Sample records for santa monica fault
-
Fisher, M.A.; Normark, W.R.; Bohannon, R.G.; Sliter, R.W.; Calvert, A.J.
2003-01-01
We interpret seismic-reflection data, which were collected in Santa Monica Bay using a 70-in3 generator-injector air gun, to show the geologic structure of the continental shelf and slope and of the deep-water, Santa Monica and San Pedro Basins. The goal of this research is to investigate the earthquake hazard posed to urban areas by offshore faults. These data reveal that northwest of the Palos Verdes Peninsula, the Palos Verdes Fault neither offsets the seafloor nor cuts through an undeformed sediment apron that postdates the last sea level rise. Other evidence indicates that this fault extends northwest beneath the shelf in the deep subsurface. However, other major faults in the study area, such as the Dume and San Pedro Basin Faults, were active recently, as indicated by an arched seafloor and offset shallow sediment. Rocks under the lower continental slope are deformed to differing degrees on opposite sides of Santa Monica Canyon. Northwest of this canyon, the continental slope is underlain by a little-deformed sediment apron; the main structures that deform this apron are two lower-slope anticlines that extend toward Point Dume and are cored by faults showing reverse or thrust separation. Southeast of Santa Monica Canyon, lower-slope rocks are deformed by a complex arrangement of strike-slip, normal, and reverse faults. The San Pedro Escarpment rises abruptly along the southeast side of Santa Monica Canyon. Reverse faults and folds underpinning this escarpment steepen progressively southeastward. Locally they form flower structures and cut downward into basement rocks. These faults merge downward with the San Pedro Basin fault zone, which is nearly vertical and strike slip. The escarpment and its attendant structures diverge from this strike-slip fault zone and extend for 60 km along the margin, separating the continental shelf from the deep-water basins. The deep-water Santa Monica Basin has large extent but is filled with only a thin (less than 1.5-km
-
Geomorphology, acoustic backscatter, and processes in Santa Monica Bay from multibeam mapping.
Gardner, James V; Dartnell, Peter; Mayer, Larry A; Hughes Clarke, John E
2003-01-01
Santa Monica Bay was mapped in 1996 using a high-resolution multibeam system, providing the first substantial update of the submarine geomorphology since the initial compilation by Shepard and Emery [(1941) Geol. Soc. Amer. Spec. Paper 31]. The multibeam mapping generated not only high-resolution bathymetry, but also coregistered, calibrated acoustic backscatter at 95 kHz. The geomorphology has been subdivided into six provinces; shelf, marginal plateau, submarine canyon, basin slope, apron, and basin. The dimensions, gradients, and backscatter characteristics of each province is described and related to a combination of tectonics, climate, sea level, and sediment supply. Fluctuations of eustatic sea level have had a profound effect on the area; by periodically eroding the surface of Santa Monica plateau, extending the mouth of the Los Angeles River to various locations along the shelf break, and by connecting submarine canyons to rivers. A wetter glacial climate undoubtedly generated more sediment to the rivers that then transported the increased sediment load to the low-stand coastline and canyon heads. The trends of Santa Monica Canyon and several bathymetric highs suggest a complex tectonic stress field that has controlled the various segments. There is no geomorphic evidence to suggest Redondo Canyon is fault controlled. The San Pedro fault can be extended more than 30 km to the northwest by the alignment of a series of bathymetric highs and abrupt changes in direction of channel thalwegs.
-
A comparison of municipal forest benefits and costs in Modesto and Santa Monica, California, U.S.A
E.G. McPherson; J.R. Simpson
2002-01-01
This paper presents a comparison of the structure, function, and value of street and park tree populations in two California cities. Trees provided net annual benefits valued at $ 2.2 million in Modesto and $805, 732 in Santa Monica. Benefit-cost ratios were 1.85:1 and 1.52:1 in Modesto and Santa Monica, respectively. Residents received $1.85 and $1.52 in annual...
-
Ross, Stephanie L.; Lee, Homa J.; Parsons, Tom E.; Beyer, Larry A.; Boore, David M.; Conrad, James E.; Edwards, Brian D.; Fisher, Michael A.; Frankel, Arthur D.; Geist, Eric L.; Hudnut, Kenneth W.; Hough, Susan E.; Kayen, Robert E.; Lorenson, T.D.; Luco, Nicolas; McCrory, Patricia A.; McGann, Mary; Nathenson, Manuel; Nolan, Michael; Petersen, Mark D.; Ponti, Daniel J.; Powell, Charles L.; Ryan, Holly F.; Tinsley, John C.; Wills, Chris J.; Wong, Florence L.; Xu, Jingping
2008-01-01
In a letter to the U.S. Geological Survey (USGS) dated March 25, 2008, Representative Jane Harman (California 36th district) requested advice on geologic hazards that should be considered in the review of a proposed liquefied natural gas (LNG) facility off the California coast in Santa Monica Bay. In 2004, the USGS responded to a similar request from Representative Lois Capps, regarding two proposed LNG facilities offshore Ventura County, Calif., with a report summarizing potential geologic and seismic hazards (Ross and others, 2004). The proposed LNG Deepwater Port (DWP) facility includes single point moorings (SPMs) and 35 miles of underwater pipelines. The DWP submersible buoys, manifolds, and risers would be situated on the floor of the southern Santa Monica Basin, in 3,000 feet of water, about 23 miles offshore of the Palos Verdes Peninsula. Twin 24-inch diameter pipelines would extend northeastward from the buoys across the basin floor, up the basin slope and across the continental shelf, skirting north around the Santa Monica submarine canyon. Figure 1 provides locations of the project and geologic features. Acronyms are defined in table 1. This facility is being proposed in a region of known geologic hazards that arise from both the potential for strong earthquakes and geologic processes related to sediment transport and accumulation in the offshore environment. The probability of a damaging earthquake (considered here as magnitude 6.5 or greater) in the next 30 years within about 30 miles (50 km) of the proposed pipeline ranges from 16% at the pipeline's offshore end to 48% where it nears land (Petersen, 2008). Earthquakes of this magnitude are capable of producing strong shaking, surface fault offsets, liquefaction phenomena, landslides, underwater turbidity currents and debris flow avalanches, and tsunamis. As part of the DWP license application for the Woodside Natural Gas proposal in Santa Monica Bay (known as the OceanWay Secure Energy Project), Fugro
-
Early and School-Age Care in Santa Monica: Current System, Policy Options, and Recommendations
Pierson, Ashley; Karoly, Lynn A.; Zellman, Gail L.; Beckett, Megan K.
2014-01-01
The landscape of early learning and out-of-school-time programs in the City of Santa Monica is complex, with numerous providers and funding streams. This complexity reflects its evolution in response to changes in federal, state, and local priorities and initiatives. Future shifts in funding levels, program auspices, and other features are likely.…
-
The geological setting of Santa Monica and San Pedro Basins, California Continental Borderland
Gorsline, D. S.
The California Continental Borderland's present configuration dates from about 4 to 5 × 10 6 years before present (BP) and is the most recent of several configuration of the southern California margin that have evolved after the North America plate over-rode the East Pacific Rise about 30 × 10 6 years ago. The present morphology is a series of two to three northwest-southeast trending rows of depressions separated by banks and insular ridges. Two inner basins, Santa Monica and San Pedro, have been the site for the California Basin Study (CaBs), funded by the US Department of Energy. The Santa Monica and San Pedro Basins contain post-Miocene sediment thicknesses of about 2.5 and 1.5 km respectively. During the Holocene (past 10,000 years) about 10-12m have accumulated. The sediment entered the basin by one or a combination of processes including particle infall (mainly as bioaggregates) from surface waters, from nepheloid plumes (surface, mid-depth and near-bottom), from turbidity currents, mass movements, and to a very minor degree direct precipitation. In Santa Monica Basin, during the last century, particle infall nepheloid plume transport have been the most common processes. The former process has been dominant in thecentral basin at water depths from 900-945m, where characteristic silt-clay is found with a typical mean particle diameter of about 0.0006mm ( φ standard deviation = 2; φ skewness near zero). Kurtosis is typically 2 (platykurtic); these values indicate broad, near-log normal particle size distributions. The calcium carbonate content averages about 10% and organic carbon about 4%. Surficial sediment bulk densities are 1.1-1.2 and accumulation rates range from 16-30mg cm -2Yr 1 in this central fine deposit. Bottom water oxygen contents are at or below 0.1 ml 1 -1 so that bioturbation is inhibited, thus preserving the primary sedimentary stratification. There appear to be annual varves, but the laminae couplets are not simple wet-dry season pairs
-
Digital single-channel seismic-reflection data from western Santa Monica basin
Normark, William R.; Piper, David J.W.; Sliter, Ray W.; Triezenberg, Peter; Gutmacher, Christina E.
2006-01-01
During a collaborative project in 1992, Geological Survey of Canada and United States Geological Survey scientists obtained about 850 line-km of high-quality single-channel boomer and sleeve-gun seismic-reflection profiles across Hueneme, Mugu and Dume submarine fans, Santa Monica Basin, off southern California. The goals of this work were to better understand the processes that lead to the formation of sandy submarine fans and the role of sea-level changes in controlling fan development. This report includes a trackline map of the area surveyed, as well as images of the sleeve-gun profiles and the opportunity to download both images and digital data files (SEG-Y) of all the sleeve-gun profiles.
-
Wilshire fault: Earthquakes in Hollywood?
Hummon, Cheryl; Schneider, Craig L.; Yeats, Robert S.; Dolan, James F.; Sieh, Kerry E.; Huftile, Gary J.
1994-04-01
The Wilshire fault is a potentially seismogenic, blind thrust fault inferred to underlie and cause the Wilshire arch, a Quaternary fold in the Hollywood area, just west of downtown Los Angeles, California. Two inverse models, based on the Wilshire arch, allow us to estimate the location and slip rate of the Wilshire fault, which may be illuminated by a zone of microearthquakes. A fault-bend fold model indicates a reverse-slip rate of 1.5-1.9 mm/yr, whereas a three-dimensional elastic-dislocation model indicates a right-reverse slip rate of 2.6-3.2 mm/yr. The Wilshire fault is a previously unrecognized seismic hazard directly beneath Hollywood and Beverly Hills, distinct from the faults under the nearby Santa Monica Mountains.
-
Early Neogene unroofing of the Sierra Nevada de Santa Marta along the Bucaramanga -Santa Marta Fault
Piraquive Bermúdez, Alejandro; Pinzón, Edna; Bernet, Matthias; Kammer, Andreas; Von Quadt, Albrecht; Sarmiento, Gustavo
2016-04-01
Plate interaction between Caribbean and Nazca plates with Southamerica gave rise to an intricate pattern of tectonic blocks in the Northandean realm. Among these microblocks the Sierra Nevada de Santa Marta (SNSM) represents a fault-bounded triangular massif composed of a representative crustal section of the Northandean margin, in which a Precambrian to Late Paleozoic metamorphic belt is overlain by a Triassic to Jurassic magmatic arc and collateral volcanic suites. Its western border fault belongs to the composite Bucaramanga - Santa Marta fault with a combined left lateral-normal displacement. SE of Santa Marta it exposes remnants of an Oligocene marginal basin, which attests to a first Cenoizoic activation of this crustal-scale lineament. The basin fill consists of a sequence of coarse-grained cobble-pebble conglomerates > 1000 m thick that unconformably overlay the Triassic-Jurassic magmatic arc. Its lower sequence is composed of interbedded siltstones; topwards the sequence becomes dominated by coarser fractions. These sedimentary sequences yields valuable information about exhumation and coeval sedimentation processes that affected the massif's western border since the Upper Eocene. In order to analyse uplifting processes associated with tectonics during early Neogene we performed detrital zircon U-Pb geochronology, detrital thermochronology of zircon and apatites coupled with the description of a stratigraphic section and its facies composition. We compared samples from the Aracataca basin with analog sequences found at an equivalent basin at the Oca Fault at the northern margin of the SNSM. Our results show that sediments of both basins were sourced from Precambrian gneisses, along with Mesozoic acid to intermediate plutons; sedimentation started in the Upper Eocene-Oligocene according to palynomorphs, subsequently in the Upper Oligocene a completion of Jurassic to Cretaceous sources was followed by an increase of Precambrian input that became the dominant
-
Yerkes, R.F.; Wentworth, Carl M.
1965-01-01
The Corral Canyon nuclear power plant site consists of about 305 acres near the mouth of Corral Canyon in the central Santa Monica Mountains; it is located on an east-trending segment of the Pacific Coast between Point Dume and Malibu Canyon, about 28 miles due west of Los Angeles. The Santa Monica Mountains are the southwesternmost mainland part of the Transverse Ranges province, the east-trending features of which transect the otherwise relatively uniform northwesterly trend of the geomorphic and geologic features of coastal California. The south margin of the Transverse Ranges is marked by the Santa Monica fault system, which extends eastward near the 34th parallel for at least 145 miles from near Santa Cruz Island to the San Andreas fault zone. In the central Santa Monica Mountains area the Santa Monica fault system includes the Malibu Coast fault and Malibu Coast zone of deformation on the north; from the south it includes an inferred fault--the Anacapa fault--considered to follow an east-trending topographic escarpmemt on the sea floor about 5 miles south of the Malibu Coast fault. The low-lying terrain south of the fault system, including the Los Angeles basin and the largely submerged Continental Borderland offshore, are dominated by northwest-trending structural features. The Malibu Coat zone is a wide, east-trending band of asymmetrically folded, sheared, and faulted bedrock that extends for more than 20 miles along the north margin of the Santa Monica fault system west of Santa Monica. Near the north margin of the Malibu Coast zone the north-dipping, east-trending Malibu Coast fault juxtaposes unlike, in part contemporaneous sedimentary rock sections; it is inferred to be the near-surface expression of a major crustal boundary between completely unrelated basement rocks. Comparison of contemporaneous structural features and stratigraphic sections (Late Cretaceous to middle Miocene sedimentary, rocks and middle Miocene volcanic and intrusive igneous rocks
-
International Nuclear Information System (INIS)
Huh, Chih-An
1995-01-01
Distribution and flux of 234 Th, 232 Th and 230 Th in the water column of central Santa Monica basin observed over a period of seven years show seasonal and interannual variabilities. A steady-state model is applied to the integrated data to calculate long term average flux and model rate constants of Th isotopes. Mass balance calculations show that the basin acts like a closed system for short-lived 234 Th, but not for the long-lived isotopes 230 Th and 232 Th. Most 230 Th in the basin is transported from elsewhere. Of the incoming Th, 40-55% of the 230 Th and 14-26% of the 232 Th enter the surface water in dissolved form. In the upper 100m, the residence time of dissolved Th with respect to adsorption onto suspended particulates, 70-80 days, is about one order of magnitude higher than the residence time of suspended particles with respect to aggregation into sinking particles, 7-10 days. (author)
-
Romans, B.W.; Normark, W.R.; McGann, M.M.; Covault, J.A.; Graham, S.A.
2009-01-01
Utilizing accumulations of coarse-grained terrigenous sediment from deep-marine basins to evaluate the relative contributions of and history of controls on sediment flux through a source-to-sink system has been difficult as a result of limited knowledge of event timing. In this study, six new radiocarbon (14C) dates are integrated with five previously published dates that have been recalibrated from a 12.5-m-thick turbidite section from Ocean Drilling Program (ODP) Site 1015 in Santa Monica Basin, offshore California. This borehole is tied to high-resolution seismic-reflection profiles that cover an 1100 km2 area of the middle and lower Hueneme submarine fan and most of the basin plain. The resulting stratigraphic framework provides the highest temporal resolution for a thick-bedded Holocene turbidite succession to date, permitting an evaluation of source-to-sink controls at millennial (1000 yr) scales. The depositional history from 7 ka to present indicates that the recurrence interval for large turbidity-current events is relatively constant (300-360 yr), but the volume of sediment deposited on the fan and in the basin plain has increased by a factor of 2 over this period. Moreover, the amount of sand per event on the basin plain during the same interval has increased by a factor of 7. Maps of sediment distribution derived from correlation of seismic-reflection profiles indicate that this trend cannot be attributed exclusively to autogenic processes (e.g., progradation of depocenters). The observed variability in sediment accumulation rates is thus largely controlled by allogenic factors, including: (1) increased discharge of Santa Clara River as a result of increased magnitude and frequency of El Ni??o-Southern Oscillation (ENSO) events from ca. 2 ka to present, (2) an apparent change in routing of coarse-grained sediment within the staging area at ca. 3 ka (i.e., from direct river input to indirect, littoral cell input into Hueneme submarine canyon), and (3
-
Energy Technology Data Exchange (ETDEWEB)
Kreykenbohm, S.
2007-07-01
In April 2006, a domestic building consisting of eleven prefabricated steel modules and designed by architect Ralf Kappes was constructed at Santa Monica, California, within just eight hours. The two-storey building has a living area of 230 square metres. Rooms are open, with versetzte Ebenen.. The climate of the Los Angeles region is warm, with a constant sea breeze. The building is designed for natural ventilation, and no air conditioning system is required. If it gets too hot, warm air will be withdrawn by a blower in the upper Treppenhaus. In the winter season, the sun shines right into the interior of the building, where solar heat is stored and then slowly released by the concrete floor. A PV system on the roof generates 75 percent of the electric power required, and there is also a solar thermal power system for water heating. The building was awarded the LEED Platinum Award (Leadership in Energy and Environmental Design). (orig.) [German] Im April 2006 verfolgten zahlreiche Schaulustige, wie aus elf vorfabrizierten Stahlmodulen innerhalb von acht Stunden ein Wohnhaus entstand. Das Modulsystem stammt aus der Feder des Architekten Kappes. Die Stahlrahmenmodule bilden ein zweigeschossiges Wohnhaus mit 230 qm Wohnflaeche. Grosszuegige Luftraeume und versetzte Ebenen im Wohnbereich sowie zahlreiche Ein- und Ausblicke praegen die Architektur auf dem kompakten Hanggrundstueck in der Naehe des pazifischen Ozeans. Im warmen Klima von Los Angeles weht hier stets der Wind vom Meer. Das Haus ist so konzipiert, dass man sehr gut quer lueften kann. Es benoetigt keine Klimaanlage. Bei allzu grosser Hitze saugt ein Ventilator oben im Treppenhaus warme Luft ab. Im Winter reicht die tief stehende Sonne bis ins Hausinnnere. So kann die Sonnenwaerme vom Betonboden gespeichert und langsam abgegeben werden. Auf dem Dach erzeugt eine Photovoltaikanlage 75% des Strombedarfs. Ausserdem gibt es dort eine Solarthermieanlage fuer die Wasserversorgung. Dafuer erhielt das Wohnhaus die
-
Energy Technology Data Exchange (ETDEWEB)
Yu, Lei.
1991-12-16
Samples from three time-series sediment traps deployed in the Santa Monica Basin off the California coast were analyzed to study the flux and scavenging of uranium and thorium series isotopes. Variations of uranium and thorium series isotopes fluxes in the water column were obtained by integrating these time-series deployment results. Mass and radionuclide fluxes measured from bottom sediment traps compare favorably with fluxed determined from sediment core data. This agreement suggests that the near-bottom sediment traps are capable of collecting settling particles representative of the surface sediment. The phase distributions of {sup 234}Th in the water column were calculated by an inverse method using sediment trap data, which help to study the variations of {sup 234}Th scavenging in the water column. Scavenging and radioactive decay of {sup 234}Th are the two principal processes for balancing {sup 234}Th budget in the water column. The residence times of dissolved and particulate {sup 234}Th were determined by a {sup 234}Th scavenging model.
-
Energy Technology Data Exchange (ETDEWEB)
Yu, Lei [Oregon State Univ., Corvallis, OR (United States)
1991-12-16
Samples from three time-series sediment traps deployed in the Santa Monica Basin off the California coast were analyzed to study the flux and scavenging of uranium and thorium series isotopes. Variations of uranium and thorium series isotopes fluxes in the water column were obtained by integrating these time-series deployment results. Mass and radionuclide fluxes measured from bottom sediment traps compare favorably with fluxed determined from sediment core data. This agreement suggests that the near-bottom sediment traps are capable of collecting settling particles representative of the surface sediment. The phase distributions of 234Th in the water column were calculated by an inverse method using sediment trap data, which help to study the variations of 234Th scavenging in the water column. Scavenging and radioactive decay of 234Th are the two principal processes for balancing 234Th budget in the water column. The residence times of dissolved and particulate 234Th were determined by a 234Th scavenging model.
-
Evolution of the northern santa cruz mountains by advection of crust past a san andreas fault bend.
Anderson, R S
1990-07-27
The late Quaternary marine terraces near Santa Cruz, California, reflect uplift associated with the nearby restraining bend on the San Andreas fault. Excellent correspondence of the coseismic vertical displacement field caused by the 17 October 1989 magnitude 7.1 Loma Prieta earthquake and the present elevations of these terraces allows calculation of maximum long-term uplift rates 1 to 2 kilometers west of the San Andreas fault of 0.8 millimeters per year. Over several million years, this uplift, in concert with the right lateral translation of the resulting topography, and with continual attack by geomorphic processes, can account for the general topography of the northern Santa Cruz Mountains.
-
Hecker, Suzanne; Langenheim, Victoria; Williams, Robert; Hitchcock, Christopher S.; DeLong, Stephen B.
2016-01-01
Airborne light detection and ranging (lidar) topography reveals for the first time the trace of the Rodgers Creek fault (RCF) through the center of Santa Rosa, the largest city in the northern San Francisco Bay area. Vertical deformation of the Santa Rosa Creek floodplain expresses a composite pull‐apart basin beneath the urban cover that is part of a broader 1‐km‐wide right‐releasing bend in the fault. High‐resolution geophysical data illuminate subsurface conditions that may be responsible for the complex pattern of surface faulting, as well as for the distribution of seismicity and possibly for creep behavior. We identify a dense, magnetic basement body bounded by the RCF beneath Santa Rosa that we interpret as a strong asperity, likely part of a larger locked patch of the fault to the south. A local increase in frictional resistance associated with the basement body appears to explain (1) distributed fault‐normal extension above where the RCF intersects the body; (2) earthquake activity around the northern end of the body, notably the 1969 ML 5.6 and 5.7 events and aftershocks; and (3) creep rates on the RCF that are higher to the north of Santa Rosa than to the south. There is a significant probability of a major earthquake on the RCF in the coming decades, and earthquakes associated with the proposed asperity have the potential to release seismic energy into the Cotati basin beneath Santa Rosa, already known from damaging historical earthquakes to produce amplified ground shaking.
-
Mason, Cody C.; Spotila, James A.; Axen, Gary; Dorsey, Rebecca J.; Luther, Amy; Stockli, Daniel F.
2017-12-01
Low-angle detachment fault systems are important elements of oblique-divergent plate boundaries, yet the role detachment faulting plays in the development of such boundaries is poorly understood. The West Salton Detachment Fault (WSDF) is a major low-angle normal fault that formed coeval with localization of the Pacific-North America plate boundary in the northern Salton Trough, CA. Apatite U-Th/He thermochronometry (AHe; n = 29 samples) and thermal history modeling of samples from the Santa Rosa Mountains (SRM) reveal that initial exhumation along the WSDF began at circa 8 Ma, exhuming footwall material from depths of >2 to 3 km. An uplifted fossil (Miocene) helium partial retention zone is present in the eastern SRM, while a deeper crustal section has been exhumed along the Pleistocene high-angle Santa Rosa Fault (SFR) to much higher elevations in the southwest SRM. Detachment-related vertical exhumation rates in the SRM were 0.15-0.36 km/Myr, with maximum fault slip rates of 1.2-3.0 km/Myr. Miocene AHe isochrons across the SRM are consistent with northeast crustal tilting of the SRM block and suggest that the post-WSDF vertical exhumation rate along the SRF was 1.3 km/Myr. The timing of extension initiation in the Salton Trough suggests that clockwise rotation of relative plate motions that began at 8 Ma is associated with initiation of the southern San Andreas system. Pleistocene regional tectonic reorganization was contemporaneous with an abrupt transition from low- to high-angle faulting and indicates that local fault geometry may at times exert a fundamental control on rock uplift rates along strike-slip fault systems.
-
Temporal and spatial distributions of contaminants in sediments of Santa Monica Bay, California
Bay, S.M.; Zeng, E.Y.; Lorenson, T.D.; Tran, K.; Alexander, Corrine
2003-01-01
Contaminant inputs from wastewater discharge, a major source of contamination to Santa Monica Bay (SMB), have declined drastically during the last three decades as a result of improved treatment processes and better source control. To assess the concomitant temporal changes in the SMB sediments, a study was initiated in June 1997, in which 25 box cores were collected using a stratified random sampling design. Five sediment strata corresponding to the time intervals of 1890-1920, 1932-1963, 1965-1979, 1979-1989, and 1989-1997 were identified using 210Pb dating techniques. Samples from each stratum were analyzed for metals, 1,1,1-Trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and its metabolites (DDTs), polychlorinated biphenyls (PCBs), and total organic carbon (TOC). Samples from the 1965-1979, 1979-1989, and 1989-1997 strata were also analyzed for polycyclic aromatic hydrocarbons (PAHs) and linear alkylbenzenes (LABs). Sediment metal concentrations increased from 1890-1979 and were similar during the time intervals of 1965-1979, 1979-1989, and 1989-1997, although the mass emissions of trace metals from sewage inputs declined substantially during the same time period. Trace organic contamination in SMB was generally highest in sediments corresponding to deposition during the years of 1965-1979 or 1979-1989 and showed a decline in concentration in the 1989-1997 stratum. Temporal trends of contamination were greatest in sediments collected from areas near the Hyperion Treatment Plant (HTP) outfall system and on the slope of Redondo Canyon. The highest contaminant concentrations were present in sediments near the HTP 7-mile outfall in the 1965-1979 stratum. Elevated trace metal and organic concentrations were still present in the 1989-1997 stratum of most stations, suggesting that sediment contaminants have moved vertically in the sediment column since sludge discharges from the 7-mile outfall (a dominant source of contamination to the bay) ceased in 1987. The
-
Impression Management Agnes Monica Melalui Akun Instagram (@Agnezmo)
Alim, Chelsea Amanda
2014-01-01
Penelitian ini dilakukan untuk menganalisa penggunaan taktik manajemen kesan yang dilakukan Agnes Monica melalui akun Instagram (@agnezmo). Agnes Monica sebagai seseorang yang berpengaruh, selalu menjadi bahan perbincangan publik, dan perhatian media sosial, memiliki kesan yang baik, termasuk melalui Instagram. Peneliti menggunakan metode analisis isi kuantitatif untuk menganalisa 45 post foto Instagram Agnes Monica, yang ada pada tanggal 1 Februari 2014 - 1 April 2014. Hasil penelitian ini ...
-
2011-10-05
...) Including On-Site Leased Workers From Interplace, Inc., Apple One and Robert Half Legal Santa Monica, CA...-site leased workers from Interplace, Inc., and Apple One, Santa Monica, California. The workers are... from Interplace, Inc., Apple One and Robert Half Legal, Santa Monica, California, who became totally or...
-
Monica ja Marcel Vichmanni abielus kriis? / Jaanus Hämarsoo
Hämarsoo, Jaanus
2006-01-01
Kuigi tippärimeeste seltskonnas räägitakse AS-i Go Group suuromaniku Marcel Vichmanni ja teleproduktsioonifirma Ruut ühe omaniku Monica Vichmanni abielu kriisist, kinnitab Monica Vichmann, et kuulujuttudel ei ole alust ning lahutuse teemal ei ole nad abikaasaga rääkinud
-
The Modified Bruun Rule Extended for Landward Transport
2013-05-13
Article history : Received 3 January 2013 Received in revised form 24 April 2013 Accepted 28 April 2013 Available online 13 May 2013 Communicated by J.T...profiles in Santa Monica Bay, a. Santa Monica Beach (nourishment in 1947 and 1964); b. Venice Beach (nourishment in 1947 and 1964). Adapted from Leidersdorf...the recent history of Santa Monica Bay. In: Stauble, D.K., Kraus, N.C. (Eds.), Beach Nourishment Engineering and Management Considerations. American
-
Shelf evolution along a transpressive transform margin, Santa Barbara Channel, California
Johnson, Samuel Y.; Hartwell, Stephen; Sorlien, Christopher C.; Dartnell, Peter; Ritchie, Andrew C.
2017-01-01
High-resolution bathymetric and seismic reflection data provide new insights for understanding the post–Last Glacial Maximum (LGM, ca. 21 ka) evolution of the ∼120-km-long Santa Barbara shelf, located within a transpressive segment of the transform continental margin of western North America. The goal is to determine how rising sea level, sediment supply, and tectonics combine to control shelf geomorphology and history. Morphologic, stratigraphic, and structural data highlight regional variability and support division of the shelf into three domains. (1) The eastern Santa Barbara shelf is south of and in the hanging wall of the blind south-dipping Oak Ridge fault. The broad gently dipping shelf has a convex-upward shape resulting from thick post-LGM sediment (mean = 24.7 m) derived from the Santa Clara River. (2) The ∼5–8-km-wide Ventura Basin obliquely crosses the shelf and forms an asymmetric trough with thick post-LGM sediment fill (mean = 30.4 m) derived from the Santa Clara and Ventura Rivers. The basin is between and in the footwalls of the Oak Ridge fault to the south and the blind north-dipping Pitas Point fault to the north. (3) The central and western Santa Barbara shelf is located north of and in the hanging wall of the North Channel–Pitas Point fault system. The concave-up shape of the shelf results from folding, marine erosion, and the relative lack of post-LGM sediment cover (mean = 3.8 m). Sediment is derived from small steep coastal watersheds and largely stored in the Gaviota bar and other nearshore mouth bars. Three distinct upper slope morphologies result from a mix of progradation and submarine landsliding.Ages and rates of deformation are derived from a local sea-level-rise model that incorporates an inferred LGM shoreline angle and the LGM wave-cut platform. Post-LGM slip rates on the offshore Oak Ridge fault are a minimum of 0.7 ± 0.1 mm/yr. Slip rates on the Pitas Point fault system are a minimum of 2.3 ± 0.3 mm
-
Incidence of myocardial infarction in the Danish MONICA population 1982-1991
DEFF Research Database (Denmark)
Kirchhoff, M; Davidsen, M; Brønnum-Hansen, H
1999-01-01
BACKGROUND: Cardiovascular mortality has been declining in Denmark over the past 20 years. Trends in incidence of myocardial infarction (MI) over the period 1982-1991 are described within the framework of the World Health Organization MONICA Project. METHODS: The DAN-MONICA heart register included...
-
75 FR 39955 - Certificate of Alternative Compliance for the Offshore Supply Vessel MONICA W CALLAIS
2010-07-13
... Compliance for the Offshore Supply Vessel MONICA W CALLAIS AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY... supply vessel MONICA W CALLAIS as required by 33 U.S.C. 1605(c) and 33 CFR 81.18. DATES: The Certificate..., Parts 81 and 89, has been issued for the offshore supply vessel MONICA W CALLAIS, O.N. 1226851. The...
-
Sensemaking: A Structure for an Intelligence Revolution
2011-03-01
is Assessing the Tradecraft of Intelligence Analysis (with C. Bryan Gabbard ), TR-293 (Santa Monica, CA: RAND Corporation, 2008). xiii COMMENTARY...Gregory F. and C. Bryan Gabbard . Assessing the Tradecraft of Intelligence Analysis. TR-293. Santa Monica, CA: RAND Corporation, 2008. Tsouras, Peter G
-
Monica del Norte - Eesti maalikunstnik päikeselises Hispaanias / Anne-Mari Alver
Alver, Anne-Mari
2006-01-01
Deivi Oru alias Monica del Norte eneseleidmisest maalikunstniku, sisekujundaja ja kunstiõpetajana Hispaanias. Kunstnik teeb oma maalidele ise raamid. Koos abikaasa Alaniga on ta soetanud Räpina lähistele talukoha, millest tulevikus peaks saama näituste ja kunstilaagrite paik. 26. augustini on Monica del Norte maalid väljas Artdepoo galeriis
-
1980-12-01
staff of Dikewood, Santa Monica, no. only has contributed a large amount of material to this document, but also proofread the typescript . In...assistance and skills in the preparation of the entire typescript . Dikewood Industries, Inc. K.S.H. LEE Santa Monica, California September, 1979 xJ
-
77 FR 9672 - Center for Scientific Review; Notice of Closed Meetings
2012-02-17
...: Chemistry, Biochemistry, Biophysics, and Bioengineering. Date: March 9-14, 2012. Time: 11 a.m. to 5 p.m... Drive, Bethesda, MD 20892. Contact Person: Alexander Gubin, Ph.D., Scientific Review Officer, Center for... Santa Monica Hotel, 530 West Pico Boulevard, Santa Monica, CA 90405. Contact Person: Jose H Guerrier, Ph...
-
78 FR 107 - Center for Scientific Review; Notice of Closed Meetings
2013-01-02
... Biochemistry of Membranes. Date: January 23, 2013. Time: 1:00 p.m. to 1:30 p.m. Agenda: To review and evaluate... 20036. Contact Person: Nitsa Rosenzweig, Ph.D., Scientific Review Officer, Center for Scientific Review... Santa Monica Hotel, 530 West Pico Boulevard, Santa Monica, CA 90405. Contact Person: David R. Jollie, Ph...
-
77 FR 77080 - Center for Scientific Review; Notice of Closed Meetings
2012-12-31
... Biochemistry of Membranes. Date: January 23, 2013. Time: 1:00 p.m. to 1:30 p.m. Agenda: To review and evaluate... 20036. Contact Person: Nitsa Rosenzweig, Ph.D., Scientific Review Officer, Center for Scientific Review... Santa Monica Hotel, 530 West Pico Boulevard, Santa Monica, CA 90405. Contact Person: David R. Jollie, Ph...
-
78 FR 66752 - Center for Scientific Review; Amended Notice of Meeting
2013-11-06
... and Imaging Technologies Study Section, October 10, 2013, 07:45 a.m. to October 11, 2013, 06:00 p.m., Sheraton Delfina Santa Monica Hotel, 530 West Pico Boulevard, Santa Monica, CA 90405 which was published in... Renaissance Washington Dupont Circle Hotel, 1143 New Hampshire Ave. NW., Washington, DC 20037. The meeting...
-
Geological Study of Monica Pintado mine. Florida town
International Nuclear Information System (INIS)
Medina, E.; Carrion, R.
1988-01-01
This work is about the geological study carried in Monica Pintado mine in Florida town by photointepretation - scale 1.20.000. In the area were found rocks granites, deep metamorfites and black granite
-
International Nuclear Information System (INIS)
Massabie, A.; Sanguinetti, A.; Nestiero, O.
2007-01-01
From Argentin lake, at west on Andean hills, to Puerto Santa Cruz on Atlantic coast, Santa Cruz river cross eastward Santa Cruz province over 250 km in Patagonia at southern Argentina. Present bed of the river has a meandering outline with first order meanders of great ratio bends and second order meanders of minor ratio bends. Principal wanderings are 45 to 55 km spaced from near Estancia La Julia or Rio Bote at west to Comandante Luis Piedrabuena at east. On river's bed middle sector these great curvatures are located at Estancia Condor Cliff and Estancia Rincon Grande. Regional and partial detailed studies allow to recognize structural control on river's bed sketch and valley s geomorphology that relates first order bends with reactivated principal faults. These faults fit well with parallel system of northwest strike of Austral Basin.On geological, geomorphologic and structural evidences recognized in Santa Cruz river, quaternary tectonic activity, related to Andean movements in southern Patagonian foreland, is postulated. (author)
-
Barcelona - Talent Latent 09 / Ahto Sooaru
Sooaru, Ahto
2010-01-01
Fotonäitusest "Talent Latent 09" Barcelonas Arts Santa Monica kunstikeskuses. Loetletud näitusel eksponeeritud fotode autorid. Pikemalt Rafael Milach'i (sünd. 1978), Lucia Ganieva, Javier Marquerie Thomas'i (sünd. 1986), Amaury da Cunha (sünd. 1976) töödest. Lühidalt ka teistest näitustest Arts Santa Monica kunstikeskuses
-
MONICA - an on-line track following microprocessor in high energy physics experiments
International Nuclear Information System (INIS)
Wermes, N.; Schildt, P.; Stuckenberg, H.J.
1980-02-01
In the storage ring experiments at the PETRA accelerator, large cylindrical detectors with thousands of channels are used. The maximum event rate is 500 000 per second, i.e. effective preprocessing is required. In the TASSO detector this is achieved in two steps: A fast trigger system is able to make within 1 microsecond a decision, whether it is a useful event or not. A positive decision starts an on-line track-following ECL computer together with fast associative memories and table look-up. It is a microprogrammed on-line track analyzer called MONICA, which follows up to 10 tracks within 1 millisecond and calculates the coordinates in the R,phi-plane. CAMAC equipment is used for the input of raw data and the output of the calculated track coordinates, speed of the system is ensured by the computer. An outline of the algorithm used and the features of MONICA are given. As far as we know MONICA is the first running on-line track following free programmable microporcessor used in storage ring experiments. (orig.)
-
Campos-Enriquez, J. O.; Alatorre-Zamora, M. A.; Ramón, V. M.; Belmonte, S.
2014-12-01
Northern Oaxaca terrane, southern Mexico, is bound by the Caltepec and Oaxaca faults to the west and east, respectively. These faults juxtapose the Oaxaca terrane against the Mixteca and Juarez terranes, respectively. The Oaxaca Fault also forms the eastern boundary of the Cenozoic Tehuacan depression. Several gravity profiles across these faults and the Oaxaca terrane (including the Tehuacan Valley) enables us to establish the upper crustal structure of this region. Accordingly, the Oaxaca terrane is downward displaced to the east in two steps. First the Santa Lucia Fault puts into contact the granulitic basamental rocks with Phanerozoic volcanic and sedimentary rocks. Finally, the Gavilan Fault puts into contact the Oaxaca terrane basement (Oaxaca Complex) into contact with the volcano-sedimentary infill of the valley. This gravity study reveals that the Oaxaca Fault system gives rise to a series of east tilted basamental blocks (Oaxaca Complex?). A structural high at the western Tehuacan depression accomadates the east dipping faults (Santa Lucia and Gavilan faults) and the west dipping faults of the Oaxaca Fault System. To the west of this high structural we have the depper depocenters. The Oaxaca Complex, the Caltepec and Santa Lucia faults continue northwestwards beneath Phanerozoic rocks. The faults are regional tectonic structures. They seem to continue northwards below the Trans-Mexican Volcanic Belt. A major E-W to NE-SW discontinuity on the Oaxaca terrane is inferred to exist between profiles 1 and 2. The Tehuacan Valley posses a large groundwater potential.
-
Stanley, Richard G.; Jachens, Robert C.; Lillis, Paul G.; McLaughlin, Robert J.; Kvenvolden, Keith A.; Hostettler, Frances D.; McDougall, Kristin A.; Magoon, Leslie B.
2002-01-01
Gravity anomalies, historical records of exploratory oil wells and oil seeps, new organic-geochemical results, and new stratigraphic and structural data indicate the presence of a concealed, oil-bearing sedimentary basin beneath a highly urbanized part of the Santa Clara Valley, Calif. A conspicuous isostatic-gravity low that extends about 35 km from Palo Alto southeastward to near Los Gatos reflects an asymmetric, northwest-trending sedimentary basin comprising low-density strata, principally of Miocene age, that rest on higher-density rocks of Mesozoic and Paleogene(?) age. Both gravity and well data show that the low-density rocks thin gradually to the northeast over a distance of about 10 km. The thickest (approx 4 km thick) accumulation of low-density material occurs along the basin's steep southwestern margin, which may be controlled by buried, northeast-dipping normal faults that were active during the Miocene. Movement along these hypothetical normal faults may been contemporaneous (approx 17–14 Ma) with sedimentation and local dacitic and basaltic volcanism, possibly in response to crustal extension related to passage of the northwestward-migrating Mendocino triple junction. During the Pliocene and Quaternary, the normal faults and Miocene strata were overridden by Mesozoic rocks, including the Franciscan Complex, along northeastward-vergent reverse and thrust faults of the Berrocal, Shannon, and Monte Vista Fault zones. Movement along these fault zones was accompanied by folding and tilting of strata as young as Quaternary and by uplift of the modern Santa Cruz Mountains; the fault zones remain seismically active. We attribute the Pliocene and Quaternary reverse and thrust faulting, folding, and uplift to compression caused by local San Andreas Fault tectonics and regional transpression along the Pacific-North American Plate boundary. Near the southwestern margin of the Santa Clara Valley, as many as 20 exploratory oil wells were drilled between 1891
-
LUMIS: A Land Use Management Information System for urban planning
Paul, C. K.
1975-01-01
The Land Use Management Information System (LUMIS) consists of a methodology of compiling land use maps by means of air photo interpretation techniques, digitizing these and other maps into machine-readable form, and numerically overlaying these various maps in two computer software routines to provide land use and natural resource data files referenced to the individual census block. The two computer routines are the Polygon Intersection Overlay System (PIOS) and an interactive graphics APL program. A block referenced file of land use, natural resources, geology, elevation, slope, and fault-line items has been created and supplied to the Los Angeles Department of City Planning for the City's portion of the Santa Monica Mountains. In addition, the interactive system contains one hundred and seventy-three socio-economic data items created by merging the Third Count U.S. Census Bureau tapes and the Los Angeles County Secured Assessor File. This data can be graphically displayed for each and every block, block group, or tract for six test tracts in Woodland Hills, California. Other benefits of LUMIS are the knowledge of air photo availability, flight pattern coverage and frequencies, and private photogrammetry companies flying Southern California, as well as a formal Delphi study of relevant land use informational needs in the Santa Monicas.
-
MONICA - a programmable microprocessor for track recognition in an e+e- experiment at PETRA
International Nuclear Information System (INIS)
Schildt, P.; Stuckenberg, H.J.; Wermes, N.
1981-01-01
The microprocessor device MONICA is used in the TASSO experiment at PETRA. Its task is to reconstruct events in the cylindrical driftchamber on-line. Used as an event filter MONICA provides a 2 prong trigger without any further requirements. The speed of the processor (event reconstruction times must be in the order of 1 ms) is achieved by a 4 x 4 bit slice processor in ECL technology, content addressable memories and table look up. The track finding efficiency is 80%. (orig.)
-
DEFF Research Database (Denmark)
Gerdes, L U; Brønnum-Hansen, H; Madsen, Mette
2001-01-01
INTRODUCTION: The incidence rate of a first myocardial infarction declined 3-5% annually in the Danish WHO MONICA population in the period from 1982 to 1991. The aim of this study was to investigate whether levels of the most commonly considered biological traits associated with cardiovascular risk...... mass indices in men, diastolic blood pressures in men risk factors in the Danish WHO MONICA study population did not show trends during the 1980s that contribute...
-
Remotely Piloted Innovation: Terrorism, Drones and Supportive Technology
2016-10-01
Michael Jenkins , most of “today’s terrorists want a lot of people watching and a lot of people dead.”1 To accomplish these objectives, and to outbid...Michael Jenkins , The New Age of Terrorism (Santa Monica, CA: RAND Corporation, 2006), p. 119. 2 For example, see “Iraq Sees Worst Bombing Since...see Henry H. Willis et al., Estimating Terrorism Risk (Santa Monica, CA: RAND Corporation, 2005); and John A. Major, “Advanced Techniques for Modeling
-
Ponti, Daniel J.; Wells, Ray E.
1991-01-01
The Ms 7.1 Loma Prieta earthquake of 18 October 1989 produced abundant ground ruptures in an 8 by 4 km area along Summit Road and Skyland Ridge in the Santa Cruz Mountains. Predominantly extensional fissures formed a left-stepping, crudely en echelon pattern along ridges of the hanging-wall block southwest of the San Andreas fault, about 12 km northwest of the epicenter. The fissures are subparallel to the San Andreas fault and appear to be controlled by bedding planes, faults, joints, and other weak zones in the underlying Tertiary sedimentary strata of the hanging-wall block. The pattern of extensional fissures is generally consistent with tectonic extension across the crest of the uplifted hanging-wall block. Also, many displacements in Laurel Creek canyon and along the San Andreas and Sargent faults are consistent with right-lateral reverse faulting inferred for the mainshock. Additional small tensile failures along the axis of the Laurel anticline may reflect growth of the fold during deep-seated compression. However, the larger ridge-top fissures commonly have displacements that are parallel to the north-northeast regional slope directions and appear inconsistent with east-northeast extension expected from this earthquake. Measured cumulative displacements across the ridge crests are at least 35 times larger than that predicted by the geodetically determined surface deformation. These fissures also occur in association with ubiquitous landslide complexes that were reactivated by the earthquake to produce the largest concentration of co-seismic slope failures in the epicentral region. The anomalously large displacements and the apparent slope control of the geometry and displacement of many co-seismic surface ruptures lead us to conclude that gravity is an important driving force in the formation of the ridge-top fissures. Shaking-induced gravitational spreading of ridges and downslope movement may account for 90¿ or more of the observed displacements on
-
Directory of Open Access Journals (Sweden)
José M. Baena-Díez
2009-12-01
Full Text Available Objetivo: Estudiar la validez del cuestionario cardiovascular Multinational Monitoring of Trends and Determinants in Cardiovascular Disease (MONICA comparado con la historia clínica. Métodos: Estudio descriptivo, prospectivo, multicéntrico, realizado en 3.329 personas >50 años de edad (estudio ARTPER [arteriografía periférica]. La muestra se seleccionó por muestreo aleatorio simple en 32 centros de salud de atención primaria. Los diagnósticos considerados fueron: infarto agudo de miocardio, ángor, enfermedad vascular cerebral, hipertensión arterial, diabetes mellitus e hipercolesterolemia. Se estudió además el tratamiento con antihipertensivos, hipolipemiantes o insulina, hipoglucemiantes y antiagregantes o anticoagulantes. La validez entre cuestionario y registro en la historia clínica se estudió con la sensibilidad, la especificidad, los valores predictivos y el índice kappa. Resultados: La edad media fue de 65 años (desviación estándar: 8,9, y el 54,8% eran mujeres. La sensibilidad del cuestionario fue >90% en todas las variables, excepto en el ángor (89,9% y la enfermedad vascular cerebral (86,5%. La especificidad también fue >90%, excepto en el ángor (88,3% y la hipercolesterolemia (77,5%. El valor predictivo positivo fue >90% en todos los tratamientos farmacológicos; >80% en el ángor, el infarto agudo de miocardio y la hipertensión arterial; 79,4% en la enfermedad vascular cerebral; 79,1% en la hipercolesterolemia, y 73,4% en la diabetes mellitus. Los valores predictivos negativos fueron >90% en todos los casos. Los índices kappa fueron >0,80 en todas las variables, excepto en la hipercolesterolemia (0,69 y la diabetes mellitus (0,79. Conclusiones: El cuestionario cardiovascular MONICA es un método válido para encuestar a las personas >50 años sobre sus enfermedades, factores de riesgo y tratamientos cardiovasculares.Objective: To assess the validity of the questionnaire Multinational Monitoring of Trends and
-
National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...
-
Directory of Open Access Journals (Sweden)
Kelma Patrícia Souza
2017-09-01
Full Text Available Libraries are vital to the social, cultural, and environmental development of the communities where they are located. This paper aimed: to investigate sustainable actions adopted by a reference library in the country; to compare those sustainable actions with actions already developed in Biblioteca Central Santa Mônica - BCMON (Santa Mônica Central Library; to propose actions and projects for BCMON, which will possibly provide library users and staff with an all-embracing, participatory, accessible, and environmentally- minded work and study center. The methodology had a qualitative approach, of exploratory nature, by means of bibliographic gathering, by field research (semi-structured interview, by the analysis of the data identified in bibliographic research and by a survey conducted from the websites of the main Brazilian federal university libraries, regarding sustainable actions and the emphasis on sustainability. It is possible to verify that social and economic sustainability is subtly applied, through the access to information, through social and digital inclusion and the return of the investments received, to the society in the offer of products and services. However, the care for the environment and the practice of environmental education are still neglected. The final product was constructed by an initial proposal with some indications to promote sustainability in BCMOM, which will be based on the dialogue in search of environmental awareness and the participation of the whole staff and communities in a voluntary, democratic, and autonomous way.
-
Bultman, Mark W.; Page, William R.
2016-10-31
The upper Santa Cruz Basin is an important groundwater basin containing the regional aquifer for the city of Nogales, Arizona. This report provides data and interpretations of data aimed at better understanding the bedrock morphology and structure of the upper Santa Cruz Basin study area which encompasses the Rio Rico and Nogales 1:24,000-scale U.S. Geological Survey quadrangles. Data used in this report include the Arizona Aeromagnetic and Gravity Maps and Data referred to here as the 1996 Patagonia Aeromagnetic survey, Bouguer gravity anomaly data, and conductivity-depth transforms (CDTs) from the 1998 Santa Cruz transient electromagnetic survey (whose data are included in appendixes 1 and 2 of this report).Analyses based on magnetic gradients worked well to identify the range-front faults along the Mt. Benedict horst block, the location of possibly fault-controlled canyons to the west of Mt. Benedict, the edges of buried lava flows, and numerous other concealed faults and contacts. Applying the 1996 Patagonia aeromagnetic survey data using the horizontal gradient method produced results that were most closely correlated with the observed geology.The 1996 Patagonia aeromagnetic survey was used to estimate depth to bedrock in the upper Santa Cruz Basin study area. Three different depth estimation methods were applied to the data: Euler deconvolution, horizontal gradient magnitude, and analytic signal. The final depth to bedrock map was produced by choosing the maximum depth from each of the three methods at a given location and combining all maximum depths. In locations of rocks with a known reversed natural remanent magnetic field, gravity based depth estimates from Gettings and Houser (1997) were used.The depth to bedrock map was supported by modeling aeromagnetic anomaly data along six profiles. These cross sectional models demonstrated that by using the depth to bedrock map generated in this study, known and concealed faults, measured and estimated magnetic
-
Paul, C. K.; Landini, A. J.; Diegert, C.
1975-01-01
The Santa Monica mountains of Los Angeles consist primarily of complexly folded sedimentary marine strata with igneous and metamorphic rocks at the eastern end of the mountains. With the increased development of the Santa Monicas, a study was conducted to determine the critical land use data items in the mountains. Two information systems developed in parallel are described. One capitalizes on the City's present computer line printer system, and the second utilizes map overlay techniques on an interactive computer terminal. Results concerning population, housing, and land improvement illustrate the successful linking of ordinal and nominal data files in the interactive system.-
-
77 FR 3478 - Center for Scientific Review; Notice of Closed Meetings
2012-01-24
... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Center for Scientific Review... evaluate grant applications. Place: Sheraton Delfina Santa Monica Hotel, 530 West Pico Boulevard, Santa... Review, National Institutes of Health, 6701 Rockledge Drive, Room 4132, MSC 7802, Bethesda, MD 20892...
-
Hudson, M.R.; Grauch, V.J.S.; Minor, S.A.
2008-01-01
Variations in rock magnetic properties are responsible for the many linear, short-wavelength, low-amplitude magnetic anomalies that are spatially associated with faults that cut Neogene basin sediments in the Rio Grande rift, including the San Ysidro normal fault, which is well exposed in the northern part of the Albuquerque Basin. Magnetic-susceptibility measurements from 310 sites distributed through a 1200-m-thick composite section of rift-filling sediments of the Santa Fe Group and prerift Eocene and Cretaceous sedimentary rocks document large variations of magnetic properties juxtaposed by the San Ysidro fault. Mean volume magnetic susceptibilities generally increase upsection through eight map units: from 1.7 to 2.2E-4 in the prerift Eocene and Cretaceous rocks to 9.9E-4-1.2E-3 in three members of the Miocene Zia Formation of the Santa Fe Group to 1.5E-3-3.5E-3 in three members of the Miocene-Pleistocene Arroyo Ojito Formation of the Santa Fe Group. Rock magnetic measurements and petrography indicate that the amount of detrital magnetite and its variable oxidation to maghemite and hematite within the Santa Fe Group sediments are the predominant controls of their magnetic property variations. Magnetic susceptibility increases progressively with sediment grain size within the members of the Arroyo Ojito Formation (deposited in fluvial environments) but within members of the Zia Formation (deposited in mostly eolian environments) reaches highest values in fine to medium sands. Partial oxidation of detrital magnetite is spatially associated with calcite cementation in the Santa Fe Group. Both oxidation and cementation probably reflect past flow of groundwater through permeable zones. Magnetic models for geologic cross sections that incorporate mean magnetic susceptibilities for the different stratigraphic units mimic the aeromagnetic profiles across the San Ysidro fault and demonstrate that the stratigraphic level of dominant magnetic contrast changes with
-
Parsons, T.; Stein, R.S.; Simpson, R.W.; Reasenberg, P.A.
1999-01-01
We present a new three-dimensional inventory of the southern San Francisco Bay area faults and use it to calculate stress applied principally by the 1989 M = 7.1 Loma Prieta earthquake and to compare fault seismicity rates before and after 1989. The major high-angle right-lateral faults exhibit a different response to the stress change than do minor oblique (right-lateral/thrust) faults. Seismicity on oblique-slip faults in the southern Santa Clara Valley thrust belt increased where the faults were unclamped. The strong dependence of seismicity change on normal stress change implies a high coefficient of static friction. In contrast, we observe that faults with significant offset (>50-100 km) behave differently; microseismicity on the Hayward fault diminished where right-lateral shear stress was reduced and where it was unclamped by the Loma Prieta earthquake. We observe a similar response on the San Andreas fault zone in southern California after the Landers earthquake sequence. Additionally, the offshore San Gregorio fault shows a seismicity rate increase where right-lateral/oblique shear stress was increased by the Loma Prieta earthquake despite also being clamped by it. These responses are consistent with either a low coefficient of static friction or high pore fluid pressures within the fault zones. We can explain the different behavior of the two styles of faults if those with large cumulative offset become impermeable through gouge buildup; coseismically pressurized pore fluids could be trapped and negate imposed normal stress changes, whereas in more limited offset faults, fluids could rapidly escape. The difference in behavior between minor and major faults may explain why frictional failure criteria that apply intermediate coefficients of static friction can be effective in describing the broad distributions of aftershocks that follow large earthquakes, since many of these events occur both inside and outside major fault zones.
-
National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...
-
California State Waters Map Series—Offshore of Santa Cruz, California
Cochrane, Guy R.; Dartnell, Peter; Johnson, Samuel Y.; Erdey, Mercedes D.; Golden, Nadine E.; Greene, H. Gary; Dieter, Bryan E.; Hartwell, Stephen R.; Ritchie, Andrew C.; Finlayson, David P.; Endris, Charles A.; Watt, Janet T.; Davenport, Clifton W.; Sliter, Ray W.; Maier, Katherine L.; Krigsman, Lisa M.; Cochrane, Guy R.; Cochran, Susan A.
2016-03-24
IntroductionIn 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology.The Offshore of Santa Cruz map area is located in central California, on the Pacific Coast about 98 km south of San Francisco. The city of Santa Cruz (population, about 63,000), the largest incorporated city in the map area and the county seat of Santa Cruz County, lies on uplifted marine terraces between the shoreline and the northwest-trending Santa Cruz Mountains, part of California’s Coast Ranges. All of California’s State Waters in the map area is part of the Monterey Bay National Marine Sanctuary.The map area is cut by an offshore section of the San Gregorio Fault Zone, and it lies about 20 kilometers southwest of the San Andreas Fault Zone. Regional folding and uplift along the coast has been attributed to a westward bend in the San Andreas Fault Zone and to right-lateral movement along the San Gregorio Fault Zone. Most of the coastal zone is characterized by low, rocky cliffs and sparse, small pocket beaches backed by low, terraced hills. Point Santa Cruz, which forms the north edge of Monterey Bay, provides protection for the beaches in the easternmost part of the map area by sheltering them from the predominantly northwesterly waves.The shelf in the map area is underlain by variable amounts (0 to 25 m) of
-
California State Waters Map Series: offshore of Santa Barbara, California
Johnson, Samuel Y.; Dartnell, Peter; Cochrane, Guy R.; Golden, Nadine E.; Phillips, Eleyne L.; Ritchie, Andrew C.; Greene, H. Gary; Krigsman, Lisa M.; Kvitek, Rikk G.; Dieter, Bryan E.; Endris, Charles A.; Seitz, Gordon G.; Sliter, Ray W.; Erdey, Mercedes D.; Gutierrez, Carlos I.; Wong, Florence L.; Yoklavich, Mary M.; Draut, Amy E.; Hart, Patrick E.; Conrad, James E.; Cochran, Susan A.; Johnson, Samuel Y.; Cochran, Susan A.
2013-01-01
utilized Santa Barbara coastal zone, including Arroyo Burro Beach Park, Leadbetter Beach, East Beach, and “Butterfly Beach.” There are ongoing coastal erosion problems associated with both development and natural processes; between 1933–1934 and 1998, cliff erosion in the map area occurred at rates of about 0.1 to 1 m/yr, the largest amount (63 m) occurring at Arroyo Burro in the western part of the map area. In addition, development of the Santa Barbara Harbor, which began in 1928, lead to shoaling west of the harbor as the initial breakwater trapped sand, as well as to coastal erosion east of the harbor. Since 1959, annual harbor dredging has mitigated at least some of the downcoast erosion problems. The Offshore of Santa Barbara map area lies in the central part of the Santa Barbara littoral cell, which is characterized by littoral drift to the east-southeast. Drift rates have been estimated to be about 400,000 tons/yr at Santa Barbara Harbor. Sediment supply to the western and central parts of the littoral cell, including the map area, is largely from relatively small transverse coastal watersheds. Within the map area, these coastal watersheds include (from east to west) San Ysidro Creek, Oak Creek, Montecito Creek, Sycamore Creek, Mission Creek, Arroyo Burro, and Atascadero Creek. The Ventura and Santa Clara Rivers, the mouths of which are about 40 to 50 km southeast of Santa Barbara, are much larger sediment sources. Still farther east, eastward-moving sediment in the littoral cell is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips gently seaward (about 0.4° to 0.8°) so that water depths at the 3-nautical-mile limit of California’s State Waters are about 45 m in the east and about 75 m in the west. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north
-
Holzer, Thomas L.; Noce, Thomas E.; Bennett, Michael J.
2008-01-01
Maps showing the probability of surface manifestations of liquefaction in the northern Santa Clara Valley were prepared with liquefaction probability curves. The area includes the communities of San Jose, Campbell, Cupertino, Los Altos, Los Gatos Milpitas, Mountain View, Palo Alto, Santa Clara, Saratoga, and Sunnyvale. The probability curves were based on complementary cumulative frequency distributions of the liquefaction potential index (LPI) for surficial geologic units in the study area. LPI values were computed with extensive cone penetration test soundings. Maps were developed for three earthquake scenarios, an M7.8 on the San Andreas Fault comparable to the 1906 event, an M6.7 on the Hayward Fault comparable to the 1868 event, and an M6.9 on the Calaveras Fault. Ground motions were estimated with the Boore and Atkinson (2008) attenuation relation. Liquefaction is predicted for all three events in young Holocene levee deposits along the major creeks. Liquefaction probabilities are highest for the M7.8 earthquake, ranging from 0.33 to 0.37 if a 1.5-m deep water table is assumed, and 0.10 to 0.14 if a 5-m deep water table is assumed. Liquefaction probabilities of the other surficial geologic units are less than 0.05. Probabilities for the scenario earthquakes are generally consistent with observations during historical earthquakes.
-
Socioeconomic status and trends in alcohol drinking in the Danish MONICA population, 1982-92
DEFF Research Database (Denmark)
Osler, M; Jørgensen, Torben; Grønbaek, M
2001-01-01
AIMS: To examine trends in alcohol drinking in different educational groups. METHODS: Data from three cross-sectional WHO MONICA surveys conducted in 1982-84, 1987, and 1991-92 were analysed to estimate trends in abstention, moderate, heavy, and sporadic heavy alcohol use in relation to level of ...
-
2013-10-03
... 82,962 Horror Entertainment, LLC, d/b/a Santa Monica, CA.... FEARnet, Eleventh Hour. [[Page 61392... Ready. 82,864 Homestead Technologies, Centennial, CO...... Intuit, Inc., Endurance International Group...
-
Olmos, R.; Barahona, F.; Cartagena, R.; Soriano, T.; Salazar, J.; Hernandez, P.; Perez, N.; Notsu, K.; Lopez, D.
2001-12-01
Santa Ana volcanic complex (0.22 Ma), located 40 Km west of San Salvador, comprises Santa Ana, Izalco, and Cerro Verde stratovolcanoes, the Coatepeque collapse caldera, as well as several cinder cones and explosion craters. Most recent activity has occurred at Izalco (1966) and Santa Ana which shows a permanent acidic crater lake with an intense fumarolic activity. In addition, Santa Ana exhibits a SO2-rich rising plume though no local seismicity has been reported. Weak fumarolic activity is also present at two locations within the Santa Ana volcanic complex: the summit crater of Izalco and Cerro Pacho at Coatepeque caldera. Other important structural features of this volcanic complex are two fault/fissure systems running NNW-SSE that can be identified by the alignment of the stratovolcanoes and numerous cinder cones and explosion craters. In January 2001, a 7.6 magnitude earthquake occurred about 150 Km SE of Santa Ana volcano. A soil gas and CO2 efflux survey was performed to evaluate the impact of this seismic event upon the diffuse degassing rates in Santa Ana volcanic complex in March 2001. A total of 450 soil gas and diffuse CO2 efflux measurements were carried out covering an area of 209.5 Km2. CO2 efflux ranged from non-detectable values to 293 gm-2d-1, with a median of 8.9 gm-2d-1 and an upper quartile of 5.2 gm-2d-1. The CO2 efflux spatial distribution reveals the existence of areas with CO2 efflux higher than 60 gm-2d-1 associated to the fault/fissure systems of NNW-SSE orientation. One of these areas, Cerro Pacho, was selected for the continuous monitoring of diffuse CO2 efflux in late May 2001. Secular variations of diffuse CO2 efflux ranged from 27.4 to 329 gm-2d-1 with a median of 130 gm-2d-1 and a quartile range of 59.3 gm-2d-1. An increasing trend of 43 gm-2d-1 was observed between May and August 2001 overlapped to high-frequency minor fluctuations related to meteorological variables' changes. However, a larger observation time-span is needed to
-
Alexander, C.R.; Lee, H.J.
2009-01-01
Sediment discharged into the portion of the Southern California Bight extending from Santa Barbara to Dana Point enters a complex system of semi-isolated coastal cells, narrow continental shelves, submarine canyons, and offshore basins. On both the Santa Monica and San Pedro margins, 210Pb accumulation rates decrease in an offshore direction (from ??0.5 g cm-2yr-1 to 0.02 g cm-2yr -1), in concert with a fining in sediment grain size (from 4.5?? to 8.5??), suggesting that offshore transport of wave-resuspended material occurs as relatively dilute nepheloid layers and that hemiplegic sedimentation dominates the supply of sediment to the outer shelf, slope, and basins. Together, these areas are effectively sequestering up to 100% of the annual fluvial input. In contrast to the Santa Monica margin, which does not display evidence of mass wasting as an important process of sediment delivery and redistribution, the San Pedro margin does provide numerous examples of failures and mass wasting, suggesting that intraslope sediment redistribution may play a more important role there. Basin deposits in both areas exhibit evidence of turbidites tentatively associated with both major floods and earthquakes, sourced from either the Redondo Canyon (San Pedro Basin) or Dume Canyon (Santa Monica Basin). On the Palos Verdes shelf, sediment-accumulation rates decrease along and across the shelf away from the White's Point outfall, which has been a major source of contaminants to the shelf deposits. Accumulation rates prior to the construction of the outfall were ??0.2 g cm-2yr-1 and increased 1.5-3.7 times during peak discharges from the outfall in 1971. The distal rate of accumulation has decreased by ??50%, from 0.63 g cm -2yr-1 during the period 1971-1992 to 0.29 g cm -2yr-1 during the period 1992-2003. The proximal rate of accumulation, however, has only decreased ??10%, from 0.83 g cm -2yr-1 during the period 1971-1992 to 0.73 g cm -2yr-1 during the period 1992-2003. Effluent
-
Aedla, Margit, 1970-
2008-01-01
Itaalia firma ZERODISEGNO sari Nobody is perfect (plastikvoodi, Guard peegliga, Stacktable, disain: Gaetano Pesce), plastikust tugitool Santa Monica (disain: Denis Santachiara), Casamania polüpropüleenist tool Sue (disain: Cantarutti & Petricich)
-
California Basin Studies (CaBS)
International Nuclear Information System (INIS)
Gorsline, D.S.
1991-01-01
The California Continental Borderland's present configuration dates from about 4 to 5 X 10 6 years Before Present (B.P.) and is the most recent of several configurations of the southern California margin that have evolved after the North America Plate over-rode the East Pacific Rise about 30 X 10 6 years ago. The present morphology is a series of two to three northwest-southeast trending rows of depressions separated by banks and insular ridges. Two inner basins, Santa Monica and San Pedro, have been the site for the Department of Energy-funded California Basin Study (CaBS) Santa Monica and San Pedro Basins contain post-Miocene sediment thicknesses of about 2.5 and 1.5 km respectively. During the Holocene (past 10,000 years) about 10-12 m have accumulated. The sediment entered the basin by one or a combination of processes including particle infall (mainly as bioaggregates) from surface waters, from nepheloid plumes (surface, mid-depths and near-bottom), from turbidity currents, mass movements, and to a very minor degree direct precipitation. In Santa Monica Basin, during the last century, particle infall and nepheloid plume transport have been the most common processes. The former dominates in the central basin floor in water depths from 900 to 945 m. where a characteristic silt-clay with a typical mean diameter of about 0.006 mm, phi standard deviation
-
Montes, Camilo; Guzman, Georgina; Bayona, German; Cardona, Agustin; Valencia, Victor; Jaramillo, Carlos
2010-10-01
A moderate amount of vertical-axis clockwise rotation of the Santa Marta massif (30°) explains as much as 115 km of extension (stretching of 1.75) along its trailing edge (Plato-San Jorge basin) and up to 56 km of simultaneous shortening with an angular shear of 0.57 along its leading edge (Perijá range). Extensional deformation is recorded in the 260 km-wide, fan-shaped Plato-San Jorge basin by a 2-8 km thick, shallowing-upward and almost entirely fine-grained, upper Eocene and younger sedimentary sequence. The simultaneous initiation of shortening in the Cesar-Ranchería basin is documented by Mesozoic strata placed on to lower Eocene syntectonic strata (Tabaco Formation and equivalents) along the northwest-verging, shallow dipping (9-12° to the southeast) and discrete Cerrejón thrust. First-order subsidence analysis in the Plato-San Jorge basin is consistent with crustal stretching values between 1.5 and 2, also predicted by the rigid-body rotation of the Santa Marta massif. The model predicts about 100 km of right-lateral displacement along the Oca fault and 45 km of left-lateral displacement along the Santa Marta-Bucaramanga fault. Clockwise rotation of a rigid Santa Marta massif, and simultaneous Paleogene opening of the Plato-San Jorge basin and emplacement of the Cerrejón thrust sheet would have resulted in the fragmentation of the Cordillera Central-Santa Marta massif province. New U/Pb ages (241 ± 3 Ma) on granitoid rocks from industry boreholes in the Plato-San Jorge basin confirm the presence of fragments of a now segmented, Late Permian to Early Triassic age, two-mica, granitic province that once spanned the Santa Marta massif to the northernmost Cordillera Central.
-
Stanley, Richard G.; Barron, John A.; Powell, Charles L.
2017-12-22
We used geological field studies and diatom biostratigraphy to test a published hypothesis that Neogene marine siliceous strata in the Maricopa and Parkfield areas, located on opposite sides of the San Andreas Fault, were formerly contiguous and then were displaced by about 80–130 kilometers (km) of right-lateral slip along the fault. In the Maricopa area on the northeast side of the San Andreas Fault, the upper Miocene Bitterwater Creek Shale consists of hard, siliceous shale with dolomitic concretions and turbidite sandstone interbeds. Diatom assemblages indicate that the Bitterwater Creek Shale was deposited about 8.0–6.7 million years before present (Ma) at the same time as the uppermost part of the Monterey Formation in parts of coastal California. In the Parkfield area on the southwest side of the San Andreas Fault, the upper Miocene Pancho Rico Formation consists of soft to indurated mudstone and siltstone and fossiliferous, bioturbated sandstone. Diatom assemblages from the Pancho Rico indicate deposition about 6.7–5.7 Ma (latest Miocene), younger than the Bitterwater Creek Shale and at about the same time as parts of the Sisquoc Formation and Purisima Formation in coastal California. Our results show that the Bitterwater Creek Shale and Pancho Rico Formation are lithologically unlike and of different ages and therefore do not constitute a cross-fault tie that can be used to estimate rightlateral displacement along the San Andreas Fault.In the Maricopa area northeast of the San Andreas Fault, the Bitterwater Creek Shale overlies conglomeratic fan-delta deposits of the upper Miocene Santa Margarita Formation, which in turn overlie siliceous shale of the Miocene Monterey Formation from which we obtained a diatom assemblage dated at about 10.0–9.3 Ma. Previous investigations noted that the Santa Margarita Formation in the Maricopa area contains granitic and metamorphic clasts derived from sources in the northern Gabilan Range, on the opposite side of
-
Magnetic paleointensities in fault pseudotachylytes and implications for earthquake lightnings
Leibovitz, Natalie Ruth
Fault pseudotachylytes commonly form by frictional melting due to seismic slip. These fine-grained clastic rocks result from melt quenching and may show a high concentration of fine ferromagnetic grains. These grains are potentially excellent recorders of the rock natural remanent magnetization (NRM). The magnetization processes of fault pseudotachylytes are complex and may include the following: i) near coseismic thermal remanent magnetization (TRM) acquired upon cooling of the melt; ii) coseismic lightning induced remanent magnetization (LIRM) caused by earthquake lightnings (EQL); iii) post seismic chemical remanent magnetization (CRM) related to both devitrification and alteration. Deciphering these magnetization components is crucial to the interpretation of paleointensities to see if coseismic phenomena such as EQL's were recorded within these rocks. Hence the paleomagnetic record of fault pseudotachylytes provides an independent set of new constraints on coseismic events. Fault pseudotachylytes from the Santa Rosa Mountains, California host a magnetic assemblage dominated by stoichiometric magnetite, formed from the breakdown of ferromagnesian silicates and melt oxidation at high temperature. Magnetite grain size in these pseudotachylytes compares to that of magnetite formed in friction experiments. Paleomagnetic data on these 59 Ma-old fault rocks reveal not only anomalous magnetization directions, inconsistent with the coseismic geomagnetic field, but also anomalously high magnetization intensities. Here we discuss results of rock magnetism and paleointensity experiments designed to quantify the intensity of coseismic magnetizing fields. The REM' paleointensity method, previously tested on meteorites, is particularly well suited to investigate NRMs resulting from non-conventional and multiple magnetization processes. Overall findings indicate an isothermal remanent magnetization (IRM) in some, but not all, specimens taken from four different Santa Rosa
-
DEFF Research Database (Denmark)
Gerdes, L U; Brønnum-Hansen, H; Madsen, Mette
2000-01-01
Data from 6695 men and women of ages 30, 40, 50, and 60 years, examined in the Danish WHO MONICA surveys in 1982-84, in 1986-87, and in 1991-92, were analyzed to estimate secular trends in body height and weight, blood pressure, and serum total, HDL-, and LDL-cholesterol, and triglyceride. Body...... height increased 0.1% per year, and body mass index increased 0.4% per year in women. Diastolic blood pressure increased 0.4% per year in women and 0.6% per year in 60-year-old men. HDL cholesterol declined 0.4% per year. Body mass indices in men, diastolic blood pressures in men age......, systolic blood pressures, total- and LDL cholesterol and triglyceride did not change. The levels of biological risk factors in the Danish WHO MONICA study population did not show trends during the 1980s that help explain the declining incidence of myocardial infarction in the population....
-
China, the United States, and the Global Economy
National Research Council Canada - National Science Library
Chen, Shuxun
2001-01-01
This book contains the edited papers presented by Chinese and American scholars and practitioners at the second of four annual conferences organized by RAND in Santa Monica, and the China Reform Forum (CRF) in Beijing...
-
Wong, I.; Olig, S.; Dober, M.; Silva, W.; Wright, D.; Thomas, P.; Gregor, N.; Sanford, A.; Lin, K.-W.; Love, D.
2004-01-01
New Mexico's population is concentrated along the corridor that extends from Belen in the south to Española in the north and includes Albuquerque and Santa Fe. The Rio Grande rift, which encompasses the corridor, is a major tectonically, volcanically, and seismically active continental rift in the western U.S. Although only one large earthquake (moment magnitude (M) ≥ 6) has possibly occurred in the New Mexico portion of the rift since 1849, paleoseismic data indicate that prehistoric surface-faulting earthquakes of M 6.5 and greater have occurred on aver- age every 400 yrs on many faults throughout the Rio Grande rift.
-
Digital Repository Service at National Institute of Oceanography (India)
Bhaskar, P.V.; Cardozo, E.; Giriyan, A.; Garg, A.; Bhosle, N.B.
particle flux study in the Santa Monica San Pedro Basin off Los Angeles: particle flux, primary production and transmissometer study. Continental Shelf Research 7: 307-328. Olesen, M. and Lundsgaard, C. 1996 Seasonal sedimentation of autochthonous...
-
Hillhouse, John W.
2010-01-01
New paleomagnetic results from mid-Tertiary sedimentary beds in the Santa Monica Mountains reinforce the evidence for large-scale rotation of the western Transverse Ranges, and anisotropy measurements indicate that compaction-induced inclination flattening may resolve a long-standing controversy regarding the original paleolatitude of the rotated block. Previously published paleomagnetic data indicate that post-Oligocene rotation amounts to 70°–110° clockwise, affecting the Channel Islands, Santa Monica Mountains, and Santa Ynez Mountains. The Sespe Formation near Malibu consists of a lower member dominated by nonmarine sandstone and conglomerate and an upper section, the Piuma Member, which consists of gray-red sandstone and mudstone interbedded with minor tuff and limestone beds. The Piuma Member has a paleomagnetic pole at 36.6°N, 326.7°E (A95min = 5.0°, A95max = 9.6°), obtained by thermal demagnetization of 34 oriented cores from Oligocene and early Miocene beds. After correcting for plunge of the geologic structure, the data are consistent with significant clockwise rotation (77° ± 7°) of the region relative to stable North America. Rotation of the western Transverse Ranges is generally viewed as a consequence of Pacific–North American plate interactions after 28 Ma, when east–west subduction gave way to northwest transform motion in southern California. Inclinations from the Piuma study indicate a paleolatitude anomaly of 11° ± 7° and are consistent with a mean northward drift that exceeds generally accepted San Andreas fault displacement by a factor of 3. However, sedimentary inclination error may accentuate the anomaly. Anisotropy of isothermal remanent magnetization indicates inclination flattening of approximately 8°, and correction for the effect reduces the paleolatitude anomaly to 5.3° ± 5.8°. Compaction may explain the inclination flattening in these sedimentary rocks, but the process does not adequately explain lower
-
Full Text Available ... Medical Center, Fort Lauderdale, FL, 5/12/2014) Total Ankle Replacement (Doctors Hospital, Coral Gables, FL, 11/ ... City, UT, 11/20/2012) Anterior Approach to Total Hip Replacement (St. John's Health Center, Santa Monica, ...
-
Physical data of soil profiles formed on late Quaternary marine terraces near Santa Cruz, California
Munster, Jennie; Harden, Jennifer W.
2002-01-01
The marine terraces in and around Santa Cruz, California, represent a set of well-preserved terraces formed as a product of geology, sea level, and climate. A marine terrace begins as a wave cut platform. Eustatic sea level changes, seacliff erosion, and tectonic uplift work together to generate marine terraces. "When a wave-cut platform is raised (due to tectonic activity) above sea level and cliffed by wave action it becomes a marine terrace" (Bradley, 1957, p. 424). During glacial periods, eustatic sea level is estimated to have dropped by 150 meters (Fairbanks, 1989). Cliff retreat measured from aerial photographs between 1930 and 1980 vary from 0.0 to 0.2 m yr–1 (Best and Griggs, 1991). Estimates of uplift rates along the Santa Cruz coastline vary from 0.10 to 0.48 m kyr–1 (Bradley and Griggs, 1976; Weber and others, 1999). Uplift mechanisms include coseismic uplift associated both with a reverse component of slip on the steeply SW dipping Loma Prieta fault in the restraining bend of the San Andreas Fault and a small component of reverse slip on the steeply SE dipping San Gregorio fault (Anderson and Menking 1994). Previous work studying physical properties on these terraces include Pinney and others (in press) and Aniku (1986) and Bowman and Estrada (1980). Sedimentary deposits of the marine terraces are a mixture of terrestrial and marine sediments but generally consist of a sheet of marine deposits overlying the old platform and a wedge of nonmarine deposits banked against the old sea cliff (Bradley, 1957). Bedrock underlying the terraces in the Santa Cruz area is generally either Santa Margarita Sandstone or Santa Cruz Mudstone. The Santa Margarita Sandstone represents an upper Miocene, transgressive, tidally dominated marine-shelf deposit with crossbedded sets of sand and gravel and horizontally stratified and bioturbated invertebrate-fossils beds (Phillips, 1990). The siliceous Santa Cruz Mudstone, of late Miocene age, conformably overlies the Santa
-
The use of microtomography in structural geology: A new methodology to analyse fault faces
Jacques, Patricia D.; Nummer, Alexis Rosa; Heck, Richard J.; Machado, Rômulo
2014-09-01
This paper describes a new methodology to kinematically analyze faults in microscale dimensions (voxel size = 40 μm), using images obtained by X-ray computed microtomography (μCT). The equipment used is a GE MS8x-130 scanner. It was developed using rocks samples from Santa Catarina State, Brazil, and constructing micro Digital Elevation Models (μDEMs) for the fault surface, for analysing microscale brittle structures including striations, roughness and steps. Shaded relief images were created for the μDEMs, which enabled the generation of profiles to classify the secondary structures associated with the main fault surface. In the case of a sample with mineral growth that covers the fault surface, it is possible to detect the kinematic geometry even with the mineral cover. This technique proved to be useful for determining the sense of movement of faults, especially when it is not possible to determine striations in macro or microscopic analysis. When the sample has mineral deposit on the surface (mineral cover) this technique allows a relative chronology and geometric characterization between the faults with and without covering.
-
The occupational health of Santa Claus
Straube, Sebastian; Fan, Xiangning
2015-01-01
Previous publications in the field of Santa studies have not focused on health and safety issues arising from Santa?s workplace activities. However, it should be acknowledged that unique occupational hazards exist for Santa Claus. Major occupational health issues affecting Santa are discussed, along with suggestions for future research directions.
-
Automática de la línea La Moza – Santa Clara; Automatic of the line la Moza – Santa Clara
Directory of Open Access Journals (Sweden)
Marta Elena Bravo de las Casas
2015-09-01
Full Text Available La línea de 110 kV Santa Clara – La Moza, ubicada en medio de la línea de enlace entre la hidroeléctrica Robustiano León (Hanabanilla y la subestación Santa Clara 110 kV, es de gran importancia teniendo en cuenta que de la misma se obtiene la derivación de donde se alimenta la Subestación de 110/13,8 kV Gran Panel de nuevo tipo. La misma cuenta con un mecanismo de reenganche trifásico el cual no realiza de forma exitosa sus funciones, lo que trae afectaciones y dificultades a la hora de restablecer el sistema. En este trabajo se analizan las condiciones de operación de la región, así como la problemática de las automáticas instaladas proponiendo soluciones con el objetivo de lograr una operación eficaz ante las averías, sin que la hidroeléctrica Hanabanilla se pierda del Sistema Eléctrico Nacional y que no se pierda el suministro de energía eléctrica a la subestación Gran Panel.The 110 kV line Santa Clara –La Moza, which is located in the middle of the line of link between the hydroelectric Robustiano León (Hanabanilla and the substation Santa Clara 110 kV, is of great importance considering that of the same one obtains the derivation where new type Gran Panel Substation 110/13,8 feeds.Ithas athree-phasereclosingmechanismwhichdoes not performhis dutiessuccessfully, which brings affectationsanddifficultythe moment of restoringthe system. In this work, the operating conditions of the region are discussed, as well as the problem of the automatics installed, and is proposing solutions in order to ensure effective operation before faults, without that the Hanabanilla hydroelectric loses the syncrhronism with the Electrical National System and supply the substation Gran Panelis not lost.
-
Update of the German Diabetes Risk Score and external validation in the German MONICA/KORA study.
Mühlenbruch, Kristin; Ludwig, Tonia; Jeppesen, Charlotte; Joost, Hans-Georg; Rathmann, Wolfgang; Meisinger, Christine; Peters, Annette; Boeing, Heiner; Thorand, Barbara; Schulze, Matthias B
2014-06-01
Several published diabetes prediction models include information about family history of diabetes. The aim of this study was to extend the previously developed German Diabetes Risk Score (GDRS) with family history of diabetes and to validate the updated GDRS in the Multinational MONItoring of trends and determinants in CArdiovascular Diseases (MONICA)/German Cooperative Health Research in the Region of Augsburg (KORA) study. We used data from the European Prospective Investigation into Cancer and Nutrition (EPIC)-Potsdam study for extending the GDRS, including 21,846 participants. Within 5 years of follow-up 492 participants developed diabetes. The definition of family history included information about the father, the mother and/or sibling/s. Model extension was evaluated by discrimination and reclassification. We updated the calculation of the score and absolute risks. External validation was performed in the MONICA/KORA study comprising 11,940 participants with 315 incident cases after 5 years of follow-up. The basic ROC-AUC of 0.856 (95%-CI: 0.842-0.870) was improved by 0.007 (0.003-0.011) when parent and sibling history was included in the GDRS. The net reclassification improvement was 0.110 (0.072-0.149), respectively. For the updated score we demonstrated good calibration across all tenths of risk. In MONICA/KORA, the ROC-AUC was 0.837 (0.819-0.855); regarding calibration we saw slight overestimation of absolute risks. Inclusion of the number of diabetes-affected parents and sibling history improved the prediction of type 2 diabetes. Therefore, we updated the GDRS algorithm accordingly. Validation in another German cohort study showed good discrimination and acceptable calibration for the vast majority of individuals. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
-
Aftershocks and triggered events of the Great 1906 California earthquake
Meltzner, A.J.; Wald, D.J.
2003-01-01
The San Andreas fault is the longest fault in California and one of the longest strike-slip faults in the world, yet little is known about the aftershocks following the most recent great event on the San Andreas, the Mw 7.8 San Francisco earthquake on 18 April 1906. We conducted a study to locate and to estimate magnitudes for the largest aftershocks and triggered events of this earthquake. We examined existing catalogs and historical documents for the period April 1906 to December 1907, compiling data on the first 20 months of the aftershock sequence. We grouped felt reports temporally and assigned modified Mercalli intensities for the larger events based on the descriptions judged to be the most reliable. For onshore and near-shore events, a grid-search algorithm (derived from empirical analysis of modern earthquakes) was used to find the epicentral location and magnitude most consistent with the assigned intensities. For one event identified as far offshore, the event's intensity distribution was compared with those of modern events, in order to contrain the event's location and magnitude. The largest aftershock within the study period, an M ???6.7 event, occurred ???100 km west of Eureka on 23 April 1906. Although not within our study period, another M ???6.7 aftershock occurred near Cape Mendocino on 28 October 1909. Other significant aftershocks included an M ???5.6 event near San Juan Bautista on 17 May 1906 and an M ???6.3 event near Shelter Cove on 11 August 1907. An M ???4.9 aftershock occurred on the creeping segment of the San Andreas fault (southeast of the mainshock rupture) on 6 July 1906. The 1906 San Francisco earthquake also triggered events in southern California (including separate events in or near the Imperial Valley, the Pomona Valley, and Santa Monica Bay), in western Nevada, in southern central Oregon, and in western Arizona, all within 2 days of the mainshock. Of these trigerred events, the largest were an M ???6.1 earthquake near Brawley
-
Modeling Synergies in Large Human-Machine Networked Systems
2013-09-25
Agents and Multi- Agent Systems (AAMAS), Valencia, Spain, June 4-8, 2012. Steven Okamoto_, Praveen Paruchuri, Yonghong Wang, Katia Sycara, Janusz...Society, Santa Monica, CA: Human Factors and Ergonomics Society. 86. Steven Okamoto_, Praveen Paruchuri, Yonghong Wang, Katia Sycara, Janusz
-
Banes, A.; Alvarez Ortega, K. G.; Henry, M.; Niemi, T.
2017-12-01
During the 2017 Baja Basins Research Experience for Undergraduates (REU), a DJI Phantom 3 Advanced Quadcopter drone equipped with a GPS-enabled, 12 Megapixel camera was manually flown to collect aerial photographs of several geologic outcrops on the Minera Boléo and Lucifer mines in central Baja California Sur. The strip mine faces, roadcuts, and arroyos exposed Neogene to Quaternary sediments of the Santa Rosalía basin including the basal Cu-Zn-Mn-Co-bearing Miocene Boléo Formation that is actively being mined. It is overlain by Plio-Quaternary marine and non-marine deposits. Photographs were collected with a 70% overlap and processed into geographically-referenced, orthophotomosaics using Agisoft Photoscan. The output models have an adequate resolution for viewing bedding and fault characteristics. Measurements can be made inside the 3D models, making drones a useful tool for studying the geometry of stratigraphic, structural, and geomorphologic features. The studied sites included: 1) roadcuts on Mesa Soledad that exposed oblique-slip faults and syntectonically deposited non-marine and marine conglomerates and sandy, fossil-rich Pliocene beach sediment; 2) outcrops of the Boléo Fm in the Texcoco mine area that showed the detailed stratigraphic relationship between ore seams (mantos) and faults; 3) outcrops where sandstone samples were collected for detrital zircon geochronology; 4) strip mine 3120 that exposed faults and folds in the Boléo Formation; and 5) faults in Miocene volcanic rocks in the Arroyo Infierno near the Lucifer mine. This study shows that photogrammetry and modeling of geologic structures exposed in mine and road outcrops can provide useful information for reconstructing basin architecture and clarifying structural evolution of the Santa Rosalia Basin.
-
Best of Adobe Photoshop techniques and images from professional photographers
Hurter, Bill
2006-01-01
Bill Hurter is the editor of ""Rangefinder"" magazine, the former editor of ""Petersen's PhotoGraphic,"" and the author of ""The Best of Wedding Photography, Group Portrait Photography Handbook, The Portrait Photographer's Guide to Posing, ""and ""Portrait Photographer's Handbook. ""He lives in Santa Monica, California.
-
2013-09-19
... creation and reestablishment of historic riparian strand and freshwater marsh habitat to support increased populations of wildlife and enhance habitat connectivity within the study area, as well as to provide opportunities for connectivity to ecological zones such as the Santa Monica Mountains, Verdugo Hills, Elysian...
-
2013-02-15
... 11, 2011. 82,239 Hewlett Packard Santa Monica, CA....... December 10, 2011. Enterprise Services, LLC, Technical/ Enterprise Services Division, SAIT Services. 82,250 YP Western Directory Anaheim, CA December 12, 2011. LLC, Anaheim California Div., Publishing Operation, YP Western Holding YP Advertising. 82,257...
-
From the Andes to the Hindu Kush: Columbian Airpower Lessons for Afghanistan
2010-05-20
School of Advanced Air and Space Studies Thesis, Maxwell AFB: Air University, 1997. 61 Kline, Harvey F. State Building and Conflict Resolution in...Strategic Importance of USAF Advisory and Assistance Missions. Project Air Force, Santa Monica: RAND Corporation, 2006. Weinstein , Jessica. "U.S
-
Containing Revolutionary Islam: Reassessing the Problem and the Approach
2017-03-01
1997), 152-155. Giap studied not only Mao, but Clausewitz, Napoleon, Sun Tzu , and T.E. Lawrence. While he amalgamated many of the ideas and concepts...Thoughts ........................................................................................................................... 52 Bibliography ...54 Bibliography Aaron, David. In Their Own Words: Voices of Jihad--compilation and Commentary. Santa Monica
-
2013-08-12
... economic prong of the domestic industry requirement. On review, the Commission has determined to reverse... industry requirement. Accordingly, the investigation is terminated with a finding of no violation of... LLC of Santa Monica, California; and Camus Wine & Spirits Group of Cognac, France (``Camus''). Camus...
-
Jachens, Robert C.; Wentworth, Carl M.; Graymer, Russell W.; Williams, Robert; Ponce, David A.; Mankinen, Edward A.; Stephenson, William J.; Langenheim, Victoria
2017-01-01
The Evergreen basin is a 40-km-long, 8-km-wide Cenozoic sedimentary basin that lies mostly concealed beneath the northeastern margin of the Santa Clara Valley near the south end of San Francisco Bay (California, USA). The basin is bounded on the northeast by the strike-slip Hayward fault and an approximately parallel subsurface fault that is structurally overlain by a set of west-verging reverse-oblique faults which form the present-day southeastward extension of the Hayward fault. It is bounded on the southwest by the Silver Creek fault, a largely dormant or abandoned fault that splays from the active southern Calaveras fault. We propose that the Evergreen basin formed as a strike-slip pull-apart basin in the right step from the Silver Creek fault to the Hayward fault during a time when the Silver Creek fault served as a segment of the main route by which slip was transferred from the central California San Andreas fault to the Hayward and other East Bay faults. The dimensions and shape of the Evergreen basin, together with palinspastic reconstructions of geologic and geophysical features surrounding it, suggest that during its lifetime, the Silver Creek fault transferred a significant portion of the ∼100 km of total offset accommodated by the Hayward fault, and of the 175 km of total San Andreas system offset thought to have been accommodated by the entire East Bay fault system. As shown previously, at ca. 1.5–2.5 Ma the Hayward-Calaveras connection changed from a right-step, releasing regime to a left-step, restraining regime, with the consequent effective abandonment of the Silver Creek fault. This reorganization was, perhaps, preceded by development of the previously proposed basin-bisecting Mount Misery fault, a fault that directly linked the southern end of the Hayward fault with the southern Calaveras fault during extinction of pull-apart activity. Historic seismicity indicates that slip below a depth of 5 km is mostly transferred from the Calaveras
-
2016-02-16
Castro, Renato Cruz De, “The US-Philippine Alliance: An Evolving Hedge Against An Emerging China Challenge,” Contemporary Southeast Asia, Vol 31...Rise, RAND, Santa Monica, CA: RAND, 2008 Mogato, Manuel , “The US-Philippine Military Agreement That Was Supposed To Counter China Is Facing Another
-
Hybrid Warfare: Preparing for Future Conflict
2015-02-17
ciceromagazine.com/?s=getting+behind+hybrid+warfare. Brown , Col Leslie F. “Twenty-First Century Warfare Will be Hybrid.” Carlisle Barracks, PA...Lebanon and Gaza.” Rand Corporation Occasional Paper. Santa Monica, CA: Rand Corporation, 2010. Jones, Gareth and Darya Korsunskaya. “U.S., EU
-
Sustaining the US Air Force’s Force Support Career Field through Officer Workforce Planning
2012-07-01
create value for a firm by successfully implementing that given firm’s strategy. If an 31 US Army TRADOC Pam 525-8-2, p. 5. 32 Daft ...Maintaining the Balance Between Manpower, Skill Levels, and PERSTEMPO. Santa Monica, CA: RAND Corporation, 2006. Daft , R.L., Organization Theory
-
Determining the Optimal C-130 Deployed Crew Ratio
2014-06-13
components. The active component operates at a 1:2 (with a goal of 1:3) deploy-to- dwell while the ARC plans a 1:5 ( Stenner , 2011, pp. 5, 10). This...Rand Corporation, 2011. Rand Corporation. Intratheater Airlift Functional Solution Analysis. Santa Monica: Rand Corporation, 2011. Stenner
-
2012-09-21
... Electronics, LLC, 2220 Colorado Ave., Santa Monica, CA 90404 Monster Cable Products, Inc., 455 Valley Dr... Electronics, Inc., 14881 Evergreen Ave., Clearwater, FL 33762 TELEX Communications, Inc., 12000 Portland Ave... Technology, Inc., 5835 Shugart Lane, Traverse City, MI 49684 Nexteer Automotive Corp., 3900 East Holland Rd...
-
Virtual Collaboration for a Distributed Enterprise
2013-01-01
aircraft SIGINT signals intelligence UAV unmanned aerial vehicle VoIP voice over Internet protocol 1 1. The Need for Effective Virtual...Z., and Robert H. Anderson, Toward an Ethics and Etiquette for Electronic Mail, Santa Monica, Calif.: RAND Corporation, R-3283-NSF/RC, 1985. As of
-
Making Strategic Analysis Matter
2012-01-01
Bryan Gabbard , Assessing the Tradecraft of Intelligence Analysis, Santa Monica, Calif.: RAND Corporation, TR-293, 2008. 4 See The Commission on the...July 7, 2011: http://www.rand.org/pubs/occasional_papers/OP152.html Treverton, Gregory F., and C. Bryan Gabbard , Assessing the Tradecraft of
-
Evaluation of Wearable Simulation Interface for Military Training
2012-01-01
Lampton, 2005). This assumption was based on support from the identi- cal elements theory (Holding, 1965; Thorndike & Woodworth, 1901), which states that...Annual Meeting of the Human Fac- tors and Ergonomics Society (pp. 2014–2018). Santa Monica, CA: Human Factors and Ergonomics Society. Thorndike , E. L
-
Trends in lifestyle coronary risk factors in the Danish MONICA population 1982-1992
DEFF Research Database (Denmark)
Gerdes, Lars Ulrik; Brønnum-Hansen, H; Osler, M
2002-01-01
Myocardial infarction incidence rate declined 3-5% per year during 1982-1992 in the Danish study population of the WHO MONICA Project. We examined whether smoking habits, alcohol intake, dietary habits and physical activity levels changed in the population during the same period. Data from 6695 men...... in 30-, 40- and 50-y-old women, but increased 0.9% per year in 60-y-old women. The percentages of heavy cigarette smoking men and women nevertheless remained constant and close to 30%. Total alcohol intake declined among 30-y-olds, but appeared constant in other age groups. However, among 60-y-old men...
-
Three-dimensional geologic model of the southeastern Espanola Basin, Santa Fe County, New Mexico
Pantea, Michael P.; Hudson, Mark R.; Grauch, V.J.S.; Minor, Scott A.
2011-01-01
This multimedia model and report show and describe digital three-dimensional faulted surfaces and volumes of lithologic units that confine and constrain the basin-fill aquifers within the Espanola Basin of north-central New Mexico. These aquifers are the primary groundwater resource for the cities of Santa Fe and Espanola, six Pueblo nations, and the surrounding areas. The model presented in this report is a synthesis of geologic information that includes (1) aeromagnetic and gravity data and seismic cross sections; (2) lithologic descriptions, interpretations, and geophysical logs from selected drill holes; (3) geologic maps, geologic cross sections, and interpretations; and (4) mapped faults and interpreted faults from geophysical data. Modeled faults individually or collectively affect the continuity of the rocks that contain the basin aquifers; they also help define the form of this rift basin. Structure, trend, and dip data not previously published were added; these structures are derived from interpretations of geophysical information and recent field observations. Where possible, data were compared and validated and reflect the complex relations of structures in this part of the Rio Grande rift. This interactive geologic framework model can be used as a tool to visually explore and study geologic structures within the Espanola Basin, to show the connectivity of geologic units of high and low permeability between and across faults, and to show approximate dips of the lithologic units. The viewing software can be used to display other data and information, such as drill-hole data, within this geologic framework model in three-dimensional space.
-
Improving Development and Utilization of U.S. Air Force Intelligence Officers
2009-01-01
to such jobs in September 2005, those jobs are included in this study. 6 Gregory F. Treverton and C. Bryan Gabbard , Assessing the Tradecraft of... Gabbard , Assessing the Tradecraft of Intelligence Analysis, Santa Monica, Calif.: RAND Corporation, TR-293-CCNI(A), 2008. As of March 16, 2009: http
-
Patel, Prof. Chandra Kumar Naranbhai
Indian Academy of Sciences (India)
Elected: 1995 Honorary. Patel, Prof. Chandra Kumar Naranbhai. Date of birth: 2 July 1938. Address: President & CEO, Pranalytica Inc., 1101, Colorado Avenue, Santa Monica, CA 90401, U.S.A.. Contact: Office: (+1-310) 458 0808. Residence: (+1-310) 471 6505. Fax: (+1-310) 458 0171. Email: patel@pranalytica.com.
-
Barthel, P.
This article reflects on the use of illustrations of the Moon in images of Santa Claus, on Christmas gift-wrapping paper and in children's books, in two countries which have been important in shaping the image of Santa Claus and his predecessor Sinterklaas: the USA and the Netherlands. The
-
Chicangana, G.; Pedraza, P.; Mora-paez, H.; Ordonez Aristizabal, C. O.; Vargas-Jimenez, C. A.; Kammer, A.
2012-12-01
A diffuse low deep microseismicity located overall between the Guajira peninsula and the Sierra Nevada de Santa Marta (SNSM) was registered with the recent installation (2008 to Present) of three seismological stations in northeastern Colombia by the Colombian Seismological Network (RSNC), but mainly with the Uribia station in (the) central region of La Guajira peninsula, The microseismicity is characterized by a great population of events with 1.2 Oca fault because with the GPS displacement analysis, neotectonics evidence found in faults traces associated to the Oca fault and the historical earthquake that affected the Colombian city of Santa Marta in 1834, lead us to conclude this. This is a big cortical fault that sets the limit between La Guajira peninsula and the SNSM. Its cortical characteristics were verified from geological data together with gravimetric and seismic exploration. The SNSM limits toward the southeast with the Cesar - Ranchería basin, and this basin in turn limits with the Perijá Range that is localized in the Colombia - Venezuela border. The SNSM, Cesar - Ranchería basin and Perijá Range limit toward the southwest with the Bucaramanga - Santa Marta fault (BSMF), the Oca fault toward the north, and Perijá - El Tigre fault toward the southeast defining a pyramidal orogenic complex. Using remote sensing images data with geological and regional geophysical information, we proposed that this orogenic complex was originated as a result of the Panama arc with the northwestern South America accretion. The final adjustment of the Caribbean plate (CP) between North America and South America during the Late Neogene produced the big cortical faults systems activation like Oca - Moron - El Pilar in Colombia and Venezuela toward the south of the Caribbean Plate (CP), and Motegua - Walton - Enriquillo - Plantain Garden toward the north of the CP. This situation was originated of a new subduction development of the Nazca - Cocos plates toward the south
-
International Nuclear Information System (INIS)
King, C.
1980-01-01
Subsurface soil gas along active faults in central California has been continuously monitored by the Track Etch method to test whether its radon-isotope content may show any premonitory changes useful for earthquake prediction. The monitoring network was installed in May 1975 and has since been gradually expanded to consist of more than 60 stations along a 380-km section of the San Andreas fault system between Santa Rosa and Cholame. This network has recorded several episodes, each lasting several weeks to several months, during which the radon concentration increased by a factor of approximately 2 above average along some long, but limited, fault segments (approx.100 km). These episodes occurred in different seasons and do not appear to be systematically related to changes in meteorological conditions. However, they coincided reasonably well in time and space with larger local earthquakes above a threshold magnitude of about 4.0. These episodic radon changes may be caused by a changing outgassing rate in the fault zones in response to some episodic strain changes, which incidentally caused the earthquakes
-
Komedija "Dzhuno" stala triumfatorom nezavissimogo "Oskara"
2008-01-01
Santa Monicas USAs anti 23. veebruaril üle sõltumatu kino aastaauhinnad Spirit Awards. Parimaks filmiks tunnistati Jason Reitmani "Juno", parim stsenaarium oli samale filmile Diablo Cody sulest, parim naisnäitleja Ellen Page samast filmist, parim režissöör filmi "Skafander ja liblikas" looja Julian Schnabel
-
2010-04-16
... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and..., pursuant to Section 6(a) of the National Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et... to the venture are: MXP4, Paris, FRANCE; Universal Music Group, Inc., Santa Monica, CA; Omediae, LLC...
-
Kahu, Tõnis, 1962-
2007-01-01
Heliplaatidest: Free Tallinn Trio "Full Moon", Whitesnake "1987 - 20th Anniversary Special Edition", Maroon5 "It Won't Be Soon Before Long", Uku Kuut "Santa Monica", The Afgan Whigs "Unbreakable (A Retrospective 1990-2006)", Various Artists "Box of Dub: Dubstep and Future Dub", Kubichek! "Not Enough Night", Ulrich Schnauss "Goodbye"
-
Hanson, R.T.; Li, Zhen; Faunt, C.C.
2004-01-01
into upper- and lower-aquifer systems. Ground-water inflow occurs as natural recharge in the form of streamflow infiltration and areal infiltration of precipitation along stream channels, artificial recharge from infiltration of imported water at recharge ponds and along selected stream channels, and leakage along selected transmission pipelines. Ground-water outflow occurs as evapotranspiration, stream base flow, discharge through pumpage from wells, and subsurface flow to the San Francisco Bay. The geohydrologic framework of the regional ground-water flow system was represented as six model layers. The hydraulic properties were redefined on the basis of cell-based lithologic properties that were delineated in terms of aggregate thicknesses of coarse-grained, fine-grained, and mixed textural categories. The regional aquifer systems also are dissected by several laterally extensive faults that may form at least partial barriers to the lateral flow of ground water. The spatial extent of the ground-water flow model was extended and refined to cover the entire Santa Clara Valley, including the Evergreen subregion. The temporal discretization was refined and the period of simulation was extended to 197099. The model was upgraded to MODFLOW-2000 (MF2K) and was calibrated to fit historical ground-water levels, streamflow, and land subsidence for the period 197099. The revised model slightly overestimates measured water levels with an root-mean-square error of -7.34 feet. The streamflow generally shows a good match on gaged creeks and rivers for flows greater than 1.2 cubic feet per second. The revised model also fits the measured deformation at the borehole extensometer site located near San Jose within 16 to 27 percent and the extensometer site near Sunnyvale within 3 percent of the maximum measured seasonal deformation for the deepest extensometers. The total ground-water inflow and outflow of about 225,500 acre-feet per
-
Patel, Prof. Chandra Kumar Naranbhai
Indian Academy of Sciences (India)
Patel, Prof. Chandra Kumar Naranbhai. Date of birth: 2 July 1938. Address: President & CEO, Pranalytica Inc., 1101, Colorado Avenue, Santa Monica, CA 90401, U.S.A.. Contact: Office: (+1-310) 458 0808. Residence: (+1-310) 471 6505. Fax: (+1-310) 458 0171. Email: patel@pranalytica.com. YouTube · Twitter · Facebook ...
-
A Guide to Oceanic Sedimentary Layering.
1983-07-28
Clarion Fracture Zone: Hi Clipperton Fracture Zone: E9 Panama Basin: W6 San Diego Trough: T10 Santa Monica Basin: P2 NORTH PACIFIC OCEAN, WEST General and...Causeway Miami, FL 33149 67 Attn: F. Tappert Physics Department The University of Rhode Island Kingston, RI 02881 68 Attn: C. Kaufman Department of
-
Ryan, Holly F.; Conrad, James E.; Paull, C.K.; McGann, Mary
2012-01-01
The San Diego trough fault zone (SDTFZ) is part of a 90-km-wide zone of faults within the inner California Borderland that accommodates motion between the Pacific and North American plates. Along with most faults offshore southern California, the slip rate and paleoseismic history of the SDTFZ are unknown. We present new seismic reflection data that show that the fault zone steps across a 5-km-wide stepover to continue for an additional 60 km north of its previously mapped extent. The 1986 Oceanside earthquake swarm is located within the 20-km-long restraining stepover. Farther north, at the latitude of Santa Catalina Island, the SDTFZ bends 20° to the west and may be linked via a complex zone of folds with the San Pedro basin fault zone (SPBFZ). In a cooperative program between the U.S. Geological Survey (USGS) and the Monterey Bay Aquarium Research Institute (MBARI), we measure and date the coseismic offset of a submarine channel that intersects the fault zone near the SDTFZ–SPBFZ junction. We estimate a horizontal slip rate of about 1:5 0:3 mm=yr over the past 12,270 yr.
-
Geology and ground water in north-central Santa Cruz County, California
Johnson, Michael J.
1980-01-01
North-central Santa Cruz County is underlain mainly by folded sedimentary rocks of Tertiary and Cretaceous age that have been highly fractured by movements in the San Andreas fault system. Ground water is stored in fractures within shale and mudstone formations and in intergranular pore spaces within fine- to very fine-grained sandstone and siltstone formations. Fewer than 10% of the wells yield more than 15 gallons of water per minute. The water in most wells is moderately hard to very hard, is generally of a sodium bicarbonate or calcium bicarbonate type, and commonly has excessive concentrations of iron or manganese. Of the many geologic units in the study area, only the Purisima Formation of Pliocene age has the potential to sustain well yields greater than 100 gallons per minute. (USGS)
-
Holzer, T. L.; Noce, T. E.; Bennett, M. J.
2008-12-01
Probabilities of surface manifestations of liquefaction due to a repeat of the 1868 (M6.7-7.0) earthquake on the southern segment of the Hayward Fault were calculated for two areas along the margin of San Francisco Bay, California: greater Oakland and the northern Santa Clara Valley. Liquefaction is predicted to be more common in the greater Oakland area than in the northern Santa Clara Valley owing to the presence of 57 km2 of susceptible sandy artificial fill. Most of the fills were placed into San Francisco Bay during the first half of the 20th century to build military bases, port facilities, and shoreline communities like Alameda and Bay Farm Island. Probabilities of liquefaction in the area underlain by this sandy artificial fill range from 0.2 to ~0.5 for a M7.0 earthquake, and decrease to 0.1 to ~0.4 for a M6.7 earthquake. In the greater Oakland area, liquefaction probabilities generally are less than 0.05 for Holocene alluvial fan deposits, which underlie most of the remaining flat-lying urban area. In the northern Santa Clara Valley for a M7.0 earthquake on the Hayward Fault and an assumed water-table depth of 1.5 m (the historically shallowest water level), liquefaction probabilities range from 0.1 to 0.2 along Coyote and Guadalupe Creeks, but are less than 0.05 elsewhere. For a M6.7 earthquake, probabilities are greater than 0.1 along Coyote Creek but decrease along Guadalupe Creek to less than 0.1. Areas with high probabilities in the Santa Clara Valley are underlain by latest Holocene alluvial fan levee deposits where liquefaction and lateral spreading occurred during large earthquakes in 1868 and 1906. The liquefaction scenario maps were created with ArcGIS ModelBuilder. Peak ground accelerations first were computed with the new Boore and Atkinson NGA attenuation relation (2008, Earthquake Spectra, 24:1, p. 99-138), using VS30 to account for local site response. Spatial liquefaction probabilities were then estimated using the predicted ground motions
-
Transport processes near coastal ocean outfalls
Noble, M.A.; Sherwood, C.R.; Lee, Hooi-Ling; Xu, Jie; Dartnell, P.; Robertson, G.; Martini, M.
2001-01-01
The central Southern California Bight is an urbanized coastal ocean where complex topography and largescale atmospheric and oceanographic forcing has led to numerous sediment-distribution patterns. Two large embayments, Santa Monica and San Pedro Bays, are connected by the short, very narrow shelf off the Palos Verdes peninsula. Ocean-sewage outfalls are located in the middle of Santa Monica Bay, on the Palos Verdes shelf and at the southeastern edge of San Pedro Bay. In 1992, the US Geological Survey, together with allied agencies, began a series of programs to determine the dominant processes that transport sediment and associated pollutants near the three ocean outfalls. As part of these programs, arrays of instrumented moorings that monitor currents, waves, water clarity, water density and collect resuspended materials were deployed on the continental shelf and slope information was also collected on the sediment and contaminant distributions in the region. The data and models developed for the Palos Verdes shelf suggest that the large reservoir of DDT/DDE in the coastal ocean sediments will continue to be exhumed and transported along the shelf for a long time. On the Santa Monica shelf, very large internal waves, or bores, are generated at the shelf break. The near-bottom currents associated with these waves sweep sediments and the associated contaminants from the shelf onto the continental slope. A new program underway on the San Pedro shelf will determine if water and contaminants from a nearby ocean outfall are transported to the local beaches by coastal ocean processes. The large variety of processes found that transport sediments and contaminants in this small region of the continental margin suggest that in regions with complex topography, local processes change markedly over small spatial scales. One cannot necessarily infer that the dominant transport processes will be similar even in adjacent regions.
-
Evolution of the Puente Hills Thrust Fault
Bergen, K. J.; Shaw, J. H.; Dolan, J. F.
2013-12-01
This study aims to assess the evolution of the blind Puente Hills thrust fault system (PHT) by determining its age of initiation, lateral propagation history, and changes in slip rate over time. The PHT presents one of the largest seismic hazards in the United States, given its location beneath downtown Los Angeles. The PHT is comprised of three fault segments: the Los Angeles (LA), Santa Fe Springs (SFS), and Coyote Hills (CH). The LA and SFS segments are characterized by growth stratigraphy where folds formed by uplift on the fault segments have been continually buried by sediment from the Los Angeles and San Gabriel rivers. The CH segment has developed topography and is characterized by onlapping growth stratigraphy. This depositional setting gives us the unique opportunity to measure uplift on the LA and SFS fault segments, and minimum uplift on the CH fault segment, as the difference in sediment thicknesses across the buried folds. We utilize depth converted oil industry seismic reflection data to image the fold geometries. Identifying time-correlative stratigraphic markers for slip rate determination in the basin has been a problem for researchers in the past, however, as the faunal assemblages observed in wells are time-transgressive by nature. To overcome this, we utilize the sequence stratigraphic model and well picks of Ponti et al. (2007) as a basis for mapping time-correlative sequence boundaries throughout our industry seismic reflection data from the present to the Pleistocene. From the Pleistocene to Miocene we identify additional sequence boundaries in our seismic reflection data from imaged sequence geometries and by correlating industry well formation tops. The sequence and formation top picks are then used to build 3-dimensional surfaces in the modeling program Gocad. From these surfaces we measure the change in thicknesses across the folds to obtain uplift rates between each sequence boundary. Our results show three distinct phases of
-
Leibovitz, Natalie; Ferré, Eric; Geissman, John; Gattacceca, Jérôme
2015-04-01
Fault pseudotachylytes commonly form by frictional melting due to seismic slip. These fine-grained clastic rocks result from melt quenching and may show a high concentration of fine ferromagnetic grains. These grains are potentially excellent recorders of the rock natural remanent magnetization (NRM). The magnetization processes of fault pseudotachylytes are complex and may include the following: i) near coseismic thermal remanent magnetization (TRM) acquired upon cooling of the melt; ii) coseismic lightning induced remanent magnetization (LIRM) caused by earthquake lightnings (EQL); iii) post seismic chemical remanent magnetization (CRM) related to both devitrification and alteration. Deciphering these magnetization components is crucial to the interpretation of microstructures and the timing of microstructural development. Hence the paleomagnetic record of fault pseudotachylytes provides an independent set of new constraints on coseismic and post-seismic deformation. Fault pseudotachylytes from the Santa Rosa Mountains, California host a magnetic assemblage dominated by stoichiometric magnetite, formed from the breakdown of ferromagnesian silicates and melt oxidation at high temperature. Magnetite grain size in these pseudotachylytes compares to that of magnetites formed in friction experiments. Paleomagnetic data on these 59 Ma-old fault rocks reveal not only anomalous magnetization directions, inconsistent with the coseismic geomagnetic field, but also anomalously high magnetization intensities. Here we discuss preliminary results of paleointensity experiments designed to quantify the intensity of coseismic magnetizing fields. The REM' paleointensity method is particularly well suited to investigate NRMs resulting from non-conventional and multiple magnetization processes. The anomalously high NRM recorded in a few, but not all, specimens points to LIRM as the dominant origin of magnetization.
-
International Nuclear Information System (INIS)
Svisero, D.P.; Scheibe, L.F.
1985-01-01
Magnetic, radiometric and gamma spectrometric surveys have been carried out on the Janjao diatreme which outcrops near Lajes in central-east Santa Catarina State, Brazil. The body is deeply weathered on the surface and its concentrates contain serpentinized olivine, phlogopote, pyroxenes, ilmenites, garnet and zircon. The interpretation of the magnetic anomaly revealed an irregular diatreme whose main dimensions are 50 X 190 meters. A vertical to subvertical dyke cuts the main diatreme. The radiometric anomaly as well as the potassium content helped to delineate the contacts between the diatreme and its country rocks (sandstones). Faults striking NNE controlled the emplacement of the Janjao diatreme as well as the intrusion of an alkaline dyke located near the diatreme. (Author) [pt
-
Hanson, Kathryn L.; Lettis, William R.; McLaren, Marcia; Savage, William U.; Hall, N. Timothy; Keller, Mararget A.
2004-01-01
The Hosgri Fault Zone is the southernmost component of a complex system of right-slip faults in south-central coastal California that includes the San Gregorio, Sur, and San Simeon Faults. We have characterized the contemporary style of faulting along the zone on the basis of an integrated analysis of a broad spectrum of data, including shallow high-resolution and deep penetration seismic reflection data; geologic and geomorphic data along the Hosgri and San Simeon Fault Zones and the intervening San Simeon/Hosgri pull-apart basin; the distribution and nature of near-coast seismicity; regional tectonic kinematics; and comparison of the Hosgri Fault Zone with worldwide strike-slip, oblique-slip, and reverse-slip fault zones. These data show that the modern Hosgri Fault Zone is a convergent right-slip (transpressional) fault having a late Quaternary slip rate of 1 to 3 mm/yr. Evidence supporting predominantly strike-slip deformation includes (1) a long, narrow, linear zone of faulting and associated deformation; (2) the presence of asymmetric flower structures; (3) kinematically consistent localized extensional and compressional deformation at releasing and restraining bends or steps, respectively, in the fault zone; (4) changes in the sense and magnitude of vertical separation both along trend of the fault zone and vertically within the fault zone; (5) strike-slip focal mechanisms along the fault trace; (6) a distribution of seismicity that delineates a high-angle fault extending through the seismogenic crust; (7) high ratios of lateral to vertical slip along the fault zone; and (8) the separation by the fault of two tectonic domains (offshore Santa Maria Basin, onshore Los Osos domain) that are undergoing contrasting styles of deformation and orientations of crustal shortening. The convergent component of slip is evidenced by the deformation of the early-late Pliocene unconformity. In characterizing the style of faulting along the Hosgri Fault Zone, we assessed
-
1991-10-01
SUBJECT TERMS 15. NUMBER OF PAGES engineering management information systems method formalization 60 information engineering process modeling 16 PRICE...CODE information systems requirements definition methods knowlede acquisition methods systems engineering 17. SECURITY CLASSIFICATION ji. SECURITY... Management , Inc., Santa Monica, California. CORYNEN, G. C., 1975, A Mathematical Theory of Modeling and Simula- tion. Ph.D. Dissertation, Department
-
User’s Guide to the SOLAR Semantic Analysis File
1975-04-30
PERFORMING ORGANIZATION NAME AND ADDRESS System Development Corporation 2500 Colorado Avenue, Santa Monica, Cal. 90406 II. CONTROLLING OFFICE NAME...Dordrecht: D. Pt-Idnir ppT ^üs-eb1!. Ld/ coff , George« (1971) "Tho Hole of Dpduction in 5^»^^ in Studies in IlJliyiStiS 5’JSläüiiES (Gd
-
1983-04-01
20319 Sa. ZEc ’-ASSIFICA7-ON DCVNORANG SCHEDULE ’S. DIS--iB ’Z-_N STA-EMEN t t’o ht. Report; UNLIMITED APPROVAL FOR PUBLIC RELEASE 01- U -N...Iustrial. Planni-. for a Surge in Military e; and. R-2360-AF. Santa Monica, Ca. : Rand, September 1979. 3. 3luestone, Barry, Jordan, Peter , ain Sullivan
-
Macroeconomia do Turismo Argentino em Santa Catarina
Directory of Open Access Journals (Sweden)
Roberto Meurer
2010-07-01
Full Text Available Resumo O Estado de Santa Catarina experimentou um considerável crescimento do setor de turismo nas últimas décadas. O fluxo turístico de origem argentina revelou-se um ingrediente importante dessa trajetória. Este artigo focaliza um aspecto pouco explorado, aparentemente, da participação argentina no turismo estadual: a relação entre a situação macroeconômica do país vizinho e a demanda turística por Santa Catarina lá originada. Começa-se abordando brevemente a problemática geral da macroeconomia do turismo. Depois, discorre-se sobre o crescimento desse setor em Santa Catarina, destacando a presença de argentinos. A terceira parte desenvolve uma análise baseada em tratamento estatístico de dados sobre demanda e receita geradas por esses turistas no estado, com exame das correlações envolvendo taxa de câmbio e taxa de crescimento do PIB da Argentina. Palavras-chave: turismo; Santa Catarina; turistas argentinos; economia argentina Abstract The State of Santa Catarina has witnessed a considerable development of its tourist sector in the last decades. The demand from Argentina has proved to be an important factor of that growth. This article deals with a feature of the presence of Argentinians in the state which seems to be scarcely studied: the relationship between the macroeconomic situation of Argentina and the tourist demand in Santa Catarina originated from that country. The first part of the article considers briefly the general issue of tourism macroeconomics. The second one looks upon tourism growth in Santa Catarina, stressing the presence of visitors from Argentine. The third section develops an analysis based on statistical treatment of data concerning demand and income generated by such tourists in Santa Catarina, involving correlations that consider aspects like exchange rate and the rate of GDP increase in Argentina. Keywords: tourism; Santa Catarina; tourists from Argentina; Argentina’s economy
-
Harold A. Hyde: Recollections of Santa Cruz County
Hyde, Harold A.; Jarrell, Randall; Regional History Project, UCSC Library
2002-01-01
A fifth-generation Santa Cruz County resident, Hyde has been in on the creation of organizations and institutions ranging from UCSC and Cabrillo College to the Community Foundation and the Cultural Council of Santa Cruz County. His contributions to California and Santa Cruz are documented in his oral history. Following infantry combat service with the U.S. Army in Europe during World War II and graduate studies in business at Harvard, Hyde returned to Santa Cruz County and a career a...
-
Energy Technology Data Exchange (ETDEWEB)
Ribeiro, Vanessa Biondo; Mantovani, Marta Silvia Maria, E-mail: van.biondo@gmail.com, E-mail: msmmanto@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Astronomia, Geofisica e Ciencias Atmosfericas
2012-08-15
The Santa Helena batholith is subject of many controversies concerning its geographical extension, lithological constitution, geochemical characterization and geotectonic setting. This paper aims to contribute for a better understanding of this intrusion using geophysical data (gammaspectrometric and aeromagnetic). These data were obtained through surveys contracted by the Geological Survey of Brazil (CPRM) flown over the study region. Given the compositional variety of the rocks, we analyzed the susceptibility contrast (magnetometry) and distribution of radioelements (K, Th and U, measured by gammaspectrometry) in the batholith. The resulting geophysical signature is different when comparing the northern and southern parts of the body, suggesting the presence of two distinct suites. The boundary between these two suites coincides with the location of an approximately N75 deg W oriented fault system that extends through the batholith. (author)
-
Sanchez Sierra, Johan Miguel Sebastian; Kammer, Andreas
2017-04-01
The Santa Marta Batholith (BSM) belongs to a Paleogene intrusive suite of the Santa Marta massif, an exhumed triangular block at the southern Caribbean margin. Its Paleogene age precludes its association to an active margin, although its emplacement was controlled by the flexure of the down-bent Southamerican plate. Its internal structure is outlined by a mafic border facies and a felsic core, both having a petrologic affinity to a TTG-suite. According to existing age data, the BSM consolidated sequentially from SW to NE, with a first pulse having crystallized at 56 Ma in the southern domain and a final pulse in the northern domain at 52-50 Ma. Pressures varied between 5-7 kb, corresponding to depths of 14-19 km. This study combines structural, thermochronological and geochemical data with an analysis of Anisotropy and Magnetic Susceptibility (AMS) and paleomagnetism. The SNSM had a clockwise rotation of 30 ° and the ASM results help distinguish between two fault-bounded structural domains. The southern domain is characterized by a magnetic foliation concordant to the contact of the host rock that dips toward the hinterland. The northern domain, in contrast, displays a N-S trending magnetic foliation that is oblique to the regional structural northeastern trend. This divergence is supported by the orientation of mineral lineations, enclaves and dikes. In spite of its arc signature, anomalies like enrichment in Ti, depletion of Nb-Ta and Zr-Hf, as well as flat REE patterns can be associated to the accumulation of crystallized mafic minerals from less-fractionated magmas. These data evidence mingling. Asymmetric internal organization, as indicated by a hinterland-dipping roof pendent, the structural setting at the margin of a thickened continental margin and its geochemical signature favor a scenario of a magma generation at a mid-crustal level and its consequent extrusion along a channel, that connected to the crustal bend of the continental plate that was
-
Energy Technology Data Exchange (ETDEWEB)
Resende, Marcelo Goncalves [Universidade Catolica de Brasilia, DF (Brazil); Jost, Hardy [Brasilia Univ., DF (Brazil). Inst. de Geociencias; Lima, Bruno Eustaquio Moreira; Teixeira, Alexandre de Amorim
1999-09-01
The Faina and Santa Rita greenstone belts are two N 60 deg C W trending synclinoria separated by a N 30 deg C E strike-slip fault and rest allochtonous on the adjacent Uva and Caicara granite-gneiss complexes. The belts are made up of lower metakomatiites, followed by metabasalts and thick metasedimentary sequences deposited under contrasting paleogeographic settings. In Faina, the sequence consists of two complete shelf cycles, the first resting on basalts by an erosional unconformity. In Santa Rita, the basalts give gradually place to carbonaceous metashales, unconformably overlain by metarhythmites. Provenance based on trace element geochemistry, mineral chemistry of chloride and muscovite, source-are modeling and REE elements indicate that protoliths of the first shelf cycle of Faina and the carbonaceous metashales of Santa Rita formed under the influence of a source area dominated by mafic ultramafic rocks, whilst during the sedimentation of the second shelf cycle and the metarhythmites of Santa Rita the source-area was dominated by TTG granitoids. Sm-Nd model ages of the lower sedimentary packages vary between 3.0 and 2.8 Ga and the upper between 2.7 and 2.6 Ga. These intervals coincide, respectively, with the estimated age of the underlying, and with the Sm-Nd, Rb-Sr e U-Pb ages of the main granitoids and gneisses of the adjacent complexes. The same data indicate that, during the sedimentation of the first shelf cycle of Faina and the carbonaceous metashales of Santa Rita, both basins had independent source-areas, but shared the same source during the upper sections. Weathering nature and intensity of the source-area calculated by means of geochemical a data suggest that the dramatic change of provenance from the lower to the upper sections is due to the shift from tectonically stable to unstable regimes, interpreted as resulting from the emergence of the island arc whose roots are represented by the adjacent granite-gneiss complexes. (author)
-
Hilley, G. E.; Burgmann, R.; Dumitru, T. A.; Ebert, Y.; Fosdick, J. C.; Le, K.; Levine, N. M.; Wilson, A.; Gudmundsdottir, M. H.
2010-12-01
We present eleven Apatite Fission Track (AFT) and Apatite (U-Th)/He (A-He) analyses and eighteen catchment-averaged cosmogenic 10Be denudation rates from the Santa Cruz Mountains (SCM) that resolve the unroofing history of this range over the past several Myr. This range lies within a restraining bend in the San Andreas Fault (SAF), which appears to be fixed to the crust on the northeast side of the fault based on previous work. In this view, the topographic asymmetry of the SCM reflects the advection of material southwest of the right-lateral SAF through a zone of uplift centered on the restraining bend, while material northwest of the fault remains trapped this zone. Northeast of the fault bend in the Sierra Azul block of the SCM, AFT ages adjacent to the SAF appear completely reset during the Pliocene, and show partial resetting at the periphery of the block. This suggests that total exhumation exceeded 3-4 km within the heart of the block and was SCM are near mass flux steady state over the timescales captured by the CRN (~1.5-6.5 ka). Nonetheless, the extent of topography in areas far from the bend suggests that there may be some component of regional fault-normal contraction and/or that this steady state has not been fully attained because of geomorphic lags and isostatic adjustments.
-
Evaluating the US Counter-ISIL Strategy
2017-05-25
strategy is actually addressing those critical capabilities and vulnerabilities. Finally, it explores alternative, whole-of-government strategies that...Counterterrorism Strategies as an Illustration. Santa Monica, CA: RAND Corporation , 2009. Enduring Leadership in a Dynamic World. Quadrennial Diplomacy...Evaluating the US Counter-ISIL Strategy A Monograph by LTC Jason A. Curl U.S. Army School of Advanced Military Studies United States Army
-
Predictive equations for dimensions and leaf area of coastal Southern California street trees
P.J. Peper; E.G. McPherson; S.M. Mori
2001-01-01
Tree height, crown height, crown width, diameter at breast height (dbh), and leaf area were measured for 16 species of commonly planted street trees in the coastal southern California city of Santa Monica, USA. The randomly sampled trees were planted from 1 to 44 years ago. Using number of years after planting or dbh as explanatory variables, mean values of dbh, tree...
-
The U.S. Military’s Reliance on Bottled Water During Military Operations
2011-06-17
15 Tony Perry, "Afghan Dam a Monument to US Challenges," Daily Press Newspaper, (September 7...Effects on Operations. Santa Monica, CA: Arroyo Center, RAND Corporation, 2005. Peltz, Eric, Marc L Robbins , Kenneth J Girardini, Rick Eden, John M...Defense Technical Information Center, 2005. Perry, Tony . "Afghan Dam a Monument to US Challenges." Daily Press Newspaper, September 07, 2010. Rogers
-
78 FR 781 - Investigations Regarding Eligibility To Apply for Worker Adjustment Assistance
2013-01-04
.../12 12/10/12 (State/One-Stop). 82239 Universal Music Group (State/ Santa Monica, CA....... 12/11/12 12... Brands Inc. (State/ East Windsor, CT....... 12/10/12 12/07/12 One-Stop). 82229 Designer Blinds (State/One- Omaha, NE 12/10/12 12/07/12 Stop). 82230 YP Holdings LLC (Workers)... Dallas, TX 12/10/12 12/07/12 82231...
-
Shifting Perspectives: Using Complexity Theory to Anticipate Strategic Surprise
2015-08-08
Gregory F. Treverton, and C. Bryan Gabbard , Assessing the Tradecraft of Intelligence Analysis (Santa Monica, CA: RAND Corporation, 2008), http...Treverton and Gabbard , 6. 20 a wide variety of sources collected from both open and...negatively 13. Treverton and Gabbard , 35. 14. Matthew Weaver and Saeed Kamali Dehghan, “New Protests in Iran,” The Guardian, November 4, 2009, http
-
Food Environment, Diet, and Obesity Among LA County Adults
Centers for Disease Control (CDC) Podcasts
This podcast features Nelly Mejia, winner of the journalâs 2015 Student Research Paper Contest and PhD Candidate at the Pardee RAND Graduate School in Santa Monica, California. Nelly discusses her winning paper, which examined the relationship between neighborhood food outlet locations and the diet and body mass index of adults living in Los Angeles County, California.
-
Maintaining the Balance Between Manpower, Skill Levels, and PERSTEMPO
2006-01-01
requirement processes. Models and tools that integrate these dimensions would help crys- tallize issues, identify embedded assumptions , and surface...problems will change if the planning assumptions are incorrect or if the other systems are incapable of making the nec- essary adjustments. Static...Carrillo, Background and Theory Behind the Compensations, Accessions, and Personnel ( CAPM ) Model, Santa Monica, Calif.: RAND Corporation, MR-1667
-
Directory of Open Access Journals (Sweden)
Cybelle Weinberg
2005-04-01
Full Text Available A literatura especializada tem nos mostrado que é grande a semelhança entre o comportamento alimentar das santas jejuadoras medievais e o das anoréxicas atuais. No entanto, há poucas referências sobre a existência de santas jejuadoras na América Latina. No presente trabalho, os autores salientam aspectos da vida de Santa Rosa de Lima, Patrona da América e Filipinas, que poderiam ser descritos como comportamentos anoréxicos. Comparando os aspectos psicopatológicos da vida de Santa Rosa com o comportamento das anoréxicas atuais, pareceu confirmar-se um padrão uniforme de comportamento, especialmente quanto ao aspecto imitativo, fator que poderia levar as jovens da atualidade a desenvolverem um transtorno alimentar após terem algum tipo de informação sobre o transtorno.La literatura especializada nos muestra gran similitud entre el comportamiento alimentar de las santas de la edad media que ayunaban y el de las anoréxicas de la actualidad. Hay pocas informaciones sobre santas que practicaban ayuno en Latinoamérica. En este artículo, los autores resaltan aspectos de la vida de santa Rosa de Lima, Patrona de América y Filipinas, que pueden ser considerados como comportamientos anoréxicos. Al comparar aspectos psicopatológicos de la vida de santa Rosa con el comportamiento de anoréxicas de la actualidad, parece que se confirma un modelo uniforme de comportamiento, especialmente respecto al aspecto de imitación, hecho que podría llevar a las jóvenes de hoy a desarrollar un trastorno de la alimentación luego de recibir informaciones sobre el tema.The specialized literature has shown us the great similarity between the eating habits of medieval fasting women saints and today's anorexic women. Nonetheless, there are few references to the existence of such fasting women saints in Latin America. The authors of this paper present some aspects of the life of Saint Rose of Lima, the patroness of the Americas and the Philippines, that
-
Royster, Sara
2013-01-01
Professional Santas entertain children and adults during the holiday season at all types of events. They work at shopping malls or stores; entertain crowds at parades and tree lightings; and make appearances at holiday parties, charity events, and people's homes. Most Santas work during the Christmas holiday season, which usually lasts from late…
-
Schmidt, K. M.; Minor, S. A.; Bedford, D.
2016-12-01
Employing a geomorphic process-age classification scheme, we mapped the Quaternary surficial geology of Santa Rosa (SRI) within the Channel Islands National Park. This detailed (1:12,000 scale) map represents upland erosional transport processes and alluvial, fluvial, eolian, beach, marine terrace, mass wasting, and mixed depositional processes. Mapping was motivated through an agreement with the National Park Service and is intended to aid natural resource assessments, including post-grazing disturbance recovery and identification of mass wasting and tectonic hazards. We obtained numerous detailed geologic field observations, fossils for faunal identification as age control, and materials for numeric dating. This GPS-located field information provides ground truth for delineating map units and faults using GIS-based datasets- high-resolution (sub-meter) aerial imagery, LiDAR-based DEMs and derivative raster products. Mapped geologic units denote surface processes and Quaternary faults constrain deformation kinematics and rates, which inform models of landscape change. Significant findings include: 1) Flights of older Pleistocene (>120 ka) and possibly Pliocene marine terraces were identified beneath younger alluvial and eolian deposits at elevations as much as 275 m above modern sea level. Such elevated terraces suggest that SRI was a smaller, more submerged island in the late Neogene and (or) early Pleistocene prior to tectonic uplift. 2) Structural and geomorphic observations made along the potentially seismogenic SRI fault indicate a protracted slip history during the late Neogene and Quaternary involving early normal slip, later strike slip, and recent reverse slip. These changes in slip mode explain a marked contrast in island physiography across the fault. 3) Many of the steeper slopes are dramatically stripped of regolith, with exposed bedrock and deeply incised gullies, presumably due effects related to past grazing practices. 4) Surface water presence is
-
McLaren, Marcia K.; Hardebeck, Jeanne L.; Van Der Elst, Nicholas; Unruh, Jeffrey R.; Bawden, Gerald W.; Blair, James Luke
2008-01-01
We use data from two seismic networks and satellite interferometric synthetic aperture radar (InSAR) imagery to characterize the 22 December 2003 Mw 6.5 San Simeon earthquake sequence. Absolute locations for the mainshock and nearly 10,000 aftershocks were determined using a new three-dimensional (3D) seismic velocity model; relative locations were obtained using double difference. The mainshock location found using the 3D velocity model is 35.704° N, 121.096° W at a depth of 9.7±0.7 km. The aftershocks concentrate at the northwest and southeast parts of the aftershock zone, between the mapped traces of the Oceanic and Nacimiento fault zones. The northwest end of the mainshock rupture, as defined by the aftershocks, projects from the mainshock hypocenter to the surface a few kilometers west of the mapped trace of the Oceanic fault, near the Santa Lucia Range front and the >5 mm postseismic InSAR imagery contour. The Oceanic fault in this area, as mapped by Hall (1991), is therefore probably a second-order synthetic thrust or reverse fault that splays upward from the main seismogenic fault at depth. The southeast end of the rupture projects closer to the mapped Oceanic fault trace, suggesting much of the slip was along this fault, or at a minimum is accommodating much of the postseismic deformation. InSAR imagery shows ∼72 mm of postseismic uplift in the vicinity of maximum coseismic slip in the central section of the rupture, and ∼48 and ∼45 mm at the northwest and southeast end of the aftershock zone, respectively. From these observations, we model a ∼30-km-long northwest-trending northeast-dipping mainshock rupture surface—called the mainthrust—which is likely the Oceanic fault at depth, a ∼10-km-long southwest-dipping backthrust parallel to the mainthrust near the hypocenter, several smaller southwest-dipping structures in the southeast, and perhaps additional northeast-dipping or subvertical structures southeast of the mainshock plane
-
History of metal pollution in the Southern California Bight: an update
International Nuclear Information System (INIS)
Finney, B.P.; Huh, C.
1989-01-01
Box cores collected in 1985 and 1986 along an offshore transect in the Santa Monica Basin, CA, were analyzed for organic carbon, calcium carbonate, U-series radionuclides, and a suite of major and minor elements. Downcore profiles of metals and organic carbon reflect anthropogenic influence and diagenetic processes. The deep basin cores show pronounced subsurface maxima in Pb, Zn, Cr, and organic carbon during the time interval 1960-1970. Increases from the base of the core to this time horizon are consistent with increasing anthropogenic inputs to the Santa Monica Basin. The near-surface decreases in heavy-metal accumulation reflect recent improvements in waste water treatment. Sediment compositions cannot be fully explained by simple mixtures of sewage particles and natural sediment because of factors such as diagenesis of sewage during transport and sedimentation, additional metal sources, and variations in surface water productivity. The yellow-brown surface layer in deep basin cores is relatively enriched in Fe, Co, Cu, and P. This layer forms by reduction of Fe followed by upward diffusion and precipitation as amorphous oxyhydroxides; P, Cu, and Co, released during early diagenesis, are associated with this phase
-
Groundwater quality in the Coastal Los Angeles Basin, California
Fram, Miranda S.; Belitz, Kenneth
2012-01-01
The Coastal Los Angeles Basin study unit is approximately 860 square miles and consists of the Santa Monica, Hollywood, West Coast, Central, and Orange County Coastal Plain groundwater basins (California Department of Water Resources, 2003). The basins are bounded in part by faults, including the Newport-Inglewood fault zone, and are filled with Holocene-, Pleistocene-, and Pliocene-age marine and alluvial sediments. The Central Basin and Orange County Coastal Plain are divided into a forebay zone on the northeast and a pressure zone in the center and southwest. The forebays consist of unconsolidated coarser sediment, and the pressure zones are characterized by lenses of coarser sediment divided into confined to semi-confined aquifers by lenses of finer sediments. The primary aquifer system in the study unit is defined as those parts of the aquifer system corresponding to the perforated intervals of wells listed in the California Department of Public Health (CDPH) database of public-supply wells. The majority of public-supply wells are drilled to depths of 510 to 1,145 feet, consist of solid casing from the land surface to a depth of about 300 to 510 feet, and are perforated below the solid casing. Water quality in the primary aquifer system may differ from that in the shallower and deeper parts of the aquifer systems.
-
Fault morphology of the lyo Fault, the Median Tectonic Line Active Fault System
後藤, 秀昭
1996-01-01
In this paper, we investigated the various fault features of the lyo fault and depicted fault lines or detailed topographic map. The results of this paper are summarized as follows; 1) Distinct evidence of the right-lateral movement is continuously discernible along the lyo fault. 2) Active fault traces are remarkably linear suggesting that the angle of fault plane is high. 3) The lyo fault can be divided into four segments by jogs between left-stepping traces. 4) The mean slip rate is 1.3 ～ ...
-
2017-01-01
Consider ways to leverage existing DoD data to continue to explore connections among problematic behaviors. Prevention strategies Review the effects that...Hepner, Targeting Alcohol Misuse: A Promising Strategy for Reducing Military Sexual Assaults? Santa Monica, Calif.: RAND Corporation , RR-538-OSD, 2014...and linking permissions, please visit www.rand.org/pubs/permissions. The RAND Corporation is a research organization that develops solutions to public
-
Early Results on Activations and the Earnings of Reservists
2005-01-01
compensation for the additional inconvenience, effort, and danger of such deployments. In the language of labor economics , they could be viewed as...Draft Lottery: Evidence from Social Security Administrative Records,” American Economic Review, June 1990, reprinted in Labor Economics , O. Ashenfelter... Labor Economics , January 1994. Asch, Beth J., and James R. Hosek. 1999. Military Compensation: Trends and Policy Options. Santa Monica, CA: RAND
-
Operational Intelligence and Operational Design: Thinking about Operational Art
2011-06-01
captured it best when he wrote, ―Operational intelligence is more or less the fusion of 45 Kent... Market Garden….‖34 Additionally, Drea concluded that the strong-minded General Douglas MacArthur‘s ―sense of destiny‖ shaped his strategic concepts...1960. Memorandum RM-4172-ISA, Santa Monica, CA: The RAND Corporation, September 1964. The Bible . New International Version. Hitchcock, Walter T., ed
-
Schmidt, Kevin M.; Ellen, Stephen D.; Peterson, David M.
2014-01-01
Damage to pavement and near-surface utility pipes, caused by the 17 October 1989, Loma Prieta earthquake, provides evidence for ground deformation in a 663 km2 area near the southwest margin of the Santa Clara Valley, California (USA). A total of 1427 damage sites, collected from more than 30 sources, are concentrated in four zones, three of which lie near previously mapped faults. In one of these zones, the channel lining of Los Gatos Creek, a 2-km-long concrete strip trending perpendicular to regional geologic structure, was broken by thrusts that were concentrated in two belts, each several tens of meters wide, separated by more than 300 m of relatively undeformed concrete.
-
Fault tolerant control based on active fault diagnosis
DEFF Research Database (Denmark)
Niemann, Hans Henrik
2005-01-01
An active fault diagnosis (AFD) method will be considered in this paper in connection with a Fault Tolerant Control (FTC) architecture based on the YJBK parameterization of all stabilizing controllers. The architecture consists of a fault diagnosis (FD) part and a controller reconfiguration (CR......) part. The FTC architecture can be applied for additive faults, parametric faults, and for system structural changes. Only parametric faults will be considered in this paper. The main focus in this paper is on the use of the new approach of active fault diagnosis in connection with FTC. The active fault...... diagnosis approach is based on including an auxiliary input in the system. A fault signature matrix is introduced in connection with AFD, given as the transfer function from the auxiliary input to the residual output. This can be considered as a generalization of the passive fault diagnosis case, where...
-
Gath, Eldon; Gonzalez, Tania; Roe, Joe; Buchiarelli, Philip; Kenny, Miles
2014-05-01
Results of geotechnical studies for the Westside Subway were disclosed in a public hearing on Oct. 19, 2011, showing new "active faults" of the Santa Monica fault and the West Beverly Hills Lineament (WBHL), identified as a northern extension of the Newport-Inglewood fault. Presentations made spoke of the danger posed by these faults, the possibility of killing people, and how it was good news that these faults had been discovered now instead of later. The presentations were live and are now memorialized as YouTube videos, (http://www.youtube.com/watch?v=Omx2BTIpzAk and others). No faults had been physically exposed or observed by the study; the faults were all interpreted from cone penetrometer probes, supplemented by core borings and geophysical transects. Several of the WBHL faults traversed buildings of the Beverly Hills High School (BHHS), triggering the school district to geologically map and characterize these faults for future planning efforts, and to quantify risk to the students in the 1920's high school building. 5 exploratory trenches were excavated within the high school property, 12 cone penetrometers were pushed, and 26-cored borings were drilled. Geologic logging of the trenches and borings and interpretation of the CPT data failed to confirm the presence of the mapped WBHL faults, instead showing an unfaulted, 3° NE dipping sequence of mid-Pleistocene alluvial fan deposits conformably overlying an ~1 Ma marine sand. Using 14C, OSL, and soil pedology for stratigraphic dating, the BHHS site was cleared from fault rupture hazards and the WBHL was shown to be an erosional margin of Benedict Canyon, partially buttressed by 40-200 ka alluvial deposits from Benedict Wash. The consequence of the Westside Subway's active fault maps has been the unexpected expenditure of millions of dollars for emergency fault investigations at BHHS and several other private properties within a densely developed urban highrise environment. None of these studies have found
-
Roberts, Dar A.; Church, Richard; Ustin, Susan L.; Brass, James A. (Technical Monitor)
2001-01-01
Large urban wildfires throughout southern California have caused billions of dollars of damage and significant loss of life over the last few decades. Rapid urban growth along the wildland interface, high fuel loads and a potential increase in the frequency of large fires due to climatic change suggest that the problem will worsen in the future. Improved fire spread prediction and reduced uncertainty in assessing fire hazard would be significant, both economically and socially. Current problems in the modeling of fire spread include the role of plant community differences, spatial heterogeneity in fuels and spatio-temporal changes in fuels. In this research, we evaluated the potential of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and Airborne Synthetic Aperture Radar (AIRSAR) data for providing improved maps of wildfire fuel properties. Analysis concentrated in two areas of Southern California, the Santa Monica Mountains and Santa Barbara Front Range. Wildfire fuel information can be divided into four basic categories: fuel type, fuel load (live green and woody biomass), fuel moisture and fuel condition (live vs senesced fuels). To map fuel type, AVIRIS data were used to map vegetation species using Multiple Endmember Spectral Mixture Analysis (MESMA) and Binary Decision Trees. Green live biomass and canopy moisture were mapped using AVIRIS through analysis of the 980 nm liquid water absorption feature and compared to alternate measures of moisture and field measurements. Woody biomass was mapped using L and P band cross polarimetric data acquired in 1998 and 1999. Fuel condition was mapped using spectral mixture analysis to map green vegetation (green leaves), nonphotosynthetic vegetation (NPV; stems, wood and litter), shade and soil. Summaries describing the potential of hyperspectral and SAR data for fuel mapping are provided by Roberts et al. and Dennison et al. To utilize remotely sensed data to assess fire hazard, fuel-type maps were translated
-
International Nuclear Information System (INIS)
Resende, Marcelo Goncalves; Jost, Hardy; Lima, Bruno Eustaquio Moreira; Teixeira, Alexandre de Amorim
1999-01-01
The Faina and Santa Rita greenstone belts are two N 60 deg C W trending synclinoria separated by a N 30 deg C E strike-slip fault and rest allochtonous on the adjacent Uva and Caicara granite-gneiss complexes. The belts are made up of lower metakomatiites, followed by metabasalts and thick metasedimentary sequences deposited under contrasting paleogeographic settings. In Faina, the sequence consists of two complete shelf cycles, the first resting on basalts by an erosional unconformity. In Santa Rita, the basalts give gradually place to carbonaceous metashales, unconformably overlain by metarhythmites. Provenance based on trace element geochemistry, mineral chemistry of chloride and muscovite, source-are modeling and REE elements indicate that protoliths of the first shelf cycle of Faina and the carbonaceous metashales of Santa Rita formed under the influence of a source area dominated by mafic ultramafic rocks, whilst during the sedimentation of the second shelf cycle and the metarhythmites of Santa Rita the source-area was dominated by TTG granitoids. Sm-Nd model ages of the lower sedimentary packages vary between 3.0 and 2.8 Ga and the upper between 2.7 and 2.6 Ga. These intervals coincide, respectively, with the estimated age of the underlying, and with the Sm-Nd, Rb-Sr e U-Pb ages of the main granitoids and gneisses of the adjacent complexes. The same data indicate that, during the sedimentation of the first shelf cycle of Faina and the carbonaceous metashales of Santa Rita, both basins had independent source-areas, but shared the same source during the upper sections. Weathering nature and intensity of the source-area calculated by means of geochemical a data suggest that the dramatic change of provenance from the lower to the upper sections is due to the shift from tectonically stable to unstable regimes, interpreted as resulting from the emergence of the island arc whose roots are represented by the adjacent granite-gneiss complexes. (author)
-
Fault detection and isolation in systems with parametric faults
DEFF Research Database (Denmark)
Stoustrup, Jakob; Niemann, Hans Henrik
1999-01-01
The problem of fault detection and isolation of parametric faults is considered in this paper. A fault detection problem based on parametric faults are associated with internal parameter variations in the dynamical system. A fault detection and isolation method for parametric faults is formulated...
-
2018-01-01
these risks, nor did it explore the potential trade-offs required to execute the revised QDR strategy . It did, however, note that the portfolio of... Corporation , Santa Monica, Calif. © Copyright 2018 RAND Corporation R® is a registered trademark. Limited Print and Electronic Distribution Rights...commercial use. For information on reprint and linking permissions, please visit www.rand.org/pubs/permissions.html. The RAND Corporation is a research
-
Using New Media For Information Operations: A Syrian Insurgency Case Study
2014-04-01
Sources,” 4. 30. Beifuss and Bellini, Branding Terror, 11. 31. Ibid., 12. 32. Giordano , “Study of a Storm,” 22. 33. Ibid., 22. 34. Historic...Practice. Westport, CT: Praeger Security International, 1964. Giordano , Angela Maria. “Study of a Storm: An Analysis of Zapatista Propaganda...Graham E. Fuller, and Melissa Fuller. The Zapatista Social Netwar in Mexico. Santa Monica, CA: RAND, 1998. Setrakian, Lara, and Alex Zerden. “Mapping
-
Interspecies Scaling in Blast Neurotrauma
2015-08-27
and services to assist recovery . Santa Monica, CA: Rand Corporation. Taylor, PA and Ford, CC. 2009. "Simulation of Blast-Induced Early-Time...reducing this burden, to Washington Headquarters Services , Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite... Warden 2006). As of 2008 it was estimated that approximately 19% or 320,000 OIF/OEF veterans had sustained a TBI (Tanielian et al. 2008). In 2011 a
-
Assessing Post Conflict State Building Efforts
2013-03-01
Develop a global partnership for development Target: Develop further an open, rule-based, predictable, non-discriminatory trading and finance system...Beginner’s Guide to Nation-Building (Santa Monica, CA: Rand Corporation ), 2007, xvii. 15 Samuel Berger, Brent Scowcroft, and William L. Nash, “In...The Beginner’s Guide, xxi. 25 Richard A. Berk and Peter H. Rossi, Thinking About Program Evaluation 2, (Thousand Oaks, CA: Sage Publications, 1999
-
The Challenge of Small Satellite Systems to the Space Security Environment
2012-03-01
Space, 1945–1995, (New York: Dodd, Mead & Company, Inc . 1984), 142. 40 Moltz, The Politics of Space Security, 93. 41William E. Burrows, Deep Black...Experimental World Circling Spaceship,” Report No. SE: 11827, Douglas Aircraft Company, Inc ., Santa Monica Plant Engineering Division, Contract WBB-038... Nike Zeus nuclear missile as a means to track and intercept targeted adversarial satellites. The commonality of antiballistic missile (ABM) and ASAT
-
Prolonged Cycle Times and Schedule Growth in Defense Acquisition: A Literature Review
2014-01-01
10, 1979. DAU—See Defense Acquisition University. Decker, Gilbert F., Louis C. Wagner, William H. Forster, David M. Maddox, George T. Singley, and...March 2008. Bibliography 77 Johnson, Collie J., “Pentagon Systems Acquisition Director Speaks to Graduates of APMC 99-1,” PM Magazine, May–June...1999, pp. 8–11. Kassing, David , R. William Thomas, Frank Camm, and Carolyn Wong, How Funding Instability Affects Army Programs, Santa Monica, Calif
-
Troubled Partnership. A History of U.S.-Japan Collaboration on the
1995-01-01
and intellectual contributions of Project AIR FORCE managers, particularly Michael Kennedy, Dennis Smallwood , Jeff Drezner, and Robert Roll. Cindy...June 14-20, 1993b. Lerner, Preston, "Stall Tactics," Air & Space, April/May 1991. Levin, Norman D., Japan’s Changing Defense Posture, Santa...Monica, Calif: RAND, N-2739-OSD, 1988. Levin, Norman D., Mark Lorell, and Arthur Alexander, The Wary Warriors: Future Directions in Japanese Security
-
A Qualitative Study of Affordability: Virginia and San Antonio Class Programs
2014-06-01
that actual costs and operational tempos resemble original assumptions is the most uncertain aspect of sustainment costs. Operators must respond to a...SSN 774 through SSN 787; this represents 47% of the total inventory, a typical variation for ships from the acquisition standard of 10%. Even... Goldberg , M., … MacKinnon, M. (1994). The U.S. submarine production base (MR-456-OSD). Santa Monica, CA: RAND. Blickstein, I. United States. Department
-
Air & Space Power Journal. Volume 26, Number 5. September-October 2012
2012-10-01
of their air support through variations in doctrine or expansion of available options to meet the mission requirements. Envisioning mul...Alfred Goldberg and Lt Col Donald Smith, Army–Air Force Relations: The Close Air Support Issue, R-906-PR (Santa Monica, CA: RAND, October 1971), 16...most impor tant near term priority” and recognizing it as “the most effective way to generate capacity, increase tempo , [and achieve] maximum
-
1981-09-01
corresponds to the same square footage that consumed the electrical energy. 3. The basic assumptions of multiple linear regres- sion, as enumerated in...7. Data related to the sample of bases is assumed to be representative of bases in the population. Limitations Basic limitations on this research were... Ratemaking --Overview. Rand Report R-5894, Santa Monica CA, May 1977. Chatterjee, Samprit, and Bertram Price. Regression Analysis by Example. New York: John
-
African Governments’ Response to Insurgency
2016-09-01
extended period of time while possessing the means to address it? Through a comparative approach, drawing on academic research on Uganda and the Lord’s...to address it? Through a comparative approach, drawing on academic research on Uganda and the Lord’s Resistance Army and Nigeria and Boko Haram...and Charles Wolf, Rebellion and Authority: An Analytic Essay on Insurgent Conflicts (Santa Monica: RAND, 1970), 52; Andrew M. Scott et al
-
International Nuclear Information System (INIS)
Cumbest, R.J.
2000-01-01
This study compares the faulting observed on the Savannah River Site and vicinity with the faults of the Atlantic Coastal Fault Province and concludes that both sets of faults exhibit the same general characteristics and are closely associated. Based on the strength of this association it is concluded that the faults observed on the Savannah River Site and vicinity are in fact part of the Atlantic Coastal Fault Province. Inclusion in this group means that the historical precedent established by decades of previous studies on the seismic hazard potential for the Atlantic Coastal Fault Province is relevant to faulting at the Savannah River Site. That is, since these faults are genetically related the conclusion of ''not capable'' reached in past evaluations applies.In addition, this study establishes a set of criteria by which individual faults may be evaluated in order to assess their inclusion in the Atlantic Coast Fault Province and the related association of the ''not capable'' conclusion
-
Directory of Open Access Journals (Sweden)
Laise de Holanda Cavalcanti
1994-07-01
Full Text Available Considerando a inexistência de registros de ocorrência de Myxomycetes em Florianópolis, realizou- se coletas nas matas da Lagoa do Peri e Lagoa da Conceição, em 1990, assinalando-se as seguintes espécies : Lycogala exiguum Morg. (Enteridiaceae ; Cribraria languescem Rex, C. vulgaris Sclir. (Cribrariaceae ; Arcyria cinerea ( Bull. Pers. , Hemitrichia serpula ( Scop. Rost., H. calyculata ( Speg. Farr e Hemitrichia sp (Trichiaceae ; Stemonitis fusca Roth. e S. smithii Macbr. (Stemonitaceae. Exsicatas encontram-se depositadas no herbário UFP. Lycogala exiguum é assinalada pela primeira vez para Santa Catarina, Cribraria languescens para a região Sul e Cribraria vulgaris para o Brasil. O levantamento eleva para 47 o número de espécies referidas para o Estado de Santa Catarina. Fornece-se um histórico do estudo deste qrupo de organismos em Santa Catarina bem como a área de ocorrência de cada espécie no Estado e nas diferentes regiões do Brasil.A survey on Myxomycetes was made in the woods of Lagoa do Peri and Lagoa da Conceição in 1990, considering the absence of reports of this kind for the city of Florianópolis, when the following species were registered: Lycogala exiguum Morg. (Enteridiaceae; Cribraria languescem Rex, C. vulgaris Schr. (Cribrariaceae; Arcyria cinerea (Bull. Pers. Hemitrichia serpula (Scop. Rost., H. calyculata (Speg. Fair and Hemitrichia sp (Trichiaceae; Stemonitis fusca Roth, and S. smithii Macbr. (Stemonitaceae. Exicates are deposited at the herbarium UFP. Lycogala exiguum is noted for the first time in the state of Santa Catarina, Cribraria languescem in the South and Cribraria vulgaris in Brazil. The survey raises up the number of registers refered to the state of Santa Catarina to 47 species. A review of the studies on this group of organisms in Santa Catarina is given as well as the area where each species occur in this state and in different regions of Brazil.
-
Crustal-scale tilting of the central Salton block, southern California
Dorsey, Rebecca; Langenheim, Victoria
2015-01-01
The southern San Andreas fault system (California, USA) provides an excellent natural laboratory for studying the controls on vertical crustal motions related to strike-slip deformation. Here we present geologic, geomorphic, and gravity data that provide evidence for active northeastward tilting of the Santa Rosa Mountains and southern Coachella Valley about a horizontal axis oriented parallel to the San Jacinto and San Andreas faults. The Santa Rosa fault, a strand of the San Jacinto fault zone, is a large southwest-dipping normal fault on the west flank of the Santa Rosa Mountains that displays well-developed triangular facets, narrow footwall canyons, and steep hanging-wall alluvial fans. Geologic and geomorphic data reveal ongoing footwall uplift in the southern Santa Rosa Mountains, and gravity data suggest total vertical separation of ∼5.0–6.5 km from the range crest to the base of the Clark Valley basin. The northeast side of the Santa Rosa Mountains has a gentler topographic gradient, large alluvial fans, no major active faults, and tilted inactive late Pleistocene fan surfaces that are deeply incised by modern upper fan channels. Sediments beneath the Coachella Valley thicken gradually northeast to a depth of ∼4–5 km at an abrupt boundary at the San Andreas fault. These features all record crustal-scale tilting to the northeast that likely started when the San Jacinto fault zone initiated ca. 1.2 Ma. Tilting appears to be driven by oblique shortening and loading across a northeast-dipping southern San Andreas fault, consistent with the results of a recent boundary-element modeling study.
-
From fault classification to fault tolerance for multi-agent systems
Potiron, Katia; Taillibert, Patrick
2013-01-01
Faults are a concern for Multi-Agent Systems (MAS) designers, especially if the MAS are built for industrial or military use because there must be some guarantee of dependability. Some fault classification exists for classical systems, and is used to define faults. When dependability is at stake, such fault classification may be used from the beginning of the system's conception to define fault classes and specify which types of faults are expected. Thus, one may want to use fault classification for MAS; however, From Fault Classification to Fault Tolerance for Multi-Agent Systems argues that
-
Summary: beyond fault trees to fault graphs
International Nuclear Information System (INIS)
Alesso, H.P.; Prassinos, P.; Smith, C.F.
1984-09-01
Fault Graphs are the natural evolutionary step over a traditional fault-tree model. A Fault Graph is a failure-oriented directed graph with logic connectives that allows cycles. We intentionally construct the Fault Graph to trace the piping and instrumentation drawing (P and ID) of the system, but with logical AND and OR conditions added. Then we evaluate the Fault Graph with computer codes based on graph-theoretic methods. Fault Graph computer codes are based on graph concepts, such as path set (a set of nodes traveled on a path from one node to another) and reachability (the complete set of all possible paths between any two nodes). These codes are used to find the cut-sets (any minimal set of component failures that will fail the system) and to evaluate the system reliability
-
Solum, J.G.; Davatzes, N.C.; Lockner, D.A.
2010-01-01
The presence of clays in fault rocks influences both the mechanical and hydrologic properties of clay-bearing faults, and therefore it is critical to understand the origin of clays in fault rocks and their distributions is of great importance for defining fundamental properties of faults in the shallow crust. Field mapping shows that layers of clay gouge and shale smear are common along the Moab Fault, from exposures with throws ranging from 10 to ???1000 m. Elemental analyses of four locations along the Moab Fault show that fault rocks are enriched in clays at R191 and Bartlett Wash, but that this clay enrichment occurred at different times and was associated with different fluids. Fault rocks at Corral and Courthouse Canyons show little difference in elemental composition from adjacent protolith, suggesting that formation of fault rocks at those locations is governed by mechanical processes. Friction tests show that these authigenic clays result in fault zone weakening, and potentially influence the style of failure along the fault (seismogenic vs. aseismic) and potentially influence the amount of fluid loss associated with coseismic dilation. Scanning electron microscopy shows that authigenesis promotes that continuity of slip surfaces, thereby enhancing seal capacity. The occurrence of the authigenesis, and its influence on the sealing properties of faults, highlights the importance of determining the processes that control this phenomenon. ?? 2010 Elsevier Ltd.
-
PLA Aerospace Power: A Primer on Trends in China’s Military Air, Space, and Missile Forces
2017-10-24
Strategic Deterrence,” Santa Monica: The RAND Corporation , 2016, p. 43. 30 The Science of Strategy , 1987, p. 115 cited in Chase, p. 12. 69 PLA Aerospace...branches of the People’s Liberation Army’s aerospace assets and forces, CASI will also explore topics and areas related to the support infrastructure...regional security strategy that involves deterring any adversary, and, should deterrence fail, prevailing in combat. At the start of 2016, Chinese
-
Canadian Civil-Military Relations, 1939-1941: A Case Study in Strategic Dialogue
2011-07-01
Rand Report R-2154-AF (Santa Monica: RAND, 1977) and Ken Booth, Strategy and Ethnocentrism (London: Croon Helm, 1979). 4 DRDC CORA TM 2011-116...committee and staffed by a single full-time task force. Fulfilling Canada’s commitment in Afghanistan requires the political energy only a Prime Minister...The men staffing External Affairs in the interwar years have been held up as the primary example of the new breed of public servant who brought
-
A Summary/Overview of Ejector Augmentor Theory and Performance. Volume 2. Bibliography
1979-09-01
229. 1/3 DPDF A, E,T Brown, G. A., and Levy, E. K., "Liquid Metal Magnetohydrodynamic SS F, Power Generation with Condensing Ejector Cycles’’, Paper SM ...SPSF C, Duvvuri, T., and Raghunath , B., "Theoretical Study of Turbulent SS F Mixing Along Curved Jet Boundaries", Duvvuri Research Associates Tech. Rep...Engine Cooling System for a Turbojet Powered Aircraft, Report No. SM -14020, Douglas Aircraft Company, Incorporated, Santa Monica, California, May
-
Broken Mirrors: Tracing Issues in Building Partner Capacity
2016-06-01
Partnerships in Afghanistan and Beyond: Challenges and Best Practices from Afghanistan, Iraq, and Colombia (Santa Monica, CA: RAND, 2015). 10 tracing...attack on U.S. soil planned from within Afghanistan. U.S. military intervention led to a nation-building effort, followed by a COIN mission, to what...capabilities that would no longer be available.107 E. CONCLUSION The U.S. intervention was a response to an attack on American soil , planned by Al Qaeda from
-
Training the People’s Liberation Army Air Force Surface-to-Air Missile (SAM) Forces
2016-01-01
Kyle Brady, and Lyle J. Morris , The U.S.-China Military Scorecard: Forces, Geography, and the Evolving Balance of Power, 1996–2017, Santa Monica, Calif...training articles from January 1, 2004, to December 31, 2006.72 At that time, KJB was published only three times a week ( Tuesdays , Thursdays, and...DeLuca, David A. Shlapak, David R. Frelinger, Burgess Laird, Kyle Brady, and Lyle J. Morris , The U.S.-China Military Scorecard: Forces, Geography
-
Intercontinental Ballistic Missiles and their Role in Future Nuclear Forces
2017-05-01
while minimizing collateral damage, speed of response, and in-flight survivability. Without ICBMs, the US nuclear deterrent force would probably...September 2013. Delpech, Thérèse. Nuclear Deterrence in the 21st Century: Lessons from the Cold War for a New Era of Strategic Piracy. Santa Monica, CA...to Minimal Deterrence : A New Nuclear Policy on the Path toward Eliminating Nuclear Weapons. Occasion Paper no. 7. Washington, DC: Natural Resources
-
The Biggest Stick: The Employment of Artillery Units in Counterinsurgency
2011-06-10
83 59Riley Sunderland, Organizing Counterinsurgency in Malaya, 1947-1960 (Santa Monica, CA: RAND, 1964), 17. 60The Virgin Soldiers, ―British...on the night of 30-31 January 1968 in the midst of the largest holiday on the Vietnamese calendar, and it culminated within two weeks except in Hue...executed bodies per month to a pacified environment in which locals brought American soldiers food on holidays .191 The glaring negative effect was
-
Investigating Traffic Avoidance Maneuver Preferences of Unmanned Aircraft Operators
2016-06-13
aircraft in the NAS under instrument flight rules ( IFR ), in radio communications with ATC, and with a traffic display highlighting traffic within 80...Lincoln Laboratory developed uncorrelated encounter model [13] for evaluation of a preliminary pilot model. The UAS was assumed to be on an IFR ...Vol. 59, No. 1, Human Factors and Ergonomics Society, Santa Monica, CA, 2015, pp. 45-49. [10] Rorie, R. C., Fern, L., and Shively R. J., “The impact
-
Santa Fe Alliance for Science: The First Eight Years
Eisenstein, Robert A.
2013-04-01
The Santa Fe Alliance for Science (SFAFS) was founded in May, 2005. SFAFS exists to provide assistance in K-14 math and science education in the greater Santa Fe area. It does this via extensive programs (1) in math and science tutoring at Santa Fe High School, Santa Fe Community College and to a lesser degree at other schools, (2) science fair advising and judging, (3) its ``Santa Fe Science Cafe for Young Thinkers'' series, (4) a program of professional enrichment for K-12 math and science teachers, and (5) a fledging math intervention program in middle school math. Well over 150 STEM professionals, working mostly as volunteers, have contributed since our beginning. Participation by students, parents and teachers has increased dramatically over the years, leading to much more positive views of math and science, especially among elementary school students and teachers. Support from the community and from local school districts has been very strong. I will present a brief status report on SFAFS activities, discuss some of the lessons learned along the way and describe briefly some ideas for the future. More information can be found at the SFAFS website, www.sfafs.org.
-
Fault tolerant control for uncertain systems with parametric faults
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Poulsen, Niels Kjølstad
2006-01-01
A fault tolerant control (FTC) architecture based on active fault diagnosis (AFD) and the YJBK (Youla, Jarb, Bongiorno and Kucera)parameterization is applied in this paper. Based on the FTC architecture, fault tolerant control of uncertain systems with slowly varying parametric faults...... is investigated. Conditions are given for closed-loop stability in case of false alarms or missing fault detection/isolation....
-
LAMPF first-fault identifier for fast transient faults
International Nuclear Information System (INIS)
Swanson, A.R.; Hill, R.E.
1979-01-01
The LAMPF accelerator is presently producing 800-MeV proton beams at 0.5 mA average current. Machine protection for such a high-intensity accelerator requires a fast shutdown mechanism, which can turn off the beam within a few microseconds of the occurrence of a machine fault. The resulting beam unloading transients cause the rf systems to exceed control loop tolerances and consequently generate multiple fault indications for identification by the control computer. The problem is to isolate the primary fault or cause of beam shutdown while disregarding as many as 50 secondary fault indications that occur as a result of beam shutdown. The LAMPF First-Fault Identifier (FFI) for fast transient faults is operational and has proven capable of first-fault identification. The FFI design utilized features of the Fast Protection System that were previously implemented for beam chopping and rf power conservation. No software changes were required
-
2010-07-01
... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Waters of Santa Rosa Sound and..., Fla. 334.730 Section 334.730 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.730 Waters of Santa Rosa...
-
Schwartz, David P.; Haeussler, Peter J.; Seitz, Gordon G.; Dawson, Timothy E.
2012-01-01
The propagation of the rupture of the Mw7.9 Denali fault earthquake from the central Denali fault onto the Totschunda fault has provided a basis for dynamic models of fault branching in which the angle of the regional or local prestress relative to the orientation of the main fault and branch plays a principal role in determining which fault branch is taken. GeoEarthScope LiDAR and paleoseismic data allow us to map the structure of the Denali-Totschunda fault intersection and evaluate controls of fault branching from a geological perspective. LiDAR data reveal the Denali-Totschunda fault intersection is structurally simple with the two faults directly connected. At the branch point, 227.2 km east of the 2002 epicenter, the 2002 rupture diverges southeast to become the Totschunda fault. We use paleoseismic data to propose that differences in the accumulated strain on each fault segment, which express differences in the elapsed time since the most recent event, was one important control of the branching direction. We suggest that data on event history, slip rate, paleo offsets, fault geometry and structure, and connectivity, especially on high slip rate-short recurrence interval faults, can be used to assess the likelihood of branching and its direction. Analysis of the Denali-Totschunda fault intersection has implications for evaluating the potential for a rupture to propagate across other types of fault intersections and for characterizing sources of future large earthquakes.
-
Geologic hazards in the region of the Hurricane fault
Lund, W.R.
1997-01-01
common in southwestern Utah where it has damaged roads, canal embankments, and water-retention structures. Several unexplained sinkholes near the town of Hurricane possibly are the result of collapse of subsurface volcanic features. Geologic formations associated with slope failures along or near the Hurricane fault include rocks of both Mesozoic and Tertiary age. Numerous landslides are present in these materials along the Hurricane Cliffs, and the Petrified Forest Member of the Chinle Formation is commonly associated with slope failures where it crops out in the St. George Basin. Steep slopes and numerous areas of exposed bedrock make rock fall a hazard in the St. George Basin. Debris flows and debris floods in narrow canyons and on alluvial fans often accompany intense summer cloudburst thunderstorms. Flooded basements and foundation problems associated with shallow ground water are common on benches north of the Santa Clara River in the city of Santa Clara. Stream flooding is the most frequently occurring and destructive geologic hazard in southwestern Utah. Since the 1850s, there have been three major riverine (regional) floods and more than 300 damaging flash floods. Although a variety of flood control measures have been implemented, continued rapid growth in the region is again increasing vulnerability to flood hazards. Site-specific studies to evaluate geologic hazards and identify hazard-reduction measures are recommended prior to construction to reduce the need for costly repair, maintenance, or replacement of improperly placed or protected facilities.
-
Local smoke-free policy development in Santa Fe, Argentina.
Sebrié, Ernesto M; Glantz, Stanton A
2010-04-01
To describe the process of approval and implementation of a comprehensive smoke-free law in the province of Santa Fe, Argentina, between 2005 and 2009. Review of the Santa Fe smoke-free legislation, articles published in local newspapers and documentation on two lawsuits filed against the law, and interviews with key individuals in Santa Fe. Efforts to implement smoke-free policies in Santa Fe began during the 1990s without success, and resumed in 2005 when the provincial Legislature approved the first 100% smoke-free subnational law in Argentina. There was no strong opposition during the discussions within the legislature. As in other parts of the world, pro-tobacco industry interests attempted to block the implementation of the law using well known strategies. These efforts included a controversy media campaign set up, the creation of a hospitality industry association and a virtual smokers' rights group, the introduction of a counterproposal seeking modification of the law, the challenge of the law in the Supreme Court, and the proposal of a weak national bill that would 'conflict' with the subnational law. Tobacco control advocates sought media attention as a strategy to protect the law. Santa Fe is the first subnational jurisdiction in Latin America to have enacted a comprehensive smoke-free policy following the recommendations of the World Health Organization (WHO) Framework Convention on Tobacco Control. After 3 years of implementation, pro-tobacco industry forces failed to undermine the law. Other subnational jurisdictions in Argentina, as well as in Mexico and Brazil are following the Santa Fe example.
-
Novel neural networks-based fault tolerant control scheme with fault alarm.
Shen, Qikun; Jiang, Bin; Shi, Peng; Lim, Cheng-Chew
2014-11-01
In this paper, the problem of adaptive active fault-tolerant control for a class of nonlinear systems with unknown actuator fault is investigated. The actuator fault is assumed to have no traditional affine appearance of the system state variables and control input. The useful property of the basis function of the radial basis function neural network (NN), which will be used in the design of the fault tolerant controller, is explored. Based on the analysis of the design of normal and passive fault tolerant controllers, by using the implicit function theorem, a novel NN-based active fault-tolerant control scheme with fault alarm is proposed. Comparing with results in the literature, the fault-tolerant control scheme can minimize the time delay between fault occurrence and accommodation that is called the time delay due to fault diagnosis, and reduce the adverse effect on system performance. In addition, the FTC scheme has the advantages of a passive fault-tolerant control scheme as well as the traditional active fault-tolerant control scheme's properties. Furthermore, the fault-tolerant control scheme requires no additional fault detection and isolation model which is necessary in the traditional active fault-tolerant control scheme. Finally, simulation results are presented to demonstrate the efficiency of the developed techniques.
-
Santa Elena. Ready to reshape its transport energy matrix
Energy Technology Data Exchange (ETDEWEB)
Moreano, Hernan [Universidad Estatal Peninsula de Santa Elena (Ecuador). Inst. de Investigacion Cientifica y Desarrollo Tecnologico (INCYT)
2012-07-01
The renewable energy issue opens the door to an ambient of opportunities. Santa Elena, one of the coastal provinces of Ecuador has the chance to go from a fossil fuel energy culture to a new energy scheme based on the use of environmental friendly fuels like natural gas and other renewable energy carriers like hydrogen. The marginal production of oil and natural gas from the Gustavo Galindo Velasco field and the updated gas reserves from the Gulf of Guayaquil make it possible. Infrastructure for natural gas production and distribution for vehicles is almost ready and any of the three refineries can generate hydrogen from natural gas. This provides the opportunity to reshape the Santa Elena transport energy matrix, where vehicles can burn natural gas and inter country buses can work with hydrogen. Traditional Fishing boats can be fitted with hydrogen storage and fuel systems later on. Santa Elena should face this challenge through a joint effort of public and private parties. Santa Elena State University and its partners as a focus point to create: The Campus of Energy Knowledge, where research, science and technology will serve companies that work in the energy business with a strong synergy, which will create jobs for the Santa Elena people. (orig.)
-
International Nuclear Information System (INIS)
Haasl, D.F.; Roberts, N.H.; Vesely, W.E.; Goldberg, F.F.
1981-01-01
This handbook describes a methodology for reliability analysis of complex systems such as those which comprise the engineered safety features of nuclear power generating stations. After an initial overview of the available system analysis approaches, the handbook focuses on a description of the deductive method known as fault tree analysis. The following aspects of fault tree analysis are covered: basic concepts for fault tree analysis; basic elements of a fault tree; fault tree construction; probability, statistics, and Boolean algebra for the fault tree analyst; qualitative and quantitative fault tree evaluation techniques; and computer codes for fault tree evaluation. Also discussed are several example problems illustrating the basic concepts of fault tree construction and evaluation
-
Energy Technology Data Exchange (ETDEWEB)
Boles, James R. [Univ. of California, Santa Barbara, CA (United States); Garven, Grant [Tufts Univ., Medford, MA (United States)
2015-08-04
Our studies have had an important impact on societal issues. Experimental and field observations show that CO2 degassing, such as might occur from stored CO2 reservoir gas, can result in significant stable isotopic disequilibrium. In the offshore South Ellwood field of the Santa Barbara channel, we show how oil production has reduced natural seep rates in the area, thereby reducing greenhouse gases. Permeability is calculated to be ~20-30 millidarcys for km-scale fault-focused fluid flow, using changes in natural gas seepage rates from well production, and poroelastic changes in formation pore-water pressure. In the Los Angeles (LA) basin, our characterization of formation water chemistry, including stable isotopic studies, allows the distinction between deep and shallow formations waters. Our multiphase computational-based modeling of petroleum migration demonstrates the important role of major faults on geological-scale fluid migration in the LA basin, and show how petroleum was dammed up against the Newport-Inglewood fault zone in a “geologically fast” interval of time (less than 0.5 million years). Furthermore, these fluid studies also will allow evaluation of potential cross-formational mixing of formation fluids. Lastly, our new study of helium isotopes in the LA basin shows a significant leakage of mantle helium along the Newport Inglewood fault zone (NIFZ), at flow rates up to 2 cm/yr. Crustal-scale fault permeability (~60 microdarcys) and advective versus conductive heat transport rates have been estimated using the observed helium isotopic data. The NIFZ is an important deep-seated fault that may crosscut a proposed basin decollement fault in this heavily populated area, and appears to allow seepage of helium from the mantle sources about 30 km beneath Los Angeles. The helium study has been widely cited in recent weeks by the news media, both in radio and on numerous web sites.
-
Energy Technology Data Exchange (ETDEWEB)
Garven, Grant [Tufts Univ., Medford, MA (United States)
2015-08-11
Our studies have had an important impact on societal issues. Experimental and field observations show that CO2 degassing, such as might occur from stored CO2 reservoir gas, can result in significant stable isotopic disequilibrium. In the offshore South Ellwood field of the Santa Barbara channel, we show how oil production has reduced natural seep rates in the area, thereby reducing greenhouse gases. Permeability is calculated to be ~20-30 millidarcys for km-scale fault-focused fluid flow, using changes in natural gas seepage rates from well production, and poroelastic changes in formation pore-water pressure. In the Los Angeles (LA) basin, our characterization of formation water chemistry, including stable isotopic studies, allows the distinction between deep and shallow formations waters. Our multiphase computational-based modeling of petroleum migration demonstrates the important role of major faults on geological-scale fluid migration in the LA basin, and show how petroleum was dammed up against the Newport-Inglewood fault zone in a “geologically fast” interval of time (less than 0.5 million years). Furthermore, these fluid studies also will allow evaluation of potential cross-formational mixing of formation fluids. Lastly, our new study of helium isotopes in the LA basin shows a significant leakage of mantle helium along the Newport Inglewood fault zone (NIFZ), at flow rates up to 2 cm/yr. Crustal-scale fault permeability (~60 microdarcys) and advective versus conductive heat transport rates have been estimated using the observed helium isotopic data. The NIFZ is an important deep-seated fault that may crosscut a proposed basin decollement fault in this heavily populated area, and appears to allow seepage of helium from the mantle sources about 30 km beneath Los Angeles. The helium study has been widely cited in recent weeks by the news media, both in radio and on numerous web sites.
-
Santa soja: narrativa documental em fotolivro
Seidl, Eduardo
2016-01-01
A partir do fotolivro Santa Soja como objeto e do resgate histórico das práticas jornalísticas de reportagem e de edição por meio de entrevistas com os cinco autores, esta pesquisa busca identificar o fotolivro como formato potencializador do fotodocumentarismo. Para tanto, foi proposta uma localização conceitual sobre o fotolivro, a linguagem e a narrativa fotográfica e sobre a vocação historiográfica e testemunhal da fotografia, a fim de contextualizar uma análise do fotolivro Santa Soja qu...
-
Santa Cruz thermic plant islanding with local loads
Energy Technology Data Exchange (ETDEWEB)
Nascimento, A R [Light Servicos de Eletricidade SA, Rio de Janeiro, RJ (Brazil); Gomes, Paulo; Almeida, Paulo C. de [ELETROBRAS, Rio de Janeiro, RJ (Brazil); Sereno, Marcos G [FURNAS, Rio de Janeiro, RJ (Brazil)
1988-12-31
This work looks into the feasibility of implementing a scheme for the islanding of the Santa Cruz Thermic Plant ( Rio de janeiro State) with LIGHT`s (Electric power public utility) loads fed by the Santa Cruz-Jacarepagua trunk connection, considering presently-existing system problems relative to a significant frequency drop when a loss occurs of a large generation block and which causes the blockade scheme of the mentioned Plant to work, thus aggravating the frequency control still further. An analysis is made of such scheme implementation implications on the scheme for islanding a Santa Cruz 84 MW machine to provide supply to the auxiliary services of The Angra dos Reis nuclear plant presently existing in the system. 2 refs., 9 figs.
-
Fault isolability conditions for linear systems with additive faults
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Stoustrup, Jakob
2006-01-01
In this paper, we shall show that an unlimited number of additive single faults can be isolated under mild conditions if a general isolation scheme is applied. Multiple faults are also covered. The approach is algebraic and is based on a set representation of faults, where all faults within a set...
-
Fault diagnosis and fault-tolerant control based on adaptive control approach
Shen, Qikun; Shi, Peng
2017-01-01
This book provides recent theoretical developments in and practical applications of fault diagnosis and fault tolerant control for complex dynamical systems, including uncertain systems, linear and nonlinear systems. Combining adaptive control technique with other control methodologies, it investigates the problems of fault diagnosis and fault tolerant control for uncertain dynamic systems with or without time delay. As such, the book provides readers a solid understanding of fault diagnosis and fault tolerant control based on adaptive control technology. Given its depth and breadth, it is well suited for undergraduate and graduate courses on linear system theory, nonlinear system theory, fault diagnosis and fault tolerant control techniques. Further, it can be used as a reference source for academic research on fault diagnosis and fault tolerant control, and for postgraduates in the field of control theory and engineering. .
-
Communicating Why: Aligning the Air Force Message
2015-02-17
Mart, Dell, Starbucks , and even Apple when Steve Jobs retired the first time).21 In other words, to discover and articulate the Air Force’s WHY... Corporation , 2012), iii. 18 Ibid., 9. 19 Squadron Officer School Think Tank Class 14E, “Changing the Air Force Narrative” (Maxwell AFB, AL: Squadron...Through: The Search for a Strong, Unified Culture for America’s Airmen.” Santa Monica, CA: RAND Corporation , 2012. United States Air Force. “United
-
Abe, S.
2010-12-01
In this study, we carried out two sets of active fault investigation by the request from Ministry of Education, Culture, Sports, Science and Technology in the sea area of the extension of Kikugawa fault and the Nishiyama fault. We want to clarify the five following matters about both active faults based on those results. (1)Fault continuity of the land and the sea. (2) The length of the active fault. (3) The division of the segment. (4) Activity characteristics. In this investigation, we carried out a digital single channel seismic reflection survey in the whole area of both active faults. In addition, a high-resolution multichannel seismic reflection survey was carried out to recognize the detailed structure of a shallow stratum. Furthermore, the sampling with the vibrocoring to get information of the sedimentation age was carried out. The reflection profile of both active faults was extremely clear. The characteristics of the lateral fault such as flower structure, the dispersion of the active fault were recognized. In addition, from analysis of the age of the stratum, it was recognized that the thickness of the sediment was extremely thin in Holocene epoch on the continental shelf in this sea area. It was confirmed that the Kikugawa fault extended to the offing than the existing results of research by a result of this investigation. In addition, the width of the active fault seems to become wide toward the offing while dispersing. At present, we think that we can divide Kikugawa fault into some segments based on the distribution form of the segment. About the Nishiyama fault, reflection profiles to show the existence of the active fault was acquired in the sea between Ooshima and Kyushu. From this result and topographical existing results of research in Ooshima, it is thought that Nishiyama fault and the Ooshima offing active fault are a series of structure. As for Ooshima offing active fault, the upheaval side changes, and a direction changes too. Therefore, we
-
Bunch, Richard H.
1986-01-01
A fault finder for locating faults along a high voltage electrical transmission line. Real time monitoring of background noise and improved filtering of input signals is used to identify the occurrence of a fault. A fault is detected at both a master and remote unit spaced along the line. A master clock synchronizes operation of a similar clock at the remote unit. Both units include modulator and demodulator circuits for transmission of clock signals and data. All data is received at the master unit for processing to determine an accurate fault distance calculation.
-
"Santa Maria" forever : Eesti ja Portugali kirjandussuhetest / Toomas Haug
Haug, Toomas, 1956-
2012-01-01
Jaanuaris 1961 Portugali diktaatorlikule režiimile protestiks kaaperdatud laevast "Santa Maria", mis sai omamoodi vabaduse ja vastuhaku sümboliks ka okupeeritud Eestis. Artiklis käsitletakse sellest sündmusest mõjutatud teoseid, täpsemalt Aleksander Suumanni maali "Santa Maria" ja Paul-Eerik Rummo samanimelist luuletust
-
"Santa Maria" forever : Eesti ja Portugali kirjandussuhetest / Toomas Haug
Haug, Toomas, 1956-
2015-01-01
Jaanuaris 1961 Portugali diktaatorlikule režiimile protestiks kaaperdatud laevast "Santa Maria", mis sai omamoodi vabaduse ja vastuhaku sümboliks ka okupeeritud Eestis. Artiklis käsitletakse sellest sündmusest mõjutatud teoseid, täpsemalt Aleksander Suumanni maali "Santa Maria" ja Paul-Eerik Rummo samanimelist luuletust
-
Directory of Open Access Journals (Sweden)
Antonio Guerreiro
2012-09-01
Full Text Available Few anthropologists have yet published their field dairies; until now Malinowski’s dairy is considered as one of the most fascinating piece of ethnographical writing. Monica Freeman’s dairies document the Freemans’ long Iban fieldwork in Sarawak (June 1949-May 1951, at the time a Crown colony (the State joined the Federation of Malaysia in 1963. This book is a welcome addition to both Anthropological litterature and Iban Studies. Derek Freeman (1916-2001, coming originally from New Zealan...
-
The Sorong Fault Zone, Indonesia: Mapping a Fault Zone Offshore
Melia, S.; Hall, R.
2017-12-01
The Sorong Fault Zone is a left-lateral strike-slip fault zone in eastern Indonesia, extending westwards from the Bird's Head peninsula of West Papua towards Sulawesi. It is the result of interactions between the Pacific, Caroline, Philippine Sea, and Australian Plates and much of it is offshore. Previous research on the fault zone has been limited by the low resolution of available data offshore, leading to debates over the extent, location, and timing of movements, and the tectonic evolution of eastern Indonesia. Different studies have shown it north of the Sula Islands, truncated south of Halmahera, continuing to Sulawesi, or splaying into a horsetail fan of smaller faults. Recently acquired high resolution multibeam bathymetry of the seafloor (with a resolution of 15-25 meters), and 2D seismic lines, provide the opportunity to trace the fault offshore. The position of different strands can be identified. On land, SRTM topography shows that in the northern Bird's Head the fault zone is characterised by closely spaced E-W trending faults. NW of the Bird's Head offshore there is a fold and thrust belt which terminates some strands. To the west of the Bird's Head offshore the fault zone diverges into multiple strands trending ENE-WSW. Regions of Riedel shearing are evident west of the Bird's Head, indicating sinistral strike-slip motion. Further west, the ENE-WSW trending faults turn to an E-W trend and there are at least three fault zones situated immediately south of Halmahera, north of the Sula Islands, and between the islands of Sanana and Mangole where the fault system terminates in horsetail strands. South of the Sula islands some former normal faults at the continent-ocean boundary with the North Banda Sea are being reactivated as strike-slip faults. The fault zone does not currently reach Sulawesi. The new fault map differs from previous interpretations concerning the location, age and significance of different parts of the Sorong Fault Zone. Kinematic
-
Wind turbine fault detection and fault tolerant control
DEFF Research Database (Denmark)
Odgaard, Peter Fogh; Johnson, Kathryn
2013-01-01
In this updated edition of a previous wind turbine fault detection and fault tolerant control challenge, we present a more sophisticated wind turbine model and updated fault scenarios to enhance the realism of the challenge and therefore the value of the solutions. This paper describes...
-
Puaux , Olivier
1986-01-01
Las Milpillas ( site n°95 ), Santa Gertrudis, Municipio de Zacapu, Michoacán. Opéración 1. Groupo B. Estructura B1. Unidad Excavación Noroeste. Pétroglifo dibajo de los escombros, Fachaba Escalinatas. Coordenadas : 19°51'48" 101°49'.
-
Energy Technology Data Exchange (ETDEWEB)
Cho, Jaehyun; Lee, Seung Jun, E-mail: sjlee420@unist.ac.kr; Jung, Wondea
2017-05-15
Highlights: • We developed the fault-weighted quantification method of fault detection coverage. • The method has been applied to specific digital reactor protection system. • The unavailability of the module had 20-times difference with the traditional method. • Several experimental tests will be effectively prioritized using this method. - Abstract: The one of the most outstanding features of a digital I&C system is the use of a fault-tolerant technique. With an awareness regarding the importance of thequantification of fault detection coverage of fault-tolerant techniques, several researches related to the fault injection method were developed and employed to quantify a fault detection coverage. In the fault injection method, each injected fault has a different importance because the frequency of realization of every injected fault is different. However, there have been no previous studies addressing the importance and weighting factor of each injected fault. In this work, a new method for allocating the weighting to each injected fault using the failure mode and effect analysis data was proposed. For application, the fault-weighted quantification method has also been applied to specific digital reactor protection system to quantify the fault detection coverage. One of the major findings in an application was that we may estimate the unavailability of the specific module in digital I&C systems about 20-times smaller than real value when we use a traditional method. The other finding was that we can also classify the importance of the experimental case. Therefore, this method is expected to not only suggest an accurate quantification procedure of fault-detection coverage by weighting the injected faults, but to also contribute to an effective fault injection experiment by sorting the importance of the failure categories.
-
Abbott, Kathy
1990-01-01
The objective of the research in this area of fault management is to develop and implement a decision aiding concept for diagnosing faults, especially faults which are difficult for pilots to identify, and to develop methods for presenting the diagnosis information to the flight crew in a timely and comprehensible manner. The requirements for the diagnosis concept were identified by interviewing pilots, analyzing actual incident and accident cases, and examining psychology literature on how humans perform diagnosis. The diagnosis decision aiding concept developed based on those requirements takes abnormal sensor readings as input, as identified by a fault monitor. Based on these abnormal sensor readings, the diagnosis concept identifies the cause or source of the fault and all components affected by the fault. This concept was implemented for diagnosis of aircraft propulsion and hydraulic subsystems in a computer program called Draphys (Diagnostic Reasoning About Physical Systems). Draphys is unique in two important ways. First, it uses models of both functional and physical relationships in the subsystems. Using both models enables the diagnostic reasoning to identify the fault propagation as the faulted system continues to operate, and to diagnose physical damage. Draphys also reasons about behavior of the faulted system over time, to eliminate possibilities as more information becomes available, and to update the system status as more components are affected by the fault. The crew interface research is examining display issues associated with presenting diagnosis information to the flight crew. One study examined issues for presenting system status information. One lesson learned from that study was that pilots found fault situations to be more complex if they involved multiple subsystems. Another was pilots could identify the faulted systems more quickly if the system status was presented in pictorial or text format. Another study is currently under way to
-
International Nuclear Information System (INIS)
Tarifa, Enrique E.; Scenna, Nicolas J.
1998-01-01
This work presents a new strategy for fault diagnosis in large chemical processes (E.E. Tarifa, Fault diagnosis in complex chemistries plants: plants of large dimensions and batch processes. Ph.D. thesis, Universidad Nacional del Litoral, Santa Fe, 1995). A special decomposition of the plant is made in sectors. Afterwards each sector is studied independently. These steps are carried out in the off-line mode. They produced vital information for the diagnosis system. This system works in the on-line mode and is based on a two-tier strategy. When a fault is produced, the upper level identifies the faulty sector. Then, the lower level carries out an in-depth study that focuses only on the critical sectors to identify the fault. The loss of information produced by the process partition may cause spurious diagnosis. This problem is overcome at the second level using qualitative simulation and fuzzy logic. In the second part of this work, the new methodology is tested to evaluate its performance in practical cases. A multiple stage flash desalination system (MSF) is chosen because it is a complex system, with many recycles and variables to be supervised. The steps for the knowledge base generation and all the blocks included in the diagnosis system are analyzed. Evaluation of the diagnosis performance is carried out using a rigorous dynamic simulator
-
Bense, V. F.; Gleeson, T.; Loveless, S. E.; Bour, O.; Scibek, J.
2013-12-01
Deformation along faults in the shallow crust (research effort of structural geologists and hydrogeologists. However, we find that these disciplines often use different methods with little interaction between them. In this review, we document the current multi-disciplinary understanding of fault zone hydrogeology. We discuss surface- and subsurface observations from diverse rock types from unlithified and lithified clastic sediments through to carbonate, crystalline, and volcanic rocks. For each rock type, we evaluate geological deformation mechanisms, hydrogeologic observations and conceptual models of fault zone hydrogeology. Outcrop observations indicate that fault zones commonly have a permeability structure suggesting they should act as complex conduit-barrier systems in which along-fault flow is encouraged and across-fault flow is impeded. Hydrogeological observations of fault zones reported in the literature show a broad qualitative agreement with outcrop-based conceptual models of fault zone hydrogeology. Nevertheless, the specific impact of a particular fault permeability structure on fault zone hydrogeology can only be assessed when the hydrogeological context of the fault zone is considered and not from outcrop observations alone. To gain a more integrated, comprehensive understanding of fault zone hydrogeology, we foresee numerous synergistic opportunities and challenges for the discipline of structural geology and hydrogeology to co-evolve and address remaining challenges by co-locating study areas, sharing approaches and fusing data, developing conceptual models from hydrogeologic data, numerical modeling, and training interdisciplinary scientists.
-
Pelas trilhas da ILha de Santa Catarina
Silveira, Flavio Leonel Abreu da
1996-01-01
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Filosofia e Ciencias Humanas O estudo sobre o ecoturismo na Ilha de Santa Catarina vem demonstrar o surgimento de novas modalidades turísticas entre os grupos urbanos. A pesquisa aponta para a intersecção entre lazer, turismo, ecologia e esporte, demonstrando a importân-cia das práticas ecoturísticas na atualidade. A partir de tal perspectiva, as questões de gênero surgem com significativa relevância. Estamos frente...
-
Imaging of Subsurface Faults using Refraction Migration with Fault Flooding
Metwally, Ahmed Mohsen Hassan
2017-05-31
We propose a novel method for imaging shallow faults by migration of transmitted refraction arrivals. The assumption is that there is a significant velocity contrast across the fault boundary that is underlain by a refracting interface. This procedure, denoted as refraction migration with fault flooding, largely overcomes the difficulty in imaging shallow faults with seismic surveys. Numerical results successfully validate this method on three synthetic examples and two field-data sets. The first field-data set is next to the Gulf of Aqaba and the second example is from a seismic profile recorded in Arizona. The faults detected by refraction migration in the Gulf of Aqaba data were in agreement with those indicated in a P-velocity tomogram. However, a new fault is detected at the end of the migration image that is not clearly seen in the traveltime tomogram. This result is similar to that for the Arizona data where the refraction image showed faults consistent with those seen in the P-velocity tomogram, except it also detected an antithetic fault at the end of the line. This fault cannot be clearly seen in the traveltime tomogram due to the limited ray coverage.
-
Imaging of Subsurface Faults using Refraction Migration with Fault Flooding
Metwally, Ahmed Mohsen Hassan; Hanafy, Sherif; Guo, Bowen; Kosmicki, Maximillian Sunflower
2017-01-01
We propose a novel method for imaging shallow faults by migration of transmitted refraction arrivals. The assumption is that there is a significant velocity contrast across the fault boundary that is underlain by a refracting interface. This procedure, denoted as refraction migration with fault flooding, largely overcomes the difficulty in imaging shallow faults with seismic surveys. Numerical results successfully validate this method on three synthetic examples and two field-data sets. The first field-data set is next to the Gulf of Aqaba and the second example is from a seismic profile recorded in Arizona. The faults detected by refraction migration in the Gulf of Aqaba data were in agreement with those indicated in a P-velocity tomogram. However, a new fault is detected at the end of the migration image that is not clearly seen in the traveltime tomogram. This result is similar to that for the Arizona data where the refraction image showed faults consistent with those seen in the P-velocity tomogram, except it also detected an antithetic fault at the end of the line. This fault cannot be clearly seen in the traveltime tomogram due to the limited ray coverage.
-
International Nuclear Information System (INIS)
Anon.
1982-01-01
The 1981 Linear Accelerator Conference, organized by Los Alamos National Laboratory, was held from 19-23 October in Santa Fe, New Mexico. The surroundings were superb and helped to ensure a successful meeting. There were more than two hundred and twenty participants, with good representation from Japan and Western Europe
-
Czech Academy of Sciences Publication Activity Database
Coubal, Miroslav; Adamovič, Jiří; Málek, Jiří; Prouza, V.
2014-01-01
Roč. 59, č. 3 (2014), s. 183-208 ISSN 1802-6222 Institutional support: RVO:67985831 ; RVO:67985891 Keywords : fault architecture * fault plane geometry * drag structures * thrust fault * sandstone * Lusatian Fault Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.405, year: 2014
-
Free inside: The Music Class at Santa Ana Jail
Fierro, Joe
2010-01-01
This article examines the workings of the music class at the Santa Ana Jail in Santa Ana, California. It gives us insight into a jail system and a music class focused on helping inmates position themselves to become productive members of society. In this article I examine how the facility encourages inmates' good behaviour and why the music class…
-
Fault-tolerant cooperative output regulation for multi-vehicle systems with sensor faults
Qin, Liguo; He, Xiao; Zhou, D. H.
2017-10-01
This paper presents a unified framework of fault diagnosis and fault-tolerant cooperative output regulation (FTCOR) for a linear discrete-time multi-vehicle system with sensor faults. The FTCOR control law is designed through three steps. A cooperative output regulation (COR) controller is designed based on the internal mode principle when there are no sensor faults. A sufficient condition on the existence of the COR controller is given based on the discrete-time algebraic Riccati equation (DARE). Then, a decentralised fault diagnosis scheme is designed to cope with sensor faults occurring in followers. A residual generator is developed to detect sensor faults of each follower, and a bank of fault-matching estimators are proposed to isolate and estimate sensor faults of each follower. Unlike the current distributed fault diagnosis for multi-vehicle systems, the presented decentralised fault diagnosis scheme in each vehicle reduces the communication and computation load by only using the information of the vehicle. By combing the sensor fault estimation and the COR control law, an FTCOR controller is proposed. Finally, the simulation results demonstrate the effectiveness of the FTCOR controller.
-
Directory of Open Access Journals (Sweden)
Xu Feng
2017-03-01
Full Text Available In this paper, a fault-tolerant control (FTC scheme is proposed for actuator faults, which is built upon tube-based model predictive control (MPC as well as set-based fault detection and isolation (FDI. In the class of MPC techniques, tubebased MPC can effectively deal with system constraints and uncertainties with relatively low computational complexity compared with other robust MPC techniques such as min-max MPC. Set-based FDI, generally considering the worst case of uncertainties, can robustly detect and isolate actuator faults. In the proposed FTC scheme, fault detection (FD is passive by using invariant sets, while fault isolation (FI is active by means of MPC and tubes. The active FI method proposed in this paper is implemented by making use of the constraint-handling ability of MPC to manipulate the bounds of inputs.
-
Determining on-fault magnitude distributions for a connected, multi-fault system
Geist, E. L.; Parsons, T.
2017-12-01
A new method is developed to determine on-fault magnitude distributions within a complex and connected multi-fault system. A binary integer programming (BIP) method is used to distribute earthquakes from a 10 kyr synthetic regional catalog, with a minimum magnitude threshold of 6.0 and Gutenberg-Richter (G-R) parameters (a- and b-values) estimated from historical data. Each earthquake in the synthetic catalog can occur on any fault and at any location. In the multi-fault system, earthquake ruptures are allowed to branch or jump from one fault to another. The objective is to minimize the slip-rate misfit relative to target slip rates for each of the faults in the system. Maximum and minimum slip-rate estimates around the target slip rate are used as explicit constraints. An implicit constraint is that an earthquake can only be located on a fault (or series of connected faults) if it is long enough to contain that earthquake. The method is demonstrated in the San Francisco Bay area, using UCERF3 faults and slip-rates. We also invoke the same assumptions regarding background seismicity, coupling, and fault connectivity as in UCERF3. Using the preferred regional G-R a-value, which may be suppressed by the 1906 earthquake, the BIP problem is deemed infeasible when faults are not connected. Using connected faults, however, a solution is found in which there is a surprising diversity of magnitude distributions among faults. In particular, the optimal magnitude distribution for earthquakes that participate along the Peninsula section of the San Andreas fault indicates a deficit of magnitudes in the M6.0- 7.0 range. For the Rodgers Creek-Hayward fault combination, there is a deficit in the M6.0- 6.6 range. Rather than solving this as an optimization problem, we can set the objective function to zero and solve this as a constraint problem. Among the solutions to the constraint problem is one that admits many more earthquakes in the deficit magnitude ranges for both faults
-
Marcos Rodrigues
2008-01-01
Lagoa Santa, a small town in southeastern Brazil where naturalist Peter Lund lived, is regarded nowadays as an important historical site for the biological sciences. From 1847 to 1855, J.T. Reinhardt, hosted by Lund, collected 343 bird species. This material is an outstanding reference for many modern ornithological studies. The present paper reports the occurrence of some rare and threatened birds for the region of Lagoa Santa between 1998 and 2005. In this account I list the Rusty-margined ...
-
2010-06-01
Use. (Santa Monica, Calif.: RAND, 1995) 7. 5 Sagan , Scott. "The Case for No First Use." Survival 51, no. 3 (2009): 163-182. 6 The Stanley Foundation...America’s Nuclear Posture. (Cambridge, MA: Union of Concerned Scientists Global Security Program, 2010) 1. 60 Sagan , Scott. "The Case for No First...Foreign Policy for the 1970s: Building for Peace. S.l.: s.n., 1971. Nonproliferation--60 Years Later. DVD. Directed by Carla Robbins. Washington D.C
-
1992-04-01
Corporation Santa Monica, CA Col Jack Thorpe, USAF Special Assistant for Simulation Defense Advanced Research Projects Agency, DIRO Arlington, VA GEN Max...4s. Ab, it says, what about A-4s? Point and click-- manufactured by K Mart corporation , last item delivered in 1972. What does it fly? It flies Mark A...armed forces of the United States, so we can get the sinergy out of training that simply is of an estimable value in combat. Thank you very much. RADM
-
The Cooperative Engagement Capability CEC Transforming Naval Anti-air Warfare
2007-01-01
E-2C Aircraft Acquisition Options,” MR-1517-NAVY (Santa Monica: RAND, 2002), 10. 33 Aegis is not an acronym. The ὰιγίς ( Greek ) or ægis (Latin) was...the shield of the mythological god Zeus (Jupiter) and thus represents a sure defense. 34 For an overview of USN surface (not air) AAW...real time, without significant delay. In World War II CICs, radar operators, plotters, CIC evaluators, and FDOs acted as “ animation artists
-
Fault-Tolerant Approach for Modular Multilevel Converters under Submodule Faults
DEFF Research Database (Denmark)
Deng, Fujin; Tian, Yanjun; Zhu, Rongwu
2016-01-01
The modular multilevel converter (MMC) is attractive for medium- or high-power applications because of the advantages of its high modularity, availability, and high power quality. The fault-tolerant operation is one of the important issues for the MMC. This paper proposed a fault-tolerant approach...... for the MMC under submodule (SM) faults. The characteristic of the MMC with arms containing different number of healthy SMs under faults is analyzed. Based on the characteristic, the proposed approach can effectively keep the MMC operation as normal under SM faults. It can effectively improve the MMC...
-
Minear, J. T.; Wright, S. A.
2015-12-01
In this study, we investigate the sediment dynamics of the low-flow channel of the Santa Ana River that is formed by wastewater discharges and contains some of the last remaining habitat of the Santa Ana Sucker (Catostomus santaanae). The Santa Ana River is a highly-modified river draining the San Bernardino Mountains and Inland Empire metropolitan area east of Los Angeles. Home to over 4 million people, the watershed provides habitat for the federally-threatened Santa Ana Sucker, which presently reside within the mainstem Santa Ana River in a reach supported by year-round constant discharges from water treatment plants. The nearly constant low-flow wastewater discharges and infrequent runoff events create a small, approximately 8 m wide, inset channel within the approximately 300 m wide mainstem channel that is typically dry except for large flood flows. The sediment dynamics within the inset channel are characterized by constantly evolving bed substrate and sediment transport rates, and occasional channel avulsions. The sediment dynamics have large influence on the Sucker, which rely on coarse-substrate (gravel and cobble) for their food production. In WY 2013 through the present, we investigated the sediment dynamics of the inset channel using repeat bathymetric and substrate surveys, bedload sampling, and discharge measurements. We found two distinct phases of the inset channel behavior: 1. 'Reset' flows, where sediment-laden mainstem discharges from upstream runoff events result in sand deposition in the inset channel or avulse the inset channel onto previously dry riverbed; and 2. 'Winnowing' flows, whereby the sand within the inset channel is removed by clear-water low flows from the wastewater treatment plant discharges. Thus, in contrast to many regulated rivers where high flows are required to flush fine sediments from the bed (for example, downstream from dams), in the Santa Ana River the low flows from wastewater treatment plants serve as the flushing
-
DEFF Research Database (Denmark)
Osler, Merete; Jorgensen, Torben; Gerdes, Lars Ulrik
2002-01-01
of the study area. At the same time type A behaviours increased in both men and women, while there were no changes in reported personal problems. The proportion of women living alone increased, while the proportion of emotionally distressed decreased. In men there were no changes in cohabitation status...... or emotional distress. The changes in the psychosocial factors were the same in different educational groups. CONCLUSION: The socioeconomic position of the population improved at the individual and the community level during the study period. This was concurrent with the declining incidence of myocardial......AIM: Myocardial infarction incidence declined by 3-5% per year from 1982-92 in the Danish study population of the WHO MONICA project. This study examined whether psychosocial coronary risk factors changed in the population during this period. METHODS: Cross-sectional data from 6,695 Danish men...
-
Rectifier Fault Diagnosis and Fault Tolerance of a Doubly Fed Brushless Starter Generator
Directory of Open Access Journals (Sweden)
Liwei Shi
2015-01-01
Full Text Available This paper presents a rectifier fault diagnosis method with wavelet packet analysis to improve the fault tolerant four-phase doubly fed brushless starter generator (DFBLSG system reliability. The system components and fault tolerant principle of the high reliable DFBLSG are given. And the common fault of the rectifier is analyzed. The process of wavelet packet transforms fault detection/identification algorithm is introduced in detail. The fault tolerant performance and output voltage experiments were done to gather the energy characteristics with a voltage sensor. The signal is analyzed with 5-layer wavelet packets, and the energy eigenvalue of each frequency band is obtained. Meanwhile, the energy-eigenvalue tolerance was introduced to improve the diagnostic accuracy. With the wavelet packet fault diagnosis, the fault tolerant four-phase DFBLSG can detect the usual open-circuit fault and operate in the fault tolerant mode if there is a fault. The results indicate that the fault analysis techniques in this paper are accurate and effective.
-
Santa Fe Accelerator Conference
International Nuclear Information System (INIS)
Anon.
1983-01-01
The 10th USA National Particle Accelerator Conference was hosted this year by the Los Alamos National Laboratory in Santa Fe from 21-23 March. It was a resounding success in emphasizing the ferment of activity in the accelerator field. About 900 people registered and about 500 papers were presented in invited and contributed talks and poster sessions
-
高田, 圭太; 中田, 高; 後藤, 秀昭; 岡田, 篤正; 原口, 強; 松木, 宏彰
1998-01-01
The Naruto-South fault is situated of about 1000m south of the Naruto fault, the Median Tectonic Line active fault system in the eastern part of Shikoku. We investigated fault topography and subsurface geology of this fault by interpretation of large scale aerial photographs, collecting borehole data and Geo-Slicer survey. The results obtained are as follows; 1) The Naruto-South fault runs on the Yoshino River deltaic plain at least 2.5 km long with fault scarplet. the Naruto-South fault is o...
-
Robust Fault Diagnosis Design for Linear Multiagent Systems with Incipient Faults
Directory of Open Access Journals (Sweden)
Jingping Xia
2015-01-01
Full Text Available The design of a robust fault estimation observer is studied for linear multiagent systems subject to incipient faults. By considering the fact that incipient faults are in low-frequency domain, the fault estimation of such faults is proposed for discrete-time multiagent systems based on finite-frequency technique. Moreover, using the decomposition design, an equivalent conclusion is given. Simulation results of a numerical example are presented to demonstrate the effectiveness of the proposed techniques.
-
Stafford fault system: 120 million year fault movement history of northern Virginia
Powars, David S.; Catchings, Rufus D.; Horton, J. Wright; Schindler, J. Stephen; Pavich, Milan J.
2015-01-01
The Stafford fault system, located in the mid-Atlantic coastal plain of the eastern United States, provides the most complete record of fault movement during the past ~120 m.y. across the Virginia, Washington, District of Columbia (D.C.), and Maryland region, including displacement of Pleistocene terrace gravels. The Stafford fault system is close to and aligned with the Piedmont Spotsylvania and Long Branch fault zones. The dominant southwest-northeast trend of strong shaking from the 23 August 2011, moment magnitude Mw 5.8 Mineral, Virginia, earthquake is consistent with the connectivity of these faults, as seismic energy appears to have traveled along the documented and proposed extensions of the Stafford fault system into the Washington, D.C., area. Some other faults documented in the nearby coastal plain are clearly rooted in crystalline basement faults, especially along terrane boundaries. These coastal plain faults are commonly assumed to have undergone relatively uniform movement through time, with average slip rates from 0.3 to 1.5 m/m.y. However, there were higher rates during the Paleocene–early Eocene and the Pliocene (4.4–27.4 m/m.y), suggesting that slip occurred primarily during large earthquakes. Further investigation of the Stafford fault system is needed to understand potential earthquake hazards for the Virginia, Maryland, and Washington, D.C., area. The combined Stafford fault system and aligned Piedmont faults are ~180 km long, so if the combined fault system ruptured in a single event, it would result in a significantly larger magnitude earthquake than the Mineral earthquake. Many structures most strongly affected during the Mineral earthquake are along or near the Stafford fault system and its proposed northeastward extension.
-
Streamflow in the upper Santa Cruz River basin, Santa Cruz and Pima Counties, Arizona
Condes de la Torre, Alberto
1970-01-01
Streamflow records obtained in the upper Santa Cruz River basin of southern Arizona, United States, and northern Sonora, Mexico, have been analyzed to aid in the appraisal of the surface-water resources of the area. Records are available for 15 sites, and the length of record ranges from 60 years for the gaging station on the Santa .Cruz River at Tucson to 6 years for Pantano Wash near Vail. The analysis provides information on flow duration, low-flow frequency magnitude, flood-volume frequency and magnitude, and storage requirements to maintain selected draft rates. Flood-peak information collected from the gaging stations has been projected on a regional basis from which estimates of flood magnitude and frequency may be made for any site in the basin. Most streams in the 3,503-square-mile basin are ephemeral. Ground water sustains low flows only at Santa Cruz River near Nogales, Sonoita Creek near Patagonia, and Pantano Wash near Vail. Elsewhere, flow occurs only in direct response to precipitation. The median number of days per year in which there is no flow ranges from 4 at Sonoita Creek near Patagonia to 335 at Rillito Creek near Tomson. The streamflow is extremely variable from year to year, and annual flows have a coefficient of variation close to or exceeding unity at most stations. Although the amount of flow in the basin is small most of the time, the area is subject to floods. Most floods result from high-intensity precipitation caused by thunderstorms during the period ,July to September. Occasionally, when snowfall at the lower altitudes is followed by rain, winter floods produce large volumes of flow.
-
Optimal fault signal estimation
Stoorvogel, Antonie Arij; Niemann, H.H.; Saberi, A.; Sannuti, P.
2002-01-01
We consider here both fault identification and fault signal estimation. Regarding fault identification, we seek either exact or almost fault identification. On the other hand, regarding fault signal estimation, we seek either $H_2$ optimal, $H_2$ suboptimal or Hinfinity suboptimal estimation. By
-
Keener, Charles; Serpa, Laura; Pavlis, Terry L.
1993-04-01
New geophysical and fault kinematic studies indicate that late Cenozoic basin development in the Mormon Point area of Death Valley, California, was accommodated by fault rotations. Three of six fault segments recognized at Mormon Point are now inactive and have been rotated to low dips during extension. The remaining three segments are now active and moderately to steeply dipping. From the geophysical data, one active segment appears to offset the low-angle faults in the subsurface of Death Valley.
-
Real-time fault diagnosis and fault-tolerant control
Gao, Zhiwei; Ding, Steven X.; Cecati, Carlo
2015-01-01
This "Special Section on Real-Time Fault Diagnosis and Fault-Tolerant Control" of the IEEE Transactions on Industrial Electronics is motivated to provide a forum for academic and industrial communities to report recent theoretic/application results in real-time monitoring, diagnosis, and fault-tolerant design, and exchange the ideas about the emerging research direction in this field. Twenty-three papers were eventually selected through a strict peer-reviewed procedure, which represent the mo...
-
Fault kinematics and localised inversion within the Troms-Finnmark Fault Complex, SW Barents Sea
Zervas, I.; Omosanya, K. O.; Lippard, S. J.; Johansen, S. E.
2018-04-01
The areas bounding the Troms-Finnmark Fault Complex are affected by complex tectonic evolution. In this work, the history of fault growth, reactivation, and inversion of major faults in the Troms-Finnmark Fault Complex and the Ringvassøy Loppa Fault Complex is interpreted from three-dimensional seismic data, structural maps and fault displacement plots. Our results reveal eight normal faults bounding rotated fault blocks in the Troms-Finnmark Fault Complex. Both the throw-depth and displacement-distance plots show that the faults exhibit complex configurations of lateral and vertical segmentation with varied profiles. Some of the faults were reactivated by dip-linkages during the Late Jurassic and exhibit polycyclic fault growth, including radial, syn-sedimentary, and hybrid propagation. Localised positive inversion is the main mechanism of fault reactivation occurring at the Troms-Finnmark Fault Complex. The observed structural styles include folds associated with extensional faults, folded growth wedges and inverted depocentres. Localised inversion was intermittent with rifting during the Middle Jurassic-Early Cretaceous at the boundaries of the Troms-Finnmark Fault Complex to the Finnmark Platform. Additionally, tectonic inversion was more intense at the boundaries of the two fault complexes, affecting Middle Triassic to Early Cretaceous strata. Our study shows that localised folding is either a product of compressional forces or of lateral movements in the Troms-Finnmark Fault Complex. Regional stresses due to the uplift in the Loppa High and halokinesis in the Tromsø Basin are likely additional causes of inversion in the Troms-Finnmark Fault Complex.
-
78 FR 47007 - National Environmental Policy Act; Santa Susana Field Laboratory
2013-08-02
... project Web site address listed below. http://www.nasa.gov/agency/nepa/news/SSFL.html . ADDRESSES...; Santa Susana Field Laboratory AGENCY: National Aeronautics and Space Administration (NASA). ACTION... Environmental Cleanup Activities for the NASA-administered portion of the Santa Susana Field Laboratory (SSFL...
-
Niemi, T. M.; Busby, C.; Murowchick, J. B.; Martinez Gutierrez, G.; Antinao Rojas, J. L.; Graettinger, A.; Dorsey, R. J.
2017-12-01
Studies conducted during the three years of the Baja Basins REU program made progress toward solving a number of geologic questions in the Santa Rosalía Basin (SRB) of central Baja California. Geochemistry and 40Ar/39Ar geochronology on volcanic rocks within the SRB record the transition from subduction (13.32-9.95 Ma) to rifting (younger than 9.42 Ma) prior to deposition of the upper Miocene Boleo Formation. In contrast, magnesian andesite lavas and intrusions on the south margin of the SRB are dated at 6.1 +/- 0.3 Ma, and may have provided the heat engine for Boleo basin mineralization, which occurs in stratabound layers called "mantos". Mineralizing fluids in the Boleo Fm had near-neutral pH, evolved from a low Eh to more oxidizing conditions, were relatively low-temperature (near ambient T during manto ore deposition), and likely derived the Cu, Zn, Co, and Mn by leaching of mafic minerals in the volcanic rocks underlying the basin. Deposition of the ores was driven by oxidation as warm spring fluids vented to subaerial or near-shore marine environments, producing blankets of precipitated oxides interlayered with detrital fine to very coarse clastic beds. Integration of geologic map and fault data with detailed sedimentology and stratigraphic analysis provides evidence for syn-basinal tilting in two orthogonal directions during deposition of the Boleo Formation and Plio-Quaternary Tirabuzón, Infierno, and Santa Rosalia formations. Pronounced tilting toward the SE is revealed by southeastward thickening and coarsening of deposits in the Boleo Formation, and was synchronous with northeastward tilting and thickening due to slip on a network of NW-striking oblique normal faults. We hypothesize that the basin formed, subsided, and deformed as a pull-apart basin in a releasing step-over between two propagating transform faults that opened the late Miocene Gulf of California. The neotectonic evolution and uplift history of the SRB is documented through mapping of
-
Developing and Validating a Santa Ana Wildfire Threat Index
Capps, S. B.; Rolinski, T.; DAgostino, B.; Vanderburg, S.; Fovell, R. G.; Cao, Y.
2014-12-01
Santa Ana winds, common to southern California during the fall through spring, are a type of katabatic wind that originates from a direction generally ranging from 360°/0° to 100° and is usually accompanied by very low humidity. Since fuel conditions tend to be driest from late September through the middle of November, Santa Ana winds occurring during this period have the greatest potential to produce large, devastating fires when an ignition occurs. Such catastrophic fires occurred in 1993, 2003, 2007, and 2008. Because of the destructive nature of these fires, there has been a growing desire to categorize Santa Ana wind events in much the same way that tropical cyclones have been categorized. The Santa Ana Wildfire Threat index (SAWT) is an attempt to categorize such events with respect to fire activity, based on surface wind velocity, dew point depression, and forecasted fuel conditions. The index, a USDA Forest Service product, was developed by the Forest Service in collaboration with San Diego Gas and Electric Utility (SDG&E), the Department of Atmospheric and Oceanic Sciences at UCLA, The Desert Research Institute (DRI), and Vertum Partners. The methodology behind the SAWT index, along with the index itself will be presented in detail. Also, there will be a discussion on the construction of a 30-year climatology of the index, which includes various meteorological and fuel parameters. We will demonstrate the usefulness of the index as another decision support tool for fire agencies and first responders, and how it could assist the general public and private industry in the preparation of critical Santa Ana wind events.
-
75 FR 81846 - Expansion of the Santa Maria Valley Viticultural Area
2010-12-29
... decision. SUMMARY: This Treasury decision expands the Santa Maria Valley viticultural area in Santa Barbara... may purchase. DATES: Effective Date: January 28, 2011. FOR FURTHER INFORMATION CONTACT: Elisabeth C... origin of their wines to consumers and helps consumers to identify wines they may purchase. Establishment...
-
78 FR 55763 - National Environmental Policy Act; Santa Susana Field Laboratory
2013-09-11
... document format at http://www.nasa.gov/agency/nepa/news/SSFL.html . The Federal Register Notice of Intent...; Santa Susana Field Laboratory AGENCY: National Aeronautics and Space Administration (NASA). ACTION... Demolition and Environmental Cleanup Activities for the NASA-administered portion of the Santa Susana Field...
-
Structural features of the San Andreas fault at Tejon Pass, California
Dewers, T. A.; Reches, Z.; Brune, J. N.
2002-12-01
We mapped a 2 km belt along the San Andreas fault (SAF) in the Tejon Pass area where road cuts provide fresh exposures of the fault zone and surrounding rocks. Our 1:2,000 structural mapping is focused on analysis of faulting processes and is complementary to regional mapping at 1:12,000 scale by Ramirez (M.Sc., UC Santa Barbara, 1984). The dominant rock units are the Hungry Valley Formation of Pliocene age (clastic sediments) exposed south of the SAF, and the Tejon Lookout granite (Cretaceous) and Neenach Volcanic Formation exposed north of it. Ramirez (1983) deduced ~220 km of post-Miocene lateral slip. The local trend of the SAF is about N60W and it includes at least three main, subparallel segments that form a 200 m wide zone. The traces of the segments are quasi-linear, discontinuous, and they are stepped with respect to each other, forming at least five small pull-aparts and sag ponds in the mapping area. The three segments were not active semi-contemporaneously and the southern segment is apparently the oldest. The largest pull-apart, 60-70 m wide, displays young (Quaternary?) silt and shale layers. We found two rock bodies that are suspected as fault-rocks. One is a 1-2 m thick sheet-like body that separates the Tejon Lookout granite from young (Recent?) clastic rocks. In the field, it appears as a gouge zone composed of poorly cemented, dark clay size grains; however, the microstructure of this rock does not reveal clear shear features. The second body is the 80-120 m wide zone of Tejon Lookout granite that extends for less than 1 km along the SAF in the mapped area. It is characterized by three structural features: (1) pulverization into friable, granular material by multitude of grain-crossing fractures; (2) abundance of dip-slip small faults that are gently dipping toward and away from the SAF; and (3) striking lack of evidence for shear parallel to the SAF. The relationships between these features and the large right-lateral shear along the SAF are
-
Geomorphic evidence for enhanced Pliocene-Quaternary faulting in the northwestern Basin and Range
Ellis, Magdalena A; Barnes Jason B,; Colgan, Joseph P.
2014-01-01
Mountains in the U.S. Basin and Range Province are similar in form, yet they have different histories of deformation and uplift. Unfortunately, chronicling fault slip with techniques like thermochronology and geodetics can still leave sizable, yet potentially important gaps at Pliocene–Quaternary (∼105–106 yr) time scales. Here, we combine existing geochronology with new geomorphic observations and approaches to investigate the Miocene to Quaternary slip history of active normal faults that are exhuming three footwall ranges in northwestern Nevada: the Pine Forest Range, the Jackson Mountains, and the Santa Rosa Range. We use the National Elevation Dataset (10 m) digital elevation model (DEM) to measure bedrock river profiles and hillslope gradients from these ranges. We observe a prominent suite of channel convexities (knickpoints) that segment the channels into upper reaches with low steepness (mean ksn = ∼182; θref = 0.51) and lower, fault-proximal reaches with high steepness (mean ksn = ∼361), with a concomitant increase in hillslope angles of ∼6°–9°. Geologic maps and field-based proxies for rock strength allow us to rule out static causes for the knickpoints and interpret them as transient features triggered by a drop in base level that created ∼20% of the existing relief (∼220 m of ∼1050 m total). We then constrain the timing of base-level change using paleochannel profile reconstructions, catchment-scale volumetric erosion fluxes, and a stream-power–based knickpoint celerity (migration) model. Low-temperature thermochronology data show that faulting began at ca. 11–12 Ma, yet our results estimate knickpoint initiation began in the last 5 Ma and possibly as recently as 0.1 Ma with reasonable migration rates of 0.5–2 mm/yr. We interpret the collective results to be evidence for enhanced Pliocene–Quaternary fault slip that may be related to tectonic reorganization in the American West, although we cannot rule out climate as a
-
Central hydroelectric of Santa Ana
International Nuclear Information System (INIS)
Pardo A, German
2000-01-01
The paper is related to the construction of an alternating tunnel of conduction to take advantage of the available hydraulic load among the Wiesner Plant and Santa Ana's tanks and of Suba, works required to build a hydroelectric power station with a generation capacity of approximately of 12 MW
-
International Nuclear Information System (INIS)
Bentz, E. J. Jr.; Bentz, C. B.; O'Hora, T. D.; Baepler, D.
2003-01-01
The Santa Fe Bypass for transport of transuranic waste (TRU) to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico has been constructed and is operational (as of 2000). This paper presents a review of actual empirical data from the sales of real estate in the Santa Fe City/County area since the filing of the City of Santa Fe v. Komis lawsuit in 1988. The data analyzed covers the time period from 1989 through the last quarter of 2001
-
Energy Technology Data Exchange (ETDEWEB)
Gabbar, Hossam A. [Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology (UOIT), Ontario, L1H 7K4 (Canada)], E-mail: hossam.gabbar@uoit.ca; Sayed, Hanaa E.; Osunleke, Ajiboye S. [Okayama University, Graduate School of Natural Science and Technology, Division of Industrial Innovation Sciences Department of Intelligent Systems Engineering, Okayama 700-8530 (Japan); Masanobu, Hara [AspenTech Japan Co., Ltd., Kojimachi Crystal City 10F, Kojimachi, Chiyoda-ku, Tokyo 102-0083 (Japan)
2009-08-15
Fault simulator is proposed to understand and evaluate all possible fault propagation scenarios, which is an essential part of safety design and operation design and support of chemical/production processes. Process models are constructed and integrated with fault models, which are formulated in qualitative manner using fault semantic networks (FSN). Trend analysis techniques are used to map real time and simulation quantitative data into qualitative fault models for better decision support and tuning of FSN. The design of the proposed fault simulator is described and applied on experimental plant (G-Plant) to diagnose several fault scenarios. The proposed fault simulator will enable industrial plants to specify and validate safety requirements as part of safety system design as well as to support recovery and shutdown operation and disaster management.
-
Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig
2017-01-01
This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.
-
Santa Monica, California 1/3 Arc-second MHW Coastal Digital Elevation Model
National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...
-
H10997: NOS Hydrographic Survey , Santa Monica Bay, California, 2000-12-04
National Oceanic and Atmospheric Administration, Department of Commerce — The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe...
-
International Nuclear Information System (INIS)
Ueta, Keichi; Inoue, Daiei; Miyakoshi, Katsuyoshi; Miyagawa, Kimio; Miura, Daisuke
2003-01-01
Sandbox experiments and field surveys were performed to investigate fault system evolution and fault-related deformation of ground surface, the Quaternary deposits and rocks. The summary of the results is shown below. 1) In the case of strike-slip faulting, the basic fault sequence runs from early en echelon faults and pressure ridges through linear trough. The fault systems associated with the 2000 western Tottori earthquake are shown as en echelon pattern that characterize the early stage of wrench tectonics, therefore no thoroughgoing surface faulting was found above the rupture as defined by the main shock and aftershocks. 2) Low-angle and high-angle reverse faults commonly migrate basinward with time, respectively. With increasing normal fault displacement in bedrock, normal fault develops within range after reverse fault has formed along range front. 3) Horizontal distance of surface rupture from the bedrock fault normalized by the height of the Quaternary deposits agrees well with those of model tests. 4) Upward-widening damage zone, where secondary fractures develop, forms in the handing wall side of high-angle reverse fault at the Kamioka mine. (author)
-
Eigenvector of gravity gradient tensor for estimating fault dips considering fault type
Kusumoto, Shigekazu
2017-12-01
The dips of boundaries in faults and caldera walls play an important role in understanding their formation mechanisms. The fault dip is a particularly important parameter in numerical simulations for hazard map creation as the fault dip affects estimations of the area of disaster occurrence. In this study, I introduce a technique for estimating the fault dip using the eigenvector of the observed or calculated gravity gradient tensor on a profile and investigating its properties through numerical simulations. From numerical simulations, it was found that the maximum eigenvector of the tensor points to the high-density causative body, and the dip of the maximum eigenvector closely follows the dip of the normal fault. It was also found that the minimum eigenvector of the tensor points to the low-density causative body and that the dip of the minimum eigenvector closely follows the dip of the reverse fault. It was shown that the eigenvector of the gravity gradient tensor for estimating fault dips is determined by fault type. As an application of this technique, I estimated the dip of the Kurehayama Fault located in Toyama, Japan, and obtained a result that corresponded to conventional fault dip estimations by geology and geomorphology. Because the gravity gradient tensor is required for this analysis, I present a technique that estimates the gravity gradient tensor from the gravity anomaly on a profile.
-
Reverse fault growth and fault interaction with frictional interfaces: insights from analogue models
Bonanno, Emanuele; Bonini, Lorenzo; Basili, Roberto; Toscani, Giovanni; Seno, Silvio
2017-04-01
The association of faulting and folding is a common feature in mountain chains, fold-and-thrust belts, and accretionary wedges. Kinematic models are developed and widely used to explain a range of relationships between faulting and folding. However, these models may result not to be completely appropriate to explain shortening in mechanically heterogeneous rock bodies. Weak layers, bedding surfaces, or pre-existing faults placed ahead of a propagating fault tip may influence the fault propagation rate itself and the associated fold shape. In this work, we employed clay analogue models to investigate how mechanical discontinuities affect the propagation rate and the associated fold shape during the growth of reverse master faults. The simulated master faults dip at 30° and 45°, recalling the range of the most frequent dip angles for active reverse faults that occurs in nature. The mechanical discontinuities are simulated by pre-cutting the clay pack. For both experimental setups (30° and 45° dipping faults) we analyzed three different configurations: 1) isotropic, i.e. without precuts; 2) with one precut in the middle of the clay pack; and 3) with two evenly-spaced precuts. To test the repeatability of the processes and to have a statistically valid dataset we replicate each configuration three times. The experiments were monitored by collecting successive snapshots with a high-resolution camera pointing at the side of the model. The pictures were then processed using the Digital Image Correlation method (D.I.C.), in order to extract the displacement and shear-rate fields. These two quantities effectively show both the on-fault and off-fault deformation, indicating the activity along the newly-formed faults and whether and at what stage the discontinuities (precuts) are reactivated. To study the fault propagation and fold shape variability we marked the position of the fault tips and the fold profiles for every successive step of deformation. Then we compared
-
Fault Current Characteristics of the DFIG under Asymmetrical Fault Conditions
Directory of Open Access Journals (Sweden)
Fan Xiao
2015-09-01
Full Text Available During non-severe fault conditions, crowbar protection is not activated and the rotor windings of a doubly-fed induction generator (DFIG are excited by the AC/DC/AC converter. Meanwhile, under asymmetrical fault conditions, the electrical variables oscillate at twice the grid frequency in synchronous dq frame. In the engineering practice, notch filters are usually used to extract the positive and negative sequence components. In these cases, the dynamic response of a rotor-side converter (RSC and the notch filters have a large influence on the fault current characteristics of the DFIG. In this paper, the influence of the notch filters on the proportional integral (PI parameters is discussed and the simplified calculation models of the rotor current are established. Then, the dynamic performance of the stator flux linkage under asymmetrical fault conditions is also analyzed. Based on this, the fault characteristics of the stator current under asymmetrical fault conditions are studied and the corresponding analytical expressions of the stator fault current are obtained. Finally, digital simulation results validate the analytical results. The research results are helpful to meet the requirements of a practical short-circuit calculation and the construction of a relaying protection system for the power grid with penetration of DFIGs.
-
Scissoring Fault Rupture Properties along the Median Tectonic Line Fault Zone, Southwest Japan
Ikeda, M.; Nishizaka, N.; Onishi, K.; Sakamoto, J.; Takahashi, K.
2017-12-01
The Median Tectonic Line fault zone (hereinafter MTLFZ) is the longest and most active fault zone in Japan. The MTLFZ is a 400-km-long trench parallel right-lateral strike-slip fault accommodating lateral slip components of the Philippine Sea plate oblique subduction beneath the Eurasian plate [Fitch, 1972; Yeats, 1996]. Complex fault geometry evolves along the MTLFZ. The geomorphic and geological characteristics show a remarkable change through the MTLFZ. Extensional step-overs and pull-apart basins and a pop-up structure develop in western and eastern parts of the MTLFZ, respectively. It is like a "scissoring fault properties". We can point out two main factors to form scissoring fault properties along the MTLFZ. One is a regional stress condition, and another is a preexisting fault. The direction of σ1 anticlockwise rotate from N170°E [Famin et al., 2014] in the eastern Shikoku to Kinki areas and N100°E [Research Group for Crustral Stress in Western Japan, 1980] in central Shikoku to N85°E [Onishi et al., 2016] in western Shikoku. According to the rotation of principal stress directions, the western and eastern parts of the MTLFZ are to be a transtension and compression regime, respectively. The MTLFZ formed as a terrain boundary at Cretaceous, and has evolved with a long active history. The fault style has changed variously, such as left-lateral, thrust, normal and right-lateral. Under the structural condition of a preexisting fault being, the rupture does not completely conform to Anderson's theory for a newly formed fault, as the theory would require either purely dip-slip motion on the 45° dipping fault or strike-slip motion on a vertical fault. The fault rupture of the 2013 Barochistan earthquake in Pakistan is a rare example of large strike-slip reactivation on a relatively low angle dipping fault (thrust fault), though many strike-slip faults have vertical plane generally [Avouac et al., 2014]. In this presentation, we, firstly, show deep subsurface
-
Directory of Open Access Journals (Sweden)
Berta Pinto de Estrada
1975-06-01
Full Text Available Ex hacienda Santa Cruz was chosen to show the differences in the geographic and economic structure, and the historic causes that originated them, as an example of ihe situation in the northem part of Campeche.
-
Oral health of the Paleoamericans of Lagoa Santa, Central Brazil.
Da-Gloria, Pedro; Larsen, Clark Spencer
2014-05-01
The peopling, origins, and early prehistory of the Americas are topics of intense debate. However, few studies have used human remains to document and interpret patterns of health and lifestyle of Paleoamericans. This study provides the first investigation to characterize oral health in a series of early Holocene skeletal remains from Lagoa Santa, Brazil, a locality containing the remains of some of the earliest inhabitants of South America (10,000-7,000 BP). The sample is composed of 949 teeth and 1925 alveoli from an estimated 113 individuals excavated from 17 archaeological sites located in the State of Minas Gerais. We compare dental caries and abscess prevalence at Lagoa Santa to a large sample of human skeletons from the Western Hemisphere Project (WHP) database using both individual and tooth/alveolus count methods. In addition, antemortem tooth loss and tooth wear were analyzed in Lagoa Santa by sex and age. The results show that Lagoa Santa dental caries and abscess prevalence are significantly higher than observed among other hunter-gatherers included in the WHP database, except when abscess prevalence is considered by individual count. Adult females have less tooth wear coupled with higher prevalence of dental caries and antemortem tooth loss than adult males. These results point to an unexpected record of poor oral health at Lagoa Santa, especially among females. A diet based on a highly cariogenic combination of wild tubers and fruits is suggested as an explanation for the elevated rate, characterizing an early adaptation to a tropical environment in South America. Copyright © 2014 Wiley Periodicals, Inc.
-
Directory of Open Access Journals (Sweden)
Daqi Zhu
2008-11-01
Full Text Available This paper introduces a novel thruster fault diagnosis and accommodation system for open-frame underwater vehicles with abrupt faults. The proposed system consists of two subsystems: a fault diagnosis subsystem and a fault accommodation sub-system. In the fault diagnosis subsystem a ICMAC(Improved Credit Assignment Cerebellar Model Articulation Controllers neural network is used to realize the on-line fault identification and the weighting matrix computation. The fault accommodation subsystem uses a control algorithm based on weighted pseudo-inverse to find the solution of the control allocation problem. To illustrate the proposed method effective, simulation example, under multi-uncertain abrupt faults, is given in the paper.
-
Information Based Fault Diagnosis
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Poulsen, Niels Kjølstad
2008-01-01
Fault detection and isolation, (FDI) of parametric faults in dynamic systems will be considered in this paper. An active fault diagnosis (AFD) approach is applied. The fault diagnosis will be investigated with respect to different information levels from the external inputs to the systems. These ...
-
Fault Tolerant Feedback Control
DEFF Research Database (Denmark)
Stoustrup, Jakob; Niemann, H.
2001-01-01
An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....
-
Data-driven design of fault diagnosis and fault-tolerant control systems
Ding, Steven X
2014-01-01
Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods, and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and...
-
Chen, Gang; Song, Yongduan; Lewis, Frank L
2016-05-03
This paper investigates the distributed fault-tolerant control problem of networked Euler-Lagrange systems with actuator and communication link faults. An adaptive fault-tolerant cooperative control scheme is proposed to achieve the coordinated tracking control of networked uncertain Lagrange systems on a general directed communication topology, which contains a spanning tree with the root node being the active target system. The proposed algorithm is capable of compensating for the actuator bias fault, the partial loss of effectiveness actuation fault, the communication link fault, the model uncertainty, and the external disturbance simultaneously. The control scheme does not use any fault detection and isolation mechanism to detect, separate, and identify the actuator faults online, which largely reduces the online computation and expedites the responsiveness of the controller. To validate the effectiveness of the proposed method, a test-bed of multiple robot-arm cooperative control system is developed for real-time verification. Experiments on the networked robot-arms are conduced and the results confirm the benefits and the effectiveness of the proposed distributed fault-tolerant control algorithms.
-
2011-08-01
Experience in Africa (Santa Monica, CA: RAND, 1989), 2. 3. André Martel, “Conduire la défense: les institutions, les forces, les al- liances,” in Histoire ...365; and Claude Carlier, “L’aéronautique et l’espace, 1945–1993,” chap. 10, in Martel, Histoire militaire de la France, Tome 4, 456–59, 462. 5...annexed report], 21. 37. André Martel, “Conclusion: Armées 2000; un système de transition,” in Martel, Histoire militaire de la France, 597–98. 38. Gregory
-
Food Environment, Diet, and Obesity Among LA County Adults
Centers for Disease Control (CDC) Podcasts
2015-08-31
This podcast features Nelly Mejia, winner of the journalâs 2015 Student Research Paper Contest and PhD Candidate at the Pardee RAND Graduate School in Santa Monica, California. Nelly discusses her winning paper, which examined the relationship between neighborhood food outlet locations and the diet and body mass index of adults living in Los Angeles County, California. Created: 8/31/2015 by Preventing Chronic Disease (PCD), National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP). Date Released: 8/31/2015.
-
Directory of Open Access Journals (Sweden)
Qian Liu
2010-02-01
Full Text Available A novel thruster fault diagnosis and accommodation method for open-frame underwater vehicles is presented in the paper. The proposed system consists of two units: a fault diagnosis unit and a fault accommodation unit. In the fault diagnosis unit an ICMAC (Improved Credit Assignment Cerebellar Model Articulation Controllers neural network information fusion model is used to realize the fault identification of the thruster. The fault accommodation unit is based on direct calculations of moment and the result of fault identification is used to find the solution of the control allocation problem. The approach resolves the continuous faulty identification of the UV. Results from the experiment are provided to illustrate the performance of the proposed method in uncertain continuous faulty situation.
-
Directory of Open Access Journals (Sweden)
Qian Liu
2009-12-01
Full Text Available A novel thruster fault diagnosis and accommodation method for open-frame underwater vehicles is presented in the paper. The proposed system consists of two units: a fault diagnosis unit and a fault accommodation unit. In the fault diagnosis unit an ICMAC (Improved Credit Assignment Cerebellar Model Articulation Controllers neural network information fusion model is used to realize the fault identification of the thruster. The fault accommodation unit is based on direct calculations of moment and the result of fault identification is used to find the solution of the control allocation problem. The approach resolves the continuous faulty identification of the UV. Results from the experiment are provided to illustrate the performance of the proposed method in uncertain continuous faulty situation.
-
Directory of Open Access Journals (Sweden)
Rafael dos Santos Costa
2011-01-01
Full Text Available O desenvolvimento do processo de rigor mortis nas carcaças dos animais de açougue influenciam diretamente a qualidade da carne. As características do processo de rigor mortis em carcaça de ovinos durante o processamento industrial para obtenção de carcaças resfriadas já foram estudadas em outros países e no Brasil em ovinos Santa Inês, mas ainda não estabelecidas em ovinos F1 Santa Inês x Dorper. Assim, objetivou-se neste trabalho caracterizar o processo de rigor mortis dos músculos Semitendinosus e Triceps brachii durante o resfriamento industrial e maciez da carne, em 10 carcaças ovinas. Foram escolhidos aleatoriamente 10 ovinos machos inteiros, sendo seis da raça Santa Inês e quatro F1 Santa Inês x Dorper, abatidos no Matadouro Frigorífico de Campos - Campos dos Goytacazes, Rio de Janeiro. Após a sangria, analisou-se temperatura, pH, comprimento de sarcômero em diferentes intervalos de tempo (4h; 6h; 8h; 10h; 12h; e 24h e força de cisalhamento ou maciez às 48h, do músculo Semitendinosus. Paralelamente, foi realizada a correlação entre a análise sensorial e a análise instrumental desse músculo. A temperatura da câmara fria variou de 12,2°C (4h a -0,5°C (24h e a temperatura média das carcaças foi de 26,80°C e -0,20°C, respectivamente. O pH médio inicial do músculo Semitendinosus foi de 6,62 e o final 5,64 enquanto no músculo T. brachii foi de 6,50 (4h e 5,68 (24h. A contração máxima do sarcômero do músculo Semitendinosus ocorreu na 12ªh(1,50mm após a sangria e no músculo Triceps brachii, no intervalo entre a 10ªh e 24ªh (1,53 a 1,57mm. No músculo Semitendinosus a força de cisalhamento ou maciez foi semelhante entre cordeiros da raça Santa Inês e F1 Santa Inês x Dorper, demonstrando que o grupo genético não influencia na maciez da carne. O painel sensorial confirmou os resultados obtidos na análise instrumental. Na correlação da análise instrumental (força de cisalhamento com a an
-
National Oceanic and Atmospheric Administration, Department of Commerce — Through the study of faults and their effects, much can be learned about the size and recurrence intervals of earthquakes. Faults also teach us about crustal...
-
Directory of Open Access Journals (Sweden)
Maria da Graça Teixeira Portes
2010-04-01
Full Text Available INTRODUÇÃO: No Brasil, a Região Amazônica é endêmica em malária. Em Santa Catarina, a malária foi eliminada na década de 80. A partir daí, ocorreram poucos casos autóctones isolados, e esporádicos. No entanto, em função da existência do vetor em seu território, da existência de extensa área endêmica no Brasil e da grande mobilidade de pessoas em áreas turísticas no estado, existe a probabilidade de reintrodução da doença. MÉTODOS: Utilizou-se os seguintes dados: Banco de Dados do Núcleo de Entomologia da Fundação Nacional de Saúde, Santa Catarina (ACCES,1997-2000; Sistema de Informação de Vigilância Epidemiológica, Secretaria de Vigilância em Saúde (Malária/SC e Sistema de Informação de Notificação e Agravo(SINAN/SC. Os mesmos foram transportados e analisados, no programa Microsoft Office Excel 2007. RESULTADOS: As coletas foram realizadas em 48 municípios, 159 localidades, sendo identificados 12.310 Culicídeos, 11.546 (93,7% Anopheles e 764 (6,2% como outros. Foram identificados três subgêneros e 13 espécies de anofelinos. CONCLUSÕES: Considerando que nos municípios pesquisados, foi identificada a presença de importantes vetores como Anopheles cruzii e Anopheles albitasis e há circulação de pessoas infectadas provenientes de áreas endêmicas, pode-se considerar que os mesmos são áreas receptivas e vulneráveis à malária. Essas espécies são suspeitas de serem responsáveis pela transmissão de malária na região, principalmente nos municípios de Gaspar, Indaial e Rodeio.INTRODUCTION: The Amazon region of Brazil is endemic for malaria. In the State of Santa Catarina, malaria was eliminated in the 1980s. Since then, a few sporadic isolated autochthonous cases have occurred. However, because malaria vectors are present within Brazilian territory and extensive endemic areas exist in this country, along with the great mobility of people in tourist areas of Santa Catarina, there is the
-
A Design Method for Fault Reconfiguration and Fault-Tolerant Control of a Servo Motor
Directory of Open Access Journals (Sweden)
Jing He
2013-01-01
Full Text Available A design scheme that integrates fault reconfiguration and fault-tolerant position control is proposed for a nonlinear servo system with friction. Analysis of the non-linear friction torque and fault in the system is used to guide design of a sliding mode position controller. A sliding mode observer is designed to achieve fault reconfiguration based on the equivalence principle. Thus, active fault-tolerant position control of the system can be realized. A real-time simulation experiment is performed on a hardware-in-loop simulation platform. The results show that the system reconfigures well for both incipient and abrupt faults. Under the fault-tolerant control mechanism, the output signal for the system position can rapidly track given values without being influenced by faults.
-
Active Fault Isolation in MIMO Systems
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Poulsen, Niels Kjølstad
2014-01-01
isolation is based directly on the input/output s ignals applied for the fault detection. It is guaranteed that the fault group includes the fault that had occurred in the system. The second step is individual fault isolation in the fault group . Both types of isolation are obtained by applying dedicated......Active fault isolation of parametric faults in closed-loop MIMO system s are considered in this paper. The fault isolation consists of two steps. T he first step is group- wise fault isolation. Here, a group of faults is isolated from other pos sible faults in the system. The group-wise fault...
-
Fault Features Extraction and Identification based Rolling Bearing Fault Diagnosis
International Nuclear Information System (INIS)
Qin, B; Sun, G D; Zhang L Y; Wang J G; HU, J
2017-01-01
For the fault classification model based on extreme learning machine (ELM), the diagnosis accuracy and stability of rolling bearing is greatly influenced by a critical parameter, which is the number of nodes in hidden layer of ELM. An adaptive adjustment strategy is proposed based on vibrational mode decomposition, permutation entropy, and nuclear kernel extreme learning machine to determine the tunable parameter. First, the vibration signals are measured and then decomposed into different fault feature models based on variation mode decomposition. Then, fault feature of each model is formed to a high dimensional feature vector set based on permutation entropy. Second, the ELM output function is expressed by the inner product of Gauss kernel function to adaptively determine the number of hidden layer nodes. Finally, the high dimension feature vector set is used as the input to establish the kernel ELM rolling bearing fault classification model, and the classification and identification of different fault states of rolling bearings are carried out. In comparison with the fault classification methods based on support vector machine and ELM, the experimental results show that the proposed method has higher classification accuracy and better generalization ability. (paper)
-
Hamlin, S.N.
1985-01-01
Groundwater quality in the upper Santa Ynez River Valley in Santa Barbara County has degraded due to both natural and anthropogenic causes. The semiarid climate and uneven distribution of rainfall has limited freshwater recharge and caused salt buildup in water supplies. Tertiary rocks supply mineralized water. Agricultural activities (irrigation return flow containing fertilizers and pesticides, cultivation, feedlot waste disposal) are a primary cause of water quality degradation. Urban development, which also causes water quality degradation (introduced contaminants, wastewater disposal, septic system discharge, and land fill disposal of waste), has imposed stricter requirements on water supply quality. A well network was designed to monitor changes in groundwater quality related to anthropogenic activities. Information from this network may aid in efficient management of the groundwater basins as public water supplies, centered around three basic goals. First is to increase freshwater recharge to the basins by conjunctive surface/groundwater use and surface-spreading techniques. Second is to optimize groundwater discharge by efficient timing and spacing of pumping. Third is to control and reduce sources of groundwater contamination by regulating wastewater quality and distribution and, preferably, by exporting wastewaters from the basin. (USGS)
-
Guaranteed Cost Fault-Tolerant Control for Networked Control Systems with Sensor Faults
Directory of Open Access Journals (Sweden)
Qixin Zhu
2015-01-01
Full Text Available For the large scale and complicated structure of networked control systems, time-varying sensor faults could inevitably occur when the system works in a poor environment. Guaranteed cost fault-tolerant controller for the new networked control systems with time-varying sensor faults is designed in this paper. Based on time delay of the network transmission environment, the networked control systems with sensor faults are modeled as a discrete-time system with uncertain parameters. And the model of networked control systems is related to the boundary values of the sensor faults. Moreover, using Lyapunov stability theory and linear matrix inequalities (LMI approach, the guaranteed cost fault-tolerant controller is verified to render such networked control systems asymptotically stable. Finally, simulations are included to demonstrate the theoretical results.
-
Breeding and trade of wildlife in Santa Catarina state, Brazil
Directory of Open Access Journals (Sweden)
VV Kuhnen
Full Text Available The wildlife trade is becoming increasingly more relevant in discussions concerning conservation biology and the sustainable management of natural resources. The aim of this study was to document the trade and breeding of wildlife in Santa Catarina state, in southern Brazil. Data was collected from annual reports (1996-2008 of wildlife breeders which were sent to IBAMA. By the end of 2008, there were 79 wildlife breeders and 11 wildlife traders distributed in Santa Catarina. Commercial breeding accounted for the highest number of breeders (51%. In total, there are 213 species of wild animals bred in the state: 177 birds, 19 mammals and 17 reptiles. Of these, 48% are native to Santa Catarina, 32% occur in other Brazilian states and 20% are exotic to Brazil. Nine percent of the species bred are vulnerable or endangered. It was observed that some breeders reported breeding unauthorized species. Altogether, 93 species are bred illegally by 19 breeders. Of these species, 48 are native to Santa Catarina and three are classified as vulnerable or in danger of extinction. We hope the data presented in this paper contributes to the development of conservation strategies and conscious use of wildlife resources in Brazil.
-
Homogeneity of small-scale earthquake faulting, stress, and fault strength
Hardebeck, J.L.
2006-01-01
Small-scale faulting at seismogenic depths in the crust appears to be more homogeneous than previously thought. I study three new high-quality focal-mechanism datasets of small (M angular difference between their focal mechanisms. Closely spaced earthquakes (interhypocentral distance faults of many orientations may or may not be present, only similarly oriented fault planes produce earthquakes contemporaneously. On these short length scales, the crustal stress orientation and fault strength (coefficient of friction) are inferred to be homogeneous as well, to produce such similar earthquakes. Over larger length scales (???2-50 km), focal mechanisms become more diverse with increasing interhypocentral distance (differing on average by 40-70??). Mechanism variability on ???2- to 50 km length scales can be explained by ralatively small variations (???30%) in stress or fault strength. It is possible that most of this small apparent heterogeneity in stress of strength comes from measurement error in the focal mechanisms, as negligibble variation in stress or fault strength (<10%) is needed if each earthquake is assigned the optimally oriented focal mechanism within the 1-sigma confidence region. This local homogeneity in stress orientation and fault strength is encouraging, implying it may be possible to measure these parameters with enough precision to be useful in studying and modeling large earthquakes.
-
2012-08-01
RAS Fellow Prof. Monica Grady has been made a Commander of the Most Excellent Order of the British Empire (CBE), in recognition of her services to space science. The RAS sponsors the annual Grubb Parsons Lecture, which this year took place on 6 June at the University of Durham. If you are a professional astronomer, geophysicist, or similar, a student studying these disciplines, or simply someone with a serious interest in them, we urge you to apply for membership of the RAS. Outreach is an important activity for the RAS. We recently supported an astronomy series called Deep Space High on the digital radio channel Fun Kids.
-
Directory of Open Access Journals (Sweden)
Ladislav Placer
2008-06-01
Full Text Available During mapping of the already accomplished Razdrto – Senožeče section of motorway and geologic surveying of construction operations of the trunk road between Razdrto and Vipava in northwestern part of External Dinarides on the southwestern slope of Mt. Nanos, called Rebrnice, a steep NW-SE striking fault was recognized, situated between the Predjama and the Ra{a faults. The fault was named Vipava fault after the Vipava town. An analysis of subrecent gravitational slips at Rebrnice indicates that they were probably associated with the activity of this fault. Unpublished results of a repeated levelling line along the regional road passing across the Vipava fault zone suggest its possible present activity. It would be meaningful to verify this by appropriate geodetic measurements, and to study the actual gravitational slips at Rebrnice. The association between tectonics and gravitational slips in this and in similar extreme cases in the areas of Alps and Dinarides points at the need of complex studying of geologic proceses.
-
[Santa Claus is perceived as reliable and friendly: results of the Danish Christmas 2013 survey].
Amin, Faisal Mohammad; West, Anders Sode; Jørgensen, Carina Sleiborg; Simonsen, Sofie Amalie; Lindberg, Ulrich; Tranum-Jensen, Jørgen; Hougaard, Anders
2013-12-02
Several studies have indicated that the population in general perceives doctors as reliable. In the present study perceptions of reliability and kindness attributed to another socially significant archetype, Santa Claus, have been comparatively examined in relation to the doctor. In all, 52 randomly chosen participants were shown a film, where a narrator dressed either as Santa Claus or as a doctor tells an identical story. Structured interviews were then used to assess the subjects' perceptions of reliability and kindness in relation to the narrator's appearance. We found a strong inclination for Santa Claus being perceived as friendlier than the doctor (p = 0.053). However, there was no significant difference in the perception of reliability between Santa Claus and the doctor (p = 0.524). The positive associations attributed to Santa Claus probably cause that he is perceived friendlier than the doctor who may be associated with more serious and unpleasant memories of illness and suffering. Surprisingly, and despite him being an imaginary person, Santa Claus was assessed as being as reliable as the doctor.
-
International Nuclear Information System (INIS)
Park, Joo Hyun
1994-02-01
In this work, the Fuzzy Signed Digraph(FSD) method which has been researched for the fault diagnosis of industrial process plant systems is improved and applied to the fault diagnosis of the Kori-2 nuclear power plant pressurizer. A method for spurious faults elimination is also suggested and applied to the fault diagnosis. By using these methods, we could diagnose the multi-faults of the pressurizer and could also eliminate the spurious faults of the pressurizer caused by other subsystems. Besides the multi-fault diagnosis and system-wide diagnosis capabilities, the proposed method has many merits such as real-time diagnosis capability, independency of fault pattern, direct use of sensor values, and transparency of the fault propagation to the operators
-
International Nuclear Information System (INIS)
Park, Joo Hyun; Seong, Poong Hyun
1994-01-01
In this work, the Fuzzy Signed Digraph (FSD) method which has been researched for the fault diagnosis of industrial process plant systems is improved and applied to the fault diagnosis of the Kori-2 nuclear power plant pressurizer. A method for spurious faults elimination is also suggested and applied to the fault diagnosis. By using these methods, we could diagnose the multi-faults of the pressurizer and could also eliminate the spurious faults of the pressurizer caused by other subsystems. Besides the multi-fault diagnosis and system-wide diagnosis capabilities, the proposed method has many merits such as real-time diagnosis capability, independency of fault pattern, direct use of sensor values, and transparency of the fault propagation to the operators. (Author)
-
Diagnosis and fault-tolerant control
Blanke, Mogens; Lunze, Jan; Staroswiecki, Marcel
2016-01-01
Fault-tolerant control aims at a gradual shutdown response in automated systems when faults occur. It satisfies the industrial demand for enhanced availability and safety, in contrast to traditional reactions to faults, which bring about sudden shutdowns and loss of availability. The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process that can be used to ensure fault tolerance. It also introduces design methods suitable for diagnostic systems and fault-tolerant controllers for continuous processes that are described by analytical models of discrete-event systems represented by automata. The book is suitable for engineering students, engineers in industry and researchers who wish to get an overview of the variety of approaches to process diagnosis and fault-tolerant contro...
-
Ecotourism: The Santa Elena Rainforest Project.
Wearing, Stephen
1993-01-01
Describes an ecotourism project in which the community of Santa Elena, Costa Rica, are developing a rainforest reserve on government land leased permanently to the local high school. Discusses the impact of the project on the community's economy and environment. (Contains 30 references.) (MDH)
-
Optimal design of superconducting fault detector for superconductor triggered fault current limiters
International Nuclear Information System (INIS)
Yim, S.-W.; Kim, H.-R.; Hyun, O.-B.; Sim, J.; Park, K.B.; Lee, B.W.
2008-01-01
We have designed and tested a superconducting fault detector (SFD) for a 22.9 kV superconductor triggered fault current limiters (STFCLs) using Au/YBCO thin films. The SFD is to detect a fault and commutate the current from the primary path to the secondary path of the STFCL. First, quench characteristics of the Au/YBCO thin films were investigated for various faults having different fault duration. The rated voltage of the Au/YBCO thin films was determined from the results, considering the stability of the Au/YBCO elements. Second, the recovery time to superconductivity after quench was measured in each fault case. In addition, the dependence of the recovery characteristics on numbers and dimension of Au/YBCO elements were investigated. Based on the results, a SFD was designed, fabricated and tested. The SFD successfully detected a fault current and carried out the line commutation. Its recovery time was confirmed to be less than 0.5 s, satisfying the reclosing scheme in the Korea Electric Power Corporation (KEPCO)'s power grid
-
Perrin, C.; Manighetti, I.; Gaudemer, Y.
2015-12-01
Faults grow over the long-term by accumulating displacement and lengthening, i.e., propagating laterally. We use fault maps and fault propagation evidences available in literature to examine geometrical relations between parent faults and off-fault splays. The population includes 47 worldwide crustal faults with lengths from millimeters to thousands of kilometers and of different slip modes. We show that fault splays form adjacent to any propagating fault tip, whereas they are absent at non-propagating fault ends. Independent of parent fault length, slip mode, context, etc, tip splay networks have a similar fan shape widening in direction of long-term propagation, a similar relative length and width (~30 and ~10 % of parent fault length, respectively), and a similar range of mean angles to parent fault (10-20°). Tip splays more commonly develop on one side only of the parent fault. We infer that tip splay networks are a genetic and a generic property of faults indicative of their long-term propagation. We suggest that they represent the most recent damage off-the parent fault, formed during the most recent phase of fault lengthening. The scaling relation between parent fault length and width of tip splay network implies that damage zones enlarge as parent fault length increases. Elastic properties of host rocks might thus be modified at large distances away from a fault, up to 10% of its length. During an earthquake, a significant fraction of coseismic slip and stress is dissipated into the permanent damage zone that surrounds the causative fault. We infer that coseismic dissipation might occur away from a rupture zone as far as a distance of 10% of the length of its causative fault. Coseismic deformations and stress transfers might thus be significant in broad regions about principal rupture traces. This work has been published in Comptes Rendus Geoscience under doi:10.1016/j.crte.2015.05.002 (http://www.sciencedirect.com/science/article/pii/S1631071315000528).
-
Data-based fault-tolerant control for affine nonlinear systems with actuator faults.
Xie, Chun-Hua; Yang, Guang-Hong
2016-09-01
This paper investigates the fault-tolerant control (FTC) problem for unknown nonlinear systems with actuator faults including stuck, outage, bias and loss of effectiveness. The upper bounds of stuck faults, bias faults and loss of effectiveness faults are unknown. A new data-based FTC scheme is proposed. It consists of the online estimations of the bounds and a state-dependent function. The estimations are adjusted online to compensate automatically the actuator faults. The state-dependent function solved by using real system data helps to stabilize the system. Furthermore, all signals in the resulting closed-loop system are uniformly bounded and the states converge asymptotically to zero. Compared with the existing results, the proposed approach is data-based. Finally, two simulation examples are provided to show the effectiveness of the proposed approach. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.
-
RECENT GEODYNAMICS OF FAULT ZONES: FAULTING IN REAL TIME SCALE
Directory of Open Access Journals (Sweden)
Yu. O. Kuzmin
2014-01-01
Full Text Available Recent deformation processes taking place in real time are analyzed on the basis of data on fault zones which were collected by long-term detailed geodetic survey studies with application of field methods and satellite monitoring.A new category of recent crustal movements is described and termed as parametrically induced tectonic strain in fault zones. It is shown that in the fault zones located in seismically active and aseismic regions, super intensive displacements of the crust (5 to 7 cm per year, i.e. (5 to 7·10–5 per year occur due to very small external impacts of natural or technogenic / industrial origin.The spatial discreteness of anomalous deformation processes is established along the strike of the regional Rechitsky fault in the Pripyat basin. It is concluded that recent anomalous activity of the fault zones needs to be taken into account in defining regional regularities of geodynamic processes on the basis of real-time measurements.The paper presents results of analyses of data collected by long-term (20 to 50 years geodetic surveys in highly seismically active regions of Kopetdag, Kamchatka and California. It is evidenced by instrumental geodetic measurements of recent vertical and horizontal displacements in fault zones that deformations are ‘paradoxically’ deviating from the inherited movements of the past geological periods.In terms of the recent geodynamics, the ‘paradoxes’ of high and low strain velocities are related to a reliable empirical fact of the presence of extremely high local velocities of deformations in the fault zones (about 10–5 per year and above, which take place at the background of slow regional deformations which velocities are lower by the order of 2 to 3. Very low average annual velocities of horizontal deformation are recorded in the seismic regions of Kopetdag and Kamchatka and in the San Andreas fault zone; they amount to only 3 to 5 amplitudes of the earth tidal deformations per year.A ‘fault
-
Fault-tolerant computing systems
International Nuclear Information System (INIS)
Dal Cin, M.; Hohl, W.
1991-01-01
Tests, Diagnosis and Fault Treatment were chosen as the guiding themes of the conference. However, the scope of the conference included reliability, availability, safety and security issues in software and hardware systems as well. The sessions were organized for the conference which was completed by an industrial presentation: Keynote Address, Reconfiguration and Recover, System Level Diagnosis, Voting and Agreement, Testing, Fault-Tolerant Circuits, Array Testing, Modelling, Applied Fault Tolerance, Fault-Tolerant Arrays and Systems, Interconnection Networks, Fault-Tolerant Software. One paper has been indexed separately in the database. (orig./HP)
-
DEFF Research Database (Denmark)
Wietlisbach, V; Marques-Vidal, P; Kuulasmaa, K
2013-01-01
BACKGROUND AND AIMS: The association between adiposity measures and dyslipidemia has seldom been assessed in a multipopulational setting. METHODS AND RESULTS: 27 populations from Europe, Australia, New Zealand and Canada (WHO MONICA project) using health surveys conducted between 1990 and 1997...... in adults aged 35-64 years (n = 40,480). Dyslipidemia was defined as the total/HDL cholesterol ratio >6 (men) and >5 (women). Overall prevalence of dyslipidemia was 25% in men and 23% in women. Logistic regression showed that dyslipidemia was strongly associated with body mass index (BMI) in men......, do not lead to optimal risk stratification for dyslipidemia in middle-age adults. Sex-specific adaptations are necessary, in particular by taking into account abdominal obesity in normal-weight men, post-menopausal age in women and regular smoking in both sexes....
-
Recent recoveries of archaeological ceramics on Santa Isabel, central Solomon Islands
International Nuclear Information System (INIS)
Carter, M.J.; Roe, D.; Keopo, J.
2012-01-01
Recent field investigations on Santa Isabel in the Central Solomon Islands have revealed the presence of archaeological pottery in both terrestrial and intertidal contexts. Preliminary dating results and comparative stylistic analyses of sherds provide evidence to suggest an antiquity of ceramics in northwest Isabel spanning the late Holocene to the recent historic past. These research outcomes expand the known distribution of pottery within the Solomon Islands and provide new knowledge about the prehistory of Santa Isabel. Here we describe the Santa Isabel ceramics, and suggest several implications of the research for current settlement models of the Solomon Islands and for our understanding of the variability in the archaeological record of mid- to late-Holocene ceramic distribution throughout the region. (author). 24 refs., 7 figs.
-
Active Fault-Tolerant Control for Wind Turbine with Simultaneous Actuator and Sensor Faults
Directory of Open Access Journals (Sweden)
Lei Wang
2017-01-01
Full Text Available The purpose of this paper is to show a novel fault-tolerant tracking control (FTC strategy with robust fault estimation and compensating for simultaneous actuator sensor faults. Based on the framework of fault-tolerant control, developing an FTC design method for wind turbines is a challenge and, thus, they can tolerate simultaneous pitch actuator and pitch sensor faults having bounded first time derivatives. The paper’s key contribution is proposing a descriptor sliding mode method, in which for establishing a novel augmented descriptor system, with which we can estimate the state of system and reconstruct fault by designing descriptor sliding mode observer, the paper introduces an auxiliary descriptor state vector composed by a system state vector, actuator fault vector, and sensor fault vector. By the optimized method of LMI, the conditions for stability that estimated error dynamics are set up to promote the determination of the parameters designed. With this estimation, and designing a fault-tolerant controller, the system’s stability can be maintained. The effectiveness of the design strategy is verified by implementing the controller in the National Renewable Energy Laboratory’s 5-MW nonlinear, high-fidelity wind turbine model (FAST and simulating it in MATLAB/Simulink.
-
The San Andreas Fault and a Strike-slip Fault on Europa
1998-01-01
The mosaic on the right of the south polar region of Jupiter's moon Europa shows the northern 290 kilometers (180 miles) of a strike-slip fault named Astypalaea Linea. The entire fault is about 810 kilometers (500 miles) long, the size of the California portion of the San Andreas fault on Earth which runs from the California-Mexico border north to the San Francisco Bay. The left mosaic shows the portion of the San Andreas fault near California's san Francisco Bay that has been scaled to the same size and resolution as the Europa image. Each covers an area approximately 170 by 193 kilometers(105 by 120 miles). The red line marks the once active central crack of the Europan fault (right) and the line of the San Andreas fault (left). A strike-slip fault is one in which two crustal blocks move horizontally past one another, similar to two opposing lanes of traffic. The overall motion along the Europan fault seems to have followed a continuous narrow crack along the entire length of the feature, with a path resembling stepson a staircase crossing zones which have been pulled apart. The images show that about 50 kilometers (30 miles) of displacement have taken place along the fault. Opposite sides of the fault can be reconstructed like a puzzle, matching the shape of the sides as well as older individual cracks and ridges that had been broken by its movements. Bends in the Europan fault have allowed the surface to be pulled apart. This pulling-apart along the fault's bends created openings through which warmer, softer ice from below Europa's brittle ice shell surface, or frozen water from a possible subsurface ocean, could reach the surface. This upwelling of material formed large areas of new ice within the boundaries of the original fault. A similar pulling apart phenomenon can be observed in the geological trough surrounding California's Salton Sea, and in Death Valley and the Dead Sea. In those cases, the pulled apart regions can include upwelled materials, but may
-
Nishikawa, Tracy
2013-01-01
The Santa Rosa Plain is home to approximately half of the population of Sonoma County, California, and faces growth in population and demand for water. Water managers are confronted with the challenge of meeting the increasing water demand with a combination of water sources, including local groundwater, whose future availability could be uncertain. To meet this challenge, water managers are seeking to acquire the knowledge and tools needed to understand the likely effects of future groundwater development in the Santa Rosa Plain and to identify efficient strategies for surface- and groundwater management that will ensure the long-term viability of the water supply. The U.S. Geological Survey, in cooperation with the Sonoma County Water Agency and other stakeholders in the area (cities of Cotati, Rohnert Park, Santa Rosa, and Sebastopol, town of Windsor, Cal-American Water Company, and the County of Sonoma), undertook this study to characterize the hydrology of the Santa Rosa Plain and to develop tools to better understand and manage the groundwater system. The objectives of the study are: (1) to develop an updated assessment of the hydrogeology and geochemistry of the Santa Rosa Plain; (2) to develop a fully coupled surface-water and groundwater-flow model for the Santa Rosa Plain watershed; and (3) to evaluate the potential hydrologic effects of alternative groundwater-management strategies for the basin. The purpose of this report is to describe the surface-water and groundwater hydrology, hydrogeology, and water-quality characteristics of the Santa Rosa Plain watershed and to develop a conceptual model of the hydrologic system in support of the first objective. The results from completing the second and third objectives will be described in a separate report.
-
Energy Technology Data Exchange (ETDEWEB)
NONE
1970-07-01
The main objective of this study was to orient the development of water resources of the Santa Lucia River basin to maximum benefit in accordance with the priorities established by Government in relation to the National Development Plans
-
International Nuclear Information System (INIS)
Lee, Hee Kwon
2005-01-01
We carried out ESR dating of fault rocks collected near the nuclear reactor. The Upcheon fault zone is exposed close to the Ulzin nuclear reactor. The space-time pattern of fault activity on the Upcheon fault deduced from ESR dating of fault gouge can be summarised as follows : this fault zone was reactivated between fault breccia derived from Cretaceous sandstone and tertiary volcanic sedimentary rocks about 2 Ma, 1.5 Ma and 1 Ma ago. After those movements, the Upcheon fault was reactivated between Cretaceous sandstone and fault breccia zone about 800 ka ago. This fault zone was reactivated again between fault breccia derived form Cretaceous sandstone and Tertiary volcanic sedimentary rocks about 650 ka and after 125 ka ago. These data suggest that the long-term(200-500 k.y.) cyclic fault activity of the Upcheon fault zone continued into the Pleistocene. In the Ulzin area, ESR dates from the NW and EW trend faults range from 800 ka to 600 ka NE and EW trend faults were reactivated about between 200 ka and 300 ka ago. On the other hand, ESR date of the NS trend fault is about 400 ka and 50 ka. Results of this research suggest the fault activity near the Ulzin nuclear reactor fault activity continued into the Pleistocene. One ESR date near the Youngkwang nuclear reactor is 200 ka
-
Deformation around basin scale normal faults
International Nuclear Information System (INIS)
Spahic, D.
2010-01-01
Faults in the earth crust occur within large range of scales from microscale over mesoscopic to large basin scale faults. Frequently deformation associated with faulting is not only limited to the fault plane alone, but rather forms a combination with continuous near field deformation in the wall rock, a phenomenon that is generally called fault drag. The correct interpretation and recognition of fault drag is fundamental for the reconstruction of the fault history and determination of fault kinematics, as well as prediction in areas of limited exposure or beyond comprehensive seismic resolution. Based on fault analyses derived from 3D visualization of natural examples of fault drag, the importance of fault geometry for the deformation of marker horizons around faults is investigated. The complex 3D structural models presented here are based on a combination of geophysical datasets and geological fieldwork. On an outcrop scale example of fault drag in the hanging wall of a normal fault, located at St. Margarethen, Burgenland, Austria, data from Ground Penetrating Radar (GPR) measurements, detailed mapping and terrestrial laser scanning were used to construct a high-resolution structural model of the fault plane, the deformed marker horizons and associated secondary faults. In order to obtain geometrical information about the largely unexposed master fault surface, a standard listric balancing dip domain technique was employed. The results indicate that for this normal fault a listric shape can be excluded, as the constructed fault has a geologically meaningless shape cutting upsection into the sedimentary strata. This kinematic modeling result is additionally supported by the observation of deformed horizons in the footwall of the structure. Alternatively, a planar fault model with reverse drag of markers in the hanging wall and footwall is proposed. Deformation around basin scale normal faults. A second part of this thesis investigates a large scale normal fault
-
Blækkan, Ingvild; Bell, Rebecca; Rotevatn, Atle; Jackson, Christopher; Tvedt, Anette
2018-01-01
Faults grow via a sympathetic increase in their displacement and length (isolated fault model), or by rapid length establishment and subsequent displacement accrual (constant-length fault model). To test the significance and applicability of these two models, we use time-series displacement (D) and length (L) data extracted for faults from nature and experiments. We document a range of fault behaviours, from sympathetic D-L fault growth (isolated growth) to sub-vertical D-L growth trajectorie...
-
Fault diagnosis of power transformer based on fault-tree analysis (FTA)
Wang, Yongliang; Li, Xiaoqiang; Ma, Jianwei; Li, SuoYu
2017-05-01
Power transformers is an important equipment in power plants and substations, power distribution transmission link is made an important hub of power systems. Its performance directly affects the quality and health of the power system reliability and stability. This paper summarizes the five parts according to the fault type power transformers, then from the time dimension divided into three stages of power transformer fault, use DGA routine analysis and infrared diagnostics criterion set power transformer running state, finally, according to the needs of power transformer fault diagnosis, by the general to the section by stepwise refinement of dendritic tree constructed power transformer fault
-
Large earthquakes and creeping faults
Harris, Ruth A.
2017-01-01
Faults are ubiquitous throughout the Earth's crust. The majority are silent for decades to centuries, until they suddenly rupture and produce earthquakes. With a focus on shallow continental active-tectonic regions, this paper reviews a subset of faults that have a different behavior. These unusual faults slowly creep for long periods of time and produce many small earthquakes. The presence of fault creep and the related microseismicity helps illuminate faults that might not otherwise be located in fine detail, but there is also the question of how creeping faults contribute to seismic hazard. It appears that well-recorded creeping fault earthquakes of up to magnitude 6.6 that have occurred in shallow continental regions produce similar fault-surface rupture areas and similar peak ground shaking as their locked fault counterparts of the same earthquake magnitude. The behavior of much larger earthquakes on shallow creeping continental faults is less well known, because there is a dearth of comprehensive observations. Computational simulations provide an opportunity to fill the gaps in our understanding, particularly of the dynamic processes that occur during large earthquake rupture and arrest.
-
A novel KFCM based fault diagnosis method for unknown faults in satellite reaction wheels.
Hu, Di; Sarosh, Ali; Dong, Yun-Feng
2012-03-01
Reaction wheels are one of the most critical components of the satellite attitude control system, therefore correct diagnosis of their faults is quintessential for efficient operation of these spacecraft. The known faults in any of the subsystems are often diagnosed by supervised learning algorithms, however, this method fails to work correctly when a new or unknown fault occurs. In such cases an unsupervised learning algorithm becomes essential for obtaining the correct diagnosis. Kernel Fuzzy C-Means (KFCM) is one of the unsupervised algorithms, although it has its own limitations; however in this paper a novel method has been proposed for conditioning of KFCM method (C-KFCM) so that it can be effectively used for fault diagnosis of both known and unknown faults as in satellite reaction wheels. The C-KFCM approach involves determination of exact class centers from the data of known faults, in this way discrete number of fault classes are determined at the start. Similarity parameters are derived and determined for each of the fault data point. Thereafter depending on the similarity threshold each data point is issued with a class label. The high similarity points fall into one of the 'known-fault' classes while the low similarity points are labeled as 'unknown-faults'. Simulation results show that as compared to the supervised algorithm such as neural network, the C-KFCM method can effectively cluster historical fault data (as in reaction wheels) and diagnose the faults to an accuracy of more than 91%. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.
-
Umhoefer, P. J.; Skinner, L. A.; Oskin, M. E.; Dorsey, R. J.; Bennett, S. E. K.; Darin, M. H.
2017-12-01
Studies from multiple disciplines delineate the development of the oblique-divergent Pacific - North America plate boundary in the southern Gulf of California. Integration of onshore data from the Loreto - Santa Rosalia margin with offshore data from the Pescadero, Farallon, and Guaymas basins provides a detailed geologic history. Our GIS-based paleotectonic maps of the plate boundary from 9 to 6 Ma show that evolution of pull-apart basins led to the episodic northwestward encroachment of the Gulf of California seaway. Because adjacent pull-apart basins commonly have highlands between them, juxtaposition of adjacent basin lows during translation and pull apart lengthening played a critical role in seaway flooding. Microfossils and volcanic units date the earliest marine deposits at 9(?) - 8 Ma at the mouth of the Gulf. By ca. 8 Ma, the seaway had flooded north to the Pescadero basin, while the Loreto fault and the related fault-termination basin was proposed to have formed along strike at the plate margin. East of Loreto basin, a short topographic barrier between the Pescadero and Farallon pull-apart basins suggests that the Farallon basin was either a terrestrial basin, or if breaching occurred, it may contain 8 Ma salt or marine deposits. This early southern seaway formed along a series of pull-apart basins within a narrow belt of transtension structurally similar to the modern Walker Lane in NV and CA. At ca. 7 Ma, a series of marine incursions breached a 75-100 km long transtensional fault barrier between the Farallon and Guaymas basins offshore Bahía Concepción. Repeated breaching events and the isolation of the Guaymas basin in a subtropical setting formed a 2 km-thick salt deposit imaged in offshore seismic data, and thin evaporite deposits in the onshore Santa Rosalia basin. Lengthening of the Guaymas, Yaqui, and Tiburon basins caused breaches of the intervening Guaymas and Tiburón transforms by 6.5-6.3 Ma, forming a permanent 1500 km-long marine seaway
-
Identifying Conventionally Sub-Seismic Faults in Polygonal Fault Systems
Fry, C.; Dix, J.
2017-12-01
Polygonal Fault Systems (PFS) are prevalent in hydrocarbon basins globally and represent potential fluid pathways. However the characterization of these pathways is subject to the limitations of conventional 3D seismic imaging; only capable of resolving features on a decametre scale horizontally and metres scale vertically. While outcrop and core examples can identify smaller features, they are limited by the extent of the exposures. The disparity between these scales can allow for smaller faults to be lost in a resolution gap which could mean potential pathways are left unseen. Here the focus is upon PFS from within the London Clay, a common bedrock that is tunnelled into and bears construction foundations for much of London. It is a continuation of the Ieper Clay where PFS were first identified and is found to approach the seafloor within the Outer Thames Estuary. This allows for the direct analysis of PFS surface expressions, via the use of high resolution 1m bathymetric imaging in combination with high resolution seismic imaging. Through use of these datasets surface expressions of over 1500 faults within the London Clay have been identified, with the smallest fault measuring 12m and the largest at 612m in length. The displacements over these faults established from both bathymetric and seismic imaging ranges from 30cm to a couple of metres, scales that would typically be sub-seismic for conventional basin seismic imaging. The orientations and dimensions of the faults within this network have been directly compared to 3D seismic data of the Ieper Clay from the offshore Dutch sector where it exists approximately 1km below the seafloor. These have typical PFS attributes with lengths of hundreds of metres to kilometres and throws of tens of metres, a magnitude larger than those identified in the Outer Thames Estuary. The similar orientations and polygonal patterns within both locations indicates that the smaller faults exist within typical PFS structure but are
-
South Fork of the Santa Clara River, Santa Clarita Valley, California. Supplement.
1985-01-01
designed as a broad - crested weir to pass the maximum probable flood (PF) with a peak of 24,500 ofs. The spillway crest length of 100 feet and the...well as from the Miocene Topanga sandstone and the Modelo shale found near the crest of the Santa Susana Mountains in Aliso and Rice Canyons. Fossil...440 1.5 .IN THE AREA. 1I0.050: DRAINAGE AREA IS QUITE RUGGED, WITH SHARP RIDGES 4.4 600 1.3 .050 AND NARROW, STEEP CANYONS THROUGH WHICH WATERCOURSES
-
Influence of fault steps on rupture termination of strike-slip earthquake faults
Li, Zhengfang; Zhou, Bengang
2018-03-01
A statistical analysis was completed on the rupture data of 29 historical strike-slip earthquakes across the world. The purpose of this study is to examine the effects of fault steps on the rupture termination of these events. The results show good correlations between the type and length of steps with the seismic rupture and a poor correlation between the step number and seismic rupture. For different magnitude intervals, the smallest widths of the fault steps (Lt) that can terminate the rupture propagation are variable: Lt = 3 km for Ms 6.5 6.9, Lt = 4 km for Ms 7.0 7.5, Lt = 6 km for Ms 7.5 8.0, and Lt = 8 km for Ms 8.0 8.5. The dilational fault step is easier to rupture through than the compression fault step. The smallest widths of the fault step for the rupture arrest can be used as an indicator to judge the scale of the rupture termination of seismic faults. This is helpful for research on fault segmentation, as well as estimating the magnitude of potential earthquakes, and is thus of significance for the assessment of seismic risks.
-
Wang, H.; Jing, X. J.
2017-07-01
This paper presents a virtual beam based approach suitable for conducting diagnosis of multiple faults in complex structures with limited prior knowledge of the faults involved. The "virtual beam", a recently-proposed concept for fault detection in complex structures, is applied, which consists of a chain of sensors representing a vibration energy transmission path embedded in the complex structure. Statistical tests and adaptive threshold are particularly adopted for fault detection due to limited prior knowledge of normal operational conditions and fault conditions. To isolate the multiple faults within a specific structure or substructure of a more complex one, a 'biased running' strategy is developed and embedded within the bacterial-based optimization method to construct effective virtual beams and thus to improve the accuracy of localization. The proposed method is easy and efficient to implement for multiple fault localization with limited prior knowledge of normal conditions and faults. With extensive experimental results, it is validated that the proposed method can localize both single fault and multiple faults more effectively than the classical trust index subtract on negative add on positive (TI-SNAP) method.
-
Study of fault diagnosis software design for complex system based on fault tree
International Nuclear Information System (INIS)
Yuan Run; Li Yazhou; Wang Jianye; Hu Liqin; Wang Jiaqun; Wu Yican
2012-01-01
Complex systems always have high-level reliability and safety requirements, and same does their diagnosis work. As a great deal of fault tree models have been acquired during the design and operation phases, a fault diagnosis method which combines fault tree analysis with knowledge-based technology has been proposed. The prototype of fault diagnosis software has been realized and applied to mobile LIDAR system. (authors)
-
Illite authigenesis during faulting and fluid flow - a microstructural study of fault rocks
Scheiber, Thomas; Viola, Giulio; van der Lelij, Roelant; Margreth, Annina
2017-04-01
Authigenic illite can form synkinematically during slip events along brittle faults. In addition it can also crystallize as a result of fluid flow and associated mineral alteration processes in hydrothermal environments. K-Ar dating of illite-bearing fault rocks has recently become a common tool to constrain the timing of fault activity. However, to fully interpret the derived age spectra in terms of deformation ages, a careful investigation of the fault deformation history and architecture at the outcrop-scale, ideally followed by a detailed mineralogical analysis of the illite-forming processes at the micro-scale, are indispensable. Here we integrate this methodological approach by presenting microstructural observations from the host rock immediately adjacent to dated fault gouges from two sites located in the Rolvsnes granodiorite (Bømlo, western Norway). This granodiorite experienced multiple episodes of brittle faulting and fluid-induced alteration, starting in the Mid Ordovician (Scheiber et al., 2016). Fault gouges are predominantly associated with normal faults accommodating mainly E-W extension. K-Ar dating of illites separated from representative fault gouges constrains deformation and alteration due to fluid ingress from the Permian to the Cretaceous, with a cluster of ages for the finest (middle Jurassic. At site one, high-resolution thin section structural mapping reveals a complex deformation history characterized by several coexisting types of calcite veins and seven different generations of cataclasite, two of which contain a significant amount of authigenic and undoubtedly deformation-related illite. At site two, fluid ingress along and adjoining the fault core induced pervasive alteration of the host granodiorite. Quartz is crosscut by calcite veinlets whereas plagioclase, K-feldspar and biotite are almost completely replaced by the main alteration products kaolin, quartz and illite. Illite-bearing micro-domains were physically separated by
-
Ye, Jiyang; Liu, Mian
2017-08-01
In Southern California, the Pacific-North America relative plate motion is accommodated by the complex southern San Andreas Fault system that includes many young faults (faults and their impact on strain partitioning and fault slip rates are important for understanding the evolution of this plate boundary zone and assessing earthquake hazard in Southern California. Using a three-dimensional viscoelastoplastic finite element model, we have investigated how this plate boundary fault system has evolved to accommodate the relative plate motion in Southern California. Our results show that when the plate boundary faults are not optimally configured to accommodate the relative plate motion, strain is localized in places where new faults would initiate to improve the mechanical efficiency of the fault system. In particular, the Eastern California Shear Zone, the San Jacinto Fault, the Elsinore Fault, and the offshore dextral faults all developed in places of highly localized strain. These younger faults compensate for the reduced fault slip on the San Andreas Fault proper because of the Big Bend, a major restraining bend. The evolution of the fault system changes the apportionment of fault slip rates over time, which may explain some of the slip rate discrepancy between geological and geodetic measurements in Southern California. For the present fault configuration, our model predicts localized strain in western Transverse Ranges and along the dextral faults across the Mojave Desert, where numerous damaging earthquakes occurred in recent years.
-
International Nuclear Information System (INIS)
Lee, Hee Kwon
2003-02-01
Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs. grain size shows a plateau for grains below critical size; these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Gori nuclear reactor. Most of the ESR signals of fault rocks collected from the basement are saturated. This indicates that the last movement of the faults had occurred before the Quaternary period. However, ESR dates from the Oyong fault zone range from 370 to 310 ka. Results of this research suggest that long-term cyclic fault activity of the Oyong fault zone continued into the Pleistocene
-
Energy Technology Data Exchange (ETDEWEB)
Lee, Hee Kwon [Kangwon National Univ., Chuncheon (Korea, Republic of)
2003-02-15
Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs. grain size shows a plateau for grains below critical size; these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Gori nuclear reactor. Most of the ESR signals of fault rocks collected from the basement are saturated. This indicates that the last movement of the faults had occurred before the Quaternary period. However, ESR dates from the Oyong fault zone range from 370 to 310 ka. Results of this research suggest that long-term cyclic fault activity of the Oyong fault zone continued into the Pleistocene.
-
Fault-tolerant architecture: Evaluation methodology
International Nuclear Information System (INIS)
Battle, R.E.; Kisner, R.A.
1992-08-01
The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems
-
HOT Faults", Fault Organization, and the Occurrence of the Largest Earthquakes
Carlson, J. M.; Hillers, G.; Archuleta, R. J.
2006-12-01
We apply the concept of "Highly Optimized Tolerance" (HOT) for the investigation of spatio-temporal seismicity evolution, in particular mechanisms associated with largest earthquakes. HOT provides a framework for investigating both qualitative and quantitative features of complex feedback systems that are far from equilibrium and punctuated by rare, catastrophic events. In HOT, robustness trade-offs lead to complexity and power laws in systems that are coupled to evolving environments. HOT was originally inspired by biology and engineering, where systems are internally very highly structured, through biological evolution or deliberate design, and perform in an optimum manner despite fluctuations in their surroundings. Though faults and fault systems are not designed in ways comparable to biological and engineered structures, feedback processes are responsible in a conceptually comparable way for the development, evolution and maintenance of younger fault structures and primary slip surfaces of mature faults, respectively. Hence, in geophysical applications the "optimization" approach is perhaps more aptly replaced by "organization", reflecting the distinction between HOT and random, disorganized configurations, and highlighting the importance of structured interdependencies that evolve via feedback among and between different spatial and temporal scales. Expressed in the terminology of the HOT concept, mature faults represent a configuration optimally organized for the release of strain energy; whereas immature, more heterogeneous fault networks represent intermittent, suboptimal systems that are regularized towards structural simplicity and the ability to generate large earthquakes more easily. We discuss fault structure and associated seismic response pattern within the HOT concept, and outline fundamental differences between this novel interpretation to more orthodox viewpoints like the criticality concept. The discussion is flanked by numerical simulations of a
-
Fault Analysis in Solar Photovoltaic Arrays
Zhao, Ye
Fault analysis in solar photovoltaic (PV) arrays is a fundamental task to increase reliability, efficiency and safety in PV systems. Conventional fault protection methods usually add fuses or circuit breakers in series with PV components. But these protection devices are only able to clear faults and isolate faulty circuits if they carry a large fault current. However, this research shows that faults in PV arrays may not be cleared by fuses under some fault scenarios, due to the current-limiting nature and non-linear output characteristics of PV arrays. First, this thesis introduces new simulation and analytic models that are suitable for fault analysis in PV arrays. Based on the simulation environment, this thesis studies a variety of typical faults in PV arrays, such as ground faults, line-line faults, and mismatch faults. The effect of a maximum power point tracker on fault current is discussed and shown to, at times, prevent the fault current protection devices to trip. A small-scale experimental PV benchmark system has been developed in Northeastern University to further validate the simulation conclusions. Additionally, this thesis examines two types of unique faults found in a PV array that have not been studied in the literature. One is a fault that occurs under low irradiance condition. The other is a fault evolution in a PV array during night-to-day transition. Our simulation and experimental results show that overcurrent protection devices are unable to clear the fault under "low irradiance" and "night-to-day transition". However, the overcurrent protection devices may work properly when the same PV fault occurs in daylight. As a result, a fault under "low irradiance" and "night-to-day transition" might be hidden in the PV array and become a potential hazard for system efficiency and reliability.
-
Horton, J. Wright; Shah, Anjana K.; McNamara, Daniel E.; Snyder, Stephen L.; Carter, Aina M
2015-01-01
Deployment of temporary seismic stations after the 2011 Mineral, Virginia (USA), earthquake produced a well-recorded aftershock sequence. The majority of aftershocks are in a tabular cluster that delineates the previously unknown Quail fault zone. Quail fault zone aftershocks range from ~3 to 8 km in depth and are in a 1-km-thick zone striking ~036° and dipping ~50°SE, consistent with a 028°, 50°SE main-shock nodal plane having mostly reverse slip. This cluster extends ~10 km along strike. The Quail fault zone projects to the surface in gneiss of the Ordovician Chopawamsic Formation just southeast of the Ordovician–Silurian Ellisville Granodiorite pluton tail. The following three clusters of shallow (<3 km) aftershocks illuminate other faults. (1) An elongate cluster of early aftershocks, ~10 km east of the Quail fault zone, extends 8 km from Fredericks Hall, strikes ~035°–039°, and appears to be roughly vertical. The Fredericks Hall fault may be a strand or splay of the older Lakeside fault zone, which to the south spans a width of several kilometers. (2) A cluster of later aftershocks ~3 km northeast of Cuckoo delineates a fault near the eastern contact of the Ordovician Quantico Formation. (3) An elongate cluster of late aftershocks ~1 km northwest of the Quail fault zone aftershock cluster delineates the northwest fault (described herein), which is temporally distinct, dips more steeply, and has a more northeastward strike. Some aftershock-illuminated faults coincide with preexisting units or structures evident from radiometric anomalies, suggesting tectonic inheritance or reactivation.
-
Crone, A.J.; De Martini, P. M.; Machette, M.M.; Okumura, K.; Prescott, J.R.
2003-01-01
Paleoseismic studies of two historically aseismic Quaternary faults in Australia confirm that cratonic faults in stable continental regions (SCR) typically have a long-term behavior characterized by episodes of activity separated by quiescent intervals of at least 10,000 and commonly 100,000 years or more. Studies of the approximately 30-km-long Roopena fault in South Australia and the approximately 30-km-long Hyden fault in Western Australia document multiple Quaternary surface-faulting events that are unevenly spaced in time. The episodic clustering of events on cratonic SCR faults may be related to temporal fluctuations of fault-zone fluid pore pressures in a volume of strained crust. The long-term slip rate on cratonic SCR faults is extremely low, so the geomorphic expression of many cratonic SCR faults is subtle, and scarps may be difficult to detect because they are poorly preserved. Both the Roopena and Hyden faults are in areas of limited or no significant seismicity; these and other faults that we have studied indicate that many potentially hazardous SCR faults cannot be recognized solely on the basis of instrumental data or historical earthquakes. Although cratonic SCR faults may appear to be nonhazardous because they have been historically aseismic, those that are favorably oriented for movement in the current stress field can and have produced unexpected damaging earthquakes. Paleoseismic studies of modern and prehistoric SCR faulting events provide the basis for understanding of the long-term behavior of these faults and ultimately contribute to better seismic-hazard assessments.
-
Barnhart, W. D.; Briggs, R.
2015-12-01
Geodetic imaging techniques enable researchers to "see" details of fault rupture that cannot be captured by complementary tools such as seismology and field studies, thus providing increasingly detailed information about surface strain, slip kinematics, and how an earthquake may be transcribed into the geological record. For example, the recent Haiti, Sierra El Mayor, and Nepal earthquakes illustrate the fundamental role of geodetic observations in recording blind ruptures where purely geological and seismological studies provided incomplete views of rupture kinematics. Traditional earthquake hazard analyses typically rely on sparse paleoseismic observations and incomplete mapping, simple assumptions of slip kinematics from Andersonian faulting, and earthquake analogs to characterize the probabilities of forthcoming ruptures and the severity of ground accelerations. Spatially dense geodetic observations in turn help to identify where these prevailing assumptions regarding fault behavior break down and highlight new and unexpected kinematic slip behavior. Here, we focus on three key contributions of space geodetic observations to the analysis of co-seismic deformation: identifying near-surface co-seismic slip where no easily recognized fault rupture exists; discerning non-Andersonian faulting styles; and quantifying distributed, off-fault deformation. The 2013 Balochistan strike slip earthquake in Pakistan illuminates how space geodesy precisely images non-Andersonian behavior and off-fault deformation. Through analysis of high-resolution optical imagery and DEMs, evidence emerges that a single fault map slip as both a strike slip and dip slip fault across multiple seismic cycles. These observations likewise enable us to quantify on-fault deformation, which account for ~72% of the displacements in this earthquake. Nonetheless, the spatial distribution of on- and off-fault deformation in this event is highly spatially variable- a complicating factor for comparisons
-
Pinar, Ali; Coskun, Zeynep; Mert, Aydin; Kalafat, Dogan
2015-04-01
The general consensus based on historical earthquake data point out that the last major moment release on the Prince's islands fault was in 1766 which in turn signals an increased seismic risk for Istanbul Metropolitan area considering the fact that most of the 20 mm/yr GPS derived slip rate for the region is accommodated mostly by that fault segment. The orientation of the Prince's islands fault segment overlaps with the NW-SE direction of the maximum principle stress axis derived from the focal mechanism solutions of the large and moderate sized earthquakes occurred in the Marmara region. As such, the NW-SE trending fault segment translates the motion between the two E-W trending branches of the North Anatolian fault zone; one extending from the Gulf of Izmit towards Çınarcık basin and the other extending between offshore Bakırköy and Silivri. The basic relation between the orientation of the maximum and minimum principal stress axes, the shear and normal stresses, and the orientation of a fault provides clue on the strength of a fault, i.e., its frictional coefficient. Here, the angle between the fault normal and maximum compressive stress axis is a key parameter where fault normal and fault parallel maximum compressive stress might be a necessary and sufficient condition for a creeping event. That relation also implies that when the trend of the sigma-1 axis is close to the strike of the fault the shear stress acting on the fault plane approaches zero. On the other hand, the ratio between the shear and normal stresses acting on a fault plane is proportional to the coefficient of frictional coefficient of the fault. Accordingly, the geometry between the Prince's islands fault segment and a maximum principal stress axis matches a weak fault model. In the frame of the presentation we analyze seismological data acquired in Marmara region and interpret the results in conjuction with the above mentioned weak fault model.
-
Distribution network fault section identification and fault location using artificial neural network
DEFF Research Database (Denmark)
Dashtdar, Masoud; Dashti, Rahman; Shaker, Hamid Reza
2018-01-01
In this paper, a method for fault location in power distribution network is presented. The proposed method uses artificial neural network. In order to train the neural network, a series of specific characteristic are extracted from the recorded fault signals in relay. These characteristics...... components of the sequences as well as three-phase signals could be obtained using statistics to extract the hidden features inside them and present them separately to train the neural network. Also, since the obtained inputs for the training of the neural network strongly depend on the fault angle, fault...... resistance, and fault location, the training data should be selected such that these differences are properly presented so that the neural network does not face any issues for identification. Therefore, selecting the signal processing function, data spectrum and subsequently, statistical parameters...
-
Loading of the San Andreas fault by flood-induced rupture of faults beneath the Salton Sea
Brothers, Daniel; Kilb, Debi; Luttrell, Karen; Driscoll, Neal W.; Kent, Graham
2011-01-01
The southern San Andreas fault has not experienced a large earthquake for approximately 300 years, yet the previous five earthquakes occurred at ~180-year intervals. Large strike-slip faults are often segmented by lateral stepover zones. Movement on smaller faults within a stepover zone could perturb the main fault segments and potentially trigger a large earthquake. The southern San Andreas fault terminates in an extensional stepover zone beneath the Salton Sea—a lake that has experienced periodic flooding and desiccation since the late Holocene. Here we reconstruct the magnitude and timing of fault activity beneath the Salton Sea over several earthquake cycles. We observe coincident timing between flooding events, stepover fault displacement and ruptures on the San Andreas fault. Using Coulomb stress models, we show that the combined effect of lake loading, stepover fault movement and increased pore pressure could increase stress on the southern San Andreas fault to levels sufficient to induce failure. We conclude that rupture of the stepover faults, caused by periodic flooding of the palaeo-Salton Sea and by tectonic forcing, had the potential to trigger earthquake rupture on the southern San Andreas fault. Extensional stepover zones are highly susceptible to rapid stress loading and thus the Salton Sea may be a nucleation point for large ruptures on the southern San Andreas fault.
-
Fault Detection for Industrial Processes
Directory of Open Access Journals (Sweden)
Yingwei Zhang
2012-01-01
Full Text Available A new fault-relevant KPCA algorithm is proposed. Then the fault detection approach is proposed based on the fault-relevant KPCA algorithm. The proposed method further decomposes both the KPCA principal space and residual space into two subspaces. Compared with traditional statistical techniques, the fault subspace is separated based on the fault-relevant influence. This method can find fault-relevant principal directions and principal components of systematic subspace and residual subspace for process monitoring. The proposed monitoring approach is applied to Tennessee Eastman process and penicillin fermentation process. The simulation results show the effectiveness of the proposed method.
-
Heege, J.H. ter; Wassing, B.B.T.; Giger, S.B.; Clennell, M.B.
2009-01-01
Existing fault seal algorithms are based on fault zone composition and fault slip (e.g., shale gouge ratio), or on fault orientations within the contemporary stress field (e.g., slip tendency). In this study, we aim to develop improved fault seal algorithms that account for differences in fault zone
-
The mechanics of fault-bend folding and tear-fault systems in the Niger Delta
Benesh, Nathan Philip
This dissertation investigates the mechanics of fault-bend folding using the discrete element method (DEM) and explores the nature of tear-fault systems in the deep-water Niger Delta fold-and-thrust belt. In Chapter 1, we employ the DEM to investigate the development of growth structures in anticlinal fault-bend folds. This work was inspired by observations that growth strata in active folds show a pronounced upward decrease in bed dip, in contrast to traditional kinematic fault-bend fold models. Our analysis shows that the modeled folds grow largely by parallel folding as specified by the kinematic theory; however, the process of folding over a broad axial surface zone yields a component of fold growth by limb rotation that is consistent with the patterns observed in natural folds. This result has important implications for how growth structures can he used to constrain slip and paleo-earthquake ages on active blind-thrust faults. In Chapter 2, we expand our DEM study to investigate the development of a wider range of fault-bend folds. We examine the influence of mechanical stratigraphy and quantitatively compare our models with the relationships between fold and fault shape prescribed by the kinematic theory. While the synclinal fault-bend models closely match the kinematic theory, the modeled anticlinal fault-bend folds show robust behavior that is distinct from the kinematic theory. Specifically, we observe that modeled structures maintain a linear relationship between fold shape (gamma) and fault-horizon cutoff angle (theta), rather than expressing the non-linear relationship with two distinct modes of anticlinal folding that is prescribed by the kinematic theory. These observations lead to a revised quantitative relationship for fault-bend folds that can serve as a useful interpretation tool. Finally, in Chapter 3, we examine the 3D relationships of tear- and thrust-fault systems in the western, deep-water Niger Delta. Using 3D seismic reflection data and new
-
International Nuclear Information System (INIS)
Schermer, E.R.; Van Dissen, R.; Berryman, K.R.; Kelsey, H.M.; Cashman, S.M.
2004-01-01
Active faulting in the upper plate of the Hikurangi subduction zone, North Island, New Zealand, represents a significant seismic hazard that is not yet well understood. In northern Wairarapa, the geometry and kinematics of active faults, and the Quaternary and historical surface-rupture record, have not previously been studied in detail. We present the results of mapping and paleoseismicity studies on faults in the northern Wairarapa region to document the characteristics of active faults and the timing of earthquakes. We focus on evidence for surface rupture in the 1855 Wairarapa (M w 8.2) and 1934 Pahiatua (M w 7.4) earthquakes, two of New Zealand's largest historical earthquakes. The Dreyers Rock, Alfredton, Saunders Road, Waitawhiti, and Waipukaka faults form a northeast-trending, east-stepping array of faults. Detailed mapping of offset geomorphic features shows the rupture lengths vary from c. 7 to 20 km and single-event displacements range from 3 to 7 m, suggesting the faults are capable of generating M >7 earthquakes. Trenching results show that two earthquakes have occurred on the Alfredton Fault since c. 2900 cal. BP. The most recent event probably occurred during the 1855 Wairarapa earthquake as slip propagated northward from the Wairarapa Fault and across a 6 km wide step. Waipukaka Fault trenches show that at least three surface-rupturing earthquakes have occurred since 8290-7880 cal. BP. Analysis of stratigraphic and historical evidence suggests the most recent rupture occurred during the 1934 Pahiatua earthquake. Estimates of slip rates provided by these data suggest that a larger component of strike slip than previously suspected is occurring within the upper plate and that the faults accommodate a significant proportion of the dextral component of oblique subduction. Assessment of seismic hazard is difficult because the known fault scarp lengths appear too short to have accommodated the estimated single-event displacements. Faults in the region are
-
Ding, Bo; Fang, Huajing
2017-05-01
This paper is concerned with the fault prediction for the nonlinear stochastic system with incipient faults. Based on the particle filter and the reasonable assumption about the incipient faults, the modified fault estimation algorithm is proposed, and the system state is estimated simultaneously. According to the modified fault estimation, an intuitive fault detection strategy is introduced. Once each of the incipient fault is detected, the parameters of which are identified by a nonlinear regression method. Then, based on the estimated parameters, the future fault signal can be predicted. Finally, the effectiveness of the proposed method is verified by the simulations of the Three-tank system. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.
-
Yates, Amy M.; Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Gonzalez, Oscar R.; Gray, W. Steven
2010-01-01
Safety-critical distributed flight control systems require robustness in the presence of faults. In general, these systems consist of a number of input/output (I/O) and computation nodes interacting through a fault-tolerant data communication system. The communication system transfers sensor data and control commands and can handle most faults under typical operating conditions. However, the performance of the closed-loop system can be adversely affected as a result of operating in harsh environments. In particular, High-Intensity Radiated Field (HIRF) environments have the potential to cause random fault manifestations in individual avionic components and to generate simultaneous system-wide communication faults that overwhelm existing fault management mechanisms. This paper presents the design of an experiment conducted at the NASA Langley Research Center's HIRF Laboratory to statistically characterize the faults that a HIRF environment can trigger on a single node of a distributed flight control system.
-
Energy Technology Data Exchange (ETDEWEB)
Cheung, Howard [Purdue Univ., West Lafayette, IN (United States); Braun, James E. [Purdue Univ., West Lafayette, IN (United States)
2015-12-31
This report describes models of building faults created for OpenStudio to support the ongoing development of fault detection and diagnostic (FDD) algorithms at the National Renewable Energy Laboratory. Building faults are operating abnormalities that degrade building performance, such as using more energy than normal operation, failing to maintain building temperatures according to the thermostat set points, etc. Models of building faults in OpenStudio can be used to estimate fault impacts on building performance and to develop and evaluate FDD algorithms. The aim of the project is to develop fault models of typical heating, ventilating and air conditioning (HVAC) equipment in the United States, and the fault models in this report are grouped as control faults, sensor faults, packaged and split air conditioner faults, water-cooled chiller faults, and other uncategorized faults. The control fault models simulate impacts of inappropriate thermostat control schemes such as an incorrect thermostat set point in unoccupied hours and manual changes of thermostat set point due to extreme outside temperature. Sensor fault models focus on the modeling of sensor biases including economizer relative humidity sensor bias, supply air temperature sensor bias, and water circuit temperature sensor bias. Packaged and split air conditioner fault models simulate refrigerant undercharging, condenser fouling, condenser fan motor efficiency degradation, non-condensable entrainment in refrigerant, and liquid line restriction. Other fault models that are uncategorized include duct fouling, excessive infiltration into the building, and blower and pump motor degradation.
-
Directory of Open Access Journals (Sweden)
Lia Martins Costa do Amaral
2012-12-01
Full Text Available La gran disponibilidad de vapor de agua en los niveles inferiores de la atmósfera, advectada sobre la costa de la provincia de Santa Catarina por el anticiclón semiestacionario del Océano Atlántico, favoreció períodos frecuentes de lluvia durante el mes de noviembre de 2008. La exploración del evento extremo ocurrido en Santa Catarina, que se caracterizó por un intenso bloqueo en niveles altos, se realizó con pronósticos de los modelos del mesoescala MM5 y WRF. Estos modelos fueron procesados con muy alta resolución espacial, abarcando toda la región afectada por el evento severo. La temperatura de la superficie del mar presentaba anomalías positivas de temperatura a lo largo de la costa de Santa Catarina, favoreciendo la transferencia de calor latente hacia la atmósfera, con su posterior advección hacia la zona continental. Los resultados obtenidos con los modelos son consistentes con las observaciones, aunque fuertemente dependientes de la resolución horizontal de los mismos.The large availability of water vapor at low levels of the atmosphere, advected into the coastal region of Santa Catharina State by the Atlantic Ocean semi-stationary anticyclone, provided the frequent and copious rainfall during the November, 2008. One of the most extreme event occurred in Santa Catharina coastal zone, when a quite strong blocking formed at high levels of the atmosphere is explored processing both, the MM5 and WRF mesoscale models. These models were processed with very high spatial resolution domains, covering the entire region affected by the severe event. The sea surface temperature field revealed that there was a large core on Atlantic waters with quite high temperatures along the coast of Santa Catharina, which enhanced the vertical integrated latent heat supply into the continental region by the winds. The models forecasting results showed consistent results with the observations, as well as an indication that coherences are directly
-
Absolute age determination of quaternary faults
International Nuclear Information System (INIS)
Cheong, Chang Sik; Lee, Seok Hoon; Choi, Man Sik
2000-03-01
To constrain the age of neotectonic fault movement, Rb-Sr, K-Ar, U-series disequilibrium, C-14 and Be-10 methods were applied to the fault gouges, fracture infillings and sediments from the Malbang, Ipsil, Wonwonsa faults faults in the Ulsan fault zone, Yangsan fault in the Yeongdeog area and southeastern coastal area. Rb-Sr and K-Ar data imply that the fault movement of the Ulan fault zone initiated at around 30 Ma and preliminary dating result for the Yang san fault is around 70 Ma in the Yeongdeog area. K-Ar and U-series disequilibrium dating results for fracture infillings in the Ipsil fault are consistent with reported ESR ages. Radiocarbon ages of quaternary sediments from the Jeongjari area are discordant with stratigraphic sequence. Carbon isotope data indicate a difference of sedimentry environment for those samples. Be-10 dating results for the Suryum fault area are consistent with reported OSL results
-
Absolute age determination of quaternary faults
Energy Technology Data Exchange (ETDEWEB)
Cheong, Chang Sik; Lee, Seok Hoon; Choi, Man Sik [Korea Basic Science Institute, Seoul (Korea, Republic of)] (and others)
2000-03-15
To constrain the age of neotectonic fault movement, Rb-Sr, K-Ar, U-series disequilibrium, C-14 and Be-10 methods were applied to the fault gouges, fracture infillings and sediments from the Malbang, Ipsil, Wonwonsa faults faults in the Ulsan fault zone, Yangsan fault in the Yeongdeog area and southeastern coastal area. Rb-Sr and K-Ar data imply that the fault movement of the Ulan fault zone initiated at around 30 Ma and preliminary dating result for the Yang san fault is around 70 Ma in the Yeongdeog area. K-Ar and U-series disequilibrium dating results for fracture infillings in the Ipsil fault are consistent with reported ESR ages. Radiocarbon ages of quaternary sediments from the Jeongjari area are discordant with stratigraphic sequence. Carbon isotope data indicate a difference of sedimentry environment for those samples. Be-10 dating results for the Suryum fault area are consistent with reported OSL results.
-
International Nuclear Information System (INIS)
Lee, Hee Kwon
2002-03-01
Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then trow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected from the Yangsan fault system. ESR dates from the this fault system range from 870 to 240 ka. Results of this research suggest that long-term cyclic fault activity continued into the pleistocene
-
Energy Technology Data Exchange (ETDEWEB)
Lee, Hee Kwon [Kangwon National Univ., Chuncheon (Korea, Republic of)
2002-03-15
Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then trow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected from the Yangsan fault system. ESR dates from the this fault system range from 870 to 240 ka. Results of this research suggest that long-term cyclic fault activity continued into the pleistocene.
-
Spatiotemporal patterns of fault slip rates across the Central Sierra Nevada frontal fault zone
Rood, Dylan H.; Burbank, Douglas W.; Finkel, Robert C.
2011-01-01
Patterns in fault slip rates through time and space are examined across the transition from the Sierra Nevada to the Eastern California Shear Zone-Walker Lane belt. At each of four sites along the eastern Sierra Nevada frontal fault zone between 38 and 39° N latitude, geomorphic markers, such as glacial moraines and outwash terraces, are displaced by a suite of range-front normal faults. Using geomorphic mapping, surveying, and 10Be surface exposure dating, mean fault slip rates are defined, and by utilizing markers of different ages (generally, ~ 20 ka and ~ 150 ka), rates through time and interactions among multiple faults are examined over 10 4-10 5 year timescales. At each site for which data are available for the last ~ 150 ky, mean slip rates across the Sierra Nevada frontal fault zone have probably not varied by more than a factor of two over time spans equal to half of the total time interval (~ 20 ky and ~ 150 ky timescales): 0.3 ± 0.1 mm year - 1 (mode and 95% CI) at both Buckeye Creek in the Bridgeport basin and Sonora Junction; and 0.4 + 0.3/-0.1 mm year - 1 along the West Fork of the Carson River at Woodfords. Data permit rates that are relatively constant over the time scales examined. In contrast, slip rates are highly variable in space over the last ~ 20 ky. Slip rates decrease by a factor of 3-5 northward over a distance of ~ 20 km between the northern Mono Basin (1.3 + 0.6/-0.3 mm year - 1 at Lundy Canyon site) to the Bridgeport Basin (0.3 ± 0.1 mm year - 1 ). The 3-fold decrease in the slip rate on the Sierra Nevada frontal fault zone northward from Mono Basin is indicative of a change in the character of faulting north of the Mina Deflection as extension is transferred eastward onto normal faults between the Sierra Nevada and Walker Lane belt. A compilation of regional deformation rates reveals that the spatial pattern of extension rates changes along strike of the Eastern California Shear Zone-Walker Lane belt. South of the Mina Deflection
-
Geophysical Imaging of Fault Structures Over the Qadimah Fault, Saudi Arabia
AlTawash, Feras
2011-06-01
The purpose of this study is to use geophysical imaging methods to identify the conjectured location of the ‘Qadimah fault’ near the ‘King Abdullah Economic City’, Saudi Arabia. Towards this goal, 2-D resistivity and seismic surveys were conducted at two different locations, site 1 and site 2, along the proposed trace of the ‘Qadimah fault’. Three processing techniques were used to validate the fault (i) 2-D travel time tomography, (ii) resistivity imaging, and (iii) reflection trim stacking. The refraction traveltime tomograms at site 1 and site 2 both show low-velocity zones (LVZ’s) next to the conjectured fault trace. These LVZ’s are interpreted as colluvial wedges that are often observed on the downthrown side of normal faults. The resistivity tomograms are consistent with this interpretation in that there is a significant change in resistivity values along the conjectured fault trace. Processing the reflection data did not clearly reveal the existence of a fault, and is partly due to the sub-optimal design of the reflection experiment. Overall, the results of this study strongly, but not definitively, suggest the existence of the Qadimah fault in the ‘King Abdullah Economic City’ region of Saudi Arabia.
-
Salvini, Francesco; Storti, Fabrizio
2001-01-01
In fault-related folds that form by axial surface migration, rocks undergo deformation as they pass through axial surfaces. The distribution and intensity of deformation in these structures has been impacted by the history of axial surface migration. Upon fold initiation, unique dip panels develop, each with a characteristic deformation intensity, depending on their history. During fold growth, rocks that pass through axial surfaces are transported between dip panels and accumulate additional deformation. By tracking the pattern of axial surface migration in model folds, we predict the distribution of relative deformation intensity in simple-step, parallel fault-bend and fault-propagation anticlines. In both cases the deformation is partitioned into unique domains we call deformation panels. For a given rheology of the folded multilayer, deformation intensity will be homogeneously distributed in each deformation panel. Fold limbs are always deformed. The flat crests of fault-propagation anticlines are always undeformed. Two asymmetric deformation panels develop in fault-propagation folds above ramp angles exceeding 29°. For lower ramp angles, an additional, more intensely-deformed panel develops at the transition between the crest and the forelimb. Deformation in the flat crests of fault-bend anticlines occurs when fault displacement exceeds the length of the footwall ramp, but is never found immediately hinterland of the crest to forelimb transition. In environments dominated by brittle deformation, our models may serve as a first-order approximation of the distribution of fractures in fault-related folds.
-
Fault isolatability conditions for linear systems
DEFF Research Database (Denmark)
Stoustrup, Jakob; Niemann, Henrik
2006-01-01
In this paper, we shall show that an unlimited number of additive single faults can be isolated under mild conditions if a general isolation scheme is applied. Multiple faults are also covered. The approach is algebraic and is based on a set representation of faults, where all faults within a set...... the faults have occurred. The last step is a fault isolation (FI) of the faults occurring in a specific fault set, i.e. equivalent with the standard FI step. A simple example demonstrates how to turn the algebraic necessary and sufficient conditions into explicit algorithms for designing filter banks, which...
-
Fault Current Distribution and Pole Earth Potential Rise (EPR) Under Substation Fault
Nnassereddine, M.; Rizk, J.; Hellany, A.; Nagrial, M.
2013-09-01
New high-voltage (HV) substations are fed by transmission lines. The position of these lines necessitates earthing design to ensure safety compliance of the system. Conductive structures such as steel or concrete poles are widely used in HV transmission mains. The earth potential rise (EPR) generated by a fault at the substation could result in an unsafe condition. This article discusses EPR based on substation fault. The pole EPR assessment under substation fault is assessed with and without mutual impedance consideration. Split factor determination with and without the mutual impedance of the line is also discussed. Furthermore, a simplified formula to compute the pole grid current under substation fault is included. Also, it includes the introduction of the n factor which determines the number of poles that required earthing assessments under substation fault. A case study is shown.
-
Directory of Open Access Journals (Sweden)
Márcio Paim Mariot
2008-04-01
Full Text Available Maytenus ilicifolia e M. aquifolium são espécies nativas do Brasil, popularmente conhecidas como espinheira-santa, sendo indicadas para gastrite e para úlcera estomacal. A Embrapa Clima Temperado e a Universidade Federal de Pelotas (UFPel mantêm um banco de germoplasma destas espécies. Com o objetivo de identificar a variabilidade fenotípica para alguns caracteres morfológicos em matrizes de espinheira-santa, estimar a dissimilaridade e agrupar os acessos através de análises multivariadas, 105 acessos foram caracterizados morfologicamente. Foram avaliados os caracteres comprimento e largura de fruto, número de sementes por fruto, comprimento e largura de folha, relação comprimento/largura de folha e número de espinhos por folha. Foi estimada a distância euclidiana e os acessos foram agrupados pelo método de otimização de Tocher. Foi observada uma ampla variabilidade para todos os caracteres analisados. O número de espinhos por folha foi o caráter que mais contribuiu para a divergência. Os caracteres morfológicos permitiram separar os acessos em sete grupos. A maior dissimilaridade foi entre os acessos 57 (M. ilicifolia e 91 (M. aquifolium. Não foi evidenciada uma separação de acordo com a localização geográfica dos acessos. Na análise de agrupamento foram identificados dois grupos que apresentavam tanto acessos de M. ilicifolia quanto de M. aquifolium, o que indica proximidade filogenética entre estas espécies.Maytenus ilicifolia and M. aquifolium are native Brazilian species popularly known as espinheira-santa, being indicated for gastritis and stomach ulcer. Embrapa Clima Temperado and Universidade Federal de Pelotas (UFPel keep a gene bank of these species. With the objective of identifing phenotypic variability for some morphological characters in matrices of espinheira-santa, estimating dissimilarity and clustering accessions through multivariate analysis, 105 accessions had been morphologically characterized
-
Islas de Old Providence y Santa Catalina. Presente y futuro
Directory of Open Access Journals (Sweden)
June Marie Mow
2005-11-01
Full Text Available Las Islas de Providencia y Santa Catalina ofrecen una combinación única de diversidad biológica y autenticidad cultural, convirtiéndose en las Islas menos degradadas ambiental y culturalmente en el Caribe; son áreas naturales, con bajos niveles de turismo, relativamente intactas en las cuales la comunidad isleña nativa local juega un papel significativo. La falta de una marca como destino turístico único nacional e internacionalmente, la baja conectividad, la carencia de una estrategia promocional, así como la baja importancia del sector para el gobierno local, brindan la oportunidad para que el ecoturismo trabaje para la gente de Old Providence y Santa Catalina bajo sus propias reglas de juego y que la voluntad política no sea desviada por ganancias de corto plazo o esquemas superficialmente muy atractivos, pero que no generan beneficios para la población local. La visión de la gente de Old Providence y Santa Catalina es que, sea el ecoturismo la forma de ofrecer nuevas opciones socioeconómicas a las poblaciones locales para que puedan obtener los beneficios de sus senderos, playas, arrecifes y áreas naturales, la tradición, y cultura local. Para ello, es posible aprovechar de manera sostenible la introducción de un nuevo paradigma para el desarrollo sostenible de Old Providence y Santa Catalina: La Reserva de Biosfera Seaflower.
-
Performance based fault diagnosis
DEFF Research Database (Denmark)
Niemann, Hans Henrik
2002-01-01
Different aspects of fault detection and fault isolation in closed-loop systems are considered. It is shown that using the standard setup known from feedback control, it is possible to formulate fault diagnosis problems based on a performance index in this general standard setup. It is also shown...
-
Deformation associated with continental normal faults
Resor, Phillip G.
Deformation associated with normal fault earthquakes and geologic structures provide insights into the seismic cycle as it unfolds over time scales from seconds to millions of years. Improved understanding of normal faulting will lead to more accurate seismic hazard assessments and prediction of associated structures. High-precision aftershock locations for the 1995 Kozani-Grevena earthquake (Mw 6.5), Greece image a segmented master fault and antithetic faults. This three-dimensional fault geometry is typical of normal fault systems mapped from outcrop or interpreted from reflection seismic data and illustrates the importance of incorporating three-dimensional fault geometry in mechanical models. Subsurface fault slip associated with the Kozani-Grevena and 1999 Hector Mine (Mw 7.1) earthquakes is modeled using a new method for slip inversion on three-dimensional fault surfaces. Incorporation of three-dimensional fault geometry improves the fit to the geodetic data while honoring aftershock distributions and surface ruptures. GPS Surveying of deformed bedding surfaces associated with normal faulting in the western Grand Canyon reveals patterns of deformation that are similar to those observed by interferometric satellite radar interferometry (InSAR) for the Kozani Grevena earthquake with a prominent down-warp in the hanging wall and a lesser up-warp in the footwall. However, deformation associated with the Kozani-Grevena earthquake extends ˜20 km from the fault surface trace, while the folds in the western Grand Canyon only extend 500 m into the footwall and 1500 m into the hanging wall. A comparison of mechanical and kinematic models illustrates advantages of mechanical models in exploring normal faulting processes including incorporation of both deformation and causative forces, and the opportunity to incorporate more complex fault geometry and constitutive properties. Elastic models with antithetic or synthetic faults or joints in association with a master
-
Characterization of leaky faults
International Nuclear Information System (INIS)
Shan, Chao.
1990-05-01
Leaky faults provide a flow path for fluids to move underground. It is very important to characterize such faults in various engineering projects. The purpose of this work is to develop mathematical solutions for this characterization. The flow of water in an aquifer system and the flow of air in the unsaturated fault-rock system were studied. If the leaky fault cuts through two aquifers, characterization of the fault can be achieved by pumping water from one of the aquifers, which are assumed to be horizontal and of uniform thickness. Analytical solutions have been developed for two cases of either a negligibly small or a significantly large drawdown in the unpumped aquifer. Some practical methods for using these solutions are presented. 45 refs., 72 figs., 11 tabs
-
International Nuclear Information System (INIS)
Arnold, Bill Walter; Roberts, Barry L.; McKenna, Sean Andrew; Coburn, Timothy C.
2004-01-01
Preliminary investigation areas (PIA) for a potential repository of high-level radioactive waste must be evaluated by NUMO with regard to a number of qualifying factors. One of these factors is related to earthquakes and fault activity. This study develops a spatial statistical assessment method that can be applied to the active faults in Japan to perform such screening evaluations. This analysis uses the distribution of seismicity near faults to define the width of the associated process zone. This concept is based on previous observations of aftershock earthquakes clustered near active faults and on the assumption that such seismic activity is indicative of fracturing and associated impacts on bedrock integrity. Preliminary analyses of aggregate data for all of Japan confirmed that the frequency of earthquakes is higher near active faults. Data used in the analysis were obtained from NUMO and consist of three primary sources: (1) active fault attributes compiled in a spreadsheet, (2) earthquake hypocenter data, and (3) active fault locations. Examination of these data revealed several limitations with regard to the ability to associate fault attributes from the spreadsheet to locations of individual fault trace segments. In particular, there was no direct link between attributes of the active faults in the spreadsheet and the active fault locations in the GIS database. In addition, the hypocenter location resolution in the pre-1983 data was less accurate than for later data. These pre-1983 hypocenters were eliminated from further analysis
-
Energy Technology Data Exchange (ETDEWEB)
Arnold, Bill Walter; Roberts, Barry L.; McKenna, Sean Andrew; Coburn, Timothy C. (Abilene Christian University, Abilene, TX)
2004-09-01
Preliminary investigation areas (PIA) for a potential repository of high-level radioactive waste must be evaluated by NUMO with regard to a number of qualifying factors. One of these factors is related to earthquakes and fault activity. This study develops a spatial statistical assessment method that can be applied to the active faults in Japan to perform such screening evaluations. This analysis uses the distribution of seismicity near faults to define the width of the associated process zone. This concept is based on previous observations of aftershock earthquakes clustered near active faults and on the assumption that such seismic activity is indicative of fracturing and associated impacts on bedrock integrity. Preliminary analyses of aggregate data for all of Japan confirmed that the frequency of earthquakes is higher near active faults. Data used in the analysis were obtained from NUMO and consist of three primary sources: (1) active fault attributes compiled in a spreadsheet, (2) earthquake hypocenter data, and (3) active fault locations. Examination of these data revealed several limitations with regard to the ability to associate fault attributes from the spreadsheet to locations of individual fault trace segments. In particular, there was no direct link between attributes of the active faults in the spreadsheet and the active fault locations in the GIS database. In addition, the hypocenter location resolution in the pre-1983 data was less accurate than for later data. These pre-1983 hypocenters were eliminated from further analysis.
-
Fault healing promotes high-frequency earthquakes in laboratory experiments and on natural faults
McLaskey, Gregory C.; Thomas, Amanda M.; Glaser, Steven D.; Nadeau, Robert M.
2012-01-01
Faults strengthen or heal with time in stationary contact and this healing may be an essential ingredient for the generation of earthquakes. In the laboratory, healing is thought to be the result of thermally activated mechanisms that weld together micrometre-sized asperity contacts on the fault surface, but the relationship between laboratory measures of fault healing and the seismically observable properties of earthquakes is at present not well defined. Here we report on laboratory experiments and seismological observations that show how the spectral properties of earthquakes vary as a function of fault healing time. In the laboratory, we find that increased healing causes a disproportionately large amount of high-frequency seismic radiation to be produced during fault rupture. We observe a similar connection between earthquake spectra and recurrence time for repeating earthquake sequences on natural faults. Healing rates depend on pressure, temperature and mineralogy, so the connection between seismicity and healing may help to explain recent observations of large megathrust earthquakes which indicate that energetic, high-frequency seismic radiation originates from locations that are distinct from the geodetically inferred locations of large-amplitude fault slip
-
The morphology of strike-slip faults - Examples from the San Andreas Fault, California
Bilham, Roger; King, Geoffrey
1989-01-01
The dilatational strains associated with vertical faults embedded in a horizontal plate are examined in the framework of fault kinematics and simple displacement boundary conditions. Using boundary element methods, a sequence of examples of dilatational strain fields associated with commonly occurring strike-slip fault zone features (bends, offsets, finite rupture lengths, and nonuniform slip distributions) is derived. The combinations of these strain fields are then used to examine the Parkfield region of the San Andreas fault system in central California.
-
Directory of Open Access Journals (Sweden)
Olga Vikhireva
Full Text Available The SCORE scale predicts the 10-year risk of fatal atherosclerotic cardiovascular disease (CVD, based on conventional risk factors. The high-risk version of SCORE is recommended for Central and Eastern Europe and former Soviet Union (CEE/FSU, due to high CVD mortality rates in these countries. Given the pronounced social gradient in cardiovascular mortality in the region, it is important to consider social factors in the CVD risk prediction. We investigated whether adding education and marital status to SCORE benefits its prognostic performance in two sets of population-based CEE/FSU cohorts.The WHO MONICA (MONItoring of trends and determinants in CArdiovascular disease cohorts from the Czech Republic, Poland (Warsaw and Tarnobrzeg, Lithuania (Kaunas, and Russia (Novosibirsk were followed from the mid-1980s (577 atherosclerotic CVD deaths among 14,969 participants with non-missing data. The HAPIEE (Health, Alcohol, and Psychosocial factors In Eastern Europe study follows Czech, Polish (Krakow, and Russian (Novosibirsk cohorts from 2002-05 (395 atherosclerotic CVD deaths in 19,900 individuals with non-missing data.In MONICA and HAPIEE, the high-risk SCORE ≥5% at baseline strongly and significantly predicted fatal CVD both before and after adjustment for education and marital status. After controlling for SCORE, lower education and non-married status were significantly associated with CVD mortality in some samples. SCORE extension by these additional risk factors only slightly improved indices of calibration and discrimination (integrated discrimination improvement <5% in men and ≤1% in women.Extending SCORE by education and marital status failed to substantially improve its prognostic performance in population-based CEE/FSU cohorts.
-
Iowa State University GIS Support and Research Facility — This fault coverage locates and identifies all currently known/interpreted fault zones in Iowa, that demonstrate offset of geologic units in exposure or subsurface...
-
DEFF Research Database (Denmark)
Tabatabaeipour, Seyed Mojtaba; Bak, Thomas
2012-01-01
In this paper we consider the problem of fault estimation and accommodation for discrete time piecewise linear systems. A robust fault estimator is designed to estimate the fault such that the estimation error converges to zero and H∞ performance of the fault estimation is minimized. Then, the es...
-
FSN-based fault modelling for fault detection and troubleshooting in CANDU stations
Energy Technology Data Exchange (ETDEWEB)
Nasimi, E., E-mail: elnara.nasimi@brucepower.com [Bruce Power LLP., Tiverton, Ontario(Canada); Gabbar, H.A. [Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)
2013-07-01
An accurate fault modeling and troubleshooting methodology is required to aid in making risk-informed decisions related to design and operational activities of current and future generation of CANDU designs. This paper presents fault modeling approach using Fault Semantic Network (FSN) methodology with risk estimation. Its application is demonstrated using a case study of Bruce B zone-control level oscillations. (author)
-
Falcucci, E.; Gori, S.
2015-12-01
The 2009 L'Aquila earthquake (Mw 6.1), in central Italy, raised the issue of surface faulting hazard in Italy, since large urban areas were affected by surface displacement along the causative structure, the Paganica fault. Since then, guidelines for microzonation were drew up that take into consideration the problem of surface faulting in Italy, and laying the bases for future regulations about related hazard, similarly to other countries (e.g. USA). More specific guidelines on the management of areas affected by active and capable faults (i.e. able to produce surface faulting) are going to be released by National Department of Civil Protection; these would define zonation of areas affected by active and capable faults, with prescriptions for land use planning. As such, the guidelines arise the problem of the time interval and general operational criteria to asses fault capability for the Italian territory. As for the chronology, the review of the international literature and regulatory allowed Galadini et al. (2012) to propose different time intervals depending on the ongoing tectonic regime - compressive or extensional - which encompass the Quaternary. As for the operational criteria, the detailed analysis of the large amount of works dealing with active faulting in Italy shows that investigations exclusively based on surface morphological features (e.g. fault planes exposition) or on indirect investigations (geophysical data), are not sufficient or even unreliable to define the presence of an active and capable fault; instead, more accurate geological information on the Quaternary space-time evolution of the areas affected by such tectonic structures is needed. A test area for which active and capable faults can be first mapped based on such a classical but still effective methodological approach can be the central Apennines. Reference Galadini F., Falcucci E., Galli P., Giaccio B., Gori S., Messina P., Moro M., Saroli M., Scardia G., Sposato A. (2012). Time
-
Fault detection in finite frequency domain for Takagi-Sugeno fuzzy systems with sensor faults.
Li, Xiao-Jian; Yang, Guang-Hong
2014-08-01
This paper is concerned with the fault detection (FD) problem in finite frequency domain for continuous-time Takagi-Sugeno fuzzy systems with sensor faults. Some finite-frequency performance indices are initially introduced to measure the fault/reference input sensitivity and disturbance robustness. Based on these performance indices, an effective FD scheme is then presented such that the generated residual is designed to be sensitive to both fault and reference input for faulty cases, while robust against the reference input for fault-free case. As the additional reference input sensitivity for faulty cases is considered, it is shown that the proposed method improves the existing FD techniques and achieves a better FD performance. The theory is supported by simulation results related to the detection of sensor faults in a tunnel-diode circuit.
-
Fault detection for discrete-time switched systems with sensor stuck faults and servo inputs.
Zhong, Guang-Xin; Yang, Guang-Hong
2015-09-01
This paper addresses the fault detection problem of switched systems with servo inputs and sensor stuck faults. The attention is focused on designing a switching law and its associated fault detection filters (FDFs). The proposed switching law uses only the current states of FDFs, which guarantees the residuals are sensitive to the servo inputs with known frequency ranges in faulty cases and robust against them in fault-free case. Thus, the arbitrarily small sensor stuck faults, including outage faults can be detected in finite-frequency domain. The levels of sensitivity and robustness are measured in terms of the finite-frequency H- index and l2-gain. Finally, the switching law and FDFs are obtained by the solution of a convex optimization problem. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.
-
Late quaternary faulting along the Death Valley-Furnace Creek fault system, California and Nevada
International Nuclear Information System (INIS)
Brogan, G.E.; Kellogg, K.S.; Terhune, C.L.; Slemmons, D.B.
1991-01-01
The Death Valley-Furnace Creek fault system, in California and Nevada, has a variety of impressive late Quaternary neotectonic features that record a long history of recurrent earthquake-induced faulting. Although no neotectonic features of unequivocal historical age are known, paleoseismic features from multiple late Quaternary events of surface faulting are well developed throughout the length of the system. Comparison of scarp heights to amount of horizontal offset of stream channels and the relationships of both scarps and channels to the ages of different geomorphic surfaces demonstrate that Quaternary faulting along the northwest-trending Furnace Creek fault zone is predominantly right lateral, whereas that along the north-trending Death Valley fault zone is predominantly normal. These observations are compatible with tectonic models of Death Valley as a northwest- trending pull-apart basin
-
Characterization of the San Andreas Fault near Parkfield, California by fault-zone trapped waves
Li, Y.; Vidale, J.; Cochran, E.
2003-04-01
In October, 2002, coordinated by the Pre-EarthScope/SAFOD, we conducted an extensive seismic experiment at the San Andreas fault (SAF), Parkfield to record fault-zone trapped waves generated by explosions and microearthquakes using dense linear seismic arrays of 52 PASSCAL 3-channel REFTEKs deployed across and along the fault zone. We detonated 3 explosions within and out of the fault zone during the experiment, and also recorded other 13 shots of PASO experiment of UWM/RPI (Thurber and Roecker) detonated around the SAFOD drilling site at the same time. We observed prominent fault-zone trapped waves with large amplitudes and long duration following S waves at stations close to the main fault trace for sources located within and close to the fault zone. Dominant frequencies of trapped waves are 2-3 Hz for near-surface explosions and 4-5 Hz for microearthquakes. Fault-zone trapped waves are relatively weak on the north strand of SAF for same sources. In contrast, seismograms registered for both the stations and shots far away from the fault zone show a brief S wave and lack of trapped waves. These observations are consistent with previous findings of fault-zone trapped waves at the SAF [Li et al., 1990; 1997], indicating the existence of a well-developed low-velocity waveguide along the main fault strand (principal slip plan) of the SAF. The data from denser arrays and 3-D finite-difference simulations of fault-zone trapped waves allowed us to delineate the internal structure, segmentation and physical properties of the SAF with higher resolution. The trapped-wave inferred waveguide on the SAF Parkfield segment is ~150 m wide at surface and tapers to ~100 m at seismogenic depth, in which Q is 20-50 and S velocities are reduced by 30-40% from wall-rock velocities, with the greater velocity reduction at the shallow depth and to southeast of the 1966 M6 epicenter. We interpret this low-velocity waveguide on the SAF main strand as being the remnant of damage zone caused
-
Potential Applications of Manual Games,
1984-02-01
34 just because some electronic equipment is used to keep track of logistics, combat results, and force status. Even a highly computerized game like...D-A152 541 POTENTIAL APPLICATIONS OF MANUAL GAMES (U) RAND CORP ii SANTA MONICA CA T A BROW~N FEB 84 RAND/P-6957 UNCLASI7FIED F/G 12/2 N El..I 111 1...128 112.5 111 m; * _ 1.8 I1111 ’I’ll MICROCOPY RESOLUTION TEST CHART NATI NAl fii~ t1 RI 1A L4k, I POTENTIAL APPLICATIONS OF MANUJAL GAMES Lfl N Lfl
-
2010-04-01
... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Fault. 17.3 Section 17.3 Foreign Relations...) § 17.3 Fault. A recipient of an overpayment is without fault if he or she performed no act of... agency may have been at fault in initiating an overpayment will not necessarily relieve the individual...
-
Fault Diagnosis and Fault-tolerant Control of Modular Multi-level Converter High-voltage DC System
DEFF Research Database (Denmark)
Liu, Hui; Ma, Ke; Wang, Chao
2016-01-01
of failures and lower the reliability of the MMC-HVDC system. Therefore, research on the fault diagnosis and fault-tolerant control of MMC-HVDC system is of great significance in order to enhance the reliability of the system. This paper provides a comprehensive review of fault diagnosis and fault handling...
-
Desastre y Memoria Material: La Inundacion 2003 de Santa Fe, Argentina
Directory of Open Access Journals (Sweden)
Susann Baez Ullberg
2017-01-01
Full Text Available On April 29, 2003, a catastrophic flood occurred in the Argentina city of Santa Fe de la Vera Cruz. Soon, the disaster became a political issue, as they had made serious accusations against the authorities and decision makers regarding negligence, corruption and lack of disaster preparedness. A local protest movement emerged, claiming both the allocation of responsibilities and financial compensation for the losses suffered by the victims. This article analyses the role of material memory and oblivion on the post disaster scene, more specifically, how different social actors in Santa Fe used places and objects in the contentious making of a disaster memoryscape. The analysis is based on ethnography from transtemporal translocal and field research conducted in Santa Fe between 2004 and 2011, and applies anthropological and sociological theories of memory to analyse these processes. Resumen El 29 de abril de 2003, ocurrió la peor inundación catastrófica en la historia de la ciudad argentina de Santa Fe de la Vera Cruz. Al poco tiempo, el desastre se convirtió en una cuestión política, ya que se habían realizado graves acusaciones contra las autoridades y tomadores de decisiones con respecto a la negligencia, la corrupción y la falta de preparación para desastres. Surgió un movimiento de protesta demandando tanto la asignación de responsabilidades, como la compensación económica por las pérdidas sufridas por las víctimas. Este artículo analiza el papel de la memoria material y el olvido en el escenario del posdesastre, y más específicamente cómo los diferentes actores sociales en Santa Fe usaron los lugares y los objetos en una contienda por construir un memo-paisaje del desastre. El análisis se basa en etnografía de trabajo de campo translocal y transtemporal realizado en Santa Fe entre 2004 y 2011, y aplica las teorías antropológicas y sociológicas de la memoria a fines de analizar estos procesos.
-
Network Fault Diagnosis Using DSM
Institute of Scientific and Technical Information of China (English)
Jiang Hao; Yan Pu-liu; Chen Xiao; Wu Jing
2004-01-01
Difference similitude matrix (DSM) is effective in reducing information system with its higher reduction rate and higher validity. We use DSM method to analyze the fault data of computer networks and obtain the fault diagnosis rules. Through discretizing the relative value of fault data, we get the information system of the fault data. DSM method reduces the information system and gets the diagnosis rules. The simulation with the actual scenario shows that the fault diagnosis based on DSM can obtain few and effective rules.
-
Santa Monica, California 1/3 Arc-second NAVD 88 Coastal Digital Elevation Model
National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated...
-
Directory of Open Access Journals (Sweden)
Guo Hong
2015-10-01
Full Text Available This paper proposes a novel fault tolerant control with torque limitation based on the fault mode for the ten-phase permanent magnet synchronous motor (PMSM under various open-circuit and short-circuit fault conditions, which includes the optimal torque control and the torque limitation control based on the fault mode. The optimal torque control is adopted to guarantee the ripple-free electromagnetic torque operation for the ten-phase motor system under the post-fault condition. Furthermore, we systematically analyze the load capacity of the ten-phase motor system under different fault modes. And a torque limitation control approach based on the fault mode is proposed, which was not available earlier. This approach is able to ensure the safety operation of the faulted motor system in long operating time without causing the overheat fault. The simulation result confirms that the proposed fault tolerant control for the ten-phase motor system is able to guarantee the ripple-free electromagnetic torque and the safety operation in long operating time under the normal and fault conditions.
-
Metagenomes from two microbial consortia associated with Santa Barbara seep oil.
Hawley, Erik R; Malfatti, Stephanie A; Pagani, Ioanna; Huntemann, Marcel; Chen, Amy; Foster, Brian; Copeland, Alexander; del Rio, Tijana Glavina; Pati, Amrita; Jansson, Janet R; Gilbert, Jack A; Tringe, Susannah Green; Lorenson, Thomas D; Hess, Matthias
2014-12-01
The metagenomes from two microbial consortia associated with natural oils seeping into the Pacific Ocean offshore the coast of Santa Barbara (California, USA) were determined to complement already existing metagenomes generated from microbial communities associated with hydrocarbons that pollute the marine ecosystem. This genomics resource article is the first of two publications reporting a total of four new metagenomes from oils that seep into the Santa Barbara Channel. Copyright © 2014 Elsevier B.V. All rights reserved.
-
DEFF Research Database (Denmark)
Hansen, Søren Tranberg; Svenstrup, Mikael; Andersen, Hans Jørgen
2009-01-01
The video shows how an autonomous mobile robot dressed as Santa Claus is interacting with people in a shopping mall. The underlying hypothesis is that it is possible to create interesting new living spaces and induce value in terms of experiences, information or economics, by putting socially...... interactive mobile agents into public urban transit area. To investigate the hypothesis, an experiment was carried out using a robot capable of navigating autonomously based on the input of an onboard laser scanner. The robot would detect and follow random people, who afterwards were asked to fill out...
-
Fault tolerant computing systems
International Nuclear Information System (INIS)
Randell, B.
1981-01-01
Fault tolerance involves the provision of strategies for error detection damage assessment, fault treatment and error recovery. A survey is given of the different sorts of strategies used in highly reliable computing systems, together with an outline of recent research on the problems of providing fault tolerance in parallel and distributed computing systems. (orig.)
-
Bauer, Paul W.; Kelson, Keith I.; Grauch, V.J.S.; Drenth, Benjamin J.; Johnson, Peggy S.; Aby, Scott B.; Felix, Brigitte
2016-01-01
Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.
-
International Nuclear Information System (INIS)
Langridge, R.M.
2004-01-01
This report contains data from research undertaken by the author on the Hope Fault from 2000-2004. This report provides an opportunity to include data that was additional to or newer than work that was published in other places. New results from studies along the Hurunui section of the Hope Fault, additional to that published in Langridge and Berryman (2005) are presented here. This data includes tabulated data of fault location and description measurements, a graphical representation of this data in diagrammatic form along the length of the fault and new radiocarbon dates from the current EQC funded project. The new data show that the Hurunui section of the Hope Fault has the capability to yield further data on fault slip rate, earthquake displacements, and paleoseismicity. New results from studies at the Greenburn Stream paleoseismic site additional to that published in Langridge et al. (2003) are presented here. This includes a new log of the deepened west wall of Trench 2, a log of the west wall of Trench 1, and new radiocarbon dates from the second phase of dating undertaken at the Greenburn Stream site. The new data show that this site has the capability to yield further data on the paleoseismicity of the Conway segment of the Hope Fault. Through a detailed analysis of all three logged walls at the site and the new radiocarbon dates, it may, in combination with data from the nearby Clarence Reserve site of Pope (1994), be possible to develop a good record of the last 5 events on the Conway segment. (author). 12 refs., 12 figs
-
Diagnosis and Fault-tolerant Control
DEFF Research Database (Denmark)
Blanke, Mogens; Kinnaert, Michel; Lunze, Jan
the applicability of the presented methods. The theoretical results are illustrated by two running examples which are used throughout the book. The book addresses engineering students, engineers in industry and researchers who wish to get a survey over the variety of approaches to process diagnosis and fault......The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process...
-
Directory of Open Access Journals (Sweden)
Faqi Diao
2016-10-01
Full Text Available Strike-slip faults may be traced along thousands of kilometers, e.g., the San Andreas Fault (USA or the North Anatolian Fault (Turkey. A closer look at such continental-scale strike faults reveals localized complexities in fault geometry, associated with fault segmentation, secondary faults and a change of related hazards. The North Anatolian Fault displays such complexities nearby the mega city Istanbul, which is a place where earthquake risks are high, but secondary processes are not well understood. In this paper, long-term persistent scatterer interferometry (PSI analysis of synthetic aperture radar (SAR data time series was used to precisely identify the surface deformation pattern associated with the faulting complexity at the prominent bend of the North Anatolian Fault near Istanbul city. We elaborate the relevance of local faulting activity and estimate the fault status (slip rate and locking depth for the first time using satellite SAR interferometry (InSAR technology. The studied NW-SE-oriented fault on land is subject to strike-slip movement at a mean slip rate of ~5.0 mm/year and a shallow locking depth of <1.0 km and thought to be directly interacting with the main fault branch, with important implications for tectonic coupling. Our results provide the first geodetic evidence on the segmentation of a major crustal fault with a structural complexity and associated multi-hazards near the inhabited regions of Istanbul, with similarities also to other major strike-slip faults that display changes in fault traces and mechanisms.
-
2010-07-01
... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Fault. 29.522 Section 29.522 Money... Overpayments § 29.522 Fault. (a) General rule. A debtor is considered to be at fault if he or she, or any other... requirement. (3) The following factors may affect the decision as to whether the debtor is or is not at fault...
-
Heterogeneity in the Fault Damage Zone: a Field Study on the Borrego Fault, B.C., Mexico
Ostermeijer, G.; Mitchell, T. M.; Dorsey, M. T.; Browning, J.; Rockwell, T. K.; Aben, F. M.; Fletcher, J. M.; Brantut, N.
2017-12-01
The nature and distribution of damage around faults, and its impacts on fault zone properties has been a hot topic of research over the past decade. Understanding the mechanisms that control the formation of off fault damage can shed light on the processes during the seismic cycle, and the nature of fault zone development. Recent published work has identified three broad zones of damage around most faults based on the type, intensity, and extent of fracturing; Tip, Wall, and Linking damage. Although these zones are able to adequately characterise the general distribution of damage, little has been done to identify the nature of damage heterogeneity within those zones, often simplifying the distribution to fit log-normal linear decay trends. Here, we attempt to characterise the distribution of fractures that make up the wall damage around seismogenic faults. To do so, we investigate an extensive two dimensional fracture network exposed on a river cut platform along the Borrego Fault, BC, Mexico, 5m wide, and extending 20m from the fault core into the damage zone. High resolution fracture mapping of the outcrop, covering scales ranging three orders of magnitude (cm to m), has allowed for detailed observations of the 2D damage distribution within the fault damage zone. Damage profiles were obtained along several 1D transects perpendicular to the fault and micro-damage was examined from thin-sections at various locations around the outcrop for comparison. Analysis of the resulting fracture network indicates heterogeneities in damage intensity at decimetre scales resulting from a patchy distribution of high and low intensity corridors and clusters. Such patchiness may contribute to inconsistencies in damage zone widths defined along 1D transects and the observed variability of fracture densities around decay trends. How this distribution develops with fault maturity and the scaling of heterogeneities above and below the observed range will likely play a key role in
-
Remote triggering of fault-strength changes on the San Andreas fault at Parkfield.
Taira, Taka'aki; Silver, Paul G; Niu, Fenglin; Nadeau, Robert M
2009-10-01
Fault strength is a fundamental property of seismogenic zones, and its temporal changes can increase or decrease the likelihood of failure and the ultimate triggering of seismic events. Although changes in fault strength have been suggested to explain various phenomena, such as the remote triggering of seismicity, there has been no means of actually monitoring this important property in situ. Here we argue that approximately 20 years of observation (1987-2008) of the Parkfield area at the San Andreas fault have revealed a means of monitoring fault strength. We have identified two occasions where long-term changes in fault strength have been most probably induced remotely by large seismic events, namely the 2004 magnitude (M) 9.1 Sumatra-Andaman earthquake and the earlier 1992 M = 7.3 Landers earthquake. In both cases, the change possessed two manifestations: temporal variations in the properties of seismic scatterers-probably reflecting the stress-induced migration of fluids-and systematic temporal variations in the characteristics of repeating-earthquake sequences that are most consistent with changes in fault strength. In the case of the 1992 Landers earthquake, a period of reduced strength probably triggered the 1993 Parkfield aseismic transient as well as the accompanying cluster of four M > 4 earthquakes at Parkfield. The fault-strength changes produced by the distant 2004 Sumatra-Andaman earthquake are especially important, as they suggest that the very largest earthquakes may have a global influence on the strength of the Earth's fault systems. As such a perturbation would bring many fault zones closer to failure, it should lead to temporal clustering of global seismicity. This hypothesis seems to be supported by the unusually high number of M >or= 8 earthquakes occurring in the few years following the 2004 Sumatra-Andaman earthquake.
-
Farrington, R.B.; Pruett, J.C. Jr.
1984-05-14
A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.
-
Development of direct dating methods of fault gouges: Deep drilling into Nojima Fault, Japan
Miyawaki, M.; Uchida, J. I.; Satsukawa, T.
2017-12-01
It is crucial to develop a direct dating method of fault gouges for the assessment of recent fault activity in terms of site evaluation for nuclear power plants. This method would be useful in regions without Late Pleistocene overlying sediments. In order to estimate the age of the latest fault slip event, it is necessary to use fault gouges which have experienced high frictional heating sufficient for age resetting. It is said that frictional heating is higher in deeper depths, because frictional heating generated by fault movement is determined depending on the shear stress. Therefore, we should determine the reliable depth of age resetting, as it is likely that fault gouges from the ground surface have been dated to be older than the actual age of the latest fault movement due to incomplete resetting. In this project, we target the Nojima fault which triggered the 1995 Kobe earthquake in Japan. Samples are collected from various depths (300-1,500m) by trenching and drilling to investigate age resetting conditions and depth using several methods including electron spin resonance (ESR) and optical stimulated luminescence (OSL), which are applicable to ages later than the Late Pleistocene. The preliminary results by the ESR method show approx. 1.1 Ma1) at the ground surface and 0.15-0.28 Ma2) at 388 m depth, respectively. These results indicate that samples from deeper depths preserve a younger age. In contrast, the OSL method dated approx. 2,200 yr1) at the ground surface. Although further consideration is still needed as there is a large margin of error, this result indicates that the age resetting depth of OSL is relatively shallow due to the high thermosensitivity of OSL compare to ESR. In the future, we plan to carry out further investigation for dating fault gouges from various depths up to approx. 1,500 m to verify the use of these direct dating methods.1) Kyoto University, 2017. FY27 Commissioned for the disaster presentation on nuclear facilities (Drilling
-
Estrutura de informação sobre comércio exterior em Santa Catarina
Lino, Sônia Regina Lamego
2001-01-01
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Sócio-Econômico O trabalho tem como objetivo geral estudar a estrutura de informação sobre comércio exterior em Santa Catarina e o uso dessa estrutura de informação pelos usuários das médias empresas do setor moveleiro catarinense que exportam para o MERCOSUL. Os objetivos específicos são: 1) identificar as instituições públicas e privadas que mantêm estrutura de informações sobre comércio exterior em Santa Catarina; 2...
-
Fault estimation - A standard problem approach
DEFF Research Database (Denmark)
Stoustrup, J.; Niemann, Hans Henrik
2002-01-01
This paper presents a range of optimization based approaches to fault diagnosis. A variety of fault diagnosis problems are reformulated in the so-called standard problem set-up introduced in the literature on robust control. Once the standard problem formulations are given, the fault diagnosis...... problems can be solved by standard optimization techniques. The proposed methods include (1) fault diagnosis (fault estimation, (FE)) for systems with model uncertainties; FE for systems with parametric faults, and FE for a class of nonlinear systems. Copyright...
-
Hydrodynamic Modeling of Santa Marta's Big Marsh
International Nuclear Information System (INIS)
Saldarriaga, Juan
1991-01-01
The ecological degradation of Santa Marta's Big Marsh and their next areas it has motivated the realization of diagnosis studies and design by several state and private entities. One of the recommended efforts for international advisory it was to develop an ecological model that allowed the handling of the water body and the economic test of alternative of solution to those ecological problems. The first part of a model of this type is in turn a model that simulates the movement of the water inside the marsh, that is to say, a hydrodynamic model. The realization of this was taken charge to the civil engineering department, on the part of Colciencias. This article contains a general explanation of the hydrodynamic pattern that this being developed by a professors group. The ecological causes are described and antecedent, the parts that conform the complex of the Santa Marta big Marsh The marsh modeling is made and it is explained in qualitative form the model type Hydrodynamic used
-
Directory of Open Access Journals (Sweden)
Hiroki Sone
2007-01-01
Full Text Available Structural characteristics of fault rocks distributed within major fault zones provide basic information in understanding the physical aspects of faulting. Mesoscopic structural observations of the drilledcores from Taiwan Chelungpu-fault Drilling Project Hole-A are reported in this article to describe and reveal the distribution of fault rocks within the Chelungpu Fault System.
-
Passive Fault-tolerant Control of Discrete-time Piecewise Affine Systems against Actuator Faults
DEFF Research Database (Denmark)
Tabatabaeipour, Seyed Mojtaba; Izadi-Zamanabadi, Roozbeh; Bak, Thomas
2012-01-01
In this paper, we propose a new method for passive fault-tolerant control of discrete time piecewise affine systems. Actuator faults are considered. A reliable piecewise linear quadratic regulator (LQR) state feedback is designed such that it can tolerate actuator faults. A sufficient condition f...... is illustrated on a numerical example and a two degree of freedom helicopter....
-
Fault rocks and uranium mineralization
International Nuclear Information System (INIS)
Tong Hangshou.
1991-01-01
The types of fault rocks, microstructural characteristics of fault tectonite and their relationship with uranium mineralization in the uranium-productive granite area are discussed. According to the synthetic analysis on nature of stress, extent of crack and microstructural characteristics of fault rocks, they can be classified into five groups and sixteen subgroups. The author especially emphasizes the control of cataclasite group and fault breccia group over uranium mineralization in the uranium-productive granite area. It is considered that more effective study should be made on the macrostructure and microstructure of fault rocks. It is of an important practical significance in uranium exploration
-
Energy Technology Data Exchange (ETDEWEB)
Lee, Hee Kwon [Kangwon National Univ., Chuncheon (Korea, Republic of)
2004-01-15
Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs, grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Ulzin nuclear reactor. ESR signals of quartz grains separated from fault rocks collected from the E-W trend fault are saturated. This indicates that the last movement of these faults had occurred before the quaternary period. ESR dates from the NW trend faults range from 300ka to 700ka. On the other hand, ESR date of the NS trend fault is about 50ka. Results of this research suggest that long-term cyclic fault activity near the Ulzin nuclear reactor continued into the pleistocene.
-
Hududillah, Teuku Hafid; Simanjuntak, Andrean V. H.; Husni, Muhammad
2017-07-01
Gravity is a non-destructive geophysical technique that has numerous application in engineering and environmental field like locating a fault zone. The purpose of this study is to spot the Seulimeum fault system in Iejue, Aceh Besar (Indonesia) by using a gravity technique and correlate the result with geologic map and conjointly to grasp a trend pattern of fault system. An estimation of subsurface geological structure of Seulimeum fault has been done by using gravity field anomaly data. Gravity anomaly data which used in this study is from Topex that is processed up to Free Air Correction. The step in the Next data processing is applying Bouger correction and Terrin Correction to obtain complete Bouger anomaly that is topographically dependent. Subsurface modeling is done using the Gav2DC for windows software. The result showed a low residual gravity value at a north half compared to south a part of study space that indicated a pattern of fault zone. Gravity residual was successfully correlate with the geologic map that show the existence of the Seulimeum fault in this study space. The study of earthquake records can be used for differentiating the active and non active fault elements, this gives an indication that the delineated fault elements are active.
-
Integrated system fault diagnostics utilising digraph and fault tree-based approaches
International Nuclear Information System (INIS)
Bartlett, L.M.; Hurdle, E.E.; Kelly, E.M.
2009-01-01
With the growing intolerance to failures within systems, the issue of fault diagnosis has become ever prevalent. Information concerning these possible failures can help to minimise the disruption to the functionality of the system by allowing quick rectification. Traditional approaches to fault diagnosis within engineering systems have focused on sequential testing procedures and real-time mechanisms. Both methods have been predominantly limited to single fault causes. Latest approaches also consider the issue of multiple faults in reflection to the characteristics of modern day systems designed for high reliability. In addition, a diagnostic capability is required in real time and for changeable system functionality. This paper focuses on two approaches which have been developed to cater for the demands of diagnosis within current engineering systems, namely application of the fault tree analysis technique and the method of digraphs. Both use a comparative approach to consider differences between actual system behaviour and that expected. The procedural guidelines are discussed for each method, with an experimental aircraft fuel system used to test and demonstrate the features of the techniques. The effectiveness of the approaches is compared and their future potential highlighted
-
Calibration of Linked Hydrodynamic and Water Quality Model for Santa Margarita Lagoon
2016-07-01
was used to drive the transport and water quality kinetics for the simulation of 2007–2009. The sand berm, which controlled the opening/closure of...TECHNICAL REPORT 3015 July 2016 Calibration of Linked Hydrodynamic and Water Quality Model for Santa Margarita Lagoon Final Report Pei...Linked Hydrodynamic and Water Quality Model for Santa Margarita Lagoon Final Report Pei-Fang Wang Chuck Katz Ripan Barua SSC Pacific James
-
Santa Teresa y sus cartas, historia de los sentimientos
Directory of Open Access Journals (Sweden)
Egido, Teófanes
2015-12-01
Full Text Available Historical reflection on a peculiar dimension of St. Teresa of Jesus: the expression of her feelings in her writings, particularly in her abundant letters. The article focuses on the sense of humor, the joyfulness, and the importance of laughter in St. Teresa language, and also on the feeling of endearment with her family, with her order, with fray Juan de la Cruz. Ample space is dedicated to the tenderness towards girls in her convents. St. Teresa of Jesus appears as transgressor of 16th century social behaviours.Reflexión histórica sobre una dimensión peculiar de santa Teresa de Jesús: la expresión de sus sentimientos en sus escritos, de forma más especial en sus cartas abundantes. El artículo se centra en el sentido del humor, de la alegría, en la importancia de la risa en el lenguaje de santa Teresa y en el sentimiento de ternura con su familia, con su orden, con fray Juan de la Cruz. Se dedica un espacio amplio a la ternura hacia las niñas en sus conventos. Aparece santa Teresa de Jesús como trasgresora de los comportamientos sociales del siglo XVI.
-
Research of fault activity in Japan
International Nuclear Information System (INIS)
Nohara, T.; Nakatsuka, N.; Takeda, S.
2004-01-01
Six hundreds and eighty earthquakes causing significant damage have been recorded since the 7. century in Japan. It is important to recognize faults that will or are expected to be active in future in order to help reduce earthquake damage, estimate earthquake damage insurance and siting of nuclear facilities. Such faults are called 'active faults' in Japan, the definition of which is a fault that has moved intermittently for at least several hundred thousand years and is expected to continue to do so in future. Scientific research of active faults has been ongoing since the 1930's. Many results indicated that major earthquakes and fault movements in shallow crustal regions in Japan occurred repeatedly at existing active fault zones during the past. After the 1995 Southern Hyogo Prefecture Earthquake, 98 active fault zones were selected for fundamental survey, with the purpose of efficiently conducting an active fault survey in 'Plans for Fundamental Seismic Survey and Observation' by the headquarters for earthquake research promotion, which was attached to the Prime Minister's office of Japan. Forty two administrative divisions for earthquake disaster prevention have investigated the distribution and history of fault activity of 80 active fault zones. Although earthquake prediction is difficult, the behaviour of major active faults in Japan is being recognised. Japan Nuclear Cycle Development Institute (JNC) submitted a report titled 'H12: Project to Establish the. Scientific and Technical Basis for HLW Disposal in Japan' to the Atomic Energy Commission (AEC) of Japan for official review W. The Guidelines, which were defined by AEC, require the H12 Project to confirm the basic technical feasibility of safe HLW disposal in Japan. In this report the important issues relating to fault activity were described that are to understand the characteristics of current fault movements and the spatial extent and magnitude of the effects caused by these movements, and to
-
Fault Tolerant Wind Farm Control
DEFF Research Database (Denmark)
Odgaard, Peter Fogh; Stoustrup, Jakob
2013-01-01
In the recent years the wind turbine industry has focused on optimizing the cost of energy. One of the important factors in this is to increase reliability of the wind turbines. Advanced fault detection, isolation and accommodation are important tools in this process. Clearly most faults are deal...... scenarios. This benchmark model is used in an international competition dealing with Wind Farm fault detection and isolation and fault tolerant control....
-
Considerations about Santa Catalina Formation northeast of Uruguay
International Nuclear Information System (INIS)
Keidel, J.
1984-01-01
A serial of land deposits placed in Santa Catharina south Brazil, and northeast of Uruguay. Most of them have been composed with a number of marine sediments, marshy region and swamp from upper paleozoic and low mesozoic.
-
SDEM modelling of fault-propagation folding
DEFF Research Database (Denmark)
Clausen, O.R.; Egholm, D.L.; Poulsen, Jane Bang
2009-01-01
and variations in Mohr-Coulomb parameters including internal friction. Using SDEM modelling, we have mapped the propagation of the tip-line of the fault, as well as the evolution of the fold geometry across sedimentary layers of contrasting rheological parameters, as a function of the increased offset......Understanding the dynamics and kinematics of fault-propagation-folding is important for evaluating the associated hydrocarbon play, for accomplishing reliable section balancing (structural reconstruction), and for assessing seismic hazards. Accordingly, the deformation style of fault-propagation...... a precise indication of when faults develop and hence also the sequential evolution of secondary faults. Here we focus on the generation of a fault -propagated fold with a reverse sense of motion at the master fault, and varying only the dip of the master fault and the mechanical behaviour of the deformed...
-
Fault Recoverability Analysis via Cross-Gramian
DEFF Research Database (Denmark)
Shaker, Hamid Reza
2016-01-01
Engineering systems are vulnerable to different kinds of faults. Faults may compromise safety, cause sub-optimal operation and decline in performance if not preventing the whole system from functioning. Fault tolerant control (FTC) methods ensure that the system performance maintains within...... with feedback control. Fault recoverability provides important and useful information which could be used in analysis and design. However, computing fault recoverability is numerically expensive. In this paper, a new approach for computation of fault recoverability for bilinear systems is proposed...... approach for computation of fault recoverability is proposed which reduces the computational burden significantly. The proposed results are used for an electro-hydraulic drive to reveal the redundant actuating capabilities in the system....
-
An architecture for fault tolerant controllers
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Stoustrup, Jakob
2005-01-01
degradation in the sense of guaranteed degraded performance. A number of fault diagnosis problems, fault tolerant control problems, and feedback control with fault rejection problems are formulated/considered, mainly from a fault modeling point of view. The method is illustrated on a servo example including......A general architecture for fault tolerant control is proposed. The architecture is based on the (primary) YJBK parameterization of all stabilizing compensators and uses the dual YJBK parameterization to quantify the performance of the fault tolerant system. The approach suggested can be applied...
-
What is Fault Tolerant Control
DEFF Research Database (Denmark)
Blanke, Mogens; Frei, C. W.; Kraus, K.
2000-01-01
Faults in automated processes will often cause undesired reactions and shut-down of a controlled plant, and the consequences could be damage to the plant, to personnel or the environment. Fault-tolerant control is the synonym for a set of recent techniques that were developed to increase plant...... availability and reduce the risk of safety hazards. Its aim is to prevent that simple faults develop into serious failure. Fault-tolerant control merges several disciplines to achieve this goal, including on-line fault diagnosis, automatic condition assessment and calculation of remedial actions when a fault...... is detected. The envelope of the possible remedial actions is wide. This paper introduces tools to analyze and explore structure and other fundamental properties of an automated system such that any redundancy in the process can be fully utilized to enhance safety and a availability....
-
Energy Technology Data Exchange (ETDEWEB)
Azevedo, Mauricio F. de.; Lundeqvist, Carl G; Gomes, Gerson; Almeida, A E
1994-12-31
Use of natural gas as an alternative energy source on the thermo electric power plant of Santa Cruz are presented. Economic studies on hydroelectric power plants to use thermal generators during low water supply periods, costs of natural gas as a alternative energy fuel, and the engineer services to the conversion of fuel oil system, are discussed. 5 figs., 6 tabs.
-
Santa Lucia River basin. Development of water resources
International Nuclear Information System (INIS)
1970-01-01
The main objective of this study was to orient the development of water resources of the Santa Lucia River basin to maximum benefit in accordance with the priorities established by Government in relation to the National Development Plans
-
Introduction to fault tree analysis
International Nuclear Information System (INIS)
Barlow, R.E.; Lambert, H.E.
1975-01-01
An elementary, engineering oriented introduction to fault tree analysis is presented. The basic concepts, techniques and applications of fault tree analysis, FTA, are described. The two major steps of FTA are identified as (1) the construction of the fault tree and (2) its evaluation. The evaluation of the fault tree can be qualitative or quantitative depending upon the scope, extensiveness and use of the analysis. The advantages, limitations and usefulness of FTA are discussed
-
DEFF Research Database (Denmark)
Li, Hui; Yang, Chao; Hu, Yaogang
2014-01-01
Fault-tolerant control of current sensors is studied in this paper to improve the reliability of a doubly fed induction generator (DFIG). A fault-tolerant control system of current sensors is presented for the DFIG, which consists of a new current observer and an improved current sensor fault...... detection algorithm, and fault-tolerant control system are investigated by simulation. The results indicate that the outputs of the observer and the sensor are highly coherent. The fault detection algorithm can efficiently detect both soft and hard faults in current sensors, and the fault-tolerant control...
-
Conservation efforts and possibilities for increased collaboration in the Santa Cruz River watershed
Claire A. Zugmeyer; Emily M. Brott
2013-01-01
Attendees of the annual Santa Cruz River Researchersâ Day meetings have identified a need to expand collaboration, partnership, and sharing of lessons learned across the watershed. To help guide this interest, Sonoran Institute organized a symposium on 2 May 2012 entitled âSanta Cruz River Conservation.â The symposium had simultaneous Spanish/English translation and...
-
Cortinovis, Silvia; Balsamo, Fabrizio; Storti, Fabrizio
2017-04-01
The study of the microstructural and petrophysical evolution of cataclasites and gouges has a fundamental impact on both hydraulic and frictional properties of fault zones. In the last decades, growing attention has been payed to the characterization of carbonate fault core rocks due to the nucleation and propagation of coseismic ruptures in carbonate successions (e.g., Umbria-Marche 1997, L'Aquila 2009, Amatrice 2016 earthquakes in Central Apennines, Italy). Among several physical parameters, grain size and shape in fault core rocks are expected to control the way of sliding along the slip surfaces in active fault zones, thus influencing the propagation of coseismic ruptures during earthquakes. Nevertheless, the role of grain size and shape distribution evolution in controlling the weakening or strengthening behavior in seismogenic fault zones is still not fully understood also because a comprehensive database from natural fault cores is still missing. In this contribution, we present a preliminary study of seismogenic extensional fault zones in Central Apennines by combining detailed filed mapping with grain size and microstructural analysis of fault core rocks. Field mapping was aimed to describe the structural architecture of fault systems and the along-strike fault rock distribution and fracturing variations. In the laboratory we used a Malvern Mastersizer 3000 granulometer to obtain a precise grain size characterization of loose fault rocks combined with sieving for coarser size classes. In addition, we employed image analysis on thin sections to quantify the grain shape and size in cemented fault core rocks. The studied fault zones consist of an up to 5-10 m-thick fault core where most of slip is accommodated, surrounded by a tens-of-meters wide fractured damage zone. Fault core rocks consist of (1) loose to partially cemented breccias characterized by different grain size (from several cm up to mm) and variable grain shape (from very angular to sub
-
75 FR 4909 - Charter Bank: Santa Fe, New Mexico; Notice of Appointment of Receiver
2010-01-29
... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Charter Bank: Santa Fe, New Mexico; Notice... section 5(d)(2) of the Home Owners' Loan Act, the Office of Thrift Supervision has duly appointed the Federal Deposit Insurance Corporation as sole Receiver for Charter Bank, Santa Fe, New Mexico, (OTS No...
-
The Upper Santa Ynez River as Habitat for a Diverse Riparian Flora and Fauna
M. Violet Gray; James M. Greaves; Thomas E. Olson
1989-01-01
The upper Santa Ynez River, Santa Barbara County, provides habitats for a relatively large population of least Bell's vireos (Vireo bellii pusillus), as well as diverse riparian flora and fauna. Of particular interest is the richness of the species within particular guilds. Four species of vireos: least Bell's, warbling (Vireo...
-
Fault Isolation for Shipboard Decision Support
DEFF Research Database (Denmark)
Lajic, Zoran; Blanke, Mogens; Nielsen, Ulrik Dam
2010-01-01
Fault detection and fault isolation for in-service decision support systems for marine surface vehicles will be presented in this paper. The stochastic wave elevation and the associated ship responses are modeled in the frequency domain. The paper takes as an example fault isolation of a containe......Fault detection and fault isolation for in-service decision support systems for marine surface vehicles will be presented in this paper. The stochastic wave elevation and the associated ship responses are modeled in the frequency domain. The paper takes as an example fault isolation...... to the quality of decisions given to navigators....
-
Zhao, Yongli; Li, Xin; Li, Huadong; Wang, Xinbo; Zhang, Jie; Huang, Shanguo
2013-01-28
Based on a distributed method of bit-error-rate (BER) monitoring, a novel multi-link faults restoration algorithm is proposed for dynamic optical networks. The concept of fuzzy fault set (FFS) is first introduced for multi-link faults localization, which includes all possible optical equipment or fiber links with a membership describing the possibility of faults. Such a set is characterized by a membership function which assigns each object a grade of membership ranging from zero to one. OSPF protocol extension is designed for the BER information flooding in the network. The BER information can be correlated to link faults through FFS. Based on the BER information and FFS, multi-link faults localization mechanism and restoration algorithm are implemented and experimentally demonstrated on a GMPLS enabled optical network testbed with 40 wavelengths in each fiber link. Experimental results show that the novel localization mechanism has better performance compared with the extended limited perimeter vector matching (LVM) protocol and the restoration algorithm can improve the restoration success rate under multi-link faults scenario.
-
The Van Sant AVHRR image projected onto a rhombicosidodecahedron
Baron, Michael; Morain, Stan
1996-03-01
IDEATION, a design and development corporation, Santa Fe, New Mexico, has modeled Tom Van Sant's ``The Earth From Space'' image to a rhombicosidodecahedron. ``The Earth from Space'' image, produced by the Geosphere® Project in Santa Monica, California, was developed from hundreds of AVHRR pictures and published as a Mercator projection. IDEATION, utilizing a digitized Robinson Projection, fitted the image to foldable, paper components which, when interconnected by means of a unique tabular system, results in a rhombicosidodecahedron representation of the Earth exposing 30 square, 20 triangular, and 12 pentagonal faces. Because the resulting model is not spherical, the borders of the represented features were rectified to match the intersecting planes of the model's faces. The resulting product will be licensed and commercially produced for use by elementary and secondary students. Market research indicates the model will be used in both the demonstration of geometric principles and the teaching of fundamental spatial relations of the Earth's lands and oceans.
-
Active fault diagnosis by temporary destabilization
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Stoustrup, Jakob
2006-01-01
An active fault diagnosis method for parametric or multiplicative faults is proposed. The method periodically adds a term to the controller that for a short period of time renders the system unstable if a fault has occurred, which facilitates rapid fault detection. An illustrative example is given....
-
Energy Technology Data Exchange (ETDEWEB)
NONE
1997-07-01
This energy balance of the Santa Catarina State presents the following main topics that can be outstanding: economic aspects; supply and demand of energy by source 1980-1996; energy consumption by sector 1980/1996; energy interchange; and balance of the transformation centers 1980/1996.
-
Fault trees for diagnosis of system fault conditions
International Nuclear Information System (INIS)
Lambert, H.E.; Yadigaroglu, G.
1977-01-01
Methods for generating repair checklists on the basis of fault tree logic and probabilistic importance are presented. A one-step-ahead optimization procedure, based on the concept of component criticality, minimizing the expected time to diagnose system failure is outlined. Options available to the operator of a nuclear power plant when system fault conditions occur are addressed. A low-pressure emergency core cooling injection system, a standby safeguard system of a pressurized water reactor power plant, is chosen as an example illustrating the methods presented
-
Delle Piane, Claudio; Giwelli, Ausama; Clennell, M. Ben; Esteban, Lionel; Nogueira Kiewiet, Melissa Cristina D.; Kiewiet, Leigh; Kager, Shane; Raimon, John
2016-10-01
We present a novel experimental approach devised to test the hydro-mechanical behaviour of different structural elements of carbonate fault rocks during experimental re-activation. Experimentally faulted core plugs were subject to triaxial tests under water saturated conditions simulating depletion processes in reservoirs. Different fault zone structural elements were created by shearing initially intact travertine blocks (nominal size: 240 × 110 × 150 mm) to a maximum displacement of 20 and 120 mm under different normal stresses. Meso-and microstructural features of these sample and the thickness to displacement ratio characteristics of their deformation zones allowed to classify them as experimentally created damage zones (displacement of 20 mm) and fault cores (displacement of 120 mm). Following direct shear testing, cylindrical plugs with diameter of 38 mm were drilled across the slip surface to be re-activated in a conventional triaxial configuration monitoring the permeability and frictional behaviour of the samples as a function of applied stress. All re-activation experiments on faulted plugs showed consistent frictional response consisting of an initial fast hardening followed by apparent yield up to a friction coefficient of approximately 0.6 attained at around 2 mm of displacement. Permeability in the re-activation experiments shows exponential decay with increasing mean effective stress. The rate of permeability decline with mean effective stress is higher in the fault core plugs than in the simulated damage zone ones. It can be concluded that the presence of gouge in un-cemented carbonate faults results in their sealing character and that leakage cannot be achieved by renewed movement on the fault plane alone, at least not within the range of slip measureable with our apparatus (i.e. approximately 7 mm of cumulative displacement). Additionally, it is shown that under sub seismic slip rates re-activated carbonate faults remain strong and no frictional
-
Chen, Yingyi; Zhen, Zhumi; Yu, Huihui; Xu, Jing
2017-01-14
In the Internet of Things (IoT) equipment used for aquaculture is often deployed in outdoor ponds located in remote areas. Faults occur frequently in these tough environments and the staff generally lack professional knowledge and pay a low degree of attention in these areas. Once faults happen, expert personnel must carry out maintenance outdoors. Therefore, this study presents an intelligent method for fault diagnosis based on fault tree analysis and a fuzzy neural network. In the proposed method, first, the fault tree presents a logic structure of fault symptoms and faults. Second, rules extracted from the fault trees avoid duplicate and redundancy. Third, the fuzzy neural network is applied to train the relationship mapping between fault symptoms and faults. In the aquaculture IoT, one fault can cause various fault symptoms, and one symptom can be caused by a variety of faults. Four fault relationships are obtained. Results show that one symptom-to-one fault, two symptoms-to-two faults, and two symptoms-to-one fault relationships can be rapidly diagnosed with high precision, while one symptom-to-two faults patterns perform not so well, but are still worth researching. This model implements diagnosis for most kinds of faults in the aquaculture IoT.
-
Directory of Open Access Journals (Sweden)
Yingyi Chen
2017-01-01
Full Text Available In the Internet of Things (IoT equipment used for aquaculture is often deployed in outdoor ponds located in remote areas. Faults occur frequently in these tough environments and the staff generally lack professional knowledge and pay a low degree of attention in these areas. Once faults happen, expert personnel must carry out maintenance outdoors. Therefore, this study presents an intelligent method for fault diagnosis based on fault tree analysis and a fuzzy neural network. In the proposed method, first, the fault tree presents a logic structure of fault symptoms and faults. Second, rules extracted from the fault trees avoid duplicate and redundancy. Third, the fuzzy neural network is applied to train the relationship mapping between fault symptoms and faults. In the aquaculture IoT, one fault can cause various fault symptoms, and one symptom can be caused by a variety of faults. Four fault relationships are obtained. Results show that one symptom-to-one fault, two symptoms-to-two faults, and two symptoms-to-one fault relationships can be rapidly diagnosed with high precision, while one symptom-to-two faults patterns perform not so well, but are still worth researching. This model implements diagnosis for most kinds of faults in the aquaculture IoT.
-
Santa Barbara, California Tsunami Forecast Grids for MOST Model
National Oceanic and Atmospheric Administration, Department of Commerce — The Santa Barbara, California Forecast Model Grids provides bathymetric data strictly for tsunami inundation modeling with the Method of Splitting Tsunami (MOST)...
-
Functional Fault Modeling Conventions and Practices for Real-Time Fault Isolation
Ferrell, Bob; Lewis, Mark; Perotti, Jose; Oostdyk, Rebecca; Brown, Barbara
2010-01-01
The purpose of this paper is to present the conventions, best practices, and processes that were established based on the prototype development of a Functional Fault Model (FFM) for a Cryogenic System that would be used for real-time Fault Isolation in a Fault Detection, Isolation, and Recovery (FDIR) system. The FDIR system is envisioned to perform health management functions for both a launch vehicle and the ground systems that support the vehicle during checkout and launch countdown by using a suite of complimentary software tools that alert operators to anomalies and failures in real-time. The FFMs were created offline but would eventually be used by a real-time reasoner to isolate faults in a Cryogenic System. Through their development and review, a set of modeling conventions and best practices were established. The prototype FFM development also provided a pathfinder for future FFM development processes. This paper documents the rationale and considerations for robust FFMs that can easily be transitioned to a real-time operating environment.
-
International Nuclear Information System (INIS)
Park, C.-R.; Kim, M.-J.; Yu, S.-D.; Yim, S.-W.; Kim, H.-R.; Hyun, O.-B.
2010-01-01
Performance of a resistive superconducting fault current limiter (SFCL) component is usually limited by temperature rise associated with energy input by fault current application during a fault. Therefore, it is expected that short application of the fault current may enhance the power ratings of the component. This can be accomplished by a combination of a HTS component and a mechanical switch. The fast switch (FS) developed recently enables the fault duration to be as short as 1/2 cycle after a fault. Various second-generation (2G) high temperature superconductors (HTS) and YBCO thin films have been tested. The relation between the rated voltage V and the fault duration time t was found to be V 2 ∼ t -1 . Based upon the relation, we predict that when the FS break the fault current within 1/2 cycle after a fault, the amount of HTS components required to build an SFCL can be reduced by as much as about 60%, of that when breaking the fault current at three cycles.
-
Pengaruh Kepemimpinan Situasional terhadap Semangat Kerja Perawat Rumah Sakit Santa Maria Pekanbaru
Sutrisna, Endang; Anggrenni, Dian Prapty
2015-01-01
This research aims to find the implications of leadership on keep spirit of nurses in Santa Maria Hospital Pekanbaru. Leadership as an independent variable (X) consist of leadership telling, selling, participating, and delegating. And keep spirit as the dependent variable (Y) cosist pf salary, incentive and allowance and improvement of welfare.The research used sample of the nurses in Santa Maria Pekanbaru. The number of this sample is 67 persons with slovin. This research is also used Strati...
-
HRGC-MS analysis of terpenoids from Maytenus ilicifolia and Maytenus aquifolium ("espinheira santa"
Directory of Open Access Journals (Sweden)
Cordeiro Paulo J. M.
1999-01-01
Full Text Available This work describes the identification of some of the minor chemical constituents of "espinheira santa" (Maytenus ilicifolia and Maytenus aquifolium, Celastraceae, a medicinal plant widely utilized in Brazil. By using high resolution gas chromatography coupled to mass spectrometry (HRGC-MS, it was possible to identify mainly triterpenoids and steroids in "espinheira santa", most of them reported for the first time in both Maytenus species.
-
Architecting Fault-Tolerant Software Systems
Sözer, Hasan
2009-01-01
The increasing size and complexity of software systems makes it hard to prevent or remove all possible faults. Faults that remain in the system can eventually lead to a system failure. Fault tolerance techniques are introduced for enabling systems to recover and continue operation when they are
-
Finn, S.; Liberty, L. M.; Haeussler, P. J.; Northrup, C.; Pratt, T. L.
2010-12-01
We interpret regionally extensive, active faults beneath Prince William Sound (PWS), Alaska, to be structurally linked to deeper megathrust splay faults, such as the one that ruptured in the 1964 M9.2 earthquake. Western PWS in particular is unique; the locations of active faulting offer insights into the transition at the southern terminus of the previously subducted Yakutat slab to Pacific plate subduction. Newly acquired high-resolution, marine seismic data show three seismic facies related to Holocene and older Quaternary to Tertiary strata. These sediments are cut by numerous high angle normal faults in the hanging wall of megathrust splay. Crustal-scale seismic reflection profiles show splay faults emerging from 20 km depth between the Yakutat block and North American crust and surfacing as the Hanning Bay and Patton Bay faults. A distinct boundary coinciding beneath the Hinchinbrook Entrance causes a systematic fault trend change from N30E in southwestern PWS to N70E in northeastern PWS. The fault trend change underneath Hinchinbrook Entrance may occur gradually or abruptly and there is evidence for similar deformation near the Montague Strait Entrance. Landward of surface expressions of the splay fault, we observe subsidence, faulting, and landslides that record deformation associated with the 1964 and older megathrust earthquakes. Surface exposures of Tertiary rocks throughout PWS along with new apatite-helium dates suggest long-term and regional uplift with localized, fault-controlled subsidence.
-
Directory of Open Access Journals (Sweden)
Vijay Kumar
2016-01-01
Full Text Available Fault detection process (FDP and Fault correction process (FCP are important phases of software development life cycle (SDLC. It is essential for software to undergo a testing phase, during which faults are detected and corrected. The main goal of this article is to allocate the testing resources in an optimal manner to minimize the cost during testing phase using FDP and FCP under dynamic environment. In this paper, we first assume there is a time lag between fault detection and fault correction. Thus, removal of a fault is performed after a fault is detected. In addition, detection process and correction process are taken to be independent simultaneous activities with different budgetary constraints. A structured optimal policy based on optimal control theory is proposed for software managers to optimize the allocation of the limited resources with the reliability criteria. Furthermore, release policy for the proposed model is also discussed. Numerical example is given in support of the theoretical results.
-
Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip.
Yang, Zhibing; Juanes, Ruben
2018-02-01
Pore fluid pressure in a fault zone can be altered by natural processes (e.g., mineral dehydration and thermal pressurization) and industrial operations involving subsurface fluid injection and extraction for the development of energy and water resources. However, the effect of pore pressure change on the stability and slip motion of a preexisting geologic fault remains poorly understood; yet, it is critical for the assessment of seismic hazard. Here, we develop a micromechanical model to investigate the effect of pore pressure on fault slip behavior. The model couples fluid flow on the network of pores with mechanical deformation of the skeleton of solid grains. Pore fluid exerts pressure force onto the grains, the motion of which is solved using the discrete element method. We conceptualize the fault zone as a gouge layer sandwiched between two blocks. We study fault stability in the presence of a pressure discontinuity across the gouge layer and compare it with the case of continuous (homogeneous) pore pressure. We focus on the onset of shear failure in the gouge layer and reproduce conditions where the failure plane is parallel to the fault. We show that when the pressure is discontinuous across the fault, the onset of slip occurs on the side with the higher pore pressure, and that this onset is controlled by the maximum pressure on both sides of the fault. The results shed new light on the use of the effective stress principle and the Coulomb failure criterion in evaluating the stability of a complex fault zone.
-
Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip
Yang, Zhibing; Juanes, Ruben
2018-02-01
Pore fluid pressure in a fault zone can be altered by natural processes (e.g., mineral dehydration and thermal pressurization) and industrial operations involving subsurface fluid injection and extraction for the development of energy and water resources. However, the effect of pore pressure change on the stability and slip motion of a preexisting geologic fault remains poorly understood; yet, it is critical for the assessment of seismic hazard. Here, we develop a micromechanical model to investigate the effect of pore pressure on fault slip behavior. The model couples fluid flow on the network of pores with mechanical deformation of the skeleton of solid grains. Pore fluid exerts pressure force onto the grains, the motion of which is solved using the discrete element method. We conceptualize the fault zone as a gouge layer sandwiched between two blocks. We study fault stability in the presence of a pressure discontinuity across the gouge layer and compare it with the case of continuous (homogeneous) pore pressure. We focus on the onset of shear failure in the gouge layer and reproduce conditions where the failure plane is parallel to the fault. We show that when the pressure is discontinuous across the fault, the onset of slip occurs on the side with the higher pore pressure, and that this onset is controlled by the maximum pressure on both sides of the fault. The results shed new light on the use of the effective stress principle and the Coulomb failure criterion in evaluating the stability of a complex fault zone.
-
Ferranti, L.; Wan, Y.; Keviczky, T.
2018-01-01
This paper focuses on the longitudinal control of an Airbus passenger aircraft in the presence of elevator jamming faults. In particular, in this paper, we address permanent and temporary actuator jamming faults using a novel reconfigurable fault-tolerant predictive control design. Due to their
-
Fault Detection for Diesel Engine Actuator
DEFF Research Database (Denmark)
Blanke, M.; Bøgh, S.A.; Jørgensen, R.B.
1994-01-01
Feedback control systems are vulnerable to faults in control loop sensors and actuators, because feedback actions may cause abrupt responses and process damage when faults occur.......Feedback control systems are vulnerable to faults in control loop sensors and actuators, because feedback actions may cause abrupt responses and process damage when faults occur....
-
Directory of Open Access Journals (Sweden)
Jianing Wu
2014-01-01
Full Text Available A new fault injection and Gini concordance based method has been developed for fault severity analysis for multibody mechanical systems concerning their dynamic properties. The fault tree analysis (FTA is employed to roughly identify the faults needed to be considered. According to constitution of the mechanical system, the dynamic properties can be achieved by solving the equations that include many types of faults which are injected by using the fault injection technique. Then, the Gini concordance is used to measure the correspondence between the performance with faults and under normal operation thereby providing useful hints of severity ranking in subsystems for reliability design. One numerical example and a series of experiments are provided to illustrate the application of the new method. The results indicate that the proposed method can accurately model the faults and receive the correct information of fault severity. Some strategies are also proposed for reliability improvement of the spacecraft solar array.
-
Synthesis of Fault-Tolerant Embedded Systems
DEFF Research Database (Denmark)
Eles, Petru; Izosimov, Viacheslav; Pop, Paul
2008-01-01
This work addresses the issue of design optimization for fault- tolerant hard real-time systems. In particular, our focus is on the handling of transient faults using both checkpointing with rollback recovery and active replication. Fault tolerant schedules are generated based on a conditional...... process graph representation. The formulated system synthesis approaches decide the assignment of fault-tolerance policies to processes, the optimal placement of checkpoints and the mapping of processes to processors, such that multiple transient faults are tolerated, transparency requirements...
-
Active fault diagnosis by controller modification
DEFF Research Database (Denmark)
Stoustrup, Jakob; Niemann, Hans Henrik
2010-01-01
Two active fault diagnosis methods for additive or parametric faults are proposed. Both methods are based on controller reconfiguration rather than on requiring an exogenous excitation signal, as it is otherwise common in active fault diagnosis. For the first method, it is assumed that the system...... considered is controlled by an observer-based controller. The method is then based on a number of alternate observers, each designed to be sensitive to one or more additive faults. Periodically, the observer part of the controller is changed into the sequence of fault sensitive observers. This is done...... in a way that guarantees the continuity of transition and global stability using a recent result on observer parameterization. An illustrative example inspired by a field study of a drag racing vehicle is given. For the second method, an active fault diagnosis method for parametric faults is proposed...
-
Modernization projects in Santa Maria e Garona; Proyectos de modernizacion en Santa Maria de Garona
Energy Technology Data Exchange (ETDEWEB)
Marcos, R.; Alutiz, J. I.; Garcia Sanchez, M.
2011-07-01
This article shows a vision of the Santa Maria de Garona power Plant modernization guidelines and it also presents the most significant projects deployed in the last decade at the power plant grouped in mechanics projects, electrical projects, instrumentations projects and IT projects. At the same time three projects are explained in more detail: the change of one of the main transformers, the evolution from paper recorders to paperless video graphic recorders and the new plant data information system. (Author)
-
Directory of Open Access Journals (Sweden)
Xiaojie Guo
2016-12-01
Full Text Available Fault diagnosis in rotating machinery is significant to avoid serious accidents; thus, an accurate and timely diagnosis method is necessary. With the breakthrough in deep learning algorithm, some intelligent methods, such as deep belief network (DBN and deep convolution neural network (DCNN, have been developed with satisfactory performances to conduct machinery fault diagnosis. However, only a few of these methods consider properly dealing with noises that exist in practical situations and the denoising methods are in need of extensive professional experiences. Accordingly, rethinking the fault diagnosis method based on deep architectures is essential. Hence, this study proposes an automatic denoising and feature extraction method that inherently considers spatial and temporal correlations. In this study, an integrated deep fault recognizer model based on the stacked denoising autoencoder (SDAE is applied to both denoise random noises in the raw signals and represent fault features in fault pattern diagnosis for both bearing rolling fault and gearbox fault, and trained in a greedy layer-wise fashion. Finally, the experimental validation demonstrates that the proposed method has better diagnosis accuracy than DBN, particularly in the existing situation of noises with superiority of approximately 7% in fault diagnosis accuracy.
-
Fault diagnostics of dynamic system operation using a fault tree based method
International Nuclear Information System (INIS)
Hurdle, E.E.; Bartlett, L.M.; Andrews, J.D.
2009-01-01
For conventional systems, their availability can be considerably improved by reducing the time taken to restore the system to the working state when faults occur. Fault identification can be a significant proportion of the time taken in the repair process. Having diagnosed the problem the restoration of the system back to its fully functioning condition can then take place. This paper expands the capability of previous approaches to fault detection and identification using fault trees for application to dynamically changing systems. The technique has two phases. The first phase is modelling and preparation carried out offline. This gathers information on the effects that sub-system failure will have on the system performance. Causes of the sub-system failures are developed in the form of fault trees. The second phase is application. Sensors are installed on the system to provide information about current system performance from which the potential causes can be deduced. A simple system example is used to demonstrate the features of the method. To illustrate the potential for the method to deal with additional system complexity and redundancy, a section from an aircraft fuel system is used. A discussion of the results is provided.
-
Stewart, N.; Gaudemer, Y.; Manighetti, I.; Serreau, L.; Vincendeau, A.; Dominguez, S.; Mattéo, L.; Malavieille, J.
2018-01-01
Measuring fault offsets preserved at the ground surface is of primary importance to recover earthquake and long-term slip distributions and understand fault mechanics. The recent explosion of high-resolution topographic data, such as Lidar and photogrammetric digital elevation models, offers an unprecedented opportunity to measure dense collections of fault offsets. We have developed a new Matlab code, 3D_Fault_Offsets, to automate these measurements. In topographic data, 3D_Fault_Offsets mathematically identifies and represents nine of the most prominent geometric characteristics of common sublinear markers along faults (especially strike slip) in 3-D, such as the streambed (minimum elevation), top, free face and base of channel banks or scarps (minimum Laplacian, maximum gradient, and maximum Laplacian), and ridges (maximum elevation). By calculating best fit lines through the nine point clouds on either side of the fault, the code computes the lateral and vertical offsets between the piercing points of these lines onto the fault plane, providing nine lateral and nine vertical offset measures per marker. Through a Monte Carlo approach, the code calculates the total uncertainty on each offset. It then provides tools to statistically analyze the dense collection of measures and to reconstruct the prefaulted marker geometry in the horizontal and vertical planes. We applied 3D_Fault_Offsets to remeasure previously published offsets across 88 markers on the San Andreas, Owens Valley, and Hope faults. We obtained 5,454 lateral and vertical offset measures. These automatic measures compare well to prior ones, field and remote, while their rich record provides new insights on the preservation of fault displacements in the morphology.
-
Fälth, B.; Lund, B.; Hökmark, H.
2017-12-01
Aiming at improved safety assessment of geological nuclear waste repositories, we use dynamic 3D earthquake simulations to estimate the potential for co-seismic off-fault distributed fracture slip. Our model comprises a 12.5 x 8.5 km strike-slip fault embedded in a full space continuum where we apply a homogeneous initial stress field. In the reference case (Case 1) the fault is planar and oriented optimally for slip, given the assumed stress field. To examine the potential impact of fault roughness, we also study cases where the fault surface has undulations with self-similar fractal properties. In both the planar and the undulated cases the fault has homogeneous frictional properties. In a set of ten rough fault models (Case 2), the fault friction is equal to that of Case 1, meaning that these models generate lower seismic moments than Case 1. In another set of ten rough fault models (Case 3), the fault dynamic friction is adjusted such that seismic moments on par with that of Case 1 are generated. For the propagation of the earthquake rupture we adopt the linear slip-weakening law and obtain Mw 6.4 in Case 1 and Case 3, and Mw 6.3 in Case 2 (35 % lower moment than Case 1). During rupture we monitor the off-fault stress evolution along the fault plane at 250 m distance and calculate the corresponding evolution of the Coulomb Failure Stress (CFS) on optimally oriented hypothetical fracture planes. For the stress-pore pressure coupling, we assume Skempton's coefficient B = 0.5 as a base case value, but also examine the sensitivity to variations of B. We observe the following: (I) The CFS values, and thus the potential for fracture slip, tend to increase with the distance from the hypocenter. This is in accordance with results by other authors. (II) The highest CFS values are generated by quasi-static stress concentrations around fault edges and around large scale fault bends, where we obtain values of the order of 10 MPa. (III) Locally, fault roughness may have a
-
Fuzzy fault diagnosis system of MCFC
Institute of Scientific and Technical Information of China (English)
Wang Zhenlei; Qian Feng; Cao Guangyi
2005-01-01
A kind of fault diagnosis system of molten carbonate fuel cell (MCFC) stack is proposed in this paper. It is composed of a fuzzy neural network (FNN) and a fault diagnosis element. FNN is able to deal with the information of the expert knowledge and the experiment data efficiently. It also has the ability to approximate any smooth system. FNN is used to identify the fault diagnosis model of MCFC stack. The fuzzy fault decision element can diagnose the state of the MCFC generating system, normal or fault, and can decide the type of the fault based on the outputs of FNN model and the MCFC system. Some simulation experiment results are demonstrated in this paper.
-
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Fault. 845.302 Section 845.302... EMPLOYEES RETIREMENT SYSTEM-DEBT COLLECTION Standards for Waiver of Overpayments § 845.302 Fault. A recipient of an overpayment is without fault if he or she performed no act of commission or omission that...
-
2010-04-01
... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Fault. 410.561b Section 410.561b Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, TITLE IV-BLACK LUNG BENEFITS (1969- ) Payment of Benefits § 410.561b Fault. Fault as used in without fault (see § 410...
-
From tomographic images to fault heterogeneities
Directory of Open Access Journals (Sweden)
A. Amato
1994-06-01
Full Text Available Local Earthquake Tomography (LET is a useful tool for imaging lateral heterogeneities in the upper crust. The pattern of P- and S-wave velocity anomalies, in relation to the seismicity distribution along active fault zones. can shed light on the existence of discrete seismogenic patches. Recent tomographic studies in well monitored seismic areas have shown that the regions with large seismic moment release generally correspond to high velocity zones (HVZ's. In this paper, we discuss the relationship between the seismogenic behavior of faults and the velocity structure of fault zones as inferred from seismic tomography. First, we review some recent tomographic studies in active strike-slip faults. We show examples from different segments of the San Andreas fault system (Parkfield, Loma Prieta, where detailed studies have been carried out in recent years. We also show two applications of LET to thrust faults (Coalinga, Friuli. Then, we focus on the Irpinia normal fault zone (South-Central Italy, where a Ms = 6.9 earthquake occurred in 1980 and many thousands of attershock travel time data are available. We find that earthquake hypocenters concentrate in HVZ's, whereas low velocity zones (LVZ s appear to be relatively aseismic. The main HVZ's along which the mainshock rupture bas propagated may correspond to velocity weakening fault regions, whereas the LVZ's are probably related to weak materials undergoing stable slip (velocity strengthening. A correlation exists between this HVZ and the area with larger coseismic slip along the fault, according to both surface evidence (a fault scarp as high as 1 m and strong ground motion waveform modeling. Smaller wave-length, low-velocity anomalies detected along the fault may be the expression of velocity strengthening sections, where aseismic slip occurs. According to our results, the rupture at the nucleation depth (~ 10-12 km is continuous for the whole fault lenoth (~ 30 km, whereas at shallow depth
-
Fault lubrication during earthquakes.
Di Toro, G; Han, R; Hirose, T; De Paola, N; Nielsen, S; Mizoguchi, K; Ferri, F; Cocco, M; Shimamoto, T
2011-03-24
The determination of rock friction at seismic slip rates (about 1 m s(-1)) is of paramount importance in earthquake mechanics, as fault friction controls the stress drop, the mechanical work and the frictional heat generated during slip. Given the difficulty in determining friction by seismological methods, elucidating constraints are derived from experimental studies. Here we review a large set of published and unpublished experiments (∼300) performed in rotary shear apparatus at slip rates of 0.1-2.6 m s(-1). The experiments indicate a significant decrease in friction (of up to one order of magnitude), which we term fault lubrication, both for cohesive (silicate-built, quartz-built and carbonate-built) rocks and non-cohesive rocks (clay-rich, anhydrite, gypsum and dolomite gouges) typical of crustal seismogenic sources. The available mechanical work and the associated temperature rise in the slipping zone trigger a number of physicochemical processes (gelification, decarbonation and dehydration reactions, melting and so on) whose products are responsible for fault lubrication. The similarity between (1) experimental and natural fault products and (2) mechanical work measures resulting from these laboratory experiments and seismological estimates suggests that it is reasonable to extrapolate experimental data to conditions typical of earthquake nucleation depths (7-15 km). It seems that faults are lubricated during earthquakes, irrespective of the fault rock composition and of the specific weakening mechanism involved.
-
Laboratory scale micro-seismic monitoring of rock faulting and injection-induced fault reactivation
Sarout, J.; Dautriat, J.; Esteban, L.; Lumley, D. E.; King, A.
2017-12-01
The South West Hub CCS project in Western Australia aims to evaluate the feasibility and impact of geosequestration of CO2 in the Lesueur sandstone formation. Part of this evaluation focuses on the feasibility and design of a robust passive seismic monitoring array. Micro-seismicity monitoring can be used to image the injected CO2plume, or any geomechanical fracture/fault activity; and thus serve as an early warning system by measuring low-level (unfelt) seismicity that may precede potentially larger (felt) earthquakes. This paper describes laboratory deformation experiments replicating typical field scenarios of fluid injection in faulted reservoirs. Two pairs of cylindrical core specimens were recovered from the Harvey-1 well at depths of 1924 m and 2508 m. In each specimen a fault is first generated at the in situ stress, pore pressure and temperature by increasing the vertical stress beyond the peak in a triaxial stress vessel at CSIRO's Geomechanics & Geophysics Lab. The faulted specimen is then stabilized by decreasing the vertical stress. The freshly formed fault is subsequently reactivated by brine injection and increase of the pore pressure until slip occurs again. This second slip event is then controlled in displacement and allowed to develop for a few millimeters. The micro-seismic (MS) response of the rock during the initial fracturing and subsequent reactivation is monitored using an array of 16 ultrasonic sensors attached to the specimen's surface. The recorded MS events are relocated in space and time, and correlate well with the 3D X-ray CT images of the specimen obtained post-mortem. The time evolution of the structural changes induced within the triaxial stress vessel is therefore reliably inferred. The recorded MS activity shows that, as expected, the increase of the vertical stress beyond the peak led to an inclined shear fault. The injection of fluid and the resulting increase in pore pressure led first to a reactivation of the pre
-
Final Technical Report: PV Fault Detection Tool.
Energy Technology Data Exchange (ETDEWEB)
King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2015-12-01
The PV Fault Detection Tool project plans to demonstrate that the FDT can (a) detect catastrophic and degradation faults and (b) identify the type of fault. This will be accomplished by collecting fault signatures using different instruments and integrating this information to establish a logical controller for detecting, diagnosing and classifying each fault.
-
Layered Fault Management Architecture
National Research Council Canada - National Science Library
Sztipanovits, Janos
2004-01-01
... UAVs or Organic Air Vehicles. The approach of this effort was to analyze fault management requirements of formation flight for fleets of UAVs, and develop a layered fault management architecture which demonstrates significant...
-
Distributed bearing fault diagnosis based on vibration analysis
Dolenc, Boštjan; Boškoski, Pavle; Juričić, Đani
2016-01-01
Distributed bearing faults appear under various circumstances, for example due to electroerosion or the progression of localized faults. Bearings with distributed faults tend to generate more complex vibration patterns than those with localized faults. Despite the frequent occurrence of such faults, their diagnosis has attracted limited attention. This paper examines a method for the diagnosis of distributed bearing faults employing vibration analysis. The vibrational patterns generated are modeled by incorporating the geometrical imperfections of the bearing components. Comparing envelope spectra of vibration signals shows that one can distinguish between localized and distributed faults. Furthermore, a diagnostic procedure for the detection of distributed faults is proposed. This is evaluated on several bearings with naturally born distributed faults, which are compared with fault-free bearings and bearings with localized faults. It is shown experimentally that features extracted from vibrations in fault-free, localized and distributed fault conditions form clearly separable clusters, thus enabling diagnosis.
-
High stresses stored in fault zones: example of the Nojima fault (Japan)
Boullier, Anne-Marie; Robach, Odile; Ildefonse, Benoît; Barou, Fabrice; Mainprice, David; Ohtani, Tomoyuki; Fujimoto, Koichiro
2018-04-01
During the last decade pulverized rocks have been described on outcrops along large active faults and attributed to damage related to a propagating seismic rupture front. Questions remain concerning the maximal lateral distance from the fault plane and maximal depth for dynamic damage to be imprinted in rocks. In order to document these questions, a representative core sample of granodiorite located 51.3 m from the Nojima fault (Japan) that was drilled after the Hyogo-ken Nanbu (Kobe) earthquake is studied by using electron backscattered diffraction (EBSD) and high-resolution X-ray Laue microdiffraction. Although located outside of the Nojima damage fault zone and macroscopically undeformed, the sample shows pervasive microfractures and local fragmentation. These features are attributed to the first stage of seismic activity along the Nojima fault characterized by laumontite as the main sealing mineral. EBSD mapping was used in order to characterize the crystallographic orientation and deformation microstructures in the sample, and X-ray microdiffraction was used to measure elastic strain and residual stresses on each point of the mapped quartz grain. Both methods give consistent results on the crystallographic orientation and show small and short wavelength misorientations associated with laumontite-sealed microfractures and alignments of tiny fluid inclusions. Deformation microstructures in quartz are symptomatic of the semi-brittle faulting regime, in which low-temperature brittle plastic deformation and stress-driven dissolution-deposition processes occur conjointly. This deformation occurred at a 3.7-11.1 km depth interval as indicated by the laumontite stability domain. Residual stresses are calculated from deviatoric elastic strain tensor measured using X-ray Laue microdiffraction using the Hooke's law. The modal value of the von Mises stress distribution is at 100 MPa and the mean at 141 MPa. Such stress values are comparable to the peak strength of a
-
High stresses stored in fault zones: example of the Nojima fault (Japan
Directory of Open Access Journals (Sweden)
A.-M. Boullier
2018-04-01
Full Text Available During the last decade pulverized rocks have been described on outcrops along large active faults and attributed to damage related to a propagating seismic rupture front. Questions remain concerning the maximal lateral distance from the fault plane and maximal depth for dynamic damage to be imprinted in rocks. In order to document these questions, a representative core sample of granodiorite located 51.3 m from the Nojima fault (Japan that was drilled after the Hyogo-ken Nanbu (Kobe earthquake is studied by using electron backscattered diffraction (EBSD and high-resolution X-ray Laue microdiffraction. Although located outside of the Nojima damage fault zone and macroscopically undeformed, the sample shows pervasive microfractures and local fragmentation. These features are attributed to the first stage of seismic activity along the Nojima fault characterized by laumontite as the main sealing mineral. EBSD mapping was used in order to characterize the crystallographic orientation and deformation microstructures in the sample, and X-ray microdiffraction was used to measure elastic strain and residual stresses on each point of the mapped quartz grain. Both methods give consistent results on the crystallographic orientation and show small and short wavelength misorientations associated with laumontite-sealed microfractures and alignments of tiny fluid inclusions. Deformation microstructures in quartz are symptomatic of the semi-brittle faulting regime, in which low-temperature brittle plastic deformation and stress-driven dissolution-deposition processes occur conjointly. This deformation occurred at a 3.7–11.1 km depth interval as indicated by the laumontite stability domain. Residual stresses are calculated from deviatoric elastic strain tensor measured using X-ray Laue microdiffraction using the Hooke's law. The modal value of the von Mises stress distribution is at 100 MPa and the mean at 141 MPa. Such stress values are comparable to
-
Subaru FATS (fault tracking system)
Winegar, Tom W.; Noumaru, Junichi
2000-07-01
The Subaru Telescope requires a fault tracking system to record the problems and questions that staff experience during their work, and the solutions provided by technical experts to these problems and questions. The system records each fault and routes it to a pre-selected 'solution-provider' for each type of fault. The solution provider analyzes the fault and writes a solution that is routed back to the fault reporter and recorded in a 'knowledge-base' for future reference. The specifications of our fault tracking system were unique. (1) Dual language capacity -- Our staff speak both English and Japanese. Our contractors speak Japanese. (2) Heterogeneous computers -- Our computer workstations are a mixture of SPARCstations, Macintosh and Windows computers. (3) Integration with prime contractors -- Mitsubishi and Fujitsu are primary contractors in the construction of the telescope. In many cases, our 'experts' are our contractors. (4) Operator scheduling -- Our operators spend 50% of their work-month operating the telescope, the other 50% is spent working day shift at the base facility in Hilo, or day shift at the summit. We plan for 8 operators, with a frequent rotation. We need to keep all operators informed on the current status of all faults, no matter the operator's location.
-
Ichiba, T.; Kaneki, S.; Hirono, T.; Oohashi, K.; Schuck, B.; Janssen, C.; Schleicher, A.; Toy, V.; Dresen, G.
2017-12-01
The Alpine Fault on New Zealand's South Island is an oblique, dextral strike-slip fault that accommodated the majority of displacement between the Pacific and the Australian Plates and presents the biggest seismic hazard in the region. Along its central segment, the hanging wall comprises greenschist and amphibolite facies Alpine Schists. Exhumation from 35 km depth, along a SE-dipping detachment, lead to mylonitization which was subsequently overprinted by brittle deformation and finally resulted in the fault's 1 km wide damage zone. The geomechanical behavior of a fault is affected by the internal structure of its fault zone. Consequently, studying processes controlling fault zone architecture allows assessing the seismic hazard of a fault. Here we present the results of a combined microstructural (SEM and TEM), mineralogical (XRD) and geochemical (XRF) investigation of outcrop samples originating from several locations along the Alpine Fault, the aim of which is to evaluate the influence of mineralogical composition, alteration and pre-existing fabric on strain localization and to identify the controls on the fault zone architecture, particularly the locus of brittle deformation in P, T and t space. Field observations reveal that the fault's principal slip zone (PSZ) is either a thin (< 1 cm to < 7 cm) layered structure or a relatively thick (10s cm) package lacking a detectable macroscopic fabric. Lithological and related rheological contrasts are widely assumed to govern strain localization. However, our preliminary results suggest that qualitative mineralogical composition has only minor impact on fault zone architecture. Quantities of individual mineral phases differ markedly between fault damage zone and fault core at specific sites, but the quantitative composition of identical structural units such as the fault core, is similar in all samples. This indicates that the degree of strain localization at the Alpine Fault might be controlled by small initial
-
2010-01-01
... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Fault. 831.1402 Section 831.1402...) RETIREMENT Standards for Waiver of Overpayments § 831.1402 Fault. A recipient of an overpayment is without fault if he/she performed no act of commission or omission which resulted in the overpayment. The fact...
-
International Nuclear Information System (INIS)
1981-09-01
Suggestion are made concerning the method of the fault tree analysis, the use of certain symbols in the examination of system failures. This purpose of the fault free analysis is to find logical connections of component or subsystem failures leading to undesirable occurrances. The results of these examinations are part of the system assessment concerning operation and safety. The objectives of the analysis are: systematical identification of all possible failure combinations (causes) leading to a specific undesirable occurrance, finding of reliability parameters such as frequency of failure combinations, frequency of the undesirable occurrance or non-availability of the system when required. The fault tree analysis provides a near and reconstructable documentation of the examination. (orig./HP) [de
-
Fault tolerant operation of switched reluctance machine
Wang, Wei
The energy crisis and environmental challenges have driven industry towards more energy efficient solutions. With nearly 60% of electricity consumed by various electric machines in industry sector, advancement in the efficiency of the electric drive system is of vital importance. Adjustable speed drive system (ASDS) provides excellent speed regulation and dynamic performance as well as dramatically improved system efficiency compared with conventional motors without electronics drives. Industry has witnessed tremendous grow in ASDS applications not only as a driving force but also as an electric auxiliary system for replacing bulky and low efficiency auxiliary hydraulic and mechanical systems. With the vast penetration of ASDS, its fault tolerant operation capability is more widely recognized as an important feature of drive performance especially for aerospace, automotive applications and other industrial drive applications demanding high reliability. The Switched Reluctance Machine (SRM), a low cost, highly reliable electric machine with fault tolerant operation capability, has drawn substantial attention in the past three decades. Nevertheless, SRM is not free of fault. Certain faults such as converter faults, sensor faults, winding shorts, eccentricity and position sensor faults are commonly shared among all ASDS. In this dissertation, a thorough understanding of various faults and their influence on transient and steady state performance of SRM is developed via simulation and experimental study, providing necessary knowledge for fault detection and post fault management. Lumped parameter models are established for fast real time simulation and drive control. Based on the behavior of the faults, a fault detection scheme is developed for the purpose of fast and reliable fault diagnosis. In order to improve the SRM power and torque capacity under faults, the maximum torque per ampere excitation are conceptualized and validated through theoretical analysis and
-
Quaternary faulting in the Tatra Mountains, evidence from cave morphology and fault-slip analysis
Directory of Open Access Journals (Sweden)
Szczygieł Jacek
2015-06-01
Full Text Available Tectonically deformed cave passages in the Tatra Mts (Central Western Carpathians indicate some fault activity during the Quaternary. Displacements occur in the youngest passages of the caves indicating (based on previous U-series dating of speleothems an Eemian or younger age for those faults, and so one tectonic stage. On the basis of stress analysis and geomorphological observations, two different mechanisms are proposed as responsible for the development of these displacements. The first mechanism concerns faults that are located above the valley bottom and at a short distance from the surface, with fault planes oriented sub-parallel to the slopes. The radial, horizontal extension and vertical σ1 which is identical with gravity, indicate that these faults are the result of gravity sliding probably caused by relaxation after incision of valleys, and not directly from tectonic activity. The second mechanism is tilting of the Tatra Mts. The faults operated under WNW-ESE oriented extension with σ1 plunging steeply toward the west. Such a stress field led to normal dip-slip or oblique-slip displacements. The faults are located under the valley bottom and/or opposite or oblique to the slopes. The process involved the pre-existing weakest planes in the rock complex: (i in massive limestone mostly faults and fractures, (ii in thin-bedded limestone mostly inter-bedding planes. Thin-bedded limestones dipping steeply to the south are of particular interest. Tilting toward the N caused the hanging walls to move under the massif and not toward the valley, proving that the cause of these movements was tectonic activity and not gravity.
-
Directory of Open Access Journals (Sweden)
Runxia Guo
2016-01-01
Full Text Available The problem of actuators’ fault diagnosis is pursued for a class of nonlinear control systems that are affected by bounded measurement noise and external disturbances. A novel fault diagnosis algorithm has been proposed by combining the idea of adaptive control theory and the approach of fault detection observer. The asymptotical stability of the fault detection observer is guaranteed by setting the adaptive adjusting law of the unknown fault vector. A theoretically rigorous proof of asymptotical stability has been given. Under the condition that random measurement noise generated by the sensors of control systems and external disturbances exist simultaneously, the designed fault diagnosis algorithm is able to successfully give specific estimated values of state variables and failures rather than just giving a simple fault warning. Moreover, the proposed algorithm is very simple and concise and is easy to be applied to practical engineering. Numerical experiments are carried out to evaluate the performance of the fault diagnosis algorithm. Experimental results show that the proposed diagnostic strategy has a satisfactory estimation effect.
-
Efficient fault-ride-through control strategy of DFIG-based wind turbines during the grid faults
International Nuclear Information System (INIS)
Mohammadi, J.; Afsharnia, S.; Vaez-Zadeh, S.
2014-01-01
Highlights: • A comparative review of DFIGs fault-ride-through improvement approaches is presented. • An efficient control strategy is proposed to improve the FRT capability of DFIG. • The rotor overcurrent, DC-link overvoltage and torque oscillations are decreased. • The RSC, DC-link capacitor and mechanical parts are kept safe during the grid faults. • The DFIG remains connected to the grid during the symmetrical and asymmetrical faults. - Abstract: As the penetration of wind power in electrical power system increases, it is necessary that wind turbines remain connected to the grid and contribute to the system stability during and after the grid faults. This paper proposes an efficient control strategy to improve the fault ride through (FRT) capability of doubly fed induction generator (DFIG) during the symmetrical and asymmetrical grid faults. The proposed scheme consists of active and passive FRT compensators. The active compensator is carried out by determining the rotor current references to reduce the rotor over voltages. The passive compensator is based on rotor current limiter (RCL) that considerably reduces the rotor inrush currents at the instants of occurring and clearing the grid faults with deep sags. By applying the proposed strategy, negative effects of the grid faults in the DFIG system including the rotor over currents, electromagnetic torque oscillations and DC-link over voltage are decreased. The system simulation results confirm the effectiveness of the proposed control strategy
-
International Nuclear Information System (INIS)
Bass, L.; Wynholds, H.W.; Porterfield, W.R.
1975-01-01
Described is an operational system that enables the user, through an intelligent graphics terminal, to construct, modify, analyze, and store fault trees. With this system, complex engineering designs can be analyzed. This paper discusses the system and its capabilities. Included is a brief discussion of fault tree analysis, which represents an aspect of reliability and safety modeling
-
Piccardi, L.
2001-12-01
Beyond the study of historical surface faulting events, this work investigates the possibility, in specific cases, of identifying pre-historical events whose memory survives in myths and legends. The myths of many famous sacred places of the ancient world contain relevant telluric references: "sacred" earthquakes, openings to the Underworld and/or chthonic dragons. Given the strong correspondence with local geological evidence, these myths may be considered as describing natural phenomena. It has been possible in this way to shed light on the geologic origin of famous myths (Piccardi, 1999, 2000 and 2001). Interdisciplinary researches reveal that the origin of several ancient sanctuaries may be linked in particular to peculiar geological phenomena observed on local active faults (like ground shaking and coseismic surface ruptures, gas and flames emissions, strong underground rumours). In many of these sanctuaries the sacred area is laid directly above the active fault. In a few cases, faulting has affected also the archaeological relics, right through the main temple (e.g. Delphi, Cnidus, Hierapolis of Phrygia). As such, the arrangement of the cult site and content of relative myths suggest that specific points along the trace of active faults have been noticed in the past and worshiped as special `sacred' places, most likely interpreted as Hades' Doors. The mythological stratification of most of these sanctuaries dates back to prehistory, and points to a common derivation from the cult of the Mother Goddess (the Lady of the Doors), which was largely widespread since at least 25000 BC. The cult itself was later reconverted into various different divinities, while the `sacred doors' of the Great Goddess and/or the dragons (offspring of Mother Earth and generally regarded as Keepers of the Doors) persisted in more recent mythologies. Piccardi L., 1999: The "Footprints" of the Archangel: Evidence of Early-Medieval Surface Faulting at Monte Sant'Angelo (Gargano, Italy
-
Performance of 'Rocha' and 'Santa Maria' pears as affected by planting density
Directory of Open Access Journals (Sweden)
Mateus da Silveira Pasa
2015-02-01
Full Text Available The objective of this work was to evaluate the performance of 'Rocha' and 'Santa Maria' pears at two planting densities. The experiment was carried out during the 2011/2012, 2012/2013, and 2013/2014 growing seasons, in one-year-old orchards (2011/2012 of 'Rocha' and 'Santa Maria' pears, trained in a central-leader system and planted in two densities (2,000 and 4,000 trees per hectare. The assessed parameters were: production per hectare, production per tree, yield efficiency, number of fruit per tree, average fruit weight, trunk diameter increment, fruit firmness, and soluble solid contents. The cumulative yield of 'Rocha' is greater at the higher planting density, whereas the yield efficiency of 'Santa Maria' increases at the lower planting density, as the trees get more mature. Trunk diameter of 'Rocha' also increases at the lower planting density. However, fruit quality parameters in both cultivars are little affected by planting density.
-
Directory of Open Access Journals (Sweden)
Francisca Rasche
1999-09-01
Full Text Available This is a analysis about the professional literature production at library and information science in Santa Catarina State, Brazil, from 1973 to 1990 and its insertion on the professional education curriculum of the undergraduated library and information science schools of the UFSC [Universidade Federal de Santa Catarina] and UDESC [Universidade do Estado de Santa Catarina], from 1973 to 1993. The tables and graphics present a low insertion of this literature on the curriculum.Análise de pesquisa acerca da produção de literatura por profissionais da informação documentária em Santa Catarina e de sua inserção nos programas e planos de ensino dos cursos de Biblioteconomia da Universidade Federal de Santa Catarina – UFSC – e Universidade do Estado de Santa Catarina – UDESC. Para a análise foram construídas duas bases de dados; a primeira refere-se à identificação da produção no período de 1973 a 1990 e a segunda refere-se à identificação da literatura citada nos programas e planos e ensino de Biblioteconomia das duas Universidades. Os resultados indicam baixa inserção da produção local, de 1973 a 1990, nos programas e planos de ensino ministrados de 1973 a 1993, apontando para um processo educacional reprodutivista e desestimulador da produção escrita.
-
Satsukawa, T.; Lin, A.
2016-12-01
Most of the large intraplate earthquakes which occur as slip on mature active faults induce serious damages, in spite of their relatively small magnitudes comparing to subduction-zone earthquakes. After 1995 Kobe Mw7.2 earthquake, a number of studies have been done to understand the structure, physical properties and dynamic phenomenon of active faults. However, the deformation mechanics and related earthquake generating mechanism in the intraplate active fault zone are still poorly understood. The detailed, multi-scalar structural analysis of faults and of fault rocks has to be the starting point for reconstructing the complex framework of brittle deformation. Here, we present two examples of active fault damage zones: Nojima fault and Arima-Takatsuki active fault zone in the southwest Japan. We perform field investigations, combined with meso-and micro-structural analyses of fault-related rocks, which provide the important information in reconstructing the long-term seismic faulting behavior and tectonic environment. Our study shows that in both sites, damage zone is observed in over 10m, which is composed by the host rocks, foliated and non-foliated cataclasites, fault gouge and fault breccia. The slickenside striations in Asano fault, the splay fault of Nojima fault, indicate a dextral movement sense with some normal components. Whereas, those of Arima-Takatsuki active fault shows a dextral strike-slip fault with minor vertical component. Fault gouges consist of brown-gray matrix of fine grains and composed by several layers from few millimeters to a few decimeters. It implies that slip is repeated during millions of years, as the high concentration and physical interconnectivity of fine-grained minerals in brittle fault rocks produce the fault's intrinsic weakness in the crust. Therefore, faults rarely express only on single, discrete deformation episode, but are the cumulative result of several superimposed slip events.
-
2010-04-01
... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Fault. 255.11 Section 255.11 Employees... § 255.11 Fault. (a) Before recovery of an overpayment may be waived, it must be determined that the overpaid individual was without fault in causing the overpayment. If recovery is sought from other than the...
-
Directory of Open Access Journals (Sweden)
Joel C. da Silva
2007-02-01
Full Text Available O estudo em pauta teve como objetivo analisar a distribuição da quantidade diária de precipitação e do número de dias com chuva e determinar a variação da probabilidade de ocorrência de precipitação diária, durante os meses do ano, em Santa Maria, RS. Os dados de precipitação utilizados foram obtidos durante 36 anos de observação, na Estação Climatológica do 8º Distrito de Meteorologia, localizada na Universidade Federal de Santa Maria (29º 43' 23" de latitude Sul e 53º 43' 15" de longitude Oeste, altitude 95 m. Analisaram-se as seguintes funções de distribuição de probabilidade: gama, Weibull, normal, log-normal e exponencial. As funções que melhor descreveram a distribuição das probabilidades foram gama e Weibull. O maior número de dias com chuva ocorreu durante os meses de inverno porém o volume de precipitação é menor nesses dias, resultando em total mensal semelhante para todos os meses do ano.The objectives of this study were to analyze the distribution of total daily rainfall data and the number of rainy-days, and to determine the probability variation of daily precipitation during the months of the year in Santa Maria, Rio Grande do Sul State, Brazil. A 36-year rainfall database measured at the Climatological Station of 8th District of Meteorology, located in Santa Maria Federal University (29º 43' 23" S and 53º 43' 15" W were used in the study. The following probability distribution functions were tested: gamma, Weibull, normal, lognormal and exponential. The functions that best described the frequency distribution were gamma and Weibull. There were more number of rainy days in the winter, but with less amount of rainfall, resulting in similar monthly total precipitation for the twelve months of the year.
-
The timing of fault motion in Death Valley from Illite Age Analysis of fault gouge
Lynch, E. A.; Haines, S. H.; Van der Pluijm, B.
2014-12-01
We constrained the timing of fluid circulation and associated fault motion in the Death Valley region of the US Basin and Range Province from Illite Age Analysis (IAA) of fault gouge at seven Low-Angle Normal Fault (LANF) exposures in the Black Mountains and Panamint Mountains, and in two nearby areas. 40Ar/39Ar ages of neoformed, illitic clay minerals in these fault zones range from 2.8 Ma to 18.6 Ma, preserving asynchronous fault motion across the region that corresponds to an evolving history of crustal block movements during Neogene extensional deformation. From north to south, along the western side of the Panamint Range, the Mosaic Canyon fault yields an authigenic illite age of 16.9±2.9 Ma, the Emigrant fault has ages of less than 10-12 Ma at Tucki Mountain and Wildrose Canyon, and an age of 3.6±0.17 Ma was obtained for the Panamint Front Range LANF at South Park Canyon. Across Death Valley, along the western side of the Black Mountains, Ar ages of clay minerals are 3.2±3.9 Ma, 12.2±0.13 Ma and 2.8±0.45 Ma for the Amargosa Detachment, the Gregory Peak Fault and the Mormon Point Turtleback detachment, respectively. Complementary analysis of the δH composition of neoformed clays shows a primarily meteoric source for the mineralizing fluids in these LANF zones. The ages fall into two geologic timespans, reflecting activity pulses in the Middle Miocene and in the Upper Pliocene. Activity on both of the range front LANFs does not appear to be localized on any single portion of these fault systems. Middle Miocene fault rock ages of neoformed clays were also obtained in the Ruby Mountains (10.5±1.2 Ma) to the north of the Death Valley region and to the south in the Whipple Mountains (14.3±0.19 Ma). The presence of similar, bracketed times of activity indicate that LANFs in the Death Valley region were tectonically linked, while isotopic signatures indicate that faulting pulses involved surface fluid penetration.
-
Santa Barbara Final Technical Report
Energy Technology Data Exchange (ETDEWEB)
Hacker, Angela; Hansen, Sherman; Watkins, Ashley
2013-11-30
This report serves as the Final Report for Santa Barbara County’s Energy Efficiency and Conservation Block Grant (EECBG) BetterBuildings Neighborhood Program (BBNP) award from the U.S. Department of Energy (DOE). This report explains how DOE BBNP funding was invested to develop robust program infrastructure designed to help property owners complete energy improvements, thereby generating substantial outcomes for the local environment and economy. It provides an overview of program development and design within the grant period, program accomplishments and challenges to date, and a plan for the future sustainability of emPower, the County’s innovative clean energy and building efficiency program. During the grant period, Santa Barbara County’s emPower program primarily targeted 32,000 owner occupied, single family, detached residential homes over 25 years old within the County. In order to help these homeowners and their contractors overcome market barriers to completing residential energy improvements, the program developed and promoted six voluntary, market-based service areas: 1) low cost residential financing (loan loss reserve with two local credit unions), 2) residential rebates, 3) local customer service, 4) expert energy advising, 5) workforce development and training, and 6) marketing, education and outreach. The main goals of the program were to lower building energy use, create jobs and develop a lasting regional building performance market. These services have generated important early outcomes and lessons after the program’s first two years in service. The DOE BBNP funding was extended through October 2014 to enable Santa Barbara County to generate continued outcomes. In fact, funding related to residential financing remains wholly available for the foreseeable future to continue offering Home Upgrade Loans to approximately 1,300 homeowners. The County’s investment of DOE BBNP funding was used to build a lasting, effective, and innovative
-
International Nuclear Information System (INIS)
Kim, B. G.; Kang, H. G.; Kim, H. E.; Seung, P. H.; Kang, H. G.; Lee, S. J.
2012-01-01
With the improvement of digital technologies, digital I and C systems have included more various fault tolerant techniques than conventional analog I and C systems have, in order to increase fault detection and to help the system safely perform the required functions in spite of the presence of faults. So, in the reliability evaluation of digital systems, the fault tolerant techniques (FTTs) and their fault coverage must be considered. To consider the effects of FTTs in a digital system, there have been several studies on the reliability of digital model. Therefore, this research based on literature survey attempts to develop a model to evaluate the plant reliability of the digital plant protection system (DPPS) with fault tolerant techniques considering detection and process characteristics and human errors. Sensitivity analysis is performed to ascertain important variables from the fault management coverage and unavailability based on the proposed model
-
Fault geometry and earthquake mechanics
Directory of Open Access Journals (Sweden)
D. J. Andrews
1994-06-01
Full Text Available Earthquake mechanics may be determined by the geometry of a fault system. Slip on a fractal branching fault surface can explain: 1 regeneration of stress irregularities in an earthquake; 2 the concentration of stress drop in an earthquake into asperities; 3 starting and stopping of earthquake slip at fault junctions, and 4 self-similar scaling of earthquakes. Slip at fault junctions provides a natural realization of barrier and asperity models without appealing to variations of fault strength. Fault systems are observed to have a branching fractal structure, and slip may occur at many fault junctions in an earthquake. Consider the mechanics of slip at one fault junction. In order to avoid a stress singularity of order 1/r, an intersection of faults must be a triple junction and the Burgers vectors on the three fault segments at the junction must sum to zero. In other words, to lowest order the deformation consists of rigid block displacement, which ensures that the local stress due to the dislocations is zero. The elastic dislocation solution, however, ignores the fact that the configuration of the blocks changes at the scale of the displacement. A volume change occurs at the junction; either a void opens or intense local deformation is required to avoid material overlap. The volume change is proportional to the product of the slip increment and the total slip since the formation of the junction. Energy absorbed at the junction, equal to confining pressure times the volume change, is not large enongh to prevent slip at a new junction. The ratio of energy absorbed at a new junction to elastic energy released in an earthquake is no larger than P/µ where P is confining pressure and µ is the shear modulus. At a depth of 10 km this dimensionless ratio has th value P/µ= 0.01. As slip accumulates at a fault junction in a number of earthquakes, the fault segments are displaced such that they no longer meet at a single point. For this reason the
-
Saucier, Francois; Humphreys, Eugene; Weldon, Ray, II
1992-01-01
A model is presented to rationalize the state of stress near a geometrically complex major strike-slip fault. Slip on such a fault creates residual stresses that, with the occurrence of several slip events, can dominate the stress field near the fault. The model is applied to the San Andreas fault near Cajon Pass. The results are consistent with the geological features, seismicity, the existence of left-lateral stress on the Cleghorn fault, and the in situ stress orientation in the scientific well, found to be sinistral when resolved on a plane parallel to the San Andreas fault. It is suggested that the creation of residual stresses caused by slip on a wiggle San Andreas fault is the dominating process there.
-
A Gravity data along LARSE (Los Angeles Regional Seismic Experiment) Line II, Southern California
Wooley, R.J.; Langenheim, V.E.
2001-01-01
The U.S. Geological Survey conducted a detailed gravity study along part of the Los Angeles Regional Seismic Experiment (LARSE) transect across the San Fernando Basin and Transverse Ranges to help characterize the structure underlying this area. 249 gravity measurements were collected along the transect and to augment regional coverage near the profile. An isostatic gravity low of 50-60 mGal reflects the San Fernando-East Ventura basin. Another prominent isostatic gravity with an amplitude of 30 mGal marks the Antelope Valley basin. Gravity highs occur over the Santa Monica Mountains and the Transverse Ranges. The highest isostatic gravity values coincide with outcrops of Pelona schist.
-
Directory of Open Access Journals (Sweden)
Marcos Rodrigues
2008-03-01
Full Text Available Lagoa Santa, a small town in southeastern Brazil where naturalist Peter Lund lived, is regarded nowadays as an important historical site for the biological sciences. From 1847 to 1855, J.T. Reinhardt, hosted by Lund, collected 343 bird species. This material is an outstanding reference for many modern ornithological studies. The present paper reports the occurrence of some rare and threatened birds for the region of Lagoa Santa between 1998 and 2005. In this account I list the Rusty-margined Guan Penelope superciliaris Temminck, 1815; the Roseate Spoonbill Platalea ajaja Linnaeus, 1758; the Maguari Stork Ciconia maguari (Gmelin, 1789; the Wood Stork Mycteria americana Linnaeus, 1758; the Black Hawk-eagle Spizaetus tyrannus (Wied, 1820 and the Turquoise-fronted Parrot Amazona aestiva (Linnaeus, 1758. It is also reported the southernmost record for the Blue-and-yellow Macaw Ara ararauna (Linnaeus, 1758 and the range extension of the Crowned Slaty flycatcher Griseotyrannus aurantioatrocristatus (d'Orbigny and Lafresnaye, 1837. These data can be used as a baseline for studies of colonization and extinction.Lagoa Santa, cidade onde viveu Peter Lund é um dos sítios de maior importância histórica para as ciências biológicas. Durante os anos de 1847 e 1855, J.T. Reinhardt, a convite de Lund, coletou 343 espécies de aves que são hoje referência para vários estudos ornitológicos. O presente artigo relata a ocorrência de algumas aves raras e/ou ameaçadas para a região de Lagoa Santa, entre 1998 e 2005. A lista de espécies inclui a jacupemba Penelope superciliaris Temminck, 1815, o colhereiro Platalea ajaja Linnaeus, 1758, a maguari Ciconia maguari (Gmelin, 1789, a cabeça-seca Mycteria americana Linnaeus, 1758, o gavião-pega-macaco Spizaetus tyrannus (Wied, 1820; e o papagaio-verdadeiro Amazona aestiva (Linnaeus, 1758. Relata-se também a ocorrência mais meridional da arara-canindé Ara ararauna (Linnaeus, 1758, e a expansão da distribui
-
Energy Technology Data Exchange (ETDEWEB)
Aagaard, B T; Graves, R W; Rodgers, A; Brocher, T M; Simpson, R W; Dreger, D; Petersson, N A; Larsen, S C; Ma, S; Jachens, R C
2009-11-04
We simulate long-period (T > 1.0-2.0 s) and broadband (T > 0.1 s) ground motions for 39 scenarios earthquakes (Mw 6.7-7.2) involving the Hayward, Calaveras, and Rodgers Creek faults. For rupture on the Hayward fault we consider the effects of creep on coseismic slip using two different approaches, both of which reduce the ground motions compared with neglecting the influence of creep. Nevertheless, the scenario earthquakes generate strong shaking throughout the San Francisco Bay area with about 50% of the urban area experiencing MMI VII or greater for the magnitude 7.0 scenario events. Long-period simulations of the 2007 Mw 4.18 Oakland and 2007 Mw 4.5 Alum Rock earthquakes show that the USGS Bay Area Velocity Model version 08.3.0 permits simulation of the amplitude and duration of shaking throughout the San Francisco Bay area, with the greatest accuracy in the Santa Clara Valley (San Jose area). The ground motions exhibit a strong sensitivity to the rupture length (or magnitude), hypocenter (or rupture directivity), and slip distribution. The ground motions display a much weaker sensitivity to the rise time and rupture speed. Peak velocities, peak accelerations, and spectral accelerations from the synthetic broadband ground motions are, on average, slightly higher than the Next Generation Attenuation (NGA) ground-motion prediction equations. We attribute at least some of this difference to the relatively narrow width of the Hayward fault ruptures. The simulations suggest that the Spudich and Chiou (2008) directivity corrections to the NGA relations could be improved by including a dependence on the rupture speed and increasing the areal extent of rupture directivity with period. The simulations also indicate that the NGA relations may under-predict amplification in shallow sedimentary basins.
-
Gasser, D.; Mancktelow, N. S.
2009-04-01
The Helvetic nappes in the Swiss Alps form a classic fold-and-thrust belt related to overall NNW-directed transport. In western Switzerland, the plunge of nappe fold axes and the regional distribution of units define a broad depression, the Rawil depression, between the culminations of Aiguilles Rouge massif to the SW and Aar massif to the NE. A compilation of data from the literature establishes that, in addition to thrusts related to nappe stacking, the Rawil depression is cross-cut by four sets of brittle faults: (1) SW-NE striking normal faults that strike parallel to the regional fold axis trend, (2) NW-SE striking normal faults and joints that strike perpendicular to the regional fold axis trend, and (3) WNW-ESE striking normal plus dextral oblique-slip faults as well as (4) WSW-ENE striking normal plus dextral oblique-slip faults that both strike oblique to the regional fold axis trend. We studied in detail a beautifully exposed fault from set 3, the Rezli fault zone (RFZ) in the central Wildhorn nappe. The RFZ is a shallow to moderately-dipping (ca. 30-60˚) fault zone with an oblique-slip displacement vector, combining both dextral and normal components. It must have formed in approximately this orientation, because the local orientation of fold axes corresponds to the regional one, as does the generally vertical orientation of extensional joints and veins associated with the regional fault set 2. The fault zone crosscuts four different lithologies: limestone, intercalated marl and limestone, marl and sandstone, and it has a maximum horizontal dextral offset component of ~300 m and a maximum vertical normal offset component of ~200 m. Its internal architecture strongly depends on the lithology in which it developed. In the limestone, it consists of veins, stylolites, cataclasites and cemented gouge, in the intercalated marls and limestones of anastomosing shear zones, brittle fractures, veins and folds, in the marls of anastomosing shear zones, pressure
-
Stoffer, Philip W.; Messina, Paula
2002-01-01
This guide contains a road log and five stop descriptions for a field trip in the southern Santa Cruz Mountains. The trip officially begins at the boat dock parking area on Alma Bridge Road near the dam of Lexington Reservoir. Stop 1 involves a walk up the Limekiln Trail to examine a large landslide in serpentinite that frequently takes out the trail. Stop 2 is at Miller Point picnic area along the shore of the reservoir where exposures of massive, fractured graywacke sandstone are capped with terrace gravel deposits. Stop 3 is along Highland Way in the Santa Cruz Mountains where large landslides have occasionally force the closure of the road. Stop 4A-C are several closely spaced outcrop areas along Loma Prieta Avenue and Summit-Mt. Madonna Road in the Loma Prieta summit area. A walk to scenic vista points provide opportunity to discuss the evolution of regional landscape along the crest of the Sierra Azul. In addition, a variety of rock types are exposed in the Stop 4 area along a series of road cuts, including Cretaceous age conglomerate, turbidites (consisting of interbedded sandstone and shale), and fossiliferous mudstone. Stop 5 involves returning to the boat dock parking area to examine geology and the placement of the Lexington Dam in the Los Gatos Creek canyon.
-
Fault Analysis in Cryptography
Joye, Marc
2012-01-01
In the 1970s researchers noticed that radioactive particles produced by elements naturally present in packaging material could cause bits to flip in sensitive areas of electronic chips. Research into the effect of cosmic rays on semiconductors, an area of particular interest in the aerospace industry, led to methods of hardening electronic devices designed for harsh environments. Ultimately various mechanisms for fault creation and propagation were discovered, and in particular it was noted that many cryptographic algorithms succumb to so-called fault attacks. Preventing fault attacks without
-
Methods for recognition and segmentation of active fault
International Nuclear Information System (INIS)
Hyun, Chang Hun; Noh, Myung Hyun; Lee, Kieh Hwa; Chang, Tae Woo; Kyung, Jai Bok; Kim, Ki Young
2000-03-01
In order to identify and segment the active faults, the literatures of structural geology, paleoseismology, and geophysical explorations were investigated. The existing structural geological criteria for segmenting active faults were examined. These are mostly based on normal fault systems, thus, the additional criteria are demanded for application to different types of fault systems. Definition of the seismogenic fault, characteristics of fault activity, criteria and study results of fault segmentation, relationship between segmented fault length and maximum displacement, and estimation of seismic risk of segmented faults were examined in paleoseismic study. The history of earthquake such as dynamic pattern of faults, return period, and magnitude of the maximum earthquake originated by fault activity can be revealed by the study. It is confirmed through various case studies that numerous geophysical explorations including electrical resistivity, land seismic, marine seismic, ground-penetrating radar, magnetic, and gravity surveys have been efficiently applied to the recognition and segmentation of active faults
-
Potencial de cultivo da macroalga Kappaphycus alvarezii no litoral de Santa Catarina
Santos, Alex Alves dos
2014-01-01
Tese (doutorado) - Universidade Federal de Santa Catarina, Centro de Ciências Agrárias, Programa de Pós-Graduação em Aqüicultura, Florianópolis, 2014. Os cultivos da macroalga K. alvarezii em monocultivo ou integrados com moluscos (Crassostrea gigas e Perna perna) podem proporcionar benefícios ambientais e econômicos. Este trabalho avaliou o potencial de cultivo da macroalga Kappaphycus alvarezii no parque aquícola de Santa Catarina. O primeiro trabalho identificou a capacidade do parque e...
-
Davatzes, N.C.; Aydin, A.
2005-01-01
We examined the distribution of fault rock and damage zone structures in sandstone and shale along the Moab fault, a basin-scale normal fault with nearly 1 km (0.62 mi) of throw, in southeast Utah. We find that fault rock and damage zone structures vary along strike and dip. Variations are related to changes in fault geometry, faulted slip, lithology, and the mechanism of faulting. In sandstone, we differentiated two structural assemblages: (1) deformation bands, zones of deformation bands, and polished slip surfaces and (2) joints, sheared joints, and breccia. These structural assemblages result from the deformation band-based mechanism and the joint-based mechanism, respectively. Along the Moab fault, where both types of structures are present, joint-based deformation is always younger. Where shale is juxtaposed against the fault, a third faulting mechanism, smearing of shale by ductile deformation and associated shale fault rocks, occurs. Based on the knowledge of these three mechanisms, we projected the distribution of their structural products in three dimensions along idealized fault surfaces and evaluated the potential effect on fluid and hydrocarbon flow. We contend that these mechanisms could be used to facilitate predictions of fault and damage zone structures and their permeability from limited data sets. Copyright ?? 2005 by The American Association of Petroleum Geologists.
-
Advanced cloud fault tolerance system
Sumangali, K.; Benny, Niketa
2017-11-01
Cloud computing has become a prevalent on-demand service on the internet to store, manage and process data. A pitfall that accompanies cloud computing is the failures that can be encountered in the cloud. To overcome these failures, we require a fault tolerance mechanism to abstract faults from users. We have proposed a fault tolerant architecture, which is a combination of proactive and reactive fault tolerance. This architecture essentially increases the reliability and the availability of the cloud. In the future, we would like to compare evaluations of our proposed architecture with existing architectures and further improve it.
-
International Nuclear Information System (INIS)
Shiratsuchi, H.; Yoshida, S.
2009-01-01
It is required that buried high-level radioactive wastes should not be broken directly by faulting in the future. Although a disposal site will be selected in an area where no active faults are present, the possibility of new fault occurrence in the site has to be evaluated. The probability of new fault occurrence is estimated from the frequency of faults which exist in Pliocene and Pleistocene strata distributed beneath 3 large plains in Japan, where a large number of seismic profiles and borehole data are obtained. Estimation of the frequency of faults having occurred and/or reached at shallow depth during Plio-Pleistocene time. The frequency of fault occurrence was estimated by counting the number of faults that exist in Plio-Pleistocene strata that are widely distributed in large plains in Japan. Three plains, Kanto, Nobi and Osaka Plains are selected for this purpose because highly precise geological profiles, which were prepared from numerous geological drillings and geophysical investigations, are available in them. (authors)
-
Biocalcarenites as construction materials in Santa Marina de Aguas Santas Church at Cordoba, Spain
Directory of Open Access Journals (Sweden)
Meroño, J. E.
2009-03-01
Full Text Available This study consisted in characterizing the materials used to build Santa Marina de Aguas Santas Church at Cordoba and locating the original quarries. The techniques used in the lithological and chemical characterization included XRD, petrographic microscopy and electron dispersive scanning microscopy. The chemical index of weathering (CIW was used to quantify the state of stone decay. The lithology and different types of alterations observed were mapped. A comparison of the material on the building to ancient quarries identified “Naranjo” as the possible site where the stone was originally quarried.Para la caracterización litológica y determinación del grado de alteración de los materiales pétreos se han empleado las siguientes técnicas: difracción de rayos X (método del polvo, microscopía petrográfica (sobre lámina delgada y microscopía de barrido con EDS (energía dispersiva de rayos X, para determinar la composición química. El estado de degradación del material pétreo se ha cuantificado a partir del índice químico de alteración (CIW. Se han realizado cartografías sobre la fachada oeste: a de las litologías presentes y b de los diferentes tipos de alteración observados. La comparación de muestras del edificio con las de antiguas canteras ha permitido identificar la del Naranjo como la posible cantera de origen.
-
da Região Oeste de Santa Catarina
Directory of Open Access Journals (Sweden)
Valdir F. Denardin
2005-01-01
Full Text Available The agricultural activity developed in the western region of the state of Santa Catarina generates wealth on the one hand, but on the other it generates environmental degradation and consequently negative impacts for both humans and other forms of life. Considering this, the first objective of the article is to respond how it is possible to internalize the external factors generated by the agricultural sector. In this way two alternate theoretical models for internalization of the external costs are found in literature: Pareto Internalization and Institutional Internalization. The second objective, on the other hand, consists in identifying which type of internalization is best suited for the Western Santa Catarina region under a perspective which is aimed at sustainable development. To respond to this question it was necessary to discuss, theoretically, sustainable development, as well as weak and strong sustainability. Following this, the first option of internalization to be dealt with follows the perspective of a weak sustainability and the second of a strong sustainability.
-
Zielke, Olaf
2015-01-01
Understanding earthquake (EQ) recurrence relies on information about the timing and size of past EQ ruptures along a given fault. Knowledge of a fault\\'s rupture history provides valuable information on its potential future behavior, enabling seismic hazard estimates and loss mitigation. Stratigraphic and geomorphic evidence of faulting is used to constrain the recurrence of surface rupturing EQs. Analysis of the latter data sets culminated during the mid-1980s in the formulation of now classical EQ recurrence models, now routinely used to assess seismic hazard. Within the last decade, Light Detection and Ranging (lidar) surveying technology and other high-resolution data sets became increasingly available to tectono-geomorphic studies, promising to contribute to better-informed models of EQ recurrence and slip-accumulation patterns. After reviewing motivation and background, we outline requirements to successfully reconstruct a fault\\'s offset accumulation pattern from geomorphic evidence. We address sources of uncertainty affecting offset measurement and advocate approaches to minimize them. A number of recent studies focus on single-EQ slip distributions and along-fault slip accumulation patterns. We put them in context with paleoseismic studies along the respective faults by comparing coefficients of variation CV for EQ inter-event time and slip-per-event and find that a) single-event offsets vary over a wide range of length-scales and the sources for offset variability differ with length-scale, b) at fault-segment length-scales, single-event offsets are essentially constant, c) along-fault offset accumulation as resolved in the geomorphic record is dominated by essentially same-size, large offset increments, and d) there is generally no one-to-one correlation between the offset accumulation pattern constrained in the geomorphic record and EQ occurrence as identified in the stratigraphic record, revealing the higher resolution and preservation potential of
-
Tsibanos, V.; Wang, G.
2017-12-01
The Long Point Fault located in Houston Texas is a complex system of normal faults which causes significant damage to urban infrastructure on both private and public property. This case study focuses on the 20-km long fault using high accuracy continuously operating global positioning satellite (GPS) stations to delineate fault movement over five years (2012 - 2017). The Long Point Fault is the longest active fault in the greater Houston area that damages roads, buried pipes, concrete structures and buildings and creates a financial burden for the city of Houston and the residents who live in close vicinity to the fault trace. In order to monitor fault displacement along the surface 11 permanent and continuously operating GPS stations were installed 6 on the hanging wall and 5 on the footwall. This study is an overview of the GPS observations from 2013 to 2017. GPS positions were processed with both relative (double differencing) and absolute Precise Point Positioning (PPP) techniques. The PPP solutions that are referred to IGS08 reference frame were transformed to the Stable Houston Reference Frame (SHRF16). Our results show no considerable horizontal displacements across the fault, but do show uneven vertical displacement attributed to regional subsidence in the range of (5 - 10 mm/yr). This subsidence can be associated to compaction of silty clays in the Chicot and Evangeline aquifers whose water depths are approximately 50m and 80m below the land surface (bls). These levels are below the regional pre-consolidation head that is about 30 to 40m bls. Recent research indicates subsidence will continue to occur until the aquifer levels reach the pre-consolidation head. With further GPS observations both the Long Point Fault and regional land subsidence can be monitored providing important geological data to the Houston community.
-
Lee, Charles; Alena, Richard L.; Robinson, Peter
2004-01-01
We started from ISS fault trees example to migrate to decision trees, presented a method to convert fault trees to decision trees. The method shows that the visualizations of root cause of fault are easier and the tree manipulating becomes more programmatic via available decision tree programs. The visualization of decision trees for the diagnostic shows a format of straight forward and easy understands. For ISS real time fault diagnostic, the status of the systems could be shown by mining the signals through the trees and see where it stops at. The other advantage to use decision trees is that the trees can learn the fault patterns and predict the future fault from the historic data. The learning is not only on the static data sets but also can be online, through accumulating the real time data sets, the decision trees can gain and store faults patterns in the trees and recognize them when they come.
-
Yang, H.; Moresi, L. N.
2017-12-01
The San Andreas fault forms a dominant component of the transform boundary between the Pacific and the North American plate. The density and strength of the complex accretionary margin is very heterogeneous. Based on the density structure of the lithosphere in the SW United States, we utilize the 3D finite element thermomechanical, viscoplastic model (Underworld2) to simulate deformation in the San Andreas Fault system. The purpose of the model is to examine the role of a big bend in the existing geometry. In particular, the big bend of the fault is an initial condition of in our model. We first test the strength of the fault by comparing the surface principle stresses from our numerical model with the in situ tectonic stress. The best fit model indicates the model with extremely weak fault (friction coefficient 200 kg/m3) than surrounding blocks. In contrast, the Mojave block is detected to find that it has lost its mafic lower crust by other geophysical surveys. Our model indicates strong strain localization at the jointer boundary between two blocks, which is an analogue for the Garlock fault. High density lower crust material of the Great Valley tends to under-thrust beneath the Transverse Range near the big bend. This motion is likely to rotate the fault plane from the initial vertical direction to dip to the southwest. For the straight section, north to the big bend, the fault is nearly vertical. The geometry of the fault plane is consistent with field observations.
-
Blisniuk, K.; Fosdick, J. C.; Balco, G.; Stone, J. O.
2017-12-01
This study presents new multi-proxy data to provide an alternative interpretation of the late -to-mid Quaternary evolution, geometry, and slip rate of the southern San Andreas fault zone, comprising of the Garnet Hill, Banning, and Mission Creek fault strands, along its restraining bend near the San Bernardino Mountains and San Gorgonio Pass. Present geologic and geomorphic studies in the region indicate that as the Mission Creek and Banning faults diverge from one another in the southern Indio Hills, the Banning Fault Strand accommodates the majority of lateral displacement across the San Andreas Fault Zone. In this currently favored kinematic model of the southern San Andreas Fault Zone, slip along the Mission Creek Fault Strand decreases significantly northwestward toward the San Gorgonio Pass. Along this restraining bend, the Mission Creek Fault Strand is considered to be inactive since the late -to-mid Quaternary ( 500-150 kya) due to the transfer of plate boundary strain westward to the Banning and Garnet Hills Fault Strands, the Jacinto Fault Zone, and northeastward, to the Eastern California Shear Zone. Here, we present a revised geomorphic interpretation of fault displacement, initial 36Cl/10Be burial ages, sediment provenance data, and detrital geochronology from modern catchments and displaced Quaternary deposits that improve across-fault correlations. We hypothesize that continuous large-scale translation of this structure has occurred throughout its history into the present. Accordingly, the Mission Creek Fault Strand is active and likely a primary plate boundary fault at this latitude.
-
Development of methods for evaluating active faults
Energy Technology Data Exchange (ETDEWEB)
NONE
2013-08-15
The report for long-term evaluation of active faults was published by the Headquarters for Earthquake Research Promotion on Nov. 2010. After occurrence of the 2011 Tohoku-oki earthquake, the safety review guide with regard to geology and ground of site was revised by the Nuclear Safety Commission on Mar. 2012 with scientific knowledges of the earthquake. The Nuclear Regulation Authority established on Sep. 2012 is newly planning the New Safety Design Standard related to Earthquakes and Tsunamis of Light Water Nuclear Power Reactor Facilities. With respect to those guides and standards, our investigations for developing the methods of evaluating active faults are as follows; (1) For better evaluation on activities of offshore fault, we proposed a work flow to date marine terrace (indicator for offshore fault activity) during the last 400,000 years. We also developed the analysis of fault-related fold for evaluating of blind fault. (2) To clarify the activities of active faults without superstratum, we carried out the color analysis of fault gouge and divided the activities into thousand of years and tens of thousands. (3) To reduce uncertainties of fault activities and frequency of earthquakes, we compiled the survey data and possible errors. (4) For improving seismic hazard analysis, we compiled the fault activities of the Yunotake and Itozawa faults, induced by the 2011 Tohoku-oki earthquake. (author)
-
Migración negra en Santa Marta
Directory of Open Access Journals (Sweden)
Josè Luis Vega de Lavalle
2013-11-01
Full Text Available El objetivo de este artículo es dar cuenta de los procesos e inserción urbana de la Gente Negra se ha instalado en Santa Marta, los cuales han llegado a partir de la década de los años ochenta a en el sector turístico de esta ciudad.
-
Methodology for Designing Fault-Protection Software
Barltrop, Kevin; Levison, Jeffrey; Kan, Edwin
2006-01-01
A document describes a methodology for designing fault-protection (FP) software for autonomous spacecraft. The methodology embodies and extends established engineering practices in the technical discipline of Fault Detection, Diagnosis, Mitigation, and Recovery; and has been successfully implemented in the Deep Impact Spacecraft, a NASA Discovery mission. Based on established concepts of Fault Monitors and Responses, this FP methodology extends the notion of Opinion, Symptom, Alarm (aka Fault), and Response with numerous new notions, sub-notions, software constructs, and logic and timing gates. For example, Monitor generates a RawOpinion, which graduates into Opinion, categorized into no-opinion, acceptable, or unacceptable opinion. RaiseSymptom, ForceSymptom, and ClearSymptom govern the establishment and then mapping to an Alarm (aka Fault). Local Response is distinguished from FP System Response. A 1-to-n and n-to- 1 mapping is established among Monitors, Symptoms, and Responses. Responses are categorized by device versus by function. Responses operate in tiers, where the early tiers attempt to resolve the Fault in a localized step-by-step fashion, relegating more system-level response to later tier(s). Recovery actions are gated by epoch recovery timing, enabling strategy, urgency, MaxRetry gate, hardware availability, hazardous versus ordinary fault, and many other priority gates. This methodology is systematic, logical, and uses multiple linked tables, parameter files, and recovery command sequences. The credibility of the FP design is proven via a fault-tree analysis "top-down" approach, and a functional fault-mode-effects-and-analysis via "bottoms-up" approach. Via this process, the mitigation and recovery strategy(s) per Fault Containment Region scope (width versus depth) the FP architecture.
-
Qualidade de sementes de Lolium multiflorum tetraploide comercializadas em Santa Catarina
Directory of Open Access Journals (Sweden)
Ricardo Miotto Ternus
2017-02-01
Full Text Available Na região Sul do Brasil, no período do inverno o azevém (Lolium multiflorum Lam se torna fundamental para a formação de pastagens. No entanto, o uso e a comercialização de sementes de azevém tetraploide têm crescido em relação aos diploides, devido, principalmente, a qualidade superior de suas sementes. O objetivo do trabalho foi avaliar a qualidade das sementes de azevém tetraploide, comercializadas no Estado de Santa Catarina. Foram utilizados seis lotes de sementes de azevém tetraploide da cultivar Barjumbo, oriundos de diferentes estabelecimentos comerciais do Estado de Santa Catarina. Cada lote de semente foi obtido a partir de coleta oficial. Buscaram-se lotes de sementes da categoria certificada, sendo dois lotes de cada país produtor (Argentina, Brasil e Uruguai. Avaliou-se a qualidade física e fisiológica a partir dos testes de pureza física, massa de mil sementes, teste de germinação, primeira contagem de germinação, comprimento da parte aérea e da raiz e massa seca da área e da raiz. Os resultados demonstram que 100% dos lotes analisados atendem os padrões legais de pureza física e germinação para a comercialização de sementes, independente da origem. Para o teste de germinação os resultados obtidos foram 27% superiores ao padrão legal. Os lotes de sementes de azevém tetraploides nacionais comercializados em Santa Catarina, mesmo apresentando-se dentro dos padrões legais para os testes de pureza física e germinação, apresentaram menor vigor quando comparados aos lotes oriundos da Argentina e Uruguai.Quality of Lolium multiflorum tetraploide seeds marketed in Santa CatarinaAbstract: In the southern region of Brazil, during the winter period ryegrass becomes essential for pasture formation. The use and commercialization of tetraploid ryegrass seeds has grown in relation to diploids, mainly due to the superior quality of their seeds. The objective of this work was to evaluate the quality of tetraploid
-
International Nuclear Information System (INIS)
Wang, Han; Song, Gangbing
2011-01-01
Fault detection and isolation (FDI) in real-time systems can provide early warnings for faulty sensors and actuator signals to prevent events that lead to catastrophic failures. The main objective of this paper is to develop FDI and fault tolerant control techniques for base isolation systems with magneto-rheological (MR) dampers. Thus, this paper presents a fixed-order FDI filter design procedure based on linear matrix inequalities (LMI). The necessary and sufficient conditions for the existence of a solution for detecting and isolating faults using the H ∞ formulation is provided in the proposed filter design. Furthermore, an FDI-filter-based fuzzy fault tolerant controller (FFTC) for a base isolation structure model was designed to preserve the pre-specified performance of the system in the presence of various unknown faults. Simulation and experimental results demonstrated that the designed filter can successfully detect and isolate faults from displacement sensors and accelerometers while maintaining excellent performance of the base isolation technology under faulty conditions
-
2011-05-31
... the California State Implementation Plan, Santa Barbara County Air Pollution Control District AGENCY... limited disapproval of revisions to the Santa Barbara County Air Pollution Control District (SBCAPCD... BTU/hr and internal combustion engines with a rated brake horse power of 50 or greater. Under...
-
Case-Based Fault Diagnostic System
International Nuclear Information System (INIS)
Mohamed, A.H.
2014-01-01
Nowadays, case-based fault diagnostic (CBFD) systems have become important and widely applied problem solving technologies. They are based on the assumption that “similar faults have similar diagnosis”. On the other hand, CBFD systems still suffer from some limitations. Common ones of them are: (1) failure of CBFD to have the needed diagnosis for the new faults that have no similar cases in the case library. (2) Limited memorization when increasing the number of stored cases in the library. The proposed research introduces incorporating the neural network into the case based system to enable the system to diagnose all the faults. Neural networks have proved their success in the classification and diagnosis problems. The suggested system uses the neural network to diagnose the new faults (cases) that cannot be diagnosed by the traditional CBR diagnostic system. Besides, the proposed system can use the another neural network to control adding and deleting the cases in the library to manage the size of the cases in the case library. However, the suggested system has improved the performance of the case based fault diagnostic system when applied for the motor rolling bearing as a case of study
-
Passive fault current limiting device
Evans, Daniel J.; Cha, Yung S.
1999-01-01
A passive current limiting device and isolator is particularly adapted for use at high power levels for limiting excessive currents in a circuit in a fault condition such as an electrical short. The current limiting device comprises a magnetic core wound with two magnetically opposed, parallel connected coils of copper, a high temperature superconductor or other electrically conducting material, and a fault element connected in series with one of the coils. Under normal operating conditions, the magnetic flux density produced by the two coils cancel each other. Under a fault condition, the fault element is triggered to cause an imbalance in the magnetic flux density between the two coils which results in an increase in the impedance in the coils. While the fault element may be a separate current limiter, switch, fuse, bimetal strip or the like, it preferably is a superconductor current limiter conducting one-half of the current load compared to the same limiter wired to carry the total current of the circuit. The major voltage during a fault condition is in the coils wound on the common core in a preferred embodiment.
-
The evolving fresh market berry industry in Santa Cruz and Monterey counties
Directory of Open Access Journals (Sweden)
Laura Tourte
2016-08-01
Full Text Available The fresh market berry industry in Santa Cruz and Monterey counties has contributed significantly to the agricultural vibrancy of the two counties and the state of California. Dramatic growth in strawberry, raspberry and blackberry production has been documented over the last 50 years, and most notably since the 1980s. Factors influencing this growth include innovations in agricultural practices and heightened consumer demand. Here, we review the historical context for the berry industry in Santa Cruz and Monterey counties. Organic production, production economics and challenges for the future are also discussed.
-
Zhao, Kai; Song, Yongduan; Shen, Zhixi
2018-02-01
In this paper, a neuroadaptive fault-tolerant tracking control method is proposed for a class of time-delay pure-feedback systems in the presence of external disturbances and actuation faults. The proposed controller can achieve prescribed transient and steady-state performance, despite uncertain time delays and output constraints as well as actuation faults. By combining a tangent barrier Lyapunov-Krasovskii function with the dynamic surface control technique, the neural network unit in the developed control scheme is able to take its action from the very beginning and play its learning/approximating role safely during the entire system operational envelope, leading to enhanced control performance without the danger of violating compact set precondition. Furthermore, prescribed transient performance and output constraints are strictly ensured in the presence of nonaffine uncertainties, external disturbances, and undetectable actuation faults. The control strategy is also validated by numerical simulation.
-
Schuba, C. Nur; Gray, Gary G.; Morgan, Julia K.; Sawyer, Dale S.; Shillington, Donna J.; Reston, Tim J.; Bull, Jonathan M.; Jordan, Brian E.
2018-06-01
A new 3-D seismic reflection volume over the Galicia margin continent-ocean transition zone provides an unprecedented view of the prominent S-reflector detachment fault that underlies the outer part of the margin. This volume images the fault's structure from breakaway to termination. The filtered time-structure map of the S-reflector shows coherent corrugations parallel to the expected paleo-extension directions with an average azimuth of 107°. These corrugations maintain their orientations, wavelengths and amplitudes where overlying faults sole into the S-reflector, suggesting that the parts of the detachment fault containing multiple crustal blocks may have slipped as discrete units during its late stages. Another interface above the S-reflector, here named S‧, is identified and interpreted as the upper boundary of the fault zone associated with the detachment fault. This layer, named the S-interval, thickens by tens of meters from SE to NW in the direction of transport. Localized thick accumulations also occur near overlying fault intersections, suggesting either non-uniform fault rock production, or redistribution of fault rock during slip. These observations have important implications for understanding how detachment faults form and evolve over time. 3-D seismic reflection imaging has enabled unique insights into fault slip history, fault rock production and redistribution.
-
Active fault detection in MIMO systems
DEFF Research Database (Denmark)
Niemann, Hans Henrik; Poulsen, Niels Kjølstad
2014-01-01
The focus in this paper is on active fault detection (AFD) for MIMO systems with parametric faults. The problem of design of auxiliary inputs with respect to detection of parametric faults is investigated. An analysis of the design of auxiliary inputs is given based on analytic transfer functions...... from auxiliary input to residual outputs. The analysis is based on a singular value decomposition of these transfer functions Based on this analysis, it is possible to design auxiliary input as well as design of the associated residual vector with respect to every single parametric fault in the system...... such that it is possible to detect these faults....
-
Computer aided construction of fault tree
International Nuclear Information System (INIS)
Kovacs, Z.
1982-01-01
Computer code CAT for the automatic construction of the fault tree is briefly described. Code CAT makes possible simple modelling of components using decision tables, it accelerates the fault tree construction process, constructs fault trees of different complexity, and is capable of harmonized co-operation with programs PREPandKITT 1,2 for fault tree analysis. The efficiency of program CAT and thus the accuracy and completeness of fault trees constructed significantly depends on the compilation and sophistication of decision tables. Currently, program CAT is used in co-operation with programs PREPandKITT 1,2 in reliability analyses of nuclear power plant systems. (B.S.)
-
International Nuclear Information System (INIS)
Nakanishi, Tatsuya; Mino, Kazuo; Ogasawara, Hiroshi; Katsura, Ikuo
1999-01-01
Major active faults generally consist of systems of a number of fractures with various dimensions, and contain a lot of ground water. Rn gas, moving with underground water, tends to accumulate along faults and emit γ-ray while it decays down to Pb through Bi. Therefore, it has been shown by a number of works that γ-ray intensity is generally high near the core of the major active fault and the γ-ray survey is one of the effective methods to look for the core of the major active fault. However, around the area near the tips of faults, a number of complicated sub-fault systems and the corresponding complicated geological structures are often seen and it has not been investigated well about what can be the relationship between the intensity distribution of γ-ray and the fault systems. In order to investigate the relationship in an area near the tips of major faults well, therefore, we carried out the γ-ray survey at about 1,100 sites in an area of about 2 km x 2 km that has the tips of the two major right lateral faults with significant thrusting components. We also investigated the lineaments by using the topographic map published in 1895 when artificial construction was seldom seen in the area and we can easily see the natural topography. In addition, we carried out the γ-ray survey in an area far from the fault tip to compare with the results in the area with the fault tips. Then: (1) we reconfirmed that in the case of the middle of the major active fault, γ-ray intensity is high in the limited area just adjacent to the core of the fault. (2) However, we found that in the case of the tip of the major active fault, high γ-ray intensity is seen in much wider area with clear lineaments that is inferred to be developed associated with the movement of the major faults. (author)
-
Bird, P.
2010-12-01
The hope expressed in the title question above can be contradicted in 5 ways, listed below. To summarize, an earthquake rupture can be larger than anticipated either because the fault system has not been fully mapped, or because the rupture is not limited to the pre-existing fault network. 1. Geologic mapping of faults is always incomplete due to four limitations: (a) Map-scale limitation: Faults below a certain (scale-dependent) apparent offset are omitted; (b) Field-time limitation: The most obvious fault(s) get(s) the most attention; (c) Outcrop limitation: You can't map what you can't see; and (d) Lithologic-contrast limitation: Intra-formation faults can be tough to map, so they are often assumed to be minor and omitted. If mapping is incomplete, fault traces may be longer and/or better-connected than we realize. 2. Fault trace “lengths” are unreliable guides to maximum magnitude. Fault networks have multiply-branching, quasi-fractal shapes, so fault “length” may be meaningless. Naming conventions for main strands are unclear, and rarely reviewed. Gaps due to Quaternary alluvial cover may not reflect deeper seismogenic structure. Mapped kinks and other “segment boundary asperities” may be only shallow structures. Also, some recent earthquakes have jumped and linked “separate” faults (Landers, California 1992; Denali, Alaska, 2002) [Wesnousky, 2006; Black, 2008]. 3. Distributed faulting (“eventually occurring everywhere”) is predicted by several simple theories: (a) Viscoelastic stress redistribution in plate/microplate interiors concentrates deviatoric stress upward until they fail by faulting; (b) Unstable triple-junctions (e.g., between 3 strike-slip faults) in 2-D plate theory require new faults to form; and (c) Faults which appear to end (on a geologic map) imply distributed permanent deformation. This means that all fault networks evolve and that even a perfect fault map would be incomplete for future ruptures. 4. A recent attempt
-
Physiological quality of soybean seeds produced in four edaphoclimatic regions of Santa Catarina
Frandoloso,Volmir; Meneghello,Géri Eduardo; André,Maria Ângela; Deuner,Cristiane; Menegaz,Winicius
2015-01-01
Abstract:The production of soybeans in the state of Santa Catarina is quite significant in the national context, since the state is recognized for producing seeds with high standards of physiological quality, due to the use of modern technologies and favorable climatic conditions. The aim of this study was to evaluate the physiological quality of soybean seeds produced by major companies in the state of Santa Catarina, analyzed in three seasons: harvesting (reception at UBS), after processing...
-
Merifield, P. M. (Principal Investigator); Lamar, D. L.; Gazley, C., Jr.; Lamar, J. V.; Stratton, R. H.
1976-01-01
The author has identified the following significant results. Four previously unknown faults were discovered in basement terrane of the Peninsular Ranges. These have been named the San Ysidro Creek fault, Thing Valley fault, Canyon City fault, and Warren Canyon fault. In addition fault gouge and breccia were recognized along the San Diego River fault. Study of features on Skylab imagery and review of geologic and seismic data suggest that the risk of a damaging earthquake is greater along the northwestern portion of the Elsinore fault than along the southeastern portion. Physiographic indicators of active faulting along the Garlock fault identifiable in Skylab imagery include scarps, linear ridges, shutter ridges, faceted ridges, linear valleys, undrained depressions and offset drainage. The following previously unrecognized fault segments are postulated for the Salton Trough Area: (1) An extension of a previously known fault in the San Andreas fault set located southeast of the Salton Sea; (2) An extension of the active San Jacinto fault zone along a tonal change in cultivated fields across Mexicali Valley ( the tonal change may represent different soil conditions along opposite sides of a fault). For the Skylab and LANDSAT images studied, pseudocolor transformations offer no advantages over the original images in the recognition of faults in Skylab and LANDSAT images. Alluvial deposits of different ages, a marble unit and iron oxide gossans of the Mojave Mining District are more readily differentiated on images prepared from ratios of individual bands of the S-192 multispectral scanner data. The San Andreas fault was also made more distinct in the 8/2 and 9/2 band ratios by enhancement of vegetation differences on opposite sides of the fault. Preliminary analysis indicates a significant earth resources potential for the discrimination of soil and rock types, including mineral alteration zones. This application should be actively pursued.
-
DEFF Research Database (Denmark)
Odgaard, Peter Fogh; Sardi, Hector Eloy Sanchez; Escobet, Teressa
2015-01-01
tolerant control of wind turbines using a benchmark model. In this paper, the fault diagnosis scheme is improved and integrated with a fault accommodation scheme which enables and disables the individual pitch algorithm based on the fault detection. In this way, the blade and tower loads are not increased...
-
Stratification of the state of Santa Catarina in macro-environments for bean cultivation
Directory of Open Access Journals (Sweden)
Juliano Garcia Bertoldo
2009-01-01
Full Text Available The purpose of this study was to suggest a division of the State of Santa Catarina in macro-environments forexperimentation and bean production. Data of the traits grain yield and plant cycle were evaluated in 10 common beangenotypes grown in nine environments. The data were submitted to the Student-Newman Keuls test, to detect differencesbetween environments, and the Best Linear Unbiased Prediction, to predict the environmental values. The results showed: (adifferences between the regions of Santa Catarina for the traits grain yield and plant cycle, which had a significant positivecorrelation of 0.26 (b Based on the genotypes and environments studied the state can be divided in two macro-environments(MA1 and MA2 and four micro-environments (MI1, MI2, MI3 and MI4. The state of Santa Catarina may be roughly dividedin at least two macro-environments for the recommendation of new cultivars.
-
A Santa Sé e a Conferência de Helsinque
Directory of Open Access Journals (Sweden)
Virgílio Caixeta Arraes
2011-02-01
Full Text Available A presente exposição busca, brevemente, estudar a atuação da Santa Sé durante a Conferência de Helsinque e analisar a diplomacia pontifica durante esse período da Guerra Fria.
-
Sakran, Shawky; Said, Said Mohamed
2018-02-01
Detailed surface geological mapping and subsurface seismic interpretation have been integrated to unravel the structural style and kinematic history of the Nubian Fault System (NFS). The NFS consists of several E-W Principal Deformation Zones (PDZs) (e.g. Kalabsha fault). Each PDZ is defined by spectacular E-W, WNW and ENE dextral strike-slip faults, NNE sinistral strike-slip faults, NE to ENE folds, and NNW normal faults. Each fault zone has typical self-similar strike-slip architecture comprising multi-scale fault segments. Several multi-scale uplifts and basins were developed at the step-over zones between parallel strike-slip fault segments as a result of local extension or contraction. The NNE faults consist of right-stepping sinistral strike-slip fault segments (e.g. Sin El Kiddab fault). The NNE sinistral faults extend for long distances ranging from 30 to 100 kms and cut one or two E-W PDZs. Two nearly perpendicular strike-slip tectonic regimes are recognized in the NFS; an inactive E-W Late Cretaceous - Early Cenozoic dextral transpression and an active NNE sinistral shear.
-
International Nuclear Information System (INIS)
Masoudifar, M.; AghaAmini, M.
2001-01-01
Today the fault diagnostic of the rotating machinery based on the vibration analysis is an effective method in designing predictive maintenance programs. In this method, vibration level of the turbines is monitored and if it is higher than the allowable limit, vibrational data will be analyzed and the growing faults will be detected. But because of the high complexity of the system monitoring, the interpretation of the measured data is more difficult. Therefore, design of the fault diagnostic expert systems by using the expert's technical experiences and knowledge; seem to be the best solution. In this paper,at first several common faults in turbines are studied and the how applying the neural networks to interpret the vibrational data for fault diagnostic is explained
-
El registro biológico humano de la costa meridional de Santa Cruz
Directory of Open Access Journals (Sweden)
Suby, Jorge A.
2009-01-01
Full Text Available La costa patagónica constituye un sector de riesgo para el registro arqueológico, asociado a factores naturales y antrópicos. Al mismo tiempo, la conservación de las colecciones bioarqueológicas, destacándose la pérdida de restos óseos e información asociada por escasez de recursos, desconocimiento o falta de atención especializada, representa escenarios de riesgo para el registro. Una de las áreas para las cuales no se dispone hasta el momento de información bioarqueológica es la región que comprende la costa meridional de la provincia de Santa Cruz. Considerando esta ausencia de información, el objetivo de este trabajo es presentar y discutir los primeros resultados sobre restos óseos humanos hallados en la región costera próxima a la desembocadura del Río Santa Cruz (Santa Cruz, Argentina. Los estudios incluyen el análisis de las situaciones de hallazgo y riesgo de los restos recuperados en acciones de rescate, el reconocimiento y puesta en valor de materiales depositados en el Museo Regional "Carlos Borgialli" (Puerto Santa Cruz, Santa Cruz, Argentina y estudios paleopatológicos. Al mismo tiempo se informan y analizan resultados cronológicos e isotópicos. Los resultados brindan evidencias claras de la ocupación de la región costera al menos durante los últimos 2000 años, consumo de recursos predominantemente terrestres y un estilo de vida que favorece el desarrollo de lesiones articulares, con escasos indicios de estrés sistémico que coinciden con los resultados reportados para la región continental del estrecho de Magallanes.
-
Directory of Open Access Journals (Sweden)
Asdrúbal Bernal
2018-03-01
Full Text Available The three-dimensional growth of fault-related folds is known to be an important process during the development of compressive mountain belts. However, comparatively little is known concerning the manner in which fold growth is expressed in topographic relief and local drainage networks. Here we report results from a coupled kinematic and surface process model of fault-related folding. We consider flexural slip fault-bend and fault-propagation folds that grow in both the transport and strike directions, linked to a surface process model that includes bedrock channel development and hillslope diffusion. We investigate various modes of fold growth under identical surface process conditions and critically analyse their geomorphic expression. Fold growth results in the development of steep forelimbs and gentler, wider backlimbs resulting in asymmetric drainage basin development (smaller basins on forelimbs, larger basins on backlimbs. However, topographies developed above fault-propagation folds are more symmetric than those developed above fault-bend folds as a result of their different forelimb kinematics. In addition, the surface expression of fault-bend and fault-propagation folds depends both on the slip distribution along the fault and on the style of fold growth. When along-strike plunge is a result of slip events with gently decreasing slip towards the fault tips (with or without lateral propagation, large plunge-panel drainage networks are developed at the expense of backpanel (transport-opposing and forepanel (transport-facing drainage basins. In contrast, if the fold grows as a result of slip events with similar displacements along strike, plunge-panel drainage networks are poorly developed (or are transient features of early fold growth and restricted to lateral fold terminations, particularly when the number of propagation events is small. The absence of large-scale plunge-panel drainage networks in natural examples suggests that the
-
Energy Technology Data Exchange (ETDEWEB)
Roenoe Clausen, O.; Petersen, K.; Korstgaard, A.
1995-12-31
A normal detaching fault in the Norwegian-Danish Basin around the D-1 well (the D-1 faults) has been mapped using seismic sections. The fault has been analysed in detail by constructing backstripped-decompacted sections across the fault, contoured displacement diagrams along the fault, and vertical displacement maps. The result shows that the listric D-1 fault follows the displacement patterns for blind normal faults. Deviations from the ideal displacement pattern is suggested to be caused by salt-movements, which is the main driving mechanisms for the faulting. Zechstein salt moves primarily from the hanging wall to the footwall and is superposed by later minor lateral flow beneath the footwall. Back-stripping of depth-converted and decompacted sections results in an estimation of the salt-surface and the shape of the fault through time. This procedure then enables a simple modelling of the hanging wall deformation using a Chevron model with hanging wall collapse along dipping surfaces. The modelling indicates that the fault follows the salt surface until the Middle Miocene after which the offset on the fault also may be accommodated along the Top Chalk surface. (au) 16 refs.
-
International Nuclear Information System (INIS)
Kim, Suk Joon
2004-02-01
Even though digital systems have numerous advantages such as precise processing of data, enhanced calculation capability over the conventional analog systems, there is a strong restriction on the application of digital systems to the safety systems in nuclear power plants (NPPs). This is because we do not fully understand the reliability of digital systems, and therefore we cannot guarantee the safety of digital systems. But, as the need for introduction of digital systems to safety systems in NPPs increasing, the need for the quantitative analysis on the safety of digital systems is also increasing. NPPs, which are quite conservative in terms of safety, require proving the reliability of digital systems when applied them to the NPPs. Moreover, digital systems which are applied to the NPPs are required to increase the overall safety of NPPs. however, it is very difficult to evaluate the reliability of digital systems because they include the complex fault processing mechanisms at various levels of the systems. Software is another obstacle in reliability assessment of the systems that requires ultra-high reliability. In this work, the fault detection coverage for the digital system is evaluated using simulated fault injection method. The target system is the Local Coincidence Logic (LCL) processor in Digital Plant Protection System (DPPS). However, as the LCL processor is difficult to design equally for evaluating the fault detection coverage, the LCL system has to be simplified. The simulations for evaluating the fault detection coverage of components are performed by dividing into two cases and the failure rates of components are evaluated using MIL-HDBK-217F. Using these results, the fault detection coverage of simplified LCL system is evaluated. In the experiments, heartbeat signals were just emitted at regular interval after executing logic without self-checking algorithm. When faults are injected into the simplified system, fault occurrence can be detected by
-
75 FR 9827 - Proposed Expansion of the Santa Maria Valley Viticultural Area (2008R-287P)
2010-03-04
...,'' by Harry P. Bailey, University of California Press, 1966). The maritime fringe climate derives from... California Press, 1975.) Soils: According to the petition, the current Santa Maria Valley viticultural area... viticultural area in Santa Barbara and San Luis Obispo Counties, California, by 18,790 acres. We designate...
-
Dynamic modeling of gearbox faults: A review
Liang, Xihui; Zuo, Ming J.; Feng, Zhipeng
2018-01-01
Gearbox is widely used in industrial and military applications. Due to high service load, harsh operating conditions or inevitable fatigue, faults may develop in gears. If the gear faults cannot be detected early, the health will continue to degrade, perhaps causing heavy economic loss or even catastrophe. Early fault detection and diagnosis allows properly scheduled shutdowns to prevent catastrophic failure and consequently result in a safer operation and higher cost reduction. Recently, many studies have been done to develop gearbox dynamic models with faults aiming to understand gear fault generation mechanism and then develop effective fault detection and diagnosis methods. This paper focuses on dynamics based gearbox fault modeling, detection and diagnosis. State-of-art and challenges are reviewed and discussed. This detailed literature review limits research results to the following fundamental yet key aspects: gear mesh stiffness evaluation, gearbox damage modeling and fault diagnosis techniques, gearbox transmission path modeling and method validation. In the end, a summary and some research prospects are presented.
-
Directory of Open Access Journals (Sweden)
Fernando Henrique Furlan
2010-07-01
Full Text Available Descreve-se um surto de conidiobolomicose em ovinos no Estado de Santa Catarina. O surto ocorreu entre os meses de dezembro e março de 2006, no município de Santo Amaro da Imperatriz, região litorânea do Estado. A propriedade possuía 75 ovinos da raça Santa Inês e seis desses animais adoeceram. Clinicamente os animais doentes apresentavam dificuldade respiratória, corrimento nasal seroso a mucossanguinolento e, por vezes exolftalmia. Na necropsia verificou-se uma massa amarelada na região etmoidal e adjacências que, às vezes, atingia os linfonodos regionais, cérebro, globo ocular e pleura. Microscopicamente a massa caracterizava-se por infiltrado inflamatório granulomatoso com áreas necróticas associadas a hifas largas pouco ramificadas. Através de exame molecular detectou-se DNA de Conidiobolus lamprauges. Os aspectos clínicos, epidemiológicos, macroscópicos, microscópicos e moleculares caracterizam a conidiobolomicose causada por Conidiobolus lamprauges em ovinos.An outbreak of conidiobolomycosis affecting sheep in the State of Santa Catarina, Southern Brazil is reported. The disease occurred in six Santa Inês breed sheep from a flock of 75 during the rainy season. Common clinical signs were noisy respiration and dyspnea, serous to mucosanguineous nasal discharge and exophthalmus. At necropsy there was a dense yellow mass in the nasopharyngeal area affecting the ethmoidal region, turbinate bones and occasionally limph nodes, central nervous system and pleura. Histopathologycally there was multifocal granulomas whith an eosinophilic necrotic reaction containing ribbon type hyphae similar to zygomycetous fungi. At molecular examination Conidiobolus lamprauges DNA was detected. The clinical, epidemiological, macroscopical, microscopical and molecular aspects characterize conidiobolomycosis caused by Conidiobolus lamprauges in sheep.
-
Stability of fault submitted to fluid injections
Brantut, N.; Passelegue, F. X.; Mitchell, T. M.
2017-12-01
Elevated pore pressure can lead to slip reactivation on pre-existing fractures and faults when the coulomb failure point is reached. From a static point of view, the reactivation of fault submitted to a background stress (τ0) is a function of the peak strength of the fault, i.e. the quasi-static effective friction coefficient (µeff). However, this theory is valid only when the entire fault is affected by fluid pressure, which is not the case in nature, and during human induced-seismicity. In this study, we present new results about the influence of the injection rate on the stability of faults. Experiments were conducted on a saw-cut sample of westerly granite. The experimental fault was 8 cm length. Injections were conducted through a 2 mm diameter hole reaching the fault surface. Experiments were conducted at four different order magnitudes fluid pressure injection rates (from 1 MPa/minute to 1 GPa/minute), in a fault system submitted to 50 and 100 MPa confining pressure. Our results show that the peak fluid pressure leading to slip depends on injection rate. The faster the injection rate, the larger the peak fluid pressure leading to instability. Wave velocity surveys across the fault highlighted that decreasing the injection-rate leads to an increase of size of the fluid pressure perturbation. Our result demonstrate that the stability of the fault is not only a function of the fluid pressure requires to reach the failure criterion, but is mainly a function of the ratio between the length of the fault affected by fluid pressure and the total fault length. In addition, we show that the slip rate increases with the background effective stress and with the intensity of the fluid pressure pertubation, i.e. with the excess shear stress acting on the part of the fault pertubated by fluid injection. Our results suggest that crustal fault can be reactivated by local high fluid overpressures. These results could explain the "large" magnitude human-induced earthquakes
-
Havazli, E.; Wdowinski, S.; Amelung, F.
2017-12-01
The North Anatolian Fault Zone (NAFZ) is one of the most active continental transform faults in the world. A westward migrating earthquake sequence has started in 1939 in Erzincan and the last two events of this sequence occurred in 1999 in Izmit and Duzce manifesting the importance of NAFZ on the seismic hazard potential of the region. NAFZ exhibits slip rates ranging from 14-30 mm/yr along its 1500 km length with a right lateral strike slip characteristic. In the East of the Marmara Sea, the NAFZ splits into two branches. The Gazikoy-Saros segment (Ganos Fault) is the westernmost and onshore segment of the northern branch. The ENE-WSW oriented Ganos Fault is seismically active. It produced a Ms 7.2 earthquake in 1912, which was followed by several large aftershocks, including Ms 6.3 and Ms 6.9 events. Since 1912, the Ganos Fault did not produce any significant earthquakes (> M 5), in contrast to its adjacent segments, which produced 20 M>5 earthquakes, including a M 6.7 event, offshore in Gulf of Saros. Interseismic strain accumulation along the Ganos Fault was assessed from sparse GPS measurements along a single transect located perpendicular to the fault zone, suggesting strain accumulation rate of 20-25 mm/yr. Insofar, InSAR studies, based on C-band data, didn't produce conclusive results due to low coherence over the fault zone area, which is highly vegetated. In this study, we present a detailed interseismic velocity map of the Ganos Fault zone derived from L-band InSAR observations. We use 21 ALOS PALSAR scenes acquired over a 5-year period, from 2007 to 2011. We processed the ALOS data using the PySAR software, which is the University of Miami version of the Small Baseline (SB) method. The L-band observations enabled us to overcome the coherence issue in the study area. Our initial results indicate a maximum velocity of 15 mm/yr across the fault zone. The high spatial resolution of the InSAR-based interseismic velocity map will enable us to better to
-
Ricketts, J. W.; Karlstrom, K. E.; Kelley, S. A.; Priewisch, A.; Crossey, L. J.; Asmerom, Y.; Polyak, V.; Selmi, M.
2011-12-01
The Rio Grande rift provides an excellent laboratory for understanding styles and processes of extensional tectonics, and their driving forces. We apply apatite fission track (AFT) thermochronology, geochronology, fracture analysis, and cross-section restoration to decipher past and present tectonics of the Rio Grande rift. AFT data has been compiled from rift flank uplifts along the Rio Grande rift in an attempt to recognize long wavelength spatial and temporal patterns. AFT ages record time of cooling of rocks below ~110°C and, when cooling is due to exhumation, age elevation traverses can record upward advection of rocks through paleo 110°C isotherms. The relatively passive sides of half-grabens (e.g. Manzanos and Santa Fe Range) preserve Laramide AFT ages ranging from 45-70 Ma, indicating they were cooled during the Laramide Orogeny and have remained cooler than 110°C since then. Rift flanks on the tectonically active sides of half-grabens, (e.g. Sierra Ladrones, Sandias, Taos Range, and Sierra Blanca) have AFT ages that range from 35 Ma to history and its mechanisms. AFT data at Ladron Peak, an active rift flank along the western margin of the Rio Grande rift in central New Mexico, indicates that it was rapidly unroofed between 20-10 Ma. Preliminary apatite helium data gives a similar age vs. elevation trend, but apatites have highly radiogenically damaged lattices and hence have corrected closure temperatures tens of degrees higher than AFT ages. The style of faulting at Ladron Peak is unusual because it is bounded by the anomalously low-angle (~15°) Jeter fault. In order to understand the evolution of faulting in this region, a balanced cross-section was constructed and restored to its pre-rift geometry. Our working hypothesis is that the low angle of the Jeter fault is most adequately explained by a rolling hinge model, where isostatic uplift causes progressive rotation of an initially steep (~60°) normal fault to shallower dips. Thirty km north of
-
Fault diagnosis based on controller modification
DEFF Research Database (Denmark)
Niemann, Hans Henrik
2015-01-01
Detection and isolation of parametric faults in closed-loop systems will be considered in this paper. A major problem is that a feedback controller will in general reduce the effects from variations in the systems including parametric faults on the controlled output from the system. Parametric...... faults can be detected and isolated using active methods, where an auxiliary input is applied. Using active methods for the diagnosis of parametric faults in closed-loop systems, the amplitude of the applied auxiliary input need to be increased to be able to detect and isolate the faults in a reasonable......-parameterization (after Youla, Jabr, Bongiorno and Kucera) for the controller, it is possible to modify the feedback controller with a minor effect on the closed-loop performance in the fault-free case and at the same time optimize the detection and isolation in a faulty case. Controller modification in connection...