WorldWideScience

Sample records for sanyo technical review

  1. Sanyo Technical Review, Vol 28, No. 1, April 1996. Special issue on components and devices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    ;Contents: The Present and Future of the Key Components and Devices; PC-NTSC Scan Converter LSI; A Single-Chip video CD Decorder LSI; Digital Audio QPSK Demodulator LSI for Television Broadcasting by Satellite; Single Chip Microcomputer with Flash Electrical Erasable Progammable Read Only Memory; High-Element-Density Bipolar Process `VHF-IV`; Energy-Saving, High-Efficiency Audio Amplifer Hybrid IC STK426-000 Series; High-Breakdown-Voltage, High-Frequency Si Bipolar Transistors; 1.5-Megapixel Poly-Si TFT-LCD Module with a Fully Integrated Driving Circuit; LCD Color Filter Process Using Film Resist; Giant Magnetoresistance Materials for Ultra-high Density Magnetic Recording Heads; New-Type Crystalline Sollar Cell-Hit Structure; Hydrogen-Absorbing Alloy for Portable Fuel Cell; Prismatic Lithium Ion Battery; Rotary Compressor Using a Rare-Earth Magnet Brushless Motor; Surround LSI Using 1.6 micrometers BiCMOS Process; MR Head for HDD; RF-SAW Filter for Digtal AMPS; Capability of High-speed Back-up of OS-CON; and Lubricants and Material for Sliding Parts in Rotary Compressor for HFC Refrigerants.

  2. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  3. Professional Trajectory of Engineers in the Maquiladora Electronics Industry: The Case of Sanyo Video Components

    Directory of Open Access Journals (Sweden)

    María Ruth Vargas Leyva

    2000-11-01

    Full Text Available This is a study of the career trajectories of engineers in the company Sanyo Video Components. Three stages in the development of the professional career are recognized: initial career stage, mid-career and late stage career. Results indicate that the career’s trajectory is internally determined by the area of career development and job hierarchy. In external mobility, there are limitations of individual and family type; those of an individual type are age and area of career development; those of a family type are civil state, spouse’s occupation and the presence and number of children. The results of other studies are confirmed in relation to the engineers’ practical training in the business, based on the initial career stage, the step from the technical dimension to the administrative, and the decrease in promotion potential which comes with age, as well as the professional conversion process of engineers who have various types of professional training.

  4. Engineering Technical Review Planning Briefing

    Science.gov (United States)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  5. Mechanical engineering department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  6. Mechanical Engineering Department Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  7. Mechanical Engineering Department. Technical review

    Energy Technology Data Exchange (ETDEWEB)

    Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  8. 49 CFR 552.6 - Technical review.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together...

  9. The Software Technical Review Process

    Science.gov (United States)

    1988-06-01

    section differentiates between formal and informal sistent manner in which every developer has their reviews. These terms are ill-defined and must be...cited. SEI-CM-3-1.5 13 The Software Technical Review Process Remus79 Eng. SE-JO, 1 (Jan. 1984), 68-72. Remus, H., and S. Zilles . "Prediction and Manage...34 Fourth International Conference on Software equation in a project management system. There Engineering. Silver Spring, MD: IEEE Computer are several

  10. Mechanical Engineering Department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.)

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  11. Humanitarian Assistance in Syria Analysis Technical Review

    Science.gov (United States)

    2014-12-01

    TRAC-M-TM-15-012 December 2014 Humanitarian Assistance in Syria Analysis Technical Review TRADOC Analysis...INTENTIONALLY LEFT BLANK TRAC-M-TM-14- December 2014 Humanitarian Assistance in Syria Analysis Technical Review Author Mr...2014 3. REPORT TYPE AND DATES COVERED Technical Memorandum, July 2014 to October 2014 4. TITLE AND SUBTITLE Humanitarian Assistance in Syria Analysis

  12. Guidelines for technical reviews of software products

    Energy Technology Data Exchange (ETDEWEB)

    Wilburn, N.P.

    1982-03-01

    A guideline is given for technical review of products developed during a software life cycle. Purposes and benefits of reviews are given. Varieties of reviews, when they should take place, roles of the reviewers and products of the review are described.

  13. Professional Trajectory of Engineers in the Maquiladora Electronics Industry: The Case of Sanyo Video Components

    OpenAIRE

    María Ruth Vargas Leyva

    2000-01-01

    This is a study of the career trajectories of engineers in the company Sanyo Video Components. Three stages in the development of the professional career are recognized: initial career stage, mid-career and late stage career. Results indicate that the career’s trajectory is internally determined by the area of career development and job hierarchy. In external mobility, there are limitations of individual and family type; those of an individual type are age and area of career developmen...

  14. Monitoring and Technical Assistance Review System Notebook

    Science.gov (United States)

    Administration for Children & Families, 2008

    2008-01-01

    This notebook provides guidance on the Monitoring and Technical Assistance Review System (MTARS). The manual is intended for use by Administration on Developmental Disabilities (ADD) staff who manage MTARS and by MTARS reviewers who conduct site visit activities. The notebook is also designed to help Councils, Protection and Advocacy Systems, and…

  15. HIT-Sanyo: Revolutionary technology, what is the truth and what a hoax? New technology from Japan tested in Germany; ''Sanyo-HIT: Revolutionaere Technik oder mehr Schein als Sein?''. Neue Technik aus Japan in Deutschland erprobt

    Energy Technology Data Exchange (ETDEWEB)

    Rust, T. [Atmosphaere GmbH, Laatzen (Germany); Kohake, D. [Fachhochschule Gelsenkirchen (Germany). Fachbereich Elektrotechnik; Rossner, M. [Fachhochschule Coburg (Germany). Fachbereich Elektrotechnik und Informatik

    2004-07-01

    The new modules from Japanese manufacturer Sanyo with the HIT-Technology are supposed to have the worlds best efficiency. In addition the manufacturer claims that by the HIT-Technology the modules supply more energy output compared to conventional crystalline solar modules. This article tries to prove these statements by outdoor investigation. Measurements of one grid connected system, which contains Sanyo, Kyocera and Ersol modules, show that Sanyo modules have at least 7% more energy output than the other modules. DC-measurements at Sanyo and BP modules even prove that due to the low temperature coefficient the Sanyo modules cope better with high cell temperatures compared to the BP ones. In addition the inspection sheets given by Sanyo seem to contain lower power data than determined in field measurements which may be caused by the different spectral consistence of the test light in Japan. The data collected during the second half of 2003 reveals that systems with Sanyo modules can provide 7% and more plus of energy output than systems with other well-known modules. Nevertheless it will be interesting to gather long time data of plants with Sanyo modules in order to achieve a statement of how the energy output evolves during the period of at least one year. (orig.)

  16. Not Quite Easy to Win MOFCOM's Nod——On MOFCOM Conditionally Clearing Proposed Acquisition of Sanyo by Panasonic

    Institute of Scientific and Technical Information of China (English)

    Liang Tao

    2009-01-01

    @@ On October 30,2009,Ministry of Commerce of the PRC("MOFCOM"),a ministry directly under the State Council of China in charge of merger control,issued an announcement to clear the acquisition of Sanyo by Panasonic subject to conditions.

  17. 77 FR 49443 - Decision and Order Granting a Waiver to Sanyo From the Department of Energy Residential...

    Science.gov (United States)

    2012-08-16

    ... test and rate its hybrid wine chiller/beverage center basic models using an alternate test procedure... hybrid wine chiller/beverage center, provided that Sanyo tests and rates such products using the..., as codified) established the Energy Conservation Program for Consumer Products Other Than Automobiles...

  18. 77 FR 19654 - Notice of Petition for Waiver of Sanyo E&E Corporation from the Department of Energy Residential...

    Science.gov (United States)

    2012-04-02

    ... refrigerators and refrigerator-freezers. The waiver request pertains to the hybrid wine chiller/beverage center... for Consumer Products Other Than Automobiles, a program covering most major household appliances... A1. Sanyo is requesting a waiver with respect to the test procedures for its hybrid models that...

  19. Independent technical review of the Pinellas Plant

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This report documents an Independent Technical Review (ITR) of facilities, organizations, plans, activities and various other elements required to successfully transition the Pinellas Plant from Defense Program (DP) funded operation to either community developed reuse or safe deactivation leading to decontamination and decommissioning (D&D). The review was conducted at the request of the Department of Energy (DOE) Deputy Assistant Secretary for Facility Transition and Management (EM-60) and is a consensus of the nine member ITR Team.

  20. Book Review: New Perspectives on Technical Editing

    Science.gov (United States)

    Murphy, A. J. (Ed.); Sterken, Christiaan

    2012-08-01

    New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

  1. Using Cloud for Research: A Technical Review

    OpenAIRE

    Chen, Xiaoyu; Wills, Gary; Gilbert, Lester; Bacigalupo, David

    2010-01-01

    The purpose of the TeciRes project was to conduct a technical review of the current landscape within cloud computing to establish the extent to which existing solutions meet encountered and envisioned requirements for using emerging cloud technologies, in particular those which enable computing and storage cloud facilities for research in Higher Education (HE) institutions, and to make recommendations on further development, guidance, and standardisation. The TeciRes project is one of three p...

  2. Looking for a new HIT. Sanyo's patents for the HIT technology has expired, and competitors hope for new profits; Suche nach dem neuen HIT. Sanyos Patente fuer die HIT-Technologie sind ausgelaufen, die Konkurrenz frohlockt

    Energy Technology Data Exchange (ETDEWEB)

    Chunduri, Shravan K.; Haase, Christian

    2010-11-15

    With their hybrid cells, Sanyo Electric Co. Ltd. had covered a solar niche market. The HIT technology offers high efficiency at low production cost. Now, however, the most relevant patents of the Japanese producer have expired, and competitors working on similar concepts are out for their chance. For example, Swiss manufacturer Roth and Rau have been taking orders for turnkey hybrid cell production from January 2011. (orig.)

  3. Independent technical review of the Mound Plant

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This report documents an Independent Technical Review (ITR) of the facilities, organizations, plans, and activities required to transition particular elements of the Mound Plant from Defense Program (DP) funded operation as appropriate either to community developed reuse or safe deactivation leading to decontamination and decommissioning (D&D). The review was conducted at the request of the Dr. Willis Bixby, Deputy Assistant Secretary, U.S. Department of Energy EM-60, Office of Facility Transition and Management and is a consensus of the nine member ITR Team. Information for the review was drawn from documents provided to the ITR Team by the Miamisburg Area Office (MB) of the DOE, EG&G, the City of Miamisburg, and others; and from presentations, discussions, interviews, and facility inspections at the Mound Plant during the weeks of March 14 and March 28, 1994. During the week of April 25, 1994, the ITR Team met at Los Alamos, New Mexico to develop consensus recommendations. A presentation of the core recommendations was made at the Mound Plant on May 5, 1994. This is an independent assessment of information available to, and used by, the Mound Plant personnel. Repetition of the information is not meant to imply discovery by the ITR Team. Team members, however, acting as independent reviewers, frequently assess the information from a perspective that differs significantly from that of the Mound Plant personnel. The report is based on information obtained and conditions observed during the March 1994 review interval. The ITR process and normal site work often initiate rapid, beneficial changes in understanding and organization immediately following the review. These changes frequently alter conditions observed during the review, but the report does not address changes subsequent to the review interval.

  4. Assessing scrub practitioner non-technical skills: a literature review.

    Science.gov (United States)

    McClelland, Guy

    2015-01-01

    A review by Catchpole et al (2009) into the causes and types of harm experienced by the surgical patient emphasised the high risk nature of the perioperative period. Investigations into recent failures at NHS organisations have emphasised the relevance of non-technical skills education in improving clinical performance and patient outcomes. However, scrub practitioner non-technical skills are often developed on a tacit basis, making assessment of performance difficult. This literature review identifies strategies that facilitate assessment of non-technical skills during surgery. Recommendations are made that will assist scrub practitioners in using a validated scrub practitioner non-technical skills assessment framework reliably.

  5. Tanks Focus Area FY98 midyear technical review

    Energy Technology Data Exchange (ETDEWEB)

    Schlahta, S.N.; Brouns, T.M.

    1998-06-01

    The Tanks Focus Area (TFA) serves as the DOE`s Office of Environmental Management`s national technology and solution development program for radioactive waste tank remediation. Its technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank with safety integrated into all the functions. In total, 17 technologies and technical solutions were selected for review. The purpose of each review was to understand the state of development of each technology selected for review and to identify issues to be resolved before the technology or technical solution progressed to the next level of maturity. The reviewers provided detailed technical and programmatic recommendations and comments. The disposition of these recommendations and comments and their impact on the program is documented in this report.

  6. Technical Embroidery for Smart Textiles: Review

    OpenAIRE

    Mecnika, Viktorija; Hoerr, Melanie; Krievins, Ivars; Jockenhoevel, Stefan; Gries, Thomas

    2015-01-01

    Traditionally embroidery is known as a conventional technique of textile decoration. Since the niche of technical textiles is rapidly expanding and is the main field of innovation and research in textile and apparel industry, embroidery is found in a variety of new functional applications due to the unique opportunity of creating three-dimensional light-weight structures and laying threads on the base material in all directions. As the field of smart textiles is vast per se and is associated ...

  7. Technical Embroidery for Smart Textiles: Review

    OpenAIRE

    Mečņika, V; Hoerr, M.; Krieviņš, I; Jockenhoevel, S.; Gries, T.

    2014-01-01

    Traditionally embroidery is known as a conventional technique of textile decoration. Since the niche of technical textiles is rapidly expanding and is the main field of innovation and research in textile and apparel industry, embroidery is found in a variety of new functional applications due to the unique opportunity of creating three-dimensional light-weight structures and laying threads on the base material in all directions. As the field of smart textiles is vast per se and is associated ...

  8. Soft Controls: Technical Basis and Human Factors Review Guidance

    Science.gov (United States)

    2000-03-01

    Controlling Office is (insert controlling DoD office). NUREG /CR-6635 BNL- NUREG -52565 Soft Controls: Technical Basis and Human Factors Review Guidance...DC 20555-0001 AVAILABILITY NOTICE Availability of Reference Materials Cited in NRC Publications NRC publications in the NUREG series, NRC regu...Technical Information Service Springfield, VA 22161 -0002 <http://www.ntis.gov> 1 -800-553-6847 or locally 703-605-6000 The NUREG series

  9. Burgos Wind Farm Project : The Philippines Technical Desk Review

    OpenAIRE

    Cronin, Tom; Clausen, Niels-Erik; Nielsen, Morten; Jørgensen, Erik

    2012-01-01

    This report presents the findings of a review carried out by Riso National Laboratory of a 30MW wind farm in Northern Luzon, The Philippines. The review was commissioned by the World Bank and is intended as a brief second opinion desk review of the technical, contractual and financial aspects of the project. The evaluation of the Annual Energy Production of the site by PNOC-EDC seems to fo...

  10. Alcohol Fuels Program technical review, Spring 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    The alcohol fuels program consists of in-house and subcontracted research for the conversion of lignocellulosic biomass into fuel alcohols via thermoconversion and bioconversion technologies. In the thermoconversion area, the SERI gasifier has been operated on a one-ton per day scale and produces a clean, medium-Btu gas that can be used to manufacture methanol with a relatively small gas-water shift reaction requirement. Recent research has produced catalysts that make methanol and a mixture of higher alcohols from the biomass-derived synthetic gas. Three hydrolysis processes have emerged as candidates for more focused research. They are: a high-temperature, dilute-acid, plug-flow approach based on the Dartmouth reactor; steam explosion pretreatment followed by hydrolysis using the RUT-C30 fungal organism; and direct microbial conversion of the cellulose to ethanol using bacteria in a single or mixed culture. Modeling studies, including parametric and sensitivity analyses, have recently been completed. The results of these studies will lead to a better definition of the present state-of-the-art for these processes and provide a framework for establishing the research and process engineering issues that still need resolution. In addition to these modeling studies, economic feasibility studies are being carried out by commercial engineering firms. Their results will supplement and add commercial validity to the program results. The feasibility contractors will provide input at two levels: Technical and economic assessment of the current state-of-the-art in alcohol production from lignocellulosic biomass via thermoconversion to produce methanol and higher alcohol mixtures and bioconversion to produce ethanol; and identification of research areas having the potential to significantly reduce the cost of production of alcohols.

  11. WIND ENERGY CONVERSION SYSTEMS - A TECHNICAL REVIEW

    Directory of Open Access Journals (Sweden)

    N. RAMESH BABU

    2013-08-01

    Full Text Available Wind power production has been under the main focus for the past decade in power production and tremendous amount of research work is going on renewable energy, specifically on wind power extraction. Wind power provides an eco-friendly power generation and helps to meet the national energy demand when there is a diminishing trend in terms of non-renewable resources. This paper reviews the modeling of Wind Energy Conversion Systems (WECS, control strategies of controllers and various Maximum Power Point Tracking (MPPT technologies that are being proposed for efficient production of wind energy from the available resource.

  12. Technical review of entrained design report

    Energy Technology Data Exchange (ETDEWEB)

    Bowser, R.P.; Clark, W.B.; Griffin, J.F.; Kesling, W.E.; Kissner, T.J.; Krach, F.G.; Metcalf, L.W.; Park, W.K.; Wurstner, R.P.

    1979-12-14

    Morgantown Energy Technology Center (METC) is planning to expand its in-house coal gasification R&D capabilities by installing a research facility that can address a number of concepts including entrained, fluid bed, and catalytic gasification and flash pyrolysis. This Advanced Gasification Concepts (AGC) facility design, as it currently stands, includes piping and instrumentation diagrams, vessel drawings and specifications, instrumentation lists and specifications, and equipment layout and isometric drawings. Before the design is finalized, a critique is needed to ensure that the intended flexibility and objectives can be met. The design approach was evaluated to determine whether the present design will meet the research objectives, including the need for flexibility. Heat and material balances, critical velocity requirements, vessel arrangements, potential operational problems, and instrumentation were reviewed. The mechanical design review included a critique of the drawings and specifications, adherence to standards and codes, materials of construction, vessels, piping, valves, heaters, and fittings. In addition, utilities requirements, heat transfer and particulate removal calculations, and pumping and heat exchanger requirements were checked. An evaluation of the equipment cost includes a critique of the reliability of the equipment cost breakdown, the areas of cost uncertainty, and the areas for potential cost savings. A safety analysis is also provided.

  13. Technical review of Molten Salt Oxidation

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    The process was reviewed for destruction of mixed low-level radioactive waste. Results: extensive development work and scaleup has been documented on coal gasification and hazardous waste which forms a strong experience base for this MSO process; it is clearly applicable to DOE wastes such as organic liquids and low-ash wastes. It also has potential for processing difficult-to-treat wastes such as nuclear grade graphite and TBP, and it may be suitable for other problem waste streams such as sodium metal. MSO operating systems may be constructed in relatively small units for small quantity generators. Public perceptions could be favorable if acceptable performance data are presented fairly; MSO will likely require compliance with regulations for incineration. Use of MSO for offgas treatment may be complicated by salt carryover. Figs, tabs, refs.

  14. Integrating e-Learning in Technical and Vocational Education: A Technical Review

    Directory of Open Access Journals (Sweden)

    Muhammad Bappa-Aliyu

    2012-05-01

    Full Text Available Vocational and Technical Education (VTE is one of the manpower development programmes of study that is attracting the attention of various countries around the world. This quality equally qualifies it to be seen as the only programme that tackles the menace of poverty and create employment skills. Therefore, deployment of Information and Communication Technologies (ICTs in teaching and learning (e-learning of VTE courses is paramount and should be given priority. Despite the availability of studies on the use of e-learning in technical and engineering education related areas, there are quite few studies on the integration of e-learning as a tool/environment for disseminating hands-on TVE courses, which this present paper attempted to highlight. Specifically, this paper reviewed technical literature on e-learning in the context of TVE, the benefits of integrating e-learning in TVE and some challenges that could serve as a barrier toward the successful integration of e-learning in TVE. Related studies on e-learning, journal articles, opinion papers, conceptual papers, etc, were analysed to contents related to integration of e-learning in TVE or related subjects were extracted to form this paper. It was concluded that e-learning is so significant that no any TVE programme can afford to neglect, thereby recommending its full implementation in all areas of TVE and practically oriented courses.

  15. Proceedings of the 24th NSRR technical review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Uetsuka, Hiroshi; Fuketa, Toyoshi; Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2001-09-01

    The 24th NSRR Technical Review Meeting was held at Tranomon Pastoral, Tokyo, on November 13 and 14, 2000. The purpose of the meeting was to present and discuss the recent progress of the NSRR program and other LWR fuel safety researches at JAERI. Twenty-one papers, including five by foreign institutes, were presented and discussed regarding fuel behavior during normal operation, reactivity initiated accident (RIA) and loss-of-coolant accident (LOCA) and FP release behavior during severe accident. The meeting was a great help in planning future research and promoting research cooperation. This proceeding contains the papers presented in the meeting. (author)

  16. Technical Review Board Chairperson Guidelines for Conducting Technical Review Boards for Rocket Testing

    Science.gov (United States)

    2011-08-17

    database with the boxes checked for full text documents only and scholarly journals, including peer-reviewed. Searches were performed using the following...ahead of full -scale development. It is the laboratories innovative science and technology program that is the key to providing an affordable...contributed to the success of the Saturn 5, Space Shuttle, Atlas, Titan, Minuteman, and Peacekeeper programs to name a few. With a tradition of success on

  17. Terahertz planar antennas for future wireless communication: A technical review

    Science.gov (United States)

    Jha, Kumud Ranjan; Singh, G.

    2013-09-01

    With the monotonic increasing demand of the higher bandwidth for the next generation wireless communication system, the extension of the operating frequency of the communication system to the millimeter/Terahertz wave regime of the electromagnetic spectrum where several low-attenuation windows exist is inevitable. However, before the commercial implementation of the wireless communication in these low-attenuation windows, there are various obstacles which need to be addressed by the scientists and researchers. The atmospheric path loss is the main obstacle to the full-fledged implementation of the terahertz wireless communication. The remedy to this problem is the use of high-power sources, efficient detectors and high gain antenna systems. This paper reviews these technical issues with the special attention to the planar antennas which might contribute to the compact, inexpensive, and low profile future terahertz wireless communication system design.

  18. Independent Technical Review of the X-740 Groundwater Remedy, Portsmouth, Ohio: Technical Evaluation and Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Rhia, B.; Jackson, D.; Eddy-Dilek, C.

    2010-04-30

    Energy Office of Environmental Management (EM-32) to provide an independent technical panel to review previous and ongoing remedial activities designed to address TCE contamination in groundwater at X-740. In 1999, a corrective action was implemented at X-740 to address contamination in the groundwater. The DOE planted poplar trees over 2.6 acres of the groundwater plume. After several years of groundwater monitoring, the results indicated that the benefits of phytoremediation were limited and insufficient to meet remedial objectives. In 2007, an alternative remedial strategy based on in situ oxidative treatment was negotiated with Ohio EPA. During FY2008, three treatment phases of chemical oxidation were completed. The general charter for the independent technical review team is to review the results of s previous and ongoing remedial actions to determine whether the current strategy will be effective in meeting the end points specified in the regulatory work plan.

  19. A COMPREHENSIVE TECHNICAL REVIEW OF THE DEMONSTRATION BULK VITRIFICATION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    SCHAUS, P.S.

    2006-09-29

    In May 2006, CH2M Hill Hanford Group, Inc. chartered an Expert Review Panel (ERP) to review the current status of the Demonstration Bulk Vitrification System (DBVS). It is the consensus of the ERP that bulk vitrification is a technology that requires further development and evaluation to determine its potential for meeting the Hanford waste stabilization mission. No fatal flaws (issues that would jeopardize the overall DBVS mission that cannot be mitigated) were found, given the current state of the project. However, a number of technical issues were found that could significantly affect the project's ability to meet its overall mission as stated in the project ''Justification of Mission Need'' document, if not satisfactorily resolved. The ERP recognizes that the project has changed from an accelerated schedule demonstration project to a formally chartered project that must be in full compliance with DOE 413.3 requirements. The perspective of the ERP presented herein, is measured against the formally chartered project as stated in the approved Justification of Mission Need document. A justification of Mission Need document was approved in July 2006 which defined the objectives for the DBVS Project. In this document, DOE concluded that bulk vitrification is a viable technology that requires additional development to determine its potential applicability to treatment of a portion of the Hanford low activity waste. The DBVS mission need statement now includes the following primary objectives: (1) process approximately 190,000 gallons of Tank S-109 waste into fifty 100 metric ton boxes of vitrified product; (2) store and dispose of these boxes at Hanford's Integrated Disposal Facility (IDF); (3) evaluate the waste form characteristics; (4) gather pilot plant operability data, and (5) develop the overall life cycle system performance of bulk vitrification and produce a comparison of the bulk vitrification process to building a second LAW

  20. Typing of Methicillin resistant Staphylococcus aureus: A technical review

    Directory of Open Access Journals (Sweden)

    P L Mehndiratta

    2012-01-01

    Full Text Available Increasing prevalence of Methicillin-resistant Staphylococcus aureus (MRSA worldwide is a growing public health concern. MRSA typing is an essential component of an effective surveillance system to describe epidemiological trends and infection control strategies. Current challenges for MRSA typing are focused on selecting the most appropriate technique in terms of efficiency, reliability, ease of performance and cost involved. This review summarises the available information on application, potential and problems of various typing techniques in discriminating the strains and understanding the epidemiology of MRSA strains. The phenotypic methods in general are easier to perform, easier to interpret, cost effective and are widely available, however less discriminatory. The genotypic methods are expensive and technically demanding, however more discriminatory. Newer technologies involving sequencing of various genes are coming up as broadly applicable and high throughput typing systems. Still there is no consensus regarding the single best method for typing of MRSA strains. Phage typing is recommended as first line approach in epidemiological investigation of MRSA strains. PFGE remains the gold standard for characterisation of outbreak strains. DNA sequencing methods including MLST, spa typing, SCCmec typing and toxin gene profile typing are more practical methods for detecting evolutionary changes and transmission events. The choice of typing technique further depends on the purpose of the study, the facilities available and the utility of data generated to answer a desirable research question. A need for harmonisation of typing techniques by following standard protocols is emphasised to establish surveillance networks and facilitate global MRSA control.

  1. A systematic review of technical evaluation in telemedicine systems.

    Science.gov (United States)

    Thiyagarajan, C A; Clarke, M

    2006-01-01

    We conducted a systematic review of the literature to critically analyse the evaluation and assessment frameworks that have been applied to telemedicine systems. Subjective methods were predominantly used for technical evaluation (59 %), e.g. Likert scale. Those including objective measurements (41%) were restricted to simple metrics such as network time delays. Only three papers included a rigorous standards based objective approach. Our investigation has been unable to determine a definitive standards-based telemedicine evaluation framework that exists in the literature that may be applied systematically to assess and compare telemedicine systems. We conclude that work needs to be done to address this deficiency. We have therefore developed a framework that has been used to evaluate videoconferencing systems telemedicine applications. Our method seeks to be simple to allow relatively inexperienced users to make measurements, is objective and repeatable, is standards based, is inexpensive and requires little specialist equipment. We use the EIA 1956 broadcast test card to assess resolution, grey scale and for astigmatism. Colour discrimination is assessed with the TE 106 and Ishihara 24 colour scale chart. Network protocol analysis software is used to assess network performance (throughput, delay, jitter, packet loss).

  2. Remote monitoring technical review for light water reactors (Phase 1)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Seung Sik; Yoon, Wan Ki; Na, Won Woo; Kwack, Eun Ho [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    The IAEA has been conducting a field trial of a Remote Monitoring System (RMS) at the spent fuel storage, Younggwang 3 nuclear power plant. The system installation plan was initiated after the agreement in the 7th ROK-IAEA safeguards Implementation Review Meeting that was held in Soul, 1998. It describes that IAEA and Korea proceed RM tasks Implementation of RMS at LWRs in the ROK for field trials. The project of RMS is conducting through 3 stages with timing. RMS has been installed for the Phase I of field trial, one of two stages at Younggwang Unit 3 in October 1998. The RMS consists of video systems and a seal at the spent fuel pond area. This report provides a description of the monitoring system and its functions focusing on several technical points of the installation and its 6 month operation at Younggwang Unit 3. Subjects are selected and analyzed in the three chapters, IAEA safeguards policy on Remote Monitoring, the technology, and field test experiences. 8 refs., 12 figs., 12 tabs. (Author)

  3. International Linear Collider Technical Review Committee Report, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This 1995 report of the International Linear Collider Technical Review Committee is the first attempt to gather in one document the current status of all major e{sup +}e{sup {minus}} linear collider projects in the world. The report is the result of a collaborative effort of scientists from many laboratories working together over a period of about one year. A short description of the organization, origins and history of the report is given below. To get an idea of the organization, the reader should first refer to the Table of Contents. Chapter 1 is an introduction and general overview of the respective 500 GeV c.m. energy machines. In contrast, Chapter 2, cutting across individual machine boundaries, gives a comparative description and discussion of all the major machine sub-systems as well as particle physics experimentation, showing where these subjects stand today and what additional work needs to be done in the next few years to reach the point where complete design reports can be prepared. Chapter 3 describes the various paths to energy upgrades, and other experimental options ({gamma}{gamma}, e{sup {minus}}e{sup {minus}}, etc.). Chapter 4 gives a short status report of the machine experiments and test facilities being built in the world. Chapter 5 outlines current and other possible areas of collaboration and finally., Chapter 6 summarizes our principal conclusions.

  4. International Linear Collider Technical Review Committee: Second Report, 2003

    Energy Technology Data Exchange (ETDEWEB)

    Loew, Gregory

    2003-02-21

    As this report is being published, the international high energy physics (HEP) community finds itself confronting a set of fascinating discoveries and new questions regarding the nature of matter and its fundamental particles and forces. The observation of neutrino oscillations that indicates that neutrinos have mass, measurements of the accelerating expansion of the universe that may be due to dark energy, and evidence for a period of rapid inflation at the beginning of the Big Bang are stimulating the entire field. Looming on the horizon are the potential discoveries of a Higgs particle that may reveal the origin of mass and of a whole family of supersymmetric particles that may be part of the cosmic dark matter. For the HEP community to elucidate these mysteries, new accelerators are indispensable. At this time, after careful deliberations, all three regional organizations of the HEP community (ACFA in Asia, HEPAP in North America, and ECFA in Europe) have reached the common conclusion that the next accelerator should be an electron-positron linear collider with an initial center-of-mass energy of 500 Giga-electronvolts (GeV), later upgradable to higher energies, and that it should be built and operated in parallel with the Large Hadron Collider under construction at CERN. Hence, this second report of the International Linear Collider Technical Review Committee (ILC-TRC) comes at a very timely moment. The report was requested by the International Committee on Future Accelerators (ICFA) in February 2001 to assess the current technical status of electron-positron linear collider designs in the various regions. Note that the ILC-TRC was not asked to concern itself with either cost studies or the ultimate selection process of a machine. This Executive Summary gives a short outline of the genesis of the report, the charge given to the committee, and its organization. It then presents a brief description of four electron-positron linear collider designs at hand. The

  5. 77 FR 8926 - Board Meeting: March 7, 2012-Albuquerque, NM; The U.S. Nuclear Waste Technical Review Board Will...

    Science.gov (United States)

    2012-02-15

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: March 7, 2012--Albuquerque, NM; The U.S. Nuclear Waste Technical Review Board... authority under section 5051 of Public Law 100-203, the Nuclear Waste Technical Review Board will hold...

  6. Review of PREPA Technical Requirements for Interconnecting Wind and Solar Generation

    Energy Technology Data Exchange (ETDEWEB)

    Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booth, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-11-01

    The Puerto Rico Electric Power Authority developed the minimum technical requirements for interconnection of wind turbine generation and photovoltaic power plants. NREL has conducted a review of these requirements based on generic technical aspects and electrical characteristics of wind and photovoltaic power plants, and on existing requirements from other utilities (both U.S. and European).

  7. 78 FR 77673 - Notification of a Public Meeting of the Environmental Justice Technical Guidance Review Panel

    Science.gov (United States)

    2013-12-24

    ... National Center for Environmental Economics along with the Office of Environmental Justice has requested... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Notification of a Public Meeting of the Environmental Justice Technical Guidance Review...

  8. Technical Review Guidelines for Environmental Impact Assessments in the Tourism, Energy and Mining Sectors

    Science.gov (United States)

    EPA coordinated a regional collaborative process with Central America and Dominican Republic Free Trade Agreement (CAFTA-DR) partners to develop Environmental Impact Assessment (EIA) Technical Review Guidelines for three sectors.

  9. Book Review: Space Research at the Technical University of Moldova.

    Science.gov (United States)

    Gaina, Alex

    Recently the historian of the Technical University of Moldova Aurel Marinchuk (Marinciuc) in a collaboration with the editorial team from the same University has published a Jubiliary Album "50 Years of the Technical University of Moldova". The Album is published at the Technical University in Chisinau (The Republic of Moldova). Two chapters of this album present major interest: 1) Space research at the Technical University of Moldova 2) The Foucault Pendulum manufactured at the same University under the supervision of the Rector of University, Dr. Hab. of Technical Sciences and Member of the Academy of Sciences of the Republic of Moldova Ion Bostan. The parameters of the Pendulums are: m=102 kg L=17,24 m T=8.35 sec. >From the first chapter We learn that 3 astronauts: Frank Lee Culbertson, Vladimir Dezhurov and Dumitru Dorin Prunariu are Doctors Honoris Causa of this University. As well we can found in the album informations about the Microsatellit "Republic of Moldova" built also by a team from the same University. It is ready to fly, but many depends on the funds for launch the Satellite. The Foucault Pendulum presents also interest in view of its possible applications to detect the influence of the relative position of the Sun and the Moon on Earthquakes. As is well known the tidal gravitational Force varies, depending on the relative position of the Sun and the Moon.

  10. Review of the technical bases of 40 CFR Part 190.

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, John E.; McMahon, Kevin A.; Siegel, Malcolm Dean; Weiner, Ruth F.; Bixler, Nathan E.; Klein, Keith A. (Longenecker and Associates)

    2010-07-01

    The dose limits for emissions from the nuclear fuel cycle were established by the Environmental Protection Agency in 40 CFR Part 190 in 1977. These limits were based on assumptions regarding the growth of nuclear power and the technical capabilities of decontamination systems as well as the then-current knowledge of atmospheric dispersion and the biological effects of ionizing radiation. In the more than thirty years since the adoption of the limits, much has changed with respect to the scale of nuclear energy deployment in the United States and the scientific knowledge associated with modeling health effects from radioactivity release. Sandia National Laboratories conducted a study to examine and understand the methodologies and technical bases of 40 CFR 190 and also to determine if the conclusions of the earlier work would be different today given the current projected growth of nuclear power and the advances in scientific understanding. This report documents the results of that work.

  11. Waves in Seagrass Systems: Review and Technical Recommendations

    Science.gov (United States)

    2006-11-01

    A. M. 2001. Sediment resuspension and circulation of dredged material in Laguna Madre , Texas . Technical Report. Vicksburg, MS: U.S. Army Engineer... Laguna Madre , TX, representing vegetation drag by a fixed roughness (kn ~ 0.2 m) which was tuned to give reasonable agreement with field observations...conditions are likely to also contribute to the high recruitment of larvae and juvenile stages of many organisms such as crustaceans and fishes

  12. Distributed Item Review: Administrator User Guide. Technical Report #1603

    Science.gov (United States)

    Irvin, P. Shawn

    2016-01-01

    The Distributed Item Review (DIR) is a secure and flexible, web-based system designed to present test items to expert reviewers across a broad geographic area for evaluation of important dimensions of quality (e.g., alignment with standards, bias, sensitivity, and student accessibility). The DIR is comprised of essential features that allow system…

  13. Technical review of the dispersion and dose models used in the MILDOS computer program

    Energy Technology Data Exchange (ETDEWEB)

    Horst, T W; Soldat, J K; Bander, T J

    1982-05-01

    The MILDOS computer code is used to estimate impacts of radioactive emissions from uranium milling facilities. This report reviews the technical basis of the models used in the MILDOS computer code. The models were compared with state-of-the-art predictions, taking into account the intended uses of the MILDOS code. Several suggested modifications are presented and the technical basis for those changes are given.

  14. Robotic surgery for gastric cancer: a technical review.

    Science.gov (United States)

    Hyung, Woo Jin; Woo, Yanghee; Noh, Sung Hoon

    2011-12-01

    Minimally invasive gastric cancer surgery is gaining acceptance, especially in the treatment of patients with early gastric cancer. While offering patients the benefits of minimally invasive surgery, laparoscopic surgery is limited by several disadvantages such as altered operating view and lack of versatility in surgical instrumentation. Robotic surgery offers the surgeon the benefit of superior 3D visualization, the freedom of the EndoWrist function, and the tremble-filtered control of the four robotic arms. Due to the technical advantages of the robotic surgical system, robotic surgery may facilitate the expansion of minimally invasive surgery over laparoscopy. The application of robotic surgery for gastric cancer is increasing in experienced centers. Most reports of the robotic operating methods are only slightly modified from the laparoscopic technique. Robotic gastric cancer surgery including radical subtotal gastrectomy with D2 lymph node dissection is technically feasible and safe and results in similar short-term postoperative outcomes when compared to laparoscopic surgery. The role of robotic surgery in gastric cancer is promising but awaits further comparative studies of long-term results and cost-effectiveness.

  15. Developing and Improving Student Non-Technical Skills in IT Education: A Literature Review and Model

    Directory of Open Access Journals (Sweden)

    Marcia Hagen

    2016-06-01

    Full Text Available The purpose of this paper is to identify portions of the literature in the areas of Information Technology (IT management, skills development, and curriculum development that support the design of a holistic conceptual framework for instruction in non-technical skills within the IT higher education context. This article review provides a framework for understanding how the critical success factors related to IT and Information Systems (IS professional success is impacted by developing students’ non-technical skills. The article culminates in a holistic conceptual framework for developing non-technical skills within the IT higher education context. Implications for theory and research are provided.

  16. Scientific and technical aspects of yogurt fortification: A review

    Directory of Open Access Journals (Sweden)

    Hadi Hashemi Gahruie

    2015-03-01

    Full Text Available Food fortification is one of the most important processes for improvement of the nutrients quality and quantity in food. It can be a very cost effective public health intervention. Due to the high consumption rate of dairy products such as yogurt, fortification of these products will effectively reduce or prevent diseases associated with nutritional deficiencies. The aim of this investigation is to study the technical aspects involved in production of different types of fortified yogurts and their role in disease prevention and correction of deficiencies. In this paper, firstly, fortification is defined and the main reasons behind carrying out this process are presented and then yogurt production process and a variety of minerals, vitamins, and functional ingredients which are used in the process are briefly discussed.

  17. Technical Review of SRS Dose Reconstrruction Methods Used By CDC

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, Ali, A

    2005-07-20

    At the request of the Centers for Disease Control and Prevention (CDC), a subcontractor Advanced Technologies and Laboratories International, Inc.(ATL) issued a draft report estimating offsite dose as a result of Savannah River Site operations for the period 1954-1992 in support of Phase III of the SRS Dose Reconstruction Project. The doses reported by ATL differed than those previously estimated by Savannah River Site SRS dose modelers for a variety of reasons, but primarily because (1) ATL used different source terms, (2) ATL considered trespasser/poacher scenarios and (3) ATL did not consistently use site-specific parameters or correct usage parameters. The receptors with the highest dose from atmospheric and liquid pathways were within about a factor of four greater than dose values previously reported by SRS. A complete set of technical comments have also been included.

  18. Independent Technical Review of In-Tank Precipitation (ITP) at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    An Independent Technical Review of In-Tank Precipitation (ITP) and Extended Sludge Processing (ESP) at the Savannah River Site (SRS) was carried out in March, 1993. The review focused on ITP/ESP equipment and chemical processes, integration of ITP/ESP within the High Level Waste (HLW) and Defense Waste Processing Facility (DWPF) systems, and management and regulatory concerns. Following the ITR executive summary, this report includes: Chapter I--summary assessment; Chapter II--recommendations; and Chapter III--technical evaluations.

  19. Intermediate Technical Review Report : Deliverable D0.4

    DEFF Research Database (Denmark)

    Bygholm, Ann; Buus, Lillian; Svendsen, Brian Møller;

    This report provides a coprehensivi overview of the activities of the Mediterranean Virtual Univeristy Project from the contract start for December 2005. It provides a review of the achievements so far and a discussion of issues currently being adressed along with remedial actions. The report als...

  20. General Electric ATS program technical review: Phase 2 activities

    Energy Technology Data Exchange (ETDEWEB)

    Chance, T. [GE Power Generation, Schenectady, NY (United States); Smith, D. [GE Corporate Research & Development Center, Schenectady, NY (United States)

    1995-10-01

    In response to the industrial and utility objectives specified for the ATS, the GE Power Generation ATS Phase 2 Program consisted of a dual approach. These were (1) development of an Industrial ATS (aircraft engine based) led by GE Aircraft Engines, and (2) development of a Utility ATS which was already underway at GEPG. Both programs required the identification and resolution of critical technical issues. Both systems were studied in Tasks 3-7, and both have resulted in designs that meet all ATS goals. The Industrial ATS as defined (130 MW) did not meet projected market power size requirements, and emphasis has remained on the Utility ATS development. The design and testing effort has been focused on the MS7001H combined cycle gas turbine, as the next product evolution in GE Power Generation`s product line. Common technology derived from the ATS Program is also being incorporated into the 50 Hz version of the ATS utility machine designated as the MS9001H.

  1. Review Article. Technical aspects of oxygen level regulation in primary cell cultures: A review

    Directory of Open Access Journals (Sweden)

    Yazdani Mazyar

    2016-12-01

    Full Text Available Oxygen (O2 is an essential element for aerobic respiration. Atmospheric concentration of O2 is approximately 21%. Mammalian cells, however, are generally adapted to O2 levels much lower than atmospheric conditions. The pericellular levels of O2 must also be maintained within a fairly narrow range to meet the demands of cells. This applies equally to cells in vivo and cells in primary cultures. There has been growing interest in the performance of cell culture experiments under various O2 levels to study molecular and cellular responses. To this end, a range of technologies (e.g. gas-permeable technology and instruments (e.g. gas-tight boxes and gas-controlled incubators have been developed. It should be noted, however, that some of these have limitations and they are still undergoing refinement. Nevertheless, better results should be possible when technical concerns are taken into account. This paper aims to review various aspects of O2 level adjustment in primary cell cultures, regulation of pericellular O2 gradients and possible effects of the cell culture medium.

  2. Nuclear Safety: Technical progress review, January--March 1989

    Energy Technology Data Exchange (ETDEWEB)

    Silver, E. G. [ed.

    1989-01-01

    This review journal covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  3. Community Noise Exposure Resulting from Aircraft Operations: Technical Review

    Science.gov (United States)

    1974-11-01

    approved for publication. FOR THE COMMANDER HENHllGiJE. VOM GIERKE Director Biodynamics and Bionics Division Aerospace Medical Research...content, critical review, and suggestions by Jerry D. Speakman and John N. Cole of the Biodynamics and Bionics Division, Aerospace Medical Research...reasons for some of the basic decisions in the architecture of the computer program. We are basically accumulating NEF(ij) at our grid points. It is

  4. The KRISP 90 seismic experiment—a technical review

    Science.gov (United States)

    Prodehl, C.; Mechie, J.; Achauer, U.; Keller, G. R.; Khan, M. A.; Mooney, W. D.; Gaciri, S. J.; Obel, J. D.

    1994-09-01

    On the basis of a preliminary experiment in 1985 (KRISP 85), a seismic refraction/wide-angle reflection survey and a teleseismic tomography experiment were jointly undertaken to study the lithospheric structure of the Kenya rift down to depths of greater than 200 km. This report serves as an introduction to a series of subsequent papers and will focus on the technical description of the seismic surveys of the main KRISP 90 effort. The seismic refraction/wide-angle reflection survey was carried out in a 4-week period in January and February 1990. It consisted of three profiles: one extending along the rift valley from Lake Turkana to Lake Magadi, one crossing the rift at Lake Baringo, and one located on the eastern flank of the rift proper. A total of 206 mobile vertical-component seismographs, with an average station interval of about 2 km, recorded the energy of underwater and borehole explosions to distances of up to about 550 km. During the teleseismic survey an array of 65 seismographs was deployed to record teleseismic, regional and local events for a period of about 7 months from October 1989 to April 1990. The elliptical array spanned the central portion of the rift, with Nakuru at its center, and covered an area about 300 × 200 km, with an average station spacing of 10-30 km. Major scientific goals of the project were to reveal the detailed crustal and upper-mantle structure under the Kenya rift, to study the relationship between deep crustal and mantle structure and the development of sedimentary basins and volcanic features within the rift, to understand the role of the Kenya rift within the Afro-Arabian rift system, and to answer fundamental questions such as the mode and mechanism of continental rifting.

  5. The KRISP 90 seismic experiment-a technical review

    Science.gov (United States)

    Prodehl, C.; Mechie, J.; Achauer, U.; Keller, Gordon R.; Khan, M.A.; Mooney, W.D.; Gaciri, S.J.; Obel, J.D.

    1994-01-01

    On the basis of a preliminary experiment in 1985 (KRISP 85), a seismic refraction/wide-angle reflection survey and a teleseismic tomography experiment were jointly undertaken to study the lithospheric structure of the Kenya rift down to depths of greater than 200 km. This report serves as an introduction to a series of subsequent papers and will focus on the technical description of the seismic surveys of the main KRISP 90 effort. The seismic refraction/wide-angle reflection survey was carried out in a 4-week period in January and February 1990. It consisted of three profiles: one extending along the rift valley from Lake Turkana to Lake Magadi, one crossing the rift at Lake Baringo, and one located on the eastern flank of the rift proper. A total of 206 mobile vertical-component seismographs, with an average station interval of about 2 km, recorded the energy of underwater and borehole explosions to distances of up to about 550 km. During the teleseismic survey an array of 65 seismographs was deployed to record teleseismic, regional and local events for a period of about 7 months from October 1989 to April 1990. The elliptical array spanned the central portion of the rift, with Nakuru at its center, and covered an area about 300 ?? 200 km, with an average station spacing of 10-30 km. Major scientific goals of the project were to reveal the detailed crustal and upper-mantle structure under the Kenya rift, to study the relationship between deep crustal and mantle structure and the development of sedimentary basins and volcanic features within the rift, to understand the role of the Kenya rift within the Afro-Arabian rift system, and to answer fundamental questions such as the mode and mechanism of continental rifting. ?? 1994.

  6. MRI-based myelin water imaging: A technical review.

    Science.gov (United States)

    Alonso-Ortiz, Eva; Levesque, Ives R; Pike, G Bruce

    2015-01-01

    Multiexponential T2 relaxation time measurement in the central nervous system shows a component that originates from water trapped between the lipid bilayers of myelin. This myelin water component is of significant interest as it provides a myelin-specific MRI signal of value in assessing myelin changes in cerebral white matter in vivo. In this article, the various acquisition and analysis strategies proposed to date for myelin water imaging are reviewed and research conducted into their validity and clinical applicability is presented. Comparisons between the imaging methods are made with a discussion regarding potential difficulties and model limitations.

  7. Technical review of enhanced oil recovery literature. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This report represents the work done under DOE grant No. DE-FG05-79ER10086. It reviews the chemical, miscible and thermal areas of enhanced and recovery (EOR) and has produced a comprehensive bibliography and glossary of terms. The analysis looks into several areas of interest, including: screening criteria, process design, variable interaction and reservoir applicability. In this summary section, the following are shown: (1) screening criteria for process selection; (2) screening guide summary for EOR process; and (3) representative schematics of three major process operations.

  8. Nuclear Safety: Volume 29, No. 3: Technical progress review

    Energy Technology Data Exchange (ETDEWEB)

    Silver, E G [ed.

    1988-07-01

    Nuclear Safety is a review journal that covers significant development in the field of nuclear safety. Its scope included the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Individual papers have been cataloged separately.

  9. Nulcear Safety: Technical progress review, October--December 1988

    Energy Technology Data Exchange (ETDEWEB)

    Silver, E G [ed.

    1988-01-01

    Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  10. The Effect of Technical Performance on Patient Outcomes in Surgery: A Systematic Review.

    Science.gov (United States)

    Fecso, Andras B; Szasz, Peter; Kerezov, Georgi; Grantcharov, Teodor P

    2017-03-01

    Systematic review of the effect of intraoperative technical performance on patient outcomes. The operating room is a high-stakes, high-risk environment. As a result, the quality of surgical interventions affecting patient outcomes has been the subject of discussion and research for years. MEDLINE, EMBASE, PsycINFO, and Cochrane databases were searched. All surgical specialties were eligible for inclusion. Data were reviewed in regards to the methods by which technical performance was measured, what patient outcomes were assessed, and how intraoperative technical performance affected patient outcomes. Quality of evidence was assessed using the Medical Education Research Study Quality Instrument (MERSQI). Of the 12,758 studies initially identified, 24 articles (7775 total participants) were ultimately included in this review. Seventeen studies assessed the performance of the faculty alone, 2 assessed both the faculty and trainees, 1 assessed trainees alone, and in 4 studies, the level of the operating surgeon was not specified. In 18 studies, a performance assessment tool was used. Patient outcomes were evaluated using intraoperative complications, short-term morbidity, long-term morbidity, short-term mortality, and long-term mortality. The average MERSQI score was 11.67 (range 9.5-14.5). Twenty-one studies demonstrated that superior technical performance was related to improved patient outcomes. The results of this systematic review demonstrated that superior technical performance positively affects patient outcomes. Despite this initial evidence, more robust research is needed to directly assess intraoperative technical performance and its effect on postoperative patient outcomes using meaningful assessment instruments and reliable processes.

  11. Technical options for the mitigation of direct methane and nitrous oxide emissions from livestock: a review

    NARCIS (Netherlands)

    Gerber, P.J.; Hristov, A.N.; Henderson, B.L.; Makkar, H.P.S.; Oh, J.; Lee, C.; Meinen, R.; Montes, F.; Ott, T.; Firkins, J.; Rotz, A.; Dell, C.; Adesogan, A.T.; Yang, W.Z.; Tricarico, J.M.; Kebreab, E.; Waghorn, G.; Dijkstra, J.; Oosting, S.J.

    2013-01-01

    Although livestock production accounts for a sizeable share of global greenhouse gas emissions, numerous technical options have been identified to mitigate these emissions. In this review, a subset of these options, which have proven to be effective, are discussed. These include measures to reduce C

  12. Measuring the Value Added by Technical Documentation: A Review of Research and Practice.

    Science.gov (United States)

    Mead, Jay

    1998-01-01

    Reviews existing work on establishing value of technical documentation to determine its principles. States that value can be returned by reducing internal investment, increasing sales, and reducing after-sales costs. Argues that further research will improve the understanding of information as the product itself, rather than simply a supporting…

  13. Robotic Arm-Assisted Sonography: Review of Technical Developments and Potential Clinical Applications.

    Science.gov (United States)

    Swerdlow, Daniel R; Cleary, Kevin; Wilson, Emmanuel; Azizi-Koutenaei, Bamshad; Monfaredi, Reza

    2017-04-01

    Ultrasound imaging requires trained personnel. Advances in robotics and data transmission create the possibility of telesonography. This review introduces clinicians to current technical work in and potential applications of this developing capability. Telesonography offers advantages in hazardous or remote environments. Robotically assisted ultrasound can reduce stress injuries in sonographers and has potential utility during robotic surgery and interventional procedures.

  14. Estimating the cost of accidents and ill-health at work : a review of methodologies technical annex

    NARCIS (Netherlands)

    Weerd, M. de; Tierney, R.; Duuren-Stuurman, B. van; Bertranou, E.

    2014-01-01

    This technical annex complements the report 'Estimating the cost of accidents and ill-health at work - a review of methodologies' by providing further details on each of the studies reviewed, including their results.

  15. Face Detection in Digital Image: A Technical Review

    Directory of Open Access Journals (Sweden)

    Devang C

    2015-01-01

    Full Text Available Face detection is the method of focusing faces in input image is an important part of any face processing system. In Face detection, segmentation plays the major role to detect the face. There are many contests for effective and efficient face detection. The aim of this paper is to present a review on several algorithms and methods used for face detection. We read the various surveys and related various techniques according to how they extract features and what learning algorithms are adopted for. Face detection system has two major phases, first to segment skin region from an image and second to decide these regions cover human face or not. There are number of algorithms used in face detection namely Genetic, Hausdorff Distance etc.

  16. Models for waste life cycle assessment: Review of technical assumptions

    DEFF Research Database (Denmark)

    Gentil, Emmanuel; Damgaard, Anders; Hauschild, Michael Zwicky

    2010-01-01

    A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results......, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing...... waste LCA models. This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely...

  17. 76 FR 17970 - Board Meeting: April 27, 2011-Amherst, New York; the U.S. Nuclear Waste Technical Review Board...

    Science.gov (United States)

    2011-03-31

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: April 27, 2011--Amherst, New York; the U.S. Nuclear Waste Technical Review... 5051 of Public Law 100-203, Nuclear Waste Policy Amendments Act of 1987, the U.S. Nuclear...

  18. BPA-Solicited Technical Review of "Echo Meadows Project Winter Artificial Recharge: Final Report for 2001 Baseline", Technical Report 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, David

    2004-02-01

    The purpose of this report was to provide, at BPA's request, a technical review of interim products received for Project 2001-015-00 under contract 6925. BPA sometimes solicits technical reviews for Fish and Wildlife products or issues where outside expertise is required. External review of complex project deliverables assures BPA as a funding agency that the contractor is continuing with scientifically-credible experimental techniques envisioned in the original proposal. If the project's methodology proves feasible, there could be potential applications beyond the project area to similar situations in the Columbia Basin. The Experiment involves artificial flooding during high flow periods and a determination of the portion of the return flows that end up in the Umatilla River during low flow months and within acceptable water quality parameters (e.g., low temperature, few contaminants). Flooding could be a critical water source for aquatic organisms at times of the year when flows in the lower reaches of the Umatilla River are low and water is warmer than would be desired. The experiment was proposed to test whether 'this process, recharges the shallow aquifers of the old flood plain, for natural filtration through the alluvial soils as it returns to the Umatilla River, cleaner and cooler (about 50 degree Fahrenheit) five to six month later (about July and August) substantially cooling the river and [making it] more beneficial to anadromous [fish]'. A substantial amount of preliminary data had been collected and preliminary results were submitted in an interim report 'Echo Meadows Project Winter Artificial Recharge: Final Report for 2001 Baseline (December 2002)'. A substantial amount of addition funding was provided for the last cycle of flooding (Phases II) and final analyses of the full compliment of data collected over the life of the contract (Phase III). Third party scientific review may assist the contractor in producing a

  19. PNL technical review of pressurized thermal-shock issues. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, L.T.; Apley, W.J.; Bian, S.H.; Defferding, L.J.; Morgenstern, M.H.; Pelto, P.J.; Simonen, E.P.; Simonen, F.A.; Stevens, D.L.; Taylor, T.T.

    1982-07-01

    Pacific Northwest Laboratory (PNL) was asked to develop and recommend a regulatory position that the Nuclear Regulatory Commission (NRC) should adopt regarding the ability of reactor pressure vessels to withstand the effects of pressurized thermal shock (PTS). Licensees of eight pressurized water reactors provided NRC with estimates of remaining effective full power years before corrective actions would be required to prevent an unsafe operating condition. PNL reviewed these responses and the results of supporting research and concluded that none of the eight reactors would undergo vessel failure from a PTS event before several more years of operation. Operator actions, however, were often required to terminate a PTS event before it deteriorated to the point where failure could occur. Therefore, the near-term (less than one year) recommendation is to upgrade, on a site-specific basis, operational procedures, training, and control room instrumentation. Also, uniform criteria should be developed by NRC for use during future licensee analyses. Finally, it was recommended that NRC upgrade nondestructive inspection techniques used during vessel examinations and become more involved in the evaluation of annealing requirements.

  20. A systematic literature review on security and privacy of electronic health record systems: technical perspectives.

    Science.gov (United States)

    Rezaeibagha, Fatemeh; Win, Khin Than; Susilo, Willy

    2015-01-01

    Even though many safeguards and policies for electronic health record (EHR) security have been implemented, barriers to the privacy and security protection of EHR systems persist. This article presents the results of a systematic literature review regarding frequently adopted security and privacy technical features of EHR systems. Our inclusion criteria were full articles that dealt with the security and privacy of technical implementations of EHR systems published in English in peer-reviewed journals and conference proceedings between 1998 and 2013; 55 selected studies were reviewed in detail. We analysed the review results using two International Organization for Standardization (ISO) standards (29100 and 27002) in order to consolidate the study findings. Using this process, we identified 13 features that are essential to security and privacy in EHRs. These included system and application access control, compliance with security requirements, interoperability, integration and sharing, consent and choice mechanism, policies and regulation, applicability and scalability and cryptography techniques. This review highlights the importance of technical features, including mandated access control policies and consent mechanisms, to provide patients' consent, scalability through proper architecture and frameworks, and interoperability of health information systems, to EHR security and privacy requirements.

  1. A Review on Technical and Clinical Impact of Microsoft Kinect on Physical Therapy and Rehabilitation.

    Science.gov (United States)

    Mousavi Hondori, Hossein; Khademi, Maryam

    2014-01-01

    This paper reviews technical and clinical impact of the Microsoft Kinect in physical therapy and rehabilitation. It covers the studies on patients with neurological disorders including stroke, Parkinson's, cerebral palsy, and MS as well as the elderly patients. Search results in Pubmed and Google scholar reveal increasing interest in using Kinect in medical application. Relevant papers are reviewed and divided into three groups: (1) papers which evaluated Kinect's accuracy and reliability, (2) papers which used Kinect for a rehabilitation system and provided clinical evaluation involving patients, and (3) papers which proposed a Kinect-based system for rehabilitation but fell short of providing clinical validation. At last, to serve as technical comparison to help future rehabilitation design other sensors similar to Kinect are reviewed.

  2. A Review on Technical and Clinical Impact of Microsoft Kinect on Physical Therapy and Rehabilitation

    Directory of Open Access Journals (Sweden)

    Hossein Mousavi Hondori

    2014-01-01

    Full Text Available This paper reviews technical and clinical impact of the Microsoft Kinect in physical therapy and rehabilitation. It covers the studies on patients with neurological disorders including stroke, Parkinson’s, cerebral palsy, and MS as well as the elderly patients. Search results in Pubmed and Google scholar reveal increasing interest in using Kinect in medical application. Relevant papers are reviewed and divided into three groups: (1 papers which evaluated Kinect’s accuracy and reliability, (2 papers which used Kinect for a rehabilitation system and provided clinical evaluation involving patients, and (3 papers which proposed a Kinect-based system for rehabilitation but fell short of providing clinical validation. At last, to serve as technical comparison to help future rehabilitation design other sensors similar to Kinect are reviewed.

  3. SUPPLEMENTAL COLUMBIA RIVER PROTECTION ACTIVITIES AT THE DEPARTMENT OF ENERGY HANFORD SITE: 2006 TECHNICAL PEER REVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B; Dawn Kaback; Gene Leboeuf; Jason Mulvihill-Kuntz; Lynn Lefkoff

    2006-12-20

    Prompted by a $10 million Congressional allocation to identify supplemental actions to protect the Columbia River from groundwater contamination beneath the Hanford Reservation, the U. S. Department of Energy (DOE) Environmental Management (EM) Office of Clean-up Technology identified twenty-three potential technical projects and then down-selected ten of these for further evaluation. An independent expert peer review was conducted for the ten down-selected proposals. The review panel consisted of twenty-three recognized subject matter experts that broadly represented academia, industry, and federal laboratories. Of the initial ten proposals reviewed, one was given unconditional support, six were given conditional support, and three were not supported as proposed. Three additional proposals were then submitted by DOE for review--these proposals were structured, in part, to respond to the initial round of technical peer review comments. Peer reviews of these additional proposals provided conditional support. For those proposals that received conditional support, DOE requested specific implementation and work plans and assessed whether the plans adequately addressed the technical conditions identified by the review panel. The final list of technology proposals receiving support, or conditional support, primarily focused on understanding and reducing the potential impacts of uranium, chromium, and strontium from facilities adjacent to the Columbia River, with a secondary focus on understanding and limiting the future Columbia River impacts from the large carbon tetrachloride groundwater plume underlying and downgradient of the Hanford Central Plateau facilities. The results and recommendations of the peer reviews informed the final DOE project selections and supported implementation of the selected projects to protect the Columbia River and address groundwater contamination at Hanford.

  4. Interprofessional non-technical skills for surgeons in disaster response: a literature review.

    Science.gov (United States)

    Willems, Anneliese; Waxman, Bruce; Bacon, Andrew K; Smith, Julian; Kitto, Simon

    2013-09-01

    Natural disasters impose a significant burden on society. Current disaster training programmes do not place an emphasis on equipping surgeons with non-technical skills for disaster response. This literature review sought to identify non-technical skills required of surgeons in disaster response through an examination of four categories of literature: "disaster"; "surgical"; "organisational management"; and "interprofessional". Literature search criteria included electronic database searches, internet searches, hand searching, ancestry searching and networking strategies. Various potential non-technical skills for surgeons in disaster response were identified including: interpersonal skills such as communication, teamwork and leadership; cognitive strategies such flexibility, adaptability, innovation, improvisation and creativity; physical and psychological self-care; conflict management, collaboration, professionalism, health advocacy and teaching. Such skills and the role of interprofessionalism should be considered for inclusion in surgical disaster response training course curricula.

  5. INDEPENDENT REVIEW OF THE X-701B GROUNDWATER REMEDY, PORTSMOUTH, OHIO: TECHNICAL EVALUATION AND RECOMMENDATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Eddy-Dilek, C.; Costanza, J.; Rossabi, J.; Early, T.; Skubal, K.; Magnuson, C.

    2008-12-15

    The Department of Energy Portsmouth Paducah Project Office requested assistance from Department of Energy Office of Environmental Management (EM-22) to provide independent technical experts to evaluate past and ongoing remedial activities at the Portsmouth facility that were completed to address TCE contamination associated with the X-701B groundwater plume and to make recommendations for future efforts. The Independent Technical Review team was provided with a detailed and specific charter. The charter requested that the technical team first review the past and current activities completed for the X-701B groundwater remedy for trichloroethene (TCE) in accordance with a Decision Document that was issued by Ohio EPA on December 8, 2003 and a Work Plan that was approved by Ohio EPA on September 22, 2006. The remedy for X-701B divides the activities into four phases: Phase I - Initial Source Area Treatment, Phase II - Expanded Source Area Treatment, Phase III - Evaluation and Reporting, and Phase IV - Downgradient Remediation and Confirmation of Source Area Treatment. Phase I of the remedy was completed during FY2006, and DOE has now completed six oxidant injection events within Phase II. The Independent Technical Review team was asked to evaluate Phase II activities, including soil and groundwater results, and to determine whether or not the criteria that were defined in the Work Plan for the Phase II end point had been met. The following criteria are defined in the Work Plan as an acceptable Phase II end point: (1) Groundwater samples from the identified source area monitoring wells have concentrations below the Preliminary Remediation Goal (PRG) for TCE in groundwater, or (2) The remedy is no longer effective in removing TCE mass from the source area. In addition, the charter specifies that if the Review Team determines that the Phase II endpoint has not been reached, then the team should address the following issues: (1) If additional injection events are

  6. Advanced Information Systems Design: Technical Basis and Human Factors Review Guidance

    Science.gov (United States)

    2000-03-01

    H^ NUREG /CR-6633 BNL- NUREG -52563 Advanced Information Systems Design: Technical Basis and Human Factors Review Guidance Brookhaven National...AVAILABILITY NOTICE Availability of Reference Materials Cited in NRC Publications NRC publications in the NUREG series, NRC regu- lations, and Title...Information Service Springfield, VA 22161 -0002 <http://www.ntis.gov> 1 -800-553-6847 or locally 703-605-6000 The NUREG series comprises (1) brochures

  7. Human Systems Interface and Plant Modernization Process: Technical Basis and Human Factors Review Guidance

    Science.gov (United States)

    2000-03-01

    NUREG /CR-6637 BNL- NUREG -52567 Human Systems Interface and Plant Modernization Process: Technical Basis and Human Factors Review Guidance Brookhaven...NOTICE Availability of Reference Materials Cited in NRC Publications NRC publications in the NUREG series, NRC regu- <http://www.nrc.gov>lations, and...sources: access NUREG -series publications and other NRCrecords in NRC’s Agencywide Document Access 1. The Superintendent of Documents and Management

  8. A Review of Warm Mix Asphalt Technology: Technical, Eco-nomical and Enviromental Aspects

    Directory of Open Access Journals (Sweden)

    Hugo Alexander Rondón

    2015-12-01

    Full Text Available In general terms, warm mix asphalt (WMA technology presents a wide potential for successful use in road works construction projects. However, concerns remain regarding the durability and behavior of WMA mixtures in the long term, which need to be addressed. This review focuses on the technical, economic and environmental advantages and disadvantages. The review concludes that the main advantage, at the moment, of this technology concerns the environment. At the end of this work, the authors include certain recommendations for future works to continue strengthening the development of WMA technology.

  9. Technical Review of Retrieval and Closure Plans for the INEEL INTEC Tank Farm Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bamberger, Judith A.; Burks, Barry L.; Quigley, Keith D.; Butterworth, S. W.; Falter, Diedre D.

    2001-09-28

    The purpose of this report is to document the conclusions of a technical review of retrieval and closure plans for the Idaho National Energy and Environmental Laboratory (INEEL) Idaho Nuclear Technology and Engineering Center (INTEC) Tank Farm Facility. In addition to reviewing retrieval and closure plans for these tanks, the review process served as an information exchange mechanism so that staff in the INEEL High Level Waste (HLW) Program could become more familiar with retrieval and closure approaches that have been completed or are planned for underground storage tanks at the Oak Ridge National Laboratory (ORNL) and Hanford sites. This review focused not only on evaluation of the technical feasibility and appropriateness of the approach selected by INEEL but also on technology gaps that could be addressed through utilization of technologies or performance data available at other DOE sites and in the private sector. The reviewers, Judith Bamberger of Pacific Northwest National Laboratory (PNNL) and Dr. Barry Burks of The Providence Group Applied Technology, have extensive experience in the development and application of tank waste retrieval technologies for nuclear waste remediation.

  10. Technical Review of Retrieval and Closure Plans for the INEEL INTEC Tank Farm Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bamberger, Judith A; Burks, Barry L; Quigley, Keith D; Falter, Diedre D

    2001-09-28

    The purpose of this report is to document the conclusions of a technical review of retrieval and closure plans for the Idaho National Energy and Environmental Laboratory (INEEL) Idaho Nuclear Technology and Engineering Center (INTEC) Tank Farm Facility. In addition to reviewing retrieval and closure plans for these tanks, the review process served as an information exchange mechanism so that staff in the INEEL High Level Waste (HLW) Program could become more familiar with retrieval and closure approaches that have been completed or are planned for underground storage tanks at the Oak Ridge National Laboratory (ORNL) and Hanford sites. This review focused not only on evaluation of the technical feasibility and appropriateness of the approach selected by INEEL but also on technology gaps that could be addressed through utilization of technologies or performance data available at other DOE sites and in the private sector. The reviewers, Judith Bamberger of Pacific Northwest National Laboratory (PNNL) and Dr. Barry Burks of The Providence Group Applied Technology, have extensive experience in the development and application of tank waste retrieval technologies for nuclear waste remediation.

  11. Review of Sodium and Plutonium related Technical Standards in Trans-Uranium Fuel Fabrication Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Misuk; Jeon, Jong Seon; Kang, Hyun Sik; Kim, Seoung Rae [NESS, Daejeon (Korea, Republic of)

    2016-10-15

    In this paper, we would introduce and review technical standards related to sodium fire and plutonium criticality safety. This paper may be helpful to identify considerations in the development of equipment, standards, and etc., to meet the safety requirements in the design, construction and operating of TFFF, KAPF and SFR. The feasibility and conceptual designs are being examined on related facilities, for example, TRU Fuel Fabrication Facilities (TFFF), Korea Advanced Pyro-process Facility (KAPF), and Sodium Cooled Fast Reactor (SFR), in Korea. However, the safety concerns of these facilities have been controversial in part because of the Sodium fire accident and Plutonium related radiation safety caused by transport and handling accident. Thus, many researches have been performed to ensure safety and various documents including safety requirements have been developed. In separating and reducing the long-lived radioactive transuranic(TRU) in the spent nuclear fuel, reusing as the potential energy of uranium fuel resources and reducing the high level wastes, TFFF would be receiving the attention of many people. Thus, people would wonder whether compliance with technical standards that ensures safety. For new facility design, one of the important tasks is to review of technical standards, especially for sodium and Plutonium because of water related highly reactive characteristics and criticality hazard respectively. We have introduced and reviewed two important technical standards for TFFF, which are sodium fire and plutonium criticality safety, in this paper. This paper would provide a brief guidance, about how to start and what is important, to people who are responsible for the initial design to operation of TFFF.

  12. Production, review, and impact of technical quality control guidelines in a national context.

    Science.gov (United States)

    Nielsen, Michelle K; Malkoske, Kyle E; Brown, Erika; Diamond, Kevin; Frenière, Normand; Grant, John; Pomerleau-Dalcourt, Natalie; Schella, Jason; Schreiner, L John; Tantôt, Laurent; Villarreal-Barajas, J Eduardo; Bissonnette, Jean-Pierre

    2016-11-01

    A close partnership between the Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist's (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) has resulted in the development of a suite of Technical Quality Control (TQC) guidelines for radiation treatment equipment; they outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. The adopted framework for the development and maintenance of the TQCs ensures the guidelines incorporate input from the medical physics community during development, measures the workload required to perform the QC tests outlined in each TQC, and remain relevant (i.e., "living documents") through subsequent planned reviews and updates. The framework includes consolidation of existing guidelines and/or literature by expert reviewers, structured stages of public review, external field-testing, and ratification by COMP. This TQC development framework is a cross-country initiative that allows for rapid development of robust, community-driven living guideline documents that are owned by the community and reviewed to keep relevant in a rapidly evolving technical environment. Community engagement and uptake survey data shows 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing, the way Canadian radiation treatment centers run their technical quality control programs. For a medium-sized center comprising six linear accelerators and a comprehensive brachytherapy program, we evaluate the physics workload to 1.5 full-time equivalent physicists per year to complete all QC tests listed in this suite. PACS number(s): 87.55.Qr, 87.56.Fc, 87.56.-v. © 2016 The Authors.

  13. Ultrasound guided distal peripheral nerve block of the upper limb: A technical review

    Directory of Open Access Journals (Sweden)

    Herman Sehmbi

    2015-01-01

    Full Text Available Upper extremity surgery is commonly performed under regional anesthesia. The advent of ultrasonography has made performing upper extremity nerve blocks relatively easy with a high degree of reliability. The proximal approaches to brachial plexus block such as supraclavicular plexus block, infraclavicular plexus block, or the axillary block are favored for the most surgical procedures of distal upper extremity. Ultrasound guidance has however made distal nerve blocks of the upper limb a technically feasible, safe and efficacious option. In recent years, there has thus been a resurgence of distal peripheral nerve blocks to facilitate hand and wrist surgery. In this article, we review the technical aspects of performing the distal blocks of the upper extremity and highlight some of the clinical aspects of their usage.

  14. International Clinical Guidelines for the Adoption of Digital Pathology: A Review of Technical Aspects.

    Science.gov (United States)

    García-Rojo, Marcial

    2016-01-01

    Digital slides, also called whole-slide images, are being evaluated to replace conventional microscopy, and several guidelines have been published. This paper reviews technical specifications of digital pathology systems that have been included in the guidelines and position papers from the Canadian Association of Pathologists, the College of American Pathologists, the American Telemedicine Association, the Digital Pathology Association, the Food and Drug Administration, the Centers for Medicare and Medicaid Services, the Centers for Disease Control and Prevention, the Society of Toxicologic Pathology, the European Commission, the Spanish Society of Anatomic Pathology, The Royal College of Pathologists and The Royal College of Pathologists of Australasia. In conclusion, most technical aspects are well covered by these guidelines, although they offer limited information regarding image quality and compression, and file formats.

  15. Measuring non-technical skills in medical emergency care: a review of assessment measures

    Directory of Open Access Journals (Sweden)

    Simon Cooper

    2010-01-01

    Full Text Available Simon Cooper1, Ruth Endacott2, Robyn Cant11School of Nursing and Midwifery, Monash University, Gippsland Campus, Churchill, Victoria, Australia; 2School of Nursing and Midwifery, University of Plymouth, Drake Circus, Plymouth UKAim: To review the literature on non-technical skills and assessment methods relevant to emergency care.Background: Non-technical skills (NTS include leadership, teamwork, decision making and situation awareness, all of which have an impact on healthcare outcomes. Significant concerns have been raised about the rates of adverse medical events, many of which are attributed to NTS failures.Methods: Ovid, Medline, ProQUEST, PsycINFO and specialty websites were searched for NTS measures using applicable access strategies, inclusion and exclusion criteria. Publications identified were assessed for relevance.Results: A range of non-technical skill measures relevant to emergency care was identified: leadership (n = 5, teamwork (n = 7, personality/behavior (n = 3 and situation awareness tools (n = 1. Of these, 9 have been used with emergency care populations/clinicians. All had varying degrees of reliability and validity. In the last decade there has been some development of teamwork measures specific to emergency care with a predominantly global and collective rating of broad skills.Conclusion: A variety of non-technical skill measures are available; only a few have been used in the emergency care arena. There is a need for an increase in the focused assessment of teamwork skills for a greater understanding of team performance to enhance patient safety in medical emergency care.Keywords: non-technical skills, teamwork, medical emergency, standards

  16. Research on the Theoretical System--Rai Sanyo and"the Influence of Enfeoffment"%赖山阳“封建之势”理论体系研究

    Institute of Scientific and Technical Information of China (English)

    张赫

    2012-01-01

    封建制是日本武士社会的政治形态,本文勾勒出了日本学者赖山阳"封建之势"这一理论体系图谱。该理论体系的显性因素包括两个方面:"势"属于历史哲学范畴,兼具连续性和更替性特点";制势之术"是以"天道"为出发点的具体政治策略。该理论的隐性因素是"势"的历史命运,山阳通过尊王贱霸的政治主张间接为"势"的衰落结局作出了判断,给幕末志士极大影响。但"封建之势"下天皇无责任的体制也在一定程度上促使军国主义兴起。%This paper outlines a Japanese scholar, Rai Sanyo, and his work relating to"the influence of enfeoffment". The system of enfeoffment is a political ideology from the society of Japanese samurai. The theory' s explicit nature includes two aspects: "influence" belongs to the category of historical philosophy, with characteristics of continuity and replacement; while "the way of controlling influence" is a specific political strategy. The theory' s implicit nature concerns the historical fate of "influence". Rai Sanyo made an indirect judgment for the decline of "influence" through his opinion on respecting the Mikado and debasing supremacy, which had an important impact on young men in the last days of the Tokugawa Shogunate. But this kind of system also to some extent prompted the rise of militarism.

  17. Advanced Mixed Waste Treatment Project melter system preliminary design technical review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Eddy, T.L.; Raivo, B.D.; Soelberg, N.R.; Wiersholm, O.

    1995-02-01

    The Idaho National Engineering Laboratory Advanced Mixed Waste Treatment Project sponsored a plasma are melter technical design review meeting to evaluate high-temperature melter system configurations for processing heterogeneous alpha-contaminated low-level radioactive waste (ALLW). Thermal processing experts representing Department of Energy contractors, the Environmental Protection Agency, and private sector companies participated in the review. The participants discussed issues and evaluated alternative configurations for three areas of the melter system design: plasma torch melters and graphite arc melters, offgas treatment options, and overall system configuration considerations. The Technical Advisory Committee for the review concluded that graphite arc melters are preferred over plasma torch melters for processing ALLW. Initiating involvement of stakeholders was considered essential at this stage of the design. For the offgas treatment system, the advisory committee raised the question whether to a use wet-dry or a dry-wet system. The committee recommended that the waste stream characterization, feed preparation, and the control system are essential design tasks for the high-temperature melter treatment system. The participants strongly recommended that a complete melter treatment system be assembled to conduct tests with nonradioactive surrogate waste material. A nonradioactive test bed would allow for inexpensive design and operational changes prior to assembling a system for radioactive waste treatment operations.

  18. INDEPENDENT REVIEW OF THE X-701B GROUNDWATER REMEDY, PORTSMOUTH, OHIO: TECHNICAL EVALUATION AND RECOMMENDATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Eddy-Dilek, C.; Costanza, J.; Rossabi, J.; Early, T.; Skubal, K.; Magnuson, C.

    2008-12-15

    The Department of Energy Portsmouth Paducah Project Office requested assistance from Department of Energy Office of Environmental Management (EM-22) to provide independent technical experts to evaluate past and ongoing remedial activities at the Portsmouth facility that were completed to address TCE contamination associated with the X-701B groundwater plume and to make recommendations for future efforts. The Independent Technical Review team was provided with a detailed and specific charter. The charter requested that the technical team first review the past and current activities completed for the X-701B groundwater remedy for trichloroethene (TCE) in accordance with a Decision Document that was issued by Ohio EPA on December 8, 2003 and a Work Plan that was approved by Ohio EPA on September 22, 2006. The remedy for X-701B divides the activities into four phases: Phase I - Initial Source Area Treatment, Phase II - Expanded Source Area Treatment, Phase III - Evaluation and Reporting, and Phase IV - Downgradient Remediation and Confirmation of Source Area Treatment. Phase I of the remedy was completed during FY2006, and DOE has now completed six oxidant injection events within Phase II. The Independent Technical Review team was asked to evaluate Phase II activities, including soil and groundwater results, and to determine whether or not the criteria that were defined in the Work Plan for the Phase II end point had been met. The following criteria are defined in the Work Plan as an acceptable Phase II end point: (1) Groundwater samples from the identified source area monitoring wells have concentrations below the Preliminary Remediation Goal (PRG) for TCE in groundwater, or (2) The remedy is no longer effective in removing TCE mass from the source area. In addition, the charter specifies that if the Review Team determines that the Phase II endpoint has not been reached, then the team should address the following issues: (1) If additional injection events are

  19. Technical Letter Report: Evaluation and Analysis of a Few International Periodic Safety Review Summary Reports

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, Omesh K. [Argonne National Lab., IL (United States). Environmental Science Division; Diercks, Dwight R. [Argonne National Lab., IL (United States). Nuclear Engineering Division; Ma, David Chia-Chiun [Argonne National Lab., IL (United States). Environmental Science Division; Garud, Yogendra S. [Argonne National Lab., IL (United States). Environmental Science Division

    2013-12-17

    and 1988. All of the reports reviewed were the regulator’s assessment of the PSR findings rather than the original PSR report, and all but one were English translations from the original language. In these reviews, it was found that most of the countries base their regulatory guidance to some extent (and often to a large extent) on U.S. design codes and standards, NRC regulatory guidance, and U.S. industry guidance. In addition, many of the observed operational technical issues and OpE events reported for U.S. reactors are also cited in the PSR reports. The PSR reports also identified a number of potential technical material/component performance issues and OpE events that are not commonly reported for U.S. plants.

  20. American Gastroenterological Association Institute Technical Review on the Role of Elastography in Chronic Liver Diseases.

    Science.gov (United States)

    Singh, Siddharth; Muir, Andrew J; Dieterich, Douglas T; Falck-Ytter, Yngve T

    2017-05-01

    Chronic liver diseases (CLDs), due to chronic hepatitis C; hepatitis B; nonalcoholic fatty liver diseases (NAFLD); and alcoholic liver disease, are a leading cause of morbidity and mortality globally. Early identification of patients with cirrhosis at high risk of progression to liver-related complications may facilitate timely care and improve outcomes. With risks and misclassification associated with invasive tests, such as liver biopsy, noninvasive imaging modalities for liver fibrosis assessment have gained popularity. Therefore, the American Gastroenterological Association prioritized clinical guidelines on the role of elastography in CLDs, focusing on vibration-controlled transient elastography (VCTE) and magnetic resonance elastography (MRE). To inform these clinical guidelines, the current technical review was developed in accordance with the Grading of Recommendations Assessment, Development and Evaluation (GRADE) framework for diagnostic accuracy studies. This technical review addresses focused questions related to: (1) comparative diagnostic performance of VCTE and MRE relative to nonproprietary, serum-based fibrosis markers for detection of cirrhosis in patients with hepatitis C virus (HCV), hepatitis B virus (HBV), NAFLD, and alcoholic liver diseases; (2) performance of specific VCTE-defined liver stiffness cutoffs as a test replacement strategy (to replace liver biopsy) in making key decisions in the management of patients with CLDs; and (3) performance of specific VCTE-defined liver stiffness cutoffs as a triage test to identify patients with low likelihood of harboring high-risk esophageal varices (EVs) or having clinically significant portal hypertension (for presurgical risk stratification). This technical review does not address performance of other noninvasive modalities for assessing fibrosis (eg, acoustic radiation force pulse imaging or shear wave elastography) or steatosis (controlled attenuation parameter or magnetic resonance imaging

  1. Loads Providing Ancillary Services: Review of InternationalExperience-- Technical Appendix: Market Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Grayson Heffner, Charles Goldman, Kintner-Meyer, M; Kirby, Brendan

    2007-05-01

    In this study, we examine the arrangements for andexperiences of end-use loads providing ancillary services (AS) in fiveelectricity markets: Australia, the United Kingdom (UK), the Nordicmarket, and the ERCOT and PJM markets in the United States. Our objectivein undertaking this review of international experience was to identifyspecific approaches or market designs that have enabled customer loads toeffectively deliver various ancillary services (AS) products. We hopethat this report will contribute to the ongoing discussion in the U.S.and elsewhere regarding what institutional and technical developments areneeded to ensure that customer loads can meaningfully participate in allwholesale electricity markets.

  2. Technical review of the Sandia Laboratories' Particle Beam Fusion Program

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-18

    This report considers the technical aspects of Sandia Laboratories' Particle Beam Fusion Program and examines the program's initial goals, the progress made to date towards reaching those goals, and the future plans or methods of reaching those original or modified goals. A summary of Sandia Laboratories' effort, which seeks to demonstrate that high voltage pulsed power generated high-current electron or light ion beams can be used to ignite a deuterium or tritium pellet, is provided. A brief review and assessment of the Sandia Pulse Power Program is given. Several critical issues and summaries of the committee members' opinions are discussed.

  3. A review of technical options for solar charging stations in Asia and Africa

    Directory of Open Access Journals (Sweden)

    R. H. Almeida

    2015-09-01

    Full Text Available Charging stations are an attractive solution to provide access to electricity to low income populations with low energy consumption in remote and off-grid areas. This paper reviews the state of the art of charging stations, with special focus on the technical options. Forty-five different actors in this field were analysed, based on academic publications, reports, online search and surveys. Results show that most stations are run in Sub Saharan Africa and South Asia, are powered by solar energy and although there are many different energy services targeted, the most popular services are charging batteries, mobile phones and lamps. The first charging station was installed in 1992 but most activities happen after 2005. This recent growth has been enabled by the falling cost of photovoltaic modules, learning effect, economies of scale, financial innovation, private sector involvement and worldwide dissemination of mobile phones. While in the first system the only purpose was to charge solar photovoltaic lanterns, the first multi-purpose station appeared in 2008. As expected, the technical challenges are mostly related to the use of batteries not only because they represent the component with shortest lifetime but also because if the battery is not for individual use, social questions arise due to poor definition of rights and duties of the customers. Furthermore, the development of a sustainable business model is also a challenge since this requires technical skills and system monitoring that are not usually available locally. Finally, it is also suggested that the minimum technical quality standards for charging stations should be defined and implemented.

  4. A Technical Review on Biomass Processing: Densification, Preprocessing, Modeling and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Christopher T. Wright

    2010-06-01

    It is now a well-acclaimed fact that burning fossil fuels and deforestation are major contributors to climate change. Biomass from plants can serve as an alternative renewable and carbon-neutral raw material for the production of bioenergy. Low densities of 40–60 kg/m3 for lignocellulosic and 200–400 kg/m3 for woody biomass limits their application for energy purposes. Prior to use in energy applications these materials need to be densified. The densified biomass can have bulk densities over 10 times the raw material helping to significantly reduce technical limitations associated with storage, loading and transportation. Pelleting, briquetting, or extrusion processing are commonly used methods for densification. The aim of the present research is to develop a comprehensive review of biomass processing that includes densification, preprocessing, modeling and optimization. The specific objective include carrying out a technical review on (a) mechanisms of particle bonding during densification; (b) methods of densification including extrusion, briquetting, pelleting, and agglomeration; (c) effects of process and feedstock variables and biomass biochemical composition on the densification (d) effects of preprocessing such as grinding, preheating, steam explosion, and torrefaction on biomass quality and binding characteristics; (e) models for understanding the compression characteristics; and (f) procedures for response surface modeling and optimization.

  5. The Effects of a Review in Grammar and Mechanics on the Quality of College Students' Technical/Business Writing.

    Science.gov (United States)

    Davis, Wes

    This experimental, statistical study investigated the effects that a review of grammar and writing mechanics would have on the overall quality of college students' documents in technical/business communication. In the experimental group of 25 students, the professor assigned several exercises in grammar and mechanics as a review related to…

  6. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  7. SCFA lead lab technical assistance review of the Pit 7 Complex source containment

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, D.; Janeday, D.; Woodward, D.; Imrich, J.; Evans, J.; Morris, M.; Reimus, P.; Hazen, T.

    2001-01-29

    On January 29-30, 2001 a technical assistance team (TAT) met with the Pit 7 project team at Lawrence Livermore National Laboratory (LLNL) to review technologies being evaluated for remediation in the Site 300 Pit 7 Complex and the process for selecting these technologies. Specifically, the project team presented the TAT with a core need to identify technically and economically practicable technologies and methods to stabilize, contain, or control the tritium and uranium in the source areas at the Pits 3 and 5 landfill area to prevent further releases of these contaminants to groundwater and the migration of tritiated and uranium-contaminated groundwater. The approaches and needs for the systems surrounding the landfills were also presented and discussed. With encouragement from the project team, the TAT expanded its focus to include additional site characterization, a water balance model, and computational models. The TAT was comprised of leading technical and regulatory experts from around the country and was assembled by SCFA's Lead Lab in response to a technical assistance request from John Ziagos, Project Manager for the Pit 7 Area (Technical Assistance Request: LLNL No.1). A list of the TAT members is included below and contact information the TAT members and site participants is in Appendix B. To familiarize the TAT assistance team with Pit 7 Complex issues, the project team gave a presentation outlining the site geology, contaminant hydrogeology, land-use issues, stakeholder concerns, regulatory requirements, groundwater flow and transport modeling efforts, pit source characterization efforts, and remedial options. Time for clarification and questions between the TAT and the site team was integrated into the presentation schedule. On the morning of the second day, the TAT reconvened with the site team and John Evans of the TAT presented information about a helium soil gas survey method that could potentially be used to locate and characterize tritium

  8. Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins, J.C.

    2010-01-31

    Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

  9. SRTC criticality safety technical review: Nuclear Criticality Safety Evaluation 93-04 enriched uranium receipt

    Energy Technology Data Exchange (ETDEWEB)

    Rathbun, R.

    1993-10-13

    Review of NMP-NCS-930087, {open_quotes}Nuclear Criticality Safety Evaluation 93-04 Enriched Uranium Receipt (U), July 30, 1993, {close_quotes} was requested of SRTC (Savannah River Technology Center) Applied Physics Group. The NCSE is a criticality assessment to determine the mass limit for Engineered Low Level Trench (ELLT) waste uranium burial. The intent is to bury uranium in pits that would be separated by a specified amount of undisturbed soil. The scope of the technical review, documented in this report, consisted of (1) an independent check of the methods and models employed, (2) independent HRXN/KENO-V.a calculations of alternate configurations, (3) application of ANSI/ANS 8.1, and (4) verification of WSRC Nuclear Criticality Safety Manual procedures. The NCSE under review concludes that a 500 gram limit per burial position is acceptable to ensure the burial site remains in a critically safe configuration for all normal and single credible abnormal conditions. This reviewer agrees with that conclusion.

  10. Spent fuel sabotage test program, characterization of aerosol dispersal : technical review and analysis supplement.

    Energy Technology Data Exchange (ETDEWEB)

    Durbin, Samuel G.; Lindgren, Eric Richard

    2009-07-01

    This project seeks to provide vital data required to assess the consequences of a terrorist attack on a spent fuel transportation cask. One such attack scenario involves the use of conical shaped charges (CSC), which are capable of damaging a spent fuel transportation cask. In the event of such an attack, the amount of radioactivity that may be released as respirable aerosols is not known with great certainty. Research to date has focused on measuring the aerosol release from single short surrogate fuel rodlets subjected to attack by a small CSC device in various aerosol chamber designs. The last series of three experiments tested surrogate fuel rodlets made with depleted uranium oxide ceramic pellets in a specially designed double chamber aerosol containment apparatus. This robust testing apparatus was designed to prevent any radioactive release and allow high level radioactive waste disposal of the entire apparatus following testing of actual spent fuel rodlets as proposed. DOE and Sandia reviews of the project to date identified a number of issues. The purpose of this supplemental report is to address and document the DOE review comments and to resolve the issues identified in the Sandia technical review.

  11. Report of the technical review team on the Catalytic Extraction Process

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The TRT was impressed with the quality and volume of laboratory and pilot scale development work that had been conducted over the past year. Many of the doubts and questions raised by the TRP on technical details had been examined, either by theoretical calculations or in the pilot facility. Moreover, a more open and forthcoming attitude was evident among the MMT staff who either presented briefings or responded to the Team`s questions. Of special note to DOE, the TRP recognized a year ago that the pilot facility at Fall River was not designed for radioactive pilot tests. However, from the dialogue surrounding the TRP review, it was evident that not much thought had been given to the hazards, concerns, and special requirements incumbent with radioactive operations -- everything from doing pours of hot radioactive metal from a vessel to remote-handling equipment and operations. This year the TRT noticed a significant improvement in this respect.

  12. Advanced Fast Reactor - 100 (AFR-100) Report for the Technical Review Panel

    Energy Technology Data Exchange (ETDEWEB)

    Grandy, Christopher [Argonne National Lab. (ANL), Argonne, IL (United States); Sienicki, James J. [Argonne National Lab. (ANL), Argonne, IL (United States); Moisseytsev, Anton [Argonne National Lab. (ANL), Argonne, IL (United States); Krajtl, Lubomir [Argonne National Lab. (ANL), Argonne, IL (United States); Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Kim, Taek K. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, B. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2014-06-04

    This report is written to provide an overview of the Advanced Fast Reactor-100 in the requested format for a DOE technical review panel. This report was prepared with information that is responsive to the DOE Request for Information, DE-SOL-0003674 Advanced Reactor Concepts, dated February 27, 2012 from DOE’s Office of Nuclear Energy, Office of Nuclear Reactor Technologies. The document consists of two main sections. The first section is a summary of the AFR-100 design including the innovations that are incorporated into the design. The second section contains a series of tables that respond to the various questions requested of the reactor design team from the subject DOE RFI.

  13. Technical Review of the CENWP Computational Fluid Dynamics Model of the John Day Dam Forebay

    Energy Technology Data Exchange (ETDEWEB)

    Rakowski, Cynthia L.; Serkowski, John A.; Richmond, Marshall C.

    2010-12-01

    The US Army Corps of Engineers Portland District (CENWP) has developed a computational fluid dynamics (CFD) model of the John Day forebay on the Columbia River to aid in the development and design of alternatives to improve juvenile salmon passage at the John Day Project. At the request of CENWP, Pacific Northwest National Laboratory (PNNL) Hydrology Group has conducted a technical review of CENWP's CFD model run in CFD solver software, STAR-CD. PNNL has extensive experience developing and applying 3D CFD models run in STAR-CD for Columbia River hydroelectric projects. The John Day forebay model developed by CENWP is adequately configured and validated. The model is ready for use simulating forebay hydraulics for structural and operational alternatives. The approach and method are sound, however CENWP has identified some improvements that need to be made for future models and for modifications to this existing model.

  14. Technical cooperation on nuclear security between the United States and China : review of the past and opportunities for the future.

    Energy Technology Data Exchange (ETDEWEB)

    Pregenzer, Arian Leigh

    2011-12-01

    The United States and China are committed to cooperation to address the challenges of the next century. Technical cooperation, building on a long tradition of technical exchange between the two countries, can play an important role. This paper focuses on technical cooperation between the United States and China in the areas of nonproliferation, arms control and other nuclear security topics. It reviews cooperation during the 1990s on nonproliferation and arms control under the U.S.-China Arms Control Exchange, discusses examples of ongoing activities under the Peaceful Uses of Technology Agreement to enhance security of nuclear and radiological material, and suggests opportunities for expanding technical cooperation between the defense nuclear laboratories of both countries to address a broader range of nuclear security topics.

  15. 1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H. C.; Singhal, S. C.; Stone, C.; Wheeler, D.

    2010-11-01

    This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

  16. Constructing a Validity Argument for the Objective Structured Assessment of Technical Skills (OSATS): A Systematic Review of Validity Evidence

    Science.gov (United States)

    Hatala, Rose; Cook, David A.; Brydges, Ryan; Hawkins, Richard

    2015-01-01

    In order to construct and evaluate the validity argument for the Objective Structured Assessment of Technical Skills (OSATS), based on Kane's framework, we conducted a systematic review. We searched MEDLINE, EMBASE, CINAHL, PsycINFO, ERIC, Web of Science, Scopus, and selected reference lists through February 2013. Working in duplicate, we selected…

  17. 1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H. C.; Singhal, S. C.; Stone, C.; Wheeler, D.

    2010-11-01

    This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

  18. Boiling eXperiment Facility (BXF) Fluid Toxicity Technical Interchange Meeting (TIM) with the Payload Safety Review Panel (PSRP)

    Science.gov (United States)

    Sheredy, William A.

    2012-01-01

    A Technical Interchange meeting was held between the payload developers for the Boiling eXperiment Facility (BXF) and the NASA Safety Review Panel concerning operational anomaly that resulted in overheating one of the fluid heaters, shorted a 24VDC power supply and generated Perfluoroisobutylene (PFiB) from Perfluorohexane.

  19. 77 FR 30335 - Proposed Revision 3 to Standard Review Plan, Section 19.1 on Determining the Technical Adequacy...

    Science.gov (United States)

    2012-05-22

    ... Probabilistic Risk Assessment for Risk-Informed License Amendment Requests After Initial Fuel Load AGENCY... of Safety Analysis Reports for Nuclear Power Plants: LWR Edition,'' on a proposed Revision 3 to Standard Review Plan (SRP), Section 19.1, ``Determining the Technical Adequacy of Probabilistic...

  20. 23 CFR 636.305 - Can price information be provided to analysts who are reviewing technical proposals?

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Can price information be provided to analysts who are reviewing technical proposals? 636.305 Section 636.305 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS DESIGN-BUILD CONTRACTING Proposal...

  1. 75 FR 22148 - Request for the Technical Review of 22 Draft Skin Notation Assignments and Skin Notation Profiles

    Science.gov (United States)

    2010-04-27

    ... Profiles were developed to provide the scientific rationale behind the hazard-specific skin notation (SK... Skin Notation Assignments and Skin Notation Profiles AGENCY: National Institute for Occupational Safety... public review of the draft skin notations and support technical documents entitled ``Skin Notations...

  2. 78 FR 70047 - Request for the Technical Review of 25 Draft Skin Notation Assignments and Skin Notation Profiles

    Science.gov (United States)

    2013-11-22

    ... draft Skin Notation Profiles were developed to provide the scientific rationale behind the hazard... Skin Notation Assignments and Skin Notation Profiles AGENCY: National Institute for Occupational Safety... review of the draft skin notations and supporting technical documents entitled, Skin Notations Profiles...

  3. SUPPLEMENTAL COLUMBIA RIVER PROTECTION ACTIVITIES AT THE DEPARTMENT OF ENERGY HANFORD SITE 2008 TECHNICAL REVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B; Dawn S. Kaback, D; Eugene L. LeBoeuf, E; Joe Rossabi, J; Karen L. Skubal, K; David L. Cocke, D; Paul C. Deutsch, P

    2008-09-30

    Beginning in 2006, the US Department of Energy (DOE) supported nine applied research projects to improve the protection of the Columbia River and mitigate the impacts of Hanford Site groundwater. These projects were funded through a supplemental Congressional budget allocation, and are now in various stages of completion in accordance with the research plans. The DOE Office of Environmental Management Groundwater and Soil Cleanup Technologies (EM-22) sponsored a technical peer review meeting for these projects in Richland WA, July 28-31, 2008. The overall objective of the peer review is to provide information to support DOE decisions about the status and potential future application of the various technologies. The charge for the peer review panel was to develop recommendations for each of the nine 'technologies'. Team members for the July 2008 review were Brian Looney, Gene LeBoeuf, Dawn Kaback, Karen Skubal, Joe Rossabi, Paul Deutsch, and David Cocke. Previous project reviews were held in May 2007 and March-May of 2006. The team used the following four rating categories for projects: (a) Incorporate the technology/strategy in ongoing and future EM activities; (b) Finish existing scope of applied research and determine potential for EM activities when research program is finished; (c) Discontinue current development activities and do not incorporate technology/strategy into ongoing and future EM activities unless a significant and compelling change in potential viability is documented; and (d) Supplement original funded work to obtain the data needed to support a DOE decision to incorporate the technology into ongoing and future EM activities. The supplemental funding portfolio included two projects that addressed strontium, five projects that addressed chromium, one project that addressed uranium and one project that addressed carbon tetrachloride. The projects ranged from in situ treatment methods for immobilizing contaminants using chemical

  4. 76 FR 24065 - Board Workshop: June 6-7, 2011-Arlington, Virginia; the U.S. Nuclear Waste Technical Review Board...

    Science.gov (United States)

    2011-04-29

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Workshop: June 6-7, 2011--Arlington, Virginia; the U.S. Nuclear Waste Technical Review Board Will Hold a Workshop on Methods for Evaluating Nuclear Waste Streams Pursuant to its...

  5. Review of occupational safety and health activities in Southern Africa funded under the DANIDA/ILO framework agreement on technical cooperation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jørgensen, Claus

    2003-01-01

    A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation.......A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation....

  6. Review of occupational safety and health activities in Southern Africa funded under the DANIDA/ILO framework agreement on technical cooperation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jørgensen, Claus

    2003-01-01

    A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation.......A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation....

  7. A Technical Review of Penning Trap based Investigations in Neutron Decay

    CERN Document Server

    Byrne, J

    2014-01-01

    This review is concerned with a detailed analysis of some of the technical problems which arise in the application of the Penning trap method to the experimental study of neutron $\\beta $ -decay,a technique which was first successfully tested on the low-flux swimming-pool reactor LIDO (capture flux =3$\\cdot 10^6$cm$^(-2)$s$^(-1)$) at AERE Harwell in the 1970's. It does not discuss the scientific merits or demerits of these studies. Of particular importance are the trapping and release of neutron decay protons, and the influence of magnetic mirror effects and radial drifting on the trapped particles. Since these have energies < 1 keV they must be accelerated to energies of order 20-30 keV following release, at which point they are recorded in a silicon surface barrier detector. However serious difficulties were encountered in the post-release acceleration process with vacuum breakdown in the presence of crossed electric and magnetic fields.

  8. Review of the Technical Status on the Debris Bed Cooling Model

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Eui Kwang; Cho, Chung Ho; Lee, Yong Bum

    2007-09-15

    Preliminary safety analyses of the KALIMER-600 design have shown that the design has inherent safety characteristics and is capable of accommodating double-fault initiators such as ATWS events without coolant boiling or fuel melting. However, for the future design of sodium cooled fast reactor, the evaluation of the safety performance and the determination of containment requirements may be worth due consideration of triple-fault accident sequences of extremely low probability of occurrence that leads to core melting. For any postulated accident sequence which leads to core melting, in-vessel retention of the core debris will be required as a design requirement for the future design of sodium cooled fast reactor. Also, proof of the capacity of the debris bed cooling is an essential condition to solve the problem of in-vessel retention of the core debris. In this study, review of the technical status on the debris bed cooling model was carried out for in-vessel retention of the core debris0.

  9. A technical review of optical mapping of intracellular calcium within myocardial tissue.

    Science.gov (United States)

    Jaimes, Rafael; Walton, Richard D; Pasdois, Philippe; Bernus, Olivier; Efimov, Igor R; Kay, Matthew W

    2016-06-01

    Optical mapping of Ca(2+)-sensitive fluorescence probes has become an extremely useful approach and adopted by many cardiovascular research laboratories to study a spectrum of myocardial physiology and disease conditions. Optical mapping data are often displayed as detailed pseudocolor images, providing unique insight for interpreting mechanisms of ectopic activity, action potential and Ca(2+) transient alternans, tachycardia, and fibrillation. Ca(2+)-sensitive fluorescent probes and optical mapping systems continue to evolve in the ongoing effort to improve therapies that ease the growing worldwide burden of cardiovascular disease. In this technical review we provide an updated overview of conventional approaches for optical mapping of Cai (2+) within intact myocardium. In doing so, a brief history of Cai (2+) probes is provided, and nonratiometric and ratiometric Ca(2+) probes are discussed, including probes for imaging sarcoplasmic reticulum Ca(2+) and probes compatible with potentiometric dyes for dual optical mapping. Typical measurements derived from optical Cai (2+) signals are explained, and the analytics used to compute them are presented. Last, recent studies using Cai (2+) optical mapping to study arrhythmias, heart failure, and metabolic perturbations are summarized.

  10. Fitness for duty in the nuclear power industry: A review of technical issues

    Energy Technology Data Exchange (ETDEWEB)

    Moore, C.; Barnes, V.; Hauth, J.; Wilson, R.; Fawcett-Long, J.; Toquam, J.; Baker, K.; Wieringa, D.; Olson, J.; Christensen, J.

    1989-05-01

    This report presents information gathered and analyzed in support of the US Nuclear Regulatory Commission's (NRC's) efforts to develop a rule that will ensure that workers with unescorted access to protected areas of nuclear power plants are fit for duty. This report supplements information previously published in NUREG/CR-5227, Fitness for Duty in the Nuclear Power Industry: A Review of Technical Issues (Barnes et al., 1988). The primary potential fitness-for-duty concern addressed in both of these reports is impairment caused by substance abuse, although other fitness concerns are discussed. This report addresses issues pertaining to workers' use and misuse of alcohol, prescription drugs, and over-the-counter drugs as fitness-for-duty concerns; responds to several questions raised by NRC Commissioners; discusses subversion of the chemical testing process and methods of preventing such subversion; and examines concerns about the urinalysis cutoff levels used when testing for marijuana metabolites, amphetamines, and phencyclidine (PCP).

  11. INDEPENDENT TECHNICAL REVIEW OF THE C-400 INTERIM REMEDIAL PROJECT PHASE I RESULTS, PADUCAH, KENTUCKY

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Rossabi, J.; Stewart,L.; Richards, W.

    2010-10-29

    The groundwater and soil in the vicinity of the C-400 Building at the Paducah Gaseous Diffusion Plant (PGDP), is contaminated with substantial quantities of industrial solvents, primarily trichoroethene (TCE). This solvent 'source' is recognized as a significant challenge and an important remediation target in the overall environmental cleanup strategy for PGDP. Thus, the cleanup of the C-400 TCE Source is a principal focus for the Department of Energy (DOE) and its contractors, and for PGDP regulators and stakeholders. Using a formal investigation, feasibility study and decision process, Electrical Resistance Heating (ERH) was selected for the treatment of the soil and groundwater in the vicinity of C-400. ERH was selected as an interim action to remove 'a significant portion of the contaminant mass of TCE at the C-400 Cleaning Building area through treatment' with the longer term goal of reducing 'the period the TCE concentration in groundwater remains above its Maximum Contaminant Level (MCL).' ERH is a thermal treatment that enhances the removal of TCE and related solvents from soil and groundwater. The heterogeneous conditions at PGDP, particularly the high permeability regional gravel aquifer (RGA), are challenging to ERH. Thus, a phased approach is being followed to implement this relatively expensive and complex remediation technology. Conceptually, the phased approach encourages safety and efficiency by providing a 'lessons learned' process and allowing appropriate adjustments to be identified and implemented prior to follow-on phase(s) of treatment. More specifically, early deployment targeted portions of the challenging RGA treatment zone with relatively little contamination reducing the risk of adverse collateral impacts from underperformance in terms of heating and capture. Because of the importance and scope of the C-400 TCE source remediation activities, DOE chartered an Independent Technical Review (ITR) in

  12. A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

    Science.gov (United States)

    Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

    1982-01-01

    Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

  13. Non-technical skills assessment for prelicensure nursing students: An integrative review.

    Science.gov (United States)

    Pires, Sara; Monteiro, Sara; Pereira, Anabela; Chaló, Daniela; Melo, Elsa; Rodrigues, Alexandre

    2017-11-01

    In nursing, non-technical skills are recognized as playing an important role to increase patient safety and successful clinical outcomes (Pearson and McLafferty, 2011). Non-technical skills are cognitive and social resource skills that complement technical skills and contribute to safe and efficient task performance (Flin et al., 2008). In order to effectively provide non-technical skills training, it is essential to have an instrument to measure these skills. An online search was conducted. Articles were selected if they referred to and/or described instruments assessing non-technical skills for nurses and/or prelicensure nursing students in educational, clinical and/or simulated settings with validation evidence (inclusion criteria). Of the 53 articles located, 26 met the inclusion criteria. Those referred to and/or described 16 instruments with validation evidence developed to assess non-technical skills in multidisciplinary teams including nurses. Although articles have shown 16 valid and reliable instruments, to our knowledge, no instrument has been published or developed and validated for the assessment of non-technical skills of only nurses in general, relevant for use in high-fidelity simulation-based training for prelicensure nursing students. Therefore, there is a need for the development of such an instrument. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

    Energy Technology Data Exchange (ETDEWEB)

    Song, Yo Taik

    2001-01-01

    Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented.

  15. US technical assistance to the IAEA and the chemical weapons convection (CWC) - a review and look to the future

    Energy Technology Data Exchange (ETDEWEB)

    Indusi, J.; Parsick, R.J.; Reisman, A.W.

    1997-08-01

    This paper reviews the Safeguards mandate of the International Atomic Energy Agency (IAEA) and describes U.S. technical support programs. We also review the mandate of the Chemical Weapons Convention (CWC) and speculate on the technical areas where U.S. assistance may prove useful. The IAEA was organized in 1957 in response to President Eisenhower`s {open_quotes}Atoms for Peace{close_quotes} initiative presented to the UN General Assembly on December 8, 1953. The Organization for the Prohibition of Chemical Weapons (OPCW) has been organized by a Preparatory Commission (PREPCOM) to prepare for the entry-into-force of this new convention which prohibits the development, production, stockpiling and use of chemical weapons and on their destruction. The safeguards mandate of the IAEA is to carry out verifications of nuclear material pursuant to the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) and other voluntary but legally binding agreements. U.S. technical support programs have provided and continue to provide assistance in the form of Cost-Free Experts (CFE`s), systems studies on new safeguards approaches, training, computerized information systems, and equipment for nuclear materials measurements and containment and surveillance systems. Because the CWC just recently entered into force (April 29, 1997), verification procedures of the OPCW are not yet fully developed. However, it is expected, and can already be seen for many aspects of the technical task, that there are many similarities between the verification activities of the OPCW and those carried out by the IAEA. This paper will discuss potential technical support areas that can help strengthen the OPCW. 9 refs.

  16. Review of Technical Issues Related to Predicting Isotopic Compositions and Source Terms for High-Burnup LWR Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Gauld, I. C.; Parks, C. V.

    2000-12-11

    This report has been prepared to review the technical issues important to the prediction of isotopic compositions and source terms for high-burnup, light-water-reactor (LWR) fuel as utilized in the licensing of spent fuel transport and storage systems. The current trend towards higher initial 235U enrichments, more complex assembly designs, and more efficient fuel management schemes has resulted in higher spent fuel burnups than seen in the past. This trend has led to a situation where high-burnup assemblies from operating LWRs now extend beyond the area where available experimental data can be used to validate the computational methods employed to calculate spent fuel inventories and source terms. This report provides a brief review of currently available validation data, including isotopic assays, decay heat measurements, and shielded dose-rate measurements. Potential new sources of experimental data available in the near term are identified. A review of the background issues important to isotopic predictions and some of the perceived technical challenges that high-burnup fuel presents to the current computational methods are discussed. Based on the review, the phenomena that need to be investigated further and the technical issues that require resolution are presented. The methods and data development that may be required to address the possible shortcomings of physics and depletion methods in the high-burnup and high-enrichment regime are also discussed. Finally, a sensitivity analysis methodology is presented. This methodology is currently being investigated at the Oak Ridge National Laboratory as a computational tool to better understand the changing relative significance of the underlying nuclear data in the different enrichment and burnup regimes and to identify the processes that are dominant in the high-burnup regime. The potential application of the sensitivity analysis methodology to help establish a range of applicability for experimental

  17. Technical Review of Law Enforcement Standards and Guides Relative to Incident Management

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, Robert D.; Salter, R.; Stanton, J. R.; Fisher, D.

    2009-03-24

    In an effort to locate potential law enforcement-related standards that support incident management, a team from the Pacific Northwest National Laboratory (PNNL) contacted representatives from the National Institute of Standards-Office of Law Enforcement Standards (NIST-OLES), National Institute of Justice (NIJ), Federal Bureau of Investigation (FBI), Secret Service, ASTM International committees that have a law enforcement focus, and a variety of individuals from local and regional law enforcement organizations. Discussions were held with various state and local law enforcement organizations. The NIJ has published several specific equipment-related law enforcement standards that were included in the review, but it appears that law enforcement program and process-type standards are developed principally by organizations that operate at the state and local level. Input is provided from state regulations and codes and from external non-government organizations (NGOs) that provide national standards. The standards that are adopted from external organizations or developed independently by state authorities are available for use by local law enforcement agencies on a voluntary basis. The extent to which they are used depends on the respective jurisdictions involved. In some instances, use of state and local disseminated standards is mandatory, but in most cases, use is voluntary. Usually, the extent to which these standards are used appears to depend on whether or not jurisdictions receive certification from a “governing” entity due to their use and compliance with the standards. In some cases, these certification-based standards are used in principal but without certification or other compliance monitoring. In general, these standards appear to be routinely used for qualification, selection for employment, and training. In these standards, the term “Peace Officer” is frequently used to refer to law enforcement personnel. This technical review of national law

  18. Transorbital Approach for Endovascular Occlusion of Carotid-Cavernous Fistulas: Technical Note and Review of the Literature

    Science.gov (United States)

    Chen, Ching-Jen; Caruso, James P; Ding, Dale; Schmitt, Paul J; Buell, Thomas J; Raper, Daniel M; Evans, Avery; Newman, Steven A; Jensen, Mary E

    2017-01-01

    Carotid-cavernous fistulas (CCFs) pose an anatomically and physiologically challenging problem for clinicians. The most common method of treatment for these lesions is transvenous endovascular embolization via the inferior petrosal sinus or the facial vein. When transvenous access is not possible, an alternate approach must be devised. We describe a case example with bilateral Barrow Type B CCFs, which were inaccessible using the traditional transvenous approach. Hence, a direct transorbital approach, performed under fluoroscopic guidance, was employed to successfully obliterate the CCF. At five months follow-up, the patient was recovering without complications. This case delineates the technical aspects of transorbital CCF embolization and demonstrates that this approach is a viable alternative to conventional transvenous methods for appropriately selected CCF cases. We supplement our case example and technical note with a literature review of this approach. PMID:28191380

  19. Proceedings of the technical review on advances in geothermal reservoir technology---Research in progress

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J. (ed.)

    1988-09-01

    This proceedings contains 20 technical papers and abstracts describing most of the research activities funded by the Department of Energy (DOE's) Geothermal Reservoir Technology Program, which is under the management of Marshall Reed. The meeting was organized in response to several requests made by geothermal industry representatives who wanted to learn more about technical details of the projects supported by the DOE program. Also, this gives them an opportunity to personally discuss research topics with colleagues in the national laboratories and universities.

  20. Index to Nuclear Safety: a technical progress review by chrology, permuted title, and author, Volume 11(1) through Volume 20(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W B; Passiakos, M

    1980-06-01

    This index to Nuclear Safety, a bimonthly technical progress review, covers articles published in Nuclear Safety, Volume II, No. 1 (January-February 1970), through Volume 20, No. 6 (November-December 1979). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 600 technical articles published in Nuclear Safety in the last ten years are listed in this index.

  1. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  2. Accreditation System for Technical Education Programmes in India: A Critical Review

    Science.gov (United States)

    Prasad, G.; Bhar, C.

    2010-01-01

    This paper gives an overview of the Indian technical education system with regard to both its quantitative and qualitative scenario and upholds the value of accreditation in quality improvement and quality assurance of educational programmes. The paper presents a comparison of accreditation systems being followed in some important countries,…

  3. Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

    Science.gov (United States)

    Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

    2013-12-01

    Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

  4. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  5. High-temperature liquid-metal technology review. A Bimonthly Technical Progress Review, Volume 7, Number 2, April 1969

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1969-04-01

    The purpose of the High-Temperature Liquid-Metal Technology Review is to provide up-to-date information on the various research and development programs in the United States in the field of high-temperature liquid-metal technology. The method is to publish reviews prepared by members of the Department of Applied Science of the Brookhaven National Laboratory on current topical and progress reports submitted by contracting organizations. When results and conclusions are reported, it is intended that the individual reviews become both summaries and critiques. Thirteen reviews are presented in this issue.

  6. Task Order 22 – Engineering and Technical Support, Deep Borehole Field Test. AREVA Summary Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Denton, Mark A. [AREVA Federal Services, Charlotte, NC (United States)

    2016-01-19

    Under Task Order 22 of the industry Advisory and Assistance Services (A&AS) Contract to the Department of Energy (DOE) DE-NE0000291, AREVA has been tasked with providing assistance with engineering, analysis, cost estimating, and design support of a system for disposal of radioactive wastes in deep boreholes (without the use of radioactive waste). As part of this task order, AREVA was requested, through a letter of technical direction, to evaluate Sandia National Laboratory’s (SNL’s) waste package borehole emplacement system concept recommendation using input from DOE and SNL. This summary review report (SRR) documents this evaluation, with its focus on the primary input document titled: “Deep Borehole Field Test Specifications/M2FT-15SN0817091” Rev. 1 [1], hereafter referred to as the “M2 report.” The M2 report focuses on the conceptual design development for the Deep Borehole Field Test (DBFT), mainly the test waste packages (WPs) and the system for demonstrating emplacement and retrieval of those packages in the Field Test Borehole (FTB). This SRR follows the same outline as the M2 report, which allows for easy correlation between AREVA’s review comments, discussion, potential proposed alternatives, and path forward with information established in the M2 report. AREVA’s assessment focused on three primary elements of the M2 report: the conceptual design of the WPs proposed for deep borehole disposal (DBD), the mode of emplacement of the WP into DBD, and the conceptual design of the DBFT. AREVA concurs with the M2 report’s selection of the wireline emplacement mode specifically over the drill-string emplacement mode and generically over alternative emplacement modes. Table 5-1 of this SRR compares the pros and cons of each emplacement mode considered viable for DBD. The primary positive characteristics of the wireline emplacement mode include: (1) considered a mature technology; (2) operations are relatively simple; (3) probability of a

  7. Task Order 22 – Engineering and Technical Support, Deep Borehole Field Test. AREVA Summary Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Denton, Mark A. [AREVA Federal Services, Charlotte, NC (United States)

    2016-01-19

    Under Task Order 22 of the industry Advisory and Assistance Services (A&AS) Contract to the Department of Energy (DOE) DE-NE0000291, AREVA has been tasked with providing assistance with engineering, analysis, cost estimating, and design support of a system for disposal of radioactive wastes in deep boreholes (without the use of radioactive waste). As part of this task order, AREVA was requested, through a letter of technical direction, to evaluate Sandia National Laboratory’s (SNL’s) waste package borehole emplacement system concept recommendation using input from DOE and SNL. This summary review report (SRR) documents this evaluation, with its focus on the primary input document titled: “Deep Borehole Field Test Specifications/M2FT-15SN0817091” Rev. 1 [1], hereafter referred to as the “M2 report.” The M2 report focuses on the conceptual design development for the Deep Borehole Field Test (DBFT), mainly the test waste packages (WPs) and the system for demonstrating emplacement and retrieval of those packages in the Field Test Borehole (FTB). This SRR follows the same outline as the M2 report, which allows for easy correlation between AREVA’s review comments, discussion, potential proposed alternatives, and path forward with information established in the M2 report. AREVA’s assessment focused on three primary elements of the M2 report: the conceptual design of the WPs proposed for deep borehole disposal (DBD), the mode of emplacement of the WP into DBD, and the conceptual design of the DBFT. AREVA concurs with the M2 report’s selection of the wireline emplacement mode specifically over the drill-string emplacement mode and generically over alternative emplacement modes. Table 5-1 of this SRR compares the pros and cons of each emplacement mode considered viable for DBD. The primary positive characteristics of the wireline emplacement mode include: (1) considered a mature technology; (2) operations are relatively simple; (3) probability of a

  8. Efficacy of simulation-based trauma team training of non-technical skills. A systematic review.

    Science.gov (United States)

    Gjeraa, K; Møller, T P; Østergaard, D

    2014-08-01

    Trauma resuscitation is a complex situation, and most organisations have multi-professional trauma teams. Non-technical skills are challenged during trauma resuscitation, and they play an important role in the prevention of critical incidents. Simulation-based training of these is recommended. Our research question was: Does simulation-based trauma team training of non-technical skills have effect on reaction, learning, behaviour or patient outcome? The authors searched PubMed, EMBASE and the Cochrane Library and found 13 studies eligible for analysis. We described and compared the educational interventions and the evaluations of effect according to the four Kirkpatrick levels: reaction, learning (knowledge, skills, attitudes), behaviour (in a clinical setting) and patient outcome. No studies were randomised, controlled and blinded, resulting in a moderate to high risk of bias. The multi-professional trauma teams had positive reactions to simulation-based training of non-technical skills. Knowledge and skills improved in all studies evaluating the effect on learning. Three studies found improvements in team performance (behaviour) in the clinical setting. One of these found difficulties in maintaining these skills. Two studies evaluated on patient outcome, of which none showed improvements in mortality, complication rate or duration of hospitalisation. A significant effect on learning was found after simulation-based training of the multi-professional trauma team in non-technical skills. Three studies demonstrated significantly increased clinical team performance. No effect on patient outcome was found. All studies had a moderate to high risk of bias. More comprehensive randomised studies are needed to evaluate the effect on patient outcome.

  9. Strengthening Technical Peer Review at the Army S&T Laboratories

    Science.gov (United States)

    2009-03-01

    The assumption underlying the value of peer review is that the quality of work is substantiated or improved through critiques by individuals who are...in shaping future work. The use of peer review , using experts in possession of varied and extensive experience, can much improve the quality of work...and efficacy of results. The Army Science and Technology Executive, Dr. Thomas Killion, requested a study of peer review methods in use at Army

  10. Scientific and technical advisory committee review of the nutrient inputs to the watershed model

    Science.gov (United States)

    The following is a report by a STAC Review Team concerning the methods and documentation used by the Chesapeake Bay Partnership for evaluation of nutrient inputs to Phase 6 of the Chesapeake Bay Watershed Model. The “STAC Review of the Nutrient Inputs to the Watershed Model” (previously referred to...

  11. Report of the technical review of the sixth national communication of Australia

    DEFF Research Database (Denmark)

    Buendia, Leandro; Nielsen, Ole-Kenneth; Sempos, Ioannis;

    The review took place from 7 to 12 October 2014 in Canberra, Australia, and was conducted by the following team of nominated experts from the UNFCCC roster of experts......The review took place from 7 to 12 October 2014 in Canberra, Australia, and was conducted by the following team of nominated experts from the UNFCCC roster of experts...

  12. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1977-02-23

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication.

  13. Quantitative imaging biomarkers: a review of statistical methods for technical performance assessment.

    Science.gov (United States)

    Raunig, David L; McShane, Lisa M; Pennello, Gene; Gatsonis, Constantine; Carson, Paul L; Voyvodic, James T; Wahl, Richard L; Kurland, Brenda F; Schwarz, Adam J; Gönen, Mithat; Zahlmann, Gudrun; Kondratovich, Marina V; O'Donnell, Kevin; Petrick, Nicholas; Cole, Patricia E; Garra, Brian; Sullivan, Daniel C

    2015-02-01

    Technological developments and greater rigor in the quantitative measurement of biological features in medical images have given rise to an increased interest in using quantitative imaging biomarkers to measure changes in these features. Critical to the performance of a quantitative imaging biomarker in preclinical or clinical settings are three primary metrology areas of interest: measurement linearity and bias, repeatability, and the ability to consistently reproduce equivalent results when conditions change, as would be expected in any clinical trial. Unfortunately, performance studies to date differ greatly in designs, analysis method, and metrics used to assess a quantitative imaging biomarker for clinical use. It is therefore difficult or not possible to integrate results from different studies or to use reported results to design studies. The Radiological Society of North America and the Quantitative Imaging Biomarker Alliance with technical, radiological, and statistical experts developed a set of technical performance analysis methods, metrics, and study designs that provide terminology, metrics, and methods consistent with widely accepted metrological standards. This document provides a consistent framework for the conduct and evaluation of quantitative imaging biomarker performance studies so that results from multiple studies can be compared, contrasted, or combined. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  14. Debriefing after simulation-based non-technical skill training in healthcare: a systematic review of effective practice.

    Science.gov (United States)

    Garden, A L; Le Fevre, D M; Waddington, H L; Weller, J M

    2015-05-01

    Non-technical skills training in healthcare frequently uses high-fidelity simulation followed by a facilitated discussion known as debriefing. This type of training is mandatory for anaesthesia training in Australia and New Zealand. Debriefing by a skilled facilitator is thought to be essential for new learning through feedback and reflective processes. Key elements of effective debriefing need to be clearly identified to ensure that the training is evidence-based. We undertook a systematic review of empirical studies where elements of debriefing have been systematically manipulated during non-technical skills training. Eight publications met the inclusion criteria, but seven of these were of limited generalisability. The only study that was generalisable found that debriefing by novice instructors using a script improved team leader performance in paediatric resuscitation. The remaining seven publications were limited by the small number of debriefers included in each study and these reports were thus analogous to case reports. Generally, performance improved after debriefing by a skilled facilitator. However, the debriefer provided no specific advantage over other post-experience educational interventions. Acknowledging their limitations, these studies found that performance improved after self-led debrief, no debrief (with experienced practitioners), standardised multimedia debrief or after reviewing a DVD of the participants' own eye-tracking. There was no added performance improvement when review of a video recording was added to facilitator-led debriefing. One study reported no performance improvement after debriefing. Without empirical evidence that is specific to the healthcare domain, theories of learning from education and psychology should continue to inform practices and teaching for effective debriefing.

  15. Low-level liquid radioactive waste treatment at Murmansk, Russia: Technical design and review of facility upgrade and expansion

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, R.S.; Diamante, J.M. [Environmental Protection Agency, Washington, DC (United States). Office of International Activities; Duffey, R.B. [Brookhaven National Lab., Upton, NY (United States)] [and others

    1996-07-01

    The governments of Norway and the US have committed their mutual cooperation and support the Murmansk Shipping Company (MSCo) to expand and upgrade the Low-Level Liquid Radioactive Waste (LLRW) treatment system located at the facilities of the Russian company RTP Atomflot, in Murmansk, Russia. RTP Atomflot provides support services to the Russian icebreaker fleet operated by the MSCo. The objective is to enable Russia to permanently cease disposing of this waste in Arctic waters. The proposed modifications will increase the facility`s capacity from 1,200 m{sup 3} per year to 5,000 m{sup 3} per year, will permit the facility to process high-salt wastes from the Russian Navy`s Northern fleet, and will improve the stabilization and interim storage of the processed wastes. The three countries set up a cooperative review of the evolving design information, conducted by a joint US and Norwegian technical team from April through December, 1995. To ensure that US and Norwegian funds produce a final facility which will meet the objectives, this report documents the design as described by Atomflot and the Russian business organization, ASPECT, both in design documents and orally. During the detailed review process, many questions were generated, and many design details developed which are outlined here. The design is based on the adsorption of radionuclides on selected inorganic resins, and desalination and concentration using electromembranes. The US/Norwegian technical team reviewed the available information and recommended that the construction commence; they also recommended that a monitoring program for facility performance be instituted.

  16. External Tank Liquid Hydrogen (LH2) Prepress Regression Analysis Independent Review Technical Consultation Report

    Science.gov (United States)

    Parsons, Vickie s.

    2009-01-01

    The request to conduct an independent review of regression models, developed for determining the expected Launch Commit Criteria (LCC) External Tank (ET)-04 cycle count for the Space Shuttle ET tanking process, was submitted to the NASA Engineering and Safety Center NESC on September 20, 2005. The NESC team performed an independent review of regression models documented in Prepress Regression Analysis, Tom Clark and Angela Krenn, 10/27/05. This consultation consisted of a peer review by statistical experts of the proposed regression models provided in the Prepress Regression Analysis. This document is the consultation's final report.

  17. Electronic Scholarly Journals: A Review of Technical Issues in Digital Environment

    Directory of Open Access Journals (Sweden)

    Golnessa Galyani Moghaddam

    2006-12-01

    Full Text Available Scholarly journals are known as the most important medium for scholarly communication since long time back. As technology transforms the flow of information and idea everywhere, it changes the nature of scholarly communications and publishing of scholarly journals as well. The electronic scholarly publishing rapidly produced an expectation, among researchers of the availability of articles at their desktop, rather than the previous scenario of visiting the library to read a print journal issue. There are lots of technological improvements in electronic journals publishing. The present paper looks at some of technical issues in electronic publishing such as DOI, DOI-X, CrossRef, Citation/Reference Linking, OpenURL, SFX and MetaLib which are being used in the World Wide Web.

  18. SCFA lead lab technical assistance at Lawrence Berkeley National Laboratory: Baseline review of three groundwater plumes

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry; et al.

    2002-09-26

    During the closeout session, members of the technical assistance team conveyed to the site how impressed they were at the thoroughness of the site's investigation and attempts at remediation. Team members were uniformly pleased at the skilled detection work to identify sources, make quick remediation decisions, and change course when a strategy did not work well. The technical assistance team also noted that, to their knowledge, this is the only DOE site at which a world-class scientist has had primary responsibility for the environmental restoration activities. This has undoubtedly contributed to the successes observed and DOE should take careful note. The following overall recommendations were agreed upon: (1) The site has done a phenomenal job of characterization and identifying and removing source terms. (2) Technologies selected to date are appropriate and high impact, e.g. collection trenches are an effective remedial strategy for this complicated geology. The site should continue using technology that is adapted to the site's unique geology, such as the collection trenches. (3) The site should develop a better way to determine the basis of cleanup for all sites. (4) The sentinel well system should be evaluated and modified, if needed, to assure that the sentinel wells provide coverage to the current site boundary. Potential modifications could include installation, abandonment or relocation of wells based on the large amount of data collected since the original sentinel well system was designed. (5) Modeling to assist in remedial design and communication should continue. (6) The site should develop a plan to ensure institutional memory. (7) The most likely possibility for improving closure to 2006 is by removing the residual source of the Old Town plume and establishing the efficacy of remediation for the 51/64 plume.

  19. A Technical Review of MULV-Disp, a Recent Mosquito Ultra-Low Volume Pesticide Spray Dispersion Model.

    Science.gov (United States)

    Teske, Milton E; Thistle, Harold W; Bonds, Jane A S

    2015-09-01

    The authors of a recently published paper summarized the development of a regression model for ground-based ultra-low volume applications, suggesting that their model was sufficiently verified that it could be used extensively for mosquito control. These authors claimed that their statistical model was superior in its predictive capability to the extensively developed and Environmental Protection Agency-validated AGDISP mechanistic model. In this technical review, the assumptions, reduction and interpretation of data, and conclusions reached with regard to their model are discussed, and explicit misstatements and incorrect mathematical relationships are pointed out. Two published versions of the model regression equation give substantially different results without explanation. Petri dish collection was used for very small droplets, with no mention of collection efficiency. Meteorological data were misused based on manufacturer's specification of instrument accuracy. We strongly disagree with many of the model results and show that the model misrepresents the actual behavior of aerosol sprays applied in the manner tested.

  20. Review of English Language Library and Information Science Weblogs: Analyzing the Link between Weblog Types and Their Technical /Content Structure

    Directory of Open Access Journals (Sweden)

    Tahereh Karami

    2010-09-01

    Full Text Available Weblog has become well established as one of the Web 2.0 products. Given the essential nature of their job, librarians and information professionals, can use weblog as a quick and easy mean for information and knowledge sharing. The present study reviews some 150 LIS weblogs in order to examine and analyze the link between weblog types (personal, library-owned or group operated with their content and technical structure. Webometric methods were deployed for selection of the sample. The findings indicated that there is a significant correlation between the weblog types and their update frequency. The same holds between the weblog types and their content. But no such significance was observed with respect to the weblog publishing tools. The investigators believe that the links uncovered could also hold true for Iranian LIS weblogs.

  1. Review of biomedical aspects of CB masks and their relationship to military performance. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Muza, S.R.

    1986-11-01

    This review describes the most important factors affecting military work performance while wearing a CB mask: (1) the additional inspiratory and expiratory breathing resistance; (2) increased external dead space; (3) thermal stress of the mask and hood; (4) restriction of functional vision; (5) hindrance of speech transmission and reception; (6) weight, size, and pressure on the face by the CB mask; (7) claustrophobic reactions, and (8) sleep loss and lack of nutrient intake due to long-term wear. In assessing the biomedical aspects of these factors, rather than making comparisons between specific models of CB masks, the review addresses these factors as they apply to CB masks in general.

  2. Review of technical program and progress. LBL geothermal exploration technology development program, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, N.E.

    1982-01-01

    The objectives, method of approach, main program elements, and progress through FY 1982 for Geothermal Exploration Technology Program at LBL are reviewed. Current tasks include controlled-source electromagnetic research, seismological research, magnetotelluric research, and electromagnetic technique evaluation and numerical modeling.

  3. Development status of planar SOFCs at Sanyo

    Energy Technology Data Exchange (ETDEWEB)

    Miyake, Yasuo; Akiyama, Yukinori; Yasuo, Takashi [SANYO Electric Co., Ltd., Osaka (Japan)] [and others

    1996-12-31

    A 2 kW class combined cell stacked module (182 cm{sup 2} X 4X 17) was examined. An output power of 2.47 kW and output power density of 0.20 W/cm{sup 2} were obtained at the current density of 0.3 A/cm{sup 2}. The temperature uniformity is an important factor to develop large scale SOFC modules. Therefore, in this 2 kW class module, one cell was divided into four smaller unit cells to decrease temperature difference across these cells. Moreover, an internal heat-exchanging duct was arranged to spend the surplus heat effectively in the middle of the module. As for the basic research, the followings were investigated to improve thermal cycle characteristics. One was to adopt a silica/alumina-based sealing, material in order to absorb the thermal expansion difference between the electrolyte and the separator. Deterioration was quite small after 12 thermal cycles with a 150 by 150 mm single cell. The other was to use a heat-resisting ferritic alloy as a separator in a 50 by 50 mm single cell in order to decrease the thermal expansion coefficient of the separator. High performance was obtained for 2000 hours at 900{degrees}C in an endurance test and deterioration was quite small after a thermal cycle.

  4. AN UPDATED REVIEW ON TECHNICAL ADVANCES TO ENHANCE DISSOLUTION RATE OF HYDROPHOBIC DRUGS

    Directory of Open Access Journals (Sweden)

    Anjan K. Mahapatra

    2012-10-01

    Full Text Available The dissolution behavior of drugs continues to be one of the challenging aspects in formulation development. The advent of combinatorial chemistry and high throughput screening increased the number of hydrophobic compounds significantly. The Biopharmaceutical classification scheme (BCS takes into account three major factors: solubility, intestinal permeability, and dissolution rate and all the three govern the rate and extent of oral absorption and hence bioavailability. Especially for BCS Class II substances the bioavailability of a poorly soluble drug may be enhanced by increasing the solubility and dissolution rate of it in the gastro-intestinal fluids. Drug substances whose highest dose is soluble in less than 250 ml of water over a range of pH from 1.0 to 7.5 are considered as highly soluble. In contrast, the drug compounds with solubility below 1mg mL-1 face significant dissolution or bioavailability problems. With the introduction of advanced technologies it could be possible to overcome the problems. The article provides an overview on the theoretical definitions and technical approaches broadly covering technologies and hydrophilic carriers or excipients used. Further part of the manuscript is committed to the formulation, analytical methods for the characterization of samples, dissolution or release kinetics and model fittings.

  5. Role of the Technical Aspects of Hypofractionated Radiation Therapy Treatment of Prostate Cancer: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Clemente, Stefania, E-mail: clemente_stefania@libero.it [Istituto di Ricovero e Cura a Carattere Scientifico Centro di Riferimento Oncologico della Basilicata Rionero in Vulture, Potenza (Italy); Nigro, Roberta [Azienda Sanitaria Locale Rieti, Roma (Italy); Oliviero, Caterina [Istituto di Ricovero e Cura a Carattere Scientifico Centro di Riferimento Oncologico della Basilicata Rionero in Vulture, Potenza (Italy); Marchioni, Chiara [Azienda Sanitaria Locale Rieti, Roma (Italy); Esposito, Marco [Azienda Sanitaria, Firenze (Italy); Giglioli, Francesca Romana [Azienda Ospedaliera Città della Salute e della Scienza di Torino, Torino (Italy); Mancosu, Pietro [Humanitas Clinical and Research Hospital, Rozzano, Milano (Italy); Marino, Carmelo [Humanitas Centro Catanese di Oncologia, Catania (Italy); Russo, Serenella [Azienda Sanitaria, Firenze (Italy); Stasi, Michele [Azienda Ospedaliera Ordine Mauriziano di Torino, Torino (Italy); Strigari, Lidia [Istituto Nazionale Tumori Regina Elena, Roma (Italy); Veronese, Ivan [Universita' degli Studi di Milano, Milano (Italy); Landoni, Valeria [Istituto Nazionale Tumori Regina Elena, Roma (Italy)

    2015-01-01

    The increasing use of moderate (<35 fractions) and extreme (<5 fractions) hypofractionated radiation therapy in prostate cancer is yielding favorable results, both in terms of maintained biochemical response and toxicity. Several hypofractionation (HF) schemes for the treatment of prostate cancer are available, although there is considerable variability in the techniques used to manage intra-/interfraction motion and deliver radiation doses. We performed a review of the published studies on HF regimens as a topic of interest for the Stereotactic Ablative Radiotherapy working group, which is part of the Italian Association of Medical Physics. Aspects of organ motion management (imaging for contouring, target volume definition, and rectum/bladder preparation) and treatment delivery (prostate localization, image guided radiation therapy strategy and frequency) were evaluated and categorized to assess outcome relative to disease control and toxicity. Despite the heterogeneity of the data, some interesting trends that emerged from the review might be useful in identifying an optimum HF strategy.

  6. Technical aspects of production and analysis of biodiesel from used cooking oil. A review

    Energy Technology Data Exchange (ETDEWEB)

    Enweremadu, C.C.; Mbarawa, M.M. [Department of Mechanical Engineering, Tshwane University of Technology, Private Bag X680, Pretoria 001 (South Africa)

    2009-12-15

    The increasing awareness of the depletion of fossil fuel resources and the environmental benefits of biodiesel fuel has made it more attractive in recent times. The cost of biodiesel, however, is the major hurdle to its commercialization in comparison to petroleum-based diesel fuel. The high cost is primarily due to the raw material, mostly neat vegetable oil. Used cooking oil is one of the economical sources for biodiesel production. However, the products formed during frying, can affect the transesterification reaction and the biodiesel properties. This paper attempts to review various technological methods of biodiesel production from used cooking oil. The analytical methods for high quality biodiesel fuel from used cooking oil like GC, TLC, HPLC, GPC and TGA have also been summarized in this paper. In addition, the specifications provided by different countries are presented. The fuel properties of biodiesel fuel from used cooking oil were also reviewed and compared with those of conventional diesel fuel. (author)

  7. Optimizing Diagnostic Yield for EUS-Guided Sampling of Solid Pancreatic Lesions: A Technical Review

    Science.gov (United States)

    Weston, Brian R.

    2013-01-01

    Endoscopic ultrasound-guided fine-needle aspiration (EUS-FNA) has a higher diagnostic accuracy for pancreatic cancer than other techniques. This article will review the current advances and considerations for optimizing diagnostic yield for EUS-guided sampling of solid pancreatic lesions. Preprocedural considerations include patient history, confirmation of appropriate indication, review of imaging, method of sedation, experience required by the endoscopist, and access to rapid on-site cytologic evaluation. New EUS imaging techniques that may assist with differential diagnoses include contrast-enhanced harmonic EUS, EUS elastography, and EUS spectrum analysis. FNA techniques vary, and multiple FNA needles are now commercially available; however, neither techniques nor available FNA needles have been definitively compared. The need for suction depends on the lesion, and the need for a stylet is equivocal. No definitive endosonographic finding can predict the optimal number of passes for diagnostic yield. Preparation of good smears and communication with the cytopathologist are essential to optimize yield. PMID:23935542

  8. Systematic review and meta-analysis of the role of mental training in the acquisition of technical skills in surgery.

    Science.gov (United States)

    Rao, Ahsan; Tait, Ian; Alijani, Afshin

    2015-09-01

    Mental training is rehearsal of mental imagery without physically performing the task. The aim of the study was to perform systematic review and meta-analysis on all the available data to evaluate the role of mental training in the acquisition of surgical technical skills. The following search databases were used: EMBASE, MEDLINE, Web of Science, Clinicaltrials.gov.uk, SIGN guidelines, NICE guidelines, and Cochrane review register. Meta-analysis was performed using Revman 5.2 statistical software. There were a total of 9 randomized controlled trials with 474 participants, of which 189 participants received mental training. Five randomized controlled trials concluded positive impact of mental training. Mental training group did not show any significant improvement in overall performance of the task carried in each study (P = .06). Mental training can be used as an important supplementary tool in learning surgical skills when run in parallel with physical training and applied to trainees with some experience of the skill. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Review of the Technical Metrological Regulation for flow computers and volume converters

    Science.gov (United States)

    Almeida, R. O.; Aguiar Júnior, E. A.; Costa-Felix, R. P. B.

    2016-07-01

    With the publication of Inmetro's regulation n° 373/2014, Inmetro presented the proposal to review the regulation of flow computers and volume converters, whose scope now includes fiscal measurement, ownership, custody transfer, among others, of hydrocarbons liquids and natural gas. This new proposal provides improvements to the legal metrological control of these instruments in Brazil, while also broaden the scope from the previous regulation, the Inmetro's regulation n° 64/2003. The purpose of this paper is to present these changes from a metrological point of view, and also clarify the transitional rules for the process.

  10. Usability testing: a review of some methodological and technical aspects of the method

    CERN Document Server

    Bastien, J M Christian

    2010-01-01

    The aim of this paper is to review some work conducted in the field of user testing that aims at specifying or clarifying the test procedures and at defining and developing tools to help conduct user tests. The topics that have been selected were considered relevant for evaluating applications in the field of medical and health care informatics. These topics are: the number of participants that should take part in a user test, the test procedure, remote usability evaluation, usability testing tools, and evaluating mobile applications.

  11. Psychotherapy and Counseling in the Treatment of Drug Abuse [Technical Review] (Rockville, Maryland, May 18-19, 1989). National Institute on Drug Abuse Research Monograph Series 104.

    Science.gov (United States)

    Onken, Lisa Simon; Blaine, Jack D.

    This monograph is based on the papers from a technical review. These papers are included: (1) Psychotherapy and Counseling Research in Drug Abuse Treatment: Questions, Problems, and Solutions (Lisa Onken, Jack Blaine); (2) Psychotherapy and Counseling for Methadone-Maintained Opiate Addicts: Results of Research Studies (George Woody, A. T.…

  12. 76 FR 47613 - Board Meeting: September 13-14, 2011-Salt Lake City, UT; the U.S. Nuclear Waste Technical Review...

    Science.gov (United States)

    2011-08-05

    ... ``Roadmap.'' Other issues that will be discussed at the meeting include a preliminary report by the Blue... issues related to nuclear waste management and to review the technical validity of DOE activities related... information on lodging or logistics, contact Linda Coultry. They can be reached at 2300 Clarendon Boulevard...

  13. Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

    Science.gov (United States)

    Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

    2017-02-16

    We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be

  14. Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

    Science.gov (United States)

    Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

    2017-01-01

    Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for

  15. Idaho National Engineering Laboratory (INEL) technical review of YGN 3 and 4 thermal-hydraulic relative size effects

    Energy Technology Data Exchange (ETDEWEB)

    Ward, L.W.; Fineman, C.P.; Gruen, G.E.

    1989-08-01

    Combustion Engineering, Inc., (CE) and the Korean Advanced Energy Research Institute (KAERI) are jointly designing two 2825 MW{sub t} System 80 nuclear steam supply systems for construction in Korea. The two 2825 MW{sub t} plants are similar in design to the larger System 80 class of plants but are reduced in size from 3817 MW{sub t}. These plants will be operated by the Korean Electric Power Company and have been designated as Yonggwang Nuclear Units 3 and 4. The Idaho National Engineering Laboratory (INEL) was selected by CE to perform a third party independent technical review of the thermal-hydraulic safety analyses for Yonggwang Units 3 and 4. The purpose of the review is to establish the acceptability of the safety analyses addressing the differences in size between the 2825 and 3817 MW{sub t} CE designed System 80 plants. The analysis methods used by Combustion Engineering, Inc. were also reviewed to assure that only United States Nuclear Regulatory Commission approved methods were used for the Yonggwang Units 3 and 4 safety analyses and that the methods were applied in a manner consistent with that for the Palo Verde System 80 plants, currently in operation in the US. In general, it was found that the differences between 3817 and 2825 MW{sub t} units led to increased margins except for the large break LOCA (LBLOCA) and boron dilution transient. For the LBLOCA, use of improved models enhanced performance which allowed an increase in peak linear heat generation rate relative to that for the 3817 MW{sub t} plant. For the boron dilution event, an increase in the shutdown margin was necessary to assure the same time to criticality as that for the 3817 MW{sub t} plant. 39 refs., 9 figs., 4 tabs.

  16. American Gastroenterological Association Institute Technical Review on the Role of Therapeutic Drug Monitoring in the Management of Inflammatory Bowel Diseases.

    Science.gov (United States)

    Vande Casteele, Niels; Herfarth, Hans; Katz, Jeffry; Falck-Ytter, Yngve; Singh, Siddharth

    2017-09-01

    Therapeutic drug monitoring (TDM), which involves measurement of drug or active metabolite levels and anti-drug antibodies, is a promising strategy that can be used to optimize inflammatory bowel disease therapeutics. It is based on the premise that there is a relationship between drug exposure and outcomes, and that considerable inter-individual variability exists in how patients metabolize the drug (pharmacokinetics) and the magnitude and duration of response to therapy (pharmacodynamics). Therefore, the American Gastroenterological Association has prioritized clinical guidelines on the role of TDM in the management of inflammatory bowel disease. To inform these clinical guidelines, this technical review was developed in accordance with the GRADE (Grading of Recommendations Assessment, Development, and Evaluation) framework for interventional and prognostic studies, and focused on the application of TDM for biologic therapy, specifically anti-tumor necrosis factor-α agents, and for thiopurines. Focused questions address the benefits and risks of a strategy of reactive TDM (in patients with active inflammatory bowel disease) to guide treatment changes compared with empiric treatment changes, and the benefits and risks of a strategy of routine proactive TDM (during routine clinical care in patients with quiescent disease) compared with no routine TDM. Additionally, the review addresses the benefits and risks of routine measurement of thiopurine methyltransferase enzyme activity or genotype before starting thiopurine therapy compared with empiric weight-based dosing and explores the performance of different trough drug concentrations for anti-tumor necrosis factor agents and thiopurines to inform clinical decision making when applying TDM in a reactive setting. Due to a paucity of data, this review does not address the role of TDM for more recently approved biologic agents, such as vedolizumab or ustekinumab. Copyright © 2017 AGA Institute. Published by Elsevier

  17. A Review of Microinvasive Combined Phaco-Vitrectomy: Recent Technical Advances.

    Science.gov (United States)

    Mercanti, Andrea; Renna, Antonio

    2017-06-01

    Combined cataract and vitreoretinal surgery results in better compliance in patients with posterior segment pathology and should be the preferred approach to reduce the high rate of cataract development after vitreoretinal surgery and to improve earlier visual acuity. Technological advances in both anterior and posterior segment surgery are leading to the development of instruments with a smaller diameter and more efficient tools, resulting in a minimizing of the tissue trauma related to the surgery, acceleration of functional recovery and increasing patient comfort. In this review we report on recent advances that allow this miniaturization process while maintaining the efficacy and safety of microinvasive combined surgical procedures, with a focus on pumps, illumination, phaco tip and the vitrectomy probe.

  18. Computer Aided-Diagnosis of Prostate Cancer on Multiparametric MRI: A Technical Review of Current Research

    Directory of Open Access Journals (Sweden)

    Shijun Wang

    2014-01-01

    Full Text Available Prostate cancer (PCa is the most commonly diagnosed cancer among men in the United States. In this paper, we survey computer aided-diagnosis (CADx systems that use multiparametric magnetic resonance imaging (MP-MRI for detection and diagnosis of prostate cancer. We review and list mainstream techniques that are commonly utilized in image segmentation, registration, feature extraction, and classification. The performances of 15 state-of-the-art prostate CADx systems are compared through the area under their receiver operating characteristic curves (AUC. Challenges and potential directions to further the research of prostate CADx are discussed in this paper. Further improvements should be investigated to make prostate CADx systems useful in clinical practice.

  19. Computer aided-diagnosis of prostate cancer on multiparametric MRI: a technical review of current research.

    Science.gov (United States)

    Wang, Shijun; Burtt, Karen; Turkbey, Baris; Choyke, Peter; Summers, Ronald M

    2014-01-01

    Prostate cancer (PCa) is the most commonly diagnosed cancer among men in the United States. In this paper, we survey computer aided-diagnosis (CADx) systems that use multiparametric magnetic resonance imaging (MP-MRI) for detection and diagnosis of prostate cancer. We review and list mainstream techniques that are commonly utilized in image segmentation, registration, feature extraction, and classification. The performances of 15 state-of-the-art prostate CADx systems are compared through the area under their receiver operating characteristic curves (AUC). Challenges and potential directions to further the research of prostate CADx are discussed in this paper. Further improvements should be investigated to make prostate CADx systems useful in clinical practice.

  20. Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

    Science.gov (United States)

    2008-01-01

    This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

  1. Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

    Science.gov (United States)

    2008-01-01

    This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

  2. Technical standardization of oil well abandonment: a review of current standards and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Suzart, J. Walter P.; Pessoa, Laudemar; Paiva, Maria [Halliburton Energy Services (HES), Duncan, OK (United States)

    2008-07-01

    The objective of this study is to provide a new methodology for well abandonment. This practice is becoming more and more important because of the increasing number of production fields being abandoned. We strongly recommend a study of cement slurries properties for specific use in temporary and permanent abandonment plugs based on the estimation of the cement slurry hardened when placed in the well. By using specific additives, it is possible to achieve very stable slurries. For example, when permeability is reduced, formation fluid migration can be blocked and chemical reactions between the fluid and the slurry may be inhibited. With this objective, we present a laboratory investigation model and an example of slurry testing recommendation. During the abandonment operation, all records of the well characteristics should be maintained to include the reason for the abandonment, and location of fresh water, brine, and hydrocarbon zones that may exist. This documentation will also allow the analysis of solutions for the problems that originally caused the abandonment of the well. This data could be important for future use by environmental protection commissions to reopen or to drill an adjacent well. Given the high price of oil, it may now be economically feasible to reopen the well, if the reason for abandonment was low productivity. This way, a critical analysis of the current conditions of well and field abandonment in the country is presented. Based on this information, a review of the current standards is suggested. (author)

  3. Pet/Mr Tomographs: A Review With Technical, Radiochemical And Clinical Perspectives.

    Science.gov (United States)

    Giovacchini, Giampiero; Giovannini, Elisabetta; Riondato, Mattia; Ciarmiello, Andrea

    2017-08-16

    In the last decade, an increasing number of positron emission tomography / magnetic resonance (PET/MR) tomographs have been installed and many clinical studies were performed in the neurological field. Although PET/MR has many favorable properties to support the application in brain imaging, attenuation correction, and therefore accurate quantification, is a problem that still requires optimal solution. In this review we have summarized the three main methods that are currently used to correct for attenuation in PET/MR, namely atlas- or template-based methods, segmentation-based methods, and reconstruction-based methods. There is currently active ongoing research to refine available methods and improvements are reasonably expected in the next years. Clinical studies using PET/MR focused mainly on neurodegenerative disorders and neurooncological. PET/MR hybrids tomographs provided promising scientific results and were logistically more convenient for patients. Additionally, in order to explore all potential clinical benefits of this hybrid technology, the design and development of multimodal contrast agent has been constantly increased the attention of radiochemists. Many PET/MR dual probes have been already realized, particularly in the nanotechnology field, sometimes preceding the identification of a clear diagnostic application in medicine. In the near future, we predict more clinical studies as the availability of PET/MR will further increase and new tracers for neurodegenerative disorders will accept broader clinical acceptance. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  4. Clathrate Sequestration: State-of-the-Art Review and New Technical Approaches

    Directory of Open Access Journals (Sweden)

    Annick Nago

    2011-01-01

    Full Text Available This paper focuses on reviewing the currently available solutions for natural gas production from methane hydrate deposits using CO2 sequestration. Methane hydrates are ice-like materials, which form at low temperature and high pressure and are located in permafrost areas and oceanic environments. They represent a huge hydrocarbon resource, which could supply the entire world for centuries. Fossil-fuel-based energy is still a major source of carbon dioxide emissions which contribute greatly to the issue of global warming and climate change. Geological sequestration of carbon dioxide appears as the safest and most stable way to reduce such emissions for it involves the trapping of CO2 into hydrocarbon reservoirs and aquifers. Indeed, CO2 can also be sequestered as hydrates while helping dissociate the in situ methane hydrates. The studies presented here investigate the molecular exchange between CO2 and CH4 that occurs when methane hydrates are exposed to CO2, thus generating the release of natural gas and the trapping of carbon dioxide as gas clathrate. These projects include laboratory studies on the synthesis, thermodynamics, phase equilibrium, kinetics, cage occupancy, and the methane recovery potential of the mixed CO2–CH4 hydrate. An experimental and numerical evaluation of the effect of porous media on the gas exchange is described. Finally, a few field studies on the potential of this new gas hydrate recovery technique are presented.

  5. Measuring electrophysiological connectivity by power envelope correlation: a technical review on MEG methods

    Science.gov (United States)

    O'Neill, George C.; Barratt, Eleanor L.; Hunt, Benjamin A. E.; Tewarie, Prejaas K.; Brookes, Matthew J.

    2015-11-01

    The human brain can be divided into multiple areas, each responsible for different aspects of behaviour. Healthy brain function relies upon efficient connectivity between these areas and, in recent years, neuroimaging has been revolutionised by an ability to estimate this connectivity. In this paper we discuss measurement of network connectivity using magnetoencephalography (MEG), a technique capable of imaging electrophysiological brain activity with good (~5 mm) spatial resolution and excellent (~1 ms) temporal resolution. The rich information content of MEG facilitates many disparate measures of connectivity between spatially separate regions and in this paper we discuss a single metric known as power envelope correlation. We review in detail the methodology required to measure power envelope correlation including (i) projection of MEG data into source space, (ii) removing confounds introduced by the MEG inverse problem and (iii) estimation of connectivity itself. In this way, we aim to provide researchers with a description of the key steps required to assess envelope based functional networks, which are thought to represent an intrinsic mode of coupling in the human brain. We highlight the principal findings of the techniques discussed, and furthermore, we show evidence that this method can probe how the brain forms and dissolves multiple transient networks on a rapid timescale in order to support current processing demand. Overall, power envelope correlation offers a unique and verifiable means to gain novel insights into network coordination and is proving to be of significant value in elucidating the neural dynamics of the human connectome in health and disease.

  6. Scientometric analysis: A technical need for medical science researchers either as authors or as peer reviewers.

    Science.gov (United States)

    Masic, Izet

    2016-01-01

    The nature of performing a scientific research is a process that has several different components which consist of identifying the key research question(s), choices of scientific approach for the study and data collection, data analysis, and finally reporting on results. Generally, peer review is a series of procedures in the evaluation of a creative work or performance by other people, who work in the same or related field, with the aim of maintaining and improving the quality of work or performance in that field. The assessment of the achievement of every scientist, and thus indirectly determining his reputation in the scientific community of these publications, especially journals, is done through the so-called impact factor index. The impact factor predicts or estimates that how many annual citations article may receive after its publication. Evaluation of scientific productivity and assessment of the published articles of researchers and scientists can be made through the so-called H-index. The quality of published results of scientific work largely depends on knowledge sources that are used in the preparation, which means that it should be considered to serve the purpose and the very relevance of the information used. Scientometrics as a field of science covers all aforementioned issues, and scientometric analysis is obligatory for quality assessment of the scientific validity of published articles and other type of publications.

  7. Review of available scientific and technical evidence regarding liquid-based cytology

    Directory of Open Access Journals (Sweden)

    Alberto Frutos Pérez-Surio

    2017-06-01

    Full Text Available Introduction. Cervical cancer can be prevented by early diagnosis and treatment of patients with abnormal results, thus decreasing their incidence and mortality. In contrast to conventional techniques (Papanicolau, diagnostic techniques have been developed based on the preservation of the sample in a stabilizing solution (liquid-based cytology. The different methods of liquid-based cytology used in the screening of cervical cancer against the Papanicolau technique are evaluated. Material and methods. A systematic review of the literature has been performed (2010-2015. The search was developed by including MeSH terms as cervical intraepithelial neoplasia and papilloma virus infection in the MedLine, Embase, Cochrane Library, CRD, LILACS and IBECS databases. Inclusion criteria were adult women screened for cervical cancer using liquid-based cytology techniques, compared with conventional methods. Results. 464 references were found related to the reliability-precision of the test, of which 13 were included in the report. A health technology assessment report was conducted in 2013 by the Agency for Health Technology Assessment of Andalusia (AETSA. The quality of the studies was moderate and moderate-low. AETSA found studies that included more than 700,000 women between 14 and 90 years old, who were screened by liquid-based cytology, compared to the conventional one. Studies have shown that liquid-based cytology techniques reduce the percentage of unsatisfactory samples compared to conventional ones. The analysis of detection of cellular abnormalities and diagnostic validity indexes showed significant differences when comparing both methods. Conclusions. The studies analyzed presented methodological limitations. Hence, the results should be interpreted with caution. Liquid-based cytology did not present greater diagnostic capacity than conventional methods, but it reduced, with statistically significant results, the number of samples unsatisfactory

  8. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Passiakos, M.

    1982-06-01

    This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

  9. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1978-04-11

    This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index.

  10. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1976-04-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication.

  11. PROPOSAL FOR REVIEW OF RESTRICTIONS AND LOGISTIC OPPORTUNITIES IN AN EAST AFRICAN PORT: FROM A TECHNICAL MISSION

    Directory of Open Access Journals (Sweden)

    Robson Quinello

    2010-07-01

    Full Text Available The logistics went over the century, as noted by Gonçalves (2007, from  a fragmented and diluted within and value of organizations profile to a critical role in the strategy of the networks and chains of international business. For the twenty-first century, as will be seen in this article, logistics goes beyond these functions going to represent a social and political role in international relations between countries. The installation of a port located in East Africa near the Red Sea, the critical incident will be reviewed during a technical mission undertaken by a researcher in 2009. This research field, in the form of checklist, appoint the main barriers in infrastructure, information, rules and norms. The results indicate critical constraints of infrastructure and institutional opportunities that impact the implementation of new developments there. We will show that the progressive development of organizational arrangement to a complex undertaking, such as ports, can be key role in reversing the condition of misery and poverty in African countries.

  12. Applying Human-performance Models to Designing and Evaluating Nuclear Power Plants: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.

    2009-11-30

    Human performance models (HPMs) are simulations of human behavior with which we can predict human performance. Designers use them to support their human factors engineering (HFE) programs for a wide range of complex systems, including commercial nuclear power plants. Applicants to U.S. Nuclear Regulatory Commission (NRC) can use HPMs for design certifications, operating licenses, and license amendments. In the context of nuclear-plant safety, it is important to assure that HPMs are verified and validated, and their usage is consistent with their intended purpose. Using HPMs improperly may generate misleading or incorrect information, entailing safety concerns. The objective of this research was to develop guidance to support the NRC staff's reviews of an applicant's use of HPMs in an HFE program. The guidance is divided into three topical areas: (1) HPM Verification, (2) HPM Validation, and (3) User Interface Verification. Following this guidance will help ensure the benefits of HPMs are achieved in a technically sound, defensible manner. During the course of developing this guidance, I identified several issues that could not be addressed; they also are discussed.

  13. Accomplishments of Aquarius: NASA's first global Sea Surface Salinity Mission: a review of the technical findings to date

    Science.gov (United States)

    Sen, Amit

    2014-10-01

    Launched 10 June 2011, the NASA's Aquarius instrument onboard the Argentine built and managed Satélite de Aplicaciones Científicas (SAC-D) has been tirelessly observing the open oceans, confirming and adding new knowledge to the not so vast measured records of our Earth's global oceans. This paper reviews the data collected over the last 3 years, it's findings, challenges and future work that is at hand for the sleepless oceanographers, hydrologists and climate scientists. Although routine data is being collected, a snapshot is presented from almost 3-years of flawless operations showing new discoveries and possibilities of lot more in the future. Repetitive calibration and validation of measurements from Aquarius continue together with comparison of the data to the existing array of Argo temperature/salinity profiling floats, measurements from the recent Salinity Processes in the Upper Ocean Regional Study (SPURS) in-situ experiment and research, and to the data collected from the European Soil Moisture Ocean Salinity (SMOS) mission. This all aids in the optimization of computer model functions to improve the basic understanding of the water cycle over the oceans and its ties to climate. The Aquarius mission operations team also has been tweaking and optimizing algorithms, reprocessing data as needed, and producing salinity movies that has never been seen before. A brief overview of the accomplishments, technical findings to date will be covered in this paper.

  14. INDEPENDENT TECHNICAL REVIEW OF THE BUILDING 100 PLUME, FORMER DOE PINELLAS SITE (YOUNG - RAINEY STAR CENTER), LARGO, FLORIDA

    Energy Technology Data Exchange (ETDEWEB)

    Eddy-Dilek, C.; Rossabi, J.; Amidon, M.; Riha, B.; Kaback, D.

    2010-07-30

    Contaminated groundwater associated with Building 100 at the Young-Rainey Science, Technology, and Research Center, formerly the DOE Pinellas plant, is the primary remedial challenge that remains to be addressed at the site. Currently, Building 100 is an active industrial facility that is now owned and operated by the Pinellas county government. Groundwater samples collected from monitoring wells recently installed near the southern boundary of the site suggest that contaminated groundwater has migrated off the plant site. In response to the challenges presented by the Building 100 plume, the Office of Legacy Management (LM) requested assistance from the DOE Office of Groundwater and Soil Remediation (EM-32) to provide a review team to make technical recommendations so that they can efficiently and effectively address characterization and remediation of the plume. The review team was unanimous in the conclusion that a dynamic strategy that combines a phased implementation of direct push samplers, sensors, and tools can be used to better delineate the extent of contamination, control plume migration, and rapidly remediate the contaminated groundwater at the site. The initial efforts of the team focused on reviewing the site history and data, organizing the information into a conceptual model, identifying appropriate technologies, and recommending an integrated strategy. The current groundwater data from the site indicate a two-lobed plume extending to the east and south. To the east vinyl chloride is the primary contaminant of concern, to the south, vinyl chloride and cis1, 2-DCE are the primary contaminants. The limited data that are available suggest that reductive dechlorination of the TCE is already occurring but is not sufficient to prevent offsite migration of low concentrations of TCE daughter products. The team recommends that DOE pursue a strategy that builds on the natural cleansing capacity of the subsurface with reductive methods including biostimulation

  15. Technical Review Report for the Safety Analysis Report for Packaging Model 9977 S-SARP-G-00001 Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    DiSabatino, A; Hafner, R; West, M

    2007-10-04

    This Technical Review Report (TRR) summarizes the review findings for the Safety Analysis Report for Packaging (SARP) for the Model 9977 B(M)F-96 shipping container. The content analyzed for this submittal is Content Envelope C.1, Heat Sources, in assemblies of Radioisotope Thermoelectric Generators or food-pack cans. The SARP under review, i.e., S-SARP-G-00001, Revision 2 (August 2007), was originally referred to as the General Purpose Fissile Material Package. The review presented in this TRR was performed using the methods outlined in Revision 3 of the Department of Energy's (DOE's) Packaging Review Guide (PRG) for Reviewing Safety Analysis Reports for Packages. The format of the SARP follows that specified in Revision 2 of the Nuclear Regulatory Commission's, Regulatory Guide 7.9, i.e., Standard Format and Content of Part 71 Applications for Approval of Packages for Radioactive Material. Although the two documents are similar in their content, they are not identical. Formatting differences have been noted in this TRR, where appropriate. The Model 9977 Package is a 35-gallon drum package design that has evolved from a family of packages designed by DOE contractors at the Savannah River Site. The Model 9977 Package design includes a single, 6-inch diameter, stainless steel pressure vessel containment system (i.e., the 6CV) that was designed and fabricated in accordance with Section III, Subsection NB, of the American Society of Mechanical Engineers Boiler & Pressure Vessel Code. The earlier package designs, i.e., the Model 9965, 9966, 9967 and 9968 Packages, were originally designed and certified in the 1980s. In the 1990s, updated package designs that incorporated design features consistent with new safety requirements, based on International Atomic Energy Agency guidelines, were proposed. The updated package designs were the Model 9972, 9973, 9974 and 9975 Packages, respectively. The Model 9975 Package was certified by the Packaging Certification

  16. Treatment of De Garengeot’s hernia using De Oliveira’s technic: A case report and review of literature

    Directory of Open Access Journals (Sweden)

    Heros Souza Couto Jr.

    2016-01-01

    Conclusion: This paper presents a case of a 84yo female with De Garengeot’s hernia that was submitted to a correction using the De Oliveira’s technic. A low cost technic with great results without use of polypropylene mesh.

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  18. EE Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    1985-06-01

    Areas of research reported include: ultrafast gating of microchannel plate x-ray spectrometers, study of power MOS fast switching techniques, lightning vulnerability of nuclear explosive test systems at the Nevada Test Site, and a computer model of the MFTF-B neutral beam accel dc power supply.

  19. EE Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    1985-12-01

    Brief summaries are given of electronics engineering work, including: laser engineering, engineering research, nuclear energy systems, engineering services, and field test systems. Individual papers are abstracted separately. (LEW)

  20. Reviews on the Japanese Patent Applications Regarding Nickel/Metal Hydride Batteries

    Directory of Open Access Journals (Sweden)

    Taihei Ouchi

    2016-06-01

    Full Text Available The Japanese Patent Applications filed on the topic of nickel/metal hydride (Ni/MH batteries have been reviewed. Patent applications filed by the top nine battery manufacturers (Matsushita, Sanyo, Hitachi Maxell, Yuasa, Toshiba, FDK, Furukawa, Japan Storage, and Shin-kobe, five component suppliers (Tanaka, Mitsui, Santoku, Japan Metals & Chemicals Co. (JMC, and Shin-Etsu, and three research institutes (Industrial Research Institute (ISI, Agency of Industrial Science and Technology (AIST, and Toyota R & D were chosen as the main subjects for this review, based on their production volume and contribution to the field. By reviewing these patent applications, we can have a clear picture of the technology development in the Japanese battery industry. These patent applications also provide insights, know-how, and future directions for engineers and scientists working in the rechargeable battery field.

  1. Improvements in State and Local Planning for Mass Dispensing of Medical Countermeasures: The Technical Assistance Review Program, United States, 2007-2014.

    Science.gov (United States)

    Renard, Paul G; Vagi, Sara J; Reinold, Chris M; Silverman, Brenda L; Avchen, Rachel N

    2017-09-01

    To evaluate and describe outcomes of state and local medical countermeasure preparedness planning, which is critical to ensure rapid distribution and dispensing of a broad spectrum of life-saving medical assets during a public health emergency. We used 2007 to 2014 state and local data collected from the Centers for Disease Control and Prevention's Technical Assistance Review. We calculated descriptive statistics from 50 states and 72 local Cities Readiness Initiative jurisdictions that participated in the Technical Assistance Review annually. From 2007 to 2014, the average overall Technical Assistance Review score increased by 13% for states and 41% for Cities Readiness Initiative jurisdictions. In 2014, nearly half of states achieved the maximum possible overall score (100), and 94% of local Cities Readiness Initiative jurisdictions achieved a score of 90 or more. Despite challenges, effective and timely medical countermeasure distribution and dispensing is possible with appropriate planning, staff, and resources. However, vigilance in training, exercising, and improving plans from lessons learned in a sustained, coordinated way is critical to ensure continued public health preparedness success.

  2. SAM Technical Review Committee Final Report: Summary and Key Recommendations from the Onsite TRC Meeting Held April 22-23, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N.; Dobos, S.; Janzou, S.; Gilman, P.; Freeman, J.; Kaffine, L.

    2013-08-01

    The System Advisor Model (SAM) is a broad and robust set of models and frameworks for analyzing both system performance and system financing. It does this across a range of technologies dominated by solar technologies including photovoltaics (PV) and concentrated solar power (CSP). The U.S. Department of Energy (DOE) Solar Energy Technology Program requested the SAM development team to review the photovoltaic performance modeling with the development community and specifically, with the independent engineering community. The report summarizes the major effort for this technical review committee (TRC).

  3. Summary of the technical review of the safety analysis reports for packaging (SARP) for the transnuclear transport/storage casks: TN-BRP and TN-REG

    Energy Technology Data Exchange (ETDEWEB)

    1986-07-01

    The Safety Analysis Reports for Packaging for two spent fuel shipping casks were technically reviewed by the Oak Ridge National Laboratory. The casks were designed by Transnuclear, Inc., for shipment of 85 Big Rock Point boiling water reactor fuel elements and 40 R.E. Ginna pressurized water reactor fuel elements from West Valley, New York, to Idaho Falls, Idaho. The intent of the review was to ensure compliance of the casks with the requirements the applicable Federal Regulations contained in 10 CFR Pt. 71 and allow issuance of Department of Energy Certificates of Compliance for transport by the Department of Energy Idaho Operations Office. The review was performed by a team of Oak Ridge National Laboratory staff assembled for their expertise in criticality analysis, shielding, metallurgy, nondestructive testing, thermal analysis, structural analysis, and containment. This report describes the review processes, the findings in each technical area, and the overall conclusion that a Certificate of Compliance could be issued for the proposed single shipment under the specified conditions and constraints.

  4. Review of the Technical Status on the Liquidus and the Solidus temperature of the Metallic Fuel for Liquid Metal Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Cho, C. H.; Lee, B. O.; Jeong, H. Y.; Lee, Y. B

    2007-09-15

    There are some phenomenological uncertainties for partial or whole core melting of Sodium-cooled fast reactor with the metal fuel. Especially, the major phenomenology to be experimentally resolved is the potential for freezing and plugging of molten metallic fuel in above-core and below-core structures and possibly in inter-subassembly spaces. For suspect to these phenomenological uncertainties, we are required to understand characteristic behavior of molten fuel. Also, proof of the capacity of the debris bed cooling that is one of the technical issue for safety of Gen IV SFR is an essential condition to solve the problem of in-vessel retention of the core debris. For these sequences, experimental data for liquidus/solidus temperature and mobilization temperature of metal fuel are required essentially. In this study, review of the technical status on the liquidus/solidus temperature of metal fuel was carried out to investigate the behavior of liquidus/solidus/relocation of metal fuel.

  5. Technical success, technique efficacy and complications of minimally-invasive imaging-guided percutaneous ablation procedures of breast cancer: A systematic review and meta-analysis.

    Science.gov (United States)

    Mauri, Giovanni; Sconfienza, Luca Maria; Pescatori, Lorenzo Carlo; Fedeli, Maria Paola; Alì, Marco; Di Leo, Giovanni; Sardanelli, Francesco

    2017-08-01

    To systematically review studies concerning imaging-guided minimally-invasive breast cancer treatments. An online database search was performed for English-language articles evaluating percutaneous breast cancer ablation. Pooled data and 95% confidence intervals (CIs) were calculated. Technical success, technique efficacy, minor and major complications were analysed, including ablation technique subgroup analysis and effect of tumour size on outcome. Forty-five studies were analysed, including 1,156 patients and 1,168 lesions. Radiofrequency (n=577; 50%), microwaves (n=78; 7%), laser (n=227; 19%), cryoablation (n=156; 13%) and high-intensity focused ultrasound (HIFU, n=129; 11%) were used. Pooled technical success was 96% (95%CI 94-97%) [laser=98% (95-99%); HIFU=96% (90-98%); radiofrequency=96% (93-97%); cryoablation=95% (90-98%); microwave=93% (81-98%)]. Pooled technique efficacy was 75% (67-81%) [radiofrequency=82% (74-88); cryoablation=75% (51-90); laser=59% (35-79); HIFU=49% (26-74)]. Major complications pooled rate was 6% (4-8). Minor complications pooled rate was 8% (5-13%). Differences between techniques were not significant for technical success (p=0.449), major complications (p=0.181) or minor complications (p=0.762), but significant for technique efficacy (p=0.009). Tumour size did not impact on variables (p>0.142). Imaging-guided percutaneous ablation techniques of breast cancer have a high rate of technical success, while technique efficacy remains suboptimal. Complication rates are relatively low. • Imaging-guided ablation techniques for breast cancer are 96% technically successful. • Overall technique efficacy rate is 75% but largely inhomogeneous among studies. • Overall major and minor complication rates are low (6-8%).

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  7. Detection of Frauds and Other Non-technical Losses in Power Utilities using Smart Meters: A Review

    Science.gov (United States)

    Ahmad, Tanveer; Ul Hasan, Qadeer

    2016-06-01

    Analysis of losses in power distribution system and techniques to mitigate these are two active areas of research especially in energy scarce countries like Pakistan to increase the availability of power without installing new generation. Since total energy losses account for both technical losses (TL) as well as non-technical losses (NTLs). Utility companies in developing countries are incurring of major financial losses due to non-technical losses. NTLs lead to a series of additional losses, such as damage to the network (infrastructure and the reduction of network reliability) etc. The purpose of this paper is to perform an introductory investigation of non-technical losses in power distribution systems. Additionally, analysis of NTLs using consumer energy consumption data with the help of Linear Regression Analysis has been carried out. This data focuses on the Low Voltage (LV) distribution network, which includes: residential, commercial, agricultural and industrial consumers by using the monthly kWh interval data acquired over a period (one month) of time using smart meters. In this research different prevention techniques are also discussed to prevent illegal use of electricity in the distribution of electrical power system.

  8. Review of Web-Based Technical Documentation Processes. FY07 NAEP-QA Special Study Report. TR-08-17

    Science.gov (United States)

    Gribben, Monica; Wise, Lauress; Becker, D. E.

    2008-01-01

    Beginning with the 2000 and 2001 National Assessment of Educational Progress (NAEP) assessments, the National Center for Education Statistics (NCES) has made technical documentation available on the worldwide web at http://nces.ed.gov/nationsreportcard/tdw/. The web-based documentation is designed to be less dense and more accessible than prior…

  9. 48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

    Science.gov (United States)

    2010-10-01

    .... (4) A statement analyzing what necessitated the modification (e.g., a design error, technical changes... COTR's independent cost evaluation. (iii) The architect/engineer's independent cost evaluation, if... as negotiation criteria. (c) For a proposed modification to an architect/engineer contract,...

  10. A Review of the Availability of Primary Scientific and Technical Documents within the United States, Volume I. Final Report.

    Science.gov (United States)

    Wood, James L.

    Volume I of this three-volume final report contains a summary of the objectives and results of a study conducted by Chemical Abstracts Service (CAS), a Division of the American Chemical Society (ACS), to determine the availability of the scientific and technical primary literature which the user identifies through the use of secondary services…

  11. Reviews on the Research Methods and Methodology of Technical Economics%技术经济学研究方法及方法论述评

    Institute of Scientific and Technical Information of China (English)

    蔡跃洲

    2009-01-01

    在对技术经济学研究对象及研究方法进行梳理的基础上,本文归纳出技术经济学研究方法体系多学科综合交叉、定量定性分析相结合等特点.这些特点是由学科本身的综合性、交叉性、边缘性所决定的.在技术经济学研究众多庞杂方法背后贯穿着系统论思想的指导.未来,随着学科研究对象复杂程度的不断提高,以系统论为指导的"从定性到定量综合集成法"等工具将广泛应用于技术经济学研究中.%Reviewing on the research objects and methods of Technical Econom- ics, it is summed up that the research methods of technical economics have the characters of integrating different subjects and combining quantitative and qualita-tive analyses. These characters were determined by the synthesis, intercrossing, and marginality of technical economics. Behind the variety of different methods, it is the methodology of system theory. With the increase of complexity of research objects, recta-synthesis from qualitative to quantitative would be widely applied in the research of technical economics in the future.

  12. A Review of the Risk in Public Works Projects and Risk Assignment Associated with the Technical Proposals

    Science.gov (United States)

    Baba, Kazuhito; Miyatake, Ichiro; Kudo, Masataka; Yokoi, Hiroyuki; Fueta, Toshiharu

    By the enactment of the Bill for Ensuring the Quality of Public Works in 2005, which requires due consideration for the use of technical proposals, or iginality, and ingenuity of the private companies, as well as allows to cap estimates based on the results of evaluations of proposals involving advanced technologies, it becomes easier to request the technical proposals including the design of the structure. With this institutional arrangement, the Ministry of Land, Infrastructure, Transport and the Tourism (MLIT) tries the design-build method etc., in the aim of further utilizing the technical proposals of private companies. Although the design-build method allows a wider range of flexibility in proposals, there is a certain risk associated with this method, as it requires the tender price to be decided when the site condition is unclear. The risk was taken by the contractors when the design-build method was used on a trial basis, for the purpose of ensuring fair competitiveness. However, it was decided that the client shares the risk to some extent, after it was found that such risk assignment was not appropriate in some cases. In view of this background, this study examines the actual risk associated with the examples of public works projects, in the aim of providing basic information used in future discussions, as to how fair competitiveness shall be ensured, while the client shares some risk.

  13. Program Review - Geothermal Exploration and Assessment Technology Program; Including a Report of the Reservoir Engineering Technical Advisory Group

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, Dennis L., ed.

    1979-12-01

    In 1978, The Division of Geothermal Energy of the Department of Energy established the Geothermal Exploration and Assessment Technology Program. The purpose of this program is to ''provide assistance to the Nation's industrial community by helping to remove technical and associated economic barriers which presently inhibit efforts to bring geothermal electric power production and direct heat application on line''. In the near term this involves the adaptation of exploration and assessment techniques from the mineral and petroleum industry to geothermal applications. In the near to far term it involves the development of new technology which will improve the cost effectiveness of geothermal exploration.

  14. The effect of rigid and non-rigid connections between implants and teeth on biological and technical complications: a systematic review and a meta-analysis.

    Science.gov (United States)

    Tsaousoglou, Phoebus; Michalakis, Konstantinos; Kang, Kiho; Weber, Hans-Peter; Sculean, Anton

    2017-07-01

    To assess survival, as well as technical and biological complication rates of partial fixed dental prostheses (FDPs) supported by implants and teeth. An electronic Medline search was conducted to identify articles, published in dental journals from January 1980 to August 2015, reporting on partial FDPs supported by implants and teeth. The search terms were categorized into four groups comprising the PICO question. Manual searches of published full-text articles and related reviews were also performed. The initial database search produced 3587 relevant titles. Three hundred and eighty-six articles were retrieved for abstract review, while 39 articles were selected for full-text review. A total of 10 studies were selected for inclusion. Overall survival rate for implants ranged between 90% and 100%, after follow-up periods with a mean range of 18-120 months. The survival of the abutment teeth was 94.1-100%, while the prostheses survival was 85-100% for the same time period. The most frequent complications were "periapical lesions" (11.53%). The most frequent technical complication was "porcelain occlusal fracture" (16.6%), followed by "screw loosening" (15%). According to the meta-analysis, no intrusion was noted on the rigid connection group, while five teeth (8.19%) were intruded in the non-rigid connection group [95% CI (0.013-0.151)]. The tooth-implant FDP seems to be a possible alternative to an implant-supported FDP. There is limited evidence that rigid connection between teeth and implants presents better results when compared with the non-rigid one. The major drawback of non-rigidly connected FDPs is tooth intrusion. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  15. A Review of the Definition and Measurement of Poverty: Volume I, Summary Review Paper; Volume II, Annotated Bibliography. The Measure of Poverty, Technical Paper III.

    Science.gov (United States)

    Oster, Sharon; And Others

    This study reviews the existing literature on a series of issues associated with the defintion and measurement of poverty, and it consists of a summary report covering this research (Volume I), and an annotated bibliography (Volume II). Eleven specific issues were identified and reviewed in this study: (1) the historical definitions of poverty,…

  16. DOE-DARPA High-Performance Corrosion-Resistant Materials (HPCRM), Annual HPCRM Team Meeting & Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J; Brown, B; Bayles, B; Lemieux, T; Choi, J; Ajdelsztajn, L; Dannenberg, J; Lavernia, E; Schoenung, J; Branagan, D; Blue, C; Peter, B; Beardsley, B; Graeve, O; Aprigliano, L; Yang, N; Perepezko, J; Hildal, K; Kaufman, L; Lewandowski, J; Perepezko, J; Hildal, K; Kaufman, L; Lewandowski, J; Boudreau, J

    2007-09-21

    The overall goal is to develop high-performance corrosion-resistant iron-based amorphous-metal coatings for prolonged trouble-free use in very aggressive environments: seawater & hot geothermal brines. The specific technical objectives are: (1) Synthesize Fe-based amorphous-metal coating with corrosion resistance comparable/superior to Ni-based Alloy C-22; (2) Establish processing parameter windows for applying and controlling coating attributes (porosity, density, bonding); (3) Assess possible cost savings through substitution of Fe-based material for more expensive Ni-based Alloy C-22; (4) Demonstrate practical fabrication processes; (5) Produce quality materials and data with complete traceability for nuclear applications; and (6) Develop, validate and calibrate computational models to enable life prediction and process design.

  17. Apheresis therapy in children: an overview of key technical aspects and a review of experience in pediatric renal disease.

    Science.gov (United States)

    Hunt, Elizabeth A K; Jain, Namrata G; Somers, Michael J G

    2013-02-01

    Although there is less experience with its use in children than adults, apheresis can be a life-saving treatment modality in certain pediatric diseases. With attention to specific technical aspects of the treatment, especially circuit volume, apheresis can be safely performed in children of any age or size. Even in pediatric diseases where it is recognized as an important part of therapy, apheresis is unfortunately still underutilized in North America and there needs to be increased awareness of its role and its availability within the pediatric community. Apheresis has been used particularly in children with certain renal diseases, notably ANCA-associated nephritis, anti-GBM disease, and atypical HUS. In addition, it can improve outcomes in transplantation of children with FSGS and can be part of a pre-transplant strategy for children who are highly sensitized and at high risk for graft failure.

  18. Computed tomography and magnetic resonance imaging contrast media injectors: technical feature review – what is really needed?

    Directory of Open Access Journals (Sweden)

    Friebe M

    2016-07-01

    Full Text Available Michael Friebe Institute of Medical Engineering, Otto-von-Guericke-University, Magdeburg, Germany Abstract: There has been little technical innovation over the last few years for contrast media (CM injectors that are used for diagnostic imaging (computed tomography [CT], magnetic resonance imaging [MRI], and hybrid imaging systems, such as positron emission tomography–CT or magnetic resonance–positron emission tomography examinations. The medical need of CM for the enhancement of diagnostic images has been around for a long time, but the application of the CM into the blood stream comes with potential medical complications for the patient and requires a lot of operator experience and training. Most power injector systems that are currently used can do significantly more than what is typically required; this complexity however, adds error potential and cost. This paper focuses on the main features that CM injector systems should have and highlights the technical developments that are useful to have but which add complexity and cost, increase setup time, and require intensive training for safe use. CM injection protocols are very different between CT and MRI, with CT requiring many more variances, has a need for multiphase protocols, and requires a higher timing accuracy. A CM injector used in the MRI suite, on the other-hand, could only need a relatively time insensitive injection with a standard injection flow rate and a volume that is dependent on the patients’ weight. This would make easy and lightweight systems possible, which are able to safely and accurately perform the injection task, while allowing full MRI compatibility with relatively low cost investment and consumable costs. Keywords: power injector, contrast media injection, injection protocols, MRI compatibility

  19. Transcranial direct current stimulation (tDCS in behavioral and food addiction: A systematic review of efficacy, technical and methodological issues

    Directory of Open Access Journals (Sweden)

    Anne eSauvaget

    2015-10-01

    Full Text Available Objectives.Behavioral addictions (BA are complex disorders for which pharmacological and psychotherapeutic treatments have shown their limits. Non-invasive brain stimulation, among which transcranial direct current stimulation (tDCS, has opened up new perspectives in addiction treatment. The purpose of this work is to conduct a critical and systematic review of tDCS efficacy, and of technical and methodological considerations in the field of BA.Methods.A bibliographic search has been conducted on the Medline and ScienceDirect databases until December 2014, based on the following selection criteria: clinical studies on tDCS and BA (namely eating disorders, compulsive buying, Internet addiction, pathological gambling, sexual addiction, sports addiction, video games addiction. Study selection, data analysis and reporting were conducted according to the PRISMA guidelines.Results.Out of 402 potential articles, seven studies were selected. So far focusing essentially on abnormal eating, these studies suggest that tDCS (right prefrontal anode / left prefrontal cathode reduces food craving induced by visual stimuli.ConclusionsDespite methodological and technical differences between studies, the results are promising. So far, only few studies of tDCS in BA have been conducted. New research is recommended on the use of tDCS in BA, other than eating disorders.

  20. The use of repetitive transcranial magnetic stimulation for modulating craving and addictive behaviours: a critical literature review of efficacy, technical and methodological considerations.

    Science.gov (United States)

    Grall-Bronnec, M; Sauvaget, A

    2014-11-01

    Repetitive transcranial magnetic stimulation (rTMS) is a potential therapeutic intervention for the treatment of addiction. This critical review aims to summarise the recent developments with respect to the efficacy of rTMS for all types of addiction and related disorders (including eating disorders), and concentrates on the associated methodological and technical issues. The bibliographic search consisted of a computerised screening of the Medline and ScienceDirect databases up to December 2013. Criteria for inclusion were the target problem was an addiction, a related disorder, or craving; the intervention was performed using rTMS; and the study was a clinical trial. Of the potential 638 articles, 18 met the criteria for inclusion. Most of these (11 of the 18) supported the efficacy of rTMS, especially in the short term. In most cases, the main assessment criterion was the measurement of craving using a Visual Analogue Scale. The results are discussed with respect to the study limitations and, in particular, the many methodological and technical discrepancies that were identified. Key recommendations are provided.

  1. Electronic apex locator: A comprehensive literature review — Part II: Effect of different clinical and technical conditions on electronic apex locator′s accuracy

    Directory of Open Access Journals (Sweden)

    Hamid Razavian

    2014-01-01

    Full Text Available Introduction: To investigate the effects of different clinical and technical conditions on the accuracy of electronic apex locators (EALs. Materials and Methods: "Tooth apex," "dental instrument," "odontometry," "electronic medical," and "electronic apex locator" were searched as primary identifiers via Medline/PubMed, Cochrane library, and Scopus data base up to 30 July 2013. Original articles that fulfilled the inclusion criteria were selected and reviewed. Results: Out of 402 relevant studies, 183 were selected based on the inclusion criteria. In this part, 75 studies are presented. Pulp vitality conditions and root resorption, types of files and irrigating materials do not affect an EAL′s accuracy; however, the file size and foramen diameter can affect its accuracy. Conclusions: Various clinical conditions such as the file size and foramen diameter may affect EALs′ accuracy. However, more randomized clinical trials are needed for definitive conclusion.

  2. In-Vivo Proton Magnetic Resonance Spectroscopy of 2-Hydroxyglutarate in Isocitrate Dehydrogenase-Mutated Gliomas: A Technical Review for Neuroradiologists

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeonjin [Department of Radiology, Seoul National University Hospital, Seoul 03080 (Korea, Republic of); Department of Biomedical Sciences, Seoul National University, Seoul 03087 (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 03080 (Korea, Republic of); Kim, Sungjin [Department of Radiology, Seoul National University Hospital, Seoul 03080 (Korea, Republic of); Lee, Hyeong Hun; Heo, Hwon [Department of Biomedical Sciences, Seoul National University, Seoul 03087 (Korea, Republic of)

    2016-11-01

    The diagnostic and prognostic potential of an onco-metabolite, 2-hydroxyglutarate (2HG) as a proton magnetic resonance spectroscopy (1H-MRS) detectable biomarker of the isocitrate dehydrogenase (IDH)-mutated (IDH-MT) gliomas has drawn attention of neuroradiologists recently. However, due to severe spectral overlap with background signals, quantification of 2HG can be very challenging. In this technical review for neuroradiologists, first, the biochemistry of 2HG and its significance in the diagnosis of IDH-MT gliomas are summarized. Secondly, various 1H-MRS methods used in the previous studies are outlined. Finally, wereview previous in vivo studies, and discuss the current status of 1H-MRS in the diagnosis of IDH-MT gliomas.

  3. In-Vivo proton magnetic resonance spectroscopy of 2-Hydroxyglutarate in isocitrate dehydrogenase-mutated gliomas: A technical review for neuroradiologists

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeon Jin; Kim, Sung Jin [Dept. of Radiology, Seoul National University Hospital, Seoul (Korea, Republic of); Lee, Hyeong Hun; Heo, Hwon [Dept. of Biomedical Sciences, Seoul National University, Seoul (Korea, Republic of)

    2016-09-15

    The diagnostic and prognostic potential of an onco-metabolite, 2-hydroxyglutarate (2HG) as a proton magnetic resonance spectroscopy (1H-MRS) detectable biomarker of the isocitrate dehydrogenase (IDH)-mutated (IDH-MT) gliomas has drawn attention of neuroradiologists recently. However, due to severe spectral overlap with background signals, quantification of 2HG can be very challenging. In this technical review for neuroradiologists, first, the biochemistry of 2HG and its significance in the diagnosis of IDH-MT gliomas are summarized. Secondly, various 1H-MRS methods used in the previous studies are outlined. Finally, were view previous in vivo studies, and discuss the current status of 1H-MRS in the diagnosis of IDH-MT gliomas.

  4. TECHNICAL NOTE: Review of the mechanics of materials models for one-dimensional surface-bonded piezoelectric actuators

    Science.gov (United States)

    Alzahrani, Bandar A.; Alghamdi, Abdulmalik A. A.

    2003-06-01

    This note reviews the commonest and simplest theoretical models used in modelling one-dimensional smart structures. These models can be used for any type of induced strain; however, the piezoelectric actuator is used here as a typical active element. A numerical example is given to show the differences among these models especially as regards the strain induced in the beam.

  5. Essential interventions on workers' health by primary health care : a scoping review of the literature: a technical report

    NARCIS (Netherlands)

    Buijs, P.; Dijk, F. van

    2014-01-01

    The TNO review Essential interventions on Workers’ Health by Primary Health Care shows those interventions in primary, secondary and tertiary prevention are necessary and feasible but not yet satisfactorily evidence-based. Necessary, because primary or community health care covers about 80% of the w

  6. tDCS of the cerebellum: where do we stand in 2016? Technical issues and critical review of the literature

    Directory of Open Access Journals (Sweden)

    Kim evan Dun

    2016-05-01

    Full Text Available Transcranial Direct Current Stimulation (tDCS is an up-and-coming electrical neurostimulation technique increasingly used both in healthy subjects and in selected groups of patients. Due to the high density of neurons in the cerebellum, its peculiar anatomical organization with the cortex lying superficially below the skull and its diffuse connections with motor and associative areas of the cerebrum, the cerebellum is becoming a major target for neuromodulation of the cerebellocerebral networks. We discuss the recent studies based on cerebellar tDCS with a focus on the numerous technical and open issues which remain to be solved. Our current knowledge of the physiological impacts of tDCS on cerebellar circuitry is criticized. We provide a comparison with transcranial Alternating Current Stimulation (tACS, another promising transcranial electrical neurostimulation technique. Although both tDCS and tACS are becoming established techniques to modulate the cerebellocerebral networks, it is surprising that their impacts on cerebellar disorders remains unclear. A major reason is that the literature lacks large trials with a double-blind, sham-controlled and cross-over experimental design in cerebellar patients.

  7. tDCS of the Cerebellum: Where Do We Stand in 2016? Technical Issues and Critical Review of the Literature.

    Science.gov (United States)

    van Dun, Kim; Bodranghien, Florian C A A; Mariën, Peter; Manto, Mario U

    2016-01-01

    Transcranial Direct Current Stimulation (tDCS) is an up-and-coming electrical neurostimulation technique increasingly used both in healthy subjects and in selected groups of patients. Due to the high density of neurons in the cerebellum, its peculiar anatomical organization with the cortex lying superficially below the skull and its diffuse connections with motor and associative areas of the cerebrum, the cerebellum is becoming a major target for neuromodulation of the cerebellocerebral networks. We discuss the recent studies based on cerebellar tDCS with a focus on the numerous technical and open issues which remain to be solved. Our current knowledge of the physiological impacts of tDCS on cerebellar circuitry is criticized. We provide a comparison with transcranial Alternating Current Stimulation (tACS), another promising transcranial electrical neurostimulation technique. Although both tDCS and tACS are becoming established techniques to modulate the cerebellocerebral networks, it is surprising that their impacts on cerebellar disorders remains unclear. A major reason is that the literature lacks large trials with a double-blind, sham-controlled, and cross-over experimental design in cerebellar patients.

  8. Technical and regulatory review of the Rover nuclear fuel process for use on Fort St. Vrain fuel

    Energy Technology Data Exchange (ETDEWEB)

    Hertzler, T. [Science Applications International Corp., Idaho Falls, ID (United States)

    1993-02-01

    This report describes the results of an analysis for processing and final disposal of Fort St. Vrain (FSV) irradiated fuel in Rover-type equipment or technologies. This analysis includes an evaluation of the current Rover equipment status and the applicability of this technology in processing FSV fuel. The analyses are based on the physical characteristics of the FSV fuel and processing capabilities of the Rover equipment. Alternate FSV fuel disposal options are also considered including fuel-rod removal from the block, disposal of the empty block, or disposal of the entire fuel-containing block. The results of these analyses document that the current Rover hardware is not operable for any purpose, and any effort to restart this hardware will require extensive modifications and re-evaluation. However, various aspects of the Rover technology, such as the successful fluid-bed burner design, can be applied with modification to FSV fuel processing. The current regulatory climate and technical knowledge are not adequately defined to allow a complete analysis and conclusion with respect to the disposal of intact fuel blocks with or without the fuel rods removed. The primary unknowns include the various aspects of fuel-rod removal from the block, concentration of radionuclides remaining in the graphite block after rod removal, and acceptability of carbon in the form of graphite in a high level waste repository.

  9. Response to the independent technical review of the UMTRA Project procedures and practices for well drilling and development

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This report is a response to the findings and recommendations contained in the ITR report. The text of this document summarizes each ITR finding and recommendation, presents the TAC response, and concludes that implementation of many of the recommendations would benefit the UMTRA Project. Implementation of the recommendations represents ongoing improvement to the TAC well installation and development procedures and will result, in lower overall project costs. Appendix B is an implementation plan that groups similar or complementary action items, provides a schedule for implementation, identifies the group or people responsible for the changes, and estimates hours to implement the changes. The four major action items are as follows: (1) ITR Reevaluation, (2) Well Installation SOP Review and Revision, (3) Well Installation Contract Review and Revision, and (4) TAC and DOE Communications Improvement. The hours listed to implement the improvements are intended to be estimates for budgeting and planning purposes for the remainder of this fiscal year and the upcoming fiscal year.

  10. A technical review of urban land use - transportation models as tools for evaluating vehicle travel reduction strategies

    Energy Technology Data Exchange (ETDEWEB)

    Southworth, F.

    1995-07-01

    The continued growth of highway traffic in the United States has led to unwanted urban traffic congestion as well as to noticeable urban air quality problems. These problems include emissions covered by the 1990 Clean Air Act Amendments (CAAA) and 1991 Intermodal Surface Transportation Efficiency Act (ISTEA), as well as carbon dioxide and related {open_quotes}greenhouse gas{close_quotes} emissions. Urban travel also creates a major demand for imported oil. Therefore, for economic as well as environmental reasons, transportation planning agencies at both the state and metropolitan area level are focussing a good deal of attention on urban travel reduction policies. Much discussed policy instruments include those that encourage fewer trip starts, shorter trip distances, shifts to higher-occupancy vehicles or to nonvehicular modes, and shifts in the timing of trips from the more to the less congested periods of the day or week. Some analysts have concluded that in order to bring about sustainable reductions in urban traffic volumes, significant changes will be necessary in the way our households and businesses engage in daily travel. Such changes are likely to involve changes in the ways we organize and use traffic-generating and-attracting land within our urban areas. The purpose of this review is to evaluate the ability of current analytic methods and models to support both the evaluation and possibly the design of such vehicle travel reduction strategies, including those strategies involving the reorganization and use of urban land. The review is organized into three sections. Section 1 describes the nature of the problem we are trying to model, Section 2 reviews the state of the art in operational urban land use-transportation simulation models, and Section 3 provides a critical assessment of such models as useful urban transportation planning tools. A number of areas are identified where further model development or testing is required.

  11. Endoscopic ultrasound guided drainage of pancreatic fluidcollections: Assessment of the procedure, technical detailsand review of the literature

    Institute of Scientific and Technical Information of China (English)

    Rajesh Puri; Ragesh Babu Thandassery; Abdulrahman A Alfadda; Saad Al Kaabi

    2015-01-01

    Endoscopic ultrasound (EUS) guided drainage ofpancreatic fluid collections (PFC) has become increasinglypopular and become first line managementoptionin many centers. Use of therapeutic echoendoscopeshas greatly increased the applicability of EUS guidedtransmural drainage. Drainage is indicated insymptomatic PFCs, PFC related infection, bleed, luminalobstruction, fistulization and biliary obstruction. EUSguided transmural drainage of PFCs is preferred inpatients with non bulging lesions, portal hypertension,bleeding tendency and in those whom conventionaldrainage has failed. In the present decade significantprogress has been made in minimally invasive endoscopictechniques. There are newer stent designs,access devices and techniques for more efficientdrainage of PFCs. In this review, we discuss the EUSguided drainage of PFCs in acute pancreatitis.

  12. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  13. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  14. NRC nuclear waste management technical support in the development of nuclear waste form criteria. Task 4. Test development review

    Energy Technology Data Exchange (ETDEWEB)

    Czyscinski, K.S.; Swyler, K.J.; Klamut, C.J.

    1980-05-01

    This interim report concerns the development of testing procedures to assess the performance of waste packages to be used for high-level waste disposal in geologic repositories. Single component testing of the waste package is determined to be a workable strategy for testing and evaluation in terms of NRC release rate criteria. An initial literature review has identified key tests and those variables which must be included in testing procedures to simulate repository conditions. The range of these conditions remains to be determined precisely. Methods for leach, corrosion, and sorption testing are reviewed and initial recommendations made for preferred procedures. A combination of static and dynamic tests is needed to evaluate waste package component performance. Additional research is necessary in certain areas both to establish reliable testing methods and to define the range of testing variables. Research recommendations are included in the report. Ancillary measurements will be required to ensure that key tests rigorously assess the durability of waste package components under anticipated repository conditions. In particular, radiation effects in the repository environment must be considered and, where necessary, simulated during critical testing. Research is recommended to aid in determining when and how this should be done.

  15. The Effects of Degraded Digital Instrumentation and Control Systems on Human-system Interfaces and Operator Performance: HFE Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.; W. Gunther, G. Martinez-Guridi

    2010-02-26

    New and advanced reactors will use integrated digital instrumentation and control (I&C) systems to support operators in their monitoring and control functions. Even though digital systems are typically highly reliable, their potential for degradation or failure could significantly affect operator performance and, consequently, impact plant safety. The U.S. Nuclear Regulatory Commission (NRC) supported this research project to investigate the effects of degraded I&C systems on human performance and plant operations. The objective was to develop human factors engineering (HFE) review guidance addressing the detection and management of degraded digital I&C conditions by plant operators. We reviewed pertinent standards and guidelines, empirical studies, and plant operating experience. In addition, we conducted an evaluation of the potential effects of selected failure modes of the digital feedwater system on human-system interfaces (HSIs) and operator performance. The results indicated that I&C degradations are prevalent in plants employing digital systems and the overall effects on plant behavior can be significant, such as causing a reactor trip or causing equipment to operate unexpectedly. I&C degradations can impact the HSIs used by operators to monitor and control the plant. For example, sensor degradations can make displays difficult to interpret and can sometimes mislead operators by making it appear that a process disturbance has occurred. We used the information obtained as the technical basis upon which to develop HFE review guidance. The guidance addresses the treatment of degraded I&C conditions as part of the design process and the HSI features and functions that support operators to monitor I&C performance and manage I&C degradations when they occur. In addition, we identified topics for future research.

  16. Technical Review Report for the Model 9975-96 Package Safety Analysis Report for Packaging (S-SARP-G-00003, Revision 0, January 2008)

    Energy Technology Data Exchange (ETDEWEB)

    West, M

    2009-05-22

    This Technical Review Report (TRR) documents the review, performed by the Lawrence Livermore National Laboratory (LLNL) Staff, at the request of the U.S. Department of Energy (DOE), on the Safety Analysis Report for Packaging, Model 9975, Revision 0, dated January 2008 (S-SARP-G-00003, the SARP). The review includes an evaluation of the SARP, with respect to the requirements specified in 10 CFR 71, and in International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1. The Model 9975-96 Package is a 35-gallon drum package design that has evolved from a family of packages designed by DOE contractors at the Savannah River Site. Earlier package designs, i.e., the Model 9965, the Model 9966, the Model 9967, and the Model 9968 Packagings, were originally designed and certified in the early 1980s. In the 1990s, updated package designs that incorporated design features consistent with the then newer safety requirements were proposed. The updated package designs at the time were the Model 9972, the Model 9973, the Model 9974, and the Model 9975 Packagings, respectively. The Model 9975 Package was certified by the Packaging Certification Program, under the Office of Safety Management and Operations. The safety analysis of the Model 9975-85 Packaging is documented in the Safety Analysis Report for Packaging, Model 9975, B(M)F-85, Revision 0, dated December 2003. The Model 9975-85 Package is certified by DOE Certificate of Compliance (CoC) package identification number, USA/9975/B(M)F-85, for the transportation of Type B quantities of uranium metal/oxide, {sup 238}Pu heat sources, plutonium/uranium metals, plutonium/uranium oxides, plutonium composites, plutonium/tantalum composites, {sup 238}Pu oxide/beryllium metal.

  17. Technical review of managed underground storage of water study of the upper Catherine Creek watershed, Union County, northeastern Oregon

    Science.gov (United States)

    Snyder, Daniel T.

    2014-01-01

    Because of water diversions during summer, flow in Catherine Creek, a tributary to the Grande Ronde River in northeastern Oregon, is insufficient to sustain several aquatic species for which the stream is listed as critical habitat. A feasibility study for managed underground storage (MUS) in the upper Catherine Creek watershed in Union County, Oregon, was undertaken by Anderson Perry and Associates, Inc., to address the issue of low flows in summer. The results of the study were released as a report titled “Upper Catherine Creek Storage Feasibility Study for Grande Ronde Model Watershed,” which evaluated the possibility of diverting Catherine Creek streamflow during winter (when stream discharge is high), storing the water by infiltration or injection into an aquifer adjacent to the stream, and discharging the water back to the stream in summer to augment low flows. The method of MUS would be accomplished using either (1) aquifer storage and recovery (ASR) that allows for the injection of water that meets drinking-water-quality standards into an aquifer for later recovery and use, or (2) artificial recharge (AR) that involves the intentional addition of water diverted from another source to a groundwater reservoir. Concerns by resource managers that the actions taken to improve water availability for upper Catherine Creek be effective, cost-efficient, long-term, and based on sound analysis led the National Fish and Wildlife Foundation to request that the U.S. Geological Survey conduct an independent review and evaluation of the feasibility study. This report contains the results of that review. The primary objectives of the Anderson Perry and Associates study reviewed here included (1) identifying potentially fatal flaws with the concept of using AR and (or) ASR to augment the streamflow of Catherine Creek, (2) identifying potentially favorable locations for augmenting streamflow, (3) developing and evaluating alternatives for implementing AR and (or) ASR, and

  18. Research safety vehicle program (Phase II) specification review. Volume II. Final technical report, Jul 1975--Nov 1976

    Energy Technology Data Exchange (ETDEWEB)

    Pugliese, S.M.

    1977-02-01

    In Phase I of the Research Safety Vehicle Program (RSV), preliminary design and performance specifications were developed for a mid-1980's vehicle that integrates crashworthiness and occupant safety features with material resource conservation, economy, and producibility. Phase II of the program focused on development of the total vehicle design via systems engineering and integration analyses. As part of this effort, it was necessary to continuously review the Phase I recommended performance specification in relation to ongoing design/test activities. This document contains the results of analyses of the Phase I specifications. The RSV is expected to satisfy all of the producibility and safety related specifications, i.e., handling and stability systems, crashworthiness, occupant protection, pedestrian/cyclist protection, etc.

  19. Endoscopic Ultrasound-Guided Fine-Needle Aspiration of Pancreatic Lesions: A Systematic Review of Technical and Procedural Variables.

    Science.gov (United States)

    Jani, Bhairvi S; Rzouq, Fadi; Saligram, Shreyas; Lim, Diego; Rastogi, Amit; Bonino, John; Olyaee, Mojtaba

    2016-01-01

    Endoscopic ultrasound (EUS)-guided tissue acquisition has emerged over the last decade as an invaluable diagnostic tool in approaching the different pancreatic lesions. Given the safety and minimal invasiveness of this approach combined with the high diagnostic yield, it became the standard of care when dealing with different pancreatic pathologies. However, some variables regarding this procedure remain not fully understood. These can influence the diagnostic yield of the procedure and include the presence of the on-site cytopathologist, the type and size of the needle used as well as obtaining aspiration versus core biopsy, the number of passes and the sampling technique, and the role of suction and stylet use among others. We performed a comprehensive literature search using PubMed, Google Scholar, and Embase for studies that assessed these variables. Eligible studies were analyzed using several parameters such as technique and procedure, with the aim of reviewing results from an evidence-based standpoint.

  20. Endoscopic ultrasound-guided fine-needle aspiration of pancreatic lesions: A systematic review of technical and procedural variables

    Directory of Open Access Journals (Sweden)

    Bhairvi S Jani

    2016-01-01

    Full Text Available Endoscopic ultrasound (EUS-guided tissue acquisition has emerged over the last decade as an invaluable diagnostic tool in approaching the different pancreatic lesions. Given the safety and minimal invasiveness of this approach combined with the high diagnostic yield, it became the standard of care when dealing with different pancreatic pathologies. However, some variables regarding this procedure remain not fully understood. These can influence the diagnostic yield of the procedure and include the presence of the on-site cytopathologist, the type and size of the needle used as well as obtaining aspiration versus core biopsy, the number of passes and the sampling technique, and the role of suction and stylet use among others. We performed a comprehensive literature search using PubMed, Google Scholar, and Embase for studies that assessed these variables. Eligible studies were analyzed using several parameters such as technique and procedure, with the aim of reviewing results from an evidence-based standpoint.

  1. Endoscopic ultrasound guided drainage of pancreatic fluid collections: Assessment of the procedure, technical details and review of the literature.

    Science.gov (United States)

    Puri, Rajesh; Thandassery, Ragesh Babu; Alfadda, Abdulrahman A; Kaabi, Saad Al

    2015-04-16

    Endoscopic ultrasound (EUS) guided drainage of pancreatic fluid collections (PFC) has become increasingly popular and become first line management option in many centers. Use of therapeutic echoendoscopes has greatly increased the applicability of EUS guided transmural drainage. Drainage is indicated in symptomatic PFCs, PFC related infection, bleed, luminal obstruction, fistulization and biliary obstruction. EUS guided transmural drainage of PFCs is preferred in patients with non bulging lesions, portal hypertension, bleeding tendency and in those whom conventional drainage has failed. In the present decade significant progress has been made in minimally invasive endoscopic techniques. There are newer stent designs, access devices and techniques for more efficient drainage of PFCs. In this review, we discuss the EUS guided drainage of PFCs in acute pancreatitis.

  2. Endoscopic Ultrasound-Guided Fine-Needle Aspiration of Pancreatic Lesions: A Systematic Review of Technical and Procedural Variables

    Science.gov (United States)

    Jani, Bhairvi S.; Rzouq, Fadi; Saligram, Shreyas; Lim, Diego; Rastogi, Amit; Bonino, John; Olyaee, Mojtaba

    2016-01-01

    Endoscopic ultrasound (EUS)-guided tissue acquisition has emerged over the last decade as an invaluable diagnostic tool in approaching the different pancreatic lesions. Given the safety and minimal invasiveness of this approach combined with the high diagnostic yield, it became the standard of care when dealing with different pancreatic pathologies. However, some variables regarding this procedure remain not fully understood. These can influence the diagnostic yield of the procedure and include the presence of the on-site cytopathologist, the type and size of the needle used as well as obtaining aspiration versus core biopsy, the number of passes and the sampling technique, and the role of suction and stylet use among others. We performed a comprehensive literature search using PubMed, Google Scholar, and Embase for studies that assessed these variables. Eligible studies were analyzed using several parameters such as technique and procedure, with the aim of reviewing results from an evidence-based standpoint. PMID:27011940

  3. Inertial Sensors to Assess Gait Quality in Patients with Neurological Disorders: A Systematic Review of Technical and Analytical Challenges

    Directory of Open Access Journals (Sweden)

    Aliénor Vienne

    2017-05-01

    Full Text Available Gait disorders are major causes of falls in patients with neurological diseases. Understanding these disorders allows prevention and better insights into underlying diseases. InertiaLocoGraphy (ILG –the quantification of gait by using inertial measurement units (IMUs –shows great potential to address this public health challenge, but protocols vary widely and normative values of gait parameters are still unavailable. This systematic review critically compares ILG protocols, questions features extracted from inertial signals and proposes a semeiological analysis of clinimetric characteristics for use in neurological clinical routine. For this systematic review, PubMed, Cochrane and EMBASE were searched for articles assessing gait quality by using IMUs that were published from January 1, 2014 to August 31, 2016. ILG was used to assess gait in a wide range of neurological disorders – including Parkinson disease, mild cognitive impairment, Alzheimer disease, cerebral palsy, and cerebellar atrophy – as well as in the faller or frail older population and in people presenting rheumatological pathologies. However, results have not yet been driving changes in clinical practice. One reason could be that studies mainly aimed at comparing pathological gait to healthy gait, but there is stronger need for semiological descriptions of gait perturbation, severity or prognostic assessment. Furthermore, protocols used to assess gait using IMUs are too many. Likely, outcomes are highly heterogeneous and difficult to compare across large panels of studies. Therefore, homogenization is needed to foster the use of ILG to assess gait quality in neurological routine practice. The pros and cons of each protocol are emphasized so that a compromise can be reached. As well, analysis of seven complementary clinical criteria (springiness, sturdiness, smoothness, steadiness, stability, symmetry, synchronization is advocated.

  4. Technical Note: Review of methods for linear least-squares fitting of data and application to atmospheric chemistry problems

    Directory of Open Access Journals (Sweden)

    C. A. Cantrell

    2008-04-01

    Full Text Available The representation of data, whether geophysical observations, numerical model output or laboratory results, by a best fit straight line is a routine practice in the geosciences and other fields. While the literature is full of detailed analyses of procedures for fitting straight lines to values with uncertainties, a surprising number of scientists blindly use the standard least squares method, such as found on calculators and in spreadsheet programs, that assumes no uncertainties in the x values. Here, the available procedures for estimating the best fit straight line to data, including those applicable to situations for uncertainties present in both the x and y variables, are reviewed. Representative methods that are presented in the literature for bivariate weighted fits are compared using several sample data sets, and guidance is presented as to when the somewhat more involved iterative methods are required, or when the standard least-squares procedure would be expected to be satisfactory. A spreadsheet-based template is made available that employs one method for bivariate fitting.

  5. Foramen magnum meningiomas: detailed surgical approaches and technical aspects at Lariboisière Hospital and review of the literature

    Science.gov (United States)

    George, Bernard

    2007-01-01

    Foramen magnum meningiomas are challenging tumors, requiring special considerations because of the vicinity of the medulla oblongata, the lower cranial nerves, and the vertebral artery. After detailing the relevant anatomy of the foramen magnum area, we will explain our classification system based on the compartment of development, the dural insertion, and the relation to the vertebral artery. The compartment of development is most of the time intradural and less frequently extradural or both intraextradural. Intradurally, foramen magnum meningiomas are classified posterior, lateral, and anterior if their insertion is, respectively, posterior to the dentate ligament, anterior to the dentate ligament, and anterior to the dentate ligament with extension over the midline. This classification system helps to define the best surgical approach and the lateral extent of drilling needed and anticipate the relation with the lower cranial nerves. In our department, three basic surgical approaches were used: the posterior midline, the postero-lateral, and the antero-lateral approaches. We will explain in detail our surgical technique. Finally, a review of the literature is provided to allow comparison with the treatment options advocated by other skull base surgeons. PMID:17882459

  6. Technical Note: Review of methods for linear least-squares fitting of data and application to atmospheric chemistry problems

    Directory of Open Access Journals (Sweden)

    C. A. Cantrell

    2008-09-01

    Full Text Available The representation of data, whether geophysical observations, numerical model output or laboratory results, by a best fit straight line is a routine practice in the geosciences and other fields. While the literature is full of detailed analyses of procedures for fitting straight lines to values with uncertainties, a surprising number of scientists blindly use the standard least-squares method, such as found on calculators and in spreadsheet programs, that assumes no uncertainties in the x values. Here, the available procedures for estimating the best fit straight line to data, including those applicable to situations for uncertainties present in both the x and y variables, are reviewed. Representative methods that are presented in the literature for bivariate weighted fits are compared using several sample data sets, and guidance is presented as to when the somewhat more involved iterative methods are required, or when the standard least-squares procedure would be expected to be satisfactory. A spreadsheet-based template is made available that employs one method for bivariate fitting.

  7. Obesity in older adults: technical review and position statement of the American Society for Nutrition and NAASO, The Obesity Society.

    Science.gov (United States)

    Villareal, Dennis T; Apovian, Caroline M; Kushner, Robert F; Klein, Samuel

    2005-11-01

    Obesity causes serious medical complications and impairs quality of life. Moreover, in older persons, obesity can exacerbate the age-related decline in physical function and lead to frailty. However, appropriate treatment for obesity in older persons is controversial because of the reduction in relative health risks associated with increasing body mass index and the concern that weight loss could have potential harmful effects in the older population. This joint position statement from the American Society for Nutrition and the NAASO, The Obesity Society reviews the clinical issues related to obesity in older persons and provides health professionals with appropriate weight-management guidelines for obese older patients. The current data show that weight-loss therapy improves physical function, quality of life, and the medical complications associated with obesity in older persons. Therefore, weight-loss therapy that minimizes muscle and bone losses is recommended for older persons who are obese and who have functional impairments or medical complications that can benefit from weight loss.

  8. Technical management plan for sample generation, analysis, and data review for Phase 2 of the Clinch River Environmental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, C.C.; Benson, S.B. [Oak Ridge National Lab., TN (United States); Beeler, D.A. [Peer Consultants, Inc., Oak Ridge, TN (United States)] [and others

    1994-03-01

    The Clinch River Remedial Investigation (CRRI) is designed to address the transport, fate, and distribution of waterborne contaminants (radionuclides, metals, and organic compounds) released from the US Department of Energy`s (DOE`s) Oak Ridge Reservation (ORR) and to assess potential risks to human health and the environment associated with these contaminants. The remedial investigation is entering Phase 2, which has the following items as its objectives: define the nature and extent of the contamination in areas downstream from the DOE ORR, evaluate the human health and ecological risks posed by these contaminants, and perform preliminary identification and evaluation of potential remediation alternatives. This plan describes the requirements, responsibilities, and roles of personnel during sampling, analysis, and data review for the Clinch River Environmental Restoration Program (CR-ERP). The purpose of the plan is to formalize the process for obtaining analytical services, tracking sampling and analysis documentation, and assessing the overall quality of the CR-ERP data collection program to ensure that it will provide the necessary building blocks for the program decision-making process.

  9. Sub-marine groundwater for the supply of drinking water. A review of the hydro-geological potential and its technical and economical feasibility.

    Science.gov (United States)

    Haakon Bakken, Tor; Mangset, Lars Erik

    2010-05-01

    assumptions as Zhou and Tol (2005), it is found that utilisation of sub-marine groundwater can be economically competitive. The calculation gives an expected unit cost of 1,23 US /m3. Performed Monte Carlo-simulations give 5 % and 95 % percentiles equal to the unit cost levels 1,07 and 1,39 US /m3, respectively. This is not far from the proposed feasibility benchmark of 1,14 US /m3 by Zhou and Tol (2005), or the average costs of 1,46 US /m3 derived from their large database of built desalination plants (based on reverse osmosis-technology). The dominating cost driver is considered being the salinity of the sub-marine groundwater, affecting the need for water treatment and consequently energy consumption. Hence it is concluded that a premise for the proposed technical concept is that the sub-marine groundwater holds sufficiently better quality (lower salinity) than the ambient sea water to justify the additional costs related to exploration and exploitation of the sub-marine water resource (i.e. the additional off-shore oil & gas technologies). A review of publications mainly from the US, supported by a limited number of publications originating from European research groups, were all positive in their conclusions that fresh and brackish water can be found on the continental shelf. These indications may therefore suggest that sub-marine groundwater may be a realistic alternative to desalination of sea water, seen from an economic point of view. Lower energy consumption related to treatment of less saline sub-marine groundwater moreover implies that environmental benefits, assuming the use of fossil fuels as energy source to water desalination, may be achieved.

  10. Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability

    KAUST Repository

    Ghaffour, Noreddine

    2013-01-01

    Desalination capacity has rapidly increased in the last decade because of the increase in water demand and a significant reduction in desalination cost as a result of significant technological advances, especially in the reverse osmosis process. The cost of desalinated seawater has fallen below US$0.50/m3 for a large scale seawater reverse osmosis plant at a specific location and conditions while in other locations the cost is 50% higher (US$1.00/m3) for a similar facility. In addition to capital and operating costs, other parameters such as local incentives or subsidies may also contribute to the large difference in desalted water cost between regions and facilities. Plant suppliers and consultants have their own cost calculation methodologies, but they are confidential and provide water costs with different accuracies. The few existing costing methodologies and software packages such as WTCost© and DEEP provide an estimated cost with different accuracies and their applications are limited to specific conditions. Most of the available cost estimation tools are of the black box type, which provide few details concerning the parameters and methodologies applied for local conditions. Many desalination plants built recently have greater desalinated water delivery costs caused by special circumstances, such as plant remediation or upgrades, local variation in energy costs, and site-specific issues in raw materials costs (e.g., tariffs and transportation). Therefore, the availability of a more transparent and unique methodology for estimating the cost will help in selecting an appropriate desalination technology suitable for specific locations with consideration of all the parameters influencing the cost. A techno-economic evaluation and review of the costing aspects and the main parameters influencing the total water cost produced by different desalination technologies are herein presented in detail. Some recent developments, such as the increase of unit capacity

  11. Green Technical Methods for Treatment of Waste Water Using Microalgae and its Application in the Management of Natural Water Resources –A Review

    Directory of Open Access Journals (Sweden)

    Sapna N. Nandeshwar

    2014-12-01

    Full Text Available Water covers 71% of the Earth's surface, and is vital for all known forms of life.But only 2.5% of the Earth's water is freshwater. Due to industrialization and Urbanization it is becoming more polluted and risk of this polluted water consumption and its sanitation problem is increasing day to day in most of the developing countries, so it has become anessential need for today’s environment to protect water from getting polluted or develop its cost effective remedial method for its protection. Literature survey was done to find out the new, low-cost waste water treatment methods in which we had found that Microalgae has the natural wastewater treatment properties. It has the self cleansing power due to which it abstracts Nitrate 99%, sulphate 84% and Phosphate 73% for its growth and development. During their growth they trap sun light and CO2 from the environment for their photosynthesis. In the mean time of review of literature we had found that waste water treatment using microalgae has number of positive applications over the conventional methods as it is useful in Wastewater treatment, CO2 sequestration, Cost effective, Sanitation and also in the production of renewable sources of energy such as Biodiesel, Biofuel, Glycerol, Methane gas, Hydrogen gas, Biofertilizers etc. The overall review has concluded that this Green technical method for treatment of municipal waste water using microalgae should be applied in all developing and developed countries for wastewater treatment so as to protect the environmental pollution causing due to waste water from industrial and Societies effluents.

  12. 鱼油的提取方法及精制工艺探讨%Review on Extraction Methods and Refining Technics of Fish Oil

    Institute of Scientific and Technical Information of China (English)

    王海磊; 罗庆华; 黄美娥

    2012-01-01

    The development and the utilization of fish oil have become a research hot spot in China and foreign country in recent years, and fish oil has been widely used in food, medicine, feed, chemical and other industries. The extraction methods, the refining technics and the latest development of fish oil were reviewed, and the potential problems were analyzed in order to provide valuable information for the optimization of extraction technology and the development of new technology of fish oil.%鱼油产品的开发利用已成为国内外研究的热点,被广泛应用于食品、医药、饲料、化工等行业.主要阐述了鱼油的提取方法、精制工艺及最新的研究动态,分析了发展过程中存在的问题,以期为鱼油提取技术的优化及新技术的研发提供参考.

  13. Independent technical review and analysis of hydraulic modeling and hydrology under low-flow conditions of the Des Plaines River near Riverside, Illinois

    Science.gov (United States)

    Over, Thomas M.; Straub, Timothy D.; Hortness, Jon E.; Murphy, Elizabeth A.

    2012-01-01

    The U.S. Geological Survey (USGS) has operated a streamgage and published daily flows for the Des Plaines River at Riverside since Oct. 1, 1943. A HEC-RAS model has been developed to estimate the effect of the removal of Hofmann Dam near the gage on low-flow elevations in the reach approximately 3 miles upstream from the dam. The Village of Riverside, the Illinois Department of Natural Resources-Office of Water Resources (IDNR-OWR), and the U. S. Army Corps of Engineers-Chicago District (USACE-Chicago) are interested in verifying the performance of the HEC-RAS model for specific low-flow conditions, and obtaining an estimate of selected daily flow quantiles and other low-flow statistics for a selected period of record that best represents current hydrologic conditions. Because the USGS publishes streamflow records for the Des Plaines River system and provides unbiased analyses of flows and stream hydraulic characteristics, the USGS served as an Independent Technical Reviewer (ITR) for this study.

  14. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  15. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    , this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references......The actors of the building industry have access to a range of Information and Communication Technologies (ICTs), and are constantly presented with new software and new communications platforms. Through case studies, and inspired by sociotechnical approaches to the study of emerging technologies...... to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role...

  16. Technical Assistance to Developers

    Energy Technology Data Exchange (ETDEWEB)

    Rockward, Tommy [Los Alamos National Laboratory; Borup, Rodney L. [Los Alamos National Laboratory; Garzon, Fernando H. [Los Alamos National Laboratory; Mukundan, Rangachary [Los Alamos National Laboratory; Spernjak, Dusan [Los Alamos National Laboratory

    2012-07-17

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  18. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  19. Health effects associated with short-term exposure to low levels of hydrogen sulphide (H{sub 2}S): A technical review

    Energy Technology Data Exchange (ETDEWEB)

    Davies, D. B. [Cantox Environmental Inc., Calgary, AB (Canada)

    2002-10-01

    A comprehensive review of the health effects information currently available for hydrogen sulphide was commissioned by Alberta Health and Wellness in response to a recommendation of the provincial Advisory Committee on Public Safety and Sour Gas. The focus of the review was to be on the health effects of acute or short-term exposure to hydrogen sulphide, focusing on extant full-length, primary scientific papers describing original work. The review was conducted under the auspices of an Expert Panel, with members drawn from government, industry and other stakeholders. Studies were identified by means of a staged search strategy, with primary reliance placed on electronic databases accessed through the DIALOG Information Retrieval Service. Forty-five studies have been identified as meeting the criteria laid out in the Terms of Reference. Each of the 45 papers were subjected to an independent review by two members of the consultant's team, followed by a critical review of the findings from each study, and assessment of the toxicological significance and clinical relevance of any observed responses. Fifty per cent of the studies were rated of being of 'low' technical quality on the basis of weaknesses such as failure to follow conventional testing protocols; use of single exposure concentration only; use of single sex only; use of too few test subjects; lack of routine measures of toxicity; or inadequate description of exposure conditions. In addition, many of the studies were devoted to understanding the mechanism of action of hydrogen sulphide at the cellular level rather than health effects per se. Health effects information revealed no deaths in any of the clinical or case-control studies reviewed, no subjective complaints by young, healthy male and female subjects to hydrogen sulphide up to 10 ppm for 15-20 minutes, only one complaint of eye irritation, no airway symptoms nor changes in pulmonary function reported in clinical studies involving

  20. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  1. Technical Review Report for the Model 9978-96 Package Safety Analysis Report for Packaging (S-SARP-G-00002, Revision 1, March 2009)

    Energy Technology Data Exchange (ETDEWEB)

    West, M

    2009-03-06

    This Technical Review Report (TRR) documents the review, performed by Lawrence Livermore National Laboratory (LLNL) Staff, at the request of the Department of Energy (DOE), on the 'Safety Analysis Report for Packaging (SARP), Model 9978 B(M)F-96', Revision 1, March 2009 (S-SARP-G-00002). The Model 9978 Package complies with 10 CFR 71, and with 'Regulations for the Safe Transport of Radioactive Material-1996 Edition (As Amended, 2000)-Safety Requirements', International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1. The Model 9978 Packaging is designed, analyzed, fabricated, and tested in accordance with Section III of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (ASME B&PVC). The review presented in this TRR was performed using the methods outlined in Revision 3 of the DOE's 'Packaging Review Guide (PRG) for Reviewing Safety Analysis Reports for Packages'. The format of the SARP follows that specified in Revision 2 of the Nuclear Regulatory Commission's Regulatory Guide 7.9, i.e., 'Standard Format and Content of Part 71 Applications for Approval of Packages for Radioactive Material'. Although the two documents are similar in their content, they are not identical. Formatting differences have been noted in this TRR, where appropriate. The Model 9978 Packaging is a single containment package, using a 5-inch containment vessel (5CV). It uses a nominal 35-gallon drum package design. In comparison, the Model 9977 Packaging uses a 6-inch containment vessel (6CV). The Model 9977 and Model 9978 Packagings were developed concurrently, and they were referred to as the General Purpose Fissile Material Package, Version 1 (GPFP). Both packagings use General Plastics FR-3716 polyurethane foam as insulation and as impact limiters. The 5CV is used as the Primary Containment Vessel (PCV) in the Model 9975-96 Packaging. The Model 9975-96 Packaging also has the 6CV as its Secondary

  2. Sandia Combustion Research: Technical review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This report contains reports from research programs conducted at the Sandia Combustion Research Facility. Research is presented under the following topics: laser based diagnostics; combustion chemistry; reacting flow; combustion in engines and commercial burners; coal combustion; and industrial processing. Individual projects were processed separately for entry onto the DOE databases.

  3. Alcohol fuels program technical review

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-07-01

    The last issue of the Alcohol Fuels Process R/D Newsletter contained a work breakdown structure (WBS) of the SERI Alcohol Fuels Program that stressed the subcontracted portion of the program and discussed the SERI biotechnology in-house program. This issue shows the WBS for the in-house programs and contains highlights for the remaining in-house tasks, that is, methanol production research, alcohol utilization research, and membrane research. The methanol production research activity consists of two elements: development of a pressurized oxygen gasifier and synthesis of catalytic materials to more efficiently convert synthesis gas to methanol and higher alcohols. A report is included (Finegold et al. 1981) that details the experimental apparatus and recent results obtained from the gasifier. The catalysis research is principally directed toward producing novel organometallic compounds for use as a homogeneous catalyst. The utilization research is directed toward the development of novel engine systems that use pure alcohol for fuel. Reforming methanol and ethanol catalytically to produce H/sub 2/ and CO gas for use as a fuel offers performance and efficiency advantages over burning alcohol directly as fuel in an engine. An application of this approach is also detailed at the end of this section. Another area of utilization is the use of fuel cells in transportation. In-house researchers investigating alternate electrolyte systems are exploring the direct and indirect use of alcohols in fuel cells. A workshop is being organized to explore potential applications of fuel cells in the transportation sector. The membrane research group is equipping to evaluate alcohol/water separation membranes and is also establishing cost estimation and energy utilization figures for use in alcohol plant design.

  4. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  5. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  6. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  7. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  8. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  9. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  10. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  11. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  12. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  13. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  14. Marketing information: The technical report as product

    Science.gov (United States)

    Stoher, F. F.; Pinelli, T. E.

    1981-01-01

    Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

  15. Review of Chemical, Biological, Radiological, and Nuclear (CBRN) Terminology in Technical Guide 316 (TG 316) and Allied Medical Publication 8(C) (AMedP-8(C))

    Science.gov (United States)

    2013-05-01

    Guide 316 Supplement G1: Preliminary biological military exposure guidelines for aerosolized Staphylococcal Enterotoxin B (SEB), (Aberdeen Proving...Phase I preliminary BMEGs are completed for anthrax, plague, tularemia, ricin, and Staphylococcal Enterotoxin B (SEB). The Phase II process has been...USAPHC. Technical Guide 316 Supplement G1: Preliminary biological military exposure guidelines for aerosolized Staphylococcal Enterotoxin B (SEB

  16. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  18. Reviews

    Science.gov (United States)

    2004-03-01

    WEB WATCH (204) Try unearthing some interesting information about archaeology BOOK REVIEWS (206) Teaching and assessing practical skills Book Review: Learn to drive with Sir Isaac Newton DVD REVIEW (207) Bring some sunshine into the classroom EQUIPMENT REVIEWS (208) Robust air puck takes a kicking Flowlog offers sensing options plus multimode datalogging Mastering Chladni figures takes practice but it offers surprises

  19. The Positive Impact of Social and Emotional Learning for Kindergarten to Eighth-Grade Students: Findings from Three Scientific Reviews. Technical Report

    Science.gov (United States)

    Payton, John; Weissberg, Roger P.; Durlak, Joseph A.; Dymnicki, Allison B.; Taylor, Rebecca D.; Schellinger, Kriston B.; Pachan, Molly

    2008-01-01

    This report summarizes results from three large-scale reviews of research on the impact of social and emotional learning (SEL) programs on elementary and middle-school students--that is, programs that seek to promote various social and emotional skills. Collectively the three reviews included 317 studies and involved 324,303 children. SEL programs…

  20. Modern trends in technical crystallization

    Science.gov (United States)

    Matz, G.

    1980-04-01

    Interesting and significant developments have occurred in the last decade in both crystallization equipment and in the theory of crystallization process. In the field of technical crystallization new crystallizers have been developed and computer modelling has become important in scaling up and in the achievement of increased performance. The DP-Kristaller developed by Escher-Wyss-Tsukishima, the Brodie purifier, the sieve tray column having dancing balls, the automated multiple crystallization process due to Mützenberg and Saxer and the double belt cooler, all of which represent technical developments, are described in the first section. The second part of the paper reviews computer modelling of the fluidized bed crystallizer, chemical precipitation, flaking and prilling. Finally, there is a brief discussion of the impact of technical crystallization processes on environmental protection.

  1. Tracing Graduates through Reunion Parties: Secondary Technical Education in Mozambique.

    Science.gov (United States)

    Ziderman, Adrian

    1997-01-01

    A review of enrollments, graduates, and costs for Mozambique secondary technical schools and the results of a follow-up employment survey conducted at graduate reunion parties indicate low internal and external efficiency and high unit costs in the technical education system, particularly "basic" technical schools. Three possible types…

  2. 48 CFR 952.242-70 - Technical direction.

    Science.gov (United States)

    2010-10-01

    ... that assists in interpreting drawings, specifications, or technical portions of the work description. (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction....

  3. Review of the geological and structural setting near the site of the proposed Transuranic Waste Facility (TRUWF) Technical Area 52 (TA-52), Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Schultz-Fellenz, Emily S.; Gardner, Jamie N.

    2007-10-01

    Because of Los Alamos National Laboratory’s proximal location to active geologic structures, assessment of seismic hazards, including the potential for seismic surface rupture, must occur before construction of any facilities housing nuclear or other hazardous materials. A transuranic waste facility (TRUWF) planned for construction at Technical Area 52 (TA-52) provides the impetus for this report. Although no single seismic hazards field investigation has focused specifically on TA-52, numerous studies at technical areas surrounding TA-52 have shown no significant, laterally continuous faults exhibiting activity in the last 10 ka within 3,000 ft of the proposed facility. A site-specific field study at the footprint of the proposed TRUWF would not yield further high-precision data on possible Holocene faulting at the site because post-Bandelier Tuff sediments are lacking and the shallowest subunit contacts of the Bandelier Tuff are gradational. Given the distal location of the proposed TRUWF to any mapped structures with demonstrable Holocene displacement, surface rupture potential appears minimal at TA-52.

  4. Review

    OpenAIRE

    Ham,, Raymond Van Der

    1989-01-01

    The aim of this book is stated as “to introduce the minute and mysterious world of pollen to as many readers as possible” and “to re-establish the morphological study of pollen taking into account newly accumulated phylogenetic information”. It provides introductory accounts on ontogeny, pollen morphology, pollination, pollen physiology, genetics of pollen, airborne pollen and pollinosis, and pollen analysis. Technically speaking it is a well-produced book, being bound in hard covers and neat...

  5. Pathophysiology of combined radiation injuries: A review and analysis of the literature on non-human research. Technical report, 28 Sep 88-1 Jan 90

    Energy Technology Data Exchange (ETDEWEB)

    Baum, S.J.

    1991-07-01

    One hundred and seventy one references applicable to determining the effect of tactical nuclear weapons on military personnel have been reviewed, and the significant conclusions are reported. The study reviews the scientific literature and focuses on animal experiments published from 1933 to the present time, including a number of German studies and some Soviet research not previously reviewed in English language publications. Recurring themes of the review are the synergistic increase in mortality when injury (burn, wound, bleeding, fracture, etc.) follows irradiation and the reduction in mortality when injury precedes irradiation and/or when antibiotics are administered. The synergistic increases are attributed to radiation damage to the bone marrow precursor cells, which reduces the protective mechanisms (leukopenia) and permits easier onset of bacteremia and septicemia. Radiation, in addition to favoring infection, is also found to prolong and complicate the normal healing processes. The addition of burns or wounds shortens the latent period and results in earlier onset of the manifest illness phase.

  6. Teams Are Now Used by Many Technical Services Departments in Academic Libraries. A Review of: Zhu, L. (2011. Use of teams in technical services in academic libraries. Library Collections, Acquisitions, & Technical Services 35, 69-82. doi:10.1016/j.lcats.2011.03.013

    Directory of Open Access Journals (Sweden)

    Kirsty Thomson

    2012-06-01

    Full Text Available Objective – An investigation of the use ofteams in technical services, provision oftraining on team-working, characteristics oftechnical services teams, and the effectivenessof teams.Design – Survey comprising of 19 closedquestions and one open question.Setting – Technical services departments inacademic libraries.Subjects– Responses were received from 322library staff members. Of those, 294 answeredthe survey question about team-basedtechnical services and 55.9% of respondentscompleted the full survey.Methods – An online survey was promotedvia seven technical services electronic mail listsand was conducted using SurveyMonkey.Main Results – The survey found that 39% oftechnical services were entirely team-based,18% were partly team-based, and 43% did notuse teams. Information was gathered about thenumber of teams, team nomenclature, andhow long teams have been used. This researchhighlighted the lack of provision of trainingand documentation about working in teams.Conclusion – Many respondents have team-basedtechnical services, and most participantsfound that working in teams had a positiveimpact. A systematic application of this surveyis planned for the future.

  7. Review of technical justification of assumptions and methods used by the Environmental Protection Agency for estimating risks avoided by implementing MCLs for radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Morris, S.C.; Rowe, M.D.; Holtzman, S.; Meinhold, A.F.

    1992-11-01

    The Environmental Protection Agency (EPA) has proposed regulations for allowable levels of radioactive material in drinking water (40 CFR Part 141, 56 FR 33050, July 18, 1991). This review examined the assumptions and methods used by EPA in calculating risks that would be avoided by implementing the proposed Maximum Contaminant Levels for uranium, radium, and radon. Proposed limits on gross alpha and beta-gamma emitters were not included in this review.

  8. Technical Report - FINAL

    Energy Technology Data Exchange (ETDEWEB)

    Barbara Luke, Director, UNLV Engineering Geophysics Laboratory

    2007-04-25

    Improve understanding of the earthquake hazard in the Las Vegas Valley and to assess the state of preparedness of the area's population and structures for the next big earthquake. 1. Enhance the seismic monitoring network in the Las Vegas Valley 2. Improve understanding of deep basin structure through active-source seismic refraction and reflection testing 3. Improve understanding of dynamic response of shallow sediments through seismic testing and correlations with lithology 4. Develop credible earthquake scenarios by laboratory and field studies, literature review and analyses 5. Refine ground motion expectations around the Las Vegas Valley through simulations 6. Assess current building standards in light of improved understanding of hazards 7. Perform risk assessment for structures and infrastructures, with emphasis on lifelines and critical structures 8. Encourage and facilitate broad and open technical interchange regarding earthquake safety in southern Nevada and efforts to inform citizens of earthquake hazards and mitigation opportunities

  9. Review of state-of-the-art of solar collector corrosion processes. Task 1 of solar collector studies for solar heating and cooling applications. Final technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, J E; Diegle, R B

    1980-04-11

    The state-of-the-art of solar collector corrosion processes is reviewed, and Task 1 of a current research program on use of aqueous heat transfer fluids for solar heating and cooling is summarized. The review of available published literature has indicated that lack of quantitative information exists relative to collector corrosion at the present time, particularly for the higher temperature applications of solar heating and cooling compared to domestic water heating. Solar collector systems are reviewed from the corrosion/service life viewpoint, with emphasis on various applications, collector design, heat transfer fluids, and freeze protection methods. Available information (mostly qualitative) on collector corrosion technology is reviewed to indicate potential corrosion problem areas and corrosion prevention practices. Sources of limited quantitative data that are reviewed are current solar applications, research programs on collector corrosion, and pertinent experience in related applications of automotive cooling and non-solar heating and cooling. A data bank was developed to catalog corrosion information. Appendix A of this report is a bibliography of the data bank, with abstracts reproduced from presently available literature accessions (about 220). This report is presented as a descriptive summary of information that is contained in the data bank.

  10. Reviews

    Directory of Open Access Journals (Sweden)

    Philip Barker

    1999-12-01

    Full Text Available For many people, the terms 'multimedia' and 'Internet' are now quite familiar expressions that trigger many different thought patterns and associations. Very often, the associations that we make depend critically upon our backgrounds and prior experiences - particularly within hybrid areas such as multimedia, computing and information technology. Glossaries and dictionaries are therefore useful tools for providing a common level of meaning for the technical terms and jargon that we use in particular subject domains. This particular book offers a guide to the terminology associated with the Internet and multimedia applications.

  11. Total energy cycle assessment of electric and conventional vehicles: an energy and environmental analysis. Volume 4: peer review comments on technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report compares the energy use, oil use and emissions of electric vehicles (EVs) with those of conventional, gasoline-powered vehicles (CVs) over the total life cycle of the vehicles. The various stages included in the vehicles` life cycles include vehicle manufacture, fuel production, and vehicle operation. Disposal is not included. An inventory of the air emissions associated with each stage of the life cycle is estimated. Water pollutants and solid wastes are reported for individual processes, but no comprehensive inventory is developed. Volume IV includes copies of all the external peer review comments on the report distributed for review in July 1997.

  12. How to be an Effective Technical Writer?

    Directory of Open Access Journals (Sweden)

    M Solaiman Ali

    2012-07-01

    Full Text Available Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations. Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical writing for engineers stresses that a successful engineering career requires strong writing skills. Part 2 (How to write the major sections or elements of a report describes the techniques of writing the abstract, introduction, literature review, procedure/methods & materials, results, discussion, conclusion, and recommendations. Part 3 (Special features of technical writing brings into focus some of the special features of technical writing such as tables & graphs in the text, graphics in instructions, team writing, ethics (plagiarism, document sources, three citation styles and IEEE reference style. Part 4 (Technical usage deals with writing abbreviations, initialisms and acronyms, numbers, units of measurement, and equations.Part 5 (Technical style highlights the imperative writing style and other features of technical writing such as the use of active and passive voices, plain vs. complex syntax, avoiding redundant or superfluous expressions, and vague generalities, using words or expressions with visual impact, the past tense to describe experimental work, the present tense to describe hypotheses, principles, theories and truths, and breaking up the text of the report into short sections. Part 6 (Document specifications emphasizes the technical writer’s need to conform to such document specifications as word count, format, font, number of words per line of text imposed. Part 7 (Reader-friendly technical writing suggests choosing the varied writing modes

  13. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  14. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  15. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  16. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  17. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  18. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  19. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  20. Reviews.

    Science.gov (United States)

    Greenleaf, Floyd; And Others

    1986-01-01

    Reviews eight textbooks, readers, and books. Topics include Latin America, colonial America, the Carolinians, women in French textbooks, the Vikings, the Soviet Union, nineteenth-century Black America, and Ernest Rutherford. (TRS)

  1. Reviews.

    Science.gov (United States)

    Science Teacher, 1987

    1987-01-01

    Provides reviews of four computer software packages designed for use in science education. Describes courseware dealing with a variety of tips for teaching physics concepts, chemical reactions in an aqueous solution, mitosis and meiosis, and photosynthesis. (TW)

  2. Review

    African Journals Online (AJOL)

    2016-01-01

    Jan 1, 2016 ... medicine and biology here an attempt has been made to review the synthesis and biological ... insight into the recent applications of Mannich reaction and its ...... Various thermodynamic parameters were also determined to ...

  3. Reviews

    Directory of Open Access Journals (Sweden)

    1990-06-01

    Full Text Available Michael Issacharoff. Discourse as Performance . Stanford: Stanford University Press, 1989. vii + 161 pp. Reviewed by Gerald Prince, University of Pennsylvania Thomas M. Kavanagh, ed. The Limits of Theory . Stanford: Stanford University Press, 1989. 254 pp. Reviewed by André J.M. Prévos, Pennsylvania State University, Worthington Scranton Campus Wendy B. Faris. Labyrinths of Language: Symbolic Landscape and Narrative Design in Modern Fiction . Baltimore and London: The Johns Hopkins Press, 1988. 242 pp. Reviewed by Carol Rigolot, Princeton University Eve Tavor Bannet. Structuralism and the Logic of Dissent: Barthes, Derrida, Foucault, Lacan . Urbana and Chicago: University of Illinois Press, 1989. 299 pp. Reviewed by Andrew J. McKenna, Loyoyla University of Chicago Gary Saul Morson and Caryl Emerson, eds. Rethinking Bakhtin: Extensions and Challenges . Evanston: Northwestern University Press, 1989. Reviewed by Lewis Bagby, University of Wyoming Fernando Moreno. Carlos Fuentes. La mort d'Artemio Cruz: entre le mythe et l'histoire . Paris: Editions Caribeennes, 1989. Reviewed by Susan Levine, Lawrence, Kansas

  4. A review and evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of phase 5. Design and evaluation of STI systems: A selected, annotated bibliography

    Science.gov (United States)

    Pinelli, T. E.; Hinnebusch, P. A.; Jaffe, J. M.

    1981-01-01

    A selected, annotated bibliography of literature citations related to the design and evaluation of STI systems is presented. The use of manual and machine-readable literature searches; the review of numerous books, periodicals reports, and papers; and the selection and annotation of literature citations were required. The bibliography was produced because the information was needed to develop the methodology for the review and evaluation project, and a survey of the literature did not reveal the existence of a single published source of information pertinent to the subject. Approximately 200 citations are classified in four subject areas. The areas include information - general; information systems - design and evaluation, including information products and services; information - use and need; and information - economics.

  5. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...... of technical writing....

  6. Reviews

    Directory of Open Access Journals (Sweden)

    Susi Peacock

    2000-12-01

    Full Text Available Training in information technology (IT is becoming a crucial activity for virtually all organizations - a well-worn cliche. Sadly, however, it is all too often the case that training budgets are manipulated and absorbed into other 'worthy' causes. The result is that IT training is hastily passed onto junior members of a team or to postgraduate students who have had little formal training and experience of IT training. It is for these novice trainers that the '500 computer tips' will be particularly useful but it is also a highly worthwhile, accessible reference for more experienced trainers in both academic and non-academic environments. This book (one of a series of '500 Tips' from Kogan Page does not aim to give technical information about any particular software package but provides readable, understandable generic tips which have a sound pedagogical base (although this is carefully hidden.

  7. Reviews

    Directory of Open Access Journals (Sweden)

    Stephen Richards

    1993-12-01

    Full Text Available Compact Disc Interactive (CD-I is a new electronic publishing medium for multimedia information. Unlike conventional publishing media such as paper and film, CD-I provides an interactive method of accessing stored information and controlling its subsequent display on a TV screen. CD-I revolutionizes the publishing of all sorts of material such as music, text, images, computer graphics, film and video. It also adds many capabilities not possible with traditional publication media. Until recently, however, the only widely available textbook on CD-I was Preston's Compact Disc-Interactive: A Designer's Overview, published in 1988 by Kluwer Technical Books. Now, with the recent release of CD-I in Europe, three new books on the technology have become available. They form part of The CD-I Series produced by Philips Interactive Media Systems (UK and published by the Addison-Wesley. All three have 1992 imprints.

  8. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences....

  9. Teaching Workplace Skills to Technical Communicators

    Directory of Open Access Journals (Sweden)

    Darina M. Slattery

    2013-01-01

    Full Text Available In this article, we introduce two programmes in Technical Communication (one distance, and one on-campus offered by the University of Limerick. Both programmes have been running for several years, but are regularly reviewed to ensure that they remain relevant. We describe how these programmes correspond to industry needs, and how they develop core competencies of technical communicators. We outline two key types of assignment (writing and development, and explain their relevance to the workplace.

  10. Use of technical analysis in FOREX trading

    OpenAIRE

    Vítovec, Josef

    2010-01-01

    The paper reacts to tremendous increase in popularity of FX trading among retail investors in recent years, caused mainly by easy accessibility through numerous online trading platforms and dramatic fall in trading costs. One of the accompanying trends along with increasing trading speed is a departure from fundamental analysis and shift towards more technical approach. In reaction to that, the paper aims to review the most popular technical trading rules and puts the findings in contrast wit...

  11. 當代傳播思潮中的數位素養: 評介Digital Literacy for Technical Com Digital Literacy in Contemporary Communication: A Review of Digital Literacy for Technical Communication: 21st Century Theory and Practice

    Directory of Open Access Journals (Sweden)

    Tzong-Sheng, Deng

    2010-06-01

    Full Text Available The ever-advancing technology has reformed our work environment and also redefined our life styles. The advancement of computer and cyber technology has allowed “digital” jobs and products to infiltrate different aspects of our society, influencing the ways of modern communication as well as the future course of education practices. Comparing with conventional literacy concepts about “reading, writing, listening, and speaking”, “digital literacy” lays more emphasis on the effects and changes caused by a digital context. Based on the standpoints of social constructivism and with experts in communication studies and educators as subjects, this paper reviews the book Digital Literacy for Technical communication: 21st Century Theory and Practice to analyze and discuss key knowledge and abilities required for the future and possible development of related research. Based on the compilation of the book, this review is divided into four parts. The first raises questions about the ontology of “digital literacy”, identifies the scope and meaning of “digital literacy” as defined by Spilkaet al., and confirms the discourse of this review. The second introduces the evolvement of a digital context and describes its three characteristics –authoring, publishing, and management technology – as the preconditions for developing digital literacy. The third discusses the “ fundamental knowledge” for the practice of “digital literacy” and introduces “shaping tools, information design, and content management” as references for communication and education works. The last part concludes the cultural, crosscultural, audience, and ethical perspectives introduced in this book and discusses how to connect “human and technology” for the future development of communication studies and education.

  12. A review of recent method for surface preparation of metal in resin- bonded bridges.Part II: Biomcchamica! and technical considerations

    Directory of Open Access Journals (Sweden)

    Azari A.

    1999-07-01

    Full Text Available After approximately 40 years of experience in the field of resin - bonded restorations (R.B.R,"nthese restorations arc one of the most controversial. During these years, many suggestions have been"nmade for better performance and increasing durability of these restorations. The aims of this paper are:"n1 - Reviewing the literature for the so many factors involving the success or failure of R.B.R."n2 - Introducing a new and simplified method for increasing the durability and /or relention of R.B.R.

  13. Reviews

    OpenAIRE

    Revista alicantina de estudios ingleses

    1995-01-01

    Contiene: M. Carmen África Vidal Claramonte. Traducción, manipulación, desconstrucción. Colección Biblioteca Filológica de Salamanca. Salamanca: Ediciones Colegio de España, 1995 / reviewed by Enrique Alcaraz Varó; Diccionario de uso inglés-español/Spanish-English. Directed by Aquilino Sánchez. Madrid: SGEL, 1993, 450 pp. Diccionario de uso pocket inglés-español/Spanish- English. Directed by Aquilino Sánchez. Madrid: SGEL, 1993, 274 pages / reviewed by Miguel Ángel Campos Pardillo...

  14. Results of a Technical Review of the U.S. Climate Change Technology Program's R&D Portfolio

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Marilyn A [ORNL

    2006-07-01

    The U.S. Climate Change Technology Program (CCTP) is a multi-agency planning and coordinating entity, led by the U.S. Department of Energy that aims to accelerate the development and facilitate the adoption of technologies to address climate change. In late 2005, CCTP asked Oak Ridge National Laboratory and Energetics Incorporated to organize and coordinate a review of the CCTP R&D portfolio using structured workshops. Each workshop focused on one of CCTP's six strategic goals: 1.Reduce emissions from energy end-use and infrastructure 2.Reduce emissions from energy supply 3.Capture and sequester carbon dioxide 4.Reduce emissions of non-CO2 greenhouse gases (GHG) 5.Improve capabilities to measure and monitor GHG emissions 6.Bolster basic science contributions to technology development To promote meaningful dialogue while ensuring broad coverage, a group of broadly experienced professionals with expertise in fields relevant to each CCTP goal were asked to participate in the portfolio reviews and associated workshops. A total of 75 experts participated in the workshops; 60 of these participants represented non-Federal organizations. This report summarizes the findings of the workshops and the results of the Delphi assessment of the CCTP R&D portfolio.

  15. Review of research on smart grid technical standard system%智能电网技术标准体系研究综述

    Institute of Scientific and Technical Information of China (English)

    刘文; 杨慧霞; 祝斌

    2012-01-01

    在推进智能电网建设中,标准制定是重中之重,标准先行对建设好智能电网的意义不言而喻.在对国内外智能电网相关标准梳理的基础上,通过对比国内外建设智能电网差异,并结合我国建设智能电网的重点,从电网结构、设备(系统)以及关键技术路线等三个视角(专业角度)阐述了智能电网标准体系的构架,重点研究了涵盖发电、输电、变电、配电、用电、调度各环节以及通信信息平台的标准体系,包括各专业领域涉及的设备(系统)、现有的或要制定的标准等.随着智能电网的规划和发展,该研究将对我国智能电网标准建设和运行具有规范和指导意义.%In the process of pushing forward the smart grid construction, the standardization is the most important part. The standardization shows its self-evident significance during the smart grid construction. On the basis of combining smart grid-related standards at home and abroad, this paper, by comparing the differences between domestic and foreign smart grid construction, as well as referring to our focus on our smart grid construction, describes the framework of smart grid standard system from three perspectives of the grid structure, equipment system, and key technical line, studies primarily the standard system containing generation, transmission, substation, distribution, consumption, scheduling, and communication and information platform, which also includes various expertise areas related equipments (systems), and the current or to-be-developed standards. With the smart grid planning and development, the study will play a regulated and guide role in the construction and operation of our smart grid standards.

  16. Reviews.

    Science.gov (United States)

    Journal of Chemical Education, 1988

    1988-01-01

    Reviews three computer software packages for chemistry education including "Osmosis and Diffusion" and "E.M.E. Titration Lab" for Apple II and "Simplex-V: An Interactive Computer Program for Experimental Optimization" for IBM PC. Summary ratings include ease of use, content, pedagogic value, student reaction, and…

  17. Reviews

    NARCIS (Netherlands)

    Sleumer, H.; Steenis, van C.G.G.J.

    1966-01-01

    An exhaustive Flora of Delhi, compiled by J. K. Maheshwari, was published by C.S.I.R. in 1963 (for a review see Blumea 13, 1965, p. 174). During the compilation of that flora, 278 line-drawings, illustrating the habits and chief features of the plants found in Delhi, were prepared; they form a welco

  18. Reviews

    NARCIS (Netherlands)

    NN,

    1998-01-01

    BALGOOY, M.M.J, VAN. 1998. Malesian Seed Plants. Volume 2. Portraits of tree families. 307 pp., numerous text figures. Published by Rijksherbarium/Hortus Botanicus, Leiden. ISBN 90-71236-36-6. Paperback. Price: NLG 100.00. This is the second volume of a trilogy [see the review of ‘Spot-characters’ b

  19. Reviews.

    Science.gov (United States)

    Repak, Arthur J.; And Others

    1988-01-01

    Computer software, audiovisuals, and books are reviewed. Includes topics on interfacing, ionic equilibrium, space, the classification system, Acquired Immune Disease Syndrome, evolution, human body processes, energy, pesticides, teaching school, cells, and geological aspects. Availability, price, and a description of each are provided. (RT)

  20. Review

    DEFF Research Database (Denmark)

    Van Den Hazel, H B; Kielland-Brandt, Morten; Winther, Jakob R.

    1996-01-01

    The yeast vacuole, which is equivalent to the lysosome of higher eukaryotes, is one of the best characterized degradative organelles. This review describes the biosynthesis and function of yeast vacuolar proteases. Most of these enzymes are delivered to the vacuole via the early compartments...

  1. Review

    NARCIS (Netherlands)

    Wilde, de W.J.J.O.

    1994-01-01

    This review marks the appearance of Volume II, after the publication of Volume I, Pteridophytes and Gymnosperms, in 1990; several more volumes are expected in the future before completion of the Vascular plants as a whole. The present volume contains 73 families out of some 250-500 families which ca

  2. Reviews

    NARCIS (Netherlands)

    Adema, Frits

    1995-01-01

    This is the second volume of a revision of Tabernaemontana (Apocynaceae). The volume covers the New World species (44) and the genus Stemmadenia (10 species). This part of the revision of Tabernaemontana comes up to the high standards set in the first volume [see the review by Leenhouts, Blumea 38 (

  3. Reviews

    Directory of Open Access Journals (Sweden)

    Wilma D'Ambrosio

    2013-12-01

    Full Text Available In the wake of the great interest raised by Maurizio Gabrieli’s review of the book Musical Networks. Parallel Distributed Perception and Performance (various authors; edited by Niall Griffith and Peter M. Todd, MA: MIT Press, Cambridge, 1999 which appeared in our last issue of Analitica, the present review section no longer follows the format used up to now but offers a survey of texts dedicated to the relationship between music analysis and technology. This decision was also made as a result of the request for more information on the subject by many of our readers. In coming issues we plan to extend this bibliography and comment on at least some of the most interesting texts published in recent years, among which we would immediately like to draw attention to the important work by Baroni, Dalmonte and Jacoboni published in 1999 (Le regole della musica. Indagine sui meccanismi della comunicazione, Torino, I Manuali EDT/SIdM, 1999.

  4. Reviews

    Directory of Open Access Journals (Sweden)

    Philip Barker

    1998-12-01

    Full Text Available There were two copy-editing blunders in Clive Betts's review, in ALT-J 5 (3, of Shirley Fletcher's Designing Competence-Based Training, one in paragraph 2 line 1, the other in paragraph 3 line 8. The errors (the result of the Editor, Gabriel Jacobs, trying to perform a final proof of the journal at lightning speed in order to meet the printing deadline, and not of any mistake on the part of either Philip Barker or the University of Wales Press hardly affected meaning, but the fact that they appeared in a review of a book on competence makes the embarrassment all the more telling. The Editor apologizes, and thanks eagle-eyed readers. He has decided to read the book in the hope that such errors will not recur.

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Stoessel, Chris

    2013-11-13

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  6. 2008 annual merit review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

  7. A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets

    Energy Technology Data Exchange (ETDEWEB)

    Weller, G.H.

    2001-07-15

    Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

  8. A technical review of non-destructive assay research for the characterization of spent nuclear fuel assemblies being conducted under the US DOE NGSI

    Energy Technology Data Exchange (ETDEWEB)

    Croft, Stephen [Los Alamos National Laboratory; Tobin, Stephen J [Los Alamos National Laboratory

    2010-12-06

    There is a growing belief that expansion of nuclear energy generation will be needed in the coming decades as part of a mixed supply chain to meet global energy demand. At stake is the health of the economic engine that delivers human prosperity. As a consequence renewed interest is being paid to the safe management of spent nuclear fuel (SNF) and the plutonium it contains. In addition to being an economically valuable resource because it can be used to construct explosive devices, Pu must be placed on an inventory and handled securely. A multiinstitutional team of diverse specialists has been assembled under a project funded by the US Department of Energy (DOE) Next Generation Safeguards Initiative (NGSI) to address ways to nondestructively quantify the plutonium content of spent nuclear fuel assemblies, and to also detect the potential diversion of pins from those assemblies. Studies are underway using mostly Monte Carlo tools to assess the feasibility, individual and collective performance capability of some fourteen nondestructive assay methods. Some of the methods are familiar but are being applied in a new way against a challenging target which is being represented with a higher degree of realism in simulation space than has been done before, while other methods are novel. In this work we provide a brief review of the techniques being studied and highlight the main achievements to date. We also draw attention to the deficiencies identified in for example modeling capability and available basic nuclear data. We conclude that this is an exciting time to be working in the NDA field and that much work, both fundamental and applied, remains ahead if we are to advance the state of the practice to meet the challenges posed to domestic and international safeguards by the expansion of nuclear energy together with the emergence of alternative fuel cycles.

  9. Reviews

    Directory of Open Access Journals (Sweden)

    Philip Barker

    1997-12-01

    Full Text Available For a variety of different reasons, increasing use is now being made of the Internet for the delivery of course materials and/or for the support of teaching and learning activities. The details of the mechanisms used will obviously vary from one situation to another, depending upon the types of problem to be addressed. These may involve mentoring, teaching, monitoring, recording, tutoring, assessing, and so on. In this book, the author attempts to review the educational and administrative considerations of offering courses, course materials or course delivery via the Internet.

  10. The international linear collider. Technical design report. Vol. 1. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Behnke, Ties; Brau, James E.; Foster, Brian; Fuster, Juan; Harrison, Mike; McEwan Paterson, James; Peskin, Michael; Stanitzki, Marcel; Walker, Nicholas; Yamamoto, Hitoshi (eds.)

    2013-07-01

    A review is given about the planned International Linear Collider. Especially described are the technical design, the accelerator layout and design, the R and D during the technical design phase, and the detectors. (HSI)

  11. The European Society of Therapeutic Radiology and Oncology-European Institute of Radiotherapy (ESTRO-EIR) report on 3D CT-based in-room image guidance systems: a practical and technical review and guide.

    Science.gov (United States)

    Korreman, Stine; Rasch, Coen; McNair, Helen; Verellen, Dirk; Oelfke, Uwe; Maingon, Philippe; Mijnheer, Ben; Khoo, Vincent

    2010-02-01

    The past decade has provided many technological advances in radiotherapy. The European Institute of Radiotherapy (EIR) was established by the European Society of Therapeutic Radiology and Oncology (ESTRO) to provide current consensus statement with evidence-based and pragmatic guidelines on topics of practical relevance for radiation oncology. This report focuses primarily on 3D CT-based in-room image guidance (3DCT-IGRT) systems. It will provide an overview and current standing of 3DCT-IGRT systems addressing the rationale, objectives, principles, applications, and process pathways, both clinical and technical for treatment delivery and quality assurance. These are reviewed for four categories of solutions; kV CT and kV CBCT (cone-beam CT) as well as MV CT and MV CBCT. It will also provide a framework and checklist to consider the capability and functionality of these systems as well as the resources needed for implementation. Two different but typical clinical cases (tonsillar and prostate cancer) using 3DCT-IGRT are illustrated with workflow processes via feedback questionnaires from several large clinical centres currently utilizing these systems. The feedback from these clinical centres demonstrates a wide variability based on local practices. This report whilst comprehensive is not exhaustive as this area of development remains a very active field for research and development. However, it should serve as a practical guide and framework for all professional groups within the field, focussed on clinicians, physicists and radiation therapy technologists interested in IGRT.

  12. REVIEW

    Directory of Open Access Journals (Sweden)

    N. F. Bugay

    2016-01-01

    Full Text Available Review of Study Guide: «KUBAN STUDIES. KUBAN IN THE XX CENTURY – THE BEGINNING OF THE XXI CENTURY. HISTORY. PEOPLE SOCIETY.» Study Guide (electronic version to grade 11 of educational institutions. A.A. Zaitsev, E.V. Morozova, N.V. Plotichkina and O.A. Borisko, M.A. Egupova, A.B. Sazantovich, I.S. Bashkakov, T.I. Belyaeva. Krasnodar: Perspectives on Education, 2015.In a review of a thorough analysis of all the component parts of the book that will surely attract the attention first of all history teachers and students in 11 classes of educational institutions of the region. A comprehensive presentation of the material significantly adds to the course of modern history of Russia and enrich its specific material about the life of the Russian Cossacks and as part of the – of the Kuban Cossacks. Along with the reference materials of pure nature that is needed for this kind of research are presented and informative sections on the socio-economic condition of the region, the interests of different strata of the population, the multinational factor and the religious beliefs of the population. Cossacks in its warlike mentality, and this trait is passed from generation to generation. But the aspirations of the Cossacks in this respect are transparent – protecting the integrity of the Fatherland, faithful service to him, boundless devotion to the Orthodox faith. The important story is linked with the identity of the Russian Cossacks, its mentality, "Kuban" specificity, especially for the rule on different sections of history, to various of its exponents, both military and civilians. As is known from the Cossacks received a development institute of judging for each Ataman smoking, working village judge. Cossacks series comply with the law as applied his own family, and chic plan – in the state, fought against offenders, it is considered in relation to the Cossacks and representatives of different ethnic communities living with the Cossacks, and

  13. Recreational technical diving part 2: decompression from deep technical dives.

    Science.gov (United States)

    Doolette, David J; Mitchell, Simon J

    2013-06-01

    Technical divers perform deep, mixed-gas 'bounce' dives, which are inherently inefficient because even a short duration at the target depth results in lengthy decompression. Technical divers use decompression schedules generated from modified versions of decompression algorithms originally developed for other types of diving. Many modifications ostensibly produce shorter and/or safer decompression, but have generally been driven by anecdote. Scientific evidence relevant to many of these modifications exists, but is often difficult to locate. This review assembles and examines scientific evidence relevant to technical diving decompression practice. There is a widespread belief that bubble algorithms, which redistribute decompression in favour of deeper decompression stops, are more efficient than traditional, shallow-stop, gas-content algorithms, but recent laboratory data support the opposite view. It seems unlikely that switches from helium- to nitrogen-based breathing gases during ascent will accelerate decompression from typical technical bounce dives. However, there is evidence for a higher prevalence of neurological decompression sickness (DCS) after dives conducted breathing only helium-oxygen than those with nitrogen-oxygen. There is also weak evidence suggesting less neurological DCS occurs if helium-oxygen breathing gas is switched to air during decompression than if no switch is made. On the other hand, helium-to-nitrogen breathing gas switches are implicated in the development of inner-ear DCS arising during decompression. Inner-ear DCS is difficult to predict, but strategies to minimize the risk include adequate initial decompression, delaying helium-to-nitrogen switches until relatively shallow, and the use of the maximum safe fraction of inspired oxygen during decompression.

  14. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  15. Technical Communication in Japan

    Institute of Scientific and Technical Information of China (English)

    Hiraku Amemiya

    2010-01-01

    @@ 1.Characteristics of Japanese Technical Communication(TC) The visual orientation of information characterizes Japanese technical communication.Manuals that have won Japan Manual Awards in the past have employed various designs with graphical presentations that evoke the style of popular magazines.

  16. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  17. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  18. Technical Program, 1974,

    Science.gov (United States)

    proposed AGARD Technical Program and Budget for 1974. The report reflects the program that was unanimously approved by the AGARD National Delegates Board...required to support the proposed 1974 AGARD technical program is presented in Section 3. The separate publications summary shown in Section 4 identifies by

  19. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic......) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  20. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  1. Technical Writing in the Netherlands.

    Science.gov (United States)

    de Vet, Dominique M. W.

    1996-01-01

    Discusses the technical writing profession in the Netherlands. Bases the discussion on two studies--one directed at technical freelancers and another directed at technical writers working within organizations. Gives a profile of technical writers in the Netherlands; an impression of the problems technical writers in organizations deal with;…

  2. 广东省医用高压氧治疗技术审核与问题探讨%Technical review and evaluation of hyperbaric oxygen treatment in Guangdong and a discussion on the current problems

    Institute of Scientific and Technical Information of China (English)

    李虹; 欧阳明; 邱森玲; 邓国娜

    2014-01-01

    目的 对广东省95家医院申报的医用高压氧治疗技术进行临床应用能力审核及分级.方法 采用回顾性调查法和专家审核法.结果 95家医院中能力达到A级3家、B级37家、C级52家、D级3家.主要存在医疗文书记录不全、版本不统一、材料提交不完整;从业人员培训、设备及技术管理不完善;基层医院高压氧技术临床应用能力普遍较低等问题.结论 健全高压氧治疗技术和设备安全管理制度;制定我省医用高压氧临床诊疗指南、统一技术操作规程及医疗文书模板是保障医疗质量的关键;基层从业医务人员定期参加技术培训、行业学会及审核专家传帮扶带是规范、提高该技术临床应用的有效举措;完整填写和提交申请内容与材料是技术审、等级/能力评估的基础.%Objective To review and evaluate clinical ability and degrading of hyperbaric oxygen (HBO) treatment in 95 hospitals of Guangdong Province.Methods Retrospective survey and expert review methods were used in the study.Results With regard to clinical treatment capacity,the 95 hospitals could be divided into four grades:i.e.grade A (3 hospitals),grade B (37 hospitals),grade C (52 hospitals),grade D (3 hospitals).Current problems existed are:incomplete medical documentation,application of different editions,submission of incomplete materials,irregular training of professional workers,imperfect equipment and technology management,lower capability of basic hospitals in clinical application of HBO therapy.Conclusions The perfection of safety system for the management of HBO techniques and facilities is a fundamental guarantee for the conduction of HBO therapy.The development of guidelines for clinical application of HBO therapy and the unification of operating procedures and editions of medical documentation are key to the assurance of medical treatment quality.Regular technical training of medical professionals,passing on experience

  3. DTIC: Your Key to Defense Technical Information

    Science.gov (United States)

    2008-11-18

    DTIC TR Collection (Only one click away) Public Technical Reports (TRs) (Simple, Quick, Guided Advanced Searches) Search Results: Citations and Links...Registration ( one click away) http://www.dtic.mil Review Eligibility; Click on Web-based Application If eligible, proceed with DTIC’s online

  4. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Juan Camilo Serrano

    2011-12-16

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  5. The Federal Technical Report Literature: Research Needs and Issues.

    Science.gov (United States)

    McClure, Charles R.

    1988-01-01

    Reviews the research on the role, importance, and impact of the federal technical report literature, and summarizes some ambiguities and gaps in the research. Different approaches to conceptual and methodological issues are discussed, and a typology of technical reports is provided. (38 notes with references) (Author/CLB)

  6. Technical Communicator: A New Model for the Electronic Resources Librarian?

    Science.gov (United States)

    Hulseberg, Anna

    2016-01-01

    This article explores whether technical communicator is a useful model for electronic resources (ER) librarians. The fields of ER librarianship and technical communication (TC) originated and continue to develop in relation to evolving technologies. A review of the literature reveals four common themes for ER librarianship and TC. While the…

  7. Milestones for National Technical

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The first session of National Technical Committee of Auto Standardization was established onApri128,1988. The first session of National Technical Committee of Auto Standardization (SAC/TC 114)was established in Beijing on April 28,1988,under the approval of the National Bureau of Standards at that time,with the official from China Association of Automobile Manufacturers as its director.It played a very impoorant role,not only in the unified management of auto standards but also in the technical work of the management of auto products.

  8. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee.

  9. Allison engine ATS program technical review

    Energy Technology Data Exchange (ETDEWEB)

    Mukavetz, D. [Allison Engine Co., Indianpolis, IN (United States)

    1995-10-01

    Gas turbines in industrial and utility applications can help meet future national and worldwide power generation requirements. Turbine systems burning natural gas offer environmentally sound and economical power generation and cogeneration. Since U.S. demand alone will require up to 15 gigawatts per year of new and replacement capacity after the year 2000, the availability of Advanced Turbine Systems (ATS) to fill a share of this need will save significant amounts of fuel and benefit the environment. Implementation of the ATS Program will also keep U.S. manufacturers on the cutting ledge of turbine technology for power generation applications and enhance the nation`s economic competitiveness.

  10. Combating Terrorism Technical Support Office. 2008 Review

    Science.gov (United States)

    2009-01-15

    Develop advanced methods to extract and enhance audio recordings and video images from surveillance sources. Identify computer systems and media...Investigative Support & Forensics IS F Selected Completed Projects Steganography Decryption Steganography , the art of hiding messages in other innocuous...messages containing steganography , then isolates and decrypts the hidden message. Besides having advanced detection and decryption capabilities, the

  11. Downhole drilling motors: technical review. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, W.C.; McDonald, W.J.; Nixon, J.D.; Matson, L.W.

    1977-08-01

    Dyna-Drills and turbodrills are used primarily for directional drilling where it is critical that the drillpipe not be rotated. These tools are not widely used for straight-hole drilling because of problems with bearing failures, low power outputs, low bit pressures, and high rotary speeds. The high rotary speeds produce bit bearing failures in 10 to 15 h, compared to 100 to 200 h life at lower rotary speeds. The technology now exists to develop reliable high-torque motors which will operate roller bits at speeds of 150 to 250 RPM and diamond bits at speeds of 400 to 800 RPM for periods of 100 to 200 hours. Sealed bearing assemblies which allow the bearings to operate in lubricant are being developed. These improved bearings allow bits to operate at the high bit weights needed for optimum drilling. Improved drilling motors can reduce drilling costs to significantly increase the number of wells drilled per drilling rig per year. Now, this is increasingly important because of the drilling rig shortage developing in this country. At least ten companies are working on the development of improved drilling motors and it is likely that several of these new motors will become commercially available within the next 2 to 3 years. Several companies are working on the development of improved high speed roller bits for use on drilling motors. The development of these high speed bits should significantly increase the use of drilling motors since bit bearing failures are a major problem when drilling with motors. The development of reliable, high-speed STRATAPAX bits should also increase motor useage since these bits drilling most effectively at rotary speeds of 300 to 500 RPM.

  12. Technical Report: A Review of Groupware Technologies

    Science.gov (United States)

    1996-05-21

    attendees’ most up - todate calendars. As soon as users enter meeting requests, the program notifies attendees, updates their calendars, and blocks the...Edition, 12 March 1996, p NE4. iv use and set up , especially when compared to typical client/server architectures in an organization. Groupware... up -front planning with management, users, and information systems specialists is necessary to find the right match of groupware functionality for an

  13. Review of reasearch and technical development focused

    Directory of Open Access Journals (Sweden)

    Slavkovský Marián

    1998-12-01

    Full Text Available Treatment of flotation tetrahedrite concentrates produced from the of ore mined in the Rudňany and Rožňava ore deposits is a very complex technological problem. This problem has not been solved succesfuly so far. The presence and quality of undesired metal components such as antimony and mercury in the product of a wet ore dressing is a limiting factor for subsequent metalurgical process to obtain pure metal copper and/or silver in copper smelter plants. This factor has been the principal reason of a great effort provided in this respects by both, manufacturers and reaserchers mainly in the last 25 years. This article is focused on the summary of mentioned activities.

  14. Technical strategies in the research of plant salt-responsive proteomics: A review.%植物盐胁迫应答蛋白质组学研究的技术策略

    Institute of Scientific and Technical Information of China (English)

    张恒; 戴绍军

    2011-01-01

    Soil salinization is one of the key factors limiting plant growth and distribution. To explore plant molecular salt-responsive mechanisms is the basis of enhancing plant salt tolerance in virtue of molecular biological techniques, and also, the hotspot of plant physiology and molecular ecology. High throughput proteomics approaches include two-dimensional electrophoresis (2-DE), blue-native/SDS-PAGE ( BN/SDS-PAGE), two-dimensional fluorescence difference gel electrophoresis (2D DIGE) , liquid chromatography (LC) , and various mass spectrometry (MS) techniques, being widely applied in the research of plant salt-response and supplied important information for understanding plant molecular salt-tolerant mechanisms. In this paper, a review was made on the technical strategies applied in the research of plant salt-responsive proteomics.%土壤盐渍化是限制植物生长和分布的关键因素之一.揭示植物响应盐胁迫的分子机理是借助分子生物学手段提高植物耐盐性的基础,也是当前植物生理与分子生态学研究的热点问题.高通量的蛋白质组学技术体系包括双向电泳技术、蓝色自然胶电泳技术、双向荧光差异凝胶电泳技术、液相色谱技术,以及各种生物质谱技术,已经被广泛应用于植物应答盐胁迫研究,为解析植物耐盐分子机制提供了重要信息.本文综述了应用于植物盐胁迫响应蛋白质组学研究的技术策略.

  15. INDEPENDENT TECHNICAL REVIEW OF THE FOCUSED FEASIBILITY STUDY AND PROPOSED PLAN FOR DESIGNATED SOLID WASTE MANAGEMENT UNITS CONTRIBUTING TO THE SOUTHWEST GROUNDWATER PLUME AT THE PADUCAH GASEOUS DIFFUSION PLANT

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Eddy-Dilek, C.; Amidon, M.; Rossabi, J.; Stewart, L.

    2011-05-31

    The U. S. Department of Energy (DOE) is currently developing a Proposed Plan (PP) for remediation of designated sources of chlorinated solvents that contribute contamination to the Southwest (SW) Groundwater Plume at the Paducah Gaseous Diffusion Plant (PGDP), in Paducah, KY. The principal contaminants in the SW Plume are trichloroethene (TCE) and other volatile organic compounds (VOCs); these industrial solvents were used and disposed in various facilities and locations at PGDP. In the SW plume area, residual TCE sources are primarily in the fine-grained sediments of the Upper Continental Recharge System (UCRS), a partially saturated zone that delivers contaminants downward into the coarse-grained Regional Gravel Aquifer (RGA). The RGA serves as the significant lateral groundwater transport pathway for the plume. In the SW Plume area, the four main contributing TCE source units are: (1) Solid Waste Management Unit (SWMU) 1 / Oil Landfarm; (2) C-720 Building TCE Northeast Spill Site (SWMU 211A); (3) C-720 Building TCE Southeast Spill Site (SWMU 211B); and (4) C-747 Contaminated Burial Yard (SWMU 4). The PP presents the Preferred Alternatives for remediation of VOCs in the UCRS at the Oil Landfarm and the C-720 Building spill sites. The basis for the PP is documented in a Focused Feasibility Study (FFS) (DOE, 2011) and a Site Investigation Report (SI) (DOE, 2007). The SW plume is currently within the boundaries of PGDP (i.e., does not extend off-site). Nonetheless, reasonable mitigation of the multiple contaminant sources contributing to the SW plume is one of the necessary components identified in the PGDP End State Vision (DOE, 2005). Because of the importance of the proposed actions DOE assembled an Independent Technical Review (ITR) team to provide input and assistance in finalizing the PP.

  16. Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

    Science.gov (United States)

    Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

    2017-08-25

    Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. NCDC Technical Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCDC Technical Reports is a set of retrospective analyses produced by the Research Customer Service Group and the National Climatic Data Center from 1995 to 2008....

  18. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  19. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...... in which the human participants orient towards the artefact in different ways; thereby, the construction of technical agency can shift from moment to moment....

  20. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  1. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  2. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...... websites/using social media, formal reports, recommendation and feasibility reports, proposals, user manuals). Section 3: Professional Communication (2 chapters and 2 appendices on presentations, job application materials, brief handbook for tech writers, documenting sources)....

  3. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...... websites/using social media, formal reports, recommendation and feasibility reports, proposals, user manuals). Section 3: Professional Communication (2 chapters and 2 appendices on presentations, job application materials, brief handbook for tech writers, documenting sources)....

  4. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2013-05-13

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013... to the webcast. The Capitol Connection provides technical support for webcasts and offers the...

  5. Scientific, Technical and Economic Committee for Fisheries (STECF) – Opinion by written procedure – Review of scientific advice for 2013- part I – Advice on stocks in the Baltic Sea

    DEFF Research Database (Denmark)

    The scientific advice on the stocks and fisheries in the Baltic Sea in 2013 evaluated and endorsed by the Scientific, Technical and Economic Committee for Fisheries (STECF) by written procedure in June 2012 on a request by the European Commission......The scientific advice on the stocks and fisheries in the Baltic Sea in 2013 evaluated and endorsed by the Scientific, Technical and Economic Committee for Fisheries (STECF) by written procedure in June 2012 on a request by the European Commission...

  6. The Office of Technical Services: A New Deal Idea in the Cold War.

    Science.gov (United States)

    Stewart, Robert K.

    1993-01-01

    Reviews and analyzes a key legislative initiative following World War II which sought to assign to the federal government a role in gathering and communicating scientific and technical information to private industry. Creation of the Office of Technical Services and its eventual transformation to the National and Technical Information Service is…

  7. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Brizard, Alain J

    2009-12-31

    Final Technical Report for U.S. Department of Energy Grant No. DE-FG02-09ER55005 Nonlinear FLR Effects in Reduced Fluid Models Alain J. Brizard, Saint Michael's College The above-mentioned DoE grant was used to support research activities by the PI during a sabbatical leave from Saint Michael's College in 2009. The major focus of the work was the role played by guiding-center and gyrocenter (linear and nonlinear) polarization and magnetization effects in understanding transport processes in turbulent magnetized plasmas. The theoretical tools used for this work include Lie-transform perturbation methods and Lagrangian (variational) methods developed by the PI in previous work. The present final technical report lists (I) the peer-reviewed publications that were written based on work funded by the Grant; (II) invited and contributed conference presentations during the period funded by the Grant; and (III) seminars presented during the period funded by the Grant. I. Peer-reviewed Publications A.J. Brizard and N. Tronko, 2011, Exact momentum conservation for the gyrokinetic Vlasov- Poisson equations, Physics of Plasmas 18 , 082307:1-14 [http://dx.doi.org/10.1063/1.3625554 ]. J. Decker, Y. Peysson, A.J. Brizard, and F.-X. Duthoit, 2010, Orbit-averaged guiding-center Fokker-Planck operator for numerical applications, Physics of Plasmas 17, 112513:1-12 [http://dx.doi.org/10.1063/1.3519514]. A.J. Brizard, 2010, Noether derivation of exact conservation laws for dissipationless reduced fluid models, Physics of Plasmas 17, 112503:1-8 [http://dx.doi.org/10.1063/1.3515303]. F.-X. Duthoit, A.J. Brizard, Y. Peysson, and J. Decker, 2010, Perturbation analysis of trapped particle dynamics in axisymmetric dipole geometry, Physics of Plasmas 17, 102903:1-9 [http://dx.doi.org/10.1063/1.3486554]. A.J. Brizard, 2010, Exact energy conservation laws for full and truncated nonlinear gyrokinetic equations, Physics of Plasmas 17, 042303:1-11 [http://dx.doi.org/10.1063/1.3374428]. A

  8. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  9. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  10. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

  11. Windows 10 Technical Preview

    OpenAIRE

    Jyväsjärvi, Teppo

    2015-01-01

    Tässä opinnäytetyössä tutustaan uuden kesällä 2015 virallisesti julkaistavan Windows 10 -käyttöjärjestelmän Technical Preview -kehitysversioon. Ensimmäinen Technical Preview -versio julkaistiin syksyllä 2014. Opinnäytetyössä tutustaan Windows 10:n uusin ominaisuuksiin ja tehdään vertailua aiemman Windows 8.1 -version kanssa. Työssä Windows 10 Technical Preview asennetaan virtuaalikoneelle, käydään läpi asennuksen eri vaiheet sekä suurimmat muutokset käyttöliittymässä ja sovelluksissa. Op...

  12. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  13. Yucca Mountain Climate Technical Support Representative

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, Saxon E

    2007-10-23

    The primary objective of Project Activity ORD-FY04-012, “Yucca Mountain Climate Technical Support Representative,” was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

  14. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure......, the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop...

  15. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  16. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  17. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  18. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  19. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  20. PISA 2012 Technical Report

    Science.gov (United States)

    OECD Publishing, 2014

    2014-01-01

    The "PISA 2012 Technical Report" describes the methodology underlying the PISA 2012 survey, which tested 15-year-olds' competencies in mathematics, reading and science and, in some countries, problem solving and financial literacy. It examines the design and implementation of the project at a level of detail that allows researchers to…

  1. Routledge French technical dictionary

    CERN Document Server

    1994-01-01

    The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.

  2. Technical Due Diligence

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Varano, Mattia

    2011-01-01

    Technical Due Diligence (TDD) as an evaluation of the performance of constructed facilities has become an important new field of practice for consultants. Before the financial crisis started in autumn 2008 it represented the fastest growing activity in some consulting companies. TDD is mostly car...

  3. CATV Technical Papers.

    Science.gov (United States)

    National Cable Television Association, Inc., Washington, DC.

    Complete technical papers of the 1977 National Cable Television Association Convention are included in this report. Twenty-two of 32 papers and two abstracts cover the topics of advanced cable television techniques, human reactions to television picture impairment, special displays and services, protection from theft of service, everyday…

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  6. Improved technical specifications

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, D.R.

    1994-12-31

    Improved technical specifications for nuclear power plants are outlined. The objectives of this work are to improve safety, provide a clearer understanding of safety significance, and ease NRC and industry administrative burdens. Line item improvements, bases, and implementation of the specifications are discussed.

  7. Materials Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  8. IMPROVEMENT OF TECHNICAL EDUCATION IN PUBLIC TECHNICAL SECONDARY SCHOOLS (ECOLE TECHNIQUE OFFICIEL - ETOS IN RWANDA

    Directory of Open Access Journals (Sweden)

    Maina Maringa

    2010-05-01

    Full Text Available This paper presents a brief review of the state of technical education in Rwanda based on a study conducted in 2007, with pertinent recommendations. The background of technical education in the country is appreciated first, and then followed up with a situational analysis. Thereafter, a 5-year implementation project plan proposal, to address the identified shortcomings, needs, and expectations of government is advanced. The need to raise access to post tronc commun (post O-Level technical training is addressed within this proposal with a specific interest to increase the capacity and range of programmes running in the existing ETOs, and the introduction of new ETOs where deemed necessary. The establishment and sustenance of a good quality technical education system is also given consideration in this proposal for effective and efficient rehabilitation of existing physical facilities and the purchase of new and appropriate training equipment. Simultaneously, considerations for increasing the number of technical teachers in the system to a determined optimum level while setting minimum acceptable qualifications for technical teachers are advanced. Implementation of this proposal is expected to contribute greatly to the continuous development of a labour pool with skills that are relevant to and adequate for the needs of the economy.

  9. Technical evaluation of RETS-required reports for Fort Calhoun Station Unit 1

    Energy Technology Data Exchange (ETDEWEB)

    Magleby, E.H.; Young, T.E.

    1985-06-24

    A review of the reports required by federal regulations and the plant-specific Radiological Effluent Technical Specifications (RETS) for operations conducted during 1983 was performed. The periodic reports reviewed for Fort Calhoun Station Unit 1 were two Semiannual Reports for Technical Specification 5.9.4. The principal review guidelines were the plant's specific RETS, NUREG-0133, ''Preparation of Radiological Effluent Technical Specifications for Nuclear Power Plants'', and NRC Guidance on the Review of the Process Control Programs. The Licensee's submitted reports were found to be reasonably complete and consistent with the review guidelines. 4 refs.

  10. 77 FR 58590 - Determining Technical Adequacy of Probabilistic Risk Assessment for Risk-Informed License...

    Science.gov (United States)

    2012-09-21

    ... COMMISSION Determining Technical Adequacy of Probabilistic Risk Assessment for Risk-Informed License... NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR Edition,'' Section 19.1, ``Determining the Technical Adequacy of Probabilistic Risk Assessment...

  11. Technical Assistance Needs Assessments (TANAs)

    Science.gov (United States)

    The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

  12. El Salvador - Formal Technical Education

    Data.gov (United States)

    Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

  13. ION-1 technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Halbig, J.K.; Caine, J.C.

    1985-07-01

    The portable gamma-ray and neutron detector electronics (ION-1) gives a digital readout of the current-mode response produced by gamma rays in an ion chamber and of amplification and scaling of pulses received from a neutron detector. The primary application is the measurement of gamma-ray and neutron activity of irradiated reactor fuels stored at a reactor or at a storage pond away from a reactor. ION-1 is the first such instrument to use a design that allows communication of procedures, response, and results between instrument and inspector. It prompts the inspector through procedures, carries out programmed measurement steps, calculates results and error estimates, and performs internal diagnostic checks. This Technical Manual describes adjustment procedures and limited technical information that enable the inspector to troubleshoot at the board level. 5 figs., 10 tabs.

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: PowerPoint 2003 (F) : 25.4.2005 (1 jour) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11 & 12.5.2005 (2 days) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) Introduction to ANSYS: 21 - 24.6.2005 (4 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

  16. Bioethics for Technical Experts

    Science.gov (United States)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  17. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  18. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... dimension of modularity like irrational behaviors, cultural differences, learning processes, social organization and institutional influences on modularity. The paper addresses this gab offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...

  19. Manageability of Technical Innovation through Technical Property Rights

    Directory of Open Access Journals (Sweden)

    Michael Horeth

    2016-06-01

    Full Text Available The term innovation is used in many respects and has been evolving over the last decades. This paper mainly focusses on managing technical innovation and differentiates this kind of innovation from others. For managing technical innovation, this work applies technical property rights, patents and utility models. The opportunity to protect the companies’ technical knowledge legally is, apart from strategic measurements like trade secrecy, a very valuable tool to manage and commercialize innovation considering the shift from closed to rather open innovation. This paper discusses the applicability of legal protection measurements for the management of technical innovation containing a critical appraisal.

  20. Percutaneous vertebroplasty: technical considerations

    Institute of Scientific and Technical Information of China (English)

    Gao-jun TENG; Shi-cheng HE

    2005-01-01

    Percutaneous vertebroplasty (PVP) is a relative new interventional technique, which is widely used in treatment of vertebral collapse caused by vertebral neoplasms and osteoporotic compression fractures. The general technical considerations of PVP techniques are discussed based on authors' experience obtained over 400 patients in the past years in this article, including preparation of PMMA, instrument of PVP, guidance and puncture approaches, and technique of the procedure, etc. The conclusion is that PVP is a safe procedure if the physicians handle it properly.

  1. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...

  2. Technical approach document

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  3. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  4. The role of non-technical skills in surgery

    Directory of Open Access Journals (Sweden)

    Riaz A. Agha

    2015-12-01

    This narrative review used a number of sources including written and online, there was no specific search strategy of defined databases. Modern surgical practice requires; technical and non-technical skills, evidence-based practice, an emphasis on lifelong learning, monitoring of outcomes and a supportive institutional and health service framework. Finally these requirements need to be combined with a number of personal and professional values including integrity, professionalism and compassionate, patient-centred care.

  5. Technical evaluation of seismic qualification of safety-related equipment

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yang Hui; Park, Heong Gee; Park, Yeong Seok [Univ. of Incheon, Incheon (Korea, Republic of)] (and others)

    1994-04-15

    This study is purposed to evaluate the technical acceptability of the procedures and techniques of seismic qualifications which were performed for the YGN 3 and 4 safety-related equipment.This study is also targeted to suggest a systematized technical procedure guide for the effective performance and review of the seismic qualification, which reflects the most up-to-date licensing requirements and state-of the-art.

  6. Chilean Nominal Exchange Rate: Forecasting Based Upon Technical Analysis

    OpenAIRE

    Ana María Abarca; Felipe Alarcón; Pablo Pincheira; Jorge Selaive

    2007-01-01

    : This work presents a review of the main indicators used in the technical analysis of the peso-dollar parity. We explain the interpretations carried out by technical analysts of these indicators and perform forecasting analysis of the Relative Strength Index (RSI) to predict exchange rate returns at daily frequency. The predictive exercises are done using both in-sample and out-of-sample techniques, and report a robust forecasting ability for horizons within 7 weeks.

  7. A Review of Technical Topic Analysis Based on Text Mining%基于文本挖掘的专利技术主题分析研究综述

    Institute of Scientific and Technical Information of China (English)

    胡阿沛; 张静; 雷孝平; 张晓宇

    2013-01-01

    为应对专利数量巨大和技术的日益复杂给专利技术主题分析带来的挑战,以及利用文本挖掘技术的专利技术主题分析近来成为研究热点。首先介绍文本挖掘的概念和其发展历史。其次,对目前基于文本挖掘的专利技术主题分析方法进行了归纳,包括主题词词频分析、共词分析、文本聚类分析和与引文聚类结合的分析方法,总结其常用的分析工具并介绍新的科学图谱分析软件---SciMAT。最后总结基于文本挖掘的专利技术主题分析方法的优点与不足,为其将来的研究提供建议。%To cope with the challenges of patent technical topic analysis presented by huge amounts of patent documents and increasingly sophisticated technology, this paper uses text mining technology to assist technical topic analysis and get researchers' focus in recent years. Firstly, the concept of text mining and its development history are introduced. Secondly, the methods of analyzing patent technical topic based on text mining is summarized, including word frequency analysis, co-word analysis, text clustering analysis and analysis combined with citation clustering. Some important analytical tools and a new science mapping analysis software tool SciMAT are introduced. Final-ly, the paper points out the advantages and deficiencies of technical topic analysis based on text mining and future research direction.

  8. Technical Leadership Development Program

    Science.gov (United States)

    2014-04-30

    framework and SYS 350A focus areas were then used to identify key SYS 350A syllabus segments, and then to develop Storyboards to support design reviews...of the planned SYS 350A segments. The SYS 350A storyboards were reviewed during a DAU-SERC red team in August 2011 and this established the design

  9. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  10. Technical barrier challenges

    Institute of Scientific and Technical Information of China (English)

    李思佳

    2014-01-01

    according to a famouse report,the foreign Technical Barriers to Trade(TBT)have some effects on the exports of the People’s Republic of China.Major findings are as follows:(1)TBT makes it more difficult for China to export;(2)TBT increases the costs of Chinese export commodities;(3)TBT causes friction and confilicts in the international trade;(4)SOME developed countries have moved their phase-outs to China and other developing countries,which have become victims of TBT.

  11. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  12. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  13. TECHNICAL BASIS FOR VENTILATION REQUIREMENTS IN TANK FARMS OPERATING SPECIFICATIONS DOCUMENTS

    Energy Technology Data Exchange (ETDEWEB)

    BERGLIN, E J

    2003-06-23

    This report provides the technical basis for high efficiency particulate air filter (HEPA) for Hanford tank farm ventilation systems (sometimes known as heating, ventilation and air conditioning [HVAC]) to support limits defined in Process Engineering Operating Specification Documents (OSDs). This technical basis included a review of older technical basis and provides clarifications, as necessary, to technical basis limit revisions or justification. This document provides an updated technical basis for tank farm ventilation systems related to Operation Specification Documents (OSDs) for double-shell tanks (DSTs), single-shell tanks (SSTs), double-contained receiver tanks (DCRTs), catch tanks, and various other miscellaneous facilities.

  14. Risk based technique for improving technical specifications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, I. S.; Jae, M. S.; Kim, B. S.; Hwang, S. W.; Kang, K. M.; Park, S. S.; Yu, Y. S. [Hanyang Univ., Seoul (Korea, Republic of)

    2001-03-15

    The objective of this study is to develop the systematic guidance for reviewing the documents associated with the changes of technical specifications. The work done in this fiscal year is the following : surveys in TS requirements, TS improvements and TS regulations in foreign countries as well as Korea, surveys on the state-of-the-art of RITSs and their use in Korea, development of a decision-making framework for both the licensee and the regulation agency, description of risk measures, assessment methodology on STI/AOT, and adverse effects caused by periodic maintenance, which are explained in appendix. The results of this study might contribute to enhancing the quality of the current technical specifications and contribute to preparing the risk informed regulation program using the decision-making framework developed in this study.

  15. [Seeing more : Technical innovations in regional anesthesia].

    Science.gov (United States)

    Wiesmann, T; Steinfeldt, T; Volk, T; Schwemmer, U; Kessler, P; Wulf, H

    2014-11-01

    Visualization and verification are key factors since the implementation of ultrasound-guided regional anesthesia. This article reviews and discusses newer technical innovations in regional anesthesia with regard to optimization of needle guidance, improvements in needle visibility, technical improvements in ultrasound techniques and innovative technologies in regional anesthesia. Clinically available applications are presented as well as experimental tools and techniques with a potential for clinical implementation in the future. Mechanical needle guides are used to improve alignment of needle axis and ultrasound beam axis. Compound imaging technology improves needle visibility in steep needle insertion angles and is already implemented in daily clinical practice. Sonoelastography improves tissue discrimination and detection of small amounts of fluids. Benefits of 3D and 4D ultrasound in regional anesthesia are discussed as well as experimental tools for tissue discrimination, such as optical reflection spectrophotometry.

  16. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  17. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  20. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  1. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  2. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  3. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  4. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

  5. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

  6. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  7. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  8. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  10. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  12. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  13. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  14. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

  15. PESTICIDE APPLICATION TECHNICS IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Đuro Banaj

    2011-06-01

    Full Text Available The academic textbook Pesticide application tehnics improvement is the result of several-year recording theoretical models, numerous practical tests, and data collection relating to technical systems in plant protection and its environment in the narrowest sense. In this first edition, the authors cover the area they have dealt with for many years. The authors aimed to present complete and clear methods how to solve specific problems in the agricultural practice management, plant protection, and direct practice application – ‘‘Know- How'', with as many as possible useful data. References used, along with local ones, are mostly American and from Western Europe. This textbook is intended for those who already use the agricultural technique in plant protection and those who are just acquiring the basics of technical systems proper application in daily practice, regardless the size of the agricultural farm. The authors covered in details and explained some bases of physics logic, analysis, and synthesis of specific laws while using pesticides due to extremely importance in understanding the problem area.

  16. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  17. Southwest Region Experiment Station - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, A

    2011-08-19

    Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growing U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing

  18. Technical Status Review Appraisal of the Suitability of Turbulence Models in Flow Calculations (Revue Technique - L’Evaluation de l’Applicabilite des Modeles de Turbulence dans de Calcul des Ecoulements)

    Science.gov (United States)

    1991-07-01

    decomposition of <fij> is less important extensions and on the peculiarities of corn - because the viscous stresses are negligible in pressible flows, turbulent...experiment, an adverse TUSAS Aer)space Industries (TAI), Inc. and pressure gradient is applied on a 35" swept flat the Middle East Technical University...The fice. Figure 16 shows the top view of the jet corn - prescribed motion is a(S) - 10’ +bt*i(2A1.t) where paring the surface pressures of the

  19. Cambridge technicals level 3 IT

    CERN Document Server

    Ellis, Victoria; Middleton, Saundra

    2016-01-01

    Support your teaching of the new Cambridge Technicals 2016 suite with Cambridge Technical Level 3 IT, developed in partnership between OCR and Hodder Education; this textbook covers each specialist pathway and ensures your ability to deliver a flexible course that is both vocationally focused and academically thorough. Cambridge Technical Level 3 IT is matched exactly to the new specification and follows specialist pathways in IT Infrastructure Technician, Emerging Digital Technology Practitioner, Application Developer, and Data Analyst. - Ensures effective teaching of each specialis

  20. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Denney, R.M. (ed.)

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  1. ERLN Technical Support for Labs

    Science.gov (United States)

    The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

  2. Technical Assistance to Brownfields Communities

    Science.gov (United States)

    This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

  3. TECHNICAL TRAINING PROGRAMME

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002: Working in a Cleanroom A new, free of charge, half-day seminar is offered in the context of Technical Training for the LHC, for personnel working or managing activities in a cleanroom (for example physicists, engineers and technicians working at or visiting the laboratory). CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed, if possible. More information and registration is available HERE The next session, in English, will be on 24.4 (afternoon). Other sessions, in French and English, will be offered following demand. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  4. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  6. Technical applications of aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  7. LLNL 1981: technical horizons

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  8. Technical Training: ELEC-2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

  9. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial....... Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  10. Technical Math For Dummies

    CERN Document Server

    Schoenborn, Barry

    2010-01-01

    Technical Math For Dummies is your one-stop, hands-on guide to acing the math courses you’ll encounter as you work toward getting your degree, certifacation, or�license in the skilled trades. You’ll get easy-to-follow, plain-English guidance on mathematical formulas and methods that professionals use every day in the automotive, health, construction, licensed trades, maintenance, and other trades. You’ll learn how to apply concepts of algebra, geometry, and trigonometry and their formulas related to occupational areas of study. Plus, you’ll find out how to perform basic arithmetic

  11. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    . Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  12. FINAL/ SCIENTIFIC TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  13. INOPS Technical Report

    DEFF Research Database (Denmark)

    Lindholst, Andrej Christian

    This research report contains background analyses and findings from the INOPS research project. The purpose of the INOPS project was, from an international perspective, to describe, analyse and recommend different forms of contracting out and public–private co-operations within the technical area...... in municipalities, including a focus on innovation and how to involve contractors ‘optimally’. The INOPS project should investigate the background for and implementation of various forms of contracting out and public–private co-operation based on experiences with contracting out in the roads and parks area...... in Denmark, Sweden, Norway and England. The research report addresses three key research questions in a comparative perspective: 1. Why are park and road maintenance services contracted out? 2. How are park and road maintenance services contracted out? 3. What are the outcomes from contracting out park...

  14. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

    2016-08-17

    ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

  15. Non-technical skills in histopathology: definition and discussion.

    Science.gov (United States)

    Johnston, Peter W; Fioratou, Evie; Flin, Rhona

    2011-09-01

    Health care is a high-risk industry, with most documented adverse incidents being associated with 'human factors' including cognitive and social skills termed 'non-technical skills'. Non-technical skills complement the diagnostic and specialist skills and professional attributes required by medical practitioners, including histopathologists, and can enhance the quality of practice and delivery of health-care services and thus contribute to patient safety. This review aims to introduce histopathologists to non-technical skills and how these pertain to everyday histopathological practice. Drawing from other domains in medicine, specifically anaesthesia and surgery, a variety of non-technical skills are identified and described in the context of histopathology to illustrate the role each plays, often collectively, in daily practice. The generic non-technical skills are defined as situation awareness, decision-making, communication, teamwork, leadership, managing stress and coping with fatigue. Example scenarios from histopathology are presented and the contributions to outcomes made by non-technical skills are explained. Consideration of these specific non-technical skills as a component in histopathology training may benefit practitioners as well as assuring patient safety.

  16. Technical potential for proliferation in Northeast Asian states

    Energy Technology Data Exchange (ETDEWEB)

    Joeck, N.; Kramer, R. [Lawrence Livermore National Lab., CA (United States). Directorate for Nonproliferation, Arms Control, and International Security

    1994-10-14

    This paper is intended to review the technical capabilities of the states in Northeast Asia--principally Japan, South Korea, and North Korea--to develop nuclear weapons. All three nonnuclear weapons states in Northeast Asia have the technical capability to develop nuclear weapons. Japan and South Korea have intrusive safeguards and inspection arrangements on their nuclear programs, which allow their neighbors and the rest of the world to verify that they have not changed that status, and that they are living up to their NPT commitments. Despite its original commitment to the NPT, North Korea has yet to establish similar arrangements. it is ironic that the country with the smallest and technically least sophisticated nuclear program is the one creating the greatest concern about nuclear proliferation in the region. This irony illustrates the point made in the introduction, however. Nuclear proliferation is more a function of political decisionmaking than of technical capability.

  17. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E.

    1996-09-30

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of September 30, 1996. The cassette tape also includes the delta files that dellinate the differences between this revision and revision 4 (May 10, 1996) of the Hanford Site Technical Baseline Database.

  18. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E., Westinghouse Hanford

    1996-05-10

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of May 10, 1996. The cassette tape also includes the delta files that delineate the differences between this revision and revision 3 (April 10, 1996) of the Hanford Site Technical Baseline Database.

  19. Grid Interaction Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Grid Interaction Technical Team (GITT) is to support a transition scenario to large scale grid-connected vehicle charging with transformational technology, proof of concept and information dissemination. The GITT facilitates technical coordination and collaboration between vehicle-grid connectivity and communication activities among U.S. DRIVE government and industry partners.

  20. Technical Documentation and Legal Liability.

    Science.gov (United States)

    Caher, John M.

    1995-01-01

    States that litigation over the interpretation and sufficiency of technical documentation is increasingly common as a number of suits have been filed in state and federal courts. Describes the case of "Martin versus Hacker," a recent case in which New York's highest court analyzed a technical writer's prose in the context of a lawsuit…

  1. EDI and the Technical Communicator.

    Science.gov (United States)

    Eiler, Mary Ann

    1994-01-01

    Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

  2. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study deve

  3. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  4. COMPASS Accelerator Design Technical Overview

    Energy Technology Data Exchange (ETDEWEB)

    Nanni, Emilio; Dolgashev, Valery; Tantawi, Sami; Neilson, Jeff; /SLAC

    2016-03-14

    This report is a survey of technical options for generating a MeV-class accelerator for space based science applications. The survey was performed focusing on the primary technical requirements of the accelerator in the context of a satellite environment with its unique challenges of limited electrical power (PE), thermal isolation, dimensions, payload requirement and electrical isolation.

  5. Geothermal-well completions: a survey and technical evaluation of existing equipment and needs

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, J.E.; Snyder, R.E.

    1982-07-01

    The geothermal environment and associated well completion problems are reviewed. Existing well completion equipment is surveyed and limitations are identified. A technical evaluation of selected completion equipment is presented. The technical evaluation concentrates on well cementing equipment and identifies potential failure mechanisms which limit the effectiveness of these tools. Equipment employed in sand control, perforating, and corrosion control are identified as potential subjects for future technical evaluation.

  6. COMPARATIVE ANALYSIS BETWEEN THE FUNDAMENTAL AND TECHNICAL ANALYSIS OF STOCKS

    Directory of Open Access Journals (Sweden)

    Nada Petrusheva

    2016-04-01

    Full Text Available In the world of investing and trading, in order to have a definite advantage and constantly create profit, you need to have a strategic approach. Generally speaking, the two main schools of thought and strategies in financial markets are fundamental and technical analysis. Fundamental and technical analysis differ in several aspects, such as the way of functioning and execution, the time horizon used, the tools used and their objective. These differences lead to certain advantages and disadvantages of each of the analyses. Fundamental and technical analysis are also a subject of critical reviews by the academic and scientific community and many of these reviews concern the methods of their application, i.e. the possibility of combining the two analyses and using them complementarily to fully utilize their strengths and advantages.

  7. Technical planning activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  8. Non-technical skills of surgical trainees and experienced surgeons.

    Science.gov (United States)

    Gostlow, H; Marlow, N; Thomas, M J W; Hewett, P J; Kiermeier, A; Babidge, W; Altree, M; Pena, G; Maddern, G

    2017-05-01

    In addition to technical expertise, surgical competence requires effective non-technical skills to ensure patient safety and maintenance of standards. Recently the Royal Australasian College of Surgeons implemented a new Surgical Education and Training (SET) curriculum that incorporated non-technical skills considered essential for a competent surgeon. This study sought to compare the non-technical skills of experienced surgeons who completed their training before the introduction of SET with the non-technical skills of more recent trainees. Surgical trainees and experienced surgeons undertook a simulated scenario designed to challenge their non-technical skills. Scenarios were video recorded and participants were assessed using the Non-Technical Skills for Surgeons (NOTSS) scoring system. Participants were divided into subgroups according to years of experience and their NOTSS scores were compared. For most NOTSS elements, mean scores increased initially, peaking around the time of Fellowship, before decreasing roughly linearly over time. There was a significant downward trend in score with increasing years since being awarded Fellowship for six of the 12 NOTSS elements: considering options (score -0·015 units per year), implementing and reviewing decisions (-0·020 per year), establishing a shared understanding (-0·014 per year), setting and maintaining standards (-0·024 per year), supporting others (-0·031 per year) and coping with pressure (-0·015 per year). The drop in NOTSS score was unexpected and highlights that even experienced surgeons are not immune to deficiencies in non-technical skills. Consideration should be given to continuing professional development programmes focusing on non-technical skills, regardless of the level of professional experience. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

  9. Non-technical skills in the intensive care unit.

    Science.gov (United States)

    Reader, T; Flin, R; Lauche, K; Cuthbertson, B H

    2006-05-01

    In high-risk industries such as aviation, the skills not related directly to technical expertise, but crucial for maintaining safety (e.g. teamwork), have been categorized as non-technical skills. Recently, research in anaesthesia has identified and developed a taxonomy of the non-technical skills requisite for safety in the operating theatre. Although many of the principles related to performance and safety within anaesthesia are relevant to the intensive care unit (ICU), relatively little research has been done to identify the non-technical skills required for safe practice within the ICU. This review focused upon critical incident studies in the ICU, in order to examine whether the contributory factors identified as underlying the critical incidents, were associated with the skill categories (e.g. task management, teamwork, situation awareness and decision making) outlined in the Anaesthetists' Non-technical Skills (ANTS) taxonomy. We found that a large proportion of the contributory factors underlying critical incidents could be attributed to a non-technical skill category outlined in the ANTS taxonomy. This is informative both for future critical incident reporting, and also as an indication that the ANTS taxonomy may provide a good starting point for the development of a non-technical skills taxonomy for intensive care. However, the ICU presents a range of unique challenges to practitioners working within it. It is therefore necessary to conduct further non-technical skills research, using human factors techniques such as root-cause analyses, observation of behaviour, attitudinal surveys, studies of cognition, and structured interviews to develop a better understanding of the non-technical skills important for safety within the ICU. Examples of such research highlight the utility of these techniques.

  10. 7 CFR 1469.9 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance. 1469.9 Section 1469.9... Provisions § 1469.9 Technical assistance. (a) NRCS may use the services of NRCS-approved or certified Technical Service Providers in performing its responsibilities for technical assistance. (b) Technical...

  11. 75 FR 8928 - Submission for OMB Review; Comment Request

    Science.gov (United States)

    2010-02-26

    ... Information Management Services, Office of Management. Office of Vocational and Adult Education Type of Review: Revision. Title: Native American Career and Technical Education Program (NACTEP). Frequency: Annually... Technical Education Program (NACTEP) is requesting approval to collect semi-annual, annual/...

  12. Teaching Leadership in Technical Programs at Community Colleges

    Science.gov (United States)

    DeBlauw, Amanda L.; Daugherty, Jenny L.

    2017-01-01

    This descriptive study explored how community colleges are teaching leadership in technical programs. Leadership education curricular offerings were identified via a survey and selected programs reviewed. 68 Deans, Directors, or Chairpersons of a Business, Management, or Technology program completed the survey, representing 61 community colleges.…

  13. The Evolution of the National Early Childhood Technical Assistance Center

    Science.gov (United States)

    Gallagher, James J.; Danaher, Joan C.; Clifford, Richard M.

    2009-01-01

    This review traces the evolution from 1971 to the present of a national technical assistance (TA) program to support the creation, expansion, and improvement of services for infants, toddlers, and preschoolers with special needs. From its beginning as a TA resource for demonstration projects, to linking outreach projects' expertise with state…

  14. Regional technical innovation suitability and economic growth in China

    NARCIS (Netherlands)

    Zhou, Qing; Zhu, Dan; Ren, Liqin

    2012-01-01

    This paper aims to use quantitative method to analyse the suitability of regional technical innovation and further compare its influence to regional economic growth in China. Based on literature review, the authors develop an evaluation index system containing four aspects (namely, innovators, innov

  15. Regional technical innovation suitability and economic growth in China

    NARCIS (Netherlands)

    Zhou, Qing; Zhu, Dan; Brouwers-Ren, Liqin

    2012-01-01

    This paper aims to use quantitative method to analyse the suitability of regional technical innovation and further compare its influence to regional economic growth in China. Based on literature review, the authors develop an evaluation index system containing four aspects (namely, innovators,

  16. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  17. 77 FR 47047 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-08-07

    ... of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory... open meeting. SUMMARY: This notice announces an open meeting of the Biomass Research ] and Development... Biomass R&D Activities Update on DOE Biomass R&D Activities Review of the recently awarded Biomass...

  18. Bulletin Survey: Technical clarifications

    CERN Multimedia

    2002-01-01

    In the latest of our articles on the results of the Bulletin survey, we respond to some of your technical comments on the Electronic Bulletin. Many thanks to the more than 500 of you who completed the questionnaire. The full statistics will be published next week. 'It takes too long to download the pages' Yes, it's true that the Electronic Bulletin's download time isn't perfect but it will improve when the Bulletin migrates to another, faster database. 'I find it very difficult to locate all the articles' Some people experience difficulty negotiating their way through the Bulletin once they have entered a specific section. The blue column on the left contains an 'In this issue' link taking you to the other sections. What's more, the whole of the paper Bulletin is available in the electronic version. As the latter is relatively new, however, it will take a bit of time to get used to browsing through it. Many of you say that it's still too early to form an opinion. 'Pull-down menus would be good, so that yo...

  19. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide VITÈ

    2002-01-01

    Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

  20. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

  1. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  2. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  3. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  4. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: PowerPoint 2003 (F) : 25.4.2005 (1 jour) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ANSYS Workbench (F) : 9 - 12.5.2005 (4 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) La technique du vide : 12 & 13.5.2005 (2 jours) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) Introduction to ANSYS: 21 - 24.6.2005 (4 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 tech...

  6. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 - 8.7.2004 (3 jours) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924...

  9. FINAL TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    STEFAN VASILE; ZHENG LI

    2010-06-17

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  10. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  11. VLLEEM-2 technical workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    In order to overcome the limits of the energy-environment models, and to benefit at the same time of their past experiences, the VLEEM project proposes a genuine approach and innovative modelling tools to assess the energy-environment systems over the very long term, which are based on the strengths of existing long term energy models, but focussed on two major objectives: to describe normative futures which fit with a set of overall constraints, like the stabilisation of the concentration of green-house gases in the atmosphere, or the stabilisation of the overall inventory of plutonium and minor actinides, etc...; to describe and formalize the association of causalities necessary to bring the system from the present situation to the targeted future, through a '' back-casting '' approach. This first technical workshop presents the state of the art of the different Work Programmes. WP1:Enhancement of the Conceptual framework. WP2: Data base on conventional demand/supply technologies. WP3: Complement and up-date technology monographs. WP4: Formalization and computing of final VLEEM submodels. WP5: Case study 2030, 2050, 2100. (A.L.B.)

  12. GEM Technical Design Report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  13. Technical solutions to nonproliferation challenges

    Science.gov (United States)

    Satkowiak, Lawrence

    2014-05-01

    The threat of nuclear terrorism is real and poses a significant challenge to both U.S. and global security. For terrorists, the challenge is not so much the actual design of an improvised nuclear device (IND) but more the acquisition of the special nuclear material (SNM), either highly enriched uranium (HEU) or plutonium, to make the fission weapon. This paper provides two examples of technical solutions that were developed in support of the nonproliferation objective of reducing the opportunity for acquisition of HEU. The first example reviews technologies used to monitor centrifuge enrichment plants to determine if there is any diversion of uranium materials or misuse of facilities to produce undeclared product. The discussion begins with a brief overview of the basics of uranium processing and enrichment. The role of the International Atomic Energy Agency (IAEA), its safeguard objectives and how the technology evolved to meet those objectives will be described. The second example focuses on technologies developed and deployed to monitor the blend down of 500 metric tons of HEU from Russia's dismantled nuclear weapons to reactor fuel or low enriched uranium (LEU) under the U.S.-Russia HEU Purchase Agreement. This reactor fuel was then purchased by U.S. fuel fabricators and provided about half the fuel for the domestic power reactors. The Department of Energy established the HEU Transparency Program to provide confidence that weapons usable HEU was being blended down and thus removed from any potential theft scenario. Two measurement technologies, an enrichment meter and a flow monitor, were combined into an automated blend down monitoring system (BDMS) and were deployed to four sites in Russia to provide 24/7 monitoring of the blend down. Data was downloaded and analyzed periodically by inspectors to provide the assurances required.

  14. DXA: Technical aspects and application.

    Science.gov (United States)

    Bazzocchi, Alberto; Ponti, Federico; Albisinni, Ugo; Battista, Giuseppe; Guglielmi, Giuseppe

    2016-08-01

    The key role of dual-energy X-ray absorptiometry (DXA) in the management of metabolic bone diseases is well known. The role of DXA in the study of body composition and in the clinical evaluation of disorders which directly or indirectly involve the whole metabolism as they may induce changes in body mass and fat percentage is less known or less understood. DXA has a range of clinical applications in this field, from assessing associations between adipose or lean mass and the risk of disease to understanding and measuring the effects of pathophysiological processes or therapeutic interventions, in both adult and paediatric human populations as well as in pre-clinical settings. DXA analyses body composition at the molecular level that is basically translated into a clinical model made up of fat mass, non-bone lean mass, and bone mineral content. DXA allows total and regional assessment of the three above-mentioned compartments, usually by a whole-body scan. Since body composition is a hot topic today, manufacturers have steered the development of DXA technology and methodology towards this. New DXA machines have been designed to accommodate heavier and larger patients and to scan wider areas. New strategies, such as half-body assessment, permit accurate body scan and analysis of individuals exceeding scan field limits. Although DXA is a projective imaging technique, new solutions have recently allowed the differential estimate of subcutaneous and intra-abdominal visceral fat. The transition to narrow fan-beam densitometers has led to faster scan times and better resolution; however, inter- or intra-device variation exists depending on several factors. The purposes of this review are: (1) to appreciate the role of DXA in the study of body composition; (2) to understand potential limitations and pitfalls of DXA in the analysis of body composition; (3) to learn about technical elements and methods, and to become familiar with biomarkers in DXA. Copyright © 2016

  15. 75 FR 61228 - Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts

    Science.gov (United States)

    2010-10-04

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts Pursuant to its authority under section 5051 of Public Law 100-203, Nuclear Waste Policy Amendments Act...

  16. Mediation of Artefacts, Tools and Technical Objects: An International and French Perspective

    Science.gov (United States)

    Impedovo, Maria Antonietta; Andreucci, Colette; Ginestié, Jacques

    2017-01-01

    In this article we present a review of literature on the concept of Artefact, Tool and Technical Object in the light of sociocultural approach. Particular attention is given to present and discuss the French research tradition on the Technical Object and Technological education. The aim is to give a broad perspective to explore the mediation…

  17. Mediation of Artefacts, Tools and Technical Objects: An International and French Perspective

    Science.gov (United States)

    Impedovo, Maria Antonietta; Andreucci, Colette; Ginestié, Jacques

    2017-01-01

    In this article we present a review of literature on the concept of Artefact, Tool and Technical Object in the light of sociocultural approach. Particular attention is given to present and discuss the French research tradition on the Technical Object and Technological education. The aim is to give a broad perspective to explore the mediation…

  18. The Technical Report: An Analysis of Information Design and Packaging for an Inelastic Market.

    Science.gov (United States)

    Pinelli, Thomas E.; And Others

    As part of an evaluation of its scientific and technical information program, the National Aeronautics and Space Administration (NASA) conducted a review and analysis of structural, language, and presentation components of its technical report form. The investigation involved comparing and contrasting NASA's publications standards for technical…

  19. Technical and commercial aspects of the connection of wind turbines to electricity supply networks in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, P. [Garrad Hassan & Partners Ltd., Glasgow (United Kingdom)

    1996-12-31

    This paper reviews some technical and commercial issues now topical for wind energy developments in Europe. The technical issues are important because of the weak nature of the existing electricity systems in rural or upland areas. Several commercial issues are considered which may improve the economics of wind energy as market incentives are gradually withdrawn. 9 refs.

  20. TECHNICAL CULTURE AND HUMAN AXJOSPHERE

    Directory of Open Access Journals (Sweden)

    ­Krystyna Chałas

    2014-11-01

    Full Text Available Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person lives and works. It is mainly about the answer to the question of which values of technical culture are closely related to and what are the inter dependencies? The primary task is to define the concept of the technical culture and to show its teaching essence. The second task boils down to indicate the range of values ​​inherent in the culture of technology, determining the value of the technological culture and values, which are developed by the technical culture. Indication of the interaction between the technical culture and values ​​is the third task.