WorldWideScience

Sample records for sangyo haikibutsu tekiseika

  1. Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

  2. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region (International Symposium `98); Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan and Asian countries, the optimized treatment of industrial waste is the problem with the economic growth. Border-crossing movement of the waste for promotion of the renewable use is also a problem. Therefore, the International Symposium `98 on the industrial waste problem in the Asian region was held. China, Thailand, the Philippines and Korea were invited to Japan to give lectures. MITI of Japan reported on the present situation of Japan and the cooperation with Asian countries. The industrial circle reported on efforts for environmental protection measures to be taken, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention on recycling activities, Japan`s role in Asia, etc. In the panel discussion, promotion of cooperation for recycling technology and Japan`s support for formulating strategy on the industrial waste were requested to Japan, and the construction of an Asian area network was proposed. Concerning the cooperative system between governments and private companies, it was concluded that it was necessary to discuss it considering the actual state of each country. Importance of recycle and information exchange was realized again. 10 refs., 15 figs., 27 tabs.

  3. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region; Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The International Symposium `98 on the industrial waste problem in the Asian region was held in Tokyo on February 18, 1998. MITI commented on the present situation of the industrial waste problem in Japan and Japan`s environmental tackling toward the Asian region, and also Asian countries (China, the Philippines, Thailand and Korea) made reports. Japan reported on environmental preservation measures taken in the industrial circle, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention (which restricts border-crossing movement of harmful wastes) on recycle activities, Japan`s role in Asia, etc. In the panel discussion, discussions were made on human interchange in the informatization, recycling technology, shortage of personnel concerned with environmental protection, construction of a network in the Asian region and Japan` s role, etc. As to the treatment system for waste, the necessity was recognized of studying systems which meet with actual states of each country. It is also necessary to go on with discussing how the system should be for cooperation between governments and private companies. Importance of the recycle and information exchange was emphasized. 10 refs., 14 figs., 27 tabs.

  4. Fiscal 2000 survey of refuse-fueled power generation introduction technology, etc. Survey of industrial refuse-fueled power generation (Industrial refuse-fueled power generation case study implementation - 1); 2000 nendo chosa haikibutsu hatsuden donyu gijutsu chosa to - Sangyo haikibutsu hatsuden chosa (Sangyo haikibutsu hatsuden case study no jisshi - 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Case studies were conducted of industrial refuse-fueled power generation using plastic waste, paper waste, and wood chips, and the same using the excretions of cattle. In the study of power generation fueled by mixed waste containing plastic waste, 325t/d, 220t/d, and 130t/d incinerators having the lower calorific value of 5,960-6,401 kcal/kg were taken up, and steam conditions, generator output, generating-end efficiency, station service power ratio, sending-end efficiency, etc., were tentatively calculated. As for cost efficiency, a manufacturer's estimate indicated that commercialization would be impossible in all the cases unless the construction cost was cut down. In the study of excretion-fueled power generation, cases were taken up where medium-temperature fermentation proceeded for the excretions of 620-29,853 dairy cows (32-1,576 t/d). A calculation was performed on conditions that the construction cost and maintenance/utility costs were as estimated by the manufacturer, that the excretion treatment and power generation facilities were covered by subsidies, and that personnel expenses of 6-million yen were necessary. It was then found that there would be commercial viability in case the yield was 790t/d or higher. (NEDO)

  5. Achievement report in fiscal 1999 on commissioned research project. 'Model project for facilities to effectively utilize wastes from industrial complexes in Thailand' Project for 1999 Volume 2; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to reuse industrial wastes and effectively utilize them as a petroleum replacing energy resource, and attempt to reduce consumption of fossil fuel in Thailand where increase in discharge of industrial wastes is estimated, a model project for facilities to effectively utilize wastes from industrial complexes has been carried out. This paper reports the achievements in fiscal 1999. Specifically, the project calls for incineration in fluidized bed incinerators of industrial wastes discharged from factories in industrial complexes possessed by the Industrial Estate Authority of Thailand (IEAT), recovery of waste heat from waste heat recovering boilers to generate process steam, which is supplied to the factories in the complexes. The current fiscal year, which is the first current year of the project, has put into order the operations shared by Japan and Thailand, compiled the various procedures and schedules into the form of appendices to the agreement, and executed signing of the agreement. Thereafter, the Japanese side has carried out decision on the specifications of the facilities, the basic designs, the detailed designs of facilities to be arranged by Japan, and the fabrication of some of the devices according to the descriptions of the agreement appendices. The volume 2 summarizes the inspection reports in the referential materials. (NEDO)

  6. FY 1999 report on the results of the contract project 'The model project for facilities for effective utilization of industrial waste at the industrial complex in Thailand.' Separate Volume 4 - FY 1999 project; 1999 nendo seika hokokusho. Tai ni okeru kogyo danchi sangyo haikibutsu yuko riyo setsubi moderu jigyo - 4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of reducing the consumption of fossil fuel by recycling industrial waste for effective use as petroleum substituting energy in Thailand where the amount of industrial waste is expected to increase, a model project on facilities for effective use of industrial waste at the industrial complex was carried out, and the FY 1999 results were reported. Concretely, the industrial waste generated from each plant at the industrial complex owned by IEAT is to be incinerated in fluidized bed incinerator, and the process steam is to be generated by recovering waste heat by waste heat recovery boiler and to be supplied to plants within the complex. In this fiscal year, the first year of the project, the attachment to the agreement was prepared in terms of the allotment of the project work between Japan and Thailand, various kinds of gist, schedules, etc. and signed. After that, the following were conducted at the Japan side according to the attachment to the agreement: determination of the basic specifications for facilities, basic design, detailed design, manufacture of a part of the equipment, etc. Separate Volume 4 included the results of the inspection of the tank, pump, blower, etc. (NEDO)

  7. Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system (industrial refuse derived fuel and gas turbine combined type); Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (sangyo RDF GT fukugogata) jigyoka FS chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    High efficiency power generation, which is useful for promoting the environment-friendly type energy and coordinated community, is investigated by combining a steam turbine power generation system using the PS-RDF (paper sludge-refuse derived fuel) and a gas turbine (GT) combined cycle. Industrialization plan for processing PS in low cost has been made to ensure the profitability by participating the wholesale power supply under the law of electric power industry. This combined system is similar to the so-called super power generation using municipal garbage, but the lower temperature of steam from GT waste heat boilers (WHB) is super-heated by the flue gas from RDF boiler, which is called advanced power generation system (A.S.S.). The total power generation capacity is 149,000 kW, which consists of three 35,000 kW units of GT and one 44,000 kW unit of steam turbine. When comparing the combined system (A.S.S.) and usual one with the independent installation of the RDF steam power generation system and a GT combined cycle, the A.S.S. provides the repowering efficiency of 7,600 kW output with exactly the same quantity of fuel input as usual one. 71 figs., 31 tabs.

  8. Waste management in the world; Sekai no haikibutsu shori

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, M. [The Institute of Public Health, Tokyo (Japan)

    1998-05-15

    This paper describes waste management in the world. Richer countries produce more wastes with their contents diversified. Poorer countries produce less wastes, which will not present problems in terms of quantity and quality if individuals will dispose of them properly. Household and kitchen refuses in developing countries are organic in nature, and contain more water. Refuse collectors using such animals as donkeys and horses are still seen. Cases of performing intermediate treatment such as incineration are few, and land reclamation is the main treatment. Neither soil covering nor mud water prevention measures are taken. Smoke stays in air throughout year due to open dumping and open burning, and foul water seeps out. Scavengers (people who collects valuables from dumps) exist, who recover such resources as metals and plastics to make their living. Some of the countries make kitchen refuses into compost. In industrialized countries, ratio of containers and wrappings is high in refuses, which are collected by mechanical recovery vehicles, and carried to incineration facilities and reclamation areas. Securing reclamation areas is difficult. Resource recovery is in a trend of mechanization. Pollution preventive measures are also taken at high levels by means of waste processing. 2 refs., 2 figs., 2 tabs.

  9. Mercury inclusion a waste processing; Suigin ganyu haikibutsu no shori

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-05

    BNL (Brookhaven National Laboratory) developed process (SPSS) which granularly stabilized the mercury contamination material including the radioactive material. In the SPSS Inc. method, the sulfur similarly is made to react on the mercury with the amalgamation, and mercury sulfide of low vapor pressure is formed at the low solubility. In the new process, in this amalgamation, the dispersion of the fine powder becomes a problem, and the pollutant mixes with 'the sulfur (95%)-dicyclopentadiene (5%) mixture', and it pours in melting post-container heated to 120 degrees C. The possible uniform composition lump fixes mercury and radioisotope as the result. 200 of the EPA standard in the product by the pilot study the 0.5-3ppb mercury which drastically fell below ppb was contained. In addition, BNL has planned the test operation in the commercial. In the future, the processing of a mercury inclusion waste in the radioactive waste disposal authorization facilities will become possible, if the actual/real process is established. (translated by NEDO)

  10. Waste minimization activities in Toyota Motor Corporation; Haikibutsu teigen eno torikumi jokyo

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, S.; Yamamoto, N.; Kurai, H. [Toyota Motor Corp., Aichi (Japan)

    1998-07-01

    Toyota`s waste reduction efforts based on a drive for dealing with the source of waste generation are introduced. For the propulsion of the policy for dealing directly with the origin of waste, it is necessary to convert the existing manufacturing processes that give high priority to product quality and low production cost into environmental impact reduction oriented processes. In particular, conversion of materials into those that are easier to recycle, technology for reducing defective products, technology for the completion of recycling within the process involved, and the simplification of all the processes are mentioned. For the cleaning job in the machining process, a detergent enhanced in oil/water separating capability is developed, and this prolongs doubly the detergent replacement period and decreases the waste liquid to a 1/4 or less of what the conventional method produces. For the handling of foundry sand that is yielded in great quantities, a flow classification system is developed to replace the conventional gravitational classifier, and the reusable coarse-grain sand in the collected dust which occupies approximately 70% of the whole waste is now recovered for reuse. In the vehicle body coating process, a newly-developed robot arm type coating system is developed, which halves the coating waste. 2 refs., 9 figs., 1 tab.

  11. Fiscal 1997 survey report. Basic survey on trends of waste use type production facilities and waste fuel production facilities; 1997 nendo chosa hokokusho. Haikibutsu riyogata seizo shisetsu oyobi haikibutsu nenryo seizo shisetsu doko kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey was made to obtain the basic data for future spread and promotion of No.6 type (waste use type production facilities) and No.7 type (waste fuel production facilities) which were added to the objects having been subsidized since fiscal 1997 under `the environmental harmony type energy community project.` In the former, the kiln in the cement industry and the blast furnace in the steel industry can be extremely large places to receive waste plastic since the facilities are distributed in every area and the treatment capacity is large. However, the effective collection, transportation and sorting of large quantity of waste plastic, especially the problem of removal of vinyl chloride, is a big bottleneck. As to the use of waste plastic using gasification technology, there are no actual results on the commercial basis. That is, however, appropriate for treatment of the waste difficult in treatment, and can be expected of the usage in the chemical industry. In the latter, in the facilities using industrial waste raw materials as fuel, solidification and liquefaction are both operated on a commercial basis. In relation to the solidification and use as fuel of general waste, the treatment of combustion ash is preventing the expansion of use of waste in the industrial field because of a large quantity of chlorine included in the products. 92 refs., 54 figs., 35 tabs.

  12. 1998 report on development of high-efficiency waste power generation technology. 2. Development of waste gasification and ash melting power generation technology; 1998 nendo kokoritsu haikibutsu hatsuden gijutsu kaihatsu seika hokokusho. Haikibutsu gas ka yoyu hatsuden gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In regard to waste gasification and ash melting power generation, a basic test and examination were conducted in fiscal 1998, with a full-scale development test made ready to start. In the development of technology for raising steam temperature, evaluation of high temperature corrosivity of SH materials and development of high-temperature dust removal system were carried out for example, as were development of dechlorination technology for thermal decomposition process and development of ceramic high-temperature air heater. In the development of technology to prevent exhaust gas reheating, preliminary examination was made on denitrification technologies using a catalyst with superior low-temperature activity. In the development of technology to reduce self-heat melting critical calorific value, investigation and basic test were carried out concerning a stable waste feed system, with a pilot test device experimentally manufactured and tested based on the findings. In the development of technology for reducing external fuel input, examination and analysis were performed on pretreatment techniques for waste plastics, with basic data obtained for a waste blowing system project. In addition, the thermal decomposition and combustion characteristics of waste plastics were clarified by the basic test. (NEDO)

  13. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  14. Processing of a PVC waste by the metallic recycling process; Kinzoku no risaikuru purosesu ni yoru PVC haikibutsu no shori

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-05

    Mr. Derek Fray of Cambridge University was PVC '99 conference held in Brighton in the United Kingdom some time ago, and the strip process of tin, zinc, metal of the copper in the iron recycling reported the possibility that the problem of a PVC waste could be solved. Though hydrogen chlorides, carbon dioxide, steam, etc. arise, when PVC burns in the excessive air, they are as the hydrogen chloride with these impurity forms the chlorides with nonferrous metal except for the iron. For example, it becomes possible that it recovers by the condensation by forming the volatile tetrachloride tin, when it deals with the steel plate which coated the tin in 130 degrees C PVC deriving gas. This reaction is the diffusion control in vapor phase, and there is no necessity of putting the object in the shredder. This process can be applied to the case in which there is the polymer coating like the canned food in addition to the tin coating. And, it can be also applied to the removal of zinc from the steel plate that for automobile was galvanized. By the heating of the steel plate, zinc is melted, and it evaporates, and it is recovered as a zinc oxide dust, and dangerous object and problem of the processing occur. In the meantime, in making to be the volatile zinc chloride in about 10 minutes, when it deals with this steel plate with chlorination reagent (chlorine, hydrogen chloride) and excessive air at 750 degrees C, zinc can be removed. It is to electrolyse this zinc chloride in condensation and after the purification, and high-pure zinc oxide and chlorine are got. The person though in Europe, this report has not pulled the interest very much, and it is sure of that this research is realizable in the laboratory level, and it is lamented that the enterprises in which a waste is arising, etc. do not show the interest in present state. (translated by NEDO)

  15. Study on seepage water circulation in landfill waste disposal site. Haikibutsu umetate shobunchi shinshutsusui no kankyo ni kansuru kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Hosomi, M.; Nakasugi, O. (National Institute for Environmental Studies, Tsukuba (Japan))

    1990-10-29

    The report presents a study on the treatment of seepage water discharged from the waste layer in a landfill waste disposal site and on seepage water circulation as a method for accelerating the stabilization of waste in a landfill site. Seepage water circulation is intended to feed seepage water back onto or into the waste layer so that water is distibuted uniformly over the waste layer. Study results show that seepage water circulation can effectively remove those organic substances which are associated with BOD and COD. In Japan, seepage water circulation is mainly performed by spreading water over the landfill site with the aim of reducing the amount of seepage water through evaporation. Circulation also serves to accelerate the generation of gas such as methane and carbon dioxide. Circulation causes a depression, which acts as a total index reflecting not only biological and chemical reactions but also physical processes. It is also found that the acidic fermentation which occurs during the landfill stabilization process can be promoted by properly controlling the pH value. 2 tabs.

  16. Future and present condition of waste treatment facilities for foundry; Chuzo kojo haikibutsu shori setsubi no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Takada, M. [Shinto Kogyo Co. Ltd., Tokyo (Japan)

    1997-12-25

    The current state of waste disposal facilities in foundries is introduced, and the future way that it should be is investigated from the viewpoint of environmental management of manufacturing plants which is shifting from taking countermeasures for environmental conservation to giving priority to environmental conservation. As the methods for waste disposal, there are a case of reusing it to decrease the quantity of waste as far as possible and a case of converting it into valuable material for reuse by other industries as valuable material. In connection with the facilities for decreasing the quantity of generated waste, outlines are given on the recovery system for spilled sand, classifiers (sieve, air classifier), separators (magnetic separator, shot separator), sand reproducing system, humidifier, and granulators (briquette of turning, granulation of dust). As regards future disposal facilities, investigation must be made on the support facility for production so as to reduce waste generation as far as possible, facility which sort generated waste reliably for easy disposal, facility for material recycling, and facility for realizing zero emission. 5 refs., 5 figs., 5 tabs.

  17. JPRS Report, Science & Technology, Japan.

    Science.gov (United States)

    1988-06-25

    14 Jan 88] 101 Earthquake Proofing Demonstrated [GENSHIRYOKU SANGYO SHIMBUN, 14 Jan 88] 103 High-Level Vitrification [GENSHIRYOKU SANGYO...of this medium is only about half that of a medium made of fetal bovine serum. Furthermore, this serum can be produced in large quantities. The...too their employment in such places as the central control room is expected. High-Level Vitrification 43062043 Tokyo GENSHIRYOKU SANGYO SHIMBUN in

  18. Development of high-efficiency wastes-burning electric power generating technology. Volume 1. Report for fiscal 1999; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu 1999 nendo hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper summarizes the achievements of developing a technology to generate electric power at high efficiency by using a combustion furnace that uses general wastes and combustible industrial wastes as fuel to generate high-temperature and high-pressure steam under a stabilized condition. In the developmental research of the combustion furnace, discussions were given on single-pass and double-pass type stalker furnaces, an internal circulation type fluidized bed furnace, and an external circulation type fluidized bed furnace, whereas technological prospects were established on any of them as the combustion furnace. In developing corrosion resistant super heater materials, demonstration tests were performed by using a pilot plant, corrosion mechanisms were elucidated, amount of corrosion in steam generating tubes was discussed, and corrosion life of super heaters was estimated. In developing a technology to reduce environmental load, developmental researches were carried out on a method to treat waste gases by using pulse plasma to have established nearly completely a waste gas treatment system technology. In the demonstration test using the pilot plant, the operation has started from February 1998, generating stably the steam conditions of 500 degrees C and 9.8 MPa, and the smooth operation has continued. (NEDO)

  19. Research report of fiscal 1997. Study on profitability evaluation technique for waste power generation; 1997 nendo chosa hokokusho. Haikibutsu hatsuden ni kansuru keizaisei hyoka shuho no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For diffusion of waste power generation, cost reduction is important. As the profitability evaluation technique for conventional waste power systems, a simple recovery year method, total waste treatment cost method, generation cost method, and evaluation method by accumulated balance sheet are presented along with their principles. For the generation cost method, trial calculation results are presented based on documents reported. From methods for the study in Institute of Applied Energy, some estimation methods of construction cost are presented, and generation cost and profitability evaluation were studied by parametric accumulation method. The profitability was calculated for RDF power systems, and it was clarified that although as a whole this system is more efficient than a simple refuse incineration system, the balance sheet of local governments is dependent on a responsibility range for the facility. In a combined type (super refuse power generation), generally municipalities bear a combustor and boiler, while a prefecture bears generation facilities. Because of large scale generation, the profitability is dependent on a selling price of electricity. 37 refs., 36 figs., 24 tabs.

  20. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  1. World scenario for energy industries (Problems and responses). ; Creating new values in fuels and restructuring the energy industries. Energy sangyo no sekai shinario (kadai to taio). ; Nenryo no shinkachi no sozo to energy sangyo no saikochiku

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-05

    This paper describes the following matters on the future images of the energy industries: The following two scenarios may be drawn on the future world order from the changing signs seen in three regions of the geopolitical factors, international economies, and environmental problems : One is the world of mercantilism where several blocks are formed, with the economic power of each block regarded as the ultimate purpose. Trades within a block are executed according to the market principles, while trades between the blocks are operated politically. The energy industries in this case should face incessantly new rules and market restructuring. Another scenario is a coordination maintaining world where international cooperations are preferred to the common benefits. Affluent nations determine the necessity of global systems for trade and environmental problems, while less affluent nations are forced to coordinate with these determinations. In this case, the energy industries will face directly a cost rise associated with conversions to cleaner fuels and industrial restructuring. 8 figs.

  2. Polymer-based matrix composites in general industries. Ippan sangyo bun'ya ni okeru kobunshiki fukugo zairyo

    Energy Technology Data Exchange (ETDEWEB)

    Kenmochi, K. (National Institute of Materials and Chemical Research, Tsukuba (Japan))

    1994-02-15

    This paper summarizes the course of development of polymer-based matrix composites (PMC) begun in the 1950's, their future problems, and prospects. Because of PMC being a petroleum product, the changing period before and after the first and second oil crises (1974-1983) has seen even a negative growth from the declined product price out of increased material cost. However, the materials have been continuing expansion in such applications year after year for two decades since then as plant, marine vessel, and housing materials. The course of their development to date has included such proliferation impeding factors as unproved reliability, high production cost, and legal regulations because of being new materials. However, the ardent technical development efforts having produced a number of products including hybrid FRP, particularly the fundamental technology development studies sponsored by the Ministry of International Trade and Industry, have improved properties and reliability and contributed largely to expanding practical applications. Sought in different functions expected in PMC in the future would be application of bionic designs, transfer from functional quality to sensitive quality, and development of material recycling techniques. 8 refs., 11 figs., 1 tab.

  3. Deregulation of LP gas industry and future problems; LP gas sangyo no kisei kanwa to kongo no kadai

    Energy Technology Data Exchange (ETDEWEB)

    Mori, T.; Okaya, Y.; Kaneko, Y. [The Institute of Energy Economics, Tokyo (Japan)

    1997-01-30

    This paper describes deregulation of LP gas industry and future problems. The conventional regulation in LP gas industry aims at the security of safety of LP gas and the proper business. The deregulation consists of the release of social regulation of safety and the reconsideration based on the introduction of competitive principle. The law was enforced from April, 1997. This law includes the proper response to advancement of safety technology, addition of self-safety incentive, open information to general consumers, and simplification of procedures. Safety and sales are separated through an establishment of safety organization. License system of sales is changed to registration system for easier participation. The current LP gas industry is loosing its competitive force due to its higher cost compared with the competitive fuels. The demand stays in a low level. There are a lot of small-scale retailers, and the enhancement of them is a problem. It is required to improve the productivity by the expansion of scale through cooperation and integration, to reduce the cost by rationalization through bulk supply and centralized monitoring, and to realize the diversification of management.

  4. Report on investigation in fiscal 2000 of industrial technology information; 2000 nendo sangyo gijutsu joho chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Pursuing the measures for how the national research institutions in Japan who have been made into independent administrative corporations should be positioned in maintaining and developing the industrial strength, investigations were performed with the points focused on measures taken in the United States to improve research environment, and the ways the national research institutions should be. The investigation results were summarized on the following four areas: 1) transition of research and development policies, 2) on the national research organizations, 3) structuring of database for researchers in universities and national research organizations, and 4) future challenges and suggestions. Item 1) has put the subject into order of the history of establishing legislations related to the U.S. technological policies, measures to promote research and development, budgetary management, grants, and preferential treatment. In Item 2), visits and investigations were executed on government-owned, government-operated laboratories and government-owned, contractor-operated laboratories whose operation patterns are different with each other. The results were put into order of institutions, roles, personnel systems, activation measures, joint research institutions, and finance. In Item 3), a data list was prepared on researchers relative to advanced technology programs contributing greatly to enhancing the competitive edge of U.S. corporations. (NEDO)

  5. Recent trend on the restructuring of the Taiwan petroleum industry; Taiwan sekiyu sangyo no seihen wo meguru saikin no doko

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, S. [The Institute of Energy Economics, Japan, Tokyo (Japan)

    1999-12-01

    The effect of the Asian economic crisis to the Taiwan economy was relatively low, and oil demands in 1998 showed firm elongation. In the Taiwanese petroleum industry, the retail sale market has already been opened in 1987, but the trade and purification department of the petroleum products are monopolized by the national petroleum company, Chinese Petroleum Corp. (CPC). However, at the 1999 year-end, in addition, deregulation of the petroleum industry, market liberalization and privatization of CPC have been promoted together with the economic liberalization recently in the said country, and it becomes that Taiwan plastic does the new entry in the purification department. And, the import of a part of products is also liberalized on the import of the products of petroleum. However, on the CPC privatization, there is the contrariety of the Diet and many labor unions, and the execution of the plan has been postponed. In this paper, the trend of economic performance, the trend of oil demands, present state of the petroleum refining facilities, deregulation situation, foreign capital participation situation and restructuring of the petroleum industry in Taiwan are described. (NEDO)

  6. Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system using CSD and other wastes; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (CSD nado haikibutsu riyo) jigyoka FS chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report presents the feasibility of enterprise on power generation by thermal recycle and selling power together with volume reduction, de-harming (de-toxification) and stabilization of the shredder dust. Contents of the study include the investigation of generation amount of car shredder dust (CSD) and its properties, trial design of high efficiency power generation facilities, selection of boiler tube materials, incineration test with a melting kiln test plant, disposal and effective use of melted slag and fly ash, and environmental impact assessment. The capacity of waste disposal in the trial design contains 1,140 ton/day of shredder dust, 60 ton/day of waste plastics, sludge and waste paper, and 130 ton/day of waste oil. Melting kiln with secondary combustion chamber was adopted as the incineration type. The high temperature and high pressure waste heat boiler with an extraction condensing turbine was adopted as the waste heat recovery and power generation type. Stable combustion was confirmed from the results using a test plant. According to the consideration of cost and unit cost results for wholesale power supply, if it is postulated that income for waste disposal is 12,000 yen/ton, power generation costs in excess power selling and wholesales are 6.4 yen/kWh and 9.1 yen/kWh, respectively. 67 figs., 48 tabs.

  7. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  8. Incinerators for coping with environmental issue. Gasification melting technology for municipal waste (direct melting system for municipal waste recycling); Kankyo mondai ni taiosuru shokyakuro. Ippan haikibutsu no gas ka yoyu gijutsu (chokusetsu shigenka system)

    Energy Technology Data Exchange (ETDEWEB)

    Shibaike, H. [Nippon Steel Corp., Tokyo (Japan)

    1998-04-01

    In the above named system, waste including incombustibles is subjected to high-temperature direct gasification and melting for the waste to be reduced in volume and rendered harmless and recyclable. The system comprises a gasification melting furnace, combustion chamber, gas treatment facility, and a melt recycling facility. Coke and coal, together with waste, are fed into the vertical shaft furnace through a port at the middle. The inside of the furnace is divided, from the top section downward, into a drying/pre-heating zone (300degC), a pyrolytic gasification zone (300-1000degC), and a combustion/melting zone (1700-1800degC). The pyrolytic gas is exhausted from the top section, led into the combustion chamber, and, after perfect combustion, forwarded into the waste heat boiler. The residual ash and inorganic matters descend together with coke to the combustion/melting zone. The coke is burnt to high temperature by oxygen-enriched air from the tuyere, and melts the ash and organic matters perfectly. The melt is then taken out of the furnace, cooled by water for conversion into granular slag and metal iron, to be magnetically separated for the collection of iron. This is attracting attention as a next-generation technology because it will facilitate the siting of ultimate disposal plants, solve environmental pollution problems, and enable the reuse of resources. 8 refs., 10 figs., 4 tabs.

  9. Joint Research. Report on the results of developing commercialization of a technology of process wastes and re-utilize them by using petroleum substituting energy; Kyodo kenkyu. Sekiyu daitai energy riyo haikibutsu shori saishigenka gijutsu jitsuyoka kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A study was conducted on a technology to melt shredder dust and non-combustible wastes directly by using coal, reduce their volume and re-utilize them. The elementary study on a high-temperature melting and treating technology set such targets as optimizing the melting and treating technology in correspondence with properties of materials to be treated, by using a small melting test plant, achieving a volume reduction rate of 1/200, and reducing treatment cost. In order to make innoxious the different kinds of environmental loading materials contained in exhaust gas from a high-temperature gasification and direct melting system, discussions were given on an optimum control condition for the exhaust gas system facilities. Furthermore, physical properties of discharges (slags nd metals) were investigated to discuss material re-utilization. In discussing optimal systems, three kinds of systems including two types utilizing fuels were proposed as high-temperature gasification and melting treatment process from a viewpoint of technology and cost. Respective systems were compared with each other on treatment cost, and their priorities were identified. 56 refs., 50 figs., 55 tabs.

  10. Fiscal 1993 investigational study of a model of international cooperation for an environmentally harmony type green technosystem; 1993 nendo Oshu ni okeru haikibutsu shori oyobi recycle no doko ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the natural environment preservation, effective utilization of resources, and maintenance of the ecosystem, an international cooperation model was proposed for the environmental harmony type green technosystem. A comprehensive evaluating analysis of a green forest resource, etc. as the global resource, and an intensive extraction of subjects and needs was made. The analysis was conducted of technical possibility and abstract business development effects toward the industrialization with high values added which is in harmony with the environment. As a case study, the Papua New Guinea area, Malaysia was selected and re-evaluated. For this typical tropical forest area, a new technical system was studied based on the natural environment, industry/economy, social/cultural assessment, etc., and a model for industrializing new international cooperation was proposed. For the model making for industrialization, various steps to be taken and conditions to be prepared were studied and arranged for the realization. Upon going ahead with the international technical cooperation, Japan, a large lumber consuming country, needs to always consider the fostering and effective use of lumber resource in particular. 27 refs., 28 figs., 30 tabs.

  11. Multi-objective analysis of mixed integer planning problem according to hybrid genetic algorithm. Application of waste disposal facility to location plan; Haiburiddo arugorizumu niyoru kongo seisukeikaku mondai no tamokuteki kaiseki. haikibutsu shobunshisetsu no ricchi keikaku heno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Yoshiaki

    1999-02-05

    This paper was concerned to rationally solve problems based on the various complicated global social environment as representative of location and arrangement problems in the wide area network, and shown to classify many of these problems into a multi-objective mixed integer planning problem. However, since the solution-obtained work was extremely large to obtain a sole exact optimum solution due to significantly increasing the solution-obtained work with a large scale of these problems, development of the solution method to emphasize a practical standpoint that an approximate solution was hopefully obtained with less effort have been paid attention. Therefore, concerning the genetic algorithm regarded as a hopeful method in recent years, problems on a usual solution-obtaining process that real variables were coded and restriction conditions were treated as a penalty function were firstly pointed out. Based on this work as a practical solution method, the combination of a problem range and the characteristics of solution methods were considered into a step construction, and a hybrid genetic algorithm using mathematical programming was proposed. As an introduction method to a parade optimum solution in a multi-objective mixed integer planning problem, this solution method was mentioned to be a practical solution method. As concrete examples, a harmful waste disposal location plan problem was given; the effectiveness was examined by numerical experiments. (translated by NEDO)

  12. Mixture of industrial waste oxidized titanium and reduced slag from electric furnace used as hydraulic material. Denkiro kangen slug to sanka titan kogyo haikibutsu no kongobutsu no suinan zairyo to shiteno riyo

    Energy Technology Data Exchange (ETDEWEB)

    Honda, A. (Osaka City University, Osaka (Japan). Faculty of Engineering); Kuwayama, T. (Daido Institute of Technology, Nagoya (Japan)); Yamada, M.; Ikezaki, H. (Osaka City University, Osaka (Japan). Faculty of Engineering)

    1990-10-29

    Slag released from an electric furnace consists mainly of waste steel. There are two types of slag, namely, oxidized slag and reduced slag. Reduced slag, which is generally in the form of powder, is difficult to recycle as compared with oxidized slag. However, with a hydraulicity, some reduced slag is expected to be useful as hydraulic material. Test results obtained here show that the hydraulic properties of reduced slag powder can be improved by mixing it with gypsum and that the resultant mixture can serve to improve the prooperties of soft clay. Another study is made to determine the potential, as hydraulic material, of mixtures of reduced slag powder and waste gypsum material with a high gypsum content released from an oxidized titanium production process. The hydraulicity is found to develop as a result of the formation of a hydrate of calcium aluminate which is contained in the slag. Addition of water to the hydrate and gypsum cause the formation of ettringite, leading to an increased uniaxial compressive strength. These findings indicate that the above-mentioned mixture can be useful to improve the hydraulic properties of coal ash to be disposed of at landfill sites. 5 refs., 5 figs., 1 tab.

  13. Report on investigation in fiscal 2000 related to improving APEC industrial technology indicators; 2000 nendo APEC sangyo gijutsu indicator seibi kanren chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to strengthen cooperation in the research and development field in the APEC areas, a database was structured on such data as research and development assistance institutions in each country, research and development budgets, human resources for research and development, such governmental regulations as research visa issuing procedure and foreign capital control, research and development trends in private business entities, major research and development organizations, and evaluation on research and development environment in private business entities. The introduction of the report describes the background of the investigation, and factors for internationalization of research and development. Trends were investigated on research and development in the eight nations; the Philippines, Thailand, Korea, China, Singapore, Taiwan and Malaysia. Specifically, investigations were made in China on the research and development statistics, research and development programs, investment trends, small to medium business entities, promotion of research and development, the result of the 1999 APEC investigation, computer software, computer net services, and electronic trading (e-commerce). In the Philippines, six items were investigated, such as the economy trends and prospects, the result of the 1999 APEC investigation, case studies, and small to medium business entities. (NEDO)

  14. Report on the results of `the R and D of industrial technology information base arrangement`; `Sangyo gijutsu joho kiban seibi kenkyu kaihatsu` seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to information processing in the open type research information networking, R and D were conducted to establish basic technologies such as grading-up, acceleration, enhancement of efficiency, diversification of application, promotion of usable data accumulation, etc. As to the R and D of software to promote sharing of research information, software was developed which can easily modify and renew management objects for users at research sites, etc., and the target was almost achieved. Concerning the R and D of information supply technology, an approach was presented whereby clients submit bids for each stream of the data requested and the admission decision is made so as to maximize gain of the session under network capacity constraints. Additionally, the R and D were made of software to construct an international information sharing system, a system for multi-lingual I/O, text manipulation and communication, and software for remote use of network based information for scientific computing. 138 refs., 125 figs., 33 tabs.

  15. Fiscal 2000 comprehensive survey. Project for development of international standards for supporting novel industries; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo. Sogo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research and development for creation of international standards had been under way for three years since fiscal 1998 for the sustenance and securement of Japan's technical advantage and for the enhancement of the international competitiveness of its industries. In the ultimate fiscal year for the project, studies were made for establishing standards relative to 13 subjects, involving the management of color reproduction, assurance of interoperability of optical disk systems, digital image processing for home-use digital electronic appliances, securement of connection between information devices for home-use electric appliances, production process system, method for testing and evaluating fine ceramics for communication equipment, method for evaluating high-temperature properties of new glass, method for testing and evaluating corrosion resistance of surface treated steel sheets, method for testing and evaluating pure titanium, method for testing and evaluating plastic optical fiber, method for evaluating properties of high-strength large-diameter steel pipe for ultrahigh-pressure natural gas pipeline, method for measuring fuel consumption of hybrid electric vehicles, method for calculating the recycling rate of automotive products, or the like. The fruits of 77% of the efforts have already been proposed as international standards or have arrived at a stage where they may be proposed as such. (NEDO)

  16. Studies on carbon dioxide emission control. With an emphasis placed on Korean industrial structure; Nisanka tanso haishutsu kisoku ni kansuru kenkyu. Kankoku no sangyo kozo wo chushin ni

    Energy Technology Data Exchange (ETDEWEB)

    Ishitani, H.; Matsuhashi, T. [The University of Tokyo, Tokyo (Japan); Moriguchi, Y.; Kondo, Y.; Shimizu, H. [National Inst. for Environmental Studies, Tsukuba (Japan)

    1996-02-01

    An examination was made on the structures of CO2 emission in the Korean manufacturing sector for the purpose of drafting measures for regulating and controlling CO2 emission. With the use of a list of interactive industries, the emission was determined on the assumption that CO2 was discharged by the consumption of fossil fuel. 1985 and 1990 were chosen as the years to be examined. The industries with a large quantity of emission were construction, transportation, storage, communication and metal products/machinery. The largest factor that influenced the increase in the emission was the growth of the ultimate domestic demand, and the next factor was export. On the other hand, a factor worked in the direction of reducing the emission was the change in the emission coefficient and technical changes. It would be important that measures for CO2 emission control be centered for a short term on regulating the industry that has a high induced coefficient (using products from other industries having a high CO2 emission coefficient as intermediate products), and for a long term on regulating the ultimate domestic demand and export. The changes in the emission coefficient and the changes in technology would also be important in reducing the emission as well as the reform of the industrial structure. 2 refs., 3 figs., 2 tabs.

  17. Report on investigation in fiscal 2000 of exchange of industries with foreign countries and human resource training; 2000 nendo kaigai kara no sangyo koryu jinzai ikusei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to strengthen the function to assess new business strategies for ventures and small business entities in the industry supporting organizations in Miyagi Prefecture, experts were invited from the United States to provide educations and lectures. Twenty-seven persons participated in a three-day seminar managed by three experts at the Port of Technology in Pennsylvania. The course was covered the following three fields: 1) the basic theoretical course, 2) workshops, and 3) the summary and utilization of the screening guide. In Item 1), the course were consisted of the following 12 items: the purpose of the seminar, necessity of entrepreneurs, mentors, business plans, summary of the plans, markets, market selection, the summary of technological and financial managements, sources of capital procurement, and capital procurement opportunities. In Item 2), a group of three to four persons assessed the business strategies of existing corporations based on the 'venture business examination criteria' given by the instructors. In Item 3), the course were consisted of the following six items: management teams, markets, the status of competition, technological assessment, marketing strategies, and financial conditions. (NEDO)

  18. Report on investigation in fiscal 2000 of industrial technology exchange with international networking organizations; 2000 nendo kokusaitekina network gata soshiki tono sangyo gijutsu koryu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to promote exchange of industrial technologies, investigations and analyses were made on identification of the current status of networking organizations in different countries working as windows for industrial technology exchange, and on the actual status of technology commercialization methods in overseas incubators. Activities were taken in the following three fields: 1) the current status of networking organizations and incubators in different countries, 2) typology of technology commercialization, technical fields, and success factors, and 3) possibility of the use of technology information in the networking organizations. In Item 1), investigations were performed on the current status and actual activity status of the networking organizations including research parks and individual incubators intended of information exchange, mainly in the United States, UK, and Finland. In Item 2), considerations are given on the points related to technology incubation based on the information about the networking organizations and incubators in each country, and the way the industry-academia cooperation should be. In Item 3), discussions were given on the roles of the networking organizations and the possibility of utilization of technological information in the networking organizations in Japan. (NEDO)

  19. 1998 Annual Study Report. New industry supporting type international standard development program (Comprehensive survey); 1998 nendo seika hokokusho. Shinki sangyo shiengata kokusai hyojun kaihatsu jigyo (sogo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Summarized herein are results of the survey on a total of 13 themes for international standardization. These themes are for standardization of (1) color control, (2) securing interoperability between optical disk systems, (3) digital image processing for home digital electronic appliances, (4) securing interconnectability between home electronic information appliances, (5) production process systems, (6) testing and evaluation methods for fine ceramic materials for communications, (7) evaluation methods for high-temperature properties of new glass melts, (8) corrosion testing and evaluation methods for surface-treated steel plates, (9) testing and evaluation methods for high-purity titanium, (10) testing and evaluation methods for plastic optical fibers, (11) evaluation methods for high-strength, large-size steel pipe characteristics for superhigh-pressure natural gas pipelines, (12) methods for measuring mileage of hybrid electric vehicles, and (13) methods for determining recycle ratios of automobile components. This comprehensive survey also includes overseas trends for the standardization, establishment/expansion of the international standardization processes, and standardization for determining recycle ratios of home electric appliances. (NEDO)

  20. Changes in energy price and the international competitiveness of Japanese industries. Energy kakaku no hendo to wagakuni sangyo no kokusai kyosoryoku

    Energy Technology Data Exchange (ETDEWEB)

    Kuroda, M.; Shimpo, K.; Kawai, H. (Keio Univ., Tokyo, (Japan))

    1990-03-05

    This report studies changes in international competitiveness of individual industry in Japan and the U.S. between 1960 and 1985 by using time series data in Japan and the U.S. on the basis of the measurement of productivity in both countries and the measuring rule for the absolute comparison of their level. The conclusion is summarized as follows: 1. Technological advance rate in both countries dropped rapidly after the oil crisis, but showed an average tendency to recover in 1980s; that is, it does not necessarily indicate a time series tendency to decline. 2. A technological gap between Japan and the U.S. expanded in 1970s, reached the peak in 1980, and reduced again during 1980s, however, dispersion among industries has tended to expand. 3. The future trend of a technological gap between Japan and the U.S. shows bipolarity. In Japan, technologies with big trade scale in the field of chemicals, electric machines, and precision machines attain superiority. 4. The price competitiveness reflects a gap of technological efficiency and factor prices respectively. Nevertheless, there are some Japanese industries having an advantage over the U.S. since they offset a gap of factor prices against a technological gap. 9 figs., 4 tabs.

  1. Trend of the strategy of European and American chemical industry in the restructuring; Obei kagaku sangyo no saihen ni miru senryaku no doko

    Energy Technology Data Exchange (ETDEWEB)

    Niimi, M.; Yamabe, T.

    1999-12-01

    The business of life science is the cover products which connect directly with life such as medical supplies, functional food, nutriments, agricultural chemicals or seeds. The wave of the reorganization of enterprises in the life science field also spread to the integration of the medicine specialty enterprises, and new association trees mainly on medical supplies such as Novartis in Switzerland, Zeneca, Astra Zeneca and Glaxo Wellcome in England were born. Many major chemistry manufacturers are also agricultural chemical manufacturers. Though agricultural chemicals were being shifted to one which being effective at the low use owing to the environmental problems, with the advance of the popularization of gene recombination crops, sales decreased on the agricultural chemical business more, and participation and restructuring to the seed business were accelerated. In this paper, the outline of business restructuring and strengthening the basic strategy in the main chemistry enterprises in Europe and the U.S.A. are described. As a trend of the restructuring, some examples on Du Pont, Dow chemical, Monsanto, ICI, Akzo Nobel, Novartis, Shell Chemicals, BASF, Hoechst and Bayer are introduced. (NEDO)

  2. Integration of the market of the European community and the change of the industrial structure. EC shijo togo to sangyo kozo no henka

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, T.; Uno, K.; Nakamura, T.; Yamashita, S. (Osaka Sangyo University, Osaka (Japan). Institute for Industrial Research)

    1992-11-20

    This paper considers problems in the change of the industrial structure as a result of the EC market integration, and the change of the physical distribution structure, mainly in cargo transportation. The market integration is being moved forward mainly on liberalization of flows in people, materials, and currencies, but the material flow liberalization has not progressed noticeably because of difficulty in deregulations. Changes in the transportation structure on the whole in the EC countries would not see a complete removal of barriers supported by the transportation licensing system because of issues in protecting domestic transportation markets and sharing the road expenses, even if the tariff barrier has been removed as a result of the market integration. Amid the predictions on deregulated legislations and intensified competition associated with the integration, the French trucking industry is indicated of its direction toward a two-layer structure comprising large-scale enterprises and medium-to-small companies. The German unification created problems in transferring from the socialistic command economy to the capitalistic market economy. The paper gives considerations on the real state of affairs in the privatization policy of the people-owned enterprises in the former East Germany, and its economic and managerial problems that should be solved amid the large-area EC market integration based on the mutualism over and above the economic system transition.

  3. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  4. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  5. Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

  6. Fiscal 1998 research report on the R and D on industrial science and technology for creating new industries. R and D on intelligent material and structure systems; 1998 nendo shinki sangyo soshutsugata sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Chiteki zairyo kozo system no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project aims at development of the basic technology of the structure system which has the same intelligent functions as living body such as perception, decision and response through information processing/control (brain) by integrating advanced complex material structure (skeleton), fiber or film sensor material/device (nerve) and actuator material/device (muscle). This report describes the fiscal 1998 research result. On health monitoring technology, study was made on development of high-performance sensors, and a damage detection and self-diagnosis system for structural integrity. On active adaptive structure technology, study was made on improvement of a quasi-elastic behavior model for shape memory alloys, and a candidate actuator for noise and vibration reduction. On actuator materials and devices, study was made on the relation between electronic properties and dielectric/electro-strictive characteristics of the latest advanced ceramic materials available. Creation of silent smart structure was also clarified. Smooth connection and cooperation among groups were promoted through the technical committee and research on domestic and overseas trends. (NEDO)

  7. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

  8. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  9. Fiscal 1997 R and D project on industrial science technology under consignment from NEDO. Report on the R and D of nonlinear optoelectronic materials; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Hisenkei hikari denshi zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to the development of organic base materials, the paper is going ahead with an evaluation, higher performance and further use as materials of basic optical properties of quirale nonlinear materials and organic conjugate base materials which are promising among organic low molecular materials. As the development of orientation control crystal growth technology, grooves for orientation control were formed on the surface of the lead glass substrate, from which thin film single crystals were obtained. The nonlinear response was studied of the glass where semiconducting fine particles dispersed in matrix glass. Glass scattering base prototype materials were selected by the sol-gel method and ultra-low melting-point glass method. The glass dispersion base materials by the very fast cooling method was also studied. For the purpose of realizing a high speed switching characteristic, a processing technology was developed of ultra fine particle dispersing polymer light waveguide. As to the technology for super lattice, the optimum nonlinear performance materials were selected mainly with the optimum complex super lattice base. Moreover, the three-dimensional super structuring technology was constructed to improve nonlinear optical characteristics. The comprehensive investigational study was conducted for effective promotion of the research development. 177 refs., 260 figs., 27 tabs.

  10. FY 2000 report on the results of the research and development project for new industry creation type industrial science technologies. Cluster ion beam process technology; 2000 nendo shinki sangyo soshutsugata sangyo kagaku gijutsu kenkyu kaihatsu seido seika hokokusho. Cluster ion beam process technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of development of cluster ion beams. This technology generates the strong ion beams of atom and molecule clusters, and irradiate them onto the solid surfaces, to create new materials or treat materials. It allows the nano-level treatment. The program for high-current cluster ion beam generation/irradiation technology for industrial purposes attains the target high-current beam of 500{mu}m. It is necessary to establish the optimum cluster size, irradiated energy and ion species for the highly functional surface treatment, for which applicable technologies, e.g., those related to time of flight and molecular dynamics, are developed. Studies on high-current, large-area irradiation technologies are started. The program for material processing technologies involves evaluation of crystalline defects formed during the beam implantation by photoluminescence spectroscopy, and studies on semiconductor surface processing technologies. The surface smoothening technology is investigated to reduce crystalline defects and stress-induced strains for difficult-to-process materials, e.g., SiC and diamond, and the good results are produced. The program for development of superflat/superhard thin film formation technology involves irradiation of the Ar ion beams during the deposition of C{sub 60}(fullerene), to produce the superhard thin film. (NEDO)

  11. FY 1997 report on the survey of history and heritages of industrial technology. Survey of the originality and creativity of electrical and electronic engineering in Japan; 1997 nendo chosa hokokusho (sangyo gijutsu rekishi keisho chosa). Kokunai sangyo no denki denshi gijutsu no dokusosei sozosei no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For selection of future technological themes and developmental techniques, survey was made on the history of development of electrical and electronic engineering and industry in Japan. The Technical Committee for History of Electrical Engineering of the Institute of Electrical Engineers of Japan has diffused various activities on the history research into a society since establishment in April, 1990. Hearing survey which is extremely important for technology succession has been carried out continuously since 1991 for 3 honorary members of this institute who are pioneers of electrical and electronic engineering innovation in Japan. Importance of creative innovative technology development is increasing more and more, and `finding a guide into tomorrow by taking lessons from the past` is one of techniques for technology development. Publication and opening on Internet of the hearing survey results are under consideration as public service. Preparation of the database of the hearing results is also necessary for promotion of these activities. 17 refs.

  12. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  13. FY 1996 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (Keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Organosilicon polymers are highly innovative materials having high performance and novel functions, and they can be widely applied. The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis of highly conjugated polymers is investigated. In (2), novel organosilicon polymeric materials have been developed, which would be applicable to direct lithography of electronic circuits, and which could contribute to simplification of the circuit formation process. In (3), the research aims at development of new silicon-based polymer materials with luminescent function which can be applied to the large size electro-luminescent display devices. In (4), new materials with visible light absorption have been synthesized through the molecular design and synthesis. The photo-carrier generation was observed. 107 refs., 86 figs., 23 tabs.

  14. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of originality and creativity of electric and electronic technologies in Japan; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo no denki denshi gijutsu no dokusosei to sozosei no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to clarify the innovation process of industrial technologies in Japan and the originality and creativity seen in that process to serve for the future development, hearing surveys have been performed. The persons being the hearing objects are Mr. Koichi Oshima who has researched the series capacitors for power transmission cables, Mr. Makoto Osatake who has researched the distortion in frequency modulation, and Mr. Hisao Oka who has researched the destruction phenomena in rectifier elements of power semiconductors. Mr. Hiroshi Inose and Mr. Toichiro Koike who have accepted the hearing survey were represented by the mourning statements due to their sudden death. The items of the questions in the hearing survey included: their home background, why have they studied electricity area specially?, determination criteria when they were forced to make a serious selection and the results thereof, examples of successes and failures and the age background, breakthrough points in the success cases, what they want to convey to future generations from their achievements, what they wished if they have done, methods of conveying the technologies, persons whom they respect as their teachers, existence of persons who have given them protection, sources of passion and motivation that supported the research life, and the principles toward the research. (NEDO)

  15. Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

  16. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis method of regular polymers with a 3-D structure was developed. Non-volatile dopants were developed, and structures of polymer-dopant composites could be controlled. In (2), precise control of conductivity was examined. Material processing and evaluation techniques were also examined through stabilization of polysilane thin films, optimization of pattern forming conditions, and precision of patterns. In (3), new silicon-based polymers have been synthesized. In (4), two kinds of polymers have been synthesized for development of materials with high photo-carrier generation efficiency and high mobility. 72 refs., 71 figs., 22 tabs.

  17. Ultimate evaluation report on research and development of basic technologies for next-generation industry. Conductive polymeric materials; Jisedai sangyo kiban gijutsu kenkyu kaihatsu saishu kenkyu kaihatsu hyoka. Dodensei kobunshi zairyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    Basic technologies are established that equip polymeric materials (insulators in general) with conductivity similar to that of metals for the realization of novel conducting materials characterized by light weight, high resistance to corrosion, and ease of machining, and for the manufacture of novel electrical/electronic materials having new functions different from those of conventionally used metals. The aims are to realize a conductivity of 10{sup 5}S/cm or more, to manufacture materials sufficiently stable when left in the ordinary or inert atmosphere, and to manufacture materials which may be machined into proper shapes as required in the industry. The results of the 10-year-long development endeavor greatly contribute to the creation of high-level materials, the systematization of technologies, and the elucidation of the conducting mechanism. In relation to polymeric materials, in particular, a new technology is developed that equips, with high reproducibility, polymeric materials with conductivity similar to that of silver or copper; a graphitic material is created for the first time provided with conductivity superior to that of metals; and conducting polymeric materials are equipped with an easy-to-machine feature. A great contribution is accomplished to the production of superconductivity in organic charge-transfer complex crystals and to the elucidation of the conducting mechanism. (NEDO)

  18. Report on surveys in fiscal 1999. Foundational survey for establishing strategies for industrial technology (surveys on strategies for establishing priorities and improving intellectual foundation); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa. Jutenka senryaku chiteki kiban seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to promote technological developments smoothly, surveys and discussions were given on how the improvements in intellectual foundations are worked out inside and outside the country. In surveying the status of improving the databases inside and outside the country, it was disclosed that the databases both inside and outside the country are arranged under the auspices of the governments. The reason for this is considered because the intellectual foundation improvement is difficult to be established as a business. In order to structure a framework to put together and publicize the data including those possessed by the private sector, surveys and discussions were given on the interest among titles to intellectual properties, contractual relationship between the database improving parties and the data providing parties, relationship with taxation systems, and how the incentives should be provided for publicizing the data. In discussing a model case to utilize data acquired by the private sector, it was concluded that assistance by the governments is indispensable for the organizations for structuring and maintaining the databases to continue their activities independently. Among the data measured and managed at the national level, problems in the publicizing method thereof were discussed especially on the data related to ocean information. (NEDO)

  19. Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

  20. Report on achievements in fiscal 1998. Demonstrative research of an alkali recovery process in the non-wood pulp paper manufacturing industry; 1998 nendo himokuzai pulp seishi sangyo arukari kaishu process ni kakawaru jissho kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    This project is intended of performing demonstrative research jointly with China on a system to efficiently extract, condense, and combust black liquor in a non-wood pulp paper manufacturing plant in China to recover alkaline solution and heat energy, and to contribute to proliferation of the system. Specifically, an alkali recovery plant is built in Cangshan Paper Making Plant in Shandong Province to verify conservation in energy and reduction environmental load. This fiscal year has performed (1) component researches and related technology investigations, and (2) device design and fabrication. For Item 1, the extractor adopted the spiral net type, and the condensation device adopted the falling film evaporator of full-can plate type. For the silica removing agent, data were acquired on reduction of silica in the black liquor and effect of reducing the black liquor viscosity. Basic design requirements were established for an alkali recovery process for a pulp production plant of 75 t/d. Regarding Item 2, prepared were the material and heat balance tables for the black liquor extractor and the black liquor condenser, process flow diagrams (PFD), device specifications, a meter list, and a summary utility consumption list, and confirmed them with the Chinese side. For the black liquor combustion device and the caustification device, PFD and device list prepared by the Chinese side were acquired to start the basic design. (NEDO)

  1. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  2. Current status of and future prospect on introduction of cogeneration. Ota Ward Industrial Plaza combining composite energy sources; Kojene no donyu jokyo to kongo no tenkai. Fukugo energy gen wo kumiawaseta Otaku sangyo plaza

    Energy Technology Data Exchange (ETDEWEB)

    Oka, T.; Saito, A. [Tokyo Gas Co. Ltd., Tokyo (Japan)

    1998-02-01

    This paper introduces a cogeneration facility installed in a composite facility for the Small and Medium Enterprise Promotion Center in the Jonan area of Tokyo, the Ota Ward Industrial Plaza, and municipally owned houses. With this cogeneration system, electric power generated by a gas engine generator is linked with a commercial power supply system and supplied into buildings. Waste heat recovered into warm water is utilized for room cooling by means of a warm water absorbing freezer, and for room warming and hot water supply via a heat exchanger. The system can select freely an optimal combination of composite energy sources, taking waste heat as one of the heat sources. According to a result of the simulation on cogeneration and waste heat, the annual load rate is 1950 Gcal, of which the waste heat utilization amount is 883 Gcal corresponding to 45.3%. The ratio of annual waste heat utilization to heat utilization in the facility was 41.6% for room cooling utilization, 51.6% for room warming utilization, and 6.8% for hot water supply utilization. The cogeneration generated power accounted for 22.9% of the power demand in the facility. 4 figs., 4 tabs.

  3. Progress of electrical and electronic engineering in the last 10 years. 6. Progress in the field of industry applications; Denki denshi gijutsu 10nen no ayumi-6. Sangyo oyo bun`ya ni okeru ayumi

    Energy Technology Data Exchange (ETDEWEB)

    Nakazato, T.

    1998-06-01

    Power electronics technology conducting conversion and control of electric power by means of electronic means by using the power semiconductor device, developed extremely by development of the power transistor and GTO (Gate Turn-off Thyristor). In the demand, the spread of inverter is miracle, centering the motor control, uninterruptible power supply (USP) and so on, it is used in many fields such as manufacturing industry, chemical industry, OA (Office Automation) system, and so forth. The history of realization in the rotary machines reaches about 110 years. The development of recent technique containing driving technique is miracle. There is a variable speed pumped-storage power system developed and realized by Japan faster than in the world. In the field of the railway, speed-up in the Shinkansen line and the ordinary railway line, power saving, cost reduction, improved convenience, and so forth were intended. In the field of the road traffic, car navigation brought an extreme spread as well as cost reduction. For a typical example of control technique in industry, there is a technique of motion control. This is a field possible for Japan to show a priority from its original, such as robot control. 6 figs., 1 tab.

  4. Present status of and subjects on the industrial utilization of polymer separation membranes. Historical review on the development of separation membrane; Kobunshi bunrimaku no sangyo riyo no genjo to kadai. Bunrimaku no hatten

    Energy Technology Data Exchange (ETDEWEB)

    Oya, H. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

    1998-07-05

    Four episodes involving the development of separation membrane technology are described from the historical point of view. The 1st episode relates to precision filtration and ultrafiltration evolved from the traditional filtration technology; the 2nd to membranes synthesized for the study of osmosis and dialysis beginning in the 18th or 19th century; the 3rd to electrodialysis; and the 4th to the asymmetrical membrane invented by Loeb and Sourirajan. In the 1st episode, the membrane filter, precision filter, and ultrafilter find their use in various fields and come to enjoy the largest share in the application of membranes since they remove particulates, bacterial or colloidal, almost completely from a solution with the consumption of a relatively small amount of energy; in the 2nd episode, parchment paper is applied to dialysis for the recovery of sodium hydroxide from compressed pulp liquid, and to hemodialysis; in the 3rd episode, Japan Monopoly Corporation manufactures common salt by means of electrodialysis using ion exchange resin membrane; in the 4th episode, the asymmetrical cellulose acetate membrane is invented, with the invention opening the way to the age of membranes thanks to the invented membrane`s flow rate ten times higher than that of the conventional type. 28 refs., 3 figs.

  5. Joint research achievement report on field test project for photovoltaic power generation of industrial use in fiscal 2000 (3/5); 2000 nendo sangyo tou you taiyokohatsuden field test jigyo kyodo kenkyu seika hokokusho 3/5

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    This paper summarizes the achievements in fiscal 2000 on the field tests for photovoltaic power generation of industrial use. This report describes the details of the achievements on the following organizations: Kuwana City in Mie Prefecture; Osaka City in Osaka Prefecture; Takamatsu City in Kagawa Prefecture; Choyo Village in Kumamoto Prefecture; Ichikawa City in Chiba Prefecture: the Alef Corporation (Nishi-Taga Shop); Miyakonojo City in Miyazaki Prefecture; Kameyama City in Mie Prefecture; Ogasawara Village in Tokyo Metropolitan Area; the Nagoya City Traffic Bureau in Aichi Prefecture; Yahaba Township in Iwate Prefecture; Minoo City in Osaka Prefecture; Seki City in Gifu Prefecture; Sapporo City in Hokkaido, Hikari City in Yamaguchi Prefecture; the Saishunkan Pharmaceutical Company; Yasuki City in Aichi Prefecture; Hiroshima City in Hiroshima Prefecture; Hekinan City in Aichi Prefecture; Akishima City in Tokyo Metropolitan Area; Totsu Village in Aomori Prefecture; Toura Township in Aichi Prefecture; the Alef Corporation (Izumimatsu-Mori Shop in Sendai City); the Fujinomi Society, a sodial welfare juristic person; Takeya Corporation; the Kurume University of Industry; a school juristic person; the Maesawa Bag Making Industry; the Hankyu Railways; the High Sheet Industry; and the Yamagata Government. (NEDO)

  6. 30th Anniversary Lecture Meeting Special Plan Panel Discussion, 'Toward Activation of Aircraft Industry'; 30 shunen kinen koenkai tokubetsu kikaku panel discussion 'kokuki sangyo no kasseika'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-05

    The paper summed up a panel discussion, 'Toward activation of aircraft industry' held as a special plan of the General Meeting of the Japan Society for Aeronautical and Space Sciences/the 30th Anniversary Lecture Meeting held on April 6, 1999. Mr. Hoshino from the aircraft/arms/space industries department of MITI described the trend of the aircraft industry and industrial policies. Mr. Sakata from National Aerospace Laboratory explained the present state and the aim of supersonic experimental airline. Mr. Nakamura from the Society of Japanese Aerospace Companies commented on the present situation of the aircraft industry in Japan and the course to be adopted in the future. Mr. Ito from Ishikawajima-Harima Heavy Industries Co. stated the expectations for the present and future aircraft industry from a standpoint of engine maker. Mr. Endo from Japan Airlines Co. described what they expect of from a standpoint of airline user. Mr. Nakahashi from Tohoku University explained his study field, computational fluid dynamics (CFD). (NEDO)

  7. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Study on possibility of research exchanges; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo seika hokokusho. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the study on possibility of research exchanges, conducted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. For development of thin-film catalysts, HTE, a venture developing combinatorial chemistry application to catalysts, is a potential partner for the exchanges. One of the technical problems involved in underground sequestration of CO2 relates to evaluation of the reactions between CO2 injected under pressure and the surrounding rocks. It is a less site-specific theme, and preferably pursued through international networks. The RITE delegates have visited the British Geological Survey, Canada's Alberta Research Council, and US's Pennsylvania State University, Rice University and Chevron Petroleum, finding research exchange possibilities in all of these organizations for broad technical themes related to underground sequestration of CO2. For energy conversion technologies using biomass resources as the source materials, the potential partners for the research exchanges include Swedish Royal Institute of Technology, Belgium's Catholic University of Louvain and Spain's University of Zaragona which leads researches in production of gases from wastes and biomass. (NEDO)

  8. Achievement report for fiscal 1998 on joint research business (2/2). Photovoltaic power generation field test for industrial purposes; 1998 nendo sangyo nadoyo taiyoko hatsuden field test jigyo (2/2). Kyodo kenkyu gyomu seika hokokushyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Solar cell systems are installed on the roofs of facilities at various locations, and verification tests are conducted for usability and safety they will exhibit after prolonged operation under real loads, and this project aims at the popularization of photovoltaic systems. At Children's Ferrite and Science Museum of Nikaho Town, Akita Prefecture, a 20kW solar cell system is installed on the rooftop, and a 20kW inverter in the machine house. The power obtained is connected in a high-voltage interconnection to electric facilities in the museum, and supplied to in-house power facilities, illuminating systems, and air-conditioning equipment. Operation-related data are recorded in a data recording unit. Similar facilities are installed at corporations and institutions such as WAIDA Works, Kuriyama Shop, Nikko Building, Kiya Works, Aichi Prefectural Tobishima Junior High School, Gunma Prefectural Niisato Hall of Commerce and Industry, Ube Techno-Enji Corporation, Tezukayama Gakuin University, Kinki Kensetsu K.K., Takaoka Electric Manufacturing Company, Aichi Prefectural Incorporated Educational Institution Miura Gakuen, Asaguchi Taxi Company, Family Mart, etc., and field tests are under way for them. (NEDO)

  9. Survey report in fiscal 2000 on the survey on how universities are contributing to promotion of IT industries in U.S.A.; 2000 nendo Beikoku ni okeru joho sangyo gijutsu shinko ni taisuru daigaku no koken jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to discuss the ways the Japanese universities should be in venture incubation and for IT industries, and taking measures thereon, surveys have been performed on the current status of the roles played by universities for the information industries in the U.S. as well as trends and measures taken therein. The problem that the U.S. universities are facing is that the superiority of learning in business schools has become more indistinct than in experiencing and learning the business in venture companies. As a result, the number of people who want to enter business schools is decreasing. Therefore, universities are executing audacious innovations including reorganization of the curriculums. Representative examples are the UCLA's entrepreneurship program combining the electric engineering department and the business school, and the Stamford University's marketing skill development course for engineers. An organizational activity is also being taken to mediate dialogues between business entities and actual investors with a university working as the center, such as the one in MIT Enterprise Forum. (NEDO)

  10. Achievement report for fiscal 1998 on joint research business (1/2). Photovoltaic power generation field test for industrial purposes; 1998 nendo sangyo nadoyo taiyoko hatsuden field test jigyo (1/2). Kyodo kenkyu gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    For the promotion of the effective utilization of sunshine energy, photovoltaic power generation systems are installed on the roofs of facilities at various locations, and are subjected to long-term operational tests under real loads, and data are collected. Installed on the roof of Saisho-En, an incorporated welfare institution, is a 100kW standardization promotion type photovoltaic power generation system in which ten 10kW standard units are combined. The power generated is consumed for in-house illumination and air-conditioning, and the surplus if any is sold. Similar systems are undergoing field tests, installed at various sites such as Maruto Corporation, SAGA SANYO Industries Co., Ltd., Koyama Neurosurgery and Internal Medicine Hospital, Tsuchiura Urara Building, Osaka Alloy Works, Suntory Takasago Brewery, Katoolec West Company, Kyoto Precision Industries, Old People's Home Izumi for those requiring special care, Incorporated Medical Institution Keisei-Kai, Incorporated Social and Medical Institution Izumi-no-Kai, Akishimadai Kindergarten, Kiyosato Seminar House of Meiji University, and Kitakaminaka-gun Industrial Water Filtration Plant of Iwate Prefectural Business Bureau, etc. (NEDO)

  11. Report on achievement for fiscal 1998. Global environment industry technology development promotion project (the advanced technology survey and research project); 1998 nendo seika hokoiusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (sentan gijutsu chosa kenkyu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to structure innovative technologies to solve effectively the global environment problems, it is important to incorporate infra-structural technologies that have been achieved by universities and other research institutions. The fiscal 1998 project has commissioned 25 researches found superior from among research plans that have been invited during fiscal 1997. This paper enumerates the main themes including those under continued research. The research themes include: fixation of phosphor by using photo-energy, utilization of nitrogen fixing bacteria in rice plant roots for the purpose of carbon dioxide reduction, new functional solid ultra-strong acids for clean chemical processes, fixation of warming gases by using ultra critical fluid catalytic reactions, photo-catalysts having microporous structure, whose energy structure is controlled, waste water purification by using stimulation sensitive polymers, a practical and small high-speed environment purification system by means of a simple technology to cultivate high concentration bacteria of microorganisms, fundamental analysis of response to specific wavelength light in photosynthesized microorganisms, bio-remediation utilizing symbiotic systems of plants and bacteria, high efficiency catalysts purposed for total decomposition of water, and separation of carbon dioxide in deep sea bottoms by controlling hydrate crystal growth. (NEDO)

  12. Report on the invitation program for developing countries concerning technology promotion project of global environmental industry in FY 1997; 1997 nendo chikyu kankyo sangyo gijutsu suishin jigyo ni kakawaru chikyu kankyo kanren gijutsu kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In an effort to help preserve the global environment, International Center for Environmental Technology Transfer (ICETT) contributes to the solution of global environmental problems by promoting research exchanges with developing countries. As a part of this effort, ICETT hosted an environmental development researcher who visited Japan from the Institute of Environmental Research of Chulalongkorn University in Bangkok, Thailand. The invitation was extended at the request of NEDO. During the period of this investigation between September 16 and December 14, 1997, a photocatalyst was prepared and its performance was evaluated under the theme ``Application of photocatalysis to purification of atmospheric environment.`` At the same time, roadside test spots were inspected to study the practical application of optical photocatalysis. The visiting researcher also visited the National Institute for Resources and Environment to discuss with the staff of institute. This helped to deepen understandings of the state of air pollution problems confronting Japan, Europe, and North America, as well as issues related to the technologies that have been developed to solve these problems. The visiting researcher toured the RITE and examined Japan`s progress in the development of environmental control technology through joint research involving government, industry, and academia. At ICETT, the visiting researcher received training in Japan`s approaches to environmental problems in developing countries

  13. Research report for fiscal 1998. Research into the feasibility of exchange of studies for the development and promotion of global environment-related industrial technologies; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The above was conducted by Research Institute of Innovative Technology for the Earth (RITE). Worldwide collaboration is mandatory for the settlement of environmental problems for the earth, and RITE is positively promoting its interaction with research institutes abroad. In fiscal 1998, it sent research teams to government organizations and research institutes in Europe and America for studies there. A study in Europe involved the preparation of chemicals from CO2 by virtue of novel biotic reactions, and RITE's microbial molecular function laboratory plans to start a leading study in fiscal 1999. In relation with environmental impact reducing technologies using sunlight-aided photocatalysts, visits were paid to three research institutes in America. RITE itself has developed a powdered semiconductor catalyst and is engaged in the study of producing hydrogen by decomposition of water using solar energy. Concerning the production of saccharides out of farm wastes remaining unused, researches were made into the feasibility of joint studies with some advanced research institutes in America. Discussions were made about the performance- and stability-related improvement of enzymes usable for the decomposition of biomass, the analysis of biological environmental circumstances that substance yielding microbes find themselves in under anaerobic conditions, etc. (NEDO)

  14. Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

  15. Achievement report on research and development of the industrial basic technologies of the next generation in fiscal 1981. Research and development of composite materials; 1981 nendo jisedai sangyo kiban gijutsu itaku kenkyu kaihatsu seika hokokusho. Fukugo zairyo no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    Described herein are the results of the FY 1981 research and development for composite materials, established by the R and D system for the basic technologies of the next generation. The R and D project for resin-based composite materials involves basic researches on the matrix resins, and surface modification of the reinforcing fibers. The investigations and basic tests are conducted for monolithic molding, other types of molding, and cutting and boring by, e.g., laser beams and water jet. The other related efforts include researches on analysis theories for optimization of strength and rigidity of the composite structures, and development of the optimization programs. For the R and D project for the metal-based composite materials, the efforts are directed to understanding wettability and reactivity of the reinforcing fibers with metals, and development of the techniques for producing various types of preforms and compositing methods. The basic researches are conducted for hot pressing/rolling molding, extrusion/withdrawal, powder molding and melt molding of the composite materials with aluminum alloys as the matrices. The other R and D items include investigations on methods for evaluating qualities for the steps form the stock preparation to production of the final products. (NEDO)

  16. Research and development of basic technologies for next-generation industry. Ultimate evaluation report on research and development of highly efficient polymeric separation membrane material; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo saishu kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    For the enhancement of separation process efficiency and energy efficiency in the chemical industry, etc., basic technologies are developed involving high-performance separation membrane materials which are excellent in durability and usable in the field where separation by membranes has been impractical. The liquid mixtures subjected to separation are a neutral organic compound/water system, an acidic organic compound/water system, and a polar organic compound/water system; the gas mixtures subjected to separation are an oxygen/nitrogen system and a carbon monoxide/nitrogen system. After a 10-year/3-phase development endeavors, the initially intended goals are sufficiently achieved. Among those that have to be mentioned is the development of a nonaqueous separation membrane, a supported liquid membrane with amino acid optically active high performance separation capability, a high-precision evaluation unit for gas separation membrane characteristics, a selective permeation membrane with high-level oxygen and carbon monoxide carriers and reactivation technology, a high-performance ethanol separation membrane, a water/polar organic compound separation membrane, and a water/acetic acid separation membrane and stability providing technology. In particular, the water selective permeation membrane for a mixture of water and alcohol has already arrived at the stage of bench plant demonstration. (NEDO)

  17. Industrial and scientific technology research and development project in fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Research and development of superconducting materials and transistors (report on overall investigation of superconductive devices); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (chodendo soshika gijutsu kaihatsu seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes development of superconducting new function transistors. Fiscal 1997 as the final year of the project advanced improvement in such transistor-using processes as formation and micro-processing of superconducting thin films to show enhancement in characteristics of high-temperature superconducting transistors and possibility of their application utilizing their high speed motions. Furthermore, fundamental technologies were studied with an aim on junction transistors to be applied as circuits. For field effect transistors, evaluation was performed on critical current distribution of step-type particle boundary junction to make it possible to evaluate characteristics of hundreds of transistors. At the same time, a magnetic flux quantum parametron gate with three-layer structure was fabricated to identify its operation. In superconducting-base transistors, strong reflection was recognized on temperature dependence of permittivity of an Nb-doped strontium titanate substrate used for collectors, by which barrier height was reduced. In the junction transistor and circuit technology, isotropic ramp-edge junctions were fabricated, and so was a frequency divider circuit with single magnetic flux quantum mode operation for evaluating high-speed response characteristics. High time resolution current was observed successfully by using a high-temperature superconducting sampler system. 148 refs., 127 figs., 4 tabs.

  18. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of new software structuring models (R and D of micromachine cooperative control use software); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Shin software kozoka model no kenkyu kaihatsu (bisho kikai kyocho seigyoyo software no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted of software structuring models which ease the development and maintenance of software systems and meet diversification of needs. As for the study of the cooperative control use programming language, a R and D of agent oriented language Flage was carried out for expansion of language function, arrangement of network function, development of exercises, etc. As to the formulation of agent knowledge, proposed were processes to make a program from the specifications, and EVA, a mechanism in response to changes in the specifications of existing programs. In relation to the basic theory of cooperation system, a study was made mainly of object oriented attribute grammar OOAG as a model representing cooperative computation in software process as a rule group. Concerning the study of the situation recognition mechanism, researched were models of communication and reasoning among agents in cooperation. 187 refs., 107 figs., 23 tabs.

  19. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

  20. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the superconducting material and device (technical development of the Josephson device hybrid system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (Josephson soshi hybrid system no gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to establish basic technology for hybrid systems of superconducting and semiconducting devices, study was made on ultrahigh speed and low energy consumption properties of Josephson devices. As Josephson IC technology, a logical circuit, ring network, memory circuit, and oxide superconductor logical circuit were studied. As superconducting hybrid system technology, a Josephson device- semiconductor device interface, formation technology of signal transmission lines, and Josephson-MOS IC technology were developed. In fiscal 1997, as Josephson IC technology, switch motion of 4GHz in clock frequency was achieved by new high-density wiring process. Integration of some semiconducting processor elements, junction of surface- stabilized superconducting thin films, and motion of combination structure of some SQUIDs were also confirmed. On the hybrid system, voltage conversion operation of all interfaces was confirmed. Proper logical operation of the Josephson device hybrid circuit was also confirmed. 95 refs., 90 figs., 5 tabs.

  1. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of materials to heighten efficiency of power generation facilities); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo koseinoka zairyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 results of the study of the condensation base precise structure control conducted as a technical development of materials to heighten efficiency of power generation facilities. Condensation base polymer is an important material which occupies most of the engineering plastics. The study is aimed at developing basic technologies on the molecular weight and regularity by which a remarkable improvement can be expected in performance of condensation polymerization/ring-opening polymerization polymer materials, polymerization catalyst which arbitarily controls the primary structure such as branch and end group structures, and development of the precision polymerization process. In the synthesis of ordered polymer by direct polycondensation, synthesis of ordered polyamide from asymmetric monomers is studied. In the synthesis of chemically selective polyamide by direct polymerization, polyamide with functional group is synthesized by polymerizing without protecting functional group the monomer with such functional group as causes side reaction in polymerization. In the synthesis of polyamide having the limited distribution of molecular weight, the molecular weight/distribution of polyamide are controlled by connectedly conducting polycondensation which is itself to be done successively. 91 refs., 72 figs., 43 tabs.

  2. Fiscal 1997 R an D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (high-efficiency and analysis and manipulation technology for DNA); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Through the observation of super spiral DNA fixed on a spermin or spermidine treated mica substrate by AFM (atomic force microscope), fixation of DNA without any deformation in solution was clarified, and visualization of the spiral structure of DNA were successfully achieved. Manipulation of Xe atoms adsorbed on an Si(111) surface was certainly possible by using STM (scanning tunneling microscope)/atom probe equipment. A nucleation mechanism in crystal growth was studied for various organic source-molecules/GaAs(001) surface systems, and formation of high-density nuclei on the GaAs surface was achieved by accelerating the translational energy of Ga material molecules up to 6eV or more. Ziegler- Natta catalysis important for industrial polymerization of olefin molecules was precisely analyzed by first-principle dynamic simulation. A large-scale simulation of zeolite catalyst is also in promotion for methanol to gasoline conversion. 51 refs., 87 figs., 7 tabs.

  3. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (development of precise structure control materials for enhancement of oil refining); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (sekiyu seisei kodoka seimitsu kozo seigyo zairyo kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the R and D of technologies for creating original high-functional materials under the R and D system of industrial scientific technology. Japan chemical Innovation Institute (JCII) is conducting intensive joint researches under consignment from NEDO with private companies, universities and national research institutes. Among those, the paper reported the fiscal 1997 results of the following two researches conducted as development of precise structure control materials for enhancement of oil refining: precision catalytic polymerization and multi-dimensional space polymer. As to the precision catalytic polymerization, the paper is aimed at developing base technologies for the molecular weight and stereoregularity by which remarkable improvement in performance of addition polymerization type polymer can be expected, and on the development of a polymerization catalyst which arbitarily controls the primary structure such as end group structure and of a precision addition polymerization process. Subthemes are addition polymerization with limit and oriented catalytic polymerization. In relation to multi-dimensional space polymer, the paper is aimed at developing highly selective polymerization technology of aromatic compounds using enzyme related catalysts and synthesis technology of regular structure polymer, and synthesis technology of new polymer group having a new chain pattern except covalent bond/new polymer group having characteristics in three-dimensional space geometric structure. 244 refs,, 160 figs., 94 tabs.

  4. Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

  5. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of silicon-based polymeric materials (development of liquid methane fueled aircraft engine); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo / Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (methane nenryo kokukiyo engine kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This R and D aims at establishing the basic technology on the molecular design, synthesis, use as materials, and evaluation of silicon-based polymers, of which excellent electronic/optical functions, high heat-resistance/combustion-resistance/dynamic characteristic are expected. The paper introduced the results of the fiscal 1997 R and D of them. The themes are as follows: technology of synthesis of silicon-based polymeric materials with sea-island microstructures, interstitial type structure forming technology, composite materials with organometallic complexes and silicon-based polymers, silicon-based polymer structural materials with ring structures, optimization of the Wurtz`s synthesis method of silicon-based polymers, unsaturated and hypercoordinate organosilicic compounds, function of silicon-based polymers, synthesis and polymerization of new silicon-based monomers, development of a new synthesis method of polysilane and the function, development of new application of silicon-based polymers in imaging devices for recording/memory/display of information, molecular design of {pi}-conjugate and {sigma}-conjugate compounds including silicon, and conformation and electronic state of silicon-based polymeric materials. 186 refs., 141 figs., 68 tabs.

  6. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (R and D of the formation of advanced materials for power generation environment); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Ten nanoscale Ge islands were successfully formed in proper positions on an Si substrate surface by using mask technology of nanoscale atomic layers. Growth of less-defect ZnSe films on a GaAs(110) surface was possible under various conditions. The magnetic transfer mechanism of Mn oxide with huge reluctance was clarified. Through study on selective-area deposition of Si on plasma-oxidized ultrathin SiO2 mask layers patterned by direct electron-beam exposure and an idea of SiO2/SiNx bilayer mask, direct use of the ultrathin mask layer as insulating layer in device structure was achieved. The superior property as electron beam resist of methano- fullerene composed of fullerene C60 with side chains including oxygen was clarified. The initial oxidation process of an Si(100) surface was analyzed, and the observation result by SREM was theoretically explained. Development of a high-resolution spin polarization electron microscope was also mentioned. 48 refs., 145 figs., 20 tabs.

  7. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

  8. Fiscal 2000 survey report on rationalization project for international energy conservation, technological dissemination project for international energy conservation, and Green Helmet Project. Japan-China alternative energy seminar/waste disposal; 2000 nendo kokusai energy shiyo gorika nado taisaku jigyo, kokusai energy shohi koritsuka nado gijutsu fukyu jigyo, green helmet jigyo chosa hokokusho. Nicchu sekiyu daitai energy seminar haikibutsu shori

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper explains the Japan-China alternative energy seminar (February 28 and March 1, 2001, at Beijing). The purpose of the seminar is to introduce systematic and three-dimensional or land/sea/air measures for waste disposal including recycling in Japan, to provide guidance of measures in improving recognition and methods for waste disposal in China, and also to contribute to the dissemination and promotion of a model project for effectively utilizing waste heat from rubbish incineration, a project being implemented in Harbin City now. The activities of NEDO were introduced, with emphasis placed on a model program, called Green Aid Project, for managing heat from waste incineration. On the subjects of sustainable development, urban environment, and energy, the policy of China's tenth five-year plan was demonstrated, and the treatment of wastes in China was also explained. The present state of waste processing in Japan was introduced, as was its maintenance of the facilities. Concerning Japan's waste processing technologies and characteristics of the equipment, there were presented non-incineration processing including crushing/separating, RDF, compost, methane fermentation, etc.; incineration plants; and each of the technologies such as combustion, exhaust gas, ash treatment, use of remaining heat, and gasification melting. (NEDO)

  9. Report on the survey in fiscal 1998. Basic survey on promotion of the joint implementation (a survey on improvement in wastes treatment system in Tapioka starch manufacturing plants); 1998 nendo chosa hokokusho. Kyodo jisshi nado suishin kiso chosa (Tapioka denpun kako kojo no haikibutsu shori no kaizen chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to promote the joint implementation based on COP3, a survey and a discussion were given on improvement in wastes treatment systems and reduction of greenhouse effect gas emission in Tapioka starch manufacturing plants scattered in Indonesia. Currently, the wastes are disposed untreated, discharging methane gas into atmosphere as a result of putrefaction and contamination. Ten factories were picked up as the object of the survey. The following processes are to be adopted as the most suitable method for treating waste water and waste substances: solids (peels and fibers) are composted, and rinsing waste water is subjected to simple aerobic treatment; purified waste water is recovered of methane gas by means of anaerobic treatment; and the reduction amount of greenhouse effect gas converted to CO2 is estimated to reach 314,824 tons per year in total of the ten factories. If the carbon dioxide discharge right can be transacted at a sales price of a dollar per ton, assuming the compost sales price at 200 Rp./kg, the IRR will be 10% or higher, making the project very highly profitable. An IRR of 8% may not be assured unless the discharge right can be sold at 5 dollars per ton if the compost sales price is 150 Rp./kg. The Indonesian Government expects financial assistance from Japan for the pilot plant demonstration. (NEDO)

  10. Environment-friendly type energy and coordinated community development project. Feasibility study for industrialization of high efficiency waste-fired power generation system using general and industrial RDF; Kankyo chowagata energy community keisei sokushin. Kokoritsu haikibutsu hatsuden (ippai RDF sanpai riyo) jigyoka FS chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report presents the feasibility study on the waste power generation which is based on co-firing of the solidified fuel, RDF, obtained from general waste from 30 municipalities in Kochi Prefecture with combustible industrial waste. To maximize the power generating efficiency, the turbine inlet vapor condition is set to around 40 atg/400 centigrade. A bag filter is used for the exhaust gas treatment. A rotary kiln type or a fluidized-bed type is used for the incineration of RDF with industrial waste. The rotary kiln is provided with a stoker for post-combustion thereby supplementing the defect that is easy to cause an imperfect combustion. Additionally, some manufacturers make the rotary combustor of a water-wall construction fit for practical use, thereby further improving the rotary kiln. For the fluidized-bed furnace, the in-layer circulation type is made fit for practical use, thereby improving a stir effect. The power generation cost is estimated at 17.9 to 20.4 yen/kWh. Ten percent decrease of the facility cost by the government support can reduce the power generating cost by 1 to 2 yen/kWh. The increase of 1,000 yen/t of the industrial waste disposal fee can reduce the power generating cost by 0.6 to 0.8 yen/kWh. 19 figs., 26 tabs.

  11. Report on a project to support promotion of forming an environmentally friendly energy community. Survey on business feasibility of electric power generation utilizing combustible wastes solidified fuel in the Kishu and Kumano living area; Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Kishu Kumano seikatsuken'iki ni okeru kanensei haikibutsu kokeika nenryo riyo hatsuden jigyo no jigyoka kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Surveys and discussions were given on business feasibility of a wide area RDF power generation system in the Kishu and Kumano living area. The discussions dealt with as wide area as transcending prefectural borders and including the southern parts of Mie and Nara Prefectures with the city of Shingu as the central part. Wastes generation amount is estimated to be about 70,000 tons at the present as wastes that can be turned into RDF, and to be decreased to 67,000 tons in 2018. The manufactured RDF has calorific power of 3500 to 4500 kcal/kg, two to three times greater than that of wastes. The RDF manufacturing facilities installed in cities, towns and villages have capacity of 30 to 50 tons a day, with that in the city of Shingu being the largest at about 78 tons a day. Transportation can be implemented most efficiently when road transportation is used. The RDF power generation system will consist of a fluid bed furnace, a plasma type ash melting furnace, and a bag filter plus activated carbon absorbing tower. The RDF manufacturing cost will be 27,900 yen per ton of wastes in the case of the city of Shingu. In terms of business profitability, the RDF power generation must find sources to pay 21,400 yen per ton of RDF even if the power sale revenue is considered. (NEDO)

  12. Development of hydroponic system using agriculture waste. 1. Characteristics of rice husk charcoal as growth medium and vegetable growth; Suiko saibai ni okeru haikibutsu riyo gijutsu no kaihatsu. 1. Momigara kutan no baichi to shite no tokucho to yasai no seiiku

    Energy Technology Data Exchange (ETDEWEB)

    Terazoe, H.; Nakaya, K.; Okano, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1994-06-01

    Experimental researches were made on rice husk charcoals processed to be used as culture media for hydroponics. Rice husk charcoals with a size of 1 mm or larger retaining the original shape of the rice husk, and with a size of smaller than 1 mm were made for use in the experiment. In the culture media made of these rice husk charcoals, the charcoal with a particle size greater than 1 mm had more air portion than water portion at 6 cm above the water level, and the charcoal with a particle size smaller than 1 mm had poor air permeability. According to the result of immersing the rice husk charcoal in a culture solution, phosphoric acid ion and manganese in the solution decreased by about 35% and calcium by about 10% in the duration of 120 minutes, as a result of having been adsorbed into the rice husk charcoal. On the other hand, chloride ion increased by about 80% and potassium and iron by about 30%, because of having been dissolved out from the charcoal. In cultivating spinach, butterhead lettuce and radish in the rice husk charcoal culture media, the culture medium with charcoal smaller than 1 mm resulted in harvest reduced by about 75% in spinach, and about 10% in butterhead lettuce. 15 refs., 13 figs., 11 tabs.

  13. FY 1999 cooperation program - Comprehensive research cooperation in environmental technology. Research cooperation in toxic/hazardous waste management in the Laguna de Bay region; 1999 nendo kenkyu kyoryoku jigyo. Kankyo gijutsu sogo kenkyu kyoryoku - Raguna ko chiiki ni okeru yudoku yugai haikibutsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of establishing preventive measures for water contamination in the Laguna de Bay region, the Philippines, where the water contamination is in progress and the eutrophication is feared, a research cooperation project was carried out on the water quality contamination monitoring technology (measuring method/analysis method/prediction method). In the survey of the state of generation of toxic/hazardous waste, the following were grasped based on the existing data: amount of use of toxic/hazardous substances in factories, state of generation of waste, situation of the processing/disposal, etc. In the detailed survey of the situation of pollution in the Laguna de Bay region, specimens of water quality and bottom material were collected from the lake and rivers thereinto, and qualitative/quantitative analysis of contaminants was made using atomic absorption spectrophotometer and gaschromatograph mass spectrometer. As to the evaluation of pollutant sources and control method, the paper conducted the introduction of measures generally taken against pollutant sources, study of a method to grasp the behavior of contaminants by the environmental assessment method for the closed water area, etc. The training was also conducted for researchers/engineers widely in charge of management of toxic/hazardous waste in the Philippines. (NEDO)

  14. Survey for making a data book on the new energy technological development. Waste-fueled power generation, solar heat utilization, geothermal power generation, clean energy vehicles, coal liquefaction/gasification, and traversal themes; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika, gas ka oyobi odanteki tema

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper concerns the following six fields among the fields of new energy technology: the waste-fueled power generation, solar heat utilization, geothermal power generation, clean energy vehicles, coal liquefaction and coal gasification. The up-to-date data made public were collected and classified into the following items: outline of systems, specific examples of the introduction in Japan and other countries, policies/laws and rules/subsidy systems, production quantity/actual amount of introduction/projected amount of introduction (target), cost, terminology, listing of main related companies and groups, etc. Further, arrangement was traversally conducted on the outlook of the energy introduction by the Japanese government and measures taken for development of new energy by Japan and other countries. Namely, the items of the book are as follows: classification of new energy, outlook for energy supply/demand, cost of new energy technology (power generation) and outlook for the introduction, menus of buying surplus electricity of electric companies, policies/laws and rules/subsidy systems concerning the new energy introduction in Japan and overseas, and a list of organizations engaged in the new energy technological development.

  15. Fiscal 1997 report on the survey for a data book on new energy technology development. Waste power generation, solar energy utilization. geothermal power generation, clean energy vehicles, coal liquefaction/gasification, and traverse themes; 1997 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika gas ka oyobi odanteki theme)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected and arranged data on new energy technology. As to the waste power generation, in terms of general waste, 161 places have power generation facilities, 657,000 kW in output, as of the end of FY 1996. Out of them, 100 facilities (scale of output: 555,000 kW) are selling power. In terms of industrial waste, 53 places (209,000 kW) have power generation facilities. The output will be 2 million kW in FY 2000. In relation to the solar energy utilization, the number of solar systems introduced in FY 1996 is 25,000, that of water heating appliances produced in FY 1996 is 170,000. Geothermal power of 494,000 kW and 37,000 kW was introduced for electric power industry use and private use, respectively. Clean energy vehicles have not been so much spread, but the hybrid car was put on sale in 1997. Concerning the coal liquefaction, the R and D were made at a pilot plant of NEDOL process, and operation started in 1997. As to the coal gasification, investigational study and element study on the demonstration plant are being conducted in FY 1997 and 1998, making use of the research results obtained from the existing pilot plant of coal gasification combined power generation

  16. FY 1998 survey report. Survey to prepare a data book related to new energy technology development (Trends on the waste power generation, solar heat utilization, geothermal power generation, clean energy cars, coal liquefaction/coal gasification and new energy); 1998 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy, jidosha, sekitan ekika gas ka oyobi shin energy kanren doko)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Together with the progress of technology development, policies for the introduction/promotion of new energy technology are being developed such as promotion of the commercialization development, revision of the law system, and expansion of the subsidy system for promotion. To push the introduction/promotion forward more effectively, it is necessary to arrange various kinds of data comprehensively/systematically and to make them the basic data for contribution to the spread/education. As to the six fields of the waste power generation, solar heat utilization, geothermal power generation, clean energy cars, coal liquefaction, and coal gasification of the technology fields of new energy, this report collected/arranged the data made public recently in terms mainly of the following: trends of the introduction in Japan and abroad, policy/law/subsidy system in Japan and abroad, cost, system outline, basic terms, a list of the main affiliated companies and groups, and the nation's outlook for energy introduction and policies of each new energy technology in Japan and abroad, and the trends. Moreover, characteristics by field were described of the state of the commercialization/introduction of new energy technology. (NEDO)

  17. Industrial and scientific technology research and development project fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Report on research and development of a brain type computer architecture `trial fabrication and high-level evaluation on chips for a large-scale artificial neural system` and on results of evaluation studies on the chips; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Nogata computer architecture no kenkyu kaihatsu `daikibo jinko shinkei kairo system yo chip no shisaku to kodo hyoka` chip hyoka kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to develop a brain type computer architecture, a brain mimic processor (BMP) has been developed (which was made in LSI in fiscal 1997), and studies are being made on developing its applications. Development has been made on an element in which linkage of one million cells with one thousand neural cells can be realized. Evaluation substrates mounted with the BMP, control software, and compilers were provided to 15 organizations including the National Research Institutes, universities, corporations, and other societies (for 19 themes) to evaluate capability of the LSI and its application development. All of the research organizations are using these items utilizing features of the LSI or the network for such purposes as learning, storage, recognition and control. The applicable theme may include infrared spectrum pattern recognition and domain division of document images using neural network functions. It can also include structural analysis of mass spectrum molecules, time series pattern recognition, location of corresponding points in images, estimation of moving images, satellite control, character recognition, short time storage, long-term association memory models, and invention process studies, all utilizing the functions of the BMP. 71 refs., 89 figs., 9 tabs.

  18. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO (book on the handling / gas lift system). Report on the results of the R and D of the overall base technology of ocean resources (R and D of submarine oil drilling technology, etc.); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (kaitei sekiyu kussaku gijutsu nado kenkyu kaihatsu) seika hokokusho (handling / gas lift system hen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper conducted a R and D on the handling of drilling equipment in drilling/collecting of submarine oil and the gas lift of artificial oil extraction technology. As to each equipment of a barge style handling system, conducted were assembly/adjustment/trial run on land and pipe handling experiments on sea. In the experiment, confirmed were pipe transfer function, lifting function, fitting function, grasping function, etc. In the ocean experiment, studied were pipe bending stress, Karman vortex control effects, etc. Relating to the gas lift system, experiments were made on confirmation of fabrication/performance of air compressor. Moreover, a technique of air transportation to the blowing inlet of the gas lift pipe was established by developing an air blowing system and fabricating a long-distance flexible pipe. Concerning the gas/liquid/solid three-phase separator, a cyclone separator was developed, and improvement in lifting efficiency was confirmed. Helped by these, the problems of the gas lift system were almost solved, and a possibility of the commercial-base production system was obtained. 2 refs., 182 figs., 47 tabs.

  19. Fiscal 1997 project on the R and D of industrial scientific technology under consignment form NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of molecular harmonized materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) bunshi kyocho zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    By establishing microtechnology using molecular-level bottoming-up (molecular harmonization) by imitating the system of living organism, the paper described the R and D of molecular harmonized materials aiming at developing high-functional/high-performance materials such as high-performance catalyst, photo-information functional materials and sensing materials. Under consignment from NEDO, Japan Chemical innovation Institute started the 5-year plan in fiscal 1997. Self-assembled molecular films, in which organic molecules are orderly arranged by self-assembly, aim at developing new memory/optical/sensing materials. Mesophase materials which are such materials as liquid crystal showing the intermediate state between solid and liquid, develop optical/photoconductive materials using precise molecular orientation controllability. Macroporous materials are such substances as zeolite having molecular size micro pores. The paper aims at establishment of synthesis techniques of them and development of high-performance catalyst, etc. using them. In the comprehensive investigational research, conducted was a survey of the trend overseas in addition to a study of subjects in question. Further, the supporting basic study was reconsigned to universities, etc. 57 refs., 62 figs., 17 tabs.

  20. Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of multi-stimuli-responsive materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described multi-stimuli-responsive materials out of the technology developments for creating original high-functional materials under the system of R and D of industrial scientific technologies. These are materials which repeatedly reproduce functions such as separation, penetration and movement in response to stimuli by imitating living organisms. In relation to polymer multi-stimuli-responsive materials, various copolymers were synthesized using N-acetyl (meta) acrylamide, of which the synthesis method was established in the previous fiscal year, as a main component, and thermal responsive polymer with upper critical solution temperature which becomes a base of separation functional materials was searched for. By immobilizing it with molecular recognition ligand, measured was thermal dependence of affinity of the immobilized matter to albumin. Also studied were molecular recognition cell adhesion/separation functional materials. Concerning composite multi-stimuli-responsive materials, with the use of silica microcapsule surface-immobilized with silane coupling agent, studied were the optimum conditions for immobilizing thermo-responsive polymer to the surface of the capsule. Using motion functional materials by ion exchange resin, obtained was motion functionality which is satisfactory at the state of practical use. 94 refs., 82 figs., 16 tabs.

  1. Ultra-Fine Friction Grinding of Sunflower Kernels – Thereof Tahini and Halva Production and Rheological Characterization

    OpenAIRE

    Emil RACOLŢA; Elena Andruța MUREȘAN; Andrei BORȘA; Romina Alina VLAIC; Vlad MUREȘAN

    2016-01-01

    Tahini is a paste obtained by milling the roasted sunflower kernel. Usually, a time and energy consuming two-steps process is involved, a three-roll refiner and a beating machine. The aim of this work was to identify and test a milling process for roasted sunflower kernels with lower time and energy consumption. Different particle size sunflower tahini and halva samples were produced by Ultra-Fine Friction Grinding machine Masuko Sangyo “Supermasscolloider” MKCA6-2 and compared to standard te...

  2. Energy Demand and Resources of Japan. Volume 2

    Science.gov (United States)

    1973-08-01

    finally through an aqueduct to a run-of-river plant using either Francis or Kaplan (propeller) turbines. In such areas, by the time it reaches sea level...the present level of $8 per po ^nd UoOg to $16 per pound b’gOg, power costs would be affected by less tlan ten percent. This is quite important to...of Energy in Japan. Tsusho-Sangyo Kenkysha, Tokyo, November 1972 (in Japanese). "Yama to Keikokusha" (Mountain and Valley ), a Japanese magazine

  3. Achievement report on industrial science and technology research and development in fiscal 2000. Research and development of synergy ceramics (Research and development of technology to prevent corrosion in petroleum production systems); 2000 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (sekiyu seisan system fushoku boshi gijutsu kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Achievements in fiscal 2000 were put into order for research and development of synergy ceramics aimed at completion of high temperature energy materials and ultra-precision materials. Activities were taken in the following four areas: 1) materialization technologies and advanced assessment and design technologies, 2) application technologies, 3) common basic technologies, and 4) assessment on composite function manifestation process. In Item 1), discussions were given on ultra-precision materials, high temperature energy materials, member designing basic technologies, materials to detect stress and microfine destruction, pore pattern controlling porous materials, and self-restoration and self-lubrication functioning materials. In Item 2), discussions were given on material and light selection functioning materials, high abrasion resistant and easy-to-process materials, high performance resistance materials for electric power devices, and flexible sliding materials. In the material and light selection functioning materials, their material selecting function was manifested by controlling micro pores through xerogelation on inorganic and organic hybrids. In the assessment of the composite function manifesting process, the wet type forming process was assessed, that uses microfine powder for model parts assuming cut members. (NEDO)

  4. FY 1998 result report. Report on the results of the examinational research on the trend of technology development in the iron/steel industry; 1998 nendo seika hokokusho. Tekko sangyo no gijutsu kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The trend of the technology development in the Japanese iron/steel industry was compared with those in foreign countries and surveyed to increase the international competitive strength. From the viewpoints of technology, industry and goods, the iron/steel field was characterized based on the statistic data, and especially automobile use steel materials were selected such as cold rolling high tension steel sheet, surface treated steel sheet, and bearing sheet. The analysis of factors of competitive superiority was conducted, and the following were presented: measures for process continuation, and measures taken from the age of equipment and cost indexes. The paper also surveyed the trend of pig iron making/steel making technology in Asia. The present international technical competitiveness in the iron/steel industry in Japan, especially of automobile use steel sheet, is very high. This is because of the well-functioned demand-oriented development, and also as a result of the mutually influentially conducted equipment development such as process continuation and development of new goods, supposing the iron/steel continuous process and reduction in impurities. However, fears are the stagnation in the recent technical development strength and the saturation of new equipment. Moreover, the further heightening is needed of the international cost competitive strength of general-purpose products. (NEDO)

  5. FY 2000 Project of developing international standards for supporting new industries. SMIL tag standard of the three-dimensional image data, based on MXL; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. XML wo base to shita rittai eizo data SMIL tag tsuke kikaku no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This project is aimed at proposals of the standards for utilizing three-dimensional images for multimedia presentation on the Internet. Described herein are the FY 2000 results for proposal of SMIL (synchronized multimedia integration language) tag standard of the three-dimensional image data, based on XML which is the next generation standard of HTML, and research and development of the generated editor of tag data for the three-dimensional images, three-dimensional QuickTimeVR player and three-dimensional MPEG player. The FY 2000 efforts are directed to the examination/proposal of the tags for three-dimensional images which are not defined by the present XML and SMIL, based on which the tag editor is developed. The other efforts include survey on the latest situations around the standards and trends of the Web and three-dimensional data; and development of the player and browser of SMIL tags, both for three-dimensional images. The efforts for the international standardization include preparation of the three-dimensional standard drafts for displaying various media data in the three-dimensional world, which are submitted to the W3C members to sound their opinions, and collection of related information. (NEDO)

  6. Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

  7. Achievement report on research and development of the industrial basic technologies of the next generation in fiscal 1985. Research and development of composite materials (Separate edition (1)); 1985 nendo jisedai sangyo kiban gijutsu itaku kenkyu seika hokokusho. Fukugo zairyo no kenkyu kaihatsu (bessatsu 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-03-01

    Described herein are the results of the research and development project for developing composite materials as the basic technologies of the next generation, for patent/utility application situations, know-how techniques, processing procedures, computer code lists, and database/file lists. A total of 81 inventions are applied for patents and 3 inventions for utilities, of which 8 inventions are applied to the foreign countries. The know-how techniques developed by the project include basic testers for continuous molding of closed sections, systems for continuously withdrawing the molded articles, hot rolling molding processes which use no rolling jigs, and HIP processes for aluminum-based powders. A total of 10 processing procedures are drawn, including those for monolithic molding of panel structures, monolithic molding of planar and angled PGI/CF, production of carbon fiber/aluminum-based wire reforms, pressing, rolling, HIP molding, and melt/extrusion molding. The computer code lists include strength/rigidity/vibration optimization programs, buckling optimization programs, and impact analysis/two-dimensional of the composite materials. (NEDO)

  8. FY 1999 project on the development of new industry support type international standards. Standardization for high-interoperability of optical disk systems; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Hikari disk system no sogo un'yosei kakuho no tame no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The R and D were conducted on the standardization for interoperability of optical disk system, and the FY 1999 results were summarized. In the study, for the volume/file structure specified by ISO/IEC 13346, the development of standards was made for interoperation of the UDF specified by OSTA. In this fiscal year, to avoid the problem on non-interchangeability of UDF which actually exists, enhancement of functions of a test tool for UDF interchangeability was tried. Namely, development was carried out of UDF interchangeability test tool, UAF related standards, and UAF related standards assessment system. Especially, it was formally announced that UDF security enhancement of UAF related standards will be included in UDF2.x in the OSTA conference held at the end of FY 1999. Also, a draft on the standard information was drawn up domestically. The standards including API are expected to be established as standards through activities in the next fiscal year. (NEDO)

  9. Fiscal 1999 technical achievement report. Development project on prompt-effect international standards for developing new industry (Standardization of methods for evaluating performance of fabrics equipped with special functions); 1999 nendo shinki sangyo ikusei sokkogata kokusai hyojun kaihatsu jigyo seika hokokusho. Tokushu kino sen'i seihin no seino hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    No method is available for quantitatively evaluating the performance and safety of antibacterial fabrics, and the lack impedes smooth implementation of international trade. As a measure to remedy the fault, a test method is developed for quantitative evaluation, and presented for acceptance as an international standard. In the proposed antibacterial test, 2ml of liquid with its bacterial population increased to 10{sup 4}/ml in a preculture is filtrated under reduced pressure for the trapping of bacteria in the filter paper, the paper is scrubbed by a test cloth for transfer, the cloth is left in a constant-temperature constant-humidity chamber, and the bacteria are washed out and then counted by chemiluminescence. The change in the number of bacteria thus determined is used to quantify the antibacterial feature. Safety is examined by a skin irritancy test method using a cultured skin model. A specimen is attached to a cultured skin model, left in a constant-temperature constant-humidity chamber for a specified time period, and then peeled from the model. The cultured skin model is dyed by an MTT enzyme. Unaffected live cells are dyed violaceous by the MTT enzyme. Dyed cells are solvent-extracted, and the number of dyed cells is determined by colorimetry. The number of cells remaining alive is compared with a reference specimen for the determination of the degree of safety. (NEDO)

  10. FY 1999 project on the development of new industry support type international standards. Standardization of evaluation method of the genetic testing system (Separate volume); 1999 nendo shinki sangyo shiengata kokusai hyojunka kaihatsu jigyo seika hokokusho. Idenshi kensa system no hyoka hoho no hyojunka (bessatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The separate volume included the proceedings of the re-consignee joint meeting on the standardization of evaluation method of the genetic testing system, the proceedings/data of the meeting of the committee of the standardization of evaluation method of the genetic testing system, etc. The data of the meeting are about a plan to execute the standardization of evaluation method of the genetic testing system, standardization of forms for reporting the results of the genetic test, a trial guideline for standardization of the genetic testing, standardization of evaluation method of the genetic testing system, etc. Moreover, the volume included 11 literature papers overseas on the above-mentioned themes, 'reports on the surveys in Europe and the U.S. on the standardization of evaluation method of the genetic testing system,' etc. (NEDO)

  11. FY 1998 industrial technology R and D project. Report on the results of the development of utilization technology of biological resource such bioconsortia system (Development of production technology of biological use petroleum substituting fuels); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Technology development was conducted for production of useful substances using the bioconsortia system. In FY 1998, the development of element technology was studied. As to the utilization technology of gut symbiotic microorganisms such as termite and longhorn beetle, clone types of gut microorganism complex system were analyzed to find out the diversification. In the decay of wood, co-culture of two species of mold fungus was increased in efficiency than single culture. More than 90% was classified/identified of the mold fungi accumulated (in wood piece)/separated for the utilization of plant symbiotic microorganisms. For the production of petroleum substituting useful resource, conditions were established of callus induction from immature embryos of tropical oil crops, especially oil palm, and of regeneration of a lot of small plants from the callus. To establish the Agrobacterium-mediated transformation system of oil palm, the binary vector harboring the reporter gene and selectable marker gene was constructed. Using the vector, oil palm tissues are inoculated and infected with agrobacteria. To heighten the function of palm oil, 10 particular clones were selected from the complementary DNA library obtained from oil palm fruit tissues. The genetic study of germs was also made. (NEDO)

  12. Fiscal 1997 R and D project under a consignment from NEDO. R and D of the femtosecond technology; 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Femto byo technology no kenkyu kaihatsu (femto byo technology no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Ultrahigh-speed electronic technology is indispensable for creating industrial basic technologies supporting the advanced information society in the 21st century. Control technology of photonic and electronic states in a femtosecond region is essential. To establish the development policy of generation and transmission devices for femtosecond light pulses, research and analysis were made on nonlinear optical response and light pulse transmission properties. Basic issues on devices and materials such as mode-locked semiconductor laser, pulse compression device and light-light modulation material for coding were extracted. For new femtosecond light pulse control/distribution devices, research and analysis were made on response properties of intersubband transition phenomena in a semiconductor and electron spin relaxation phenomena, and semiconductor quantum structure. To develop metrological technology using ultra-short light pulse, study was made on an evaluation method for time- fluctuation of pulses in 100 femtosecond level. Generation of femtosecond high-intensity X-ray pulse was possible by fine control of the existing high-intensity laser. 19 refs., 26 figs., 1 tab.

  13. Survey report for fiscal 1997 on the survey report on the actual state of technical cooperation on industrial technologies by European countries in the South-eastern Asian region; 1997 nendo Tonan Asia chiiki ni okeru Obei shokoku no sangyo gijutsu ni kansuru gijutsu kyoryoku jittai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The actual state was surveyed on the technical cooperation by European countries in the South-eastern Asian region. The U.S.A. is making research cooperation with Thailand on ethylene molecule structures to enhance productivity in rubber production, France on molecule markers for high production rubber clone selection, and Australia on grain storing and drying methods. For the Philippines, America is giving assistance on management of reproducible resources, France on climate information communications systems for local areas, Australia on grain storing and drying methods, and Germany on waste oil recovery and reutilization, and development of pollution-free energy resources. For Malaysia, the Great Britain is cooperating on building engineering research centers, Australia on search for plant patheology genetic organics available in the Pacific region, and Germany on investigative researches on pollution prevention for tin mines and processing areas, and forestry and plant information systems. With respect to the ASEAN, this paper reports its activities placing importance on biology and electronics engineering, while the organization is taking actions in the areas of foodstuffs, animals, electronics, information and material science, energy exploration, marine and earth physics, and resource development. (NEDO)

  14. Fiscal 2000 achievement report on research and development of industrial technologies. Research and development of synergy ceramics (Research and development of ultrahigh temperature gas turbine for power generation); 2000 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (hatsuden'yo chokoon gas turbine no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The fruits of fiscal 2000 efforts to develop high temperature energy materials and ultraprecision materials are briefly described. Activities are conducted in the four fields of (1) materials derivation and advanced evaluation/design technologies, (2) application technologies, (3) common base technologies, and (4) multifunction realization process evaluation. Discussed in field (1) are high temperature energy materials, high performance active materials, fundamental technologies for member designing, active materials for dealing with environmental gas, silicon based high resistance energy materials, porous multiple layer ceramic materials, macro-/micro-scale stress analysis technology, and microfracture analysis technology. Discussed in field (2) are heat resistant and damage tolerant materials, heat shielding materials and energy absorbing materials, and nanofilter materials capable of selective separation. In the study of active materials specific for environmental gas, a catalyst is developed, stable at high temperatures and capable of treating NOx selectively. The catalyst is a layered product comprising Ba hexaaluminate layers and stabilized zirconia layers. (NEDO)

  15. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

  16. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (development of high-efficiency production process technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (kokoritsu seisan process gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Development is made of high energy-efficiency laser processing technology and high efficiency/high grade photon generation/control technology as laser light source, for the purpose of energy conservation/efficiency heightening of production processes which require a large amount of energy such as welding, joining, surface treatment, and particle fabrication. As to keyhole dynamics of the molten metal generated on the laser weld, construction of simulational mathematical models was started. Equipment to fabricate semiconductor ultrafine particles which become the core of quantum dot functional structures was designed to fabricate particles. In-situ optical measuring technology was studied of element/size of particles of below 30 nm in size by emission spectroscopy associated with the plasma irradiation. As tightly focusing all-solid-state laser technology, studied was the wavelength conversion method in which harmonics are generated four times as much as the fundamental wave due to high efficient generation of high power UV laser. Also studied were high laser strength, low optical losses, conditions for fostering high homogenity crystals. Technology for high accuracy processing of element surface was established. High efficiency photon generation technology was comprehensively investigated. 140 refs., 276 figs., 46 tabs.

  17. Fiscal 2000 project for development of international standards for supporting novel industries. Standardization of production process system (Development of basic STEP standards); 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo. Seisan process system no hyojunka (STEP kiban kikaku no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts are under way to develop STEP (standard for the exchange of product model data) of ISO-10303 into specifications for expressing the total life cycle of products from designing, manufacturing, to disposition. Japan's study centers about product model expression involving 'thing-making for machine products.' In the study, the functions of the mechanical production process system ranging from designing to manufacturing were analyzed, and the results were built into an integrated application activity model (I-AAM). The I-AAM was analyzed, and an assembly model capable of expressing detailed relations between parts, such as mechanical linking and binding, was developed, and the model was accepted as a new work item at TC184/SC4 in February 2001. In relation to the parametric assembly of Part 108, moreover, the fruit of this research and development effort was adopted. In relation to manufacturing, problems were extracted involving important production designs between the processes of designing and manufacturing. They were raised at SC4, and a data model was proposed. (NEDO)

  18. Industrial science and technology research and development project of university cooperative type in fiscal 2000. Report on achievements in semiconductor device manufacturing processes using Cat-CVD method (Development of technology to rationalize energy usage); 2000 nendo daigaku renkeigata sangyo kagaku gijutsu kenkyu kaihatsu project. Cat-CVD ho ni yoru handotai device seizo process seika hokokusho (energy shiyo gorika gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The catalytic chemical vapor deposition (Cat-CVD) method is a low-temperature thin film depositing technology that can achieve improvement in quality of semiconductor thin films and can perform inexpensive film deposition in a large area. This paper summarizes the achievements in fiscal 2000 in the demonstrative research and development theme of the present project, centering on the following five areas: 1) discussions on application of the Cat-CVD method to the mass production process for gallium arsenide integrated circuits, 2) studies on the possibility to apply the Cat-CVD method to the process to fabricate nitrided silicon protective film for ferroelectric memory devices, 3) formation of nitrided silicon films for silicon integrated circuits by means of the Cat-CVD method, and development of a chamber cleaning technology, 4) fabrication of high-mobility poly-crystalline silicon thin film transistors formed by using the Cat-CVD method and large particle size poly-crystalline silicon films by using the catalytic chemical sputtering process, and 5) discussions on properties of amorphous silicon thin film transistors formed by using the Cat-CVD method and formation of large area films by using a catalyst integrated shower head. (NEDO)

  19. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on second term final research and development (first report); Jisesdai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu bunshi bunrimaku zairyo (dainiki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    This study is intended to establish a basic technology for innovative high-efficiency separation membrane materials that can be used in areas in which application of membrane separation has been impossible. The water/ethanol separation membrane (for water selective permeation) and water/acetic acid separation membrane (for water selective permeation) achieved separation coefficient and permeation velocity of the world's highest level. The water/ethanol separation membrane (for ethanol selective permeation), although its separation coefficient is lower than the world's highest performance, has high permeation velocity, providing the performance of the worldwide level as seen from the comprehensive viewpoint. The carbon monoxide/nitrogen separation membrane achieved separation coefficient and permeation velocity of the world's highest level. The oxygen/nitrogen separation membrane requires further enhancement in the permeation velocity and stability. Establishment has been performed on separation technologies for membrane separation of non-water soluble aqueous solutions, optical division by using chiral crown ether, high-performance liquid separation by means of plasma surface treatment, and particle separation. Basic analysis has been advanced also on evaluation technologies for gaseous body separation membrane and liquid separation membrane, of which future progress is expected. (NEDO)

  20. Present status of and subjects on the industrial utilization of polymer separation membranes. Reuse of wastewater and recovery of resources using membrane technology; Kobunshi bunrimaku no sangyo riyo no genjo to kadai. Haisui sairiyo shigen kaishu bun`ya ni okeru makuriyo

    Energy Technology Data Exchange (ETDEWEB)

    Okuno, Y. [Hitachi Plant Engineering and Construction Co. Ltd., Tokyo (Japan)

    1998-07-05

    Membrane technology is introduced, involving the recovery of metal from wastewater after plating and of paint from wastewater after electrodeposition painting, and reuse of wastewater from buildings as water for miscellaneous use and of treated sewage for improving recreational water environments. For wastewater from planting, a recovery tank is provided right after the metal plating bath. The content of the tank is removed of organic matters by active carbon and then subjected to electrodialysis, and becomes roughly equal in concentration to what is in the plating bath. In the process of electrodeposition painting, the object to be plated is immersed in a tank and then taken out for washing in water. Paint is recovered at a rate of 98% or higher from the wastewater by a combination of ultrafiltration and reverse osmosis membranes. Wastewater from buildings after activated sludge treatment is subjected to microfiltration or ultrafiltration using membranes, to be reused for miscellaneous purposes for the building. As for treated sewage, it is further treated using a combination of microfiltration membranes, or ultrafiltration membranes, and reverse osmosis membranes for use in facilities such as artificial fountains and ponds. A recently developed bipolar membrane decomposes salts in wastewater into acids and alkalis and recover them separately, thereby enlarging the scope of wastewater from which valuables may be recovered. 11 refs., 4 figs., 4 tabs.

  1. Fiscal 1997 Project related to research and development of global environment industrial technologies. Report on the results of works commissioned for research and development of technology for reducing carbon dioxide emissions; 1997 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of achieving reduction in emission of carbon dioxide and fluorocarbons, the `research and development on technologies to reduce emission of carbon dioxide and other substances` consisting of eight projects were conducted. In research and development of waste water treatment technologies using submerged combustion, studies were performed on removal by combustion of such pollutants as organic compounds, nitrogen compounds, and sulfur compounds. The development targets were achieved on each item. In research and development related with thermal electric power generation elements, semiconductor single crystals were fabricated in order to acquire technical knowledge on thermal power generation elements intended of utilizing industrial waste heat, whereas a simulation technology for designing was developed. In other projects, research and development works were carried out on high-performance heat insulating materials, and a movable methanol reformer for fuel cells. Developments were conducted on a large pressure reducing valve, and a cooling and heating turbo heat pump for regional air conditioning facilities. Research and development were made on Peltier elements, all efforts having achieved results respectively. 134 figs., 65 tabs.

  2. Fiscal 1997 report on the results of the cooperative research project under consignment from NEDO on technology for simply setting-up of the molding conditions of engineering plastics; 1997 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (Engineering plastic no seikei joken kan`i settei gijutsu ni kansuru kenkyu kyoryoku jigyo seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A cooperative research project was carried out between Japan and Thailand with the aim of developing a system which can simply set up molding conditions using as elements the technology on mold design and injection molding in plastic parts production and the experiment/evaluation technology for making sure of the quality of molded products. In fiscal 1997, based on the basic plan worked out in the previous fiscal year, molding equipment, auxiliary equipment, mold, experimental equipment, injection molding CEA system, etc. were installed at Thailand`s BSID (Bureau of Supporting Industries Development). Supported by equipment manufacturers, the technical guidance was given for operation/maintenance/control of all equipment. At the same time, researchers were sent from Japan, and the joint research was started. Japan received three researchers from BSID for training of molding technology, injection molding CEA program use technology, and experimental evaluation technology. The engineering plastics used for study are polyacetal, polyamide and polycarbonate. 17 refs., 68 figs., 14 tabs.

  3. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  4. FY 2000 report on the results of the project for the promotion of industrial technology development for the global environment. Project on the investigational research of high technology; 2000 nendo NEDO seika hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo - Sentan gijutsu chosa kenkyu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    High-tech study was conducted for fields of CO2 fixation/effective utilization, technical development of low environmental load substances and technical development of environmentally friendly type production process, and the FY 2000 results were summarized. Out of the proposals for research projects collected in FY 1999, 25 projects that were recognized to be excellent were consigned to contract research. Research Institute of Innovative Technology for the Earth also selected 4 projects for research. Through research activities, 179 projects were made public, and 2 patents were applied for. The number of research themes was 29 including the following themes: development of food resource resistant to the future global environment, study on new circulation type polymer chemical recycling by bio-process, development of dioxin decomposition technology using artificial enzyme and absorption resin, design of rare metal free cathode substance for large lithium ion secondary battery, and reforming of carbon circulation system in the Australian desert by natural humus supply. (NEDO)

  5. FY 2000 report on the survey of the project for arrangement of the basis of the international energy utilization rationalization. Survey of diagnosis of energy conservation in main industries of ASEAN countries; 2000 nendo kokusai energy shiyo gorika kiban seibi jigyo chosa hokokusho. ASEAN shokoku shuyo sangyo ni okeru sho energy shindan chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of securing the stable energy supply/demand and contributing to the sustainable economic growth in ASEAN countries, survey of the diagnosis of energy conservation was conducted. In this survey, the diagnosis on energy conservation was made in terms of typical plants/works jointly with ASEAN-side engineers to grasp the actual state of energy consumption of each of the plants and to give advice on energy conservation policies. The countries and companies selected as objects in this fiscal year are a fiber plant in Malaysia (Arab-Malaysian Development Berhad), a paper mill in Indonesia (P.T.Kertas Leces Pulp Paper Mill) and a cement plant in Brunei (Butra Djajanti Cement SDN BHD). Diagnosis was made for each of them on January 15-19, on January 22-26 and on February 5-9, 2001, respectively. Through Workshops No. 1 (November 2000) and No. 2 (December 2000), this diagnosis program was carried out in 2001. On the basis of the results of the diagnosis, presented were the necessary energy conservation policies to be taken. (NEDO)

  6. FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the bioconsortium system utilization/production technology); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Fukugou seibutsukei riyo seisan gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the functional substance production technology, petroleum degrading/cleaning technology and high-grade utilization technology of the unused petroleum fraction, study was conducted of the culture control technology in substance production and substance decomposition by bioconsortia, and the FY 1999 results were reported. As to the functional material production technology, study was made of the separation/culture technology, functional substance production technology using bioconsortia (control substance searching method in the ocean microbial consortia system, isolation of control substance/structure determination/separation of production bacteria, elucidation of the inter-species communication substance function, heightening of function of the production microbial consortia), etc. Concerning the effective degrading/cleaning technology of petroleum compounds, study was made of the molecular genetic analysis technology, histochemical analysis technology, analysis technology of the solvent resistance mechanism, bioconsortia analysis system technology, global environmental purification technology such as the effective decomposition of environmental pollutants, etc. Relating to the high-grade utilization technology of the unused petroleum fraction, study was made of the chemical analysis of the photolysis crude oil, selection of the decomposition microbial consortia, etc. (NEDO)

  7. Fiscal 1997 report of the R and D result of industrial science and technology. R and D on synergy ceramics (R and D on an ultrahigh-temperature gas turbine for power generation); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (hatsuden`yo chokoon gas turbine no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For development of high-efficiency power generation gas turbines using petroleum substituting energy, the process technology which can highly harmonize conflicting characteristics and various functions was developed for new ceramic materials. This paper summarizes the result in fiscal 1997. On design technology of the characteristics harmonizing process, the design and synthesis of ceramic precursors were made by using chemical reaction of metal organics. On analysis of fracture behavior by controlling microscopic and macroscopic particle shapes, orientations were observed by convergent ion beam. On control technology of a structure formation process, study was made on continuous pore shape control to form porous material with uni-directionally arranged pores in ceramic matrix, interface control between particles to decrease a plastic deformation temperature and improve a heat insulation, interface control between phases of a rare-earth silicate/silicon-carbide-based composite, boundary control between layers of piezoelectric ceramics, and boundary control of the composite where inorganic-organic hybrids occupy the interface between ceramic particles. 79 refs., 193 figs., 15 tabs.

  8. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (R and D of petroleum production system high-grade measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D were conducted of high-strength and high-accuracy welding/joining technology using laser, technology to measure and assess the joining state of structures and defects around the surface of structures and inside structures by high accuracy and high resolution, and technology/equipment to generate a laser light source for the tool, which are all required to remarkably enhance safety/reliability of oil drilling facilities working in the severe environment. In fiscal 1997, as the R and D of oil production system high-grade measuring/processing technology, technical study, study of measures to be taken, operating experiment, assessment, examination, etc. were conducted on the following themes: 1) macroscopic processing technology (R and D of high-reliability laser welding technology), 2) non-destructive composition measuring technology (R and D of internal measurement and photoelectron spectroscopy using short-wavelength radiation), 3) tight-focusing all-solid-state laser technology (R and D of fiber laser), 4) tight-focusing all-solid-state laser technology (R and D of high-efficiency laser diode), and 5) comprehensive investigation of phonics engineering (investigation for photon-applied materials processing technology). 256 refs., 205 figs., 18 tabs.

  9. Fiscal 1998 R and D project on industrial technology. Development report on use technology of bioresources such as bioconsortia (Development of analysis technology of bioconsortia); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For use of advanced functions of bioconsortia (complex microorganisms composed of more than 2 microorganisms with certain specific function), this project analyzes specific functions of specific organisms and the interaction between the specific functions, and develops isolation and incubation technologies of component organisms. In fiscal 1998, to promote this project, the meetings were held frequently in National Institute of Bioscience and human Technology. Study was made on production of useful substances and useful degradation functions in association with bioconsortia. The result showed that microorganisms coexisting with nematode produced physiologically active substances exhibiting antimicrobial activities to tubercle bacillus, MRSA and others, microorganisms coexisting in eggs of some insects produced substances having antiviral activities and activities against pathogenic bacteria in a plant, and microorganisms growing in some plants or mycorrhiza organisms produced insecticidal substances or growing-promoting substance. The basic understanding was obtained on cooperative actions of bioconsortia to bioremediation and degradation of organic substances. (NEDO)

  10. Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Human life engineering field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (ningen seikatsu kogaku bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper describes the surveys in fiscal 1999 on establishing industrial technology strategies in the human life engineering field. The human life engineering is an engineering to identify scientifically humans and their living characteristics, and apply them to products, systems, and environment building. Market size for the human living related industries is more than two trillion yen, whose annual growth rate is 9%. Discussions were given on problems that hinder technological innovations in this field. What lacks is the comprehensive strategic conception, and insufficient is the structural approach by related organizations. Technological systems for designing have not been established, and technological foundations relative to human characteristics and living characteristics are not well arranged. Methods to evaluate research achievements have not been established, and the works on proposing international standards are weak. Insufficiency in human resource nurturing is also an issue. As the future prospect and strategies, such fields as psychology, recognition, and sensitivity are important for the seeds technologies, and so are the measurement of supportive technologies, and information processing. The human living engineering aims at supporting safety, freedom from care, and high-quality life, realizing industrial and technological competitiveness of the world top groups, and forming societies with activity and high quality. (NEDO)

  11. Research report of fiscal 1997. Basic research project on energy saving in developing countries (cooperative research on oil saving / basic research on the industry of Thailand); 1997 nendo chosa hokokusho. Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo sekiyu shohi koritsuka kyoryoku chosa (Taikoku sangyo kiso chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Field research was made for oil saving in Thailand. To promote energy saving in a textile industry as main export industry, its motivation for production stuff is essential in business improvement. Proposal for work improvement, supply system of bonuses, and small-group activity are effective. Management of an energy consumption rate is essential in business management. Use of efficient waste water treatment equipment is also one of the issues. In food factories, various scopes for improvement are still found by mass/heat balance analysis in production process. As an example, a large amount of water is consumed in vain for washing raw rice in a rice powder factory, and separation of SS precipitate from waste water should be improved. Because of lagoon treatment, an effluent standard is not achieved in spite of consumption of wasteful aeration power. This treatment is reasonable because of its scale and site, although the standard can be achieved by activated sludge method. Reconsideration of the standard is also necessary based on a local total BOD load capacity. The profitability of a methane fermentation method should be examined. 72 figs., 95 tabs.

  12. Report on the research and development under a consignment from NEDO of high temperature carbon dioxide fixation and utilization technology for fiscal 1996; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku gyomu seika hokokusho. Nisanka tanso koon bunri kaishu sairiyo gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the prevention of global warming, this R and D is aimed at separating/recovering high temperature CO2 from high temperature gas at 300degC or above and developing technology for effective use of the recovered CO2 as measures taken for reduction in CO2 emissions from the fixed emission sources. In this fiscal year, the following were proceeded with: heightening of separation performance evaluation technology, promotion of technical development of ceramic separation membranes and supports, and development of element technology of modular integration. In the examinational research on separation technology and system optimization, the following were conducted: survey of trends of the technical development, conceptual design of plant and prediction of process behavior, assessment of applicability of the process, and study of effects of utilization/spread of the developmental technology. In the former R and D, borosilicate glass powder rich in alkali is formed on the ring by joining the trially manufactured hollow fiber type membrane and the same form alumina cylinder, and sealing property and strength which stand measurement of permeability were confirmed. In the latter, an innovative process applied with CO2 high temperature separation technology was studied to examine effects of the spread of high temperature gas separation technology. 403 refs., 478 figs., 134 tabs.

  13. Report on achievement in the preceding research related to global industry technologies for the global industry technology research and development project. Research on gas systems substituting global warming gases such as PFC used in manufacturing semiconductors; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Handotai seizo nado ni shiyosuru PFC nado no chikyu ondanka gas no daitai gas system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The present semiconductor manufacturing process uses a great amount of PFC having large global warming coefficients and extremely long atmospheric life. A research was made particularly on reduction of its emission from etching processes. After introducing how the semiconductor industry has been working conventionally on protection of the global environment, this paper makes clear the purpose and positioning of this preceding research, as well as how it is moved forward. The paper also reports the results of analyzing and discussing the exhaust gases from etching devices using several kinds of substitute PFC gases. Survey results are reported on the possibilities of new substitute gases, plasma decomposition and treatment of exhaust gases, reaction process simulation, and in-situ analyzing and evaluating technologies. Investigations were made on the possibility of using no PFC in wiring processes which consume greater amount of PFC, as well as on wiring techniques using inter-layer insulation film with low dielectric rate, a new wiring structure forming technology, new functional elements, circuits and systems in a wide range. Proposals were given on specific research and development themes and plans that begin in fiscal 1999. (NEDO)

  14. Achievement report for fiscal 1998 on the preceding research related to global environment industry technologies. Survey and research on reduction of nitrogen monoxide; 1998 nendo chikyu sangyo gijutsu ni kakawaru sendo kenkyu asanka chisso no haishutsu teigen ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Nitrogen monoxide is a strong greenhouse effect gas having warming up index per molecule 300 times greater than that of CO2, and is designated as the object of reduction in the Kyoto Conference. The present preceding research discusses necessity of performing research and development works related to reducing the emission of nitrogen monoxide, and if it is necessary, places the final objective on proposition of what researches should be planned. Fiscal 1997 being the first fiscal year of the preceding research has surveyed emission amount from different emission sources, and enumerated the research and development assignments. Fiscal 1998 falling under the final fiscal year summarizes the emission amount including the future trends, surveys the feasibility of the promising technological measures through experiments, and proposed finally a research and development plan desired of implementation in the future. The proposal contains a research plan placing development of nitrogen monoxide decomposing catalysts and automobile catalysts as the main objectives. Among the domestic nitrogen monoxide generating sources, about 2/3 is the man-made generation sources, hence catalysts, if developed, may be applied to such facilities as combustion furnaces. (NEDO)

  15. Industrial science and technology research and development institutions in fiscal 2000. Research and development of human media (Report on achievements in research and development of high-level information system for petroleum plant); 2000 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido. Human media no kenkyu kaihatsu seika hokokusho (sekiyu plant kodo johoka system gijutsu kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Having selected a petroleum refining plant as a large and complex system, a system was developed, that is capable of operating safely and efficiently a plant even by young operators by utilizing the human media technology that realizes information environment having a sense of unity with humans. With this system, if an anomaly is detected in the plant condition, the agent and the operator talk with each other freely, and necessary items of information are displayed on a large screen from moment to moment according to the priority thereof. Activities were taken in the following nine areas: 1) the total system, 2) research on an interface agent, 3) research on hypothetic plant indication interface, 4) research on a discrete cooperative treatment technology, 5) research on plant models and interface systems, 6) research on plant ontology, 7) research on significance indication interface, 8) improvement of tools to structure a large-screen integrated indication system, and 9) investigations on technological trends in foreign countries. (NEDO)

  16. Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

  17. Fiscal 1997 report under consignment from NEDO on the R and D of femto-second technology (development of ultra short pulse optoelectronics technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku femto gyo technology no kenkyu kaihatsu (chotan pulse ko electronics gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Very high speed electronics technology is indispensable for the creation of industrial base technology which supports high grade informatizing in the 21st century. The state of light and electronics is controlled in the femto-second time domain. As to the development of femto-second light pulse generation/transmission technology, mode synchronous semiconductor laser was manufactured using the strain quantum well structure aiming at heightening profit, and the repeated frequency, 166GHz, was achieved. Relating to the pulse compression element, exciton photonic band was newly designed. A technology of coding was also studied. As to the development of technology of femto-second light pulse control/distribution, shortening of the wavelength down to 1.5{mu}m and a possibility of femto-second domain high speed response were indicated by the combined double quantum well structure. The quantitative measurement of spin relaxation characteristics was successfully made. By the Mach-Zehnder light switch, obtained was the world`s fastest light switching characteristic. To realize the femto-second class very high speed element, conditions were grasped on the crystal growth of Sb based ultra thin films operating in the 1.5{mu}m zone by studying the quantum well using transition among sub-bands. 242 refs., 280 figs., 12 tabs.

  18. Fiscal 1997 report on the results of the R and D of industrial scientific technology. R and D of synergistic ceramics (R and D of corrosion prevention technology for the petroleum production system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seika hokokusho. Synergy ceramics no kenkyu kaihatsu (sekiyu seisan system fushoku boshi gijutsu kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To heighten durability and safety of materials/parts for undersea oil drilling, the development of ceramic base materials was made by developing function harmony type process technology which harmonizes on a high grade contrary characteristics and various functions. The paper summed up the fiscal 1997 results. In the design of system formation, computational simulation technology was developed to the composite process and the diploid system. The development of multifunction simultaneous manifestation materials was trially made by the higher nano structure process. A study was made of control of microstructures of porous materials and matrix filling by the gas phase precipitation control. Proposed were selective control of grain growth from species crystals and the columnar particle orientation laminated structure of simultaneous manifestation of strength and toughness. By composite precipitation reaction control, studied were simultaneous dispersion of whisker and increase in density of matrixes, and harmonization with long fibers. Silicon nitride was trially made with low lubrication/friction coefficients and high strength. A simulation method for crack progress behavior evaluation was developed using a testing notched specimen heterogeneous microstructures. Analyses were made of brittle fracture mechanics and reliability evaluation. 273 refs., 344 figs., 29 tabs.

  19. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Projects for international research exchanges and international seminars; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo chosa hokokusho. Kokusai kenkyu koryu jigyo / kokusai seminar kaisai jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the international research exchange projects promoted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. The international research exchanges are important for creation of new research areas and technological systems for solving the global environmental problems. In order to promote these activities, RITE invites and dispatches researchers to international conferences and symposiums, promotes research exchanges with major foreign research institutes and academic organizations, and invites and dispatches researchers for medium to long periods. These projects promote exchanges of the latest researches with various institutes, both domestic and foreign, and confirm that the research and development projects now RITE is promoting are closely related to those promoted by various organizations. In the FY 2000, RITE invites 5 foreign researchers for joint researches, and invites 3 foreign researchers to international conferences. RITE also dispatches 3 Japanese researchers to American and European universities, and 12 Japanese researchers to international conferences and the like, to effectively promote the domestic researches and grasp development tendencies at institutes of various countries. RITE holds 5 international seminars for exchanging and discussing broad topics over advanced researches related to global environmental technologies by researchers, both domestic and foreign. (NEDO)

  20. Basic research on energy conservation in developing countries. Joint research on oil conservation (research report on the industrial basis of Socialist Republic of Vietnam); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo sekiyu shohi koritsuka kyoryoku chosa. Betonamu shakai shugi kyowakoku sangyo kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The field research of oil conservation was conducted in developing countries, in particular, Vietnam where a steep increase in oil consumption is anticipated in the future. Energy conservation is the most effective direct measures to control combustion of fossil fuels, and an important issue to be promoted by all countries in the world to prevent global warming and reserve energy resources. In fiscal 1994, main industries in the northern part of Vietnam were researched. In fiscal 1995, the report meeting of plant survey results in the northern part and the technical seminar of energy-saving in industrial field were held, and plants around Ho Chi Minh City in the southern part of Vietnam were researched. Although Vietnam has recently acquired membership in ASEAN and is undergoing dramatic economic growth, has many problems in environmental measures. Japan has top-ranking results on energy-saving in industrial field, and the transfer of such superior technologies and techniques will greatly contribute to resource and global warming problems as well as pollution control measures in Vietnam. 13 refs., 25 figs., 26 tabs.

  1. FY 1999 report on the results of the introductory study on the global environmental industry technology. Investigational study on the environmental creation technology by the application of ecosystem information functions; 1999 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Seitaikei joho kino oyo ni yoru kankyo sozo gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To know the state of environmental pollution before it clearly exists, an investigational study was made on the technology to measure environmental stress at high sensitivity, in wide range and at high speed using functions to respond chemical substances, etc. which living organisms have. The FY 1999 results were outlined. As to the application of ecosystem information functions, survey was conduced paying attention to the environmental stress response of each of the bacteria, algae, plants and animals, responses viewed from the manifestation of immunity antibodies which occurs inside living organisms and changes at genetic level, and responses of algae and plants in case of specifying environmental pollutants. In relation to the application of the biological amplification mechanism, survey was carried out on environmental stress signals sent from plants, selection of environmental stress index plants, detection of environmental pollutants using bacteria, high sensitivity detection using animal (nematode), etc. Concerning the standardization of the environmental measuring technology by the application of ecosystem information functions, survey was conducted on artificial molecular recognition sensor, antibody device sensor, biochips, system construction, etc. (NEDO)

  2. Industrial science and technology research and development business for fiscal 1998. Research and development achievement report on glycoconjugate production and utilization technologies (Development of technologies of glycoconjugate-aided CO{sub 2} fixation and utilization); 1998 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu seika hokokusho (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Enzymatic and chemical methods were combined and methods were developed for synthesizing mucin type sugar chains and glycopeptides. The influence of sugar chain positions and structures on glycoconjugate stereo structures and physiological activities was analyzed, and glycopeptide structural activities and glycoconjugate remodelling were studied. To create an industrial advantage in a glycoprotein production system by use of zooblasts, sugar chain structure control through sugar transfase occurrence control was studied. For the production of man-adaptive sugar chains using yeast, new yeast variations were subjected to molecular breeding, and tested for the resultant improvement on productivity. Sugar chain marking and refining techniques and various responding mechanisms on the solid surface were elucidated, which enabled structure analyses using sugar chain recognition molecules such as lectins and antibodies. A database on interactions between sugar chains and sugar chain recognition molecules was constructed using the said findings. An analyzing program was also formulated tentatively. This paper also covers general surveys and studies on technologies of producing and utilizing glycoconjugates. (NEDO)

  3. Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

  4. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  5. Research and development of basic technologies for the next generation industries, 'light-reactive materials'. Evaluation on the first term research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'hikari hanno zairyo'. Daiikki kenkyu kaihatsu hyoka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    Research, development and evaluation were performed with an objective of establishing the basic technology related to light-reactive materials that control the structures and status of aggregation of molecules by using actions of light, and can be used for ultra-high density recording, high resolution indication and light switches. In elucidating the mechanism of light deterioration reaction of photochromic molecules, it was disclosed that 6-nitrospirobenzopyran has the light deterioration caused from the excitation triplet state. This disclosure presents a possibility of preventing the light deterioration. New derivatives that show photochromism were synthesized, and thin films were produced by using the LB process. This indicates a possibility of producing the photochromic materials as the high multiplex recording material. With regard to PHB materials, an evaluation technology having spectrum resolution of the world's highest level was established and measurements were performed. Hole formation was verified for the first time in the world at the temperature higher than the liquid nitrogen temperature by using a PHB material of ionic porphin/polyvinyl alcohol systems. This verification indicates a feasibility of practically usable PHB materials. (NEDO)

  6. FY 1999 project on the development of new industry support type international standards. Standardization of a production process system (development of STEP standards); 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Seisan process system no hyojunka (STEP kiban kikaku no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The R and D were carried out of the standards of assembly models in design-production process and machining process data models for production preparation, and the FY 1999 results were summarized. Integrated AAM is a reference model to make relations with AP clear, and therefore, study was made with much higher accuracy. As to resource models to express product models which make change in design possible, studied were measures for changes in shape/dimension of parts, measures for changes related to connection in assembly, etc. As to resource models required to express the process of changes from design models to production models, arrangement was made of characteristics of the shape of design models and characteristics of production process models, and study was made of models to express the seamless work from design to processing. Study was also made of the method of conversion among design models and production preparation models. The results obtained were reported as N830 and N448 of ISOTC184/SC4/WG3. (NEDO)

  7. FY 1999 project on the development of new industry support type international standards. Standardization of a method to evaluate the performance of open robot use communication interface in production system, etc.; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Seisan system nado ni okeru open robot yo tsushin interface no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of standardizing the communication interface system between personal computers and robots, the R and D were conducted on ORiN (Open Robot Interface for the Network), and the FY 1999 results were summed up. ORiN is composed of the provider part, kernel part and application logic part. The provider absorbs differences in expression and protocols of robot controller data of each company and conveys them to the kernel part. The kernel part is composed of RAO and RDF. RAO adopts the disperse object model DCOM technology and supplies the network transparency and common access method to robot. RDF supplies files with expansion of robot structure models using XML. By this, ORiN was made adoptable for future, permitting differences in each robot. In the International Robot Exhibition held in October 26-29, 1999, the prototype of ORiN was jointly demonstrated by each company. (NEDO)

  8. How extending motor vehicle`s replacement cycle affects Japanese economy ? Impact assessment using macroeconometric and input-output simulations; Jidosha kaikae cycle no chokika ga kokunai keizai ni ataeru eikyo ni tsuite. Makuro keizai sangyo renkan model ni yoru hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, M.

    1999-01-01

    The motor vehicle industry, which has inspired domestic production activities since the 1960`s, is coming up against inevitable changes. One of the typical phenomena is that the domestic motor vehicle market is getting ripe. Since almost 80 percent of households in our country already have at least one motor vehicle and the population is going to reduce, it isn`t expected that the newly car demand will increase rapidly as it did before the end of 1980`s. It is strongly predicted that purchase of cars motivated mainly for replacement is going to take a leading part of domestic sales. In this paper, we calculate the impacts of extending motor vehicle`s replacement cycles, as one aspect of maturation of the domestic motor vehicle market, on Japanese economy. Reduction of new car demands affects production not only in the motor vehicle industry, but also in the various industries. It is because motor vehicles are manufactured goods those need many step of production by the time of selling. Using CRIEPI`s macroeconometric and input-output models, we clarified that retrenchment of car replacement would decrease 2.6 trillion yen of total industry output in 1990 constant price value added terms. The loss of output in the motor vehicle industry would be 381 billion yen, and in the retail and wholesale sector it would amount td 666 billion yen. Also, electric power industry would lose 47 billion yen`s takings. Considering low economic growth since 1990, this impact could have a great influence on our prospective growing process. (author)

  9. How extending motor vehicle's replacement cycle affects Japanese economy Impact assessment using macroeconometric and input-output simulations. Jidosha kaikae cycle no chokika ga kokunai keizai ni ataeru eikyo ni tsuite. Makuro keizai sangyo renkan model ni yoru hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, M.

    1999-01-01

    The motor vehicle industry, which has inspired domestic production activities since the 1960's, is coming up against inevitable changes. One of the typical phenomena is that the domestic motor vehicle market is getting ripe. Since almost 80 percent of households in our country already have at least one motor vehicle and the population is going to reduce, it isn't expected that the newly car demand will increase rapidly as it did before the end of 1980's. It is strongly predicted that purchase of cars motivated mainly for replacement is going to take a leading part of domestic sales. In this paper, we calculate the impacts of extending motor vehicle's replacement cycles, as one aspect of maturation of the domestic motor vehicle market, on Japanese economy. Reduction of new car demands affects production not only in the motor vehicle industry, but also in the various industries. It is because motor vehicles are manufactured goods those need many step of production by the time of selling. Using CRIEPI's macroeconometric and input-output models, we clarified that retrenchment of car replacement would decrease 2.6 trillion yen of total industry output in 1990 constant price value added terms. The loss of output in the motor vehicle industry would be 381 billion yen, and in the retail and wholesale sector it would amount td 666 billion yen. Also, electric power industry would lose 47 billion yen's takings. Considering low economic growth since 1990, this impact could have a great influence on our prospective growing process. (author)

  10. Report on the results of the fiscal 1997 international research cooperation project. `Joint R and D industrial base technology` (development of functionally graded materials); 1997 nendo kokusai kyoryoku jigyo. `Sangyo kiban gijutsu kyodo kenkyu kaihatsu` keisha kinosei zairyo no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing functionally graded materials (FGM/LB) of thermal stress relaxation heat resistant large bulk state which are adoptable to high efficiency engine members, conducted in fiscal 1997 as intermediate target were the experiment for enlargement of the sintering process of FGM/LB with bore of up to 100mm, evaluation of physical properties, the basic development of the fabricating system facility for the commercialization. In the development of heat resistance use FGM/LB fabrication technology, to obtain ZrO2(3Y) stainless steel system FGM/LB, the following were fabricated in each bore size of 50-100mm by the research use large discharge plasma sintering machine: sintered bodies of ceramics/metal single substrate materials and mixed layer single substance materials, and FGM/LB sintered bodies without separation and crack which are composed of 9 intermediate graded layers. The survey was also made on the optimal composition and optimal sintering conditions toward the enlargement without unevenness. In the evaluation of physical properties, ZrO2(3Y)/stainless steel system was selected and test pieces were fabricated to obtain basic data on texture observation, distribution of hardness, fracture toughness, high temperature abrasion resistance, thermal expansion rates, etc. 27 refs., 108 figs., 43 tabs.

  11. Fiscal 1999 technical research report. Research and development project on prompt-effect international standards creation (Standardization of gene amplification and analysis methods for genetic screening); 1999 nendo shinki sangyo ikusei sokkogata kokusai hyojunka kaihatsu jigyo seika hokokusho. Idenshi kensayo idenshi zofuku kaiseki hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the promotion of Japan's proposition for international standardization, PCR (polymerase chain reaction) Comprehensive Research Committee, Technical Promotion Committee, and Japan Bioindustry Association organized a 5-member overseas research team and dispatched the team to Europe and America where they held research interviews at government organizations and business corporations engaged in standardization promotion. The aims were to disclose trends of PCR method standardization and standardization in general in biotechnology. The team visited British Standards Institution, Association Francaise de Normalisation, German Institute for Standardization, Food and Drug Administration of America, American Society for Testing and Materials, PE Biosystem, Bio-Rad Laboratories, and Roche Molecular Systems. The objects of standardization at issue included techniques, tools, devices, and reagents to be used. It is found that in Europe and America there are standardization plans under deliberation for PCR-aided techniques, not for PCR itself, and that some are now approaching completion as national or local standards. It is also learned that in every standardizing organization there is a person responsible for each TC (technical committee) of CEN (Committee European pour Normalisation). (NEDO)

  12. International seminar in fiscal 1998 on the development and promotion of global environment-related industrial technologies. Report on International Workshops on CO{sub 2} Cycling and Metabolism in Coral Reef; 1998 nendo chikyu sangyo gijutsu kaihatsu suishin jigyo. 'Sangosho ni okeru busshitsu ido to tanso junkan' kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the study of CO{sub 2} absorption and fixation in the marine ecosystem, studies of coral reefs by RITE (Research Institute of Innovative Technology for the Earth) were subjected to discussion at the above-named workshops. It is after the elapse of a long geological time on the earth that CO2 in the atmosphere has arrived at the current level of concentration thanks to fixation and calcification by living organisms and to dissolution into the seawater. In the formation of CaCO{sub 3} that constitutes the coral skeleton, 1 mol Ca combines with 2 mol bicarbonates for the production of 1 mol CaCO{sub 3} and 1 mol CO{sub 2}. The reaction may suggests a consequential increase of CO2 in the atmosphere but such CO{sub 2} is in reality consumed by being converted into organic substances in a photosynthetic process performed by symbiotic algae. Calculation was made for the whole of Bora Bay, Miyakojima Island, and the result was that 700kg-C/day comes to be stored in the form of organic matters in the community of coral reef organisms. In a coral reef, even when it emits CO2 into the atmosphere, there is organic matter production which exceeds the lost CO{sub 2}. Coral reefs fix carbon out of the seawater at the rate of 0.42Gt-C/year, which is the aggregate of 0.3Gt organic matters and 0.12Gt CaCO{sub 3}. (NEDO)

  13. Research and development of basic technologies for next generation industries, 'high-efficiency polymeric separation membrane material'. Evaluation on first term final research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu. Kokoritsu kobunshi bunrimaku zairyo (daiikki kenkyu kaihatsu hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-30

    The first term has performed research and development placing emphasis on that 'the basic study on membrane separation is to be performed systematically to elucidate governing factors in membrane separation'. With respect to water/ethanol separation by using the penetration gasifying method, it was indicated that excellent separation performance can be exhibited by using natural polymers having sugar chain skeleton as a raw material, and by controlling the membrane structure by means of membrane manufacturing methods. For enhancement of performance in water selective permeation type separation membrane, it was shown experimentally that it is important to select a membrane suitable for the object of separation and a separation method that uses the selected membrane. Regarding the water/ethanol separation, it was shown theoretically that the penetration gasifying method can save more energy than the conventional distillation method, where the development target was presented. It was recognized that impregnation type liquid membrane using crown ether can separate amino acid optical isomers. High separation performance was obtained in carbon monoxide/nitrogen separation by using fluid carrier that uses cuprous iodine/1-methyl imidazole. (NEDO)

  14. FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Ocean survey and development of evaluation technology for CO2 sequestration ability); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (Kaiyo chosa oyobi CO2 kakuri noryoku hyoka gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Assuming the melting and sequestration of CO2 at the intermediate depth of the sea area around Japan, study of evaluation technology of CO2 sequestration ability in ocean was studied, and the FY 1999 results were summed up. In the ocean survey, survey was conducted by ship (No.2 Hakurei-maru) mainly at typical observation points and traverse lines of long. 147 E and long. 155 E. In the survey, the following data were acquired: data on seawater density and chemical tracer, data on release of intermediate-depth/independent buoys, concentration distribution of carbonic acid base substances/nutrient salts/chlorophyll, data on the existing amount of marine organisms and primary production speed measurement experiment, data on experiment on CO2 on-board exposure to organisms in the intermediate depth of ocean, etc. In the measurement/analysis of the sediment particle flux amount, sediment traps were installed/recovered. Further, for the purpose of measuring the neutralizing effect of calcium carbonate, operation test on CaCO{sub 3} melting experimental equipment was conducted in the actual sea area. In the development of a model for evaluation of CO2 sequestration ability, carried out were the improvement of the model using the inverse method, study of the estimated accuracy using the ocean observation data, etc. (NEDO)

  15. FY 1999 report on the results of the project on the industrial science technology R and D. Development of utilization technology of biological resources such as bioconsortium system (Development of the petroleum substituting fuel production technology using living organisms); 1999 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugou seibutsukei tou seibutsu shigen riyo gijutsu kaihatsu (Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of developing the technology for producing and degrading useful substances using bioconsortia, study was made of the handling technology of bioconsortia, the basic element technology, etc., and the FY 1999 results were reported. In the study of the high-grade utilization technology of lignocellulose/the components, an sample was obtained in which the effect of the bacteria culture supernatant treatment was recognized in the biobleaching by co-treatment of the bacteria culture filtrate - MnP. As to the search for control factor of lignin degrading enzyme and the utilization technology, it was found out that bisphenol A was efficiently degraded by a combination of laccase and mediator production bacteria. Concerning the utilization technology of plant symbiotic bacteria, classification/identification have been finished of approximately 60% of the stored bacteria. In the study of the production technology of the petroleum substituting useful resource, a system was constructed in which immature embryos were used for callus induction and regeneration of plantlets, and plants were regenerated at high frequency via the formation of adventitious embryos. By this, the culture cell with high propagation ability was obtained. (NEDO)

  16. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  17. Industrial science and technology research and development project of university cooperative type in fiscal 2000. Report on achievements in semiconductor device manufacturing processes using Cat-CVD method (Semiconductor device manufacturing processes using Cat-CVD method); 2000 nendo daigaku renkeigata sangyo kagaku gijutsu kenkyu kaihatsu project. Cat-CVD ho ni yoru handotai device seizo process seika hokokusho (Cat-CVD ho ni yoru handotai device seizo process)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The catalytic chemical vapor deposition (Cat-CVD) method is a low-temperature thin film depositing technology that can achieve improvement in quality of semiconductor thin films and can perform inexpensive film deposition in a large area. The present project is composed of the basic research and development theme and the demonstrative research and development theme for the Cat-CVD method. This report summarizes the achievements in fiscal 2000 centering on the former theme. Discussions were given on the following five areas: 1) simulation on film thickness distribution in the Cat-CVD method, 2) life extension by preventing the catalyst converting into silicide and development of a catalyst integrated shear head, 3) vapor diagnosis in the film forming process by the Cat-CVD method using silane, hydrogen and ammonia, 4) a technology for high-speed deposition of hydrogenated amorphous silicon films for solar cells using the Cat-CVD method, and the low-temperature silicon oxide nitriding technology using heated catalysts, and 5) discussions on compatibility of transparent oxide electrode materials to the process of manufacturing thin-film silicon-based solar cells by using the Cat-CVD method. (NEDO)

  18. Prizes awarded in fiscal 1999 by the Minister for International Trade and Industry on factories having applied excellent energy management. Energy conservation by installing fuel cell power generation facilities utilizing methane gas generated from waste water treatment plants / Improvements toward a clean room and energy saving air conditioning system; 1999 nendo energy kanri yuryo kojo tsusho sangyo daijin hyosho jusho. 1999 nendo shigen energy sho chokan hyosho jusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    In order to achieve energy conservation in a waste water treatment plant in a brewery factories, an anaerobic treatment facility was introduced, and a fuel cell power generation facility effectively utilizing methane gas generated from the anaerobic waste water treatment plant was installed. This has resulted in large reduction in the operating number of blowers in the waste water treatment facility of activated sludge system. In addition, electric power, steam, and hot water generated from the fuel cells are effectively utilized as the factory utility. In energy conservation in an optical communication device manufacturing factory, the fan filter unit system was adopted, having been changed from the circulation air conditioner, a conventional type air conditioning system. The present system is a circulation system integrating the fan with the filter, making it possible to circulate air in the room to perform control of temperature, humidity, and dust in a clean room. Thus, the system has eliminated the circulating air conditioner, and reduced the air conditioner capacity by 42% and power consumption by 58.6% compared with those in the conventional circulation system. (NEDO)

  19. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the synthesis and processing of advanced biomaterials (fixation and effective utilization of carbon dioxide using peptides); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu (peptide oyo nisanka tanso koteika yuko riyo gijutsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In fiscal 1997, study was made on formation of peptides with a biogenic function and molecular recognition function, and peptide materials. The existing automatic design technique of peptides including non-natural amino acids was applied to design of complementary peptides of proteins with known structures to optimize a development technique of ligand. Practical function of peptides as advanced receptor ligand was verified by applying the existing conformation control technique to stable holding of peptide active conformation. Creation of bio-materials, and development of preparation technology of bio-substrates and materializing technology of functional molecular materials were carried out. To construct an electron transfer system by self- organized body of peptides formed on a substrate, a peptide molecular device was prepared and verified using linkers. To use peptides as photoelectron functional molecule, metallized peptide with main helix structure was prepared. The possibility of molecular materials with a fixation function of CO2 was examined. A high-sensitivity bio-sensor was also mentioned. 75 refs., 130 figs., 25 tabs.

  20. Fiscal 1996 project on the modeling for effective energy consumption in developing countries under a consignment from NEDO. Recent on the results of the demonstrative study on scrap preheater of electric furnace in the iron making process (for public); 1996 nendo hatten tojokoku energy shohi koritsuka model jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Seitetsu katei ni okeru denkiro no genryo yonetsu sochi ni kakawaru jissho kenkyu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Indonesia is the biggest iron steel producing country in the ASEAN countries. Most of the production is produced by the electric furnace method in which iron steel scrap is used as a material. However, an energy saving measure in this method, the electric furnace scrap preheater using flue gas, has not yet been spread on a full scale. This R and D is aimed at developing jointly with Indonesia an electric furnace scrap preheater for medium/small size electric furnaces which are adoptable to the present iron making situation in Indonesia and installing it to the electric furnace of the iron making plant in Indonesia for a demonstrative study on energy saving, etc. Spread/expansion of the electric furnace scrap preheater which is an excellent energy saving system targeted expansion of energy saving technology not only of Indonesia, but of ASEAN countries and Japan. In this fiscal year, remodeling of part of the system was made by change of flue gas flow for increasing the energy saving effect, and at the same time, a research study was made of a scrap reheater effective as a total system. Moreover, the paper investigated technical data/information in Japan and overseas. 3 figs., 9 tabs.

  1. FY 2000 report on the results of the project on the R and D of the global environmental industry technology. R and D of the technology for predicting environmental effects associated with the CO2 ocean sequestration (Development of the technology for predicting environmental effects in the area around the CO2 discharge point and survey for supporting study); 2000 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    To obtain the technical outlook for CO2 ocean sequestration by CO2 discharge into the intermediate layer, the R and D was conducted of the technology for predicting environmental effects in the area around the CO2 discharge point, and the FY 2000 results were summed up. In the elucidation study of the behavior at the time of discharging liquid CO2, the melting process of CO2 droplets discharged/dispersed into the seawater of the intermediate layer was observed, and the specific phenomenon of hydrate formation in the process of CO2 droplet formation was grasped. As to the technology for sending CO2 into the ocean and diluting it, experimental study was made of CO2 transportation technology from on the sea to the intermediate layer, technology for rapid dilution immediately after discharge, etc. About the indoor experiment on the CO2 influence on marine organisms, experiment on the CO2 influence was carried out using shells, sea urchin, red sea bream, etc. In the developmental study of models for predicting environmental effects in the area around the CO2 discharge point, the 3D two-phase flow LES model was developed as a model for predicting the CO2 behavior, and the simulation of the liquid CO2 discharge was made at the planned experimental site. The model for evaluation of the biological influence was also made which can consider the interaction between two kinds of organisms. (NEDO)

  2. FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Development of prediction technology of environmental effects around the point of CO2 discharge and the research support survey); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of studying viability of CO2 ocean sequestration by discharging it at the intermediate depth of ocean, the R and D were conducted of 'prediction technology of environmental effects around the point of CO2 discharge,' and the FY 1999 results were summarized. In the study of elucidation of behavior of liquid CO2 at the time of discharge, melting speed of CO2 in water and seawater, 2D CO2 concentration distribution, etc. were measured using the circulation type deep-sea simulation experimental equipment. In the study of technology to send CO2 into the sea and dilute it, the process test using mock liquid was conducted. In the indoor experiment on CO2 effects on marine organisms, conducted were the detailed experiment on long-term effects of low concentration CO2 on sea urchins and shellfish, experiment on CO2 acute effects on eggs/fry and experiment on CO2 effects on adult fish. In the developmental study of the model to predict environmental effects around the point of CO2 discharge, carried out were the improvement of the model for prediction of effects on marine organisms, study of the CO2 diffusion in topographic features supposed to be Hawaii, etc. In the international joint study, measurement/observation technology, facilities, etc. were studied in preparation for the experiment actually conducted in the sea. (NEDO)

  3. Ultra-Fine Friction Grinding of Sunflower Kernels – Thereof Tahini and Halva Production and Rheological Characterization

    Directory of Open Access Journals (Sweden)

    Emil RACOLŢA

    2016-11-01

    Full Text Available Tahini is a paste obtained by milling the roasted sunflower kernel. Usually, a time and energy consuming two-steps process is involved, a three-roll refiner and a beating machine. The aim of this work was to identify and test a milling process for roasted sunflower kernels with lower time and energy consumption. Different particle size sunflower tahini and halva samples were produced by Ultra-Fine Friction Grinding machine Masuko Sangyo “Supermasscolloider” MKCA6-2 and compared to standard technology. The rheological properties of tahini and textural parameters of halva were assessed. Rheological analysis revealed that all tahini samples produced by “Supermasscolloider” showed a different viscosity profile, as compared to control, the sample milled with the gap set at 100µm being the most viscous and the one at 200µm being the most fluid. When testing the halva samples texture, the sample obtained from the tahini milled at 200µm was clearly highlighted as having the lowest hardness values, while the other samples showed similar texture profiles. The feasibility of using an Ultra-Fine Friction Grinding machine for obtaining sunflower tahini and thereof halva with improved textural properties, was assessed successfully.

  4. Effect of freeze dried powdered probiotics on gingival status and plaque inhibition: A randomized, double-blind, parallel study

    Directory of Open Access Journals (Sweden)

    Asif Yousuf

    2017-01-01

    Full Text Available Objective: The study aimed to evaluate the effectiveness of freeze dried powdered probiotics on gingival status and plaque inhibition among 12–15-year-old schoolchildren. Materials and Methods: This randomized controlled trial was conducted among 12–15-year-old schoolchildren in Jaipur. Commercially available freeze dried probiotics containing Lactobacillus acidophilus, Bifidobacterium longum, Bifidobacterium bifidum and Bifidobacterium lactis (Prowel, Alkem Laboratories, lactic acid bacillus only (Sporolac, Sangyo, and a placebo powder calcium carbonate 250 g (Calcium Sandoz, Novartis were assigned to two intervention groups and a placebo group each comprising 11 schoolchildren. All subjects were instructed to mix the powder in 30 ml of water and swish once daily for 3 min, for 3 weeks. Periodontal clinical parameters were assessed by examining the subjects for Turesky-Gilmore-Glickman plaque index (PI (Modification of Quigley-Hein PI and gingival index at baseline, 7th day, 14th day, and 21st day. Results: For both the probiotic groups, a statistically significant reduction (P < 0.05 in gingival status and plaque inhibition was recorded up to 2nd week of probiotic ingestion. However, no significant difference was observed in the placebo group. Conclusion: The use of probiotic mouth rinses improves the oral health in children by significantly reducing the plaque and gingival scores. Further studies are warranted to prove or refute the long-term effects, means of administering probiotics and the dosages needed to achieve different preventive or therapeutic purposes.

  5. Substitution of Formal and Informal Home Care Service Use and Nursing Home Service Use: Health Outcomes, Decision-Making Preferences, and Implications for a Public Health Policy.

    Science.gov (United States)

    Chen, Chia-Ching; Yamada, Tetsuji; Nakashima, Taeko; Chiu, I-Ming

    2017-01-01

    The purposes of this study are: (1) to empirically identify decision-making preferences of long-term health-care use, especially informal and formal home care (FHC) service use; (2) to evaluate outcomes vs. costs based on substitutability of informal and FHC service use; and (3) to investigate health outcome disparity based on substitutability. The methods of ordinary least squares, a logit model, and a bivariate probit model are used by controlling for socioeconomic, demographic, and physical/mental health factors to investigate outcomes and costs based substitutability of informal and formal health-care use. The data come from the 2013 Japanese Study of Aging and Retirement (JSTAR), which is designed by Keizai-Sangyo Kenkyu-jo, Hitotsubashi University, and the University of Tokyo. The JSTAR is a globally comparable data survey of the elderly. There exists a complement relationship between the informal home care (IHC) and community-based FHC services, and the elasticity's ranges from 0.18 to 0.22. These are reasonable results, which show that unobservable factors are positively related to IHC and community-based FHC, but negatively related to nursing home (NH) services based on our bivariate probit model. Regarding health-care outcome efficiency issue, the IHC is the best one among three types of elderly care: IHC, community-based FHC, and NH services. Health improvement/outcome of elderly with the IHC is heavier concentrated on IHC services than the elderly care services by community-based FHC and NH care services. Policy makers need to address a diversity of health outcomes and efficiency of services based on providing services to elderly through resource allocation to the different types of long-term care. A provision of partial or full compensation for elderly care at home is recommendable and a viable option to improve their quality of lives.

  6. Substitution of Formal and Informal Home Care Service Use and Nursing Home Service Use: Health Outcomes, Decision-Making Preferences, and Implications for a Public Health Policy

    Directory of Open Access Journals (Sweden)

    Chia-Ching Chen

    2017-11-01

    Full Text Available ObjectivesThe purposes of this study are: (1 to empirically identify decision-making preferences of long-term health-care use, especially informal and formal home care (FHC service use; (2 to evaluate outcomes vs. costs based on substitutability of informal and FHC service use; and (3 to investigate health outcome disparity based on substitutability.Methodology and dataThe methods of ordinary least squares, a logit model, and a bivariate probit model are used by controlling for socioeconomic, demographic, and physical/mental health factors to investigate outcomes and costs based substitutability of informal and formal health-care use. The data come from the 2013 Japanese Study of Aging and Retirement (JSTAR, which is designed by Keizai-Sangyo Kenkyu-jo, Hitotsubashi University, and the University of Tokyo. The JSTAR is a globally comparable data survey of the elderly.ResultsThere exists a complement relationship between the informal home care (IHC and community-based FHC services, and the elasticity’s ranges from 0.18 to 0.22. These are reasonable results, which show that unobservable factors are positively related to IHC and community-based FHC, but negatively related to nursing home (NH services based on our bivariate probit model. Regarding health-care outcome efficiency issue, the IHC is the best one among three types of elderly care: IHC, community-based FHC, and NH services. Health improvement/outcome of elderly with the IHC is heavier concentrated on IHC services than the elderly care services by community-based FHC and NH care services.ConclusionPolicy makers need to address a diversity of health outcomes and efficiency of services based on providing services to elderly through resource allocation to the different types of long-term care. A provision of partial or full compensation for elderly care at home is recommendable and a viable option to improve their quality of lives.

  7. List of Participants

    Science.gov (United States)

    2011-08-01

    GonzalezBUAP, FCFM Lorenzo Díaz CruzBUAP Facultad de Ciencias Físico Matemáticas Luis Rey Díaz BarrónDivisión de Ciencias e Ingenierías Luis UrenaUniversidad de Guanajuato Magda LolaDept. of Physics, University of Patras, Greece Mahmoud WahbaEgyptian Center for Theoretical Physics, MTI Marcus S CohenNew Mexico State University Mario A Acero OrtegaICN - UNAM Mario E GomezUniversidad de Huelva Mark PipeUniversity of Sheffield Mauro NapsucialeDCI-UG Mirco CannoniUniversidad de Huelva Mónica Felipa Ramírez PalaciosUniversidad de Guadalajara Murli Manohar VermaLucknow university, India Nassim BozorgniaUCLA Octavio Obregón Octavio ValenzuelaIA-UNAM Oleg KamaevUniversity of Minnesota Osamu SetoHokkai-Gakuen University Pedro F González DíazIFF, CSIC, Serrano 121, 28006 Madrid, Spain Qaisar ShafiBartol Research Inst. and Delaware U. Raul Hennings-YeomansLos Alamos National Laboratory René Ángeles MartínezDepartamento de Fisica, del DCI de la Universidad de Guanajuato Reyna XoxocotziBUAP, FCFM Rishi Kumar TiwariGovt. Model Science College, Rewa (MP) INDIA Roberto A SussmanICN-UNAM Selim Gómez ÁvilaDCI-UG Sugai KenichiSaitama University Susana Valdez AlvaradoDCI-UG TVladimir - 2K CollaborationColorado State University Tonatiuh MatosCINVESTAV Valeriy DvoeglazovUniversidad de Zacatecas Vannia Gonzalez MaciasDCI-UG Vladimir Avila-ReeseInstituto de Astronomia, UNAM Wolfgang BietenholzINC, UNAM (Mexico) Yamanaka MasatoKyoto Sangyo University Yann MambriniLPT Orsay Yu-Feng ZhouInstitute of Theotretical Physics, Chinese Academy of Sciences, PR China Aaron HigueraDCI-UG Azarael Yebra PérezDCI-UG César Hernández AguayoDCI-UG Jaime Chagoya AlvarezDCI-UG Jonathan Rashid Rosique CampuzanoDCI-UG José Alfredo Soto ÁlvarezDCI-UG Juan Carlos De Haro SantosDCI-UG Luis Eduardo Medina MedranoDCI-UG Maria Fatima Rubio EspinozaDCI-UG Paulo Alberto Rodriguez HerreraDCI-UG Roberto Oziel Gutierrez CotaDCI-UG Rocha Moran Maria PaulinaDCI-UG Xareni Sanchez MonroyDCI-UG

  8. Persistent Neck and Shoulder Pains among Computer Office Workers: A Longitudinal Study

    Directory of Open Access Journals (Sweden)

    Farideh Sadeghian

    2012-11-01

    S, Gray A. Prevalence and impact of musculoskeletal disorders in New Zealand nurses, postal workers and office workers. Aust N Z J Public Health 2009;33(5:437-41. 14. Eltayeb S, Staal JB, Hassan A, de Bie RA. Work Related Risk Factors for Neck, Shoulder and Arms Complaints: A Cohort Study Among Dutch Computer Office Workers. J Occup Rehabil 2009;19(4:315-22. 15. Lassen CF, Mikkelsen S, Kryger AI, Anders JH. Risk factors for persistent elbow, forearm and hand pain among computer workers. Scand J Work Environ Health 2005;31(2:122-31. 16. Coggon D. Occupational medicine at a turning point. Occup Environ Med 2005;62(5:281-3. 17. Kuorinka I, Jonsson B, Kilbom A, Vinterberg H, Biering-Sørensen F, Andersson G, et al. Standardised Nordic questionnaires for the analysis of musculoskeletal symptoms. Appl Ergon 1987;18(3:233-7. 18. Iwakiri K, Mori I, Sotoyama M, Horiguchi K, Ochiai T, Jonai H, et al. [Survey on visual and musculoskeletal symptoms in VDT workers]. Sangyo Eiseigaku Zasshi 2004;46(6:201-12. (Full Text in Japanese 19. Choobineh A, Nouri E, Arjmandzadeh A, Mohamadbaigi A. Musculoskeletal Disorders among Bank Computer Operators. Iran Occup Health 2006;3(3,4:12-7. 20. Tornqvist EW, Kilbom Å, Vingård E, Alfredsson L, Hagberg M, Theorell T, et al. The influence on seeking care because of neck and shoulder disorders from work-related exposures. Epidemiology 2001;12(5:537-45. 21. Andersen JH, Kaergaard A, Frost P, Thomsen JF, Bonde JP, Fallentin N, et al. Physical, psychosocial, and individual risk factors for neck shoulder pain with pressure tenderness in the muscles among workers performing monotonous, repetitive work. Spine 2002;27(6:660-7. 22. Kaergaard A, Andersen JH. Musculoskeletal disorders of theneck and shoulders in female sewing machine operators: prevalence, incidence, and prognosis. Occup Environ Med. 2000;57(8:528-34. 23. Miranda H, Viikari-Juntura E, Martikainen R, Riihimäki H. A prospective study on knee pain and its risk factors. Osteoarthritis