In vitro study of effectiveness of saponin from Sapindus rarak fruit as methanogenesis inhibitor on ruminal digestion system

Directory of Open Access Journals (Sweden)

Amlius Thalib

2004-10-01

Full Text Available Methane produced in the rumen system causes the lost of ingested chemical energy, and the methane emitted contributes the greenhouse effect to the atmosphere environment. A study to evaluate the effectiveness of saponin from Sapindus rarak fruit as an inhibitor of ruminal methanogenesis was conducted. The method conducted in this study was a fermentation of a substrate by in vitro technique using rumen fluid (obtained from fistulated sheep as inoculum. Substrate (king grass was fermented in anaerobic incubator system at pH of medium 6.9 and temperature of 39°C for 48 hours. Inoculum was supplemented with an ingredient obtained by extraction of Sapindus rarak fruit with methanol (Aksapon SR and the ones without extraction (lerak powder, and further, these treatments were compared to other methanogenesis inhibitors (i.e. Fe3+, SO4 2– and poly unsaturated longchain fatty acids: PULCFA.The treatments were 1. Inoculum without treatment (K; 2. K + Aksapon SR (80 mg/100 ml; 3. K + lerak powder (160 mg/100 ml; 4. K + Fe3+ (0.8 mg/100 ml; 5. K + SO4 2- (96 mg/100 ml; 6. K + PULCFA (24 mg/100 ml. Measurements conducted were portion of methane, dry matter digestibility (DMD, NH3-N content, microbial population, and volatile fatty acids (VFA. The data measured were analyzed by using completely randomized design. The results of the experiment showed that Aksapon SR was the most effective inhibitor of methanogenesis compared to the others, that is when compared to control, Aksapon SR lowered methane production by 31% (P0.05 and SO4 2–(10% (P>0.05. All additive treatments did not affect the DMD value of the substrate fermented by control inoculum. Compared to control, all treatments lowered the protozoal population where the Aksapon SR gave the strongest effect (1.91 x 105 vs 9.94 x 105 cell/ml, and the decrease of protozoal number in Aksapon SR treatment was followed by the increase of bacterial (4.13 x 109 vs 2.56 x 109 colony/ml. Aksapon SR and SO4 2

Estudo fitoquímico e alelopático do extrato de caule de sucupira-branca (Pterodon emarginatus Phytochemistry and allelophatic study of Pterodon emarginatus stem extract

Directory of Open Access Journals (Sweden)

M.G. Hernández-Terrones

2007-12-01

Full Text Available A alelopatia é um dos fenômenos pouco estudados no Cerrado. Trata-se de uma ocorrência natural, resultante da liberação de substâncias capazes de estimular ou inibir o desenvolvimento de outras plantas. Objetivou-se neste trabalho avaliar a ação alelopática de extratos da sucupira-branca (Pterodon emarginatus sobre a germinação e o desenvolvimento da raiz e parte aérea do capim-colonião (Panicum maximum. Bioensaios de germinação realizados em placas de Petri comprovaram que o extrato metanólico do tronco dessa planta, a 150 ppm, inibiu 83% do desenvolvimento da raiz, 75% da parte aérea e 30% da germinação de sementes de capim-colonião. Em casa de vegetação, os resultados de inibição foram de 83% para a parte aérea, 80% para a raiz e 63% para a germinação, mas somente na concentração de 400 ppm. Frações do extrato metanólico bruto obtidas por cromatografia de coluna cromatográfica não reproduziram os resultados de inibição obtidos inicialmente. A fração mais ativa (diclorometano/clorofórmio foi analisada por CG/EM. Ela é constituída fundamentalmente por substâncias alifáticas de cadeia longa: fitol (13,5%, ácido oléico (12,8%, linoleiladato de metila (10,9% e ácido palmítico (6,9%. Foram detectados, também, os compostos 1,2,4-trimetil e isopropilbenzenos (12,2% e as cetonas isoméricas isopropenilmetilcetona e 3-penten-2-ona (7,3%. Três compostos desconhecidos também se destacaram: um de baixa massa molar (98 Da, 13,5% e dois de massa molar elevada (13,6%.Allelopathy is one of the natural phenomena little studied in the cerrado. It is the result of the release of substances capable of stimulating or inhibiting the growth of other plants. The objective of this work was to evaluate the allelophatic action of the white sucupira (Pterodon emarginatus stem extract on the germination and development of colonião grass (Panicum maximum under germination, root and aerial part development of coloni

Protective action of a hexane crude extract of Pterodon emarginatus fruits against oxidative and nitrosative stress induced by acute exercise in rats

Directory of Open Access Journals (Sweden)

Alfredo Patrícia P

2005-08-01

Full Text Available Abstract Background The aim of the present work was to evaluate the effect of a hexane crude extract (HCE of Pterodon emarginatus on the oxidative and nitrosative stress induced in skeletal muscle, liver and brain of acutely exercised rats. Methods Adult male rats were subjected to acute exercise by standardized contractions of the tibialis anterior (TA muscle (100 Hz, 15 min and treated orally with the HCE (once or three times with a fixed dose of 498 mg/kg, before and after acute exercise. Serum creatine kinase activity was determined by a kinetic method and macrophage infiltration by histological analyses of TA muscle. Lipid peroxidation was measured as malondialdehyde (MDA levels. Nitric oxide production was evaluated by measuring nitrite formation, using Griess reagent, and nitrotyrosine was assessed by western blotting. Results Serum creatine kinase activities in the controls (111 U/L increased 1 h after acute exercise (443 U/L. Acute exercise also increased the infiltration of macrophages into TA muscle; lipid peroxidation levels in TA muscle (967%, liver (55.5% and brain (108.9%, as well as the nitrite levels by 90.5%, 30.7% and 60%, respectively. The pattern of nitrotyrosine formation was also affected by acute exercise. Treatment with HCE decreased macrophage infiltration, lipid peroxidation, nitrite production and nitrotyrosine levels to control values. Conclusion Acute exercise induced by functional electrical stimulation in rats resulted in increase in lipid peroxidation, nitrite and nitrotyrosine levels in brain, liver and skeletal muscle. The exercise protocol, that involved eccentric muscle contraction, also caused some muscle trauma, associated with over-exertion, leading to inflammation. The extract of P. emarginatus abolished most of these oxidative processes, thus confirming the high antioxidant activity of this oil which infusions are used in folk medicine against inflammatory processes.

EFEK SENYAWA SAPONIN PADA SAPINDUS RARAK DENGAN PAKAN BERBASIS JERAMI PADI DALAM MITIGASI GAS METANA

Directory of Open Access Journals (Sweden)

Nanang Krisnawan

2015-12-01

Full Text Available The objective of the research was to study saponin in Sapindus rarak were added to the diet of rice straw ammoniation (20 & 40%, related to the effect in reducing methane emissions of ruminants and pattern of rumen fermentation were tested by in vitro. Completly randomized block design with four treatments and four replications was used. Variables measured were gas production total, methane production, dray matter digestibility (DMD, N-ammonia, VFA total, VFA partial, and population of protozoa. The results showed that the addition saponins in S. rarak as a source of rice straw ammoniation significant effect (P<0.05 of the total gas production, methane production, dray matter digestibility (DMD, N-ammonia, VFA partial, and population of protozoa. S. rarak use as a source of saponins with a dose of 20% on rice straw ammoniation was able to reduce methane gas production drop in gas production total, concentration of N-ammonia, and protozoa population.

Rhizosphere bacteriome of the medicinal plant Sapindus saponaria L. revealed by pyrosequencing.

Science.gov (United States)

Garcia, A; Polonio, J C; Polli, A D; Santos, C M; Rhoden, S A; Quecine, M C; Azevedo, J L; Pamphile, J A

2016-11-03

Sapindus saponaria L. of Sapindaceae family is popularly known as soldier soap and is found in Central and South America. A study of such medicinal plants might reveal a more complex diversity of microorganisms as compared to non-medicinal plants, considering their metabolic potential and the chemical communication between their natural microbiota. Rhizosphere is a highly diverse microbial habitat with respect to both the diversity of species and the size of the community. Rhizosphere bacteriome associated with medicinal plant S. saponaria is still poorly known. The objective of this study was to assess the rhizosphere microbiome of the medicinal plant S. saponaria using pyrosequencing, a culture-independent approach that is increasingly being used to estimate the number of bacterial species present in different environments. In their rhizosphere microbiome, 26 phyla were identified from 5089 sequences of 16S rRNA gene, with a predominance of Actinobacteria (33.54%), Acidobacteria (22.62%), and Proteobacteria (24.72%). The rarefaction curve showed a linear increase, with 2660 operational taxonomic units at 3% distance sequence dissimilarity, indicating that the rhizosphere microbiome associated with S. saponaria was highly diverse with groups of bacteria important for soil management, which could be further exploited for agricultural and biotechnological purposes.

Silvicultural study of Sapindus saponaria L. (Jaboncillo), as foundation for its silvo-industrial use

International Nuclear Information System (INIS)

Sanchez Buitrago Jose Alejandro; Silva Herrera Luis Jairo

2008-01-01

A silvicultural study of Sapindus saponaria L. was carried out including sexual and asexual propagation tests, provenance test, phenological surveillance, and quantification of fruits production. The sexual propagation test was carried out using five source localities, being the best those seeds from Santa Cruz (Bolivia). The asexual propagation test had a negative result because the cuttings did not root, making it necessary to try different methods for asexual reproduction. The seedlings obtained from the sexual propagation test were used to establish a plantation in Otanche (Boyaca) in order to evaluate growth and mortality. After five months, the highest growth was found in those seeds from Santa Cruz (Bolivia). However, this result was not significant from a statistical point of view. The best results regarding mortality came from the seeds from Viota (Cundinamarca), while those from Palmira (Valle) showed the highest levels of mortality. Fruit production was measured and related to the DBH and the canopy wide. Flowering and fruiting periods as well as the harvest season of the fruits in Viota (Cundinamarca) were established. Some methods for fruit harvesting and planting of the species are proposed.

Effect of Sapindus trifoliatus on hyperalgesic in vivo migraine models

Directory of Open Access Journals (Sweden)

D.K. Arulmozhi

2005-03-01

Full Text Available Phytotherapies have offered alternative sources of therapy for migraine and gained much importance in prophylactic treatment. Sapindus trifoliatus is a medium-sized deciduous tree growing wild in south India that belongs to the family Sapindaceae. The pericarp is reported for various medicinal properties. A thick aqueous solution of the pericarp is used for the treatment of hemicrania, hysteria or epilepsy in folklore medicine. We have investigated the antihyperalgesic effects of the lyophilized aqueous extract of S. trifoliatus in animal models predictive of experimental migraine models using morphine withdrawal-induced hyperalgesia on the hot-plate test and on 0.3% acetic acid-induced abdominal constrictions in adult male Swiss albino mice. The extract significantly (N = 10, P < 0.05 increased the licking latency in the hot-plate test when administered ip at 10 mg/kg (6.70 ± 0.39 s in saline control vs 18.76 ± 0.96 s in S. trifoliatus-treated animals and significantly (N = 10, P < 0.001 reduced the abdominal constrictions when administered ip at 2 and 10 mg/kg (40.20 ± 1.36 in saline control vs 30.20 ± 1.33 and 23.00 ± 0.98 for 2 and 10 mg/kg, ip, respectively, in S. trifoliatus-treated animals. Furthermore, when administered ip at 20 and 100 mg/kg, the extract significantly (N = 10, P < 0.05 inhibited the apomorphine-induced climbing behavior in mice (climbing duration 15.75 ± 5.0 min for saline control vs 11.4 ± 1.28 and 3.9 ± 1.71 min for 20 and 100 mg/kg, respectively, in S. trifoliatus-treated animals. In receptor radioligand-binding studies, the extract exhibited affinity towards D2 receptors. The findings suggest that dopamine D2 antagonism could be the mechanism involved in the antihyperalgesic activity of the aqueous extract of S. trifoliatus.

[Investigation on the process of sapindus saponin purified with macroporous adsorption resin and screening of its bacteriostasis].

Science.gov (United States)

Fu, Yong; Lei, Peng; Han, Yu-mei; Yan, Dan

2010-02-01

To study the technological parameters of the purification process of saponins with macroporous adsorption resin. The adsorptive characteristics and elutive parameters of the process were studied by taking the elutive and purified ratio of saponins as markers. Bacteriostasis activity of each parts eluted was evaluated by the mean of cup-plate method. 13.6 mL of the extraction of sapindus saponin (crude drugs 0.01 g/mL) was purified with a column of macroporous adsorption resin (phi15 mm x H90 mm, dry weight 2.5 g) and washed with 3BV of distilled water, then eluted with 3BV of 30% ethanol and 3BV of 70% ethanol, most of saponins were collected in the 70% ethanol. With macroporous adsorption resin adsorbing and purifying, the elutive ratio of saponins was 93.8% and the purity reached 250.1%. So this process of applying macroporous adsorption resin to adsorb and purify saponins is feasible, and supplies reference to the purification of other types of saponin.

Phytotoxic activity of crude aqueous extracts and fractions of young leaves of Sapindus saponaria L. (Sapindaceae

Directory of Open Access Journals (Sweden)

Patrícia Umeda Grisi

2013-03-01

Full Text Available The aim of this study was to evaluate the phytotoxic potential of aqueous extract of young leaves of Sapindus saponaria L. (soapberry on the diaspore germination and seedling growth Lactuca sativa L. (lettuce and Allium cepa L. (onion, as well as to determine, by bioassay-guided fractioning, whether the fractionated extracts of those leaves are phytotoxic to Triticum aestivum L. (wheat coleoptiles. The aqueous extract was prepared using 100 g of dried plant material dissolved in 1000 ml of distilled water, resulting in a concentration of 10.0%. Distilled water was added in order to obtain dilutions of 7.5%, 5.0%, and 2.5%. The extraction was carried out with young leaves (in powder form and organic solvents of various polarities. We fractioned the ethyl acetate extract using column chromatography. The phytotoxic potential of the aqueous extract of young leaves S. saponaria varied according to the receiving species and the concentration-dependent inhibitory effect. The ethyl acetate extract, specifically fraction 6 (57-70, had the greatest inhibitory effect on the elongation of wheat coleoptiles, indicating that the compounds responsible for the phytotoxic effect reside within this fraction.

Germinação e vigor de sementes de Sapindus saponaria L. submetidas a tratamentos pré-germinativos, temperaturas e substratos Germination and vigor of Sapindus saponaria L. seeds submitted pre-germinative treatments, temperatures and substrates

Directory of Open Access Journals (Sweden)

Lucicléia Mendes de Oliveira

2012-04-01

Full Text Available Sapindus saponaria L. é uma árvore de grande porte distribuída especialmente na região Amazônica, sendo de grande importância para o reflorestamento de áreas degradadas, na construção civil e confecção de brinquedos. O objetivo dessa pesquisa foi testar tratamentos pré-germinativos para superar a dormência e avaliar o efeito da temperatura e do substrato na germinação das sementes de S. saponaria. O experimento foi conduzido em ambiente protegido e no Laboratório de Análise de Sementes (LAS da Universidade Federal da Paraíba. Dois ensaios foram desenvolvidos, sendo no primeiro testados os seguintes tratamentos: imersão das sementes em ácido sulfúrico (H2SO4 por 0, 15, 30, 45 e 60 minutos, analisando-se as variáveis: emergência e índice de velocidade de emergência, comprimento e massa seca de plântulas. No segundo ensaio foi avaliado o efeito das temperaturas (25, 20-30, 30 e 35°C e substratos (areia, vermiculita e pó-de-coco na germinação e no vigor das sementes. Pelos resultados constata-se que a imersão das sementes de S. saponaria em ácido sulfúrico por 60 minutos é suficiente para superar a dormência acelerando e uniformizando a emergência das plântulas. A melhor condição para executar o teste de germinação é empregando temperatura constante de 30°C ou alternada de 20-30°C em substrato vermiculita ou apenas 30°C combinado com o substrato areia.Sapindus saponaria L. is a large tree distributed especially in the Amazon region is of great importance for the reforestation of degraded areas, construction and manufacture of toys. The aim of this study was to test pre-germination treatments to overcome dormancy and to evaluate the effect of temperature and substrate on seed germination of S. saponaria. The experiment was conducted in a protected ambient and the Seed Analysis Laboratory (SAL, Universidade Federal da Paraíba. Two tests were developed, and tested first in the following treatments: seeds

Candida albicans PROTEIN PROFILE CHANGES IN RESPONSE TO THE BUTANOLIC EXTRACT OF Sapindus saponariaL.

Directory of Open Access Journals (Sweden)

Adriana FIORINI

2016-01-01

Full Text Available Candida albicans is an opportunistic human pathogen that is capable of causing superficial and systemic infections in immunocompromised patients. Extracts of Sapindus saponaria have been used as antimicrobial agents against various organisms. In the present study, we used a combination of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS to identify the changes in protein abundance of C. albicans after exposure to the minimal inhibitory concentration (MIC and sub-minimal inhibitory concentration (sub-MIC of the butanolic extract (BUTE of S. saponaria and also to fluconazole. A total of six different proteins with greater than 1.5 fold induction or repression relative to the untreated control cells were identified among the three treatments. In general, proteins/enzymes involved with the glycolysis (GPM1, ENO1, FBA1, amino acid metabolism (ILV5, PDC11 and protein synthesis (ASC1 pathways were detected. In conclusion, our findings reveal antifungal-induced changes in protein abundance of C. albicans. By using the previously identified components of the BUTE of S. saponaria(e.g., saponins and sesquiterpene oligoglycosides, it will be possible to compare the behavior of compounds with unknown mechanisms of action, and this knowledge will help to focus the subsequent biochemical work aimed at defining the effects of these compounds.

Application of colloidal gas aphron suspensions produced from Sapindus mukorossi for arsenic removal from contaminated soil.

Science.gov (United States)

Mukhopadhyay, Soumyadeep; Mukherjee, Sumona; Hashim, Mohd Ali; Sen Gupta, Bhaskar

2015-01-01

Colloidal gas aphron dispersions (CGAs) can be described as a system of microbubbles suspended homogenously in a liquid matrix. This work examines the performance of CGAs in comparison to surfactant solutions for washing low levels of arsenic from an iron rich soil. Sodium Dodecyl Sulfate (SDS) and saponin, a biodegradable surfactant, obtained from Sapindus mukorossi or soapnut fruit were used for generating CGAs and solutions for soil washing. Column washing experiments were performed in down-flow and up flow modes at a soil pH of 5 and 6 using varying concentration of SDS and soapnut solutions as well as CGAs. Soapnut CGAs removed more than 70% arsenic while SDS CGAs removed up to 55% arsenic from the soil columns in the soil pH range of 5-6. CGAs and solutions showed comparable performances in all the cases. CGAs were more economical since it contains 35% of air by volume, thereby requiring less surfactant. Micellar solubilization and low pH of soapnut facilitated arsenic desorption from soil column. FT-IR analysis of effluent suggested that soapnut solution did not interact chemically with arsenic thereby facilitating the recovery of soapnut solution by precipitating the arsenic. Damage to soil was minimal arsenic confirmed by metal dissolution from soil surface and SEM micrograph. Copyright © 2014 Elsevier Ltd. All rights reserved.

Intoxicação espontânea por Pterodon emarginatus (Fabaceae em bovinos no estado de Goiás

Directory of Open Access Journals (Sweden)

Fabiano J.F. de Sant'Ana

2012-06-01

Full Text Available Descreve-se um surto de intoxicação por Pterodon emarginatus em bovinos no Estado de Goiás. De um lote de 84 bovinos que comeram avidamente folhas e os frutos da planta após a queda acidental de uma árvore, todos os animais adoeceram e sete morreram. Os sinais clínicos observados foram eriçamento dos pelos, retração do flanco, apatia profunda, prostração, tremores musculares, ressecamento do focinho, tenesmo, incoordenação, relutância em movimentar-se e decúbito esternal prolongado. As atividades séricas de AST, ALT e GGT e os teores de bilirrubina estavam acentuadamente elevados. As principais alterações macroscópicas consistiam de hepatomegalia e áreas multifocais de necrose no fígado, além de hemorragias no coração, pleura parietal, mesentério, omento, serosa do rúmen, baço, pulmão, subcutâneo e musculatura esquelética intercostal e torácica. Microscopicamente, observou-se degeneração e necrose hepatocelular massiva moderada a acentuada, hiperplasia biliar multifocal moderada e bilestase multifocal leve. Adicionalmente, notou-se degeneração vacuolar multifocal moderada nos túbulos contorcidos dos rins.

Researches on the Surface Activity of Sapindus Saponin Product and Its Mixed System%无患子皂苷及复配体系表面活性的研究

Institute of Scientific and Technical Information of China (English)

伍恒; 王娜; 翁震; 徐德平; 汪何雅; 姚卫蓉

2013-01-01

In this paper, the surfactivity of the water extraction of Sapindus saponin from the pericarp of Sapindus mukorossi, its fermentation product, and the mixture of the fermentation product and other four surfactants was studied. The results showed that, compared with those of the water extract, the high-temperature stability, lower critical micelle concentration ( CMC ) and surface tension ( γCMC ) , and foaming and emulsifying capability of the fermentation product were impoved in different degrees, respectively. Based on Rosen theory,the binary mixture systems containing the fermentation product of Sapindus saponin and one of the follwing surfactants, Sodium alcohol ether sulphate ( AES ) , Octadearyl dimethyl ammonium chloride (1831) ,Alkyl polyglycoside ( APG) ,or Pepega, were constructed, and then their surfactivity was determined. According to the CMC,γCMC and foaming ability tests, they showed synergistic effects in different degrees. In emulsifying ability test, a remarkable synergistic effect exsited in the mixture of the fermentation product/APG on both palm oil and liquid paraffin, while the other three mixtures had synergistic effects only on palm oil, not on liquid paraffin.%该文系统地研究了无患子皂苷水提液及其发酵液以及与其他表面活性剂复配体系的表面活性.结果显示,经发酵纯化后的无患子皂苷的高温稳定性、临界胶束质量浓度(CMC)、临界胶束质量浓度时的表面张力(γCMC)、泡沫性能及乳化力都有不同程度的改善；根据Rosen理论推算出无患子皂苷发酵液与脂肪醇聚氧乙烯醚硫酸钠(AES)、十八烷基三甲基氯化铵(1831)、烷基聚葡萄糖苷(APG)、脂肪醇聚氧乙烯醚(平平加)进行二元复配的最佳配比.γCMC、CMC及泡沫实验测试结果表明,无患子皂苷发酵液与这4种表面活性剂组成的二元复配体系都有不同程度的协同增效效应；乳化力测试结果显示,无患�

Study and development of three jaboncillo (Sapindus saponaria L.) products as grounding in its industrialisation

International Nuclear Information System (INIS)

Flechas, Henry; Arango, Camilo; Morales, Nelly B; Jimenez, Jhon

2009-01-01

This research included the chemical and phyto chemical studies and the industrial scaling in pilot plant of three products of Sapindus saponaria, commonly known as jaboncillo, Michu. This work is part of an interdisciplinary research project aimed at the exploitation and commercialization of its harvested products: oil, gum, and triterpenoidal sapogenins. These three products were obtained through physical and chemical processes both in laboratory (phase 1) and in the industrial scaling stage (phase 2). During the laboratory stage different methods of extraction and purification were studied and assessed, along with the corresponding methods of chemical analysis for the three origins (Palmira, Valle; Viota, Cundinamarca, and Santa Maria, Huila). Based on laboratory studies, extraction and purification processes were designed in a pilot plant supplied by the QUINACOL Ltda. company, whose business is the production, research and development of products for the phyto pharmaceutical industry. Developed products were characterized by methods of instrumental analysis of nuclear magnetic resonance (1H NMR and 13C), flame ionization detector gas chromatography (GC), infrared spectroscopy (IR) and specific chemical analysis techniques designed for these products. The mature fruit of Santa Maria presented increased performance of oil and rubber; as well as the green fruit of Viota, in a substance called Ss1, possibly hederagenina. Of the products obtained in the pilot phase, oil presented a high percentage of unsaturated fatty acids and rubber showed a high thickening capacity in aqueous solutions. Oil and rubber could be marketed from this species' fruit, because its composition and characteristics, as well as its performance, meets the main parameters of marketing, for which studies on industrial perfectibility are needed.

Performa dan Profil Beberapa Komponen Darah Sapi Peranakan Ongole yang Diberi Pakan Mengandung Lerak (Sapindus rarak De Candole

Directory of Open Access Journals (Sweden)

S. Suharti

2009-04-01

Full Text Available The problem with low meat production is caused by several factors, ie: management, feed and animal health. The development of integration system such as cattle-rice, cattle-corn and cattle-palm oil aims to utilize feed from local resources. However, sometimes local feedstuff causes a problem of imbalance nutrient. There are several strategies to overcome this problem and one of them is the use of feed additives from natural substance or plant resources such as lerak (Sapindus rarak De Candole. This research was aimed to utilize lerak fruit to improve performance and evaluate some blood profiles of Ongole crossbred cattle. The in vivo work was done using 12 Ongole crossbred cattle receiving 3 different feeds as treatment, i.e. 1 feed without lerak (high roughage diet as control, 2 feed contained 2,5% lerak, and 3 feed contained 5% lerak. Growth, daily gain, blood profiles (leucocytes, cholesterol, trigliceride and globulins were observed. The results showed no significant differences for nutrient intake, meaning that the ration has good palatability. Average daily gain of cattle fed with 2,5% lerak was 20% higher than those with control diet. White blood cells tended to decrease caused by lerak treatments, but the globulin profiles (alpha, beta and gamma were not significantly affected in all treatments. Blood cholesterol concentration decreased following the increase of lerak percentage. It is not recommended to use lerak in the cattle ration for more than two months because of the decreasing of leucocytes.

Seed priming with extracts of Acacia nilotica (L.) Willd. ex Delile and Sapindus mukorossi (L.) plant parts in the control of root rot fungi and growth of plants

International Nuclear Information System (INIS)

Rafi, H.; Dawar, S.; Zaki, M.J.

2015-01-01

Seed priming with plant extracts and chemicals has been used as an important growth enhancement tool in crop plants. In this research, an attempt was made to understand the mechanism of various seed priming treatments on greenhouse-grown okra (Abelmoschus esculentus (L.) Moench.), sunflower (Helianthus annuus L.), peanut (Arachis hypogaea L.) and chickpea (Cicer arietinum L.) for the control of root infecting fungi like Rhizoctonia solani (Kn), Fusarium spp. and Macrophomina phaseolina (Tassi) Goid by plant parts extracts (stem, leaves and seeds) of Acacia nilotica (L.) Willd. ex Delile and Sapindus mukorossi (L) at different time intervals (5, 10, 20, 40 minutes). Results showed significant suppression of root rot fungi and significantly enhanced the growth parameters like shoot length, root length, shoot weight and root weight. Seed-priming with A. nilotica and S. mukorossi leaves extract for 10 minutes time interval was found to be effective for the control of root rot fungi and growth of all tested leguminous and non-leguminous plants. (author)

Protective effects of Sapindus mukorossi Gaertn against fatty liver disease induced by high fat diet in rats

Energy Technology Data Exchange (ETDEWEB)

Peng, Qiuxian [School of Traditional Chinese Medicine, Southern Medical University, Guangzhou (China); Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong); Zhang, Qin; Xiao, Wei; Shao, Meng; Fan, Qin; Zhang, Hongwei [School of Traditional Chinese Medicine, Southern Medical University, Guangzhou (China); Zou, Yukai [Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong); Li, Xin [Cancer Research Institute of Southern Medical University, Guangzhou (China); Xu, Wenxue; Mo, Zhixian [School of Traditional Chinese Medicine, Southern Medical University, Guangzhou (China); Cai, Hongbing, E-mail: chbing2008@163.com [School of Traditional Chinese Medicine, Southern Medical University, Guangzhou (China)

2014-07-18

Highlights: • AESM is able to prevent the elevation of ALT and AST, and to decreased LDL-C level. • AESM demonstrates the effects of down-regulating blood fat level and protecting liver. • AESM consistent with the efficacy of simvastatin in NAFLD. - Abstract: Objectives: Study the effects of alcohol extract of Sapindus mukorossi Gaertn (AESM) on the metabolism of blood fat, morphology of fenestrated liver sinusoidal endothelial cells (LSEC), and the ultrastructure of liver cells of the rats with non-alcoholic fatty liver disease (NAFLD). Methods: Divide SD rats into control group, model group, simvastatin (7.2 mg/kg) group, and S.mukorossi Gaertn group with high dosage (0.5 g/kg), moderate dosage (0.1 g/kg), and low dosage (0.05 g/kg). After feeding with fat-rich nutrients for 3 weeks and establishing the model of hepatic adipose, conduct intragastric administration and provide the rats with fat-rich nutrients at the same time. At the 43rd day, take blood sample and measure aminotransferase and different indexes of blood fat; take hepatic tissue for pathological section, and observe the hepatic morphological patterns under light microscope; obtain and fix the hepatic tissue after injecting perfusate into the body, and observe the changes of fenestrated LSEC under scanning electron microscope; observe the ultrastructure of liver cells under transmission electron microscope. Results: High-dosage alcohol extracts of S.mukorossi Gaertn can alleviate the AST, ALT, TC, TG, LDL, γ-GT, and ALP level, as well as raise the HDL and APN level in the serum of NAFLD-rat model. In addition, through the observation from light microscope and electron microscopes, the morphology of the hepatic tissue and liver cells as well as the recovery of the fenestrated LSEC in the treatment group has become normal. Conclusions: Alcohol extracts of S.mukorossi Gaertn can regulate the level of blood fat and improve the pathological changes of the hepatic tissues in NAFLD-rat model, which

Aktivitas insektisida ekstrak buah Piper aduncum L. (Piperaceae dan Sapindus rarak DC. (Sapindaceae serta campurannya terhadap larva Crocidolomia pavonana (F. (Lepidoptera: Crambidae

Directory of Open Access Journals (Sweden)

Yan Yanuar Syahroni

2015-09-01

Full Text Available Crocidolomia pavonana is an important pest of Brassicaceous vegetable crops. Botanical insecticides are potential alternatives for the control of C. pavonana pest. Insecticidal activity of Piper aduncum and Sapindus rarak fruit extracts as well as their mixtures was evaluated against C. pavonana larvae in the laboratory. Ethyl acetate P. aduncum (EtPa extract as well as methanolic S. rarak (MeSr and aqueous S. rarak (AqSr extracts were tested separately and in mixtures against second-instar larvae C. pavonana by a leaf-residue feeding method. At the LC95 level - 72 hours after treatment (HAT, EtPa extract was about 14.5 and 12.8 times, respectively, more toxic to C. pavonana larvae than MeSr and AqSr extracts. At the LC95 level, EtPa + MeSr extract mixture (1 : 10 w/w was about 1.64 times more toxic to the test larvae than EtPa + AqSr extract mixture (1 : 10 w/w. Based on combination index at 48, 72, and 96 HAT, EtPa + MeSr extract mixture at LC50 level as well as EtPa + AqSr extract mixture at LC50 and LC95 levels had additive joint action, whereas EtPa + MeSr extract mixture at LC95 was weakly synergistic. In addition to lethal effect, the treatment with all test materials delayed the development of C. pavonana larvae from second-instar to fourth instar. Thus, EtPa, MeSr, and AqSr extracts as well as the mixtures between EtPa and S. rarak extracts are potential alternatives for the control of C. pavonana pest.

Effects of the Dietary Supplementation of Sucupira (Pterodon Emarginatus Vog. and Copaiba (Copaifera Langsdorffii Resinoils on Chicken Breast and Thigh Meat Quality and Oxidative Stability

Directory of Open Access Journals (Sweden)

CB de Lima

2015-12-01

Full Text Available ABSTRACT An experiment was conducted to evaluate the addition of the oil resins ofsucupira (Pterodon emarginatus Vog. and copaiba (Copaifera langsdorffii to broiler diets on chicken meat composition, quality, and lipid peroxidation. 350 one-d-old broiler chicks were submitted to seven treatments, consisting of the diets supplemented with copaiba (COP or sucupira (SUC resin oils at three different concentrations (500, 900, and 1300 ppm plus a negative control diet (CONT. At 37 days of age, 10 birds per treatment were selected according to the average weight of the experimental unit and slaughtered to collect breast and thigh meat, which was stored at 4°C for 24 hours to evaluate pH, color (L*, a*, b*, cooking weight loss (CWL, and shear force (SF. Raw meat was vacuum packed and stored frozen until lipid peroxidation analysis. Meat samples were pooled to prepare pre-cooked meatballs (30 ± 0.5g, stored under refrigeration (eight days, and analyzed every two days for TBARS concentration. Results were analyzed using the PROC GLM and MIXED procedures (SAS statistical software. Plant oils increased (p<0.05 breast meat humidity (HU and crude protein (CP levels and reduced (p<0.05 total lipid (TLC and ash (AS levels when compared with the CONT treatment. Plant oils increased (p<0.05 thigh meat HU when compared with the CONT. High COP dietary levels reduced (p<0.05 breast meat CWL, and increased (p<0.05 thigh meat L* values when compared to CONT, except for SUC500 and SUC900. The dietary inclusion of plant oil resins showed a pro-oxidant effect (p<0.01 on breast meat when compared with the CONT. Low SUC dietary supplementation levels significantly reduced (p<0.01 the concentration of secondary oxidation products in thigh meat.

Ethnoarchaeological Investigations of the Mountain Creek Area, North Central Texas. Volume 2. Historic Farming on the Hogwallow Prairies

Science.gov (United States)

1988-05-01

species. Once an item recovered from sites 41DL183, 41DL196, and 41TR45. was identified to genus or species, it was labeled and When viewed from the...Gray Red Haw Diospyros virginiana L. Persimmon Sapindus saponaria L. var. Wild China/ Soapberry Cercis canadensis L. Redbud Juglans spp. Walnut 15.4...spp. Plum .3 Crataegus mollis Torr. & Gray Red Haw .9 .8 .3 Diospyros virginiana L. Persimmon .3 Sapindus saponaria L. var. Wild China/ Soapberry .8 1.9

Studies on the antifouling properties of some natural products from Goa

Digital Repository Service at National Institute of Oceanography (India)

Sawant, S.S.; Wagh, A.B.

Methanol extracts of the fruits of the terrestrial plants @iRandia brandisii@@ and @iSapindus trifoliatus@@ were screened for their antifouling activities on the marine fouling diatoms @iNavicula subinflata@@ and @iN. crucicula@@. Both extracts...

Review of the genus Pentacentrus Saussure (Orthoptera: Gryllidae: Pentacentrinae) from China .

Science.gov (United States)

Liu, Hao-Yu; Mao, Shao-Li; Shi, Fu-Ming

2014-07-22

Four new species of Pentacentrus Gorochov from China are described and illustrated, P. acutiparamerus Liu & Shi sp. nov., P. biflexuous Liu & Shi sp. nov., P. emarginatus Liu & Shi sp. nov. and P. parvulus Liu & Shi sp. nov. A key and a distribution map of the Chinese species of this genus are provided.

Observations on antifertility and abortifacient herbal drugs | Shah ...

African Journals Online (AJOL)

Plur., Buddleja asiatica Lour, Chrysanthemum parthenium (L.) Bernh, Justacia adhatod L., Ricinus communis L., Zingiber officinale Roscol., Daucus crota L., Momordica charantia L., Plumbago zeylanica L., Sapindus mukorossi Gaertn., Plantago ovata Forssk, Tanacetum vulgare and Arctium lappa L. The most widely used ...

Revisão taxonômica de Myrocarpus Allemão (Leguminosae, Papilionoideae, Sophoreae Taxonomic revision of Myrocarpus Allemão (Leguminosae, Papilionoideae, Sophoreae

Directory of Open Access Journals (Sweden)

Ângela L.B. Sartori

2004-09-01

Full Text Available Em Myrocarpus, gênero exclusivamente sul-americano, são reconhecidas cinco espécies: Myrocarpus frondosus Allemão, M. leprosus Pickel, M. venezuelensis Rudd, M. fastigiatus Allemãoe M. emarginatus A.L.B. Sartori & A.M.G. Azevedo. Na delimitação das espécies são discutidos dados de morfologia, hábitats e de distribuição geográfica. A morfologia das pétalas e a ornamentação da região seminífera são caracteres relevantes na identificação das espécies, embora não utilizados até o presente. Este estudo apresenta chave de identificação das espécies, descrições, ilustrações, mapa de distribuição e novos registros de ocorrência.In Myrocarpus, an exclusively South American genus, five species are recognised: Myrocarpus frondosus Allemão, M. leprosus Pickel, M. venezuelensis Rudd, M. fastigiatus Allemãoand M. emarginatus A.L.B. Sartori & A.M.G. Azevedo. Morphologic data, habitat information and geographic distribution of each taxon are discussed. Petal morphology and ornamentation of seed chamber are an important character for species identification, though not shown previously. Key to the species, descriptions, illustrations, distribution, and new registers are presented.

FORMULATION AND EVALUATION OF A HERBAL SHAMPOO

OpenAIRE

Gouri Kumar Dash* and Noor Husna Nazirah Binti A. Razak

2017-01-01

The study was aimed at formulating and evaluating a complete herbal shampoo containing only traditionally used plant materials. The shampoo contained extracts of Hibiscus rosa-sinensis, Azadirachta indica, Trigonella foenumgraecum, Phyllanthus emblica, Sapindus mukorossi, Acacia concinna and fresh juice of Aloe vera. The physicochemical parameters such as colour, clarity, pH, skin irritation, percentage of solid contents, dirt dispersion, foaming ability and foam stability, wetting time and c...

Formulation, evaluation and comparison of the herbal shampoo with the commercial shampoos

OpenAIRE

Khaloud Al Badi; Shah A. Khan

2014-01-01

The study aimed to formulate a pure herbal shampoo and to evaluate and compare its physicochemical properties with the marketed synthetic and herbal shampoos. The herbal shampoo was formulated by adding the extracts of Acacia concinna, Sapindus mukorossi, Phyllanthus emblica, Ziziphus spina-christi and Citrus aurantifolia in different proportions to a 10% aqueous gelatin solution. Small amount of methyl paraben was added as a preservative and pH was adjusted with citric acid. Several tests su...

Determination of Br, Rb, Cs, Sc and Na in various plant leaves located in an urban park by neutron activation analysis

International Nuclear Information System (INIS)

Iqbal, M.Z.; Qadir, M.A.

1990-01-01

Br, Rb, Cs, Sc and Na concentrations were determined in different plant species from an urban park at Lahore, Pakistan to determine the effect of airborne emission on roadside ecosystem. Attention was paid to the leaves of Sapindus mukorossis, Alstonia scholaris and Diospyros embryopteris. Different varieties of tissues were found to have different concentration of trace elements when compared with each other. The concentration of trace element deposition was compared with the values reported in literature. Significant pollution was observed. (author) 5 refs.; 1 fig.; 1 tab

Effect of aqueous vegetal extratcts application on larva feeding behavior of Ascia monuste orseis at kale

OpenAIRE

Medeiros, Cesar Augusto Manfré; Boiça Júnior, Arlindo Leal

2005-01-01

Os efeitos de extratos aquosos de amêndoas de Azadirachta indica e frutos de Sapindus saponaria, aplicados em discos de folhas de couve (Brassica oleracea var. acephala) nas concentrações de 0,0117% e 1,0342% (p/v), respectivamente, foram estudados sobre a alimentação das lagartas de Ascia monuste orseis. Avaliou-se a atratividade e o consumo de área foliar de lagartas de primeiro e terceiro ínstar durante 24 horas, em condições de laboratório (T = 25 ± 2ºC, UR = 60 ± 10% e fotofase = 12 hora...

Sapindus saponaria var. drummondii (Hook. & Arn.) L. Benson: western soapberry

Science.gov (United States)

Ralph A. Read; John C. Zasada

2008-01-01

Western soapberry grows on clay soils and on dry limestone uplands from southwestern Missouri to Louisiana, and westward through Oklahoma and Texas to southern Colorado, New Mexico, southern Arizona, and northern Mexico. It is used as an indicator species for riparian habitats in parts of the southwestern United States (Tirmenstein 1990). The soapberry family comprises...

Metabolic Activity Interferometer: A Powerful Tool for Testing Antibiotics

Directory of Open Access Journals (Sweden)

Rachel R. P. Machado

2012-01-01

Full Text Available It is demonstrated that the efficiency of antibiotics can be tested using an interferometric method. Two antibiotics were used as models to show that an interferometric method to monitor the metabolic activity of slowly growing bacteria can be a safer method to judge antimicrobial properties of substances than conventional methods. The susceptibility of Mycobacterium bovis to hexane extract of Pterodon emarginatus and to the well-known antibiotic rifampicin was tested with the interferometric method and with the conventional microplate method. The microplate method revealed a potential activity of hexane extract against M. bovis. However, the interferometric method showed that the action of this substance is rather limited. Also in the case of rifampicin, the interferometric method was able to detect resistant bacteria.

Neutralización del efecto hemorrágico inducido por veneno de Bothrops asper (Serpentes: Viperidae por extractos de plantas tropicales

Directory of Open Access Journals (Sweden)

Oscar Castro

1999-09-01

Full Text Available Se evaluó la capacidad de extractos orgánicos de 48 especies de plantas costarricenses para neutralizar la actividad hemorrágica del veneno de la serpiente Bothrops asper (terciopelo. Los extractos se evaluaron mediante un bioensayo basado en inyecciones intradérmicas de veneno en ratones, o de mezclas veneno-extracto, seguidas de la cuantificación macroscópica de la hemorragia. Se observó una inhibición total de la hemorragia con los extractos etanólico, de acetato de etilo y acuoso de Bursera simaruba, Clusia torresii, C. palmana, Croton draco, Persea americana, Phoebe brenesii, Pimenta dioica, Sapindus saponaria, Smilax cuculmeca y Virola koschnyi. El análisis químico de estos extractos permitió identificar catequinas, flavonas, antocianinas y taninos condensados, los cuales podrían jugar un papel en la inhibición del efecto hemorrágico debido a la capacidad de quelar el ion zinc requerido por las metaloproteinasas hemorrágicas para su acción.Organic extracts representing 48 species included in 30 families of Costa Rican tropical plants were evaluated for their ability to neutralize hemorrhagic activity induced by the venom of the snake Bothrops asper. A bioassay in mice was used, based on intradermal injection of either venom or venom-extract mixtures followed by the measurement of hemorrhagic areas. Total inhibition of hemorrhage was observed with the ethanolic, ethyl acetate and aquous extracts of Bursera simaruba, Clusia torresii, C. palmana, Croton draco, Persea americana, Phoebe brenesii, Pimenta dioica, Sapindus saponaria, Smilax cuculmeca and Virola koschnyi. Chemical analysis of these extracts identified catequines, flavones, anthocyanines and condensated tannins, which may be responsible for the inhibitory effect observed, probably owing to the chelation of the zinc required for the catalytic activity of venom’s hemorrhagic metalloproteinases.

Detection of Diverse Novel Bat Astrovirus Sequences in the Czech Republic.

Science.gov (United States)

Dufkova, Lucie; Straková, Petra; Širmarová, Jana; Salát, Jiří; Moutelíková, Romana; Chrudimský, Tomáš; Bartonička, Tomáš; Nowotny, Norbert; Růžek, Daniel

2015-08-01

Astroviruses are a major cause of gastroenteritis in humans and animals. Recently, novel groups of astroviruses were identified in apparently healthy insectivorous bats. We report the detection of diverse novel astrovirus sequences in nine different European bat species: Eptesicus serotinus, Hypsugo savii, Myotis emarginatus, M. mystacinus, Nyctalus noctula, Pipistrellus nathusii or P. pygmaeus, P. pipistrellus, Vespertilio murinus, and Rhinolophus hipposideros. In six bat species, astrovirus sequences were detected for the first time. One astrovirus strain detected in R. hipposideros clustered phylogenetically with Chinese astrovirus strains originating from bats of the families Rhinolophidae and Hipposideridae. All other Czech astrovirus sequences from vesper bats formed, together with one Hungarian sequence, a separate monophyletic lineage within the bat astrovirus group. These findings provide new insights into the molecular epidemiology, ecology, and prevalence of astroviruses in European bat populations.

Caracterização do comércio de plantas medicinais por raizeiros em Mossoró, Rio Grande do Norte

Directory of Open Access Journals (Sweden)

Maria de Fatima Barbosa Coelho

2017-06-01

Full Text Available As plantas medicinais são, em muitos casos, a única alternativa possível para boa parte da população brasileira que as obtém geralmente do próprio quintal ou de raizeiros. O objetivo no presente estudo foi caracterizar o comércio de plantas medicinais por raizeiros em Mossoró, Rio Grande do Norte. Foram usadas as técnicas de observação direta e participante e aplicadas entrevistas semiestruturadas. A comercialização de plantas e produtos medicinais é considerada a principal fonte de renda dos raizeiros entrevistados. Foram citadas 86 plantas de uso medicinais entre os raizeiros, sendo Linum usitatissimum L. (86% a mais citada, seguida de Plectranthus barbatus L (71%, Pterodon emarginatus Vogel (71% e Bauhinia forficata Link. (71%. As plantas são procuradas para 67 tipos de enfermidades, como anemia, artrite e vermes. A gripe e inflamação foram as doenças mais citadas. As plantas são armazenadas no próprio estabelecimento por períodos longos comprometendo sua eficácia e não são cultivadas pelos raizeiros. Characterization of the medicinal plant trade by healers in Mossoró, Rio Grande do NorteAbstract: Medicinal plants are, in many cases, the only possible alternative for much of the Brazilian population that usually gets the own homegarden or healers. The aim of this study was to characterize the trade of medicinal plants by healers in Mossoró, Rio Grande do Norte. They were used the techniques of direct observation and participant and applied semi-structured interviews. The marketing of medicinal plants and products is considered the main source of income of healers. There were 86 medicinal plants among the raizers, with Linum usitatissimum L. (86% being the most cited, followed by Plectranthus barbatus L. (71%, Pterodon emarginatus Vogel (71% and Bauhinia forficata Link. (71%. Plants are sought for 67 types of diseases, from diseases such as anemia, arthritis and worms. Influenza and inflammation were the most

Plantas tóxicas para ruminantes do Sudoeste de Goiás

Directory of Open Access Journals (Sweden)

Fabiano José Ferreira de Sant'Ana

2014-05-01

Full Text Available Com o objetivo de verificar quais são as plantas incriminadas como tóxicas para ruminantes do Sudoeste de Goiás, foram realizadas 108 entrevistas com produtores rurais, médicos veterinários, zootecnistas e agrônomos de 18 municípios da região. Foram apontadas como tóxicas para ruminantes: Brachiaria spp., Enterolobium contortisiliquum, Dimorphandra mollis, Palicourea marcgravii, Pteridium aquilinum e Sorghum vulgare. Adicionalmente, foram informadas intoxicações menos frequentes por Senna occidentalis, Stryphnodendrum obovatum e Manihot esculenta. Casos isolados de intoxicação em bovinos por Asclepias curassavica e Pterodon emarginatus foram descritos por alguns entrevistados. Este trabalho demonstra que intoxicações por plantas tóxicas são frequentes na região avaliada e representam importante causa de prejuízos econômicos aos pecuaristas locais.

The use of Brazilian vegetable oils in nanoemulsions: an update on preparation and biological applications

Directory of Open Access Journals (Sweden)

Lisiane Bajerski

Full Text Available ABSTRACT Vegetable oils present important pharmacological properties, which gained ground in the pharmaceutical field. Its encapsulation in nanoemulsions is considered a promising strategy to facilitate the applicability of these natural compounds and to potentiate the actions. These formulations offer several advantages for topical and systemic delivery of cosmetic and pharmaceutical agents including controlled droplet size, protection of the vegetable oil to photo, thermal and volatilization instability and ability to dissolve and stabilize lipophilic drugs. For these reasons, the aim of this review is to report on some characteristics, preparation methods, applications and especially analyze recent research available in the literature concerning the use of vegetable oils with therapeutic characteristics as lipid core in nanoemulsions, specially from Brazilian flora, such as babassu (Orbignya oleifera, aroeira (Schinus molle L., andiroba (Carapa guaianiensis, casca-de-anta (Drimys brasiliensis Miers, sucupira (Pterodon emarginatus Vogel and carqueja doce (Stenachaenium megapotamicum oils.

Direct detection of saponins in crude extracts of soapnuts by FTIR.

Science.gov (United States)

Almutairi, Meshari Saad; Ali, Muhammad

2015-01-01

Direct detection of saponins in soapnuts (Sapindus mukorossi) using Fourier transform infrared (FTIR) spectroscopy is investigated in this project. Potassium bromide powder was mixed with extracted powder of soapnuts and compressed to a thin pellet for examination process. The outcome of the FTIR spectra of saponin demonstrated characteristic triterpenoid saponin absorptions of OH, C = O, C-H, and C = C, while the glycoside linkages to the sapogenins were indicated by the absorptions of C-O. The significance of this study is that saponin absorption peaks are directly detectable in crude aqueous and 95% ethanol extracts of soapnuts powder using FTIR spectroscopy, thereby eliminating the need of further expensive and exhaustive purification steps. The extracts of soapnuts were screened for saponins along with controls by phytochemical tests, and advanced spectroscopic techniques such as ultra fast liquid chromatography and ultra performance liquid chromatography quadrupole-time of flight-mass spectrometry were also implemented to validate the saponins.

Nutrient digestibility and beef cattle performance fed by lerak (Sapindus rarak meal in concentrate ration

Directory of Open Access Journals (Sweden)

S. Suharti

2009-10-01

Full Text Available This research was aimed to study the use of Lerak fruit meal to improve performance and feed digestibility of beef cattle. The research consisted of two trials (in vitro and in vivo studies. The in vitro trial was screening of bioactive compounds (saponin, tanin, dan diosgenin in Lerak fruit (including seed and continued to evaluate the effectivity of these compounds against ruminal protozoa. The in vivo study was done using 12 Ongole Crossbreed cattle which received 1of 3 different treatments: 1 concentrate without Lerak as control, 2 concentrate containing 2.5% Lerak, and 3 concentrate containing 5% Lerak. Anti protozoal activity, daily gain, and nutrient digestibility of beef cattle were measured. Results showed that saponin concentration in Lerak extracted by methanol was higher than that in Lerak extracted by water and Lerak meal, 81.5%; 8.2% and 3.85% respectively. Lerak extracted by methanol have higher antiprotozoal activity in vitro than Lerak extracted by water. In vivo experiment showed that there were no significant differences (P>0.05 of nutrient intake and digestibility in all treatments, that means the ration had good palatability and quality. Average daily gain of PO fed 2.5% Lerak was 20% higher than that of control diet (0.9 kg/day.

Impactitis: The impact factor myth syndrome

Directory of Open Access Journals (Sweden)

Elsaie Mohamed

2009-01-01

Full Text Available Background : In the early 1960s, Eugene Garfield and Irving Sher created the journal impact factor to help select journals for the Science Citation Index (SCI. Today it has become a widespread subject of controversy even for Garfield, the man who created it who is quoted saying " Impact Factor is not a perfect tool to measure the quality of articles but there is nothing better and it has the advantage of already being in existence and is, therefore, a good technique for scientific evaluation". The use of the term "impact factor" has gradually evolved, especially in Europe, to include both journal and author impact. This ambiguity often causes problems. It is one thing to use impact factors to compare journals and quite another to use them to compare authors. Journal impact factors generally involve relatively large populations of articles and citations. Individual authors, on average, produce much smaller numbers of articles. Objectives: Impact factor, an index based on the frequency with which a journal′s articles are cited in scientific publications, is a putative marker of journal quality. However, empiric studies on impact factor′s validity as an indicator of quality are lacking. The authors try to evaluate and highlight the validity of Impact Factors and its significance as a tool of assessment for scientific publications. Methods: Analysis of the several reports in literature and from their own point of view. Conclusion: A journal′s impact factor is based on 2 elements: the numerator, which is the number of citations in the current year to any items published in a journal in the previous 2 years, and the denominator, which is the number of substantive articles (source items published in the same 2 years. The impact factor could just as easily be based on the previous year′s articles alone, which would give an even greater weight to rapidly changing fields.

Impacted science: impact is not importance.

Science.gov (United States)

Casadevall, Arturo; Fang, Ferric C

2015-10-13

The journal impact factor (IF) exerts a tremendous influence on the conduct of scientists. The obsession with IF has been compared to a medical condition, sometimes referred to as "IF mania" or "impactitis." Here, we analyze the difference between impact and importance, using examples from the history of science to show that these are not equivalent. If impact does not necessarily equal importance, but scientists are focused on high-impact work, there is a danger that misuse of the IF may adversely affect scientific progress. We suggest five measures to fight this malady: (i) diversify journal club selections, (ii) do not judge science on the publication venue, (iii) reduce the reliance on journal citation metrics for employment and advancement, (iv) discuss the misuse of the IF in ethics courses, and (v) cite the most appropriate sources. If IF mania is indeed a medical condition, the most appropriate course of action may be disimpaction. Copyright © 2015 Casadevall and Fang.

Combined effect of soil amendment with oil cakes and seed priming in the control of root rot fungi of leguminous and non-leguminous crops

International Nuclear Information System (INIS)

Rafi, H.; Dawar, S.; Tariq, M.

2016-01-01

Organic amendments of soil help in proper aeration, rising of temperature and water holding capacity which results in better uptake of nutrients with root system gets extensive establishment. In this study, effects of soil amendment with oil seed cakes including mustard (Brassica campestris L.), cotton (Gossypium hirsutum L.), almond (Prunus amygdalus L.) and black seed (Nigella sativa L.) cakes at the rate of 0.1 and 1% w/w and priming of seeds with Acacia nilotica (L.) Willd. ex Delile and Sapindus mukorossi (L.) leaves extracts and microbial antagonists (Trichoderma harzianum and Rhizobium melilotii) was observed on the growth of plants and in the suppression of root infecting fungi. The results obtained showed that combined effect of bio-priming of seeds with T. harzianum spore suspension and amendment of soil with mustard cake at the rate of 1% was found to be most effective for the growth of leguminous and non-leguminous crop plants (peanut, chickpea, okra and sunflower) and for the reduction of root infecting fungi like Macrophomina phaseolina, Fusarium spp followed by R. meliloti primed seeds in combination with cotton, almond and black seed cakes amendment respectively as compared to control (non treated seeds and soil). (author)

Fruit Pod Extracts as a Source of Nutraceuticals and Pharmaceuticals

Directory of Open Access Journals (Sweden)

Azrina Azlan

2012-10-01

Full Text Available Fruit pods contain various beneficial compounds that have biological activities and can be used as a source of pharmaceutical and nutraceutical products. Although pods or pericarps are usually discarded when consuming the edible parts of fruits, they contain some compounds that exhibit biological activities after extraction. Most fruit pods included in this review contain polyphenolic components that can promote antioxidant effects on human health. Additionally, anti-inflammatory, antibacterial, antifungal and chemopreventive effects are associated with these fruit pod extracts. Besides polyphenolics, other compounds such as xanthones, carotenoids and saponins also exhibit health effects and can be potential sources of nutraceutical and pharmaceutical components. In this review, information on fruit pods or pericarp of Garcinia mangostana, Ceratonia siliqua, Moringa oleifera, Acacia nilotica, Sapindus rarak and Prosopis cineraria is presented and discussed with regard to their biological activity of the major compounds existing in them. The fruit pods of other ethno- botanical plants have also been reviewed. It can be concluded that although fruit pods are considered as being of no practical use and are often being thrown away, they nevertheless contain compounds that might be useful sources of nutraceutical and other pharmaceutical components.

78 FR 13082 - Draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement...

Science.gov (United States)

2013-02-26

...The Bureau of Reclamation has made available for public review and comment the draft Environmental Impact Report/Environmental Impact Statement/Environmental Impact Statement (EIR/EIS/EIS) for the Upper Truckee River Restoration and Marsh Restoration Project (Project). The California Tahoe Conservancy and the Tahoe Regional Planning Agency, the other lead agencies for the Project, made the EIR/EIS/EIS available to the public on February 8, 2013.

Lunar Impact Flash Locations from NASA's Lunar Impact Monitoring Program

Science.gov (United States)

Moser, D. E.; Suggs, R. M.; Kupferschmidt, L.; Feldman, J.

2015-01-01

Meteoroids are small, natural bodies traveling through space, fragments from comets, asteroids, and impact debris from planets. Unlike the Earth, which has an atmosphere that slows, ablates, and disintegrates most meteoroids before they reach the ground, the Moon has little-to-no atmosphere to prevent meteoroids from impacting the lunar surface. Upon impact, the meteoroid's kinetic energy is partitioned into crater excavation, seismic wave production, and the generation of a debris plume. A flash of light associated with the plume is detectable by instruments on Earth. Following the initial observation of a probable Taurid impact flash on the Moon in November 2005,1 the NASA Meteoroid Environment Office (MEO) began a routine monitoring program to observe the Moon for meteoroid impact flashes in early 2006, resulting in the observation of over 330 impacts to date. The main objective of the MEO is to characterize the meteoroid environment for application to spacecraft engineering and operations. The Lunar Impact Monitoring Program provides information about the meteoroid flux in near-Earth space in a size range-tens of grams to a few kilograms-difficult to measure with statistical significance by other means. A bright impact flash detected by the program in March 2013 brought into focus the importance of determining the impact flash location. Prior to this time, the location was estimated to the nearest half-degree by visually comparing the impact imagery to maps of the Moon. Better accuracy was not needed because meteoroid flux calculations did not require high-accuracy impact locations. But such a bright event was thought to have produced a fresh crater detectable from lunar orbit by the NASA spacecraft Lunar Reconnaissance Orbiter (LRO). The idea of linking the observation of an impact flash with its crater was an appealing one, as it would validate NASA photometric calculations and crater scaling laws developed from hypervelocity gun testing. This idea was

Efeito de extratos aquosos de plantas na oviposição da traça-das-crucíferas, em couve Effect of plants aqueous extracts on oviposition of the diamondback, in kale

Directory of Open Access Journals (Sweden)

Cesar Augusto Manfré Medeiros

2005-01-01

Full Text Available Avaliou-se o efeito de extratos aquosos de Achillea millefolium L. (folhas, Azadirachta indica A. Juss. (folhas, Bidens pilosa L. (folhas, frutos e ramos, Bougainvillea glabra Choisy (folhas, Chenopodium ambrosioides L. (folhas, frutos e ramos, Datura suaveolens Humb & Bonpl. ex. Willd (folhas, Enterolobium contortisilliquum (Vell. Morong (frutos, Mentha crispa L. (folhas e ramos, Nicotiana tabacum L. (folhas, Piper nigrum L. (folhas, Plumbago capensis Thunb. (folhas e ramos, Pothomorphe umbellata L. (folhas, Sapindus saponaria L. (folhas, S. saponaria (frutos, Solanum cernuum Vell. (folhas, Stryphnodendron adstringens (Mart Coville (casca, Symphytum officinale L. (folhas, Trichilia catigua A. Juss. (folhas, T. catigua (ramos, Trichilia pallida Sw. (folhas e T. pallida (ramos, em relação à preferência para oviposição de Plutella xylostella. Discos de folhas de couve (Brassica oleracea var. acephala cultivar Georgia foram imersos em cada extrato à concentração de 10% (massa/volume por um minuto. Em seguida, foram divididos em quatro partes iguais e duas partes foram colocadas alternadamente com outras duas partes tratadas com água destilada, em uma gaiola. A contagem dos ovos foi feita após 24 horas. Os extratos apresentaram efeito deterrente na oviposição da praga, com exceção do extrato de S. adstringens, que não diferiu da testemunha, tratada apenas com água destilada. Os extratos de E. contortisilliquum, S. saponaria (frutos e T. pallida (folhas foram os mais eficientes, apresentando 100% de deterrência.The effect of aqueous extracts from Achillea millefolium L. (leaves, Azadirachta indica A. Juss. (leaves, Bidens pilosa L. (leaves, fruits e branches, Bougainvillea glabra Choisy (leaves, Chenopodium ambrosioides L. (leaves, fruits e branches, Datura suaveolens Humb & Bonpl. ex. Willd (leaves, Enterolobium contortisilliquum (Vell. Morong (fruits, Mentha crispa L. (leaves e branches, Nicotiana tabacum L. (leaves, Piper nigrum

Microparticle impacts at ultrahigh velocities and their relation to macroparticle impacts

International Nuclear Information System (INIS)

Walsh, J.M.; Stradling, G.L.; Idzorek, G.C.; Shafer, B.P.; Curling, H.L. Jr.

1992-01-01

The Hypervelocity Microparticle Impact project at Los Alamos has utilized electrostatically accelerated iron spheres of microscopic dimensions to generate ultra-high velocity impact experiments to about 100 km/S, an order of magnitude beyond data range for precisely controlled impact tests with ordinary macroscopic projectiles. Extreme smallness of the micro impact events brings into question whether usual shock-hydrodynamic size scaling can be assumed. Validity of size scaling (and its refinement) is questioned in the present study. Impact experiments are compared in which two impact events at a given velocity, a microscopic impact and a macroscopic impact, are essentially identical except that the projectile masses and crater volumes differ by nearly 12 orders of magnitude -- linear dimensions and times differing by 4 orders of magnitude. Strain rates at corresponding points in a deforming crater increase 4 orders of magnitude with the size reduction. Departures from exact scaling, by a factor of 3.7 in crater volume, are observed for copper targets -- with micro craters being smaller than scaling would predict. Measurement of impact craters for very small impact events leads to determination of metal yield stresses at strain rates more than two orders of magnitude greater than have been obtained by other methods. Determination of material strengths at these exceedingly high strain rates is important. Results are compared to recent theoretical models by Follansbee, Kochs and Rollett. The problem is addressed of predicting crater sizes in a target material with strain rate effects. Basic results are recalled on the late stage equivalence of hypervelocity impacts. For the strain rate dependent material to show that the curve of dimensionless crater volume versus impact velocity is replaced by a family of curves, each member of which is for one final crater size. The spacing of the curves is determined by the stress versus strain properties of the material

E-IMPACT - A ROBUST HAZARD-BASED ENVIRONMENTAL IMPACT ASSESSMENT APPROACH FOR PROCESS INDUSTRIES

Directory of Open Access Journals (Sweden)

KHANDOKER A. HOSSAIN

2008-04-01

Full Text Available This paper proposes a hazard-based environmental impact assessment approach (E-Impact, for evaluating the environmental impact during process design and retrofit stages. E-Impact replaces the normalisation step of the conventional impact assessment phase. This approach compares the impact scores for different options and assigns a relative score to each option. This eliminates the complexity of the normalisation step in the evaluation phase. The applicability of the E-Impact has been illustrated through a case study of solvent selection in an acrylic acid manufacturing plant. E-Impact is used in conjunction with Aspen-HYSYS process simulator to develop mass and heat balance data.

Application of saponin biosurfactant and its recovery in the MEUF process for removal of methyl violet from wastewater.

Science.gov (United States)

Samal, Kulbhushan; Das, Chandan; Mohanty, Kaustubha

2017-12-01

The potential of saponin, a biosurfactant, in the micellar enhanced ultrafiltration (MEUF) process was tested systematically for removal of methyl violet from wastewater. For this, the aqueous extract of reetha (Sapindus mukorossi) pericarp which contains saponin was used as the biosurfactant. First, the micellar solubilization of methyl violet in saponin micelles was investigated in terms of molar solubilization power (SP) of saponin. It was observed that the adsorption of methyl violet on the agglomerates of saponin micelles was mainly responsible for the enhanced solubilization. The Gibbs free energy of solubilization (calculated as -29.63 kJ mol -1 ) suggested that process was feasible and spontaneous. The MEUF experiments were performed in batch as well as continuous mode using saponin biosurfactant, and the effect of operating parameters on permeate flux and solute retention were evaluated. The removal of methyl violet in MEUF process was >99% achieved with 10 kDa polyethersulfone (PES) membrane for feed dye concentration of 250 mg L -1 at studied conditions. Finally, the saponin in permeate was recovered using n-heptane and n-butanol by solvent extraction process. The solvent n-butanol showed better extraction efficiency as compared to n-heptane for saponin extraction. Copyright © 2017 Elsevier Ltd. All rights reserved.

Foam Properties and Detergent Abilities of the Saponins from Camellia oleifera

Science.gov (United States)

Chen, Yu-Fen; Yang, Chao-Hsun; Chang, Ming-Shiang; Ciou, Yong-Ping; Huang, Yu-Chun

2010-01-01

The defatted seed meal of Camellia oleifera has been used as a natural detergent and its extract is commercially utilized as a foam-stabilizing and emulsifying agent. The goal of this study was to investigate the foam properties and detergent ability of the saponins from the defatted seed meal of C. oleifera. The crude saponin content in the defatted seed meal of C. oleifera was 8.34 and the total saponins content in the crude saponins extract was 39.5% (w/w). The foaming power of the 0.5 crude saponins extract solution from defatted seed meal of C. oleifera was 37.1 of 0.5 SLS solution and 51.3% to that of 0.5% Tween 80 solution. The R5 value of 86.0% represents good foam stability of the crude saponins extracted from the defatted seed meal of the plant. With the reduction of water surface tension from 72 mN/m to 50.0 mN/m, the 0.5% crude saponins extract solution has wetting ability. The sebum-removal experiment indicated that the crude saponins extract has moderate detergency. The detergent abilities of the saponins from C. oleifera and Sapindus mukorossi were also compared. PMID:21151446

Load and wear experiments on the impact hammer of a vertical shaft impact crusher

International Nuclear Information System (INIS)

Yang, J H; Fang, H Y; Luo, M

2015-01-01

Impact hammers are important components of impact crushers, and are often shortlived due to the high-impact nature of their use. Wear-resistant alloys are welded to the surface of impact hammers to prolong their service life. In this paper, a simulation model of the rotor and impact hammers in impact crushers was designed to utilize the Discrete Element Method (DEM). The wear-resistant alloy on each impact hammer was divided into twenty-two action regions. The load distribution on each alloy block is affected by the structural and manufacturing parameters of the impact crusher. The wear distribution of the impact hammer was measured by shape morphology according to relative impact crushers. The results demonstrated that the real measurements of wear distribution on the impact hammer were similar to simulated load distribution measurements on the same surface. The study of load distribution of impact hammers by DEM established a theoretical foundation on which to base the optimal design of impact crushers. (paper)

Current status of Paragonimus and paragonimiasis in Ecuador

Directory of Open Access Journals (Sweden)

Manuel Calvopiña

2014-11-01

Full Text Available A review of national and international publications on paragonimiasis in Ecuador, epidemiological records from the Ministry of Public Health and unpublished research data was conducted to summarise the current status of the parasite/disease. The purpose of the review is to educate physicians, policy-makers and health providers on the status of the disease and to stimulate scientific investigators to conduct further research. Paragonimiasis was first diagnosed in Ecuador 94 years ago and it is endemic to both tropical and subtropical regions in 19 of 24 provinces in the Pacific Coast and Amazon regions. Paragonimus mexicanus is the only known species in the country, with the mollusc Aroapyrgus colombiensis and the crabs Moreirocarcinus emarginatus, Hypolobocera chilensis and Hypolobocera aequatorialis being the primary and secondary intermediate hosts, respectively. Recent studies found P. mexicanus metacercariae in Trichodactylus faxoni crabs of the northern Amazon. Chronic pulmonary paragonimiasis is commonly misdiagnosed and treated as tuberculosis and although studies have demonstrated the efficacy of praziquantel and triclabendazole for the treatment of human infections, neither drug is available in Ecuador. Official data recorded from 1978-2007 indicate an annual incidence of 85.5 cases throughout the 19 provinces, with an estimated 17.2% of the population at risk of infection. There are no current data on the incidence/prevalence of infection, nor is there a national control programme.

White-nose syndrome fungus: a generalist pathogen of hibernating bats.

Directory of Open Access Journals (Sweden)

Jan Zukal

Full Text Available Host traits and phylogeny can determine infection risk by driving pathogen transmission and its ability to infect new hosts. Predicting such risks is critical when designing disease mitigation strategies, and especially as regards wildlife, where intensive management is often advocated or prevented by economic and/or practical reasons. We investigated Pseudogymnoascus [Geomyces] destructans infection, the cause of white-nose syndrome (WNS, in relation to chiropteran ecology, behaviour and phylogenetics. While this fungus has caused devastating declines in North American bat populations, there have been no apparent population changes attributable to the disease in Europe. We screened 276 bats of 15 species from hibernacula in the Czech Republic over 2012 and 2013, and provided histopathological evidence for 11 European species positive for WNS. With the exception of Myotis myotis, the other ten species are all new reports for WNS in Europe. Of these, M. emarginatus, Eptesicus nilssonii, Rhinolophus hipposideros, Barbastella barbastellus and Plecotus auritus are new to the list of P. destructans-infected bat species. While the infected species are all statistically phylogenetically related, WNS affects bats from two suborders. These are ecologically diverse and adopt a wide range of hibernating strategies. Occurrence of WNS in distantly related bat species with diverse ecology suggests that the pathogen may be a generalist and that all bats hibernating within the distribution range of P. destructans may be at risk of infection.

White-nose syndrome fungus: a generalist pathogen of hibernating bats.

Science.gov (United States)

Zukal, Jan; Bandouchova, Hana; Bartonicka, Tomas; Berkova, Hana; Brack, Virgil; Brichta, Jiri; Dolinay, Matej; Jaron, Kamil S; Kovacova, Veronika; Kovarik, Miroslav; Martínková, Natália; Ondracek, Karel; Rehak, Zdenek; Turner, Gregory G; Pikula, Jiri

2014-01-01

Host traits and phylogeny can determine infection risk by driving pathogen transmission and its ability to infect new hosts. Predicting such risks is critical when designing disease mitigation strategies, and especially as regards wildlife, where intensive management is often advocated or prevented by economic and/or practical reasons. We investigated Pseudogymnoascus [Geomyces] destructans infection, the cause of white-nose syndrome (WNS), in relation to chiropteran ecology, behaviour and phylogenetics. While this fungus has caused devastating declines in North American bat populations, there have been no apparent population changes attributable to the disease in Europe. We screened 276 bats of 15 species from hibernacula in the Czech Republic over 2012 and 2013, and provided histopathological evidence for 11 European species positive for WNS. With the exception of Myotis myotis, the other ten species are all new reports for WNS in Europe. Of these, M. emarginatus, Eptesicus nilssonii, Rhinolophus hipposideros, Barbastella barbastellus and Plecotus auritus are new to the list of P. destructans-infected bat species. While the infected species are all statistically phylogenetically related, WNS affects bats from two suborders. These are ecologically diverse and adopt a wide range of hibernating strategies. Occurrence of WNS in distantly related bat species with diverse ecology suggests that the pathogen may be a generalist and that all bats hibernating within the distribution range of P. destructans may be at risk of infection.

IMPACT2C: Quantifying projected impacts under 2°C warming

Science.gov (United States)

Jacob, D.; Kotova, L.; Impact2C Team

2012-04-01

Political discussions on the European goal to limit global warming to 2°C demand, that information is provided to society by the best available science on projected impacts and possible benefits. The new project IMPACT2C is supported by the European Commission's 7th Framework Programme as a 4 year large-scale integrating project. IMPACT2C is coordinated by the Climate Service Center, Helmholtz-Zentrum Geesthacht. IMPACT2C enhances knowledge, quantifies climate change impacts, and adopts a clear and logical structure, with climate and impacts modelling, vulnerabilities, risks and economic costs, as well as potential responses, within a pan-European sector based analysis. The project utilises a range of models within a multi-disciplinary international expert team and assesses effects on water, energy, infrastructure, coasts, tourism, forestry, agriculture, ecosystems services, and health and air quality-climate interactions. IMPACT2C introduces key innovations. First, harmonised socio-economic assumptions/scenarios will be used, to ensure that both individual and cross-sector assessments are aligned to the 2°C (1.5°C) scenario for both impacts and adaptation, e.g. in relation to land-use pressures between agriculture and forestry. Second, it has a core theme of uncertainty, and will develop a methodological framework integrating the uncertainties within and across the different sectors, in a consistent way. In so doing, analysis of adaptation responses under uncertainty will be enhanced. Finally, a cross-sectoral perspective is adopted to complement the sector analysis. A number of case studies will be developed for particularly vulnerable areas, subject to multiple impacts (e.g. the Mediterranean), with the focus being on cross-sectoral interactions (e.g. land use competition) and cross-cutting themes (e.g. cities). The project also assesses climate change impacts in some of the world's most vulnerable regions: Bangladesh, Africa (Nile and Niger basins), and the

Lost Impacts (Invited)

Science.gov (United States)

Schultz, P. H.; Stickle, A. M.

2009-12-01

The absence of a clearly identified crater (or craters) for the proposed YDB impact has raised questions concerning the reality of such an event. Geologic studies have identified impact deposits well before recognizing a causative crater (e.g., Chicxulub and Chesapeake Bay); some have yet to be discovered (e.g., Australasian tektite strewnfields). The absence of a crater, therefore, cannot be used as an argument against the reality of the YDB impact (and its possible consequences). The study here addresses how a large on-land impact during the late Pleistocene or early Holocene could avoid easy detection today. It does not argue the case for a YDB impact, since such evidence must come from the rock record. During the late Pleistocene, the receding Laurentide ice sheet still covered a significant portion of Canada. While a large (1km) body impacting vertically (90°) would penetrate such a low-impedance ice layer and excavate the substrate, an oblique impact couples more of its energy into the surface layer, thereby partially shielding the substrate. Three approaches address the effectiveness of this flak-jacket effect. First, hypervelocity impact experiments at the NASA Ames Vertical Gun Range investigated the effectiveness of low-impedance layers of different thicknesses for mitigating substrate damage. Second, selected experiments were compared with hydrocode models (see Stickle and Schultz, this volume) and extended to large scales. Third, comparisons were made with relict craters found in eroding sediment and ice covers on Mars. Oblique impacts (30 degrees) into soft particulates (no. 24 sand) covering a solid substrate (aluminum) have no effect on the final crater diameter for layer thicknesses exceeding a projectile diameter and result in only plastic deformation in the substrate. In contrast, a vertical impact requires a surface layer at least 3 times the projectile diameter to achieve the same diameter (with significant substrate damage). Oblique impacts

IMPACT_S: integrated multiprogram platform to analyze and combine tests of selection.

Directory of Open Access Journals (Sweden)

Emanuel Maldonado

Full Text Available Among the major goals of research in evolutionary biology are the identification of genes targeted by natural selection and understanding how various regimes of evolution affect the fitness of an organism. In particular, adaptive evolution enables organisms to adapt to changing ecological factors such as diet, temperature, habitat, predatory pressures and prey abundance. An integrative approach is crucial for the identification of non-synonymous mutations that introduce radical changes in protein biochemistry and thus in turn influence the structure and function of proteins. Performing such analyses manually is often a time-consuming process, due to the large number of statistical files generated from multiple approaches, especially when assessing numerous taxa and/or large datasets. We present IMPACT_S, an easy-to-use Graphical User Interface (GUI software, which rapidly and effectively integrates, filters and combines results from three widely used programs for assessing the influence of selection: Codeml (PAML package, Datamonkey and TreeSAAP. It enables the identification and tabulation of sites detected by these programs as evolving under the influence of positive, neutral and/or negative selection in protein-coding genes. IMPACT_S further facilitates the automatic mapping of these sites onto the three-dimensional structures of proteins. Other useful tools incorporated in IMPACT_S include Jmol, Archaeopteryx, Gnuplot, PhyML, a built-in Swiss-Model interface and a PDB downloader. The relevance and functionality of IMPACT_S is shown through a case study on the toxicoferan-reptilian Cysteine-rich Secretory Proteins (CRiSPs. IMPACT_S is a platform-independent software released under GPLv3 license, freely available online from http://impact-s.sourceforge.net.

IMPACT_S: integrated multiprogram platform to analyze and combine tests of selection.

Science.gov (United States)

Maldonado, Emanuel; Sunagar, Kartik; Almeida, Daniela; Vasconcelos, Vitor; Antunes, Agostinho

2014-01-01

Among the major goals of research in evolutionary biology are the identification of genes targeted by natural selection and understanding how various regimes of evolution affect the fitness of an organism. In particular, adaptive evolution enables organisms to adapt to changing ecological factors such as diet, temperature, habitat, predatory pressures and prey abundance. An integrative approach is crucial for the identification of non-synonymous mutations that introduce radical changes in protein biochemistry and thus in turn influence the structure and function of proteins. Performing such analyses manually is often a time-consuming process, due to the large number of statistical files generated from multiple approaches, especially when assessing numerous taxa and/or large datasets. We present IMPACT_S, an easy-to-use Graphical User Interface (GUI) software, which rapidly and effectively integrates, filters and combines results from three widely used programs for assessing the influence of selection: Codeml (PAML package), Datamonkey and TreeSAAP. It enables the identification and tabulation of sites detected by these programs as evolving under the influence of positive, neutral and/or negative selection in protein-coding genes. IMPACT_S further facilitates the automatic mapping of these sites onto the three-dimensional structures of proteins. Other useful tools incorporated in IMPACT_S include Jmol, Archaeopteryx, Gnuplot, PhyML, a built-in Swiss-Model interface and a PDB downloader. The relevance and functionality of IMPACT_S is shown through a case study on the toxicoferan-reptilian Cysteine-rich Secretory Proteins (CRiSPs). IMPACT_S is a platform-independent software released under GPLv3 license, freely available online from http://impact-s.sourceforge.net.

Cumulative Impact Assessment: Approaching Environmental Capacity in Development Area Using Environmental Impact Assessment Information

Science.gov (United States)

Cho, N.; Lee, M. J.; Maeng, J. H.

2017-12-01

Environmental impact assessment estimates the impact of development as a business unit and establishes mitigation plan. If the development is done, its economic effects can spread to the nearby areas. So that various developments can be distributed at different time intervals. The impact of the new developments can be combined with existing environmental impacts and can have a larger impact. That is, Cumulative impact assessment is needed to consider the environmental capacity of the Nearby area. Cumulative impact assessments require policy tools such as environmental impact assessment information and cumulative impact estimation models. In Korea, environmental information (water quality, air quality, etc.) of the development site is measured for environmental impact assessment and monitored for a certain period (generally 5 years) after the project. In addition, by constructing the environmental information as a spatial database, it is possible to express the environmental impact on a regional basis spatially and to intuitively use it for development site selection. Utilizing a composite model of environmental impact assessment information and Remote Sensing data for cumulative impact estimation, That can be used as a policy decision support tool that provides quantitative information for development area management, such as time series effect and sprawl phenomenon.

Social Impact Open Repository (SIOR). Transforming the peripheral space of social impact of research

Energy Technology Data Exchange (ETDEWEB)

Joanpere, M.; Samano, E.; Gomez, A.

2016-07-01

The EC FP7 project “IMPACT-EV, Evaluating the impact and outcomes of EU SSH research” (2014-2017) aims at developing a permanent system of selection, monitoring and evaluation of the various impacts of Social Sciences and the Humanities research, with a very special attention to the social impact of research. The Work Package entitled “Identifying social impact of SSH research projects” has the main aim of analysing the social impact of SSH research and the factors that have contributed to obtain or not this impact, in order to create indicators to identify and evaluate the social impact of the SSH research ex-ante and ex-post. (Author)

Preliminary study of impact fragility to RC wall subjected to aircraft impact

International Nuclear Information System (INIS)

Shin, Sang Shup; Hahm, Dae Gi; Choi, In Kil

2012-01-01

International experience has shown that internal and external hazards such as fires, earthquakes, and aircraft impacts can be significant safety contributors to the risk to infrastructures such as nuclear power plants. Since the aircraft accident at the World Trade Center (WTC) on September 11, 2001, an aircraft impact problem has been increasingly of the interest and is one of important categories of an unexpected external hazard field. To date, aircraft impact analyses has most focused on the response analysis to the target structures. However, this preliminary study carried out an impact fragility analysis to reinforced concrete (RC) wall subjected to an aircraft impact. The aircraft velocity is used as the important variable of this study. The impact analysis of the applied Ri era's forcing function is used by Abaqus/Explicit

Behind the scenes of GS: the impact of IMPACT

CERN Multimedia

Katarina Anthony

2014-01-01

Carrying out a job at CERN can be a complicated task, with coordinators reaching across departments to manage personnel, ensure safety and minimise the impact of their activities on the rest of the Laboratory.  To help coordinators with this tough task, the GS Department developed IMPACT, the platform that, since 2011, has unified CERN's major experiment, accelerator and injector coordination tools.   When planning interventions both large and small, IMPACT (the Intervention Management Planning and Coordination Tool) is the go-to gizmo on every CERN coordinator's tool belt. "IMPACT is a central repository of activity requests that standardises the way work is declared at CERN," says Benoit Daudin, GS-AIS-PM Section Leader. "If you need to intervene in any of CERN's major facilities, you need to declare this work on IMPACT. The tool will analyse the job and see whose approval is required. This could simply b...

A method for comparing impacts with real targets to impacts onto the IAEA unyielding target

International Nuclear Information System (INIS)

Ammerman, D.J.

1991-01-01

The severity of the IAEA accident conditions test requirement (IAEA 1990) of an impact onto an essentially unyielding target from a drop height of 9 meters encompasses a large fraction of all real world impacts. This is true, in part, because of the unyielding nature of the impact target. Impacts onto the unyielding target have severities equivalent to higher velocity impacts onto real targets which are not unyielding. The severity of impacts with yielding targets is decreased by the amount of the impact energy absorbed in damaging the target. In demonstrating the severity of the regulatory impact event it is advantageous to be able to relate this impact onto an essentially unyielding target to impacts with yielding targets

Aquatic impact

International Nuclear Information System (INIS)

Anon.

1978-01-01

Because of the high reproduction rates of the plankton and good tidal mixing at existing plants, depletion of plankton populations has not occurred. Spawning occurs throughout the Bay for the species of fish present here, so local depletions are insufficient to decrease Bay populations. Impingement totals are small compared to mortality due to other sources. In addition, efforts to reduce these totals are now underway at all three existing plants, Calvert Cliffs, Morgantown, and Chalk Point. Habitat modification effects, usually more subtle in nature, have minor, localized impacts. Coupled together, the power plant monitoring studies show a low cumulative impact on the mesohaline environment. The major area of concern within this region is the impact of cooling water withdrawals upon the nursery and spawning areas of striped bass and other anadromous species. Possum Point and Vienna have the highest potential for impact. New facilities planned for this region (Douglas Point, Summit, and Vienna) would increase withdrawals. The overall impact upon striped bass due to entrainment drops from an estimated 6.6% entrainment (upper bound) of the eggs and larvae spawned in the Maryland portion of the Bay at present to an estimated 3.4% (upper bound) after 1987. The addition of Douglas Point and Summit is more than off-set by the retirements of the once-through cooling units at Vienna. No impingement data are available at any of the present plants; however, degraded water quality at the Baltimore and Washington plants appears to have severely restricted fish populations in these waters. The proposed plants are expected to have no major impacts in the areas of impingement or habitat modification due to the small amount of water withdrawn

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

Energy Technology Data Exchange (ETDEWEB)

Ruegg, Rosalie [TIA Consulting, Inc. (United States); O' Connor, Alan C. [RTI International, Research Triangle Park, NC (United States); Loomis, Ross J. [RTI International, Research Triangle Park, NC (United States)

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

Impact assessment revisited

DEFF Research Database (Denmark)

Thiele, Jan; Kollmann, Johannes Christian; Markussen, Bo

2010-01-01

; and (4) the total invaded range is an inappropriate measure for quantifying regional impact because the habitat area available for invasion can vary markedly among invasive species. Mathematical models and empirical data using an invasive alien plant species (Heracleum mantegazzianum) indicate......The theoretical underpinnings of the assessment of invasive alien species impacts need to be improved. At present most approaches are unreliable to quantify impact at regional scales and do not allow for comparison of different invasive species. There are four basic problems that need...... and we discuss the quantification of the invaded range. These improvements are crucial for impact assessment with the overall aim of prioritizing management of invasive species....

The impactful of a good impact factor

Directory of Open Access Journals (Sweden)

Paloma Celada

2017-09-01

Full Text Available This paper ironically analyzes about the impact factor, a quality index that obsesses scientific journals and the authors who risk to in them. It also criticizes why this factor is unfair in assessing the merits of scientific researchs and what it means for researchers and some publishers. Using a humorous touch but also under a very serious scientific point of view, the validity of the impact factor is questioned to define the quality and credibility of a scientific journal.

Economic impact

Energy Technology Data Exchange (ETDEWEB)

Technology Transfer Department

2001-06-01

In federal fiscal year 2000 (FY00), Berkeley Lab had 4,347 full- and part-time employees. In addition, at any given time of the year, there were more than 1,000 Laboratory guests. These guests, who also reside locally, have an important economic impact on the nine-county Bay Area. However, Berkeley Lab's total economic impact transcends the direct effects of payroll and purchasing. The direct dollars paid to the Lab's employees in the form of wages, salaries, and benefits, and payments made to contractors for goods and services, are respent by employees and contractors again and again in the local and greater economy. Further, while Berkeley Lab has a strong reputation for basic scientific research, many of the Lab's scientific discoveries and inventions have had direct application in industry, spawning new businesses and creating new opportunities for existing firms. This analysis updates the Economic Impact Analysis done in 1996, and its purpose is to describe the economic and geographic impact of Laboratory expenditures and to provide a qualitative understanding of how Berkeley Lab impacts and supports the local community. It is intended as a guide for state, local, and national policy makers as well as local community members. Unless otherwise noted, this analysis uses data from FY00, the most recent year for which full data are available.

Atmosphere Impact Losses

Science.gov (United States)

Schlichting, Hilke E.; Mukhopadhyay, Sujoy

2018-02-01

Determining the origin of volatiles on terrestrial planets and quantifying atmospheric loss during planet formation is crucial for understanding the history and evolution of planetary atmospheres. Using geochemical observations of noble gases and major volatiles we determine what the present day inventory of volatiles tells us about the sources, the accretion process and the early differentiation of the Earth. We further quantify the key volatile loss mechanisms and the atmospheric loss history during Earth's formation. Volatiles were accreted throughout the Earth's formation, but Earth's early accretion history was volatile poor. Although nebular Ne and possible H in the deep mantle might be a fingerprint of this early accretion, most of the mantle does not remember this signature implying that volatile loss occurred during accretion. Present day geochemistry of volatiles shows no evidence of hydrodynamic escape as the isotopic compositions of most volatiles are chondritic. This suggests that atmospheric loss generated by impacts played a major role during Earth's formation. While many of the volatiles have chondritic isotopic ratios, their relative abundances are certainly not chondritic again suggesting volatile loss tied to impacts. Geochemical evidence of atmospheric loss comes from the {}3He/{}^{22}Ne, halogen ratios (e.g., F/Cl) and low H/N ratios. In addition, the geochemical ratios indicate that most of the water could have been delivered prior to the Moon forming impact and that the Moon forming impact did not drive off the ocean. Given the importance of impacts in determining the volatile budget of the Earth we examine the contributions to atmospheric loss from both small and large impacts. We find that atmospheric mass loss due to impacts can be characterized into three different regimes: 1) Giant Impacts, that create a strong shock transversing the whole planet and that can lead to atmospheric loss globally. 2) Large enough impactors (m_{cap} ≳ √{2

Periodic-impact motions and bifurcations in dynamics of a plastic impact oscillator with a frictional slider

International Nuclear Information System (INIS)

Luo, G.W.; Lv, X.H.; Ma, L.

2008-01-01

A two-degree-of-freedom plastic impact oscillator with a frictional slider is considered. Dynamics of the plastic impact oscillator are analyzed by a three-dimensional map, which describes free flight and sticking solutions of two masses of the system, between impacts, supplemented by transition conditions at the instants of impacts. Piecewise property and singularity are found to exist in the impact Poincare map. The piecewise property of the map is caused by the transitions of free flight and sticking motions of two masses immediately after the impact, and the singularity of the map is generated via the grazing contact of two masses immediately before the impact. These properties of the map have been shown to exhibit particular types of sliding and grazing bifurcations of periodic-impact motions under parameter variation. The influence of piecewise property, grazing singularity and parameter variation on dynamics of the vibro-impact system is analyzed. The global bifurcation diagrams of before-impact velocity as a function of the excitation frequency are plotted to predict much of the qualitative behavior of the system. The global bifurcations of period-N single-impact motions of the plastic impact oscillator are found to exhibit extensive and systematic characteristics. Dynamics of the impact oscillator, in the elastic impact case, is also analyzed. This type of impact is modelled by using the conditions of conservation of momentum and an instantaneous coefficient of restitution rule. The differences in periodic-impact motions and bifurcations are found by making a comparison between dynamic behaviors of the plastic and elastic impact oscillators with a frictional slider. The best progression of the plastic impact oscillator is found to occur in period-1 single-impact sticking motion with large impact velocity. The largest progression of the elastic impact oscillator occurs in period-1 multi-impact motion. The simulative results show that the plastic impact

Evolving protected-area impacts in Panama: impact shifts show that plans require anticipation

International Nuclear Information System (INIS)

Haruna, Akiko; Pfaff, Alexander; Van den Ende, Sander; Joppa, Lucas

2014-01-01

Protected areas (PAs) are the leading forest conservation policy, so accurate evaluation of future PA impact is critical in conservation planning. Yet by necessity impact evaluations use past data. Here we argue that forward-looking plans should blend such evaluations with anticipation of shifts in threats. Applying improved methods to evaluate past impact, we provide rigorous support for that conceptual approach by showing that PAs’ impacts on deforestation shifted with land use. We study the Republic of Panama, where species-dense tropical forest faces real pressure. Facing variation in deforestation pressure, the PAs’ impacts varied across space and time. Thus, if shifts in pressure levels and patterns could be anticipated, that could raise impact. (paper)

A method for comparing impacts with real targets to impacts onto the IAEA unyielding target

International Nuclear Information System (INIS)

Ammerman, D.J.

1993-01-01

A mathematically rigorous method is developed for relating impacts with yielding targets to lower velocity impacts with unyielding targets. The method correctly models the mechanics of the impact and the conversion of kinetic energy to strain energy. An important result shown by the example problem is that apparent target hardness depends on the stiffness of the impacting package. For a cask with impact limiters a 26.8 m/s impact onto hard soil results in equivalent forces as a 13.9 m/s impact onto an unyielding target. For the same cask without impact limiters a 26.8 m/s impact onto hard soil is equivalent to a 1.74 m/s impact onto an unyielding target. This is one reason why non-technical members of the public often have difficulty realizing the severity of the regulatory impact. For most people, objects such as trucks and bridge columns appear to be very hard, but to many radioactive material shipping packages these objects are relatively soft. The method discussed in this paper for relating impacts with yielding targets to lower velocity impacts with unyielding targets helps to explain how the regulatory impact accident provides a high degree of safety to the public. This methodology is relatively simple to use, and can be applied to the 'What if' scenarios brought up by interveners. (J.P.N.)

Normalization of Impact Energy by Laminate Thickness for Compression After Impact Testing

Science.gov (United States)

Nettles, A. T.; Hromisin, S. M.

2013-01-01

The amount of impact energy used to damage a composite laminate is a critical parameter when assessing residual strength properties. The compression after impact (CAI) strength of impacted laminates is dependent upon how thick the laminate is and this has traditionally been accounted for by normalizing (dividing) the impact energy by the laminate's thickness. However, when comparing CAI strength values for a given lay-up sequence and fiber/resin system, dividing the impact energy by the specimen thickness has been noted by the author to give higher CAI strength values for thicker laminates. A study was thus undertaken to assess the comparability of CAI strength data by normalizing the impact energy by the specimen thickness raised to a power to account for the higher strength of thicker laminates. One set of data from the literature and two generated in this study were analyzed by dividing the impact energy by the specimen thickness to the 1, 1.5, 2, and 2.5 powers. Results show that as laminate thickness and damage severity decreased, the value which the laminate thickness needs to be raised to in order to yield more comparable CAI data increases.

Stabilizing impacts in force-reflecting teleoperation using distance-to-impact estimates

International Nuclear Information System (INIS)

McAree, P.R.; Daniel, R.W.

2000-01-01

The level of force that can be stably reflected to the human operator in a force-reflecting teleoperator is constrained by the dynamics of impact between the slave arm and its environment. This paper models the underlying dynamics of impact and describes how the impact effects can be minimized using estimates of the distance between the slave and objects in its workspace. The approach is based on stochastic variational principles and seeks to limit the momentum of the slave arm at impact. Preliminary experimental results show that the approach allows extension of the range of frequencies that can be stably reflected to the human operator

Seasonal impact of quarry mining effluent discharge impacted soils ...

African Journals Online (AJOL)

This study was designed to assess the impact quarry mining effluent discharge impacted soil on growth parameters and phytochemical constituents of edible vegetables. Three quarry mining sites were used for the study that covered wet and dry seasons. Plant growth such as plant height, leaf area, internodes and plant ...

Impact Mechanics

Science.gov (United States)

Stronge, W. J.

2004-03-01

Impact mechanics is concerned with the reaction forces that develop during a collision and the dynamic response of structures to these reaction forces. The subject has a wide range of engineering applications, from designing sports equipment to improving the crashworthiness of automobiles. This book develops several different methodologies for analysing collisions between structures. These range from rigid body theory for structures that are stiff and compact, to vibration and wave analyses for flexible structures. The emphasis is on low-speed impact where damage is local to the small region of contact between the colliding bodies. The analytical methods presented give results that are more robust or less sensitive to initial conditions than have been achieved hitherto. As a text, Impact Mechanics builds upon foundation courses in dynamics and strength of materials. It includes numerous industrially relevant examples and end-of-chapter homework problems drawn from industry and sports. Practising engineers will also find the methods presented in this book useful in calculating the response of a mechanical system to impact.

Social Impact Assessment in Europe

DEFF Research Database (Denmark)

Larsen, Sanne Vammen; Hansen, Anne Merrild; Lyhne, Ivar

2015-01-01

Social impact assessment (SIA) is applied worldwide to assess social impacts of plans and projects. In Europe, directives on environmental assessment (EA) require attention to social impacts, however, there is a need to investigate the implementation in practise. To this end, we study three Danish...... are not suggested or are postponed and the geographical distribution of impacts assessed is biased towards including negative local impacts. We discuss the scope and handling of social impacts, and possible implications. Based on this, we conclude with the view that EA might do the job of handling social impacts...... cases, which are characterised by debates and conflicts on social issues. Analysis of the EA statements shows inclusion of a broad range of social impacts. However, the EAs do not fully match the concerns of the public, and social impacts are not always analysed in depth, mitigation measures...

FUEL CASK IMPACT LIMITER VULNERABILITIES

International Nuclear Information System (INIS)

Leduc, D.; England, J.; Rothermel, R.

2009-01-01

Cylindrical fuel casks often have impact limiters surrounding just the ends of the cask shaft in a typical 'dumbbell' arrangement. The primary purpose of these impact limiters is to absorb energy to reduce loads on the cask structure during impacts associated with a severe accident. Impact limiters are also credited in many packages with protecting closure seals and maintaining lower peak temperatures during fire events. For this credit to be taken in safety analyses, the impact limiter attachment system must be shown to retain the impact limiter following Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) impacts. Large casks are often certified by analysis only because of the costs associated with testing. Therefore, some cask impact limiter attachment systems have not been tested in real impacts. A recent structural analysis of the T-3 Spent Fuel Containment Cask found problems with the design of the impact limiter attachment system. Assumptions in the original Safety Analysis for Packaging (SARP) concerning the loading in the attachment bolts were found to be inaccurate in certain drop orientations. This paper documents the lessons learned and their applicability to impact limiter attachment system designs

Ejecta from Ocean Impacts

Science.gov (United States)

Kyte, Frank T.

2003-01-01

Numerical simulations of deep-ocean impact provide some limits on the size of a projectile that will not mix with the ocean floor during a deep-ocean impact. For a vertical impact at asteroidal velocities (approx. 20 km/s), mixing is only likely when the projectile diameter is greater than 112 of the water depth. For oblique impacts, even larger projectiles will not mix with ocean floor silicates. Given the typical water depths of 4 to 5 km in deep-ocean basins, asteroidal projectiles with diameters as large as 2 or 3 km may commonly produce silicate ejecta that is composed only of meteoritic materials and seawater salts. However, the compressed water column beneath the projectile can still disrupt and shock metamorphose the ocean floor. Therefore, production of a separate, terrestrial ejecta component is not ruled out in the most extreme case. With increasing projectile size (or energy) relative to water depths, there must be a gradation between oceanic impacts and more conventional continental impacts. Given that 60% of the Earth's surface is covered by oceanic lithosphere and 500 m projectiles impact the Earth on 10(exp 5) y timescales, there must be hundreds of oceanic impact deposits in the sediment record awaiting discovery.

Experience and lessons from health impact assessment for human rights impact assessment.

Science.gov (United States)

Salcito, Kendyl; Utzinger, Jürg; Krieger, Gary R; Wielga, Mark; Singer, Burton H; Winkler, Mirko S; Weiss, Mitchell G

2015-09-16

As globalisation has opened remote parts of the world to foreign investment, global leaders at the United Nations and beyond have called on multinational companies to foresee and mitigate negative impacts on the communities surrounding their overseas operations. This movement towards corporate impact assessment began with a push for environmental and social inquiries. It has been followed by demands for more detailed assessments, including health and human rights. In the policy world the two have been joined as a right-to-health impact assessment. In the corporate world, the right-to-health approach fulfils neither managers' need to comprehensively understand impacts of a project, nor rightsholders' need to know that the full suite of their human rights will be safe from violation. Despite the limitations of a right-to-health tool for companies, integration of health into human rights provides numerous potential benefits to companies and the communities they affect. Here, a detailed health analysis through the human rights lens is carried out, drawing on a case study from the United Republic of Tanzania. This paper examines the positive and negative health and human rights impacts of a corporate operation in a low-income setting, as viewed through the human rights lens, considering observations on the added value of the approach. It explores the relationship between health impact assessment (HIA) and human rights impact assessment (HRIA). First, it considers the ways in which HIA, as a study directly concerned with human welfare, is a more appropriate guide than environmental or social impact assessment for evaluating human rights impacts. Second, it considers the contributions HRIA can make to HIA, by viewing determinants of health not as direct versus indirect, but as interrelated.

LCA of contaminated site remediation - integration of site-specific impact assessment of local toxic impacts

DEFF Research Database (Denmark)

Lemming, Gitte; Hauschild, Michael Zwicky; Chambon, Julie Claire Claudia

2011-01-01

impacts have typically been assessed using site-generic characterization models representing a continental scale and excluding the groundwater compartment. Soil contaminants have therefore generally been assigned as emissions to surface soil or surface water compartments. However, such site-generic...... assessments poorly reflect the fate of frequent soil contaminants such as chloroethenes as they exclude the groundwater compartment and assume that the main part escapes to the atmosphere. Another important limitation of the generic impact assessment models is that they do not include the formation......The environmental impacts from remediation can be divided into primary and secondary impacts. Primary impacts cover the local impacts associated with the on-site contamination, whereas the secondary impacts are impacts on the local, regional and global scale generated by the remediation activities...

Quantifying "apparent" impact and distinguishing impact from invasiveness in multispecies plant invasions

Science.gov (United States)

Dean E. Pearson; Yvette K. Ortega; Ozkan Eren; Jose L. Hierro

2015-01-01

The quantification of invader impacts remains a major hurdle to understanding and managing invasions. Here, we demonstrate a method for quantifying the community-level impact of multiple plant invaders by applying Parker et al.'s (1999) equation (impact = range x local abundance x per capita effect or per unit effect) using data from 620 survey plots from 31...

Virtual impact: visualizing the potential effects of cosmic impact in human history

Energy Technology Data Exchange (ETDEWEB)

Masse, W Bruce [Los Alamos National Laboratory; Janecky, David R [Los Alamos National Laboratory; Forte, Maurizio [UC MERCED; Barrientos, Gustavo [UNIV OF LA PLATA, ARG.

2009-01-01

Current models indicate that catastrophic impacts by asteroids and comets capable of killing more than one quarter of Earth's human population have occurred on average once every million years; smaller impacts, such the 1908 Tunguska impact that leveled more than 2,000 square km of Siberian forest, occur every 200-300 years. Therefore, cosmic impact likely significantly affected hominine evolution and conceivably played a role in Holocene period human culture history. Regrettably, few archaeologists are trained to appreciate the nature and potential effects of cosmic impact. We have developed a conceptual model for an extensible set of educational and research tools based on virtual reality collaborative environments to engage archaeologists and the general public on the topic of the role of cosmic impact in human history. Our initial focus is on two documented asteroid impacts in Argentina during the period of 4000 to 1000 B.C. Campo del Cicio resulted in an energy release of around 2-3 megatons (100-150 times the Hiroshima atomic weapon), and left several craters and a strewn field covering 493 km{sup 2} in northeastern Argentina. Rio Cuarto was likely more than 1000 megatons and may have devastated an area greater than 50,000 km{sup 2} in central Argentina. We are focusing on reconstructions of these events and their potential effects on contemporary hunter and gatherers. Our vinual reality tools also introduce interactive variables (e.g., impactor physical properties, climate, vegetation, topography, and social complexity) to allow researchers and students to better investigate and evaluate the factors that significantly influence cosmic impact effects.

Impact studies at Winfrith

International Nuclear Information System (INIS)

Cooper, C.A.; Wicks, S.J.

1987-02-01

Analytical and experimental studies of subsonic impacts on nuclear reactor plant structures have been in progress at Winfrith since 1977. These studies have examined the behaviour of concrete and metal structures under the impact of missiles typifying those derived either from the plant itself or from external sources, such as crashing aircraft. During 1986 the Winfrith programme was expanded to include studies of the behaviour of radioactive materials transport containers under impact conditions. This report initially describes the experimental facilities available for impact studies at Winfrith. These include both compressed air guns, capable of delivering payloads of up to 65 kg at sonic velocity or payloads up to 2 tonnes at speeds up to 45 ms -1 , and drop test facilities for impact testing of models, up to full-scale radioactive materials transport flasks, at relatively low speeds. Supporting facilities include a small concrete manufacturing laboratory to produce concrete targets. Assessments of the resistance of concrete or metal structures to impact damage are performed using empirical or semi-empirical correlations, derived from data obtained in well-characterised experiments, or using structural dynamics finite element codes. The codes used by the analysts and the computing facilities available for impact analysis work are described. Finally the current programme of impact studies is reviewed, recent progress is summarised and future plans outlined. (author)

Scientific impact: opportunity and necessity.

Science.gov (United States)

Cohen, Marlene Z; Alexander, Gregory L; Wyman, Jean F; Fahrenwald, Nancy L; Porock, Davina; Wurzbach, Mary E; Rawl, Susan M; Conn, Vicki S

2010-08-01

Recent National Institutes of Health changes have focused attention on the potential scientific impact of research projects. Research with the excellent potential to change subsequent science or health care practice may have high scientific impact. Only rigorous studies that address highly significant problems can generate change. Studies with high impact may stimulate new research approaches by changing understanding of a phenomenon, informing theory development, or creating new research methods that allow a field of science to move forward. Research with high impact can transition health care to more effective and efficient approaches. Studies with high impact may propel new policy developments. Research with high scientific impact typically has both immediate and sustained influence on the field of study. The article includes ideas to articulate potential scientific impact in grant applications as well as possible dissemination strategies to enlarge the impact of completed projects.

Einstein: His Impact on Accelerators; His Impact on the World

International Nuclear Information System (INIS)

Sessler, A.

2005-01-01

The impact of the work of Albert Einstein on accelerator physics is described. Because of the limit of time, and also because the audience knows the details, the impact is described in broad strokes. Nevertheless, it is seen how his work has affected many different aspects of accelerator physics. In the second half of the talk, Albert Einstein's impact on the world will be discussed; namely his work on world peace (including his role as a pacifist, in the atomic bomb, and in arms control) and his efforts as a humanitarian (including his efforts on social justice, anti-racism, and civil rights)

Einstein His Impact on Accelerators; His Impact on the World

CERN Document Server

Sessler, Andrew M

2005-01-01

The impact of the work of Albert Einstein on accelerator physics is described. Because of the limit of time, and also because the audience knows the details, the impact is described in broad strokes. Nevertheless, it is seen how his work has affected many different aspects of accelerator physics. In the second half of the talk, Albert Einstein's impact on the world will be discussed; namely his work on world peace (including his role as a pacifist, in the atomic bomb, and in arms control) and his efforts as a humanitarian (including his efforts on social justice, anti-racism, and civil rights).

Economic impacts study

Energy Technology Data Exchange (ETDEWEB)

Brunsen, W.; Worley, W.; Frost, E.

1988-09-30

This is a progress report on the first phase of a project to measure the economic impacts of a rapidly changing U.S. target base. The purpose of the first phase is to designate and test the macroeconomic impact analysis model. Criteria were established for a decision-support model. Additional criteria were defined for an interactive macroeconomic impact analysis model. After a review of several models, the Economic Impact Forecast System model of the U.S. Army Construction Research Laboratory was selected as the appropriate input-output tool that can address local and regional economic analysis. The model was applied to five test cases to demonstrate its utility and define possible revisions to meet project criteria. A plan for EIFS access was defined at three levels. Objectives and tasks for scenario refinement are proposed.

Community impact management

International Nuclear Information System (INIS)

Baril, R.G.

1983-01-01

Industrial expansion, whether for resource extraction, refining, production or distribution and particularly the construction of energy facilities, usually has many effects on communities. In the early 1970s, as more experience was gained with large projects and as communities became more sensitive to their needs and rights, the negative effects of projects gained some prominence. Communities questioned whether it was in their best interest to accept changes that large corporations would impose on them. It is in this context that Ontario Hydro, in 1977, set up the first of four community impact agreements for the construction of generating stations. This paper discusses these community impact agreements and how they have become the framework for the management of community impacts. Also, the paper discusses a model for compensating social impacts

Community Impacts

DEFF Research Database (Denmark)

Hansen, Anne Merrild

Baggrundspapiret har fokus på samfundsmæssige konsekvenser og afledte effekter af råstofprojekter i Grønland. Papiret fokuserer på de forskellige faser for råstofprojekter og gennemgår de formelle krav og metoder, der anvendes til vurdering af råstoffernes effekter på samfundet i Grønland i dag: ......: Social Impact Assessment (SIA) og Impact Benefit Agreement (IBA)....

Environmental impact assessment of NPP decommissioning

International Nuclear Information System (INIS)

Hinca, R.

2009-01-01

In this presentation the following potential impacts of decommissioning of NPP are discussed: - Impacts on population; Impacts on natural environment; Land impacts; Impacts on urban complex and land utilisation; Possible impacts on area as a result of failure.

Design for aircraft impact

International Nuclear Information System (INIS)

Kar, A.K.

1978-01-01

Aircraft impact against nuclear power plant structures leads to both local and overall effects on the structure. Among the local effects, backface spalling is most important. The overall effects of impact on structural stability are commonly evaluated in terms of the adequacy of the structure in flexure and shear. Empirical formulas are presented for the determination of local effects of aircraft impact on nuclear power plant facilities. The formulas lead to easy and reasonable estimates of the thickness required to prevent backface spalling. The impactive load depends upon the collapse load of the fuselage, its collapse mechanism, mass distribution and the impact velocity. A simplified method is given for evaluating the design load. The time history, obtained by the proposed method, closely resembles those obtained by more rigorous methods. Procedures for obtaining shear and flexural strengths of concrete walls or roofs, subjected to impact, are provided. The span-to-depth ratio is considered. Recommendations are made on the available ductility ratio and structural behavior. (Author)

Root Length and Anatomy of Impacted Maxillary Canines in Patients with Unilateral Maxillary Canine Impaction

Directory of Open Access Journals (Sweden)

Mostfa Shahabi

2017-09-01

Full Text Available Introduction: Canine impaction is a common occurrence. In this study, we sought to investigate the root anatomy and length of impacted canines and lateral incisor adjacent to impacted maxillary canine. Materials and Methods: In this retrospective study, three-dimensional tomographic imaging was performed on 26 patients with unilateral maxillary canine impaction. In this study, we evaluated root length and anatomy of impacted canines, in terms of resorption intensity and curvature, with Planmeca Romexis Viewer 4.0. Furthermore, crown shape as well as root length and anatomy of the lateral incisors adjacent to impacted canines were investigated and compared with the other side on the dental arch, where canine eruption was normal. Results: Root length of impacted canines was significantly lower than that of normal canines (P=0.011. There were no significant differences between root length of lateral incisors adjacent to impacted canines and root length of lateral incisors adjacent to normal canines (P=0.221. Moreover, the resorption intensity of the adjacent lateral incisors was higher than that of the impacted canines. No significant differences were noted in root resorption intensity between the lateral incisors adjacent to the imacted canines and the lateral incisors adjacent to normal canines (P=0.36. In addition, resorption intensity was significantly higher in impacted canines than in normal canines (P=0.024. Root anatomy of impacted canines was not significantly different from that of normal canines (P=0.055. The crown shape of the lateral incisors adjacent to impacted canines was not significantly different from that of the lateral incisors adjacent to normal canines (P=0.052. Conclusion: Impaction can probably affect root length and canine resorption severity. However, root and crown shape of lateral incisors cannot always be associated with canine impaction.

Hypervelocity impact cratering calculations

Science.gov (United States)

Maxwell, D. E.; Moises, H.

1971-01-01

A summary is presented of prediction calculations on the mechanisms involved in hypervelocity impact cratering and response of earth media. Considered are: (1) a one-gram lithium-magnesium alloys impacting basalt normally at 6.4 km/sec, and (2) a large terrestrial impact corresponding to that of Sierra Madera.

Impact significance determination-Back to basics

International Nuclear Information System (INIS)

Lawrence, David P.

2007-01-01

Impact significance determination is widely recognized as a vital and critical EIA activity. But impact significance related concepts are poorly understood. And the quality of approaches for impact significance determination in EIA practice remains highly variable. This article seeks to help establish a sound and practical conceptual foundation for formulating and evaluating impact significance determination approaches. It addresses the nature (what is impact significance?), the core characteristics (what are the major properties of significance determination?), the rationale (why are impact significance determinations necessary?), the procedural and substantive objectives (what do impact significance determinations seek to achieve?), and the process for making impact significance judgments (how is impact significance determination conducted?). By identifying fundamental attributes and key distinctions associated with impact significance determinations, a basis is provided for designing and evaluating impact significance determination procedures at both the regulatory and applied levels

Socioeconomic impacts of repositories

International Nuclear Information System (INIS)

Thomas, J.K.; Hamm, R.R.; Murdock, S.H.

1983-01-01

Federal and state decision makers, community leaders, and residents must know how communities will be changed by the impacts of a high-level nuclear waste repository. This chapter identifies the factors affecting an assessment of socioeconomic impacts and the types of impacts (economic, demographic, fiscal, community service, and social) likely to occur as a result of repository development. Each of these types can be divided into standard (those which typically results from any large-scale development) and special impact categories (those which result from the fact that radioactive materials will be handled). 3 tables

Einstein: His Impact on Accelerators; His Impact on theWorld

Energy Technology Data Exchange (ETDEWEB)

Sessler, A.

2005-07-30

The impact of the work of Albert Einstein on accelerator physics is described. Because of the limit of time, and also because the audience knows the details, the impact is described in broad strokes. Nevertheless, it is seen how his work has affected many different aspects of accelerator physics. In the second half of the talk, Albert Einstein's impact on the world will be discussed; namely his work on world peace (including his role as a pacifist, in the atomic bomb, and in arms control) and his efforts as a humanitarian (including his efforts on social justice, anti-racism, and civil rights).

The environmental Impacts of tobaccos

International Nuclear Information System (INIS)

Shah, J.; Sohail, N.

2006-01-01

Tobacco is an important cash crop in Pakistan. It is a sensitive plant, prone to bacterial, fungal and viral diseases. Therefore, high levels of pesticides are used to grow tobacco. Many of these pesticides are highly toxic and have profound impacts not only on the smokers but also on the lives of tobacco farmers, their families and the environment. The environmental impacts of tobacco crop start right from its seedlings stage till throwing away of cigarette filters. These impacts are divided into three stages: (a) Environmental impacts at the tobacco growing stage, (b) Environmental impacts at tobacco manufacturing/processing stage, and (c) Environmental impacts of the tobacco use. This paper provides information of environmental impacts of tobacco crop at all the above-mentioned three stages and recommends measures for mitigation. (author)

Post-impact performance of composites; Predicting Compression after Impact (CAI) in composite laminates

NARCIS (Netherlands)

Esrall, F.

2013-01-01

Impact damage has been known to seriously limit the performance of composite aircraft structures. In the preliminary design phase, tens of thousands of subparts need to be analyzed for impact. Over the years, many approaches have been proposed to study the creation of impact damage and to determine

Isotope Fuels Impact Tester (IFIT)

International Nuclear Information System (INIS)

Frantz, C.E.; Taylor, J.W.; Court, D.B.

1975-07-01

The Isotope Fuels Impact Tester (IFIT) is used for safely impacting 238 PuO 2 heat sources that have been heated to 2000 0 C. Impact velocities reach 300 m/s (1000 ft/s). A gas gun with a 178-mm (7-in.) bore is used to accelerate the heat source, which is heated by a furnace built into the projectile. Double containment of the impacted heat source is obtained by two vessels that are sealed directly to the gun muzzle. The impact occurs in the inner vessel, and parts of the projectile jam into and thereby close each vessel. The inner vessel, containing the impacted heat source, is removed from the gun and is placed inside a glovebox for disassembly and heat-source recovery. IFIT's modular structure makes it versatile and adaptable to many types of tests. Many applications have demonstrated its versatility and, more important, its capability for impacting 238 PuO 2 heat sources safely. An approximate theoretical relation is used to predict proper conditions for achieving desired impact velocities. Bore lubricants and projectile-seal design are also important for achieving proper impact velocities

The Winfrith horizontal impact rig

International Nuclear Information System (INIS)

Barr, P.

1985-12-01

The Horizontal Impact Rig has been designed to allow studies of the impact of radioactive material transport containers and their associated transport vehicles and impact limiters, using large scale models, and to allow physically large missiles to be projected for studying the impact behaviour of metal and concrete structures. It provides an adequately rigid support structure for impact experiments with targets of large dimensions. Details of its design, instrumentation, performance prediction and construction are given. (U.K.)

Maxillary canine impactions related to impacted central incisors: two case reports.

Science.gov (United States)

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by

Root Length and Anatomy of Impacted Maxillary Canines in Patients with Unilateral Maxillary Canine Impaction

OpenAIRE

Mostfa Shahabi; Maryam Omidkhoda; Seyedeh Haniyeh Omidi; Seyed Hosein Hoseini Zarch

2017-01-01

Introduction: Canine impaction is a common occurrence. In this study, we sought to investigate the root anatomy and length of impacted canines and lateral incisor adjacent to impacted maxillary canine. Materials and Methods: In this retrospective study, three-dimensional tomographic imaging was performed on 26 patients with unilateral maxillary canine impaction. In this study, we evaluated root length and anatomy of impacted canines, in terms of resorption intensity and curvature, with Planme...

Impact significance determination-Pushing the boundaries

International Nuclear Information System (INIS)

Lawrence, David P.

2007-01-01

Impact significance determination practice tends to be highly variable. Too often insufficient consideration is given to good practice insights. Also, impact significance determinations are frequently narrowly defined addressing, for example, only individual, negative impacts, focusing on bio-physical impacts, and not seeking to integrate either the Precautionary Principle or sustainability. This article seeks to extend the boundaries of impact significance determination practice by providing an overview of good general impact significance practices, together with stakeholder roles and potential methods for addressing significance determination challenges. Relevant thresholds, criteria, contextual considerations and support methods are also highlighted. The analysis is then extended to address how impact significance determination practices change for positive as compared with negative impacts, for cumulative as compared with individual impacts, for socio-economic as compared with bio-physical impacts, when the Precautionary Principle is integrated into the process, and when sustainability contributions drive the EIA process and related impact significance determinations. These refinements can assist EIA practitioners in ensuring that the scope and nature of impact significance determinations reflect the broadened scope of emerging EIA requirements and practices. Suggestions are included for further refining and testing of the proposed changes to impact significance determination practice

Direct evidence for impact winter following the Cretaceous-Paleogene bolide impact

Science.gov (United States)

Vellekoop, J.; Sluijs, A.; Smit, J.; Schouten, S.; Sinninghe Damsté, J. S.; Brinkhuis, H.

2012-12-01

The Cretaceous/Paleogene (K/Pg) boundary, ~65.5 Ma, marks a mass-extinction event related the impact of a large asteroid on the Yucatan peninsula, Mexico. Model scenarios predict that the explosive injection of dust and sulfate aerosols into the stratosphere blocked incoming solar radiation, resulting in a cooling pulse of months to several decades, a so-called 'impact winter', but thus far, proxy records lack sufficient resolution to evaluate this hypothesis. We report on a major, short-lived drop in sea surface temperatures (SSTs) recorded in an unusually well preserved and stratigraphically expanded K/Pg boundary site in Texas, USA, based on TEX86 paleothermometry. Critically, the cooling directly post-dates impact-related tsunami deposits, and coincides with the deposition of extraterrestrial iridium representing aerosol fall out, restricting the age of the cooling to the first months to decades after impact. We interpret this cooling to reflect the first direct evidence for the "impact winter" at the K/Pg boundary. The combination of darkness and cooling must have been a key contributory element in the extinctions of many biological clades, including the dinosaurs, flying reptiles and marine reptiles.

Impact cratering on granular beds: From the impact of raindrops to the strike of hailstones

Science.gov (United States)

Gordillo, Leonardo; Wang, Junping; Japardi, Fred; Teddy, Warren; Gao, Ming; Cheng, Xiang

Impact craters generated by the impact of a spherical object onto a granular bed strongly depend on the material properties of impactors. As an example, impact cratering by liquid drops and by solid spheres exhibits qualitatively different power-law scalings for the size of resulting impact craters. While the basic energy conservation and dimensional analysis provide simple guiding rules, the detailed dynamics governing the relation between these power-law scalings is still far from clear. To analyze the transition between liquid-drop and solid-sphere impact cratering, we investigate impact cratering by liquid drops for a wide range of viscosities over 7 decades. Using high-speed photography and laser profilometry, we delineate the liquid-to-solid transition and show the emergence of the two asymptotic behaviors and their respective power laws. We find that granular avalanches triggered by impacts are crucial in understanding the energy partition between impacted surfaces and impactors, which directly determines the observed scaling relations. A simple model is constructed for the initial stage of the impact that explains the energy partition during crater formation. We ackowledge the support of NSF CAREER DMR-1452180. LG acknowledges fundings from CONICYT/BECAS CHILE 74160007.

LATEGLACIAL BATS FROM THE “M” LAYERS OF THE ARENE CANDIDE CAVE (LIGURIA, ITALY

Directory of Open Access Journals (Sweden)

LEONARDO SALARI

2010-03-01

Full Text Available The Arene Candide Cave (Finale Ligure, Northern Italy is considered one of the most important prehistoric site in Italy. The archaeological excavations conducted by the “Istituto Italiano di Paleontologia Umana” of Rome revealed 3 different horizons: an upper horizon with Holocene human presence dated from the Neolithic to the Byzantine period, and two underlying Pleistocene horizons with Gravettian and Epigravettian lithic artefacts. The stratigraphical sequence of the upper Palaeolithic is divided in two groups of strata separated by a depositional gap: the “P” complex, divided in 13 layers, dated from 25,620 to 18,560 years BP, and the 5 “M” layers dated between 11,750 and 9,980 years BP (14C non-calibrated dating.In this paper the fossil bone remains of bats from “M” layers are described. Fifteen taxa, divided into 3 families and 6 genera have been identified: Rhinolophus ferrumequinum, R. mehelyi, R. euryale, R. hipposideros, Myotis myotis, M. blythii, M. capaccinii, M. emarginatus, M. mystacinus s.l., Myotis sp. (small sized, Plecotus auritus s.l., Nyctalus lasiopterus, N. noctula, Barbastella barbastellus and Miniopterus schreibersii. Comments for each of these taxa on current ecological and geographical distributions are presented, together with some osteometric measures and recent data referred to Late Pleistocene fossils bats in Italy. Finally, the value of this bat tanathocoenoses as a microclimatic, environmental, and human activity indicators is discussed. SHORT NOTE

Sense-making and Impact Assessment

DEFF Research Database (Denmark)

Lyhne, Ivar

The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts.......The poster integrates knowledge about how we make sense of situations into SEA methodology to strengthen the staging of impact assessments and the process of scoping impacts....

Presencia de hongos micorrízicos arbusculares (HMA en especies representativas del bosque seco tropical del litoral ecuatoriano

Directory of Open Access Journals (Sweden)

Ivette Chiquito Noboa

2018-02-01

Full Text Available Los hongos micorrízicos arbusculares (HMA son microorganismos que mantienen una relación simbiótica mutualista con las raíces de las plantas. El bosque seco tropical contiene abundantes especies de interés silvícola, sin embargo, en Ecuador se desconoce las relaciones simbióticas de los HMA con los árboles que representan el bosque seco. El propósito de este estudio fue aislar e identificar la presencia de HMA en determinadas especies vegetales de este nicho ecológico del Ecuador. Las muestras de suelo y raíces se recolectaron en la época húmeda entre los meses de marzo y abril del 2017. Los porcentajes de micorrización encontrados fueron los siguientes: Cochlospermun vitifolium (Bototillo 80.8%, Triplaris cumingiana (Fernán Sánchez 71.7%, Albizia multiflora (Compoño 70.0%, Tecoma castanifolia (Moyuyo de montaña 68.6%, Bursera graveolens (Palo Santo 68.3%, Sapindus saponaria (Jaboncillo 67.5%, Croton wagneri (Purga 65.0%, Ceiba trichistandra (Ceibo 62.2%. Todas las plantas muestreadas presentaron una densidad media de esporas por 100 gr de suelo, pero Triplaris cumingiana (Fernán Sánchez obtuvo una mayor esporulación a pesar de presentar la misma densidad media.

Non-Edible Plant Oils as New Sources for Biodiesel Production

Directory of Open Access Journals (Sweden)

M. Rafiqul Islam

2008-02-01

Full Text Available Due to the concern on the availability of recoverable fossil fuel reserves and the environmental problems caused by the use those fossil fuels, considerable attention has been given to biodiesel production as an alternative to petrodiesel. However, as the biodiesel is produced from vegetable oils and animal fats, there are concerns that biodiesel feedstock may compete with food supply in the long-term. Hence, the recent focus is to find oil bearing plants that produce non-edible oils as the feedstock for biodiesel production. In this paper, two plant species, soapnut (Sapindus mukorossi and jatropha (jatropha curcas, L. are discussed as newer sources of oil for biodiesel production. Experimental analysis showed that both oils have great potential to be used as feedstock for biodiesel production. Fatty acid methyl ester (FAME from cold pressed soapnut seed oil was envisaged as biodiesel source for the first time. Soapnut oil was found to have average of 9.1% free FA, 84.43% triglycerides, 4.88% sterol and 1.59% others. Jatropha oil contains approximately 14% free FA, approximately 5% higher than soapnut oil. Soapnut oil biodiesel contains approximately 85% unsaturated FA while jatropha oil biodiesel was found to have approximately 80% unsaturated FA. Oleic acid was found to be the dominant FA in both soapnut and jatropha biodiesel. Over 97% conversion to FAME was achieved for both soapnut and jatropha oil.

The Effects of Climate Change on the Development of Tree Plantations for Biodiesel Production in China

Directory of Open Access Journals (Sweden)

Guanghui Dai

2017-06-01

Full Text Available Biodiesel produced from woody oil plants is a promising form of renewable energy but a combination of tree plantations’ long cultivation time and rapid climate change may put large-scale production at risk. If plantations are located in future-unsuitable places, plantations may fail or yield may be poor, then significant financial, labor, and land resources invested in planting programs will be wasted. Incorporating climate change information into the planning and management of forest-based biodiesel production therefore can increase its chances of success. However, species distribution models, the main tool used to predict the influence of future climate–species distribution modeling, often contain considerable uncertainties. In this study we evaluated how these uncertainties could affect the assessment of climate suitability of the long-term development plans for forest-based biodiesel in China by using Sapindus mukorossi Gaertn as an example. The results showed that only between 59% and 75% of the planned growing areas were projected suitable habitats for the species, depending on the set-up of simulation. Our results showed the necessity for explicitly addressing the uncertainty of species distribution modeling when using it to inform forest-based bioenergy planning. We also recommend the growing area specified in China’s national development plan be modified to lower the risk associated with climate change.

Writing for Impact

DEFF Research Database (Denmark)

Meier, Ninna

2016-01-01

Academic work may have impact in a variety of ways, depending on purpose, audience and field, but this is most likely to happen when your work resonates in meaningful ways with people. Ninna Meier encourages a more systematic investigation of the role of writing in achieving impact. Impact through...... writing means getting your readers to understand and remember your message and leave the reading experience changed. The challenge is to make what you write resonate with an audience’s reservoir of experiential knowledge. If the words do not connect to anything tangible, interest can be quickly lost....

Laboratory Impact Experiments

Science.gov (United States)

Horanyi, M.; Munsat, T.

2017-12-01

The experimental and theoretical programs at the SSERVI Institute for Modeling Plasmas, Atmospheres, and Cosmic Dust (IMPACT) address the effects of hypervelocity dust impacts and the nature of the space environment of granular surfaces interacting with solar wind plasma and ultraviolet radiation. These are recognized as fundamental planetary processes due their role in shaping the surfaces of airless planetary objects, their plasma environments, maintaining dust haloes, and sustaining surface bound exospheres. Dust impacts are critically important for all airless bodies considered for possible human missions in the next decade: the Moon, Near Earth Asteroids (NEAs), Phobos, and Deimos, with direct relevance to crew and mission safety and our ability to explore these objects. This talk will describe our newly developed laboratory capabilities to assess the effects of hypervelocity dust impacts on: 1) the gardening and redistribution of dust particles; and 2) the generation of ionized and neutral gasses on the surfaces of airless planetary bodies.

Impacted material placement plans

International Nuclear Information System (INIS)

Hickey, M.J.

1997-01-01

Impacted material placement plans (IMPP) are documents identifying the essential elements in placing remediation wastes into disposal facilities. Remediation wastes or impacted material(s) are those components used in the construction of the disposal facility exclusive of the liners and caps. The components might include soils, concrete, rubble, debris, and other regulatory approved materials. The IMPP provides the details necessary for interested parties to understand the management and construction practices at the disposal facility. The IMPP should identify the regulatory requirements from applicable DOE Orders, the ROD(s) (where a part of a CERCLA remedy), closure plans, or any other relevant agreements or regulations. Also, how the impacted material will be tracked should be described. Finally, detailed descriptions of what will be placed and how it will be placed should be included. The placement of impacted material into approved on-site disposal facilities (OSDF) is an integral part of gaining regulatory approval. To obtain this approval, a detailed plan (Impacted Material Placement Plan [IMPP]) was developed for the Fernald OSDF. The IMPP provides detailed information for the DOE, site generators, the stakeholders, regulatory community, and the construction subcontractor placing various types of impacted material within the disposal facility

Measuring scientific impact beyond academia: An assessment of existing impact metrics and proposed improvements.

Science.gov (United States)

Ravenscroft, James; Liakata, Maria; Clare, Amanda; Duma, Daniel

2017-01-01

How does scientific research affect the world around us? Being able to answer this question is of great importance in order to appropriately channel efforts and resources in science. The impact by scientists in academia is currently measured by citation based metrics such as h-index, i-index and citation counts. These academic metrics aim to represent the dissemination of knowledge among scientists rather than the impact of the research on the wider world. In this work we are interested in measuring scientific impact beyond academia, on the economy, society, health and legislation (comprehensive impact). Indeed scientists are asked to demonstrate evidence of such comprehensive impact by authoring case studies in the context of the Research Excellence Framework (REF). We first investigate the extent to which existing citation based metrics can be indicative of comprehensive impact. We have collected all recent REF impact case studies from 2014 and we have linked these to papers in citation networks that we constructed and derived from CiteSeerX, arXiv and PubMed Central using a number of text processing and information retrieval techniques. We have demonstrated that existing citation-based metrics for impact measurement do not correlate well with REF impact results. We also consider metrics of online attention surrounding scientific works, such as those provided by the Altmetric API. We argue that in order to be able to evaluate wider non-academic impact we need to mine information from a much wider set of resources, including social media posts, press releases, news articles and political debates stemming from academic work. We also provide our data as a free and reusable collection for further analysis, including the PubMed citation network and the correspondence between REF case studies, grant applications and the academic literature.

Measuring scientific impact beyond academia: An assessment of existing impact metrics and proposed improvements.

Directory of Open Access Journals (Sweden)

James Ravenscroft

Full Text Available How does scientific research affect the world around us? Being able to answer this question is of great importance in order to appropriately channel efforts and resources in science. The impact by scientists in academia is currently measured by citation based metrics such as h-index, i-index and citation counts. These academic metrics aim to represent the dissemination of knowledge among scientists rather than the impact of the research on the wider world. In this work we are interested in measuring scientific impact beyond academia, on the economy, society, health and legislation (comprehensive impact. Indeed scientists are asked to demonstrate evidence of such comprehensive impact by authoring case studies in the context of the Research Excellence Framework (REF. We first investigate the extent to which existing citation based metrics can be indicative of comprehensive impact. We have collected all recent REF impact case studies from 2014 and we have linked these to papers in citation networks that we constructed and derived from CiteSeerX, arXiv and PubMed Central using a number of text processing and information retrieval techniques. We have demonstrated that existing citation-based metrics for impact measurement do not correlate well with REF impact results. We also consider metrics of online attention surrounding scientific works, such as those provided by the Altmetric API. We argue that in order to be able to evaluate wider non-academic impact we need to mine information from a much wider set of resources, including social media posts, press releases, news articles and political debates stemming from academic work. We also provide our data as a free and reusable collection for further analysis, including the PubMed citation network and the correspondence between REF case studies, grant applications and the academic literature.

The Wells Creek Meteorite Impact Site and Changing Views on Impact Cratering

Science.gov (United States)

Ford, J. R. H.; Orchiston, Wayne; Clendening, Ron

2012-11-01

Wells Creek is a confirmed meteorite impact site in Tennessee, USA. The Wells Creek structure was first noticed by railroad surveyors around 1855 and brought to the attention of J.M. Safford, Tennessee's State Geologist. He included an insert in the 1869 Geologic Map of Tennessee, which is the first known map to include the structure. The origin of the Wells Creek structure was controversial, and was interpreted as being either the result of volcanic steam explosion or meteorite impact. It was only in the 1960s that Wilson and Stearns were able to state that the impact hypothesis was preferred. Evidence for a Wells Creek meteorite impact includes drill core results, extreme brecciation and shatter cones, while a local lack of volcanic material is telling. Just to the north of the Wells Creek Basin are three small basins that Wilson concluded were associated with the Wells Creek impact event, but evidence regarding the origin of the Austin, Indian Mound and Cave Spring Hollow sites is not conclusive.

10 CFR 51.29 - Scoping-environmental impact statement and supplement to environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Scoping-environmental impact statement and supplement to environmental impact statement. 51.29 Section 51.29 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED... Environmental Policy Act-Regulations Implementing Section 102(2) Scoping § 51.29 Scoping-environmental impact...

Impact structures in Africa: A review

Science.gov (United States)

Reimold, Wolf Uwe; Koeberl, Christian

2014-01-01

More than 50 years of space and planetary exploration and concomitant studies of terrestrial impact structures have demonstrated that impact cratering has been a fundamental process – an essential part of planetary evolution – ever since the beginning of accretion and has played a major role in planetary evolution throughout the solar system and beyond. This not only pertains to the development of the planets but to evolution of life as well. The terrestrial impact record represents only a small fraction of the bombardment history that Earth experienced throughout its evolution. While remote sensing investigations of planetary surfaces provide essential information about surface evolution and surface processes, they do not provide the information required for understanding the ultra-high strain rate, high-pressure, and high-temperature impact process. Thus, hands-on investigations of rocks from terrestrial impact craters, shock experimentation for pressure and temperature calibration of impact-related deformation of rocks and minerals, as well as parameter studies pertaining to the physics and chemistry of cratering and ejecta formation and emplacement, and laboratory studies of impact-generated lithologies are mandatory tools. These, together with numerical modeling analysis of impact physics, form the backbone of impact cratering studies. Here, we review the current status of knowledge about impact cratering – and provide a detailed account of the African impact record, which has been expanded vastly since a first overview was published in 1994. No less than 19 confirmed impact structures, and one shatter cone occurrence without related impact crater are now known from Africa. In addition, a number of impact glass, tektite and spherule layer occurrences are known. The 49 sites with proposed, but not yet confirmed, possible impact structures contain at least a considerable number of structures that, from available information, hold the promise to be able to

10 CFR 51.93 - Distribution of final environmental impact statement and supplement to final environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of final environmental impact statement and supplement to final environmental impact statement; news releases. 51.93 Section 51.93 Energy NUCLEAR... Environmental Impact Statements-General Requirements § 51.93 Distribution of final environmental impact...

Roentgenographical observation of impacted teeth

Energy Technology Data Exchange (ETDEWEB)

Choi, Hi Sup; Ahn, Hyung Kyu [College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

1972-11-15

The author observed on the impacted teeth of 11 cases from 484 full-mouth roentgenograms of dental students S.N.U. (except 3rd molar). These studies are very significant in oral surgery and orthodontic problems. Most of the impacted teeth are located in maxilla and among them 7 cases are impacted central incisors the others are lateral incisors, and cuspids. The form of impactions are vertical, horizontal and inverted positions.

Centrifuge Impact Cratering Experiments

Science.gov (United States)

Schmidt, R. M.; Housen, K. R.; Bjorkman, M. D.

1985-01-01

The kinematics of crater growth, impact induced target flow fields and the generation of impact melt were determined. The feasibility of using scaling relationships for impact melt and crater dimensions to determine impactor size and velocity was studied. It is concluded that a coupling parameter determines both the quantity of melt and the crater dimensions for impact velocities greater than 10km/s. As a result impactor radius, a, or velocity, U cannot be determined individually, but only as a product in the form of a coupling parameter, delta U micron. The melt volume and crater volume scaling relations were applied to Brent crater. The transport of melt and the validity of the melt volume scaling relations are examined.

10 CFR 51.74 - Distribution of draft environmental impact statement and supplement to draft environmental impact...

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement and supplement to draft environmental impact statement; news releases. 51.74 Section 51.74 Energy NUCLEAR... Impact Statements § 51.74 Distribution of draft environmental impact statement and supplement to draft...

Impact-limiting materials characterization

International Nuclear Information System (INIS)

Glass, R.E.; Duffey, T.A.; McConnell, P.

1993-01-01

Three types of impact-limiting materials have been characterized which have applications in packages for the transport of radioactive materials. These materials are aluminum honeycombs, polyurethane foams, and aluminum foams. The results of the materials characterization have indicated strengths and weaknesses for each type of material. The polyurethane foams provide good impact limiting ability and excellent thermal insulation. However, they burn when subjected to the regulatory thermal event in the presence of air. The aluminum honeycombs provide excellent impact resistance in specific impact orientations. However, they provide relatively poor resistance to thermal assault. Finally, the aluminum foams exhibit relatively poor impact energy absorption capacities, significant variability in energy absorption, and limited thermal insulation. The development of the figures of merit examined the response of the materials to the impact event with the intent of maximizing the energy absorption of the materials with respect to either the volume or mass of the materials. Three figures of merit will be presented for the structural response. The figure of merit for the thermal event is based on minimizing the heat flux to the containment boundary. The paper presents a discussion of the test methods, a summary of the data and the figures of merit for each material. (J.P.N.)

Sloshing impact in roofed tanks

International Nuclear Information System (INIS)

Uras, R.A.

1995-01-01

A large number of high-level waste (HLW) storage tanks exists in various tank farms. Seismic activities at those locations may cause significant sloshing in HLW tanks. These tanks are covered to avoid any spilling during large amplitude earthquakes. However, large amplitude sloshing may result in impact on the cover or the roof of the tank. Hence, a better understanding of the impact phenomenon is necessary to assess the safety of the tanks currently in existence, and to establish design guidelines for future designs. A pressure based formulation is derived to model sloshing impact in roared tanks. It is incorporated into Argonne's in-house finite element code FLUSTR-ANL. A numerical test case with a harmonic input excitation is studied. The simulation results indicate that linear behavior is preserved beyond the first impact, and some mesh distortion is observed following a stronger second impact. During the impact, the displacement of the contacting surface nodes remains constant, and the velocities are reduced to zero. An identification of impacting nodes is possible from the dynamic pressures induced in surface elements

Sloshing impact in roofed tanks

International Nuclear Information System (INIS)

Uras, R.A.

1995-01-01

A large number of high-level waste (HLW) storage tanks exists in various tank farms. Seismic activities at those locations may cause significant sloshing in HLW tanks. These tanks are covered to avoid any spilling during large amplitude earthquakes. However, large amplitude sloshing may result in impact on the cover or the roof of the tank. Hence, a better understanding of the impact phenomenon is necessary to assess the safety of the tanks currently in existence, and to establish design guidelines for future designs. A pressure based formulation is derived to model sloshing impact in roofed tanks. It is incorporated into Argonne's in-house finite element code FLUSTR-ANL. A numerical test case with a harmonic input excitation is studied. The simulation results indicate that linear behavior is preserved beyond the first impact, and some mesh distortion is observed following a stronger second impact. During the impact, the displacement of the contacting surface nodes remains constant, and the velocities are reduced to zero. An identification of impacting nodes is possible from the dynamic pressures induced in surface elements

Experimental impact crater morphology

Science.gov (United States)

Dufresne, A.; Poelchau, M. H.; Hoerth, T.; Schaefer, F.; Thoma, K.; Deutsch, A.; Kenkmann, T.

2012-04-01

The research group MEMIN (Multidisciplinary Experimental and Impact Modelling Research Network) is conducting impact experiments into porous sandstones, examining, among other parameters, the influence of target pore-space saturation with water, and projectile velocity, density and mass, on the cratering process. The high-velocity (2.5-7.8 km/s) impact experiments were carried out at the two-stage light-gas gun facilities of the Fraunhofer Institute EMI (Germany) using steel, iron meteorite (Campo del Cielo IAB), and aluminium projectiles with Seeberg Sandstone as targets. The primary objectives of this study within MEMIN are to provide detailed morphometric data of the experimental craters, and to identify trends and characteristics specific to a given impact parameter. Generally, all craters, regardless of impact conditions, have an inner depression within a highly fragile, white-coloured centre, an outer spallation (i.e. tensile failure) zone, and areas of arrested spallation (i.e. spall fragments that were not completely dislodged from the target) at the crater rim. Within this general morphological framework, distinct trends and differences in crater dimensions and morphological characteristics are identified. With increasing impact velocity, the volume of craters in dry targets increases by a factor of ~4 when doubling velocity. At identical impact conditions (steel projectiles, ~5km/s), craters in dry and wet sandstone targets differ significantly in that "wet" craters are up to 76% larger in volume, have depth-diameter ratios generally below 0.19 (whereas dry craters are almost consistently above this value) at significantly larger diameters, and their spallation zone morphologies show very different characteristics. In dry craters, the spall zone surfaces dip evenly at 10-20° towards the crater centre. In wet craters, on the other hand, they consist of slightly convex slopes of 10-35° adjacent to the inner depression, and of sub-horizontal tensile

Development of a Spring-Loaded Impact Device to Deliver Injurious Mechanical Impacts to the Articular Cartilage Surface

Science.gov (United States)

Alexander, Peter G.; Song, Yingjie; Taboas, Juan M.; Chen, Faye H.; Melvin, Gary M.; Manner, Paul A.

2013-01-01

Objective: Traumatic impacts on the articular joint surface in vitro are known to lead to degeneration of the cartilage. The main objective of this study was to develop a spring-loaded impact device that can be used to deliver traumatic impacts of consistent magnitude and rate and to find whether impacts cause catabolic activities in articular cartilage consistent with other previously reported impact models and correlated with the development of osteoarthritic lesions. In developing the spring-loaded impactor, the operating hypothesis is that a single supraphysiologic impact to articular cartilage in vitro can affect cartilage integrity, cell viability, sulfated glycosaminoglycan and inflammatory mediator release in a dose-dependent manner. Design: Impacts of increasing force are delivered to adult bovine articular cartilage explants in confined compression. Impact parameters are correlated with tissue damage, cell viability, matrix and inflammatory mediator release, and gene expression 24 hours postimpact. Results: Nitric oxide release is first detected after 7.7 MPa impacts, whereas cell death, glycosaminoglycan release, and prostaglandin E2 release are first detected at 17 MPa. Catabolic markers increase linearly to maximal levels after ≥36 MPa impacts. Conclusions: A single supraphysiologic impact negatively affects cartilage integrity, cell viability, and GAG release in a dose-dependent manner. Our findings showed that 7 to 17 MPa impacts can induce cell death and catabolism without compromising the articular surface, whereas a 17 MPa impact is sufficient to induce increases in most common catabolic markers of osteoarthritic degeneration. PMID:26069650

Does health intervention research have real world policy and practice impacts: testing a new impact assessment tool.

Science.gov (United States)

Cohen, Gillian; Schroeder, Jacqueline; Newson, Robyn; King, Lesley; Rychetnik, Lucie; Milat, Andrew J; Bauman, Adrian E; Redman, Sally; Chapman, Simon

2015-01-01

There is a growing emphasis on the importance of research having demonstrable public benefit. Measurements of the impacts of research are therefore needed. We applied a modified impact assessment process that builds on best practice to 5 years (2003-2007) of intervention research funded by Australia's National Health and Medical Research Council to determine if these studies had post-research real-world policy and practice impacts. We used a mixed method sequential methodology whereby chief investigators of eligible intervention studies who completed two surveys and an interview were included in our final sample (n = 50), on which we conducted post-research impact assessments. Data from the surveys and interviews were triangulated with additional information obtained from documentary analysis to develop comprehensive case studies. These case studies were then summarized and the reported impacts were scored by an expert panel using criteria for four impact dimensions: corroboration; attribution, reach, and importance. Nineteen (38%) of the cases in our final sample were found to have had policy and practice impacts, with an even distribution of high, medium, and low impact scores. While the tool facilitated a rigorous and explicit criterion-based assessment of post-research impacts, it was not always possible to obtain evidence using documentary analysis to corroborate the impacts reported in chief investigator interviews. While policy and practice is ideally informed by reviews of evidence, some intervention research can and does have real world impacts that can be attributed to single studies. We recommend impact assessments apply explicit criteria to consider the corroboration, attribution, reach, and importance of reported impacts on policy and practice. Impact assessments should also allow sufficient time between impact data collection and completion of the original research and include mechanisms to obtain end-user input to corroborate claims and reduce biases

Meteorite impact craters and possibly impact-related structures in Estonia

Science.gov (United States)

Plado, Jüri

2012-10-01

Three structures (Neugrund, Kärdla, and Kaali) of proven impact origin make Estonia the most cratered country in the world by area. In addition, several candidate impact structures exist, waiting for future studies to determine their origin. This article is an overview of these proven and possible impact structures, including some breccia layers. It summarizes the information and descriptions of the morphology; geological characteristics; and mineralogical, chemical, and geophysical data available in the literature. The overview was prepared to make information in many earlier publications in local journals (many of which had been published in Estonian or Russian) accessible to the international community. This review summarizes the facts and observations in a historical fashion, summarizing the current state of knowledge with some additional comments, and providing the references.

Orion Ground Test Article Water Impact Tests: Photogrammetric Evaluation of Impact Conditions

Science.gov (United States)

Vassilakos, Gregory J.; Mark, Stephen D.

2018-01-01

The Ground Test Article (GTA) is an early production version of the Orion Crew Module (CM). The structural design of the Orion CM is being developed based on LS-DYNA water landing simulations. As part of the process of confirming the accuracy of LS-DYNA water landing simulations, the GTA water impact test series was conducted at NASA Langley Research Center (LaRC) to gather data for comparison with simulations. The simulation of the GTA water impact tests requires the accurate determination of the impact conditions. To accomplish this, the GTA was outfitted with an array of photogrammetry targets. The photogrammetry system utilizes images from two cameras with a specialized tracking software to determine time histories for the 3-D coordinates of each target. The impact conditions can then be determined from the target location data.

Complete Impact Factor (CIF: A full index to evaluate journal impact

Directory of Open Access Journals (Sweden)

WenJun Zhang

2015-03-01

Full Text Available In this article, a full index to evaluate journal impact, Complete Impact Factor (CIF, was proposed. In general, CIF= total citations for published articles in the journal since it has been sponsored / total number of published articles of the journal since it has been sponsored. CIF changes dynamically over time.

Investigation on impact resistance of steel plate reinforced concrete barriers against aircraft impact. Pt.2: Simulation analysis of scale model impact tests

International Nuclear Information System (INIS)

Jun Mizuno; Norihide Koshika; Hiroshi Morikawa; Kentaro Wakimoto; Ryusuke Fukuda

2005-01-01

Steel plate reinforced concrete (SC) structure is one in which the rebars of conventional reinforced concrete (RC) structures are replaced with external steel plates attached to inner concrete with headed studs. SC structures are considered to be more effective than RC structures against aircraft impact, so their application to outer walls and roofs of risk-sensitive structures such as nuclear-related structures is expected to mitigate damage to critical components. The objective of this study was to investigate the fracture behavior and perforation thickness of SC panels against aircraft impact through impact tests and simulation analyses. Objectives of this paper are to analytically investigate the protection performance of SC panels against aircraft model impact through simulation analyses of 1/7.5 scale aircraft model impact tests presented in Part 1 of this study using a discrete element method (DEM), and to examine the applicability and validity of the DEM. Simulation analyses by a finite element method (FEM) were also performed to evaluate its applicability. The fracture process and damage to the SC test panels as well as the aircraft models are closely simulated by the discrete element analyses. The various impact responses and failure mechanisms, such as deceleration curves of projectile, velocity of debris from rear face and deformation mode of SC panels, are also simulated closely by the DEM analyses. The results of analyses confirm the shock-proof performance of SC panels against aircraft impact, and the applicability and validity of DEM for evaluating the complex phenomena of an aircraft impact against an SC panel. The finite element analysis closely simulates the deformation of the SC test panel and strains of rear steel plate where the global bending deformation mode is dominant. (authors)

Dams: impacts on the species diversity; Impacts des reservoirs sur la biodiversite

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Domingos de [Quebec Univ., Montreal, PQ (Canada). Dept. de Sciences Biologiques, Inst. de Sciences de l`Environnement

1996-12-31

Always you change one ecosystem, you have impacts on the species diversity. The work try to show some impacts of dams for hydroelectric power generation. First of all the author analyses the impacts on the habitats and ecosystems. He considers the problems on a variety of species, since plants and animals that living on the border of the river until the fishes, birds, invertebrates and the mammals. The example of 3 dams, La Grande, Opinaca and Caniapiseau, on Quebec, Canada, are used to give support to the work 14 refs., 1 tab.

AIDA: Asteroid Impact & Deflection Assessment

Science.gov (United States)

Cheng, A. F.; Galvez, A.; Carnelli, I.; Michel, P.; Rivkin, A.; Reed, C.

2012-12-01

To protect the Earth from a hazardous asteroid impact, various mitigation methods have been proposed, including deflection of the asteroid by a spacecraft impact. AIDA, consisting of two mission elements, the Double Asteroid Redirection Test (DART) and the Asteroid Impact Monitoring (AIM) mission, is a demonstration of asteroid deflection. To date, there has been no such demonstration, and there is major uncertainty in the result of a spacecraft impact onto an asteroid, that is, the amount of deflection produced by a given momentum input from the impact. This uncertainty is in part due to unknown physical properties of the asteroid surface, such as porosity and strength, and in part due to poorly understood impact physics such that the momentum carried off by ejecta is highly uncertain. A first mission to demonstrate asteroid deflection would not only be a major step towards gaining the capability to mitigate an asteroid hazard, but in addition it would return unique information on an asteroid's strength, other surface properties, and internal structure. This information return would be highly relevant to future human exploration of asteroids. We report initial results of the AIDA joint mission concept study undertaken by the Johns Hopkins Applied Physics Laboratory and ESA with support from NASA centers including Goddard, Johnson and Jet Propulsion Laboratory. For AIDA, the DART spacecraft impactor study is coordinated with an ESA study of the AIM mission, which would rendezvous with the same asteroid to measure effects of the impact. Unlike the previous Don Quijote mission study performed by ESA in 2005-2007, DART envisions an impactor spacecraft to intercept the secondary member of a binary near-Earth asteroid. DART includes ground-based observations to measure the deflection independently of the rendezvous spacecraft observations from AIM, which also measures deflection and provides detailed characterization of the target asteroid. The joint mission AIDA

The challenge of cumulative impacts

Energy Technology Data Exchange (ETDEWEB)

Masden, Elisabeth

2011-07-01

Full text: As governments pledge to combat climate change, wind turbines are becoming a common feature of terrestrial and marine environments. Although wind power is a renewable energy source and a means of reducing carbon emissions, there is a need to ensure that the wind farms themselves do not damage the environment. There is particular concern over the impacts of wind farms on bird populations, and with increasing numbers of wind farm proposals, the concern focuses on cumulative impacts. Individually, a wind farm, or indeed any activity/action, may have minor effects on the environment, but collectively these may be significant, potentially greater than the sum of the individual parts acting alone. Cumulative impact assessment is a legislative requirement of environmental impact assessment but such assessments are rarely adequate restricting the acquisition of basic knowledge about the cumulative impacts of wind farms on bird populations. Reasons for this are numerous but a recurring theme is the lack of clear definitions and guidance on how to perform cumulative assessments. Here we present a conceptual framework and include illustrative examples to demonstrate how the framework can be used to improve the planning and execution of cumulative impact assessments. The core concept is that explicit definitions of impacts, actions and scales of assessment are required to reduce uncertainty in the process of assessment and improve communication between stake holders. Only when it is clear what has been included within a cumulative assessment, is it possible to make comparisons between developments. Our framework requires improved legislative guidance on the actions to include in assessments, and advice on the appropriate baselines against which to assess impacts. Cumulative impacts are currently considered on restricted scales (spatial and temporal) relating to individual development assessments. We propose that benefits would be gained from elevating cumulative

A state-impact-state methodology for assessing environmental impact in land use planning

International Nuclear Information System (INIS)

Chen, Longgao; Yang, Xiaoyan; Chen, Longqian; Potter, Rebecca; Li, Yingkui

2014-01-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level

A state-impact-state methodology for assessing environmental impact in land use planning

Energy Technology Data Exchange (ETDEWEB)

Chen, Longgao [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); Yang, Xiaoyan [Institute of land resources, Jiangsu Normal University, Xuzhou 221116 (China); School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Chen, Longqian, E-mail: cumt_chenlongqian@163.com [School of Environmental Science and Spatial Informatics, China University of Mining and Technology, Xuzhou 221116 (China); Potter, Rebecca; Li, Yingkui [Department of Geography, University of Tennessee, Knoxville, TN 37996 (United States)

2014-04-01

The implementation of land use planning (LUP) has a large impact on environmental quality. There lacks a widely accepted and consolidated approach to assess the LUP environmental impact using Strategic Environmental Assessment (SEA). In this paper, we developed a state-impact-state (SIS) model employed in the LUP environmental impact assessment (LUPEA). With the usage of Matter-element (ME) and Extenics method, the methodology based on the SIS model was established and applied in the LUPEA of Zoucheng County, China. The results show that: (1) this methodology provides an intuitive and easy understanding logical model for both the theoretical analysis and application of LUPEA; (2) the spatial multi-temporal assessment from base year, near-future year to planning target year suggests the positive impact on the environmental quality in the whole County despite certain environmental degradation in some towns; (3) besides the spatial assessment, other achievements including the environmental elements influenced by land use and their weights, the identification of key indicators in LUPEA, and the appropriate environmental mitigation measures were obtained; and (4) this methodology can be used to achieve multi-temporal assessment of LUP environmental impact of County or Town level in other areas. - Highlights: • A State-Impact-State model for Land Use Planning Environmental Assessment (LUPEA). • Matter-element (ME) and Extenics methods were embedded in the LUPEA. • The model was applied to the LUPEA of Zoucheng County. • The assessment shows improving environment quality since 2000 in Zoucheng County. • The method provides a useful tool for the LUPEA in the county level.

Economic Impacts and Business Opportunities | NREL

Science.gov (United States)

Economic Impacts and Business Opportunities Economic Impacts and Business Opportunities NREL corporations alike. Colorado flag Economic Impact The economic impact of NREL operations on the nation totaled Jefferson County where the economic benefit totaled $275 million in 2014. Growth chart Economic Benefit NREL

Health impacts of floods.

Science.gov (United States)

Du, Weiwei; FitzGerald, Gerard Joseph; Clark, Michele; Hou, Xiang-Yu

2010-01-01

Floods are the most common hazard to cause disasters and have led to extensive morbidity and mortality throughout the world. The impact of floods on the human community is related directly to the location and topography of the area, as well as human demographics and characteristics of the built environment. The aim of this study is to identify the health impacts of disasters and the underlying causes of health impacts associated with floods. A conceptual framework is developed that may assist with the development of a rational and comprehensive approach to prevention, mitigation, and management. This study involved an extensive literature review that located >500 references, which were analyzed to identify common themes, findings, and expert views. The findings then were distilled into common themes. The health impacts of floods are wide ranging, and depend on a number of factors. However, the health impacts of a particular flood are specific to the particular context. The immediate health impacts of floods include drowning, injuries, hypothermia, and animal bites. Health risks also are associated with the evacuation of patients, loss of health workers, and loss of health infrastructure including essential drugs and supplies. In the medium-term, infected wounds, complications of injury, poisoning, poor mental health, communicable diseases, and starvation are indirect effects of flooding. In the long-term, chronic disease, disability, poor mental health, and poverty-related diseases including malnutrition are the potential legacy. This article proposes a structured approach to the classification of the health impacts of floods and a conceptual framework that demonstrates the relationships between floods and the direct and indirect health consequences.

Power station impacts: socio-economic impact assessment

International Nuclear Information System (INIS)

Glasson, John; Elson, Martin; Barrett, Brendan; Wee, D. Van der

1987-01-01

The aim of this study is to assess the local social and economic impacts of a proposed nuclear power station development at Hinkley Point in Somerset. The proposed development, Hinkley Point C, would be an addition to the existing Hinkley Point A Magnox station, commissioned in 1965, and the Hinkley Point B Advanced Gas Cooled Reactor (AGR) station, commissioned in 1976. It is hoped that the study will be of assistance to the CEGB, the Somerset County and District Councils and other agencies in their studies of the proposed development. In addition, the study seeks to apply and further develop the methodology and results from previous studies by the Power Station Impacts (PSI) team for predicting the social and economic effects of proposed power station developments on their localities. (author)

Rubbish tips rehabilitation. Degradation mechanisms and impacts; Rehabilitation des decharges. Mecanismes de degradation et impacts

Energy Technology Data Exchange (ETDEWEB)

Chassagnac, Th. [CSZ AZUR, 69 - Lyon (France)

2005-06-01

Waste storage activity really started in the beginning of the industrial era when the consumption of goods has led to a production of wastes higher than the environment assimilation capacity. The waste storage and disposal activity has led to environmental impacts and risks which need to be evaluated and, if needed, processed. Waste storage remains the most common way of wastes elimination because of its simpleness and low cost. However, the closing down of sites is today strictly controlled by the law and the rehabilitation problems concerns mainly the ancient sites. The waste storage domain is at the crossroads of multiple scientific domains like: hydrogeology, rudology, biology, hydraulics and hydrology, water and gases processing, ecology, health sciences and risk assessments, and thus requires a multi-disciplinary approach. This article deals with the rehabilitation of rubbish tips and presents: 1 - the typology and regulatory evolution of waste storage centers; 2 - the main pollutants, their mechanisms and way of impact on the environment: typology of pollutants (origin and nature; mobility influencing factors; risk, hazard, exposure and impact notions); impacts on air (origin and mechanism of biogas generation, biogas composition, mass status of biogas production, risks linked with biogas); impact on waters (leachates; hydric status; impact on groundwaters; impact on surface waters; impact on soils and natural ecosystems; other harmful effects: aesthetics, noise, vermin; stability). (J.S.)

Ejecta evolution during cone impact

KAUST Repository

Marston, Jeremy

2014-07-07

We present findings from an experimental investigation into the impact of solid cone-shaped bodies onto liquid pools. Using a variety of cone angles and liquid physical properties, we show that the ejecta formed during the impact exhibits self-similarity for all impact speeds for very low surface tension liquids, whilst for high-surface tension liquids similarity is only achieved at high impact speeds. We find that the ejecta tip can detach from the cone and that this phenomenon can be attributed to the air entrainment phenomenon. We analyse of a range of cone angles, including some ogive cones, and impact speeds in terms of the spatiotemporal evolution of the ejecta tip. Using superhydrophobic cones, we also examine the entry of cones which entrain an air layer.

IMPACTS !

CERN Multimedia

2008-01-01

(Photo courtesy of Don Davis / NASA)The University of Geneva (UNIGE) and the Ecole Polytechnique Fédérale of Lausanne (EPFL) are organising the 4th series of public lectures on astronomy, on the theme of "Impacts". The schedule is as follows: Il y a 100 ans : une explosion dans la Tunguska – Dr. Frédéric COURBIN, EPFL Les impacts sur Terre – Prof. Didier Queloz, UNIGE La fin des dinosaures – Dr. Stéphane Paltani, UNIGE Wednesday 7 May 2008, from 7.00 p.m. to 9.00 p.m. Auditoire CO1, EPFL, Ecublens Thursday 08 May 2008, from 7.00 p.m. to 9.00 p.m. Auditoire Rouiller, Uni-Dufour, Genève All 3 lectures will be givent each evening! Admission free Information: 022 379 22 00

Measuring Research Impact in Australia

Science.gov (United States)

Gunn, Andrew; Mintrom, Michael

2018-01-01

The implementation of the national Research Engagement and Impact Assessment in Australia provides a timely opportunity to review attempts to improve the non-academic impact of academic research. The impact agenda represents a new phase in academic research evaluation and funding, characterised by a heightened need to demonstrate a return on…

32 CFR 651.16 - Cumulative impacts.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Cumulative impacts. 651.16 Section 651.16... § 651.16 Cumulative impacts. (a) NEPA analyses must assess cumulative effects, which are the impact on the environment resulting from the incremental impact of the action when added to other past, present...

Impact of radioactive waste management operations

International Nuclear Information System (INIS)

Paine, D.; Rogers, L.E.; Uresk, D.W.

1977-01-01

Impact assessment of radioactive waste management operations is considered separately for nonradiological impact on biota, impact on ecosystem structure and function and radiological impact on biota. Localized effects related to facility construction and maintenance activities probably occur but the large expanse of relatively undisturbed surrounding landscape minimizes any overall effects

IMPACTS-BRC, Version 2.0

International Nuclear Information System (INIS)

O'Neal, B.L.; Lee, C.E.

1990-04-01

This manual describes the procedures for implementing IMPACT-BRC Version 2.0. IMPACTS-BRC is a generic, radiological assessment code intended to be used by the US Nuclear Regulatory Commission (NRC) to evaluate petitions to classify specific waste streams as below regulatory concern (BRC). The code is designed to demonstrate compliance to BRC standards by modeling and calculating annual radiological impacts to the maximal individual, critical groups, and the general population as the result of transportation treatment, disposal, and post-disposal activities involving low-level radioactive waste. Impacts are calculated for multiple nuclides and pathways depending on data input and treatment and disposal options specified by the code user. The treatment and disposal options include onsite incineration, offsite incineration at municipal and hazardous waste landfills. Included within the disposal options is the ability to calculate impacts from the sorting and/or recycling of metal containers and metal and glass materials. Nuclide-specific accounting is provided to facilitate identification of the critical nuclides and pathways contributing to the impacts. Default environmental and facility parameters are developed from reference treatment/disposal sites. The user has the option to replace default parameters with site-specific parameters to provide more realistic estimation of impacts. 8 refs., 10 figs., 44 tabs

CARIAA Background Studies Biophysical Impacts

International Development Research Centre (IDRC) Digital Library (Canada)

Garrett Kilroy

Services Framework. – Focus on topics in red box. • Entry points to link with social vulnerability. – Ecosystem Services (state and impact), i.e. degraded services impact ... ecosystems (e.g. mangroves). – Impacts on fisheries and other food production systems. A delta in the Ganges, Bangladesh. Picture: SPL / Barcroft Media ...

Impacts

NARCIS (Netherlands)

Hellmuth, M.; Kabat, P.

2003-01-01

Even without the impacts of climate change, water managers face prodigious challenges in meeting sustainable development goals. Growing populations need affordable food, water and energy. Industrial development demands a growing share of water resources and contaminates those same resources with its

Environmental impact statement law and environmental impact statement administration regulation

International Nuclear Information System (INIS)

Feldmann, F.J.

1991-01-01

The contribution does not deal with the question - as might be suggested by the heading - that the execution of the environmental impact statement law might be uncertain if there are no further accompanying legal transformatory acts. Putting the environmental impact statements into action is concerned in partiuclar with procedural provisions regarding the Federal Act on Protection against Nuisances and the Atomic Energy Act. The author deals with aspects of the environmental impact statement law and the state-of-the-art achieved so far. He also deals with legislative intent, with further points of putting the law into practice, i.e. the information requirements in the administrative provisions and the integrating aspect, the amalgamating aspect, the requirements made on the state of the environment, and the significance of administrative provisions. Also treated are legal procedures in the Federal Laender and on an international level. (RST) [de

Vichada meteorite impact effects from simulation of regional environmental consequences of a meteoroid impact on Earth

Directory of Open Access Journals (Sweden)

Orlando Hernandez Pardo

2018-01-01

Full Text Available This study estimates the regional environmental consequences of the impactor extraterrestrial body that could produce the probable Vichada impact crater structure on the Vichada Plain, in Colombia, South America. This paper details the parameter assumptions upon which the estimation is made. It describes an approach to quantifying the principal impact processes that could have affected the landscape in the vicinity of the probable Vichada impact event in the past. The key parameters are impactor diameter, impactor density, impact velocity before atmospheric entry, impact angle, and the distance from the impact at which the environmental effects are to be calculated, and the target type of sedimentary rock or crystalline rock. These parameters were chosen with support from The Vichada Structure dimensions obtained from remote sensing data interpretation, regional geologic mapping and interpreted satellite data and ground-based gravity and magnetic anomalies. The calculations are based on compiled novel algorithms for estimating the thermal radiation emitted by the impact-generated vapor plume or fireball, and the intensity of seismic shaking. Model validation is performed by obtaining the approximates various dimensions of the Vichada impact crater and ejecta deposit, as well as estimating the severity of the air blasting both crater-forming and air burst impacts. We illustrate the utility of the calculations by examining the predicted environmental consequences in seven localities of the Colombian territory, through hypothetical impact scenarios occurring in Cumaribo and Puerto Carreño (Vichada, Puerto Inirida (Guainía, Puerto Gaitán and Villavicencio (Meta, Mitú (Vaupes and Bogotá, D.C. It is concluded that the most wide-reaching environmental consequence is seismic shaking. Both ejecta deposit thickness and air-blast pressure decay much more rapidly with distance than with seismic ground motion. Close to the impact site, the most

Environmental impact assessment report

Energy Technology Data Exchange (ETDEWEB)

Jung, K. J.; Paik, S. T.; Chung, U. S.; Jung, K. H.; Park, S. K.; Lee, D. G.; Kim, H. R.; Kim, J. K.; Yang, S. H.; Lee, B. J.; Kim, E. H.; Choi, K. S

2000-10-01

This report is the revised Environmental Impact Assessment Report which was made and submitted as one of the license documents for TRIGA Research Reactor D and D Project. The Environmental Impact Assessment Report includes introduction of decommissioning plan, status of reactors and environmental impact of surroundings. Also it was assessed and analyzed on radioactivity for environment, and the plan was established to minimize radioactive material release. Finally environmental monitoring plan was established to confirm whether contaminated or not from radioactivity during decommissioning period. According to the assessment results, the risk of excess exposure will be not on environment and public. The first Environmental Impact Assessment Report was submitted to the government for the license and reviewed by Korea Institute of Nuclear Safety. The first Report was revised including answers for the questions arising from review process.

Measuring Impact in Research Evaluations: A Thorough Discussion of Methods For, Effects of and Problems with Impact Measurements

Science.gov (United States)

Bornmann, Lutz

2017-01-01

Impact of science is one of the most important topics in scientometrics. Recent developments show a fundamental change in impact measurements from impact on science to impact on society. Since impact measurement is currently in a state of far reaching changes, this paper describes recent developments and facing problems in this area. For that, the…

Impact of granular drops

KAUST Repository

Marston, J. O.

2013-07-15

We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

Environmental impact report (draft)

Energy Technology Data Exchange (ETDEWEB)

1980-05-01

The three projects as proposed by Pacific Gas and Electric Company and the environmental analysis of the projects are discussed. Sections on the natural and social environments of the proposed projects and their surrounding areas consist of descriptions of the setting, discussions of the adverse and beneficial consequences of the project, and potential mitigation measures to reduce the effects of adverse impacts. The Environmental Impact Report includes discussions of unavoidable adverse effects, irreversible changes, long-term and cumulative impacts, growth-inducing effects, and feasible alternatives to the project. (MHR)

Impact of granular drops

KAUST Repository

Marston, J. O.; Mansoor, Mohammad M.; Thoroddsen, Sigurdur T

2013-01-01

We investigate the spreading and splashing of granular drops during impact with a solid target. The granular drops are formed from roughly spherical balls of sand mixed with water, which is used as a binder to hold the ball together during free-fall. We measure the instantaneous spread diameter for different impact speeds and find that the normalized spread diameter d/D grows as (tV/D)1/2. The speeds of the grains ejected during the “splash” are measured and they rarely exceed twice that of the impact speed.

On-Line Impact Load Identification

Directory of Open Access Journals (Sweden)

Krzysztof Sekuła

2013-01-01

Full Text Available The so-called Adaptive Impact Absorption (AIA is a research area of safety engineering devoted to problems of shock absorption in various unpredictable scenarios of collisions. It makes use of smart technologies (systems equipped with sensors, controllable dissipaters and specialised tools for signal processing. Examples of engineering applications for AIA systems are protective road barriers, automotive bumpers or adaptive landing gears. One of the most challenging problems for AIA systems is on-line identification of impact loads, which is crucial for introducing the optimum real-time strategy of adaptive impact absorption. This paper presents the concept of an impactometer and develops the methodology able to perform real-time impact load identification. Considered dynamic excitation is generated by a mass M1 impacting with initial velocity V0. An analytical formulation of the problem, supported with numerical simulations and experimental verifications is presented. Two identification algorithms based on measured response of the impacted structure are proposed and discussed. Finally, a concept of the AIA device utilizing the idea of impactometer is briefly presented.

Measuring the impact of methodological research: a framework and methods to identify evidence of impact.

Science.gov (United States)

Brueton, Valerie C; Vale, Claire L; Choodari-Oskooei, Babak; Jinks, Rachel; Tierney, Jayne F

2014-11-27

Providing evidence of impact highlights the benefits of medical research to society. Such evidence is increasingly requested by research funders and commonly relies on citation analysis. However, other indicators may be more informative. Although frameworks to demonstrate the impact of clinical research have been reported, no complementary framework exists for methodological research. Therefore, we assessed the impact of methodological research projects conducted or completed between 2009 and 2012 at the UK Medical Research Council Clinical Trials Unit Hub for Trials Methodology Research Hub, with a view to developing an appropriate framework. Various approaches to the collection of data on research impact were employed. Citation rates were obtained using Web of Science (http://www.webofknowledge.com/) and analyzed descriptively. Semistructured interviews were conducted to obtain information on the rates of different types of research output that indicated impact for each project. Results were then pooled across all projects. Finally, email queries pertaining to methodology projects were collected retrospectively and their content analyzed. Simple citation analysis established the citation rates per year since publication for 74 methodological publications; however, further detailed analysis revealed more about the potential influence of these citations. Interviews that spanned 20 individual research projects demonstrated a variety of types of impact not otherwise collated, for example, applications and further developments of the research; release of software and provision of guidance materials to facilitate uptake; formation of new collaborations and broad dissemination. Finally, 194 email queries relating to 6 methodological projects were received from 170 individuals across 23 countries. They provided further evidence that the methodologies were impacting on research and research practice, both nationally and internationally. We have used the information

Effect of impact angle on vaporization

Science.gov (United States)

Schultz, Peter H.

1996-09-01

Impacts into easily vaporized targets such as dry ice and carbonates generate a rapidly expanding vapor cloud. Laboratory experiments performed in a tenuous atmosphere allow deriving the internal energy of this cloud through well-established and tested theoretical descriptions. A second set of experiments under near-vacuum conditions provides a second measure of energy as the internal energy converts to kinetic energy of expansion. The resulting data allow deriving the vaporized mass as a function of impact angle and velocity. Although peak shock pressures decrease with decreasing impact angle (referenced to horizontal), the amount of impact-generated vapor is found to increase and is derived from the upper surface. Moreover, the temperature of the vapor cloud appears to decrease with decreasing angle. These unexpected results are proposed to reflect the increasing roles of shear heating and downrange hypervelocity ricochet impacts created during oblique impacts. The shallow provenance, low temperature, and trajectory of such vapor have implications for larger-scale events, including enhancement of atmospheric and biospheric stress by oblique terrestrial impacts and impact recycling of the early atmosphere of Mars.

CSIR Technology Impact 1998

CSIR Research Space (South Africa)

CSIR

1998-01-01

Full Text Available stream_source_info CSIR Technology Impact 1998.pdf.txt stream_content_type text/plain stream_size 23 Content-Encoding ISO-8859-1 stream_name CSIR Technology Impact 1998.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

Pulling Marbles from a Bag: Deducing the Regional Impact History of the SPA Basin from Impact Melt Rocks

Science.gov (United States)

Cohen, Barbara A.; Coker, R. F.

2009-01-01

The South Pole-Aitken (SPA) basin is an important target for absolute age-dating. Vertical and lateral impact mixing ensures that regolith within SPA will contain rock fragments from SPA itself, local impact craters, and faraway giant basins. About 20% of the regolith at any given site is foreign [1, 2], but much of this material will be cold ejecta, not impact melt. We calculated the fraction of contributed impact melt using scaling laws to estimate the amount and provenance of impact melt, demonstrating that SPA melt is the dominant impact melt rock (>70%) likely to be present. We also constructed a statistical model to illustrate how many randomly-selected impact-melt fragments would need to be dated, and with what accuracy, to confidently reproduce the impact history of a site. A detailed impact history becomes recognizable after a few hundred to a thousand randomly-selected marbles, however, it will be useful to have more information (e.g. compositional, mineralogical, remote sensing) to group fragments. These exercises show that SPA melt has a high probability of being present in a scoop sample and that dating of a few hundred to a thousand impact-melt fragments will yield the impact history of the SPA basin.

Modeling pellet impact drilling process

Science.gov (United States)

Kovalyov, A. V.; Ryabchikov, S. Ya; Isaev, Ye D.; Ulyanova, O. S.

2016-03-01

The paper describes pellet impact drilling which could be used to increase the drilling speed and the rate of penetration when drilling hard rocks. Pellet impact drilling implies rock destruction by metal pellets with high kinetic energy in the immediate vicinity of the earth formation encountered. The pellets are circulated in the bottom hole by a high velocity fluid jet, which is the principle component of the ejector pellet impact drill bit. The experiments conducted has allowed modeling the process of pellet impact drilling, which creates the scientific and methodological basis for engineering design of drilling operations under different geo-technical conditions.

Concrete structures under projectile impact

CERN Document Server

Fang, Qin

2017-01-01

In this book, the authors present their theoretical, experimental and numerical investigations into concrete structures subjected to projectile and aircraft impacts in recent years. Innovative approaches to analyze the rigid, mass abrasive and eroding projectile penetration and perforation are proposed. Damage and failure analyses of nuclear power plant containments impacted by large commercial aircrafts are numerically and experimentally analyzed. Ultra-high performance concrete materials and structures against the projectile impact are developed and their capacities of resisting projectile impact are evaluated. This book is written for the researchers, engineers and graduate students in the fields of protective structures and terminal ballistics.

[Impacts of numerology on acupuncture].

Science.gov (United States)

Chen, Min; Wu, Changqiu; Wu, Xueyi

2016-04-01

Numerology has a long history in China and has the profound impacts on every academic field in TCM, with acupuncture involved. In this paper, the impacts on acupuncture were discussed in different aspects such as the numbers of meridians, the length of meridian, the time taboo of acupuncture, acupuncture manipulation and time acupuncture. It was found that numerology had laid the critical impact on acupuncture and had the profound imprint nowadays. It is of great significance to study the numerology theory in its impacts on acupuncture, in the exploration on the theories behind acupuncture as well as the comprehensive understanding of acupuncture.

Head impact in a snowboarding accident.

Science.gov (United States)

Bailly, N; Llari, M; Donnadieu, T; Masson, C; Arnoux, P J

2017-09-01

To effectively prevent sport traumatic brain injury (TBI), means of protection need to be designed and tested in relation to the reality of head impact. This study quantifies head impacts during a typical snowboarding accident to evaluate helmet standards. A snowboarder numerical model was proposed, validated against experimental data, and used to quantify the influence of accident conditions (speed, snow stiffness, morphology, and position) on head impacts (locations, velocities, and accelerations) and injury risk during snowboarding backward falls. Three hundred twenty-four scenarios were simulated: 70% presented a high risk of mild TBI (head peak acceleration >80 g) and 15% presented a high risk of severe TBI (head injury criterion >1000). Snow stiffness, speed, and snowboarder morphology were the main factors influencing head impact metrics. Mean normal head impact speed (28 ± 6 km/h) was higher than equivalent impact speed used in American standard helmet test (ASTM F2040), and mean tangential impact speed, not included in standard tests, was 13.8 (±7 km/h). In 97% of simulated impacts, the peak head acceleration was below 300 g, which is the pass/fail criteria used in standard tests. Results suggest that initial speed, impacted surface, and pass/fail criteria used in helmet standard performance tests do not fully reflect magnitude and variability of snowboarding backward-fall impacts. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

46 CFR 504.7 - Environmental impact statements.

Science.gov (United States)

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Environmental impact statements. 504.7 Section 504.7... POLICY ANALYSIS § 504.7 Environmental impact statements. (a) General. (1) An environmental impact... environmental impact statements. (1) A draft environmental impact statement (DEIS) will initially be prepared in...

From Pressures to Impacts

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky

2006-01-01

materials over manufacture or construction through use to disposal or decommissioning and recycling. It is a holistic tool in the sense that it models all relevant environmental impacts from the global (like climate change and ozone depletion) to the local (like land use) and also the loss of resources......Life cycle assessment (LCA) has been developed as a tool for assessment of the environmental impacts which are caused by the pressures from products or systems, viewed in a life cycle perspective, i.e. covering all stages of the life cycle of the product or system from the extraction of raw...... is defined, Inventory analysis where data for the physical flows to and from all processes in the life cycle is collected and related to the functional unit, Impact assessment, where the physical flows are translated into impacts on the environment and resource base, and Interpretation where the outcomes...

Physics of soft impact and cratering

CERN Document Server

Katsuragi, Hiroaki

2016-01-01

This book focuses on the impact dynamics and cratering of soft matter to describe its importance, difficulty, and wide applicability to planetary-related problems. A comprehensive introduction to the dimensional analysis and constitutive laws that are necessary to discuss impact mechanics and cratering is first provided. Then, particular coverage is given to the impact of granular matter, which is one of the most crucial constituents for geophysics. While granular matter shows both solid-like and fluid-like behaviors, neither solid nor fluid dynamics is sufficient to fully understand the physics of granular matter. In order to reveal its fundamental properties, extensive impact tests have been carried out recently. The author reveals the findings of these recent studies as well as what remains unsolved in terms of impact dynamics. Impact crater morphology with various soft matter impacts also is discussed intensively. Various experimental and observational results up to the recent Itokawa asteroid’s terrain...

Light-weight radioisotope heater impact tests

International Nuclear Information System (INIS)

Reimus, M.A.H.; Rinehart, G.H.; Herrera, A.

1998-01-01

The light-weight radioisotope heater unit (LWRHU) is a 238 PuO 2 -fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed 238 PuO 2 fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s

Distributional Aspects of Climate Change Impacts

International Nuclear Information System (INIS)

Tol, R.S.J. Tol; Kuik, O.J.; Downing, T.; Smith, J.B.

2003-01-01

This paper gives a brief review about the state of knowledge on the distributional aspects of climate change impacts. The paper is largely limited to the distribution of impacts between countries (in Section 2). Although there are virtually no estimates reported in the literature, the distribution of impacts within countries is also important. Impact estimates for different sectors (agriculture, health, sea level rise) provides little guidance for estimating differential impacts within countries. It is even harder to find estimates based on social classes. The paper restricts itself to equity about the consequences of climate change. Equity issues about the consequences of emission reduction are ignored here, but should of course be part of a policy analysis. Equity issues about procedures for decision making are also ignored. The paper is organised as follows. Section 2 reviews recent estimates of the regional impacts of climate change. Section 3 discusses alternative ways of aggregating regional impact estimates. Section 4 focusses on the vulnerability of the poor to climate change impacts, both with respect to exposure as well as to their limited capacity for adaptation. Section 5 discusses the impacts of economic development and other dynamic changes on vulnerability. The paper abstains from a discussion of aggregating climate change impacts over time, partly because the literature on that is too substantial to be reviewed here, and partly because, under virtually all scenarios, the current generation is the poorest and therefore particularly worthy in equity considerations. In Section 6 we present salient conclusions

Integrated manure management to reduce environmental impact: II. Environmental impact assessment of strategies

NARCIS (Netherlands)

Vries, de J.W.; Groenestein, C.M.; Schroder, J.J.; Hoogmoed, W.B.; Sukkel, W.; Groot Koerkamp, P.W.G.; Boer, de I.J.M.

2015-01-01

Manure management contributes to adverse environmental impacts through losses of nitrogen (N), phosphorus, and carbon (C). In this study, we aimed to assess the potential of newly designed strategies for integrated manure management (IS) to reduce environmental impact. An important aspect of the

Value-impact analysis. Final report

International Nuclear Information System (INIS)

Cohn, M.; Dracup, J.A.; Erdmann, R.C.; Hughes, E.; vonHerrmann, J.

1979-11-01

This document represents a first step in the process of developing comprehensive value-impact methodology for the nuclear industry. It describes the development of the methodology and includes a discussion of the uses of cost-benefit or value-impact by other industries. This background is provided as a guide to the development of the methodology for the specific problems confronted by the nuclear industry. The use of benefit-cost analysis, or value-impact analysis, within the nuclear power industry has grown in recent years and is relied upon by both the regulatory community and the regulated industry. This report summarizes the state of the art of value-impact analysis as it affects these users. Relevant past experience in such fields as water resource development, transportation, environmental concerns, and health and medicine is reviewed. A critique of the applicability of existing value-impact analysis methods to nuclear safety decision problems is presented

Molecular dynamics simulation of impact test

International Nuclear Information System (INIS)

Akahoshi, Y.; Schmauder, S.; Ludwig, M.

1998-01-01

This paper describes an impact test by molecular dynamics (MD) simulation to evaluate embrittlement of bcc Fe at different temperatures. A new impact test model is developed for MD simulation. The typical fracture behaviors show transition from brittle to ductile fracture, and a history of the impact loads also demonstrates its transition. We conclude that the impact test by MD could be feasible. (orig.)

Molecular dynamics simulation of impact test

Energy Technology Data Exchange (ETDEWEB)

Akahoshi, Y. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan); Schmauder, S.; Ludwig, M. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

1998-11-01

This paper describes an impact test by molecular dynamics (MD) simulation to evaluate embrittlement of bcc Fe at different temperatures. A new impact test model is developed for MD simulation. The typical fracture behaviors show transition from brittle to ductile fracture, and a history of the impact loads also demonstrates its transition. We conclude that the impact test by MD could be feasible. (orig.)

Environmental impacts of climate change adaptation

Energy Technology Data Exchange (ETDEWEB)

Enríquez-de-Salamanca, Álvaro, E-mail: aenriquez@draba.org [Universidad Nacional de Educación a Distancia (UNED)/Draba Ingeniería y Consultoría Medioambiental, Cañada Nueva, 13, 28200 San Lorenzo de El Escorial (Spain); Díaz-Sierra, Rubén, E-mail: sierra@dfmf.uned.es [Departamento de Física Matemática y de Fluidos, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Martín-Aranda, Rosa M., E-mail: rmartin@ccia.uned.es [Departamento de Química Inorgánica y Química Técnica, Facultad de Ciencias, Universidad Nacional de Educación a Distancia (UNED), Paseo Senda del Rey, 9, 28040 Madrid (Spain); Santos, Maria J., E-mail: M.J.FerreiraDosSantos@uu.nl [Department of Innovation, Environmental and Energy Sciences, Utrecht University, Heidelberglaan 2, 3572 TC Utrecht (Netherlands)

2017-05-15

Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

Environmental impacts of climate change adaptation

International Nuclear Information System (INIS)

Enríquez-de-Salamanca, Álvaro; Díaz-Sierra, Rubén; Martín-Aranda, Rosa M.; Santos, Maria J.

2017-01-01

Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship between climate change adaptation and environmental impact assessment, and the degree to which environmental impacts are included in climate change adaptation theory and practice. Our literature review showed that technical, social and economic perspectives on climate change adaptation receive much more attention than the environmental perspective. The scarce interest on the environmental impacts of adaptation may be attributed to (1) an excessive sectoral approach, with dominance of non-environmental perspectives, (2) greater interest in mitigation and direct climate change impacts rather than in adaptation impacts, (3) a tendency to consider adaptation as inherently good, and (4) subjective/preconceived notions on which measures are good or bad, without a comprehensive assessment. Environmental Assessment (EA) has a long established history as an effective tool to include environment into decision-making, although it does not yet guarantee a proper assessment of adaptation, because it is still possible to postpone or even circumvent the processes of assessing the impacts of climate adaptation. Our results suggest that there is a need to address adaptation proactively by including it in EA, to update current policy frameworks, and to demand robust and reliable evaluation of alternatives. Only through the full EA of adaptation measures can we improve our understanding of the primary and secondary impacts of adaptation to global environmental change. - Highlights: • Climate change adaptation may have undesirable environmental impacts. • The impacts of adaptation are yet poorly analysed in the literature. • There is an excessive sectoral approach to adaptation, mainly

Studying the impact of academic events

DEFF Research Database (Denmark)

Hansen, Thomas Trøst; Pedersen, David Budtz

2018-01-01

of scholarly work, to increase collaboration with non-academic partners and to achieve a broad range of socio-economic benefits. Impact assessment frameworks are occupied with documenting the effects of science on a large number of variables. However, the participation and hosting of academic events have......Demands that publicly funded scientific research should demonstrate its academic and societal impact have been commonplace for some time. Research communities, university administrators and policy-makers are looking to impact assessments and impact toolkits to better communicate the value...... not been included in most frameworks. In this scoping review, we demonstrate that academic events are an important vehicle for academic and societal value-creation that should be integrated in future impact studies. The review presents the main trends in the literature by categorizing the impact...

Solid propellant impact tests

International Nuclear Information System (INIS)

Snow, E.C.

1976-03-01

Future space missions, as in the past, call for the continued use of radioisotopes as heat sources for thermoelectric power generators. In an effort to minimize the risk of radioactive contamination of the environment, a complete safety analysis of each such system is necessary. As a part of these analyses, the effects on such a system of a solid propellant fire environment resulting from a catastrophic launch pad abort must be considered. Several impact tests were conducted in which either a simulant MHW-FSA or a steel ball was dropped on the cold, unignited or the hot, burning surface of a block of UTP-3001 solid propellant. The rebound velocities were measured for both surface conditions of the propellant. The resulting coefficient of restitution, determined as the ratio of the components of the impact and rebound velocities perpendicular to the impact surface of the propellant, were not very dependent on whether the surface was cold or hot at the time of impact

Social Impact Assessment : Guidance for assessing and managing the social impacts of projects

NARCIS (Netherlands)

Vanclay, Francis; Esteves, Ana Maria; Aucamp, Ilse; Franks, Daniel

2015-01-01

The purpose of this Guidance Note is to provide advice to various stakeholders about what is expected in good practice social impact assessment (SIA) and social impact management processes, especially in relation to project development. Project development refers to dams, mines, oil and gas

Potsdam Institute for Climate Impact Research: Computer simulation -climate impact research. Final report

International Nuclear Information System (INIS)

1993-07-01

Climate impact assessment is a new field of research which, owing to international and national efforts to understand and cope with the impending global climate changes on a global, regional and local level, has rapidly become a central field of research of the Federal Ministry of Research and Technology. In contrast to other countries, Germany had no research facilities and infrastructure that could be used. The Potsdam Institute for Climate Impact Research was to provide the infrastructure basis for climate impact research in Germany. The Institute was founded by the BMFT and the Land of Brandenburg. (orig.) [de

Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Hauschild, Michael Zwicky; Boulay, Anne-Marie

2018-01-01

This chapter is dedicated to the third phase of an LCA study, the Life Cycle Impact Assessment (LCIA) where the life cycle inventory’s information on elementary flows is translated into environmental impact scores. In contrast to the three other LCA phases, LCIA is in practice largely automated...

The Desire for Impact

NARCIS (Netherlands)

A.J. Dur (Robert)

2004-01-01

textabstractThis paper explores the meaning and implications of the desire by workers for impact. We find that this impact motive can make firms in a competitive labor market act as monopsonists, lead workers with the same characteristics but at different firms to earn different wages, may alleviate

Environmental impact of Yucca Mountain Repository

International Nuclear Information System (INIS)

Ahn, Joonhong

2005-01-01

Environmental impact of the Yucca Mountain Repository (YMR) has been quantitatively evaluated in terms of the radiotoxicity of transuranic (TRU) and fission-product radionuclides existing in the environment after released from failed packages. Inventory abstraction has been made based on the data published in Final Environmental Impact Statement published by US DOE. Mathematical model and computation code have been developed based on analytical solutions. Environmental impact from the commercial spent nuclear fuel (CSNF) packages is about 90% of the total impact including the contribution from defense waste (DW) packages. Impacts due to isotopes of Cm, Am, Pu and Np, and their decay daughters are dominant, compared with those from fission-product nuclides. Numerical results show that reduction of the TRU nuclides by a factor of 100 makes the impact from CSNF smaller than that from DW. (author)

Centrifuge impact cratering experiment 5

Science.gov (United States)

1984-01-01

Transient crates motions, cratering flow fields, crates dynamics, determining impact conditions from total crater welt, centrifuge quarter-space cratering, and impact cratering mechanics research is documented.

Magnetostratigraphy of the impact breccias and post-impact carbonates from borehole Yaxcopoil-1, Chicxulub impact crater, Yucatán, Mexico

Science.gov (United States)

Rebolledo-Vieyra, Mario; Urrutia-Fucugauchi, Jaime

2004-06-01

We report the magnetostratigraphy of the sedimentary sequence between the impact breccias and the post-impact carbonate sequence conducted on samples recovered by Yaxcopoil-1 (Yax-1). Samples of impact breccias show reverse polarities that span up to ~56 cm into the postimpact carbonate lithologies. We correlate these breccias to those of PEMEX boreholes Yucatán-6 and Chicxulub-1, from which we tied our magnetostratigraphy to the radiometric age from a melt sample from the Yucatán-6 borehole. Thin section analyses of the carbonate samples showed a significant amount of dark minerals and glass shards that we identified as the magnetic carriers; therefore, we propose that the mechanism of magnetic acquisition within the carbonate rocks for the interval studied is detrital remanent magnetism (DRM). With these samples, we constructed the scale of geomagnetic polarities where we find two polarities within the sequence, a reverse polarity event within the impact breccias and the base of the post-impact carbonate sequence (up to 794.07 m), and a normal polarity event in the last ~20 cm of the interval studied. The polarities recorded in the sequence analyzed are interpreted to span from chron 29r to 29n, and we propose that the reverse polarity event lies within the 29r chron. The magnetostratigraphy of the sequence studied shows that the horizon at 794.11 m deep, interpreted as the K/T boundary, lies within the geomagnetic chron 29r, which contains the K/T boundary.

The environmental impact of the carpet chain in Belgium; De milieu-impact van de Belgische tapijtketen

Energy Technology Data Exchange (ETDEWEB)

Bijleveld, M.N.; Sevenster, M.N.

2010-03-15

Under the Belgian project 'Cooperation in the carpet chain around sustainable use of materials' is a comprehensive LCA study in which insight is obtained on three areas: (1) Impact of various polar materials, (2) Impact of various scenarios of disposal of the entire carpet, and (3) Relative impact of the links in the chain of the entire carpet. The chain is modeled in the LCA software programme SimaPro for which use is made of the Ecoinvent database and existing LCA studies, supplemented with data from literature. For the extraction / production of various polar materials the environmental impacts are identified. For other areas, the climate impact as the cumulative energy demand is a measure of the burden on the environment. [Dutch] In het kader van het Belgische project 'Samenwerking in de tapijtketen rond duurzaam materiaalgebruik' is een globale LCA studie uitgevoerd waarbij inzicht is verkregen op drie gebieden: (1) Impact van verscheidene poolmaterialen; (2) Impact van verscheidene scenario's van afvalverwerking van het volledige tapijt; en (3) Relatieve impact van de schakels in de keten van het volledige tapijt. De keten is gemodelleerd in het LCA softwareprogramma Simapro, waarbij gebruik is gemaakt van de EcoInvent database en bestaande LCA-studies, aangevuld met data uit literatuur. Voor de winning/productie van poolmaterialen zijn verscheidene milieu-effecten in kaart gebracht; voor de overige gebieden vormen klimaatimpact als de cumulatieve energievraag ('cumulative energy demand' CED) de maat voor de milieubelasting.

Investigation on the innovative impact hydroforming technology

Science.gov (United States)

Lihui, Lang; Shaohua, Wang; Chunlei, Yang

2013-05-01

Hydroforming has a rapid development recently which has good forming quality and less cost. However, it still cannot meet the requirements of forming complex parts with small features just like convex tables, or bars which are widely employed in automotive and aircraft industries. The impact hydroforming technology means the most features are formed by hydroforming and the small features are rapidly reshaped by high intensity impact energy in a very short time after the traditional hydroforming. The impact pressure rises to the peak in 10ms which belongs to dynamic loading. In this paper, impact hydroforming process is proposed. The generation and transmission of impact hydroforming energy and impact shock wave were studied and simulated. The deformation process of the metal disks under the dynamic impact loading condition presented impact hydroforming is an effective technology to form complex parts with small features.

Impact decision support diagrams

Science.gov (United States)

Boslough, Mark

2014-10-01

One way to frame the job of planetary defense is to “find the optimal approach for finding the optimal approach” to NEO mitigation. This requires a framework for defining in advance what should be done under various circumstances. The two-dimensional action matrix from the recent NRC report “Defending Planet Earth” can be generalized to a notional “Impact Decision Support Diagram” by extending it into a third dimension. The NRC action matrix incorporated two important axes: size and time-to-impact, but probability of impact is also critical (it is part of the definitions of both the Torino and Palermo scales). Uncertainty has been neglected, but is also crucial. It can be incorporated by subsuming it into the NEO size axis by redefining size to be three standard deviations greater than the best estimate, thereby providing a built-in conservative margin. The independent variable is time-to-impact, which is known with high precision. The other two axes are both quantitative assessments of uncertainty and are both time dependent. Thus, the diagram is entirely an expression of uncertainty. The true impact probability is either one or zero, and the true size does not change. The domain contains information about the current uncertainty, which changes with time (as opposed to reality, which does not change).

CANFLEX fuel bundle impact test

International Nuclear Information System (INIS)

Chang, Seok Kyu; Chung, C. H.; Park, J. S.; Hong, S. D.; Kim, B. D.

1997-08-01

This document outlines the test results for the impact test of the CANFLEX fuel bundle. Impact test is performed to determine and verify the amount of general bundle shape distortion and defect of the pressure tube that may occur during refuelling. The test specification requires that the fuel bundles and the pressure tube retain their integrities after the impact test under the conservative conditions (10 stationary bundles with 31kg/s flow rate) considering the pressure tube creep. The refuelling simulator operating with pneumatic force and simulated shield plug were fabricated and the velocity/displacement transducer and the high speed camera were also used in this test. The characteristics of the moving bundle (velocity, displacement, impacting force) were measured and analyzed with the impact sensor and the high speed camera system. The important test procedures and measurement results were discussed as follows. 1) Test bundle measurements and the pressure tube inspections 2) Simulated shield plug, outlet flange installation and bundle loading 3) refuelling simulator, inlet flange installation and sensors, high speed camera installation 4) Perform the impact test with operating the refuelling simulator and measure the dynamic characteristics 5) Inspections of the fuel bundles and the pressure tube. (author). 8 refs., 23 tabs., 13 figs

How to measure the impact of premenstrual symptoms? Development and validation of the German PMS-Impact Questionnaire.

Science.gov (United States)

Kues, Johanna N; Janda, Carolyn; Kleinstäuber, Maria; Weise, Cornelia

2016-10-01

With 75% of women of reproductive age affected, premenstrual symptoms are very common, ranging from emotional and cognitive to physical symptoms. Premenstrual Syndrome and Premenstrual Dysphoric Disorder can lead to substantial functional interference and psychological distress comparable to that of dysthymic disorders. The assessment of this impact is required as a part of the diagnostic procedure in the DSM-5. In the absence of a specific measure, the authors developed the PMS-Impact Questionnaire. A sample of 101 women reporting severe premenstrual complaints was assessed with the twenty-two items in the questionnaire during their premenstrual phase in an ongoing intervention study at the Philipps-University Marburg from August 2013 until January 2015. An exploratory factor analysis revealed a two-factor solution (labeled Psychological Impact and Functional Impact) with 18 items. A Cronbach's alpha of 0.90 for Psychological Impact and of 0.90 for Functional Impact indicated good reliability. Convergent construct validity was demonstrated by moderate to high correlations with the Pain Disability Index. Low correlations with the Big Five Inventory-10 indicated good divergent validity. The PMS-Impact Questionnaire was found to be a valid, reliable, and an economic measure to assess the impact of premenstrual symptoms. In future research, cross validations and confirmatory factor analyses should be conducted.

Characterization of Vertical Impact Device Acceleration Pulses Using Parametric Assessment: Phase IV Dual Impact Pulses

Science.gov (United States)

2017-01-04

support contractor , Infoscitex, conducted a series of tests to identify the performance capabilities of the Vertical Impact Device (VID) and the Warrior...Impact Response: Test Series 1 Data Summary for Carriage Test Cell VID Carriage Programmer Drop Ht . (in) Mean Velocity Change (m/s) Mean...Table 6. VID Impact Response: Test Series 1 Data Summary for Seat Pan Test Cell VID Carriage Programmer Drop Ht . (in) Mean Velocity

Simulating plasma production from hypervelocity impacts

Energy Technology Data Exchange (ETDEWEB)

Fletcher, Alex, E-mail: alexcf@stanford.edu; Close, Sigrid [Stanford University, Aeronautics and Astronautics, 496 Lomita Mall, Stanford, California 94305 (United States); Mathias, Donovan [NASA Ames Research Center, Bldg. 258, Moffett Field, California 94035 (United States)

2015-09-15

Hypervelocity particles, such as meteoroids and space debris, routinely impact spacecraft and are energetic enough to vaporize and ionize themselves and as well as a portion of the target material. The resulting plasma rapidly expands into the surrounding vacuum. While plasma measurements from hypervelocity impacts have been made using ground-based technologies such as light gas guns and Van de Graaff dust accelerators, some of the basic plasma properties vary significantly between experiments. There have been both ground-based and in-situ measurements of radio frequency (RF) emission from hypervelocity impacts, but the physical mechanism responsible and the possible connection to the impact-produced plasma are not well understood. Under certain conditions, the impact-produced plasma can have deleterious effects on spacecraft electronics by providing a new current path, triggering an electrostatic discharge, causing electromagnetic interference, or generating an electromagnetic pulse. Multi-physics simulations of plasma production from hypervelocity impacts are presented. These simulations incorporate elasticity and plasticity of the solid target, phase change and plasma formation, and non-ideal plasma physics due to the high density and low temperature of the plasma. A smoothed particle hydrodynamics method is used to perform a continuum dynamics simulation with these additional physics. By examining a series of hypervelocity impacts, basic properties of the impact produced plasma plume (density, temperature, expansion speed, charge state) are determined for impactor speeds between 10 and 72 km/s. For a large range of higher impact speeds (30–72 km/s), we find the temperature is unvarying at 2.5 eV. We also find that the plasma plume is weakly ionized for impact speeds less than 14 km/s and fully ionized for impact speeds greater than 20 km/s, independent of impactor mass. This is the same velocity threshold for the detection of RF emission in recent

Ecological impact assessment

International Nuclear Information System (INIS)

Thomas, J.M.; Eberhardt, L.L.

1975-01-01

Quantitative problems in accomplishing ecological impact assessment with particular reference to defining population effects are discussed with some comments on the two approaches most commonly used, e.g., the experimental and simulation models. Some alternatives are suggested because both methods will probably fail to detect real population effects mostly due to poor understanding of ecosystems or because of the limitations inherent in field census methods. Most judgments of ecological impact are not quantitatively defensible but are qualitative, subjective, or political in nature. An examination of aggregates of data from various nuclear power plant sites may be one way to obtain enough replication to judge ecological impact. Thus, currently available data from such studies as well as appropriate demographic, vegetation, census, and bibliographic material could offer an interesting challenge to computer professionals if such an undertaking were contemplated. Present research programs at PNL and computer involvement are described. Future possibilities and directions are discussed. (U.S.)

Road ecology in environmental impact assessment

International Nuclear Information System (INIS)

Karlson, Mårten; Mörtberg, Ulla; Balfors, Berit

2014-01-01

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

Road ecology in environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Karlson, Mårten, E-mail: mkarlso@kth.se; Mörtberg, Ulla, E-mail: mortberg@kth.se; Balfors, Berit, E-mail: balfors@kth.se

2014-09-15

Transport infrastructure has a wide array of effects on terrestrial and aquatic ecosystems, and road and railway networks are increasingly being associated with a loss of biodiversity worldwide. Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) are two legal frameworks that concern physical planning, with the potential to identify, predict, mitigate and/or compensate transport infrastructure effects with negative impacts on biodiversity. The aim of this study was to review the treatment of ecological impacts in environmental assessment of transport infrastructure plans and projects. A literature review on the topic of EIA, SEA, biodiversity and transport infrastructure was conducted, and 17 problem categories on the treatment of biodiversity were formulated by means of a content analysis. A review of environmental impact statements and environmental reports (EIS/ER) produced between 2005 and 2013 in Sweden and the UK was then conducted using the list of problems as a checklist. The results show that the treatment of ecological impacts has improved substantially over the years, but that some impacts remain problematic; the treatment of fragmentation, the absence of quantitative analysis and that the impact assessment study area was in general delimited without consideration for the scales of ecological processes. Actions to improve the treatment of ecological impacts could include improved guidelines for spatial and temporal delimitation, and the establishment of a quantitative framework including tools, methods and threshold values. Additionally, capacity building and further method development of EIA and SEA friendly spatial ecological models can aid in clarifying the costs as well as the benefits in development/biodiversity tradeoffs. - Highlights: • The treatment of ecological impacts in EIA and SEA has improved. • Quantitative methods for ecological impact assessment were rarely used • Fragmentation effects were recognized

SCIX IMPACT ON DWPF CPC

Energy Technology Data Exchange (ETDEWEB)

Koopman, D.

2011-07-14

A program was conducted to systematically evaluate potential impacts of the proposed Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) Chemical Processing Cell (CPC). The program involved a series of interrelated tasks. Past studies of the impact of crystalline silicotitanate (CST) and monosodium titanate (MST) on DWPF were reviewed. Paper studies and material balance calculations were used to establish reasonable bounding levels of CST and MST in sludge. Following the paper studies, Sludge Batch 10 (SB10) simulant was modified to have both bounding and intermediate levels of MST and ground CST. The SCIX flow sheet includes grinding of the CST which is larger than DWPF frit when not ground. Nominal ground CST was not yet available, therefore a similar CST ground previously in Savannah River National Laboratory (SRNL) was used. It was believed that this CST was over ground and that it would bound the impact of nominal CST on sludge slurry properties. Lab-scale simulations of the DWPF CPC were conducted using SB10 simulants with no, intermediate, and bounding levels of CST and MST. Tests included both the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles. Simulations were performed at high and low acid stoichiometry. A demonstration of the extended CPC flowsheet was made that included streams from the site interim salt processing operations. A simulation using irradiated CST and MST was also completed. An extensive set of rheological measurements was made to search for potential adverse consequences of CST and MST and slurry rheology in the CPC. The SCIX CPC impact program was conducted in parallel with a program to evaluate the impact of SCIX on the final DWPF glass waste form and on the DWPF melter throughput. The studies must be considered together when evaluating the full impact of SCIX on DWPF. Due to the fact that the alternant flowsheet for DWPF has not been selected, this study did not

Tests of the Giant Impact Hypothesis

Science.gov (United States)

Jones, J. H.

1998-01-01

The giant impact hypothesis has gained popularity as a means of explaining a volatile-depleted Moon that still has a chemical affinity to the Earth. As Taylor's Axiom decrees, the best models of lunar origin are testable, but this is difficult with the giant impact model. The energy associated with the impact would be sufficient to totally melt and partially vaporize the Earth. And this means that there should he no geological vestige of Barber times. Accordingly, it is important to devise tests that may be used to evaluate the giant impact hypothesis. Three such tests are discussed here. None of these is supportive of the giant impact model, but neither do they disprove it.

Environmental impact of high voltage aerial transmission lines

International Nuclear Information System (INIS)

Silva, R.P.; Mouallen, M.C.; Quintella, S.E.A.

1989-01-01

The identification of environmental impacts caused by the aerial transmission lines and the measures for reducing these impacts are discussed, considering the impact over the soil in different areas, biological effects caused by delayed exposure and visual impacts due to the line structures. A methodology for the impact evaluation and the aspects of the Environmental Impact Studies and Environmental Impact Report are also studied. (C.G.C.). 2 refs, 1 fig

Muscle tension increases impact force but decreases energy absorption and pain during visco-elastic impacts to human thighs.

Science.gov (United States)

Tsui, Felix; Pain, Matthew T G

2018-01-23

Despite uncertainty of its exact role, muscle tension has shown an ability to alter human biomechanical response and may have the ability to reduce impact injury severity. The aim of this study was to examine the effects of muscle tension on human impact response in terms of force and energy absorbed and the subjects' perceptions of pain. Seven male martial artists had a 3.9 kg medicine ball dropped vertically from seven different heights, 1.0-1.6 m in equal increments, onto their right thigh. Subjects were instructed to either relax or tense the quadriceps via knee extension (≥60% MVC) prior to each impact. F-scan pressure insoles sampling at 500 Hz recorded impact force and video was recorded at 1000 Hz to determine energy loss from the medicine ball during impact. Across all impacts force was 11% higher, energy absorption was 15% lower and time to peak force was 11% lower whilst perceived impact intensity was significantly lower when tensed. Whether muscle is tensed or not had a significant and meaningful effect on perceived discomfort. However, it did not relate to impact force between conditions and so tensing may alter localised injury risk during human on human type impacts. Copyright © 2017 Elsevier Ltd. All rights reserved.

The relationships between impact location and post-impact ball speed, bat torsion, and ball direction in cricket batting.

Science.gov (United States)

Peploe, C; McErlain-Naylor, S A; Harland, A R; King, M A

2018-06-01

Three-dimensional kinematic data of bat and ball were recorded for 239 individual shots performed by twenty batsmen ranging from club to international standard. The impact location of the ball on the bat face was determined and assessed against the resultant instantaneous post-impact ball speed and measures of post-impact bat torsion and ball direction. Significant negative linear relationships were found between post-impact ball speed and the absolute distance of impact from the midline medio-laterally and sweetspot longitudinally. Significant cubic relationships were found between the distance of impact from the midline of the bat medio-laterally and both a measure of bat torsion and the post-impact ball direction. A "sweet region" on the bat face was identified whereby impacts within 2 cm of the sweetspot in the medio-lateral direction, and 4.5 cm in the longitudinal direction, caused reductions in ball speed of less than 6% from the optimal value, and deviations in ball direction of less than 10° from the intended target. This study provides a greater understanding of the margin for error afforded to batsmen, allowing researchers to assess shot success in more detail, and highlights the importance of players generating consistently central impact locations when hitting for optimal performance.

Environmental Impacts, Health and Safety Impacts, and Financial Costs of the Front End of the Nuclear Fuel Cycle

Energy Technology Data Exchange (ETDEWEB)

Brett W Carlsen; Urairisa Phathanapirom; Eric Schneider; John S. Collins; Roderick G. Eggert; Brett Jordan; Bethany L. Smith; Timothy M. Ault; Alan G. Croff; Steven L. Krahn; William G. Halsey; Mark Sutton; Clay E. Easterly; Ryan P. Manger; C. Wilson McGinn; Stephen E. Fisher; Brent W. Dixon; Latif Yacout

2013-07-01

FEFC processes, unlike many of the proposed fuel cycles and technologies under consideration, involve mature operational processes presently in use at a number of facilities worldwide. This report identifies significant impacts resulting from these current FEFC processes and activities. Impacts considered to be significant are those that may be helpful in differentiating between fuel cycle performance and for which the FEFC impact is not negligible relative to those from the remainder of the full fuel cycle. This report: • Defines ‘representative’ processes that typify impacts associated with each step of the FEFC, • Establishes a framework and architecture for rolling up impacts into normalized measures that can be scaled to quantify their contribution to the total impacts associated with various fuel cycles, and • Develops and documents the bases for estimates of the impacts and costs associated with each of the representative FEFC processes.

Feeding of tropical trees and shrub foliages as a strategy to reduce ruminal methanogenesis: studies conducted in Cuba.

Science.gov (United States)

Delgado, Denia Caridad; Galindo, Juana; González, Rogelio; González, Niurca; Scull, Idania; Dihigo, Luís; Cairo, Juan; Aldama, Ana Irma; Moreira, Onidia

2012-06-01

The aim of this paper was to present the main results obtained in Cuba on the effects of feeding tropical trees and shrubs on rumen methanogenesis in animals fed with low quality fibrous diets. More than 20 tree and shrub foliages were screened for phytochemicals and analyzed for chemical constituents. From these samples, seven promising plants (Samanea saman, Albizia lebbeck, Tithonia diversifolia, Leucaena leucocephala, Trichantera gigantea, Sapindus saponaria, and Morus alba) were evaluated for methane reduction using an in vitro rumen fermentation system. Results indicated that the inclusion levels of 25% of Sapindo, Morus, or Trichantera foliages in the foliages/grass mixtures (grass being Pennisetum purpureum) reduced (P lebbeck, or T. diversifolia accession 23 foliages when mixed at the rate of 30% in Cynodon nlemfuensis grass produced lower methane compared to the grass alone. Inclusion levels of 15% and 25% of a ruminal activator supplement containing 29% of L. leucocehala foliage meal reduced methane by 37% and 42% when compared to the treatment without supplementation. In vivo experiment with sheep showed that inclusion of 27% of L. leucocephala in the diet increased the DM intake but did not show significant difference in methane production compared to control diet without this foliage. The results of these experiments suggest that the feeding of tropical tree and shrub foliages could be an attractive strategy for reduction of ruminal methanogenesis from animals fed with low-quality forage diets and for improving their productivity.

Formulation, evaluation and comparison of the herbal shampoo with the commercial shampoos

Directory of Open Access Journals (Sweden)

Khaloud Al Badi

2014-12-01

Full Text Available The study aimed to formulate a pure herbal shampoo and to evaluate and compare its physicochemical properties with the marketed synthetic and herbal shampoos. The herbal shampoo was formulated by adding the extracts of Acacia concinna, Sapindus mukorossi, Phyllanthus emblica, Ziziphus spina-christi and Citrus aurantifolia in different proportions to a 10% aqueous gelatin solution. Small amount of methyl paraben was added as a preservative and pH was adjusted with citric acid. Several tests such as visual inspection, pH, wetting time, % of solid contents, foam volume and stability, surface tension, detergency, dirt dispersion etc, were performed to determine the physicochemical properties of both prepared and marketed shampoos. The formulated herbal shampoo was also evaluated for conditioning performance by administering a blind test to 20 student volunteers. The formulated herbal shampoo was clear and appealing. It showed good cleansing and detergency, low surface tension, small bubble size and good foam stability after 5 min. The prepared shampoo and commercial shampoos showed comparable results for % solid contents also. The score of the conditioning performance of the tress washed with herbal shampoo was found to be 3.0 out of 4, while the score of the marketed synthetic and herbal shampoo was 3.4 and 3.3 respectively. The results indicated the formulated shampoo is having excellent conditioning performance, at par with commercially available shampoo. However, further research and development is required to improve it's quality and safety.

Development of a New Type of Green Switch Air Entraining Agent for Wet-Mix Shotcrete and Its Engineering Application

Directory of Open Access Journals (Sweden)

Guoming Liu

2016-01-01

Full Text Available Air entraining agent (AEA can bring a lot of microbubbles into fresh concrete for improving its fluidity; however, high fluidity has adverse effect on the shootability of wet-mix shotcrete. In order to solve the contradictory issue, the paper developed a new type of green switch air entraining agent (GSAE that can improve both the pumpability and shootability. The single-admixture and combination tests containing foaming ability and surface tension were performed with Deer agitator and automatic tension meter. The new AEA was developed with two constituents A and B. A was prepared with Sapindus mukorossi(S-1, dodecyl trimethyl ammonium chloride(1231, and polyacrylamide. B was prepared with lauryl sodium sulfate (K12 and silicone oil. The mass mix proportion was S-1 : 1231 : polyacrylamide : K12 : silicone oil = 1 : 0.33 : 0.2 : 0.33 : 0.47. The application method of GSAE proposed that A was premixed with fresh concrete and then B was added at nozzle. Experimental investigation showed that the optimal mixing amount of GSAE was 0.1%–0.2% relative to cement. All performance measured of wet-mix shotcrete with 0.12% GSAE met the first-grade product requirements of the China National Standard. Compared with the conventional type of AEA, the proposed GSAE is capable of effectively improving pumpability and shootability.

Impact on rock, water, and air

Science.gov (United States)

Ahrens, Thomas J.; O'Keefe, John D.

1986-01-01

It is argued that the meteorite-impact accretion is a process vital to the formation of the earth and terrestrial planets and that the evolution of the surfaces with time is affected by impacts. The paper reviews the previous calculations of Ahrens and O'Keefe of the effect of meteorite impacts on the rock surface of the earth, on the ocean, and the atmosphere, and presents some new work on the mechanism of impact-induced atmospheric escape. Using the similarity solution, the mass of atmosphere lost due to the impacts of 1 to 5 kg radius projectiles is calculated. It is shown that no atmosphere is lost for surface sources with energies less than 10 to the 27th erg. Impact of objects in the energy range 10 to the 27th to 10 to the 30th ergs causes gas losses of 10 to the 11th to 10 to the 14th kg (i.e., 10 to the -8th to 10 to the -5th of the total present atmospheric budget). Impact energies of greater than 10 to the 30th ergs cause little increase in atmospheric loss.

Impact of scarcity on consumer behavior

Directory of Open Access Journals (Sweden)

T.U. Kulakovsky

2016-09-01

Full Text Available This article analyzes the impact of scarcity on consumer behavior and on perception of scarce goods consumer qualities. The author examines and subjects to the critical analysis the impact of scarcity on consumer behavior within economic theory, the theory of reactance and commodity theory. The differences in explaining the impact of scarcity on consumer behavior in economic and psychological sciences is highlighted. The current researcher experimentally proves the impact of the scarcity as an isolated factor on consumer behavior and the impact of scarcity on consumer perception of product quality. According to the reactance theory, an individual perceives scarcity as the restriction of his freedom that causes resistance in response to a possible restriction of freedom of actions. This reinforces the desire to have such a scarce product. To confirm the psychological impact of scarcity on a domestic consumer the author designs and conducts the experiment that confirms the following hypotheses: scarcity affects consumer behavior and stimulates consumers to purchase scarce commodities; scarcity has impact on the perception of scarce product consumer qualities. Such consumer behavior relatively to scarce goods can be used by marketers to promote products on the market.

ENVIRONMENTAL IMPACT ASSESSMENT AND MONITORING ...

African Journals Online (AJOL)

protect the environment, it is imperative to conduct environmental impact assessment ... Ethiopia enacted the Environmental Impact Assessment Proclamation in 2002 ... flora, fauna, soil, air, water, climate, natural or cultural heritage, other.

21 CFR 25.42 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.42 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Preparation of Environmental Documents § 25.42 Environmental impact... be a clear, concise, and detailed written statement describing: (1) The environmental impacts of a...

10 CFR 960.3-4 - Environmental impacts.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impacts. 960.3-4 Section 960.3-4 Energy... REPOSITORY Implementation Guidelines § 960.3-4 Environmental impacts. Environmental impacts shall be... process. The DOE shall mitigate significant adverse environmental impacts, to the extent practicable...

32 CFR 989.16 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Environmental impact statement. 989.16 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.16 Environmental impact statement. (a) Certain classes of environmental impacts normally require preparation of an EIS (40 CFR 1501.4). These include...

22 CFR 216.7 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Environmental impact statements. 216.7 Section... Environmental impact statements. (a) Applicability. An Environmental Impact Statement shall be prepared when... Environmental Impact Statement relating to paragraph (a)(2) of this section shall comply with the CEQ...

49 CFR 266.19 - Environmental impact.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Environmental impact. 266.19 Section 266.19... TRANSPORTATION ACT § 266.19 Environmental impact. (a) General. The Administrator has determined that providing..., or other significant adverse environmental impact on any mode of transportation; (6) The action is...

Experimental constraints on impact-induced winds

Science.gov (United States)

Quintana, Stephanie N.; Schultz, Peter H.; Horowitz, Seth S.

2018-05-01

A new class of wind streaks on Mars uniquely associated with impact craters is most clearly detected in nighttime thermal infrared imaging. Thermally bright streaks radiate from some well-preserved impact craters and are related to the impact process. Using laboratory experiments performed at the NASA Ames Vertical Gun Range, we test the hypothesis that these streaks are formed from either the winds within an air-blast or winds set up by expanding impact vapor interacting with the atmosphere. The experiments use a variety of tracers and instruments to document three interrelated processes occurring in the impact of a Pyrex projectile into an easily vaporized powdered dolomite target: (1) a surface roughening spreading outward from the impact point, (2) an expanding vapor plume, and (3) outward winds made visible by dust trails from vertically placed, dusty pipe cleaners. The clear connection between the surface roughening, vapor expansion, and outward winds implicate an expanding vapor interacting with the atmosphere as the controlling process.

Evaluation of urban air pollution impact. Brest and Nantes impact at long term; Evaluation de l'impact sanitaire de la pollution atmospherique urbaine. Brest et Nantes impact a long terme

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The assessment for Brest and Nantes of the health impact in 1999 of chronic exposure to air pollution relies on four stages: health outcome identification, the selection of exposure-response functions, exposure assessment and risk characterization. The study characterizes: - the health gain due to a 25% decrease in air pollution levels; - the expected health impact of a 15% rise in air pollution levels. The results give the number of deaths attributable to air pollution. As for the health gain, the gain in days of life expectancy is also calculated. The study for Brest relies on one single exposure-response function. Concerning Nantes, the air control network is more complete and allows to use four exposure-response functions. The health gain due to a 25% decrease in air pollution levels is interpreted as a prudent evaluation of the health impact of air pollution. The estimated number of deaths due to the impact is around 38 (23 - 53) for Brest and around 40 (14 - 65) for Nantes. It means a decrease in the lifespan of 48 (29 - 68) days for Brest and 51 (17 - 84) days for Nantes. The uncertainty about exposure evaluation, the use of American exposure-response functions and of strong hypotheses to calculate the lifespan reduction generate more errors and uncertainty than for short term health impact assessment. (author)

Mechanical processes with repeated attenuated impacts

CERN Document Server

Nagaev, R F

1999-01-01

This book is devoted to considering in the general case - using typical concrete examples - the motion of machines and mechanisms of impact and vibro-impact action accompanied by a peculiar phenomenon called "impact collapse". This phenomenon is that after the initial collision, a sequence of repeated gradually quickening collisions of decreasing-to-zero intensity occurs, with the final establishment of protracted contact between the interacting bodies. The initiation conditions of the impact collapse are determined and calculation techniques for the quantitative characteristics of the corresp

Clinical and Statistical Study on Canine Impaction

Directory of Open Access Journals (Sweden)

Adina-Simona Coșarcă

2013-08-01

Full Text Available Aim: The aim of this study was to perform a clinical and statistical research on permanent impacted canine patients among those with dental impaction referred to and treated at the Oral and Maxillo-Facial Surgery Clinic of Tîrgu Mureș, over a four years period (2009-2012. Materials and methods: The study included 858 patients having dental impaction, and upon clinical records, different parameters, like frequency, gender, age, quadrant involvement, patient residence, associated complications, referring specialist and type of treatment, related to canine impaction, were assessed. Results: The study revealed: about 10% frequency of canine impaction among dental impactions; more frequent in women, in the first quadrant (tooth 13; most cases diagnosed between the age of 10-19 years; patients under 20 were referred by an orthodontist, those over 20 by a dentist; surgical exposure was more often performed than odontectomy. Conclusions: Canine impaction is the second-most frequent dental impaction in dental arch after third molars; it occurs especially in women. Due to its important role, canine recovery within dental arch is a goal to be achieved, whenever possible. Therefore, diagnose and treatment of canine impaction requires an interdisciplinary approach (surgical and orthodontic

Aboriginal oral traditions of Australian impact craters

Science.gov (United States)

Hamacher, Duane W.; Goldsmith, John

2013-11-01

In this paper we explore Aboriginal oral traditions that relate to Australian meteorite craters. Using the literature, first-hand ethnographic records and field trip data, we identify oral traditions and artworks associated with four impact sites: Gosses Bluff, Henbury, Liverpool and Wolfe Creek. Oral traditions describe impact origins for Gosses Bluff, Henbury and Wolfe Creek Craters, and non-impact origins for Liverpool Crater, with Henbury and Wolfe Creek stories having both impact and non-impact origins. Three impact sites that are believed to have been formed during human habitation of Australia -- Dalgaranga, Veevers, and Boxhole -- do not have associated oral traditions that are reported in the literature.

Methodologies of environmental impact assessment

International Nuclear Information System (INIS)

Schroll, H.

1994-01-01

This article gives a brief introduction covering the objectives of environmental impact assessment (EIA) and sustainable development, before going on to describe the screening procedure to define the environmental and socio-economic impacts of projects. The EIA procedure outlined encompasses a description of the project, examination of all environmental effects (scoping), identification of existing and predicted environmental conditions and impacts, alternative measures and mitigating measures, co-ordination, with environmental regulations, public participation, and monitoring and approval of the EIA. (UK)

48 CFR 30.606 - Resolving cost impacts.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Resolving cost impacts. 30... impacts. (a) General. (1) The CFAO shall coordinate with the affected contracting officers before negotiating and resolving the cost impact when the estimated cost impact on any of their contracts is at least...

Igneous rocks formed by hypervelocity impact

Science.gov (United States)

Osinski, Gordon R.; Grieve, Richard A. F.; Bleacher, Jacob E.; Neish, Catherine D.; Pilles, Eric A.; Tornabene, Livio L.

2018-03-01

Igneous rocks are the primary building blocks of planetary crusts. Most igneous rocks originate via decompression melting and/or wet melting of protolith lithologies within planetary interiors and their classification and compositional, petrographic, and textural characteristics, are well-studied. As our exploration of the Solar System continues, so too does the inventory of intrusive and extrusive igneous rocks, settings, and processes. The results of planetary exploration have also clearly demonstrated that impact cratering is a ubiquitous geological process that has affected, and will continue to affect, all planetary objects with a solid surface, whether that be rock or ice. It is now recognized that the production of igneous rocks is a fundamental outcome of hypervelocity impact. The goal of this review is to provide an up-to-date synthesis of our knowledge and understanding of igneous rocks formed by hypervelocity impact. Following a brief overview of the basics of the impact process, we describe how and why melts are generated during impact events and how impact melting differs from endogenic igneous processes. While the process may differ, we show that the products of hypervelocity impact can share close similarities with volcanic and shallow intrusive igneous rocks of endogenic origin. Such impact melt rocks, as they are termed, can display lobate margins and cooling cracks, columnar joints and at the hand specimen and microscopic scale, such rocks can display mineral textures that are typical of volcanic rocks, such as quench crystallites, ophitic, porphyritic, as well as features such as vesicles, flow textures, and so on. Historically, these similarities led to the misidentification of some igneous rocks now known to be impact melt rocks as being of endogenic origin. This raises the question as to how to distinguish between an impact versus an endogenic origin for igneous-like rocks on other planetary bodies where fieldwork and sample analysis may not

Computerized evaluation of flood impact

International Nuclear Information System (INIS)

Gagnon, J.; Quach, T.T.; Marche, C.; Lessard, G.

1998-01-01

A computerized evaluation process for assessing the economic impacts of a potential dam failure is described. The DOMINO software, which was developed by Hydro-Quebec, takes into account flow data from dam break simulations of floods, the territory involved, plus the economic evaluations of the real estate and infrastructures affected. Some examples of software applications and impact evaluations are presented. The principal elements involved in estimating economic or other types of impacts induced by natural flooding or dam failure, are: (1) flow forecasting, (2) defining the contour of the involved territory, and (3) accounting for the various impacts identified in the affected zone. Owing to its wide range of functions and utilities, DOMINO has proven to be a very useful, user-friendly and portable decision-making tool. 5 refs., 6 tabs

23 CFR 777.7 - Evaluation of impacts.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Evaluation of impacts. 777.7 Section 777.7 Highways... IMPACTS TO WETLANDS AND NATURAL HABITAT § 777.7 Evaluation of impacts. (a) The reasonableness of the... related to: (1) The importance of the impacted wetlands and natural habitats; (2) The extent of highway...

40 CFR 227.22 - Assessment of impact.

Science.gov (United States)

2010-07-01

... FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Impact of the Proposed Dumping on Other Uses of the Ocean § 227.22 Assessment of impact. The assessment of impact on other uses... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Assessment of impact. 227.22 Section...

Impact limiter retention using a tape joint

International Nuclear Information System (INIS)

Gonzales, A.; Eakes, R.G.

1986-01-01

The Beneficial Uses Shipping System (BUSS) Cask employs polyurethane foam impact limiters that fit onto the ends of the cask. A foam impact limiter takes energy out of a system during a hypothetical accident condition by allowing foam crush and large deformations to occur. This, in turn, precludes high stresses or deformations from occurring to the cask. Because of the need to transmit significant amounts of heat to the environment, the BUSS cask impact limiters were designed to shield a minimum amount of the cask surface area. With this design impact limiter retention after the initial impact resulting from the 9 meter regulatory drops becomes a concern. Retention is essential to ensure the cask does not experience higher stresses during any secondary or rebound effects without impact limiters than it does during the 9 meter regulatory drop with impact limiters in place

CFD based investigation on the impact acceleration when a gannet impacts with water during plunge diving

International Nuclear Information System (INIS)

Wang, T M; Yang, X B; Liang, J H; Yao, G C; Zhao, W D

2013-01-01

Plunge diving is the most commonly used feeding method of a gannet, which can make the gannet transit from air to water rapidly and successfully. A large impact acceleration can be generated due to the air-to-water transition. However, the impact acceleration experienced by the gannet during plunge diving has not been studied. In this paper, this issue is investigated by using the CFD method. The effect of the dropping height and the water-entry inclination angle on the impact acceleration is considered. The results reveal that the impact acceleration along the longitudinal body axis increases with either of the two parameters. The peak time decreases with the dropping height. A quadratic relation is found between the peak impact acceleration and the initial water-entry velocity. According to the computation, when the dropping height is 30 m (most of gannets plunge from about this height), the peak impact acceleration can reach about 23 times the gravitational acceleration, which will exert a considerable force on the gannet body. Furthermore, the pressure distribution of different water-entry inclination angles indicates that the large pressure asymmetry caused by a small oblique angle may lead to a large impact acceleration in the direction perpendicular to the longitudinal body axis and cause damage to the neck of the gannet, which partly explains the reason why a gannet performing a high plunge diving in nature enters water with a large oblique angle from the perspective of impact mechanics. The investigation on the plunge-diving behavior in this paper will inspire and promote the development of a biomimetic amphibious robot that transits from air to water with the plunge-diving mode. (paper)

Electromagnetic Effices from Impacts on Spacecraft

Science.gov (United States)

Close, Sigrid

2018-04-01

Hypervelocity micro particles, including meteoroids and space debris with masses electromagnetic pulse (EMP) with a broad frequency spectrum. Subsequent plasma oscillations resulting from instabilities can also emit significant power and may be responsible for many reported satellite anomalies. We present theory and recent results from ground-based impact tests aimed at characterizing hypervelocity impact plasma and show that impact-produced radio frequency (RF) emissions occurred in frequencies ranging from VHF through L-band and that these emissions were highly correlated with fast (> 20 km/s) impacts that produced a fully ionized plasma.

Change Agents & Impact Assessment

DEFF Research Database (Denmark)

Kørnøv, Lone; Larsen, Sanne Vammen; Hansen, Anne Merrild

2010-01-01

One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change.......One of the challenges facing impact assessment is finding ways to work in research and practice that allow appropriate action and critical interrogation og action to enable and support sustainable change....

Experimental Investigation on Low-velocity Impact and Compression After Impact Properties of Three-dimensional Five-directional Braided Composites

Directory of Open Access Journals (Sweden)

YAN Shi

2017-12-01

Full Text Available The low-velocity impact and compression after impact (CAI properties of three-dimensional (3D five-directional carbon fiber/epoxy resin braided composites were experimentally investigated. Specimens prepared with different braiding angles were tested at the same impact energy level. Residual post-impact mechanical properties of the different configurations were characterized by compression after impact tests. Results show that the specimens with bigger braiding angle sustain higher peak loads, and smaller impact damage area, mainly attributes to a more compact space construction. The CAI strength and damage mechanism are found to be mainly dependent on the axial support of the braiding fiber tows. With the increase of braiding angle, the CAI strength decreases, and the damage mode of the composites is changed from transverse fracture to shear failure.

A study on the Charpy-V impact energy and impact properties of stainless steel

International Nuclear Information System (INIS)

Han, Gill Young

1988-01-01

It has been thought that by analyzing and considering the shock strength and fracture of impact load. We can accurtely determine strength and thus it will be helpful in optimum design. In this experimental study the following results were obtained by using the instrumented impact test for SUS 316 1) The total charpy impact energy is progressively decreased by increasing the shock pressure. 2) The dynamic yield strength is increased by increasing the shock pressure for all test temperatures. 3) The ratio of dynamic yield to static yield strength was found to decrease with increasing shock pressure. (Author)

Full scale aircraft impact test for evaluation of impact forces-Part 1

International Nuclear Information System (INIS)

Von Riesemann, W.A.; Parrish, R.L.; Bickel, D.C.; Heffelfinger, S.R.; Muto, K.; Sugano, T.; Tsubota, H.; Koshika, N.; Suzuki, M.; Ohrui, S.

1989-01-01

This paper describes a test conducted at an existing rocket sled facility in which an actual F-4 Phantom aircraft was impacted at a nominal velocity of 215 m/s into an essentially rigid block of concrete. This was accomplished by supporting the F-4 on four struts that were attached to the sled track by carriage shoes to direct the path of the aircraft. Propulsion was accomplished by two stages of rockets. The concrete target was floated on a set of air bearings. Data acquisition consisted of measurements of the acceleration of the fuselage and engines of the F-4, and measurements of the displacement, velocity and acceleration of the concrete target. High-speed photograph recorded the impact process and also permitted the determination of the impact velocity. This paper describes the test plan, method and results

Effect of impact angles on ejecta and crater shape of aluminum alloy 6061-T6 targets in hypervelocity impacts

Directory of Open Access Journals (Sweden)

Hayashi K.

2012-08-01

Full Text Available The effect of the impact angle of projectiles on the crater shape and ejecta in thick aluminum alloy targets was investigated in hypervelocity impacts. When polycarbonate projectiles and aluminum alloy 6061-T6 target were used, the impact angle of the projectiles clearly affected the crater shape, as expected. The impact angle also affected the ejecta mass, ejecta size and scatter angle. However, the effect at 15∘ and 22.5∘ was not great. When the impact angles were 30∘ and 45∘, the effect was clearly confirmed. The impact angle clearly affected the axial ratio of ejecta fragments, c/a.

23 CFR 777.9 - Mitigation of impacts.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Mitigation of impacts. 777.9 Section 777.9 Highways... IMPACTS TO WETLANDS AND NATURAL HABITAT § 777.9 Mitigation of impacts. (a) Actions eligible for Federal funding. There are a number of actions that can be taken to minimize the impact of highway projects on...

Conceptualising the effectiveness of impact assessment processes

International Nuclear Information System (INIS)

Chanchitpricha, Chaunjit; Bond, Alan

2013-01-01

This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria

Conceptualising the effectiveness of impact assessment processes

Energy Technology Data Exchange (ETDEWEB)

Chanchitpricha, Chaunjit, E-mail: chaunjit@g.sut.ac.th [School of Environmental Health, Suranaree University of Technology, 111 University Avenue, Maung District, Nakhon Ratchasima 30000 (Thailand); Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ (United Kingdom); Unit for Environmental Sciences and Management School of Geo and Spatial Sciences, Internal Box 375, North West University (Potchefstroom campus) (South Africa)

2013-11-15

This paper aims at conceptualising the effectiveness of impact assessment processes through the development of a literature-based framework of criteria to measure impact assessment effectiveness. Four categories of effectiveness were established: procedural, substantive, transactive and normative, each containing a number of criteria; no studies have previously brought together all four of these categories into such a comprehensive, criteria-based framework and undertaken systematic evaluation of practice. The criteria can be mapped within a cycle/or cycles of evaluation, based on the ‘logic model’, at the stages of input, process, output and outcome to enable the identification of connections between the criteria across the categories of effectiveness. This framework is considered to have potential application in measuring the effectiveness of many impact assessment processes, including strategic environmental assessment (SEA), environmental impact assessment (EIA), social impact assessment (SIA) and health impact assessment (HIA). -- Highlights: • Conceptualising effectiveness of impact assessment processes. • Identification of factors influencing effectiveness of impact assessment processes. • Development of criteria within a framework for evaluating IA effectiveness. • Applying the logic model to examine connections between effectiveness criteria.

Impact evaluation of infrastructure interventions

DEFF Research Database (Denmark)

Hansen, Henrik; Andersen, Ole Winckler; White, Howard

2011-01-01

in this volume. Understanding impact means understanding the context in which an intervention takes place and the channels through which the impact on outcomes is expected to occur. Such analysis typically requires mixing both quantitative and qualitative approaches. The analysis will also anticipate......The focus on results in development agencies has led to increased focus on impact evaluation to demonstrate the effectiveness of development programmes. A range of methods are available for counterfactual analysis of infrastructure interventions, as illustrated by the variety of papers...

High-magnitude head impact exposure in youth football

Science.gov (United States)

Campolettano, Eamon T.; Gellner, Ryan A.; Rowson, Steven

2018-01-01

OBJECTIVE Even in the absence of a clinically diagnosed concussion, research suggests that neurocognitive changes may develop in football players as a result of frequent head impacts that occur during football games and practices. The objectives of this study were to determine the specific situations in which high-magnitude impacts (accelerations exceeding 40g) occur in youth football games and practices and to assess how representative practice activities are of games with regard to high-magnitude head impact exposure. METHODS A total of 45 players (mean age 10.7 ± 1.1 years) on 2 youth teams (Juniors [mean age 9.9 ± 0.6 years; mean body mass 38.9 ± 9.9 kg] and Seniors [mean age 11.9 ± 0.6 years; mean body mass 51.4 ± 11.8 kg]) wore helmets instrumented with accelerometer arrays to record head impact accelerations for all practices and games. Video recordings from practices and games were used to verify all high-magnitude head impacts, identify specific impact characteristics, and determine the amount of time spent in each activity. RESULTS A total of 7590 impacts were recorded, of which 571 resulted in high-magnitude head impact accelerations exceeding 40g (8%). Impacts were characterized based on the position played by the team member who received the impact, the part of the field where the impact occurred, whether the impact occurred during a game or practice play, and the cause of the impact. High-magnitude impacts occurred most frequently in the open field in both games (59.4%) and practices (67.5%). “Back” position players experienced a greater proportion of high-magnitude head impacts than players at other positions. The 2 teams in this study structured their practice sessions similarly with respect to time spent in each drill, but impact rates differed for each drill between the teams. CONCLUSIONS High-magnitude head impact exposure in games and practice drills was quantified and used as the basis for comparison of exposure in the 2 settings. In

Environmental impact assessment - a selected bibliography

International Nuclear Information System (INIS)

Lawson, W.J.

1989-01-01

This bibliography of literature relevant to the environmental impact assessment process is essentially a list of material dealing with the environmental impact assessment process held by Griffith University Library. The list is however well supplemented with citations of material not held in the Griffith University Library. Some economic and social impact assessment citations have been included in the bibliography, as the the environmental impact assessment concept has been interpreted very broadly. The citations are arranged according to broad subject areas, such as methodology, critical reviews, social impacts etc. Citations in each of these subject areas, which are listed in the table of contents, are identified by prefixes which are given in parentheses before the subjects headings. Within each subject area the citations are arragend in alphabetic author sequence

Cumulative human impacts on marine predators.

Science.gov (United States)

Maxwell, Sara M; Hazen, Elliott L; Bograd, Steven J; Halpern, Benjamin S; Breed, Greg A; Nickel, Barry; Teutschel, Nicole M; Crowder, Larry B; Benson, Scott; Dutton, Peter H; Bailey, Helen; Kappes, Michelle A; Kuhn, Carey E; Weise, Michael J; Mate, Bruce; Shaffer, Scott A; Hassrick, Jason L; Henry, Robert W; Irvine, Ladd; McDonald, Birgitte I; Robinson, Patrick W; Block, Barbara A; Costa, Daniel P

2013-01-01

Stressors associated with human activities interact in complex ways to affect marine ecosystems, yet we lack spatially explicit assessments of cumulative impacts on ecologically and economically key components such as marine predators. Here we develop a metric of cumulative utilization and impact (CUI) on marine predators by combining electronic tracking data of eight protected predator species (n=685 individuals) in the California Current Ecosystem with data on 24 anthropogenic stressors. We show significant variation in CUI with some of the highest impacts within US National Marine Sanctuaries. High variation in underlying species and cumulative impact distributions means that neither alone is sufficient for effective spatial management. Instead, comprehensive management approaches accounting for both cumulative human impacts and trade-offs among multiple stressors must be applied in planning the use of marine resources.

Impact Accelerations of Barefoot and Shod Running.

Science.gov (United States)

Thompson, M; Seegmiller, J; McGowan, C P

2016-05-01

During the ground contact phase of running, the body's mass is rapidly decelerated resulting in forces that propagate through the musculoskeletal system. The repetitive attenuation of these impact forces is thought to contribute to overuse injuries. Modern running shoes are designed to reduce impact forces, with the goal to minimize running related overuse injuries. Additionally, the fore/mid foot strike pattern that is adopted by most individuals when running barefoot may reduce impact force transmission. The aim of the present study was to compare the effects of the barefoot running form (fore/mid foot strike & decreased stride length) and running shoes on running kinetics and impact accelerations. 10 healthy, physically active, heel strike runners ran in 3 conditions: shod, barefoot and barefoot while heel striking, during which 3-dimensional motion analysis, ground reaction force and accelerometer data were collected. Shod running was associated with increased ground reaction force and impact peak magnitudes, but decreased impact accelerations, suggesting that the midsole of running shoes helps to attenuate impact forces. Barefoot running exhibited a similar decrease in impact accelerations, as well as decreased impact peak magnitude, which appears to be due to a decrease in stride length and/or a more plantarflexed position at ground contact. © Georg Thieme Verlag KG Stuttgart · New York.

Elasto-plastic impact of hemispherical shell impacting on hard rigid sphere

Science.gov (United States)

Raftopoulos, D. D.; Spicer, A. L.

1976-01-01

An analysis of plastic stress waves for cylindrical metallic projectile in impact is extended to an analysis of a hemispherical shell suffereing plastic deformation during the process of impact. It is assumed that the hemispherical shell with a prescribed launch velocity impinges a fixed rigid sphere of diameter equal to the internal diameter of the shell. The dynamic biaxial state of stress present in the shell during deformation is investigated. The analysis is valuable for studying the state of stress during large plastic deformation of a hemispherical shell.

ECONOMIC IMPACT OF CULTURAL TOURISM

Directory of Open Access Journals (Sweden)

Zrinka Zadel

2013-12-01

Full Text Available The subject of analysis in the paper is economic impact of cultural tourism and identification of the main factors which directly affect cultural tourism revenues. Most countries do not have a statistical system of monitoring and analysing individual factors of cultural tourism such as the number of arrivals of cultural tourists and consumption of cultural tourists. Therefore, it is hard to assess the economic impact of cultural tourism. In cultural tourism, cultural assets are prepared and placed on the tourist market, i.e. cultural resources are transformed into cultural tourism products. The main objective is fulfilling tourists' needs, and achieving positive effects which includes economic effects. Identification of the economic impact of cultural tourism is important because cultural resources have an inestimable value for the local community. Tourism valorisation should be used in order to achieve the necessary maximum effects with minimum negative impacts which tourism may leave on cultural resources. The objective of the paper is to identify the economic contribution of cultural tourism in the Republic of Croatia and to propose a model of identification of economic impact of cultural tourism.

Racemization of Valine by Impact-Induced Heating

Science.gov (United States)

Furukawa, Yoshihiro; Takase, Atsushi; Sekine, Toshimori; Kakegawa, Takeshi; Kobayashi, Takamichi

2018-03-01

Homochirality plays an important role in all living organisms but its origin remains unclear. It also remains unclear whether such chiral molecules survived terrestrial heavy impact events. Impacts of extraterrestrial objects on early oceans were frequent and could have affected the chirality of oceanic amino acids when such amino acids accumulated during impacts. This study investigated the effects of shock-induced heating on enantiomeric change of valine with minerals such as olivine ([Mg0.9, Fe0.1]2SiO4), hematite (Fe2O3), and calcite (CaCO3). With a shock wave generated by an impact at 0.8 km/s, both d- and l-enriched valine were significantly decomposed and partially racemized under all experimental conditions. Different minerals had different shock impedances; therefore, they provided different P-T conditions for identical impacts. Furthermore, the high pH of calcite promoted the racemization of valine. The results indicate that in natural hypervelocity impacts, amino acids in shocked oceanic water would have decomposed completely, since impact velocity and the duration of shock compression and heating are typically greater in hypervelocity impact events than those in experiments. Even with the shock wave by the impact of small and decelerated projectiles in which amino acids survive, the shock heating may generate sufficient heat for significant racemization in shocked oceanic water. However, the duration of shock induced heating by small projectiles is limited and the population of such decelerated projectiles would be limited. Therefore, even though impacts of asteroids and meteorites were frequent on the prebiotic Earth, impact events would not have significantly changed the ee of proteinogenic amino acids accumulated in the entire ocean.

Impact of GM crops on biodiversity.

Science.gov (United States)

Carpenter, Janet E

2011-01-01

The potential impact of GM crops on biodiversity has been a topic of interest both in general as well as specifically in the context of the Convention on Biological Diversity. Agricultural biodiversity has been defined at levels from genes to ecosystems that are involved or impacted by agricultural production (www.cbd.int/agro/whatis.shtml). After fifteen years of commercial cultivation, a substantial body of literature now exists addressing the potential impacts of GM crops on the environment. This review takes a biodiversity lens to this literature, considering the impacts at three levels: the crop, farm and landscape scales. Within that framework, this review covers potential impacts of the introduction of genetically engineered crops on: crop diversity, biodiversity of wild relatives, non-target soil organisms, weeds, land use, non-target above-ground organisms, and area-wide pest suppression. The emphasis of the review is peer-reviewed literature that presents direct measures of impacts on biodiversity. In addition, possible impacts of changes in management practises such as tillage and pesticide use are also discussed to complement the literature on direct measures. The focus of the review is on technologies that have been commercialized somewhere in the world, while results may emanate from non-adopting countries and regions. Overall, the review finds that currently commercialized GM crops have reduced the impacts of agriculture on biodiversity, through enhanced adoption of conservation tillage practices, reduction of insecticide use and use of more environmentally benign herbicides and increasing yields to alleviate pressure to convert additional land into agricultural use.

23 CFR 771.125 - Final environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Final environmental impact statements. 771.125 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.125 Final environmental impact statements. (a)(1..., economic, or environmental impacts of the action may need to be more fully explored; (iii) the impacts of...

The economic impact of pilgrimage: An economic impact analysis of pilgrimage expenditures in Galicia

NARCIS (Netherlands)

Graave, Elisabeth J.E.; Klijs, J.; Heijman, W.J.M.

2017-01-01

In this article, we calculate the economic impact of pilgrimage to Santiago de Compostela in the NUTS 2 region Galicia (Spain) in 2010. This economic impact is relevant to policymakers and other stakeholders dealing with religious tourism in Galicia. The analysis is based on the Input-Output model.

Impacts into Coarse-Grained Spheres at Moderate Impact Velocities: Implications for Cratering on Asteroids and Planets

Science.gov (United States)

Barnouin, Olivier S.; Daly, R. Terik; Cintala, Mark J.; Crawford, David A.

2018-01-01

The surfaces of many planets and asteroids contain coarsely fragmental material generated by impacts or other geologic processes. The presence of such pre-existing structures may affect subsequent impacts, particularly when the width of the shock is comparable to or smaller than the size of pre-existing structures. Reasonable theoretical predictions and low speed (<300m/s) impact experiments suggest that in such targets the cratering process should be highly dissipative, which would reduce cratering efficiencies and cause a rapid decay in ejection velocity as a function of distance from the impact point. In this study, we assess whether these results apply at higher impact speeds between 0.5 and 2.5 km s-1. This study shows little change in cratering efficiency when 3.18 mm diameter glass beads are launched into targets composed of these same beads. These impacts are very efficient, and ejection velocity decays slowly as function of distance from the impact point. This slow decay in ejection velocity probably indicates a correspondingly slow decay of the shock stresses. However, these experiments reveal that initial interactions between projectile and target strongly influence the cratering process and lead to asymmetries in crater shape and ejection angles, as well as significant variations in ejection velocity at a given launch position. Such effects of asymmetric coupling could be further enhanced by heterogeneity in the initial distribution of grains in the target and by mechanical collisions between grains. These experiments help to explain why so few craters are seen on the rubble-pile asteroid Itokawa: impacts into its coarsely fragmental surface by projectiles comparable to or smaller than the size of these fragments likely yield craters that are not easily recognizable.

Kinesiological characterization of choku-tsuki done with impact and its comparison with its execution without impact

Directory of Open Access Journals (Sweden)

António M. VencesBrito

2012-06-01

Full Text Available Aim: This work aims to characterize the kinematics and electromyography of a basic karate punch (choku-zuki made with an impact on a target (makiwara by experienced karateka, and compares it with the execution without real impact on the target (control. This characterization allows to the coach (sensei to know how training influences the performance of the punch in each one of these circumstances, and from that information it is possible to define strategies of training that considers adapted to its goals.Method: In a sample of ten male karateka of the Portuguese Karaté Team the kinematic and electromyographic data of the arm and forearm segments were collected during the execution of choku-zuki, with impact and no impact.Results: It was found that the kinematics and neuromuscular activity in the performance of choku-zuki happens in a time interval less than 300ms. The studied muscles activity and segments of the upper limb shows a trend of activation sequence with a proximal to distal direction, with the intervening segment arm muscles having a greater intensity of activation that the muscles involved in the forearm segment. The arm flexion at the shoulder joint and the forearm extension at the elbow joint are done with greater amplitude, and the forearm pronation is not complete at the time of impact. The forearm pronation at the elbow joint is not complete and tends to be the first segmental movement in the choku-zuki execution.Conclusion: The executions of choku-zuki with impact and no impact are kinesiologically different. This difference highlights the importance that coaches should provide to teach and training the punch execution with an effective impact on the target.

Structural design for aircraft impact loading

International Nuclear Information System (INIS)

Schmidt, R.; Heckhausen, H.; Chen, C.; Rieck, P.J.; Lemons, G.W.

1977-01-01

The Soft Shell-Hardcore approach to nuclear power plant auxiliary structure design was developed to attenuate the crash effects of impacting aircraft. This report is an initial investigation into defining the important structural features involved that would allow the Soft Shell-Hardcore design to successfully sustain the postulated aircraft impact. Also specified for purposes of this study are aircraft impact locations and the type and velocity of impacting aircraft. The purpose of this initial investigation is to determine the feasibility of the two 0.5 m thick walls of the Soft Shell with the simplest possible mathematical model

Study of Impact Damage in PVA-ECC Beam under Low-Velocity Impact Loading Using Piezoceramic Transducers and PVDF Thin-Film Transducers.

Science.gov (United States)

Qi, Baoxin; Kong, Qingzhao; Qian, Hui; Patil, Devendra; Lim, Ing; Li, Mo; Liu, Dong; Song, Gangbing

2018-02-24

Compared to conventional concrete, polyvinyl alcohol fiber reinforced engineering cementitious composite (PVA-ECC) offers high-strength, ductility, formability, and excellent fatigue resistance. However, impact-induced structural damage is a major concern and has not been previously characterized in PVA-ECC structures. We investigate the damage of PVA-ECC beams under low-velocity impact loading. A series of ball-drop impact tests were performed at different drop weights and heights to simulate various impact energies. The impact results of PVA-ECC beams were compared with mortar beams. A combination of polyvinylidene fluoride (PVDF) thin-film sensors and piezoceramic-based smart aggregate were used for impact monitoring, which included impact initiation and crack evolution. Short-time Fourier transform (STFT) of the signal received by PVDF thin-film sensors was performed to identify impact events, while active-sensing approach was utilized to detect impact-induced crack evolution by the attenuation of a propagated guided wave. Wavelet packet-based energy analysis was performed to quantify failure development under repeated impact tests.

Under the radar: mitigating enigmatic ecological impacts.

Science.gov (United States)

Raiter, Keren G; Possingham, Hugh P; Prober, Suzanne M; Hobbs, Richard J

2014-11-01

Identifying the deleterious ecological effects of developments, such as roads, mining, and urban expansion, is essential for informing development decisions and identifying appropriate mitigation actions. However, there are many types of ecological impacts that slip 'under the radar' of conventional impact evaluations and undermine the potential for successful impact mitigation (including offsets). These 'enigmatic' impacts include those that are small but act cumulatively; those outside of the area directly considered in the evaluation; those not detectable with the methods, paradigms, or spatiotemporal scales used to detect them; those facilitated, but not directly caused, by development; and synergistic impact interactions. Here, we propose a framework for conceptualising enigmatic impacts and discuss ways to address them. Copyright © 2014 Elsevier Ltd. All rights reserved.

GIS based procedure of cumulative environmental impact assessment.

Science.gov (United States)

Balakrishna Reddy, M; Blah, Baiantimon

2009-07-01

Scale and spatial limits of impact assessment study in a GIS platform are two very important factors that could have a bearing on the genuineness and quality of impact assessment. While effect of scale has been documented and well understood, no significant study has been carried out on spatial considerations in an impact assessment study employing GIS technique. A novel technique of impact assessment demonstrable through GIS approach termed hereby as 'spatial data integrated GIS impact assessment method (SGIAM)' is narrated in this paper. The technique makes a fundamental presumption that the importance of environmental impacts is dependent, among other things, on spatial distribution of the effects of the proposed action and of the affected receptors in a study area. For each environmental component considered (e.g., air quality), impact indices are calculated through aggregation of impact indicators which are measures of the severity of the impact. The presence and spread of environmental descriptors are suitably quantified through modeling techniques and depicted. The environmental impact index is calculated from data exported from ArcINFO, thus giving significant importance to spatial data in the impact assessment exercise.

Impacts of “metals” on human health: uncertainties in using different Life Cycle Impact Assessment (LCIA) methodologies

DEFF Research Database (Denmark)

Pizzol, Massimo; Christensen, Per; Schmidt, Jannick Højrup

This study looks into the uncertainties in determining the impact of “metals” emissions to human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different proprieties and characteristics, considered important in LCIA because of their toxicity to humans or ecosy......This study looks into the uncertainties in determining the impact of “metals” emissions to human health, in Life Cycle Impact Assessment (LCIA). Metals are diverse substances, with different proprieties and characteristics, considered important in LCIA because of their toxicity to humans...... be considered in an impact assessment focused on human health, and defined a list of 14 metals. We performed a contribution analysis in order to compare methods in relative terms; an approach successfully used in other studies. Various processes have been analyzed with 8 different LCIA methods in order...... to assess both how much each metal contributes to the total impact on human health, when only metal emissions are present, and how much metals in total contribute when also other toxic substances are included in the inventory of emissions. Differences between the methods are great and due...

Impact strength on fiber-reinforced hybrid composite

International Nuclear Information System (INIS)

Firdaus, S M; Nurdina; Ariff, M Azmil

2013-01-01

Acrylonitrile-Butadiene-Styrene (ABS) has been well known composite in automotive players to have light weight with high impact strength material compared to sheet metal material which has high impact strength but heavy in weight. In this project, the impact strength properties of fabricated pure ABS were compared to the eight samples of hybrid ABS composite with different weight percentages of short fibers and particle sizes of ground rubber. The objective was to improve the impact strength in addition of short fibers and ground rubber particles. These samples were then characterized using an un-notched Izod impact test. Results show that the increasing of filler percentage yielded an adverse effect on the impact strength of the hybrid composite. The effect of the ground rubber particulate sizes however are deemed to be marginal than the effect of varying filler percentage based on the collected impact strength data from all physically tested hybrid composites

The impact and effectiveness of health impact assessment: A conceptual framework

International Nuclear Information System (INIS)

Harris-Roxas, Ben; Harris, Elizabeth

2013-01-01

The use of health impact assessment (HIA) has expanded rapidly and there are increasing demands for it to demonstrate its effectiveness. This paper presents a conceptual framework for evaluating HIA and describes its development through (i) a review of the literature, (ii) a review of work undertaken as part of a major HIA capacity building project and (iii) an in-depth study of seven completed HIAs. The framework emphasises context, process and impacts as key domains in understanding and evaluating the effectiveness of an HIA. This new framework builds upon the existing approaches to evaluating HIA and extends them to reflect the broad range of factors that comprise and influence the effectiveness of HIAs. It may be of use in evaluating completed HIAs and in planning HIAs that are yet to be undertaken. -- Highlights: ► The first empirically-derived conceptual framework for evaluating HIA ► It may also be useful for planning and reporting on HIAs. ► The framework emphasises context, process and impacts as key domains. ► A broad range of factors influence the effectiveness of HIAs

Population Dynamics and Air Pollution: The Impact of Demographics on Health Impact Assessment of Air Pollution

Directory of Open Access Journals (Sweden)

Esben Meulengracht Flachs

2013-01-01

Full Text Available Objective. To explore how three different assumptions on demographics affect the health impact of Danish emitted air pollution in Denmark from 2005 to 2030, with health impact modeled from 2005 to 2050. Methods. Modeled air pollution from Danish sources was used as exposure in a newly developed health impact assessment model, which models four major diseases and mortality causes in addition to all-cause mortality. The modeling was at the municipal level, which divides the approximately 5.5 M residents in Denmark into 99 municipalities. Three sets of demographic assumptions were used: (1 a static year 2005 population, (2 morbidity and mortality fixed at the year 2005 level, or (3 an expected development. Results. The health impact of air pollution was estimated at 672,000, 290,000, and 280,000 lost life years depending on demographic assumptions and the corresponding social costs at 430.4 M€, 317.5 M€, and 261.6 M€ through the modeled years 2005–2050. Conclusion. The modeled health impact of air pollution differed widely with the demographic assumptions, and thus demographics and assumptions on demographics played a key role in making health impact assessments on air pollution.

Adaptation strategies for health impacts of climate change in Western Australia: Application of a Health Impact Assessment framework

International Nuclear Information System (INIS)

Spickett, Jeffery T.; Brown, Helen L.; Katscherian, Dianne

2011-01-01

Climate change is one of the greatest challenges facing the globe and there is substantial evidence that this will result in a number of health impacts, regardless of the level of greenhouse gas mitigation. It is therefore apparent that a combined approach of mitigation and adaptation will be required to protect public health. While the importance of mitigation is recognised, this project focused on the role of adaptation strategies in addressing the potential health impacts of climate change. The nature and magnitude of these health impacts will be determined by a number of parameters that are dependent upon the location. Firstly, climate change will vary between regions. Secondly, the characteristics of each region in terms of population and the ability to adapt to changes will greatly influence the extent of the health impacts that are experienced now and into the future. Effective adaptation measures therefore need to be developed with these differences in mind. A Health Impact Assessment (HIA) framework was used to consider the implications of climate change on the health of the population of Western Australia (WA) and to develop a range of adaptive responses suited to WA. A broad range of stakeholders participated in the HIA process, providing informed input into developing an understanding of the potential health impacts and potential adaptation strategies from a diverse sector perspective. Potential health impacts were identified in relation to climate change predictions in WA in the year 2030. The risk associated with each of these impacts was assessed using a qualitative process that considered the consequences and the likelihood of the health impact occurring. Adaptations were then developed which could be used to mitigate the identified health impacts and provide responses which could be used by Government for future decision making. The periodic application of a HIA framework is seen as an ideal tool to develop appropriate adaptation strategies to

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix O: Economic and Social Impact.

Energy Technology Data Exchange (ETDEWEB)

Columbia River System Operation Review (U.S.)

1995-11-01

This Appendix O of the Final Environmental Impact Statement for the Columbia River System measures the economic and social effects of the alternative system operation strategies and includes both geographic and methodology components. Areas discussed in detail include the following: purpose, scope and process; an economic history of the Columbia River Basin and its use today including the Columbia River and Socio-economic development in the Northwest and Major uses of the River System; Analysis procedures and methodologies including national economic evaluation, the concepts, analysis of assumptions, analysis for specific river uses, water quality, Regional evaluation, analysis, and social impacts; alternatives and impacts including implementation costs, andromous fish, resident fish and wildlife, flood control, irrigation and municipal and industrial water supply, navigation impacts, power, recreation, annual costs, regional economic analysis. Extensive comparison of alternatives is included.

Columbia River system operation review: Final environmental impact statement. Appendix O, economic and social impact

International Nuclear Information System (INIS)

1995-11-01

This Appendix O of the Final Environmental Impact Statement for the Columbia River System measures the economic and social effects of the alternative system operation strategies and includes both geographic and methodology components. Areas discussed in detail include the following: purpose, scope and process; an economic history of the Columbia River Basin and its use today including the Columbia River and Socio-economic development in the Northwest and Major uses of the River System; Analysis procedures and methodologies including national economic evaluation, the concepts, analysis of assumptions, analysis for specific river uses, water quality, Regional evaluation, analysis, and social impacts; alternatives and impacts including implementation costs, andromous fish, resident fish and wildlife, flood control, irrigation and municipal and industrial water supply, navigation impacts, power, recreation, annual costs, regional economic analysis. Extensive comparison of alternatives is included

Environmental impact assessment of fish farm hatcheries ...

African Journals Online (AJOL)

Environmental impact assessment of fish farm hatcheries management in lower ... Environmental impact assessments were taken to determine the causes of ... Of significance of impact assessment were activities like air, traffic, noise, had ...

Ejecta evolution during cone impact

KAUST Repository

Marston, Jeremy; Thoroddsen, Sigurdur T

2014-01-01

-similarity for all impact speeds for very low surface tension liquids, whilst for high-surface tension liquids similarity is only achieved at high impact speeds. We find that the ejecta tip can detach from the cone and that this phenomenon can be attributed

Air-cushioning in impact problems

KAUST Repository

Moore, M. R.; Ockendon, J. R.; Oliver, J. M.

2013-01-01

This paper concerns the displacement potential formulation of the post-impact influence of an air-cushioning layer on the 2D impact of a liquid half-space by a rigid body. The liquid and air are both ideal and incompressible and attention

Head Impact Biomechanics in Women's College Soccer.

Science.gov (United States)

Lynall, Robert C; Clark, Michael D; Grand, Erin E; Stucker, Jaclyn C; Littleton, Ashley C; Aguilar, Alain J; Petschauer, Meredith A; Teel, Elizabeth F; Mihalik, Jason P

2016-09-01

There are limited nonlaboratory soccer head impact biomechanics data. This is surprising given soccer's global popularity. Epidemiological data suggest that female college soccer players are at a greater concussion injury risk than their male counterparts. Therefore, the purposes of our study were to quantify head impact frequency and magnitude during women's soccer practices and games in the National Collegiate Athletic Association and to characterize these data across event type, playing position, year on the team, and segment of game (first and second halves). Head impact biomechanics were collected from female college soccer players (n = 22; mean ± SD age = 19.1 ± 0.1 yr, height = 168.0 ± 3.5 cm, mass = 63.7 ± 6.0 kg). We employed a helmetless head impact measurement device (X2 Biosystems xPatch) before each competition and practice across a single season. Peak linear and rotational accelerations were categorized based on impact magnitude and subsequently analyzed using appropriate nonparametric analyses. Overall, women's college soccer players experience approximately seven impacts per 90 min of game play. The overwhelming majority (~90%) of all head impacts were categorized into our mildest linear acceleration impact classification (10g-20g). Interestingly, a higher percentage of practice impacts in the 20g-40g range compared with games (11% vs 7%) was observed. Head impact biomechanics studies have provided valuable insights into understanding collision sports and for informing evidence-based rule and policy changes. These have included changing the football kickoff, ice hockey body checking ages, and head-to-head hits in both sports. Given soccer's global popularity, and the growing public concern for the potential long-term neurological implications of collision and contact sports, studying soccer has the potential to impact many athletes and the sports medicine professionals caring for them.

Evaluating the relative environmental impact of countries.

Science.gov (United States)

Bradshaw, Corey J A; Giam, Xingli; Sodhi, Navjot S

2010-05-03

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total) measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Evaluating the relative environmental impact of countries.

Directory of Open Access Journals (Sweden)

Corey J A Bradshaw

Full Text Available Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy 'models' can be identified. We provide novel metrics of country-specific environmental impact ranks - one proportional to total resource availability per country and an absolute (total measure of impact - that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional and 171 (absolute had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened. Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in

Evaluating the Relative Environmental Impact of Countries

Science.gov (United States)

Bradshaw, Corey J. A.; Giam, Xingli; Sodhi, Navjot S.

2010-01-01

Environmental protection is critical to maintain ecosystem services essential for human well-being. It is important to be able to rank countries by their environmental impact so that poor performers as well as policy ‘models’ can be identified. We provide novel metrics of country-specific environmental impact ranks – one proportional to total resource availability per country and an absolute (total) measure of impact – that explicitly avoid incorporating confounding human health or economic indicators. Our rankings are based on natural forest loss, habitat conversion, marine captures, fertilizer use, water pollution, carbon emissions and species threat, although many other variables were excluded due to a lack of country-specific data. Of 228 countries considered, 179 (proportional) and 171 (absolute) had sufficient data for correlations. The proportional index ranked Singapore, Korea, Qatar, Kuwait, Japan, Thailand, Bahrain, Malaysia, Philippines and Netherlands as having the highest proportional environmental impact, whereas Brazil, USA, China, Indonesia, Japan, Mexico, India, Russia, Australia and Peru had the highest absolute impact (i.e., total resource use, emissions and species threatened). Proportional and absolute environmental impact ranks were correlated, with mainly Asian countries having both high proportional and absolute impact. Despite weak concordance among the drivers of environmental impact, countries often perform poorly for different reasons. We found no evidence to support the environmental Kuznets curve hypothesis of a non-linear relationship between impact and per capita wealth, although there was a weak reduction in environmental impact as per capita wealth increases. Using structural equation models to account for cross-correlation, we found that increasing wealth was the most important driver of environmental impact. Our results show that the global community not only has to encourage better environmental performance in less

Evaluating impact level of different factors in environmental impact assessment for incinerator plants using GM (1, N) model.

Science.gov (United States)

Pai, T Y; Chiou, R J; Wen, H H

2008-01-01

In this study, the impact levels in environmental impact assessment (EIA) reports of 10 incinerator plants were quantified and discussed. The relationship between the quantified impact levels and the plant scale factors of BeiTou, LiZe, BaLi, LuTsao, RenWu, PingTung, SiJhou and HsinChu were constructed, and the impact levels of the GangShan (GS) and YongKong (YK) plants were predicted using grey model GM (1, N). Finally, the effects of plant scale factors on impact levels were evaluated using grey model GM (1, N) too. According to the predicted results of GM, the relative errors of topography/geology/soil, air quality, hydrology/water quality, solid waste, noise, terrestrial fauna/flora, aquatic fauna/flora and traffic in the GS plant were 17%, 14%, 15%, 17%, 75%, 16%, 13%, and 37%, respectively. The relative errors of the same environmental items in the YK plant were 1%, 18%, 10%, 40%, 37%, 3%, 25% and 33%, respectively. According to GM (1, N), design capacity (DC) and heat value (HV) were the plant scale factors that affected the impact levels significantly in each environmental item, and thus were the most significant plant scale factors. GM (1, N) was effective in predicting the environmental impact and analyzing the reasonableness of the impact. If there is an EIA for a new incinerator plant to be reviewed in the future, the official committee of the Taiwan EPA could review the reasonableness of impact levels in EIA reports quickly.

Impact assessment of ionising radiation on wildlife

International Nuclear Information System (INIS)

Copplestone, D.; Bielby, S.; Jones, S.

2001-01-01

This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on the impacts of ionising radiation on wildlife, upon which a robust assessment approach may be developed. This approach will also feed into the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET), due to complete in October 2003. This report describes the behaviour and transport of radionuclides in the environment, considers the impact of ionising radiation on wildlife, and makes recommendations on an approach for the impact assessment of ionising radiation on wildlife for England and Wales. The assessment approach focuses on three ecosystems representative of those considered potentially most at risk from the impact of authorised radioactive discharges, namely a coastal grassland (terrestrial ecosystem); estuarine and freshwater ecosystems. The likely scale of the impact on wildlife is also assessed in light of a preliminary analysis based on this assessment approach. The aims of the report are: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; an outline and review of the relevant European and national legislation which has impacts on the requirements for assessments of the impact of ionising radiation on wildlife in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach to assess the impacts to wildlife from ionising radiation from authorised discharges in England and Wales, with spreadsheets to support the methodology. The report demonstrates the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on exposure pathways in those

Monotonic and cyclic responses of impact polypropylene and continuous glass fiber-reinforced impact polypropylene composites at different strain rates

KAUST Repository

Yudhanto, Arief; Lubineau, Gilles; Wafai, Husam; Mulle, Matthieu; Pulungan, Ditho Ardiansyah; Yaldiz, R.; Verghese, N.

2016-01-01

Impact copolymer polypropylene (IPP), a blend of isotactic polypropylene and ethylene-propylene rubber, and its continuous glass fiber composite form (glass fiber-reinforced impact polypropylene, GFIPP) are promising materials for impact

The impact of gambling advertising: Problem gamblers report stronger impacts on involvement, knowledge, and awareness than recreational gamblers.

Science.gov (United States)

Hanss, Daniel; Mentzoni, Rune A; Griffiths, Mark D; Pallesen, Ståle

2015-06-01

Although there is a general lack of empirical evidence that advertising influences gambling participation, the regulation of gambling advertising is hotly debated among academic researchers, treatment specialists, lobby groups, regulators, and policymakers. This study contributes to the ongoing debate by investigating perceived impacts of gambling advertising in a sample of gamblers drawn from the general population in Norway (n = 6,034). Three dimensions of advertising impacts were identified, representing perceived impacts on (a) gambling-related attitudes, interest, and behavior ("involvement"); (b) knowledge about gambling options and providers ("knowledge"); and (c) the degree to which people are aware of gambling advertising ("awareness"). Overall, impacts were strongest for the knowledge dimension, and, for all 3 dimensions, the impact increased with level of advertising exposure. Those identified as problem gamblers in the sample (n = 57) reported advertising impacts concerning involvement more than recreational gamblers, and this finding was not attributable to differences in advertising exposure. Additionally, younger gamblers reported stronger impacts on involvement and knowledge but were less likely to agree that they were aware of gambling advertising than older gamblers. Male gamblers were more likely than female gamblers to report stronger impacts on both involvement and knowledge. These findings are discussed with regard to existing research on gambling advertising as well as their implications for future research and policy-making. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

High Pressure Quick Disconnect Particle Impact Tests

Science.gov (United States)

Rosales, Keisa R.; Stoltzfus, Joel M.

2009-01-01

NASA Johnson Space Center White Sands Test Facility (WSTF) performed particle impact testing to determine whether there is a particle impact ignition hazard in the quick disconnects (QDs) in the Environmental Control and Life Support System (ECLSS) on the International Space Station (ISS). Testing included standard supersonic and subsonic particle impact tests on 15-5 PH stainless steel, as well as tests performed on a QD simulator. This paper summarizes the particle impact tests completed at WSTF. Although there was an ignition in Test Series 4, it was determined the ignition was caused by the presence of a machining imperfection. The sum of all the test results indicates that there is no particle impact ignition hazard in the ISS ECLSS QDs. KEYWORDS: quick disconnect, high pressure, particle impact testing, stainless steel

Terrestrial Analogs for Surface Properties Associated with Impact Cratering on the Moon - Self-secondary Impact Features at Kings Bowl, Idaho

Science.gov (United States)

Matiella Novak, M. A.; Zanetti, M.; Neish, C.; Kukko, A.; Fan, K.; Heldmann, J.; Hughes, S. S.

2017-12-01

The Kings Bowl (KB) eruptive fissure and lava field, located in the southern end of Craters of the Moon National Monument, Idaho, is an ideal location for planetary analogue field studies of surface properties related to volcanic and impact processes. Here we look at possible impact features present in the KB lava field near the main vent that resulted in squeeze-ups of molten lava from beneath a semi-solid lava lake crust. These may have been caused by the ejection of blocks during the phreatic eruption that formed the Kings Bowl pit, and their subsequent impact into a partially solidified lava pond. We compare and contrast these features with analogous self-secondary impact features, such as irregular, rimless secondary craters ("splash craters") observed in lunar impact melt deposits, to better understand how self-secondary impacts determine the surface properties of volcanic and impact crater terrains. We do this by analyzing field measurements of these features, as well as high-resolution DEM data collected through the Kinematic LiDAR System (KLS), both of which give us feature dimensions and distributions. We then compare these data with self-secondary impact features on the Moon and related surface roughness constrained through Lunar Reconnaissance Orbiter observations (Mini-RF and LROC NACs). Possible self-secondary impact features can be found in association with many lunar impact craters. These are formed when ballistic ejecta from the crater falls onto the ejecta blanket and melt surrounding the newly formed crater. Self-secondary impact features involving impact melt deposits are particularly useful to study because the visibly smooth melt texture serves to highlight the impact points in spacecraft imagery. The unusual morphology of some of these features imply that they formed when the melt had not yet completely solidified, strongly suggesting a source of impactors from the primary crater itself. We will also discuss ongoing efforts to integrate field

Environmental impact assessment: Process and implementation

International Nuclear Information System (INIS)

Chen, S.Y.; Tsai, S.Y.

1989-01-01

In this paper, the procedures and issues regarding the preparation of an environmental impact assessment in accordance with the National Environmental Policy Act (NEPA) as promulgated by the US Congress in 1969 are discussed. NEPA procedures and requirements are covered in general, while particular attention is given to the preparation of the environmental impact assessment. Also included is a discussion of the social impact assessment. The aim of the social impact assessment is to address the social issues involved in enhancing public understanding of the hazardous risks, thereby mitigating any conflicts that may arise in the NEPA process. 3 refs., 1 fig., 1 tab

Managing for Sustainable Development Impact

NARCIS (Netherlands)

Kusters, C.S.L.; Batjes, Karen; Wigboldus, S.A.; Brouwers, J.H.A.M.; Dickson Baguma, Sylvester

2017-01-01

This guide is about managing development initiatives and organizations towardssustainable development impact. It builds on the work of Guijt and Woodhill inthe 2002 IFAD publication Managing for Impact in Rural Development: A Guide for Project M&E. Since then, the managing for sustainable

Air-cushioning in impact problems

KAUST Repository

Moore, M. R.

2013-05-12

This paper concerns the displacement potential formulation of the post-impact influence of an air-cushioning layer on the 2D impact of a liquid half-space by a rigid body. The liquid and air are both ideal and incompressible and attention is focussed on cases when the density ratio between the air and liquid is small. In particular, the correction to classical Wagner theory is analysed in detail for the impact of circular cylinders and wedges. © The Authors 2013. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved.

Incidence of lower second permanent molar impaction.

Science.gov (United States)

Evans, R

1988-08-01

The incidence of lower second molar impaction was investigated, comparing the records of two samples of 200 orthodontic patients referred consecutively, in 1976 and 1986. A further study compared 50 cases showing both bilateral and unilateral impactions, with a non-impacted control group. This allowed possible causes of the impactions to be examined, particularly concerning the effect of premature loss of deciduous teeth on the distribution of crowding.

Free vibration analysis of linear particle chain impact damper

Science.gov (United States)

Gharib, Mohamed; Ghani, Saud

2013-11-01

Impact dampers have gained much research interest over the past decades that resulted in several analytical and experimental studies being conducted in that area. The main emphasis of such research was on developing and enhancing these popular passive control devices with an objective of decreasing the three parameters of contact forces, accelerations, and noise levels. To that end, the authors of this paper have developed a novel impact damper, called the Linear Particle Chain (LPC) impact damper, which mainly consists of a linear chain of spherical balls of varying sizes. The LPC impact damper was designed utilizing the kinetic energy of the primary system through placing, in the chain arrangement, a small-sized ball between each two large-sized balls. The concept of the LPC impact damper revolves around causing the small-sized ball to collide multiple times with the larger ones upon exciting the primary system. This action is believed to lead to the dissipation of part of the kinetic energy at each collision with the large balls. This paper focuses on the outcome of studying the free vibration of a single degree freedom system that is equipped with the LPC impact damper. The proposed LPC impact damper is validated by means of comparing the responses of a single unit conventional impact damper with those resulting from the LPC impact damper. The results indicated that the latter is considerably more efficient than the former impact damper. In order to further investigate the LPC impact damper effective number of balls and efficient geometry when used in a specific available space in the primary system, a parametric study was conducted and its result is also explained herein. Single unit impact damper [14-16]. Multiunit impact damper [17,18]. Bean bag impact damper [19,20]. Particle/granular impact damper [21,23,22]. Resilient impact damper [24]. Buffered impact damper [25-27]. Multiunit impact damper consists of multiple masses instead of a single mass. This

Efeito da aplicação de extratos aquosos em couve na alimentação de largatas de Ascia monuste orseis Effect of aqueous vegetal extratcts application on larva feeding behavior of Ascia monuste orseis at kale

Directory of Open Access Journals (Sweden)

Cesar Augusto Manfré Medeiros

2005-01-01

Full Text Available Os efeitos de extratos aquosos de amêndoas de Azadirachta indica e frutos de Sapindus saponaria, aplicados em discos de folhas de couve (Brassica oleracea var. acephala nas concentrações de 0,0117% e 1,0342% (p/v, respectivamente, foram estudados sobre a alimentação das lagartas de Ascia monuste orseis. Avaliou-se a atratividade e o consumo de área foliar de lagartas de primeiro e terceiro ínstar durante 24 horas, em condições de laboratório (T = 25 ± 2ºC, UR = 60 ± 10% e fotofase = 12 horas. Nos testes com e sem chance de escolha, para lagartas de primeiro ínstar e teste sem chance de escolha para lagartas de terceiro ínstar, não houve diferença quanto à atratividade das lagartas. No teste com chance de escolha para lagartas de terceiro ínstar, houve menor atratividade das lagartas pelos discos de folhas tratadas com S. saponaria, diferindo da testemunha. No decorrer de 24 horas de avaliações, pode-se observar 58,3% de lagartas atraídas na testemunha, não diferindo de A. indica e diferindo de S. saponaria, com 39,3% e 2,4% das lagartas atraídas, respectivamente. Quanto ao consumo de área foliar, o extrato de S. saponaria diminuiu o consumo de lagartas, em todos os testes realizados. Quando não tinham opção de escolha para se alimentar de folhas sem os extratos, as lagartas consumiram as folhas tratadas nas concentrações testadas, porém em menor quantidade. Os extratos testados neste experimento demonstram ter efeitos sobre a alimentação das lagartas de A. monuste orseis, possivelmente com propriedades deterrentes e/ou supressoras de alimentação.The effects of aqueous extracts of Azadirachta indica almonds and of Sapindus saponaria fruits, applied on disks of kale leaves (Brassica oleracea var. acephala at concentrations of 0.0117% and 1.0342% (w/v, respectively, were studied on larval feeding behavior of Ascia monuste orseis. Data on leaves attractiveness and consumption at first and third larval instar were

Giant Impacts on Earth-Like Worlds

Science.gov (United States)

Kohler, Susanna

2016-05-01

Earth has experienced a large number of impacts, from the cratering events that may have caused mass extinctions to the enormous impact believed to have formed the Moon. A new study examines whether our planets impact history is typical for Earth-like worlds.N-Body ChallengesTimeline placing the authors simulations in context of the history of our solar system (click for a closer look). [Quintana et al. 2016]The final stages of terrestrial planet formation are thought to be dominated by giant impacts of bodies in the protoplanetary disk. During this stage, protoplanets smash into one another and accrete, greatly influencing the growth, composition, and habitability of the final planets.There are two major challenges when simulating this N-body planet formation. The first is fragmentation: since computational time scales as N^2, simulating lots of bodies that split into many more bodies is very computationally intensive. For this reason, fragmentation is usually ignored; simulations instead assume perfect accretion during collisions.Total number of bodies remaining within the authors simulations over time, with fragmentation included (grey) and ignored (red). Both simulations result in the same final number of bodies, but the ones that include fragmentation take more time to reach that final number. [Quintana et al. 2016]The second challengeis that many-body systems are chaotic, which means its necessary to do a large number of simulations to make statistical statements about outcomes.Adding FragmentationA team of scientists led by Elisa Quintana (NASA NPP Senior Fellow at the Ames Research Center) has recently pushed at these challenges by modeling inner-planet formation using a code that does include fragmentation. The team ran 140 simulations with and 140 without the effects of fragmentation using similar initial conditions to understand how including fragmentation affects the outcome.Quintana and collaborators then used the fragmentation-inclusive simulations to

Asteroids from a Martian Mega Impact

Science.gov (United States)

Kohler, Susanna

2018-04-01

Like evidence left at a crime scene, the mineral olivine may be the clue that helps scientists piece together Marss possibly violent history. Could a long-ago giant impact have flung pieces of Mars throughout our inner solar system? Two researchers from the Tokyo Institute of Technology in Japan are on the case.A Telltale MineralOlivine, a mineral that is common in Earths subsurface but weathers quickly on the surface. Olivine is a major component of Marss upper mantle. [Wilson44691]Olivine is a major component of the Martian upper mantle, making up 60% of this region by weight. Intriguingly, olivine turns up in other places in our solar system too for instance, in seven out of the nine known Mars Trojans (a group of asteroids of unknown origin that share Marss orbit), and in the rare A-type asteroids orbiting in the main asteroid belt.How did these asteroids form, and why are they so olivine-rich? An interesting explanation has been postulated: perhaps this olivine all came from the same place Mars as the result of a mega impact billions of years ago.Evidence for ImpactMars bears plenty of signs pointing to a giant impact in its past. The northern and sourthern hemispheres of Mars look very different, a phenomenon referred to as the Mars hemisphere dichotomy. The impact of a Pluto-sized body could explain the smooth Borealis Basin that covers the northern 40% of Marss surface.This high-resolution topographic map of Mars reveals the dichotomy between its northern and sourthern hemispheres. The smooth region in the northern hemisphere, the Borealis basin, may have been formed when a giant object impacted Mars billions of years ago. [NASA/JPL/USGS]Other evidence piles up: Marss orbit location, its rotation speed, the presence of its two moons all could be neatly explained by a large impact around 4 billion years ago. Could such an impact have also strewn debris from Marss mantle across the solar system?To test this theory, we need to determine if a mega impact is

Modeling occupants in far-side impacts.

Science.gov (United States)

Douglas, Clay; Fildes, Brian; Gibson, Tom

2011-10-01

Far-side impacts are not part of any regulated NCAP, FMVSS, or similar test regime despite accounting for 43 percent of the seriously injured persons and 30 percent of the harm in U.S. side impact crashes. Furthermore, injuries to the head and thorax account for over half of the serious injuries sustained by occupants in far-side crashes. Despite this, there is no regulated or well-accepted anthropomorphic test device (ATD) or computer model available to investigate far-side impacts. As such, this presents an opportunity to assess a computer model that can be used to measure the effect of varying restraint parameters on occupant biomechanics in far-side impacts. This study sets out to demonstrate the modified TASS human facet model's (MOTHMO) capabilities in modeling whole-body response in far-side impacts. MOTHMO's dynamic response was compared to that of postmortem human subjects (PMHS), WorldSID, and Thor-NT in a series of far-side sled tests. The advantages, disadvantages, and differences of using MOTHMO compared to ATDs were highlighted and described in terms of model design and instrumentation. Potential applications and improvements for MOTHMO were also recommended. The results showed that MOTHMO is capable of replicating the seat belt-to-shoulder complex interaction, pelvis impacts, head displacement, neck and shoulder belt loading from inboard mounted belts, and impacts from multiple directions. Overall, the model performed better than Thor-NT and at least as well as WorldSID when compared to PMHS results. Though WorldSID and Thor-NT ATDs were capable of reproducing many of these impact loads, measuring the seat belt-to-shoulder complex interaction and thoracic deflection at multiple sites and directions was less accurately handled. This study demonstrated that MOTHMO is capable of modeling whole-body response in far-side impacts. Furthermore, MOTHMO can be used as a virtual design tool to explore the effect of varying restraint parameters on occupant

Seismo-Acoustic Numerical Investigation of Land Impacts, Water Impacts, or Air Bursts of Asteroids

Science.gov (United States)

Ezzedine, S. M.; Dearborn, D. S.; Miller, P. L.

2017-12-01

The annual probability of an asteroid impact is low, but over time, such catastrophic events are inevitable. Interest in assessing the impact consequences has led us to develop a physics-based framework to seamlessly simulate the event from entry to impact, including air, water and ground shock propagation and wave generation. The non-linear effects are simulated using the hydrodynamics code GEODYN. As effects propagate outward, they become a wave source for the linear-elastic-wave propagation code and simulated using SAW or SWWP, depends on whether the asteroid impacts the land or the ocean, respectively. The GEODYN-SAW-SWWP coupling is based on the structured adaptive-mesh-refinement infrastructure, SAMRAI, and has been used in FEMA table-top exercises conducted in 2013 and 2014, and more recently, the 2015 Planetary Defense Conference exercise. Moreover, during atmospheric entry, asteroids create an acoustic trace that could be used to infer several physical characteristics of asteroid itself. Using SAW we explore the physical space parameters in order to rank the most important characteristics; Results from these simulations provide an estimate of onshore and offshore effects and can inform more sophisticated inundation and structural models. The capabilities of this methodology are illustrated by providing results for different impact locations, and an exploration of asteroid size on the waves arriving at the shoreline of area cities. We constructed the maximum and minimum envelops of water-wave heights or acceleration spectra given the size of the asteroid and the location of the impact along the risk corridor. Such profiles can inform emergency response and disaster-mitigation efforts. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Impact of Neutrino Oscillation Measurements on Theory

International Nuclear Information System (INIS)

Murayama, Hitoshi

2003-01-01

Neutrino oscillation data had been a big surprise to theorists, and indeed they have ongoing impact on theory. I review what the impact has been, and what measurements will have critical impact on theory in the future.

76 FR 55703 - Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings...

Science.gov (United States)

2011-09-08

..., and physical and cyber security systems. The new JOC also must meet State essential service criteria... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Environmental Impact Statement/Environmental Impact Report and Notice of Public Meetings for the Joint Operations Center Relocation Project...

Development of IMPACTS-BRC, Version 2.1

International Nuclear Information System (INIS)

Rao, R.R.; Kozak, M.W.; Rollstin, J.A.

1991-01-01

IMPACTS-BRC is a computer program developed to conduct scoping analyses for use in supporting rulemaking on petitions for exemption of waste streams from multiple producers. It was not initially intended for use on individual license applications for specific sites. However, the Federal Register, Volume 51, Number 168, specifies that IMPACTS-BRC be used to evaluate incoming license applications. This creates a problem since IMPACTS-BRC is not being used for its intended purpose. It is a generic code that is now being used for site specific applications. This is only a valid procedure if it can be shown that generic results from IMPACTS-BRC are conservative when compared to results from site specific models. Otherwise, IMPACTS-BRC should not be used. The purpose of this work was to verify that IMPACTS-BRC works as specified in its user's guide. In other words, Sandia National Laboratories (SNL) has determined that the mathematical models given in the user's guide are correctly implemented into the computer code. No direct work has been done to verify that the mathematical models used in the code are appropriate for the purpose that they are being used. In fact, scrutiny of the groundwater transport models in IMPACTS-BRC has led us to recommend that alternate geosphere models should be used. Other work carried out for this project included verifying that the input data for IMPACTS-BRC is correct and traceable. This was carried out, and a new version of the data with these qualities was produced. The new version of the data was used with the verified IMPACTS-BRC, Version 2.0 to produce IMPACTS-BRC, Version 2.1

environmental impacts of crud local government area ol impacts

African Journals Online (AJOL)

pc

2017-06-01

Jun 1, 2017 ... where oil is released into the ocean or coastal wate. Oil spills include ... L IMPACTS OF CRUDE OIL SPILLAGES ON WATER IN IBENO. OVERNMENT ..... therefore highly dangerous to drink from the water at. Upenekang ...

Regional profile, energy-impacted communities: Region VIII

Energy Technology Data Exchange (ETDEWEB)

None

1979-03-01

This report has data on population, administration, finance, housing, health and safety, human services, education, and water and sewage for 325 energy-impacted communities. A review of current and potential energy developments in the region shows over 900 energy resource impacts listed for the 325 impacted communities. Coal development represents over one-third of the developments listed. Communities reporting coal development are distributed as follows: Colorado (36), Montana (42), North Dakota (61), South Dakota (13), Utah (73), and Wyoming (35). Energy-conversion initiatives represent another high incidence of energy-resource impact, with uranium development following closely with 83 communities reporting uranium development impact in the region. These projections indicate continued development of regional energy resources to serve national energy requirements. The 325 impacted communities as reported: Colorado (46), Montana (73), North Dakota (62), South Dakota (21), Utah (80), and Wyoming (43) follow a distribution pattern similar to that of future projects which illustrates that no area of the region will escape the impacts of energy development. (ERA citation 04:041706)

Developments in Social Impact Assessment

NARCIS (Netherlands)

Vanclay, Frank

2014-01-01

Along with environmental impact assessment, social impact assessment (SIA) has its origins in the 1970s and has developed from being a tool to meet regulatory requirements, to a discipline that seeks to contribute proactively to better project and policy development and to enhance the wellbeing of

Is Environmental Impact Assessment fulfilling its potential?

DEFF Research Database (Denmark)

Larsen, Sanne Vammen

2014-01-01

fuel with CO2-neutral energy sources. A variety of these projects are subject to environmental impact assessment (EIA), which raises the following questions: What role does an impact assessment play? When is the project environmentally friendly? How are climate change-related impacts assessed......One of the topics receiving much attention in recent years is climate change and the potential of its integration in impact assessment, both in terms of achieving mitigation and adaptation. Renewable energy projects are part of the efforts to mitigate climate change, replacing the use of fossil...... adaptation is absent. Also, the results show an emphasis on positive impacts in the reports, and in a few cases discussions of enhancements. Identification and assessment of negative climate change impacts are less apparent. This leads to a discussion of the results in the light of the purpose of EIA....

Quantifying the evolution of individual scientific impact.

Science.gov (United States)

Sinatra, Roberta; Wang, Dashun; Deville, Pierre; Song, Chaoming; Barabási, Albert-László

2016-11-04

Despite the frequent use of numerous quantitative indicators to gauge the professional impact of a scientist, little is known about how scientific impact emerges and evolves in time. Here, we quantify the changes in impact and productivity throughout a career in science, finding that impact, as measured by influential publications, is distributed randomly within a scientist's sequence of publications. This random-impact rule allows us to formulate a stochastic model that uncouples the effects of productivity, individual ability, and luck and unveils the existence of universal patterns governing the emergence of scientific success. The model assigns a unique individual parameter Q to each scientist, which is stable during a career, and it accurately predicts the evolution of a scientist's impact, from the h-index to cumulative citations, and independent recognitions, such as prizes. Copyright © 2016, American Association for the Advancement of Science.

Environmental impacts of divorce

OpenAIRE

Yu, Eunice; Liu, Jianguo

2007-01-01

Divorce is increasingly common around the world. Its causes, dynamics, and socioeconomic impacts have been widely studied, but little research has addressed its environmental impacts. We found that average household size (number of people in a household) in divorced households (households with divorced heads) was 27–41% smaller than married households (households with married heads) in 12 countries across the world around the year 2000 (between 1998 and 2002). If divorced households had combi...

Planning for impact management: a systems perspective

International Nuclear Information System (INIS)

Leistritz, F.L.; Halstead, J.M.; Chase, R.A.; Murdock, S.H.

1983-01-01

The authors develop a conceptual basis for viewing impact events and their subsequent management, and thus for designing impact management programs. Following an examination of the pragmatic rationales for an impact management program for large-scale projects, such as a nuclear waste repository, they discuss the interrelated nature of impact events that clarify the need for an integrated systems-orientated socioeconomic impact management framework. They then present the key components of such a system and discusss its implementation. Although a concerted systems approach is difficult to implement and is complex in design, it will be more difficult to complete the repository siting process without one. 4 tables

Self-peeling of impacting droplets

Science.gov (United States)

de Ruiter, Jolet; Soto, Dan; Varanasi, Kripa K.

2018-01-01

Whether an impacting droplet sticks or not to a solid surface has been conventionally controlled by functionalizing the target surface or by using additives in the drop. Here we report on an unexpected self-peeling phenomenon that can happen even on smooth untreated surfaces by taking advantage of the solidification of the impacting drop and the thermal properties of the substrate. We control this phenomenon by tuning the coupling of the short-timescale fluid dynamics--leading to interfacial defects upon local freezing--and the longer-timescale thermo-mechanical stresses--leading to global deformation. We establish a regime map that predicts whether a molten metal drop impacting onto a colder substrate will bounce, stick or self-peel. In many applications, avoiding adhesion of impacting droplets around designated target surfaces can be as crucial as bonding onto them to minimize waste or cleaning. These insights have broad applicability in processes ranging from thermal spraying and additive manufacturing to extreme ultraviolet lithography.

Three dimensional contact/impact methodology

International Nuclear Information System (INIS)

Kulak, R.F.

1987-01-01

The simulation of three-dimensional interface mechanics between reactor components and structures during static contact or dynamic impact is necessary to realistically evaluate their structural integrity to off-normal loads. In our studies of postulated core energy release events, we have found that significant structure-structure interactions occur in some reactor vessel head closure designs and that fluid-structure interactions occur within the reactor vessel. Other examples in which three-dimensional interface mechanics play an important role are: (1) impact response of shipping casks containing spent fuel, (2) whipping pipe impact on reinforced concrete panels or pipe-to-pipe impact after a pipe break, (3) aircraft crash on secondary containment structures, (4) missiles generated by turbine failures or tornados, and (5) drops of heavy components due to lifting accidents. The above is a partial list of reactor safety problems that require adequate treatment of interface mechanics and are discussed in this paper

75 FR 47796 - Availability of the Draft Joint Environmental Impact Statement/Environmental Impact Report for...

Science.gov (United States)

2010-08-09

... public health and safety. The construction and long- term maintenance of the proposed Project [[Page.... Although significant impacts to biological resources (i.e., surfgrass) and recreation (i.e., surfing) are... uncertain. Likewise, if surfing is demonstrated to be significantly impacted, mitigation measures will be...

Economic impacts of a California tsunami

Science.gov (United States)

Rose, Adam; Wing, Ian Sue; Wei, Dan; Wein, Anne

2016-01-01

The economic consequences of a tsunami scenario for Southern California are estimated using computable general equilibrium analysis. The economy is modeled as a set of interconnected supply chains interacting through markets but with explicit constraints stemming from property damage and business downtime. Economic impacts are measured by the reduction of Gross Domestic Product for Southern California, Rest of California, and U.S. economies. For California, total economic impacts represent the general equilibrium (essentially quantity and price multiplier) effects of lost production in industries upstream and downstream in the supply-chain of sectors that are directly impacted by port cargo disruptions at Port of Los Angeles and Port of Long Beach (POLA/POLB), property damage along the coast, and evacuation of potentially inundated areas. These impacts are estimated to be $2.2 billion from port disruptions, $0.9 billion from property damages, and $2.8 billion from evacuations. Various economic-resilience tactics can potentially reduce the direct and total impacts by 80–85%.

Hard missile impacts on metal tubes

International Nuclear Information System (INIS)

Neilson, A.J.

1983-01-01

The UKAEA has been conducting a programme of experiments at AEE Winfrith to determine the response of typical nuclear reactor structures to impact loads and provide data for the validation of numerical assessment methods. These structures include flat panels of steel representing, for example, specifically designed impact shields or sections of large pressure-vessels and also lengths of steel piping representing, for example, primary circuit pipes or penetrations into pressure vessels. In these cases impact velocities have been approximately 100 m/s and the experimental simulations have used a compressed-air-driven missile launcher. This paper describes the analytical work completed to date with the code DYNA3D for the impact of a billet on a pipe using the Boeing Computer Services CRAY-1S facility. With this facility it was possible to produce a 16 mm film of the impact as well as the more conventional 3D graphics and time-history plots. (author)

Impact of Artificial Intelligence on Economic Theory

OpenAIRE

Tshilidzi Marwala

2015-01-01

Artificial intelligence has impacted many aspects of human life. This paper studies the impact of artificial intelligence on economic theory. In particular we study the impact of artificial intelligence on the theory of bounded rationality, efficient market hypothesis and prospect theory.

Quantitative studies on impact resistance of reinforced concrete panels with steel liners under impact loading. Part 1: Scaled model impact tests

International Nuclear Information System (INIS)

Tsubota, H.; Kasai, Y.; Koshika, N.; Morikawa, H.; Uchida, T.; Ohno, T.; Kogure, K.

1993-01-01

In recent years, extensive analytical and experimental studies have been carried out to establish a rational structural design method for nuclear power plants against local damage caused by various external missiles. Through these studies, several techniques for improving die impact resistance of reinforced concrete slabs have been proposed. Of these techniques, attaching a thin steel liner onto the impacted and/or rear face of the slab is considered to be one of the most effective methods. Muto et. al. carried out full-scale impact tests using actual aircraft engines and reported that a thin corrugated steel liner attached to the rear face of a concrete panel has a significant effect in preventing scattering of scabbed concrete debris from the rear face of the target. Based on many experimental and analytical studies, UKAEA reported that a steel liner attached to a reinforced concrete slab improves its perforation and scabbing resistance, and Walter et. al. proposed a formula for predicting the equivalent thickness of a slab with a steel liner attached. The object of this study was to evaluate quantitatively the effect of a steel liner attached to a reinforced concrete slab in preventing local damage caused by rigid missiles. To achieve the object, extensive impact tests were carried out. This paper summarizes the results of these tests

Environmental Impact Assessment: A Procedure.

Science.gov (United States)

Stover, Lloyd V.

Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

Mussel Shell Impaction in the Esophagus

Directory of Open Access Journals (Sweden)

Sunmin Kim

2013-03-01

Full Text Available Mussels are commonly used in cooking around the world. The mussel shell breaks more easily than other shells, and the edge of the broken mussel shell is sharp. Impaction can ultimately cause erosion, perforation and fistula. Aside from these complications, the pain can be very intense. Therefore, it is essential to verify and remove the shell as soon as possible. In this report we describe the process of diagnosing and treating mussel shell impaction in the esophagus. Physicians can overlook this unusual foreign body impaction due to lack of experience. When physicians encounter a patient with severe chest pain after a meal with mussels, mussel shell impaction should be considered when diagnosing and treating the patient.

The influence of headform orientation and flooring systems on impact dynamics during simulated fall-related head impacts.

Science.gov (United States)

Wright, Alexander D; Laing, Andrew C

2012-10-01

Novel compliant flooring systems are a promising approach for reducing fall-related injuries in seniors, as they may provide up to 50% attenuation in peak force during simulated hip impacts while eliciting only minimal influences on balance. This study aimed to determine the protective capacity of novel compliant floors during simulated 'high severity' head impacts compared to common flooring systems. A headform was impacted onto a common Commercial-Carpet at 1.5, 2.5, and 3.5 m/s in front, back, and side orientations using a mechanical drop tower. Peak impact force applied to the headform (F(max)), peak linear acceleration of the headform (g(max)) and Head Injury Criterion (HIC) were determined. For the 3.5 m/s trials, backwards-oriented impacts were associated with the highest F(max) and HIC values (pfloors (Resilient Rubber, Residential-Loop Carpet, Berber Carpet) and six novel compliant floors at each impact velocity. ANOVAs indicated that flooring type was associated with all parameters at each impact velocity (pfloors (pfloors can substantially reduce the forces and accelerations applied to a headform compared to common floors including carpet and resilient rubber. In combination with reports of minimal balance impairments, these findings support the promise of novel compliant floors as a biomechanically effective strategy for reducing fall-related injuries including traumatic brain injuries and skull fractures. Copyright © 2011 IPEM. Published by Elsevier Ltd. All rights reserved.

Integrated approach for characterizing and comparing exposure-based impacts with life cycle impacts

DEFF Research Database (Denmark)

Fantke, Peter; Jolliet, Olivier

2016-01-01

ions that involve burden shifting or that result in only incremental improvement. Focusing in the life cycle impacts on widely accepted and applied impact categories like global warming potential or cumulative energy demand aggregating several impact categories will lead to underestimations of life...... to the environment from product-related processes along the product life cycle. We build on a flexible mass balance-based modeling system yielding cumulative multimedia transfer fractions and exposure pathway-specific Product Intake Fractions defined as chemical mass taken in by humans per unit mass of chemical...... in a product. When combined chemical masses in products and further with toxicity information, this approach is a resourceful way to inform CAA and minimize human exposure to toxic chemicals in consumer products through both product use and environmental emissions. We use an example of chemicals in consumer...

Drill-specific head impact exposure in youth football practice.

Science.gov (United States)

Campolettano, Eamon T; Rowson, Steven; Duma, Stefan M

2016-11-01

OBJECTIVE Although 70% of football players in the United States are youth players (6-14 years old), most research on head impacts in football has focused on high school, collegiate, or professional populations. The objective of this study was to identify the specific activities associated with high-magnitude (acceleration > 40g) head impacts in youth football practices. METHODS A total of 34 players (mean age 9.9 ± 0.6 years) on 2 youth teams were equipped with helmet-mounted accelerometer arrays that recorded head accelerations associated with impacts in practices and games. Videos of practices and games were used to verify all head impacts and identify specific drills associated with each head impact. RESULTS A total of 6813 impacts were recorded, of which 408 had accelerations exceeding 40g (6.0%). For each type of practice drill, impact rates were computed that accounted for the length of time that teams spent on each drill. The tackling drill King of the Circle had the highest impact rate (95% CI 25.6-68.3 impacts/hr). Impact rates for tackling drills (those conducted without a blocker [95% CI 14.7-21.9 impacts/hr] and those with a blocker [95% CI 10.5-23.1 impacts/hr]) did not differ from game impact rates (95% CI 14.2-21.6 impacts/hr). Tackling drills were observed to have a greater proportion (between 40% and 50%) of impacts exceeding 60g than games (25%). The teams in this study participated in tackling or blocking drills for only 22% of their overall practice times, but these drills were responsible for 86% of all practice impacts exceeding 40g. CONCLUSIONS In youth football, high-magnitude impacts occur more often in practices than games, and some practice drills are associated with higher impact rates and accelerations than others. To mitigate high-magnitude head impact exposure in youth football, practices should be modified to decrease the time spent in drills with high impact rates, potentially eliminating a drill such as King of the Circle

Australian Aboriginal Geomythology: Eyewitness Accounts of Cosmic Impacts?

Science.gov (United States)

Hamacher, Duane W.; Norris, Ray P.

2009-12-01

Descriptions of cosmic impacts and meteorite falls are found throughout Australian Aboriginal oral traditions. In some cases, these texts describe the impact event in detail, sometimes citing the location, suggesting that the events were witnessed. We explore whether cosmic impacts and meteorite falls may have been witnessed by Aboriginal Australians and incorporated into their oral traditions. We discuss the complications and bias in recording and analysing oral texts but suggest that these texts may be used both to locate new impact structures or meteorites and model observed impact events. We find that, while detailed Aboriginal descriptions of cosmic impacts are abundant in the literature, there is currently no physical evidence connecting these accounts to impact events currently known to Western science.

Classification of technogenic impacts on the geological medium

International Nuclear Information System (INIS)

Trofimov, V.T.; Korolev, V.A.; Gerasimova, A.S.

1995-01-01

The available systems of classification of technology-induced impacts on the geological environment are analyzed and a classification which is elaborated by the authors and allows to break the integrated impact into individual components for their subsequent analysis, evaluation and reflection in cartographic models. This classification assumes the division of technology-induced impacts into classes and subclasses. The first class-impacts of physical nature-includes a subclass of radioactive impacts where, in its turn, two types of impacts are distinguished: radioactive contamination and radiation decontamination of the components of the geological environment. The proposed classification can serve the basis for developing standards and regulations of typification and evaluation of technology-induced impacts o the geological environment. 27 refs., 1 tab

Multisectoral Climate Impact Hotspots in a Warming World

Science.gov (United States)

Piontek, Franziska; Mueller, Christoph; Pugh, Thomas A. M.; Clark, Douglas B.; Deryng, Delphine; Elliott, Joshua; deJesusColonGonzalez, Felipe; Floerke, Martina; Folberth, Christian; Franssen, Wietse;

40 CFR 1508.11 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Environmental impact statement. 1508.11 Section 1508.11 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY TERMINOLOGY AND INDEX § 1508.11 Environmental impact statement. Environmental impact statement means a detailed written...

75 FR 8988 - Environmental Impact Statements; Availability

Science.gov (United States)

2010-02-26

... DEPARTMENT OF THE INTERIOR Environmental Impact Statements; Availability AGENCY: National Park Service. ACTION: Notice of availability for the Record of Decision on the Final Environmental Impact...) for the final Environmental Impact Statement (EIS) for the disposition of the Bureau of Mines property...

The Economic and Social Impact of Tourism

OpenAIRE

Arroyo, Gloria M; San Buenaventura, Mariano

1983-01-01

This paper analyzes the economic and social impact of tourism in Pagsanjan in which tourism development project is located. Results show that the project’s various significant impacts include increases in employment and income and stimulation of political and women’s participation. While its impact on environment and on the people’s social life has been a mixture of positive and negative results, its impact on income distribution has been trifling. To maximize the tourism multiplier, the pape...

The Microstructure of Lunar Micrometeorite Impact Craters

Science.gov (United States)

Noble, S. K.; Keller, L. P.; Christoffersen, R.; Rahman, Z.

2016-01-01

The peak of the mass flux of impactors striking the lunar surface is made up of objects approximately 200 micrometers in diameter that erode rocks, comminute regolith grains, and produce agglutinates. The effects of these micro-scale impacts are still not fully understood. Much effort has focused on evaluating the physical and optical effects of micrometeorite impacts on lunar and meteoritic material using pulsed lasers to simulate the energy deposited into a substrate in a typical hypervelocity impact. Here we characterize the physical and chemical changes that accompany natural micrometeorite impacts into lunar rocks with long surface exposure to the space environment (12075 and 76015). Transmission electron microscope (TEM) observations were obtained from cross-sections of approximately 10-20 micrometers diameter craters that revealed important micro-structural details of micrometeorite impact processes, including the creation of npFe (sup 0) in the melt, and extensive deformation around the impact site.

The climate4impact portal: bridging the CMIP5 and CORDEX data infrastructure to impact users

Science.gov (United States)

Plieger, Maarten; Som de Cerff, Wim; Pagé, Christian; Tatarinova, Natalia; Cofiño, Antonio; Vega Saldarriaga, Manuel; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Sjökvist, Elin

2015-04-01

The aim of climate4impact is to enhance the use of Climate Research Data and to enhance the interaction with climate effect/impact communities. The portal is based on 21 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. It has been developed within the European projects IS-ENES and IS-ENES2 for more than 5 years, and its development currently continues within IS-ENES2 and CLIPC. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in the ENES portal interface for climate impact communities and can be visited at www.climate4impact.eu. The climate4impact is connected to the Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and regional climate model data (RCM) data from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services using OpenID, and offers a user interface for searching, visualizing and downloading global climate model data and more. A challenging task was to describe the available model data and how it can be used. The portal tries to inform users about possible caveats when using climate model data. All impact use cases are described in the documentation section, using highlighted keywords pointing to detailed information in the glossary. During the project, the content management system Drupal was used to enable partners to contribute on the documentation section. In this presentation the architecture and following items will be detailed: - Visualization: Visualize data from ESGF data nodes using ADAGUC Web Map Services. - Processing: Transform data, subset, export into other formats, and perform climate indices calculations using

Developing drought impact functions for drought risk management

Directory of Open Access Journals (Sweden)

S. Bachmair

2017-11-01

Full Text Available Drought management frameworks are dependent on methods for monitoring and prediction, but quantifying the hazard alone is arguably not sufficient; the negative consequences that may arise from a lack of precipitation must also be predicted if droughts are to be better managed. However, the link between drought intensity, expressed by some hydrometeorological indicator, and the occurrence of drought impacts has only recently begun to be addressed. One challenge is the paucity of information on ecological and socioeconomic consequences of drought. This study tests the potential for developing empirical drought impact functions based on drought indicators (Standardized Precipitation and Standardized Precipitation Evaporation Index as predictors and text-based reports on drought impacts as a surrogate variable for drought damage. While there have been studies exploiting textual evidence of drought impacts, a systematic assessment of the effect of impact quantification method and different functional relationships for modeling drought impacts is missing. Using Southeast England as a case study we tested the potential of three different data-driven models for predicting drought impacts quantified from text-based reports: logistic regression, zero-altered negative binomial regression (hurdle model, and an ensemble regression tree approach (random forest. The logistic regression model can only be applied to a binary impact/no impact time series, whereas the other two models can additionally predict the full counts of impact occurrence at each time point. While modeling binary data results in the lowest prediction uncertainty, modeling the full counts has the advantage of also providing a measure of impact severity, and the counts were found to be reasonably predictable. However, there were noticeable differences in skill between modeling methodologies. For binary data the logistic regression and the random forest model performed similarly well based on

Lepreau 2 environmental impact statement

International Nuclear Information System (INIS)

1984-05-01

Maritime Nuclear, a joint undertaking of Atomic Energy of Canada Limited and the New Brunswick Electric Power Commission, proposes to construct a second CANDU 600 MW nuclear-powered generating unit at the site of the existing Point Lepreau Generating Station, in New Brunswick. A feasibility study is now underway and guidelines issued by the Lepreau 2 Environmental Assessment Panel identified six priority issues and concerns. These are: impacts on the biological environment, impacts of radiation on humans, impacts on the socio-economic environment, monitoring, emergency planning, and decommissioning. These factors as well as a description of the site and proposed facility are described in this report

Impact source localisation in aerospace composite structures

Science.gov (United States)

De Simone, Mario Emanuele; Ciampa, Francesco; Boccardi, Salvatore; Meo, Michele

2017-12-01

The most commonly encountered type of damage in aircraft composite structures is caused by low-velocity impacts due to foreign objects such as hail stones, tool drops and bird strikes. Often these events can cause severe internal material damage that is difficult to detect and may lead to a significant reduction of the structure’s strength and fatigue life. For this reason there is an urgent need to develop structural health monitoring systems able to localise low-velocity impacts in both metallic and composite components as they occur. This article proposes a novel monitoring system for impact localisation in aluminium and composite structures, which is able to determine the impact location in real-time without a-priori knowledge of the mechanical properties of the material. This method relies on an optimal configuration of receiving sensors, which allows linearization of well-known nonlinear systems of equations for the estimation of the impact location. The proposed algorithm is based on the time of arrival identification of the elastic waves generated by the impact source using the Akaike Information Criterion. The proposed approach was demonstrated successfully on both isotropic and orthotropic materials by using a network of closely spaced surface-bonded piezoelectric transducers. The results obtained show the validity of the proposed algorithm, since the impact sources were detected with a high level of accuracy. The proposed impact detection system overcomes current limitations of other methods and can be retrofitted easily on existing aerospace structures allowing timely detection of an impact event.

Environment and environmental impacts

OpenAIRE

Rejane de Fátima Victor Vasconcelos

2009-01-01

The article shows what can be environmental impacts and how those happen, both by the actions made by human kind and by natural disasters. Another concern of the research is the unstoppable incident of the natural resources destruction, result f the globalization actions and the economy, and that the environment impacts have happen in every direction, independently of the geographic scale, harming the life in earth, without giving importance who is the target. The article made reference to in...

Impact factor analysis: combining prediction with parameter ranking to reveal the impact of behavior on health outcome

DEFF Research Database (Denmark)

Doryab, Afsaneh; Frost, Mads; Faurholt-Jepsen, Maria

2015-01-01

An increasing number of healthcare systems allow people to monitor behavior and provide feedback on health and wellness. Most applications, however, only offer feedback on behavior in form of visualization and data summaries. This paper presents a different approach—called impact factor analysis—...... in monitoring and control of mental illness, and we argue that the impact factor analysis can be useful in the design of other health and wellness systems....... ten bipolar patients, in which we were able to estimate mood values with an average mean absolute error of 0.5. This was used to rank the behavior parameters whose variations indicate changes in the mental state. The rankings acquired from our algorithms correspond to the patients’ rankings......, identifying physical activity and sleep as the highest impact parameters. These results revealed the feasibility of identifying behavioral impact factors. This data analysis motivated us to design an impact factor inference engine as part of the MONARCA system. To our knowledge, this is a novel approach...

Liquid impact erosion mechanism and theoretical impact stress analysis in TiN-coated steam turbine blade materials

International Nuclear Information System (INIS)

Lee, M.K.; Kim, W.W.; Rhee, C.K.; Lee, W.J.

1999-01-01

Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN-coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating-substrate interface

Caecal impaction in a dog

International Nuclear Information System (INIS)

Wells, K.L.; Bright, R.M.; Wright, K.N.

1995-01-01

A seven-year-old, intact male dobermann with a four-week history of anorexia was diagnosed as having impaction of the caecum with inspissated faeces. Radiographic and histopathological findings revealed impaction of the caecum and a mild subacute locally extensive typhlitis. Typhlectomy was curative and no further problems have been reported

The Impact of Montessori Practices

Science.gov (United States)

Mushamba, Ashley; Burney, Sonya Franklin; Kent, Jacqueline

2017-01-01

This mixed methods study examined the impact of School Y's Montessori approach on their students' academic achievement, perceptions of executive functioning skills, and the school's culture. The purpose of this study was to determine the impact of length of enrollment on academic achievement in a Montessori upper elementary and middle school…

Treatment modalities of palatal impacted canines

OpenAIRE

Dimova, Cena; Papakoca, Kiro; Ristoska, Sonja; Kovacevska, Ivona

2012-01-01

Introduction: The orthodontic treatment of impacted maxillary canine remains a challenge to today’s clinicians. The treatment of this clinical entity usually involves surgical exposure of the impacted tooth, followed by orthodontic traction to guide and align it into the dental arch. The impacted palatal canine requires a combination of both treatment modalities: orthodontic management and oral surgical treatment. Two types of approach are commonly used: simple exposure, or exposure with brac...

Health impact assessment of air pollution using a dynamic exposure profile: Implications for exposure and health impact estimates

International Nuclear Information System (INIS)

Dhondt, Stijn; Beckx, Carolien; Degraeuwe, Bart; Lefebvre, Wouter; Kochan, Bruno; Bellemans, Tom; Int Panis, Luc; Macharis, Cathy; Putman, Koen

2012-01-01

In both ambient air pollution epidemiology and health impact assessment an accurate assessment of the population exposure is crucial. Although considerable advances have been made in assessing human exposure outdoors, the assessments often do not consider the impact of individual travel behavior on such exposures. Population-based exposures to NO 2 and O 3 using only home addresses were compared with models that integrate all time-activity patterns—including time in commute—for Flanders and Brussels. The exposure estimates were used to estimate the air pollution impact on years of life lost due to respiratory mortality. Health impact of NO 2 using an exposure that integrates time-activity information was on average 1.2% higher than when assuming that people are always at their home address. For ozone the overall estimated health impact was 0.8% lower. Local differences could be much larger, with estimates that differ up to 12% from the exposure using residential addresses only. Depending on age and gender, deviations from the population average were seen. Our results showed modest differences on a regional level. At the local level, however, time-activity patterns indicated larger differences in exposure and health impact estimates, mainly for people living in more rural areas. These results suggest that for local analyses the dynamic approach can contribute to an improved assessment of the health impact of various types of pollution and to the understanding of exposure differences between population groups. - Highlights: ► Exposure to ambient air pollution was assessed integrating population mobility. ► This dynamic exposure was integrated into a health impact assessment. ► Differences between the dynamic and residential exposure were quantified. ► Modest differences in health impact were found at a regional level. ► At municipal level larger differences were found, influenced by gender and age.

Are stormwater pollution impacts significant in life cycle assessment? A new methodology for quantifying embedded urban stormwater impacts.

Science.gov (United States)

Phillips, Robert; Jeswani, Harish Kumar; Azapagic, Adisa; Apul, Defne

2018-09-15

Current life cycle assessment (LCA) models do not explicitly incorporate the impacts from urban stormwater pollution. To address this issue, a framework to estimate the impacts from urban stormwater pollution over the lifetime of a system has been developed, laying the groundwork for subsequent improvements in life cycle databases and LCA modelling. The proposed framework incorporates urban stormwater event mean concentration (EMC) data into existing LCA impact categories to account for the environmental impacts associated with urban land occupation across the whole life cycle of a system. It consists of five steps: (1) compilation of inventory of urban stormwater pollutants; (2) collection of precipitation data; (3) classification and characterisation within existing midpoint impact categories; (4) collation of inventory data for impermeable urban land occupation; and (5) impact assessment. The framework is generic and can be applied to any system using any LCA impact method. Its application is demonstrated by two illustrative case studies: electricity generation and production of construction materials. The results show that pollutants in urban stormwater have an influence on human toxicity, freshwater and marine ecotoxicity, marine eutrophication, freshwater eutrophication and terrestrial ecotoxicity. Among these, urban stormwater pollution has the highest relative contribution to the eutrophication potentials. The results also suggest that stormwater pollution from urban areas can have a substantial effect on the life cycle impacts of some systems (construction materials), while for some systems the effect is small (e.g. electricity generation). However, it is not possible to determine a priori which systems are affected so that the impacts from stormwater pollution should be considered routinely in future LCA studies. The paper also proposes ways to incorporate stormwater pollution burdens into the life cycle databases. Copyright © 2018 Elsevier B.V. All

7 CFR 1948.62 - Environmental impact requirements.

Science.gov (United States)

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true Environmental impact requirements. 1948.62 Section... Development Assistance Program § 1948.62 Environmental impact requirements. (a) The policies and regulations... studied for environmental impacts. (c) Boundaries shall define the area within which the environmental...

7 CFR 1794.61 - Environmental impact statement.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Environmental impact statement. 1794.61 Section 1794..., DEPARTMENT OF AGRICULTURE (CONTINUED) ENVIRONMENTAL POLICIES AND PROCEDURES Procedure for Environmental Impact Statements § 1794.61 Environmental impact statement. An EIS shall be prepared in accordance with...

23 CFR 771.123 - Draft environmental impact statements.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Draft environmental impact statements. 771.123 Section... ENVIRONMENT ENVIRONMENTAL IMPACT AND RELATED PROCEDURES § 771.123 Draft environmental impact statements. (a) A... significant impacts on the environment. When the applicant, after consultation with any project sponsor that...

The IS-ENES climate4impact portal: bridging the CMIP5 and CORDEX data to impact users

Science.gov (United States)

Som de Cerff, Wim; Plieger, Maarten; Page, Christian; Tatarinova, Natalia; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Sjökvist, Elin; Vega Saldarriaga, Manuel; Santiago Cofiño Gonzalez, Antonio

2015-04-01

The aim of climate4impact (climate4impact.eu) is to enhance the use of Climate Research Data and to enhance the interaction with climate effect/impact communities. The portal is based on 17 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. It has been developed within the IS-ENES European project and is currently operated and further developed in the IS ENES2 project. As the climate impact community is very broad, the focus is mainly on the scientific impact community. Climate4impact is connected to the Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and regional climate model data (RCM) data from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services using OpenID, and offers a user interface for searching, visualizing and downloading global climate model data and more. A challenging task is to describe the available model data and how it can be used. The portal informs users about possible caveats when using climate model data. All impact use cases are described in the documentation section, using highlighted keywords pointing to detailed information in the glossary. Climate4impact currently has two main objectives. The first one is to work on a web interface which automatically generates a graphical user interface on WPS endpoints. The WPS calculates climate indices and subset data using OpenClimateGIS/icclim on data stored in ESGF data nodes. Data is then transmitted from ESGF nodes over secured OpenDAP and becomes available in a new, per user, secured OpenDAP server. The results can then be visualized again using ADAGUC WMS. Dedicated wizards for processing of climate indices will be developed in close

Reducing food's environmental impacts through producers and consumers.

Science.gov (United States)

Poore, J; Nemecek, T

2018-06-01

Food's environmental impacts are created by millions of diverse producers. To identify solutions that are effective under this heterogeneity, we consolidated data covering five environmental indicators; 38,700 farms; and 1600 processors, packaging types, and retailers. Impact can vary 50-fold among producers of the same product, creating substantial mitigation opportunities. However, mitigation is complicated by trade-offs, multiple ways for producers to achieve low impacts, and interactions throughout the supply chain. Producers have limits on how far they can reduce impacts. Most strikingly, impacts of the lowest-impact animal products typically exceed those of vegetable substitutes, providing new evidence for the importance of dietary change. Cumulatively, our findings support an approach where producers monitor their own impacts, flexibly meet environmental targets by choosing from multiple practices, and communicate their impacts to consumers. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Restarting TMI unit one: social and psychological impacts

International Nuclear Information System (INIS)

Sorensen, J.; Soderstrom, J.; Bolin, R.; Copenhaver, E.; Carnes, S.

1983-12-01

A technical background is provided for preparing an environmental assessment of the social and psychological impacts of restarting the undamaged reactor at Three Mile Island (TMI). Its purpose is to define the factors that may cause impacts, to define what those impacts might be, and to make a preliminary assessment of how impacts could be mitigated. It does not attempt to predict or project the magnitude of impacts. Four major research activities were undertaken: a literature review, focus-group discussions, community profiling, and community surveys. As much as possible, impacts of the accident at Unit 2 were differentiated from the possible impacts of restarting Unit 1. It is concluded that restart will generate social conflict in the TMI vicinity which could lead to adverse effects. Furthermore, between 30 and 50 percent of the population possess characteristics which are associated with vulnerability to experiencing negative impacts. Adverse effects, however, can be reduced with a community-based mitigation strategy

Restarting TMI unit one: social and psychological impacts

Energy Technology Data Exchange (ETDEWEB)

Sorensen, J.; Soderstrom, J.; Bolin, R.; Copenhaver, E.; Carnes, S.

1983-12-01

A technical background is provided for preparing an environmental assessment of the social and psychological impacts of restarting the undamaged reactor at Three Mile Island (TMI). Its purpose is to define the factors that may cause impacts, to define what those impacts might be, and to make a preliminary assessment of how impacts could be mitigated. It does not attempt to predict or project the magnitude of impacts. Four major research activities were undertaken: a literature review, focus-group discussions, community profiling, and community surveys. As much as possible, impacts of the accident at Unit 2 were differentiated from the possible impacts of restarting Unit 1. It is concluded that restart will generate social conflict in the TMI vicinity which could lead to adverse effects. Furthermore, between 30 and 50 percent of the population possess characteristics which are associated with vulnerability to experiencing negative impacts. Adverse effects, however, can be reduced with a community-based mitigation strategy.

Trail impacts and trail impact management related to ecotourism visitation at Torres del Paine National Park, Chile

Science.gov (United States)

Farrell, T.A.; Marion, J.L.

2002-01-01

Ecotourism and protected area visitation in Central and South America are largely dependent upon a relatively undisturbed quality of natural resources. However, visitation may impact vegetation, soil, water and wildlife resources, and degrade visitor facilities such as recreation sites and trails. Findings are reported from trail impact research conducted at Torres del Paine National Park in Patagonia, Chile. The frequency and magnitude of selected trail impacts and the relative effect of the amount of use, vegetation type, trail position and trail grade are investigated. Findings differed from previous studies in that amount of use was significantly related to both trail width increases and trail erosion. Management actions to minimize trail impacts are offered.

Impact analysis of a water storage tank

International Nuclear Information System (INIS)

Jhung, Myung Jo; Jo, Jong Chull; Jeong, Sang Jin

2006-01-01

This study investigates the dynamic response characteristics of a structure impacted by a high speed projectile. The impact of a 300 kg projectile on a water storage tank is simulated by the general purpose computer codes ANSYS and LS-DYNA. Several methods to simulate the impact are considered and their results are compared. Based upon this, an alternative impact analysis method that equivalent to an explicit dynamic analysis is proposed. The effect of fluid on the responses of the tank is also addressed

Radiation environmental impact assessment of copper exploitation

International Nuclear Information System (INIS)

Fan Guang; Wen Zhijian

2010-01-01

The radiation environmental impact of mineral exploitation on the surrounding environment has become a public concern. This paper presents the radiation environmental impact assessment of copper exploitation. Based on the project description and detailed investigations of surrounding environment, systematic radiation environmental impacts have been identified. The environmental impacts are assessed during both construction and operation phase. The environmental protection measures have also been proposed. The related conclusion and measures can play an active role in copper exploitation and environmental protection. (authors)

El'gygytgyn impact crater, Chukotka, Arctic Russia: Impact cratering aspects of the 2009 ICDP drilling project

Science.gov (United States)

Koeberl, Christian; Pittarello, Lidia; Reimold, Wolf Uwe; Raschke, Ulli; Brigham-Grette, Julie; Melles, Martin; Minyuk, Pavel; Spray, John

2013-01-01

The El'gygytgyn impact structure in Chukutka, Arctic Russia, is the only impact crater currently known on Earth that was formed in mostly acid volcanic rocks (mainly of rhyolitic, with some andesitic and dacitic, compositions). In addition, because of its depth, it has provided an excellent sediment trap that records paleoclimatic information for the 3.6 Myr since its formation. For these two main reasons, because of the importance for impact and paleoclimate research, El'gygytgyn was the subject of an International Continental Scientific Drilling Program (ICDP) drilling project in 2009. During this project, which, due to its logistical and financial challenges, took almost a decade to come to fruition, a total of 642.3 m of drill core was recovered at two sites, from four holes. The obtained material included sedimentary and impactite rocks. In terms of impactites, which were recovered from 316.08 to 517.30 m depth below lake bottom (mblb), three main parts of that core segment were identified: from 316 to 390 mblb polymict lithic impact breccia, mostly suevite, with volcanic and impact melt clasts that locally contain shocked minerals, in a fine-grained clastic matrix; from 385 to 423 mblb, a brecciated sequence of volcanic rocks including both felsic and mafic (basalt) members; and from 423 to 517 mblb, a greenish rhyodacitic ignimbrite (mostly monomict breccia). The uppermost impactite (316–328 mblb) contains lacustrine sediment mixed with impact-affected components. Over the whole length of the impactite core, the abundance of shock features decreases rapidly from the top to the bottom of the studied core section. The distinction between original volcanic melt fragments and those that formed later as the result of the impact event posed major problems in the study of these rocks. The sequence that contains fairly unambiguous evidence of impact melt (which is not very abundant anyway, usually less than a few volume%) is only about 75 m thick. The reason for

32 CFR 651.23 - Environmental impact statement.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Environmental impact statement. 651.23 Section...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Records and Documents § 651.23 Environmental impact statement. An Environmental Impact statement (EIS) is a detailed written statement required...

40 CFR 6.207 - Environmental impact statements.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Environmental impact statements. 6.207... ACTIONS EPA's NEPA Environmental Review Procedures § 6.207 Environmental impact statements. (a) The Responsible Official will prepare an environmental impact statement (EIS) (see 40 CFR 1508.11) for major...

39 CFR 775.11 - Environmental impact statements.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Environmental impact statements. 775.11 Section... POLICY ACT PROCEDURES § 775.11 Environmental impact statements. (a) Determining scope. Before an environmental impact statement is prepared, the following procedures must be followed to determine what issues...

Head impacts in a junior rugby league team measured with a wireless head impact sensor: an exploratory analysis.

Science.gov (United States)

King, Doug; Hume, Patria; Gissane, Conor; Clark, Trevor

2017-01-01

OBJECTIVE The aim of this study was to investigate the frequency, magnitude, and distribution of head impacts sustained by players in a junior rugby league over a season of matches. METHODS The authors performed a prospective cohort analysis of impact magnitude, frequency, and distribution on data collected with instrumented XPatches worn behind the ear of players in an "under-11" junior rugby league team (players under 11 years old). RESULTS A total of 1977 impacts were recorded. Over the course of the study, players sustained an average of 116 impacts (average of 13 impacts per player per match). The measured linear acceleration ranged from 10g to 123g (mean 22g, median 16g, and 95th percentile 57g). The rotational acceleration ranged from 89 rad/sec 2 to 22,928 rad/sec 2 (mean 4041 rad/sec 2 , median 2773 rad/sec 2 , and 95th percentile 11,384 rad/sec 2 ). CONCLUSIONS The level of impact severity based on the magnitude of impacts for linear and rotational accelerations recorded was similar to the impacts reported in studies of American junior and high school football, collegiate football, and youth ice hockey players, but the players in the rugby league cohort were younger, had less body mass, and played at a slower speed than the American players. Junior rugby league players are required to tackle the player to the ground and use a different tackle technique than that used in American football, likely increasing the rotational accelerations recorded at the head.

Permeability After Impact Testing of Composite Laminates

Science.gov (United States)

Nettles, Alan T.

2003-01-01

Since composite laminates are beginning to be identified for use in reusable launch vehicle propulsion systems, an understanding of their permeance is needed. A foreign object impact event can cause a localized area of permeability (leakage) in a polymer matrix composite and it is the aim of this study to assess a method of quantifying permeability-after-impact results. A simple test apparatus is presented and variables that could affect the measured values of permeability-after-impact were assessed. Once it was determined that valid numbers were being measured, a fiber/resin system was impacted at various impact levels and the resulting permeability measured, first with a leak check solution (qualitative) then using the new apparatus (quantitative). The results showed that as the impact level increased, so did the measured leakage. As the pressure to the specimen was increased, the leak rate was seen to increase in a non-linear fashion for almost all of the specimens tested.

Linear infrastructure impacts on landscape hydrology.

Science.gov (United States)

Raiter, Keren G; Prober, Suzanne M; Possingham, Hugh P; Westcott, Fiona; Hobbs, Richard J

2018-01-15

The extent of roads and other forms of linear infrastructure is burgeoning worldwide, but their impacts are inadequately understood and thus poorly mitigated. Previous studies have identified many potential impacts, including alterations to the hydrological functions and soil processes upon which ecosystems depend. However, these impacts have seldom been quantified at a regional level, particularly in arid and semi-arid systems where the gap in knowledge is the greatest, and impacts potentially the most severe. To explore the effects of extensive track, road, and rail networks on surface hydrology at a regional level we assessed over 1000 km of linear infrastructure, including approx. 300 locations where ephemeral streams crossed linear infrastructure, in the largely intact landscapes of Australia's Great Western Woodlands. We found a high level of association between linear infrastructure and altered surface hydrology, with erosion and pooling 5 and 6 times as likely to occur on-road than off-road on average (1.06 erosional and 0.69 pooling features km -1 on vehicle tracks, compared with 0.22 and 0.12 km -1 , off-road, respectively). Erosion severity was greater in the presence of tracks, and 98% of crossings of ephemeral streamlines showed some evidence of impact on water movement (flow impedance (62%); diversion of flows (73%); flow concentration (76%); and/or channel initiation (31%)). Infrastructure type, pastoral land use, culvert presence, soil clay content and erodibility, mean annual rainfall, rainfall erosivity, topography and bare soil cover influenced the frequency and severity of these impacts. We conclude that linear infrastructure frequently affects ephemeral stream flows and intercepts natural overland and near-surface flows, artificially changing site-scale moisture regimes, with some parts of the landscape becoming abnormally wet and other parts becoming water-starved. In addition, linear infrastructure frequently triggers or exacerbates erosion

[Current situation of clinical research on impacted premolars].

Science.gov (United States)

Liu, Ran-Ran; Tian, Jun

2018-04-01

Teeth impaction is a common developmental malformation in oral diseases. Impacted teeth are usually the canines, third molar, central incisors, premolars, and second molars. The prevalence of impaction of maxillary canines and mandibular wisdom teeth is higher than that of other teeth. Most recent studies have focused on the canines and third molars, but research on impacted premolars is limited. In clinical practice, the majority of orthodontic patients require premolar extraction. Thus, impacted premolars play important roles in orthodontic design and prognosis. This article provides an overview of recent research on impacted premolars and summarizes epidemiological features, localizations, and treatments, with the aim of guiding practitioners on orthodontic design and therapy.

Oblique and lateral impact response of the PMHS thorax.

Science.gov (United States)

Shaw, Joshua M; Herriott, Rodney G; McFadden, Joseph D; Donnelly, Bruce R; Bolte, John H

2006-11-01

This study characterizes the PMHS thoracic response to blunt impact in oblique and lateral directions. A significant amount of data has been collected from lateral impacts conducted on human cadavers. Substantially less data has been collected from impacts that are anterior of lateral in an oblique direction. In the past, data collected from the handful of oblique impact studies were considered to be similar enough to the data from purely lateral impacts such that the oblique data were combined with data from lateral impacts. Defining the biomechanical response of the PMHS thorax to oblique impact is of great importance in side impact vehicle crashes where the loading is often anterior-oblique in direction. Data in this study was obtained from a chestband placed on the thorax at the level of impact to measure thoracic deflection. Two low energy impacts were conducted on each of seven subjects at 2.5 m/s, with one lateral impact and one oblique impact to opposite sides of each PMHS. Data was normalized using the Mertz-Viano method for a two mass system to allow for inter-subject comparisons. Force versus deflection response corridors were generated for the two impact types using an objective mathematical approach and compared to one another. Results were also compared to existing data for oblique and lateral thoracic impacts. The oblique thoracic response in low speed pendulum impacts was found to be different than the lateral thoracic response, in terms of force and deflection. Specifically, the lateral force was greater than the oblique force, and oblique deflection greater than lateral deflection for equal energy impacts.

Impact microcrater morphology on Australian microtektites

Digital Repository Service at National Institute of Oceanography (India)

ShyamPrasad, M.; Khedekar, V.D.

to runlongitudinally along the microtektite; c) a “large” microtektite with a large pitless crater; d) shape does not matter: an elongated microtektitewith several erosive impacts. Fig. 3. Percentage of cratered and uncratered microtektites and the types of impacts...; b) another fragmented half of a microtektite. Here, several impacts areseen, along with cracks propagating all over the fragment; c) a fragment of a microtektite with extensive cracks propagating from an assumedcenter, along with some melt; d) a pod-shaped...

Social impacts of radioactive waste disposal

International Nuclear Information System (INIS)

1985-11-01

In this report an approach is developed for the assessment of socio-economic impacts from radioactive waste disposal. The approach provides recommendations on procedures to be used in identification and prediction of impacts. Two decision-aiding methods are also included. The first provides for the identification of key issues and the illustration of the trade-offs involved in the decision. Multi-attribute scoring and weighting techniques are then proposed for the illustration of impacts using quantitative measures. (author)

Climatic change impacts in Lombardia region

International Nuclear Information System (INIS)

Fiorese, G.; Gatto, M.; De Leo, G.

2008-01-01

Climatic change will change significantly our Country through impacts of natural and physical systems, on human health and the productive sectors. This article describes the expected impacts in Lombardia region [it

On impact fusion

International Nuclear Information System (INIS)

Winterberg, F.

1997-01-01

Impact fusion is a promising, but much less developed road towards inertial confinement fusion. It offers an excellent solution to the so-called stand-off problem for thermonuclear microexplosions but is confronted with the challenge to accelerate macroscopic particles to the needed high velocities of 10 2 -10 3 km/s. To reach these velocities, two ways have been studied in the past. The electric acceleration of a beam of microparticles, with the particles as small as large clusters, and the magnetic acceleration of gram-size ferromagnetic or superconducting projectiles. For the generation of an intense burst of soft X-rays used for the indirect drive, impact fusion may offer new promising possibilities

Reducing Impacts of Forestry

DEFF Research Database (Denmark)

Weidema, Bo Pedersen

2013-01-01

come from what would be classified as intensive forestry in the ecoinvent classification. The real challenge is to develop forest management systems that have a neutral or positive biodiversity impact relative to that of plantation forestry. Such truly extensive, biodiversity-managed forestry is very...... challenging and not very common today. Ample options exist for increasing yields in intensive and plantation forests, which can be recommended as having lower biodiversity impact than similar products from other management systems, certified or not....

NASA Lunar Impact Monitoring

Science.gov (United States)

Suggs, Robert M.; Moser, D. E.

2015-01-01

The MSFC lunar impact monitoring program began in 2006 in support of environment definition for the Constellation (return to Moon) program. Work continued by the Meteoroid Environment Office after Constellation cancellation. Over 330 impacts have been recorded. A paper published in Icarus reported on the first 5 years of observations and 126 calibrated flashes. Icarus: http://www.sciencedirect.com/science/article/pii/S0019103514002243; ArXiv: http://arxiv.org/abs/1404.6458 A NASA Technical Memorandum on flash locations is in press

Scientific impact: the story of your big hit

Science.gov (United States)

Sinatra, Roberta; Wang, Dashun; Deville, Pierre; Song, Chaoming; Barabasi, Albert-Laszlo

2014-03-01

A gradual increase in performance through learning and practice characterize most trades, from sport to music or engineering, and common sense suggests this to be true in science as well. This prompts us to ask: what are the precise patterns that lead to scientific excellence? Does performance indeed improve throughout a scientific career? Are there quantifiable signs of an impending scientific hit? Using citation-based measures as a proxy of impact, we show that (i) major discoveries are not preceded by works of increasing impact, nor are followed by work of higher impact, (ii) the precise time ranking of the highest impact work in a scientist's career is uniformly random, with the higher probability to have a major discovery in the middle of scientific careers being due only to changes in productivity, (iii) there is a strong correlation between the highest impact work and average impact of a scientist's work. These findings suggest that the impact of a paper is drawn randomly from an impact distribution that is unique for each scientist. We present a model which allows to reconstruct the individual impact distribution, making possible to create synthetic careers that exhibit the same properties of the real data and to define a ranking based on the overall impact of a scientist. RS acknowledges support from the James McDonnell Foundation.

21 CFR 25.52 - Environmental impact statements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Environmental impact statements. 25.52 Section 25... ENVIRONMENTAL IMPACT CONSIDERATIONS Public Participation and Notification of Environmental Documents § 25.52 Environmental impact statements. (a) If FDA determines that an EIS is necessary for an action involving...

Climate impact from peat utilisation in Sweden

Energy Technology Data Exchange (ETDEWEB)

Uppenberg, S.; Zetterberg, L.; Aahman, M.

2001-08-01

The climate impact from the use of peat for energy production in Sweden has been evaluated in terms of contribution to atmospheric radiative forcing. This was done by attempting to answer the question 'What will be the climate impact if one would use 1 m{sup 2} of mire for peat extraction during 20 years?'. Two different methods of after-treatment were studied: afforestation and restoration of wetland. The climate impact from a peatland - wetland energy scenario and a peatland - forestry energy scenario was compared to the climate impact from coal, natural gas and forest residues. Sensitivity analyses were performed to evaluate which parameters that are important to take into consideration in order to minimize the climate impact from peat utilisation.

Climate impact from peat utilisation in Sweden

International Nuclear Information System (INIS)

Uppenberg, S.; Zetterberg, L.; Aahman, M.

2001-08-01

The climate impact from the use of peat for energy production in Sweden has been evaluated in terms of contribution to atmospheric radiative forcing. This was done by attempting to answer the question 'What will be the climate impact if one would use 1 m 2 of mire for peat extraction during 20 years?'. Two different methods of after-treatment were studied: afforestation and restoration of wetland. The climate impact from a peatland - wetland energy scenario and a peatland - forestry energy scenario was compared to the climate impact from coal, natural gas and forest residues. Sensitivity analyses were performed to evaluate which parameters that are important to take into consideration in order to minimize the climate impact from peat utilisation

A study of the impact properties of adhesively-bonded aluminum alloy based on impact velocity

Energy Technology Data Exchange (ETDEWEB)

Gao, Teng; Cheon, Seong Sik; Cho, Jae Ung [Kongju National University, Cheonan (Korea, Republic of); Kinloch, Anthony J.; Blackman, Bamber R. K.; Sanchez, F. S. Rodriguez [Imperial College London, London (United Kingdom); Bang, Hye Jin; Lee, Sang Kyo; Cho, Chong Du [Inha University, Seoul (Korea, Republic of)

2015-02-15

In this study, an experiment and a simulation were carried out on colliding an adhesively-bonded tapered double cantilever beam (TDCB) at the impact velocities of 5 m/s, 7.5 m/s and 12.5 m/s. The analysis method of the corrected beam theory (CBT) was used to obtain the rate of energy release in the bonded area according to the crack progression, and a simulation was performed to determine the maximum strain energy during the impact analysis as a means to examine the mechanical properties of aluminium alloy. The experimental data were found to be higher than the simulation data. This is deemed to explicable by the fact that the adhesive strength was maintained even after the specimen separated in the experiment. Crack progression occurred, irrespective of the impact velocity, and high strain energy occurred at the end of the bonded region, thereby causing the strain energy to increase in the final stages. Also, the maximum load applied on the pin and the maximum strain energy in the bonded area were shown increase at higher impact velocities. The results of the experiment and simulation performed in this study are expected to serve as important data in developing a safety design for composite materials that can help prevent the progression of cracks caused by impact.

Burned forests impact water supplies

Science.gov (United States)

Dennis W. Hallema; Ge Sun; Peter V. Caldwell; Steven P. Norman; Erika C. Cohen; Yongqiang Liu; Kevin D. Bladon; Steven G. McNulty

2018-01-01

Wildland fire impacts on surface freshwater resources have not previously been measured, nor factored into regional water management strategies. But, large wildland fires are increasing and raise concerns about fire impacts on potable water. Here we synthesize longterm records of wildland fire, climate, and river flow for 168 locations across the United States. We show...

Predicting pathology in impacted mandibular third molars

Directory of Open Access Journals (Sweden)

Aveek Mukherji

2017-01-01

Full Text Available Introduction: The rising incidence of the impacted mandibular third molars and their association with pathologies is now considered a public health problem. Aims and Objectives: The objective of this study was to assess the position of impacted mandibular third molars that are prone to developing pathologies and to determine the frequency and type of pathological conditions associated with these impacted teeth to facilitate planning for their prophylactic removal. Materials and Methods: Consecutive panoramic radiographs and clinical examination of 300 patients with impacted mandibular third molars were collected. They were segregated according to Pell and Gregory’s classification, Winter’s classification, and according to their state of eruption. These were correlated with associated pathologies based on clinical and radiological criteria. Statistical Analysis Used: Descriptive statistics included computation of percentages, mean, and standard deviations. The statistical test applied for the analysis was Pearson’s Chi-square test (χ2. For this test, confidence interval and P value were set at 93% and ≤0.03, respectively. Results: The pathology most commonly associated with impacted third molars was pericoronitis, which had the highest frequency of occurrence in partially erupted, distoangular, and IA positioned (as per Pell and Gregory classification impacted teeth. Impacted mandibular third molars, which were in IA position, placed mesially, and partially erupted, were prone to develop pathologies such as dental caries and periodontitis. Conclusion: The clinical and radiographical features of impacted third molar may be correlated to the development of their pathological complications. The partially impacted mandibular third molars with mesioangularly aligned in IA position have the highest potential to cause pathological complications.

Drop "impact" on an airfoil surface.

Science.gov (United States)

Wu, Zhenlong

2018-05-17

Drop impact on an airfoil surface takes place in drop-laden two-phase flow conditions such as rain and icing, which are encountered by wind turbines or airplanes. This phenomenon is characterized by complex nonlinear interactions that manifest rich flow physics and pose unique modeling challenges. In this article, the state of the art of the research about drop impact on airfoil surface in the natural drop-laden two-phase flow environment is presented. The potential flow physics, hazards, characteristic parameters, droplet trajectory calculation, drop impact dynamics and effects are discussed. The most key points in establishing the governing equations for a drop-laden flow lie in the modeling of raindrop splash and water film. The various factors affecting the drop impact dynamics and the effects of drop impact on airfoil aerodynamic performance are summarized. Finally, the principle challenges and future research directions in the field as well as some promising measures to deal with the adverse effects of drop-laden flows on airfoil performance are proposed. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of mechanoluminescence technique for impact studies

International Nuclear Information System (INIS)

Chandra, B.P.

2011-01-01

A new technique called, mechanoluminescence technique, is developed for measuring the parameters of impact. This technique is based on the phenomenon of mechanoluminescence (ML), in which light emission takes place during any mechanical action on solids. When a small solid ball makes an impact on the mechanoluminescent thin film coated on a solid, then initially the elastico ML (EML) intensity increases with time, attains a maximum value I m at a particular time t m , and later on it decreases with time. The contact time T c of ball, can be determined from the relation T c =2t c , where t c is the time at which the EML emission due to compression of the sample becomes negligible. The area from where the EML emission occurs can be taken as the contact area A c . The maximum compression h is given by h=A c /(πr), where r is the radius of the impacting ball, and thus, h can be determined from the known values of A c and r. The maximum force at contact is given by F m =(2mU 0 )/T c , where m is the mass of the impacting ball and U 0 is the velocity of the ball at impact. The maximum impact stress σ m can be obtained from the relation, σ m =F m /A c =(2mU 0 )/(T c A c ). Thus, ML provides a real-time technique for determining the impact parameters such as T c , A c , h, F m and σ m . Using the ML technique, the impact parameters of the SrAl 2 O 4 :Eu film and ZnS:Mn coating are determined. The ML technique can be used to determine the impact parameters in the elastic region and plastic region as well as fracture. ML can also be used to determine the impact parameters for the collision between solid and liquid, if the mechanoluminescent material is coated on the surface of the solid. The measurement of fracto ML in microsecond and nanosecond range may provide a tool for studying the fragmentations in solids by the impact. Using the fast camera the contact area and the depth of compression can be determined for different intervals of time. - Research highlights: → A

Taylor impact of glass rods

International Nuclear Information System (INIS)

Willmott, G.R.; Radford, D.D.

2005-01-01

The deformation and fracture behavior of soda-lime and borosilicate glass rods was examined during classic and symmetric Taylor impact experiments for impact pressures to 4 and 10 GPa, respectively. High-speed photography and piezoresistive gauges were used to measure the failure front velocities in both glasses, and for impact pressures below ∼2 GPa the failure front velocity increases rapidly with increasing pressure. As the pressure was increased above ∼3 GPa, the failure front velocities asymptotically approached maximum values between the longitudinal and shear wave velocities of each material; at ∼4 GPa, the average failure front velocities were 4.7±0.5 and 4.6±0.5 mm μs -1 for the soda-lime and borosilicate specimens, respectively. The observed mechanism of failure in these experiments involved continuous pressure-dependent nucleation and growth of microcracks behind the incident wave. As the impact pressure was increased, there was a decrease in the time to failure. The density of cracks within the failed region was material dependent, with the more open-structured borosilicate glass showing a larger fracture density

Collocation Impact on Team Effectiveness

Directory of Open Access Journals (Sweden)

M Eccles

2010-11-01

Full Text Available The collocation of software development teams is common, specially in agile software development environments. However little is known about the impact of collocation on the team’s effectiveness. This paper explores the impact of collocating agile software development teams on a number of team effectiveness factors. The study focused on South African software development teams and gathered data through the use of questionnaires and interviews. The key finding was that collocation has a positive impact on a number of team effectiveness factors which can be categorised under team composition, team support, team management and structure and team communication. Some of the negative impact collocation had on team effectiveness relate to the fact that team members perceived that less emphasis was placed on roles, that morale of the group was influenced by individuals, and that collocation was invasive, reduced level of privacy and increased frequency of interruptions. Overall through it is proposed that companies should consider collocating their agile software development teams, as collocation might leverage overall team effectiveness.

Assessment of Containment Structures Against Missile Impact Threats

Institute of Scientific and Technical Information of China (English)

LI Q M

2006-01-01

In order to ensure the highest safety requirements,nuclear power plant structures (the containment structures,the fuel storages and transportation systems) should be assessed against all possible internal and external impact threats.The internal impact threats include kinetic missiles generated by the failure of high pressure vessels and pipes,the failure of high speed rotating machineries and accidental drops.The external impact threats may come from airborne missiles,aircraft impact,explosion blast and fragments.The impact effects of these threats on concrete and steel structures in a nuclear power plant are discussed.Methods and procedures for the impact assessment of nuclear power plants are introduced.Recent studies on penetration and perforation mechanics as well as progresses on dynamic properties of concrete-like materials are presented to increase the understanding of the impact effects on concrete containment structures.

Photon emission from massive projectile impacts on solids.

Science.gov (United States)

Fernandez-Lima, F A; Pinnick, V T; Della-Negra, S; Schweikert, E A

2011-01-01

First evidence of photon emission from individual impacts of massive gold projectiles on solids for a number of projectile-target combinations is reported. Photon emission from individual impacts of massive Au(n) (+q) (1 ≤ n ≤ 400; q = 1-4) projectiles with impact energies in the range of 28-136 keV occurs in less than 10 ns after the projectile impact. Experimental observations show an increase in the photon yield from individual impacts with the projectile size and velocity. Concurrently with the photon emission, electron emission from the impact area has been observed below the kinetic emission threshold and under unlikely conditions for potential electron emission. We interpret the puzzling electron emission and correlated luminescence observation as evidence of the electronic excitation resulting from the high-energy density deposited by massive cluster projectiles during the impact.

Public understanding of environmental impacts of electricity deregulation

International Nuclear Information System (INIS)

Johnson, Branden B.; Frank, Pamela G.

2006-01-01

Electricity deregulation has aroused concern that environmental quality might be harmed by consumer preferences for cheap, 'dirty' (e.g., coal) electricity products, despite the perhaps stronger influence of supply side policy on environmental impacts. This outcome depends on public understanding of the environmental impacts of their decisions, which this study explored with interviews, focus groups, and surveys in New Jersey. People had thought little about the topic, were unable to articulate how electricity production might affect the environment except in very general terms, and were mostly unwilling to guess whether deregulation's impacts would be negative, neutral or positive. Those who did guess expected negative impacts less than any other kind. Reactions to specific 'reasons' for expecting no, positive or negative impacts suggested that consumers had little structure to their mental models in this area; for example, people who thought positive-impact reasons were probably true were not necessarily likely to see negative-impact reasons as probably false. However, in the aggregate, people seemed to have a fairly consistent ranking of energy sources by expected negative environmental impacts. Earlier research found that consumers comparing two electricity products on environmental impacts reached different decisions if they had energy-source-only or energy-source-plus-emissions information. Although regulator-required 'environmental labels' for electricity products provide both source and emissions data, it is not clear that they do an adequate job of both alerting consumers to the possibility of negative environmental impacts and identifying the relative life-cycle impacts of different products so as to produce informed consumer decisions

Environmental Impact Section

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Section is concerned with preparation of environmental statements and assessments and development of assessment methodologies for energy technologies. During 1976, activities involved nuclear, fossil, and geothermal energy; this work was supported by the U.S.Army, HUD, US ERDA, and US NRC. Two special studies--one on the effects of power plant intake structures on fish impingement and another on multiple uses of cooling lakes--were completed and should serve as references for future analyses. Two research projects sponsored by NRC--the Unified Transport Approach (UTA) to Power Plant Assessment and the Environmental Monitoring Data Evaluation Study--were continued. The purpose of the UA program is to develop fast-transient, one- and two-dimensional transport models for estimating thermal, radiological, chemical, and biological impacts in complicated water bodies. The impact of public use of various products that contain radioactive isotope is being evaluated. The Environmental Impact Sections assistance to NRC expanded to include assessments of fuel-fabrication facilities being considered for relicensing and two uranium in-situ solution mining facility proposals. The work for HUD comprises an assessment of the first application of MIUS in a new town development. A generic environmental statement was prepared and an environmental monitoring program for the facility was designed

Characterizing Verified Head Impacts in High School Girls' Lacrosse.

Science.gov (United States)

Caswell, Shane V; Lincoln, Andrew E; Stone, Hannah; Kelshaw, Patricia; Putukian, Margot; Hepburn, Lisa; Higgins, Michael; Cortes, Nelson

2017-12-01

Girls' high school lacrosse players have higher rates of head and facial injuries than boys. Research indicates that these injuries are caused by stick, player, and ball contacts. Yet, no studies have characterized head impacts in girls' high school lacrosse. To characterize girls' high school lacrosse game-related impacts by frequency, magnitude, mechanism, player position, and game situation. Descriptive epidemiology study. Thirty-five female participants (mean age, 16.2 ± 1.2 years; mean height, 1.66 ± 0.05 m; mean weight, 61.2 ± 6.4 kg) volunteered during 28 games in the 2014 and 2015 lacrosse seasons. Participants wore impact sensors affixed to the right mastoid process before each game. All game-related impacts recorded by the sensors were verified using game video. Data were summarized for all verified impacts in terms of frequency, peak linear acceleration (PLA), and peak rotational acceleration (PRA). Descriptive statistics and impact rates were calculated. Fifty-eight verified game-related impacts ≥20 g were recorded (median PLA, 33.8 g; median PRA, 6151.1 rad/s 2 ) during 467 player-games. The impact rate for all game-related verified impacts was 0.12 per athlete-exposure (AE) (95% CI, 0.09-0.16), equivalent to 2.1 impacts per team game, indicating that each athlete suffered fewer than 2 head impacts per season ≥20 g. Of these impacts, 28 (48.3%) were confirmed to directly strike the head, corresponding with an impact rate of 0.05 per AE (95% CI, 0.00-0.10). Overall, midfielders (n = 28, 48.3%) sustained the most impacts, followed by defenders (n = 12, 20.7%), attackers (n = 11, 19.0%), and goalies (n = 7, 12.1%). Goalies demonstrated the highest median PLA and PRA (38.8 g and 8535.0 rad/s 2 , respectively). The most common impact mechanisms were contact with a stick (n = 25, 43.1%) and a player (n = 17, 29.3%), followed by the ball (n = 7, 12.1%) and the ground (n = 7, 12.1%). One hundred percent of ball impacts occurred to goalies. Most impacts

Economic impact of refugees.

Science.gov (United States)

Taylor, J Edward; Filipski, Mateusz J; Alloush, Mohamad; Gupta, Anubhab; Rojas Valdes, Ruben Irvin; Gonzalez-Estrada, Ernesto

2016-07-05

In 2015, the United Nations High Commission for Refugees accommodated over 15 million refugees, mostly in refugee camps in developing countries. The World Food Program provided these refugees with food aid, in cash or in kind. Refugees' impacts on host countries are controversial and little understood. This unique study analyzes the economic impacts of refugees on host-country economies within a 10-km radius of three Congolese refugee camps in Rwanda. Simulations using Monte Carlo methods reveal that cash aid to refugees creates significant positive income spillovers to host-country businesses and households. An additional adult refugee receiving cash aid increases annual real income in the local economy by $205 to $253, significantly more than the $120-$126 in aid each refugee receives. Trade between the local economy and the rest of Rwanda increases by $49 to $55. The impacts are lower for in-kind food aid, a finding relevant to development aid generally.

Progress of impact ignition

International Nuclear Information System (INIS)

Murakami, M.; Nagatomo, H.; Johzaki, T.

2010-11-01

In impact ignition scheme, a portion of the fuel (the impactor) is accelerated to a super-high velocity, compressed by convergence, and collided with a precompressed main fuel. This collision generates shock waves in both the impactor and the main fuel. Since the density of the impactor is generally much lower than that of the main fuel, the pressure balance ensures that the shock-heated temperature of the impactor is significantly higher than that of the main fuel. Hence, the impactor can reach ignition temperature and thus become an igniter. Here we report major new results on recent impact ignition research: (1) A maximum velocity ∼ 1000 km/s has been achieved under the operation of NIKE KrF laser at Naval Research Laboratory (laser wavelength=0.25μm) in the use of a planar target made of plastic and (2) We have performed two-dimensional simulation for burn and ignition to show the feasibility of the impact ignition. (author)

Assessment of cooling tower impact

International Nuclear Information System (INIS)

1986-01-01

This guideline describes the state of the art of the meteorological impact of wet cooling towers that are about 80 m to 170 m high, and have a waste heat power in the range of 1000 MW and 2500 MW. The physical processes occurring in the lowest layer of the atmosphere and their impact in the dispersion of cooling tower emissions are represented. On the basis of these facts, the impact on weather or climate in the vicinity of a high wet cooling tower is estimated. Thereby the results of the latest investigations (observations, measurements, and modeling) on the different locations of plants as well as their different power and construction types are taken into consideration. (orig.) [de

Impact Testing of Stainless Steel Materials

International Nuclear Information System (INIS)

R. K. Blandford; D. K. Morton; T. E. Rahl; S. D. Snow

2005-01-01

Stainless steels are used for the construction of numerous spent nuclear fuel or radioactive material containers that may be subjected to high strains and moderate strain rates (10 to 200 per second) during accidental drop events. Mechanical characteristics of these materials under dynamic (impact) loads in the strain rate range of concern are not well documented. The goal of the work presented in this paper was to improve understanding of moderate strain rate phenomena on these materials. Utilizing a drop-weight impact test machine and relatively large test specimens (1/2-inch thick), initial test efforts focused on the tensile behavior of specific stainless steel materials during impact loading. Impact tests of 304L and 316L stainless steel test specimens at two different strain rates, 25 per second (304L and 316L material) and 50 per second (304L material) were performed for comparison to their quasi-static tensile test properties. Elevated strain rate stress-strain curves for the two materials were determined using the impact test machine and a ''total impact energy'' approach. This approach considered the deformation energy required to strain the specimens at a given strain rate. The material data developed was then utilized in analytical simulations to validate the final elevated stress-strain curves. The procedures used during testing and the results obtained are described in this paper

Radiological study of bronchial mucoid impaction

International Nuclear Information System (INIS)

Yu Xiaoyi; Yan Hongzhen; Wang Tongde; Gan Chunlan; Liu Wei; Wang Linhui

1999-01-01

Objective: To evaluate the radiological findings of bronchial mucoid impaction in 28 patients in order to improve diagnostic efficacy. Methods: Standard posteroanterior high voltage radiographs were performed in all 28 cases. Among them CT scans were taken in 14 cases, while 3 patients underwent HRCT examination at the same time. Twenty-two patients had a history of expectoration of mucous plugs; in one case with pulmonary atelectasis, a mucous plug was picked out through bronchoscopy. The other 5 cases experienced a lung operation, and a tumor and bronchial mucoid impaction were discovered. Results: Radiographs showed most mucoid impaction as thick, branching structures resembling branches of tree; others were in the shapes of spherical, small clubs, and cuttle fish. In one patient, pulmonary atelectasis was the only radiographic finding. Similarly on CT, most bronchial mucoid impaction were likened to tree branches; the rest presented as small clubs and bunches of grape. A prominent feature of bronchial mucoid impaction, either on plain radiograph or on CT, was that its axis pointed to the hilum, completely consistent with the branching and distribution of the bronchi, and accompanied by bronchiectasis. Conclusions: It is an optimal approach to exploit plain radiograph combined with CT to find out bronchial mucoid impaction. An awareness of its clinical and radiological features may improve better understanding and recognition of the disease

76 FR 57720 - Notice of Intent To Prepare an Environmental Impact Statement/Overseas Environmental Impact...

Science.gov (United States)

2011-09-16

...The Department of the Navy published a document in the Federal Register (76 FR 174) on September 8, 2011, concerning public scoping meetings to support the development of an Environmental Impact Statement/Overseas Environmental Impact Statement for the Mariana Islands Training and Testing Study Area. The document contained an incorrect scoping date.

10 CFR 503.13 - Environmental impact analysis.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Environmental impact analysis. 503.13 Section 503.13... Exemptions § 503.13 Environmental impact analysis. In order to enable OFE to comply with NEPA, a petitioner..., and land resources; (3) Direct and indirect environmental impacts of the proposed action including...

Large meteorite impacts: The K/T model

Science.gov (United States)

Bohor, B. F.

1992-01-01

The Cretaceous/Tertiary (K/T) boundary event represents probably the largest meteorite impact known on Earth. It is the only impact event conclusively linked to a worldwide mass extinction, a reflection of its gigantic scale and global influence. Until recently, the impact crater was not definitively located and only the distal ejecta of this impact was available for study. However, detailed investigations of this ejecta's mineralogy, geochemistry, microstratigraphy, and textures have allowed its modes of ejection and dispersal to be modeled without benefit of a source crater of known size and location.

JEDI: Jobs and Economic Development Impact Model

Energy Technology Data Exchange (ETDEWEB)

2017-06-13

The Jobs and Economic Development Impact (JEDI) models are user-friendly tools that estimate the economic impacts of constructing and operating power generation and biofuel plants at the local (usually state) level. First developed by NREL's researchers to model wind energy jobs and impacts, JEDI has been expanded to also estimate the economic impacts of biofuels, coal, conventional hydro, concentrating solar power, geothermal, marine and hydrokinetic power, natural gas, photovoltaics, and transmission lines. This fact sheet focuses on JEDI for wind energy projects and is revised with 2017 figures.

Environmental Impact of Teleworking and Teleshopping

DEFF Research Database (Denmark)

Falch, Morten

This paper analyses the impact of two ICT applications on the total demand for transport (telework and teleshopping). These applications are selected as they were expected to be among the applications with the highest potential for savings in transport. The analysis indicates that the total impact...... is limited and might be even negative if rebound effects are included, and that the promotion of ICT applications must be accommodated by other measures before a noticeable positive impact on transport behaviour can be achieved....

Practitioners, professional cultures, and perceptions of impact assessment

International Nuclear Information System (INIS)

Morgan, Richard K.; Hart, Andrew; Freeman, Claire; Coutts, Brian; Colwill, David; Hughes, Andrew

2012-01-01

The very nature of impact assessment (IA) means that it often involves practitioners from a very wide range of disciplinary and professional backgrounds, which open the possibility that how IA is perceived and practised may vary according to the professional background of the practitioner. The purpose of this study is to investigate the extent to which a practitioner's professional background influences their perceptions of the adequacy of impact assessment in New Zealand under the Resource Management Act (RMA). Information gathered concerned professional affiliations, training, understanding of impact assessment practise, and perceptions of adequacy in relation to impact assessment. The results showed a dominance of a legalistic, operational perspective of impact assessment under the Resource Management Act, across all the main professions represented in the study. However, among preparers of impact assessments there was clear evidence of differences between the four main professional groups – surveyors, planners, engineers and natural scientists – in the way they see the nature and purpose of impact assessment, the practical steps involved, and what constitutes adequacy. Similarly, impact assessment reviewers – predominantly planners and lawyers – showed variations in their expectations of impact assessment depending on their respective professional affiliation. Although in many cases the differences seem to be more of a matter of emphasis, rather than major disputes on what constitutes a good process, even those differences can add up to rather distinct professional cultures of impact assessment. The following factors are seen as leading to the emergence of such professional cultures: different professions often contribute in different ways to an impact assessment, affecting their perception of the nature and purpose of the process; impact assessment training will usually be a secondary concern, compared with the core professional training, which will be

Uncovering the skewness news impact curve

Czech Academy of Sciences Publication Activity Database

Anatolyev, Stanislav; Petukhov, A.

2016-01-01

Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: RVO:67985998 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016

Perceived risk impacts from siting hazardous waste facilities

International Nuclear Information System (INIS)

Hemphill, R.C.; Edwards, B.K.; Bassett, G.W. Jr.

1992-01-01

This paper describes methods for evaluating perception-based economic impacts resulting from siting hazardous waste facilities. Socioeconomic impact analysis has devoted increasing attention to the potential implications of changed public perceptions of risk due to an activity or situation. This contrasts with traditional socioecconomic impact analysis, which has been limited to measuring direct and indirect consequences of activities, e.g., the employment effects of placing a military base in a specified location. Approaches to estimating economic impacts due to changes in public perceptions are ex ante or ex post. The former predict impacts prior to the construction and operation of a facility, while the later is based on impacts that become evident only when the facility is up and running. The theoretical foundations and practical requirements for demonstrating impacts, resulting from the siting of a hazardous facility are described. The theoretical rationale supporting the study of perceived risk research is presented along with discussion of problems that arise in demonstrating the existence and measuring the quantitative importance of economic impacts due to changes in perceived risk. The high-level nuclear waste facility being considered in Nevada is presented as an example in which there is potential for impacts, but where the link between perceived risk and economic conditions has not yet been developed

Perceived risk impacts from siting hazardous waste facilities

International Nuclear Information System (INIS)

Hemphill, R.C.; Edwards, B.K.; Bassett, G.W. Jr.

1992-01-01

This paper describes methods for evaluating perception-based economic impacts resulting from siting hazardous waste facilities. Socioeconomic impact analysis has devoted increasing attention to the potential implications of changed public perceptions of risk due to an activity or situation. This contrasts with traditional socioeconomic impact analysis, which has been limited to measuring direct and indirect consequences of activities, e.g., the employment effects of placing a military base in a specified location. Approaches to estimating economic impacts due to changes in public perceptions are ex ante or ex post. The former predict impacts prior to the construction and operation of a facility, while the later is based on impacts that become evident only when the facility is up and running. The theoretical foundations and practical requirements for demonstrating impacts resulting from the siting of a hazardous facility are described. The theoretical rationale supporting the study of perceived risk research is presented along with discussion of problems that arise in demonstrating the existence and measuring the quantitative importance of economic impacts due to changes in perceived risk. The high-level nuclear waste facility being considered in Nevada is presented as an example in which there is potential for impacts, but where the link between perceived risk and economic conditions has not yet been developed

Impact direction effect on serious-to-fatal injuries among drivers in near-side collisions according to impact location: focus on thoracic injuries.

Science.gov (United States)

Lai, Xinghua; Ma, Chunsheng; Hu, Jingwen; Zhou, Qing

2012-09-01

Occupant injury in real world vehicle accidents can be significantly affected by a set of crash characteristics, of which impact direction and impact location (or damage location) in general scale interval (e.g., frontal impact is frequently defined as general damage to vehicle frontal end with impact angle range of 11-1 o'clock) have been identified to associate with injury outcome. The effects of crash configuration in more specific scale of interval on the injury characteristics have not been adequately investigated. This paper presents a statistical analysis to investigate the combined effects of specific impact directions and impact locations on the serious-to-fatal injuries of driver occupants involved in near-side collisions using crash data from National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) for the calendar years of 1995-2005. The screened injury dataset is categorized by three impact locations (side front, side center and side distributed) and two impact directions (oblique impact at 10 o'clock and pure lateral impact at 9 o'clock), resulting in six crash configurations in total. The weighted counts and the risks of different types of injuries in each subgroup are calculated, with which the relative risks along with 95% confidence intervals under oblique impacts versus lateral impacts in each impact location category are computed. Accordingly, the most frequent injury patterns, the risks and the coded-sources of serious thoracic injuries in different crash configurations are identified. The approach adopted in the present study provides new perspectives into occupant injury outcomes and associated mechanism. Results of the analyses reveal the importance of consideration of the crash configurations beyond the scope of existing side-impact regulatory tests and stress the necessity of vehicle crashworthiness and restraint system design in omni-direction to better protect occupants in real-world crash scenarios. Copyright © 2012

Uncovering the skewness news impact curve

Czech Academy of Sciences Publication Activity Database

Anatolyev, Stanislav; Petukhov, A.

2016-01-01

Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: PRVOUK-P23 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016

Impact microcraters on an Australasian microtektite

Digital Repository Service at National Institute of Oceanography (India)

ShyamPrasad, M.; Sudhakar, M.

Microcraters attributable to impact have been discovered on an Australasian microtektite from a core in the Central Indian Basin. The craters resemble lunar microcraters and those generated during impact experiments. The largest crater here, which...

Consequences of Predicted or Actual Asteroid Impacts

Science.gov (United States)

Chapman, C. R.

2003-12-01

Earth impact by an asteroid could have enormous physical and environmental consequences. Impactors larger than 2 km diameter could be so destructive as to threaten civilization. Since such events greatly exceed any other natural or man-made catastrophe, much extrapolation is necessary just to understand environmental implications (e.g. sudden global cooling, tsunami magnitude, toxic effects). Responses of vital elements of the ecosystem (e.g. agriculture) and of human society to such an impact are conjectural. For instance, response to the Blackout of 2003 was restrained, but response to 9/11 terrorism was arguably exaggerated and dysfunctional; would society be fragile or robust in the face of global catastrophe? Even small impacts, or predictions of impacts (accurate or faulty), could generate disproportionate responses, especially if news media reports are hyped or inaccurate or if responsible entities (e.g. military organizations in regions of conflict) are inadequately aware of the phenomenology of small impacts. Asteroid impact is the one geophysical hazard of high potential consequence with which we, fortunately, have essentially no historical experience. It is thus important that decision makers familiarize themselves with the hazard and that society (perhaps using a formal procedure, like a National Academy of Sciences study) evaluate the priority of addressing the hazard by (a) further telescopic searches for dangerous but still-undiscovered asteroids and (b) development of mitigation strategies (including deflection of an oncoming asteroid and on- Earth civil defense). I exemplify these issues by discussing several representative cases that span the range of parameters. Many of the specific physical consequences of impact involve effects like those of other geophysical disasters (flood, fire, earthquake, etc.), but the psychological and sociological aspects of predicted and actual impacts are distinctive. Standard economic cost/benefit analyses may not

Health impact assessment of air pollution using a dynamic exposure profile: Implications for exposure and health impact estimates

Energy Technology Data Exchange (ETDEWEB)

Dhondt, Stijn, E-mail: stijn.dhondt@vub.ac.be [Department of Medical Sociology and Health Sciences, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090, Brussels (Belgium); Beckx, Carolien, E-mail: Carolien.Beckx@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Degraeuwe, Bart, E-mail: Bart.Degraeuwe@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Lefebvre, Wouter, E-mail: Wouter.Lefebvre@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Kochan, Bruno, E-mail: Bruno.Kochan@uhasselt.be [Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Bellemans, Tom, E-mail: Tom.Bellemans@uhasselt.be [Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Int Panis, Luc, E-mail: Luc.intpanis@vito.be [Flemish Institute for Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Transportation Research Institute, Hasselt University, Wetenschapspark 5 bus 6, 3590 Diepenbeek (Belgium); Macharis, Cathy, E-mail: cjmachar@vub.ac.be [Department MOSI-Transport and Logistics, Vrije Universiteit Brussel, Pleinlaan 2, B-1050, Brussels (Belgium); Putman, Koen, E-mail: kputman@vub.ac.be [Department of Medical Sociology and Health Sciences, Vrije Universiteit Brussel, Laarbeeklaan 103, B-1090, Brussels (Belgium); Interuniversity Centre for Health Economics Research (I-CHER), Vrije Universiteit Brussel, Brussels (Belgium)

2012-09-15

In both ambient air pollution epidemiology and health impact assessment an accurate assessment of the population exposure is crucial. Although considerable advances have been made in assessing human exposure outdoors, the assessments often do not consider the impact of individual travel behavior on such exposures. Population-based exposures to NO{sub 2} and O{sub 3} using only home addresses were compared with models that integrate all time-activity patterns-including time in commute-for Flanders and Brussels. The exposure estimates were used to estimate the air pollution impact on years of life lost due to respiratory mortality. Health impact of NO{sub 2} using an exposure that integrates time-activity information was on average 1.2% higher than when assuming that people are always at their home address. For ozone the overall estimated health impact was 0.8% lower. Local differences could be much larger, with estimates that differ up to 12% from the exposure using residential addresses only. Depending on age and gender, deviations from the population average were seen. Our results showed modest differences on a regional level. At the local level, however, time-activity patterns indicated larger differences in exposure and health impact estimates, mainly for people living in more rural areas. These results suggest that for local analyses the dynamic approach can contribute to an improved assessment of the health impact of various types of pollution and to the understanding of exposure differences between population groups. - Highlights: Black-Right-Pointing-Pointer Exposure to ambient air pollution was assessed integrating population mobility. Black-Right-Pointing-Pointer This dynamic exposure was integrated into a health impact assessment. Black-Right-Pointing-Pointer Differences between the dynamic and residential exposure were quantified. Black-Right-Pointing-Pointer Modest differences in health impact were found at a regional level. Black

Final Results of Shuttle MMOD Impact Database

Science.gov (United States)

Hyde, J. L.; Christiansen, E. L.; Lear, D. M.

2015-01-01

The Shuttle Hypervelocity Impact Database documents damage features on each Orbiter thought to be from micrometeoroids (MM) or orbital debris (OD). Data is divided into tables for crew module windows, payload bay door radiators and thermal protection systems along with other miscellaneous regions. The combined number of records in the database is nearly 3000. Each database record provides impact feature dimensions, location on the vehicle and relevant mission information. Additional detail on the type and size of particle that produced the damage site is provided when sampling data and definitive spectroscopic analysis results are available. Guidelines are described which were used in determining whether impact damage is from micrometeoroid or orbital debris impact based on the findings from scanning electron microscopy chemical analysis. Relationships assumed when converting from observed feature sizes in different shuttle materials to particle sizes will be presented. A small number of significant impacts on the windows, radiators and wing leading edge will be highlighted and discussed in detail, including the hypervelocity impact testing performed to estimate particle sizes that produced the damage.

Electron impact study of potassium hydroxide

International Nuclear Information System (INIS)

Vuskovic, L.; Trajmar, S.

1979-01-01

An ''elastic'' scattering study for low impact energies (5--20 ev) is reported for electron impact excitation of KOH. The ''elastic'' scattering is regarded as the sum of elastic rotational and vibrational contributions to the scattering

Iowa's renewable energy and infrastructure impacts

Science.gov (United States)

2010-04-01

Objectives : Estimate traffic growth and pavement deterioration due to Iowas growing renewable energy industries in a multi-county area. : Develop a traffic and fiscal impact model to help assess the impact of additional biofuels plants on...

Impact Management System

Data.gov (United States)

US Agency for International Development — IMS (developed w/Iraq mission) is a system for conducting quality portfolio impact analysis, linking projects to strategy through integration of context data. IMS...

Global Invader Impact Network (GIIN): toward standardized evaluation of the ecological impacts of invasive plants.

Science.gov (United States)

Barney, Jacob N; Tekiela, Daniel R; Barrios-Garcia, Maria Noelia; Dimarco, Romina D; Hufbauer, Ruth A; Leipzig-Scott, Peter; Nuñez, Martin A; Pauchard, Aníbal; Pyšek, Petr; Vítková, Michaela; Maxwell, Bruce D

2015-07-01

Terrestrial invasive plants are a global problem and are becoming ubiquitous components of most ecosystems. They are implicated in altering disturbance regimes, reducing biodiversity, and changing ecosystem function, sometimes in profound and irreversible ways. However, the ecological impacts of most invasive plants have not been studied experimentally, and most research to date focuses on few types of impacts, which can vary greatly among studies. Thus, our knowledge of existing ecological impacts ascribed to invasive plants is surprisingly limited in both breadth and depth. Our aim was to propose a standard methodology for quantifying baseline ecological impact that, in theory, is scalable to any terrestrial plant invader (e.g., annual grasses to trees) and any invaded system (e.g., grassland to forest). The Global Invader Impact Network (GIIN) is a coordinated distributed experiment composed of an observational and manipulative methodology. The protocol consists of a series of plots located in (1) an invaded area; (2) an adjacent removal treatment within the invaded area; and (3) a spatially separate uninvaded area thought to be similar to pre-invasion conditions of the invaded area. A standardized and inexpensive suite of community, soil, and ecosystem metrics are collected allowing broad comparisons among measurements, populations, and species. The method allows for one-time comparisons and for long-term monitoring enabling one to derive information about change due to invasion over time. Invader removal plots will also allow for quantification of legacy effects and their return rates, which will be monitored for several years. GIIN uses a nested hierarchical scale approach encompassing multiple sites, regions, and continents. Currently, GIIN has network members in six countries, with new members encouraged. To date, study species include representatives of annual and perennial grasses; annual and perennial forbs; shrubs; and trees. The goal of the GIIN

Influence of the Metal Volume Fraction on the maximum deflection and impact load of GLARE plates subjected to low velocity impact

Science.gov (United States)

Bikakis, GSE; Savaidis, A.; Zalimidis, P.; Tsitos, S.

2016-11-01

Fiber-metal laminates are hybrid composite materials, consisting of alternating metal layers bonded to fiber-reinforced prepreg layers. GLARE (GLAss REinforced) belongs to this new family of materials. GLARE is the most successful fiber-metal laminate up to now and is currently being used for the construction of primary aerospace structures, such as the fuselage of the Airbus A380 air plane. Impact properties are very important in aerospace structures, since impact damage is caused by various sources, such as maintenance damage from dropped tools, collision between service cars or cargo and the structure, bird strikes and hail. The principal objective of this article is to evaluate the influence of the Metal Volume Fraction (MVF) on the low velocity impact response of GLARE fiber-metal laminates. Previously published differential equations of motion are employed for this purpose. The low velocity impact behavior of various circular GLARE plates is predicted and characteristic values of impact variables, which represent the impact phenomenon, are evaluated versus the corresponding MVF of the examined GLARE material grades. The considered GLARE plates are subjected to low velocity impact under identical impact conditions. A strong effect of the MVF on the maximum impact load and a significant effect on the maximum plate deflection of GLARE plates has been found.

Environmental impacts and cost estimation for electricity production

International Nuclear Information System (INIS)

Devezeaux de Lavergne, J.G.

2000-01-01

This article reviews the different sources of energy used for electricity production in the view of the impact on environment. Coal, gas, wind energy, nuclear energy and hydro-energy are considered. The comparison of environmental performances requires common methodologies, 2 methodologies have been used ACV (analysis of a complete life cycle) and IPM (impact pathway methodology), both study all the exchanges of a system with the outside. The environmental performance is quantified by a series of parameters which represent the degradation of ecosystems. These parameters are divided into 4 groups: i) impact on public health, ii) impact on staff health, iii) impact on regional environment (agriculture, landscape alteration...) and iv) global impact on environment (greenhouse effect, acid rain, waste production, reduction of resources...). (A.C.)

Qualitative assessment of environmental impacts through fuzzy logic

International Nuclear Information System (INIS)

Peche G, Roberto

2008-01-01

The vagueness of many concepts usually utilized in environmental impact studies, along with frequent lack of quantitative information, suggests that fuzzy logic can be applied to carry out qualitative assessment of such impacts. This paper proposes a method for valuing environmental impacts caused by projects, based on fuzzy sets theory and methods of approximate reasoning. First, impacts must be described by a set of features. A linguistic variable is assigned to each feature, whose values are fuzzy sets. A fuzzy evaluation of environmental impacts is achieved using rule based fuzzy inference and the estimated fuzzy value of each feature. Generalized modus ponens has been the inference method. Finally, a crisp value of impact is attained by aggregation and defuzzification of all fuzzy results

Making Marine Noise Pollution Impacts Heard: The Case of Cetaceans in the North Sea within Life Cycle Impact Assessment

Directory of Open Access Journals (Sweden)

Heleen Middel

2017-06-01

Full Text Available Oceans represent more than 95% of the world’s biosphere and are among the richest sources of biodiversity on Earth. However, human activities such as shipping and construction of marine infrastructure pose a threat to the quality of marine ecosystems. Due to the dependence of most marine animals on sound for their communication, foraging, protection, and ultimately their survival, the effects of noise pollution from human activities are of growing concern. Life cycle assessment (LCA can play a role in the understanding of how potential environmental impacts are related to industrial processes. However, noise pollution impacts on marine ecosystems have not yet been taken into account. This paper presents a first approach for the integration of noise impacts on marine ecosystems into the LCA framework by developing characterization factors (CF for the North Sea. Noise pollution triggers a large variety of impact pathways, but as a starting point and proof-of-concept we assessed impacts on the avoidance behaviour of cetaceans due to pile-driving during the construction of offshore windfarms in the North Sea. Our approach regards the impact of avoidance behaviour as a temporary loss of habitat, and assumes a temporary loss of all individuals within that habitat from the total regional population. This was verified with an existing model that assessed the population-level effect of noise pollution on harbour porpoises (Phocoena phocoena in the North Sea. We expanded our CF to also include other cetacean species and tested it in a case study of the construction of an offshore windfarm (Prinses Amalia wind park. The total impact of noise pollution was in the same order of magnitude as impacts on other ecosystems from freshwater eutrophication, freshwater ecotoxicity, terrestrial acidification, and terrestrial ecotoxicity. Although there are still many improvements to be made to this approach, it provides a basis for the implementation of noise

Simple Way of Generating Oblique Impact

Czech Academy of Sciences Publication Activity Database

Trnka, Jan; Dvořáková, Pavla; Veselý, Eduard

2007-01-01

Roč. 31, č. 2 (2007), s. 28-32 ISSN 0732-8818 Institutional research plan: CEZ:AV0Z20760514 Keywords : oblique impact * exploding wire * holography Subject RIV: JR - Other Machinery Impact factor: 0.400, year: 2007

[Sequence orthodontic treatment of impacted dilacerated maxillary central incisors].

Science.gov (United States)

Zheng, Yi; Pang, Xuannai; Nan, Lan; Mo, Shuixue

2012-06-01

To explore an effective orthodontic method for treating impacted dilacerated maxillary central incisors. 12 impacted teeth of 11 cases were chosen. The position of the impacted teeth and the relations with neighbour tissues were assessed by X-ray images, oral examination and plaster model, etc. The impacted teeth were induced to erupt with the closed-eruption technique and fixed orthodontic appliances, root canal therapy, apicoectomy and prosthetic treatment. 12 impacted teeth were moved into arches, and the occlusal relationship was normal. There were no root resorption or conglutination in those impacted teeth. The labial impacted teeth of nine cases had bigger labial crown torsion. The root apexes of four impacted teeth were palpable under mucosa of the labial sulcus and operated by root canal therapy and apicoectomy. One of them received prosthetic treatment. Others (five cases) hadn't accepted root canal therapy, and were observed temporarily. The effects of two palatal impacted teeth was stable. It was a good method to expand indication with sequence orthodontic treatment. The impacted dilacerated maxillary central incisors could be aligned with good esthetical and functional effect.

Impact of modern agriculture on environment-3

International Nuclear Information System (INIS)

Arora, S.K.; Behl, R.K.; Tauro, P.; Joshi, U.N.

1995-11-01

The present volume titled Impact of Modern Agriculture on Environment is the outcome of the Proceedings of the Indo-German Conference on Impact of Modern Agriculture on Environment, a seminar organized by Haryana Agricultural University in 1993 and deals with certain areas of the environmental aspects of agriculture including its radiological impacts. Paper relevant to INIS is indexed separately

Impact assessment of ionising radiation in wildlife

International Nuclear Information System (INIS)

2001-01-01

This R and D project was commissioned by the Environment Agency and English Nature in January 2001 to provide up-to-date information on ionising radiation impact to wildlife, upon which a robust assessment approach may be developed. The methodology will provide an interim approach, whilst awaiting the outcome of the European Commission funded project 'Framework for Assessment of Environmental Impact' (FASSET) due to end in October 2003. The aims of the report were: to summarise the latest research on the behaviour, transfer and impact of ionising radiation effects on wildlife; to outline and review relevant European Directives which have impacted on the requirements to assess the impact to wildlife from ionising radiation in the UK; to consider the role of regulatory bodies in assessing the impact of ionising radiation on wildlife with respect to England and Wales; to make recommendations on the relative biological effectiveness of different types of radiation with respect to wildlife; and to recommend an approach with which to assess the 'scale of risk' to wildlife from the effects of ionising radiation, with spreadsheets to support the methodology. The report describes the behaviour and transfer of radionuclides in a number of different ecosystem types. Particular emphasis is placed on those ecosystems most likely to be impacted by the authorised discharges of radioactivity within the UK. As there is no international consensus on the approach to be taken to assess the impact of ionising radiation on wildlife, some countries have adopted their own legislation. The report evaluates these regulatory frameworks and describe the current UK position

Assessing the impact of aviation on climate

Directory of Open Access Journals (Sweden)

Karen Marais

2008-04-01

Full Text Available We present an assessment of the marginal climate impacts of new aviation activities. We use impulse response functions derived from carbon-cycle and atmospheric models to estimate changes in surface temperature for various aviation impacts (CO2, NOx on methane, NOx on ozone, sulfates, soot, and contrails/induced cirrus. We use different damage functions and discount rates to explore health, welfare and ecological costs for a range of assumptions and scenarios. Since uncertainty is high regarding many aviation effects, we explicitly capture some uncertainty by representing several model parameters as probabilistic distributions. The uncertainties are then propagated using Monte Carlo analysis to derive estimates for the impact of these uncertainties on the marginal future climate impacts. Our goal is to provide a framework that will communicate the potential impacts of aviation on climate change under different scenarios and assumptions, and that will allow decision-makers to compare these potential impacts to other aviation environmental impacts. We present results to describe the influence of parametric uncertainties, scenarios, and assumptions for valuation on the expected marginal future costs of aviation impacts. Estimates of the change in global average surface temperature due to aviation are most sensitive to changes in climate sensitivity, the radiative forcing attributed to short-lived effects (in particular those related to contrails and aviation-induced cirrus, and the choice of emissions scenario. Estimates of marginal future costs of aviation are most sensitive to assumptions regarding the discount rate, followed by assumptions regarding climate sensitivity, and the choice of emissions scenario.

Fukushima accident - reasons and impacts

International Nuclear Information System (INIS)

Slugen, V.

2011-01-01

The Fukushima accident influenced dramatically the current view on safety of nuclear facilities. Consideration about possible impacts of natural catastrophe in design of nuclear facilities seems to be much more important than before. European commission is focused on the stress-tests at nuclear power plants. His paper will go more in details having in mind reasons and impacts of Fukushima accident (Author)

Air pollution: impact and prevention.

Science.gov (United States)

Sierra-Vargas, Martha Patricia; Teran, Luis M

2012-10-01

Air pollution is becoming a major health problem that affects millions of people worldwide. In support of this observation, the World Health Organization estimates that every year, 2.4 million people die because of the effects of air pollution on health. Mitigation strategies such as changes in diesel engine technology could result in fewer premature mortalities, as suggested by the US Environmental Protection Agency. This review: (i) discusses the impact of air pollution on respiratory disease; (ii) provides evidence that reducing air pollution may have a positive impact on the prevention of disease; and (iii) demonstrates the impact concerted polices may have on population health when governments take actions to reduce air pollution. © 2012 The Authors. Respirology © 2012 Asian Pacific Society of Respirology.

Impact mechanics of the Cretaceous-Tertiary extinction bolide

Science.gov (United States)

Okeefe, J. D.; Ahrens, T. J.

1982-01-01

An examination of the mechanics of asteroidal, cometary, and meteor swarm impact on the earth determined if the enrichment of projectile material in the K-T layer is consistent with melts and impact breccias on the earth and moon, the size of the impacters, the distribution of the kinetic energy, and the sequence of impacts that could give rise to observed extinction phenomena. Flows resulting from spherical projectile impacts onto layers of air, water, and silicates were modeled and Eulerian finite difference algorithms were employed to solve conservation equations and equations of state. A range of speeds and impacter densities were considered, along with sizes from 0.17 km, which would be consumed in the atmosphere, to a 10 km object, which would have had a diameter greater than a reference 7.1 km atmosphere depth. It is concluded that an impact of the K-T bolide could result in global biotic extinction and worldwide material deposition.

Climate change - the impacts

International Nuclear Information System (INIS)

Reysset, Bertrand; Billes-Garabedian, Laurent; Henique, Julien; Pascal, Mathilde; Pirard, Philippe; Motreff, Yvon; Barbault, Robert; Weber, Jacques; Gate, Philippe; Salagnac, Jean-Luc; Desplat, Julien; Kounkou-Arnaud, Raphaelle

2012-01-01

This special dossier about the impacts of climate change is made of 6 contributions dealing with: the mitigation of climate effects and how to deal with them (Bertrand Reysset); how to dare and transmit (Laurent Billes-Garabedian); littoral risks, the Pas-de-Calais example (Julien Henique); extreme meteorological events and health impacts (Mathilde Pascal, Philippe Pirard, Yvon Motreff); Biodiversity and climate: the janus of global change (Robert Barbault, Jacques Weber); adapting agriculture to dryness and temperatures (Philippe Gate); Paris and the future heats of the year 2100 (Jean-Luc Salagnac, Julien Desplat, Raphaelle Kounkou-Arnaud)

40 CFR 227.4 - Criteria for evaluating environmental impact.

Science.gov (United States)

2010-07-01

... impact. 227.4 Section 227.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN... Impact § 227.4 Criteria for evaluating environmental impact. This subpart B sets specific environmental... of direct environmental impact. ...

Impact assessment: Eroding benefits through streamlining?

Energy Technology Data Exchange (ETDEWEB)

Bond, Alan, E-mail: alan.bond@uea.ac.uk [School of Environmental Sciences, University of East Anglia (United Kingdom); School of Geo and Spatial Sciences, North-West University (South Africa); Pope, Jenny, E-mail: jenny@integral-sustainability.net [Integral Sustainability (Australia); Curtin University Sustainability Policy Institute (Australia); Morrison-Saunders, Angus, E-mail: A.Morrison-Saunders@murdoch.edu.au [School of Geo and Spatial Sciences, North-West University (South Africa); Environmental Science, Murdoch University (Australia); Retief, Francois, E-mail: francois.retief@nwu.ac.za [School of Geo and Spatial Sciences, North-West University (South Africa); Gunn, Jill A.E., E-mail: jill.gunn@usask.ca [Department of Geography and Planning and School of Environment and Sustainability, University of Saskatchewan (Canada)

2014-02-15

This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment.

Impact assessment: Eroding benefits through streamlining?

International Nuclear Information System (INIS)

Bond, Alan; Pope, Jenny; Morrison-Saunders, Angus; Retief, Francois; Gunn, Jill A.E.

2014-01-01

This paper argues that Governments have sought to streamline impact assessment in recent years (defined as the last five years) to counter concerns over the costs and potential for delays to economic development. We hypothesise that this has had some adverse consequences on the benefits that subsequently accrue from the assessments. This hypothesis is tested using a framework developed from arguments for the benefits brought by Environmental Impact Assessment made in 1982 in the face of the UK Government opposition to its implementation in a time of economic recession. The particular benefits investigated are ‘consistency and fairness’, ‘early warning’, ‘environment and development’, and ‘public involvement’. Canada, South Africa, the United Kingdom and Western Australia are the jurisdictions tested using this framework. The conclusions indicate that significant streamlining has been undertaken which has had direct adverse effects on some of the benefits that impact assessment should deliver, particularly in Canada and the UK. The research has not examined whether streamlining has had implications for the effectiveness of impact assessment, but the causal link between streamlining and benefits does sound warning bells that merit further investigation. -- Highlights: • Investigation of the extent to which government has streamlined IA. • Evaluation framework was developed based on benefits of impact assessment. • Canada, South Africa, the United Kingdom, and Western Australia were examined. • Trajectory in last five years is attrition of benefits of impact assessment

Lateral impact on pressurized glass/epoxy pipes

Energy Technology Data Exchange (ETDEWEB)

Santiago, Rafael C.; Alves, Marcilio [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica], e-mail: rafael.santiago@poli.usp.br, e-mail: maralves@usp.br

2009-07-01

This work studies the impact of a drop mass against glass/epoxy composite pipes. The experimental tests comprises an impact hammer and the set-up is such that a drop mass falls transversally to the main length of the tube. The impact response is measured with a non-contact laser system and reveals some issues explored here in a numerical model. Inner pressure was applied to the tube in order to access its influence on failure. It has been found that the numerical model represents well the structural collapse of a pressurized pipe under a lateral impact. (author)

Alpha Fuels Environmental Test Facility impact gun

International Nuclear Information System (INIS)

Anderson, C.G.

1978-01-01

The Alpha Fuels Environmental Test Facility (AFETF) impact gun is a unique tool for impact testing 238 PuO 2 -fueled heat sources of up to 178-mm dia at velocities to 300 m/s. An environmentally-sealed vacuum chamber at the muzzle of the gun allows preheating of the projectile to 1,000 0 C. Immediately prior to impact, the heat source projectile is completely sealed in a vacuum-tight catching container to prevent escape of its radioactive contents should rupture occur. The impact velocity delivered by this gas-powered gun can be regulated to within +-2%

A new approach for environmental justice impact assessment

International Nuclear Information System (INIS)

Wilkinson, C.H.; Brumburgh, G.P.; Edmunds, T.A.; Kay, D.

1996-03-01

President Clinton's Executive Order 12898 calls for examination of disproportionately high and adverse impacts to minority and low-income communities. In addition to demographic mapping, environmental justice analyses should also include quantitative impact assessment to show presence or absence of disproportionate impacts. This study demonstrates use of a geographic information system (GIS) and a computer model. For this demonstration, a safety analysis report and a computer code were used to develop impact assessment data from a hypothetical facility accident producing a radiological airborne plume. The computer code modeled the plume, plotted dose contours, and provided latitude and longitude coordinates for transfer to the GIS. The GIS integrated and mapped the impact and demographic data toprovide a graphical representation of the plume with respect to the population. Impacts were then analyzed. The GIS was used to estimate the total dose to the exposed population under the plume, the dose to the low-income population under the plume, and the dose to the minority population under the plume. Impacts among the population groups were compared to determine whether a dispropotionate share of the impacts were borne by minority or low-income populations

Anaesthetic gases: environmental impact and alternatives

African Journals Online (AJOL)

Little consideration has been given to the environmental impact of anaesthetic gas .... our practice to select gases with a lower environmental impact is also ... is used as raw material for new anaesthetics. ... none in the pipeline.1. Conclusion.

The ecological impacts of marine debris

NARCIS (Netherlands)

Rochman, Chelsea M.; Browne, Mark Anthony; Underwood, A.J.; Franeker, Van Jan A.; Thompson, Richard C.; Amaral-Zettler, Linda A.

2016-01-01

Anthropogenic debris contaminates marine habitats globally, leading to several perceived ecological impacts. Here, we critically and systematically review the literature regarding impacts of debris from several scientific fields to understand the weight of evidence regarding the ecological

Drop impact splashing and air entrapment

KAUST Repository

Thoraval, Marie-Jean

2013-03-01

Drop impact is a canonical problem in fluid mechanics, with numerous applications in industrial as well as natural phenomena. The extremely simple initial configuration of the experiment can produce a very large variety of fast and complex dynamics. Scientific progress was made in parallel with major improvements in imaging and computational technologies. Most recently, high-speed imaging video cameras have opened the exploration of new phenomena occurring at the micro-second scale, and parallel computing allowed realistic direct numerical simulations of drop impacts. We combine these tools to bring a new understanding of two fundamental aspects of drop impacts: splashing and air entrapment. The early dynamics of a drop impacting on a liquid pool at high velocity produces an ejecta sheet, emerging horizontally in the neck between the drop and the pool. We show how the interaction of this thin liquid sheet with the air, the drop or the pool, can produce micro-droplets and bubble rings. Then we detail how the breakup of the air film stretched between the drop and the pool for lower impact velocities can produce a myriad of micro-bubbles.

Environmental impacts of renewable energy sources

International Nuclear Information System (INIS)

Abbasi, S.A.; Abbasi, N.

1997-01-01

The global attention has always been focused on the adverse environmental impacts of conventional energy sources. In contrast nonconventional energy sources, particularly the renewable ones, have enjoyed a clean image vis a vis environmental impacts. The only major exception to this general trend has been large hydropower projects; experience has taught that they can be disastrous for the environment. The belief now is that mini hydro and microhydro projects are harmless alternatives. But are renewable energy sources really as benign as is widely believed? The present essay addresses this question in the background of Lovin's classical paradigm which had postulated the hard (malignant) and soft (benign) energy concepts in the first place. It then critically evaluates the environmental impacts of major renewable energy sources. It then comes up with the broad conclusion that renewable energy sources are not the panacea they are popularly perceived to be; indeed in some cases their adverse environmental impacts can be as strongly negative as the impacts of conventional energy sources. The paper also dwells on the steps needed to utilize renewable energy sources without facing environmental backlashes of the type experienced from hydropower projects

Dynamic tests on metallic impact limiters

International Nuclear Information System (INIS)

Sagartz, M.J.

1978-01-01

Three different types of metallic impact limiters were tested; plain fins, laterally stiffened fins and tubes whose axes were aligned with the direction of impact. All specimens were made of 304 stainless steel and were annealed before testing. A heavy steel drop table of variable mass and moving at about 13.4 m/s (44 ft/s) was used to impact the specimens which were mounted on a stationary base. Impact velocity, drop table acceleration vs. time and force vs. time were measured on each test and were used to calculate the energy absorbed by the impact limiters. Results showed that the peak stress that a plain fin can transmit to the cask body can be several times the static yield stress of the fin. Also as buckling proceeds the load in a plain fin drops significantly and the rate at which it absorbs energy falls off dramatically, making the fin a rather inefficient energy absorber overall. The laterally stiffened fin and the cylinders did not exhibit this rapid decrease in load-carrying capacity with deformation and hence were able to absorb relatively more energy per unit volume of material

Climate change impacts: an Ontario perspective

International Nuclear Information System (INIS)

Mortsch, L.

1995-11-01

Significant changes in the climate system which are likely to affect biophysical, social and economic systems in various ways, were discussed. Trends in greenhouse gas levels show that during the 20. century, human activity has changed the make-up of the atmosphere and its greenhouse effect properties. A pilot study on the impacts of climate change identified changes in the water regime such as declines in net basin supply, lake levels and outflows, as important concerns. These changes would have impacts on water quality, wetlands, municipal water supply, hydroelectric power generation, commercial shipping, tourism and recreation, and to a lesser extent, on food productions. Climate impact assessments suggest that world conditions will change significantly as a result. Those with less resources are likely to be most affected by climate change, and the impacts on other regions of the world will be more significant to Ontario than the direct impacts on Ontario itself. In an effort to keep pace with global changes, Ontario will have to limit emissions, conduct research in innovative technology and develop greater awareness of the risk of climate change. refs., tabs., figs

Impacts of Canada's uranium mining industry

International Nuclear Information System (INIS)

Holman, G.J.

1982-05-01

This study examines economic and environmental impacts of uranium mining in Canada and compares these impacts with those of other extractive and energy industries. The uranium industry generates taxes and royalties, income, employment, foreign exchange earnings, security of energy supply, and technological spinoffs. The indirect impacts of the industry as measured by employment and income multipliers are lower than those for other types of mining and comparable to oil and gas because of the high proportion of costs withdrawn from the economy in the form of taxes and operator margin. Social costs are primarily occupational hazards. Uranium mining probably has a lower non-health environmental impact than other mining industries due to much smaller throughputs and transportation requirements. Residents of the area surrounding the mine bear a disproportionate share of the social costs, while non-residents receive most of the benefits

PMHS impact response in 3 m/s and 8 m/s nearside impacts with abdomen offset.

Science.gov (United States)

Miller, Carl S; Madura, Nathaniel H; Schneider, Lawrence W; Klinich, Kathleen D; Reed, Matthew P; Rupp, Jonathan D

2013-11-01

Lateral impact tests were performed using seven male post-mortem human subjects (PMHS) to characterize the force-deflection response of contacted body regions, including the lower abdomen. All tests were performed using a dual-sled, side-impact test facility. A segmented impactor was mounted on a sled that was pneumatically accelerated into a second, initially stationary sled on which a subject was seated facing perpendicular to the direction of impact. Positions of impactor segments were adjusted for each subject so that forces applied to different anatomic regions, including thorax, abdomen, greater trochanter, iliac wing, and thigh, could be independently measured on each PMHS. The impactor contact surfaces were located in the same vertical plane, except that the abdomen plate was offset 5.1 cm towards the subject. The masses of the sleds and the force- deflection characteristics of the energy-absorbing interface material between the sleds were set to provide the impactor sled with a velocity profile that matched the average driver door velocity history produced in a series of side NCAP tests. Impactor padding was also selected so that average ATD pelvis and thorax responses from the same series of side NCAP tests were reproduced when the ATD used in these tests was impacted using the average door-velocity history. Each subject was first impacted on one side of the body using an initial impactor speed of 3 m/s. If a post-test CT scan and strain-gage data revealed two or fewer non-displaced rib fractures, then the PMHS was impacted on the contralateral side of the body at a speed of 8 m/s or 10 m/s. The results of tests in the 3 m/s and 8 m/s conditions were used to develop force-deflection response corridors for the abdomen, force history response corridors for the pelvis (iliac wing and greater trochanter), the midthigh, and the thorax. Response corridors for the lateral acceleration of the pelvis were also developed. Future work will compare side impact ATD

Regional economic impact of oil spills

International Nuclear Information System (INIS)

Heen, K.; Andersen, M.

1994-01-01

An approach is demonstrated of coupling an environmental model to input-output analysis which aims to quantify the regional economic impact of an environmental accident. The model is implemented with the data of a potential oil spill interacting with the salmon aquaculture industry in Northern Norway. The production loss in salmon aquaculture and the regional income impact is computed and discussed. The approach used in this article could be a model for estimating the regional socio-economic impact of environmental factors like water and air pollution. 1 fig., 4 tabs., 19 refs

BIOGAS STATIONS AND THEIR ENVIRONMENTAL IMPACTS

Directory of Open Access Journals (Sweden)

Vladimir Lapčik

2011-12-01

Full Text Available The article summarizes the authors’ experience with environmental impact assessment in branch of biogas plants. The introductory part of the paper describes legislative obligations of the Czech Republic concerning the fulfilment of the European Union’s limits as for utilization of renewable energy resources. The next parts of the paper deal with an impact analysis of biogas plants on the environment. The final part of the paper deals with experience with implementation of the environmental impact assessment process in the field of biogas plants in the Czech Republic.

A general theory of impacts and mass extinctions, and the consequences of large-body impact on the Earth

Science.gov (United States)

Rampino, M. R.

1994-01-01

The theory that large-body impacts are the primary cause of mass extinctions of life on the Earth now has a sound theoretical and observational foundation. A convergence of evidence suggests that the biosphere may be a sensitive detector of large impact events, which result in the recorded global mass extinction pulses. The astronomically observed flux of asteroids and comets in the neighborhood of the Earth, and the threshold impact size calculated to produce a global environment catastrophe, can be used to predict a time history of large impact events and related mass extinctions of life that agrees well with the record of approx. 24 extinction events in the last 540 m.y.

Economic impact of GM crops

Science.gov (United States)

Brookes, Graham; Barfoot, Peter

2014-01-01

A key part of any assessment of the global value of crop biotechnology in agriculture is an examination of its economic impact at the farm level. This paper follows earlier annual studies which examined economic impacts on yields, key costs of production, direct farm income and effects, and impacts on the production base of the four main crops of soybeans, corn, cotton and canola. The commercialization of genetically modified (GM) crops has continued to occur at a rapid rate, with important changes in both the overall level of adoption and impact occurring in 2012. This annual updated analysis shows that there have been very significant net economic benefits at the farm level amounting to $18.8 billion in 2012 and $116.6 billion for the 17-year period (in nominal terms). These economic gains have been divided roughly 50% each to farmers in developed and developing countries. GM technology have also made important contributions to increasing global production levels of the four main crops, having added 122 million tonnes and 230 million tonnes respectively, to the global production of soybeans and maize since the introduction of the technology in the mid-1990s. PMID:24637520

Pipe-to-pipe impact tests

Energy Technology Data Exchange (ETDEWEB)

Bampton, M C.C.; Alzheimer, J M; Friley, J R; Simonen, F A

1985-11-01

Existing licensing criteria express what damage shall be assumed for various pipe sizes as a consequence of a postulated break in a high energy system. The criteria are contained in Section 3.6.2 of the Standard Review Plan, and the purpose of the program described with this paper is to evaluate the impact criteria by means of a combined experimental and analytical approach. A series of tests has been completed. Evaluation of the test showed a deficiency in the range of test parameters. These deficiencies are being remedied by a second series of tests and a more powerful impact machine. A parallel analysis capability has been developed. This capability has been used to predict the damage for the first test series. The quality of predictions has been improved by tests that establish post-crush and bending relationships. Two outputs are expected from this project: data that may, or may not, necessitate changes to the criteria after appropriate value impact evaluations and an analytic capability for rapidly evaluating the potential for pipe whip damage after a postulated break. These outputs are to be contained in a value-impact document and a program final report. (orig.).

Socio-economic expenditure impacts report

International Nuclear Information System (INIS)

2004-01-01

The direct and indirect employment and employment income that can result from lifting the moratorium on British Columbia's west coast were estimated. Jobs and income are the two socio-economic benefits that generate the most concern at the local, provincial and national levels. The estimates are based on the development scenarios of one natural gas project in the Hecate Strait, and one oil project in the Queen Charlotte Sound. It was noted that a significant component of the potential socio-economic benefits from offshore development in British Columbia will result from project investment expenditures. Statistics Canada's Input-Output Model was used to assess the total expenditure impacts at the national and provincial levels. The indirect impacts are relatively more important to the local economy because they deal mainly with accommodation, food, beverage, and transportation. The total impacts can be measured in terms of total revenues, gross domestic product, and wages and salaries. The nature of supplier services that may be required were also identified. It was estimated that with the combined impacts of construction and operations, the total Canadian gross domestic product will increase by $3.0 billion, most of which will accrue to British Columbia. refs., tabs., figs

Drop impact entrapment of bubble rings

KAUST Repository

Thoraval, M.-J.; Takehara, K.; Etoh, T.G.; Thoroddsen, Sigurdur T

2013-01-01

We use ultra-high-speed video imaging to look at the initial contact of a drop impacting on a liquid layer. We observe experimentally the vortex street and the bubble-ring entrapments predicted numerically, for high impact velocities, by Thoraval et

Global Invader Impact Network (GIIN): toward standardized evaluation of the ecological impacts of invasive plants

Czech Academy of Sciences Publication Activity Database

Barney, J. N.; Tekiela, D. R.; Barrios-Garcia, M. N.; Dimarco, R. D.; Hufbauer, R. A.; Leipzig-Scott, P.; Nunez, M. A.; Pauchard, A.; Pyšek, Petr; Vítková, Michaela; Maxwell, B. D.

2015-01-01

Roč. 5, č. 14 (2015), s. 2878-2889 ISSN 2045-7758 R&D Projects: GA ČR(CZ) GAP505/11/1112 Grant - others:AV ČR(CZ) AP1002 Program:Akademická prémie - Praemium Academiae Institutional support: RVO:67985939 Keywords : invasive plants * coordinated distributed experiment * impact assessment Subject RIV: EH - Ecology, Behaviour Impact factor: 2.537, year: 2015

Pseudogymnoascus destructans: evidence of virulent skin invasion for bats under natural conditions, Europe.

Science.gov (United States)

Bandouchova, H; Bartonicka, T; Berkova, H; Brichta, J; Cerny, J; Kovacova, V; Kolarik, M; Köllner, B; Kulich, P; Martínková, N; Rehak, Z; Turner, G G; Zukal, J; Pikula, J

2015-02-01

While Pseudogymnoascus destructans has been responsible for mass bat mortalities from white-nose syndrome (WNS) in North America, its virulence in Europe has been questioned. To shed the light on the issue of host-pathogen interaction between European bats and P. destructans, we examined seventeen bats emerging from the fungus-positive underground hibernacula in the Czech Republic during early spring 2013. Dual wing-membrane biopsies were taken from Barbastella barbastellus (1), Myotis daubentonii (1), Myotis emarginatus (1), Myotis myotis (11), Myotis nattereri (1) and Plecotus auritus (2) for standard histopathology and transmission electron microscopy. Non-lethal collection of suspected WNS lesions was guided by trans-illumination of the wing membranes with ultraviolet light. All bats selected for the present study were PCR-positive for P. destructans and showed microscopic findings consistent with the histopathological criteria for WNS diagnosis. Ultramicroscopy revealed oedema of the connective tissue and derangement of the fibroblasts and elastic fibres associated with skin invasion by P. destructans. Extensive fungal infection induced a marked inflammatory infiltration by neutrophils at the interface between the damaged part of the wing membrane replaced by the fungus and membrane tissue not yet invaded by the pathogen. There was no sign of keratinolytic activity in the stratum corneum. Here, we show that lesions pathognomonic for WNS are common in European bats and may also include overwhelming full-thickness fungal growth through the wing membrane equal in severity to reports from North America. Inter-continental differences in the outcome of WNS in bats in terms of morbidity/mortality may therefore not be due to differences in the pathogen itself. © 2014 Blackwell Verlag GmbH.

Environmental impacts of energy utilization

International Nuclear Information System (INIS)

Prado, C.P.C. do; Orsini, C.M.Q.; Rodrigues, D.; Barolli, E.; Nogueira, F.R.; Bosco, F.A.R.; Tabacniks, M.H.; Artaxo Netto, P.E.

1981-04-01

A survey is done of the available data on the physical environmental impacts in Brazil, derived from energetic systems such as: petroleum, hydroelectricity, firewood, coal, ethanol, methanol and hydrogen. A critical evalution of these data is done with respect to the preservation of the environment. The necessity of studying the environmental impact of the utilization of ethanol, nuclear fuels and coal is stressed. (M.A.) [pt

Development of impact design methods for ceramic gas turbine components

Science.gov (United States)

Song, J.; Cuccio, J.; Kington, H.

1990-01-01

Impact damage prediction methods are being developed to aid in the design of ceramic gas turbine engine components with improved impact resistance. Two impact damage modes were characterized: local, near the impact site, and structural, usually fast fracture away from the impact site. Local damage to Si3N4 impacted by Si3N4 spherical projectiles consists of ring and/or radial cracks around the impact point. In a mechanistic model being developed, impact damage is characterized as microcrack nucleation and propagation. The extent of damage is measured as volume fraction of microcracks. Model capability is demonstrated by simulating late impact tests. Structural failure is caused by tensile stress during impact exceeding material strength. The EPIC3 code was successfully used to predict blade structural failures in different size particle impacts on radial and axial blades.

A qualitative method proposal to improve environmental impact assessment

International Nuclear Information System (INIS)

Toro, Javier; Requena, Ignacio; Duarte, Oscar; Zamorano, Montserrat

2013-01-01

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown

A qualitative method proposal to improve environmental impact assessment

Energy Technology Data Exchange (ETDEWEB)

Toro, Javier, E-mail: jjtoroca@unal.edu.co [Institute of Environmental Studies, National University of Colombia at Bogotá (Colombia); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Duarte, Oscar, E-mail: ogduartev@unal.edu.co [National University of Colombia at Bogotá, Department of Electrical Engineering and Electronics (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

2013-11-15

In environmental impact assessment, qualitative methods are used because they are versatile and easy to apply. This methodology is based on the evaluation of the strength of the impact by grading a series of qualitative attributes that can be manipulated by the evaluator. The results thus obtained are not objective, and all too often impacts are eliminated that should be mitigated with corrective measures. However, qualitative methodology can be improved if the calculation of Impact Importance is based on the characteristics of environmental factors and project activities instead on indicators assessed by evaluators. In this sense, this paper proposes the inclusion of the vulnerability of environmental factors and the potential environmental impact of project activities. For this purpose, the study described in this paper defined Total Impact Importance and specified a quantification procedure. The results obtained in the case study of oil drilling in Colombia reflect greater objectivity in the evaluation of impacts as well as a positive correlation between impact values, the environmental characteristics at and near the project location, and the technical characteristics of project activities. -- Highlights: • Concept of vulnerability has been used to calculate the importance impact assessment. • This paper defined Total Impact Importance and specified a quantification procedure. • The method includes the characteristics of environmental and project activities. • The application has shown greater objectivity in the evaluation of impacts. • Better correlation between impact values, environment and the project has been shown.

Sierra Pacific Power Company Alturas Transmission Line Project, Final Environmental Impact Report/Environmental Impact Statement. Volume 3: Appendices

International Nuclear Information System (INIS)

1995-11-01

Sierra Pacific Power Company has proposed the construction and operation of a 345,000 volt overhead electric power transmission line from Alturas, California to Reno, Nevada. This Environmental Impact Report/Environmental Impact Statement will assess the potential environmental impacts of the proposed project and alternatives. This report contains Appendices A--I which contain the following: glossary/abbreviations; scoping report; structure coordinate summary; air quality; biological resources; geology; noise; visual contrast rating forms; and cultural resources

Lõigutud aeg - "Impact 5" / Vappu Thurlow, Loit Jõekalda

Index Scriptorium Estoniae

Thurlow, Vappu, 1960-

2006-01-01

17.-21. 10. 2007 toimub Kumu Kunstimuuseumis rahvusvaheline graafikakonverents "Impact 5". Teema "Slices of Time / Lõigutud aeg" on tuletatud Henri Bergsoni filosoofiast. 4. XII toimus Adamson-Ericu muuseumis "Impact'i"-teemaline seminar. "Impact 5" logokonkursi võitis Heino Prunsvelt, II - Aapo Pukk. Kuraatorid tutvustavad küsimusi, mis võiksid olla mõtlemisaineks seoses "Impact'i" ja praeguse olukorraga ning tutvustavad lühidalt Henri Bergsoni filosoofilisi vaateid

Structural impact detection with vibro-haptic interfaces

Science.gov (United States)

Jung, Hwee-Kwon; Park, Gyuhae; Todd, Michael D.

2016-07-01

This paper presents a new sensing paradigm for structural impact detection using vibro-haptic interfaces. The goal of this study is to allow humans to ‘feel’ structural responses (impact, shape changes, and damage) and eventually determine health conditions of a structure. The target applications for this study are aerospace structures, in particular, airplane wings. Both hardware and software components are developed to realize the vibro-haptic-based impact detection system. First, L-shape piezoelectric sensor arrays are deployed to measure the acoustic emission data generated by impacts on a wing. Unique haptic signals are then generated by processing the measured acoustic emission data. These haptic signals are wirelessly transmitted to human arms, and with vibro-haptic interface, human pilots could identify impact location, intensity and possibility of subsequent damage initiation. With the haptic interface, the experimental results demonstrate that human could correctly identify such events, while reducing false indications on structural conditions by capitalizing on human’s classification capability. Several important aspects of this study, including development of haptic interfaces, design of optimal human training strategies, and extension of the haptic capability into structural impact detection are summarized in this paper.

The regional environmental impact of biomass production

International Nuclear Information System (INIS)

Graham, R.L.

1994-01-01

The objective of this paper is to present a broad overview of the potential environmental impacts of biomass energy from energy crops. The subject is complex because the environmental impact of using biomass for energy must be considered in the context of alternative energy options while the environmental impact of producing biomass from energy crops must be considered in the context of the alternative land-uses. Using biomass-derived energy can reduce greenhouse gas emissions or increase them; growing biomass energy crops can enhance soil fertility or degrade it. Without knowing the context of the biomass energy, one can say little about its specific environmental impacts. The primary focus of this paper is an evaluation of the environmental impacts of growing energy crops. I present an approach for quantitatively evaluating the potential environmental impact of growing energy crops at a regional scale that accounts for the environmental and economic context of the crops. However, to set the stage for this discussion, I begin by comparing the environmental advantages and disadvantages of biomass-derived energy relative to other energy alternatives such as coal, hydropower, nuclear power, oil/gasoline, natural gas and photovoltaics

Impact studies and nuclear power stations

International Nuclear Information System (INIS)

Chambolle, Thierry

1981-01-01

Impact studies form an essential part of environmental protection. The impact study discipline has enabled the EDF to have a better understanding of the effects of nuclear power stations on the environment and to remedy them at the project design stage [fr

Cumulative human impacts on marine predators

DEFF Research Database (Denmark)

Maxwell, Sara M; Hazen, Elliott L; Bograd, Steven J

2013-01-01

Stressors associated with human activities interact in complex ways to affect marine ecosystems, yet we lack spatially explicit assessments of cumulative impacts on ecologically and economically key components such as marine predators. Here we develop a metric of cumulative utilization and impact...

76 FR 21345 - Environmental Impacts Statements;

Science.gov (United States)

2011-04-15

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-8996-4] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-1399 or http://www.epa.gov/compliance/nepa/ Weekly receipt of Environmental Impact Statements Filed 04/04/2011 Through 04...

78 FR 48672 - Environmental Impacts Statements;

Science.gov (United States)

2013-08-09

... ENVIRONMENTAL PROTECTION AGENCY [ER-FRL-9010-5] Environmental Impacts Statements; Notice of Availability Responsible Agency: Office of Federal Activities, General Information (202) 564-7146 or http://www.epa.gov/compliance/nepa/ . Weekly receipt of Environmental Impact Statements Filed 07/29/2013 Through...

Environmental impacts of climate change adaptation

NARCIS (Netherlands)

Enriquez-de-Salamanca, Alvaro; Diaz Sierra, R.; Martin-Aranda, Rosa; Ferreira Dos Santos, M.J.

Climate change adaptation reduces adverse effects of climate change but may also have undesirable environmental impacts. However, these impacts are yet poorly defined and analysed in the existing literature. To complement this knowledge-gap, we reviewed the literature to unveil the relationship

The public health impact of obesity

NARCIS (Netherlands)

Visscher, Tommy L S; Seidell, Jacob C.

2001-01-01

The increase in obesity worldwide will have an important impact on the global incidence of cardiovascular disease, type 2 diabetes mellitus, cancer, osteoarthritis, work disability, and sleep apnea. Obesity has a more pronounced impact on morbidity than on mortality. Disability due to

China's Impact on Latin American Development

DEFF Research Database (Denmark)

Christensen, Steen Fryba

2016-01-01

The study compares recent development experiences of Bolivia and Venezuela and discusses what China's impact has been on their development experiences.......The study compares recent development experiences of Bolivia and Venezuela and discusses what China's impact has been on their development experiences....

10 CFR 51.85 - Draft environmental impact statement-rulemaking.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-rulemaking. 51.85... Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.85 Draft environmental impact... Commission has determined to prepare an environmental impact statement. ...

[Environment and lifestyle: Impacts on male fertility?

Science.gov (United States)

Bendayan, M; Alter, L; Swierkowski-Blanchard, N; Caceres-Sanchez, L; Selva, J; Robin, G; Boitrelle, F

2018-01-01

In this last century, an increase of men infertility has been registered. It has been suggested that environmental factors could a negative impact over sperm quality. Among these factors, impact of environmental toxicant has been spread by media. In this review of scientific literature, we identify several environmental factors that could impact men fertility in a negative way. These factors are tobacco, marijuana, weight, body mass index, heat, nutritional state, electromagnetic waves and altitude. For each of these factors, the impact over men fertility, their mechanism, as well their influence over the use of Assisted Reproductive Technics are reported. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Multiple impacts in dissipative granular chains

CERN Document Server

Nguyen, Ngoc Son

2014-01-01

The extension of collision models for single impacts between two bodies, to the case of multiple impacts (which take place when several collisions occur at the same time in a multibody system) is a challenge in Solid Mechanics, due to the complexity of such phenomena, even in the frictionless case. This monograph aims at presenting the main multiple collision rules proposed in the literature. Such collisions typically occur in granular materials, the simplest of which are made of chains of aligned balls. These chains are used throughout the book to analyze various multiple impact rules which extend the classical Newton (kinematic restitution), Poisson (kinetic restitution) and Darboux-Keller (energetic or kinetic restitution) approaches for impact modelling. The shock dynamics in various types of chains of aligned balls (monodisperse, tapered, decorated, stepped chains) is carefully studied and shown to depend on several parameters: restitution coefficients, contact stiffness ratios, elasticity coefficients (...

Country logistics performance and disaster impact.

Science.gov (United States)

Vaillancourt, Alain; Haavisto, Ira

2016-04-01

The aim of this paper is to deepen the understanding of the relationship between country logistics performance and disaster impact. The relationship is analysed through correlation analysis and regression models for 117 countries for the years 2007 to 2012 with disaster impact variables from the International Disaster Database (EM-DAT) and logistics performance indicators from the World Bank. The results show a significant relationship between country logistics performance and disaster impact overall and for five out of six specific logistic performance indicators. These specific indicators were further used to explore the relationship between country logistic performance and disaster impact for three specific disaster types (epidemic, flood and storm). The findings enhance the understanding of the role of logistics in a humanitarian context with empirical evidence of the importance of country logistics performance in disaster response operations. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.