. The new species is the fifth ctenostome bryozoan known to occur in 5001-5500 m depth interval worldwide, and the deepest record reported for Triticella.

  18. Consistent CMT solutions from Harvard University before great earthquakes in Kurile Islands and its significance for earthquake prediction

    Institute of Scientific and Technical Information of China (English)

    WANG Jun-guo; DIAO Gui-ling

    2005-01-01

    In the paper, we use the Central Moment Tensor (CMT) solution acquired by Harvard University for the earthquakes occurred in Kurile Islands to analyze the consistent focal mechanism in the area and propose the idea of making earthquake prediction based on the consistent parameter a of focal mechanism and stress field. The results from the study indicate that before MW≥7.5 earthquakes, the consistent parameter a decreases, which starts about 10~110 days and ends about 30~2 days before the great earthquakes. Although the phenomenon is not totally the same for individual earthquake, the difference is not large. Certainly, the phenomenon should be tested by time for its reliability. However, it should not be random that the focal mechanism of MW≥5.3 earthquakes are consistent successively with the stress field in an area of several hundreds kilometers in length. It should be a phenomenon of predictive significance. When the accumulated earthquake examples are sufficient, uniform judgment criteria and prediction principles can be stipulated then.

  19. Are Bragg Peaks Gaussian?

    Science.gov (United States)

    Hammouda, Boualem

    2014-01-01

    It is common practice to assume that Bragg scattering peaks have Gaussian shape. The Gaussian shape function is used to perform most instrumental smearing corrections. Using Monte Carlo ray tracing simulation, the resolution of a realistic small-angle neutron scattering (SANS) instrument is generated reliably. Including a single-crystal sample with large d-spacing, Bragg peaks are produced. Bragg peaks contain contributions from the resolution function and from spread in the sample structure. Results show that Bragg peaks are Gaussian in the resolution-limited condition (with negligible sample spread) while this is not the case when spread in the sample structure is non-negligible. When sample spread contributes, the exponentially modified Gaussian function is a better account of the Bragg peak shape. This function is characterized by a non-zero third moment (skewness) which makes Bragg peaks asymmetric for broad neutron wavelength spreads. PMID:26601025

  20. Peak Experience Project

    Science.gov (United States)

    Scott, Daniel G.; Evans, Jessica

    2010-01-01

    This paper emerges from the continued analysis of data collected in a series of international studies concerning Childhood Peak Experiences (CPEs) based on developments in understanding peak experiences in Maslow's hierarchy of needs initiated by Dr Edward Hoffman. Bridging from the series of studies, Canadian researchers explore collected…

  1. Peak Experience Project

    Science.gov (United States)

    Scott, Daniel G.; Evans, Jessica

    2010-01-01

    This paper emerges from the continued analysis of data collected in a series of international studies concerning Childhood Peak Experiences (CPEs) based on developments in understanding peak experiences in Maslow's hierarchy of needs initiated by Dr Edward Hoffman. Bridging from the series of studies, Canadian researchers explore collected…

  2. The central peak revisited

    Energy Technology Data Exchange (ETDEWEB)

    Shirane, G.

    1995-10-27

    The central peak in SrTiO{sub 3} was first observed by Riste and his collaborators in 1971. This was one of the key discoveries leading to an understanding of the dynamics of phase transitions. The most recent discovery of two length scales in SrTiO{sub 3} motivated a reinvestigation of the soft phonon and associated central peak by neutron scattering. These recent experiments shed new light on the nature of the central peak. It is now well established to be strongly sample dependent and it originates from defects in bulk crystals.

  3. Pikes Peak, Colorado

    Science.gov (United States)

    Brunstein, Craig; Quesenberry, Carol; Davis, John; Jackson, Gene; Scott, Glenn R.; D'Erchia, Terry D.; Swibas, Ed; Carter, Lorna; McKinney, Kevin; Cole, Jim

    2006-01-01

    For 200 years, Pikes Peak has been a symbol of America's Western Frontier--a beacon that drew prospectors during the great 1859-60 Gold Rush to the 'Pikes Peak country,' the scenic destination for hundreds of thousands of visitors each year, and an enduring source of pride for cities in the region, the State of Colorado, and the Nation. November 2006 marks the 200th anniversary of the Zebulon M. Pike expedition's first sighting of what has become one of the world's most famous mountains--Pikes Peak. In the decades following that sighting, Pikes Peak became symbolic of America's Western Frontier, embodying the spirit of Native Americans, early explorers, trappers, and traders who traversed the vast uncharted wilderness of the Western Great Plains and the Southern Rocky Mountains. High-quality printed paper copies of this poster are available at no cost from Information Services, U.S. Geological Survey (1-888-ASK-USGS).

  4. Peak Oil, Peak Coal and Climate Change

    Science.gov (United States)

    Murray, J. W.

    2009-05-01

    Research on future climate change is driven by the family of scenarios developed for the IPCC assessment reports. These scenarios create projections of future energy demand using different story lines consisting of government policies, population projections, and economic models. None of these scenarios consider resources to be limiting. In many of these scenarios oil production is still increasing to 2100. Resource limitation (in a geological sense) is a real possibility that needs more serious consideration. The concept of 'Peak Oil' has been discussed since M. King Hubbert proposed in 1956 that US oil production would peak in 1970. His prediction was accurate. This concept is about production rate not reserves. For many oil producing countries (and all OPEC countries) reserves are closely guarded state secrets and appear to be overstated. Claims that the reserves are 'proven' cannot be independently verified. Hubbert's Linearization Model can be used to predict when half the ultimate oil will be produced and what the ultimate total cumulative production (Qt) will be. US oil production can be used as an example. This conceptual model shows that 90% of the ultimate US oil production (Qt = 225 billion barrels) will have occurred by 2011. This approach can then be used to suggest that total global production will be about 2200 billion barrels and that the half way point will be reached by about 2010. This amount is about 5 to 7 times less than assumed by the IPCC scenarios. The decline of Non-OPEC oil production appears to have started in 2004. Of the OPEC countries, only Saudi Arabia may have spare capacity, but even that is uncertain, because of lack of data transparency. The concept of 'Peak Coal' is more controversial, but even the US National Academy Report in 2007 concluded only a small fraction of previously estimated reserves in the US are actually minable reserves and that US reserves should be reassessed using modern methods. British coal production can be

  5. Peak of Achievement

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    China’s first inland research station on the highest peak of Antarctic progresses smoothly China will complete the construction of its first inland Antarctic research station at Dome A,the highest polar icecap peak at 4,093 meters above sea level,next year,according to a south pole scientist involved in the project. "The preparatory work for the new sta-

  6. Deep-sea epibiotic hydroids from the abyssal plain adjacent to the Kuril-Kamchatka Trench with description of Garveia belyaevi sp. nov. (Hydrozoa, Bougainvilliidae)

    Science.gov (United States)

    Stepanjants, Sofia D.; Chernyshev, Alexey V.

    2015-01-01

    Examination of material collected by the German-Russian KuramBio Deep-Sea Expedition to the abyssal plain adjacent to the Kuril-Kamchatka Trench revealed about 17 hydroid species, including two species presumably new to science. Before the KuramBio Expedition only fragments of the unidentified hydroids and Cryptolaria sp. were collected in the Kuril-Kamchatka Trench from depths exceeding 3000 m. Descriptions of three species of epibiotic hydroids (including one new species, Garveia belyaevi sp. nov.) are presented herein. A colony of G. belyaevi sp. nov. (the third deep-sea and deepest species of the wide distributed genus Garveia) was attached to the spines of unidentified irregular sea urchins from depths 5217 to 5229 m. Нalitholus (?) sp. (Hydrozoa, Anthoathecata) colonized the skin of spoon worms (Echiura) but could not be identified to species level because the mature medusa stage was absent in the material. An unidentified juvenile polyp (Pandeidae) was found on the bryozoan Tricitella minini attached to spines of irregular sea urchins Echinosigra amphora. Colonial sedentary organisms inhabiting abyssal plains with soft bottoms may colonize invertebrates which are seldom used as substrates for epibiota in shallow waters. Epibiosis among abyssal colonial invertebrates, though extremely poorly studied, appears to be rather frequent.

  7. Volcano-Hydrothermal Systems of the Central and Northern Kuril Island Arc - a Review

    Science.gov (United States)

    Kalacheva, E.; Taran, Y.; Voloshina, E.; Ptashinsky, L.

    2015-12-01

    More than 20 active volcanoes with historical eruptions are known on 17 islands composing the Central and Northern part of the Kurilian Arc. Six islands - Paramushir, Shiashkotan, Rasshua, Ushishir, Ketoy and Simushir - are characterized by hydrothermal activity, complementary to the fumarolic activity in their craters. There are several types of volcano-hydrothermal systems on the islands. At Paramushir, Shiashkotan and Ketoy the thermal manifestations are acidic to ultra-acidic water discharges associated with hydrothermal aquifers inside volcano edifices and formed as the result of the absorption of magmatic gases by ground waters. A closest known analogue of such activity is Satsuma-Iwojima volcano-island at the Ryukyu Arc. Another type of hydrothermal activity are wide spread coastal hot springs (Shiashkotan, Rasshua), situated as a rule within tide zones and formed by mixing of the heated seawater with cold groundwater or, in opposite, by mixing of the steam- or conductively heated groundwater with seawater. This type of thermal manifestation is similar to that reported for other volcanic islands of the world (Satsuma Iwojima, Monserrat, Ischia, Socorro). Ushishir volcano-hydrothermal system is formed by the absorption of magmatic gases by seawater. Only Ketoy Island hosts a permanent acidic crater lake. At Ebeko volcano (Paramushir) rapidly disappearing small acidic lakes (formed after phreatic eruptions) have been reported. The main hydrothermal manifestation of Simushir is the Zavaritsky caldera lake with numerous coastal thermal springs and weak steam vents. The last time measured temperatures of fumaroles at the islands are: >500ºC at Pallas Peak (Ketoy), 480ºC at Kuntamintar volcano (Shiashkotan), variable and fast changing temperatures from 120º C to 500ºC at Ebeko volcano (Paramushir), 150ºC in the Rasshua crater, and > 300ºC in the Chirpoy crater (Black Brothers islands). The magmatic and rock-forming solute output by the Kurilian volcano

  8. Correlation-Peak Imaging

    Science.gov (United States)

    Ziegler, A.; Metzler, A.; Köckenberger, W.; Izquierdo, M.; Komor, E.; Haase, A.; Décorps, M.; von Kienlin, M.

    1996-08-01

    Identification and quantitation in conventional1H spectroscopic imagingin vivois often hampered by the small chemical-shift range. To improve the spectral resolution of spectroscopic imaging, homonuclear two-dimensional correlation spectroscopy has been combined with phase encoding of the spatial dimensions. From the theoretical description of the coherence-transfer signal in the Fourier-transform domain, a comprehensive acquisition and processing strategy is presented that includes optimization of the width and the position of the acquisition windows, matched filtering of the signal envelope, and graphical presentation of the cross peak of interest. The procedure has been applied to image the spatial distribution of the correlation peaks from specific spin systems in the hypocotyl of castor bean (Ricinus communis) seedlings. Despite the overlap of many resonances, correlation-peak imaging made it possible to observe a number of proton resonances, such as those of sucrose, β-glucose, glutamine/glutamate, lysine, and arginine.

  9. Unexpectedly higher metazoan meiofauna abundances in the Kuril-Kamchatka Trench compared to the adjacent abyssal plains

    Science.gov (United States)

    Schmidt, Christina; Martínez Arbizu, Pedro

    2015-01-01

    We studied meiofauna standing stocks and community structure in the Kuril-Kamchatka Trench and its adjacent abyssal plains in the northwestern Pacific Ocean. In general, the Nematoda were dominant (93%) followed by the Copepoda (4%). Nematode abundances ranged from 87% to 96%; those of copepods from 2% to 7%. The most diverse deployment yielded 17 taxa: Acari, Amphipoda, Annelida, Bivalvia, Coelenterata, Copepoda, Cumacea, Gastrotricha, Isopoda, Kinorhyncha, Loricifera, Nematoda, Ostracoda, Priapulida, Tanaidacea, Tantulocarida, and Tardigrada. Nauplii were also present. Generally, the trench slope and the southernmost deployments had the highest abundances (850-1392 individuals/cm2). The results of non-metric multidimensional scaling indicated that these deployments were similar to each other in meiofauna community structure. The southernmost deployments were located in a zone of higher particulate organic carbon (POC) flux (g Corg m-2 yr-1), whereas the trench slope should have low POC flux due to depth attenuation. Also, POC and abundance were significantly correlated in the abyssal plains. This correlation may explain the higher abundances at the southernmost deployments. Lateral transport was also assumed to explain high meiofauna abundances on the trench slope. Abundances were generally higher than expected from model results. ANOSIM revealed significant differences between the trench slope and the northern abyssal plains, between the central abyssal plains and the trench slope, between the trench slope and the southern abyssal plains, between the central and the southern abyssal plains, and between the central and northern deployments. The northern and southern abyssal plains did not differ significantly. In addition, a U-test revealed highly significant differences between the trench-slope and abyssal deployments. The taxa inhabited mostly the upper 0-3 cm of the sediment layer (Nematoda 80-90%; Copepoda 88-100%). The trench-slope and abyssal did not differ

  10. Peak-interviewet

    DEFF Research Database (Denmark)

    Raalskov, Jesper; Warming-Rasmussen, Bent

    Peak-interviewet er en særlig effektiv metode til at gøre ubevidste menneskelige ressourcer bevidste. Fokuspersonen (den interviewede) interviewes om en selvvalgt, personlig succesoplevelse. Terapeuten/coachen (intervieweren) spørger ind til processen, som ledte hen til denne succes. Herved afdæk...

  11. Peak-interviewet

    DEFF Research Database (Denmark)

    Raalskov, Jesper; Warming-Rasmussen, Bent

    Peak-interviewet er en særlig effektiv metode til at gøre ubevidste menneskelige ressourcer bevidste. Fokuspersonen (den interviewede) interviewes om en selvvalgt, personlig succesoplevelse. Terapeuten/coachen (intervieweren) spørger ind til processen, som ledte hen til denne succes. Herved afdæk...

  12. Impact Crater with Peak

    Science.gov (United States)

    2002-01-01

    (Released 14 June 2002) The Science This THEMIS visible image shows a classic example of a martian impact crater with a central peak. Central peaks are common in large, fresh craters on both Mars and the Moon. This peak formed during the extremely high-energy impact cratering event. In many martian craters the central peak has been either eroded or buried by later sedimentary processes, so the presence of a peak in this crater indicates that the crater is relatively young and has experienced little degradation. Observations of large craters on the Earth and the Moon, as well as computer modeling of the impact process, show that the central peak contains material brought from deep beneath the surface. The material exposed in these peaks will provide an excellent opportunity to study the composition of the martian interior using THEMIS multi-spectral infrared observations. The ejecta material around the crater can is well preserved, again indicating relatively little modification of this landform since its initial creation. The inner walls of this approximately 18 km diameter crater show complex slumping that likely occurred during the impact event. Since that time there has been some downslope movement of material to form the small chutes and gullies that can be seen on the inner crater wall. Small (50-100 m) mega-ripples composed of mobile material can be seen on the floor of the crater. Much of this material may have come from the walls of the crater itself, or may have been blown into the crater by the wind. The Story When a meteor smacked into the surface of Mars with extremely high energy, pow! Not only did it punch an 11-mile-wide crater in the smoother terrain, it created a central peak in the middle of the crater. This peak forms kind of on the 'rebound.' You can see this same effect if you drop a single drop of milk into a glass of milk. With craters, in the heat and fury of the impact, some of the land material can even liquefy. Central peaks like the one

  13. The impact of tidal mixing at the Kuril Straits on the North Pacific: Part 2, Thermohaline adjustment of the intermediate layer

    Science.gov (United States)

    Toyoda, T.; Nakamura, T.; Ishikawa, Y.; Awaji, T.

    2003-04-01

    Recent studies show the importance of strong mixing at the Kuril Straits in freshning the intermediate layer to supply the low salinity water required for the production of the North Pacific Intermediate Water (NPIW) which is distributed over the entire subtropical gyre [Talley, 1991]. Nakamura et al.(2000; 2003) indicate that the strong vertical mixing is driven by a swift tidal flow and suggest that it has the ability to change the fluxes of potential vorticity (PV) and other water properties from the Okhotsk Sea to the North Pacific. Such an effect of tidal mixing at the western boundary is expected to affect the subarctic circulation based on the ventilated thermocline theory [Pedlosky, 1996], as well as the subsurface circulation in the subtropical region. In order to assess the impacts of tidal mixing at the Kurils on the circulation of the North Pacifc, a set of experiments are performed using a global ocean general circulation model. The Okhotsk Sea water flowing into the intermediate layer of the North Pacific becomes colder and fresher at the Kurils by strong vertical mixing. This enhances the supply of low PV water to the North Pacific intermediate layer, particulalrly in spring. Our analysis shows that the dynamical adjustment to the western boundary mixing is conducted by both Kelvin and Rossby waves of 2nd and higher modes. The Kelvin waves propagate along the coast against the Kuroshio current, and split into two components: one propagating along the equator and the other passing through the Indonesian Archipelago. On the other hands, since the higher-mode Rossby waves are affected by the mean flow field, the waves move eastward. This feature differs from the classical thermohaline adjustment proccess of the deep layer (e.g., Kawase 1987), which takes into account the role of Kelvin waves alone in the eastward spreading. The propagation of both types of waves significantly modifies the circulation of the North Pacific intermediate layer

  14. Japan and Russia at the beginning of the twenty-first century: -New dimension to maritime security surrounding the ‘Kuril Islands’

    Directory of Open Access Journals (Sweden)

    Mihoko Kato

    2013-05-01

    Full Text Available Desde que Moscú decidió albergar la cumbre APEC en Vladivostok, tanto decisores rusos como académicos han estado discutiendo sobre Rusia como una “potencia Euro-Pacífica”. Sin embargo, las prioridades regionales y bilaterales de Rusia en Asia, así como su estrategia para convertirse en un poder Pacífico siguen siendo inciertas. Con el aumento en importancia de un Océano Ártico libre de hielo, el área marítima de la región del Lejano Este gana en importancia para la armada rusa. Este artículo examina cómo el deshielo en el Océano Ártico podría influir la seguridad en torno a las Islas Kuriles.

  15. New deep-sea large free-living nematodes from macrobenthos in the Kuril-Kamchatka Trench (the North-Western Pacific)

    Science.gov (United States)

    Fadeeva, Natalia; Mordukhovich, Vladimir; Zograf, Julia

    2015-01-01

    The composition of deep-sea nematode assemblages of the North-Western (NW) Pacific is poorly-studied. According to the available literature data more than 700 valid species of nematodes were reported from the depth of 400 m and deeper, out of that only 6 species were registered in the NW Pacific: 2 species from the coast of the Japanese Islands and 4 from the Sea of Japan. Ecological studies of the deep-sea nematode communities of this region are scanty and represent very scarce and fragmentary information. The first recent study of free-living nematodes collected from the abyssal plain adjacent to the Kuril-Kamchatka Trench has revealed more than 50 species of nematodes in macrobenthic samples. Families Anticomidae, Comesomatidae, Desmodoridae, Leptosomatidae, Oncholaimidae, Oxystominidae, Phanodermatidae, Siphonolaimidae and Thoracostomopsidae were the most abundant and diverse. Such taxonomic composition differs greatly from previously described meiobenthical nematode communities of NW Pacific and even World Ocean and similar to macrofaunal nematode assemblages of the Atlantic and Arctic regions. Several genera of nematodes can be considered as new records for the NW Pacific region. Micoletzkyia kamchatika sp. nov., Metaphanoderma improvisa sp. nov., and Phylloncholaimus palmaris sp. nov. are described from the Kuril-Kamchatka Trench. Micoletzkyia kamchatika sp. nov. is particularly characterized by a developed cuticular cephalic capsule underlying amphids, relatively small amphids, and the shape of the gubernaculum. Metaphanoderma improvisa sp. nov. is particularly characterized by a developed cuticular cephalic capsule, relatively large amphids, and the absence of pigmented eye spots. Phylloncholaimus palmaris sp. nov. is similar to the type species in many measurements but may be differentiated from that by the smaller amphid, shape of spicules and gubernaculums and by large precloacal papillae with four setae.

  16. Geyser Peak Cabernet Sauvignon

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>年份:2000产地:美国加州Sonoma County售价:$196 Geyser Peak(盖世峰)成立于1880年,是美国军有的过百岁葡萄酒庄。可惜美国酿制葡萄酒的技术在近三四十年才有突破,历史再悠久也没有太多帮助近二十年Geyser Peak就努力改进,希望迎头赶上其它加州新秀的水平,1989年,他们就聘请了澳洲Penfolds酒庄的酿酒师Daryl Groom,让旗下出品多了一份澳洲式的"霎眼娇"风格。2003年,Geyser Peak更在International Wine & Spirit Competition赢得"最佳美国葡萄酒生产商"大奖。

  17. Peak mass and dynamical friction

    CERN Document Server

    Del Popolo, A

    1995-01-01

    We show how the results given by several authors relatively to the mass of a density peak are changed when small scale substructure induced by dynamical friction are taken into account. The peak mass obtained is compared to the result of Peacock \\& Heavens (1990) and to the peak mass when dynamical friction is absent to show how these effects conspire to reduce the mass accreted by the peak.

  18. Peak capacity in unidimensional chromatography.

    Science.gov (United States)

    Neue, Uwe Dieter

    2008-03-14

    The currently existing knowledge about peak capacity in unidimensional separations is reviewed. The majority of the paper is dedicated to reversed-phase gradient chromatography, covering specific techniques as well as the subject of peak compression. Other sections deal with peak capacity in isocratic chromatography, size-exclusion chromatography and ion-exchange chromatography. An important topic is the limitation of the separation power and the meaning of the concept of peak capacity for real applications.

  19. Chlorine Stable Isotopes to reveal contribution of magmatic chlorine in subduction zones: the case of the Kamchatka-Kuril and the Lesser Antilles Volcanic Arcs

    Science.gov (United States)

    Agrinier, Pierre; Shilobreeva, Svetlana; Bardoux, Gerard; Michel, Agnes; Maximov, Alexandr; Kalatcheva, Elena; Ryabinin, Gennady; Bonifacie, Magali

    2015-04-01

    By using the stable isotopes of chlorine (δ 37Cl), we have shown that magmatic chlorine (δ 37Cl ≤ -0.6 ‰ [1]) is different from surface chlorine (δ 37Cl ≈ 0 ‰ [1]) in hydrothermal system of Soufrière and Montagne Pelé from the young arc volcanic system of Lesser Antilles. First measurements on condensed chlorides from volcanic gases (e.g. [2], [3]) did not permitted to get sensible δ 37Cl values on degassed chlorine likely because chlorine isotopes are fractionated during the HClgas - chloride equilibrium in the fumaroles or during sampling artifacts. Therefore we have developed an alternative strategy based on the analysis of chloride in thermal springs, streams, sout{f}lowing on the flanks of the volcanoes. Due to the highly hydrophilic behavior of Cl, we hypothesize that thermal springs incorporate chlorine without fractionation of chlorine isotopes and might reflect the chlorine isotopic composition degassed by magmas [1]. Indeed Thermal spring with low δ 37Cl chlorides (≤ -0.6 perthousand{}) are linked with magmatic volatiles characters (3He ratio at 5 Ra at and δ 13C CO2 quad ≈ -3 perthousand{}). To go further in the potentiality of using the Chlorine isotopes to reveal contribution of magmatic chlorine in volcanic systems, we have started the survey of thermal springs and wells waters in the Kamchatka-Kuril volcanic mature Arc (on sites Mutnovsky, Paratunka, Nalychevsky, Khodutkinsky, Paramushir Island, identified by Taran, 2009 [4] for concentrations of chloride). Preliminary results show δ 37Cl values ranging from 0.5 to -0.2 ‰ and generally higher chloride concentrations. The δ 37Cl values are higher than the value recorded for the young arc volcanic system of lesser Antilles. At present moment very few negative δ 37Cl have been measured in the Kamchatka-Kuril volcanic mature Arc. [1] Li et al., 2015 EPSL in press. [2] Sharp et al. 2010 GCA. [3] Rizzo et al., 2013, EPSL, 371, 134. [4] Taran, 2009, GCA, 73, 1067

  20. The nexus of soil radon and hydrogen dynamics and seismicity of the northern flank of the Kuril-Kamchatka subduction zone

    Directory of Open Access Journals (Sweden)

    O. P. Malysheva

    2007-06-01

    Full Text Available The comparison of kinematics and dynamic parameters of radon and molecular hydrogen concentration in subsoil air on the stations network at the Petropavlovsk-Kamchatsky geodynamic proving ground with seismicity of the northern flank of the Kuril-Kamchatka subduction zone was fulfilled in the period from July till August 2004. On the basis of correlation analysis of the regional seismicity and variations of radon flux density calculated using the data of gas-discharge counters of STS-6 type and SSNTDs it was shown that the radon mass transfer abnormal variations are conditioned by both regional seismicity in total and the subduction zone of proving ground. The azimuths of «geodeformation waves» coming to the registration points are calculated during clearly expressed anomaly beginnings, which coincide with directions to earthquake epicenters taking place at the same time. The geochemical anomalies recorded are presumptively deformative by nature and can be conditioned by processes of «quasi-viscous» flow of the lithosphere during rearrangement of tectonic stress fields of the subduction zone. The short-term (predicted time ? <14 days precursor of the earthquakes swarm was revealed in hydrogen dynamics on August, 4-5 (four earthquakes had M?5.3 and epicentral distance about 130 km from the Paratunka base station.

  1. PEAK SHAVING CONSIDERING STREAMFLOW UNCERTAINTIES

    African Journals Online (AJOL)

    user

    The main thrust of this paper is peak shaving with a Stochastic hydro model. In peak sharing, the amount of ... Fuel cost at a conventional hydro plant is nil. On the other hand, the ... s(k) = spill at the hydro plant in period k. I(k) = loss due to ...

  2. How to use your peak flow meter

    Science.gov (United States)

    Peak flow meter - how to use; Asthma - peak flow meter; Reactive airway disease - peak flow meter; Bronchial asthma - peak flow meter ... If your airways are narrowed and blocked due to asthma, your peak flow values drop. You can ...

  3. Doppler peaks from active perturbations

    CERN Document Server

    Magueijo, J; Coulson, D; Ferreira, P; Magueijo, Joao; Albrecht, Andreas; Coulson, David; Ferreira, Pedro

    1995-01-01

    We examine how the qualitative structure of the Doppler peaks in the angular power spectrum of the cosmic microwave anisotropy depends on the fundamental nature of the perturbations which produced them. The formalism of Hu and Sugiyama is extended to treat models with cosmic defects. We discuss how perturbations can be ``active'' or ``passive'' and ``incoherent'' or ``coherent'', and show how causality and scale invariance play rather different roles in these various cases. We find that the existence of secondary Doppler peaks and the rough placing of the primary peak unambiguously reflect these basic properties.

  4. Make peak flow a habit!

    Science.gov (United States)

    ... asthma - peak flow References Durrani SR, Busse WW. Management of asthma in adolescents and adults. In: Adkinson NF Jr, Bochner BS, Burks AW, et al, eds. Middleton's Allergy Principles and Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

  5. Neural network approach to the prediction of seismic events based on low-frequency signal monitoring of the Kuril-Kamchatka and Japanese regions

    Directory of Open Access Journals (Sweden)

    Irina Popova

    2013-08-01

    Full Text Available Very-low-frequency/ low-frequency (VLF/LF sub-ionospheric radiowave monitoring has been widely used in recent years to analyze earthquake preparatory processes. The connection between earthquakes with M ≥5.5 and nighttime disturbances of signal amplitude and phase has been established. Thus, it is possible to use nighttime anomalies of VLF/LF signals as earthquake precursors. Here, we propose a method for estimation of the VLF/LF signal sensitivity to seismic processes using a neural network approach. We apply the error back-propagation technique based on a three-level perceptron to predict a seismic event. The back-propagation technique involves two main stages to solve the problem; namely, network training, and recognition (the prediction itself. To train a neural network, we first create a so-called ‘training set’. The ‘teacher’ specifies the correspondence between the chosen input and the output data. In the present case, a representative database includes both the LF data received over three years of monitoring at the station in Petropavlovsk-Kamchatsky (2005-2007, and the seismicity parameters of the Kuril-Kamchatka and Japanese regions. At the first stage, the neural network established the relationship between the characteristic features of the LF signal (the mean and dispersion of a phase and an amplitude at nighttime for a few days before a seismic event and the corresponding level of correlation with a seismic event, or the absence of a seismic event. For the second stage, the trained neural network was applied to predict seismic events from the LF data using twelve time intervals in 2004, 2005, 2006 and 2007. The results of the prediction are discussed.

  6. Peak Oil and other threatening peaks-Chimeras without substance

    Energy Technology Data Exchange (ETDEWEB)

    Radetzki, Marian, E-mail: marian@radetzki.bi [Lulea University of Technology (Sweden)

    2010-11-15

    The Peak Oil movement has widely spread its message about an impending peak in global oil production, caused by an inadequate resource base. On closer scrutiny, the underlying analysis is inconsistent, void of a theoretical foundation and without support in empirical observations. Global oil resources are huge and expanding, and pose no threat to continuing output growth within an extended time horizon. In contrast, temporary or prolonged supply crunches are indeed plausible, even likely, on account of growing resource nationalism denying access to efficient exploitation of the existing resource wealth.

  7. Peak Oil and other threatening peaks. Chimeras without substance

    Energy Technology Data Exchange (ETDEWEB)

    Radetzki, Marian [Luleaa University of Technology (Sweden)

    2010-11-15

    The Peak Oil movement has widely spread its message about an impending peak in global oil production, caused by an inadequate resource base. On closer scrutiny, the underlying analysis is inconsistent, void of a theoretical foundation and without support in empirical observations. Global oil resources are huge and expanding, and pose no threat to continuing output growth within an extended time horizon. In contrast, temporary or prolonged supply crunches are indeed plausible, even likely, on account of growing resource nationalism denying access to efficient exploitation of the existing resource wealth. (author)

  8. Ultrasonic Transducer Peak-to-Peak Optical Measurement

    Directory of Open Access Journals (Sweden)

    Pavel Skarvada

    2012-01-01

    Full Text Available Possible optical setups for measurement of the peak-to-peak value of an ultrasonic transducer are described in this work. The Michelson interferometer with the calibrated nanopositioner in reference path and laser Doppler vibrometer were used for the basic measurement of vibration displacement. Langevin type of ultrasonic transducer is used for the purposes of Electro-Ultrasonic Nonlinear Spectroscopy (EUNS. Parameters of produced mechanical vibration have to been well known for EUNS. Moreover, a monitoring of mechanical vibration frequency shift with a mass load and sample-transducer coupling is important for EUNS measurement.

  9. Significance Tests for Periodogram Peaks

    CERN Document Server

    Frescura, F A M; Frank, B S

    2007-01-01

    We discuss methods currently in use for determining the significance of peaks in the periodograms of time series. We discuss some general methods for constructing significance tests, false alarm probability functions, and the role played in these by independent random variables and by empirical and theoretical cumulative distribution functions. We also discuss the concept of "independent frequencies" in periodogram analysis. We propose a practical method for estimating the significance of periodogram peaks, applicable to all time series irrespective of the spacing of the data. This method, based on Monte Carlo simulations, produces significance tests that are tailor-made for any given astronomical time series.

  10. Hubbert's Peak -- A Physicist's View

    Science.gov (United States)

    McDonald, Richard

    2011-04-01

    Oil, as used in agriculture and transportation, is the lifeblood of modern society. It is finite in quantity and will someday be exhausted. In 1956, Hubbert proposed a theory of resource production and applied it successfully to predict peak U.S. oil production in 1970. Bartlett extended this work in publications and lectures on the finite nature of oil and its production peak and depletion. Both Hubbert and Bartlett place peak world oil production at a similar time, essentially now. Central to these analyses are estimates of total ``oil in place'' obtained from engineering studies of oil reservoirs as this quantity determines the area under the Hubbert's Peak. Knowing the production history and the total oil in place allows us to make estimates of reserves, and therefore future oil availability. We will then examine reserves data for various countries, in particular OPEC countries, and see if these data tell us anything about the future availability of oil. Finally, we will comment on synthetic oil and the possibility of carbon-neutral synthetic oil for a sustainable future.

  11. Discriminate Modelling of Peak and Off-Peak Motorway Capacity

    Directory of Open Access Journals (Sweden)

    Hashim Mohammed Alhassan

    2013-02-01

    Full Text Available Traffic theory is concerned with the movement of discrete objects in real time over a finite network in 2 Dimensions. It is compatible with or dependent on fundamental diagram of traffic. Without question traffic flow is an essential quantitative parameter that is used in planning, designs and roadway improvements.  Road capacity is significant because it is an important indicator of road performance and can point road managers in the right road maintenance and traffic management direction. In this paper four direct empirical capacity measurement methods have been considered. To test the efficacy of each method, data for peak period, off-peak and transition to peak have been used. The headway and the volume methods lack predictive capability and are suitable only for current assessment of flow rates.  The product limit method is weak in its predictive capability in view of the arbitrariness in the selection of the capacity value. It is also an extreme value method; hence not all volume data can be used with this method. The fundamental diagram method has good predictive capability and furnishes capacity values consistent with the standard of the facility. Unlike other methods, it does not rely on bottleneck conditions to deliver the capacity value.  The paper concluded that each method is uniquely suited to prevailing conditions and can be so employed.

  12. Intensive hydration of the wedge mantle at the Kuril arc - NE Japan arc junction: implications from mafic lavas from Usu Volcano, northern Japan

    Science.gov (United States)

    Kuritani, T.; Tanaka, M.; Yokoyama, T.; Nakagawa, M.; Matsumoto, A.

    2015-12-01

    The southwestern part of Hokkaido, northern Japan, is located at the junction of the NE Japan arc and the Kuril arc. The subducting Pacific plate under this region shows a hinge-like shape due to the dip change of the subducting plate along the trench. Because of the interest in this unique tectonic setting, this arc-arc junction has been the focus of extensive geophysical studies (e.g. Kita et al., 2010, Morishige and van Keken, 2014; Wada et al., 2015). This region is also known as an area in which magmatism has been intense; there are many active volcanoes such as Usu, Tarumae, and Komagatake, and large calderas including Toya, Shikotsu, and Kuttara. In this region, the temporal and spatial evolution of the volcanism and the chemical compositions of the volcanic rocks are well characterized (e.g. Nakagawa, 1992). However, the generation conditions of magmas have not been estimated for these volcanoes, probably because of the scarcity of basaltic products. Therefore, a possible link between the tectonic setting and the intense magmatism is still unclear. In this study, we carried out a petrological and geochemical study on mafic lavas (49.6-51.3 wt.% SiO2) from Usu Volcano, and estimated the conditions under which the magmas were generated. By application of a plagioclase-melt hygrometer to the plagioclase and the host magma, the water content of ~6.5 wt.% was obtained for the basaltic magma. Using this information, as well as the olivine maximum fractionation model (Tatsumi et al., 1983), the composition of the primary magma is estimated to be 47.9 wt.% SiO2, 15.1 wt.% MgO, and 4.1 wt.% H2O. Analyses using the multi-component thermodynamics suggest that the primary magma was generated in the source mantle with 0.9 wt.% H2O at 1310ºC and at 1.6 GPa. The water content of 0.9 wt.% of the source mantle is significantly higher than the estimates for the source mantle in the main NE Japan arc (hinge-like shape, and many fractures might have been developed in the slab

  13. Longitudinal peak detected Schottky spectrum

    CERN Document Server

    Shaposhnikova, E

    2009-01-01

    The "peak detected Schottky" spectrum is a diagnostic used since the late seventies for beam observation in the SPS and now already applied to the LHC. This tool was always believed, however without proof, to give a good picture of the particle distribution in synchrotron frequencies similar to the longitudinal Schottky spectrum of unbunched beam for revolution frequencies.In this paper an analysis of this measurement technique is presented both in a general form and for the particular realisation in the SPS. In addition the limitations of the present experimental set-up are discussed together with possible improvements. The analysis shows that for an optimised experimental set-up the spectrum of the peak detected signal is very close to the synchrotron frequency distribution inside the bunch - much closer than that given by the traditional longitudinal bunched-beam Schottky spectrum.

  14. Drivers of peak sales for pharmaceutical brands

    NARCIS (Netherlands)

    Fischer, Marc; Leeflang, Peter S. H.; Verhoef, Peter C.

    2010-01-01

    Peak sales are an important metric in the pharmaceutical industry. Specifically, managers are focused on the height-of-peak-sales and the time required achieving peak sales. We analyze how order of entry and quality affect the level of peak sales and the time-to-peak-sales of pharmaceutical brands.

  15. [Population genetic structure of the char species of the Northern Kuril Islands and the rank of the Dolly Varden Char in the system of the genus Salvelinus (Salmonidae: Teleostei)].

    Science.gov (United States)

    Shubina, E A; Ponomareva, E V; Gritsenko, O F

    2006-01-01

    Analysis of the taxonomic position of most species and forms of the char (genus Salvelinus, Salmonidae: Teleostei) was made based on RAPD-PCR. The material was represented by samples from 29 populations from the Kuril Islands, coast of the Sea of Okhotsk, Kamchatka, Chukotka, Taymyr, Transbaikalia, the Kola Peninsula, Svalbard, Finland, and North America. It was shown that the genus Salvelinus splits into three well-justified clusters: (1) all the forms assigned to the Salvelinus alpinus--S. malma complex; (2) two samples of the White-Spotted Char from the Southern Kuril Islands and from Kamchatka; (3) two North American species, S. fontinalis and S. namaycush (samples of the North American species S. confluentis were absent from the collection). Analysis of the absolute values of genetic disctances of the S. alpinus--S. malma forms relative to S. leucomaenis, S. fontinalis, and S. namaycush revealed distances approaching the species rank between the following isolates: Frolikh Char, Mountain Char, Black Lake Char, Goggle-Eyed Char, and Neyva Char. Samples of Dolly Varden currently considered as "S. malma", do not constitute a separate cluster, falling within the group of the Arctic char S. alpinus. This conclusion is supported by the analysis of the results of three series of experiments by R. Phillips on ITS1 ribosome genes (Pleute et al., 1992; Phillips et al., 1995; Phillips et al., 1999). This indicates the infraspecific rank of malma within S. alpinus. Isolated populations of "Salvethymus svetovidovi" from the lake Elgygytgyn (Chukotka Peninsula) and of the char from the lake Chyornoye (Onekotan Island), recently described as S. gritzenkoi (Vasil'eva, Stygar, 2000), fell withing the S. alpinus--S. malma complex, the Onekotan char grouped together with another isolate from the same island. Comparison of genetic distances between the samples showed that the differences between the two isolated of Onekotan and migratory forms of the Kuril Islands are

  16. Composition, volatile components, and trace elements in andesitic melts of the Kurile-Kamchatka region%俄罗斯Kurile-Kamchatka地区安山质熔体的成分、挥发分组成和微量元素

    Institute of Scientific and Technical Information of China (English)

    M.L.Tolstykh; V.B.Naumov; A.D.Babansky

    2007-01-01

    Melt inclusions in minerals from some volcanoes of the Kurile-Kamchatka region were examined. The studied basaltic andesites and andesites were sampled from volcanoes of the Central Kamchatka depression ( Shiveluch and Bezymyannyi), Eastern Kamchatka volcanic belt (Avachinskii and Karymskii), and Iturup Island, Southern Kuriles (Kudryavyi). Basalts of the 1996 eruption of the Karymskii volcanic center and dacites of Dikii Greben' volcano, Southern Kamchatka were also studied. More than 260 melt inclusions from 31 rock samples were homogenized, and quenched glasses were analyzed using electron and ion microprobes. The compositions of melt inclusions in andesitic phenocrysts vary in silica contents from 56 to 80wt%. Al2O3 , FeO, MgO, CaO decrease and Na2O and K2O increase with increasing SiO2. Many inclusions ( about 80% ) are dacitic or rhyolitic. However, the compositions of silicic glasses ( >65wt% SiO2 ) in andesites significantly differ in TiO2 , FeO, MgO, CaO, and K2O contents from those in dacites and rhyolites. High-potassium melts (K2O 3.8 ~6.8wt% ) with various SiO2 from 51.4 to 77.2wt% were found in minerals of all volcanoes studied. This indicates a contribution of a component selectively enriched in potassium to magmas of the whole region. A great compositional diversity of melt inclusions in plagioclase phenocrysts from the Bezymyannyi andesites suggests a complex history of plagioclase crystallization and magma evolution in the andesite formation. Melts from different volcanoes strongly vary in volatile contents. The highest H2O contents are found in the melts from Shiveluch (3.0 ~7.2wt%, 4.7wt% on average) and Avachinskii (4.7 ~4.8wt% ); while those are lower in melts of Kudryavyi (0.1 ~ 2.6wt% ), Dikii Greben' (0.4 ~ 1.8wt% ), and Bezymyannyi ( < 1wt% ). Chlorine contents are also variable. The lowest values are found in the Bezymyannyi melts (0.09wt% on average), the highest Cl contents are typical of melt inclusions in minerals from

  17. Neurofeedback training for peak performance

    Directory of Open Access Journals (Sweden)

    Marek Graczyk

    2014-11-01

    Full Text Available [b]aim[/b]. One of the applications of the Neurofeedback methodology is peak performance in sport. The protocols of the neurofeedback are usually based on an assessment of the spectral parameters of spontaneous EEG in resting state conditions. The aim of the paper was to study whether the intensive neurofeedback training of a well-functioning Olympic athlete who has lost his performance confidence after injury in sport, could change the brain functioning reflected in changes in spontaneous EEG and event related potentials (ERPs. [b]case study[/b]. The case is presented of an Olympic athlete who has lost his performance confidence after injury in sport. He wanted to resume his activities by means of neurofeedback training. His QEEG/ERP parameters were assessed before and after 4 intensive sessions of neurotherapy. Dramatic and statistically significant changes that could not be explained by error measurement were observed in the patient. [b]conclusion[/b]. Neurofeedback training in the subject under study increased the amplitude of the monitoring component of ERPs generated in the anterior cingulate cortex, accompanied by an increase in beta activity over the medial prefrontal cortex. Taking these changes together, it can be concluded that that even a few sessions of neurofeedback in a high performance brain can significantly activate the prefrontal cortical areas associated with increasing confidence in sport performance.

  18. Peak Detection Using Wavelet Transform

    Directory of Open Access Journals (Sweden)

    Omar Daoud

    2014-07-01

    Full Text Available A new work based-wavelet transform is designed to o vercome one of the main drawbacks that found in the present new technologies. Orthogonal Frequency Divi sion Multiplexing (OFDMis proposed in the literature to enhance the multimedia resolution. Ho wever, the high peak power (PAPR values will obstr uct such achievements. Therefore, a new proposition is found in this work, making use of the wavelet transforms methods, and it is divided into three ma in stages; de-noising stage, thresholding stage and then the replacement stage. In order to check the system stages validity; a mat hematical model has been built and its checked afte r using a MATLAB simulation. A simulated bit error ra te (BER achievement will be compared with our previously published work, where an enhancement fro m 8×10 -1 to be 5×10 -1 is achieved. Moreover, these results will be compared to the work found in the l iterature, where we have accomplished around 27% PAPR extra reduction. As a result, the BER performance has been improved for the same bandwidth occupancy. Moreover and due to the de-noise stage, the verification rate ha s been improved to reach 81%. This is in addition t o the noise immunity enhancement.

  19. Facility Location with Double-peaked Preferences

    DEFF Research Database (Denmark)

    Filos-Ratsikas, Aris; Li, Minming; Zhang, Jie

    2015-01-01

    We study the problem of locating a single facility on a real line based on the reports of self-interested agents, when agents have double-peaked preferences, with the peaks being on opposite sides of their locations. We observe that double-peaked preferences capture real-life scenarios and thus...... complement the well-studied notion of single-peaked preferences. We mainly focus on the case where peaks are equidistant from the agents’ locations and discuss how our results extend to more general settings. We show that most of the results for single-peaked preferences do not directly apply to this setting...

  20. 27 CFR 9.140 - Atlas Peak.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Atlas Peak. 9.140 Section... THE TREASURY LIQUORS AMERICAN VITICULTURAL AREAS Approved American Viticultural Areas § 9.140 Atlas Peak. (a) Name. The name of the viticultural area described in this section is “Atlas Peak.”...

  1. On the trail of double peak hydrographs

    Science.gov (United States)

    Martínez-Carreras, Núria; Hissler, Christophe; Gourdol, Laurent; Klaus, Julian; Juilleret, Jérôme; François Iffly, Jean; McDonnell, Jeffrey J.; Pfister, Laurent

    2016-04-01

    A double peak hydrograph features two peaks as a response to a unique rainfall pulse. The first peak occurs at the same time or shortly after the precipitation has started and it corresponds to a fast catchment response to precipitation. The delayed peak normally starts during the recession of the first peak, when the precipitation has already ceased. Double peak hydrographs may occur for various reasons. They can occur (i) in large catchments when lag times in tributary responses are large, (ii) in urban catchments where the first peak is often caused by direct surface runoff on impervious land cover, and the delayed peak to slower subsurface flow, and (iii) in non-urban catchments, where the first and the delayed discharge peaks are explained by different runoff mechanisms (e.g. overland flow, subsurface flow and/or deep groundwater flow) that have different response times. Here we focus on the third case, as a formal description of the different hydrological mechanisms explaining these complex hydrological dynamics across catchments with diverse physiographic characteristics is still needed. Based on a review of studies documenting double peak events we have established a formal classification of catchments presenting double peak events based on their regolith structure (geological substratum and/or its weathered products). We describe the different hydrological mechanisms that trigger these complex hydrological dynamics across each catchment type. We then use hydrometric time series of precipitation, runoff, soil moisture and groundwater levels collected in the Weierbach (0.46 km2) headwater catchment (Luxembourg) to better understand double peak hydrograph generation. Specifically, we aim to find out (1) if the generation of a double peak hydrograph is a threshold process, (2) if the hysteretic relationships between storage and discharge are consistent during single and double peak hydrographs, and (3) if different functional landscape units (the hillslopes

  2. The geomorphic structure of the runoff peak

    Directory of Open Access Journals (Sweden)

    R. Rigon

    2011-06-01

    Full Text Available This paper develops a theoretical framework to investigate the core dependence of peak flows on the geomorphic properties of river basins. Based on the theory of transport by travel times, and simple hydrodynamic characterization of floods, this new framework invokes the linearity and invariance of the hydrologic response to provide analytical and semi-analytical expressions for peak flow, time to peak, and area contributing to the peak runoff. These results are obtained for the case of constant-intensity hyetograph using the Intensity-Duration-Frequency (IDF curves to estimate extreme flow values as a function of the rainfall return period. Results show that, with constant-intensity hyetographs, the time-to-peak is greater than rainfall duration and usually shorter than the basin concentration time. Moreover, the critical storm duration is shown to be independent of rainfall return period as well as the area contributing to the flow peak. The same results are found when the effects of hydrodynamic dispersion are accounted for. Further, it is shown that, when the effects of hydrodynamic dispersion are negligible, the basin area contributing to the peak discharge does not depend on the channel velocity, but is a geomorphic propriety of the basin. As an example this framework is applied to three watersheds. In particular, the runoff peak, the critical rainfall durations and the time to peak are calculated for all links within a network to assess how they increase with basin area.

  3. [A peak recognition algorithm designed for chromatographic peaks of transformer oil].

    Science.gov (United States)

    Ou, Linjun; Cao, Jian

    2014-09-01

    In the field of the chromatographic peak identification of the transformer oil, the traditional first-order derivative requires slope threshold to achieve peak identification. In terms of its shortcomings of low automation and easy distortion, the first-order derivative method was improved by applying the moving average iterative method and the normalized analysis techniques to identify the peaks. Accurate identification of the chromatographic peaks was realized through using multiple iterations of the moving average of signal curves and square wave curves to determine the optimal value of the normalized peak identification parameters, combined with the absolute peak retention times and peak window. The experimental results show that this algorithm can accurately identify the peaks and is not sensitive to the noise, the chromatographic peak width or the peak shape changes. It has strong adaptability to meet the on-site requirements of online monitoring devices of dissolved gases in transformer oil.

  4. Do dark matter halos explain lensing peaks?

    Science.gov (United States)

    Zorrilla Matilla, José Manuel; Haiman, Zoltán; Hsu, Daniel; Gupta, Arushi; Petri, Andrea

    2016-10-01

    We have investigated a recently proposed halo-based model, Camelus, for predicting weak-lensing peak counts, and compared its results over a collection of 162 cosmologies with those from N-body simulations. While counts from both models agree for peaks with S /N >1 (where S /N is the ratio of the peak height to the r.m.s. shape noise), we find ≈50 % fewer counts for peaks near S /N =0 and significantly higher counts in the negative S /N tail. Adding shape noise reduces the differences to within 20% for all cosmologies. We also found larger covariances that are more sensitive to cosmological parameters. As a result, credibility regions in the {Ωm,σ8} are ≈30 % larger. Even though the credible contours are commensurate, each model draws its predictive power from different types of peaks. Low peaks, especially those with 2 important cosmological information in N-body data, as shown in previous studies, but Camelus constrains cosmology almost exclusively from high significance peaks (S /N >3 ). Our results confirm the importance of using a cosmology-dependent covariance with at least a 14% improvement in parameter constraints. We identified the covariance estimation as the main driver behind differences in inference, and suggest possible ways to make Camelus even more useful as a highly accurate peak count emulator.

  5. Electrocapillary instability of magnetic fluid peak

    CERN Document Server

    Mkrtchyan, Levon; Dikansky, Yuri

    2013-01-01

    The paper presents an experimental study of the capillary electrostatic instability occurring under effect of a constant electric field on a magnetic fluid individual peak. The peaks under study occur at disintegration of a magnetic fluid layer applied on a flat electrode surface under effect of a perpendicular magnetic field. The electrocapillary instability shows itself as an emission of charged drops jets from the peak point in direction of the opposing electrode. The charged drops emission repeats periodically and results in the peak shape pulsations. It is shown that a magnetic field affects the electrocapillary instability occurrence regularities and can stimulate its development. The critical electric and magnetic field strengths at which the instability occurs have been measured; their dependence on the peak size is shown. The hysteresis in the system has been studied; it consists in that the charged drops emission stops at a lesser electric (or magnetic) field strength than that of the initial occurr...

  6. The Origin of Weak Lensing Convergence Peaks

    CERN Document Server

    Liu, Jia

    2016-01-01

    Weak lensing convergence peaks are a promising tool to probe nonlinear structure evolution at late times, providing additional cosmological information beyond second-order statistics. Previous theoretical and observational studies have shown that the cosmological constraints on $\\Omega_m$ and $\\sigma_8$ are improved by a factor of up to ~ 2 when peak counts and second-order statistics are combined, compared to using the latter alone. We study the origin of lensing peaks using observational data from the 154 deg$^2$ Canada-France-Hawaii Telescope Lensing Survey. We found that while high peaks (with height $\\kappa$ >3.5 $\\sigma_\\kappa$, where $\\sigma_\\kappa$ is the r.m.s. of the convergence $\\kappa$) are typically due to one single massive halo of ~$10^{15}M_\\odot$, low peaks ($\\kappa$ ~ their virial radii), compared with ~0.25 virial radii for halos linked with high peaks, hinting that low peaks are more immune to baryonic processes whose impact is confined to the inner regions of the dark matter halos. Our fi...

  7. Peak load arrangements : Assessment of Nordel guidelines

    Energy Technology Data Exchange (ETDEWEB)

    2009-07-01

    Two Nordic countries, Sweden and Finland, have legislation that empowers the TSO to acquire designated peak load resources to mitigate the risk for shortage situations during the winter. In Denmark, the system operator procures resources to maintain a satisfactory level of security of supply. In Norway the TSO has set up a Regulation Power Option Market (RKOM) to secure a satisfactory level of operational reserves at all times, also in winter with high load demand. Only the arrangements in Finland and Sweden fall under the heading of Peak Load Arrangements defined in Nordel Guidelines. NordREG has been invited by the Electricity Market Group (EMG) to evaluate Nordel's proposal for 'Guidelines for transitional Peak Load Arrangements'. The EMG has also financed a study made by EC Group to support NordREG in the evaluation of the proposal. The study has been taken into account in NordREG's evaluation. In parallel to the EMG task, the Swedish regulator, the Energy Markets Inspectorate, has been given the task by the Swedish government to investigate a long term solution of the peak load issue. The Swedish and Finnish TSOs have together with Nord Pool Spot worked on finding a harmonized solution for activation of the peak load reserves in the market. An agreement accepted by the relevant authorities was reached in early January 2009, and the arrangement has been implemented since 19th January 2009. NordREG views that the proposed Nordel guidelines have served as a starting point for the presently agreed procedure. However, NordREG does not see any need to further develop the Nordel guidelines for peak load arrangements. NordREG agrees with Nordel that the market should be designed to solve peak load problems through proper incentives to market players. NordREG presumes that the relevant authorities in each country will take decisions on the need for any peak load arrangement to ensure security of supply. NordREG proposes that such decisions should be

  8. Bayesian peak picking for NMR spectra.

    Science.gov (United States)

    Cheng, Yichen; Gao, Xin; Liang, Faming

    2014-02-01

    Protein structure determination is a very important topic in structural genomics, which helps people to understand varieties of biological functions such as protein-protein interactions, protein-DNA interactions and so on. Nowadays, nuclear magnetic resonance (NMR) has often been used to determine the three-dimensional structures of protein in vivo. This study aims to automate the peak picking step, the most important and tricky step in NMR structure determination. We propose to model the NMR spectrum by a mixture of bivariate Gaussian densities and use the stochastic approximation Monte Carlo algorithm as the computational tool to solve the problem. Under the Bayesian framework, the peak picking problem is casted as a variable selection problem. The proposed method can automatically distinguish true peaks from false ones without preprocessing the data. To the best of our knowledge, this is the first effort in the literature that tackles the peak picking problem for NMR spectrum data using Bayesian method.

  9. Osteoporosis: Peak Bone Mass in Women

    Science.gov (United States)

    ... not supported by your browser. Home Osteoporosis Women Osteoporosis: Peak Bone Mass in Women Publication available in: ... drug products. NIH Pub. No. 15-7891 NIH Osteoporosis and Related Bone Diseases ~ National Resource Center 2 ...

  10. Bayesian Peak Picking for NMR Spectra

    KAUST Repository

    Cheng, Yichen

    2014-02-01

    Protein structure determination is a very important topic in structural genomics, which helps people to understand varieties of biological functions such as protein-protein interactions, protein–DNA interactions and so on. Nowadays, nuclear magnetic resonance (NMR) has often been used to determine the three-dimensional structures of protein in vivo. This study aims to automate the peak picking step, the most important and tricky step in NMR structure determination. We propose to model the NMR spectrum by a mixture of bivariate Gaussian densities and use the stochastic approximation Monte Carlo algorithm as the computational tool to solve the problem. Under the Bayesian framework, the peak picking problem is casted as a variable selection problem. The proposed method can automatically distinguish true peaks from false ones without preprocessing the data. To the best of our knowledge, this is the first effort in the literature that tackles the peak picking problem for NMR spectrum data using Bayesian method.

  11. Amplification of postwildfire peak flow by debris

    Science.gov (United States)

    Kean, J. W.; McGuire, L. A.; Rengers, F. K.; Smith, J. B.; Staley, D. M.

    2016-08-01

    In burned steeplands, the peak depth and discharge of postwildfire runoff can substantially increase from the addition of debris. Yet methods to estimate the increase over water flow are lacking. We quantified the potential amplification of peak stage and discharge using video observations of postwildfire runoff, compiled data on postwildfire peak flow (Qp), and a physically based model. Comparison of flood and debris flow data with similar distributions in drainage area (A) and rainfall intensity (I) showed that the median runoff coefficient (C = Qp/AI) of debris flows is 50 times greater than that of floods. The striking increase in Qp can be explained using a fully predictive model that describes the additional flow resistance caused by the emergence of coarse-grained surge fronts. The model provides estimates of the amplification of peak depth, discharge, and shear stress needed for assessing postwildfire hazards and constraining models of bedrock incision.

  12. Peak Vegetation Growth 2000 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2000 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  13. Peak Vegetation Growth 2004 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2004 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  14. Peak Vegetation Growth 1999 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1999 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  15. Peak Vegetation Growth 1993 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1993 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  16. Peak Vegetation Growth 1994 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1994 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  17. Peak Vegetation Growth 1995 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1995 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  18. Peak Vegetation Growth 1998 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1998 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  19. Peak Vegetation Growth 2001 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2001 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  20. Peak Vegetation Growth 2003 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2003 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  1. Peak Vegetation Growth 1997 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1997 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  2. Peak Vegetation Growth 1990 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1990 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  3. Peak Vegetation Growth 1996 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 1996 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  4. Peak Vegetation Growth 2005 - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer is a grid map of 2005 peak vegetation growth for Alaska and the conterminous United States. The nominal spatial resolution is 1 kilometer and the map...

  5. Tectonics, Climate and Earth's highest peaks

    Science.gov (United States)

    Robl, Jörg; Prasicek, Günther; Hergarten, Stefan

    2016-04-01

    Prominent peaks characterized by high relief and steep slopes are among the most spectacular morphological features on Earth. In collisional orogens they result from the interplay of tectonically driven crustal thickening and climatically induced destruction of overthickened crust by erosional surface processes. The glacial buzz-saw hypothesis proposes a superior status of climate in limiting mountain relief and peak altitude due to glacial erosion. It implies that peak altitude declines with duration of glacial occupation, i.e., towards high latitudes. This is in strong contrast with high peaks existing in high latitude mountain ranges (e.g. Mt. St. Elias range) and the idea of peak uplift due to isostatic compensation of spatially variable erosional unloading an over-thickened orogenic crust. In this study we investigate landscape dissection, crustal thickness and vertical strain rates in tectonically active mountain ranges to evaluate the influence of erosion on (latitudinal) variations in peak altitude. We analyze the spatial distribution of serval thousand prominent peaks on Earth extracted from the global ETOPO1 digital elevation model with a novel numerical tool. We compare this dataset to crustal thickness, thickening rate (vertical strain rate) and mean elevation. We use the ratios of mean elevation to peak elevation (landscape dissection) and peak elevation to crustal thickness (long-term impact of erosion on crustal thickness) as indicators for the influence of erosional surface processes on peak uplift and the vertical strain rate as a proxy for the mechanical state of the orogen. Our analysis reveals that crustal thickness and peak elevation correlate well in orogens that have reached a mechanically limited state (vertical strain rate near zero) where plate convergence is already balanced by lateral extrusion and gravitational collapse and plateaus are formed. On the Tibetan Plateau crustal thickness serves to predict peak elevation up to an altitude

  6. Cosmic Microwave Background Acoustic Peak Locations

    CERN Document Server

    Pan, Zhen; Mulroe, Brigid; Narimani, Ali

    2016-01-01

    The Planck collaboration has measured the temperature and polarization of the cosmic microwave background well enough to determine the locations of eight peaks in the temperature (TT) power spectrum, five peaks in the polarization (EE) power spectrum and twelve extrema in the cross (TE) power spectrum. The relative locations of these extrema give a striking, and beautiful, demonstration of what we expect from acoustic oscillations in the plasma; e.g., that EE peaks fall half way between TT peaks. We expect this because the temperature map is predominantly sourced by temperature variations in the last scattering surface, while the polarization map is predominantly sourced by gradients in the velocity field, and the harmonic oscillations have temperature and velocity 90 degrees out of phase. However, there are large differences in expectations for extrema locations from simple analytic models vs. numerical calculations. Here we quantitatively explore the origin of these differences in gravitational potential tr...

  7. Lidar Observations of Aerosol Disturbances of the Stratosphere over Tomsk (56.5∘N; 85.0∘E in Volcanic Activity Period 2006–2011

    Directory of Open Access Journals (Sweden)

    Oleg E. Bazhenov

    2012-01-01

    Full Text Available The lidar measurements (Tomsk: 56.5∘N; 85.0∘E of the optical characteristics of the stratospheric aerosol layer (SAL in the volcanic activity period 2006–2011 are summarized and analyzed. The background SAL state with minimum aerosol content, observed since 1997 under the conditions of long-term volcanically quiet period, was interrupted in October 2006 by series of explosive eruptions of volcanoes of Pacific Ring of Fire: Rabaul (October 2006, New Guinea; Okmok and Kasatochi (July-August 2008, Aleutian Islands; Redoubt (March-April 2009, Alaska; Sarychev Peak (June 2009, Kuril Islands; Grimsvötn (May 2011, Iceland. A short-term and minor disturbance of the lower stratosphere was also observed in April 2010 after eruption of the Icelandic volcano Eyjafjallajokull. The developed regional empirical model of the vertical distribution of background SAL optical characteristics was used to identify the periods of elevated stratospheric aerosol content after each of the volcanic eruptions. Trends of variations in the total ozone content are also considered.

  8. Do dark matter halos explain lensing peaks?

    CERN Document Server

    Matilla, José Manuel Zorrilla; Hsu, Daniel; Gupta, Arushi; Petri, Andrea

    2016-01-01

    We have investigated a recently proposed halo-based model, Camelus, for predicting weak-lensing peak counts, and compared its results over a collection of 162 cosmologies with those from N-body simulations. While counts from both models agree for peaks with $\\mathcal{S/N}>1$ (where $\\mathcal{S/N}$ is the ratio of the peak height to the r.m.s. shape noise), we find $\\approx 50\\%$ fewer counts for peaks near $\\mathcal{S/N}=0$ and significantly higher counts in the negative $\\mathcal{S/N}$ tail. Adding shape noise reduces the differences to within $20\\%$ for all cosmologies. We also found larger covariances that are more sensitive to cosmological parameters. As a result, credibility regions in the $\\{\\Omega_m, \\sigma_8\\}$ are $\\approx 30\\%$ larger. Even though the credible contours are commensurate, each model draws its predictive power from different types of peaks. Low peaks, especially those with $23)$. Our results confirm the importance of using a cosmology-dependent covariance with at least a 14\\% improveme...

  9. SOME RESULTS OF THE THIRD COMPLEX MULTIDISCIPLINARY EXPEDITION OF THE RUSSIAN GEOGRAPHICAL SOCIETY FOR MONITORING OF THE RADIATION SITUATION IN THE KURIL-KAMCHATKA AREA OF THE PACIFIC OCEAN, 2014

    Directory of Open Access Journals (Sweden)

    A. M. Biblin

    2015-01-01

    Full Text Available The Third complex multidisciplinary expedition of the Russian Geographic Society for monitoring of the radiation situation in the Kuril-Kamchatka area of the Pacific Oceantook place in September – October 2014. The purposes of the expedition were monitoring of the radiation situation and assessment of the impact of the accident at the nuclear power plant “Fukushima-1”on radioactive contamination of the marine environment near the Russian coasts. This paper presents results on the activity measurements of the cesium and strontium radionuclides in the hydrobionts collected during the expedition in the Seas of Japan and Okhotsk. Nine samples of the sea hydrobionts including one species of invertebrates and four species of fish have been analysed. Determination of activity concentrations of radionuclides of cesium (separately 134Cs and 137Cs were carried out by the gammaspectrometry method using a high-resolution semiconductor detector. Activity concentrations of 90Sr were quantified with a radiochemical method. The activity concentrations of 90Sr and the total activity concentrations of both cesium radioisotopes for all the samples analyzed did not exceed 1 Bq kg–1 (wet weight. This value is much lower than the safe levels of 130 Bq kg–1 (radiocesium and 100 Bq kg–1 (radiostrontium for the fish consumption inRussia. The study demonstrates that theFukushima accident has no considerable impact on radioactive contamination of the selected species of hydrobiota in Russian waters of theJapanSea andOkhotskSea.

  10. The PEAK experience in South Carolina

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The PEAK Institute was developed to provide a linkage for formal (schoolteachers) and nonformal educators (extension agents) with agricultural scientists of Clemson University`s South Carolina Agricultural Experiment Station System. The goal of the Institute was to enable teams of educators and researchers to develop and provide PEAK science and math learning experiences related to relevant agricultural and environmental issues of local communities for both classroom and 4-H Club experiences. The Peak Institute was conducted through a twenty day residential Institute held in June for middle school and high school teachers who were teamed with an Extension agent from their community. These educators participated in hands-on, minds-on sessions conducted by agricultural researchers and Clemson University Cooperative Extension specialists. Participants were given the opportunity to see frontier science being conducted by scientists from a variety of agricultural laboratories.

  11. Some Phenomenological Aspects of the Peak Experience

    Science.gov (United States)

    Rosenblatt, Howard S.; Bartlett, Iris

    1976-01-01

    This article relates the psychological dynamics of "peak experiences" to two concepts, intentionality and paradoxical intention, within the philosophical orientation of phenomenology. A review of early philosophical theories of self (Kant and Hume) is presented and compared with the experiential emphasis found in the phenomenology of Husserl.…

  12. Some Phenomenological Aspects of the Peak Experience

    Science.gov (United States)

    Rosenblatt, Howard S.; Bartlett, Iris

    1976-01-01

    This article relates the psychological dynamics of "peak experiences" to two concepts, intentionality and paradoxical intention, within the philosophical orientation of phenomenology. A review of early philosophical theories of self (Kant and Hume) is presented and compared with the experiential emphasis found in the phenomenology of Husserl.…

  13. Real estate price peaks: a comparative overview

    CERN Document Server

    Röhner, B M

    2006-01-01

    First, we emphasize that the real estate price peaks which are currently under way in many industrialized countries (one important exception is Japan) share many of the characteristics of previous historical price peaks. In particular, we show that: (i) In the present episode real price increases are, at least for now, of the same order of magnitude as in previous episodes, typically of the order of 80 percent to 100 percent. (ii) Historically, price peaks turned out to be symmetrical with respect to the peak; soft landing, i.e. an upgoing phase followed by a plateau, has rarely (if ever) been observed. (iii) The inflated demand is mainly boosted by investors and high-income buyers. (iv) In the present as well as in previous episodes, the main engines in the upgoing phase have been the hot markets which developed in major cities such as London, Los Angeles, New York, Paris, San Francisco or Sydney. In our conclusion, we propose a prediction for real estate prices in the West of the United States over the peri...

  14. Spanish Peaks, Sangre de Cristo Range, Colorado

    Science.gov (United States)

    2002-01-01

    The Spanish Peaks, on the eastern flank of the Sangre de Cristo range, abruptly rise 7,000 feet above the western Great Plains. Settlers, treasure hunters, trappers, gold and silver miners have long sighted on these prominent landmarks along the Taos branch of the Santa Fe trail. Well before the westward migration, the mountains figured in the legends and history of the Ute, Apache, Comanche, and earlier tribes. 'Las Cumbres Espanolas' are also mentioned in chronicles of exploration by Spaniards including Ulibarri in 1706 and later by de Anza, who eventually founded San Francisco (California). This exceptional view (STS108-720-32), captured by the crew of Space Shuttle mission STS108, portrays the Spanish Peaks in the context of the southern Rocky Mountains. Uplift of the Sangre de Cristo began about 75 million years ago and produced the long north-trending ridges of faulted and folded rock to the west of the paired peaks. After uplift had ceased (26 to 22 million years ago), the large masses of igneous rock (granite, granodiorite, syenodiorite) that form the Peaks were emplaced (Penn, 1995-2001). East and West Spanish Peaks are 'stocks'-bodies of molten rock that intruded sedimentary layers, cooled and solidified, and were later exposed by erosion. East Peak (E), at 12,708 ft is almost circular and is about 5 1/2 miles long by 3 miles wide, while West Peak (W), at 13,623 ft is roughly 2 3/4 miles long by 1 3/4 miles wide. Great dikes-long stone walls-radiate outward from the mountains like spokes of a wheel, a prominent one forms a broad arc northeast of East Spanish Peak. As the molten rock rose, it forced its way into vertical cracks and joints in the sedimentary strata; the less resistant material was then eroded away, leaving walls of hard rock from 1 foot to 100 feet wide, up to 100 feet high, and as long as 14 miles. Dikes trending almost east-west are also common in the region. For more information visit: Sangres.com: The Spanish Peaks (accessed January 16

  15. Predicting VO2peak from Submaximal- and Peak Exercise Models: The HUNT 3 Fitness Study, Norway.

    Directory of Open Access Journals (Sweden)

    Henrik Loe

    Full Text Available Peak oxygen uptake (VO2peak is seldom assessed in health care settings although being inversely linked to cardiovascular risk and all-cause mortality. The aim of this study was to develop VO2peak prediction models for men and women based on directly measured VO2peak from a large healthy population.VO2peak prediction models based on submaximal- and peak performance treadmill work were derived from multiple regression analysis. 4637 healthy men and women aged 20-90 years were included. Data splitting was used to generate validation and cross-validation samples.The accuracy for the peak performance models were 10.5% (SEE = 4.63 mL⋅kg(-1⋅min(-1 and 11.5% (SEE = 4.11 mL⋅kg(-1⋅min(-1 for men and women, respectively, with 75% and 72% of the variance explained. For the submaximal performance models accuracy were 14.1% (SEE = 6.24 mL⋅kg(-1⋅min(-1 and 14.4% (SEE = 5.17 mL⋅kg(-1⋅min(-1 for men and women, respectively, with 55% and 56% of the variance explained. The validation and cross-validation samples displayed SEE and variance explained in agreement with the total sample. Cross-classification between measured and predicted VO2peak accurately classified 91% of the participants within the correct or nearest quintile of measured VO2peak.Judicious use of the exercise prediction models presented in this study offers valuable information in providing a fairly accurate assessment of VO2peak, which may be beneficial for risk stratification in health care settings.

  16. Effect of gear ratio on peak power and time to peak power in BMX cyclists.

    Science.gov (United States)

    Rylands, Lee P; Roberts, Simon J; Hurst, Howard T

    2017-03-01

    The aim of this study was to ascertain if gear ratio selection would have an effect on peak power and time to peak power production in elite Bicycle Motocross (BMX) cyclists. Eight male elite BMX riders volunteered for the study. Each rider performed three, 10-s maximal sprints on an Olympic standard indoor BMX track. The riders' bicycles were fitted with a portable SRM power meter. Each rider performed the three sprints using gear ratios of 41/16, 43/16 and 45/16 tooth. The results from the 41/16 and 45/16 gear ratios were compared to the current standard 43/16 gear ratio. Statistically, significant differences were found between the gear ratios for peak power (F(2,14) = 6.448; p = .010) and peak torque (F(2,14) = 4.777; p = .026), but no significant difference was found for time to peak power (F(2,14) = 0.200; p = .821). When comparing gear ratios, the results showed a 45/16 gear ratio elicited the highest peak power,1658 ± 221 W, compared to 1436 ± 129 W and 1380 ± 56 W, for the 43/16 and 41/16 ratios, respectively. The time to peak power showed a 41/16 tooth gear ratio attained peak power in -0.01 s and a 45/16 in 0.22 s compared to the 43/16. The findings of this study suggest that gear ratio choice has a significant effect on peak power production, though time to peak power output is not significantly affected. Therefore, selecting a higher gear ratio results in riders attaining higher power outputs without reducing their start time.

  17. The Doppler peaks from a generic defect

    CERN Document Server

    Magueijo, J

    1996-01-01

    We investigate which of the exotic Doppler peak features found for textures and cosmic strings are generic novelties pertaining to defects. We find that the ``out of phase'' texture signature is an accident. Generic defects, when they generate a secondary peak structure similar to inflation, apply to it an additive shift. It is not necessary for this shift to be ``out of phase''. We also show which factors are responsible for the absence of secondary oscillations found for cosmic strings. Within this general analysis we finally consider the conditions under which topological defects and inflation can be confused. It is argued that only \\Omega=1 inflation and a defect with a horizon size coherence length have a chance to be confused. Any other inflationary or defect model always differ distinctly. (To appear in the proceedings of the XXXIth Moriond meeting, ``Microwave Background Anisotropies'')

  18. Solar Cycle 24: is the peak coming?

    CERN Document Server

    Sello, Stefano

    2012-01-01

    Solar cycle activity forecasting, mainly its magnitude and timing, is an essential issue for numerous scientific and technological applications: in fact, during an active solar period, many strong eruptions occur on the Sun with increasing frequency, such as flares, coronal mass ejections, high velocity solar wind photons and particles, which can severely affect the Earth's ionosphere and the geomagnetic field, with impacts on the low atmosphere. Thus it is very important to develop reliable solar cycle prediction methods for the incoming solar activity. The current solar cycle 24 appeared unusual from many points of view: an unusually extended minimum period, and a global low activity compared to those of the previous three or four cycles. Currently, there are many different evidences that the peak in the northern hemisphere already occurred at 2011.6 but not yet in the southern hemisphere. In this brief note we update the peak prediction and its timing, based on the most recent observations.

  19. Peak oil, food systems, and public health.

    Science.gov (United States)

    Neff, Roni A; Parker, Cindy L; Kirschenmann, Frederick L; Tinch, Jennifer; Lawrence, Robert S

    2011-09-01

    Peak oil is the phenomenon whereby global oil supplies will peak, then decline, with extraction growing increasingly costly. Today's globalized industrial food system depends on oil for fueling farm machinery, producing pesticides, and transporting goods. Biofuels production links oil prices to food prices. We examined food system vulnerability to rising oil prices and the public health consequences. In the short term, high food prices harm food security and equity. Over time, high prices will force the entire food system to adapt. Strong preparation and advance investment may mitigate the extent of dislocation and hunger. Certain social and policy changes could smooth adaptation; public health has an essential role in promoting a proactive, smart, and equitable transition that increases resilience and enables adequate food for all.

  20. Excursion set peaks: the role of shear

    CERN Document Server

    Castorina, Emanuele; Hahn, Oliver; Sheth, Ravi K

    2016-01-01

    Recent analytical work on the modelling of dark halo abundances and clustering has demonstrated the advantages of combining the excursion set approach with peaks theory. We extend these ideas and introduce a model of excursion set peaks that incorporates the role of initial tidal effects or shear in determining the gravitational collapse of dark haloes. The model -- in which the critical density threshold for collapse depends on the tidal influences acting on protohaloes -- is well motivated from ellipsoidal collapse arguments and is also simple enough to be analytically tractable. We show that the predictions of this model are in very good agreement with measurements of the halo mass function and traditional scale dependent halo bias in N-body simulations across a wide range of masses and redshift. The presence of shear in the collapse threshold means that halo bias is naturally predicted to be nonlocal, and that protohalo densities at fixed mass are naturally predicted to have Lognormal-like distributions. ...

  1. Reducing Peak Power in Automated Weapon Laying

    Science.gov (United States)

    2016-02-01

    The values used are determined based on a number of factors including available power, maximum motor speed , maximum safe slewing speeds , peak...METHODS, ASSUMPTIONS, AND PROCEDURES Conventions and Variable Definitions Before describing the formulas to solve the aforementioned problems, it is...These two formulas are set equal to each other in equation 9 and then solved for t2 in equation 10. Note that the negative value of α2 results in a

  2. Hanford Site peak gust wind speeds

    Energy Technology Data Exchange (ETDEWEB)

    Ramsdell, J.V.

    1998-09-29

    Peak gust wind data collected at the Hanford Site since 1945 are analyzed to estimate maximum wind speeds for use in structural design. The results are compared with design wind speeds proposed for the Hanford Site. These comparisons indicate that design wind speeds contained in a January 1998 advisory changing DOE-STD-1020-94 are excessive for the Hanford Site and that the design wind speeds in effect prior to the changes are still appropriate for the Hanford Site.

  3. METing SUSY on the Z peak

    Energy Technology Data Exchange (ETDEWEB)

    Barenboim, G.; Bernabeu, J.; Vives, O. [Universitat de Valencia, Departament de Fisica Teorica, Burjassot (Spain); Universitat de Valencia-CSIC, Parc Cientific U.V., IFIC, Paterna (Spain); Mitsou, V.A.; Romero, E. [Universitat de Valencia-CSIC, Parc Cientific U.V., IFIC, Paterna (Spain)

    2016-02-15

    Recently the ATLAS experiment announced a 3 σ excess at the Z-peak consisting of 29 pairs of leptons together with two or more jets, E{sub T}{sup miss} > 225 GeV and HT > 600 GeV, to be compared with 10.6 ± 3.2 expected lepton pairs in the Standard Model. No excess outside the Z-peak was observed. By trying to explain this signal with SUSY we find that only relatively light gluinos, m{sub g} or similar 400 GeV decaying predominantly to Z-boson plus a light gravitino, such that nearly every gluino produces at least one Z-boson in its decay chain, could reproduce the excess. We construct an explicit general gauge mediation model able to reproduce the observed signal overcoming all the experimental limits. Needless to say, more sophisticated models could also reproduce the signal, however, any model would have to exhibit the following features: light gluinos, or heavy particles with a strong production cross section, producing at least one Z-boson in its decay chain. The implications of our findings for the Run II at LHC with the scaling on the Z peak, as well as for the direct search of gluinos and other SUSY particles, are pointed out. (orig.)

  4. Distribution of bivalve mollusks Macoma golikovi Scarlato and Kafanov, 1988 and Macoma calcarea (Gmelin, 1791) in the shallow-water hydrothermal ecosystem of Kraternaya Bight (Yankich Island, Kuril Islands): connection with feeding type and hydrothermal activity of Ushishir Volcano

    Science.gov (United States)

    Kamenev, G. M.; Kavun, V. Ya; Tarasov, V. G.; Fadeev, V. I.

    2004-01-01

    Kraternaya Bight (Yankich Island, the Kuril Islands) is a submerged crater of the active Ushishir Volcano characterized by terrestrial and underwater gasohydrothermal activity. The gasohydrothermal activity of the volcano produces a great influence on the physico-chemical characteristics of water column, as well as planktonic and bottom communities of marine organisms of the bight. The bivalve mollusks Macoma golikovi and Macoma calcarea are dominant macrobenthos species of Kraternaya Bight, which inhabit all the zones of underwater volcanic activity. Macoma golikovi occurs at a depth of 1-45 m. This species forms the densest aggregations (with an average biomass of 500-800 g m -2 and a population density of 500-700 ind. m -2) at a depth of 3-15 m, on steep underwater crater slopes (40-45°), on slightly silted gravel. The majority of gasohydrothermal vents are located at that depth. Macoma calcarea occurs at a depth of 5-55 m. In contrast to Macoma golikovi, this species is dominant at a depth of 25-40 m, on gentle slopes of the crater (to 20°), on silt and silty sand. That depth is less subjected to the influence of volcanic products. Its average biomass is 450-750 g m -2 with a population density of 200-450 ind. m -2 there. It is assumed that the differences in the distribution are due the fact that Macoma golikovi is mainly a suspension-feeder in Kraternaya Bight, and Macoma calcarea is a deposit-feeder. The studies conducted between 1987 and 1997 on the quantitative distribution of Macoma golikovi and Macoma calcarea in four areas of the bight, which had different intensity, temperature and chemical composition of gasohydrothermal vents and volcanic water seeping showed that both species formed settlements with lesser density in the area of the gasohydrothermal vents containing hydrogen sulfide. Beyond the area of volcanic activity, these species were most abundant. In 1993 and 1995, the mortality of the populations of the bivalve mollusks was observed in the

  5. Will peak oil accelerate carbon dioxide emissions?

    Science.gov (United States)

    Caldeira, K.; Davis, S. J.; Cao, L.

    2008-12-01

    The relative scarcity of oil suggests that oil production is peaking and will decline thereafter. Some have suggested that this represents an opportunity to reduce carbon dioxide emissions. However, in the absence of constraints on carbon dioxide emission, "peak oil" may drive a shift towards increased reliance on coal as a primary energy source. Because coal per unit energy, in the absence of carbon capture and disposal, releases more carbon dioxide to the atmosphere than oil, "peak oil" may lead to an acceleration of carbon dioxide emissions. We will never run out of oil. As oil becomes increasingly scarce, prices will rise and therefore consumption will diminish. As prices rise, other primary energy sources will become increasingly competitive with oil. The developed world uses oil primarily as a source of transportation fuels. The developing world uses oil primarily for heat and power, but the trend is towards increasing reliance on oil for transportation. Liquid fuels, including petroleum derivatives such as gasoline and diesel fuel, are attractive as transportation fuels because of their relative abundance of energy per unit mass and volume. Such considerations are especially important for the air transport industry. Today, there is little that can compete with petroleum-derived transportation fuels. Future CO2 emissions from the transportation sector largely depend on what replaces oil as a source of fuel. Some have suggested that biomass-derived ethanol, hydrogen, or electricity could play this role. Each of these potential substitutes has its own drawbacks (e.g., low power density per unit area in the case of biomass, low power density per unit volume in the case of hydrogen, and low power density per unit mass in the case of battery storage). Thus, it is entirely likely that liquefaction of coal could become the primary means by which transportation fuels are produced. Since the burning of coal produces more CO2 per unit energy than does the burning of

  6. Effect of Rainfall on Traffic Stream Characteristics during Peak and Non-Peak Periods

    Directory of Open Access Journals (Sweden)

    Hashim Mohammed Alhassan

    2012-01-01

    Full Text Available This paper examined the effect of rainfall on traffic stream behaviour during  peak and non-peak periods on a basic highway section. Data on this section which is located on the J5 was collected for four months during which 99 rainfall events occurred. The traffic consisted of 75.80% cars, 10.23% motorcycles, 3.51% trucks and 10.46%  of other vehicles. Traffic was observed for both rain and no-rain conditions and the data was analysed to see the effect of the rain. The results showed decreases in the speed as the rain intensity increased. Similarly, the traffic flow rates decreased as the rain intensity increased. This trend was observed for both peak and non-peak periods and for both directions. It is concluded that the effect of rain during peak period could have more serious consequences on the traffic flow than during non-peak periods because of the higher flow rates and the constrained nature of the flow. Consequently, capacity degradations up to 30% during peak periods would require resources to be employed to manage the traffic.

  7. Electromechanical Peak Devices of Distributed Power Generation

    Directory of Open Access Journals (Sweden)

    S. V. Konstantinova

    2011-01-01

    Full Text Available The power world crises (1973, 1979 have demonstrated that mankind entered the expensive energy epoch. More and more attitude is given to power saving problem by including renewable power sources in energy balance of the countries. The paper analyzes a power system inBelarusand a typical chart of the active load is cited in the paper. Equalization of load chart is considered as one of measures directed on provision of higher operational efficiency of power system and power saving.  This purpose can be obtained while including electromechanical peak devices of the distributed generation in the energy balance.

  8. LARAMIE PEAK WILDERNESS STUDY AREA, WYOMING.

    Science.gov (United States)

    Segerstrom, Kenneth; Weisner, R.C.

    1984-01-01

    On the basis of a mineral survey, most of the Laramie Peak Wilderness study area in Wyoming was concluded to have little promise for the occurrence of mineral or energy resources. Only three small areas in the northern part, one extending outside the study area to Esterbrook, were found to have probable mineral-resource potential for copper and lead. The geologic setting precludes the presence of fossil-fuel resources in the study area. There are no surface indications that geothermal energy could be developed within or near the study area.

  9. Forecasting peaks of seasonal influenza epidemics.

    Science.gov (United States)

    Nsoesie, Elaine; Mararthe, Madhav; Brownstein, John

    2013-06-21

    We present a framework for near real-time forecast of influenza epidemics using a simulation optimization approach. The method combines an individual-based model and a simple root finding optimization method for parameter estimation and forecasting. In this study, retrospective forecasts were generated for seasonal influenza epidemics using web-based estimates of influenza activity from Google Flu Trends for 2004-2005, 2007-2008 and 2012-2013 flu seasons. In some cases, the peak could be forecasted 5-6 weeks ahead. This study adds to existing resources for influenza forecasting and the proposed method can be used in conjunction with other approaches in an ensemble framework.

  10. Peak oil, economic growth, and wildlife conservation

    CERN Document Server

    Gates, J Edward; Czech, Brian

    2014-01-01

    The proposed book focuses on one of the most important issues affecting humankind in this century - Peak Oil or the declining availability of abundant, cheap energy-and its effects on our industrialized economy and wildlife conservation. Energy will be one of the defining issues of the 21st Century directly affecting wildlife conservation wherever energy extraction is a primary economic activity and indirectly through deepening economic recessions. Since cheap, abundant energy has been at the core of our industrial society, and has resulted in the technological advancements we enjoy today, the

  11. Particle creation by peak electric field

    CERN Document Server

    Adorno, T C; Gitman, D M

    2016-01-01

    The particle creation by the so-called peak electric field is considered. The latter field is a combination of two exponential parts, one exponentially-increasing and another exponentially-decreasing. We find exact solutions of the Dirac equation with the field under consideration with appropriate asymptotic conditions and calculate all the characteristics of particle creation effect, in particular, differential mean numbers of created particle, total number of created particles, and the probability for a vacuum to remain a vacuum. Characteristic asymptotic regimes are discussed in detail and a comparison with the pure asymptotically decaying field is considered.

  12. Particle creation by peak electric field

    Energy Technology Data Exchange (ETDEWEB)

    Adorno, T.C. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); Gavrilov, S.P. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); Herzen State Pedagogical University of Russia, Department of General and Experimental Physics, St. Petersburg (Russian Federation); Gitman, D.M. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); P. N. Lebedev Physical Institute, Moscow (Russian Federation); University of Sao Paulo, Institute of Physics, CP 66318, Sao Paulo, SP (Brazil)

    2016-08-15

    The particle creation by the so-called peak electric field is considered. The latter field is a combination of two exponential parts, one exponentially increasing and another exponentially decreasing. We find exact solutions of the Dirac equation with the field under consideration with appropriate asymptotic conditions and calculate all the characteristics of particle creation effect, in particular, differential mean numbers of created particle, total number of created particles, and the probability for a vacuum to remain a vacuum. Characteristic asymptotic regimes are discussed in detail and a comparison with the pure asymptotically decaying field is considered. (orig.)

  13. Beyond the Peak - Tactile Temporal Discrimination Does Not Correlate with Individual Peak Frequencies in Somatosensory Cortex.

    Science.gov (United States)

    Baumgarten, Thomas J; Schnitzler, Alfons; Lange, Joachim

    2017-01-01

    The human sensory systems constantly receive input from different stimuli. Whether these stimuli are integrated into a coherent percept or segregated and perceived as separate events, is critically determined by the temporal distance of the stimuli. This temporal distance has prompted the concept of temporal integration windows or perceptual cycles. Although this concept has gained considerable support, the neuronal correlates are still discussed. Studies suggested that neuronal oscillations might provide a neuronal basis for such perceptual cycles, i.e., the cycle lengths of alpha oscillations in visual cortex and beta oscillations in somatosensory cortex might determine the length of perceptual cycles. Specifically, recent studies reported that the peak frequency (the frequency with the highest spectral power) of alpha oscillations in visual cortex correlates with subjects' ability to discriminate two visual stimuli. In the present study, we investigated whether peak frequencies in somatosensory cortex might serve as the correlate of perceptual cycles in tactile discrimination. Despite several different approaches, we were unable to find a significant correlation between individual peak frequencies in the alpha- and beta-band and individual discrimination abilities. In addition, analysis of Bayes factor provided evidence that peak frequencies and discrimination thresholds are unrelated. The results suggest that perceptual cycles in the somatosensory domain are not necessarily to be found in the peak frequency, but in other frequencies. We argue that studies based solely on analysis of peak frequencies might thus miss relevant information.

  14. PeakVizor: Visual Analytics of Peaks in Video Clickstreams from Massive Open Online Courses.

    Science.gov (United States)

    Chen, Qing; Chen, Yuanzhe; Liu, Dongyu; Shi, Conglei; Wu, Yingcai; Qu, Huamin

    2016-10-01

    Massive open online courses (MOOCs) aim to facilitate open-access and massive-participation education. These courses have attracted millions of learners recently. At present, most MOOC platforms record the web log data of learner interactions with course videos. Such large amounts of multivariate data pose a new challenge in terms of analyzing online learning behaviors. Previous studies have mainly focused on the aggregate behaviors of learners from a summative view; however, few attempts have been made to conduct a detailed analysis of such behaviors. To determine complex learning patterns in MOOC video interactions, this paper introduces a comprehensive visualization system called PeakVizor. This system enables course instructors and education experts to analyze the "peaks" or the video segments that generate numerous clickstreams. The system features three views at different levels: the overview with glyphs to display valuable statistics regarding the peaks detected; the flow view to present spatio-temporal information regarding the peaks; and the correlation view to show the correlation between different learner groups and the peaks. Case studies and interviews conducted with domain experts have demonstrated the usefulness and effectiveness of PeakVizor, and new findings about learning behaviors in MOOC platforms have been reported.

  15. Peak heart rates at extreme altitudes

    DEFF Research Database (Denmark)

    Lundby, C; Van Hall, Gerrit

    2001-01-01

    We have measured maximal heart rate during a graded maximal bicycle exercise test to exhaustion in five healthy climbers before and during an expedition to Mt. Everest. Maximal heart rates at sea level were 186 (177-204) beats/min(-1) at sea level and 170 (169-182) beats/min(-1) with acute hypoxia....... After 1, 4 and 6 weeks of acclimatization to 5400 m, maximal heart rates were 155 (135-182), 158 (144-182), and 155 (140-183) beats/min(-1), respectively. Heart rates of two of the climbers were measured during their attempt to reach the summit of Mt. Everest without the use of supplemental oxygen....... The peak heart rates at 8,750 m for the two climbers were 142 and 144 beats/min(-1), which were similar to their maximal heart rates during exhaustive bicycle exercise at 5,400 m, the values being 144 and 148 beats/min(-1), respectively. The peak heart rates at 8,750 m are in agreement with other field...

  16. Equivalence Principle and the Baryon Acoustic Peak

    CERN Document Server

    Baldauf, Tobias; Simonović, Marko; Zaldarriaga, Matias

    2015-01-01

    We study the dominant effect of a long wavelength density perturbation $\\delta(\\lambda_L)$ on short distance physics. In the non-relativistic limit, the result is a uniform acceleration, fixed by the equivalence principle, and typically has no effect on statistical averages due to translational invariance. This same reasoning has been formalized to obtain a "consistency condition" on the cosmological correlation functions. In the presence of a feature, such as the acoustic peak at $l_{\\rm BAO}$, this naive expectation breaks down for $\\lambda_Lpeak, and is calculable to all orders in the long modes. This can be used to improve the result of perturbative calculations - a technique known as "infra-red resummation"- and is explicitly applied to the one-loop calculation of power spectrum. Finally, the success of BAO reconstruction schemes is argue...

  17. Microwave peak absorption frequency of liquid

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Microwave-assisted extraction is a new effective method which has practical ap-plications in many fields. Microwave heating is one of its physical mechanisms,and it also has the characteristic of selectivity. When the applied microwave fre-quency equals a certain absorption frequency of the material (or specific compo-nent),the material will intensively absorb microwave energy. This is also known as resonant absorption,and the frequency is called the peak absorption frequency which depends on the physical structure of the material. In this work,dynamic hy-drogen bond energy was included in molecular activation energy; with the liquid cell model,the expression of interaction energy between dipolar molecules was derived. The rotational relaxation time was gotten from the Eyring viscosity formula. Then based on the relationship between dielectric dissipation coefficient and re-laxation time,the expression of microwave peak absorption frequency as a func-tion of the material physical structure,rotational inertia and electrical dipole mo-ment of molecules was established. These theoretical formulas were applied to water and benzene,and the calculated results agree fairly well with the experi-mental data. This work can not only deepen the study of the interaction between microwave and material,but also provide a possible guide for the experiment of microwave-assisted extraction.

  18. Microwave peak absorption frequency of liquid

    Institute of Scientific and Technical Information of China (English)

    HAN GuangZe; CHEN MingDong

    2008-01-01

    Microwave-assisted extraction is a new effective method which has practical ap-plications in many fields. Microwave heating is one of its physical mechanisms, and it also has the characteristic of selectivity. When the applied microwave fre-quency equals a certain absorption frequency of the material (or specific compo-nent), the material will intensively absorb microwave energy. This is also known as resonant absorption, and the frequency is called the peak absorption frequency which depends on the physical structure of the material. In this work, dynamic hy-drogen bond energy was included in molecular activation energy; with the liquid cell model, the expression of interaction energy between dipolar molecules was derived. The rotational relaxation time was gotten from the Eyring viscosity formula. Then based on the relationship between dielectric dissipation coefficient and re-laxation time, the expression of microwave peak absorption frequency as a func-tion of the material physical structure, rotational inertia and electrical dipole mo-ment of molecules was established. These theoretical formulas were applied to water and benzene, and the calculated results agree fairly well with the experi-mental data. This work can not only deepen the study of the interaction between microwave and material, but also provide a possible guide for the experiment of microwave-assisted extraction.

  19. Method and apparatus for current-output peak detection

    Energy Technology Data Exchange (ETDEWEB)

    De Geronimo, Gianluigi

    2017-01-24

    A method and apparatus for a current-output peak detector. A current-output peak detector circuit is disclosed and works in two phases. The peak detector circuit includes switches to switch the peak detector circuit from the first phase to the second phase upon detection of the peak voltage of an input voltage signal. The peak detector generates a current output with a high degree of accuracy in the second phase.

  20. , Recorded at Ladron Peak, Central New Mexico

    Science.gov (United States)

    Ricketts, J. W.; Kelley, S.; Read, A. S.; Karlstrom, K. E.

    2010-12-01

    Ladron Peak, situated on the western flank of the Rio Grande rift ~30 miles NW of Socorro, NM, is composed of Precambrian granitic and metamorphic assemblages that have been faulted and uplifted during the late Tertiary formation of the rift. The area is bounded on three sides by normal faults, including the anomalously low-angle (~26°) Jeter fault to the east, which places Precambrian rocks in the footwall against Paleozoic and Mesozoic fault slivers, and mainly Cenozoic Santa Fe Group basin fill in the hanging wall. New apatite fission track (AFT) thermochronological data collected at 22 locations along the NE and SE margins of Ladron Peak give a range of ages from 10.9 ± 1.9 to 20.4 ± 8.6 Ma. Samples within the footwall include granitic and metasedimentary rocks that have mean track lengths of 13.1 to 14.1 μm; one quartzite sample has a mean track length of 12.5 μm, suggesting time in the partial annealing zone. Within the hanging wall block, new AFT ages from the Permian Bursum and Abo Formations give cooling ages of 23.1 ± 3.3 Ma. and 59.9 ± 12.4 Ma., respectively. The Bursum Formation sample, with a track length of 13.7 μm, cooled below the 110°C isotherm during the Miocene, while the Abo Formation sample, with a track length of 11.2 μm, was only partially reset prior to rift-related deformation. Mylonitized granitic and metamorphic rocks in the immediate footwall preserve dip-slip lineations that are parallel to slip on the Jeter fault. This suggests that strain associated with exhumation was recorded by both brittle and ductile deformation. Although this type of deformation is common within metamorphic core complexes in highly extended terranes, ductile normal faulting has not been recognized within the Rio Grande rift in New Mexico, though there is some suggestion of ductile deformation around Blanca Peak in the San Luis Valley in Colorado. These observations imply one or both of the following: (1) Ductile deformation at Ladron Peak was

  1. Peak Wind Tool for General Forecasting

    Science.gov (United States)

    Barrett, Joe H., III

    2010-01-01

    The expected peak wind speed of the day is an important forecast element in the 45th Weather Squadron's (45 WS) daily 24-Hour and Weekly Planning Forecasts. The forecasts are used for ground and space launch operations at the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45 WS also issues wind advisories for KSC/CCAFS when they expect wind gusts to meet or exceed 25 kt, 35 kt and 50 kt thresholds at any level from the surface to 300 ft. The 45 WS forecasters have indicated peak wind speeds are challenging to forecast, particularly in the cool season months of October - April. In Phase I of this task, the Applied Meteorology Unit (AMU) developed a tool to help the 45 WS forecast non-convective winds at KSC/CCAFS for the 24-hour period of 0800 to 0800 local time. The tool was delivered as a Microsoft Excel graphical user interface (GUI). The GUI displayed the forecast of peak wind speed, 5-minute average wind speed at the time of the peak wind, timing of the peak wind and probability the peak speed would meet or exceed 25 kt, 35 kt and 50 kt. For the current task (Phase II ), the 45 WS requested additional observations be used for the creation of the forecast equations by expanding the period of record (POR). Additional parameters were evaluated as predictors, including wind speeds between 500 ft and 3000 ft, static stability classification, Bulk Richardson Number, mixing depth, vertical wind shear, temperature inversion strength and depth and wind direction. Using a verification data set, the AMU compared the performance of the Phase I and II prediction methods. Just as in Phase I, the tool was delivered as a Microsoft Excel GUI. The 45 WS requested the tool also be available in the Meteorological Interactive Data Display System (MIDDS). The AMU first expanded the POR by two years by adding tower observations, surface observations and CCAFS (XMR) soundings for the cool season months of March 2007 to April 2009. The POR was expanded

  2. Peak Electric Load Relief in Northern Manhattan

    Directory of Open Access Journals (Sweden)

    Hildegaard D. Link

    2014-08-01

    Full Text Available The aphorism “Think globally, act locally,” attributed to René Dubos, reflects the vision that the solution to global environmental problems must begin with efforts within our communities. PlaNYC 2030, the New York City sustainability plan, is the starting point for this study. Results include (a a case study based on the City College of New York (CCNY energy audit, in which we model the impacts of green roofs on campus energy demand and (b a case study of energy use at the neighborhood scale. We find that reducing the urban heat island effect can reduce building cooling requirements, peak electricity loads stress on the local electricity grid and improve urban livability.

  3. Tim Peake and Britain's road to space

    CERN Document Server

    Seedhouse, Erik

    2017-01-01

    This book puts the reader in the flight suit of Britain’s first male astronaut, Tim Peake. It chronicles his life, along with the Principia mission and the down-to-the-last-bolt descriptions of life aboard the ISS, by way of the hurdles placed by the British government and the rigors of training at Russia’s Star City military base. In addition, this book discusses the learning curves required in astronaut and mission training and the complexity of the technologies required to launch an astronaut and keep them alive for months on end. This book underscores the fact that technology and training, unlike space, do not exist in a vacuum; complex technical systems, like the ISS, interact with the variables of human personality, and the cultural background of the astronauts. .

  4. Peak, multi-peak and broadband absorption in graphene-based one-dimensional photonic crystal

    Science.gov (United States)

    Miloua, R.; Kebbab, Z.; Chiker, F.; Khadraoui, M.; Sahraoui, K.; Bouzidi, A.; Medles, M.; Mathieu, C.; Benramdane, N.

    2014-11-01

    We theoretically investigate the possibility of enhancing light absorption in graphene-based one dimensional photonic crystal. We demonstrate that it is possible to achieve total light absorption at technologically important wavelengths using one-dimensional graphene-based photonic crystals. By means of the transfer matrix method, we investigate the effect of refractive indices and layer numbers on the optical response of the structure. We found that it is possible to achieve one peak, multi-peak or broadband, and complete optical absorption. As a result, the proposed photonic structures enable myriad potential applications such as photodetection, shielding and optical sensing.

  5. Norwegian hydropower a valuable peak power source

    Energy Technology Data Exchange (ETDEWEB)

    Brekke, Hermod

    2010-07-01

    given on a possible increase of the Norwegian hydropower peak power production to meet the growing the European demand for peak power caused by the growing non stationary production from wind mills and ocean energy from waves and sea current. Also building of reversible pump turbine power plants will be discussed even if approximately 10% power will be consumed by loss in the pumping phase compared to direct use of the water from reservoirs. (Author)

  6. Peak-valley-peak pattern of histone modifications delineates active regulatory elements and their directionality

    DEFF Research Database (Denmark)

    Pundhir, Sachin; Bagger, Frederik Otzen; Lauridsen, Felicia Kathrine Bratt

    2016-01-01

    Formation of nucleosome free region (NFR) accompanied by specific histone modifications at flanking nucleosomes is an important prerequisite for enhancer and promoter activity. Due to this process, active regulatory elements often exhibit a distinct shape of histone signal in the form of a peak...

  7. Peak phosphorus - peak food? The need to close the phosphorus cycle.

    Science.gov (United States)

    Rhodes, Christopher J

    2013-01-01

    The peak in the world production of phosphorus has been predicted to occur in 2033, based on world reserves of rock phosphate (URR) reckoned at around 24,000 million tonnes (Mt), with around 18,000 Mt remaining. This figure was reckoned-up to 71,000 Mt, by the USGS, in 2012, but a production maximum during the present century is still highly probable. There are complex issues over what the demand will be for phosphorus in the future, as measured against a rising population (from 7 billion to over 9 billion in 2050), and a greater per capita demand for fertiliser to grow more grain, in part to feed animals and meet a rising demand for meat by a human species that is not merely more populous but more affluent. As a counterweight to this, we may expect that greater efficiencies in the use of phosphorus - including recycling from farms and of human and animal waste - will reduce the per capita demand for phosphate rock. The unseen game changer is peak oil, since phosphate is mined and recovered using machinery powered by liquid fuels refined from crude oil. Hence, peak oil and peak phosphorus might appear as conjoined twins. There is no unequivocal case that we can afford to ignore the likelihood of a supply-demand gap for phosphorus occurring sometime this century, and it would be perilous to do so.

  8. Analysis of the Peak Resistance Frequency Method.

    Science.gov (United States)

    Wang, Boshuo; Weiland, James D

    2016-10-01

    This study analyzes the peak resistance frequency (PRF) method described by Mercanzini et al., a method that can easily extract the tissue resistance from impedance spectroscopy for many neural engineering applications but has no analytical description thus far. Mathematical analyses and computer simulations were used to explore underlying principles, accuracy, and limitations of the PRF method. The mathematical analyses demonstrated that the PRF method has an inherent but correctable deviation dependent on the idealness of the electrode-tissue interface, which is validated by simulations. Further simulations show that both frequency sampling and noise affect the accuracy of the PRF method, and in general, it performs less accurately than least squares methods. However, the PRF method achieves simplicity and reduced measurement and computation time at the expense of accuracy. From the qualitative results, the PRF method can work with reasonable precision and simplicity, although its limitation and the idealness of the electrode-tissue interface involved should be taken into consideration. This paper provides a mathematical foundation for the PRF method and its practical implementation.

  9. Z-peaked excess in goldstini scenarios

    CERN Document Server

    Liew, Seng Pei; Mawatari, Kentarou; Sakurai, Kazuki; Vereecken, Matthias

    2015-01-01

    We study a possible explanation of a 3.0 $\\sigma$ excess recently reported by the ATLAS Collaboration in events with Z-peaked same-flavour opposite-sign lepton pair, jets and large missing transverse momentum in the context of gauge-mediated SUSY breaking with more than one hidden sector, the so-called goldstini scenario. In a certain parameter space, the gluino two-body decay chain $\\tilde g\\to g\\tilde\\chi^0_{1,2}\\to gZ\\tilde G'$ becomes dominant, where $\\tilde\\chi^0_{1,2}$ and $\\tilde G'$ are the Higgsino-like neutralino and the massive pseudo-goldstino, respectively, and gluino pair production can contribute to the signal. We find that a mass spectrum such as $m_{\\tilde g}\\sim 900$ GeV, $m_{\\tilde\\chi^0_{1,2}}\\sim 700$ GeV and $m_{\\tilde G'}\\sim 600$ GeV demonstrates the rate and the distributions of the excess, without conflicting with the stringent constraints from jets plus missing energy analyses and with the CMS constraint on the identical final state.

  10. Z-peaked excess in goldstini scenarios

    Directory of Open Access Journals (Sweden)

    Seng Pei Liew

    2015-11-01

    Full Text Available We study a possible explanation of a 3.0 σ excess recently reported by the ATLAS Collaboration in events with Z-peaked same-flavour opposite-sign lepton pair, jets and large missing transverse momentum in the context of gauge-mediated SUSY breaking with more than one hidden sector, the so-called goldstini scenario. In a certain parameter space, the gluino two-body decay chain g˜→gχ˜1,20→gZG˜′ becomes dominant, where χ˜1,20 and G˜′ are the Higgsino-like neutralino and the massive pseudo-goldstino, respectively, and gluino pair production can contribute to the signal. We find that a mass spectrum such as mg˜∼1000 GeV, mχ˜1,20∼800 GeV and mG˜′∼600 GeV demonstrates the rate and the distributions of the excess, without conflicting with the stringent constraints from jets plus missing energy analyses and with the CMS constraint on the identical final state.

  11. Asymmetry parameter of peaked Fano line shapes

    Science.gov (United States)

    Meierott, S.; Hotz, T.; Néel, N.; Kröger, J.

    2016-10-01

    The spectroscopic line shape of electronic and vibrational excitations is ubiquitously described by a Fano profile. In the case of nearly symmetric and peaked Fano line shapes, the fit of the conventional Fano function to experimental data leads to difficulties in unambiguously extracting the asymmetry parameter, which may vary over orders of magnitude without degrading the quality of the fit. Moreover, the extracted asymmetry parameter depends on initially guessed values. Using the spectroscopic signature of the single-Co Kondo effect on Au(110) the ambiguity of the extracted asymmetry parameter is traced to the highly symmetric resonance profile combined with the inevitable scattering of experimental data. An improved parameterization of the conventional Fano function is suggested that enables the nonlinear optimization in a reduced parameter space. In addition, the presence of a global minimum in the sum of squared residuals and thus the independence of start parameters may conveniently be identified in a two-dimensional plot. An angular representation of the asymmetry parameter is suggested in order to reliably determine uncertainty margins via linear error propagation.

  12. ASSESSING PEAK AEROBIC CAPACITY IN DUTCH LAW ENFORCEMENT OFFICERS

    NARCIS (Netherlands)

    Wittink, Harriet; Takken, Tim; de Groot, Janke; Reneman, Michiel; Peters, Roelof; Vanhees, Luc

    2015-01-01

    Objectives: To cross-validate the existing peak rate of oxygen consumption (VO2peak) prediction equations in Dutch law enforcement officers and to determine whether these prediction equations can be used to predict VO2peak for groups and in a single individual. A further objective was to report norm

  13. Peak-power-point monitor for solar panel

    Science.gov (United States)

    Schloss, A. I.

    1972-01-01

    Attempt was made to determine solar cell panel peak power capability without disrupting power flow from panel. Separate solar cell strings were switched from panel circuits, and increasingly larger loads were added rapidly until peak power points were transversed. String wattage output was recorded and all stored string measurements summed together indicate peak power point in panel.

  14. Economic and safety analysis of unconventional peak regulation on power unit of peak shifting start-stop

    Science.gov (United States)

    Cao, X.; Zhao, J. F.; Duan, X. Q.; Jin, Y. A.

    2017-01-01

    Tthe capacity difference of peak regulation between the power gird and the actual demand has become a serious problem considering the growth in the difference between electricity supply and demand. Therefore, peak regulation of power grid needs to be deeply studied. Unconventional peak regulation on unit of peak shifting start-stop is a way that can broaden the range of power regulation, as well as benefit safe operation of the power grid. However, it requires frequent and fast unit start-stop, complex operation, and more staff labor. By carrying out unconventional thermal power unit load test, the start-stop mode of peak auxiliary equipment is studied in this paper, indicating that it has a positive effect on safety and economic of load-peaking operation. The best working conditions of the peak units is found by analysing consumption cost, safety specifications, and life lost of the start-stop peak regulation mode.

  15. The formation of peak rings in large impact craters.

    Science.gov (United States)

    Morgan, Joanna V; Gulick, Sean P S; Bralower, Timothy; Chenot, Elise; Christeson, Gail; Claeys, Philippe; Cockell, Charles; Collins, Gareth S; Coolen, Marco J L; Ferrière, Ludovic; Gebhardt, Catalina; Goto, Kazuhisa; Jones, Heather; Kring, David A; Le Ber, Erwan; Lofi, Johanna; Long, Xiao; Lowery, Christopher; Mellett, Claire; Ocampo-Torres, Rubén; Osinski, Gordon R; Perez-Cruz, Ligia; Pickersgill, Annemarie; Poelchau, Michael; Rae, Auriol; Rasmussen, Cornelia; Rebolledo-Vieyra, Mario; Riller, Ulrich; Sato, Honami; Schmitt, Douglas R; Smit, Jan; Tikoo, Sonia; Tomioka, Naotaka; Urrutia-Fucugauchi, Jaime; Whalen, Michael; Wittmann, Axel; Yamaguchi, Kosei E; Zylberman, William

    2016-11-18

    Large impacts provide a mechanism for resurfacing planets through mixing near-surface rocks with deeper material. Central peaks are formed from the dynamic uplift of rocks during crater formation. As crater size increases, central peaks transition to peak rings. Without samples, debate surrounds the mechanics of peak-ring formation and their depth of origin. Chicxulub is the only known impact structure on Earth with an unequivocal peak ring, but it is buried and only accessible through drilling. Expedition 364 sampled the Chicxulub peak ring, which we found was formed from uplifted, fractured, shocked, felsic basement rocks. The peak-ring rocks are cross-cut by dikes and shear zones and have an unusually low density and seismic velocity. Large impacts therefore generate vertical fluxes and increase porosity in planetary crust. Copyright © 2016, American Association for the Advancement of Science.

  16. The formation of peak rings in large impact craters

    Science.gov (United States)

    Morgan, Joanna V.; Gulick, Sean P. S.; Bralower, Timothy; Chenot, Elise; Christeson, Gail; Claeys, Philippe; Cockell, Charles; Collins, Gareth S.; Coolen, Marco J. L.; Ferrière, Ludovic; Gebhardt, Catalina; Goto, Kazuhisa; Jones, Heather; Kring, David A.; Le Ber, Erwan; Lofi, Johanna; Long, Xiao; Lowery, Christopher; Mellett, Claire; Ocampo-Torres, Rubén; Osinski, Gordon R.; Perez-Cruz, Ligia; Pickersgill, Annemarie; Poelchau, Michael; Rae, Auriol; Rasmussen, Cornelia; Rebolledo-Vieyra, Mario; Riller, Ulrich; Sato, Honami; Schmitt, Douglas R.; Smit, Jan; Tikoo, Sonia; Tomioka, Naotaka; Urrutia-Fucugauchi, Jaime; Whalen, Michael; Wittmann, Axel; Yamaguchi, Kosei E.; Zylberman, William

    2016-11-01

    Large impacts provide a mechanism for resurfacing planets through mixing near-surface rocks with deeper material. Central peaks are formed from the dynamic uplift of rocks during crater formation. As crater size increases, central peaks transition to peak rings. Without samples, debate surrounds the mechanics of peak-ring formation and their depth of origin. Chicxulub is the only known impact structure on Earth with an unequivocal peak ring, but it is buried and only accessible through drilling. Expedition 364 sampled the Chicxulub peak ring, which we found was formed from uplifted, fractured, shocked, felsic basement rocks. The peak-ring rocks are cross-cut by dikes and shear zones and have an unusually low density and seismic velocity. Large impacts therefore generate vertical fluxes and increase porosity in planetary crust.

  17. Automatic Peak Selection by a Benjamini-Hochberg-Based Algorithm

    KAUST Repository

    Abbas, Ahmed

    2013-01-07

    A common issue in bioinformatics is that computational methods often generate a large number of predictions sorted according to certain confidence scores. A key problem is then determining how many predictions must be selected to include most of the true predictions while maintaining reasonably high precision. In nuclear magnetic resonance (NMR)-based protein structure determination, for instance, computational peak picking methods are becoming more and more common, although expert-knowledge remains the method of choice to determine how many peaks among thousands of candidate peaks should be taken into consideration to capture the true peaks. Here, we propose a Benjamini-Hochberg (B-H)-based approach that automatically selects the number of peaks. We formulate the peak selection problem as a multiple testing problem. Given a candidate peak list sorted by either volumes or intensities, we first convert the peaks into p-values and then apply the B-H-based algorithm to automatically select the number of peaks. The proposed approach is tested on the state-of-the-art peak picking methods, including WaVPeak [1] and PICKY [2]. Compared with the traditional fixed number-based approach, our approach returns significantly more true peaks. For instance, by combining WaVPeak or PICKY with the proposed method, the missing peak rates are on average reduced by 20% and 26%, respectively, in a benchmark set of 32 spectra extracted from eight proteins. The consensus of the B-H-selected peaks from both WaVPeak and PICKY achieves 88% recall and 83% precision, which significantly outperforms each individual method and the consensus method without using the B-H algorithm. The proposed method can be used as a standard procedure for any peak picking method and straightforwardly applied to some other prediction selection problems in bioinformatics. The source code, documentation and example data of the proposed method is available at http://sfb.kaust.edu.sa/pages/software.aspx. © 2013

  18. Automatic peak selection by a Benjamini-Hochberg-based algorithm.

    Directory of Open Access Journals (Sweden)

    Ahmed Abbas

    Full Text Available A common issue in bioinformatics is that computational methods often generate a large number of predictions sorted according to certain confidence scores. A key problem is then determining how many predictions must be selected to include most of the true predictions while maintaining reasonably high precision. In nuclear magnetic resonance (NMR-based protein structure determination, for instance, computational peak picking methods are becoming more and more common, although expert-knowledge remains the method of choice to determine how many peaks among thousands of candidate peaks should be taken into consideration to capture the true peaks. Here, we propose a Benjamini-Hochberg (B-H-based approach that automatically selects the number of peaks. We formulate the peak selection problem as a multiple testing problem. Given a candidate peak list sorted by either volumes or intensities, we first convert the peaks into [Formula: see text]-values and then apply the B-H-based algorithm to automatically select the number of peaks. The proposed approach is tested on the state-of-the-art peak picking methods, including WaVPeak [1] and PICKY [2]. Compared with the traditional fixed number-based approach, our approach returns significantly more true peaks. For instance, by combining WaVPeak or PICKY with the proposed method, the missing peak rates are on average reduced by 20% and 26%, respectively, in a benchmark set of 32 spectra extracted from eight proteins. The consensus of the B-H-selected peaks from both WaVPeak and PICKY achieves 88% recall and 83% precision, which significantly outperforms each individual method and the consensus method without using the B-H algorithm. The proposed method can be used as a standard procedure for any peak picking method and straightforwardly applied to some other prediction selection problems in bioinformatics. The source code, documentation and example data of the proposed method is available at http://sfb.kaust.edu.sa/pages/software.aspx.

  19. Reference Values for Peak Exercise Cardiac Output in Healthy Individuals.

    Science.gov (United States)

    Agostoni, Piergiuseppe; Vignati, Carlo; Gentile, Piero; Boiti, Costanza; Farina, Stefania; Salvioni, Elisabetta; Mapelli, Massimo; Magrì, Damiano; Paolillo, Stefania; Corrieri, Nicoletta; Sinagra, Gianfranco; Cattadori, Gaia

    2017-06-01

    Cardiac output (Q˙) is a key parameter in the assessment of cardiac function, its measurement being crucial for the diagnosis, treatment, and prognostic evaluation of all heart diseases. Until recently, Q˙ determination at peak exercise has been possible through invasive methods, so that normal values were obtained in studies based on small populations. Nowadays, peak Q˙ can be measured noninvasively by means of the inert gas rebreathing (IGR) technique. The present study was undertaken to provide reference values for peak Q˙ in the normal general population and to obtain a formula able to estimate peak exercise Q˙ from measured peak oxygen uptake (V˙o2). We studied 500 normal subjects (age, 44.9 ± 1.5 years; range, 18-77 years; 260 men, 240 women) who underwent a maximal cardiopulmonary exercise test with peak Q˙ measurement by IGR. In the overall study sample, peak Q˙ was 13.2 ± 3.5 L/min (men, 15.3 ± 3.3 L/min; women, 11.0 ± 2.0 L/min; P exercise was (4.4 × peak V˙o2) + 4.3 in the overall study cohort, (4.3 × peak V˙o2) + 4.5 in men, and (4.9 × peak V˙o2) + 3.6 in women. The simultaneous measurement of Q˙ and V˙o2 at peak exercise in a large sample of healthy subjects provided an equation to predict peak Q˙ from peak V˙o2 values. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  20. Do asthma patients prefer to monitor symptoms or peak flow?

    Science.gov (United States)

    Harver, Andrew; Humphries, C Thomas; Kotses, Harry

    2009-11-01

    We administered a 65-item survey to patients to assess preference of symptoms and peak flow to detect worsening asthma and to collect information about asthma triggers, asthma knowledge sources, and barriers to peak flow meter use. It was completed by 139 asthma patients. Survey responses were comparable for adult and pediatric patients and for those who owned peak flow meters and those who did not. But patients who owned a peak flow meter reported more severe asthma than others. On average, the patients preferred symptoms to peak flow for assessing worsening asthma. It is likely that the preference for symptom over peak flow monitoring was effort related: Patients preferred symptom monitoring because it was the easier of the two to conduct.

  1. Gamma-ray peak shapes from cadmium zinc telluride detectors

    Energy Technology Data Exchange (ETDEWEB)

    Namboodiri, M.N.; Lavietes, A.D.; McQuaid, J.H.

    1996-09-01

    We report the results of a study of the peak shapes in the gamma spectra measured using several 5 x 5 x 5 mm{sup 3} cadmium zinc telluride (CZT) detectors. A simple parameterization involving a Gaussian and an exponential low energy tail describes the peak shapes sell. We present the variation of the parameters with gamma energy. This type of information is very useful in the analysis of complex gamma spectra consisting of many peaks.

  2. Peak experiences of psilocybin users and non-users.

    Science.gov (United States)

    Cummins, Christina; Lyke, Jennifer

    2013-01-01

    Maslow (1970) defined peak experiences as the most wonderful experiences of a person's life, which may include a sense of awe, well-being, or transcendence. Furthermore, recent research has suggested that psilocybin can produce experiences subjectively rated as uniquely meaningful and significant (Griffiths et al. 2006). It is therefore possible that psilocybin may facilitate or change the nature of peak experiences in users compared to non-users. This study was designed to compare the peak experiences of psilocybin users and non-users, to evaluate the frequency of peak experiences while under the influence of psilocybin, and to assess the perceived degree of alteration of consciousness during these experiences. Participants were recruited through convenience and snowball sampling from undergraduate classes and at a musical event. Participants were divided into three groups, those who reported a peak experience while under the influence of psilocybin (psilocybin peak experience: PPE), participants who had used psilocybin but reported their peak experiences did not occur while they were under the influence of psilocybin (non-psilocybin peak experience: NPPE), and participants who had never used psilocybin (non-user: NU). A total of 101 participants were asked to think about their peak experiences and complete a measure evaluating the degree of alteration of consciousness during that experience. Results indicated that 47% of psilocybin users reported their peak experience occurred while using psilocybin. In addition, there were significant differences among the three groups on all dimensions of alteration of consciousness. Future research is necessary to identify factors that influence the peak experiences of psilocybin users in naturalistic settings and contribute to the different characteristics of peak experiences of psilocybin users and non-users.

  3. Some nonlinear parameters of PP intervals of pulse main peaks

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The PP intervals of pulse main peaks from healthy and unhealthy people (arrhythmia) have different nonlinear characteristics. In this paper, the extraction of PP intervals of pulse main peaks is achieved by picking up P peaks of pulse wave with wavelet transform. Furthermore, several nonlinear parameters (correlative dimensions, maximum Lyapunov exponents, complexity and approximate entropy) of the PP intervals of pulse main peaks extracted from normal and unhealthy pulse signals are calculated, with the results showing that these nonlinear parameters calculated from the main wave interval signals are helpful for analyzing human's health state and diagnosing heart diseases.

  4. Peak load pricing in the electric utility industry

    Energy Technology Data Exchange (ETDEWEB)

    Wenders, J.T.

    In the electric utility industry, cost minimization requires that heterogeneous electric generation technologies be used to produce electricity demands of different durations. In contrast to the conclusions of traditional peak-load pricing theory, the existence of a heterogeneous capital stock means that off-peak marginal cost prices almost always should include some marginal capacity costs, and that the profit maximizing regulated electric utility may set peak price above marginal cost and off-peak price below marginal cost in order to encourage the expansion of capital-intensive base load generating capacity. (auth)

  5. Nonlinear preprocessing method for detecting peaks from gas chromatograms

    Directory of Open Access Journals (Sweden)

    Min Hyeyoung

    2009-11-01

    Full Text Available Abstract Background The problem of locating valid peaks from data corrupted by noise frequently arises while analyzing experimental data. In various biological and chemical data analysis tasks, peak detection thus constitutes a critical preprocessing step that greatly affects downstream analysis and eventual quality of experiments. Many existing techniques require the users to adjust parameters by trial and error, which is error-prone, time-consuming and often leads to incorrect analysis results. Worse, conventional approaches tend to report an excessive number of false alarms by finding fictitious peaks generated by mere noise. Results We have designed a novel peak detection method that can significantly reduce parameter sensitivity, yet providing excellent peak detection performance and negligible false alarm rates from gas chromatographic data. The key feature of our new algorithm is the successive use of peak enhancement algorithms that are deliberately designed for a gradual improvement of peak detection quality. We tested our approach with real gas chromatograms as well as intentionally contaminated spectra that contain Gaussian or speckle-type noise. Conclusion Our results demonstrate that the proposed method can achieve near perfect peak detection performance while maintaining very small false alarm probabilities in case of gas chromatograms. Given the fact that biological signals appear in the form of peaks in various experimental data and that the propose method can easily be extended to such data, our approach will be a useful and robust tool that can help researchers highlight valid signals in their noisy measurements.

  6. Adaptive Peak Frequency Estimation Using a Database of PARCOR Coefficients

    Directory of Open Access Journals (Sweden)

    Iiguni Youji

    2005-01-01

    Full Text Available This paper presents an adaptive peak frequency estimation method using a database that stores PARCOR coefficients as key attributes and the corresponding peak frequencies as nonkey attributes. The least-square lattice algorithm is used to recursively estimate the PARCOR coefficients to adapt to changing circumstances. The nearest neighbor to the current PARCOR coefficient is retrieved from the database, and the corresponding peak frequency is regarded as the estimation. A simultaneous execution of database construction and peak estimation with database update is performed to accelerate the processing time and to improve the estimation accuracy.

  7. Peak compression technique in high-performance liquid chromatography

    Institute of Scientific and Technical Information of China (English)

    WEI YuXia; WANG Lin; XlAO ShengYuan; QING Hong; ZHU Yong; HU GaoFei; DENG YuLin

    2009-01-01

    Peak compression technique based on the difference of the solute migration velocity in two different mobile phases was described theoretically and confirmed using benzaldehyde and 4-hydroxyquinoline (4-HQ) as model compounds.After peak compression,the peak compression factors (the ratio of peak width at half-height under non-compression and that under compression condition) of benzaldehyde and 4-HQ were 0.19 and 0.13,respectively.By this application of the peak compression technique to the mixture,both enhanced peak height and good separation were obtained in one run cycle.This peak compression technique was introduced to determine benzaldehyde from semicarbazide-sensitive amine oxidase-catalyzed enzymetic reaction in order to illustrate the applicability of this technique to the real sample.As a result,the peak was compressed effectively,and 4.94-fold,19.3-fold and 5.74-fold enhancement in peak height,plate number and signal to noise ratio were also achieved,respectively.

  8. Zener Relaxation Peak in an Fe-Cr-Al Alloy

    Institute of Scientific and Technical Information of China (English)

    周正存; 程和法; 宫晨利; 魏健宁; 韩福生

    2002-01-01

    We have studied the temperature spectra of internal friction and relative dynamic modulus of the Fe-(25 wt%)Cr-(5wt%)Al alloy with different grain sizes. It is found that a peak appears in the internal friction versus temperature plot at about 550°C. The peak is of a stable relaxation and is reversible, which occurs not only during heating but also during cooling. Its activation energy is 2.5 (± 0.15) eV in terms of the Arrhenius relation. In addition, the peak is not obvious in specimens with a smaller grain size. It is suggested that the peak originates from Zener relaxation.

  9. Assessing peak aerobic capacity in Dutch law enforcement officers

    Directory of Open Access Journals (Sweden)

    Harriet Wittink

    2015-06-01

    Full Text Available Objectives: To cross-validate the existing peak rate of oxygen consumption (VO2peak prediction equations in Dutch law enforcement officers and to determine whether these prediction equations can be used to predict VO2peak for groups and in a single individual. A further objective was to report normative absolute and relative VO2peak values of a sample of law enforcement officers in the Netherlands. Material and Methods: The peak rate of oxygen consumption (ml×kg–1×min–1 was measured using a maximal incremental bicycle test in 1530 subjects, including 1068 male and 461 female police officers. Validity of the prediction equations for groups was assessed by comparing predicted VO2peak with measured VO2peak using paired t-tests. For individual differences limits of agreement (LoA were calculated. Equations were considered valid for individuals when the difference between measured and predicted VO2peak did not exceed ±1 metabolic equivalent (MET in 95% of individuals. Results: None of the equations met the validity criterion of 95% of individuals having ±1 MET difference or less than the measured value. Limits of agreement (LoAs were large in all predictions. At the individual level, none of the equations were valid predictors of VO2peak (ml×kg–1×min–1. Normative values for Dutch law enforcement officers were presented. Conclusions: Substantial differences between measured and predicted VO2peak (ml×kg–1×min–1 were found. Most tested equations were invalid predictors of VO2peak at group level and all were invalid at individual levels.

  10. Assessing peak aerobic capacity in Dutch law enforcement officers.

    Science.gov (United States)

    Wittink, Harriet; Takken, Tim; de Groot, Janke; Reneman, Michiel; Peters, Roelof; Vanhees, Luc

    2015-01-01

    To cross-validate the existing peak rate of oxygen consumption (VO2peak) prediction equations in Dutch law enforcement officers and to determine whether these prediction equations can be used to predict VO2peak for groups and in a single individual. A further objective was to report normative absolute and relative VO2peak values of a sample of law enforcement officers in the Netherlands. The peak rate of oxygen consumption (ml×kg-1×min-1) was measured using a maximal incremental bicycle test in 1530 subjects, including 1068 male and 461 female police officers. Validity of the prediction equations for groups was assessed by comparing predicted VO2peak with measured VO2peak using paired t-tests. For individual differences limits of agreement (LoA) were calculated. Equations were considered valid for individuals when the difference between measured and predicted VO2peak did not exceed ±1 metabolic equivalent (MET) in 95% of individuals. None of the equations met the validity criterion of 95% of individuals having ±1 MET difference or less than the measured value. Limits of agreement (LoAs) were large in all predictions. At the individual level, none of the equations were valid predictors of VO2peak (ml×kg-1×min-1). Normative values for Dutch law enforcement officers were presented. Substantial differences between measured and predicted VO2peak (ml×kg-1×min-1) were found. Most tested equations were invalid predictors of VO2peak at group level and all were invalid at individual levels. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  11. Volcanic jet noise: infrasonic source processes and atmospheric propagation

    Science.gov (United States)

    Matoza, R. S.; Fee, D.; Ogden, D. E.

    2011-12-01

    Volcanic eruption columns are complex flows consisting of (possibly supersonic) injections of ash-gas mixtures into the atmosphere. A volcanic eruption column can be modeled as a lower momentum-driven jet (the gas-thrust region), which transitions with altitude into a thermally buoyant plume. Matoza et al. [2009] proposed that broadband infrasonic signals recorded during this type of volcanic activity represent a low-frequency form of jet noise. Jet noise is produced at higher acoustic frequencies by smaller-scale man-made jet flows (e.g., turbulent jet flow from jet engines and rockets). Jet noise generation processes could operate at larger spatial scales and produce infrasonic frequencies in the lower gas-thrust portion of the eruption column. Jet-noise-like infrasonic signals have been observed at ranges of tens to thousands of kilometers from sustained volcanic explosions at Mount St. Helens, WA; Tungurahua, Ecuador; Redoubt, AK; and Sarychev Peak, Kuril Islands. Over such distances, the atmosphere cannot be considered homogeneous. Long-range infrasound propagation takes place primarily in waveguides formed by vertical gradients in temperature and horizontal winds, and exhibits strong spatiotemporal variability. The timing and location of volcanic explosions can be estimated from remote infrasonic data and could be used with ash cloud dispersion forecasts for hazard mitigation. Source studies of infrasonic volcanic jet noise, coupled with infrasound propagation modeling, hold promise for being able to constrain more detailed eruption jet parameters with remote, ground-based geophysical data. Here we present recent work on the generation and propagation of volcanic jet noise. Matoza, R. S., D. Fee, M. A. Garcés, J. M. Seiner, P. A. Ramón, and M. A. H. Hedlin (2009), Infrasonic jet noise from volcanic eruptions, Geophys. Res. Lett., 36, L08303, doi:10.1029/2008GL036486.

  12. Online junction temperature measurement using peak gate current

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Iannuzzo, Francesco

    2015-01-01

    A new method for junction temperature measurement of MOS-gated power semiconductor switches is presented. The measurement method involves detecting the peak voltage over the external gate resistor of an IGBT or MOSFET during turn-on. This voltage is directly proportional to the peak gate current...

  13. Quality Assurance in the Determination of Overlapping Peak Areas

    DEFF Research Database (Denmark)

    Christensen, L.H.; Heydorn, K.

    1987-01-01

    The ability of different computer programs to yield accurate peak areas in statistical control in the case of partially overlapping photopeaks has been tested by the Analysis of Precision. A modified Covell method, two commercially available peak-fitting programs from Nuclear Data and Ortec, and ...

  14. Psychological Preparation for Peak Performance in Sports Competition

    Science.gov (United States)

    Ohuruogu, Ben; Jonathan, Ugwuanyi I.; Ikechukwu, Ugwu Jude

    2016-01-01

    This paper attempts to make an overview of various techniques, sport psychologist adopt in psychological preparation of athletes for peak performance. To attain peak performance in sports competitions, coaches and athletes should not base their prospect on physical training on sport skills alone rather should integrate both the mental and physical…

  15. Probabilistic peak detection for first-order chromatographic data

    NARCIS (Netherlands)

    Lopatka, M.; Vivó-Truyols, G.; Sjerps, M.J.

    2014-01-01

    We present a novel algorithm for probabilistic peak detection in first-order chromatographic data. Unlike conventional methods that deliver a binary answer pertaining to the expected presence or absence of a chromatographic peak, our method calculates the probability of a point being affected by suc

  16. A rise in peak performance age in female athletes.

    Science.gov (United States)

    Elmenshawy, Ahmed R; Machin, Daniel R; Tanaka, Hirofumi

    2015-06-01

    It was reported in 1980s that ages at which peak performance was observed had remained remarkably stable in the past century, although absolute levels of athletic performance increased dramatically for the same time span. The emergence of older (masters) athletes in the past few decades has changed the demographics and age-spectrum of Olympic athletes. The primary aim of the present study was to determine whether the ages at which peak performance was observed had increased in the recent decades. The data spanning 114 years from the first Olympics (1898) to the most recent Olympics (2014) were collected using the publically available data. In the present study, ages at which Olympic medals (gold, silver, and bronze) were won were used as the indicators of peak performance age. Track and field, swimming, rowing, and ice skating events were analyzed. In men, peak performance age did not change significantly in most of the sporting events (except in 100 m sprint running). In contrast, peak performance ages in women have increased significantly since 1980s and consistently in all the athletic events examined. Interestingly, as women's peak performance age increased, they became similar to men's peak ages in many events. In the last 20-30 years, ages at which peak athletic performance is observed have increased in women but not in men.

  17. Peaked Periodic Wave Solutions to the Broer–Kaup Equation

    Science.gov (United States)

    Jiang, Bo; Bi, Qin-Sheng

    2017-01-01

    By qualitative analysis method, a sufficient condition for the existence of peaked periodic wave solutions to the Broer–Kaup equation is given. Some exact explicit expressions of peaked periodic wave solutions are also presented. Supported by National Nature Science Foundation of China under Grant No. 11102076 and Natural Science Fund for Colleges and Universities in Jiangsu Province under Grant No. 15KJB110005

  18. Deformation Induced Internal Friction Peaks in Nanocrystalline Nickel

    Institute of Scientific and Technical Information of China (English)

    LI Ping-Yun; ZHANG Xi-Yan; NI Hai-Tao; CAO Zhen-Hua; MENG Xiang-Kang

    2012-01-01

    We report the mechanical spectroscopy study of the cold-rolling induced dynamical behavior of crystalline defects in nanocrystalline (NC) nickel. The results show that internal friction (IF) peaks in NC nickel can be induced by cold-rolling. An IF peak, originating from dislocation activity, occurs when the strain is in the range of 9.7-32.8%. Two Bordoni peaks occur when the strain is 39.0% and an IF peak associated with deformation twinning appears when the strain is 42.6%. These results mean that deformation of NC nickel is mediated by different kinds of defects as the strain increases.%We report the mechanical spectroscopy study of the cold-rolling induced dynamical behavior of crystalline defects in nanocrystalline (NC) nickel The results show that internal friction (IF) peaks in NC nickel can be induced by cold-rolling.An IF peak,originating from dislocation activity,occurs when the strain is in the range of 9.7- 32.8%.Two Bordoni peaks occur when the strain is 39.0% and an IF peak associated with deformation twinning appears when the strain is 42.6%.These results mean that deformation of NC nickel is mediated by different kinds of defects as the strain increases.

  19. OBSERVATION OF ENERGY DISSIPATION PEAK IN POLYSTYRENE MELT ABOVE Tg

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper two different kinds of dynamic mechanical techniques (inversed torsion pendulum and energy dissipation apparatus) were used to study the dynamic behavior of atactic monodisperse polystyrene above glass transition.The plots of energy dissipation versus temperature were presented for two atactic polystyrene samples. An apparent energy dissipation peak occurred above Tg in each plot measured by the inversed torsion pendulum, and simultaneously the sample was found to flow assuredly at the moment. To exclude the influence of the flow and demonstrate there was a peak indeed above Tg, the energy dissipation apparatus was used, in which the samples were put into a cup. An obvious peak appeared,and it was in agreement with the peak observed by the inversed torsion pendulum. On basis of the results measured by the two kinds of apparatus, a conclusion is drawn that a peak occurrs above Tg, which gives a manifestation for the existence of the liquid-liquid transition.

  20. Maximizing utilization of sport halls during peak hours

    DEFF Research Database (Denmark)

    Iversen, Evald Bundgård; Forsberg, Peter

    be increased during peak hours. DATA AND METHODOLOGYData is collected by observation of activities during two weeks on for example whether halls are used or not; the amount of playing field used; and number of participants (Iversen, 2012). Data on 1.331 activities in 36 sport halls across 4 municipalities have...... been collected. RESULTS The number of participants per activity is higher during peak hours, which is expected when demand is high. However, the usage of sport floor only differs slightly between peak and low hours. Both during peak and low hours on average 80-100 per cent of floor space is used......BACKGROUNDDuring peak hours (4.30pm-8pm) demand for timeslots in sport halls in Denmark are high and there are few timeslots available. Further, focus on how public resources are spent most efficient is increasing (Iversen, 2013). This makes it interesting to analyse how utilization could...

  1. Impact of Smart Grid Technologies on Peak Load to 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The IEA's Smart Grids Technology Roadmap identified five global trends that could be effectively addressed by deploying smart grids. These are: increasing peak load (the maximum power that the grid delivers during peak hours), rising electricity consumption, electrification of transport, deployment of variable generation technologies (e.g. wind and solar PV) and ageing infrastructure. Along with this roadmap, a new working paper -- Impact of Smart Grid Technologies on Peak Load to 2050 -- develops a methodology to estimate the evolution of peak load until 2050. It also analyses the impact of smart grid technologies in reducing peak load for four key regions; OECD North America, OECD Europe, OECD Pacific and China. This working paper is a first IEA effort in an evolving modelling process of smart grids that is considering demand response in residential and commercial sectors as well as the integration of electric vehicles.

  2. Arrival Times of Gravitational Radiation Peaks for Binary Inspiral

    CERN Document Server

    Price, Richard H

    2016-01-01

    Modeling of gravitational waves (GWs) from binary black hole inspiral brings together early post-Newtonian waveforms and late quasinormal ringing waveforms. Attempts to bridge the two limits without recourse to numerical relativity involve predicting the time of the peak GW amplitude. This prediction will require solving the question of why the peak of the "source," i.e., the peak of the binary angular velocity, does not correspond to the peak of the GW amplitude. We show here that this offset can be understood as due to the existence two distinct components of the radiation: the "direct" radiation analogous to that in flat spacetime, and "scattered" radiation associated with curved spacetime. The time dependence of these two components, and of their relative phases determines the location of the peak amplitude. We use a highly simplified model to clarify the twocomponent nature of the source, then demonstrate that the explanation is valid also for an extreme mass ratio binary inspiral.

  3. Derived Equivalence Relations of Geometry Skills in Students with Autism: An Application of the PEAK-E Curriculum

    Science.gov (United States)

    Dixon, Mark R.; Belisle, Jordan; Stanley, Caleb R.; Daar, Jacob H.; Williams, Leigh Anne

    2016-01-01

    The present study evaluated the efficacy of equivalence-based instruction (EBI) as described in the PEAK-E curriculum (Dixon, 2015) for promoting the emergence of derived geometry skills in two children with high-functioning autism. The results suggested that direct training of shape name (A) to shape property (B) (i.e., A-B relations) was…

  4. Peak broadening in paper chromatography and related techniques : III. Peak broadening in thin-layer chromatography on cellulose powder

    NARCIS (Netherlands)

    Ligny, C.L. de; Remijnse, A.G.

    1968-01-01

    The mechanism of peak broadening in thin-layer chromatography on cellulose powder was investigated by comparing the peak widths obtained in chromatography with those caused only by diffusion in the cellulose powder, for a set of amino acids of widely differing RF values and six kinds of cellulose

  5. Peak broadening in paper chromatography and related techniques : III. Peak broadening in thin-layer chromatography on cellulose powder

    NARCIS (Netherlands)

    Ligny, C.L. de; Remijnse, A.G.

    1968-01-01

    The mechanism of peak broadening in thin-layer chromatography on cellulose powder was investigated by comparing the peak widths obtained in chromatography with those caused only by diffusion in the cellulose powder, for a set of amino acids of widely differing RF values and six kinds of cellulose po

  6. Generation of sub-nanosecond pulses using peaking capacitor

    Directory of Open Access Journals (Sweden)

    Madhu Palati

    2017-05-01

    Full Text Available This paper discusses the analysis, simulation and design of a peaking circuit comprising of a peaking capacitor, spark gap and load circuit. The peaking circuit is used along with a 200 kV, 20 J Marx generator for generation of sub-nanosecond pulses. A high pressure chamber to accommodate the peaking circuit was designed and fabricated and tested upto a pressure of 70 kg/cm2. Total estimated values of the capacitance and inductance of the peaking circuit are 10 pF and 72 nH respectively. At full charging voltage, the peaking capacitor gets charged to a peak voltage of 394.6 kV in 15 ns. The output switch is closed at this instant. From Analysis & Simulation, the output current & rise time (with a matched load of 85 Ω are 2.53 kA and 0.62 ns.

  7. Peak shift discrimination learning as a mechanism of signal evolution.

    Science.gov (United States)

    Lynn, Spencer K; Cnaani, Jonathan; Papaj, Daniel R

    2005-06-01

    "Peak shift" is a behavioral response bias arising from discrimination learning in which animals display a directional, but limited, preference for or avoidance of unusual stimuli. Its hypothesized evolutionary relevance has been primarily in the realm of aposematic coloration and limited sexual dimorphism. Here, we develop a novel functional approach to peak shift, based on signal detection theory, which characterizes the response bias as arising from uncertainty about stimulus appearance, frequency, and quality. This approach allows the influence of peak shift to be generalized to the evolution of signals in a variety of domains and sensory modalities. The approach is illustrated with a bumblebee (Bombus impatiens) discrimination learning experiment. Bees exhibited peak shift while foraging in an artificial Batesian mimicry system. Changes in flower abundance, color distribution, and visitation reward induced bees to preferentially visit novel flower colors that reduced the risk of flower-type misidentification. Under conditions of signal uncertainty, peak shift results in visitation to rarer, but more easily distinguished, morphological variants of rewarding species in preference to their average morphology. Peak shift is a common and taxonomically widespread phenomenon. This example of the possible role of peak shift in signal evolution can be generalized to other systems in which a signal receiver learns to make choices in situations in which signal variation is linked to the sender's reproductive success.

  8. Infrared absorption peaks in nitrogen doped CZ silicon

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, N. [RIAST, Osaka Prefecture University, Gakuen-cho, Sakai, Osaka 599-8570 (Japan); JEITA Nitrogen Measurement WG, 3-11 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan)]. E-mail: inouen@riast.osakafu-u.ac.jp; Nakatsu, M. [RIAST, Osaka Prefecture University, Gakuen-cho, Sakai, Osaka 599-8570 (Japan); Ono, H. [Japan Fine Ceramics Center, 2-4-3 Nishi-shinbashi, Minato-ku, Tokyo 105-0003 (Japan); JEITA Nitrogen Measurement WG, 3-11 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 (Japan); Inoue, Y. [Tokyo University of Education, Bunkyo-ku, Tokyo 117-0002 (Japan)

    2006-10-15

    Dependences on annealing temperature and nitrogen concentration were examined for new local vibration mode infrared absorption peaks at 856, 973, 984 and 1002 cm{sup -1} in nitrogen-doped CZ silicon crystal. The new absorption peaks were so weak that two sets of samples were examined for temperature and concentration dependences, respectively, to get reliable results. The peak at 1002 cm{sup -1} behaved similarly for annealing, though much weaker, to the known peaks at 810 and 1018 cm{sup -1} which are attributed to interstitial N pair accompanied by the two oxygen interstitials (NNO {sub i}O {sub i}). This suggests that the origin contains 2 O {sub i} also. It was strong in low concentration regime, which is similar to the behavior of shallow thermal donors. This suggests that the structure contains one nitrogen rather than two (N-O interstitial pair). The results were compared with the electronic transition absorption by shallow thermal donors (STD). The absorptions at 1002 and 240 cm{sup -1} behaved similarly. These suggest that the peak at 1002 cm{sup -1} is likely due to NOO {sub i}O {sub i} which is the candidate for STD. The temperature dependence of the other new peaks was slightly different from each other. Origin of the other peaks is not clear yet.

  9. Peak loads and network investments in sustainable energy transitions

    Energy Technology Data Exchange (ETDEWEB)

    Blokhuis, Erik, E-mail: e.g.j.blokhuis@tue.nl [Eindhoven University of Technology, Department of Architecture, Building and Planning, Vertigo 8.11, P.O. Box 513, 5600MB Eindhoven (Netherlands); Brouwers, Bart [Eindhoven University of Technology, Department of Architecture, Building and Planning, Vertigo 8.11, P.O. Box 513, 5600MB Eindhoven (Netherlands); Putten, Eric van der [Endinet, Gas and Electricity Network Operations, P.O. Box 2005, 5600CA Eindhoven (Netherlands); Schaefer, Wim [Eindhoven University of Technology, Department of Architecture, Building and Planning, Vertigo 8.11, P.O. Box 513, 5600MB Eindhoven (Netherlands)

    2011-10-15

    Current energy distribution networks are often not equipped for facilitating expected sustainable transitions. Major concerns for future electricity networks are the possibility of peak load increases and the expected growth of decentralized energy generation. In this article, we focus on peak load increases; the effects of possible future developments on peak loads are studied, together with the consequences for the network. The city of Eindhoven (the Netherlands) is used as reference city, for which a scenario is developed in which the assumed future developments adversely influence the maximum peak loads on the network. In this scenario, the total electricity peak load in Eindhoven is expected to increase from 198 MVA in 2009 to 591-633 MVA in 2040. The necessary investments for facilitating the expected increased peak loads are estimated at 305-375 million Euros. Based upon these projections, it is advocated that - contrary to current Dutch policy - choices regarding sustainable transitions should be made from the viewpoint of integral energy systems, evaluating economic implications of changes to generation, grid development, and consumption. Recently applied and finished policies on energy demand reduction showed to be effective; however, additional and connecting policies on energy generation and distribution should be considered on short term. - Highlights: > Sustainable energy transitions can result in major electricity peak load increases. > Introduction of heat pumps and electrical vehicles requires network expansion. > Under worst case assumptions, peak loads in Eindhoven increase with 200% until 2040. > The necessary investment for facilitating this 2040 peak demand is Euro 305-375 million. > Future policy choices should be made from the viewpoint of the integral energy system.

  10. Constellation Modification Method for OFDM Peak Power Reduction

    Directory of Open Access Journals (Sweden)

    R V. Orishko

    2011-10-01

    Full Text Available Constellation modification method for OFDM peak power reduction is considered. Choosing function which sum with OFDM symbol gives new symbol with lower peak power is the main idea of method. Signal modification by means of this function carrying out at subcarriers modulation constellation domain. Fourier transform of given function is executing, values obtained for the spectral components are added to the spectral components of the signal and reformed modified OFDM symbol. Main qualities and capabilities for given modification function and different subcarrier modulation methods is analyzed. Obtained plots of peak factor of the coefficients of the algorithm and the algorithm efficiency.

  11. Determination of kinetic energy release from metastable peak widths

    DEFF Research Database (Denmark)

    Petersen, Allan Christian; Sølling, Theis I.

    2017-01-01

    The kinetic energy that is released upon bond rupture is often represented as T1/2. A value that is derived from the FWHM of a fragment peak by the use of two different conversion formulas. The choice of formula depends on whether the peak is recorded by scanning a magnetic sector...... that are obtained from magnet scans compared to the peaks that are obtained by scanning an electrostatic analyzer. The E scans (MIKE experiments) give rise to the same values for both of the employed mass spectrometers. The results are explained in terms of energy defocusing when the reactions take place too far...

  12. Pressure dependence of the Boson peak in poly(butadiene)

    CERN Document Server

    Frick, B

    2002-01-01

    Variation of pressure and temperature in inelastic neutron scattering experiments allows us to separate density and thermal energy contributions. We summarise briefly the influence of pressure and temperature on the dynamic scattering law of the polymer glass former poly(butadiene) far below the glass transition. We also show the advantage of using a liquid-niobium pressure cell in such studies. The effect of pressure on the boson peak is to shift the peak towards higher energies and to reduce the low-frequency modes more strongly below the boson-peak maximum than above. A decrease in the Debye-Waller factor with increasing pressure is observed. (orig.)

  13. Determination of the total absorption peak in an electromagnetic calorimeter

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jia-Hua [Institute of Physics, National Chiao-Tung University, Hsinchu (China); Wang, Zhe, E-mail: wangzhe-hep@mail.tsinghua.edu.cn [Department of Engineering Physics, Tsinghua University, Beijing (China); Key Laboratory of Particle & Radiation Imaging (Tsinghua University), Ministry of Education (China); Lebanowski, Logan [Department of Engineering Physics, Tsinghua University, Beijing (China); Key Laboratory of Particle & Radiation Imaging (Tsinghua University), Ministry of Education (China); Lin, Guey-Lin [Institute of Physics, National Chiao-Tung University, Hsinchu (China); Chen, Shaomin [Department of Engineering Physics, Tsinghua University, Beijing (China); Key Laboratory of Particle & Radiation Imaging (Tsinghua University), Ministry of Education (China)

    2016-08-11

    A physically motivated function was developed to accurately determine the total absorption peak in an electromagnetic calorimeter and to overcome biases present in many commonly used methods. The function is the convolution of a detector resolution function with the sum of a delta function, which represents the complete absorption of energy, and a tail function, which describes the partial absorption of energy and depends on the detector materials and structures. Its performance was tested with the simulation of three typical cases. The accuracy of the extracted peak value, resolution, and peak area was improved by an order of magnitude on average, relative to the Crystal Ball function.

  14. Determination of the total absorption peak in an electromagnetic calorimeter

    CERN Document Server

    Cheng, Jia-Hua; Lebanowski, Logan; Lin, Guey-Lin; Chen, Shaomin

    2016-01-01

    A physically-motivated function was developed to accurately determine the total absorption peak in an electromagnetic calorimeter and to overcome biases present in many commonly used methods. The function is the convolution of a detector resolution function with the sum of a delta function, which represents the complete absorption of energy, and a tail function, which describes the partial absorption of energy and depends on the detector materials and structures. Its performance was tested with the simulation of three typical cases. The accuracy of the extracted peak value, resolution, and peak area was improved by an order of magnitude on average, relative to the Crystal Ball function.

  15. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This three-volume report is responsive to the requirements of Contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program of computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. This section of the three volume report is a final report appendix with information on the National Energy Peak Leveling Program (NEPLP).

  16. Evaluation of peak-picking algorithms for protein mass spectrometry.

    Science.gov (United States)

    Bauer, Chris; Cramer, Rainer; Schuchhardt, Johannes

    2011-01-01

    Peak picking is an early key step in MS data analysis. We compare three commonly used approaches to peak picking and discuss their merits by means of statistical analysis. Methods investigated encompass signal-to-noise ratio, continuous wavelet transform, and a correlation-based approach using a Gaussian template. Functionality of the three methods is illustrated and discussed in a practical context using a mass spectral data set created with MALDI-TOF technology. Sensitivity and specificity are investigated using a manually defined reference set of peaks. As an additional criterion, the robustness of the three methods is assessed by a perturbation analysis and illustrated using ROC curves.

  17. Modeled future peak streamflows in four coastal Maine rivers

    Science.gov (United States)

    Hodgkins, Glenn A.; Dudley, Robert W.

    2013-01-01

    To safely and economically design bridges and culverts, it is necessary to compute the magnitude of peak streamflows that have specified annual exceedance probabilities (AEPs). Annual precipitation and air temperature in the northeastern United States are, in general, projected to increase during the 21st century. It is therefore important for engineers and resource managers to understand how peak flows may change in the future. This report, prepared in cooperation with the Maine Department of Transportation (MaineDOT), presents modeled changes in peak flows at four basins in coastal Maine on the basis of projected changes in air temperature and precipitation. To estimate future peak streamflows at the four basins in this study, historical values for climate (temperature and precipitation) in the basins were adjusted by different amounts and input to a hydrologic model of each study basin. To encompass the projected changes in climate in coastal Maine by the end of the 21st century, air temperatures were adjusted by four different amounts, from -3.6 degrees Fahrenheit (ºF) (-2 degrees Celsius (ºC)) to +10.8 ºF (+6 ºC) of observed temperatures. Precipitation was adjusted by three different percentage values from -15 percent to +30 percent of observed precipitation. The resulting 20 combinations of temperature and precipitation changes (includes the no-change scenarios) were input to Precipitation-Runoff Modeling System (PRMS) watershed models, and annual daily maximum peak flows were calculated for each combination. Modeled peak flows from the adjusted changes in temperature and precipitation were compared to unadjusted (historical) modeled peak flows. Annual daily maximum peak flows increase or decrease, depending on whether temperature or precipitation is adjusted; increases in air temperature (with no change in precipitation) lead to decreases in peak flows, whereas increases in precipitation (with no change in temperature) lead to increases in peak flows. As

  18. annoPeak: a web application to annotate and visualize peaks from ChIP-seq/ChIP-exo-seq.

    Science.gov (United States)

    Tang, Xing; Srivastava, Arunima; Liu, Huayang; Machiraju, Raghu; Huang, Kun; Leone, Gustavo

    2017-05-15

    We developed annoPeak, a web application to annotate, visualize and compare predicted protein-binding regions derived from ChIP-seq/ChIP-exo-seq experiments using human and mouse cells. Users can upload peak regions from multiple experiments onto the annoPeak server to annotate them with biological context, identify associated target genes and categorize binding sites with respect to gene structure. Users can also compare multiple binding profiles intuitively with the help of visualization tools and tables provided by annoPeak. In general, annoPeak will help users identify patterns of genome wide transcription factor binding profiles, assess binding profiles in different biological contexts and generate new hypotheses. The web service is freely accessible through URL: http://ccc-annopeak.osumc.edu/annoPeak . Source code is available at https://github.com/XingTang2014/annoPeak . gustavo.leone@osumc.edu or kun.huang@osumc.edu. Supplementary data are available at Bioinformatics online.

  19. Brian Eno Hollandi Festivali peakülaliseks

    Index Scriptorium Estoniae

    1999-01-01

    Inglise helilooja, videokunstnik ja muusikaprodutsent Brian Eno on 5.-26. juunini Amsterdamis toimuva avangardse Hollandi Festivali peakülaline, kelle videoinstallatsioon seatakse üles Stedelijki Muuseumis. Festivali programmist

  20. 1.55 Micron High Peak Power Fiber Amplifier Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this proposal, we propose to demonstrate and build a 1.55 micron single frequency high energy and high peak power fiber amplifier by developing an innovative...

  1. 1.55 Micron High Peak Power Fiber Amplifier Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this proposal, we propose to demonstrate and build a 1.55 micron single frequency high energy and high peak power fiber amplifier by developing an innovative...

  2. Corona discharge ionization of paracetamol molecule: Peak assignment

    Science.gov (United States)

    Bahrami, H.; Farrokhpour, H.

    2015-01-01

    Ionization of paracetamol was investigated using ion mobility spectrometry equipped with a corona discharge ionization source. The measurements were performed in the positive ion mode and three peaks were observed in the ion mobility spectrum. Experimental evidence and theoretical calculations were used to correlate the peaks to related ionic species of paracetamol. Two peaks were attributed to protonated isomers of paracetamol and the other peak was attributed to paracetamol fragment ions formed by dissociation of the N-C bond after protonation of the nitrogen atom. It was observed that three sites of paracetamol compete for protonation and their relative intensities, depending on the sample concentration. The ratio of ion products could be predicted from the internal proton affinity of the protonation sites at each concentration.

  3. Daily peak electricity load forecasting in South Africa using a ...

    African Journals Online (AJOL)

    major source of variation in peak demand forecasting and the inclusion of temperature has a significant ... This definition of electrical demand has its weaknesses. Electrical ..... The coefficient of t is positive, showing a positive linear trend.

  4. Mathematical functions for the representation of chromatographic peaks.

    Science.gov (United States)

    Di Marco, V B; Bombi, G G

    2001-10-05

    About ninety empirical functions for the representation of chromatographic peaks have been collected and tabulated. The table, based on almost 200 references, reports for every function: (1) the most used name; (2) the most convenient equation, with the existence intervals for the adjustable parameters and for the independent variable; (3) the applications; (4) the mathematical properties, in relation to the possible applications. The list includes also equations originally proposed to represent peaks obtained in other analytical techniques (e.g. in spectroscopy), which in many instances have proved useful in representing chromatographic peaks as well; the built-in functions employed in some commercial peak-fitting software packages were included, too. Some of the most important chromatographic functions, i.e. the Exponentially Modified Gaussian, the Poisson, the Log-normal, the Edgeworth/Cramér series and the Gram/Charlier series, have been reviewed and commented in more detail.

  5. Bedrock Geologic Map of the Jay Peak, VT Quadrangle

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital data from VG99-1 Compilation bedrock geologic map of the Jay Peak quadrangle, Compiled by B. Doolan, 1999: VGS Open-File Report VG99-1, 1 plate, scale...

  6. A Second Peak in Diphoton (or Diboson) Resonances

    CERN Document Server

    Carena, Marcela; Ismail, Ahmed; Low, Ian; Shah, Nausheen R; Wagner, Carlos E M

    2016-01-01

    A resonant diphoton peak can be explained by gluon fusion production of a new neutral scalar which subsequently decays into a pair of photons. Loop-induced couplings of the new scalar to gluons and photons should be mediated by particles carrying color and electric charge. We point out that, if the loop particles hadronize before decaying, their bound states will induce a second peak in the diphoton invariant mass spectrum near twice their mass. Using the recently reported 750 GeV excess as a benchmark, we discuss implications of this second peak for resonance searches at the LHC. The second peak could be present for resonances in the $gg$ and $Z\\gamma$ channels, or even in the $WW$ and $ZZ$ channels for a pseudo-scalar resonance, where the couplings are mediated by new loop particles.

  7. Effects of equipment and technique on peak flow measurements

    Directory of Open Access Journals (Sweden)

    O'Driscoll B Ronan

    2006-06-01

    Full Text Available Abstract Background Different lung function equipment and different respiratory manoeuvres may produce different Peak Expiratory Flow (PEF results. Although the PEF is the most common lung function test, there have been few studies of these effects and no previous study has evaluated both factors in a single group of patients. Methods We studied 36 subjects (PEF range 80–570 l/min. All patients recorded PEF measurements using a short rapid expiration following maximal inspiration (PEF technique or a forced maximal expiration to residual volume (FVC technique. Measurements were made using a Wright's peak flow meter, a turbine spirometer and a Fleisch pneumotachograph spirometer. Results The mean PEF was 8.7% higher when the PEF technique was used (compared with FVC technique, p Conclusion Peak flow measurements are affected by the instruction given and by the device and Peak Flow scale used. Patient management decisions should not be based on PEF measurement made on different instruments.

  8. Modeling and forecasting the peak flows of a river

    Directory of Open Access Journals (Sweden)

    Mario Lefebvre

    2002-01-01

    Full Text Available A stochastic model is found for the value of the peak flows of the Mistassibi river in Québec, Canada, when the river is in spate. Next, the objective is to forecast the value of the coming peak flow about four days in advance, when the flow begins to show a marked increase. Both the stochastic model proposed in the paper and a model based on linear regression are used to produce the forecasts. The quality of the forecasts is assessed by considering the standard errors and the peak criterion. The forecasts are much more accurate than those obtained by taking the mean value of the previous peak flows.

  9. Effect of Gymnema inodorum on postprandial peak plasma glucose ...

    African Journals Online (AJOL)

    USER

    2010-02-15

    Feb 15, 2010 ... on peak plasma glucose concentrations in healthy subjects was investigated. ... fasting plasma glucose and liver function test (AST, ALT, GGT and ALP) .... culture medium was measured using an immunoradiometric assay.

  10. Sakste vara: Eesti peaks õppima Poola kogemusest / Helle Kalda

    Index Scriptorium Estoniae

    Kalda, Helle, 1950-

    2009-01-01

    Poolas on jõutud seisukohale, et Poola riik ei pea Saksamaale ümberasunutele vara tagastama. Riigikogu liikme arvates peaks Eesti mitte kandma kulutusi, vaid hoopis küsima Saksamaalt kompensatsiooni seoses baltisakslaste varaga kantavate kulutuste katteks

  11. Desert Peak East Enhanced Geothermal Systems (EGS) Project

    Energy Technology Data Exchange (ETDEWEB)

    Zemach, Ezra [Ormat Technologies Inc., Reno, NV (United States); Drakos, Peter [Ormat Technologies Inc., Reno, NV (United States); Spielman, Paul [Ormat Technologies Inc., Reno, NV (United States); Akerley, John [Ormat Technologies Inc., Reno, NV (United States)

    2013-09-30

    This manuscript is a draft to replaced with a final version at a later date TBD. A summary of activities pertaining to the Desert Peak EGS project including the planning and resulting stimulation activities.

  12. Assessment of flood peak simulations by Global Hydrological Models

    OpenAIRE

    Miller, James; Kjeldsen, Thomas; Prudhomme, Christel

    2011-01-01

    With significant changes to flood frequency anticipated as a result of climate change it becomes important to investigate how global hydrological models process climate forcing data. Flood frequency distribution describes the relationship between flood peak magnitude and its return period, indicating the average period of time between exceedance of a certain flood magnitude. The steepness of the distribution (or of the growth curve) is a measure of the variability of the flood peak series. An...

  13. Double-peak Splitting in High-order Harmonics Generation

    Institute of Scientific and Technical Information of China (English)

    WANG Yingsong; LIU Yaqing; YANG Xiaodong; XU Zhizhan

    2000-01-01

    When the intensity of the driving pulse is much higher than the saturation intensity of the media involved, the double-peak splitting in frequency domain emerges in the generated high-order harmonic spectra. The possible origins of this splitting are carefully investigated. The ionization of the gas media and the propagation effect of harmonic field are the main reason for the double-peak splitting observed.

  14. Generation of narrow peaks in spectroscopy of charged particles

    Science.gov (United States)

    Dubbers, Dirk; Schmidt, Ulrich

    2016-11-01

    In spectroscopy of charged particles, narrow peaks may appear in continuous spectra if magnetic transport of the particles is involved. These artefacts, which so far have escaped the attention of investigators, can develop whenever geometric detection efficiency is less than 100%. As such peaks may be misinterpreted as new physics, their generation is investigated, both analytically and experimentally, for various detector configurations, including those used in searches for the spontaneous decay of the vacuum in heavy-ion collisions.

  15. Evaluation of Peak-Fitting Software for Gamma Spectrum Analysis

    CERN Document Server

    Zahn, Guilherme S; Moralles, Maurício

    2015-01-01

    In all applications of gamma-ray spectroscopy, one of the most important and delicate parts of the data analysis is the fitting of the gamma-ray spectra, where information as the number of counts, the position of the centroid and the width, for instance, are associated with each peak of each spectrum. There's a huge choice of computer programs that perform this type of analysis, and the most commonly used in routine work are the ones that automatically locate and fit the peaks; this fit can be made in several different ways -- the most common ways are to fit a Gaussian function to each peak or simply to integrate the area under the peak, but some software go far beyond and include several small corrections to the simple Gaussian peak function, in order to compensate for secondary effects. In this work several gamma-ray spectroscopy software are compared in the task of finding and fitting the gamma-ray peaks in spectra taken with standard sources of $^{137}$Cs, $^{60}$Co, $^{133}$Ba and $^{152}$Eu. The results...

  16. Peak oil: The four stages of a new idea

    Energy Technology Data Exchange (ETDEWEB)

    Bardi, Ugo [Dipartimento di Chimica, Universita di Firenze, Association for the Study of Peak Oil and Gas (ASPO), Polo Scientifico di Sesto Fiorentino, Via della Lastruccia 3, 50019 Sesto Fiorentino (Fi) (Italy)

    2009-03-15

    The present paper reviews the reactions and the path of acceptance of the theory known as ''peak oil''. The theory was proposed for the first time by M.K. Hubbert in the 1950s as a way to describe the production pattern of crude oil. According to Hubbert, the production curve is ''bell shaped'' and approximately symmetric. Hubbert's theory was verified with good approximation for the case of oil production in the United States that peaked in 1971, and is now being applied to the worldwide oil production. It is generally believed that the global peak of oil production (''peak oil'') will take place during the first decade of the 21st century, and some analysts believe that it has already occurred in 2005 or 2006. The theory and its consequences have unpleasant social and economical implications. The present paper is not aimed at assessing the peak date but offers a discussion on the factors that affect the acceptance and the diffusion of the concept of ''peak oil'' with experts and with the general public. The discussion is based on a subdivision of ''four stages of acceptance'', loosely patterned after a sentence by Thomas Huxley. (author)

  17. Peaking of world oil production: Impacts, mitigation, & risk management

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, R.L. (SAIC); Bezdek, Roger (MISI); Wendling, Robert (MISI)

    2005-02-01

    The peaking of world oil production presents the U.S. and the world with an unprecedented risk management problem. As peaking is approached, liquid fuel prices and price volatility will increase dramatically, and, without timely mitigation, the economic, social, and political costs will be unprecedented. Viable mitigation options exist on both the supply and demand sides, but to have substantial impact, they must be initiated more than a decade in advance of peaking.... The purpose of this analysis was to identify the critical issues surrounding the occurrence and mitigation of world oil production peaking. We simplified many of the complexities in an effort to provide a transparent analysis. Nevertheless, our study is neither simple nor brief. We recognize that when oil prices escalate dramatically, there will be demand and economic impacts that will alter our simplified assumptions. Consideration of those feedbacks will be a daunting task but one that should be undertaken. Our aim in this study is to-- • Summarize the difficulties of oil production forecasting; • Identify the fundamentals that show why world oil production peaking is such a unique challenge; • Show why mitigation will take a decade or more of intense effort; • Examine the potential economic effects of oil peaking; • Describe what might be accomplished under three example mitigation scenarios. • Stimulate serious discussion of the problem, suggest more definitive studies, and engender interest in timely action to mitigate its impacts.

  18. Superoxide dismutase levels and peak expiratory flow in asthmatic children

    Directory of Open Access Journals (Sweden)

    Arie Kurniasih

    2015-09-01

    Full Text Available Background Asthma is a chronic inflammatory process which involve variety of cells such as inflammatory mediators, reactive oxygen species (ROS, and cytokines. The inflammatory process would be exacerbated in the presence of oxidative stress. Superoxide dismutase (SOD is the first important enzyme to protect the respiratory tract against oxidative stress. The decreased of SOD has a correlation with increased of airway obstruction and bronchospasm. Objective To assess for a correlation between superoxide dismutase (SOD levels and peak expiratory flow, as well as to determine the impact of SOD levels for predicting asthma attacks. Methods We conducted a prospective cohort study at Dr. Sardjito Hospital, Yogyakarta, between February and April 2011 involving asthmatic children aged 5-18 years. Subjects’ serum SOD levels and peak expiratory flow were measured at the same time point. We then performed a prospective study following up on the same subjects to find out if they had a recurrent asthma attack within one month of the tests. We also reassessed their peak expiratory flow one month after blood specimens were obtained. Results Thirty-nine patients were enrolled in this study. There was no significant correlation between SOD level and peak expiratory flow [r=0.289; 95%CI -0.025 to 0.47; P=0.074]. However, older age was significantly associated with higher peak expiratory flow (=0.5; 95%CI 3.10 to 11.57; P=0.01. Lower levels of SOD increased the risk of asthma attacks in a month following the initial measurements (RR=5.5; 95%CI 1.6 to 18.9; P=0.009. Conclusion Superoxide dismutase (SOD level is not significantly associated with peak expiratory flow. However, we find a relationship between older age and higher peak expiratory flow and a relationship between lower SOD levels and risk of asthma attacks within one month following the tests.

  19. Poor compensatory hyperventilation in morbidly obese women at peak exercise.

    Science.gov (United States)

    Zavorsky, Gerald S; Murias, Juan M; Kim, Do Jun; Gow, Jennifer; Christou, Nicolas V

    2007-11-15

    This study was designed to compare differences in pulmonary gas exchange at rest and at peak exercise in two groups of women: (1) physically active, non-obese women and (2) women with morbid obesity. Fourteen morbidly obese women (body mass index or BMI=49+/-7 kg/m2; peak oxygen consumption or VO2 peak=14+/-2 ml/(kg min)) and 14 physically active non-obese women (BMI=22+/-2 kg/m2; VO2 peak=50+/-6 ml/(kg min)) performed an incremental, ramped exercise test to exhaustion on a cycle ergometer. Arterial blood was sampled at rest and at peak exercise. At rest, the alveolar to arterial oxygen partial pressure difference was 3x higher in the obese women (14+/-10 mmHg) compared to non-obese women (5+/-4 mmHg). Arterial carbon dioxide pressure (PaCO2) was identical in both groups at rest (37+/-4 mmHg). Only the non-obese women showed a decrease in PaCO2 rest to peak exercise (-5+/-3 mmHg). The slope between heart rate and VO2 during exercise was higher in the morbidly obese compared to non-obese women indicating that for the same absolute increase in VO2 a larger increase in heart rate is needed, demonstrating poorer cardiac efficiency in obese women. In conclusion, morbidly obese women have poorer exercise capacity, cardiac efficiency, and compensatory hyperventilation at peak exercise, and poorer gas exchange at rest compared to physically active, non-obese women.

  20. Analysis of Peak-to-Peak Current Ripple Amplitude in Seven-Phase PWM Voltage Source Inverters

    Directory of Open Access Journals (Sweden)

    Gabriele Grandi

    2013-08-01

    Full Text Available Multiphase systems are nowadays considered for various industrial applications. Numerous pulse width modulation (PWM schemes for multiphase voltage source inverters with sinusoidal outputs have been developed, but no detailed analysis of the impact of these modulation schemes on the output peak-to-peak current ripple amplitude has been reported. Determination of current ripple in multiphase PWM voltage source inverters is important for both design and control purposes. This paper gives the complete analysis of the peak-to-peak current ripple distribution over a fundamental period for multiphase inverters, with particular reference to seven-phase VSIs. In particular, peak-to-peak current ripple amplitude is analytically determined as a function of the modulation index, and a simplified expression to get its maximum value is carried out. Although reference is made to the centered symmetrical PWM, being the most simple and effective solution to maximize the DC bus utilization, leading to a nearly-optimal modulation to minimize the RMS of the current ripple, the analysis can be readily extended to either discontinuous or asymmetrical modulations, both carrier-based and space vector PWM. A similar approach can be usefully applied to any phase number. The analytical developments for all different sub-cases are verified by numerical simulations.

  1. Energy Saving by Chopping off Peak Demand Using Day Light

    Directory of Open Access Journals (Sweden)

    Ashok Kumar Maitra

    2011-08-01

    Full Text Available An artificial intelligent technique has been implemented in this research using real time datas to calculate how much energy can be chopped from peak load demand. The results are based on real time data that are taken from power delivering centers. These datas do reflect the present condition of power and a solution to those critical conditions during the peak period. These are done in such a way such that helps in judicious scheduling of load. The time based load scheduling has been done so as to understand the basic criteria for solving power crisis during morning peak and early evening peak. The sunray availability and percentage of load that will use day light saving (DLS technique has been taken into account in this work. The results shows that about 0.5% to 1% of load can be shedded off from the peak load period which otherwise is reduction of power. Thus it otherwise also means that an equivalent amount of energy is saved which amounts to a large saving of national money. This result is obtained on monthly and even daily basis. Thus this paper justifies DLS gives a new renewable technique to save energy.

  2. Variable threshold method for ECG R-peak detection.

    Science.gov (United States)

    Kew, Hsein-Ping; Jeong, Do-Un

    2011-10-01

    In this paper, a wearable belt-type ECG electrode worn around the chest by measuring the real-time ECG is produced in order to minimize the inconvenient in wearing. ECG signal is detected using a potential instrument system. The measured ECG signal is transmits via an ultra low power consumption wireless data communications unit to personal computer using Zigbee-compatible wireless sensor node. ECG signals carry a lot of clinical information for a cardiologist especially the R-peak detection in ECG. R-peak detection generally uses the threshold value which is fixed. There will be errors in peak detection when the baseline changes due to motion artifacts and signal size changes. Preprocessing process which includes differentiation process and Hilbert transform is used as signal preprocessing algorithm. Thereafter, variable threshold method is used to detect the R-peak which is more accurate and efficient than fixed threshold value method. R-peak detection using MIT-BIH databases and Long Term Real-Time ECG is performed in this research in order to evaluate the performance analysis.

  3. Pediatric Exercise Testing: Value and Implications of Peak Oxygen Uptake

    Directory of Open Access Journals (Sweden)

    Paolo T. Pianosi

    2017-01-01

    Full Text Available Peak oxygen uptake (peak V ˙ O 2 measured by clinical exercise testing is the benchmark for aerobic fitness. Aerobic fitness, estimated from maximal treadmill exercise, is a predictor of mortality in adults. Peak V ˙ O 2 was shown to predict longevity in patients aged 7–35 years with cystic fibrosis over 25 years ago. A surge of exercise studies in young adults with congenital heart disease over the past decade has revealed significant prognostic information. Three years ago, the first clinical trial in children with pulmonary arterial hypertension used peak V ˙ O 2 as an endpoint that likewise delivered clinically relevant data. Cardiopulmonary exercise testing provides clinicians with biomarkers and clinical outcomes, and researchers with novel insights into fundamental biological mechanisms reflecting an integrated physiological response hidden at rest. Momentum from these pioneering observations in multiple disease states should impel clinicians to employ similar methods in other patient populations; e.g., sickle cell disease. Advances in pediatric exercise science will elucidate new pathways that may identify novel biomarkers. Our initial aim of this essay is to highlight the clinical relevance of exercise testing to determine peak V ˙ O 2 , and thereby convince clinicians of its merit, stimulating future clinical investigators to broaden the application of exercise testing in pediatrics.

  4. Rotational and peak torque stiffness of rugby shoes.

    Science.gov (United States)

    Ballal, Moez S; Usuelli, Federico Giuseppe; Montrasio, Umberto Alfieri; Molloy, Andy; La Barbera, Luigi; Villa, Tomaso; Banfi, Giuseppe

    2014-09-01

    Sports people always strive to avoid injury. Sports shoe designs in many sports have been shown to affect traction and injury rates. The aim of this study is to demonstrate the differing stiffness and torque in rugby boots that are designed for the same effect. Five different types of rugby shoes commonly worn by scrum forwards were laboratory tested for rotational stiffness and peak torque on a natural playing surface generating force patterns that would be consistent with a rugby scrum. The overall internal rotation peak torque was 57.75±6.26 Nm while that of external rotation was 56.55±4.36 Nm. The Peak internal and external rotational stiffness were 0.696±0.1 and 0.708±0.06 Nm/deg respectively. Our results, when compared to rotational stiffness and peak torques of football shoes published in the literature, show that shoes worn by rugby players exert higher rotational and peak torque stiffness compared to football shoes when tested on the same natural surfaces. There was significant difference between the tested rugby shoes brands. In our opinion, to maximize potential performance and lower the potential of non-contact injury, care should be taken in choosing boots with stiffness appropriate to the players main playing role. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Pediatric Exercise Testing: Value and Implications of Peak Oxygen Uptake.

    Science.gov (United States)

    Pianosi, Paolo T; Liem, Robert I; McMurray, Robert G; Cerny, Frank J; Falk, Bareket; Kemper, Han C G

    2017-01-24

    Peak oxygen uptake (peak V ˙ O 2 ) measured by clinical exercise testing is the benchmark for aerobic fitness. Aerobic fitness, estimated from maximal treadmill exercise, is a predictor of mortality in adults. Peak V ˙ O 2 was shown to predict longevity in patients aged 7-35 years with cystic fibrosis over 25 years ago. A surge of exercise studies in young adults with congenital heart disease over the past decade has revealed significant prognostic information. Three years ago, the first clinical trial in children with pulmonary arterial hypertension used peak V ˙ O 2 as an endpoint that likewise delivered clinically relevant data. Cardiopulmonary exercise testing provides clinicians with biomarkers and clinical outcomes, and researchers with novel insights into fundamental biological mechanisms reflecting an integrated physiological response hidden at rest. Momentum from these pioneering observations in multiple disease states should impel clinicians to employ similar methods in other patient populations; e.g., sickle cell disease. Advances in pediatric exercise science will elucidate new pathways that may identify novel biomarkers. Our initial aim of this essay is to highlight the clinical relevance of exercise testing to determine peak V ˙ O 2 , and thereby convince clinicians of its merit, stimulating future clinical investigators to broaden the application of exercise testing in pediatrics.

  6. Peak alignment using wavelet pattern matching and differential evolution.

    Science.gov (United States)

    Zhang, Zhi-Min; Chen, Shan; Liang, Yi-Zeng

    2011-01-30

    Retention time shifts badly impair qualitative or quantitative results of chemometric analyses when entire chromatographic data are used. Hence, chromatograms should be aligned to perform further analysis. Being inspired and motivated by this purpose, a practical and handy peak alignment method (alignDE) is proposed, implemented in this research for one-way chromatograms, which basically consists of five steps: (1) chromatogram lengths equalization using linear interpolation; (2) accurate peak pattern matching by continuous wavelet transform (CWT) with the Mexican Hat and Haar wavelets as its mother wavelets; (3) flexible baseline fitting utilizing penalized least squares; (4) peak clustering when gap of two peaks is smaller than a certain threshold; (5) peak alignment using differential evolution (DE) to maximize linear correlation coefficient between reference signal and signal to be aligned. This method is demonstrated with both simulated chromatograms and real chromatograms, for example, chromatograms of fungal extracts and Red Peony Root obtained by HPLC-DAD. It is implemented in R language and available as open source software to a broad range of chromatograph users (http://code.google.com/p/alignde).

  7. An online peak extraction algorithm for ion mobility spectrometry data.

    Science.gov (United States)

    Kopczynski, Dominik; Rahmann, Sven

    2015-01-01

    Ion mobility (IM) spectrometry (IMS), coupled with multi-capillary columns (MCCs), has been gaining importance for biotechnological and medical applications because of its ability to detect and quantify volatile organic compounds (VOC) at low concentrations in the air or in exhaled breath at ambient pressure and temperature. Ongoing miniaturization of spectrometers creates the need for reliable data analysis on-the-fly in small embedded low-power devices. We present the first fully automated online peak extraction method for MCC/IMS measurements consisting of several thousand individual spectra. Each individual spectrum is processed as it arrives, removing the need to store the measurement before starting the analysis, as is currently the state of the art. Thus the analysis device can be an inexpensive low-power system such as the Raspberry Pi. The key idea is to extract one-dimensional peak models (with four parameters) from each spectrum and then merge these into peak chains and finally two-dimensional peak models. We describe the different algorithmic steps in detail and evaluate the online method against state-of-the-art peak extraction methods.

  8. Non-Gaussian bias: insights from discrete density peaks

    CERN Document Server

    Desjacques, Vincent; Riotto, Antonio

    2013-01-01

    Corrections induced by primordial non-Gaussianity to the linear halo bias can be computed from a peak-background split or the widespread local bias model. However, numerical simulations clearly support the prediction of the former, in which the non-Gaussian amplitude is proportional to the linear halo bias. To understand better the reasons behind the failure of standard Lagrangian local bias, in which the halo overdensity is a function of the local mass overdensity only, we explore the effect of a primordial bispectrum on the 2-point correlation of discrete density peaks. We show that the effective local bias expansion to peak clustering vastly simplifies the calculation. We generalize this approach to excursion set peaks and demonstrate that the resulting non-Gaussian amplitude, which is a weighted sum of quadratic bias factors, precisely agrees with the peak-background split expectation, which is a logarithmic derivative of the halo mass function with respect to the normalisation amplitude. We point out tha...

  9. Group Elevator Peak Scheduling Based on Robust Optimization Model

    Directory of Open Access Journals (Sweden)

    ZHANG, J.

    2013-08-01

    Full Text Available Scheduling of Elevator Group Control System (EGCS is a typical combinatorial optimization problem. Uncertain group scheduling under peak traffic flows has become a research focus and difficulty recently. RO (Robust Optimization method is a novel and effective way to deal with uncertain scheduling problem. In this paper, a peak scheduling method based on RO model for multi-elevator system is proposed. The method is immune to the uncertainty of peak traffic flows, optimal scheduling is realized without getting exact numbers of each calling floor's waiting passengers. Specifically, energy-saving oriented multi-objective scheduling price is proposed, RO uncertain peak scheduling model is built to minimize the price. Because RO uncertain model could not be solved directly, RO uncertain model is transformed to RO certain model by elevator scheduling robust counterparts. Because solution space of elevator scheduling is enormous, to solve RO certain model in short time, ant colony solving algorithm for elevator scheduling is proposed. Based on the algorithm, optimal scheduling solutions are found quickly, and group elevators are scheduled according to the solutions. Simulation results show the method could improve scheduling performances effectively in peak pattern. Group elevators' efficient operation is realized by the RO scheduling method.

  10. Analysis of the Magnitude and Frequency of Peak Discharge and Maximum Observed Peak Discharge in New Mexico and Surrounding Areas

    Science.gov (United States)

    Waltemeyer, Scott D.

    2008-01-01

    Estimates of the magnitude and frequency of peak discharges are necessary for the reliable design of bridges, culverts, and open-channel hydraulic analysis, and for flood-hazard mapping in New Mexico and surrounding areas. The U.S. Geological Survey, in cooperation with the New Mexico Department of Transportation, updated estimates of peak-discharge magnitude for gaging stations in the region and updated regional equations for estimation of peak discharge and frequency at ungaged sites. Equations were developed for estimating the magnitude of peak discharges for recurrence intervals of 2, 5, 10, 25, 50, 100, and 500 years at ungaged sites by use of data collected through 2004 for 293 gaging stations on unregulated streams that have 10 or more years of record. Peak discharges for selected recurrence intervals were determined at gaging stations by fitting observed data to a log-Pearson Type III distribution with adjustments for a low-discharge threshold and a zero skew coefficient. A low-discharge threshold was applied to frequency analysis of 140 of the 293 gaging stations. This application provides an improved fit of the log-Pearson Type III frequency distribution. Use of the low-discharge threshold generally eliminated the peak discharge by having a recurrence interval of less than 1.4 years in the probability-density function. Within each of the nine regions, logarithms of the maximum peak discharges for selected recurrence intervals were related to logarithms of basin and climatic characteristics by using stepwise ordinary least-squares regression techniques for exploratory data analysis. Generalized least-squares regression techniques, an improved regression procedure that accounts for time and spatial sampling errors, then were applied to the same data used in the ordinary least-squares regression analyses. The average standard error of prediction, which includes average sampling error and average standard error of regression, ranged from 38 to 93 percent

  11. Pre-Peak and Post-Peak Rock Strain Characteristics During Uniaxial Compression by 3D Digital Image Correlation

    Science.gov (United States)

    Munoz, H.; Taheri, A.; Chanda, E. K.

    2016-07-01

    A non-contact optical method for strain measurement applying three-dimensional digital image correlation (3D DIC) in uniaxial compression is presented. A series of monotonic uniaxial compression tests under quasi-static loading conditions on Hawkesbury sandstone specimens were conducted. A prescribed constant lateral-strain rate to control the applied axial load in a closed-loop system allowed capturing the complete stress-strain behaviour of the rock, i.e. the pre-peak and post-peak stress-strain regimes. 3D DIC uses two digital cameras to acquire images of the undeformed and deformed shape of an object to perform image analysis and provides deformation and motion measurements. Observations showed that 3D DIC provides strains free from bedding error in contrast to strains from LVDT. Erroneous measurements due to the compliance of the compressive machine are also eliminated. Furthermore, by 3D DIC technique relatively large strains developed in the post-peak regime, in particular within localised zones, difficult to capture by bonded strain gauges, can be measured in a straight forward manner. Field of strains and eventual strain localisation in the rock surface were analysed by 3D DIC method, coupled with the respective stress levels in the rock. Field strain development in the rock samples, both in axial and shear strain domains suggested that strain localisation takes place progressively and develops at a lower rate in pre-peak regime. It is accelerated, otherwise, in post-peak regime associated with the increasing rate of strength degradation. The results show that a major failure plane, due to strain localisation, becomes noticeable only long after the peak stress took place. In addition, post-peak stress-strain behaviour was observed to be either in a form of localised strain in a shearing zone or inelastic unloading outside of the shearing zone.

  12. Maximizing utilization of sport halls during peak hours

    DEFF Research Database (Denmark)

    Iversen, Evald Bundgård; Forsberg, Peter

    the number of participants 7.5 persons higher pr. activity compared to club activities. This implies that clubs during peak hours could include more participants. Another possibility to increase utilization is if the management of sport facilities forced sport clubs and other organisers to adapt......BACKGROUNDDuring peak hours (4.30pm-8pm) demand for timeslots in sport halls in Denmark are high and there are few timeslots available. Further, focus on how public resources are spent most efficient is increasing (Iversen, 2013). This makes it interesting to analyse how utilization could...... be increased during peak hours. DATA AND METHODOLOGYData is collected by observation of activities during two weeks on for example whether halls are used or not; the amount of playing field used; and number of participants (Iversen, 2012). Data on 1.331 activities in 36 sport halls across 4 municipalities have...

  13. The Peak/Dip Picture of the Cosmic Web

    Science.gov (United States)

    Rossi, Graziano

    2016-10-01

    The initial shear field plays a central role in the formation of large-scale structures, and in shaping the geometry, morphology, and topology of the cosmic web. We discuss a recent theoretical framework for the shear tensor, termed the `peak/dip picture', which accounts for the fact that halos/voids may form from local extrema of the density field - rather than from random spatial positions; the standard Doroshkevich's formalism is generalized, to include correlations between the density Hessian and shear field at special points in space around which halos/voids may form. We then present the `peak/dip excursion-set-based' algorithm, along with its most recent applications - merging peaks theory with the standard excursion set approach.

  14. The structure of Doppler peaks induced by active perturbations

    CERN Document Server

    Magueijo, J; Ferreira, P; Coulson, D; Magueijo, Joao; Albrecht, Andreas; Ferreira, Pedro; Coulson, David

    1996-01-01

    We investigate how the qualitative structure of Doppler peaks in the angular power spectrum of the cosmic microwave anisotropy is affected by basic assumptions going into theories of structure formation. We define the concepts of ``coherent'' and ``incoherent'' fluctuations, and also of ``active'' and ``passive'' fluctuations. In these terms inflationary fluctuations are passive and coherent while topological defects are active incoherent fluctuations. Causality and scale invariance are shown to have different implementations in theories differing in the above senses. We then extend the formalism of Hu and Sugiyama to treat models with cosmic defects. Using this formalism we show that the existence or absence of secondary Doppler peaks and the rough placing of the primary peak are very sensitive to the fundamental properties defined. We claim therefore that even a rough measurement of the angular power spectrum C_l shape at 100

  15. Weak Lensing Peak Finding: Estimators, Filters, and Biases

    CERN Document Server

    Schmidt, Fabian

    2010-01-01

    Large catalogs of shear-selected peaks have recently become a reality. In order to properly interpret the abundance and properties of these peaks, it is necessary to take into account the effects of the clustering of source galaxies, among themselves and with the lens. In addition, the preferred selection of lensed galaxies in a flux- and size-limited sample leads to fluctuations in the apparent source density which correlate with the lensing field (lensing bias). In this paper, we investigate these issues for two different choices of shear estimators which are commonly in use today: globally-normalized and locally-normalized estimators. While in principle equivalent, in practice these estimators respond differently to systematic effects such as lensing bias and cluster member dilution. Furthermore, we find that which estimator is statistically superior depends on the specific shape of the filter employed for peak finding; suboptimal choices of the estimator+filter combination can result in a suppression of t...

  16. Mercer County off-peak fare-free bus demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Dommasch, I.N.; Hollinger, R.L.

    1979-07-01

    A system-wide, off-peak fare-free bus demonstration project is being conducted in Mercer County, New Jersey to study effects of fare-free bus operation. Data collected for 2 1/2 months of operation are presented. Since implementation of the fare-free service, Mercer Metro off-peak ridership has increased approximately 45 to 50%. This equates to an overall system-wide ridership increase of about 10 to 15%. One effect of the fare-free operation has been to increase bus run times, caused in part by accompanying increases in the occurrence and length of bus delays in the downtown area. The percentage of filled bus seats has changed from about 10% before the demonstration, to over 50% after the off-peak fares were eliminated.

  17. The Peak Pairs algorithm for strain mapping from HRTEM images

    Energy Technology Data Exchange (ETDEWEB)

    Galindo, Pedro L. [Departamento de Lenguajes y Sistemas Informaticos, CASEM, Universidad de Cadiz, Pol. Rio San Pedro s/n. 11510, Puerto Real, Cadiz (Spain)], E-mail: pedro.galindo@uca.es; Kret, Slawomir [Institute of Physics, PAS, AL. Lotnikow 32/46, 02-668 Warsaw (Poland); Sanchez, Ana M. [Departamento de Ciencia de los Materiales e Ing. Metalurgica y Q. Inorganica, Facultad de Ciencias, Universidad de Cadiz, Pol. Rio San Pedro s/n. 11510, Puerto Real, Cadiz (Spain); Laval, Jean-Yves [Laboratoire de Physique du Solide, UPR5 CNRS-ESPCI, Paris (France); Yanez, Andres; Pizarro, Joaquin; Guerrero, Elisa [Departamento de Lenguajes y Sistemas Informaticos, CASEM, Universidad de Cadiz, Pol. Rio San Pedro s/n. 11510, Puerto Real, Cadiz (Spain); Ben, Teresa; Molina, Sergio I. [Departamento de Ciencia de los Materiales e Ing. Metalurgica y Q. Inorganica, Facultad de Ciencias, Universidad de Cadiz, Pol. Rio San Pedro s/n. 11510, Puerto Real, Cadiz (Spain)

    2007-11-15

    Strain mapping is defined as a numerical image-processing technique that measures the local shifts of image details around a crystal defect with respect to the ideal, defect-free, positions in the bulk. Algorithms to map elastic strains from high-resolution transmission electron microscopy (HRTEM) images may be classified into two categories: those based on the detection of peaks of intensity in real space and the Geometric Phase approach, calculated in Fourier space. In this paper, we discuss both categories and propose an alternative real space algorithm (Peak Pairs) based on the detection of pairs of intensity maxima in an affine transformed space dependent on the reference area. In spite of the fact that it is a real space approach, the Peak Pairs algorithm exhibits good behaviour at heavily distorted defect cores, e.g. interfaces and dislocations. Quantitative results are reported from experiments to determine local strain in different types of semiconductor heterostructures.

  18. COPAR: A ChIP-Seq Optimal Peak Analyzer

    Directory of Open Access Journals (Sweden)

    Binhua Tang

    2017-01-01

    Full Text Available Sequencing data quality and peak alignment efficiency of ChIP-sequencing profiles are directly related to the reliability and reproducibility of NGS experiments. Till now, there is no tool specifically designed for optimal peak alignment estimation and quality-related genomic feature extraction for ChIP-sequencing profiles. We developed open-sourced COPAR, a user-friendly package, to statistically investigate, quantify, and visualize the optimal peak alignment and inherent genomic features using ChIP-seq data from NGS experiments. It provides a versatile perspective for biologists to perform quality-check for high-throughput experiments and optimize their experiment design. The package COPAR can process mapped ChIP-seq read file in BED format and output statistically sound results for multiple high-throughput experiments. Together with three public ChIP-seq data sets verified with the developed package, we have deposited COPAR on GitHub under a GNU GPL license.

  19. Correlation Filter Learning Toward Peak Strength for Visual Tracking.

    Science.gov (United States)

    Sui, Yao; Wang, Guanghui; Zhang, Li

    2017-04-13

    This paper presents a novel visual tracking approach to correlation filter learning toward peak strength of correlation response. Previous methods leverage all features of the target and the immediate background to learn a correlation filter. Some features, however, may be distractive to tracking, like those from occlusion and local deformation, resulting in unstable tracking performance. This paper aims at solving this issue and proposes a novel algorithm to learn the correlation filter. The proposed approach, by imposing an elastic net constraint on the filter, can adaptively eliminate those distractive features in the correlation filtering. A new peak strength metric is proposed to measure the discriminative capability of the learned correlation filter. It is demonstrated that the proposed approach effectively strengthens the peak of the correlation response, leading to more discriminative performance than previous methods. Extensive experiments on a challenging visual tracking benchmark demonstrate that the proposed tracker outperforms most state-of-the-art methods.

  20. Peaks in the Cosmic Microwave Background flat versus open models

    CERN Document Server

    Barreiro, R B; Martínez-González, E; Cayon, L; Silk, J; Silk, Joseph

    1996-01-01

    We present properties of the peaks (maxima) of the CMB anisotropies expected in flat and open CDM models. We obtain analytical expressions of several topological descriptors: mean number of maxima and the probability distribution of the gaussian curvature and the eccentricity of the peaks. These quantities are calculated as functions of the radiation power spectrum, assuming a gaussian distribution of temperature anisotropies. We present results for angular resolutions ranging from 5' to 20' (antenna FWHM), scales that are relevant for the MAP and COBRAS/SAMBA space missions and the ground-based interferometer experiments. Our analysis also includes the effects of noise. We find that the number of peaks can discriminate between standard CDM models, and that the gaussian curvature distribution provides a useful test for these various models, whereas the eccentricity distribution can not distinguish between them.

  1. Is the baryon acoustic oscillation peak a cosmological standard ruler?

    CERN Document Server

    Roukema, Boudewijn F; Fujii, Hirokazu; Ostrowski, Jan J

    2016-01-01

    In the standard model of cosmology, the Universe is static in comoving coordinates; expansion occurs homogeneously and is represented by a global scale factor. The baryon acoustic oscillation (BAO) peak location is a statistical tracer that represents, in the standard model, a fixed comoving-length standard ruler. Recent gravitational collapse should modify the metric, rendering the effective scale factor, and thus the BAO standard ruler, spatially inhomogeneous. Using the Sloan Digital Sky Survey, we show to high significance (P < 0.001) that the spatial compression of the BAO peak location increases as the spatial paths' overlap with superclusters increases. Detailed observational and theoretical calibration of this BAO peak location environment dependence will be needed when interpreting the next decade's cosmological surveys.

  2. Zero-bias peak splitting in InSb nanowires

    Science.gov (United States)

    Chen, Jun; Yu, Peng; Hocevar, Moïra; Plissard, Sébastien; Car, Diana; Bakkers, Erik; Frolov, Sergey

    2015-03-01

    Zero-bias conductance peak(ZBP) has been reported as a signature of Majorana fermions in InSb nanowires. Other features like ZBP phase diagram in chemical potential vs magnetic field and peak splitting are proposed as additional evidences of Majorana fermions. We make superconductor-InSb nanowire hybrid devices with the aim of exploring these features and beyond. By means of high-k HfOx as the dielectric layer, we obtain large gate-tunability of chemical potential, which may enable us to map out ZBP phase diagram. Here we report observation of ZBP at finite magnetic field. Such peak is tunable with gates underneath the superconductor. In particular, it splits and merges again as a function of the center gate. We study such splitting in the context of a pair of coupled Majorana bound states.

  3. Fe-peak element abundances in disk and halo stars

    CERN Document Server

    Bergemann, Maria

    2009-01-01

    At present none of Galactic chemical evolution (GCE) models provides a self-consistent description of observed trends for all iron-peak elements with metallicity simultaneously. The question is whether the discrepancy is due to deficiencies of GCE models, such as stellar yields, or due to erroneous spectroscopically-determined abundances of these elements in metal-poor stars. The present work aims at a critical reevaluation of the abundance trends for several odd and even-Z Fe-peak elements, which are important for understanding explosive nucleosynthesis in supernovae.

  4. Copernicus crater central peak - Lunar mountain of unique composition

    Science.gov (United States)

    Pieters, C. M.

    1982-01-01

    Olivine is identified as the major mafic mineral in a central peak of Copernicus crater. Information on the mineral assemblages of such unsampled lunar surface material is provided by near infrared reflectance spectra (0.7 to 2.5 micrometers) obtained with earth-based telescopes. The composition of the deep-seated material comprising the Copernicus central peak is unique among measured areas. Other lunar terra areas and the wall of Copernicus exhibit spectral characteristics of mineral assemblages comparable to the feldspathic breccias returned by the Apollo missions, with low-calcium orthopyroxene being the major mafic mineral.

  5. Peak Oil and the Everyday Complexity of Human Progress Narratives

    Directory of Open Access Journals (Sweden)

    John C. Pruit

    2012-11-01

    Full Text Available The “big” story of human progress has polarizing tendencies featuring the binary options of progress or decline. I consider human progress narratives in the context of everyday life. Analysis of the “little” stories from two narrative environments focusing on peak oil offers a more complex picture of the meaning and contours of the narrative. I consider the impact of differential blog site commitments to peak oil perspectives and identify five narrative types culled from two narrative dimensions. I argue that the lived experience complicates human progress narratives, which is no longer an either/or proposition.

  6. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This multisectioned three-Volume report is responsive to the requirements of Contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program of computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. This section of volume III contains appendixes of information on load shedding determination, analysis, socio-economic study, contractual cross references, and definitions.

  7. Thermal conductivity peaks in old and new ceramic superconductors

    Science.gov (United States)

    Williams, Wendell S.

    1993-07-01

    A sharp peak in the thermal conductivity curve of high Tc ceramic superconductors below Tc found by many workers is compared with a similar but even larger effect found earlier for niobium carbide — an older ceramic superconductor — by Radosevich and Williams. The interpretation of this peak given in the literature for the high Tc materials — reduced phonon-electron scattering below Tc as the superconducting energy gap opens — is the same as that established earlier for niobium carbide, which can be treated by BCS/BRT theory, thus lending support to this view. The role of point defects (vacancies) in both materials is also emphasized.

  8. New explanation of Raman peak redshift in nanoparticles

    Science.gov (United States)

    Meilakhs, A. P.; Koniakhin, S. V.

    2017-10-01

    In this letter, we propose a new model that explains the Raman peak downshift observed in nanoparticles with respect to bulk materials. The proposed model takes into account discreteness of the vibrational spectra of nanoparticles. For crystals with a cubic lattice (Diamond, Silicon, Germanium) we give a relation between the displacement of Raman peak position and the size of nanoparticles. The proposed model does not include any uncertain parameters, unlike the conventionally used phonon confinement model (PCM), and can be employed for unambiguous nanoparticles size estimation.

  9. Peak metamorphic temperatures from cation diffusion zoning in garnet

    DEFF Research Database (Denmark)

    Smit, Matthijs Arjen; Scherer, Erik; Mezger, Klaus

    2013-01-01

    A model that relates the characteristic diffusion length and average cooling rate to peak temperature was developed for chemical diffusion in spherical geometries on the basis of geospeedometry principles and diffusion theory. The model is quantitatively evaluated for cation diffusion profiles in...... is robust and provides a reliable means of estimating peak temperatures for different types of high-grade metamorphic rock. The tool could be of particular advantage in rocks where critical assemblages for conventional thermometry do not occur or have been replaced during retrogression....

  10. Peak heart rate decreases with increasing severity of acute hypoxia

    DEFF Research Database (Denmark)

    Lundby, C; Araoz, M; Van Hall, Gerrit

    2001-01-01

    The purpose of the present study was to investigate the degree to which peak heart rate is reduced during exhaustive exercise in acute hypoxia. Five sea-level lowlanders performed maximal exercise at normobaric normoxia and at three different levels of hypobaric hypoxia (barometric pressures of 518......, 459, and 404 mmHg) in a hypobaric chamber and while breathing 9% O(2) in N(2). These conditions were equivalent to altitudes of 3300, 4300, 5300, and 6300 m above sea level, respectively. At 4300 m, maximal exercise was also repeated after 4 and 8 h. Peak heart rate (HR) decreased from 191 (182...

  11. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This three-volume report is responsive to the requirements of contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program for computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. The report consists of the following three volumes: Volume I: management overview; Volume II: methodology and technology; and Volume III; appendices.

  12. National energy peak leveling program (NEPLP). Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This three-volume report is responsive to the requirements of Contract E (04-3)-1152 to provide a detailed methodology, to include management, technology, and socio-economic aspects, of a voluntary community program of computer-assisted peak load leveling and energy conservation in commercial community facilities. The demonstration project established proof-of-concept in reducing the kW-demand peak by the unofficial goal of 10%, with concurrent kWh savings. This section of the three volume report is a final report appendix with information on the financial management of load leveling, audit procedures, and building operating profiles.

  13. Quasispecies evolution on a fitness landscape with a fluctuating peak

    Science.gov (United States)

    Nilsson, Martin; Snoad, Nigel

    2002-03-01

    A quasispecies evolving on a fitness landscape with a single peak of fluctuating height is studied. In the approximation that back mutations can be ignored, the rate equations can be solved analytically. It is shown that the error threshold on this class of dynamic landscapes is defined by the time average of the selection pressure. In the case of a periodically fluctuating fitness peak, we also study the phase shift and response amplitude of the previously documented low-pass filter effect. The special case of a small harmonic fluctuation is treated analytically.

  14. Impact Melt Cover on Central Peaks of Complex Craters: Implications for Deriving Crustal Composition

    Science.gov (United States)

    Dhingra, D.; Pieters, C. M.

    2017-05-01

    The use of impact crater central peaks for deriving crustal mineralogy at depth assumes pristine nature of the peaks. Impact melt on several central peaks is evidence for contamination. Central-peaks-derived crustal mineralogy may be affected.

  15. Standardization of I-125. Sum-Peak Coincidence Counting

    Energy Technology Data Exchange (ETDEWEB)

    Grau Carles, A.; Grau Malonda, A.

    2011-07-01

    I-125 is a nuclide which presents difficulties for standardization. The sum-peak method is one of the procedures used to standardize this radionuclide. Initially NaI (Tl)detectors and then the semiconductor detectors with higher resolution have been used.This paper describes the different methods based on the sum-peak procedure and the different expressions used to calculate the activity are deduced. We describe a general procedure for obtaining all of the above equations and many more. We analyze the influence of uncertainties in the used parameters in the uncertainty of the activity. We give a complete example of the transmission of uncertainty and the effects of correlations in the uncertainty of the activity of the sample. High-resolution spectra show an unresolved doublet of 62.0 keV and 62.8 keV. The paper presents two approaches to solve this problem. One is based on the calculation of area ratio and the sum of peak areas obtained from atomic and nuclear data, in the other we modify the equations so that the sum of the peak areas doublet, rather than its components, is present. (Author) 19 refs.

  16. After Cotton Prices Hit a 10-Year Peak...

    Institute of Scientific and Technical Information of China (English)

    Wang Zhaofeng

    2010-01-01

    @@ "With the fifth-grade seed cotton being priced at 4.5 yuan per 500 grams and Xinjiang lint cotton at nearly RMB 20,000 per ton, cotton prices have rocketed to a 10-year peak," Gap Chaoshan, President of the Liaocheng Cotton Association, told the reporter on September 26.

  17. Extreme value statistics of weak lensing shear peak counts

    CERN Document Server

    Reischke, Robert; Bartelmann, Matthias

    2015-01-01

    The statistics of peaks in weak gravitational lensing maps is a promising technique to constrain cosmological parameters in present and future surveys. Here we investigate its power when using general extreme value statistics which is very sensitive to the exponential tail of the halo mass function. To this end, we use an analytic method to quantify the number of weak lensing peaks caused by galaxy clusters, large-scale structures and observational noise. Doing so, we further improve the method in the regime of high signal-to-noise ratios dominated by non-linear structures by accounting for the embedding of those counts into the surrounding shear caused by large scale structures. We derive the extreme value and order statistics for both over-densities (positive peaks) and under-densities (negative peaks) and provide an optimized criterion to split a wide field survey into sub-fields in order to sample the distribution of extreme values such that the expected objects causing the largest signals are mostly due ...

  18. T(peak)T(end) interval in long QT syndrome

    DEFF Research Database (Denmark)

    Kanters, Jørgen Kim; Haarmark, Christian; Vedel-Larsen, Esben;

    2008-01-01

    to the occurrence of syncope. METHODS: Electrocardiograms were taken in 95 patients with LQTS drawn from the Danish long QT registry (44 patients with KvLQT1, 43 with HERG, and 8 with SCN5A mutations) and manually evaluated for the QT, QT(peak), and RR interval. RESULTS AND CONCLUSION: (1) T(p)T(e) cannot be used...

  19. Effect of residual stress on peak cap stress in arteries.

    Science.gov (United States)

    Vandiver, Rebecca

    2014-10-01

    Vulnerable plaques are a subset of atherosclerotic plaques that are prone to rupture when high stresses occur in the cap. The roles of residual stress, plaque morphology, and cap stiffness on the cap stress are not completely understood. Here, arteries are modeled within the framework of nonlinear elasticity as incompressible cylindrical structures that are residually stressed through differential growth. These structures are assumed to have a nonlinear, anisotropic, hyperelastic response to stresses in the media and adventitia layers and an isotropic response in the intima and necrotic layers. The effect of differential growth on the peak stress is explored in a simple, concentric geometry and it is shown that axial differential growth decreases the peak stress in the inner layer. Furthermore, morphological risk factors are explored. The peak stress in residually stressed cylinders is not greatly affected by changing the thickness of the intima. The thickness of the necrotic layer is shown to be the most important morphological feature that affects the peak stress in a residually stressed vessel.

  20. Correlative Peak Interval Prediction and Analysis of Chaotic Sequences

    Directory of Open Access Journals (Sweden)

    Qun Ding

    2011-07-01

    Full Text Available The paper proposes a digital circuit design for the logistic-map module used in chaotic stream ciphers, analyzes the factors that may affect the output of the sequences, and develops a calculation method for estimating the output sequential correlative peak interval. With the respective tests using different initial values, the values of parameter u and the computational precisions, extensive experiments   have   been   carried   out.   A   formula   for calculating correlative peak interval is proposed. Moreover, the relationships among precision, parameter u and correlative peak interval is provided. To ensure the security of the plaintext which is encrypted by the output sequence of the logistic-map, a proper precision could be chosen according to the formula. It provides a theoretic basis for the actual application of the chaos cryptology. The basic theory and methods have a significant implication on the statistical analysis and practical applications of the digital chaotic sequences. A diagram that presents the relationship among precision, parameter u and correlative peak interval has been generated for analysis.

  1. Assessment of a peak flow whistle in nonasthmatic children.

    Science.gov (United States)

    Terblanche, E; Fourie, P R; Wessels, J A

    1999-06-01

    We tested the agreement of peak expiratory flow (PEF) measurements between an electronic spirometer and a peak flow whistle (Whistle Watch, HarMed, Capetown, South Africa). One hundred and three healthy children between ages 6-13 years and with no previous experience in lung function tests participated in the study. Sequential PEF-readings were obtained from the spirometer and the peak flow whistle; all children had an equal number of attempts using both devices. In the case of the spirometer, the highest PEF reading of three acceptable and reproducible efforts was noted as the best PEF (PEF(SPIRO)). Whistle Watch readings were taken as the highest value when the child could activate the whistle. Despite a strong correlation (r = 0.91; R2 = 83%) between the readings of the spirometer and Whistle Watch, there was a lack of agreement between the two devices. For any individual subject, the 95% probability interval ranged between +30.4 to -47 L.min(-1); 64% of the children obtained higher PEF-values on Whistle Watch, compared to the spirometer. These findings suggest that the whistle sound of the peak flow whistle was a significant incentive, which resulted in greater maximal expiratory efforts.

  2. Focal F0 peak shape and sentence mode in Swedish

    DEFF Research Database (Denmark)

    Ambrazaitis, Gilbert; Buanzur, Tuarik C.; Niebuhr, Oliver

    2015-01-01

    Shape characteristics of rising-falling accentual F0 peaks of Stockholm Swedish Accent I words in narrow focus are studied in a corpus of 287 read sentences. The corpus includes statements and three types of polar questions. Results reveal a clear effect of sentence mode on the shape of the accen...

  3. High Peak Power Gain Switched Flared Waveguide Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Chow, W.W.; Indik, R.; Koch, S.W.; Mar, Alan, Vawter, G. Allen; Moloney, J.

    1999-08-05

    We gain-switch flared waveguide lasers to obtain 14.5 W peak powers and 0.5 nJ pulse energies with laser structures compatible with the generation of diffraction-limited beams. The results are in excellent agreement with a microscopic laser model.

  4. Mass spectral peak distortion due to Fourier transform signal processing.

    Science.gov (United States)

    Rockwood, Alan L; Erve, John C L

    2014-12-01

    Distortions of peaks can occur when one uses the standard method of signal processing of data from the Orbitrap and other FT-based methods of mass spectrometry. These distortions arise because the standard method of signal processing is not a linear process. If one adds two or more functions, such as time-dependent signals from a Fourier transform mass spectrometer and performs a linear operation on the sum, the result is the same as if the operation was performed on separate functions and the results added. If this relationship is not valid, the operation is non-linear and can produce unexpected and/or distorted results. Although the Fourier transform itself is a linear operator, the standard algorithm for processing spectra in Fourier transform-based methods include non-linear mathematical operators such that spectra processed by the standard algorithm may become distorted. The most serious consequence is that apparent abundances of the peaks in the spectrum may be incorrect. In light of these considerations, we performed theoretical modeling studies to illustrate several distortion effects that can be observed, including abundance distortions. In addition, we discuss experimental systems where these effects may manifest, including suggested systems for study that should demonstrate these peak distortions. Finally, we point to several examples in the literature where peak distortions may be rationalized by the phenomena presented here.

  5. Peak signal-to-noise ratio revisited: Is simple beautiful?

    DEFF Research Database (Denmark)

    Korhonen, Jari; You, Junyong

    2012-01-01

    Heavy criticism has been directed against using peak signal-to-noise ratio (PSNR) as a full reference quality metric for digitally processed images and video, since many studies have shown a weak correlation between subjective quality scores and the respective PSNR values. In this paper, we show...

  6. Peak broadening in paper chromatography and related techniques

    NARCIS (Netherlands)

    Ligny, C.L. de; Veen, N.G. van

    1972-01-01

    Peak dispersion (i.e. the separation efficiency) in thin-layer electrophoresis was investigated and compared for six different cellulose layers. The relative importance of longitudinal diffusion and of macroscopic inhomoeneities in the electric field and in the electroosmotic and sucking flow have

  7. Robust peak-shaving for a neighborhood with electric vehicles

    NARCIS (Netherlands)

    Gerards, Marco E.T.; Hurink, Johann L.

    2016-01-01

    Demand Side Management (DSM) is a popular approach for grid-aware peak-shaving. The most commonly used DSM methods either have no look ahead feature and risk deploying flexibility too early, or they plan ahead using predictions, which are in general not very reliable. To counter this, a DSM approach

  8. Probabilistic assignment of formulas to mass peaks in metabolomics experiments

    NARCIS (Netherlands)

    Rogers, Simon; Scheltema, Richard A.; Girolami, Mark; Breitling, Rainer

    2009-01-01

    Motivation: High-accuracy mass spectrometry is a popular technology for high-throughput measurements of cellular metabolites (metabolomics). One of the major challenges is the correct identification of the observed mass peaks, including the assignment of their empirical formula, based on the

  9. Analysis of multibeam-hydrosweep echo peaks for seabed characterisation

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, B.; Schenke, H.W.; Kodagali, V.N.; Hagen, R.

    , in general, Gaussian in nature except in the case of the Kainan Maru seamount summit (area D). The outer beams of the Enderby abyssal plain (area C) echo-peak PDF statistics reveal the highest possible large-scale feature dominance. Interestingly, Extremal...

  10. Determining cosmic microwave background structure from its peak distribution

    CERN Document Server

    Kashlinsky, A; Atrio-Barandela, F

    2001-01-01

    We present a new method for time-efficient and accurate extraction of the power spectrum from future cosmic microwave background (CMB) maps based on properties of peaks and troughs of the Gaussian CMB sky. We construct a statistic describing their angular clustering - analogously to galaxies, the 2-point angular correlation function, $\\xi_\

  11. Peak Stir Zone Temperatures during Friction Stir Processing

    Science.gov (United States)

    Swaminathan, Srinivasan; Oh-Ishi, Keiichiro; Zhilyaev, Alexander P.; Fuller, Christian B.; London, Blair; Mahoney, Murray W.; McNelley, Terry R.

    2010-03-01

    The stir zone (SZ) temperature cycle was measured during the friction stir processing (FSP) of NiAl bronze plates. The FSP was conducted using a tool design with a smooth concave shoulder and a 12.7-mm step-spiral pin. Temperature sensing was accomplished using sheathed thermocouples embedded in the tool path within the plates, while simultaneous optical pyrometry measurements of surface temperatures were also obtained. Peak SZ temperatures were 990 °C to 1015 °C (0.90 to 0.97 T Melt) and were not affected by preheating to 400 °C, although the dwell time above 900 °C was increased by the preheating. Thermocouple data suggested little variation in peak temperature across the SZ, although thermocouples initially located on the advancing sides and at the centerlines of the tool traverses were displaced to the retreating sides, precluding direct assessment of the temperature variation across the SZ. Microstructure-based estimates of local peak SZ temperatures have been made on these and on other similarly processed materials. Altogether, the peak-temperature determinations from these different measurement techniques are in close agreement.

  12. Peak HIV prevalence : a useful outcome variable for ecological studies

    NARCIS (Netherlands)

    Kenyon, Chris; Colebunders, Robert; Voeten, Helene; Lurie, Mark

    2013-01-01

    A key question for ecological studies with HIV as the outcome variable is what measure of HIV prevalence to use. In this study we compared the strengths and weaknesses of a variety of measures of HIV prevalence, focusing on peak HIV prevalence and HIV prevalence measured at the same time as the expo

  13. Characteristics of peaks of inhalation exposure to organic solvents

    NARCIS (Netherlands)

    Preller, L.; Burstyn, I.; Pater, N. de; Kromhout, H.

    2004-01-01

    Objectives: To determine which exposure metrics are sufficient to characterize 'peak' inhalation exposure to organic solvents (OS) during spraying operations. Methods: Personal exposure measurements (n = 27; duration 5-159 min) were collected during application of paints, primers, resins and glues i

  14. Identification of photoelectron energy peaks in Saturn's inner neutral torus

    Science.gov (United States)

    Schippers, P.; André, N.; Johnson, R. E.; Blanc, M.; Dandouras, I.; Coates, A. J.; Krimigis, S. M.; Young, D. T.

    2009-12-01

    We present observations from the Cassini Plasma Electron Spectrometer (CAPS/ELS) of characteristic peaks in the electron energy spectrum that are identified in the innermost regions of the Saturnian magnetosphere during low-latitude orbits of the Cassini spacecraft around Saturn. We show how a narrow electron energy peak at about 20 eV and a possible peak at about 42 eV can be extracted from the background in CAPS observations after the contamination from high-energy particles has been removed from the measurements. We estimate the density of the newly discovered electron population to be a small fraction (10%) of the electron density measured in the CAPS/ELS energy range, and a much smaller fraction (about 1%) of the total electron density measured by Radio and Plasma Wave Science since our measurements are affected by spacecraft negative potential. We suggest that this population corresponds to photoelectrons generated by the solar EUV photoionization of the extended cloud of neutral gas observed in these regions. We use pitch angle information to assess the near-equatorial source of these photoelectrons and a simple model of chemistry in order to further support our interpretation. Therefore, photoionization seems to be an additional process for plasma production in the innermost Saturnian magnetosphere. Finally, we mention that the comparison of the modeled and the observed photoelectron peak energies could be used to estimate the spacecraft potential in this region which is measured independently by the Langmuir Probe.

  15. Probabilistic assignment of formulas to mass peaks in metabolomics experiments

    NARCIS (Netherlands)

    Rogers, Simon; Scheltema, Richard A.; Girolami, Mark; Breitling, Rainer

    2009-01-01

    Motivation: High-accuracy mass spectrometry is a popular technology for high-throughput measurements of cellular metabolites (metabolomics). One of the major challenges is the correct identification of the observed mass peaks, including the assignment of their empirical formula, based on the measure

  16. Robust peak-shaving for a neighborhood with electric vehicles

    NARCIS (Netherlands)

    Gerards, Marco Egbertus Theodorus; Hurink, Johann L.

    2016-01-01

    Demand Side Management (DSM) is a popular approach for grid-aware peak-shaving. The most commonly used DSM methods either have no look ahead feature and risk deploying flexibility too early, or they plan ahead using predictions, which are in general not very reliable. To counter this, a DSM approach

  17. Peak Reduction and Clipping Mitigation by Compressive Sensing

    CERN Document Server

    Al-Safadi, Ebrahim B

    2011-01-01

    This work establishes the design, analysis, and fine-tuning of a Peak-to-Average-Power-Ratio (PAPR) reducing system, based on compressed sensing at the receiver of a peak-reducing sparse clipper applied to an OFDM signal at the transmitter. By exploiting the sparsity of the OFDM signal in the time domain relative to a pre-defined clipping threshold, the method depends on partially observing the frequency content of extremely simple sparse clippers to recover the locations, magnitudes, and phases of the clipped coefficients of the peak-reduced signal. We claim that in the absence of optimization algorithms at the transmitter that confine the frequency support of clippers to a predefined set of reserved-tones, no other tone-reservation method can reliably recover the original OFDM signal with such low complexity. Afterwards we focus on designing different clipping signals that can embed a priori information regarding the support and phase of the peak-reducing signal to the receiver, followed by modified compres...

  18. Peak Dose Assessment for Proposed DOE-PPPO Authorized Limits

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado, Delis [Oak Ridge Institute for Science and Education, Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program

    2012-06-01

    The Oak Ridge Institute for Science and Education (ORISE), a U.S. Department of Energy (DOE) prime contractor, was contracted by the DOE Portsmouth/Paducah Project Office (DOE-PPPO) to conduct a peak dose assessment in support of the Authorized Limits Request for Solid Waste Disposal at Landfill C-746-U at the Paducah Gaseous Diffusion Plant (DOE-PPPO 2011a). The peak doses were calculated based on the DOE-PPPO Proposed Single Radionuclides Soil Guidelines and the DOE-PPPO Proposed Authorized Limits (AL) Volumetric Concentrations available in DOE-PPPO 2011a. This work is provided as an appendix to the Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky (ORISE 2012). The receptors evaluated in ORISE 2012 were selected by the DOE-PPPO for the additional peak dose evaluations. These receptors included a Landfill Worker, Trespasser, Resident Farmer (onsite), Resident Gardener, Recreational User, Outdoor Worker and an Offsite Resident Farmer. The RESRAD (Version 6.5) and RESRAD-OFFSITE (Version 2.5) computer codes were used for the peak dose assessments. Deterministic peak dose assessments were performed for all the receptors and a probabilistic dose assessment was performed only for the Offsite Resident Farmer at the request of the DOE-PPPO. In a deterministic analysis, a single input value results in a single output value. In other words, a deterministic analysis uses single parameter values for every variable in the code. By contrast, a probabilistic approach assigns parameter ranges to certain variables, and the code randomly selects the values for each variable from the parameter range each time it calculates the dose (NRC 2006). The receptor scenarios, computer codes and parameter input files were previously used in ORISE 2012. A few modifications were made to the parameter input files as appropriate for this effort. Some of these changes

  19. Superoxide dismutase levels and peak expiratory flow in asthmatic children

    Directory of Open Access Journals (Sweden)

    Arie Kurniasih

    2016-11-01

    Full Text Available involvevariety of cells such as inflammatory mediators, reactive oxygenspecies (ROS, and cytokines. The inflammatory process would beexacerbated in the presence of oxidative stress. Superoxide dismutase(SOD is the first important enzyme to protect the respiratory tractagainst oxidative stress. The decreased of SOD has a correlation withincreased of airway obstruction and bronchospasm.Objective To assess for a correlation between superoxide dismutase(SOD levels and peak expiratory flow, as well as to determinethe impact of SOD levels for predicting asthma attacks.Methods We conducted a prospective cohort study at Dr. SardjitoHospital, Yogyakarta, between February and April 2011 involvingasthmatic children aged 5-18 years. Subjects’ serum SOD levelsand peak expiratory flow were measured at the same time point.We then performed a prospective study following up on the samesubjects to find out if they had a recurrent asthma attack withinone month of the tests. We also reassessed their peak expiratoryflow one month after blood specimens were obtained.Results Thirty-nine patients were enrolled in this study. Therewas no significant correlation between SOD level and peakexpiratory flow [r=0.289; 95%CI -0.025 to 0.47; P=0.074].However, older age was significantly associated with higher peakexpiratory flow (=0.5; 95%CI 3.10 to 11.57; P=0.01. Lowerlevels of SOD increased the risk of asthma attacks in a monthfollowing the initial measurements (RR=5.5; 95%CI 1.6 to 18.9;P=0.009.Conclusion Superoxide dismutase (SOD level is not significantlyassociated with peak expiratory flow. However, we find arelationship between older age and higher peak expiratory flowand a relationship between lower SOD levels and risk of asthmaattacks within one month following the tests. [

  20. Aerobic power and peak power of elite America's Cup sailors.

    Science.gov (United States)

    Neville, Vernon; Pain, Matthew T G; Folland, Jonathan P

    2009-05-01

    Big-boat yacht racing is one of the only able bodied sporting activities where standing arm-cranking ('grinding') is the primary physical activity. However, the physiological capabilities of elite sailors for standing arm-cranking have been largely unreported. The purpose of the study was to assess aerobic parameters, VO(2peak) and onset of blood lactate (OBLA), and anaerobic performance, torque-crank velocity and power-crank velocity relationships and therefore peak power (P (max)) and optimum crank-velocity (omega(opt)), of America's Cup sailors during standing arm-cranking. Thirty-three elite professional sailors performed a step test to exhaustion, and a subset of ten grinders performed maximal 7 s isokinetic sprints at different crank velocities, using a standing arm-crank ergometer. VO(2peak) was 4.7 +/- 0.5 L/min (range 3.6-5.5 L/min) at a power output of 332 +/- 44 W (range 235-425 W). OBLA occurred at a power output of 202 +/- 31 W (61% of W(max)) and VO(2) of 3.3 +/- 0.4 L/min (71% of VO(2peak)). The torque-crank velocity relationship was linear for all participants (r = 0.9 +/- 0.1). P (max) was 1,420 +/- 37 W (range 1,192-1,617 W), and omega(opt) was 125 +/- 6 rpm. These data are among the highest upper-body anaerobic and aerobic power values reported. The unique nature of these athletes, with their high fat-free mass and specific selection and training for standing arm cranking, likely accounts for the high values. The influence of crank velocity on peak power implies that power production during on-board 'grinding' may be optimised through the use of appropriate gear-ratios and the development of efficient gear change mechanisms.

  1. Peak-locking reduction for particle image velocimetry

    Science.gov (United States)

    Michaelis, Dirk; Neal, Douglas R.; Wieneke, Bernhard

    2016-10-01

    A parametric study of the factors contributing to peak-locking, a known bias error source in particle image velocimetry (PIV), is conducted using synthetic data that are processed with a state-of-the-art PIV algorithm. The investigated parameters include: particle image diameter, image interpolation techniques, the effect of asymmetric versus symmetric window deformation, number of passes and the interrogation window size. Some of these parameters are found to have a profound effect on the magnitude of the peak-locking error. The effects for specific PIV cameras are also studied experimentally using a precision turntable to generate a known rotating velocity field. Image time series recorded using this experiment show a linear range of pixel and sub-pixel shifts ranging from 0 to  ±4 pixels. Deviations in the constant vorticity field (ω z ) reveal how peak-locking can be affected systematically both by varying parameters of the detection system such as the focal distance and f-number, and also by varying the settings of the PIV analysis. A new a priori technique for reducing the bias errors associated with peak-locking in PIV is introduced using an optical diffuser to avoid undersampled particle images during the recording of the raw images. This technique is evaluated against other a priori approaches using experimental data and is shown to perform favorably. Finally, a new a posteriori anti peak-locking filter (APLF) is developed and investigated, which shows promising results for both synthetic data and real measurements for very small particle image sizes.

  2. Revisiting the Correlations of Peak Luminosity with Spectral Lag and Peak Energy of the Observed Gamma-ray Bursts

    Science.gov (United States)

    Jo, Yun-A.; Chang, Heon-Young

    2016-12-01

    An analysis of light curves and spectra of observed gamma-ray bursts in gamma-ray ranges is frequently demanded because the prompt emission contains immediate details regarding the central engine of gamma-ray bursts (GRBs). We have revisited the relationship between the collimation-corrected peak luminosity and the spectral lag, investigating the lag-luminosity relationships in great detail by focusing on spectral lags resulting from all possible combinations of channels. Firstly, we compiled the opening angle data and demonstrated that the distribution of opening angles of 205 long GRBs is represented by a double Gaussian function having maxima at 0.1 and 0.3 radians. We confirmed that the peak luminosity and the spectral lag are anti-correlated, both in the observer frame and in the source frame. We found that, in agreement with our previous conclusion, the correlation coefficient improves significantly in the source frame. It should be noted that spectral lags involving channel 2 (25-50 keV) yield high correlation coefficients, where Swift/Burst Alert Telescope (BAT) has four energy channels (channel 1: 15-25 keV, channel 2: 25-50 keV, channel 3: 50-100 keV, channel 4: 100-200 keV). We also found that peak luminosity is positively correlated with peak energy.

  3. Ionoacoustic characterization of the proton Bragg peak with submillimeter accuracy

    Energy Technology Data Exchange (ETDEWEB)

    Assmann, W., E-mail: walter.assmann@lmu.de; Reinhardt, S.; Lehrack, S.; Edlich, A.; Thirolf, P. G.; Parodi, K. [Department for Medical Physics, Ludwig-Maximilians-Universität München, Am Coulombwall 1, Garching 85748 (Germany); Kellnberger, S.; Omar, M.; Ntziachristos, V. [Institute for Biological and Medical Imaging, Technische Universität München and Helmholtz Zentrum München, Ingolstädter Landstrasse 1, Neuherberg 85764 (Germany); Moser, M.; Dollinger, G. [Institute for Applied Physics and Measurement Technology, Universität der Bundeswehr, Werner-Heisenberg-Weg 39, Neubiberg 85577 (Germany)

    2015-02-15

    Purpose: Range verification in ion beam therapy relies to date on nuclear imaging techniques which require complex and costly detector systems. A different approach is the detection of thermoacoustic signals that are generated due to localized energy loss of ion beams in tissue (ionoacoustics). Aim of this work was to study experimentally the achievable position resolution of ionoacoustics under idealized conditions using high frequency ultrasonic transducers and a specifically selected probing beam. Methods: A water phantom was irradiated by a pulsed 20 MeV proton beam with varying pulse intensity and length. The acoustic signal of single proton pulses was measured by different PZT-based ultrasound detectors (3.5 and 10 MHz central frequencies). The proton dose distribution in water was calculated by Geant4 and used as input for simulation of the generated acoustic wave by the matlab toolbox k-WAVE. Results: In measurements from this study, a clear signal of the Bragg peak was observed for an energy deposition as low as 10{sup 12} eV. The signal amplitude showed a linear increase with particle number per pulse and thus, dose. Bragg peak position measurements were reproducible within ±30 μm and agreed with Geant4 simulations to better than 100 μm. The ionoacoustic signal pattern allowed for a detailed analysis of the Bragg peak and could be well reproduced by k-WAVE simulations. Conclusions: The authors have studied the ionoacoustic signal of the Bragg peak in experiments using a 20 MeV proton beam with its correspondingly localized energy deposition, demonstrating submillimeter position resolution and providing a deep insight in the correlation between the acoustic signal and Bragg peak shape. These results, together with earlier experiments and new simulations (including the results in this study) at higher energies, suggest ionoacoustics as a technique for range verification in particle therapy at locations, where the tumor can be localized by ultrasound

  4. Evaluation of peaking factors uncertainty for CASMO-3

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kang Suk; Song, Jae Seung; Kim, Yong Rae; Ji, Seong Kyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-02-01

    This document evaluates the pin-to-box factor uncertainty based on using the CASMO-3 with 40-group J-library. Five CE criticals performed by Westinghouse, two by B and W and four RPI criticals were analyzed, using cross sections by CASMO-3. DOT was used for the core calculation. THis is one hof series of efforts to verify ADONIS procedure which is a new core design package under development by KAERI. The expected outcome of this analysis is CASMO-3 pin peak uncertainty applicable to CE type fuel assembly design. The evaluated uncertainty of peaking factors for CASMO-3 was 1.863%. 21 tabs., 23 figs., 12 refs. (Author) .new.

  5. Households’ hourly electricity consumption and peak demand in Denmark

    DEFF Research Database (Denmark)

    Møller Andersen, Frits; Baldini, Mattia; Hansen, Lars Gårn

    2017-01-01

    to a considerable introduction of electric vehicles and individual heat pumps, household consumption is expected to increase considerably, especially peak hour consumption is expected to increase. Next the paper presents results from a new experiment where household customers are given economic and/or environmental......The electrification of residential energy demand for heating and transportation is expected to increase peak load and require additional generation and transmission capacities. Electrification also provides an opportunity to increase demand response. With a focus on household electricity...... incentives to shift consumption to or away from specified hours. The experiment focuses on the present classic consumption and shows that household customers do react to incentives, but today the flexibility of the classic consumption is limited. Considering electric vehicles and individual heat pumps...

  6. Peak Clipping in Power Lines using Distributed Generation

    Directory of Open Access Journals (Sweden)

    S. Sambath

    2015-05-01

    Full Text Available This real time study is intent to analyze the impact and role of Distributed Generation (DG in Tamil Nadu, India to examine what the benefits of decentralized generation would be for peak clipping. Using load flow analysis to simulation over a quantify the loss reduction and system improvement by having decentralized generation available line conditions for actual rural feeders in Tamil Nadu, India. In order to realize the energy efficiency potential and upscale the implementation of DSM program by utility, load research should be the starting point. One of the key objectives of load research is to understand and analyze the utility’s system load profile and Peak clipping. This helps utilities to better plan their system in Demand side Management.

  7. Systems and Methods for Peak-Seeking Control

    Science.gov (United States)

    Ryan, John J (Inventor); Speyer, Jason L (Inventor)

    2013-01-01

    A computerized system and method for peak-seeking-control that uses a unique Kalman filter design to optimize a control loop, in real time, to either maximize or minimize a performance function of a physical object ("plant"). The system and method achieves more accurate and efficient peak-seeking-control by using a time-varying Kalman filter to estimate both the performance function gradient (slope) and Hessian (curvature) based on direct position measurements of the plant, and does not rely upon modeling the plant response to persistent excitation. The system and method can be naturally applied in various applications in which plant performance functions have multiple independent parameters, and it does not depend upon frequency separation to distinguish between system dimensions.

  8. Peak athletic performance and ageing: evidence from baseball.

    Science.gov (United States)

    Bradbury, John Charles

    2009-04-01

    Baseball players exhibit a pattern of improvement and decline in performance; however, differing lengths of careers and changes in rules and characteristics of the game complicate assessments of age-related effects on performance. This study attempts to isolate the impact of age on several player skills while controlling for relevant outside factors using longitudinal data from 86 seasons of Major League Baseball. The results indicate that players age in different skills in accord with studies of ageing in other athletic contests. For overall performance, multiple-regression estimates indicate that hitters and pitchers peak around the age of 29 - later than previous estimates. Athletic skills such as hitting and running peak earlier than skills that rely heavily on experience and knowledge, such as issuing and drawing walks.

  9. The SECIS instrument on the Lomnicky Peak Observatory

    CERN Document Server

    Ambroz, J; Rudawy, P; Rybak, J; Phillips, K J H

    2010-01-01

    Heating mechanisms of the solar corona will be investigated at the high-altitude solar observatory Lomnicky Peak of the Astronomical Institute of SAS (Slovakia) using its mid-size Lyot coronagraph and post-focal instrument SECIS provided by Astronomical Institute of the University of Wroclaw (Poland). The data will be studied with respect to the energy transport and release responsible for heating the solar corona to temperatures of mega-Kelvins. In particular investigations will be focused on detection of possible high-frequency MHD waves in the solar corona. The scientific background of the project, technical details of the SECIS system modified specially for the Lomnicky Peak coronagraph, and inspection of the test data are described in the paper.

  10. The baryon acoustic oscillation peak: a flexible standard ruler

    CERN Document Server

    Roukema, Boudewijn F

    2016-01-01

    For about a decade, the baryon acoustic oscillation (BAO) peak at about 105 Mpc/h has provided a standard ruler test of the LCDM cosmological model, a member of the Friedmann--Lemaitre--Robertson--Walker (FLRW) family of cosmological models---according to which comoving space is rigid. However, general relativity does not require comoving space to be rigid. During the virialisation epoch, when the most massive structures form by gravitational collapse, it should be expected that comoving space evolves inhomogeneous curvature as structure grows. The BAO peak standard ruler should also follow this inhomogeneous evolution if the comoving rigidity assumption is false. This "standard" ruler has now been detected to be flexible, as expected under general relativity.

  11. Frequency interpretation of tidal peak in intracranial pressure wave.

    Science.gov (United States)

    Shahsavari, Sima; McKelvey, Tomas

    2008-01-01

    A new approach to locate different components of ICP signal for each cardiac induced ICP beat is presented. In this method an initial timing map is used to define the appropriate part of the ICP wave which should be searched for the specific component. In parallel a recently proposed method was used to decompose the ICP wave to its different frequency harmonics. This algorithm, which is based on tracking the amplitude of the harmonic components using Kalman filtering, brings both heart rate variability and cardiorespiratory interaction into account and provides good time and frequency resolution. Comparing the results of two methods for seventeen ICP records, each one hour long, it has been observed that the fundamental cardiac component has the most significant contribution in the construction of the tidal peak in ICP and therefore tracking of this harmonic could be informative of the tidal peak evolution over the time.

  12. Simulation of Peak Flows Using Remote Sensing Systems

    Science.gov (United States)

    Magaña Hernández, F.; Ba, K. M.; Guerra-Cobián, V.

    2013-05-01

    In this study we utilized remotely sensed data (radar and satellite precipitation products) to simulate the peak discharges of some storm events of the Escondido River. This is a poorly gauged watershed located in Northern Mexico, in the State of Coahuila and is a sub-basin of Rio Bravo, known also as Río Grande. The radar data are from NOAA (Radar KDFX located in Laughlin Air Force Base, Texas). We used two satellite product estimates PERSIANN and CMORPH. These three estimated precipitation products have been compared using the hydrologic model HEC-HMS to simulate the peak discharge. The results of the simulations show the importance of the use of this type of data in hydrologic modeling.

  13. Evaluations of pleasurable experiences: the peak-end rule.

    Science.gov (United States)

    Do, Amy M; Rupert, Alexander V; Wolford, George

    2008-02-01

    Prior research suggests that the addition of mild pain to an aversive event may lead people to prefer and directly choose more pain over less pain (Kahneman, Fredrickson, Schreiber, & Redelmeier, 1993). Kahneman et al. suggest that pain ratings are based on a combination of peak pain and final pain. Similarly, people rate a happy life that ends suddenly as being better than one with additional years of mild happiness (Diener, Wirtz, & Oishi, 2001), even though the former objectively consists of less pleasure than the latter. Applying these concepts to material goods, we investigated the impact of positivity and timing on the retrospective evaluations of material goods. We found strong evidence that the peak-end rule applies to both material goods and pain.

  14. Identification and separation of DNA mixtures using peak area information

    DEFF Research Database (Denmark)

    Cowell, R.G.; Lauritzen, Steffen Lilholt; Mortera, J.

    , whose profiles have been measured, have contributed to the mixture, but also to predict DNA profiles of unknown contributors by separating the mixture into its individual components. The potential of our methodology is illustrated on case data examples and compared with alternative approaces......We show how probabilistic expert systems can be used to analyse forensic identification problems involving DNA mixture traces using quantitative peak area information. Peak area is modelled with conditional Gaussian distributions. The expert system can be used for scertaining whether individuals....... The advantages are that identification and separation issues can be handled in a unified way within a single network model and the uncertainty associated with the analysis is quantified....

  15. Multiple peaks of species abundance distributions induced by sparse interactions

    CERN Document Server

    Obuchi, Tomoyuki; Tokita, Kei

    2016-01-01

    We investigate the replicator dynamics with "sparse" symmetric interactions which represent specialist-specialist interactions in ecological communities. By considering a large self interaction $u$, we conduct a perturbative expansion which manifests that the nature of the interactions has a direct impact on the species abundance distribution. The central results are all species coexistence in a realistic range of the model parameters and that a certain discrete nature of the interactions induces multiple peaks in the species abundance distribution, providing the possibility of theoretically explaining multiple peaks observed in various field studies. To get more quantitative information, we also construct a non-perturbative theory which becomes exact on tree-like networks if all the species coexist, providing exact critical values of $u$ below which extinct species emerge. Numerical simulations in various different situations are conducted and they clarify the robustness of the presented mechanism of all spe...

  16. Adjustment of Peak Streamflows of a Tropical River for Urbanization

    OpenAIRE

    Ata Amini; Thamer M. Ali; Abdul H.B. Ghazali; Bujang K. Huat

    2009-01-01

    Peak runoff from a catchment is influenced by many factors such as intensity and duration of rainfall, catchment topography, catchment shape, land use and other variables. For a particular catchment, landuse change and other human activities will alter the characteristic of catchment hydrograph. Problem statement: As a result of urbanization, the magnitude of floods occurring in a catchment increased. It was found that the land use change in the Langat River catchment has clear impact on annu...

  17. Sustained fixation induced changes in phoria and convergence peak velocity.

    Directory of Open Access Journals (Sweden)

    Eun H Kim

    Full Text Available PURPOSE: This study sought to investigate the influence of phoria adaptation on convergence peak velocity from responses located at different initial vergence positions. METHODS: Symmetrical 4° convergence step responses and near dissociated phoria (measured at 40 cm from the subject's midline were recorded from six subjects with normal binocular vision using an infrared limbus tracking system with a haploscope. Two different sustained fixations (1° and 16° convergent rotation along the subject's midline were used to study whether phoria had an influence on the peak velocity of convergence responses located at two initial vergence positions (1° or 'far' steps and 12° or 'near' steps. RESULTS: Phoria was significantly adapted after a sustained fixation task at near (16° and far (1° (p<0.002. A repeated measures ANOVA showed that convergence far steps were significantly faster than the near steps (p<0.03. When comparing convergence steps with the same initial vergence position, steps measured after near phoria adaptation were faster than responses after far adaptation (p<0.02. A regression analysis demonstrated that the change in phoria and the change in convergence peak velocity were significantly correlated for the far convergence steps (r = 0.97, p = 0.001. A weaker correlation was observed for the near convergence steps (r = 0.59, p = 0.20. CONCLUSION: As a result of sustained fixation, phoria was adapted and the peak velocity of the near and far convergence steps was modified. This study has clinical considerations since prisms, which evoke phoria adaptation, can be prescribed to help alleviate visual discomfort. Future investigations should include a systematic study of how prisms may influence convergence and divergence eye movements for those prescribed with prisms within their spectacles.

  18. Peak earthquake response of structures under multi-component excitations

    Institute of Scientific and Technical Information of China (English)

    Jianwei Song; Zach Liang; Yi-Lun Chu; George C.Lee

    2007-01-01

    Accurate estimation of the peak seismic responses of structures is important in earthquake resistant design.The internal force distributions and the seismic responses of structures are quite complex,since ground motions are multidirectional.One key issue is the uncertainty of the incident angle between the directions of ground motion and the reference axes of the structure.Different assumed seismic incidences can result in difierent peak values within the scope of design spectrum analysis for a given structure and earthquake ground motion record combination.Using time history analysis to determine the maximum structural responses excited by a given earthquake record requires repetitive calculations to determine the critical incident angle.This paper presents a transformation approach for relatively accurate and rapid determination of the maximum peak responses of a linear structure subjected to three-dimensional excitations within all possible seismic incident angles.The responses can be deformations,internal forces,strains and so on.An irregular building structure model is established using SAP2000 program.Several typical earthquake records and an artificial white noise are applied to the structure model to illustrate the variation of the maximum structural responses for different incident angles.Numerical results show that for many structural parameters,the variation can be greater than 100%.This method can be directly applied to time history analysis of structures using existing computer software to determine the peak responses without carrying out the analyses for all possible incident angles.It can also be used to verify and/or modify aseismic designs by using response spectrum analysis.

  19. Connection between ozone concentration and atmosphere circulation at peak Moussala

    Science.gov (United States)

    Nojarov, Peter; Ivanov, Peter; Kalapov, Ivo; Penev, Ilia; Drenska, Mirolujba

    2009-09-01

    Connection between ozone concentration and atmosphere circulation is investigated based on measurements at BEO station, peak Moussala (2,925 m a.s.l.), for the period 09 August 2006 to 29 January 2008. Ozone concentration data are collected with UV-analyzer “Environnement O3 42” and meteo data with weather station “Vaisala”. There are measurements of 7Be. Data from NOAA HYSPLIT model for particle trajectories are also used. Eight wind directions and three ranges of wind velocities are employed in the analysis. A comparison of ozone concentrations in upward and downward air transport according to HYSPLIT model is made. The number of cases with ozone concentration above 63 ppb has been counted. Mann-Whitney nonparametric test is employed as a basic statistical method. Correlation between atmosphere pressure and tropospheric ozone content is made. The same is done for 7Be and ozone. The main conclusion is that there is not any local or regional pollution effect detectable at peak Moussala, but most of the ozone measured is due to emissions of hydrocarbons and NO x over a larger region. There could be some regional sources of ozone building substances in southwest direction from peak Moussala. Air transported from the north quarter has higher ozone concentrations compared to the south quarter. In vertical direction, upward transport of air masses shows higher values of ozone concentration. Higher wind velocity is associated with low ozone concentrations at peak Moussala. The annual course of ozone concentration has summer maximum and winter minimum. There is right connection between air pressure and ozone concentration. The same is valid for the correlation between 7Be and ozone. Diurnal ozone course shows daytime maximum in winter and nighttime maximum in summer.

  20. Degradation of the Bragg peak due to inhomogeneities.

    Science.gov (United States)

    Urie, M; Goitein, M; Holley, W R; Chen, G T

    1986-01-01

    The rapid fall-off of dose at the end of range of heavy charged particle beams has the potential in therapeutic applications of sparing critical structures just distal to the target volume. Here we explored the effects of highly inhomogeneous regions on this desirable depth-dose characteristic. The proton depth-dose distribution behind a lucite-air interface parallel to the beam was bimodal, indicating the presence of two groups of protons with different residual ranges, creating a step-like depth-dose distribution at the end of range. The residual ranges became more spread out as the interface was angled at 3 degrees, and still more at 6 degrees, to the direction of the beam. A second experiment showed little significant effect on the distal depth-dose of protons having passed through a mosaic of teflon and lucite. Anatomic studies demonstrated significant effects of complex fine inhomogeneities on the end of range characteristics. Monoenergetic protons passing through the petrous ridges and mastoid air cells in the base of skull showed a dramatic degradation of the distal Bragg peak. In beams with spread out Bragg peaks passing through regions of the base of skull, the distal fall-off from 90 to 20% dose was increased from its nominal 6 to well over 32 mm. Heavy ions showed a corresponding degradation in their ends of range. In the worst case in the base of skull region, a monoenergetic neon beam showed a broadening of the full width at half maximum of the Bragg peak to over 15 mm (compared with 4 mm in a homogeneous unit density medium). A similar effect was found with carbon ions in the abdomen, where the full width at half maximum of the Bragg peak (nominally 5.5 mm) was found to be greater than 25 mm behind gas-soft-tissue interfaces. We address the implications of these data for dose computation with heavy charged particles.

  1. General Merrill A. McPeak Leadership and Organizational Change

    Science.gov (United States)

    2001-06-01

    GENERAL MERRILL A. MCPEAK LEADERSHIP AND ORGANIZATIONAL CHANGE BY MAJOR THOMAS A. BUSSIERE A THESIS PRESENTED TO THE...Covered (from... to) - Title and Subtitle General Merrill A. McPeak Leadership and Organizational Change Contract Number Grant Number Program Element...General McPeak�s leadership. The sections of each case focus on the particular issues associated with organizational change and leadership. The

  2. Martial arts striking hand peak acceleration, accuracy and consistency.

    Science.gov (United States)

    Neto, Osmar Pinto; Marzullo, Ana Carolina De Miranda; Bolander, Richard P; Bir, Cynthia A

    2013-01-01

    The goal of this paper was to investigate the possible trade-off between peak hand acceleration and accuracy and consistency of hand strikes performed by martial artists of different training experiences. Ten male martial artists with training experience ranging from one to nine years volunteered to participate in the experiment. Each participant performed 12 maximum effort goal-directed strikes. Hand acceleration during the strikes was obtained using a tri-axial accelerometer block. A pressure sensor matrix was used to determine the accuracy and consistency of the strikes. Accuracy was estimated by the radial distance between the centroid of each subject's 12 strikes and the target, whereas consistency was estimated by the square root of the 12 strikes mean squared distance from their centroid. We found that training experience was significantly correlated to hand peak acceleration prior to impact (r(2)=0.456, p =0.032) and accuracy (r(2)=0. 621, p=0.012). These correlations suggest that more experienced participants exhibited higher hand peak accelerations and at the same time were more accurate. Training experience, however, was not correlated to consistency (r(2)=0.085, p=0.413). Overall, our results suggest that martial arts training may lead practitioners to achieve higher striking hand accelerations with better accuracy and no change in striking consistency.

  3. 36Cl bomb peak: comparison of modeled and measured data

    Directory of Open Access Journals (Sweden)

    A. Eichler

    2009-06-01

    Full Text Available The extensive nuclear bomb testing of the fifties and sixties and the final tests in the seventies caused a strong 36Cl peak that has been observed in ice cores world-wide. The measured 36Cl deposition fluxes in eight ice cores (Dye3, Fiescherhorn, Grenzgletscher, Guliya, Huascarán, North GRIP, Inylchek (Tien Shan and Berkner Island were compared with an ECHAM5-HAM general circulation model simulation (1952–1972. We find a good agreement between the measured and the modeled 36Cl fluxes assuming that the bomb test produced global 36Cl input was ~80 kg. The model simulation indicates that the fallout of the bomb test produced 36Cl is largest in the subtropics and mid-latitudes due to the strong stratosphere-troposphere exchange. In Greenland the 36Cl bomb signal is quite large due to the relatively high precipitation rate. In Antarctica the 36Cl bomb peak is small but is visible even in the driest areas. The model suggests that the large bomb tests in the Northern Hemisphere are visible around the globe but the later (end of sixties and early seventies smaller tests in the Southern Hemisphere are much less visible in the Northern Hemisphere. The question of how rapidly and to what extent the bomb produced 36Cl is mixed between the hemispheres depends on the season of the bomb test. The model results give an estimate of the amplitude of the bomb peak around the globe.

  4. 36Cl bomb peak: comparison of modeled and measured data

    Directory of Open Access Journals (Sweden)

    A. Eichler

    2009-01-01

    Full Text Available The extensive nuclear bomb testing of the fifties and sixties and the final tests in the seventies caused a strong 36Cl peak that has been observed in ice cores world-wide. The measured 36Cl deposition fluxes in eight ice cores (Dye3, Fiescherhorn, Grenzgletscher, Guliya, Huascarán, North GRIP, Inylchek (Tien Shan and Berkner Island were compared with an ECHAM5-HAM general circulation model simulation (1952–1972. We find a good agreement between the measured and the modeled 36Cl fluxes assuming that the bomb test produced global 36Cl input was ~80 kg. The model simulation indicates that the fallout of the bomb test produced 36Cl is largest in the subtropics and mid-latitudes due to the strong stratosphere-troposphere exchange. In Greenland the 36Cl bomb signal is quite large due to the relatively high precipitation rate. In Antarctica the 36Cl bomb peak is small but is visible even in the driest areas. The model suggests that the large bomb tests in the Northern Hemisphere are visible around the globe but the later (end of sixties and early seventies smaller tests in the Southern Hemisphere are much less visible in the Northern Hemisphere. The question of how rapidly and to what extent the bomb produced 36Cl is mixed between the hemispheres depends on the season of the bomb test. The model results give an estimate of the amplitude of the bomb peak around the globe.

  5. Mineral Resources: Reserves, Peak Production and the Future

    Directory of Open Access Journals (Sweden)

    Lawrence D. Meinert

    2016-02-01

    Full Text Available The adequacy of mineral resources in light of population growth and rising standards of living has been a concern since the time of Malthus (1798, but many studies erroneously forecast impending peak production or exhaustion because they confuse reserves with “all there is”. Reserves are formally defined as a subset of resources, and even current and potential resources are only a small subset of “all there is”. Peak production or exhaustion cannot be modeled accurately from reserves. Using copper as an example, identified resources are twice as large as the amount projected to be needed through 2050. Estimates of yet-to-be discovered copper resources are up to 40-times more than currently-identified resources, amounts that could last for many centuries. Thus, forecasts of imminent peak production due to resource exhaustion in the next 20–30 years are not valid. Short-term supply problems may arise, however, and supply-chain disruptions are possible at any time due to natural disasters (earthquakes, tsunamis, hurricanes or political complications. Needed to resolve these problems are education and exploration technology development, access to prospective terrain, better recycling and better accounting of externalities associated with production (pollution, loss of ecosystem services and water and energy use.

  6. Calibration of {sup 133}Ba by Sum-Peak Method

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.L. da; Delgado, J.U.; Poledna, R.; Trindade, O.L.; Veras, E.V. de; Santos, A.; Rangel, J., E-mail: ronaldo@ird.gov.br, E-mail: delgado@ird.gov.br, E-mail: poledna@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Almeida, M.C.M, E-mail: marcandida@yahoo.com.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    A calibration laboratory should have several methods of measurement in order to ensure robustness on the values applied. The National Laboratory for Metrology of Ionizing Radiation, (LNMRI IRD), provides gamma sources of radionuclide in various geometries and standardized in activity with reduced uncertainties. Some absolute and relative methods of calibrations could be used routinely. Relative methods require standards to determine the activity of sample to be calibrated, while the absolute methods do not need, simply make the counting and the calculation of the activity is obtained directly. The great advantage of calibrations of radionuclides by absolute method is the accuracy and low uncertainties. {sup 133}Ba is a radionuclide enough used in research laboratories and calibration of detectors for environmental analysis and, according to the scheme, it decays 100% by electron capture and emits about 14 energy gamma and X-ray lines, forming several coincidences. However, the classical methods of absolute measurement, as coincidence 4 πβ-γ have difficulty to calibrate {sup 133}Ba due to its complex decay scheme. The sum-peak method, developed by Brickman, could allow this calibration. It is used for radionuclide calibration that emits at least two photons in coincidence. Therefore, it was developed a methodology that combines gamma spectrometry technique with sum-peak method to standardize {sup 133}Ba samples. Activity results obtained proved compatible, with uncertainties of less than 1%, and, when compared with other methods of calibration, sum-peak demonstrated the feasibility of this methodology, particularly, for simplicity and effectiveness. (author)

  7. R-peaks detection based on stationary wavelet transform.

    Science.gov (United States)

    Merah, M; Abdelmalik, T A; Larbi, B H

    2015-10-01

    Automatic detection of the QRS complexes/R-peaks in an electrocardiogram (ECG) signal is the most important step preceding any kind of ECG processing and analysis. The performance of these systems heavily relies on the accuracy of the QRS detector. The objective of present work is to drive a new robust method based on stationary wavelet transform (SWT) for R-peaks detection. The decimation of the coefficients at each level of the transformation algorithm is omitted, more samples in the coefficient sequences are available and hence a better outlier detection can be performed. Using the information of local maxima, minima and zero crossings of the fourth SWT coefficient detail, the proposed algorithm identifies the significant points for detection and delineation of the QRS complexes, as well as detection and identification of the QRS individual waves peaks of the pre-processed ECG signal. Various experimental results show that the proposed algorithm exhibits reliable QRS detection as well as accurate ECG delineation, achieving excellent performance on different databases, on the MIT-BIH database (Se=99.84%, P=99.88%), on the QT Database (Se=99.94%, P=99.89%) and on MIT-BIH Noise Stress Test Database, (Se=95.30%, P=93.98%). Reliability and accuracy are close to the highest among the ones obtained in other studies. Experiments results being satisfactory, the SWT may represent a novel QRS detection tool, for a robust ECG signal analysis.

  8. Predictors of the peak width for networks with exponential links

    Science.gov (United States)

    Troutman, B.M.; Karlinger, M.R.

    1989-01-01

    We investigate optimal predictors of the peak (S) and distance to peak (T) of the width function of drainage networks under the assumption that the networks are topologically random with independent and exponentially distributed link lengths. Analytical results are derived using the fact that, under these assumptions, the width function is a homogeneous Markov birth-death process. In particular, exact expressions are derived for the asymptotic conditional expectations of S and T given network magnitude N and given mainstream length H. In addition, a simulation study is performed to examine various predictors of S and T, including N, H, and basin morphometric properties; non-asymptotic conditional expectations and variances are estimated. The best single predictor of S is N, of T is H, and of the scaled peak (S divided by the area under the width function) is H. Finally, expressions tested on a set of drainage basins from the state of Wyoming perform reasonably well in predicting S and T despite probable violations of the original assumptions. ?? 1989 Springer-Verlag.

  9. Silicon Burning: Formation of the Iron Peak Nuclei

    Science.gov (United States)

    Hix, Wm. Raphael; Thielemann, Friederich-Karl

    1993-12-01

    As the most tightly bound nuclei, the 'Iron Peak' nuclei are the culmination of nuclear energy generation in astrophysical environments. Our re-examination of silicon burning, the mechanism by which the nuclei of the iron peak are produced, has revealed a number of potential improvements in the treatment of this ultimate stage of astrophysical nuclear energy generation. Previous work on Nuclear Statistical Equilibrium (NSE), the end state of silicon burning, has neglected the effect that Coulomb screening of capture reactions and their reverse reactions has on the equilibrium distribution, or assumed that these effects cancel, leaving an abundance distribution identical to that predicted in the absence of such screening. We find that the proper treatment of the screening of nuclear reactions in Nuclear Statistical Equilibrium (NSE), can produce significant differences in the relative abundances of the nuclei produced. This is particularly true at high density. Further, results gleaned from simulation work done with a large nuclear network (300 nuclei and 3000 reactions) and from independent calculations of NSE abundance distributions, offer new insights into the quasi-equilibrium mechanism and the approach to NSE. We will discuss methods which use this quasi-equilibrium mechanism to preserve the most important features of the large nuclear network calculations at a significant improvement in computational speed. Such improved methods are ideally suited for hydro- dynamic calculations which involve the production of iron peak nuclei, where the larger network calculation proves unmanageable.

  10. A new record peak luminosity for the LHC

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Two weeks of dedicated machine development paid off last weekend when the LHC ran for physics with three nominal intensity (∼1011 protons) bunches in each beam.   This brought a new record peak luminosity of around 8×1029 cm-2 s-1, and allowed the LHC to double the integrated luminosity delivered to the experiments since 30 March from 16 to 32 inverse nanobarns over the weekend. After a few more fills in this configuration, the number of bunches will be raised to six per beam, which will in turn allow the peak luminosity to break the 1030 cm-2 s-1 barrier for the first time, well on the way to achieving the 2010 objective of 1032 cm-2 s-1. This peak luminosity goal requires 800 nominal bunches per beam squeezed to a beta of 3.5 metres. The plan for 2011 is to run the LHC in this configuration over about 10 months, thus achieving the objective of recording one inverse femtobarn of data in total. The machine development period also allowed the TOTEM detectors to be set up with 45...

  11. Projectile remnants in central peaks of lunar impact craters

    Science.gov (United States)

    Yue, Z.; Johnson, B. C.; Minton, D. A.; Melosh, H. J.; di, K.; Hu, W.; Liu, Y.

    2013-06-01

    The projectiles responsible for the formation of large impact craters are often assumed to melt or vaporize during the impact, so that only geochemical traces or small fragments remain in the final crater. In high-speed oblique impacts, some projectile material may survive, but this material is scattered far down-range from the impact site. Unusual minerals, such as magnesium-rich spinel and olivine, observed in the central peaks of many lunar craters are therefore attributed to the excavation of layers below the lunar surface. Yet these minerals are abundant in many asteroids, meteorites and chondrules. Here we use a numerical model to simulate the formation of impact craters and to trace the fate of the projectile material. We find that for vertical impact velocities below about 12kms-1, the projectile may both survive the impact and be swept back into the central peak of the final crater as it collapses, although it would be fragmented and strongly deformed. We conclude that some unusual minerals observed in the central peaks of many lunar impact craters could be exogenic in origin and may not be indigenous to the Moon.

  12. Cycle Average Peak Fuel Temperature Prediction Using CAPP/GAMMA+

    Energy Technology Data Exchange (ETDEWEB)

    Tak, Nam-il; Lee, Hyun Chul; Lim, Hong Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    In order to obtain a cycle average maximum fuel temperature without rigorous efforts, a neutronics/thermo-fluid coupled calculation is needed with depletion capability. Recently, a CAPP/GAMMA+ coupled code system has been developed and the initial core of PMR200 was analyzed using the CAPP/GAMMA+ code system. The GAMMA+ code is a system thermo-fluid analysis code and the CAPP code is a neutronics code. The General Atomics proposed that the design limit of the fuel temperature under normal operating conditions should be a cycle-averaged maximum value. Nonetheless, the existing works of Korea Atomic Energy Research Institute (KAERI) only calculated the maximum fuel temperature at a fixed time point, e.g., the beginning of cycle (BOC) just because the calculation capability was not ready for a cycle average value. In this work, a cycle average maximum fuel temperature has been calculated using CAPP/GAMMA+ code system for the equilibrium core of PMR200. The CAPP/GAMMA+ coupled calculation was carried out for the equilibrium core of PMR 200 from BOC to EOC to obtain a cycle average peak fuel temperature. The peak fuel temperature was predicted to be 1372 .deg. C near MOC. However, the cycle average peak fuel temperature was calculated as 1181 .deg. C, which is below the design target of 1250 .deg. C.

  13. The bias of weighted dark matter halos from peak theory

    CERN Document Server

    Verde, Licia; Simpson, Fergus; Alvarez-Gaume, Luis; Heavens, Alan; Matarrese, Sabino

    2014-01-01

    We give an analytical form for the weighted correlation function of peaks in a Gaussian random field. In a cosmological context, this approach strictly describes the formation bias and is the main result here. Nevertheless, we show its validity and applicability to the evolved cosmological density field and halo field, using Gaussian random field realisations and dark matter N-body numerical simulations. Using this result from peak theory we compute the bias of peaks (and dark matter halos) and show that it reproduces results from the simulations at the ${\\mathcal O}(10\\%)$ level. Our analytical formula for the bias predicts a scale-dependent bias with two characteristics: a broad band shape which, however, is most affected by the choice of weighting scheme and evolution bias, and a more robust, narrow feature localised at the BAO scale, an effect that is confirmed in simulations. This scale-dependent bias smooths the BAO feature but, conveniently, does not move it. We provide a simple analytic formula to des...

  14. Climate change and peak demand for electricity: Evaluating policies for reducing peak demand under different climate change scenarios

    Science.gov (United States)

    Anthony, Abigail Walker

    This research focuses on the relative advantages and disadvantages of using price-based and quantity-based controls for electricity markets. It also presents a detailed analysis of one specific approach to quantity based controls: the SmartAC program implemented in Stockton, California. Finally, the research forecasts electricity demand under various climate scenarios, and estimates potential cost savings that could result from a direct quantity control program over the next 50 years in each scenario. The traditional approach to dealing with the problem of peak demand for electricity is to invest in a large stock of excess capital that is rarely used, thereby greatly increasing production costs. Because this approach has proved so expensive, there has been a focus on identifying alternative approaches for dealing with peak demand problems. This research focuses on two approaches: price based approaches, such as real time pricing, and quantity based approaches, whereby the utility directly controls at least some elements of electricity used by consumers. This research suggests that well-designed policies for reducing peak demand might include both price and quantity controls. In theory, sufficiently high peak prices occurring during periods of peak demand and/or low supply can cause the quantity of electricity demanded to decline until demand is in balance with system capacity, potentially reducing the total amount of generation capacity needed to meet demand and helping meet electricity demand at the lowest cost. However, consumers need to be well informed about real-time prices for the pricing strategy to work as well as theory suggests. While this might be an appropriate assumption for large industrial and commercial users who have potentially large economic incentives, there is not yet enough research on whether households will fully understand and respond to real-time prices. Thus, while real-time pricing can be an effective tool for addressing the peak load

  15. Trends in peak flows of selected streams in Kansas

    Science.gov (United States)

    Rasmussen, T.J.; Perry, C.A.

    2001-01-01

    The possibility of a systematic change in flood potential led to an investigation of trends in the magnitude of annual peak flows in Kansas. Efficient design of highway bridges and other flood-plain structures depends on accurate understanding of flood characteristics. The Kendall's tau test was used to identify trends at 40 stream-gaging stations during the 40-year period 1958-97. Records from 13 (32 percent) of the stations showed significant trends at the 95-percent confidence level. Only three of the records (8 percent) analyzed had increasing trends, whereas 10 records (25 percent) had decreasing trends, all of which were for stations located in the western one-half of the State. An analysis of flow volume using mean annual discharge at 29 stations in Kansas resulted in 6 stations (21 percent) with significant trends in flow volumes. All six trends were decreasing and occurred in the western one-half of the State. The Kendall's tau test also was used to identify peak-flow trends over the entire period of record for 54 stream-gaging stations in Kansas. Of the 23 records (43 percent) showing significant trends, 16 (30 percent) were decreasing, and 7 (13 percent) were increasing. The trend test then was applied to 30-year periods moving in 5-year increments to identify time periods within each station record when trends were occurring. Systematic changes in precipitation patterns and long-term declines in ground-water levels in some stream basins may be contributing to peak-flow trends. To help explain the cause of the streamflow trends, the Kendall's tau test was applied to total annual precipitation and ground-water levels in Kansas. In western Kansas, the lack of precipitation and presence of decreasing trends in ground-water levels indicated that declining water tables are contributing to decreasing trends in peak streamflow. Declining water tables are caused by ground-water withdrawals and other factors such as construction of ponds and terraces. Peak

  16. Automated Critical Peak Pricing Field Tests: Program Descriptionand Results

    Energy Technology Data Exchange (ETDEWEB)

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

    2006-04-06

    California utilities have been exploring the use of critical peak prices (CPP) to help reduce needle peaks in customer end-use loads. CPP is a form of price-responsive demand response (DR). Recent experience has shown that customers have limited knowledge of how to operate their facilities in order to reduce their electricity costs under CPP (Quantum 2004). While the lack of knowledge about how to develop and implement DR control strategies is a barrier to participation in DR programs like CPP, another barrier is the lack of automation of DR systems. During 2003 and 2004, the PIER Demand Response Research Center (DRRC) conducted a series of tests of fully automated electric demand response (Auto-DR) at 18 facilities. Overall, the average of the site-specific average coincident demand reductions was 8% from a variety of building types and facilities. Many electricity customers have suggested that automation will help them institutionalize their electric demand savings and improve their overall response and DR repeatability. This report focuses on and discusses the specific results of the Automated Critical Peak Pricing (Auto-CPP, a specific type of Auto-DR) tests that took place during 2005, which build on the automated demand response (Auto-DR) research conducted through PIER and the DRRC in 2003 and 2004. The long-term goal of this project is to understand the technical opportunities of automating demand response and to remove technical and market impediments to large-scale implementation of automated demand response (Auto-DR) in buildings and industry. A second goal of this research is to understand and identify best practices for DR strategies and opportunities. The specific objectives of the Automated Critical Peak Pricing test were as follows: (1) Demonstrate how an automated notification system for critical peak pricing can be used in large commercial facilities for demand response (DR). (2) Evaluate effectiveness of such a system. (3) Determine how customers

  17. Automated Critical Peak Pricing Field Tests: Program Descriptionand Results

    Energy Technology Data Exchange (ETDEWEB)

    Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Xu, Peng

    2006-04-06

    California utilities have been exploring the use of critical peak prices (CPP) to help reduce needle peaks in customer end-use loads. CPP is a form of price-responsive demand response (DR). Recent experience has shown that customers have limited knowledge of how to operate their facilities in order to reduce their electricity costs under CPP (Quantum 2004). While the lack of knowledge about how to develop and implement DR control strategies is a barrier to participation in DR programs like CPP, another barrier is the lack of automation of DR systems. During 2003 and 2004, the PIER Demand Response Research Center (DRRC) conducted a series of tests of fully automated electric demand response (Auto-DR) at 18 facilities. Overall, the average of the site-specific average coincident demand reductions was 8% from a variety of building types and facilities. Many electricity customers have suggested that automation will help them institutionalize their electric demand savings and improve their overall response and DR repeatability. This report focuses on and discusses the specific results of the Automated Critical Peak Pricing (Auto-CPP, a specific type of Auto-DR) tests that took place during 2005, which build on the automated demand response (Auto-DR) research conducted through PIER and the DRRC in 2003 and 2004. The long-term goal of this project is to understand the technical opportunities of automating demand response and to remove technical and market impediments to large-scale implementation of automated demand response (Auto-DR) in buildings and industry. A second goal of this research is to understand and identify best practices for DR strategies and opportunities. The specific objectives of the Automated Critical Peak Pricing test were as follows: (1) Demonstrate how an automated notification system for critical peak pricing can be used in large commercial facilities for demand response (DR). (2) Evaluate effectiveness of such a system. (3) Determine how customers

  18. Peak Bone Mass Measurement in Iranian Healthy Population

    Directory of Open Access Journals (Sweden)

    B Larijani

    2007-08-01

    Full Text Available Background: Osteoporosis is a disabling disease characterized by compromised bone strength, which predisposes a patient to increased risk of fracture. The aim of this study was evaluation the pattern of bone mass in Iranian healthy population. Methods: The study was performed between December 2000 and May 2001 on one thousand three healthy Iranian sub¬jects who currently live in Tehran. They were selected randomly by cluster random sampling among men and women of 10-76 yr from 50 clusters. The volunteer people were referred to the Bone Mineral Density BMD unit of EMRC. The partici¬pants were recalled for three times and the response rate was 83%. BMD was measured by DXA using Lunar DPX-MD device. Results: Females achieved maximum lumbar BMD up to 25-35. Femur BMD maximized in 30 to 35 and after 45 the inten¬sity of bone loss increased. Female peak bone mass in lumbar region was 1.19 ± 0.12 g/cm2and in femur was 1.02±0.12 g/cm2. Male peak bone mass in lumbar region occurred between ages 25-40 yr, Male's femur BMD maximized in 20-30. In male peak lumbar bone mass was 1.22±0.16 g/cm2 and femur was 1.08±0.15 g/cm2. Osteopenia was recog¬nized in 50% and 48.8% of women above 50 in spine and total femur, respectively, however these percentages were 37.1% and 34.8% among male subjects. Conclusion: Iranian BMD values sufficiently different from other countries to warrant a separate reference sample with which to compare individuals for the purpose of diagnosing osteoporosis and osteopenia according to the WHO criteria.

  19. Specific Intensity for Peaking: Is Race Pace the Best Option?

    Directory of Open Access Journals (Sweden)

    Munoz

    2015-09-01

    Full Text Available Background The peaking period for endurance competition is characterized for a relative increase of the intensity of training, after a longer period of training relatively dominated by lower intensity and higher volume Objectives The present study was designed to compare physiological and 10 km performance effects of high intensity training (HIT versus race pace interval training (RP during peaking for competition in well-trained runners. Patients and Methods 13 athletes took part in the study, they were divided into two groups: HIT and RP. HIT performed short intervals at ~105% of the maximal aerobic velocity (MAV, while RP trained longer intervals at a speed of ~90% of the MAV (a speed approximating 10 km race pace. After 12 weeks of baseline training, the athletes trained for 6 weeks under one of the two peaking regimes. Subjects performed 10 km prior to and after the intervention period. The total load of training was matched between groups during the treatment phase. Subjects completed a graded treadmill running test until volitional exhaustion prior to each 10 km race. MAV was determined as the minimal velocity eliciting maximal oxygen consumption (VO2max. Results Both groups significantly improved their 10 km time (35 minutes 29 seconds ± 1 minutes 41 seconds vs 34 minutes 53 seconds ± 1 minutes 55 seconds, P 0.05. In contrast, running economy decreased significantly after HIT (210 ± 6 ml.Kg-1.km-1 vs 218 ± 9, P < 0.05. Conclusions A 6 week period of training at either 105% of MAV or 90% of MAV yielded similar performance gains in a 10km race performed at ~90% MAV. Therefore, the physiological impact of HIT training seems to be positive for VO2max but negative for running economy.

  20. Adjustment of Peak Streamflows of a Tropical River for Urbanization

    Directory of Open Access Journals (Sweden)

    Ata Amini

    2009-01-01

    Full Text Available Peak runoff from a catchment is influenced by many factors such as intensity and duration of rainfall, catchment topography, catchment shape, land use and other variables. For a particular catchment, landuse change and other human activities will alter the characteristic of catchment hydrograph. Problem statement: As a result of urbanization, the magnitude of floods occurring in a catchment increased. It was found that the land use change in the Langat River catchment has clear impact on annual peak streamflow record, particularly from 1983-2003 while, the change has no significant impact on streamflow record from 1960-1982. Spatial data confirms the heavy development occurred in river basin from 1983-2003. Thus, urbanization makes the historical record of Langat River non-homogenous and this makes the mathematical simulation for the record inappropriate due to poor expected output. Approach: In this study, historical record of Langat River, Selangor, Malaysia from 1960-2003 was used to study the impact of urbanization on the streamflow. The annual peak streamflow was selected for this purpose. The peak streamflow record was divided into two sets. Set one from 1960-1982 and set two from 1983-2003, which represent periods before and after urbanization, respectively. To adjust the set one data for urbanization, different adjustment factors were used to make the data homogeneous. Normal model was applied to find the best factor for model fitness. Results: The best adjustment factors were selected by trial and error technique based on 95% confidence level. To determine the optimum adjustment factors from the best ones, the point of intersection between the homogeneity and Normal model evaluation curves was located. This point represented the optimum adjustment factor and its value was found to be 1.9. Autorun model was used to validate the above finding and it was found that the model prediction is acceptable with reasonable accuracy. Conclusion

  1. Numerical simulation of meteorological conditions for peak pollution in Paris

    Energy Technology Data Exchange (ETDEWEB)

    Carissimo, B. [Electricite de France (EDF), 78 - Chatou (France). Direction des Etudes et Recherches

    1997-06-01

    Results obtained on the simulation of meteorological conditions during two episodes of peak pollution in Paris are presented, one in the winter, the other in the summer. The A3UR air quality modelling system is first described followed by the MERCURE mesoscale meteorological model. The conditions of simulation are described. The results obtained on these two causes show satisfactory agreement, for example on the magnitude of the urban heat island which is correctly reproduced. In this study, several areas of progress have been identified: improvement of the altitude measurement network around cities, the simulation of light wind conditions and the simulation of formation and dissipation of fog. (author) 24 refs.

  2. Peaked and Smooth Solitons for K*(4,1 Equation

    Directory of Open Access Journals (Sweden)

    Yongan Xie

    2013-01-01

    Full Text Available This paper is contributed to explore all possible single peak solutions for the K*(4,1 equation ut=uxu2+2α(uuxxx+2uxuxx. Our procedure shows that the K*(4,1 equation either has peakon, cuspon, and smooth soliton solutions when sitting on a nonzero constant pedestal limξ→±∞u=A≠0 or possesses compacton solutions only when limξ→±∞u=A=0. We present a new smooth soliton solution in an explicit form. Mathematical analysis and numeric graphs are provided for those soliton solutions of the K*(4,1 equation.

  3. Gamma ray energy spectra to test the peak analysis

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Jong In; Song, Myeong Han; Yun, Ju Yong [University of Science and Technology, Daejeon (Korea, Republic of); Lee, Jee Yon; Row, Jung Whan [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2009-09-15

    Gamma ray energy spectra for testing of the spectrum analysis method were produced by using a HPGe detector system. Standard mixed sources emitting gamma ray were used for the purpose. The Monte Carlo Simulation method was utilized for the optimization of measurement condition for radioisotopes in the sources with cascade coincidence summing effects. Calibration spectrum and test spectrum including gamma ray energy peaks with various characteristics were created. The set of test spectra was independently analyzed by 28 spectrometrists in different analysis centers. The reasonability of the spectra was estimated by standard deviations of the intercomparison results of the radioactivity analysis of radioisotopes in the test spectrum.

  4. Peak intensity measurement of relativistic lasers via nonlinear Thomson scattering

    CERN Document Server

    Har-Shemesh, Omri

    2011-01-01

    The measurement of peak laser intensities exceeding $10^{20}\\;\\text{W/cm$^2$}$ is in general a very challenging task. We suggest a simple method to accurately measure such high intensities up to about $10^{23}\\,\\text{W/cm$^2$}$, by colliding a beam of ultrarelativistic electrons with the laser pulse. The method exploits the specific features of the angular distribution of the radiation emitted by ultrarelativistic electrons via nonlinear Thomson scattering. Initial electron energies well within the reach of laser wake-field accelerators are required, allowing in principle for an all-optical setup. Accuracies of the order of 10% are envisaged.

  5. Nonlinear generalization of Den Hartog's equal-peak method

    Science.gov (United States)

    Habib, G.; Detroux, T.; Viguié, R.; Kerschen, G.

    2015-02-01

    This study addresses the mitigation of a nonlinear resonance of a mechanical system. In view of the narrow bandwidth of the classical linear tuned vibration absorber, a nonlinear absorber, termed the nonlinear tuned vibration absorber (NLTVA), is introduced in this paper. An unconventional aspect of the NLTVA is that the mathematical form of its restoring force is tailored according to the nonlinear restoring force of the primary system. The NLTVA parameters are then determined using a nonlinear generalization of Den Hartog's equal-peak method. The mitigation of the resonant vibrations of a Duffing oscillator is considered to illustrate the proposed developments.

  6. Quasispecies theory for multiple-peak fitness landscapes

    Science.gov (United States)

    Munoz, Enrique; Saakian, David; Hu, Chin-Kun; Deem, Michael

    2007-03-01

    We used a path integral representation to solve the Eigen and Crow-Kimura molecular evolution models for the case of multiple fitness peaks with arbitrary fitness and degradation functions. In the general case, we find that the solution to these molecular evolution models can be written as the optimum of a fitness function, with constraints enforced by Lagrange multipliers and with a term accounting for the entropy of the spreading population in sequence space. The results for the Eigen model are applied to consider virus or cancer proliferation under the control of drugs or the immune system.

  7. Peak into the Past - An Archaeo-Astronomy Summer School

    OpenAIRE

    Brown, Daniel Stephen; Neale, N; Francis, R.

    2010-01-01

    Description:\\ud The delivery and impact of an archaeo-astronomy summer school for year 5-8 pupils,utilising local Peak District National Park monuments as an outdoor classroom.\\ud \\ud Abstract:\\ud Our landscape has been shaped by man throughout the millennia. It still contains many clues to how it was used in the past giving us insights into ancient cultures and their everyday life. Our summer school uses archaeology and astronomy as a focus for effective out-of-classroom learning experiences...

  8. Double passing the Kitt Peak 1-m Fourier transform spectrometer

    Science.gov (United States)

    Jennings, D. E.; Hubbard, R.; Brault, J. W.

    1985-01-01

    Attention is given to a simple technique for performing the conversion of the Kitt Peak 1-m Fourier transform spectrometer's dual input/output optical configuration to a double pass configuration that improves spectral resolution by a factor of 2. The modification is made by placing a flat mirror in the output beam from each cat's eye, retroreflecting the beams back through the cat's eyes to the first beam splitter. A single detector is placed at the second input port, which then becomes the instrument's output.

  9. Ultrafast, ultrahigh-peak power Ti:sapphire laser system

    Energy Technology Data Exchange (ETDEWEB)

    Yamakawa, Koichi; Aoyama, Makoto; Matsuoka, Shinichi; Akahane, Yutaka; Kase, Teiji; Nakano, Fumihiko; Sagisaka, Akito [Advanced Photon Research Center, Kansai Research Establishment, Japan Atomic Energy Research Inst., Kizu, Kyoto (Japan)

    2001-01-01

    We review progress in the generation of multiterawatt optical pulses in the 10-fs range. We describe a design, performance and characterization of a Ti:sapphire laser system based on chirped-pulse amplification, which has produced a peak power in excess of 100-TW with sub-20-fs pulse durations and an average power of 19-W at a 10-Hz repetition rate. We also discuss extension of this system to the petawatt power level and potential applications in the relativistic, ultrahigh intensity regimes. (author)

  10. A New Model of Peaks over Threshold for Multivariate Extremes

    Institute of Scientific and Technical Information of China (English)

    罗耀; 朱良生

    2014-01-01

    The peaks over threshold (POT) methods are used for the univariate and multivariate extreme value analyses of the wave and wind records collected from a hydrometric station in the South China Sea. A new multivariate POT method:Multivariate GPD (MGPD) model is proposed, which can be built easily according to developed parametric models and is a natural distribution of multivariate POT methods. A joint threshold selection approach is used in the MGPD model well. Finally, sensitivity analyses are carried out to calculate the return values of the base shear, and two declustering schemes are compared in this study.

  11. Applications of timing theories to a peak procedure.

    Science.gov (United States)

    Yi, Linlin

    2007-06-01

    This article describes applications of scalar expectancy theory (SET), learning-to-time theory (LeT), and Packet theory to data from a peak procedure. Twelve rats were trained in a multiple cued-interval procedure with two fixed intervals (60 and 120 s) signaled by houselight and white noise. Twenty-five percent of the cycles were nonfood cycles, which were 360 s long and had no reinforcement. Mean and individual response rates on nonfood cycles were fitted with explicit solutions of SET, LeT and Packet theory. Applications of the three timing theories were compared in terms of goodness of fit and complexity.

  12. Reducing Electricity Demand Peaks by Scheduling Home Appliances Usage

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana; Kardaras, Georgios; Iversen, Villy Bæk

    2011-01-01

    (RFS) algorithm, which was originally developed for telecommunication networks, is applied. The purpose is to analyze how a power consumption limit and priorities for home appliances will affect the demand peak and the users’ everyday life. Verification of the effectiveness of the RFS algorithm is done....... Moreover, users can be granted lower electricity bill rates for accepting delaying the operation of some of their appliances. In order to analyze this scenario, teletraffic engineering theory, which is used in evaluating the performance of telecommunication networks, is used. A reversible fair scheduling...

  13. Modelling and Analysis of High Pressure Peaking Switch

    Science.gov (United States)

    S, Bindu; Parekh, Mrunal; Mangalvedekar, H. A.; Sharma, Archana; Chakravarthy, D. P.

    2012-07-01

    This paper presents modelling and analysis of peaking switch used in Marx generator, such that the rise time of the pulse produced by the Marx generator is reduced substantially. Towards this FEMM (Finite Element Methods Magnetics) software is used for the field modelling of the switch and MATLAB for circuit modelling to observe the rise time. The switch has to produce pulse with sub-nanosecond rise time, hence the electrode distance has to be minimum. This switch can withstand high voltage only under high pressure. A mathematical model is simulated in MATLAB to see the performance under high pressure.

  14. Simultaneous EEG and EMG biofeedback for peak performance in musicians.

    Science.gov (United States)

    Markovska-Simoska, Silvana; Pop-Jordanova, Nada; Georgiev, Dejan

    2008-07-01

    The aim of this study was to determine the effects of alpha neurofeedback and EMG biofeedback protocols for improvement of musical performance in violinists. The sample consisted of 12 music students (10 violinists and 2 viola players) from the Faculty of Music, Skopje (3 males, mean age of 20 +/- 0 and 9 females, mean age = 20.89 +/- 2.98). Six of them had a low alpha peak frequency (APF) ( 10 Hz). The sample was randomized in two groups. The students from the experimental group participated in 20 sessions of biofeedback (alpha/EMG), combined with music practice, while the students from the control group did only music practice. Average absolute power, interhemispheric coherence in the alpha band, alpha peak frequency (APF), individual alpha band width (IABW), amount of alpha suppression (AAS) and surface forehead integrated EMG power (IEMG), as well as a score on musical performance and inventories measuring anxiety, were assessed. Alpha-EEG/EMG-biofeedback was associated with a significant increase in average alpha power, APF and IABW in all the participants and with decreases in IEMG only in high-APF musicians. The biofeedback training success was positively correlated with the alpha power, IcoH, APF, IABW and baseline level of APF and IABW. Alpha-EEG/EMG biofeedback is capable of increasing voluntary self-regulation and the quality of musical performance. The efficiency of biofeedback training depends on the baseline EEG alpha activity status, in particular the APF.

  15. GRB physics and cosmology with peak energy-intensity correlations

    Energy Technology Data Exchange (ETDEWEB)

    Sawant, Disha, E-mail: sawant@fe.infn.it [University of Ferrara, Via Saragat-1, Block C, Ferrara 44122 (Italy); University of Nice, 28 Avenue Valrose, Nice 06103 (France); IRAP Erasmus PhD Program, European Union and INAF - IASF Bologna, Via P. Gobetti 101, Bologna 41125 (Italy); Amati, Lorenzo, E-mail: amati@iasfbo.inaf.it [INAF - IASF Bologna, Via P. Gobetti 101, Bologna 41125 (Italy); ICRANet, Piazzale Aldo Moro-5, Rome 00185 (Italy)

    2015-12-17

    Gamma Ray Bursts (GRBs) are immensely energetic explosions radiating up to 10{sup 54} erg of energy isotropically (E{sub iso}) and they are observed within a wide range of redshift (from ∼ 0.01 up to ∼ 9). Such enormous power and high redshift point at these phenomena being highly favorable to investigate the history and evolution of our universe. The major obstacle in their application as cosmological study-tools is to find a way to standardize the GRBs, for instance similar to SNe Ia. With respect to this goal, the correlation between spectral peak energy (E{sub p,i}) and the “intensity” is a positively useful and investigated criterion. Moreover, it has been demonstrated that, through the E{sub p,i} – E{sub iso} correlation, the current data set of GRBs can already contribute to the independent evidence of the matter density Ω{sub M} being ∼ 0.3 for a flat universe scenario. We try to inspect and compare the correlations of E{sub p,i} with different intensity indicators (e.g., radiated energy, average and peak luminosity, bolometric vs. monochromatic quantities, etc.) both in terms of intrinsic dispersion and precise estimation of Ω{sub M}. The outcome of such studies are further analyzed in verifying the reliability of the correlations for both GRB physics and their standardization for cosmology.

  16. GRB physics and cosmology with peak energy-intensity correlations

    Science.gov (United States)

    Sawant, Disha; Amati, Lorenzo

    2015-12-01

    Gamma Ray Bursts (GRBs) are immensely energetic explosions radiating up to 1054 erg of energy isotropically (Eiso) and they are observed within a wide range of redshift (from ˜ 0.01 up to ˜ 9). Such enormous power and high redshift point at these phenomena being highly favorable to investigate the history and evolution of our universe. The major obstacle in their application as cosmological study-tools is to find a way to standardize the GRBs, for instance similar to SNe Ia. With respect to this goal, the correlation between spectral peak energy (Ep,i) and the "intensity" is a positively useful and investigated criterion. Moreover, it has been demonstrated that, through the Ep,i - Eiso correlation, the current data set of GRBs can already contribute to the independent evidence of the matter density ΩM being ˜ 0.3 for a flat universe scenario. We try to inspect and compare the correlations of Ep,i with different intensity indicators (e.g., radiated energy, average and peak luminosity, bolometric vs. monochromatic quantities, etc.) both in terms of intrinsic dispersion and precise estimation of ΩM. The outcome of such studies are further analyzed in verifying the reliability of the correlations for both GRB physics and their standardization for cosmology.

  17. Steam generator deposit control program assessment at Comanche Peak

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, J.; Fellers, B. [TXU Electric (United States); Orbon, S. [Westinghouse (United States)

    2002-07-01

    Comanche Peak has employed a variety of methods to assess the effectiveness of the deposit control program. These include typical methods such as an extensive visual inspection program and detailed corrosion product analysis and trending. In addition, a recently pioneered technique, low frequency eddy current profile analysis (LFEC) has been utilized. LFEC provides a visual mapping of the magnetite deposit profile of the steam generator. Analysis of the LFEC results not only provides general area deposition rates, but can also provide local deposition patterns, which is indicative of steam generator performance. Other techniques utilized include trending of steam pressure, steam generator hideout-return, and flow assisted corrosion (FAC) results. The sum of this information provides a comprehensive assessment of the deposit control program effectiveness and the condition of the steam generator. It also provides important diagnostic and predictive information relative to steam generator life management and mitigative strategies, such as special cleaning procedures. This paper discusses the techniques employed by Comanche Peak Chemistry to monitor the effectiveness of the deposit control program and describes how this information is used in strategic planning. (authors)

  18. Magnesium isotope fractionation during differentiation of Harney Peak granite

    Science.gov (United States)

    Ke, S.; Teng, F.; Walker, R. J.

    2009-12-01

    Although numerous studies have sought to constrain the Mg isotopic composition of mantle rocks, few studies have focused on the Mg isotopic compositions of crustal rocks, particularly evolved igneous rocks, such as granites. Granites are a major component of the upper continental crust and can be produced by partial melting of the deep continental crust. Studies of granites, therefore, can potentially provide important constraints on Mg isotopic composition variations in the continental crust as related to sources and petrogenetic processes. In order to explore the behavior of Mg isotopes during partial melting of continental crust, as well as granite differentiation, we have begun a study of a set of well-characterized samples from S-type Harney Peak granite, its potential source rocks and associated Tin Mountain pegmatite from Black Hills, South Dakota, USA. δ26Mg values of Harney Peak granites and Tin Mountain pegmatite vary significantly (from -0.69 to +0.11), well beyond the range of their potential source rocks (from -0.40 to +0.15) — early Proterozoic schists and late Archean metagranites. The large Mg isotopic variations within the granite suite likely, in part, reflect heterogeneities in source rocks, as previously shown for oxygen and Nd isotopes. A greater cause of the variations may be fractionations that occur during partial melting and subsequent differentiation of granitic melts, as suggested by the correlations between δ26Mg with SiO2, Al2O3, Na2O and Sr.

  19. Magnetar Driven Shock Breakout and Double Peaked Supernova Light Curves

    CERN Document Server

    Kasen, Daniel; Bildsten, Lars

    2015-01-01

    The light curves of some luminous supernovae are suspected to be powered by the spindown energy of a rapidly rotating magnetar. Here we describe a possible signature of the central engine: a burst of shock breakout emission occurring several days after the supernova explosion. The energy input from the magnetar inflates a high-pressure bubble that drives a shock through the pre-exploded supernova ejecta. If the magnetar is powerful enough, that shock will near the ejecta surface and become radiative. At the time of shock breakout, the ejecta will have expanded to a large radius (~10^{14} cm) so that the radiation released is at optical/ultraviolet wavelengths (T ~ 20,000 K) and lasts for several days. The luminosity and timescale of this magnetar driven shock breakout are similar to the first peak observed recently in the double-peaked light curve of SN-LSQ14BDQ. However, for a large region of model parameter space, the breakout emission is predicted to be dimmer than the diffusive luminosity from direct magn...

  20. Extrasolar Planet Transits Observed at Kitt Peak National Observatory

    CERN Document Server

    Sada, Pedro V; Jennings, Donald E; Jackson, Brian K; Hamilton, Catrina M; Fraine, Jonathan; Peterson, Steven W; Haase, Flynn; Bays, Kevin; Lunsford, Allen; O'Gorman, Eamon

    2012-01-01

    We obtained J-, H- and JH-band photometry of known extrasolar planet transiting systems at the 2.1-m Kitt Peak National Observatory Telescope using the FLAMINGOS infrared camera between October 2008 and October 2011. From the derived lightcurves we have extracted the mid-transit times, transit depths and transit durations for these events. The precise mid-transit times obtained help improve the orbital periods and also constrain transit-time variations of the systems. For most cases the published system parameters successfully accounted for our observed lightcurves, but in some instances we derive improved planetary radii and orbital periods. We complemented our 2.1-m infrared observations using CCD z'-band and B-band photometry (plus two Hydrogen Alpha filter observations) obtained with the Kitt Peak Visitor's Center telescope, and with four H-band transits observed in October 2007 with the NSO's 1.6-m McMath-Pierce Solar Telescope. The principal highlights of our results are: 1) our ensemble of J-band plane...

  1. Fuzzy peak hour for urban road traffic network

    Science.gov (United States)

    Tian, Zhao; Jia, Li-Min; Dong, Hong-Hui; Zhang, Zun-Dong; Ye, Yang-Dong

    2015-06-01

    Traffic congestion is now nearly ubiquitous in many urban areas and frequently occurs during rush hour periods. Rush hour avoidance is an effective way to ease traffic congestion. It is significant to calculate the rush hour for alleviating traffic congestion. This paper provides a method to calculate the fuzzy peak hour of the urban traffic network considering the flow, speed and occupancy. The process of calculation is based on betweenness centrality of network theory, optimal separation method, time period weighting, probability-possibility transformations and trapezoidal approximations of fuzzy numbers. The fuzzy peak hour of the urban road traffic network (URTN) is a trapezoidal fuzzy number [m1, m2, m3, m4]. It helps us (i) to confirm a more detailed traffic condition at each moment, (ii) to distinguish the five traffic states of the traffic network in one day, (iii) to analyze the characteristic of appearance and disappearance processes of the each traffic state and (iv) to find out the time pattern of residents travel in one city.

  2. Slope Morphology of Twin Peaks, Mars Pathfinder Landing Site

    Science.gov (United States)

    Hobbs, Steven; Paine, Colin; Clarke, Jon; Caprarelli, Graziella

    2010-05-01

    Development of slope form over time has long been a concern of geomorphologists, although recently this concern has been moved to slope processes rather than form. There are two basic approaches. The first is theoretical, involving modeling of different types and rates of processes, and calculation of results in terms of slope evolution over time. Comparisons with real-life slopes can follow this approach [1], [2]. The second, inductive, approach involves field measurements to test ideas about slope evolution starting from the assumption that observed slopes represent different stages of an essentially similar evolution [3]. Space is substituted for time, and a number of slopes, assumed to be of increasing age, are measured and placed in an evolutionary sequence (e.g. [4], [5], [6]). [5] showed that slope angles are modally distributed, with the modal angles controlled by the materials (regolith) of which the slopes are formed, and by the processes operating on them. Data can be obtained directly from field work or from digital elevation models (DEM) derived from remote sensing investigations [7]. DEMs are particularly useful to study inaccessible planets, such as Mars, where on site observations are restricted to only a few landing sites. Here we present a study of slopes on the Twin Peaks, two small hills located 780 m north and 910 m south of the Mars Pathfinder landing site at the mouth of the Ares and Tiu flood channels. The presence of streamlined hills, jumbled surfaces and conglomerates suggested the region was modified by massive flooding 1.8 - 3.5 billion years ago [8], [9]. The streamlined forms and terraces of the Twin Peaks were taken to indicate catastrophic flood conditions that were believed to be prevalent in the area [8]. It was also suggested that the northernmost peak was topped by floodwater, causing its flatter appearance. Other researchers postulated alternative geomorphological origins for the features observed at the Pathfinder landing site

  3. Peak oil and Economics: Some lessons from Offshore

    Energy Technology Data Exchange (ETDEWEB)

    Mourik, Maarten van [Karmsund (Norway)

    2002-07-01

    Nature's habit of putting much oil in a few large fields and much less in many small ones means high activity is needed to sustain production levels, let alone grow it. Money's imperative means high production fast, i.e. Deplete rapidly. In the meantime, equipment markets spoil the party by being a constraint and thus pushing up prices/costs, resulting in fewer wells and holding back peak production both in level and in time (as do merging oil companies). The examples from offshore can readily be applied to other areas or types of oil being developed. It goes for the oil sands developments in Canada, but also for the projects in Russia. Even there, a massive build-up in production will require large amounts of equipment. It may be available, or it may not be available. And there too, the Western approach of developing oil means faster production against a loss of recoverable resources in many cases. The best bet is that the build-up will be slower, leading to a lower peak for a longer period.

  4. Acetaminophen overdose associated with double serum concentration peaks

    Directory of Open Access Journals (Sweden)

    Cristian Papazoglu

    2015-12-01

    Full Text Available Acetaminophen is the most commonly used analgesic–antipyretic medication in the United States. Acetaminophen overdose, a frequent cause of drug toxicity, has been recognized as the leading cause of fatal and non-fatal hepatic necrosis. N-Acetylcysteine is the recommended antidote for acetaminophen poisoning. Despite evidence on the efficacy of N-acetylcysteine for prevention of hepatic injury, controversy persists about the optimal duration of the therapy. Here, we describe the case of a 65-year-old male with acetaminophen overdose and opioid co-ingestion who developed a second peak in acetaminophen serum levels after completing the recommended 21-hour intravenous N-acetylcysteine protocol and when the standard criteria for monitoring drug levels was achieved. Prolongation of N-acetylcysteine infusion beyond the standard protocol, despite a significant gap in treatment, was critical for successful avoidance of hepatotoxicity. Delay in acetaminophen absorption may be associated with a second peak in serum concentration following an initial declining trend, especially in cases of concomitant ingestion of opioids. In patients with acetaminophen toxicity who co-ingest other medications that may potentially delay gastric emptying or in those with risk factors for delayed absorption of acetaminophen, we recommend close monitoring of aminotransferase enzyme levels, as well as trending acetaminophen concentrations until undetectable before discontinuing the antidote therapy.

  5. Using Energy Peaks to Measure New Particle Masses

    CERN Document Server

    Agashe, Kaustubh; Kim, Doojin

    2014-01-01

    We discussed in arXiv:1209.0772 that the laboratory frame distribution of the energy of a massless particle from a two-body decay at a hadron collider has a peak whose location is identical to the value of this daughter's (fixed) energy in the rest frame of the corresponding mother particle. For that result to hold we assumed that the mother is unpolarized and has a generic boost distribution in the laboratory frame. In this work we discuss how this observation can be applied for determination of masses of new particles, without requiring a full reconstruction of their decay chains or information about the rest of the event. We focus on a two-step cascade decay of a massive particle that has one invisible particle in the final state: C -> Bb -> Aab, where C, B and A are new particles of which A is invisible and a, b are visible particles. Combining the measurements of the peaks of energy distributions of a and b with that of the edge in their invariant mass distribution, we demonstrate that it is in principle...

  6. The relationship of AIS to peak virtual power.

    Science.gov (United States)

    Neal-Sturgess, C E; Hassan, A; Cuerden, R

    2001-01-01

    All injuries require an expenditure of energy. Here it is postulated that injury severity is proportional to Peak Virtual Power (PVP). PVP is compared to AIS scores for frontal impact with belted drivers, for all types of injuries and all body regions, from the Co-operative Crash Injury Study (CCIS) and NASS-CDS databases. The excellent correlations obtained show that the AIS score is linearly proportional to Peak Virtual Power, which is proportional to delta V3 for restrained occupants, and delta V2 for unrestrained occupants. Therefore, although phenomenological, AIS appears to measure a physical quantity. It is concluded that there appears to be a "Master Curve" of AIS versus mean delta V for car occupants, implying that the amount of power for a given injury level is a constant, irrespective of injury type. There appear to be significant differences between the AIS scores for abdominal injuries between CCIS and NASS-CDS, and detailed case studies should be conducted to resolve the differences.

  7. An analysis of Super typhoon Rammasun's(2014) peak intensity

    Science.gov (United States)

    Cai, Qinbo; Xu, Yinglong

    2016-04-01

    Super typhoon Rammasun (2014) made landfall over Hainan Island, China, at 0730UTC 18 July 2014. Due to the damage of the anemometers, the Automatic Weather Stations (AWS) and the bouy which by Rammasun passed, failed to obtain its peak wind. Lack of the direct evident, in real-time monitoring, its peak intensities were given by 110kts (.i.e. 60m/s)/910hPa,135kts/922hPa , and 90kts/935hPa based on Dvorak technique , which were made by China Meteorological Administration (CMA),Joint Typhoon Warning Center(JTWC), and Japan Meteorological Agency (JMA) respectively. However, a minimum pressure of 881.2hPa recorded by a barometer which located at Qixhou island (19.982︒N,111.269︒E) while Rammasun approaching, indicates that its intensity was under estimated. By using observation data such as AWS, satellite, Doppler radar and wind tower near the ground, this study performs a detail evaluation to obtain its actual intensity. At 0521UTC, Qizhou Island station recorded 881.2hPa of the minimum station pressure and 899.2hPa of minimum sea level pressure (MSLP) while the anemometer had been destroyed. These are the lowest records in Chinese history and also are ones of the global lowest pressures obtained directly by barometer. It is evident that Rammasun's eyewall did not pass across Qizhou Island directly, so the actual MSLP should be lower than 899.2hPa. By applying wind-pressure relationship, it is reckoned that the reasonable MSLP and peak wind of Rammasun should be 888hPa and 70-76m/s, which makes Rammasun the strongest typhoon ever made landfall in China's history. In order to intuitively investigate the real intensity of Ramasun, eyewall structures are compared with some historical extreme typhoons (hurricanes) such as Saomai(2006), Haiyan(2013) and Katrina(2005). Satellite images show that the dense overcast convection strength of Rammasun is stronger than those when Saomai and Katrina were in their peak intensities and before landing, but weaker than Haiyan. The

  8. Electron beam stability and beam peak to peak motion data for NSLS X-Ray storage ring

    Energy Technology Data Exchange (ETDEWEB)

    Singh, O.

    1993-07-01

    In the past two years, a significant reduction in electron beam motion has been achieved at the NSLS X-Ray storage ring. The implementation of global analog orbit feedbacks, based on a harmonics correction scheme, has reduced the beam motion globally. Implementation of six local analog feedback systems has reduced the beam motion even further at the corresponding beam line straight sections. This paper presents beam motion measurements, showing the improvement due to the feedback systems. Beam motion is measured using a spectrum analyzer and data is presented at various frequencies, where peaks were observed. Finally, some of the beam motion sources are discussed.

  9. Technical Potential for Peak Load Management Programs in New Jersey

    Energy Technology Data Exchange (ETDEWEB)

    Kirby, B.J.

    2002-12-13

    Restructuring is attempting to bring the economic efficiency of competitive markets to the electric power industry. To at least some extent it is succeeding. New generation is being built in most areas of the country reversing the decades-long trend of declining reserve margins. Competition among generators is typically robust, holding down wholesale energy prices. Generators have shown that they are very responsive to price signals in both the short and long term. But a market that is responsive only on the supply side is only half a market. Demand response (elasticity) is necessary to gain the full economic advantages that restructuring can offer. Electricity is a form of energy that is difficult to store economically in large quantities. However, loads often have some ability to (1) conveniently store thermal energy and (2) defer electricity consumption. These inherent storage and control capabilities can be exploited to help reduce peak electric system consumption. In some cases they can also be used to provide system reliability reserves. Fortunately too, technology is helping. Advances in communications and control technologies are making it possible for loads ranging from residential through commercial and industrial to respond to economic signals. When we buy bananas, we don't simply take a dozen and wait a month to find out what the price was. We always ask about the price before we decide how many bananas we want. Technology is beginning to allow at least some customers to think about their electricity consumption the same way they think about most of their other purchases. And power system operators and regulators are beginning to understand that customers need to remain in control of their own destinies. Many customers (residential through industrial) are willing to respond to price signals. Most customers are not able to commit to specific responses months or years in advance. Electricity is a fluid market commodity with a volatile value to both

  10. Peak Ground Acceleration on Bedrock of Natanz, Iran

    Directory of Open Access Journals (Sweden)

    Bakouchi .emad

    2016-12-01

    Full Text Available The present paper was done under the title of peak ground acceleration(PGA on bedrock for natanz city. A set of seismic sources, historical and instrumental seismicity data within the radius of 150 kilometers from the city center since the year 1700 until now has been collected and used. Kijko[2000] method has been applied for estimating the seismic parameters considering lack of suitable seismic data, inaccuracy of the available information and uncertainty of magnitude in different periods. The calculations were performed by using the logic tree method, three weighted attenuation relationships were used; including Ghodrati et al (2007, 0.4; Ambraseys et al (1996, 0.3 ; Campbellbozorgnia (2000, 0.3 . The SEISRISKIII (1987 software was used to calculate the earthquake hazard. The results of this analysis were submitted for 10% and 2% probability of event in 50 years.

  11. Aconcagua peak geodynamics from GPS observations, Mendoza, Argentina: preliminary results

    Directory of Open Access Journals (Sweden)

    M. L. Mateo

    2009-12-01

    Full Text Available In 2005, the SIGMA Program (Mount Aconcagua GNSS Research System was implemented to investigate the geodynamics of the Aconcagua mountain region in the Central Andes. For this purpose, a continuously recording GPS station, ACON, was installed on the summit of Mount Aconcagua at 6.292 m a.s.l. The installation required special technology to support the equipment under extreme climatic conditions. The power supply system was optimized in 2008, so that a greater quantity of data could be recorded. This, in turn, will lead to more accurate estimates of displacement of the Aconcagua peak. Preliminary results from the ACON station indicate an average horizontal velocity of 0.023±0.0001 m/yr toward NE in 2 time windows between 2006 and 2008.

  12. DOA Estimation with Local-Peak-Weighted CSP

    Directory of Open Access Journals (Sweden)

    Ichikawa Osamu

    2010-01-01

    Full Text Available This paper proposes a novel weighting algorithm for Cross-power Spectrum Phase (CSP analysis to improve the accuracy of direction of arrival (DOA estimation for beamforming in a noisy environment. Our sound source is a human speaker and the noise is broadband noise in an automobile. The harmonic structures in the human speech spectrum can be used for weighting the CSP analysis, because harmonic bins must contain more speech power than the others and thus give us more reliable information. However, most conventional methods leveraging harmonic structures require pitch estimation with voiced-unvoiced classification, which is not sufficiently accurate in noisy environments. In our new approach, the observed power spectrum is directly converted into weights for the CSP analysis by retaining only the local peaks considered to be harmonic structures. Our experiment showed the proposed approach significantly reduced the errors in localization, and it showed further improvements when used with other weighting algorithms.

  13. Bifurcation behaviours of peak current controlled PFC boost converter

    Institute of Scientific and Technical Information of China (English)

    Ren Hai-Peng; Liu Ding

    2005-01-01

    Bifurcation behaviours of the peak current controlled power-factor-correction (PFC) boost converter, including fast-scale instability and low-frequency bifurcation, are investigated in this paper. Conventionally, the PFC converter is analysed in continuous conduction mode (CCM). This prevents us from recognizing the overall dynamics of the converter. It has been pointed out that the discontinuous conduction mode (DCM) can occur in the PFC boost converter, especially in the light load condition. Therefore, the DCM model is employed to analyse the PFC converter to cover the possible DCM operation. By this way, the low-frequency bifurcation diagram is derived, which makes the route from period-double bifurcation to chaos clear. The bifurcation diagrams versus the load resistance and the output capacitance also indicate the stable operation boundary of the converter, which is useful for converter design.

  14. Error Thresholds in Single-Peak Gaussian Distributed Fitness Landscapes

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the Eigen and Crow-Kimura models with a single-peak fitness landscape, we propose the fitness values of all sequence types to be Gaussian distributed random variables to incorporate the effects of the fluctuations of the fitness landscapes (noise of environments) and investigate the concentration distribution and error threshold of quasispecies by performing an ensemble average within this theoretical framework. We find that a small fluctuation of the fitness landscape causes only a slight change in the concentration distribution and error threshold, which implies that the error threshold is stable against small perturbations. However, for a sizable fluctuation, quite different from the previous deterministic models, our statistical results show that the transition from quasispecies to error catastrophe is not so sharp, indicating that the error threshold is located within a certain range and has a shift toward a larger value. Our results are qualitatively in agreement with the experimental data and provide a new implication for antiviral strategies.

  15. Robust Majorana Conductance Peaks for a Superconducting Lead

    Science.gov (United States)

    Peng, Yang; Pientka, Falko; Vinkler-Aviv, Yuval; Glazman, Leonid I.; von Oppen, Felix

    2015-12-01

    Experimental evidence for Majorana bound states largely relies on measurements of the tunneling conductance. While the conductance into a Majorana state is in principle quantized to 2 e2/h , observation of this quantization has been elusive, presumably due to temperature broadening in the normal-metal lead. Here, we propose to use a superconducting lead instead, whose gap strongly suppresses thermal excitations. For a wide range of tunneling strengths and temperatures, a Majorana state is then signaled by symmetric conductance peaks at e V =±Δ of a universal height G =(4 -π )2 e2/h . For a superconducting scanning tunneling microscope tip, Majorana states appear as spatial conductance plateaus while the conductance varies with the local wave function for trivial Andreev bound states. We discuss effects of nonresonant (bulk) Andreev reflections and quasiparticle poisoning.

  16. An Improved Peak Sidelobe Reduction Method for Subarrayed Beam Scanning

    Directory of Open Access Journals (Sweden)

    Hang Hu

    2015-01-01

    Full Text Available This paper focused on PSL (peak sidelobe level reduction for subarrayed beam scanning in phased array radars. The desired GSP (Gaussian Subarray Patterns are achieved by creating a subarray weighting network. The GSP-based method could reduce PSL of array pattern; compared with the method based on the desired subarray pattern which is defined by ideal space-domain filter, the PSL reduction performance is improved remarkably. Further, based on the concept adopting superelement patterns to approximately express original subarray patterns, the simplified GSP-based method is proposed. So the dimension of each matrix required for creating the weighting network, which was originally the same as the element number, could be reduced to the same as the subarray number. Consequently, we achieve remarkable reduction of the computation burden; simultaneously, the PSL mitigation performance is degraded slightly. Simulation results demonstrate the validity of the introduced methods.

  17. Implications of "peak oil" for atmospheric CO2 and climate

    CERN Document Server

    Kharecha, P A

    2007-01-01

    Peaking of global oil production may have a large effect on future atmospheric CO2 amount and climate change, depending upon choices made for subsequent energy sources. We suggest that, if estimates of oil and gas reserves by the Energy Information Administration are realistic, it is feasible to keep atmospheric CO2 from exceeding approximately 450 ppm, provided that future exploitation of the huge reservoirs of coal and unconventional fossil fuels incorporates carbon capture and sequestration. Existing coal-fired power plants, without sequestration, must be phased out before mid-century to achieve this limit on atmospheric CO2. We also suggest that it is important to "stretch" oil reserves via energy efficiency, thus avoiding the need to extract liquid fuels from coal or unconventional fossil fuels. We argue that a rising price on carbon emissions is probably needed to keep CO2 beneath the 450 ppm ceiling.

  18. Edge Detection Operators: Peak Signal to Noise Ratio Based Comparison

    Directory of Open Access Journals (Sweden)

    D. Poobathy

    2014-09-01

    Full Text Available Edge detection is the vital task in digital image processing. It makes the image segmentation and pattern recognition more comfort. It also helps for object detection. There are many edge detectors available for pre-processing in computer vision. But, Canny, Sobel, Laplacian of Gaussian (LoG, Robert’s and Prewitt are most applied algorithms. This paper compares each of these operators by the manner of checking Peak signal to Noise Ratio (PSNR and Mean Squared Error (MSE of resultant image. It evaluates the performance of each algorithm with Matlab and Java. The set of four universally standardized test images are used for the experimentation. The PSNR and MSE results are numeric values, based on that, performance of algorithms identified. The time required for each algorithm to detect edges is also documented. After the Experimentation, Canny operator found as the best among others in edge detection accuracy.

  19. Coating service experience with a peak load power gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Rybnikov, A.I.; Tchizhik, A.A.; Getsov, L.B. [The Polzunov Central Boiler and Turbine Inst., St. Petersburg (Russian Federation); Leontiev, S.A. [Leningradsky Metallitchesky Zavod, St. Petersburg (Russian Federation); Osyka, A.S. [State Area Power Station N3 of Mosenegro, Elektrogorsk (Russian Federation); Malashenko, I.S. [E.O. Paton Electric Welding Inst., Kiev (Ukraine)

    1995-12-01

    This paper deals with results of industrial service of turbine blades (rotating blades) made of E1893 alloy with CoCrA1Y and CoCrA1Y/YSZ coatings and of nozzle vanes made of ZhS6K with diffusion Cr-Fe coating of the gas turbine system with the peak power GT100 working in the various regions of Russia. The use of CoCrA1Y coatings retarded the formation of considerable corrosion damages, but after 7500 hours of operation pit corrosion was observed to appear in the diffusion and overlay coatings and in the base metal of buckets and nozzle vanes. The outer ceramic layer can increase the service life of turbine buckets, because sulphur compounds some difficulties to reach the surface of the coating metallic layer. (orig.)

  20. Elastic-wave generation in the evolution of displacement peaks

    Energy Technology Data Exchange (ETDEWEB)

    Zhukov, V.P.; Boldin, A.A.

    1988-06-01

    This paper investigated the character of elastic shock wave generation and damping in irradiated materials along with the possibility of their long-range influence on the structure of the irradiated materials. Dispersion at the elastoplastic stage of atomic displacement peak development was taken into account. The three-dimensional nonlinear wave was described by an equation in the approximation of weak nonlinearity and weak spatial dispersion. Numerical modeling of the propagation of a plane shock wave in a crystal lattice was conducted. The distribution of the density and mass velocity of the material at the instant of complete damping of the plastic shock-wave component was determined. The appearance of solitary waves (solitons) at large amplitudes, localized in space, which propagate without distortion to arbitrary distances and retain their amplitude and form in interacting with one another, was investigated. Some physical consequences of the influence of solitary waves on the irradiated materials were considered.

  1. Peak streamflow on selected streams in Arkansas, December 2015

    Science.gov (United States)

    Breaker, Brian K.

    2017-01-11

    Heavy rainfall during December 2015 resulted in flooding across parts of Arkansas; rainfall amounts were as high as 12 inches over a period from December 27, 2015, to December 29, 2015. Although precipitation accumulations were highest in northwestern Arkansas, significant flooding occurred in other parts of the State. Flood damage occurred in several counties as water levels rose in streams, and disaster declarations were declared in 32 of the 75 counties in Arkansas.Given the severity of the December 2015 flooding, the U.S. Geological Survey (USGS), in cooperation with the Federal Emergency Management Agency (FEMA), conducted a study to document the meteorological and hydrological conditions prior to and during the flood; compiled flood-peak gage heights, streamflows, and flood probabilities at USGS streamflow-gaging stations; and estimated streamflows and flood probabilities at selected ungaged locations.

  2. Regional boreal biodiversity peaks at intermediate human disturbance.

    Science.gov (United States)

    Mayor, S J; Cahill, J F; He, F; Sólymos, P; Boutin, S

    2012-01-01

    The worldwide biodiversity crisis has intensified the need to better understand how biodiversity and human disturbance are related. The 'intermediate disturbance hypothesis' suggests that disturbance regimes generate predictable non-linear patterns in species richness. Evidence often contradicts intermediate disturbance hypothesis at small scales, and is generally lacking at large regional scales. Here, we present the largest extent study of human impacts on boreal plant biodiversity to date. Disturbance extent ranged from 0 to 100% disturbed in vascular plant communities, varying from intact forest to agricultural fields, forestry cut blocks and oil sands. We show for the first time that across a broad region species richness peaked in communities with intermediate anthropogenic disturbance, as predicted by intermediate disturbance hypothesis, even when accounting for many environmental covariates. Intermediate disturbance hypothesis was consistently supported across trees, shrubs, forbs and grasses, with temporary and perpetual disturbances. However, only native species fit this pattern; exotic species richness increased linearly with disturbance.

  3. Zero-bias peak in InSb nanowires

    Science.gov (United States)

    Yu, Peng; Chen, Jun; Hocevar, Moïra; Plissard, Sébastien; Car, Diana; Bakkers, Erik; Frolov, Sergey

    2015-03-01

    Zero-bias conductance peaks(ZBP) in InSb nanowires has been reported as a strong signature of Majorana bound states in semiconductors. We made similar superconductor-InSb nanowire-normal contact hybrid devices with NbTiN on bottom gates and found some features that may corresponding to Majorana bound states. By setting a barrier and tuning gates under the nanowire that are in proximity of superconductors, ZBPs appear at finite magnetic field and usually persist for several hundred miliTesla. In different devices, ZBPs appear at different magnetic field, which may result from different chemical potentials. To achieve a so-called hard induced gap and cleaner devices, we are trying various contact materials and etching methods.

  4. Classification of peaked spectrum sources by using neural networks

    Science.gov (United States)

    Vera, R. J. C.; Tornikoski, M.; Lähteenmäki, A.

    2017-07-01

    Compact steep-spectrum sources (CSS), high frequency peakers (HFP), and gigahertz-peaked spectrum sources (GPS) are compact radio sources with an intense emission (O'Dea 1998, and references therein). Morphological studies, dense gas analyses, and surveys suggesting the absence of a halo diffusion emission, suggest the idea that peaked spectrum sources (PSS) are young AGN (see, Fanti et al. 1995; Readhead et al. 1996; Stanghellini et al. 1997; Bicknell et al. 1997). Previously, Torniainen et al. (2008) carried out a study of GPS sources, finding that those sources do not follow a distinct morphological classification. In addition, they found that many blazars in a flaring state are misclassified as GPS sources (Torniainen et al. 2005). These findings compromised the simple vision of the g alaxy-quasar dualism, and the amount of genuine GPS sources. For this reason, we endeavour a new classification of 363 sources with the aim to find new insights about their spectral properties using neural networks. Through clustering methods, we have grouped galaxies that present a set of similar physical properties. In total, 18 physical variables were used for this purpose. In particular, we used Multi-dimensional Scaling (MDS) and t-distributed Stochastic Neighbour Embedding (t-SNE) analyses. Those analyses proved to be robust for analysing data of the order of hundreds of data. From our analyses, we were unable to find a clear classification for PSS. Moreover, new galaxies presented a flat spectra emission, or high variability in the radio emission, compromising their classification as genuine PSS.

  5. Extrasolar Planet Transits Observed at Kitt Peak National Observatory

    Science.gov (United States)

    Sada, Pedro V.; Jennings, Donald E.; Deming, Drake; Jennings, Donald E.; Jackson, Brian; Hamilton, Catrina M.; Fraine, Jonathan; Peterson, Steven W.; Haase, Flynn; Bays, Kevin; Lunsford, Allen; O'Gorman, Eamon

    2012-01-01

    We obtained J-, H-, and JH-band photometry of known extrasolar planet transiting systems at the 2.1 m Kitt Peak National Observatory Telescope using the FLAMINGOS infrared camera between 2008 October and 2011 October. From the derived light curves we have extracted the midtransit times, transit depths and transit durations for these events. The precise midtransit times obtained help improve the orbital periods and also constrain transit-time variations of the systems. For most cases the published system parameters successfully accounted for our observed light curves, but in some instances we derive improved planetary radii and orbital periods. We complemented our 2.1 m infrared observations using CCD z0-band and B-band photometry (plus two H(alpha) filter observations) obtained with the Kitt Peak Visitor Center Telescope, and with four H-band transits observed in 2007 October with the NSO's 1.6 m McMath-Pierce Solar Telescope. The principal highlights of our results are (1) Our ensemble of J-band planetary radii agree with optical radii, with the best-fit relation being RpRJ0:0017 0:979RpRvis. (2) We observe starspot crossings during the transit of WASP-11HAT-P-10. (3) We detect starspot crossings by HAT-P-11b (Kepler-3b), thus confirming that the magnetic evolution of the stellar active regions can be monitored even after the Kepler mission has ended. (4) We confirm a grazing transit for HAT-P-27WASP-40. In total, we present 57 individual transits of 32 known exoplanet systems.

  6. Amorphous chalcogenides as random octahedrally bonded solids: I. Implications for the first sharp diffraction peak, photodarkening, and Boson peak

    Science.gov (United States)

    Lukyanov, Alexey; Lubchenko, Vassiliy

    2017-09-01

    We develop a computationally efficient algorithm for generating high-quality structures for amorphous materials exhibiting distorted octahedral coordination. The computationally costly step of equilibrating the simulated melt is relegated to a much more efficient procedure, viz., generation of a random close-packed structure, which is subsequently used to generate parent structures for octahedrally bonded amorphous solids. The sites of the so-obtained lattice are populated by atoms and vacancies according to the desired stoichiometry while allowing one to control the number of homo-nuclear and hetero-nuclear bonds and, hence, effects of the mixing entropy. The resulting parent structure is geometrically optimized using quantum-chemical force fields; by varying the extent of geometric optimization of the parent structure, one can partially control the degree of octahedrality in local coordination and the strength of secondary bonding. The present methodology is applied to the archetypal chalcogenide alloys AsxSe1-x. We find that local coordination in these alloys interpolates between octahedral and tetrahedral bonding but in a non-obvious way; it exhibits bonding motifs that are not characteristic of either extreme. We consistently recover the first sharp diffraction peak (FSDP) in our structures and argue that the corresponding mid-range order stems from the charge density wave formed by regions housing covalent and weak, secondary interactions. The number of secondary interactions is determined by a delicate interplay between octahedrality and tetrahedrality in the covalent bonding; many of these interactions are homonuclear. The present results are consistent with the experimentally observed dependence of the FSDP on arsenic content, pressure, and temperature and its correlation with photodarkening and the Boson peak. They also suggest that the position of the FSDP can be used to infer the effective particle size relevant for the configurational equilibration in

  7. Application of direct peak analysis to energy dispersive x-ray fluorescence spectra

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, K.K.

    1977-07-01

    A modified Covell method for direct peak analysis has been applied to energy dispersive x-ray fluorescence spectra. The method is background independent and is well-suited to computerized data reduction. It provides acceptable precision, minimizes errors from instrumental gain shift, and permits peak overlap correction. Peak overlap errors exhibit both positive and negative nodes as a function of peak separation distance, and are corrected using concentration ratios determined from thin, single-element standards. Peak precisions and overlaps are evaluated as a function of window width to aid in width selection. Least-square polynomial smoothing prior to peak analysis significantly improves peak area precisions without significantly affecting their accuracies.

  8. Decreased peak expiratory flow in pediatric passive smokers

    Directory of Open Access Journals (Sweden)

    Fitri Yanti

    2011-08-01

    Full Text Available Background Indonesia ranks fifth among countries with the highest aggregate levels of tobacco consumption in the world. Infants and children exposed to environmental tobacco smoke have increased rates of asthma, respiratory and ear infections, as well as reduced lung function. The effects of tobacco smoke exposure on lung function in children have been reported to be dependent on the source of smoke and the length and dose of exposure. Lung function may also be affected by a child’s gender and asthma status. Objective To compare peak expiratory flow (PEF in pediatric passive smokers to that of children not exposed to second hand smoke, and to define factors that may affect PEF in passive smokers. Methods In August 2009 we conducted a cross-sectional study at an elementary school in the Langkat district. Subjects were aged 6 to 12 years, and divided into two groups: passive smokers and those not exposed to secondhand smoke. Subjects’ PEFs were measured with a Mini-Wright peak flow meter. Measurements were performed in triplicate with the highest value recorded as the PEF. Demographic data including age, sex, weight, height, family income, parental education levels and occupations were obtained through questionnaires. Results Of the 170 participants, 100 were passive smokers and 70 were not exposed to secondhand smoke. Age distribution, weight and height were similar in both groups. We observed a significant difference in PEFs between the group of passive smokers and the group not exposed to secondhand smoke, 211.3 L/minute (SD 61.08 and 242.7 L/minute (SD 77.09, respectively (P < 0.005. The number of years of exposure to smoke (P = 0.079 and the number of cigarettes smoked daily in the household (P = 0.098 did not significantly influence PEF. Conclusion The PEF in pediatric passive smokers was significantly lower than that of children not exposed to secondhand smoke. PEF in passive smokers was not influenced by the number of years of smoke

  9. Peak power prediction of a vanadium redox flow battery

    Science.gov (United States)

    Yu, V. K.; Chen, D.

    2014-12-01

    The vanadium redox flow battery (VRFB) is a promising grid-scale energy storage technology, but future widespread commercialization requires a considerable reduction in capital costs. Determining the appropriate battery size for the intended power range can help minimize the amount of materials needed, thereby reducing capital costs. A physics-based model is an essential tool for predicting the power range of large scale VRFB systems to aid in the design optimization process. This paper presents a modeling framework that accounts for the effects of flow rate on the pumping losses, local mass transfer rate, and nonuniform vanadium concentration in the cell. The resulting low-order model captures battery performance accurately even at high power densities and remains computationally practical for stack-level optimization and control purposes. We first use the model to devise an optimal control strategy that maximizes battery life during discharge. Assuming optimal control is implemented, we then determine the upper efficiency limits of a given VRFB system and compare the net power and associated overpotential and pumping losses at different operating points. We also investigate the effects of varying the electrode porosity, stack temperature, and total vanadium concentration on the peak power.

  10. Secondary ozone peaks in the troposphere over the Himalayas

    Science.gov (United States)

    Ojha, Narendra; Pozzer, Andrea; Akritidis, Dimitris; Lelieveld, Jos

    2017-06-01

    Layers with strongly enhanced ozone concentrations in the middle-upper troposphere, referred to as secondary ozone peaks (SOPs), have been observed in different regions of the world. Here we use the global ECHAM5/MESSy atmospheric chemistry model (EMAC) to (i) investigate the processes causing SOPs, (ii) explore both their frequency of occurrence and seasonality, and (iii) assess their effects on the tropospheric ozone budget over the Himalayas. The vertical profiles of potential vorticity (PV) and a stratospheric ozone tracer (O3s) in EMAC simulations, in conjunction with the structure of SOPs, suggest that SOPs over the Himalayas are formed by stratosphere-to-troposphere transport (STT) of ozone. The spatial distribution of O3s further shows that such effects are in general most pronounced in the northern part of India. Model simulated ozone distributions and backward air trajectories show that ozone rich air masses, associated with STT, originate as far as northern Africa and the North Atlantic Ocean, the Middle East, as well as in nearby regions in Afghanistan and Pakistan, and are rapidly (within 2-3 days) transported to the Himalayas. Analysis of a 15-year (2000-2014) EMAC simulation shows that the frequency of SOPs is highest during the pre-monsoon season (e.g. 11 % of the time in May), while no intense SOP events are found during the July-October period. The SOPs are estimated to enhance the tropospheric column ozone (TCO) over the central Himalayas by up to 21 %.

  11. Forecasting the Peak of the Present Solar Activity Cycle

    Science.gov (United States)

    Hamid, Rabab; Marzouk, Beshir

    2016-07-01

    Solar forecasting of the level of sun Activity is very important subject for all space programs. Most predictions are based on the physical conditions prevailing at or before the solar cycle minimum preceding the maximum in question. Our aim is to predict the maximum peak of cycle 24 using precursor techniques in particular those using spotless event, geomagnetic aa min. index and solar flux F10.7. Also prediction of exact date of the maximum (Tr) is taken in consideration. A study of variation over previous spotless event for cycles 7-23 and that for even cycles (8-22) are carried out for the prediction. Linear correlation between RM and spotless event around the preceding minimum gives RM24t = 101.9with rise time Tr = 4.5 Y. For the even cycles RM24e = 108.3 with rise time Tr = 3.9 Y. Based on the average aa min. index for the year of sunspot minimum cycles (13 - 23), we estimate the expected amplitude for cycle 24 to be RMaa = 116.5 for both the total and even cycles. Application of the data of solar flux F10.7 which cover only cycles (19-23) was taken in consideration and gives predicted maximum amplitude R24 10.7 = 146, which are over estimation. Our result indicating a somewhat weaker cycle 24 as compared to cycles 21-23.

  12. Vertical peak ground force in human infant crawling.

    Science.gov (United States)

    Yozu, Arito; Haga, Nobuhiko; Tojima, Michio; Zhang, Yasu; Sumitani, Masahiko; Otake, Yuko

    2013-02-01

    Quadrupedalism is a common mode of locomotion in land animals. The load distribution between the forelimbs (FL) and hindlimbs (HL) in quadrupedalism has been of great interest to researchers, and a database of the vertical peak force (Vpk) for FL and HL has been created for various species. However, Vpk in human infant crawling, a natural form of human quadrupedalism, has not been evaluated. We aimed to study Vpk in human infant crawling. Eight healthy infants who used a typical crawling style (i.e., crawling on the hands and knees) were included. The infants were encouraged to crawl over pressure mats placed on the floor, and Vpk of FL and HL were calculated. FL Vpk was 0.631±0.087 (per BW), and HL Vpk was 0.638±0.089 (per BW). No significant difference was observed between FL and HL Vpk. The mean FL/HL Vpk ratio was -0.011 on a natural logarithmic scale. These data could be added to the current database on Vpk for quadrupedalism.

  13. Distant ionospheric photoelectron energy peak observations at Venus

    Science.gov (United States)

    Coates, A. J.; Wellbrock, A.; Frahm, R. A.; Winningham, J. D.; Fedorov, A.; Barabash, S.; Lundin, R.

    2015-08-01

    The dayside of the Venus ionosphere at the top of the planet's thick atmosphere is sustained by photoionization. The consequent photoelectrons may be identified by specific peaks in the energy spectrum at 20-30 eV which are mainly due to atomic oxygen photoionization. The ASPERA-4 electron spectrometer has an energy resolution designed to identify the photoelectron production features. Photoelectrons are seen not only in their production region, the sunlit ionosphere, but also at more distant locations on the nightside of the Venus environment. Here, we present a summary of the work to date on observations of photoelectrons at Venus, and their comparison with similar processes at Titan and Mars. We expand further by presenting new examples of the distant photoelectrons measured at Venus in the dark tail and further away from Venus than seen before. The photoelectron and simultaneous ion data are then used to determine the ion escape rate from Venus for one of these intervals. We compare the observed escape rates with other rates measured at Venus, and at other planets, moons and comets. We find that the escape rates are grouped by object type when plotted against body radius.

  14. Fast-slow climate dynamics and peak global warming

    Science.gov (United States)

    Seshadri, Ashwin K.

    2016-06-01

    The dynamics of a linear two-box energy balance climate model is analyzed as a fast-slow system, where the atmosphere, land, and near-surface ocean taken together respond within few years to external forcing whereas the deep-ocean responds much more slowly. Solutions to this system are approximated by estimating the system's time-constants using a first-order expansion of the system's eigenvalue problem in a perturbation parameter, which is the ratio of heat capacities of upper and lower boxes. The solution naturally admits an interpretation in terms of a fast response that depends approximately on radiative forcing and a slow response depending on integrals of radiative forcing with respect to time. The slow response is inversely proportional to the "damping-timescale", the timescale with which deep-ocean warming influences global warming. Applications of approximate solutions are discussed: conditions for a warming peak, effects of an individual pulse emission of carbon dioxide (CO2 ), and metrics for estimating and comparing contributions of different climate forcers to maximum global warming.

  15. Textural Poaching Twin Peaks: The Audrey Horne Sweater Girl GIFs

    Directory of Open Access Journals (Sweden)

    Jennifer Gillan

    2016-12-01

    Full Text Available This article aims to widen the lens of analysis of participatory culture inspired by long-arc serials like Twin Peaks. It considers GIF creation as a form of textural poaching, a new reception practice involving skimming off and repurposing top-of-the-mind content: the most arresting elements of costuming, set design, and dialogue. This behavior has become more popular as more series rely on textural storytelling and are filled with moments of excess that feel separate from the story. After an introduction to GIFs and GIF creation, it contrasts the impression of the character and series conveyed by Audrey Horne GIFs and the actual dynamics in the “Audrey’s Dance” scene. It establishes that Audrey’s look is most visually aligned with the Sweater Girl type, but as an allusive characterization it creates excess and calls attention to itself. Part of the “cool pop” reputation of the series may stem from the wider circulation of iconic moments of excess especially given that the GIFs detach the images from the series’ uneven storytelling and its challenging surrealist sensibility.

  16. Estrogen elevates the peak overnight production rate of acylated ghrelin.

    Science.gov (United States)

    Paulo, Remberto C; Brundage, Richard; Cosma, Mihaela; Mielke, Kristi L; Bowers, Cyril Y; Veldhuis, Johannes D

    2008-11-01

    Acylated ghrelin is the putatively bioactive GH secretagogue. Estradiol (E2) stimulates the synthesis rather than inhibits the metabolic clearance of acylated ghrelin. The study took place at an academic medical center. Healthy postmenopausal women participated. Interventions included prospectively randomized, double-blind separate-day iv infusions of saline or five graded doses of ghrelin in estrogen-deficient (n=12) and E2-supplemented (n=8) women. Metabolic clearance rate (MCR), volume of distribution, half-life, and secretion rate of acylated ghrelin were assessed. In pilot iv bolus ghrelin infusions, the median half-lives of acylated and total ghrelin were 21 and 36 min (Prate (638+/-12 slope units), 2) MCR of acylated ghrelin and ghrelin infusion rate (10+/-2.5 slope units), and 3) MCR and plasma concentration of acylated ghrelin (0.017+/-0.004 slope units). These data predict peak nighttime production rates of acylated ghrelin of 3.8+/-0.9 (E2) and 1.9+/-0.2 (no E2) ng/kg.min (P=0.039). Acylated ghrelin has a multifold larger distribution volume and MCR than total ghrelin. An estrogenic milieu augments synthesis and/or acylation of ghrelin peptide without altering its MCR.

  17. Implications of ``peak oil'' for atmospheric CO2 and climate

    Science.gov (United States)

    Kharecha, Pushker A.; Hansen, James E.

    2008-09-01

    Unconstrained CO2 emission from fossil fuel burning has been the dominant cause of observed anthropogenic global warming. The amounts of "proven" and potential fossil fuel reserves are uncertain and debated. Regardless of the true values, society has flexibility in the degree to which it chooses to exploit these reserves, especially unconventional fossil fuels and those located in extreme or pristine environments. If conventional oil production peaks within the next few decades, it may have a large effect on future atmospheric CO2 and climate change, depending upon subsequent energy choices. Assuming that proven oil and gas reserves do not greatly exceed estimates of the Energy Information Administration, and recent trends are toward lower estimates, we show that it is feasible to keep atmospheric CO2 from exceeding about 450 ppm by 2100, provided that emissions from coal, unconventional fossil fuels, and land use are constrained. Coal-fired power plants without sequestration must be phased out before midcentury to achieve this CO2 limit. It is also important to "stretch" conventional oil reserves via energy conservation and efficiency, thus averting strong pressures to extract liquid fuels from coal or unconventional fossil fuels while clean technologies are being developed for the era "beyond fossil fuels". We argue that a rising price on carbon emissions is needed to discourage conversion of the vast fossil resources into usable reserves, and to keep CO2 beneath the 450 ppm ceiling.

  18. Error Thresholds in Single-Peak Gaussian Distributed Fitness Landscapes

    Science.gov (United States)

    Feng, Xiao-Li; Gu, Jian-Zhong; Li, Yu-Xiao; Zhuo, Yi-Zhong

    2007-10-01

    Based on the Eigen and Crow-Kimura models with a single-peak fitness landscape, we propose the fitness values of all sequence types to be Gaussian distributed random variables to incorporate the effects of the fluctuations of the fitness landscapes (noise of environments) and investigate the concentration distribution and error threshold of quasispecies by performing an ensemble average within this theoretical framework. We find that a small fluctuation of the fitness landscape causes only a slight change in the concentration distribution and error threshold, which implies that the error threshold is stable against small perturbations. However, for a sizable fluctuation, quite different from the previous deterministic models, our statistical results show that the transition from quasi-species to error catastrophe is not so sharp, indicating that the error threshold is located within a certain range and has a shift toward a larger value. Our results are qualitatively in agreement with the experimental data and provide a new implication for antiviral strategies.

  19. Residential implementation of critical-peak pricing ofelectricity

    Energy Technology Data Exchange (ETDEWEB)

    Herter, Karen

    2006-06-29

    This paper investigates how critical-peak pricing (CPP)affects households with different usage and income levels, with the goalof informing policy makers who are considering the implementation of CPPtariffs in the residential sector. Using a subset of data from theCalifornia Statewide Pricing Pilot of 2003-2004, average load changeduring summer events, annual percent bill change, and post-experimentsatisfaction ratings are calculated across six customer segments,categorized by historical usage and income levels. Findings show thathigh-use customers respond significantly more in kW reduction than dolow-use customers, while low-use customers save significantly more inpercentage reduction of annual electricity bills than do high-usecustomers results that challenge the strategy of targeting only high-usecustomers for CPP tariffs. Across income levels, average load and billchanges were statistically indistinguishable, as were satisfaction ratesresults that are compatible with a strategy of full-scale implementationof CPP rates in the residential sector. Finally, the high-use customersearning less than $50,000 annually were the most likely of the groups tosee bill increases about 5 percent saw bill increases of 10 percent ormore suggesting that any residential CPP implementation might considertargeting this customer group for increased energy efficiencyefforts.

  20. Regression based peak load forecasting using a transformation technique

    Energy Technology Data Exchange (ETDEWEB)

    Haida, Takeshi; Muto, Shoichi (Tokyo Electric Power Co. (Japan). Computer and Communication Research Center)

    1994-11-01

    This paper presents a regression based daily peak load forecasting method with a transformation technique. In order to forecast the load precisely through a year, the authors should consider seasonal load change, annual load growth and the latest daily load change. To deal with these characteristics in the load forecasting, a transformation technique is presented. This technique consists of a transformation function with translation and reflection methods. The transformation function is estimated with the previous year's data points, in order that the function converts the data points into a set of new data points with preserving the shape of temperature-load relationships in the previous year. Then, the function is slightly translated so that the transformed data points will fit the shape of temperature-load relationships in the year. Finally, multivariate regression analysis with the latest daily loads and weather observations estimates the forecasting model. Large forecasting errors caused by the weather-load nonlinear characteristic in the transitional seasons such as spring and fall are reduced. Performance of the technique which is verified with simulations on actual load data of Tokyo Electric Power Company is also described.

  1. Relation between cardiac dimensions and peak oxygen uptake

    Directory of Open Access Journals (Sweden)

    Mosén H

    2010-02-01

    Full Text Available Abstract Background Long term endurance training is known to increase peak oxygen uptake ( and induce morphological changes of the heart such as increased left ventricular mass (LVM. However, the relationship between and the total heart volume (THV, considering both the left and right ventricular dimensions in both males and females, is not completely described. Therefore, the aim of this study was to test the hypothesis that THV is an independent predictor of and to determine if the left and right ventricles enlarge in the same order of magnitude in males and females with a presumed wide range of THV. Methods and Results The study population consisted of 131 subjects of whom 71 were athletes (30 female and 60 healthy controls (20 female. All subjects underwent cardiovascular MR and maximal incremental exercise test. Total heart volume, LVM and left- and right ventricular end-diastolic volumes (LVEDV, RVEDV were calculated from short-axis images. was significantly correlated to THV, LVM, LVEDV and RVEDV in both males and females. Multivariable analysis showed that THV was a strong, independent predictor of (R2 = 0.74, p 2 = 0.87, p Conclusion Total heart volume is a strong, independent predictor of maximal work capacity for both males and females. Long term endurance training is associated with a physiologically enlarged heart with a balance between the left and right ventricular dimensions in both genders.

  2. Masked areas in shear peak statistics. A forward modeling approach

    Energy Technology Data Exchange (ETDEWEB)

    Bard, D.; Kratochvil, J. M.; Dawson, W.

    2016-03-09

    The statistics of shear peaks have been shown to provide valuable cosmological information beyond the power spectrum, and will be an important constraint of models of cosmology in forthcoming astronomical surveys. Surveys include masked areas due to bright stars, bad pixels etc., which must be accounted for in producing constraints on cosmology from shear maps. We advocate a forward-modeling approach, where the impacts of masking and other survey artifacts are accounted for in the theoretical prediction of cosmological parameters, rather than correcting survey data to remove them. We use masks based on the Deep Lens Survey, and explore the impact of up to 37% of the survey area being masked on LSST and DES-scale surveys. By reconstructing maps of aperture mass the masking effect is smoothed out, resulting in up to 14% smaller statistical uncertainties compared to simply reducing the survey area by the masked area. We show that, even in the presence of large survey masks, the bias in cosmological parameter estimation produced in the forward-modeling process is ≈1%, dominated by bias caused by limited simulation volume. We also explore how this potential bias scales with survey area and evaluate how much small survey areas are impacted by the differences in cosmological structure in the data and simulated volumes, due to cosmic variance.

  3. Fast-slow climate dynamics and peak global warming

    Science.gov (United States)

    Seshadri, Ashwin K.

    2017-04-01

    The dynamics of a linear two-box energy balance climate model is analyzed as a fast-slow system, where the atmosphere, land, and near-surface ocean taken together respond within few years to external forcing whereas the deep-ocean responds much more slowly. Solutions to this system are approximated by estimating the system's time-constants using a first-order expansion of the system's eigenvalue problem in a perturbation parameter, which is the ratio of heat capacities of upper and lower boxes. The solution naturally admits an interpretation in terms of a fast response that depends approximately on radiative forcing and a slow response depending on integrals of radiative forcing with respect to time. The slow response is inversely proportional to the "damping-timescale", the timescale with which deep-ocean warming influences global warming. Applications of approximate solutions are discussed: conditions for a warming peak, effects of an individual pulse emission of carbon dioxide (CO2), and metrics for estimating and comparing contributions of different climate forcers to maximum global warming.

  4. Impact of the definition of peak standardized uptake value on quantification of treatment response.

    Science.gov (United States)

    Vanderhoek, Matt; Perlman, Scott B; Jeraj, Robert

    2012-01-01

    PET-based treatment response assessment typically measures the change in maximum standardized uptake value (SUV(max)), which is adversely affected by noise. Peak SUV (SUV(peak)) has been recommended as a more robust alternative, but its associated region of interest (ROI(peak)) is not uniquely defined. We investigated the impact of different ROI(peak) definitions on quantification of SUV(peak) and tumor response. Seventeen patients with solid malignancies were treated with a multitargeted receptor tyrosine kinase inhibitor resulting in a variety of responses. Using the cellular proliferation marker 3'-deoxy-3'-(18)F-fluorothymidine ((18)F-FLT), whole-body PET/CT scans were acquired at baseline and during treatment. (18)F-FLT-avid lesions (∼2/patient) were segmented on PET images, and tumor response was assessed via the relative change in SUV(peak). For each tumor, 24 different SUV(peaks) were determined by changing ROI(peak) shape (circles vs. spheres), size (7.5-20 mm), and location (centered on SUV(max) vs. placed in highest-uptake region), encompassing different definitions from the literature. Within each tumor, variations in the 24 SUV(peaks) and tumor responses were measured using coefficient of variation (CV), standardized deviation (SD), and range. For each ROI(peak) definition, a population average SUV(peak) and tumor response were determined over all tumors. A substantial variation in both SUV(peak) and tumor response resulted from changing the ROI(peak) definition. The variable ROI(peak) definition led to an intratumor SUV(peak) variation ranging from 49% above to 46% below the mean (CV, 17%) and an intratumor SUV(peak) response variation ranging from 49% above to 35% below the mean (SD, 9%). The variable ROI(peak) definition led to a population average SUV(peak) variation ranging from 24% above to 28% below the mean (CV, 14%) and a population average SUV(peak) response variation ranging from only 3% above to 3% below the mean (SD, 2%). The size of ROI(peak

  5. Peak Ground Velocities for Seismic Events at Yucca Mountain, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    K. Coppersmith; R. Quittmeyer

    2005-02-16

    This report describes a scientific analysis to bound credible horizontal peak ground velocities (PGV) for the repository waste emplacement level at Yucca Mountain. Results are presented as a probability distribution for horizontal PGV to represent uncertainties in the analysis. The analysis also combines the bound to horizontal PGV with results of ground motion site-response modeling (BSC 2004 [DIRS 170027]) to develop a composite hazard curve for horizontal PGV at the waste emplacement level. This result provides input to an abstraction of seismic consequences (BSC 2004 [DIRS 169183]). The seismic consequence abstraction, in turn, defines the input data and computational algorithms for the seismic scenario class of the total system performance assessment (TSPA). Planning for the analysis is documented in Technical Work Plan TWP-MGR-GS-000001 (BSC 2004 [DIRS 171850]). The bound on horizontal PGV at the repository waste emplacement level developed in this analysis complements ground motions developed on the basis of PSHA results. In the PSHA, ground motion experts characterized the epistemic uncertainty and aleatory variability in their ground motion interpretations. To characterize the aleatory variability they used unbounded lognormal distributions. As a consequence of these characterizations, as seismic hazard calculations are extended to lower and lower annual frequencies of being exceeded, the ground motion level increases without bound, eventually reaching levels that are not credible (Corradini 2003 [DIRS 171191]). To provide credible seismic inputs for TSPA, in accordance with 10 Code of Federal Regulations (CFR) 63.102(j) [DIRS 156605], this complementary analysis is carried out to determine reasonable bounding values of horizontal PGV at the waste emplacement level for annual frequencies of exceedance as low as 10{sup -8}. For each realization of the TSPA seismic scenario, the results of this analysis provide a constraint on the values sampled from the

  6. Variable Depth Bragg Peak Method for Single Event Effects Testing

    Science.gov (United States)

    Buchner, S.; Kanyogoro, N.; Foster, C.; O'Neill, P.

    2011-01-01

    Traditionally, accelerator SEE testing is accomplished by removing the tops of packages so that the IC chips are accessible to heavy ions. However, ICs in some advanced packages cannot be de-lidded so a different approach is used that involves grinding and/or chemically etching away part of the package and the chip from the back side. The parts are then tested from the back side with ions having sufficient range to reach the sensitive volume. More recently, the entire silicon substrate in an SOI/SRAM was removed, making it possible to use low-energy ions with shorter ranges. Where removal of part of the package is not possible, facilities at Michigan State, NASA Space Radiation Laboratory, GANIL (France) and GSI (Germany) offer high-energy heavy ions with long ranges so that the ions can reach the devices' sensitive volumes without much change in the LET. Unfortunately, a run will typically involve only one ion species having a single energy and LET due to the long time it takes to tune a new energy. The Variable Depth Bragg Peak (VDBP) method is similar to the above method in that it involves the use of high-energy heavy ions that are able to pass through the packaging material and reach the device, obviating the need to remove the package. However, the method provides a broad range of LETs from a single ion by inserting degraders in the beam that modify the ion energy and, therefore, the LET. The crux of the method involves establishing a fiduciary point for degrader thickness, i.e., where the Bragg peak is located precisely at the sensitive volume in the device, for which the measured SEU cross-section and the ion LET are both also maxima and can be calculated using a Monte-Carlo program, TRIM. Once the fiduciary point has been established, calibrated high density polyethylene (HDPE) degraders are inserted into or removed from the beam to vary the ion LET at the device in a known manner. After each change of degrader thickness, the SEU cross-section is measured

  7. Hubbert's Peak, The Coal Question, and Climate Change

    Science.gov (United States)

    Rutledge, D.

    2008-12-01

    The United Nations Intergovernmental Panel on Climate Change (IPCC) makes projections in terms of scenarios that include estimates of oil, gas, and coal production. These scenarios are defined in the Special Report on Emissions Scenarios or SRES (Nakicenovic et al., 2000). It is striking how different these scenarios are. For example, total oil production from 2005 to 2100 in the scenarios varies by 5:1 (Appendix SRES Version 1.1). Because production in some of the scenarios has not peaked by 2100, this ratio would be comparable to 10:1 if the years after 2100 were considered. The IPCC says "... the resultant 40 SRES scenarios together encompass the current range of uncertainties of future GHG [greenhouse gas] emissions arising from different characteristics of these models ..." (Nakicenovic et al., 2000, Summary for Policy Makers). This uncertainty is important for climate modeling, because it is larger than the likely range for the temperature sensitivity, which the IPCC gives as 2.3:1 (Gerard Meehl et al., 2007, the Fourth Assessment Report, Chapter 10, Global Climate Projections, p. 799). The uncertainty indicates that we could improve climate modeling if we could make a better estimate of future oil, gas, and coal production. We start by considering the two major fossil-fuel regions with substantial exhaustion, US oil and British coal. It turns out that simple normal and logistic curve fits to the cumulative production for these regions give quite stable projections for the ultimate production. By ultimate production, we mean total production, past and future. For US oil, the range for the fits for the ultimate is 1.15:1 (225- 258 billion barrels) for the period starting in 1956, when King Hubbert made his prediction of the peak year of US oil production. For UK coal, the range is 1.26:1 for the period starting in 1905, at the time of a Royal Commission on coal supplies. We extend this approach to find fits for world oil and gas production, and by a regional

  8. Nuclear Hydrogen for Peak Electricity Production and Spinning Reserve

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W.

    2005-01-20

    Nuclear energy can be used to produce hydrogen. The key strategic question is this: ''What are the early markets for nuclear hydrogen?'' The answer determines (1) whether there are incentives to implement nuclear hydrogen technology today or whether the development of such a technology could be delayed by decades until a hydrogen economy has evolved, (2) the industrial partners required to develop such a technology, and (3) the technological requirements for the hydrogen production system (rate of production, steady-state or variable production, hydrogen purity, etc.). Understanding ''early'' markets for any new product is difficult because the customer may not even recognize that the product could exist. This study is an initial examination of how nuclear hydrogen could be used in two interconnected early markets: the production of electricity for peak and intermediate electrical loads and spinning reserve for the electrical grid. The study is intended to provide an initial description that can then be used to consult with potential customers (utilities, the Electric Power Research Institute, etc.) to better determine the potential real-world viability of this early market for nuclear hydrogen and provide the starting point for a more definitive assessment of the concept. If this set of applications is economically viable, it offers several unique advantages: (1) the market is approximately equivalent in size to the existing nuclear electric enterprise in the United States, (2) the entire market is within the utility industry and does not require development of an external market for hydrogen or a significant hydrogen infrastructure beyond the utility site, (3) the technology and scale match those of nuclear hydrogen production, (4) the market exists today, and (5) the market is sufficient in size to justify development of nuclear hydrogen production techniques independent of the development of any other market for hydrogen

  9. Methods for reducing peak pressure in laparoscopic grasping.

    Science.gov (United States)

    Bos, Jasper; Doornebosch, Ernst W L J; Engbers, Josco G; Nyhuis, Ole; Dodou, Dimitra

    2013-12-01

    During tissue retraction with a laparoscopic grasper, tissue-damaging pressures can occur. Past research suggests that peak pressures can be considerably reduced by rounding the edges or covering the tip of the end effector with a silicon sleeve. To identify grasping methods that limit tissue damage, the effects of (a) Young's modulus of the end effector, (b) curvature of the end effector, and (c) angle with which the tissue is pulled relative to the plane of the end effector, on the pressure generated on the tissue were investigated. Artificial skin was placed between two non-serrated jaws, a pressure-sensitive film was interposed between the skin and upper jaw, and the end effector was loaded with 13 N. End effectors with Young's moduli of 0.09, 0.67, 1.49 MPa, and 69 GPa, and with non-rounded and 5 mm rounded edges were tested under pulling angles of 25°, 50°, and 75°. For non-rounded end effectors, the maximum pressure and the area across which pressure exceeded the safety threshold for tissue damage increased with Young's modulus and pulling angle. For rounded end effectors, maximum pressure did not increase monotonically with Young's modulus. Instead, the end effector with the second lowest Young's modulus yielded significantly lower maximum pressure than the end effector with the lowest Young's modulus. For rounded end effectors, pressures were below the safety threshold for all Young's moduli. This indicates that to prevent tissue damage, soft graspers may not be needed; rounding the edges of metal graspers could suffice for preventing tissue damage.

  10. Modeling Circumgalactic Gas During the Peak Epoch of Galaxy Growth

    Science.gov (United States)

    Dave, Romeel

    During the peak of cosmic star formation at z=1-4, galaxy growth is increasingly believed to be modulated by large-scale inflows and outflows of baryons that intimately connect galaxies to their surrounding circumgalactic medium (CGM). Unfortunately, direct observational signatures of these baryon cycling processes are elusive and fragmented, owing to the diffuse and multi- phase nature of the CGM. This proposal aims to use advanced multi-scale cosmological hydrodynamic simulations to investigate how inflows and outflows within circumgalactic gas are manifested in present and future observables, and how those observables in turn constrain the physical processes driving galaxy evolution. The simulation methodology includes ``random" cosmological runs, ``zoom" runs of individual halos, and radiative transfer to better model the ionization conditions. We will focus on absorption and emission signatures in HI and metal lines using common rest-UV and rest-optical tracers. Key questions include: How do metal absorbers trace the enrichment and ionization conditions within circumgalactic gas? How much absorption arises from inflow versus outflow, and what are the characteristic absorption, emission, and/or kinematic signatures of each? What emission lines from CGM gas are predicted to be observable, and how does the combination of emission and absorption constrain CGM properties? What are the roles of metallicity, ionization, and large-scale structure in establishing the correlations of metal absorbers and galaxies on CGM scales? How do all these CGM properties relate to host galaxy properties such as mass, and how do they vary with outflow model? The overall goal is to develop a comprehensive hierarchical-based framework for assembling various observations of circumgalactic gas into a unified scenario for how inflows and outflows govern the growth of galaxies.

  11. Implications of 'Peak Oil' for Atmospheric CO2 and Climate

    Science.gov (United States)

    Kharecha, P. A.; Hansen, J. E.

    2008-12-01

    Unconstrained CO2 emission from fossil fuel burning has been the dominant cause of observed anthropogenic global warming. The amounts of "proven" and potential fossil fuel reserves are uncertain and debated. Regardless of the true values, society has flexibility in the degree to which it chooses to exploit these reserves, especially unconventional fossil fuels and those located in extreme or pristine environments. If conventional oil production peaks within the next few decades, it may have a large effect on future atmospheric CO2 and climate change, depending upon subsequent energy choices. Assuming that proven oil and gas reserves do not greatly exceed estimates of the Energy Information Administration -- and recent trends are toward lower estimates -- we show that it is feasible to keep atmospheric CO2 from exceeding about 450 ppm by 2100, provided that emissions from coal, unconventional fossil fuels, and land use are constrained. Coal-fired facilities without sequestration must be phased out before midcentury to achieve this CO2 limit. It is also important to "stretch" conventional oil reserves via energy conservation and efficiency, thus averting strong pressures to extract liquid fuels from coal or unconventional fossil fuels while clean technologies are being developed for the era "beyond fossil fuels". We argue that a rising price on carbon emissions is needed to discourage conversion of the vast fossil resources into usable reserves, and to keep CO2 below 450 ppm. It is also plausible that CO2 can be returned below 350 ppm by 2100 or sooner, if more aggressive mitigation measures are enacted, most notably a phase-out of global coal emissions by circa 2030 and large- scale reforestation, primarily in the tropics but also in temperate regions.

  12. The Southern Kurile Islands: Shrouded in Eternal Fog

    Science.gov (United States)

    2012-03-22

    unrealistic due to being overly complicated and prone to be very time consuming. Markku Heiskanen draws insights from the Åland resolution for autonomy...2012). 143 An assessment in 2007 was that the islands had lost their former military significance. See Markku Heiskanen , “Solving the Territorial...Kurillian Knot, ed. Kimie Hara and Geoffrey Jukes (New York, NY: Routledge, 2009), 118. 240 Heiskanen , “Solving the Territorial Dispute Between Japan and

  13. (reprocessed)CAGE_peaks_annotation - FANTOM5 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us FANTOM5 (reprocessed)CAGE_peaks_annotation Data detail Data name (reprocessed)CAGE_peaks_ann... - - Description of data contents Annotation of human and mouse CAGE peaks and RNA transcriptional initiatio...rence sequences (hg38/mm10). Data file File name: (reprocessed)CAGE_peaks_annotation (Homo sapiens) File URL...: ftp://ftp.biosciencedbc.jp/archive/fantom5/datafiles/reprocessed/hg38_latest/extra/CAGE_peaks_annotation/ ...File size: 16 MB File name: (reprocessed)CAGE_peaks_annotation (Mus musculus) Fil

  14. Back-Up/ Peak Shaving Fuel Cell System

    Energy Technology Data Exchange (ETDEWEB)

    Staudt, Rhonda L.

    2008-05-28

    This Final Report covers the work executed by Plug Power from 8/11/03 – 10/31/07 statement of work for Topic 2: advancing the state of the art of fuel cell technology with the development of a new generation of commercially viable, stationary, Back-up/Peak-Shaving fuel cell systems, the GenCore II. The Program cost was $7.2 M with the Department of Energy share being $3.6M and Plug Power’s share being $3.6 M. The Program started in August of 2003 and was scheduled to end in January of 2006. The actual program end date was October of 2007. A no cost extension was grated. The Department of Energy barriers addressed as part of this program are: Technical Barriers for Distributed Generation Systems: o Durability o Power Electronics o Start up time Technical Barriers for Fuel Cell Components: o Stack Material and Manufacturing Cost o Durability o Thermal and water management Background The next generation GenCore backup fuel cell system to be designed, developed and tested by Plug Power under the program is the first, mass-manufacturable design implementation of Plug Power’s GenCore architected platform targeted for battery and small generator replacement applications in the telecommunications, broadband and UPS markets. The next generation GenCore will be a standalone, H2 in-DC-out system. In designing the next generation GenCore specifically for the telecommunications market, Plug Power is teaming with BellSouth Telecommunications, Inc., a leading industry end user. The final next generation GenCore system is expected to represent a market-entry, mass-manufacturable and economically viable design. The technology will incorporate: • A cost-reduced, polymer electrolyte membrane (PEM) fuel cell stack tailored to hydrogen fuel use • An advanced electrical energy storage system • A modular, scalable power conditioning system tailored to market requirements • A scaled-down, cost-reduced balance of plant (BOP) • Network Equipment Building Standards (NEBS), UL

  15. Experiences of Vulnerable Residential Customer Subpopulations with Critical Peak Pricing

    Energy Technology Data Exchange (ETDEWEB)

    Cappers, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Spurlock, C. Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Todd, Annika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jin, Ling [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-13

    DOE decided to co-fund ten utilities to undertake eleven experimentally-designed Consumer Behavior Studies (CBS) that proposed to examine a wide range of the topics of interest to the electric utility industry. Each chosen utility was to design, implement and evaluate their own study in order to address questions of interest both to itself and to its applicable regulatory authority, whose approval was generally necessary for the study to proceed. The DOE Office of Energy Delivery and Electricity Reliability (OE), however, did set guidelines, both in the FOA and subsequently during the contracting period, for what would constitute an acceptable study under the Grant. To assist in ensuring these guidelines were adhered to, OE requested that LBNL act as project manager for these Consumer Behavior Studies to achieve consistency of experimental design and adherence to data collection and reporting protocols across the ten utilities. As part of its role, LBNL formed technical advisory groups (TAG) to separately assist each of the utilities by providing technical assistance in all aspects of the design, implementation and evaluation of their studies. LBNL was also given a unique opportunity to perform a comprehensive, cross-study analysis that uses the customer-level interval meter and demographic data made available by these utilities due to SGIG-imposed reporting requirements, in order to analyze critical policy issues associated with AMI-enabled rates and control/information technology. LBNL will publish the results of these analyses in a series of research reports, of which this is one, that attempt to address critical policy issues relating to a variety of topics including customer acceptance, retention and load response to time-based rates and various forms of enabling control and information technologies. This report extends the existing empirical literature on the experiences of low-income customers exposed to critical peak pricing, and provides the first glimpses

  16. Seafloor characterisation using echo peak amplitudes of multibeam hydrosweep system - A preliminary study at Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, B.; Sudhakar, T.

    In this paper an interface to acquire 59-beams echo peak amplitudes of the Hydrosweep Multibeam system is established. The echo peak amplitude values collected at varying seabed provinces of Arabian sea are presented. The study reveals...

  17. The shape of CMB temperature and polarization peaks on the sphere

    CERN Document Server

    Marcos-Caballero, A; Martínez-González, E; Vielva, P

    2015-01-01

    We present a theoretical study of CMB peaks including polarization and allowing nonzero eccentricity. The formalism is developed in harmonic space and using the covariant derivative on the sphere, which guarantees that the expressions obtained are completely valid at large scales (i.e., no flat approximation). The expected patterns induced by the peak, either in temperature or polarization, are calculated, as well as their covariances. It is found that the eccentricity introduces a quadrupolar dependence in the peak shape, which is proportional to a complex bias parameter $b_\\epsilon$, characterizing the peak asymmetry and orientation. In addition, the one-point statistics of the variables defining the peak on the sphere is reviewed, finding some differences with respect to the flat case for large peaks. Finally, we present a mechanism to simulate constrained CMB maps with a particular peak on the field, which is an interesting tool for analysing the statistical properties of the peaks present in the data.

  18. A method of searching for peaks and multiplets in {gamma}-ray spectra

    Energy Technology Data Exchange (ETDEWEB)

    Loska, L.; Janczyszyn, J. [Akademia Gorniczo-Hutnicza, Cracow (Poland). Inst. Wiertniczo-Naftowy

    1997-01-01

    A new method of searching peaks in gamma spectra is proposed. The method makes use of the well known Sterlinski`s algorithm. The number proportional to peak area and the variance of this number (from the Sterlinski`s method) are used in the criterion selecting ``true`` peaks. A comparison of performance in searching single and multiple peaks of the proposed method and others frequently used in practice shows a better quality of our method. (Author).

  19. On the Robustness of the Twin-Peaked Ergodic Distribution of Income Across Countries

    OpenAIRE

    Gisele Hites

    2000-01-01

    In the literature on convergence, the simple Markov chain model indicates evolution towards a twin-peaked world. Although cleansing the ergodic distribution of income across countries of short-run noise reinforces its twin-peaked shape, these twin peaks are not statistically significant. Moreover, the specific type high immobility reflected by the data on income renders the estimated transition matrix particularly prone to the generation of twin-peaked ergodic distributions.

  20. Peak data for U.S. Geological Survey gaging stations, Texas network and computer program to estimate peak-streamflow frequency

    Science.gov (United States)

    Slade, R.M.; Asquith, W.H.

    1996-01-01

    About 23,000 annual peak streamflows and about 400 historical peak streamflows exist for about 950 stations in the surface-water data-collection network of Texas. These data are presented on a computer diskette along with the corresponding dates, gage heights, and information concerning the basin, and nature or cause for the flood. Also on the computer diskette is a U.S. Geological Survey computer program that estimates peak-streamflow frequency based on annual and historical peak streamflow. The program estimates peak streamflow for 2-, 5-, 10-, 25-, 50-, and 100-year recurrence intervals and is based on guidelines established by the Interagency Advisory Committee on Water Data. Explanations are presented for installing the program, and an example is presented with discussion of its options.

  1. Mountain substitutability and peak load pricing of high alpine peaks as a management tool to reduce environmental damage: a contingent valuation study.

    Science.gov (United States)

    Loomis, John B; Keske, Catherine M

    2009-04-01

    High alpine peaks throughout the world are under increasing environmental pressure from hikers, trekkers, and climbers. Colorado's "Fourteeners", peaks with summits above 14,000 feet are no exception. Most of these peaks have no entrance fees, and reach ecological and social carrying capacity on weekends. This paper illustrates how a series of dichotomous choice contingent valuation questions can be used to evaluate substitutability between different alpine peaks and quantify the price responsiveness to an entrance fee. Using this approach, we find that peak load pricing would decrease use of popular Fourteeners in Colorado by 22%. This reduction is due almost entirely to substitution, rather than income effects. There is also price inelastic demand, as 60% of the hikers find no substitution for their specific Fourteener at the varying cost increases posed in the survey. The no substitute group has a mean net benefit of $294 per hiker, per trip, considerably higher than visitor net benefits in most recreational use studies.

  2. Peak groundwater depletion in the High Plains Aquifer, projections from 1930 to 2110

    Science.gov (United States)

    Peak groundwater depletion from overtapping aquifers beyond recharge rates occurs as the depletion rate increases until a peak occurs followed by a decreasing trend as pumping equilibrates towards available recharge. The logistic equation of Hubbert’s study of peak oil is used to project measurement...

  3. Spin-slip structure and central peak phenomena in singlet-doublet system: Praseodymium

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker

    1997-01-01

    A theory is given for the central peaks observed in praseodymium, which is an effective singlet-doublet System of localized spins. The dominant peak is due to induced longitudinal magnetic ordering, which can be accounted for by mode-mode coupling theory. The second, broader peak is due to an ind...

  4. 78 FR 45495 - Conejos Peak Ranger District, Rio Grande National Forest; Colorado; Cumbres Vegetation Management...

    Science.gov (United States)

    2013-07-29

    ... Forest Service Conejos Peak Ranger District, Rio Grande National Forest; Colorado; Cumbres Vegetation... statement. SUMMARY: The Conejos Peak Ranger District, Rio Grande National Forest, proposes to salvage timber... comments-rockv-mountain-rio-qrande-conejos-peak@fs.fed.us , or via facsimile to 719-852-6250, with subject...

  5. A simple multi-scale Gaussian smoothing-based strategy for automatic chromatographic peak extraction.

    Science.gov (United States)

    Fu, Hai-Yan; Guo, Jun-Wei; Yu, Yong-Jie; Li, He-Dong; Cui, Hua-Peng; Liu, Ping-Ping; Wang, Bing; Wang, Sheng; Lu, Peng

    2016-06-24

    Peak detection is a critical step in chromatographic data analysis. In the present work, we developed a multi-scale Gaussian smoothing-based strategy for accurate peak extraction. The strategy consisted of three stages: background drift correction, peak detection, and peak filtration. Background drift correction was implemented using a moving window strategy. The new peak detection method is a variant of the system used by the well-known MassSpecWavelet, i.e., chromatographic peaks are found at local maximum values under various smoothing window scales. Therefore, peaks can be detected through the ridge lines of maximum values under these window scales, and signals that are monotonously increased/decreased around the peak position could be treated as part of the peak. Instrumental noise was estimated after peak elimination, and a peak filtration strategy was performed to remove peaks with signal-to-noise ratios smaller than 3. The performance of our method was evaluated using two complex datasets. These datasets include essential oil samples for quality control obtained from gas chromatography and tobacco plant samples for metabolic profiling analysis obtained from gas chromatography coupled with mass spectrometry. Results confirmed the reasonability of the developed method.

  6. Peak ventilatory responses during cycling and swimming in pregnant and nonpregnant women.

    Science.gov (United States)

    Spinnewijn, W E; Wallenburg, H C; Struijk, P C; Lotgering, F K

    1996-08-01

    This study was designed to determine whether pregnancy affects peak O2 uptake (VO2peak) during swimming compared with cycling. We studied 11 women at 30-34 wk gestation and 8-12 wk postpartum. We measured heart rate (HR), O2 uptake (VO2), CO2 output (VCO2), minute ventilation (VE), and lactic acid concentration. Peak HR was not significantly affected by the type of exercise or by pregnancy. VO2peak was 9% lower during swimming than during cycling but was not affected by pregnancy, with values for pregnancy cycling, pregnancy swimming, postpartum cycling, and postpartum swimming of 2.36 +/- 0.12, 2.11 +/- 0.11, 2.29 +/- 0.10, and 2.12 +/- 0.07 l/min, respectively. Peak VCO2 (VCO2peak) and peak VE were significantly lower during swimming than during cycling by 18-25%, but only VCO2peak during swimming was affected by pregnancy (-10%). Lactic acid concentrations were 12-17% lower after swimming than after cycling and 17-31% lower during pregnancy than postpartum. We conclude that perceived maximal exertion is reached at a lower percent maximal VO2 in swimming than in cycling and that the reduced energy expenditure is reflected by lower VO2peak, VCO2peak, and peak VE. Pregnancy, however, does not affect VO2peak in cycling or swimming.

  7. Reliability and validity of a novel intermittent peak running speed test for Australian football.

    Science.gov (United States)

    Mooney, Mitchell G; Hunter, Jayden R; O'Brien, Brendan J; Berry, Jason T; Young, Warren B

    2011-04-01

    Australian football requires frequent intermittent sprinting close to peak running speed. However, tests assessing the capability to maintain intermittent peak running speed are not reported in scientific literature. Therefore, our objective is to report the reliability and validity of a novel intermittent peak running speed test. The intermittent peak running speed test required footballers to perform 10 repetitions on 25-second intervals. Each repetition required 15-m jogging, 20-m acceleration to peak speed, 10 m to sustain peak speed, 20-m deceleration, and finally a 15-m jog. Intermittent peak running speed was determined by portable global positioning system. To assess reliability, 26 footballers performed the intermittent peak running speed test on 2 occasions 3-5 days apart. Our results revealed that average peak speed had a coefficient of variation of 2.2% and an intraclass correlation of 0.91. To assess construct validity, average peak speed was compared between elite, sub-elite, and regional footballers. The average peak speed of the elite footballers (28.6 ± 1.7 km · h(-1)) was higher than that of the sub-elite (27.4 ± 1.7 km · h(-1)) and regional (27 ± 1.9 km · h(-1)) competitors (p intermittent peak running speed test possesses acceptable reliability and distinguishes between elite and sub-elite footballers.

  8. Percentage of peak-to-peak pulsatility of portal blood flow can predict right-sided congestive heart failure

    Institute of Scientific and Technical Information of China (English)

    Jui-Ting Hu; Sien-Sing Yang; Yun-Chih Lai; Cheng-Yen Shih; Cheng-Wen Chang

    2003-01-01

    AIM: To study the change of portal blood flow for the prediction of the status of right-sided heart failure by using non-invasive way.METHODS: We studied 20 patients with rheumatic and atherosclerotic heart diseases. All the patients had constant systemic blood pressure and body weight 1 week prior to the study. Cardiac index (CI), left ventricular end-diastolic pressure (LVEDP), mean aortic pressure (AOP), pulmonary wedge pressure (PWP), mean pulmonary arterial pressure (PAP), mean right atrial pressure (RAP), right ventricular end-diastolic pressure (RVEDP) were recorded during cardiac catheterization. Ten patients with RAP<10 mmHg were classified as Group 1. The remaining 10 patients with RAP ≥ 10 mmHg were classified as Group 2. Portal blood velocity profiles were studied using an ultrasonic Doppler within 12h after cardiac catheterization.RESULTS: CI, AOP, and LVEDP had no difference between two groups. Patients in Group 1 had normal PWP (14.6±7.3mmHg), PAP (25.0±8.2 mmHg), RAP (4.7±2.4 mmHg), and RVEDP (6.4±2.7 mmHg). Patients in Group 2 had increased PWP (29.9±9.3 mmHg), PAP (46.3±13.2 mmHg), RAP (17.5±5.7 mmHg), and RVEDP (18.3±5.6 mmHg) (P<0.001).Mean values of maximum portal blood velocity (Vmax), mean portal blood velocity (Vmean), cross-sectional area (Area)and portal blood flow volume (PBF) had no difference between 2 groups. All the patients in Group 1 had a continuous antegrade portal flow with a mean percentage of peak-topeak pulsatility (PP) 27.0±8.9 % (range: 17-40 %). All the patients in Group 2 had pulsatile portal flow with a mean PP 86.6±45.6 (range: 43-194 %). One patient had a transient stagnant and three patients had a transient hepatofugal portal flow, which occurred mainly during the ventricular systole. Vmax, Vmean and PBF had a positive correlation with CO (P<0.001) but not with AOP, LVEDP, PWP, PAP,RAP, and RVEDP.PP showed a good correlation (P<0.001)with PWP, PAP, RAP, and RVEDP but not with CI, AOP, and LVEDP. All

  9. A Robust Formant Extraction Algorithm Combining Spectral Peak Picking and Root Polishing

    Directory of Open Access Journals (Sweden)

    Seo Kwang-deok

    2006-01-01

    Full Text Available We propose a robust formant extraction algorithm that combines the spectral peak picking, formants location examining for peak merger checking, and the root extraction methods. The spectral peak picking method is employed to locate the formant candidates, and the root extraction is used for solving the peak merger problem. The location and the distance between the extracted formants are also utilized to efficiently find out suspected peak mergers. The proposed algorithm does not require much computation, and is shown to be superior to previous formant extraction algorithms through extensive tests using TIMIT speech database.

  10. CAGE_peaks_annotation - FANTOM5 | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us FANTOM5 CAGE_peaks_annotation Data detail Data name CAGE_peaks_annotation DOI 10.18908/lsdba....nbdc01389-010.V002 Version V2 10.18908/lsdba.nbdc01389-010.V002 Update History V1 - - Description of data contents Ann...file File name: CAGE_peaks_annotation File URL: ftp://ftp.biosciencedbc.jp/archiv...e/fantom5/datafiles/LATEST/extra/CAGE_peaks_annotation File size: 195 MB Simple search URL - Data acquisitio...on Download License Update History of This Database Site Policy | Contact Us CAGE_peaks_annotation - FANTOM5 | LSDB Archive ...

  11. Investigation of spectral shifts in a white light interferometer with a single interference peak

    Science.gov (United States)

    Xu, Chunhui; Yi, Yingyan; Shu, Zhuo; Li, Min

    2015-04-01

    When the optical path difference between the two arms of an interferometer is so small that only one peak exists within the measurable interference spectrum, traditional white light interference demodulation techniques based on two adjacent interference peaks are not a suitable choice. We report an experimental approach to measure the peak wavelength shifts with only a single interference peak in a fiber white light interferometer. The temperature measurement experiments prove a linear relationship between the peak wavelength and the temperature. The temperature resolution is 0.1°C in theory.

  12. Development of a modified sum-peak method for activity determination of some gamma emitters

    Energy Technology Data Exchange (ETDEWEB)

    Ogata, Yoshimune, E-mail: ogata@met.nagoya-u.ac.jp [Graduate School of Medicine, Nagoya University, Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Miyahara, Hiroshi [Gifu University of Medical Science, 795-1, Nagamine, Ichihiraga, Seki, Gifu 501-3892 (Japan); Ishigure, Nobuhito [Graduate School of Medicine, Nagoya University, Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Ishihara, Masashi [Nagoya City University, Kawasumi, Mizuho-cho, Mizuho-ku, Nagoya 467-8601 (Japan); Nishio, Masaaki [Nagoya University, Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan); Yamamoto, Seiichi [Graduate School of Medicine, Nagoya University, Daiko-minami, Higashi-ku, Nagoya 461-8673 (Japan)

    2015-03-01

    A novel sum-peak method was developed to measure samples containing multiple radionuclides. The conventional sum-peak method is one of the absolute radioactivity measurement methods for radionuclides emitting more than one photon in coincidence. The method requires the knowledge of the total count rate as well as the peak count rates and the sum peak count rate. If there are other radionuclides in a sample, it is fraught with difficulty to estimate the total count rate of the nuclide of interest. To solve the problem, a novel calculation method solely using the peak count rates and the sum peak count rate was developed by modifying the conventional sum-peak method. The new method was theoretically verified and experimentally investigated using {sup 60}Co and {sup 22}Na, and was successfully confirmed. It was proved that the modified sum-peak method is effective to measure samples with multiple radionuclides and is quite simple and practical. - Highlights: • A modified sum-peak method for simple and practical absolute radioactivity measurement was developed to determine the activity of nuclides emitting more than one photon in coincidence. • The method solely requires the peak count rates and the sum peak count rate without the knowledge of total count rate. • Activity of samples containing multiple radionuclides can be determined by the method.

  13. A processing method enabling the use of peak height for accurate and precise proton NMR quantitation.

    Science.gov (United States)

    Hays, Patrick A; Thompson, Robert A

    2009-10-01

    In NMR, peak area quantitation is the most common method used because the area under a peak or peak group is proportional to the number of nuclei at those frequencies. Peak height quantitation has not enjoyed as much utility because of poor precision and linearity as a result of inconsistent shapes and peak widths (measured at half height). By using a post-acquisition processing method employing a Gaussian or line-broadening (exponential decay) apodization (i.e. weighting function) to normalize the shape and width of the internal standard (ISTD) peak, the heights of an analyte calibration spectrum can be compared to the analyte peaks in a sample spectrum resulting in accurate and precise quantitative results. Peak height results compared favorably with 'clean' peak area results for several hundred illicit samples of methamphetamine HCl, cocaine HCl, and heroin HCl, of varying composition and purity. Using peak height and peak area results together can enhance the confidence in the reported purity value; a major advantage in high throughput, automated quantitative analyses. Published in 2009 by John Wiley & Sons, Ltd.

  14. THE PEAK LATENCY OF ORBITAL PRESACCADIC SPIKE POTENTIAL WITH HORIZONTAL EYE MOVEMENTS

    Institute of Scientific and Technical Information of China (English)

    单扬; MarkL.Moster; RichardA.Roemer[

    1996-01-01

    Purpose.To investigate the peak latency of the orbital presaccedic spike potential (SP) with horizontal eyemovement in normals.Methods. Orbital SP was recorded in 28 normal subjects from 8 electrodes around the eyes with Pz as the reference while performing 5°,10°,20°,30° and 40° horizontal saccedes to visual targets. SP peak latencywas measured from SP onset to SP peak on averaged data aligned on SP peak.Re,Its. Significant main effects on SP peak latency are found for saccade size (P0. 05). No significant main effect on SP peak htency is found for eye (P>0. 05). SP peak latency increases with increasing saccade size from 5° to 40°. SP peak latency is longer with saccades back to center than away from center, and with abducting saccades than with adducting saccades. SP peak latency differs at the electrode sites with an order from shorter to longer as follows; innercanth° (IC); inferior orbit (IO); outer canthus (OC); superior orbit (SO).Conclusions. The effects on the peak latency of orbital SP can be explained by the saccade dynamic property, volume conduction as weft as physiologic and anatomic factors of the eyes and orbits. The peak latency of orbital SP can be used to reflect the temporal characteristics of ocular motor units controlling saccedic eye movement.

  15. Statistical extremes and peak factors in wind-induced vibration of tall buildings

    Institute of Scientific and Technical Information of China (English)

    Ming-feng HUANG; Chun-man CHAN; Wen-juan LOU; Kenny Chung-Siu KWOK

    2012-01-01

    In the structural design of tall buildings,peak factors have been widely used to predict mean extreme responses of tall buildings under wind excitations.Vanmarcke's peak factor is directly related to an explicit measure of structural reliability against a Gaussian response process.We review the use of this factor for time-variant reliability design by comparing it to the conventional Davenport's peak factor.Based on the asymptotic theory of statistical extremes,a new closed-form peak factor,the so-called Gamma peak factor,can be obtained for a non-Gaussian resultant response characterized by a Rayleigh distribution process.Using the Gamma peak factor,a combined peak factor method was developed for predicting the expected maximum resultant responses of a building undergoing lateral-torsional vibration.The effects of the standard deviation ratio of two sway components and the inter-component correlation on the evaluation of peak resultant response were also investigated.Utilizing wind tunnel data derived from synchronous multi-pressure measurements,we carried out a wind-induced time history response analysis of the Commonwealth Advisory Aeronautical Research Council (CAARC) standard tall building to validate the applicability of the Gamma peak factor to the prediction of the peak resultant acceleration.Results from the building example indicated that the use of the Gamma peak factor enables accurate predictions to be made of the mean extreme resultant acceleration responses for dynamic serviceability performance design of modern tall buildings.

  16. Investigation of non-first-order TSC peaks with non-constant recombination lifetime

    Energy Technology Data Exchange (ETDEWEB)

    Dorendrajit Singh, S.; Gartia, R.K. (Manipur Univ. (India). Dept. of Physics)

    1994-04-14

    Thermally stimulated current peaks corresponding to saturated (completely filled) and non-saturated (partially filled) non-first-order thermoluminescence with non-constant recombination lifetime are investigated. The variation of peak temperature and peak shape are studied as trap filling continues to increase until saturation. A set of expressions based on the shape of the peak has been derived, which in principle can be used to evaluate activation energy of such thermally stimulated current peaks. The coefficients involved in the expression are presented for certain kinetic orders, namely 1.5, 2.0 and 2.5. The validity of this peak shape method as well as the method of various heating rates have been checked by considering some numerically computed thermally stimulated current peaks. (Author).

  17. Simultaneous estimation of noise variance and number of peaks in Bayesian spectral deconvolution

    CERN Document Server

    Tokuda, Satoru; Okada, Masato

    2016-01-01

    Heuristic identification of peaks from noisy complex spectra often leads to misunderstanding physical and chemical properties of matter. In this paper, we propose a framework based on Bayesian inference, which enables us to separate multi-peak spectra into single peaks statistically and is constructed in two steps. The first step is estimating both noise variance and number of peaks as hyperparameters based on Bayes free energy, which generally is not analytically tractable. The second step is fitting the parameters of each peak function to the given spectrum by calculating the posterior density, which has a problem of local minima and saddles since multi-peak models are nonlinear and hierarchical. Our framework enables escaping from local minima or saddles by using the exchange Monte Carlo method and calculates Bayes free energy. We discuss a simulation demonstrating how efficient our framework is and show that estimating both noise variance and number of peaks prevents overfitting, overpenalizing, and misun...

  18. Smart templates for peak pattern matching with comprehensive two-dimensional liquid chromatography.

    Science.gov (United States)

    Reichenbach, Stephen E; Carr, Peter W; Stoll, Dwight R; Tao, Qingping

    2009-04-17

    Comprehensive two-dimensional liquid chromatography (LCxLC) generates information-rich but complex peak patterns that require automated processing for rapid chemical identification and classification. This paper describes a powerful approach and specific methods for peak pattern matching to identify and classify constituent peaks in data from LCxLC and other multidimensional chemical separations. The approach records a prototypical pattern of peaks with retention times and associated metadata, such as chemical identities and classes, in a template. Then, the template pattern is matched to the detected peaks in subsequent data and the metadata are copied from the template to identify and classify the matched peaks. Smart Templates employ rule-based constraints (e.g., multispectral matching) to increase matching accuracy. Experimental results demonstrate Smart Templates, with the combination of retention-time pattern matching and multispectral constraints, are accurate and robust with respect to changes in peak patterns associated with variable chromatographic conditions.

  19. Evaluation preparation technology of Xiaochaihu granules using fingerprint-peak pattern matching%Evaluation preparation technology of Xiaochaihu granules using fingerprint-peak pattern matching

    Institute of Scientific and Technical Information of China (English)

    Yu-Qiong Wu; Yu- Qiang Gou; Jing Han; Ying-Yan Bi; Shi-Lan Feng; Fang-Di Hu; Chun- Ming Wang

    2011-01-01

    An approach was proposed to evaluate preparation technology by means of fingerprint-peak matching technology of high performance liquid chromatography with diode array detector (HPLC-DAD). Similarity and hierarchical clustering analysis (HCA) were applied

  20. The acute effects of static stretching on peak force, peak rate of force development and muscle activity during single- and multiple-joint actions in older women.

    Science.gov (United States)

    Gonçalves, Raquel; Gurjão, André Luiz Demantova; Jambassi Filho, José Claudio; Farinatti, Paulo De Tarso Veras; Gobbi, Lilian Teresa Bucken; Gobbi, Sebastião

    2013-01-01

    The present study investigated the acute effects of static stretching on peak force, peak rate of force development and integrated electromyography (iEMG) in 27 older women (65 ± 4 years; 69 ± 9 kg; 157 ± 1 cm; 28 ± 4 kg · m(-2)). The participants were tested during two exercises (leg press and knee extension) after two conditions: stretching and control. The data were collected on four days (counterbalanced with a 24-hour rest period). In the stretching condition, the quadriceps muscle was stretched (knee flexion) for three sets of 30 s with 30 s rest intervals. No significant difference was detected for peak force and peak rate of force development during the single- and multiple-joint exercises, regardless of the following interactions: condition (stretching and control) vs. time (pre x post x 10 x 20 x 30 minutes post; P > 0.05) and exercise vs. time (P > 0.05). Additionally, no significant interaction was found for the iEMG activity (condition vs. time; P > 0.05) in the single- and multiple-joint exercises. In conclusion, a small amount of stretching of an agonist muscle (quadriceps) did not affect the peak force, peak rate of force development and EMG activity in older women during single- and multiple-joint exercises.

  1. Contributions of Astronauts Aerobic Exercise Intensity and Time on Change in VO2peak during Spaceflight

    Science.gov (United States)

    Downs, Meghan E.; Buxton, Roxanne; Moore, Alan; Ploutz-Snyder, Robert; Ploutz-Snyder, Lori

    2014-01-01

    There is considerable variability among astronauts with respect to changes in maximal aerobic capacity (VO2peak) during International Space Station (ISS) missions, ranging from a 5% increase to 30% decline. Individual differences may be due to in-flight aerobic exercise time and intensity. PURPOSE: To evaluate the effects of in-flight aerobic exercise time and intensity on change in VO2peak during ISS missions. METHODS: Astronauts (N=11) performed peak cycle tests approx 60 days before flight (L-60), on flight day (FD) approx 14, and every approx 30 days thereafter. Metabolic gas analysis and heart rate (HR) were measured continuously during the test using the portable pulmonary function system. HR and duration of each in-flight cycle ergometer and treadmill (TM) session were recorded and averaged in time segments corresponding to each peak test. Mixed effects linear regression with exercise mode (TM or cycle) as a categorical variable was used to assess the contributions of exercise intensity (%time >70% peak HR or %time >90% peak HR) and time (min/wk), adjusted for body weight, on %change in VO2peak during the mission, and incorporating the repeated-measures experimental design. RESULTS: 110 observations were included in the model (4-6 peak cycle tests per astronaut, 2 exercise devices). VO2peak was reduced from preflight throughout the mission (FD14: 13+/-13% and FD 105: 8+/-10%). Exercise intensity (%peak HR: FD14=66+/-14; FD105=75+/-8) and time (min/wk: FD14=82+/-46; FD105=158+/-40) increased during flight. The models showed main effects for exercise time and intensity with no interactions between time, intensity, and device (70% peak HR: time [z-score=2.39; P=0.017], intensity [z-score=3.51; P=0.000]; 90% peak HR: time [zscore= 3.31; P=0.001], intensity [z-score=2.24; P=0.025]). CONCLUSION: Exercise time and intensity independently contribute to %change in VO2peak during ISS missions, indicating that there are minimal values for exercise time and intensity

  2. The evolution and present status of the study on peak oil in China

    Institute of Scientific and Technical Information of China (English)

    Pang Xiongqi; Zhao Lin; Feng Lianyong; Meng Qingyang; Tang Xu; Li Junchen

    2009-01-01

    Peak oil theory is a theory concerning long-term oil reserves and the rate of oil production.Peak oil refers to the maximum rate of the production of oil or gas in any area under consideration.Its inevitability is analyzed from three aspects.The factors that influence peak oil and their mechanisms are discussed.These include the amount of resources, the discovery maturity of resources, the depletion rate of reserves and the demand for oil.The advance in the study of peak oil in China is divided into three stages.The main characteristics, main researchers, forecast results and research methods are described in each stage.The progress of the study of peak oil in China is summarized and the present problems are analyzed.Finally three development trends of peak oil study in China are presented.

  3. A method for interpolating asymmetric peak shapes in multiplet γ-ray spectra

    Institute of Scientific and Technical Information of China (English)

    WANG Si-Guang; MAO Ya-Jun; TANG Pei-Jia; ZHU Bo; LIANG Yu-Tie

    2009-01-01

    The peak shapes ofT-rays at various energies must be known before unfolding the multiplet spectra obtained by using semiconductor or scintillation detectors. Traditional methods describe isolated peaks with multi-parameter fitting functions, and assume that most of these parameters do not vary with energy because it is rare to find a spectrum with enough isolated peaks to constrain their dependence. We present an algorithm for interpolating the T-ray profile at any intermediate energy given a pair of isolated T-ray peaks from the spectrum under consideration. The algorithm is tested on experimental data and leads to a good agreement between the interpolated profile and the fitting function. This method is more accurate than the traditional approach, since all aspects of the peak shape are allowed to vary with energy. New definitions of Left-Half Width at Half Maximum, and Right-Half Width at Half Maximum for peak shape description are introduced in this paper.

  4. Two-peak phenomena and formation origin in micellar electrokinetic capillary chromatography

    Institute of Scientific and Technical Information of China (English)

    陈冠华; 杨更亮; 田益玲; 陈义

    2003-01-01

    The formation origin of two peaks in micellar electrokinetic capillary chromatography by using cetyltrimethylaminium bromide (or sodium dodecyl sulfate) as pseudo stationary phase is studied. It is pointed out that two peaks may appear for one component in certain conditions. Experiments show that the relative areas of the two peaks of the corresponding component depend on the time and temperature of reaction between the analyte and the surfactant, and the concentration of surfactant in the sample solution. One of the two peaks increase with the increase of surfactant concentration in the sample solution while reverse for another peak. Temperature can accelerate the reaction process. This means that the interaction between analyte and surfactant is a slow process, and a stable substance can be produced from the interaction and leads to the formation of two peaks. The standpoint is confirmed by the infrared and nuclear magnetic resonance spectra of the product from the reaction between cetyltrimethylaminium bromide and m-hydroxyl benzoic acid.

  5. Influence of substitutional atoms on the Snoek peak of carbon in b.c.c. iron

    Energy Technology Data Exchange (ETDEWEB)

    Saitoh, Hajime; Yoshinaga, Naoki; Ushioda, Kohsaku

    2004-03-08

    The influence of substitutional atoms (Mn, P, Si, Al, Cr, Co) on the C Snoek peak in b.c.c. iron was investigated. In the dilute range of the substitutes, the addition of Co, Mn, Cr, Si, P and Al resulted in the decreases in Snoek peak height in this ascending order. However, the addition of Mn to the Fe-C-P alloy hardly changes Snoek peak height. There is even a case that Snoek peak height is increased by further Mn addition to this alloy. They can be explained systematically by the proposed model wherein the solute carbon present in the influence region where the lattice distortion around the substitute is greater than the threshold value cannot contribute to the Snoek peak. The strain field generated by a substitutional atom due to the difference in atomic size is concluded to be the main reason for the reduction in Snoek peak height.

  6. Comparison between summing-up algorithms to determine areas of small peaks on high baselines

    Science.gov (United States)

    Shi, Quanlin; Zhang, Jiamei; Chang, Yongfu; Qian, Shaojun

    2005-12-01

    It is found that the minimum detectable activity (MDA) has a same tendency as the relative standard deviation (RSD) and a particular application is characteristic of the ratio of the peak area to the baseline height. Different applications need different algorithms to reduce the RSD of peak areas or the MDA of potential peaks. A model of Gaussian peaks superposed on linear baselines is established to simulate the multichannel spectrum and summing-up algorithms such as total peak area (TPA), and Covell and Sterlinski are compared to find the most appropriate algorithm for different applications. The results show that optimal Covell and Sterlinski algorithms will yield MDA or RSD half lower than TPA when the areas of small peaks on high baselines are to be determined. The conclusion is proved by experiment.

  7. Power Allocation for Fading Channels with Peak-to-Average Power Constraints

    CERN Document Server

    Nguyen, Khoa D; Rasmussen, Lars K

    2008-01-01

    Power allocation with peak-to-average power ratio constraints is investigated for transmission over Nakagami-m fading channels with arbitrary input distributions. In the case of delay-limited block-fading channels, we find the solution to the minimum outage power allocation scheme with peak-to-average power constraints and arbitrary input distributions, and show that the signal-to-noise ratio exponent for any finite peak-to-average power ratio is the same as that of the peak-power limited problem, resulting in an error floor. In the case of the ergodic fully-interleaved channel, we find the power allocation rule that yields the maximal information rate for an arbitrary input distribution and show that capacities with peak-to-average power ratio constraints, even for small ratios, are very close to capacities without peak-power restrictions.

  8. Automatic Estimation of Peak Regions in Gamma-Ray Spectra Measured by NaI Detector

    Institute of Scientific and Technical Information of China (English)

    ZHU Meng-Hua; LIU Liang-Gang; XU Ao-Ao; Ma Tao

    2008-01-01

    We present an approach to estimate the width of peak regions for the background elimination of gamma ray spectrum. The synthetic and experimental data are used to test this method. With the estimated peak regions using the proposed method in the whole spectra, we find that the approach is simple and effective enough for the background elimination cooperating with the statistics-sensitive nonlinear iterative peak-clipping method.

  9. Cosmological Constraints From Weak Lensing Peak Statistics With CFHT Stripe-82 Survey

    CERN Document Server

    Liu, Xiangkun; Li, Ran; Shan, Huanyuan; Wang, Qiao; Fu, Liping; Fan, Zuhui; Kneib, Jean-Paul; Leauthaud, Alexie; Van Waerbeke, Ludovic; Makler, Martin; Moraes, Bruno; Erben, Thomas; Charbonnier, Aldée

    2014-01-01

    We derived constraints on cosmological parameters using weak lensing peak statistics measured on the $\\sim130~\\rm{deg}^2$ of the Canada-France-Hawaii Telescope Stripe82 Survey (CS82). This analysis, based on a fast GPU code, demonstrates the feasibility of using peak statistics in cosmological studies. For our measurements, we considered peaks with signal-to-noise ratio in the range of $\

  10. A non-parametric peak calling algorithm for DamID-Seq.

    Directory of Open Access Journals (Sweden)

    Renhua Li

    Full Text Available Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS of double sex (DSX-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq. One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only. After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1 reads resampling; 2 reads scaling (normalization and computing signal-to-noise fold changes; 3 filtering; 4 Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC. We also used irreproducible discovery rate (IDR analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width.

  11. A non-parametric peak calling algorithm for DamID-Seq.

    Science.gov (United States)

    Li, Renhua; Hempel, Leonie U; Jiang, Tingbo

    2015-01-01

    Protein-DNA interactions play a significant role in gene regulation and expression. In order to identify transcription factor binding sites (TFBS) of double sex (DSX)-an important transcription factor in sex determination, we applied the DNA adenine methylation identification (DamID) technology to the fat body tissue of Drosophila, followed by deep sequencing (DamID-Seq). One feature of DamID-Seq data is that induced adenine methylation signals are not assured to be symmetrically distributed at TFBS, which renders the existing peak calling algorithms for ChIP-Seq, including SPP and MACS, inappropriate for DamID-Seq data. This challenged us to develop a new algorithm for peak calling. A challenge in peaking calling based on sequence data is estimating the averaged behavior of background signals. We applied a bootstrap resampling method to short sequence reads in the control (Dam only). After data quality check and mapping reads to a reference genome, the peaking calling procedure compromises the following steps: 1) reads resampling; 2) reads scaling (normalization) and computing signal-to-noise fold changes; 3) filtering; 4) Calling peaks based on a statistically significant threshold. This is a non-parametric method for peak calling (NPPC). We also used irreproducible discovery rate (IDR) analysis, as well as ChIP-Seq data to compare the peaks called by the NPPC. We identified approximately 6,000 peaks for DSX, which point to 1,225 genes related to the fat body tissue difference between female and male Drosophila. Statistical evidence from IDR analysis indicated that these peaks are reproducible across biological replicates. In addition, these peaks are comparable to those identified by use of ChIP-Seq on S2 cells, in terms of peak number, location, and peaks width.

  12. Can We Distinguish Emotions from Faces? Investigation of Implicit and Explicit Processes of Peak Facial Expressions

    OpenAIRE

    2016-01-01

    Most previous studies on facial expression recognition have focused on the moderate emotions; to date, few studies have been conducted to investigate the explicit and implicit processes of peak emotions. In the current study, we used transiently peak intense expression images of athletes at the winning or losing point in competition as materials, and investigated the diagnosability of peak facial expressions at both implicit and explicit levels. In Experiment 1, participants were instructed t...

  13. Characterization of the 107S peak on hepatic polysomal profiles from carbon tetrachloride-treated rats

    Energy Technology Data Exchange (ETDEWEB)

    Lilja, H.S.; Holbrook, D.J. Jr.

    1981-04-01

    A peak intermediate to the monomer and dimer peaks on hepatic polysomal profiles of CCl/sub 4/-treated rats (1 ml/kg for 3 h) was characterized. The intermediate peak had a sedimentation coefficient of 107S. The ratio of the 18S:28S ribosomal RNA in the isolated 107S material showed that the 107S structure consisted of a complex containing one 40S and two 60S ribosomal subunits.

  14. Highly intense lightning over the oceans: Estimated peak currents from global GLD360 observations

    OpenAIRE

    İnan, Umran Savaş; Said, R. K.; Cohen, M. B

    2013-01-01

    We present the ?rst global distribution of the average estimated peak currents in negative lightning ?ashes using 1 year of continuous data from the Vaisala global lightning data set GLD360. The data set, composed of 353 million ?ashes, was compared with the National Lightning Detection NetworkTM for peak current accuracy, location accuracy, and detection ef?ciency. The validation results demonstrated a mean (geometric mean) peak current magnitude error of 21% (6%), a median lo...

  15. Noise peaks influence communication in the operating room. An observational study.

    Science.gov (United States)

    Keller, Sandra; Tschan, Franziska; Beldi, Guido; Kurmann, Anita; Candinas, Daniel; Semmer, Norbert K

    2016-12-01

    Noise peaks are powerful distractors. This study focuses on the impact of noise peaks on surgical teams' communication during 109 long abdominal surgeries. We related measured noise peaks during 5-min intervals to the amount of observed communication during the same interval. Results show that noise peaks are associated with less case-relevant communication; this effect is moderated by the level of surgical experience; case-relevant communications decrease under high noise peak conditions among junior, but not among senior surgeons. However, case-irrelevant communication did not decrease under high noise level conditions, rather there was a trend to more case-irrelevant communication under high noise peaks. The results support the hypothesis that noise peaks impair communication because they draw on attentional resources rather than impairing understanding of communication. As case-relevant communication is important for surgical performance, exposure to high noise peaks in the OR should be minimised especially for less experienced surgeons. Practitioner Summary: This study investigated whether noise during surgeries influenced the communication within surgical teams. During abdominal surgeries, noise levels were measured and communication was observed. Results showed that high noise peaks reduced the frequency of patient-related communication, but did not reduce patient-irrelevant communication. Noise may negatively affect team coordination in surgeries.

  16. Peak Detection Method Evaluation for Ion Mobility Spectrometry by Using Machine Learning Approaches

    DEFF Research Database (Denmark)

    Hauschild, Anne-Christin; Kopczynski, Dominik; D'Addario, Marianna

    2013-01-01

    machine learning methods exist, an inevitable preprocessing step is reliable and robust peak detection without manual intervention. In this work we evaluate four state-of-the-art approaches for automated IMS-based peak detection: local maxima search, watershed transformation with IPHEx, region......-merging with VisualNow, and peak model estimation (PME).We manually generated Metabolites 2013, 3 278 a gold standard with the aid of a domain expert (manual) and compare the performance of the four peak calling methods with respect to two distinct criteria. We first utilize established machine learning methods...

  17. Spatial Ion Peak Compression and its Utility in Ion Mobility Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Garimella, Sandilya V. B.; Ibrahim, Yehia M.; Tang, Keqi; Webb, Ian K.; Baker, Erin S.; Tolmachev, Aleksey V.; Chen, Tsung-Chi; Anderson, Gordon A.; Smith, Richard D.

    2016-04-06

    A novel concept for ion spatial peak compression is described, and discussed primarily in the context of ion mobility spectrometry (IMS). Using theoretical and numerical methods, the effects of using non-constant (e.g., linearly varying) electric fields on ion distributions (e.g., an ion mobility peak) is evaluated both in the physical and temporal domains. The application of linearly decreasing electric field in conjunction with conventional drift field arrangements is shown to lead to a reduction in IMS physical peak width. When multiple ion packets in a selected mobility window are simultaneously subjected to such fields, there is ion packet compression, i.e., a reduction in peak widths of all species. This peak compression occurs with a modest reduction of resolution, but which can be quickly recovered as ions drift in a constant field after the compression event. Compression also yields a significant increase in peak intensities. In addition, approaches for peak compression in traveling wave IMS are also discussed. Ion mobility peak compression can be particularly useful for mitigating diffusion driven peak spreading over very long path length separations (e.g., in cyclic multi-pass arrangements), and for achieving higher S/N and IMS resolution over a selected mobility range.

  18. PICKY: a novel SVD-based NMR spectra peak picking method.

    Science.gov (United States)

    Alipanahi, Babak; Gao, Xin; Karakoc, Emre; Donaldson, Logan; Li, Ming

    2009-06-15

    Picking peaks from experimental NMR spectra is a key unsolved problem for automated NMR protein structure determination. Such a process is a prerequisite for resonance assignment, nuclear overhauser enhancement (NOE) distance restraint assignment, and structure calculation tasks. Manual or semi-automatic peak picking, which is currently the prominent way used in NMR labs, is tedious, time consuming and costly. We introduce new ideas, including noise-level estimation, component forming and sub-division, singular value decomposition (SVD)-based peak picking and peak pruning and refinement. PICKY is developed as an automated peak picking method. Different from the previous research on peak picking, we provide a systematic study of the proposed method. PICKY is tested on 32 real 2D and 3D spectra of eight target proteins, and achieves an average of 88% recall and 74% precision. PICKY is efficient. It takes PICKY on average 15.7 s to process an NMR spectrum. More important than these numbers, PICKY actually works in practice. We feed peak lists generated by PICKY to IPASS for resonance assignment, feed IPASS assignment to SPARTA for fragments generation, and feed SPARTA fragments to FALCON for structure calculation. This results in high-resolution structures of several proteins, for example, TM1112, at 1.25 A. PICKY is available upon request. The peak lists of PICKY can be easily loaded by SPARKY to enable a better interactive strategy for rapid peak picking.

  19. Observation of Robust Quantum Resonance Peaks in an Atom Optics Kicked Rotor with Amplitude Noise

    CERN Document Server

    Sadgrove, M; Mullins, T; Parkins, S; Leonhardt, R; Sadgrove, Mark; Hilliard, Andrew; Mullins, Terry; Parkins, Scott; Leonhardt, Rainer

    2004-01-01

    The effect of pulse train noise on the energy peaks at quantum resonance seen in the Atom Optics Kicked Rotor is investigated experimentally. Quantum resonance peaks in the late time energy of the atoms were found to be completely robust against noise applied to the kicking amplitude but even small levels of noise on the kicking period lead to destruction of the quantum resonance peak. The robustness of low energy levels to either side of the resonance peak to amplitude noise and their comparative susceptibility to period noise is explained in terms of a recurrence of classically stable dynamics which occurs near quantum resonance.

  20. The determination of intrinsic trapping parameters of a thermoluminescence peak of BeO

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Takao [Ashikaga Inst. of Technology, Tochigi (Japan). Div. of General Education; Gartia, R.K. [Manipur Univ. (India). Dept. of Physics

    1996-10-14

    It has been shown that a thermoluminescence (TL) peak of BeO cannot be fitted with a numerically generated glow peak involving only three trapping parameters, namely trap depth, frequency factor and order of kinetics. The peak can be fitted with a TL peak numerically generated by the exact solutions of the basic differential equations. This enables one to determine the five important intrinsic trapping parameters: trap depth, frequency factor, retrapping probability, recombination probability and the concentration of a disconnected trap, an impossible feat under the kinetics formalism. (author).

  1. Application of the Multi-Peaked Analytically Extended Function to Representation of Some Measured Lightning Currents

    CERN Document Server

    Lundengård, Karl; Javor, Vesna; Silvestrov, Sergei

    2016-01-01

    A multi-peaked form of the analytically extended function (AEF) is used for approximation of lightning current waveforms in this paper. The AEF function's parameters are estimated using the Marquardt least-squares method (MLSM), and the general procedure for fitting the $p$-peaked AEF function to a waveform with an arbitrary (finite) number of peaks is briefly described. This framework is used for obtaining parameters of 2-peaked waveforms typically present when measuring first negative stroke currents. Advantages, disadvantages and possible improvements of the approach are also discussed.

  2. 110° C thermoluminescence glow peak of quartz – A brief review

    Indian Academy of Sciences (India)

    D K Koul

    2008-12-01

    The 110°C glow peak of quartz, though unstable at room temperature, has worked wonderfully in archaeology and retrospective dosimetry due to its pre-dose sensitization property. Various aspects of the peak, like its nature, defect centres involved, the impact of different stimuli and its application have been extensively studied. The main aims of this review are to (i) summarize briefly the work carried out on the various facets of this TL glow peak during the last four decades and (ii) identify the areas which need further attention in order to have a better understanding of the luminescence characteristics of this TL peak.

  3. CMEs during the Two Activity Peaks in Cycle 24 and their Space Weather Consequences

    CERN Document Server

    Gopalswamy, N; Akiyama, S; Yashiro, S; Thakur, N

    2015-01-01

    We report on a comparison between space weather events that occurred around the two peaks in the sunspot number (SSN) during solar cycle 24. The two SSN peaks occurred in the years 2012 and 2014. Even though SSN was larger during the second peak, we find that there were more space weather events during the first peak. The space weather events we considered are large solar energetic particle (SEP) events and major geomagnetic storms associated with coronal mass ejections (CMEs). We also considered interplanetary type II radio bursts, which are indicative of energetic CMEs driving shocks. When we compared the CME properties between the two SSN peaks, we find that more energetic CMEs occurred during the 2012 peak. In particular, we find that CMEs accompanying IP type II bursts had an average speed of 1543 km/s during the 2012 peak compared to 1201 km/s during the 2014 peak. This result is consistent with the reduction in the average speed of the general population of CMEs during the second peak. All SEP events w...

  4. Techniques to estimate generalized skew coefficients of annual peak streamflow for natural basins in Texas

    Science.gov (United States)

    Judd, Linda J.; Asquith, William H.; Slade, Raymond M.

    1996-01-01

    This report presents two techniques to estimate generalized skew coefficients used for log-Pearson Type III peak-streamflow frequency analysis of natural basins in Texas. A natural basin has less than 10 percent impervious cover, and less than 10 percent of its drainage area is controlled by reservoirs. The estimation of generalized skew coefficients is based on annual peak and historical peak streamflow for all U.S. Geological Survey streamflow-gaging stations having at least 20 years of annual peak-streamflow record from natural basins in Texas. Station skew coefficients calculated for each of 255 Texas stations were used to estimate generalized skew coefficients for Texas.

  5. Peak Detection Method Evaluation for Ion Mobility Spectrometry by Using Machine Learning Approaches

    DEFF Research Database (Denmark)

    Hauschild, Anne-Christin; Kopczynski, Dominik; D'Addario, Marianna;

    2013-01-01

    machine learning methods exist, an inevitable preprocessing step is reliable and robust peak detection without manual intervention. In this work we evaluate four state-of-the-art approaches for automated IMS-based peak detection: local maxima search, watershed transformation with IPHEx, region......-merging with VisualNow, and peak model estimation (PME).We manually generated Metabolites 2013, 3 278 a gold standard with the aid of a domain expert (manual) and compare the performance of the four peak calling methods with respect to two distinct criteria. We first utilize established machine learning methods...

  6. Mechanisms of TL for production of the 230 {sup o}C peak in natural sodalite

    Energy Technology Data Exchange (ETDEWEB)

    Cano, Nilo F., E-mail: nilocano@dfn.if.usp.b [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-090, Sao Paulo (Brazil); Professional School of Physics, University of San Agustin of Arequipa, Av. Independencia S/N, Arequipa (Peru); Blak, Ana R. [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-090, Sao Paulo (Brazil); Ayala-Arenas, Jorge S. [Professional School of Physics, University of San Agustin of Arequipa, Av. Independencia S/N, Arequipa (Peru); Watanabe, Shigueo [Institute of Physics, University of Sao Paulo, Rua do Matao, Travessa R, 187, CEP 05508-090, Sao Paulo (Brazil)

    2011-02-15

    The thermoluminescence (TL) peak in natural sodalite near 230 {sup o}C, which appears only after submitted to thermal treatments and to gamma irradiation, has been studied in parallel with electron paramagnetic resonance (EPR) spectrum appearing under the same procedure. This study revealed a full correlation between the 230 {sup o}C TL peak and the eleven hyperfine lines from EPR spectrum. In both case, the centers disappear at the same temperature and are restored after gamma irradiation. A complete model for the 230 {sup o}C TL peak is presented and discussed. In addition to the correlation and TL model, specific characteristics of the TL peaks are described.

  7. R-Peak Time: An Electrocardiographic Parameter with Multiple Clinical Applications.

    Science.gov (United States)

    Pérez-Riera, Andrés Ricardo; de Abreu, Luiz Carlos; Barbosa-Barros, Raimundo; Nikus, Kjell C; Baranchuk, Adrian

    2016-01-01

    In the 12-lead electrocardiogram (ECG), the time from the onset of the QRS complex (Q or R wave) to the apex or peak of R or to R' (when present), using indirect or semidirect surface unipolar precordial leads, bipolar limb leads or unipolar limb leads, is called ventricular activation time (VAT), R wave peak time (RWPT), R-peak time or intrinsicoid deflection (ID). The R-peak time in a specific ECG lead is the interval from the earliest onset of the QRS complex, preferably determined from multiple simultaneously recorded leads, to the peak (maximum) of the R wave or R' if present. Irrespective of the relative height of the R and R' waves, the R-peak time is measured to the second peak. The parameter corresponds to the time of the electrical activation occurring from the endocardium to the epicardium as reflected by the recording electrode located at a variable distance on the body surface, depending on the lead type: a unipolar precordial lead, a bipolar or unipolar limb lead. In normal conditions, the R-peak time for the thinner-walled right ventricle is measured from lead V1 or V2 and its upper limit of normal is 35 ms. The R-peak time for the left ventricle (LV) is measured from leads V5 to V6 and 45 ms is considered the upper limit of normal. In this manuscript, we review the clinical applications of this parameter.

  8. A NEW PEAK (T4) IN THE 13C-NMR SPECTRUM OF POLYBUTADIENE

    Institute of Scientific and Technical Information of China (English)

    ZHOU Zinan; XIE Demin; ZHANG Jianguo; WU Qinyi; FENG Zhiliu

    1983-01-01

    A new peak at 39.0 ppm in the 13C-NMR spectrum of polybutadiene (PBD) was discovered.This peak is assigned to the fourth peak (T4) of trans-1,4-sequence marked with an asterisk as shown in Fig. 3 in the text.The occurrence of T4 carbon nuclei is strongly affected by their neighboring 1,2-units. So long as both contents of trans-1,4- and 1,2-units attain their proper amounts the peak (T4) with appear in the 13C-NMR spectrum of PBD.

  9. Characterizing the peak in the cosmic microwave background angular power spectrum

    Science.gov (United States)

    Knox; Page

    2000-08-14

    A peak has been unambiguously detected in the cosmic microwave background angular spectrum. Here we characterize its properties with fits to phenomenological models. We find that the TOCO and BOOM/NA data determine the peak location to be in the range 175-243 and 151-259, respectively (at 95% confidence) and determine the peak amplitude to be between approximately 70 and 90 &mgr;K. The peak shape is consistent with inflation-inspired flat, cold dark matter plus cosmological constant models of structure formation with adiabatic, nearly scale invariant initial conditions. It is inconsistent with open models and presents a great challenge to defect models.

  10. WaVPeak: Picking NMR peaks through wavelet-based smoothing and volume-based filtering

    KAUST Repository

    Liu, Zhi

    2012-02-10

    Motivation: Nuclear magnetic resonance (NMR) has been widely used as a powerful tool to determine the 3D structures of proteins in vivo. However, the post-spectra processing stage of NMR structure determination usually involves a tremendous amount of time and expert knowledge, which includes peak picking, chemical shift assignment and structure calculation steps. Detecting accurate peaks from the NMR spectra is a prerequisite for all following steps, and thus remains a key problem in automatic NMR structure determination. Results: We introduce WaVPeak, a fully automatic peak detection method. WaVPeak first smoothes the given NMR spectrum by wavelets. The peaks are then identified as the local maxima. The false positive peaks are filtered out efficiently by considering the volume of the peaks. WaVPeak has two major advantages over the state-of-the-art peak-picking methods. First, through wavelet-based smoothing, WaVPeak does not eliminate any data point in the spectra. Therefore, WaVPeak is able to detect weak peaks that are embedded in the noise level. NMR spectroscopists need the most help isolating these weak peaks. Second, WaVPeak estimates the volume of the peaks to filter the false positives. This is more reliable than intensity-based filters that are widely used in existing methods. We evaluate the performance of WaVPeak on the benchmark set proposed by PICKY (Alipanahi et al., 2009), one of the most accurate methods in the literature. The dataset comprises 32 2D and 3D spectra from eight different proteins. Experimental results demonstrate that WaVPeak achieves an average of 96%, 91%, 88%, 76% and 85% recall on 15N-HSQC, HNCO, HNCA, HNCACB and CBCA(CO)NH, respectively. When the same number of peaks are considered, WaVPeak significantly outperforms PICKY. The Author(s) 2012. Published by Oxford University Press.

  11. The Schrodinger Basin and Peak-Ring Formation on the Moon: Implications for the Earth's Chicxulub Crater

    Science.gov (United States)

    Kring, D. A.; Collins, G. S.; Kramer, G. Y.; Potter, R. W. K.; Chandnani, M.

    2016-08-01

    Geological mapping of the Moon's Schrodinger peak ring is integrated with numerical modeling to evaluate the process of peak ring formation. Implications for the Chicxulub crater on Earth, whose peak ring is currently being drilled, are discussed.

  12. Potential for deep basin-centered gas accumulation in Travis Peak (Hosston) Formation, Gulf Coastal Basin

    Science.gov (United States)

    Bartberger, Charles E.; Dyman, Thaddeus S.; Condon, Steven M.

    2003-01-01

    The potential of Lower Cretaceous sandstones of the Travis Peak Formation in the northern Gulf Coast Basin to harbor a basin-centered gas accumulation was evaluated by examining (1) the depositional and diagenetic history and reservoir properties of Travis Peak sandstones, (2) the presence and quality of source rocks for generating gas, (3) the burial and thermal history of source rocks and time of gas generation and migration relative to tectonic development of Travis Peak traps, (4) gas and water recoveries from drill-stem and formation tests, (5) the distribution of abnormal pressures based on shut-in-pressure data, and (6) the presence or absence of gas-water contacts associated with gas accumulations in Travis Peak sandstones. The Travis Peak Formation (and correlative Hosston Formation) is a basinward-thickening wedge of terrigenous clastic sedimentary rocks that underlies the northern Gulf Coast Basin from eastern Texas across northern Louisiana to southern Mississippi. Clastic infl ux was focused in two main fl uvial-deltaic depocenters?one located in northeastern Texas and the other in southeastern Mississippi and northeastern Louisiana. Across the main hydrocarbon-productive trend in eastern Texas and northern Louisiana, the Travis Peak Formation is about 2,000 ft thick. Most Travis Peak hydrocarbon production in eastern Texas comes from drilling depths between 6,000 and 10,000 ft. Signifi cant decrease in porosity and permeability occurs through that depth interval. Above 8,000-ft drilling depth in eastern Texas, Travis Peak sandstone matrix permeabilities often are signifi cantly higher than the 0.1-millidarcy (mD) cutoff that characterizes tight-gas reservoirs. Below 8,000 ft, matrix permeability of Travis Peak sandstones is low because of pervasive quartz cementation, but abundant natural fractures impart signifi cant fracture permeability. Although pressure data within the middle and lower Travis Peak Formation are limited in eastern Texas

  13. Peak picking multidimensional NMR spectra with the contour geometry based algorithm CYPICK.

    Science.gov (United States)

    Würz, Julia M; Güntert, Peter

    2017-01-01

    The automated identification of signals in multidimensional NMR spectra is a challenging task, complicated by signal overlap, noise, and spectral artifacts, for which no universally accepted method is available. Here, we present a new peak picking algorithm, CYPICK, that follows, as far as possible, the manual approach taken by a spectroscopist who analyzes peak patterns in contour plots of the spectrum, but is fully automated. Human visual inspection is replaced by the evaluation of geometric criteria applied to contour lines, such as local extremality, approximate circularity (after appropriate scaling of the spectrum axes), and convexity. The performance of CYPICK was evaluated for a variety of spectra from different proteins by systematic comparison with peak lists obtained by other, manual or automated, peak picking methods, as well as by analyzing the results of automated chemical shift assignment and structure calculation based on input peak lists from CYPICK. The results show that CYPICK yielded peak lists that compare in most cases favorably to those obtained by other automated peak pickers with respect to the criteria of finding a maximal number of real signals, a minimal number of artifact peaks, and maximal correctness of the chemical shift assignments and the three-dimensional structure obtained by fully automated assignment and structure calculation.

  14. Peak picking and the assessment of separation performance in two-dimensional high performance liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Guiochon, Georges A [ORNL; Shalliker, R. Andrew [University of Western Sydney, Australia

    2010-01-01

    An algorithm was developed for 2DHPLC that automated the process of peak recognition, measuring their retention times, and then subsequently plotting the information in a two-dimensional retention plane. Following the recognition of peaks, the software then performed a series of statistical assessments of the separation performance, measuring for example, correlation between dimensions, peak capacity and the percentage of usage of the separation space. Peak recognition was achieved by interpreting the first and second derivatives of each respective one-dimensional chromatogram to determine the 1D retention times of each solute and then compiling these retention times for each respective fraction 'cut'. Due to the nature of comprehensive 2DHPLC adjacent cut fractions may contain peaks common to more than one cut fraction. The algorithm determined which components were common in adjacent cuts and subsequently calculated the peak maximum profile by interpolating the space between adjacent peaks. This algorithm was applied to the analysis of a two-dimensional separation of an apple flesh extract separated in a first dimension comprising a cyano stationary phase and an aqueous/THF mobile phase as the first dimension and a second dimension comprising C18-Hydro with an aqueous/MeOH mobile phase. A total of 187 peaks were detected.

  15. Parallels between Nutrition and Physical Activity: Research Questions in Development of Peak Bone Mass

    Science.gov (United States)

    Weaver, Connie M.

    2015-01-01

    Lifestyle choices are attributed to 40% to 60% of adult peak bone mass. The National Osteoporosis Foundation (NOF) sought to update its 2000 consensus statement on peak bone mass and partnered with the American Society for Nutrition, which, in turn, charged a 9-member writing committee with using a systematic review approach to update the previous…

  16. Peak triceps surae muscle activity is not specific to knee flexion angles during MVIC.

    Science.gov (United States)

    Hébert-Losier, Kim; Schneiders, Anthony G; García, José A; Sullivan, S John; Simoneau, Guy G

    2011-10-01

    There is limited research on peak activity of the separate triceps surae muscles in select knee flexion (KF) positions during a maximum voluntary isometric contraction (MVIC) used to normalize EMG signals. The aim of this study was to determine how frequent peak activity occurred during an MVIC for soleus (SOL), gastrocnemius medialis (GM), and gastrocnemius lateralis (GL) in select KF positions, and if these peaks were recorded in similar KF positions. Forty-eight healthy individuals performed unilateral plantar-flexion MVIC in standing with 0°KF and 45°KF, and in sitting with 90°KF. Surface EMG of SOL, GM, and GL were collected and processed in 250 ms epochs to determine peak root-mean-square amplitude. Peak activity was most frequently captured in standing and rarely in sitting, with no position selective to SOL, GM or GL activity. Peak GM and GL activity was more frequent in 0°KF than 45°KF, and more often in similar KF positions than not. Peak SOL activity was just as likely in 45°KF as 0°KF, and more in positions similar to GM, but not GL. The EMG amplitudes were at least 20% greater in positions that captured peak activity over those that did not. The overall findings support performing an MVIC in more than one KF position to normalize triceps surae EMG. It is emphasized that no KF position is selective to SOL, GM, or GL alone.

  17. J peak extraction from non-standard ballistocardiography data: a preliminary study.

    Science.gov (United States)

    Xin Li; Ye Li

    2016-08-01

    In recent years, several advanced algorithms based on clustering, multi-method or data fusion approaches have been proposed to estimate heartbeat intervals from non-standard ballistocardiography (BCG) data. These advanced algorithms generally have higher computational complexity than J-peak based algorithms. This fact motivated us to study the problem of extracting J peaks from non-standard BCG data, because if this extraction can be realized, then a low-complexity J-peak based algorithm can be used to fast estimate heartbeat intervals from non-standard BCG data. We found that most of the energy in J peaks is contained in a relatively narrow frequency band, called J-peak band, and that the heartbeat harmonics outside the J-peak band can cause the non-standard BCG waveform. According to these findings, a FIR linear phase filter with the J-peak band as its pass-band is proposed. The experimental result demonstrates the ability of the proposed filter to extract J peaks from non-standard BCG data.

  18. Weak lensing mass map and peak statistics in CFHT/Stripe82 survey

    CERN Document Server

    Shan, HuanYuan; Comparat, Johan; Jullo, Eric; Charbonnier, Aldee; Erben, Thomas; Makler, Martin; Moraes, Bruno; Van Waerbeke, Ludovic; Courbin, Frederic; Meylan, George; Tao, Charling; Taylor, James E

    2013-01-01

    We present the weak lensing mass map of the 173 tiles Canada-France-Hawaii Telescope Stripe82 Survey (CS82) with the effective area ~124 square degrees and study the peak statistics, including peak abundance, correlation functions and tangential-shear profile of peaks with the mass map. We find that (1) peak abundance detected in CS82 are consistent with predictions from a Lambda-CDM cosmological model, once noise effects are properly included; (2) correlation function of peaks with different signal-to-noise ratio (SNR) can be well fitted with power laws. Combining with the SDSS-III/Constant Mass (CMASS) galaxies, the cross-correlation between CMASS galaxies and high SNR peaks can be well-fitted with a power law; (3) the tangential shear profiles of the peaks increase with SNR. We concentrate on fitting spherical models to the tangential profiles with both singular isothermal sphere (SIS) and Navarro Frenk & White (NFW) models. For the high SNR peaks, the SIS model is rejected at ~3-sigma. Comparing the D...

  19. Parallels between Nutrition and Physical Activity: Research Questions in Development of Peak Bone Mass

    Science.gov (United States)

    Weaver, Connie M.

    2015-01-01

    Lifestyle choices are attributed to 40% to 60% of adult peak bone mass. The National Osteoporosis Foundation (NOF) sought to update its 2000 consensus statement on peak bone mass and partnered with the American Society for Nutrition, which, in turn, charged a 9-member writing committee with using a systematic review approach to update the previous…

  20. Unusual double-peaked emission in the SDSS quasar J093201.60 + 031858.7

    Science.gov (United States)

    Barrows, R. S.; Lacy, C. H. S.; Kennefick, D.; Kennefick, J.; Seigar, M. S.

    2011-02-01

    We examine spectral properties of the SDSS quasar J093201.60 + 031858.7, in particular the presence of strong blue peaks in the Balmer emission lines offset from the narrow lines by approximately 4200 km s -1. Asymmetry in the broad central component of the H β line indicates the presence of a double-peaked emitter. However, the strength and sharpness of the blue H β and blue H γ peaks make this quasar spectrum unique among double-peaked emitters identified from SDSS spectra. We fit a disk model to the H β line and compare this object with other unusual double-peaked quasar spectra, particularly candidate binary supermassive black holes (SMBHs). Under the binary SMBH scenario, we test the applicability of a model in which a second SMBH may produce the strong blue peak in the Balmer lines of a double-peaked emitter. If there were only one SMBH, a circular, Keplerian disk model fit would be insufficient, indicating some sort of asymmetry is required to produce the strength of the blue peak. In either case, understanding the nature of the complex line emission in this object will aid in further discrimination between a single SMBH with a complex accretion disk and the actual case of a binary SMBH.

  1. A method for the separation of overlapping peaks in cyclic voltammetry by means of semidifferential transformation

    NARCIS (Netherlands)

    Palys, M.J.; Palys, Marcin; Korba, Tomas; Bos, M.; van der Linden, W.E.

    1991-01-01

    A method for extracting single peaks from complex linear sweep and cyclic voltamperograms is presented. Voltamperograms are transformed by means of semidifferentiation, then all undesired peaks are removed from the semiderivative curve and replaced by calculated baselines. The resulting curve is

  2. Reference values for peak flow and FEV1 variation in healthy schoolchildren using home spirometry

    NARCIS (Netherlands)

    Brouwer, A. F. J.; Duiverman, E. J.; Brand, P. L. P.

    2008-01-01

    Current reference values for diurnal peak flow variation in healthy children (median 8.2%; 95th percentile 31%) are so high that considerable overlap exists with those of asthmatic children. These values have been obtained using written peak flow diaries, which are unreliable. The aim of the present

  3. 21 CFR 868.1860 - Peak-flow meter for spirometry.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Peak-flow meter for spirometry. 868.1860 Section 868.1860 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... spirometry. (a) Identification. A peak-flow meter for spirometry is a device used to measure a...

  4. The effect of hamstring flexibility on peak hamstring muscle strain in sprinting

    Directory of Open Access Journals (Sweden)

    Xianglin Wan

    2017-09-01

    Conclusion: A potential for hamstring injury exists during the late swing phase of sprinting. Peak hamstring muscle strains in sprinting are negatively correlated to hamstring flexibility across individuals. The magnitude of peak muscle strains is different among hamstring muscles in sprinting, which may explain the different injury rate among hamstring muscles.

  5. Peak broadening in paper chromatography and related techniques : V. Conditions for minimum separation time

    NARCIS (Netherlands)

    Lygny, C.L. de; Kok, E.C.M.

    1968-01-01

    In paper and thin-layer chromatography peak broadening is a function of the mean flow rate of the eluent, which in turn is a function of the distances of the starting point and solvent front from the eluent in the tank. Starting from the relationship between peak broadening and the positions of sta

  6. MULTICHANNEL ENERGY AND TIMING MEASUREMENTS WITH THE PEAK DETECTOR/DERANDOMIZER ASIC.

    Energy Technology Data Exchange (ETDEWEB)

    O' CONNOR,P.; DE GERONIMO,G.; GROSHOLZ,J.; KANDASAMY,A.; JUNNARKAR,S.; FRIED,J.

    2004-10-16

    The Peak Detector/Derandomizer ASIC (PDD) provides threshold discrimination, peak detection, time-to-amplitude conversion, analog memory, sparsification, and multiplexing for 32 channels of analog pulse data. In this work the spectroscopic capabilities of the chip (high resolution and high rate) are demonstrated along with correlated measurements of pulse risetime. Imaging and coincidence detection using the PDD chip will also be illustrated.

  7. A Peak Wind Probability Forecast Tool for Kennedy Space Center and Cape Canaveral Air Force Station

    Science.gov (United States)

    Crawford, Winifred; Roeder, William

    2008-01-01

    This conference abstract describes the development of a peak wind forecast tool to assist forecasters in determining the probability of violating launch commit criteria (LCC) at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) in east-central Florida. The peak winds are an important forecast element for both the Space Shuttle and Expendable Launch Vehicle (ELV) programs. The LCC define specific peak wind thresholds for each launch operation that cannot be exceeded in order to ensure the safety of the vehicle. The 45th Weather Squadron (45 WS) has found that peak winds are a challenging parameter to forecast, particularly in the cool season months of October through April. Based on the importance of forecasting peak winds, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a short-range peak-wind forecast tool to assist in forecasting LCC violatioas.The tool will include climatologies of the 5-minute mean end peak winds by month, hour, and direction, and probability distributions of the peak winds as a function of the 5-minute mean wind speeds.

  8. Allometric scaling of peak oxygen uptake in male roller hockey players under 17 years old

    NARCIS (Netherlands)

    Valente-dos-Santos, J.; Sherar, L.; Coelho-e-Silva, MJ; Pereira, J.R.; Vaz, V.; Cupido-dos-Santos, A.; Baxter-Jones, A.; Visscher, C.; Elferink-Gemser, M.T.; Malina, R.M.

    2013-01-01

    Peak oxygen uptake ((V) over dotO(2peak)) is routinely expressed in litres per minute and by unit of body mass (mL.kg(-1).min(-1)) despite the theoretical and statistical limitations of using ratios. Allometric modeling is an effective approach for partitioning body-size effects in a performance var

  9. Development of empirical correlation of peak friction angle with surface roughness of discontinuities using tilt test

    Science.gov (United States)

    Serasa, Ailie Sofyiana; Lai, Goh Thian; Rafek, Abdul Ghani; Simon, Norbert; Hussein, Azimah; Ern, Lee Khai; Surip, Noraini; Mohamed, Tuan Rusli

    2016-11-01

    The significant influence of surface roughness of discontinuity surfaces is a quantity that is fundamental to the understanding of shear strength of geological discontinuities. This is due to reason that the shear strength of geological discontinuities greatly influenced the mechanical behavior of a rock mass especially in stability evaluation of tunnel, foundation, and natural slopes. In evaluating the stability of these structures, the study of peak friction angle (Φpeak) of rough discontinuity surfaces has become more prominent seeing that the shear strength is a pivotal factor causing failures. The measurement of peak friction angle however, requires an extensive series of laboratory tests which are both time and cost demanding. With that in mind, this publication presents an approach in the form of an experimentally determined polynomial equation to estimate peak friction angle of limestone discontinuity surfaces by measuring the Joint Roughness Coefficient (JRC) values from tilt tests, and applying the fore mentioned empirical correlation. A total of 1967 tilt tests and JRC measurements were conducted in the laboratory to determine the peak friction angles of rough limestone discontinuity surfaces. A polynomial equation of ɸpeak = -0.0635JRC2 + 3.95JRC + 25.2 that exhibited 0.99 coefficient of determination (R2) were obtained from the correlation of JRC and peak friction angles. The proposed correlation offers a practical method for estimation of peak friction angles of rough discontinuity surfaces of limestone from measurement of JRC in the field.

  10. Peak nasal inspiratory flow: uma possível ferramenta para a motricidade orofacial? Peak nasal inspiratory flow: a possible instrument in orofacial myology?

    Directory of Open Access Journals (Sweden)

    Andréa Rodrigues Motta

    2010-12-01

    Full Text Available Os fonoaudiólogos que atuam no campo da Motricidade Orofacial atendem com frequência, pacientes com obstrução nasal; entretanto, nem sempre o acesso ao profissional responsável pelo diagnóstico otorrinolaringológico é fácil. O Peak Nasal Inspiratory Flow é um instrumento barato, de fácil manuseio, amplamente citado na literatura internacional, que tem por objetivo avaliar a patência nasal. O objetivo do presente estudo foi realizar uma revisão da literatura acerca do Peak Nasal Inspiratory Flow, fornecendo subsídios para reflexões acerca de seu emprego nos distúrbios miofuncionais orofaciais e cervicais. Para tanto, foi realizada uma revisão da literatura nas bases de dados Medline, Cochrane Library, LILACS e SciELO empregando-se os descritores peak, inspiratory, nasal e flow. O Peak Nasal Inspiratory Flow mostrou-se uma técnica simples, barata, validada e com boa reprodutibilidade. Parece, portanto, tratar-se de um instrumento útil para avaliação da patência nasal, apesar de algumas limitações, fornecendo dados complementares ao diagnóstico miofuncional orofacial e cervical. Entretanto, estudos clínicos precisam ser conduzidos para que se comprove ou refute a hipótese.The speech-language pathologists that work in the Orofacial Myology field frequently have patients with nasal obstruction; however, the access to the professional responsible for the diagnosis can be difficult at times. The Peak Nasal Inspiratory Flow is a cheap and easy to handle instrument, broadly cited in the international literature, that has the aim to evaluate nasal patency. The aim of this study was to review the current literature regarding the Peak Nasal Inspiratory Flow, enabling considerations about its use in cervical and orofacial myology disorders. The literature review consulted Medline, Cochrane Library, LILACS and SciELO databases, using the keywords: peak, inspiratory, nasal and flow. The results showed that Peak Nasal Inspiratory Flow

  11. A prospective population study of resting heart rate and peak oxygen uptake (the HUNT Study, Norway.

    Directory of Open Access Journals (Sweden)

    Javaid Nauman

    Full Text Available OBJECTIVES: We assessed the prospective association of resting heart rate (RHR at baseline with peak oxygen uptake (VO(2peak 23 years later, and evaluated whether physical activity (PA could modify this association. BACKGROUND: Both RHR and VO(2peak are strong and independent predictors of cardiovascular morbidity and mortality. However, the association of RHR with VO(2peak and modifying effect of PA have not been prospectively assessed in population studies. METHODS: In 807 men and 810 women free from cardiovascular disease both at baseline (1984-86 and follow-up 23 years later, RHR was recorded at both occasions, and VO(2peak was measured by ergospirometry at follow-up. We used Generalized Linear Models to assess the association of baseline RHR with VO(2peak, and to study combined effects of RHR and self-reported PA on later VO(2peak. RESULTS: There was an inverse association of RHR at baseline with VO(2peak (p<0.01. Men and women with baseline RHR greater than 80 bpm had 4.6 mL.kg(-1.min(-1 (95% confidence interval [CI], 2.8 to 6.3 and 1.4 mL.kg(-1.min(-1 (95% CI, -0.4 to 3.1 lower VO(2peak at follow-up compared with men and women with RHR below 60 bpm at baseline. We found a linear association of change in RHR with VO(2peak (p=0.03, suggesting that a decrease in RHR over time is likely to be beneficial for cardiovascular fitness. Participants with low RHR and high PA at baseline had higher VO(2peak than inactive people with relatively high RHR. However, among participants with relatively high RHR and high PA at baseline, VO(2peak was similar to inactive people with relatively low RHR. CONCLUSION: RHR is an important predictor of VO(2peak, and serial assessments of RHR may provide useful and inexpensive information on cardiovascular fitness. The results suggest that high levels of PA may compensate for the lower VO(2peak associated with a high RHR.

  12. Validity of a trunk-mounted accelerometer to assess peak accelerations during walking, jogging and running.

    Science.gov (United States)

    Wundersitz, Daniel W T; Gastin, Paul B; Richter, Chris; Robertson, Samuel J; Netto, Kevin J

    2015-01-01

    The purpose of this study was to validate peak acceleration data from an accelerometer contained within a wearable tracking device while walking, jogging and running. Thirty-nine participants walked, jogged and ran on a treadmill while 10 peak accelerations per movement were obtained (n = 390). A single triaxial accelerometer measured resultant acceleration during all movements. To provide a criterion measure of acceleration, a 12-camera motion analysis (MA) system tracked the position of a retro-reflective marker affixed to the wearable tracking device. Peak raw acceleration recorded by the accelerometer significantly overestimated peak MA acceleration (P jog compared with walk and for run compared to both other movements. As the magnitude of acceleration increased, the strength of the relationship between the accelerometer and the criterion measure decreased. These results indicate that filtered accelerometer data provide an acceptable means of assessing peak accelerations, in particular for walking and jogging.

  13. IDENTIFICATIONS PEAK HOURS ON INTERSECTIONS SET IN BIELSKO-BIAŁA CITY

    Directory of Open Access Journals (Sweden)

    Marcin KŁOS

    2016-03-01

    Full Text Available Traffic flow in cities is usually examined locally. This method is not effective for through traffic analysis. The paper discusses the problem of determining peak traffic hours taking into account vehicle distributions. Peak hours represent time periods of traffic flow which demand special treatment by traffic control systems. This is particularly important in the case of ITS. High values of traffic flow require relieving actions not only at the junctions but preferably along the transit routes. The north-south transit route in Bielsko-Biała was chosen for analysis. Instead of the usual two distinct peaks it is determined that the traffic flow is characterised by five peaks. This pattern is the result of specific location of the route, which links residential areas, industrial zones and shopping centres besides carrying through traffic. This multi peak graph more accurately models the traffic flow.

  14. txCoords: A Novel Web Application for Transcriptomic Peak Re-Mapping.

    Science.gov (United States)

    Yan, Zhangming; Liu, Ke; Xiang, Shunian; Sun, Zhirong

    2017-01-01

    Since the development of new technologies such as RIP-Seq and m(6)A-seq, peak calling has become an important step in transcriptomic sequencing data analysis. However, many of the reported genomic coordinates of transcriptomic peaks are incorrect owing to negligence of the introns. There is currently a lack of a convenient tool to address this problem. Here, we present txCoords, a novel and easy-to-use web application for transcriptomic peak re-mapping. txCoords can be used to correct the incorrectly reported transcriptomic peaks and retrieve the true sequences. It also supports visualization of the re-mapped peaks in a schematic figure or from the UCSC Genome Browser. Our web server is freely available at http://www.bioinfo.tsinghua.edu.cn/txCoords.

  15. Achievable peak electrode voltage reduction by neurostimulators using descending staircase currents to deliver charge.

    Science.gov (United States)

    Halpern, Mark

    2011-01-01

    This paper considers the achievable reduction in peak voltage across two driving terminals of an RC circuit when delivering charge using a stepped current waveform, comprising a chosen number of steps of equal duration, compared with using a constant current over the total duration. This work has application to the design of neurostimulators giving reduced peak electrode voltage when delivering a given electric charge over a given time duration. Exact solutions for the greatest possible peak voltage reduction using two and three steps are given. Furthermore, it is shown that the achievable peak voltage reduction, for any given number of steps is identical for simple series RC circuits and parallel RC circuits, for appropriate different values of RC. It is conjectured that the maximum peak voltage reduction cannot be improved using a more complicated RC circuit.

  16. Dissociated time course recovery between rate of force development and peak torque after eccentric exercise.

    Science.gov (United States)

    Molina, Renato; Denadai, Benedito S

    2012-05-01

    This study investigated the association between isokinetic peak torque (PT) of quadriceps and the corresponding peak rate of force development (peak RFD) during the recovery of eccentric exercise. Twelve untrained men (aged 21·7 ± 2·3 year) performed 100 maximal eccentric contractions for knee extensors (10 sets of 10 repetitions with a 2-min rest between each set) on isokinetic dynamometer. PT and peak RFD accessed by maximal isokinetic knee concentric contractions at 60° s(-1) were obtained before (baseline) and at 24 and 48 h after eccentric exercise. Indirect markers of muscle damage included delayed onset of muscle soreness (DOMS) and plasma creatine kinase (CK) activity. The eccentric exercise resulted in elevated DOMS and CK compared with baseline values. At 24 h, PT (-15·3%, P = 0·002) and peak RFD (-13·1%, P = 0·03) decreased significantly. At 48 h, PT (-7·9%, P = 0·002) was still decreased but peak RFD have returned to baseline values. Positive correlation was found between PT and peak RFD at baseline (r = 0·62, P = 0·02), 24 h (r = 0·99, P = 0·0001) and 48 h (r = 0·68, P = 0·01) after eccentric exercise. The magnitude of changes (%) in PT and peak RFD from baseline to 24 h (r = 0·68, P = 0·01) and from 24 to 48 h (r = 0·68, P = 0·01) were significantly correlated. It can be concluded that the muscle damage induced by the eccentric exercise affects differently the time course of PT and peak RFD recovery during isokinetic concentric contraction at 60° s(-1). During the recovery from exercise-induced muscle damage, PT and peak RFD are determined but not fully defined by shared putative physiological mechanisms. © 2011 The Authors. Clinical Physiology and Functional Imaging © 2011 Scandinavian Society of Clinical Physiology and Nuclear Medicine.

  17. Difference in peak weight transfer and timing based on golf handicap.

    Science.gov (United States)

    Queen, Robin M; Butler, Robert J; Dai, Boyi; Barnes, C Lowry

    2013-09-01

    Weight shift during the golf swing has been a topic of discussion among golf professionals; however, it is still unclear how weight shift varies in golfers of different performance levels. The main purpose of this study was to examine the following: (a) the changes in the peak ground reaction forces (GRF) and the timing of these events between high (HHCP) and low handicap (LHCP) golfers and (b) the differences between the leading and trailing legs. Twenty-eight male golfers were recruited and divided based on having an LHCP 9. Three-dimensional GRF peaks and the timing of the peaks were recorded bilaterally during a golf swing. The golf swing was divided into different phases: (a) address to the top of the backswing, (b) top of the backswing to ball contact, and (c) ball contact to the end of follow through. Repeated measures analyses of variance (α = 0.05) were completed for each study variable: the magnitude and the timing of peak vertical GRF, peak lateral GRF, and peak medial GRF (α = 0.05). The LHCP group had a greater transfer of vertical force from the trailing foot to the leading foot in phase 2 than the HHCP group. The LHCP group also demonstrated earlier timing of peak vertical force throughout the golf swing than the HHCP group. The LHCP and HHCP groups demonstrated different magnitudes of peak lateral force. The LHCP group had an earlier timing of peak lateral GRF in phase 2 and earlier timing of peak medial GRF in phases 1 and 2 than the HHCP group. In general, LHCP golfers demonstrated greater and earlier force generation than HHCP golfers. It may be relevant to consider both the magnitude of the forces and the timing of these events during golf-specific training to improve performance. These data reveal weight shifting differences that can be addressed by teaching professionals to help their students better understand weight transfer during the golf swing to optimize performance.

  18. Estimation of cardiac reserve by peak power: validation and initial application of a simplified index

    Science.gov (United States)

    Armstrong, G. P.; Carlier, S. G.; Fukamachi, K.; Thomas, J. D.; Marwick, T. H.

    1999-01-01

    OBJECTIVES: To validate a simplified estimate of peak power (SPP) against true (invasively measured) peak instantaneous power (TPP), to assess the feasibility of measuring SPP during exercise and to correlate this with functional capacity. DESIGN: Development of a simplified method of measurement and observational study. SETTING: Tertiary referral centre for cardiothoracic disease. SUBJECTS: For validation of SPP with TPP, seven normal dogs and four dogs with dilated cardiomyopathy were studied. To assess feasibility and clinical significance in humans, 40 subjects were studied (26 patients; 14 normal controls). METHODS: In the animal validation study, TPP was derived from ascending aortic pressure and flow probe, and from Doppler measurements of flow. SPP, calculated using the different flow measures, was compared with peak instantaneous power under different loading conditions. For the assessment in humans, SPP was measured at rest and during maximum exercise. Peak aortic flow was measured with transthoracic continuous wave Doppler, and systolic and diastolic blood pressures were derived from brachial sphygmomanometry. The difference between exercise and rest simplified peak power (Delta SPP) was compared with maximum oxygen uptake (VO(2)max), measured from expired gas analysis. RESULTS: SPP estimates using peak flow measures correlated well with true peak instantaneous power (r = 0.89 to 0.97), despite marked changes in systemic pressure and flow induced by manipulation of loading conditions. In the human study, VO(2)max correlated with Delta SPP (r = 0.78) better than Delta ejection fraction (r = 0.18) and Delta rate-pressure product (r = 0.59). CONCLUSIONS: The simple product of mean arterial pressure and peak aortic flow (simplified peak power, SPP) correlates with peak instantaneous power over a range of loading conditions in dogs. In humans, it can be estimated during exercise echocardiography, and correlates with maximum oxygen uptake better than ejection

  19. SU-E-T-146: Beam Energy Spread Estimate Based On Bragg Peak Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Anferov, V; Derenchuk, V; Moore, R [ProNova Solutions, Knoxville, TN (United States); Schreuder, A [Provision Healthcare Partners, Knoxville, TN (United States)

    2015-06-15

    Purpose: ProNova is installing and commissioning a two room proton therapy system in Knoxville, TN. Beam energy out of the 230MeV cyclotron was measured on Jan 24, 2015. Cyclotron beam was delivered into a Zebra multi layered IC detector calibrated in terms of penetration range in water. The analysis of the measured Bragg peak determines penetration range in water which can be subsequently converted into proton beam energy. We extended this analysis to obtain an estimate of the beam energy spread out of the cyclotron. Methods: Using Monte Carlo simulations we established the correlation between Bragg peak shape parameters (width at 50% and 80% dose levels, distal falloff) and penetration range for a monoenergetic proton beam. For large uniform field impinging on a small area detector, we observed linear dependence of each Bragg peak parameter on beam penetration range as shown in Figure A. Then we studied how this correlation changes when the shape of Bragg peak is distorted by the beam focusing conditions. As shown in Figure B, small field size or diverging beam cause Bragg peak deformation predominantly in the proximal region. The distal shape of the renormalized Bragg peaks stays nearly constant. This excludes usage of Bragg peak width parameters for energy spread estimates. Results: The measured Bragg peaks had an average distal falloff of 4.86mm, which corresponds to an effective range of 35.5cm for a monoenergetic beam. The 32.7cm measured penetration range is 2.8cm less. Passage of a 230MeV proton beam through a 2.8cm thick slab of water results in a ±0.56MeV energy spread. As a final check, we confirmed agreement between shapes of the measured Bragg peak and one generated by Monte-Carlo code for proton beam with 0.56 MeV energy spread. Conclusion: Proton beam energy spread can be estimated using Bragg peak analysis.

  20. Influence of heredity and environment on peak bone density: a review of studies in Croatia.

    Science.gov (United States)

    Cvijetić Avdagić, Selma; Colić Barić, Irena; Keser, Irena; Rumbak, Ivana; Šatalić, Zvonimir

    2012-01-01

    One of the main determinants of who will develop osteoporosis is the amount of bone accumulated at peak bone density. There is poor agreement, however, on when peak bone density occurs. Ethnic differences were observed in age at peak bone density and their correlates. Since the diagnosis of osteoporosis and osteopaenia is based on the comparison between patients' bone mineral density (BMD) and optimal peak bone density in healthy young people (T-score), it is of great importance that each country should provide its own reference peak bone density data.This review article presents our published results on peak bone density in Croatia and compares them with findings in other populations. Our research included 18 to 25-year-old students from Zagreb University and their parents. The results showed that peak bone mass in young Croatian women was achieved before the age of twenty, but BMD continued to increase after the mid-twenties in the long-bone cortical skeleton. BMD was comparable to the values reported by the National Health and Nutrition Examination Survey (NHANES) and other studies that included the same age groups, except for the cortical part of the radius, where it was significantly lower. Men achieved peak bone density in the spine later than women, which cannot be explained by different diet or physical activity. As expected, heredity was more important for peak bone density than the environmental factors known to be important for bone health. However, the influence of heredity was not as strong as observed in most other populations. It was also weaker in the cortical than in the trabecular parts of the skeleton. Future research should include young adolescent population to define the exact age of achieving peak bone density in different skeletal sites.

  1. Peak Exercise Oxygen Uptake Predicts Recurrent Admissions in Heart Failure With Preserved Ejection Fraction.

    Science.gov (United States)

    Palau, Patricia; Domínguez, Eloy; Núñez, Eduardo; Ramón, José María; López, Laura; Melero, Joana; Sanchis, Juan; Bellver, Alejandro; Santas, Enrique; Bayes-Genis, Antoni; Chorro, Francisco J; Núñez, Julio

    2017-06-27

    Heart failure with preserved ejection fraction (HFpEF) is a highly prevalent syndrome with an elevated risk of morbidity and mortality. To date, there is scarce evidence on the role of peak exercise oxygen uptake (peak VO2) for predicting the morbidity burden in HFpEF. We sought to evaluate the association between peak VO2 and the risk of recurrent hospitalizations in patients with HFpEF. A total of 74 stable symptomatic patients with HFpEF underwent a cardiopulmonary exercise test between June 2012 and May 2016. A negative binomial regression method was used to determine the association between the percentage of predicted peak VO2 (pp-peak VO2) and recurrent hospitalizations. Risk estimates are reported as incidence rate ratios. The mean age was 72.5 ± 9.1 years, 53% were women, and all patients were in New York Heart Association functional class II to III. Mean peak VO2 and median pp-peak VO2 were 10 ± 2.8mL/min/kg and 60% (range, 47-67), respectively. During a median follow-up of 276 days [interquartile range, 153-1231], 84 all-cause hospitalizations in 31 patients (41.9%) were registered. A total of 15 (20.3%) deaths were also recorded. On multivariate analysis, accounting for mortality as a terminal event, pp-peak VO2 was independently and linearly associated with the risk of recurrent admission. Thus, and modeled as continuous, a 10% decrease of pp-peak VO2 increased the risk of recurrent hospitalizations by 32% (IRR, 1.32; 95%CI, 1.03-1.68; P = .028). In symptomatic elderly patients with HFpEF, pp-peak VO2 predicts all-cause recurrent admission. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

  2. Estimation of cardiac reserve by peak power: validation and initial application of a simplified index

    Science.gov (United States)

    Armstrong, G. P.; Carlier, S. G.; Fukamachi, K.; Thomas, J. D.; Marwick, T. H.

    1999-01-01

    OBJECTIVES: To validate a simplified estimate of peak power (SPP) against true (invasively measured) peak instantaneous power (TPP), to assess the feasibility of measuring SPP during exercise and to correlate this with functional capacity. DESIGN: Development of a simplified method of measurement and observational study. SETTING: Tertiary referral centre for cardiothoracic disease. SUBJECTS: For validation of SPP with TPP, seven normal dogs and four dogs with dilated cardiomyopathy were studied. To assess feasibility and clinical significance in humans, 40 subjects were studied (26 patients; 14 normal controls). METHODS: In the animal validation study, TPP was derived from ascending aortic pressure and flow probe, and from Doppler measurements of flow. SPP, calculated using the different flow measures, was compared with peak instantaneous power under different loading conditions. For the assessment in humans, SPP was measured at rest and during maximum exercise. Peak aortic flow was measured with transthoracic continuous wave Doppler, and systolic and diastolic blood pressures were derived from brachial sphygmomanometry. The difference between exercise and rest simplified peak power (Delta SPP) was compared with maximum oxygen uptake (VO(2)max), measured from expired gas analysis. RESULTS: SPP estimates using peak flow measures correlated well with true peak instantaneous power (r = 0.89 to 0.97), despite marked changes in systemic pressure and flow induced by manipulation of loading conditions. In the human study, VO(2)max correlated with Delta SPP (r = 0.78) better than Delta ejection fraction (r = 0.18) and Delta rate-pressure product (r = 0.59). CONCLUSIONS: The simple product of mean arterial pressure and peak aortic flow (simplified peak power, SPP) correlates with peak instantaneous power over a range of loading conditions in dogs. In humans, it can be estimated during exercise echocardiography, and correlates with maximum oxygen uptake better than ejection

  3. The Gas Sampling Interval Effect on V˙O2peak Is Independent of Exercise Protocol.

    Science.gov (United States)

    Scheadler, Cory M; Garver, Matthew J; Hanson, Nicholas J

    2017-09-01

    There is a plethora of gas sampling intervals available during cardiopulmonary exercise testing to measure peak oxygen consumption (V˙O2peak). Different intervals can lead to altered V˙O2peak. Whether differences are affected by the exercise protocol or subject sample is not clear. The purpose of this investigation was to determine whether V˙O2peak differed because of the manipulation of sampling intervals and whether differences were independent of the protocol and subject sample. The first subject sample (24 ± 3 yr; V˙O2peak via 15-breath moving averages: 56.2 ± 6.8 mL·kg·min) completed the Bruce and the self-paced V˙O2max protocols. The second subject sample (21.9 ± 2.7 yr; V˙O2peak via 15-breath moving averages: 54.2 ± 8.0 mL·kg·min) completed the Bruce and the modified Astrand protocols. V˙O2peak was identified using five sampling intervals: 15-s block averages, 30-s block averages, 15-breath block averages, 15-breath moving averages, and 30-s block averages aligned to the end of exercise. Differences in V˙O2peak between intervals were determined using repeated-measures ANOVAs. The influence of subject sample on the sampling effect was determined using independent t-tests. There was a significant main effect of sampling interval on V˙O2peak (first sample Bruce and self-paced V˙O2max P V˙O2peak between sampling intervals followed a similar pattern for each protocol and subject sample, with 15-breath moving average presenting the highest V˙O2peak. The effect of manipulating gas sampling intervals on V˙O2peak appears to be protocol and sample independent. These findings highlight our recommendation that the clinical and scientific community request and report the sampling interval whenever metabolic data are presented. The standardization of reporting would assist in the comparison of V˙O2peak.

  4. Scaling of the Density Peak with Pellet Injection in ITER*%Scaling of the Density Peak with Pellet Injection in ITER*

    Institute of Scientific and Technical Information of China (English)

    P. KLAYWITTAPHAT; T. ONJUN

    2012-01-01

    Scalings of the density peak and pellet penetration length in ITER are developed based on simulations using 1.5D BALDUR integrated predictive modeling code. In these simulations , the pellet ablation is described by the Neutral Gas Shielding (NGS) model with grad-B drift effect taken into account. The NGS pellet model is coupled with a plasma core transport model, which is a combination of an MMM95 anomalous transport model and an NCLASS neoclassical transport model. The BALDUR code with a combination of MMM95 and NCLASS models, together with the NGS model, is used to simulate the time evolution of plasma current, ion and electron temperatures, and density profiles for ITER standard type I ELMy H-mode discharges during the pellet injection. As a result, the scaling of the density peak and pellet penetration length at peak density can be established using this set of predictive simulations that covers a wide range of ITER plasma conditions and pellet parameters. The multiple regression technique is utilized in the development of the scalings. It is found that the scaling for density at center is sensitive to both the plasma and pellet parameters; whereas the scalings for density and location of the additional peak are sensitive to the pellet parameters only.

  5. The Nature of Double-Peaked [O III] Active Galactic Nuclei

    CERN Document Server

    Fu, Hai; Myers, Adam D; Stockton, Alan; Djorgovski, S G; Aldering, G; Rich, Jeffrey A

    2011-01-01

    Active galactic nuclei (AGNs) with double-peaked [O III] lines are suspected to be sub-kpc or kpc-scale binary AGNs. However, pure gas kinematics can produce the same double-peaked line profile in spatially integrated spectra. Here we combine integral-field spectroscopy and high-resolution imaging of 42 double-peaked [O III] AGNs from Sloan Digital Sky Survey to investigate the constituents of the population. We find two binary AGNs where the line-splitting is driven by the orbital motion of the merging nuclei. Such objects account for only ~2% of the double-peaked AGNs. Almost all (~98%) of the double-peaked AGNs were selected because of gas kinematics; and half of those show spatially resolved narrow-line regions that extend 4-20 kpc from the nuclei. Serendipitously, we find two spectrally unresolved binary AGNs where gas kinematics produced the double-peaked [O III] lines. The relatively frequent serendipitous discoveries indicate that only ~1% of binary AGNs would appear double-peaked in Sloan spectra and...

  6. Prediction on the Peak of the CO2 Emissions in China Using the STIRPAT Model

    Directory of Open Access Journals (Sweden)

    Li Li

    2016-01-01

    Full Text Available Climate change has threatened our economic, environmental, and social sustainability seriously. The world has taken active measures in dealing with climate change to mitigate carbon emissions. Predicting the carbon emissions peak has become a global focus, as well as a leading target for China’s low carbon development. China has promised its carbon emissions will have peaked by around 2030, with the intention of peaking earlier. Scholars generally have studied the influencing factors of carbon emissions. However, research on carbon emissions peaks is not extensive. Therefore, by setting a low scenario, a middle scenario, and a high scenario, this paper predicts China’s carbon emissions peak from 2015 to 2035 based on the data from 1998 to 2014 using the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT model. The results show that in the low, middle, and high scenarios China will reach its carbon emissions peak in 2024, 2027, and 2030, respectively. Thus, this paper puts forward the large-scale application of technology innovation to improve energy efficiency and optimize energy structure and supply and demand. China should use industrial policy and human capital investment to stimulate the rapid development of low carbon industries and modern agriculture and service industries to help China to reach its carbon emissions peak by around 2030 or earlier.

  7. Localized auxin peaks in concentration-based transport models of the shoot apical meristem.

    Science.gov (United States)

    Draelants, Delphine; Avitabile, Daniele; Vanroose, Wim

    2015-05-06

    We study the formation of auxin peaks in a generic class of concentration-based auxin transport models, posed on static plant tissues. Using standard asymptotic analysis, we prove that, on bounded domains, auxin peaks are not formed via a Turing instability in the active transport parameter, but via simple corrections to the homogeneous steady state. When the active transport is small, the geometry of the tissue encodes the peaks' amplitude and location: peaks arise where cells have fewer neighbours, that is, at the boundary of the domain. We test our theory and perform numerical bifurcation analysis on two models that are known to generate auxin patterns for biologically plausible parameter values. In the same parameter regimes, we find that realistic tissues are capable of generating a multitude of stationary patterns, with a variable number of auxin peaks, that can be selected by different initial conditions or by quasi-static changes in the active transport parameter. The competition between active transport and production rate determines whether peaks remain localized or cover the entire domain. In particular, changes in the auxin production that are fast with respect to the cellular life cycle affect the auxin peak distribution, switching from localized spots to fully patterned states. We relate the occurrence of localized patterns to a snaking bifurcation structure, which is known to arise in a wide variety of nonlinear media, but has not yet been reported in plant models.

  8. Effects of urbanization on peak streamflows in four Connecticut communities, 1980-84

    Science.gov (United States)

    Weiss, L.A.

    1990-01-01

    Ratios of peak flows in urban basins to peak flows in rural basins in Connecticut are about 1.5 to 6.1 for the 2-year flood and 1.1 to 4.3 for the 100-year flood. The lower ratios, in each case, apply where 30% of the area is served by storm sewers, and the higher ratios apply where 90% of the area is served by storm sewers. Peak flows for six small urban streams were determined from rainfall and runoff data collected from 1981 to 1984 and from a distributed-routing rainfall-runoff model that simulated storm runoff for the period 1951-80. Recurrence intervals of the peak flows for these streams and three other urban streams were estimated using the log-Pearson Type III method and compared with peak flows for rural streams that were computed from regression equations. A comparison of the ratios of urban to rural peak flows shows that basins where more than 50% of the area is served by storm sewers have urban to rural ratios that are outside the 95% confidence limits of the rural regression equations. Peak flows for such areas can be adjusted graphically for the effects of urbanization if the streams drain less than 10 sq mi and manmade storage is less than 4.5 million cu ft/sq mi. (USGS)

  9. Local properties of the large-scale peaks of the CMB temperature

    Science.gov (United States)

    Marcos-Caballero, A.; Martínez-González, E.; Vielva, P.

    2017-05-01

    In the present work, we study the largest structures of the CMB temperature measured by Planck in terms of the most prominent peaks on the sky, which, in particular, are located in the southern galactic hemisphere. Besides these large-scale features, the well-known Cold Spot anomaly is included in the analysis. All these peaks would contribute significantly to some of the CMB large-scale anomalies, as the parity and hemispherical asymmetries, the dipole modulation, the alignment between the quadrupole and the octopole, or in the case of the Cold Spot, to the non-Gaussianity of the field. The analysis of the peaks is performed by using their multipolar profiles, which characterize the local shape of the peaks in terms of the discrete Fourier transform of the azimuthal angle. In order to quantify the local anisotropy of the peaks, the distribution of the phases of the multipolar profiles is studied by using the Rayleigh random walk methodology. Finally, a direct analysis of the 2-dimensional field around the peaks is performed in order to take into account the effect of the galactic mask. The results of the analysis conclude that, once the peak amplitude and its first and second order derivatives at the centre are conditioned, the rest of the field is compatible with the standard model. In particular, it is observed that the Cold Spot anomaly is caused by the large value of curvature at the centre.

  10. Decarbonization and the time-delay between peak CO2 emissions and concentrations

    CERN Document Server

    Seshadri, Ashwin K

    2015-01-01

    Carbon-dioxide (CO2) is the main contributor to anthropogenic global warming, and the timing of its peak concentration in the atmosphere is likely to govern the timing of maximum radiative forcing. While dynamics of atmospheric CO2 is governed by multiple time-constants, we idealize this by a single time-constant to consider some of the factors describing the time-delay between peaks in CO2 emissions and concentrations. This time-delay can be understood as the time required to bring CO2 emissions down from its peak to a small value, and is governed by the rate of decarbonizaton of economic activity. This decarbonization rate affects how rapidly emissions decline after having achieved their peak, and a rapid decline in emissions is essential for limiting peak radiative forcing. Long-term mitigation goals for CO2 should therefore consider not only the timing of peak emissions, but also the rate of decarbonization. We discuss implications for mitigation of the fact that the emissions peak corresponds to small bu...

  11. Unusual Double-peaked Emission in the SDSS Quasar J093201.60+031858.7

    CERN Document Server

    Barrows, R Scott; Kennefick, Daniel; Kennefick, Julia

    2010-01-01

    We examine spectral properties of the SDSS quasar J093201.60+031858.7, in particular the presence of strong blue peaks in the Balmer emission lines offset from the narrow lines by approximately 4200 km s$^{-1}$. Asymmetry in the broad central component of the H$\\beta$ line indicates the presence of a double-peaked emitter. However, the strength and sharpness of the blue H$\\beta$ and blue H$\\gamma$ peaks make this quasar spectrum unique amongst double-peaked emitters identified from SDSS spectra. We fit a disk model to the H$\\beta$ line and compare this object with other unusual double-peaked quasar spectra, particularly candidate binary supermassive black holes (SMBHs). Under the binary SMBH scenario, we test the applicability of a model in which a second SMBH may produce the strong blue peak in the Balmer lines of a double-peaked emitter. If there were only one SMBH, a circular, Keplerian disk model fit would be insufficient, indicating some sort of asymmetry is required to produce the strength of the blue p...

  12. Cold Thermal Storage and Peak Load Reduction for Office Buildings in Saudi Arabia

    Institute of Scientific and Technical Information of China (English)

    Nabil Y.Abdel-Shafi; Ramzy R.Obaid; Ibrahim M.Jomoah

    2014-01-01

    This paper involves the investigations of the chilled water and ice cold thermal storage technologies along with the associated operating strategies for the air conditioning (AC) systems of the typical office buildings in Saudi Arabia, so as to reduce the electricity energy consumption during the peak load periods. In Saudi Arabia, the extensive use of AC for indoor cooling in offices composes a large proportion of the annual peak electricity demand. The very high temperatures over long summer periods, extending from May to October, and the low cost of energy are the key factors in the wide and extensive use of air conditioners in the kingdom. This intense cooling load adds up to the requirement increase in the capacity of power plants, which makes them under utilized during the off-peak periods. Thermal energy storage techniques are one of the effective demand-side energy management methods. Systems with cold storage shifts all or part of the electricity requirement from peak hours to off-peak hours to reduce demand charges and/or take advantage of off-peak rates. The investigations reveal that the cold thermal energy storage techniques are effective from both technical and economic perspectives in the reduction of energy consumption in the buildings during peak periods.

  13. Active inductor shunt peaking in high-speed VCSEL driver design

    CERN Document Server

    Liang, Futian; Hou, Suen; Liu, Chonghan; Liu, Tiankuan; Su, Da-Shung; Teng, Ping-Kun; Xiang, Annie; Ye, Jingbo; Jin, Ge

    2013-01-01

    An all transistor active inductor shunt peaking structure has been used in a prototype of 8-Gbps high-speed VCSEL driver which is designed for the optical link in ATLAS liquid Argon calorimeter upgrade. The VCSEL driver is fabricated in a commercial 0.25-um Silicon-on-Sapphire (SoS) CMOS process for radiation tolerant purpose. The all transistor active inductor shunt peaking is used to overcome the bandwidth limitation from the CMOS process. The peaking structure has the same peaking effect as the passive one, but takes a small area, does not need linear resistors and can overcome the process variation by adjust the peaking strength via an external control. The design has been tapped out, and the prototype has been proofed by the preliminary electrical test results and bit error ratio test results. The driver achieves 8-Gbps data rate as simulated with the peaking. We present the all transistor active inductor shunt peaking structure, simulation and test results in this paper.

  14. ON THE ORIGIN OF STRESS PEAK IN UNI-AXIAL STRETCHING OF AMORPHOUS POLYMERS

    Institute of Scientific and Technical Information of China (English)

    QIAN Renyuan; SHEN Jingshu

    1997-01-01

    Rubber of high molar mass, like cis-polybutadiene, shows a stress peak on the engineering stress-strain curve during stretching at room temperature. In this work cispolybutadiene samples were swollen in a poor solvent, CHCla/EtOH (1/1 v/v), for different times. It was found that both the initial modulus and the stress peak on stretching decreased in magnitude with increasing swelling time and the peak disappeared entirely after1 hour of swelling. On further swelling the initial modulus increased somewhat and a small stress peak re-appeared after swelling for 2 h. The disappearance of the stress peak after swelling is interpreted as the result of disruption of cohesional entanglements present in the initial rubber sample. The re-appearance of a small stress peak and the increase of modulus on further swelling are interpreted as being of the same nature as the phenomenon of anti-plasticization. It is the result of forming some new cohesional entanglements of larger binding energies through longer range chain segmental motions excited after the disruption of the previously existing cohesional entanglements in the rubber. Thus an understanding of the stress peak on stretching a high molar mass rubber and the phenomenon of anti-plasticization on molecular level has been put forward.

  15. The influence of cricket fast bowlers' front leg technique on peak ground reaction forces.

    Science.gov (United States)

    Worthington, Peter; King, Mark; Ranson, Craig

    2013-01-01

    High ground reaction forces during the front foot contact phase of the bowling action are believed to be a major contributor to the high prevalence of lumbar stress fractures in fast bowlers. This study aimed to investigate the influence of front leg technique on peak ground reaction forces during the delivery stride. Three-dimensional kinematic data and ground reaction forces during the front foot contact phase were captured for 20 elite male fast bowlers. Eight kinematic parameters were determined for each performance, describing run-up speed and front leg technique, in addition to peak force and time to peak force in the vertical and horizontal directions. There were substantial variations between bowlers in both peak forces (vertical 6.7 ± 1.4 body weights; horizontal (braking) 4.5 ± 0.8 body weights) and times to peak force (vertical 0.03 ± 0.01 s; horizontal 0.03 ± 0.01 s). These differences were found to be linked to the orientation of the front leg at the instant of front foot contact. In particular, a larger plant angle and a heel strike technique were associated with lower peak forces and longer times to peak force during the front foot contact phase, which may help reduce the likelihood of lower back injuries.

  16. A Framework for Understanding and Generating Integrated Solutions for Residential Peak Energy Demand

    Science.gov (United States)

    Buys, Laurie; Vine, Desley; Ledwich, Gerard; Bell, John; Mengersen, Kerrie; Morris, Peter; Lewis, Jim

    2015-01-01

    Supplying peak energy demand in a cost effective, reliable manner is a critical focus for utilities internationally. Successfully addressing peak energy concerns requires understanding of all the factors that affect electricity demand especially at peak times. This paper is based on past attempts of proposing models designed to aid our understanding of the influences on residential peak energy demand in a systematic and comprehensive way. Our model has been developed through a group model building process as a systems framework of the problem situation to model the complexity within and between systems and indicate how changes in one element might flow on to others. It is comprised of themes (social, technical and change management options) networked together in a way that captures their influence and association with each other and also their influence, association and impact on appliance usage and residential peak energy demand. The real value of the model is in creating awareness, understanding and insight into the complexity of residential peak energy demand and in working with this complexity to identify and integrate the social, technical and change management option themes and their impact on appliance usage and residential energy demand at peak times. PMID:25807384

  17. Feature Selection and Classifier Parameters Estimation for EEG Signals Peak Detection Using Particle Swarm Optimization

    Directory of Open Access Journals (Sweden)

    Asrul Adam

    2014-01-01

    Full Text Available Electroencephalogram (EEG signal peak detection is widely used in clinical applications. The peak point can be detected using several approaches, including time, frequency, time-frequency, and nonlinear domains depending on various peak features from several models. However, there is no study that provides the importance of every peak feature in contributing to a good and generalized model. In this study, feature selection and classifier parameters estimation based on particle swarm optimization (PSO are proposed as a framework for peak detection on EEG signals in time domain analysis. Two versions of PSO are used in the study: (1 standard PSO and (2 random asynchronous particle swarm optimization (RA-PSO. The proposed framework tries to find the best combination of all the available features that offers good peak detection and a high classification rate from the results in the conducted experiments. The evaluation results indicate that the accuracy of the peak detection can be improved up to 99.90% and 98.59% for training and testing, respectively, as compared to the framework without feature selection adaptation. Additionally, the proposed framework based on RA-PSO offers a better and reliable classification rate as compared to standard PSO as it produces low variance model.

  18. Compositional heterogeneity of central peaks within the South Pole-Aitken Basin

    Science.gov (United States)

    Moriarty, D. P.; Pieters, C. M.; Isaacson, P. J.

    2013-11-01

    high-spectral and -spatial resolution Moon Mineralogy Mapper data, we investigate compositional variations across the central peak structures of four impact craters within the South Pole-Aitken Basin (SPA). Two distinct causes of spectral diversity are observed. Spectral variations across the central peaks of Bhabha, Finsen, and Lyman are dominated by soil development, including the effects of space weathering and mixing with local materials. For these craters, the central peak structure is homogeneous in composition, although small compositional differences between the craters are observed. This group of craters is located within the estimated transient cavity of SPA, and their central uplifts exhibit similar mafic abundances. Therefore, it is plausible that they have all uplifted material associated with melts of the lower crust or upper mantle produced during the SPA impact. Compositional differences observed between the peaks of these craters reflect heterogeneities in the SPA subsurface, although the origin of this heterogeneity is uncertain. In contrast to these craters, Leeuwenhoek exhibits compositional heterogeneity across its central peak structure. The peak is areally dominated by feldspathic materials, interspersed with several smaller exposures exhibiting a mafic spectral signature. Leeuwenhoek is the largest crater included in the study and is located in a region of complex stratigraphy involving both crustal (feldspathic) and SPA (mafic melt and ejecta) materials. The compositional diversity observed in Leeuwenhoek's central peak indicates that kilometer-scale heterogeneities persist to depths of more than 10 km in this region.

  19. Effects of muscle electrical stimulation on peak VO2 in cardiac transplant patients.

    Science.gov (United States)

    Vaquero, A F; Chicharro, J L; Gil, L; Ruiz, M P; Sánchez, V; Lucía, A; Urrea, S; Gómez, M A

    1998-07-01

    Peak oxygen consumption (peak VO2) has become a critical component in the evaluation of heart transplant recipients (HTR). In these patients, peak VO2 remains low after cardiac transplantation mainly because of persisting peripheral limitations in the working muscles. Muscular electrical stimulation, on the other hand, has been shown to enhance the oxidative capacity of healthy muscle. It was the purpose of our investigation to study the effects of ES on the peak VO2 of HTR. Fourteen (11 males and 3 females) HTR (age: 57+/-7yr, mean +/- SD; height: 163+/-7 cm, weight: 70.5+/-8.6 kg) were selected as subjects and each of them was randomly assigned to one of two groups: (a) group EXP (n = 7), receiving electrical stimulation on both quadriceps muscles during a period of 8 weeks, and (b) group CONT (n = 7), not receiving electrical stimulation. Before (PRE) and after (POST) the aforementioned 8-week period, respectively, all the subjects performed a cardiopulmonary exercise test (ramp protocol) on a cycle ergometer for peak VO2 determination. PRE values of peak VO2 were similar in both groups (17.1+/-2.0 vs 16.9+/-3.8ml x kg(-1) x min(-1) in EXP and CONT, respectively). However, peak values of VO2 significantly increased in EXP (p < 0.05) after the period of electrical stimulation (POST peak VO2: 18.7+/-2.0ml x kg(-1)), whereas no change was observed in CONT (POST peak VO2: 16.2+/-3.2 ml x kg(-1) x min(-1)). In conclusion, electrical stimulation could therefore be used to improve the functional capacity of HTR, and might be included in the rehabilitation programs of this population group.

  20. Joint modelling of flood peaks and volumes: A copula application for the Danube River

    Directory of Open Access Journals (Sweden)

    Papaioannou George

    2016-12-01

    Full Text Available Flood frequency analysis is usually performed as a univariate analysis of flood peaks using a suitable theoretical probability distribution of the annual maximum flood peaks or peak over threshold values. However, other flood attributes, such as flood volume and duration, are necessary for the design of hydrotechnical projects, too. In this study, the suitability of various copula families for a bivariate analysis of peak discharges and flood volumes has been tested. Streamflow data from selected gauging stations along the whole Danube River have been used. Kendall’s rank correlation coefficient (tau quantifies the dependence between flood peak discharge and flood volume settings. The methodology is applied to two different data samples: 1 annual maximum flood (AMF peaks combined with annual maximum flow volumes of fixed durations at 5, 10, 15, 20, 25, 30 and 60 days, respectively (which can be regarded as a regime analysis of the dependence between the extremes of both variables in a given year, and 2 annual maximum flood (AMF peaks with corresponding flood volumes (which is a typical choice for engineering studies. The bivariate modelling of the extracted peak discharge - flood volume couples is achieved with the use of the Ali-Mikhail-Haq (AMH, Clayton, Frank, Joe, Gumbel, Hüsler-Reiss, Galambos, Tawn, Normal, Plackett and FGM copula families. Scatterplots of the observed and simulated peak discharge - flood volume pairs and goodness-of-fit tests have been used to assess the overall applicability of the copulas as well as observing any changes in suitable models along the Danube River. The results indicate that for the second data sampling method, almost all of the considered Archimedean class copula families perform better than the other copula families selected for this study, and that for the first method, only the upper-tail-flat copulas excel (except for the AMH copula due to its inability to model stronger relationships.