WorldWideScience

Sample records for sapiens footprint site

  1. Exceptional preservation of children's footprints from a Holocene footprint site in Namibia

    Science.gov (United States)

    Bennett, Matthew R.; Morse, Sarita A.; Liutkus-Pierce, Cynthia; McClymont, Juliet; Evans, Mary; Crompton, Robin H.; Francis Thackeray, J.

    2014-09-01

    Here we report on a Holocene inter-dune site close to Walvis Bay (Namibia) which contains exceptionally well-preserved children's footprints. The footprint surface is dated using Optically Stimulated Luminescence (OSL) methods to approximately 1.5 ka. These dates are compared to those obtained at nearby footprint sites and used to verify a model of diachronous footprint surfaces and also add to the archaeological data available for the communities that occupied these near-coastal areas during the Holocene. This model of diachronous footprint surfaces has implications for other soft-sediment footprint sites such as the 1.5 Ma old footprints at Ileret (Kenya). The distribution of both human and animal tracks, is consistent with the passage of small flock of small ungulates (probably sheep/goats) followed by a group of approximately 9 ± 2 individuals (children or young adults). Age estimates from the tracks suggest that some of the individuals may have been as young as five years old. Variation in track topology across this sedimentologically uniform surface is explained in terms of variations in gait and weight/stature of the individual print makers and is used to corroborate a model of footprint morphology developed at a nearby site. The significance of the site within the literature on human footprints lies in the quality of the track preservation, their topological variability despite a potentially uniform substrate, and the small size of the tracks, and therefore the inferred young age of the track-makers. The site provides an emotive insight into the life of the track-makers.

  2. Progress on Footprint Reduction at the Hanford Site - 12406

    Energy Technology Data Exchange (ETDEWEB)

    McKenney, Dale E. [CH2M HILL, Plateau Remediation Company, Richland, Washington 99352 (United States); Seeley, Paul [Cenibark International, Inc., Richland, Washington 99352 (United States); Farabee, Al [U.S. Department of Energy, Richland Operations Office, Richland, Washington 99352 (United States)

    2012-07-01

    The Department of Energy (DOE) Office of Environmental Management (EM) continues to reduce the footprint of legacy sites throughout the EM complex. Footprint reduction is being accomplished by focusing cleanup activities on decontamination and demolition of excess contaminated facilities, soil and groundwater remediation, and solid waste disposition. All of these initiatives are being accomplished with established technologies in proven regulatory frameworks. Ultimately, completion of these environmental cleanup activities will reduce the monitoring and maintenance costs associated with managing large federal facilities, allowing EM to place more focus on other high priority cleanup efforts and facilitate a successful transition to land-term stewardship of these sites. Through the American Recovery and Reinvestment Act (ARRA) investment, the Department's cleanup footprint has been reduced by 45 percent to date, from 2411 km{sup 2} (931 mi{sup 2}) to 1336 km{sup 2} (516 mi{sup 2}s). With this significant progress on footprint reduction, the Department is on track towards their goal to reduce its overall footprint by approximately 90 percent by 2015. In addition, some areas cleaned up may become available for alternate uses (i.e. recreation, conservation, preservation, industrialization or development). Much of the work to reduce the complex's footprint occurred at the Savannah River Site in South Carolina and the Hanford Site in Washington, but cleanup continues across the complex. Footprint reduction is progressing well at the Hanford Site, supported predominantly through ARRA investment. To date, 994 km{sup 2} (384 mi{sup 2}) (65%) of footprint reduction have been achieved at Hanford, with a goal to achieve a 90% reduction by Fiscal Year 2015. The DOE EM and DOE Richland Operations Office, continue to make great progress to reduce the legacy footprint of the Hanford Site. Footprint reduction is being accomplished by focusing cleanup activities on

  3. The Emergence of Homo sapiens.

    Science.gov (United States)

    Rensberger, Boyce

    1980-01-01

    Describes chronologically the evolution of the human race on earth so as to refute Darwin's theory of descent from animals. Skull fragments from sites around the world suggest at least two possible routes toward the emergence of Homo sapiens sapiens. (Author/SK)

  4. DEFINIENDO HOMO SAPIENS-SAPIENS: APROXIMACIÓN ANTROPOLÓGICA DEFININDO HOMO SAPIENS-SAPIENS: APROXIMAÇÃO ANTROPOLÓGICA DEFINING HOMO SAPIENS-SAPIENS: ANTHROPOLOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Carolina Valdebenito

    2007-06-01

    Full Text Available Este artículo reflexiona sobre los encuentros y desencuentros entre el ser humano y el resto de los animales, en tanto miembros de sistemas en permanente interacción(1. Abordar la definición de Homo, repasar su evolución biológica y cultural y reflexionar sobre los resabios de animalidad que quedan en el comportamiento social del Homo sapiens-sapiens es su objetivo principal. Se busca reflexionar sobre los dilemas morales que acompañan al hombre en tanto ser cultural; para ello se analizan dos dilemas éticos: la violencia y el incestoEste artigo reflete sobre os encontros e desencontros entre o ser humano e os demais animais, enquanto membros de sistemas em permanente interação(1. Seu principal objetivo é abordar a definição de Homo, traçar um panorama de sua evolução biológica e cultural e refletir sobre os resquícios da animalidade que permanecem no comportamento social do Homo sapiens-sapiens. Busca-se refletir sobre os dilemas morais que acompanham o homem enquanto ser cultural, o que para isso são considerados como dilemas éticos: a violência e o incestoThis paper reflects on the similarities and differences between human beings and animals as members of systems in permanent interaction. The main goal is to define Homo, reviewing his/her biological and cultural evolution and reflecting on the animal social behaviors that still remain in Homo sapiens-sapiens. The paper reflect on the moral dilemmas present in humans as cultural beings, taking as example the ethical dilemmas of violence and incest

  5. The evolution of Homo sapiens denisova and Homo sapiens neanderthalensis miRNA targeting genes in the prenatal and postnatal brain.

    Science.gov (United States)

    Gunbin, Konstantin V; Afonnikov, Dmitry A; Kolchanov, Nikolay A; Derevianko, Anatoly P; Rogaev, Eugeny I

    2015-01-01

    As the evolution of miRNA genes has been found to be one of the important factors in formation of the modern type of man, we performed a comparative analysis of the evolution of miRNA genes in two archaic hominines, Homo sapiens neanderthalensis and Homo sapiens denisova, and elucidated the expression of their target mRNAs in bain. A comparative analysis of the genomes of primates, including species in the genus Homo, identified a group of miRNA genes having fixed substitutions with important implications for the evolution of Homo sapiens neanderthalensis and Homo sapiens denisova. The mRNAs targeted by miRNAs with mutations specific for Homo sapiens denisova exhibited enhanced expression during postnatal brain development in modern humans. By contrast, the expression of mRNAs targeted by miRNAs bearing variations specific for Homo sapiens neanderthalensis was shown to be enhanced in prenatal brain development. Our results highlight the importance of changes in miRNA gene sequences in the course of Homo sapiens denisova and Homo sapiens neanderthalensis evolution. The genetic alterations of miRNAs regulating the spatiotemporal expression of multiple genes in the prenatal and postnatal brain may contribute to the progressive evolution of brain function, which is consistent with the observations of fine technical and typological properties of tools and decorative items reported from archaeological Denisovan sites. The data also suggest that differential spatial-temporal regulation of gene products promoted by the subspecies-specific mutations in the miRNA genes might have occurred in the brains of Homo sapiens denisova and Homo sapiens neanderthalensis, potentially contributing to the cultural differences between these two archaic hominines.

  6. DEFINIENDO HOMO SAPIENS-SAPIENS: APROXIMACIÓN ANTROPOLÓGICA DEFININDO HOMO SAPIENS-SAPIENS: APROXIMAÇÃO ANTROPOLÓGICA DEFINING HOMO SAPIENS-SAPIENS: ANTHROPOLOGICAL APPROACH

    OpenAIRE

    Carolina Valdebenito

    2007-01-01

    Este artículo reflexiona sobre los encuentros y desencuentros entre el ser humano y el resto de los animales, en tanto miembros de sistemas en permanente interacción(1). Abordar la definición de Homo, repasar su evolución biológica y cultural y reflexionar sobre los resabios de animalidad que quedan en el comportamiento social del Homo sapiens-sapiens es su objetivo principal. Se busca reflexionar sobre los dilemas morales que acompañan al hombre en tanto ser cultural; para ello se analizan d...

  7. A comparison of tooth structure in Neanderthals and early Homo sapiens sapiens: a radiographic study.

    OpenAIRE

    Zilberman, U; Smith, P

    1992-01-01

    Tooth components of 1st and 2nd erupted permanent molars were measured from standardised radiographs of Homo sapiens sapiens and Homo sapiens neanderthalensis. Enamel height was greater in Homo sapiens sapiens but pulp height and width and the height of the enamel to floor of the pulp chamber were greater in Homo sapiens neanderthalensis. Dentine height, crown width and enamel width showed similar results in the two groups. Unerupted first molars were measured to analyse the influence of func...

  8. Conduction Abnormalities and Pacemaker Implantations After SAPIEN 3 Vs SAPIEN XT Prosthesis Aortic Valve Implantation.

    Science.gov (United States)

    Husser, Oliver; Kessler, Thorsten; Burgdorf, Christof; Templin, Christian; Pellegrini, Costanza; Schneider, Simon; Kasel, Albert Markus; Kastrati, Adnan; Schunkert, Heribert; Hengstenberg, Christian

    2016-02-01

    Transcatheter aortic valve implantation is increasingly used in patients with aortic stenosis. Post-procedural intraventricular conduction abnormalities and permanent pacemaker implantations remain a serious concern. Recently, the Edwards SAPIEN 3 prosthesis has replaced the SAPIEN XT. We sought to determine the incidences of new-onset intraventricular conduction abnormalities and permanent pacemaker implantations by comparing the 2 devices. We analyzed the last consecutive 103 patients undergoing transcatheter aortic valve implantation with SAPIEN XT before SAPIEN 3 was used in the next 105 patients. To analyze permanent pacemaker implantations and new-onset intraventricular conduction abnormalities, patients with these conditions at baseline were excluded. Electrocardiograms were recorded at baseline, after the procedure, and before discharge. SAPIEN 3 was associated with higher device success (100% vs 92%; P=.005) and less paravalvular leakage (0% vs 7%; Ppacemaker implantations was 12.6% (23 of 183) with no difference between the 2 groups (SAPIEN 3: 12.5% [12 of 96] vs SAPIEN XT: 12.6% [11 of 87]; P=.99). SAPIEN 3 was associated with a higher rate of new-onset intraventricular conduction abnormalities (49% vs 27%; P=.007) due to a higher rate of fascicular blocks (17% vs 5%; P=.021). There was no statistically significant difference in transient (29% [20 of 69] vs persistent 19% [12 of 64]; P=.168) left bundle branch blocks (28% [19 of 69] vs 17% [11 of 64]; P=.154) when SAPIEN 3 was compared with SAPIEN XT. We found a trend toward a higher rate of new-onset intraventricular conduction abnormalities with SAPIEN 3 compared with SAPIEN XT, although this did not result in a higher permanent pacemaker implantation rate. Copyright © 2015 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

  9. DEFINIENDO HOMO SAPIENS-SAPIENS: APROXIMACIÓN ANTROPOLÓGICA

    OpenAIRE

    Valdebenito, Carolina

    2007-01-01

    Este artículo reflexiona sobre los encuentros y desencuentros entre el ser humano y el resto de los animales, en tanto miembros de sistemas en permanente interacción(1). Abordar la definición de Homo, repasar su evolución biológica y cultural y reflexionar sobre los resabios de animalidad que quedan en el comportamiento social del Homo sapiens-sapiens es su objetivo principal. Se busca reflexionar sobre los dilemas morales que acompañan al hombre en tanto ser cultural; para ello se analizan d...

  10. Homo sapiens-Specific Binding Site Variants within Brain Exclusive Enhancers Are Subject to Accelerated Divergence across Human Population.

    Science.gov (United States)

    Zehra, Rabail; Abbasi, Amir Ali

    2018-03-01

    Empirical assessments of human accelerated noncoding DNA frgaments have delineated presence of many cis-regulatory elements. Enhancers make up an important category of such accelerated cis-regulatory elements that efficiently control the spatiotemporal expression of many developmental genes. Establishing plausible reasons for accelerated enhancer sequence divergence in Homo sapiens has been termed significant in various previously published studies. This acceleration by including closely related primates and archaic human data has the potential to open up evolutionary avenues for deducing present-day brain structure. This study relied on empirically confirmed brain exclusive enhancers to avoid any misjudgments about their regulatory status and categorized among them a subset of enhancers with an exceptionally accelerated rate of lineage specific divergence in humans. In this assorted set, 13 distinct transcription factor binding sites were located that possessed unique existence in humans. Three of 13 such sites belonging to transcription factors SOX2, RUNX1/3, and FOS/JUND possessed single nucleotide variants that made them unique to H. sapiens upon comparisons with Neandertal and Denisovan orthologous sequences. These variants modifying the binding sites in modern human lineage were further substantiated as single nucleotide polymorphisms via exploiting 1000 Genomes Project Phase3 data. Long range haplotype based tests laid out evidence of positive selection to be governing in African population on two of the modern human motif modifying alleles with strongest results for SOX2 binding site. In sum, our study acknowledges acceleration in noncoding regulatory landscape of the genome and highlights functional parts within it to have undergone accelerated divergence in present-day human population.

  11. New fossils from Jebel Irhoud, Morocco and the pan-African origin of Homo sapiens.

    Science.gov (United States)

    Hublin, Jean-Jacques; Ben-Ncer, Abdelouahed; Bailey, Shara E; Freidline, Sarah E; Neubauer, Simon; Skinner, Matthew M; Bergmann, Inga; Le Cabec, Adeline; Benazzi, Stefano; Harvati, Katerina; Gunz, Philipp

    2017-06-07

    Fossil evidence points to an African origin of Homo sapiens from a group called either H. heidelbergensis or H. rhodesiensis. However, the exact place and time of emergence of H. sapiens remain obscure because the fossil record is scarce and the chronological age of many key specimens remains uncertain. In particular, it is unclear whether the present day 'modern' morphology rapidly emerged approximately 200 thousand years ago (ka) among earlier representatives of H. sapiens or evolved gradually over the last 400 thousand years. Here we report newly discovered human fossils from Jebel Irhoud, Morocco, and interpret the affinities of the hominins from this site with other archaic and recent human groups. We identified a mosaic of features including facial, mandibular and dental morphology that aligns the Jebel Irhoud material with early or recent anatomically modern humans and more primitive neurocranial and endocranial morphology. In combination with an age of 315 ± 34 thousand years (as determined by thermoluminescence dating), this evidence makes Jebel Irhoud the oldest and richest African Middle Stone Age hominin site that documents early stages of the H. sapiens clade in which key features of modern morphology were established. Furthermore, it shows that the evolutionary processes behind the emergence of H. sapiens involved the whole African continent.

  12. Spatial Construction Skills of Chimpanzees ("Pan Troglodytes") and Young Human Children ("Homo Sapiens Sapiens")

    Science.gov (United States)

    Poti, Patrizia; Hayashi, Misato; Matsuzawa, Tetsuro

    2009-01-01

    Spatial construction tasks are basic tests of visual-spatial processing. Two studies have assessed spatial construction skills in chimpanzees (Pan troglodytes) and young children (Homo sapiens sapiens) with a block modelling task. Study 1a subjects were three young chimpanzees and five adult chimpanzees. Study 1b subjects were 30 human children…

  13. Green Remediation Best Management Practices: Overview of EPA's Methodology to Address the Environmental Footprint of Site Cleanup

    Science.gov (United States)

    Contaminated site cleanups involving complex activities may benefit from a detailed environmental footprint analysis to inform decision-making about application of suitable best management practices for greener cleanups.

  14. Programming and Playing with RoboSapien on line

    Directory of Open Access Journals (Sweden)

    Vladimir M Cvjetkovic

    2011-07-01

    Full Text Available RoboSapien is famous human like robot toy intended for playing with, of interested in, of all ages, and learning through the game, of some basic characteristics of robots and robotic control. The programming of RoboSapien as described in user’s manual is limited with the internal memory, battery life, and not very convenient input of actions through the multipurpose buttons of the RoboSapien IR remote control device. In order to offer better conditions for experimenting and using of RoboSapien, the web user interface was developed, that provides interactive user control, programming of command sequences of arbitrary length, observing of RoboSapien actions using the web cam that shows the movements and actions on web page. Access and control of RoboSapien by remote user through the web page user interface, is controlled by access levels depending on whether the user is logged in or not. The whole system is implemented in C# as ASP.NET project with NI USB 6501 digital I/O driving the CMOS 4066 analog switches for controlling the RoboSapien IR remote control device.

  15. Diagnosing Homo sapiens in the fossil record.

    Science.gov (United States)

    Stringer, Christopher Brian; Buck, Laura Tabitha

    2014-01-01

    Diagnosing Homo sapiens is a critical question in the study of human evolution. Although what constitutes living members of our own species is straightforward, in the fossil record this is still a matter of much debate. The issue is complicated by questions of species diagnoses and ideas about the mode by which a new species is born, by the arguments surrounding the behavioural and cognitive separateness of the species, by the increasing appreciation of variation in the early African H. sapiens record and by new DNA evidence of hybridization with extinct species. This study synthesizes thinking on the fossils, archaeology and underlying evolutionary models of the last several decades with recent DNA results from both H. sapiens and fossil species. It is concluded that, although it may not be possible or even desirable to cleanly partition out a homogenous morphological description of recent H. sapiens in the fossil record, there are key, distinguishing morphological traits in the cranium, dentition and pelvis that can be usefully employed to diagnose the H. sapiens lineage. Increasing advances in retrieving and understanding relevant genetic data provide a complementary and perhaps potentially even more fruitful means of characterizing the differences between H. sapiens and its close relatives.

  16. Homo sapiens in Arabia by 85,000 years ago.

    Science.gov (United States)

    Groucutt, Huw S; Grün, Rainer; Zalmout, Iyad A S; Drake, Nick A; Armitage, Simon J; Candy, Ian; Clark-Wilson, Richard; Louys, Julien; Breeze, Paul S; Duval, Mathieu; Buck, Laura T; Kivell, Tracy L; Pomeroy, Emma; Stephens, Nicholas B; Stock, Jay T; Stewart, Mathew; Price, Gilbert J; Kinsley, Leslie; Sung, Wing Wai; Alsharekh, Abdullah; Al-Omari, Abdulaziz; Zahir, Muhammad; Memesh, Abdullah M; Abdulshakoor, Ammar J; Al-Masari, Abdu M; Bahameem, Ahmed A; Al Murayyi, Khaled M S; Zahrani, Badr; Scerri, Eleanor L M; Petraglia, Michael D

    2018-05-01

    Understanding the timing and character of the expansion of Homo sapiens out of Africa is critical for inferring the colonization and admixture processes that underpin global population history. It has been argued that dispersal out of Africa had an early phase, particularly ~130-90 thousand years ago (ka), that reached only the East Mediterranean Levant, and a later phase, ~60-50 ka, that extended across the diverse environments of Eurasia to Sahul. However, recent findings from East Asia and Sahul challenge this model. Here we show that H. sapiens was in the Arabian Peninsula before 85 ka. We describe the Al Wusta-1 (AW-1) intermediate phalanx from the site of Al Wusta in the Nefud desert, Saudi Arabia. AW-1 is the oldest directly dated fossil of our species outside Africa and the Levant. The palaeoenvironmental context of Al Wusta demonstrates that H. sapiens using Middle Palaeolithic stone tools dispersed into Arabia during a phase of increased precipitation driven by orbital forcing, in association with a primarily African fauna. A Bayesian model incorporating independent chronometric age estimates indicates a chronology for Al Wusta of ~95-86 ka, which we correlate with a humid episode in the later part of Marine Isotope Stage 5 known from various regional records. Al Wusta shows that early dispersals were more spatially and temporally extensive than previously thought. Early H. sapiens dispersals out of Africa were not limited to winter rainfall-fed Levantine Mediterranean woodlands immediately adjacent to Africa, but extended deep into the semi-arid grasslands of Arabia, facilitated by periods of enhanced monsoonal rainfall.

  17. Homo sapiens zestárl o 100 tisíc let

    Czech Academy of Sciences Publication Activity Database

    Nývltová Fišáková, Miriam

    2017-01-01

    Roč. 1, č. 3 (2017), s. 12 ISSN 2533-784X Institutional support: RVO:68081758 Keywords : paleoanthropology * hominization * Homo sapiens * human fossils * archaeological dating Subject RIV: AC - Archeology, Anthropology, Ethnology http://www.avcr.cz/opencms/export/sites/avcr.cz/.content/galerie-souboru/AB/A_03_2017_web.pdf

  18. What constitutes Homo sapiens? Morphology versus received wisdom.

    Science.gov (United States)

    Schwartz, Jeffrey

    2016-06-20

    Although Linnaeus coined Homo sapiens in 1735, it was Blumenbach forty years later who provided the first morphological definition of the species. Since humans were not then allowed to be ante-Diluvian, his effort applied to the genus, as well. After the Feldhofer Grotto Neanderthal disproved this creationist notion, and human-fossil hunting became legitimate, new specimens were allocated either to sapiens or new species within Homo, or even to new species within new genera. Yet as these taxonomic acts reflected the morphological differences between specimens, they failed to address the question: What constitutes H. sapiens? When in 1950 Mayr collapsed all human fossils into Homo, he not only denied humans a diverse evolutionary past, he also shifted the key to identifying its species from morphology to geological age - a practice most paleoanthropologists still follow. Thus, for example, H. erectus is the species that preceded H. sapiens, and H. sapiens is the species into which H. erectus morphed. In order to deal with a growing morass of morphologically dissimilar specimens, the non-taxonomic terms "archaic" (AS) and "anatomically modern" (AMS) were introduced to distinguish between the earlier and later versions of H. sapiens, thereby making the species impossible to define. In attempting to disentangle fact from scenario, I begin from the beginning, trying to delineate features that may be distinctive of extant humans (ES), and then turning to the fossils that have been included in the species. With the exception of Upper Paleolithic humans - e.g. from Cro-Magnon, Dolni Vestonice, Mladeč - I argue that many specimens regarded as AMS, and all those deemed AS, are not H. sapiens. The features these AMS do share with ES suggest the existence of a sapiens clade. Further, restudy of near-recent fossils, especially from southwestern China (∼11-14.5 ka), reinforces what discoveries such as H. floresiensis indicate: "If it's recent, it's not necessarily H. sapiens".

  19. Holocene footprints in Namibia: the influence of substrate on footprint variability.

    Science.gov (United States)

    Morse, Sarita A; Bennett, Matthew R; Liutkus-Pierce, Cynthia; Thackeray, Francis; McClymont, Juliet; Savage, Russell; Crompton, Robin H

    2013-06-01

    We report a Holocene human and animal footprint site from the Namib Sand Sea, south of Walvis Bay, Namibia. Using these data, we explore intratrail footprint variability associated with small variations in substrate properties using a "whole foot" analytical technique developed for the studies in human ichnology. We demonstrate high levels of intratrail variability as a result of variations in grain size, depositional moisture content, and the degree of sediment disturbance, all of which determine the bearing capacity of the substrate. The two principal trails were examined, which had consistent stride and step lengths, and as such variations in print typology were primarily controlled by substrate rather than locomotor mechanics. Footprint typology varies with bearing capacity such that firm substrates show limited impressions associated with areas of peak plantar pressure, whereas softer substrates are associated with deep prints with narrow heels and reduced medial longitudinal arches. Substrates of medium bearing capacity give displacement rims and proximal movement of sediment, which obscures the true form of the medial longitudinal arch. A simple conceptual model is offered which summarizes these conclusions and is presented as a basis for further investigation into the control of substrate on footprint typology. The method, model, and results presented here are essential in the interpretation of any sites of greater paleoanthropological significance, such as recently reported from Ileret (1.5 Ma, Kenya; Bennett et al.: Science 323 (2009) 1197-1201). Copyright © 2013 Wiley Periodicals, Inc.

  20. Protein-protein interaction site prediction in Homo sapiens and E. coli using an interaction-affinity based membership function in fuzzy SVM.

    Science.gov (United States)

    Sriwastava, Brijesh Kumar; Basu, Subhadip; Maulik, Ujjwal

    2015-10-01

    Protein-protein interaction (PPI) site prediction aids to ascertain the interface residues that participate in interaction processes. Fuzzy support vector machine (F-SVM) is proposed as an effective method to solve this problem, and we have shown that the performance of the classical SVM can be enhanced with the help of an interaction-affinity based fuzzy membership function. The performances of both SVM and F-SVM on the PPI databases of the Homo sapiens and E. coli organisms are evaluated and estimated the statistical significance of the developed method over classical SVM and other fuzzy membership-based SVM methods available in the literature. Our membership function uses the residue-level interaction affinity scores for each pair of positive and negative sequence fragments. The average AUC scores in the 10-fold cross-validation experiments are measured as 79.94% and 80.48% for the Homo sapiens and E. coli organisms respectively. On the independent test datasets, AUC scores are obtained as 76.59% and 80.17% respectively for the two organisms. In almost all cases, the developed F-SVM method improves the performances obtained by the corresponding classical SVM and the other classifiers, available in the literature.

  1. Taxonomic differences in deciduous upper second molar crown outlines of Homo sapiens, Homo neanderthalensis and Homo erectus.

    Science.gov (United States)

    Bailey, Shara E; Benazzi, Stefano; Souday, Caroline; Astorino, Claudia; Paul, Kathleen; Hublin, Jean-Jacques

    2014-07-01

    A significant number of Middle to Late Pleistocene sites contain primarily (and sometimes only) deciduous teeth (e.g., Grotta del Cavallo, Mezmaiskaya, Blombos). Not surprisingly, there has been a recent renewed interest in deciduous dental variation, especially in the context of distinguishing Homo neanderthalensis and Homo sapiens. Most studies of the deciduous dentition of fossil hominins have focused on standard metrical variation but morphological (non-metric and morphometric) variation also promises to shed light on long standing taxonomic questions. This study examines the taxonomic significance of the crown outline of the deciduous upper second molar through principal components analysis and linear discriminant analysis. We examine whether or not the crown shape of the upper deciduous second molar separates H. neanderthalensis from H. sapiens and explore whether it can be used to correctly assign individuals to taxa. It builds on previous studies by focusing on crown rather than cervical outline and by including a large sample of geographically diverse recent human populations. Our samples include 17 H. neanderthalensis, five early H. sapiens, and 12 Upper Paleolithic H. sapiens. In addition, we include two Homo erectus specimens in order to evaluate the polarity of crown shape differences observed between H. neanderthalensis and H. sapiens. Our results show that crown outline shape discriminates H. sapiens and H. neanderthalensis quite well, but does not do well at distinguishing H. erectus from H. sapiens. We conclude that the crown outline shape observed in H. sapiens is a primitive retention and that the skewed shape observed in H. neanderthalensis is a derived condition. Finally, we explore the phylogenetic implications of the results for the H. erectus molars. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Update of a footprint-based approach for the characterisation of complex measurement sites

    DEFF Research Database (Denmark)

    Goeckede, M.; Markkanen, T.; Hasager, C.B.

    2006-01-01

    , and the determination of effective roughness lengths with a flux aggregation model in a pre-processing step. Detailed terrain data gathered by remote sensing methods are included. This approach determines spatial structures in the quality of flux data for varying meteorological conditions. The results help to identify...... terrain influences affecting the quality of flux data, such as dominating obstacles upwind of the site, or slopes biasing the wind field, so that the most suitable footprint regions for the collection of high-quality datasets can be identified. Additionally, the approach can be used to evaluate...

  3. Unrealistic phylogenetic trees may improve phylogenetic footprinting.

    Science.gov (United States)

    Nettling, Martin; Treutler, Hendrik; Cerquides, Jesus; Grosse, Ivo

    2017-06-01

    The computational investigation of DNA binding motifs from binding sites is one of the classic tasks in bioinformatics and a prerequisite for understanding gene regulation as a whole. Due to the development of sequencing technologies and the increasing number of available genomes, approaches based on phylogenetic footprinting become increasingly attractive. Phylogenetic footprinting requires phylogenetic trees with attached substitution probabilities for quantifying the evolution of binding sites, but these trees and substitution probabilities are typically not known and cannot be estimated easily. Here, we investigate the influence of phylogenetic trees with different substitution probabilities on the classification performance of phylogenetic footprinting using synthetic and real data. For synthetic data we find that the classification performance is highest when the substitution probability used for phylogenetic footprinting is similar to that used for data generation. For real data, however, we typically find that the classification performance of phylogenetic footprinting surprisingly increases with increasing substitution probabilities and is often highest for unrealistically high substitution probabilities close to one. This finding suggests that choosing realistic model assumptions might not always yield optimal predictions in general and that choosing unrealistically high substitution probabilities close to one might actually improve the classification performance of phylogenetic footprinting. The proposed PF is implemented in JAVA and can be downloaded from https://github.com/mgledi/PhyFoo. : martin.nettling@informatik.uni-halle.de. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press.

  4. Quality control of CarboEurope flux data - Part 1: Coupling footprint analyses with flux data quality assessment to evaluate sites in forest ecosystems

    DEFF Research Database (Denmark)

    Göckede, M.; Foken, T.; Aubinet, M.

    2008-01-01

    We applied a site evaluation approach combining Lagrangian Stochastic footprint modeling with a quality assessment approach for eddy-covariance data to 25 forested sites of the CarboEurope-IP network. The analysis addresses the spatial representativeness of the flux measurements, instrumental...... of the surrounding terrain, while the latent heat flux is subject to instrumentation-related problems. The Planar-Fit coordinate rotation proved to be a reliable tool for the majority of the sites using only a single set of rotation angles. Overall, we found a high average data quality for the CarboEurope-IP network...... effects on data quality, spatial patterns in the data quality, and the performance of the coordinate rotation method. Our findings demonstrate that application of a footprint filter could strengthen the CarboEurope-IP flux database, since only one third of the sites is situated in truly homogeneous...

  5. Sacral Variability in Tailless Species: Homo sapiens and Ochotona princeps.

    Science.gov (United States)

    Tague, Robert G

    2017-05-01

    Homo sapiens is variable in number of sacral vertebrae, and this variability can lead to obstetrical complication. This study uses the comparative method to test the hypothesis that sacral variability in H. sapiens is associated with absence of a tail. Three species of lagomorphs are studied: Ochotona princeps (N = 271), which is tailless, and Lepus californicus (N = 212) and Sylvilagus audubonii (N = 206), which have tails. Results show that O. princeps has (1) higher diversity index for number of sacral vertebrae (0.49) compared to L. californicus (0.25) and S. audubonii (0.26) and (2) significantly higher percentage of individuals with the species-specific nonmodal number of sacral vertebrae (43.9%) compared to L. californicus (14.2%) and S. audubonii (15.5%). Comparison of H. sapiens (N = 1,030; individuals of age 20-39 years) with O. princeps shows similarities between the species in diversity index (also 0.49 in H. sapiens) and percentage of individuals with nonmodal number of sacral vertebrae (37.3% in H. sapiens). Homeotic transformation best explains the results. H. sapiens and O. princeps show propensity for caudal shift at the sacral-caudal border (i.e., homeotic transformation of the first caudal vertebra to a sacral vertebra). Caudal and cranial shift among presacral vertebrae increases or decreases this propensity, respectively. Increase in number of sacral vertebrae in H. sapiens by homeotic transformation reduces pelvic outlet capacity and can be obstetrically hazardous. Anat Rec, 300:798-809, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  6. The origin and evolution of Homo sapiens.

    Science.gov (United States)

    Stringer, Chris

    2016-07-05

    If we restrict the use of Homo sapiens in the fossil record to specimens which share a significant number of derived features in the skeleton with extant H. sapiens, the origin of our species would be placed in the African late middle Pleistocene, based on fossils such as Omo Kibish 1, Herto 1 and 2, and the Levantine material from Skhul and Qafzeh. However, genetic data suggest that we and our sister species Homo neanderthalensis shared a last common ancestor in the middle Pleistocene approximately 400-700 ka, which is at least 200 000 years earlier than the species origin indicated from the fossils already mentioned. Thus, it is likely that the African fossil record will document early members of the sapiens lineage showing only some of the derived features of late members of the lineage. On that basis, I argue that human fossils such as those from Jebel Irhoud, Florisbad, Eliye Springs and Omo Kibish 2 do represent early members of the species, but variation across the African later middle Pleistocene/early Middle Stone Age fossils shows that there was not a simple linear progression towards later sapiens morphology, and there was chronological overlap between different 'archaic' and 'modern' morphs. Even in the late Pleistocene within and outside Africa, we find H. sapiens specimens which are clearly outside the range of Holocene members of the species, showing the complexity of recent human evolution. The impact on species recognition of late Pleistocene gene flow between the lineages of modern humans, Neanderthals and Denisovans is also discussed, and finally, I reconsider the nature of the middle Pleistocene ancestor of these lineages, based on recent morphological and genetic data.This article is part of the themed issue 'Major transitions in human evolution'. © 2016 The Author(s).

  7. Pygmoid Australomelanesian Homo sapiens skeletal remains from Liang Bua, Flores: population affinities and pathological abnormalities.

    Science.gov (United States)

    Jacob, T; Indriati, E; Soejono, R P; Hsü, K; Frayer, D W; Eckhardt, R B; Kuperavage, A J; Thorne, A; Henneberg, M

    2006-09-05

    Liang Bua 1 (LB1) exhibits marked craniofacial and postcranial asymmetries and other indicators of abnormal growth and development. Anomalies aside, 140 cranial features place LB1 within modern human ranges of variation, resembling Australomelanesian populations. Mandibular and dental features of LB1 and LB6/1 either show no substantial deviation from modern Homo sapiens or share features (receding chins and rotated premolars) with Rampasasa pygmies now living near Liang Bua Cave. We propose that LB1 is drawn from an earlier pygmy H. sapiens population but individually shows signs of a developmental abnormality, including microcephaly. Additional mandibular and postcranial remains from the site share small body size but not microcephaly.

  8. Similar Pathogen Targets in Arabidopsis thaliana and Homo sapiens Protein Networks

    Science.gov (United States)

    2012-09-21

    Similar Pathogen Targets in Arabidopsis thaliana and Homo sapiens Protein Networks Paulo Shakarian1*, J. Kenneth Wickiser2 1 Paulo Shakarian...significantly attacked. Citation: Shakarian P, Wickiser JK (2012) Similar Pathogen Targets in Arabidopsis thaliana and Homo sapiens Protein Networks...to 00-00-2012 4. TITLE AND SUBTITLE Similar Pathogen Targets in Arabidopsis thaliana and Homo sapiens Protein Networks 5a. CONTRACT NUMBER 5b

  9. Morphological comparison of archaic Homo sapiens crania from China and Africa.

    Science.gov (United States)

    Wu, X; Bräuer, G

    1993-12-01

    Regional features play a great role in the analysis of the differentiations of Homo erectus and Homo sapiens. However, this poses the question how widespread and variable these features are. In order to examine this with regard to the features commonly seen in China their occurrence and variability were determined in Chinese as well as in African crania of archaic and late Pleistocene/Holocene modern Homo sapiens. Furthermore, some features known from Africa were examined with regard to their occurrence and variability in China. Although the variability might change due to new finds, the present results for some features point to larger morphological spectra in the African than in the Chinese archaic Homo sapiens. It is furthermore remarkable that the early modern Chinese in many features show deviations from the pattern of archaic Homo sapiens of this region and exhibit broader spectra similar to those seen in African archaic and early modern Homo sapiens.

  10. The origin and evolution of Homo sapiens

    OpenAIRE

    Stringer, Chris

    2016-01-01

    If we restrict the use of Homo sapiens in the fossil record to specimens which share a significant number of derived features in the skeleton with extant H. sapiens, the origin of our species would be placed in the African late middle Pleistocene, based on fossils such as Omo Kibish 1, Herto 1 and 2, and the Levantine material from Skhul and Qafzeh. However, genetic data suggest that we and our sister species Homo neanderthalensis shared a last common ancestor in the middle Pleistocene approx...

  11. Savannah River Site Footprint Reduction Results under the American Recovery and Reinvestment Act - 13302

    Energy Technology Data Exchange (ETDEWEB)

    Flora, Mary [Savannah River Nuclear Solutions Bldg. 730-4B, Aiken, SC 29808 (United States); Adams, Angelia [United States Department of Energy Bldg. 730-B, Aiken, SC 29808 (United States); Pope, Robert [United States Environmental Protection Agency Region IV Atlanta, GA 30303 (United States)

    2013-07-01

    The Savannah River Site (SRS) is an 802 square-kilometer United States Department of Energy (US DOE) nuclear facility located along the Savannah River near Aiken, South Carolina, managed and operated by Savannah River Nuclear Solutions. Construction of SRS began in the early 1950's to enhance the nation's nuclear weapons capability. Nuclear weapons material production began in the early 1950's, eventually utilizing five production reactors constructed to support the national defense mission. Past operations have resulted in releases of hazardous constituents and substances to soil and groundwater, resulting in 515 waste sites with contamination exceeding regulatory thresholds. More than 1,000 facilities were constructed onsite with approximately 300 of them considered radiological, nuclear or industrial in nature. In 2003, SRS entered into a Memorandum of Agreement with its regulators to accelerate the cleanup using an Area Completion strategy. The strategy was designed to focus cleanup efforts on the 14 large industrial areas of the site to realize efficiencies of scale in the characterization, assessment, and remediation activities. This strategy focuses on addressing the contaminated surface units and the vadose zone and addressing groundwater plumes subsequently. This approach streamlines characterization and remediation efforts as well as the required regulatory documentation, while enhancing the ability to make large-scale cleanup decisions. In February 2009, Congress approved the American Reinvestment and Recovery Act (ARRA) to create jobs and promote economic recovery. At SRS, ARRA funding was established in part to accelerate the completion of environmental remediation and facility deactivation and decommissioning (D and D). By late 2012, SRS achieved 85 percent footprint reduction utilizing ARRA funding by accelerating and coupling waste unit remediation with D and D of remnant facilities. Facility D and D activities were sequenced and

  12. Stravovacích návyky z hlediska fylogeneze Homo sapiens sapiens.

    OpenAIRE

    HOLÁ, Marcela

    2010-01-01

    This Bachelor's thesis on the synthesis of literature, is attempting to create an overview of our human ancestor's dietary habits. The time frame is from the oldest representative of the hominoid family, genus Ardipithecus ramidus, to neolithic Homo sapiens.This will show the connection between the changing food spectrum and the phylogeny of our species.

  13. Fossil evidence for the origin of Homo sapiens.

    Science.gov (United States)

    Schwartz, Jeffrey H; Tattersall, Ian

    2010-01-01

    Our species Homo sapiens has never received a satisfactory morphological definition. Deriving partly from Linnaeus's exhortation simply to "know thyself," and partly from the insistence by advocates of the Evolutionary Synthesis in the mid-20th Century that species are constantly transforming ephemera that by definition cannot be pinned down by morphology, this unfortunate situation has led to huge uncertainty over which hominid fossils ought to be included in H. sapiens, and even over which of them should be qualified as "archaic" or as "anatomically modern," a debate that is an oddity in the broader context of paleontology. Here, we propose a suite of features that seems to characterize all H. sapiens alive today, and we review the fossil evidence in light of those features, paying particular attention to the bipartite brow and the "chin" as examples of how, given the continuum from developmentally regulated genes to adult morphology, we might consider features preserved in fossil specimens in a comparative analysis that includes extant taxa. We also suggest that this perspective on the origination of novelty, which has gained a substantial foothold in the general field of evolutionary developmental biology, has an intellectual place in paleoanthropology and hominid systematics, including in defining our species, H. sapiens. Beginning solely with the distinctive living species reveals a startling variety in morphologies among late middle and late Pleistocene hominids, none of which can be plausibly attributed to H. sapiens/H. neanderthalensis admixture. Allowing for a slightly greater envelope of variation than exists today, basic "modern" morphology seems to have appeared significantly earlier in time than the first stirrings of the modern symbolic cognitive system. Copyright © 2010 Wiley-Liss, Inc.

  14. Experimentally generated footprints in sand: Analysis and consequences for the interpretation of fossil and forensic footprints.

    Science.gov (United States)

    D'Août, Kristiaan; Meert, L; Van Gheluwe, B; De Clercq, D; Aerts, P

    2010-04-01

    Fossilized footprints contain information about the dynamics of gait, but their interpretation is difficult, as they are the combined result of foot anatomy, gait dynamics, and substrate properties. We explore how footprints are generated in modern humans. Sixteen healthy subjects walked on a solid surface and in a layer of fine-grained sand. In each condition, 3D kinematics of the leg and foot were analyzed for three trials at preferred speed, using an infrared camera system. Additionally, calibrated plantar pressures were recorded. After each trial in sand, the depth of the imprint was measured under specific sites. When walking in sand, subjects showed greater toe clearance during swing and a 7 degrees higher knee yield during stance. Maximal pressure was the most influential factor for footprint depth under the heel. For other foot zones, a combination of factors correlates with imprint depth, with pressure impulse (the pressure-time integral) gaining importance distally, at the metatarsal heads and the hallux. We conclude that footprint topology cannot be related to a single variable, but that different zones of the footprint reflect different aspects of the kinesiology of walking. Therefore, an integrated approach, combining anatomical, kinesiological, and substrate-mechanical insights, is necessary for a correct interpretation. (c) 2009 Wiley-Liss, Inc.

  15. Rethinking the dispersal of Homo sapiens out of Africa.

    Science.gov (United States)

    Groucutt, Huw S; Petraglia, Michael D; Bailey, Geoff; Scerri, Eleanor M L; Parton, Ash; Clark-Balzan, Laine; Jennings, Richard P; Lewis, Laura; Blinkhorn, James; Drake, Nick A; Breeze, Paul S; Inglis, Robyn H; Devès, Maud H; Meredith-Williams, Matthew; Boivin, Nicole; Thomas, Mark G; Scally, Aylwyn

    2015-01-01

    Current fossil, genetic, and archeological data indicate that Homo sapiens originated in Africa in the late Middle Pleistocene. By the end of the Late Pleistocene, our species was distributed across every continent except Antarctica, setting the foundations for the subsequent demographic and cultural changes of the Holocene. The intervening processes remain intensely debated and a key theme in hominin evolutionary studies. We review archeological, fossil, environmental, and genetic data to evaluate the current state of knowledge on the dispersal of Homo sapiens out of Africa. The emerging picture of the dispersal process suggests dynamic behavioral variability, complex interactions between populations, and an intricate genetic and cultural legacy. This evolutionary and historical complexity challenges simple narratives and suggests that hybrid models and the testing of explicit hypotheses are required to understand the expansion of Homo sapiens into Eurasia. © 2015 Wiley Periodicals, Inc.

  16. Are Homo sapiens nonsupranuchal fossa and Neanderthal suprainiac fossa convergent traits?

    Science.gov (United States)

    Nowaczewska, Wioletta

    2011-04-01

    The autapomorphic status of the Neanderthal suprainiac fossa was recently confirmed. This was a result of a detailed analysis of the internal bone composition in the area of the suprainiac depression on Neanderthal and Homo sapiens specimens. However, while anatomical differences between Neanderthal suprainiac fossa and the depression in the inion region of the occipital bone of fossil and recent Homo sapiens have been discussed in detail, the etiology of these structures has not been resolved. In this article, the hypothesis that the Homo sapiens non-supranuchal fossa and the Neanderthal suprainiac fossa both formed to maintain the optimal shape of the occipital plane (to minimize strain on the posterior cranial vault) is tested. First, the variation in the expression of the fossa above inion in the crania of recent Homo sapiens from European, African, and Australian samples was examined, and the degree of structural similarity between these depressions and the Neanderthal suprainiac fossa was assessed. Next, the relationship between the shape of the occipital squama in the midsagittal plane and two particular features (the degree of the occipital torus development and the occurrence of a depression in the inion region that is not the supranuchal fossa) were analyzed. Based on the results, it is suggested that the Homo sapiens non-supranuchal fossa and Neanderthal suprainiac fossa are convergent traits. Copyright © 2010 Wiley-Liss, Inc.

  17. Nesting sites characteristics of stingless bees (Hymenoptera: Apidae in Central Sulawesi, Indonesia

    Directory of Open Access Journals (Sweden)

    Nelky Suriawanto

    2017-06-01

    Full Text Available Stingless bees (Hymenoptera: Apidae is eusocial insects that live together in a colony. This research was aimed to study the nesting site characteristics of stingless bees in the settlement areas at Central Sulawesi, Indonesia. The nesting sites were observed by purposive sampling method from July 2015 to January 2016. Four species belong to genus Tetragonula were found, namely T. fuscobalteata, T. biroi, T. sapiens, and T. laeviceps. Two spesies, T. biroi and T. sapiens are the new record in Sulawesi island. The highest abundance of stingless bees colony was T. fuscobalteata (92.26%, followed by T. biroi (4.17%, T. sapiens (2.98%, and T. laeviceps (0.59%. Nesting sites of T. fuscobalteata were found in the stone, brick wall, wooden wall, bamboo, and iron cavities, T. biroi in the wooden wall, stone, and brick wall cavities, T. sapiens in stone cavities, while T. laeviceps in wooden walls.

  18. Homo sapiens as physician and patient: a view from Darwinian medicine.

    Science.gov (United States)

    Román-Franco, Angel A

    2013-09-01

    Medicine's cardinal diagnostic and therapeutic resource is the clinical encounter. Over the last two centuries and particularly over the last five decades the function of the clinical encounter has been eroded to the point of near irrelevance because of the atomized and atomizing influence of technology and microspecialization. Meanwhile, over the past five decades the exceptionalist view of Homo sapiens inherent in the social and religious traditions of the West has similarly undergone radical changes. H. sapiens is now best understood as a microecosystem integrated into a much broader ecosystem: the biosphere. That human microecosystem is composed of constituents derived from the archaeal, bacterial, and eukaryan domains via endosymbiotic, commensalistic and mutualistic interactions. This amalgamation of 100 trillion cells and viral elements is regulated by a composite genome aggregated over the 3.8 billion years of evolutionary history of organic life. No component of H. sapiens or its genome can be identified as irreducibly and exclusively human. H. sapiens' humanity is an emergent property of the microecosystem. Ironically as H. sapiens is viewed by evolutionary science in a highly integrated manner medicine approaches it as a balkanized, deaggregated entity through the eye of 150 different specialties. To effectively address the needs of H sapiens in its role as patient by the same species in its role as physician the disparate views must be harmonized. Here I review some conceptual elements that would assist a physician in addressing the needs of the patient in integrum, as a microecosystem, by the former address the latter as a historical gestalt being. The optimal way to recover the harmony between patient and physician is through a revitalization of the clinical encounter via an ecological and Darwinian epistemology.

  19. The blue water footprint of electricity from hydropower

    Directory of Open Access Journals (Sweden)

    M. M. Mekonnen

    2012-01-01

    Full Text Available Hydropower accounts for about 16% of the world's electricity supply. It has been debated whether hydroelectric generation is merely an in-stream water user or whether it also consumes water. In this paper we provide scientific support for the argument that hydroelectric generation is in most cases a significant water consumer. The study assesses the blue water footprint of hydroelectricity – the water evaporated from manmade reservoirs to produce electric energy – for 35 selected sites. The aggregated blue water footprint of the selected hydropower plants is 90 Gm3 yr−1, which is equivalent to 10% of the blue water footprint of global crop production in the year 2000. The total blue water footprint of hydroelectric generation in the world must be considerably larger if one considers the fact that this study covers only 8% of the global installed hydroelectric capacity. Hydroelectric generation is thus a significant water consumer. The average water footprint of the selected hydropower plants is 68 m3 GJ−1. Great differences in water footprint among hydropower plants exist, due to differences in climate in the places where the plants are situated, but more importantly as a result of large differences in the area flooded per unit of installed hydroelectric capacity. We recommend that water footprint assessment is added as a component in evaluations of newly proposed hydropower plants as well as in the evaluation of existing hydroelectric dams, so that the consequences of the water footprint of hydroelectric generation on downstream environmental flows and other water users can be evaluated.

  20. A comparison of footprint indexes calculated from ink and electronic footprints.

    Science.gov (United States)

    Urry, S R; Wearing, S C

    2001-04-01

    Pressure platforms offer the potential to measure and record electronic footprints rapidly; however, the accuracy of geometric indexes derived from these prints has not been investigated. A comparison of conventional ink footprints with simultaneously acquired electronic prints revealed significant differences in several geometric indexes. The contact area was consistently underestimated by the electronic prints and resulted in a significant change in the arch index. The long plantar angle was poorly correlated between techniques. This study demonstrated that electronic footprints, derived from a pressure platform, are not representative of the equivalent ink footprints and, consequently, should not be interpreted with reference to literature on conventional footprints.

  1. Carbon footprint of grain production in China.

    Science.gov (United States)

    Zhang, Dan; Shen, Jianbo; Zhang, Fusuo; Li, Yu'e; Zhang, Weifeng

    2017-06-29

    Due to the increasing environmental impact of food production, carbon footprint as an indicator can guide farmland management. This study established a method and estimated the carbon footprint of grain production in China based on life cycle analysis (LCA). The results showed that grain production has a high carbon footprint in 2013, i.e., 4052 kg ce/ha or 0.48 kg ce/kg for maize, 5455 kg ce/ha or 0.75 kg ce/kg for wheat and 11881 kg ce/ha or 1.60 kg ce/kg for rice. These footprints are higher than that of other countries, such as the United States, Canada and India. The most important factors governing carbon emissions were the application of nitrogen fertiliser (8-49%), straw burning (0-70%), energy consumption by machinery (6-40%), energy consumption for irrigation (0-44%) and CH 4 emissions from rice paddies (15-73%). The most important carbon sequestration factors included returning of crop straw (41-90%), chemical nitrogen fertiliser application (10-59%) and no-till farming practices (0-10%). Different factors dominated in different crop systems in different regions. To identity site-specific key factors and take countermeasures could significantly lower carbon footprint, e.g., ban straw burning in northeast and south China, stopping continuous flooding irrigation in wheat and rice production system.

  2. Mandibular molar root morphology in Neanderthals and Late Pleistocene and recent Homo sapiens.

    Science.gov (United States)

    Kupczik, Kornelius; Hublin, Jean-Jacques

    2010-11-01

    Neanderthals have a distinctive suite of dental features, including large anterior crown and root dimensions and molars with enlarged pulp cavities. Yet, there is little known about variation in molar root morphology in Neanderthals and other recent and fossil members of Homo. Here, we provide the first comprehensive metric analysis of permanent mandibular molar root morphology in Middle and Late Pleistocene Homo neanderthalensis, and Late Pleistocene (Aterian) and recent Homo sapiens. We specifically address the question of whether root form can be used to distinguish between these groups and assess whether any variation in root form can be related to differences in tooth function. We apply a microtomographic imaging approach to visualise and quantify the external and internal dental morphologies of both isolated molars and molars embedded in the mandible (n=127). Univariate and multivariate analyses reveal both similarities (root length and pulp volume) and differences (occurrence of pyramidal roots and dental tissue volume proportion) in molar root morphology among penecontemporaneous Neanderthals and Aterian H. sapiens. In contrast, the molars of recent H. sapiens are markedly smaller than both Pleistocene H. sapiens and Neanderthals, but share with the former the dentine volume reduction and a smaller root-to-crown volume compared with Neanderthals. Furthermore, we found the first molar to have the largest average root surface area in recent H. sapiens and Neanderthals, although in the latter the difference between M(1) and M(2) is small. In contrast, Aterian H. sapiens root surface areas peak at M(2). Since root surface area is linked to masticatory function, this suggests a distinct occlusal loading regime in Neanderthals compared with both recent and Pleistocene H. sapiens. Copyright © 2010 Elsevier Ltd. All rights reserved.

  3. Sapiens a brief history of humankind

    CERN Document Server

    Harari, Yuval Noah

    2015-01-01

    From a renowned historian comes a groundbreaking narrative of humanity’s creation and evolution—a #1 international bestseller—that explores the ways in which biology and history have defined us and enhanced our understanding of what it means to be “human.” One hundred thousand years ago, at least six different species of humans inhabited Earth. Yet today there is only one—homo sapiens. What happened to the others? And what may happen to us? Most books about the history of humanity pursue either a historical or a biological approach, but Dr. Yuval Noah Harari breaks the mold with this highly original book that begins about 70,000 years ago with the appearance of modern cognition. From examining the role evolving humans have played in the global ecosystem to charting the rise of empires, Sapiens integrates history and science to reconsider accepted narratives, connect past developments with contemporary concerns, and examine specific events within the context of larger ideas. Dr. Harari also comp...

  4. The evolution and development of cranial form in Homo sapiens

    OpenAIRE

    Lieberman, Daniel E.; McBratney, Brandeis M.; Krovitz, Gail

    2002-01-01

    Despite much data, there is no unanimity over how to define Homo sapiens in the fossil record. Here, we examine cranial variation among Pleistocene and recent human fossils by using a model of cranial growth to identify unique derived features (autapomorphies) that reliably distinguish fossils attributed to “anatomically modern” H. sapiens (AMHS) from those attributed to various taxa of “archaic” Homo spp. (AH) and to test hypotheses about the changes in cranial development that underlie the ...

  5. Water footprint and carbon footprint of the energy consumption in sunflower agroecosystems.

    Science.gov (United States)

    Yousefi, Mohammad; Khoramivafa, Mahmud; Damghani, Abdolmajid Mahdavi

    2017-08-01

    The aims of this study were to assess the energy requirements, carbon footprint, and water footprint of sunflower production in Kermanshah province, western Iran. Data were collected from 70 sunflower production agroecosystems which were selected based on random sampling method in summer 2012. Results indicated that total input and output energy in sunflower production were 26,973.87 and 64,833.92 MJha -1 , respectively. The highest share of total input energy in sunflower agroecosystems was recorded for electricity power, N fertilizer, and diesel fuel with 35, 19, and 17%, respectively. Also, energy use efficiency, water footprint, greenhouse gas (GHG) emission, and carbon footprint were calculated as 2.40, 3.41 m 3  kg -1 , 2042.091 kg CO 2eq ha -1 , and 0.875 kg CO 2eq kg -1 , respectively. 0.18 of sunflower water footprint was related to green water footprint and the remaining 82% was related to blue water footprint. Also, the highest share of carbon footprint was related to electricity power (nearby 80%). Due to the results of this study, reducing use of fossil fuel and non-renewable energy resource and application of sufficient irrigation systems by efficient use of water resource are essential in order to achieve low carbon footprint, environmental challenges, and also sustainability of agricultural production systems.

  6. Dating Of Remains Of Neanderthals And Homo Sapiens From Anatolian Region By ESR-US Combined Methods Preliminary Results

    Directory of Open Access Journals (Sweden)

    Samer Farkh

    2015-08-01

    Full Text Available We tried in the present study to apply the electron spin resonance method ESR combined with uranium-series method US for dating fossilized human teeth and found valuable archaeological sites such as Karain Cave in Anatolia. Karain Cave is a crucial site in a region that has yielded remains of Neanderthals and Homo sapiens our direct ancestors. The dating of these remains allowed us to trace the history since the presence of man on earth. Indeed Anatolia in Turkey is an important region of the world because it represents a passage between Africa the Middle East and Europe. Our study was conducted on faunal teeth found near human remains. The combination of ESR and US data on the teeth provides an understanding of their complex geochemical evolution and get better estimated results. Our samples were taken from the central cutting where geological layers are divided into archaeological horizons each 10 cm. The AH4 horizon of I.3 layer which represents the boundary between the Middle Paleolithic and Upper Paleolithic is dated to 29 4 ka by the ESR-US model. Below two horizons AH6 and AH8 in the same layer I.4 are dated respectively 40 6 and 45 7 ka using the ESR-US model. In layer II where a stalagmite floor was taken we made two U-Th dating at the base and on the top ages oscillated around 120 ka. Since human remains were collected from AH3 horizon for Homo sapiens and AH5 and AH7 horizons for the Neanderthal man so the dates obtained in AH4 AH6 and AH8 represent maximum ages. Thus they provide the disappearance of Neanderthal man between 45 and 40 ka and the appearance of Homo sapiens in 29 ka in Anatolia region. Undoubtedly there is a chronological gap between the Middle and Upper Paleolithic represented by the disappearance of Neanderthals and the appearance of sapiens and none of our results confirm the contemporaneity of these two species in this region.

  7. New fossils from Jebel Irhoud, Morocco and the pan-African origin of Homo sapiens

    OpenAIRE

    Hublin, Jean-Jacques; Ben-Ncer, Abdelouahed; Bailey, Shara E.; Freidline, Sarah E.; Neubauer, Simon; Skinner, Matthew M.; Bergmann, Inga; Le Cabec, Adeline; Benazzi, Stefano; Harvati, Katerina; Gunz, Philipp

    2017-01-01

    Fossil evidence points to an African origin of Homo sapiens from a group called either H. heidelbergensis or H. rhodesiensis. However, the exact place and time of emergence of H. sapiens remain obscure because the fossil record is scarce and the chronological age of many key specimens remains uncertain. In particular, it is unclear whether the present day ‘modern’ morphology rapidly emerged approximately 200 thousand years ago (ka) among earlier representatives of H. sapiens1 or evolved gradu...

  8. Water Footprint Symposium: where next for water footprint and water assessment methodology?

    NARCIS (Netherlands)

    Tillotson, M.R.; Kiu, J.; Guan, D.; Wu, P.; Zhao, Xu; Zhang, Guoping; Pfister, S.; Pahlow, Markus

    2014-01-01

    Recognizing the need for a comprehensive review of the tools and metrics for the quantification and assessment of water footprints, and allowing for the opportunity for open discussion on the challenges and future of water footprinting methodology, an international symposium on water footprint was

  9. Water Footprint Symposium : where next for water footprint and water assessment methodology?

    NARCIS (Netherlands)

    Tillotson, Martin R.; Liu, Junguo; Guan, Dabo; Wu, Pute; Zhao, Xu; Zhang, Guoping; Pfister, Stephan; Pahlow, Markus

    2014-01-01

    Recognizing the need for a comprehensive review of the tools and metrics for the quantification and assessment of water footprints, and allowing for the opportunity for open discussion on the challenges and future of water footprinting methodology, an international symposium on water footprint was

  10. Homo sapiens natriuretic peptide precursor type C (NPPC) mRNA,partial cds and 3' UTR.

    OpenAIRE

    Landi, Stefano; Melaiu, Ombretta; Cabiati, Manuela; Landi, Debora; Caselli, Chiara; Prescimone, Tommaso; Giannessi, Daniela; Gemignani, Federica; Del Ry, Silvia

    2010-01-01

    LOCUS HQ419060 318 bp mRNA linear PRI 24-NOV-2010 DEFINITION Homo sapiens natriuretic peptide precursor type C (NPPC) mRNA, partial cds and 3' UTR. ACCESSION HQ419060 VERSION HQ419060.1 GI:312261407 KEYWORDS . SOURCE Homo sapiens (human) ORGANISM Homo sapiens Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi; Mammalia; Eutheria; Euarchontoglires; Primates; Haplorrhini; Catarrhini; Hominidae; Homo. REFERENCE 1 (bases 1 to 318) AUTHORS Landi,S., Melaiu,O., Cabiati,M., Landi,D., C...

  11. Pleistocene Homo sapiens from Middle Awash, Ethiopia.

    Science.gov (United States)

    White, Tim D; Asfaw, Berhane; DeGusta, David; Gilbert, Henry; Richards, Gary D; Suwa, Gen; Howell, F Clark

    2003-06-12

    The origin of anatomically modern Homo sapiens and the fate of Neanderthals have been fundamental questions in human evolutionary studies for over a century. A key barrier to the resolution of these questions has been the lack of substantial and accurately dated African hominid fossils from between 100,000 and 300,000 years ago. Here we describe fossilized hominid crania from Herto, Middle Awash, Ethiopia, that fill this gap and provide crucial evidence on the location, timing and contextual circumstances of the emergence of Homo sapiens. Radioisotopically dated to between 160,000 and 154,000 years ago, these new fossils predate classic Neanderthals and lack their derived features. The Herto hominids are morphologically and chronologically intermediate between archaic African fossils and later anatomically modern Late Pleistocene humans. They therefore represent the probable immediate ancestors of anatomically modern humans. Their anatomy and antiquity constitute strong evidence of modern-human emergence in Africa.

  12. Dinosaur footprints in the Upper Turonian-Coniacian limestone in the Krnica Bay (NE Istria, Croatia

    Directory of Open Access Journals (Sweden)

    Alenka Mauko

    2003-06-01

    Full Text Available Three isolated footprints and one trackway that can be attributed to bipedal dinosaur, from a limestone bed in vicinity of Požara promontory, Krnica Bay, are described. According to the stratigraphic position the footprints are late Turonian to Coniacian in age.This is the first record of dinosaur remains in the Turonian-Coniacian and the youngest footprint site on the Adriatic-Dinaric Carbonate Platform described thus far.

  13. Ecospaces occupied by Homo erectus and Homo sapiens in insular Southeast Asia in the Pleistocene

    Science.gov (United States)

    Hertler, Christine; Haupt, Susanne; Volmer, Rebekka; Bruch, Angela

    2014-05-01

    Hominins migrated to the islands of the Sunda Shelf multiple times. At least two immigration events are evident, an early immigration of Homo erectus in the late Early Pleistocene and a second immigration of Homo sapiens during the Late Pleistocene. Regional environments changed considerably in the Pleistocene. Expansion patterns among hominins are at least co-determined by their ecologies and environmental change. We examine these expansion patterns on the basis of habitat reconstructions. Mammalian communities provide a geographically extensive record and permit to assess hominin ecospaces. Although chronological resolution is low, they represent the most complete record of habitat changes associated with hominin expansion patterns. In order to reconstruct and compare hominin ecospaces on a quantitative scale, we set up a reference sample consisting of mammalian communities of 117 national parks in South Asia and Sub-Saharan Africa. The diversity of such communities is assessed by ecological profiling of specialized herbivore taxa. Moreover, datasets on climate and vegetation correlate with the diversity structure of such specialized herbivore communities. Reconstructing the diversity structure of communities at key sites in Pleistocene Southeast Asia permits to infer features of the climatic and vegetation framework associated with different hominin taxa. Our results show that Homo erectus and Homo sapiens did not occupy similar ecospaces. The ecospace of Homo erectus is characterized by comparatively low diversity among frugivorous and folivorous taxa, while obligate grazers are part of the assemblages. Specialized herbivore communities with such a diversity structure occur at present in East Africa, while they are absent in Southeast Asia. In the reference sample, this type of ecospace corresponds to seasonal wetlands. Although Homo sapiens still inhabits this type of environment in Southeast Asia, his ecospace is wider. Homo sapiens is associated with

  14. Identification of the ancestral haplotype for apolipoprotein B suggests an African origin of Homo sapiens sapiens and traces their subsequent migration to Europe and the Pacific

    Energy Technology Data Exchange (ETDEWEB)

    Rapacz, J.; Hasler-Rapacz, J.O. (Univ. of Wisconsin, Madison (United States)); Chen, L.; Wu, Mingjiuan; Schumaker, V.N. (Univ. of California, Los Angeles (United States)); Butler-Brunner, E.; Butler, R. (Swiss Red Cross Blood Transfusion Service, Bern (Switzerland))

    1991-02-15

    The probable ancestral haplotype for human apolipoprotein B (apoB) has been identified through immunological analysis of chimpanzee and gorilla serum and sequence analysis of their DNA. Moreover, the frequency of this ancestral apoB haplotype among different human populations provides strong support for the African origin of Homo sapiens sapiens and their subsequent migration from Africa to Europe and to the Pacific. The approach used here for the identification of the ancestral human apoB haplotype is likely to be applicable to many other genes.

  15. Identification of the ancestral haplotype for apolipoprotein B suggests an African origin of Homo sapiens sapiens and traces their subsequent migration to Europe and the Pacific

    International Nuclear Information System (INIS)

    Rapacz, J.; Hasler-Rapacz, J.O.; Chen, L.; Wu, Mingjiuan; Schumaker, V.N.; Butler-Brunner, E.; Butler, R.

    1991-01-01

    The probable ancestral haplotype for human apolipoprotein B (apoB) has been identified through immunological analysis of chimpanzee and gorilla serum and sequence analysis of their DNA. Moreover, the frequency of this ancestral apoB haplotype among different human populations provides strong support for the African origin of Homo sapiens sapiens and their subsequent migration from Africa to Europe and to the Pacific. The approach used here for the identification of the ancestral human apoB haplotype is likely to be applicable to many other genes

  16. Evaluation of Tourism Water Capacity in Agricultural Heritage Sites

    Directory of Open Access Journals (Sweden)

    Mi Tian

    2015-11-01

    Full Text Available Agricultural heritage sites have been gaining popularity as tourism destinations. The arrival of large numbers of tourists, however, has created serious challenges to these vulnerable ecosystems. In particular, water resources are facing tremendous pressure. Thus, an assessment of tourism water footprint is suggested before promoting sustainable tourism. This paper uses the bottom-up approach to construct a framework on the tourism water footprint of agricultural heritage sites. The tourism water footprint consists of four components, namely accommodation water footprint, diet water footprint, transportation water footprint and sewage dilution water footprint. Yuanyang County, a representative of the Honghe Hani rice terraces, was selected as the study area. Field surveys including questionnaires, interviews and participant observation approaches were undertaken to study the tourism water footprint and water capacity of the heritage site. Based on the results, measures to improve the tourism water capacity have been put forward, which should provide references for making policies that aim to maintain a sustainable water system and promote tourism development without hampering the sustainability of the heritage system. The sewage dilution water footprint and the diet water footprint were top contributors to the tourism water footprint of the subject area, taking up 38.33% and 36.15% of the tourism water footprint, respectively, followed by the transportation water footprint (21.47%. The accommodation water footprint had the smallest proportion (4.05%. The tourism water capacity of the heritage site was 14,500 tourists per day. The water pressure index was 97%, indicating that the water footprint was still within the water capacity, but there is a danger that the water footprint may soon exceed the water capacity. As a consequence, we suggest that macro and micro approaches, including appropriate technologies, awareness enhancement and diversified

  17. Progress and Prospects for Tourism Footprint Research

    Directory of Open Access Journals (Sweden)

    Shuxin Wang

    2017-10-01

    Full Text Available The tourism footprint family comprises the tourism ecological footprint (TEF, the tourism carbon footprint (TCF and the tourism water footprint (TWF. The tourism footprint represents an important tool for quantitatively assessing the impact of tourism activities on the ecosystem of a tourist destination. This paper systematically reviews the relevant literature on TEF, TCF and TWF, analyses and summarizes the main progress and failures in the analytical frameworks, research methods, measurement results, environmental impacts and reductions in the tourism footprint. This paper also proposes areas for further developing the tourism footprint research, including unifying the analytical frameworks and boundaries of the tourism footprint, distinguishing the geographical scope of the tourism footprint effectively, improving the process of analyzing the environmental impact of the tourism footprint, measuring the tourism footprint scientifically and roundly, performing space-time calculations of the tourism footprint, and expanding the tourism footprint family by introducing new members. Accordingly, this paper is devoted to the continued study of the tourism footprint.

  18. The history of dinosaur footprint discoveries in Wyoming with emphasis on the Bighorn Basin

    Science.gov (United States)

    Kvale, Erik P.; Mickelson, Debra L.; Hasiotis, Stephen T; Johnson, Gary D.

    2003-01-01

    Dinosaur traces are well known from the western United States in the Colorado Plateau region (Utah, Colorado, New Mexico, and Arizona). Utah contains the greatest abundance of known and documented dinosaur footprints and trackways. Far less well known, however, is the occurrence and distribution of dinosaur footprint-bearing horizons in Wyoming. Scientific studies over the past 10 years have shown that three of the four Middle and Upper Jurassic formations in northern Wyoming contain dinosaur footprints. Two of the footprint-bearing horizons are located in geologic intervals that were once thought to have been deposited in offshore to nearshore marine settings and represent rare North American examples of Middle Jurassic (Bajocian and Bathonian) dinosaur remains. Some of these new Wyoming sites can be correlated to known dinosaur footprint-bearing horizons or intervals in Utah. Wyoming has a great potential for additional discoveries of new dinosaur footprint-bearing horizons, and further prospecting and study is warranted and will ultimately lead to a much better understanding of the geographic distribution and behavior of the potential footprint-makers.

  19. Crystal structure of Homo sapiens protein LOC79017

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Euiyoung; Bingman, Craig A.; Aceti, David J.; Phillips, Jr., George N. (UW)

    2010-02-08

    LOC79017 (MW 21.0 kDa, residues 1-188) was annotated as a hypothetical protein encoded by Homo sapiens chromosome 7 open reading frame 24. It was selected as a target by the Center for Eukaryotic Structural Genomics (CESG) because it did not share more than 30% sequence identity with any protein for which the three-dimensional structure is known. The biological function of the protein has not been established yet. Parts of LOC79017 were identified as members of uncharacterized Pfam families (residues 1-95 as PB006073 and residues 104-180 as PB031696). BLAST searches revealed homologues of LOC79017 in many eukaryotes, but none of them have been functionally characterized. Here, we report the crystal structure of H. sapiens protein LOC79017 (UniGene code Hs.530024, UniProt code O75223, CESG target number go.35223).

  20. Is Homo sapiens polytypic? Human taxonomic diversity and its implications.

    Science.gov (United States)

    Woodley, Michael A

    2010-01-01

    The term race is a traditional synonym for subspecies, however it is frequently asserted that Homo sapiens is monotypic and that what are termed races are nothing more than biological illusions. In this manuscript a case is made for the hypothesis that H. sapiens is polytypic, and in this way is no different from other species exhibiting similar levels of genetic and morphological diversity. First it is demonstrated that the four major definitions of race/subspecies can be shown to be synonymous within the context of the framework of race as a correlation structure of traits. Next the issue of taxonomic classification is considered where it is demonstrated that H. sapiens possesses high levels morphological diversity, genetic heterozygosity and differentiation (F(ST)) compared to many species that are acknowledged to be polytypic with respect to subspecies. Racial variation is then evaluated in light of the phylogenetic species concept, where it is suggested that the least inclusive monophyletic units exist below the level of species within H. sapiens indicating the existence of a number of potential human phylogenetic species; and the biological species concept, where it is determined that racial variation is too small to represent differentiation at the level of biological species. Finally the implications of this are discussed in the context of anthropology where an accurate picture of the sequence and timing of events during the evolution of human taxa are required for a complete picture of human evolution, and medicine, where a greater appreciation of the role played by human taxonomic differences in disease susceptibility and treatment responsiveness will save lives in the future.

  1. Sapiens: Hayvanlar insanar

    OpenAIRE

    Yalı, Sibel

    2018-01-01

    Bu yazıda sizlere satış rekorları kıran bir tarihkitabından bahsetmek istiyorum. Kitap, 2011'de ibranice, 2014'te ingilizceyayımlandı ve şimdiye dek otuz civarında dile çevrildi. “Sapiens: İnsan Türünün Kısa Bir Tarihi” başlığı ile dilimizeçevrilen kitapta insanlık tarihinin serüvenine 70 bin yıllık zaman sürecindenbakılmaya çalışılıyor. Öyle bir kitap ki Amerika Başkanı Obama halkına bukitabı okumasını tavsiye ediyor. Öyle etkili bir kitap ki Facebook’un kurucusuMark Zuckerberg sos...

  2. Evolutionary genetic analyses of MEF2C gene: implications for learning and memory in Homo sapiens.

    Science.gov (United States)

    Kalmady, Sunil V; Venkatasubramanian, Ganesan; Arasappa, Rashmi; Rao, Naren P

    2013-02-01

    MEF2C facilitates context-dependent fear conditioning (CFC) which is a salient aspect of hippocampus-dependent learning and memory. CFC might have played a crucial role in human evolution because of its advantageous influence on survival of species. In this study, we analyzed 23 orthologous mammalian gene sequences of MEF2C gene to examine the evidence for positive selection on this gene in Homo sapiens using Phylogenetic Analysis by Maximum Likelihood (PAML) and HyPhy software. Both PAML Bayes Empirical Bayes (BEB) and HyPhy Fixed Effects Likelihood (FEL) analyses supported significant positive selection on 4 codon sites in H. sapiens. Also, haplotter analysis revealed significant ongoing positive selection on this gene in Central European population. The study findings suggest that adaptive selective pressure on this gene might have influenced human evolution. Further research on this gene might unravel the potential role of this gene in learning and memory as well as its pathogenetic effect in certain hippocampal disorders with evolutionary basis like schizophrenia. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. From Purgatorius ceratops to Homo sapiens - Primate Evolutionary ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 7. From Purgatorius ceratops to Homo sapiens - Primate Evolutionary History. Sindhu Radhakrishna. General Article Volume 11 Issue 7 July 2006 pp 51-60. Fulltext. Click here to view fulltext PDF. Permanent link:

  4. The Homo sapiens 'hemibun': its developmental pattern and the problem of homology.

    Science.gov (United States)

    Nowaczewska, W; Kuźmiński, L

    2009-01-01

    The occipital bun is widely considered a Neanderthal feature. Its homology to the 'hemibun' observed in some European Upper Palaeolithic anatomically modern humans is a current problem. This study quantitatively evaluates the degree of occipital plane convexity in African and Australian modern human crania to analyse a relationship between this feature and some neurocranial variables. Neanderthal and European Upper Palaeolithic Homo sapiens crania were included in the analysis as well. The results of this study indicated that there is a significant relationship between the degree of occipital plane convexity and the following two features in the examined crania of modern humans: the ratio of the maximum neurocranial height to the maximum width of the vault and the ratio of bregma-lambda chord to bregma-lambda arc. The results also revealed that some H. sapiens crania (modern and fossil) show the Neanderthal shape of the occipital plane and that the neurocranial height and shape of parietal midsagittal profile has an influence on occipital plane convexity in the hominins included in this study. This study suggests that the occurrence of the great convexity of the occipital plane in the Neanderthals and H. sapiens is a "by-product" of the relationship between the same neurocranial features and there is no convincing evidence that the Neanderthal occipital bun and the similar structure in H. sapiens develop during ontogeny in the same way.

  5. Water footprint as a tool for integrated water resources management

    Science.gov (United States)

    Aldaya, Maite; Hoekstra, Arjen

    2010-05-01

    In a context where water resources are unevenly distributed and, in some regions precipitation and drought conditions are increasing, enhanced water management is a major challenge to final consumers, businesses, water resource users, water managers and policymakers in general. By linking a large range of sectors and issues, virtual water trade and water footprint analyses provide an appropriate framework to find potential solutions and contribute to a better management of water resources. The water footprint is an indicator of freshwater use that looks not only at direct water use of a consumer or producer, but also at the indirect water use. The water footprint of a product is the volume of freshwater used to produce the product, measured over the full supply chain. It is a multi-dimensional indicator, showing water consumption volumes by source and polluted volumes by type of pollution; all components of a total water footprint are specified geographically and temporally. The water footprint breaks down into three components: the blue (volume of freshwater evaporated from surface or groundwater systems), green (water volume evaporated from rainwater stored in the soil as soil moisture) and grey water footprint (the volume of polluted water associated with the production of goods and services). Closely linked to the concept of water footprint is that of virtual water trade, which represents the amount of water embedded in traded products. Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water productivity. Virtual water trade between nations and even continents could thus be used as an instrument to improve global water use efficiency and to achieve water security in water-poor regions of the world. The virtual water trade

  6. Carbon footprint: current methods of estimation.

    Science.gov (United States)

    Pandey, Divya; Agrawal, Madhoolika; Pandey, Jai Shanker

    2011-07-01

    Increasing greenhouse gaseous concentration in the atmosphere is perturbing the environment to cause grievous global warming and associated consequences. Following the rule that only measurable is manageable, mensuration of greenhouse gas intensiveness of different products, bodies, and processes is going on worldwide, expressed as their carbon footprints. The methodologies for carbon footprint calculations are still evolving and it is emerging as an important tool for greenhouse gas management. The concept of carbon footprinting has permeated and is being commercialized in all the areas of life and economy, but there is little coherence in definitions and calculations of carbon footprints among the studies. There are disagreements in the selection of gases, and the order of emissions to be covered in footprint calculations. Standards of greenhouse gas accounting are the common resources used in footprint calculations, although there is no mandatory provision of footprint verification. Carbon footprinting is intended to be a tool to guide the relevant emission cuts and verifications, its standardization at international level are therefore necessary. Present review describes the prevailing carbon footprinting methods and raises the related issues.

  7. An enigmatic, diminutive theropod footprint in the shallow marine Pliensbachian Hasle Formation, Bornholm, Denmark

    DEFF Research Database (Denmark)

    Milàn, Jesper; Surlyk, Finn

    2015-01-01

    A well-preserved three-toed footprint, measuring 34 mm in length from a very small predatory dinosaur with an estimated hip height of 153 mm and a total body length around 50 cm including tail, is reported from the type section of the marine Lower Jurassic (Pliensbachian), Hasle Formation...... on the Danish island of Bornholm in the Baltic Sea. The morphology of the footprint is similar to the ichnogenus Stenonyx Lull 1904 from the contemporaneous Pliensbachian Szydlowek site in Poland. Apart from the Polish material, footprints from diminutive dinosaurs are rare and reported from few other...... localities around the world. The occurrence of a diminutive dinosaur footprint in a shallow marine sandstone is enigmatic. The well-defined morphology of the footprint, together with the very small size of the trackmaker, excludes the possibility that the track was emplaced by a swimming or wading animal...

  8. The Lake Ndutu cranium and early Homo sapiens in Africa.

    Science.gov (United States)

    Rightmire, G P

    1983-06-01

    The partial cranium from Lake Ndutu, near Olduvai Gorge in northern Tanzania, has generally been viewed as Homo erectus, although points of similarity to H. sapiens have also been recognized. Bones of the vault are in fact quite thick, and the cranium is small. Length and breadth dimensions are comparable to those of earlier H. erectus from Koobi Fora and Ileret, and the Ndutu individual is more similar in size to O.H. 12 than to O.H. 9. Unfortunately, the facial skeleton and frontal bone are very incomplete, and little useful information can be obtained from these parts of the existing reconstruction. The parietals are also damaged, but the left temporal is more satisfactorily preserved, and the occiput is nearly complete. Occipital morphology, mastoid shape, and characteristics of the glenoid cavity and tympanic plate probably provide the best available guide to affinities of the Ndutu hominid. In many of these features the cranium resembles Broken Hill, Elandsfontein, and other African fossils referred to archaic H. sapiens. There are some similarities to modern humans also, but no ties to the Neanderthals of Europe. Allocation of Ndutu to an African subspecies of H. sapiens seems most appropriate, even if the pattern of relationships between such archaic populations and recent humans is still unclear.

  9. The Footprint Database and Web Services of the Herschel Space Observatory

    Science.gov (United States)

    Dobos, László; Varga-Verebélyi, Erika; Verdugo, Eva; Teyssier, David; Exter, Katrina; Valtchanov, Ivan; Budavári, Tamás; Kiss, Csaba

    2016-10-01

    Data from the Herschel Space Observatory is freely available to the public but no uniformly processed catalogue of the observations has been published so far. To date, the Herschel Science Archive does not contain the exact sky coverage (footprint) of individual observations and supports search for measurements based on bounding circles only. Drawing on previous experience in implementing footprint databases, we built the Herschel Footprint Database and Web Services for the Herschel Space Observatory to provide efficient search capabilities for typical astronomical queries. The database was designed with the following main goals in mind: (a) provide a unified data model for meta-data of all instruments and observational modes, (b) quickly find observations covering a selected object and its neighbourhood, (c) quickly find every observation in a larger area of the sky, (d) allow for finding solar system objects crossing observation fields. As a first step, we developed a unified data model of observations of all three Herschel instruments for all pointing and instrument modes. Then, using telescope pointing information and observational meta-data, we compiled a database of footprints. As opposed to methods using pixellation of the sphere, we represent sky coverage in an exact geometric form allowing for precise area calculations. For easier handling of Herschel observation footprints with rather complex shapes, two algorithms were implemented to reduce the outline. Furthermore, a new visualisation tool to plot footprints with various spherical projections was developed. Indexing of the footprints using Hierarchical Triangular Mesh makes it possible to quickly find observations based on sky coverage, time and meta-data. The database is accessible via a web site http://herschel.vo.elte.hu and also as a set of REST web service functions, which makes it readily usable from programming environments such as Python or IDL. The web service allows downloading footprint data

  10. Forearm articular proportions and the antebrachial index in Homo sapiens, Australopithecus afarensis and the great apes.

    Science.gov (United States)

    Williams, Frank L'Engle; Cunningham, Deborah L; Amaral, Lia Q

    2015-12-01

    When hominin bipedality evolved, the forearms were free to adopt nonlocomotor tasks which may have resulted in changes to the articular surfaces of the ulna and the relative lengths of the forearm bones. Similarly, sex differences in forearm proportions may be more likely to emerge in bipeds than in the great apes given the locomotor constraints in Gorilla, Pan and Pongo. To test these assumptions, ulnar articular proportions and the antebrachial index (radius length/ulna length) in Homo sapiens (n=51), Gorilla gorilla (n=88), Pan troglodytes (n=49), Pongo pygmaeus (n=36) and Australopithecus afarensis A.L. 288-1 and A.L. 438-1 are compared. Intercept-adjusted ratios are used to control for size and minimize the effects of allometry. Canonical scores axes show that the proximally broad and elongated trochlear notch with respect to size in H. sapiens and A. afarensis is largely distinct from G. gorilla, P. troglodytes and P. pygmaeus. A cluster analysis of scaled ulnar articular dimensions groups H. sapiens males with A.L. 438-1 ulna length estimates, while one A.L. 288-1 ulna length estimate groups with Pan and another clusters most closely with H. sapiens, G. gorilla and A.L. 438-1. The relatively low antebrachial index characterizing H. sapiens and non-outlier estimates of A.L. 288-1 and A.L. 438-1 differs from those of the great apes. Unique sex differences in H. sapiens suggest a link between bipedality and forearm functional morphology. Copyright © 2015 Elsevier GmbH. All rights reserved.

  11. Standing footprint diagnostic method

    Science.gov (United States)

    Fan, Y. F.; Fan, Y. B.; Li, Z. Y.; Newman, T.; Lv, C. S.; Fan, Y. Z.

    2013-10-01

    Center of pressure is commonly used to evaluate standing balance. Even though it is incomplete, no better evaluation method has been presented. We designed our experiment with three standing postures: standing with feet together, standing with feet shoulder width apart, and standing with feet slightly wider than shoulder width. Our platform-based pressure system collected the instantaneous plantar pressure (standing footprint). A physical quantity of instantaneous standing footprint principal axis was defined, and it was used to construct an index to evaluate standing balance. Comparison between results from our newly established index and those from the center of pressure index to evaluate the stability of different standing postures revealed that the standing footprint principal axis index could better respond to the standing posture change than the existing one. Analysis indicated that the insensitive response to the relative position between feet and to the standing posture change from the center of pressure could be better detected by the standing footprint principal axis index. This predicts a wide application of standing footprint principal axis index when evaluating standing balance.

  12. Fast Fenton footprinting: a laboratory-based method for the time-resolved analysis of DNA, RNA and proteins

    Science.gov (United States)

    Shcherbakova, Inna; Mitra, Somdeb; Beer, Robert H.; Brenowitz, Michael

    2006-01-01

    ‘Footprinting’ describes assays in which ligand binding or structure formation protects polymers such as nucleic acids and proteins from either cleavage or modification; footprinting allows the accessibility of individual residues to be mapped in solution. Equilibrium and time-dependent footprinting links site-specific structural information with thermodynamic and kinetic transitions. The hydroxyl radical (·OH) is a particularly valuable footprinting probe by virtue of it being among the most reactive of chemical oxidants; it reports the solvent accessibility of reactive sites on macromolecules with as fine as a single residue resolution. A novel method of millisecond time-resolved ·OH footprinting has been developed based on the Fenton reaction, Fe(II) + H2O2 → Fe(III) + ·OH + OH−. This method can be implemented in laboratories using widely available three-syringe quench flow mixers and inexpensive reagents to study local changes in the solvent accessibility of DNA, RNA and proteins associated with their biological function. PMID:16582097

  13. A Comprehensive Exploration of Java Man: Bio-Cultural Evolution from Homo erectus to Homo sapiens

    Directory of Open Access Journals (Sweden)

    Samuel J Haryono

    2017-02-01

    An overlap of time period between Homo erectus and Homo sapiens has not been confirmed. In the history of man, there have been two missing links: one between man and ape, and one between progressive Homo erectus and archaic Homo sapiens.  Specimen dating on Java Man has been discrepant among research groups, and the use of molecular biology in ancient specimens has been a novelty. This study intends to use fossilised specimens, to harvest DNA to be sequenced for ribosomal DNA analysis for comparative phylogeny among ancient and modern man and other hominids. Dental calculus will be analysed to identify starch, carbohydrate, and protein to illustrate paleo dietary pattern. Soil samples will be examined for pollen and phytoliths to elaborate on ancient ecosystem. Blood samples will be procured from indigenous people along the riverflow region of Bengawan Solo to analyse modern human DNA. We hope that we may reconstruct the evolution pathway, construct the phylogenetic tree between ancient and modern hominids, and discover the uniqueness of Homo sapiens sapiens. Keywords: Java Man, Ribosomal DNA, Hominid Phylogenetic,

  14. Stringent DDI-based prediction of H. sapiens-M. tuberculosis H37Rv protein-protein interactions.

    Science.gov (United States)

    Zhou, Hufeng; Rezaei, Javad; Hugo, Willy; Gao, Shangzhi; Jin, Jingjing; Fan, Mengyuan; Yong, Chern-Han; Wozniak, Michal; Wong, Limsoon

    2013-01-01

    H. sapiens-M. tuberculosis H37Rv protein-protein interaction (PPI) data are very important information to illuminate the infection mechanism of M. tuberculosis H37Rv. But current H. sapiens-M. tuberculosis H37Rv PPI data are very scarce. This seriously limits the study of the interaction between this important pathogen and its host H. sapiens. Computational prediction of H. sapiens-M. tuberculosis H37Rv PPIs is an important strategy to fill in the gap. Domain-domain interaction (DDI) based prediction is one of the frequently used computational approaches in predicting both intra-species and inter-species PPIs. However, the performance of DDI-based host-pathogen PPI prediction has been rather limited. We develop a stringent DDI-based prediction approach with emphasis on (i) differences between the specific domain sequences on annotated regions of proteins under the same domain ID and (ii) calculation of the interaction strength of predicted PPIs based on the interacting residues in their interaction interfaces. We compare our stringent DDI-based approach to a conventional DDI-based approach for predicting PPIs based on gold standard intra-species PPIs and coherent informative Gene Ontology terms assessment. The assessment results show that our stringent DDI-based approach achieves much better performance in predicting PPIs than the conventional approach. Using our stringent DDI-based approach, we have predicted a small set of reliable H. sapiens-M. tuberculosis H37Rv PPIs which could be very useful for a variety of related studies. We also analyze the H. sapiens-M. tuberculosis H37Rv PPIs predicted by our stringent DDI-based approach using cellular compartment distribution analysis, functional category enrichment analysis and pathway enrichment analysis. The analyses support the validity of our prediction result. Also, based on an analysis of the H. sapiens-M. tuberculosis H37Rv PPI network predicted by our stringent DDI-based approach, we have discovered some

  15. Universal internucleotide statistics in full genomes: a footprint of the DNA structure and packaging?

    Directory of Open Access Journals (Sweden)

    Mikhail I Bogachev

    Full Text Available Uncovering the fundamental laws that govern the complex DNA structural organization remains challenging and is largely based upon reconstructions from the primary nucleotide sequences. Here we investigate the distributions of the internucleotide intervals and their persistence properties in complete genomes of various organisms from Archaea and Bacteria to H. Sapiens aiming to reveal the manifestation of the universal DNA architecture. We find that in all considered organisms the internucleotide interval distributions exhibit the same [Formula: see text]-exponential form. While in prokaryotes a single [Formula: see text]-exponential function makes the best fit, in eukaryotes the PDF contains additionally a second [Formula: see text]-exponential, which in the human genome makes a perfect approximation over nearly 10 decades. We suggest that this functional form is a footprint of the heterogeneous DNA structure, where the first [Formula: see text]-exponential reflects the universal helical pitch that appears both in pro- and eukaryotic DNA, while the second [Formula: see text]-exponential is a specific marker of the large-scale eukaryotic DNA organization.

  16. Taiwan’s Ecological Footprint (1994–2011

    Directory of Open Access Journals (Sweden)

    Yung-Jaan Lee

    2014-09-01

    Full Text Available According to the 2011 edition of the National Footprint Accounts (NFA published by the Global Footprint Network (GFN, humankind consumed the resources and services of 1.5 planets in 2008; the corresponding number in 1961 was 0.7 planets. North Americans have an ecological footprint of 8.7 global hectares per person whereas Africans have a footprint of only 1.4 global hectares per person. The global mean biological capacity is only 1.8 global hectares per person so human beings are overshooting ecological resources. The ecological footprint measures the resources that are consumed by humans from the biosphere, and serves as an index of the sustainability of development. The NFA includes the ecological footprints of over 200 countries and regions, but not Taiwan. Hence, Taiwan must establish and update its own ecological footprint databases. Ecological footprint is one indicator of the sustainability of development, and can be compared across nations. This study extends previous studies by analyzing Taiwan’s ecological footprint from 2008–2011. With reference to the ecological footprint accounts of the Global Footprint Network and the Taiwan’s ecological footprint analysis for 1997–2007, this study presents Taiwan’s ecological footprint from 2008–2011. Most of the data that are used herein are taken from the Food and Agriculture Organization, the International Energy Agency, Taiwan’s Council of Agriculture and Taiwan’s National Development Council. The results thus obtained reveal that Taiwan’s ecological footprint from 2008–2011 exceeded that from 1997–2007. To respond to this trend toward un-sustainable development and to help Taiwan move toward sustainability, carbon reduction and energy saving policies should be implemented to effectively manage Taiwan’s ecological resources.

  17. Land, carbon and water footprints in Taiwan

    International Nuclear Information System (INIS)

    Lee, Yung-Jaan

    2015-01-01

    The consumer responsibility approach uses footprints as indicators of the total direct and indirect effects of a product or consumption activity. This study used a time-series analysis of three environmental pressures to quantify the total environmental pressures caused by consumption in Taiwan: land footprint, carbon footprint, and water footprint. Land footprint is the pressure from appropriation of biologically productive land and water area. Carbon footprint is the pressure from greenhouse gas emissions. Water footprint is the pressure from freshwater consumption. Conventional carbon footprint is the total CO 2 emitted by a certain activity or the CO 2 accumulation during a product life cycle. This definition cannot be used to convert CO 2 emissions into land units. This study responds to the needs of “CO 2 land” in the footprint family by applying the carbon footprint concept used by GFN. The analytical results showed that consumption by the average Taiwan citizen in 2000 required appropriation of 5.39 gha (hectares of land with global-average biological productivity) and 3.63 gha in 2011 in terms of land footprint. The average Taiwan citizen had a carbon footprint of 3.95 gha in 2000 and 5.94 gha in 2011. These results indicate that separately analyzing the land and carbon footprints enables their trends to be compared and appropriate policies and strategies for different sectors to be proposed accordingly. The average Taiwan citizen had a blue water footprint of 801 m 3 in 2000 and 784 m 3 in 2011. By comparison, their respective global averages were 1.23 gha, 2.36 gha and 163 m 3 blue water in 2011, respectively. Overall, Taiwan revealed higher environmental pressures compared to the rest of the world, demonstrating that Taiwan has become a high footprint state and has appropriated environmental resources from other countries. That is, through its imports of products with embodied pressures and its exports, Taiwan has transferred the environmental

  18. Land, carbon and water footprints in Taiwan

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yung-Jaan, E-mail: yungjaanlee@gmail.com

    2015-09-15

    The consumer responsibility approach uses footprints as indicators of the total direct and indirect effects of a product or consumption activity. This study used a time-series analysis of three environmental pressures to quantify the total environmental pressures caused by consumption in Taiwan: land footprint, carbon footprint, and water footprint. Land footprint is the pressure from appropriation of biologically productive land and water area. Carbon footprint is the pressure from greenhouse gas emissions. Water footprint is the pressure from freshwater consumption. Conventional carbon footprint is the total CO{sub 2} emitted by a certain activity or the CO{sub 2} accumulation during a product life cycle. This definition cannot be used to convert CO{sub 2} emissions into land units. This study responds to the needs of “CO{sub 2} land” in the footprint family by applying the carbon footprint concept used by GFN. The analytical results showed that consumption by the average Taiwan citizen in 2000 required appropriation of 5.39 gha (hectares of land with global-average biological productivity) and 3.63 gha in 2011 in terms of land footprint. The average Taiwan citizen had a carbon footprint of 3.95 gha in 2000 and 5.94 gha in 2011. These results indicate that separately analyzing the land and carbon footprints enables their trends to be compared and appropriate policies and strategies for different sectors to be proposed accordingly. The average Taiwan citizen had a blue water footprint of 801 m{sup 3} in 2000 and 784 m{sup 3} in 2011. By comparison, their respective global averages were 1.23 gha, 2.36 gha and 163 m{sup 3} blue water in 2011, respectively. Overall, Taiwan revealed higher environmental pressures compared to the rest of the world, demonstrating that Taiwan has become a high footprint state and has appropriated environmental resources from other countries. That is, through its imports of products with embodied pressures and its exports, Taiwan has

  19. Transfemoral implantation of an Edwards SAPIEN valve in a tricuspid bioprosthesis without fluoroscopic landmarks.

    Science.gov (United States)

    Calvert, Patrick A; Himbert, Dominique; Brochet, Eric; Radu, Costin; Iung, Bernard; Hvass, Ulrik; Darondel, Jean-Marc; Depoix, Jean-Pol; Nataf, Patrick; Vahanian, Alec

    2012-03-01

    We describe the first report of an Edwards SAPIEN valve implanted in a tricuspid bioprosthesis from the femoral vein. We highlight the feasibility of this previously avoided approach and the techniques involved. A 61-year-old woman with multiple valve replacements for rheumatic heart disease presented with NHYA IV dyspnoea secondary to a severely stenosed tricuspid bioprosthesis. After failed aggressive medical therapy and surgical turn down, an Edwards SAPIEN XT valve was deployed in the tricuspid bioprosthesis via the right femoral vein. Adaptations to the standard transfemoral transcatheter aortic valve implantation (TAVI) technique included: (1) crossing the tricuspid bioprosthesis with a balloon floatation catheter; (2) temporary pacing wire in the coronary sinus rather than the right ventricle; (3) mounting of the SAPIEN XT valve in the reverse orientation to transfemoral TAVI; and (4) fine positioning of the final valve position pre-deployment by 3D transoesophageal echocardiography (3D TOE) alone due to complete radiolucency of the tricuspid bioprosthesis. The procedure was completed without complication and resulted in significant symptomatic improvement. Deployment of an Edwards SAPIEN valve in a tricuspid bioprosthesis via the femoral vein is feasible and, with careful adaptations to established TAVI techniques, can be performed without complications and with good clinical response.

  20. Carbon Footprints

    OpenAIRE

    Rahel Aichele; Gabriel Felbermayr

    2011-01-01

    Lässt sich der Beitrag eines Landes zum weltweiten Klimaschutz an der Veränderung seines CO2-Ausstoßes messen, wie es im Kyoto-Abkommen implizit unterstellt wird? Oder ist aufgrund der Bedeutung des internationalen Güterhandels der Carbon Footprint – der alle CO2-Emissionen erfasst, die durch die Absorption (d.h. Konsum und Investitionen) eines Landes entstehen – das bessere Maß? Die Autoren erstellen eine Datenbank mit den Footprints von 40 Ländern für den Zeitraum 1995–2007. Die deskriptive...

  1. Bone strength and athletic ability in hominids: Ardipithecus ramidus to Homo sapiens

    Science.gov (United States)

    Lee, S. A.

    2013-03-01

    The ability of the femur to resist bending stresses is determined by its midlength cross-sectional geometry, its length and the elastic properties of the mineral part of the bone. The animal's athletic ability, determined by a ``bone strength index,'' is limited by this femoral bending strength in relation to the loads on the femur. This analysis is applied to the fossil record for Homo sapiens, Homo neanderthalensis, Homo erectus, Homo habilis, Australopithecus afarensis and Ardipithecus ramidus. Evidence that the femoral bone strength index of modern Homo sapiens has weakened over the last 50,000 years is found.

  2. The Water Footprint of Food Aid

    Directory of Open Access Journals (Sweden)

    Nicole Jackson

    2015-05-01

    Full Text Available Food aid is a critical component of the global food system, particularly when emergency situations arise. For the first time, we evaluate the water footprint of food aid. To do this, we draw on food aid data from theWorld Food Programme and virtual water content estimates from WaterStat. We find that the total water footprint of food aid was 10 km3 in 2005, which represents approximately 0.5% of the water footprint of food trade and 2.0% of the water footprint of land grabbing (i.e., water appropriation associated with large agricultural land deals. The United States is by far the largest food aid donor and contributes 82% of the water footprint of food aid. The countries that receive the most water embodied in aid are Ethiopia, Sudan, North Korea, Bangladesh and Afghanistan. Notably, we find that there is significant overlap between countries that receive food aid and those that have their land grabbed. Multivariate regression results indicate that donor water footprints are driven by political and environmental variables, whereas recipient water footprints are driven by land grabbing and food indicators.

  3. In Cell Footprinting Coupled with Mass Spectrometry for the Structural Analysis of Proteins in Live Cells.

    Science.gov (United States)

    Espino, Jessica A; Mali, Vishaal S; Jones, Lisa M

    2015-08-04

    Protein footprinting coupled with mass spectrometry has become a widely used tool for the study of protein-protein and protein-ligand interactions and protein conformational change. These methods provide residue-level analysis on protein interaction sites and have been successful in studying proteins in vitro. The extension of these methods for in cell footprinting would open an avenue to study proteins that are not amenable for in vitro studies and would probe proteins in their native environment. Here we describe the application of an oxidative-based footprinting approach inside cells in which hydroxyl radicals are used to oxidatively modify proteins. Mass spectrometry is used to detect modification sites and to calculate modification levels. The method is probing biologically relevant proteins in live cells, and proteins in various cellular compartments can be oxdiatively modified. Several different amino acid residues are modified making the method a general labeling strategy for the study of a variety of proteins. Further, comparison of the extent of oxidative modification with solvent accessible surface area reveals the method successfully probes solvent accessibility. This marks the first time protein footprinting has been performed in live cells.

  4. Casting Footprints for Eternity

    Science.gov (United States)

    1999-01-01

    Apollo 11 Astronaut Buzz Aldrin has his footprints casted during the dedication ceremony of the rocket fountain at Building 4200 at Marshall Space Flight Center. The casts of Aldrin's footprints will be placed in the newly constructed Von Braun courtyard representing the accomplishments of the Apollo 11 lunar landing.

  5. Dental size reduction in Indonesian Homo erectus: Implications for the PU-198 premolar and the appearance of Homo sapiens on Java.

    Science.gov (United States)

    Polanski, Joshua M; Marsh, Hannah E; Maddux, Scott D

    2016-01-01

    The recent recovery of a hominin maxillary third premolar, PU-198, within the faunal collections from Punung Cave (East Java) has led to assertions that Homo sapiens appeared on Java between 143,000 and 115,000 years ago. The taxonomic assignment of PU-198 to H. sapiens was based predominantly on the small size of the specimen, following an analysis which found little to no overlap in premolar size between Homo erectus and terminal Pleistocene/Holocene H. sapiens. Here, we re-evaluate the use of size in the taxonomic assignment of PU-198 in light of 1) new buccolingual and mesiodistal measurements taken on the fossil, 2) comparisons to a larger sample of H. erectus and H. sapiens maxillary third premolars, and 3) evidence of a diachronic trend in post-canine dental size reduction among Javan H. erectus. Our results demonstrate PU-198 to be slightly larger than previously suggested, reveal substantial overlap in premolar size between H. erectus and H. sapiens, and indicate a statistically significant reduction in premolar size between early and late Javan H. erectus. Our findings cast doubt on the assignment of PU-198 to H. sapiens, and accordingly, question the appearance of H. sapiens on Java between 143,000 and 115,000 years ago. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. A better carbon footprint label

    DEFF Research Database (Denmark)

    Thøgersen, John; Nielsen, Kristian S.

    2016-01-01

    , participants saw the original Carbon Trust label and in the other condition they saw the same label, but with traffic light colors added to communicate the product’s relative performance in terms of carbon footprint. All included attributes were found to have a significant impact on consumer choices....... As expected, price and carbon footprint were negatively related to choice. Further, participants preferred organic to non-organic coffee and certification by a public authority. The effect of the carbon label is significantly stronger the more environmentally concerned the consumer is. Using colors...... to indicate relative carbon footprint significantly increases carbon label effectiveness. Hence, a carbon footprint label is more effective if it uses traffic light colors to communicate the product’s relative performance....

  7. Simulations of seismic acquisition footprint

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.; Margrave, G.; Lawton, D. [Calgary Univ., AB (Canada)

    2008-07-01

    Numerical simulations were performed to investigate the causes of commonly observed artefacts in seismic field data. These seismic acquisition footprints typically consist of modulations in recorded amplitudes that are spatially correlated to the surface locations of sources and receivers used in a survey. Two broad classes of footprint were considered, notably amplitude variations related to the edges of the survey and the amplitude variations in the interior of the survey. The variations in amplitude obscure the true reflection response of the subsurface. The MATLAB numerical modelling code was used to produce the synthetic seismic data and create a thorough dataset using a survey design incorporating dense grids of sources and receivers. The footprint consisting of periodic amplitude variations in the interior of the surveys, similar to that observed in field data and likely produced by poor sampling, was observed in the decimated dataset. This type of footprint varied in strength between images produced with different processing algorithms. The observed footprint in these simulations was most organized in the unmigrated stack and was somewhat randomized after poststack. 2 refs., 1 tab., 3 figs.

  8. AgSat Imagery Collection Footprints

    Data.gov (United States)

    Farm Service Agency, Department of Agriculture — The AgSat Imagery Collection Footprints map shows the imagery footprints which have been collected under the USDA satellite blanket purchase agreement. Click on a...

  9. Genetic, physiologic and ecogeographic factors contributing to variation in Homo sapiens: Homo floresiensis reconsidered.

    Science.gov (United States)

    Richards, Gary D

    2006-11-01

    A new species, Homo floresiensis, was recently named for Pleistocene hominid remains on Flores, Indonesia. Significant controversy has arisen regarding this species. To address controversial issues and refocus investigations, I examine the affinities of these remains with Homo sapiens. Clarification of problematic issues is sought through an integration of genetic and physiological data on brain ontogeny and evolution. Clarification of the taxonomic value of various 'primitive' traits is possible given these data. Based on this evidence and using a H. sapiens morphological template, models are developed to account for the combination of features displayed in the Flores fossils. Given this overview, I find substantial support for the hypothesis that the remains represent a variant of H. sapiens possessing a combined growth hormone-insulin-like growth factor I axis modification and mutation of the MCPH gene family. Further work will be required to determine the extent to which this variant characterized the population.

  10. The dispersal of Homo sapiens across southern Asia: how early, how often, how complex?

    Science.gov (United States)

    Dennell, Robin; Petraglia, Michael D.

    2012-07-01

    The timing and the paths of colonization of southern Asia by Homo sapiens are poorly known, though many population geneticists, paleoanthropologists, and archaeologists have contended that this process began with dispersal from East Africa, and occurred between 60,000 and 40,000 years ago. However, the evidence for this scenario is very weak, particularly the lack of human skeletal evidence between the Levant and Borneo before 40 ka, and other explanations are possible. Here we argue that environmental and archaeological information is increasingly indicating the likelihood that H. sapiens exited Africa much earlier than commonly thought, and may have colonized much of southern Asia well before 60,000 years ago. Additionally, we cannot exclude the possibility that several dispersal events occurred, from both North and East Africa, nor the likelihood that early populations of H. sapiens in southern Asia interbred with indigenous populations of Neanderthals, Denisovans and Homo erectus. The population history of southern Asia during the Upper Pleistocene is likely far more complex than currently envisaged.

  11. The Arrival of Homo sapiens into the Southern Cone at 14,000 Years Ago.

    Science.gov (United States)

    Politis, Gustavo G; Gutiérrez, María A; Rafuse, Daniel J; Blasi, Adriana

    The Arroyo Seco 2 site contains a rich archaeological record, exceptional for South America, to explain the expansion of Homo sapiens into the Americas and their interaction with extinct Pleistocene mammals. The following paper provides a detailed overview of material remains found in the earliest cultural episodes at this multi-component site, dated between ca. 12,170 14C yrs B.P. (ca. 14,064 cal yrs B.P.) and 11,180 14C yrs B.P. (ca. 13,068 cal yrs B.P.). Evidence of early occupations includes the presence of lithic tools, a concentration of Pleistocene species remains, human-induced fractured animal bones, and a selection of skeletal parts of extinct fauna. The occurrence of hunter-gatherers in the Southern Cone at ca. 14,000 cal yrs B.P. is added to the growing list of American sites that indicate a human occupation earlier than the Clovis dispersal episode, but posterior to the onset of the deglaciation of the Last Glacial Maximum (LGM) in the North America.

  12. The Arrival of Homo sapiens into the Southern Cone at 14,000 Years Ago.

    Directory of Open Access Journals (Sweden)

    Gustavo G Politis

    Full Text Available The Arroyo Seco 2 site contains a rich archaeological record, exceptional for South America, to explain the expansion of Homo sapiens into the Americas and their interaction with extinct Pleistocene mammals. The following paper provides a detailed overview of material remains found in the earliest cultural episodes at this multi-component site, dated between ca. 12,170 14C yrs B.P. (ca. 14,064 cal yrs B.P. and 11,180 14C yrs B.P. (ca. 13,068 cal yrs B.P.. Evidence of early occupations includes the presence of lithic tools, a concentration of Pleistocene species remains, human-induced fractured animal bones, and a selection of skeletal parts of extinct fauna. The occurrence of hunter-gatherers in the Southern Cone at ca. 14,000 cal yrs B.P. is added to the growing list of American sites that indicate a human occupation earlier than the Clovis dispersal episode, but posterior to the onset of the deglaciation of the Last Glacial Maximum (LGM in the North America.

  13. Mandibular ramus shape variation and ontogeny in Homo sapiens and Homo neanderthalensis.

    Science.gov (United States)

    Terhune, Claire E; Ritzman, Terrence B; Robinson, Chris A

    2018-04-27

    As the interface between the mandible and cranium, the mandibular ramus is functionally significant and its morphology has been suggested to be informative for taxonomic and phylogenetic analyses. In primates, and particularly in great apes and humans, ramus morphology is highly variable, especially in the shape of the coronoid process and the relationship of the ramus to the alveolar margin. Here we compare ramus shape variation through ontogeny in Homo neanderthalensis to that of modern and fossil Homo sapiens using geometric morphometric analyses of two-dimensional semilandmarks and univariate measurements of ramus angulation and relative coronoid and condyle height. Results suggest that ramus, especially coronoid, morphology varies within and among subadult and adult modern human populations, with the Alaskan Inuit being particularly distinct. We also identify significant differences in overall anterosuperior ramus and coronoid shapes between H. sapiens and H. neanderthalensis, both in adults and throughout ontogeny. These shape differences are subtle, however, and we therefore suggest caution when using ramus morphology to diagnose group membership for individual specimens of these taxa. Furthermore, we argue that these morphologies are unlikely to be representative of differences in masticatory biomechanics and/or paramasticatory behaviors between Neanderthals and modern humans, as has been suggested by previous authors. Assessments of ontogenetic patterns of shape change reveal that the typical Neanderthal ramus morphology is established early in ontogeny, and there is little evidence for divergent postnatal ontogenetic allometric trajectories between Neanderthals and modern humans as a whole. This analysis informs our understanding of intraspecific patterns of mandibular shape variation and ontogeny in H. sapiens and can shed further light on overall developmental and life history differences between H. sapiens and H. neanderthalensis. Copyright

  14. One-year multicentre outcomes of transapical aortic valve implantation using the SAPIEN XT™ valve: the PREVAIL transapical study.

    Science.gov (United States)

    Walther, Thomas; Thielmann, Matthias; Kempfert, Joerg; Schroefel, Holger; Wimmer-Greinecker, Gerhard; Treede, Hendrik; Wahlers, Thorsten; Wendler, Olaf

    2013-05-01

    The study aimed to evaluate 1-year outcomes of the multicentre PREVAIL transapical (TA) study of TA-aortic valve implantation (AVI) in high-risk patients. From September 2009 to August 2010, a total of 150 patients, aged 81.6 ± 5.8 years, 40.7% female, were included at 12 European TA-AVI experienced sites. Patients received 23 (n = 36), 26 (n = 57) and 29 mm (n = 57) second-generation SAPIEN XT™ (Edwards Lifesciences, Irvine, CA, USA) valves. The mean logistic EuroSCORE was 24.3 ± 7.0, and mean Society Thoracic Surgeons score was 7.5 ± 4.4%. Survival was 91.3% at 30 days and 77.9% at 1 year. Subgroup analysis revealed survivals of 91.7/88.9, 86.0/70.2, 96.55/91.2% for patients receiving 23-, 26- and 29-mm valves at 30 days and at 1 year, respectively. Transthoracic echocardiography revealed preserved left ventricular ejection fraction and low gradients. Aortic incompetence was none in 41/48, trace 30/36, mild 22/12 and moderate in 7/4% at discharge and 1 year. Walking distance increased from 221 (postimplant) to 284 m (at 1 year, P = 0.0004). Three patients required reoperation due to increasing aortic incompetence during follow-up. Causes of mortality at 1 year were cardiac (n = 7), stroke (n = 1) and others (n = 5). The European PREVAIL multicentre trial demonstrates good functionality and good outcomes for TA-AVI using the second-generation SAPIEN XT prosthesis and the ASCENDRA-II delivery system. The 29-mm SAPIEN XT valve was successfully introduced and showed excellent results.

  15. Localized conformational interrogation of antibody and antibody-drug conjugates by site-specific carboxyl group footprinting.

    Science.gov (United States)

    Pan, Lucy Yan; Salas-Solano, Oscar; Valliere-Douglass, John F

    Establishing and maintaining conformational integrity of monoclonal antibodies (mAbs) and antibody-drug conjugates (ADCs) during development and manufacturing is critical for ensuring their clinical efficacy. As presented here, we applied site-specific carboxyl group footprinting (CGF) for localized conformational interrogation of mAbs. The approach relies on covalent labeling that introduces glycine ethyl ester tags onto solvent-accessible side chains of protein carboxylates. Peptide mapping is used to monitor the labeling kinetics of carboxyl residues and the labeling kinetics reflects the conformation or solvent-accessibility of side chains. Our results for two case studies are shown here. The first study was aimed at defining the conformational changes of mAbs induced by deglycosylation. We found that two residues in C H 2 domain (D268 and E297) show significantly enhanced side chain accessibility upon deglycosylation. This site-specific result highlighted the advantage of monitoring the labeling kinetics at the amino acid level as opposed to the peptide level, which would result in averaging out of highly localized conformational differences. The second study was designed to assess conformational effects brought on by conjugation of mAbs with drug-linkers. All 59 monitored carboxyl residues displayed similar solvent-accessibility between the ADC and mAb under native conditions, which suggests the ADC and mAb share similar side chain conformation. The findings are well correlated and complementary with results from other assays. This work illustrated that site-specific CGF is capable of pinpointing local conformational changes in mAbs or ADCs that might arise during development and manufacturing. The methodology can be readily implemented within the industry to provide comprehensive conformational assessment of these molecules.

  16. Similarity analysis between chromosomes of Homo sapiens and monkeys with correlation coefficient, rank correlation coefficient and cosine similarity measures.

    Science.gov (United States)

    Someswara Rao, Chinta; Viswanadha Raju, S

    2016-03-01

    In this paper, we consider correlation coefficient, rank correlation coefficient and cosine similarity measures for evaluating similarity between Homo sapiens and monkeys. We used DNA chromosomes of genome wide genes to determine the correlation between the chromosomal content and evolutionary relationship. The similarity among the H. sapiens and monkeys is measured for a total of 210 chromosomes related to 10 species. The similarity measures of these different species show the relationship between the H. sapiens and monkey. This similarity will be helpful at theft identification, maternity identification, disease identification, etc.

  17. Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

    Directory of Open Access Journals (Sweden)

    Utomo Dwi Hatmoko Jati

    2018-01-01

    Full Text Available Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG emissions, to quantify them in terms of carbon dioxide equivalents (CO2e as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31% off-site activities and 36.640 tonnes CO2e (51.687% on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%, and material transportation accounted 24.921 (35.155%. These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

  18. Measuring Carbon Footprint of Flexible Pavement Construction Project in Indonesia

    Science.gov (United States)

    Hatmoko, Jati Utomo Dwi; Hidayat, Arif; Setiawati, Apsari; Prasetyo, Stefanus Catur Adi

    2018-02-01

    Road infrastructure in Indonesia is mainly dominated by flexible pavement type. Its construction process, however, has raised concerns in terms of its environment impacts. This study aims to track and measure the carbon footprint of flexible pavement. The objectives are to map the construction process in relation to greenhouse gas (GHG) emissions, to quantify them in terms of carbon dioxide equivalents (CO2e) as generated by the process of production and transportation of raw materials, and the operation of plant off-site and on-site project. Data collection was done by having site observations and interviews with project stakeholders. The results show a total emissions of 70.888 tonnes CO2e, consisting of 34.248 tonnes CO2e (48.31%) off-site activities and 36.640 tonnes CO2e (51.687%) on-site activities. The two highest CO2e emissions were generated by the use of plant for asphalt concrete laying activities accounted 34.827 tonnes CO2e (49.130%), and material transportation accounted 24.921 (35.155%). These findings provide a new perspective of the carbon footprint in flexible pavement and suggest the urgent need for the use of more efficient and environmentally friendly plant in construction process as it shows the most significant contribution on the CO2e. This study provides valuable understanding on the environmental impact of typical flexible pavement projects in Indonesia, and further can be used for developing green road framework.

  19. Variability in Light Use Efficiency With Changes in Vegetation Structure and Understory, Using a Temporally Changing Flux Footprint at the BERMS Old Jack Pine Site

    Science.gov (United States)

    Chasmer, L.; Barr, A.; Black, A.; Hopkinson, C.; Kljun, N.; McCaughey, H.; Treitz, P.; Shashkov, A.; Zha, T.

    2006-12-01

    Satellite remote sensing algorithms of vegetation gross primary productivity (GPP) often include a light use efficiency (LUE) term that varies depending on meteorological constraints and biome type. LUE is defined as the carbon fixed per mole of photosynthetically active radiation (PAR) absorbed by the canopy (APAR). LUE estimated using GPP from eddy covariance data is complex and changes over short time periods as the available resources (soil moisture, light, temperature, and nitrogen) vary. An understanding of the variability in LUE will improve local to regional estimates of GPP within complex vegetated land cover types using the variety of remote sensing technologies now available. This study examines variability in LUE and GPP at a mature jack pine site within the Fluxnet-Canada BERMS (Boreal Ecosystem Research and Monitoring Sites) study area using a flux footprint model (Kljun et al. 2004) and airborne lidar data (e.g. Chasmer et al. 2006). Three separate weeks of high frequency eddy covariance data are analyzed for June, July, and August 2002 to capture changes in photosynthesis and carbon uptake through the growing season with variations in precipitation and soil moisture. Footprint estimates are derived in half-hourly resolution to provide information on the spatial and temporal variation of the sources of measured C-fluxes. Airborne lidar directly samples ground topography and vegetation structure (i.e., canopy and understory height, gaps between trees, base of canopy), and may provide information on soil moisture and drainage at the ground surface via absorbed and reflected laser pulse energy. Two questions will be addressed specific to net ecosystem productivity (NEP) of the site as a whole, including parts of the ecosystem that may not be properly represented using eddy covariance techniques. These are: 1. How does C uptake and respiration spatially and temporally vary across the jack pine site? 2. How do vegetation characteristics vary with

  20. Human footprint variation while performing load bearing tasks.

    Directory of Open Access Journals (Sweden)

    Cara M Wall-Scheffler

    Full Text Available Human footprint fossils have provided essential evidence about the evolution of human bipedalism as well as the social dynamics of the footprint makers, including estimates of speed, sex and group composition. Generally such estimates are made by comparing footprint evidence with modern controls; however, previous studies have not accounted for the variation in footprint dimensions coming from load bearing activities. It is likely that a portion of the hominins who created these fossil footprints were carrying a significant load, such as offspring or foraging loads, which caused variation in the footprint which could extend to variation in any estimations concerning the footprint's maker. To identify significant variation in footprints due to load-bearing tasks, we had participants (N = 30, 15 males and 15 females walk at a series of speeds carrying a 20kg pack on their back, side and front. Paint was applied to the bare feet of each participant to create footprints that were compared in terms of foot length, foot width and foot area. Female foot length and width increased during multiple loaded conditions. An appreciation of footprint variability associated with carrying loads adds an additional layer to our understanding of the behavior and morphology of extinct hominin populations.

  1. ASSESSMENT OF HOUSEHOLD CARBON FOOTPRINT REDUCTION POTENTIALS

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, Klaas Jan; Homan, Greg; Brown, Rich; Worrell, Ernst; Masanet, Eric

    2009-04-15

    The term ?household carbon footprint? refers to the total annual carbon emissions associated with household consumption of energy, goods, and services. In this project, Lawrence Berkeley National Laboratory developed a carbon footprint modeling framework that characterizes the key underlying technologies and processes that contribute to household carbon footprints in California and the United States. The approach breaks down the carbon footprint by 35 different household fuel end uses and 32 different supply chain fuel end uses. This level of end use detail allows energy and policy analysts to better understand the underlying technologies and processes contributing to the carbon footprint of California households. The modeling framework was applied to estimate the annual home energy and supply chain carbon footprints of a prototypical California household. A preliminary assessment of parameter uncertainty associated with key model input data was also conducted. To illustrate the policy-relevance of this modeling framework, a case study was conducted that analyzed the achievable carbon footprint reductions associated with the adoption of energy efficient household and supply chain technologies.

  2. The relationship between plantar pressure and footprint shape.

    Science.gov (United States)

    Hatala, Kevin G; Dingwall, Heather L; Wunderlich, Roshna E; Richmond, Brian G

    2013-07-01

    Fossil footprints preserve the only direct evidence of the external foot morphologies and gaits of extinct hominin taxa. However, their interpretation requires an understanding of the complex interaction among foot anatomy, foot function, and soft sediment mechanics. We applied an experimental approach aimed at understanding how one measure of foot function, the distribution of plantar pressure, influences footprint topography. Thirty-eight habitually unshod and minimally shod Daasanach individuals (19 male, 19 female) walked across a pressure pad and produced footprints in sediment directly excavated from the geological layer that preserves 1.5 Ma fossil footprints at Ileret, Kenya. Calibrated pressure data were collected and three-dimensional models of all footprints were produced using photogrammetry. We found significant correlations (Spearman's rank, p plantar pressure distribution and relative footprint depths at ten anatomical regions across the foot. Furthermore, plantar pressure distributions followed a pattern similar to footprint topography, with areas of higher pressure tending to leave deeper impressions. This differs from the results of experimental studies performed in different types of sediment, supporting the hypothesis that sediment type influences the relationship between plantar pressure and footprint topography. Our results also lend support to previous interpretations that the shapes of the Ileret footprints preserve evidence of a medial transfer of plantar pressure during late stance phase, as seen in modern humans. However, the weakness of the correlations indicates that much of the variation in relative depths within footprints is not explained by pressure distributions under the foot when walking on firm ground, using the methods applied here. This warrants caution when interpreting the unique foot anatomies and foot functions of extinct hominins evidenced by their footprint structures. Further research is necessary to clarify how

  3. Age, Sex and Stature Estimation from Footprint Dimensions

    Directory of Open Access Journals (Sweden)

    Paurbhi Singh

    2017-04-01

    Full Text Available Objectives: The present study was carried out to evaluate the utility and reliability of footprint dimensions in age, sex and stature determination in the North Indian population. Materials and Methods: This study was carried out using a sample of 400 people (146 female and 254 male aged 10-65 years in Uttar Pradesh, North Western state of India. Footprints of both feet were taken bilaterally, and thus a total of 800 prints were obtained. A cluster of 7 measurements were taken carefully with the help of a scientific scale ruler. Five measurements were length dimensions from the most anterior part of the toe (T1–T5 to the mid rear heel point and two were breadth dimensions from both left and right footprints: breadth at ball (BBAL, breadth at heel (BHEL and 2 indexes: heel-ball Index (HBI and footprint index (FPI. All data were analyzed statistically using Student’s t-test, regression coefficient and Pearson’s correlation for the estimation of sex on the basis of footprint dimensions. Results: The T1 in left footprints was greater than right footprints in males, while T1 and BBAL were both found to be greater in left footprints than right footprints in females. All the seven foot dimensions were higher in males than females. Conclusion: There were statistically significant differences observed in all footprint dimensions between the male and female footprints except LFPI, LHBI, and RHBI.

  4. How much water is required for coal power generation: An analysis of gray and blue water footprints.

    Science.gov (United States)

    Ma, Xiaotian; Yang, Donglu; Shen, Xiaoxu; Zhai, Yijie; Zhang, Ruirui; Hong, Jinglan

    2018-04-28

    Although water resource shortage is closely connected with coal-based electricity generation, relevant water footprint analyses remain limited. This study aims to address this limitation by conducting a water footprint analysis of coal-based electricity generation in China for the first time to inform decision-makers about how freshwater consumption and wastewater discharge can be reduced. In China, 1 kWh of electricity supply obtained 1.78 × 10 -3  m 3 of gray water footprint in 2015, and the value is 1.3 times the blue water footprint score of 1.35 × 10 -3  m 3 /kWh. Although water footprint of 1 kWh of electricity supply decreased, the national total gray water footprint increased significantly from 2006 to 2015 with increase in power generating capacity. An opposite trend was observed for blue water footprint. Indirect processes dominated the influence of gray water footprint, whereas direct freshwater consumption contributed 63.6% to blue water footprint. Ameliorating key processes, including transportation, direct freshwater consumption, direct air emissions, and coal washing could thus bring substantial environmental benefits. Moreover, phosphorus, mercury, hexavalent chromium, arsenic, COD, and BOD 5 were key substances of gray water footprint. Results indicated that the combination of railway and water transportation should be prioritized. The targeted transition toward high coal washing rate and pithead power plant development provides a possibility to relieve environmental burdens, but constraints on water resources in coal production sites have to be considered. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Toward a nitrogen footprint calculator for Tanzania

    Science.gov (United States)

    Hutton, Mary Olivia; Leach, Allison M.; Leip, Adrian; Galloway, James N.; Bekunda, Mateete; Sullivan, Clare; Lesschen, Jan Peter

    2017-03-01

    We present the first nitrogen footprint model for a developing country: Tanzania. Nitrogen (N) is a crucial element for agriculture and human nutrition, but in excess it can cause serious environmental damage. The Sub-Saharan African nation of Tanzania faces a two-sided nitrogen problem: while there is not enough soil nitrogen to produce adequate food, excess nitrogen that escapes into the environment causes a cascade of ecological and human health problems. To identify, quantify, and contribute to solving these problems, this paper presents a nitrogen footprint tool for Tanzania. This nitrogen footprint tool is a concept originally designed for the United States of America (USA) and other developed countries. It uses personal resource consumption data to calculate a per-capita nitrogen footprint. The Tanzania N footprint tool is a version adapted to reflect the low-input, integrated agricultural system of Tanzania. This is reflected by calculating two sets of virtual N factors to describe N losses during food production: one for fertilized farms and one for unfertilized farms. Soil mining factors are also calculated for the first time to address the amount of N removed from the soil to produce food. The average per-capita nitrogen footprint of Tanzania is 10 kg N yr-1. 88% of this footprint is due to food consumption and production, while only 12% of the footprint is due to energy use. Although 91% of farms in Tanzania are unfertilized, the large contribution of fertilized farms to N losses causes unfertilized farms to make up just 83% of the food production N footprint. In a developing country like Tanzania, the main audiences for the N footprint tool are community leaders, planners, and developers who can impact decision-making and use the calculator to plan positive changes for nitrogen sustainability in the developing world.

  6. RNA editing differently affects protein-coding genes in D. melanogaster and H. sapiens.

    Science.gov (United States)

    Grassi, Luigi; Leoni, Guido; Tramontano, Anna

    2015-07-14

    When an RNA editing event occurs within a coding sequence it can lead to a different encoded amino acid. The biological significance of these events remains an open question: they can modulate protein functionality, increase the complexity of transcriptomes or arise from a loose specificity of the involved enzymes. We analysed the editing events in coding regions that produce or not a change in the encoded amino acid (nonsynonymous and synonymous events, respectively) in D. melanogaster and in H. sapiens and compared them with the appropriate random models. Interestingly, our results show that the phenomenon has rather different characteristics in the two organisms. For example, we confirm the observation that editing events occur more frequently in non-coding than in coding regions, and report that this effect is much more evident in H. sapiens. Additionally, in this latter organism, editing events tend to affect less conserved residues. The less frequently occurring editing events in Drosophila tend to avoid drastic amino acid changes. Interestingly, we find that, in Drosophila, changes from less frequently used codons to more frequently used ones are favoured, while this is not the case in H. sapiens.

  7. Comparison between the SAPIEN S3 and the SAPIEN XT transcatheter heart valves: A single-center experience.

    Science.gov (United States)

    Sawaya, Fadi J; Spaziano, Marco; Lefèvre, Thierry; Roy, Andrew; Garot, Phillippe; Hovasse, Thomas; Neylon, Antoinette; Benamer, Hakim; Romano, Mauro; Unterseeh, Thierry; Morice, Marie-Claude; Chevalier, Bernard

    2016-12-26

    To investigate the clinical outcomes of transcatheter aortic valve implantation (TAVI) with the SAPIEN 3 transcatheter heart valve (S3-THV) vs the SAPIEN XT valve (XT-THV). We retrospectively analyzed 507 patients that underwent TAVI with the XT-THV and 283 patients that received the S3-THV at our institution between March 2010 and December 2015. Thirty-day mortality (3.5% vs 8.7%; OR = 0.44, P = 0.21) and 1-year mortality (25.7% vs 20.1%, P = 0.55) were similar in the S3-THV and the XT-THV groups. The rates of both major vascular complication and paravalvular regurgitation (PVR) > 1 were almost 4 times lower in the S3-THV group than the XT-THV group (major vascular complication: 2.8% vs 9.9%, P 1: 2.4% vs 9.7%, P < 0.0001). However, the rate of new pacemaker implantation was almost twice as high in the S3-THV group (17.3% vs 9.8%, P = 0.03). In the S3 group, independent predictors of new permanent pacemaker were pre-procedural RBBB (OR = 4.9; P = 0.001), pre-procedural PR duration (OR = 1.14, P = 0.05) and device lack of coaxiality (OR = 1.13; P = 0.05) during deployment. The S3-THV is associated to lower rates of major vascular complications and PVR but higher rates of new pacemaker compared to the XT-THV. Sub-optimal visualization of the S3-THV in relation to the aortic valvular complex during deployment is a predictor of new permanent pacemaker.

  8. footprintDB: a database of transcription factors with annotated cis elements and binding interfaces.

    Science.gov (United States)

    Sebastian, Alvaro; Contreras-Moreira, Bruno

    2014-01-15

    Traditional and high-throughput techniques for determining transcription factor (TF) binding specificities are generating large volumes of data of uneven quality, which are scattered across individual databases. FootprintDB integrates some of the most comprehensive freely available libraries of curated DNA binding sites and systematically annotates the binding interfaces of the corresponding TFs. The first release contains 2422 unique TF sequences, 10 112 DNA binding sites and 3662 DNA motifs. A survey of the included data sources, organisms and TF families was performed together with proprietary database TRANSFAC, finding that footprintDB has a similar coverage of multicellular organisms, while also containing bacterial regulatory data. A search engine has been designed that drives the prediction of DNA motifs for input TFs, or conversely of TF sequences that might recognize input regulatory sequences, by comparison with database entries. Such predictions can also be extended to a single proteome chosen by the user, and results are ranked in terms of interface similarity. Benchmark experiments with bacterial, plant and human data were performed to measure the predictive power of footprintDB searches, which were able to correctly recover 10, 55 and 90% of the tested sequences, respectively. Correctly predicted TFs had a higher interface similarity than the average, confirming its diagnostic value. Web site implemented in PHP,Perl, MySQL and Apache. Freely available from http://floresta.eead.csic.es/footprintdb.

  9. Carbon footprinting in supply chains

    NARCIS (Netherlands)

    Boukherroub, T.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.; Bouchery, Y.; Corbett, C.J.; Fransoo, J.C.; Tan, T.

    2017-01-01

    This chapter presents an overview of the methods and challenges behind carbon footprinting at the supply chain level. We start by providing some information about the scientific background on climate change. This information is necessary to clarify the overall methodology behind carbon footprinting

  10. Dinosaur footprint assemblage from the Lower Cretaceous Khok Kruat Formation, Khorat Group, northeastern Thailand

    Directory of Open Access Journals (Sweden)

    Shohei Kozu

    2017-11-01

    Full Text Available The Khok Kruat Formation is the upper part of the Khorat Group, which consists of upper Lower Cretaceous non-marine sedimentary rocks in northeastern Thailand. Many dinosaur footprints have been known from the upper Lower Cretaceous (Aptian–Albian Khok Kruat Formation at the Huai Dam Chum (Tha Uthen site, northeastern Thailand. Approximately 600 tracks occur in thin mudstone layer of the northern part of the outcrop at the Huai Dam Chum track site. Two types of footprints, small-sized theropod and crocodylomorph are imprinted with mud cracks and ripple marks on the thin mud layer. Most of footprints are referred to cf. Asianopodus, and are imprinted by small-sized theropoda, probably ornithomimosauria. Theropod tracks are mainly separated into two groups, Group A and Group B. From ichnological viewpoints, the small-sized theropod track assemblage indicates the herd behaviour and its idiosyncratic group composition. In particular, the histogram of size-frequency measurements of Group A shows the anomalous bimodal distribution. We consider that there are two hypotheses; the first one is due to the male-female difference, and the second is a result of the different growing stage.

  11. Carbon footprinting. An introduction for organisations

    International Nuclear Information System (INIS)

    2007-08-01

    To some degree or other, every person and every organisation, either directly or indirectly, is responsible for producing carbon dioxide gas which finds its way into the atmosphere and therefore contributes to the greenhouse effect. The amount of carbon dioxide produced by a person, an organisation, a company, an industry, an event, or even a population can be quantified in what is now described as a carbon footprint. Gases other than carbon dioxide are also released to the atmosphere through man's activities and these can also be evaluated in terms of the carbon footprint. This document explains the meaning of the expression 'carbon footprint' and aims to assist businesses and organisations to determine collective and individual carbon footprints

  12. Footprint parameters as a measure of arch height.

    Science.gov (United States)

    Hawes, M R; Nachbauer, W; Sovak, D; Nigg, B M

    1992-01-01

    The human foot has frequently been categorized into arch height groups based upon analysis of footprint parameters. This study investigates the relationship between directly measured arch height and many of the footprint parameters that have been assumed to represent arch height. A total of 115 male subjects were measured and footprint parameters were calculated from digitized outlines. Correlation and regression analyses were used to determine the relationship between footprint measures and arch height. It may be concluded from the results that footprint parameters proposed in the literature (arch angle, footprint index, and arch index) and two further parameters suggested in this study (arch length index and truncated arch index) are invalid as a basis for prediction or categorization of arch height. The categorization of the human foot according to the footprint measures evaluated in this paper represent no more than indices and angles of the plantar surface of the foot itself.

  13. Quality analysis applied on eddy covariance measurements at complex forest sites using footprint modelling

    Czech Academy of Sciences Publication Activity Database

    Rebmann, C.; Göckede, M.; Foken, T.; Aubinet, M.; Aurela, M.; Berbigier, P.; Bernhofer, C.; Buchmann, N.; Carrara, A.; Cescatti, A.; Ceulemans, R.; Clement, R.; Elbers, J. A.; Granier, A.; Grünwald, T.; Guyon, D.; Havránková, Kateřina; Heinesch, B.; Knohl, A.; Laurila, T.; Longdoz, B.; Marcolla, B.; Markkanen, T.; Miglietta, F.; Moncrieff, J.; Montagnani, L.; Moors, E.; Nardino, M.; Ourcival, J.-M.; Rambal, S.; Rannik, Ü.; Rotenberg, E.; Sedlák, Pavel; Unterhuber, G.; Vesala, T.; Yakir, D.

    2005-01-01

    Roč. 80, - (2005), s. 121-141 ISSN 0177-798X Grant - others:Carboeuroflux(XE) EVK-2-CT-1999-00032 Institutional research plan: CEZ:AV0Z30420517; CEZ:AV0Z6087904 Keywords : Eddy covariance * Quality assurance * Quality control * Footprint modelling * Heterogeneity Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 1.295, year: 2005

  14. Does footprint depth correlate with foot motion and pressure?

    Science.gov (United States)

    Bates, K T; Savage, R; Pataky, T C; Morse, S A; Webster, E; Falkingham, P L; Ren, L; Qian, Z; Collins, D; Bennett, M R; McClymont, J; Crompton, R H

    2013-06-06

    Footprints are the most direct source of evidence about locomotor biomechanics in extinct vertebrates. One of the principal suppositions underpinning biomechanical inferences is that footprint geometry correlates with dynamic foot pressure, which, in turn, is linked with overall limb motion of the trackmaker. In this study, we perform the first quantitative test of this long-standing assumption, using topological statistical analysis of plantar pressures and experimental and computer-simulated footprints. In computer-simulated footprints, the relative distribution of depth differed from the distribution of both peak and pressure impulse in all simulations. Analysis of footprint samples with common loading inputs and similar depths reveals that only shallow footprints lack significant topological differences between depth and pressure distributions. Topological comparison of plantar pressures and experimental beach footprints demonstrates that geometry is highly dependent on overall print depth; deeper footprints are characterized by greater relative forefoot, and particularly toe, depth than shallow footprints. The highlighted difference between 'shallow' and 'deep' footprints clearly emphasizes the need to understand variation in foot mechanics across different degrees of substrate compliance. Overall, our results indicate that extreme caution is required when applying the 'depth equals pressure' paradigm to hominin footprints, and by extension, those of other extant and extinct tetrapods.

  15. National water footprint accounts: the green, blue and grey water footprint of production and consumption

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2011-01-01

    This study quantifies and maps the water footprints of nations from both a production and consumption perspective and estimates international virtual water flows and national and global water savings as a result of trade. The entire estimate includes a breakdown of water footprints, virtual water

  16. Water footprint of hydro power in Norway

    Science.gov (United States)

    Engeland, Kolbjørn; Tallaksen, Lena; Haakon Bakken, Tor; Killingtveit, Ånund

    2015-04-01

    The IPCC Special Report on Renewable Energy (IPCC, 2012) assesses the potential for renewable energy sources to replace fossil-based fuels and benchmarks the technologies with respect to a set of criteria, including their water footprint measured as m3/MWh. While most of the renewable technologies show a typical range of 1-5 m3/MWh, the very sparse data on hydropower range from a minimum of 0.04 to a maximum of 209 m3/MWh. More recent studies on water footprint from hydropower indicate that the water consumption rates could go even far beyond the numbers published by IPCC (2012). The methodological approach behind these numbers are, however, criticized as it appears over-simplistic and several issues need to be defined and clarified in order to present the 'true picture' of the water footprint of hydropower. Despite this, the rather high numbers for hydropower may imply a reputational risk for the sector and also be a direct investment risk in new projects if hydropower is considered a "large-scale water consumer". Estimation of water footprint has two important components (i) definition of water footprint (including system boundaries), and (ii) estimation of evaporation, which is assumed to constitute the main water loss from hydropower. Here we will mainly address the second topic and have chosen to use a water footprint definition based on net evapotranspiration from reservoirs. Thus, we need estimates of evapotranspiration from the land surface prior to inundation and the evaporation from the reservoir after it has been filled up. The primary objective of the study is to estimate water footprint of hydropower in Norway and in particular to answer the following questions: (i) How does different environmental variables influence water footprint estimation in Norway?, and in particular (ii) What is the total/specific water footprint from Norwegian hydropower production? To answer these questions we tested how environmental variables like climate and vegetation

  17. Stringent homology-based prediction of H. sapiens-M. tuberculosis H37Rv protein-protein interactions.

    Science.gov (United States)

    Zhou, Hufeng; Gao, Shangzhi; Nguyen, Nam Ninh; Fan, Mengyuan; Jin, Jingjing; Liu, Bing; Zhao, Liang; Xiong, Geng; Tan, Min; Li, Shijun; Wong, Limsoon

    2014-04-08

    H. sapiens-M. tuberculosis H37Rv protein-protein interaction (PPI) data are essential for understanding the infection mechanism of the formidable pathogen M. tuberculosis H37Rv. Computational prediction is an important strategy to fill the gap in experimental H. sapiens-M. tuberculosis H37Rv PPI data. Homology-based prediction is frequently used in predicting both intra-species and inter-species PPIs. However, some limitations are not properly resolved in several published works that predict eukaryote-prokaryote inter-species PPIs using intra-species template PPIs. We develop a stringent homology-based prediction approach by taking into account (i) differences between eukaryotic and prokaryotic proteins and (ii) differences between inter-species and intra-species PPI interfaces. We compare our stringent homology-based approach to a conventional homology-based approach for predicting host-pathogen PPIs, based on cellular compartment distribution analysis, disease gene list enrichment analysis, pathway enrichment analysis and functional category enrichment analysis. These analyses support the validity of our prediction result, and clearly show that our approach has better performance in predicting H. sapiens-M. tuberculosis H37Rv PPIs. Using our stringent homology-based approach, we have predicted a set of highly plausible H. sapiens-M. tuberculosis H37Rv PPIs which might be useful for many of related studies. Based on our analysis of the H. sapiens-M. tuberculosis H37Rv PPI network predicted by our stringent homology-based approach, we have discovered several interesting properties which are reported here for the first time. We find that both host proteins and pathogen proteins involved in the host-pathogen PPIs tend to be hubs in their own intra-species PPI network. Also, both host and pathogen proteins involved in host-pathogen PPIs tend to have longer primary sequence, tend to have more domains, tend to be more hydrophilic, etc. And the protein domains from both

  18. The biting performance of Homo sapiens and Homo heidelbergensis.

    Science.gov (United States)

    Godinho, Ricardo Miguel; Fitton, Laura C; Toro-Ibacache, Viviana; Stringer, Chris B; Lacruz, Rodrigo S; Bromage, Timothy G; O'Higgins, Paul

    2018-05-01

    Modern humans have smaller faces relative to Middle and Late Pleistocene members of the genus Homo. While facial reduction and differences in shape have been shown to increase biting efficiency in Homo sapiens relative to these hominins, facial size reduction has also been said to decrease our ability to resist masticatory loads. This study compares crania of Homo heidelbergensis and H. sapiens with respect to mechanical advantages of masticatory muscles, force production efficiency, strains experienced by the cranium and modes of deformation during simulated biting. Analyses utilize X-ray computed tomography (CT) scan-based 3D models of a recent modern human and two H. heidelbergensis. While having muscles of similar cross-sectional area to H. heidelbergensis, our results confirm that the modern human masticatory system is more efficient at converting muscle forces into bite forces. Thus, it can produce higher bite forces than Broken Hill for equal muscle input forces. This difference is the result of alterations in relative in and out-lever arm lengths associated with well-known differences in midfacial prognathism. Apparently at odds with this increased efficiency is the finding that the modern human cranium deforms more, resulting in greater strain magnitudes than Broken Hill when biting at the equivalent tooth. Hence, the facial reduction that characterizes modern humans may not have evolved as a result of selection for force production efficiency. These findings provide further evidence for a degree of uncoupling between form and function in the masticatory system of modern humans. This may reflect the impact of food preparation technologies. These data also support previous suggestions that differences in bite force production efficiency can be considered a spandrel, primarily driven by the midfacial reduction in H. sapiens that occurred for other reasons. Midfacial reduction plausibly resulted in a number of other significant changes in morphology, such

  19. Business Engagement with Sustainable Water Resource Management through Water Footprint Accounting: The Case of the Barilla Company

    Directory of Open Access Journals (Sweden)

    Marta Antonelli

    2015-05-01

    Full Text Available This study investigates business engagement in sustainable water management, focusing on water footprint accounting as a tool to account for water use in food supply chains. An explorative analysis is conducted on the Barilla Company. The study explores two corporate strategies aimed at achieving more sustainable water use: the adoption of environmental products declarations (EPDs, a reporting system that accounts for the environmental footprints of Barilla’s pasta and other products; and the implementation of the Aureo Wheat Programme. The study deployed both primary and secondary data. The study shows that the largest share of the water footprint of pasta relates to the cultivation phase (over 90%, which is almost fully rainfed. EPDs show that the water footprint of the other phases of the supply chain is negligible. It is argued that the use of water footprinting in EPDs can raise awareness about water use in agricultural supply chains to reach a broad spectrum of stakeholders, including consumers. The study also shows that the implementation of the Aureo Wheat Programme, consisting of a shift in cultivation site and in the type of wheat, enabled a reduction in the blue water footprint of pasta, with water savings amounting to 35 million m3 of blue water since 2011.

  20. Structural and molecular study of the supraspinatus muscle of modern humans (Homo sapiens) and common chimpanzees (Pan troglodytes).

    Science.gov (United States)

    Potau, J M; Casado, A; de Diego, M; Ciurana, N; Arias-Martorell, J; Bello-Hellegouarch, G; Barbosa, M; de Paz, F J; Pastor, J F; Pérez-Pérez, A

    2018-04-21

    To analyze the muscle architecture and the expression pattern of the myosin heavy chain (MyHC) isoforms in the supraspinatus of Pan troglodytes and Homo sapiens in order to identify differences related to their different types of locomotion. We have analyzed nine supraspinatus muscles of Pan troglodytes and ten of Homo sapiens. For each sample, we have recorded the muscle fascicle length (MFL), the pennation angle, and the physiological cross-sectional area (PCSA). In the same samples, by real-time quantitative polymerase chain reaction, we have assessed the percentages of expression of the MyHC-I, MyHC-IIa, and MyHC-IIx isoforms. The mean MFL of the supraspinatus was longer (p = 0.001) and the PCSA was lower (p sapiens than in Pan troglodytes. Although the percentage of expression of MyHC-IIa was lower in Homo sapiens than in Pan troglodytes (p = 0.035), the combination of MyHC-IIa and MyHC-IIx was expressed at a similar percentage in the two species. The longer MFL in the human supraspinatus is associated with a faster contractile velocity, which reflects the primary function of the upper limbs in Homo sapiens-the precise manipulation of objects-an adaptation to bipedal locomotion. In contrast, the larger PCSA in Pan troglodytes is related to the important role of the supraspinatus in stabilizing the glenohumeral joint during the support phase of knuckle-walking. These functional differences of the supraspinatus in the two species are not reflected in differences in the expression of the MyHC isoforms. © 2018 Wiley Periodicals, Inc.

  1. Mapping the Carbon Footprint of Nations.

    Science.gov (United States)

    Kanemoto, Keiichiro; Moran, Daniel; Hertwich, Edgar G

    2016-10-04

    Life cycle thinking asks companies and consumers to take responsibility for emissions along their entire supply chain. As the world economy becomes more complex it is increasingly difficult to connect consumers and other downstream users to the origins of their greenhouse gas (GHG) emissions. Given the important role of subnational entities-cities, states, and companies-in GHG abatement efforts, it would be advantageous to better link downstream users to facilities and regulators who control primary emissions. We present a new spatially explicit carbon footprint method for establishing such connections. We find that for most developed countries the carbon footprint has diluted and spread: for example, since 1970 the U.S. carbon footprint has grown 23% territorially, and 38% in consumption-based terms, but nearly 200% in spatial extent (i.e., the minimum area needed to contain 90% of emissions). The rapidly growing carbon footprints of China and India, however, do not show such a spatial expansion of their consumption footprints in spite of their increasing participation in the world economy. In their case, urbanization concentrates domestic pollution and this offsets the increasing importance of imports.

  2. Development of My Footprint Calculator

    Science.gov (United States)

    Mummidisetti, Karthik

    The Environmental footprint is a very powerful tool that helps an individual to understand how their everyday activities are impacting environmental surroundings. Data shows that global climate change, which is a growing concern for nations all over the world, is already affecting humankind, plants and animals through raising ocean levels, droughts & desertification and changing weather patterns. In addition to a wide range of policy measures implemented by national and state governments, it is necessary for individuals to understand the impact that their lifestyle may have on their personal environmental footprint, and thus over the global climate change. "My Footprint Calculator" (myfootprintcalculator.com) has been designed to be one the simplest, yet comprehensive, web tools to help individuals calculate and understand their personal environmental impact. "My Footprint Calculator" is a website that queries users about their everyday habits and activities and calculates their personal impact on the environment. This website was re-designed to help users determine their environmental impact in various aspects of their lives ranging from transportation and recycling habits to water and energy usage with the addition of new features that will allow users to share their experiences and their best practices with other users interested in reducing their personal Environmental footprint. The collected data is stored in the database and a future goal of this work plans to analyze the collected data from all users (anonymously) for developing relevant trends and statistics.

  3. Carbon footprint of cartons in Europe - Carbon Footprint methodology and biogenic carbon sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Elin; Karlsson, Per-Erik; Hallberg, Lisa; Jelse, Kristian

    2010-05-15

    A methodology for carbon sequestration in forests used for carton production has been developed and applied. The average Carbon Footprint of converted cartons sold in Europe has been calculated and summarised. A methodology for a EU27 scenario based assessment of end of life treatment has been developed and applied. The average Carbon Footprint represents the total Greenhouse Gas emissions from one average tonne of virgin based fibres and recycled fibres produced, converted and printed in Europe

  4. Structural modeling and docking studies of ribose 5-phosphate isomerase from Leishmania major and Homo sapiens: a comparative analysis for Leishmaniasis treatment.

    Science.gov (United States)

    Capriles, Priscila V S Z; Baptista, Luiz Phillippe R; Guedes, Isabella A; Guimarães, Ana Carolina R; Custódio, Fabio L; Alves-Ferreira, Marcelo; Dardenne, Laurent E

    2015-02-01

    Leishmaniases are caused by protozoa of the genus Leishmania and are considered the second-highest cause of death worldwide by parasitic infection. The drugs available for treatment in humans are becoming ineffective mainly due to parasite resistance; therefore, it is extremely important to develop a new chemotherapy against these parasites. A crucial aspect of drug design development is the identification and characterization of novel molecular targets. In this work, through an in silico comparative analysis between the genomes of Leishmania major and Homo sapiens, the enzyme ribose 5-phosphate isomerase (R5PI) was indicated as a promising molecular target. R5PI is an important enzyme that acts in the pentose phosphate pathway and catalyzes the interconversion of d-ribose-5-phosphate (R5P) and d-ribulose-5-phosphate (5RP). R5PI activity is found in two analogous groups of enzymes called RpiA (found in H. sapiens) and RpiB (found in L. major). Here, we present the first report of the three-dimensional (3D) structures and active sites of RpiB from L. major (LmRpiB) and RpiA from H. sapiens (HsRpiA). Three-dimensional models were constructed by applying a hybrid methodology that combines comparative and ab initio modeling techniques, and the active site was characterized based on docking studies of the substrates R5P (furanose and ring-opened forms) and 5RP. Our comparative analyses show that these proteins are structural analogs and that distinct residues participate in the interconversion of R5P and 5RP. We propose two distinct reaction mechanisms for the reversible isomerization of R5P to 5RP, which is catalyzed by LmRpiB and HsRpiA. We expect that the present results will be important in guiding future molecular modeling studies to develop new drugs that are specially designed to inhibit the parasitic form of the enzyme without significant effects on the human analog. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. Earliest evidence for the structure of Homo sapiens populations in Africa

    Science.gov (United States)

    Scerri, Eleanor M. L.; Drake, Nick A.; Jennings, Richard; Groucutt, Huw S.

    2014-10-01

    Understanding the structure and variation of Homo sapiens populations in Africa is critical for interpreting multiproxy evidence of their subsequent dispersals into Eurasia. However, there is no consensus on early H. sapiens demographic structure, or its effects on intra-African dispersals. Here, we show how a patchwork of ecological corridors and bottlenecks triggered a successive budding of populations across the Sahara. Using a temporally and spatially explicit palaeoenvironmental model, we found that the Sahara was not uniformly ameliorated between ∼130 and 75 thousand years ago (ka), as has been stated. Model integration with multivariate analyses of corresponding stone tools then revealed several spatially defined technological clusters which correlated with distinct palaeobiomes. Similarities between technological clusters were such that they decreased with distance except where connected by palaeohydrological networks. These results indicate that populations at the Eurasian gateway were strongly structured, which has implications for refining the demographic parameters of dispersals out of Africa.

  6. The carbon footprint of exported Brazilian yellow melon

    NARCIS (Netherlands)

    Brito de Figueirêdo, M.C.; Kroeze, C.; Potting, J.; Silva Barros, da V.; Sousa de Aragão, A.; Sonsol Gondim, R.; Boer, de I.J.M.

    2013-01-01

    The carbon footprint of food has become important for producers worldwide as consumers and retail companies increasingly base their purchase decisions on carbon footprint labels. In this context, our objectives is to assess the carbon footprint (CF) of Brazilian yellow melon exported from the Low

  7. Interpreting locomotor biomechanics from the morphology of human footprints.

    Science.gov (United States)

    Hatala, Kevin G; Wunderlich, Roshna E; Dingwall, Heather L; Richmond, Brian G

    2016-01-01

    Fossil hominin footprints offer unique direct windows to the locomotor behaviors of our ancestors. These data could allow a clearer understanding of the evolution of human locomotion by circumventing issues associated with indirect interpretations of habitual locomotor patterns from fossil skeletal material. However, before we can use fossil hominin footprints to understand better the evolution of human locomotion, we must first develop an understanding of how locomotor biomechanics are preserved in, and can be inferred from, footprint morphologies. In this experimental study, 41 habitually barefoot modern humans created footprints under controlled conditions in which variables related to locomotor biomechanics could be quantified. Measurements of regional topography (depth) were taken from 3D models of those footprints, and principal components analysis was used to identify orthogonal axes that described the largest proportions of topographic variance within the human experimental sample. Linear mixed effects models were used to quantify the influences of biomechanical variables on the first five principal axes of footprint topographic variation, thus providing new information on the biomechanical variables most evidently expressed in the morphology of human footprints. The footprint's overall depth was considered as a confounding variable, since biomechanics may be linked to the extent to which a substrate deforms. Three of five axes showed statistically significant relationships with variables related to both locomotor biomechanics and substrate displacement; one axis was influenced only by biomechanics and another only by the overall depth of the footprint. Principal axes of footprint morphological variation were significantly related to gait type (walking or running), kinematics of the hip and ankle joints and the distribution of pressure beneath the foot. These results provide the first quantitative framework for developing hypotheses regarding the

  8. Neonatal imaging using an on-site small footprint MR scanner

    Energy Technology Data Exchange (ETDEWEB)

    Merhar, Stephanie L. [Perinatal Institute, Division of Neonatology, Cincinnati Children' s Hospital Medical Center, Cincinnati, OH (United States); Tkach, Jean A.; Dumoulin, Charles L. [Cincinnati Children' s Hospital Medical Center, Imaging Research Center, Cincinnati, OH (United States); Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States); Woods, Jason C. [Cincinnati Children' s Hospital Medical Center, Imaging Research Center, Cincinnati, OH (United States); Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States); Cincinnati Children' s Hospital Medical Center, Division of Pulmonary Medicine, Cincinnati, OH (United States); South, Andrew P.; Wiland, Emily L. [Children' s Hospital Medical Center of Akron, Division of Neonatology, Akron, OH (United States); Rattan, Mantosh S.; Kline-Fath, Beth M. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States)

    2017-07-15

    With its soft-tissue definition, multiplanar capabilities and advanced imaging techniques, magnetic resonance imaging (MRI) for neonatal care can provide better understanding of pathology, allowing for improved care and counseling to families. However, MR imaging in neonates is often difficult due to patient instability and the complex support necessary for survival. In our institution, we have installed a small footprint magnet in the neonatal intensive care unit (NICU) to minimize patient risks and provide the ability to perform MR imaging safely in this population. With this system, we have been able to provide more information with regard to central nervous system disorders, abdominal pathology, and pulmonary and airway abnormalities, and have performed postmortem imaging as an alternative or supplement to pathological autopsy. In our experience, an MR scanner situated within the NICU has allowed for safer and more expedited imaging of this vulnerable population. (orig.)

  9. Neonatal imaging using an on-site small footprint MR scanner

    International Nuclear Information System (INIS)

    Merhar, Stephanie L.; Tkach, Jean A.; Dumoulin, Charles L.; Woods, Jason C.; South, Andrew P.; Wiland, Emily L.; Rattan, Mantosh S.; Kline-Fath, Beth M.

    2017-01-01

    With its soft-tissue definition, multiplanar capabilities and advanced imaging techniques, magnetic resonance imaging (MRI) for neonatal care can provide better understanding of pathology, allowing for improved care and counseling to families. However, MR imaging in neonates is often difficult due to patient instability and the complex support necessary for survival. In our institution, we have installed a small footprint magnet in the neonatal intensive care unit (NICU) to minimize patient risks and provide the ability to perform MR imaging safely in this population. With this system, we have been able to provide more information with regard to central nervous system disorders, abdominal pathology, and pulmonary and airway abnormalities, and have performed postmortem imaging as an alternative or supplement to pathological autopsy. In our experience, an MR scanner situated within the NICU has allowed for safer and more expedited imaging of this vulnerable population. (orig.)

  10. The carbon footprint of cataract surgery.

    Science.gov (United States)

    Morris, D S; Wright, T; Somner, J E A; Connor, A

    2013-04-01

    Climate change is predicted to be one of the largest global health threats of the 21st century. Health care itself is a large contributor to carbon emissions. Determining the carbon footprint of specific health care activities such as cataract surgery allows the assessment of associated emissions and identifies opportunities for reduction. To assess the carbon footprint of a cataract pathway in a British teaching hospital. This was a component analysis study for one patient having first eye cataract surgery in the University Hospital of Wales, Cardiff. Activity data was collected from three sectors, building and energy use, travel and procurement. Published emissions factors were applied to this data to provide figures in carbon dioxide equivalents (CO2eq). The carbon footprint for one cataract operation was 181.8 kg CO2eq. On the basis that 2230 patients were treated for cataracts during 2011 in Cardiff, this has an associated carbon footprint of 405.4 tonnes CO2eq. Building and energy use was estimated to account for 36.1% of overall emissions, travel 10.1% and procurement 53.8%, with medical equipment accounting for the most emissions at 32.6%. This is the first published carbon footprint of cataract surgery and acts as a benchmark for other studies as well as identifying areas for emissions reduction. Within the procurement sector, dialogue with industry is important to reduce the overall carbon footprint. Sustainability should be considered when cataract pathways are designed as there is potential for reduction in all sectors with the possible side effects of saving costs and improving patient care.

  11. A flux footprint analysis to understand ecosystem fluxes in an intensively managed landscape

    Science.gov (United States)

    Hernandez Rodriguez, L. C.; Goodwell, A. E.; Kumar, P.

    2017-12-01

    Flux tower studies in agricultural sites have mainly been done at plot scale, where the footprint of the instruments is small such that the data reveals the behaviour of the nearby crop on which the study is focused. In the Midwestern United States, the agricultural ecosystem and its associated drainage, evapotranspiration, and nutrient dynamics are dominant influences on interactions between the soil, land, and atmosphere. In this study, we address large-scale ecohydrologic fluxes and states in an intensively managed landscape based on data from a 25m high eddy covariance flux tower. We show the calculated upwind distance and flux footprint for a flux tower located in Central Illinois as part of the Intensively Managed Landscapes Critical Zone Observatory (IMLCZO). In addition, we calculate the daily energy balance during the summer of 2016 from the flux tower measurements and compare with the modelled energy balance from a representative corn crop located in the flux tower footprint using the Multi-Layer Canopy model, MLCan. The changes in flux footprint over the course of hours, days, and the growing season have significant implications for the measured fluxes of carbon and energy at the flux tower. We use MLCan to simulate these fluxes under land covers of corn and soybeans. Our results demonstrate how the instrument heights impact the footprint of the captured eddy covariance fluxes, and we explore the implication for hydrological analysis. The convective turbulent atmosphere during the daytime shows a wide footprint of more than 10 km2, which reaches 3km length for the 90% contribution, where buoyancy is the dominant mechanism driving turbulence. In contrast, the stable atmosphere during the night-time shows a narrower footprint that goes beyond 8km2 and grows in the direction of the prevalent wind, which exceeds 4 km in length. This study improves our understanding of agricultural ecosystem behaviour in terms of the magnitude and variability of fluxes and

  12. Assessing Water and Carbon Footprints for Green Water Resource Management

    Science.gov (United States)

    This slide presentation will focus on the following points: (1) Water footprint and carbon footprint are two criteria evaluating the greenness in urban development, (2) Two cases are examined and presented: water footprints in energy productions and carbon footprints in water ...

  13. Geometric morphometric footprint analysis of young women

    OpenAIRE

    Domjanic, Jacqueline; Fieder, Martin; Seidler, Horst; Mitteroecker, Philipp

    2013-01-01

    Background Most published attempts to quantify footprint shape are based on a small number of measurements. We applied geometric morphometric methods to study shape variation of the complete footprint outline in a sample of 83 adult women. Methods The outline of the footprint, including the toes, was represented by a comprehensive set of 85 landmarks and semilandmarks. Shape coordinates were computed by Generalized Procrustes Analysis. Results The first four principal components represented t...

  14. Solar Powered Automated Pipe Water Management System, Water Footprint and Carbon Footprint in Soybean Production

    Science.gov (United States)

    Satyanto, K. S.; Abang, Z. E.; Arif, C.; Yanuar, J. P. M.

    2018-05-01

    An automatic water management system for agriculture land was developed based on mini PC as controller to manage irrigation and drainage. The system was integrated with perforated pipe network installed below the soil surface to enable water flow in and out through the network, and so water table of the land can be set at a certain level. The system was operated by using solar power electricity supply to power up water level and soil moisture sensors, Raspberry Pi controller and motorized valve actuator. This study aims to implement the system in controlling water level at a soybean production land, and further to observe water footprint and carbon footprint contribution of the soybean production process with application of the automated system. The water level of the field can be controlled around 19 cm from the base. Crop water requirement was calculated using Penman-Monteith approach, with the productivity of soybean 3.57t/ha, total water footprint in soybean production is 872.01 m3/t. Carbon footprint was calculated due to the use of solar power electric supply system and during the soybean production emission was estimated equal to 1.85 kg of CO2.

  15. Life as a Cosmic Phenomenon: 2. the Panspermic Trajectory of Homo Sapiens

    Science.gov (United States)

    Tokoro, Gensuke; Wickramasinghe, N. Chandra

    We discuss the origin and evolution of Homo sapiens in a cosmic context, and in relation to the Hoyle-Wickramasinghe theory of panspermia for which there is now overwhelming evidence. It is argued that the first bacteria (archea) incident on the Earth via the agency of comets 3.8-4 billion years ago continued at later times to be augmented by viral genes (DNA, RNA) from space that eventually led to the evolutionary patterns we see in present-day biology. We argue that the current evolutionary status of Homo sapiens as well as its future trajectory is circumscribed by evolutionary processes that were pre-determined on a cosmic scale -- over vast distances and enormous spans of cosmic time. Based on this teleological hypothesis we postulate that two distinct classes of cosmic viruses (cosmic viral genes) are involved in accounting for the facts relating to the evolution of life.

  16. Improving odour assessment in LCA—the odour footprint

    DEFF Research Database (Denmark)

    Peters, Gregory M.; Murphy, Kathleen R.; Adamsen, Anders Peter S.

    2014-01-01

    in the life cycle assessment (LCA) community. This article aims to redress this. Results and discussion: We produced a list of 33 linear characterisation factors based on hydrogen sulphide equivalents, analogous to the linear carbon dioxide equivalency factors in use in carbon footprinting...... assessment in LCA. Unlike it, the method presented here considers the persistence of odourants. Over time, we hope to increase the number of characterised odourants, enabling analysts to perform simple site-generic LCA on systems with odourant emissions. Methods: Firstly, a framework for the assessment...

  17. Spotting Cheetahs: Identifying Individuals by Their Footprints.

    Science.gov (United States)

    Jewell, Zoe C; Alibhai, Sky K; Weise, Florian; Munro, Stuart; Van Vuuren, Marlice; Van Vuuren, Rudie

    2016-05-01

    The cheetah (Acinonyx jubatus) is Africa's most endangered large felid and listed as Vulnerable with a declining population trend by the IUCN(1). It ranges widely over sub-Saharan Africa and in parts of the Middle East. Cheetah conservationists face two major challenges, conflict with landowners over the killing of domestic livestock, and concern over range contraction. Understanding of the latter remains particularly poor(2). Namibia is believed to support the largest number of cheetahs of any range country, around 30%, but estimates range from 2,905(3) to 13,520(4). The disparity is likely a result of the different techniques used in monitoring. Current techniques, including invasive tagging with VHF or satellite/GPS collars, can be costly and unreliable. The footprint identification technique(5) is a new tool accessible to both field scientists and also citizens with smartphones, who could potentially augment data collection. The footprint identification technique analyzes digital images of footprints captured according to a standardized protocol. Images are optimized and measured in data visualization software. Measurements of distances, angles, and areas of the footprint images are analyzed using a robust cross-validated pairwise discriminant analysis based on a customized model. The final output is in the form of a Ward's cluster dendrogram. A user-friendly graphic user interface (GUI) allows the user immediate access and clear interpretation of classification results. The footprint identification technique algorithms are species specific because each species has a unique anatomy. The technique runs in a data visualization software, using its own scripting language (jsl) that can be customized for the footprint anatomy of any species. An initial classification algorithm is built from a training database of footprints from that species, collected from individuals of known identity. An algorithm derived from a cheetah of known identity is then able to classify

  18. Spotting Cheetahs: Identifying Individuals by Their Footprints

    Science.gov (United States)

    Jewell, Zoe C.; Alibhai, Sky K.; Weise, Florian; Munro, Stuart; Van Vuuren, Marlice; Van Vuuren, Rudie

    2016-01-01

    The cheetah (Acinonyx jubatus) is Africa's most endangered large felid and listed as Vulnerable with a declining population trend by the IUCN1. It ranges widely over sub-Saharan Africa and in parts of the Middle East. Cheetah conservationists face two major challenges, conflict with landowners over the killing of domestic livestock, and concern over range contraction. Understanding of the latter remains particularly poor2. Namibia is believed to support the largest number of cheetahs of any range country, around 30%, but estimates range from 2,9053 to 13,5204. The disparity is likely a result of the different techniques used in monitoring. Current techniques, including invasive tagging with VHF or satellite/GPS collars, can be costly and unreliable. The footprint identification technique5 is a new tool accessible to both field scientists and also citizens with smartphones, who could potentially augment data collection. The footprint identification technique analyzes digital images of footprints captured according to a standardized protocol. Images are optimized and measured in data visualization software. Measurements of distances, angles, and areas of the footprint images are analyzed using a robust cross-validated pairwise discriminant analysis based on a customized model. The final output is in the form of a Ward's cluster dendrogram. A user-friendly graphic user interface (GUI) allows the user immediate access and clear interpretation of classification results. The footprint identification technique algorithms are species specific because each species has a unique anatomy. The technique runs in a data visualization software, using its own scripting language (jsl) that can be customized for the footprint anatomy of any species. An initial classification algorithm is built from a training database of footprints from that species, collected from individuals of known identity. An algorithm derived from a cheetah of known identity is then able to classify free

  19. Anza palaeoichnological site. Late Cretaceous. Morocco. Part II. Problems of large dinosaur trackways and the first African Macropodosaurus trackway

    Science.gov (United States)

    Masrour, Moussa; Lkebir, Noura; Pérez-Lorente, Félix

    2017-10-01

    The Anza site shows large ichnological surfaces indicating the coexistence in the same area of different vertebrate footprints (dinosaur and pterosaur) and of different types (tridactyl and tetradactyl, semiplantigrade and rounded without digit marks) and the footprint variability of long trackways. This area may become a world reference in ichnology because it contains the second undebatable African site with Cretaceous pterosaur footprints - described in part I - and the first African site with Macropodosaurus footprints. In this work, problems related to long trackways are also analyzed, such as their sinuosity, the order-disorder of the variability (long-short) of the pace length and the difficulty of morphological classification of the theropod footprints due to their morphological variability.

  20. Nitrogen footprints: past, present and future

    Science.gov (United States)

    Galloway, James N.; Winiwarter, Wilfried; Leip, Adrian; Leach, Allison M.; Bleeker, Albert; Willem Erisman, Jan

    2014-11-01

    The human alteration of the nitrogen cycle has evolved from minimal in the mid-19th century to extensive in the present time. The consequences to human and environmental health are significant. While much attention has been given to the extent and impacts of the alteration, little attention has been given to those entities (i.e., consumers, institutions) that use the resources that result in extensive reactive nitrogen (Nr) creation. One strategy for assessment is the use of nitrogen footprint tools. A nitrogen footprint is generally defined as the total amount of Nr released to the environment as a result of an entity’s consumption patterns. This paper reviews a number of nitrogen footprint tools (N-Calculator, N-Institution, N-Label, N-Neutrality, N-Indicator) that are designed to provide that attention. It reviews N-footprint tools for consumers as a function of the country that they live in (N-Calculator, N-Indicator) and the products they buy (N-Label), for the institutions that people work in and are educated in (N-Institution), and for events and decision-making regarding offsets (N-Neutrality). N footprint tools provide a framework for people to make decisions about their resource use and show them how offsets can be coupled with behavior change to decrease consumer/institution contributions to N-related problems.

  1. Carbon footprint of a music festival

    Science.gov (United States)

    Schafer, K. V.

    2009-12-01

    In an effort to curb CO2 and by extension, greenhouse gas emissions various initiatives have been taken statewide, nationally and internationally. However, benchmarks and metrics are not clearly defined for CO2 and CO2 equivalent accounting. The objective of this study is to estimate the carbon footprint of the Lincoln Park Music Festival which occurs annually in Newark, NJ. This festival runs for three days each summer and consists of music, food vendors, merchandise and a green marketplace. In order to determine the carbon footprint generated by transportation, surveys of participants were analyzed. Of the approximately 40,000 participants in 2009, 3.3% were surveyed. About 30% of respondents commuted to the festival by car with an average of 10 miles traveling distance. Transportation emission amounted to an estimated CO2 emission of 188 metric tons for all three days combined. Trash at the music festival was weighed, components estimated, and potential CO2 emission calculated if incinerated. 63% of the trash was found to be carbon based, which is the equivalent of three metric tons of CO2 if incinerated. The majority of the trash (>60%) could have been recycled, thus significantly reducing the carbon footprint. In order to limit the carbon footprint of this festival, alternative transport options would be advisable as transport accounted for the largest proportion of the carbon footprint at this festival.

  2. Nitrogen footprints: past, present and future

    International Nuclear Information System (INIS)

    Galloway, James N; Leach, Allison M; Winiwarter, Wilfried; Leip, Adrian; Bleeker, Albert; Erisman, Jan Willem

    2014-01-01

    The human alteration of the nitrogen cycle has evolved from minimal in the mid-19th century to extensive in the present time. The consequences to human and environmental health are significant. While much attention has been given to the extent and impacts of the alteration, little attention has been given to those entities (i.e., consumers, institutions) that use the resources that result in extensive reactive nitrogen (Nr) creation. One strategy for assessment is the use of nitrogen footprint tools. A nitrogen footprint is generally defined as the total amount of Nr released to the environment as a result of an entity’s consumption patterns. This paper reviews a number of nitrogen footprint tools (N-Calculator, N-Institution, N-Label, N-Neutrality, N-Indicator) that are designed to provide that attention. It reviews N-footprint tools for consumers as a function of the country that they live in (N-Calculator, N-Indicator) and the products they buy (N-Label), for the institutions that people work in and are educated in (N-Institution), and for events and decision-making regarding offsets (N-Neutrality). N footprint tools provide a framework for people to make decisions about their resource use and show them how offsets can be coupled with behavior change to decrease consumer/institution contributions to N-related problems. (paper)

  3. Pyrite footprinting of RNA

    International Nuclear Information System (INIS)

    Schlatterer, Jörg C.; Wieder, Matthew S.; Jones, Christopher D.; Pollack, Lois; Brenowitz, Michael

    2012-01-01

    Highlights: ► RNA structure is mapped by pyrite mediated · OH footprinting. ► Repetitive experiments can be done in a powdered pyrite filled cartridge. ► High · OH reactivity of nucleotides imply dynamic role in Diels–Alderase catalysis. -- Abstract: In RNA, function follows form. Mapping the surface of RNA molecules with chemical and enzymatic probes has revealed invaluable information about structure and folding. Hydroxyl radicals ( · OH) map the surface of nucleic acids by cutting the backbone where it is accessible to solvent. Recent studies showed that a microfluidic chip containing pyrite (FeS 2 ) can produce sufficient · OH to footprint DNA. The 49-nt Diels–Alder RNA enzyme catalyzes the C–C bond formation between a diene and a dienophile. A crystal structure, molecular dynamics simulation and atomic mutagenesis studies suggest that nucleotides of an asymmetric bulge participate in the dynamic architecture of the ribozyme’s active center. Of note is that residue U42 directly interacts with the product in the crystallized RNA/product complex. Here, we use powdered pyrite held in a commercially available cartridge to footprint the Diels–Alderase ribozyme with single nucleotide resolution. Residues C39 to U42 are more reactive to · OH than predicted by the solvent accessibility calculated from the crystal structure suggesting that this loop is dynamic in solution. The loop’s flexibility may contribute to substrate recruitment and product release. Our implementation of pyrite-mediated · OH footprinting is a readily accessible approach to gleaning information about the architecture of small RNA molecules.

  4. The environmental cost of subsistence: Optimizing diets to minimize footprints

    International Nuclear Information System (INIS)

    Gephart, Jessica A.; Davis, Kyle F.; Emery, Kyle A.; Leach, Allison M.; Galloway, James N.; Pace, Michael L.

    2016-01-01

    The question of how to minimize monetary cost while meeting basic nutrient requirements (a subsistence diet) was posed by George Stigler in 1945. The problem, known as Stigler's diet problem, was famously solved using the simplex algorithm. Today, we are not only concerned with the monetary cost of food, but also the environmental cost. Efforts to quantify environmental impacts led to the development of footprint (FP) indicators. The environmental footprints of food production span multiple dimensions, including greenhouse gas emissions (carbon footprint), nitrogen release (nitrogen footprint), water use (blue and green water footprint) and land use (land footprint), and a diet minimizing one of these impacts could result in higher impacts in another dimension. In this study based on nutritional and population data for the United States, we identify diets that minimize each of these four footprints subject to nutrient constraints. We then calculate tradeoffs by taking the composition of each footprint's minimum diet and calculating the other three footprints. We find that diets for the minimized footprints tend to be similar for the four footprints, suggesting there are generally synergies, rather than tradeoffs, among low footprint diets. Plant-based food and seafood (fish and other aquatic foods) commonly appear in minimized diets and tend to most efficiently supply macronutrients and micronutrients, respectively. Livestock products rarely appear in minimized diets, suggesting these foods tend to be less efficient from an environmental perspective, even when nutrient content is considered. The results' emphasis on seafood is complicated by the environmental impacts of aquaculture versus capture fisheries, increasing in aquaculture, and shifting compositions of aquaculture feeds. While this analysis does not make specific diet recommendations, our approach demonstrates potential environmental synergies of plant- and seafood-based diets. As a result, this study

  5. The environmental cost of subsistence: Optimizing diets to minimize footprints

    Energy Technology Data Exchange (ETDEWEB)

    Gephart, Jessica A.; Davis, Kyle F. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States); Emery, Kyle A. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States); University of California, Santa Barbara. Marine Science Institute, Santa Barbara, CA 93106 (United States); Leach, Allison M. [University of New Hampshire, 107 Nesmith Hall, 131 Main Street, Durham, NH, 03824 (United States); Galloway, James N.; Pace, Michael L. [University of Virginia, Department of Environmental Sciences, 291 McCormick Road, Charlottesville, VA 22904 (United States)

    2016-05-15

    The question of how to minimize monetary cost while meeting basic nutrient requirements (a subsistence diet) was posed by George Stigler in 1945. The problem, known as Stigler's diet problem, was famously solved using the simplex algorithm. Today, we are not only concerned with the monetary cost of food, but also the environmental cost. Efforts to quantify environmental impacts led to the development of footprint (FP) indicators. The environmental footprints of food production span multiple dimensions, including greenhouse gas emissions (carbon footprint), nitrogen release (nitrogen footprint), water use (blue and green water footprint) and land use (land footprint), and a diet minimizing one of these impacts could result in higher impacts in another dimension. In this study based on nutritional and population data for the United States, we identify diets that minimize each of these four footprints subject to nutrient constraints. We then calculate tradeoffs by taking the composition of each footprint's minimum diet and calculating the other three footprints. We find that diets for the minimized footprints tend to be similar for the four footprints, suggesting there are generally synergies, rather than tradeoffs, among low footprint diets. Plant-based food and seafood (fish and other aquatic foods) commonly appear in minimized diets and tend to most efficiently supply macronutrients and micronutrients, respectively. Livestock products rarely appear in minimized diets, suggesting these foods tend to be less efficient from an environmental perspective, even when nutrient content is considered. The results' emphasis on seafood is complicated by the environmental impacts of aquaculture versus capture fisheries, increasing in aquaculture, and shifting compositions of aquaculture feeds. While this analysis does not make specific diet recommendations, our approach demonstrates potential environmental synergies of plant- and seafood-based diets. As a result

  6. Chew Bahir: A Key Site within the Hominin Sites and Paleolakes Drilling Project, towards a Half Million-Year Climate Record from Southern Ethiopia

    Science.gov (United States)

    Schaebitz, F.; Asrat, A.; Lamb, H. F.; Trauth, M. H.; Foerster, V. E.; Junginger, A.; Raub, T. D.; Gromig, R.; Viehberg, F. A.; Roberts, H. M.; Cohen, A.

    2015-12-01

    Chew Bahir, a saline mudflat today, is one of the five sites in East Africa, drilled within the framework of HSPDP (Hominin Site and Paleolakes Drilling Project). It is also one of the key sites of the Collaborative Research Centre (CRC-806) "Our way to Europe" aiming at the reconstruction of environmental conditions in the source region of modern man (H. sapiens). It is suggested that a changing environment could have triggered the mobility and dispersal of modern man. The oldest known fossils of anatomical modern humans (~195 ka BP) were found in the Omo basin, not more than 90km westwards of our drill site. The deposits in the tectonic basin of Chew Bahir in southern Ethiopia were cored in Nov. 2014 in two boreholes down to 280 m and 260 m below surface respectively. The overlapping long cores (drilled ~20 m apart from each other), were opened, scanned, described and sampled in low resolution in April 2015. The recovered sediments mostly contain green-greyish to light coloured and brown to reddish clays and silty clays, interbedded with some laminated mica-rich sand layers and occurrences of carbonate concretions and nodules, which decrease upcore. Here we will present a first set of results on the composite core, comprising mainly lithology and magnetic susceptibility (MS). Based on known sedimentation rates from pre-studies performed on short cores across the basin, we anticipate the deep drilled cores to cover at least 500 ka BP. Moreover, new insights into the role of post-depositional alteration, especially of clay minerals and zeolites, will be presented as a contribution to an improved understanding of formation processes. The results support the identification of wet and dry climate periods in the past. Those pronounced variations of moisture availability, are thought to have influenced the evolution and mobility of Homo sapiens sapiens.

  7. Footprint Database and web services for the Herschel space observatory

    Science.gov (United States)

    Verebélyi, Erika; Dobos, László; Kiss, Csaba

    2015-08-01

    Using all telemetry and observational meta-data, we created a searchable database of Herschel observation footprints. Data from the Herschel space observatory is freely available for everyone but no uniformly processed catalog of all observations has been published yet. As a first step, we unified the data model for all three Herschel instruments in all observation modes and compiled a database of sky coverage information. As opposed to methods using a pixellation of the sphere, in our database, sky coverage is stored in exact geometric form allowing for precise area calculations. Indexing of the footprints allows for very fast search among observations based on pointing, time, sky coverage overlap and meta-data. This enables us, for example, to find moving objects easily in Herschel fields. The database is accessible via a web site and also as a set of REST web service functions which makes it usable from program clients like Python or IDL scripts. Data is available in various formats including Virtual Observatory standards.

  8. On Touristic Ecological Footprint of Macau

    Institute of Scientific and Technical Information of China (English)

    Zhang Meng; Yang Yu

    2012-01-01

    Despite its tiny territory, Macau boasts a large volume of tourist activities, which serves as the pillar of its economy. En- vironment and natural resources are the cornerstone of tourism, but are also subject to the negative impact of tourism. Based on the theory and methodology of ecological footprint analysis, this paper calculated the touristic ecological footprint and deficit of Macau in 2009, in an effort to bring to light the current status of excessive consumption of resources by tourism. As the findings show, the non-h'ansferable touristic ecological footprint and touristic ecologi- cal deficit of Macau in 2009 are respectively 18 300.891 gha and 12 737.584 gha, and the former is 3.29 times as large as the tour- istic ecological carrying capacity. Touristic ecological footprint of Macau is highly efficient in economic sense but currently tourism is developing in an unsustainable manner, so appropriate initiatives are in need to strike a balance between tourism development and resource conservation and to promote the sustainability of tourism industry of Macau.

  9. Carbon footprint as an environmental sustainability indicator for the particleboard produced in Pakistan

    International Nuclear Information System (INIS)

    Hussain, Majid; Naseem Malik, Riffat; Taylor, Adam

    2017-01-01

    This study quantified the carbon footprint of particleboard production in Pakistan using a cradle-to-gate life cycle assessment approach. The system boundary comprised raw materials acquisition, transport, particleboard manufacture and finished product distribution. Primary data were collected through surveys and meetings with particleboard manufacturers. Secondary data were taken from the literature. Greenhouse gas emissions from off-site industrial operations of the particleboard industry represented 52% of the total emissions from the production of 1.0 m 3 of particleboard in Pakistan. The on-site industrial operations cause direct greenhouse gas emissions and accounted for 48% of the total emissions. These operations included energy consumption in stationary sources, the company-owned vehicle fleet, and the distribution and marketing of the finished product. The use of natural gas combustion in the stationary and mobile sources, raw material transport and urea-formaldehyde resin production chain accounted for the highest emissions from the particleboard production chain in Pakistan. The identification of the major hotspots in the particleboard production chain can assist the wood panel industry to improve their environmental profile. More efforts are needed to investigate the urea-formaldehyde resin production chain and substitution of roundwood with wood and agri-residues to assess the potential improvements. In addition, renewable energy sources should be encouraged to avoid greenhouse gas emissions by substituting fossil energy. This study also provides a benchmark for future research work to formulate comprehensive greenhouse gas emissions reduction plans, because no previous research work is available on the carbon footprint of particleboard production in Pakistan. - Highlights: • We conducted the first carbon footprint assessment of particleboard produced in Pakistan. • System boundary comprised raw materials acquisition, particleboard manufacture and

  10. Footprinting of Chlorella virus DNA ligase bound at a nick in duplex DNA.

    Science.gov (United States)

    Odell, M; Shuman, S

    1999-05-14

    The 298-amino acid ATP-dependent DNA ligase of Chlorella virus PBCV-1 is the smallest eukaryotic DNA ligase known. The enzyme has intrinsic specificity for binding to nicked duplex DNA. To delineate the ligase-DNA interface, we have footprinted the enzyme binding site on DNA and the DNA binding site on ligase. The size of the exonuclease III footprint of ligase bound a single nick in duplex DNA is 19-21 nucleotides. The footprint is asymmetric, extending 8-9 nucleotides on the 3'-OH side of the nick and 11-12 nucleotides on the 5'-phosphate side. The 5'-phosphate moiety is essential for the binding of Chlorella virus ligase to nicked DNA. Here we show that the 3'-OH moiety is not required for nick recognition. The Chlorella virus ligase binds to a nicked ligand containing 2',3'-dideoxy and 5'-phosphate termini, but cannot catalyze adenylation of the 5'-end. Hence, the 3'-OH is important for step 2 chemistry even though it is not itself chemically transformed during DNA-adenylate formation. A 2'-OH cannot substitute for the essential 3'-OH in adenylation at a nick or even in strand closure at a preadenylated nick. The protein side of the ligase-DNA interface was probed by limited proteolysis of ligase with trypsin and chymotrypsin in the presence and absence of nicked DNA. Protease accessible sites are clustered within a short segment from amino acids 210-225 located distal to conserved motif V. The ligase is protected from proteolysis by nicked DNA. Protease cleavage of the native enzyme prior to DNA addition results in loss of DNA binding. These results suggest a bipartite domain structure in which the interdomain segment either comprises part of the DNA binding site or undergoes a conformational change upon DNA binding. The domain structure of Chlorella virus ligase inferred from the solution experiments is consistent with the structure of T7 DNA ligase determined by x-ray crystallography.

  11. Carbon footprint as an environmental sustainability indicator for the particleboard produced in Pakistan

    Energy Technology Data Exchange (ETDEWEB)

    Hussain, Majid [Environmental Biology and Ecotoxicology Laboratory, Department of Environmental Sciences, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Department of Forestry and Wildlife Management, University of Haripur, Hattar Road Haripur, 22620, Khyber Pakhtunkhwa (Pakistan); Naseem Malik, Riffat, E-mail: r_n_malik2000@yahoo.co.uk [Department of Forestry and Wildlife Management, University of Haripur, Hattar Road Haripur, 22620, Khyber Pakhtunkhwa (Pakistan); Taylor, Adam, E-mail: mtaylo29@utk.edu [Center for Renewable Carbon, Department of Forestry, Wildlife and Fisheries, University of Tennessee, Knoxville, TN 37996-4570 (United States)

    2017-05-15

    This study quantified the carbon footprint of particleboard production in Pakistan using a cradle-to-gate life cycle assessment approach. The system boundary comprised raw materials acquisition, transport, particleboard manufacture and finished product distribution. Primary data were collected through surveys and meetings with particleboard manufacturers. Secondary data were taken from the literature. Greenhouse gas emissions from off-site industrial operations of the particleboard industry represented 52% of the total emissions from the production of 1.0 m{sup 3} of particleboard in Pakistan. The on-site industrial operations cause direct greenhouse gas emissions and accounted for 48% of the total emissions. These operations included energy consumption in stationary sources, the company-owned vehicle fleet, and the distribution and marketing of the finished product. The use of natural gas combustion in the stationary and mobile sources, raw material transport and urea-formaldehyde resin production chain accounted for the highest emissions from the particleboard production chain in Pakistan. The identification of the major hotspots in the particleboard production chain can assist the wood panel industry to improve their environmental profile. More efforts are needed to investigate the urea-formaldehyde resin production chain and substitution of roundwood with wood and agri-residues to assess the potential improvements. In addition, renewable energy sources should be encouraged to avoid greenhouse gas emissions by substituting fossil energy. This study also provides a benchmark for future research work to formulate comprehensive greenhouse gas emissions reduction plans, because no previous research work is available on the carbon footprint of particleboard production in Pakistan. - Highlights: • We conducted the first carbon footprint assessment of particleboard produced in Pakistan. • System boundary comprised raw materials acquisition, particleboard

  12. Similarity analysis between chromosomes of Homo sapiens and monkeys with correlation coefficient, rank correlation coefficient and cosine similarity measures

    OpenAIRE

    Someswara Rao, Chinta; Viswanadha Raju, S.

    2016-01-01

    In this paper, we consider correlation coefficient, rank correlation coefficient and cosine similarity measures for evaluating similarity between Homo sapiens and monkeys. We used DNA chromosomes of genome wide genes to determine the correlation between the chromosomal content and evolutionary relationship. The similarity among the H. sapiens and monkeys is measured for a total of 210 chromosomes related to 10 species. The similarity measures of these different species show the relationship b...

  13. Ecological footprint and food consumption in Minna, Nigeria

    International Nuclear Information System (INIS)

    Razack, N T A A; Ludin, A N M

    2014-01-01

    Cities all over the world are growing and will continue to grow as development is tilted toward development at the expense of the rural area. As a result of this there is need for development of housing that constructed at the urban fringes. There are many tools to measure sustainability of a city and one of them is Ecological Footprint. This paper looked at the Ecological Footprint and food consumption Minna, Nigeria. The paper evaluates the effectiveness of Ecological Footprint in the context of urban development. The survey revealed that food contributed 38.77% of the Ecological Footprint of Minna. This is as a result of the lifestyle of the people. It was concluded that the Ecological Footprint of Minna (1.096gha) is lower than the national bio-capacity (1.24gha), which therefore make city sustainable. Therefore, the people of Minna have to develop a lifestyle that will be sustainable better than the present practice

  14. Carbon and environmental footprinting of global biofuel production

    OpenAIRE

    Hammond, Geoff P.; Seth, S.M.

    2013-01-01

    The carbon and environmental footprints associated with the global production of biofuels have been computed from a baseline of 2007-2009 out until 2019. Estimates of future global biofuel production were adopted from OECD-FAO and related projections. In order to determine the footprints associated with these (essentially 'first generation') biofuel resources, the overall environmental footprint was disaggregated into bioproductive land, built land, carbon, embodied energy, materials and wast...

  15. Impact of Fertilizer N Application on the Grey Water Footprint of Winter Wheat in a NW-European Temperate Climate

    Directory of Open Access Journals (Sweden)

    Holger Brueck

    2016-08-01

    Full Text Available Nutrient management is central in water footprint analyses as it exerts strong control over crop yield and potentially contributes to pollution of freshwater, the so-called grey water footprint. In the frame of grey water footprint accounting, two methods are suggested, the constant leaching fraction approach (10% of applied fertilizer N and the N surplus approach. We compared both approaches and expected that the N surplus approach gives lower estimates of N leaching (and fertilizer-induced freshwater pollution when the N surplus is small and higher N leaching estimates when the N surplus is high. We compared N fertilizer application at which the N balance = 0 with the N application at which profit is highest. We further expect pronounced differences in N surplus between farm sites and years, due to yield and soil fertility differences. N response trials were conducted at several locations over three years in Germany. Fertilizer-induced N surplus was calculated from the difference between applied N fertilizer and grain N removal. N fertilizer application at which N balance = 0 (NBal = 0 was lower than economic optimum N application rates (NEcon. N surplus at NEcon was linearly correlated with the additional N applied. Pooled over years and sites the median N surplus was 39 kg N ha−1. Differences between sites rather than between years dominated variation in fertilizer-induced N surplus. Estimated N leaching at NEcon was on average 9% of applied fertilizer N. The product water footprint was on average 180 m3 per ton of grain, but differences between sites were substantial with values varying between 0 and >400 m3 per ton. Yield and protein contents were lower at NBal = 0 compared to NEcon indicating a trade-off between freshwater protection, yield, wheat grain quality and economic optimum N application. Site-specific fertilizer strategies which consider soil type, crop development, annual field water balance, in-season nutrient dynamics and

  16. Trends and Consumption Structures of China’s Blue and Grey Water Footprint

    Directory of Open Access Journals (Sweden)

    Huixiao Wang

    2018-04-01

    Full Text Available Water footprint has become a common method to study the water resources utilization in recent years. By using input–output analysis and dilution theory, the internal water footprint, blue water footprint and grey water footprint of China from 2002 to 2012 were estimated, and the consumption structure of water footprint and virtual water trade were analyzed. The results show: (1 From 2002 to 2012, the average annual internal water footprint was 3.83 trillion m3 in China, of which the blue water footprint was 0.25 trillion m3, and the grey water footprint was 3.58 trillion m3 (with Grade III water standard accounting; both the internal water footprint and grey water footprint experienced decreasing trends from 2002 to 2012, except for a dramatic increase in 2010; (2 Average annual virtual blue water footprint was the greatest in agriculture (39.2%, while tertiary industry (27.5% and food and tobacco processing (23.7% were the top two highest for average annual virtual grey water footprint; (3 Virtual blue water footprint in most sectors showed increasing trends due to the increase of final demand, while virtual grey water footprint in most sectors showed decreasing trends due to the decreases of total return water coefficients and conversion coefficients of virtual grey water footprint; (4 For water resources, China was self-reliant: the water used for producing the products and services to meet domestic consumption was taken domestically; meanwhile, China exported virtual water to other countries, which aggravated the water stress in China.

  17. Spatially Explicit Analysis of Water Footprints in the UK

    Directory of Open Access Journals (Sweden)

    John Barrett

    2010-12-01

    Full Text Available The Water Footprint, as an indicator of water consumption has become increasingly popular for analyzing environmental issues associated with the use of water resources in the global supply chain of consumer goods. This is particularly relevant for countries like the UK, which increasingly rely on products produced elsewhere in the world and thus impose pressures on foreign water resources. Existing studies calculating water footprints are mostly based on process analysis, and results are mainly available at the national level. The current paper assesses the domestic and foreign water requirements for UK final consumption by applying an environmentally extended multi-regional input-output model in combination with geo-demographic consumer segmentation data. This approach allows us to calculate water footprints (both direct and indirect for different products as well as different geographies within the UK. We distinguished between production and consumption footprints where the former is the total water consumed from the UK domestic water resources by the production activities in the UK and the latter is the total water consumed from both domestic and global water resources to satisfy the UK domestic final consumption. The results show that the production water footprint is 439 m3/cap/year, 85% of which is for the final consumption in the UK itself. The average consumption water footprint of the UK is more than three times bigger than the UK production water footprint in 2006. About half of the UK consumption water footprints were associated with imports from Non-OECD countries (many of which are water-scarce, while around 19% were from EU-OECD countries, and only 3% from Non-EU-OECD countries. We find that the water footprint differs considerably across sub-national geographies in the UK, and the differences are as big as 273 m3/cap/year for the internal water footprint and 802 m3/cap/year for the external water footprint. Our results suggest

  18. Place oriented ecological footprint analysis. The case of Israel's grain supply

    International Nuclear Information System (INIS)

    Kissinger, Meidad; Gottlieb, Dan

    2010-01-01

    In today's world, any nation's ecological footprint is spread all over the globe. Still, most footprint studies are not yet sensitive to the specific locations on which the footprint falls and to the unique production characteristics of each supporting region. In recent years some studies have acknowledged the need to quantify the 'real land' footprints and particularly the share of the footprint embodied in trade. Our goal is to analyse the ecological footprint of grain-based consumption in the state of Israel during the last two decades. We present a detailed, place oriented calculation procedure of Israel's grain footprint on specific locations around the world. We document modes of production, major energy inputs in specific sources of supply, the energy required for shipping from each source, and the CO 2 emissions from those operations. Our research reveals that most of Israel's grain footprint falls on North America followed by the Black Sea region. It also shows that while the overall consumption of grain products has increased throughout the research period, the size of the footprint has been dropping in recent years as a consequence of changing sources of supply and grain composition. Finally, we discuss some of the implications of the method presented here for future footprint calculations and environmental resource management. (author)

  19. Water footprinting of dairy farming in Ireland

    NARCIS (Netherlands)

    Murphy, E.; Boer, de I.J.M.; Middelaar, van C.E.; Holden, N.M.; Shalloo, L.; Curran, T.P.; Upton, J.

    2017-01-01

    In the context of global water scarcity, water footprints have become an important sustainability indicator for food production systems. To improve the water footprint of the dairy sector, insight into freshwater consumption of individual farms is required. The objective of this study was to

  20. Green Remediation Best Management Practices: Site Investigation

    Science.gov (United States)

    The U.S. EPA Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site and conducting site investigation.

  1. The impact of electricity consumption on CO2 emission, carbon footprint, water footprint and ecological footprint: The role of hydropower in an emerging economy.

    Science.gov (United States)

    Bello, Mufutau Opeyemi; Solarin, Sakiru Adebola; Yen, Yuen Yee

    2018-08-01

    The primary objective of this paper is to investigate the isolated impacts of hydroelectricity consumption on the environment in Malaysia as an emerging economy. We use four different measures of environmental degradation including ecological footprint, carbon footprint, water footprint and CO 2 emission as target variables, while controlling for GDP, GDP square and urbanization for the period 1971 to 2016. A recently introduced unit root test with breaks is utilized to examine the stationarity of the series and the bounds testing approach to cointegration is used to probe the long run relationships between the variables. VECM Granger causality technique is employed to examine the long-run causal dynamics between the variables. Sensitivity analysis is conducted by further including fossil fuels in the equations. The results show evidence of an inverted U-shaped relationship between environmental degradation and real GDP. Hydroelectricity is found to significantly reduce environmental degradation while urbanization is also not particularly harmful on the environment apart from its effect on air pollution. The VECM Granger causality results show evidence of unidirectional causality running from hydroelectricity and fossil fuels consumption to all measures of environmental degradation and real GDP per capita. There is evidence of feedback hypothesis between real GDP to all environmental degradation indices. The inclusion of fossil fuel did not change the behavior of hydroelectricity on the environment but fossil fuels significantly increase water footprint. Copyright © 2018 Elsevier Ltd. All rights reserved.

  2. ADDRESSING WATER FOOTPRINT CONCEPT: A DEMONSTRABLE STRATEGY FOR PAPERMAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Jing Shen,

    2012-05-01

    Full Text Available Since the introduction of the water footprint concept in 2002, in the context of humankind’s ever-increasing awareness of the valuable global freshwater resources, it has received more and more attention. The application of this relatively new concept has been expected to provide ecological and environmental benefits. For the water-intensive papermaking industry, it seems that water footprint needs to be addressed. The water footprint of cellulosic paper can be divided into three components, including its green water footprint, blue water footprint, and grey water footprint, which may be accounted for by considering the individual contributions of wood or non-wood materials, pulp production processes, effluent discharge to the receiving water bodies, process chemicals and additives, energy consumption, etc. In the literature, the accounting of water footprint during the whole production chain of cellulosic paper is already available, and relevant research findings can provide useful insights into the application of the concept; however, further development of the accounting methodologies is much needed, so that the quantitative and qualitative evaluation of water footprint can be internationally recognized, certified, and standardized. Although there are ongoing or upcoming debates and challenges associated with the concept, its application to papermaking industry may be expected to provide various encouraging possibilities and impacts.

  3. Product carbon footprints and their uncertainties in comparative decision contexts.

    Directory of Open Access Journals (Sweden)

    Patrik J G Henriksson

    Full Text Available In response to growing awareness of climate change, requests to establish product carbon footprints have been increasing. Product carbon footprints are life cycle assessments restricted to just one impact category, global warming. Product carbon footprint studies generate life cycle inventory results, listing the environmental emissions of greenhouse gases from a product's lifecycle, and characterize these by their global warming potentials, producing product carbon footprints that are commonly communicated as point values. In the present research we show that the uncertainties surrounding these point values necessitate more sophisticated ways of communicating product carbon footprints, using different sizes of catfish (Pangasius spp. farms in Vietnam as a case study. As most product carbon footprint studies only have a comparative meaning, we used dependent sampling to produce relative results in order to increase the power for identifying environmentally superior products. We therefore argue that product carbon footprints, supported by quantitative uncertainty estimates, should be used to test hypotheses, rather than to provide point value estimates or plain confidence intervals of products' environmental performance.

  4. Self-domestication in Homo sapiens: Insights from comparative genomics.

    Science.gov (United States)

    Theofanopoulou, Constantina; Gastaldon, Simone; O'Rourke, Thomas; Samuels, Bridget D; Messner, Angela; Martins, Pedro Tiago; Delogu, Francesco; Alamri, Saleh; Boeckx, Cedric

    2017-01-01

    This study identifies and analyzes statistically significant overlaps between selective sweep screens in anatomically modern humans and several domesticated species. The results obtained suggest that (paleo-)genomic data can be exploited to complement the fossil record and support the idea of self-domestication in Homo sapiens, a process that likely intensified as our species populated its niche. Our analysis lends support to attempts to capture the "domestication syndrome" in terms of alterations to certain signaling pathways and cell lineages, such as the neural crest.

  5. Assessing Water and Carbon Footprints for Sustainable Water Resource Management

    Science.gov (United States)

    The key points of this presentation are: (1) Water footprint and carbon footprint as two sustainability attributes in adaptations to climate and socioeconomic changes, (2) Necessary to evaluate carbon and water footprints relative to constraints in resource capacity, (3) Critical...

  6. Double-counting in supply chain carbon footprinting

    NARCIS (Netherlands)

    Caro, F.; Corbett, C.J.; Tan, T.; Zuidwijk, R.A.

    2013-01-01

    Carbon footprinting is a tool for firms to determine the total greenhouse gas (GHG) emissions associated with their supply chain or with a unit of final product or service. Carbon footprinting typically aims to identify where best to invest in emission reduction efforts, and/or to determine the

  7. Water footprint assessment of oil palm in Malaysia: A preliminary study

    Science.gov (United States)

    Muhammad-Muaz, A.; Marlia, M. H.

    2014-09-01

    This study evaluates the water footprint of growing oil palm in Malaysia based on the water footprint method. The crop water use was determined using the CROPWAT 8.0 model developed by the Land and Water Development Division of FAO. The total water footprint for growing oil palm is 243 m3/ton. The result of this study showed that the green water footprint is 1.5 orders of magnitude larger compared to the blue water footprint. Besides providing updated status of total water used from the oil palm plantation, our result also shows that this baseline information helps in identifying which areas need to be conserved and what type of recommendation that should be drawn. As the results of the water footprint can differ between locations, the inclusion of local water stress index should be considered in the calculation of water footprint.

  8. The nitrogen footprint tool network: a multi-institution program ...

    Science.gov (United States)

    Anthropogenic sources of reactive nitrogen have local and global impacts on air and water quality and detrimental effects on human and ecosystem health. This paper uses the nitrogen footprint tool (NFT) to determine the amount of nitrogen (N) released as a result of institutional consumption. The sectors accounted for include food (consumption and the upstream production), energy, transportation, fertilizer, research animals, and agricultural research. The NFT is then used for scenario analysis to manage and track reductions to institution N footprints, which are driven by the consumption behaviors of both the institution itself and its constituent individuals. In this paper, the first seven institution N footprint results are presented. The institution NFT network aims to develop footprints for many institutions to encourage widespread upper-level management strategies that will create significant reductions in reactive N released to the environment. Energy use and food purchases are the two largest contributors to institution N footprints. Ongoing efforts by institutions to reduce greenhouse gas emissions also help to reduce the N footprint, but the impact of food production on N pollution has not been directly addressed by the higher-ed sustainability community. The NFT Network found that institutions could reduce their N footprints by optimizing food purchasing to reduce consumption of animal products and minimize food waste, as well as reducing dependence o

  9. The mitogenome of a 35,000-year-old Homo sapiens from Europe supports a Palaeolithic back-migration to Africa

    OpenAIRE

    Hervella, M.; Svensson, E. M.; Alberdi, A.; G?nther, T.; Izagirre, N.; Munters, A. R.; Alonso, S.; Ioana, M.; Ridiche, F.; Soficaru, A.; Jakobsson, M.; Netea, M. G.; de-la-Rua, C.

    2016-01-01

    After the dispersal of modern humans (Homo sapiens) Out of Africa, hominins with a similar morphology to that of present-day humans initiated the gradual demographic expansion into Eurasia. The mitogenome (33-fold coverage) of the Pestera Muierii 1 individual (PM1) from Romania (35 ky cal BP) we present in this article corresponds fully to Homo sapiens, whilst exhibiting a mosaic of morphological features related to both modern humans and Neandertals. We have identified the PM1 mitogenome as ...

  10. Water Footprint and Land Requirement of Solar Thermochemical Jet-Fuel Production.

    Science.gov (United States)

    Falter, Christoph; Pitz-Paal, Robert

    2017-11-07

    The production of alternative fuels via the solar thermochemical pathway has the potential to provide supply security and to significantly reduce greenhouse gas emissions. H 2 O and CO 2 are converted to liquid hydrocarbon fuels using concentrated solar energy mediated by redox reactions of a metal oxide. Because attractive production locations are in arid regions, the water footprint and the land requirement of this fuel production pathway are analyzed. The water footprint consists of 7.4 liters per liter of jet fuel of direct demand on-site and 42.4 liters per liter of jet fuel of indirect demand, where the dominant contributions are the mining of the rare earth oxide ceria, the manufacturing of the solar concentration infrastructure, and the cleaning of the mirrors. The area-specific productivity is found to be 33 362 liters per hectare per year of jet fuel equivalents, where the land coverage is mainly due to the concentration of solar energy for heat and electricity. The water footprint and the land requirement of the solar thermochemical fuel pathway are larger than the best power-to-liquid pathways but an order of magnitude lower than the best biomass-to-liquid pathways. For the production of solar thermochemical fuels arid regions are best-suited, and for biofuels regions of a moderate and humid climate.

  11. The carbon footprint of an Australian satellite haemodialysis unit.

    Science.gov (United States)

    Lim, Allan E K; Perkins, Anthony; Agar, John W M

    2013-06-01

    This study aimed to better understand the carbon emission impact of haemodialysis (HD) throughout Australia by determining its carbon footprint, the relative contributions of various sectors to this footprint, and how contributions from electricity and water consumption are affected by local factors. Activity data associated with HD provision at a 6-chair suburban satellite HD unit in Victoria in 2011 was collected and converted to a common measurement unit of tonnes of CO2 equivalents (t CO2-eq) via established emissions factors. For electricity and water consumption, emissions factors for other Australian locations were applied to assess the impact of local factors on these footprint contributors. In Victoria, the annual per-patient carbon footprint of satellite HD was calculated to be 10.2t CO2-eq. The largest contributors were pharmaceuticals (35.7%) and medical equipment (23.4%). Throughout Australia, the emissions percentage attributable to electricity consumption ranged from 5.2% to 18.6%, while the emissions percentage attributable to water use ranged from 4.0% to 11.6%. State-by-state contributions of energy and water use to the carbon footprint of satellite HD appear to vary significantly. Performing emissions planning and target setting at the state level may be more appropriate in the Australian context. What is known about the topic? Healthcare provision carries a significant environmental footprint. In particular, conventional HD uses substantial amounts of electricity and water. In the UK, provision of HD and peritoneal dialysis was found to have an annual per-patient carbon footprint of 7.1t CO2-eq. What does this paper add? This is the first carbon-footprinting study of HD in Australia. In Victoria, the annual per-patient carbon footprint of satellite conventional HD is 10.2t CO2-eq. Notably, the contributions of electricity and water consumption to the carbon footprint varies significantly throughout Australia when local factors are taken into

  12. Prediction of host - pathogen protein interactions between Mycobacterium tuberculosis and Homo sapiens using sequence motifs.

    Science.gov (United States)

    Huo, Tong; Liu, Wei; Guo, Yu; Yang, Cheng; Lin, Jianping; Rao, Zihe

    2015-03-26

    Emergence of multiple drug resistant strains of M. tuberculosis (MDR-TB) threatens to derail global efforts aimed at reigning in the pathogen. Co-infections of M. tuberculosis with HIV are difficult to treat. To counter these new challenges, it is essential to study the interactions between M. tuberculosis and the host to learn how these bacteria cause disease. We report a systematic flow to predict the host pathogen interactions (HPIs) between M. tuberculosis and Homo sapiens based on sequence motifs. First, protein sequences were used as initial input for identifying the HPIs by 'interolog' method. HPIs were further filtered by prediction of domain-domain interactions (DDIs). Functional annotations of protein and publicly available experimental results were applied to filter the remaining HPIs. Using such a strategy, 118 pairs of HPIs were identified, which involve 43 proteins from M. tuberculosis and 48 proteins from Homo sapiens. A biological interaction network between M. tuberculosis and Homo sapiens was then constructed using the predicted inter- and intra-species interactions based on the 118 pairs of HPIs. Finally, a web accessible database named PATH (Protein interactions of M. tuberculosis and Human) was constructed to store these predicted interactions and proteins. This interaction network will facilitate the research on host-pathogen protein-protein interactions, and may throw light on how M. tuberculosis interacts with its host.

  13. An Integrated Tool for Calculating and Reducing Institution Carbon and Nitrogen Footprints

    Science.gov (United States)

    Galloway, James N.; Castner, Elizabeth A.; Andrews, Jennifer; Leary, Neil; Aber, John D.

    2017-01-01

    Abstract The development of nitrogen footprint tools has allowed a range of entities to calculate and reduce their contribution to nitrogen pollution, but these tools represent just one aspect of environmental pollution. For example, institutions have been calculating their carbon footprints to track and manage their greenhouse gas emissions for over a decade. This article introduces an integrated tool that institutions can use to calculate, track, and manage their nitrogen and carbon footprints together. It presents the methodology for the combined tool, describes several metrics for comparing institution nitrogen and carbon footprint results, and discusses management strategies that reduce both the nitrogen and carbon footprints. The data requirements for the two tools overlap substantially, although integrating the two tools does necessitate the calculation of the carbon footprint of food. Comparison results for five institutions suggest that the institution nitrogen and carbon footprints correlate strongly, especially in the utilities and food sectors. Scenario analyses indicate benefits to both footprints from a range of utilities and food footprint reduction strategies. Integrating these two footprints into a single tool will account for a broader range of environmental impacts, reduce data entry and analysis, and promote integrated management of institutional sustainability. PMID:29350217

  14. Ecological Footprint in relation to Climate Change Strategy in Cities

    Science.gov (United States)

    Belčáková, Ingrid; Diviaková, Andrea; Belaňová, Eliška

    2017-10-01

    Ecological footprint determines how much natural resources are consumed by an individual, city, region, state or all inhabitants of our planet in order to ensure their requirements and needs. It includes all activities, from food consumption, housing, transport to waste produced and allows us to compare particular activities and their impacts on the environment and natural resources. Ecological footprint is important issue for making sustainable development concept more popular using simplifications, which provide the public with basic information on situation on our planet. Today we know calculations of global (worldwide), national and local ecological footprints. During our research in cities, we were concentrated on calculation of city’s ecological footprint. The article tries to outline theoretical and assumptions and practical results of climate change consequences in cities of Bratislava and Nitra (Slovakia), to describe potential of mitigating adverse impacts of climate change and to provide information for general and professional public on theoretical assumptions in calculating ecological footprint. The intention is to present innovation of ecological footprint calculation, taking into consideration ecological stability of a city (with a specific focus on micro-climate functions of green areas). Present possibilities to reduce ecological footprint are presented.

  15. promoting sustainability by curtailing ecological footprints of

    African Journals Online (AJOL)

    The need to regulate land use and the exploitation of natural resources has led to the concept of sustainability, and by extension, ecological footprint (the total amount of land required by an individual to grow his/her needs). This paper examines ecological footprint savings in urban growth and housing development in ...

  16. Homo sapiens, Homo neanderthalensis and the Denisova specimen: New insights on their evolutionary histories using whole-genome comparisons.

    Science.gov (United States)

    Paixão-Côrtes, Vanessa Rodrigues; Viscardi, Lucas Henrique; Salzano, Francisco Mauro; Hünemeier, Tábita; Bortolini, Maria Cátira

    2012-12-01

    After a brief review of the most recent findings in the study of human evolution, an extensive comparison of the complete genomes of our nearest relative, the chimpanzee (Pan troglodytes), of extant Homo sapiens, archaic Homo neanderthalensis and the Denisova specimen were made. The focus was on non-synonymous mutations, which consequently had an impact on protein levels and these changes were classified according to degree of effect. A total of 10,447 non-synonymous substitutions were found in which the derived allele is fixed or nearly fixed in humans as compared to chimpanzee. Their most frequent location was on chromosome 21. Their presence was then searched in the two archaic genomes. Mutations in 381 genes would imply radical amino acid changes, with a fraction of these related to olfaction and other important physiological processes. Eight new alleles were identified in the Neanderthal and/or Denisova genetic pools. Four others, possibly affecting cognition, occured both in the sapiens and two other archaic genomes. The selective sweep that gave rise to Homo sapiens could, therefore, have initiated before the modern/archaic human divergence.

  17. Improved analyses of human mtDNA sequences support a recent African origin for Homo sapiens.

    Science.gov (United States)

    Penny, D; Steel, M; Waddell, P J; Hendy, M D

    1995-09-01

    New quantitative methods are applied to the 135 human mitochondrial sequences from the Vigilant et al. data set. General problems in analyzing large numbers of short sequences are discussed, and an improved strategy is suggested. A key feature is to focus not on individual trees but on the general "landscape" of trees. Over 1,000 searches were made from random starting trees with only one tree (a local optimum) being retained each time, thereby ensuring optima were found independently. A new tree comparison metric was developed that is unaffected by rearrangements of trees around many very short internal edges. Use of this metric showed that downweighting hypervariable sites revealed more evolutionary structure than studies that weighted all sites equally. Our results are consistent with convergence toward a global optimum. Crucial features are that the best optima show very strong regional differentiation, a common group of 49 African sequences is found in all the best optima, and the best optima contain the 16 !Kung sequences in a separate group of San people. The other 86 sequences form a heterogeneous mixture of Africans, Europeans, Australopapuans, and Asians. Thus all major human lineages occur in Africa, but only a subset occurs in the rest of the world. The existence of these African-only groups strongly contradicts multiregional theories for the origin of Homo sapiens that require widespread migration and interbreeding over the entire range of H. erectus. Only when the multiregional model is rejected is it appropriate to consider the root, based on a single locus, to be the center of origin of a population (otherwise different loci could give alternative geographic positions for the root). For this data, several methods locate the root within the group of 49 African sequences and are thus consistent with the recent African origin of H. sapiens. We demonstrate that the time of the last common ancestor cannot be the time of major expansion in human numbers

  18. Inter- and Intraspecific Variations in the Pectoral Muscles of Common Chimpanzees (Pan troglodytes), Bonobos (Pan paniscus), and Humans (Homo sapiens)

    OpenAIRE

    Potau, J. M.; Arias-Martorell, J.; Bello-Hellegouarch, G.; Casado, A.; Pastor, J. F.; de Paz, F.; Diogo, R.

    2018-01-01

    We have analyzed anatomic variations in the pectoralis major and pectoralis minor muscles of common chimpanzees (Pan\\ud troglodytes) and bonobos(Pan paniscus) and compared them to anatomic variations in these muscles in humans(Homo sapiens). We\\ud have macroscopically dissected these muscles in six adult Pan troglodytes, five Pan paniscus of ages ranging from fetus to adult, and\\ud five adult Homo sapiens. Although Pan troglodytes are thought to lack a separate pectoralis abdominis muscle, we...

  19. Bivariate Genomic Footprinting Detects Changes in Transcription Factor Activity

    Directory of Open Access Journals (Sweden)

    Songjoon Baek

    2017-05-01

    Full Text Available In response to activating signals, transcription factors (TFs bind DNA and regulate gene expression. TF binding can be measured by protection of the bound sequence from DNase digestion (i.e., footprint. Here, we report that 80% of TF binding motifs do not show a measurable footprint, partly because of a variable cleavage pattern within the motif sequence. To more faithfully portray the effect of TFs on chromatin, we developed an algorithm that captures two TF-dependent effects on chromatin accessibility: footprinting and motif-flanking accessibility. The algorithm, termed bivariate genomic footprinting (BaGFoot, efficiently detects TF activity. BaGFoot is robust to different accessibility assays (DNase-seq, ATAC-seq, all examined peak-calling programs, and a variety of cut bias correction approaches. BaGFoot reliably predicts TF binding and provides valuable information regarding the TFs affecting chromatin accessibility in various biological systems and following various biological events, including in cases where an absolute footprint cannot be determined.

  20. Heel–Ball index: An analysis of footprint dimensions for determination of sex

    Directory of Open Access Journals (Sweden)

    Tanuj Kanchan

    2014-06-01

    Full Text Available Determination of sex from the footprints recovered at crime scenes can help the investigation by narrowing down the pool of possible suspects. The present research studies the dimensions of the heel and the ball in footprints, and derives the Heel–Ball (HB index from these foot dimensions with the aim to find out if the foot dimensions and the HB index exhibit sexual dimorphisms. The study was carried out on 100 individuals (50 males, 50 females of Indian origin. Footprints were obtained from both feet of the study participants using standard techniques. Thus, a total of 200 footprints were obtained. The breadth of the footprint at ball (BBAL and the breadth of the footprint at heel (BHEL were measured on the footprints. The HB index was derived as (BHEL ÷ BBAL × 100. The footprint measurements at the ball and heel were significantly larger in males on both the sides. Likewise, the derived HB index was larger in males in both feet, but the sex differences were not statistically significant. The study concludes that though footprint dimensions can be used in the determination of sex, the HB index may not be utilized in sex determination from footprints.

  1. Resource Footprints are Good Proxies of Environmental Damage

    NARCIS (Netherlands)

    Steinmann, Z.J.N.; Schipper, A.M.; Hauck, M.; Giljum, S.; Wernet, G.; Huijbregts, M.A.J.

    2017-01-01

    Environmental footprints are increasingly used to quantify and compare environmental impacts of for example products, technologies, households, or nations. This has resulted in a multitude of footprint indicators, ranging from relatively simple measures of resource use (water, energy, materials) to

  2. Carbon footprint: a head-teaser

    International Nuclear Information System (INIS)

    Chandes, C.; Cahuzac, A.; Deniel, P.

    2011-01-01

    The author outlines the difficulties faced by industries to assess the impact of their activities on the environment, and more particularly their carbon footprint which is to be reduced, as well as greenhouse gas emissions. One of these difficulties for these companies is to choose among many methods and service providers to perform this carbon footprint assessment. Even if the result of this assessment could therefore be a matter of discussion, some companies may use this assessment as a marketing tool, whereas the ADEME notices that many requirements in terms of emission reduction actions are not met

  3. Mathematical Footprints Discovering Mathematics Everywhere

    CERN Document Server

    Pappas, Theoni

    1999-01-01

    MATHEMATICAL FOOTPRINTS takes a creative look at the role mathematics has played since prehistoric times, and will play in the future, and uncovers mathematics where you least expect to find it from its many uses in medicine, the sciences, and its appearance in art to its patterns in nature and its central role in the development of computers. Pappas presents mathematical ideas in a readable non-threatening manner. MATHEMATICAL FOOTPRINTS is another gem by the creator of THE MATHEMATICS CALENDAR and author of THE JOY OF MATHEMATICS. "Pappas's books have been gold mines of mathematical ent

  4. ESTIMATING WATER FOOTPRINT AND MANAGING BIOREFINERY WASTEWATER IN THE PRODUCTION OF BIO-BASED RENEWABLE DIESEL BLENDSTOCK

    Energy Technology Data Exchange (ETDEWEB)

    Wu, May M. [Argonne National Lab. (ANL), Argonne, IL (United States); Sawyer, Bernard M [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-12-01

    This analysis covers the entire biorefinery operation. The study focuses on net water consumed for the production of a unit of biofuel: blue, green, and grey water footprint. Blue water is defined as the water consumed in the biorefinery that is withdrawn from surface and ground water. Blue water footprint includes enzyme cultivation, pretreatment, hydrolysis, bioreactor, cooling system, boiler, fuel upgrading, combustor track, and on-site WWT. Grey water is defined as wastewater generated from the biorefinery and was evaluated based on the wastewater treatment plant design. Green water, defined as rainwater consumed for the production, is not required in the RDB process. Approximately 7–15 gal of water are required to produce a gallon of RDB when corn stover or non-irrigated perennial grasses, switchgrass and Miscanthus x giganteus (Miscanthus), serve as the feedstock in the contiguous United States. Bioelectricity generation from the biorefinery resulted in a net water credit, which reduced the water footprint. The life cycle grey water footprint for nitrogen is primarily from nitrogen in the feedstock production stage because no wastewater is discharged into the environment in the RDB process. Perennial grasses-based RDB production shows a promising grey water footprint, while corn stover-based RDB production has a relatively low green water footprint. Results from the study can help improve our understanding of the water sustainability of advanced biofuel technology under development. Make-up water for cooling and boiling remains a major demand in the biorefinery. The work revealed a key issue or trade-off between achieving zero liquid discharge to maximize water resource use and potentially increasing cost of fuel production. Solid waste disposal was identified as a management issue, and its inverse relationship with wastewater management could affect economic sustainability.

  5. Cooperative water network system to reduce carbon footprint.

    Science.gov (United States)

    Lim, Seong-Rin; Park, Jong Moon

    2008-08-15

    Much effort has been made in reducing the carbon footprint to mitigate climate change. However, water network synthesis has been focused on reducing the consumption and cost of freshwater within each industrial plant. The objective of this study is to illustrate the necessity of the cooperation of industrial plants to reduce the total carbon footprint of their water supply systems. A mathematical optimization model to minimize global warming potentials is developed to synthesize (1) a cooperative water network system (WNS) integrated over two plants and (2) an individual WNS consisting of two WNSs separated for each plant. The cooperative WNS is compared to the individual WNS. The cooperation reduces their carbon footprint and is economically feasible and profitable. A strategy for implementing the cooperation is suggested for the fair distribution of costs and benefits. As a consequence, industrial plants should cooperate with their neighbor plants to further reduce the carbon footprint.

  6. Water footprint, extended water footprint and virtual water trade of the Cantabria region, Spain. A critical appraisal of results, uncertainties and methods.

    Science.gov (United States)

    Diaz-Alcaide, Silvia; Martinez-Santos, Pedro; Willaarts, Barbara; Hernández-Moreno, Enrique; Llamas, M. Ramon

    2015-04-01

    Water footprint assessments have gradually gained recognition as valuable tools for water management, to the point that they have been officially incorporated to water planning in countries such as Spain. Adequate combinations of the virtual water and water footprint concepts present the potential to link a broad range of sectors and issues, thus providing appropriate frameworks to support optimal water allocation and to inform production and trade decisions from the water perspective. We present the results of a regional study carried out in Cantabria, a 5300 km2 autonomous region located in northern Spain. Our approach deals with the municipal, shire and regional scales, combining different methods to assess each of the main components of Cantabria's water footprint (agriculture, livestock, forestry, industry, mining, tourism, domestic use and reservoirs), as well as exploring the significance of different approaches, assumptions and databases in the overall outcomes. The classic water footprint method is coupled with extended water footprint analyses in order to provide an estimate of the social and economic value of each sector. Finally, virtual water imports and exports are computed between Cantabria and the rest of Spain and between Cantabria and the world. The outcome of our work (a) highlights the paramount importance of green water (mostly embedded in pastures) in the region's water footprint and virtual water exports; (b) establishes the role of the region as a net virtual water exporter; (c) shows the productivity of water (euro/m3 and jobs/m3) to be highest in tourism and lowest in agriculture and livestock; and (d) demonstrates that statistical databases are seldom compiled with water footprint studies in mind, which is likely to introduce uncertainties in the results. Although our work shows that there is still plenty of room for improvement in regional-scale water footprint assessments, we contend that the available information is sufficient to

  7. SAPIENS: Spreading Activation Processor for Information Encoded in Network Structures. Technical Report No. 296.

    Science.gov (United States)

    Ortony, Andrew; Radin, Dean I.

    The product of researchers' efforts to develop a computer processor which distinguishes between relevant and irrelevant information in the database, Spreading Activation Processor for Information Encoded in Network Structures (SAPIENS) exhibits (1) context sensitivity, (2) efficiency, (3) decreasing activation over time, (4) summation of…

  8. Sustainable Colombia : A Comprehensive Colombian Footprint Review

    OpenAIRE

    Brad Ewing

    2010-01-01

    During the past several months, the Ministry of Environment, Housing and Territorial Development of Colombia has been researching potential indicators that would be useful to assess and possibly adopt among which included the ecological footprint. This work was commissioned in order to provide the Ministry with a deeper understanding of the ecological footprint and to train a number of its...

  9. Emergence of a Homo sapiens-specific gene family and chromosome 16p11.2 CNV susceptibility.

    Science.gov (United States)

    Nuttle, Xander; Giannuzzi, Giuliana; Duyzend, Michael H; Schraiber, Joshua G; Narvaiza, Iñigo; Sudmant, Peter H; Penn, Osnat; Chiatante, Giorgia; Malig, Maika; Huddleston, John; Benner, Chris; Camponeschi, Francesca; Ciofi-Baffoni, Simone; Stessman, Holly A F; Marchetto, Maria C N; Denman, Laura; Harshman, Lana; Baker, Carl; Raja, Archana; Penewit, Kelsi; Janke, Nicolette; Tang, W Joyce; Ventura, Mario; Banci, Lucia; Antonacci, Francesca; Akey, Joshua M; Amemiya, Chris T; Gage, Fred H; Reymond, Alexandre; Eichler, Evan E

    2016-08-11

    Genetic differences that specify unique aspects of human evolution have typically been identified by comparative analyses between the genomes of humans and closely related primates, including more recently the genomes of archaic hominins. Not all regions of the genome, however, are equally amenable to such study. Recurrent copy number variation (CNV) at chromosome 16p11.2 accounts for approximately 1% of cases of autism and is mediated by a complex set of segmental duplications, many of which arose recently during human evolution. Here we reconstruct the evolutionary history of the locus and identify bolA family member 2 (BOLA2) as a gene duplicated exclusively in Homo sapiens. We estimate that a 95-kilobase-pair segment containing BOLA2 duplicated across the critical region approximately 282 thousand years ago (ka), one of the latest among a series of genomic changes that dramatically restructured the locus during hominid evolution. All humans examined carried one or more copies of the duplication, which nearly fixed early in the human lineage--a pattern unlikely to have arisen so rapidly in the absence of selection (P sapiens-specific duplication. In summary, the duplicative transposition of BOLA2 at the root of the H. sapiens lineage about 282 ka simultaneously increased copy number of a gene associated with iron homeostasis and predisposed our species to recurrent rearrangements associated with disease.

  10. Three-dimensional analysis of elbow soft tissue footprints and anatomy.

    Science.gov (United States)

    Capo, John T; Collins, Christopher; Beutel, Bryan G; Danna, Natalie R; Manigrasso, Michaele; Uko, Linda A; Chen, Linda Y

    2014-11-01

    Tendinous and ligamentous injuries commonly occur in the elbow. This study characterized the location, surface areas, and origin and insertional footprints of major elbow capsuloligamentous and tendinous structures in relation to bony landmarks with the use of a precision 3-dimensional modeling system. Nine unpaired cadaveric elbow specimens were dissected and mounted on a custom jig. Mapping of the medial collateral ligament (MCL), lateral ulnar collateral ligament (LUCL), triceps, biceps, brachialis, and capsular reflections was then performed with 3-dimensional digitizing technology. The location, surface areas, and footprints of the soft tissues were calculated. The MCL had a mean origin (humeral) footprint of 216 mm(2), insertional footprint of 154 mm(2), and surface area of 421 mm(2). The LUCL had a mean origin footprint of 136 mm(2), an insertional footprint of 142 mm(2), and a surface area of 532 mm(2). Of the tendons, the triceps maintained the largest insertional footprint, followed by the brachialis and the biceps (P anatomy of key elbow capsuloligamentous and tendinous structures is crucial for effective reconstruction after bony or soft tissue trauma. This study provides the upper extremity surgeon with information that may aid in restoring elbow biomechanics and preserving range of motion in these patients. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  11. A spatially detailed blue water footprint of the United States economy

    Science.gov (United States)

    Rushforth, Richard R.; Ruddell, Benjamin L.

    2018-05-01

    This paper quantifies and maps a spatially detailed and economically complete blue water footprint for the United States, utilizing the National Water Economy Database version 1.1 (NWED). NWED utilizes multiple mesoscale (county-level) federal data resources from the United States Geological Survey (USGS), the United States Department of Agriculture (USDA), the US Energy Information Administration (EIA), the US Department of Transportation (USDOT), the US Department of Energy (USDOE), and the US Bureau of Labor Statistics (BLS) to quantify water use, economic trade, and commodity flows to construct this water footprint. Results corroborate previous studies in both the magnitude of the US water footprint (F) and in the observed pattern of virtual water flows. Four virtual water accounting scenarios were developed with minimum (Min), median (Med), and maximum (Max) consumptive use scenarios and a withdrawal-based scenario. The median water footprint (FCUMed) of the US is 181 966 Mm3 (FWithdrawal: 400 844 Mm3; FCUMax: 222 144 Mm3; FCUMin: 61 117 Mm3) and the median per capita water footprint (F'CUMed) of the US is 589 m3 per capita (F'Withdrawal: 1298 m3 per capita; F'CUMax: 720 m3 per capita; F'CUMin: 198 m3 per capita). The US hydroeconomic network is centered on cities. Approximately 58 % of US water consumption is for direct and indirect use by cities. Further, the water footprint of agriculture and livestock is 93 % of the total US blue water footprint, and is dominated by irrigated agriculture in the western US. The water footprint of the industrial, domestic, and power economic sectors is centered on population centers, while the water footprint of the mining sector is highly dependent on the location of mineral resources. Owing to uncertainty in consumptive use coefficients alone, the mesoscale blue water footprint uncertainty ranges from 63 to over 99 % depending on location. Harmonized region-specific, economic-sector-specific consumption coefficients are

  12. The carbon footprint of global tourism

    Science.gov (United States)

    Lenzen, Manfred; Sun, Ya-Yen; Faturay, Futu; Ting, Yuan-Peng; Geschke, Arne; Malik, Arunima

    2018-06-01

    Tourism contributes significantly to global gross domestic product, and is forecast to grow at an annual 4%, thus outpacing many other economic sectors. However, global carbon emissions related to tourism are currently not well quantified. Here, we quantify tourism-related global carbon flows between 160 countries, and their carbon footprints under origin and destination accounting perspectives. We find that, between 2009 and 2013, tourism's global carbon footprint has increased from 3.9 to 4.5 GtCO2e, four times more than previously estimated, accounting for about 8% of global greenhouse gas emissions. Transport, shopping and food are significant contributors. The majority of this footprint is exerted by and in high-income countries. The rapid increase in tourism demand is effectively outstripping the decarbonization of tourism-related technology. We project that, due to its high carbon intensity and continuing growth, tourism will constitute a growing part of the world's greenhouse gas emissions.

  13. Silk industry and carbon footprint mitigation

    Science.gov (United States)

    Giacomin, A. M.; Garcia, J. B., Jr.; Zonatti, W. F.; Silva-Santos, M. C.; Laktim, M. C.; Baruque-Ramos, J.

    2017-10-01

    Currently there is a concern with issues related to sustainability and more conscious consumption habits. The carbon footprint measures the total amount of greenhouse gas (GHG) emissions produced directly and indirectly by human activities and is usually expressed in tonnes of carbon dioxide (CO2) equivalents. The present study takes into account data collected in scientific literature regarding the carbon footprint, garments produced with silk fiber and the role of mulberry as a CO2 mitigation tool. There is an indication of a positive correlation between silk garments and carbon footprint mitigation when computed the cultivation of mulberry trees in this calculation. A field of them mitigates CO2 equivalents in a proportion of 735 times the weight of the produced silk fiber by the mulberry cultivated area. At the same time, additional researches are needed in order to identify and evaluate methods to advertise this positive correlation in order to contribute to a more sustainable fashion industry.

  14. Homo sapiens, Homo neanderthalensis and the Denisova specimen: new insights on their evolutionary histories using whole-genome comparisons

    Directory of Open Access Journals (Sweden)

    Vanessa Rodrigues Paixão-Côrtes

    2012-01-01

    Full Text Available After a brief review of the most recent findings in the study of human evolution, an extensive comparison of the complete genomes of our nearest relative, the chimpanzee (Pan troglodytes, of extant Homo sapiens, archaic Homo neanderthalensis and the Denisova specimen were made. The focus was on non-synonymous mutations, which consequently had an impact on protein levels and these changes were classified according to degree of effect. A total of 10,447 non-synonymous substitutions were found in which the derived allele is fixed or nearly fixed in humans as compared to chimpanzee. Their most frequent location was on chromosome 21. Their presence was then searched in the two archaic genomes. Mutations in 381 genes would imply radical amino acid changes, with a fraction of these related to olfaction and other important physiological processes. Eight new alleles were identified in the Neanderthal and/or Denisova genetic pools. Four others, possibly affecting cognition, occured both in the sapiens and two other archaic genomes. The selective sweep that gave rise to Homo sapiens could, therefore, have initiated before the modern/archaic human divergence.

  15. The first Neanderthal remains from an open-air Middle Palaeolithic site in the Levant.

    Science.gov (United States)

    Been, Ella; Hovers, Erella; Ekshtain, Ravid; Malinski-Buller, Ariel; Agha, Nuha; Barash, Alon; Mayer, Daniella E Bar-Yosef; Benazzi, Stefano; Hublin, Jean-Jacques; Levin, Lihi; Greenbaum, Noam; Mitki, Netta; Oxilia, Gregorio; Porat, Naomi; Roskin, Joel; Soudack, Michalle; Yeshurun, Reuven; Shahack-Gross, Ruth; Nir, Nadav; Stahlschmidt, Mareike C; Rak, Yoel; Barzilai, Omry

    2017-06-07

    The late Middle Palaeolithic (MP) settlement patterns in the Levant included the repeated use of caves and open landscape sites. The fossil record shows that two types of hominins occupied the region during this period-Neandertals and Homo sapiens. Until recently, diagnostic fossil remains were found only at cave sites. Because the two populations in this region left similar material cultural remains, it was impossible to attribute any open-air site to either species. In this study, we present newly discovered fossil remains from intact archaeological layers of the open-air site 'Ein Qashish, in northern Israel. The hominin remains represent three individuals: EQH1, a nondiagnostic skull fragment; EQH2, an upper right third molar (RM 3 ); and EQH3, lower limb bones of a young Neandertal male. EQH2 and EQH3 constitute the first diagnostic anatomical remains of Neandertals at an open-air site in the Levant. The optically stimulated luminescence ages suggest that Neandertals repeatedly visited 'Ein Qashish between 70 and 60 ka. The discovery of Neandertals at open-air sites during the late MP reinforces the view that Neandertals were a resilient population in the Levant shortly before Upper Palaeolithic Homo sapiens populated the region.

  16. Ichnotaxonomy of the Laetoli trackways: The earliest hominin footprints

    Science.gov (United States)

    Meldrum, D. J.; Lockley, Martin G.; Lucas, Spencer G.; Musiba, Charles

    2011-04-01

    At 3.6 Ma, the Laetoli Pliocene hominin trackways are the earliest direct evidence of hominin bipedalism. Three decades since their discovery, not only is the question of their attribution still discussed, but marked differences in interpretation concerning the footprints' qualitative features and the inferred nature of the early hominin foot morphology remain. Here, we establish a novel ichnotaxon, Praehominipes laetoliensis, for these tracks and clarify the distinctions of these footprints from those of later hominins, especially modern humans. We also contrast hominin, human, and ape footprints to establish morphological features of these footprints correlated with a midtarsal break versus a stiff longitudinal arch. Original photos, including stereo photographs, and casts of footprints from the 1978 Laetoli excavation, confirm midtarsal flexibility, and repeatedly indicate an associated midfoot pressure ridge. In contrast, the modern human footprint reflects the derived arched-foot architecture, combined with a stiff-legged striding gait. Fossilized footprints of unshod modern human pedestrians in Hawaii and Nicaragua unambiguously illustrate these contrasts. Some points of comparisons with ape footprints are complicated by a variable hallucal position and the distinct manner of ape facultative bipedalism. In contrast to the comparatively rigid platform of the modern human foot, midtarsal flexibility is present in the chimpanzee foot. In ape locomotion, flexion at the transverse tarsal joint, referred to as the "midtarsal break," uncouples the respective functions of the prehensile forefoot and the propulsive hindfoot during grasp-climbing. At some point after the transition to habitual bipedalism, these grasp-climb adaptations, presumed to be present in the last common ancestor of apes and humans, were initially compromised by the loss of divergence of the hallux. An analogous trajectory is evident along an array of increasingly terrestrial extant ape species

  17. Footprint Representation of Planetary Remote Sensing Data

    Science.gov (United States)

    Walter, S. H. G.; Gasselt, S. V.; Michael, G.; Neukum, G.

    The geometric outline of remote sensing image data, the so called footprint, can be represented as a number of coordinate tuples. These polygons are associated with according attribute information such as orbit name, ground- and image resolution, solar longitude and illumination conditions to generate a powerful base for classification of planetary experiment data. Speed, handling and extended capabilites are the reasons for using geodatabases to store and access these data types. Techniques for such a spatial database of footprint data are demonstrated using the Relational Database Management System (RDBMS) PostgreSQL, spatially enabled by the PostGIS extension. Exemplary, footprints of the HRSC and OMEGA instruments, both onboard ESA's Mars Express Orbiter, are generated and connected to attribute information. The aim is to provide high-resolution footprints of the OMEGA instrument to the science community for the first time and make them available for web-based mapping applications like the "Planetary Interactive GIS-on-the-Web Analyzable Database" (PIG- WAD), produced by the USGS. Map overlays with HRSC or other instruments like MOC and THEMIS (footprint maps are already available for these instruments and can be integrated into the database) allow on-the-fly intersection and comparison as well as extended statistics of the data. Footprint polygons are generated one by one using standard software provided by the instrument teams. Attribute data is calculated and stored together with the geometric information. In the case of HRSC, the coordinates of the footprints are already available in the VICAR label of each image file. Using the VICAR RTL and PostgreSQL's libpq C library they are loaded into the database using the Well-Known Text (WKT) notation by the Open Geospatial Consortium, Inc. (OGC). For the OMEGA instrument, image data is read using IDL routines developed and distributed by the OMEGA team. Image outlines are exported together with relevant attribute

  18. Human Decisions: Nitrogen Footprints and Environmental Effects

    Science.gov (United States)

    Leach, A. M.; Bleeker, A.; Galloway, J. N.; Erisman, J.

    2012-12-01

    Human consumption choices are responsible for growing losses of reactive nitrogen (Nr) to the environment. Once in the environment, Nr can cause a cascade of negative impacts such as smog, acid rain, coastal eutrophication, climate change, and biodiversity loss. Although all humans must consume nitrogen as protein, the food production process releases substantial Nr to the environment. This dilemma presents a challenge: how do we feed a growing population while reducing Nr? Although top-down strategies to reduce Nr losses (e.g., emissions controls) are necessary, the bottom-up strategies focusing on personal consumption patterns will be imperative to solve the nitrogen challenge. Understanding the effects of different personal choices on Nr losses and the environment is an important first step for this strategy. This paper will utilize information and results from the N-Calculator, a per capita nitrogen footprint model (www.N-Print.org), to analyze the impact of different food consumption patterns on a personal food nitrogen footprint and the environment. Scenarios will analyze the impact of the following dietary patterns on the average United States (28 kg Nr/cap/yr) food nitrogen footprint: 1) Consuming only the recommended protein as defined by the WHO and the USDA; 2) Reducing food waste by 50%; 3) Consuming a vegetarian diet; 4) Consuming a vegan diet; 5) Consuming a demitarian diet (replacing half of animal protein consumption with vegetable protein); 6) Substituting chicken (a more efficient animal protein) with beef (a less efficient animal protein); 7) Consuming sustainably-produced food; and 8) Using advanced wastewater treatment. Preliminary results suggest that widespread advanced wastewater treatment with nutrient removal technology and halving food waste would each reduce the US personal food nitrogen footprint by 13%. In addition, reducing protein consumption to the recommended levels would reduce the footprint by about 42%. Combining these measures

  19. Carbon footprint reductions via grid energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Trevor S. [Naval Facilities Engineering Service Center, 1100 23rd Avenue, Port Huenem, CA 93043 (United States); Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas (United States); Weeks, Kelly [Department of Maritime Administration, Texas A and M University at Galveston, Galveston, TX 77553 (United States); Tucker, Coleman [Department of Management, Marketing, and Business Administration, University of Houston - Downtown, Houston, Texas 77002 (United States)

    2011-07-01

    This effort presents a framework for reducing carbon emissions through the use of large-scale grid-energy-storage (GES) systems. The specific questions under investigation herein are as follows: Is it economically sound to invest in a GES system and is the system at least carbon footprint neutral? This research will show the answer to both questions is in the affirmative. Scilicet, when utilized judiciously, grid energy storage systems can be both net present value positive as well as be total carbon footprint negative. The significant contribution herein is a necessary and sufficient condition for achieving carbon footprint reductions via grid energy storage systems.

  20. Carbon footprint as environmental performance indicator for the manufacturing industry

    DEFF Research Database (Denmark)

    Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

    2010-01-01

    With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

  1. Potentials and limitations of footprints for gauging environmental sustainability

    DEFF Research Database (Denmark)

    Laurent, Alexis; Owsianiak, Mikolaj

    2017-01-01

    To address the sustainability challenge, a large variety of footprints, aiming at capturing specific impacts of human activities on natural environment, have emerged. But, how do they fit into our addressing of environmental sustainability? Here, we build on a critical literature review to (1......) provide an overview of existing footprints; (2) define their roles; (3) position them within the broad spectrum of known environmental problems and control variables of the planetary boundaries; and (4) argue for the need of consistent thresholds to benchmark footprint scores against absolute...

  2. Estimation of foot pressure from human footprint depths using 3D scanner

    Science.gov (United States)

    Wibowo, Dwi Basuki; Haryadi, Gunawan Dwi; Priambodo, Agus

    2016-03-01

    The analysis of normal and pathological variation in human foot morphology is central to several biomedical disciplines, including orthopedics, orthotic design, sports sciences, and physical anthropology, and it is also important for efficient footwear design. A classic and frequently used approach to study foot morphology is analysis of the footprint shape and footprint depth. Footprints are relatively easy to produce and to measure, and they can be preserved naturally in different soils. In this study, we need to correlate footprint depth with corresponding foot pressure of individual using 3D scanner. Several approaches are used for modeling and estimating footprint depths and foot pressures. The deepest footprint point is calculated from z max coordinate-z min coordinate and the average of foot pressure is calculated from GRF divided to foot area contact and identical with the average of footprint depth. Evaluation of footprint depth was found from importing 3D scanner file (dxf) in AutoCAD, the z-coordinates than sorted from the highest to the lowest value using Microsoft Excel to make footprinting depth in difference color. This research is only qualitatif study because doesn't use foot pressure device as comparator, and resulting the maximum pressure on calceneus is 3.02 N/cm2, lateral arch is 3.66 N/cm2, and metatarsal and hallux is 3.68 N/cm2.

  3. Redesigning Manufacturing Footprint from Dynamic Perspective

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2009-01-01

    footprint to address the constantly emerging new challenges by giving a holistic approach from dynamic perspective. Three Danish companies are presented. The way they developed their international manufacturing networks is analysed historically, and their redesigning of manufacturing footprint is expressed...... as how to re-assign portfolios of products and processes between specific plants within the same manufacturing network at one point in time. The strategic factors that have impact on such decisions are discussed and classified into two groups. Last, a holistic framework and a process model is presented...

  4. Twelve metropolitan carbon footprints. A preliminary comparative global assessment

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.; Brown, Marilyn A.

    2010-01-01

    A dearth of available data on carbon emissions and comparative analysis between metropolitan areas make it difficult to confirm or refute best practices and policies. To help provide benchmarks and expand our understanding of urban centers and climate change, this article offers a preliminary comparison of the carbon footprints of 12 metropolitan areas. It does this by examining emissions related to vehicles, energy used in buildings, industry, agriculture, and waste. The carbon emissions from these sources - discussed here as the metro area's partial carbon footprint - provide a foundation for identifying the pricing, land use, help metropolitan areas throughout the world respond to climate change. The article begins by exploring a sample of the existing literature on urban morphology and climate change and explaining the methodology used to calculate each area's carbon footprint. The article then depicts the specific carbon footprints for Beijing, Jakarta, London, Los Angeles, Manila, Mexico City, New Delhi, New York, Sao Paulo, Seoul, Singapore, and Tokyo and compares these to respective national averages. It concludes by offering suggestions for how city planners and policymakers can reduce the carbon footprint of these and possibly other large urban areas. (author)

  5. Assessment of global grey water footprint of major food crops

    Science.gov (United States)

    Yang, Hong; Liu, Wenfeng; Antonelli, Marta

    2016-04-01

    Agricultural production is one of the major sources of water pollution in the world. This is closely related to the excess application of fertilizers. Leaching of N and P to water bodies has caused serious degradation of water quality in many places. With the persistent increase in the demand for agricultural products, agricultural intensification evident during the past decades will continue in the future. This will lead to further increase in fertilizer application and consequently water pollution. Grey water footprint is a measure of the intensity of water pollution caused by water use for human activities. It is defined as the volume of water that is required to assimilate a load of pollutants to a freshwater body, based on natural background concentrations and water quality standards. This study conducts a global assessment of grey water footprint for major cereal crops, wheat, maize and rice. A crop model, Python-based EPIC (PEPIT), is applied to quantify the leaching of N and P from the fertilizer application in the three crops on a global scale with 0.5 degree spatial resolution. The hotspots of leaching are identified. The results suggest that, based on the definition and method of grey water footprint proposed by the World Water Footprint Network, the grey water footprint in many parts of the world has exceeded their total water resources availability. This indicates the seriousness of water pollution caused by agricultural production. However, the situation may also call for the development of a realistic measurement of grey water footprint which is more pertinent to water resources management. This paper proposes some alternatives in measuring grey water footprint and also discusses incorporation of grey water footprint assessment into water policy formulation and river basins plan development.

  6. ECOLOGICAL FOOTPRINT ANALYSIS OF CANNED SWEET CORN

    Directory of Open Access Journals (Sweden)

    Phairat Usubharatana

    2016-07-01

    Full Text Available There has been a notable increase in both consumer knowledge and awareness regarding the ecological benefits of green products and services. Manufacturers now pay more attention to green, environmentally friendly production processes. Two significant tools that can facilitate such a goal are life cycle assessment (LCA and ecological footprint (EF. This study aimed to analyse and determine the damage to the environment, focusing on the canned fruit and vegetable processing. Canned sweet corn (340 g was selected for the case study. All inputs and outputs associated with the product system boundary were collected through field surveys. The acquired inventory was then analysed and evaluated using both LCA and EF methodology. The results were converted into an area of biologically productive land and presented as global hectares (gha. The ecological footprint of one can of sweet corn was calculated as 6.51E-04 gha. The three factors with the highest impact on ecological footprint value were the corn kernels used in the process, the packaging and steam, equivalent to 2.93E-04 gha, 1.19E-04 gha and 1.17E-04 gha respectively. To promote the sustainable development, the company should develop new technology or utilize better management techniques to reduce the ecological footprint of canned food production.

  7. How to Calculate Your Institution's Nitrogen Footprint ...

    Science.gov (United States)

    The Nitrogen Footprint Tool (NFT) allows institutions to estimate and manage their nitrogen footprint, and EPA’s Sustainable and Healthy Communities program is supporting an effort to test and expand this approach at multiple colleges, universities and institutions across the US. The growing awareness of sustainability has prompted many institutions of higher education to assess and manage their environmental impact. Many universities have programs to decrease their carbon footprint, but carbon represents just one facet of an institution’s environmental impact. Nitrogen is also important because a university’s nitrogen loss to the environment contributes to smog, soil acidification, eutrophication, biodiversity loss, the enhanced greenhouse effect, stratospheric ozone depletion, and more. The attached data template and user’s manual was based on the first NFT created for a university (University of Virginia), and tested in 6 additional institutions (including University of New Hampshire, Brown University, Eastern Mennonite University, Colorado State University). The footprint includes nitrogen released to the environment due to: 1) food consumption; 2) food production, reported by specific food categories (vegetable products, seafood, dairy and eggs, meat); 3) research animals; 4) transportation, including fleet vehicles and commuter vehicles; 5) fertilizer application; and 6) utilities, separated into electricity and heating. The data template and

  8. The green, blue and grey water footprint of crops and derived crop products

    Science.gov (United States)

    Mekonnen, M. M.; Hoekstra, A. Y.

    2011-05-01

    This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996-2005. The assessment improves upon earlier research by taking a high-resolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc minute grid. We have used a grid-based dynamic water balance model to calculate crop water use over time, with a time step of one day. The model takes into account the daily soil water balance and climatic conditions for each grid cell. In addition, the water pollution associated with the use of nitrogen fertilizer in crop production is estimated for each grid cell. The crop evapotranspiration of additional 20 minor crops is calculated with the CROPWAT model. In addition, we have calculated the water footprint of more than two hundred derived crop products, including various flours, beverages, fibres and biofuels. We have used the water footprint assessment framework as in the guideline of the Water Footprint Network. Considering the water footprints of primary crops, we see that the global average water footprint per ton of crop increases from sugar crops (roughly 200 m3 ton-1), vegetables (300 m3 ton-1), roots and tubers (400 m3 ton-1), fruits (1000 m3 ton-1), cereals (1600 m3 ton-1), oil crops (2400 m3 ton-1) to pulses (4000 m3 ton-1). The water footprint varies, however, across different crops per crop category and per production region as well. Besides, if one considers the water footprint per kcal, the picture changes as well. When considered per ton of product, commodities with relatively large water footprints are: coffee, tea, cocoa, tobacco, spices, nuts, rubber and fibres. The analysis of water footprints of different biofuels shows that bio-ethanol has a lower water footprint (in m3 GJ-1) than biodiesel, which supports earlier analyses. The crop used matters significantly as well: the global average water footprint of bio-ethanol based on sugar beet amounts to 51 m3 GJ-1

  9. Commercial versus PARTNER study experience with the transfemoral Edwards SAPIEN valve for inoperable patients with severe aortic stenosis.

    Science.gov (United States)

    Pendyala, Lakshmana K; Minha, Sa'ar; Barbash, Israel M; Torguson, Rebecca; Magalhaes, Marco A; Okubagzi, Petros; Loh, Joshua P; Chen, Fang; Satler, Lowell F; Pichard, Augusto D; Waksman, Ron

    2014-01-15

    In patients with aortic stenosis who cannot have surgery, transcatheter aortic valve replacement using the Edwards SAPIEN valve has been shown to improve survival rate and is approved for commercial use in the United States. This study aims to assess the clinical profile, procedural characteristics, and in-hospital complications in patients treated with a commercial SAPIEN valve outside the clinical trial context. We retrospectively analyzed 69 consecutive patients who underwent transcatheter aortic valve replacement with a commercial SAPIEN valve compared with 55 Placement of AoRTic traNscathetER valves (PARTNER) trial patients from cohort B enrolled in the same institution by the same Heart Team. Compared with the commercial group, patients in the PARTNER cohort B had higher mean Society of Thoracic Surgeons score (10 ± 5 vs 9 ± 4, p = 0.04) and a lower rate of peripheral arterial disease (19% vs 44%, p = 0.004). Most patients in the commercial group had the procedure under conscious sedation (83% vs 66%, p = 0.03). Planned surgical cut down for vascular access was rare in the commercial group (1.4% vs 46%, p commercial group (7.2% vs 27%, p = 0.003; 2.9% vs 16%, p = 0.01; and 28% vs 60%, p commercial group. In conclusion, transfemoral commercial use of the Edwards SAPIEN valve for inoperable patients shows similar in-hospital mortality and stroke rates compared with PARTNER cohort B. The refinements in the procedure such as more conscious sedation, experience of the operators, and careful vascular planning in the commercial group led to lesser vascular and bleeding complications and shorter length of stay. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. Income-carbon footprint relationships for urban and rural households of Iskandar Malaysia

    Science.gov (United States)

    Majid, M. R.; Moeinzadeh, S. N.; Tifwa, H. Y.

    2014-02-01

    Iskandar Malaysia has a vision to achieve sustainable development and a low carbon society status by decreasing the amount of CO2 emission as much as 60% by 2025. As the case is in other parts of the world, households are suspected to be a major source of carbon emission in Iskandar Malaysia. At the global level, 72% of greenhouse gas emission is a consequence of household activities, which is influenced by lifestyle. Income is the most important indicator of lifestyle and consequently may influence the amount of households' carbon footprint. The main objective of this paper is to illustrate the carbon-income relationships in Iskandar Malaysia's urban and rural areas. Data were gathered through a questionnaire survey of 420 households. The households were classified into six categories based on their residential area status. Both direct and indirect carbon footprints of respondents were calculated using a carbon footprint model. Direct carbon footprint includes domestic energy use, personal travel, flight and public transportation while indirect carbon footprint is the total secondary carbon emission measurement such as housing operations, transportation operations, food, clothes, education, cultural and recreational services. Analysis of the results shows a wide range of carbon footprint values and a significance correlation between income and carbon footprint. The carbon footprints vary in urban and rural areas, and also across different urban areas. These identified carbon footprint values can help the authority target its carbon reduction programs.

  11. Income-carbon footprint relationships for urban and rural households of Iskandar Malaysia

    International Nuclear Information System (INIS)

    Majid, M R; Moeinzadeh, S N; Tifwa, H Y

    2014-01-01

    Iskandar Malaysia has a vision to achieve sustainable development and a low carbon society status by decreasing the amount of CO 2 emission as much as 60% by 2025. As the case is in other parts of the world, households are suspected to be a major source of carbon emission in Iskandar Malaysia. At the global level, 72% of greenhouse gas emission is a consequence of household activities, which is influenced by lifestyle. Income is the most important indicator of lifestyle and consequently may influence the amount of households' carbon footprint. The main objective of this paper is to illustrate the carbon-income relationships in Iskandar Malaysia's urban and rural areas. Data were gathered through a questionnaire survey of 420 households. The households were classified into six categories based on their residential area status. Both direct and indirect carbon footprints of respondents were calculated using a carbon footprint model. Direct carbon footprint includes domestic energy use, personal travel, flight and public transportation while indirect carbon footprint is the total secondary carbon emission measurement such as housing operations, transportation operations, food, clothes, education, cultural and recreational services. Analysis of the results shows a wide range of carbon footprint values and a significance correlation between income and carbon footprint. The carbon footprints vary in urban and rural areas, and also across different urban areas. These identified carbon footprint values can help the authority target its carbon reduction programs

  12. [Carbon footprint of buildings in the urban agglomeration of central Liaoning, China].

    Science.gov (United States)

    Shi, Yu; Yun, Ying Xia; Liu, Chong; Chu, Ya Qi

    2017-06-18

    With the development of urbanization in China, buildings consumed lots of material and energy. How to estimate carbon emission of buildings is an important scientific problem. Carbon footprint of the central Liaoning agglomeration was studied with carbon footprint approach, geographic information system (GIS) and high-resolution remote sensing (HRRS) technology. The results showed that the construction carbon footprint coefficient of central Liaoning urban agglomeration was 269.16 kg·m -2 . The approach of interpreting total building area and spatial distribution with HRRS was effective, and the accuracy was 89%. The extraction approach was critical for total carbon footprint and spatial distribution estimation. The building area and total carbon footprint of central Liaoning urban agglomeration in descending order was Shenyang, Anshan, Fushun, Liao-yang, Yingkou, Tieling and Benxi. The annual average increment of footprint from 2011 to 2013 in descending order was Shenyang, Benxi, Fushun, Anshan, Tieling, Yingkou and Liaoyang. The accurate estimation of construction carbon footprint spatial and its distribution was of significance for the planning and optimization of carbon emission reduction.

  13. Advanced entry guidance algorithm with landing footprint computation

    Science.gov (United States)

    Leavitt, James Aaron

    The design and performance evaluation of an entry guidance algorithm for future space transportation vehicles is presented. The algorithm performs two functions: on-board trajectory planning and trajectory tracking. The planned longitudinal path is followed by tracking drag acceleration, as is done by the Space Shuttle entry guidance. Unlike the Shuttle entry guidance, lateral path curvature is also planned and followed. A new trajectory planning function for the guidance algorithm is developed that is suitable for suborbital entry and that significantly enhances the overall performance of the algorithm for both orbital and suborbital entry. In comparison with the previous trajectory planner, the new planner produces trajectories that are easier to track, especially near the upper and lower drag boundaries and for suborbital entry. The new planner accomplishes this by matching the vehicle's initial flight path angle and bank angle, and by enforcing the full three-degree-of-freedom equations of motion with control derivative limits. Insights gained from trajectory optimization results contribute to the design of the new planner, giving it near-optimal downrange and crossrange capabilities. Planned trajectories and guidance simulation results are presented that demonstrate the improved performance. Based on the new planner, a method is developed for approximating the landing footprint for entry vehicles in near real-time, as would be needed for an on-board flight management system. The boundary of the footprint is constructed from the endpoints of extreme downrange and crossrange trajectories generated by the new trajectory planner. The footprint algorithm inherently possesses many of the qualities of the new planner, including quick execution, the ability to accurately approximate the vehicle's glide capabilities, and applicability to a wide range of entry conditions. Footprints can be generated for orbital and suborbital entry conditions using a pre

  14. Manufacturing footprint optimisation: a necessity for manufacturing network in changing business environment

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2010-01-01

    Facing the unpredictable financial crisis, optimising the footprint can be the biggest and most important transformation a manufacturer can undertake. In order to realise the optimisation, fundamental understanding on manufacturing footprint is required. Different elements of manufacturing...... footprint have been investigated independently in the existing literature. In this paper, for the purpose of relationship exploration between different elements, manufacturing footprints of three industrial companies are traced historically. Based on them, four reasons for the transformation...

  15. Measuring sustainability. Why the ecological footprint is bad economics and bad environmental science

    Energy Technology Data Exchange (ETDEWEB)

    Fiala, Nathan [Department of Economics, University of California, Irvine, 3151 Social Science Plaza, Irvine, CA 92697-5100 (United States)

    2008-11-01

    The ecological footprint is a measure of the resources necessary to produce the goods that an individual or population consumes. It is also used as a measure of sustainability, though evidence suggests that it falls short. The assumptions behind footprint calculations have been extensively criticized; I present here further evidence that it fails to satisfy simple economic principles because the basic assumptions are contradicted by both theory and historical data. Specifically, I argue that the footprint arbitrarily assumes both zero greenhouse gas emissions, which may not be ex ante optimal, and national boundaries, which makes extrapolating from the average ecological footprint problematic. The footprint also cannot take into account intensive production, and so comparisons to biocapacity are erroneous. Using only the assumptions of the footprint then, one could argue that the Earth can sustain greatly increased production, though there are important limitations that the footprint cannot address, such as land degradation. Finally, the lack of correlation between land degradation and the ecological footprint obscures the effects of a larger sustainability problem. Better measures of sustainability would address these issues directly. (author)

  16. Short- and long-term need for permanent pacemaker after transcatheter implantation of the Edwards Sapien aortic valve prosthesis.

    Science.gov (United States)

    Moreno, Raúl; Calvo, Luis; Sánchez-Recalde, Angel; Galeote, Guillermo; Jiménez-Valero, Santiago; López, Teresa; Plaza, Ignacio; González-Davia, Rosa; Ramírez, Ulises; Mesa, Jose Maria; Moreno-Gomez, Isidro; López-Sendón, José-Luis

    2015-11-01

    A permanent pacemaker is frequently needed after transcatheter aortic valve implantation, but the available data are mainly on the CoreValve system. To evaluate the need for new permanent pacemaker after implantation of the Edwards Sapien device, as well as related factors. We included the first 100 patients treated with the Edwards Sapien device at our institution. Of these, 12 had a permanent pacemaker before the procedure, and thus our study population was the remaining 88 patients. A permanent pacemaker was indicated in eight patients (9.1%) during hospitalization or at 30 days. After discharge, another four patients needed a pacemaker (at 42 days and three, 18, and 30 months). Two variables were associated with the need for pacemaker during hospitalization: previous dialysis (13% vs. 1%, p=0.042) and complete right bundle branch block before the procedure (25% vs. 5%, p=0.032). More than one month after the procedure, the characteristics associated with the need for pacemaker were plasma creatinine level (2.5±1.7 vs. 1.3±0.6 mg/dl, p=0.001) and previous myocardial infarction (50% vs. 10%, p=0.013). The rate of pacemaker implantation with the Edwards Sapien device was 9.1%. Right bundle branch block and dialysis were associated with this complication.

  17. Air-source heat pump carbon footprints: HFC impacts and comparison to other heat sources

    International Nuclear Information System (INIS)

    Johnson, Eric P.

    2011-01-01

    European governments see that heat pumps could reduce carbon emissions in space- and hot-water heating. EU's Renewable Energy Directive designates heat pumps as renewable - eligible for various subsidies - if their carbon footprints are below an implied, average threshold. This threshold omits carbon generated by manufacture and emission of a heat-pump's fluorocarbon refrigerant. It also omits the footprint of the heat pump's hardware. To see if these omissions are significant, this study calculated carbon footprints of representative, residential heat pumps in the UK. Three findings emerged. First, in relation to power generation, which accounts for most of a heat-pump's greenhouse-gas emissions, fluorocarbons add another 20% to the footprint. Second, at UK efficiencies a heat-pump footprint (in kg CO 2 e emitted per kWh delivered) is comparable or higher than footprints of gaseous fuels used in heating. It is lower than the footprint of heating oil and far lower than the footprints of solid fuels. Third, production and disposal of a heat pump's hardware is relatively insignificant, accounting for only 2-3% of the overall heat-pump footprint. Sensitivities to the results were assessed: key factors are footprint of electricity generation, F-gas composition and leak rates and type of wall construction. - Research highlights: → Refrigerant emissions add 20% to a UK air-source heat pump's carbon footprint. → This contribution is so far ignored by regulations. → UK heat pump footprints are comparable to those of gaseous fuels.

  18. Spatially and temporally explicit water footprint accounting

    OpenAIRE

    Mekonnen, Mesfin

    2011-01-01

    The earth’s freshwater resources are subject to increasing pressure in the form of consumptive water use and pollution (Postel, 2000; WWAP, 2003, 2006, 2009). Quantitative assessment of the green, blue and grey water footprint of global production and consumption can be regarded as a key in understanding the pressure put on the global freshwater resources. The overall objective of this thesis is, therefore, to analyse the spatial and temporal pattern of the water footprint of humans from both...

  19. Integrating ecological, carbon and water footprint into a "footprint family" of indicators: Definition and role in tracking human pressure on the planet

    NARCIS (Netherlands)

    Galli, A.; Wiedmann, T.O.; Ercin, Ertug; Knoblauch, D.; Ewing, B.R.; Giljum, S.

    2012-01-01

    In recent years, attempts have been made to develop an integrated Footprint approach for the assessment of the environmental impacts of production and consumption. In this paper, we provide for the first time a definition of the “Footprint Family” as a suite of indicators to track human pressure on

  20. LB1 and LB6 Homo floresiensis are not modern human (Homo sapiens) cretins.

    Science.gov (United States)

    Brown, Peter

    2012-02-01

    Excavations in the late Pleistocene deposits at Liang Bua cave, Flores, have uncovered the skeletal remains of several small-bodied and small-brained hominins in association with stone artefacts and the bones of Stegodon. Due to their combination of plesiomorphic, unique and derived traits, they were ascribed to a new species, Homo floresiensis, which, along with Stegodon, appears to have become extinct ∼17 ka (thousand years ago). However, recently it has been argued that several characteristics of H. floresiensis were consistent with dwarfism and evidence of delayed development in modern human (Homo sapiens) myxoedematous endemic (ME) cretins. This research compares the skeletal and dental morphology in H. floresiensis with the clinical and osteological indicators of cretinism, and the traits that have been argued to be associated with ME cretinism in LB1 and LB6. Contrary to published claims, morphological and statistical comparisons did not identify the distinctive skeletal and dental indicators of cretinism in LB1 or LB6 H. floresiensis. Brain mass, skeletal proportions, epiphyseal union, orofacial morphology, dental development, size of the pituitary fossa and development of the paranasal sinuses, vault bone thickness and dimensions of the hands and feet all distinguish H. floresiensis from modern humans with ME cretinism. The research team responsible for the diagnosis of ME cretinism had not examined the original H. floresiensis skeletal materials, and perhaps, as a result, their research confused taphonomic damage with evidence of disease, and thus contained critical errors of fact and interpretation. Behavioural scenarios attempting to explain the presence of cretinous H. sapiens in the Liang Bua Pleistocene deposits, but not unaffected H. sapiens, are both unnecessary and not supported by the available archaeological and geochronological evidence from Flores. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

  1. A Backward-Lagrangian-Stochastic Footprint Model for the Urban Environment

    Science.gov (United States)

    Wang, Chenghao; Wang, Zhi-Hua; Yang, Jiachuan; Li, Qi

    2018-02-01

    Built terrains, with their complexity in morphology, high heterogeneity, and anthropogenic impact, impose substantial challenges in Earth-system modelling. In particular, estimation of the source areas and footprints of atmospheric measurements in cities requires realistic representation of the landscape characteristics and flow physics in urban areas, but has hitherto been heavily reliant on large-eddy simulations. In this study, we developed physical parametrization schemes for estimating urban footprints based on the backward-Lagrangian-stochastic algorithm, with the built environment represented by street canyons. The vertical profile of mean streamwise velocity is parametrized for the urban canopy and boundary layer. Flux footprints estimated by the proposed model show reasonable agreement with analytical predictions over flat surfaces without roughness elements, and with experimental observations over sparse plant canopies. Furthermore, comparisons of canyon flow and turbulence profiles and the subsequent footprints were made between the proposed model and large-eddy simulation data. The results suggest that the parametrized canyon wind and turbulence statistics, based on the simple similarity theory used, need to be further improved to yield more realistic urban footprint modelling.

  2. Analysis of the carbon footprint of coastal protection systems

    NARCIS (Netherlands)

    Labrujere, A.L.; Verhagen, H.J.

    2012-01-01

    When calculating the Carbon Footprint for a product or service, a direct link is made between the total amount of consumed energy and the produced amount of carbon dioxide during production. For that reason calculating the carbon footprint of various alternatives is a very straightforward method to

  3. The green, blue and grey water footprint of crops and derived crop products

    Directory of Open Access Journals (Sweden)

    M. M. Mekonnen

    2011-05-01

    Full Text Available This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996–2005. The assessment improves upon earlier research by taking a high-resolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc minute grid. We have used a grid-based dynamic water balance model to calculate crop water use over time, with a time step of one day. The model takes into account the daily soil water balance and climatic conditions for each grid cell. In addition, the water pollution associated with the use of nitrogen fertilizer in crop production is estimated for each grid cell. The crop evapotranspiration of additional 20 minor crops is calculated with the CROPWAT model. In addition, we have calculated the water footprint of more than two hundred derived crop products, including various flours, beverages, fibres and biofuels. We have used the water footprint assessment framework as in the guideline of the Water Footprint Network.

    Considering the water footprints of primary crops, we see that the global average water footprint per ton of crop increases from sugar crops (roughly 200 m3 ton−1, vegetables (300 m3 ton−1, roots and tubers (400 m3 ton−1, fruits (1000 m3 ton−1, cereals (1600 m3 ton−1, oil crops (2400 m3 ton−1 to pulses (4000 m3 ton−1. The water footprint varies, however, across different crops per crop category and per production region as well. Besides, if one considers the water footprint per kcal, the picture changes as well. When considered per ton of product, commodities with relatively large water footprints are: coffee, tea, cocoa, tobacco, spices, nuts, rubber and fibres. The analysis of water footprints of different biofuels shows that bio-ethanol has a lower water footprint (in m

  4. The Effect of Learning Cycle Model on Students’ Reducing Ecological Footprints

    Directory of Open Access Journals (Sweden)

    Özgül Keleş

    2011-12-01

    Full Text Available The objective of this study is to investigate effect of ecological footprint education, in which 5E learning cycle model is used, in reducing primary school students’ ecological footprints. The working group of the study is composed of 124 primary school students studying in 4th, 5th, 6th, 7th, 8th classes. In this study, 5E learning model is used in teaching a course in order to increase the participating students’ knowledge about ecological footprints and to calculate ecological footprints. Experimental method is used in this study. In data analysis, the paired samples t-test is used in for relevant samplings. The findings gathered indicate that ecological footprints of the participating students to the study decreased at the end of the study. It is determined that the mean of primary students’ ecological footprints differ from meaningfully according to level of the class and sex. Prospective solution offers are developed by handling the prospective effects of conclusions of the study on sustainable life and environmental education and conclusions’ importance in terms of learning and developing learning programmes with a critical point of view

  5. The carbon footprint of Greek households (1995–2012)

    International Nuclear Information System (INIS)

    Markaki, M.; Belegri-Roboli, A.; Sarafidis, U.; Mirasgedis, S.

    2017-01-01

    The goal of this paper is twofold: i) to investigate the carbon footprint of Greek households throughout the period 1995–2012, in order to identify the main socio-economic factors that affect GHG emissions, and ii) to evaluate the effectiveness of the implemented policies to tackle climate change. In this, a consumption-based emissions inventory approach is applied. The analysis is based on an environmentally-extended input-output model including direct CO_2 emissions from households, indirect CO_2 emissions from electricity consumption and indirect CO_2 emissions from energy used in the production of goods and services purchased by households, domestic or imported. Statistical analysis and appropriate regression models were developed in order to identify the main factors influencing the carbon footprint of Greek households. The results indicate that the observed trends during the period 1995–2008 can be attributed to the effect of high economic growth. This trend is partially counterbalanced by favorable weather conditions and the implementation of greenhouse mitigation policies and measures mainly in the supply side. Since 2008 the shrinking household income is the dominant driver. In addition, the effectiveness of energy conservation policies and measures in place is rather low, while the effect of imports is limited. - Highlights: • The factors influencing the carbon footprint of Greek households have been analyzed. • The analysis is based on consumption-based GHG inventories. • High economic growth resulted in carbon footprint increases during 1995–2008. • Carbon footprint reduction after 2008 is attributed to shrinking of household income. • Mitigation measures in power and manufacturing sectors reduced carbon footprint.

  6. Carabelli's trait revisited: an examination of mesiolingual features at the enamel-dentine junction and enamel surface of Pan and Homo sapiens upper molars.

    Science.gov (United States)

    Ortiz, Alejandra; Skinner, Matthew M; Bailey, Shara E; Hublin, Jean-Jacques

    2012-10-01

    Carabelli's trait is a morphological feature that frequently occurs on the mesiolingual aspect of Homo sapiens upper molars. Similar structures also referred to as Carabelli's trait have been reported in apes and fossil hominins. However, the morphological development and homology of these mesiolingual structures among hominoids are poorly understood. In this study, we employ micro-computed tomography to image the enamel-dentine junction (EDJ) and outer enamel surface (OES) of Pan (n = 48) and H. sapiens (n = 52) upper molars. We investigate the developmental origin of mesiolingual features in these taxa and establish the relative contribution of the EDJ and enamel cap to feature expression. Results demonstrate that mesiolingual features of H. sapiens molars develop at the EDJ and are similarly expressed at the OES. Morphological variation at both surfaces in this taxon can satisfactorily be assessed using standards for Carabelli's trait developed by the Arizona State University Dental Anthropology System (ASUDAS). Relative to H. sapiens, Pan has an even greater degree of correspondence in feature expression between the EDJ and OES. Morphological manifestations in Pan molars are not necessarily limited to the protocone and are best characterized by a lingual cingulum that cannot be captured by the ASUDAS. Cusp-like structures, similar to those seen in marked Carabelli's trait expressions in H. sapiens, were not found in Pan. This study provides a foundation for further analyses on the evolutionary history of mesiolingual dental traits within the hominoid lineage. It also highlights the wealth of morphological data that can be obtained at the EDJ for understanding tooth development and for characterizing tooth crown variation in worn fossil teeth. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Carbon footprints of cities and other human settlements in the UK

    Science.gov (United States)

    Minx, Jan; Baiocchi, Giovanni; Wiedmann, Thomas; Barrett, John; Creutzig, Felix; Feng, Kuishuang; Förster, Michael; Pichler, Peter-Paul; Weisz, Helga; Hubacek, Klaus

    2013-09-01

    A growing body of literature discusses the CO2 emissions of cities. Still, little is known about emission patterns across density gradients from remote rural places to highly urbanized areas, the drivers behind those emission patterns and the global emissions triggered by consumption in human settlements—referred to here as the carbon footprint. In this letter we use a hybrid method for estimating the carbon footprints of cities and other human settlements in the UK explicitly linking global supply chains to local consumption activities and associated lifestyles. This analysis comprises all areas in the UK, whether rural or urban. We compare our consumption-based results with extended territorial CO2 emission estimates and analyse the driving forces that determine the carbon footprint of human settlements in the UK. Our results show that 90% of the human settlements in the UK are net importers of CO2 emissions. Consumption-based CO2 emissions are much more homogeneous than extended territorial emissions. Both the highest and lowest carbon footprints can be found in urban areas, but the carbon footprint is consistently higher relative to extended territorial CO2 emissions in urban as opposed to rural settlement types. The impact of high or low density living remains limited; instead, carbon footprints can be comparatively high or low across density gradients depending on the location-specific socio-demographic, infrastructural and geographic characteristics of the area under consideration. We show that the carbon footprint of cities and other human settlements in the UK is mainly determined by socio-economic rather than geographic and infrastructural drivers at the spatial aggregation of our analysis. It increases with growing income, education and car ownership as well as decreasing household size. Income is not more important than most other socio-economic determinants of the carbon footprint. Possibly, the relationship between lifestyles and infrastructure only

  8. Carbon footprints of cities and other human settlements in the UK

    International Nuclear Information System (INIS)

    Minx, Jan; Pichler, Peter-Paul; Weisz, Helga; Baiocchi, Giovanni; Wiedmann, Thomas; Barrett, John; Creutzig, Felix; Feng, Kuishuang; Hubacek, Klaus; Förster, Michael

    2013-01-01

    A growing body of literature discusses the CO 2 emissions of cities. Still, little is known about emission patterns across density gradients from remote rural places to highly urbanized areas, the drivers behind those emission patterns and the global emissions triggered by consumption in human settlements—referred to here as the carbon footprint. In this letter we use a hybrid method for estimating the carbon footprints of cities and other human settlements in the UK explicitly linking global supply chains to local consumption activities and associated lifestyles. This analysis comprises all areas in the UK, whether rural or urban. We compare our consumption-based results with extended territorial CO 2 emission estimates and analyse the driving forces that determine the carbon footprint of human settlements in the UK. Our results show that 90% of the human settlements in the UK are net importers of CO 2 emissions. Consumption-based CO 2 emissions are much more homogeneous than extended territorial emissions. Both the highest and lowest carbon footprints can be found in urban areas, but the carbon footprint is consistently higher relative to extended territorial CO 2 emissions in urban as opposed to rural settlement types. The impact of high or low density living remains limited; instead, carbon footprints can be comparatively high or low across density gradients depending on the location-specific socio-demographic, infrastructural and geographic characteristics of the area under consideration. We show that the carbon footprint of cities and other human settlements in the UK is mainly determined by socio-economic rather than geographic and infrastructural drivers at the spatial aggregation of our analysis. It increases with growing income, education and car ownership as well as decreasing household size. Income is not more important than most other socio-economic determinants of the carbon footprint. Possibly, the relationship between lifestyles and infrastructure

  9. Carbon footprint estimation of municipal water cycle

    Science.gov (United States)

    Bakhshi, Ali A.

    2009-11-01

    This research investigates the embodied energy associated with water use. A geographic information system (GIS) was tested using data from Loudoun County, Virginia. The objective of this study is to estimate the embodied energy and carbon emission levels associated with water service at a geographical location and to improve for sustainability planning. Factors that affect the carbon footprint were investigated and the use of a GIS based model as a sustainability planning framework was evaluated. The carbon footprint metric is a useful tool for prediction and measurement of a system's sustainable performance over its expected life cycle. Two metrics were calculated: tons of carbon dioxide per year to represent the contribution to global warming and watt-hrs per gallon to show the embodied energy associated with water consumption. The water delivery to the building, removal of wastewater from the building and associated treatment of water and wastewater create a sizable carbon footprint; often the energy attributed to this water service is the greatest end use of electrical energy. The embodied energy in water depends on topographical characteristics of the area's local water supply, the efficiency of the treatment systems, and the efficiency of the pumping stations. The questions answered by this research are: What is the impact of demand side sustainable water practices on the embodied energy as represented by a comprehensive carbon footprint? What are the major energy consuming elements attributed to the system? What is a viable and visually identifiable tool to estimate the carbon footprint attributed to those Greenhouse Gas (GHG) producing elements? What is the embodied energy and emission associated with water use delivered to a building? Benefits to be derived from a standardized GIS applied carbon footprint estimation approach include: (1) Improved environmental and economic information for the developers, water and wastewater processing and municipal

  10. Association of footprint measurements with plantar kinetics: a linear regression model.

    Science.gov (United States)

    Fascione, Jeanna M; Crews, Ryan T; Wrobel, James S

    2014-03-01

    The use of foot measurements to classify morphology and interpret foot function remains one of the focal concepts of lower-extremity biomechanics. However, only 27% to 55% of midfoot variance in foot pressures has been determined in the most comprehensive models. We investigated whether dynamic walking footprint measurements are associated with inter-individual foot loading variability. Thirty individuals (15 men and 15 women; mean ± SD age, 27.17 ± 2.21 years) walked at a self-selected speed over an electronic pedography platform using the midgait technique. Kinetic variables (contact time, peak pressure, pressure-time integral, and force-time integral) were collected for six masked regions. Footprints were digitized for area and linear boundaries using digital photo planimetry software. Six footprint measurements were determined: contact area, footprint index, arch index, truncated arch index, Chippaux-Smirak index, and Staheli index. Linear regression analysis with a Bonferroni adjustment was performed to determine the association between the footprint measurements and each of the kinetic variables. The findings demonstrate that a relationship exists between increased midfoot contact and increased kinetic values in respective locations. Many of these variables produced large effect sizes while describing 38% to 71% of the common variance of select plantar kinetic variables in the medial midfoot region. In addition, larger footprints were associated with larger kinetic values at the medial heel region and both masked forefoot regions. Dynamic footprint measurements are associated with dynamic plantar loading kinetics, with emphasis on the midfoot region.

  11. Carbon footprinting of electronic products

    International Nuclear Information System (INIS)

    Vasan, Arvind; Sood, Bhanu; Pecht, Michael

    2014-01-01

    Highlights: • Challenges in adopting existing CF standards for electronic products are discussed. • Carbon footprint of electronic products is underestimated using existing standards. • Multipronged approach is presented to overcome the identified challenges. • Multipronged approach demonstrated on commercial and military grade DC–DC converter system. - Abstract: In order to mitigate the effects of global warming, companies are being compelled by governments, investors, and customers to control their greenhouse gas (GHG) emissions. Similar to the European Union’s legislation on the airline industry, legislation is expected to require the electronics industry to assess their product’s carbon footprint before sale or use, as the electronics industry’s contribution to global GHG emissions is comparable to the airline industry’s contribution. Thus, it is necessary for members of the electronics industry to assess their current GHG emission rates and identify methods to reduce environmental impacts. Organizations use Carbon Footprint (CF) analysis methods to identify and quantify the GHG emissions associated with the life cycle stages of their product or services. This paper discusses the prevailing methods used by organizations to estimate the CF of their electronics products and identifies the challenges faced by the electronics industry when adopting these methods in an environment of decreasing product development cycles with complex and diffuse supply chains. We find that, as a result of the inconsistencies arising from the system boundary selection methods and databases, the use of outdated LCA approaches, and the lack of supplier’s emissions-related data, the CFs of electronic products are typically underestimated. To address these challenges, we present a comprehensive approach to the carbon footprinting of electronic products that involves the use of product-group-oriented standards, hybrid life cycle assessment techniques, and the

  12. Surveying the Environmental Footprint of Urban Food Consumption

    DEFF Research Database (Denmark)

    Goldstein, Benjamin Paul; Birkved, Morten; Fernandez, John

    2017-01-01

    Assessments of urban metabolism (UM) are well situated to identify the scale, components, and direction of urban and energy flows in cities and have been instrumental in benchmarking and monitoring the key levers of urban environmental pressure, such as transport, space conditioning......, and electricity. Hitherto, urban food consumption has garnered scant attention both in UM accounting (typically lumped with “biomass”) and on the urban policy agenda, despite its relevance to local and global environmental pressures. With future growth expected in urban population and wealth, an accounting...... of the environmental footprint from urban food demand (“foodprint”) is necessary. This article reviews 43 UM assessments including 100 cities, and a total of 132 foodprints in terms of mass, carbon footprint, and ecological footprint and situates it relative to other significant environmental drivers (transport...

  13. Footprint analysis during the growth period.

    Science.gov (United States)

    Volpon, J B

    1994-01-01

    Static footprints were obtained from 672 healthy white subjects ranging in age from newborn to 15 years. The length of the footprint was measured and the medial longitudinal arch was evaluated. The findings showed that the feet grew most rapidly up to 3 years of age. From age 3 onward, the feet maintained an almost constant growth rate, which was the same for both sexes until age 12 years, when girls' feet stopped growing, but boys' feet exhibited further growth. From birth up to 2 years of age, there was a higher incidence of flat feet. Rapid progression of plantar arch development was observed between 2 and 6 years of age.

  14. Understanding the LCA and ISO water footprint: A response to Hoekstra (2016) “A critique on the water-scarcity weighted water footprint in LCA”

    Science.gov (United States)

    Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The p...

  15. Inter- and Intraspecific Variations in the Pectoral Muscles of Common Chimpanzees (Pan troglodytes), Bonobos (Pan paniscus), and Humans (Homo sapiens).

    Science.gov (United States)

    Potau, J M; Arias-Martorell, J; Bello-Hellegouarch, G; Casado, A; Pastor, J F; de Paz, F; Diogo, R

    2018-01-01

    We have analyzed anatomic variations in the pectoralis major and pectoralis minor muscles of common chimpanzees (Pan troglodytes) and bonobos (Pan paniscus) and compared them to anatomic variations in these muscles in humans (Homo sapiens) . We have macroscopically dissected these muscles in six adult Pan troglodytes , five Pan paniscus of ages ranging from fetus to adult, and five adult Homo sapiens . Although Pan troglodytes are thought to lack a separate pectoralis abdominis muscle, we have identified this muscle in three of the Pan troglodytes ; none of the Pan paniscus , however, had this muscle. We have also found deep supernumerary fascicles in the pectoralis major of two Pan troglodytes and all five Pan paniscus . In all six Pan troglodytes , the pectoralis minor was inserted at the supraspinatus tendon, while, in Pan paniscus and Homo sapiens , it was inserted at the coracoid process of the scapula. Some of the anatomic features and variations of these muscles in common chimpanzees and bonobos are similar to those found in humans, therefore enhancing our knowledge of primate comparative anatomy and evolution and also shedding light on several clinical issues.

  16. Inter- and Intraspecific Variations in the Pectoral Muscles of Common Chimpanzees (Pan troglodytes, Bonobos (Pan paniscus, and Humans (Homo sapiens

    Directory of Open Access Journals (Sweden)

    J. M. Potau

    2018-01-01

    Full Text Available We have analyzed anatomic variations in the pectoralis major and pectoralis minor muscles of common chimpanzees (Pan troglodytes and bonobos (Pan paniscus and compared them to anatomic variations in these muscles in humans (Homo sapiens. We have macroscopically dissected these muscles in six adult Pan troglodytes, five Pan paniscus of ages ranging from fetus to adult, and five adult Homo sapiens. Although Pan troglodytes are thought to lack a separate pectoralis abdominis muscle, we have identified this muscle in three of the Pan troglodytes; none of the Pan paniscus, however, had this muscle. We have also found deep supernumerary fascicles in the pectoralis major of two Pan troglodytes and all five Pan paniscus. In all six Pan troglodytes, the pectoralis minor was inserted at the supraspinatus tendon, while, in Pan paniscus and Homo sapiens, it was inserted at the coracoid process of the scapula. Some of the anatomic features and variations of these muscles in common chimpanzees and bonobos are similar to those found in humans, therefore enhancing our knowledge of primate comparative anatomy and evolution and also shedding light on several clinical issues.

  17. Understanding the LCA and ISO water footprint: A response to ...

    Science.gov (United States)

    Water footprinting has emerged as an important approach to assess water use related effects from consumption of goods and services. Assessment methods are proposed by two different communities, the Water Footprint Network (WFN) and the Life Cycle Assessment (LCA) community. The proposed methods are broadly similar and encompass both the computation of water use and its impacts, but differ in communication of a water footprint result. In this paper, we explain the role and goal of LCA and ISO-compatible water footprinting and resolve the six issues raised by Hoekstra (2016) in “A critique on the water-scarcity weighted water footprint in LCA”. By clarifying the concerns, we identify both the overlapping goals in the WFN and LCA water footprint assessments and discrepancies between them. The main differing perspective between the WFN and LCA-based approach seems to relate to the fact that LCA aims to account for environmental impacts, while the WFN aims to account for water productivity of global fresh water as a limited resource. We conclude that there is potential to use synergies in research for the two approaches and highlight the need for proper declaration of the methods applied. This paper advances efforts to understand ways to accurately capture use of water in life cycle analysis in other contexts. As the paper indicates, there is a discussion about whether quantities of water should be weighted by some local stress factor. This paper attempts to brid

  18. Carbon footprint evaluation at industrial park level: A hybrid life cycle assessment approach

    International Nuclear Information System (INIS)

    Dong, Huijuan; Geng, Yong; Xi, Fengming; Fujita, Tsuyoshi

    2013-01-01

    Industrial parks have become the effective strategies for government to promote sustainable economic development due to the following advantages: shared infrastructure and concentrated industrial activities within planned areas. However, due to intensive energy consumption and dependence on fossil fuels, industrial parks have become the main areas for greenhouse gas emissions. Therefore, it is critical to quantify their carbon footprints so that appropriate emission reduction policies can be raised. The objective of this paper is to seek an appropriate method on evaluating the carbon footprint of one industrial park. The tiered hybrid LCA method was selected due to its advantages over other methods. Shenyang Economic and Technological Development Zone (SETDZ), a typical comprehensive industrial park in China, was chosen as a case study park. The results show that the total life cycle carbon footprint of SETDZ was 15.29 Mt, including 6.81 Mt onsite (direct) carbon footprint, 8.47 Mt upstream carbon footprint, and only 3201 t downstream carbon footprint. Analysis from industrial sector perspectives shows that chemical industry and manufacture of general purpose machinery and special purposes machinery sector were the two largest sectors for life cycle carbon footprint. Such a sector analysis may be useful for investigation of appropriate emission reduction policies. - Highlights: ► A hybrid LCA model was employed to calculate industrial park carbon footprint. ► A case study on SETDZ is done. ► Life cycle carbon footprint of SETDZ is 15.29 Mt. ► Upstream and onsite carbon footprints account for 55.40% and 44.57%, respectively. ► Chemical industry and machinery manufacturing sectors are the two largest sectors

  19. Comparison of the carbon footprint of different patient diets in a Spanish hospital.

    Science.gov (United States)

    Vidal, Rosario; Moliner, Enrique; Pikula, Andrej; Mena-Nieto, Angel; Ortega, Agustín

    2015-01-01

    Mitigating climate change requires management strategies to reduce greenhouse gas emissions in any sector, including the health system. Carbon footprint calculations should play a key role in quantifying and communicating these emissions. Food is among the categories with low accuracy because the carbon footprint for food is still under development. We aimed to quantify the carbon footprint of different diets. Average carbon footprint for a normal diet was based on detailed composition data in Juan Ramón Jiménez Hospital (Huelva, Spain). In addition, the carbon footprints of 17 other therapeutic diets were estimated using a streamlined variation of each diet published by Benidorm Clinical Hospital (Spain). The carbon footprint was calculated for 18 hospital diets for a variety of patients. The reference menu corresponds to the normal diet provided to patients who do not have special dietary requirements. This menu has a low carbon footprint of 5.083 CO₂ eq/day. Hospital diets contribute to the carbon footprint of a hospital. The type of diet has a significant impact on the greenhouse gas emissions. A Mediterranean diet is associated with lower environmental impact than diets with more meat, in particular red meat. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  20. Skallerup Klit's carbon footprint

    DEFF Research Database (Denmark)

    Zacho, Kristina Overgaard; Ørnstrup, Niels Holm; Zimmermann, Tine Marquard

    by offsetting and without making actual emission reductions. Therefore the purpose of this study is to present recommendations on how Skallerup Klit can build up their business strategy using Carbon Footprint (CFP) as a tool. The CPF is calculated and assessed by using financial data in an Input-output LCA...

  1. Adding a nitrogen footprint to Colorado State University’s sustainability plan

    Science.gov (United States)

    Kimiecik, Jacob; Baron, Jill S.; Weinmann, Timothy; Taylor, Emily

    2017-01-01

    As a large land grant university with more than 32,000 students, Colorado State University has both on-campus non-agricultural and agricultural sources of nitrogen (N) released to the environment. We used the Nitrogen Footprint Tool to estimate the amount of N released from different sectors of the university for the CSU 2014 academic year. The largest on campus sources were food production, utilities (heating, cooling, electricity), and research animals. The total on-campus N footprint in 2014 was 287 metric tons. This value was equivalent to the nitrogen footprint of agricultural experiment stations and other agricultural facilities, whose nitrogen footprint was 273 metric tons. CSU has opportunities to reduce its on-campus footprint through educational programs promoting low-meat diets and commuting by bicycle or bus. There is also an opportunity to advance ideas of agricultural best management practices, including precision farming and better livestock management. This article describes the planned and ongoing efforts to educate CSU about how societal activities release nitrogen to the environment, contributing to global change. It offers personal and institutional options for taking action, which would ultimately reduce CSU’s excess reactive nitrogen loss to the environment. The N-footprint for CSU, including scenarios of possible future nitrogen reductions, is also discussed.

  2. Five propositions to harmonize environmental footprints of food and beverages

    NARCIS (Netherlands)

    Ponsioen, Tommie; Werf, Van Der H.M.G.

    2017-01-01

    Several attempts have been made to harmonize guidelines for environmental footprints of food and beverages. For example, the food Sustainable Consumption and Production Roundtable, the Leap partnership, and the Environmental Footprint project, in particular within the Cattle Model Working Group.

  3. Cold Spring Harbor symposia on quantitative biology: Volume 51, Molecular biology of /ital Homo sapiens/

    International Nuclear Information System (INIS)

    1986-01-01

    This volume is the second part of a collection of papers submitted by the participants to the 1986 Cold Spring Harbor Symposium on Quantitative Biology entitled Molecular Biology of /ital Homo sapiens/. The 49 papers included in this volume are grouped by subject into receptors, human cancer genes, and gene therapy. (DT)

  4. Klimaregnskab og Carbon Footprint beregning for Kommunekemi a/s

    DEFF Research Database (Denmark)

    Leinikka Dall, Ole; Wenzel, Henrik

    2009-01-01

    Klimaregnskab for anlægget i Nyborg og carbon footprint for: -forbrænding -uorganisk behandling -halmaskeanlæg Afrapporteret på tryk og indtastet i Simapro......Klimaregnskab for anlægget i Nyborg og carbon footprint for: -forbrænding -uorganisk behandling -halmaskeanlæg Afrapporteret på tryk og indtastet i Simapro...

  5. Comparison of carbon footprints of steel versus concrete pipelines for water transmission.

    Science.gov (United States)

    Chilana, Lalit; Bhatt, Arpita H; Najafi, Mohammad; Sattler, Melanie

    2016-05-01

    The global demand for water transmission and service pipelines is expected to more than double between 2012 and 2022. This study compared the carbon footprint of the two most common materials used for large-diameter water transmission pipelines, steel pipe (SP) and prestressed concrete cylinder pipe (PCCP). A planned water transmission pipeline in Texas was used as a case study. Four life-cycle phases for each material were considered: material production and pipeline fabrication, pipe transportation to the job site, pipe installation in the trench, and operation of the pipeline. In each phase, the energy consumed and the CO2-equivalent emissions were quantified. It was found that pipe manufacturing consumed a large amount of energy, and thus contributed more than 90% of life cycle carbon emissions for both kinds of pipe. Steel pipe had 64% larger CO2-eq emissions from manufacturing compared to PCCP. For the transportation phase, PCCP consumed more fuel due to its heavy weight, and therefore had larger CO2-eq emissions. Fuel consumption by construction equipment for installation of pipe was found to be similar for steel pipe and PCCP. Overall, steel had a 32% larger footprint due to greater energy used during manufacturing. This study compared the carbon footprint of two large-diameter water transmission pipeline materials, steel and prestressed concrete cylinder, considering four life-cycle phases for each. The study provides information that project managers can incorporate into their decision-making process concerning pipeline materials. It also provides information concerning the most important phases of the pipeline life cycle to target for emission reductions.

  6. Off-gas treatment carbon footprint calculator : form and function

    Energy Technology Data Exchange (ETDEWEB)

    Kessell, L. [Good EarthKeeping Organization Inc., Corona, CA (United States); Squire, J.; Crosby, K. [Haley and Aldrich Inc., Boston, MA (United States)

    2008-07-01

    Carbon footprinting is the measurement of the impact on the environment in terms of the amount of greenhouse gases produced, measured in units of carbon dioxide released directly and indirectly by an individual, organization, process, event or product. This presentation discussed an off-gas treatment carbon footprint calculator. The presentation provided a review of off-gas treatment technologies and presented a carbon footprint model. The model included: form and function; parameters; assumptions; calculations; and off-gas treatment applications. Parameters of the model included greenhouse gases listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change, such as carbon dioxide, methane, nitrous oxide, sulfur hexafluoride, hydrofluorocarbons, and perfluorocarbons. Assumptions of the model included stationary combustion emissions; mobile combustion emissions; indirect emissions; physical or chemical processing emissions; fugitive emissions; and de minimus emissions. The presentation also examined resource conservation and discussed three greenhouse gas footprint case studies. It was concluded that the model involved a calculator with standard calculations with clearly defined assumptions with boundaries. tabs., figs.

  7. San Diego Littoral Cell CRSMP Receiver Sites 2009

    Data.gov (United States)

    California Natural Resource Agency — A total of 27 possible placement sites (some with multiple placement footprints) are incorporated into this San Diego Coastal Regional Sediment Management Plan to...

  8. San Diego Littoral Cell CRSMP Receiver Sites 2009

    Data.gov (United States)

    California Department of Resources — A total of 27 possible placement sites (some with multiple placement footprints) are incorporated into this San Diego Coastal Regional Sediment Management Plan to...

  9. Baseline effects on carbon footprints of biofuels: The case of wood

    International Nuclear Information System (INIS)

    Johnson, Eric; Tschudi, Daniel

    2012-01-01

    As biofuel usage has boomed over the past decade, so has research and regulatory interest in its carbon accounting. This paper examines one aspect of that carbon accounting: the baseline, i.e. the reference case against which other conditions or changes can be compared. A literature search and analysis identified four baseline types: no baseline; reference point; marginal fossil fuel; and biomass opportunity cost. The fourth one, biomass opportunity cost, is defined in more detail, because this is not done elsewhere in the literature. The four baselines are then applied to the carbon footprint of a wood-fired power plant. The footprint of the resulting wood-fired electricity varies dramatically, according to the type of baseline. Baseline type is also found to be the footprint's most significant sensitivity. Other significant sensitivities are: efficiency of the power plant; the growth (or re-growth) rate of the forest that supplies the wood; and the residue fraction of the wood. Length of the policy horizon is also an important factor in determining the footprint. The paper concludes that because of their significance and variability, baseline choices should be made very explicit in biofuel carbon footprints. - Highlights: ► Four baseline types for biofuel footprinting are identified. ► One type, ‘biomass opportunity cost’, is defined mathematically and graphically. ► Choice of baseline can dramatically affect the footprint result. ► The ‘no baseline’ approach is not acceptable. ► Choice between the other three baselines depends on the question being addressed.

  10. Lebanese household carbon footprint: Measurements, analysis and challenges

    Science.gov (United States)

    Nasr, Rawad; Tall, Ibrahim; Nachabe, Nour; Chaaban, Farid

    2016-07-01

    The main purpose of this paper is to estimate the carbon footprint of a typical Lebanese household, and compare the results with international standards and trends. The estimation of this footprint will reflect the impact of the daily Lebanese household activities on the environment in terms of carbon dioxide emissions. The method used in estimating the carbon emissions is based on gathering the primary footprints from various household activities. Another proposed method that provides more accurate results is the estimation of emissions based on secondary footprint, which reflects the total emissions not only from the regular activities but also from a lifecycle perspective. Practical and feasible solutions were proposed to help reduce the amount of C02 emissions per household. This would lead to a better air quality, money savings, greenhouse gases emissions reduction and would ensure the sustainability and prosperity of future generations. A detailed survey was conducted in which the questions were focused mainly on energy, food, and transportation issues. The fourteen questions were addressed to one hundred families in different Lebanese regions coming from different social and economic backgrounds. This diversity would constitute a reflective sample of the actual Lebanese society, allowing us to extrapolate the gathered results on a national level.

  11. A carbon footprint simulation model for the cork oak sector

    International Nuclear Information System (INIS)

    Demertzi, Martha; Paulo, Joana Amaral; Arroja, Luís; Dias, Ana Cláudia

    2016-01-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. - Highlights: • A carbon footprint simulation model (CCFM) for the

  12. A carbon footprint simulation model for the cork oak sector

    Energy Technology Data Exchange (ETDEWEB)

    Demertzi, Martha, E-mail: marthademertzi@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Paulo, Joana Amaral, E-mail: joanaap@isa.ulisboa.pt [Center of Forest Studies (CEF), Superior Institute of Agronomy (ISA), Tapada da Ajuda, University of Lisbon, 1349-017 Lisbon (Portugal); Arroja, Luís, E-mail: arroja@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Dias, Ana Cláudia, E-mail: acdias@ua.pt [Center for Environmental and Marine Studies (CESAM), Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal)

    2016-10-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. - Highlights: • A carbon footprint simulation model (CCFM) for

  13. Variability of footprint ridge density and its use in estimation of sex in forensic examinations.

    Science.gov (United States)

    Krishan, Kewal; Kanchan, Tanuj; Pathania, Annu; Sharma, Ruchika; DiMaggio, John A

    2015-10-01

    The present study deals with a comparatively new biometric parameter of footprints called footprint ridge density. The study attempts to evaluate sex-dependent variations in ridge density in different areas of the footprint and its usefulness in discriminating sex in the young adult population of north India. The sample for the study consisted of 160 young adults (121 females) from north India. The left and right footprints were taken from each subject according to the standard procedures. The footprints were analysed using a 5 mm × 5 mm square and the ridge density was calculated in four different well-defined areas of the footprints. These were: F1 - the great toe on its proximal and medial side; F2 - the medial ball of the footprint, below the triradius (the triradius is a Y-shaped group of ridges on finger balls, palms and soles which forms the basis of ridge counting in identification); F3 - the lateral ball of the footprint, towards the most lateral part; and F4 - the heel in its central part where the maximum breadth at heel is cut by a perpendicular line drawn from the most posterior point on heel. This value represents the number of ridges in a 25 mm(2) area and reflects the ridge density value. Ridge densities analysed on different areas of footprints were compared with each other using the Friedman test for related samples. The total footprint ridge density was calculated as the sum of the ridge density in the four areas of footprints included in the study (F1 + F2 + F3 + F4). The results show that the mean footprint ridge density was higher in females than males in all the designated areas of the footprints. The sex differences in footprint ridge density were observed to be statistically significant in the analysed areas of the footprint, except for the heel region of the left footprint. The total footprint ridge density was also observed to be significantly higher among females than males. A statistically significant correlation

  14. Carbon footprint of shopping (grocery) bags in China, Hong Kong and India

    Science.gov (United States)

    Muthu, Subramanian Senthilkannan; Li, Y.; Hu, J. Y.; Mok, P. Y.

    2011-01-01

    Carbon footprint has become a term often used by the media in recent days. The human carbon footprint is professed to be a very serious global threat and every nation is looking at the possible options to reduce it since its consequences are alarming. A carbon footprint is a measure of the impact of human activities on earth and in particular on the environment; more specifically it relates to climate change and to the total amount of greenhouse gases produced, measured in units of carbon dioxide emitted. Effort of individuals in minimizing the carbon footprint is vital to save our planet. This article reports a study of the carbon footprint of various types of shopping bags (plastic, paper, non-woven and woven) using life cycle impact assessment (LCIA) technique in two stages. The first stage (baseline study), comprised the study of the impact of different types of shopping bags in the manufacturing phase, without considering their usage and disposal phases (cradle to gate stage). The LCIA was accomplished by the IPCC 2007 method, developed by the Inter Panel on Climate Change in SIMAPRO 7.2. The GWP (Global Warming Potential) values calculated by the IPCC 2007 method for 100 years were considered as a directive to compare the carbon footprint made by the different types of shopping bags under consideration. The next stage was the study of the carbon footprint of these bags including their usage and disposal phases (cradle to grave stage) and the results derived were compared with the results derived from the baseline study, which is the major focus of this research work. The values for usage and end-of-life phases were obtained from the survey questionnaire performed amongst different user groups of shopping bags in China, Hong Kong and India. The results show that the impact of different types of shopping bags in terms of their carbon footprint potential is very high if no usage and disposal options were provided. When the carbon footprint values from different

  15. Water Footprint and Virtual Water Trade of Brazil

    OpenAIRE

    da Silva, Vicente de Paulo R.; de Oliveira, Sonaly D.; Hoekstra, Arjen Ysbert; Neto, Jose Dantas; Campos, João Hugo B.C.; Braga, Celia C.; Araújo, Lincoln Eloi; Oliveira Aleixo, Danilo; de Brito, Jose Ivaldo B.; de Souza, Marcio Dionisio; de Holanda, Romildo M.

    2016-01-01

    Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international trade in the main agricultural commodities, as well as water scarcity, water self-sufficiency and water dependency per Brazilian region. While previous country studies on water footprints and virtual w...

  16. Evaluating the transitional mosaic: frameworks of change from Neanderthals to Homo sapiens in eastern Europe

    Science.gov (United States)

    Davies, William; White, Dustin; Lewis, Mark; Stringer, Chris

    2015-06-01

    Defining varying spatial and temporal analytical scales is essential before evaluating the responses of late Neanderthals and early Homo sapiens to Abrupt Environmental Transitions (AETs) and environmental disasters for the period 130-25 ka. Recent advances in addressing the population histories and interactions (using both genetic and archaeological evidence) of Neanderthals and H. sapiens have encouraged consideration of more subtle dynamics of archaeological change. Descriptions of change based on methodologies pioneered some 160 years ago are no longer adequate to explain the patterning we now see in the record. New chronological results, using multiple dating methods, allow us to begin to unpick the spatial and temporal scales of change. Isochronic markers (such as specific volcanic eruptions) can be used to create temporal frameworks (lattices), and results from other dating techniques compared against them. A combination of chronological lattices and direct dating of diagnostic artefacts and human fossils permits us, for the first time, to have greater confidence in connecting human (recent hominin) species and their behavioural responses to environmental conditions, and in quantifying scales of change over time and space (time-transgression). The timing of innovations, particularly those in bone, antler and ivory, can be directly quantified and tested, and used to re-evaluate longstanding models of cultural change. This paper also uses these new chronologies to explore the ecologies of late Neanderthals and early H. sapiens: their population densities, mobilities, resources exploited and possible interactions. Environmental productivity estimates are used to generate new questions of potential population densities and mobilities, and thus the sensitivity of these groups to environmental perturbations. Scales and intensities of effect on environments from natural disasters and AETs (notably Heinrich Events and the Campanian Ignimbrite eruption) are defined

  17. Earliest evidence of modern human life history in North African early Homo sapiens.

    Science.gov (United States)

    Smith, Tanya M; Tafforeau, Paul; Reid, Donald J; Grün, Rainer; Eggins, Stephen; Boutakiout, Mohamed; Hublin, Jean-Jacques

    2007-04-10

    Recent developmental studies demonstrate that early fossil hominins possessed shorter growth periods than living humans, implying disparate life histories. Analyses of incremental features in teeth provide an accurate means of assessing the age at death of developing dentitions, facilitating direct comparisons with fossil and modern humans. It is currently unknown when and where the prolonged modern human developmental condition originated. Here, an application of x-ray synchrotron microtomography reveals that an early Homo sapiens juvenile from Morocco dated at 160,000 years before present displays an equivalent degree of tooth development to modern European children at the same age. Crown formation times in the juvenile's macrodont dentition are higher than modern human mean values, whereas root development is accelerated relative to modern humans but is less than living apes and some fossil hominins. The juvenile from Jebel Irhoud is currently the oldest-known member of Homo with a developmental pattern (degree of eruption, developmental stage, and crown formation time) that is more similar to modern H. sapiens than to earlier members of Homo. This study also underscores the continuing importance of North Africa for understanding the origins of human anatomical and behavioral modernity. Corresponding biological and cultural changes may have appeared relatively late in the course of human evolution.

  18. AcquisitionFootprintAttenuationDrivenbySeismicAttributes

    Directory of Open Access Journals (Sweden)

    Cuellar-Urbano Mayra

    2014-04-01

    Full Text Available Acquisition footprint, one of the major problems that PEMEX faces in seismic imaging, is noise highly correlated to the geometric array of sources and receivers used for onshore and offshore seismic acquisitions. It prevails in spite of measures taken during acquisition and data processing. This pattern, throughout the image, is easily confused with geological features and misguides seismic attribute computation. In this work, we use seismic data from PEMEX Exploración y Producción to show the conditioning process for removing random and coherent noise using linear filters. Geometric attributes used in a workflow were computed for obtaining an acquisition footprint noise model and adaptively subtract it from the seismic data.

  19. Nitrogen footprints: Regional realities and options to reduce nitrogen loss to the environment.

    Science.gov (United States)

    Shibata, Hideaki; Galloway, James N; Leach, Allison M; Cattaneo, Lia R; Cattell Noll, Laura; Erisman, Jan Willem; Gu, Baojing; Liang, Xia; Hayashi, Kentaro; Ma, Lin; Dalgaard, Tommy; Graversgaard, Morten; Chen, Deli; Nansai, Keisuke; Shindo, Junko; Matsubae, Kazuyo; Oita, Azusa; Su, Ming-Chien; Mishima, Shin-Ichiro; Bleeker, Albert

    2017-03-01

    Nitrogen (N) management presents a sustainability dilemma: N is strongly linked to energy and food production, but excess reactive N causes environmental pollution. The N footprint is an indicator that quantifies reactive N losses to the environment from consumption and production of food and the use of energy. The average per capita N footprint (calculated using the N-Calculator methodology) of ten countries varies from 15 to 47 kg N capita -1 year -1 . The major cause of the difference is the protein consumption rates and food production N losses. The food sector dominates all countries' N footprints. Global connections via trade significantly affect the N footprint in countries that rely on imported foods and feeds. The authors present N footprint reduction strategies (e.g., improve N use efficiency, increase N recycling, reduce food waste, shift dietary choices) and identify knowledge gaps (e.g., the N footprint from nonfood goods and soil N process).

  20. Baseline effects on carbon footprints of biofuels: The case of wood

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Eric, E-mail: johnsonatlantic@gmail.com [Atlantic Consulting, 8136 Gattikon (Switzerland); Tschudi, Daniel [ETH, Berghaldenstrasse 46, 8800 Thalwil (Switzerland)

    2012-11-15

    As biofuel usage has boomed over the past decade, so has research and regulatory interest in its carbon accounting. This paper examines one aspect of that carbon accounting: the baseline, i.e. the reference case against which other conditions or changes can be compared. A literature search and analysis identified four baseline types: no baseline; reference point; marginal fossil fuel; and biomass opportunity cost. The fourth one, biomass opportunity cost, is defined in more detail, because this is not done elsewhere in the literature. The four baselines are then applied to the carbon footprint of a wood-fired power plant. The footprint of the resulting wood-fired electricity varies dramatically, according to the type of baseline. Baseline type is also found to be the footprint's most significant sensitivity. Other significant sensitivities are: efficiency of the power plant; the growth (or re-growth) rate of the forest that supplies the wood; and the residue fraction of the wood. Length of the policy horizon is also an important factor in determining the footprint. The paper concludes that because of their significance and variability, baseline choices should be made very explicit in biofuel carbon footprints. - Highlights: Black-Right-Pointing-Pointer Four baseline types for biofuel footprinting are identified. Black-Right-Pointing-Pointer One type, 'biomass opportunity cost', is defined mathematically and graphically. Black-Right-Pointing-Pointer Choice of baseline can dramatically affect the footprint result. Black-Right-Pointing-Pointer The 'no baseline' approach is not acceptable. Black-Right-Pointing-Pointer Choice between the other three baselines depends on the question being addressed.

  1. The carbon footprint of French people's consumption: evolution from 1990 to 2007

    International Nuclear Information System (INIS)

    Pasquier, Jean-Louis; Moreau, Sylvain; Bottin, Anne; Boitard, Corinne

    2012-03-01

    The carbon footprint calculated by the statistical service of the French ministry in charge of sustainable development represents the amount of greenhouse gases emitted in order to satisfy French consumption, including emissions connected to imports. In 2007, the carbon footprint per capita in France amounted to 12 tons of CO 2 -equivalent per year, compared to 8 tons per person emitted from the French metropolitan territory. From 1990 to 2007, the carbon footprint per capita increased by 5%, whereas the average per capita emissions on the territory decreased by 15%. During this period, emissions connected to imports increased by 64%, reaching almost 50% of the French carbon footprint in 2007. (author)

  2. Personal Water Footprint in Taiwan: A Case Study of Yunlin County

    Directory of Open Access Journals (Sweden)

    Yung-Jaan Lee

    2016-10-01

    Full Text Available Extreme weather events have affected the environment and water resources in Taiwan for the last two decades. Heavy rainfall, typhoons, and rising sea levels have caused severe flooding along the Southwest Coast in Taiwan. Yunlin County, an important agricultural region, will be significantly affected by climate changes, especially in coastal areas with severe land subsidence. Therefore, using the concept of the water footprint and questionnaire surveys, this study examines personal water footprints in townships in Yunlin County to explore the effectiveness and sustainability of water management. The purpose of the water footprint concept is to quantify environmental burdens imposed by individuals’ demand for water. An individual water footprint involves direct and indirect water usage that is associated with personal habits. Analytical results show that the most individual water consumption is highest along coastal areas, such as Kouhu and Taixi, and mountainous areas, such as Gukeng, Douliu, and Linnei. Furthermore, one-way ANOVA of individuals’ daily water footprint reveals that individual water footprints vary significantly among Douliu, Gukeng, and Mailiao. The mean daily water footprint per capita in Douliu and Gukeng significantly exceeds that in Mailiao. This study considers the location quotients of industries in these three townships, which indicate that the location quotients of the accommodation and food and beverage industries in Douliu and Gukeng significantly exceed those of Mailiao. The individual virtual water use that is associated with the aforementioned industries is large. Clearly, individual water use habits in townships are related to the industry type. Douliu and Gukeng are major centers of the tertiary industry, which has a higher location quotient than in Mailiao. Mailiao is a major center of manufacturing as a secondary industry. Therefore, flourishing regions with tertiary industries have high virtual water

  3. How China’s nitrogen footprint of food has changed from 1961 to 2010

    Science.gov (United States)

    Guo, Mengchu; Chen, Xiaohui; Bai, Zhaohai; Jiang, Rongfeng; Galloway, James N.; Leach, Allison M.; Cattaneo, Lia R.; Oenema, Oene; Ma, Lin; Zhang, Fusuo

    2017-10-01

    People have increased the amount of reactive nitrogen (Nr) in the environment as a result of food production methods and consumption choices. However, the connection between dietary choices and environmental impacts over time has not yet been studied in China. Here we combine a nitrogen footprint tool, the N-Calculator, with a food chain model, NUFER (NUtrient flows in Food chains, Environment and Resources use), to analyze the N footprint of food in China. We use the NUFER model to provide a detailed estimation of the amounts and forms of Nr released to the environment during food production, which is then used to calculate virtual nitrogen factors (VNFs, unit: kg N released/kg N in product) of major food items. The food N footprint consists of the food consumption N footprint and food production N footprint. The average per capita food N footprint increased from 4.7 kg N capita-1 yr-1 in the 1960s to 21 kg N capita-1 yr-1 in the 2000s, and the national food N footprint in China increased from 3.4 metric tons (MT) N yr-1 in the 1960s to 28 MT N yr-1 in the 2000s. The proportion of the food N footprint that is animal-derived increased from 37% to 54% during this period. The food production N footprint accounted for 84% of the national food N footprint in the 2000s, compared to 62% in the 1960s. More Nr has been added to the food production systems to produce enough food for a growing population that is increasing its per-capita food consumption. The increasing VNFs in China indicate that an increasing amount of Nr is being lost per unit of N embedded in food products consumed by humans in the past five decades. National N losses from food production increased from 6 MT N yr-1 in the 1960s to 23 MT N yr-1 in the 2000s. N was lost to the environment in four ways: ammonia (NH3) emissions and dinitrogen (N2) emissions through denitrification (each account for nearly 40%), N losses to water systems (20%), and nitrous oxide (N2O) emissions (1%). The average per

  4. Water footprints and 'pozas'

    NARCIS (Netherlands)

    Domínguez Guzmán, Carolina; Verzijl, Andres; Zwarteveen, Margreet

    2017-01-01

    In this article we present two logics of water efficiency: that of the Water Footprint and that of mango smallholder farmers on the desert coast of Peru (in Motupe). We do so in order to explore how both can learn from each other and to discuss what happens when the two logics meet. Rather than

  5. Teaching Quantitative Reasoning for Nonscience Majors through Carbon Footprint Analysis

    Science.gov (United States)

    Boose, David L.

    2014-01-01

    Quantitative reasoning is a key intellectual skill, applicable across disciplines and best taught in the context of authentic, relevant problems. Here, I describe and assess a laboratory exercise that has students calculate their "carbon footprint" and evaluate the impacts of various behavior choices on that footprint. Students gather…

  6. Carbon footprint of construction using industrialised building system

    Science.gov (United States)

    Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

    2017-11-01

    Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

  7. Cyber Security & Social Media: How Big is Your Digital Footprint and Why Should You Care

    OpenAIRE

    Rogers, Marcus

    2016-01-01

    With the popularity of social media sites such as Facebook, Twitter, Instagram etc. we find our selves more connected to cyberspace than at any previous time in history. This constant connectiveness and sharing of daily lives in almost realtime, has some serious implications for cyber security and privacy. The talk will discuss the very real threat of our ever growing digital footprint, and what if anything we can do to mitigate the risks.

  8. FOOTPRINTS FOR SUSTAINABILITY: THE NEXT STEPS

    Science.gov (United States)

    This paper discusses the strengths and weaknesses of the ecological footprint as an ecological accounting method, points out research needs for improvement of the analysis, and suggests potential new applications.

  9. Tracking the global footprint of fisheries

    Science.gov (United States)

    Kroodsma, David A.; Mayorga, Juan; Hochberg, Timothy; Miller, Nathan A.; Boerder, Kristina; Ferretti, Francesco; Wilson, Alex; Bergman, Bjorn; White, Timothy D.; Block, Barbara A.; Woods, Paul; Sullivan, Brian; Costello, Christopher; Worm, Boris

    2018-02-01

    Although fishing is one of the most widespread activities by which humans harvest natural resources, its global footprint is poorly understood and has never been directly quantified. We processed 22 billion automatic identification system messages and tracked >70,000 industrial fishing vessels from 2012 to 2016, creating a global dynamic footprint of fishing effort with spatial and temporal resolution two to three orders of magnitude higher than for previous data sets. Our data show that industrial fishing occurs in >55% of ocean area and has a spatial extent more than four times that of agriculture. We find that global patterns of fishing have surprisingly low sensitivity to short-term economic and environmental variation and a strong response to cultural and political events such as holidays and closures.

  10. THE PROPOSED ALUMINA INDUSTRY AND HOW TO MITIGATE AGAINST THE RED MUD FOOTPRINT IN GHANA

    Directory of Open Access Journals (Sweden)

    S. K. Y. Gawu

    2012-01-01

    Full Text Available Bauxite tailings, also known as red mud, are often generated in vast quantities by extracting alumina from bauxites. The relatively complex composition of the red mud, an insoluble residue from bauxite processing, coupled with its fine particle size distribution, high pH, poor settling properties and some toxic rare metal associations, make its disposal problematic. Two locations are being considered for the sitting of a bauxite refinery in Ghana. Since large quantities of tailings is expected to be produced at a selected site efforts need to be geared towards its management to ensure that the red mud footprint is not repeated in Ghana as happened elsewhere. This paper considers the two proposed sites and applies a site ranking criteria to identify the most suitable site, as well as an environmentally suitable disposal technology based on the selected site conditions and the general red mud characteristics. This study could serve as a sustainable development approach in site selection and the choice of disposal technologies.

  11. Post No Photos, Leave No Trace: Children's Digital Footprint Management Strategies

    Science.gov (United States)

    Buchanan, Rachel; Southgate, Erica; Smith, Shamus P.; Murray, Tiana; Noble, Brittany

    2017-01-01

    Given that today's children are prolific users of the internet, concern has been raised about the future impact of the digital footprints they are currently generating. Here, we report on the "Best Footprint Forward" project which utilised focus groups to investigate the digital footprint awareness of 33 children (ranging in age from 10…

  12. Distal Insertional Footprint of the Brachialis Muscle: 3D Morphometric Study

    Directory of Open Access Journals (Sweden)

    Srinath Kamineni

    2015-01-01

    Full Text Available Objective. The purpose of this study is to describe the three-dimensional morphometry of the brachialis muscle at its distal attachment to the ulna. Methods. Fifty cadaveric elbows were dissected and the brachialis distal insertion was isolated on the ulna bone and probed with a three-dimensional digitizer, to create a three-dimensional model of the footprint. Measurements and analysis of each footprint shape were recorded and compared based on gender and size. Results. There was significant gender difference in the surface length (P= 0.002 and projected length (P= 0.001 of the brachialis footprint. The shapes of the footprint also differed among the specimens. Conclusion. The shape of the brachialis muscle insertion differed among all the specimens without significant variation in gender or sides. There was also a significant difference in muscle length between males and females with little difference in the width and surface area. Significance. The information obtained from this study is important for kinematic understanding and surgical procedures around the elbow joint as well as the understanding of the natural age related anatomy of the brachialis footprint morphology.

  13. Evaluating a small footprint, waveform-resolving lidar over coastal vegetation communities

    Science.gov (United States)

    Nayegandhl, A.; Brock, J.C.; Wright, C.W.; O'Connell, M. J.

    2006-01-01

    NASA's Experimental Advanced Airborne Research Lidar (EAARL) is a raster-scanning, waveform-resolving, green-wavelength (532 nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor records the time history of the return waveform within a small footprint (20 cm diameter) for each laser pulse, enabling characterization of vegetation canopy structure and "bare earth" topography under a variety of vegetation types. A collection of individual waveforms combined within a synthesized large footprint was used to define three metrics: canopy height (CH), canopy reflection ratio (CRR), and height of median energy (HOME). Bare Earth Elevation (BEE) metric was derived using the individual small-footprint waveforms. All four metrics were tested for reproducibility, which resulted in an average of 95 percent correspondence within two standard deviations of the mean. CH and BEE values were also tested for accuracy using ground-truth data. The results presented in this paper show that combining several individual small-footprint laser pulses to define a composite "large-footprint" waveform is a possible method to depict the vertical structure of a vegetation canopy. ?? 2006 American Society for Photogrammetry and Remote Sensing.

  14. Income-based projections of water footprint of food consumption in Uzbekistan

    Science.gov (United States)

    Djanibekov, Nodir; Frohberg, Klaus; Djanibekov, Utkur

    2013-11-01

    Assessing future water requirements for feeding the growing population of Central Asia can improve understanding of the projected water supply scenarios in the region. Future water requirements will be partially determined by the dietary habits of the populations, and are thus responsive to significant variation of income levels. Using Uzbekistan as an example, this study projects the water footprints of income driven changes on the population's diet in Central Asia. To reveal the influence of large income changes on dietary habits a Normalized Quadratic-Quadratic Expenditure System was calibrated and applied to data from 2009. The national water footprints of food consumption in Uzbekistan were projected until 2034 by applying the parameterized demand system to estimate the respective water footprint values. The results showed that for Uzbekistan the projected increase in the food consumption water footprint would be primarily linked to income growth rather than population growth. Due to the high water footprint of common food products, the composition of the population's diet, and responsiveness to income, economic growth is expected to put greater pressure on water resources in Uzbekistan unless proper measures are undertaken.

  15. Quantifying carbon footprint reduction opportunities for U.S. households and communities.

    Science.gov (United States)

    Jones, Christopher M; Kammen, Daniel M

    2011-05-01

    Carbon management is of increasing interest to individuals, households, and communities. In order to effectively assess and manage their climate impacts, individuals need information on the financial and greenhouse gas benefits of effective mitigation opportunities. We use consumption-based life cycle accounting techniques to quantify the carbon footprints of typical U.S. households in 28 cities for 6 household sizes and 12 income brackets. The model includes emissions embodied in transportation, energy, water, waste, food, goods, and services. We further quantify greenhouse gas and financial savings from 13 potential mitigation actions across all household types. The model suggests that the size and composition of carbon footprints vary dramatically between geographic regions and within regions based on basic demographic characteristics. Despite these differences, large cash-positive carbon footprint reductions are evident across all household types and locations; however, realizing this potential may require tailoring policies and programs to different population segments with very different carbon footprint profiles. The results of this model have been incorporated into an open access online carbon footprint management tool designed to enable behavior change at the household level through personalized feedback.

  16. [Dynamic changes of ecological footprint and ecological capacity in Fujian Province].

    Science.gov (United States)

    Weng, Boqi; Wang, Yixiang; Huang, Yibin; Ying, Zhaoyang; Huang, Qinlou

    2006-11-01

    The analysis on the dynamic changes of ecological footprint and ecological capacity in Fujian Province showed that in 1999-2003, the ecological footprint per capita in the Province increased from 1.428 hm2 to 1.658 hm2, while the ecological capacity per capita decreased from 0.683 hm2 to 0.607 hm2, with an increased ecological deficit year after year. The contradiction between the ecological footprint and ecological capacity pricked up gradually, and the ecological environment was at risk. There existed a severe imbalance in the supply and demand of ecological footprint per capita. The main body of the demands was grassland and fossil fuel, accouting for 55.74% - 63.43% of the total, while their supply only occupied 0.77% - 0.82% and next to nothing of the ecological capacity per capita, respectively. As a whole, the ecological footprint per ten thousand yuan GDP declined in the five years, indicating that the resources use efficiency in the Province was improved gradually. Based on the analysis of the present situation of the economic development and resources distribution in the Province, the strategies on reducing ecological deficit were put forward.

  17. Research on the influencing factors of reverse logistics carbon footprint under sustainable development.

    Science.gov (United States)

    Sun, Qiang

    2017-10-01

    With the concerns of ecological and circular economy along with sustainable development, reverse logistics has attracted the attention of enterprise. How to achieve sustainable development of reverse logistics has important practical significance of enhancing low carbon competitiveness. In this paper, the system boundary of reverse logistics carbon footprint is presented. Following the measurement of reverse logistics carbon footprint and reverse logistics carbon capacity is provided. The influencing factors of reverse logistics carbon footprint are classified into five parts such as intensity of reverse logistics, energy structure, energy efficiency, reverse logistics output, and product remanufacturing rate. The quantitative research methodology using ADF test, Johansen co-integration test, and impulse response is utilized to interpret the relationship between reverse logistics carbon footprint and the influencing factors more accurately. This research finds that energy efficiency, energy structure, and product remanufacturing rate are more capable of inhibiting reverse logistics carbon footprint. The statistical approaches will help practitioners in this field to structure their reverse logistics activities and also help academics in developing better decision models to reduce reverse logistics carbon footprint.

  18. Human footprints on greenhouse gas fluxes in cryogenic ecosystems

    Science.gov (United States)

    Karelin, D. V.; Goryachkin, S. V.; Zamolodchikov, D. G.; Dolgikh, A. V.; Zazovskaya, E. P.; Shishkov, V. A.; Kraev, G. N.

    2017-12-01

    Various human footprints on the flux of biogenic greenhouse gases from permafrost-affected soils in Arctic and boreal domains in Russia are considered. Tendencies of significant growth or suppression of soil CO2 fluxes change across types of human impact. Overall, the human impacts increase the mean value and variance of local soil CO2 flux. Human footprint on methane exchange between soil and atmosphere is mediated by drainage. However, all the types of human impact suppress the sources and increase sinks of methane to the land ecosystems. N2O flux grew under the considered types of human impact. Based on the results, we suggest that human footprint on soil greenhouse gases fluxes is comparable to the effect of climate change at an annual to decadal timescales.

  19. Water Footprints and Sustainable Water Allocation

    Directory of Open Access Journals (Sweden)

    Arjen Y. Hoekstra

    2015-12-01

    Full Text Available Water Footprint Assessment (WFA is a quickly growing research field. This Special Issue contains a selection of papers advancing the field or showing innovative applications. The first seven papers are geographic WFA studies, from an urban to a continental scale; the next five papers have a global scope; the final five papers focus on water sustainability from the business point of view. The collection of papers shows that the historical picture of a town relying on its hinterland for its supply of water and food is no longer true: the water footprint of urban consumers is global. It has become clear that wise water governance is no longer the exclusive domain of government, even though water is and will remain a public resource with government in a primary role. With most water being used for producing our food and other consumer goods, and with product supply chains becoming increasingly complex and global, there is a growing awareness that consumers, companies and investors also have a key role. The interest in sustainable water use grows quickly, in both civil society and business communities, but the poor state of transparency of companies regarding their direct and indirect water use implies that there is still a long way to go before we can expect that companies effectively contribute to making water footprints more sustainable at a relevant scale.

  20. Characteristics of the water footprint of rice production under different rainfall years in Jilin Province, China.

    Science.gov (United States)

    Li, Hongying; Qin, Lijie; He, Hongshi

    2018-06-01

    Rice is a special crop, and its production differs from that of other crops because it requires a thin layer of water coverage for a long period. The calculation of the water footprint of rice production should differ from that of other crops owing to the rice growing process. This study improved the calculation of blue and grey water footprints of rice production and analyzed the variations in the water footprints for rice production under different rainfall years in Jilin Province. In the drought year, the green water footprint was the lowest and the blue water footprint was the highest among the three years, while in the humid year, the green water footprint was the highest and the blue water footprint was not the lowest. The areas with higher water footprints were found in the east and west regions of Jilin Province, while the areas with lower water footprints were found in the middle east and middle regions of Jilin Province. Blue water was the primary water resource for rice production, although more precipitation provided the highest green water in the humid year; also, the spatial distributions of water footprints were not the same under different rainfall years. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  1. Does footprint depth correlate with foot motion and pressure?

    OpenAIRE

    Bates, K. T.; Savage, R.; Pataky, T. C.; Morse, S. A.; Webster, E.; Falkingham, P. L.; Ren, L.; Qian, Z.; Collins, D.; Bennett, M. R.; McClymont, J.; Crompton, R. H.

    2013-01-01

    Footprints are the most direct source of evidence about locomotor biomechanics in extinct vertebrates. One of the principal suppositions underpinning biomechanical inferences is that footprint geometry correlates with dynamic foot pressure, which, in turn, is linked with overall limb motion of the trackmaker. In this study, we perform the first quantitative test of this long-standing assumption, using topological statistical analysis of plantar pressures and experimental and computer-simulate...

  2. Data of 10 SSR markers for genomes of homo sapiens and monkeys.

    Science.gov (United States)

    Reddy, K K V V V S; Raju, S Viswanadha; Someswara Rao, Chinta

    2017-06-01

    In this data, we present 10 Simple Sequence Repeat(SSR) markers TAGA, TCAT, GAAT, AGAT, AGAA, GATA, TATC, CTTT, TCTG and TCTA which are extracted from the genomes of homo sapiens and monkeys using string matching mechanism [1]. All loci showed 4 Base Pair(bp) in allele size, indicating that there are some polymorphisms between individuals correlating to the number of SSR repeats that maybe useful for the detection of similarity among the genotypes. Collectively, these data show that the SSR extraction is a valuable method to illustrate genetic variation of genomes.

  3. Metal footprint linked to economy

    Science.gov (United States)

    Burke, Paul J.

    2018-04-01

    The annual quantity of metal being used by humans has been on the rise. A new analysis of 43 major economies reveals the extent to which year-to-year fluctuations in metal footprints have been in lockstep with countries' economic growth and changes in investment spending.

  4. Hydropower's Biogenic Carbon Footprint.

    Science.gov (United States)

    Scherer, Laura; Pfister, Stephan

    2016-01-01

    Global warming is accelerating and the world urgently needs a shift to clean and renewable energy. Hydropower is currently the largest renewable source of electricity, but its contribution to climate change mitigation is not yet fully understood. Hydroelectric reservoirs are a source of biogenic greenhouse gases and in individual cases can reach the same emission rates as thermal power plants. Little is known about the severity of their emissions at the global scale. Here we show that the carbon footprint of hydropower is far higher than previously assumed, with a global average of 173 kg CO2 and 2.95 kg CH4 emitted per MWh of electricity produced. This results in a combined average carbon footprint of 273 kg CO2e/MWh when using the global warming potential over a time horizon of 100 years (GWP100). Nonetheless, this is still below that of fossil energy sources without the use of carbon capture and sequestration technologies. We identified the dams most promising for capturing methane for use as alternative energy source. The spread among the ~1500 hydropower plants analysed in this study is large and highlights the importance of case-by-case examinations.

  5. Hydropower's Biogenic Carbon Footprint

    Science.gov (United States)

    Pfister, Stephan

    2016-01-01

    Global warming is accelerating and the world urgently needs a shift to clean and renewable energy. Hydropower is currently the largest renewable source of electricity, but its contribution to climate change mitigation is not yet fully understood. Hydroelectric reservoirs are a source of biogenic greenhouse gases and in individual cases can reach the same emission rates as thermal power plants. Little is known about the severity of their emissions at the global scale. Here we show that the carbon footprint of hydropower is far higher than previously assumed, with a global average of 173 kg CO2 and 2.95 kg CH4 emitted per MWh of electricity produced. This results in a combined average carbon footprint of 273 kg CO2e/MWh when using the global warming potential over a time horizon of 100 years (GWP100). Nonetheless, this is still below that of fossil energy sources without the use of carbon capture and sequestration technologies. We identified the dams most promising for capturing methane for use as alternative energy source. The spread among the ~1500 hydropower plants analysed in this study is large and highlights the importance of case-by-case examinations. PMID:27626943

  6. Water Footprint Assessment in the Agro-industry: A Case Study of Soy Sauce Production

    Science.gov (United States)

    Firda, Alfiana Aulia; Purwanto

    2018-02-01

    In terms of global water scarcity, the water footprint is an indicator of the use of water resources that given knowledge about the environmental impact of consuming a product. The sustainable use of water resources nowadays bring challenges related to the production and consumption phase of water intensive related goods such as in the agro-industry. The objective of the study was to assessment the total water footprint from soy sauce production in Grobogan Regency. The total water footprint is equal to the sum of the supply chain water footprint and the operational water footprint. The assessment is based on the production chain diagram of soy sauce production which presenting the relevant process stages from the source to the final product. The result of this research is the total water footprint of soy sauce production is 1.986,35 L/kg with fraction of green water 78,43%, blue water 21,4% and gray water 0,17%.

  7. Water Footprint Assessment in the Agro-industry: A Case Study of Soy Sauce Production

    Directory of Open Access Journals (Sweden)

    Aulia Firda Alfiana

    2018-01-01

    Full Text Available In terms of global water scarcity, the water footprint is an indicator of the use of water resources that given knowledge about the environmental impact of consuming a product. The sustainable use of water resources nowadays bring challenges related to the production and consumption phase of water intensive related goods such as in the agro-industry. The objective of the study was to assessment the total water footprint from soy sauce production in Grobogan Regency. The total water footprint is equal to the sum of the supply chain water footprint and the operational water footprint. The assessment is based on the production chain diagram of soy sauce production which presenting the relevant process stages from the source to the final product. The result of this research is the total water footprint of soy sauce production is 1.986,35 L/kg with fraction of green water 78,43%, blue water 21,4% and gray water 0,17%.

  8. Atmospheric particulate matter within the Sudbury footprint

    Energy Technology Data Exchange (ETDEWEB)

    Koski, P. [Laurentian Univ., Sudbury, ON (Canada); Spiers, G.A. [Laurentian Univ., Sudbury, ON (Canada). Centre for Environmental Monitoring

    2007-07-01

    In order to assess health and risks to ecosystems, measuring exposure to coarse, fine and ultrafine dust and their association with metals in the air is necessary. This paper presented the results of a study that investigated the concentration, particle size distribution and spatial dispersion of metals in total and fractioned airborne dust. The study involved collection of airborne dust samples at five different sites over a one year period in the Sudbury area, including one control site located downwind of the south-westerly most industrial emission source. The paper discussed the goals and objectives of the project which included analysis of total concentration of particulate matter (PM) within various size fractions; analysis of concentration of selected metals such as arsenic, zinc, copper, nickel, cobalt, iron, manganese, chromium and lead as well as the species of sulphur within those size fractions; delineation between particle chemistry of both short and long range transport origin; determining the effects of the different seasons on PM concentrations, and establish any seasonal/temperature trends that may occur. The paper also discussed the methodology for the study with reference to sampling sites, sampling equipment, sampling schedule, mass determination, and chemical analysis. X-ray Fluorescence (XRF) was used to determine the total metals concentration in airborne dust. The results of the study were also presented. It was concluded that PM analysis within the Sudbury footprint indicated that the finer fractions primarily contained the highest weight and metal concentration. In addition, sulphate seemed to be the only species of sulphur present in the different size fractions at each site. 22 refs., 4 tabs., 5 figs.

  9. Atmospheric particulate matter within the Sudbury footprint

    International Nuclear Information System (INIS)

    Koski, P.; Spiers, G.A.

    2007-01-01

    In order to assess health and risks to ecosystems, measuring exposure to coarse, fine and ultrafine dust and their association with metals in the air is necessary. This paper presented the results of a study that investigated the concentration, particle size distribution and spatial dispersion of metals in total and fractioned airborne dust. The study involved collection of airborne dust samples at five different sites over a one year period in the Sudbury area, including one control site located downwind of the south-westerly most industrial emission source. The paper discussed the goals and objectives of the project which included analysis of total concentration of particulate matter (PM) within various size fractions; analysis of concentration of selected metals such as arsenic, zinc, copper, nickel, cobalt, iron, manganese, chromium and lead as well as the species of sulphur within those size fractions; delineation between particle chemistry of both short and long range transport origin; determining the effects of the different seasons on PM concentrations, and establish any seasonal/temperature trends that may occur. The paper also discussed the methodology for the study with reference to sampling sites, sampling equipment, sampling schedule, mass determination, and chemical analysis. X-ray Fluorescence (XRF) was used to determine the total metals concentration in airborne dust. The results of the study were also presented. It was concluded that PM analysis within the Sudbury footprint indicated that the finer fractions primarily contained the highest weight and metal concentration. In addition, sulphate seemed to be the only species of sulphur present in the different size fractions at each site. 22 refs., 4 tabs., 5 figs

  10. Baseline ecological footprint of Sandia National Laboratories, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Coplen, Amy K.; Mizner, Jack Harry,; Ubechel, Norion M.

    2009-01-01

    The Ecological Footprint Model is a mechanism for measuring the environmental effects of operations at Sandia National Laboratories in Albuquerque, New Mexico (SNL/NM). This analysis quantifies environmental impact associated with energy use, transportation, waste, land use, and water consumption at SNL/NM for fiscal year 2005 (FY05). Since SNL/NMs total ecological footprint (96,434 gha) is greater than the waste absorption capacity of its landholdings (338 gha), it created an ecological deficit of 96,096 gha. This deficit is equal to 886,470lha, or about 3,423 square miles of Pinyon-Juniper woodlands and desert grassland. 89% of the ecological footprint can be attributed to energy use, indicating that in order to mitigate environmental impact, efforts should be focused on energy efficiency, energy reduction, and the incorporation of additional renewable energy alternatives at SNL/NM.

  11. Foot-printing of Protein Interactions by Tritium Labeling

    International Nuclear Information System (INIS)

    Mousseau, Guillaume; Thomas, Olivier P.; Agez, Morgane; Thai, Robert; Cintrat, Jean-Christophe; Rousseau, Bernard; Raffy, Quentin; Renault, Jean Philippe; Pin, Serge; Ochsenbein, Francoise

    2010-01-01

    A new foot-printing method for mapping protein interactions has been developed, using tritium as a radioactive label. As residues involved in an interaction are less labeled when the complex is formed, they can be identified via comparison of the tritium incorporation of each residue of the bound protein with that of the unbound one. Application of this foot-printing method to the complex formed by the histone H3 fragment H3 122-135 and the protein hAsflA 1-156 afforded data in good agreement with NMR results. (authors)

  12. The human footprint in the west: a large-scale analysis of anthropogenic impacts.

    Science.gov (United States)

    Leu, M.; Hanser, S.E.; Knick, S.T.

    2008-01-01

    Anthropogenic features such as urbanization, roads, and power lines, are increasing in western United States landscapes in response to rapidly growing human populations. However, their spatial effects have not been evaluated. Our goal was to model the human footprint across the western United States. We first delineated the actual area occupied by anthropogenic features, the physical effect area. Next, we developed the human footprint model based on the ecological effect area, the zone influenced by features beyond their physical presence, by combining seven input models: three models quantified top-down anthropogenic influences of synanthropic predators (avian predators, domestic dog and cat presence risk), and four models quantified bottom-up anthropogenic influences on habitat (invasion of exotic plants, human-caused fires, energy extraction, and anthropogenic wildland fragmentation). Using independent bird population data, we found bird abundance of four synanthropic species to correlate positively with human footprint intensity and negatively for three of the six species influenced by habitat fragmentation. We then evaluated the extent of the human footprint in relation to terrestrial (ecoregions) and aquatic systems (major rivers and lakes), regional management and conservation status, physical environment, and temporal changes in human actions. The physical effect area of anthropogenic features covered 13% of the western United States with agricultural land (9.8%) being most dominant. High-intensity human footprint areas (class 8–10) overlapped highly productive low-elevation private landholdings and covered 7% of the western United States compared to 48% for low-intensity areas (class 1–3), which were confined to low-productivity high-elevation federal landholdings. Areas within 1 km of rivers were more affected by the human footprint compared to lakes. Percentage human population growth was higher in low-intensity human footprint areas. The

  13. Reply to Ridoutt and Huang: From water footprint assessment to policy

    NARCIS (Netherlands)

    Hoekstra, Arjen Y.; Mekonnen, Mesfin

    2012-01-01

    According to Ridoutt and Huang (1), “environmental relevance must be taken into consideration if water footprints are to inform wise decision making and policy development.” Indeed, reduction targets regarding water footprints (WFs) within catchments should be formulated on the basis of relative

  14. Fine-resolution Modeling of Urban-Energy Systems' Water Footprint in River Networks

    Science.gov (United States)

    McManamay, R.; Surendran Nair, S.; Morton, A.; DeRolph, C.; Stewart, R.

    2015-12-01

    Characterizing the interplay between urbanization, energy production, and water resources is essential for ensuring sustainable population growth. In order to balance limited water supplies, competing users must account for their realized and virtual water footprint, i.e. the total direct and indirect amount of water used, respectively. Unfortunately, publicly reported US water use estimates are spatially coarse, temporally static, and completely ignore returns of water to rivers after use. These estimates are insufficient to account for the high spatial and temporal heterogeneity of water budgets in urbanizing systems. Likewise, urbanizing areas are supported by competing sources of energy production, which also have heterogeneous water footprints. Hence, a fundamental challenge of planning for sustainable urban growth and decision-making across disparate policy sectors lies in characterizing inter-dependencies among urban systems, energy producers, and water resources. A modeling framework is presented that provides a novel approach to integrate urban-energy infrastructure into a spatial accounting network that accurately measures water footprints as changes in the quantity and quality of river flows. River networks (RNs), i.e. networks of branching tributaries nested within larger rivers, provide a spatial structure to measure water budgets by modeling hydrology and accounting for use and returns from urbanizing areas and energy producers. We quantify urban-energy water footprints for Atlanta, GA and Knoxville, TN (USA) based on changes in hydrology in RNs. Although water intakes providing supply to metropolitan areas were proximate to metropolitan areas, power plants contributing to energy demand in Knoxville and Atlanta, occurred 30 and 90km outside the metropolitan boundary, respectively. Direct water footprints from urban landcover primarily comprised smaller streams whereas indirect footprints from water supply reservoirs and energy producers included

  15. Future electricity: the challenge of reducing both carbon and water footprint

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

    2016-01-01

    We estimate the consumptive water footprint (WF) of electricity and heat in 2035 for the four energy scenarios of the International Energy Agency (IEA) and a fifth scenario with a larger percentage of solar energy. Counter-intuitively, the ‘greenest’ IEA scenario (with the smallest carbon footprint)

  16. Mapping the carbon footprint of EU regions

    Science.gov (United States)

    Ivanova, Diana; Vita, Gibran; Steen-Olsen, Kjartan; Stadler, Konstantin; Melo, Patricia C.; Wood, Richard; Hertwich, Edgar G.

    2017-05-01

    While the EU Commission has encouraged Member States to combine national and international climate change mitigation measures with subnational environmental policies, there has been little harmonized effort towards the quantification of embodied greenhouse gas (GHG) emissions from household consumption across European regions. This study develops an inventory of carbon footprints associated with household consumption for 177 regions in 27 EU countries, thus, making a key contribution for the incorporation of consumption-based accounting into local decision-making. Footprint calculations are based on consumer expenditure surveys and environmental and trade detail from the EXIOBASE 2.3 multiregional input-output database describing the world economy in 2007 at the detail of 43 countries, 5 rest-of-the-world regions and 200 product sectors. Our analysis highlights the spatial heterogeneity of embodied GHG emissions within multiregional countries with subnational ranges varying widely between 0.6 and 6.5 tCO2e/cap. The significant differences in regional contribution in terms of total and per capita emissions suggest notable differences with regards to climate change responsibility. The study further provides a breakdown of regional emissions by consumption categories (e.g. housing, mobility, food). In addition, our region-level study evaluates driving forces of carbon footprints through a set of socio-economic, geographic and technical factors. Income is singled out as the most important driver for a region’s carbon footprint, although its explanatory power varies significantly across consumption domains. Additional factors that stand out as important on the regional level include household size, urban-rural typology, level of education, expenditure patterns, temperature, resource availability and carbon intensity of the electricity mix. The lack of cross-national region-level studies has so far prevented analysts from drawing broader policy conclusions that hold

  17. Impacts of software and its engineering on the carbon footprint of ICT

    Energy Technology Data Exchange (ETDEWEB)

    Kern, Eva, E-mail: e.kern@umwelt-campus.de [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany); Dick, Markus, E-mail: sustainablesoftwareblog@gmail.com [Fritz-Wunderlich-Straße 14, D-66869 Kusel (Germany); Naumann, Stefan, E-mail: s.naumann@umwelt-campus.de [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany); Hiller, Tim, E-mail: tim.hiller@gmx.com [Institute for Software Systems, Environmental Campus Birkenfeld, Campusallee, D-55761 Birkenfeld (Germany)

    2015-04-15

    The energy consumption of information and communication technology (ICT) is still increasing. Even though several solutions regarding the hardware side of Green IT exist, the software contribution to Green IT is not well investigated. The carbon footprint is one way to rate the environmental impacts of ICT. In order to get an impression of the induced CO{sub 2} emissions of software, we will present a calculation method for the carbon footprint of a software product over its life cycle. We also offer an approach on how to integrate some aspects of carbon footprint calculation into software development processes and discuss impacts and tools regarding this calculation method. We thus show the relevance of energy measurements and the attention to impacts on the carbon footprint by software within Green Software Engineering.

  18. Impacts of software and its engineering on the carbon footprint of ICT

    International Nuclear Information System (INIS)

    Kern, Eva; Dick, Markus; Naumann, Stefan; Hiller, Tim

    2015-01-01

    The energy consumption of information and communication technology (ICT) is still increasing. Even though several solutions regarding the hardware side of Green IT exist, the software contribution to Green IT is not well investigated. The carbon footprint is one way to rate the environmental impacts of ICT. In order to get an impression of the induced CO 2 emissions of software, we will present a calculation method for the carbon footprint of a software product over its life cycle. We also offer an approach on how to integrate some aspects of carbon footprint calculation into software development processes and discuss impacts and tools regarding this calculation method. We thus show the relevance of energy measurements and the attention to impacts on the carbon footprint by software within Green Software Engineering

  19. What Is My Carbon Footprint?

    Science.gov (United States)

    Galluzzo, Benjamin J.; McGivney-Burelle, Jean; Wagstrom, Rikki B.

    2016-01-01

    Human beings are having a profound impact on the environment. The opportunity to investigate this timely issue during one or two class periods gives algebra and precalculus students insight into a sustainability topic of great international concern--carbon footprints. Students use mathematical thinking in matters that are pertinent to their…

  20. Ecotourism versus Mass Tourism. A Comparison of Environmental Impacts Based on Ecological Footprint Analysis

    Directory of Open Access Journals (Sweden)

    Jérôme Ballet

    2012-01-01

    Full Text Available Academic and policy interest in ecological footprint analysis has grown rapidly in recent years. To date, however, the application of ecological footprint analysis to tourism has been limited. This article aims to discuss the potential of ecological footprint analysis to assess sustainability in tourism. It is about a comparison of the global environmental impacts of different forms of tourism in southern countries where tourism is a major source of foreign exchange earnings. It illustrates how an ecotourism destination has a larger ecological footprint than a “mass” tourism destination.

  1. A first empirical comparison of energy Footprints embodied in trade. MRIO versus PLUM

    International Nuclear Information System (INIS)

    Wiedmann, Thomas

    2009-01-01

    The Ecological Footprint as an indicator that accounts for human demand on global bioproductivity sets out to quantify the impacts associated with consumption in a given country, including the impacts associated with trade. The National Footprint Accounts (NFA) by Global Footprint Network (GFN) calculate trade-embodied Footprints by multiplying yield and embodied energy factors with mass volumes of traded goods in a 'Product Land Use Matrix (PLUM)'. This article compares energy Footprints embodied in trade from and to the United Kingdom in 2002 as calculated by the NFA-PLUM with the results from a recently developed multi-region input-output model (MRIO) for the UK. Although totals for imports and exports are comparable, breaking down the results by economic sectors reveals large differences and hardly any correlation between the two methods. The omission of trade in services (especially transport services) and upstream impacts of energy goods (fossil fuels) and the use of inappropriate embodied energy factors in the NFA-PLUM method are identified as the main reasons for these differences. In the light of the results it seems that a comprehensive Footprint account of trade can better be achieved with an input-output based approach. I conclude that MRIO models - once fully developed - will be particularly suitable in the future to estimate the Ecological Footprints of imports and exports of nations with the possibility to track their origin via inter-industry linkages, international supply chains and multi-national trade flows. (author)

  2. Probing Conformational Changes of Human DNA Polymerase λ Using Mass Spectrometry-Based Protein Footprinting

    Science.gov (United States)

    Fowler, Jason D.; Brown, Jessica A.; Kvaratskhelia, Mamuka; Suo, Zucai

    2009-01-01

    SUMMARY Crystallographic studies of the C-terminal, DNA polymerase β-like domain of human DNA polymerase lambda (fPolλ) suggested that the catalytic cycle might not involve a large protein domain rearrangement as observed with several replicative DNA polymerases and DNA polymerase β. To examine solution-phase protein conformation changes in fPolλ, which also contains a breast cancer susceptibility gene 1 C-terminal domain and a Proline-rich domain at its N-terminus, we used a mass spectrometry - based protein footprinting approach. In parallel experiments, surface accessibility maps for Arg residues were compared for the free fPolλ versus the binary complex of enzyme•gapped DNA and the ternary complex of enzyme•gapped DNA•dNTP. These experiments suggested that fPolλ does not undergo major conformational changes during the catalysis in the solution phase. Furthermore, the mass spectrometry-based protein footprinting experiments revealed that active site residue R386 was shielded from the surface only in the presence of both a gapped DNA substrate and an incoming nucleotide dNTP. Site-directed mutagenesis and pre-steady state kinetic studies confirmed the importance of R386 for the enzyme activity, and indicated the key role for its guanidino group in stabilizing the negative charges of an incoming nucleotide and the leaving pyrophosphate product. We suggest that such interactions could be shared by and important for catalytic functions of other DNA polymerases. PMID:19467241

  3. Rotorwash Operational Footprint Modeling

    Science.gov (United States)

    2014-07-01

    I-13. Francis, J. K., and Gillespie, A., “Relating Gust Speed to Tree Damage in Hurricane Hugo , 1989,” Journal of Arboriculture, November 1993...statement has been Rotorwash Operational Footprint Modeling 72 found to be correct. In many parts of the United States, the requirements for hurricane ...On August 18, 1983, Hurricane Alicia struck downtown Houston, Texas. Researchers were allowed into downtown Houston the following day to help survey

  4. Methods for characterizing magnetic footprints of perpendicular magnetic recording writer heads

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shaoping, E-mail: shaoping.li@wdc.com; Lin, Ed; George, Zach; Terrill, Dave; Mendez, H.; Santucci, J.; Yie, Derek [Western Digital Corp., 44100 Osgood Road, Fremont, California 94539 (United States)

    2014-05-07

    In this work, the magnetic footprints, along with some of its dynamic features in recording process, of perpendicular magnetic recording writer heads have been characterized by using three different techniques. Those techniques are the spin-stand stationary footprint technique, the spin-stand dynamic footprint technique, and the coherent writing technique combined with magnetic force microscope imaging method. The characteristics of those techniques have been compared to one another. It was found experimentally that the spin-stand stationary method could not precisely catch some peculiar recording dynamics of the write heads in certain conditions. The advantages and disadvantages among all those techniques are also examined and discussed in detail.

  5. Methods for characterizing magnetic footprints of perpendicular magnetic recording writer heads

    International Nuclear Information System (INIS)

    Li, Shaoping; Lin, Ed; George, Zach; Terrill, Dave; Mendez, H.; Santucci, J.; Yie, Derek

    2014-01-01

    In this work, the magnetic footprints, along with some of its dynamic features in recording process, of perpendicular magnetic recording writer heads have been characterized by using three different techniques. Those techniques are the spin-stand stationary footprint technique, the spin-stand dynamic footprint technique, and the coherent writing technique combined with magnetic force microscope imaging method. The characteristics of those techniques have been compared to one another. It was found experimentally that the spin-stand stationary method could not precisely catch some peculiar recording dynamics of the write heads in certain conditions. The advantages and disadvantages among all those techniques are also examined and discussed in detail

  6. Methods for characterizing magnetic footprints of perpendicular magnetic recording writer heads

    Science.gov (United States)

    Li, Shaoping; Lin, Ed; George, Zach; Terrill, Dave; Mendez, H.; Santucci, J.; Yie, Derek

    2014-01-01

    In this work, the magnetic footprints, along with some of its dynamic features in recording process, of perpendicular magnetic recording writer heads have been characterized by using three different techniques. Those techniques are the spin-stand stationary footprint technique, the spin-stand dynamic footprint technique, and the coherent writing technique combined with magnetic force microscope imaging method. The characteristics of those techniques have been compared to one another. It was found experimentally that the spin-stand stationary method could not precisely catch some peculiar recording dynamics of the write heads in certain conditions. The advantages and disadvantages among all those techniques are also examined and discussed in detail. PMID:24753633

  7. A method to measure paddle and detector pressures and footprints in mammography

    Energy Technology Data Exchange (ETDEWEB)

    Hogg, Peter; Szczepura, Katy [University of Salford, Salford, Greater Manchester M6 6PU (United Kingdom); Darlington, Alison [Pennine Acute Hospital NHS Trust, Manchester M8 5RB (United Kingdom); Maxwell, Anthony [Royal Bolton Hospital NHS Foundation Trust, Bolton BL4 0JR (United Kingdom)

    2013-04-15

    Purpose: Compression is necessary in mammography to improve image quality and reduce radiation burden. Maximizing the amount of breast in contact with the image receptor (IR) is important. To achieve this, for the craniocaudal projection, there is no consensus within the literature regarding how the IR should be positioned relative to the inframammary fold (IMF). No information exists within the literature to describe how pressure balancing between IR and paddle, and IR breast footprint, might be optimized. This paper describes a novel method for measuring the respective pressures applied to the breast from the IR and the paddle and a method to simultaneously measure the breast footprints on the IR and the paddle. Methods: Using a deformable breast phantom and electronic pressure-sensitive mat, area and pressure readings were gathered from two mammography machines and four paddles at 60, 80, and 100 N with the IR positioned at -2, -1, 0, +1, and +2 cm relative to the IMF (60 combinations in total). Results: Paddle and IR footprints were calculated along with a uniformity index (UI). For all four paddle/machine/pressure combinations the greatest IR footprint was achieved at IMF +2 cm. The UI indicates that the best pressure/footprint balance is achieved at IMF +1 cm. Conclusions: The authors' method appears to be suited to measuring breast footprints and pressures on IR and paddle and a human female study is planned.

  8. A method to measure paddle and detector pressures and footprints in mammography

    International Nuclear Information System (INIS)

    Hogg, Peter; Szczepura, Katy; Darlington, Alison; Maxwell, Anthony

    2013-01-01

    Purpose: Compression is necessary in mammography to improve image quality and reduce radiation burden. Maximizing the amount of breast in contact with the image receptor (IR) is important. To achieve this, for the craniocaudal projection, there is no consensus within the literature regarding how the IR should be positioned relative to the inframammary fold (IMF). No information exists within the literature to describe how pressure balancing between IR and paddle, and IR breast footprint, might be optimized. This paper describes a novel method for measuring the respective pressures applied to the breast from the IR and the paddle and a method to simultaneously measure the breast footprints on the IR and the paddle. Methods: Using a deformable breast phantom and electronic pressure-sensitive mat, area and pressure readings were gathered from two mammography machines and four paddles at 60, 80, and 100 N with the IR positioned at −2, −1, 0, +1, and +2 cm relative to the IMF (60 combinations in total). Results: Paddle and IR footprints were calculated along with a uniformity index (UI). For all four paddle/machine/pressure combinations the greatest IR footprint was achieved at IMF +2 cm. The UI indicates that the best pressure/footprint balance is achieved at IMF +1 cm. Conclusions: The authors’ method appears to be suited to measuring breast footprints and pressures on IR and paddle and a human female study is planned.

  9. Carbon footprint as an environmental sustainability indicator for the particleboard produced in Pakistan.

    Science.gov (United States)

    Hussain, Majid; Naseem Malik, Riffat; Taylor, Adam

    2017-05-01

    This study quantified the carbon footprint of particleboard production in Pakistan using a cradle-to-gate life cycle assessment approach. The system boundary comprised raw materials acquisition, transport, particleboard manufacture and finished product distribution. Primary data were collected through surveys and meetings with particleboard manufacturers. Secondary data were taken from the literature. Greenhouse gas emissions from off-site industrial operations of the particleboard industry represented 52% of the total emissions from the production of 1.0m 3 of particleboard in Pakistan. The on-site industrial operations cause direct greenhouse gas emissions and accounted for 48% of the total emissions. These operations included energy consumption in stationary sources, the company-owned vehicle fleet, and the distribution and marketing of the finished product. The use of natural gas combustion in the stationary and mobile sources, raw material transport and urea-formaldehyde resin production chain accounted for the highest emissions from the particleboard production chain in Pakistan. The identification of the major hotspots in the particleboard production chain can assist the wood panel industry to improve their environmental profile. More efforts are needed to investigate the urea-formaldehyde resin production chain and substitution of roundwood with wood and agri-residues to assess the potential improvements. In addition, renewable energy sources should be encouraged to avoid greenhouse gas emissions by substituting fossil energy. This study also provides a benchmark for future research work to formulate comprehensive greenhouse gas emissions reduction plans, because no previous research work is available on the carbon footprint of particleboard production in Pakistan. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Carbon footprint hotspots of prefabricated sandwich panels for hostel construction in Perlis

    Science.gov (United States)

    Razali, Norashikin; Ayob, Afizah; Chandra, Muhammad Erwan Shah; Zaki, Mohd Faiz Mohammad; Ahmad, Abdul Ghapar

    2017-10-01

    Sustainable design and construction have gained increasing research interest, and reduction of carbon from building construction has become the main focus of environmental strategies in Malaysia. This study uses life cycle assessment and life cycle inventory analysis frameworks to estimate the amount of carbon footprint expressed in carbon dioxide equivalent tons (CO2e) produced by manufacturing prefabricated Industrialized Building System sandwich panels and its installation for a five-story hostel in Perlis, Malaysia. Results show that the carbon footprint hotspots were centered on boiler machine operation and cement with 4.52 and 369.04 tons CO2e, respectively. This finding is due to the extensive energy used for steam heating and high engine rating for the boiler. However, for cement, the carbon footprint hotspots are caused by the large quantity of cement applied in shotcrete mixture and its high extraction and production CO2 emission values. The overall onsite materials generated 96.36% of the total carbon footprint. These carbon footprint hotspot results constitute a necessary base for the Malaysian government in accomplishing an adequate dimensioning of carbon emissions in the building sector.

  11. Quantifying environmental performance using an environmental footprint calculator

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.B.; Loney, A.C.; Chan, V. [Conestoga-Rovers & Associates, Waterloo, Ontario (Canada)

    2009-07-01

    This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

  12. Quantifying environmental performance using an environmental footprint calculator

    International Nuclear Information System (INIS)

    Smith, D.B.; Loney, A.C.; Chan, V.

    2009-01-01

    This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

  13. Prehistory: A Teacher's Guide. Education on Site.

    Science.gov (United States)

    Corbishley, Mike; Darvill, Tim; Stone, Peter

    Chronologically prehistory accounts for over 99% of the human past. During this time, the earliest human ancestors spread across the world from Africa and changed, modified, and evolved until the species "Homo sapiens sapiens" made its appearance some 200,000 years ago. This teacher's guide provides an outline of the prehistory of the…

  14. Inter- and intra-examiner reliability of footprint pattern analysis obtained from diabetics using the Harris mat.

    Science.gov (United States)

    Cisneros, Lígia de Loiola; Fonseca, Tiago H S; Abreu, Vivianni C

    2010-01-01

    High plantar pressure is a proven risk factor for ulceration among individuals with diabetes mellitus. The Harris and Beath footprinting mat is one of the tools used in screening for foot ulceration risk among these subjects. There are no reports in the literature on the reliability of footprint analysis using print pattern criteria. The aim of this study was to evaluate the inter- and intra-examiner reliability of the analysis of footprint patterns obtained using the Harris and Beath footprinting mat. Footprints were taken from 41 subjects using the footprinting mat. The images were subjected to analysis by three independent examiners. To investigate the intra-examiner reliability, the analysis was repeated by one of the examiners one week later. The weighted kappa coefficient was excellent (K(w) > 0.80) for the inter- and intra-examiner analyses for most of the points studied on both feet. The criteria for analyzing footprint patterns obtained using the Harris and Beath footprinting mat presented good reliability and high to excellent inter- and intra-examiner agreement. This method is reliable for analyses involving one or more examiners. Article registered in the Australian New Zealand Clinical Trials Registry (ANZCTR) under the number ACTRN12609000693224.

  15. Orsang Man: a robust Homo sapiens in Central India with Asian Homo erectus features

    OpenAIRE

    Dambricourt-Malassé, Anne; Raj, Rachna; Shah, Samit

    2013-01-01

    17th World Congress of the International Union of Anthropological and Ethnological Sciences "Evolving Humanity, Emerging Worlds", Manchester, August 5th-10th, 2013 Accepted preprint; A Homo sapiens calvarium recovered in a fluvial deposit of the Orsang River give evidence of genetic continuity between late Asian Homo erectus suggesting an Asian "like-cromagnoid" stadium in the evolutionary process. IRSL dating of the host sediments provided an age ranging from 50 to 30 ka. The interesting fea...

  16. A carbon footprint simulation model for the cork oak sector.

    Science.gov (United States)

    Demertzi, Martha; Paulo, Joana Amaral; Arroja, Luís; Dias, Ana Cláudia

    2016-10-01

    In the present study, a simulation model for the calculation of the carbon footprint of the cork oak sector (CCFM) is developed for the first time. A life cycle approach is adopted including the forest management, manufacturing, use and end-of-life stages. CCFM allows the user to insert the cork type used as raw material and its respective quantity and the distances in-between the various stages. The user can choose among different end-of-life destination options for the used cork products. The option of inserting different inputs, allows the use of the present simulation model for different cork oak systems, in different countries and with different conditions. CCFM allows the identification of the stages and products with the greatest carbon footprint and thus, a better management of the sector from an environmental perspective. The Portuguese cork oak sector is used as an application example of the model. The results obtained showed that the agglomeration industry is the hotspot for the carbon footprint of the cork sector mainly due to the production of the resins that are mixed with the cork granules for the production of agglomerated cork products. The consideration of the biogenic carbon emissions and sequestration of carbon at the forest in the carbon footprint, resulted to a great decrease of the sector's carbon footprint. Future actions for improvement are suggested in order to decrease the carbon footprint of the entire cork sector. It was found that by decreasing by 10% the emission factor of the agglomeration and transformation industries, substituting the transport trucks by more recent ones and by decreasing by 10% the cork products reaching the landfilling end-of-life destinations (while increasing the quantities reaching incineration and recycling), a decrease of the total CF (excluding the biogenic emissions and sequestration) of the entire cork industry by 10% can be achieved. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Assessing the Blue and Green Water Footprint of Lucerne for Milk Production in South Africa

    OpenAIRE

    Morne E. Scheepers; Henry Jordaan

    2016-01-01

    The Global Water Footprint Standard approach was used to calculate the volumetric blue and green water footprint indicator for lucerne production as important feed for dairy cows in a major lucerne production region in South Africa. The degree of sustainability of water use then was assessed by comparing water use to water availability for the region. The results show a volumetric water footprint indicator of 378 m3/tonne of lucerne. Of the total blue and green water footprint, 55% is green w...

  18. Comparison of small-footprint discrete return and full waveform airborne lidar data for estimating multiple forest variables

    OpenAIRE

    Sumnall, Matthew J.; Hill, Ross A.; Hinsley, Shelley A.

    2016-01-01

    The quantification of forest ecosystems is important for a variety of purposes, including the assessment of wildlife habitat, nutrient cycles, timber yield and fire propagation. This research assesses the estimation of forest structure, composition and deadwood variables from small-footprint airborne lidar data, both discrete return (DR) and full waveform (FW), acquired under leaf-on and leaf-off conditions. The field site, in the New Forest, UK, includes managed plantation and ancient, se...

  19. Variability of tsunami inundation footprints considering stochastic scenarios based on a single rupture model: Application to the 2011 Tohoku earthquake

    KAUST Repository

    Goda, Katsuichiro

    2015-06-30

    The sensitivity and variability of spatial tsunami inundation footprints in coastal cities and towns due to a megathrust subduction earthquake in the Tohoku region of Japan are investigated by considering different fault geometry and slip distributions. Stochastic tsunami scenarios are generated based on the spectral analysis and synthesis method with regards to an inverted source model. To assess spatial inundation processes accurately, tsunami modeling is conducted using bathymetry and elevation data with 50 m grid resolutions. Using the developed methodology for assessing variability of tsunami hazard estimates, stochastic inundation depth maps can be generated for local coastal communities. These maps are important for improving disaster preparedness by understanding the consequences of different situations/conditions, and by communicating uncertainty associated with hazard predictions. The analysis indicates that the sensitivity of inundation areas to the geometrical parameters (i.e., top-edge depth, strike, and dip) depends on the tsunami source characteristics and the site location, and is therefore complex and highly nonlinear. The variability assessment of inundation footprints indicates significant influence of slip distributions. In particular, topographical features of the region, such as ria coast and near-shore plain, have major influence on the tsunami inundation footprints.

  20. A Fast Track approach to deal with the temporal dimension of crop water footprint

    Science.gov (United States)

    Tuninetti, Marta; Tamea, Stefania; Laio, Francesco; Ridolfi, Luca

    2017-07-01

    Population growth, socio-economic development and climate changes are placing increasing pressure on water resources. Crop water footprint is a key indicator in the quantification of such pressure. It is determined by crop evapotranspiration and crop yield, which can be highly variable in space and time. While the spatial variability of crop water footprint has been the objective of several investigations, the temporal variability remains poorly studied. In particular, some studies approached this issue by associating the time variability of crop water footprint only to yield changes, while considering evapotranspiration patterns as marginal. Validation of this Fast Track approach has yet to be provided. In this Letter we demonstrate its feasibility through a comprehensive validation, an assessment of its uncertainty, and an example of application. Our results show that the water footprint changes are mainly driven by yield trends, while evapotranspiration plays a minor role. The error due to considering constant evapotranspiration is three times smaller than the uncertainty of the model used to compute the crop water footprint. These results confirm the suitability of the Fast Track approach and enable a simple, yet appropriate, evaluation of time-varying crop water footprint.

  1. Genomic footprinting in mammalian cells with ultraviolet light

    International Nuclear Information System (INIS)

    Becker, M.M.; Wang, Z.; Grossmann, G.; Becherer, K.A.

    1989-01-01

    A simple and accurate genomic primer extension method has been developed to detect ultraviolet footprinting patterns of regulatory protein-DNA interactions in mammalian genomic DNA. The technique can also detect footprinting or sequencing patterns introduced into genomic DNA by other methods. Purified genomic DNA, containing either damaged bases or strand breaks introduced by footprinting or sequencing reactions, is first cut with a convenient restriction enzyme to reduce its molecular weight. A highly radioactive single-stranded DNA primer that is complementary to a region of genomic DNA whose sequence or footprint one wishes to examine is then mixed with 50 micrograms of restriction enzyme-cut genomic DNA. The primer is approximately 100 bases long and contains 85 radioactive phosphates, each of specific activity 3000 Ci/mmol (1 Ci = 37 GBq). A simple and fast method for preparing such primers is described. Following brief heat denaturation at 100 degrees C, the solution of genomic DNA and primer is cooled to 74 degrees C and a second solution containing Taq polymerase (Thermus aquaticus DNA polymerase) and the four deoxynucleotide triphosphates is added to initiate primer extension of genomic DNA. Taq polymerase extends genomic hybridized primer until its polymerization reaction is terminated either by a damaged base or strand break in genomic DNA or by the addition of dideoxynucleotide triphosphates in the polymerization reaction. The concurrent primer hybridization-extension reaction is terminated after 5 hr and unhybridized primer is digested away by mung bean nuclease. Primer-extended genomic DNA is then denatured and electrophoresed on a polyacrylamide sequencing gel, and radioactive primer extension products are revealed by autoradiography

  2. Auditory ossicles from southwest Asian Mousterian sites.

    Science.gov (United States)

    Quam, Rolf; Rak, Yoel

    2008-03-01

    The present study describes and analyzes new Neandertal and early modern human auditory ossicles from the sites of Qafzeh and Amud in southwest Asia. Some methodological issues in the measurement of these bones are considered, and a set of standardized measurement protocols is proposed. Evidence of erosive pathological processes, most likely attributed to otitis media, is present on the ossicles of Qafzeh 12 and Amud 7 but none can be detected in the other Qafzeh specimens. Qafzeh 12 and 15 extend the known range of variation in the fossil H. sapiens sample in some metric variables, but morphologically, the new specimens do not differ in any meaningful way from living humans. In most metric dimensions, the Amud 7 incus falls within our modern human range of variation, but the more closed angle between the short and long processes stands out. Morphologically, all the Neandertal incudi described to date show a very straight long process. Several tentative hypotheses can be suggested regarding the evolution of the ear ossicles in the genus Homo. First, the degree of metric and morphological variation seems greater among the fossil H. sapiens sample than in Neandertals. Second, there is a real difference in the size of the malleus between Neandertals and fossil H. sapiens, with Neandertals showing larger values in most dimensions. Third, the wider malleus head implies a larger articular facet in the Neandertals, and this also appears to be reflected in the larger (taller) incus articular facet. Fourth, there is limited evidence for a potential temporal trend toward reduction of the long process within the Neandertal lineage. Fifth, a combination of features in the malleus, incus, and stapes may indicate a slightly different relative positioning of either the tip of the incus long process or stapes footplate within the tympanic cavity in the Neandertal lineage.

  3. Corporate Carbon Footprint Arla Foods amba

    DEFF Research Database (Denmark)

    Birkved, Morten; Poulsen, Jan; Shonfield, Peter

    2009-01-01

    to affect consumers’ purchasing decisions Recognising the potentially important impact of climate change on its business, as well as its wider social responsibility to effectively manage its GHG emissions, Arla Foods has commissioned PE North West Europe to carry out a corporate carbon footprint analysis...

  4. Study of Biometric Identification Method Based on Naked Footprint

    Directory of Open Access Journals (Sweden)

    Raji Rafiu King

    2013-10-01

    Full Text Available The scale of deployment of biometric identity-verification systems has recently seen an enormous increase owing to the need for more secure and reliable way of identifying people. Footprint identification which can be defined as the measurement of footprint features for recognizing the identity of a user has surfaced recently. This study is based on a biometric personal identification method using static footprint features viz. friction ridge / texture and foot shape / silhouette. To begin with, naked footprints of users are captured; images then undergo pre processing followed by the extraction of two features; shape using Gradient Vector Flow (GVF) snake model and minutiae extraction respectively. Matching is then effected based on these two features followed by a fusion of these two results for either a reject or accept decision. Our shape matching feature is based on cosine similarity while the texture one is based on miniature score matching. The results from our research establish that the naked footprint is a credible biometric feature as two barefoot impressions of an individual match perfectly while that of two different persons shows a great deal of dissimilarity. Normal 0 false false false IN X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Doi: 10.12777/ijse.5.2.29-35 How to cite this article: King

  5. Carbon footprint of urban source separation for nutrient recovery.

    Science.gov (United States)

    Kjerstadius, H; Bernstad Saraiva, A; Spångberg, J; Davidsson, Å

    2017-07-15

    Source separation systems for the management of domestic wastewater and food waste has been suggested as more sustainable sanitation systems for urban areas. The present study used an attributional life cycle assessment to investigate the carbon footprint and potential for nutrient recovery of two sanitation systems for a hypothetical urban area in Southern Sweden. The systems represented a typical Swedish conventional system and a possible source separation system with increased nutrient recovery. The assessment included the management chain from household collection, transport, treatment and final return of nutrients to agriculture or disposal of the residuals. The results for carbon footprint and nutrient recovery (phosphorus and nitrogen) concluded that the source separation system could increase nutrient recovery (0.30-0.38 kg P capita -1 year -1 and 3.10-3.28 kg N capita -1 year -1 ), while decreasing the carbon footprint (-24 to -58 kg CO 2 -eq. capita -1 year -1 ), compared to the conventional system. The nutrient recovery was increased by the use of struvite precipitation and ammonium stripping at the wastewater treatment plant. The carbon footprint decreased, mainly due to the increased biogas production, increased replacement of mineral fertilizer in agriculture and less emissions of nitrous oxide from wastewater treatment. In conclusion, the study showed that source separation systems could potentially be used to increase nutrient recovery from urban areas, while decreasing the climate impact. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Water footprints of nations: water use by people as a function of their consumption pattern

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert; Chapagain, Ashok

    2007-01-01

    The water footprint shows the extent of water use in relation to consumption of people. The water footprint of a country is defined as the volume of water needed for the production of the goods and services consumed by the inhabitants of the country. The internal water footprint is the volume of

  7. Pygmoid Australomelanesian Homo sapiens skeletal remains from Liang Bua, Flores: Population affinities and pathological abnormalities

    OpenAIRE

    Jacob, T.; Indriati, E.; Soejono, R. P.; Hsü, K.; Frayer, D. W.; Eckhardt, R. B.; Kuperavage, A. J.; Thorne, A.; Henneberg, M.

    2006-01-01

    Liang Bua 1 (LB1) exhibits marked craniofacial and postcranial asymmetries and other indicators of abnormal growth and development. Anomalies aside, 140 cranial features place LB1 within modern human ranges of variation, resembling Australomelanesian populations. Mandibular and dental features of LB1 and LB6/1 either show no substantial deviation from modern Homo sapiens or share features (receding chins and rotated premolars) with Rampasasa pygmies now living near Liang Bua Cave. We propose ...

  8. Carbon Footprint Calculator | Climate Change | US EPA

    Science.gov (United States)

    2016-12-12

    An interactive calculator to estimate your household's carbon footprint. This tool will estimate carbon pollution emissions from your daily activities and show how to reduce your emissions and save money through simple steps.

  9. Integration of water footprint accounting and costs for optimal pulp supply mix in paper industry

    DEFF Research Database (Denmark)

    Manzardo, Alessandro; Ren, Jingzheng; Piantella, Antonio

    2014-01-01

    studies have focused on these aspects, but there have been no previous reports on the integrated application of raw material water footprint accounting and costs in the definition of the optimal supply mix of chemical pulps from different countries. The current models that have been applied specifically...... that minimizes the water footprint accounting results and costs of chemical pulp, thereby facilitating the assessment of the water footprint by accounting for different chemical pulps purchased from various suppliers, with a focus on the efficiency of the production process. Water footprint accounting...... was adapted to better represent the efficiency of pulp and paper production. A multi-objective model for supply mix optimization was also developed using multi-criteria decision analysis (MCDA). Water footprint accounting confirmed the importance of the production efficiency of chemical pulp, which affected...

  10. Green Remediation Best Management Practices: Integrating Renewable Energy into Site Cleanup

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

  11. Supercollider: Footprint approved

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    With the 'footprint' - the precise location of the 87-kilometre US Superconducting Supercollider, SSC, and its ancillary buildings - now approved, teams of specialists commissioned by the State of Texas swing into action to procure the 17,000 acres (69 million square metres) of land covered by the project. With the SSC Laboratory in Ellis County and the US Department of Energy (DoE, the overseeing government agency) both hiring manpower for this project to collide 20 TeV (20,000 GeV) proton beams before the end of the century, the host State of Texas is providing a helping hand

  12. The carbon footprint of Australian health care.

    Science.gov (United States)

    Malik, Arunima; Lenzen, Manfred; McAlister, Scott; McGain, Forbes

    2018-01-01

    Carbon footprints stemming from health care have been found to be variable, from 3% of the total national CO 2 equivalent (CO 2 e) emissions in England to 10% of the national CO 2 e emissions in the USA. We aimed to measure the carbon footprint of Australia's health-care system. We did an observational economic input-output lifecycle assessment of Australia's health-care system. All expenditure data were obtained from the 15 sectors of the Australian Institute of Health and Welfare for the financial year 2014-15. The Australian Industrial Ecology Virtual Laboratory (IELab) data were used to obtain CO 2 e emissions per AUS$ spent on health care. In 2014-15 Australia spent $161·6 billion on health care that led to CO 2 e emissions of about 35 772 (68% CI 25 398-46 146) kilotonnes. Australia's total CO 2 e emissions in 2014-15 were 494 930 kilotonnes, thus health care represented 35 772 (7%) of 494 930 kilotonnes total CO 2 e emissions in Australia. The five most important sectors within health care in decreasing order of total CO 2 e emissions were: public hospitals (12 295 [34%] of 35 772 kilotonnes CO 2 e), private hospitals (3635 kilotonnes [10%]), other medications (3347 kilotonnes [9%]), benefit-paid drugs (3257 kilotonnes [9%]), and capital expenditure for buildings (2776 kilotonnes [8%]). The carbon footprint attributed to health care was 7% of Australia's total; with hospitals and pharmaceuticals the major contributors. We quantified Australian carbon footprint attributed to health care and identified health-care sectors that could be ameliorated. Our results suggest the need for carbon-efficient procedures, including greater public health measures, to lower the impact of health-care services on the environment. None. Copyright © 2018 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license. Published by Elsevier Ltd.. All rights reserved.

  13. Percutaneous closure of paravalvular leaks after transcatheter aortic valve implantation with Edwards SAPIEN prosthesis: a report of two cases.

    Science.gov (United States)

    Estévez-Loureiro, Rodrigo; Salgado-Fernández, Jorge; Vázquez-González, Nicolás

    2013-02-01

    Significant periprosthetic aortic regurgitation after transcatheter aortic valve implantation with Edwards SAPIEN prosthesis has become a major concern of this technique given its association with impaired survival. We report the successful closure of such defects using vascular occlusion devices with significant improvement in clinical status of patients.

  14. Tracking urban carbon footprints from production and consumption perspectives

    International Nuclear Information System (INIS)

    Lin, Jianyi; Hu, Yuanchao; Cui, Shenghui; Kang, Jiefeng; Ramaswami, Anu

    2015-01-01

    Cities are hotspots of socio-economic activities and greenhouse gas emissions. The aim of this study was to extend the research range of the urban carbon footprint (CF) to cover emissions embodied in products traded among regions and intra-city sectors. Using Xiamen City as a study case, the total urban-related emissions were evaluated, and the carbon flows among regions and intra-city sectors were tracked. Then five urban CF accountings were evaluated, including purely geographic accounting (PGA), community-wide infrastructure footprint (CIF), and consumption-based footprint (CBF) methods, as well as the newly defined production-based footprint (PBF) and purely production footprint (PPF). Research results show that the total urban-related emissions of Xiamen City in 2010 were 55.2 Mt CO 2 e/y, of which total carbon flow among regions or intra-city sectors accounted for 53.7 Mt CO 2 e/y. Within the total carbon flow, import and export respectively accounted for 59 and 65%, highlighting the importance of emissions embodied in trade. By regional trade balance, North America and Europe were the largest net carbon exported-to regions, and Mainland China and Taiwan the largest net carbon imported-from regions. Among intra-sector carbon flows, manufacturing was the largest emission-consuming sector of the total urban carbon flow, accounting for 77.4, and 98% of carbon export was through industrial products trade. By the PBF, PPF, CIF, PGA and CBF methods, the urban CFs were respectively 53.7 Mt CO 2 e/y, 44.8 Mt CO 2 e/y, 28.4 Mt CO 2 e/y, 23.7 Mt CO 2 e/y, and 19.0 Mt CO 2 e/y, so all of the other four CFs were higher than the CBF. All of these results indicate that urban carbon mitigation must consider the supply chain management of imported goods, the production efficiency within the city, the consumption patterns of urban consumers, and the responsibility of the ultimate consumers outside the city. (letter)

  15. Tracking urban carbon footprints from production and consumption perspectives

    Science.gov (United States)

    Lin, Jianyi; Hu, Yuanchao; Cui, Shenghui; Kang, Jiefeng; Ramaswami, Anu

    2015-05-01

    Cities are hotspots of socio-economic activities and greenhouse gas emissions. The aim of this study was to extend the research range of the urban carbon footprint (CF) to cover emissions embodied in products traded among regions and intra-city sectors. Using Xiamen City as a study case, the total urban-related emissions were evaluated, and the carbon flows among regions and intra-city sectors were tracked. Then five urban CF accountings were evaluated, including purely geographic accounting (PGA), community-wide infrastructure footprint (CIF), and consumption-based footprint (CBF) methods, as well as the newly defined production-based footprint (PBF) and purely production footprint (PPF). Research results show that the total urban-related emissions of Xiamen City in 2010 were 55.2 Mt CO2e/y, of which total carbon flow among regions or intra-city sectors accounted for 53.7 Mt CO2e/y. Within the total carbon flow, import and export respectively accounted for 59 and 65%, highlighting the importance of emissions embodied in trade. By regional trade balance, North America and Europe were the largest net carbon exported-to regions, and Mainland China and Taiwan the largest net carbon imported-from regions. Among intra-sector carbon flows, manufacturing was the largest emission-consuming sector of the total urban carbon flow, accounting for 77.4, and 98% of carbon export was through industrial products trade. By the PBF, PPF, CIF, PGA and CBF methods, the urban CFs were respectively 53.7 Mt CO2e/y, 44.8 Mt CO2e/y, 28.4 Mt CO2e/y, 23.7 Mt CO2e/y, and 19.0 Mt CO2e/y, so all of the other four CFs were higher than the CBF. All of these results indicate that urban carbon mitigation must consider the supply chain management of imported goods, the production efficiency within the city, the consumption patterns of urban consumers, and the responsibility of the ultimate consumers outside the city.

  16. The Added Value of Water Footprint Assessment for National Water Policy: A Case Study for Morocco

    NARCIS (Netherlands)

    Schyns, Joseph Franciscus; Hoekstra, Arjen Ysbert

    2014-01-01

    A Water Footprint Assessment is carried out for Morocco, mapping the water footprint of different activities at river basin and monthly scale, distinguishing between surface- and groundwater. The paper aims to demonstrate the added value of detailed analysis of the human water footprint within a

  17. Estimation of the carbon footprint of the Galician fishing activity (NW Spain)

    International Nuclear Information System (INIS)

    Iribarren, Diego; Vazquez-Rowe, Ian; Hospido, Almudena; Moreira, Maria Teresa; Feijoo, Gumersindo

    2010-01-01

    The food production system as a whole is recognized as one of the major contributors to environmental impacts. Accordingly, food production, processing, transport and consumption account for a relevant portion of the greenhouse gas (GHG) emissions associated with any country. In this context, there is an increasing market demand for climate-relevant information regarding the global warming impact of consumer food products throughout the supply chains. This article deals with the assessment of the carbon footprint of seafood products as a key subgroup in the food sector. Galicia (NW Spain) was selected as a case study. The analysis is based on a representative set of species within the Galician fishing sector, including species obtained from coastal fishing (e.g. horse mackerel, Atlantic mackerel, European pilchard and blue whiting), offshore fishing (e.g. European hake, megrim and anglerfish), deep-sea fishing (skipjack and yellowfin tuna), extensive aquaculture (mussels) and intensive aquaculture (turbot). The carbon footprints associated with the production-related activities of each selected species were quantified following a business-to-business approach on the basis of 1 year of fishing activity. These individual carbon footprints were used to calculate the carbon footprint for each of the different Galician fisheries and culture activities. Finally, the lump sum of the carbon footprints for coastal, offshore and deep-sea fishing and extensive and intensive aquaculture brought about the carbon footprint of the Galician fishing activity (i.e., capture and culture). A benchmark for quantifying and communicating emission reductions was then provided, and opportunities to reduce the GHG emissions associated with the Galician fishing activity could be prioritized.

  18. Estimation of the carbon footprint of the Galician fishing activity (NW Spain).

    Science.gov (United States)

    Iribarren, Diego; Vázquez-Rowe, Ian; Hospido, Almudena; Moreira, María Teresa; Feijoo, Gumersindo

    2010-10-15

    The food production system as a whole is recognized as one of the major contributors to environmental impacts. Accordingly, food production, processing, transport and consumption account for a relevant portion of the greenhouse gas (GHG) emissions associated with any country. In this context, there is an increasing market demand for climate-relevant information regarding the global warming impact of consumer food products throughout the supply chains. This article deals with the assessment of the carbon footprint of seafood products as a key subgroup in the food sector. Galicia (NW Spain) was selected as a case study. The analysis is based on a representative set of species within the Galician fishing sector, including species obtained from coastal fishing (e.g. horse mackerel, Atlantic mackerel, European pilchard and blue whiting), offshore fishing (e.g. European hake, megrim and anglerfish), deep-sea fishing (skipjack and yellowfin tuna), extensive aquaculture (mussels) and intensive aquaculture (turbot). The carbon footprints associated with the production-related activities of each selected species were quantified following a business-to-business approach on the basis of 1year of fishing activity. These individual carbon footprints were used to calculate the carbon footprint for each of the different Galician fisheries and culture activities. Finally, the lump sum of the carbon footprints for coastal, offshore and deep-sea fishing and extensive and intensive aquaculture brought about the carbon footprint of the Galician fishing activity (i.e., capture and culture). A benchmark for quantifying and communicating emission reductions was then provided, and opportunities to reduce the GHG emissions associated with the Galician fishing activity could be prioritized. Copyright © 2010 Elsevier B.V. All rights reserved.

  19. High resolution production water footprints of the United States

    Science.gov (United States)

    Marston, L.; Yufei, A.; Konar, M.; Mekonnen, M.; Hoekstra, A. Y.

    2017-12-01

    The United States is the largest producer and consumer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to this economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, high-resolution database of water use by sector would provide insight into US utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the US. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the US economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking.

  20. The X-ray footprint of the circumnuclear disc

    Science.gov (United States)

    Mossoux, Enmanuelle; Eckart, Andreas

    2018-03-01

    We studied the central regions of the Galactic Centre to determine if the circumnuclear disc (CND) acts as an absorber or a barrier for the central X-rays diffuse emission. After reprocessing 4.6 Ms of Chandra observations, we were able to detect, for the first time, a depression in the X-ray luminosity of the diffuse emission whose size and location correspond to those of the CND. We extracted the X-ray spectra for various regions inside the CND footprint as well as for the region where the footprint is observed and for a region located outside the footprint. We simultaneously fitted these spectra as an optically thin plasma whose absorption by the interstellar medium (ISM) and by the local plasma were fitted independently using the Markov chain Monte Carlo method. The hydrogen column density of the ISM is 7.5 × 1022 cm-2. The X-ray diffuse emission inside the CND footprint is formed by a 2T plasma of 1 and 4 keV with slightly super-solar abundances except for the iron and carbon that are sub-solar. The plasma from the CND, in turn, is better described by a 1T model with abundances and local hydrogen column density that are very different from those of the innermost regions. The large iron abundance in this region confirms that the CND is dominated by the shock-heated ejecta of the Sgr A East supernova remnant. We deduced that the CND rather acts as a barrier for the Galactic Centre plasma and that the plasma located outside the CND may correspond to the collimated outflow possibly created by Sgr A* or the interaction between the wind of massive stars and the mini-spiral material.

  1. Footprints: A Visual Search Tool that Supports Discovery and Coverage Tracking.

    Science.gov (United States)

    Isaacs, Ellen; Domico, Kelly; Ahern, Shane; Bart, Eugene; Singhal, Mudita

    2014-12-01

    Searching a large document collection to learn about a broad subject involves the iterative process of figuring out what to ask, filtering the results, identifying useful documents, and deciding when one has covered enough material to stop searching. We are calling this activity "discoverage," discovery of relevant material and tracking coverage of that material. We built a visual analytic tool called Footprints that uses multiple coordinated visualizations to help users navigate through the discoverage process. To support discovery, Footprints displays topics extracted from documents that provide an overview of the search space and are used to construct searches visuospatially. Footprints allows users to triage their search results by assigning a status to each document (To Read, Read, Useful), and those status markings are shown on interactive histograms depicting the user's coverage through the documents across dates, sources, and topics. Coverage histograms help users notice biases in their search and fill any gaps in their analytic process. To create Footprints, we used a highly iterative, user-centered approach in which we conducted many evaluations during both the design and implementation stages and continually modified the design in response to feedback.

  2. Carbon footprint associated with four disposal scenarios for urban pruning waste.

    Science.gov (United States)

    Araújo, Yuri Rommel Vieira; de Góis, Monijany Lins; Junior, Luiz Moreira Coelho; Carvalho, Monica

    2018-01-01

    The inadequate disposal of urban pruning residues can cause significant environmental impacts. The objective of the study presented herein was to quantify the carbon footprint and analyze four disposal scenarios for the urban pruning waste of the city of Joao Pessoa (Northeast Brazil). Software SimaPro was utilized for the quantification of the carbon footprint, with the IPCC 2013 GWP 100y impact evaluation method. The end-of-life treatments considered were sanitary landfilling (with and without collection of methane), simple municipal incineration, and reutilization of wood (transformation into briquettes). The results indicated that simple disposal in sanitary landfill generated 136.34 kg CO 2 /t urban pruning waste collected (highest carbon footprint), sanitary landfill with methane collection emitted 113.43 kg CO 2 /t waste, municipal incineration generated 71.31 kg CO 2 /t waste, and reutilization of woody residues was the scenario with the lowest carbon footprint, with 27.82 kg CO 2 /t waste. This study demonstrated that reutilization of biomass, besides being environmentally viable, presents the potential to contribute to the city's environmental quality, including the possibility of being used to obtain carbon credits.

  3. The Human Footprint in Mexico: Physical Geography and Historical Legacies

    Science.gov (United States)

    Ortega-Rubio, Alfredo; Kolb, Melanie; Bezaury Creel, Juan E.

    2015-01-01

    Using publicly available data on land use and transportation corridors we calculated the human footprint index for the whole of Mexico to identify large-scale spatial patterns in the anthropogenic transformation of the land surface. We developed a map of the human footprint for the whole country and identified the ecological regions that have most transformed by human action. Additionally, we analyzed the extent to which (a) physical geography, expressed spatially in the form of biomes and ecoregions, compared to (b) historical geography, expressed as the spatial distribution of past human settlements, have driven the patterns of human modification of the land. Overall Mexico still has 56% of its land surface with low impact from human activities, but these areas are not evenly distributed. The lowest values are on the arid north and northwest, and the tropical southeast, while the highest values run along the coast of the Gulf of Mexico and from there inland along an east-to-west corridor that follows the Mexican transversal volcanic ranges and the associated upland plateau. The distribution of low- and high footprint areas within ecoregions forms a complex mosaic: the generally well-conserved Mexican deserts have some highly transformed agro-industrial areas, while many well-conserved, low footprint areas still persist in the highly-transformed ecoregions of central Mexico. We conclude that the spatial spread of the human footprint in Mexico is both the result of the limitations imposed by physical geography to human development at the biome level, and, within different biomes, of a complex history of past civilizations and technologies, including the 20th Century demographic explosion but also the spatial pattern of ancient settlements that were occupied by the Spanish Colony. PMID:25803839

  4. The human footprint in Mexico: physical geography and historical legacies.

    Science.gov (United States)

    González-Abraham, Charlotte; Ezcurra, Exequiel; Garcillán, Pedro P; Ortega-Rubio, Alfredo; Kolb, Melanie; Bezaury Creel, Juan E

    2015-01-01

    Using publicly available data on land use and transportation corridors we calculated the human footprint index for the whole of Mexico to identify large-scale spatial patterns in the anthropogenic transformation of the land surface. We developed a map of the human footprint for the whole country and identified the ecological regions that have most transformed by human action. Additionally, we analyzed the extent to which (a) physical geography, expressed spatially in the form of biomes and ecoregions, compared to (b) historical geography, expressed as the spatial distribution of past human settlements, have driven the patterns of human modification of the land. Overall Mexico still has 56% of its land surface with low impact from human activities, but these areas are not evenly distributed. The lowest values are on the arid north and northwest, and the tropical southeast, while the highest values run along the coast of the Gulf of Mexico and from there inland along an east-to-west corridor that follows the Mexican transversal volcanic ranges and the associated upland plateau. The distribution of low- and high footprint areas within ecoregions forms a complex mosaic: the generally well-conserved Mexican deserts have some highly transformed agro-industrial areas, while many well-conserved, low footprint areas still persist in the highly-transformed ecoregions of central Mexico. We conclude that the spatial spread of the human footprint in Mexico is both the result of the limitations imposed by physical geography to human development at the biome level, and, within different biomes, of a complex history of past civilizations and technologies, including the 20th Century demographic explosion but also the spatial pattern of ancient settlements that were occupied by the Spanish Colony.

  5. The mitogenome of a 35,000-year-old Homo sapiens from Europe supports a Palaeolithic back-migration to Africa

    NARCIS (Netherlands)

    Hervella, M.; Svensson, E.M.; Alberdi, A.; Gunther, T.; Izagirre, N.; Munters, A.R.; Alonso, S.; Ioana, M.; Ridiche, F.; Soficaru, A.; Jakobsson, M.; Netea, M.G.; Rua, C. de la

    2016-01-01

    After the dispersal of modern humans (Homo sapiens) Out of Africa, hominins with a similar morphology to that of present-day humans initiated the gradual demographic expansion into Eurasia. The mitogenome (33-fold coverage) of the Pestera Muierii 1 individual (PM1) from Romania (35 ky cal BP) we

  6. Life cycle carbon footprint of shale gas: review of evidence and implications.

    Science.gov (United States)

    Weber, Christopher L; Clavin, Christopher

    2012-06-05

    The recent increase in the production of natural gas from shale deposits has significantly changed energy outlooks in both the US and world. Shale gas may have important climate benefits if it displaces more carbon-intensive oil or coal, but recent attention has discussed the potential for upstream methane emissions to counteract this reduced combustion greenhouse gas emissions. We examine six recent studies to produce a Monte Carlo uncertainty analysis of the carbon footprint of both shale and conventional natural gas production. The results show that the most likely upstream carbon footprints of these types of natural gas production are largely similar, with overlapping 95% uncertainty ranges of 11.0-21.0 g CO(2)e/MJ(LHV) for shale gas and 12.4-19.5 g CO(2)e/MJ(LHV) for conventional gas. However, because this upstream footprint represents less than 25% of the total carbon footprint of gas, the efficiency of producing heat, electricity, transportation services, or other function is of equal or greater importance when identifying emission reduction opportunities. Better data are needed to reduce the uncertainty in natural gas's carbon footprint, but understanding system-level climate impacts of shale gas, through shifts in national and global energy markets, may be more important and requires more detailed energy and economic systems assessments.

  7. Factors that affect the ecological footprint depending on the different income levels

    Directory of Open Access Journals (Sweden)

    Sheng-Tung Chen

    2016-05-01

    Full Text Available The ecological footprint provides a method for measuring how much lands can support the consumption of the natural resources. Development and biocapacity debates revolve mainly around the factors that affect the ecological footprint and the approaches to improve the environmental quality. Therefore, we conducted the panel analysis of data for 99 countries from 1981 to 2006 to determine what factors affect the ecological footprint. The empirical results show that the effect of GDP per capita on the ecological footprint varies for different income levels. The effect of urbanization is significantly positive across income levels, which means that the higher the rate of urbanization in high or low income country, the higher the ecological footprint. As developing countries pursue economic development, there will be an impact on the environment. The developed countries may seek to develop their economies through activities that are more detrimental to the environment. Additionally, the export of goods and services divided by GDP is significant, which means that the higher the volume of exports, the greater the burden on the environment. However, this effect is not significant across different income level models. The income effect may explain the diverse effects of export on the environment. Therefore, panel data analysis and income classification are necessary to discuss the effect of export on the environment.

  8. Using hybrid method to evaluate carbon footprint of Xiamen City, China

    International Nuclear Information System (INIS)

    Lin, Jianyi; Liu, Yuan; Meng, Fanxin; Cui, Shenghui; Xu, Lilai

    2013-01-01

    For more holistic inventory estimation, this paper uses a hybrid approach to access the carbon footprint of Xiamen City in 2009. Besides carbon emissions from the end-use sector activities (called Scope 1+2 by WRI/WBCSD) in normal research, carbon emissions from the cross-boundary traffic and the embodied energy of key urban imported materials (namely Scope 3) were also included. The results are as follow: (1) Carbon emissions within Scope 1+2 only take up 66.14% of total carbon footprint, while emissions within Scope 3 which have usually been ignored account for 33.84%. (2) Industry is the most carbon-intensive end use sector which contributes 32.74% of the total carbon footprint and 55.13% of energy use emissions in Scope 1+2. (3) The per capita carbon footprint of Xiamen is just about one-third of that in Denver. (4) Comparing with Denver, the proportion of embodied emissions in Xiamen was 10.60% higher than Denver. Overall, Xiamen is relatively a low-carbon city with characters of industrial carbon-intensive and high embodied emissions. Further analysis indicates that the urbanization and industrialization in Xiamen might cause more material consumption and industrial emissions. These highlight the importance of management for Scope 3 emissions in the developing cities. - Highlights: • Carbon emissions from Scope 1+2+3 are calculated for Xiamen City, China. • Carbon footprint in Xiamen is industrial carbon-intensive and high embodied emissions. • Management for Scope 3 emissions in the developing cities is important

  9. High-Resolution Water Footprints of Production of the United States

    Science.gov (United States)

    Marston, Landon; Ao, Yufei; Konar, Megan; Mekonnen, Mesfin M.; Hoekstra, Arjen Y.

    2018-03-01

    The United States is the largest producer of goods and services in the world. Rainfall, surface water supplies, and groundwater aquifers represent a fundamental input to economic production. Despite the importance of water resources to economic activity, we do not have consistent information on water use for specific locations and economic sectors. A national, spatially detailed database of water use by sector would provide insight into U.S. utilization and dependence on water resources for economic production. To this end, we calculate the water footprint of over 500 food, energy, mining, services, and manufacturing industries and goods produced in the United States. To do this, we employ a data intensive approach that integrates water footprint and input-output techniques into a novel methodological framework. This approach enables us to present the most detailed and comprehensive water footprint analysis of any country to date. This study broadly contributes to our understanding of water in the U.S. economy, enables supply chain managers to assess direct and indirect water dependencies, and provides opportunities to reduce water use through benchmarking. In fact, we find that 94% of U.S. industries could reduce their total water footprint more by sourcing from more water-efficient suppliers in their supply chain than they could by converting their own operations to be more water-efficient.

  10. Estimating Green Water Footprints in a Temperate Environment

    Directory of Open Access Journals (Sweden)

    Tim Hess

    2010-07-01

    Full Text Available The “green” water footprint (GWF of a product is often considered less important than the “blue” water footprint (BWF as “green” water generally has a low, or even negligible, opportunity cost. However, when considering food, fibre and tree products, is not only a useful indicator of the total appropriation of a natural resource, but from a methodological perspective, blue water footprints are frequently estimated as the residual after green water is subtracted from total crop water use. In most published studies, green water use (ETgreen has been estimated from the FAO CROPWAT model using the USDA method for effective rainfall. In this study, four methods for the estimation of the ETgreen of pasture were compared. Two were based on effective rainfall estimated from monthly rainfall and potential evapotranspiration, and two were based on a simulated water balance using long-term daily, or average monthly, weather data from 11 stations in England. The results show that the effective rainfall methods significantly underestimate the annual ETgreen in all cases, as they do not adequately account for the depletion of stored soil water during the summer. A simplified model, based on annual rainfall and reference evapotranspiration (ETo has been tested and used to map the average annual ETgreen of pasture in England.

  11. Water Footprint Assessment in the Agro-industry: A Case Study of Soy Sauce Production

    OpenAIRE

    Aulia Firda Alfiana; Purwanto

    2018-01-01

    In terms of global water scarcity, the water footprint is an indicator of the use of water resources that given knowledge about the environmental impact of consuming a product. The sustainable use of water resources nowadays bring challenges related to the production and consumption phase of water intensive related goods such as in the agro-industry. The objective of the study was to assessment the total water footprint from soy sauce production in Grobogan Regency. The total water footprint ...

  12. Rethinking environmental stress from the perspective of an integrated environmental footprint: Application in the Beijing industry sector.

    Science.gov (United States)

    Hu, Jingru; Huang, Kai; Ridoutt, Bradley G; Yu, Yajuan; Wei, Jing

    2018-05-13

    Individual footprint indicators are limited in that they usually only address one specific environmental aspect. For this reason, assessments involving multiple footprint indicators are preferred. However, the interpretation of a profile of footprint indicators can be difficult as the relative importance of the different footprint results is not readily discerned by decision-makers. In this study, a time series (1997-2012) of carbon, water and land footprints was calculated for industry sectors in the Beijing region using input-output analysis. An integrated environmental footprint (IEF) was subsequently developed using normalization and entropy weighting. The results show that steep increases in environmental footprint have accompanied Beijing's rapid economic development. In 2012, the Primary Industry had the largest IEF (8.32); however, the Secondary Industry had the greatest increase over the study period, from 0.19 to 6.37. For the Primary Industry, the greatest contribution to the IEF came from the land footprint. For the Secondary and Tertiary Industries, the water footprint was most important. Using the IEF, industry sectors with low resource utilization efficiency and high greenhouse gas emissions intensity can be identified. As such, the IEF can help to inform about industry sectors which should be given priority for modernization as well as the particular footprints that require priority attention in each sector. The IEF can also be helpful in identifying industry sectors that could be encouraged to expand within the Beijing region as they are especially efficient in terms of value adding relative to IEF. Other industries, over time, may be better located in other regions that do not face the same environmental pressures as Beijing. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Tetradactyl footprints of an unknown affinity theropod dinosaur from the Upper Jurassic of Morocco.

    Directory of Open Access Journals (Sweden)

    Jaouad Nouri

    Full Text Available BACKGROUND: New tetradactyl theropod footprints from Upper Jurassic (Oxfordian-Kimmeridgian have been found in the Iouaridène syncline (Morocco. The tracksites are at several layers in the intermediate lacustrine unit of Iouaridène Formation. The footprints were named informally in previous works "Eutynichnium atlasipodus". We consider as nomen nudum. METHODOLOGY/PRINCIPAL FINDINGS: Boutakioutichnium atlasicus ichnogen. et ichnosp. nov. is mainly characterized by the hallux impression. It is long, strong, directed medially or forward, with two digital pads and with the proximal part of the first pad in lateral position. More than 100 footprints in 15 trackways have been studied with these features. The footprints are large, 38-48 cm in length, and 26-31 cm in width. CONCLUSIONS/SIGNIFICANCE: Boutakioutichnium mainly differs from other ichnotaxa with hallux impression in lacking metatarsal marks and in not being a very deep footprint. The distinct morphology of the hallux of the Boutakioutichnium trackmaker -i.e. size and hallux position- are unique in the dinosaur autopodial record to date.

  14. Green Remediation Best Management Practices: Sites with Leaking Underground Storage Tank Systems

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

  15. Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family

    Science.gov (United States)

    Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

    2018-01-01

    The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index (EPI), the ecological occupancy index (EOI), the ecological economic coordination index (EECI), the GHG (Greenhouse Gas) emission index (CEI), the water resources stress index (WSI), and the sustainable development index (SDI). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions. PMID:29389886

  16. Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family.

    Science.gov (United States)

    Zhao, Jing; Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

    2018-02-01

    The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index ( EPI ), the ecological occupancy index ( EOI ), the ecological economic coordination index ( EECI ), the GHG (Greenhouse Gas) emission index ( CEI ), the water resources stress index ( WSI ), and the sustainable development index ( SDI ). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions.

  17. Assessment of food-water nexus by water footprint: a case study in Saskatchewan, Canada

    Science.gov (United States)

    Zhao, Y.; Si, B.

    2016-12-01

    It is important but challengeable to understand the water-food nexus complexity. The water footprint (WF), a relatively new index, is a comprehensive indicator that can be used to evaluate crop water production. This paper aims to 1) determine how water footprint changes at different crop rotational types; 2) investigate what is difference if WF is calculated by yield-based or protein-based; and 3) explore how virtual water flows are responding to regional meteorological, agricultural, and socio-economic factors. The result provided the water footprint and virtual water flow exemplified for Saskatchewan agri-food production industries. By using the water footprint, we determined the best rotation for pulse crops in terms of efficiency of water productivity and water-saving opportunity. While yield is a comprehensive index to assess the productivity (yield-based WF), it underestimated the contribution of some crops, such as pulse crops with relatively low yield but high protein contents (protein-based WF). Consequently, we concluded that water-saving benefits can be achieved by the development and adoption of water efficient technology and better virtual water flows may be achieved by increased area of low water footprint in Saskatchewan. Our finding improves the current concepts of water and food security, informs production and trade decisions, and thus suggests optimal strategies by reduced water footprints in terms of agricultural management.

  18. A full value-chain Water Footprint Assessment to help informed decision in corporate sustainability strategies

    Science.gov (United States)

    Zhang, Guoping; Chico Zamanilo, Daniel; Bai, Xue; Ren, Xiajing; Chen, Rong; Qin, Jun

    2017-04-01

    This study evaluated the water footprint (WF) of five production facilities along Muyuan Foodstuff Co. Ltd's (Muyuan) value chain, and assessed the sustainability and impact of their water footprints at the river catchment level. Muyuan, a large-scale, integrated pig breeder and producer in China, is keen to fulfil its corporate social responsibilities and committed to ensuring food quality and security, promoting environmental protection, and participating in catchment water resources management. Formulating corporate water related sustainability strategies, however, has been challenging. This study carried out a comprehensive Water Footprint Assessment (WFA) for Muyuan's full value chain to assist in formulating such strategies and setting up action plans with water footprint reduction targets. The study showed that that the water footprint of the supply chain, resulting from crops and crop products used in Muyuan's feed production facility is a major contributor to Muyuan's facilities' water footprint. From the perspective of the direct WF at the facilities, addressing the impact on water quality from effluents (i.e. the grey water footprint) at hog farms is a critical component of any water sustainability strategy. From the blue WF perspective, there are opportunities to reduce blue water consumption at hog farms through improved technology and implementation of best practices. The water footprint sustainability assessment in this study indicated that Muyuan operates in a catchment which is already under water stress and is a hotspot in terms of both blue water scarcity and water pollution level. The study helped identify potential water-related risks and opportunities for improving Muyuan's water use efficiency as well as ways Muyuan could contribute to sustainable water resources management in the catchment within which it operates. This is an innovative application of WFA in the livestock sector and supports the development of Muyuan's corporate water

  19. Individualizing characteristics of footprints in Malaysian Malays for person identification from a forensic perspective

    Directory of Open Access Journals (Sweden)

    T. Nataraja Moorthy

    2015-03-01

    Full Text Available One of the valuable physical evidence that a suspect leaves unintentionally at a crime scene is likely to include footprints. Physical evidence needs to be utilized to express individual characteristics. Very keen analysis of footprints can provide useful information to establish personal identity and ease the crime investigation. The present study aims to analyze and describe the individual characteristics of footprints of Malaysian Malays from a forensic perspective in a sample of 400 adult Malay participants consisting of 200 males and 200 females. The footprints were collected using an inkless shoe print kit (Carolina, USA. Various features of the toes, humps in the toe line, phalange marks, flatfoot condition, pits, cracks, corns, etc., were investigated. The frequency of these characteristics was recorded. The frequency of the fibularis-type foot is the highest, followed by the tibialis-type, the intermediate-type and the midularis-type is found to have the least frequency in both the sexes. This sequence is found to be different from the sequence observed in the north Indian population. Two humps have been found most often in male footprints followed by three humps and zero hump is found to be the least frequent. While in female footprints, three humps have been found, most often followed by two humps and zero hump is found to be the least frequent. Other identifying features are also highlighted using illustrations. This trait shows bilateral variation. The morphological length of toes and some other features in this study are found to be different from footprints of Indian Tamils, North Indian Gujjars and the Thai population.

  20. Carbon and water footprints of irrigated corn and non-irrigated wheat in Northeast Spain.

    Science.gov (United States)

    Abrahão, Raphael; Carvalho, Monica; Causapé, Jesús

    2017-02-01

    Irrigation increases yields and allows several crops to be produced in regions where it would be naturally impossible due to limited rainfall. However, irrigation can cause several negative environmental impacts, and it is important to understand these in depth for the correct application of mitigation measures. The life cycle assessment methodology was applied herein to compare the main irrigated and non-irrigated crops in Northeast Spain (corn and wheat, respectively), identifying those processes with greater contribution to environmental impacts (carbon and water footprint categories) and providing scientifically-sound information to facilitate government decisions. Due to concerns about climate change and water availability, the methods selected for evaluation of environmental impacts were IPCC 2013 GWP (carbon footprint) and water scarcity indicator (water footprint). The area studied, a 7.38-km 2 basin, was monitored for 12 years, including the period before, during, and after the implementation of irrigation. The functional unit, to which all material and energy flows were associated with, was the cultivation of 1 ha, throughout 1 year. The overall carbon footprint for irrigated corn was higher, but when considering the higher productivity achieved with irrigation, the emissions per kilogram of corn decrease and finally favor this irrigated crop. When considering the water footprint, the volumes of irrigation water applied were so high that productivity could not compensate for the negative impacts associated with water use in the case of corn. Nevertheless, consideration of productivities and gross incomes brings the results closer. Fertilizer use (carbon footprint) and irrigation water (water footprint) were the main contributors to the negative impacts detected.

  1. L'evolució del cervell humà: des d'Homo erectus a Homo sapiens

    OpenAIRE

    Coma Almenar, Herena

    2017-01-01

    Homo sapiens presenta unes característiques morfològiques cerebrals que han possibilitat les capacitats cognitives que podem observar actualment. Però no ha estat a causa d'un fet puntual en la nostra historia evolutiva, sinó que anys de canvis en la dotació genètica i l'adaptació a l'entorn ha procurat el nostre augment del volum encefàlic i de la seva reorganització i connectivitat, on la asimetria cerebral ha estat l'estratègia per optimitzar els recursos neuronals. No obstant, en el regis...

  2. The water footprint of food aid

    NARCIS (Netherlands)

    Jackson, Nicole; Konar, Megan; Hoekstra, Arjen Ysbert

    2015-01-01

    Food aid is a critical component of the global food system, particularly when emergency situations arise. For the first time, we evaluate the water footprint of food aid. To do this, we draw on food aid data from theWorld Food Programme and virtual water content estimates from WaterStat. We find

  3. Uncovering regional disparity of China's water footprint and inter-provincial virtual water flows.

    Science.gov (United States)

    Dong, Huijuan; Geng, Yong; Fujita, Tsuyoshi; Fujii, Minoru; Hao, Dong; Yu, Xiaoman

    2014-12-01

    With rapid economic development in China, water crisis is becoming serious and may impede future sustainable development. The uneven distribution of water resources further aggravates such a problem. Under such a circumstance, the concepts of water footprint and virtual water have been proposed in order to respond water scarcity problems. This paper focuses on studying provincial disparity of China's water footprints and inter-provincial virtual water trade flows by adopting inter-regional input-output (IRIO) method. The results show that fast developing areas with larger economic scales such as Guangdong, Jiangsu, Shandong, Zhejiang, Shanghai and Xinjiang had the largest water footprints. The most developed and water scarce areas such as Shanghai, Beijing, Tianjin and Shandong intended to import virtual water, a rational choice for mitigating their water crisis. Xinjiang, Jiangsu, Heilongjiang, Inner Mongolia, Guangxi and Hunan, had the largest per GDP water intensities and were the main water import regions. Another key finding is that agriculture water footprint was the main part in water footprint composition and water export trade. On the basis of these findings, policy implications on agriculture geographical dispersion, consumption behavior changes, trade structure adjustment and water use efficiency improvement are further discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Carbon footprint of dairy goat milk production in New Zealand.

    Science.gov (United States)

    Robertson, Kimberly; Symes, Wymond; Garnham, Malcolm

    2015-07-01

    The aim of this study was to assess the cradle-to-farm gate carbon footprint of indoor and outdoor dairy goat farming systems in New Zealand, identifying hotspots and discussing variability and methodology. Our study was based on the International Organization for Standardization standards for life cycle assessment, although only results for greenhouse gas emissions are presented. Two functional units were included: tonnes of CO2-equivalents (CO2e) per hectare (ha) and kilograms of CO2e per kilogram of fat- and protein-corrected milk (FPCM). The study covered 5 farms, 2 farming systems, and 3yr. Two methods for the calculation of enteric methane emissions were assessed. The Lassey method, as used in the New Zealand greenhouse gas inventory, provided a more robust estimate of emissions from enteric fermentation and was used in the final calculations. The alternative dry matter intake method was shown to overestimate emissions due to use of anecdotal assumptions around actual consumption of feed. Economic allocation was applied to milk and co-products. Scenario analysis was performed on the allocation method, nitrogen content of manure, manure management, and supplementary feed choice. The average carbon footprint for the indoor farms (n=3) was 11.05 t of CO2e/ha and 0.81kg of CO2e/kg of FPCM. For the outdoor farms (n=2), the average was 5.38 t of CO2e/ha and 1.03kg of CO2e/kg of FPCM. The average for all 5 farms was 8.78 t of CO2e/ha and 0.90kg of CO2e/kg of FPCM. The results showed relatively high variability due to differences in management practices between farms. The 5 farms covered 10% of the total dairy goat farms but may not be representative of an average farm. Methane from enteric fermentation was a major emission source. The use of supplementary feed was highly variable but an important contributor to the carbon footprint. Nitrous oxide can contribute up to 18% of emissions. Indoor goat farming systems produced milk with a significantly higher carbon

  5. Decomposition of the Urban Water Footprint of Food Consumption: A Case Study of Xiamen City

    Directory of Open Access Journals (Sweden)

    Jiefeng Kang

    2017-01-01

    Full Text Available Decomposition of the urban water footprint can provide insight for water management. In this paper, a new decomposition method based on the log-mean Divisia index model (LMDI was developed to analyze the driving forces of water footprint changes, attributable to food consumption. Compared to previous studies, this new approach can distinguish between various factors relating to urban and rural residents. The water footprint of food consumption in Xiamen City, from 2001 to 2012, was calculated. Following this, the driving forces of water footprint change were broken down into considerations of the population, the structure of food consumption, the level of food consumption, water intensity, and the population rate. Research shows that between 2001 and 2012, the water footprint of food consumption in Xiamen increased by 675.53 Mm3, with a growth rate of 88.69%. Population effects were the leading contributors to this change, accounting for 87.97% of the total growth. The food consumption structure also had a considerable effect on this increase. Here, the urban area represented 94.96% of the water footprint increase, driven by the effect of the food consumption structure. Water intensity and the urban/rural population rate had a weak positive cumulative effect. The effects of the urban/rural population rate on the water footprint change in urban and rural areas, however, were individually significant. The level of food consumption was the only negative factor. In terms of food categories, meat and grain had the greatest effects during the study period. Controlling the urban population, promoting a healthy and less water-intensive diet, reducing food waste, and improving agriculture efficiency, are all elements of an effective approach for mitigating the growth of the water footprint.

  6. Synchrotron X-Ray Footprinting on Tour

    OpenAIRE

    Bohon, Jen; Ralston, Corie; D'Mello, Rhijuta; Gupta, Sayan; Chance, Mark R.

    2014-01-01

    Synchrotron X-ray footprinting resources were investigated at a variety of beamlines and synchrotron facilities to understand their potential for a mobile general user. Results indicate that viable resources exist at each synchrotron investigated such that a prospective user need only provide a simple flow apparatus and sample handling accessories to perform this technique.

  7. The footprint of bottom trawling in European waters: distribution, intensity, and seabed integrity

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Bastardie, Francois; Hinzen, N.T.

    2017-01-01

    for 2010-2012 at a grid cell resolution of 1 x 1 min longitude and latitude. Trawling intensity profiles with seabed impact at the surface and subsurface level are presented for 14 management areas in the North-east Atlantic, Baltic Sea and Mediterranean Sea. The footprint of the management areas ranged...... between 53-99% and 6-94% for the depth zone from 0 to 200 m (Shallow) and from 201 to 1000 m (Deep), respectively. The footprint was estimated as the total area of all grid cells that were trawled fully or partially. Excluding the untrawled proportions reduced the footprint estimates to 28-85% and 2......-77%. Largest footprints per unit landings were observed off Portugal and in the Mediterranean Sea. Mean trawling intensity ranged between 0.5 and 8.5 times per year, but was less in the Deep zone with a maximum intensity of 6.4. Highest intensities were recorded in the Skagerrak-Kattegat, Iberian Portuguese...

  8. Small Footprint Solar/Wind-powered CASTNET System Dataset

    Data.gov (United States)

    U.S. Environmental Protection Agency — In this Research Effort “Small Footprint Solar/Wind-Powered CASTNET System” there are two data sets. One data set contains atmospheric concentration measurements, at...

  9. Product carbon footprint developments and gaps

    DEFF Research Database (Denmark)

    Kronborg Jensen, Jesper

    2012-01-01

    Purpose - Over the last decade, multiple initiatives have been undertaken to learn how to capture the carbon footprint of a supply chain at a product level. The purpose of this paper is to focus on the process of standardization to secure consistency of product carbon footprinting (PCF) and to ou....../value - Papers that outline the standardization process for PCF have been examined, but this paper adds value by categorizing the field, outlining the latest standards, and by being the first paper to compare standards for PCF on selected criteria and identify gaps....... when conducting a PCF, and a paradox exists concerning methods for securing future standardization of PCF. Research limitations/implications - Standards for evaluating emission of greenhouse gases (GHGs) in supply chains are evaluated without consideration of other environmental impacts. In addition......, the research only compares international standards, thereby excluding national initiatives. Practical implications - Standardization efforts can be expected to shape the future practice of measuring emission of GHGs in companies and supply chains which provides a framework for reducing impacts. Originality...

  10. Carbon footprint from dairy farming system

    DEFF Research Database (Denmark)

    Della Riva, A.; Kristensen, Troels; De Marchi1, M.

    2014-01-01

    Aim of the present study was to estimate the carbon footprint (CF) of milk production at farm gate considering two dairy cattle breeds, Holstein Friesian (HF) and Jersey (JE). Using Italian inventory data the emissions of CO2eq per kg ECM for dairy herds of HF and JE breed were estimated. The res......Aim of the present study was to estimate the carbon footprint (CF) of milk production at farm gate considering two dairy cattle breeds, Holstein Friesian (HF) and Jersey (JE). Using Italian inventory data the emissions of CO2eq per kg ECM for dairy herds of HF and JE breed were estimated....... The results show 0.80 kg CO2eq/kg ECM in JE herd, while 0.96 kg CO2eq/kg ECM in HF herd. The main differences were due to the level of dry matter intake, milk yield and fertility traits. Indeed, JE herd showed a lower milk yield than HF herd, a lower DMI and better fertility, determining less production...

  11. The water footprint of tourism in Spain

    NARCIS (Netherlands)

    Cazcarro, I.; Hoekstra, Arjen Ysbert; Sánchez Chóliz, J.

    2014-01-01

    This study complements the water footprint (WF) estimations for Spain, incorporating insights of the process analysis and input–output (IO) analysis. We evaluate the virtual (both blue and green consumed) water trade of agricultural and industrial products, but also of services, especially through

  12. Ranking U-Sapiens 2010-2

    Directory of Open Access Journals (Sweden)

    Carlos-Roberto Peña-Barrera

    2011-08-01

    Full Text Available Los principales objetivos de esta investigación son los siguientes: (1 que la comunidad científica nacional e internacional y la sociedad en general co-nozcan los resultados del Ranking U-Sapiens Colombia 2010_2, el cual clasifica a cada institución de educación superior colombiana según puntaje, posición y cuartil; (2 destacar los movimientos más importantes al comparar los resultados del ranking 2010_1 con los del 2010_2; (3 publicar las respuestas de algunos actores de la academia nacional con respecto a la dinámica de la investigación en el país; (4 reconocer algunas instituciones, medios de comunicación e investigadores que se han interesado a modo de reflexión, referenciación o citación por esta investigación; y (5 dar a conocer el «Sello Ranking U-Sapiens Colombia» para las IES clasificadas. El alcance de este estudio en cuanto a actores abordó todas y cada una de las IES nacionales (aunque solo algunas lograran entrar al ranking y en cuanto a tiempo, un periodo referido al primer semestre de 2010 con respecto a: (1 los resultados 2010-1 de revistas indexadas en Publindex, (2 los programas de maestrías y doctorados activos durante 2010-1 según el Ministerio de Educación Nacional, y (3 los resultados de grupos de investigación clasificados para 2010 según Colciencias. El método empleado para esta investigación es el mismo que para el ranking 2010_1, salvo por una especificación aún más detallada en uno de los pasos del modelo (las variables α, β, γ; es completamente cuantitativo y los datos de las variables que fundamentan sus resultados provienen de Colciencias y el Ministerio de Educación Nacional; y en esta ocasión se darán a conocer los resultados por variable para 2010_1 y 2010_2. Los resultados más relevantes son estos: (1 entraron 8 IES al ranking y salieron 3; (2 las 3 primeras IES son públicas; (3 en total hay 6 instituciones universitarias en el ranking; (4 7 de las 10 primeras IES son

  13. Reducing Agricultural Water Footprints at the Farm Scale: A Case Study in the Beijing Region

    Directory of Open Access Journals (Sweden)

    Jing Huang

    2015-12-01

    Full Text Available Beijing is one of the most water-stressed regions in the world. Reducing agricultural water use has long been the basis of local policy for sustainable water use. In this article, the potential to reduce the life cycle (cradle to gate water footprints of wheat and maize that contribute to 94% of the local cereal production was assessed. Following ISO 14046, consumptive and degradative water use for the wheat-maize rotation system was modeled under different irrigation and nitrogen (N application options. Reducing irrigation water volume by 33.3% compared to current practice did not cause a significant yield decline, but the water scarcity footprint and water eutrophication footprint were decreased by 27.5% and 23.9%, respectively. Similarly, reducing the N application rate by 33.3% from current practice did not cause a significant yield decline, but led to a 52.3% reduction in water eutrophication footprint while maintaining a similar water scarcity footprint. These results demonstrate that improving water and fertilizer management has great potential for reducing the crop water footprints at the farm scale. This situation in Beijing is likely to be representative of the challenge facing many of the water-stressed regions in China, where a sustainable means of agricultural production must be found.

  14. A simulation-based approach for evaluating and comparing the environmental footprints of beef production systems.

    Science.gov (United States)

    Rotz, C A; Isenberg, B J; Stackhouse-Lawson, K R; Pollak, E J

    2013-11-01

    A methodology was developed and used to determine environmental footprints of beef cattle produced at the U.S. Meat Animal Research Center (MARC) in Clay Center, NE, with the goal of quantifying improvements achieved over the past 40 yr. Information for MARC operations was gathered and used to establish parameters representing their production system with the Integrated Farm System Model. The MARC farm, cow-calf, and feedlot operations were each simulated over recent historical weather to evaluate performance, environmental impact, and economics. The current farm operation included 841 ha of alfalfa and 1,160 ha of corn to produce feed predominately for the beef herd of 5,500 cows, 1,180 replacement cattle, and 3,724 cattle finished per year. Spring and fall cow-calf herds were fed on 9,713 ha of pastureland supplemented through the winter with hay and silage produced by the farm operation. Feedlot cattle were backgrounded for 3 mo on hay and silage with some grain and finished over 7 mo on a diet high in corn and wet distillers grain. For weather year 2011, simulated feed production and use, energy use, and production costs were within 1% of actual records. A 25-yr simulation of their current production system gave an average annual carbon footprint of 10.9±0.6 kg of CO2 equivalent units per kg BW sold, and the energy required to produce that beef (energy footprint) was 26.5±4.5 MJ/kg BW. The annual water required (water footprint) was 21,300±5,600 L/kg BW sold, and the water footprint excluding precipitation was 2,790±910 L/kg BW. The simulated annual cost of producing their beef was US$2.11±0.05/kg BW. Simulation of the production practices of 2005 indicated that the inclusion of distillers grain in animal diets has had a relatively small effect on environmental footprints except that reactive nitrogen loss has increased 10%. Compared to 1970, the carbon footprint of the beef produced has decreased 6% with no change in the energy footprint, a 3% reduction

  15. Quantifying the Water Footprint of Manufactured Products: A Case Study of Pitcher Water Filters

    Directory of Open Access Journals (Sweden)

    Ashley Barker

    2012-01-01

    Full Text Available Fresh water is a finite resource that is critically needed bysociety for a variety of purposes. The demand for freshwater will grow as the world population and global livingstandard increase, and fresh water shortages will becomemore commonplace. This will put significant stress onsociety. It has been argued that fresh water may becomethe next oil, and efforts have to be made to better manageits fresh water consumption by agricultural and domesticusers. Industry also uses large amounts. Surprisingly, onlyrecently is serious attention being directed toward waterrelatedissues. This effort to quantify the water footprint ofa manufactured product represents one of the first initiativesto characterize the role of water in a discrete good.This study employed a life cycle assessment methodologyto determine the water footprint of a pitcher water filter.This particular product was selected because many waterintensivematerials and processes are needed to produceits major components: for example, agricultural processesused to produce activated carbon and petrochemicalprocesses used to produce the polypropylene casing. Inaddition, a large amount of water is consumed during theproduct’s use phase. Water data was obtained from theEcoinvent 2.1 database and categorized as either beingassociated with blue or green water.The blue water footprint (surface water consumption forthe pitcher water filter was 76 gallons per filter: 10 gallonsconsumed for materials extraction, 15 gallons for themanufacturing stage, and 50 gallons during the use phase.The green water footprint (precipitation was associatedwith the cultivation of the coconut tree; activated carbonis obtained from the coconut shells. The green waterfootprint was calculated to be 164 gallons per filter.The overall water footprint was 240 gallons per filter;the filter footprint is heavily dominated by green water(68% rather than blue water (32%. Future studies mayinvestigate how the production and

  16. Reidentification of Ebola Virus E718 and ME as Ebola Virus/H.sapiens-tc/COD/1976/Yambuku-Ecran.

    Science.gov (United States)

    Kuhn, Jens H; Lofts, Loreen L; Kugelman, Jeffrey R; Smither, Sophie J; Lever, Mark S; van der Groen, Guido; Johnson, Karl M; Radoshitzky, Sheli R; Bavari, Sina; Jahrling, Peter B; Towner, Jonathan S; Nichol, Stuart T; Palacios, Gustavo

    2014-11-20

    Ebola virus (EBOV) was discovered in 1976 around Yambuku, Zaire. A lack of nomenclature standards resulted in a variety of designations for each isolate, leading to confusion in the literature and databases. We sequenced the genome of isolate E718/ME/Ecran and unified the various designations under Ebola virus/H.sapiens-tc/COD/1976/Yambuku-Ecran. Copyright © 2014 Kuhn et al.

  17. Estimation of calcaneal loading during standing from human footprint depths using 3D scanner

    Science.gov (United States)

    Wibowo, Dwi Basuki; Haryadi, Gunawan Dwi; Widodo, Achmad; Rahayu, Sri Puji

    2017-01-01

    This research studies the relationship between footprint depths and load in the calcaneal area when human standing in an upright posture. Footprint depths are deformation in the calcaneal area obtained from the z-value extraction of the Boolean operation acquired from unloaded foot scanning using 3D scanner and loaded foot using foot plantar scanner. To compare peak loads estimated from footprint depth maximum, force sensing resistor (FSR) sensor is attached over the shoe insole with zero heel height in the calcaneal area. Twenty participants were selected from students of Mechanical Engineering Department Diponegoro University with the average the age and the body weight 19.5 years and 55.27 kg respectively. Results that were relatively accurate was found on the calcaneal loading estimation by footprint depth is presented by curve and data distribution which are in good agreement with the result of the measurement. A significant difference in estimating calcaneal loading is mainly caused by plantar foot position of research subjects which is not perpendicular to foot ankle and hallux. In addition, plantar foot position which bends to front/back/side affects the result of footprint depths.

  18. Aerial Imagery and LIDAR Data Fusion for Unambiguous Extraction of Adjacent Level-Buildings Footprints

    Science.gov (United States)

    Mola Ebrahimi, S.; Arefi, H.; Rasti Veis, H.

    2017-09-01

    Our paper aims to present a new approach to identify and extract building footprints using aerial images and LiDAR data. Employing an edge detector algorithm, our method first extracts the outer boundary of buildings, and then by taking advantage of Hough transform and extracting the boundary of connected buildings in a building block, it extracts building footprints located in each block. The proposed method first recognizes the predominant leading orientation of a building block using Hough transform, and then rotates the block according to the inverted complement of the dominant line's angle. Therefore the block poses horizontally. Afterwards, by use of another Hough transform, vertical lines, which might be the building boundaries of interest, are extracted and the final building footprints within a block are obtained. The proposed algorithm is implemented and tested on the urban area of Zeebruges, Belgium(IEEE Contest,2015). The areas of extracted footprints are compared to the corresponding areas in the reference data and mean error is equal to 7.43 m2. Besides, qualitative and quantitative evaluations suggest that the proposed algorithm leads to acceptable results in automated precise extraction of building footprints.

  19. Water footprint as an indicator of agricultural productivity in African countries

    Science.gov (United States)

    Chico Zamanillo, Daniel; Zhang, Guoping; Mathews, Ruth

    2017-04-01

    Sub-Saharan Africa is one of the regions with the largest scope for improved agricultural development that would contribute to global food security while respecting environmental boundaries. More importantly, undernourishment is a challenge for many African countries and needs to be addressed to achieve the 2030 Agenda for Sustainable Development. This study was conducted to support the Netherlands Ministry of Foreign Affair's Inclusive Green Growth aim of increasing water use efficiency by 25% in Dutch financed projects. A water footprint profile was developed for 7 Sub-Saharan countries; Benin, Ethiopia, Ghana, Kenya, Mali, Mozambique and Rwanda. The profiles provide an overview of water use from the perspective of the goods produced within the country, the consumption of goods, in particular agricultural crops, whether these goods are produced domestically or imported from other countries and the level of blue water scarcity experienced in the country. Across all countries, key food crops such as maize, and sorghum have low water productivity relative to the global water footprint benchmark. Export crops such as tea in Kenya or cocoa in Ghana show a good performance over global production. Furthermore, the water footprint of crops over the period 2006-2013 was compared to data from the period 1996-2005. Changes in yield and the resulting changes in the water footprint were assessed for both food and export crops. Yields in food crops improved in some countries, and in some years, but not consistently across all countries and years. The greatest gains in water productivity were in key export crops. The results provide insights into whether improvements have been made in water productivity in recent years and through comparison with the global water footprint benchmark, remaining opportunities for further gains in water productivity were identified. Going forward, policies that will enhance further improvement in water productivity and support greater food and

  20. Sustainability of the city and its ecological footprint

    Directory of Open Access Journals (Sweden)

    Petrić Jasna

    2004-01-01

    Full Text Available There are some agreed sustainability indicators, even some agreed target values regarding a sustainable city, but they still have to be underpinned by empirical evidence. The common starting point of definitions is generally the destructive impact of the city on its regional and global environment which can be observed in form of the depletion of natural resources and the pollution of soil, water and air. A sustainable city is therefore generally regarded to be the one that is compact and preserves land, has mixed use to increase access and reduce need to travel, is socially and economically balanced, uses clean and renewable energy and recycles all its waste. However, the sustainable city cannot exist as a self-sufficient unit, in ignorance of relationship with its hinterland. The ecological footprint which is the amount of land required to produce resources to sustain our quality of life is a yardstick for measuring the ecological bottom line of sustainability. With a sustainable city target to relieve pressure on the countryside, there is an increasing awareness of the importance of calculating city’s ecological footprint and see how it relates to the target global average. Although problem of reducing ecological footprints primarily concerns the wealthiest countries, it has to be fully acknowledged in the less economically developed part of the world, while recognising that cities themselves provide many potential solutions.

  1. Coronal ``Wave'': Magnetic Footprint of a Coronal Mass Ejection?

    Science.gov (United States)

    Attrill, Gemma D. R.; Harra, Louise K.; van Driel-Gesztelyi, Lidia; Démoulin, Pascal

    2007-02-01

    We investigate the properties of two ``classical'' EUV Imaging Telescope (EIT) coronal waves. The two source regions of the associated coronal mass ejections (CMEs) possess opposite helicities, and the coronal waves display rotations in opposite senses. We observe deep core dimmings near the flare site and also widespread diffuse dimming, accompanying the expansion of the EIT wave. We also report a new property of these EIT waves, namely, that they display dual brightenings: persistent ones at the outermost edge of the core dimming regions and simultaneously diffuse brightenings constituting the leading edge of the coronal wave, surrounding the expanding diffuse dimmings. We show that such behavior is consistent with a diffuse EIT wave being the magnetic footprint of a CME. We propose a new mechanism where driven magnetic reconnections between the skirt of the expanding CME magnetic field and quiet-Sun magnetic loops generate the observed bright diffuse front. The dual brightenings and the widespread diffuse dimming are identified as innate characteristics of this process.

  2. The Centre for Early Human Behaviour (EHB) at the University of Bergen: A transdisciplinary exploration into the evolution of homo sapiens behaviour

    Science.gov (United States)

    Sobolowski, Stefan; Henshilwood, Christopher; Jansen, Eystein

    2017-04-01

    Homo sapiens was anatomically modern by 200 000 years ago in Africa, but there is no archaeological evidence to demonstrate that behaviour was modern at the time. Attributes of modern behaviour, perhaps inspired by changes in the human brain, are only recognizable after 100 000 years ago. Before we can study the process, we must critically define the criteria for the term 'modern behaviour' and then find a means to recognize such behavior in the record. This seemingly simple research statement involves complex exploration by a team of specialists. In this highly competitive research field our centre will, for the first time, be able to rise to the challenge by combining the skills of cutting-edge scientists in archaeology, climate reconstruction and modelling, and the cognitive and social sciences. Over the next decade we will integrate knowledge and methods from different disciplines to synthesize approaches and contribute to a sophisticated understanding of early human behaviour. Our highly ambitious research program will focus explicitly on rare, well preserved archaeological sites occupied in the period between 100-50 000 years ago because these contain the 'keys' for unlocking the past. A major competitive edge is the EHB Director's 25 years of archaeological experience and his long-term exclusive access, with permits, to a number of the best-preserved sites in the southern Cape, South Africa - a region regarded as a major locus for vital evidence that could inform on the behaviour of early humans. Our planned excavations at existing and new sites and our ground-breaking and innovative interdisciplinary approaches, including climate (The Bjerknes Centre for Climate Research) and cognitive research, to understanding the processes that shaped human cultures. Primarily, EHB will directly address unanswered, first order questions about Homo sapiens: a) what defines the switch to 'modern behaviour', exactly how should this term be defined and then, when, why and

  3. Quantification of carbon footprint of urban roads via life cycle assessment

    DEFF Research Database (Denmark)

    Mao, Ruichang; Duan, Huabo; Dong, Dan

    2017-01-01

    assessment method. For given years (ranged from 2004 to 2013), various activities of urban roads (e.g. newly planned road construction, maintenance of road in use, and road renovation and demolition) have been examined in this study. The results show that the total carbon footprint from urban roads...... in Shenzhen was 260 (±20) thousand tons CO2e in 2013. The major contributor was the materials use (embodied impact) from newly constructed roads, which accounts for 52.3% of the total carbon footprint, followed by the maintenance stage (24.3%). The eco-design process of road construction plays a vital role...... studies attempted to examine the impacts from transport infrastructure, especially at a city or country level. This paper, taking Shenzhen in China (a fast developing megacity) as the case study, is specially designed to quantify the carbon footprint of the urban roads by using streamlined life cycle...

  4. The energy and emissions footprint of water supply for Southern California

    International Nuclear Information System (INIS)

    Fang, A J; Newell, Joshua P; Cousins, Joshua J

    2015-01-01

    Due to climate change and ongoing drought, California and much of the American West face critical water supply challenges. California’s water supply infrastructure sprawls for thousands of miles, from the Colorado River to the Sacramento Delta. Bringing water to growing urban centers in Southern California is especially energy intensive, pushing local utilities to balance water security with factors such as the cost and carbon footprint of the various supply sources. To enhance water security, cities are expanding efforts to increase local water supply. But do these local sources have a smaller carbon footprint than imported sources? To answer this question and others related to the urban water–energy nexus, this study uses spatially explicit life cycle assessment to estimate the energy and emissions intensity of water supply for two utilities in Southern California: Los Angeles Department of Water and Power, which serves Los Angeles, and the Inland Empire Utility Agency, which serves the San Bernardino region. This study differs from previous research in two significant ways: (1) emissions factors are based not on regional averages but on the specific electric utility and generation sources supplying energy throughout transport, treatment, and distribution phases of the water supply chain; (2) upstream (non-combustion) emissions associated with the energy sources are included. This approach reveals that in case of water supply to Los Angeles, local recycled water has a higher carbon footprint than water imported from the Colorado River. In addition, by excluding upstream emissions, the carbon footprint of water supply is potentially underestimated by up to 30%. These results have wide-ranging implications for how carbon footprints are traditionally calculated at local and regional levels. Reducing the emissions intensity of local water supply hinges on transitioning the energy used to treat and distribute water away from fossil fuel, sources such as coal

  5. The energy and emissions footprint of water supply for Southern California

    Science.gov (United States)

    Fang, A. J.; Newell, Joshua P.; Cousins, Joshua J.

    2015-11-01

    Due to climate change and ongoing drought, California and much of the American West face critical water supply challenges. California’s water supply infrastructure sprawls for thousands of miles, from the Colorado River to the Sacramento Delta. Bringing water to growing urban centers in Southern California is especially energy intensive, pushing local utilities to balance water security with factors such as the cost and carbon footprint of the various supply sources. To enhance water security, cities are expanding efforts to increase local water supply. But do these local sources have a smaller carbon footprint than imported sources? To answer this question and others related to the urban water-energy nexus, this study uses spatially explicit life cycle assessment to estimate the energy and emissions intensity of water supply for two utilities in Southern California: Los Angeles Department of Water and Power, which serves Los Angeles, and the Inland Empire Utility Agency, which serves the San Bernardino region. This study differs from previous research in two significant ways: (1) emissions factors are based not on regional averages but on the specific electric utility and generation sources supplying energy throughout transport, treatment, and distribution phases of the water supply chain; (2) upstream (non-combustion) emissions associated with the energy sources are included. This approach reveals that in case of water supply to Los Angeles, local recycled water has a higher carbon footprint than water imported from the Colorado River. In addition, by excluding upstream emissions, the carbon footprint of water supply is potentially underestimated by up to 30%. These results have wide-ranging implications for how carbon footprints are traditionally calculated at local and regional levels. Reducing the emissions intensity of local water supply hinges on transitioning the energy used to treat and distribute water away from fossil fuel, sources such as coal.

  6. Reducing Students' Carbon Footprints Using Personal Carbon Footprint Management System Based on Environmental Behavioural Theory and Persuasive Technology

    Science.gov (United States)

    Lin, Shyh-ming

    2016-01-01

    This study applied environmental behavioural theories to develop a personal carbon footprint management system and used persuasive technology to implement it. The system serves as an educational system to improve the determinants of students' low-carbon behaviours, to promote low-carbon concepts and to facilitate their carbon management. To assess…

  7. The green, blue and grey water footprint of crops and derived crop products

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2011-01-01

    This study quantifies the green, blue and grey water footprint of global crop production in a spatially-explicit way for the period 1996–2005. The assessment improves upon earlier research by taking a high-resolution approach, estimating the water footprint of 126 crops at a 5 by 5 arc minute grid.

  8. The Effect of Land Use on Availability of Japanese Freshwater Resources and Its Significance for Water Footprinting

    Directory of Open Access Journals (Sweden)

    Masaharu Motoshita

    2016-01-01

    Full Text Available All relevant effects on water must be assessed in water footprinting for identifying hotspots and managing the impacts of products, processes, and services throughout the life cycle. Although several studies have focused on physical water scarcity and degradation of water quality, the relevance of land use in water footprinting has not been widely addressed. Here, we aimed to verify the extent of land-use effect in the context of water footprinting. Intensity factors of land use regarding the loss of freshwater availability are modeled by calculating water balance at grid scale in Japan. A water footprint inventory and impacts related to land use are assessed by applying the developed intensity factors and comparing them with those related to water consumption and degradation. Artificial land use such as urban area results in the loss of many parts of available freshwater input by precipitation. When considering water footprint inventory, the dominance of land use is less than that of water consumption. However, the effect of land use is relevant to the assessment of water footprint impact by differentiating stress on water resources. The exclusion of land use effect underestimates the water footprint of goods produced in Japan by an average of around 37%.

  9. Reflexões sobre a articulação entre o homo faber e o homo sapiens na enfermagem

    Directory of Open Access Journals (Sweden)

    Cecilia Nogueira Valenca

    2013-09-01

    Full Text Available Estudo reflexivo com o objetivo de analisar a articulação entre o enfermeiro-docente (Homo sapiens e o enfermeiro-assistencial (Homo faber no ambiente hospitalar, à luz do pensamento gramsciano. Na Enfermagem, coexistem duas dimensões: a teórica, exemplificada na figura do enfermeiro docente com seus projetos de pesquisa e publicações científicas; e a dimensão prática, com a atuação técnico-assistencial. Evidencia-se o distanciamento do enfermeiro docente em relação aos cenários de prática da graduação, assim como do enfermeiro assistencial, da pesquisa e da prática baseada em evidências científicas. Face ao dilema entre Homo faber e Homo sapiens na Enfermagem, emerge a importância de refletir sobre a dimensão ética subjacente às ações de ambos, centradas no ser humano. Este diálogo não pode ser ignorado, pois dele depende o desbravamento de novos horizontes e o crescimento da Enfermagem enquanto ciência e prática social.

  10. Regulatory elements of the floral homeotic gene AGAMOUS identified by phylogenetic footprinting and shadowing.

    Energy Technology Data Exchange (ETDEWEB)

    Hong, R. L., Hamaguchi, L., Busch, M. A., and Weigel, D.

    2003-06-01

    OAK-B135 In Arabidopsis thaliana, cis-regulatory sequences of the floral homeotic gene AGAMOUS (AG) are located in the second intron. This 3 kb intron contains binding sites for two direct activators of AG, LEAFY (LFY) and WUSCHEL (WUS), along with other putative regulatory elements. We have used phylogenetic footprinting and the related technique of phylogenetic shadowing to identify putative cis-regulatory elements in this intron. Among 29 Brassicaceae, several other motifs, but not the LFY and WUS binding sites previously identified, are largely invariant. Using reporter gene analyses, we tested six of these motifs and found that they are all functionally important for activity of AG regulatory sequences in A. thaliana. Although there is little obvious sequence similarity outside the Brassicaceae, the intron from cucumber AG has at least partial activity in A. thaliana. Our studies underscore the value of the comparative approach as a tool that complements gene-by-gene promoter dissection, but also highlight that sequence-based studies alone are insufficient for a complete identification of cis-regulatory sites.

  11. Field-based experimental water footprint study of sunflower growth in a semi-arid region of China.

    Science.gov (United States)

    Qin, Lijie; Jin, Yinghua; Duan, Peili; He, Hongshi

    2016-07-01

    Field-scale changes in the water footprint during crop growth play an important role in formulating sustainable water utilisation strategies. This study aimed to explore field-scale variation in the water footprint of growing sunflowers in the western Jilin Province, China, during a 3-year field experiment. The goals of this study were to (1) determine the components of the 'blue' and 'green' water footprints for sunflowers sown with water, and (2) analyse variations in water footprints and soil water balance under different combinations of temperature and precipitation. Specific actions could be adopted to maintain sustainable agricultural water utilisation in the semi-arid region based on this study. The green, blue, and grey water footprints accounted for 93.7-94.7%, 0.4-0.5%, and 4.9-5.8%, respectively, of the water footprint of growing sunflowers. The green water footprint for effective precipitation during the growing season accounted for 58.8% in a normal drought year but 48.2% in an extreme drought year. When the effective precipitation during the growing season could not meet the green water use, a moisture deficit arose. This increase in the moisture deficit can have a significant impact on soil water balance. Green water was the primary water source for sunflower growth in the study area, where a scarcity of irrigation water during sunflower growth damaged the soil water balance, particularly in years with continuous drought. The combination of temperature and precipitation effected the growing environment, leading to differences in yield and water footprint. The field experiments in this area may benefit from further water footprint studies at the global, national and regional scale. © 2016 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. © 2016 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of

  12. Water neutral: reducing and ofsetting water footprints

    NARCIS (Netherlands)

    Hoekstra, Arjen Ysbert

    2008-01-01

    During the past few years the concept of the ‘water footprint’ has started to receive recognition within governments, non-governmental organizations, businesses and media as a useful indicator of water use. The increased interest in the water-footprint concept has prompted the question about what

  13. Spatially and temporally explicit water footprint accounting

    NARCIS (Netherlands)

    Mekonnen, Mesfin

    2011-01-01

    The earth’s freshwater resources are subject to increasing pressure in the form of consumptive water use and pollution (Postel, 2000; WWAP, 2003, 2006, 2009). Quantitative assessment of the green, blue and grey water footprint of global production and consumption can be regarded as a key in

  14. The water footprint of biofuel-based transport

    NARCIS (Netherlands)

    Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

    2011-01-01

    The EU target to replace 10 percent of transport fuels by renewables by 2020 requires additional water. This study calculates water footprints (WFs) of transport modes using first generation bio-ethanol, biodiesel or bio-electricity and of European transport if 10 percent of transport fuels is

  15. SLAC site design aesthetics

    International Nuclear Information System (INIS)

    Hall, F.F.

    1985-10-01

    Stanford Linear Accelerator Center (SLAC) is a single mission laboratory dedicated to basic research in high energy particle physics. SLAC site also houses Stanford Synchrotron Radiation Laboratory (SSRL) which is a multi-mission laboratory for research using beams of ultraviolet light and low energy photons as emitted tangentially from SLAC colliding beam facilities. This paper discusses various aspects of SLAC site design aesthetics under the following headings: (1) imposed footprint of SLAC, (2) description of selected site, (3) use of earth cover for radiation and sight screens, (4) use of landscaping for cosmetic purposes, (5) use of exterior paint colors to soften SLAC impact on neighbors, (6) relocation of SLAC main entrance, (7) relocation of SLAC collider arcs and experimental hall, (8) parking lots and storage yards, and (9) land use zoning at SLAC

  16. The pectoralis major footprint: An anatomical study

    Directory of Open Access Journals (Sweden)

    Eduardo Antonio de Figueired

    2013-12-01

    Full Text Available Objective: To study the insertion of the pectoralis major tendon to the humerus, through knowledge of its dimensions in the coronal and sagittal planes. Methods: Twenty shoulders from 10 cadavers were dissected and the pectoralis major tendon insertion on the humerus was identified and isolated. The dimensions of its "footprint" (proximal to distal and medial to lateral borders and the distance from the top edge of the pectoralis major tendon to apex of the humeral head structures were measured. Results: The average proximal to distal border length was 80.8 mm (range: 70 -90 and the medial-to-lateral border length was 6.1 mm (5 -7. The average distance (and range from the apex of the pectoralis major tendon to the humeral head was 59.3 mm. Conclusions: We demonstrate that the insertion of the pectoralis major tendon is laminar, and the pectoralis major tendon has an average footprint height and width of 80.8 mm and 6.1 mm, respectively.

  17. Estimation of Crop Gross Primary Production (GPP): I. Impact of MODIS Observation Footprint and Impact of Vegetation BRDF Characteristics

    Science.gov (United States)

    Zhang, Qingyuan; Cheng, Yen-Ben; Lyapustin, Alexei I.; Wang, Yujie; Xiao, Xiangming; Suyker, Andrew; Verma, Shashi; Tan, Bin; Middleton, Elizabeth M.

    2014-01-01

    Accurate estimation of gross primary production (GPP) is essential for carbon cycle and climate change studies. Three AmeriFlux crop sites of maize and soybean were selected for this study. Two of the sites were irrigated and the other one was rainfed. The normalized difference vegetation index (NDVI), the enhanced vegetation index (EVI), the green band chlorophyll index (CIgreen), and the green band wide dynamic range vegetation index (WDRVIgreen) were computed from the moderate resolution imaging spectroradiometer (MODIS) surface reflectance data. We examined the impacts of the MODIS observation footprint and the vegetation bidirectional reflectance distribution function (BRDF) on crop daily GPP estimation with the four spectral vegetation indices (VIs - NDVI, EVI, WDRVIgreen and CIgreen) where GPP was predicted with two linear models, with and without offset: GPP = a × VI × PAR and GPP = a × VI × PAR + b. Model performance was evaluated with coefficient of determination (R2), root mean square error (RMSE), and coefficient of variation (CV). The MODIS data were filtered into four categories and four experiments were conducted to assess the impacts. The first experiment included all observations. The second experiment only included observations with view zenith angle (VZA) = 35? to constrain growth of the footprint size,which achieved a better grid cell match with the agricultural fields. The third experiment included only forward scatter observations with VZA = 35?. The fourth experiment included only backscatter observations with VZA = 35?. Overall, the EVI yielded the most consistently strong relationships to daily GPP under all examined conditions. The model GPP = a × VI × PAR + b had better performance than the model GPP = a × VI × PAR, and the offset was significant for most cases. Better performance was obtained for the irrigated field than its counterpart rainfed field. Comparison of experiment 2 vs. experiment 1 was used to examine the observation

  18. Human talus bones from the Middle Pleistocene site of Sima de los Huesos (Sierra de Atapuerca, Burgos, Spain).

    Science.gov (United States)

    Pablos, Adrián; Martínez, Ignacio; Lorenzo, Carlos; Gracia, Ana; Sala, Nohemi; Arsuaga, Juan Luis

    2013-07-01

    Here we present and describe comparatively 25 talus bones from the Middle Pleistocene site of the Sima de los Huesos (SH) (Sierra de Atapuerca, Burgos, Spain). These tali belong to 14 individuals (11 adult and three immature). Although variation among Middle and Late Pleistocene tali tends to be subtle, this study has identified unique morphological characteristics of the SH tali. They are vertically shorter than those of Late Pleistocene Homo sapiens, and show a shorter head and a broader lateral malleolar facet than all of the samples. Moreover, a few shared characters with Neanderthals are consistent with the hypothesis that the SH population and Neanderthals are sister groups. These shared characters are a broad lateral malleolar facet, a trochlear height intermediate between modern humans and Late Pleistocene H. sapiens, and a short middle calcaneal facet. It has been possible to propose sex assignment for the SH tali based on their size. Stature estimates based on these fossils give a mean stature of 174.4 cm for males and 161.9 cm for females, similar to that obtained based on the long bones from this same site. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Urban planning and industry in Spain: A novel methodology for calculating industrial carbon footprints

    International Nuclear Information System (INIS)

    Zubelzu, Sergio; Álvarez, Roberto

    2015-01-01

    In this paper we present a methodology for calculating the carbon footprint of the industrial sector during the urban planning stage in order to clearly develop and implement preventive measures. The methodology created focuses on industrial urban planning procedures and takes into account urban infrastructure in the characterization of GHG emissions. It allows for the implementation of preventive measures based on sustainability design criteria. The methodology was derived for specific industrial activity categories and was tested on a group of municipalities in a province south of Madrid, Spain. The results indicate that the average carbon footprint of industrial activities varies between 137.36 kgCO 2eq /m 2 e and 607.25 kgCO 2eq /m 2 e depending on the activity. Gas and electricity are the most important emissions sources for the most polluting industrial activities (chemical and nonmetal mineral products), while transportation is the most important source for every other activity. Municipalities can have a decisive influence on the industrial carbon footprint because, except for waste management and two industrial activities related to electricity, the majority of reductions can be achieved through urban planning decision variables. -- Highlights: •Model to calculate industrial carbon footprint in urban planning stage is proposed. •Specific industrial activities planned have a strong effect on carbon footprint. •Gas and electricity are the most relevant sources for the most pollutant industries. •Transport is relevant source for the less pollutant industries. •Municipalities can decisively influence on industrial carbon footprint

  20. Water Footprints and ‘Pozas’: Conversations about Practices and Knowledges of Water Efficiency

    Directory of Open Access Journals (Sweden)

    Carolina Domínguez Guzmán

    2017-01-01

    Full Text Available In this article we present two logics of water efficiency: that of the Water Footprint and that of mango smallholder farmers on the desert coast of Peru (in Motupe. We do so in order to explore how both can learn from each other and to discuss what happens when the two logics meet. Rather than treating the Water Footprint as scientific, in the sense that it is separate from traditions or politics, and Motupe poza irrigation as cultural and, therefore, thick with local beliefs and superstitions, we describe both as consisting of intricate entanglements of knowledge and culture. This produces a more or less level playing field for the two water logics to meet and for proponents of each to enter into a conversation with one another; allowing furthermore for the identification of what Water Footprint inventors and promotors can learn from poza irrigators, and vice versa. The article concludes that important water wisdom may get lost when the Water Footprint logic becomes dominant, as is currently about to happen in Peru.

  1. Phylogenetic footprints in organizational behavior

    OpenAIRE

    Witt, Ulrich; Schwesinger, Georg

    2012-01-01

    An evolutionary tool kit is applied in this paper to explain how innate social behavior traits evolved in early human groups. These traits were adapted to the particular production requirements of the group in human phylogeny. They shaped the group members' attitudes towards contributing to the group's goals and towards other group members. We argue that these attitudes are still present in modern humans and leave their phylogenetic footprints also in present-day organizational life. We discu...

  2. Molecular biology of Homo sapiens: Abstracts of papers presented at the 51st Cold Spring Harbor symposium on quantitative biology

    International Nuclear Information System (INIS)

    Watson, J.D.; Siniscalco, M.

    1986-01-01

    This volume contains abstracts of papers presented at the 51st Cold Springs Harbor Symposium on Quantitative Biology. The topic for this meeting was the ''Molecular Biology of Homo sapiens.'' Sessions were entitled Human Gene Map, Human Cancer Genes, Genetic Diagnosis, Human Evolution, Drugs Made Off Human Genes, Receptors, and Gene Therapy. (DT)

  3. Carbon Footprint Analysis of Municipalities – Evidence from Greece

    Directory of Open Access Journals (Sweden)

    K. Angelakoglou

    2015-11-01

    Full Text Available The economical crisis that hit Greece after 2009, significantly affected its energy consumption profile due to the increased price of domestic heating oil and gasoline. The specific study aims at the quantification of the carbon dioxide emissions in municipal level due to energy and fuel consumption. Three different municipalities in North Greece (Kavala, Alexandroupolis and Drama were assessed with the application of three different carbon footprint estimation approaches in each one of them, including two life cycle assessment methods. Results ranged from 511,799 to 571,000, 435,250 to 489,000 and 355,207 to 398,000 tons CO2 and tons CO2-eq. for Kavala, Alexandroupolis and Drama respectively. The analysis per energy type indicated the electrical energy consumption as the key factor affecting the results due to the relatively high CO2 emission coefficient of the electricity produced in Greece. The analysis per sector indicated that a percentage of nearly 75% of the total carbon footprint is assigned to the building sector whereas the private and commercial transport is accountable for the rest. Municipal activities (buildings, facilities, lighting and fleet contributed to a small percentage to the total carbon footprint (approx. 3-8%.

  4. Nanoscale footprints of self-running gallium droplets on GaAs surface.

    Directory of Open Access Journals (Sweden)

    Jiang Wu

    Full Text Available In this work, the nanoscale footprints of self-driven liquid gallium droplet movement on a GaAs (001 surface will be presented and analyzed. The nanoscale footprints of a primary droplet trail and ordered secondary droplets along primary droplet trails are observed on the GaAs surface. A well ordered nanoterrace from the trail is left behind by a running droplet. In addition, collision events between two running droplets are investigated. The exposed fresh surface after a collision demonstrates a superior evaporation property. Based on the observation of droplet evolution at different stages as well as nanoscale footprints, a schematic diagram of droplet evolution is outlined in an attempt to understand the phenomenon of stick-slip droplet motion on the GaAs surface. The present study adds another piece of work to obtain the physical picture of a stick-slip self-driven mechanism in nanoscale, bridging nano and micro systems.

  5. Decreasing Magmatic Footprints of Individual Volcanos in a Waning Basaltic Field

    Energy Technology Data Exchange (ETDEWEB)

    G.A> Valentine; F.V. Perry

    2006-06-06

    The distribution and characteristics of individual basaltic volcanoes in the waning Southwestern Nevada Volcanic Field provide insight into the changing physical nature of magmatism and the controls on volcano location. During Pliocene-Pleistocene times the volumes of individual volcanoes have decreased by more than one order of magnitude, as have fissure lengths and inferred lava effusion rates. Eruptions evolved from Hawaiian-style eruptions with extensive lavas to eruptions characterized by small pulses of lava and Strombolian to violent Strombolian mechanisms. These trends indicate progressively decreasing partial melting and length scales, or magmatic footprints, of mantle source zones for individual volcanoes. The location of each volcano is determined by the location of its magmatic footprint at depth, and only by shallow structural and topographic features that are within that footprint. The locations of future volcanoes in a waning system are less likely to be determined by large-scale topography or structures than were older, larger volume volcanoes.

  6. Footprints of alien technology

    Science.gov (United States)

    Davies, P. C. W.

    2012-04-01

    If alien civilizations do, or did, exist, their technology will impact their environment. Some consideration has been given to the detection of large-scale astro-engineering, such as Dyson spheres. However, a very advanced technology might leave more subtle footprints requiring sophisticated scientific methods to uncover. We must not overlook the possibility that alien technology has impacted our immediate astronomical environment, even Earth itself, but probably a very long time ago. This raises the question of what traces, if anything, might remain today. I shall consider the possibilities of biological, geological and physical traces, and suggest ways that we might search for them.

  7. Diazo Reagents with Small Steric Footprints for Simultaneous Arming/SAR Studies of Alcohol-Containing Natural Products via O–H Insertion

    Science.gov (United States)

    Chamni, Supakarn; He, Qing-Li; Dang, Yongjun; Bhat, Shridhar; Liu, Jun O.; Romo, Daniel

    2011-01-01

    Natural products are essential tools for basic cellular studies leading to the identification of medically relevant protein targets and the discovery of potential therapeutic leads. The development of methods that enable mild and selective derivatization of natural products continues to be of significant interest for mining their information-rich content. Herein, we describe novel diazo reagents for simultaneous arming and structure-activity relationship (SAR) studies of alcohol-containing natural products with a small steric footprint, namely an α-trifluoroethyl (HTFB) substituted reagent. The Rh(II)-catalyzed O–H insertion reaction of several natural products, including the potent translation inhibitor lactimidomycin, was investigated and useful reactivity and both chemo- and site (chemosite) selectivities were observed. Differential binding to the known protein targets of both FK506 and fumagillol was demonstrated, validating the advantage of the smaller steric footprint of trifluoroethyl derivatives. A p-azidophenyl diazo reagent is also described that will prove useful for photoaffinity labeling of low affinity small molecule protein receptors. PMID:21894934

  8. European Water Footprint Scenarios for 2050

    Directory of Open Access Journals (Sweden)

    A. Ertug Ercin

    2016-05-01

    Full Text Available This study develops water footprint scenarios for Europe for 2050, at the country level, based on projections regarding population and economic growth, production and trade patterns, consumption patterns (diets and bioenergy use and technological development. The objective is to estimate possible future changes in the green, blue and grey water footprint (WF of production and consumption, to analyze the main drivers of projected changes and to assess Europe’s future dependence on water resources elsewhere in the world. We develop four scenarios, considering globalization versus regional self-sufficiency, and development driven by economic objectives versus development driven by social and environmental objectives. The study shows that the most critical driver of change affecting Europe’s future WF is the consumption pattern. The WFs of both production and consumption in Western Europe increase under scenarios with high meat consumption and decrease with low-meat scenarios. Besides, additional water demands from increasing biofuel needs will put further pressure on European water resources. The European countries with a large ratio of external to total WF of consumption in 2000 decrease their dependencies on foreign water resources in 2050.

  9. Water Footprint and Virtual Water Trade of Brazil

    Directory of Open Access Journals (Sweden)

    Vicente de Paulo R. da Silva

    2016-11-01

    Full Text Available Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international trade in the main agricultural commodities, as well as water scarcity, water self-sufficiency and water dependency per Brazilian region. While previous country studies on water footprints and virtual water trade focused on virtual water importers or water-scarce countries, this is the first study to concentrate on a water-abundant virtual water-exporting country. Besides, it is the first study establishing international virtual water trade balances per state, which is relevant given the fact that water scarcity varies across states within the country, so the origin of virtual water exports matters. The results show that the average water footprint of Brazilian food consumption is 1619 m3/person/year. Beef contributes most (21% to this total. We find a net virtual water export of 54.8 billion m3/year, mainly to Europe, which imports 41% of the gross amount of the virtual water exported from Brazil. The northeast, the region with the highest water scarcity, has a net import of virtual water. The southeast, next in terms of water scarcity, shows large virtual water exports, mainly related to the export of sugar. The north, which has the most water, does not show a high virtual water export rate.

  10. Research developments in methods to reduce the carbon footprint of the food system: a review.

    Science.gov (United States)

    Xu, Zhongyue; Sun, Da-Wen; Zeng, Xin-An; Liu, Dan; Pu, Hongbin

    2015-01-01

    Global warming is a worldwide issue with its evident impact across a wide range of systems and sectors. It is caused by a number of greenhouse gases (GHGs) emissions, in which food system has made up of a large part. Recently, reduction of GHG emissions has become an urgent issue to be resolved in the food system. Many governments and organizations are making great endeavors to alleviate the adverse effect of this phenomenon. In this review, methods to reduce the carbon footprint within the life cycle of a food system are presented from the technical, consumption behavior and environmental policies perspectives. The whole food system including raw material acquisition, processing, packaging, preservation, transportation, consumption, and disposal are covered. Improving management techniques, and adopting advanced technology and equipment are critical for every stage of a food system. Rational site selection is important to alleviate the influence of land use change. In addition, environmental choices of packaging stage, reduction in refrigeration dependence, and correct waste treatment are essential to reduce the total carbon footprint of the production. However, only technical methods cannot radically reverse the trend of climate change, as consumption behaviors present a great deal of influence over climate change. Appropriate purchase patterns and substitution within food product categories by low carbon products can reduce GHG emissions. Development of methods to calculate the carbon footprint of every kind of food and its processing technology enable people to make environmental choice. Policy can shape and cultivate the new code of consumption and influence the direction of emerging technology and science. From political perspectives, government intervention and carbon offset are common tools, especially for carbon tax and a real or implicit price of carbon. Finally, by mitigating the methodologies described above, the rate and magnitude of climate changes

  11. CONREAL web server: identification and visualization of conserved transcription factor binding sites

    NARCIS (Netherlands)

    Berezikov, E.; Guryev, V.; Cuppen, E.

    2005-01-01

    The use of orthologous sequences and phylogenetic footprinting approaches have become popular for the recognition of conserved and potentially functional sequences. Several algorithms have been developed for the identification of conserved transcription factor binding sites (TFBSs), which are

  12. Protamines and spermatogenesis in Drosophila and Homo sapiens : A comparative analysis.

    Science.gov (United States)

    Kanippayoor, Rachelle L; Alpern, Joshua H M; Moehring, Amanda J

    2013-04-01

    The production of mature and motile sperm is a detailed process that utilizes many molecular players to ensure the faithful execution of spermatogenesis. In most species that have been examined, spermatogenesis begins with a single cell that undergoes dramatic transformation, culminating with the hypercompaction of DNA into the sperm head by replacing histones with protamines. Precise execution of the stages of spermatogenesis results in the production of motile sperm. While comparative analyses have been used to identify similarities and differences in spermatogenesis between species, the focus has primarily been on vertebrate spermatogenesis, particularly mammals. To understand the evolutionary basis of spermatogenetic variation, however, a more comprehensive comparison is needed. In this review, we examine spermatogenesis and the final packaging of DNA into the sperm head in the insect Drosophila melanogaster and compare it to spermatogenesis in Homo sapiens.

  13. Single-footprint retrievals of temperature, water vapor and cloud properties from AIRS

    Science.gov (United States)

    Irion, Fredrick W.; Kahn, Brian H.; Schreier, Mathias M.; Fetzer, Eric J.; Fishbein, Evan; Fu, Dejian; Kalmus, Peter; Wilson, R. Chris; Wong, Sun; Yue, Qing

    2018-02-01

    Single-footprint Atmospheric Infrared Sounder spectra are used in an optimal estimation-based algorithm (AIRS-OE) for simultaneous retrieval of atmospheric temperature, water vapor, surface temperature, cloud-top temperature, effective cloud optical depth and effective cloud particle radius. In a departure from currently operational AIRS retrievals (AIRS V6), cloud scattering and absorption are in the radiative transfer forward model and AIRS single-footprint thermal infrared data are used directly rather than cloud-cleared spectra (which are calculated using nine adjacent AIRS infrared footprints). Coincident MODIS cloud data are used for cloud a priori data. Using single-footprint spectra improves the horizontal resolution of the AIRS retrieval from ˜ 45 to ˜ 13.5 km at nadir, but as microwave data are not used, the retrieval is not made at altitudes below thick clouds. An outline of the AIRS-OE retrieval procedure and information content analysis is presented. Initial comparisons of AIRS-OE to AIRS V6 results show increased horizontal detail in the water vapor and relative humidity fields in the free troposphere above the clouds. Initial comparisons of temperature, water vapor and relative humidity profiles with coincident radiosondes show good agreement. Future improvements to the retrieval algorithm, and to the forward model in particular, are discussed.

  14. Emerging product carbon footprint standards and schemes and their possible trade impacts

    DEFF Research Database (Denmark)

    Bolwig, Simon; Gibbon, Peter

    footprints or procedures for certification or labelling. Nonetheless, to date only a few thousand products have been footprinted. As PCFs are already becoming market access requirements for bio-fuels imported to the EU, and may also become EU market access requirements for all mass-produced goods within 10......Concern over climate change has stimulated interest in estimating the total amount of greenhouse gasses produced during the life-cycle of goods and services - i.e. during their production, transportation, sale, use and disposal. The outcome of these calculations is referred to as "product carbon...... footprints" (PCFs). The paper reviews the rationale, context, coverage and characteristics of emerging standards and certification schemes that estimate and designate PCFs, and discusses the possible impacts on trade, particularly exports from distant and developing countries. It draws on a survey of PCF...

  15. A Footprint Family extended MRIO model to support Europe's transition to a One Planet Economy.

    Science.gov (United States)

    Galli, Alessandro; Weinzettel, Jan; Cranston, Gemma; Ercin, Ertug

    2013-09-01

    Currently, the European economy is using nearly three times the ecological assets that are locally available. This situation cannot be sustained indefinitely. Tools are needed that can help reverse the unsustainable trend. In 2010, an EC funded One Planet Economy Network: Europe (OPEN:EU) project was launched to develop the evidence and innovative practical tools that will allow policy-makers and civil society to identify policy interventions to transform Europe into a One Planet Economy, by 2050. Building on the premise that no indicator alone is able to comprehensively monitor (progress towards) sustainability, the project has drawn on the Ecological, Carbon and Water Footprints to define a Footprint Family suite of indicators, to track human pressure on the planet. An environmentally-extended multi-regional input-output (MRIO) model has then been developed to group the Footprint Family under a common framework and combine the indicators in the family with national economic accounts and trade statistics. Although unable to monitor the full spectrum of human pressures, once grouped within the MRIO model, the Footprint Family is able to assess the appropriation of ecological assets, GHG emissions as well as freshwater consumption and pollution associated with consumption of specific products and services within a specified country. Using MRIO models within the context of Footprint analyses also enables the Footprint Family to take into account full production chains with technologies specific to country of origin. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. Evaluation of Agricultural Crops Water Footprint with Application of Climate Change in Urmia Lake basin

    Directory of Open Access Journals (Sweden)

    majid montaseri

    2017-02-01

    Full Text Available Introduction: The water footprint index as a complete indicator represents the actual used water in agriculture based on the climate condition, the amount of crop production, the people consumption pattern, the agriculture practices and water efficiency in any region. The water footprint in agricultural products is divided to three components, including green, blue and gray water footprint. Green water footprint is rainwater stored in soil profile and on vegetation. Blue water refers to water in rivers, lakes and aquifers which is used for irrigation purposes. Gray water footprint refers to define as the volume of contaminated water. The water footprint in arid and semiarid regions with high water requirement for plants and limited fresh water resources has considerable importance and key role in the planning and utilization of limited water resources in these regions. On the other hand, increasing the temperature and decreasing the rainfall due to climate change, are two agents which affect arid and semiarid regions. Therefore, in this research the water footprint of agriculturalcrop production in Urmia Lake basin, with application of climate change for planning, stable operating and crop pattern optimizing, was evaluated to reduce agricultural water consumption and help supplying water rights of Urmia Lake. Materials and Methods:Urmia Lake basin, as one of the main sextet basins in Iran, is located in the North West of Iran and includes large sections of West Azerbaijan, East Azerbaijan and Kurdistan areas. Thirteen major rivers are responsible to drain surface streams in Urmia Lake basin and these rivers after supplying agriculture and drinking water and residential areas in the flow path, are evacuated to the Lake. Today because of non-observance of sustainable development concept, increasing water use in different parts and climate change phenomena in Urmia Lake basin the hydrologic balance was perturbed, and Urmia Lake has been lost 90% of

  17. Interactive effects of carbon footprint information and its accessibility on value and subjective qualities of food products.

    Science.gov (United States)

    Kimura, Atsushi; Wada, Yuji; Kamada, Akiko; Masuda, Tomohiro; Okamoto, Masako; Goto, Sho-ichi; Tsuzuki, Daisuke; Cai, Dongsheng; Oka, Takashi; Dan, Ippeita

    2010-10-01

    We aimed to explore the interactive effects of the accessibility of information and the degree of carbon footprint score on consumers' value judgments of food products. Participants (n=151, undergraduate students in Japan) rated their maximum willingness to pay (WTP) for four food products varying in information accessibility (active-search or read-only conditions) and in carbon footprint values (low, middle, high, or non-display) provided. We also assessed further effects of information accessibly and carbon footprint value on other product attributes utilizing the subjective estimation of taste, quality, healthiness, and environmental friendliness. Results of the experiment demonstrated an interactive effect of information accessibility and the degree of carbon emission on consumer valuation of carbon footprint-labeled food. The carbon footprint value had a stronger impact on participants' WTP in the active-search condition than in the read-only condition. Similar to WTP, the results of the subjective ratings for product qualities also exhibited an interactive effect of the two factors on the rating of environmental friendliness for products. These results imply that the perceived environmental friendliness inferable from a carbon footprint label contributes to creating value for a food product.

  18. Effects of Globalisation on Carbon Footprints of Products

    DEFF Research Database (Denmark)

    Herrmann, Ivan Tengbjerg; Hauschild, Michael Zwicky

    2009-01-01

    Outsourcing of production from the industrialised countries to the newly industrialised economies holds the potential to increase wealth in both places, but what are the environmental costs of the globalised manufacturing systems? This paper looks into the changes in carbon footprint...

  19. galstreams: Milky Way streams footprint library and toolkit

    Science.gov (United States)

    Mateu, Cecilia

    2017-11-01

    galstreams provides a compilation of spatial information for known stellar streams and overdensities in the Milky Way and includes Python tools for visualizing them. ASCII tables are also provided for quick viewing of the stream's footprints using TOPCAT (ascl:1101.010).

  20. relationship between climatic variability and water footprint of ...

    African Journals Online (AJOL)

    Global Journal

    Blue water footprint (WFblue) value calculated as 172/m2/ton was found to be higher ... There are earth system interactions of atmosphere ... warmer earth, rising from the fact that global .... of soil is structurally sticky, with colours between dark.

  1. Natural cycles and agricultural inputs: a farm gate Ecological Footprint analysis

    Science.gov (United States)

    Passeri, Nicolo; Blasi, Emanuele; Borucke, Michael; Galli, Alessandro; Franco, Silvio

    2014-05-01

    Land suitability for different crops depends on soil, water and climate conditions, as well as farmers' cultivation choices. Moreover, the use of agricultural inputs affects the natural cycles of crops and impacts their production. By assessing the ecological performance of farms as influenced by crop types, cultivation choices and land suitability one can therefore evaluate the effectiveness of agricultural practices and governance's options. Ecological Footprint accounts can be used to measure such ecological performance. These accounts track human demand for natural resources and ecological services and compare this demand with nature ability to regenerate these resource and services. This regenerative capacity is called biocapacity. Both demand (Footprint) and supply (biocapacity) are expressed in global hectares. Farming different from most other human activities, not only uses natural resources, but also enhances or erodes ecological supply. It therefore affects all factors that determine both Footprint and biocapacity. Climate, farmers' skills and choices (fertilizers, pesticides, machines) determine crop productivity, and to what extent crops preserve or compromise soils. The aim of this work is to evaluate how farmer's choices affect resources overexploitation. The study analysed how the use of inputs influences natural cycles within farm boundaries. This result from a pilot case study will show how particular farming practices affect both the farm's biocapacity and Ecological Footprint. Such analysis is relevant for informing involved stakeholders, namely the farmers on more sustainable agricultural practices and the policy makers on more suitable agricultural policies.

  2. Chemical Footprint Method for Improved Communication of Freshwater Ecotoxicity Impacts in the Context of Ecological Limits

    DEFF Research Database (Denmark)

    Bjørn, Anders; Diamond, Miriam; Birkved, Morten

    2014-01-01

    The ecological footprint method has been successful in communicating environmental impacts of anthropogenic activities in the context of ecological limits. We introduce a chemical footprint method that expresses ecotoxicity impacts from anthropogenic chemical emissions as the dilution needed...... to avoid freshwater ecosystem damage. The indicator is based on USEtox characterization factors with a modified toxicity reference point. Chemical footprint results can be compared to the actual dilution capacity within the geographic vicinity receiving the emissions to estimate whether its ecological...... limit has been exceeded and hence whether emissions can be expected to be environmentally sustainable. The footprint method was illustrated using two case studies. The first was all inventoried emissions from European countries and selected metropolitan areas in 2004, which indicated that the dilution...

  3. Molecular biology of Homo sapiens: Abstracts of papers presented at the 51st Cold Spring Harbor symposium on quantitative biology

    Energy Technology Data Exchange (ETDEWEB)

    Watson, J.D.; Siniscalco, M.

    1986-01-01

    This volume contains abstracts of papers presented at the 51st Cold Springs Harbor Symposium on Quantitative Biology. The topic for this meeting was the ''Molecular Biology of Homo sapiens.'' Sessions were entitled Human Gene Map, Human Cancer Genes, Genetic Diagnosis, Human Evolution, Drugs Made Off Human Genes, Receptors, and Gene Therapy. (DT)

  4. Anatomical Footprint of the Tibialis Anterior Tendon: Surgical Implications for Foot and Ankle Reconstructions

    Directory of Open Access Journals (Sweden)

    Madeleine Willegger

    2017-01-01

    Full Text Available This study aimed to analyze precisely the dimensions, shapes, and variations of the insertional footprints of the tibialis anterior tendon (TAT at the medial cuneiform (MC and first metatarsal (MT1 base. Forty-one formalin-fixed human cadaveric specimens were dissected. After preparation of the TAT footprint, standardized photographs were made and the following parameters were evaluated: the footprint length, width, area of insertion, dorsoplantar location, shape, and additional tendon slips. Twenty feet (48.8% showed an equal insertion at the MC and MT1, another 20 feet (48.8% had a wide insertion at the MC and a narrow insertion at the MT1, and 1 foot (2.4% demonstrated a narrow insertion at the MC and a wide insertion at the MT1. Additional tendon slips inserting at the metatarsal shaft were found in two feet (4.8%. Regarding the dorsoplantar orientation, the footprints were located medial in 29 feet (70.7% and medioplantar in 12 feet (29.3%. The most common shape at the MT1 base was the crescent type (75.6% and the oval type at the MC (58.5%. The present study provided more detailed data on the dimensions and morphologic types of the tibialis anterior tendon footprint. The established anatomical data may allow for a safer surgical preparation and a more anatomical reconstruction.

  5. Product carbon footprint assessment supporting the green supply chain construction in household appliance manufacturers

    Science.gov (United States)

    Chen, Jianhua; Sun, Liang; Guo, Huiting

    2017-11-01

    Supply chain carbon emission is one of the factors considered in the green supply chain management. A method was designed to support the green supply chain measures based on the carbon footprint assessment for products. A research for 3 typical household appliances carbon footprint assessment was conducted to explore using product carbon footprint assessment method to guide the green supply chain management of the manufacturers. The result could reflect the differences directions on green supply chain management of manufacturers of washing machine, air conditioner and microwave, respectively That is, the washing machine manufacturer should pay attention to the low carbon activities in upstream suppliers in highest priority, and also the promotion of product energy efficiency. The air conditioner manufacturer should pay attention to the product energy efficiency increasing in highest priority, and the improvement of refrigerant to decrease its GWP. And the microwave manufacture could only focus on the energy efficiency increasing because it contributes most of the carbon emission to its carbon footprint. Besides, the representativeness of product and the applicability of the method were also discussed. As the manufacturer could master the technical information on raw material and components of its products to conduct the product carbon footprint assessment, this method could help the manufacturer to identify the effective green supply chain measures in the preliminary stage.

  6. High sensitivity of metal footprint to national GDP in part explained by capital formation

    Science.gov (United States)

    Zheng, Xinzhu; Wang, Ranran; Wood, Richard; Wang, Can; Hertwich, Edgar G.

    2018-04-01

    Global metal ore extraction tripled between 1970 and 2010 as metals are widely used in new infrastructure and advanced technology. Meanwhile, the energy and environmental costs of metal mining increase as lower ore grades are being exploited. The domestic use of metals has been found to reach a plateau when gross domestic product reaches US15,000 per person. Here we present a quantification of the annual metal footprint (that is, the amount of metal ore extracted to satisfy the final demand of a country, including metals used abroad to produce goods that are then imported, and excluding metals used domestically to produce exports) for 43 large economies during 1995-2013. We use a panel analysis to assess short-term drivers of changes in metal footprint, and find that a 1% rise in gross domestic product raises the metal footprint by as much as 1.9% in the same year. Further, every percentage point increase in gross capital formation as a share of gross domestic product increased the metal footprint by 2% when controlling for gross domestic product. Other socioeconomic variables did not significantly influence the metal footprint. Finding ways to break the strong coupling of economic development and investment with metal ore extraction may be required to ensure resource access and a low-carbon future.

  7. Carbon footprints and legitimation strategies: Symbolism or action?

    Energy Technology Data Exchange (ETDEWEB)

    Hrasky, S. [Univ. of Tasmania (Australia)

    2009-07-01

    The term 'carbon footprint' is now firmly entrenched in the common vernacular where it tends to function ideographically, representing a range of concerns about environmental impacts and degradation. Political and consumer concern about the related issues of carbon emissions, climate change and global warming has been heightened by a number of factors. It is often claimed that, along with the US, Australia has one of the heaviest carbon footprints. However, according to KPMG's (2008) survey results only 32 per cent of the Australian companies included in its survey report specifically on their carbon footprints. Nonetheless, KPMG (2007) reports that around 85 per cent of the 500 largest listed Australian companies do report on the related issues of climate change and greenhouse gas emissions. Motivations for making such disclosures can vary widely but legitimacy theory has been used extensively to explain environmental disclosure decisions in the context of maintaining an implicit social contract between the company and its stakeholders. While, prima facie, increased levels of voluntary disclosures may be a constructive outcome there is the associated risk that, in pursuit of legitimation, such disclosure can actually 'thicken' the corporate veil. This can occur because organizational action to maintain the social contact can be both symbolic and behavioral. That is, the disclosure response might be calculated to create a positive impression of the firm's activities with no associated change in operations (symbolism) or it might convey a message about how operational changes have been effected that are more consistent with societal expectations. This study examines the disclosure strategies of large Australian companies in light of the heightened societal awareness and concern about issues related to carbon footprints. This first aim is to determine whether, consistent with a general need for legitimation, companies are addressing

  8. Assessing potential impacts of phosphate precipitation on nitrous oxide emissions and the carbon footprint of wastewater treatment plants.

    Science.gov (United States)

    Kosse, Pascal; Lübken, Manfred; Schmidt, Torsten C; Lange, Ruben-Laurids; Wichern, Marc

    2018-02-15

    Metal salts are widely used for the precipitation of phosphorus during wastewater treatment transforming soluble orthophosphate to an insoluble salt. In practice, more complex reactions are taking place including a reduction of the chemical solubility of dissolved greenhouse gases, such as nitrous oxide, present in the wastewater stream. In this respect, it was postulated that phosphorous precipitation will lead to artificial N 2 O stripping and hence to an increased carbon footprint of wastewater treatment plants. From lab-scale experiments utilizing N 2 O-saturated synthetic sewage solutions, it was evidenced that metal salt addition leads to N 2 O stripping with 20.8 g N 2 O per liter for a FeCl 2 -based precipitant to 26.4 g N 2 O per liter for a Al n (OH) m Cl3 n-m -based precipitant. Taking this maximum potential stripping effect into account for a carbon footprint analysis, a potential contribution of 16.11 kg CO 2,eq ·PE -1 ·a -1 was calculated in a case study, where FeCl 3 was considered. With respect to the defined system boundary conditions, the overall on-site and off-site CO 2 emissions were raised by 34% from 46.87 kg CO 2,eq ·PE -1 ·a -1 to 62.97 kg CO 2,eq ·PE -1 ·a -1 through CO 2,eq coming from phosphorous precipitation.

  9. Carbon Footprint Analyses of Mainstream Wastewater Treatment Technologies under Different Sludge Treatment Scenarios in China

    Directory of Open Access Journals (Sweden)

    Chunyan Chai

    2015-03-01

    Full Text Available With rapid urbanization and infrastructure investment, wastewater treatment plants (WWTPs in Chinese cities are putting increased pressure on energy consumption and exacerbating greenhouse gas (GHG emissions. A carbon footprint is provided as a tool to quantify the life cycle GHG emissions and identify opportunities to reduce climate change impacts. This study examined three mainstream wastewater treatment technologies: Anaerobic–Anoxic–Oxic (A–A–O, Sequencing Batch Reactor (SBR and Oxygen Ditch, considering four different sludge treatment alternatives for small-to-medium-sized WWTPs. Following the life cycle approach, process design data and emission factors were used by the model to calculate the carbon footprint. Results found that direct emissions of CO2 and N2O, and indirect emissions of electricity use, are significant contributors to the carbon footprint. Although sludge anaerobic digestion and biogas recovery could significantly contribute to emission reduction, it was less beneficial for Oxygen Ditch than the other two treatment technologies due to its low sludge production. The influence of choosing “high risk” or “low risk” N2O emission factors on the carbon footprint was also investigated in this study. Oxygen Ditch was assessed as “low risk” of N2O emissions while SBR was “high risk”. The carbon footprint of A–A–O with sludge anaerobic digestion and energy recovery was more resilient to changes of N2O emission factors and control of N2O emissions, though process design parameters (i.e., effluent total nitrogen (TN concentration, mixed-liquor recycle (MLR rates and solids retention time (SRT and operation conditions (i.e., nitrite concentration are critical for reducing carbon footprint of SBR. Analyses of carbon footprints suggested that aerobic treatment of sludge not only favors the generation of large amounts of CO2, but also the emissions of N2O, so the rationale of reducing aerobic treatment and

  10. Decoupling Water Consumption and Environmental Impact on Textile Industry by Using Water Footprint Method: A Case Study in China

    Directory of Open Access Journals (Sweden)

    Yi Li

    2017-02-01

    Full Text Available The rapid development of China’s textile industry has led to consumption and pollution of large volumes of water. Therefore, the textile industry has been the focus of water conservation and waste reduction in China’s 13th Five-Year Plan (2016–2020. The premise of sustainable development is to achieve decoupling of economic growth from water consumption and wastewater discharge. In this work, changes in the blue water footprint, grey water footprint, and the total water footprint of the textile industry from 2001 to 2014 were calculated. The relationship between water footprint and economic growth was then examined using the Tapio decoupling model. Furthermore, factors influencing water footprint were determined through logarithmic mean Divisia index (LMDI method. Results show that the water footprint of China’s textile industry has strongly decoupled for five years (2003, 2006, 2008, 2011, and 2013 and weakly decoupled for four years (2005, 2007, 2009, and 2010. A decoupling trend occurred during 2001–2014, but a steady stage of decoupling had not been achieved yet. Based on the decomposition analysis, the total water footprint mainly increased along with the production scale. On the contrary, technical level is the most important factor in inhibiting the water footprint. In addition, the effect of industrial structure adjustment is relatively weak.

  11. Water Footprint and Virtual Water Trade of Brazil

    NARCIS (Netherlands)

    da Silva, Vicente de Paulo R.; de Oliveira, Sonaly D.; Hoekstra, Arjen Ysbert; Neto, Jose Dantas; Campos, João Hugo B.C.; Braga, Celia C.; Araújo, Lincoln Eloi; Oliveira Aleixo, Danilo; de Brito, Jose Ivaldo B.; de Souza, Marcio Dionisio; de Holanda, Romildo M.

    2016-01-01

    Freshwater scarcity has increased at an alarming rate worldwide; improved water management plays a vital role in increasing food production and security. This study aims to determine the water footprint of Brazil’s national food consumption, the virtual water flows associated with international

  12. Modeling impacts of human footprint and soil variability on the potential distribution of invasive plant species in different biomes

    Science.gov (United States)

    Wan, Ji-Zhong; Wang, Chun-Jing; Yu, Fei-Hai

    2017-11-01

    Human footprint and soil variability may be important in shaping the spread of invasive plant species (IPS). However, until now, there is little knowledge on how human footprint and soil variability affect the potential distribution of IPS in different biomes. We used Maxent modeling to project the potential distribution of 29 IPS with wide distributions and long introduction histories in China based on various combinations of climatic correlates, soil characteristics and human footprint. Then, we evaluated the relative importance of each type of environmental variables (climate, soil and human footprint) as well as the difference in range and similarity of the potential distribution of IPS between different biomes. Human footprint and soil variables contributed to the prediction of the potential distribution of IPS, and different types of biomes had varying responses and degrees of impacts from the tested variables. Human footprint and soil variability had the highest tendency to increase the potential distribution of IPS in Montane Grasslands and Shrublands. We propose to integrate the assessment in impacts of human footprint and soil variability on the potential distribution of IPS in different biomes into the prevention and control of plant invasion.

  13. Structures of Adnectin/Protein Complexes Reveal an Expanded Binding Footprint

    Energy Technology Data Exchange (ETDEWEB)

    Ramamurthy, Vidhyashankar; Krystek, Jr., Stanley R.; Bush, Alexander; Wei, Anzhi; Emanuel, Stuart L.; Gupta, Ruchira Das; Janjua, Ahsen; Cheng, Lin; Murdock, Melissa; Abramczyk, Bozena; Cohen, Daniel; Lin, Zheng; Morin, Paul; Davis, Jonathan H.; Dabritz, Michael; McLaughlin, Douglas C.; Russo, Katie A.; Chao, Ginger; Wright, Martin C.; Jenny, Victoria A.; Engle, Linda J.; Furfine, Eric; Sheriff, Steven (BMS)

    2014-10-02

    Adnectins are targeted biologics derived from the tenth type III domain of human fibronectin ({sup 10}Fn3), a member of the immunoglobulin superfamily. Target-specific binders are selected from libraries generated by diversifying the three {sup 10}Fn3 loops that are analogous to the complementarity determining regions of antibodies. The crystal structures of two Adnectins were determined, each in complex with its therapeutic target, EGFR or IL-23. Both Adnectins bind different epitopes than those bound by known monoclonal antibodies. Molecular modeling suggests that some of these epitopes might not be accessible to antibodies because of the size and concave shape of the antibody combining site. In addition to interactions from the Adnectin diversified loops, residues from the N terminus and/or the {beta} strands interact with the target proteins in both complexes. Alanine-scanning mutagenesis confirmed the calculated binding energies of these {beta} strand interactions, indicating that these nonloop residues can expand the available binding footprint.

  14. Sustainability of meat production beyond carbon footprint: a synthesis of case studies from grazing systems in Uruguay.

    Science.gov (United States)

    Picasso, Valentín D; Modernel, Pablo D; Becoña, Gonzalo; Salvo, Lucía; Gutiérrez, Lucía; Astigarraga, Laura

    2014-11-01

    Livestock production has been challenged as a large contributor to climate change, and carbon footprint has become a widely used measure of cattle environmental impact. This analysis of fifteen beef grazing systems in Uruguay quantifies the range of variation of carbon footprint, and the trade-offs with other relevant environmental variables, using a partial life cycle assessment (LCA) methodology. Using carbon footprint as the primary environmental indicator has several limitations: different metrics (GWP vs. GTP) may lead to different conclusions, carbon sequestration from soils may drastically affect the results, and systems with lower carbon footprint may have higher energy use, soil erosion, nutrient imbalance, pesticide ecotoxicity, and impact on biodiversity. A multidimensional assessment of sustainability of meat production is therefore needed to inform decision makers. There is great potential to improve grazing livestock systems productivity while reducing carbon footprint and other environmental impacts, and conserving biodiversity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Anatomic single-bundle ACL surgery: consequences of tibial tunnel diameter and drill-guide angle on tibial footprint coverage.

    Science.gov (United States)

    Van der Bracht, H; Verhelst, L; Stuyts, B; Page, B; Bellemans, J; Verdonk, P

    2014-05-01

    To investigate the consequences of differences in drill-guide angle and tibial tunnel diameter on the amount of tibial anatomical anterior cruciate ligament (ACL) footprint coverage and the risk of overhang of the tibial tunnel aperture over the edges of the native tibial ACL footprint. Twenty fresh-frozen adult human knee specimens with a median age of 46 years were used for this study. Digital templates mimicking the ellipsoid aperture of tibial tunnels with a different drill-guide angle and a different diameter were designed. The centres of these templates were positioned over the geometric centre of the tibial ACL footprint. The amount of tibial ACL footprint coverage and overhang was calculated. Risk factors for overhang were determined. Footprint coverage and the risk of overhang were also compared between a lateral tibial tunnel and a classic antero-medial tibial tunnel. A larger tibial tunnel diameter and a smaller drill-guide angle both will create significant more footprint coverage and overhang. In 45% of the knees, an overhang was created with a 10-mm diameter tibial tunnel with drill-guide angle 45°. Furthermore, a lateral tibial tunnel was found not to be at increased risk of overhang. A larger tibial tunnel diameter and a smaller drill-guide angle both will increase the amount of footprint coverage. Inversely, larger tibial tunnel diameters and smaller drill-guide angles will increase the risk of overhang of the tibial tunnel aperture over the edges of the native tibial ACL footprint. A lateral tibial tunnel does not increase the risk of overhang.

  16. Carbon footprint of aerobic biological treatment of winery wastewater.

    Science.gov (United States)

    Rosso, D; Bolzonella, D

    2009-01-01

    The carbon associated with wastewater and its treatment accounts for approximately 6% of the global carbon balance. Within the wastewater treatment industry, winery wastewater has a minor contribution, although it can have a major impact on wine-producing regions. Typically, winery wastewater is treated by biological processes, such as the activated sludge process. Biomass produced during treatment is usually disposed of directly, i.e. without digestion or other anaerobic processes. We applied our previously published model for carbon-footprint calculation to the areas worldwide producing yearly more than 10(6) m(3) of wine (i.e., France, Italy, Spain, California, Argentina, Australia, China, and South Africa). Datasets on wine production from the Food and Agriculture Organisation were processed and wastewater flow rates calculated with assumptions based on our previous experience. Results show that the wine production, hence the calculated wastewater flow, is reported as fairly constant in the period 2005-2007. Nevertheless, treatment process efficiency and energy-conservation may play a significant role on the overall carbon-footprint. We performed a sensitivity analysis on the efficiency of the aeration process (alphaSOTE per unit depth, or alphaSOTE/Z) in the biological treatment operations and showed significant margin for improvement. Our results show that the carbon-footprint reduction via aeration efficiency improvement is in the range of 8.1 to 12.3%.

  17. Preoperational baseline and site characterization report for the Environmental Restoration Disposal Facility. Volume 1, Revision 2

    International Nuclear Information System (INIS)

    Weekes, D.C.; Lindsey, K.A.; Ford, B.H.; Jaeger, G.K.

    1996-12-01

    This document is the first in a two-volume series that comprise the site characterization report. Volume 1 contains data interpretation and information supporting the conclusions in the text (Appendices A through G). Volume 2 provides raw data. A site located between 200 East and 200 West Areas, in the central portion of the Hanford Site, was selected as the prime location for the ERDF. Modifications to the facility design minimize the footprint and have resulted in a significant reduction in the areal size. This change was initiated in part as a response to recommendations of the Hanford Future Site Uses Working Group to limit waste management activities to an exclusive zone within the squared-off boundary of the 200 Areas. Additionally, the reduction in size of the footprint was initiated to minimize impacts to ecology. The ERDF is designed for disposal of remediation wastes generated during the cleanup of Hanford Site and could be expanded to hold as much as 28 million yd 3 (21.4 million m 3 ) of solid waste

  18. Transnational city carbon footprint networks – Exploring carbon links between Australian and Chinese cities

    International Nuclear Information System (INIS)

    Chen, Guangwu; Wiedmann, Thomas; Wang, Yafei; Hadjikakou, Michalis

    2016-01-01

    Highlights: • A trans-national, multi-region input-output analysis for cities is presented. • We examine the carbon footprint network of ten cities. • The balance of emissions embodied in trade discloses a hierarchy of responsibility. • We model how emissions reductions spread through the city carbon networks. • Implications on the Chinese and Australian carbon trading schemes are discussed. - Abstract: Cities are leading actions against climate change through global networks. More than 360 global cities announced during the 2015 Paris Climate Conference that the collective impact of their commitments will deliver over half of the world’s urban greenhouse gas emissions reductions by 2020. Previous studies on multi-city carbon footprint networks using sub-national, multi-region input-output (MRIO) modelling have identified additional opportunities for addressing the negative impacts of climate change through joint actions between cities within a country. However, similar links between city carbon footprints have not yet been studied across countries. In this study we focus on inter-city and inter-country carbon flows between two trading partners in a first attempt to address this gap. We construct a multi-scale, global MRIO model to describe a transnational city carbon footprint network among five Chinese megacities and the five largest Australian capital cities. First, we quantify city carbon footprints by sectors and regions. Based on the carbon map concept we show how local emissions reductions influence other regions’ carbon footprints. We then present a city emissions ’outsourcing hierarchy’ based on the balance of emissions embodied in intercity and international trade. The differences between cities and their position in the hierarchy emphasize the need for a bespoke treatment of their responsibilities towards climate change mitigation. Finally, we evaluate and discuss the potentially significant benefits of harmonising and aligning China

  19. A case study of the carbon footprint of milk from high-performing confinement and grass-based dairy farms.

    Science.gov (United States)

    O'Brien, D; Capper, J L; Garnsworthy, P C; Grainger, C; Shalloo, L

    2014-03-01

    Life-cycle assessment (LCA) is the preferred methodology to assess carbon footprint per unit of milk. The objective of this case study was to apply an LCA method to compare carbon footprints of high-performance confinement and grass-based dairy farms. Physical performance data from research herds were used to quantify carbon footprints of a high-performance Irish grass-based dairy system and a top-performing United Kingdom (UK) confinement dairy system. For the US confinement dairy system, data from the top 5% of herds of a national database were used. Life-cycle assessment was applied using the same dairy farm greenhouse gas (GHG) model for all dairy systems. The model estimated all on- and off-farm GHG sources associated with dairy production until milk is sold from the farm in kilograms of carbon dioxide equivalents (CO2-eq) and allocated emissions between milk and meat. The carbon footprint of milk was calculated by expressing GHG emissions attributed to milk per tonne of energy-corrected milk (ECM). The comparison showed that when GHG emissions were only attributed to milk, the carbon footprint of milk from the Irish grass-based system (837 kg of CO2-eq/t of ECM) was 5% lower than the UK confinement system (884 kg of CO2-eq/t of ECM) and 7% lower than the US confinement system (898 kg of CO2-eq/t of ECM). However, without grassland carbon sequestration, the grass-based and confinement dairy systems had similar carbon footprints per tonne of ECM. Emission algorithms and allocation of GHG emissions between milk and meat also affected the relative difference and order of dairy system carbon footprints. For instance, depending on the method chosen to allocate emissions between milk and meat, the relative difference between the carbon footprints of grass-based and confinement dairy systems varied by 3 to 22%. This indicates that further harmonization of several aspects of the LCA methodology is required to compare carbon footprints of contrasting dairy systems. In

  20. Including carbon emissions from deforestation in the carbon footprint of Brazilian beef.

    Science.gov (United States)

    Cederberg, Christel; Persson, U Martin; Neovius, Kristian; Molander, Sverker; Clift, Roland

    2011-03-01

    Effects of land use changes are starting to be included in estimates of life-cycle greenhouse gas (GHG) emissions, so-called carbon footprints (CFs), from food production. Their omission can lead to serious underestimates, particularly for meat. Here we estimate emissions from the conversion of forest to pasture in the Legal Amazon Region (LAR) of Brazil and present a model to distribute the emissions from deforestation over products and time subsequent to the land use change. Expansion of cattle ranching for beef production is a major cause of deforestation in the LAR. The carbon footprint of beef produced on newly deforested land is estimated at more than 700 kg CO(2)-equivalents per kg carcass weight if direct land use emissions are annualized over 20 years. This is orders of magnitude larger than the figure for beef production on established pasture on non-deforested land. While Brazilian beef exports have originated mainly from areas outside the LAR, i.e. from regions not subject to recent deforestation, we argue that increased production for export has been the key driver of the pasture expansion and deforestation in the LAR during the past decade and this should be reflected in the carbon footprint attributed to beef exports. We conclude that carbon footprint standards must include the more extended effects of land use changes to avoid giving misleading information to policy makers, retailers, and consumers.

  1. Low Computational-Cost Footprint Deformities Diagnosis Sensor through Angles, Dimensions Analysis and Image Processing Techniques

    Directory of Open Access Journals (Sweden)

    J. Rodolfo Maestre-Rendon

    2017-11-01

    Full Text Available Manual measurements of foot anthropometry can lead to errors since this task involves the experience of the specialist who performs them, resulting in different subjective measures from the same footprint. Moreover, some of the diagnoses that are given to classify a footprint deformity are based on a qualitative interpretation by the physician; there is no quantitative interpretation of the footprint. The importance of providing a correct and accurate diagnosis lies in the need to ensure that an appropriate treatment is provided for the improvement of the patient without risking his or her health. Therefore, this article presents a smart sensor that integrates the capture of the footprint, a low computational-cost analysis of the image and the interpretation of the results through a quantitative evaluation. The smart sensor implemented required the use of a camera (Logitech C920 connected to a Raspberry Pi 3, where a graphical interface was made for the capture and processing of the image, and it was adapted to a podoscope conventionally used by specialists such as orthopedist, physiotherapists and podiatrists. The footprint diagnosis smart sensor (FPDSS has proven to be robust to different types of deformity, precise, sensitive and correlated in 0.99 with the measurements from the digitalized image of the ink mat.

  2. [Analysis on sustainable development of marine economy in Jiangsu Province based on marine ecological footprint correction model].

    Science.gov (United States)

    Yang, Shan; Wang, Yu-ting

    2011-03-01

    Based on the theories and methods of ecological footprint, the concept of marine ecological footprint was proposed. According to the characteristics of marine environment in Jiangsu Province, five sub-models of marine ecological footprints, including fishery, transporation, marine engineering construction, marine energy, and tidal flat, were constructed. The equilibrium factors of the five marine types were determined by using improved entropy method, and the marine footprints and capacities in Jiangsu Province from 2000 to 2008 were calculated and analyzed. In 2000-2008, the marine ecology footprint per capita in Jiangsu Province increased nearly seven times, from 36.90 hm2 to 252.94 hm2, and the ecological capacity per capita grew steadily, from 105.01 hm2 to 185.49 hm2. In 2000, the marine environment in the Province was in a state of ecological surplus, and the marine economy was in a weak sustainable development state. Since 2004, the marine ecological environment deteriorated sharply, with ecological deficit up to 109660.5 hm2, and the sustainability of marine economy declined. The high ecological footprint of fishery was the main reason for the ecological deficit. Tidal flat was the important reserve resource for the sustainable development of marine economy in Jiangsu Province.

  3. Learning a Weighted Sequence Model of the Nucleosome Core and Linker Yields More Accurate Predictions in Saccharomyces cerevisiae and Homo sapiens

    Science.gov (United States)

    Reynolds, Sheila M.; Bilmes, Jeff A.; Noble, William Stafford

    2010-01-01

    DNA in eukaryotes is packaged into a chromatin complex, the most basic element of which is the nucleosome. The precise positioning of the nucleosome cores allows for selective access to the DNA, and the mechanisms that control this positioning are important pieces of the gene expression puzzle. We describe a large-scale nucleosome pattern that jointly characterizes the nucleosome core and the adjacent linkers and is predominantly characterized by long-range oscillations in the mono, di- and tri-nucleotide content of the DNA sequence, and we show that this pattern can be used to predict nucleosome positions in both Homo sapiens and Saccharomyces cerevisiae more accurately than previously published methods. Surprisingly, in both H. sapiens and S. cerevisiae, the most informative individual features are the mono-nucleotide patterns, although the inclusion of di- and tri-nucleotide features results in improved performance. Our approach combines a much longer pattern than has been previously used to predict nucleosome positioning from sequence—301 base pairs, centered at the position to be scored—with a novel discriminative classification approach that selectively weights the contributions from each of the input features. The resulting scores are relatively insensitive to local AT-content and can be used to accurately discriminate putative dyad positions from adjacent linker regions without requiring an additional dynamic programming step and without the attendant edge effects and assumptions about linker length modeling and overall nucleosome density. Our approach produces the best dyad-linker classification results published to date in H. sapiens, and outperforms two recently published models on a large set of S. cerevisiae nucleosome positions. Our results suggest that in both genomes, a comparable and relatively small fraction of nucleosomes are well-positioned and that these positions are predictable based on sequence alone. We believe that the bulk of the

  4. PREVAIL TRANSAPICAL: multicentre trial of transcatheter aortic valve implantation using the newly designed bioprosthesis (SAPIEN-XT) and delivery system (ASCENDRA-II).

    Science.gov (United States)

    Walther, Thomas; Thielmann, Matthias; Kempfert, Joerg; Schroefel, Holger; Wimmer-Greinecker, Gerhard; Treede, Hendrik; Wahlers, Thorsten; Wendler, Olaf

    2012-08-01

    Transapical (TA) aortic valve implantation (AVI) has evolved as an alternative procedure for high-risk patients. We evaluated the second-generation SAPIEN XT™ prosthesis in a prospective multicentre clinical trial. A total of 150 patients (age: 81.6 ± 5.8 years; 40.7% female) were included. Prosthetic valves (diameter: 23 mm (n = 36), 26 mm (n = 57) and 29 mm (n = 57)) were implanted. The ASCENDRA-II™ modified delivery system was used in the smaller sizes. Mean logistic EuroSCORE was 24.3 ± 7.0%, and mean STS score 7.5 ± 4.4%. All patients gave written informed consent. Off-pump AVI was performed using femoral arterial and venous access wires as a safety net. All but two patients received TA-AVI, as planned. The 29-mm valve showed similar function as the values of two other diameters did. Three patients (2%) required temporary cardiopulmonary bypass support. Postoperative complications included renal failure requiring long-term dialysis in four, bleeding requiring rethoracotomy in four, respiratory complication requiring reintubation in eight and sepsis in four patients, respectively. Thirty-day mortality was 13 (8.7%) for the total cohort and 2/57 (3.5%) for patients receiving the 29-mm valve, respectively. Echocardiography at discharge showed none or trivial aortic incompetence (AI) in 71% and mild-AI in 22% of the patients. Post-implantation AI was predominantly paravalvular and ≥ 2+ in 7% of patients. One patient required reoperation for AI within 30 days. The PREVAIL TA multicentre trial demonstrates good functionality and good outcomes for TA-AVI, using the SAPIEN XT™ prosthesis and its second-generation ASCENDRA-II™ delivery system, as well successful introduction of the 29-mm SAPIEN XT™ valve for the benefit of high-risk elderly patients.

  5. Learning a weighted sequence model of the nucleosome core and linker yields more accurate predictions in Saccharomyces cerevisiae and Homo sapiens.

    Directory of Open Access Journals (Sweden)

    Sheila M Reynolds

    2010-07-01

    Full Text Available DNA in eukaryotes is packaged into a chromatin complex, the most basic element of which is the nucleosome. The precise positioning of the nucleosome cores allows for selective access to the DNA, and the mechanisms that control this positioning are important pieces of the gene expression puzzle. We describe a large-scale nucleosome pattern that jointly characterizes the nucleosome core and the adjacent linkers and is predominantly characterized by long-range oscillations in the mono, di- and tri-nucleotide content of the DNA sequence, and we show that this pattern can be used to predict nucleosome positions in both Homo sapiens and Saccharomyces cerevisiae more accurately than previously published methods. Surprisingly, in both H. sapiens and S. cerevisiae, the most informative individual features are the mono-nucleotide patterns, although the inclusion of di- and tri-nucleotide features results in improved performance. Our approach combines a much longer pattern than has been previously used to predict nucleosome positioning from sequence-301 base pairs, centered at the position to be scored-with a novel discriminative classification approach that selectively weights the contributions from each of the input features. The resulting scores are relatively insensitive to local AT-content and can be used to accurately discriminate putative dyad positions from adjacent linker regions without requiring an additional dynamic programming step and without the attendant edge effects and assumptions about linker length modeling and overall nucleosome density. Our approach produces the best dyad-linker classification results published to date in H. sapiens, and outperforms two recently published models on a large set of S. cerevisiae nucleosome positions. Our results suggest that in both genomes, a comparable and relatively small fraction of nucleosomes are well-positioned and that these positions are predictable based on sequence alone. We believe that the

  6. Learning a weighted sequence model of the nucleosome core and linker yields more accurate predictions in Saccharomyces cerevisiae and Homo sapiens.

    Science.gov (United States)

    Reynolds, Sheila M; Bilmes, Jeff A; Noble, William Stafford

    2010-07-08

    DNA in eukaryotes is packaged into a chromatin complex, the most basic element of which is the nucleosome. The precise positioning of the nucleosome cores allows for selective access to the DNA, and the mechanisms that control this positioning are important pieces of the gene expression puzzle. We describe a large-scale nucleosome pattern that jointly characterizes the nucleosome core and the adjacent linkers and is predominantly characterized by long-range oscillations in the mono, di- and tri-nucleotide content of the DNA sequence, and we show that this pattern can be used to predict nucleosome positions in both Homo sapiens and Saccharomyces cerevisiae more accurately than previously published methods. Surprisingly, in both H. sapiens and S. cerevisiae, the most informative individual features are the mono-nucleotide patterns, although the inclusion of di- and tri-nucleotide features results in improved performance. Our approach combines a much longer pattern than has been previously used to predict nucleosome positioning from sequence-301 base pairs, centered at the position to be scored-with a novel discriminative classification approach that selectively weights the contributions from each of the input features. The resulting scores are relatively insensitive to local AT-content and can be used to accurately discriminate putative dyad positions from adjacent linker regions without requiring an additional dynamic programming step and without the attendant edge effects and assumptions about linker length modeling and overall nucleosome density. Our approach produces the best dyad-linker classification results published to date in H. sapiens, and outperforms two recently published models on a large set of S. cerevisiae nucleosome positions. Our results suggest that in both genomes, a comparable and relatively small fraction of nucleosomes are well-positioned and that these positions are predictable based on sequence alone. We believe that the bulk of the

  7. The forensic analysis of soils and sediment taken from the cast of a footprint.

    Science.gov (United States)

    Bull, Peter A; Parker, Adrian; Morgan, Ruth M

    2006-10-16

    The routine production of a cast of a shoe-print taken in soil provides information other than shoe size and gait. Material adhering to the surface of the cast represents the preservation of the moment of footprint impression. The analysis of the interface between the cast and soil is therefore a potentially lucrative source of information for forensic reconstruction. These principles are demonstrated with reference to a murder case which took place in the English Midlands. The cast of a footprint provided evidence of a two-way transfer of material between the sole of a boot and the soil of a recently ploughed field. Lumps of soil, which had dried on a boot, were deposited on the field as the footprints were made. Pollen analysis of these lumps of soil indicated that the perpetrator of the imprint had been standing recently in a nearby stream. Fibre analysis together with physical and chemical characteristics of the soil suggested a provenance for contamination of this mud prior to deposition of the footprint. Carbon/nitrogen ratios of the water taken from the cast showed that distilled water had been used thus excluding the possibility of contamination of the boot-soil interface. It was possible to reconstruct three phases of previous activity of the wearer of the boot prior to leaving the footprint in the field after the murder had taken place. This analysis shows the power of integrating different independent techniques in the analysis of hitherto unrecognised forensic materials.

  8. Carbon and energy footprint analysis of tannery wastewater treatment: A Global overview

    Directory of Open Access Journals (Sweden)

    Francesca Giaccherini

    2017-06-01

    Full Text Available In this study the carbon footprint and power demand of tannery wastewater treatment processes for the largest bovine leather producing regions were quantified and analysed. Moreover, we present a case in which we benchmarked the carbon footprint and energy demand analysis of tannery wastewater treatment to municipal wastewater treatment. We quantified the greenhouse gas direct and indirect emissions from tannery wastewater treatment facilities. Our results show that the total CO2-equivalent emission for tannery wastewater treatment is 1.49 103 tCO2,eq d−1. Moreover, the energy intensity of tannery wastewater treatment processes are evaluated at 3.9 kWh kg−1bCOD,removed, compared to 1.4 kWh kg−1bCOD,removed of municipal wastewater treatment processes. Based on this work in the field of tannery wastewater treatment, an effort to innovate suitable treatment trains and technologies has the strong potential to reduce the carbon footprint.

  9. Quality control of CarboEurope flux data – Part 1: Coupling footprint analyses with flux data quality assessment to evaluate sites in forest ecosystems

    Czech Academy of Sciences Publication Activity Database

    Göckede, M.; Foken, T.; Aubinet, M.; Aurela, M.; Banza, J.; Bernhofer, C.; Bonnefond, J. M.; Brunet, Y.; Carrara, A.; Clement, R.; Dellwik, E.; Elbers, J.; Eugster, W.; Fuhrer, J.; Granier, A.; Grünwald, T.; Heinesch, B.; Janssens, I. A.; Knohl, A.; Koeble, R.; Laurila, T.; Longdoz, B.; Manca, G.; Marek, Michal V.; Markkanen, T.; Mateus, J.; Matteucci, G.; Mauder, M.; Migliavacca, M.; Minerbi, S.; Moncrieff, J.; Montagnani, L.; Moors, E.; Ourcival, J.M.; Papale, D.; Pereira, J.; Pilegaard, K.; Pita, G.; Rambal, S.; Rebmann, C.; Rodrigues, A.; Rotenberg, E.; Sanz, M. J.; Sedlák, Pavel; Seufert, G.; Siebicke, L.; Soussana, J. F.; Valentini, R.; Vesala, T.; Verbeeck, H.; Yakir, D.

    2008-01-01

    Roč. 5, č. 2 (2008), s. 433-450 ISSN 1726-4170 Grant - others:CarboEurope-IP(XE) GOCE-CT-2003-505572 Institutional research plan: CEZ:AV0Z30420517; CEZ:AV0Z60870520 Keywords : Eddy covariance * Quality assurance * Footprint modelling * Heterogeneity Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 3.445, year: 2008 http://www.biogeosciences.net/5/433/2008/

  10. Genome-Wide Footprints of Pig Domestication and Selection Revealed through Massive Parallel Sequencing of Pooled DNA

    NARCIS (Netherlands)

    Amaral, A.J.; Ferretti, L.; Megens, H.J.W.C.; Crooijmans, R.P.M.A.; Nie, H.; Ramos-Onsins, S.E.; Perez-Enciso, M.; Schook, L.B.; Groenen, M.A.M.

    2011-01-01

    Background Artificial selection has caused rapid evolution in domesticated species. The identification of selection footprints across domesticated genomes can contribute to uncover the genetic basis of phenotypic diversity. Methodology/Main Findings Genome wide footprints of pig domestication and

  11. Software Energy Footprint Lab (SEFlab). Towards the use of energy efficient software applications; Software Energy Footprint Lab (SEFlab). Naar toepassing van energiezuinige softwareapplicaties

    Energy Technology Data Exchange (ETDEWEB)

    Merkus, B.; Hoekstra, E.; Van den Hoed, R. [Hogeschool van Amsterdam HvA, Amsterdam (Netherlands)

    2012-12-15

    The Energy Footprint Software Lab (SEFLab) allows researchers to give a detailed overview of the energy consumption of the hardware and software with a combination of advanced techniques in a controlled environment. The project comprised four main activities: (1) professionalization of measurement setup and test protocol; (2) Concrete calculation of two software applications as case studies; (3) an (internal) stakeholder analysis; and (4) dissemination of results [Dutch] Het Software Energy Footprint Lab (SEFLab) stelt onderzoekers in staat met een combinatie van geavanceerde technieken in een gecontroleerde omgeving een gedetailleerd beeld van het energieverbruik van de hardware n.a.v. software-gebruik te meten. Binnen het project stonden vier activiteiten centraal: (1) professionalisering van meetopstelling en testprotocol; (2) concrete doorrekening van twee softwareapplicaties als cases; (3) een (interne) stakeholder-analyse; en (4) disseminatie van resultaten.

  12. Area of Concern: A new paradigm in life cycle assessment for the development of footprint metrics

    DEFF Research Database (Denmark)

    Ridoutt, Bradley G.; Pfister, Stephan; Manzardo, Alessandro

    2016-01-01

    As a class of environmental metrics, footprints have been poorly defined, have shared an unclear relationship to life cycle assessment (LCA), and the variety of approaches to quantification have sometimes resulted in confusing and contradictory messages in the marketplace. In response, a task force...... operating under the auspices of the UNEP/SETAC Life Cycle Initiative project on environmental life cycle impact assessment (LCIA) has been working to develop generic guidance for developers of footprint metrics. The purpose of this paper is to introduce a universal footprint definition and related...... terminology as well as to discuss modelling implications. The task force has worked from the perspective that footprints should be based on LCA methodology, underpinned by the same data systems and models as used in LCA. However, there are important differences in purpose and orientation relative to LCA...

  13. Calculating Puerto Rico’s Ecological Footprint (1970–2010 Using Freely Available Data

    Directory of Open Access Journals (Sweden)

    Matthew E. Hopton

    2015-07-01

    Full Text Available Ecological Footprint Analysis (EFA is appealing as a metric of sustainability because it is straightforward in theory and easy to conceptualize. However, EFA is difficult to implement because it requires extensive data. A simplified approach to EFA that requires fewer data can serve as a perfunctory analysis allowing researchers to examine a system with relatively little cost and effort. We examined whether a simplified approach using freely available data could be applied to Puerto Rico, a densely populated island with limited land resources. Forty-one years of data were assembled to compute the ecological footprint from 1970 to 2010. According to EFA, individuals in Puerto Rico were moving toward sustainability over time, as the per capita ecological footprint decreased from 3.69 ha per capita (ha/ca in 1970 to 3.05 ha/ca in 2010. However, due to population growth, the population’s footprint rose from 1.00 × 107 ha in 1970 to 1.14 × 107 ha in 2010, indicating Puerto Rico as a whole was moving away from sustainability. Our findings demonstrate the promise for conducting EFA using a simplified approach with freely available data, and we discuss potential limitations on data quality and availability that should be addressed to further improve the science.

  14. Anatomical masking of pressure footprints based on the Oxford Foot Model: validation and clinical relevance.

    Science.gov (United States)

    Giacomozzi, Claudia; Stebbins, Julie A

    2017-03-01

    Plantar pressure analysis is widely used in the assessment of foot function. In order to assess regional loading, a mask is applied to the footprint to sub-divide it into regions of interest (ROIs). The most common masking method is based on geometric features of the footprint (GM). Footprint masking based on anatomical landmarks of the foot has been implemented more recently, and involves the integration of a 3D motion capture system, plantar pressure measurement device, and a multi-segment foot model. However, thorough validation of anatomical masking (AM) using pathological footprints has not yet been presented. In the present study, an AM method based on the Oxford Foot Model (OFM) was compared to an equivalent GM. Pressure footprints from 20 young healthy subjects (HG) and 20 patients with clubfoot (CF) were anatomically divided into 5 ROIs using a subset of the OFM markers. The same foot regions were also identified by using a standard GM method. Comparisons of intra-subject coefficient of variation (CV) showed that the OFM-based AM was at least as reliable as the GM for all investigated pressure parameters in all foot regions. Clinical relevance of AM was investigated by comparing footprints from HG and CF groups. Contact time, maximum force, force-time integral and contact area proved to be sensitive parameters that were able to distinguish HG and CF groups, using both AM and GM methods However, the AM method revealed statistically significant differences between groups in 75% of measured variables, compared to 62% using a standard GM method, indicating that the AM method is more sensitive for revealing differences between groups. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Embedded Volttron specification - benchmarking small footprint compute device for Volttron

    Energy Technology Data Exchange (ETDEWEB)

    Sanyal, Jibonananda [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fugate, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Woodworth, Ken [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nutaro, James J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kuruganti, Teja [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-08-17

    An embedded system is a small footprint computing unit that typically serves a specific purpose closely associated with measurements and control of hardware devices. These units are designed for reasonable durability and operations in a wide range of operating conditions. Some embedded systems support real-time operations and can demonstrate high levels of reliability. Many have failsafe mechanisms built to handle graceful shutdown of the device in exception conditions. The available memory, processing power, and network connectivity of these devices are limited due to the nature of their specific-purpose design and intended application. Industry practice is to carefully design the software for the available hardware capability to suit desired deployment needs. Volttron is an open source agent development and deployment platform designed to enable researchers to interact with devices and appliances without having to write drivers themselves. Hosting Volttron on small footprint embeddable devices enables its demonstration for embedded use. This report details the steps required and the experience in setting up and running Volttron applications on three small footprint devices: the Intel Next Unit of Computing (NUC), the Raspberry Pi 2, and the BeagleBone Black. In addition, the report also details preliminary investigation of the execution performance of Volttron on these devices.

  16. Water Footprint of Milk Produced and Processed in South Africa: Implications for Policy-Makers and Stakeholders along the Dairy Value Chain

    Directory of Open Access Journals (Sweden)

    Enoch Owusu-Sekyere

    2016-07-01

    Full Text Available The current water scarcity situation in South Africa is a threat to sustainable development. The present paper has assessed the water footprint of milk produced and processed in South Africa using the procedures outlined in the water footprint assessment manual. The results show that 1352 m3 of water is required to produce one tonne of milk with 4% fat and 3.3% protein in South Africa. The water used in producing feed for lactating cows alone accounts for 86.35% of the total water footprint of milk. The water footprint of feed ration for lactating cows is about 85% higher than that of non-lactating cows. Green water footprint accounts for more than 86% of the total water footprint of feed ration for lactating cows. Green and blue water footprints are the highest contributors to the total water footprint milk production in South Africa. Water used for feed production for both lactating and non-lactating cows accounts for about 99% of the total water footprint of milk production in South Africa. Particular attention should be given to feed crops with low water footprints and high contribution to dry matter to provide balanced ration with low water footprint. Water users, managers and livestock producers should pay attention to green and blue water consumption activities along the milk value chain and design strategies to minimize them. Corn, sorghum and lucerne production under irrigation in the greater Orange River basin is sustainable, whereas oats production for silage in the same catchment area is not sustainable. Our findings provide the rationale for dairy producers and water users in the dairy industry to get an understanding of the degree of sustainability of their input and output combinations, production choices, and policy interventions, in terms of water use.

  17. Pre-Service Science Teachers' Views of the Ecological Footprint: The Starting-Points of Sustainable Living

    Science.gov (United States)

    Keles, Ozgul; Aydogdu, Mustafa

    2010-01-01

    In this study, pre-service science teachers' opinions about the concept of the ecological footprint were investigated before and after activities about sustainable life and their ecological footprints were calculated. A total of 49 pre-service science teachers (31 male, 18 female) who attend third class in the science education department…

  18. Successful transfemoral aortic Edwards(®) SAPIEN(®) bioprosthesis implantation without using iodinated contrast media in a woman with severe allergy to contrast agent.

    Science.gov (United States)

    Leroux, Lionel; Dijos, Marina; Dos Santos, Pierre

    2013-12-01

    Severe anaphylactoid reaction after the use of iodinated contrast media are rare but can contraindicate the use of contrast agent. It was the case of a 53-year-old woman suffering from symptomatic severe aortic stenosis, recused for cardiac surgery because of deleterious effects of chest-wall irradiation, with porcelain aorta. We decided to implant a 23-mm Edwards(®) SAPIEN(®) transcatheter aortic valve via a femoral route without using any contrast media. The implantation was successful after surgical approach of the femoral artery, transesophageal echocardiography guiding, and localization of native leaflets and coronary trunk with catheters. Immediate and one month post-interventional follow-up was favorable and echocardiography showed a good functioning of the aortic bioprosthesis. Although conventional angiography is the best way to visualize the good positioning of the valve before deployment, our case suggests that, in special situations, transfemoral implantation of an Edwards(®) SAPIEN(®) aortic bioprosthesis is feasible without any contrast injection. Copyright © 2012 Wiley Periodicals, Inc.

  19. Morphological size evaluation of the mid-substance insertion areas and the fan-like extension fibers in the femoral ACL footprint.

    Science.gov (United States)

    Suruga, Makoto; Horaguchi, Takashi; Iriuchishima, Takanori; Yahagi, Yoshiyuki; Iwama, Genki; Tokuhashi, Yasuaki; Aizawa, Shin

    2017-08-01

    The purpose of this study was to evaluate the detailed anatomy of the femoral anterior cruciate ligament (ACL) insertion site, with special attention given to the morphology of the mid-substance insertion areas and the fan-like extension fibers. Twenty-three non-paired human cadaver knees were used (7 Males, 16 Females, median age 83, range 69-96). All soft tissues around the knee were resected except the ligaments. The ACL was divided into antero-medial (AM) and postero-lateral (PL) bundles according to the difference in macroscopic tension patterns. The ACL was carefully dissected and two outlines were made of the periphery of each bundle insertion site: those which included and those which excluded the fan-like extension fibers. An accurate lateral view of the femoral condyle was photographed with a digital camera, and the images were downloaded to a personal computer. The area of each bundle, including and excluding the fan-like extension fibers, was measured with Image J software (National Institution of Health). The width and length of the mid-substance insertion sites were also evaluated using same image. The femoral ACL footprint was divided into four regions (mid-substance insertion sites of the AM and PL bundles, and fan-like extensions of the AM and PL bundles). The measured areas of the mid-substance insertion sites of the AM and PL bundles were 35.5 ± 12.5, and 32.4 ± 13.8 mm 2 , respectively. Whole width and length of the mid-substance insertion sites were 5.3 ± 1.4, and 15.5 ± 2.9 mm, respectively. The measured areas of the fan-like extensions of the AM and PL bundles were 27 ± 11.5, and 29.5 ± 12.4 mm 2 , respectively. The femoral ACL footprint was divided into quarters of approximately equal size (mid-substance insertion sites of the AM and PL bundles, and fan-like extensions of the AM and PL bundles). For clinical relevance, to perform highly reproducible anatomical ACL reconstruction, the presence of the fan-like extension

  20. Comparing Carbon and Water Footprints for Beef Cattle Production in Southern Australia

    Directory of Open Access Journals (Sweden)

    Bradley G. Ridoutt

    2011-12-01

    Full Text Available Stand-alone environmental indicators based on life cycle assessment (LCA, such as the carbon footprint and water footprint, are becoming increasingly popular as a means of directing sustainable production and consumption. However, individually, these metrics violate the principle of LCA known as comprehensiveness and do not necessarily provide an indication of overall environmental impact. In this study, the carbon footprints for six diverse beef cattle production systems in southern Australia were calculated and found to range from 10.1 to 12.7 kg CO2e kg−1 live weight (cradle to farm gate. This compared to water footprints, which ranged from 3.3 to 221 L H2Oe kg−1 live weight. For these systems, the life cycle impacts of greenhouse gas (GHG emissions and water use were subsequently modelled using endpoint indicators and aggregated to enable comparison. In all cases, impacts from GHG emissions were most important, representing 93 to 99% of the combined scores. As such, the industry’s existing priority of GHG emissions reduction is affirmed. In an attempt to balance the demands of comprehensiveness and simplicity, to achieve reliable public reporting of the environmental impacts of a large number of products across the economy, a multi-indicator approach based on combined midpoint and endpoint life cycle impact assessment modelling is proposed. For agri-food products, impacts from land use should also be included as tradeoffs between GHG emissions, water use and land use are common.

  1. Morphing of Building Footprints Using a Turning Angle Function

    Directory of Open Access Journals (Sweden)

    Jingzhong Li

    2017-06-01

    Full Text Available We study the problem of morphing two polygons of building footprints at two different scales. This problem frequently occurs during the continuous zooming of interactive maps. The ground plan of a building footprint on a map has orthogonal characteristics, but traditional morphing methods cannot preserve these geographic characteristics at intermediate scales. We attempt to address this issue by presenting a turning angle function-based morphing model (TAFBM that can generate polygons at an intermediate scale with an identical turning angle for each side. Thus, the orthogonal characteristics can be preserved during the entire interpolation. A case study demonstrates that the model yields good results when applied to data from a building map at various scales. During the continuous generalization, the orthogonal characteristics and their relationships with the spatial direction and topology are well preserved.

  2. The inequality footprints of nations: a novel approach to quantitative accounting of income inequality.

    Directory of Open Access Journals (Sweden)

    Ali Alsamawi

    Full Text Available In this study we use economic input-output analysis to calculate the inequality footprint of nations. An inequality footprint shows the link that each country's domestic economic activity has to income distribution elsewhere in the world. To this end we use employment and household income accounts for 187 countries and an historical time series dating back to 1990. Our results show that in 2010, most developed countries had an inequality footprint that was higher than their within-country inequality, meaning that in order to support domestic lifestyles, these countries source imports from more unequal economies. Amongst exceptions are the United States and United Kingdom, which placed them on a par with many developing countries. Russia has a high within-country inequality nevertheless it has the lowest inequality footprint in the world, which is because of its trade connections with the Commonwealth of Independent States and Europe. Our findings show that the commodities that are inequality-intensive, such as electronic components, chemicals, fertilizers, minerals, and agricultural products often originate in developing countries characterized by high levels of inequality. Consumption of these commodities may implicate within-country inequality in both developing and developed countries.

  3. The inequality footprints of nations: a novel approach to quantitative accounting of income inequality.

    Science.gov (United States)

    Alsamawi, Ali; Murray, Joy; Lenzen, Manfred; Moran, Daniel; Kanemoto, Keiichiro

    2014-01-01

    In this study we use economic input-output analysis to calculate the inequality footprint of nations. An inequality footprint shows the link that each country's domestic economic activity has to income distribution elsewhere in the world. To this end we use employment and household income accounts for 187 countries and an historical time series dating back to 1990. Our results show that in 2010, most developed countries had an inequality footprint that was higher than their within-country inequality, meaning that in order to support domestic lifestyles, these countries source imports from more unequal economies. Amongst exceptions are the United States and United Kingdom, which placed them on a par with many developing countries. Russia has a high within-country inequality nevertheless it has the lowest inequality footprint in the world, which is because of its trade connections with the Commonwealth of Independent States and Europe. Our findings show that the commodities that are inequality-intensive, such as electronic components, chemicals, fertilizers, minerals, and agricultural products often originate in developing countries characterized by high levels of inequality. Consumption of these commodities may implicate within-country inequality in both developing and developed countries.

  4. High Resolution Spatial Mapping of Human Footprint across Antarctica and Its Implications for the Strategic Conservation of Avifauna

    OpenAIRE

    Peter, Hans-Ulrich; Pertierra, Luis R.; Hughes, Kevin A.; Vega, Greta C.; Olalla-Tárraga, Miguel Á.

    2017-01-01

    Human footprint models allow visualization of human spatial pressure across the globe. Up until now, Antarctica has been omitted from global footprint models, due possibly to the lack of a permanent human population and poor accessibility to necessary datasets. Yet Antarctic ecosystems face increasing cumulative impacts from the expanding tourism industry and national Antarctic operator activities, the management of which could be improved with footprint assessment tools. Moreover, Antarctic ...

  5. A Review on Structures and Functions of Bcl-2 Family Proteins from Homo sapiens.

    Science.gov (United States)

    Sivakumar, Dakshinamurthy; Sivaraman, Thirunavukkarasu

    2016-01-01

    Cancer cells evade apoptosis, which is regulated by proteins of Bcl-2 family in the intrinsic pathways. Numerous experimental three-dimensional (3D) structures of the apoptotic proteins and the proteins bound with small chemical molecules/peptides/proteins have been reported in the literature. In this review article, the 3D structures of the Bcl-2 family proteins from Homo sapiens and as well complex structures of the anti-apoptotic proteins bound with small molecular inhibitors reported in the literature to date have been comprehensively listed out and described in detail. Moreover, the molecular mechanisms by which the Bcl-2 family proteins modulate the apoptotic processes and strategies for designing antagonists to anti-apoptotic proteins have been concisely discussed.

  6. Barriers to Mitigate Carbon Footprint in a Selected Academic Institution in Bacoor City, Cavite, Philippines

    Science.gov (United States)

    Adanza, Jonathan R.

    2016-01-01

    Carbon footprint is an environmental menace that needs to be addressed at once. Various mitigating measures were proposed and yet manifestations of its proliferation are very much observable. This study seeks to determine primarily the barriers of non-adherence to identified measures to mitigate carbon footprint in the environment. Using the mixed…

  7. Structural modelling and comparative analysis of homologous, analogous and specific proteins from Trypanosoma cruzi versus Homo sapiens: putative drug targets for chagas' disease treatment.

    Science.gov (United States)

    Capriles, Priscila V S Z; Guimarães, Ana C R; Otto, Thomas D; Miranda, Antonio B; Dardenne, Laurent E; Degrave, Wim M

    2010-10-29

    Trypanosoma cruzi is the etiological agent of Chagas' disease, an endemic infection that causes thousands of deaths every year in Latin America. Therapeutic options remain inefficient, demanding the search for new drugs and/or new molecular targets. Such efforts can focus on proteins that are specific to the parasite, but analogous enzymes and enzymes with a three-dimensional (3D) structure sufficiently different from the corresponding host proteins may represent equally interesting targets. In order to find these targets we used the workflows MHOLline and AnEnΠ obtaining 3D models from homologous, analogous and specific proteins of Trypanosoma cruzi versus Homo sapiens. We applied genome wide comparative modelling techniques to obtain 3D models for 3,286 predicted proteins of T. cruzi. In combination with comparative genome analysis to Homo sapiens, we were able to identify a subset of 397 enzyme sequences, of which 356 are homologous, 3 analogous and 38 specific to the parasite. In this work, we present a set of 397 enzyme models of T. cruzi that can constitute potential structure-based drug targets to be investigated for the development of new strategies to fight Chagas' disease. The strategies presented here support the concept of structural analysis in conjunction with protein functional analysis as an interesting computational methodology to detect potential targets for structure-based rational drug design. For example, 2,4-dienoyl-CoA reductase (EC 1.3.1.34) and triacylglycerol lipase (EC 3.1.1.3), classified as analogous proteins in relation to H. sapiens enzymes, were identified as new potential molecular targets.

  8. The mitogenome of a 35,000-year-old Homo sapiens from Europe supports a Palaeolithic back-migration to Africa.

    Science.gov (United States)

    Hervella, M; Svensson, E M; Alberdi, A; Günther, T; Izagirre, N; Munters, A R; Alonso, S; Ioana, M; Ridiche, F; Soficaru, A; Jakobsson, M; Netea, M G; de-la-Rua, C

    2016-05-19

    After the dispersal of modern humans (Homo sapiens) Out of Africa, hominins with a similar morphology to that of present-day humans initiated the gradual demographic expansion into Eurasia. The mitogenome (33-fold coverage) of the Peştera Muierii 1 individual (PM1) from Romania (35 ky cal BP) we present in this article corresponds fully to Homo sapiens, whilst exhibiting a mosaic of morphological features related to both modern humans and Neandertals. We have identified the PM1 mitogenome as a basal haplogroup U6*, not previously found in any ancient or present-day humans. The derived U6 haplotypes are predominantly found in present-day North-Western African populations. Concomitantly, those found in Europe have been attributed to recent gene-flow from North Africa. The presence of the basal haplogroup U6* in South East Europe (Romania) at 35 ky BP confirms a Eurasian origin of the U6 mitochondrial lineage. Consequently, we propose that the PM1 lineage is an offshoot to South East Europe that can be traced to the Early Upper Paleolithic back migration from Western Asia to North Africa, during which the U6 lineage diversified, until the emergence of the present-day U6 African lineages.

  9. Carbon footprint of robotically-assisted laparoscopy, laparoscopy and laparotomy: a comparison.

    Science.gov (United States)

    Woods, Demetrius L; McAndrew, Thomas; Nevadunsky, Nicole; Hou, June Y; Goldberg, Gary; Yi-Shin Kuo, Dennis; Isani, Sara

    2015-12-01

    To date there have been no comprehensive, comparative assessments of the environmental impact of surgical modalities. Our study seeks to quantify and compare the total greenhouse gas emissions, or 'carbon footprint', attributable to three surgical modalities. A review of 150 staging procedures, employing laparotomy (LAP), conventional laparoscopy (LSC) or robotically-assisted laparoscopy (RA-LSC), was performed. The solid waste generated (kg) and energy consumed (kWh) during each case were quantified and converted into their equivalent mass of carbon dioxide (kg CO(2) e) release into the environment. The carbon footprint is the sum of the waste production and energy consumption during each surgery (kg CO(2) e). The total carbon footprint of a RA-LSC procedure is 40.3 kg CO(2) e/patient (p < 0.01). This represents a 38% increase over that of LSC (29.2 kg CO(2) e/patient; p < 0.01) and a 77% increase over LAP (22.7 kg CO(2) e/patient; p < 0.01). Our results provide clinicians, administrators and policy-makers with knowledge of the environmental impact of their decisions to facilitate adoption of sustainable practices. Copyright © 2015 John Wiley & Sons, Ltd.

  10. Carbon Footprint Estimation in Fiber Optics Industry: A Case Study of OFS Fitel, LLC

    Directory of Open Access Journals (Sweden)

    Suresh Inakollu

    2017-05-01

    Full Text Available Detailed carbon footprinting assignments have been on the rise in more and more major manufacturing industries. The main strength of carbon footprinting is to make product manufacturers aware of carbon emissions and understand its meaning due to perceived global warming effects. Carbon foot-printing through life-cycle assessment in conjunction with greenhouse gas (GHG accounting is essential for identifying opportunities for environmental efficiencies. Case studies of goods that require more complex production elements have also been increasing, like optical fiber manufacturing. From making ultra-pure glass rods to elongating hot fibers, the whole process involves using a high volume of chemicals and extensive energy. Hence, standard numbers addressing carbon footprinting specifically for fiber optics is helpful for the quantification of greenhouse gas intensity, mitigation of global warming, and adaptation against future climate change scenarios. This paper calculates and helps standardize the emission factor for the production of optical fiber from the scope of gate-to-gate: 4.81 tonnes CO2eq per million meters of produced fiber (which is 72.92 kg CO2eq per kg of produced fiber in order to allow other industries to use this information in their own carbon footprint calculations. Since governmental regulatory agencies have largely failed to confront the risks associated with climate change borne by industries, it is essential for all industries to disclose their emissions in a standardized and comparable form in order to develop standard guidelines for all. This paper provides a practical life-cycle approach, concludes with requirements for further research and evaluation.

  11. Inferential reasoning by exclusion in children (Homo sapiens).

    Science.gov (United States)

    Hill, Andrew; Collier-Baker, Emma; Suddendorf, Thomas

    2012-08-01

    The cups task is the most widely adopted forced-choice paradigm for comparative studies of inferential reasoning by exclusion. In this task, subjects are presented with two cups, one of which has been surreptitiously baited. When the empty cup is shaken or its interior shown, it is possible to infer by exclusion that the alternative cup contains the reward. The present study extends the existing body of comparative work to include human children (Homo sapiens). Like chimpanzees (Pan troglodytes) that were tested with the same equipment and near-identical procedures, children aged three to five made apparent inferences using both visual and auditory information, although the youngest children showed the least-developed ability in the auditory modality. However, unlike chimpanzees, children of all ages used causally irrelevant information in a control test designed to examine the possibility that their apparent auditory inferences were the product of contingency learning (the duplicate cups test). Nevertheless, the children's ability to reason by exclusion was corroborated by their performance on a novel verbal disjunctive syllogism test, and we found preliminary evidence consistent with the suggestion that children used their causal-logical understanding to reason by exclusion in the cups task, but subsequently treated the duplicate cups information as symbolic or communicative, rather than causal. Implications for future comparative research are discussed. 2012 APA, all rights reserved

  12. Carbon and environmental footprinting of low carbon UK electricity futures to 2050

    International Nuclear Information System (INIS)

    Alderson, Helen; Cranston, Gemma R.; Hammond, Geoffrey P.

    2012-01-01

    Electricity generation contributes a large proportion of the total greenhouse gas emissions in the United Kingdom (UK), due to the predominant use of fossil fuel (coal and natural gas) combustion for this purpose. A range of future UK energy scenarios has been employed to determine their resulting environmental and carbon footprints. Methodologies have been established to calculate these footprints for the UK electricity supply industry on both a historic timescale and in accordance with the three selected scenarios. The latter scenarios, developed by the UK SUPERGEN Consortium on ‘Highly Distributed Power Systems’ (HDPS), were characterised as ‘Business As Usual’ (BAU), ‘Low Carbon’ (LC) and ‘Deep Green’ (DG) futures, and yielded possible electricity demands out to 2050. It was found that the environmental footprint of the current power network is 41 million (M) global hectares (gha). If future trends follow a ‘Business As Usual’ scenario, then this footprint is observed to fall to about 25 Mgha in 2050. The LC scenario implies an extensive penetration of micro-generators in the home to satisfy heat and power demands. However, these energy requirements are minimised by way of improved insulation of the building fabric and other demand reduction measures. In contrast, the DG scenario presupposes a network where centralised renewable energy technologies – mainly large-scale onshore and offshore wind turbines - have an important role in the power generation. However, both the LC and DG scenarios were found to lead to footprints of less than 4 Mgha by 2050. These latter two scenarios were found to give rise to quite similar trajectories over the period 2010–2050. They are therefore more likely to reflect an effective transition pathway in terms of meeting the 2050 UK CO 2 reduction targets associated with decarbonisation of its power network. However, this appears unlikely to be achieved by 2030–2040 as advocated by the UK Government

  13. Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

    International Nuclear Information System (INIS)

    Newell, Joshua P.; Vos, Robert O.

    2012-01-01

    Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a ‘carbon neutral’ flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products. - Highlights: ► Typical life cycle assessment practice for consumer products often excludes significant land use change emissions when estimating carbon footprints. ► The article provides a methodology to rescale IPCC guidelines for product-level carbon footprints. ► Life cycle inventories and product carbon footprint protocols need more comprehensive land use-related accounting. ► Interdisciplinary collaboration linking the LCA and

  14. Uncertainty Analysis of the Water Scarcity Footprint Based on the AWARE Model Considering Temporal Variations

    Directory of Open Access Journals (Sweden)

    Jong Seok Lee

    2018-03-01

    Full Text Available The purpose of this paper is to compare the degree of uncertainty of the water scarcity footprint using the Monte Carlo statistical method and block bootstrap method. Using the hydrological data of a water drainage basin in Korea, characterization factors based on the available water remaining (AWARE model were obtained. The uncertainties of the water scarcity footprint considering temporal variations in paddy rice production in Korea were estimated. The block bootstrap method gave five-times smaller percentage uncertainty values of the model output compared to that of the two different Monte Carlo statistical method scenarios. Incorrect estimation of the probability distribution of the AWARE characterization factor model is what causes the higher uncertainty in the water scarcity footprint value calculated by the Monte Carlo statistical method in this study. This is because AWARE characterization factor values partly follows discrete distribution with extreme value on one side. Therefore, this study suggests that the block bootstrap method is a better choice in analyzing uncertainty compared to the Monte Carlo statistical method when using the AWARE model to quantify the water scarcity footprint.

  15. Site Selection for the Salt Disposition Facility at the Savannah River Site

    International Nuclear Information System (INIS)

    Gladden, J.B.; Rueter, K.J.; Morin, J.P.

    2000-01-01

    A site selection study was conducted to identify a suitable location for the construction and operation of a new Salt Disposition Facility (SDF) at the Savannah River Site (SRS). The facility to be sited is a single processing facility and support buildings that could house either of three technology alternatives being developed by the High Level Waste Systems Engineering Team: Small Tank Tetraphenylborate Precipitation, Crystalline Silicotitanate Non-Elutable Ion Exchange or Caustic Side Solvent Extraction. A fourth alternative, Direct Disposal in grout, is not part of the site selection study because a location has been identified that is unique to this technology (i.e., Z-Area). Facility site selection at SRS is a formal, documented process that seeks to optimize siting of new facilities with respect to facility-specific engineering requirements, sensitive environmental resources, and applicable regulatory requirements. In this manner, the prime objectives of cost minimization, environmental protection, and regulatory compliance are achieved. The results from this geotechnical characterization indicated that continued consideration be given to Site B for the proposed SDF. Suitable topography, the lack of surface hydrology and floodplain issues, no significant groundwater contamination, the presence of minor soft zones along the northeast portion of footprint, and no apparent geological structure in the Gordon Aquitard support this recommendation

  16. Conceptual basis for the european sustainability footprint

    OpenAIRE

    PELLETIER NATHANIEL; MAAS Rob; GORALCZYK MALGORZATA; WOLF Marc-Andree

    2012-01-01

    Sustainability is central to the policy objectives of the European Commission (EC), but a widely accepted integrated sustainability assessment framework in support of policy analysis and development is currently lacking. Here, we describe the conceptual basis for the proposed European Sustainability Footprint (ESF) - an integrated sustainability assessment framework for establishing a baseline and tracking trends with respect to the sustainability of European production and consumption. This ...

  17. Crystallization and preliminary X-ray crystallographic investigations on a βγ-crystallin domain of absent in melanoma 1 (AIM1), a protein from Homo sapiens

    International Nuclear Information System (INIS)

    Aravind, Penmatsa; Rajini, Bheemreddy; Sharma, Yogendra; Sankaranarayanan, Rajan

    2006-01-01

    The crystallization and preliminary X-ray diffraction analysis of AIM1g1, a βγ-crystallin domain of absent in melanoma (AIM1) protein from H. sapiens, is reported. AIM1g1 is a single βγ-crystallin domain from the protein absent in melanoma 1 (AIM1), which appears to play a role in the suppression of melanomas. This domain is known to bind calcium and its structure would help in identifying calcium-coordinating sites in vertebrate crystallins, which have hitherto been believed to have lost this ability during evolution. Crystallization of this domain was performed by the hanging-drop vapour-diffusion method. Crystals diffracted to a maximum resolution of 1.86 Å and were found to belong to space group P6 1 or P6 5 , with unit-cell parameters a = b = 54.98, c = 59.73 Å. Solvent-content analysis indicated the presence of one monomer per asymmetric unit

  18. Crystallization and preliminary X-ray crystallographic investigations on a βγ-crystallin domain of absent in melanoma 1 (AIM1), a protein from Homo sapiens

    Energy Technology Data Exchange (ETDEWEB)

    Aravind, Penmatsa; Rajini, Bheemreddy; Sharma, Yogendra; Sankaranarayanan, Rajan, E-mail: sankar@ccmb.res.in [Centre for Cellular and Molecular Biology, Uppal Road, Hyderabad 500 007 (India)

    2006-03-01

    The crystallization and preliminary X-ray diffraction analysis of AIM1g1, a βγ-crystallin domain of absent in melanoma (AIM1) protein from H. sapiens, is reported. AIM1g1 is a single βγ-crystallin domain from the protein absent in melanoma 1 (AIM1), which appears to play a role in the suppression of melanomas. This domain is known to bind calcium and its structure would help in identifying calcium-coordinating sites in vertebrate crystallins, which have hitherto been believed to have lost this ability during evolution. Crystallization of this domain was performed by the hanging-drop vapour-diffusion method. Crystals diffracted to a maximum resolution of 1.86 Å and were found to belong to space group P6{sub 1} or P6{sub 5}, with unit-cell parameters a = b = 54.98, c = 59.73 Å. Solvent-content analysis indicated the presence of one monomer per asymmetric unit.

  19. Water footprint of growing vegetables in selected smallholder ...

    African Journals Online (AJOL)

    Crop water footprint (WF) is the volume of fresh water used to produce a certain crop in all the steps in the production line. The CROPWAT model was used to calculate crop evapotranspiration, differentiating green and blue water in Zanyokwe (ZIS), Thabina (TIS) and Tugela Ferry (TFIS) Irrigation Schemes. Green beans ...

  20. Application of the DIY carbon footprint calculator to a wastewater ...

    African Journals Online (AJOL)

    In order to manage the energy budget and develop climate-friendly technological ... step involves the development of strategies to reduce the carbon footprint. ..... Intelligent management systems: aeration of the activated sludge process.

  1. First approach to the Japanese nitrogen footprint model to predict the loss of nitrogen to the environment

    Science.gov (United States)

    Shibata, Hideaki; Cattaneo, Lia R.; Leach, Allison M.; Galloway, James N.

    2014-11-01

    Humans increase the amount of reactive nitrogen (all N species except N2) in the environment through a number of processes, primarily food and energy production. Once in the environment, excess reactive nitrogen may cause a host of various environmental problems. Understanding and controlling individual nitrogen footprints is important for preserving environmental and human health. In this paper we present the per capita nitrogen footprint of Japan. We considered the effect of the international trade of food and feed, and the impact of dietary preferences among different consumer age groups. Our results indicate that the current average per capita N footprint in Japan considering trade is 28.1 kg N capita-1 yr-1. This footprint is dominated by food (25.6 kg N capita-1 yr-1), with the remainder coming from the housing, transportation, and goods and services sectors. The difference in food choices and intake between age groups strongly affected the food N footprint. Younger age groups tend to consume more meat and less fish, which leads to a larger food N footprint (e.g., 27.5 kg N capita-1 yr-1 for ages 20 to 29) than for older age groups (e.g., 23.0 kg N capita-1 yr-1 for ages over 70). The consideration of food and feed imports to Japan reduced the per capita N footprint from 37.0 kg N capita-1 yr-1 to 28.1 kg N capita-1 yr-1. The majority of the imported food had lower virtual N factors (i.e., Nr loss factors for food production), indicating that less N is released to the environment during the respective food production processes. Since Japan relies on imported food (ca. 61%) more than food produced domestically, much of the N losses associated with the food products is released in exporting countries.

  2. Using extant taxa to inform studies of fossil footprints

    Science.gov (United States)

    Falkingham, Peter; Gatesy, Stephen

    2016-04-01

    Attempting to use the fossilized footprints of extinct animals to study their palaeobiology and palaeoecology is notoriously difficult. The inconvenient extinction of the trackmaker makes direct correlation between footprints and foot far from straightforward. However, footprints are the only direct evidence of vertebrate motion recorded in the fossil record, and are potentially a source of data on palaeobiology that cannot be obtained from osteological remains alone. Our interests lie in recovering information about the movements of dinosaurs from their tracks. In particular, the Hitchcock collection of early Jurassic tracks held at the Beneski Museum of Natural History, Amherst, provide a rare look into the 3D form of tracks at and below the surface the animal walked on. Breaking naturally along laminations into 'track books', the specimens present sediment deformation at multiple levels, and in doing so record more of the foot's motion than a single surface might. In order to utilize this rich information source to study the now extinct trackmakers, the process of track formation must be understood at a fundamental level; the interaction of the moving foot and compliant substrate. We used bi-planar X-ray techniques (X-ray Reconstruction of Moving Morphology) to record the limb and foot motions of a Guineafowl traversing both granular and cohesive substrates. This data was supplemented with photogrammetric records of the resultant track surfaces, as well as the motion of metal beads within the sediment, to provide a full experimental dataset of foot and footprint formation. The physical experimental data was used to generate computer simulations of the process using high performance computing and the Discrete Element Method. The resultant simulations showed excellent congruence with reality, and enabled visualization within the sediment volume, and throughout the track-forming process. This physical and virtual experimental set-up has provided major insight into

  3. The success of failed Homo sapiens dispersals out of Africa and into Asia.

    Science.gov (United States)

    Rabett, Ryan J

    2018-02-01

    The evidence for an early dispersal of Homo sapiens from Africa into the Levant during Marine Isotope Stage 5 (MIS-5) 126-74 ka (thousand years ago) was characterized for many years as an 'abortive' expansion: a precursor to a sustained dispersal from which all extant human populations can be traced. Recent archaeological and genetic data from both western and eastern parts of Eurasia and from Australia are starting to challenge that interpretation. This Perspective reviews the current evidence for a scenario where the MIS-5 dispersal encompassed a much greater geographic distribution and temporal duration. The implications of this for tracking and understanding early human dispersal in Southeast Asia specifically are considered, and the validity of measuring dispersal success only through genetic continuity into the present is examined.

  4. The earliest long-distance obsidian transport: Evidence from the ∼200 ka Middle Stone Age Sibilo School Road Site, Baringo, Kenya.

    Science.gov (United States)

    Blegen, Nick

    2017-02-01

    This study presents the earliest evidence of long-distance obsidian transport at the ∼200 ka Sibilo School Road Site (SSRS), an early Middle Stone Age site in the Kapthurin Formation, Kenya. The later Middle Pleistocene of East Africa (130-400 ka) spans significant and interrelated behavioral and biological changes in human evolution including the first appearance of Homo sapiens. Despite the importance of the later Middle Pleistocene, there are relatively few archaeological sites in well-dated contexts (n obsidian transport, important for investigating expansion of intergroup interactions in hominin evolution, is rare from the Middle Pleistocene record of Africa. The SSRS offers a unique contribution to this small but growing dataset. Tephrostratigraphic analysis of tuffs encasing the SSRS provides a minimum age of ∼200 ka for the site. Levallois points and methods of core preparation demonstrate characteristic Middle Stone Age lithic technologies present at the SSRS. A significant portion (43%) of the lithic assemblage is obsidian. The SSRS obsidian comes from three different sources located at distances of 25 km, 140 km and 166 km from the site. The majority of obsidian derives from the farthest source, 166 km to the south of the site. The SSRS thus provides important new evidence that long-distance raw material transport, and the expansion of hominin intergroup interactions that this entails, was a significant feature of hominin behavior ∼200 ka, the time of the first appearance of H. sapiens, and ∼150,000 years before similar behaviors were previously documented in the region. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Carbon footprints of crops from organic and conventional arable crop rotations – using a life cycle assessment approach

    DEFF Research Database (Denmark)

    Knudsen, Marie Trydeman; Meyer-Aurich, A; Olesen, Jørgen E

    2014-01-01

    Many current organic arable agriculture systems are challenged by a dependency on imported livestock manure from conventional agriculture. At the same time organic agriculture aims at being climate friendly. A life cycle assessment is used in this paper to compare the carbon footprints of different....... The results showed significantly lower carbon footprint of the crops from the ‘Biogas’ rotation (assuming that biogas replaces fossil gas) whereas the remaining crop rotations had comparable carbon footprints per kg cash crop. The study showed considerable contributions caused by the green manure crop (grass......-clover) and highlights the importance of analysing the whole crop rotation and including soil carbon changes when estimating carbon footprints of organic crops especially where green manure crops are included....

  6. A global and high-resolution assessment of the green, blue and grey water footprint of wheat

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert

    2010-01-01

    The aim of this study is to estimate the green, blue and grey water footprint of wheat in a spatially-explicit way, both from a production and consumption perspective. The assessment is global and improves upon earlier research by taking a high-resolution approach, estimating the water footprint of

  7. The use of the Podotrack in forensic podiatry for collection and analysis of bare footprints using the Reel method of measurement.

    Science.gov (United States)

    Burrow, J Gordon

    2016-05-01

    This small-scale study examined the role that bare footprint collection and measurement processes have on the Reel method of measurement in forensic podiatry and its use in the Criminal Justice System. Previous research indicated that the Reel method was a valid and reliable measurement system for bare footprint analysis but various collection systems have been used to collect footprint data and both manual and digital measurement processes were utilized in forensic podiatry and other disciplines. This study contributes to the debate about collecting bare footprints; the techniques employed to quantify various Reel measurements and considered whether there was asymmetry between feet and footprints of the same person. An inductive, quantitative paradigm used the Podotrack gathering procedure for footprint collection and the subsequent dynamic footprints subjected to Adobe Photoshop techniques of calculating the Reel linear variables. Statistical analyses using paired-sample t tests were conducted to test hypotheses and compare data sets. Standard error of mean (SEM) showed variation between feet and the findings provide support for the Reel study and measurement method. Copyright © 2016 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

  8. Water Supply Treatment Sustainability of Panching Water Supply Treatment Process - Water Footprint Approach

    Science.gov (United States)

    Aziz, Edriyana A.; Malek, Marlinda Abdul; Moni, Syazwan N.; Zulkifli, Nabil F.; Hadi, Iqmal H.

    2018-03-01

    In many parts of the world, freshwater is scarce and overexploited. The purpose of this study is to determine the water footprint of Water Supply Treatment Process (WSTP) at Panching Water Treatment Plant (WTP) as well as to identify the sustainability of the Sg. Kuantan as an intake resource due to the effect of land use development. The total water footprint (WF) will be calculated by using WF accounting manual. The results obtained shows that the water intake resource is still available but it is believed that it will not be able to cope with the increasing WF. The increment of water demand percentage by 1.8% from 2015 to 2016 has increased 11 times higher of the water footprint percentage, 19.9%. This result shows that the water consumption during the water supply treatment process is two times higher than the demand thus it shows the inefficient of the water management

  9. Accounting for the Ecological Footprint of Materials in Consumer Goods at the Urban Scale

    Directory of Open Access Journals (Sweden)

    William E. Rees

    2013-05-01

    Full Text Available Ecological footprint analysis (EFA can be used by cities to account for their on-going demands on global renewable resources. To date, EFA has not been fully implemented as an urban policy and planning tool in part due to limitations of local data availability. In this paper we focus on the material consumption component of the urban ecological footprint and identify the ‘component, solid waste life cycle assessment approach’ as one that overcomes data limitations by using data many cities regularly collect: municipal, solid waste composition data which serves as a proxy for material consumption. The approach requires energy use and/or carbon dioxide emissions data from process LCA studies as well as agricultural and forest land data for calculation of a material’s ecological footprint conversion value. We reviewed the process LCA literature for twelve materials commonly consumed in cities and determined ecological footprint conversion values for each. We found a limited number of original LCA studies but were able to generate a range of values for each material. Our set of values highlights the importance for cities to identify both the quantities consumed and per unit production impacts of a material. Some materials like textiles and aluminum have high ecological footprints but make up relatively smaller proportions of urban waste streams than products like paper and diapers. Local government use of the solid waste LCA approach helps to clearly identify the ecological loads associated with the waste they manage on behalf of their residents. This direct connection can be used to communicate to citizens about stewardship, recycling and ecologically responsible consumption choices that contribute to urban sustainability.

  10. Mitigating climate change by minimising the carbon footprint and ...

    African Journals Online (AJOL)

    The analysis determines that lower scaled, spatially economical structures using low embodied energy materials will positively contribute to reduced carbon footprints and thus climate change mitigation strategies. The outcomes of the article also set a benchmark for prospective life-cycle assessments (LCA) and establish ...

  11. Burning water: The water footprint of biofuel-based transport

    NARCIS (Netherlands)

    Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

    2010-01-01

    The trend towards substitution of conventional transport fuels by biofuels requires additional water. The EU aims to replace 10 percent of total transport fuels by biofuels by 2020. This study calculates the water footprint (WF) of different transport modes using bio-ethanol, biodiesel or

  12. Environmental footprints show China and Europe’s evolving resource appropriation for soybean production in Mato Grosso, Brazil

    International Nuclear Information System (INIS)

    Lathuillière, Michael J; Johnson, Mark S; Galford, Gillian L; Couto, Eduardo G

    2014-01-01

    Mato Grosso has become the center of Brazil’s soybean industry, with production located across an agricultural frontier expanding into savanna and rainforest biomes. We present environmental footprints of soybean production in Mato Grosso and resource flows accompanying exports to China and Europe for the 2000s using five indicators: deforestation, land footprint (LF), carbon footprint (CF), water footprint (WF), and nutrient footprints. Soybean production was associated with 65% of the state’s deforestation, and 14–17% of total Brazilian land use change carbon emissions. The decade showed two distinct production systems illustrated by resources used in the first and second half of the decade. Deforestation and carbon footprint declined 70% while land, water, and nutrient footprints increased almost 30% between the two periods. These differences coincided with a shift in Mato Grosso’s export destination. Between 2006 and 2010, China surpassed Europe in soybean imports when production was associated with 97 m 2 deforestation yr −1 ton −1 of soybean, a LF of 0.34 ha yr −1 ton −1 , a carbon footprint of 4.6 ton CO 2 -eq yr −1 ton −1 , a WF of 1908 m 3 yr −1 ton −1 , and virtual phosphorous and potassium of 5.0 kg P yr −1 ton −1 and 0.0042 g K yr −1 ton −1 . Mato Grosso constructs soil fertility via phosphorous and potassium fertilizer sourced from third party countries and imported into the region. Through the soybean produced, Mato Grosso then exports both water derived from its abundant, seasonal precipitation and nutrients obtained from fertilizer. In 2010, virtual water flows were 10.3 km 3 yr −1 to China and 4.1 km 3 yr −1 to Europe. The total embedded nutrient flows to China were 2.12 Mtons yr −1 and 2.85 Mtons yr −1 to Europe. As soybean production grows with global demand, the role of Mato Grosso’s resource use and production vulnerabilities highlight the challenges with meeting future international food security needs

  13. Secretagogue stimulation of neurosecretory cells elicits filopodial extensions uncovering new functional release sites.

    Science.gov (United States)

    Papadopulos, Andreas; Martin, Sally; Tomatis, Vanesa M; Gormal, Rachel S; Meunier, Frederic A

    2013-12-04

    Regulated exocytosis in neurosecretory cells relies on the timely fusion of secretory granules (SGs) with the plasma membrane. Secretagogue stimulation leads to an enlargement of the cell footprint (surface area in contact with the coverslip), an effect previously attributed to exocytic fusion of SGs with the plasma membrane. Using total internal reflection fluorescence microscopy, we reveal the formation of filopodia-like structures in bovine chromaffin and PC12 cells driving the footprint expansion, suggesting the involvement of cortical actin network remodeling in this process. Using exocytosis-incompetent PC12 cells, we demonstrate that footprint enlargement is largely independent of SG fusion, suggesting that vesicular exocytic fusion plays a relatively minor role in filopodial expansion. The footprint periphery, including filopodia, undergoes extensive F-actin remodeling, an effect abolished by the actomyosin inhibitors cytochalasin D and blebbistatin. Imaging of both Lifeact-GFP and the SG marker protein neuropeptide Y-mCherry reveals that SGs actively translocate along newly forming actin tracks before undergoing fusion. Together, these data demonstrate that neurosecretory cells regulate the number of SGs undergoing exocytosis during sustained stimulation by controlling vesicular mobilization and translocation to the plasma membrane through actin remodeling. Such remodeling facilitates the de novo formation of fusion sites.

  14. Computers and the Environment: Minimizing the Carbon Footprint

    Science.gov (United States)

    Kaestner, Rich

    2009-01-01

    Computers can be good and bad for the environment; one can maximize the good and minimize the bad. When dealing with environmental issues, it's difficult to ignore the computing infrastructure. With an operations carbon footprint equal to the airline industry's, computer energy use is only part of the problem; everyone is also dealing with the use…

  15. Food security and ecological footprint of chittagong hill tracts in bangladesh

    International Nuclear Information System (INIS)

    Bala, B.K.; Hossain, M.A.

    2014-01-01

    This paper presents food security and ecological footprint of the Chittagong Hill Tracts (CHT) in Bangladesh. To estimate food security and ecological footprint, primary and secondary data were collected and a multistage sampling was designed for selecting the farm households from the three districts of the Hill Tracts of Chittagong. A quantitative method for computation of food security was used. To estimate the environmental sustainability sustainability as upazila (sub-district) levels, a method of computation of ecological footprint developed by Wackernagel was used. Multiple logistic regression models were fitted to data on food security of the farmers in CHT to identify the factors affecting food security at household levels in CHT. Overall status of food security at upazila levels was found to be good for all the upazilas except Rangamati sadar and the best was found Alikadam. Environmental status in the Hill Tracts of Chittagong was poor for all the upazilas. Household food security was found to be significantly (p<0.05) affected by farm size, education, professions, crops cultivated (jhum and tobacco), distance from market and transition from jhum to horticulture. This study supports transition from jhum to horticulture crops for increased food security and banning tobacco cultivation to avoid deforestation in CHT. (author)

  16. Fracture of the delivery balloon shaft during balloon-expandable prosthesis alignment during implantation of an Edwards SAPIEN 3.

    Science.gov (United States)

    Arai, Takahide; Hovasse, Thomas; Chevalier, Bernard

    2018-04-01

    The expandable sheath was designed with a lower profile in order to reduce the incidence of vascular complications of transcatheter aortic valve implantation using transfemoral approach. However, once the prosthesis has crossed the sheath, it could be difficult to retrieve it from the body. This is the first case of successful bail-out in an instance of delivery balloon shaft malfunction subsequent to the crossing of an expandable sheath during implantation of an Edwards SAPIEN 3 prosthesis. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  17. Antagonism in the carbon footprint between beef and dairy ...

    African Journals Online (AJOL)

    The higher increase in production (milk) of intensive dairy cows, compared to the increase in production (calf weight) of intensive beef cows, explains the antagonism in the carbon footprint between different beef and dairy production systems. Unfortunately, carbon sequestration estimates have been neglected and thus the ...

  18. Reliability and Validity of the Footprint Assessment Method Using Photoshop CS5 Software.

    Science.gov (United States)

    Gutiérrez-Vilahú, Lourdes; Massó-Ortigosa, Núria; Costa-Tutusaus, Lluís; Guerra-Balic, Myriam

    2015-05-01

    Several sophisticated methods of footprint analysis currently exist. However, it is sometimes useful to apply standard measurement methods of recognized evidence with an easy and quick application. We sought to assess the reliability and validity of a new method of footprint assessment in a healthy population using Photoshop CS5 software (Adobe Systems Inc, San Jose, California). Forty-two footprints, corresponding to 21 healthy individuals (11 men with a mean ± SD age of 20.45 ± 2.16 years and 10 women with a mean ± SD age of 20.00 ± 1.70 years) were analyzed. Footprints were recorded in static bipedal standing position using optical podography and digital photography. Three trials for each participant were performed. The Hernández-Corvo, Chippaux-Smirak, and Staheli indices and the Clarke angle were calculated by manual method and by computerized method using Photoshop CS5 software. Test-retest was used to determine reliability. Validity was obtained by intraclass correlation coefficient (ICC). The reliability test for all of the indices showed high values (ICC, 0.98-0.99). Moreover, the validity test clearly showed no difference between techniques (ICC, 0.99-1). The reliability and validity of a method to measure, assess, and record the podometric indices using Photoshop CS5 software has been demonstrated. This provides a quick and accurate tool useful for the digital recording of morphostatic foot study parameters and their control.

  19. Marine Ecological Footprint of Italian Mediterranean Fisheries

    Directory of Open Access Journals (Sweden)

    Federica de Leo

    2014-10-01

    Full Text Available The capacity of marine and coastal ecosystems to sustain seafood production and consumption is seldom accounted for and is not included in the signals that guide economic development. In this article, we review estimates of marine and coastal areas aimed at sustaining catches for seafood consumption. The aim of this paper is the assessment of the interactions between the environment, intended as a set of ecological subsystems in natural equilibrium, including the marine ecosystem, and the process of fisheries systems. In particular we analyze fisheries in Italy, which is the third biggest economy and the greatest consumer of seafood in the Eurozone, conducting an in-depth analysis of the Marine Ecological Footprint (MEF that evaluates the marine ecosystem area exploited by human populations to supply seafood and other marine products and services. The positioning of Italian fisheries shows a level of sustainability next to the threshold value. The analysis in the present study highlights the importance of absolute indicators in providing rough estimates about human dependence on ecological systems and recognizes the importance of those indicators, such as the Marine Footprint (expressed in % of Primary Production Required/Primary Production, in ensuring a high level of precision and accuracy in quantifying human activity impact on the environment.

  20. Estimating Biofuel Feedstock Water Footprints Using System Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Inman, Daniel; Warner, Ethan; Stright, Dana; Macknick, Jordan; Peck, Corey

    2016-07-01

    Increased biofuel production has prompted concerns about the environmental tradeoffs of biofuels compared to petroleum-based fuels. Biofuel production in general, and feedstock production in particular, is under increased scrutiny. Water footprinting (measuring direct and indirect water use) has been proposed as one measure to evaluate water use in the context of concerns about depleting rural water supplies through activities such as irrigation for large-scale agriculture. Water footprinting literature has often been limited in one or more key aspects: complete assessment across multiple water stocks (e.g., vadose zone, surface, and ground water stocks), geographical resolution of data, consistent representation of many feedstocks, and flexibility to perform scenario analysis. We developed a model called BioSpatial H2O using a system dynamics modeling and database framework. BioSpatial H2O could be used to consistently evaluate the complete water footprints of multiple biomass feedstocks at high geospatial resolutions. BioSpatial H2O has the flexibility to perform simultaneous scenario analysis of current and potential future crops under alternative yield and climate conditions. In this proof-of-concept paper, we modeled corn grain (Zea mays L.) and soybeans (Glycine max) under current conditions as illustrative results. BioSpatial H2O links to a unique database that houses annual spatially explicit climate, soil, and plant physiological data. Parameters from the database are used as inputs to our system dynamics model for estimating annual crop water requirements using daily time steps. Based on our review of the literature, estimated green water footprints are comparable to other modeled results, suggesting that BioSpatial H2O is computationally sound for future scenario analysis. Our modeling framework builds on previous water use analyses to provide a platform for scenario-based assessment. BioSpatial H2O's system dynamics is a flexible and user