WorldWideScience

Sample records for sandwich construction

  1. Impulsive Loading of Cellular Media in Sandwich Construction

    Science.gov (United States)

    Main, Joseph A.; Gazonas, George A.

    2006-07-01

    Motivated by recent efforts to mitigate blast loading using energy-absorbing materials, this paper investigates the uniaxial crushing of cellular media in sandwich construction under impulsive pressure loading. The cellular core is modeled using a rigid, perfectly-plastic, locking idealization, as in previous studies, and the front and back faces are modeled as rigid, with pressure loading applied to the front face and the back face unrestrained. Predictions of this analytical model show excellent agreement with explicit finite element computations, and the model is used to investigate the influence of the mass distribution between the core and the faces. Increasing the mass fraction in the front face is found to increase the impulse required for complete crushing of the cellular core but also to produce undesirable increases in back-face accelerations. Optimal mass distributions are investigated by maximizing the impulse capacity while limiting the back-face accelerations to a specified level.

  2. Standard Test Method for Laboratory Aging of Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 This test method covers the determination of the resistance of sandwich panels to severe exposure conditions as measured by the change in selected properties of the material after exposure. The exposure cycle to which the specimen is subjected is an arbitrary test having no correlation with natural weathering conditions. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. Mineralization Induction of Gingival Fibroblasts and Construction of a Sandwich Tissue-Engineered Complex for Repairing Periodontal Defects.

    Science.gov (United States)

    Wu, Mingxuan; Wang, Jie; Zhang, Yanning; Liu, Huijuan; Dong, Fusheng

    2018-02-22

    BACKGROUND The ideal healing technique for periodontal tissue defects would involve the functional regeneration of the alveolar bone, cementum, and periodontal ligament, with new periodontal attachment formation. In this study, gingival fibroblasts were induced and a "sandwich" tissue-engineered complex (a tissue-engineered periodontal membrane between 2 tissue-engineered mineralized membranes) was constructed to repair periodontal defects. We evaluated the effects of gingival fibroblasts used as seed cells on the repair of periodontal defects and periodontal regeneration. MATERIAL AND METHODS Primitively cultured gingival fibroblasts were seeded bilaterally on Bio-Gide collagen membrane (a tissue-engineered periodontal membrane) or unilaterally on small intestinal submucosa segments, and their mineralization was induced. A tissue-engineered sandwich was constructed, comprising the tissue-engineered periodontal membrane flanked by 2 mineralized membranes. Periodontal defects in premolar regions of Beagles were repaired using the tissue-engineered sandwich or periodontal membranes. Periodontal reconstruction was compared to normal and trauma controls 10 or 20 days postoperatively. RESULTS Periodontal defects were completely repaired by the sandwich tissue-engineered complex, with intact new alveolar bone and cementum, and a new periodontal ligament, 10 days postoperatively. CONCLUSIONS The sandwich tissue-engineered complex can achieve ideal periodontal reconstruction rapidly.

  4. Carbon footprint hotspots of prefabricated sandwich panels for hostel construction in Perlis

    Science.gov (United States)

    Razali, Norashikin; Ayob, Afizah; Chandra, Muhammad Erwan Shah; Zaki, Mohd Faiz Mohammad; Ahmad, Abdul Ghapar

    2017-10-01

    Sustainable design and construction have gained increasing research interest, and reduction of carbon from building construction has become the main focus of environmental strategies in Malaysia. This study uses life cycle assessment and life cycle inventory analysis frameworks to estimate the amount of carbon footprint expressed in carbon dioxide equivalent tons (CO2e) produced by manufacturing prefabricated Industrialized Building System sandwich panels and its installation for a five-story hostel in Perlis, Malaysia. Results show that the carbon footprint hotspots were centered on boiler machine operation and cement with 4.52 and 369.04 tons CO2e, respectively. This finding is due to the extensive energy used for steam heating and high engine rating for the boiler. However, for cement, the carbon footprint hotspots are caused by the large quantity of cement applied in shotcrete mixture and its high extraction and production CO2 emission values. The overall onsite materials generated 96.36% of the total carbon footprint. These carbon footprint hotspot results constitute a necessary base for the Malaysian government in accomplishing an adequate dimensioning of carbon emissions in the building sector.

  5. Investigation of local thermal loading in sandwich constructions using laser techniques

    Science.gov (United States)

    El-Beshtawy, Ibrahim K.; Jankowski, Ludomir J.

    1997-10-01

    The investigations of sandwich plates deformation generated by local thermal load acting on the face are presented. An experimental program is conducted to measure the displacements normal to the faces, value of thermal expansion coefficient of the foamed polyurethane core and displacements at the interfaces under different temperature increment. Holographic interferometry and speckle photography were used for displacement measurement. Special optical set-up is designed for local heating of the sandwich plate face using cw argon laser. Experimental results are found to be in good agreement with numerical calculation.

  6. A nano-sandwich construct built with graphene nanosheets and carbon nanotubes enhances mechanical properties of hydroxyapatite-polyetheretherketone scaffolds.

    Science.gov (United States)

    Feng, Pei; Peng, Shuping; Wu, Ping; Gao, Chengde; Huang, Wei; Deng, Youwen; Xiao, Tao; Shuai, Cijun

    2016-01-01

    A nano-sandwich construct was built by combining two-dimensional graphene nanosheets (GNSs) and one-dimensional carbon nanotubes (CNTs) to improve the mechanical properties of hydroxyapatite-polyetheretherketone (HAP-PEEK) scaffolds for bone tissue engineering. In this nano-sandwich construct, the long tubular CNTs penetrated the interlayers of graphene and prevented their aggregation, increasing the effective contact area between the construct and matrix. The combination of GNSs and CNTs in a weight ratio of 2:8 facilitated the dispersion of each other and provided a synergetic effect in enhancing the mechanical properties. The compressive strength and modulus of the scaffolds were increased by 63.58% and 56.54% at this time compared with those of HAP-PEEK scaffolds, respectively. The carbon-based fillers, pulling out and bridging, were also clearly observed in the matrix. Moreover, the dangling of CNTs and their entangling with GNSs further reinforced the mechanical properties. Furthermore, apatite layer formed on the scaffold surface after immersing in simulated body fluid, and the cells attached and spread well on the surface of the scaffolds and displayed good viability, proliferation, and differentiation. These evidence indicate that the HAP-PEEK scaffolds enhanced by GNSs and CNTs are a promising alternative for bone tissue engineering.

  7. Effect of temperature on composite sandwich structures subjected to low velocity impact. [aircraft construction materials

    Science.gov (United States)

    Sharma, A. V.

    1980-01-01

    The effect of low velocity projectile impact on sandwich-type structural components was investigated. The materials used in the fabrication of the impact surface were graphite-, Kevlar-, and boron-fibers with appropriate epoxy matrices. The testing of the specimens was performed at moderately low- and high-temperatures as well as at room temperature to assess the impact-initiated strength degradation of the laminates. Eleven laminates with different stacking sequences, orientations, and thicknesses were tested. The low energy projectile impact is considered to simulate the damage caused by runway debris, the dropping of the hand tools during servicing, etc., on the secondary aircraft structures fabricated with the composite materials. The results show the preload and the impact energy combinations necessary to cause catastrophic failure in the laminates tested. A set of faired curves indicating the failure thresholds is shown separately for the tension-and compression-loaded laminates. The specific-strengths and -modulii for the various laminates tested are also given.

  8. Honeycomb core material for sandwich construction - with common hexagonal walls bonded by thermoplastic resin and free walls carrying layer of resin and masking agent

    NARCIS (Netherlands)

    Undetermined, U.

    1991-01-01

    Abstract of NL 8902116 (A) In a honeycomb core material for a sandwich construction, the common hexagonal walls are bonded together by a thermoplastic resin, and the free hexagonal walls carry a layer of the same resin and also a masking agent. - A number of plates of raw material are given strips

  9. Multifunctional sandwich composites

    Science.gov (United States)

    Vaidya, Uday K.

    2003-10-01

    Sandwich composites find increasing use as flexural load bearing lightweight sub-elements in air/space vehicles, rail/ground transportation, marine and sporting goods. The core in these applications is usually balsa wood, foam or honeycomb with laminated carbon or glass facesheets. A limitation of traditional sandwich onfigurations is that the space in the core becomes inaccessible once the facesheets are bonded in place. Significant multi-functional benefits can be obtained by making either the facesheets or the core, space accessible. Multi-functionality is generally referred to as value added to the structure that enhances functions beyond traditional load bearing. Such functions may include sound/vibration damping, ability to route wires or embed sensors. The present work reviews recent work done in enhancing the functionality of the core by use of the space in the core. The damage created by impact to sandwich constructions is always a limiting issue in design. In the present work, low velocity impact (LVI) response of newer/multi-functional sandwich constructions has been studied. Concepts of increasing sandwich core functionality have been reported.

  10. Composite sandwich construction with syntactic foam core - A practical assessment of post-impact damage and residual strength

    Science.gov (United States)

    Hiel, C.; Dittman, D.; Ishai, O.

    1993-01-01

    An account is given of an inspection method that has been successfully used to assess the postimpact damage and residual strength of syntactic (glass microspheres in epoxy matrix) foam-core sandwich panels with hybrid (carbon and glass fiber-reinforced) composite skins, which inherently possess high damage tolerance. SEM establishes that the crushing of the microspheres is responsible for the absorption of most of the impact energy. Damage tolerance is a function of the localization of damage by that high impact energy absorption.

  11. Buckyball sandwiches.

    Science.gov (United States)

    Mirzayev, Rasim; Mustonen, Kimmo; Monazam, Mohammad R A; Mittelberger, Andreas; Pennycook, Timothy J; Mangler, Clemens; Susi, Toma; Kotakoski, Jani; Meyer, Jannik C

    2017-06-01

    Two-dimensional (2D) materials have considerably expanded the field of materials science in the past decade. Even more recently, various 2D materials have been assembled into vertical van der Waals heterostacks, and it has been proposed to combine them with other low-dimensional structures to create new materials with hybridized properties. We demonstrate the first direct images of a suspended 0D/2D heterostructure that incorporates C 60 molecules between two graphene layers in a buckyball sandwich structure. We find clean and ordered C 60 islands with thicknesses down to one molecule, shielded by the graphene layers from the microscope vacuum and partially protected from radiation damage during scanning transmission electron microscopy imaging. The sandwich structure serves as a 2D nanoscale reaction chamber, allowing the analysis of the structure of the molecules and their dynamics at atomic resolution.

  12. Sandwich Structure Based On Corrugated-Core: A Review

    Directory of Open Access Journals (Sweden)

    Zaid N. Z. M.

    2016-01-01

    Full Text Available Sandwich structures are commonly based on polymeric foam and honeycomb core material, for use in lightweight applications such as fuselage in aero plane, hull in marine construction and others. A review of sandwich structure based on corrugated-core is proposed and presented in this paper. Firstly, this paper aims to provide a means of comparing available sandwich structure in industries. Secondly, this paper aims to provide sandwich structure with corrugated-core for future research development efforts in field of sandwich construction. This paper starts with introduction of composite material such as sandwich structure, the advantages of sandwich structure was shown. After that these papers provide the structure of sandwich structure which includes the two faces and the cores. Furthermore, sandwich structure with different cores, which is honeycomb, foam core and corrugated core are discussed. At the end, the paper discussed more on corrugated-core for future research development.

  13. SIGNS The sandwich sign

    African Journals Online (AJOL)

    214. 5. Kunimasa K, Jo T, Takaiwa T, Ishida T. Thoracic sandwich sign. Intern Med 2011;50:2865. 6. Caceres J, Mata JM, Castaner E, Villanueva A. CT recognition of traumatic herniation of stomach: the sandwich sign. J Thorac Imaging 1995 ...

  14. Design of sandwich beams for concentrated loading

    Science.gov (United States)

    Kim, Jongman

    Although sandwich construction offers well-known advantages for high stiffness with light-weight, the problem of designing a sandwich structure to withstand localized loading such as might result from accidental impact, for example, is important. The review of the literature and experimental results performed by the author has shown that current design and analysis procedures are not suitable for predictions of the response of sandwich structures for concentrated loading. To investigate the response of sandwich structures to concentrated loading, experiments were carried out on beam specimens with polyurethane foam core with various densities and thickness, and faces made of AS4/3501-6 carbon/epoxy fiber composite of various thickness under three point loading, which gives a concentrated loading. Overall deformation was measured, along with strains from both surface and embedded gages. Additionally, compression tests and torsion tests have been done for the polyurethane foam used as core in the sandwich beam to characterize its yield properties. Many theories, including classical theory, first order shear deformation theory, higher order theory, elasticity and FE analysis, were compared with the three-point bending experiments. A two-dimensional elasticity solution, which is suitable for sandwich beams under simply support boundary conditions, was used to obtain the strain/stress distribution, failure prediction and optimization work. The common failure modes of sandwich beams have been observed, including core failure in compression and shear failure in core, delamination, and fiber failure in the face. The failure modes can be predicted for sandwich beams under localized loading using elasticity theory and the failure is controlled by a failure mode with the lowest load. An algorithm developed by Swanson and Kim was used to predict the optimum design of sandwich structures for strength to weight under concentrated loading and compared with experimental yield or

  15. Predicting safe sandwich production

    DEFF Research Database (Denmark)

    Birk, Tina; Duan, Zhi; Møller, Cleide Oliveira de Almeida

    2014-01-01

    Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation and serv......Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation...... and serving. However, Danish sandwich producing companies find it challenging to comply with this and have expressed a need for more flexibility. The Danish guidelines do allow for a prolongation of the acceptable time outside the cold chain, if the safety of the specific production can be documented....... There is, therefore, room for developing targeted tools for evaluating the time-temperature scenarios in sandwich production. This study describes a decision support tool developed to offer the producers more flexibility. Based on time/temperature measurements obtained during preparation combined...

  16. "If They're the Customer, I'm the Meat in the Sandwich": An Exploration of Tertiary Teachers' Metaphorical Constructions of Teaching

    Science.gov (United States)

    Emerson, Lisa; Mansvelt, Juliana

    2014-01-01

    Metaphors are a primary influence on the way we perceive and construct our world; they are also a way of revealing beliefs and attitudes that might otherwise be difficult to identify. Furthermore, metaphor has been found to be an effective way of shifting people's beliefs, attitudes and behaviour. This paper details the findings of a pilot study…

  17. Precast/Prestressed Concrete Experiments Performance on Non-Load Bearing Sandwich Wall Panels

    Science.gov (United States)

    2011-01-01

    AFRL-RX-TY-TR-2011-0021 PRECAST/ PRESTRESSED CONCRETE EXPERIMENTS PERFORMANCE ON NON-LOAD BEARING SANDWICH WALL PANELS Clay J. Naito...2008 -- 20-NOV-2010 Precast/ Prestressed Concrete Experiments Performance on Non-Loadbearing Sandwich Wall Panels FA8903-08-D-8768-0002 99999F GOVT F0...Wall Construction [TCA 2006] .............................................. 5 3. Prestressed Concrete Sandwich Wall Construction [PCI 1997

  18. RANDOM VIBRATION ANALYSIS OF SANDWICH COMPOSITE BEAMS

    OpenAIRE

    K. Ravindranath Tagore, Rachumalla Pallavi

    2016-01-01

    In this thesis, a sandwich composite for Semi-monocoque construction in aircraft fuselage is analyzed for its strength under different loading conditions using different materials for Stringers balsa wood, syntactic foams, and honeycombs and Carbon Fiber reinforced thermoplastics is used as skin material. 3D modeling is done in Pro/Engineer. Static, Modal and Random Vibration analysis is done on the beam using finite element analysis software Ansys.

  19. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    OpenAIRE

    Boualem, Keskes

    2013-01-01

    The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durabi...

  20. Sandwich or sweets?

    DEFF Research Database (Denmark)

    Kraus, Alexandra; Piqueras-Fiszman, Betina

    2016-01-01

    with the use of indirect measurements. However, literature results on the relationship between dynamic, motivational concepts (e.g., approach or avoidance tendencies) and evaluative concepts (e.g., positive or negative associations) remain inconclusive, possibly due to the use of different experimental...... manipulations and methodologies to operationalize these. Our aim with this study is to contribute to this line of research by developing a novel methodology that is based on structurally identical indirect measurement procedures. We measured explicit desire (motivation) and liking (evaluation) of two different...... foods (sandwich and sweets) on visual analogue scales, as well as implicit approach–avoidance tendencies and implicit positive–negative associations with two variants of the recoding-free Implicit Association Tests (IAT-RFs). At first, all participants (N = 108) unwrapped, smelled, and explicitly judged...

  1. Facesheet Delamination of Composite Sandwich Materials at Cryogenic Temperatures

    Science.gov (United States)

    Gates, Thomas S.; Odegard, Gregory M.; Herring, Helen M.

    2003-01-01

    The next generation of space transportation vehicles will require advances in lightweight structural materials and related design concepts to meet the increased demands on performance. One potential source for significant structural weight reduction is the replacement of traditional metallic cryogenic fuel tanks with new designs for polymeric matrix composite tanks. These new tank designs may take the form of thin-walled sandwich constructed with lightweight core and composite facesheets. Life-time durability requirements imply the materials must safely carry pressure loads, external structural loads, resist leakage and operate over an extremely wide temperature range. Aside from catastrophic events like tank wall penetration, one of the most likely scenarios for failure of a tank wall of sandwich construction is the permeation of cryogenic fluid into the sandwich core and the subsequent delamination of the sandwich facesheet due to the build-up of excessive internal pressure. The research presented in this paper was undertaken to help understand this specific problem of core to facesheet delamination in cryogenic environments and relate this data to basic mechanical properties. The experimental results presented herein provide data on the strain energy release rate (toughness) of the interface between the facesheet and the core of a composite sandwich subjected to simulated internal pressure. A unique test apparatus and associated test methods are described and the results are presented to highlight the effects of cryogenic temperature on the measured material properties.

  2. Performance enhancement of sandwich panels with honeycomb–corrugation hybrid core

    Directory of Open Access Journals (Sweden)

    Bin Han

    2016-01-01

    Full Text Available The concept of combining metallic honeycomb with folded thin metallic sheets (corrugation to construct a novel core type for lightweight sandwich structures is proposed. The honeycomb–corrugation hybrid core is manufactured by filling the interstices of aluminum corrugations with precision-cut trapezoidal aluminum honeycomb blocks, bonded together using epoxy glue. The performance of such hybrid-cored sandwich panels subjected to out-of-plane compression, transverse shear, and three-point bending is investigated, both experimentally and numerically. The strength and energy absorption of the sandwich are dramatically enhanced, compared to those of a sandwich with either empty corrugation or honeycomb core. The enhancement is induced by the beneficial interaction effects of honeycomb blocks and folded panels on improved buckling resistance as well as altered crushing modes at large plastic deformation. The present approach provides an effective method to further improve the mechanical properties of conventional honeycomb-cored sandwich constructions with low relative densities.

  3. Analysis and Behaviour of Sandwich Panels with Profiled Metal Facings under Transverse Load

    Directory of Open Access Journals (Sweden)

    M. Budescu

    2004-01-01

    Full Text Available Sandwich panels with thin steel facings and polyurethane core combine the load-carrying capacity of metal facings and protection functions with core properties. The core separates the two facings and keeps them in a stable condition, transmits shear between external layers, provides most of the shear rigidity and occasionally makes of useful contribution to the bending stiffness of the sandwich construction as a whole [1]. An experimental program on sandwich panels has been organized to prove that the mechanical properties of core and interface satisfy the load-carrying requirements for structural sandwich panels. The analysis of sandwich panels with deep profiles facings for cladding elements, respectively the roof constructions, has been carried out according to the European design norms [1], [5].

  4. Mechanical evaluation with fe analysis of sandwich panels for wind turbine blade

    Energy Technology Data Exchange (ETDEWEB)

    Yasaswi, M.; Naveen, P.N.E.; Prasad, R.V. [GIET. Dept. of Mechanical Engineering, Rajahmundry (India)

    2012-07-01

    Sandwich panels are notable for their structural efficiency and are used as load bearing components in various branches of engineering, especially in aerospace and marine industries. The objective of the present work is to perform computer-aided analysis on sandwich panels. The analysis of sandwich panel with truss core are compared with other four types of sandwich panel with continuous corrugated core, top hat core, zed core and channel core. The basic reason to use sandwich structure is to save weight, however smooth skins and excellent fatigue resistance are also attributes of a sandwich structure. A sandwich is comprised of two layered composite materials formed by bonding two or more thin facings or face sheets to relatively thick core materials. In this type of construction the facings resist nearly all of the in-plane loads and out-of-plane bending moments. The thin facings provide nearly all of the bending stiffness because they are generally of a much higher modulus material is located at a greatest distance from the neutral axis of the component. The basic concept of sandwich panel is that the facings carry the bending loads and the core carries the shear loads. The main function of the core material is to distribute local loads and stresses over large areas. From all this analysis it is concluded that the truss core Sandwich panels can be used in wind turbine blade design. (Author)

  5. Research overview of design method of super light multi-hole class- honeycomb sandwich structure materials

    Directory of Open Access Journals (Sweden)

    Xiang LI

    Full Text Available With the sandwich structure materials' application and promotion in the field of engineering continuously, existing sandwich structure material gradually cannot meet the design requirements. It is very urgent to develop new sandwich structure materials of high efficiency, energy saving and easy to process. The project puts forward and constructs a new kind of class-honeycomb sandwich structure material combined with important application backgrounds that super light and high strength metal sandwich structure materials are applied into the high weight and high energy consumption equipments of automobile, aerospace and machinery and so on. This research involve: mechanical properties equivalent method for the class-honeycomb sandwich structure and its core; Strength, stiffness and inherent frequency characteristic and failure criterions of the class-honeycomb sandwich structure; based on the failure criterions constructing the multiple-constraint models of the class-honeycomb sandwich structure. The research tries to put forward a new method for innovative design of lightweight material and structure and new ideas of lightweight technology research in theory and practice.

  6. Structural and failure mechanics of sandwich composites

    CERN Document Server

    Carlsson, LA; Carlsson, Leif A

    2011-01-01

    Focusing on important deformation and failure modes of sandwich structures, this volume describes the mechanics behind fracture processes. The text also reviews test methods developed for the cr, structural integrity, and failure mechanisms of sandwich structures.

  7. High temperature structural sandwich panels

    Science.gov (United States)

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  8. Investigation on Wall Panel Sandwiched With Lightweight Concrete

    Science.gov (United States)

    Lakshmikandhan, K. N.; Harshavardhan, B. S.; Prabakar, J.; Saibabu, S.

    2017-08-01

    The rapid population growth and urbanization have made a massive demand for the shelter and construction materials. Masonry walls are the major component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. The present investigations are carried out to develop a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS (Expanded Polystyrene) beads of 3 mm diameter size are mixed with concrete and developed a lightweight concrete with a density 9 kN/m3. The lightweight sandwich panel is cast with a lightweight concrete inner core and ferrocement outer skins. This lightweight wall panel is tested for in-plane compression loading. A nonlinear finite element analysis with damaged plasticity model is carried out with both material and geometrical nonlinearities. The experimental and analytical results were compared. The finite element study predicted the ultimate load carrying capacity of the sandwich panel with reasonable accuracy. The present study showed that the lightweight concrete is well suitable for the lightweight sandwich wall panels.

  9. Development of biobased sandwich structures for mass transit application

    Science.gov (United States)

    Munusamy, Sethu Raaj

    Efforts to increase the biobased content in sandwich composites are being investigated to reduce the dependence on synthetically produced or mined, energy-intensive materials for numerous composite applications. Vegetable oil-based polyurethane foams are gaining recognition as good substitutes for synthetic counter parts while utilizing bast fiber to replace fiberglass is also gaining credence. In this study, soy oil-based polyurethane foam was evaluated as a core in a sandwich construction with facesheets of hybridized kenaf and E-glass fibers in a vinyl ester resin matrix to replace traditionally used plywood sheeting on steel frame for mass transit bus flooring systems. As a first step towards implementation, the static performance of the biobased foam was compared to 100% synthetic foam. Secondly, biobased sandwich structures were processed and their static performance was compared to plywood. The biobased sandwich composites designed and processed were shown to hold promise towards replacing plywood for bus flooring applications by displaying an increase of 130% for flexural strength and 135% for flexural modulus plus better indentation values.

  10. Fluid Structure Interaction Effect on Sandwich Composite Structures

    Science.gov (United States)

    2011-09-01

    far back as ancient Egyptian times in the use of straw and bricks, or more recently in the last century with the use of steel rebar in concrete ...construction of sandwich composites; however, this particular material was selected for its uniform pattern and translucent qualities after it is wetted out...excellent fire retardant and corrosion resistant qualities making it a natural selection for shipboard applications. The same translucent qualities

  11. ANALISA TEKNIS DAN EKONOMIS PENGGUNAAN COREMAT UNTUK KONSTRUKSI FRP (FIBERGLASS REINFORCED PLASTIC SANDWICH PADA BADAN KAPAL

    Directory of Open Access Journals (Sweden)

    Parlindungan Manik

    2012-04-01

    Full Text Available Planning of ship construction is make its having good effectivity value and efficiency. Composite as material alternative to changes of steel feedstock and wood has many applied named FRP (fiberglass reinforced plastics single skin. The weakness of this FRP was heavy construction and requires many production time. Therefore, will be checked comparison between single skin with sandwich constructions for shell. In this research, the way for making composite is hand lay up method with three various thickness of skin there are : t, t/2, and t/4. To know strength comparison from the various skin of sandwich with single skin, must be test, consist of tensile test.. The result is analyzed then compared by BKI (Biro Klasifikasi Indonesia rules for the fiberglass ship. Based on the result, indicates that optimization skin thickness of sandwich construction applies Coremat which tensile strength it is equivalent with Single Skin at 2/3t and usage of Sandwich construction causes 23,12 % lighter. In economic analyze, advantage from low weight is compensation of addition 23,12 % DWT. Material cost for Sandwich about 11,35% bigger than Single Skin construction.

  12. ANALISA TEKNIS DAN EKONOMIS PENGGUNAAN COREMAT UNTUK KONSTRUKSI FRP (FIBERGLASS REINFORCED PLASTIC SANDWICH PADA BADAN KAPAL

    Directory of Open Access Journals (Sweden)

    Parlindungan Manik

    2012-02-01

    Full Text Available Planning of ship construction is make its having good effectivity value and efficiency. Composite as materialalternative to changes of steel feedstock and wood has many applied named FRP (fiberglass reinforcedplastics single skin. The weakness of this FRP was heavy construction and requires many production time.Therefore, will be checked comparison between single skin with sandwich constructions for shell.In this research, the way for making composite is hand lay up method with three various thickness of skinthere are : t, t/2, and t/4. To know strength comparison from the various skin of sandwich with single skin,must be test, consist of tensile test.. The result is analyzed then compared by BKI (Biro Klasifikasi Indonesiarules for the fiberglass ship.Based on the result, indicates that optimization skin thickness of sandwich construction applies Corematwhich tensile strength it is equivalent with Single Skin at 2/3t and usage of Sandwich construction causes23,12 % lighter. In economic analyze, advantage from low weight is compensation of addition 23,12 % DWT.Material cost for Sandwich about 11,35% bigger than Single Skin construction.

  13. Flexural Behavior of Aluminum Honeycomb Core Sandwich Structure

    Science.gov (United States)

    Matta, Vidyasagar; Kumar, J. Suresh; Venkataraviteja, Duddu; Reddy, Guggulla Bharath Kumar

    2017-05-01

    This project is concerned with the fabrication and flexural testing of aluminium honey comb sandwich structure which is a special case of composite materials that is fabricated by attaching two thin but stiff skins to a light weight but thick core. The core material is normally low density material but its high thickness provide the sandwich composite with high bonding stiffness. Honeycomb core are classified into two types based on the materials and structures. Hexagonal shape has a unique properties i.e has more bonding strength and less formation time based on the cell size and sheet thickness. Sandwich structure exhibit different properties such as high load bearing capacity at low weight and has excellent thermal insulation. By considering the above properties it has tendency to minimize the structural problem. So honey comb sandwich structure is choosed. The core structure has a different applications such as aircraft, ship interiors, construction industries. As there is no proper research on strength characteristics of sandwich structure. So, we use light weight material to desire the strength. There are different parameters involved in this structure i.e cell size, sheet thickness and core height. In this project we considered 3 level of comparison among the 3 different parameters cell size of 4, 6 and 8 mm, sheet thickness of 0.3, 0.5 and 0.7 mm, and core height of 20,25 and 30 mm. In order to reduce the number of experiment we use taguchi design of experiment, and we select the L8 orthogonal array is the best array for this type of situation, which clearly identifies the parameters by independent of material weight to support this we add the minitab software, to identify the main effective plots and regression equation which involves the individual response and corresponding parameters. Aluminium material is used for the fabrication of Honeycomb sandwich structure among the various grades of aluminium we consider the AL6061 which is light weight material

  14. Construction

    Science.gov (United States)

    2002-01-01

    San Juan, PR Tren Urbano Subway Project, San Juan, PR U.S. Army South, San Juan, PR U.S. Coast Guard Housing Project, San Juan, PR U.S. Coast Guard...construction?, Foresight/CRISP Workshop on Nanotechnology, Royal Society of Arts . Cheltenham, England: 2001, p.5. 56 Concrete Proposals, Economist, July 24

  15. Applications of thin-film sandwich crystallization platforms

    Energy Technology Data Exchange (ETDEWEB)

    Axford, Danny, E-mail: danny.axford@diamond.ac.uk; Aller, Pierre; Sanchez-Weatherby, Juan; Sandy, James [Diamond Light Source, Harwell Oxford, Didcot OX11 0DE (United Kingdom)

    2016-03-24

    Crystallization via sandwiches of thin polymer films is presented and discussed. Examples are shown of protein crystallization in, and data collection from, solutions sandwiched between thin polymer films using vapour-diffusion and batch methods. The crystallization platform is optimal for both visualization and in situ data collection, with the need for traditional harvesting being eliminated. In wells constructed from the thinnest plastic and with a minimum of aqueous liquid, flash-cooling to 100 K is possible without significant ice formation and without any degradation in crystal quality. The approach is simple; it utilizes low-cost consumables but yields high-quality data with minimal sample intervention and, with the very low levels of background X-ray scatter that are observed, is optimal for microcrystals.

  16. Advanced Mechanical Testing of Sandwich Materials

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Jenstrup, Claus

    2008-01-01

    An advanced digital optical system has been used to measure surface strains on sandwich face and core specimens tested in a project concerned with improved criteria for designing sandwich X-joints. The face sheet specimens were of glass reinforced polyester and were tested in tension. The core sp...

  17. Application of self compacting concrete for steel-concrete-steel sandwich structure; Hagane concrete full sandwich kozo eno koryudo concrete no tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, M.; Kawamura, R. [Ministry of Transport, Tokyo (Japan); Yuguchi, Y.; Yamamoto, A.

    1998-04-01

    This construction refers to a construction to fabricate a submerged box constituting a submerged tunnel. Since the construction shape thereof is of a steel-concrete-steel sandwich structure (full-sandwich structure), it is indispensable to use self compacting concrete having excellent fillability and very little volumetric change after placement. Therefore, a test construction was performed before the actual construction to select correct mixing of self compacting concrete having good quality and conduct smooth construction. The test provided a very good result presenting no unfilled portions in the actual concrete construction. This paper reports the construction result thereof. This submerged box forms a part of the submerged tunnel linking the urban area of the Kobe city and an artificial island as one of the traffic networks in the port of Kobe. Its construction shape employs the full sandwich structure. The structure is such that sheet steels in place of reinforcing bars and unreinforced concrete filled inside a steel shell enclosed by sheared reinforcing sheet steels are integrated to resist external force. 1 ref., 9 figs., 4 tabs.

  18. Effects of debonds and face sheet damage in GRP sandwich panels in naval ships

    DEFF Research Database (Denmark)

    Hayman, B.; Berggreen, Christian; Quispitupa, Amilcar

    2009-01-01

    Sandwich construction with face sheets of fibre-reinforced plastics (FRP) and a core of polymer foam or balsa wood offer a lightweight construction that is well suited to naval and other vessels for high-speed operation or where payload considerations require that the structural weight be minimised......-core debonds and face sheet impact damage is being extended to cover sandwich lay-ups with non-crimp glass reinforcements, vinylester matrix materials and foam cores of both PVC and PMI. Cases with both compressive and (for face sheet impact damage) tensile loading are considered. Modelling approaches...

  19. Static and Fatigue Characterization of Nomex Honeycomb Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Keskes Boualem

    2013-07-01

    Full Text Available The main benefits of using the sandwich concept in structural components are the high stiffness, good fatigue resistance and low weight ratios. Recent advances in materials and construction techniques have resulted in further improvement and increased uniformity of the sandwich composite properties. In order to use these materials in different applications, the knowledge of simply their static properties alone is not sufficient but additional information on their fatigue properties and durability are required. In this paper, first static and fatigue tests on four points bending of nomex honeycomb composite sandwich panels have been performed. Load/displacement and S-N fatigue curves are presented and analysed. Fatigue failure and damage modes are observed with an optical microscope and are discussed. The second is to address such fatigue behaviour by using a damage model and check it by experimentation. This fatigue damage model is based on stiffness degradation, which is used as a damage indicator. Two non-linear cumulative damage models derived from the chosen stiffness degradation equation are examined with assumption of linear Miner's damage summation. Predicted results are compared with available experimental data.

  20. New "sandwich" structures conformed from three dimensional

    Directory of Open Access Journals (Sweden)

    Alba, Juan J.

    1996-03-01

    Full Text Available Poor interlaminar properties as well as poor-skin-to-core adhesion properties are very often the common existing problems we find when designing with "sandwich" structures. A new type of 3D-fabric "sandwich" structure is being developed in order to avoid these problems. Although the manufacturing process is very simple, a very complex "sandwich" structure is obtained as a result of the complexity of the 3D-fabric used. This 3D-fabric is a 3D woven glass fabric produced on velvet weaving machines with glass yarns. It is an integrally woven "sandwich" laminate for all kinds of composite products. The strength of the vertical fibers makes, that also after impregnation with a resin matrix, the "sandwich" structure is maintained. The result is a laminate with high strength and stiffness and low weight. On each side of this "sandwich" laminate additional reinforcement materials can be laminated and a synthetic foam can be injected in the hollow structure. This will allow to establish the mechanical properties of a finished product.

    Las pobres propiedades, tanto interlaminares como de adhesión entre piel y núcleo, constituyen uno de los grandes problemas cuando se diseñan estructuras utilizando paneles tipo "sandwich". Un nuevo tipo de panel "sandwich", configurado a partir de tejidos tridimensionales, está siendo desarrollado en la actualidad con el objetivo de eliminar esos problemas. Aunque el proceso de fabricación es muy simple, el panel "sandwich" obtenido es de estructura compleja, como resultado de la complejidad del tejido tridimensional utilizado. Este tejido tridimensional (3D es un tejido de fibra de vidrio producido en máquinas de tejer especializadas. La resistencia de las fibras verticales hace que, después de la impregnación con una resina, se mantenga la configuración tipo "sandwich". El resultado es un laminado de alta resistencia, gran rigidez y bajo peso. Sobre cada uno de los lados del panel "sandwich" se pueden

  1. Out-of-plane shear strength of steel-concrete sandwich panels

    OpenAIRE

    Sagaseta, Juan; Francis, Philip

    2017-01-01

    Steel-concrete-steel (SCS) sandwich panels consist of two steel plates connected with tie bars filled with concrete; composite action is achieved using headed studs in the plates. This form of composite construction has recently regained interest in the construction industry as it allows modular construction and decongestion of reinforcement which is particularly useful in large infrastructure such as tunnels, wind turbines and nuclear energy facilities. This paper investigates...

  2. Experimental study of acoustical characteristics of honeycomb sandwich structures

    Science.gov (United States)

    Peters, Portia Renee

    Loss factor measurements were performed on sandwich panels to determine the effects of different skin and core materials on the acoustical properties. Results revealed inserting a viscoelastic material in the core's mid-plane resulted in the highest loss factor. Panels constructed with carbon-fiber skins exhibited larger loss factors than glass-fiber skins. Panels designed to achieve subsonic wave speed did not show a significant increase in loss factor above the coincidence frequency. The para-aramid core had a larger loss factor value than the meta-aramid core. Acoustic absorption coefficients were measured for honeycomb sandwiches designed to incorporate multiple sound-absorbing devices, including Helmholtz resonators and porous absorbers. The structures consisted of conventional honeycomb cores filled with closed-cell polyurethane foams of various densities and covered with perforated composite facesheets. Honeycomb cores filled with higher density foam resulted in higher absorption coefficients over the frequency range of 50 -- 1250 Hz. However, this trend was not observed at frequencies greater than 1250 Hz, where the honeycomb filled with the highest density foam yielded the lowest absorption coefficient among samples with foam-filled cores. The energy-recycling semi-active vibration suppression method (ERSA) was employed to determine the relationship between vibration suppression and acoustic damping for a honeycomb sandwich panel. Results indicated the ERSA method simultaneously reduced the sound transmitted through the panel and the panel vibration. The largest reduction in sound transmitted through the panel was 14.3% when the vibrations of the panel were reduced by 7.3%. The influence of different design parameters, such as core density, core material, and cell size on wave speeds of honeycomb sandwich structures was experimentally analyzed. Bending and shear wave speeds were measured and related to the transmission loss performance for various material

  3. Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels

    DEFF Research Database (Denmark)

    Berggreen, Christian; Lundsgaard-Larsen, Christian; Karlsen, Kasper

    2007-01-01

    In many naval ships of fiber composite sandwich construction an X-joint exists where the end bulkhead of the superstructure is attached to the deck, with a bulkhead placed in the same vertical plane below the deck. As the hull girder flexes this joint is subjected to alternating tensile...

  4. Design of X-joints in Sandwich Structures for Naval Vessels

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Lundsgaard-Larsen, Christian

    2007-01-01

    In many naval ships of fibre composite sandwich construction, an X-joint exists where the end bulkhead of the superstructure is attached to the deck, with an internal bulkhead placed in the same vertical plane below the deck. This joint is subjected to alternating tensile and compressive loading...

  5. Application and Analysis of Sandwich Elements in the Primary Structure of Large Wind Turbine Blades

    DEFF Research Database (Denmark)

    Berggreen, Christian; Branner, Kim; Jensen, Jacob Fisker

    2007-01-01

    The present work studies the advantages of applying a sandwich construction as opposed to traditional single skin composites in the flanges of a load carrying spar in a future 180 m wind turbine rotor. A parametric finite element model is used to analyze two basic designs with single skin...

  6. Transient Thermal Testing and Analysis of a Thermally Insulating Structural Sandwich Panel

    Science.gov (United States)

    Blosser, Max L.; Daryabeigi, Kamran; Bird, Richard K.; Knutson, Jeffrey R.

    2015-01-01

    A core configuration was devised for a thermally insulating structural sandwich panel. Two titanium prototype panels were constructed to illustrate the proposed sandwich panel geometry. The core of one of the titanium panels was filled with Saffil(trademark) alumina fibrous insulation and the panel was tested in a series of transient thermal tests. Finite element analysis was used to predict the thermal response of the panel using one- and two-dimensional models. Excellent agreement was obtained between predicted and measured temperature histories.

  7. A multifunctional heat pipe sandwich panel structure

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Wadley, Haydn N.G. [University of Virginia, Department of Materials Science and Engineering, 140 Chemistry Way, P.O. Box 400745, Charlottesville, VA 22904 (United States); Carbajal, Gerardo [University of Turabo, School of Engineering, P.O. Box 3030, Gurabo 00778 (Puerto Rico); Peterson, G.P. [University of Colorado at Boulder, 914 Broadway, Boulder, CO 80309 (United States)

    2008-01-15

    A multifunctional sandwich panel combining efficient structural load support and thermal management characteristics has been designed and experimentally assessed. The concept is based upon a truncated, square honeycomb sandwich structure. In closed cell honeycomb structures, the transport of heat from one face to the other occurs by a combination of conduction through the webs and convection/radiation within the cells. Here, much more effective heat transport is achieved by multifunctionally utilizing the core as a heat pipe sandwich panel. Its interior consists of a 6061 aluminum truncated-square honeycomb core covered with a stochastic open-cell nickel foam wick. An electroless nickel plating barrier layer inhibited the chemical reaction between the deionized water working fluid and the aluminum structure, retarding the generation of non-condensable hydrogen gas. A thermodynamic model was used to guide the design of the heat pipe sandwich panel. We describe the results of a series of experiments that validate the operational principle of the multifunctional heat pipe sandwich panel and characterize its transient response to an intense localized heat source. The systems measured thermal response to a localized heat source agrees well with that predicted by a finite difference method model used to predict the thermal response. (author)

  8. Energy Dissipation in Sandwich Structures During Axial Compression

    DEFF Research Database (Denmark)

    Urban, Jesper

    2002-01-01

    The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full-scale structu......The purpose of this paper is to investigate the energy dissipation in sandwich structures during axial crushing. Axial crushing tests on six sandwich elements are described. The sandwich elements consist of a polyurethane core and E-glass/Polyester skin. The elements compare to full...

  9. Structural Response of Polyethylene Foam-Based Sandwich Panels Subjected to Edgewise Compression

    Directory of Open Access Journals (Sweden)

    Luciano Lamberti

    2013-10-01

    Full Text Available This study analyzes the mechanical behavior of low density polyethylene foam core sandwich panels subjected to edgewise compression. In order to monitor panel response to buckling, strains generated in the facesheets and overall out-of-plane deformations are measured with strain gages and projection moiré, respectively. A finite element (FE model simulating the experimental test is developed. Numerical results are compared with moiré measurements. After having been validated against experimental evidence, the FE model is parameterized, and a trade study is carried out to investigate to what extent the structural response of the panel depends on the sandwich wall construction and facesheet/core interface defects. The projection moiré set-up utilized in this research is able to capture the sudden and very localized buckling phenomena occurring under edgewise compression of foam-based sandwich panels. Results of parametric FE analyses indicate that, if the total thickness of the sandwich wall is fixed, including thicker facesheets in the laminate yields a larger deflection of the panel that becomes more sensitive to buckling. Furthermore, the mechanical response of the foam sandwich panel is found to be rather insensitive to the level of waviness of core-facesheet interfaces.

  10. Vibro-acoustics of lightweight sandwich structures

    CERN Document Server

    Lu, Tianjian

    2014-01-01

    Vibro-Acoustics of Lightweight Sandwich Structures introduces the study of the coupled vibration and acoustic behavior of lightweight sandwich structures in response to harmonic force and sound pressure. This book focuses on the theoretical modeling and experimental investigation of lightweight sandwich structures in order to provide a predictive framework for vibro-acoustic characteristics of typical engineering structures. Furthermore, by developing solution tools, it concentrates on the influence of key systematic parameters leading to effective guidance for optimal structure design toward lightweight, high-stiffness and superior sound insulation capability. This book is intended for researchers, scientists, engineers and graduate students in mechanical engineering especially in structural mechanics, mechanics and acoustics. Fengxian Xin and Tianjian Lu both work at the School of Aerospace, Xi’an Jiaotong University.

  11. Fire development and wall endurance in sandwich and wood-frame structures

    Science.gov (United States)

    Carlton A. Holmes; Herbert W. Eickner; John J. Brenden; Curtis C. Peters; Robert H. White

    1980-01-01

    Large-scale fire tests were conducted on seven 16- by 24-foot structures. Four of these structures were of sandwich construction with cores of plastic or paper honeycomb and three were of wood-frame construction. The wasss were loaded to a computer design loading, and the fire endurance determined under a fire exposure from a typical building contents loading of 4-1/2...

  12. AA, sandwich line with magnetic horn

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    The magnetic horn, focusing the antiprotons emanating from the target, was affixed to a sandwich line through which the 150 kA pulses were supplied. Expecting to have to change from time to time the fragile horn (inner conductor only 0.7 mm thick), the assembly was designed for quick exchange. At the lower end of the sandwich line we see the connectors for the high-current cables, at the upper end the magnet horn. It has just been lifted from the V-supports which held it aligned downstream of the target. Continue with 8010293.

  13. Ultra-Light Asymmetric Photovoltaic Sandwich Structures

    OpenAIRE

    Rion, J.; Leterrier, Y.; Månson, J.-A. E.; Blairon, Jean-Marie

    2009-01-01

    This work evaluated the possibility of using silicon solar cells as load-carrying elements in composite sandwich structures. Such an ultra-light multifunctional structure is a new concept enabling weight, and thus energy, to be saved in high-tech applications such as solar cars, solar planes or satellites. Composite sandwich structures with a weight of not, vert, similar800 g/m2 were developed, based on one 140 μm thick skin made of 0/90° carbon fiber-reinforced plastic (CFRP), one skin made ...

  14. Insert Design and Manufacturing for Foam-Core Composite Sandwich Structures

    Science.gov (United States)

    Lares, Alan

    Sandwich structures have been used in the aerospace industry for many years. The high strength to weight ratios that are possible with sandwich constructions makes them desirable for airframe applications. While sandwich structures are effective at handling distributed loads such as aerodynamic forces, they are prone to damage from concentrated loads at joints or due to impact. This is due to the relatively thin face-sheets and soft core materials typically found in sandwich structures. Carleton University's Uninhabited Aerial Vehicle (UAV) Project Team has designed and manufactured a UAV (GeoSury II Prototype) which features an all composite sandwich structure fuselage structure. The purpose of the aircraft is to conduct geomagnetic surveys. The GeoSury II Prototype serves as the test bed for many areas of research in advancing UAV technologies. Those areas of research include: low cost composite materials manufacturing, geomagnetic data acquisition, obstacle detection, autonomous operations and magnetic signature control. In this thesis work a methodology for designing and manufacturing inserts for foam-core sandwich structures was developed. The results of this research work enables a designer wishing to design a foam-core sandwich airframe structure, a means of quickly manufacturing optimized inserts for the safe introduction of discrete loads into the airframe. The previous GeoSury II Prototype insert designs (v.1 & v.2) were performance tested to establish a benchmark with which to compare future insert designs. Several designs and materials were considered for the new v.3 inserts. A plug and sleeve design was selected, due to its ability to effectively transfer the required loads to the sandwich structure. The insert material was chosen to be epoxy, reinforced with chopped carbon fibre. This material was chosen for its combination of strength, low mass and also compatibility with the face-sheet material. The v.3 insert assembly is 60% lighter than the

  15. AA, sandwich line with magnetic horn

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    Continuation from 8010293: Finally, the sandwich line with the horn is placed on the ground, for the horn to be inspected and, if needed, exchanged for a new one. The whole procedure was trained with several members of the AA team, for quick and safe handling, and to share the radiation dose amongst them.

  16. Compressive properties of sandwiches with functionally graded ...

    Indian Academy of Sciences (India)

    The compressive behaviour of a new class of sandwich composite made up of jute fiber reinforced epoxy skins and piece-wise linear fly ash reinforced functionally graded (FG) rubber core is investigated in flat-wise mode. FG samples are prepared using conventional casting technique. Presence of gradation is quantified ...

  17. X-joints in composite sandwich panels

    NARCIS (Netherlands)

    Vredeveldt, A.W.; Janssen, G.Th.M.

    1998-01-01

    The small structural weight of fast large ships such as fast mono hulls or catamaran type of ships is of extreme importance to their success. One possible light weight structural solution is the sandwich panel with fibre reinforced laminates and a balsa, honeycomb or foam core. A severe obstacle for

  18. Buckling driven debonding in sandwich columns

    DEFF Research Database (Denmark)

    Østergaard, Rasmus Christian

    2008-01-01

    results from two mechanisms: (a) interaction of local debond buckling and global buckling and (b) the development of a damaged zone at the debond crack tip. Based on the pronounced imperfection sensitivity, the author predicts that an experimental measurement of the strength of sandwich structures may...... exhibit a large scatter caused by geometrical variations between test specimens. (C) 2007 Elsevier Ltd. All rights reserved....

  19. Compressive properties of sandwiches with functionally graded ...

    Indian Academy of Sciences (India)

    fly ash by weight. Finally, the cured core sample is removed from the mold and the edges are trimmed. To prepare the sandwich skins, a bi-directional woven jute fabric procured from M/S Barde Agencies, Belgaum, Kar- nataka, India is used. This fabric is cut into layers of dimen- sions 55 mm × 55 mm in required orientation.

  20. Natural fabric sandwich laminate composites: development and ...

    Indian Academy of Sciences (India)

    A scanning electron microscope (SEM) and optical microscope are used for qualitative analysis of NFSL composites' interfacial properties. Two layers of jute and three layers of linen sandwich laminate have registered peak values in tensile and impact properties. The five layers of linen laminate composite have exhibited ...

  1. Behaviour of Metal Foam Sandwich Panels

    DEFF Research Database (Denmark)

    Alkhudery, Hayder; Virdi, Kuldeep

    2011-01-01

    Sandwich panels as used in structures comprise of a foam core enclosed by thin high strength steel faces. This paper discusses currently design formulae of local buckling behaviour of such panels using the finite element method. Multiple wave finite element models were adopted to investigate...

  2. Structural detailing of openings in sandwich panels

    NARCIS (Netherlands)

    Tomà, T.; Courage, W.

    1996-01-01

    European Recommendations exist which provide calculation rules to determine the strength and stiffness of sandwich panels composed of two metal faces with a foam in between. In case of openings in such panels (e.g. for windows) an influence will appear with regard to the stiffness and loadbearing

  3. Organometallic half-sandwich iridium anticancer complexes

    NARCIS (Netherlands)

    Liu, Z.; Habtemariam, A.; Pizarro, A.M.; Fletcher, S.A.; Kisova, A.; Vrana, O.; Salassa, L.; Bruijnincx, P.C.A.|info:eu-repo/dai/nl/33799529X; Clarkson, G.J.; Brabec, V.; Sadler, Peter J.

    2011-01-01

    The low-spin 5d6 IrIII organometallic half-sandwich complexes [(η5-Cpx)Ir(XY)Cl]0/+, Cpx = Cp*, tetramethyl(phenyl)cyclopentadienyl (Cpxph), or tetramethyl(biphenyl)cyclopentadienyl (Cpxbiph), XY = 1,10-phenanthroline (4−6), 2,2′-bipyridine (7−9), ethylenediamine (10 and 11), or picolinate (12−14),

  4. Modular FRP sandwich structures for building floor construction

    OpenAIRE

    Satasivam, Sindu Saprina

    2017-01-01

    Fibre reinforced polymers (FRP) have many advantageous properties compared to traditional steel and concrete, such as lightness in weight and corrosion resistance. FRP is high in strength and, when used as load-bearing members in building structures, can also provide function integration (such as thermal insulation) and environmental benefits (especially when glass fibres are used, i.e. glass fibre reinforced polymers or GFRP). This makes GFRP a promising structural material for building floo...

  5. Applications of thin-film sandwich crystallization platforms.

    Science.gov (United States)

    Axford, Danny; Aller, Pierre; Sanchez-Weatherby, Juan; Sandy, James

    2016-04-01

    Examples are shown of protein crystallization in, and data collection from, solutions sandwiched between thin polymer films using vapour-diffusion and batch methods. The crystallization platform is optimal for both visualization and in situ data collection, with the need for traditional harvesting being eliminated. In wells constructed from the thinnest plastic and with a minimum of aqueous liquid, flash-cooling to 100 K is possible without significant ice formation and without any degradation in crystal quality. The approach is simple; it utilizes low-cost consumables but yields high-quality data with minimal sample intervention and, with the very low levels of background X-ray scatter that are observed, is optimal for microcrystals.

  6. Buckling optimisation of sandwich cylindrical panels

    Science.gov (United States)

    Abouhamzeh, M.; Sadighi, M.

    2016-06-01

    In this paper, the buckling load optimisation is performed on sandwich cylindrical panels. A finite element program is developed in MATLAB to solve the governing differential equations of the global buckling of the structure. In order to find the optimal solution, the genetic algorithm Toolbox in MATLAB is implemented. Verifications are made for both the buckling finite element code and also the results from the genetic algorithm by comparisons to the results available in literature. Sandwich cylindrical panels are optimised for the buckling strength with isotropic or orthotropic cores with different boundary conditions. Results are presented in terms of stacking sequence of fibers in the face sheets and core to face sheet thickness ratio.

  7. Utilization of Bamboo as Lightweight Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Suthon SRIVARO

    2016-05-01

    Full Text Available Lightweight sandwich panels consisting of bamboo faces and oil palm trunk core were manufactured using melamine urea formaldehyde with the resin content of 250 g/m2 (solid basis. The parameters examined were node and density of bamboo faces. Physical (board density, thickness swelling and water absorption and mechanical (modulus of elasticity and modulus of rupture properties of the sandwich board obtained were investigated and compared with other bamboo products and commercial wood based products. Result showed that this panel had better dimensional stability than those of other bamboo products but lower bending strength. Node of bamboo had no significant effect on any board properties examined. Most of board properties were influenced by bamboo face density. Comparing the properties to commercial wood based products, this panel could be used as wall/floor applications.

  8. Impact response of balsa core sandwiches

    OpenAIRE

    Nurdane Mortas; Paulo N.B. Reis; José A.M. Ferreira

    2014-01-01

    The benefits of resins nano-enhanced on the impact response of sandwich composites made by fiber glass/epoxy skins and balsa wood core were studied. Afterwards, the influence of the core's discontinuity was analyzed in terms of impact strength. For better dispersion and interface adhesion matrix/clay nanoclays were previously subjected to a silane treatment appropriate to the epoxy resin. Resins enhanced by nanoclays promote higher maximum impact loads, lower displacements and the...

  9. Study on application of concrete sandwich insulation material in library building insulation

    Science.gov (United States)

    Yang, Zengzhang

    2017-06-01

    Energy shortage is the short slab that restricts the development of social economy, and the rational and effective use of energy is the principle of sustainable development. Building energy consumption accounts for about 30% of total social energy consumption, and this ratio has continued to rise, so the energy saving potential is great in the construction sector. In view of the building energy consumption problem, we produce green insulation building materials with the crop straw, and improve the construction of hot and humid environment. In this paper, we take concrete sandwich straw blocks in library building as the research object, through the experiment to test its winter heat consumption and summer power consumption indicators, carry out experimental study on thermal insulation performance, and explore the overall thermal and energy saving performance of concrete sandwich straw blocks in library building.

  10. Asymmetric MoS2 /Graphene/Metal Sandwiches: Preparation, Characterization, and Application.

    Science.gov (United States)

    Toth, Peter S; Velický, Matĕj; Bissett, Mark A; Slater, Thomas J A; Savjani, Nicky; Rabiu, Aminu K; Rakowski, Alexander M; Brent, Jack R; Haigh, Sarah J; O'Brien, Paul; Dryfe, Robert A W

    2016-10-01

    The polarizable organic/water interface is used to construct MoS2 /graphene nanocomposites, and various asymmetrically dual-decorated graphene sandwiches are synthesized. High-resolution transmission electron microscopy and 3D electron tomography confirm their structure. These dual-decorated graphene-based hybrids show excellent hydrogen evolution activity and promising capacitance performance. © 2016 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Thermal conductivity of newspaper sandwiched aerated lightweight concrete panel

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Soon-Ching; Low, Kaw-Sai [Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Jalan Genting Kelang, Setapak, 53300 Kuala Lumpur, Wilayah Persekutuan (Malaysia)

    2010-12-15

    Investigation on the thermal conductivity of newspaper sandwiched aerated lightweight concrete (ALC) panels is the main purpose of this study. Various densities of ALC panels ranging from 1700, 1400 and 1100 kg/m{sup 3} with three different aerial intensities of newspaper sandwiched were produced. Investigation was limited to the effect of aerial intensity of newspaper sandwiched and the effect of density of ALC on thermal conductivity. It is found that the thermal conductivity of newspaper sandwiched ALC panels reduced remarkably compared to control ALC panels. The reduction was recorded at 18.0%, 21.8% and 20.7% correspond to densities of 1700, 1400 and 1100 kg/m{sup 3} with just a mere 0.05 g/cm{sup 2} aerial intensity of newspaper sandwiched. Newspaper sandwiched has a significant impact on the performance of thermal conductivity of ALC panels based on regression analysis. (author)

  12. Combined shear/compression structural testing of asymmetric sandwich structures

    OpenAIRE

    Castanié, Bruno; Barrau, Jean-Jacques; Jaouen, Jean-Pierre; Rivallant, Samuel

    2004-01-01

    Asymmetric sandwich technology can be applied in the design of lightweight, non-pressurized aeronautical structures such as those of helicopters. A test rig of asymmetric sandwich structures subjected to compression/shear loads was designed, validated, and set up. It conforms to the standard certification procedure for composite aeronautical structures set out in the “test pyramid”, a multiscale approach. The static tests until failure showed asymmetric sandwich structures to be extremely res...

  13. The sandwich generation copes with elder care.

    Science.gov (United States)

    Seaward, M R

    1999-01-01

    The "sandwich generation" refers to the demographic age group of individuals who are caring for young children and elder parents at the same time. The increasing number of employees who must care for children and parents alike is a trend that is projected to continue. This is a burdensome responsibility that can cause stress and result in loss of productivity, accompanied by higher cost, to employers. The author discusses elder-care services that employers can offer to enhance productivity and gives case examples of companies that are making elder-care benefits available to employees.

  14. Impact response of balsa core sandwiches

    Directory of Open Access Journals (Sweden)

    Nurdane Mortas

    2014-10-01

    Full Text Available The benefits of resins nano-enhanced on the impact response of sandwich composites made by fiber glass/epoxy skins and balsa wood core were studied. Afterwards, the influence of the core's discontinuity was analyzed in terms of impact strength. For better dispersion and interface adhesion matrix/clay nanoclays were previously subjected to a silane treatment appropriate to the epoxy resin. Resins enhanced by nanoclays promote higher maximum impact loads, lower displacements and the best performance in terms of elastic recuperation. The core's discontinuity decreases the impact strength, but the resin enhanced by nanoclays promotes significant benefits.

  15. Sandwiched Thin-Film Anode of Chemically Bonded Black Phosphorus/Graphene Hybrid for Lithium-Ion Battery.

    Science.gov (United States)

    Liu, Hanwen; Zou, Yuqin; Tao, Li; Ma, Zhaoling; Liu, Dongdong; Zhou, Peng; Liu, Hongbo; Wang, Shuangyin

    2017-09-01

    A facile vacuum filtration method is applied for the first time to construct sandwich-structure anode. Two layers of graphene stacks sandwich a composite of black phosphorus (BP), which not only protect BP from quickly degenerating but also serve as current collector instead of copper foil. The BP composite, reduced graphene oxide coated on BP via chemical bonding, is simply synthesized by solvothermal reaction at 140 °C. The sandwiched film anode used for lithium-ion battery exhibits reversible capacities of 1401 mAh g-1 during the 200th cycle at current density of 100 mA g-1 indicating superior cycle performance. Besides, this facile vacuum filtration method may also be available for other anode material with well dispersion in N-methyl pyrrolidone (NMP). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Deflections of anisotropic sandwich beams with variable face sheets and core thicknesses

    Science.gov (United States)

    Lu, Chu-Ho

    1994-01-01

    A sandwich construction consists of a low-density core material with high strength face sheets bounded to the top and bottom surfaces. The construction has been widely used in the aerospace and marine industries due to its outstanding characteristics such as noise absorption, weight minimization, heat insulation, and better bending stiffness. In sandwich structures used in high-performance aircraft, the face sheets are often made of fiber-reinforced composite materials and the core is made of honeycomb. The structures may also have variable thickness so as to satisfy aerodynamic requirements. In the stress analysis, the constant-thickness face sheets are usually considered as membrane and the core is assumed to be inextensible but deformable in the thickness direction. The static behavior of variable-thickness, isotropic and homogeneous sandwich beams was successfully studied by employing a constant-thickness theory but allowing stiffnesses to vary in accordance with local thickness variations. It has been recently found in a refined theory that the analyses based on the constant thickness theory locally can lead to significant errors in structural responses if the sandwich beam is thickness-tapered and the cores are deformable in transverse shear. The errors arise mainly from two factors: (1) the transverse shear components of the membrane forces in the face sheets alter the transverse shears carried by the core; and (2) the face-sheet membrane strains arise from transverse shear deformation of the core. In practice the variable thickness may not only exist in core but also in face sheets. The thickness-variations may even be a type of step function. In this case the transverse shear stress in the face sheets and bending stress in the core should be taken into account in the refined theory mentioned. In the present study, energy principles are employed in deriving governing equations for general bending of anisotropic sandwich beams with variable thickness in both

  17. Nurse managers and the sandwich support model.

    Science.gov (United States)

    Chisengantambu, Christine; Robinson, Guy M; Evans, Nina

    2017-09-15

    To explore the interplay between the work of nurse managers and the support they receive and provide. Support is the cornerstone of management practices and is pivotal in employees feeling committed to an organisation. Support for nurse managers is integral to effective health sector management; its characteristics merit more attention. The experiences of 15 nurse managers in rural health institutions in South Australia were explored using structured interviews, observation and document review. Effective decision making requires adequate support, which influences the perceptions and performance of nurse managers, creating an environment in which they feel appreciated and valued. An ideal support system is proposed, the "sandwich support model," to promote effective functioning and desirable patient outcomes via support "from above" and "from below." The need to support nurse managers effectively is crucial to how they function. The sandwich support model can improve management practices, more effectively assisting nurse managers. Organisations should revisit and strengthen support processes for nurse managers to maximize efficiencies. This paper contributes to understanding the importance of supporting nurse managers, identifying the processes used and the type of support offered. It highlights challenges and issues affecting support practices within the health sector. © 2017 John Wiley & Sons Ltd.

  18. Dynamic Failure of Composite and Sandwich Structures

    CERN Document Server

    Abrate, Serge; Rajapakse, Yapa D S

    2013-01-01

    This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors.  The first section deals with fluid-structure interactions in marine structures.  The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures.  Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature.  Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of...

  19. Experimental investigations of sandwich panels using high performance concrete thin plates exposed to fire

    DEFF Research Database (Denmark)

    Hulin, Thomas; Hodicky, Kamil; Schmidt, Jacob Wittrup

    2015-01-01

    Structural sandwich panels using thin high performance concrete (HPC) plates offer a possibility to address the modern environmental challenges faced by the construction industry. Fire resistance is a major necessity in structures using HPC. This paper presents experimental studies at elevated...... temperatures for panels with 30 mm thick plates stiffened by structural ribs, thick insulation layers, and steel shear connecting systems. Parametric variation assessing the role of each component of the sandwich structure was performed on unloaded specimens of reduced size. Full size walls were tested...... plate and one of them experienced heavy heat-induced spalling. Results highlighted insulation shear failure from differential thermal expansion at the interface with concrete. It suggests the existence of a high bond level between the two materials which might allow structural applications at early age...

  20. Open versus closed sandwich wound dressing method in burn ...

    African Journals Online (AJOL)

    Methods: A retrospective study was conducted on 170 children under 12years admitted to the Pediatric surgical/female burn ward between the months of June 2006 to March 2007. A comparison was made between the open and closed sandwich method of burn wound dressing. The sandwich method entailed using 17 by ...

  1. Practical Instruction in Tissue Culture and Cytogenetics for Sandwich Students.

    Science.gov (United States)

    Williams, D. C.; Bishun, N. P.

    1973-01-01

    Describes the training and practical techniques taught to students involved in a sandwich course at the Tissue Culture and Cytogenetics Unit of the Marie Curie Memorial Foundation, Surrey, England. Students spend a minimum of six months involved in the sandwich course before returning to university for a final academic year. (JR)

  2. Non-linear analytical solutions for laterally loaded sandwich plates

    DEFF Research Database (Denmark)

    Riber, Hans Jørgen

    1997-01-01

    This work focuses on the response of orthotropic sandwich composite plates with large deflections due to high lateral loads. The results have special application to the design of ship structures. A geometrical nonlinear theory is outlined, on the basis of the classical sandwich plate theory...

  3. The sandwich sign | Mahomed | SA Journal of Radiology

    African Journals Online (AJOL)

    The sandwich sign refers to the sandwiching of mesenteric vessels and fat by enlarged mesenteric nodes on cross-sectional imaging, commonly occurring in lymphoma, but not specific to lymphoma. The sign is radiologically indistinguishable from post-transplant lymphoproliferative disorders. The radiological significance ...

  4. Non-linear Behavior of Curved Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Jolma, P.; Karjalainen, J. P.

    2003-01-01

    In this paper the non-linear behavior of curved sandwich panels is investigated both numerically and experimentally. Focus is on various aspects of finite element modeling and calculation procedures. A simply supported, singly curved, CFRP/PVC sandwich panel is analyzed under uniform pressure load...

  5. Design Analysis of the Mixed Mode Bending Sandwich Specimen

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2010-01-01

    . The analysis facilitates selection of the appropriate geometry for the MMB sandwich specimen to promote debond failure. An experimental study is performed using MMB sandwich specimens with a H100 PVC foam core and E-glass–polyester faces. The results reveal that debond propagation is successfully achieved...

  6. Measuring Cohesive Laws for Interfaces in Sandwich Structures

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Sørensen, Bent F.; Berggreen, Carl Christian

    2006-01-01

    mixities. The sandwich specimens consists of glass fiber faces and Divinycell H200 foam core with a pre-crack between face and core made with teflon film. Arbitrary stiffening of the sandwich faces with steel bars adhered to the faces reduces rotations and ensures that the method is useable for a wide...

  7. Tailoring Sandwich Face/Core Interfaces for Improved Damage Tolerance

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Carlsson, Leif A.

    2010-01-01

    Various modifications of the face/core interface in foam core sandwich specimens are examined in a series of two papers. This paper constitutes part I and describes the finite element analysis of a sandwich test specimen, i.e. a DCB specimen loaded by uneven bending moments (DCB-UBM). Using...

  8. Fracture Analysis of Debonded Sandwich Columns Under Axial Compression

    DEFF Research Database (Denmark)

    May, A.; Avilés, F.; Berggreen, Christian

    A sandwich structure consists of two strong and stiff face sheets bonded to a weak low density core. The large separation between the face sheets provides increased bending rigidity and strength at low weight cost. Thus, sandwich structures frequently present better mechanical properties than mon...

  9. Design and manufacturing of bio-based sandwich structures

    CSIR Research Space (South Africa)

    John, Maya J

    2017-03-01

    Full Text Available The aim of this chapter is to discuss the design and manufacturing of bio-based sandwich structures. As the economic advantages of weight reduction have become mandatory for many advanced industries, bio-based sandwich panels have emerged...

  10. Influence of reinforcement type on the mechanical behavior and fire response of hybrid composites and sandwich structures

    Science.gov (United States)

    Giancaspro, James William

    Lightweight composites and structural sandwich panels are commonly used in marine and aerospace applications. Using carbon, glass, and a host of other high strength fiber types, a broad range of laminate composites and sandwich panels can be developed. Hybrid composites can be constructed by laminating multiple layers of varying fiber types while sandwich panels are manufactured by laminating rigid fiber facings onto a lightweight core. However, the lack of fire resistance of the polymers used for the fabrication remains a very important problem. The research presented in this dissertation deals with an inorganic matrix (Geopolymer) that can be used to manufacture laminate composites and sandwich panels that are resistant up to 1000°C. This dissertation deals with the influence of fiber type on the mechanical behavior and the fire response of hybrid composites and sandwich structures manufactured using this resin. The results are categorized into the following distinct studies. (i) High strength carbon fibers were combined with low cost E-glass fibers to obtain hybrid laminate composites that are both economical and strong. The E-glass fabrics were used as a core while the carbon fibers were placed on the tension face and on both tension and compression faces. (ii) Structural sandwich beams were developed by laminating various types of reinforcement onto the tension and compression faces of balsa wood cores. The flexural behavior of the beams was then analyzed and compared to beams reinforced with organic composite. The effect of core density was evaluated using oak beams reinforced with inorganic composite. (iii) To measure the fire response, balsa wood sandwich panels were manufactured using a thin layer of a fire-resistant paste to serve for fire protection. Seventeen sandwich panels were fabricated and tested to measure the heat release rates and smoke-generating characteristics. The results indicate that Geopolymer can be effectively used to fabricate both

  11. Standard Test Method for Sandwich Corrosion Test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  12. High Conductive CFRP Sandwich Technologies for Platforms

    Science.gov (United States)

    Ihle, Alexander; Hartmann, D.; Wurfl, T.; Reichmann, O.; Liedtke, V.; Tschepe, C.; Berrill, M.

    2014-06-01

    A general trend in the design of Satellites structures is to use more and more extensively CFRP materials. These materials are lighter, stiffer and have a better dimensional stability than their metallic counterparts. However, the usually used CFRP materials have a low thermal conductivity, which makes the use of these materials difficult if not impossible for all parts that must conduct and distribute heat.For such applications, aluminium skin/core panels are often used for e.g. radiative structure panels. The goal of the study was to design, manufacture and test a CFRP spacecraft sandwich panel structure (based on a shear web supporting dissipative equipments) using high conductive CFRP in order to substitute common aluminium panels.

  13. Wave propagation in sandwich panels with a poroelastic core.

    Science.gov (United States)

    Liu, Hao; Finnveden, Svante; Barbagallo, Mathias; Arteaga, Ines Lopez

    2014-05-01

    Wave propagation in sandwich panels with a poroelastic core, which is modeled by Biot's theory, is investigated using the waveguide finite element method. A waveguide poroelastic element is developed based on a displacement-pressure weak form. The dispersion curves of the sandwich panel are first identified as propagating or evanescent waves by varying the damping in the panel, and wave characteristics are analyzed by examining their motions. The energy distributions are calculated to identify the dominant motions. Simplified analytical models are also devised to show the main physics of the corresponding waves. This wave propagation analysis provides insight into the vibro-acoustic behavior of sandwich panels lined with elastic porous materials.

  14. Sandwich Panel as a Structural Element of Overlap

    Directory of Open Access Journals (Sweden)

    Novikov Maxim

    2016-01-01

    Full Text Available This paper considers the issue of sandwich panels using as load-bearing structural elements. The comparison of deflections and critical failure loads were obtained by the results of the full-scale roof sandwich panels tests conducted by the company “Joris Ide” and the theoretical design, according to the calculation method described in Euronorms. Based on these results it was concluded that sandwich panels can be treated as a load-bearing structure only with more taught manufacturing requirements. Thus, the reduced spread of critical loads can be achieved.

  15. The Bending Strength, Internal Bonding and Thickness Swelling of a Five Layer Sandwiched Bamboo Particleboard

    Science.gov (United States)

    Jamaludin, M. A.; Bahari, S. A.; Nordin, K.; Soh, T. F. T.

    2010-03-01

    The demand for wood based material is increasing but the supply is decreasing. Therefore the price of these raw materials has increased. Bamboo provides an economically feasible alternative raw material for the wood based industry. Its properties are comparable to wood. It is also compatible with the existing processing technology. Bamboo is in abundance, easy to propagate and of short maturation period. Bamboo provides a cheaper alternative resource for the wood based industry. The development of new structural components from bamboo will widen its area of application from handicrafts to furniture and building components. In this study, five layer sandwiched bamboo particleboard were manufactured. The sandwiched Bamboo PB consists of a bamboo PB core, oil palm middle veneers and thin meranti surface veneers. The physical and mechanical properties of the bamboo sandwiched particleboards were tested in accordance to the BS-EN 317:1993 [1] and BS-EN 310:1993 [2], respectively. All the samples passed the standards. The modulus of elasticity was about 352% higher than the value specified in the BS standard, BS-EN 312-4:1996 [3]. The Internal bonding was about 23% higher than the general requirements specified in the standard. On the other hand, the thickness swelling was about 6% lower than the standard. No glue line failure was observed in the strength tests. Critical failures in the IB tests were observed in the particleboards. Tension failures were observed in the surface veneers in the bending tests. The five layer sandwiched bamboo particleboard can be used for light weight construction such as furniture, and wall and door panels in buildings.

  16. Measuring Moisture Levels in Graphite Epoxy Composite Sandwich Structures

    Science.gov (United States)

    Nurge, Mark; Youngquist, Robert; Starr, Stanley

    2011-01-01

    Graphite epoxy composite (GEC) materials are used in the construction of rocket fairings, nose cones, interstage adapters, and heat shields due to their high strength and light weight. However, they absorb moisture depending on the environmental conditions they are exposed to prior to launch. Too much moisture absorption can become a problem when temperature and pressure changes experienced during launch cause the water to vaporize. The rapid state change of the water can result in structural failure of the material. In addition, heat and moisture combine to weaken GEC structures. Diffusion models that predict the total accumulated moisture content based on the environmental conditions are one accepted method of determining if the material strength has been reduced to an unacceptable level. However, there currently doesn t exist any field measurement technique to estimate the actual moisture content of a composite structure. A multi-layer diffusion model was constructed with Mathematica to predict moisture absorption and desorption from the GEC sandwich structure. This model is used in conjunction with relative humidity/temperature sensors both on the inside and outside of the material to determine the moisture levels in the structure. Because the core materials have much higher diffusivity than the face sheets, a single relative humidity measurement will accurately reflect the moisture levels in the core. When combined with an external relative humidity measurement, the model can be used to determine the moisture levels in the face sheets. Since diffusion is temperaturedependent, the temperature measurements are used to determine the diffusivity of the face sheets for the model computations.

  17. Thermal Performance of Precast Concrete Sandwich Panel (PCSP) Design for Sustainable Built Environment

    Science.gov (United States)

    Ern, Peniel Ang Soon; Ling, Lim Mei; Kasim, Narimah; Hamid, Zuhairi Abd; Masrom, Md Asrul Nasid Bin

    2017-10-01

    Malaysia’s awareness of performance criteria in construction industry towards a sustainable built environment with the use of precast concrete sandwich panel (PCSP) system is applied in the building’s wall to study the structural behaviour. However, very limited studies are conducted on the thermal insulation of exterior and interior panels in PCSP design. In hot countries such as Malaysia, proper designs of panel are important to obtain better thermal insulation for building. This study is based on thermal performance of precast concrete sandwich panel design for sustainable built environment in Malaysia. In this research, three full specimens, which are control specimen (C), foamed concrete (FC) panels and concrete panels with added palm oil fuel ash (FC+ POFA), where FC and FC+POFA sandwiched with gypsum board (G) were produced to investigate their thermal performance. Temperature difference of exterior and interior surface of specimen was used as indicators of thermal-insulating performance of PCSP design. Heat transfer test by halogen lamp was carried out on three specimens where the exterior surface of specimens was exposed to the halogen lamp. The temperature reading of exterior and interior surface for three specimens were recorded with the help of thermocouple. Other factors also studied the workability, compressive strength and axial compressive strength of the specimens. This study has shown that FC + POFA specimen has the strength nearer to normal specimen (C + FC specimen). Meanwhile, the heat transfer results show that the FC+POFA has better thermal insulation performance compared to C and FC specimens with the highest temperature difference, 3.4°C compared to other specimens. The results from this research are useful to be implemented in construction due to its benefits such as reduction of energy consumption in air-conditioning, reduction of construction periods and eco-friendly materials.

  18. Enhanced Performance of Sandwich Structures by Improved Damage Tolerance

    DEFF Research Database (Denmark)

    Martakos, Georgios

    up to about 200,000 load cycles, and to assess the effect of high cycle fatigue damage propagation was simulated up to about 2,000,000 load cycles. It was demonstrated that the developed computational methodology is capable of modelling the fatigue behaviour of sandwich structures with embedded peel...... behaviour around the new crack stopper elements. In support for the experimental investigations, a Finite Element (FE) analysis based methodology, including fracture mechanics analysis and the so-called ‘cycle jump’ technique, was developed to predict the progression of damage in sandwich specimens...... with embedded crack stoppers. The starting point for the research was is a new design for a crack stopper, referred to as a ‘peel stopper’, which is proposed for foam cored sandwich structures. Initially, the ability of the peel stopper to prolong the fatigue life of sandwich structures has been demonstrated...

  19. Mechanical and vibro-acoustic aspects of composite sandwich cylinders

    NARCIS (Netherlands)

    Yuan, C.

    2013-01-01

    Designing a fuselage involves many considerations such as strength and stability, fatigue, damage tolerance, fire and lightning resistance, thermal and acoustic insulation, production, inspection, maintenance and repair. In the background of the application of composite sandwich structures on the

  20. Half-sandwich ruthenium, rhodium and iridium complexes of ...

    Indian Academy of Sciences (India)

    sandwich ruthenium, rhodium and iridium complexes of triazolopyridine ligand: Synthesis and structural studies. NARASINGA RAO PALEPU RAO MOHAN KOLLIPARA. Regular Article Volume 129 Issue 2 February 2017 pp 177-184 ...

  1. Composite Sandwich Structures for Shock Mitigation and Energy Absorption

    Science.gov (United States)

    2016-06-28

    Michelle S. Hoo Fatt Department of Mechanical Engineering College of Engineering Akron, Ohio 44325-3903 Tel: 330-972-6308 Defense Technical...examined. In the second or continuation grant period (July 2014 to Apri I 20 16), the research was extended to address the behavior of composite sandwich...panel theory is based mostly on linear elastic response. This research extended composite sandwich theory by considering the facesheets as anisotropic

  2. Simple Stiffness Tailoring of Balsa Sandwich Core Material

    OpenAIRE

    Kepler, J.A.

    2010-01-01

    Abstract A concept for improving the shear stiffness properties of balsa core material for sandwich structures is presented. The concept is based on utilization of the strongly orthotropic properties of the balsa wood, applying an appropriate transverse layup sequence. The effective core material shear modulus is modeled using basic laminate theory. This is subsequently validated through sandwich beam bending and lap shear experiments. Compared to the standard balsa core systems, a...

  3. A novel robotic arm driven by sandwich piezoelectric transducers.

    Science.gov (United States)

    Jiang, Zheng; Wang, Liang; Jin, Jiamei

    2018-03-01

    In this work, a novel robotic arm driven by sandwich piezoelectric transducers is proposed. The proposed robotic arm is composed of three arms and four joints. Each arm consists of a sandwich piezoelectric transducer and an H-shaped hollow frame. The sandwich piezoelectric transducer utilizes frictional force to drive the joints on its both sides to rotate simultaneously. The joint between two arms can be driven to rotate in two perpendicular directions by two sandwich piezoelectric transducers. The rotation of joints results in the arm motion. Utilizing the finite element method, the optimized geometrical parameters of the sandwiched piezoelectric transducer are obtained, and the operating principle is demonstrated. A prototype of the robotic arm is also fabricated and assembled, it is 573 g in weight and 412 mm in length, and the maximum rotation angle of each joint is 160°. The mechanical characteristics of the robotic arm prototype are investigated by experiments. The results indicate that, when the excitation frequency of one sandwich piezoelectric transducer is 37.4 kHz, the arms on its two sides rotate in opposite directions with an average rotational velocity of 320 deg/s at 330 V pp , a resolution of 100 μrad at 230 V pp , and a startup and shutdown response time of 40 ms and 30 ms at 230 V pp , respectively. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Modified Mode-I Cracked Sandwich Beam (CSB) Fracture Test

    Science.gov (United States)

    Smith, S. A.; Shivakumar, K. N.

    2001-01-01

    Five composite sandwich panels were fabricated using vacuum assisted resin transfer molding (VARTM). Four of these panels had E-glass/vinylester facesheets and one had carbon/epoxy facesheets. The sandwich panels had different density PVC foam cores. The four E-glass panels had core densities of 80, 100, 130, 200 kg/cu m. The sandwich with carbon/epoxy 3 facesheets had a core with density of 100 kg/cu m. Fracture tests were conducted using a modified Cracked Sandwich Beam (CSB) test configuration. Load displacement curves were obtained for loading and unloading of the specimens during crack growth. Various increments of crack growth were monitored. Critical Strain Energy Release Rates (SERR) were determined from the tests using the area method. The critical values of SERR can be considered the fracture toughness of the sandwich material. The fracture toughness ranged 367 J/sq m to 1350 J/sq m over the range of core densities. These results are compared to the Mode-I fracture toughness of the PVC foam core materials and values obtained for foam-cored sandwiches using the TSD specimen. Finite-element analyses (FEA) were performed for the test configuration and Strain Energy Release Rates were calculated using the Virtual Crack Closure Technique (VCCT). The SERR values determined from the FEA were scaled to the fracture loads, or critical loads, obtained from the modified CSB tests. These critical loads were in close agreement with the test values.

  5. Wave propagation in and sound transmission through sandwich plates

    Science.gov (United States)

    Nilsson, A. C.

    1990-04-01

    Some dynamical and acoustical properties of sandwich plates are investigated. The types of sandwich elements discussed are three-layered plates with a thick lightweight core, with thin and comparatively stiff laminates bonded to each side of the core. In the model derived it is assumed that the laminates and core are isotropic. The laminates are treated as thin plates, whereas the deflection in the core is described by means of the general field equations. This means that bending shear and rotation, as well as longitudinal deflection, are considered in the core. Wavenumbers, loss factors and apparent bending stiffness for symmetric and asymmetric plates are derived. In addition, the sound transmission loss for sandwich plates is discussed. Measured and predicted results are compared. It is found that bending stiffness and loss factor not only depend on material parameters and plate geometries but also on frequency. The core thickness is very critical for the sound transmission loss of a sandwich plate. Sandwich plates are frequently used in the shipbuilding industry for light and fast passenger vessels. The effects of a fluid load on a sandwich plate is therefore also included.

  6. Enhanced antibacterial activity of silver nanoparticles/halloysite nanotubes/graphene nanocomposites with sandwich-like structure.

    Science.gov (United States)

    Yu, Liang; Zhang, Yatao; Zhang, Bing; Liu, Jindun

    2014-04-11

    A sandwich-like antibacterial reagent (Ag/HNTs/rGO) was constructed through the direct growth of silver nanoparticles on the surface graphene-based HNTs nanosheets. Herein, various nanomaterials were combined by adhesion effect of DOPA after self-polymerization. Ag/HNTs/rGO possess enhanced antibacterial ability against E. coli and S. aureus compared with individual silver nanoparticles, rGO nanosheets or their nanocomposites.

  7. Impact damage analysis of balsawood sandwich composite materials

    Science.gov (United States)

    Abdalslam, Suof Omran

    In this study, a new composite sandwich structure with a balsa wood core (end grain and regular balsa) in conjunction with E-glass/epoxy face sheets was proposed, fabricated, impact tested, and modeled. The behavior of the sandwich structure under low velocity impact and compression after impact was investigated. Low velocity impact tests were carried out by drop-weight impact tower at different energy levels (8J-35J) to evaluate the impact response of the sandwich structure. Visual inspection, destructive and non destructive evaluation methods have been conducted. For the sandwich plate with end grain core, the damage was very clear and can be visually detected. However, the damage in regular balsa core was not clearly visible and destructive evaluation method was used. Compression testing was done after subjecting the specimens to impact testing. Impact test results; load-time, load-deflection history and energy absorption for sandwich composites with two different cores, end grain and regular balsa were compared and they were investigated at three different impact energies. The results show that the sandwich structures with end grain core are able to withstand impact loading better than the regular balsa core because the higher stiffness of end grain core informs of sustaining higher load and higher overall energy. The results obtained from compression after impact testing show that the strengths of sandwich composites with end grain and regular balsa cores were reduced about 40% and 52%, respectively, after impact. These results were presented in terms of stress-strain curves for both damaged and undamaged specimens. Finite element analysis was conducted on the sandwich composite structure using LS-DYNA code to simulate impact test. A 3- D finite element model was developed and appropriate material properties were given to each component. The computational model was developed to predict the response of sandwich composite under dynamic loading. The experimental

  8. Experimental study on mechanical properties of aircraft honeycomb sandwich structures

    Directory of Open Access Journals (Sweden)

    Talebi Mazraehshahi H.

    2010-06-01

    Full Text Available Mechanical behaviour of sandwich panels under different conditions have been exprimentally studied in this research to increase the knowledge of aircraft sandwich panel structures and facilitate design criteria for aircraft structures. Tests were concentrated on the honeycomb sandwich structures under different loads including flexural, insert shear, flat wise tension and compression loads. Furthermore, effect of core density and face material on mechanical behavior of different samples were investigated and compared with analytical and FEM method. Effects of skin thickness on strength of honycomb sandwhich panels under shear pull out and moments have also been considerd in this study. According to this investigation, insert strength and flexural test under different load conditions is strongly affected by face thickness, but compression and tearoff (falt wise tensile properties of a sandwich panel depends on core material. The study concludes that the correlation between experimental results and the analytical predictions will enable the designer to predict the mechanical behaviour and strength of a sandwich beam; however, applied formula may lead engineers to unreliable results for shear modulus.

  9. Quantum confinement in multi-nanolayer sandwich systems

    Science.gov (United States)

    Khmelinskii, Igor; Makarov, Vladimir I.

    2017-11-01

    Presently we explored quantum confinement (QC) in three-nanolayer sandwich systems, composed of Au-SnO2-Fe, Au-SnO2-Si and Au-SnO2-Ag layers. We recorded the absorption spectra of these sandwich systems, all with discrete structure. We recorded the action spectra of the photocurrent for the Au-SnO2-Fe sandwich system, with the photocurrent quantum yields increasing with the photon energy, achieving 3.1 at 4.7 × 104 cm-1. The photocurrent action spectra correlate with high accuracy with optical absorption spectra. We discuss the mechanisms determining the absorption bandwidth value, including surface imperfections, thermal distribution of the vibrational level populations in the electronic ground state, and the diabatic coupling of levels of the excited state to those of a ;dark; state. Volt-Ampere (V/A) characteristics were recorded for all three of the sandwich systems, quite similar to those of a Schottky diode. We report the parameter values of the V/A characteristics, found by fitting the experimental data with a theoretical curve. We also report charge density changes in the SnO2 layer caused by low constant voltage applied to the sandwich structure, observed as changes in the absorption band intensity.

  10. A novel method of measuring leaf epidermis and mesophyll stiffness shows the ubiquitous nature of the sandwich structure of leaf laminas in broad-leaved angiosperm species.

    Science.gov (United States)

    Onoda, Yusuke; Schieving, Feike; Anten, Niels P R

    2015-05-01

    Plant leaves commonly exhibit a thin, flat structure that facilitates a high light interception per unit mass, but may increase risks of mechanical failure when subjected to gravity, wind and herbivory as well as other stresses. Leaf laminas are composed of thin epidermis layers and thicker intervening mesophyll layers, which resemble a composite material, i.e. sandwich structure, used in engineering constructions (e.g. airplane wings) where high bending stiffness with minimum weight is important. Yet, to what extent leaf laminas are mechanically designed and behave as a sandwich structure remains unclear. To resolve this issue, we developed and applied a novel method to estimate stiffness of epidermis- and mesophyll layers without separating the layers. Across a phylogenetically diverse range of 36 angiosperm species, the estimated Young's moduli (a measure of stiffness) of mesophyll layers were much lower than those of the epidermis layers, indicating that leaf laminas behaved similarly to efficient sandwich structures. The stiffness of epidermis layers was higher in evergreen species than in deciduous species, and strongly associated with cuticle thickness. The ubiquitous nature of sandwich structures in leaves across studied species suggests that the sandwich structure has evolutionary advantages as it enables leaves to be simultaneously thin and flat, efficiently capturing light and maintaining mechanical stability under various stresses. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

  11. Improvement Noise Insulation Performance of Polycarbonate Pane using Sandwich Structure

    Science.gov (United States)

    Shen, Min; Nagamura, Kazuteru; Nakagawa, Noritoshi; Okamura, Masaharu

    Polycarbonate (PC) laminates offer the possibility of designing strong and light weight panes application in automobile. However, the noise insulation performance of PC pane is worse than glass pane because of its high rate of stiffness to low weight. In this work, a new ultra-thin(less than 10mm) sandwich pane is proposed to obtain high transmission loss(TL). The sandwich structure consists of two thin laminates plates of the same PC material and a thin lightweight damping core bonded between those plates. Then TL is predicted using decoupled equations representing symmetric and anti-symmetric motions for a sandwich PC pane. The effects of various structural and material parameters on noise insulation performance are investigated with numerical examples. Numerical results show that the shear rigidity has evident effect on coincidence frequency and proposed structure has better noise insulation properties than single layer PC pane of equivalent thickness.

  12. Identification of material properties of sandwich structure with piezoelectric patches

    Directory of Open Access Journals (Sweden)

    Zemčík R.

    2008-11-01

    Full Text Available The work focuses on light-weight sandwich structures made of carbon-epoxy skins and foam core which have unique bending stiffness compared to conventional materials. The skins are manufactured by vacuum autoclave technology from unidirectional prepregs and the sandwich is then glued together. The resulting material properties of the structure usually differ from those provided by manufacturer or even those obtained from experimental tests on separate materials, which makes computational models unreliable. Therefore, the properties are identified using the combination of experimental analysis of the sandwich with attached piezoelectric transducer and corresponding static and modal finite element analyses. Simple mathematical optimization with repetitive finite element solution is used. The model is then verified by transient analysis when the piezoelectric patch is excited by harmonic signals covering the first two eigen-frequencies and the induced oscillations are measured by laser sensor.

  13. Nanocrystalline Aluminum Truss Cores for Lightweight Sandwich Structures

    Science.gov (United States)

    Schaedler, Tobias A.; Chan, Lisa J.; Clough, Eric C.; Stilke, Morgan A.; Hundley, Jacob M.; Masur, Lawrence J.

    2017-08-01

    Substitution of conventional honeycomb composite sandwich structures with lighter alternatives has the potential to reduce the mass of future vehicles. Here we demonstrate nanocrystalline aluminum-manganese truss cores that achieve 2-4 times higher strength than aluminum alloy 5056 honeycombs of the same density. The scalable fabrication approach starts with additive manufacturing of polymer templates, followed by electrodeposition of nanocrystalline Al-Mn alloy, removal of the polymer, and facesheet integration. This facilitates curved and net-shaped sandwich structures, as well as co-curing of the facesheets, which eliminates the need for extra adhesive. The nanocrystalline Al-Mn alloy thin-film material exhibits high strength and ductility and can be converted into a three-dimensional hollow truss structure with this approach. Ultra-lightweight sandwich structures are of interest for a range of applications in aerospace, such as fairings, wings, and flaps, as well as for the automotive and sports industries.

  14. ANALISIS KERAGAAN PANEL SANDWICH UNTUK RUMAH PRA-PABRIKASI

    Directory of Open Access Journals (Sweden)

    Naresworo Nugroho

    2010-12-01

    Full Text Available In the last five years, several earthquakes struck several places in Indonesia and thousands of people died caused of their masonry house. Therefore, the idea of bamboo utilization in the form of structural sandwich panel components for anti-seismic pre-fabrication house is one of appropriate way out. This research describes the performance and behavior of engineered structure wooden-bamboo sandwich panel in full sized test. The wall frame being use were meranti wood, this frame attached by plywood as face and back, then 5 cm bamboo cutting as core; the fastener used in this study were isocyanate resin and nails. This study carried out by experimental data of full scale structural tests on shear wall (ISO 22452. These result showed that the seismic reliability of the wall frame system made of bamboo sandwich panel was appropriate and will be useful for pre-fabrication houses as anti-seismic and environment friendly residential building

  15. Damage assessment of compression loaded debond damaged sandwich panels

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Quispitupa, Amilcar

    2010-01-01

    with an implanted circular face/core debond. Compression tests were conducted on intact sandwich panels and panels with an implanted circular face/core debond with three different types of foam core materials (PVC H130, PVC H250 and PMI 51-IG). The strains and out-of-plane displacements of the debonded region were...... be minimized. Some of these applications involve the use of highly optimized sandwich solutions. Studies are under way to establish how the structural performance is influenced by the presence of production defects or in-service damage. This paper deals with the failure of compression loaded sandwich panels...... monitored using digital image correlation (DIC) measurements. Mixed mode bending (MMB) fracture characterization tests were conducted to determine the fracture toughness of the face/core interface in the panels. Finite element analysis and linear elastic fracture mechanics were employed to determine...

  16. Calculation of dynamic stresses in viscoelastic sandwich beams using oma

    DEFF Research Database (Denmark)

    Pelayo, F.; Aenlle, M. L.; Ismael, G.

    2017-01-01

    The mechanical response of sandwich elements with viscoelastic core is time and temperature dependent. Laminated glass is a sandwich element where the mechanical behavior of the glass layers is usually considered linear-elastic material whereas the core is made of an amorphous thermoplastic which...... data. In simple structures, analytical mode shapes can be used alternatively to the numerical ones. In this paper, the dynamic stresses on the glass layers of a laminated glass beam have estimated using the experimental acceleration responses measured at 7 points of the beam, and the experimental mode...

  17. Friction stir welding (FSW of aluminium foam sandwich panels

    Directory of Open Access Journals (Sweden)

    M. Bušić

    2016-07-01

    Full Text Available The article focuses on the influence of welding speed and tool tilt angle upon the mechanical properties at the friction stir welding of aluminium foam sandwich panels. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of extruded aluminium profile. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation. Ultimate tensile strength and flexural strength for three-point bending test have been determined for samples taken from the welded joints. Results have confirmed anticipated effects of independent variables.

  18. Fracture Characterization of Sandwich Face/Core Interfaces

    DEFF Research Database (Denmark)

    Manca, Marcello

    such result it is important to devise new experimental and analytical techniques to establish the multi-mode fracture characteristics of sandwich plate structures and accordingly develop methods to inhibit defect propagation. This thesis deals with characterization of fracture between face and core...... samples. A number of sandwich materials were tested (GFRP/foam cores and CFRP/Nomex) bothin static and fatigue. A linear elastic fracture mechanics model was used to determine the analyticalexpression of compliance which allowed to calculate automatically the crack length. In combination, a finite element...

  19. Sandwich-format ECL immunosensor based on Au star@BSA-Luminol nanocomposites for determination of human chorionic gonadotropin.

    Science.gov (United States)

    Zhang, Amin; Guo, Weiwei; Ke, Hong; Zhang, Xin; Zhang, Huan; Huang, Chusen; Yang, Dapeng; Jia, Nengqin; Cui, Daxiang

    2018-03-15

    A sandwich-configuration electrochemiluminescence (ECL) immunosensor based on Au star@BSA-Luminol nanocomposites for ultrasensitive determination of human chorionic gonadotropin (HCG) has been developed. In this work, nanostructured Polyaniline hydrogels (Pani) decorated with Pt nanoparticles (Pani/Pt) were utilized to construct the base of this immunosensor, greatly increasing the amount of loaded capture antibodies (Ab1) via linkage reagent glutaraldehyde (GA). The used conducting Pani/Pt nanocomposites possessed the unique features, such as large surface area, high electron transfer speed and favorable electrocatalytic activities of hydrogen peroxide, which offered a prominent platform for this sandwich-sensor and acted as efficient ECL signal amplifier also. Furthermore, we employed horseradish peroxidase (HRP) to block the nonspecific binding sites instead of commonly used bovine serum albumin (BSA), which further amplified the signal of luminol in the present of hydrogen peroxide (H2O2). In addition, Au star@BSA nanocomposites with excellent water solubility, low-toxicity and great biocompatibility were prepared and used to immobilize HCG detection antibodies (Ab2) and luminescent material luminol. Then, the above-synthetized Luminol-Au star@BSA-Ab2 complex was attached to the modified sensor by sandwiched immunoreactions. Under the optimized conditions, the proposed immunosensor exhibited a sensitive detection of HCG in a wide linear range from 0.001 to 500mIUmL-1 with a detection limit of 0.0003mIU/mL (S/N = 3). All the results indicated that such a sandwiched HCG immunosensor exhibited favorable ECL analytical performance. This developed method may be potentially used to recognize other clinical protein and display a novel ideal to construct an immunosensor. Copyright © 2017. Published by Elsevier B.V.

  20. Experimental Study on the Performance of Polyurethane-Steel Sandwich Structure under Debris Flow

    National Research Council Canada - National Science Library

    Peizhen Li; Shutong Liu; Zheng Lu

    2017-01-01

    Polyurethane-steel sandwich structure, which creatively uses the polyurethane-steel sandwich composite as a structural material, is proposed to strengthen the impact resistance of buildings under debris flow...

  1. Application of fibre reinforced plastic sandwich structures for automotive crashworthiness applications

    NARCIS (Netherlands)

    Lukaszewicz, D.; Blok, L.G.; Kratz, J.; Ward, C.; Kassapoglou, C.; Elmarakbi, A.; Araújo, A.L.

    2016-01-01

    In this work the application of fibre reinforced plastic (FRP) sandwich
    structures, with particular focus on aramid fibre tufted sandwiches is being studied for
    automotive crashworthiness applications using impact testing and numerical simulation.

  2. Mechanical testing of CFRP materials for application as skins of sandwich composites

    National Research Council Canada - National Science Library

    Adriana Stefan; Cristina-Elisabeta Pelin; George Pelin; Oleg Smorygo; Vitali Mikutski

    2017-01-01

    .... For the evaluation of sandwich composites based on metallic foam core, a larger study is being currently conducted, one of the objectives within this study being the evaluation of the sandwich system components...

  3. Simulation of Prestressed Concrete Sandwich Panels Subjected to Blast Loads (Preprint)

    Science.gov (United States)

    2010-02-01

    AFRL-RX-TY-TP-2010-0014 PREPRINT SIMULATION OF PRESTRESSED CONCRETE SANDWICH PANELS SUBJECTED TO BLAST LOADS Charles M. Newberry and...NUMBER (Include area code) 01-FEB-2010 Conference Paper PREPRINT 01-JAN-2009-- 31-DEC-2009 Simulation of Prestressed Concrete Sandwich Panels Subjected... concrete , sandwich panels, simulation, LS-DYNA, blast, tilt-up panels U U U UU 14 Paul Sheppard Reset Simulation of Prestressed Concrete Sandwich

  4. Buckling Design and Imperfection Sensitivity of Sandwich Composite Launch-Vehicle Shell Structures

    Science.gov (United States)

    Schultz, Marc R.; Sleight, David W.; Myers, David E.; Waters, W. Allen, Jr.; Chunchu, Prasad B.; Lovejoy, Andrew W.; Hilburger, Mark W.

    2016-01-01

    Composite materials are increasingly being considered and used for launch-vehicle structures. For shell structures, such as interstages, skirts, and shrouds, honeycomb-core sandwich composites are often selected for their structural efficiency. Therefore, it is becoming increasingly important to understand the structural response, including buckling, of sandwich composite shell structures. Additionally, small geometric imperfections can significantly influence the buckling response, including considerably reducing the buckling load, of shell structures. Thus, both the response of the theoretically perfect structure and the buckling imperfection sensitivity must be considered during the design of such structures. To address the latter, empirically derived design factors, called buckling knockdown factors (KDFs), were developed by NASA in the 1960s to account for this buckling imperfection sensitivity during design. However, most of the test-article designs used in the development of these recommendations are not relevant to modern launch-vehicle constructions and material systems, and in particular, no composite test articles were considered. Herein, a two-part study on composite sandwich shells to (1) examine the relationship between the buckling knockdown factor and the areal mass of optimized designs, and (2) to interrogate the imperfection sensitivity of those optimized designs is presented. Four structures from recent NASA launch-vehicle development activities are considered. First, designs optimized for both strength and stability were generated for each of these structures using design optimization software and a range of buckling knockdown factors; it was found that the designed areal masses varied by between 6.1% and 19.6% over knockdown factors ranging from 0.6 to 0.9. Next, the buckling imperfection sensitivity of the optimized designs is explored using nonlinear finite-element analysis and the as-measured shape of a large-scale composite cylindrical

  5. Stabilization of nonlinear sandwich systems via state feedback-Discrete-time systems

    NARCIS (Netherlands)

    Wang, Xu; Stoorvogel, Antonie Arij; Saberi, Ali; Grip, H°avard Fjær; Sannuti, Peddapullaiah

    A recent paper (IEEE Trans. Aut. Contr. 2010; 55(9):2156–2160) considered stabilization of a class of continuous-time nonlinear sandwich systems via state feedback. This paper is a discrete-time counterpart of it. The class of nonlinear sandwich systems consists of saturation elements sandwiched

  6. On the use of a woven mat to control the crack path in composite sandwich structures

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    In the last couple of decades the use of sandwich structures has increased tremendously in applications where low weight is of importance e.g. ship structures, where sandwich panels are often built from fiber reinforced faces and foam cores. An important damage type in sandwich structures is sepa...

  7. The Influence of Face Sheet Wrinkle Defects on the Performance of FRP Sandwich Structures

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Carl Christian; Pettersson, Robert

    2005-01-01

    reported here, the influence of wrinkle defects on the in-plane compressive strength of quasiisotropic CFRP laminates used in PVC foam-cored sandwich panels has been investigated by three approaches: testing of sandwich beam specimens in fourpoint bending, testing of sandwich panels with in...

  8. Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel

    Science.gov (United States)

    Mahapatra, Trupti R.; Mehar, Kulmani; Panda, Subrata K.; Dewangan, S.; Dash, Sushmita

    2017-02-01

    The flexural behaviour of the functionally graded sandwich spherical panel under uniform thermal environment has been investigated in the present work. The face sheets of the sandwich structure are made by the functionally graded carbon nanotube reinforced material and the core face is made by the isotropic and homogeneous material. The material properties of both the fiber and matrix are assumed to be temperature dependent. The sandwich panel model is developed in the framework of the first order shear deformation theory and the governing equation of motion is derived using the variational principle. For the discretization purpose a suitable shell element has been employed from the ANSYS library and the responses are computed using a parametric design language (APDL) coding. The performance and accuracy of the developed model has been established through the convergence and validation by comparing the obtained results with previously published results. Finally, the influence of different geometrical parameters and material properties on the flexural behaviour of the sandwich spherical panel in thermal environment has been investigated through various numerical illustrations and discussed in details.

  9. Sandwiched Between Strasbourg and Karlsruhe: EU Fundamental Rights Protection

    NARCIS (Netherlands)

    Reestman, J.H.; Besselink, L.

    2016-01-01

    Starting out from the notion of the `Verfassungsgerichtsverbund´, coined by the President Vosskuhle of the German Federal Constitutional Court, this contribution sketches the manner in which the European Court of Justice operates, sandwiched in between the European Court of Human Rights that sets a

  10. Electrowetting-driven oscillating drops sandwiched between two substrates

    NARCIS (Netherlands)

    Mampallil Augustine, Dileep; Eral, Burak; Staicu, A.D.; Mugele, Friedrich Gunther; van den Ende, Henricus T.M.

    2013-01-01

    Drops sandwiched between two substrates are often found in lab-on-chip devices based on digital microfluidics. We excite azimuthal oscillations of such drops by periodically modulating the contact line via ac electrowetting. By tuning the frequency of the applied voltage, several shape modes can be

  11. Application of Load Carrying Sandwich Elements in Wind Turbine Blades

    DEFF Research Database (Denmark)

    Jensen, Jacob Fisker; Schultz, Jacob Pagh; Berggreen, Carl Christian

    2005-01-01

    . For a single skin design, buckling is critical compared to other design criterions. By introducing sandwich, a significant weight reduction and increased buckling capacity is obtained. Tower clearance now becomes critical. Proper choice of core material and thickness is important to prevent face wrinkling...

  12. An Assessment of the Speed Reading Ability of Sandwich Students ...

    African Journals Online (AJOL)

    The paper discusses the concept and usefulness of rapid reading. It also reports a study in which the Faculty of Education, University of Lagos, Nigeria Sandwich students formed the subjects. Their pre-training reading speed and comprehension scores were determined through a pre-test, after which they were subjected to ...

  13. Factors that Influence Information Seeking Behaviour of Sandwich ...

    African Journals Online (AJOL)

    This study examined the factors that influence the information seeking behavior of sandwich students in selected Nigerian Univ ersities. Questionnaire was used to collect data with a response rate of (97.30%). Among the factors that influence information seeking is availability of internet resources in or near the library; ...

  14. Factors that Influence Information Seeking Behaviour of Sandwich ...

    African Journals Online (AJOL)

    This study examined the factors that influence the information seeking behavior of sandwich students in selected Nigerian Universities. Questionnaire was used to collect data with a response rate of (97.30%). Among the factors that influence information seeking is availability of internet resources in or near the library; ...

  15. Bending and Deformation of Sandwich Panels Due to Localized Pressure

    Directory of Open Access Journals (Sweden)

    Bambang K. Hadi

    2005-05-01

    Full Text Available Bending and deformation of sandwich panels due to localized pressure were analyzed using both Rayleigh-Ritz and finite element methods. The faces were made of laminated composite plates, while the core was a honeycomb material. Carbon fiber and glass fiber reinforced plastics were used for composite plate faces. In the case of Rayleigh-Ritz method, first the total energy of the system was calculated and then taking the variations of the total energy, the sandwich panel deflections could be computed. The deflections were assumed by means of Fourier series. A finite element code NASTRAN was exploited extensively in the finite element method. 3-dimensional 8-node brick elements were used to model sandwich panels, for both the faces sheets and the core. The results were then compared to each other and in general they are in good agreements. Dimple phenomena were found in these cases. It shows that localized pressure on sandwich structures will produce dimple on the pressurize region with little effects on the rest of the structures.

  16. A Debonded Sandwich Specimen Under Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    for the MMB specimen were derived from a superposition analysis. An experimental verification of the methodology proposed was performed using MMB sandwich specimens with H100 PVC foam core and E-glass/polyester non-crimp quadro-axial [0/45/90/-45]s DBLT-850 faces. Different mixed mode loadings were applied...

  17. Two-dimensional analysis of shallow sandwich panels

    DEFF Research Database (Denmark)

    Skvortsov, V; Bozhevolnaya, Elena

    2001-01-01

    The shallow singly curved and rectangular in-plane sandwich panels affected by lateral loads are considered. The set of governing equations on the basis of the Timoshenko-Reissner plate theory is derived for these panels in the case of general boundary conditions. Usage of any real boundary...

  18. Multiscale Finite-Element Modeling of Sandwich Honeycomb Composite Structures

    Directory of Open Access Journals (Sweden)

    Yu. I. Dimitrienko

    2014-01-01

    Full Text Available The paper presents a developed multi-scale model of sandwich honeycomb structures. The model allows us both to calculate effective elastic-strength characteristics of honeycomb and forced covering of sandwich, and to find a 3D stress-strain state of structures using the threedimensional elastic theory for non- homogeneous media. On the basis of finite element analysis it is shown, that under four-point bending the maximal value of bending and shear stresses in the sandwich honeycomb structures are realized in the zone of applied force and plate support. Here the local stress maxima approximately 2-3 times exceed the “engineering” theoretical plate values of bending and shear stresses in the middle of panel. It is established that at tests for fourpoint bending there is a failure of the honeycomb sandwich panels because of the local adhesion failure rather than because of the covering exfoliation off the honeycomb core in the middle of panel.

  19. Shear properties evaluation of a truss core of sandwich beams

    Science.gov (United States)

    Wesolowski, M.; Ludewicz, J.; Domski, J.; Zakrzewski, M.

    2017-10-01

    The open-cell cores of sandwich structures are locally bonded to the face layers by means of adhesive resin. The sandwich structures composed of different parent materials such as carbon fibre composites (laminated face layers) and metallic core (aluminium truss core) brings the need to closely analyse their adhesive connections which strength is dominated by the shear stress. The presented work considers sandwich beams subjected to the static tests in the 3-point bending with the purpose of estimation of shear properties of the truss core. The main concern is dedicated to the out-of plane shear modulus and ultimate shear stress of the aluminium truss core. The loading of the beam is provided by a static machine. For the all beams the force - deflection history is extracted by means of non-contact optical deflection measurement using PONTOS system. The mode of failure is identified for each beam with the corresponding applied force. A flexural rigidity of the sandwich beams is also discussed based on force - displacement plots.

  20. Pulsed terahertz inspection of non-conducting sandwich composites

    Science.gov (United States)

    Lopato, P.; Chady, T.

    2013-01-01

    Pulsed terahertz inspection enables accurate, contactless and safe for operating personnel evaluation of non-conducting structures. In this paper we present results of pulsed terahertz testing of various sandwich composite structures incorporating glass and basalt fibers based skin materials and spherecore and balsa wood based core materials. Various Time-Frequency Distributions (TFD) are utilized in order to obtain most valuable defects response.

  1. Compressive Behaviour and Energy Absorption of Aluminium Foam Sandwich

    Science.gov (United States)

    Endut, N. A.; Hazza, M. H. F. Al; Sidek, A. A.; Adesta, E. T. Y.; Ibrahim, N. A.

    2018-01-01

    Development of materials in automotive industries plays an important role in order to retain the safety, performance and cost. Metal foams are one of the idea to evolve new material in automotive industries since it can absorb energy when it deformed and good for crash management. Recently, new technology had been introduced to replace metallic foam by using aluminium foam sandwich (AFS) due to lightweight and high energy absorption behaviour. Therefore, this paper provides reliable data that can be used to analyze the energy absorption behaviour of aluminium foam sandwich by conducting experimental work which is compression test. Six experiments of the compression test were carried out to analyze the stress-strain relationship in terms of energy absorption behavior. The effects of input variables include varying the thickness of aluminium foam core and aluminium sheets on energy absorption behavior were evaluated comprehensively. Stress-strain relationship curves was used for energy absorption of aluminium foam sandwich calculation. The result highlights that the energy absorption of aluminium foam sandwich increases from 12.74 J to 64.42 J respectively with increasing the foam and skin thickness.

  2. Effect of microencapsulated phase change material in sandwich panels

    Energy Technology Data Exchange (ETDEWEB)

    Castellon, Cecilia; Medrano, Marc; Roca, Joan; Cabeza, Luisa F. [GREA Innovacio Concurrent, Edifici CREA, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida (Spain); Navarro, Maria E.; Fernandez, Ana I. [Departamento de Ciencias de los Materiales e Ingenieria Metalurgica, Universitat de Barcelona, Marti i Franques 1, 08028 Barcelona (Spain); Lazaro, Ana; Zalba, Belen [Instituto de Investigacion en Ingenieria de Aragon, I3A, Grupo de Ingenieria Termica y Sistemas Energeticos (GITSE), Dpto. Ingenieria Mecanica, Area de Maquinas y Motores Termicos, Universidad de Zaragoza, Campus Politecnico Rio Ebro, Edificio ' ' Agustin de Betancourt,' ' Maria de Luna s/n, 50018 Zaragoza (Spain)

    2010-10-15

    Sandwich panels are a good option as building materials, as they offer excellent characteristics in a modular system. The goal of this study was to demonstrate the feasibility of using the microencapsulated PCM (Micronal BASF) in sandwich panels to increase their thermal inertia and to reduce the energy demand of the final buildings. In this paper, to manufacture the sandwich panel with microencapsulated PCM three different methods were tested. In case 1, the PCM was added mixing the microencapsulated PCM with one of the components of the polyurethane. In the other two cases, the PCM was added either a step before (case 2) or a step after (case 3) to the addition of the polyurethane to the metal sheets. The results show that in case 1 the effect of PCM was overlapped by a possible increase in thermal conductivity, but an increase of thermal inertia was found in case 3. In case 2, different results were obtained due to the poor distribution of the PCM. Some samples showed the effect of the PCM (higher thermal inertia), and other samples results were similar to the conventional sandwich panel. In both cases (2 and 3), it is required to industrialize the process to improve the results. (author)

  3. Examination of Sandwich Materials Using Air-Coupled Ultrasonics

    DEFF Research Database (Denmark)

    Borum, K.K.; Berggreen, Carl Christian

    2004-01-01

    The air-coupled ultrasonic techniques have been improved drastically in recent years. Better equipment has made this technique much more useful. This paper focuses on the examination of sandwich materials used in naval ships. It is more convenient to be able to make the measurements directly...

  4. Outcome of the TURP-TUVP sandwich procedure for minimally ...

    African Journals Online (AJOL)

    Bladder neck stenosis occurred in 3 patients and was successfully treated with bladder neck incision. Conclusions: The sandwich combination of TURP and TUVP for the surgical treatment of BPH with volume larger than 40cc had satisfactory patient safety profile and resulted in significant improvement in IPSS, Qmax and ...

  5. Enhanced detection levels in a semi-automated sandwich ...

    African Journals Online (AJOL)

    A peptide nucleic acid (PNA) signal probe was tested as a replacement for a typical DNA oligonucleotidebased signal probe in a semi-automated sandwich hybridisation assay designed to detect the harmful phytoplankton species Alexandrium tamarense. The PNA probe yielded consistently higher fluorescent signal ...

  6. Residual Strength of In-plane Loaded Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Simonsen, Bo Cerup

    2005-01-01

    This paper presents a FEM based numerical model for prediction of residual strength of damaged sandwich panels. As demonstrated, the model can predict the maximum load carrying capacity of real-life panels with debond damages, where the failure is governed by face-sheet buckling followed by debond...

  7. Design and Testing of Sandwich Structures with Different Core Materials

    Directory of Open Access Journals (Sweden)

    Henrik HERRANEN

    2012-03-01

    Full Text Available The purpose of this study was to design a light-weight sandwich panel for trailers. Strength calculations and selection of different materials were carried out in order to find a new solution for this specific application. The sandwich materials were fabricated using vacuum infusion technology. The different types of sandwich composite panels were tested in 4-point bending conditions according to ASTM C393/C393M. Virtual testing was performed by use of ANSYS software to simplify the core material selection process and to design the layers. 2D Finite element analysis (FEA of 4-point bending was made with ANSYS APDL (Classic software. Data for the FEA was obtained from the tensile tests of glass fiber plastic (GFRP laminates. Virtual 2D results were compared with real 4-point bending tests.  3D FEA was applied to virtually test the selected sandwich structure in real working conditions. Based on FEA results the Pareto optimality concept has been applied and optimal solutions determined.DOI: http://dx.doi.org/10.5755/j01.ms.18.1.1340

  8. Residual Strength of In-plane Loaded Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Nøkkentved, Alexandros; Berggreen, Carl Christian

    2005-01-01

    Face/core debond damaged sandwich panels exposed to uniform and non-uniform compression loads are studied experimentally. The panel geometry is full-scale rectangular with a centrally located circular prefabricated debond. The results show a considerable strength reduction with increasing debond...

  9. Compression Response of a Sandwich Fuselage Keel Panel With and Without Damage

    Science.gov (United States)

    McGowan, David M.; Ambur, Damodar R.

    1997-01-01

    Results are presented from an experimental and analytical study of a sandwich fuselage keel panel with and without damage. The fuselage keel panel is constructed of graphite-epoxy skins bonded to a honeycomb core, and is representative of a highly loaded fuselage keel structure. The face sheets of the panel contain several terminated or dropped plies along the length of the panel. The results presented provide a better understanding of the load distribution in damaged and undamaged thick-face-sheet composite sandwich structure with dropped plies and of the failure mechanisms of such structure in the presence of low-speed impact damage and discrete-source damage. The impact-damage condition studied corresponds to barely visible impact damage (BVID), and the discrete-source damage condition studied is a notch machined through both face sheets. Results are presented from an impact-damage screening study conducted on another panel of the same design to determine the impact energy necessary to inflict BVID on the panel. Results are presented from compression tests of the panel in three conditions: undamaged; BVID in two locations; and BVID in two locations and a notch through both face sheets. Surface strains in the face sheets of the undamaged panel and the notched panel obtained experimentally are compared with finite element analysis results. The experimental and analytical results suggest that for the damage conditions studied, discrete-source damage influences the structural performance more than BVID.

  10. The Rightful Demise of the Sh*t Sandwich: Providing Effective Feedback.

    Science.gov (United States)

    James, Ian Andrew

    2015-11-01

    As a trainee cognitive therapist in the early 1990s, I was taught the Sh*t Sandwich by my supervisor. I continued to use this technique for many years without seeing the need to extend my repertoire of feedback strategies. This article describes a number of other feedback techniques, raising awareness of the processes underpinning feedback, and facilitating reflection on feedback methods. This review examines feedback and the methods of feedback used to improve clinical competence. Evidence informs us that the use of good feedback has a significant effect on learners' outcomes (Milne, 2009). However, despite recognition of its importance, many supervisors fail to give adequate feedback and utilize methods that are sub-optimal. One such problematic method is the notorious "Sh*t Sandwich" (SS), which attempts to hide criticism within a cushion of two positive statements. This paper looks at various models of giving negative and positive feedback, suggesting that our repertoire of feedback methods may require expanding. The review suggests that feedback is a complex process and methods that place an emphasis on the learner as an active participant in the learning process (i.e. interactive approaches) should be encouraged. The paper suggests that negative feedback should generally be avoided in favour of constructive support, accompanied by specific, descriptive, balanced feedback, with new learning being consolidated by role play. Generally, feedback should be given about the task rather than the person, but when it is personalized it should relate to effort rather than ability.

  11. Ageing tests study on wood-based sandwich panels

    Directory of Open Access Journals (Sweden)

    Mateo, Raquel

    2011-12-01

    Full Text Available Composite lightweight wood panels are being increasingly used in construction in Spain. Their growing use should be accompanied by necessary guarantees based on studies of their properties. As it is prescriptive and in addition to others tests, in the present work is examinated the durability of these panels when exposed to the climatic conditions, a characteristic of great importance for wood products, according to Guide ETAG 016, the current standard defining the ageing tests to be used. However, due to the use class of this material, there are indications that the testing outlined in this Guide is inappropriate for assessing the ageing of wood-based sandwich panels. Alternative tests are here proposed that recreate rather better the real conditions under which these products are used. Covering the samples in a waterproof sheeting permeable to the outward movement of water vapour, which is in fact used in the installation, provided the best procedure for testing these panels.

    Los paneles sándwich de madera son un producto de creciente aplicación en la edificación de nuestro país. Este ascendente uso del material debe estar acompañado de las garantías necesarias avaladas por un estudio previo de sus prestaciones. Como es preceptivo y entre otros, se evalúa su durabilidad frente a las condiciones climatológicas, clave en los productos derivados de la madera, acorde a la normativa actual definida con tal fin, la Guía ETAG 016. Sin embargo, debido a la clase de uso del material, se ha detectado que dicha normativa tal y como está concebida no es capaz de valorar su envejecimiento adecuadamente. En este trabajo se proponen ensayos alternativos al establecido tras exhaustivos análisis que recrean las condiciones reales de uso y más acordes a los productos de madera. Se concluye que la incorporación de una lámina impermeable pero permeable al vapor de agua hacia el exterior, como las utilizadas en el montaje, aportan el mejor

  12. Elastic stability of superplastically formed/diffusion-bonded orthogonally corrugated core sandwich plates

    Science.gov (United States)

    Ko, W. L.

    1980-01-01

    The paper concerns the elastic buckling behavior of a newly developed superplastically formed/diffusion-bonded (SPF/DB) orthogonally corrugated core sandwich plate. Uniaxial buckling loads were calculated for this type of sandwich plate with simply supported edges by using orthotropic sandwich plate theory. The buckling behavior of this sandwich plate was then compared with that of an SPF/DB unidirectionally corrugated core sandwich plate under conditions of equal structural density. It was found that the buckling load for the former was considerably higher than that of the latter.

  13. The Planar Sandwich and Other 1D Planar Heat Flow Test Problems in ExactPack

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-24

    This report documents the implementation of several related 1D heat flow problems in the verification package ExactPack [1]. In particular, the planar sandwich class defined in Ref. [2], as well as the classes PlanarSandwichHot, PlanarSandwichHalf, and other generalizations of the planar sandwich problem, are defined and documented here. A rather general treatment of 1D heat flow is presented, whose main results have been implemented in the class Rod1D. All planar sandwich classes are derived from the parent class Rod1D.

  14. Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1993-01-01

    Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

  15. A novel self-assembled sandwich nanomedicine for NIR-responsive release of NO.

    Science.gov (United States)

    Fan, Jing; He, Nongyue; He, Qianjun; Liu, Yi; Ma, Ying; Fu, Xiao; Liu, Yijing; Huang, Peng; Chen, Xiaoyuan

    2015-12-21

    A novel sandwich nanomedicine (GO-BNN6) for near-infrared (NIR) light responsive release of nitric oxide (NO) has been constructed by self-assembly of graphene oxide (GO) nanosheets and a NO donor BNN6 through the π-π stacking interaction. The GO-BNN6 nanomedicine has an extraordinarily high drug loading capacity (1.2 mg BNN6 per mg GO), good thermal stability, and high NIR responsiveness. The NO release from GO-BNN6 can be easily triggered and effectively controlled by adjusting the switching, irradiation time and power density of NIR laser. The intracellular NIR-responsive release of NO from the GO-BNN6 nanomedicine causes a remarkable anti-cancer effect.

  16. Novel self-assembled sandwich nanomedicine for NIR-responsive release of NO

    Science.gov (United States)

    Fan, Jing; He, Qianjun; Liu, Yi; Ma, Ying; Fu, Xiao; Liu, Yijing; Huang, Peng; He, Nongyue; Chen, Xiaoyuan

    2015-01-01

    A novel sandwich nanomedicine (GO-BNN6) for near-infrared (NIR) light responsive release of nitric oxide (NO) has been constructed by self-assembling of graphene oxide (GO) nanosheets and a NO donor BNN6 through the π-π stacking interaction. GO-BNN6 nanomedicine has an extraordinarily high drug loading capacity (1.2 mg BNN6 per mg GO), good thermal stability, and high NIR responsiveness. The NO release from GO-BNN6 can be easily triggered and effectively controlled by adjusting the switching, irradiation time and power density of NIR laser. The intracellular NIR-responsive release of NO from GO-BNN6 nanomedicine causes a remarkable anti-cancer effect. PMID:26568270

  17. Visual distraction and visuo-spatial memory: a sandwich effect.

    Science.gov (United States)

    Tremblay, Sébastien; Nicholls, Alastair P; Parmentier, Fabrice B R; Jones, Dylan M

    2005-01-01

    The functional characteristics of visuo-spatial serial memory and its sensitivity to irrelevant visual information are examined in the present study, through the investigation of the sandwich effect (e.g., Hitch, 1975). The memory task was one of serial recall for the position of a sequence of seven spatially and temporally separated dots. The presence of irrelevant dots interpolated with to-be-remembered dots affected performance over most serial positions (Experiment 1) but that effect was significantly reduced when the interpolated dots were distinct from the to-be-remembered dots by colour and shape (Experiment 2). Parallels are made between verbal and spatial serial memory, and the reduction of the sandwich effect is discussed in terms of the contribution of perceptual organisation and attentional factors in short-term memory.

  18. Non-Uniform Compressive Strength of Debonded Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Simonsen, Bo Cerup

    2005-01-01

    This article describes the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core of the theoretical method is a newly developed procedure for prediction of the propagation of a face-core debond. As demonstra......This article describes the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core of the theoretical method is a newly developed procedure for prediction of the propagation of a face-core debond.......(2005)., shows that the model is indeed able to predict the failure modes and the residual strength of damaged panels with accuracy sufficient for practical applications. This opens up for a number of important engineering applications, for example risk-based inspection and repair schemes....

  19. Residual Strength Prediction of Debond Damaged Sandwich Panels

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian

    propagation and initiation, as these mechanisms are governing for the overall failure load of the structure. Thus, this presentation will describe the development, validation and application of a FEM based numerical model for prediction of residual strength of damaged sandwich panels. The core......This presentation concerns theoretical and experimental prediction of crack propagation and residual strength of debond damaged sandwich panels. It is evident that in order to achieve highly optimised structures which are able to operate in a stochastic loading environment, damage tolerance...... evaluation based on residual strength prediction is needed. Is a given damage critical for the structural integrity needing immanent repair, or is the damage negligible, where repair can be postponed to the next inspection? These questions are generally interesting for all types of structures...

  20. Mixed-Mode Delamination Failure Model of Sandwich Plate

    OpenAIRE

    Kormanikova, Eva

    2015-01-01

    Plane fracture of two plies is defined as delamination that can be found between plies in a laminate or sandwich structure. The interface model is solved using fracture and contact mechanics. Within the standard First-Order Deformation Theory of laminates, the mixed-mode delamination failure model is solved. The damage propagation parameters are calculated using the ANSYS code. The delamination problem is solved in a numerical example.

  1. Astronaut Edwin Aldrin makes sandwich in zero gravity conditions

    Science.gov (United States)

    1969-01-01

    Astronaut Edwin E. Aldrin Jr., Apollo 11 lunar module pilot, makes a sandwich in zero gravity conditions in this color reproduction taken from at TV transmission from the Apollo 11 spacecraft during its transearth journey home from the moon. When this picture was made, Apollo 11 was approximately 157,000 nautical miles from earth, traveling at a speed of about 4,300 feet per second.

  2. Catalytic application of two novel sandwich-type polyoxometalates ...

    Indian Academy of Sciences (India)

    on open-access literatures on the use of the sandwich- type polyoxometalates as catalyst in the synthesis of. 14-aryl or alkyl-14H-dibenzo[a, j]xanthenes. In this study, an attempt was made to explain a facile and efficient synthetic strategy for synthesis of 14-aryl or alkyl-14H-dibenzo[a, j]xanthenes using one-pot con-.

  3. Assesment risk of fracture in thin-walled fiber reinforced and regular High Performance Concretes sandwich elements

    DEFF Research Database (Denmark)

    Hodicky, Kamil; Hulin, Thomas; Schmidt, Jacob Wittrup

    2013-01-01

    High Performance Concrete Sandwich Elements (HPCSE) are an interesting option for future low or plus energy building construction. Recent research and development work, however, indicate that such elements are prone to structural cracking due to the combined effect of shrinkage and high temperature...... Performance Concretes (HPC). The research work described in this paper contains a description of experimental setup that allows measurement of effective shrinkage in HPC, which develops on an elastic inhomogeneity embedded in HPC matrix undergoing shrinkage during hydration (autogenous shrinkage). The test...

  4. Data characterizing compressive properties of Al/Al2O3 syntactic foam core metal matrix sandwich

    Directory of Open Access Journals (Sweden)

    Mohammed Yaseer Omar

    2015-12-01

    Full Text Available Microstructural observations and compressive property datasets of metal matrix syntactic foam core sandwich composite at quasi-static and high strain rate (HSR conditions (525–845 s−1 are provided. The data supplied in this article includes sample preparation procedure prior to scanning electron and optical microscopy as well as the micrographs. The data used to construct the stress–strain curves and the derived compressive properties of all specimens in both quasi-static and HSR regions are included. Videos of quasi-static compressive failure and that obtained by a high speed image acquisition system during deformation and failure of HSR specimen are also included.

  5. A novel double antibody sandwich-lateral flow immunoassay for the rapid and simple detection of hepatitis C virus

    OpenAIRE

    XIANG, TINGXIU; JIANG, ZHENG; ZHENG, JIAN; LO, CHAOYU; TSOU, HARRY; REN, GUOSHENG; ZHANG, JUN; HUANG, AILONG; LAI, GUOQI

    2012-01-01

    The objective of this study was to screen for antigens of the hepatitis C virus (HCV) to establish a new double antibody sandwich-lateral flow immunoassay (DAS-LFIA) method for testing the presence of anti-HCV antibodies in human serum or plasma. A series of different recombinant HCV proteins in Escherichia coli cells were constructed, expressed, purified and the new DAS-LFIA strip was developed. The sensitivity and specificity of new the DAS-LFIA strip were evaluated by detecting 23 HCV-posi...

  6. Delamination during drilling in polyurethane foam composite sandwich structures

    Science.gov (United States)

    Sharma, S. C.; Krishna, M.; Narasimha Murthy, H. N.

    2006-06-01

    The objective of this paper is to study the influence of drilling velocity, feed rate, and flank length on the delamination of polyurethane foam sandwich structures. A Taguchi-based design of experiments was used to assess the importance of the drilling parameters, and scanning electron microscopy (SEM) was used to assess the damage from drilling. The drilling of sandwich structures results in significant damage caused by delamination and surface roughness around the drilled holes. The drilling process was evaluated based on a factor called the delamination factor, which is defined as the ratio of the maximum diameter of the damage zone, measured using SEM, to the standard hole diameter (drill diameter). Analysis of variance of the experimental results showed that cutting speed was the most significant parameter among the controllable parameters during drilling of sandwich specimens followed by flank length and feed rate. Finally, confirmation tests were performed to make a comparison between the experimental results and the correlation results. The damage mechanisms are explained using SEM.

  7. Sandwich-structured hollow fiber membranes for osmotic power generation

    KAUST Repository

    Fu, Feng Jiang

    2015-11-01

    In this work, a novel sandwich-structured hollow fiber membrane has been developed via a specially designed spinneret and optimized spinning conditions. With this specially designed spinneret, the outer layer, which is the most crucial part of the sandwich-structured membrane, is maintained the same as the traditional dual-layer membrane. The inner substrate layer is separated into two layers: (1) an ultra-thin middle layer comprising a high molecular weight polyvinylpyrrolidone (PVP) additive to enhance integration with the outer polybenzimidazole (PBI) selective layer, and (2) an inner-layer to provide strong mechanical strength for the membrane. Experimental results show that a high water permeability and good mechanical strength could be achieved without the expensive post treatment process to remove PVP which was necessary for the dual-layer pressure retarded osmosis (PRO) membranes. By optimizing the composition, the membrane shows a maximum power density of 6.23W/m2 at a hydraulic pressure of 22.0bar when 1M NaCl and 10mM NaCl are used as the draw and feed solutions, respectively. To our best knowledge, this is the best phase inversion hollow fiber membrane with an outer selective PBI layer for osmotic power generation. In addition, this is the first work that shows how to fabricate sandwich-structured hollow fiber membranes for various applications. © 2015 Elsevier B.V.

  8. Microtomography with a sandwich detector for mouse bone imaging

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Kim, Junwoo; Kim, Ho Kyung [Pusan National University, Busan (Korea, Republic of); Youn, Hanbean; Jeon, Hosang [Pusan National University Yangsan Hospital, Yangsan (Korea, Republic of)

    2015-10-15

    Single-shot dual-energy imaging, using sandwich detector, the rear detector usually uses a thicker x-ray converter to enhance quantum efficiency with the higher-energy spectrum, hence providing a blurrier image than the front detector. The weighted logarithmic subtraction of the two images therefore results in a form of unsharp masking that enhances edges in the resultant image. Inspired by this observation, we have developed a micro computed tomography (micro-CT) system with the sandwich detector for high-resolution bone imaging of small animals. The sandwich detector consists of two flat-panel detectors by stacking one upon the other. Although the x-ray beam continuously irradiates, the step-rotation of an object and stay-readout of projection data were considered for the scanning and data gathering. It will be necessary that more elaborate experiments with the mouse and/or other quantitative phantoms. And quantification of the image quality of bone-enhanced images in comparisons with the conventional images will be performed. The image analysis of differences between bone-enhanced images obtained from the projection- and image-based approaches can be performed.

  9. Impact properties of aluminium - glass fiber reinforced plastics sandwich panels

    Directory of Open Access Journals (Sweden)

    Mathivanan Periasamy

    2012-06-01

    Full Text Available Aluminium - glass fiber reinforced plastics (GFRP sandwich panels are hybrid laminates consisting of GFRP bonded with thin aluminum sheets on either side. Such sandwich materials are increasingly used in airplane and automobile structures. Laminates with varying aluminium thickness fractions, fiber volume fractions and orientation in the layers of GFRP were fabricated by hand lay up method and evaluated for their impact performance by conducting drop weight tests under low velocity impacts. The impact energy required for initiating a crack in the outer aluminium layer as well as the energy required for perforation was recorded. The impact load-time history was also recorded to understand the failure behavior. The damage depth and the damage area were measured to evaluate the impact resistance. Optical photography and scanning electron micrographs were taken to visualize the crack and the damage zone. The bidirectional cross-ply hybrid laminate (CPHL has been found to exhibit better impact performance and damage resistance than the unidirectional hybrid laminate (UDHL. Increase in aluminium thickness fraction (Al tf and fiber volume fraction (Vf resulted in an increase in the impact energy required for cracking and perforation. On an overall basis, the sandwich panels exhibited better impact performance than the monolithic aluminium.

  10. Investigations on the influences of elastic foundations on the aerothermoelastic flutter and thermal buckling properties of lattice sandwich panels in supersonic airflow

    Science.gov (United States)

    Chai, Yu-Yang; Song, Zhi-Guang; Li, Feng-Ming

    2017-11-01

    The lattice sandwich panels supported on elastic mediums are often applied in the construction of aerospace structures because of the low specific weight, excellent bending rigidity and outstanding vibration properties. This elastic medium can be any spring materials including damping tapes or heat shields which are attached to one side of the sandwich panel. Therefore, in this paper, aerothermoelastic flutter and thermal buckling characteristics of sandwich panels with the pyramidal lattice core resting on elastic foundations in supersonic airflow are studied. The influences of geometrical parameters and elastic foundation on the panel flutter and thermal buckling of the structures are analyzed in detail. In the structural modeling, the first-order shear deformation theory is applied, and the effective material properties of the lattice core are used. The aerodynamic pressure is evaluated by the supersonic piston theory. Hamilton's principle and the assumed modes method are applied to formulate the equation of motion. The highlight point of this investigation is that an effective thermal buckling suppression method utilizing the elastic foundation is proposed, based on which the thermal buckling of the structure can be completely eliminated with the natural frequencies remaining unchanged when the shearing layer parameter is equal to the thermal load. Through the numerical results, the influences of the elastic foundation, aspect ratio, core-to-facesheet thickness ratio, and inclination angle of the core truss on the aerothermoelastic behaviors of the lattice sandwich panel are analyzed, and the thermal buckling elimination effects are also examined.

  11. Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Aneta Krzyżak

    2016-01-01

    Full Text Available Sandwich panels are composites which consist of two thin laminate outer skins and lightweight (e.g., honeycomb thick core structure. Owing to the core structure, such composites are distinguished by stiffness. Despite the thickness of the core, sandwich composites are light and have a relatively high flexural strength. These composites have a spatial structure, which affects good thermal insulator properties. Sandwich panels are used in aeronautics, road vehicles, ships, and civil engineering. The mechanical properties of these composites are directly dependent on the properties of sandwich components and method of manufacturing. The paper presents some aspects of technology and its influence on mechanical properties of sandwich structure polymer composites. The sandwiches described in the paper were made by three different methods: hand lay-up, press method, and autoclave use. The samples of sandwiches were tested for failure caused by impact load. Sandwiches prepared in the same way were used for structural analysis of adhesive layer between panels and core. The results of research showed that the method of manufacturing, more precisely the pressure while forming sandwich panels, influences some mechanical properties of sandwich structured polymer composites such as flexural strength, impact strength, and compressive strength.

  12. Formulation et mise en oeuvre d’un élément continu de plaque sandwich et de plaque multicouche

    OpenAIRE

    Ghorbel, Olfa

    2016-01-01

    This thesis deals with the development of a continuous element for orthotropic, sandwich and multilayer plates. This approach is based essentially on the construction of the dynamic stiffness matrix of orthotropic plates using natural boundary conditions from a reformulation of the isotropic plate elements developed in the QUARTZ laboratory (EA 7393). In order to develop the dynamic stiffness matrix of the studied element we resort on the first hand to the decomposition of free boundary condi...

  13. Vibration Characteristics Determined for Stainless Steel Sandwich Panels With a Metal Foam Core for Lightweight Fan Blade Design

    Science.gov (United States)

    Ghosn, Louis J.; Min, James B.; Raj, Sai V.; Lerch, Bradley A.; Holland, Frederic A., Jr.

    2004-01-01

    The goal of this project at the NASA Glenn Research Center is to provide fan materials that are safer, weigh less, and cost less than the currently used titanium alloy or polymer matrix composite fans. The proposed material system is a sandwich fan construction made up of thin solid face sheets and a lightweight metal foam core. The stiffness of the sandwich structure is increased by separating the two face sheets by the foam layer. The resulting structure has a high stiffness and lighter weight in comparison to the solid facesheet material alone. The face sheets carry the applied in-plane and bending loads (ref. 1). The metal foam core must resist the transverse shear and transverse normal loads, as well as keep the facings supported and working as a single unit. Metal foams have ranges of mechanical properties, such as light weight, impact resistance, and vibration suppression (ref. 2), which makes them more suitable for use in lightweight fan structures. Metal foams have been available for decades (refs. 3 and 4), but the difficulties in the original processes and high costs have prevented their widespread use. However, advances in production techniques and cost reduction have created a new interest in this class of materials (ref. 5). The material chosen for the face sheet and the metal foam for this study was the aerospace-grade stainless steel 17-4PH. This steel was chosen because of its attractive mechanical properties and the ease with which it can be made through the powder metallurgy process (ref. 6). The advantages of a metal foam core, in comparison to a typical honeycomb core, are material isotropy and the ease of forming complex geometries, such as fan blades. A section of a 17-4PH sandwich structure is shown in the following photograph. Part of process of designing any blade is to determine the natural frequencies of the particular blade shape. A designer needs to predict the resonance frequencies of a new blade design to properly identify a useful

  14. Finite element simulation of low velocity impact loading on a sandwich composite

    OpenAIRE

    Vishwas M.; Joladarashi Sharnappa; Kulkarni Satyabodh M.

    2018-01-01

    Sandwich structure offer more advantage in bringing flexural stiffness and energy absorption capabilities in the application of automobile and aerospace components. This paper presents comparison study and analysis of two types of composite sandwich structures, one having Jute Epoxy skins with rubber core and the other having Glass Epoxy skins with rubber core subjected to low velocity normal impact loading. The behaviour of sandwich structure with various parameters such as energy absorption...

  15. Effects of Subzero Temperatures and Sea Water Immersion on Damage Initiation and Growth in Sandwich Composites

    Science.gov (United States)

    2008-12-10

    single cantilever beam sandwich test. The TSD is perhaps 19 An improved methodology for measuring the interracial toughness of sandwich beams 3...measuring the interracial toughness of sandwich beams 5 Table 4.1. Material properties Glass face Glass face Carbon „ , ,, Loading L...which shows the relationship between reaction forces for an MSCB specimen with 12 ply glass face sheets at different crack lengths. It is observed

  16. Synthesis and characterization of a 1D chain-like Cu{sub 6} substituted sandwich-type phosphotungstate with pendant dinuclear Cu–azido complexes

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yan-Ying [MOE Key Laboratory of Cluster Science, School of Chemistry, Beijing Institute of Technology, Beijing 100081 (China); Zhao, Jun-Wei, E-mail: zhaojunwei@henu.edu.cn [Henan Key Laboratory of Polyoxometalate Chemistry, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China); Wei, Qi [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Yang, Bai-Feng [MOE Key Laboratory of Cluster Science, School of Chemistry, Beijing Institute of Technology, Beijing 100081 (China); Yang, Guo-Yu, E-mail: ygy@bit.edu.cn [MOE Key Laboratory of Cluster Science, School of Chemistry, Beijing Institute of Technology, Beijing 100081 (China); State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China)

    2014-02-15

    A novel Cu–azido complex modified hexa-Cu{sup II} substituted sandwich-type phosphotungstate [Cu(en){sub 2}]([Cu{sub 2}(en){sub 2}(μ-1,1-N{sub 3}){sub 2}(H{sub 2}O)]{sub 2}[Cu{sub 6}(en){sub 2}(H{sub 2}O){sub 2}(B-α-PW{sub 9}O{sub 34}){sub 2}])·6H{sub 2}O (1) (en=ethylene-diamine) has been prepared under hydrothermal conditions and structurally characterized by elemental analyses, IR spectra, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. 1 displays a beautiful 1-D chain architecture constructed from sandwich-type [Cu{sub 2}(en){sub 2}(μ-1,1-N{sub 3}){sub 2}(H{sub 2}O)]{sub 2}[Cu{sub 6}(en){sub 2}(H{sub 2}O){sub 2}(B-α-PW{sub 9}O{sub 34}){sub 2}]{sup 2−} units and [Cu(en){sub 2}]{sup 2+} linkers. To our knowledge, 1 represents the first hexa-Cu{sup II} sandwiched phosphotungstate with supporting Cu–azido complexes. - Graphical abstract: The first hexa-Cu{sup II} sandwiched phosphotungstate with supporting Cu–azido complexes has been prepared and characterized. Display Omitted - Highlights: • Hexa-copper-substituted phosphotungstate. • Cu–azido complexes modified hexa-Cu{sup II} substituted sandwich-type polyoxometalate. • 1-D chain architecture built by hexa-copper-substituted polyoxotungstate units.

  17. Performance of Pre-Stressed Sandwich Composites Subjected to Shock Wave Loading

    Directory of Open Access Journals (Sweden)

    Shukla A.

    2010-06-01

    Full Text Available The present paper experimentally studies the dynamic behaviour of prestressed sandwich composites under blast loading. The in-plane static compression loadings are implemented on the sandwich composites before they are subjected to the transverse shock wave loading. Three different pre-stress levels are chosen. 3-D realtime deformation data are captured by two high-speed photography systems: a backview Digital Image Correlation (DIC system and a side-view camera system. The results show that pre-stresses can induce local buckling in the front face-sheet of sandwich composites, consequently reduce the blast resistance of sandwich composites.

  18. Stable high-order molecular sandwiches: Hydrocarbon polyanion pairs with multiple lithium ions inside and out

    Energy Technology Data Exchange (ETDEWEB)

    Ayalon, A.; Rabinovitz, M. (Hebrew Univ. of Jerusalem (Israel)); Sygula, A.; Rabideau, P.W. (Louisiana State Univ., Baton Rouge, LA (United States)); Cheng, P.C.; Scott, L.T. (Boston College, Chestnut Hill, MA (United States))

    1994-08-19

    Stable ten-component sandwich compounds have been characterized in which four lithium ions reside between two tetraanions derived from corannulene or its alkyl-substituted derivatives and four additional lithium ions decorate the exterior. In tetrahydrofuran solution, the four lithium ions inside the sandwich can exchange environments with the four external lithium atoms, but the two tetraanion decks of the sandwich never separate from one another on the time scale of nuclear magnetic resonance. Theoretical calculations point to a [open quotes]stacked bowl[close quotes] conformation and a low energy barrier for synchronous double inversion of the tetraanion bowls in the solvated sandwich compounds.

  19. REKAYASA BAHAN KOMPOSIT SANDWICH HIBRID UNTUK STRUKTUR SISTEM PANEL

    Directory of Open Access Journals (Sweden)

    Agus Hariyanto

    2017-04-01

    Full Text Available Tujuan penelitian ini adalah menyelidiki pengaruh ketebalan core terhadap peningkatan kekuatan bending komposit sandwich hibrid berpenguat kombinasi serat rami woven dan serat gelas woven bermatrix polyester dengan core berpenguat kombinasi serbuk kayu jati dan mahoni bermatrix polyester. Mekanisme perpatahan diamati dengan foto makro. Bahan yang digunakan untuk skin adalah serat rami (woven, serat E-Glass (woven, resin unsaturated polyester 157 BQTN (UPRs. Bahan yang digunakan untuk core adalah serbuk kayu jati dan mahoni dengan mesh 30 pada fraksi volume 50%, resin unsaturated polyester 157 BQTN. Hardener yang digunakan adalah MEKPO dengan konsentrasi 1%. Komposit dibuat dengan metode cetak tekan. Komposit  sandwich  hibrid tersusun  terdiri  dari dua skin komposit hibrid dengan core hibrid di tengahnya. Skin komposit hibrid sebagai lamina terdiri  dari dua lamina serat gelas anyam dan satu lamina serat rami (woven - woven – woven. Fraksi volume serat komposit skin hibrid adalah 30%. Komposit core hibrid yang digunakan adalah serbuk kayu jati dan mahoni dengan mesh 30 pada fraksi volume 50% dengan resin unsaturated polyester 157 BQTN. Variabel utama penelitian yaitu tebal core (10, 20, 30, 40, dan 50 mm. Spesimen dan prosedur pengujian bending mengacu pada standard ASTM C 393. Hasil penelitian menunjukkan bahwa penambahan ketebalan core mampu meningkatkan momen bending. Namun, menurunkan kekuatan bending, facing bending dan tegangan geser core komposit sandwich hibrid. Mekanisme patahan diawali oleh kegagalan komposit skin bagian tarik, core gagal geser, dan diakhiri oleh kegagalan skin sisi tekan. Pada bagian daerah batas core dan komposit skin menunjukkan adanya kegagalan delaminasi.

  20. Lightweight composites for modular panelized construction

    Science.gov (United States)

    Vaidya, Amol S.

    Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction

  1. Water intrusion in thin-skinned composite honeycomb sandwich structures

    Science.gov (United States)

    Jackson, Wade C.; O'Brien, T. Kevin

    1988-01-01

    Thin-skinned composite honeycomb sandwich structures from the trailing edge of the U.S. Army's Apache and Chinook helicopters have been tested to ascertain their susceptibility to water intrusion as well as such intrusions' effects on impact damage and cyclic loading. Minimum-impact and fatigue conditions were determined which would create microcracks sufficiently large to allow the passage of water through the skins; damage sufficient for this to occur was for some skins undetectable under a 40X-magnification optical microscope. Flow rate was a function of moisture content, damage, applied strain, and pressure differences.

  2. Devices, systems, and methods for conducting sandwich assays using sedimentation

    Science.gov (United States)

    Schaff, Ulrich Y; Sommer, Gregory J; Singh, Anup K; Hatch, Anson V

    2015-02-03

    Embodiments of the present invention are directed toward devices, systems, and method for conducting sandwich assays using sedimentation. In one example, a method includes generating complexes on a plurality of beads in a fluid sample, individual ones of the complexes comprising a capture agent, a target analyte, and a labeling agent. The plurality of beads including the complexes may be transported through a density media, wherein the density media has a density lower than a density of the beads and higher than a density of the fluid sample, and wherein the transporting occurs, at least in part, by sedimentation. Signal may be detected from the labeling agents of the complexes.

  3. FINITE ELEMENT MODELING OF THIN CIRCULAR SANDWICH PLATES DEFLECTION

    Directory of Open Access Journals (Sweden)

    K. S. Kurachka

    2014-01-01

    Full Text Available A mathematical model of a thin circular sandwich plate being under the vertical load is proposed. The model employs the finite element method and takes advantage of an axisymmetric finite element that leads to the small dimension of the resulting stiffness matrix and sufficient accuracy for practical calculations. The analytical expressions for computing local stiffness matrices are found, which can significantly speed up the process of forming the global stiffness matrix and increase the accuracy of calculations. A software is under development and verification. The discrepancy between the results of the mathematical model and those of analytical formulas for homogeneous thin circularsandwich plates does not exceed 7%.

  4. Deformation and fracture of impulsively loaded sandwich panels

    Science.gov (United States)

    Wadley, H. N. G.; Børvik, T.; Olovsson, L.; Wetzel, J. J.; Dharmasena, K. P.; Hopperstad, O. S.; Deshpande, V. S.; Hutchinson, J. W.

    2013-02-01

    Light metal sandwich panel structures with cellular cores have attracted interest for multifunctional applications which exploit their high bend strength and impact energy absorption. This concept has been explored here using a model 6061-T6 aluminum alloy system fabricated by friction stir weld joining extruded sandwich panels with a triangular corrugated core. Micro-hardness and miniature tensile coupon testing revealed that friction stir welding reduced the strength and ductility in the welds and a narrow heat affected zone on either side of the weld by approximately 30%. Square, edge clamped sandwich panels and solid plates of equal mass per unit area were subjected to localized impulsive loading by the impact of explosively accelerated, water saturated, sand shells. The hydrodynamic load and impulse applied by the sand were gradually increased by reducing the stand-off distance between the test charge and panel surfaces. The sandwich panels suffered global bending and stretching, and localized core crushing. As the pressure applied by the sand increased, face sheet fracture by a combination of tensile stretching and shear-off occurred first at the two clamped edges of the panels that were parallel with the corrugation and weld direction. The plane of these fractures always lay within the heat affected zone of the longitudinal welds. For the most intensively loaded panels additional cracks occurred at the other clamped boundaries and in the center of the panel. To investigate the dynamic deformation and fracture processes, a particle-based method has been used to simulate the impulsive loading of the panels. This has been combined with a finite element analysis utilizing a modified Johnson-Cook constitutive relation and a Cockcroft-Latham fracture criterion that accounted for local variation in material properties. The fully coupled simulation approach enabled the relationships between the soil-explosive test charge design, panel geometry, spatially varying

  5. Two types of novel tetra-iron substituted sandwich-type arsenotungastates with supporting lanthanide pendants.

    Science.gov (United States)

    Chen, Lijuan; Zhang, Fang; Ma, Xing; Luo, Jie; Zhao, Junwei

    2015-07-28

    Two classes of novel tetra-iron substituted sandwich-type arsenotungastates (ATs) with supporting lanthanide (Ln) pendants KNa2 [Ln(H2O)7][Fe4(H2O)10(B-β-AsW9O33)2]·21H2O [Ln = La(III) (1), Pr(III) (2), Nd(III) ()3, Sm(III) (4)] and [Ln(H2O)8]2[Fe4(H2O)8(l-thr)2(B-β-AsW9O33)2]·20H2O [Ln = La(III) (5), Pr(III) ()6, Nd(III) (7), Sm(III) (8), Eu(III) (9), Gd(III) (10), Tb(III) (11), Dy(III) (12), Er(III) (13)] (l-thr = l-threonine) have been synthesized by the hydrothermal reaction of the [As2W19O67(H2O)](14-) precursor with Fe(3+) cations and Ln(3+) cations in the presence of l-thr or l-leucine and l-alanine, and further characterized by elemental analyses, IR spectra and single-crystal X-ray diffraction. Structural analyses indicate that 1-4 display the inorganic 2-D sheet architecture constructed from tetra-iron sandwiched AT [Fe4(H2O)10(B-β-AsW9O33)2](6-) fragments by bridging [Ln(H2O)7](3+) cations whereas the molecular structures of the isostructural 5-13 consist of an organic-inorganic hybrid tetra-iron substituted sandwich-type AT [Fe4(H2O)8(l-thr)2(B-β-AsW9O33)2](6-) fragment and two pendant [Ln(H2O)8](3+) cations. As far as we know, 1-4 represent the rare inorganic 2-D extended ATs based on transition-metal substituted sandwich-type polyoxometalate units and Ln linkers and 5-13 are the first Fe-Ln heterometallic ATs with amino acid ligands. The solid state photoluminescence (PL) measurements of 9 and 11 have been performed at room temperature. The PL emission of 9 is mainly derived from the characteristic (5)D0 → (7)F2 (J = 4-0) transitions of the Eu(III) cations whereas the PL behavior of 11 stems from the common contribution of the (5)D4 → (7)FJ (J = 5-3) transitions of the Tb(III) ions and oxygen-to-metal (O → W) charge-transfer transitions of AT segments. The thermogravimetric (TG) analyses of 1-4 and 6-12 have been investigated.

  6. Measurement of shear strength resistance in flexion test on PUR sandwich panels: analysis of difficulties and finite element method simulation

    Directory of Open Access Journals (Sweden)

    J. M. Chillón Moreno

    2017-09-01

    Full Text Available The use of the composite construction elements combining different materials with complementary characteristics, it has spread increasingly. The sandwich panels composed by external metallic sheets that they contributes resistance and core of rigid insulating thermal foam, that provides qualities that improve the thermal comfort inside all kinds of constructions. They are in use in closings and covers that shape the surrounding one of the buildings. Of the different quality controls to which they have to surrender. In this article one proposes an improvement to the indicated one in the procedure for the determination of the resistance to the shear strength, Managing to avoid many anomalous results obtained by the utilization of rigid plates in the supports. Finally, so much the problem observed as the proposed solution, they are modeled and simulate by means of the method of finite elements.

  7. Foam-injected sandwich panels with continuous-reinforced facings

    Science.gov (United States)

    Menrath, A.; Henning, F.; Huber, T.; Roch, A.; Riess, C.

    2014-05-01

    Thermoplastic foam injection molding (FIM) in combination with insert molding (IM) offers a possibility to generate sandwich panels in a one-step process. The prepared face sheets are first positioned inside the mold. A preheating process is carried out using quartz infrared emitters, which are mounted on a linear robot, before the mold is closed. The injection of the gas/melt mixture is combined with an embossing of the mold to further improve the face-core-adhesion. Finally, to initiate the foaming process, adjust the extent of foaming of the core and achieve the desired component dimensions, a mold opening stroke is carried out. The process described was performed with different facing materials, layer dimensions and overall wall thicknesses. Drawn PP fabrics (Curv®) as well as PP/GF70 tapes and consolidated sheets (unidirectional) were used to generate sandwich panels in a range of 5 to 6.4 mm thickness. PP was also chosen to form the foamed core which, in combination with the Curv® face sheets, produces a fully recyclable self-reinforced polymer (SRP) composite. Detailed process descriptions and the results of bending tests demonstrate the high potential. Other focuses are the preheating process and the foam structure.

  8. Flow Cytometric Bead Sandwich Assay Based on a Split Aptamer.

    Science.gov (United States)

    Shen, Luyao; Bing, Tao; Liu, Xiangjun; Wang, Junyan; Wang, Linlin; Zhang, Nan; Shangguan, Dihua

    2018-01-24

    A few aptamers still bind their targets after being split into two moieties. Split aptamers have shown great potential in the development of aptameric sensors. However, only a few split aptamers have been generated because of lack of knowledge on the binding structure of their parent aptamers. Here, we report the design of a new split aptamer and a flow cytometric bead sandwich assay using a split aptamer instead of double antibodies. Through DMS footprinting and mutation assay, we figured out the target-binding moiety and the structure-stabilizing moiety of the l-selectin aptamer, Sgc-3b. By separating the duplex strand in the structure-stabilizing moiety, we obtained a split aptamer that bound l-selectin. After optimization of one part of the split sequence to eliminate the nonspecific binding of the split sequence pair, we developed a split-aptamer-based cytometric bead assay (SACBA) for the detection of soluble l-selectin. SACBA showed good sensitivity and selectivity to l-selectin and was successfully applied for the detection of spiked l-selectin in the human serum. The strategies for generating split aptamers and designing the split-aptamer-based sandwich assay are simple and efficient and show good practicability in aptamer engineering.

  9. Improving Performance of Polymer Fiber Reinforced Sandwich X-Joints in Naval Vessels

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Karlsen, Kasper

    2007-01-01

    This study deals with damage tolerance of sandwich X-joints with embedded debond damages between face and core. The study is conducted both through modeling and full-scale tests. Mixed mode cohesive laws from the opening of sandwich interfaces are determined experimentally from a DCB specimen loa...

  10. Robust and Air-Stable Sandwiched Organo-Lead Halide Perovskites for Photodetector Applications

    KAUST Repository

    Mohammed, Omar F.

    2016-02-25

    We report the simplest possible method to date for fabricating robust, air-stable, sandwiched perovskite photodetectors. Our proposed sandwiched structure is devoid of electron or hole transporting layers and also the expensive electrodes. These simpler architectures may have application in the perovskite-only class of solar cells scaling up towards commercialization.

  11. Laser welded steel sandwich panel bridge deck development : finite element analysis and stake weld strength tests.

    Science.gov (United States)

    2009-09-01

    This report summarizes the analysis of laser welded steel sandwich panels for use in bridge structures and : static testing of laser stake welded lap shear coupons. Steel sandwich panels consist of two face sheets : connected by a relatively low-dens...

  12. The Effect of Face Sheet Wrinkle Defects on the Strength of FRP Sandwich Structures

    DEFF Research Database (Denmark)

    Hayman, Brian; Berggreen, Christian; Pettersson, Robert

    2007-01-01

    . In the studies reported here, the influence of wrinkle defects on the in-plane compressive strength of quasi-isotropic carbon fiber reinforced plastic (CFRP) laminates used in PVC foam-cored sandwich panels has been investigated by three approaches: testing of sandwich beam specimens in four-point bending...

  13. Failure Investigation of Debonded Sandwich Columns: An Experimental and Numerical Study

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Carlsson, Leif A.

    2009-01-01

    Failure of compression loaded sandwich columns with an implanted through-width face/core debond is examined. Compression tests were conducted on sandwich columns containing implemented face/core debonds. The strains and out-of-plane displacements of the debonded region were monitored using the di...

  14. Experimental validation of the Higher-Order Theory approach for sandwich panels with flexible core materials

    NARCIS (Netherlands)

    Straalen, IJ.J. van

    2000-01-01

    During tthe 1990's the higher-order theory was developed by Frostig to enable detailed stress analyses of sandwich panel structures. To investigate the potentials of this approach experiments are performed on sandwich panels made of thin steel faces and mineral wool or polystyrene core material. A

  15. Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

    Science.gov (United States)

    Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

    2012-01-01

    Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

  16. High renewable content sandwich structures based on flax-basalt hybrids and biobased epoxy polymers

    Science.gov (United States)

    Colomina, S.; Boronat, T.; Fenollar, O.; Sánchez-Nacher, L.; Balart, R.

    2014-05-01

    In the last years, a growing interest in the development of high environmental efficiency materials has been detected and this situation is more accentuated in the field of polymers and polymer composites. In this work, green composite sandwich structures with high renewable content have been developed with core cork materials. The base resin for composites was a biobased epoxy resin derived from epoxidized vegetable oils. Hybrid basalt-flax fabrics have been used as reinforcements for composites and the influence of the stacking sequence has been evaluated in order to optimize the appropriate laminate structure for the sandwich bases. Core cork materials with different thickness have been used to evaluate performance of sandwich structures thus leading to high renewable content composite sandwich structures. Results show that position of basalt fabrics plays a key role in flexural fracture of sandwich structures due to differences in stiffness between flax and basalt fibers.

  17. REKAYASA DAN MANUFAKTUR KOMPOSIT SANDWICH HIBRID UNTUK PANEL

    Directory of Open Access Journals (Sweden)

    Agus Hariyanto

    2017-10-01

    Full Text Available Tujuan  penelitian  ini  adalah  menyelidiki  pengaruh  fraksi  volume  core  terhadap peningkatan kekuatan Impak komposit sandwich hibrid berpenguat kombinasi serat rami  woven  dan  serat  gelas  woven  bermatrix  polyester  dengan  core  berpenguat kombinasi serbuk kayu jati dan mahoni bermatrix polyester. Mekanisme perpatahan diamati dengan foto makro.Bahan yang digunakan untuk skin adalah serat rami (woven, serat E-Glass (woven, resin  unsaturated  polyester  157  BQTN  (UPRs.  Bahan  yang  digunakan  untuk  core adalah serbuk kayu jati dan mahoni dengan mesh 30 pada fraksi volume 30%, 40%, dan 50%, resin unsaturated polyester 157 BQTN. Hardener yang digunakan adalah MEKPO  dengan  konsentrasi  1%.  Komposit  dibuat  dengan  metode  cetak  tekan. Komposit  sandwich  hibrid tersusun  terdiri  dari dua skin komposit hibrid dengan core hibrid ditengahnya. Skin komposit hibrid sebagai lamina terdiri  dari dua lamina serat gelas anyam dan satu lamina serat rami (woven - woven – woven. Fraksi volume serat komposit skin hibrid adalah 30%. Komposit core hibrid yang digunakan adalah serbuk kayu jati dan mahoni dengan mesh 30 pada fraksi volume 30%, 40%, dan 50% dengan resin unsaturated polyester 157 BQTN. Variabel utama penelitian yaitu fraksi volume core (30%, 40%, dan 50%. Spesimen dan prosedur pengujian Impak mengacu pada standard ASTM D 5942. Hasil  penelitian  menunjukkan  bahwa  penambahan  fraksi  volume  core  mampu meningkatkan energi serap dan kekuatan impak komposit sandwich hibrid. Mekanisme patahan  diawali  oleh  kegagalan  komposit  skin  bagian  tarik,  core  gagal  geser,  dan diakhiri oleh kegagalan skin sisi tekan. Pada bagian daerah batas core dan komposit skin menunjukkan adanya kegagalan delaminasi.

  18. Thermal properties of a sandwich construction insulated with Polyurethane (DC-System)

    DEFF Research Database (Denmark)

    Jensen, Rasmus Lund; Dreau, Jerome Le

    conductivity: + 50% for expanded polystyrene (λ ≈ 30 mW/m.K), + 75% for mineral wools (λ ≈ 35 mW/m.K), etc. Despite its low thermal conductivity, polyurethane foam (PUR) is not much used as insulation material for walls because of its low resistance to fire. The most common PUR boards are classified C-s2-d0...

  19. Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This test method covers the determination of the relative amount of water absorption by various types of structural core materials when immersed or in a high relative humidity environment. This test method is intended to apply to only structural core materials; honeycomb, foam, and balsa wood. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  20. Ocean Engineering Studies Compiled 1991. Volume 8. Pressure Hulls - Cellular Sandwich Construction

    Science.gov (United States)

    1991-01-01

    Trilling, Windenburg. Don- ing of the tubes to their elastic-stability limits nello and Tokugawa performed many experiments and presented no stimulus for...687-698; Vol. 26, September 1913, pp. 502-511; Vol. 29, January 1915, pp. 67-77. Tokugawa , T., "Model Experiments on the Elastic Stability of Closed

  1. Two-dimensional sandwich-like Ag coated silicon-graphene-silicon nanostructures for superior lithium storage

    Science.gov (United States)

    Yao, Weiqi; Cui, Yansu; Zhan, Liang; Chen, Feng; Zhang, Yongzheng; Wang, Yanli; Song, Yan

    2017-12-01

    Two-dimensional (2D) sandwich-like Ag coated silicon-graphene-silicon (Ag@Si-rGO-Si) nanosheets are designed and synthesized as a novel anode material for superior lithium storage. The mesoporous Si nanofilm grows tightly on the two sides of reduced graphene oxide (rGO), and Ag nanoparticles with a size of 10-50 nm are further coated on the surface of porous Si nanofilm. Such unique features not only provide a short pathway for rapid Li+ diffusion and electron transportation, but also can act as a buffering effect to effectively inhibit the huge volume expansion of pure Si during the repeated lithiation/delithiation process. Meanwhile, a conductive network is constructed by the embedded graphene coupled with Ag nanoparticles to overcome the shortage of pure Si with low electrical conductivity. The resultant 2D sandwich-like Ag@Si-rGO-Si electrode exhibits a high reversible capability (1382 mAh g-1 at 0.1 A g-1 after 100 cycles), long cycle stability (952 mAh g-1 at 1 A g-1 after 500 cycles) and excellent high-rate performance (863 mAh g-1 at 2 A g-1, 565 mAh g-1 at 5 A g-1).

  2. Electrowetting-driven oscillating drops sandwiched between two substrates

    Science.gov (United States)

    Mampallil, Dileep; Burak Eral, H.; Staicu, Adrian; Mugele, Frieder; van den Ende, Dirk

    2013-11-01

    Drops sandwiched between two substrates are often found in lab-on-chip devices based on digital microfluidics. We excite azimuthal oscillations of such drops by periodically modulating the contact line via ac electrowetting. By tuning the frequency of the applied voltage, several shape modes can be selected one by one. The frequency of the oscillations is half the frequency of the contact angle modulation by electrowetting, indicating a parametric excitation. The drop response to sinusoidal driving deviates substantially from sinusoidal behavior in a “stop and go” fashion. Although our simple theoretical model describes the observed behavior qualitatively, the resonances appear at lower frequencies than expected. Moreover, the oscillations produce a nonperiodic fluid transport within the drop with a typical velocity of 1 mm/s. In digital microfluidic devices, where the typical drop size is less than 1 mm, this flow can result in very fast mixing on the spot.

  3. Morphology Analysis of Cu Film Fractures in Sandwiched Methylmethacrylate Plates

    Directory of Open Access Journals (Sweden)

    Cristiano Fidani

    2015-06-01

    Full Text Available Thin films of Cu were evaporated on solid plates of polymethylmethacrylate (PMMA. A polymerization process was made to realize sandwiched structure to protect the Cu films. Fracturing of the metal film surface was observed with several morphologies showing two different fracture systems. Surface film morphology was analysed in terms of the distribution area of the islands and contour fractal dimension. The island areas showed a maximum corresponding to 42 nm of the Cu thickness, it was also the threshold to observe the second fracture system. The fractures pattern resulted to be scale invariant with fractal dimensions between 1.55 and 1.7. The minimum fractal dimension also occurred at the film thickness corresponding to the maximum island area. The reported effects can be understood on the basis of different thermal expansion coefficients of the two materials and their thermally induced adhesion.DOI: http://dx.doi.org/10.5755/j01.ms.21.2.6518

  4. Mechanical properties and experimental researches of new CSIPs sandwich panels

    Directory of Open Access Journals (Sweden)

    Du Wenfeng

    2017-01-01

    Full Text Available The advantages of glass fiber reinforced composites (FRP and SIPs (structural insulated panels are combined, and a new type of sandwich panel called composite structural insulated panels (CSIPs is proposed. Through the adhesive bonding, CSIPs are made of FRP as face sheets and expanded polyethylene foam (EPS as a core. To master the mechanical characteristics of CSIPs, firstly, adopting the large deflection theory of Reissener in this paper derived the calculation formula of displacement and the stability critical load of CSIPs. Then, ANSYS software was used to carry on the analysis of finite element simulation. Finally, a testing piece of CSIP with length 1000mm and breath 1000mm was made and a test was done. The results show that the theoretical analysis results, finite element simulation results and test results are basically coincide. So the calculating formula of deformation and bearing capacity of CSIPs are correct. And CSIPs have the outstanding advantages of light weight and high strength.

  5. Combined compressive and shear buckling analysis of hypersonic aircraft sandwich panels

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1992-01-01

    The combined-load (compression and shear) buckling equations were established for orthotropic sandwich panels by using the Rayleigh-Ritz method to minimize the panel total potential energy. The resulting combined-load buckling equations were used to generate buckling interaction curves for super-plastically-formed/diffusion-bonded titanium truss-core sandwich panels and titanium honeycomb-core sandwich panels having the same specific weight. The relative combined-load buckling strengths of these two types of sandwich panels are compared with consideration of their sandwich orientations. For square and nearly square panels of both types, the combined load always induces symmetric buckling. As the panel aspect ratios increase, antisymmetric buckling will show up when the loading is shear-dominated combined loading. The square panel (either type) has the highest combined buckling strength, but the combined load buckling strength drops sharply as the panel aspect ratio increases. For square panels, the truss-core sandwich panel has higher compression-dominated load buckling strength. However, for shear dominated loading, the square honeycomb-core sandwich panel has higher shear-dominated combined load buckling strength.

  6. Combined compressive and shear buckling analysis of hypersonic aircraft structural sandwich panels

    Science.gov (United States)

    Ko, William L.; Jackson, Raymond H.

    1991-01-01

    The combined-load (compression and shear) buckling equations were established for orthotropic sandwich panels by using the Rayleigh-Ritz method to minimize the panel total potential energy. The resulting combined-load buckling equations were used to generate buckling interaction curves for super-plastically-formed/diffusion-bonded titanium truss-core sandwich panels and titanium honeycomb-core sandwich panels having the same specific weight. The relative combined-load buckling strengths of these two types of sandwich panels are compared with consideration of their sandwich orientations. For square and nearly square panels of both types, the combined load always induces symmetric buckling. As the panel aspect ratios increase, antisymmetric buckling will show up when the loading is shear-dominated combined loading. The square panel (either type) has the highest combined buckling strength, but the combined load buckling strength drops sharply as the panel aspect ratio increases. For square panels, the truss-core sandwich panel has higher compression-dominated combined load buckling strength. However, for shear dominated loading, the square honeycomb-core sandwich panel has higher shear-dominated combined load buckling strength.

  7. Localization of Transversal Cracks in Sandwich Beams and Evaluation of Their Severity

    Directory of Open Access Journals (Sweden)

    G. R. Gillich

    2014-01-01

    Full Text Available An algorithm to assess transversal cracks in composite structures based on natural frequency changes due to damage is proposed. The damage assessment is performed in two steps; first the crack location is found, and afterwards an evaluation of its severity is performed. The technique is based on a mathematical relation that provides the exact solution for the frequency changes of bending vibration modes, considering two terms. The first term is related to the strain energy stored in the beam, while the second term considers the increase of flexibility due to damage. Thus, it is possible to separate the problems of localization and severity assessment, which makes the localization process independent of the beams cross-section shape and boundary conditions. In fact, the process consists of comparing vectors representing the measured frequency shifts with patterns constructed using the mode shape curvatures of the undamaged beam. Once the damage is localized, the evaluation of its severity is made taking into account the global rigidity reduction. The damage identification algorithm was validated by experiments performed on numerous sandwich panel specimens.

  8. Sandwiched confinement of quantum dots in graphene matrix for efficient electron transfer and photocurrent production

    Science.gov (United States)

    Zhu, Nan; Zheng, Kaibo; Karki, Khadga J.; Abdellah, Mohamed; Zhu, Qiushi; Carlson, Stefan; Haase, Dörthe; Žídek, Karel; Ulstrup, Jens; Canton, Sophie E.; Pullerits, Tõnu; Chi, Qijin

    2015-05-01

    Quantum dots (QDs) and graphene are both promising materials for the development of new-generation optoelectronic devices. Towards this end, synergic assembly of these two building blocks is a key step but remains a challenge. Here, we show a one-step strategy for organizing QDs in a graphene matrix via interfacial self-assembly, leading to the formation of sandwiched hybrid QD-graphene nanofilms. We have explored structural features, electron transfer kinetics and photocurrent generation capacity of such hybrid nanofilms using a wide variety of advanced techniques. Graphene nanosheets interlink QDs and significantly improve electronic coupling, resulting in fast electron transfer from photoexcited QDs to graphene with a rate constant of 1.3 × 109 s-1. Efficient electron transfer dramatically enhances photocurrent generation in a liquid-junction QD-sensitized solar cell where the hybrid nanofilm acts as a photoanode. We thereby demonstrate a cost-effective method to construct large-area QD-graphene hybrid nanofilms with straightforward scale-up potential for optoelectronic applications.

  9. Validation of a digital photographic method for assessment of dietary quality of school lunch sandwiches brought from home

    DEFF Research Database (Denmark)

    Sabinsky, Marianne S; Toft, Ulla; Andersen, Klaus Kaae

    2013-01-01

    intake from school lunch sandwiches brought from home among children aged 7-13 years. DESIGN: School lunch sandwiches (n=191) were prepared to represent randomly selected school lunch sandwiches from a large database. All components were weighed to provide an objective measure of the composition...... and the Meal IQ obtained from the digital images were validated against the objective weighed foods of the school lunch sandwiches. To determine interrater reliability, the digital images were evaluated by a second image analyst. RESULTS: Correlation coefficients between the DPM and the weighed foods ranged...... and reliable method for assessing the dietary quality of school lunch sandwiches brought from home....

  10. Modelling of Debond and Crack Propagation in Sandwich Structures Using Fracture and Damage Mechanics

    DEFF Research Database (Denmark)

    Berggreen, C.; Simonsen, Bo Cerup; Toernqvist, Rikard

    2003-01-01

    Skin-core de-bonding or core crack propagation will often be dominating mechanisms in the collapse modes of sandwich structures. This paper presents two different methods for prediction of crack propagation in a sandwich structure: a fracture mechanics approach, where a new mode-mix method...... is presented, and a local damage mechanics approach. The paper presents a real-life application example, where the superstructure in a vessel pulls the skin off the sandwich deck. The calculations show almost unstable crack growth initially followed by a stabilization, and a nearly linear relation between...

  11. A comparative study of the impact properties of sandwich materials with different cores

    Science.gov (United States)

    Ramakrishnan, K. R.; Shankar, K.; Viot, P.; Guerard, S.

    2012-08-01

    Sandwich panels are made of two high strength skins bonded to either side of a light weight core and are used in applications where high stiffness combined with low structural weight is required. The purpose of this paper is to compare the mechanical response of several sandwich panels whose core materials are different. Sandwich panels with glass fibre-reinforced polymer face sheets were used, combined with five different cores; polystyrene foam, polypropylene honeycomb, two different density Balsa wood and Cork. All specimens were subjected to low velocity impact and their structural response (Force-displacement curves) were compared to quasistatic response of the panel tested using an hemispherical indenter.

  12. A comparative study of the impact properties of sandwich materials with different cores

    Directory of Open Access Journals (Sweden)

    Viot P.

    2012-08-01

    Full Text Available Sandwich panels are made of two high strength skins bonded to either side of a light weight core and are used in applications where high stiffness combined with low structural weight is required. The purpose of this paper is to compare the mechanical response of several sandwich panels whose core materials are different. Sandwich panels with glass fibre-reinforced polymer face sheets were used, combined with five different cores; polystyrene foam, polypropylene honeycomb, two different density Balsa wood and Cork. All specimens were subjected to low velocity impact and their structural response (Force-displacement curves were compared to quasistatic response of the panel tested using an hemispherical indenter.

  13. Fabrication and Characterization of Li-6 Sandwich Detector

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Kiwhan [Future and Challenge Technology Co., Yongin (Korea, Republic of); Iliev, Metodi; Ianakiev, Kiril; Swinhoe, Martyn [Los Alamos National Laboratory, New Mexico (United States)

    2014-10-15

    Lithium-6 has been used as a radiation detector material for its ability to react with thermal neutrons, producing alphas and tritons as the primary charged particles during the neutron conversion reaction. Lithium-6 has a thermal neutron cross section of 940 barns, producing a 2.05 MeV alpha particle and a 2.73 MeV triton in a back to back symmetry to conserve energy and momentum, if the incident thermal neutron has low energy. The most widely recognized thermal neutron conversion reaction involves He-3. A He-3 atom has a thermal neutron cross section of 5330 barns, but its resulting particles have total 0.764 MeV to share between a proton and triton. The use of He-3 gas is not limited to homeland security and international safe-guards programs; the high energy physics and medical communities all benefit from the unique capabilities of He-3. As fission neutrons enter the sandwich medium consisting of light guides, plastic scintillator, and lithium-6 foil, they lose energy in the volume. Some neutrons are reduced to thermal energy range and interact with lithium-6 atoms, producing a triton and an alpha particle during the reaction. The primary charged particles then impart their energies in the plastic scintillator film, producing photons. The photons then travels toward the ends of the light guide strips and get collected by the PMTs. Initially, the lithium-6 metal was in storage for many years at the Y-12 National Security Complex, Oak Ridge, Tenneessee, and the metal piece needed reprocessing as shown in Fig. 3. The piece was transported to a lithium battery production facility which had the capability to reprocess lithium ingots. After the metal was reprocessed, it was purified to 95% enrichment and regained sheen (Fig. 4). The foil was extruded as 50-micron, 5 cm-wide strips as shown in inset of Fig. 4. The rolls were stored in an airtight pouch which was filled with dry argon and sealed in a metal container capable of withstanding long term storage as shown

  14. Utilization of bagasse and coconut fibers waste as fillers of sandwich composite for bridge railway sleepers

    Science.gov (United States)

    Soehardjo, K. A.; Basuki, A.

    2017-07-01

    The bridge railway sleepers is an essential component in the construction of railways, as the foundation of the rail support in order to withstand the load a train that runs above it. Sleepers used in bridge construction are expected to have a longer service life, lighter weight and durable so that can be used more efficient. This research was carried out to create a model of bridges railway sleepers made of sandwich structured composite from fiber glass, epoxy resin with fillers waste of bagasse (sugar cane pulp mill) or coconut fiberboard (copra industry) that using polyurethane as an adhesive. The process of making was conditioned for small and medium industrial applications. Railway sleepers’ specifications adapted to meet the requirements of end user. The process steps in this research include; lay-up fiberglass combined with bagasse/coconut fiberboard (as fillers), gluing with epoxy resin, molded it with pressure to be solid, curing after solidification process. The specimens of composite, bagasse and coconut fiber board were tested for tensile and compressive strength. The prototype were tested of mechanical test: flexural moment test to the stand rail, flexural moment test to the middle of the sleepers and tensile strength test on one side of the sleepers, in accordance to SNI 11-3388-1994 Method testing of single block concrete sleepers and bearing single rail fastening systems. The results of mechanical testing all variations meet the technical specifications of end user such as test results for flexural moment on all prototypes, after load test, there is no visible crack. While in the tensile strength test, it seem the prototype with coconut fiberboard filler, shows better performance than bagasse fiberboard filler, the decisions is just depended on techno economic and lifetime.

  15. Damage behavior of honeycomb sandwich structure under low-energy impact

    Directory of Open Access Journals (Sweden)

    Cheng Jialin

    2017-01-01

    Full Text Available Honeycomb sandwich structure is widely used in aircrafts and ships to absorb impact energy. Damage caused by low-energy impact is difficult to investigate, but will significantly reduce the strength of the sandwich structure. This paper presented a systematical experimental study on the damage behavior of honeycomb sandwich structure under different configurations. Drop weight tests were carried out to investigate the effect of impact energy, core material and face plate structure on the dynamic response of sandwich plate. Delamination regions were obtained through ultrasonic scanning. Conclusions were made that the damage behavior of the face plate was similar with composite laminates while the energy absorption capacity was related to the parameters of the honeycomb core and the mismatch angle of the face plate.

  16. Vibroacoustic optimization of anti-tetrachiral and auxetic hexagonal sandwich panels with gradient geometry

    Science.gov (United States)

    Ranjbar, Mostafa; Boldrin, Luca; Scarpa, Fabrizio; Neild, Simon; Patsias, Sophoclis

    2016-05-01

    The work describes the vibroacoustic behavior of anti-tetrachiral and auxetic hexagonal gradient sandwich panels using homogenized finite element models to determine the mechanical properties of the auxetic structures, the natural frequencies and radiated sound power level of sandwich panels made by the auxetic cores. The mechanical properties and the vibroacoustic behavior of auxetic hexagonal sandwich panels are investigated as a benchmark. The radiated sound power level of the structure over the frequency range of 0-1000 Hz is minimized by modifying the core geometry of the gradient auxetic sandwich panels. Several excitation cases are considered. First-order and random optimization methods are used for the minimization of radiated sound power level of the structures. The results of this study present significant insights into the design of auxetic structures with respect to their vibroacoustical properties.

  17. Investigation of out of plane compressive strength of 3D printed sandwich composites

    Science.gov (United States)

    Dikshit, V.; Yap, Y. L.; Goh, G. D.; Yang, H.; Lim, J. C.; Qi, X.; Yeong, W. Y.; Wei, J.

    2016-07-01

    In this study, the 3D printing technique was utilized to manufacture the sandwich composites. Composite filament fabrication based 3D printer was used to print the face-sheet, and inkjet 3D printer was used to print the sandwich core structure. This work aims to study the compressive failure of the sandwich structure manufactured by using these two manufacturing techniques. Two different types of core structures were investigated with the same type of face-sheet configuration. The core structures were printed using photopolymer, while the face-sheet was made using nylon/glass. The out-of-plane compressive strength of the 3D printed sandwich composite structure has been examined in accordance with ASTM standards C365/C365-M and presented in this paper.

  18. Effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2017-01-01

    Full Text Available Sandwich structure is an attractive alternative that increasingly used in the transportation and aerospace industry. Corrugated-core with trapezoidal shape allows enhancing the damage resistance to the sandwich structure, but on the other hand, it changes the structural response of the sandwich structure. The aim of this paper is to study the effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure under compression loading. The corrugated-core specimen was fabricated using press technique, following the shape of trapezoidal shape. Two different materials were used in the study, glass fibre reinforced plastic (GFRP and carbon fibre reinforced plastic (CFRP. The result shows that the mechanical properties of the core in compression loading are sensitive to the variation of a number of unit cells and the core thickness.

  19. Novel sandwich structure adsorptive membranes for removal of 4-nitrotoluene from water

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yuexin [College of Chemistry, Beijing Normal University, Beijing 100875 (China); School of Pharmacy, North China University of Science and Technology, Tangshan 063000 (China); Jia, Zhiqian, E-mail: zhqjia@bnu.edu.cn [College of Chemistry, Beijing Normal University, Beijing 100875 (China)

    2016-11-05

    Highlights: • Novel sandwich PES-SPES/PS-PDVB/PTFE adsorptive membranes were prepared. • The removal efficiency for 4-nitrotoluene is greater than 95% after five recycles. • The membrane showed higher adsorption capacity than that of mixed matrix membrane. - Abstract: Novel sandwich PES-SPES/PS-PDVB/PTFE adsorptive membranes were prepared by a filtration/immersion precipitation method and employed for the removal of 4-nitrotoluene from water. The static adsorption thermodynamics, kinetics, dynamic adsorption/desorption and membrane reusability were investigated. The results showed that the Freundlich model describes the adsorption isotherm satisfactorily. With increased PS-PDVB content, the maximum static adsorption capacity, partition coefficient, apparent adsorption rate constant, and dynamic adsorption capacity all significantly increased. The sandwich membranes showed much higher removal efficiency and adsorption capacity than those of mixed matrix membranes. With respect to dynamics adsorption/desorption, the sandwich membranes exhibited excellent reusability, with a removal efficiency greater than 95% even after five recycles.

  20. Experimental and Theoretical Deflections of Hybrid Composite Sandwich Panel under Four-point Bending Load

    Directory of Open Access Journals (Sweden)

    Jauhar Fajrin

    2017-03-01

    Full Text Available This paper presents a comparison of theoretical and experimental deflection of a hybrid sandwich panel under four-point bending load. The paper initially presents few basic equations developed under three-point load, followed by development of model under four-point bending load and a comparative analysis between theoretical and experimental results. It was found that the proposed model for predicting the deflection of hybrid sandwich panels provided fair agreement with the experimental values. Most of the sandwich panels showed theoretical deflection values higher than the experimental values, which is desirable in the design. It was also noticed that the introduction of intermediate layer does not contribute much to reduce the deflection of sandwich panel as the main contributor for the total deflection was the shear deformation of the core that mostly determined by the geometric of the samples and the thickness of the core.

  1. Two dimensional dynamic analysis of sandwich plates with gradient foam cores

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Lin; Xiao, Deng Bao; Zhao, Guiping [State Key Laboratory for Mechanical structure Strength and Vibration, School of AerospaceXi' an Jiaotong University, Xi' an (China); Cho, Chong Du [Dept. of Mechanical Engineering, Inha University, Inchon (Korea, Republic of)

    2016-09-15

    Present investigation is concerned about dynamic response of composite sandwich plates with the functionally gradient foam cores under time-dependent impulse. The analysis is based on a model of the gradient sandwich plate, in which the face sheets and the core adopt the Kirchhoff theory and a [2, 1]-order theory, respectively. The material properties of the gradient foam core vary continuously along the thickness direction. The gradient plate model is validated with the finite element code ABAQUS®. And the results show that the proposed model can predict well the free vibration of composite sandwich plates with gradient foam cores. The influences of gradient foam cores on the natural frequency, deflection and energy absorbing of the sandwich plates are also investigated.

  2. The dynamic properties of sandwich structures based on metal-ceramic foams.

    Science.gov (United States)

    2014-01-01

    The present research program has studied the fracture properties of closed pore metal-ceramic foams for their potential applications as core systems in sandwich structures. The composite foams were created at Fireline, Inc. (Youngstown, OH) using the...

  3. Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

    DEFF Research Database (Denmark)

    Martakos, G.; Andreasen, J. H.; Berggreen, Christian

    2017-01-01

    of the embedded crack arresters was evaluated in terms of the achieved enhancement of the damage tolerance of the tested sandwich panels. A finite element (FE) model of the experimental setup was used for predicting propagation rates and direction of the crack growth. The FE simulation was based on the adoption......A novel crack arresting device has been implemented in sandwich panels and tested using a special rig to apply out-of-plane loading on the sandwich panel face-sheets. Fatigue crack propagation was induced in the face-core interface of the sandwich panels which met the crack arrester. The effect...... of linear fracture mechanics and a fatigue propagation law (i.e. Paris law) to predict the residual fatigue life-time and behaviour of the test specimens. Finally, a comparison between the experimental results and the numerical simulations was made to validate the numerical predictions as well...

  4. Impact Response of Aluminum Foam Sandwiches for Light-Weight Ship Structures

    Directory of Open Access Journals (Sweden)

    Eugenio Guglielmino

    2011-12-01

    Full Text Available The structures realized using sandwich technologies combine low weight with high energy absorbing capacity, so they are suitable for applications in the transport industry (automotive, aerospace, shipbuilding industry where the “lightweight design” philosophy and the safety of vehicles are very important aspects. While sandwich structures with polymeric foams have been applied for many years, currently there is a considerable and growing interest in the use of sandwiches with aluminum foam core. The aim of this paper was the analysis of low-velocity impact response of AFS (aluminum foam sandwiches panels and the investigation of their collapse modes. Low velocity impact tests were carried out by a drop test machine and a theoretical approach, based on the energy balance model, has been applied to investigate their impact behavior. The failure mode and the internal damage of the impacted AFS have also been investigated by a Computed Tomography (CT system.

  5. Penetration of sandwich plates with hybrid-cores under oblique ballistic impact

    Directory of Open Access Journals (Sweden)

    Changye Ni

    2014-01-01

    Full Text Available The oblique penetration performance of lightweight hybrid-cored sandwich plates are investigated numerically. To compose the hybrid-core, ceramic prisms are inserted into pyramidal metal lattice trusses and fixed using epoxy resin. Three-dimensional finite element simulations are carried out for the hybridcored sandwich impacted at 15°, 30°, 45°, and 60° obliquity by a hemispherical projectile. The ballistic limit, the energy absorbed by the constituting elements, and the critical oblique angle are quantified. The physical mechanisms underlying the failure and the influence of fundamental system parameters are explored. The angle of obliquity is found to have significant influence on the ballistic trajectory and erosion of the projectile, thus it is important for the impact response and penetration resistance of the sandwich. For oblique angles equal to or larger than 45°, the projectile moves mainly horizontally and can not effectively penetrate across the sandwich.

  6. Flutter Characteristic Study of Composite Sandwich Panel with Functionally Graded Foam Core

    Directory of Open Access Journals (Sweden)

    Peng Jin

    2016-01-01

    Full Text Available This paper attempts to investigate the flutter characteristic of sandwich panel composed of laminated facesheets and a functionally graded foam core. The macroscopic properties of the foam core change continuously along this direction parallel to the facesheet lamina. The model used in the study is a simple sandwich panel-wing clamped at the root, with three simple types of grading strategies for FGM core: (1 linear grading strategy in the chord-wise direction, (2 linear grading strategy in the span-wise direction, and (3 bilinear grading of properties of foam core across the panel. The results show that use of FGM core has the potential to increase the flutter speed of the sandwich panel. Finally, a minimum weight design of composite sandwich panel with lamination parameters of facesheet and density distribution of foam core as design variables is conducted using particle swarm optimization (PSO.

  7. Stress Distribution on Sandwich Structure with Triangular Grid Cores Suffered from Bending Load

    Directory of Open Access Journals (Sweden)

    Cui Xu

    2015-01-01

    Full Text Available Triangular grid reinforced by carbon fiber/epoxy (CF/EP was designed and manufactured. The sandwich structure was prepared by gluing the core and composite skins. The mechanical properties of the sandwich structure were investigated by the finite element analysis (FEA and three-point bending methods. The calculated bending stiffness and core shear stress were compared to the characteristics of a honeycomb sandwich structure. The results indicated that the triangular core ultimately failed under a bending load of 11000 N; the principal stress concentration was located at the loading region; and the cracks occurred on the interface top skin and triangular core. In addition, the ultimate stress bearing of the sandwich structure was 8828 N. The experimental results showed that the carbon fiber reinforced triangular grid was much stiffer and stronger than the honeycomb structure.

  8. An Investigation on Low Velocity Impact Response of Multilayer Sandwich Composite Structures

    Directory of Open Access Journals (Sweden)

    S. Jedari Salami

    2013-01-01

    Full Text Available The effects of adding an extra layer within a sandwich panel and two different core types in top and bottom cores on low velocity impact loadings are studied experimentally in this paper. The panel includes polymer composite laminated sheets for faces and the internal laminated sheet called extra layer sheet, and two types of crushable foams are selected as the core material. Low velocity impact tests were carried out by drop hammer testing machine to the clamped multilayer sandwich panels with expanded polypropylene (EPP and polyurethane rigid (PUR in the top and bottom cores. Local displacement of the top core, contact force and deflection of the sandwich panel were obtained for different locations of the internal sheet; meanwhile the EPP and PUR were used in the top and bottom cores alternatively. It was found that the core material type has made significant role in improving the sandwich panel’s behavior compared with the effect of extra layer location.

  9. Blast-Resistant Improvement of Sandwich Armor Structure with Aluminum Foam Composite

    Directory of Open Access Journals (Sweden)

    Shu Yang

    2013-01-01

    Full Text Available Sandwich armor structures with aluminum foam can be utilized to protect a military vehicle from harmful blast load such as a landmine explosion. In this paper, a system-level dynamic finite element model is developed to simulate the blast event and to evaluate the blast-resistant performance of the sandwich armor structure. It is found that a sandwich armor structure with only aluminum foam is capable of mitigating crew injuries under a moderate blast load. However, a severe blast load causes force enhancement and results in much worse crew injury. An isolating layer between the aluminum foam and the vehicle floor is introduced to remediate this drawback. The results show that the blast-resistant capability of the innovative sandwich armor structure with the isolating layer increases remarkably.

  10. Sandwich panels with high performance concrete thin plates at elevated temperatures

    DEFF Research Database (Denmark)

    Hulin, Thomas; Hodicky, Kamil; Schmidt, Jacob Wittrup

    2015-01-01

    Performance of conventional load-carrying sandwich structures made of concrete can be improved by the use of high performance concrete (HPC) plates of thin sections (30 mm), linked by shear connectors ensuring the composite behaviour of the structure. This paper proposes the application...... concerned HMT modelling and elastic stress analysis with nonlinear temperature effects of a full size loaded sandwich wall, qualitatively assessing the location of critically stressed zones. Modelling output was compared to published experimental results. The model reproduced experimental temperature...

  11. Photocatalytic perfermance of sandwich-like BiVO{sub 4} sheets by microwave assisted synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Suqin, E-mail: liusuqin888@126.com [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Hubei Key Laboratory of Low Dimensional Optoelectronic Materials and Devices, Xiangyang 441053 (China); Tang, Huiling; Zhou, Huan [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Dai, Gaopeng, E-mail: dgp2000@126.com [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China); Wang, Wanqiang [Department of Chemical engineering and Food Science, Hubei University of arts and science, Xiangyang 441053 (China)

    2017-01-01

    Graphical abstract: Sandwich-like BiVO{sub 4} sheets were successfully synthesized via a facile microwave-assisted method. The as-prepared samples exhibit a high activity for the degradation of methyl orange under visible light irradiation. - Highlights: • Sandwich-like BiVO{sub 4} sheets were synthesized by a facile microwave-assisted method. • The presence of PEG-10000 plays a critical role in the formation of BiVO{sub 4} sheets. • Ostwald ripening is the primary driving force for the formation of sandwich-like BiVO{sub 4}. • The sandwich-like BiVO{sub 4} sheets exhibit a high visible-light photocatalytic activity. - Abstract: Sandwich-like BiVO{sub 4} sheets were successfully synthesized in an aqueous solution containing bismuth nitrate, ammonium metavanadate and polyethylene glycol with a molecular weight of 10,000 (PEG-10000) using a facile microwave-assisted method. The as-prepared samples were characterized by scanning electron microscopy, N{sub 2} adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectroscopy. The results show that the presence of PEG-10000 plays a critical role in the formation of BiVO{sub 4} sheets, and Ostwald ripening is the primary driving force for the formation of sandwich-like structures. The sandwich-like BiVO{sub 4} sheets exhibit a high activity for the degradation of methyl orange under visible light irradiation (λ ≥ 420 nm). The enhancement of photocatalytic activity of sandwich-like BiVO{sub 4} sheets can be attributed to its large surface area over the irregular BiVO{sub 4} particles.

  12. Full-scale performance assessment of aircraft secondary sandwich structure using thermoelastic stress analysis

    OpenAIRE

    Crump, D.A.; Dulieu-Barton, J.M.; Savage, J

    2009-01-01

    The use of resin film infusion (RFI) has been proven to reduce the cost of production of aircraft secondary sandwich structure. In this paper thermoelastic stress analysis (TSA) is used to assess the performance of full scale aircraft sandwich structure panels produced using both the conventional autoclave process and RFI. Finite element (FE) models of both panel types are developed and TSA is used to validate the models.

  13. EXPERIMENTAL ANALYSIS OF FLEXURAL STRENGTH ON GLASS FIBER SANDWICH COMPOSITE BY VARYING Z-PINS PITCHES

    OpenAIRE

    Pravin*, Jeyapratha

    2016-01-01

    This paper ambit to evaluate the flexural strength of glass fiber sandwich panels with varying z-pins pitches. Failure of sandwich panel are delamination and core shear, to minimize the crack propagation, pins are inserted in z-direction, by varying pitches through its thickness. During the insertion of pin, may cause the material some damage. Despite the damage, flexural property does not affected due interpolation of pins. Although the experiment were pull out with a phenomenal results of z...

  14. Assessment of foam fracture in sandwich beams using thermoelastic stress analysis

    DEFF Research Database (Denmark)

    Dulieu-Barton, J.M.; Berggreen, Christian; Mettemberg, C.

    2009-01-01

    Thermoelastic Stress Analysis (TSA) has been well established for determining crack-tip parameters in metallic materials. This paper examines its ability to determine accurately the crack-tip parameters for PVC foam used in sandwich structures.......Thermoelastic Stress Analysis (TSA) has been well established for determining crack-tip parameters in metallic materials. This paper examines its ability to determine accurately the crack-tip parameters for PVC foam used in sandwich structures....

  15. Mixed mode fracture toughness characterization of sandwich interfaces using the modified TSD specimen

    DEFF Research Database (Denmark)

    Berggreen, Christian; Andreasen, J.H.; Carlsson, L.A.

    2009-01-01

    An extensive parametric analysis shows that the modified Tilted Sandwich Debond (TSD) specimen provides a methodology for characterization of the face/core fracture resistance over a range of mode-mixities. A pilot experimental mixed mode characterization of the fracture toughness of sandwich spe...... specimens, with composite faces and various PVC foam cores spanning a range of phase angles, has been achieved by specific steel bar reinforcements and testing over a range of tilt angles....

  16. Evaluation of Shear Tie Connectors for Use in Insulated Concrete Sandwich Panels

    Science.gov (United States)

    2009-12-01

    of non-load bearing precast/ prestressed or tilt-up concrete sandwich wall panels (WP) are examined. These components are used extensively in modern... prestress wall panels, precast wall panels, tilt-up wall panels, concrete insulted wall systems U U U UU 37 Paul Sheppard Reset i Table of...illustrate this concept, the blast resistances of non-load bearing precast/ prestressed or tilt-up concrete sandwich wall panels were examined. These

  17. Influences of impurities in recycled plastics on properties of PIM sandwich panels

    OpenAIRE

    Qi, K; Song, J.; Tarverdi, K

    2009-01-01

    Powder impression moulding (PIM) is a novel technology for manufacturing lightweight sandwich panels from plastics in powder form. The process is featured by its high tolerant to impurities or contaminants in the feedstock and thus requires much less materials segregation and cleaning operations when use recycled plastics. This paper investigate the influences of polymer impurities and soil contamination on structure and properties of PIM sandwich panels using compositions that simulate a PE-...

  18. Polyisocyanurate systems for insulating and sandwich elements; Polyisocyanurat-Systeme fuer Daemm- und Sandwichelemente

    Energy Technology Data Exchange (ETDEWEB)

    Malotki, P. von [Elastogran GmbH, Lemfoerde (Germany)

    2000-07-01

    PUR rigid foam plates are laminated with flexible Al films, paper or glass non-wovens, or may be processed into sandwich elements with metallic top-layers via coil-coating. Dependence of heat insulation efficiency, dimensional stability and fire behavior of the foam on chemical composition and the blowing agents is considered and compared with polyisocyanurate foams. Recipes for the production of PIR heat insulation elements and sandwich elements are given.

  19. Piezoelectric performance of fluor polymer sandwiches with different void structures

    Science.gov (United States)

    Lou, Kexing; Zhang, Xiaoqing; Xia, Zhongfu

    2012-06-01

    Film sandwiches, consisting of two outer layers of fluoroethylenepropylene and one middle layer of patterned porous polytetrafluoroethylene, were prepared by patterning and fusion bonding. Contact charging was conducted to render the films piezoelectric. The critical voltage to trigger air breakdown in the inner voids in the fabricated films was investigated. The piezoelectric d 33 coefficients were measured employing the quasistatic method and dielectric resonance spectrum. The results show that the critical voltage for air breakdown in the inner voids is associated with the void microstructure of the films. For the films with patterning factors of 0%, 25% and 44%, the critical values are 300, 230 and 230 kV/cm, respectively. With an increase in the patterning factor, both the piezoelectric d 33 coefficients determined from the dielectric resonance spectra and those determined from quasistatic measurements increase, which might be due to a decrease in Young's modulus for the films. The nonlinearity of d 33 becomes increasingly obvious as the patterning factor increases.

  20. Refined Zigzag Theory for Laminated Composite and Sandwich Plates

    Science.gov (United States)

    Tessler, Alexander; DiSciuva, Marco; Gherlone, Marco

    2009-01-01

    A refined zigzag theory is presented for laminated-composite and sandwich plates that includes the kinematics of first-order shear deformation theory as its baseline. The theory is variationally consistent and is derived from the virtual work principle. Novel piecewise-linear zigzag functions that provide a more realistic representation of the deformation states of transverse-shear-flexible plates than other similar theories are used. The formulation does not enforce full continuity of the transverse shear stresses across the plate s thickness, yet is robust. Transverse-shear correction factors are not required to yield accurate results. The theory is devoid of the shortcomings inherent in the previous zigzag theories including shear-force inconsistency and difficulties in simulating clamped boundary conditions, which have greatly limited the accuracy of these theories. This new theory requires only C(sup 0)-continuous kinematic approximations and is perfectly suited for developing computationally efficient finite elements. The theory should be useful for obtaining relatively efficient, accurate estimates of structural response needed to design high-performance load-bearing aerospace structures.

  1. Simulations of backgate sandwich nanowire MOSFETs with improved device performance

    Science.gov (United States)

    Hengliang, Zhao; Huilong, Zhu; Jian, Zhong; Xiaolong, Ma; Xing, Wei; Chao, Zhao; Dapeng, Chen; Tianchun, Ye

    2014-10-01

    We propose a novel backgate sandwich nanowire MOSFET (SNFET), which offers the advantages of ETSOI (dynamic backgate voltage controllability) and nanowire FETs (good short channel effect). A backgate is used for threshold voltage (Vt) control of the SNFET. Compared with a backgate FinFET with a punch-through stop layer (PTSL), the SNFET possesses improved device performance. 3D device simulations indicate that the SNFET has a three times larger overdrive current, a ~75% smaller off leakage current, and reduced subthreshold swing (SS) and DIBL than those of a backgate FinFET when the nanowire (NW) and the fin are of equal width. A new process flow to fabricate the backgate SNFET is also proposed in this work. Our analytical model suggests that Vt control by the backgate can be attributed to the capacitances formed by the frontgate, NW, and backgate. The SNFET devices are compatible with the latest state-of-the-art high-k/metal gate CMOS technology with the unique capability of independent backgate control for nFETs and pFETs, which is promising for sub-22 nm scaling down.

  2. γ-Cyclodextrin cuprate sandwich-type complexes.

    Science.gov (United States)

    Bagabas, Abdulaziz A; Frasconi, Marco; Iehl, Julien; Hauser, Brad; Farha, Omar K; Hupp, Joseph T; Hartlieb, Karel J; Botros, Youssry Y; Stoddart, J Fraser

    2013-03-18

    Three structures, based on γ-cyclodextrin (γ-CD) and metal ions (Cu(2+), Li(+), Na(+), and Rb(+)), have been prepared in aqueous and alkaline media and characterized structurally by single-crystal X-ray diffraction. Their dimeric assemblies adopt cylindrical channels along the c axes in the crystals. Coordinative and hydrogen bonding between the cylinders and the solvent molecules lead to the formation of two-dimensional sheets, with the identity of the alkali-metal ion strongly influencing the precise nature of the solid-state structures. In the case of the Rb(+) complex, coordinative bonding involving the Rb(+) ions leads to the formation of an extended two-dimensional structure. Nonbound solvent molecules can be removed, and gas isotherm analyses confirm the permanent porosity of these new complexes. Carbon dioxide (CO2) adsorption studies show that the extended structure, obtained upon crystallization of the Rb(+)-based sandwich-type dimers, has the highest CO2 sequestration ability of the three γ-CD complexes reported.

  3. Metal foam sandwich structure as a high temperature heat exchanger

    Energy Technology Data Exchange (ETDEWEB)

    Salimijazi, H.R.; Pershin, L.; Coyle, T.W.; Mostaghimi, J.; Chandra, S. [Toronto Univ., ON (Canada)

    2008-07-01

    Nickel-based superalloys can be used at temperatures up to 1050 C in air. Superalloy open cell foam sheets with skin layers plasma sprayed on both sides can be used as high temperature heat exchangers provided that the two deposited skins are dense and well adhered to the open cell foam. In this study alloy 625 skins were deposited on each side of a sheet of metal foam by APS and HVOF to form a sandwich structure. Two densities of open cell foams, 20 and 10 pores per linear inch (ppi), were used in this study as the core. The initial Ni foam was converted to an alloy composition by plasma spraying aluminum and chromium on the foam's struts with subsequent diffusion/solutionizing heat treatments before the alloy 625 skins were deposited. The microstructure of the coatings and the interface between the struts and skins was investigated. A layer of Ni-Al alloy was formed near the surface of the struts as a result of the heat treatment. The foam struts were imbedded more deeply into the coatings deposited by HVOF than the coatings deposited by APS. (orig.)

  4. Numerical investigation of blanking for metal polymer sandwich sheets

    Directory of Open Access Journals (Sweden)

    Gutknecht Florian

    2016-01-01

    Full Text Available Metal polymer sandwich sheets consist of materials with drastically different mechanical properties. Due to this fact and because of high local gradients in the cutting zone during the blanking process, traditional process strategies and empirical knowledge are difficult to apply. A finite-element simulation of the shear cutting process is used to predict the necessary force and the geometry of the cutting surface. A fully-coupled ductile damage model is used for the description of the material behaviour. This model considers the influence of shear and compression-dominated stress states on the initiation of damage. Experimental tensile and compression test data is used for the identification of material parameters. The results of the blanking simulation are compared with experimental data. Furthermore, the evolution of the stress state is analysed to gain understanding of the underlying physics. Finally this model enables the prediction of core compression and other quantities such as the acting stresses and corresponding triaxilities, which provide valuable information for the development of analytical models.

  5. PENGGUNAAN SANDWICH PLATE SYSTEM (SPS PADA KONSTRUKSI INNER BOTTOM

    Directory of Open Access Journals (Sweden)

    Ahmad Baidowi

    2015-06-01

    Full Text Available Perkembangan teknologi yang semakin maju memberikan alternatif-alternatif dalam memperbaiki berbagai bentuk sistem, termasuk di dalamnya konstruksi struktur kapal. Latar belakang dari penelitian ini adalah pada permasalahan kebutuhan material ringan pada kapal, kecepatan proses produksi, penyederhanaan konstruksi dan biaya perawatan kapal yang rendah. Penggunaan material ringan Sandwich Plate System (SPS menjadi salah satu jawaban dari permasalahan-permasalahan tersebut, penggunaan SPS dapat menyederhanakan bentuk dari konstruksi kapal dengan menghilangkan penegar inner bottom longitudinal dan mampu mengurangi Light Weight Tonnase (LWT. Artikel ini membahas perbandingan pola distribusi tegangan dan deformasi pada konstruksi bottom yang menggunakan SPS dan baja AH36, selain dari itu juga mengetahui seberapa besar pengurangan LWT yang dihasilkan untuk meningkatkan Payload kapal. Analisa dilakukan dengan simulasi numerik berdasarkan FEM pada konstruksi inner bottom dengan pembebanan muatan. Dari hasil simulasi didapatkan besar tegangan maksimal untuk material baja AH36 sebesar 226 Mpa dengan menggunakan penegar, sedangkan konstuksi dengan material SPS tegangan maksimal yang dihasilkan sebesar 221 Mpa tanpa penggunaan penegar, dengan deformasi maksimal untuk AH36 dan SPS yaitu 77 mm yang terjadi pada bagian tengah blok konstruksi inner bottom. Dengan hilangnya penegar berat konstruksi berkurang sebesar 13,05% dari penggunaan material baja AH36 sehingga memberikan peningkatan payload sebesar 13,05%. Simulasi penelitian dilakukan pada kapal Bulk Carrier (BC.

  6. An extraterrestrial sandwich: The perils of food in space.

    Science.gov (United States)

    Levi, Jane

    2010-03-01

    Food was and is an essential component in human space exploration. If it had not proved possible to eat and digest in space, none of the long-term space missions of the last four decades would have been achievable. Every country that has sent an astronaut on a mission has used its national foods as a means of stating both their presence and their identity to their colleagues in the programme and their citizens at home: in space, as on earth, food has provided a means of asserting national culture. From the earliest missions, the US and USSR's differing attitudes to the programme have been reflected in the food provided and the respective administrations' approaches to feeding in space. The contrast between the US focus on space travel and the USSR's focus on space living is highlighted through their attitudes to the often vexed question of what astronauts and cosmonauts should be permitted to eat, illustrated by the corned-beef sandwich incident of 1965. 2010 Elsevier Ltd. All rights reserved.

  7. Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

    Science.gov (United States)

    Nordendale, Nikolas A.; Goyal, Vinay K.; Lundgren, Eric C.; Patel, Dhruv N.; Farrokh, Babak; Jones, Justin; Fischetti, Grace; Segal, Kenneth N.

    2015-01-01

    An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

  8. Mechanical properties characterization of composite sandwich materials intended for space antenna applications

    Science.gov (United States)

    Bowles, Kenneth J.; Vannucci, Raymond D.

    1989-01-01

    The composite materials proposed for use in the Advanced Communications Technology Satellite (ACTS) program contains a new, high modulus graphite fiber as the reinforcement. A study was conducted to measure certain mechanical properties of the new fiber-reinforced material as well as of a composite-faced aluminum honeycomb sandwich structure. Properties were measured at -157, 22, and 121 C. Complete characterization of this material was not intended. Longitudinal tensile, picture-frame shear, short-beam shear, and flexural tests were performed on specimens of the composite face-sheet materials. Unidirectional, cross-plied, and quasi-isotropic fiber composite ply layup designs were fabricated and tested. These designs had been studied by using NASA's Integrated Composite Analyzer (ICAN) computer program. Flexural tests were conducted on (+/- 60/0 deg) sub s composite-faced sandwich structure material. Resistance strain gages were used to measure strains in the tensile, picture-frame, and sandwich flexural tests. The sandwich flexural strength was limited by the core strength at 157 and 22 c. The adhesive bond strength was the limiting factor at 121 C. Adhesive mechanical properties are reflected in sandwich structure flexural properties when the span-to-depth ratio is great enough to allow a significant shear effect on the load-deflection behavior of the sandwich beam. Most measured properties agreed satisfactorily with the properties predicted by ICAN.

  9. Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins

    Directory of Open Access Journals (Sweden)

    Zulzamri Salleh

    2016-12-01

    Full Text Available Sandwich composites or sandwich panels have been widely used as potential materials or building structures and are regarded as a lightweight material for marine applications. In particular, the mechanical properties, such as the compressive, tensile and flexural behaviour, of sandwich composites formed from glass fibre sheets used as the skin and glass microballoon/vinyl ester as the syntactic foam core were investigated in this report. This syntactic foam core is sandwiched between unidirectional glass fibre reinforced plastic (GFRP using vinyl ester resins to build high performance sandwich panels. The results show that the compressive and tensile strengths decrease when the glass microballoon content is increased in syntactic foam core of sandwich panels. Moreover, compressive modulus is also found to be decreased, and there is no trend for tensile modulus. Meanwhile, the flexural stiffness and effective flexural stiffness for edgewise position have a higher bending as 50% and 60%, respectively. Furthermore, the results indicated that the glass microballoon mixed in a vinyl ester should be controlled to obtain a good combination of the tensile, compressive and flexural strength properties.

  10. Development of a finite element model for the simulation of parabolic impact of sandwich panels

    Directory of Open Access Journals (Sweden)

    Ramakrishnan Karthik Ram

    2015-01-01

    Full Text Available Sandwich panels are lightweight structures of two thin high strength facesheets bonded to either side of a thick low density core such as foams and honeycombs. It is necessary to study the impact response of sandwich structures in order to ensure the reliability and safety of these structures. The response of sandwich panels to impact loading is usually studied for impact at normal angle of incidence. In real engineering situations, the structures are more frequently loaded at some oblique angle or with a complex trajectory. It is easy to carry out normal impact tests using devices like the drop tower, but impacts at oblique angles are difficult to characterise experimentally. A tri-dimensional impact device called Hexapod has been developed to experimentally study the impact loading of sandwich plates with a parabolic trajectory. The Hexapod is a modified Gough-Stewart platform that can be moved independently in the six degrees of freedom, corresponding to three translation axes and three rotation axes. In this paper, an approach for modelling the parabolic impact of sandwich structures with thin metallic facesheets and polymer foam core using commercial finite element code LS-DYNA software is presented. The results of the FE model of sandwich panels are compared with experimental data in terms of the time history of vertical and horizontal components of force. A comparison of the strain history obtained from Digital Image Correlation and LS-Dyna model are also presented.

  11. An Analysis of Nondestructive Evaluation Techniques for Polymer Matrix Composite Sandwich Materials

    Science.gov (United States)

    Cosgriff, Laura M.; Roberts, Gary D.; Binienda, Wieslaw K.; Zheng, Diahua; Averbeck, Timothy; Roth, Donald J.; Jeanneau, Philippe

    2006-01-01

    Structural sandwich materials composed of triaxially braided polymer matrix composite material face sheets sandwiching a foam core are being utilized for applications including aerospace components and recreational equipment. Since full scale components are being made from these sandwich materials, it is necessary to develop proper inspection practices for their manufacture and in-field use. Specifically, nondestructive evaluation (NDE) techniques need to be investigated for analysis of components made from these materials. Hockey blades made from sandwich materials and a flat sandwich sample were examined with multiple NDE techniques including thermographic, radiographic, and shearographic methods to investigate damage induced in the blades and flat panel components. Hockey blades used during actual play and a flat polymer matrix composite sandwich sample with damage inserted into the foam core were investigated with each technique. NDE images from the samples were presented and discussed. Structural elements within each blade were observed with radiographic imaging. Damaged regions and some structural elements of the hockey blades were identified with thermographic imaging. Structural elements, damaged regions, and other material variations were detected in the hockey blades with shearography. Each technique s advantages and disadvantages were considered in making recommendations for inspection of components made from these types of materials.

  12. Parametric study on nonlinear vibration of composite truss core sandwich plate with internal resonance

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jia Nen; Liu, Jun [Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin University of Technology, Tianjin (China); Zhang, Wei; Yao, Ming Hui [College of Mechanical Engineering, Beijing University of Technology, Beijing (China); Sun, Min [School of Science, Tianjin Chengjian University, Tianjin (China)

    2016-09-15

    Nonlinear vibrations of carbon fiber reinforced composite sandwich plate with pyramidal truss core are investigated. The governing equation of motion for the sandwich plate is derived by using a Zig-Zag theory under consideration of geometrically nonlinear. The natural frequencies of sandwich plates with different dimensions are calculated and compared with those obtained from the classic laminated plate theory and Reddy's third-order shear deformation plate theory. The frequency responses and waveforms of the sandwich plate when 1:3 internal resonance occurs are obtained, and the characteristics of the internal resonance are discussed. The influences of layer number of face sheet, strut radius, core height and inclination angle on the nonlinear responses of the sandwich plate are analyzed. The results demonstrate that the strut radius and inclination angle mainly affect the resonance frequency band of the sandwich plate, and the layer number and core height not only influence the resonance frequency band but also significantly affect the response amplitude.

  13. Constructed Wetlands

    Science.gov (United States)

    these systems can improve water quality, engineers and scientists construct systems that replicate the functions of natural wetlands. Constructed wetlands are treatment systems that use natural processes

  14. A quantitative exposure model simulating human norovirus transmission during preparation of deli sandwiches.

    Science.gov (United States)

    Stals, Ambroos; Jacxsens, Liesbeth; Baert, Leen; Van Coillie, Els; Uyttendaele, Mieke

    2015-03-02

    Human noroviruses (HuNoVs) are a major cause of food borne gastroenteritis worldwide. They are often transmitted via infected and shedding food handlers manipulating foods such as deli sandwiches. The presented study aimed to simulate HuNoV transmission during the preparation of deli sandwiches in a sandwich bar. A quantitative exposure model was developed by combining the GoldSim® and @Risk® software packages. Input data were collected from scientific literature and from a two week observational study performed at two sandwich bars. The model included three food handlers working during a three hour shift on a shared working surface where deli sandwiches are prepared. The model consisted of three components. The first component simulated the preparation of the deli sandwiches and contained the HuNoV reservoirs, locations within the model allowing the accumulation of NoV and the working of intervention measures. The second component covered the contamination sources being (1) the initial HuNoV contaminated lettuce used on the sandwiches and (2) HuNoV originating from a shedding food handler. The third component included four possible intervention measures to reduce HuNoV transmission: hand and surface disinfection during preparation of the sandwiches, hand gloving and hand washing after a restroom visit. A single HuNoV shedding food handler could cause mean levels of 43±18, 81±37 and 18±7 HuNoV particles present on the deli sandwiches, hands and working surfaces, respectively. Introduction of contaminated lettuce as the only source of HuNoV resulted in the presence of 6.4±0.8 and 4.3±0.4 HuNoV on the food and hand reservoirs. The inclusion of hand and surface disinfection and hand gloving as a single intervention measure was not effective in the model as only marginal reductions of HuNoV levels were noticeable in the different reservoirs. High compliance of hand washing after a restroom visit did reduce HuNoV presence substantially on all reservoirs. The

  15. A Refined Zigzag Beam Theory for Composite and Sandwich Beams

    Science.gov (United States)

    Tessler, Alexander; Sciuva, Marco Di; Gherlone, Marco

    2009-01-01

    A new refined theory for laminated composite and sandwich beams that contains the kinematics of the Timoshenko Beam Theory as a proper baseline subset is presented. This variationally consistent theory is derived from the virtual work principle and employs a novel piecewise linear zigzag function that provides a more realistic representation of the deformation states of transverse-shear flexible beams than other similar theories. This new zigzag function is unique in that it vanishes at the top and bottom bounding surfaces of a beam. The formulation does not enforce continuity of the transverse shear stress across the beam s cross-section, yet is robust. Two major shortcomings that are inherent in the previous zigzag theories, shear-force inconsistency and difficulties in simulating clamped boundary conditions, and that have greatly limited the utility of these previous theories are discussed in detail. An approach that has successfully resolved these shortcomings is presented herein. Exact solutions for simply supported and cantilevered beams subjected to static loads are derived and the improved modelling capability of the new zigzag beam theory is demonstrated. In particular, extensive results for thick beams with highly heterogeneous material lay-ups are discussed and compared with corresponding results obtained from elasticity solutions, two other zigzag theories, and high-fidelity finite element analyses. Comparisons with the baseline Timoshenko Beam Theory are also presented. The comparisons clearly show the improved accuracy of the new, refined zigzag theory presented herein over similar existing theories. This new theory can be readily extended to plate and shell structures, and should be useful for obtaining relatively low-cost, accurate estimates of structural response needed to design an important class of high-performance aerospace structures.

  16. Failure characteristics of a thin metallic sandwich plate with metallic sheared dimple cores under low-velocity impact loading

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Dong Gyu; Jeong, Woo Chul [Chosun University, Gwangju (Korea, Republic of)

    2013-10-15

    The functionality and the performance of a lightweight sandwich plate with periodic cellular metal (PCM) cores are influenced by failure characteristics of the lightweight sandwich plate. The goal of this paper is to investigate the failure characteristics of a thin metallic sandwich plate with metallic sheared dimple cores under low-velocity impact loading through nonlinear finite element analysis. The influence of the imperfection mode of the cores on the impact response of a thin sandwich plate is examined to obtain a proper simulation model. Repeated finite element analyses are performed to examine the failure modes of the sandwich plate for different impact conditions. Normalized impact parameters are defined in order to generalize a dynamic failure map (DFM). DFMs of the thin metallic sandwich plate have been estimated via the regression analysis of critical impact conditions for each failure mode. In addition, the influence of the normalized impact parameters on the failure mode has been investigated using the DFM.

  17. The sandwich technique for repair of pectus carinatum and excavatum/carinatum complex.

    Science.gov (United States)

    Park, Hyung Joo; Kim, Kyung Soo

    2016-09-01

    Simple external compression of pectus carinatum seems to have its limitations, particularly the repair of asymmetric pectus carinatum or excavatum/carinatum complex. We devised the sandwich technique (press-molding) to remodel the entire chest wall. The purpose of this study is to introduce the sandwich technique and appraise the early results. Between January 2007 and January 2016, 523 consecutive patients with pectus carinatum and its variants were analyzed retrospectively. No patients were excluded during the study period. The sandwich 1 and 2 techniques using the internal and external pectus bars were for pectus carinatum repair. Modified techniques using the external string and the internal bar were to treat the lower costal flare (the flare-buster) and focal protuberances (the magic string) in pectus excavatum repair. Statistical analyses were carried out using paired and unpaired t-test or Wilcoxon signed rank tests. The sandwich repair with the external and internal bars was applied to 58 pectus carinatum patients: seven symmetric (12.1%), 14 asymmetric (24.1%), and 37 carinatum-excavatum complex (63.8%). After pectus excavatum repair, 426 patients had the flare-buster and 39 patients received the magic string. The sandwich 1 technique achieved near-complete resolution of carinatum in 52 patients (86.2%). The sandwich 2 technique accomplished almost symmetric configuration with no residual carinatum in all six cases. The sandwich technique using the external and internal bars seems to be effective in treating asymmetric pectus carinatum and complex excavatum/carinatum deformities. The flare-buster and the magic string effectively relieve the costal flare and focal protuberances in pectus excavatum repair.

  18. Sandwich-like graphene-mesoporous carbon as sulfur host for enhanced lithium–sulfur batteries

    Science.gov (United States)

    Tian, Ting; Li, Bin; Zhu, Mengqi; Liu, Jianhua; Li, Songmei

    2017-10-01

    Graphene-mesoporous carbon/sulfur composites (G-MPC/S) were constructed by melt-infiltration of sulfur into graphene-mesoporous carbon which was synthesized by soft template method. The SEM and BET results of the graphene-mesoporous carbon show that the as-prepared sandwich-like G-MPC composites with a unique microporous-mesoporous structure had a high specific surface area of 554.164 m2 · g‑1 and an average pore size of about 13 nm. The XRD analysis presents the existence of orthorhombic sulfur in the G-MPC/S composite, which indicates the complete infiltration of sulfur into the pores of the G-MPC. When the graphene-mesoporous carbon/surfur composites (G-MPC/S) with 53.9 wt.% sulfur loading were used as the cathode for lithium–sulfur (Li–S) batteries, it exhibited an outstanding electrochemical performance including excellent initial discharge specific capacity of 1393 mAh · g‑1 at 0.1 °C, high cycle stability (731 mAh · g‑1 at 200 cycles) and good rate performance (1038 mAh · g‑1, 770 mAh · g‑1, 518 mAh · g‑1 and 377 mAh · g‑1 at 0.1 °C, 0.2 °C, 0.5 °C and 1 °C, respectively), which suggested the important role of the G-MPC composite in providing more electrons and ions channels, in addition, the shuttle effect caused by the dissolved polysulfide was also suppressed.

  19. Construction management

    CERN Document Server

    Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

    2014-01-01

    The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

  20. Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

    Science.gov (United States)

    Ryan, Shannon; Christiansen, Eric; Lear, Dana

    2009-01-01

    Metallic foams are a relatively new class of materials with low density and novel physical, mechanical, thermal, electrical and acoustic properties. Although incompletely characterized, they offer comparable mechanical performance to traditional spacecraft structural materials (i.e. honeycomb sandwich panels) without detrimental through-thickness channeling cells. There are two competing types of metallic foams: open cell and closed cell. Open cell foams are considered the more promising technology due to their lower weight and higher degree of homogeneity. Leading micrometeoroid and orbital debris shields (MMOD) incorporate thin plates separated by a void space (i.e. Whipple shield). Inclusion of intermediate fabric layers, or multiple bumper plates have led to significant performance enhancements, yet these shields require additional non-ballistic mass for installation (fasteners, supports, etc.) that can consume up to 35% of the total shield weight [1]. Structural panels, such as open cell foam core sandwich panels, that are also capable of providing sufficient MMOD protection, represent a significant potential for increased efficiency in hypervelocity impact shielding from a systems perspective through a reduction in required non-ballistic mass. In this paper, the results of an extensive impact test program on aluminum foam core sandwich panels are reported. The effect of pore density, and core thickness on shielding performance have been evaluated over impact velocities ranging from 2.2 - 9.3 km/s at various angles. A number of additional tests on alternate sandwich panel configurations of comparable-weight have also been performed, including aluminum honeycomb sandwich panels (see Figure 1), Nomex honeycomb core sandwich panels, and 3D aluminum honeycomb sandwich panels. A total of 70 hypervelocity impact tests are reported, from which an empirical ballistic limit equation (BLE) has been derived. The BLE is in the standard form suitable for implementation in

  1. Use of a sandwich plate system in a Virginia bridge.

    Science.gov (United States)

    2009-01-01

    The deterioration of the nation's civil infrastructure has prompted the investigation of numerous solutions to the problem. Some of these solutions have come in the form of innovative materials for new construction, whereas others have considered reh...

  2. Development of indirect sandwich ELISA for determination of excretory-secretory antigens of Fasciola hepatica

    Directory of Open Access Journals (Sweden)

    Libertad Alzamora-Gonzales

    2016-05-01

    Full Text Available Fasciolosis is a cosmopolitan parasitosis medical-veterinary importance caused by Fasciola hepatica, which affects sheep, goats and cattle; and it affects man accidentally causing an epidemic-endemic infection difficult to diagnose. The aim was to develop an indirect sandwich ELISA with 3 antibodies for detecting excretory-secretory antigens of Fasciola hepatica (ESFh. For the development of indirect sandwich ELISA were used, as capture antibody, mouse polyclonal antibodies anti ESFh and polyclonal antibodies rabbit anti-ESFh as detection antibody, at the concentrations of 10 and 5 µg/mL respectively. The conjugate used was mouse monoclonal anti- total immunoglobulins rabbit linked to peroxidase (1/1000. Were analized 31 sheep fecal samples, and the results were compared with those obtained by direct coproparasitological examination (DC and counterimmunoelectrophoresis (CIEP. The detection limit obtained for indirect sandwich ELISA was 100 ng/mL. The test had a 100% sensitivity, 96.6% specificity, positive and negative predictive values of 50% and 96.6% respectively, in relation to DC test. Comparing with CIEP the specificity obtained for indirect sandwich ELISA was 93.5% and a negative predictive value of 100%. We concluded that indirect sandwich ELISA designed is able to detect metabolic antigens in ovine feces samples and can be used for Fasciola hepatica diagnosis.

  3. Sound transmission analysis of MR fluid based-circular sandwich panels: Experimental and finite element analysis

    Science.gov (United States)

    Hemmatian, Masoud; Sedaghati, Ramin

    2017-11-01

    Magnetorheological Fluids (MR) have been recently utilized in sandwich panels to provide variable stiffness and damping to effectively control vibrations. In this study, the sound transmission behavior of MR based-sandwich panels is investigated through development of an efficient finite element model. A clamped circular sandwich panel with elastic face sheets and MR Fluid as the core layer has been considered. A finite element model utilizing circular and annular elements has been developed to derive the governing equations of motion in the finite element form. The transverse velocity is then calculated and utilized to obtain the sound radiated from the panel and subsequently the sound transmission loss. In order to validate the simulated results, a test setup including two anechoic spaces and an electro-magnet has been designed and fabricated. The magnetic flux density generated inside the electromagnet is simulated using magneto-static finite element analysis and validated with the measured magnetic flux density using Gaussmeter. The results from magneto-static analysis is used to derive an approximate polynomial function to evaluate the magnetic flux density as a function of the plate's radius and applied current. The STL and first axisymmetric natural frequency of the MR sandwich panels with aluminum face sheets are simulated and compared with those obtained experimentally. Finally, a parametric study on the effect of applied magnetic field, the thickness of the core layer and the thickness of face sheets on the STL and natural frequency of the adaptive sandwich panel are presented.

  4. Overall Buckling and Wringkling of Debonded Sandwich Beams: Finite Element and Experimental Results

    Directory of Open Access Journals (Sweden)

    Bambang K. Hadi

    2006-05-01

    Full Text Available Overall buckling and wrinkling of debonded sandwich beams under compressive loads were analyzed by both finite element and experimental methods. In the finite element method, a quarter and a half models of the specimens were analyzed. It shows that a quarter model is not adequate to analyze buckling of debonded sandwich beams, since it will disregard overall buckling mode that may occur in sandwich beams having compressive loads. At least a half model should be used to analyze buckling of sandwich beams. A finite element program UNA was used extensively to analyze the buckling loads. Experimental buckling of sandwich beams was carried out using a compression testing machine. Two LVDTs were used to measure deflections of the specimen during experimental loading. The loads were measured using load cells available in the machine. Specimens having core thickness of 45 and 75 mm were tested to represent overall and wrinkling modes respectively. The delamination lengths were 20, 60 and 80 mm, which represent 10, 30 and 40% of the beam length. The results show that the differences between experimental and finite element methods were less than 10%. Both overall buckling and wrinkling modes were shown in these specimens.

  5. Network architecture design of an agile sensing system with sandwich wireless sensor nodes

    Science.gov (United States)

    Dorvash, S.; Li, X.; Pakzad, S.; Cheng, L.

    2012-04-01

    Wireless sensor network (WSN) is recently emerged as a powerful tool in the structural health monitoring (SHM). Due to the limitations of wireless channel capacity and the heavy data traffic, the control on the network is usually not real time. On the other hand, many SHM applications require quick response when unexpected events, such as earthquake, happen. Realizing the need to have an agile monitoring system, an approach, called sandwich node, was proposed. Sandwich is a design of complex sensor node where two Imote2 nodes are connected with each other to enhance the capabilities of the sensing units. The extra channel and processing power, added into the nodes, enable agile responses of the sensing network, particularly in interrupting the network and altering the undergoing tasks for burst events. This paper presents the design of a testbed for examination of the performance of wireless sandwich nodes in a network. The designed elements of the network are the software architecture of remote and local nodes, and the triggering strategies for coordinating the sensing units. The performance of the designed network is evaluated through its implementation in a monitoring test in the laboratory. For both original Imote2 and the sandwich node, the response time is estimated. The results show that the sandwich node is an efficient solution to the collision issue in existing interrupt approaches and the latency in dense wireless sensor networks.

  6. Interface fatigue crack propagation in sandwich X-joints – Part I: Experiments

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian

    2013-01-01

    In this study, face/core fatigue crack growth in sandwich X-joints is investigated numerically and experimentally. The work presented here covers Part I of the study which includes an experimental investigation of fatigue crack growth in sandwich X-joints and characterization of the face/core int...... specimens. The measured crack growth rates have been used in Part II of this study to simulate fatigue crack growth in the sandwich tear test specimens.......In this study, face/core fatigue crack growth in sandwich X-joints is investigated numerically and experimentally. The work presented here covers Part I of the study which includes an experimental investigation of fatigue crack growth in sandwich X-joints and characterization of the face...... Correlation technique was used to locate the crack tip and monitor the crack growth. For the specimens with H45 core, unstable crack growth took place initially. Following the unstable propagation, the crack propagated in the core underneath the resin-rich cell layer approaching the interface. However...

  7. Cervical microleakage in Class II open-sandwich restorations: an in vitro study.

    Science.gov (United States)

    Fourie, J; Smit, C F

    2011-08-01

    The open-sandwich technique was proposed to solve the problem of cervical micro-leakage of deep Class II composite restorations by making use of the self-adhesive nature of the glass-ionomers. Recent advances in the properties of this family of materials may continue to make the technique relevant today. The aim of this in vitro study was to determine the effect of thermocycling, cervical position and the use of different materials on the cervical microleakage of Class II open-sandwich restorations. Two hundred standardised Class II cavities with the cervical margins placed in either enamel (100) or dentine (100) were prepared in 100 extracted human molars. Ketac Molar, set with ultrasound (US), Ketac Molar, Ketac Nano and Vitremer were used in equal groups to restore the cervical boxes, while Filtek Z250 was used to complete the restorations and also provided a control group in which the sandwich technique was not used. One half of each group was subjected to thermocycling. Microleakage was assessed by measuring the distance of penetration of basic fuchsin dye along the cervical step. The open-sandwich technique significantly (p<0.001) reduced the microleakage otherwise seen in Filtek Z250 when margins were placed in dentine and thermocycled. The use of an ultrasonically cured glass-ionomer in the open-sandwich resulted in the least microleakage (after thermocycling) when the cervical margins of Class II restorations were placed in dentine.

  8. A ballistic limit equation for hypervelocity impacts on composite honeycomb sandwich panel satellite structures

    Science.gov (United States)

    Ryan, S.; Schaefer, F.; Destefanis, R.; Lambert, M.

    During a recent experimental test campaign performed in the framework of ESA Contract 16721, the ballistic performance of multiple satellite-representative Carbon Fibre Reinforced Plastic (CFRP)/Aluminium honeycomb sandwich panel structural configurations (GOCE, Radarsat-2, Herschel/Planck, BeppoSax) was investigated using the two-stage light-gas guns at EMI. The experimental results were used to develop and validate a new empirical Ballistic Limit Equation (BLE), which was derived from an existing Whipple-shield BLE. This new BLE provided a good level of accuracy in predicting the ballistic performance of stand-alone sandwich panel structures. Additionally, the equation is capable of predicting the ballistic limit of a thin Al plate located at a standoff behind the sandwich panel structure. This thin plate is the representative of internal satellite systems, e.g. an Al electronic box cover, a wall of a metallic vessel, etc. Good agreement was achieved with both the experimental test campaign results and additional test data from the literature for the vast majority of set-ups investigated. For some experiments, the ballistic limit was conservatively predicted, a result attributed to shortcomings in correctly accounting for the presence of high surface density multi-layer insulation on the outer facesheet. Four existing BLEs commonly applied for application with stand-alone sandwich panels were reviewed using the new impact test data. It was found that a number of these common approaches provided non-conservative predictions for sandwich panels with CFRP facesheets.

  9. Experimental investigation on the dynamic response of clamped corrugated sandwich plates subjected to underwater impulsive loadings

    Science.gov (United States)

    Huang, Wei; Zhang, Wei; Li, Dacheng; Hypervelocity Impact Research Center Team

    2015-06-01

    Corrugated sandwich plates are widely used in marine industry because such plates have high strength-to-weight ratios and blast resistance. The laboratory-scaled fluid-structure interaction experiments are performed to demonstrate the shock resistance of solid monolithic plates and corrugated sandwich plates by quantifying the permanent transverse deflection at mid-span of the plates as a function of impulsive loadings per areal mass. Sandwich structures with 6mm-thick and 10mm-thick 3003 aluminum corrugated core and 5A06 face sheets are compared with the 5A06 solid monolithic plates in this paper. The dynamic deformation of plates are captured with the the 3D digital speckle correlation method (DIC). The results affirm that sandwich structures show a 30% reduction in the maximum plate deflection compare with a monolithic plate of identical mass per unit area, and the peak value of deflection effectively reduced by increasing the thickness core. The failure modes of sandwich plates consists of core crushing, imprinting, stretch tearing of face sheets, bending and permanent deformation of entire structure with the increasing impulsive loads, and the failure mechanisms are analyzed with the postmortem panels and dynamic deflection history captured by cameras. National Natural Science Foundation of China (NO.: 11372088).

  10. Viewpoints of working sandwich generation women and occupational therapists on role balance strategies.

    Science.gov (United States)

    Evans, Kiah L; Girdler, Sonya J; Falkmer, Torbjorn; Richmond, Janet E; Wagman, Petra; Millsteed, Jeannine; Falkmer, Marita

    2017-09-01

    Occupational therapists need to be cognizant of evidence-based role balance advice and strategies that women with multigenerational caring responsibilities can implement independently or with minimal assistance, as role balance may not be the primary goal during many encounters with this population. Hence, this study aimed to identify the viewpoints on the most helpful role balance strategies for working sandwich generation women, both from their own perspectives and from the perspective of occupational therapists. This was achieved through a Q methodology study, where 54 statements were based on findings from interviews, sandwich generation literature and occupational therapy literature. In total, 31 working sandwich generation women and 42 occupational therapists completed the Q sort through either online or paper administration. The data were analysed using factor analysis with varimax rotation and were interpreted through collaboration with experts in the field. The findings revealed similarities between working sandwich generation women and occupational therapists, particularly in terms of advocating strategies related to sleep, rest and seeking practical assistance from support networks. Differences were also present, with working sandwich generation women viewpoints tending to emphasize strategies related to coping with a busy lifestyle attending to multiple responsibilities. In contrast, occupational therapy viewpoints prioritized strategies related to the occupational therapy process, such as goal setting, activity focused interventions, monitoring progress and facilitating sustainable outcomes.

  11. Influence of Sandwich-Type Constrained Layer Damper Design Parameters on Damping Strength

    Directory of Open Access Journals (Sweden)

    Inaki Merideno

    2016-01-01

    Full Text Available This paper presents a theoretical study of the parameters that influence sandwich-type constrained layer damper design. Although there are different ways to reduce the noise generated by a railway wheel, most devices are based on the mechanism of increasing wheel damping. Sandwich-type constrained layer dampers can be designed so their resonance frequencies coincide with the wheel’s resonant vibration frequencies, and thus the damping effect can be concentrated within the frequency ranges of interest. However, the influence of design parameters has not yet been studied. Based on a number of numerical simulations, this paper provides recommendations for the design stages of sandwich-type constrained layer dampers.

  12. Investigation on vibration excitation of debonded sandwich structures using time-average digital holography.

    Science.gov (United States)

    Thomas, Binu P; Annamala Pillai, S; Narayanamurthy, C S

    2017-05-01

    Sandwich structures, in the modern aerospace industry, are more sought after due to their high strength to stiffness ratio resulting in significant weight gains. Optical techniques like time-average holography and shearography are preferred in industries for inspection of huge sandwich and composite panels because of whole-field (full coverage) inspection in a lesser time leading to large savings in cost. These techniques conventionally use sinusoidal frequency sweep to capture the local resonance of defective regions. This paper highlights the difficulties with the conventional approach of time-average digital holography (TADH) and proposes a novel defect identification strategy through square wave excitation. The proposed method enhances the speed and accuracy of inspection; thereby it saves cost and increases confidence level. Extensive experiments have been carried out using honeycomb sandwich panels to demonstrate the methodology.

  13. Mitigating the Hook Effect in Lateral Flow Sandwich Immunoassays Using Real-Time Reaction Kinetics.

    Science.gov (United States)

    Rey, Elizabeth G; O'Dell, Dakota; Mehta, Saurabh; Erickson, David

    2017-05-02

    The quantification of analyte concentrations using lateral flow assays is a low-cost and user-friendly alternative to traditional lab-based assays. However, sandwich-type immunoassays are often limited by the high-dose hook effect, which causes falsely low results when analytes are present at very high concentrations. In this paper, we present a reaction kinetics-based technique that solves this problem, significantly increasing the dynamic range of these devices. With the use of a traditional sandwich lateral flow immunoassay, a portable imaging device, and a mobile interface, we demonstrate the technique by quantifying C-reactive protein concentrations in human serum over a large portion of the physiological range. The technique could be applied to any hook effect-limited sandwich lateral flow assay and has a high level of accuracy even in the hook effect range.

  14. Combining photocatalytic hydrogen generation and capsule storage in graphene based sandwich structures

    Science.gov (United States)

    Yang, Li; Li, Xiyu; Zhang, Guozhen; Cui, Peng; Wang, Xijun; Jiang, Xiang; Zhao, Jin; Luo, Yi; Jiang, Jun

    2017-07-01

    The challenge of safe hydrogen storage has limited the practical application of solar-driven photocatalytic water splitting. It is hard to isolate hydrogen from oxygen products during water splitting to avoid unwanted reverse reaction or explosion. Here we propose a multi-layer structure where a carbon nitride is sandwiched between two graphene sheets modified by different functional groups. First-principles simulations demonstrate that such a system can harvest light and deliver photo-generated holes to the outer graphene-based sheets for water splitting and proton generation. Driven by electrostatic attraction, protons penetrate through graphene to react with electrons on the inner carbon nitride to generate hydrogen molecule. The produced hydrogen is completely isolated and stored with a high-density level within the sandwich, as no molecules could migrate through graphene. The ability of integrating photocatalytic hydrogen generation and safe capsule storage has made the sandwich system an exciting candidate for realistic solar and hydrogen energy utilization.

  15. Combining photocatalytic hydrogen generation and capsule storage in graphene based sandwich structures.

    Science.gov (United States)

    Yang, Li; Li, Xiyu; Zhang, Guozhen; Cui, Peng; Wang, Xijun; Jiang, Xiang; Zhao, Jin; Luo, Yi; Jiang, Jun

    2017-07-06

    The challenge of safe hydrogen storage has limited the practical application of solar-driven photocatalytic water splitting. It is hard to isolate hydrogen from oxygen products during water splitting to avoid unwanted reverse reaction or explosion. Here we propose a multi-layer structure where a carbon nitride is sandwiched between two graphene sheets modified by different functional groups. First-principles simulations demonstrate that such a system can harvest light and deliver photo-generated holes to the outer graphene-based sheets for water splitting and proton generation. Driven by electrostatic attraction, protons penetrate through graphene to react with electrons on the inner carbon nitride to generate hydrogen molecule. The produced hydrogen is completely isolated and stored with a high-density level within the sandwich, as no molecules could migrate through graphene. The ability of integrating photocatalytic hydrogen generation and safe capsule storage has made the sandwich system an exciting candidate for realistic solar and hydrogen energy utilization.

  16. The Use of Sprint Interface Element Delamination Simulation of Sandwich Composite Beam

    Science.gov (United States)

    Xu, Geng; Yan, Renjun

    2017-10-01

    Sandwich composite beams have been more and more used in various industries because of their excellent mechanical properties. However, the mismatched performance between face sheet and foam core always lead to such as cracks and damages in the core or face/core interface during the processes of manufacturing or service. Delamination damage at the adhesive interface is the most dangerous and could be one main source that the mechanical capability of the structure is serous degenerated. In this paper, a simple and natural model to evaluate the stiffness of the spring interface elements, which is based on the physics and the geometry of the adhesive layers, is proposed. In order to validate the model, cantilever beam bending test were conducted for marine sandwich composite I-beam. A good comparison has been found between predictions and experimental results, and results indicate that the spring interface element can provide an efficient model for the delamination simulation of sandwich composite structures.

  17. Dynamic Response of Soft Core Sandwich Beams with Metal-Graphene Nanocomposite Skins

    Directory of Open Access Journals (Sweden)

    M. A. R. Loja

    2017-01-01

    Full Text Available Sandwich structures are able to provide enhanced strength, stiffness, and lightweight characteristics, thus contributing to an improved overall structural response. To this sandwich configuration one may associate through-thickness graded core material properties and homogeneous or graded properties nanocomposite skins. These tailor-made possibilities may provide alternative design solutions to specific problem requisites. This work aims to address these possibilities, considering to this purpose a package of three beam layerwise models based on different shear deformation theories, implemented through Kriging-based finite elements. The viscoelastic behaviour of the sandwich core is modelled using the complex method and the dynamic problem is solved in the frequency domain. A set of case studies illustrates the performance of the models.

  18. Usability Constructs

    DEFF Research Database (Denmark)

    Hertzum, Morten; Clemmesen, Torkil; Hornbæk, Kasper Anders Søren

    2007-01-01

    Whereas research on usability predominantly employs universal definitions of the aspects that comprise usability, people experience their use of information systems through personal constructs. Based on 48 repertory-grid interviews, this study investigates how such personal constructs are affecte...

  19. Accelerated construction

    Science.gov (United States)

    2004-01-01

    Accelerated Construction Technology Transfer (ACTT) is a strategic process that uses various innovative techniques, strategies, and technologies to minimize actual construction time, while enhancing quality and safety on today's large, complex multip...

  20. Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet

    Directory of Open Access Journals (Sweden)

    Mostafa Sabzikar Boroujerdy1

    2013-01-01

    Full Text Available Sandwich structures are widely used in aerospace, high speed trains and marine applications because of lightweight and high in-plane and flexural stiffness. Sandwich structures consist of two thin face sheets and a core. Face sheets usually are made from highly stiff and highly strong materials; In general, the face sheets may be of different metal or composite layers. Both metal and composite face sheets have advantages and disadvantages, and searching for new materials with better properties is in progress. In this paper flexural behavior of a new generation sandwich beams with fiber metal laminate (FML face sheets were investigated experimentally. Three groups of specimens with different layer arrangements of face sheets consist of (Al/GE (0-90/GE(90-0/Al, (Al/GE(0-90/Al/GE(90-0 and (GE(0-90-0-90-90-0-90-0 and 40 kg/m3 polyurethane foam core were made and tested. The results show that sandwich beams with FML face sheets have better resistance against local loads, while composite faces are weak against intense loads. Also, FML faces are lighter than metal face sheets and have better connection to foam core. Also, a simple classical theory was used to predict the force-deflection behaviour of sandwich beams in elastic region. Good agreement between the experimental results and analytical prediction were obtained. Sandwich beams with FML face sheets have larger elastic region than beams with composite face sheets therefore agreement between the analytical and experimental results in these specimens are in larger area.

  1. Low-Velocity Impact Response of Sandwich Beams with Functionally Graded Core

    Science.gov (United States)

    Apetre, N. A.; Sankar, B. V.; Ambur, D. R.

    2006-01-01

    The problem of low-speed impact of a one-dimensional sandwich panel by a rigid cylindrical projectile is considered. The core of the sandwich panel is functionally graded such that the density, and hence its stiffness, vary through the thickness. The problem is a combination of static contact problem and dynamic response of the sandwich panel obtained via a simple nonlinear spring-mass model (quasi-static approximation). The variation of core Young's modulus is represented by a polynomial in the thickness coordinate, but the Poisson's ratio is kept constant. The two-dimensional elasticity equations for the plane sandwich structure are solved using a combination of Fourier series and Galerkin method. The contact problem is solved using the assumed contact stress distribution method. For the impact problem we used a simple dynamic model based on quasi-static behavior of the panel - the sandwich beam was modeled as a combination of two springs, a linear spring to account for the global deflection and a nonlinear spring to represent the local indentation effects. Results indicate that the contact stiffness of thc beam with graded core Increases causing the contact stresses and other stress components in the vicinity of contact to increase. However, the values of maximum strains corresponding to the maximum impact load arc reduced considerably due to grading of thc core properties. For a better comparison, the thickness of the functionally graded cores was chosen such that the flexural stiffness was equal to that of a beam with homogeneous core. The results indicate that functionally graded cores can be used effectively to mitigate or completely prevent impact damage in sandwich composites.

  2. Three-point bending of honeycomb sandwich beams with facesheet perforations

    Science.gov (United States)

    Su, Pengbo; Han, Bin; Zhao, Zhongnan; Zhang, Qiancheng; Lu, Tian Jian

    2017-12-01

    A novel square honeycomb-cored sandwich beam with perforated bottom facesheet is investigated under three-point bending, both analytically and numerically. Perforated square holes in the bottom facesheet are characterized by the area ratio of the hole to intact facesheet (perforation ratio). While for large-scale engineering applications like the decks of cargo vehicles and transportation ships, the perforations are needed to facilitate the fabrication process (e.g., laser welding) as well as service maintenance, it is demonstrated that these perforations, when properly designed, can also enhance the resistance of the sandwich to bending. For illustration, fair comparisons among competing sandwich designs having different perforation ratios but equal mass is achieved by systematically thickening the core webs. Further, the perforated sandwich beam is designed with a relatively thick facesheet to avoid local indention failure so that it mainly fails in two competing modes: (1) bending failure, i.e., yielding of beam cross-section and buckling of top facesheet caused by bending moment; (2) shear failure, i.e., yielding and buckling of core webs due to shear forcing. The sensitivity of the failure loads to the ratio of core height to beam span is also discussed for varying perforation ratios. As the perforation ratio is increased, the load of shear failure increases due to thickening core webs, while that of bending failure decreases due to the weakening bottom facesheet. Design of a sandwich beam with optimal perforation ratio is realized when the two failure loads are equal, leading to significantly enhanced failure load (up to 60% increase) relative to that of a non-perforated sandwich beam with equal mass.

  3. Degradation of shear stiffness of Nomex honeycomb sandwich panel in laser irradiation

    Science.gov (United States)

    Wang, Jiawei; Jiang, Houman; Wu, Lixiong; Zhu, Yongxiang; Wei, Chenghua; Ma, Zhiliang; Wang, Lijun

    2017-05-01

    Based on the overhanging beam three-point bending method, the experimental system was set up to measure the variety of shear stiffness of Nomex honeycomb sandwich panel in laser irradiation. The shear stiffness of the specimens under different laser power density was measured. The result shows that the thermal effect during the laser irradiation leads to the degradation of mechanical properties of Nomex honeycomb sandwich panel. High temperature rise rate in the specimen is another main reason for the shear stiffness degeneration. This research provides a reference for the degradation of mechanical properties of composite materials in laser irradiation and proposes a new method for the study of laser interaction with matter.

  4. Design and test of lightweight sandwich T-joint for naval ships

    DEFF Research Database (Denmark)

    Toftegaard, H.; Lystrup, Aa.

    2005-01-01

    -joint with reduced weight but with the same or higher strength than the existing design. The lightweight T-joint is designed for sandwich panels with 60 mm thick PVC foam core and 4 rum thick glass fibre/vinyl ester skin laminates. The panels are joined by use of filler and two triangular PVC foam fillets (core...... of panels joined by filler and overlaminates of the same thickness as the skin laminates. Various improved T-joints have been designed and investigated. Some with focus on improved strength (survivability), and others with focus on reduced weight. This paper describes the design and test of a sandwich T...

  5. Face/core debond fatigue crack growth characterization using the sandwich mixed mode bending specimen

    DEFF Research Database (Denmark)

    Manca, Marcello; Quispitupa, Amilcar; Berggreen, Christian

    2012-01-01

    Face/core fatigue crack growth in foam-cored sandwich composites is examined using the mixed mode bending (MMB) test method. The mixed mode loading at the debond crack tip is controlled by changing the load application point in the MMB test fixture. Sandwich specimens were manufactured using H45...... and H100 PVC foam cores and E-glass/polyester face sheets. All specimens were pre-cracked in order to define a sharp crack front. The static debond fracture toughness for each material configuration was measured at different mode-mixity phase angles. Fatigue tests were performed at 80% of the static...

  6. Impact response of ductile self-reinforced composite corrugated sandwich beams

    OpenAIRE

    Schneider, Christof; Kazemahvazi, Sohrab; Russell, B. P.; Zenkert, Dan; V. S. Deshpande

    2016-01-01

    Corrugated sandwich beams made entirely from self-reinforced poly (ethylene terephthalate) SrPET are manufactured and tested dynamically. The beams are subjected to impact loading at the mid-span using a metal foam projectile and the beam deflection is measured. For sandwich beams with a constant areal mass, beams with a high mass portion in the core webs outperform configurations with a high mass portion in the face sheets (given that the face sheets are thick enough to carry the transversal...

  7. Nonsmooth Recursive Identification of Sandwich Systems with Backlash-Like Hysteresis

    Directory of Open Access Journals (Sweden)

    Ruili Dong

    2012-01-01

    Full Text Available A recursive gradient identification algorithm based on the bundle method for sandwich systems with backlash-like hysteresis is presented in this paper. In this method, a dynamic parameter estimation scheme based on a subgradient is developed to handle the nonsmooth problem caused by the backlash embedded in the system. The search direction of the algorithm is estimated based on the so-called bundle method. Then, the convergence of the algorithm is discussed. After that, simulation results on a nonsmooth sandwich system are presented to validate the proposed estimation algorithm. Finally, the application of the proposed method to an X-Y moving positioning stage is illustrated.

  8. A J Integral Approach for Measuring Cohesive Laws Using a Modified DCB Sandwich Specimen

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Sørensen, Bent F.

    2007-01-01

    mode mixities. The sandwich specimen consists of glass fiber faces and Divinycell H200 foam core. Arbitrary stiffening of the sandwich specimen with steel bars adhered to the faces reduces rotations and ensures that the method is useable for a wide range of materials. The J integral is employed...... and the opening of the pre-crack tip is recorded by a commercial digital photogrammetry measurement system. Cohesive laws are extracted by differentiating J with respect to the normal and tangential opening of the pre-crack tip. Some results are presented and discussed....

  9. Photo-induced currents in the sandwich metal-ferroelectric-metal structure

    Science.gov (United States)

    Ivanov, V.; Karpets, Yu; Perkov, Yu

    2017-01-01

    It was described the photoelectric effect in thin sandwich metal-ferroelectric-metal system. The effect was observed in doped lithium niobate crystals with two electrodes of different metals. The effect is observed only in doped lithium niobate crystals and has a maximum for concentrations of impurities of iron around 0.3 % weight. This paper proposed thermal model of the investigated phenomena resulting from field contact potential difference on the borders of section of metal-ferroelectric material. The results obtained can be used to develop radiation receivers, as well as in the interpretation of experimental results on studying the properties of sandwiched metal-ferroelectric-metal structure.

  10. Stainless steel crown versus modified open-sandwich restorations for primary molars: a 2-year randomized clinical trial.

    Science.gov (United States)

    Atieh, Momen

    2008-09-01

    The aim of this study was to investigate the clinical performance and survival of stainless steel crown (SSC) restoration and modified open-sandwich technique using resin-modified glass ionomer cement. Randomized clinical trial. General dental practice. A total of 87 children aged 4-7 years at baseline with one or more primary molars that have undergone pulp therapy were randomly assigned to receive either SSC or modified open-sandwich restoration. One hundred and sixty restorations were placed and evaluated after 6, 12, 18, and 24 months using the Ryge criteria. Comparable survival rates were observed for both SSC and modified open-sandwich restoration. With only four SSCs and six modified open-sandwich restorations failing over 24 months, the survival rates were high for both materials (2-year survival rate: 95.0% for SSCs and 92.5% for modified open-sandwich restorations). Significantly better gingival health (P < 0.05) was observed for the modified open-sandwich restorations compared with SSCs, as only one modified open-sandwich restoration was rated Charlie compared to 13 SSCs. No significant differences were observed between the two materials for marginal integrity, proximal contact, occlusion, or recurrent caries. The 2-year results indicated that the modified open-sandwich restoration is an appropriate alternative to SSC in extensive restorations, particularly where aesthetic considerations are important.

  11. Electromagnetic waves reflection, transmission and absorption by graphene - magnetic semiconductor - graphene sandwich-structure in magnetic field: Faraday geometry

    OpenAIRE

    Kuzmin, Dmitry A.; Bychkov, Igor V.; Shavrov, Vladimir G.

    2014-01-01

    Electrodynamic properties of the graphene - magnetic semiconductor - graphene sandwich-structure have been investigated theoretically with taking into account the dissipation processes. Influence of graphene layers on electromagnetic waves propagation in graphene - semi-infinte magnetic semiconductor and graphene - magnetic semiconductor - graphene sandwich-structure has been analyzed. Frequency and field dependences of the reflectance, transmittance and absorbtance of electromagnetic waves b...

  12. Thermo-Fluidic Comparison between Sandwich Panels with Tetrahedral Lattice Cores Fabricated by Casting and Metal Sheet Folding

    Directory of Open Access Journals (Sweden)

    Xiaoqing Zhang

    2017-07-01

    Full Text Available This numerical study compares single-phase forced convective heat transfer between two sandwich panels with tetrahedral metallic lattice cores separately fabricated by investment casting and the more cost-effective metal sheet folding method. The numerical model is validated against available experimental data. For a given Reynolds number and core porosity, the results reveal that the brazed sandwich outperforms the casted sandwich, exhibiting a 13% to 16% higher Nusselt number. Bigger vertexes and more evident blockage of mainstream by the ligaments are found to intensify the horseshoe vortex and the counter-rotating vortex pair upstream and downstream of each vertex. Relative to the casted sandwich panel, therefore, endwall heat transfer is enhanced by 22% to 27%, while similar heat transfer is achieved on the ligaments. It is also found that, for a given Reynolds number, the brazed sandwich induces a 1.6 to 1.7 times higher pressure drop relative to the casted sandwich due to more severe flow separation caused by the sharp edges of the rectangular ligaments. Finally, for a given pumping power, both sandwiches provide a similar heat transfer performance. Given that the brazed sandwich is more cost-effective and easier to fabricate than the casted one, the former may be superior from an engineering application point of view.

  13. Thermo-mechanical interaction effects in foam cored sandwich panels-correlation between High-order models and Finite element analysis results

    DEFF Research Database (Denmark)

    Palleti, Hara Naga Krishna Teja; Santiuste, Carlos; Thomsen, Ole Thybo

    2010-01-01

    Thermo-mechanical interaction effects including thermal material degradation in polymer foam cored sandwich structures is investigated using the commercial Finite Element Analysis (FEA) package ABAQUS/Standard. Sandwich panels with different boundary conditions in the form of simply supported...

  14. Composites and Construction: Yesterday, today and tomorrow

    Directory of Open Access Journals (Sweden)

    Manso, J.

    1997-12-01

    Full Text Available We will try to give a idea about the possibilities of the Composites Materials in the Construction area, examining their applications since along time. We will begin by the integral closing the building, based in the panel sandwich concept. Immediately we will comment a new material, the COMPOSTEEL, a hybrid product made of composites plus steel, indicated to the structural country. Next, we will study the "Continuous Frame" oriented also at the structural area. Finally, we will finish with two ideas:
    a The composites solving the seism phenomenon. b The composites as a ceiling to big areas.

    We will try to give a idea about the possibilities of the Composites Materials in the Construction area, examining their applications since along time. We will begin by the integral closing the building, based in the panel sandwich concept. Immediately we will comment a new material, the COMPOSTEEL, a hybrid product made of composites plus steel, indicated to the structural country. Next, we will study the "Continuous Frame" oriented also at the structural area. Finally, we will finish with two ideas:
    a The composites solving the seism phenomenon. b The composites as a ceiling to big areas.

  15. Introduction to Sandwiches. Learning Activity Pack and Instructor's Guide 5.4a. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with types of sandwiches and their ingredients, to give tips on making and handling sandwich ingredients, and to explain how to set up a sandwich counter.…

  16. Morphing nacelle inlet lip with pneumatic actuators and a flexible nano composite sandwich panel

    Science.gov (United States)

    Gulsine Ozdemir, Nazli; Scarpa, Fabrizio; Craciun, Monica; Remillat, Chrystel; Lira, Cristian; Jagessur, Yogesh; Da Rocha-Schmidt, Luiz

    2015-12-01

    We present a hybrid pneumatic/flexible sandwich structure with thermoplastic (TP) nanocomposite skins to enable the morphing of a nacelle inlet lip. The design consists of pneumatic inflatables as actuators and a flexible sandwich panel that morphs under variable pressure combinations to adapt different flight conditions and save fuel. The sandwich panel forms the outer layer of the nacelle inlet lip. It is lightweight, compliant and impact resistant with no discontinuities, and consists of graphene-doped thermoplastic polyurethane (G/TPU) skins that are supported by an aluminium Flex-core honeycomb in the middle, with near zero in-plane Poisson’s ratio behaviour. A test rig for a reduced-scale demonstrator was designed and built to test the prototype of morphing nacelle with custom-made pneumatic actuators. The output force and the deflections of the experimental demonstrator are verified with the internal pressures of the actuators varying from 0 to 0.41 MPa. The results show the feasibility and promise of the hybrid inflatable/nanocomposite sandwich panel for morphing nacelle airframes.

  17. Sound transmission analysis of partially treated MR fluid-based sandwich panels using finite element method

    Science.gov (United States)

    Hemmatian, M.; Sedaghati, R.

    2017-04-01

    This study aims at developing a finite element model to predict the sound transmission loss (STL) of a multilayer panel partially treated with a Magnetorheological (MR) fluid core layer. MR fluids are smart materials with promising controllable rheological characteristics in which the application of an external magnetic field instantly changes their rheological properties. Partial treatment of sandwich panels with MR fluid core layer provides an opportunity to change stiffness and damping of the structure without significantly increasing the mass. The STL of a finite sandwich panel partially treated with MR fluid is modeled using the finite element (FE) method. Circular sandwich panels with clamped boundary condition and elastic face sheets in which the core layer is segmented circumferentially is considered. The MR fluid core layer is considered as a viscoelastic material with complex shear modulus with the magnetic field and frequency dependent storage and loss moduli. Neglecting the effect of the panel's vibration on the pressure forcing function, the work done by the acoustic pressure is expressed as a function of the blocked pressure in order to calculate the force vector in the equation of the motion of the panel. The governing finite element equation of motion of the MR sandwich panel is then developed to predict the transverse vibration of the panel which can then be utilized to obtain the radiated sound using Green's function. The developed model is used to conduct a systematic parametric study on the effect of different locations of MR fluid treatment on the natural frequencies and the STL.

  18. Development and evaluation of aerogel-filled BMI sandwich panels for thermal barrier applications

    Directory of Open Access Journals (Sweden)

    A. Dineshkumar

    2016-07-01

    Full Text Available This study details a fabrication methodology envisaged to manufacture Glass/BMI honeycomb core aerogel-filled sandwich panels. Silica aerogel granules are used as core fillers to provide thermal insulation properties with little weight increase. Experimental heat transfer studies are conducted on these panels to study the temperature distribution between their two surfaces. Numerical studies are also carried out to validate the results. Despite exhibiting good thermal shielding capabilities, the Glass/BMI sandwich panels are found to oxidise at 180 ºC if exposed directly to heat. In order to increase the temperature bearing capacity and the operating temperature range for these panels, a way of coating them from outside with high temperature spray paint was tried. With a silicone-based coating, the temperature sustainability of these sandwich panels is found to increase to 350 ºC. This proved the effectiveness of the formed manufacturing process, selected high temperature coating, the coating method as well as the envisaged sandwich panel concept.

  19. Optimization process for thin-walled high performance concrete sandwich panels

    DEFF Research Database (Denmark)

    Hodicky, Kamil; Hulin, Thomas; Schmidt, Jacob Wittrup

    2014-01-01

    economical solution. The present paper aims to provide multi-objective optimisation procedure addressed to structural precast thin-walled High Performance Concrete Sandwich Panels (HPCSP). The research aim is concerned with developing a tool that considers the cost of HPCSP materials along...

  20. Structural performance of new thin-walled concrete sandwich panel system reinforced with bfrp shear connectors

    DEFF Research Database (Denmark)

    Hodicky, Kamil; Hulin, Thomas; Schmidt, Jacob Wittrup

    2013-01-01

    This paper presents a new thin-walled concrete sandwich panel system reinforced with basalt fiber-reinforced plastic (BFRP) with optimum structural performances and a high thermal resistance developed by Connovate and Technical University of Denmark. The shear connecting system made of a BFRP grid...

  1. Optimization process for thin-walled High Performance Concrete sandwich panels

    DEFF Research Database (Denmark)

    Hodicky, Kamil; Hulin, Thomas; Schmidt, Jacob Wittrup

    2013-01-01

    economical solu-tion. The present paper aims to provide multi-objective optimisation procedure addressed to structural precast thin-walled High Performance Concrete Sandwich Panels (HPCSP). The research aim is concerned with de-veloping a tool that considers the cost of HPCSP materials along...

  2. Occurrence of Foodborne Pathogens in Chickens Sandwiches Distributed in Different Supermarkets of Tehran Province, Iran

    Directory of Open Access Journals (Sweden)

    Zohreh Mashak

    2014-07-01

    Full Text Available Background: Increasing urbanization, immigration and tourism has changed the human lifestyle. This modern lifestyle has demanded safety, quality, and fast availability of ready to eat (RTE foods like chicken sandwiches. Objectives: For presentation of proper solutions regarding food safety, identification of pathogens in different foods is necessary. Therefore, the present study was carried out to assess the microbiological quality of chicken sandwiches distributed in Tehran province, Iran. Materials and Methods: A total of 200 chicken sandwich samples (chicken sausage, chicken fillet, minced chicken fillet were purchased from different supermarkets in Tehran city randomly during 2013 and transported to the laboratory of food hygiene of Islamic Azad University, Karaj branch under temperature-controlled conditions for bacteriological examination by American Public Health Association (APHA method. Results: The average count ± standard error (and percent of unacceptable samples of S. aureus, B. cereus and Coliform were 1.6 ± 0.56 (28%, 2.0 ± 0.62 (10%, 4.2 ± 1.12 (50% CFU/g, respectively. Moreover, E. coli and Salmonella spp. were identified in 21% of chicken sandwich samples. Conclusions: The large number of foodborne pathogens detected in this study, represented a potential health hazard to consumers. Thus, it is necessary to employ Good Hygiene Practices (GHP and Hazard Analysis and Critical Control Points (HACCP in order to minimize the risk caused by secondary contamination.

  3. Fracture Characterization of PVC Foam Core Sandwich Specimen Using the DCB-UBM Test Method

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    2017-01-01

    coupled with experimental validation is paramount to determine the fracture resistance of the face/core interface. In this paper, the test-rig exploiting the double cantilever beam with uneven bending moments (DCB-UBM) concept is used to determine the fracture toughness of PVC foam core sandwich...

  4. Mechanical testing of CFRP materials for application as skins of sandwich composites

    Directory of Open Access Journals (Sweden)

    Adriana STEFAN

    2017-09-01

    Full Text Available Sandwich structures are ultralight materials that are part of a special class and consist of two face skins, that are thin, light and stiff. These materials are of great interest for aeronautical and aerospace applications and they represent one of the important research directions in this field. As skins, a large variety of materials can be used, i.e. aluminium, titanium or polymeric laminates. For the evaluation of sandwich composites based on metallic foam core, a larger study is being currently conducted, one of the objectives within this study being the evaluation of the sandwich system components (CFRP skins developed by two different methods: manual lay-up/room temperature curing and prepreg processing; as well as evaluation of core materials. This paper contains technical work that presents the preliminary results regarding the evaluation of CFRP skins based on CARP/T193 carbon fiber fabric and low viscosity L20 epoxy resin (Diglycidyl Ether of Bisphenol A developed by manual lay-up/room temperature curing. The obtained materials were tested at different mechanical loads and the failure mode was analyzed with the aim to evaluate their performances as possible skins of the sandwich structure with metallic foam core.

  5. Perbedaan Metode ELISA Sandwich A dan B dalam Deteksi Antigen Membran Toxoplasma gondii

    Directory of Open Access Journals (Sweden)

    ADI PRAYITNO

    2004-11-01

    Full Text Available Spreading of toxoplasmosis to fetus can by placenta, so it caused theabortion, born dead or congenital defect. To diagnosis this disease for fixed the acute infection must get the significant increasing of IgG by the soft fee. The objections of this study are to know the difference between ELISA Sandwich A and B in detecting of membrane antigen of Toxoplasma gondii (T. gondii in placenta tissue of pregnant women three-semester I and II with spontaneous abortion in Surakarta. One hundred serum and placenta tissue samples of pregnant women three-semester I and II with spontaneous abortion are got from dr. Muwardi Hospital. IgM anti Toxo from serum was examined by Toxo ISAGA Kit and IgG anti Toxo by Toxo Screen DA Kit. Detecting of membrane antigen of T. goodie from placenta tissue were done by ELISA Sandwich A and B. The result of this experiment showed that 33% were positive IBM and or Gig anti Toxo. Detection of membrane antigen toward 33 samples with positive Toxo (IgG positive was highly significant different between ELISA Sandwich A (3% positive toward ELISA Sandwich B (72.7% positive.

  6. Ultra-Lightweight Nanocomposite Foams and Sandwich Structures for Space Structure Applications

    Science.gov (United States)

    Tan, Seng

    2012-01-01

    Microcellular nanocomposite foams and sandwich structures have been created to have excellent electrical conductivity and radiation-resistant properties using a new method that does not involve or release any toxicity. The nanocomposite structures have been scaled up in size to 12 X 12 in. (30 X 30 cm) for components fabrication. These sandwich materials were fabricated mainly from PE, CNF, and carbon fibers. Test results indicate that they have very good compression and compression-after-impact properties, excellent electrical conductivity, and superior space environment durability. Compression tests show that 1000 ESH (equivalent Sun hours) of UV exposure has no effect on the structural properties of the sandwich structures. The structures are considerably lighter than aluminum alloy (= 36 percent lighter), which translates to 36 percent weight savings of the electronic enclosure and its housing. The good mechanical properties of the materials may enable the electronic housing to be fabricated with a thinner structure that further reduces the weight. There was no difficulty in machining the sandwich specimens into electronic enclosure housing.

  7. PSpice Modeling of a Sandwich Piezoelectric Ceramic Ultrasonic Transducer in Longitudinal Vibration.

    Science.gov (United States)

    Wei, Xiaoyuan; Yang, Yuan; Yao, Wenqing; Zhang, Lei

    2017-09-30

    Sandwiched piezoelectric transducers are widely used, especially in high power applications. For more convenient analysis and design, a PSpice lossy model of sandwiched piezoelectric ultrasonic transducers in longitudinal vibration is proposed by means of the one-dimensional wave and transmission line theories. With the proposed model, the resonance and antiresonance frequencies are obtained, and it is shown that the simulations and measurements have good consistency. For the purpose of further verification the accuracy and application of the PSpice model, a pitch-catch setup and an experimental platform are built. They include two sandwiched piezoelectric ultrasonic transducers and two aluminum cylinders whose lengths are 20 mm and 100 mm respectively. Based on this pitch-catch setup, the impedance and transient analysis are performed. Compared with the measured results, it is shown that the simulated results have good consistency. In addition, the conclusion can be drawn that the optimal excitation frequency for the pitch-catch setup is not necessarily the resonance frequency of ultrasonic transducers, because the resonance frequency is obtained under no load. The proposed PSpice model of the sandwiched piezoelectric transducer is more conveniently applied to combine with other circuits such as driving circuits, filters, amplifiers, and so on.

  8. Geometrical parameters influence on the stiffness of steel sandwich plates with web-core

    Science.gov (United States)

    Jiang, X. X.; Ji, H.; Rejab, M. R. M.; Zhang, S.; Ishak, M.; Zhu, L.

    2017-10-01

    Laser welded sandwich plates with web-core have found their position in the marine and land vehicles. To implement such design accurately, knowledge about the influence of geometrical parameters on the stiffness is necessary. In this paper, the over-hanging three points bending tests were performed on the laser welded web-core steel sandwich plate under quasi-static conditions, together with the finite element (FE) simulations. The following parameters were analysed: the thickness of the face plate, the spacing of the two core plates and the height of the core plates. The agreement between experimental measurements and FE results was considered to be good. It is shown that changes of these parameters can contribute to increase or decrease of the stiffness of web-core sandwich plate, but the height of the core plate has no effect on the shear stiffness as the spacing of the two core plates is known. There are linear, exponential and polynomial fitted relationships between the geometrical and the stiffness of the web-core sandwich plates.

  9. Research on Transient Liquid Phase Diffusion Bonding of Steel Sandwich Panels Under Small Plastic Deformation

    Science.gov (United States)

    Li, H.; Li, Z. X.

    2008-12-01

    Plastic deformation was newly introduced in transient liquid phase (TLP) diffusion bonding of steel sandwich panels. The effect of plastic deformation on bonding strength was investigated through lab experiments. It was assumed that three factors, including newly generated metal surface area, deformation heat, and lattice distortion, contribute to the acceleration of interface atoms diffusion and increase of diffusion coefficients. A numerical model of isothermal solidification time was developed for TLP bonding process under plastic deformation and applied to carbon steel sandwich panels bonding with copper interlayer. A reasonable isothermal solidification time was obtained when an effective diffusion coefficient was used. Based on lab experiments, the effects of plastic deformation on interlayer film thickness and isothermal solidification time were studied through theoretical calculation with the new model. The evolution of interlayer film thickness indicates a good agreement between the calculation and experimental measurement. The results show that the isothermal solidification time is obviously reduced due to the effect of plastic deformation. Furthermore, a new steel sandwich cooling panel for heat exchanger was fabricated by TLP diffusion bonding under 13.1% plastic deformation. The test results suggest that a steel sandwich panel of inequidistant fin structure can provide enhanced heat transfer efficiency.

  10. Foraging decisions of sandwich terns in the presence of kleptoparasitising gulls

    NARCIS (Netherlands)

    Stienen, EWM; Brenninkmeijer, A

    We studied prey selection of Sandwich Terns (Sterna sandvicensis) in the presence of kleptoparasitising Black-headed Gulls (Larus ridibundus) on Griend, Dutch Wadden Sea, from 1992 to 1998. Most often, gulls robbed larger sandeels rather than herring from terns. Provided that one parent attends the

  11. The Fluid-Solid Interaction Dynamics between Underwater Explosion Bubble and Corrugated Sandwich Plate

    Directory of Open Access Journals (Sweden)

    Hao Wang

    2016-01-01

    Full Text Available Lightweight sandwich structures with highly porous 2D cores or 3D (three-dimensional periodic cores can effectively withstand underwater explosion load. In most of the previous studies of sandwich structure antiblast dynamics, the underwater explosion (UNDEX bubble phase was neglected. As the UNDEX bubble load is one of the severest damage sources that may lead to structure large plastic deformation and crevasses failure, the failure mechanisms of sandwich structures might not be accurate if only shock wave is considered. In this paper, detailed 3D finite element (FE numerical models of UNDEX bubble-LCSP (lightweight corrugated sandwich plates interaction are developed by using MSC.Dytran. Upon the validated FE model, the bubble shape, impact pressure, and fluid field velocities for different stand-off distances are studied. Based on numerical results, the failure modes of LCSP and the whole damage process are obtained. It is demonstrated that the UNDEX bubble collapse jet local load plays a more significant role than the UNDEX shock wave load especially in near-field underwater explosion.

  12. A three-dimensional carbon nanotube/graphene sandwich and its application as electrode in supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Zhuangjun; Yan, Jun; Wei, Tong; Feng, Jing; Zhang, Milin [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin (China); Zhi, Linjie [National Center for Nanoscience and Technology of China, Beijing (China); Zhang, Qiang; Qian, Weizhong; Wei, Fei [Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing (China)

    2010-09-01

    Three-dimensional carbon nanotube/graphene sandwich structures with CNT pillars grown in between the graphene layers have been developed by chemical vapor deposition. The special structure endows the high-rate transportation of electrolyte ions and electrons throughout the electrode matrix, resulting in excellent electrochemical performance of this hybrid material. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  13. Compression strength of sandwich panels with sub-interface damage in the foam core

    NARCIS (Netherlands)

    Koysin, V.; Shipsha, Andrey; Skvortsov, Vitaly

    2009-01-01

    This paper addresses the effect of a local quasi-static indentation or a low-velocity impact on the residual strength of foam core sandwich panels subjected to edgewise compression. The damage is characterized by a local zone of crushed core accompanied by a residual dent in the face sheet.

  14. Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Zaid N.Z.M.

    2016-01-01

    Full Text Available The failure modes occurring in sandwich panels based on the corrugations of aluminium alloy, carbon fibre-reinforced plastic (CFRP and glass fibre-reinforced plastic (GFRP are analysed in this work. The fracture behaviour of these sandwich panels under compressive stresses is determined through a series of uniform lateral compression performed on samples with different cell wall thicknesses. Compression test on the corrugated-core sandwich panels were conducted using an Instron series 4505 testing machine. The post-failure examinations of the corrugated-core in different cell wall thickness were conducted using optical microscope. Load-displacement graphs of aluminium alloy, GFRP and CFRP specimens were plotted to show progressive damage development with five unit cells. Four modes of failure were described in the results: buckling, hinges, delamination and debonding. Each of these failure modes may dominate under different cell wall thickness or loading condition, and they may act in combination. The results indicate that thicker composites corrugated-core panels tend can recover more stress and retain more stiffness. This analysis provides a valuable insight into the mechanical behaviour of corrugated-core sandwich panels for use in lightweight engineering applications.

  15. Localized Effects in the Nonlinear Behavior of Sandwich Panels with a Transversely Flexible Core

    DEFF Research Database (Denmark)

    Frostig, Y.; Thomsen, Ole Thybo

    2005-01-01

    This paper presents the results of an investigation of the role of localized effects within the geometrically nonlinear domain on structural sandwich panels with a "compliant" core. Special emphasis is focused on the nonlinear response near concentrated loads and stiffened core regions. The adopt...

  16. Effects of face sheet damage on residual strength of GRP sandwich panels in naval ships

    DEFF Research Database (Denmark)

    Hayman, Brian; Echtermeyer, Andreas T.; Berggreen, Christian

    2010-01-01

    been obtained for a set of sandwich materials that are representative for the vessels in question. The face sheet materials are glass-reinforced plastics (GRP) with non-crimp fabrics and two different types of vinylester resin. The core materials are PVC foams. Impact damage by sharp and blunt objects...

  17. Vibration Characteristics of Axially Moving Titanium- Polymer Nanocomposite Faced Sandwich Plate Under Initial Tension

    Directory of Open Access Journals (Sweden)

    Ali Ghorbanpour Arani

    2017-07-01

    Full Text Available In the present research, vibration and instability of axially moving sandwich plate made of soft core and composite face sheets under initial tension is investigated. Single-walled carbon nano-tubes (SWCNTs are selected as a reinforcement of composite face sheets inside Poly methyl methacrylate (PMMA matrix. Higher order shear deformation theory (HSDT is utilized due to its accuracy of polynomial functions than other plate theories. Based on extended rule of mixture, the structural properties of composite face sheets are taken into consideration. Motion equations are obtained by means of Hamilton’s principle and solved analytically. Influences of various parameters such as axially moving speed, volume fraction of CNTs, pre-tension, thickness and aspect ratio of sandwich plate on the vibration characteristics of moving system are discussed in details. The results indicated that the critical speed of moving sandwich plate is strongly dependent on the volume fraction of CNTs. Therefore, the critical speed of moving sandwich plate can be improved by adding appropriate values of CNTs. The results of this investigation can be used in design and manufacturing of marine vessels and aircrafts.

  18. The Association between Membership in the Sandwich Generation and Health Behaviors: A Longitudinal Study

    Science.gov (United States)

    Chassin, Laurie; Macy, Jon T.; Seo, Dong-Chul; Presson, Clark C.; Sherman, Steven J.

    2010-01-01

    The current study examined the association between membership in the sandwich generation, defined as providing care to both children and parents or in-laws, and five health behaviors: checking the food label for health value when buying foods, using a seat belt, choosing foods based on health value, exercising regularly, and cigarette smoking.…

  19. Experimental and Numerical Study of Interface Crack Propagation in Foam Cored Sandwich Beams

    DEFF Research Database (Denmark)

    Berggreen, Carl Christian; Simonsen, Bo Cerup; Borum, Kaj Kvisgård

    2007-01-01

    This article deals with the prediction of debonding between core and face sheet in foam-cored sandwich structures. It describes the development, validation, and application of a FEM-based numerical model for the prediction of the propagation of debond damage. The structural mechanics is considered...

  20. Fracture Characterization of PVC Foam Core Sandwich Specimen Using the DCB-UBM Test Method

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    coupled with experimental validation is paramount to determine the fracture resistance of the face/core interface. In this paper, the test-rig exploiting the double cantilever beam with uneven bending moments (DCB-UBM) concept is used to determine the fracture toughness of PVC foam core sandwich...

  1. Electrochemical DNA sandwich assay with a lipase label for attomole detection of DNA

    DEFF Research Database (Denmark)

    Ferapontova, Elena; Hansen, Majken Nørgaard; Saunders, Aaron Marc

    2010-01-01

    A fast and sensitive electrochemical lipase-based sandwich hybridization assay for detection of attomole levels of DNA has been developed. A combination of magnetic beads, used for pre-concentration and bioseparation of the analyte with a lipase catalyst label allowed detection of DNA with a limit...

  2. On the Nature of Sandwiched Chromium Complexes in Exchanged alpha-Zirconium Phosphate

    Directory of Open Access Journals (Sweden)

    Claudia Maria de Oliveira Rapôso

    2002-10-01

    Full Text Available Layered alpha-zirconium hydrogenphosphate monohydrate was prepared by direct precipitation, exchanged with n-propylamine and then by chromium aquacomplexes. The solids were characterized by X-ray diffraction, mass spectrometry, infrared and UV-Visible spectroscopy. The results suggest that monomer complexes form extended, hydrogen bonded, sandwiched monolayers in the interlayer space.

  3. Buckling and Fracture Investigation of Debonded Sandwich Columns: An Experimental and Numerical Study

    DEFF Research Database (Denmark)

    Berggreen, Christian; Carlsson, Leif A.; Avilés, F.

    2008-01-01

    An experimental and numerical study of in-plane compression of foam core sandwich columns with implanted trough width face/core debond is presented. Experiments were conducted for columns with two different face thicknesses over different cores and debond lengths. The debonded region was monitore...

  4. Residual dent in locally loaded foam core sandwich structures – Analysis and use for NDI

    NARCIS (Netherlands)

    Koysin, V.; Shipsha, Andrey

    2008-01-01

    This paper addresses the residual denting in the face sheet and corresponding core damage in a locally loaded flat sandwich structure with foam core. The problem is analytically considered in the context of elastic bending of the face sheet accompanied by non-linear deformation of the crushed foam

  5. A More Sustainable Way for Producing RC Sandwich Panels On-Site and in Developing Countries

    Directory of Open Access Journals (Sweden)

    Lorenzo Graziani

    2017-03-01

    Full Text Available The purpose of this work is to assess if traditionally used welded connectors for joining the two skins of reinforced concrete (RC sandwich panels, used as structural walls and horizontal structural elements, can be substituted with bent ones. In this way, the scope of the effort is to reduce drastically the energy required during manufacturing, thus having a much more sustainable building product. Wire mesh on site production, in fact, requires a large amount of energy for the welding process, as stated by several Environmental Product Declaration (EPD. In addition, the production of sandwich panels with bent connectors requires a low level of automation and no qualified labor allowing the diffusion in developing countries. The procedures used to execute the work were both experimental and numerical. Structural performances were examined by testing full-scale sandwich panels under (axial and eccentric compression and flexural loads. Additionally, a Finite Element (FE study was developed to investigate and to optimize the dimension of welded mesh and the number of connectors. The major findings show that it is possible to substitute welded connectors with bent ones without compromising the structural performance of the tested RC sandwich panels, thus having a more sustainable way for producing these last ones.

  6. Buckling tests of sandwich cylindrical shells with and without cut-outs

    NARCIS (Netherlands)

    Bisagni, C.; Davidson, B.D.; Czabaj, M.W.; Ratcliffe, J.G.

    2016-01-01

    The results of buckling tests performed during the project DESICOS funded by the European Commission in the FP7 Programme are here presented. The tested structures are sandwich cylindrical shells that consist of reduced models of a component of the Ariane 5 launcher: the Dual Launch System. In

  7. Flexural behavior of sandwich panels with cellular wood, plywood stiffener/foam and thermoplastic composite core

    NARCIS (Netherlands)

    Labans, E.; Kalnins, Kaspars

    2017-01-01

    A series of experimental tests have been carried out on three types of novel sandwich panels mainly designed for application in lightweight mobile housing. Two types of the panels are manufactured entirely from wood-based materials while the third one presents a combination of plywood for surfaces

  8. Predicting the behaviour of a wide sandwich beam under pressure loading

    NARCIS (Netherlands)

    Davies, P.; Bigourdan, B.; Chaudot, P.; Choqueuse, D.; Ferreira, A.; Karjalainen, J.P.; Hildebrand, M.; Mustakangas, M.; Gaarder, R.; Carli, F.; Straalen, IJ.J. van; Sargent, J.P.; Adams, R.D.; Broughton, J.; Beevers, A.

    2000-01-01

    This paper presents results from analytical and finite elenent modelling of the response of a wide foam core sandwich beam to uniform pressure loading. New tests have been performed using an image analysis system which allows core shear strain mapping. Predicted panel displacenpnts and strains are

  9. Optimal Design of Multistage Two-Dimensional Cellular-Cored Sandwich Panel Heat Exchanger

    Directory of Open Access Journals (Sweden)

    Yongcun Zhang

    2014-08-01

    Full Text Available For a two-dimensional (2D cellular-cored sandwich panel heat exchanger, there exists an optimum cell size to achieve the maximum heat transfer with the prescribed pressure drop when the length is fixed and the two plates are isothermal. However, in engineering design, it is difficult to find 2D cellular materials with the ideal cell size because the cell size selected must be from those commercially available, which are discrete, not continuous. In order to obtain the maximum heat dissipation, an innovative design scheme is proposed for the sandwich panel heat exchanger which is divided into multiple stages in the direction of fluid flow where the 2D cellular material in each stage has a specific cell size. An analytical model is presented to evaluate the thermal performance of the multistage sandwich panel heat exchanger when all 2D cellular materials have the same porosity. Also, a new parameter named equivalent cell size (ECS is defined, which is dependent on the cell size and length of cellular material in all stages. Results show that the maximum heat dissipation design of the multistage sandwich panel heat exchanger can be converted to make the ECS equal to the optimal cell size of the single-stage exchanger.

  10. Features of fire and explosion safety of buildings from a sandwich of panels

    Directory of Open Access Journals (Sweden)

    Salymova Eugenia

    2017-01-01

    Full Text Available Recently in Russia about 100% of buildings of an oil and gas complex are built with use triplex a sandwich of panels (S.P. Almost all these buildings are explosive and increase in their exploisure-resistance requires application of easily thrown off or safety designs. A sandwich of the panel is an ideal applicant for a role of safety designs according to the weight characteristics. Except inertial properties extremely important characteristic is opening pressure. This size remains acritical in view of a variety of their sizes, thickness of metal sheets, a variety of their fastening to metal designs. In work opening pressure at explosion for a sandwich of panels of 2×1,2 m in size for various options of fastening is experimentally received. We suspect that load of one knot of fastening does not depend on the panel sizes, only on the knot device. For various ways of fastening design pressure of opening in case of a normal distribution of durability of clusters is defined. The criterion for assessment of effectiveness of the panels used as safety designs is received. This criterion determines the maximal pressure upon dive during opening. The received criterion confirms effectiveness a sandwich of panels as a safety design.

  11. A New Method of Impregnating PEl Sheets for the In-Situ Foaming of Sandwiches

    NARCIS (Netherlands)

    Provo Kluit, P.W.C.

    1998-01-01

    A new method is described to make foamable films for the production of in-situ foamed sandwiches. The method consists of placing a polymer film in a bath with a swelling agent and, when equilibrium swelling has been reached, placing the film in a bath with a second liquid. If the liquids are

  12. Job Burnout and Couple Burnout in Dual-Earner Couples in the Sandwiched Generation

    Science.gov (United States)

    Pines, Ayala Malach; Neal, Margaret B.; Hammer, Leslie B.; Icekson, Tamar

    2011-01-01

    We use existential theory as a framework to explore the levels of and relationship between job and couple burnout reported by dual-earner couples in the "sandwich generation" (i.e., couples caring both for children and aging parents) in a sample of such couples in Israel and the United States. This comparison enables an examination of…

  13. Counselling needs of sandwich students of University of Ado-Ekiti ...

    African Journals Online (AJOL)

    random sampling technique to select 500 respondents consisting of 404 Christians, 90 Muslims and 6 African Traditional religionists. The “Counselling Needs of Sandwich Students Questionnaire” (CNSWSQ) was administered to the respondents to collect relevant data. The t-test and Analysis of Variance (ANOVA) statistics ...

  14. Half-sandwich (η6-arene) ruthenium (II) chiral Schiff base ...

    Indian Academy of Sciences (India)

    sandwich (6-arene)ruthenium(II) chiral Schiff base complexes: Analysis of the diastereomeric mixtures in solution by 2D-NMR spectroscopy. Rakesh K Rath G A Nagana Gowda Akhil R Chakravarty. Inorganic and Analytical Volume 114 Issue 5 ...

  15. Benchmark Solution for Free Vibration of Moderately Thick Functionally Graded Sandwich Sector Plates on Two-Parameter Elastic Foundation with General Boundary Conditions

    Directory of Open Access Journals (Sweden)

    Haichao Li

    2017-01-01

    Full Text Available The free vibration analysis of moderately thick functionally graded (FG sector plates resting on two-parameter elastic foundation with general boundary conditions is presented via Fourier-Ritz method, which is composed of the modified Fourier series approach and the Ritz procedure. The material properties are assumed to vary continuously along the thickness according to the power-law distribution. The bilayered and single-layered functionally graded sector plates are obtained as the special cases of sandwich plates. The first-order shear deformation theory (FSDT is adopted to construct the theoretical model. Under current framework, regardless of boundary conditions, each displacement and each rotation of plates is represented by the modified Fourier series consisting of a standard Fourier cosine series and several closed-form auxiliary functions introduced to ensure and accelerate the convergence of the series representation. Then, the accurate solutions are obtained by using the Ritz procedure based on the energy function of sector plates. The present method shows good convergence, reliability, and accuracy by comprehensive investigation with some selected classical boundary conditions. Numerous new vibration results for moderately thick FG sandwich sector plates are provided. The effects of the elastic restraint parameters and so forth on free vibration characteristic of sector plates are presented.

  16. Behavior of sandwich panels subjected to bending fatigue, axial compression loading and in-plane bending

    Science.gov (United States)

    Mathieson, Haley Aaron

    This thesis investigates experimentally and analytically the structural performance of sandwich panels composed of glass fibre reinforced polymer (GFRP) skins and a soft polyurethane foam core, with or without thin GFRP ribs connecting skins. The study includes three main components: (a) out-of-plane bending fatigue, (b) axial compression loading, and (c) in-plane bending of sandwich beams. Fatigue studies included 28 specimens and looked into establishing service life (S-N) curves of sandwich panels without ribs, governed by soft core shear failure and also ribbed panels governed by failure at the rib-skin junction. Additionally, the study compared fatigue life curves of sandwich panels loaded under fully reversed bending conditions (R=-1) with panels cyclically loaded in one direction only (R=0) and established the stiffness degradation characteristics throughout their fatigue life. Mathematical models expressing fatigue life and stiffness degradation curves were calibrated and expanded forms for various loading ratios were developed. Approximate fatigue thresholds of 37% and 23% were determined for non-ribbed panels loaded at R=0 and -1, respectively. Digital imaging techniques showed significant shear contribution significantly (90%) to deflections if no ribs used. Axial loading work included 51 specimens and examined the behavior of panels of various lengths (slenderness ratios), skin thicknesses, and also panels of similar length with various rib configurations. Observed failure modes governing were global buckling, skin wrinkling or skin crushing. In-plane bending involved testing 18 sandwich beams of various shear span-to-depth ratios and skin thicknesses, which failed by skin wrinkling at the compression side. The analytical modeling components of axially loaded panels include; a simple design-oriented analytical failure model and a robust non-linear model capable of predicting the full load-displacement response of axially loaded slender sandwich panels

  17. Survival of Salmonella in Cookie and Cracker Sandwiches Containing Inoculated, Low-Water Activity Fillings.

    Science.gov (United States)

    Beuchat, Larry R; Mann, David A

    2015-10-01

    A study was done to determine the rate of inactivation of Salmonella in cookie and cracker snack sandwiches. Two cookie bases (chocolate and vanilla) and cheese crackers, along with high-sugar chocolate and peanut butter-based crème cookie fillings and peanut butter- and cheese-based cracker fillings, were obtained from commercial sources. Fillings and sandwiches containing fillings that had been dry- or wet-inoculated with Salmonella were stored at 25°C for 1, 6, 21, 35, 70, 112, and 182 days (6 months). At initial populations of 3.4 and 3.6 log CFU/g of cookie sandwiches containing chocolate crème and peanut butter crème fillings, respectively, Salmonella survived for at least 182 days; initially at 0.36 log CFU/g, the pathogen survived for at least 35 and 70 days. Initially at 2.9 and 3.4 log CFU/g of cracker sandwiches containing peanut butter- and cheese-based fillings, respectively, Salmonella survived for at least 182 and 112 days; initially at 0.53 log CFU/g, the pathogen survived for at least 6 and 35 days. Inactivation of Salmonella was more rapid in wet-inoculated peanut butter crème cookie filling than in dry-inoculated filling but was less affected by type of inoculum in peanut butter-based cracker filling. Chocolate cookie base (water activity [aw] 0.39) and chocolate crème filling (aw 0.30) components of sandwiches equilibrated to aw 0.38 within 15 days at 25°C; vanilla cookie base (aw 0.21) and peanut butter-based crème filling (aw 0.27) equilibrated to aw 0.24 between 50 and 80 days. Cheese cracker (aw 0.14) and peanut butter-based filling (aw 0.31) or cheese-based filling (aw 0.33) components of sandwiches equilibrated to aw 0.33 in 80 days. The ability of Salmonella to survive for at least 182 days in fillings of cookie and cracker sandwiches demonstrates a need to assure that filling ingredients do not contain the pathogen and that contamination does not occur during manufacture.

  18. Thermo-structural optimization of all-metallic prismatic sandwich panels

    Science.gov (United States)

    Valdevit, Lorenzo

    All-metallic sandwich panels with prismatic cores offer tremendous potential for thermostructural applications, due to their exceptional bending response together with the possibility of driving a fluid through their open cores, thus enabling active cooling. This thesis offers a complete thermo-mechanical characterization of prismatic panels with both corrugated and diamond cores, with main emphasis on geometric optimization. For the mechanical study, the panel geometry is analytically optimized for minimum weight under any combination of bending and transverse shear force. For longitudinal loadings (i.e. bending axis parallel to the core corrugation direction), corrugated panels show excellent performance, equivalent to the best concepts available; for transverse loadings (i.e. bending axis perpendicular to the corrugation direction), this goal is achieved with diamond core designs. Failure maps are constructed based on the analytical model to provide easy visualization of the failure modes and allow immediate identification of optimal designs. Such maps are used to design a selected number of experiments, with the three-fold goal of (i) validating the analytical model, (ii) exploring the behavior subsequent to failure initiation (thus assessing the robustness of the chosen designs), and (iii) check the reliability of numerical simulations in capturing limit loads and deformation modes. Good agreement is achieved among analytical, computational and experimental results. In order to assess the active cooling performance of prismatic panels, a scenario is envisioned where a uniform heat flux is impinging on one face, with the rest of the panel being thermally insulated; under these conditions, all the heat flux is transferred to a cooling fluid flowing through the core channels. At any given level of the pressure drop, the panel geometry is optimized for maximum transferred heat flux subject to a temperature constraint on the structure. Although very large optimal

  19. Construction Management.

    Science.gov (United States)

    Abbott, James F.

    This article provides a detailed discussion of a team approach to building that involves a construction manager, an architect, and a contractor. Bidding methods are outlined; the major components in construction management -- value engineering and fast track scheduling -- and the use of performance specifications are discussed. The construction…

  20. Superstring construction

    CERN Document Server

    1989-01-01

    The book includes a selection of papers on the construction of superstring theories, mainly written during the years 1984-1987. It covers ten-dimensional supersymmetric and non-supersymmetric strings, four-dimensional heterotic strings and four-dimensional type-II strings. An introduction to more recent developments in conformal field theory in relation to string construction is provided.

  1. ' CONSTRUCTION INDUSTRY

    African Journals Online (AJOL)

    CONSTRUCTION INDUSTRY. N. Aniekwu. Civil Engineering Department,. University of Benin,. Benin City. Nigeria. ABSTRACT. This paper deals with safety in the Nigerian construction industry. Three aspects of safety were identified as paramount in the study and include accident causations, accident prevention and the.

  2. A highly sensitive sandwich ELISA for the determination of glycomacropeptide to detect liquid whey in raw milk.

    Science.gov (United States)

    Chávez, Norma A; Jauregui, Juan; Palomares, Laura A; Macías, Karla E; Jiménez, Mariela; Salinas, Eva

    2012-03-01

    Milk processing industries and distributors have problems with adulteration of liquid milk by the addition of bovine cheese whey. Recently, the detection of fraudulent manipulation of milk with whey has focused on the identification of glycomacropeptide (GMP). Current non-immunological methods to detect GMP in dairy products are expensive and time-consuming or have low sensitivity. In this study, a novel sandwich enzyme-linked immunosorbent assay (ELISA) for the detection and quantification of whey in raw milk was developed, using a polyclonal rabbit anti-GMP antibody. Calibration curves were constructed by analyzing raw milk standards containing different known concentrations of liquid cheese whey (0.02-20%). The method had a detection limit of 0.047% (v/v) and a quantification limit of 0.14% (v/v). The antibody showed high specificity and no cross-reaction with milk components (other than κ-casein) and was successful in detecting GMP in dairy commercial products. The recovery ratio was between 95.62% and 113.88% for all matrices tested. The intra-assay and interassay coefficients of variation were <6% and <7%, respectively. Finally, it can be stored for 3 months in the form of a ready-to-use kit, while maintaining its accuracy and reproducibility.

  3. A novel double antibody sandwich-lateral flow immunoassay for the rapid and simple detection of hepatitis C virus.

    Science.gov (United States)

    Xiang, Tingxiu; Jiang, Zheng; Zheng, Jian; Lo, Chaoyu; Tsou, Harry; Ren, Guosheng; Zhang, Jun; Huang, Ailong; Lai, Guoqi

    2012-11-01

    The objective of this study was to screen for antigens of the hepatitis C virus (HCV) to establish a new double antibody sandwich-lateral flow immunoassay (DAS-LFIA) method for testing the presence of anti-HCV antibodies in human serum or plasma. A series of different recombinant HCV proteins in Escherichia coli cells were constructed, expressed, purified and the new DAS-LFIA strip was developed. The sensitivity and specificity of new the DAS-LFIA strip were evaluated by detecting 23 HCV-positive sera, a set of quality control references for anti-HCV detection that contain known amounts of anti-HCV antibodies, and 8 HCV-negative sera. A total of 300 clinical serum samples was examined by both the new DAS-LFIA strip and enzyme-linked immunosorbent assay (ELISA). Data were analyzed using SPSS 11.5 software. The sensitivity and specificity of the new DAS-LFIA strip were 100%. The lowest test line of the HCV DAS-LFIA strips was 2 NCU/ml. Additionally, the concordance between the new DAS-LFIA strip and ELISA methods was 94.33%. In conclusion, our new testing method is rapid, simple, sensitive and specifically detects the presence of anti-HCV antibodies in human serum or plasma. Therefore, it may be used for monitoring HCV.

  4. Fabrication of Au/graphene oxide/Ag sandwich structure thin film and its tunable energetics and tailorable optical properties

    Directory of Open Access Journals (Sweden)

    Ruijin Hong

    2017-01-01

    Full Text Available Au/graphene oxide/Ag sandwich structure thin film was fabricated. The effects of graphene oxide (GO and bimetal on the structure and optical properties of metal silver films were investigated by X-ray diffraction (XRD, optical absorption, and Raman intensity measurements, respectively. Compared to silver thin film, Au/graphene oxide/Ag sandwich structure composite thin films were observed with wider optical absorption peak and enhanced absorption intensity. The Raman signal for Rhodamine B molecules based on the Au/graphene oxide/Ag sandwich nanostructure substrate were obviously enhanced due to the bimetal layer and GO layer with tunable absorption intensity and fluorescence quenching effects.

  5. Modelling Constructs

    DEFF Research Database (Denmark)

    Kindler, Ekkart

    2009-01-01

    , these notations have been extended in order to increase expressiveness and to be more competitive. This resulted in an increasing number of notations and formalisms for modelling business processes and in an increase of the different modelling constructs provided by modelling notations, which makes it difficult...... to compare modelling notations and to make transformations between them. One of the reasons is that, in each notation, the new concepts are introduced in a different way by extending the already existing constructs. In this chapter, we go the opposite direction: We show that it is possible to add most...... constructs and how they can be combined with more advanced constructs. Second, it will help combining different modelling notations with each other. Note that, though we introduce a notation for blocks in this chapter, we are not so much interested in promoting this notation here. The notation should just...

  6. Analysis of Thick Sandwich Shells with Embedded Ceramic Tiles

    Science.gov (United States)

    Davila, Carlos G.; Smith, C.; Lumban-Tobing, F.

    1996-01-01

    The Composite Armored Vehicle (CAV) is an advanced technology demonstrator of an all-composite ground combat vehicle. The CAV upper hull is made of a tough light-weight S2-glass/epoxy laminate with embedded ceramic tiles that serve as armor. The tiles are bonded to a rubber mat with a carefully selected, highly viscoelastic adhesive. The integration of armor and structure offers an efficient combination of ballistic protection and structural performance. The analysis of this anisotropic construction, with its inherent discontinuous and periodic nature, however, poses several challenges. The present paper describes a shell-based 'element-layering' technique that properly accounts for these effects and for the concentrated transverse shear flexibility in the rubber mat. One of the most important advantages of the element-layering technique over advanced higher-order elements is that it is based on conventional elements. This advantage allows the models to be portable to other structural analysis codes, a prerequisite in a program that involves the computational facilities of several manufacturers and government laboratories. The element-layering technique was implemented into an auto-layering program that automatically transforms a conventional shell model into a multi-layered model. The effects of tile layer homogenization, tile placement patterns, and tile gap size on the analysis results are described.

  7. Clay Nanocomposite/Aerogel Sandwich Structures for Cryotanks

    Science.gov (United States)

    Miller, Sandi; Leventis, Nicholas; Johnston, J. Chris; Meador, Michael

    2006-01-01

    GRC research has led to the development of epoxy-clay nanocomposites with 60-70% lower gas permeability than the base epoxy resin. Filament wound carbon fiber reinforced tanks made with this nanocomposite had a five-fold lower helium leak rate than the corresponding tanks made without clay. More recent work has produced new composites with more than a 100-fold reduction in helium permeability. Use of these advanced, high barrier composites would eliminate the need for a liner in composite cryotanks, thereby simplifying construction and reducing propellant leakage. Aerogels are attractive materials for use as cryotank insulation because of their low density and low thermal conductivity. However, aerogels are fragile and have poor environmental stability, which have limited their use to certain applications in specialized environments (e.g., in certain types of nuclear reactors as Cerenkov radiation detectors, and as thermal insulators aboard space rovers on Mars). New GRC developed polymer crosslinked aerogels (X-Aerogels) retain the low density of conventional aerogels, but they demonstrate a 300-fold increase in their mechanical strength. Currently, our strongest materials combine a density of approx. 0.45 g/cc, a thermal conductivity of approx. 0.04 W/mK and a compressive strength of 185 MPa. Use of these novel aerogels as insulation materials/structural components in combination with the low permeability of epoxy-clay nanocomposites could significantly reduce cryotank weight and improve durability.

  8. Compression Loss Tangent of Micro-Cell Polyurethane Foams in which Bonding Tape Made of Acryl Foam is Sandwiched

    National Research Council Canada - National Science Library

    Adachi, Hiromasa

    2008-01-01

      Temperature and frequency characteristics of compression loss tangent of micro-cell polyurethane foams in which bonding tape made by acryl foam was sandwiched, were investigated by dynamic viscoelastic measurements...

  9. Analysis of an Aircraft Honeycomb Sandwich Panel with Circular Face Sheet/Core Disbond Subjected to Ground-Air Pressurization

    Science.gov (United States)

    Rinker, Martin; Krueger, Ronald; Ratcliffe, James

    2013-01-01

    The ground-air pressurization of lightweight honeycomb sandwich structures caused by alternating pressure differences between the enclosed air within the honeycomb core and the ambient environment is a well-known and controllable loading condition of aerospace structures. However, initial face sheet/core disbonds intensify the face sheet peeling effect of the internal pressure load significantly and can decrease the reliability of the sandwich structure drastically. Within this paper, a numerical parameter study was carried out to investigate the criticality of initial disbonds in honeycomb sandwich structures under ground-air pressurization. A fracture mechanics approach was used to evaluate the loading at the disbond front. In this case, the strain energy release rate was computed via the Virtual Crack Closure Technique. Special attention was paid to the pressure-deformation coupling which can decrease the pressure load within the disbonded sandwich section significantly when the structure is highly deformed.

  10. Polarized white light from LEDs using remote-phosphor layer sandwiched between reflective polarizer and light-recycling dichroic filter.

    Science.gov (United States)

    Oh, Ji Hye; Yang, Su Ji; Do, Young Rag

    2013-09-09

    This study introduces an efficient polarized, white phosphor-converted, light-emitting diode (pc-LED) using a remote phosphor film sandwiched between a reflective polarizer film (RPF) and a short-wavelength pass dichroic filter (SPDF). The on-axis brightness of polarized white light emission of a RPF/SPDF-sandwiched phosphor film over a blue LED, showed greater recovery than that of a conventional unpolarized remote phosphor film over blue LED, due to the recycling effect of yellow light from an SPDF. The relative luminous efficacy of an RPF/SPDF-sandwiched phosphor film was made 1.40 times better by adding an SPDF on the backside of an RPF-capped phosphor film. A polarization ratio of 0.84 was demonstrated for a white LED with an RPF/SPDF-sandwiched phosphor film, in good agreement with the measured results from the RPF-only sample.

  11. Numerical Analysis of Dynamic Response of Corrugated Core Sandwich Panels Subjected to Near-Field Air Blast Loading

    Directory of Open Access Journals (Sweden)

    Pan Zhang

    2014-01-01

    Full Text Available Three-dimensional fully coupled simulation is conducted to analyze the dynamic response of sandwich panels comprising equal thicknesses face sheets sandwiching a corrugated core when subjected to localized impulse created by the detonation of cylindrical explosive. A large number of computational cases have been calculated to comprehensively investigate the performance of sandwich panels under near-field air blast loading. Results show that the deformation/failure modes of panels depend strongly on stand-off distance. The beneficial FSI effect can be enhanced by decreasing the thickness of front face sheet. The core configuration has a negligible influence on the peak reflected pressure, but it has an effect on the deflection of a panel. It is found that the benefits of a sandwich panel over an equivalent weight solid plate to withstand near-field air blast loading are more evident at lower stand-off distance.

  12. A Finite Element Analysis for Predicting the Residual Compression Strength of Impact-Damaged Sandwich Panels

    Science.gov (United States)

    Ratcliffe, James G.; Jackson, Wade C.

    2008-01-01

    A simple analysis method has been developed for predicting the residual compression strength of impact-damaged sandwich panels. The method is tailored for honeycomb core-based sandwich specimens that exhibit an indentation growth failure mode under axial compression loading, which is driven largely by the crushing behavior of the core material. The analysis method is in the form of a finite element model, where the impact-damaged facesheet is represented using shell elements and the core material is represented using spring elements, aligned in the thickness direction of the core. The nonlinear crush response of the core material used in the analysis is based on data from flatwise compression tests. A comparison with a previous analysis method and some experimental data shows good agreement with results from this new approach.

  13. A Finite Element Analysis for Predicting the Residual Compressive Strength of Impact-Damaged Sandwich Panels

    Science.gov (United States)

    Ratcliffe, James G.; Jackson, Wade C.

    2008-01-01

    A simple analysis method has been developed for predicting the residual compressive strength of impact-damaged sandwich panels. The method is tailored for honeycomb core-based sandwich specimens that exhibit an indentation growth failure mode under axial compressive loading, which is driven largely by the crushing behavior of the core material. The analysis method is in the form of a finite element model, where the impact-damaged facesheet is represented using shell elements and the core material is represented using spring elements, aligned in the thickness direction of the core. The nonlinear crush response of the core material used in the analysis is based on data from flatwise compression tests. A comparison with a previous analysis method and some experimental data shows good agreement with results from this new approach.

  14. The interfacial fracture behavior of foam core composite sandwich structures by a viscoelastic cohesive model

    Science.gov (United States)

    Sun, Shiyong; Chen, Haoran

    2011-08-01

    A sandwich beam model consisting of two face sheets and a foam core bonded by a viscoelastic adhesive layer is considered in order to investigate interfacial fracture behavior. Firstly, a cohesive zone model in conjunction with a Maxwell element in parallel, or with a Kelvin element in series, respectively, is employed to describe the characteristics of viscoelasticity for the adhesive layer. The models can be implemented into the implicit finite element code. Next, the parametric study shows that the influences of loading rates on the cohesive zone energy and strength are quite different for different models. Finally, a sandwich double cantilever beam model is adopted to simulate the interface crack growth between the face sheet and core. Numerical examples are presented for various loading rates to demonstrate the efficacy of the rate-dependent cohesive models.

  15. Torsional guided wave-based debonding detection in honeycomb sandwich beams

    Science.gov (United States)

    Zhu, Kaige; Qing, Xinlin P.; Liu, Bin

    2016-11-01

    Debonding is one of the most dangerous damages in honeycomb sandwich structures, which causes stiffness reduction and is invisible from the surface. Guided wave-based non-destructive evaluation is a promising approach with high sensitivity and high efficiency for debonding detection. A torsional guided wave method is proposed to inspect debonding damage in honeycomb sandwich beams, which is proved to be better in damage location for the beams in the paper than the flexural wave used before. The honeycomb heterogeneity effect on the interaction between guided waves and debonding are first investigated by finite element methods. Then the ability of torsional waves to determine debonding locations and sizes is discussed in detail. Finally, in order to verify the proposed method, experiments are carried out to inspect debonding damage with two sizes.

  16. Metal rings and discs Matlab/Simulink 3D model for ultrasonic sandwich transducer design

    Directory of Open Access Journals (Sweden)

    Jovanović I.

    2012-01-01

    Full Text Available Metal-endings are integral part of different ultrasonic sandwich transducers. In this paper a new Matlab/Simulink 3D model of the finite metal rings and discs of various dimensions is realized. With this model, which describes both the thickness and the radial resonant modes, and the coupling between them, mechanical impedance of the sample can be easily computed. Resonance frequency-length curves for rings and disks with various materials and for different selected dimensions are given. Also, comparisons of the different approaches in determining of their resonant frequencies are shown. The proposed Matlab/Simulink model requires simpler implementation than other analytical models. That enabled modifying of 1D theory and simplified modelling and projecting of the ultrasonic sandwich transducers with short-endings. Finally, the computed and experimental results are compared. [Projekat Ministarstva nauke Republike Srbije, br. TR33035, br. III43014 i br. OI172057

  17. Vibroacoustic Characterization of Corrugated-Core and Honeycomb-Core Sandwich Panels

    Science.gov (United States)

    Allen, Albert; Schiller, Noah

    2016-01-01

    The vibroacoustic characteristics of two candidate launch vehicle fairing structures, corrugated- core and honeycomb-core sandwich designs, were studied. The study of these structures has been motivated by recent risk reduction efforts focused on mitigating high noise levels within the payload bays of large launch vehicles during launch. The corrugated-core sandwich concept is of particular interest as a dual purpose structure due to its ability to harbor resonant noise control systems without appreciably adding mass or taking up additional volume. Specifically, modal information, wavelength dispersion, and damping were determined from a series of vibrometer measurements and subsequent analysis procedures carried out on two test panels. Numerical and analytical modeling techniques were also used to assess assumed material properties and to further illuminate underlying structural dynamic aspects. Results from the tests and analyses described herein may serve as a reference for additional vibroacoustic studies involving these or similar structures.

  18. Thermal performance of capillary micro tubes integrated into the sandwich element made of concrete

    DEFF Research Database (Denmark)

    Mikeska, Tomas; Svendsen, Svend

    2013-01-01

    The thermal performance of radiant heating and cooling systems (RHCS) composed of capillary micro tubes (CMT) integrated into the inner plate of sandwich elements made of High Performance Concrete (HPC) was investigated in the article. Temperature distribution in HPC elements around integrated CMT...... was studied. Thermal heat flux on the inner surface of HPC element was carefully investigated. Calculations were carried out for different temperatures of the circulating fluid, different spacing between CMT and different thicknesses of the inner HPC layer covering the CMT. This paper shows that CMT...... integrated into the thin plate of sandwich element made of HPC can supply the energy needed for heating and cooling. The investigations were conceived as a low temperature concept, where the difference between the temperature of circulating fluid and air in the room was kept in range of 1 to 4°C. © (2013...

  19. High-Fidelity Modeling for Health Monitoring in Honeycomb Sandwich Structures

    Science.gov (United States)

    Luchinsky, Dimitry G.; Hafiychuk, Vasyl; Smelyanskiy, Vadim; Tyson, Richard W.; Walker, James L.; Miller, Jimmy L.

    2011-01-01

    High-Fidelity Model of the sandwich composite structure with real geometry is reported. The model includes two composite facesheets, honeycomb core, piezoelectric actuator/sensors, adhesive layers, and the impactor. The novel feature of the model is that it includes modeling of the impact and wave propagation in the structure before and after the impact. Results of modeling of the wave propagation, impact, and damage detection in sandwich honeycomb plates using piezoelectric actuator/sensor scheme are reported. The results of the simulations are compared with the experimental results. It is shown that the model is suitable for analysis of the physics of failure due to the impact and for testing structural health monitoring schemes based on guided wave propagation.

  20. Fracture Mechanics Analysis of Reinforced DCB Sandwich Debond Specimen Loaded by Moments

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    2018-01-01

    Analytical expressions for the energy release rate and mode-mixity phase angle are derived for a sandwich composite double-cantilever beam fracture specimen with the face sheets reinforced by stiff plates. The sandwich beam is considered symmetric, with identical top and bottom facesheets. Only...... a pure moment loading is considered. The J-integral coupled with laminate beam theory is employed to derive closed-form expression for the energy releaserate in terms of the applied moments, geometry, and material properties .A scalar quantityωis obtained to express the mode-mixity phase angle....... It is shown that ω is independent of the applied loading conditions. The value of ω is found to be moderately influenced by reinforcement thicknesses....

  1. Weld nugget formation in resistance spot welding of new lightweight sandwich material

    DEFF Research Database (Denmark)

    Sagüés Tanco, J.; Nielsen, Chris Valentin; Chergui, Azeddine

    2015-01-01

    Weldability of a new lightweight sandwich material, LITECOR®, by resistance spot welding is analyzed by experiments and numerical simulations. The spot welding process is accommodated by a first pulse squeezing out the non-conductive polymer core of the sandwich material locally to allow metal......–metal contact. This is facilitated by the use of a shunt tool and is followed by a second pulse for the actual spot welding and nugget formation. A weldability lobe in the time-current space of the second pulse reveals a process window of acceptable size for automotive assembly lines. Weld growth curves...... are presented together with results of numerical simulations made in the finite element computer program SORPAS® 3D, which is based on an electro-thermo-mechanical formulation. The numerical models are presented together with the specific modeling conditions leading to numerical simulations in good agreement...

  2. Fracture Testing of Honeycomb Core Sandwich Composites Using the DCB-UBM Test

    DEFF Research Database (Denmark)

    Saseendran, Vishnu; Berggreen, Christian; Carlsson, Leif A.

    2015-01-01

    of Linear Elastic Fracture Mechanics (LEFM). The Double Cantilever Beam subjected to Uneven Bending Moments (DCB-UBM) test set-up, which was introduced by Sørensen.et.al [1], circumvents any dependency of the pre-crack length in calculation of Gc. The new test setup is based on rotary actuators which...... of the face/core interface. In this paper, a novel test-rig exploiting the double cantilever beam-uneven bending moments (DCB-UBM) concept is used to determine the fracture toughness of aircraft type honeycomb core sandwich composites as a function of the phase angle (mode-mixity), within the framework...... are able to slide on rails to follow the specimen’s deformation kinematics when subjected to pure rotations, as schematically shown in Figure 1. The robustness of the new test rig is demonstrated by performing pure mode-I fracture characterization of the face/core interface of a typical aircraft sandwich...

  3. Single and Multisite Impact Response of S2-Glass/Epoxy Balsa Wood Core Sandwich Composites

    Science.gov (United States)

    Vaidya, Uday K.; Deka, Lakshya J.

    Impact damage reduces the structural integrity and load bearing capacity of a composite structure. Most studies on high velocity impact damage have been limited to single-site impacts, with little consideration given to the effect of cumulative damage from multiple impacts. In this study, the impact damage response of S2-glass/epoxy balsa wood core sandwich composite is evaluated experimentally and supported by finite element modeling for single-site and multi-site impacts from 0.30 and 0.50 caliber spherical projectiles. During high velocity impact, a composite laminate undergoes progressive damage;hence a progressive failure model based on Hashin's criteria is used to predict failure. When subjected to multi-site impact loading, a sandwich composite structure exhibits synergistic and cumulative damage causing extensive fiber breakage, matrix cracking and delamination. An excellent correlation between experimental and numerical results is obtained.

  4. It All Starts with a Sandwich: Identification of Sialidases with Trans-Glycosylation Activity

    DEFF Research Database (Denmark)

    Nordvang, Rune Thorbjørn; Nyffenegger, Christian; Holck, Jesper

    2016-01-01

    Sialidases (3.2.1.18) may exhibit trans-sialidase activity to catalyze sialylation of lactose if the active site topology is congruent with that of the Trypanosoma cruzi trans-sialidase (EC 2.4.1.-). The present work was undertaken to test the hypothesis that a particular aromatic sandwich...... structure of two amino acids proximal to the active site of the T. cruzi trans-sialidase infers trans-sialidase activity. On this basis, four enzymes with putative trans-sialidase activity were identified through an iterative alignment from 2909 native sialidases available in GenBank, which were cloned...... milk oligosaccharide 3'-sialyllactose as well as the novel trans-sialylation product 3-sialyllactose using casein glycomacropeptide as sialyl donor and lactose as acceptor. The findings corroborated that Tyr119 and Trp312 in the T. cruzi trans-sialidase are part of an aromatic sandwich structure...

  5. A Novel Counter Sheet-flow Sandwich Cell Culture Device for Mammalian Cell Growth in Space

    Science.gov (United States)

    Sun, Shujin; Gao, Yuxin; Shu, Nanjiang; Tang, Zemei; Tao, Zulai; Long, Mian

    2008-08-01

    Cell culture and growth in space is crucial to understand the cellular responses under microgravity. The effects of microgravity were coupled with such environment restrictions as medium perfusion, in which the underlying mechanism has been poorly understood. In the present work, a customer-made counter sheet-flow sandwich cell culture device was developed upon a biomechanical concept from fish gill breathing. The sandwich culture unit consists of two side chambers where the medium flow is counter-directional, a central chamber where the cells are cultured, and two porous polycarbonate membranes between side and central chambers. Flow dynamics analysis revealed the symmetrical velocity profile and uniform low shear rate distribution of flowing medium inside the central culture chamber, which promotes sufficient mass transport and nutrient supply for mammalian cell growth. An on-orbit experiment performed on a recovery satellite was used to validate the availability of the device.

  6. Perpendicularly magnetized Co20Fe60B20 layer sandwiched between Au with low Gilbert damping

    Science.gov (United States)

    Kuświk, Piotr; Głowiński, Hubert; Coy, Emerson; Dubowik, Janusz; Stobiecki, Feliks

    2017-11-01

    Nowadays, the CoFeB thin layered film is intensively studied because of its potential applications in spintronic devices, especially devices based on spin-transfer torque phenomena. Hitherto, it has been shown that CoFeB may possess perpendicular magnetic anisotropy (PMA) when it is sandwiched between different layers (e.g. MgO, Pt, Pd, Ta, W). However, there is no experimental evidence that CoFeB, sandwiched between Au layers, has strong PMA. Moreover, in comparison with other noble metals, Au-based film systems exhibit the smallest spin pumping effect, which provides the main contribution to the damping in thin films in contact with heavy metals. Therefore, Au/CoFeB/Au may be a good candidate for future applications, where perpendicular magnetic anisotropy and low damping are required. Here, we show that PMA and low damping can be achieved in a Au/CoFeB/Au system without annealing.

  7. Analysis on spectra of hydroacoustic field in sonar cavity of the sandwich elastic wall structure

    Science.gov (United States)

    Xuetao, W.; Rui, H.; Weike, W.

    2017-09-01

    In this paper, the characteristics of the mechanical self - noise in sonar array cavity are studied by using the elastic flatbed - filled rectangular cavity parameterization model. Firstly, the analytic derivation of the vibration differential equation of the single layer, sandwich elastic wall plate structure and internal fluid coupling is carried out, and the modal method is used to solve it. Finally, the spectral characteristics of the acoustic field of rectangular cavity of different elastic wallboard materials are simulated and analyzed, which provides a theoretical reference for the prediction and control of sonar mechanical self-noise. In this paper, the sandwich board as control inside the dome background noise of a potential means were discussed, the dome background noise of qualitative prediction analysis and control has important theoretical significance.

  8. Failure of uniformly compression loaded debond damaged sandwich panels — An experimental and numerical study

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Quispitupa, Amilcar; Berggreen, Christian

    2012-01-01

    This paper deals with the failure of compression-loaded sandwich panels with an implanted circular face/core debond. Uniform compression tests were conducted on intact sandwich panels with three different types of core material (H130, H250 and PMI) and on similar panels with circular face....../core debonds having three different diameters. The strains and out-of-plane displacements of the panel surface were monitored using the digital image correlation technique. Mixed mode bending tests were conducted to determine the fracture toughness of the face/core interface of the panels. Finite element...... analysis and linear elastic fracture mechanics were employed to determine the critical buckling load and compression strength of the panels. Modeling approaches and failure criteria are discussed. Numerically determined crack propagation loads in most of the cases show a fair agreement with experimental...

  9. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    Energy Technology Data Exchange (ETDEWEB)

    McGugan, M.; Soerensen, Bent F.; Oestergaard, R.; Bech, T.

    2006-12-15

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material is presented. The contribution of the acoustic emission monitoring technique in defining different failure modes identified during the testing is discussed. The development of in-situ structural monitoring and control systems is considered. (au)

  10. A novel sandwich-type polyoxometalate compound with visible-light photocatalytic H2 evolution activity.

    Science.gov (United States)

    Zhang, Zhenyu; Lin, Qipu; Zheng, Shou-Tian; Bu, Xianhui; Feng, Pingyun

    2011-04-07

    A tin(II) tungstosilicate derivative K(11)H[Sn(4)(SiW(9)O(34))(2)]·25H(2)O with four sandwiched Sn(2+) cations was prepared by reaction of SnCl(2), KCl and Na(10)[α-SiW(9)O(34)]·xH(2)O. Visible-light photocatalytic H(2) evolution activity was observed with Pt nanoparticles as co-catalyst and methanol as sacrificial agent.

  11. Fatigue behavior of wood-fiber-based tri-axial engineered sandwich composite panels (ESCP)

    Science.gov (United States)

    Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

    2015-01-01

    The static and fatigue bending behavior of wood-fiber-based tri-axial engineered sandwich composite panels (ESCP) has been investigated by four-point bending tests. Fatigue panels and weakened panels (wESCP) with an initial interface defect were manufactured for the fatigue tests. Stress σ vs. number of cycles curves (S-N) were recorded under the different stress...

  12. Anomalous photoluminescence thermal quenching of sandwiched single layer MoS_2

    KAUST Repository

    Tangi, Malleswararao

    2017-09-22

    We report an unusual thermal quenching of the micro-photoluminescence (µ-PL) intensity for a sandwiched single-layer (SL) MoS2. For this study, MoS2 layers were chemical vapor deposited on molecular beam epitaxial grown In0.15Al0.85N lattice matched templates. Later, to accomplish air-stable sandwiched SL-MoS2, a thin In0.15Al0.85N cap layer was deposited on the MoS2/In0.15Al0.85N heterostructure. We confirm that the sandwiched MoS2 is a single layer from optical and structural analyses using µ-Raman spectroscopy and scanning transmission electron microscopy, respectively. By using high-resolution X-ray photoelectron spectroscopy, no structural phase transition of MoS2 is noticed. The recombination processes of bound and free excitons were analyzed by the power-dependent µ-PL studies at 77 K and room temperature (RT). The temperature-dependent micro photoluminescence (TDPL) measurements were carried out in the temperature range of 77 – 400 K. As temperature increases, a significant red-shift is observed for the free-exciton PL peak, revealing the delocalization of carriers. Further, we observe unconventional negative thermal quenching behavior, the enhancement of the µ-PL intensity with increasing temperatures up to 300K, which is explained by carrier hopping transitions that take place between shallow localized states to the band-edges. Thus, this study renders a fundamental insight into understanding the anomalous thermal quenching of µ-PL intensity of sandwiched SL-MoS2.

  13. Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation

    Directory of Open Access Journals (Sweden)

    D. Tumino

    2014-10-01

    Full Text Available In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this structure with an orthotropic equivalent thick plate that reproduces the in plane and out of plane behaviour of the original geometry. Different validation procedures have been implemented to verify the quality of the proposed method. At first a comparison has been performed between the analytical model and the original unit cell modelled with a Finite Element mesh. Elementary loading conditions are reproduced and results are compared. Once the reliability of the analytical model was assessed, this homogenised model was implemented within the formulation of a shell finite element. The goal of this step is to simplify the FE analysis of complex structures made of corrugated core sandwiches; in fact, by using the homogenised element, the global response of a real structure can be investigated only with the discretization of its mid-surface. Advantages are mainly in terms of time to solution saving and CAD modelling simplification. Last step is then the comparison between this FE model and experiments made on sandwich beams and panels whose skins and corrugated cores are made of orthotropic cross-ply GRP laminates. Good agreement between experimental and numerical results confirms the validity of the proposed model.

  14. EVALUATION OF THE STRUCTURAL BEHAVIOR OF ALUMINUM HONEYCOMB SANDWICH PANELS FOR MICROSATELLITES

    OpenAIRE

    Silva, Hiterson de Oliveira; Andrianov, Artem; Barcelos Júnior, Manuel Nascimento Dias

    2017-01-01

      Abstract. This work has as target the analysis of honeycomb structures by applying analytical models and numerical simulation that employ different finite element approaches: solid model for panel with equivalent honeycomb core properties, solid model of the honeycomb core and faces, and surface model of the honeycomb core and faces. There is also the standard test method for determination of the bending and shear properties of honeycomb sandwich samples whose results are employed for valid...

  15. Construction safety

    CERN Document Server

    Li, Rita Yi Man

    2013-01-01

    A close-to-ideal blend of suburb and city, speedy construction of towers of Babylon, the sparkling proportion of glass and steel buildings’ facade at night showcase the wisdom of humans. They also witness the footsteps, sweats and tears of architects and engineers. Unfortunately, these signatures of human civilizations are swathed in towering figures of construction accidents. Fretting about these on sites, different countries adopt different measures on sites. This book firstly sketches the construction accidents on sites, followed by a review on safety measures in some of the developing countries such as Bermuda, Egypt, Kuwait and China; as well as developed countries, for example, the United States, France and Singapore. It also highlights the enormous compensation costs with the courts’ experiences in the United Kingdom and Hong Kong.

  16. Experimental Tests on the Composite Foam Sandwich Pipes Subjected to Axial Load

    Science.gov (United States)

    Li, Feng; Zhao, QiLin; Xu, Kang; Zhang, DongDong

    2015-12-01

    Compared to the composite thin-walled tube, the composite foam sandwich pipe has better local flexural rigidity, which can take full advantage of the high strength of composite materials. In this paper, a series of composite foam sandwich pipes with different parameters were designed and manufactured using the prefabricated polyurethane foam core-skin co-curing molding technique with E-glass fabric prepreg. The corresponding axial-load compressive tests were conducted to investigate the influence factors that experimentally determine the axial compressive performances of the tubes. In the tests, the detailed failure process and the corresponding load-displacement characteristics were obtained; the influence rules of the foam core density, surface layer thickness, fiber ply combination and end restraint on the failure modes and ultimate bearing capacity were studied. Results indicated that: (1) the fiber ply combination, surface layer thickness and end restraint have a great influence on the ultimate load bearing capacity; (2) a reasonable fiber ply combination and reliable interfacial adhesion not only optimize the strength but also transform the failure mode from brittle failure to ductile failure, which is vital to the fully utilization of the composite strength of these composite foam sandwich pipes.

  17. A Sandwiched/Cracked Flexible Film for Multi-Thermal Monitoring and Switching Devices

    KAUST Repository

    Tai, Yanlong

    2017-08-30

    Polydimethylsiloxane (PDMS)-based flexible films have substantiated advantages in various sensing applications. Here, we demonstrate the highly sensitive and programmable thermal-sensing capability (thermal index, B, up to 126 × 103 K) of flexible films with tunable sandwiched microstructures (PDMS/cracked single-walled carbon nanotube (SWCNT) film/PDMS) when a thermal stimulus is applied. We found that this excellent performance results from the following features of the film\\'s structural and material design: (1) the sandwiched structure allows the film to switch from a three-dimensional to a two-dimensional in-plane deformation and (2) the stiffness of the SWCNT film is decreased by introducing microcracks that make deformation easy and that promote the macroscopic piezoresistive behavior of SWCNT crack islands and the microscopic piezoresistive behavior of SWCNT bundles. The PDMS layer is characterized by a high coefficient of thermal expansion (α = 310 × 10-6 K-1) and low stiffness (∼2 MPa) that allow for greater flexibility and higher temperature sensitivity. We determined the efficacy of our sandwiched, cracked, flexible films in monitoring and switching flexible devices when subjected to various stimuli, including thermal conduction, thermal radiation, and light radiation.

  18. Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

    Science.gov (United States)

    Ryan, S.; Ordonez, E.; Christiansen, E. L.; Lear, D. M.

    2010-01-01

    Open cell metallic foam core sandwich panel structures are of interest for application in spacecraft micrometeoroid and orbital debris shields due to their novel form and advantageous structural and thermal performance. Repeated shocking as a result of secondary impacts upon individual foam ligaments during the penetration process acts to raise the thermal state of impacting projectiles ; resulting in fragmentation, melting, and vaporization at lower velocities than with traditional shielding configurations (e.g. Whipple shield). In order to characterize the protective capability of these structures, an extensive experimental campaign was performed by the Johnson Space Center Hypervelocity Impact Technology Facility, the results of which are reported in this paper. Although not capable of competing against the protection levels achievable with leading heavy shields in use on modern high-risk vehicles (i.e. International Space Station modules), metallic foam core sandwich panels are shown to provide a substantial improvement over comparable structural panels and traditional low weight shielding alternatives such as honeycomb sandwich panels and metallic Whipple shields. A ballistic limit equation, generalized in terms of panel geometry, is derived and presented in a form suitable for application in risk assessment codes.

  19. Shear Behavior of 3D Woven Hollow Integrated Sandwich Composites: Experimental, Theoretical and Numerical Study

    Science.gov (United States)

    Zhou, Guangming; Liu, Chang; Cai, Deng'an; Li, Wenlong; Wang, Xiaopei

    2017-08-01

    An experimental, theoretical and numerical investigation on the shear behavior of 3D woven hollow integrated sandwich composites was presented in this paper. The microstructure of the composites was studied, then the shear modulus and load-deflection curves were obtained by double lap shear tests on the specimens in two principal directions of the sandwich panels, called warp and weft. The experimental results showed that the shear modulus of the warp was higher than that of the weft and the failure occurred in the roots of piles. A finite element model was established to predict the shear behavior of the composites. The simulated results agreed well with the experimental data. Simultaneously, a theoretical method was developed to predict the shear modulus. By comparing with the experimental data, the accuracy of the theoretical method was verified. The influence of structural parameters on shear modulus was also discussed. The higher yarn number, yarn density and dip angle of the piles could all improve the shear modulus of 3D woven hollow integrated sandwich composites at different levels, while the increasing height would decrease the shear modulus.

  20. Sensitive sandwich immunoassay based on single particle mode inductively coupled plasma mass spectrometry detection.

    Science.gov (United States)

    Liu, Rui; Xing, Zhi; Lv, Yi; Zhang, Sichun; Zhang, Xinrong

    2010-11-15

    A sensitive sandwich type immunoassay has been proposed with the detection by inductively coupled plasma mass spectrometry (ICP-MS) in a single particle mode (time resolved analysis). The signal induced by the flash of ions ((197)Au(+)) due to the ionization of single Au-nanoparticle (Au-NP) label in the plasma torch can be measured by the mass spectrometer. The frequency of the transient signals is proportional to the concentration of Au-NPs labels. Characteristics of the signals obtained from Au-NPs of 20, 45 and 80 nm in diameters were discussed. The analytical figures for the determination of Au-labeled IgG using ICP-MS in conventional integral mode and single particle mode were compared in detail. Rabbit-anti-human IgG was used as a model analyte in the sandwich immunoassay. A detection limit (3 σ) of 0.1 ng mL(-1) was obtained for rabbit-anti-human IgG after immunoreactions, with a linear range of 0.3-10 ng mL(-1) and a RSD of 8.1% (2.0 ng mL(-1)). Finally, the proposed method was successfully applied to spiked rabbit-anti-human IgG samples and rabbit-anti-human serum samples. The method resulted to be a highly sensitive ICP-MS based sandwich type immunoassay. Copyright © 2010 Elsevier B.V. All rights reserved.

  1. Experimental study on the seismic performance of new sandwich masonry walls

    Science.gov (United States)

    Xiao, Jianzhuang; Pu, Jie; Hu, Yongzhong

    2013-03-01

    Sandwich masonry walls are widely used as energy-saving panels since the interlayer between the outer leaves can act as an insulation layer. New types of sandwich walls are continually being introduced in research and applications, and due to their unique bond patterns, experimental studies have been performed to investigate their mechanical properties, especially with regard to their seismic performance. In this study, three new types of sandwich masonry wall have been designed, and cyclic lateral loading tests were carried out on five specimens. The results showed that the specimens failed mainly due to slippage along the bottom cracks or the development of diagonal cracks, and the failure patterns were considerably influenced by the aspect ratio. Analysis was undertaken on the seismic response of the new walls, which included ductility, stiffness degradation and energy dissipation capacity, and no obvious difference was observed between the seismic performance of the new walls and traditional walls. Comparisons were made between the experimental results and the calculated results of the shear capacity. It is concluded that the formulas in the two Chinese codes (GB 50011 and GB 50003) are suitable for the calculation of the shear capacity for the new types of walls, and the formula in GB 50011 tends to be more conservative.

  2. Process Factors and Edgewise Compressive Properties of Scarf-repaired Honeycomb Sandwich Structures

    Science.gov (United States)

    Liu, Sui; Guan, Zhidong; Guo, Xia; Sun, Kai; Kong, Jiaoyue; Yan, Dongxiu

    2014-10-01

    Bonded repairs were conducted on flat and edge-closed composite sandwich panels that had undergone different levels of initial damage, and edgewise compression behaviors of repaired panel were tested. Experimental results indicate that these repair techniques can restore the compression performance of damaged panels effectively. The repaired specimens recovered an average of over 83 % of their strength. A k-sample Anderson-Darling test was used to analyze the influence of various parameters, including curing temperature, curing pressure, and repair configurations. After a thorough comparison, it was concluded that a high-temperature, high-pressure treatment can improve the mechanical performance of repaired panels, but the improvement is closely related to the structural complexity of the repaired region. A double-side repair scheme could be used to prevent the degradation of mechanical performance caused by the additional bending moment. The conclusions drawn in the present study provide further insight into the mechanical performance of repaired sandwich panels under edgewise compressive loads. These data facilitate the improved design methodology on bonded repair of composite sandwich structures.

  3. Three different signal amplification strategies for the impedimetric sandwich detection of thrombin

    Energy Technology Data Exchange (ETDEWEB)

    Ocaña, Cristina; Valle, Manel del, E-mail: manel.delvalle@uab.cat

    2016-03-17

    In this work, we report a comparative study on three highly specific amplification strategies for the ultrasensitive detection of thrombin with the use of aptamer sandwich protocol. The protocol consisted on the use of a first thrombin aptamer immobilized on the electrode surface, the recognition of thrombin protein, and the reaction with a second biotinylated thrombin aptamer forming the sandwich. Through the exposed biotin end, three variants have been tested to amplify the electrochemical impedance signal. The strategies included (a) silver enhancement treatment, (b) gold enhancement treatment and (c) insoluble product produced by the combination of the enzyme horseradish peroxidase (HRP) and 3-amino-9-ethylcarbazole (AEC). The properties of the sensing surface were probed by electrochemical impedance measurements in the presence of the ferrocyanide/ferricyanide redox marker. Insoluble product strategy and silver enhancement treatment resulted in the lowest detection limit (0.3 pM), while gold enhancement method resulted in the highest reproducibility, 8.8% RSD at the pM thrombin concentration levels. Results of silver and gold enhancement treatment also permitted direct inspection by scanning electron microscopy (SEM). - Highlights: • Aptasensor to detect thrombin reaching the femtomolar level. • Biosensing protocol employs two thrombin aptamers in a sandwich capture scheme. • Use of second biotinylated aptamer allows many amplification and detection variants. • Precipitation reaction provides the highest signal amplification of ca. 3 times. • Double recognition event improves remarkably selectivity for thrombin detection.

  4. Sandwiched polymer fibre in fibrin matrices for the dictation of endothelial cells undergoing angiogenesis

    Science.gov (United States)

    Sukmana, I.; Djuansjah, J. R. P.

    2013-04-01

    We present here a three-dimensional (3D) sandwich system made by poly(ethylene terephthalate) (PET) fibre and fibrin extracellular matrix (ECM) for endothelial cell dictation and angiogenesis guidance. In this three-dimensional system, Human Umbilical Vein Endothelial cells (HUVECs) were firstly cultured for 2 (two) days to cover the PET fibre before sandwiched in two layer fibrin gel containing HUVECs. After 4 (four) days of culture, cel-to-cel connection, tube-like structure and multi-cellular lumen formation were then assessed and validated. Phase contrast and fluorescence imaging using an inverted microscope were used to determine cell-to-cell and cell-ECM interactions. Laser scanning confocal microscopy and histological techniques were used to confirm the development of tube-like structure and multi-cellular lumen formation. This study shows that polymer fibres sandwiched in fibrin gel can be used to dictate endothelial cells undergoing angiogenesis with potential application in cancer and cardiovascular study and tissue engineering vascularisation.

  5. Use of a compact sandwich specimen to evaluate fracture toughness and interfacial bonding of bone.

    Science.gov (United States)

    Wang, X; Lankford, J; Agrawal, C M

    1994-01-01

    The objective of the present study was to develop a reliable and statistically valid test to measure the fracture toughness of small specimens of bone, and by extension, prosthetic materials, using a compact sandwich specimen. Samples of bone were sandwiched between holders of a different material and using this specimen configuration a new technique was developed to test the fracture toughness of the bone interlayer. The effects of different specimens sizes and holder materials were investigated empirically. Using finite element analysis a correction factor was determined to account for the finite thickness of the interlayer and the analytical solutions governing the test specimen were accordingly modified. Bulk compact tension specimens of bone were tested for comparison. Both wet and dry bone were evaluated and the fracture surface morphology characterized using scanning electron microscopy. The results indicate no statistically significant differences between the fracture toughness values obtained from the compact tension and sandwich specimens. The application of this technique to the testing of interfacial bonding between bone and biomaterials is discussed.

  6. A novel sandwich differential capacitive accelerometer with symmetrical double-sided serpentine beam-mass structure

    Science.gov (United States)

    Xiao, D. B.; Li, Q. S.; Hou, Z. Q.; Wang, X. H.; Chen, Z. H.; Xia, D. W.; Wu, X. Z.

    2016-02-01

    This paper presents a novel differential capacitive silicon micro-accelerometer with symmetrical double-sided serpentine beam-mass sensing structure and glass-silicon-glass sandwich structure. The symmetrical double-sided serpentine beam-mass sensing structure is fabricated with a novel pre-buried mask fabrication technology, which is convenient for manufacturing multi-layer sensors. The glass-silicon-glass sandwich structure is realized by a double anodic bonding process. To solve the problem of the difficulty of leading out signals from the top and bottom layer simultaneously in the sandwich sensors, a silicon pillar structure is designed that is inherently simple and low-cost. The prototype is fabricated and tested. It has low noise performance (the peak to peak value is 40 μg) and μg-level Allan deviation of bias (2.2 μg in 1 h), experimentally demonstrating the effectiveness of the design and the novel fabrication technology.

  7. Half-sandwich cobalt complexes in the metal-organic chemical vapor deposition process

    Energy Technology Data Exchange (ETDEWEB)

    Georgi, Colin [Technische Universität Chemnitz, Faculty of Natural Science, Institute of Chemistry, Inorganic Chemistry, Chemnitz 09107 (Germany); Hapke, Marko; Thiel, Indre [Leibniz-Institut für Katalyse e.V. an der Universität Rostock (LIKAT), Albert-Einstein-Straße 29a, Rostock 18059 (Germany); Hildebrandt, Alexander [Technische Universität Chemnitz, Faculty of Natural Science, Institute of Chemistry, Inorganic Chemistry, Chemnitz 09107 (Germany); Waechtler, Thomas; Schulz, Stefan E. [Fraunhofer Institute of Electronic Nano Systems (ENAS), Technologie-Campus 3, Chemnitz 09126 (Germany); Technische Universität Chemnitz, Center for Microtechnologies (ZfM), Chemnitz 09107 (Germany); Lang, Heinrich, E-mail: heinrich.lang@chemie.tu-chemnitz.de [Technische Universität Chemnitz, Faculty of Natural Science, Institute of Chemistry, Inorganic Chemistry, Chemnitz 09107 (Germany)

    2015-03-02

    A series of cobalt half-sandwich complexes of type [Co(η{sup 5}-C{sub 5}H{sub 5})(L)(L′)] (1: L, L′ = 1,5-hexadiene; 2: L = P(OEt){sub 3}, L′ = H{sub 2}C=CHSiMe{sub 3}; 3: L = L′ = P(OEt){sub 3}) has been studied regarding their physical properties such as the vapor pressure, decomposition temperature and applicability within the metal-organic chemical vapor deposition (MOCVD) process, with a focus of the influence of the phosphite ligands. It could be shown that an increasing number of P(OEt){sub 3} ligands increases the vapor pressure and thermal stability of the respective organometallic compound. Complex 3 appeared to be a promising MOCVD precursor with a high vapor pressure and hence was deposited onto Si/SiO{sub 2} (100 nm) substrates. The resulting reflective layer is closed, dense and homogeneous, with a slightly granulated surface morphology. X-ray photoelectron spectroscopy (XPS) studies demonstrated the formation of metallic cobalt, cobalt phosphate, cobalt oxide and cobalt carbide. - Highlights: • Thermal studies and vapor pressure measurements of cobalt half-sandwich complexes was carried out. • Chemical vapor deposition with cobalt half-sandwich complexes is reported. • The use of Co-phosphites results in significant phosphorous-doped metallic layers.

  8. In-situ observation of nucleated polymer crystallization in polyoxymethylene sandwich composites

    Directory of Open Access Journals (Sweden)

    Miroslav eSlouf

    2015-03-01

    Full Text Available We introduce a dynamic sandwich method, which can be used for in-situ observation and quantification of polymer crystallization nucleated by micro/nanoparticles. The method was applied on polyoxymethylene (POM composites with three nucleating agents: talc micropowder (POM/mTalc, chalk nanopowder (POM/nChalk and titanate nanotubes (POM/TiNT. The nucleating agents were deposited between polymer films, the resulting sandwich samples were consolidated by thermal treatment, and their microtomed cross-sections were observed during isothermal crystallization by polarized light microscopy. As the intensity of polarized light was shown to be proportional to the relative crystallinity, the PLM results could be fitted to Avrami equation and the nucleating activity of all investigated particles could be quantified by means of Avrami parameters (n, k. The crystallization half-times increased reproducibly in the following order: POM/nChalk < POM/mTalc < POM/TiNT ~ POM. For strong nucleating agents (mTalc, nChalk, the crystallization kinetics corresponded to spontaneous crystallization starting from central nucleating layer, which was verified by computer simulations. The results were also confirmed by DSC. We concluded that the sandwich method is an efficient microscopic technique for detailed evaluation of nucleating activity of arbitrary micro/nanoparticles in polymer systems.

  9. Lamb wave-based BVID imaging for a curved composite sandwich panel

    Science.gov (United States)

    He, Jiaze; Yuan, Fuh-Gwo

    2017-02-01

    Composite sandwich structures, consisting of a low density core sandwiched between two laminated facesheets, have been widely used in various aerospace structures. A new Lamb wave-based imaging condition, which will be referred to as the inverse incident wave energy (IIWE) imaging criterion, is proposed in this paper to resolve the situations where the incident wave energy weakly penetrates into the damaged area in the upper facesheet region. Current imaging conditions by analyzing wavefield reconstructed from laser Doppler vibrometer (LDV) scanning have been proven to be adequate for imaging damage in layered composite laminates. In this research, those current imaging conditions were applied and compared in the composite foam structures for barely visible impact damage (BVID). A piezoelectric wafer was used to excite Lamb waves into the structure and a LDV was used to scan the potential damaged areas in the upper facesheet of the panel. A BVID site in a curved composite sandwich foam aileron was inspected using various wavefield analysis methods and the damage images were compared with C-scan images. A few imaging conditions that are effective for this BVID site are identified when the incident waves have difficulties penetrating into the damaged region.

  10. Voltage-induced switching dynamics based on an AZO/VO2/AZO sandwiched structure

    Science.gov (United States)

    Xiao, Han; Li, Yi; Fang, Baoying; Wang, Xiaohua; Liu, Zhimin; Zhang, Jiao; Li, Zhengpeng; Huang, Yaqin; Pei, Jiangheng

    2017-11-01

    A vanadium dioxide (VO2) thin film was prepared on an Al-doped ZnO (AZO) conductive glass substrate by DC magnetron sputtering and a post-annealing process. The AZO/VO2/AZO sandwiched structure was fabricated on the VO2/AZO composite film using photolithography and a chemical etching process. The composition, microstructure and optical properties of the VO2/AZO composite film were tested. The results showed that the VO2/AZO composite film was poly-crystalline and the AZO layer did not change the preferred growth orientation of VO2. When the voltage was applied on both of the transparent conductive layers of the AZO/VO2/AZO sandwiched structure, an abrupt change in the current was observed at different temperatures. The temperature dependence of I-V characteristic curves for the AZO/VO2/AZO sandwiched structure was analyzed. The phase transition voltage value is 7.5 V at 20 °C and decreases with increasing temperature.

  11. Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin

    Directory of Open Access Journals (Sweden)

    J. P. Torres

    2013-01-01

    Full Text Available Nowadays, there is a growing interest for the use and development of materials synthesized from renewable sources in the polymer composites manufacturing industry; this applies for both matrix and reinforcement components. In the present research, a novel basalt fibre reinforced (BFR bioepoxy green composite is proposed as an environmentally friendly alternative to traditional petroleum-derived composites. In addition, this material system was combined with cork as core material for the fabrication of fibre composite sandwich structures. Mechanical properties of both skin and core materials were assessed through flexural and tensile tests. Finite element (FEM simulations for the mechanical stress analysis of the sandwich material were carried out, and a maximum allowable shear stress for material failure under bending loads was established. Permeability measurements of the basalt fabrics were carried out in order to perform numerical simulations of liquid composite moulding (LCM processes on the PAM-RTM software. The proposed green-composite sandwich material was used for the fabrication of a longboard as a case study for a sports equipment application. Numerical simulations of the mould filling stage allowed the determination of an optimal mould filling strategy. Finally, the load-bearing capacity of the board was studied by means of FEM simulations, and the presented design proved to be acceptable for service.

  12. Flexible freestanding sandwich type ZnO/rGO/ZnO electrode for wearable supercapacitor

    Science.gov (United States)

    Ghorbani, Mina; Golobostanfard, Mohammad Reza; Abdizadeh, Hossein

    2017-10-01

    The development of flexible supercapacitors with high energy and power density as one of the main components of wearable electronics is in an enormous interest. In this report, a unique flexible electrode based on freestanding sandwich type ZnO/rGO/ZnO paper is fabricated by a simple low cost sol-gel method for utilizing in flexible supercapacitor. ZnO layers are deposited on both sides of rGO paper which is prepared by a modified Hummer's method and evaporation induced assembly. The uniform and densely packed ZnO layers are formed on graphene oxide paper and the paper is simultaneously reduced. Structural analysis reveals the formation of ZnO thin films on both sides of rGO nanosheets, which leads to the sandwich architecture. Also, the effect of ZnO sol-gel process parameters on microstructure of sandwich paper are investigated and the most suitable condition for highest supercapacity performance is the solvent of 1-PrOH, stabilizer of TeA, sol concentration of 0.2 M, deposition speed of 30 mm min-1, and 10 deposited layers. The results of electrochemical impedance spectroscopy, galvanostatic charge-discharge, and cyclic voltammetry confirm that the incorporation of ZnO improves the capacitive performance of rGO electrode. Moreover, ZnO/rGO/ZnO flexible electrode exhibits suitable capacitance value of 60.63 F g-1 at scan rate of 5 mV/s.

  13. Marginal Adaptation Evaluation of Biodentine and MTA Plus in "Open Sandwich" Class II Restorations.

    Science.gov (United States)

    Aggarwal, Vivek; Singla, Mamta; Yadav, Suman; Yadav, Harish; Ragini

    2015-01-01

    This study aimed at evaluation of two different commercially available calcium silicate materials (Biodentine and mineral trioxide aggregate [MTA] Plus) used as dentin substitute. Sixty Class II cavities were prepared in extracted mandibular third molars, with margins extending 1 mm below the cementum-enamel junction. The samples were divided into three groups on the basis of dentin substitute used: resin modified glass ionomer cement, Biodentine, and MTA Plus. Cavities were restored with composite resins in an "open sandwich" technique. The samples were subjected to alternate aging in phosphate buffered saline and cyclic loading. Marginal adaptation was evaluated in terms of "continuous margin" at the gingival margin, using a low vacuum scanning electron microscope. Statistical analysis was done with two-way analysis of variance with Holm-Sidak's correction for multiple comparisons. The glass ionomer group and Biodentine group presented an overall 83% and 91% of continuous margins, with no difference between them. MTA Plus showed least values of continuous margins. Granular deposits were seen over the surface of Biodentine and MTA Plus. Biodentine and resin-modified glass ionomer cement, when used as a dentin substitute under composite restorations in open sandwich technique, gave satisfactory marginal adaptation values. Contemporary calcium silicate materials can be used as dentin substitute materials in "open sandwich" Class II restorations. This study evaluates the marginal adaptation of Biodentine, MTA Plus, and resin modified glass ionomer cement used as dentin substitutes and reports better adaptation obtained with Biodentine and glass ionomer cement. © 2015 Wiley Periodicals, Inc.

  14. Nanometric self-assembling peptide layers maintain adult hepatocyte phenotype in sandwich cultures

    Directory of Open Access Journals (Sweden)

    Borrós Salvador

    2010-12-01

    Full Text Available Abstract Background Isolated hepatocytes removed from their microenvironment soon lose their hepatospecific functions when cultured. Normally hepatocytes are commonly maintained under limited culture medium supply as well as scaffold thickness. Thus, the cells are forced into metabolic stress that degenerate liver specific functions. This study aims to improve hepatospecific activity by creating a platform based on classical collagen sandwich cultures. Results The modified sandwich cultures replace collagen with self-assembling peptide, RAD16-I, combined with functional peptide motifs such as the integrin-binding sequence RGD and the laminin receptor binding sequence YIG to create a cell-instructive scaffold. In this work, we show that a plasma-deposited coating can be used to obtain a peptide layer thickness in the nanometric range, which in combination with the incorporation of functional peptide motifs have a positive effect on the expression of adult hepatocyte markers including albumin, CYP3A2 and HNF4-alpha. Conclusions This study demonstrates the capacity of sandwich cultures with modified instructive self-assembling peptides to promote cell-matrix interaction and the importance of thinner scaffold layers to overcome mass transfer problems. We believe that this bioengineered platform improves the existing hepatocyte culture methods to be used for predictive toxicology and eventually for hepatic assist technologies and future artificial organs.

  15. Effect of Faces Type and Thickness on Mechanical Properties of Sandwich Panels

    Directory of Open Access Journals (Sweden)

    Mohammad Jabbari

    2014-05-01

    Full Text Available Sandwich panels are new kind of layered composites that usually are composed of three layers and their core layers thickness is higher but the top layers are determinative indetermination of the products strength and stiffness. In this study, effect of faces type and thickness on mechanical properties of sandwich panels was investigated. The variables included, faces type with 3, 4 and 5 mm thickness (beech face, popular face and adhesive type (PMDI. After making panels, sampling test (based on DIN- EN 326-1 was considered. Mechanical properties of panels included modulus of elasticity as well as module of rupture (based on DIN- EN 310 standard and impact bending strength (IBS (based on ASTM- D 3499 standard were measured. The gathered data were analyzed as completely randomized factorial design. The results showed that, the thickness of faces has a significant effect on the mechanical properties. With increasing thickness of 3 to 5 mm, modulus of rupture, modulus of elasticity and impact bending strength (IBS increased. The interaction effect between species and thickness showed that using of beech genus with 5 mm thickness leads to increase of mechanical properties in sandwich panels.

  16. Out-plane Compressive Properties for Isosceles Trapezoid Honeycomb Core of FRP Sandwich Panel

    Directory of Open Access Journals (Sweden)

    ZHENG Ji-liang

    2017-02-01

    Full Text Available The experiment and simulation investigations on out-plane compressive characteristics of FRP sandwich panel were conducted. The results show that two deformation stages are elastic deformation and fracture stages in out-plane compressive deformation. The yielding mode deformation as t1/h which is very big,while the buckling mode deformation as t1/h which is very small. The part 2 in the honeycomb core is main bearing part for sandwich panel,and the part 2 is supported by the part 1 and part 3 in the honeycomb core,while the honeycomb core is supported by the panel. So,the cell wall thickness of part 2 has the most significant influence on the compressive strength,and the influence by the cell wall side length of honeycomb core is the secondary,while the influence by the cell wall thickness of part 1 and part 3 in honeycomb core and the thickness of panel is the weakest. When the honeycomb core height is fixed,the compressive strength of FRP sandwich panel gradually increases along with honeycomb core layers increase.

  17. Sound Transmission Loss Through a Corrugated-Core Sandwich Panel with Integrated Acoustic Resonators

    Science.gov (United States)

    Schiller, Noah H.; Allen, Albert R.; Zalewski, Bart F; Beck, Benjamin S.

    2014-01-01

    The goal of this study is to better understand the effect of structurally integrated resonators on the transmission loss of a sandwich panel. The sandwich panel has facesheets over a corrugated core, which creates long aligned chambers that run parallel to the facesheets. When ports are introduced through the facesheet, the long chambers within the core can be used as low-frequency acoustic resonators. By integrating the resonators within the structure they contribute to the static load bearing capability of the panel while also attenuating noise. An analytical model of a panel with embedded resonators is derived and compared with numerical simulations. Predictions show that acoustic resonators can significantly improve the transmission loss of the sandwich panel around the natural frequency of the resonators. In one configuration with 0.813 m long internal chambers, the diffuse field transmission loss is improved by more than 22 dB around 104 Hz. The benefit is achieved with no added mass or volume relative to the baseline structure. The embedded resonators are effective because they radiate sound out-of-phase with the structure. This results in destructive interference, which leads to less transmitted sound power.

  18. Infrared absorber based on sandwiched two-dimensional black phosphorus metamaterials.

    Science.gov (United States)

    Wang, Jiao; Jiang, Yannan

    2017-03-06

    As a direct band gap two-dimensional (2D) semiconductor material, black phosphorus (BP) bridges the characteristics of graphene, with a zero or near-zero band gap, and transition metal dichalcogenides, with a wide band gap. In the infrared (IR) regime, 2D BP materials can harvest electromagnetic energy due to losses derived from its surface conductivity. In this paper, we propose an IR absorber design comprising 2D BP metamaterials sandwiched between dielectric layers. The multilayered sandwich-like absorber structure is mounted on a full reflective gold mirror, which forms a Fabry-Perot resonator to strengthen light-matter interactions. Harvested surface plasmons are excited around the 2D BP metamaterial edges, and the incident IR light can be efficiently dissipated by increasing the number of layers of the sandwich-like structure (NLSS). The physical absorption mechanism can be attributed to the destructive interference from the metamaterials, which can be enhanced with increasing NLSS. Here, a phase difference of about 180° is obtained between the directly reflected wave from the first interface and the emergent wave derived from the superposition of the multiple reflections among the resonator, and the amplitude of the emergent wave is steadily reduced to a value close to that of the directly reflected wave with increasing NLSS for incident transverse-magnetic polarized IR illumination.

  19. Determination of Peroxide Value of Edible Oils Used in Restaurants and Sandwich Shops in Yasuj in 2006

    Directory of Open Access Journals (Sweden)

    A Pourmahmoudi

    2008-04-01

    Full Text Available ABSTRACT: Introduction & Objective: Nowadays the extensive changes in lifestyle resulted in an increase in consumption of fast food. This type of food, because of using deep–fat frying, may contain some toxic or unfavorable substances which have adverse effects on consumers’ health. The aim of this study was to determine the peroxide value of edible oils which are used in restaurants and sandwich shops in Yasouj city. Materials & Methods: This descriptive study was carried out on all sandwich shops (n=36 and restaurants (n=12 in Yasuj city in 2006. All samples and questionnaire data in restaurants and sandwich shops were collected at 11:30am and 12:30pm respectively based on a national standard protocol, number 493, by a food expert. The peroxide value was determined based on national standard procedure, number 4179, in a food laboratory and the acceptable limit was defined as 7 meq/kg. Results: Findings of this study showed that in terms of health rules and regulations, at least 50% of oils used in restaurants and 70% in sandwich shops were unfavorable. Peroxide value of 58.3% of oils in restaurants and 97.3% in sandwich shops was greater than the acceptable limit. Conclusion: These findings have shown that the health rules and regulations for the oils are not exercised in Yasouj restaurants and sandwich shops and this can have adverse effects on consumers’ health.

  20. Microbiological safety of sandwiches from hospitals and other health care establishments in the United Kingdom with a focus on Listeria monocytogenes and other Listeria species.

    Science.gov (United States)

    Little, C L; Barrett, N J; Grant, K; McLauchlin, J

    2008-02-01

    In the United Kingdom between 1999 and 2004, there were four outbreaks of Listeria monocytogenes infection associated with sandwiches purchased from or provided in hospitals. Elderly or immunocompromised individuals and pregnant women are particularly vulnerable to infection; therefore, the focus of this study was on sandwiches served in health care establishments. Of 3,249 sandwich samples collected between April 2005 and March 2006, 3.3% were of unsatisfactory microbiological quality because of high levels of Enterobacteriaceae (2.0%; > or = 10(4) CFU/g for sandwiches not containing salad), Escherichia coli (0.8%; > or = 10(2) CFU/g), Staphylococcus aureus (0.6%; > or = 10(2) CFU/g), and/or Listeria spp. (0.1%; two samples with L. welshimeri at 1.8 x 10(2) and 7.4 x 10(3) CFU/g and one sample with L. seeligeri at 1.8 x 10(3) CFU/g). Overall, 7.6% of sandwiches were contaminated with Listeria spp. L. monocytogenes was detected in 2.7% (88) of samples: 87 samples at Listeria spp. and L. monocytogenes was found in sandwiches collected from hospital cafeterias, shops, or wards and in sandwiches stored and/or displayed at temperatures higher than 8 degrees C. The presence of Listeria spp. and L. monocytogenes also was associated with sandwiches that (i) were supplied from outside the establishment, (ii) were prepacked, (iii) had a main sandwich filling of poultry meat, or (iv) contained salad ingredients, soft cheese, and/or mayonnaise. Control of L. monocytogenes in sandwich manufacturing and within health care establishments is essential to minimize the potential for consumption of this bacterium at levels hazardous to health. The findings from this study support the proposal that manufacturers supplying sandwiches to health care establishments should follow the British Sandwich Association recommended guidelines of complete absence of L. monocytogenes in sandwiches at the point of production.

  1. Construction work

    CERN Multimedia

    2004-01-01

    Construction work on building 179 will start on the 16th February 2004 and continue until November 2004. The road between buildings 179 and 158 will temporarily become a one way street from Route Democrite towards building 7. The parking places between buildings 179 and 7 will become obsolete. The ISOLDE collaboration would like to apologize for any inconveniences.

  2. Vibroacoustic flexural properties of symmetric honeycomb sandwich panels with composite faces

    Science.gov (United States)

    Guillaumie, Laurent

    2015-05-01

    The vibroacoustic bending properties of honeycomb sandwich panels with composite faces are studied from the wavenumber modulus to the mechanical impedance, passing through the modal density. Numerical results extracted from finite element software computations are compared with analytical results. In both cases, the homogenization method is used to calculate the global properties of the sandwich panel. Since faces are made of composite material, the classical laminate theory serves as reference. With particular conditions used in the application for symmetric panels, the original orthotropic mechanical properties can be reduced simply to three parameters commonly used in vibroacoustic characterizations. These three parameters are the mass per unit area, the bending rigidity and the out-of-plane shear rigidity. They simultaneously govern the wavenumber modulus, the modal frequencies, the modal density and the mechanical impedance. For all of these vibroacoustic characterizations, a special frequency called the transition frequency separates two domains. In the first domain, below the transition frequency or for low frequencies, the orthotropic sandwich panel has a classical isotropic plate behavior. In the second domain, above the transition frequency or for high frequencies, the out-of-plane shear rigidity is very significant and changes the behavior. However, the results discussed are only valid up to a certain frequency which is determined by the thickness and out-of-plane shear stiffness of the honeycomb core, the thickness and the bending stiffness of the laminated face sheets and then the mass per unit area and bending stiffness of the total sandwich structure. All these parameters influence the final choice of model and simplifications presented. Experimental measurements of the bending wavenumber modulus and modal frequencies for our own application were carried out. In the vibroacoustic domain, the critical frequency is also an important frequency. It again

  3. Development of an innovative sandwich common bulkhead for cryogenic upper stage propellant tank

    Science.gov (United States)

    Szelinski, B.; Lange, H.; Röttger, C.; Sacher, H.; Weiland, S.; Zell, D.

    2012-12-01

    In the frame of the Future Launcher Preparatory Program (FLPP) investigating advancing technologies for the Next Generation of Launchers (NGL) a number of novel key technologies are presently under development for significantly improving vehicle performance in terms of payload capacity and mission versatility. As a respective ESA guided technology development program, Cryogenic Upper Stage Technologies (CUST) has been launched within FLPP that hosts among others the development of a common bulkhead to separate liquid hydrogen from the liquid oxygen compartment. In this context, MT Aerospace proposed an advanced sandwich design concept which is currently in the development phase reaching for TRL4 under MT Aerospace responsibility. Key components of this sandwich common bulkhead are a specific core material, situated in-between two thin aluminum face sheets, and an innovative thermal decoupling element at the equatorial region. The combination of these elements provides excellent thermal insulation capabilities and mechanical performance at a minimum weight, since mechanical and thermal functions are merged in the same component. This improvement is expressed by substantial performance figures of the proposed concept that include high resistance against reverse pressure, an optimized heat leak and minimized mass, involving the sandwich dome structure and the adjacent interface rings. The development of single sub-technologies, all contributing to maturate the sandwich common bulkhead towards the desired technology readiness level (TRL), is described in the context of the given design constraints as well as technical, functional and programmatic requirements, issued from the stage level. This includes the thermal and mechanical characterization of core materials, manufacturing issues as well as non-destructive testing and the thermal and structural analyses and dimensioning of the complete common bulkhead system. Dedicated TRL assessments in the Ariane 5 Mid

  4. Characteristics of sandwich-type structural elements built of advanced composite materials from three dimensional fabrics

    Directory of Open Access Journals (Sweden)

    Castejón, L.

    1997-12-01

    Full Text Available Sandwich-type structures have proved to be alternatives of great success for several fields of application, and specially in the building sector. This is due to their outstanding properties of .specific rigidity and strength against bending loads and other range of advantages like fatigue and impact resistance, attainment of flat and smooth surfaces, high electric and thermal insulation, design versatility and some others. However, traditional sandwich structures present problems like their tendency towards delamination, stress concentrations in bores or screwed Joints, and pre resistance. These problems are alleviated thanks to the use of new sandwich structures built using three dimensional structures of advanced composite materials, maintaining the present advantages for more traditional sandwich structures. At this rate, these new structures can be applied in several areas where conventional sandwich structures used to be like walls, partitions, floor and ceiling structures, domes, vaults and dwellings, but with greater success.

    Las estructuras tipo sándwich han demostrado ser alternativas de gran éxito para diversos campos de aplicación y, en concreto, en el sector de la construcción, listo es gracias a sus excelentes propiedades de rigidez y resistencia específica frente a cargas de flexión y otra larga lista de ventajas, a la que pertenecen, por ejemplo, su buena resistencia a fatiga, resistencia al impacto, obtención de superficies lisas y suaves, elevado aislamiento térmico y eléctrico, versatilidad de diseño y otras. Sin embargo, las estructuras sándwich, tradicionales presentan una problemática consistente en su tendencia a la delaminación, concentraciones de tensiones ¿aparecidas ante la existencia de agujeros o uniones atornilladas y resistencia al fuego. Estos problemas son pifiados gracias a la aplicación de estructuras novedosas tipo sándwich, construidas a partir de tejidos tridimensionales de materiales

  5. Design and Construction of Precision Tooling for Construction of Micromegas Detectors for the ATLAS Small Wheel Upgrade Project in Germany

    CERN Document Server

    Losel, Philipp Jonathan; The ATLAS collaboration; Schaile, Otto; Hertenberger, Ralf; Biebel, Otmar; Bortfeldt, Jonathan; Flierl, Bernhard Matthias

    2016-01-01

    Mechanical precision is a key-aspect of the high-rate capable Micromegas detectors for the upgrade of the Small Wheels of the ATLAS muon spectrometer. 32 SM2 quadruplets will be built by four German institutes with cathodes and strip-anodes made of stable honeycomb sandwiches. To achieve a single plane resolution below $100\\mu m$ the deviation from planarity of a single detector plane must not exceed $80\\mu m$ over the whole active area and the global position of the readout strips has to be within $30\\mu m$ for a single readout-plane of 3 PCB's, as well as between all four planes of a quadruplet. Precision tooling is used for the correct positioning of readout PCB's and readout sandwich planes. For quality control of the planarity of the sandwich planes a laser distance sensor combined with a coordinate measurement system has been developed. Deviation from planarity below 10 $\\mu$m can be easily resolved. We will present key features of the challenging construction procedure to achieve this high level of pre...

  6. Sandwich-format electrochemiluminescence assay for PDGF-BB using quantum dots-dendrimer nanocomposites as probe.

    Science.gov (United States)

    Zhang, Jing-Jing; Cao, Jun-Tao; Shi, Gui-Fang; Liu, Yan-Ming; Chen, Yong-Hong; Ren, Shu-Wei

    2015-08-15

    This work describes a novel electrochemiluminescence aptasensor for highly sensitive detection of platelet-derived growth factor BB (PDGF-BB) using aptamer functionalized CdS quantum dots-polyamidoamine as probe (CdS QDs-PAMAM-Apt). CdS QDs-PAMAM nanocomposites were synthesized by one-pot synthesis in methanol. The prepared nanocomposites were linked with the NH2-aptamer 2 (Apt2) of PDGF-BB to form the CdS QDs-PAMAM-Apt2 probe by glutaraldehyde as coupling reagent. For constructing the aptasensor, MWCNTs-chitosan composites and NH2-aptamer 1 (Apt1) with the same base sequence as Apt2 were immobilized on the electrode by the self-assembled method to recognize the target protein PDGF-BB. In the presence of PDGF-BB, the structure of sandwiched format was formed between the Apt1 and the CdS QDs-PAMAM-Apt2 probe, thereby resulting in a proportional increase of ECL emission. Thanks to the efficient and stable ECL emission of CdS QDs-PAMAM dendrimer and the advantage of MWCNTs for accelerating the electron transfer, the highly sensitive detection of PDGF-BB with a detection limit of 0.13pM was achieved. The linear range is from 0.5pM to 1nM. The present protocol was applied to the analysis of PDGF-BB in human serum samples. The recoveries of PDGF-BB in human serum samples are 87.2-113% and RSD values are less than 3.6%. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. High Lithium Storage Capacity and Long Cycling Life Fe3S4 Anodes with Reversible Solid Electrolyte Interface Films and Sandwiched Reduced Graphene Oxide Shells.

    Science.gov (United States)

    Zhang, Yu-Jiao; Qu, Jin; Hao, Shu-Meng; Chang, Wei; Ji, Qiu-Yu; Yu, Zhong-Zhen

    2017-11-21

    Increasing demands for lithium-ion batteries (LIBs) with high energy density and high power density require highly reversible electrochemical reactions to enhance the cyclability and capacities of electrodes. As the reversible formation/decomposition of the solid electrolyte interface (SEI) film during the lithiation/delithiation process of Fe3S4 could bring about a higher capacity than its theoretical value, in the present work, synthesized Fe3S4 nanoparticles are sandwich-wrapped with reduced graphene oxide (RGO) to fabricate highly reversible and long cycling life anode materials for high-performance LIBs. The micron-sized long slit between sandwiched RGO sheets effectively prevents the aggregation of intermediate phases during the discharge/charge process and thus increases cycling capacity because of the reversible formation/decomposition of the SEI film driven by Fe nanoparticles. Furthermore, the RGO sheets interconnect with each other by a face-to-face mode to construct a more efficiently conductive network, and the maximum interfacial oxygen bridge bonds benefit the fast electron hopping from RGO to Fe3S4, improving the depth of the electrochemical reactions and facilitating the highly reversible lithiation/delithiation of Fe3S4. Thus, the resultant Fe3S4/RGO hybrid shows a highly reversible charge capacity of 1324 mA h g(-1) over 275 cycles at a current density of 100 mA g(-1), even retains 480 mA h g(-1) over 500 cycles at 1000 mA g(-1), which are much higher than reported values.

  8. End-to-end requirements management for multiprojects in the construction industry

    DEFF Research Database (Denmark)

    Wörösch, Michael

    industries. The research gives at the same time managers of construction projects a tool with which to manage their requirements end-to-end. In order to investigate how construction companies handle requirements, a case project – a Danish construction syndicate producing sandwich elements made from High...... Performance Concrete and insulation materials – is used. By means of action research and interviews of case project staff it has become evident that many elements of formalized requirements management are missing in the case project. To fill those gaps and be able to manage requirements end-to-end...

  9. Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges

    Science.gov (United States)

    Qi, Yujun; Fang, Hai; Liu, Weiqing

    2016-01-01

    Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error panel. PMID:26871435

  10. A comprehensive assessment of adhesively bonded joints between sandwich composite beams

    Science.gov (United States)

    Shahin, Khaled Omar

    Assessment of adhesively bonded joints between sandwich composite beams are presented in this thesis in three parts, each is concerned with a distinct aspect of the joint behaviour. In physical order, these include the deformations of the entire joint assembly, the state of stress in the joint overlap region, and the strain energy release at the crack-tip at the end of the overlap. Analytical models developed in this thesis, however, are not limited in their application to adhesive joint between sandwich beams. In each part of this thesis, the integrity of the proposed analytical models are tested against geometrically non-linear finite element models. In this first part of this thesis, an analytical asymptotic model is presented for the analysis of balanced and unbalanced adhesively bonded joints. The model takes advantage of the asymptotic nature of the adhesive stress functions by eliminating exponentially small terms. Analysis of balanced and unbalanced adhesive joints is greatly simplified with negligible loss in accuracy. Accurate closed-form solutions for both adhesive peel and shear stresses are presented, providing an efficient analysis and design tool and a significant contribution to the literature on unbalanced adhesively bonded joints. In the second part, the asymptotic model is extended to the analysis of strain energy release rates in adhesively bonded joints, using the crack closure concept. Closed-form expressions are presented for various joint types. The shear force and adhesive layer effects are included in the analysis, thus improving on currently available works in the literature. In joints with a long crack and a thin adhesive layer, the asymptotic model is shown to be in good agreement with classical beam theory models. In the third part, deformations in adhesively bonded joints between sandwich beams are studied. Adherends are modeled as cylindrically bent plates on elastic foundations and the overlap section is treated as a single

  11. Constructing Catalonia

    Directory of Open Access Journals (Sweden)

    Bill Philips

    2009-07-01

    Full Text Available Catalonia, in common with other nations, has long been concerned with the question of identity and difference. Its problematic relationship with Spain has led to an emphasis on differentiating itself from its larger neighbour (if we are to accept, as most Spaniards do not, that Catalonia is not Spain, a situation complicated by the loss of the Spanish colonies of Cuba and The Philippines in 1898, and the Spanish Civil War and subsequent dictatorship from 1936 to 1976. Beginning in the late nineteenth century, the construction of a Catalan identity followed a similar route to that taken by other European nations such as England, Ireland and, indeed, Spain, including an emphasis on rural values, activities and the countryside, and the conversion of specifically local traditions into national past times. It is only in the last ten years or so that this model of Catalan identity has been recognised for what it is – a model constructed and encouraged for and by specific nationalist political interests. Ironically, Catalonia’s identity abroad has also been constructed and manipulated for political purposes, but from quite a different perspective. Orwell’s /Homage to Catalonia/ (1938 narrates an extremely blinkered version of the Spanish Civil War which has achieved iconic status as a result of cold war politics. Subsequent portrayals of the Spanish Civil War – Valentine Cunningham’s /The Penguin Book of Spanish Civil War Verse/ (ed., Penguin, 1980, or Ken Loach’s 1995 film /Land and Freedom/ base their arguments unquestioningly on /Homage to Catalonia/, perpetuating a view of the nation’s recent history that is both reductive and inaccurate

  12. Constructing dialogues

    DEFF Research Database (Denmark)

    Bundgaard, Charlotte

    2017-01-01

    The concept of montage is proposed as a driver for establishing heterogeneous, open and dynamic new-industrial architecture. Drawing parallels between the intense industrialization that occurred in Denmark in the 1960s and current scenarios of IT-based production methods, montage is unfolded both...... as an aesthetic strategy and a technical procedure, taking inspiration from both visual arts and architecture. Montage is presented as a means of creating active, architectural interactions - material as well as in terms of meaning - not only in the realm of industrialization but also in the intersection between...... industrial production methods and on-site, craft-based fields of construction....

  13. Constructing History

    DEFF Research Database (Denmark)

    Jørgensen, Michael Riber

    2010-01-01

    The Icelandic sagas can be read and interpreted in many ways. This article examines the sagas both as literary expressions of a longstanding oral tradition and as part of a collective and cultural memory. The focus in the first part is on people and places in the sagas as ‘realms of memory’: things...... that help construct a common past and a common identity. The second part of the article explores the role of the sagas in medieval Iceland as ‘key myths’ that explain the origin and uniqueness of a society, and as moral and legal role models legitimizing the current social order....

  14. Transition metal half-sandwich complexes as redox mediators to glucose oxidase.

    Science.gov (United States)

    Forrow, Nigel J; Walters, Stephen J

    2004-02-15

    Chromium and manganese half-sandwich complexes are evaluated as mediators to glucose oxidase (GOx) since they are of similar size to ferrocene derivatives (sandwich complexes) and contain a single pi-ligand for interaction with the enzyme co-factor. A series of seven amino derivatives of [(eta-C(6)H(6))Cr(CO)(3)] were investigated of which only [[eta-C(6)Me(4)(NH(2))(2)]Cr(CO)(3)] (7), with the lowest oxidation potential of +40 mV (versus SCE), was found to display reversible electrochemistry. Small catalytic currents were recorded in the presence of GOx and glucose when complex (7) was incorporated in a screen-printed carbon electrode. Manganese cyclopentadienyl (Cp) half-sandwich complexes were found to be more effective GOx mediators and comparable in efficacy to ferrocene derivatives. A mediator rate constant k(M) of 2.1 x 10(5)M(-1)s(-1) was determined for the water-soluble complex [(eta-MeC(5)H(4))Mn(NO)(CN)(2)]Na (11) compared to a range of 3 x 10(4) to 8 x 10(6)M(-1)s(-1) previously determined for ferrocenes under the same experimental conditions. beta-Cyclodextrin (beta-cd) was found to be helpful in solubilising hydrophobic complexes such as [(eta-MeC(5)H(4))Mn(NO)(S(2)CNMe(2))] (15) and the neutral oxidised form of [MeCpMn(NO)[(SCCN)(2)

  15. Characterization of syntactic foams and their sandwich composites: Modeling and experimental approaches

    Science.gov (United States)

    Gupta, Nikhil

    Hollow particle filled polymers known as syntactic foams are lightweight and highly damage tolerant. Syntactic foams are used as core materials in sandwich composites. The use of such materials in aeronautical and space structures make it necessary to understand their characteristics for various environmental and loading conditions. The first part of the present work takes modeling and finite element analysis approach to understand and predict the deformation behavior of syntactic foams. Contact analysis is performed on single particle models by the finite element analysis approach. In the second part extensive experiments are carried out to characterize syntactic foams for hygrothermal and compressive properties, and syntactic foam core sandwich composites for compressive and flexural properties. Flexural tests are carried out in three and four point bending and short beam shear configurations. Syntactic foams are tested in three different specimen sizes and orientations to characterize them as per the recommendations of various ASTM standards. Effect of specimen aspect ratio on the measured mechanical properties can be determined by such an approach. The effect of change in the internal radius of hollow particles, called cenospheres, on mechanical properties is studied for all these loading conditions. Five different types of cenospheres are selected fir the study of the internal radius dependence of mechanical properties of syntactic foams and their sandwich composites. All selected types of cenospheres have the same outer radius, however, their internal radius is different. Hence, difference in mechanical properties of syntactic foams is caused due to a difference in only one parameter, the cenosphere internal radius. Such unique approach made it possible to identify the individual contribution of matrix resin and cenospheres in the mechanical properties of syntactic foams. Specimen deformation behavior and fracture features are correlated to deformation curves

  16. Sandwich allografts for long-bone nonunions in patients with osteogenesis imperfecta: a retrospective study.

    Science.gov (United States)

    Puvanesarajah, Varun; Shapiro, Jay R; Sponseller, Paul D

    2015-02-18

    Patients with osteogenesis imperfecta often develop nonunions, as internal fixation has limited applicability in this condition. We report the outcomes of a modified "sandwich technique" in the treatment of long-bone nonunions in patients with osteogenesis imperfecta; this technique brings circumferential stabilization and normal collagen to the nonunion site. From May 2003 through February 2012, twelve patients (eight females, four males; median age, 39.0 years; range, eleven to seventy-eight years) who had osteogenesis imperfecta (Sillence type I [three], type III [eight], and type IV [one]) and a combined total of thirteen nonunions (two humeral, two radial, three femoral, four tibial, and two ulnar; median duration, 15.0 months; range, six to 204 months) were treated at our institution with compressed sandwich allograft cortical struts. The struts were fashioned to be wide enough to allow for increased osteoconductive surface area and to approximate a hemicylindrical shape. Treatment history and demographics data were acquired through retrospective chart review. Follow-up radiographs were analyzed by two attending orthopaedic surgeons to determine radiographic findings. The median follow-up time was 4.6 years (range, 2.1 to 10.3 years). All thirteen nonunions, including one requiring a second graft procedure, healed with abundant, smooth allograft incorporation, resulting in an initial healing rate of 92% because of a refracture in one patient. This patient's nonunion ultimately healed with additional allograft struts and a new intramedullary rod. One patient required removal of prominent screws. The final follow-up examinations revealed no pain or refracture at the original nonunion site. All patients regained their prefracture level of function. Sandwich allograft struts constitute a durable, safe method for the stabilization and healing of persistent long-bone nonunions in patients with osteogenesis imperfecta. All patients showed incorporation of the

  17. Long-term outcomes of sandwich ventral hernia repair paired with hybrid vacuum-assisted closure.

    Science.gov (United States)

    Hicks, Caitlin W; Poruk, Katherine E; Baltodano, Pablo A; Soares, Kevin C; Azoury, Said C; Cooney, Carisa M; Cornell, Peter; Eckhauser, Frederic E

    2016-08-01

    Sandwich ventral hernia repair (SVHR) may reduce ventral hernia recurrence rates, although with an increased risk of surgical site occurrences (SSOs) and surgical site infections (SSIs). Previously, we found that a modified negative pressure wound therapy (hybrid vacuum-assisted closure [HVAC]) system reduced SSOs and SSIs after ventral hernia repair. We aimed to describe our outcomes after SVHR paired with HVAC closure. We conducted a 4-y retrospective review of all complex SVHRs (biologic mesh underlay and synthetic mesh overlay) with HVAC closure performed at our institution by a single surgeon. All patients had fascial defects that could not be reapproximated primarily using anterior component separation. Descriptive statistics were used to report the incidence of postoperative complications and hernia recurrence. A total of 60 patients (59.3 ± 11.4 y, 58.3% male, 75% American Society of Anesthesiologists class ≥3) with complex ventral hernias being underwent sandwich repair with HVAC closure. Major postoperative morbidity (Dindo-Clavien class ≥3) occurred in 14 (23.3%) patients, but incidence of SSO (n = 13, 21.7%) and SSI (n = 4, 6.7%) was low compared with historical reports. Median follow-up time for all patients was 12 mo (interquartile range 5.8-26.5 mo). Hernia recurrence occurred in eight patients (13.3%) after a median time of 20.6 months (interquartile range 16.4- 25.4 months). Use of a dual layer sandwich repair for complex abdominal wall reconstruction is associated with low rates of hernia recurrence at 1 year postoperatively. The addition of the HVAC closure system may reduce the risk of SSOs and SSIs previously reported with this technique and deserves consideration in future prospective studies assessing optimization of ventral hernia repair approaches. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. It All Starts with a Sandwich: Identification of Sialidases with Trans-Glycosylation Activity.

    Science.gov (United States)

    Nordvang, Rune T; Nyffenegger, Christian; Holck, Jesper; Jers, Carsten; Zeuner, Birgitte; Sundekilde, Ulrik K; Meyer, Anne S; Mikkelsen, Jørn D

    2016-01-01

    Sialidases (3.2.1.18) may exhibit trans-sialidase activity to catalyze sialylation of lactose if the active site topology is congruent with that of the Trypanosoma cruzi trans-sialidase (EC 2.4.1.-). The present work was undertaken to test the hypothesis that a particular aromatic sandwich structure of two amino acids proximal to the active site of the T. cruzi trans-sialidase infers trans-sialidase activity. On this basis, four enzymes with putative trans-sialidase activity were identified through an iterative alignment from 2909 native sialidases available in GenBank, which were cloned and expressed in Escherichia coli. Of these, one enzyme, SialH, derived from Haemophilus parasuis had an aromatic sandwich structure on the protein surface facing the end of the catalytic site (Phe168; Trp366), and was indeed found to exhibit trans-sialidase activity. SialH catalyzed production of the human milk oligosaccharide 3'-sialyllactose as well as the novel trans-sialylation product 3-sialyllactose using casein glycomacropeptide as sialyl donor and lactose as acceptor. The findings corroborated that Tyr119 and Trp312 in the T. cruzi trans-sialidase are part of an aromatic sandwich structure that confers trans-sialylation activity for lactose sialylation. The in silico identification of trans-glycosidase activity by rational active site topology alignment thus proved to be a quick tool for selecting putative trans-sialidases amongst a large group of glycosyl hydrolases. The approach moreover provided data that help understand structure-function relations of trans-sialidases.

  19. It All Starts with a Sandwich: Identification of Sialidases with Trans-Glycosylation Activity.

    Directory of Open Access Journals (Sweden)

    Rune T Nordvang

    Full Text Available Sialidases (3.2.1.18 may exhibit trans-sialidase activity to catalyze sialylation of lactose if the active site topology is congruent with that of the Trypanosoma cruzi trans-sialidase (EC 2.4.1.-. The present work was undertaken to test the hypothesis that a particular aromatic sandwich structure of two amino acids proximal to the active site of the T. cruzi trans-sialidase infers trans-sialidase activity. On this basis, four enzymes with putative trans-sialidase activity were identified through an iterative alignment from 2909 native sialidases available in GenBank, which were cloned and expressed in Escherichia coli. Of these, one enzyme, SialH, derived from Haemophilus parasuis had an aromatic sandwich structure on the protein surface facing the end of the catalytic site (Phe168; Trp366, and was indeed found to exhibit trans-sialidase activity. SialH catalyzed production of the human milk oligosaccharide 3'-sialyllactose as well as the novel trans-sialylation product 3-sialyllactose using casein glycomacropeptide as sialyl donor and lactose as acceptor. The findings corroborated that Tyr119 and Trp312 in the T. cruzi trans-sialidase are part of an aromatic sandwich structure that confers trans-sialylation activity for lactose sialylation. The in silico identification of trans-glycosidase activity by rational active site topology alignment thus proved to be a quick tool for selecting putative trans-sialidases amongst a large group of glycosyl hydrolases. The approach moreover provided data that help understand structure-function relations of trans-sialidases.

  20. Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core

    Directory of Open Access Journals (Sweden)

    Soroush Sadeghnejad

    2016-03-01

    Full Text Available A numerical and experimental low-velocity impact behavior of sandwich plates have been presently studied with regard to the compressibility and viscoelasticity features of their cores. Face sheets were assumed to be anisotropic composites or isotropic aluminum materials and a viscoelastic behavior has been considered for core. The boundary conditions are assumed to be simply supported or rigid. Abaqus, as FEM software, and its python script programming feature, have been used to model the specimens. To model hyper-viscoelastic nonlinear behavior of the core, Ogden hyper-foam elasticity and Prony series approach are manipulated. To solve the numerical problem, dynamic explicit solver option with sufficient solving amplitude has been used. Prony series have been used to model the core time-dependent behavior. In conjunction with a simple indentation experiment, FEM used to formulate a novel method for finding the Prony series coefficients. By performing some low-velocity impact experiments, the impact force and displacement of the composite sandwich plates have been investigated. The results indicate that increasing the structural damping increases the contact time and missing energy and decreases the stored energy of the system. The structures with composite face sheets have a minimum ratio of upper face sheet displacement to lower face sheet displacement in comparison to those with the isotropic face sheets. Impact behavior of isotropic face sheet specimens are more flattened than that of the composite face sheets. In addition, the specific energy stored in the sandwich plates with composite face sheets, on different supports, is greater than that stored in the aluminum face sheets.

  1. Sandwich-Architectured Poly(lactic acid)-Graphene Composite Food Packaging Films.

    Science.gov (United States)

    Goh, Kunli; Heising, Jenneke K; Yuan, Yang; Karahan, Huseyin E; Wei, Li; Zhai, Shengli; Koh, Jia-Xuan; Htin, Nanda M; Zhang, Feimo; Wang, Rong; Fane, Anthony G; Dekker, Matthijs; Dehghani, Fariba; Chen, Yuan

    2016-04-20

    Biodegradable food packaging promises a more sustainable future. Among the many different biopolymers used, poly(lactic acid) (PLA) possesses the good mechanical property and cost-effectiveness necessary of a biodegradable food packaging. However, PLA food packaging suffers from poor water vapor and oxygen barrier properties compared to many petroleum-derived ones. A key challenge is, therefore, to simultaneously enhance both the water vapor and oxygen barrier properties of the PLA food packaging. To address this issue, we design a sandwich-architectured PLA-graphene composite film, which utilizes an impermeable reduced graphene oxide (rGO) as the core barrier and commercial PLA films as the outer protective encapsulation. The synergy between the barrier and the protective encapsulation results in a significant 87.6% reduction in the water vapor permeability. At the same time, the oxygen permeability is reduced by two orders of magnitude when evaluated under both dry and humid conditions. The excellent barrier properties can be attributed to the compact lamellar microstructure and the hydrophobicity of the rGO core barrier. Mechanistic analysis shows that the large rGO lateral dimension and the small interlayer spacing between the rGO sheets have created an extensive and tortuous diffusion pathway, which is up to 1450-times the thickness of the rGO barrier. In addition, the sandwiched architecture has imbued the PLA-rGO composite film with good processability, which increases the manageability of the film and its competency to be tailored. Simulations using the PLA-rGO composite food packaging film for edible oil and potato chips also exhibit at least eight-fold extension in the shelf life of these oxygen and moisture sensitive food products. Overall, these qualities have demonstrated the high potential of a sandwich-architectured PLA-graphene composite film for food packaging applications.

  2. Computational model considering effects of process and experimental verification of compressive strength of the X-cor sandwich

    Science.gov (United States)

    Dang, X. D.; Jun, X.; Tan, Y. G.; Li, Y.; Yuan, Y. H.; Zhang, J. B.

    2008-11-01

    In order to increase the through-thickness compressive strength, pultruded carbon fiber pins are inserted into the ploymethacrylimide core of the sandwich, and then the X-cor sandwich is obtained. During curing process of the X-cor sandwich the forming of the residual stress is described in detail, the analytical results are that carbon fiber Z-pins preserve residually tensile stress in the end. Considering the effects of the residual stress Z-pins are treated as beams upon an elastic foundation, then a sort of compressive strength computational model of the X-cor sandwich is proposed and the compressive strength is computed. The X-cor sandwich samples of different density, diameter and angle of Z-pins are made for compressive strength experiments. Through the contrast between experimental and computational results the computational model is verified. As Z-pin's diameter and density increase the residual stress increase. While as Z-pin's angle increases the residual stress decrease.

  3. Validation and implementation of sandwich structure bottom plate to rib weld joint in the base section of ITER Cryostat

    Energy Technology Data Exchange (ETDEWEB)

    Prajapati, Rajnikant, E-mail: rajnikant@iter-india.org [ITER-India, Institute For Plasma Research, A-29, GIDC Electronics Estate, Sector-25, Gandhinagar 382016 (India); Bhardwaj, Anil K.; Gupta, Girish; Joshi, Vaibhav; Patel, Mitul; Bhavsar, Jagrut; More, Vipul; Jindal, Mukesh; Bhattacharya, Avik; Jogi, Gaurav; Palaliya, Amit; Jha, Saroj; Pandey, Manish [ITER-India, Institute For Plasma Research, A-29, GIDC Electronics Estate, Sector-25, Gandhinagar 382016 (India); Jadhav, Pandurang; Desai, Hemal [Larsen & Toubro Limited, Heavy Engineering, Hazira Manufacturing Complex, Gujarat (India)

    2016-11-01

    Highlights: • ITER Cryostat base section sandwich structure bottom plate to rib weld joint is qualified through mock-up. • Established welding sequence was successfully implemented on all six sectors of cryostat base section. • Each layer liquid penetrant examination has been carried out for these weld joints and found satisfactory. - Abstract: Cryostat is a large stainless steel vacuum vessel providing vacuum environment to ITER machine components. The cryostat is ∼30 m in diameter and ∼30 m in height having variable thickness from 25 mm to 180 mm. Sandwich structure of cryostat base section withstands vacuum loading and limits the deformation under service conditions. Sandwich structure consists of top and bottom plates internally strengthened with radial and circular ribs. In current work, sandwich structure bottom plate to rib weld joint has been designed with full penetration joint as per ITER Vacuum Handbook requirement considering nondestructive examinations and welding feasibility. Since this joint was outside the scope of ASME Section VIII Div. 2, it was decided to validate through mock-up of bottom plate to rib joint. Welding sequence was established to control the distortion. Tensile test, macro-structural examination and layer by layer LPE were carried out for validation of this weld joint. However possibility of ultrasonic examination method was also investigated. The test results from the welded joint mock-up were found to confirm all code and specification requirements. The same was implemented in first sector (0–60°) of base section sandwich structure.

  4. Amorphous GeOx-Coated Reduced Graphene Oxide Balls with Sandwich Structure for Long-Life Lithium-Ion Batteries.

    Science.gov (United States)

    Choi, Seung Ho; Jung, Kyeong Youl; Kang, Yun Chan

    2015-07-01

    Amorphous GeOx-coated reduced graphene oxide (rGO) balls with sandwich structure are prepared via a spray-pyrolysis process using polystyrene (PS) nanobeads as sacrificial templates. This sandwich structure is formed by uniformly coating the exterior and interior of few-layer rGO with amorphous GeOx layers. X-ray photoelectron spectroscopy analysis reveals a Ge:O stoichiometry ratio of 1:1.7. The amorphous GeOx-coated rGO balls with sandwich structure have low charge-transfer resistance and fast Li(+)-ion diffusion rate. For example, at a current density of 2 A g(-1), the GeOx-coated rGO balls with sandwich and filled structures and the commercial GeO2 powders exhibit initial charge capacities of 795, 651, and 634 mA h g(-1), respectively; the corresponding 700th-cycle charge capacities are 758, 579, and 361 mA h g(-1). In addition, at a current density of 5 A g(-1), the rGO balls with sandwich structure have a 1600th-cycle reversible charge capacity of 629 mA h g(-1) and a corresponding capacity retention of 90.7%, as measured from the maximum reversible capacity at the 100th cycle.

  5. Thermal-mechanical behavior of sandwich panels with closed-cell foam core under intensive laser irradiation

    Directory of Open Access Journals (Sweden)

    Li Zhi-Qiang

    2014-01-01

    Full Text Available Temperature field and thermal deformation of sandwich panels with closed-cell aluminum alloy foam core and heat-protective layer, which are subjected to Gaussian laser beam intensively irradiating, are investigated numerically. In transient heat analysis models, the influence of thermal conductivity, specific heat, and thickness of heat-protective layer on the temperature rise of the sandwich panels is calculated. In stress analysis models, a sequence coupled numerical method is utilized to simulate the thermal stress and deformation of sandwich panels induced by thermal expansion. Simulation results indicate that the temperature at center of sandwich panel increases firstly and then drops gradually with the increase of thermal conductivity of heat-protective layer after laser irradiation, and the critical thermal conductivity is obtained, while it decreases with the increase of specific heat and thickness of heat-protective layer. The thermal stress verifies the “Cyclo-hoop effect”, i. e. radial stress is compression stress in “hot zone” and tension stress in “cold zone”. The max thermal deformation of sandwich panels slightly increases with the increase of thickness of heat-protective layer for given specific heat and thermal conductivity.

  6. Experimental Validation of the Transverse Shear Behavior of a Nomex Core for Sandwich Panels

    Science.gov (United States)

    Farooqi, M. I.; Nasir, M. A.; Ali, H. M.; Ali, Y.

    2017-05-01

    This work deals with determination of the transverse shear moduli of a Nomex® honeycomb core of sandwich panels. Their out-of-plane shear characteristics depend on the transverse shear moduli of the honeycomb core. These moduli were determined experimentally, numerically, and analytically. Numerical simulations were performed by using a unit cell model and three analytical approaches. Analytical calculations showed that two of the approaches provided reasonable predictions for the transverse shear modulus as compared with experimental results. However, the approach based upon the classical lamination theory showed large deviations from experimental data. Numerical simulations also showed a trend similar to that resulting from the analytical models.

  7. Fatigue Debond Growth in Sandwich Structures Loaded in Mixed Mode Bending (MMB)

    DEFF Research Database (Denmark)

    Quispitupa, Amilcar; Berggreen, Christian; Carlsson, Leif A.

    2008-01-01

    the fracture toughness of the debonded sandwich specimens at different mixed mode loadings. The mixed mode ratio (mode I to mode II) was controlled by changing the lever arm distance of the MMB test rig. Compliance technique and visual inspection was employed to measure the crack length during fatigue. Fatigue...... tests were performed at 90% of the static fracture toughness at a loading ratio of R=0.1. Fatigue results revealed higher debond crack growth rates when the lever arm distance was increased. For some specimens, the crack propagated just below the face/core interface in the foam core and for others...... the crack kinked into the face sheet....

  8. Fatigue Failure of Sandwich Beams with Wrinkle Defects Used for Wind Turbine Blades

    DEFF Research Database (Denmark)

    Leong, Martin Klitgaard; Hvejsel, C.F.; Lund, Erik

    2012-01-01

    Glass fiber face sheet/balsa wood core sandwich beams with out-of-plane fiber misalignments/wrinkle defects were subjected to in-plane fully reversed fatigue loading and the failure modes were documented. A fatigue life design limit was estimated using finite element analyses and the Northwestern...... University failure theory. The presence of the wrinkle defect significantly lowered the fatigue strength, but it was found that the test specimens could reach a pre-defined fatigue life with no signs of damage, by applying a fatigue load below 80% of the estimated design limit....

  9. Application of air-coupled acoustic thermography (ACAT) for inspection of honeycomb sandwich structures

    Science.gov (United States)

    Zalameda, Joseph N.; Winfree, William P.; Pergantis, Charles G.; DeSchepper, Daniel; Flanagan, David

    2009-05-01

    The application of a noncontact air coupled acoustic heating technique is investigated for the inspection of advanced honeycomb composite structures. A weakness in the out of plane stiffness of the structure, caused by a delamination or core damage, allows for the coupling of acoustic energy and thus this area will have a higher temperature than the surrounding area. Air coupled acoustic thermography (ACAT) measurements were made on composite sandwich structures with damage and were compared to conventional flash thermography. A vibrating plate model is presented to predict the optimal acoustic source frequency. Improvements to the measurement technique are also discussed.

  10. Application of Air Coupled Acoustic Thermography (ACAT) for Inspection of Honeycomb Sandwich Structures

    Science.gov (United States)

    Winfree, William P.; Zalameda, Joseph N.; Pergantis, Charles; Flanagan, David; Deschepper, Daniel

    2009-01-01

    The application of a noncontact air coupled acoustic heating technique is investigated for the inspection of advanced honeycomb composite structures. A weakness in the out of plane stiffness of the structure, caused by a delamination or core damage, allows for the coupling of acoustic energy and thus this area will have a higher temperature than the surrounding area. Air coupled acoustic thermography (ACAT) measurements were made on composite sandwich structures with damage and were compared to conventional flash thermography. A vibrating plate model is presented to predict the optimal acoustic source frequency. Improvements to the measurement technique are also discussed.

  11. The Effect of Temperature on Faceplate/Core Delamination in Composite/Titanium Sandwich Plates

    Science.gov (United States)

    Liechti, Kenneth M.; Marton, Balazs

    2000-01-01

    A study was made of the delamination behavior of sandwich beams made of titanium core bonded to face-plates that consisted of carbon fiber reinforced polymer composite. Nominally mode I behavior was considered at 23C and 180C, by making use of a specially reinforced double cantilever (DCB) specimens. The toughness of the bond between the faceplate and the core was determined on the basis of a beam on elastic foundation analysis. The specimen compliance, and toughness were all independent of temperature in these relatively short-term experiments. The fracture mechanism showed temperature dependence, due to the hygrothermal sensitivity of the adhesive.

  12. Vibroacoustic Response of a Double-Walled Cylindrical FGM Shell with a Porous Sandwiched Layer

    Science.gov (United States)

    Ramezani, H.; Talebitooti, R.

    2015-11-01

    The transmission loss of sound through a cylindrical structure whose walls sandwich a layer of porous material is predicted on the basis of the classical shell theory for shells made of functionally graded materials (FGMs). FGM shells composed of metal and ceramic, with three different distributions (power-law, sigmoid, or exponential) of their volume fractions across the wall thickness, are considered. The porous layer is modeled as a fluid with equivalent properties. The transmission loss through the multilayered structure is obtained analytically in a broad frequency band. To validate the results found, they are compared with some known ones. The effects of variation in the volume fractions of materials are also studied.

  13. Effects of Structural Damage on Dynamic Behavior at Sandwich Composite Beams - Part I-Theoretical Approach

    Directory of Open Access Journals (Sweden)

    Tufoi Marius

    2014-07-01

    Full Text Available This paper series presents an analysis regarding the dynamics of sandwich composite beams, embedded at one end, in order to highlight the effect of geometrical and material discontinuities upon the natural frequencies. In first part (Part I, analysis was performed with EulerBernoulli analytical method for determining the vibration modes and in second part (Part II, analysis was performed with numerical simulation in SolidWorks software for a five-layer composite. In the last section of the paper, an example is shown regarding how to interpret the obtained results.

  14. Switching behaviors of butadienimine molecular devices sandwiched between graphene nanoribbons electrodes

    Science.gov (United States)

    Xia, Cai-Juan; Ye, Meng; Zhang, Bo-Qun; Su, Yao-Heng; Tu, Zhe-Yan

    2017-10-01

    The switching behavior of butadienimine molecule with two tautomeric forms sandwiched between different graphene nanoribbons (GNRs) electrodes are investigated by applying nonequilibrium Green’s function formalism combined with first-principles density functional theory. The calculated results show that the edge geometry of GNRs electrodes play a significant role in determining the electronic transport properties and switching behavior of the butadienimine molecular junctions. A higher current switching ratio can be obtained for the molecular junctions with zigzag edged graphene nanoribbons, which suggests that this system has a broader application in future logic and memory devices.

  15. Use of compact sandwich specimen to determine the critical strain energy release rate of bone.

    Science.gov (United States)

    Paruchuru, S P; Wang, X; Agrawal, C M

    2007-01-01

    The current methods to measure bone fracture toughness were initially developed for engineering materials and use specimen configurations that demand large samples. However, in many cases it is hard if not impossible to obtain such specimens from limited bone stock. Therefore, a new compact sandwich (CS) test method was formulated to measure the critical strain energy release rate (a measure of fracture toughness) of bone requiring only small samples. This technique may be used to assess bone fracture toughness and subsequently the bone quality.

  16. Finite Element Analysis of the SciFi-Nomex-Sandwich Panels

    CERN Document Server

    Schultz von Dratzig, Arndt

    2015-01-01

    A finite element analysis of the SciFi-Nomex-sandwich panels has been carried out in order to investigate their thermo-mechanical properties. This does not include the cooling of the silicon photomultipliers but is restricted to the panels themselves. Two kinds of panels have been considered: panels with 40 mm thickness and panels with 50 mm thickness. Both versions are equipped with mats of six layers of scintillating fibers. The analyses were carried out for a series of mechanical and thermal loads which might occur during the production or installation of the detector. For both versions the stiffnesses prove to be sufficient and no critical stresses or strains are found.

  17. Interface fatigue crack propagation in sandwich X-joints – Part II: Finite element modeling

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian

    2013-01-01

    The aim of the second and final part of this study is to simulate fatigue crack growth in the tested Sandwich Tear Test specimens, described in Part I, using the finite element method. To accelerate the simulation, a cycle jump method is utilized and implemented in the finite element routine....... The proposed method is based on conducting finite element analysis for a set of cycles to establish a trend line, extrapolating the trend line spanning many cycles, and use the extrapolated state as initial state for additional finite element simulations. The measured da/dN relations of the face/core interface...

  18. Low-energy impact resistance of graphite-epoxy plates and ALS honeycomb sandwich panels

    Science.gov (United States)

    Hui, David

    1989-01-01

    Low energy impact may be potentially dangerous for many highly optimized stiff structures. Impact by foreign objects such as birds, ice, and runways stones or dropping of tools occur frequently and the resulting damage and stress concentrations may be unacceptable from a designer's standpoint. The barely visible, yet potentially dangerous dents due to impact of foreign objects on the Advanced Launch System (ALS) structure are studied. Of particular interest is the computation of the maximum peak impact force for a given impactor mass and initial velocity. The theoretical impact forces will be compared with the experimental dropweight results for the ALS face sheets alone as well as the ALS honeycomb sandwich panels.

  19. Generation of quasi-monoenergetic carbon ions accelerated parallel to the plane of a sandwich target

    Science.gov (United States)

    Wang, J. W.; Murakami, M.; Weng, S. M.; Xu, H.; Ju, J. J.; Luan, S. X.; Yu, W.

    2014-12-01

    A new ion acceleration scheme, namely, target parallel Coulomb acceleration, is proposed in which a carbon plate sandwiched between gold layers is irradiated with intense linearly polarized laser pulses. The high electrostatic field generated by the gold ions efficiently accelerates the embedded carbon ions parallel to the plane of the target. The ion beam is found to be collimated by the concave-shaped Coulomb potential. As a result, a quasi-monoenergetic and collimated C6+-ion beam with an energy exceeding 10 MeV/nucleon is produced at a laser intensity of 5 × 1019 W/cm2.

  20. Sandwich ELISA for quantitative detection of human collagen prolyl 4-hydroxylase

    Directory of Open Access Journals (Sweden)

    Myllyharju Johanna

    2010-06-01

    Full Text Available Abstract Background We describe a method for specific, quantitative and quick detection of human collagen prolyl 4-hydroxylase (C-P4H, the key enzyme for collagen prolyl-4 hydroxylation, in crude samples based on a sandwich ELISA principle. The method is relevant to active C-P4H level monitoring during recombinant C-P4H and collagen production in different expression systems. The assay proves to be specific for the active C-P4H α2β2 tetramer due to the use of antibodies against its both subunits. Thus in keeping with the method C-P4H is captured by coupled to an anti-α subunit antibody magnetic beads and an anti-β subunit antibody binds to the PDI/β subunit of the protein. Then the following holoenzyme detection is accomplished by a goat anti-rabbit IgG labeled with alkaline phosphatase which AP catalyzes the reaction of a substrate transformation with fluorescent signal generation. Results We applied an experimental design approach for the optimization of the antibody concentrations used in the sandwich ELISA. The assay sensitivity was 0.1 ng of C-P4H. The method was utilized for the analysis of C-P4H accumulation in crude cell extracts of E. coli overexpressing C-P4H. The sandwich ELISA signals obtained demonstrated a very good correlation with the detected protein activity levels measured with the standard radioactive assay. The developed assay was applied to optimize C-P4H production in E. coli Origami in a system where the C-P4H subunits expression acted under control by different promoters. The experiments performed in a shake flask fed-batch system (EnBase® verified earlier observations that cell density and oxygen supply are critical factors for the use of the inducer anhydrotetracycline and thus for the soluble C-P4H yield. Conclusions Here we show an example of sandwich ELISA usage for quantifying multimeric proteins. The method was developed for monitoring the amount of recombinant C-P4H tetramer in crude E. coli extracts. Due

  1. Ultimate Failure of Debond Damaged Sandwich Panels Loaded with Lateral Pressure

    DEFF Research Database (Denmark)

    Jolma, Perttu; Segercrantz, Sebastian; Berggreen, Christian

    2007-01-01

    In this study a tool for assessing residual strength of debond damaged laterally loaded sandwich panels is developed. The analysis tool consists of a parametric finite element model and a fracture mechanics calculation procedure to determine the residual strength. The parametric approach allows...... with a number of different ship type panels. Debond criticality is evaluated by using the developed tool and by comparing the test results from panel experiments. The comparison shows that the analysis tool predicts both failure load and failure mode well. The tool can be used to determine the residual strength...

  2. Employment of a metal microgrid as a front electrode in a sandwich-structured photodetector.

    Science.gov (United States)

    Zhang, Junying; Cai, Chao; Pan, Feng; Hao, Weichang; Zhang, Weiwei; Wang, Tianmin

    2009-07-01

    A highly UV-transparent metal microgrid was prepared and employed as the front electrode in a sandwich-structured ultraviolet (UV) photodetector using TiO(2) thin film as the semiconductor layer. The photo-generated charger carriers travel a shorter distance before reaching the electrodes in comparison with a photodetector using large-spaced interdigitated metal electrodes (where distance between fingers is several to tens of micrometers) on the surface of the semiconductor film. This photodetector responds to UV light irradiation, and the photocurrent intensity increases linearly with the irradiation intensity below 0.2 mW/cm(2).

  3. On the Effect of Curvature in Debonded Sandwich Panels Subjected to Compressive Loading

    DEFF Research Database (Denmark)

    Moslemian, Ramin; Berggreen, Christian; Branner, Kim

    2008-01-01

    with a circular debond. The Crack Surface Displacement Extrapolation (CSDE) method is used to calculate fracture parameters in the interface. Compression tests were carried out on two types of debonded curved panels with different curvature using Digital Image Correlation (DIC) measurements to determine the full......The aim of this study is to obtain an understanding of the effect of panel curvature on residual compressive strength in debond damaged sandwich panels. Finite element analysis and linear elastic fracture mechanics are employed to analyze the residual compressive strength of curved panels...

  4. Testing and evaluation of a slot and tab construction technique for light-weight wood-fiber-based structural panels under bending

    Science.gov (United States)

    Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

    2015-01-01

    This paper presented construction and strain distributions for light-weight wood-fiber-based structural panels with tri-grid core made from phenolic impregnated laminated paper composites under bending. A new fastening configuration of slots in the faces and tabs on the core was applied to the face/core interfaces of the sandwich panel in addition to epoxy resin. Both...

  5. Estágio Sanduiche na Noruega: relato de experiência Práctica sandwich en Noruega: relato de experiencia Sandwich stage in Norway: experience report

    Directory of Open Access Journals (Sweden)

    Elaine Drehmer de Almeida Cruz

    2012-01-01

    Full Text Available O Programa de Doutorado no Brasil com Estágio no Exterior, conhecido como Doutorado Sanduíche, visa a contribuir para intercâmbios dos cursos de Pós-Graduação no País com seus congêneres no exterior. O objetivo deste artigo foi relatar a experiência vivida durante o estágio realizado na Noruega, em unidades hospitalares, laboratórios de microbiologia, órgãos federais e serviços de saúde de Oslo e Região Metropolitana. Foram desenvolvidas atividades de vigilância epidemiológica, técnicas laboratoriais de identificação e tipagem molecular de Staphylococcus aureus e políticas públicas e institucionais de prevenção e controle dessas bactérias, quando multirresistentes. O estágio, além de subsidiar e fortalecer a análise dos dados do projeto da tese, permitiu refletir sobre a importância de políticas públicas e diretrizes definidas, e fornecer condições para ações de prevenção e controle de agravos, tendo a saúde e o bem-estar da pessoa como valores de Estado.El Programa de Doctorado en el Brasil con Prácticas en el Exterior, conocido como Doctorado Sandwich, visa contribuir a los intercambios de los cursos de Postgrado en el País con sus congéneres en el exterior. El objetivo de este artículo fue relatar la experiencia vivida durante las prácticas realizadas en Noruega, en unidades hospitalarias, laboratorios de microbiologia, órganos federales y servicios de salud de Oslo y Región Metropolitana. Se desarrollaron actividades de vigilancia epidemiológica, técnicas de laboratorio de identificación y tipaje molecular de Staphylococcus aureus y políticas públicas e institucionales de prevención y control de esas bacterias, multiresistentes. La práctica, además de ofrecer subsídios y fortalecer al análisis de los datos del proyecto de la tesis, permitió reflexionar sobre la importancia de las políticas públicas y directivas definidas, y dar las condiciones para acciones de prevención y control

  6. The Application of Statistical Design of Experiments to Study the In-Plane Shear Behaviour of Hybrid Composite Sandwich Panel

    Directory of Open Access Journals (Sweden)

    Fajrin J.

    2016-03-01

    Full Text Available This paper presents a statistical aspect of experimental study on the in-plane shear behaviour of hybrid composite sandwich panel with intermediate layer. The study was aimed at providing information of how significant the contribution of intermediate layer to the in-plane shear behaviour of new developed sandwich panel. The investigation was designed as a single factor experimental design and the results were throughly analysed with statistics software; Minitab 15. The panels were tested by applying a tensile force along the diagonal of the test frame simulating pure shear using a 100 kN MTS servo-hydraulic UTM. The result shows that the incorporation of intermediate layer has sinificantly enhanced the in-plane shear behaviour of hybrid composite sandwich panel. The statistical analysis shows that the value of F0 is much higher than the value of Ftable, which has a meaning that the improvement provided by the incorporation of intermediate layer is statistically significant.

  7. Non-linear Dynamic Analysis of Steel Hollow I-core Sandwich Panel under Air Blast Loading

    Directory of Open Access Journals (Sweden)

    Asghar Vatani Oskouei

    2015-12-01

    Full Text Available In this paper, the non-linear dynamic response of novel steel sandwich panel with hollow I-core subjected to blast loading was studied. Special emphasis is placed on the evaluation of midpoint displacements and energy dissipation of the models. Several parameters such as boundary conditions, strain rate, mesh dependency and asymmetrical loading are considered in this study. The material and geometric non-linearities are also considered in the numerical simulation. The results obtained are compared with available experimental data to verify the developed FE model. Modeling techniques are described in detail. According to the results, sandwich panels with hollow I-core allowed more plastic deformation and energy dissipation and less midpoint displacement than conventional I-core sandwich panels and also equivalent solid plate with the same weight and material.

  8. Experimental investigation of interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device

    DEFF Research Database (Denmark)

    Martakos, G.; Andreasen, J.H.; Berggreen, Christian

    2017-01-01

    A recently proposed face-sheet–core interface crack arresting device is implemented in sandwich beams and tested using the Sandwich Tear Test configuration. Fatigue loading conditions are applied to propagate the crack and determine the effect of the crack stopper on the fatigue growth rate...... and arrest of the crack. Digital image correlation is used through the duration of the fatigue experiment to track the strain evolution as the crack tip advances. The measured strains are related to crack tip propagation, arrest, and re-initiation of the crack. A finite element model is used to calculate...... the energy release rate, mode mixity and to simulate crack propagation and arrest of the crack. Finally, the effectiveness of the crack arresting device is demonstrated on composite sandwich beams subjected to fatigue loading conditions....

  9. Mechanical Property Evaluation of Palm/Glass Sandwiched Fiber Reinforced Polymer Composite in Comparison with few natural composites

    Science.gov (United States)

    Raja Dhas, J. Edwin; Pradeep, P.

    2017-10-01

    Natural fibers available plenty can be used as reinforcements in development of eco friendly polymer composites. The less utilized palm leaf stalk fibers sandwiched with artificial glass fibers was researched in this work to have a better reinforcement in preparing a green composite. The commercially available polyester resin blend with coconut shell filler in nano form was used as matrix to sandwich these composites. Naturally available Fibers of palm leaf stalk, coconut leaf stalk, raffia and oil palm were extracted and treated with potassium permanganate solution which enhances the properties. For experimentation four different plates were fabricated using these fibers adopting hand lay-up method. These sandwiched composite plates are further machined to obtain ASTM standards Specimens which are mechanically tested as per standards. Experimental results reveal that the alkali treated palm leaf stalk fiber based polymer composite shows appreciable results than the others. Hence the developed composite can be recommended for fabrication of automobile parts.

  10. An Investigation into the Application of Generalized Differential Quadrature Method to Bending Analysis of Composite Sandwich Plates

    Science.gov (United States)

    Ghassemi, Aazam; Yazdani, Mostafa; Hedayati, Mohamad

    2017-12-01

    In this work, based on the First Order Shear Deformation Theory (FSDT), an attempt is made to explore the applicability and accuracy of the Generalized Differential Quadrature Method (GDQM) for bending analysis of composite sandwich plates under static loading. Comparative studies of the bending behavior of composite sandwich plates are made between two types of boundary conditions for different cases. The effects of fiber orientation, ratio of thickness to length of the plate, the ratio of thickness of core to thickness of the face sheet are studied on the transverse displacement and moment resultants. As shown in this study, the role of the core thickness in deformation of these plates can be reversed by the stiffness of the core in comparison with sheets. The obtained graphs give very good results due to optimum design of sandwich plates. In Comparison with existing solutions, fast convergent rates and high accuracy results can be achieved by the GDQ method.

  11. A chemically stable electrolyte with a novel sandwiched structure for proton-conducting solid oxide fuel cells (SOFCs)

    KAUST Repository

    Bi, Lei

    2013-11-01

    A chemically stable electrolyte structure was developed for proton-conducting SOFCs by using two layers of stable BaZr0.7Pr 0.1Y0.2O3 -δ to sandwich a highly-conductive but unstable BaCe0.8Y0.2O 3 -δ electrolyte layer. The sandwiched electrolyte structure showed good chemical stability in both CO2 and H2O atmosphere, indicating that the BZPY layers effectively protect the inner BCY electrolyte, while the BCY electrolyte alone decomposed completely under the same conditions. Fuel cell prototypes fabricated with the sandwiched electrolyte achieved a relatively high performance of 185 mW cm- 2 at 700 C, with a high electrolyte film conductivity of 4 × 10- 3 S cm- 1 at 600 C. © 2013 Elsevier B.V.

  12. Interfacial crack arrest in sandwich beams subjected to fatigue loading using a novel crack arresting device – Numerical modelling

    DEFF Research Database (Denmark)

    Martakos, G.; Andreasen, J.H.; Berggreen, Christian

    2017-01-01

    fatigue test study. Based on a linear elastic fracture mechanics approach, the developed FE model is utilised to simulate crack propagation and arrest in foam-cored sandwich beam specimens subjected to fatigue loading conditions. The effect of the crack arresters on the fatigue life is analysed......A novel crack arresting device is implemented in foam-cored composite sandwich beams and tested using the Sandwich Tear Test (STT) configuration. A finite element model of the setup is developed, and the predictions are correlated with observations and results from a recently conducted experimental......, and the predictive results are subsequently compared with the observations from the previously conducted fatigue tests. The FE model predicts the energy release rate and the mode mixity based on the derived crack surface displacements, utilising algorithms for the prediction of accelerated fatigue crack growth...

  13. A Robust Multifunctional Sandwich Panel Design with Trabecular Structures by the Use of Additive Manufacturing Technology for a New De-Icing System

    Directory of Open Access Journals (Sweden)

    Carlo Giovanni Ferro

    2017-06-01

    Full Text Available Anti-ice systems assure a vital on-board function in most aircraft: ice prevention or de-icing is mandatory for all aerodynamic surfaces to preserve their performance, and for all the movable surfaces to allow the proper control of the plane. In this work, a novel multi-functional panel concept which integrates anti-icing directly inside the primary structure is presented. In fact, constructing the core of the sandwich with trabecular non-stochastic cells allows the presence of a heat exchanger directly inside the structure with a savings in weight and an improvement in thermal efficiency. This solution can be realized easily in a single-piece component using Additive Manufacturing (AM technology without the need for joints, gluing, or welding. The objective of this study is to preliminarily investigate the mechanical properties of the core constructed with Selective Laser Melting (SLM; through the Design of Experiment (DOE, different design parameters were varied to understand how they affect the compression behaviour.

  14. Electrochemical sandwich assay for attomole analysis of DNA and RNA from beer spoilage bacteria Lactobacillus brevis.

    Science.gov (United States)

    Shipovskov, Stepan; Saunders, Aaron M; Nielsen, Jesper S; Hansen, Majken H; Gothelf, Kurt V; Ferapontova, Elena E

    2012-01-01

    Attomole (10(-18)mol) levels of RNA and DNA isolated from beer spoilage bacterial cells Lactobacillus brevis have been detected by the electrochemical sandwich DNA hybridization assay exploiting enzymatic activity of lipase. DNA sequences specific exclusively to L. brevis DNA and RNA were selected and used for probe and target DNA design. The assay employs magnetic beads (MB) modified with a capture DNA sequence and a reporter DNA probe labeled with the enzyme, both made to be highly specific for L. brevis DNA. Lipase-labeled DNAs captured on MBs in the sandwich assay were collected on gold electrodes modified with a ferrocene (Fc)-terminated SAM formed by aliphatic esters. Lipase hydrolysis of the ester bond released a fraction of the Fc redox active groups from the electrode surface, decreasing the electrochemical signal from the surface-confined Fc. The assay, shown to be efficient for analysis of short synthetic DNA sequences, was ineffective with genomic double stranded bacterial DNA, but it allowed down to 16 amole detection of 1563 nts long RNA, isolated from bacterial ribosomes without the need for PCR amplification, and single DNA strands produced from ribosomal RNA. No interference from E. coli RNA was registered. The assay allowed analysis of 400 L. brevis cells isolated from 1L of beer, which fits the "alarm signal" range (from 1 to 100 cells per 100mL). Copyright © 2012 Elsevier B.V. All rights reserved.

  15. On the assumption of transverse isotropy of a honeycomb sandwich panel for NDT applications

    Science.gov (United States)

    Schaal, Christoph; Tai, Steffen; Mal, Ajit

    2017-04-01

    Due to their excellent strength-to-weight ratio, honeycomb sandwich panels are being increasingly used in lightweight structures, in particular in aircraft and aerospace industry. Delaminations of individual plies in the composite skins or disbonds of a layer in the multi-layer plate structures often remain undetected during visual inspection. Using guided ultrasonic waves, such hidden defects can be detected. For the successful application of ultrasonic nondestructive testing methods, however, wave propagation characteristics have to be well-understood. Recently developed semi-analytical techniques allow for the calculation of dispersion characteristics for many materials. However, the elastic material behavior is often simplified for these calculations. For example, woven composite laminates are modeled as a homogeneous, transversely isotropic plate. While these simplifications only lead to minor errors, the modeling of aluminum honeycomb core sandwich panels with homogeneous, transversely isotropic layers has yet to be validated. In this paper, an efficient numerical approach is used to determine the dispersion characteristics of a honeycomb core layer with and without simplified material behavior. A full 3D-model, including the honeycomb cells, of a small representative volume element of the material is generated using finite elements, and the resulting dispersion curves are compared to the ones obtained from simplified models. In addition to dispersion curves, the displacement fields of the waves are also analyzed.

  16. Negligible environmental sensitivity of graphene in a hexagonal boron nitride/graphene/h-BN sandwich structure.

    Science.gov (United States)

    Wang, Lei; Chen, Zheyuan; Dean, Cory R; Taniguchi, Takashi; Watanabe, Kenji; Brus, Louis E; Hone, James

    2012-10-23

    Using Raman spectroscopy, we study the environmental sensitivity of mechanically exfoliated and electrically floating single-layer graphene transferred onto a hexagonal boron nitride (h-BN) substrate, in comparison with graphene deposited on a SiO(2) substrate. In order to understand and isolate the substrate effect on graphene electrical properties, we model and correct for Raman optical interference in the substrates. As-deposited and unannealed graphene shows a large I(2D)/I(G) ratio on both substrates, indicating extremely high quality, close to that of graphene suspended in vacuum. Thermal annealing strongly activates subsequent environmental sensitivity on the SiO(2) substrate; such activation is reduced but not eliminated on the h-BN substrate. In contrast, in a h-BN/graphene/h-BN sandwich structure, with graphene protected on both sides, graphene remains pristine despite thermal processing. Raman data provide a deeper understanding of the previously observed improved graphene electrical conductivity on h-BN substrates. In the sandwich structure, the graphene 2D Raman feature has a higher frequency and narrower line width than in pristine suspended graphene, implying that the local h-BN environment modestly yet measurably changes graphene electron and phonon dispersions.

  17. Laser cutting sandwich structure glass-silicon-glass wafer with laser induced thermal-crack propagation

    Science.gov (United States)

    Cai, Yecheng; Wang, Maolu; Zhang, Hongzhi; Yang, Lijun; Fu, Xihong; Wang, Yang

    2017-08-01

    Silicon-glass devices are widely used in IC industry, MEMS and solar energy system because of their reliability and simplicity of the manufacturing process. With the trend toward the wafer level chip scale package (WLCSP) technology, the suitable dicing method of silicon-glass bonded structure wafer has become necessary. In this paper, a combined experimental and computational approach is undertaken to investigate the feasibility of cutting the sandwich structure glass-silicon-glass (SGS) wafer with laser induced thermal-crack propagation (LITP) method. A 1064 nm semiconductor laser cutting system with double laser beams which could simultaneously irradiate on the top and bottom of the sandwich structure wafer has been designed. A mathematical model for describing the physical process of the interaction between laser and SGS wafer, which consists of two surface heating sources and two volumetric heating sources, has been established. The temperature stress distribution are simulated by using finite element method (FEM) analysis software ABAQUS. The crack propagation process is analyzed by using the J-integral method. In the FEM model, a stationary planar crack is embedded in the wafer and the J-integral values around the crack front edge are determined using the FEM. A verification experiment under typical parameters is conducted and the crack propagation profile on the fracture surface is examined by the optical microscope and explained from the stress distribution and J-integral value.

  18. Metal-Organic Frameworks (MOFs) as Sandwich Coating Cushion for Silicon Anode in Lithium Ion Batteries.

    Science.gov (United States)

    Han, Yuzhen; Qi, Pengfei; Zhou, Junwen; Feng, Xiao; Li, Siwu; Fu, Xiaotao; Zhao, Jingshu; Yu, Danni; Wang, Bo

    2015-12-09

    A novel metal-organic framework (MOF) sandwich coating method (denoted as MOF-SC) is developed for hybrid Li ion battery electrode preparation, in which the MOF films are casted on the surface of a silicon layer and sandwiched between the active silicon and the separator. The obtained electrodes show improved cycling performance. The areal capacity of the cheap and readily available microsized Si treated with MOF-SC can reach 1700 μAh cm(-2) at 265 μA cm(-2) and maintain at 850 μAh cm(-2) after 50 cycles. Beyond the above, the commercial nanosized Si treated by MOF-SC also shows greatly enhanced areal capacity and outstanding cycle stability, 600 μAh cm(-2) for 100 cycles without any apparent fading. By virtue of the novel structure prepared by the MOFs, this new MOF-SC structure serves as an efficient protection cushion for the drastic volume change of silicon during charge/discharge cycles. Furthermore, this MOF layer, with large pore volume and high surface area, can adsorb electrolyte and allow faster diffusion of Li(+) as evidenced by decreased impedance and improved rate performance.

  19. Sandwich wound closure reduces the risk of cerebrospinal fluid leaks in posterior fossa surgery

    Directory of Open Access Journals (Sweden)

    Verena Heymanns

    2016-07-01

    Full Text Available Posterior fossa surgery is demanding and hides a significant number of obstacles starting from the approach to the wound closure. The risk of cerebrospinal fluid (CSF leakage in posterior fossa surgery given in the literature is around 8%. The present study aims to introduce a sandwich closure of the dura in posterior fossa surgery, which reduces significantly the number of CSF leaks (3.8% in the patients treated in our department. Three hundred and ten patients treated in our hospital in the years 2009-2013 for posterior fossa pathologies were retrospectively evaluated. The dura closure method was as following: lyophilized dura put under the dura and sealed with fibrin glue and sutures, dura adapting stitches, TachoSil® (Takeda Pharma A/S, Roskilde, Denmark, Gelfoam® (Pfizer Inc., New York, NY, USA and polymethylmethacrylate (osteoclastic craniotomy. The incidence of postsurgical complications associated with the dural closure like CSF leakage, infections, bleeding is evaluated. Only 3.8% of patients developed CSF leakage and only 0.5% needed a second surgery for CSF leakage closure. Two percent had a cerebellar bleeding with no need for re-operation and 3% had a wound infection treated with antibiotics. The sandwich wound closure we are applying for posterior fossa surgery in our patients correlates with a significant reduction of CSF leaks compared to the literature.

  20. Plastic-adherent DNA aptamer-magnetic bead and quantum dot sandwich assay for Campylobacter detection.

    Science.gov (United States)

    Bruno, John G; Phillips, Taylor; Carrillo, Maria P; Crowell, Randy

    2009-05-01

    DNA aptamers were developed against MgCl(2)-extracted surface proteins from Campylobacter jejuni. The two highest affinity aptamers were selected for use in a magnetic bead (MB) and red quantum dot (QD)-based sandwich assay scheme. The assay was evaluated using both heat-killed and live C. jejuni and exhibits detection limits as low as an average of 2.5 colony forming unit (cfu) equivalents in buffer and 10-250 cfu in various food matrices. The assay exhibits low cross-reactivity with bacterial species outside the Campylobacter genus, but exhibits substantial cross-reactivity with C. coli and C. lari. The assay was evaluated with a spectrofluorometer and a commercially available handheld fluorometer, which yielded comparable detection limits and ranges. Remarkably, the sandwich assay components adhere to the inside face of polystyrene cuvettes even in food matrices near neutral pH, thereby enabling a rapid homogeneous assay, because fluorescence is concentrated to a small, thin planar area and background fluorescence from the bulk solution is minimized. The plastic cuvette-adherent technology coupled to a sensitive handheld fluorometer may enable rapid (15-20 min), portable detection of foodborne pathogens from "farm-to-fork" by obviating the slow enrichment culture phase used by other food safety tests.

  1. Material Based Structure Design: Numerical Analysis Thermodynamic Response of Thermal Pyrolytic Graphite /Al Sandwich Composites

    Science.gov (United States)

    Wang, Junxia; Yan, Shilin; Yu, Dingshan

    2016-12-01

    Amine-grafted multiwalled carbon nanotubes (MWCNTs) based thermally conductive adhesive (TCA) was studied in the previous paper and applied here in thermal pyrolytic graphite (TPG)/Al radiator due to its high thermal conductivity, toughness and cohesiveness. In this paper, in an attempt to confirm the application of TCA to TPG/Al sandwich radiator, the thermodynamic response in TPG/Al sandwich composites associated with key material properties and structural design was investigated using finite element simulation with commercial available ANSYS software. The induced thermal stress in TCA layer is substantial due to the thermal expansion mismatch between Al plate and TPG. The maximum thermal stress is located near the edge of TCA layer with the von Mises stress value of 4.02 MPa and the shear stress value of 1.66 MPa. The reasonable adjustment of physical-mechanical properties including thermal conductivity, thermal expansion, Young,s modulus and the thickness of TCA layer, Al plate and TPG are beneficial for reducing the temperature of the top surface of the upper skin and their effects on the reduction of thermal structural response in some ways. These findings will highlight the structural optimization of TPG/Al radiator for future application.

  2. Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and GFRP Core

    Directory of Open Access Journals (Sweden)

    Hai Fang

    2016-01-01

    Full Text Available This study presented a new form of composite sandwich panels, with steel plates as facesheets and bonded glass fiber-reinforced polymer (GFRP pultruded hollow square tubes as core. In this novel panel, GFRP and steel were optimally combined to obtain high bending stiffness, strength, and good ductility. Four-point bending test was implemented to analyze the distribution of the stress, strain, mid-span deflection, and the ultimate failure mode. A section transformation method was used to evaluate the stress and the mid-span deflection of the sandwich panels. The theoretical values, experimental results, and FEM simulation values are compared and appeared to be in good agreement. The influence of thickness of steel facesheet on mid-span deflection and stress was simulated. The results showed that the mid-span deflection and stress decreased and the decent speed was getting smaller as the thickness of steel facesheet increases. A most effective thickness of steel facesheet was advised.

  3. Elevated Temperature, Residual Compressive Strength of Impact-Damaged Sandwich Structure Manufactured Out-of-Autoclave

    Science.gov (United States)

    Grimsley, Brian W.; Sutter, James K.; Burke, Eric R.; Dixon, Genevieve D.; Gyekenyesi, Thomas G.; Smeltzer, Stanley S.

    2012-01-01

    Several 1/16th-scale curved sandwich composite panel sections of a 10 m diameter barrel were fabricated to demonstrate the manufacturability of large-scale curved sections using minimum gauge, [+60/-60/0]s, toughened epoxy composite facesheets co-cured with low density (50 kilograms per cubic meters) aluminum honeycomb core. One of these panels was fabricated out of autoclave (OoA) by the vacuum bag oven (VBO) process using Cycom(Registered Trademark) T40-800b/5320-1 prepreg system while another panel with the same lay-up and dimensions was fabricated using the autoclave-cure, toughened epoxy prepreg system Cycom(Registered Trademark) IM7/977-3. The resulting 2.44 m x 2 m curved panels were investigated by non-destructive evaluation (NDE) at NASA Langley Research Center (NASA LaRC) to determine initial fabrication quality and then cut into smaller coupons for elevated temperature wet (ETW) mechanical property characterization. Mechanical property characterization of the sandwich coupons was conducted including edge-wise compression (EWC), and compression-after-impact (CAI) at conditions ranging from 25 C/dry to 150 C/wet. The details and results of this characterization effort are presented in this paper.

  4. Shape and Stress Sensing of Multilayered Composite and Sandwich Structures Using an Inverse Finite Element Method

    Science.gov (United States)

    Cerracchio, Priscilla; Gherlone, Marco; Di Sciuva, Marco; Tessler, Alexander

    2013-01-01

    The marked increase in the use of composite and sandwich material systems in aerospace, civil, and marine structures leads to the need for integrated Structural Health Management systems. A key capability to enable such systems is the real-time reconstruction of structural deformations, stresses, and failure criteria that are inferred from in-situ, discrete-location strain measurements. This technology is commonly referred to as shape- and stress-sensing. Presented herein is a computationally efficient shape- and stress-sensing methodology that is ideally suited for applications to laminated composite and sandwich structures. The new approach employs the inverse Finite Element Method (iFEM) as a general framework and the Refined Zigzag Theory (RZT) as the underlying plate theory. A three-node inverse plate finite element is formulated. The element formulation enables robust and efficient modeling of plate structures instrumented with strain sensors that have arbitrary positions. The methodology leads to a set of linear algebraic equations that are solved efficiently for the unknown nodal displacements. These displacements are then used at the finite element level to compute full-field strains, stresses, and failure criteria that are in turn used to assess structural integrity. Numerical results for multilayered, highly heterogeneous laminates demonstrate the unique capability of this new formulation for shape- and stress-sensing.

  5. External mean flow influence on sound transmission through finite clamped double-wall sandwich panels

    Science.gov (United States)

    Liu, Yu; Catalan, Jean-Cédric

    2017-09-01

    This paper studies the influence of an external mean flow on the sound transmission through finite clamped double-wall sandwich panels lined with poroelastic materials. Biot's theory is employed to describe wave propagation in poroelastic materials and various configurations of coupling the poroelastic layer to the facing plates are considered. The clamped boundary of finite panels are dealt with by the modal superposition theory and the weighted residual (Garlekin) method, leading to a matrix equation solution for the sound transmission loss (STL) through the structure. The theoretical model is validated against existing theories of infinite sandwich panels with and without an external flow. The numerical results of a single incident wave show that the external mean flow has significant effects on the STL which are coupled with the clamped boundary effect dominating in the low-frequency range. The external mean flow also influences considerably the limiting incidence angle of the panel system and the effect of the incidence angle on the STL. However, the influences of the azimuthal angle and the external flow orientation are negligible.

  6. Bulk-heterojunction organic solar cells sandwiched by solution processed molybdenum oxide and titania nanosheet layers

    Science.gov (United States)

    Itoh, Eiji; Goto, Yoshinori; Fukuda, Katsutoshi

    2014-02-01

    The contributions of ultrathin titania nanosheet (TN) crystallites were studied in both an inverted bulk-heterojunction (BHJ) cell in an indium-tin oxide (ITO)/titania nanosheet (TN)/poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methylester (PCBM) active layer/MoOx/Ag multilayered photovoltaic device and a conventional BHJ cell in ITO/MoOx/P3HT:PCBM active layer/TN/Al multilayered photovoltaic device. The insertion of only one or two layers of poly(diallyldimethylammonium chloride) (PDDA) and TN multilayered film prepared by the layer-by-layer deposition technique effectively decreased the leakage current and increased the open circuit voltage (VOC), fill factor (FF), and power conversion efficiency (η). The conventional cell sandwiched between a solution-processed, partially crystallized molybdenum oxide hole-extracting buffer layer and a TN electron extracting buffer layer showed comparable cell performance to a device sandwiched between vacuum-deposited molybdenum oxide and TN layers, whereas the inverted cell with solution-processed molybdenum oxide showed a poorer performance probably owing to the increment in the leakage current across the film. The abnormal S-shaped curves observed in the inverted BHJ cell above VOC disappeared with the use of a polyfluorene-based cationic semiconducting polymer as a substitute for an insulating PDDA film, resulting in the improved cell performance.

  7. Vibration and Acoustic Response of Rectangular Sandwich Plate under Thermal Environment

    Directory of Open Access Journals (Sweden)

    Yuan Liu

    2013-01-01

    Full Text Available In this paper, we focus on the vibration and acoustic response of a rectangular sandwich plate which is subjected to a concentrated harmonic force under thermal environment. The critical buckling temperature is obtained to decide the thermal load. The natural frequencies and modes as well as dynamic responses are acquired by using the analytical formulations based on equivalent non-classical theory, in which the effects of shear deformation and rotational inertia are taken into account. The rise of thermal load decreases the natural frequencies and moves response peaks to the low-frequency range. The specific features of sandwich plates with different formations are discussed subsequently. As the thickness ratio of facing to core increases, the natural frequencies are enlarged, and the response peaks float to the high-frequency region. Raising the Young's modulus of the core can cause the similar trends. The accuracy of the theoretical method is verified by comparing its results with those computed by the FEM/BEM.

  8. Quantum Monte Carlo Study of π-bonded Transition-metal Organometallic Sandwiches

    Science.gov (United States)

    Stich, Ivan; Horvathova, Lucia; Dubecky, Matus; Mitas, Lubos

    2013-03-01

    Accurate quantum Monte Carlo (QMC) calculations enabled us to determine the structure, spin multiplicity, ionization energy, dissociation energy, and spin-dependent electronic gaps of neutral and positively charged vanadium-benzene and cobalt-benzene half-sandwich and sandwich systems. The most intriguing application of these systems is as spin filters. For this purpose we have used a multi-stage combination of techniques with consecutive elimination of systematic biases except for the fixed-node approximation in QMC. The-fixed node approximation was treated at different levels from quantum chemistry (CAS-SCF) to various DFT schemes such as GGA, meta-GGA, hybrid, double-hybrid and local-hybrid functionals. While QMC results indicate a very limited predictive power of mean field DFT methods for this class of systems, QMC results are quite stable with fixed-node approximation based on several classes of DFT orbitals. Our results significantly differ from the established picture based on previous less accurate calculations and point out the importance of high-level many-body methods for predictive calculations of similar transition metal-based organometallic systems. Work supported by APVV-0091-07, APVV-0207-11, LPP-0392-09, and VEGA (2/0007/12) projects, and via CE SAS QUTE. Further support provided by ARO, NSF and DOE.

  9. Semi-active control of a sandwich beam partially filled with magnetorheological elastomer

    Science.gov (United States)

    Dyniewicz, Bartłomiej; Bajkowski, Jacek M.; Bajer, Czesław I.

    2015-08-01

    The paper deals with the semi-active control of vibrations of structural elements. Elastomer composites with ferromagnetic particles that act as magnetorheological fluids are used. The damping coefficient and the shear modulus of the elastomer increases when it is exposed to an electro-magnetic field. The control of this process in time allows us to reduce vibrations more effectively than if the elastomer is permanently exposed to a magnetic field. First the analytical solution for the vibrations of a sandwich beam filled with an elastomer is given. Then the control problem is defined and applied to the analytical formula. The numerical solution of the minimization problem results in a periodic, perfectly rectangular control function if free vibrations are considered. Such a temporarily acting magnetic field is more efficient than a constantly acting one. The surplus reaches 20-50% or more, depending on the filling ratio of the elastomer. The resulting control was verified experimentally in the vibrations of a cantilever sandwich beam. The proposed semi-active control can be directly applied to engineering vibrating structural elements, for example helicopter rotors, aircraft wings, pads under machines, and vehicles.

  10. Spin current valve effect in normal metal/magnetic insulator/normal metal sandwiches

    Science.gov (United States)

    Li, Junxue; Xu, Yadong; Aldosary, Mohammed; Tang, Chi; Lin, Zhisheng; Zhang, Shufeng; Lake, Roger; Shi, Jing; Shines Collaboration

    Pure spin current is generated in two common ways. One makes use of the spin Hall effect in normal metals (NM), the other utilizes spin waves with the quasi-particle excitations called magnons. A popular material for the latter is yttrium iron garnet (YIG), a magnetic insulator (MI). Here we demonstrate in NM/MI/NM sandwiches that these two types of spin current are interconvertible, which allows transmitting an electrical signal across the MI, predicted as the magnon-mediated current drag phenomenon. We show experimentally that the spin current can be switched ``on'' or ``off'' by controlling the magnetization orientation of MI, analogous to conventional spin valves for spin-polarized charge current. The transmitted current drag signal scales linearly with the driving current without any threshold and follows the power-law Tn with n ranging from 1.5 to 2.5. Our results indicate that the NM/MI/NM sandwich structure can serve as a scalable pure spin current valve device which is an essential ingredient in spintronics. As part of the SHINES, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # SC0012670.

  11. Hepatocyte function within a stacked double sandwich culture plate cylindrical bioreactor for bioartificial liver system.

    Science.gov (United States)

    Xia, Lei; Arooz, Talha; Zhang, Shufang; Tuo, Xiaoye; Xiao, Guangfa; Susanto, Thomas Adi Kurnia; Sundararajan, Janani; Cheng, Tianming; Kang, Yuzhan; Poh, Hee Joo; Leo, Hwa Liang; Yu, Hanry

    2012-11-01

    Bioartificial liver (BAL) system is promising as an alternative treatment for liver failure. We have developed a bioreactor with stacked sandwich culture plates for the application of BAL. This bioreactor design addresses some of the persistent problems in flat-bed bioreactors through increasing cell packing capacity, eliminating dead flow, regulating shear stress, and facilitating the scalability of the bioreactor unit. The bioreactor contained a stack of twelve double-sandwich-culture plates, allowing 100 million hepatocytes to be housed in a single cylindrical bioreactor unit (7 cm of height and 5.5 cm of inner diameter). The serial flow perfusion through the bioreactor increased cell-fluid contact area for effective mass exchange. With the optimal perfusion flow rate, shear stress was minimized to achieve high and uniform cell viabilities across different plates in the bioreactor. Our results demonstrated that hepatocytes cultured in the bioreactor could re-establish cell polarity and maintain liver-specific functions (e.g. albumin and urea synthesis, phase I&II metabolism functions) for seven days. The single bioreactor unit can be readily scaled up to house adequate number of functional hepatocytes for BAL development. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Effect of the Protein Corona on Antibody-Antigen Binding in Nanoparticle Sandwich Immunoassays.

    Science.gov (United States)

    de Puig, Helena; Bosch, Irene; Carré-Camps, Marc; Hamad-Schifferli, Kimberly

    2017-01-18

    We investigated the effect of the protein corona on the function of nanoparticle (NP) antibody (Ab) conjugates in dipstick sandwich immunoassays. Ab specific for Zika virus nonstructural protein 1 (NS1) were conjugated to gold NPs, and another anti-NS1 Ab was immobilized onto the nitrocellulose membrane. Sandwich immunoassay formation was influenced by whether the strip was run in corona forming conditions, i.e., in human serum. Strips run in buffer or pure solutions of bovine serum albumin exhibited false positives, but those run in human serum did not. Serum pretreatment of the nitrocellulose also eliminated false positives. Corona formation around the NP-Ab in serum was faster than the immunoassay time scale. Langmuir binding analysis determined how the immobilized Ab affinity for the NP-Ab/NS1 was impacted by corona formation conditions, quantified as an effective dissociation constant, K D eff . Results show that corona formation mediates the specificity and sensitivity of the antibody-antigen interaction of Zika biomarkers in immunoassays, and plays a critical but beneficial role.

  13. Debonding Stress Concentrations in a Pressurized Lobed Sandwich-Walled Generic Cryogenic Tank

    Science.gov (United States)

    Ko, William L.

    2004-01-01

    A finite-element stress analysis has been conducted on a lobed composite sandwich tank subjected to internal pressure and cryogenic cooling. The lobed geometry consists of two obtuse circular walls joined together with a common flat wall. Under internal pressure and cryogenic cooling, this type of lobed tank wall will experience open-mode (a process in which the honeycomb is stretched in the depth direction) and shear stress concentrations at the junctures where curved wall changes into flat wall (known as a curve-flat juncture). Open-mode and shear stress concentrations occur in the honeycomb core at the curve-flat junctures and could cause debonding failure. The levels of contributions from internal pressure and temperature loading to the open-mode and shear debonding failure are compared. The lobed fuel tank with honeycomb sandwich walls has been found to be a structurally unsound geometry because of very low debonding failure strengths. The debonding failure problem could be eliminated if the honeycomb core at the curve-flat juncture is replaced with a solid core.

  14. Dynamic response and optimal design of curved metallic sandwich panels under blast loading.

    Science.gov (United States)

    Qi, Chang; Yang, Shu; Yang, Li-Jun; Han, Shou-Hong; Lu, Zhen-Hua

    2014-01-01

    It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated using experimental data in the literature. The curved panel consisted of an aluminum alloy outer face and a rolled homogeneous armour (RHA) steel inner face in addition to a closed-cell aluminum foam core. The results showed that the configuration of a "soft" outer face and a "hard" inner face worked well for the curved sandwich panel against air blast loading in terms of maximum deflection (MaxD) and energy absorption. The panel curvature was found to have a monotonic effect on the specific energy absorption (SEA) and a nonmonotonic effect on the MaxD of the panel. Based on artificial neural network (ANN) metamodels, multiobjective optimization designs of the panel were carried out. The optimization results revealed the trade-off relationships between the blast-resistant and the lightweight objectives and showed the great use of Pareto front in such design circumstances.

  15. Dynamic Response and Optimal Design of Curved Metallic Sandwich Panels under Blast Loading

    Directory of Open Access Journals (Sweden)

    Chang Qi

    2014-01-01

    Full Text Available It is important to understand the effect of curvature on the blast response of curved structures so as to seek the optimal configurations of such structures with improved blast resistance. In this study, the dynamic response and protective performance of a type of curved metallic sandwich panel subjected to air blast loading were examined using LS-DYNA. The numerical methods were validated using experimental data in the literature. The curved panel consisted of an aluminum alloy outer face and a rolled homogeneous armour (RHA steel inner face in addition to a closed-cell aluminum foam core. The results showed that the configuration of a “soft” outer face and a “hard” inner face worked well for the curved sandwich panel against air blast loading in terms of maximum deflection (MaxD and energy absorption. The panel curvature was found to have a monotonic effect on the specific energy absorption (SEA and a nonmonotonic effect on the MaxD of the panel. Based on artificial neural network (ANN metamodels, multiobjective optimization designs of the panel were carried out. The optimization results revealed the trade-off relationships between the blast-resistant and the lightweight objectives and showed the great use of Pareto front in such design circumstances.

  16. Free Vibration of Sandwich Plates and Shells by Using Zig-Zag Function

    Directory of Open Access Journals (Sweden)

    S. Brischetto

    2009-01-01

    Full Text Available This paper analyses the free vibration response of sandwich curved and flat panels by introducing the zig-zag function (—1kζk (ZZF in the displacement models of classical and higher order two-dimensional shell theories. The main advantage of ZZF is the introduction of a discontinuity in the first derivative, zig-zag effect, of the displacements distribution with correspondence to the core/faces interfaces. Results including and discarding ZZF are compared. Several values of face-to-core stiffness ratio (FCSR and geometrical plate/shell parameters have been analyzed. Both fundamental vibration modes and those corresponding to high wave numbers are considered in the analysis. It is concluded that: (1 ZZF is highly recommended in the free vibration analysis of sandwich plates and shells; (2 the use of ZZF makes the error almost independent by FCSR parameter; (3 ZZF is easy to implement and its use should be preferred with respect to other `more cumbersome' refined theories.

  17. A Comparative Study on Damage Mechanism of Sandwich Structures with Different Core Materials under Lightning Strikes

    Directory of Open Access Journals (Sweden)

    Jiangyan Yan

    2017-10-01

    Full Text Available Wind turbine blades are easily struck by lightning, a phenomenon that has attracted more and more attention in recent years. On this subject a large current experiment was conducted on three typical blade sandwich structures to simulate the natural lightning-induced arc effects. The resulting damage to different composite materials has been compared: polyvinyl chloride (PVC and polyethylene terephthalate (PET suffered pyrolysis and cracks inside, while the damage to balsa wood was fibers breaking off and large delamination between it and the resin layer, and only a little chemical pyrolysis. To analyze the damage mechanism on sandwich structures of different materials, a finite element method (FEM model to calculate the temperature and pressure distribution was built, taking into consideration heat transfer and flow expansion due to impulse currents. According to the simulation results, PVC had the most severe temperature and pressure distribution, while PET and balsa wood were in the better condition after the experiments. The temperature distribution results explained clearly why balsa wood suffered much less chemical pyrolysis than PVC. Since balsa wood had better thermal stability than PET, the pyrolysis area of PET was obviously larger than that of balsa wood too. Increasing the volume fraction of solid components of porous materials can efficiently decrease the heat transfer velocity in porous materials. Permeability didn’t influence that much. The findings provide support for optimum material selection and design in blade manufacturing.

  18. Experimental and analytical study about the compressive behavior of eps sandwich panels

    Directory of Open Access Journals (Sweden)

    Carbonari, G.

    2013-09-01

    Full Text Available This study presents a detailed characterization of the behavior of EPS sandwich panels subject to normal load taking into account several variables. For that, two experimental programs were performed, leading to the proposal of an analytical formulation to estimate the maximum load resisted. The results obtained show how the height of the panel, the material properties, the position and configuration of the reinforcement may affect the resistance of panels. Special attention should be given to the eccentric position of the reinforcement, which may reduce considerably the maximum load resisted. Some recommendations about the optimum placement of the reinforcement are proposed.El presente estudio se centra en la caracterización del comportamiento de paneles tipo Sandwich con hormigón y EPS sometidos a cargas normales de compresión y teniendo en cuenta diferentes variables. Para ello, se han realizado campañas experimentales, cuyos resultados muestran que los aspectos geométricos, las propiedades de los materiales, la posición y la configuración del refuerzo influyen de manera significativa en la resistencia de los paneles. Asimismo se propone una formulación analítica para estimar la máxima carga resistida por los mismos. El estudio muestra que es especialmente importante definir la posición de las armaduras en la sección transversal ya que la excentricidad de las mismas reduce la resistencia a compresión de los paneles.

  19. Identification of honeycomb sandwich properties by high-resolution modal analysis

    Directory of Open Access Journals (Sweden)

    Rebillat M.

    2010-06-01

    Full Text Available A method is proposed to identify the mechanical properties of the skin and core materials of honeycomb sandwich. All the elastic coefficients and loss-factors that matter in the dynamics of a panel in the thick-plate approximation are identified. To this end, experimental natural modes (i.e. eigenmodes of the damped system are compared to the numerical modes of a large sandwich panel (lx,y/h ≃ 80. The chosen generic model for the visco-elastic behaviour of the materials is E (1 + jη. The numerical modes are computed by means of a Rayleigh-Ritz procedure and their dampings are predicted according to the visco-elastic model. The frequencies and dampings of the natural modes of the panel are estimated experimentally by means of a high-resolution modal analysis technique. An optimisation procedure yields the desired coefficients. A sensitivity analysis assess the reliability of the method.

  20. A Comparative Study of Ballistic Resistance of Sandwich Panels with Aluminum Foam and Auxetic Honeycomb Cores

    Directory of Open Access Journals (Sweden)

    Shu Yang

    2013-01-01

    Full Text Available An innovative auxetic-cored sandwich panel (AXP is proposed. Its perforation resistant performance under high-velocity projectile impact was numerically analyzed using the validated finite element simulation techniques and compared with that of the aluminum foam-cored sandwich panel (AFP of identical dimensions and weight. It has been found that the AXP is far superior to the AFP in ballistic resistance because of the material concentration at the impacted area due to the negative Poisson's ratio (NPR effect. A parametric study was carried out to investigate the effects of several key parameters, including impact velocity, face and core thicknesses, and core density, on the ballistic resistance of the AXP and AFP. The results show that the ballistic limit and perforation energy of the AXP is greatly affected by these parameters. Meanwhile, the advantages of AXP over AFP being used as ballistic resistant structures are highlighted. The primary outcome of this research is new information on the development and design of advanced ballistic resistant structures containing auxetic materials.

  1. Harmonic Differential Quadrature Analysis of Soft-Core Sandwich Panels under Locally Distributed Loads

    Directory of Open Access Journals (Sweden)

    Xinwei Wang

    2016-11-01

    Full Text Available Sandwich structures are widely used in practice and thus various engineering theories adopting simplifying assumptions are available. However, most engineering theories of beams, plates and shells cannot recover all stresses accurately through their constitutive equations. Therefore, the soft-core is directly modeled by two-dimensional (2D elasticity theory without any pre-assumption on the displacement field. The top and bottom faces act like the elastic supports on the top and bottom edges of the core. The differential equations of the 2D core are then solved by the harmonic differential quadrature method (HDQM. To circumvent the difficulties in dealing with the locally distributed load by point discrete methods such as the HDQM, a general and rigorous way is proposed to treat the locally distributed load. Detailed formulations are provided. The static behavior of sandwich panels under different locally distributed loads is investigated. For verification, results are compared with data obtained by ABAQUS with very fine meshes. A high degree of accuracy on both displacement and stress has been observed.

  2. A novel SERRS sandwich-hybridization assay to detect specific DNA target.

    Directory of Open Access Journals (Sweden)

    Cécile Feuillie

    Full Text Available In this study, we have applied Surface Enhanced Resonance Raman Scattering (SERRS technology to the specific detection of DNA. We present an innovative SERRS sandwich-hybridization assay that allows specific DNA detection without any enzymatic amplification, such as is the case with Polymerase Chain Reaction (PCR. In some substrates, such as ancient or processed remains, enzymatic amplification fails due to DNA alteration (degradation, chemical modification or to the presence of inhibitors. Consequently, the development of a non-enzymatic method, allowing specific DNA detection, could avoid long, expensive and inconclusive amplification trials. Here, we report the proof of concept of a SERRS sandwich-hybridization assay that leads to the detection of a specific chamois DNA. This SERRS assay reveals its potential as a non-enzymatic alternative technology to DNA amplification methods (particularly the PCR method with several applications for species detection. As the amount and type of damage highly depend on the preservation conditions, the present SERRS assay would enlarge the range of samples suitable for DNA analysis and ultimately would provide exciting new opportunities for the investigation of ancient DNA in the fields of evolutionary biology and molecular ecology, and of altered DNA in food frauds detection and forensics.

  3. Development of a monoclonal sandwich ELISA for direct detection of bluetongue virus 8 in infected animals.

    Science.gov (United States)

    Ten Haaf, Andre; Kohl, Johannes; Pscherer, Sibylle; Hamann, Hans-Peter; Eskens, Hans Ulrich; Bastian, Max; Gattenlöhner, Stefan; Tur, Mehmet Kemal

    2017-05-01

    Bluetongue is an infectious viral disease which can cause mortality in affected ruminants, and tremendous economic damage via impacts upon fertility, milk production and the quality of wool. The disease is caused by bluetongue virus (BTV) which is transmitted by species of Culicoides biting midge. Rapid detection of BTV is required to contain disease outbreaks and reduce economic losses. The purpose of this study was to develop a monoclonal sandwich ELISA for direct detection of BTV in infected animals. Phage display technology was used to isolate BTV specific antibody fragments by applying the human scFv Tomlinson antibody libraries directly on purified BTV-8 particles. Three unique BTV-8 specific human antibody fragments were isolated which were able to detect purified BTV particles and also BTV in serum of an infected sheep. A combination of a human/mouse scFv-Fc chimeric fusion protein and a human Fab fragment in a sandwich ELISA format was able to detect BTV specifically with a limit of detection (LOD) of 10(4) infectious virus particles, as determined by tissue culture titration. This approach provided pilot data towards the development of a novel diagnostic test that might be used for direct detection of BTV-8 particles. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Fabrication of mucoadhesive chitosan coated polyvinylpyrrolidone/cyclodextrin/clotrimazole sandwich patches for oral candidiasis.

    Science.gov (United States)

    Tonglairoum, Prasopchai; Ngawhirunpat, Tanasait; Rojanarata, Theerasak; Panomsuk, Suwanee; Kaomongkolgit, Ruchadaporn; Opanasopit, Praneet

    2015-11-05

    This study aims to fabricate clotrimazole (CZ)-composite sandwich nanofibers using electrospinning. The CZ-loaded polyvinylpyrrolidone (PVP)/hydroxypropyl-β-cyclodextrin (HPβCD) fiber was coated with chitosan-cysteine (CS-SH)/polyvinyl alcohol (PVA) to increase the mucoadhesive properties and to achieve a sustained release of the drug from the nanofibers. The nanofibers were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray diffractometry (XRD). The nanofibers mechanical and mucoadhesive properties, drug release, antifungal activity and cytotoxicity were also assessed. The fibers were in the nanoscale with good mucoadhesive properties. The XRPD revealed a molecular dispersion of amorphous CZ in the nanofibers. The initial fast release of CZ from the nanofibers was achieved. Moreover, the sandwich nanofibers coated for longer times resulted in slower release rates compared with the shorter coating times. The CZ-loaded nanofibers killed the Candida significantly faster than the commercial CZ lozenges at 5, 15 and 30 min and were safe for a 2-h incubation. Therefore, these nanofibers may be promising candidates for the treatment of oral candidiasis. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Additive-manufactured sandwich lattice structures: A numerical and experimental investigation

    Science.gov (United States)

    Fergani, Omar; Tronvoll, Sigmund; Brøtan, Vegard; Welo, Torgeir; Sørby, Knut

    2017-10-01

    The utilization of additive-manufactured lattice structures in engineered products is becoming more and more common as the competitiveness of AM as a production technology has increased during the past several years. Lattice structures may enable important weight reductions as well as open opportunities to build products with customized functional properties, thanks to the flexibility of AM for producing complex geometrical configurations. One of the most critical aspects related to taking AM into new application areas—such as safety critical products—is currently the limited understanding of the mechanical behavior of sandwich-based lattice structure mechanical under static and dynamic loading. In this study, we evaluate manufacturability of lattice structures and the impact of AM processing parameters on the structural behavior of this type of sandwich structures. For this purpose, we conducted static compression testing for a variety of geometry and manufacturing parameters. Further, the study discusses a numerical model capable of predicting the behavior of different lattice structure. A reasonably good correlation between the experimental and numerical results was observed.

  6. A new technology for sandwich plates and structures based on the use of in-situ foamable thermoplastic films

    Science.gov (United States)

    Beukers, Adriaan

    The cost effectiveness of structures in transports is basically depending on the operational capability and availability, the so called structure effectiveness, per unit cost. These costs are mainly determined by the cost to manufacture (acquisition costs) and the costs to operate (mass) and to maintain (damage sensitivity). In this paper the attention is focused on a new approach leading to efficiency improving sandwich material concepts, structures and related manufacturing processes, satisfying the value for money criterion as formulated by the cost effectiveness criterion. The sandwich materials and technology applied are based on the use of thermoformable continuous fiber reinforced thermoplastic polymers, in particular E-glass reinforced polyetherimide (PEI).

  7. Group IV Mixed Sandwich Compounds: Synthesis of Pentamethylcyclopentadienyl-Titanium, -Zirconium and -Hafnium Cycloheptatrienyl and Cyclooctatetraene Complexes

    OpenAIRE

    BLENKERS, J; Bruin, P. de; Teuben, J.H.

    1985-01-01

    The first complete series of Group IV sandwich complexes Cp*MCHT (M = Ti, Zr, Hf) (Cp* = η5-C5Me5, CHT = η7-C7H7) has been made and characterized. Cp*HfCHT is the first reported sandwich compound of hafnium. The d1, η8-C8H8(COT) complex Cp*MCOT were also synthesised similarly for M = Ti, Zr, but the complexes with M = Hf was not obtained; the failure to obtain Cp*HfCOT is ascribed to kinetic factors. Cp*ZrCOT is the first thermally-stable paramagnetic organozirconium(III) compound isolated in...

  8. Preparing Sandwiches. Learning Activity Pack and Instructor's Guide 5.4b. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with preparing sandwiches to order and in quantity. Illustrated information sheets and learning activities are provided in these areas: preparing sandwiches to…

  9. Optical to ultraviolet spectra of sandwiches of benzene and transition metal atoms: Time dependent density functional theory and many-body calculations

    DEFF Research Database (Denmark)

    Martinez, Jose Ignacio; García Lastra, Juan Maria; Lopez, M. J.

    2010-01-01

    The optical spectra of sandwich clusters formed by transition metal atoms (titanium, vanadium, and chromium) intercalated between parallel benzene molecules have been studied by time-dependent density functional theory (TDDFT) and many-body perturbation theory. Sandwiches with different number...

  10. Multi-objective optimization of a functionally graded sandwich panel under mechanical loading in the presence of stress constraint

    Science.gov (United States)

    Ashjari, Mohammad; Khoshravan, Mohammad Reza

    2017-12-01

    A method was presented for multi-objective optimization of material distribution of simply supported functionally graded (FG) sandwich panel, and sensitivity analyses of optimal designs were also conducted based on design variables and objective functions. The material composition was assumed to vary only in the thickness direction. Piecewise cubic interpolation of volume fractions was used to calculate volume fractions of constituent material phases at a point; these fractions were defined at a limited number of evenly spaced control points. The effective material properties of the panel were obtained by applying the linear rule of mixtures. The behavior of FG sandwich panel was predicted by Reddy's assumptions of third-order shear deformation theory. Exact solutions for deflections and stresses of simply supported sandwich panel were presented using the Navier-type solution technique. The volume fractions at control points, material, and thickness of the faces which were selected as decision variables were optimized by a multi-objective evolutionary algorithm known as the fast and elitist multi-objective genetic algorithm (NSGA-II). The mass and deflection of the model were considered the objective functions to be minimized with stress constraints. This model was optimized to verify the capability and efficiency of the proposed model under mechanical loading. The framework proposed for designing FG sandwich panel under pure mechanical conditions was furnished by the results.

  11. Experimental, Theoretical and Numerical Investigation of the Flexural Behaviour of the Composite Sandwich Panels with PVC Foam Core

    Science.gov (United States)

    Mostafa, A.; Shankar, K.; Morozov, E. V.

    2014-08-01

    This study presents the main results of an experimental, theoretical and numerical investigation on the flexural behaviour and failure mode of composite sandwich panels primarily developed for marine applications. The face sheets of the sandwich panels are made up of glass fibre reinforced polymer (GFRP), while polyvinylchloride (PVC) foam was used as core material. Four-point bending test was carried out to investigate the flexural behaviour of the sandwich panel under quasi static load. The finite element (FE) analysis taking into account the cohesive nature of the skin-core interaction as well as the geometry and materials nonlinearity was performed, while a classical beam theory was used to estimate the flexural response. Although the FE results accurately represented the initial and post yield flexural response, the theoretical one restricted to the initial response of the sandwich panel due to the linearity assumptions. Core shear failure associate with skin-core debonding close to the loading points was the dominant failure mode observed experimentally and validated numerically and theoretically.

  12. Differentiation of Foot-and-Mouth Disease-Infected pigs from Vaccinated Pigs Using Antibody-Detecting Sandwich ELISA

    NARCIS (Netherlands)

    Chen, T.H.; Lee, F.; Lin, Y.L.; Dekker, A.; Chung, W.B.; Pan, C.H.; Jong, M.H.; Huang, C.C.; Lee, M.C.; Tsai, H.J.

    2011-01-01

    The presence of serum antibodies for nonstructural proteins of the foot-and-mouth disease virus (FMDV) can differentiate FMDV-infected animals from vaccinated animals. In this study, a sandwich ELISA was developed for rapid detection of the foot-and-mouth disease (FMD) antibodies; it was based on an

  13. Determination of Peroxide Value of Edible Oils Used in Confectionary, Restaurants and Sandwich Shops in Gorgan in 2011

    Directory of Open Access Journals (Sweden)

    H RahimzadehBarzoki

    2014-05-01

    Conclusion: The findings show that Peroxide value in sandwich and fast food shops, restaurants, and confectionary shop are higher than the standard, so its seems that having educational plan for staff about nutrition and the correct methods of frying food is necessary.

  14. Strong control and squeezing effects of radiation states in a slab waveguide sandwiched between two omnidirectional mirrors

    NARCIS (Netherlands)

    van Driel, H.M.; Hoekstra, Hugo; Stoffer, Remco; Yudistira, D.

    The effect of sandwiching a slab waveguide in air between two omnidirectional mirrors on the local density of modes is investigated theoretically. Design aspects of such a structure are considered, and it is shown that the local density of modes other than the slab-guided mode can be strongly

  15. Stability of the face layer of sandwich beams with sub-interface damage in the foam core

    NARCIS (Netherlands)

    Koysin, V.; Skvortsov, Vitaly; Shipsha, Andrey

    2007-01-01

    This paper addresses the effect of local indentation/impact damage on the bearing capacity of foam core sandwich beams subjected to edgewise compression. The considered damage is in a form of through-width zone of crushed core accompanied by a residual dent in the face sheet. It is shown that such

  16. Relation between Streaming Potential and Streaming Electrification Generated by Streaming of Water through a Sandwich-type Cell

    OpenAIRE

    Maruyama, Kazunori; Nikaido, Mitsuru; Hara, Yoshinori; Tanizaki, Yoshie

    2012-01-01

    Both streaming potential and accumulated charge of water flowed out were measured simultaneously using a sandwich-type cell. The voltages generated in divided sections along flow direction satisfied additivity. The sign of streaming potential agreed with that of streaming electrification. The relation between streaming potential and streaming electrification was explained from a viewpoint of electrical double layer in glass-water interface.

  17. Improvement of the in-plane crushing response of CFRP sandwich panels by through-thickness reinforcements

    NARCIS (Netherlands)

    Blok, L.G.; Kratz, J.; Lukaszewicz, D.; Hesse, S; Ward, C.; Kassapoglou, C.

    2016-01-01

    Fibre reinforced plastic (FRP) composite materials can provide superior specific energy absorption performance over conventional metallic structures if crush stability can be maintained during the impact event. The core in sandwich structures helps to stabilise the crush front by preventing global

  18. The Journey of a Sandwich: Computer-Based Laboratory Experiments about the Human Digestive System in High School Biology Teaching

    Science.gov (United States)

    Sorgo, Andrej; Hajdinjak, Zdravka; Briski, Darko

    2008-01-01

    Teaching high school students about the digestive system can be a challenge for a teacher when s/he wants to overcome rote learning of facts without a deeper understanding of the physiological processes inside the alimentary tract. A series of model experiments illustrating the journey of a sandwich was introduced into teaching high school…

  19. A system of steel-elastomer sandwich plates for strengthening orthotropic bridge decks

    Science.gov (United States)

    Feldmann, M.; Sedlacek, G.; Geßler, A.

    2007-03-01

    The use of a sandwich plate system (SPS) composed of two steel plates with a solid polymer (polyurethane) core has been introduced as a refurbishment procedure for steel decks of bridges, the so-called orthotropic decks consisting of a deckplate with longitudinal stiffeners and transverse crossbeams. Unfortunately, a great many of existing steel bridges still have structural members that do not comply with the recommendations given in design codes, and therefore damages have developed in them. For a satisfactory refurbishment of the bridges, the SPS technique fulfils all necessary requirements. To this end, both experimental and calculative investigations were carried out at RWTH Aachen to demonstrate the reinforcing and stiffening effect and to prove the suitability of the SPS-overlay technique for general use. The practical applicability of a SPS has been tested successfully in a pilot project for a German motorway bridge under severe traffic.

  20. Sizing Single Cantilever Beam Specimens for Characterizing Facesheet/Core Peel Debonding in Sandwich Structure

    Science.gov (United States)

    Ratcliffe, James G.

    2010-01-01

    This paper details part of an effort focused on the development of a standardized facesheet/core peel debonding test procedure. The purpose of the test is to characterize facesheet/core peel in sandwich structure, accomplished through the measurement of the critical strain energy release rate associated with the debonding process. The specific test method selected for the standardized test procedure utilizes a single cantilever beam (SCB) specimen configuration. The objective of the current work is to develop a method for establishing SCB specimen dimensions. This is achieved by imposing specific limitations on specimen dimensions, with the objectives of promoting a linear elastic specimen response, and simplifying the data reduction method required for computing the critical strain energy release rate associated with debonding. The sizing method is also designed to be suitable for incorporation into a standardized test protocol. Preliminary application of the resulting sizing method yields practical specimen dimensions.