WorldWideScience

Sample records for sandstone project

  1. National Assessment of Oil and Gas Project - Uinta-Piceance Province (020) Depth to the top of the Dakota Sandstone

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset shows depth ranges to the top of the Dakota Sandstone within the Uinta-Piceance Province, northwestern Colorado and northeastern Utah.

  2. Sandstone Turning by Abrasive Waterjet

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Petr; Cárach, J.; Hloch, Sergej; Vasilko, K.; Klichová, Dagmar; Klich, Jiří; Lehocká, D.

    2015-01-01

    Roč. 48, č. 6 (2015), s. 2489-2493 ISSN 0723-2632 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet Subject RIV: JQ - Machines ; Tools Impact factor: 2.386, year: 2015 http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

  3. Economic evaluation on tight sandstone gas development projects in China and recommendation on fiscal and taxation support policies

    Directory of Open Access Journals (Sweden)

    Zhen Yang

    2016-11-01

    Full Text Available China is rich in tight sandstone gas resources (“tight gas” for short. For example, the Sulige Gasfield in the Ordos Basin and the Upper Triassic Xujiahe Fm gas reservoir in the Sichuan Basin are typical tight gas reservoirs. In the past decade, tight gas reserve and production both have increased rapidly in China, but tight gas reservoirs are always managed as conventional gas reservoirs without effective fiscal, taxation and policy supports. The potential of sustainable tight gas production increase is obviously restricted. The tight gas development projects represented by the Sulige Gasfield have failed to make profit for a long period, and especially tight gas production has presented a slight decline since 2015. In this paper, a new economic evaluation method was proposed for tight gas development projects. The new method was designed to verify the key parameters (e.g. production decline rate and single-well economic service life depending on tight gas development and production characteristics, and perform the depreciation by using the production method. Furthermore, the possibility that the operation cost may rise due to pressure-boosting production and intermittent opening of gas wells is considered. The method was used for the tight gas development project of Sulige Gasfield, showing that its profit level is much lower than the enterprise's cost level of capital. In order to support a sustainable development of tight gas industry in China, it is recommended that relevant authorities issue value-added tax (VAT refund policy as soon as possible. It is necessary to restore the non-resident gas gate price of the provinces where tight gas is produced to the fair and reasonable level in addition to the fiscal subsidy of CNY0.24/m3, or offer the fiscal subsidy of CNY0.32/m3 directly based on the on-going gate price. With these support policies, tax income is expected to rise directly, fiscal expenditure will not increase, and gas

  4. USGS National and Global Oil and Gas Assessment Project-Permian Basin Province, Val Verde Basin, Canyon Sandstones Assessment Units

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is...

  5. Possible continuous-type (unconventional) gas accumulation in the Lower Silurian "Clinton" sands, Medina Group and Tuscarora Sandstone in the Appalachian Basin; a progress report of the 1995 project activities

    Science.gov (United States)

    Ryder, Robert T.; Aggen, Kerry L.; Hettinger, Robert D.; Law, Ben E.; Miller, John J.; Nuccio, Vito F.; Perry, William J.; Prensky, Stephen E.; Filipo, John J.; Wandrey, Craig J.

    1996-01-01

    INTRODUCTION: In the U.S. Geological Survey's (USGS) 1995 National Assessment of United States oil and gas resources (Gautier and others, 1995), the Appalachian basin was estimated to have, at a mean value, about 61 trillion cubic feet (TCF) of recoverable gas in sandstone and shale reservoirs of Paleozoic age. Approximately one-half of this gas resource is estimated to reside in a regionally extensive, continuous-type gas accumulation whose reservoirs consist of low-permeability sandstone of the Lower Silurian 'Clinton' sands and Medina Group (Gautier and others, 1995; Ryder, 1995). Recognizing the importance of this large regional gas accumulation for future energy considerations, the USGS initiated in January 1995 a multi-year study to evaluate the nature, distribution, and origin of natural gas in the 'Clinton' sands, Medina Group sandstones, and equivalent Tuscarora Sandstone. The project is part of a larger natural gas project, Continuous Gas Accumulations in Sandstones and Carbonates, coordinated in FY1995 by Ben E. Law and Jennie L. Ridgley, USGS, Denver. Approximately 2.6 man years were devoted to the Clinton/Medina project in FY1995. A continuous-type gas accumulation, referred to in the project, is a new term introduced by Schmoker (1995a) to identify those natural gas accumulations whose reservoirs are charged throughout with gas over a large area and whose entrapment does not involve a downdip gas-water contact. Gas in these accumulations is located downdip of the water column and, thus, is the reverse of conventional-type hydrocarbon accumulations. Commonly used industry terms that are more or less synonymous with continuous-type gas accumulations include basin- centered gas accumulation (Rose and others, 1984; Law and Spencer, 1993), tight (low-permeability) gas reservoir (Spencer, 1989; Law and others, 1989; Perry, 1994), and deep basin gas (Masters, 1979, 1984). The realization that undiscovered gas in Lower Silurian sandstone reservoirs of the

  6. USGS National and Global Oil and Gas Assessment Project-Permian Basin Province, Val Verde Basin, Canyon Sandstones Assessment Units

    Science.gov (United States)

    Schenk, Christopher J.

    2016-01-01

    The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown herein as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary.

  7. Kaolinite Mobilisation in Sandstone

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Fabricius, Ida Lykke; Kets, Frans

    2013-01-01

    The effect of temperature and salinity on sandstone permeability is critical to the feasibility of heat storage in geothermal aquifers. Permeability reduction has been observed in Berea sandstone when the salinity of the pore water is reduced as well as when the sample is heated. Several authors...... suggest that this effect is due to kaolinite clay mobilisation from the quartz grain surface; the mobilised particles subsequently plug the pore throats and reduce the permeability irreversibly. The expected hysteresis is observed when the salinity is reduced and increased; however, in contradiction...... with the throat plugging theory, the effect of heating is found to be reversible with cooling. In laboratory experiments we heated Berea sandstone from 20oC to 80oC and observed a reversible permeability reduction. The permeability of the heated samples increased at higher flow rates. We propose that in this case...

  8. "Sydney sandstone": Heritage Stone from Australia

    Science.gov (United States)

    Cooper, Barry; Kramar, Sabina

    2014-05-01

    as well as block. Recent international projects by Gosford Quarries include Mishima Golf Club in Japan, Al Awadi Tower in Kuwait, New World Resort in China and a Hard Rock Café in Florida, USA. Arguably Sydney sandstone is Australia's most prominent potential Global Heritage Stone Resource and details are readily available in existing publications to make the nomination.

  9. Greybull Sandstone Petroleum Potential on the Crow Indian Reservation, South-Central Montana

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, David A.

    2002-05-13

    The focus of this project was to explore for stratigraphic traps that may be present in valley-fill sandstone at the top of the Lower Cretaceous Kootenai Formation. This sandstone interval, generally known as the Greybull Sandstone, has been identified along the western edge of the reservation and is a known oil and gas reservoir in the surrounding region. The Greybull Sandstone was chosen as the focus of this research because it is an excellent, well-documented, productive reservoir in adjacent areas, such as Elk Basin; Mosser Dome field, a few miles northwest of the reservation; and several other oil and gas fields in the northern portion of the Bighorn Basin.

  10. Black Weathering of Bentheim and Obernkirchen Sandstone

    NARCIS (Netherlands)

    Nijland, T.G.; Dubelaar, C.W.; Van Hees, R.P.J.; Linden, T.J.M.

    2003-01-01

    Black weathering of sandstone in monuments is widespread. Some objects owe their name to it, like the Porta Nigra in Trier (Germany). Other than the black gypsum crusts common on limestone, the black weathering layer on sandstone is rather thin and well adherent. Formation of such layers on Bentheim

  11. PALEOEVIRONMENT OF NIGERIA'S AJALI SANDSTONES: A ...

    African Journals Online (AJOL)

    The Ajali Sandstone is a major clastic formation of Campanian-Maastrichtian age occuring within the Anambra Basin, Southeastern Nigeria. The Sandstones have a high incidence of quartz and feldspar pebbles. Clasts of vein quartz pebbles were selected for morphometric study of decipher the depositional environment of ...

  12. Experimental strain analysis of Clarens Sandstone colonised by endolithic lichens

    Directory of Open Access Journals (Sweden)

    D. Wessels

    1995-09-01

    Full Text Available Endolithic lichens occur commonly on Clarens Sandstone in South Africa, where they significantly contribute to the weathering of sandstone by means of mechanical and chemical weathering processes. This preliminary investigation reports on the success- ful use of strain gauges in detecting strain differences between sandstone without epilithic lichens and sandstone colonised by the euendolithic lichen Lecidea aff. sarcogynoides Korb. Mechanical weathering, expressed as strain changes, in Clarens Sandstone was studied during the transition from relatively dry winter to wet summer conditions. Daily weathering of sandstone due to thermal expansion and contraction of colonised and uncolonised sandstone could be shown. Our results show that liquid water in sandstone enhances the mechanical weathering of uncolonised Clarens Sandstone while water in the gaseous phase enhances mechanical weathering of sandstone by euendolithic lichens.

  13. Effects of Thermal Treatment on the Dynamic Mechanical Properties of Coal Measures Sandstone

    Science.gov (United States)

    Li, Ming; Mao, Xianbiao; Cao, Lili; Pu, Hai; Mao, Rongrong; Lu, Aihong

    2016-09-01

    Many projects such as the underground gasification of coal seams and coal-bed methane mining (exploitation) widely involve the dynamic problems of coal measures sandstone achieved via thermal treatment. This study examines the dynamic mechanical properties of coal measures sandstone after thermal treatment by means of an MTS653 high-temperature furnace and Split Hopkinson pressure bar test system. Experimental results indicate that 500 °C is a transition point for the dynamic mechanical parameters of coal measures sandstone. The dynamic elastic modulus and peak strength increase linearly from 25 to 500 °C while the dynamic peak strain decreases linearly over the same temperature range. The dynamic elastic modulus and peak strength drop quickly from 500 to 800 °C, with a significant increase in the dynamic peak strain over the same temperature range. The rock mechanics are closely linked to material composition and mesoscopic structure. Analysis by X-ray diffraction and scanning electron microscopy indicate that the molecules inside the sandstone increase in density due to the thermal expansion of the material particles, which effectively improves the deformation resistance and carrying capacity of the sandstone and reduces the likelihood of axial deformation. With heat treatment that exceeds 500 °C, the dynamic mechanical properties rapidly weaken due to the decomposition of kaolinite; additionally, hot cracking of the mineral particles within the materials arises from coal sandstone internal porosity, and other defects gradually appear.

  14. Reservoir characterization of Pennsylvanian sandstone reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1995-02-01

    This final report summarizes the progress during the three years of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description; (ii) scale-up procedures; (iii) outcrop investigation. The first section describes the methods by which a reservoir can be described in three dimensions. The next step in reservoir description is to scale up reservoir properties for flow simulation. The second section addresses the issue of scale-up of reservoir properties once the spatial descriptions of properties are created. The last section describes the investigation of an outcrop.

  15. GREYBULL SANDSTONE PETROLEUM POTENTIAL ON THE CROW INDIAN RESERVATION, SOUTH-CENTRAL MONTANA

    Energy Technology Data Exchange (ETDEWEB)

    David A. Lopez

    2000-12-14

    Evaluation of the Lower Cretaceous Greybull Sandstone on the Crow Indian Reservation for potential stratigraphic traps in the valley-fill sandstone was the focus of this project. The Crow Reservation area, located in south-central Montana, is part of the Rocky Mountain Foreland structural province, which is characterized by Laramide uplifts and intervening structural basins. The Pryor and Bighorn mountains, like other foreland uplifts, are characterized by asymmetrical folds associated with basement-involved reverse faults. The reservation area east of the mountains is on the northwestern flank of the Powder River Basin. Therefore, regional dips are eastward and southeastward; however, several prominent structural features interrupt these regional dips. The nearly 4,000 mi{sup 2} reservation is under explored but has strong potential for increased oil and gas development. Oil and gas production is well established in the Powder River Basin of Wyoming to the south as well as in the areas north and west of the reservation. However, only limited petroleum production has been established within the reservation. Geologic relations and trends indicate strong potential for oil and gas accumulations, but drilling has been insufficient for their discovery. The Greybull Sandstone, which is part of the transgressive systems tract that includes the overlying Fall River Sandstone, was deposited on a major regional unconformity. The erosional surface at the base of the Greybull Sandstone is the +100 Ma, late Aptian-Early Albian regional unconformity of Weimer (1984). This lowstand erosional surface was controlled by a basin-wide drop in sea level. In areas where incised Greybull channels are absent, the lowstand erosional unconformity is at the base of the Fall River Sandstone and equivalent formations. During the pre-Greybull lowstand, sediment bypassed this region. In the subsequent marine transgression, streams began to aggrade and deposit sand of the lower Greybull Sandstone

  16. Quantitative study of a rapidly weathering overhang developed in an artificially wetted sandstone cliff

    Czech Academy of Sciences Publication Activity Database

    Bruthans, J.; Filippi, Michal; Schweigstillová, Jana; Řihošek, J.

    2017-01-01

    Roč. 42, č. 5 (2017), s. 711-723 ISSN 0197-9337 R&D Projects: GA ČR GA13-28040S Institutional support: RVO:67985831 ; RVO:67985891 Keywords : sandstone overhang * retreat * frost weathering * erosion rate * stress Subject RIV: DB - Geology ; Mineralogy Impact factor: 3.697, year: 2016

  17. Clay squirt: Local flow dispersion in shale-bearing sandstones

    DEFF Research Database (Denmark)

    Sørensen, Morten Kanne; Fabricius, Ida Lykke

    2017-01-01

    Dispersion of elastic-wave velocity is common in sandstone and larger in shaly sandstone than in clean sandstone. Dispersion in fluid-saturated shaly sandstone often exceeds the level expected from the stress-dependent elastic moduli of dry sandstone. The large dispersion has been coined clay...... squirt and is proposed to originate from a pressure gradient between the clay microporosity and the effective porosity. We have formulated a simple model that quantifies the clay-squirt effect on bulk moduli of sandstone with homogeneously distributed shale laminae or dispersed shale. The model...... predictions were compared with the literature data. For sandstones with dispersed shale, agreement was found, whereas other sandstones have larger fluid-saturated bulk modulus, possibly due to partially load-bearing shales or heterogeneous shale distribution. The data that agree with the clay-squirt model...

  18. Geochemical characteristics of sandstones from Cretaceous ...

    Indian Academy of Sciences (India)

    The Trichinopoly Group (later redesignated as Garudamangalam) has unconformable relationship with underlying Uttatur Group and is divided into lower Kulakanattam Formation and upper Anaipadi Formation. These calcareous sandstones are analysed major, trace and rare earth elements (REEs) to find out CIA, CIW, ...

  19. petrography and depositional environments of the sandstones in ...

    African Journals Online (AJOL)

    presence of quartz overgrowths in some of the sandstones. This study has shown that the sandstones in the area are deposited by fluvial dominated processes, with the interaction of beach processes, though to a lesser degree. KEYWORDS: textural analysis, sandstone petrography, depositional setting. INTRODUCTION.

  20. Performance of Different Acids on Sandstone Formations

    Directory of Open Access Journals (Sweden)

    M. A. Zaman

    2013-12-01

    Full Text Available Stimulation of sandstone formations is a challenging task, which involves several chemicals and physical interactions of the acid with the formation. Some of these reactions may result in formation damage. Mud acid has been successfully used to stimulate sandstone reservoirs for a number of years. It is a mixture of hydrofluoric (HF and hydrochloric (HCl acids designed to dissolve clays and siliceous fines accumulated in the near-wellbore region. Matrix acidizing may also be used to increase formation permeability in undamaged wells. The change may be up to 50% to 100% with the mud acid. For any acidizing process, the selection of acid (Formulation and Concentration and the design (Pre-flush, Main Acid, After-flush is very important. Different researchers are using different combinations of acids with different concentrations to get the best results for acidization. Mainly the common practice is combination of Hydrochloric Acid – Hydrofluoric with Concentration (3% HF – 12% HCl. This paper presents the results of a laboratory investigation of Orthophosphoric acid instead of hydrochloric acid in one combination and the second combination is Fluoboric and formic acid and the third one is formic and hydrofluoric acid. The results are compared with the mud acid and the results calculated are porosity, permeability, and FESEM Analysis and Strength tests. All of these new combinations shows that these have the potential to be used as acidizing acids on sandstone formations.

  1. Effect of temperature on sandstone permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Kjøller, Claus

    with the Kozeny equation and the Klinkenberg procedure. Both methods overestimated the measured brine permeability; this suggests that additional factors, possibly related to clay morphology, contributed to a lower brine permeability. Thermal expansion would have a negligible effect on permeability as estimated...... interaction forces. Quantitative analysis of images, in which mineralogy was mapped based on backscatter electron intensity in combination with energy dispersive X-ray analysis by using the QEMSCAN® system, was used to compare a tested sample to an untested Berea sandstone sample. During the experiment...

  2. Biologically-initiated rock crust on sandstone: Mechanical and hydraulic properties and resistance to erosion

    Czech Academy of Sciences Publication Activity Database

    Slavík, M.; Bruthans, J.; Filippi, Michal; Schweigstillová, Jana; Falteisek, L.; Řihošek, J.

    2017-01-01

    Roč. 278, FEB 1 (2017), s. 298-313 ISSN 0169-555X R&D Projects: GA ČR GA13-28040S; GA ČR(CZ) GA16-19459S Institutional support: RVO:67985831 ; RVO:67985891 Keywords : biofilm * biocrust * biologically-initiated rock crust * sandstone protection * case hardening Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.958, year: 2016

  3. Nodular features from Proterozoic Sonia Sandstone, Jodhpur Group ...

    Indian Academy of Sciences (India)

    From granulometric and microscopic (optical and scanning electron) studies carried out on sandstones from the nodules and their host sandstones, geochemical analysis (SEM-EDAX) of intragranular cement present within Type I nodules, and appreciation of control of associated fracture system within Type II nodules, it is ...

  4. Petrography and depositional environments of the sandstones in ...

    African Journals Online (AJOL)

    Indurated sandstone samples were cut into thin sections for petrographic analysis while a total of 100 pebbles from OAM/1/Abuul were subjected to morphometric analysis. The thin section studies involved the determination of the texture and mineral/framework element compositions of the sandstones through point counting ...

  5. Modal analysis and geochemistry of two sandstones of the Bhander ...

    Indian Academy of Sciences (India)

    fragments are classified as quartz arenite to sublitharenite. The sandstone geochemically reflects high SiO2, moderate Al2O3 and low CaO and Na2O type arenite. The high concentration of HFSE such as Zr, Hf, and Th/Sc, Th/U ratios in these sandstones indicate a mixed provenance. The chondrite normalized REE pattern ...

  6. Petrography and geochemistry of Jurassic sandstones from the ...

    Indian Academy of Sciences (India)

    Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains ...

  7. Petrography and geochemistry of Jurassic sandstones from the ...

    Indian Academy of Sciences (India)

    V Periasamy

    Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic set- ting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains ...

  8. Methodology for the design of the method of siliceous sandstones operation using special software

    Directory of Open Access Journals (Sweden)

    Luis Ángel Lara-González

    2014-12-01

    Full Text Available The methodologies used for the design of the method of sandstones explotation by descending staggered banks using specialized software tools are reported. The data analyzed were collected in the field for the operating license 14816 in Melgar, Tolima. The characterization of the rock mass was held from physical and mechanical tests, performed on cylindrical test tubes in order to obtain the value of the maximum strenght and elastic modulus of the rock. The direction and dip of the sandstone package was rock. The direction and dip of the sandstone package was determined by using the stereographic projection whit DIPS®  software, and the safety factor of the slope was obtained with established banks whit SLIDE® . The slops are 8 meters high and 8 meters wide whit a tilt angle 60°, which generated a safety factor  of 2.1. The design  of the mining method was carried out with GEOVIA SURPAC® , at an early stage of development ascending to the level 11 of the exploitation, to then start mining in descending order to control the stabiLity of slopes. The results obtained allow a general methodology for the development of projects to optimize the process of evaluation and selection of mining method by using specialized design tools.

  9. Pressure sensitivity of low permeability sandstones

    Science.gov (United States)

    Kilmer, N.H.; Morrow, N.R.; Pitman, J.K.

    1987-01-01

    Detailed core analysis has been carried out on 32 tight sandstones with permeabilities ranging over four orders of magnitude (0.0002 to 4.8 mD at 5000 psi confining pressure). Relationships between gas permeability and net confining pressure were measured for cycles of loading and unloading. For some samples, permeabilities were measured both along and across bedding planes. Large variations in stress sensitivity of permeability were observed from one sample to another. The ratio of permeability at a nominal confining pressure of 500 psi to that at 5000 psi was used to define a stress sensitivity ratio. For a given sample, confining pressure vs permeability followed a linear log-log relationship, the slope of which provided an index of pressure sensitivity. This index, as obtained for first unloading data, was used in testing relationships between stress sensitivity and other measured rock properties. Pressure sensitivity tended to increase with increase in carbonate content and depth, and with decrease in porosity, permeability and sodium feldspar. However, scatter in these relationships increased as permeability decreased. Tests for correlations between pressure sensitivity and various linear combinations of variables are reported. Details of pore structure related to diagenetic changes appears to be of much greater significance to pressure sensitivity than mineral composition. ?? 1987.

  10. Natural Erosion of Sandstone as Shape Optimisation.

    Science.gov (United States)

    Ostanin, Igor; Safonov, Alexander; Oseledets, Ivan

    2017-12-11

    Natural arches, pillars and other exotic sandstone formations have always been attracting attention for their unusual shapes and amazing mechanical balance that leave a strong impression of intelligent design rather than the result of a stochastic process. It has been recently demonstrated that these shapes could have been the result of the negative feedback between stress and erosion that originates in fundamental laws of friction between the rock's constituent particles. Here we present a deeper analysis of this idea and bridge it with the approaches utilized in shape and topology optimisation. It appears that the processes of natural erosion, driven by stochastic surface forces and Mohr-Coulomb law of dry friction, can be viewed within the framework of local optimisation for minimum elastic strain energy. Our hypothesis is confirmed by numerical simulations of the erosion using the topological-shape optimisation model. Our work contributes to a better understanding of stochastic erosion and feasible landscape formations that could be found on Earth and beyond.

  11. albitization in the sandstones of inkisi in republic of congo

    African Journals Online (AJOL)

    cerege

    optical microscope, supplemented by some observations and elemental microanalyses by scanning electron microscope (SEM). The optical polarizing .... relatively unaltered crystals of potassium feldspar, ... Plate I: Principal facies of albitization in the Inkisi Formation sandstone, observed under the optical microscope.

  12. Diagenesis and mass transfer between Permo-Triassic sandstones ...

    African Journals Online (AJOL)

    -Triassic sandstones of the Ulster Basin, UK, at different stratigraphic levels. The paragenetic sequences of authigenic minerals both in the sandy and fine-grained sediments (mudstones and siltstones) indicate red bed diagenetic trend.

  13. Experimental Study of Cement - Sandstone/Shale - Brine - CO2 Interactions

    Science.gov (United States)

    2011-01-01

    Background Reactive-transport simulation is a tool that is being used to estimate long-term trapping of CO2, and wellbore and cap rock integrity for geologic CO2 storage. We reacted end member components of a heterolithic sandstone and shale unit that forms the upper section of the In Salah Gas Project carbon storage reservoir in Krechba, Algeria with supercritical CO2, brine, and with/without cement at reservoir conditions to develop experimentally constrained geochemical models for use in reactive transport simulations. Results We observe marked changes in solution composition when CO2 reacted with cement, sandstone, and shale components at reservoir conditions. The geochemical model for the reaction of sandstone and shale with CO2 and brine is a simple one in which albite, chlorite, illite and carbonate minerals partially dissolve and boehmite, smectite, and amorphous silica precipitate. The geochemical model for the wellbore environment is also fairly simple, in which alkaline cements and rock react with CO2-rich brines to form an Fe containing calcite, amorphous silica, smectite and boehmite or amorphous Al(OH)3. Conclusions Our research shows that relatively simple geochemical models can describe the dominant reactions that are likely to occur when CO2 is stored in deep saline aquifers sealed with overlying shale cap rocks, as well as the dominant reactions for cement carbonation at the wellbore interface. PMID:22078161

  14. Diagenesis Along Fractures in an Eolian Sandstone, Gale Crater, Mars

    Science.gov (United States)

    Ming, D. W.; Yen, A. S.; Rampe, E. B.; Grotzinger, J. P.; Blake, D. F.; Bristow, T. F.; Chipera, S. J.; Downs, R.; Morris, R. V.; Morrison, S. M.; hide

    2016-01-01

    The Mars Science Laboratory rover Curiosity has been exploring sedimentary deposits in Gale crater since August 2012. The rover has traversed up section through approx.100 m of sedimentary rocks deposited in fluvial, deltaic, lacustrine, and eolian environments (Bradbury group and overlying Mount Sharp group). The Stimson formation lies unconformable over a lacustrine mudstone at the base of the Mount Sharp group and has been interpreted to be a cross-bedded sandstone of lithified eolian dunes. Mineralogy of the unaltered Stimson sandstone consists of plagioclase feldspar, pyroxenes, and magnetite with minor abundances of hematite, and Ca-sulfates (anhydrite, bassanite). Unaltered sandstone has a composition similar to the average Mars crustal composition. Alteration "halos" occur adjacent to fractures in the Stimson. Fluids passing through these fractures have altered the chemistry and mineralogy of the sandstone. Silicon and S enrichments and depletions in Al, Fe, Mg, Na, K, Ni and Mn suggest aqueous alteration in an open hydrologic system. Mineralogy of the altered Stimson is dominated by Ca-sulfates, Si-rich X-ray amorphous materials along with plagioclase feldspar, magnetite, and pyroxenes, but less abundant in the altered compared to the unaltered Stimson sandstone and lower pyroxene/plagioclase feldspar. The mineralogy and geochemistry of the altered sandstone suggest a complicated history with several (many?) episodes of aqueous alteration under a variety of environmental conditions (e.g., acidic, alkaline).

  15. Sandstone to frac sand: an innovative approach to sourcing high-value sand in NE British Columbia

    Energy Technology Data Exchange (ETDEWEB)

    Broughton, Scott; Chambers, Bob [Stikine Energy Corp (Canada)

    2011-07-01

    With the depletion of conventional energy resources and the rising energy demand, the shale gas industry is growing. In British Columbia, the Horn River Basin, Liard Basin and Montney Basin are large shale plays which are attracting billions of investment dollars. Important volumes of frac sand are required for the development of those plays and the aim of this paper is to present the study carried out by Strikine to find local sources of raw materials which could be transformed in frac sands. The company has located significant quantities of quartz pure sandstones in northeast British Columbia, a pilot trial showed good performance and two projects are under development in the heart of British Columbia's major gas plays. With these projects Strikine will gain a cost advantage over the other frac sand producers due to the proximity of its quartz pure sandstone projects to growing markets.

  16. Dynamic triggering during rupture nucleation in sandstone

    Science.gov (United States)

    Chanard, K.; Nicolas, A.; Latour, S.; Hatano, T.; Vinciguerra, S.; Schubnel, A.

    2016-12-01

    Fluid induced stress perturbations in the crust at seismogenic depths can be caused by various sources, such as deglaciation unloading, magmatic intrusion or fluid injection and withdrawal. Numbers of studies have robustly shown their link to earthquake triggering. However, the role of small periodic stress variations induced by solid earth and oceanic tides or seasonal hydrology in the seismic cycle, of the order of a few kPa, remains unclear. Indeed, the existence or absence of correlation between these loading phenomena and earthquakes have been equally proposed in the literature. To investigate this question, we performed a set of triaxial deformation experiments on porous water-saturated Fontainebleau sandstones. Rock samples were loaded by the combined action of steps of constant stress (creep), intended to simulate tectonic loading and small sinusoidal pore pressure variations with a range of amplitudes, analogous to tides or seasonal loading. All tests were conducted at a regulated temperature of 35C and a constant 35 MPa confining pressure. Our experimental results show that (1) pore pressure oscillations do not seem to influence the deformation rate at which the rock fails, (2) they correlate with acoustic emissions. Even more interestingly, we observe a progressive increase of the correlation coefficient in time as the rock approaches failure. The correlation coefficient is also sensitive to the amplitude of pore pressure oscillations as larger oscillations produce higher correlation levels. Finally, we show that, in the last hours of creep before failure, acoustic emissions occur significantly more when the pore pressure is at its lowest. This suggest that the correlation of small stress perturbations and acoustic emissions depend on the state stress of a rock and the amplitude of the perturbations and that emissions occur more likely when cracks are unclamped.

  17. Diagenetic effect on permeabilities of geothermal sandstone reservoirs

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kristensen, Lars

    The Danish subsurface contains abundant sedimentary deposits, which can be utilized for geothermal heating. The Upper Triassic – Lower Jurassic continental-marine sandstones of the Gassum Formation has been utilised as a geothermal reservoir for the Thisted Geothermal Plant since 1984 extracting...... and permeability is caused by increased diagenetic changes of the sandstones due to increased burial depth and temperatures. Therefore, the highest water temperatures typically correspond with the lowest porosities and permeabilities. Especially the permeability is crucial for the performance of the geothermal......-line fractures. Continuous thin chlorite coatings results in less porosity- and permeability-reduction with burial than the general reduction with burial, unless carbonate cemented. Therefore, localities of sandstones characterized by these continuous chlorite coatings may represent fine geothermal reservoirs...

  18. Pore microgeometry analysis in low-resistivity sandstone reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Cerepi, Adrian [Institut EGID-Bordeaux 3, Universite Michel de Montaigne, 1, allee F. Daguin, 33607, cedex Pessac (France); Durand, Claudine; Brosse, Etienne [Institut Francais du Petrole, 1 and 4 avenue de Bois Preau, 92852, cedex Rueil-Malmaison (France)

    2002-08-01

    The objective of this work is to analyse the pore microgeometry and its effect on petrophysical properties in six low-resistivity sandstone reservoirs by combining a 2D quantitative petrographic image analysis (PIA) and 3D petrophysical tools. The classic petrophysical tools enable the measurement of different classic reservoir properties such as specific surface area, average pore diameter, pore size distribution, macroporosity and microporosity, capillary pressure versus saturation, pore chamber-pore throat diameter ratio, electrical properties and permeability. The petrographic image analysis quantifies pore microgeometry in more than four orders of magnitude, from submicron to millimeter scale. Chloritic low-resistivity sandstones show dual porosity structure defined as chloritic texture. The pore microgeometrical parameters measured by petrographic image analysis allow one to model different reservoir properties such as capillary pressure, permeability and electrical behaviour. The results obtained in these models show that pore microgeometry plays an important role in the physical properties of low-resistivity sandstone reservoirs.

  19. RESERVOIR CHARACTERIZATION OF UPPER DEVONIAN GORDON SANDSTONE, JACKSONBURG STRINGTOWN OIL FIELD, NORTHWESTERN WEST VIRGINIA

    Energy Technology Data Exchange (ETDEWEB)

    S. Ameri; K. Aminian; K.L. Avary; H.I. Bilgesu; M.E. Hohn; R.R. McDowell; D.L. Matchen

    2001-07-01

    The Jacksonburg-Stringtown oil field contained an estimated 88,500,000 barrels of oil in place, of which approximately 20,000,000 barrels were produced during primary recovery operations. A gas injection project, initiated in 1934, and a pilot waterflood, begun in 1981, yielded additional production from limited portions of the field. The pilot was successful enough to warrant development of a full-scale waterflood in 1990, involving approximately 8,900 acres in three units, with a target of 1,500 barrels of oil per acre recovery. Historical patterns of drilling and development within the field suggests that the Gordon reservoir is heterogeneous, and that detailed reservoir characterization is necessary for understanding well performance and addressing problems observed by the operators. The purpose of this work is to establish relationships among permeability, geophysical and other data by integrating geologic, geophysical and engineering data into an interdisciplinary quantification of reservoir heterogeneity as it relates to production. Conventional stratigraphic correlation and core description shows that the Gordon sandstone is composed of three parasequences, formed along the Late Devonian shoreline of the Appalachian Basin. The parasequences comprise five lithofacies, of which one includes reservoir sandstones. Pay sandstones were found to have permeabilities in core ranging from 10 to 200 mD, whereas non-pay sandstones have permeabilities ranging from below the level of instrumental detection to 5 mD; Conglomeratic zones could take on the permeability characteristics of enclosing materials, or could exhibit extremely low values in pay sandstone and high values in non-pay or low permeability pay sandstone. Four electrofacies based on a linear combination of density and scaled gamma ray best matched correlations made independently based on visual comparison of geophysical logs. Electrofacies 4 with relatively high permeability (mean value > 45 mD) was

  20. Hydrogeology of the Potsdam Sandstone in northern New York

    Science.gov (United States)

    Williams, John H.; Reynolds, Richard J.; Franzi, David A.; Romanowicz, Edwin A.; Paillet, Frederick L.

    2010-01-01

    The Potsdam Sandstone of Cambrian age forms a transboundary aquifer that extends across northern New York and into southern Quebec. The Potsdam Sandstone is a gently dipping sequence of arkose, subarkose, and orthoquartzite that unconformably overlies Precambrian metamorphic bedrock. The Potsdam irregularly grades upward over a thickness of 450 m from a heterogeneous feldspathic and argillaceous rock to a homogeneous, quartz-rich and matrix-poor rock. The hydrogeological framework of the Potsdam Sandstone was investigated through an analysis of records from 1,500 wells and geophysical logs from 40 wells, and through compilation of GIS coverages of bedrock and surficial geology, examination of bedrock cores, and construction of hydrogeological sections. The upper several metres of the sandstone typically is weathered and fractured and, where saturated, readily transmits groundwater. Bedding-related fractures in the sandstone commonly form sub-horizontal flow zones of relatively high transmissivity. The vertical distribution of sub-horizontal flow zones is variable; spacings of less than 10 m are common. Transmissivity of individual flow zones may be more than 100 m2/d but typically is less than 10 m2/d. High angle fractures, including joints and faults, locally provide vertical hydraulic connection between flow zones. Hydraulic head gradients in the aquifer commonly are downward; a laterally extensive series of sub-horizontal flow zones serve as drains for the groundwater flow system. Vertical hydraulic head differences between shallow and deep flow zones range from 1 m to more than 20 m. The maximum head differences are in recharge areas upgradient from the area where the Chateauguay and Chazy Rivers, and their tributaries, have cut into till and bedrock. Till overlies the sandstone in much of the study area; its thickness is generally greatest in the western part, where it may exceed 50 m. A discontinuous belt of bedrock pavements stripped of glacial drift extends

  1. The effect of hot water injection on sandstone permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Haugwitz, Christian; Jacobsen, Peter Sally Munch

    2014-01-01

    Seasonal energy storage can be achieved by hot water injection in geothermal sandstone aquifers. We present an analysis of literature data in combination with new short-term flow through permeability experiments in order to address physical and physico-chemical mechanisms that can alter permeabil......Seasonal energy storage can be achieved by hot water injection in geothermal sandstone aquifers. We present an analysis of literature data in combination with new short-term flow through permeability experiments in order to address physical and physico-chemical mechanisms that can alter...

  2. Roughness of sandstone fracture surfaces: Profilometry and shadow length investigations

    OpenAIRE

    Boffa, Jean-Marc; Allain, C.; Chertcoff, R.; Hulin, Jean-Pierre; Plouraboué, Franck; Roux, Stéphane

    1999-01-01

    The geometrical properties of fractured sandstone surfaces were studied by measuring the length distribution of the shadows appearing under grazing illumination. Three distinct domains of variation were found: at short length scales a cut-off of self-affinity is observed due to the inter-granular rupture of sandstones, at long length scales, the number of shadows falls off very rapidly because of the non-zero illumination angle and of the finite roughness amplitude. Finally, in the intermediate do...

  3. Natural and Laboratory-Induced Compaction Bands in Aztec Sandstone

    Science.gov (United States)

    Haimson, B. C.; Lee, H.

    2002-12-01

    The Aztec sandstone used in this research is from the Valley of Fire State Park area, Nevada. This Jurassic aeolian sandstone is extremely weak (uniaxial compressive strength of 1-2 MPa); porosity averages 26%; grains are subrounded and have a bimodal size distribution (0.1 mm and 0.5 mm); its mineral composition (K. Sternlof, personal comm.) is 93% quartz, 5% k-spar, and 2% kaolinite, Fe carbonate and others; grain bonding is primarily through suturing. Sternlof et al. (EOS, November, 2001) observed substantial exposure of mainly compactive deformation bands in the Aztec sandstone. We studied an SEM image of a compaction band found in a hand sample of the Aztec sandstone. We also conducted a drilling test in a 130x130x180 mm prismatic specimen subjected to a preset far-field true triaxial stress condition (\\sigmah = 15 MPa, \\sigmav = 25 MPa, \\sigmaH = 40 MPa). Drilling of a 20 mm dia. vertical hole created a long fracture-like thin tabular breakout along the \\sigmah springline and perpendicular to \\sigmaH direction. SEM analysis of the zones ahead of the breakout tips revealed narrow bands of presumed debonded intact grains interspersed with grain fragments. We infer that the fragments were formed from multiple splitting or crushing of compacted grains in the band of high compressive stress concentration developed along the \\sigmah springline. SEM images away from the breakout tip surroundings showed no such fragments. SEM study of the natural compaction band showed a similar arrangement of mainly intact grains surrounded by grain fragments. Using the Optimas optical software package, we found the percentage of pore area within the band ahead of the breakout tips to average 17%; outside of this zone it was 23%. In the natural compaction band pore area occupied 8.5% of the band; in the host rock adjacent to the compaction band it averaged 19%. These readings strongly suggest porosity reduction due to compaction in both cases. The close resemblance between the

  4. Geochemistry and diagenetic history of the Ordovician Lower Head Formation sandstones, western Newfoundland, Canada

    National Research Council Canada - National Science Library

    Azmy, Karem; Conliffe, James; Blamey, Nigel J.F

    2016-01-01

    ...) comprises siltstones with very fine grained to fine-grained sandstones. Petrography confirms that these sandstones are matrix rich, essentially wackes, with detrital minerals including quartz, feldspar, biotite, and numerous accessory minerals...

  5. Trilobites from the Middle Ordovician Stairway Sandstone, Amadeus Basin, central Australia

    DEFF Research Database (Denmark)

    Jakobsen, Kristian Grube; Nielsen, Arne Thorshøj; Harper, David Alexander Taylor

    2014-01-01

    During the Middle Ordovician (Darriwilian) sandstones and siltstones were deposited in the epicontinental Larapintine Sea, which covered large parts of central Australia. The Darriwilian Stairway Sandstone has, for the first time, been sampled stratigraphically for macrofossils to track marine...

  6. paleomagnetic dating of the enticho sandstone at negash locality

    African Journals Online (AJOL)

    Sinet

    origin and interpreted as the Characteristic Remanent Magnetization (ChRM). Directions of magnetizations and site-mean directions in the in-situ .... for representative specimens from Enticho Sandstone at Negash. (B) AF demagnetization curve of the IRM experiment in A; the corresponding specimen names are given.

  7. INTRODUCTION Sandstone beds within Auchi locality are the ...

    African Journals Online (AJOL)

    Geological Survey report described the lithostratigraphic unit as False bedded Sandstone. Reyment (1965) ... Department of Applied Geology,. Federal University of Technology Akure. (Corresponding Author: ...... Oluyemi, E.A. and Olabanji, I.O.. Heavy Metals Determination in Some Species of Frozen. Fish Sold at Ile-Ife ...

  8. Nodular features from Proterozoic Sonia Sandstone, Jodhpur Group ...

    Indian Academy of Sciences (India)

    solubility of silica drastically, and (ii) by provid- ing local seeds or templates to help silica nucle- ate (Knoll 1985; Simonson 1987). The amorphous silica cementation, in patches as fringe-cement, at the early stage of burial caused partial lithification of the sandstone and triggered inhomogeneous dia- genetic behaviour on ...

  9. Diagenesis, provenance and depositional environments of the Bunter Sandstone Formation

    DEFF Research Database (Denmark)

    Olivarius, Mette; Weibel, Rikke; Friis, Henrik

    The Bunter Sandstone Formation in the northern North German Basin has large geothermal potential with high porosity and permeability (generally >15% and >100 mD, respectively) and with pore fluid temperatures that are adequate for geothermal energy production (c. 55–60˚C). A combined investigation...

  10. Influence of fluvial sandstone architecture on geothermal energy production

    NARCIS (Netherlands)

    Willems, C.J.L.; Maghami Nick, Hamidreza M.; Weltje, G.J.; Donselaar, M.E.; Bruhn, D.F.

    2015-01-01

    Fluvial sandstone reservoirs composed of stacked meander belts are considered as potential geothermal resources in the Netherlands. Net-to-gross, orientation and stacking pattern of the channel belts is of major importance for the connectivity between the injection and production well in such

  11. Diagenesis and mass transfer between Permo-Triassic sandstones ...

    African Journals Online (AJOL)

    samples were examined under a JEOL 6400 scanning electron microscope equipped with energy dispersive X-ray ... that feldspar overgrowths and crystals are widely distributed throughout the sandstones, and the interbedded ... extensive precipitation of calcite (C) crystals in sandy facies that interbedded within the Mercia.

  12. Provenance of the Late Neogene Siwalik sandstone, Kumaun ...

    Indian Academy of Sciences (India)

    An understanding about lithology, tectonics and unroofing history of provenance is mostly drawn from ... history of Late Neogene Siwalik sandstone of the ...... and Tibet: Mountain Roots to Mountain Tops (eds). Macfarlane A, Sorkhabi R B and Quade (Colorado: Boulder), J. Geol. Soc. Am. Spec. Paper, pp. 239–256.

  13. Provenance of sandstone on the western flank of Anambra Basin ...

    African Journals Online (AJOL)

    The localities are in the western flank of the Anambra basin, southwestern Nigeria. Petrographic study shows that the sandstone deposits are composed of variable amounts of quartz, feldspars and lithic fragments with minor occurrence of authigenic silica and chlorite cements. Quartz is the predominant detrital mineral in all ...

  14. Comparison of authigenic minerals in sandstones and interbedded ...

    African Journals Online (AJOL)

    Mechanically infiltrated clays, grain-coating clay/hematite, quartz and feldspar overgrowths, carbonate cements and pore-filling and pore-lining clay minerals that precipitated in the sandy facies also precipitated in the fine-grained sediments. The abundance of authigenic minerals in decreasing order include: sandstone ...

  15. comparison of authigenic minerals in sandstones and interbedded

    African Journals Online (AJOL)

    a

    shaly facies dominated by detrital clay, carbonate, quartz and feldspars framework grains. Authigenic minerals such as quartz, albite and K-feldspar are absent in the shaly facies, possibly related to early destruction of porosity. The lacustrine sandstones, siltstones and mudstones followed marine diagenetic trend, whereas ...

  16. Sedimentological characteristics of Ajali sandstone in the Benin ...

    African Journals Online (AJOL)

    The major framework composition is Q95.6 F3.2 L1.2 which classifies the sandstone as Quartz arenite. Non-opaque heavy minerals constitute 13% of the entire heavy mineral suite of which ZTR index is 87%. The grains are texturally immature as depicted by their subangular edges but mineralogically mature in terms of ...

  17. Origin of carbonate cements in Cretaceous sandstones from lower ...

    African Journals Online (AJOL)

    Beds of authigenic carbonates were identified from three Cretaceous lithostratigraphic units of the Lower Benue Trough, Nigeria. Three carbonate lithologies were recognized by petrographic analysis in the study area. Carbonate-cemented sandstones are dominated by ferroan calcite cements with subordinate amount of ...

  18. diagenesis and mass transfer between permo-triassic sandstones ...

    African Journals Online (AJOL)

    Beds of siltstone, mudstone and shale are interbedded in the Permo-Triassic sandstones of the Ulster Basin, UK, at different stratigraphic levels. The paragenetic sequences of authigenic minerals both in the sandy and fine-grained sediments (mudstones and siltstones) indicate red bed diagenetic trend. Abundant ...

  19. Albitization in the Inkisi Sandstones, Republic of Congo ...

    African Journals Online (AJOL)

    In this paper, we present the process of albitization in the context of an African sedimentary basin, in particular the Neoproterozoic to Palaeozoic arkosic sandstones of the Niari basin in the Republic of Congo. Differents faciès, mineral parageneses associated, chemical compositions of these albitizations are presented.

  20. INTRODUCTION Sandstone beds within Auchi locality are the ...

    African Journals Online (AJOL)

    mineralogical compositions in order to establish the depositional history in the extreme western margin of the formation. SEDIMENTOLOGICAL CHARACTERISTICS OF AJALI SANDSTONE IN THE. BENIN FLANK OF ANAMBRA BASIN, NIGERIA. Adekoya, J.A., Aluko, A.F. and Opeloye, S.A.. Department of Applied Geology,.

  1. Petrography and geochemistry of turonian eze-aku sandstone ...

    African Journals Online (AJOL)

    An integrated petrographic and geochemical study of the Turonian sandstone of Eze-Aku Formation exposed within the southern portion of the Benue trough, was undertaken to infer ... Tectonic setting discrimination diagrams based on major elements suggest a continental block provenance in a passive continental margin.

  2. Geological and Petrophysical Characterization of the Ferron Sandstone for 3-D Simulation of a Fluvial-Deltaic Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Chidsey, Jr, Thomas C.

    2001-10-31

    The objective of the Ferron Sandstone project was to develop a comprehensive, interdisciplinary, quantitative characterization f fluvial-deltaic reservoir to allow realistic interwell and reservoir-scale models to be developed for improved oil-field development in similar reservoirs world-wide. Quantitative geological and petrophysical information on the Cretaceous Ferron Sandstone in east-central Utah was collected. Both new and existing data was integrated into a three-dimensional model of spatial variations in porosity, storativity, and tensorial rock permeability at a scale appropriate for inter-well to regional-scale reservoir simulation. Simulation results could improve reservoir management through proper infill and extension drilling strategies, reduction of economic risks, increased recovery from existing oil fields, and more reliable reserve calculations.

  3. Reservoir heterogeneity in carboniferous sandstone of the Black Warrior basin. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kugler, R.L.; Pashin, J.C.; Carroll, R.E.; Irvin, G.D.; Moore, H.E.

    1994-06-01

    Although oil production in the Black Warrior basin of Alabama is declining, additional oil may be produced through improved recovery strategies, such as waterflooding, chemical injection, strategic well placement, and infill drilling. High-quality characterization of reservoirs in the Black Warrior basin is necessary to utilize advanced technology to recover additional oil and to avoid premature abandonment of fields. This report documents controls on the distribution and producibility of oil from heterogeneous Carboniferous reservoirs in the Black Warrior basin of Alabama. The first part of the report summarizes the structural and depositional evolution of the Black Warrior basin and establishes the geochemical characteristics of hydrocarbon source rocks and oil in the basin. This second part characterizes facies heterogeneity and petrologic and petrophysical properties of Carter and Millerella sandstone reservoirs. This is followed by a summary of oil production in the Black Warrior basin and an evaluation of seven improved-recovery projects in Alabama. In the final part, controls on the producibility of oil from sandstone reservoirs are discussed in terms of a scale-dependent heterogeneity classification.

  4. Reservoir heterogeneity in Carboniferous sandstone of the Black Warrior basin. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kugler, R.L.; Pashin, J.C.; Carroll, R.E.; Irvin, G.D.; Moore, H.E.

    1994-04-01

    Although oil production in the Black Warrior basin of Alabama is declining, additional oil may be produced through improved recovery strategies, such as waterflooding, chemical injection, strategic well placement, and infill drilling. High-quality characterization of reservoirs in the Black Warrior basin is necessary to utilize advanced technology to recover additional oil and to avoid premature abandonment of fields. This report documents controls on the distribution and producibility of oil from heterogeneous Carboniferous reservoirs in the Black Warrior basin of Alabama. The first part of the report summarizes the structural and depositional evolution of the Black Warrior basin and establishes the geochemical characteristics of hydrocarbon source rocks and oil in the basin. This second part characterizes facies heterogeneity and petrologic and petrophysical properties of Carter and Millerella sandstone reservoirs. This is followed by a summary of oil production in the Black Warrior basin and an evaluation of seven improved-recovery projects in Alabama. In the final part, controls on the producibility of oil from sandstone reservoirs are discussed in terms of a scale-dependent heterogeneity classification.

  5. Traces of the heritage arising from the Macelj sandstone

    Science.gov (United States)

    Golež, Mateja

    2014-05-01

    The landscape of Southeast Slovenia and its stone heritage principally reveal itself through various Miocene sandstones. The most frequently found type on the borderline between Slovenia and Croatia, i.e. east of Rogatec, is the micaceous-quartz Macelj sandstone. This rock ranges in colour from greenish grey to bluish grey and yellowish, depending on the content of glauconite, which colours it green. In its composition, the rock is a heterogeneous mixture of grains of quartz, dolomite, muscovite, microcline, anorthite and glauconite. The average size of grains is 300μm. In cross-section, they are oblong, semi-rounded or round. The mechanical-physical and durability properties of the Macelj sandstone, which have been characterised pursuant to the applicable standards for natural stone, reveal that the rock exhibits poor resistance to active substances from the atmosphere, particularly in the presence of salt. In the surroundings of Rogatec, there are around 45 abandoned quarries of the Macelj sandstone, which are the result of the exploitation of this mineral resource from the 17th century on. The local quarrymen earned their bread until 1957, when the Kambrus quarry industry closed down. From the original use of this mineral resource as construction and decorative material, the useful value of the Macelj sandstone expanded during the development of the metals industry to the manufacture of large and small grindstones for the needs of the domestic and international market. Therefore, traces of quarrying can not only be seen in the disused quarries, but also in the rich architectural heritage of Rogatec and its surroundings, the stone furniture - from portals, window frames, wells, various troughs, pavements to stone walls - and other. The living quarrying heritage slowly passed into oblivion after World War II, although the analysis of the social image of the people residing in Rogatec and its surroundings revealed that there was an average of one stonemason in

  6. Effect Of Hot Water Injection On Sandstone Permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Fabricius, Ida Lykke

    2012-01-01

    The seasonal imbalance between supply and demand of renewable energy requires temporary storage, which can be achieved by hot water injection in warm aquifers. This requires that the permeability and porosity of the aquifer are not reduced significantly by heating. We present an overview...... of published results regarding the effect of temperature on sandstone permeability. These tests are performed with mineral oil, nitrogen gas, distilled water and solutions of NaCl, KCl, CaCl2 as well as brines that contain a mixture of salts. Thirteen sandstone formations, ranging from quartz arenites...... not account for all the permeability reductions observed. Permeablity reduction occurs both when distilled water is the saturating fluid as well as in tests with NaCl, KCl or CaCl2 solutions, however, this is not the case in tests with mineral oil or nitrogen gas. The formation of a filter cake or influx...

  7. New acid systems for sandstone stimulation. [Oil wells

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G.J.; Wong, T.C.T.; Mungan, N.

    1982-01-01

    A new series of prepackaged acid systems have been developed for stimulation of sandstone formations. The original system, containing phosphoric acid and other additives (P.P.A.S.) was specifically formulated to overcome several limitations of existing acid systems. The scope of applications for P.P.A.S. has since been expanded by combining HCl (Hydrochloric acid) or HF (Hydrofluoric acid) with the P.P.A.S. to form hybrid systems that have unique properties. These new systems have been successfully used for stimulating sandstone formations that have been difficult to treat with existing acid systems. The problems associated with currently used acids and their limitations are compared to the P.P.A.S. to illustrate the advantages of these new systems. 10 refs.

  8. Micromechanics of compaction in an analogue reservoir sandstone

    Energy Technology Data Exchange (ETDEWEB)

    DIGIOVANNI,ANTHONY A.; FREDRICH,JOANNE T.; HOLCOMB,DAVID J.; OLSSON,WILLIAM A.

    2000-02-28

    Energy production, deformation, and fluid transport in reservoirs are linked closely. Recent field, laboratory, and theoretical studies suggest that, under certain stress conditions, compaction of porous rocks may be accommodated by narrow zones of localized compressive deformation oriented perpendicular to the maximum compressive stress. Triaxial compression experiments were performed on Castlegate, an analogue reservoir sandstone, that included acoustic emission detection and location. Initially, acoustic emissions were focused in horizontal bands that initiated at the sample ends (perpendicular to the maximum compressive stress), but with continued loading progressed axially towards the center. This paper describes microscopy studies that were performed to elucidate the micromechanics of compaction during the experiments. The microscopy revealed that compaction of this weakly-cemented sandstone proceeded in two phases: an initial stage of porosity decrease accomplished by breakage of grain contacts and grain rotation, and a second stage of further reduction accommodated by intense grain breakage and rotation.

  9. Provenance of the lower Triassic bunter sandstone formation

    DEFF Research Database (Denmark)

    Olivarius, Mette; Weibel, Rikke; Friis, Henrik

    2017-01-01

    Zircon U–Pb geochronometry, heavy mineral analyses and conventional seismic reflection data were used to interpret the provenance of the Lower Triassic Bunter Sandstone Formation. The succession was sampled in five Danish wells in the northern part of the North German Basin. The results show...... in the platform area and marginal basin area, but the complex sand-body architecture makes it difficult to predict the reservoir quality. Continue reading full article...

  10. New Acid Combination for a Successful Sandstone Acidizing

    Science.gov (United States)

    Shafiq, M. U.; Mahmud, H. K. B.; Rezaee, R.

    2017-05-01

    With the development of new enhanced oil recovery techniques, sandstone acidizing has been introduced and played a pivotal role in the petroleum industry. Different acid combinations have been applied, which react with the formation, dissolve the soluble particles; thus increase the production of hydrocarbons. To solve the problems which occurred using current preflush sandstone acidizing technology (hydrochloric acid); a new acid combination has been developed. Core flooding experiments on sandstone core samples with dimensions 1.5 in. × 3 in. were conducted at a flow rate of 2 cm3/min. A series of hydrochloric-acetic acid mixtures with different ratios were tested under 150°F temperature. The core flooding experiments performed are aimed to dissolve carbonate, sodium, potassium and calcium particles from the core samples. These experiments are followed by few important tests which include, porosity-permeability, pH value, Inductively Coupled Plasma (ICP) analysis and Nuclear Magnetic Resonance (NMR measurements). All the results are compared with the results of conventional hydrochloric acid technology. NMR and porosity analysis concluded that the new acid combination is more effective in creating fresh pore spaces and thus increasing the reservoir permeability. It can be seen from the pore distribution before and after the acidizing. Prior applying acid; the large size of pores appears most frequently in the pore distribution while with the applied acid, it was found that the small pore size is most the predominant of the pore distribution. These results are validated using ICP analysis which shows the effective removal of calcium and other positive ions from the core sample. This study concludes that the combination of acetic-hydrochloric acid can be a potential candidate for the preflush stage of sandstone acidizing at high temperature reservoirs.

  11. Laboratory calibration of the seismo-acoustic response of CO2 saturated sandstones

    Science.gov (United States)

    Siggins, A. F.; Lwin, M.; Wisman, P.

    2009-04-01

    Geological sequestration can be regarded as one of the promising mitigation strategies against the negative effects of atmospheric carbon dioxide on global climate change. Injection of CO2into depleted natural gas reservoirs in particular, sandstone formations at depth with suitable porosity and seals, seems to be a promising scenario for on-land storage. In fact, a demonstration project is currently underway in the Otway Basin in South Eastern Australia under the auspices of the Australian CO2CRC. One of the most useful geophysical remote sensing tools for monitoring sub surface CO2 injection is seismic imaging. Interpretation of seismic data for the quantitative measurement of the distribution and saturations of CO2 in the subsurface requires a knowledge of the effects of CO2as a pore fluid on the seismo-acoustic response of the reservoir rocks. This report describes some recent experiments that we have conducted to investigate this aspect under controlled laboratory conditions at pressures representative of in-situ reservoir conditions. Prior to the availability of core from the actual Otway injection site, two synthetic sandstones were tested ultrasonically in a computer controlled triaxial testing rig under a range of confining pressures and pore pressures representative of in-situ reservoir pressures. These sandstones comprised; (1) a synthetic material with calcite intergranular cement (CIPS) and (2), a synthetic sandstone with silica intergranular cement. Porosities of the sandstones were respectively, 32%,and 33%. Initial testing was carried on the cores at room temperature-dried condition with confining pressures up to 65MPa in steps of 5 MPa. Cores were then flooded with CO2, initially at 6MPa, 22 degrees C, then with liquid phase CO2at pressures from 7MPa to 17 MPa in steps of 5 MPa. Confining pressures varied from 10 MPa to 65 MPa. A limited number of experiments were also conducted in an additional rig at 50oC with supercritical phase CO2. Ultrasonic

  12. Lack of inhibiting effect of oil emplacement on quartz cementation: Evidence from Cambrian reservoir sandstones, Paleozoic Baltic Basin

    DEFF Research Database (Denmark)

    Molenaar, Nicolaas; Cyziene, Jolanta; Sliaupa, Saulius

    2008-01-01

    , including sandstone architecture, i.e., distribution of shales within the sandstone bodies, and sandstone thickness. Heterogeneity is inherent to sandstone architecture and to the fact that silica for quartz cementation is derived from heterogeneously distributed local pressure solution. Models predicting...

  13. On the water saturation calculation in hydrocarbon sandstone reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Stalheim, Stein Ottar

    2002-07-01

    The main goal of this work was to identify the most important uncertainty sources in water saturation calculation and examine the possibility for developing new S{sub w} - equations or possibility to develop methods to remove weaknesses and uncertainties in existing S{sub w} - equations. Due to the need for industrial applicability of the equations we aimed for results with the following properties: The accuracy in S{sub w} should increase compared with existing S{sub w} - equations. The equations should be simple to use in petrophysical evaluations. The equations should be based on conventional logs and use as few as possible input parameters. The equations should be numerical stable. This thesis includes an uncertainty and sensitivity analysis of the most common S{sub w} equations. The results are addressed in chapter 3 and were intended to find the most important uncertainty sources in water saturation calculation. To increase the knowledge of the relationship between R{sub t} and S{sub w} in hydrocarbon sandstone reservoirs and to understand how the pore geometry affects the conductivity (n and m) of the rock a theoretical study was done. It was also an aim to examine the possibility for developing new S{sub w} - equations (or investigation an effective medium model) valid inhydrocarbon sandstone reservoirs. The results are presented in paper 1. A new equation for water saturation calculation in clean sandstone oil reservoirs is addressed in paper 2. A recommendation for best practice of water saturation calculation in non water wet formation is addressed in paper 3. Finally a new equation for water saturation calculation in thinly interbedded sandstone/mudstone reservoirs is presented in paper 4. The papers are titled: 1) Is the saturation exponent n a constant. 2) A New Model for Calculating Water Saturation In 3) Influence of wettability on water saturation modeling. 4) Water Saturation Calculations in Thinly Interbedded Sandstone/mudstone Reservoirs. A

  14. Experimental deformation in sandstone, carbonates and quartz aggregate

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, Cecilia See Nga [Stony Brook Univ., NY (United States)

    2015-05-01

    The first part of my thesis is mainly focused on the effect of grain size distribution on compaction localization in porous sandstone. To identify the microstructural parameters that influence compaction band formation, I conducted a systematic study of mechanical deformation, failure mode and microstructural evolution in Bleurswiller and Boise sandstones, of similar porosity (~25%) and mineralogy but different sorting. Discrete compaction bands were observed to develop over a wide range of pressure in the Bleurswiller sandstone that has a relatively uniform grain size distribution. In contrast, compaction localization was not observed in the poorly sorted Boise sandstone. My results demonstrate that grain size distribution exerts important influence on compaction band development, in agreement with recently published data from Valley of Fire and Buckskin Gulch, as well as numerical studies. The second part aimed to improve current knowledge on inelastic behavior, failure mode and brittle-ductile transition in another sedimentary rock, porous carbonates. A micritic Tavel (porosity of ~13%) and an allochemical Indiana (~18%) limestones were deformed under compaction in wet and dry conditions. At lower confining pressures, shear localization occurred in brittle faulting regime. Through transitional regime, the deformation switched to cataclastic flow regime at higher confining pressure. Specifically in the cataclastic regime, the (dry and wet) Tavel and dry Indiana failed by distributed cataclastic flow, while in contrast, wet Indiana failed as compaction localization. My results demonstrate that different failure modes and mechanical behaviors under different deformation regimes and water saturation are fundamental prior to any geophysical application in porous carbonates. The third part aimed to focus on investigating compaction on quartz aggregate starting at low (MPa) using X-ray diffraction. We report the diffraction peak evolution of quartz with increasing

  15. "The Ruins": Large cold seep sandstone chimneys in the upper Miocene Santa Margarita Sandstone, Scotts Valley, CA

    Science.gov (United States)

    Schwartz, H.; Bazan, C.; Perry, F.; Garrison, R. E.

    2012-12-01

    In 1856 a peculiar letter in a San Francisco newspaper reported the discovery of an ancient ruin on a sandy hillside in Scotts Valley, CA (Santa Cruz County). The purported "great and magnificent structure" consisted of 50 sandstone columns, some of which were said to be capped by a dome. Exploration of the site by speculators and treasure hunters in the 1850's produced no artifacts or evidence of human activity and regrettably resulted in removal or destruction of most of the original columns. Despite its depletion, and subsequent assessment as a wholly geological phenomenon, the locality is still known locally as "The Ruins". In order to evaluate the origin of the distinctive cementation at the Ruins we mapped its remaining features and collected samples for petrographic, XRD and stable isotope analysis. The site, presently located on private property, consists of at least 12 columns and numerous flattened, discontinuous slabs of well indurated sandstone exposed over ~160 square meters. Stratigraphically it is in the uppermost part of the upper Miocene Santa Margarita Sandstone, 7-15 m below its contact with the overlying Santa Cruz Mudstone. The columns range from 0.5-2 m in diameter and the tallest rises 1.5 m above the surface. All of the columns are distinctly chimney-like, with circular cross sections and hollow central cavities that in some cases are partially filled with separately cemented rings. They describe a SW-NE linear trend on the south side of a hill. A horizon of sandstone slabs, 0.2-1.7 m in length, stratigraphically overlies the chimneys at the top of the hill. Both chimneys and slabs consist of coarse-grained, moderately-sorted sandstone cemented by sparry low-Mg calcite. Most samples also contain abundant remains of the echinoid Astrodapsis spatiosus. δ18O values range from -5.15‰ (chimney) to -2.32‰ (slab); δ13C values range from -19.89‰ (chimney) to -1.95‰ (slab). Stable isotope values seem tied to location rather than contrasting

  16. Characterizing flow pathways in a sandstone aquifer at multiple depths

    Science.gov (United States)

    Medici, Giacomo; West, Jared; Mountney, Nigel

    2017-04-01

    Sandstone aquifers are commonly assumed to represent porous media characterized by a permeable matrix. However, such aquifers may be heavily fractured where rock properties and timing of deformation favour brittle failure and crack opening. In many aquifer types, fractures associated with faults, bedding planes and stratabound joints represent preferential pathways for fluids and contaminants. This presentation reports well-test results and outcrop-scale studies that reveal how strongly lithified siliciclastic rocks may be entirely dominated by fracture flow at shallow depths (≤ 150 m), similar to limestone and crystalline aquifers. The Triassic St Bees Sandstone Formation of the UK East Irish Sea Basin represents an optimum succession for study of the influence of both sedimentary and tectonic aquifer heterogeneities in a strongly lithified sandstone aquifer-type. This sedimentary succession of fluvial origin accumulated in rapidly subsiding basins, which typically favour preservation of complete depositional cycles, including fine-grained mudstone and silty sandstone layers of floodplain origin interbedded with sandstone-dominated fluvial channel deposits. Vertical joints in the St Bees Sandstone Formation form a pervasive stratabound system whereby joints terminate at bedding-parallel discontinuities. Additionally, normal faults are present through the succession and record development of open-fractures in their damage zones. Here, the shallow aquifer (depth ≤150 m BGL) was characterized in outcrop and well tests. Fluid temperature, conductivity and flow-velocity logs record inflows and outflows from normal faults, as well as from pervasive bed-parallel fractures. Quantitative flow logging analyses in boreholes that cut fault planes indicate that zones of fault-related open fractures typically represent ˜ 50% of well transmissivity. The remaining flow component is dominated by bed-parallel fractures. However, such sub-horizontal fractures become the

  17. Effect of Various Silica Nanofluids: Reduction of Fines Migrations and Surface Modification of Berea Sandstone

    OpenAIRE

    Abhishek, Rockey; Hamouda, Aly Anis

    2017-01-01

    Abstract: This work is aimed at addressing surface modification of berea sandstone by silica nanofluids (NFs). Three types of nanofluids were used: silica/deionized water (DIW), silica in DIW with a stabilizer fluid (3-Mercaptopropyl Trimethoxysilane) and sulfonate-functionalized silica in DIW. Core flood studies showed that application of silica nanoparticles (NPs) improved water injectivity in sandstone. The change in the measured zeta potential indicated surface modification of sandstone b...

  18. Mineralogy and uranium leaching of ores from Triassic Peribaltic sandstones.

    Science.gov (United States)

    Gajda, Dorota; Kiegiel, Katarzyna; Zakrzewska-Koltuniewicz, Grazyna; Chajduk, Ewelina; Bartosiewicz, Iwona; Wolkowicz, Stanislaw

    The recovery of uranium and other valuable metals from Polish Peribaltic sandstones were examined. The solid-liquid extraction is the first stage of the technology of uranium production and it is crucial for the next stages of processing. In the laboratory experiments uranium was leached with efficiencies 71-100 % by acidic lixiviants. Satisfactory results were obtained for the alkaline leaching process. Almost 100 % of uranium was leached with alkaline carbonate solution. In post leaching solutions only uranium and small amounts of vanadium were present.

  19. Anisotropy and spatial variation of relative permeability and lithologic character of Tensleep Sandstone reservoirs in the Bighorn and Wind River basins, Wyoming. Annual report, September 15, 1993--September 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, T.L.

    1995-07-01

    The principal focus of this project is to evaluate the importance of relative permeability anisotropy with respect to other known geologic and engineering production concepts. This research is to provide improved strategies for enhanced oil recovery from the Tensleep Sandstone oil reservoirs in the Bighorn and Wind River basins, Wyoming. The Tensleep Sandstone contains the largest potential reserves within reservoirs which are candidates for EOR processes in the State of Wyoming. Although this formation has produced billions of barrels of oil, in some fields, as little as one in seven barrels of discovered oil is recoverable by current primary and secondary techniques. Because of the great range of {degree}API gravities of the oils produced from the Tensleep Sandstone reservoirs, the proposed study concentrates on establishing an understanding of the spatial variation and anisotropy of relative permeability within the Tensleep Sandstone. This research is to associate those spatial distributions and anisotropies with the depositional subfacies and zones of diagenetic alteration found within the Tensleep Sandstone. In addition, these studies are being coupled with geochemical modeling and coreflood experiments to investigate the potential for wellbore scaling and formation damage anticipated during EOR processes (e.g., C0{sub 2} flooding). This multidisciplinary project will provide a regional basis for EOR strategies which can be clearly mapped and efficiently applied to the largest potential target reservoir in the State of Wyoming. Additionally, the results of this study have application to all eolian reservoirs through the correlations of relative permeability variation and anisotropy with eolian depositional lithofacies.

  20. The Creep Properties of Fine Sandstone under Uniaxial Tensile Stress

    Directory of Open Access Journals (Sweden)

    Jiang Haifei

    2015-09-01

    Full Text Available A graduated uniaxial direct tensile creep test for fine sandstone is conducted by adopting a custom-designed direct tensile test device for rock. The experiment shows that the tensile creep of fine sandstone has similar creep curve patterns to those of compression creep, while the ratios of the creep strain to the total strain obtained in the tensile tests are substantially higher than those obtained for similar compression tests, which indicates that the creep ability of rock in the tensile process is higher than that in the uniaxial compression process. Based on the elastic modulus in the approximately linear portion of the obtained isochronous stress-strain curves of the tensile creep, the time dependence of the elasticity modulus for the Kelvin model is evaluated, and a revised generalized Kelvin model is obtained by substitution into the generalized Kelvin model. A new viscousplastic model is proposed to describe the accelerated creep properties, and this model is combined in series with the revised generalized Kelvin model to form a new nonlinear viscoelastic-plastic creep model that can describe the properties of attenuation creep, steady creep, and accelerated creep. Comparison of the test and theoretical curves demonstrates that they are nearly identical, which verifies the performance of the model.

  1. Measuring the zeta potential. The relationships with sandstone fineness

    Directory of Open Access Journals (Sweden)

    de Luxán, M. P.

    1989-09-01

    Full Text Available The application of the zeta potential technique in the area of construction materials and Portland cement is quite recent. The initial research work involved the study of cement suspensions or suspensions of one of the components of cement, such as alite, tricalcium alumínate, in the presence of additives and, more specifically, superplasticizers. The studies of this sort were extended with the mixing of active additions into cement (fly ashes, etc.. The present study discusses the application of siliceous materials (sandstone as a basis of the research into the behaviour of sandstone mortars containing repair products.

    La aplicación de la técnica del potencial zeta en el campo de los materiales de construcción y del cemento portland es muy reciente. Las primeras investigaciones se refieren al estudio de suspensiones de cemento o de alguno de sus compuestos que lo forman como alita, aluminato tricálcico, en presencia de aditivos y, más concretamente, de superfluidificantes. Con la incorporación de adiciones activas al cemento (cenizas volantes,... se amplían los estudios de este tipo de cementos. En este trabajo se considera la aplicación a los materiales silíceos (arenisca como base para la investigación del comportamiento de los morteros de arenisca conteniendo productos de reparación.

  2. Sandstone caves on Venezuelan tepuis: Return to pseudokarst?

    Science.gov (United States)

    Aubrecht, R.; Lánczos, T.; Gregor, M.; Schlögl, J.; Šmída, B.; Liščák, P.; Brewer-Carías, Ch.; Vlček, L.

    2011-09-01

    Venezuelan table mountains (tepuis) host the largest arenite caves in the world. The most frequently used explanation of their origin so far was the "arenization" theory, involving dissolution of quartz cement around the sand grains and subsequent removing of the released grains by water. New research in the two largest arenite cave systems - Churi-Tepui System in Chimanta Massif and Ojos de Cristal System in Roraima Tepui showed that quartz dissolution plays only a minor role in their speleogenesis. Arenites forming the tepuis are not only quartzites but they display a wide range of lithification and breakdown, including also loose sands and sandstones. Speleogenetic processes are mostly concentrated on the beds of unlithified sands which escaped from diagenesis by being sealed by the surrounding perfectly lithified quartzites. Only the so-called "finger-flow" pillars testify to confined diagenetic fluids which flowed in narrow channels, leaving the surrounding arenite uncemented. Another factor which influenced the cave-forming processes by about 30% was lateritization. It affects beds formed of arkosic sandstones and greywackes which show strong dissolution of micas, feldspars and clay minerals, turning then to laterite ("Barro Rojo"). The main prerequisite to rank caves among karst phenomena is dissolution. As the dissolution of silicate minerals other than quartz appears to play not only a volumetrically important role but even a trigger role, these arenitic caves may be ranked as karst.

  3. Testing alternative tectonic models of Palaeotethys in the E Mediterranean region: new U-Pb and Lu-Hf isotopic analyses of detrital zircons from Late Carboniferous and Late Triassic sandstones associated with the Anatolide and Tauride blocks (S Turkey)

    Science.gov (United States)

    Ustaömer, Timur; Ayda Ustaömer, Petek; Robertson, Alastair; Gerdes, Axel

    2016-04-01

    addition to Cambro-Ordovician zircons, the Karaburun mélange sandstone includes a prominent Devonian zircon population. The Devonian zircon populations differ significantly from those of Devonian igneous rocks from the Sakarya continent (Pontides) (eHf(t) values from -9 to -4), in terms of Hf isotope signatures (eHf(t) values from -2.1 to +5.4; 65% of which is positive) (Ustaömer et al. 2015). The relatively autochthonous Late Triassic sandstones exhibit similar Precambrian zircon populations to those of the Late Carboniferous sandstones. However, Palaeozoic and Early Mesozoic zircons are relatively more abundant (ranging from 14 to 33%) in the Triassic sediments. Triassic zircons (n=3) only occur in one of sample from the Kasımlar Formation. Palaeozoic zircons are dominated by Cambrian and Ordovician zircons. Devonian and Carboniferous zircon populations are evident in the Güvercinlik Formation sandstone (Karaburun Peninsula). The new isotopic data do not support derivation of any of the sandstones from Eurasian units (i.e. Pontides) to the north, neither do they support simple derivation of all the sandstones from Gondwana (North Africa) to the south. Instead, the presence of only limited amounts of Carboniferous zircons in some of the Late Triassic sandstones (i.e. Karaburun Peninsula) can be explained by derivation of detritus from Cadomian terranes, of the Variscan belt to the west. Ustaömer T, Ustaömer PA, Robertson AHF, Gerdes A (2015), International Journal of Earth Sciences, DOI 10.1007/s00531-015-1225-8. This work was supported by TUBITAK, Project no 111R015

  4. Sandstone-body and shale-body dimensions in a braided fluvial system: Salt wash sandstone member (Morrison formation), Garfield County, Utah

    Science.gov (United States)

    Robinson, J.W.; McCabea, P.J.

    1997-01-01

    Excellent three-dimensional exposures of the Upper Jurassic Salt Wash Sandstone Member of the Morrison Formation in the Henry Mountains area of southern Utah allow measurement of the thickness and width of fluvial sandstone and shale bodies from extensive photomosaics. The Salt Wash Sandstone Member is composed of fluvial channel fill, abandoned channel fill, and overbank/flood-plain strata that were deposited on a broad alluvial plain of low-sinuosity, sandy, braided streams flowing northeast. A hierarchy of sandstone and shale bodies in the Salt Wash Sandstone Member includes, in ascending order, trough cross-bedding, fining-upward units/mudstone intraclast conglomerates, singlestory sandstone bodies/basal conglomerate, abandoned channel fill, multistory sandstone bodies, and overbank/flood-plain heterolithic strata. Trough cross-beds have an average width:thickness ratio (W:T) of 8.5:1 in the lower interval of the Salt Wash Sandstone Member and 10.4:1 in the upper interval. Fining-upward units are 0.5-3.0 m thick and 3-11 m wide. Single-story sandstone bodies in the upper interval are wider and thicker than their counterparts in the lower interval, based on average W:T, linear regression analysis, and cumulative relative frequency graphs. Multistory sandstone bodies are composed of two to eight stories, range up to 30 m thick and over 1500 m wide (W:T > 50:1), and are also larger in the upper interval. Heterolithic units between sandstone bodies include abandoned channel fill (W:T = 33:1) and overbank/flood-plain deposits (W:T = 70:1). Understanding W:T ratios from the component parts of an ancient, sandy, braided stream deposit can be applied in several ways to similar strata in other basins; for example, to (1) determine the width of a unit when only the thickness is known, (2) create correlation guidelines and maximum correlation lengths, (3) aid in interpreting the controls on fluvial architecture, and (4) place additional constraints on input variables to

  5. Different effects of temperature and salinity on permeability reduction by fines migration in Berea sandstone

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Kjøller, Claus; Riis, Jacob Fabricius

    2015-01-01

    Hot water injection into geothermal aquifers is considered in order to store energy seasonally. Berea sandstone is often used as a reference formation to study mechanisms that affect permeability in reservoir sandstones. Both heating of the pore fluid and reduction of the pore fluid salinity can...

  6. Tensile and compressive failure of 3D printed and natural sandstones

    Science.gov (United States)

    Vogler, D.; Perras, M.; Walsh, S. D. C.; Dombrovski, E.

    2016-12-01

    Artificial 3D-printed sandstone samples have the potential to replicate the physical characteristics of natural sandstones, allowing the creation of reproducible rock specimens. If successful, such materials could be used to replicate heterogeneous specimens for destructive testing in a number of different configurations and across different test types. In this study, we consider to what degree such artificial samples can match the tensile and compressive failure behavior of natural sandstones. Specifically, 3D printed sandstone samples were subjected to both indirect Brazilian and unconfined compression tests. Two different types of 3D printed and three natural sandstones were tested, comparing their 1) tensile and compressive strength; 2) strain path to failure; 3) failure mode; and 4) fracture geometry after failure. The artificial sandstone samples demonstrated tensile strengths and failure modes similar to those exhibited in weak natural sandstones. Moreover, the ratio of tensile to compressive strength was found to be similar across all materials tested including the 3D printed materials. Finally, the small-scale fracture surface roughness is comparable between artificial and natural specimens of similar tensile strength - suggesting similar grain- and macro-scale failure behavior between the 3D printed and natural sandstone samples.

  7. On the origin and glacial transport of erratics of Jotnian sandstone in southwestern Finland

    Directory of Open Access Journals (Sweden)

    Donner, J.

    1996-12-01

    Full Text Available Late Proterozoic Jotnian sandstone erratics were transported during the last Quaternary glaciation from the source area in Satakunta at the coast of southwestern Finland and the bottom of the Bothnian Sea to the southeast as far as Estonia, Latvia and Russia. The frequencies of the sandstone erratics show that they were transported greater distances than indicators of other rocks in the southern parts of Finland. In addition, high frequencies in small areas, south of Salo and in Bromarv, indicate that there are or were small separate source areas of Jotnian sandstone outside the main area. This is supported by the distribution of erratics of Cambrian sandstone and Ordovician sedimentary rocks in the same area. The tracing of possible small occurrences of Jotnian sandstone or Palaeozoic rocks is, however, difficult in an area with numerous faults and fracture zones in the Precambrian bedrock, where the depressions are covered by thick Quaternary drift.

  8. The Upper Cretaceous Ostravice Sandstone in the Polish sector of the Silesian Nappe, Outer Western Carpathians

    Directory of Open Access Journals (Sweden)

    Cieszkowski Marek

    2016-04-01

    Full Text Available The Ostravice Sandstone Member was identified and described as a lithostratigraphic unit in the Polish part of the Outer Carpathians. This division occurs in the lowermost part of the Godula Formation, is underlain by variegated deposits of the Mazák Formation or directly by the Barnasiówka and Lhoty formations, and overlain by the Czernichów Member of the Godula Formation. Domination by thick- and very thick-bedded sandstones, conglomeratic sandstones and conglomerates rich in calcareous clasts, mostly of the Štramberk-type limestones, is typical for the Ostravice Sandstone Member. These deposits are widespread between the Moravskoslezské Beskydy Mountains in the Czech Republic and the Ciężkowice Foothills in Poland. The documentation of the Ostravice Sandstone Member occurrence as well as the petrological, sedimentological features, and inventory of the carbonate clasts are presented here.

  9. Identification of sandstone core damage using scanning electron microscopy

    Science.gov (United States)

    Ismail, Abdul Razak; Jaafar, Mohd Zaidi; Sulaiman, Wan Rosli Wan; Ismail, Issham; Shiunn, Ng Yinn

    2017-12-01

    Particles and fluids invasion into the pore spaces causes serious damage to the formation, resulting reduction in petroleum production. In order to prevent permeability damage for a well effectively, the damage mechanisms should be identified. In this study, water-based drilling fluid was compared to oil-based drilling fluids based on microscopic observation. The cores were damaged by several drilling fluid systems. Scanning electron microscope (SEM) was used to observe the damage mechanism caused by the drilling fluids. Results showed that the ester based drilling fluid system caused the most serious damage followed by synthetic oil based system and KCI-polymer system. Fine solids and filtrate migration and emulsion blockage are believed to be the major mechanisms controlling the changes in flow properties for the sandstone samples.

  10. The fracture strength and frictional strength of Weber Sandstone

    Science.gov (United States)

    Byerlee, J.D.

    1975-01-01

    The fracture strength and frictional strength of Weber Sandstone have been measured as a function of confining pressure and pore pressure. Both the fracture strength and the frictional strength obey the law of effective stress, that is, the strength is determined not by the confining pressure alone but by the difference between the confining pressure and the pore pressure. The fracture strength of the rock varies by as much as 20 per cent depending on the cement between the grains, but the frictional strength is independent of lithology. Over the range 0 2 kb, ??=0??5 + 0??6??n. This relationship also holds for other rocks such as gabbro, dunite, serpentinite, granite and limestone. ?? 1975.

  11. Biological transformation of phenols in a sandstone aquifer

    DEFF Research Database (Denmark)

    Broholm, M.; Arvin, E.

    1997-01-01

    Ammonia liquor with very high concentrations of phenols is known to have leaked into the subsurface at a former coal carbonization plant in the UK. High concentrations of ammonium has been encountered in the groundwater reservoir at the site. In spite of this no significant concentrations...... of phenols are found in the groundwater. In this study the potential for transformation of the phenols in the sandstone aquifer at the site under aerobic, nitrate enriched and ''unaltered'' (limited nitrate available, ironoxides and sulphate available) is investigated in laboratory microcosms. Preliminary...... results reveal complete transformation of phenol, cresols and 3,4-xylenol under all 3 conditions and of 2,5-xylenol under aerobic conditions and 3,5-xylenol under anoxic conditions. The potential for natural attenuation of the phenols in this aquifer appear very promising....

  12. Azimuthal AVO signatures of fractured poroelastic sandstone layers

    Science.gov (United States)

    Guo, Zhiqi; Li, Xiang-Yang

    2017-10-01

    Azimuthal P-wave amplitude variation with offset (AVO) offers a method for the characterisation of a naturally fractured system in a reservoir. This information is important for the analysis of fluid flow during production of, for example, oil, petroleum and natural gas. This paper provides a modelling scheme by incorporating the squirt-flow model for the prediction of velocity dispersion and attenuation with azimuthal reflectivity method for the calculation of frequency-dependent seismic responses. Azimuthal AVO responses from a fractured poroelastic sandstone layer encased within shale are investigated based on the proposed method. Azimuthal reflections are a combination of the dynamic information including the contrast in anisotropic properties, anisotropic propagation and attenuation within the layer, as well as tuning and interferences. Modelling results indicate that seismic responses from the top of the sandstone layer are dominated by reflection coefficients, and show azimuthal variations at far offset which is consistent with conventional azimuthal AVO theory. Reflections from the base, however, demonstrate complex azimuthal variations due to anisotropic propagation and attenuation of transmission waves within the layer. Tuning and interferences further complicate the azimuthal AVO responses for thinner layer thickness. The AVO responses of top reflections show no azimuthal variations for lower fluid mobility, while those of base reflections show visible and stable azimuthal variations even at near and moderate offsets for different fluid mobility. Results also reveal that it would be practical to investigate wavetrains reflected from the fractured layers that are regarded as integrated units, especially for thinner layers where reflections from the top and base are indistinguishable. In addition, near-offset stacked amplitudes of the reflected wavetrains show detectable azimuthal variations, which may offer an initial look at fracture orientations before

  13. Downslope coarsening in aeolian grainflows of the Navajo Sandstone

    Science.gov (United States)

    Loope, David B.; Elder, James F.; Sweeney, Mark R.

    2012-07-01

    Downslope coarsening in grainflows has been observed on present-day dunes and generated in labs, but few previous studies have examined vertical sorting in ancient aeolian grainflows. We studied the grainflow strata of the Jurassic Navajo Sandstone in the southern Utah portion of its outcrop belt from Zion National Park (west) to Coyote Buttes and The Dive (east). At each study site, thick sets of grainflow-dominated cross-strata that were deposited by large transverse dunes comprise the bulk of the Navajo Sandstone. We studied three stratigraphic columns, one per site, composed almost exclusively of aeolian cross-strata. For each column, samples were obtained from one grainflow stratum in each consecutive set of the column, for a total of 139 samples from thirty-two sets of cross-strata. To investigate grading perpendicular to bedding within individual grainflows, we collected fourteen samples from four superimposed grainflow strata at The Dive. Samples were analyzed with a Malvern Mastersizer 2000 laser diffraction particle analyser. The median grain size of grainflow samples ranges from fine sand (164 μm) to coarse sand (617 μm). Using Folk and Ward criteria, samples are well-sorted to moderately-well-sorted. All but one of the twenty-eight sets showed at least slight downslope coarsening, but in general, downslope coarsening was not as well-developed or as consistent as that reported in laboratory subaqueous grainflows. Because coarse sand should be quickly sequestered within preserved cross-strata when bedforms climb, grain-size studies may help to test hypotheses for the stacking of sets of cross-strata.

  14. Crater morphology in sandstone targets: The MEMIN impact parameter study

    Science.gov (United States)

    Dufresne, Anja; Poelchau, Michael H.; Kenkmann, Thomas; Deutsch, Alex; Hoerth, Tobias; SchńFer, Frank; Thoma, Klaus

    2013-01-01

    Hypervelocity (2.5-7.8 km s-1) impact experiments into sandstone were carried out to investigate the influence of projectile velocity and mass, target pore space saturation, target-projectile density contrast, and target layer orientation on crater size and shape. Crater size increases with increasing projectile velocity and mass as well as with increasing target pore space saturation. Craters in water-saturated porous targets are generally shallower and larger in volume and in diameter than craters from equivalent impacts into dry porous sandstone. Morphometric analyses of the resultant craters, 5-40 cm in diameter, reveal features that are characteristic of all of our experimental craters regardless of impact conditions (I) a large central depression within a fragile, light-colored central part, and (II) an outer spallation zone with areas of incipient spallation. Two different mechanical processes, grain fragmentation and intergranular tensile fracturing, are recorded within these crater morphologies. Zone (I) approximates the shape of the transient crater formed by material compression, displacement, comminution, and excavation flow, whereas (II) is the result of intergranular tensile fracturing and spallation. The transient crater dimensions are reconstructed by fitting quadric parabolas to crater profiles from digital elevation models. The dimensions of this transient and of the final crater show the same trends: both increase in volume with increasing impact energy, and with increasing water saturation of the target pore space. The relative size of the transient crater (in percent of the final crater volume) decreases with increasing projectile mass and velocity, signifying a greater contribution of spallation on the final crater size when projectile mass and velocity are increased.

  15. Capillary trapping quantification in sandstones using NMR relaxometry

    Science.gov (United States)

    Connolly, Paul R. J.; Vogt, Sarah J.; Iglauer, Stefan; May, Eric F.; Johns, Michael L.

    2017-09-01

    Capillary trapping of a non-wetting phase arising from two-phase immiscible flow in sedimentary rocks is critical to many geoscience scenarios, including oil and gas recovery, aquifer recharge and, with increasing interest, carbon sequestration. Here we demonstrate the successful use of low field 1H Nuclear Magnetic Resonance [NMR] to quantify capillary trapping; specifically we use transverse relaxation time [T2] time measurements to measure both residual water [wetting phase] content and the surface-to-volume ratio distribution (which is proportional to pore size] of the void space occupied by this residual water. Critically we systematically confirm this relationship between T2 and pore size by quantifying inter-pore magnetic field gradients due to magnetic susceptibility contrast, and demonstrate that our measurements at all water saturations are unaffected. Diffusion in such field gradients can potentially severely distort the T2-pore size relationship, rendering it unusable. Measurements are performed for nitrogen injection into a range of water-saturated sandstone plugs at reservoir conditions. Consistent with a water-wet system, water was preferentially displaced from larger pores while relatively little change was observed in the water occupying smaller pore spaces. The impact of cyclic wetting/non-wetting fluid injection was explored and indicated that such a regime increased non-wetting trapping efficiency by the sequential occupation of the most available larger pores by nitrogen. Finally the replacement of nitrogen by CO2 was considered; this revealed that dissolution of paramagnetic minerals from the sandstone caused by its exposure to carbonic acid reduced the in situ bulk fluid T2 relaxation time on a timescale comparable to our core flooding experiments. The implications of this for the T2-pore size relationship are discussed.

  16. Analysis of Critical Permeabilty, Capillary Pressure and Electrical Properties for Mesaverde Tight Gas Sandstones from Western U.S. Basins

    Energy Technology Data Exchange (ETDEWEB)

    Alan Byrnes; Robert Cluff; John Webb; John Victorine; Ken Stalder; Daniel Osburn; Andrew Knoderer; Owen Metheny; Troy Hommertzheim; Joshua Byrnes; Daniel Krygowski; Stefani Whittaker

    2008-06-30

    Although prediction of future natural gas supply is complicated by uncertainty in such variables as demand, liquefied natural gas supply price and availability, coalbed methane and gas shale development rate, and pipeline availability, all U.S. Energy Information Administration gas supply estimates to date have predicted that Unconventional gas sources will be the dominant source of U.S. natural gas supply for at least the next two decades (Fig. 1.1; the period of estimation). Among the Unconventional gas supply sources, Tight Gas Sandstones (TGS) will represent 50-70% of the Unconventional gas supply in this time period (Fig. 1.2). Rocky Mountain TGS are estimated to be approximately 70% of the total TGS resource base (USEIA, 2005) and the Mesaverde Group (Mesaverde) sandstones represent the principal gas productive sandstone unit in the largest Western U.S. TGS basins including the basins that are the focus of this study (Washakie, Uinta, Piceance, northern Greater Green River, Wind River, Powder River). Industry assessment of the regional gas resource, projection of future gas supply, and exploration programs require an understanding of reservoir properties and accurate tools for formation evaluation. The goal of this study is to provide petrophysical formation evaluation tools related to relative permeability, capillary pressure, electrical properties and algorithms for wireline log analysis. Detailed and accurate moveable gas-in-place resource assessment is most critical in marginal gas plays and there is need for quantitative tools for definition of limits on gas producibility due to technology and rock physics and for defining water saturation. The results of this study address fundamental questions concerning: (1) gas storage; (2) gas flow; (3) capillary pressure; (4) electrical properties; (5) facies and upscaling issues; (6) wireline log interpretation algorithms; and (7) providing a web-accessible database of advanced rock properties. The following text

  17. Utilization of the St. Peter Sandstone in the Illinois Basin for CO2 Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Will, Robert; Smith, Valerie; Leetaru, Hannes

    2014-09-30

    This project is part of a larger project co-funded by the United States Department of Energy (US DOE) under cooperative agreement DE-FE0002068 from 12/08/2009 through 9/31/2014. The study is to evaluate the potential of formations within the Cambro-Ordovician strata above the Mt. Simon Sandstone as potential targets for carbon dioxide (CO2) sequestration in the Illinois and Michigan Basins. This report evaluates the potential injectivity of the Ordovician St. Peter Sandstone. The evaluation of this formation was accomplished using wireline data, core data, pressure data, and seismic data acquired through funding in this project as well as existing data from two additional, separately funded projects: the US DOE funded Illinois Basin – Decatur Project (IBDP) being conducted by the Midwest Geological Sequestration Consortium (MGSC) in Macon County, Illinois, and the Illinois Industrial Carbon Capture and Sequestration (ICCS) Project funded through the American Recovery and Reinvestment Act (ARRA), which received a phase two award from DOE. This study addresses the question of whether or not the St. Peter Sandstone may serve as a suitable target for CO2 sequestration at locations within the Illinois Basin where it lies at greater depths (below the underground source of drinking water (USDW)) than at the IBDP site. The work performed included numerous improvements to the existing St. Peter reservoir model created in 2010. Model size and spatial resolution were increased resulting in a 3 fold increase in the number of model cells. Seismic data was utilized to inform spatial porosity distribution and an extensive core database was used to develop porosity-permeability relationships. The analysis involved a Base Model representative of the St. Peter at “in-situ” conditions, followed by the creation of two hypothetical models at in-situ + 1,000 feet (ft.) (300 m) and in-situ + 2,000 ft. (600 m) depths through systematic depthdependent adjustment of the Base Model

  18. Sedimentary structural element analysis, continuity and permeability of Mesaverde sandstones from the Rifle Gap Area, Colorado. Phase VI report

    Energy Technology Data Exchange (ETDEWEB)

    Hodges, L.T.; Knutson, C.F.; Righter, S.B.

    1981-09-01

    This field study on sandstone outcrops on the rim of the Piceance Basin had as its prime goals (1) an evaluation of the geometrical properties of the sandstone lenses in the Mesaverde Group, including their length, thickness, continuity, paleocurrent orientations, and crossbed characteristics, and (2) a prognosis of sandstone geometries and orientations at the multiwell site based on the outcrop analysis.

  19. Reservoir assessment of the Nubian sandstone reservoir in South Central Gulf of Suez, Egypt

    Science.gov (United States)

    El-Gendy, Nader; Barakat, Moataz; Abdallah, Hamed

    2017-05-01

    The Gulf of Suez is considered as one of the most important petroleum provinces in Egypt and contains the Saqqara and Edfu oil fields located in the South Central portion of the Gulf of Suez. The Nubian sandstone reservoir in the Gulf of Suez basin is well known for its great capability to store and produce large volumes of hydrocarbons. The Nubian sandstone overlies basement rocks throughout most of the Gulf of Suez region. It consists of a sequence of sandstones and shales of Paleozoic to Cretaceous age. The Nubian sandstone intersected in most wells has excellent reservoir characteristics. Its porosity is controlled by sedimentation style and diagenesis. The cementation materials are mainly kaolinite and quartz overgrowths. The permeability of the Nubian sandstone is mainly controlled by grain size, sorting, porosity and clay content especially kaolinite and decreases with increase of kaolinite. The permeability of the Nubian Sandstone is evaluated using the Nuclear Magnetic Resonance (NMR technology) and formation pressure data in addition to the conventional logs and the results were calibrated using core data. In this work, the Nubian sandstone was investigated and evaluated using complete suites of conventional and advanced logging techniques to understand its reservoir characteristics which have impact on economics of oil recovery. The Nubian reservoir has a complicated wettability nature which affects the petrophysical evaluation and reservoir productivity. So, understanding the reservoir wettability is very important for managing well performance, productivity and oil recovery.

  20. {sup 57}Fe Moessbauer and X-ray characterisation of sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Mulaba-Bafubiandi, A. F. [University of Johannesburg, Mineral Processing and Technology Research Centre, Department of Metallurgy, School of Mining, Metallurgy and Chemical Engineering, Faculty of Engineering and The Built Environment (South Africa); Waanders, F. B., E-mail: frans.waanders@nwu.ac.za [North West University, School of Chemical and Minerals Engineering (South Africa)

    2013-04-15

    Sandstones from the Free State province in South Africa have been mined and processed mainly by small scale and artisanal miners in the rural areas. In the present investigation basic fire proof and water absorption tests, X-ray and {gamma}-ray based characterisation techniques were used to study the sandstones. The collected samples were grouped according to their apparent colour in day light conditions and the elemental analysis showed the presence of a high amount of oxygen (>52%) and silicon (>38%) with Mn, Al, Fe and Ca as major elements in proportions related to the colour distribution of the various sandstones. The uniaxial compressive stress was found to be the highest (56 MPa) for the greyish sandstone and the lowest (8 MPa) for the white sandstone sample, also associated with the lowest (Al+Fe)/Si value of 0.082. The humidity test showed that the 6 % water absorption was lower than the recommended ASTM value of 8 %. The sandstone samples were also subjected to various high temperatures to simulate possible fire conditions and it was found that the non alteration of the mineral species might be one of the reasons why the sandstones are regarded as the most refractory amongst the building materials typically used. Moessbauer spectroscopy revealed that iron is present in all the sandstones, mainly as Fe{sup 3 + } with the black sandstone showing an additional presence of 3 % Fe{sup 2 + } indicating that a higher iron content coupled to higher silicon content, contributes to an increase in the uniaxial compressive strength.

  1. Fracturing and Damage to Sandstone Under Coupling Effects of Chemical Corrosion and Freeze-Thaw Cycles

    Science.gov (United States)

    Han, Tielin; Shi, Junping; Cao, Xiaoshan

    2016-11-01

    Rapid freeze-thaw (FT) cycles were adopted to explore the damage deterioration mechanism and mechanical properties of sandstone specimens under the coupling effects of different chemical solutions and FT cycles. The variation regularities of the FT cycles and physical and mechanical properties of sandstone specimens immersed in different chemical solutions were analyzed by using sandstone sampled from a Chinese riverbank slope. The damage variable based on porosity variation was used in the quantitative analysis of the damage to the sandstone under the coupling effects of chemical corrosion and FT cycles. Experimental results showed that the sandstone specimens weakened substantially under those effects. Their fracture toughness K IC, splitting tensile strength, and compressive strength showed a similar deteriorating trend with various numbers of FT cycles. However, a difference exists in the deterioration degree of their mechanical parameters, i.e., the deterioration degree of their fracture toughness K IC is the greatest followed by that of splitting tensile strength, and that of compressive strength is relatively small. Strong acid solutions may aggravate the deterioration of FT damage in sandstones, but at the early stage of the experiment, strong alkaline solutions inhibited sandstone damage deterioration. However, the inhibiting effect disappeared when the number of FT cycles exceeded 25. The different chemical solutions had a different effect on the FT damage degree of the sandstone specimens; for example, SO4 2- ions had a greater effect on FT damage than did HCO3 - ions. Water-chemical solutions and FT cycles promote each other in deteriorating rocks and simultaneously affect the damage deterioration degree of sandstones.

  2. Composition, provenance and source weathering of Mesozoic sandstones from Western-Central Mediterranean Alpine Chains

    Science.gov (United States)

    Perri, F.

    2014-03-01

    Forty-two Mesozoic sandstone samples from three different sedimentary successions of the Internal Domains along the Western-Central Mediterranean Alpine Chains (Betic Cordillera, Rif Chain and Calabria-Peloritani Arc) were chemically analyzed to characterize their composition and the degree of weathering in the source area(s). The Rif Chain sandstones have SiO2 contents higher than those of the Calabria-Peloritani Arc and Betic Cordillera sandstones, whereas Al2O3 contents are higher in the Calabria-Peloritani Arc sandstones rather than in the Rif Chain and Betic Cordillera sandstones. The indices of compositional variability (ICV) of the studied samples are generally less than 1, suggesting that the samples are compositionally mature and were likely dominated by recycling. Recycling processes are also shown by the Al-Zr-Ti diagram indicating zircon addition and, thus, recycling processes. The Chemical Index of Alteration (CIA) values are quite homogeneous for the Calabria-Peloritani Arc (mean = 76) and Betic Cordillera sandstones (mean = 55), whereas the Rif Chain sandstones are characterized by CIA values ranging from 54 to 76. The CIW and PIA values are high for all the studied sandstones indicating intense weathering at the source areas. The different values of weathering rates among the studied sandstones may be related to variations of paleoclimatic conditions during the Mesozoic, that further favored recycling processes. Thus, these differences among the studied samples, may be related to an increase in continental palaeoweathering conditions and sediment recycling effects from the Middle Triassic to the earliest Jurassic due to rising humidity. In addition, regional tectonic movements promoted structural changes that allowed sedimentary recycling and subsidence, which in turn caused diagenetic K-metasomatism. These processes could significantly affect the CIW and PIA weathering indices, which likely monitor a cumulative effect, including several cycles of

  3. Facies architecture of the Bluejacket Sandstone in the Eufaula Lake area, Oklahoma: Implications for the reservoir characterization of the Bartlesville Sandstone

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Liangmiao; Yang, Kexian [Univ. of Tulsa, OK (United States)

    1997-08-01

    Outcrop studies of the Bluejacket Sandstone (Middle Pennsylvanian) provide significant insights to reservoir architecture of the subsurface equivalent Bartlesville Sandstone. Quarry walls and road cuts in the Lake Eufaula area offer excellent exposures for detailed facies architectural investigations using high-precision surveying, photo mosaics. Directional minipermeameter measurements are being conducted. Subsurface studies include conventional logs, borehole image log, and core data. Reservoir architectures are reconstructed in four hierarchical levels: multi-storey sandstone, i.e. discrete genetic intervals; individual discrete genetic interval; facies within a discrete genetic interval; and lateral accretion bar deposits. In both outcrop and subsurface, the Bluejacket (Bartlesville) Sandstone comprises two distinctive architectures: a lower braided fluvial and an upper meandering fluvial. Braided fluvial deposits are typically 30 to 80 ft thick, and are laterally persistent filling an incised valley wider than the largest producing fields. The lower contact is irregular with local relief of 50 ft. The braided-fluvial deposits consist of 100-400-ft wide, 5-15-ft thick channel-fill elements. Each channel-fill interval is limited laterally by an erosional contact or overbank deposits, and is separated vertically by discontinuous mudstones or highly concentrated mudstone interclast lag conglomerates. Low-angle parallel-stratified or trough cross-stratified medium- to coarse-grained sandstones volumetrically dominate. This section has a blocky well log profile. Meandering fluvial deposits are typically 100 to 150 ft thick and comprise multiple discrete genetic intervals.

  4. Study on Three Point Bending Features of Sandstone Based on Acoustic Emission

    Science.gov (United States)

    Li, Kexuan; Li, Tie

    2018-01-01

    The three-point bending experiment of sandstone from a coal mine roof under different loading rates based on acoustic emission was carried out. Through analyzing the AE phenomenon, found that the sandstone fracture is brittle fracture. The number of AE counts under low loading speed is more than it under high loading speed, indicated that internal crack is more fully occurred and expanded at low loading speed. The AE energy presents as solitary earthquake type. The flexural strength of sandstone is not high, the failure load and flexural strength increase with the increasing of loading speed, and then decline gradually after reaching the extreme value.

  5. Hydrogeology and simulation of ground-water flow in the Sandstone Aquifer, northeastern Wisconsin

    Science.gov (United States)

    Conlon, T.D.

    1998-01-01

    Municipalities in the lower Fox River Valley in northeastern Wisconsin obtain their water supply from a series of permeable sandstones and carbonates of Cambrian to Ordovician age. Withdrawals from this "sandstone aquifer" have resulted in water levels declining at a rate of more than 2 feet per year. The U.S. Geological Survey, in cooperation with the major water utilities in the Fox Cities area, the East Central Wisconsin Regional Planning Commission and the Wisconsin Geological and Natural History Survey, collected hydrogeological data and constructed a quasithree- dimensional, transient ground-water-flow model for use as a tool in assessing the water resources of the sandstone aquifer.

  6. Two scale analysis applied to low permeability sandstones

    Science.gov (United States)

    Davy, Catherine; Song, Yang; Nguyen Kim, Thang; Adler, Pierre

    2015-04-01

    Low permeability materials are often composed of several pore structures of various scales, which are superposed one to another. It is often impossible to measure and to determine the macroscopic properties in one step. In the low permeability sandstones that we consider, the pore space is essentially made of micro-cracks between grains. These fissures are two dimensional structures, which aperture is roughly on the order of one micron. On the grain scale, i.e., on the scale of 1 mm, the fissures form a network. These two structures can be measured by using two different tools [1]. The density of the fissure networks is estimated by trace measurements on the two dimensional images provided by classical 2D Scanning Electron Microscopy (SEM) with a pixel size of 2.2 micron. The three dimensional geometry of the fissures is measured by X-Ray micro-tomography (micro-CT) in the laboratory, with a voxel size of 0.6x0.6x0.6microns3. The macroscopic permeability is calculated in two steps. On the small scale, the fracture transmissivity is calculated by solving the Stokes equation on several portions of the measured fissures by micro-CT. On the large scale, the density of the fissures is estimated by three different means based on the number of intersections with scanlines, on the surface density of fissures and on the intersections between fissures per unit surface. These three means show that the network is relatively isotropic and they provide very close estimations of the density. Then, a general formula derived from systematic numerical computations [2] is used to derive the macroscopic dimensionless permeability which is proportional to the fracture transmissivity. The combination of the two previous results yields the dimensional macroscopic permeability which is found to be in acceptable agreement with the experimental measurements. Some extensions of these preliminary works will be presented as a tentative conclusion. References [1] Z. Duan, C. A. Davy, F

  7. Geological and petrophysical characterization of the Ferron Sandstone for 3-D simulation of a fluvial-deltaic reservoir. Annual report, October 1, 1995--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Chidsey, T.C. Jr.

    1997-05-01

    The objective of the Ferron Sandstone project is to develop a comprehensive, interdisciplinary, quantitative characterization of a fluvial-deltaic reservoir to allow realistic inter-well and reservoir-scale models to be developed for improved oil-field development in similar reservoirs world-wide. Quantitative geological and petrophysical information on the Cretaceous Ferron Sandstone in east-central Utah was collected. Both new and existing data is being integrated into a three-dimensional model of spatial variations in porosity, storativity, and tensorial rock permeability at a scale appropriate for inter-well to regional-scale reservoir simulation. Simulation results could improve reservoir management through proper infill and extension drilling strategies, reduction of economic risks, increased recovery from existing oil fields, and more reliable reserve calculations. Transfer of the project results to the petroleum industry is an integral component of the project. This report covers research activities for fiscal year 1995-96, the third year of the project. Most work consisted of interpreting the large quantity of data collected over two field seasons. The project is divided into four tasks: (1) regional stratigraphic analysis, (2) case studies, (3) reservoirs models, and (4) field-scale evaluation of exploration strategies. The primary objective of the regional stratigraphic analysis is to provide a more detailed interpretation of the stratigraphy and gross reservoir characteristics of the Ferron Sandstone as exposed in outcrop. The primary objective of the case-studies work is to develop a detailed geological and petrophysical characterization, at well-sweep scale or smaller, of the primary reservoir lithofacies typically found in a fluvial-dominated deltaic reservoir.

  8. Experimental Study on the Effects of Stress Variations on the Permeability of Feldspar-Quartz Sandstone

    Directory of Open Access Journals (Sweden)

    Fugang Wang

    2017-01-01

    Full Text Available The multistage and discontinuous nature of the injection process used in the geological storage of CO2 causes reservoirs to experience repeated loading and unloading. The reservoir permeability changes caused by this phenomenon directly impact the CO2 injection process and the process of CO2 migration in the reservoirs. Through laboratory experiments, variations in the permeability of sandstone in the Liujiagou formation of the Ordos CO2 capture and storage (CCS demonstration project were analyzed using cyclic variations in injection pressure and confining pressure and multistage loading and unloading. The variation in the micropore structure and its influence on the permeability were analyzed based on micropore structure tests. In addition, the effects of multiple stress changes on the permeability of the same type of rock with different clay minerals content were also analyzed. More attention should be devoted to the influence of pressure variations on permeability in evaluations of storage potential and studies of CO2 migration in reservoirs in CCS engineering.

  9. Electrokinetic desalination of sandstones for NaCl removal

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben V.

    2012-01-01

    Salt induced decay is a serious threat to many historic stone and brick buildings and monuments. Further salt decay can be problematic in more recent buildings, as well, causing repeated plaster and paint peeling and increased hygroscopic moisture content. There is a need for development of relia......Salt induced decay is a serious threat to many historic stone and brick buildings and monuments. Further salt decay can be problematic in more recent buildings, as well, causing repeated plaster and paint peeling and increased hygroscopic moisture content. There is a need for development...... of reliable methods to remove the damaging salts in order to stop the decay. Electrokinetic desalination of fired clay bricks have previously shown efficient in laboratory scale and in the present work the method is tested for desalination of Cotta and Posta sandstones, which both have lower porosity than...... the bricks studied. The stones were contaminated with NaCl by submersion prior to the desalination experiments, where an electric DC field was applied to the stones from electrodes placed in clay poultice. Two poultice types were tested: calcareous clay used brick production and a mixture of kaolinite...

  10. Mineral changes in cement-sandstone matrices induced by biocementation

    Energy Technology Data Exchange (ETDEWEB)

    Verba, C. [National Energy Technology Lab. (NETL), Albany, OR (United States); Thurber, A. R. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Alleau, Y. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Koley, D. [Oregon State Univ., Corvallis, OR (United States). College of Science; Colwell, F. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Torres, M. E. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences

    2016-04-01

    Prevention of wellbore CO2 leakage is a critical component of any successful carbon capture, utilization, and storage program. Sporosarcina pasteurii is a bacterium that has demonstrated the potential ability to seal a compromised wellbore through the enzymatic precipitation of CaCO3. In this paper, we investigate the growth of S. pasteurii in a synthetic brine that mimics the Illinois Basin and on Mt. Simon sandstone encased in Class H Portland cement under high pressure and supercritical CO2 (PCO2) conditions. The bacterium grew optimum at 30 °C compared to 40 °C under ambient and high pressure (10 MPa) conditions; and growth was comparable in experiments at high PCO2. Sporosarcina pasteurii actively induced the biomineralization of CaCO3 polymorphs and MgCa(CO3)2 in both ambient and high pressure conditions as observed in electron microscopy. In contrast, abiotic (non-biological) samples exposed to CO2 resulted in the formation of surficial vaterite and calcite. Finally, the ability of S. pasteurii to grow under subsurface conditions may be a promising mechanism to enhance wellbore integrity.

  11. Geological and petrophysical characterization of the ferron sandstone for 3-D simulation of a fluvial-deltaic reservoir. Annual report, October 1, 1994--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chidsey, T.C. Jr.; Allison, M.L.

    1996-05-01

    The objective of the Ferron Sandstone project is to develop a comprehensive, interdisciplinary, quantitative characterization of a fluvial-deltaic reservoir to allow realistic interwell and reservoir-scale models to be developed for improved oil-field development in similar reservoirs world-wide. Quantitative geological and petrophysical information on the Cretaceous Ferron Sandstone in east-central Utah was collected. Both new and existing data is being integrated into a three-dimensional model of spatial variations in porosity, storativity, and tensorial rock permeability at a scale appropriate for inter-well to regional-scale reservoir simulation. Simulation results could improve reservoir management through proper infill and extension drilling strategies, reduction of economic risks, increased recovery from existing oil fields, and more reliable reserve calculations. Transfer of the project results to the petroleum industry is an integral component of the project. This report covers research activities for fiscal year 1994-95, the second year of the project. Most work consisted of developing field methods and collecting large quantities of existing and new data. We also continued to develop preliminary regional and case-study area interpretations. The project is divided into four tasks: (1) regional stratigraphic analysis, (2) case studies, (3) reservoirs models, and (4) field-scale evaluation of exploration strategies.

  12. Compactional deformation bands in Wingate Sandstone; additional evidence of an impact origin for Upheaval Dome, Utah

    Science.gov (United States)

    Okubo, Chris H.; Schultz, Richard A.

    2007-04-01

    Field and microstructural observations from Upheaval Dome, in Canyonlands National Park, Utah, show that inelastic strain of the Wingate Sandstone is localized along compactional deformation bands. These bands are tabular discontinuities (Jurassic) age for this impact.

  13. Local diversity versus geographical distribution of arthropods occuring in a sandstone rock labyrinth

    Czech Academy of Sciences Publication Activity Database

    Růžička, Vlastimil; Mlejnek, R.; Šmilauer, P.

    2010-01-01

    Roč. 58, č. 3 (2010), s. 533-544 ISSN 1505-2249 Institutional research plan: CEZ:AV0Z50070508 Keywords : sandstone * microclimate * paleorefugium Subject RIV: EH - Ecology, Behaviour Impact factor: 0.542, year: 2010

  14. Heavy mineral sorting in downwards injected Palaeocene sandstone, Siri Canyon, Danish North Sea

    DEFF Research Database (Denmark)

    Kazerouni, Afsoon Moatari; Friis, Henrik; Svendsen, Johan Byskov

    2011-01-01

    Post-depositional remobilization and injection of sand are often seen in deep-water clastic systems and has been recently recognised as a significant modifier of deep-water sandstone geometry. Large-scale injectite complexes have been interpreted from borehole data in the Palaeocene Siri Canyon...... of depositional structures in deep-water sandstones, the distinction between "in situ" and injected or remobilised sandstones is often ambiguous. Large scale heavy mineral sorting (in 10 m thick units) is observed in several reservoir units in the Siri Canyon and has been interpreted to represent the depositional...... sorting. In this study we describe an example of effective shear-zone sorting of heavy minerals in a thin downward injected sandstone dyke which was encountered in one of the cores in the Cecilie Field, Siri Canyon. Differences in sorting pattern of heavy minerals are suggested as a tool for petrographic...

  15. Investigating the effect of unloading on artificial sandstone behaviour using the Discrete Element Method

    Directory of Open Access Journals (Sweden)

    Huang Yueqin

    2017-01-01

    Full Text Available The Discrete Element Method (DEM was used to simulate the mechanical behaviour of a reservoir sandstone. Triaxial tests were carried out using 3D-DEM to simulate the stress-strain behaviour of a sandstone with comparisons made between the numerical tests and the laboratory tests. The influence of isotropic unloading was investigated, which was found to have impacts on bond breakages and was successfully captured in the 3D shearing processes. It was found that bond breakages correlated strongly with the stress-strain behaviour of the sandstone affecting the peak strength. It was also found that unloading affected the bond breakages, which then changed the mechanical behaviour of sandstone. The tangent stiffnesses of simulated virgin and cored samples under different confining stresses were compared. From the tangent stiffnesses, gross yield envelopes and the yielding surfaces for unloaded samples and virgin samples were plotted and analysed in detail.

  16. CO2 Storage Potential of the Eocene Tay Sandstone, Central North Sea, UK

    Science.gov (United States)

    Gent, Christopher; Williams, John

    2017-04-01

    Carbon Capture and Storage (CCS) is crucial for low-carbon industry, climate mitigation and a sustainable energy future. The offshore capacity of the UK is substantial and has been estimated at 78 Gt of CO2 in saline aquifers and hydrocarbon fields. The early-mid Eocene Tay Sandstone Member of the Central North Sea (CNS) is a submarine-fan system and potential storage reservoir with a theoretical capacity of 123 Mt of CO2. The Tay Sandstone comprises of 4 sequences, amalgamating into a fan complex 125km long and 40 km at a minimum of 1500 m depth striking NW-SE, hosting several hydrocarbon fields including Gannett A, B, D and Pict. In order to better understand the storage potential and characteristics, the Tay Sandstone over Quadrant 21 has been interpreted using log correlation and 3D seismic. Understanding the internal and external geometry of the sandstone as well as the lateral extent of the unit is essential when considering CO2 vertical and horizontal fluid flow pathways and storage security. 3D seismic mapping of a clear mounded feature has revealed the youngest sequence of the Tay complex; a homogenous sand-rich channel 12 km long, 1.5 km wide and on average 100 m thick. The sandstone has porosity >35%, permeability >5 D and a net to gross of 0.8, giving a total pore volume of 927x106 m3. The remaining three sequences are a series of stacked channels and interbedded mudstones which are more quiescent on the seismic, however, well logs indicate each subsequent sequence reduce in net to gross with age as mud has a greater influence in the early fan system. Nevertheless, the sandstone properties remain relatively consistent and are far more laterally extensive than the youngest sequence. The Tay Sandstone spatially overlaps several other potential storage sites including the older Tertiary sandstones of the Cromarty, Forties and Mey Members and deeper Jurassic reservoirs. This favours the Tay Sandstone to be considered in a secondary or multiple stacked

  17. Middle Ordovician brachiopods from the Stairway Sandstone, Amadeus Basin, central Australia

    DEFF Research Database (Denmark)

    Jakobsen, Kristian Grube; Brock, Glenn A.; Nielsen, Arne Thorshøj

    2014-01-01

    Middle Ordovician brachiopod faunas from the Amadeus Basin, central Australia are poorly known. The Darriwilian Stairway Sandstone was sampled stratigraphically for macrofossils in order to provide new information on marine benthic diversity in this clastic-dominated, shallow-water palaeoenvironm......Middle Ordovician brachiopod faunas from the Amadeus Basin, central Australia are poorly known. The Darriwilian Stairway Sandstone was sampled stratigraphically for macrofossils in order to provide new information on marine benthic diversity in this clastic-dominated, shallow...

  18. Sandstone Provenance of the De Geerdalen Formation, Svalbard - Emphasis on Petrography and Chromium Spinel Compositions

    OpenAIRE

    Harstad, Trond Svånå

    2016-01-01

    Detrital chromium spinel mineral-chemical analyses, in combination with sandstone petrography, were conducted on samples from the Upper Triassic De Geerdalen Formation from several locations on Svalbard, in order to interpret sandstone provenance. Petrographic identification of detrital minerals and lithic fragments was used to identify source rock lithology. The accessory mineral chromium spinel was used as a petrogenetic marker to distinguish tectonic setting of mafic and ultra- mafic sourc...

  19. Analyzing the Sand-fixing Effect of Feldspathic Sandstone from the Texture Characteristics

    Science.gov (United States)

    Zhang, lu; Ban, Jichang

    2018-01-01

    The purpose of this research was aimed to study the sand fixing effect of feldspathic sandstone in Mu Us Sandy Land, to provide a scienticic basis for desertification control, soil and water conservation and development of farming there. Methods of mixing feldspathic sandstone and aeolian sandy soil according to 1: 0, 1: 1, 1: 2, 1: 5, and 0: 1 mass ratioes, the graded composition and characteristics were studied with laser particle size analyzer. The result showed that these features of sand-based, loosely structured, easy to wind erosion of aeolian sandy soil were changed before feldspathic sandstone and aeolian sandy soil compounding. The m(F): m(S) was 1: 5(Cu was 54.71 and Cc was 2.54) or when m(F): m(S) was 1: 2(Cu was 76.21, Cc was 1.12). The conclusion is that feldspathic sandstone has sand-fixing effect in texture characteristics, which heightens with feldspathic sandstone mass increasing, and when the mass ratio of feldspathic sandstone: aeolian sandy soil is 1: 2 or 1: 5 which compound better.

  20. Developing conceptual hydrogeological model for Potsdam sandstones in southwestern Quebec, Canada

    Science.gov (United States)

    Nastev, Miroslav; Morin, R.; Godin, Rejean; Rouleau, Alain

    2008-01-01

    A hydrogeological study was conducted in Potsdam sandstones on the international border between Canada (Quebec) and the USA (New York). Two sandstone formations, arkose and conglomerate (base) and well-cemented quartz arenite (upper), underlie the study area and form the major regional aquifer unit. Glacial till, littoral sand and gravel, and marine silt and clay discontinuously overlie the aquifer. In both sandstone formations, sub-horizontal bedding planes are ubiquitous and display significant hydraulic conductivities that are orders of magnitude more permeable than the intact rock matrix. Aquifer tests demonstrate that the two formations have similar bulk hydrologic properties, with average hydraulic conductivities ranging from 2 ?? 10-5 to 4 ?? 10-5 m/s. However, due to their different lithologic and structural characteristics, these two sandstones impose rather different controls on groundwater flow patterns in the study area. Flow is sustained through two types of fracture networks: sub-horizontal, laterally extensive fractures in the basal sandstone, where hydraulic connectivity is very good horizontally but very poor vertically and each of the water-bearing bedding planes can be considered as a separate planar two-dimensional aquifer unit; and the more fractured and vertically jointed system found in the upper sandstone that promotes a more dispersed, three-dimensional movement of groundwater. ?? Springer-Verlag 2007.

  1. Laminated sandstones reservoir characterization, Middle Eocene Lower Misoa Formation, Ceuta Field, Maracaibo Lake

    Energy Technology Data Exchange (ETDEWEB)

    Chacartegui, F.; Coll, M.C.; Urdaneta, J.; Pinto, J.; Lugo, D. (Maraven S.A., Caracas (Venezuela))

    1993-02-01

    This study presents the results of a multidisciplinary, project and methodology used to describe a clastic reservoir, known as C-2/C-3, characterized by thin sandstones units masked by a mainly argillaceous sequence. The area known as Area 2 of the Ceuta field, is located to the southeast of the Maracaibo Lake, comprising an area of 75 km[sup 2]. Sedimentological facies description, characterization and analysis resulted in the identification of seven different lithofacies, of which only two are productive. Additionally, ten sedimentary units were recognized, based on related facies associations and nature of facies contacts. These sedimentary units were deposited by a prograding, fluvially-dominated delta in a large estuarine environmental setting. Integration of sedimentological and petrophysical data were used to recognize and predict prospective intervals from well logs and to characterize them. A deconvolution of MICRO LOG resistivities proved to be the most successful technique to delineate productive intervals, and set the basis for flow unit identification. Production data, integrated with petrophysical and sedimentological parameters, were used to identify and characterize six flow units from the entire sequence. Log correlations, based on the sedimentological framework and stratigraphic sequence analysis techniques, in addition to 3-D seismic interpretations, were used to establish the external geometry and extension of flow units and thus, delineating the areal and vertical limits of the reservoir. Reservoir application of this project include successfull placing of appraisal wells to the south, grass-root drilling to the north, optimization of workover wells over the entire area and a more realistic reserves quantification.

  2. The influence of clay minerals on acoustic properties of sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Olav

    1997-12-31

    This thesis aims to provide better understanding of the relationship between the acoustic properties and the petrophysical/mineralogical properties in sand-prone rock. It emphasizes the influence of clay minerals. The author develops a method to deposit clay minerals/mineral aggregates in pore space of a rigid rock framework. Kaolinite aggregates were flushed into porous permeable Bentheimer sandstone to evaluate the effect of pore filling minerals on porosity, permeability and acoustic properties. The compressional velocity was hardly affected by the clay content and it was found that the effect of minor quantities of pore filling minerals may be acoustically modelled as an ideal suspension, where the pore fluid bulk modulus is modified by the bulk modulus of the clay minerals. The influence of clays on acoustic velocities in petroleum reservoir rocks was investigated through ultrasonic measurements of compressional- and shear-waves on core material from reservoir and non-reservoir units on the Norwegian Continental Shelf. The measured velocities decrease as the porosity increases, but are not strongly dependent on the clay content. The measured velocities are less dependent on the petrophysical and lithological properties than indicated by previous authors and published mathematical models, and stiffness reduction factors are introduced in two of the models to better match the data. Velocities are estimated along the wellbores based on non-sonic well logs and reflect well the actual sonic log well measurements. In some wells the compressional velocity cannot be modelled correctly by the models suggested. Very high compressional wave anisotropy was measured in the dry samples at atmospheric conditions. As the samples were saturated, the anisotropy was reduced to a maximum of about 30% and decreases further upon pressurization. Reservoir rocks retrieved from 2500 m are more stress dependent than those retrieved from less than 200 m depth. 168 refs., 117 figs., 24

  3. Predicting cement distribution in geothermal sandstone reservoirs based on estimates of precipitation temperatures

    Science.gov (United States)

    Olivarius, Mette; Weibel, Rikke; Whitehouse, Martin; Kristensen, Lars; Hjuler, Morten L.; Mathiesen, Anders; Boyce, Adrian J.; Nielsen, Lars H.

    2016-04-01

    Exploitation of geothermal sandstone reservoirs is challenged by pore-cementing minerals since they reduce the fluid flow through the sandstones. Geothermal exploration aims at finding sandstone bodies located at depths that are adequate for sufficiently warm water to be extracted, but without being too cemented for warm water production. The amount of cement is highly variable in the Danish geothermal reservoirs which mainly comprise the Bunter Sandstone, Skagerrak and Gassum formations. The present study involves bulk and in situ stable isotope analyses of calcite, dolomite, ankerite, siderite and quartz in order to estimate at what depth they were formed and enable prediction of where they can be found. The δ18O values measured in the carbonate minerals and quartz overgrowths are related to depth since they are a result of the temperatures of the pore fluid. Thus the values indicate the precipitation temperatures and they fit the relative diagenetic timing identified by petrographical observations. The sandstones deposited during arid climatic conditions contain calcite and dolomite cement that formed during early diagenesis. These carbonate minerals precipitated as a response to different processes, and precipitation of macro-quartz took over at deeper burial. Siderite was the first carbonate mineral that formed in the sandstones that were deposited in a humid climate. Calcite began precipitating at increased burial depth and ankerite formed during deep burial and replaced some of the other phases. Ankerite and quartz formed in the same temperature interval so constrains on the isotopic composition of the pore fluid can be achieved. Differences in δ13C values exist between the sandstones that were deposited in arid versus humid environments, which suggest that different kinds of processes were active. The estimated precipitation temperatures of the different cement types are used to predict which of them are present in geothermal sandstone reservoirs in

  4. ANALYSIS OF OIL-BEARING CRETACEOUS SANDSTONE HYDROCARBON RESERVOIRS, EXCLUSIVE OF THE DAKOTA SANDSTONE, ON THE JICARILLA APACHE INDIAN RESERVATION, NEW MEXICO

    Energy Technology Data Exchange (ETDEWEB)

    Jennie Ridgley

    2000-01-21

    An additional 450 wells were added to the structural database; there are now 2550 wells in the database with corrected tops on the Juana Lopez, base of the Bridge Creek Limestone, and datum. This completes the structural data base compilation. Fifteen oil and five gas fields from the Mancos-ElVado interval were evaluated with respect to the newly defined sequence stratigraphic model for this interval. The five gas fields are located away from the structural margins of the deep part of the San Juan Basin. All the fields have characteristics of basin-centered gas and can be considered as continuous gas accumulations as recently defined by the U.S. Geological Survey. Oil production occurs in thinly interbedded sandstone and shale or in discrete sandstone bodies. Production is both from transgressive and regressive strata as redefined in this study. Oil production is both stratigraphically and structurally controlled with production occurring along the Chaco slope or in steeply west-dipping rocks along the east margin of the basin. The ElVado Sandstone of subsurface usage is redefined to encompass a narrower interval; it appears to be more time correlative with the Dalton Sandstone. Thus, it was deposited as part of a regressive sequence, in contrast to the underlying rock units which were deposited during transgression.

  5. Revitalizing a mature oil play: Strategies for finding and producing unrecovered oil in frio fluvial-deltaic sandstone reservoirs at South Texas. Annual report, October 1994--October 1995

    Energy Technology Data Exchange (ETDEWEB)

    Holtz, M.; Knox, P.; McRae, L. [and others

    1996-02-01

    The Frio Fluvial-Deltaic Sandstone oil play of South Texas has produced nearly 1 billion barrels of oil, yet it still contains about 1.6 billion barrels of unrecovered mobile oil and nearly the same amount of residual oil resources. Interwell-scale geologic facise models of Frio Fluvial-deltaic reservoirs are being combined with engineering assessments and geophysical evaluations in order to determine the controls that these characteristics exert on the location and volume or unrecovered mobile and residual oil. Progress in the third year centered on technology transfer. An overview of project tasks is presented.

  6. Estimation of uranium migration parameters in sandstone aquifers.

    Science.gov (United States)

    Malov, A I

    2016-03-01

    The chemical composition and isotopes of carbon and uranium were investigated in groundwater samples that were collected from 16 wells and 2 sources in the Northern Dvina Basin, Northwest Russia. Across the dataset, the temperatures in the groundwater ranged from 3.6 to 6.9 °C, the pH ranged from 7.6 to 9.0, the Eh ranged from -137 to +128 mV, the total dissolved solids (TDS) ranged from 209 to 22,000 mg L(-1), and the dissolved oxygen (DO) ranged from 0 to 9.9 ppm. The (14)C activity ranged from 0 to 69.96 ± 0.69 percent modern carbon (pmC). The uranium content in the groundwater ranged from 0.006 to 16 ppb, and the (234)U:(238)U activity ratio ranged from 1.35 ± 0.21 to 8.61 ± 1.35. The uranium concentration and (234)U:(238)U activity ratio increased from the recharge area to the redox barrier; behind the barrier, the uranium content is minimal. The results were systematized by creating a conceptual model of the Northern Dvina Basin's hydrogeological system. The use of uranium isotope dating in conjunction with radiocarbon dating allowed the determination of important water-rock interaction parameters, such as the dissolution rate:recoil loss factor ratio Rd:p (a(-1)) and the uranium retardation factor:recoil loss factor ratio R:p in the aquifer. The (14)C age of the water was estimated to be between modern and >35,000 years. The (234)U-(238)U age of the water was estimated to be between 260 and 582,000 years. The Rd:p ratio decreases with increasing groundwater residence time in the aquifer from n × 10(-5) to n × 10(-7) a(-1). This finding is observed because the TDS increases in that direction from 0.2 to 9 g L(-1), and accordingly, the mineral saturation indices increase. Relatively high values of R:p (200-1000) characterize aquifers in sandy-clayey sediments from the Late Pleistocene and the deepest parts of the Vendian strata. In samples from the sandstones of the upper part of the Vendian strata, the R:p value is ∼ 24, i.e., sorption processes are

  7. Sandstone type uranium deposits in the Ordos Basin, Northwest China: A case study and an overview

    Science.gov (United States)

    Akhtar, Shamim; Yang, Xiaoyong; Pirajno, Franco

    2017-09-01

    This paper provides a comprehensive review on studies of sandstone type uranium deposits in the Ordos Basin, Northwest China. As the second largest sedimentary basin, the Ordos Basin has great potential for targeting sandstone type U mineralization. The newly found and explored Dongsheng and Diantou sandstone type uranium deposits are hosted in the Middle Jurassic Zhilou Formation. A large number of investigations have been conducted to trace the source rock compositions and relationship between lithic subarkose sandstone host rock and uranium mineralization. An optical microscopy study reveals two types of alteration associated with the U mineralization: chloritization and sericitization. Some unusual mineral structures, with compositional similarity to coffinite, have been identified in a secondary pyrite by SEM These mineral phases are proposed to be of bacterial origin, following high resolution mapping of uranium minerals and trace element determinations in situ. Moreover, geochemical studies of REE and trace elements constrained the mechanism of uranium enrichment, displaying LREE enrichment relative to HREE. Trace elements such as Pb, Mo and Ba have a direct relationship with uranium enrichment and can be used as index for mineralization. The source of uranium ore forming fluids and related geological processes have been studied using H, O and C isotope systematics of fluid inclusions in quartz veins and the calcite cement of sandstone rocks hosting U mineralization. Both H and O isotopic compositions of fluid inclusions reveal that ore forming fluids are a mixture of meteoric water and magmatic water. The C and S isotopes of the cementing material of sandstone suggest organic origin and bacterial sulfate reduction (BSR), providing an important clue for U mineralization. Discussion of the ore genesis shows that the greenish gray sandstone plays a crucial role during processes leading to uranium mineralization. Consequently, an oxidation-reduction model for

  8. Reservoir Characterization of Bridgeport and Cypress Sandstones in Lawrence Field Illinois to Improve Petroleum Recovery by Alkaline-Surfactant-Polymer Flood

    Energy Technology Data Exchange (ETDEWEB)

    Seyler, Beverly; Grube, John; Huff, Bryan; Webb, Nathan; Damico, James; Blakley, Curt; Madhavan, Vineeth; Johanek, Philip; Frailey, Scott

    2012-12-21

    Within the Illinois Basin, most of the oilfields are mature and have been extensively waterflooded with water cuts that range up to 99% in many of the larger fields. In order to maximize production of significant remaining mobile oil from these fields, new recovery techniques need to be researched and applied. The purpose of this project was to conduct reservoir characterization studies supporting Alkaline-Surfactant-Polymer Floods in two distinct sandstone reservoirs in Lawrence Field, Lawrence County, Illinois. A project using alkaline-surfactantpolymer (ASP) has been established in the century old Lawrence Field in southeastern Illinois where original oil in place (OOIP) is estimated at over a billion barrels and 400 million barrels have been recovered leaving more than 600 million barrels as an EOR target. Radial core flood analysis using core from the field demonstrated recoveries greater than 20% of OOIP. While the lab results are likely optimistic to actual field performance, the ASP tests indicate that substantial reserves could be recovered even if the field results are 5 to 10% of OOIP. Reservoir characterization is a key factor in the success of any EOR application. Reservoirs within the Illinois Basin are frequently characterized as being highly compartmentalized resulting in multiple flow unit configurations. The research conducted on Lawrence Field focused on characteristics that define reservoir compartmentalization in order to delineate preferred target areas so that the chemical flood can be designed and implemented for the greatest recovery potential. Along with traditional facies mapping, core analyses and petrographic analyses, conceptual geological models were constructed and used to develop 3D geocellular models, a valuable tool for visualizing reservoir architecture and also a prerequisite for reservoir simulation modeling. Cores were described and potential permeability barriers were correlated using geophysical logs. Petrographic analyses

  9. Effect of Various Silica Nanofluids: Reduction of Fines Migrations and Surface Modification of Berea Sandstone

    Directory of Open Access Journals (Sweden)

    Rockey Abhishek

    2017-11-01

    Full Text Available This work is aimed at addressing surface modification of berea sandstone by silica nanofluids (NFs. Three types of nanofluids were used: silica/deionized water (DIW, silica in DIW with a stabilizer fluid (3-Mercaptopropyl Trimethoxysilane and sulfonate-functionalized silica in DIW. Core flood studies showed that application of silica nanoparticles (NPs improved water injectivity in sandstone. The change in the measured zeta potential indicated surface modification of sandstone by application of NPs. Computation of the surface forces showed that the modified berea sandstone has net attractive potential with fines (obtained from water/rock interaction leading to reduction of fines migration, hence improvement of water injectivity. It was also observed that the silica NPs have greater affinity to adhere/adsorb on quartz surfaces than kaolinite in berea core. This was confirmed by scanning electron microscope imaging and isothermal static adsorption tests. Although the stabilizing of NFs almost did not reduce the fine migration, as was qualitatively indicated by the pressure drop, it enhanced the NPs adsorption on the minerals as obtained by isothermal static adsorption tests. The reduction of fines migration due surface modification by silica NP suggests that NPs can be utilized to overcome the problem of formation damage induced during low salinity flooding in sandstones.

  10. Heavy mineral sorting in downwards injected Palaeocene sandstone, Siri Canyon, Danish North Sea

    Science.gov (United States)

    Kazerouni, Afsoon Moatari; Friis, Henrik; Svendsen, Johan Byskov; Weibel, Rikke

    2011-05-01

    Post-depositional remobilization and injection of sand are often seen in deep-water clastic systems and have been recently recognised as a significant modifier of deep-water sandstone geometry. Large scale injectite complexes have been interpreted from borehole data in the Palaeocene Siri Canyon near the Danish Central Graben of the North Sea hydrocarbon province. The emplacement of large scale injectite complexes has been commonly attributed to seismic activity and consequent sand liquefaction. However, due to very small differences in textural and compositional properties, and the lack of depositional structures in deep-water sandstones, the distinction between "in situ" and injected or remobilized sandstones is often ambiguous. Large scale heavy mineral sorting (in 10 m thick units) is observed in several reservoir units in the Siri Canyon and has been interpreted to represent the depositional sorting. In this study we describe an example of effective shear-zone sorting of heavy minerals in a thin downwards injected sandstone dyke which was encountered in one of the cores in the Cecilie Field, Siri Canyon. Differences in sorting pattern of heavy minerals are suggested as a tool for petrographic/geochemical distinction between "in situ" sandstones and their related injectites, especially where primary sedimentary structures are removed by fluidization or minor remobilization.

  11. Lithofacies and depositional environment of the Amasiri Sandstone, southern Benue Trough, Nigeria

    Science.gov (United States)

    Okoro, A. U.; Igwe, E. O.

    2014-12-01

    Eight lithofacies typical of tidally-influenced shelf, mass flow and turbidity current processes characterize the Amasiri Sandstone (Cenomanian - Turonian) in the southern Benue Trough, Nigeria. The cross bedded sandstone lithofacies (Sxm) in Afikpo area were deposited in tidally influenced, shallow sandy shoreline environment while similar lithofacies associated with the conglomeratic lithofacies (Sfc) in Akpoha are proximal canyon-fill deposits. The conglomeratic lithofacies with rip-up clasts together with the massive, horizontal-bedded lithofacies (Smm) and parallel-laminated sandstone lithofacies (Sfl) in Akpoha were deposited in confined channels in proximal submarine canyon setting. The wavy/ripple-laminated sandstone lithofacies (Sfw) and very fine grained bioturbated sandstones lithofacies (Sfb) represent weakly confined distributary splay and unconfined associations in proximal to distal submarine canyon settings. The bioturbated mudstone lithofacies (Msb) and parallel-laminated mudstones lithofacies (Msl) comprise the bypass/levees association in the inner to outer shelf and in the distal canyon settings. Overall, these lithofacies indicate deposition in shelf to deep water depositional environments.

  12. The effect of fluid saturation on the dynamic shear modulus of tight sandstones

    Science.gov (United States)

    Li, Dongqing; Wei, Jianxin; Di, Bangrang; Ding, Pinbo; Shuai, Da

    2017-10-01

    Tight sandstones have become important targets in the exploration of unconventional oil and gas reservoirs. However, due to low porosity, low permeability, complex pore structure and other petrophysical properties of tight sandstones, the applicability of Gassmann’s fluid substitution procedure becomes debatable. Aiming at this problem, this paper attempts to explore the applicability of Gassmann’s theory in tight sandstones. Our focus is to investigate the sensitivity of dynamic shear modulus to fluid saturation and the possible mechanism. Ultrasonic velocity in dry and saturated tight sandstone samples was measured in the laboratory under an effective pressure within the range of 1-60 MPa. This study shows that the shear modulus of the water-saturated samples appears to either increase or decrease, and the soft porosity model (SPM) can be used to quantitatively estimate the variation of shear modulus. Under the condition of in situ pressure, samples dominated by secondary pores and microcracks are prone to show shear strengthening with saturation, which is possibly attributed to the local flow dispersion. Samples that mainly have primary pores are more likely to show shear weakening with saturation, which can be explained by the surface energy mechanism. We also find good correlation between changes in shear modulus and inaccurate Gassmann-predicted saturated velocity. Therefore, understanding the variation of shear modulus is helpful to improving the applicability of Gassmann’s theory in tight sandstones.

  13. Distribution and properties of mesozoic sandstones and barrier rocks in Schleswig-Holstein and Hamburg. Basic informations on possible energetic utilisation of the deeper subsurface; Verbreitung und Eigenschaften mesozoischer Sandsteine sowie ueberlagernder Barrieregesteine in Schleswig-Holstein und Hamburg. Basisinformationen zur energiewirtschaftlichen Nutzung des tieferen Untergrundes

    Energy Technology Data Exchange (ETDEWEB)

    Kaufhold, Holger; Hable, Regina; Liebsch-Doerschner, Thomas; Thomsen, Claudia [Landesamt fuer Landwirtschaft, Umwelt und Laendliche Raeume Schleswig-Holstein (LLUR), Flintbek (Germany). Geologischer Dienst; Taugs, Renate [Behoerde fuer Stadtentwicklung und Umwelt, Hamburg (Germany). Geologisches Landesamt Hamburg

    2011-07-01

    Within the scope of the project Storage Catalogue of Germany the Geological Survey of Schleswig-Holstein (LLUR, Flintbek) studied mesozoic sedimentary systems in Schleswig-Holstein and Hamburg with regard to petrophysical properties. The main objective of the study, which was part of a joint research project of the Federal Institute for Geosciences and Natural Resources (BGR) and the State Geological Surveys of Germany, consisted in mapping of sandstone and barrier rock units and in characterization of its storage potential. The interest was focussed on sandstone layers of the Middle Buntsandstein (Lower Triassic), of the Rhaetian Exter Formation (Upper Triassic) and of Middle Jurassic. Whereas Early Triassic (Middle Buntsandstein) sandstones occur over the entire area of Schleswig-Holstein and Hamburg, Late Triassic and Middle Jurassic sandstones are linked to halokinetic rim synclines. The results discussed herein show that a greater part of the concerned sandstone units offers potential options of different usage. But available reservoir and barrier data allow no definite conclusions for CO{sub 2}-storage suitability. (orig.)

  14. Petrography and Diagenesis of Palaeocene -Eocene Sandstones in the Siri Canyon, Danish North Sea

    DEFF Research Database (Denmark)

    Kazerouni, Afsoon Moatari

       Glaconitic sandstones reservoir in the Siri Canyon are the basis for the investigatation of the geochemical composition of the reservoir sand in cores and also petrographic investigations by optical microscope, scanning electron microscope (SEM) examinations, XRF and microprobe analyses.......   The Palaeogene sequence of the Siri Canyon fill consists of hemipelagic and turbidite marl and claystones interbedded with massive and blocky glauconitic sandstones deposited from sandy mass-flows and sandy turbidites. The Palaeogene sediments in the Danish area are rich in siliceous microfossils as well as late...... zeolites may be common in deep marine sediments, and in volcanoclastic deposits. They are generally related to dissolution of siliceous fossils or diagenetic alteration of volcanic glass. However, authigenic zeolites are common in some of the glauconitic sandstones from the Siri Canyon, where...

  15. [Application of near-infrared spectrum technology to research of weathering of red sandstone relics].

    Science.gov (United States)

    Jiang, Xiao-Dong; Cao, Jian-Jin; Li, Yi-An; Yin, Jin-Long; Ye, Jin-Long

    2011-08-01

    In the present paper, with near infrared spectroscopy technology, the weathering mechanism of red sandstone relics was studied. Six groups of red sandstone samples were analyzed using near infrared spectroscopy technology. The results show that the near-infrared spectroscopy technology can analyze the material composition of red sandstone before and after weathering, aiming to explore their components changed. So it is a quick and efficient means of research with characteristic of less measurement sample and speed and non-damage and being pollution-free compared with other research techniques. All the characteristic shows that it is also well for studying other stone cultural relics. Especially for those with sampling difficulty and treasure valuable, non-destruction of stone cultural relics is particularly important. So with time advancing, near infrared technology as a research means of stone relics, its meaning will be more prominent.

  16. Identifying provenance-specific features of detrital heavy mineral assemblages in sandstones

    Science.gov (United States)

    Morton, Andrew C.; Hallsworth, Claire

    1994-05-01

    The composition of heavy mineral assemblages in sandstones may be heavily influenced by processes operating during transport, deposition and diagenesis. As a consequence, conventional heavy mineral data may not be a reliable guide to the nature of sediment source material. Certain features of heavy mineral suites, however, are inherited directly from the source area without significant modification, such as the varietal characteristics of individual mineral species. This paper describes an alternative approach to varietal studies that concentrates on relative abundances of minerals that are stable during diagenesis and have similar hydraulic behaviour. Ratios of apatite to tourmaline, TiO 2 minerals to zircon, monazite to zircon, and chrome spinel to zircon provide a good reflection of the source rock characteristics, because they are comparatively immune to alteration during the sedimentary cycle. These ratios are described as index values (ATi, RZi, MZi and CZi, respectively). This approach avoids some of the practical problems associated with varietal studies, such as the need to make subjective decisions about mineral properties or to use advanced analytical techniques that may not be accessible to the analyst. It also makes use of more components of the heavy mineral suite and thus provides a more balanced view of provenance characteristics. The use of these ratios is illustrated with examples from Upper Jurassic sandstones in the Outer Moray Firth area of the UK continental shelf and Triassic sandstones from onshore and offshore UK. Heavy mineral indices, notably ATi and MZi, show marked variations in Upper Jurassic Piper sandstones of the Outer Moray Firth. Main Piper sandstones have lower ATi and MZi values compared with Supra Piper sandstones, indicating significant stratigraphic evolution of provenance. The UK Triassic shows major regional variations in a number of index values, including ATi, MZi and CZi, demonstrating that sediment was supplied from

  17. Geological and petrophysical characterization of the Ferron Sandstone for 3-D simulation of a fluvial-deltaic reservoir. Technical progress report, January 1, 1995--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Allison, M.L.

    1995-05-02

    The objective of this project is to develop a comprehensive, interdisciplinary, and quantitative characterization of a fluvial-deltaic reservoir which will allow realistic inter-well and reservoir-scale modeling to be developed for improved oil-field development in similar reservoirs world-wide. The geological and petrophysical properties of the Cretaceous Ferron Sandstone in east-central Utah will be quantitatively determined. Both new and existing data will be integrated into a three-dimensional representation of spatial variations in porosity, storativity, and tensorial rock permeability at a scale appropriate for inter-well to regional-scale reservoir simulation. Results could improve reservoir management through proper infill and extension drilling strategies, reduction of economic risks, increased recovery from existing oil fields, and more reliable reserve calculations. Transfer of the project results to the petroleum industry is an integral component of the project.

  18. CO2-Driven Convection Produced the Vertical Distribution of Sandstone Colors and Iron Concretions in Navajo Sandstone at Zion National Park, Utah (USA)

    Science.gov (United States)

    Kettler, R. M.; Loope, D. B.

    2011-12-01

    Along cliff faces exposed in Zion National Park (SW Utah), the porous and permeable Navajo Sandstone (Jurassic) is 700 m thick, and is capped by impermeable mudrocks and evaporites of the Carmel Formation. Previous workers have documented an areally extensive color pattern that is easily visible across much of southwestern and south-central Utah: the uppermost Navajo Sandstone is nearly white, the middle third of the formation is pink, and the lowermost fraction is reddish brown. To the northwest of the park, however, the formation is uniformly red (likely its primary color; G.B. Nielsen et al., 2009). Spheroidal concretions with dense, iron-oxide-cemented rinds and iron-poor cores are abundant in the pink and brown sandstones. Rhomb-shaped clots of iron oxide cement that are pseudomorphous after siderite are present in the cores of the largest concretions. The color variations are evidence that iron was transported from the upper portion of the Navajo SS to the lower portion. The pseudomorphs are evidence that the concretions are the oxidized remains of siderite-cemented precursors. The vertical iron transport and the precipitation of siderite require similar vertical transport of reducing, CO2-rich formation waters through the Navajo Sandstone. We argue that this circulation was driven in part by groundwater convection beneath a CO2 accumulation that was trapped below the Navajo-Carmel contact. This circulation caused aqueous iron and aqueous carbonate to be displaced downward and to accumulate (in the form of siderite) in the lower Navajo Sandstone. There are numerous CO2 reservoirs in the Colorado Plateau region; the gas was derived mainly from mantle sources. We hypothesize that, in the late Tertiary, the Carmel Formation capped a broad, structurally high accumulation of CO2 and CH4 in the Navajo Sandstone. The CH4 bleached the upper portion of the sandstone, releasing Fe2+ into the formation water. CO2 dissolved in the water, thereby increasing its density

  19. Sandstone/Shale-Brine-CO2 interactions: Implications for Geological Carbon Sequestration

    Science.gov (United States)

    Lu, P.; Liu, F.; Fu, Q.; Seyfried, W. E.; Hedges, S.; Griffith, C.; Soong, Y.; Zhu, C.

    2009-12-01

    The injection of CO2 into deep saline aquifers is presently being considered as an option for greenhouse gas mitigation. However, significant amount of CO2-water-rock interactions brings uncertainties to this potential option because these interactions may either enhance or decrease the potential storage capacity of the reservoirs by dissolution of primary minerals and precipitation of secondary clays. In addition, these reactions may enhance or compromise the mechanical properties of the seals or cap rocks. A series of Sandstone/Shale-Brine-CO2 hydrothermal experiments have been performed at 200 oC, with the addition of CO2 (PCO2 up to 300 bars). Navajo sandstone samples were collected from Black Mesa, Arizona. The Jurassic Navajo/Nugget Sandstone is identified as regionally extensive in the western U.S. and selected as the target for one of the large-volume injection tests by the Big Sky Carbon Sequestration Partnership. Shale chips were obtained from the basal Eau Claire Formation in Southwest of Indiana. Eau Claire Shale overlies Mt. Simon Sandstone which is recognized as a highly promising host reservoir targeted for carbon sequestration by the Midwest Geological Sequestration Consortium (MGSC). Experiments of Navajo sandstones show that silicate minerals in the sandstone display dissolution textures. The formation of carbonate minerals (mineral trapping) is thermodynamically favored and experimentally observed. The chemical reactions likely increase the porosity of the sandstone due to silicate dissolution. However, allophane and illite/smectite cements fill voids of sandstone grains. There is no evidence that suggests the removal of clay coating due to chemical reactions. It is uncertain whether the mechanical forces near in the injection well would mobilize the smectite and allophane and cause pore clogging. In contrast, for CO2-brine-shale system, only minor dissolution of K-feldspar and anhydrite was observed. However, precipitation of pore-filling and

  20. Contribution of thermal radiation in measurements of thermal conductivity of sandstone

    Science.gov (United States)

    Zarichnyak, Yu. P.; Ramazanova, A. E.; Emirov, S. N.

    2013-12-01

    The effective thermal conductivity of sandstone at high pressures of up to 400 MPa and temperatures of 273-523 K has been studied. It has been shown that the degree of crystallization of rock-forming minerals substantially influences the temperature and pressure dependences of the thermal conductivity. The contribution of the radiation heat transfer in measurements of the thermal conductivity of sandstone at various temperatures has been analyzed taking into account the reflection and attenuation of the thermal radiation. The results of measuring the reflection and absorption spectra of the thermal radiation have been presented.

  1. Effects of contamination by geothermal drilling mud on laboratory determinations of sandstone pore properties: an evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Arenas, A.; Iglesias, E.; Izquierdo, G.; Guevara, M.; Oliver, R.; Santoyo, S.

    1982-01-01

    Research to evaluate formation damage related to drilling fluids used in Mexican geothermal fields was initiated. The initial work has been done on Berea sandstone for two reasons: (1) to save valuable reservoir drill cores while developing and turning experimental techniques, and (2) for comparison with results from other investigations, since Berea sandstone has been extensively studied and used in permeability impairment research. The magnitudes of permeability reductions associated with high-temperature rock/geothermal drilling fluid interactions, the possibility of restoring the unperturbed permeability to reservoir drill cores for its measurement in the laboratory were emphasized.

  2. Characterizing flow pathways in a sandstone aquifer: Tectonic vs sedimentary heterogeneities

    Science.gov (United States)

    Medici, G.; West, L. J.; Mountney, N. P.

    2016-11-01

    Sandstone aquifers are commonly assumed to represent porous media characterized by a permeable matrix. However, such aquifers may be heavy fractured when rock properties and timing of deformation favour brittle failure and crack opening. In many aquifer types, fractures associated with faults, bedding planes and stratabound joints represent preferential pathways for fluids and contaminants. In this paper, well test and outcrop-scale studies reveal how strongly lithified siliciclastic rocks may be entirely dominated by fracture flow at shallow depths (≤ 180 m), similar to limestone and crystalline aquifers. However, sedimentary heterogeneities can primarily control fluid flow where fracture apertures are reduced by overburden pressures or mineral infills at greater depths. The Triassic St Bees Sandstone Formation (UK) of the East Irish Sea Basin represents an optimum example for study of the influence of both sedimentary and tectonic aquifer heterogeneities in a strongly lithified sandstone aquifer-type. This fluvial sedimentary succession accumulated in rapidly subsiding basins, which typically favours preservation of complete depositional cycles including fine grained layers (mudstone and silty sandstone) interbedded in sandstone fluvial channels. Additionally, vertical joints in the St Bees Sandstone Formation form a pervasive stratabound system whereby joints terminate at bedding discontinuities. Additionally, normal faults are present through the succession showing particular development of open-fractures. Here, the shallow aquifer (depth ≤ 180 m) was characterized using hydro-geophysics. Fluid temperature, conductivity and flow-velocity logs record inflows and outflows from normal faults, as well as from pervasive bed-parallel fractures. Quantitative flow logging analyses in boreholes that cut fault planes indicate that zones of fault-related open fractures characterize 50% of water flow. The remaining flow component is dominated by bed-parallel fractures

  3. Petrography and geochemistry of the Middle Miocene Gebel El Rusas sandstones, Eastern Desert, Egypt: Implications for provenance and tectonic setting

    Science.gov (United States)

    Zaid, Samir M.

    2017-10-01

    Petrography and bulk rock geochemistry of the Middle Miocene sandstones of the lower and upper members of Gebel El Rusas Formation along the Egyptian Red Sea Coastal plain, have been investigated to determine the provenance, tectonic setting, and weathering condition of this formation. The Lower Member is formed mainly of sandstones and conglomerates with clay interbeds. The Upper Member is more calcareous and formed mainly of sandstones and limestones with marls and clays intercalations. Petrographically, the Lower Member sandstones are mostly immature and classified as arkoses with an average framework composition of Q_{66}F_{29}R5, and the Upper Member sandstones are partly submature (more quartzose, less feldspathic) and classified as subarkoses with an average framework composition of Q_{80}F_{17}R3. The Gebel El Rusas sandstones are enriched in Sr, Ba, Zr and Rb and depleted in Co and U, as compared to UCC. The chemical index of alteration (CIA) values suggest moderate weathering conditions. The geochemistry results revealed that the Gebel El Rusas sandstones were derived from felsic-granitic source rocks and deposited in a passive margin of a synrift basin. The inferred tectonic setting for Middle Miocene Gebel El Rusas sandstones in the study area is consistent with the regional geology of the Eastern Desert of Egypt during Middle Miocene.

  4. The influence of climate on early and burial diagenesis of Triassic and Jurassic sandstones from the Norwegian – Danish Basin

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kjøller, Claus

    2017-01-01

    Climate changes preserved in sandstones are documented by comparing the sediment composition and early diagenetic changes in sandstones deposited during arid to semi-arid conditions, the Skagerrak Formation, with sandstones of the Gassum Formation deposited in a humid well-vegetated environment...... to the Gassum Formation, which was characterized by quartz and more stable heavy minerals. The arid to semi-arid climate led to early oxidising conditions under which abundant iron-oxide/hydroxide coatings formed, while the evaporative processes occasionally resulted in caliche and gypsum precipitation. Under...... changes occurring during deeper burial, so dolomite preferentially formed in the sandstones deposited in an arid environment while ankerite characterises sandstones deposited under humid conditions. In addition to climate induced burial diagenetic changes, there are also temperature dependent phases...

  5. Deformation bands in porous sandstones their microstructure and petrophysical properties

    Energy Technology Data Exchange (ETDEWEB)

    Torabi, Anita

    2007-12-15

    deformation bands are characterized by strain hardening, these new bands feature a central slip surface, which indicates late strain softening. They lack the characteristic compaction envelop, and are typified by higher porosity and lower permeability than previously-described cataclastic deformation bands. Intense background fracturing of the host rock and significant initial porosity are considered to be important in creating these newly-discovered deformation bands. In a related study, we investigate, for millimeter- wide deformation bands, the scale limitation inherent in laboratory measurements of porosity and permeability. The scale limitations imposed by the deformation band relative to the physical sample size motivated us to develop a new method for determining porosity and permeability based on image processing. While plug measurements measure the effective permeability across a 25.4 mm (1 inch) long sample, which includes both host rock and deformation band, the method presented here provides a means to estimate porosity and permeability of deformation band on microscale. This method utilizes low-order (one- and two orders) spatial correlation functions to analyze high-resolution, high-magnification backscatter images, to estimate the porosity and specific surface area of the pore-grain interface in the deformed sandstones. Further, this work demonstrates the use of a modified version of the Kozeny-Carmen relation to calculate permeability by using porosity and specific surface area obtained through the image processing. The result shows that permeability difference between the band and the host rock is up to four orders of magnitude. Moreover, the porosities and permeabilities estimated from image processing are lower than those obtained from their plug measurements; hence the traditional laboratory measurements have been overestimating permeability because of the previously-unrecognized scale problem. In addition, the image processing results clearly show that

  6. Early cretaceous Obernirchen and Bentheim sandstones from Germany used as dimension stone in the Netherlands: geology physical properties, architectural use and comparative weathering

    NARCIS (Netherlands)

    Dubelaar, C.W.; Nijland, T.G.

    2015-01-01

    The Netherlands, with only scarce occurrences of outcropping or shallow buried natural stone, has over centuries imported huge quantities of Early Cretaceous Bentheim Sandstone and Obernkirchen Sandstone from Germany. The present paper provides an overview of their distribution and properties

  7. Initiation and propagation of mixed mode fractures in granite and sandstone

    Science.gov (United States)

    Rück, Marc; Rahner, Roman; Sone, Hiroki; Dresen, Georg

    2017-10-01

    We investigate mixed mode fracture initiation and propagation in experimentally deformed granite and sandstone. We performed a series of asymmetric loading tests to induce fractures in cylindrical specimens at confining pressures up to 20 MPa. Loading was controlled using acoustic emission (AE) feedback control, which allows studying quasi-static fracture propagation for several hours. Location of acoustic emissions reveals distinct differences in spatial-temporal fracture evolution between granite and sandstone samples. Before reaching peak stress in experiments performed on granite, axial fractures initiate first at the edge of the indenter and then propagate through the entire sample. Secondary inclined fractures develop during softening of the sample. In sandstone, inclined shear fractures nucleate at peak stress and propagate through the specimen. AE source type analysis shows complex fracturing in both materials with pore collapse contributing significantly to fracture growth in sandstone samples. We compare the experimental results with numerical models to analyze stress distribution and energy release rate per unit crack surface area in the samples at different stages during fracture growth. We thereby show that for both rock types the energy release rate increases approximately linearly during fracture propagation. The study illuminates how different material properties modify fracture initiation direction under similar loading conditions.

  8. Structural changes in the surface of a heterogeneous nanocrystalline body (sandstone) under the friction

    Science.gov (United States)

    Vettegren, V. I.; Ponomarev, A. V.; Sobolev, G. A.; Shcherbakov, I. P.; Mamalimov, R. I.; Kulik, V. B.; Patonin, A. V.

    2017-03-01

    The structure of a 30 nm thick surface layer of a heterogeneous nanocrystalline solid body (sandstone) before and after the friction was investigated using photoluminescence and Raman spectroscopy. Before the friction, this layer contained nanocrystals of quartz, anatase, feldspar, and montmorillonite. The friction caused a sharp decrease in the concentration of nanocrystals of quartz and feldspar.

  9. Original and pyrometamorphical altered Bentheimer sandstone : Petrophysical properties, surface and dielectric behavior

    NARCIS (Netherlands)

    Peksa, A.E.; Wolf, K.H.A.A.; Slob, E.C.; Chmura, L.A.; Zitha, P.L.J.

    2016-01-01

    Bentheimer sandstone is a quartz-rich permeable hard sedimentary rock used for core flooding experiments. When fired to stabilize clays (subjected to high temperatures), pyrometamorphical phase changes induce texture and pore framework alteration. As a consequence the new dielectric response may

  10. A new biostratigraphical tool for reservoir characterisation and well correlation in permo-carboniferous sandstones

    NARCIS (Netherlands)

    Garming, J.F.L.; Cremer, H.; Verreussel, R.M.C.H.; Guasti, E.; Abbink, O.A.

    2010-01-01

    Permo-Carboniferous sandstones are important reservoir rocks for natural gas in the Southern North Sea basin. This is a mature area which makes tools for reservoir characterization and well to well correlation important for field optimalisation and ongoing exploration activities. Within the

  11. Concurrent nitrate and Fe(III) reduction during anaerobic biodegradation of phenols in a sandstone aquifer

    DEFF Research Database (Denmark)

    Broholm, Mette; Crouzet, C.; Arvin, Erik

    2000-01-01

    The biodegradation of phenols (similar to 5, 60, 600 mg 1(-1)) under anaerobic conditions (nitrate enriched and unamended) was studied in laboratory microcosms with sandstone material and groundwater from within an anaerobic ammonium plume in an aquifer, The aqueous phase was sampled and analyzed...

  12. Prediction of calcite Cement Distribution in Shallow Marine Sandstone Reservoirs using Seismic Data

    Energy Technology Data Exchange (ETDEWEB)

    Bakke, N.E.

    1996-12-31

    This doctoral thesis investigates how calcite cemented layers can be detected by reflection seismic data and how seismic data combined with other methods can be used to predict lateral variation in calcite cementation in shallow marine sandstone reservoirs. Focus is on the geophysical aspects. Sequence stratigraphy and stochastic modelling aspects are only covered superficially. Possible sources of calcite in shallow marine sandstone are grouped into internal and external sources depending on their location relative to the presently cemented rock. Well data and seismic data from the Troll Field in the Norwegian North Sea have been analysed. Tuning amplitudes from stacks of thin calcite cemented layers are analysed. Tuning effects are constructive or destructive interference of pulses resulting from two or more closely spaced reflectors. The zero-offset tuning amplitude is shown to depend on calcite content in the stack and vertical stack size. The relationship is found by regression analysis based on extensive seismic modelling. The results are used to predict calcite distribution in a synthetic and a real data example. It is found that describing calcite cemented beds in shallow marine sandstone reservoirs is not a deterministic problem. Hence seismic inversion and sequence stratigraphy interpretation of well data have been combined in a probabilistic approach to produce models of calcite cemented barriers constrained by a maximum amount of information. It is concluded that seismic data can provide valuable information on distribution of calcite cemented beds in reservoirs where the background sandstones are relatively homogeneous. 63 refs., 78 figs., 10 tabs.

  13. Seasonal Deep Aquifer Thermal Energy Storage in the Gassum Sandstone Formation

    DEFF Research Database (Denmark)

    Holmslykke, H.D.H.; Kjøller, C.; Fabricius, Ida Lykke

    Seasonal storage of excess heat in hot deep aquifers is considered to optimise the usage of commonly available energy sources. The potential chemical reactions caused by heating the Gassum Sandstone Formation to up to 150°C is investigated by core flooding experiments combined with petrographic...

  14. Comparative Analysis of the Strength Distribution for Irregular Particles of Carbonates, Shale, and Sandstone Ore

    Directory of Open Access Journals (Sweden)

    Alona Nad

    2018-01-01

    Full Text Available The article presents the results of investigations on three lithological types of Polish copper ore: sandstone ore, carbonate ore, and shale ore. According to X-ray diffraction analysis, sandstone samples can be classified as sandstone with dolomite binder and partly clay binder; shale—as dolomitic slate with a high proportion of clay with elevated organic matter content; while dolomite has a high organic content. Five particle-sized fractions (16–18 mm, 18–20 mm, 20–25 mm, 25–31.5 mm, and 31.5–45 mm of each lithological type were prepared. A single-axis slow-compression test was performed on single particles to determine the value of the crushing force. The Weibull distribution was used to approximate the strength distribution models and cumulative strength distribution functions for each of the materials. The residual deviation and non-linear correlation coefficient were calculated in order to assess the fitting of the model function to empirical data. In addition, the impact of particle size on the strength of the raw material was separately investigated for the hard (dolomite and shale and soft brittle material (sandstone.

  15. Zeolites in the Miocene Briones Sandstone and related formations of the central Coast Ranges, California

    Science.gov (United States)

    Murata, K.J.; Whiteley, Karen R.

    1973-01-01

    Authigenic zeolites present in the generally tuffaceous Miocene Briones Sandstone and related formations of the central Coast Ranges of California indicate three stages of diagenetic history: (1) Initial alteration of pyroclastic materials to clinoptilolite (and montmorillonite) that is widely distributed in small amounts throughout the region. (2) Subsequent crystallization of heulandite followed by stilbite in fractures at a few places. (3) Widespread development of laumontite in only the southern part of the region, where the sandstone appears to have been downfolded and faulted to greater depths than elsewhere. Laumontite occurs both as pervasive cement of sandstone and as filling of fractures, and was produced through the reaction of interstitial solutions with other zeolites and with such major constituents of the sandstone as plagioclase, montmorillonite, and calcite at temperatures of 100° C or higher. Mordenite was found at only one locality, closely associated with clinoptilolite and opal. Analcite occurs in diverse settings, and its relation to the other zeolites is obscure.  Sparry calcite and coexisting stilbite, laumontite, or analcite in veins seem to make up nonequilibrium assemblages.

  16. Sources of the elements in the sandstone-type uranium deposits of the Colorado Plateau

    Science.gov (United States)

    Shoemaker, Eugene M.; Newman, W.L.; Miesch, A.T.

    1956-01-01

    Sandstone-type uranium deposits of the Colorado Plateau are epigenetic. Certain elements have been added locally to the sandstone host to form the deposits; the added fraction of each element in the deposits is call extrinsic to distinguish it from the part present in the original unmineralized host. The principal extrinsic components, in their approximate order of abundance, are vanadium, iron magnesium, uranium, sulfur, arsenic, copper, lead, molbedenum, selenium, cobalt, and nickel. At lest six possible sources of the extrinsic components of the uranium deposits may be considered reasonably likely: 1) the sandstone beds enclosing the uranium deposits, 2) the marine Mancos shales of Cretaceous ages, 3) bentonitic shales of Jurassic and Triassic age, 4) petroliferous rocks of Pennsylvanian age, 5) Precambrian crystalline rocks underlying the Colorado Plateau, and 6) magmatic reservoirs of latest Cretaceous or Tertiary age. If the major source of some of the elements of external to the sandstone beds enclosing the deposits, it is likely that several sources have contributed to some if not most of the extrinsic components and that the importance of the various sources differs from one component to the next. Precambrian crystalline rocks are considered the most likely major source of the extrinsic uranium in the deposits.

  17. Continuity and internal properties of Gulf Coast sandstones and their implications for geopressured energy development. Annual report, November 1, 1980-October 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Morton, R.A.; Ewing, T.E.; Tyler, N.

    1982-06-01

    Systematic investigation, classification, and differentiation of the intrinsic properties of genetic sandstone units that typify many geopressured geothermal aquifers and hydrocarbon reservoirs of the Gulf Coast region are provided. The following are included: structural and stratigraphic limits of sandstone reservoirs; characteristics and dimensions of Gulf Coast Sandstones; fault compartment areas; comparison of production and geologic estimates of aquifer volume; geologic setting and reservoir characteristics, wells of opportunity; internal properties of sandstones and implications for geopressured energy development. (MHR)

  18. Sandstone geomorphology of the Golden Gate Highlands National Park, South Africa, in a global context

    Directory of Open Access Journals (Sweden)

    Stefan W. Grab

    2011-03-01

    Full Text Available The Golden Gate Highlands National Park (GGHNP is well known for its impressive sandstone formations. While previous geoscience research in the park has focused on geology, palaeontology, slope forms and the prominent lichen weathering, remarkably little has been written on the diversity and possible origins of sandstone phenomena in the region. The objectives of this study were (1 to present a geomorphological map of prominent and interesting landforms for particular portions of the park and (2 to document the variety of macro- and microscale sandstone formations observed. During field work, we undertook global positioning system measurements to map landforms and, in addition, measured the dimensions of several landform types. A Schmidt hammer was used to conduct rock hardness tests at a variety of localities and lithologies for comparative purposes. We indentified and mapped 27 macro- and microscale sandstone landforms, of which 17 are described in detail. It is demonstrated that for the most part, the landforms are a likely product of surface lithological reactions to a regional climate characterised by pronounced multitemporal temperature and moisture shifts, recently and in the past. However, many of the geomorphological processes producing landforms are controlled by microclimates set up by factors such as macro- and microtopography. Conservation implications: The GGHNP is best known for its geological, geomorphological and palaeontological heritage. This paper highlights the diversity of sandstone geomorphological phenomena, many of them rare and ‘unique’ to the region. Not only are these landforms of aesthetic interest to tourists, but they also provide microhabitats for biota. Thus, conservation of biota requires associated conservation of geo-environments where they are established.

  19. Origin of middle Silurian Keefer sandstone, east-central Appalachian basin

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, S.C.; Textoris, D.A.; Dennison, J.M.

    1988-08-01

    The Keefer Sandstone of northeastern West Virginia and western Maryland was deposited in back-barrier, barrier-island, and marine shelf environments along a prograding, storm-dominated, mesotidal coastline of probable low wave energy. Back-barrier sediments were deposited in tidal-flat and lagoonal environments. Barrier-island sediments are dominated by cross-bedded sandstones deposited in deep, laterally migrating tidal inlets. Erosion accompanying the passage of a migrating tidal inlet usually resulted in the removal of underyling shoreface and shelf sands, so that tidal-inlet sandstones commonly lie with a markedly erosive contact on subtidal shales of the underlying Rose Hill Formation. Sand was transported to the shelf from the coastline by downwelling, storm-generated currents. Chamosite ooids formed in gently agitated waters immediately below fair-weather wave base. Outcrops to the east, which preserve back-barrier and barrier-island lithofacies, record a single basinward progradation of the shoreline. However, outcrops farther west, which preserve finer grained sandstone, shale, and limestone shelf lithofacies, document four progradational events in stacked coarsening-upward sequences. Each is typically capped by transgressive sandstones, commonly hematite ooid-bearing, which mark episodes of coastal retreat. Retreat occurred through shoreface and nearshore erosion. Chamosite ooids were transported basinward during coastal retreat and altered to hematite prior to burial. Transgressive shelf sands contain abundant coarse sand eroded from tidal-inlet deposits. Deposition of the Keefer was a response to a decrease in rate of eustatic sea level rise, or a decrease in basin subsidence rate. This was followed by deposition of the transgressive basin facies of the Rochester Shale.

  20. Changes of petrophysical properties of sandstones due to interaction with carbon dioxide, a laboratory study

    Science.gov (United States)

    Nover, Georg; von der Gönna, Jutta; Heikamp, Stephanie; Köster, Jens

    2013-04-01

    Changes of petrophysical, petrological, mineralogical, mechanical and chemical parameters were studied on sandstones from the Hessian depression and sandstones from Neidenbach (Eifel) before and after alteration with CO2. The experiments were performed in a wide pressure and temperature range (p >10 10085 weight %, density from 2.62 - 2.70 g/cm3, porosity from 25% and permeability from order in magnitude for i) and more than 1.5 orders in magnitude for ii). The mineralogical composition was unchanged within the detection limit of powder X-Ray diffraction (XRD), while X-Ray Fluorescence Analysis (XRF) indicated mobilization of calcium, magnesium, aluminum and potassium. Dissolution was confirmed by the chemical analysis (ICP-OES-MS) of recovered artificial brines that showed an increase of the ionic species Ca, Mg, Al and K after the scCO2-experiments. Partial solution of feldspar and clay was detected by optical inspection and scanning electron microprobe SEM-analysis. Low frequency electrical conductivity experiments (SIP, spectral induced polarization) exhibited both, a significant increase in conductivity that could be explained by dissolution at narrow pore throats thus causing a higher degree of interconnection of the pore system and a shift of the phase angle that indicates changes of the geometry of the pore surface area. The uniaxial compressive strength was measured before and after scCO2-treatment on a set of homogeneous sandstones from Neidenbach. These data were compared with natural analogues, e.g. bleached and unbleached sandstones from the Hessian depression. The uniaxial compressive strength of untreated and scCO2-treated samples were found to fit the range reported for sandstones.

  1. Multiple stages of aqueous alteration along fractures in mudstone and sandstone strata in Gale Crater, Mars

    Science.gov (United States)

    Yen, A. S.; Ming, D. W.; Vaniman, D. T.; Gellert, R.; Blake, D. F.; Morris, R. V.; Morrison, S. M.; Bristow, T. F.; Chipera, S. J.; Edgett, K. S.; Treiman, A. H.; Clark, B. C.; Downs, R. T.; Farmer, J. D.; Grotzinger, J. P.; Rampe, E. B.; Schmidt, M. E.; Sutter, B.; Thompson, L. M.; MSL Science Team

    2017-08-01

    The Mars rover Curiosity in Gale crater conducted the first-ever direct chemical and mineralogical comparisons of samples that have clear parent (unaltered) and daughter (altered) relationships. The mineralogy and chemistry of samples within and adjacent to alteration halos in a sandstone formation were established by the Chemistry and Mineralogy (CheMin) X-ray diffraction (XRD) instrument and the Alpha Particle X-ray Spectrometer (APXS), respectively. The Stimson formation sandstones unconformably overlie the Murray mudstone formation and represent the youngest stratigraphic unit explored by Curiosity to date. Aqueous alteration of the parent sandstone resulted in a loss of half of the original crystalline mineral phases and a three-fold increase in X-ray amorphous material. Aqueous fluids extensively leached Mg, Al, Mn, Fe, Ni, Zn and other elements from the parent material, decreased the pyroxene to feldspar ratio by a factor of two, introduced Ca and mixed-cation sulfates, and both passively and actively enriched the silica content. Leaching of Mg, Al, Mn, Fe, Ni and Zn and enrichment of Si and S are also observed in alteration halos in the underlying mudstone. These observations are consistent with infiltration of subsurface fluids, initially acidic and then alkaline, propagating along fractures crosscutting the Stimson sandstone and Murray mudstone. The geochemistry and mineralogy suggest a complicated diagenetic history with multiple stages of aqueous alteration under a variety of environmental conditions (e.g. both low and moderate pH). The formation of these alteration halos post-dates lithification of the sandstones and mudstones and represents one of the youngest hydrogeologic events presently known to have occurred in Gale crater.

  2. Elemental Gains/Losses Associated with Alteration Fractures in an Eolian Sandstone, Gale Crater, Mars

    Science.gov (United States)

    Ming, D. W.; Yen, A. S.; Gellert, R.; Sutter, B.; Berger, J. A.; Thompson, L. M.; Schmidt, M. E.; Morris, R. V.; Treiman, A. H.

    2016-01-01

    The Mars Science Laboratory rover Curiosity has traversed up section through approximately 100 m of sedimentary rocks deposited in fluvial, deltaic, lacustrine, and eolian environments (Bradbury group and overlying Mount Sharp group). The Stimson formation unconformably overlies a lacustrine mudstone at the base of the Mount Sharp group and has been interpreted to be a cross-bedded sandstone of lithified eolian dunes. Unaltered Stimson sandstone has a basaltic composition similar to the average Mars crustal composition, but is more variable and ranges to lower K and higher Al. Fluids passing through alteration "halos" adjacent to fractures have altered the chemistry and mineralogy of the sandstone. Elemental mass gains and losses in the alteration halos were quantified using immobile element concentrations, i.e., Ti (taus). Alteration halos have elemental gains in Si, Ca, S, and P and large losses in Al, Fe, Mn, Mg, Na, K, Ni, and Zn. Mineralogy of the altered Stimson is dominated by Ca-sulfates, Si-rich X-ray amorphous materials along with plagioclase feldspar, magnetite, and pyroxenes. The igneous phases were less abundant in the altered sandstone with a lower pyroxene/plagioclase feldspar. Large elemental losses suggest acidic fluids initially removed these elements (Al mobile under acid conditions). Enrichments in Si, Ca, and S suggest secondary fluids (possibly alkaline) passed through these fractures leaving behind X-ray amorphous Si and Ca-sulfates. The mechanism for the large elemental gains in P is unclear. The geochemistry and mineralogy of the altered sandstone suggests a complicated diagenetic history with multiple episodes of aqueous alteration under a variety of environmental conditions (e.g., acidic, alkaline).

  3. The Structure of Sandstones in Productive Horizons of the Permian Bituminous Deposits of Tatarstan (Russia

    Directory of Open Access Journals (Sweden)

    R.R. Khasanov

    2017-03-01

    Full Text Available The features of sandstones in productive horizons of the Permian bituminous deposits of Tatarstan (Russia have been considered. The composition and internal structure of sandstones have been studied by optical microscopy, electron paramagnetic resonance (EPR, and electron microscopy, as well as using a number of physical and chemical methods to solve special problems. The investigated sandstones belong to the greywacke group. The clastic material of sandstones contains grains of feldspar, quartz, mica, and particles of volcanic rocks. The nature and composition of cement are important parameters that determine the filtration-capacity properties of sedimentary rocks. Bituminous deposits are characterized by vertical zoning, which is expressed in the alternation of sites with varying degrees of cementation of rocks. Atten-tion has been also paid to post-sedimentation processes, such as pyritization and calcification. Pyrite forms rare xenomorphic isometric grains. The formation of pyrite occurs in diagenesis and is associated with the processes of biogenic sulfate reduction. The source of calcium for the crystallization of dispersed cal-cite in the porous space of sandstones is the underground waters of red-colored Ufimian deposits characterized by the alkaline properties favorable for calcium migration. According to the data of X-ray computed tomography, the internal space of the studied rocks is not homogeneous and represented by a system of communicated and isolated pores. In the studied samples, two types of organic matter differing in organic radicals have been detected. The first type is an organic substance of coal origin. The second type of organic matter belongs to the oil origin and refers to bitumens in its properties. The presence of a significant percentage of asphaltenes in the bitumen composition indicates the destruction of the oil substance in the near-surface conditions.

  4. Geological Carbon Sequestration Storage Resource Estimates for the Ordovician St. Peter Sandstone, Illinois and Michigan Basins, USA

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, David; Ellett, Kevin; Leetaru, Hannes

    2014-09-30

    The Cambro-Ordovician strata of the Midwest of the United States is a primary target for potential geological storage of CO2 in deep saline formations. The objective of this project is to develop a comprehensive evaluation of the Cambro-Ordovician strata in the Illinois and Michigan Basins above the basal Mount Simon Sandstone since the Mount Simon is the subject of other investigations including a demonstration-scale injection at the Illinois Basin Decatur Project. The primary reservoir targets investigated in this study are the middle Ordovician St Peter Sandstone and the late Cambrian to early Ordovician Knox Group carbonates. The topic of this report is a regional-scale evaluation of the geologic storage resource potential of the St Peter Sandstone in both the Illinois and Michigan Basins. Multiple deterministic-based approaches were used in conjunction with the probabilistic-based storage efficiency factors published in the DOE methodology to estimate the carbon storage resource of the formation. Extensive data sets of core analyses and wireline logs were compiled to develop the necessary inputs for volumetric calculations. Results demonstrate how the range in uncertainty of storage resource estimates varies as a function of data availability and quality, and the underlying assumptions used in the different approaches. In the simplest approach, storage resource estimates were calculated from mapping the gross thickness of the formation and applying a single estimate of the effective mean porosity of the formation. Results from this approach led to storage resource estimates ranging from 3.3 to 35.1 Gt in the Michigan Basin, and 1.0 to 11.0 Gt in the Illinois Basin at the P10 and P90 probability level, respectively. The second approach involved consideration of the diagenetic history of the formation throughout the two basins and used depth-dependent functions of porosity to derive a more realistic spatially variable model of porosity rather than applying a

  5. The geometry and lithology of the Cima Sandstone Lentil: a paleoseep-bearing interbed in the Moreno Formation, central California

    Science.gov (United States)

    Wheatley, P. V.; Schwartz, H.

    2007-12-01

    The Cima Sandstone Lentil outcrops over a relatively small area on the western side of the San Joaquin Valley in central California. Here this unit can be found in the Panoche Hills in the northern portion of the field area and the Tumey Hills in the southern portion of the field area. The Cima Sandstone resides within the 800m Moreno Formation that spans the Maastrichtian to the Danian. The Moreno Formation comprises four members, which are the Dosados Member, the Tierra Loma Member, the Marca Shale Member, and the Dos Palos Shale Member (of which the Cima Sandstone is an interbed). The Cima Sandstone contains numerous large carbonate mounds, concretions, and pavements, indicating paleoseep activity. The Cima Sandstone has never been studied in detail, but recent interest in sandstone injectites as well as interest in paleoseeps has prompted us to examine this interbed more carefully. The Cima is an immature sandstone composed primarily of quartz along with small amounts of micas and feldspars as well as varying amounts of glauconite. These minerals are generally cemented by carbonate but, occasionally, iron oxide cement is present locally. Much variation exists within the Cima Sandstone Lentil and we seek to characterize and understand this variation. One of the most obvious sources of variability is the thickness of the unit itself. The thickness ranges from near 60m in the northern Panoche Hills to only 9m in the Tumey Hills. Induration also varies noticeably, from well cemented in the north, to unconsolidated in the south. Similarly, the sandstone is grain-supported and houses some depositional structures in the northern outcrops but becomes largely matrix-supported and lacking bedding in the southern outcrops. Preliminary data suggests that proximity to carbonate concretions, fluid conduits, and underlying injectites may have some influence over grain size and sorting.

  6. Reservoir Characterization and Tectonic Settings of Ahwaz Sandstone Member of the Asmari Formation in the Zagros Mountain, SW of Iran

    Science.gov (United States)

    Adabi, M. H.; Sadeghi, A. D.; Hosseini, M.; Moalemi, A.; Lotfpour, A.; Khatibi Mehr, M.; Salehi, M.; Zohdi, A.; Jafarzadeh, M.

    2009-04-01

    The Ahwaz Sandstone Member of the Asmari Formation, the major oil reservoir in Zagros mountain, have been studied to understand the distribution, provenance, tectonic setting and reservoir characteristic of Ahwaz Sandstone intervals as an exploration target. This study was based on petrographic and geochemical analysis of 16 core samples from 13 oilfields in the Dezful Embayment zone, and 2 surface sections (Katula and Khami) in Izeh zone. Petrographic studies of 400 thin sections and geochemical analysis indicated that sandstones consist of quartzarenite (Khami surface section), sublitharenite ( Katula surface section) and subarkose (subsurface sections). The modal analysis of medium size and well sorted samples show a recycled orogen (Katula outcrop) and craton (Khami and subsurface sections) tectonic setting. The parent rocks for Ahwaz Sandstone, based on petrographic point counting suggest a low to medium grade metamorphic and plutonic source. Petrographic and grain size analysis indicate a shallow shoreline to barrier bar environments. Heavy minerals in sandstones have mostly plutonic source and abundance of stable heavy mineral, along with well rounded and high sphericity, support stable cratonic source for subsurface sections and Khami surface section. However, in Katula section, heavy minerals have metamorphic source. Facies map illustrated that siliciclastic sediments in Asmari Formation during Rupelian time comes from south-west and north west of the study area. During Chattian, sand distribution reaches to the maximum level and sediments arrived from south-west, north-west and also north-east of the study area. In Aquitanian, sandstones sourced from two areas of south-west and north-west. In Burdigalian stage, sandstone sourced only from south and south-west. These sandstones have limited distributions. Tectonic settings based on geochemical analysis, plotted on discrimination diagrams, suggest that passive continental margin. These sandstones were

  7. Chemical and physical hydrogeology of coal, mixed coal-sandstone and sandstone aquifers from coal-bearing formations in the Alberta Plains region, Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Lemay, T.G. [Alberta Geological Survey, Edmonton, AB (Canada)

    2003-09-01

    With the decline of conventional oil and gas reserves, natural gas from coal (NGC) is an unconventional gas resource that is receiving much attention from petroleum exploration and development companies in Alberta. Although the volume of the NGC resource is large, there are many challenges facing NGC development in Alberta, including technical and economic issues, land access, water disposal, water diversion and access to information. Exploration and development of NGC in Alberta is relatively new, therefore there is little baseline data on which to base regulatory strategies. Some important information gaps have been filled through water well sampling in coal, mixed coal-sandstone and sandstone aquifers throughout Alberta. Analyses focused on the chemical and physical characteristics aquifers in use for domestic or agricultural purposes. Aquifer depths were generally less than 100 metres. Samples collected from Paskapoo-Scollard Formation, Horseshoe Canyon Formation and Belly River Group aquifers exceed Canadian water quality guideline values with respect to pH, sodium, manganese, chloride, chromium, sulphate, phenols and total dissolved solids. Pump tests conducted within the aquifers indicate that the groundwater flow is complicated. Water quality will have to be carefully managed to ensure responsible disposal practices are followed. Future studies will focus on understanding the chemical and biological process that occur within the aquifers and the possible link between these processes and gas generation. Mitigation and disposal strategies for produced water will also be developed along with exploration strategies using information obtained from hydrogeologic studies. 254 refs., 182 tabs., 100 figs., 3 appendices.

  8. Quantifying the effect of squirt flow dispersion from compliant clay porosity in clay bearing sandstones

    DEFF Research Database (Denmark)

    Sørensen, Morten Kanne; Fabricius, Ida Lykke

    2013-01-01

    Compliant porosity in the form of cracks is known to cause significant attenuation and velocity dispersion through pore pressure gradients and consequent relaxation, dubbed squirt flow. Squirt flow from cracks vanish at high confining stress due to crack closing. Studies on clay bearing sandstones......, however, show high attenuation and velocity dispersion remaining at high confining stress. Such dispersion is proposed to be caused by pressure gradients induced by compliant porosity within clay inclusions. By modeling the response of two extreme systems we quantify the possible effects of such clay......-squirt flow on the bulk modulus of a clay bearing sandstone. The predicted magnitude of the clay-squirt effect on the bulk modulus is compared with experimental data. The clay-squirt effect is found to possibly account for a significant portion of the deviances from Gassmann fluid substitution in claybearing...

  9. Spatial distribution of epibenthic molluscs on a sandstone reef in the Northeast of Brazil

    Directory of Open Access Journals (Sweden)

    AS. Martinez

    Full Text Available The present study investigated the distribution and abundance of epibenthic molluscs and their feeding habits associated to substrate features (coverage and rugosity in a sandstone reef system in the Northeast of Brazil. Rugosity, low coral cover and high coverage of zoanthids and fleshy alga were the variables that influenced a low richness and high abundance of a few molluscan species in the reef habitat. The most abundant species were generalist carnivores, probably associated to a lesser offer and variability of resources in this type of reef system, when compared to the coral reefs. The results found in this study could reflect a normal characteristic of the molluscan community distribution in sandstone reefs, with low coral cover, or could indicate a degradation state of this habitat if it is compared to coral reefs, once that the significantly high coverage of fleshy alga has been recognized as a negative indicator of reef ecosystems health.

  10. Diagenetic and thermal evolution of Rotliegend sandstones from onshore Schleswig-Holstein

    Energy Technology Data Exchange (ETDEWEB)

    Schoener, R.; Gaupp, R. [Universitaet Jena, (Germany). Institut fuer Geowissenschaften

    2004-07-01

    The investigation of diagenetic processes in deeply buried Rotliegend sandstones, which are a major target of hydrocarbon exploration, is an important tool to understand fluid evolution and migration during basin subsidence. In the area of Schleswig-Holstein at the northern margin of the Central European Basin (CEB), relatively few deep wells have been drilled in past, compared to the intensely explored southern part of the basin. e.g. in the region north of Hannover. Concordantly, little is known about Rotliegend diagenesis in the subsurface of northernmost Germany. To examine the diagenetic evolution of Rotliegend sandstones in this area, core material from three deep exploration wells, which have been released within the DFG research program (SPP) 1135, were investigated in detail with petrographic and geochemical methods. The burial and thermal history was calculated using PetroMod 1D (IES Juelich, version 8). (orig.)

  11. Desalination of salt damaged Obernkirchen sandstone by an applied DC field

    DEFF Research Database (Denmark)

    Matyščák, Ondřej; Ottosen, Lisbeth M.; Rörig-Dalgaard, Inge

    2014-01-01

    as the outer surface was scaling due to salts.The focus of the work was on the effect of electrokinetic desalination for removal of unevenly distributed mixtures of salts. Previous reported studies were conducted with laboratory contaminated stones with single salts, which were relatively evenly distributed...... the treatment the water content was very low in the stones, between 1.3% and 2.1%. Electroosmotic water transport was observed in the clay poultices, however, there was no decrease of the water contents in the stones at the end of the experiments, so there was no indication of an electroosmotic effect......Soluble salts are considered as one of the most common causes for decay of building materials. In the present work, an electrokinetic method for desalination of sandstones from a historic warehouse was tested. The sandstones claddings were removed from the warehouse during a renovation action...

  12. Cathodoluminescence investigations on quartz cement in sandstones of Khabour Formation from Iraqi Kurdistan region, northern Iraq

    DEFF Research Database (Denmark)

    Omer, Muhamed Fakhri; Friis, Henrik

    The Ordovician deltaic to shallow marine Khabour Formation in Northern Iraq consists mainly of sandstone with minor siltstone and interbedded shale. The sandstones are pervasively cemented by quartz that resulted in very little preserved primary porosity. Cathodoluminescence and petrographic...... in silica supply which were classified as very early and early, derived from dissolved biogenic silica that precipitated as opal/microquartz, possibly pre-compactional and of non-luminescent quartz overgrowth type. This was followed by phases whose silica supply derived from pressure solution of quartz......, dissolution of feldspar, and hydrothermal fluids related to major thrust fault event. These successive quartz cement phases showed an increase in luminescence and the development of complicated zonation pattern in late-stage quartz cementation....

  13. Intercorrelation of capillary pressure derived parameters for sandstones of the Tortel Formation, Hungary

    Energy Technology Data Exchange (ETDEWEB)

    El Sayed, Abdel Moktader A. (Department of Geology, Faculty of Science, Ain Shams University, Cairo, (Egypt))

    1993-10-10

    Porosity, permeability and capillary pressure data of 50 sandstone core samples obtained from the Tortel Formation have been used to evaluate reservoir quality. Three types of both reservoir rocks and capillary curves have been outlined. However, various correlation charts have been constructed in order to delineate porosity, permeability, pore throat size, recovery efficiency, height above the free water level and capillary pressure at different water saturation values of the reservoir rock. The used capillary pressure techniques are typically favored for geological and engineering applications for the development of sandstone pay zones of the Tortel Formation. The obtained charts could be used for determination of the important formation parameters and enhancing methods for reservoir development

  14. Hydrophobization by Means of Nanotechnology on Greek Sandstones Used as Building Facades

    Directory of Open Access Journals (Sweden)

    Georgios Karagiannis

    2013-01-01

    Full Text Available Modern sustainable architecture indicates the use of local natural stones for building. Greek sandstones from Epirus (Demati, Greece, EN 12440 used as building facades meet aesthetic and have high mechanical properties, but the inevitable interaction between stone materials and natural or anthropogenic weathering factors controls the type, and extent of stone damages. In the present paper, samples of sandstone were treated with a conventional hydrophobic product and four solutions of the same product, enriched with nanosilica of different concentrations. The properties of the treated samples, such as porosity and pore size distribution, microstructure, static contact angle of a water droplet, and durability to deterioration cycles (freeze-thaw were recorded and conclusions were drawn. The research indicates the increased hydrophobic properties in nanosilica solutions but also the optimum content in nanoparticles that provides hydrophobicity without altering the properties of the stone.

  15. Geology and petrophysical characterization of the Ferron Sandstone for 3-D simulation of a fluvial-deltaic reservoir. Annual report, October 1, 1996--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Chidsey, T.C. Jr.; Anderson, P.B.; Morris, T.H.; Dewey, J.A. Jr.; Mattson, A.; Foster, C.B.; Snelgrove, S.H.; Ryer, T.A.

    1998-05-01

    The objective of the Ferron Sandstone (Utah) project is to develop a comprehensive, interdisciplinary, quantitative characterization of a fluvial-deltaic reservoir to allow realistic interwell and reservoir-scale models to be developed for improved oil-field development in similar reservoirs world-wide. Both new and existing data is being integrated into a 3-D model of spatial variations in porosity, storativity, and tensorial rock permeability at a scale appropriate for inter-well to regional-scale reservoir simulation. Simulation results could improve reservoir management through proper infill and extension drilling strategies, reduction of economic risks, increased recovery from existing oil fields, and more reliable reserve calculations. The project is divided into four tasks: (1) regional stratigraphic analysis, (2) case studies, (3) reservoirs models, and (4) field-scale evaluation of exploration strategies. The primary objective of the regional stratigraphic analysis is to provide a more detailed interpretation of the stratigraphy and gross reservoir characteristics of the Ferron Sandstone as exposed in outcrop. The primary objective of the case-studies work is to develop a detailed geological and petrophysical characterization, at well-sweep scale or smaller, of the primary reservoir lithofacies typically found in a fluvial-dominated deltaic reservoir. Work on tasks 3 and 4 consisted of developing two- and three-dimensional reservoir models at various scales. The bulk of the work on these tasks is being completed primarily during the last year of the project, and is incorporating the data and results of the regional stratigraphic analysis and case-studies tasks.

  16. Case study - Dynamic pressure-limited capacity and costs of CO2 storage in the Mount Simon sandstone

    Science.gov (United States)

    Anderson, Steven T.; Jahediesfanjani, Hossein

    2017-01-01

    Widespread deployment of carbon capture and storage (CCS) is likely necessary to be able to satisfy baseload electricity demand, to maintain diversity in the energy mix, and to achieve climate and other objectives at the lowest cost. If all of the carbon dioxide (CO2) emissions from stationary sources (such as fossil-fuel burning power plants, and other industrial plants) in the United States needed to be captured and stored, it could be possible to store only a small fraction of this CO2 in oil and natural gas reservoirs, including as a result of CO2 utilization for enhanced oil recovery. The vast majority would have to be stored in saline-filled reservoirs (Dahowski et al., 2005). Given a lack of long-term commercial-scale CCS projects, there is considerable uncertainty in the risks, dynamic capacity, and their cost implications for geologic storage of CO2. Pressure buildup in the storage reservoir is expected to be a primary source of risk associated with CO2 storage, and could severely limit CO2 injection rates (dynamic storage capacities). Most cost estimates for commercial-scale deployment of CCS estimate CO2 storage costs under assumed availability of a theoretical capacity to store tens, hundreds, or even thousands of gigatons of CO2, without considering geologic heterogeneities, pressure limitations, or the time dimension. This could lead to underestimation of the costs of CO2 storage (Anderson, 2017). This paper considers the impacts of pressure limitations and geologic heterogeneity on the dynamic CO2 storage capacity and storage (injection) costs. In the U.S. Geological Survey (USGS)’s National Assessment of Geologic CO2 Storage Resources (USGS, 2013), the mean estimate of the theoretical storage capacity in the Mount Simon Sandstone was about 94 billion metric tons of CO2. However, our results suggest that the pressure-limited capacity after 50 years of injection could be only about 4% of the theoretical geologic storage capacity in this formation

  17. Note on the importance of hydrocarbon fill for reservoir quality prediction in sandstones

    OpenAIRE

    Marchand, A.M.E.; Smalley, P. C.; Haszeldine, R.S.; Fallick, A. E.

    2002-01-01

    Oil emplacement retarded the rate of quartz cementation in the Brae Formation deep-water sandstone reservoirs of the Miller and Kingfisher fields (United Kingdom North Sea), thus preserving porosity despite the rocks' being buried to depths of 4 km and 120degreesC. Quartz precipitation rates were reduced by at least two orders of magnitude in the oil legs relative to the water legs. Important contrasts in quartz cement abundances and porosities have emerged between the oil and water legs wher...

  18. Facies-controlled fluid migration patterns and subsequent reservoir collapse by depressurization - the Entrada Sandstone, Utah

    Science.gov (United States)

    Sundal, A.; Skurtveit, E.; Midtkandal, I.; Hope, I.; Larsen, E.; Kristensen, R. S.; Braathen, A.

    2016-12-01

    The thick and laterally extensive Middle Jurassic Entrada Sandstone forms a regionally significant reservoir both in the subsurface and as outcrops in Utah. Individual layers of fluvial sandstone within otherwise fine-grained aeolian dunes and silty inter-dune deposits of the Entrada Earthy Member are of particular interest as CO2 reservoir analogs to study injectivity, reservoir-caprock interaction and bypass systems. Detailed mapping of facies and deformation structures, including petrographic studies and core plug tests, show significant rock property contrasts between layers of different sedimentary facies. Beds representing fluvial facies appear as white, medium-grained, well-sorted and cross-stratified sandstone, displaying high porosity, high micro-scale permeability, low tensile strength, and low seismic velocity. Subsequent to deposition, these beds were structurally deformed and contain a dense network of deformation bands, especially in proximity to faults and injectites. Over- and underlying low-permeability layers of inter-dune aeolian facies contain none or few deformation bands, display significantly higher rock strengths and high seismic velocities compared to the fluvial inter-beds. Permeable units between low-permeability layers are prone to become over-pressured during burial, and the establishment of fluid escape routes during regional tectonic events may have caused depressurization and selective collapse of weak layers. Through-cutting, vertical sand pipes display large clasts of stratified sandstone suspended in remobilized sand matrix, and may have served as permeable fluid conduits and pressure vents before becoming preferentially cemented and plugged. Bleached zones around faults and fractures throughout the succession indicate leakage and migration of reducing fluids. The fluvial beds are porous and would appear in wireline logs and seismic profiles as excellent reservoirs; whereas due to dense populations of deformation bands they may in

  19. A preliminary assessment of the building sandstone quarries on the Hopetoun Estates, West Lothian, Scotland

    OpenAIRE

    McMillan, A.A.

    2006-01-01

    This report sets out the observations made at the various quarry sites on the Hopetoun Estates, West Lothian, Scotland and comments on the current status of the quarries and their geological context and summarises knowledge of the historical use of stone from these sources. Based upon this reconnaissance the report offers preliminary opinion on the potential for reopening one or more sandstone quarries and possible options for open new workings.

  20. Evaluation of using Smart Water to enhance oil recovery from Norwegian Continental Shelf sandstone reservoirs.

    OpenAIRE

    Piotrowska, Natalia

    2016-01-01

    Master's thesis in Petroleum engineering. Recently, the scale of studies on smart water – one of EOR method - has increased. From decades, water flooding is one of the most used methods to increase oil recovery. However, more effective in sandstone reservoirs is injecting low salinity brine. Due to changing wettability, improved oil mobility in pores can be reached. The studies show, that the significant increase of oil recovery might be achieved. Main objective of the thesis is to answ...

  1. A New Multichelating Acid System for High-Temperature Sandstone Reservoirs

    Directory of Open Access Journals (Sweden)

    Nianyin Li

    2015-01-01

    Full Text Available Sandstone reservoir acidizing is a complex and heterogeneous acid-rock reaction process. If improper acid treatment is implemented, further damage can be induced instead of removing the initial plug, particularly in high-temperature sandstone reservoirs. An efficient acid system is the key to successful acid treatment. High-temperature sandstone treatment with conventional mud acid system faces problems including high acid-rock reaction rate, short acid effective distance, susceptibility to secondary damage, and serious corrosion to pipelines. In this paper, a new multichelating acid system has been developed to overcome these shortcomings. The acid system is composed of ternary weak acid, organic phosphonic chelating agent, anionic polycarboxylic acid chelating dispersant, fluoride, and other assisted additives. Hydrogen ion slowly released by multistage ionization in ternary weak acid and organic phosphonic within the system decreases the concentration of HF to achieve retardation. Chelating agent and chelating dispersant within the system inhibited anodic and cathodic reaction, respectively, to protect the metal from corrosion, while chelating dispersant has great chelating ability on iron ions, restricting the depolarization reaction of ferric ion and metal. The synergic effect of chelating agent and chelating dispersant removes sulfate scale precipitation and inhibits or decreases potential precipitation such as CaF2, silica gel, and fluosilicate. Mechanisms of retardation, corrosion-inhibition, and scale-removing features have been discussed and evaluated with laboratory tests. Test results indicate that this novel acid system has good overall performance, addressing the technical problems and improving the acidizing effect as well for high-temperature sandstone.

  2. Permeability estimation using nuclear magnetic resonance (NMR) and lateral logs in fractured tight sandstones

    Science.gov (United States)

    Qin, Z.

    2016-12-01

    Permeability of fracture-matrix system is an important but difficult to estimate parameter in evaluation and production in fractured tight sandstone reservoirs. Because nuclear magnetic resonance (NMR) logs cannot indicate fracture permeability, NMR can be used to obtain accurate matrix permeability in fractured tight sandstones. Considering lateral logs can be used to identify and evaluate fracture, thus the fracture permeability can be estimated using lateral logs. In the interval without fracture, the permeability of fracture-matrix system is equal to the matrix permeability; while in the only fracture permeable interval, it is equal to the fracture permeability. Considering the obtained matrix permeability from NMR logs may include the contribution of fracture porosity in fractured tight sandstones, the estimated matrix permeability and estimated fracture permeability have overlap. Thus the permeability of fracture-matrix system is not a simple summation of the estimated fracture permeability and the estimated matrix permeability. A new method is proposed to obtain consecutive permeability in fractured tight sandstones. In the method, we believe that the obtained fracture permeability from lateral logs contains the actual fracture permeability and the fracture porosity permeability, which is contributed from the fracture porosity in rock. After calculating fracture width by using the Faivre-Sibbit (F-S) model, the fracture porosity can be estimated. Based on the hydraulic flow unit (HFU) approach, the fracture porosity permeability can be calculated, and then the actual fracture permeability can be obtained. Thus the Permeability of fracture-matrix system is the summation of actual fracture permeability and the estimated matrix permeability. Compared with the simple summation in the field example, the method can be used to obtain more reliable permeability of fracture-matrix system.

  3. Numerical simulation of multi-dimensional NMR response in tight sandstone

    Science.gov (United States)

    Guo, Jiangfeng; Xie, Ranhong; Zou, Youlong; Ding, Yejiao

    2016-06-01

    Conventional logging methods have limitations in the evaluation of tight sandstone reservoirs. The multi-dimensional nuclear magnetic resonance (NMR) logging method has the advantage that it can simultaneously measure transverse relaxation time (T 2), longitudinal relaxation time (T 1) and diffusion coefficient (D). In this paper, we simulate NMR measurements of tight sandstone with different wettability and saturations by the random walk method and obtain the magnetization decays of Carr-Purcell-Meiboom-Gill pulse sequences with different wait times (TW) and echo spacings (TE) under a magnetic field gradient, resulting in D-T 2-T 1 maps by the multiple echo trains joint inversion method. We also study the effects of wettability, saturation, signal-to-noise ratio (SNR) of data and restricted diffusion on the D-T 2-T 1 maps in tight sandstone. The results show that with decreasing wetting fluid saturation, the surface relaxation rate of the wetting fluid gradually increases and the restricted diffusion phenomenon becomes more and more obvious, which leads to the wetting fluid signal moving along the direction of short relaxation and the direction of the diffusion coefficient decreasing in D-T 2-T 1 maps. Meanwhile, the non-wetting fluid position in D-T 2-T 1 maps does not change with saturation variation. With decreasing SNR, the ability to identify water and oil signals based on NMR maps gradually decreases. The wetting fluid D-T 1 and D-T 2 correlations in NMR diffusion-relaxation maps of tight sandstone are obtained through expanding the wetting fluid restricted diffusion models, and are further applied to recognize the wetting fluid in simulated D-T 2 maps and D-T 1 maps.

  4. Mineral Sequestration of Carbon Dixoide in a Sandstone-Shale System

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tianfu; Apps, John A.; Pruess, Karsten

    2004-07-09

    A conceptual model of CO2 injection in bedded sandstone-shale sequences has been developed using hydrogeologic properties and mineral compositions commonly encountered in Gulf Coast sediments. Numerical simulations were performed with the reactive fluid flow and geochemical transport code TOUGHREACT to analyze mass transfer between sandstone and shale layers and CO2 immobilization through carbonate precipitation. Results indicate that most CO2 sequestration occurs in the sandstone. The major CO2 trapping minerals are dawsonite and ankerite. The CO2 mineral-trapping capacity after 100,000 years reaches about 90 kg per cubic meter of the medium. The CO2 trapping capacity depends on primary mineral composition. Precipitation of siderite and ankerite requires Fe+2 supplied mainly by chlorite and some by hematite dissolution and reduction. Precipitation of dawsonite requires Na+ provided by oligoclase dissolution. The initial abundance of chlorite and oligoclase therefore affects the CO2 mineral trapping capacity. The sequestration time required depends on the kinetic rate of mineral dissolution and precipitation. Dawsonite reaction kinetics is not well understood, and sensitivity regarding the precipitation rate was examined. The addition of CO2 as secondary carbonates results in decreased porosity. The leaching of chemical constituents from the interior of the shale causes slightly increased porosity. The limited information currently available for the mineralogy of natural high-pressure CO2 gas reservoirs is also generally consistent with our simulation. The ''numerical experiments'' give a detailed understanding of the dynamic evolution of a sandstone-shale geochemical system.

  5. Investigation on Mechanical Behaviors of Sandstone with Two Preexisting Flaws under Triaxial Compression

    Science.gov (United States)

    Huang, Da; Gu, Dongming; Yang, Chao; Huang, Runqiu; Fu, Guoyang

    2016-02-01

    Triaxial compression experiments on sandstone samples with two preexisting closed non-overlapping flaws were performed to investigate the deformation and strength behaviors. Three types of preexisting closed flaw pair in sandstone samples, i.e., parallel low-dip (type B), parallel high-dip (type C), and composite high- and low-dip (type D), were considered as the typical arrangements of the non-overlapping crack pair. A general rule has been found that the arrangement of the flaw pair has greater impact on the rock deformation, strength, and crack coalescence pattern than the confining pressure (5-20 MPa). Experimental results showed that, compared with intact sandstone samples, the postpeak stress-strain curves of flawed samples distinctly demonstrate stress fluctuation. In particular, the unique prepeak stress-strain curves of the specimens with a low-dip flaw pair (type B) present oblique Z-shape with a double-peak stress. The stress for crack initiation σ ci, the critical stress of dilation σ cd, and the peak strength σ c of precracked sandstone samples are significantly lower than those of intact rock. The present numerical study, which is an extension of the test analysis, focuses on identifying the crack nature (tensile or shear) and coalescence process. These simulated crack coalescence patterns are in good agreement with the laboratory test results. The cracks of the precracked samples that contained flaws with small inclination angle (associated with either type B or type D) generally initiate at the inner flaw tips and eventually lead to simple direct shear coalescence. However, complex indirect shear coalescence appears in the model containing a steep preexisting flaw pair (associated with type B specimen), even though no coalescence occurs when σ 3 = 5 MPa.

  6. Sandstone columns of the 3rd Nile Cataract (Nubia, Northern Sudan)

    Czech Academy of Sciences Publication Activity Database

    Cílek, Václav; Adamovič, Jiří; Suková, L.

    2015-01-01

    Roč. 59, Supplement 1 (2015), s. 151-165 ISSN 0372-8854 Grant - others:Program interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100130902 Institutional support: RVO:67985831 Keywords : Nubian sandstone * columnar jointing * Voronoi fragmentation * 3rd Nile Cataract * Sudan Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.103, year: 2015

  7. Dual control of flow field heterogeneity and immobile porosity on non‐Fickian transport in Berea sandstone

    National Research Council Canada - National Science Library

    Gjetvaj, Filip; Russian, Anna; Gouze, Philippe; Dentz, Marco

    2015-01-01

    .... Here we investigate non‐Fickian transport using high‐resolution 3‐D X‐ray microtomographic images of Berea sandstone containing microporous cement with pore size below the setup resolution...

  8. Comparative study of models for predicting permeability from nuclear magnetic resonance (NMR) logs in two Chinese tight sandstone reservoirs

    Science.gov (United States)

    Xiao, Liang; Liu, Xiao-Peng; Zou, Chang-Chun; Hu, Xiao-Xin; Mao, Zhi-Qiang; Shi, Yu-Jiang; Guo, Hao-Peng; Li, Gao-Ren

    2014-02-01

    Based on the analysis of mercury injection capillary pressure (MICP) and nuclear magnetic resonance (NMR) experimental data for core plugs, which were drilled from two Chinese tight sandstone reservoirs, permeability prediction models, such as the classical SDR, Timur-Coates, the Swanson parameter, the Capillary Parachor, the R10 and R35 models, are calibrated to estimating permeabilities from field NMR logs, and the applicabilities of these permeability prediction models are compared. The processing results of several field examples show that the SDR model is unavailable in tight sandstone reservoirs. The Timur-Coates model is effective once the optimal T 2cutoff can be acquired to accurately calculate FFI and BVI from field NMR logs. The Swanson parameter model and the Capillary Parachor model are not always available in tight sandstone reservoirs. The R35 based model cannot effectively work in tight sandstone reservoirs, while the R10 based model is optimal in permeability prediction.

  9. Characterization of application of acu sandstone in ceramic mass; Caracterizacao da aplicacao do arenito acu na massa ceramica

    Energy Technology Data Exchange (ETDEWEB)

    Nobrega, L.F.P.M.; Souza, M.M.; Gomes, Y.S.; Fernandes, D.L., E-mail: junior.luiz09@hotmail.com [Universidade Federal do Rio Grande do Norte (DIAREN/UFRN), Natal, RN (Brazil). Laboratorio de Processamento Mineral e Residuo

    2016-07-01

    The sandstone is a sedimentary rock formed mainly by quartz grains. In Rio Grande do Norte, there is the Potiguar Basin with the Jandaira and Acu Formations. The latter consists of thick layers of whitish-colored sandstones. It stands out as a water storage facility in the state, but it is also used for building aggregates. This article aimed at the use of the sandstone of this formation in the ceramic mass for coating. Initially, the material was sampled. It went through the comminution process to achieve the required granulometry. After this, three formulations were made to incorporate this new material into the traditional ones. The methods were performed according to ISO 13816. After sintering at 1200 °C, the specimens were subjected to the physical tests. A positive result was obtained for the use of the Acu sandstone in low concentrations. It is clear, therefore, its use in ceramics for coating.

  10. Formation factor in Bentheimer and Fontainebleau sandstones: Theory compared with pore-scale numerical simulations

    Science.gov (United States)

    Ghanbarian, Behzad; Berg, Carl F.

    2017-09-01

    Accurate quantification of formation resistivity factor F (also called formation factor) provides useful insight into connectivity and pore space topology in fully saturated porous media. In particular the formation factor has been extensively used to estimate permeability in reservoir rocks. One of the widely applied models to estimate F is Archie's law (F = ϕ- m in which ϕ is total porosity and m is cementation exponent) that is known to be valid in rocks with negligible clay content, such as clean sandstones. In this study we compare formation factors determined by percolation and effective-medium theories as well as Archie's law with numerical simulations of electrical resistivity on digital rock models. These digital models represent Bentheimer and Fontainebleau sandstones and are derived either by reconstruction or directly from micro-tomographic images. Results show that the universal quadratic power law from percolation theory accurately estimates the calculated formation factor values in network models over the entire range of porosity. However, it crosses over to the linear scaling from the effective-medium approximation at the porosity of 0.75 in grid models. We also show that the effect of critical porosity, disregarded in Archie's law, is nontrivial, and the Archie model inaccurately estimates the formation factor in low-porosity homogeneous sandstones.

  11. Intersecting faults and sandstone stratigraphy at the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Vonder Haar, S.; Howard, J.H.

    1980-02-01

    The northwest-southeast trending Cerro Prieto fault is part of a major regional lineament that extends into Sonaro and has characteristics of both a wrench fault and an oceanic transform fault. The distribution of lithologies and temperature within the field was studied by comparing data from well cuttings, cores, well logs, and geochemical analyses. Across the earliest developed portion of the field, in particular along a 1.25-km northeast-southwest section from well M-9 to M-10, interesting correlations emerge that indicate a relationship among lithology, microfracturing, and temperature distribution. In the upper portion of Reservoir A of this stratigraphic section, between 1200 and 1400 m, the percentage of sandstones ranges from 20 to 55. Temperatures are 225/sup 0/ to 275/sup 0/C based on well logs, calcite isotope maxima, and Na-K-Ca indices. The study shows that an isothermal high in this vicinity corresponds to the lowest total percentage of sandstones. Scanning electron microphotographs of well cores and cuttings from sandstone and shale units reveal clogging, mineral dissolution, and mineral precipitation along microfractures. The working hypothesis is that these sandy shale and siltstone facies are most amenable to increased microfracturing and, in turn, such microfracturing allows for higher temperature fluid to rise to shallower depths in the reservoir.

  12. Multi-scale nitrate transport in a sandstone aquifer system under intensive agriculture

    Science.gov (United States)

    Paradis, Daniel; Ballard, Jean-Marc; Lefebvre, René; Savard, Martine M.

    2017-09-01

    Nitrate transport in heterogeneous bedrock aquifers is influenced by mechanisms that operate at different spatial and temporal scales. To understand these mechanisms in a fractured sandstone aquifer with high porosity, a groundwater-flow and nitrate transport model—reproducing multiple hydraulic and chemical targets—was developed to explain the actual nitrate contamination observed in groundwater and surface water in a study area on Prince Edward Island, Canada. Simulations show that nitrate is leached to the aquifer year-round, with 61% coming from untransformed and transformed organic sources originating from fertilizers and manure. This nitrate reaches the more permeable shallow aquifer through fractures in weathered sandstone that represent only 1% of the total porosity (17%). Some of the nitrate reaches the underlying aquifer, which is less active in terms of groundwater flow, but most of it is drained to the main river. The river-water quality is controlled by the nitrate input from the shallow aquifer. Groundwater in the underlying aquifer, which has long residence times, is also largely influenced by the diffusion of nitrate in the porous sandstone matrix. Consequently, following a change of fertilizer application practices, water quality in domestic wells and the river would change rapidly due to the level of nitrate found in fractures, but a lag time of up to 20 years would be necessary to reach a steady level due to diffusion. This demonstrates the importance of understanding nitrate transport mechanisms when designing effective agricultural and water management plans to improve water quality.

  13. Experimental Investigation of Crack Extension Patterns in Hydraulic Fracturing with Shale, Sandstone and Granite Cores

    Directory of Open Access Journals (Sweden)

    Jianming He

    2016-12-01

    Full Text Available Hydraulic fracturing is an important method of reservoir stimulation in the exploitation of geothermal resources, and conventional and unconventional oil and gas resources. In this article, hydraulic fracturing experiments with shale, sandstone cores (from southern Sichuan Basin, and granite cores (from Inner Mongolia were conducted to investigate the different hydraulic fracture extension patterns in these three reservoir rocks. The different reactions between reservoir lithology and pump pressure can be reflected by the pump pressure monitoring curves of hydraulic fracture experiments. An X-ray computer tomography (CT scanner was employed to obtain the spatial distribution of hydraulic fractures in fractured shale, sandstone, and granite cores. From the microscopic and macroscopic observation of hydraulic fractures, different extension patterns of the hydraulic fracture can be analyzed. In fractured sandstone, symmetrical hydraulic fracture morphology could be formed, while some micro cracks were also induced near the injection hole. Although the macroscopic cracks in fractured granite cores are barely observed by naked eye, the results of X-ray CT scanning obviously show the morphology of hydraulic fractures. It is indicated that the typical bedding planes well developed in shale formation play an important role in the propagation of hydraulic fractures in shale cores. The results also demonstrated that heterogeneity influenced the pathway of the hydraulic fracture in granite cores.

  14. Mixed-Mode Fracture Behavior and Related Surface Topography Feature of a Typical Sandstone

    Science.gov (United States)

    Ren, L.; Xie, L. Z.; Xie, H. P.; Ai, T.; He, B.

    2016-08-01

    The geo-mechanical properties of reservoirs, especially the morphology of the rock surface and the fracture properties of rocks, are of great importance in the modeling and simulation of hydraulic processes. To better understand these fundamental issues, five groups of mixed-mode fracture tests were conducted on sandstone using edge-cracked semi-circular bend specimens. Accordingly, the fracture loads, growth paths and fracture surfaces for different initial mixities of the mixed-mode loadings from pure mode I to pure mode II were then determined. A surface topography measurement for each rough fracture surface was conducted using a laser profilometer, and the fractal properties of these surfaces were then investigated. The fracture path evolution mechanism was also investigated via optical microscopy. Moreover, the mixed-mode fracture strength envelope and the crack propagation trajectories of sandstone were theoretically modeled using three widely accepted fracture criteria (i.e., the MTS, MSED and MERR criterions). The published test results in Hasanpour and Choupani (World Acad Sci Eng Tech 41:764-769, 2008) for limestone were also theoretically investigated to further examine the effectiveness of the above fracture criteria. However, none of these criteria could accurately predict the fracture envelopes of both sandstone and limestone. To better estimate the fracture strength of mixed-mode fractures, an empirical maximum tensile stress (EMTS) criterion was proposed and found to achieve good agreement with the test results. Finally, a uniformly pressurized fracture model was simulated for low pressurization rates using this criterion.

  15. Multielement statistical evidence for uraniferous hydrothermal activity in sandstones overlying the Phoenix uranium deposit, Athabasca Basin, Canada

    Science.gov (United States)

    Chen, Shishi; Hattori, Keiko; Grunsky, Eric C.

    2017-07-01

    The Phoenix U deposit, with indicated resources of 70.2 M lb U3O8, occurs along the unconformity between the Proterozoic Athabasca Group sandstones and the crystalline basement rocks. Principal component analysis (PCA) is applied to the compositions of sandstones overlying the deposit. Among PCs, PC1 accounts for the largest variability of U and shows a positive association of U with rare earth elements (REEs) + Y + Cu + B + Na + Mg + Ni + Be. The evidence suggests that U was dispersed into sandstones together with these elements during the uraniferous hydrothermal activity. Uranium shows an inverse association with Zr, Hf, Th, Fe, and Ti. Since they are common in detrital heavy minerals, such heavy minerals are not the major host of U. The elements positively associated with U are high in concentrations above the deposit, forming a "chimney-like" or "hump-like" distribution in a vertical section. Their enrichment patterns are explained by the ascent of basement fluids through faults to sandstones and the circulation of basinal fluids around the deposit. The Pb isotope compositions of whole rocks are similar to expected values calculated from the concentrations of U, Th, and Pb except for sandstones close to the deposit. The data suggest that in situ decay of U and Th is responsible for the Pb isotope compositions of most sandstones and that highly radiogenic Pb dispersed from the deposit to the proximal sandstones long after the mineralization. This secondary dispersion is captured in PC8, which has low eigenvalue. The data suggests that the secondary dispersion has minor effect on the overall lithogeochemistry of sandstones.

  16. Developing a future repairs strategy for a sandstone city : a petrographic investigation of building stone in Glasgow, Scotland

    OpenAIRE

    Hyslop, Ewan K.; Albornoz-Parra, Luis

    2009-01-01

    Glasgow is the largest city in Scotland, and has some of the finest historic stone architecture in the United Kingdom. All the building stone quarries in the Glasgow area are closed and stone for repairs is now imported. Six types of ‘blonde’ sandstone and four types of ‘red’ sandstone have been identified from petrographic analysis of 126 samples from traditional buildings throughout the city. Currently available stone types from active quarries have been identified which have similar charac...

  17. PETROFACIES CHARACTERISTICS OF THE SANDSTONES OF THE UPPER MIOCENELOWER PLIOCENE AGED IN THE ULUMUHSİNE-TATKÖY (KONYA AREA

    Directory of Open Access Journals (Sweden)

    A. Müjdat ÖZKAN

    2000-03-01

    Full Text Available In the study area, Upper Miocene-Lower Pliocene aged Ulumuhsine formation, was formed in a shallow, open lake and river environment. The lithologies of this formation are thin-medium bedded, laminated and fossil rich limestone, thin-thick bedded mudstone, thin-thick bedded marl, thin-thick bedded dolomite with stromatolite interbedded limestone, tuffite, chert bands and coal-rich levels. In addition, it includes conglomerates and sandstones of underwater distrubution channels in lacustrine, and channel and bar sediments in stream environments. Red, gray, rarely green colored sandstones are thin-thick bedded, and in some levels well sorting, in some levels proorly sorting. They present sedimentary structures, as graded, herringbone cross-bedding, symmetric ripple-marks, and laminate. Sandstones are named lithic arenite and lithic graywacke and litharenite, feldspathic litharenite and sublithic arenite. These sandstones are rich rock fragments and quartzs, in addition they contain plagioclase, biotite, muskovite, opaque mineral and epidote. Binding materials of sandstones are mainly calcite cements and clay matrix, and iron oxide cement in little amount. From the mineralogical and textural point of view. As a tectonic environment, the main source of sandstones are recycled orogen (thrust, collision and land uplift and recyded lithic fragments.

  18. Wettability alteration of sandstones by silica nanoparticle dispersions in light and heavy crude oil

    Science.gov (United States)

    Huibers, Britta M. J.; Pales, Ashley R.; Bai, Lingyun; Li, Chunyan; Mu, Linlin; Ladner, David; Daigle, Hugh; Darnault, Christophe J. G.

    2017-09-01

    Unlike conventional oil production methods, enhanced oil recovery (EOR) processes can recover most oil products from the reservoir. One method, known as wettability alteration, changes the hydrophilicity of the reservoir rock via decreased surface interactions with crude oils. The mitigation of these attractive forces enhances petroleum extraction and increases the accessibility of previously inaccessible rock deposits. In this work, silica nanoparticles (NPs) have been used to alter the wettability of two sandstone surfaces, Berea and Boise. Changes in wettability were assessed by measuring the contact angle and interfacial tension of different systems. The silica NPs were suspended in brine and a combined solution of brine and the Tween®20 nonionic surfactant at concentrations of 0, 0.001, and 0.01 wt% NP with both light and heavy crude oil. The stability of the different nanofluids was characterized by the size, zeta potential, and sedimentation of the particles in suspension. Unlike the NPs, the surfactant had a greater effect on the interfacial tension by influencing the liquid-liquid interactions. The introduction of the surfactant decreased the interfacial tension by 57 and 43% for light and heavy crude oil samples, respectively. Imaging and measurements of the contact angle were used to assess the surface-liquid interactions and to characterize the wettability of the different systems. The images reflect that the contact angle increased with the addition of NPs for both sandstone and oil types. The contact angle in the light crude oil sample was most affected by the addition of 0.001 wt% NP, which altered both sandstones' wettability. Increases in contact angle approached 101.6% between 0 and 0.001 wt% NPs with light oil on the Berea sandstone. The contact angle however remained relatively unaffected by addition of higher NP concentrations, thus indicating that low NP concentrations can effectively be used for enhancing crude oil recovery. While the

  19. Mechanical stratigraphy of deep-water sandstones: insights from a multisciplinary field and laboratory study

    Science.gov (United States)

    Agosta, Fabrizio; di Celma, Claudio; Tondi, Emanuele; Corradetti, Amerigo; Cantalamessa, Gino

    2010-05-01

    Turbidite sandstones found in deep-water fold-and-thrust belts are increasingly exploited as hydrocarbon reservoirs. Within these rocks, the fluid flow is profoundly affected by the complex interaction between primary sedimentological and stratigraphic attributes (i.e, facies, layering, reservoir quality, stacking patterns, bed connectivity and lateral extent) and fracture characteristics (i.e., length, spacing, distribution, orientation, connectivity). Unfortunately, most of these features are at, or below, the resolution of conventional seismic datasets and, for this reason, their identification and localization represent one of the fundamental challenges facing exploration, appraisal and production of the sandstone reservoirs. In this respect, whereas considerable effort has been afforded to a characterization of the sedimentological and stratigraphic aspects of sandstones, detailed analysis of fractures in this type of successions has received significantly less attention. In this work, we combine field and laboratory analyses to assess the possible mechanical control exerted by the rock properties (grain size, intergranualr porosity, and Young modulus), as well as the influence of bed thickness, on joint density in turbidite sandstones. Joints are mode-I fractures occurring parallel to the greatest principle stress axis, which solve opening displacement and do not show evidence of shearing and enhance the values of total porosity forming preferential hydraulic conduits for fluid flow. Within layered rocks, commonly, joints form perpendicular to bedding due to overburden or exhumation. The empirical relation between joint spacing and bed thickness, documented in the field by many authors, has been mechanically related to the stress perturbation taking place around joints during their formation. Furthermore, close correlations between joint density and rock properties have been already established. In this present contribution, we focus on the bed

  20. Particle Size Distrbution in an Experimental Hypervelocity Impact on Dry Sandstone.

    Science.gov (United States)

    Buhl, Elmar; Poelchau, Michael H.; Deutsch, Alex; Kenkmann, Thomas; Dresen, Georg

    2013-04-01

    The particle size distribution (PSD) is a frequently used parameter to describe the deformation-induced fragmentation of fault rocks. It has been shown that resulting particle sizes may be described by a power law (fractal) size distribution: N(d) ~ dD where N(d) is the number of particles larger than diameter d, and D is the D-value. PSDs reported for impact deformation are still very few. D-values for natural and experimental impacts have been reported to range between 1.2-1.8 and 1.4-1.7, respectively. Here we show the systematic distribution of the PSD in the subsurface of an experimental impact crater. The investigated experiment was performed in the framework of the MEMIN project [1]. A 20 cm cube of quartz-rich sandstone (Seeberger Sandstein) was impacted by a 2.5 mm steel sphere at 4.8 km/s, producing a crater of 5.76 cm diameter and 11.0 mm depth [2]. For sample preparation the crater was impregnated with epoxy and the block was bisected. Thin sections were prepared from the crater sub-surface. Backscattered electron (BSE) micro-analysis was conducted by means of a Zeiss Leo 1525 Scanning Electron Microscope. A succession of 20 images (400x magnification) with increasing distance from the crater floor was analyzed. The image analysis software JMicrovision was used for automated object extraction. Area and perimeter of all detected particles were exported and used for PSD analysis. The obtained PSD were fit with a linear function in a log-log plot over at least one order of magnitude in diameter indicating that the PSD follows a power law relationship N(d) ~ dD. The distinct modes of deformation in the crater sub-surface [3] are closely linked to the fracture pattern and thus with the D-value. As expected, comminution was most effective closest to the crater floor. The highest D-value of 1.74 was found at a depth of 0.26-1.07 mm beneath the crater floor. Thus the largest fraction of fine material is situated in there. With growing distance the D-values drop

  1. Use of seasonal trend decomposition to understand groundwater behaviour in the Permo-Triassic Sandstone aquifer, Eden Valley, UK

    Science.gov (United States)

    Lafare, Antoine E. A.; Peach, Denis W.; Hughes, Andrew G.

    2016-02-01

    The daily groundwater level (GWL) response in the Permo-Triassic Sandstone aquifers in the Eden Valley, England (UK), has been studied using the seasonal trend decomposition by LOESS (STL) technique. The hydrographs from 18 boreholes in the Permo-Triassic Sandstone were decomposed into three components: seasonality, general trend and remainder. The decomposition was analysed first visually, then using tools involving a variance ratio, time-series hierarchical clustering and correlation analysis. Differences and similarities in decomposition pattern were explained using the physical and hydrogeological information associated with each borehole. The Penrith Sandstone exhibits vertical and horizontal heterogeneity, whereas the more homogeneous St Bees Sandstone groundwater hydrographs characterize a well-identified seasonality; however, exceptions can be identified. A stronger trend component is obtained in the silicified parts of the northern Penrith Sandstone, while the southern Penrith, containing Brockram (breccias) Formation, shows a greater relative variability of the seasonal component. Other boreholes drilled as shallow/deep pairs show differences in responses, revealing the potential vertical heterogeneities within the Penrith Sandstone. The differences in bedrock characteristics between and within the Penrith and St Bees Sandstone formations appear to influence the GWL response. The de-seasonalized and de-trended GWL time series were then used to characterize the response, for example in terms of memory effect (autocorrelation analysis). By applying the STL method, it is possible to analyse GWL hydrographs leading to better conceptual understanding of the groundwater flow. Thus, variation in groundwater response can be used to gain insight into the aquifer physical properties and understand differences in groundwater behaviour.

  2. The mineralogical composition of sandstone and its effect on sulphur dioxide deposition

    Directory of Open Access Journals (Sweden)

    Müller, Urs

    2008-06-01

    Full Text Available Air pollutants often accelerate stone deterioration in historical buildings and monuments in urban areas. The pollutants are themselves the products of fossil fuel combustion and intensive farming. While this trend seems to have been curbed by strict emission laws in the European Union, in most developing and emerging countries air pollution is an ongoing process due to increasing energy needs and vehicle traffic. Many factors condition natural stone behaviour with respect to gaseous pollutants. Two of the more prominent of such factors are the composition of the atmosphere and the type of stone. Due to their porosity, sandstones are particularly vulnerable to air pollutant attack. Many of the reactions between non-carbonaceous sandstones and these gases are not well understood, however. The present study aimed to acquire an understanding of the processes and factors governing sandstone behaviour when exposed to sulphur dioxide. Seven different sandstones from southern and eastern Germany were analyzed for the study. The binder composition of the stones varied significantly. They also exhibited completely different behaviour in connection with SO2 sorption. Interestingly, while the amount of SO2 deposited was unrelated to the specific surface area of the sandstones, this parameter was closely correlated to the iron oxide content. Iron oxide phases are believed to act as a catalyst in the oxidation of SO2 to SO3. The type and amount of clay mineral, in turn, was found to have no significant impact on initial SO2 deposition in sandstones.Los contaminantes atmosféricos son con frecuencia responsables de la aceleración de la degradación de la piedra en los edificios y monumentos históricos de las zonas urbanas. Los contaminantes en sí son productos de reacción procedentes de la combustión de los hidrocarburos y de la agricultura intensiva. Dentro de la Comunidad Europea, el avance parece haberse ralentizado mediante restrictivas leyes sobre

  3. Rockfall monitoring of a poorly consolidated marly sandstone cliff by TLS and IR thermography

    Science.gov (United States)

    Lefeuvre, Caroline; Guérin, Antoine; Carrea, Dario; Derron, Marc-Henri; Jaboyedoff, Michel

    2017-04-01

    The study area of La Cornalle (Vaud, Switzerland) is a 40 m high south-west facing cliff which is also part of a larger landslide (Bersier 1975 ; Parriaux, 1998). The cliff is formed by an alternation of marls and sandstones. The thicknesses of sandstone layers range from 0.5 to 4 meters. The rockfall activity of this cliff is high, with an average of one event per day. The aim of this study is to better understand the links between rockfall activity, cliff's structures, and weather and thermal conditions. The 3D surface evolution of the Cornalle cliff is monitored approximately every month since September 2012 using a Terrestrial Laser Scanning (TLS) data in order to get a monthly inventory of rockfall events. Since November 2013, a weather station located 150 meters away from the cliff collects data such as temperature, humidity, atmospheric pressure, rain and solar radiation every 15 minutes. Furthermore, we also fixed a thermic probe in the sandstone at 10 cm deep which measures temperature every 10 minutes. A detailed analysis has been performed during a short period (01/29/2016-04/08/2016) and pointed out a correlation between daily rainfall and rockfall. We found that a fall occurred the day or the day after a cumulative daily rainfall of at least 10 mm/day.In parallel to this monthly monitoring, the northwest part of La Cornalle cliff (the most active part) was monitored for 24 consecutive hours in July 2016 (from 12:30 to 12:30) using infrared thermography and crackmeters with a precision of 0.01mm. We collected a series of thermal pictures every 20 minutes, and measured the opening of a crack in sandstone layers every hour. We observed that marls are more affected by external changes of temperature than sandstones. Their surface temperature rises (resp. falls) more with an increase (resp. decrease) of external temperature than sandstones. Crackmeters measured an opening of the crack with an increase of the rock temperature and the opposite displacement

  4. Utilisation of Sand from Kaolin Washing for the Manufacture of Alkali-activated Artificial Sandstone

    Science.gov (United States)

    Vavro, Martin; Vavro, Leona; Mec, Pavel; Soucek, Kamil; Pticen, Frantisek; Reiterman, Pavel

    2017-04-01

    Sandstones represent a traditional natural stones which are widely used in Czech architecture and sculpture over a long time. Thanks to their relatively easy workability, sandstones provide a wide range of stone products and also represent a popular material for architectural and sculptural purposes. In the field of restoration of artworks, they are therefore often used for manufacturing stone statue copies originally made from the same or similar type of stone. Despite a relatively common and varied occurrence of natural sandstones, the method of the artificial stone facsimiles creation in the form of various cast elements is also often applied in restoration practice. The history of application of artificial stones in civil engineering and architecture goes back to the ancient times, i.e. to Roman antiquity and possibly up to the time of ancient Egypt. The lack of appropriate natural rock, suitable in the view of colour, grain size or texture is the main reason of manufacturing copies based on synthetic mixtures. The other reason is high financial costs to create a sculpture copy from natural materials. Mixtures made from white and/or grey cements, sands, carefully selected crushed stone or well graded natural gravels, and mineral coloring pigments or mixtures with acrylate, polyester, and epoxy resins binder are the most frequently used artificial materials for cast stone manufacturing. This paper aims to bring information about composition and properties of artificial sandstones made from alkali-activated binder mixtures based on metakaolin and granulated blast furnace slag. The filler of this artificial stone is represented by fine-grained sand generated during kaolin wet processing. Used sand is mainly formed by quartz, feldspars, micas (muscovite > biotite), residual kaolin, and to a lesser extent also by Fe oxyhydroxides ("limonite"), titanium dioxide mineral (probably anatase), and carbonate mineral unidentified in detail. Annual Czech production of this

  5. Chemical analysis of black crust on the Angkor sandstone at the Bayon temple, Cambodia

    Science.gov (United States)

    Song, Wonsuh; Oguchi, Chiaki; Waragai, Tetsuya

    2014-05-01

    The Angkor complex is the one of the greatest cultural heritages in the world. It is constructed in the early 12th century, designated as a world cultural heritage by UNESCO in 1992. The temples at the Angkor complex are mainly made of sandstone and laterite. However, due to the tropical climate, plants, lichens and various microorganisms are growing well on the rock surface. Black crusts are also easily found on the stone surface. The 21st technical session of the International Coordinating Committee for the Safeguarding and Development of the Historic Site of Angkor (ICC-Angkor) held in 2012 recommended that to preserve both the biofilms and the forest cover and to prohibit the biocides (chlorine-based) and organic biocides. However, there are many reports that lichens and microorganisms accelerate rock weathering. It is important to clarify that how the biofilm on the Angkor temples affect Angkor sandstones. We sampled Angkor sandstone covered by black crust at the Bayon temple, Angkor complex, and observed the section and the surface of the rock sample by using SEM. Surfaces of the samples are not polished in order to observe the original condition. The samples are coated with gold for 180 seconds. The depth of the black crust is up to 1 mm. Many filamentous materials were found on the black crust. Average energy-dispersive X-ray spectroscopy data of the five areas of ca. 20 μm ×15 μm in the black crusts shows that over 80 % of the filamentous materials are compounds of carbon. It seems that these materials are hyphae. The shape of the hypha is like a thread and its size is few μm in diameter and up to several centimeters in length. Black crusts are consisted of elements and compounds of carbon, Na, Mg, Al, Si, Cl, K, Ca, and Fe. Further research has to be done to find out the better and proper way of conservation for the Angkor complex.

  6. Discordant K-Ar and Young Exposure Dates for the Windjana Sandstone, Kimberley, Gale Crater, Mars

    Science.gov (United States)

    Vasconcelos, P. M.; Farley, K. A.; Malespin, C. A.; Mahaffy, P.; Ming, D.; McLennan, S. M.; Hurowitz, J. A.; Rice, Melissa S.

    2016-01-01

    K-Ar and noble gas surface exposure age measurements were carried out on the Windjana sandstone, Kimberley region, Gale Crater, Mars, by using the Sample Analysis at Mars instrument on the Curiosity rover. The sandstone is unusually rich in sanidine, as determined by CheMin X-ray diffraction, contributing to the high K2O concentration of 3.09 +/- 0.20 wt % measured by Alpha-Particle X-ray Spectrometer analysis. A sandstone aliquot heated to approximately 915 C yielded a K-Ar age of 627 +/- 50 Ma. Reheating this aliquot yielded no additional Ar. A second aliquot heated in the same way yielded a much higher K-Ar age of 1710 +/- 110 Ma. These data suggest incomplete Ar extraction from a rock with a K-Ar age older than 1710 Ma. Incomplete extraction at approximately 900 C is not surprising for a rock with a large fraction of K carried by Ar-retentive K-feldspar. Likely, variability in the exact temperature achieved by the sample from run to run, uncertainties in sample mass estimation, and possible mineral fractionation during transport and storage prior to analysis may contribute to these discrepant data. Cosmic ray exposure ages from He-3 and Ne-21 in the two aliquots are minimum values given the possibility of incomplete extraction. However, the general similarity between the He-3 (57 +/- 49 and 18 +/- 32 Ma, mean 30 Ma) and Ne-21 (2 +/- 32 and 83 +/- 24 Ma, mean 54 Ma) exposure ages provides no evidence for underextraction. The implied erosion rate at the Kimberley location is similar to that reported at the nearby Yellowknife Bay outcrop.

  7. Recognition of a fluvial facies in the Pacoota Sandstone and its implications for petroleum exploration

    Science.gov (United States)

    Deckelman, James A.

    A previously unrecognized fluvial facies is present in the Late Cambrian-Early Ordovician Pacoota Sandstone in the north-central and northwestern parts of the Amadeus Basin. This facies forms the base of the P3 unit and correlates directly with the primary oil and gas producing interval in the Pacoota Sandstone at the Mereenie Field. In order to distinguish this facies from overlying facies in the P3, it is proposed that the P3 be divided into a lower dominantly fluvial unit, the P3B, and an upper estuarine and shoreface unit, the P3A. Both units can be mapped for hundreds of kilometers at the surface and in the subsurface throughout the Mereenie Field and adjacent areas. The P3B is interpreted as a deposit that accumulated in a dominantly fluvial environment on the basis of: its locally erosional lower bounding surface; the absence of body fossils and ichnofossils; the lobate, wedge-shaped geometry of the unit; the subarkosic composition of the sandstone; the presence of pebble and cobble conflomerate; abundant early syngenetic hematite; abundant trough cross-sets up to 1.35 m thick; overturned cross-laminae; relatively abundant asymmetrical ripple marks; contorted stratification; beds in excess of 1 m in thickness; and its unimodal paleocurrent distribution. The P3B grades conformably into overlying estuarine and shoreface sediments of the P3A. Anagentic silicification is the most significant diagenetic event affecting the present lateral distribution of primary porosity in the P3B unit. Because the extent of anagenetic silificiation decreases southward, the potential for preservation of primary porosity is greatest near the southern depositional limit of the unit. Secondary porosity in the P3B formed by the dissolution of feldspar. Because the abundance of feldspar is inversely related to grainsize which decreases to the southeast, the potential for development of secondary porosity is greatest near the southeastern depositional limit of the unit.

  8. Blueberries on Earth and Mars: Correlations Between Concretions in Navajo Sandstone and Terra Meridiani on Mars.

    Science.gov (United States)

    Mahaney, W. C.; Milner, M. W.; Netoff, D.; Dohm, J.; Kalm, V.; Krinsley, D.; Sodhi, R. N.; Anderson, R. C.; Boccia, S.; Malloch, D.; Kapran, B.; Havics, A.

    2008-12-01

    Concretionary Fe-Mn-rich nodular authigenic constituents of Jurassic Navajo sandstone (moki marbles) bear a certain relationship to similar concretionary forms ('blueberries') observed on Mars. Their origin on Earth is considered to invoke variable redox conditions with underground fluids penetrating porous quartz-rich sandstone leading to precipitation of hematite and goethite-rich material from solution, generally forming around a central nucleus of fine particles of quartz and orthoclase, recently verified by XRD and SEM-EDS analyses. At the outer rim/inner nucleus boundary, bulbous lobes of fine-grained quartz often invade and fracture the outer rim armored matrix. The bulbous forms are interpreted to result from fluid explusion from the inner concretionary mass, a response to pressure changes accompanying overburden loading. Moki marbles, harder than enclosing rock, often weather out of in situ sandstone outcrops that form a surface lag deposit of varnished marbles that locally resemble desert pavement. The marbles appear morphologically similar to 'blueberries' identified on the martian surface in Terra Meridiani through the MER-1 Opportunity rover. On Earth, redox fluids responsible for the genesis of marbles may have emanated from deep in the crust (often influenced by magmatic processes). These fluids, cooling to ambient temperatures, may have played a role in the genesis of the cemented outer rim of the concretions. The low frequency of fungi filaments in the marbles, contrasts with a high occurrence in Fe-encrusted sands of the Navajo formation [1], indicating that microbial content is of secondary importance in marble genesis relative to the fluctuating influx of ambient groundwater. Nevertheless, the presence of filaments in terrestrial concretions hints at the possibility of discovering fossil/extant life on Mars, and thus should be considered as prime targets for future reconnaissance missions to Mars. 1] Mahaney, W.C., et al. (2004), Icarus, 171, 39-53.

  9. Early Cretaceous marine sediments of the Lower Saxony Basin. The Gildehaus Sandstone

    Energy Technology Data Exchange (ETDEWEB)

    Dellepiane, S.; Weiel, D. [Wintershall Holding GmbH, Barnstorf (Germany); Gerwert, D.; Mutterlose, J. [Bochum Univ. (Germany). Inst. fuer Geologie, Mineralogie und Geophysik

    2013-08-01

    During the Early Cretaceous (Berriasian - Aptian) the Lower Saxony Basin (LSB) formed the southernmost extension of the North Sea Basin. Sedimentation patterns of the LSB were controlled by divergent dextral shear movement causing differential subsidence related to early rifting in the North Sea. Up to 2000m of fine grained mudstones accumulated in the basin centre, while marginal marine, coarser grained siliciclastics were deposited along the western and southern margins of the LSB. The western marginal facies, outcropping along the Dutch-German border, is characterised by shallow marine sandstones of Valanginian - Hauterivian age. These units, which are separated by clay rich intervals, include the Bentheim Sdst., the Dichotomites Sdst., the Grenz Sdst., the Noricum Sdst. and the Gildehaus Sdst. These sandstones form a series of overall backstepping units, controlled by a main transgressive trend. Economically important are the Bentheim Sdst. and the Gildehaus Sdst., with a long oil producing history. The Bentheim Sdst. (early Valanginian) has been interpreted as an overall retrograding unit related to an incised valley infill with material mainly coming from the South. Tidal processes dominated the deposition of the Bentheim Sdst. The origin and genesis of the Gildehaus Sdst. (mid Hauterivian) is, however, less well understood. Here we present data from two wells drilled to the Gildehaus Sdst. (Emlichheim oil field) which provide evidence for a two fold subdivision of the unit. A well sorted massive quartz sandstone is followed by an interval composed of reworked coarse clastics of massflow origin. Micropalaeontological evidence suggests a fully marine, hemi-pelagic origin of the mud dominated matrix throughout the Gildehaus Sdst. These findings indicate a depositional environment quite different from that of the Bentheim Sdst. Short termed pulses of substantial input of clastic material from two different sources in the West to Southwest punctuated the overall

  10. Giant stromatolites and a supersurface in the Navajo Sandstone, Capitol Reef National Park, Utah

    Science.gov (United States)

    Eisenberg, Len

    2003-02-01

    At Capitol Reef National Park, Utah, 5-m-high stromatolites are present locally on interdune carbonate lenses in the Early Jurassic Navajo Sandstone. The stromatolites display both finely laminated and fenestral internal fabrics, and grew along south-facing interdune margins. These stromatolites formed during a high-water-table episode engendered by a dune-dammed paleodrainage in a stabilized Navajo erg. These stromatolites, and the thick interdune section associated with them, suggest a hiatus in erg accumulation and the presence of a super bounding surface.

  11. Low field NMR surface relaxivity studies of chalk and argillaceous sandstones

    DEFF Research Database (Denmark)

    Katika, Konstantina; Fordsmand, Henrik; Fabricius, Ida Lykke

    2017-01-01

    in studies related to the North Sea oil and gas reservoirs, since they cover a wide range of formations, ranging from homogeneous to inhomogeneous chalk, chloritic and quartz mineralogy. Comparison of T 2 distributions at Lamor frequency of 2 and 20 MHz at 40 °C shows that paramagnetic minerals in the Gorm...... the accuracy of predictions of petrophysical properties of various rocks with the use of NMR spectrometry. We perform laboratory transverse relaxation (T2) measurements on water saturated Gorm field chalk, Stevns Klint chalk, Solsort field greensand and Berea sandstone. These rocks are of particular interest...

  12. Ancient sandstone condition assessment in relation to degradation, cleaning and consolidation phenomena

    Science.gov (United States)

    Drdácký, Miloš; Frankeová, Dita; Slížková, Zuzana

    2015-04-01

    Non-invasive methods for assessing the state of historic stone types rely on measurement of their surface or subsurface characteristics, which are supposed to correlate with objective physical characteristics. Such measurements are influenced by surface conditions of stone, as well as by previous conservation treatments. The authors performed a comprehensive study of characteristics and behaviour of typical sandstone types present in the Charles' Bridge in Prague as a preparatory work for its diagnostic and restoration in order to understand the problem of a large, important, and non-homogeneous (from the material point of view) historic structure, that was intended for repair interventions. The study itself took advantage of the combination of non-invasive, or considerately destructive methods and fully destructive tests, because it was possible to use damaged sandstone blocks, which were extracted from a masonry rail of the bridge before replacement with new elements. Stone characteristics were studied on test specimens prepared from materials in various conditions and after various interventions. Seven types of sandstone were tested in nine sets (degraded surface layer with a crust, degraded surface layer after cleaning, and unweathered core material; all three without any consolidation treatment, and all three after consolidation with two products based on silicic acid ester - Funcosil 100 and 300). The paper will present only selected results of experiments and the most important conclusions taken from the tests and their comparison. During experimental work the following characteristics were investigated: bending strength, modulus of elasticity, ultrasonic velocity, micro-drilling resistance, water uptake, porosity, frost resistance, hydric dilation and thermal dilation. The degraded stone had a rather strong variation of its characteristics along the depth profile from the surface inside the stone ashlar. Therefore, the stone samples were prepared in a form

  13. A pterodactyloid pterosaur from the Upper Cretaceous Lapurr sandstone, West Turkana, Kenya.

    Science.gov (United States)

    O'Connor, Patrick M; Sertich, Joseph J W; Manthi, Fredrick K

    2011-03-01

    An isolated pterosaurian caudal cervical (~ postcervical) vertebra was recovered from the Upper Cretaceous Lapurr sandstone of West Turkana, northwestern Kenya. The vertebral centrum is short, wide, and dorsoventrally compressed. Although the specimen is lightly built similar to most pterosaurs, it is here referred to Pterodactyloidea and tentatively to the Azhdarchidae in that it lacks pneumatic features on both the centrum and neural arch. This represents one of the few pterosaurs recovered from the entirety of Afro-Arabia, the first pterosaur recovered from the Cretaceous of East Africa, and, significantly, a specimen that was recovered from fluvial deposits rather than the near-shore marine setting typical of most pterosaur discoveries.

  14. Biotic and abiotic anaerobic transformations of trichloroethene and cis-1,2-dichloroethene in fractured sandstone.

    Science.gov (United States)

    Darlington, Ramona; Lehmicke, Leo; Andrachek, Richard G; Freedman, David L

    2008-06-15

    A fractured sandstone aquifer at an industrial site in southern California is contaminated with trichloroethene (TCE) and cis-1,2-dichloroethene (cis-DCE) to depths in excess of 244 m. Field monitoring data suggest that TCE is undergoing reduction to cis-DCE and that additional attenuation is occurring. However, vinyl chloride (VC) and ethene have not been detected in significant amounts, so that if transformation is occurring, a process other than reductive dechlorination must be responsible. The objective of this study was to evaluate the occurrence of biotic and abiotic transformation processes at this site for TCE, cis-DCE, and VC. Anaerobic microcosms were constructed with site groundwater and sandstone core samples. 14C-labeled compounds were used to detect transformation products (e.g., CO2 and soluble products) that are not readily identifiable by headspace analysis. The microcosms confirmed the occurrence of biotic reduction of TCE to cis-DCE, driven by electron donor in the groundwater and/or sandstone. VC and ethene were not detected. Following incubation periods up to 22 months, the distribution of 14C indicated statistically significant transformation of [14C]TCE and [14C]cis-DCE in live microcosms, to as high as 10% 14CO2 from TCE and 20% 14CO2 from cis-DCE. In autoclaved microcosms, significant transformation of [14C]TCE and [14C]cis-DCE also occurred; although some 14CO2 accumulated, the predominant 14C product was soluble and could not be stripped by N2 from an acidic solution (referred to as nonstrippable residue, or NSR). Characterization of the NSR by high-performance liquid and ion chromatography identified glycolate, acetate, and formate as significant components. These results suggest that a combination of abiotic and biotic transformation processes is responsible for attenuation of TCE and cis-DCE in the fractured sandstone aquifer. Tracking the distribution of 14C during the microcosm study was essential for observing these phenomena.

  15. Dzhezkazgan and associated sandstone copper deposits of the Chu-Sarysu basin, Central Kazakhstan

    Science.gov (United States)

    Box, Stephen E.; Seltmann, Reimar; Zientek, Michael L.; Syusyura, Boris; Creaser, Robert A.; Dolgopolova, Alla

    2012-01-01

    Sandstone-hosted copper (sandstone Cu) deposits occur within a 200-km reach of the northern Chu-Sarysu basin of central Kazakhstan (Dzhezkazgan and Zhaman-Aibat deposits, and the Zhilandy group of deposits). The deposits consist of Cu sulfide minerals as intergranular cement and grain replacement in 10 ore-bearing members of sandstone and conglomerate within a 600- to 1,000-m thick Pennsylvanian fluvial red-bed sequence. Copper metal content of the deposits ranges from 22 million metric tons (Mt, Dzehzkazgan) to 0.13Mt (Karashoshak in the Zhilandy group), with average grades of 0.85 to 1.7% Cu and significant values for silver (Ag) and rhenium (Re). Broader zones of iron reduction (bleaching) of sandstones and conglomerates of the red-bed sequence extend over 10 km beyond each of the deposits along E-NE-trending anticlines, which began to form in the Pennsylvanian. The bleached zones and organic residues within them are remnants of ormer petroleum fluid accumulations trapped by these anticlines. Deposit sites along these F1anticlines are localized at and adjacent to the intersections of nearly orthogonal N-NW-trending F2synclines. These structural lows served to guide the flow of dense ore brines across the petroleum-bearing anticlines, resulting in ore sulfide precipitation where the two fluids mixed. The ore brine was sourced either from the overlying Early Permian lacustrine evaporitic basin, whose depocenter occurs between the major deposits, or from underlying Upper Devonian marine evaporites. Sulfur isotopes indicate biologic reduction of sulfate but do not resolve whether the sulfate was contributed from the brine or from the petroleum fluids. New Re-Os age dates of Cu sulfides from the Dzhezkazgan deposit indicate that mineralization took place between 299 to 309 Ma near the Pennsylvanian-Permian age boundary. At the Dzhezkazgan and some Zhilandy deposits, F2fold deformation continued after ore deposition. Copper orebodies in Lower Permian

  16. Study of Hydrogen and Oxygen and Its Reaction With Host Elements in Sandstone by Laser-Induced Breakdown Spectroscopy (LIBS)

    Science.gov (United States)

    Suyanto, Hery

    2017-05-01

    A study of hydrogen and oxygen and its reaction with host elements in a sandstone has been done by laser-induced breakdown spectroscopy (LIBS). The sandstone was irradiated by Nd-YAG laser (1064 nm, 7 ns) with varied energy of 60 mJ till 140 mJ in surrounding air gas pressure of 1 atm and produced plasma. The emission intensities of hydrogen H I 656.2 nm and oxygen O I 777.2 nm in the plasma were captured by HR 2500+ spectrometer and displayed in intensity as a function of wavelength. The data show that the emission intensities of hydrogen and oxygen increase with increasing laser energy at a gradient of 5.4 and 11.8 respectively every increasing laser energy of 20 mJ. To characterize the reaction process between hydrogen and oxygen with the host elements of the sandstone, a 0.2 ml demineralized water was dropped on the sandstone surface and was analyzed as a function of delay time reaction and temperature. The data show that the oxidation reaction between host elements and oxygen occurred after 25 minutes that the oxygen emission intensity increases and the hydrogen emission intensity decreases. Another data also show that the increasing temperature of sandstone until 80 C increased intermolecular bond between oxygen and host element and dehydrogenation took place after reaching this temperature

  17. Diagenesis and Fluid Flow Variability of Structural Heterogeneity Units in Tight Sandstone Carrier Beds of Dibei, Eastern Kuqa Depression

    Directory of Open Access Journals (Sweden)

    H. Shi

    2017-01-01

    Full Text Available Tight sand gas plays an important role in the supply of natural gas production. It has significance for predicting sweet spots to recognize the characteristics and forming of heterogeneity in tight sandstone carrier beds. Heterogeneity responsible for spatial structure, such as the combination and distribution of relatively homogeneous rock layers, is basically established by deposition and eodiagenesis that collectively affect the mesogenesis. We have investigated the structural heterogeneity units by petrofacies in tight sandstone carrier beds of Dibei, eastern Kuqa Depression, according to core, logging, and micropetrology. There are four types of main petrofacies, that is, tight compacted, tight carbonate-cemented, gas-bearing, and water-bearing sandstones. The brine-rock-hydrocarbon diagenesis changes of different heterogeneity structural units have been determined according to the pore bitumen, hydrocarbon inclusions, and quantitative grain fluorescence. Ductile grains or eogenetic calcite cements destroy the reservoir quality of tight compacted or tight carbonate-cemented sandstones. Rigid grains can resist mechanical compaction and oil emplacement before gas charging can inhibit diagenesis to preserve reservoir property of other sandstones. We propose that there is an inheritance relationship between the late gas and early oil migration pathways, which implies that the sweet spots develop in the reservoirs that experienced early oil emplacement.

  18. Performance of Surfactant Methyl Ester Sulphonate solution for Oil Well Stimulation in reservoir sandstone TJ Field

    Science.gov (United States)

    Eris, F. R.; Hambali, E.; Suryani, A.; Permadi, P.

    2017-05-01

    Asphaltene, paraffin, wax and sludge deposition, emulsion and water blocking are kinds ofprocess that results in a reduction of the fluid flow from the reservoir into formation which causes a decrease of oil wells productivity. Oil well Stimulation can be used as an alternative to solve oil well problems. Oil well stimulation technique requires applying of surfactant. Sodium Methyl Ester Sulphonate (SMES) of palm oil is an anionic surfactant derived from renewable natural resource that environmental friendly is one of potential surfactant types that can be used in oil well stimulation. This study was aimed at formulation SMES as well stimulation agent that can identify phase transitions to phase behavior in a brine-surfactant-oil system and altered the wettability of rock sandstone and limestone. Performance of SMES solution tested by thermal stability test, phase behavioral examination and rocks wettability test. The results showed that SMES solution (SMES 5% + xylene 5% in the diesel with addition of 1% NaCl at TJformation water and SMES 5% + xylene 5% in methyl ester with the addition of NaCl 1% in the TJ formation water) are surfactant that can maintain thermal stability, can mostly altered the wettability toward water-wet in sandstone reservoir, TJ Field.

  19. Full-scale laboratory drilling tests on sandstone and dolomite. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Black, A. D.; Green, S. J.; Rogers, L. A.

    1977-08-01

    Full-scale laboratory drilling experiments were performed under simulated downhole conditions to determine what effect changing various drilling parameters has on penetration rate. The two rock types, typical of deep oil and gas reservoirs, used for the tests were Colton Sandstone and Bonne Terre Dolomite. Drilling was performed with standard 7/sup 7///sub 8/ inch rotary insert bits and water base mud. The results showed the penetration rate to be strongly dependent on bit weight, rotary speed and borehole mud pressure. There was only a small dependence on mud flow rate. The drilling rate decreased rapidly with increasing borehole mud pressure for borehole pressures up to about 2,000 psi. Above this pressure, the borehole pressure and rotary speeds had a smaller effect on penetration rate. The penetration rate was then dependent mostly on the bit weight. Penetration rate per horsepower input was also shown to decrease at higher mud pressures and bit weights. The ratio of horizontal confining stress to axial overburden stress was maintained at 0.7 for simulated overburden stresses between 0 and 12,800 psi. For this simulated downhole stress state, the undrilled rock sample was within the elastic response range and the confining pressures were found to have only a small or negligible effect on the penetration rate. Visual examination of the bottomhole pattern of the rocks after simulated downhole drilling, however, revealed ductile chipping of the Sandstone, but more brittle behavior in the Dolomite.

  20. Full-scale laboratory drilling tests on sandstone and dolomite. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Black, A.D.; Green, S.J.; Rogers, L.A.

    1977-12-01

    Full-scale laboratory drilling experiments were performed under simulated downhole conditions to determine what effect changing various drilling parameters has on penetration rate. The two rock types, typical of deep oil and gas reservoirs, used for the tests were Colton Sandstone and Bonne Terre Dolomite. Drilling was performed with standard 7/sup 7///sub 8/ inch rotary insert bits and water base mud. The results showed the penetration rate to be strongly dependent on bit weight, rotary speed, and borehole mud pressure. There was only a small dependence on mud flow rate. The drilling rate decreased rapidly with increasing borehole mud pressure for borehole pressures up to about 2,000 psi. Above this pressure, the borehole pressure and rotary speeds had a smaller effect on penetration rate. The penetration rate was then dependent mostly on the bit weight. Penetration rate per horsepower input was also shown to decrease at higher mud pressures and bit weights. The ratio of horizontal confining stress to axial overburden stress was maintained at 0.7 for simulated overburden stresses between 0 and 12,800 psi. For this simulated downhole stress state, the undrilled rock sample was within the elastic response range and the confining pressures were found to have only a small or negligible effect on the penetration rate. Visual examination of the bottomhole pattern of the rocks after simulated downhole drilling, however, revealed ductile chipping of the Sandstone, but more brittle behavior in the Dolomite.

  1. The evolution of faults formed by shearing across joint zones in sandstone

    Science.gov (United States)

    Myers, Rodrick; Aydin, Atilla

    2004-05-01

    The evolution of strike-slip and normal faults formed by slip along joint zones is documented by detailed field studies in the Jurassic Aztec Sandstone in the Valley of Fire State Park, Nevada, USA. Zones of closely spaced planar sub-parallel joints arranged en échelon are sheared, forming faults. Fracturing occurs as a result of shearing, forming new joints. Later shearing along these joints leads to successively formed small faults and newer joints. This process is repeated through many generations of fracturing with increasing fault slip producing a hierarchical array of structures. Strain localization produced by shearing of joint zones at irregularities in joint traces, fracture intersections, and in the span between adjacent sheared joints results in progressive fragmentation of the weakened sandstone, which leads to the formation of gouge along the fault zone. The length and continuity of the gouge and associated slip surfaces is related to the slip magnitude and fault geometry with slip ranging from several millimeters to about 150 m. Distributed damage in a zone surrounding the gouge core is related to the original joint zone configuration (step sense, individual sheared joint overlaps and separation), shear sense, and slip magnitude. Our evolutionary model of fault development helps to explain some outstanding issues concerning complexities in faulting such as, the variability in development of fault rock and fault related fractures, and the failure processes in faults.

  2. Mechanism of formation of wiggly compaction bands in porous sandstone: 1. Observations and conceptual model

    Science.gov (United States)

    Liu, Chun; Pollard, David D.; Deng, Shang; Aydin, Atilla

    2015-12-01

    Field observations are combined with microscopic analyses to investigate the mechanism of formation of wiggly compaction bands (CBs) in the porous Jurassic aeolian Aztec Sandstone exposed at Valley of Fire State Park, Nevada. Among the three types of CBs (T1, T2, and T3), we focused on the wiggly CBs (T3), which show a chevron (T31) or wavy (T32) pattern with typical corner angles of approximately 90° or 130°, respectively. Where corner angles of wiggly CBs increase to 180°, they become straight CBs (T33). Image analyses of thin sections using an optical microscope show host rock porosity increases downslope in this dune, and the predominant type of wiggly CBs also varies from chevron to straight CBs. Specifically, band type varies continuously from chevron to wavy to straight where the porosity and grain sorting of the host rock increase systematically. Based on the crack and anticrack models, we infer that the change from chevron to straight CBs is due to increasing failure angle of the sandstone and this may correlate with increasing grain sorting. Wavy CBs with intermediate failure angle and host rock porosity are an intermediate stage between chevron and straight CBs. Previous sedimentological studies also have suggested that grain size and sorting degree increase downslope on the downwind side of sand dunes due to a sieving process of the wind-blown grains. Therefore, the transition of wiggly CB types in this regard correlates with increasing sorting and perhaps with increasing porosity downslope.

  3. Pore Structure and Limit Pressure of Gas Slippage Effect in Tight Sandstone

    Directory of Open Access Journals (Sweden)

    Lijun You

    2013-01-01

    Full Text Available Gas slip effect is an important mechanism that the gas flow is different from liquid flow in porous media. It is generally considered that the lower the permeability in porous media is, the more severe slip effect of gas flow will be. We design and then carry out experiments with the increase of backpressure at the outlet of the core samples based on the definition of gas slip effect and in view of different levels of permeability of tight sandstone reservoir. This study inspects a limit pressure of the gas slip effect in tight sandstones and analyzes the characteristic parameter of capillary pressure curves. The experimental results indicate that gas slip effect can be eliminated when the backpressure reaches a limit pressure. When the backpressure exceeds the limit pressure, the measured gas permeability is a relatively stable value whose range is less than 3% for a given core sample. It is also found that the limit pressure increases with the decreasing in permeability and has close relation with pore structure of the core samples. The results have an important influence on correlation study on gas flow in porous medium, and are beneficial to reduce the workload of laboratory experiment.

  4. The Effects of Temperature and Pressure on the Porosity Evolution of Flechtinger Sandstone

    Science.gov (United States)

    Hassanzadegan, Alireza; Blöcher, Guido; Milsch, Harald; Urpi, Luca; Zimmermann, Günter

    2014-03-01

    A porosity change influences the transport properties and the elastic moduli of rock while circulating water in a geothermal reservoir. The static and dynamic elastic moduli can be derived from the slope of stress-strain curves and velocity measurements, respectively. Consequently, the acoustic velocities were measured while performing hydrostatic drained tests. The effect of temperature on static and dynamic elastic moduli and porosity variations of Flechtinger sandstone was investigated in a wide range of confining pressure from 2 to 55 MPa. The experiments were carried out in a conventional triaxial system whereas the pore pressure remained constant, confining pressure was cycled, and temperature was increased step wise (25, 60, 90, 120, and 140 °C). The porosity variation was calculated by employing two different theories: poroelasticity and crack closure. The porosity variation and crack porosity were determined by the first derivative of stress-strain curves and the integral of the second derivative of stress-strain curves, respectively. The crack porosity analysis confirms the creation of new cracks at high temperatures. The porosity variation was increasing with an increase in temperature at low effective pressures and was decreasing with a rise in temperature at high effective pressures. Both compressional and shear wave velocities were increasing with increasing pressure due to progressive crack closure. Furthermore, the thermomechanical behavior of Flechtinger sandstone was characterized by an inversion effect where the sign of the temperature derivative of the drained bulk modulus changes.

  5. Applying sandstone petrofacies to unravel the Upper Carboniferous evolution of the Paganzo Basin, northwest Argentina

    Science.gov (United States)

    Net, Laura I.; Limarino, Carlos O.

    2006-12-01

    A compositional study of sandstones belonging to the lower section of the Paganzo Group (Middle Carboniferous-Early Permian) in the Paganzo Basin (northwestern Argentina) helps unravel the stratigraphic and paleogeographic evolution of the basin. Three morphotectonic units constitute the complex basement of the basin: (1) to the east, the igneous-metamorphic basement of the Sierras Pampeanas and Famatina systems; (2) to the west, the Precordillera, made up of Early and Middle Paleozoic sedimentary rocks; and (3) the Upper Paleozoic volcanic arc along the western boundary with the Río Blanco Basin. On the basis of sandstone detrital modes of the Lagares, Malanzán, Loma Larga, Guandacol, Tupe, Punta del Agua, and Río del Peñón formations, seven petrofacies are distinguished: quartzofeldespathic (QF), quartzofeldespathic-metamorphic enriched (QF-Lm), quartzofeldespathic-sedimentary enriched (QF-Ls), mixed quartzolithic (QL), quartzolithic-volcanic (QLv), volcanolithic-quartzose (LvQ), and volcanolithic (Lv). The spatial and temporal distribution of these petrofacies suggest an evolutive model for the Upper Paleozoic sedimentary filling of the basin that includes three "petrosomes": (1) the basement petrosome, a clastic wedge of arkosic composition that diachronically prograded and thinned from east to west; (2) the recycled orogen petrosome, revealing the Protoprecordillera as a positive element in the western Paganzo Basin during the Namurian; and (3) the volcanic arc petrosome, recording volcanic activity along the western margin of Gondwana during the Westphalian.

  6. Experimental Study on the Softening Characteristics of Sandstone and Mudstone in Relation to Moisture Content

    Directory of Open Access Journals (Sweden)

    Gui-chen Li

    2017-01-01

    Full Text Available The kinetics of fluid-solid coupling during immersion is an important topic of investigation in rock engineering. Two rock types, sandstone and mudstone, are selected in this work to study the correlation between the softening characteristics of the rocks and moisture content. This is achieved through detailed studies using scanning electron microscopy, shear tests, and evaluation of rock index properties during exposure to different moisture contents. An underground roadway excavation is simulated by dynamic finite element modeling to analyze the effect of moisture content on the stability of the roadway. The results show that moisture content has a significant effect on shear properties reduction of both sandstone and mudstone, which must thus be considered in mining or excavation processes. Specifically, it is found that the number, area, and diameter of micropores, as well as surface porosity, increase with increasing moisture content. Additionally, stress concentration is negatively correlated with moisture content, while the influenced area and vertical displacement are positively correlated with moisture content. These findings may provide useful input for the design of underground roadways.

  7. Wettability of Chalk and Argillaceous Sandstones Assessed from T1/T2 Ratio

    DEFF Research Database (Denmark)

    Katika, Konstantina; Saidian, M.; Fabricius, Ida Lykke

    Low-field NMR relaxation of the fluids inside the porous rock is the result of bulk and surface relaxation of the protons inside the pore fluid. Bulk relaxation is a fluid property when the solid-fluid interaction is minimized. Surface relaxation is the result of the solid-fluid interaction related...... with water, oil or oil/water at irreducible water saturation. The T1/T2 ratio obtained from T1-T2 maps reflects the T2-shortening. We compare the T1/T2 ratio for the same type of rock, saturated with different fluids. The chalk shows high affinity for water, Berea sandstone has no clear preference for oil...... ratio can quantify the affinity between the rock and wetting pore fluid. The affinity is a measure directly linked to wettability. In order to investigate the T2-shortening, we performed T1-T2 NMR experiments on different samples of chalk, Berea sandstone, and chloritic greensand, saturated either...

  8. Lateral Facies and Permeability Changes in Upper Shoreface Sandstones, Berakas Syncline, Brunei Darussalam

    Directory of Open Access Journals (Sweden)

    Ovinda Ovinda

    2016-12-01

    Full Text Available DOI: 10.17014/ijog.4.1.11-20Several outcrops were studied to identify sedimentary facies and to analyze permeability distribution, through which an outcrop analogue for upper shoreface reservoirs can be established. Four facies were identified: upper shoreface, lower shoreface, offshore transition, and tidal ones. Stratigraphic correlation of eleven outcrops indicates that the upper shoreface sandstone is generally clean, well sorted, parallel, and planar cross laminated. The sand becomes thinner and pinches out to the northwest where the mud proportion increases within the sand. Muddier sand was deposited in a relatively low energy upper shoreface setting. The thickness of the upper shoreface reservoir sand generally is 5 m. It decreases to zero over approximately 1.3 km as the sand pinches out to the northwest. To the northeast, the thickness also decreases to 4 m over approximately 4 km. Permeability values are more variable laterally than vertically. The permeability distribution has an obvious relationship to the sedimentary facies and is mainly controlled by the proportion of mud and bioturbation. As the sand pinches out in the northwest, permeability decreases from 590 md to 97 md over 1 km. To the northeast, permeability also decreases to 152 md over approximately 4 km where the sand becomes highly bioturbated. These values indicate that the sands are of good to very good reservoir quality. It appears that there are no major barriers to the lateral flow of fluid within the upper shoreface sandstone.

  9. NMR Pore Structure and Dynamic Characteristics of Sandstone Caused by Ambient Freeze-Thaw Action

    Directory of Open Access Journals (Sweden)

    Bo Ke

    2017-01-01

    Full Text Available For a deeper understanding of the freeze-thaw weathering effects on the microstructure evolution and deterioration of dynamic mechanical properties of rock, the present paper conducted the nuclear magnetic resonance (NMR tests and impact loading experiments on sandstone under different freeze-thaw cycles. The results of NMR test show that, with the increase of freeze-thaw cycles, the pores expand and pores size tends to be uniform. The experimental results show that the stress-strain curves all go through four stages, namely, densification, elasticity, yielding, and failure. The densification curve is shorter, and the slope of elasticity curve decreases as the freeze-thaw cycles increase. With increasing freeze-thaw cycles, the dynamic peak stress decreases and energy absorption of sandstone increases. The dynamic failure form is an axial splitting failure, and the fragments increase and the size diminishes with increasing freeze-thaw cycles. The higher the porosity is, the more severe the degradation of dynamic characteristics is. An increase model for the relationships between the porosity or energy absorption and freeze-thaw cycles number was built to reveal the increasing trend with the freeze-thaw cycles increase; meanwhile, a decay model was built to predict the dynamic compressive strength degradation of rock after repeated freeze-thaw cycles.

  10. Hyporheic zone influences on concentration-discharge relationships in a headwater sandstone stream

    Science.gov (United States)

    Hoagland, Beth; Russo, Tess A.; Gu, Xin; Hill, Lillian; Kaye, Jason; Forsythe, Brandon; Brantley, Susan L.

    2017-06-01

    Complex subsurface flow dynamics impact the storage, routing, and transport of water and solutes to streams in headwater catchments. Many of these hydrogeologic processes are indirectly reflected in observations of stream chemistry responses to rain events, also known as concentration-discharge (CQ) relations. Identifying the relative importance of subsurface flows to stream CQ relationships is often challenging in headwater environments due to spatial and temporal variability. Therefore, this study combines a diverse set of methods, including tracer injection tests, cation exchange experiments, geochemical analyses, and numerical modeling, to map groundwater-surface water interactions along a first-order, sandstone stream (Garner Run) in the Appalachian Mountains of central Pennsylvania. The primary flow paths to the stream include preferential flow through the unsaturated zone ("interflow"), flow discharging from a spring, and groundwater discharge. Garner Run stream inherits geochemical signatures from geochemical reactions occurring along each of these flow paths. In addition to end-member mixing effects on CQ, we find that the exchange of solutes, nutrients, and water between the hyporheic zone and the main stream channel is a relevant control on the chemistry of Garner Run. CQ relationships for Garner Run were compared to prior results from a nearby headwater catchment overlying shale bedrock (Shale Hills). At the sandstone site, solutes associated with organo-mineral associations in the hyporheic zone influence CQ, while CQ trends in the shale catchment are affected by preferential flow through hillslope swales. The difference in CQ trends document how the lithology and catchment hydrology control CQ relationships.

  11. Impact of Sauropod Dinosaurs on Lagoonal Substrates in the Broome Sandstone (Lower Cretaceous), Western Australia

    Science.gov (United States)

    Thulborn, Tony

    2012-01-01

    Existing knowledge of the tracks left by sauropod dinosaurs (loosely ‘brontosaurs’) is essentially two-dimensional, derived mainly from footprints exposed on bedding planes, but examples in the Broome Sandstone (Early Cretaceous) of Western Australia provide a complementary three-dimensional picture showing the extent to which walking sauropods could deform the ground beneath their feet. The patterns of deformation created by sauropods traversing thinly-stratified lagoonal deposits of the Broome Sandstone are unprecedented in their extent and structural complexity. The stacks of transmitted reliefs (underprints or ghost prints) beneath individual footfalls are nested into a hierarchy of deeper and more inclusive basins and troughs which eventually attain the size of minor tectonic features. Ultimately the sauropod track-makers deformed the substrate to such an extent that they remodelled the topography of the landscape they inhabited. Such patterns of substrate deformation are revealed by investigating fragmentary and eroded footprints, not by the conventional search for pristine footprints on intact bedding planes. For that reason it is not known whether similar patterns of substrate deformation might occur at sauropod track-sites elsewhere in the world. PMID:22662116

  12. The Influence of Temperature on Mode I Fracture Toughness and Fracture Characteristics of Sandstone

    Science.gov (United States)

    Feng, Gan; Kang, Yong; Meng, Tao; Hu, Yao-qing; Li, Xiao-hong

    2017-08-01

    This study investigated the influence of temperature on the mode I fracture toughness of sandstone using semicircular bend specimens. Fracture characteristics were studied using scanning electron microscopy and other means. The results showed that temperature influenced fracturing in three stages along a temperature gradient. In the low-temperature stage (20-100 °C), fracture toughness increases slowly, with a total increase of approximately 11%. At the medium-temperature stage (100-500 °C), fracture toughness decreases slowly, at a rate of approximately 18%. During the high-temperature stage (500-800 °C), fracture toughness was reduced by approximately 44%. The mode I fracture toughness has a clear temperature threshold (500-600 °C). Below this threshold, the fracture toughness decreases slowly. When the temperature threshold is reached, the fracture toughness decreases sharply. The sharp decrease is mainly caused by the creation of a fragmentation structure. The sandstone experiences more transgranular fracture mechanics in the low-temperature stage compared to the high-temperature stage. Above 100 °C, the mechanisms include transgranular fracturing, intergranular fracturing, thermal cracking, and mutual coupling fracturing. When the temperature exceeds 500 °C, several different fragmentation structures are seen. This research study provides significant data to evaluate fracture characteristics and rock safety and stability after heat treatment.

  13. Probing the pore space of geothermal reservoir sandstones by nuclear magnetic resonance

    Energy Technology Data Exchange (ETDEWEB)

    Frosch, George P.; Althaus, Egon [Karlsruhe Univ., Mineralogisches Inst., Karlsruhe (Germany); Tillich, Joachim E.; Haselmeier, Ralf; Holz, Manfred [Karlsruhe Univ., Inst. fuer Physikalische Chemie, Karlsruhe (Germany)

    2000-12-01

    Pulsed-Field-Gradient-Nuclear Magnetic Resonance (PFG-NMR) is an interesting method to determine microscopic but volumetrically averaged properties of pore space. In the present paper a number of sandstone samples, taken from drill cores of geothermal wells in North Germany, have been investigated. The time-dependent self-diffusion of water molecules in their confined geometry is used to probe the pore space. The short-time behaviour of the self-diffusion coefficient (anomalous diffusion) in the porous matrix allows the determination of the surface-to-pore volume ratio S/V{sub p}. At long diffusion times, molecules scout the tortuosity of the interconnected pore space of the sandstones. The NMR results were compared with data from petrographic image analysis (PIA), adsorption experiments and electric conductivity measurements. The PGF-NMR measurements give surface-to-pore volume ratios S/V{sub p} that are comparable to those estimated with the petrographic image analysis. The tortuosities match in most cases data from conductivity measurements, so the PFG-NMR is regarded as an appropriate tool to determine this quantity. The results are not influenced by the adherence of 'scout-molecules' to the pore walls. The surface-to-pore volume ratios and tortuosities were used to calculate permeabilities of the systems of interest, which were in good agreement with measured core-plug permeabilities. Results of additional NMR relaxation experiments are used to obtain adsorption isotherms for cations at active surface sites. (Author)

  14. Provenance study from petrography of the late Permian - Early Triassic sandstones of the Balfour Formation Karoo Supergroup, South Africa

    Science.gov (United States)

    Oghenekome, M. E.; Chatterjee, T. K.; Hammond, N. Q.; van Bever Donker, J. M.

    2016-02-01

    Non marine clastic sediments from the Late Permian - Early Triassic Balfour Formation of the Karoo Supergroup were studied to infer the composition, provenance and influence of weathering conditions. Petrographic studies based on quantitative analysis of the detrital minerals reveal that these sediments (mainly sandstones) are mostly composed of quartz, feldspar and sedimentary and metamorphic rock fragments. There is no significant petrographic variation across the sandstone succession of the study. The sandstones are dominantly feldspathic litharenite and ultralithofeldspathic in composition indicating a metamorphic source area. Modal analysis data plot in the dissected and transitional arc block provenance fields of QmFLt (quartz-feldspar-lithic fragments) diagram suggesting an active margin and magmatic arc signature preserving a recycled provenance.

  15. Predictive modeling of CO2 sequestration in deep saline sandstone reservoirs: Impacts of geochemical kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Balashov, Victor N.; Guthrie, George D.; Hakala, J. Alexandra; Lopano, Christina L.; Rimstidt, J. Donald; Brantley, Susan L.

    2013-03-01

    One idea for mitigating the increase in fossil-fuel generated CO{sub 2} in the atmosphere is to inject CO{sub 2} into subsurface saline sandstone reservoirs. To decide whether to try such sequestration at a globally significant scale will require the ability to predict the fate of injected CO{sub 2}. Thus, models are needed to predict the rates and extents of subsurface rock-water-gas interactions. Several reactive transport models for CO{sub 2} sequestration created in the last decade predicted sequestration in sandstone reservoirs of ~17 to ~90 kg CO{sub 2} m{sup -3|. To build confidence in such models, a baseline problem including rock + water chemistry is proposed as the basis for future modeling so that both the models and the parameterizations can be compared systematically. In addition, a reactive diffusion model is used to investigate the fate of injected supercritical CO{sub 2} fluid in the proposed baseline reservoir + brine system. In the baseline problem, injected CO{sub 2} is redistributed from the supercritical (SC) free phase by dissolution into pore brine and by formation of carbonates in the sandstone. The numerical transport model incorporates a full kinetic description of mineral-water reactions under the assumption that transport is by diffusion only. Sensitivity tests were also run to understand which mineral kinetics reactions are important for CO{sub 2} trapping. The diffusion transport model shows that for the first ~20 years after CO{sub 2} diffusion initiates, CO{sub 2} is mostly consumed by dissolution into the brine to form CO{sub 2,aq} (solubility trapping). From 20-200 years, both solubility and mineral trapping are important as calcite precipitation is driven by dissolution of oligoclase. From 200 to 1000 years, mineral trapping is the most important sequestration mechanism, as smectite dissolves and calcite precipitates. Beyond 2000 years, most trapping is due to formation of aqueous HCO{sub 3}{sup -}. Ninety-seven percent of the

  16. Electrofacies vs. lithofacies sandstone reservoir characterization Campanian sequence, Arshad gas/oil field, Central Sirt Basin, Libya

    Science.gov (United States)

    Burki, Milad; Darwish, Mohamed

    2017-06-01

    The present study focuses on the vertically stacked sandstones of the Arshad Sandstone in Arshad gas/oil field, Central Sirt Basin, Libya, and is based on the conventional cores analysis and wireline log interpretation. Six lithofacies types (F1 to F6) were identified based on the lithology, sedimentary structures and biogenic features, and are supported by wireline log calibration. From which four types (F1-F4) represent the main Campanian sandstone reservoirs in the Arshad gas/oil field. Lithofacies F5 is the basal conglomerates at the lower part of the Arshad sandstones. The Paleozoic Gargaf Formation is represented by lithofacies F6 which is the source provenance for the above lithofacies types. Arshad sediments are interpreted to be deposited in shallow marginal and nearshore marine environment influenced by waves and storms representing interactive shelf to fluvio-marine conditions. The main seal rocks are the Campanian Sirte shale deposited in a major flooding events during sea level rise. It is contended that the syn-depositional tectonics controlled the distribution of the reservoir facies in time and space. In addition, the post-depositional changes controlled the reservoir quality and performance. Petrophysical interpretation from the porosity log values were confirmed by the conventional core measurements of the different sandstone lithofacies types. Porosity ranges from 5 to 20% and permeability is between 0 and 20 mD. Petrophysical cut-off summary of the lower part of the clastic dominated sequence (i. e. Arshad Sandstone) calculated from six wells includes net pay sand ranging from 19.5‧ to 202.05‧, average porosity from 7.7 to 15% and water saturation from 19 to 58%.

  17. Hydrogeology of the Hawkesbury Sandstone in the Southern Highlands of NSW in relation to Mesozoic Horst-Graben tectonics and stratigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. [Hydroilex, Miranda, NSW (Australia)

    2000-07-01

    Systematic borehole geophysical logging, stratigraphic analysis and geological mapping in the Southern Highlands district has revealed a number of significant structural, stratigraphic and hydrogeological findings. These are: identification of a regional uplifted belt coincident with the Mittagong Ranges; stratigraphic differentiation of the Hawksbury Sandstone into three lithofacies; and the identification of the main ground water controls within the Hawkbury sandstone. 24 refs., 10 figs.

  18. Origin and mobility of alkalies in two Dutch ASR-concretes. II: Microscale element distribution around sandstone and chert. Implications for the mechanism of ASR

    NARCIS (Netherlands)

    Broekmans, M.A.T.M.; Nijland, T.G.; Jansen, J.B.H.

    2001-01-01

    River gravel used as aggregate for concrete in the Netherlands contains several potentially deleterious components with respect to alkali-silica reaction (ASR), viz. porous chert, chalcedony, and impure sandstones (greywackes. mica- and sericite-rich sandstones, siltstones, arkoses etc.). Whereas

  19. EFFECT OF SANDSTONE ANISOTROPY ON ITS HEAT AND MOISTURE TRANSPORT PROPERTIES

    Directory of Open Access Journals (Sweden)

    Jan Fořt

    2015-09-01

    Full Text Available Each type of natural stone has its own geological history, formation conditions, different chemical and mineralogical composition, which influence its possible anisotropy. Knowledge in the natural stones anisotropy represents crucial information for the process of stone quarrying, its correct usage and arrangement in building applications. Because of anisotropy, many natural stones exhibit different heat and moisture transport properties in various directions. The main goal of this study is to analyse several anisotropy indices and their effect on heat transport and capillary absorption. For the experimental determination of the anisotropy effect, five types of sandstone coming from different operating quarries in the Czech Republic are chosen. These materials are often used for restoration of culture heritage monuments as well as for other building applications where they are used as facing slabs, facade panels, decoration stones, paving, etc. For basic characterization of studied materials, determination of their bulk density, matrix density and total open porosity is done. Chemical composition of particular sandstones is analysed by X-Ray Fluorescence. Anisotropy is examined by the non-destructive measurement of velocity of ultrasonic wave propagation. On the basis of ultrasound testing data, the relative anisotropy, total anisotropy and anisotropy coefficient are calculated. Then, the measurement of thermal conductivity and thermal diffusivity in various directions of samples orientation is carried out. The obtained results reveal significant differences between the parameters characterizing the heat transport in various directions, whereas these values are in accordance with the indices of anisotropy. Capillary water transport is described by water absorption coefficient measured using a sorption experiment, which is performed for distilled water and 1M NaCl water solution.  The measured data confirm the effect of anisotropy which is

  20. Ordovician conodonts and stratigraphy of the ST. Peter sandstone and glen wood shale, central United States

    Science.gov (United States)

    Witzke, B.J.; Metzger, R.A.

    2005-01-01

    The age of the St. Peter Sandstone in the central and northern Midcontinent has long been considered equivocal because of the general absence of biostratigraphically useful fossils. Conodonts recovered from the St. Peter Sandstone in Iowa, Minnesota, Nebraska, and Kansas for this study help place some age constraints on this renowned formation in its northern and western extent. Faunas from the lower St. Peter include Phragmodus flexuosus, Cahabagnathus sp., and Leptochirognathus sp., and a late Whiterockian (Chazyan) correlation is indicated. Juvenile or immature elements of P. flexuosus from these collections show morphologies trending toward P. cognitus and P. inflexus, and paedomorphic derivation of these latter species is proposed. Diverse assemblages of hyaline forms also occur in the St. Peter strata (Erismodus spp., Erraticodon sp., Curtognathus sp., Coleodus sp., Archeognathus sp., Stereoconus sp., others) along with various albid elements (Plectodina sp., Eoplacognathus sp., others). The overlying Glenwood Shale contains abundant conodonts dominated by Phragmodus cognitus, Erismodus sp., and Chirognathus duodactylus, and the fauna is interpreted as an early Mohawkian (Blackriveran) association. Certain thin shale units in the St. Peter-Glenwood succession represent condensed intervals, in part reflected by their exceptionally high conodont abundances. Some organic-rich phosphatic shale units in the lower St. Peter of western Iowa have produced equivalent yields of tens of thousands of conodonts per kilogram, and many Glenwood Shale samples yield thousands of conodonts per kilogram. Previous depositional models have proposed that the St. Peter is primarily a succession of littoral and nearshore facies forming a broadly diachronous transgressive sheet sand. However, broad-scale diachroneity cannot be demonstrated with available biostratigraphic control. The recognition of condensed marine shale units, phosphorites, ironstones, and pyritic hardgrounds in the

  1. Selective sandstone deterioration in the cathedrals of Salamanca, Textural anisotropy as a cause

    Directory of Open Access Journals (Sweden)

    Martín Patino, María Teresa

    1994-09-01

    Full Text Available Textural sandstone anisotropy is related to the selective deterioration of such stone in buildings. The samples studied come from the Cathedrals of Salamanca. Stone fragments, cut in different directions with regard to the base supporting the ashlars in the wall, are studied by means of a binocular magnifying glass and the Scanning Electron Microscopy (SEM. This shows that the sandstone microfabric has a granular and a laminar microtexture, which correspond to different directions in the plane in question as regards the position of the ashlar. Either of these circumstances coincides with the stone surface on the outside of the building and affect its surface deterioration in a different way. The SEM images of deteriorated stone were compared with those of unaffected stone, with both types coming from differently orientated cuts as regards the position of the ashlar. In conclusion, the position given to the block of stone in the building is of importance for the preservation of the stone. The speed of ultrasound transmission measured in samples from commercial quarries confirms the textural sandstone anisotropy to a greater or lesser extent.

    La anisotropía textural de las areniscas se relaciona con la selectividad de su deterioro en los edificios. Las muestras estudiadas pertenecen a las Catedrales de Salamanca. Fragmentos de piedra, cortados en direcciones diferentes respecto a la base sobre la que se asientan los sillares en el muro, son estudiados por medio de la lupa binocular y del microscopio electrónico de barrido (SEM. De éstos se deduce que la microfábrica de las areniscas tiene una microtextura granular y otra laminar, que corresponden a direcciones diferentes del plano respecto al asiento del sillar. Una u otra de estas situaciones coincide con la superficie de la piedra expuesta al exterior en el edificio, y afectan a su deterioro superficial de forma diferente. Las capas externas en las que predomina la arcilla

  2. The experimental modeling of gas percolation mechanisms in a coal-measure tight sandstone reservoir: A case study on the coal-measure tight sandstone gas in the Upper Triassic Xujiahe Formation, Sichuan Basin, China

    Directory of Open Access Journals (Sweden)

    Shizhen Tao

    2016-12-01

    Full Text Available Tight sandstone gas from coal-measure source rock is widespread in China, and it is represented by the Xujiahe Formation of the Sichuan Basin and the Upper Paleozoic of the Ordos Basin. It is affected by planar evaporative hydrocarbon expulsion of coal-measure source rock and the gentle structural background; hydrodynamics and buoyancy play a limited role in the gas migration-accumulation in tight sandstone. Under the conditions of low permeability and speed, non-Darcy flow is quite apparent, it gives rise to gas-water mixed gas zone. In the gas displacing water experiment, the shape of percolation flow curve is mainly influenced by core permeability. The lower the permeability, the higher the starting pressure gradient as well as the more evident the non-Darcy phenomenon will be. In the gas displacing water experiment of tight sandstone, the maximum gas saturation of the core is generally less than 50% (ranging from 30% to 40% and averaging at 38%; it is similar to the actual gas saturation of the gas zone in the subsurface core. The gas saturation and permeability of the core have a logarithm correlation with a correlation coefficient of 0.8915. In the single-phase flow of tight sandstone gas, low-velocity non-Darcy percolation is apparent; the initial flow velocity (Vd exists due to the slippage effect of gas flow. The shape of percolation flow curve of a single-phase gas is primarily controlled by core permeability and confining pressure; the lower the permeability or the higher the confining pressure, the higher the starting pressure (0.02–0.08 MPa/cm, whereas, the higher the quasi-initial flow speed, the longer the nonlinear section and the more obvious the non-Darcy flow will be. The tight sandstone gas seepage mechanism study shows that the lower the reservoir permeability, the higher the starting pressure and the slower the flow velocity will be, this results in the low efficiency of natural gas migration and accumulation as well as

  3. Dynamic fluid connectivity during steady-state multiphase flow in a sandstone.

    Science.gov (United States)

    Reynolds, Catriona A; Menke, Hannah; Andrew, Matthew; Blunt, Martin J; Krevor, Samuel

    2017-08-01

    The current conceptual picture of steady-state multiphase Darcy flow in porous media is that the fluid phases organize into separate flow pathways with stable interfaces. Here we demonstrate a previously unobserved type of steady-state flow behavior, which we term "dynamic connectivity," using fast pore-scale X-ray imaging. We image the flow of N 2 and brine through a permeable sandstone at subsurface reservoir conditions, and low capillary numbers, and at constant fluid saturation. At any instant, the network of pores filled with the nonwetting phase is not necessarily connected. Flow occurs along pathways that periodically reconnect, like cars controlled by traffic lights. This behavior is consistent with an energy balance, where some of the energy of the injected fluids is sporadically converted to create new interfaces.

  4. Temperature Effects on Stiffness Moduli of Reservoir Sandstone from the Deep North Sea

    DEFF Research Database (Denmark)

    Orlander, Tobias; Andreassen, Katrine Alling; Fabricius, Ida Lykke

    We investigate effect of testing temperature on the dynamic frame stiffness of quartz-bearing North Sea sandstone from depths of 5 km. We show that at low stress levels, the rock frame stiffens with increasing temperature and we propose an explanation for the controlling mechanisms. While...... equilibrating to atmospheric conditions, cooling and stress release of reservoir material can induce tensional forces in the rock frame leading to ruptures of the contact cement in the weakest grain contacts. The frame stiffness hence reduces, as the ruptures are permanent. However, a fraction of the in......-situ stiffness can be restored by reestablishment of reservoir stress or temperature, but only as recovery of contact between ruptures and not as re-cementation. In literature, ruptures of contact cement are denoted as micro-cracks, strictly posing a bulk term, without distinguishing effects of stress from...

  5. Use of nanoparticles to improve the performance of sodium dodecyl sulfate flooding in a sandstone reservoir

    Science.gov (United States)

    Ahmadi, Mohammad Ali

    2016-12-01

    One of the prominent enhanced oil recovery (EOR) methods in oil reservoirs is surfactant flooding. The purpose of this research is to study the effect of nanoparticles on the surfactant adsorption. Real reservoir sandstone rock samples were implemented in adsorption tests. The ranges of the initial surfactant and nano silica concentrations were from 500 to 5000 ppm and 500 ppm to 2000 ppm, respectively. The commercial surfactant used is sodium dodecyl sulfate (SDS) as an ionic surfactant and two different types of nano silica were employed. The rate of surfactant losses extremely depends on the concentration of surfactant in the system, and it was found that the adsorption of surfactant decreased with increasing the concentration of nano silica. Also, it was found that hydrophobic nano silica is more effective than hydrophilic nanoparticles.

  6. Dynamic fluid connectivity during steady-state multiphase flow in a sandstone

    Science.gov (United States)

    Reynolds, Catriona A.; Menke, Hannah; Andrew, Matthew; Blunt, Martin J.; Krevor, Samuel

    2017-08-01

    The current conceptual picture of steady-state multiphase Darcy flow in porous media is that the fluid phases organize into separate flow pathways with stable interfaces. Here we demonstrate a previously unobserved type of steady-state flow behavior, which we term “dynamic connectivity,” using fast pore-scale X-ray imaging. We image the flow of N2 and brine through a permeable sandstone at subsurface reservoir conditions, and low capillary numbers, and at constant fluid saturation. At any instant, the network of pores filled with the nonwetting phase is not necessarily connected. Flow occurs along pathways that periodically reconnect, like cars controlled by traffic lights. This behavior is consistent with an energy balance, where some of the energy of the injected fluids is sporadically converted to create new interfaces.

  7. Extreme Learning Machine for Reservoir Parameter Estimation in Heterogeneous Sandstone Reservoir

    Directory of Open Access Journals (Sweden)

    Jianhua Cao

    2015-01-01

    Full Text Available This study focuses on reservoir parameter estimation using extreme learning machine in heterogeneous sandstone reservoir. The specific aim of work is to obtain accurate porosity and permeability which has proven to be difficult by conventional petrophysical methods in wells without core data. 4950 samples from 8 wells with core data have been used to train and validate the neural network, and robust ELM algorithm provides fast and accurate prediction results, which is also testified by comparison with BP (back propagation network and SVM (support vector machine approaches. The network model is then applied to estimate porosity and permeability for the remaining wells. The predicted attributes match well with the oil test conclusions. Based on the estimations, reservoir porosity and permeability have been mapped and analyzed. Two favorable zones have been suggested for further research in the survey.

  8. Structural analysis of the fracture surface of a heterogeneous body (quartz sandstone)

    Science.gov (United States)

    Vettegren', V. I.; Mamalimov, R. I.; Kulik, V. B.; Patonin, A. V.; Ponomarev, A. V.; Sobolev, G. A.; Shcherbakov, I. P.

    2017-07-01

    The structure of surface layers of quartz sandstone with a thickness of 1 μm before and after destruction by a compressive stress is studied by methods of infrared, photoluminescent, and Raman spectroscopy. Before destruction, this layer contained quartz grains cemented with montmorrillonite and kaolinite. The grains are covered with a thin water layer and have crystallographic defects: Si-O-, self-trapped excitons, AlOH and LiOH compounds, [AlO4]- centers, etc. The destructed surface contains separate quartz grains with sizes of 2 μm and a reduced defect concentration. It is assumed that the defects reduce the strength of quartz grains, which are destroyed in the first turn.

  9. Mineralogy and Genesis of the Windjana Sandstone, Kimberley Area, Gale Crater, Mars

    Science.gov (United States)

    Treiman, A. H.; Bish, D.; Ming, D. W.; Grotzinger, J.; Vaniman, D. T.; Baker, M. B.; Farmer, J.; Chipera, S.; Downs, R. T.; Morris, R. V.; hide

    2015-01-01

    MSL Curiosity investigated the Windjana sandstone outcrop, in the Kimberley area of Gale Crater, and obtained mineralogical analyses with the CheMin XRD instrument. Windjana is remarkable in containing an abundance of potassium feldspar (and thus K in its bulk chemistry) combined with a low abundance of plagioclase (and low Na/K in its chemistry). The source of this enrichment in K is not clear, but has significant implications for the geology of Gale Crater and of Mars. The high K could be intrinsic to the sediment and imply that the sediment source area (Gale Crater rim) includes K-rich basalts and possibly more evolved rocks derived from alkaline magmas. Alternatively, the high K could be diagenetic and imply that the Gale Crater sediments were altered by K-rich aqueous fluids after deposition.

  10. Determining Upper Bounds for the Clay-squirt Effect in Clay Bearing Sandstone

    DEFF Research Database (Denmark)

    Sørensen, Morten Kanne; Fabricius, Ida Lykke

    2012-01-01

    Sonic measurements of saturated bulk moduli of clay bearing sandstones show larger values than expected by Gassmann modelling from dry rock properties. This causes difficulties in extrapolation of laboratory data to different saturants or frequencies. Squirt flow from the clay phase of the rock...... have been proposed as the mechanism behind this stiffening. Low fluid mobility and low bulk modulus of the clay phase cause excess pore-pressures to be induced and retained in the phase leading to stiffening. A quantitative bound is formulated for this effect through the determination of the Hashin......-Shtrikman bounds for the case of a drained clay phase and an undrained clay phase. The bound is achieved by analyzing the influence of the relevant parameters with subsequent grouping using reasonable correlations. Through this approach only the saturated bulk modulus of the quartz phase and the clay fraction...

  11. Porosity evolution of artificially weathered sandstones: how reliable are porosimetric measurements for durability prediction?

    Science.gov (United States)

    Prikryl, Richard; Weishauptová, Zuzana

    2017-04-01

    Several types of sandstones were subjected to artificial weathering (cycles of freezing/thawing, salt crystallization). After termination of certain number of cycles (the highest one was 144 cycles), part of specimens were removed and tested for various physical properties. In the recent study, we have focused on the analysis of pore space textural characteristics by means of mercury porosimetry. From the raw data, several durability indices previously proposed in literature were computed. Despite macroscopically visible damage produced by artificial weathering, most of the examined materials were classified as resistant against respective weathering processes by those indices. Additional observation of rock microfabric conducted by SEM-EDS revealed features which must be taken into account during evaluation of durability of porous materials. Therefore, porosimetric data alone cannot be used as a single durability estimate.

  12. Architecture of an Upper Jurassic barrier island sandstone reservoir, Danish Central Graben:

    DEFF Research Database (Denmark)

    Johannessen, Peter N.; Nielsen, Lars H.; Nielsen, Lars

    2010-01-01

    . As a complementary approach to investigation of the reservoir architecture, a Holocene–Recent barrier island system in the Danish part of the NW European Wadden Sea has been studied and used as an analogue. The barrier island of Rømø developed during a relative sea-level rise of c. 15 m during the last c. 8000 years...... and seismic resolution is inadequate for architectural analysis. Description of the reservoir sandstone bodies is thus based on sedimentological interpretation and correlation of seven wells, of which five were cored. Palaeotopography played a major role in the position and preservation of the thick reservoir...... and is up to 20 m thick. To unravel the internal 3D facies architecture of the island, an extensive ground penetrating radar (GPR) survey of 35 km line length and seven cores, c. 25 m long, was obtained. Although the barrier island experienced a rapid relative sea-level rise, sedimentation kept pace...

  13. Influence of the properties of granite and sandstone in the desalination process by electrokinetic technique

    DEFF Research Database (Denmark)

    Feijoo, J.; Ottosen, Lisbeth M.; Pozo-Antonio, J.S.

    2015-01-01

    such as sand disaggregation and superficial detachments. These problems can be solved by conservation technologies, which are aimed to decrease the salt concentration in rocks (desalination).The present study aimed to investigate the efficiency of electrokinetic techniques for desalination of two different......Soluble salts are considered a main cause of damage of porous building materials such as rocks, bricks or granites, which were commonly used in the building constructions of the architectural and archaeological heritage. Soluble salts are also responsible for various forms of deterioration...... kinds of rocks: granite and sandstone. These rocks were contaminated with NaCl solution, and samples with a thickness of 6. cm were used in the tests. This study compared the percentage of salt removal at different depths (efficacy) and the time needed to get the same percentage removal (effectiveness...

  14. The effects of Concentration and Salinity on Polymer Adsorption Isotherm at Sandstone Rock Surface

    Science.gov (United States)

    Ali, M.; Ben Mahmud, H.

    2015-04-01

    Adsorption of hydrolyzed polyacrylamide (HPAM) polymers on sandstone rock surface was studied by static adsorption experiments. Total of 10 Runs of static experiments were conducted in test tubes by mixing the desired solution with crushed rock sample, at temperature of 25 °C, and salinity range from 0-4 wt%. The results are in conformity with Langmuir's isotherm. Ten different isotherms were generated at each Run. The initial polymer concentration was varied from 0.3-2.1 g/l. The effects of salinity have been studied by observation on Langmuir adsorption coefficients (Y and K). The results show that the adsorption coefficient (Y) was found to have linear relationship with salinity. The adsorption coefficient (K) was found to be related to salinity by a quadratic relationship.

  15. Numerical study of AE and DRA methods in sandstone and granite in orthogonal loading directions

    Directory of Open Access Journals (Sweden)

    Xu-hua Ren

    2012-03-01

    Full Text Available The directional dependency of the acoustic emission (AE and deformation rate analysis (DRA methods was analyzed, based on the contact bond model in the two-dimensional particle flow code (PFC2D in two types of rocks, the coarse-grained sandstone and Aue granite. Each type of rocks had two shapes, the Brazilian disk and a square shape. The mechanical behaviors of the numerical model had already been verified to be in agreement with those of the physical specimens in previous research. Three loading protocols with different loading cycles in two orthogonal directions were specially designed in the numerical tests. The results show that no memory effect is observed in the second loading in the orthogonal direction. However, both the cumulative crack number of the second loading and the differential strain value at the inflection point are influenced by the first loading in the orthogonal direction.

  16. Permeability in Rotliegend gas sandstones to gas and brine as predicted from NMR, mercury injection and image analysis

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Fabricius, Ida Lykke; Fisher, Quentin

    2015-01-01

    Permeability characterisation of low permeability, clay-rich gas sandstones is part of production forecasting and reservoir management. The physically based Kozeny (1927) equation linking permeability with porosity and pore size is derived for a porous medium with a homogeneous pore size, whereas...

  17. Test research on influence of admixture agent on engineering characteristics of red sandstone roadbed filling in Dongchang Expressway

    Science.gov (United States)

    Liang, Bo; Dong, Tianxiong; Mei, Yingjun; Pan, Jinqiu

    2017-04-01

    By taking the red sandstone along the Jiangxi Dongchang expressway as the research object, this article takes lime and cement as the admixture agent, and conducts a series of laboratory test investigations on plain soil and improved soil, to research on the influence of the addition proportion on the physical and mechanical properties of red sandstone. According to test results: compared with plain soil, the red sandstones with admixture agents of lime and cement have reduced liquid limit and plastic limit, with reduced plastic index. With the increase of the proportion of lime, the optimal moisture content of the lime-improved soil gradually increases, and the maximum dry density gradually decreases. With the increase of the proportion of cement, the maximum dry density of the cement-improved soil increases, and the optimal moisture content decreases. The CBR improvement effect of cement-improved soil is better than that of the lime-improved soil. The optimal addition proportion of CBR of both the lime-improved soil and the cement-improved soil is 7%. Compared with plain red sandstone, the improvement on compaction functions plays a more significant role on the improvement of the CBR of the improved soil.

  18. Experimental study and theoretical interpretation of saturation effect on ultrasonic velocity in tight sandstones under different pressure conditions

    Science.gov (United States)

    Li, Dongqing; Wei, Jianxin; Di, Bangrang; Ding, Pinbo; Huang, Shiqi; Shuai, Da

    2018-03-01

    Understanding the influence of lithology, porosity, permeability, pore structure, fluid content and fluid distribution on the elastic wave properties of porous rocks is of great significance for seismic exploration. However, unlike conventional sandstones, the petrophysical characteristics of tight sandstones are more complex and less understood. To address this problem, we measured ultrasonic velocity in partially saturated tight sandstones under different effective pressures. A new model is proposed, combining the Mavko-Jizba-Gurevich relations and the White model. The proposed model can satisfactorily simulate and explain the saturation dependence and pressure dependence of velocity in tight sandstones. Under low effective pressure, the relationship of P-wave velocity to saturation is pre-dominantly attributed to local (pore scale) fluid flow and inhomogeneous pore-fluid distribution (large scale). At higher effective pressure, local fluid flow gradually decreases, and P-wave velocity gradually shifts from uniform saturation towards patchy saturation. We also find that shear modulus is more sensitive to saturation at low effective pressures. The new model includes wetting ratio, an adjustable parameter that is closely related to the relationship between shear modulus and saturation.

  19. Frio sandstone reservoirs in the deep subsurface along the Texas Gulf Coast: their potential for production of geopressured geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Bebout, D.G.; Loucks, R.G.; Gregory, A.R.

    1983-01-01

    Detailed geological, geophysical, and engineering studies conducted on the Frio Formation have delineated a geothermal test well site in the Austin Bayou Prospect which extends over an area of 60 square miles. A total of 800 to 900 feet of sandstone will occur between the depths of 13,500 and 16,500 feet. At leat 30 percent of the sand will have core permeabilities of 20 to 60 millidarcys. Temperature at the top of the sandstone section will be 300/sup 0/F. Water, produced at a rate of 20,000 to 40,000 barrels per day, will probably have to be disposed of by injection into shallower sandstone reservoirs. More than 10 billion barrels of water are in place in these sandstone reservoirs of the Austin Bayou Prospect; there should be approximately 400 billion cubic feet of methane in solution in this water. Only 10 percent of the water and methane (1 billion barrels of water and 40 billion cubic feet of methane) will be produced without reinjection of the waste water into the producing formation. Reservoir simulation studies indicate that 90 percent of the methane can be produced with reinjection. 106 figures.

  20. Geology and recognition criteria for sandstone uranium deposits in mixed fluvial-shallow marine sedimentary sequences, South Texas. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Adams, S.S.; Smith, R.B.

    1981-01-01

    Uranium deposits in the South Texas Uranium Region are classical roll-type deposits that formed at the margin of tongues of altered sandstone by the encroachment of oxidizing, uraniferous solutions into reduced aquifers containing pyrite and, in a few cases, carbonaceous plant material. Many of the uranium deposits in South Texas are dissimilar from the roll fronts of the Wyoming basins. The host sands for many of the deposits contain essentially no carbonaceous plant material, only abundant disseminated pyrite. Many of the deposits do not occur at the margin of altered (ferric oxide-bearing) sandstone tongues but rather occur entirely within reduced, pyurite-bearing sandstone. The abundance of pyrite within the sands probably reflects the introduction of H/sub 2/S up along faults from hydrocarbon accumulations at depth. Such introductions before ore formation prepared the sands for roll-front development, whereas post-ore introductions produced re-reduction of portions of the altered tongue, leaving the deposit suspended in reduced sandstone. Evidence from three deposits suggests that ore formation was not accompanied by the introduction of significant amounts of H/sub 2/S.

  1. Cyclicity recorded in the provenance sandstones in the sedimentary in fill of the Cameros basin (N. Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Acebron, L.; Arribas, J.; Omodeo-Sale, S.; Arribas, E.; Le Pera, E.; Mas, R.; Lopez-Elorza, M.; Fernandez-Diaz, P. R.

    2013-06-01

    The intra plate Cameros rift basin in the north of Spain was formed came into being between the Tithonian and the Early Albian and contains 9 000 m of mostly continental sediments. This basin is a good example of cyclicity of different depositional sequences (DSs) in sedimentary environments, which show clear repetition in their sandstone composition (petrofacies) and diagenetic patterns. The DSs are arranged in two mega sequences (MSs) separated by a tectonic unconformity. A similar vertical sandstone compositional evolution, subdivided into two stages that repeat cyclically, has been recognised in both MSs: the first comprises quartzo-sedimentolithic petrofacies and the second is made up of several quartzo-feldspathic petrofacies. This was caused by a progression from the recycling of the pre-rift sedimentary cover to the erosion of the mainly plutonic and metamorphic crystalline basement. These changes in the erosion of the different source areas were conditioned by the tectonics of the basin. Furthermore, the original sandstone framework composition conditioned the diagenetic pattern of the two stages: quartzo-sedimentolithic sandstones containing large amounts of very pervasive carbonate cement that reduce their original porosity considerably, and quartzo-feldspathic petrofacies with a rigid framework that maintained the original pores during burial diagenesis. This compositional and diagenetic pattern is probably applicable to other non-volcanic rifted basins, depending upon the original amount of carbonate rock fragments present. (Author)

  2. Geology and ground-water in western Santa Cruz County, California, with particular emphasis on the Santa Margarita Sandstone

    Science.gov (United States)

    Akers, J.P.; Jackson, L.E.

    1977-01-01

    The water-bearing potential of the geologic formations in the western part of Santa Cruz County, Calif., is evaluated. Most of the sedimentary formations in this area are fine-grained rocks of Tertiary age that have been folded and faulted. These rocks, in general, yield supplies of water sufficient only for individual domestic supplies. The Lompico and Santa Margarita Sandstones, however, are coarser grained and have the potential to yield moderate quantities of water (50-100 gallons per minute). Areas where the Lompico Sandstone might warrant explorations are (1) near and on the west side of the Ben Lomond fault, (2) near and south of the outcrop of the Lompico Sandstone between Ben Lomond and Felton, and (3) in the area near Bald Mountain School. The Santa Margarita Sandstone should be explored by test drilling in the area between Davenport and Bonnie Doon. The quality of ground water is generally good, although saline water occurs in the San Lorenzo Formation near Redwood Grove and Riverside Grove. (Woodard-USGS)

  3. Alteration of Mesoscopic Properties and Mechanical Behavior of Sandstone Due to Hydro-Physical and Hydro-Chemical Effects

    Science.gov (United States)

    Qiao, Liping; Wang, Zhechao; Huang, Anda

    2017-02-01

    The hydro-physical and hydro-chemical interactions between groundwater and a rock mass can lead to changes in the mineral composition and structure of the rock (e.g., generation of voids and dissolution pores and an increase in the porosity), thereby altering the macroscopic mechanical characteristics of the rock mass. Sandstone specimens were saturated with distilled water and five aqueous solutions characterized by various ion concentrations and pH values for several months, and their porosity was measured in real time. Simultaneously, the concentration and pH of each aqueous solution were monitored every 30 days. The results indicate that after immersion in the aqueous solutions for 180 days, the porosity of the sandstone specimens and the ion concentrations and pH of the aqueous solutions tended to stabilize. Then, the immersed sandstone specimens were analyzed in thin section and subjected to computerized tomography scanning. It turns out that the mineral composition and structure of the specimens had all changed to various degrees. Finally, the uniaxial compression tests were conducted on the sandstone specimens to analyze the effects of the hydro-physical and hydro-chemical alteration on the macroscopic mechanical characteristics of the rock (e.g., the stress-strain relationship, elastic modulus, and peak strength). The results of this study can serve as a reference for investigations into theories and applications of water-rock interactions and for research in related fields.

  4. Petrological features of selected components of the Cergowa sandstones (Outer Carpathians) recorded by scanning electron microscopy - preliminary study

    Science.gov (United States)

    Pszonka, Joanna

    2017-11-01

    The scanning electron microscope analysis of the Cergowa sandstones brings new data on their petrological features and chemical composition. Previous work in standard petrographic examination, e.g. polarising (PL) or cathodoluminescence (CL) microscopy, displayed limited information on grain surface topography and only assumptions to their geochemistry. Both identification and characterisation of minerals are fundamental in the progress of mining and minerals processing systems. Detrital grains of the Cergowa sandstones are bound by calcite and dolomitic cement and commonly corroded by diagenetic fluids, however, in varying degrees, which is illustrated here by feldspar, quartz and dolomite minerals. Dissolution processes of marginal parts of these mineral grains resulted in corrosion, which increased the contact surface between the grains and the cement. The difference in resistance to these processes was observed not only among distinct groups of minerals, but also within the group of feldspars: between K-feldspars and minerals of plagioclase. That combination resulted in exceptionally strong cementation of the Cergowa sandstones, which is expressed by their high hardness and resistance to abrasion, freezing, and thawing. Inherent parameters of sandstones are characterised by their petrographical properties.

  5. Ecological restoration and soil improvement performance of the seabuckthorn flexible dam in the Pisha Sandstone area of Northwestern China

    Science.gov (United States)

    Yang, F. S.; Cao, M. M.; Li, H. E.; Wang, X. H.; Bi, C. F.

    2014-09-01

    Soil erosion of the Pisha Sandstone area of Loess Plateau is extremely severe in China. The Pisha Sandstone is very hard when it is dry, while it is very frail when wet. The seabuckthorn flexible dam (SFD), a type of ecological engineering, was proposed to control soil erosion and meliorate soil within the Pisha Sandstone area. To assess its effectiveness and the ecological restoration and soil improvement performance, a field experiment was conducted in this area. We found the strong sediment retention capacity of the SFD is the basis of using it to restore the ecosystem. We compared some certain ecological factors and soil quality between a gully with the SFD and a gully without the SFD, including soil moisture, soil organic matter (SOM), soil nutrients (including Ammonia Nitrogen, available phosphorus and Potassium), vegetation coverage and biodiversity. The results showed that the SFD exhibits excellent performance for ecological restoration and soil improvement of this area. The results are as follows: (i) by the sediment retention action, the deposition commonly occurred in the SFD gully, and the deposition patterns are obviously different from upper to lower gully, (ii) more surprisingly, unlike trees or other shrubs, the seabuckthorn has good horizontal extending capacity by its root system, (iii) soil moisture, SOM, soil nutrients, vegetation coverage and biodiversity in the vegetated gully with the SFD are all markedly increased. The results showed the SFD is both effective and novel biological measure for ecological restoration and soil improvement within the Pisha Sandstone area.

  6. A GIS-based model of potential groundwater yield zonation for a sandstone aquifer in the Juye Coalfield, Shangdong, China

    Science.gov (United States)

    Yin, Huiyong; Shi, Yongli; Niu, Huigong; Xie, Daolei; Wei, Jiuchuan; Lefticariu, Liliana; Xu, Shuanxiang

    2018-02-01

    Resolving the potential groundwater yield zonation of sandstone aquifers occurring at depths of several hundred meters has been an important and challenging objective of the hydrogeological research focused on preventing flood hazards in coal mines. Using accessible geological exploration data we put forward a method of predicting the spatial distribution of groundwater storage potential in sandstone aquifers from Permian-age coal deposits in Juye Coalfield, Shangdong, China. A Geological, Tectonic and Lithological Composition Index (GTLCI) model was created using the following parameters: sandstone depth and thickness, faults length density (FaLD), faults density (FaD), fault frequency density (FaFD), fault scale density (FaSD), variation coefficient of the slope (VCS) of the coal seam, intensity index of folds in horizontal direction (IIFoH), and lithological composition index (LCI). Each of these factors was subsequently divided into 5 classes. The analytic hierarchy process (AHP) and trapezoidal fuzzy number (TFN) method was applied to calculate the weight of the conditioning factor and their respective sub-classes. Groundwater yield potential contour map, which was initially constructed using the GTLCI values revealed four groundwater abundance zones. The map was further refined by taking into account hydrogeologic data collected during mining activities. The GTLCI model predictive success rate of 80% was explained by the limited number of boreholes available for validation. It is considered that the GTLCI model is effective at predicting zonation of groundwater yield in the sandstone aquifers from Permian- age coal deposits in Juye Coalfield, China.

  7. An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir

    Science.gov (United States)

    Pratama, Edo; Suhaili Ismail, Mohd; Ridha, Syahrir

    2017-06-01

    The identification, characterization and evaluation of low resistivity pay is very challenging and important for the development of oil and gas fields. Proper identification and characterization of these reservoirs is essential for recovering their reserves. There are many reasons for low resistivity pay zones. It is crucial to identify the origin of this phenomenon. This paper deals with the identification, characterization and evaluation of low resistivity hydrocarbon-bearing sand reservoirs in order to understand the low resistivity phenomenon in a sandstone reservoir, the characterization of the rock types and how to conduct petrophysical analysis to accurately obtain petrophysical properties. An integrated workflow based on petrographical, rock typing and petrophysical methods is conducted and applied. From the integrated analysis that was performed, the presence of illite and a mixed layer of illite-smectite clay minerals in sandstone formation and pyrite-siderite conductive minerals was identified as one of the main reasons for low resistivity occurence in sandstone reservoirs. These clay minerals are distributed as a laminated-dispersed shale distribution model in sandstone reservoirs. The dual water method is recommended to calculate water saturation in low resistivity hydrocarbon-bearing sand reservoirs as this method is more accurate and does not result in an over estimation in water saturation calculation.

  8. Direct Shear Tests of Sandstone Under Constant Normal Tensile Stress Condition Using a Simple Auxiliary Device

    Science.gov (United States)

    Cen, Duofeng; Huang, Da

    2017-06-01

    Tension-shear failure is a typical failure mode in the rock masses in unloading zones induced by excavation or river incision, etc., such as in excavation-disturbed zone of deep underground caverns and superficial rocks of high steep slopes. However, almost all the current shear failure criteria for rock are usually derived on the basis of compression-shear failure. This paper proposes a simple device for use with a servo-controlled compression-shear testing machine to conduct the tension-shear tests of cuboid rock specimens, to test the direct shear behavior of sandstone under different constant normal tensile stress conditions ( σ = -1, -1.5, -2, -2.5 and -3 MPa) as well as the uniaxial tension behavior. Generally, the fracture surface roughness decreases and the proportion of comminution areas in fracture surface increases as the change of stress state from tension to tension-shear and to compression-shear. Stepped fracture is a primary fracture pattern in the tension-shear tests. The shear stiffness, shear deformation and normal deformation (except the normal deformation for σ = -1 MPa) decrease during shearing, while the total normal deformation containing the pre-shearing portion increases as the normal tensile stress level (| σ|) goes up. Shear strength is more sensitive to the normal tensile stress than to the normal compressive stress, and the power function failure criterion (or Mohr envelope form of Hoek-Brown criterion) is examined to be the optimal criterion for the tested sandstone in the full region of tested normal stress in this study.

  9. [Species Determination and Spectral Characteristics of Swelling Clay Minerals in the Pliocene Sandstones in Xinghai, Qinghai].

    Science.gov (United States)

    Wang, Chao-wen; Chen, Jiang-jun; Fang, Qian; Yin, Ke; Hong, Han-lie

    2015-10-01

    X-ray diffraction (XRD) and Fourier infrared absorption spectroscopy (FTIR) were conducted to deepen our research on specific species and spectral characteristics of swelling clay minerals in the Pliocene sandstones in Xinghai, Qinghai province. XRD results show that swelling clay minerals are dominant clay minerals in the sandstones, which can be up to 97% in percentage. XRD patterns show 060 reflections of the samples occur both remarkably at 1.534 Å and 1.498 Å, indicating the samples contain physical mixtures of trioctahedral and dioctahedral swelling clay minerals, respectively. Further treatment of Li-300 degrees C heat and glycerol saturation shows the swelling clay minerals collapse to 9.3-9.9 Å with a partial expansion to -18 Å. This indicates the swelling clay minerals dominate montmorillonite and contain minor saponite. The montmorillonite shows no swelling after Li-300 degrees C heat and glycerol saturation because of Li+ inserting into the octahedral layers, which balances the layer charge caused by the substitution of Mg to Al. FTIR results show the samples are composed of a kind of phyllosilicate with absorbed and structural water, which is in agreement with the results of XRD. Absorbed peaks at 913, 842, 880 cm(-1), corresponding to OH associated with Al-Al, Al-Mg, and Al-Fe pairs, further indicates the minerals are dominant dioctahedron in structure. Meanwhile, absorbed peaks at 625 and 519 cm(-1), corresponding to coupled Si-O and Al-O-Si deformation, indicates parts of Si is replaced by Al in tetrahedron. The spectral characteristics of the samples are against the presence of beidellite and nontronite based on the results of XRD and FTIR, while demonstrating an,existence of montmorillonite. This study, to distinguish the specific species of swelling clay species in clay minerals, would be of great importance when using clay mineralogy to interpret provenance and climatic information.

  10. Depositional and diagenetic variability within the Cambrian Mount Simon Sandstone: Implications for carbon dioxide sequestration

    Science.gov (United States)

    Bowen, B.B.; Ochoa, R.I.; Wilkens, N.D.; Brophy, J.; Lovell, T.R.; Fischietto, N.; Medina, C.R.; Rupp, J.A.

    2011-01-01

    The Cambrian Mount Simon Sandstone is the major target reservoir for ongoing geologic carbon dioxide (CO2) sequestration demonstrations throughout the midwest United States. The potential CO2 reservoir capacity, reactivity, and ultimate fate of injected CO2 depend on textural and compositional properties determined by depositional and diagenetic histories that vary vertically and laterally across the formation. Effective and efficient prediction and use of the available pore space requires detailed knowledge of the depositional and diagenetic textures and mineralogy, how these variables control the petrophysical character of the reservoir, and how they vary spatially. Here, we summarize the reservoir characteristics of the Mount Simon Sandstone based on examination of geophysical logs, cores, cuttings, and analysis of more than 150 thin sections. These samples represent different parts of the formation and depth ranges of more than 9000 ft (>2743 m) across the Illinois Basin and surrounding areas. This work demonstrates that overall reservoir quality and, specifically, porosity do not exhibit a simple relationship with depth, but vary both laterally and with depth because of changes in the primary depositional facies, framework composition (i.e., feldspar concentration), and diverse diagenetic modifications. Diagenetic processes that have been significant in modifying the reservoir include formation of iron oxide grain coatings, chemical compaction, feldspar precipitation and dissolution, multiple generations of quartz overgrowth cementation, clay mineral precipitation, and iron oxide cementation. These variables provide important inputs for calculating CO2 capacity potential, modeling reactivity, and are also an important baseline for comparisons after CO2 injection. Copyright ??2011. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

  11. Naturally weathered feldspar surfaces in the Navajo Sandstone aquifer, Black Mesa, Arizona: Electron microscopic characterization

    Science.gov (United States)

    Zhu, Chen; Veblen, D.R.; Blum, A.E.; Chipera, S.J.

    2006-01-01

    Naturally weathered feldspar surfaces in the Jurassic Navajo Sandstone at Black Mesa, Arizona, was characterized with high-resolution transmission and analytical electron microscope (HRTEM-AEM) and field emission gun scanning electron microscope (FEG-SEM). Here, we report the first HRTEM observation of a 10-nm thick amorphous layer on naturally weathered K-feldspar in currently slightly alkaline groundwater. The amorphous layer is probably deficient in K and enriched in Si. In addition to the amorphous layer, the feldspar surfaces are also partially coated with tightly adhered kaolin platelets. Outside of the kaolin coatings, feldspar grains are covered with a continuous 3-5 ??m thick layer of authigenic smectite, which also coats quartz and other sediment grains. Authigenic K-feldspar overgrowth and etch pits were also found on feldspar grains. These characteristics of the aged feldspar surfaces accentuate the differences in reactivity between the freshly ground feldspar powders used in laboratory experiments and feldspar grains in natural systems, and may partially contribute to the commonly observed apparent laboratory-field dissolution rate discrepancy. At Black Mesa, feldspars in the Navajo Sandstone are dissolving at ???105 times slower than laboratory rate at comparable temperature and pH under far from equilibrium condition. The tightly adhered kaolin platelets reduce the feldspar reactive surface area, and the authigenic K-feldspar overgrowth reduces the feldspar reactivity. However, the continuous smectite coating layer does not appear to constitute a diffusion barrier. The exact role of the amorphous layer on feldspar dissolution kinetics depends on the origin of the layer (leached layer versus re-precipitated silica), which is uncertain at present. However, the nanometer thin layer can be detected only with HRTEM, and thus our study raises the possibility of its wide occurrence in geological systems. Rate laws and proposed mechanisms should consider the

  12. Water weakening during semibrittle flow and faulting of experimentally deformed quartz sandstone

    Science.gov (United States)

    Kanaya, T.; Hirth, G.

    2015-12-01

    Triaxial compression experiments were conducted on Fontainebleau sandstone at temperatures to 900°C and effective pressures to 175 MPa with varying water contents. Both yield and peak strengths associated with semibrittle faulting decrease linearly with an increase in intragranular water concentration (COH); COH is determined from infrared spectroscopy. Microstructural observations and the influence of strain rate, temperature, and COH on peak strength suggest that transient semibrittle flow is accommodated through cataclasis assisted by stress-corrosion microcracking. The roles of the experimental variables on the constitutive behavior are similar to those reported for subcritical cracking of quartz single crystals. At high COH, microstructural observations indicate an increase in the relative contribution of mm-scale distributed shear fractures (bands) to axial strain, reflecting a reduction in grain-scale fracture toughness. This is consistent with the inference that highly dissipative shear fractures lead to the observed reduction in strength at high COH. Stress vs. strain rate data for transient semibrittle flow show temperature-dependent rate behavior, and are well fit by an exponential law with an activation enthalpy of 185 to 250 kJ/mol and Peierls stress of 2.5 to 7.5 GPa. Using these constraints, we infer that stress-corrosion cracking is rate-limited by the dislocation activity at crack tips. Correlation of microscale COH maps to microstructures suggests that intragranular water in the undeformed sandstone is associated mainly with clusters of fluid inclusions, resulting in a highly nonuniform distribution of COH both within and between grains. Axially deformed samples show a reduction in the median and variability of COH over a range of length scales. We observe that a local reduction in COH correlates with fluid inclusions that are decrepitated and crosscut by intragranular fractures. We conclude that intragranular fracture is the primary mechanism of

  13. Lithologic characteristics and diagenesis of the Devonian Jauf sandstone at Ghawar Field, Eastern Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al Ramadan, K.A.; Hussain, M. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Dept. of Earth Sciences; Imam, B. [Dhaka Univ. (Bangladesh). Dept. of Geology; Saner, S. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Research Inst.

    2004-12-01

    The Lower Devonian Jauf Formation in Saudi Arabia is an important hydrocarbon reservoir. However, in spite of its importance as a reservoir, published studies on the Jauf Formation more specifically on the reservoir quality (including diagenesis), are very few. This study, which is based on core samples from two wells in the Ghawar Field, northeastern Saudi Arabia, reports the lithologic and diagenetic characteristics of this reservoir. The Jauf reservoir is a fine to medium-grained, moderate to well-sorted quartz arenite. The diagenetic processes recognized include compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of the calcite cements and of feldspar grains. The widespread occurrences of early calcite cement suggest that the Jauf reservoir lost a significant amount of primary porosity at a very early stage of its diagenetic history. Early calcite cement, however, prevented the later compaction of the sandstone, thus preserving an unfilled part of the primary porosity. Based on the framework grain-cement relationships, precipitation of the early calcite cement was either accompanied or followed by the development of part of the pore-lining and pore-bridging clay cement. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late calcite cement occurs as isolated patches, and has little impact on reservoir quality of the sandstones. In addition to calcite, several different clay minerals including illite and chlorite occur as pore-filling and pore-lining cements. While the pore-filling illite and chlorite resulted in a considerable loss of porosity, the pore-lining chlorite may have helped in retaining the porosity by preventing the precipitation of syntaxial quartz overgrowths. Illite, which largely occurs as hair-like rims around the grains and bridges on the pore throats, caused a substantial deterioration to permeability of the

  14. Pumping-Test Evaluation of Fault-Zone Hydraulic Properties in a Fractured Sandstone

    Science.gov (United States)

    Johnson, N. M.

    2014-12-01

    Subzones of both reduced and enhanced permeability are often ascribed to fault zones, consistent with a fault-core/damage-zone conceptualization, with associated implications for assessing potential contaminant transport. Within this context, a 31-day pumping test was conducted in relation to a relatively minor, 2000 m long fault zone cutting fractured Cretaceous sandstone interbedded with siltstone and shale at a groundwater remediation site in the Simi Hills of southern California during March-April 2013. Our objective was to evaluate the potential hydrogeologic influence of the fault zone on groundwater movement across and along it by observing the spatial patterns of drawdown and estimated hydraulic properties. A 122 m deep open borehole was pumped at a constant rate of approximately 112 L/min while monitoring hydraulic heads in 14 observation wells, two completed with multi-level systems, within 750 m of the pumping well. Hydraulic heads were monitored for more than 9 months before, during, and after the test. Prior to the test, we used the site's three-dimensional, equivalent-porous-media groundwater flow model to anticipate the potential response of alternative fault-zone permeability structures. The results suggest that the fault zone may be slightly more permeable (by a factor of about 2 or less) and less confined than the fractured sandstone away from the fault, and is not a significant barrier to groundwater flow across it. Within the areal extent of observed drawdown, the site's hydrostratigraphic structures exhibited a relatively greater hydraulic influence. The pattern and magnitude of observed drawdown lie within the range of pre-test model simulations, and the test results are now being used to revise and recalibrate the model.

  15. A Comparative Study of Different Acids used for Sandstone Acid Stimulation: A Literature Review

    Science.gov (United States)

    Van Hong, Leong; Ben Mahmud, Hisham

    2017-07-01

    Matrix acidizing is an effective well stimulation technique, in which acids are injected at a pressure below the formation fracture pressure. The application of sandstone matrix acidizing has been widely used in the oil and gas industry for many decades. The application of mud acid, which is a combination of Hydrofluoric acid and Hydrochloric acid (HF:HCl) in well stimulation, has gained its popularity in improving the porosity and permeability of reservoir formation. In fact, this is driven by the effectiveness of HF in dissolving minerals in sandstone and HCl in controlling precipitation. Nonetheless, high temperature matrix acidizing approach is in growing need since many wells nowadays are producing from much deeper and hotter reservoir, with a temperature higher than 200°F. In such conditions, mud acid causes rapid reaction rates, hence becoming less efficient as the acids are consumed too early. Furthermore, mud acid is hazardous and very corrosive. On the contrary, previous studies had shown that Fluoroboric Acid (HBF4) and Phosphoric acid (H3PO4) offered numerous advantages in comparison to the conventional mud acid. HBF4 can hydrolyze to form HF whereas H3PO4 acts as a buffer acid; which is able to penetrate deeper into the formation before spending. Likewise, both acids cause more increase in the permeability, less change in the strength of core samples and significantly less corrosive. This paper had critically reviewed the experimental works which had been done on different types of acids. The advantages and disadvantages of these acids are evaluated. Therefore, a new acid combination (HBF4:H3PO4) is developed and the future work which can be done on it is proposed.

  16. CO{sub 2} Injectivity, Storage Capacity, Plume Size, and Reservoir and Seal Integrity of the Ordovician St. Peter Sandstone and the Cambrian Potosi Formation in the Illnois Basin

    Energy Technology Data Exchange (ETDEWEB)

    Leetaru, Hannes; Brown, Alan; Lee, Donald; Senel, Ozgur; Coueslan, Marcia

    2012-05-01

    The Cambro-Ordovician strata of the Illinois and Michigan Basins underlie most of the states of Illinois, Indiana, Kentucky, and Michigan. This interval also extends through much of the Midwest of the United States and, for some areas, may be the only available target for geological sequestration of CO{sub 2}. We evaluated the Cambro-Ordovician strata above the basal Mt. Simon Sandstone reservoir for sequestration potential. The two targets were the Cambrian carbonate intervals in the Knox and the Ordovician St. Peter Sandstone. The evaluation of these two formations was accomplished using wireline data, core data, pressure data, and seismic data from the USDOE-funded Illinois Basin Decatur Project being conducted by the Midwest Geological Sequestration Consortium in Macon County, Illinois. Interpretations were completed using log analysis software, a reservoir flow simulator, and a finite element solver that determines rock stress and strain changes resulting from the pressure increase associated with CO{sub 2} injection. Results of this research suggest that both the St. Peter Sandstone and the Potosi Dolomite (a formation of the Knox) reservoirs may be capable of storing up to 2 million tonnes of CO{sub 2} per year for a 20-year period. Reservoir simulation results for the St. Peter indicate good injectivity and a relatively small CO{sub 2} plume. While a single St. Peter well is not likely to achieve the targeted injection rate of 2 million tonnes/year, results of this study indicate that development with three or four appropriately spaced wells may be sufficient. Reservoir simulation of the Potosi suggest that much of the CO{sub 2} flows into and through relatively thin, high permeability intervals, resulting in a large plume diameter compared with the St. Peter.

  17. Cross-bedding Related Anisotropy and its Role in the Orientation of Joints in an Aeolian Sandstone

    Science.gov (United States)

    Deng, S.; Cilona, A.; Mapeli, C.; Panfilau, A.; Aydin, A.; Prasad, M.

    2014-12-01

    Previous research revealed that the cross-bedding related anisotropy in aeolian sandstones affects the orientation of compaction bands, also known as anticracks. We hypothesize that cross-bedding should a have similar influence on the orientation of the joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the cross-beds and the cross-bed package confined joints in the Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada. The field data demonstrates that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. This shows that the cross-bed orientation and the associated anisotropy also exert a strong control on the formation and orientation of the joints. In order to characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples in the laboratory using a bench-top ultrasonic assembly. The measured P-wave anisotropy is about 13% on average. Based on these results, a numerical model based on the generalized Hooke's law for anisotropic materials is analyzed assuming the cross-bedded sandstone to be transversely isotropic. Using this model, we tested various cross-bed orientations as well as different strain boundary conditions (uniaxial, axisymmetric and triaxial). It is possible to define a boundary condition under which the modeled results roughly match with the observed relationship between cross-bed package confined joints and cross-beds. These results have important implications for fluid flow through aeolian sandstones in reservoirs and aquifers.

  18. Actual laser removal of black soiling crust from siliceous sandstone by high pulse repetition rate equipment: effects on surface morphology

    Directory of Open Access Journals (Sweden)

    Iglesias-Campos, M. A.

    2016-03-01

    Full Text Available This research project studies the role of pulse repetition rate in laser removal of black soiling crust from siliceous sandstone, and specifically, how laser fluence correlates with high pulse repetition rates in cleaning practice. The aim is to define practical cleaning processes and determine simple techniques for evaluation based on end-users’ perspective (restorers. Spot and surface tests were made using a Q-switched Nd:YAG laser system with a wide range of pulse repetition rates (5–200 Hz, systematically analysed and compared by macrophotography, portable microscope, stereomicroscope with 3D visualizing and area roughness measurements, SEM imaging and spectrophotometry. The results allow the conclusion that for operation under high pulse repetition rates the average of total energy applied per spot on a treated surface should be attendant upon fluence values in order to provide a systematic and accurate description of an actual laser cleaning intervention.En este trabajo se estudia el papel de la frecuencia de repetición en la limpieza láser de costras de contaminación sobre una arenisca silícea, y concretamente, como se relaciona fluencia y frecuencias elevadas en una limpieza real. Se pretende definir un procedimiento práctico de limpieza y determinar técnicas sencillas de evaluación desde el punto de vista de los usuarios finales (restauradores. Para el estudio se realizaron diferentes ensayos en spot y en superficie mediante un equipo Q-switched Nd:YAG con un amplio rango de frecuencias (5–200 Hz, que se analizaron y compararon sistemáticamente mediante macrofotografía, microscopio portátil, estereomicroscopio con visualización 3D y mediciones de rugosidad en área, imágenes SEM y espectrofotometría. Los resultados permiten proponer que, al trabajar con altas frecuencias, la media de la energía total depositada por spot en la superficie debería acompañar los valores de fluencia para describir y comprender mejor una

  19. Nivelstein sandstone, weakly lithified pure silica sands from the Dutch-German border area, intermittently used in architecture for two millennia

    Science.gov (United States)

    Nijland, Timo G.; Wim Dubelaar, C.

    2017-04-01

    The current paper provides a concise overview of the geological setting of the Nivelstein sandstone in broad sense, its petrographic and physical characteristics, and its use as natural stone. Miocene pure silica sands occur around Heerlen in the southeastern part of the Dutch province of Limburg and Herzogenrath in adjacent Germany, as well as in the Belgian province of Limburg near Opgrimbie. In Dutch Limburg and in Germany are three large active exploitations, quarrying the sands for industrial purposes. On top of the unconsolidated sands in the Herzogenrath quarry, lithified banks of sandstone occur, known as Nivelstein (or more rarely Herzogenrath) sandstone. This sandstone has been used as dimension stone and ornamental stone since Roman times. In the 11th century the quarry was reopened and after a long period of disuse sandstone blocks were again quarried in the second half of the 19th century. The lithification of the Nivelstein sandstone usually is very weak, with grain to grain contacts and some newly formed quartz rims only. The clay content is extremely low and is restricted to tiny booklets of kaolinite. Despite the weak cementation the Nivelstein sandstone has proved to be very time-resistant building stone that forms a major element in the stone cultural heritage of the Dutch- German border area.

  20. Diagenesis, provenance and reservoir quality of Triassic TAGI sandstones from Ourhoud field, Berkine (Ghadames) Basin, Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, C.; Arribas, J.; Tortosa, A. [Universidad Complutense de Madrid, (Spain). Departamento de Petrologia y Geoquimica; Kalin, O. [Universidad Complutense, Madrid (Spain). Departamento de Paleontologia

    2002-02-01

    The Triassic TAGI (Trias Argilo-Greseux Inferieur) fluvial sandstones are the main oil reservoirs in the Berkine Basin, Algeria. Nonetheless, their provenance and diagenesis, and their impact on reservoir quality, are virtually unknown. Samples from the Ourhoud field, representing the Lower, Middle and Upper TAGI subunits, were studied using a combination of petrographic, mineralogical and geochemical techniques. The Lower TAGI sandstones have an average framework composition of Q{sub 98.3}F{sub 0.6}R{sub 1.1} and 95% of the quartz grains are monocrystalline. By contrast, the Middle-Upper TAGI sandstones have an average framework composition of Q{sub 88.3}F{sub 9.8}R{sub 1.9} and 79% of the quartz grains are monocrystalline. The Lower TAGI quartz arenites derived from Paleozoic siliclastic rocks, whereas the Middle-Upper TAGI subarkoses originated mainly from metamorphic terrains. This change in provenance is a potential criterion for correlation within the TAGI. Also, this change has contributed to the significantly different diagenetic paths followed by the Lower TAGI quartz arenites and the Middle-Upper TAGI subarkoses. Grain-coating illitic clays are abundant in the Lower TAGI, where they exert a critical control on reservoir quality. These clays are interpreted as pedogenic and/or infiltrated in origin and to have had, in part, smectitic precursors. Shallow burial Fe-dolomite cementation was favored in the downthrown block of the field-bounding fault, where it contributed to the poor reservoir quality. Magnesite-siderite cements are multiphase. The earliest generation is composed of Fe-rich magnesite that precipitated during shallow burial from hypersaline fluids with high Mg/Ca ratios, probably refluxed residual brines associated with the Liassic evaporites. Later magnesite-siderite generations precipitated during deeper burial from waters with progressively higher Fe/Mg ratios. Authigenic vermicular kaolin largely consists of dickite that replaced previously

  1. Micro-Ct Imaging of Multi-Phase Flow in Carbonates and Sandstones

    Science.gov (United States)

    Andrew, M. G.; Bijeljic, B.; Blunt, M. J.

    2013-12-01

    One of the most important mechanisms that limits the escape of CO2 when injected into the subsurface for the purposes of carbon storage is capillary trapping, where CO2 is stranded as pore-scale droplets (ganglia). Prospective storage sites are aquifers or reservoirs that tend to be at conditions where CO2 will reside as a super-critical phase. In order to fully describe physical mechanisms characterising multi-phase flow during and post CO2 injection, experiments need to be conducted at these elevated aquifer/reservoir conditions - this poses a considerable experimental challenge. A novel experimental apparatus has been developed which uses μCT scanning for the non-invasive imaging of the distribution of CO2 in the pore space of rock with resolutions of 7μm at temperatures and pressures representative of the conditions present in prospective saline aquifer CO2 storage sites. The fluids are kept in chemical equilibrium with one-another and with the rock into which they are injected. This is done to prevent the dissolution of the CO2 in the brine to form carbonic acid, which can then react with the rock, particularly carbonates. By eliminating reaction we study the fundamental mechanisms of capillary trapping for an unchanging pore structure. In this study we present a suite of results from three carbonate and two sandstone rock types, showing that, for both cases the CO2 acts as the non-wetting phase and significant quantities of CO2 is trapped. The carbonate examined represent a wide variety of pore topologies with one rock with a very well connected, high porosity pore space (Mt Gambier), one with a lower porosity, poorly connected pore space (Estaillades) and one with a cemented bead pack type pore space (Ketton). Both sandstones (Doddington and Bentheimer) were high permeability granular quartzites. CO2 was injected into each rock, followed by brine injection. After brine injection the entire length of the rock core was scanned, processed and segmented into

  2. Building-stone used in architectural heritage: red sandstone of Astorga cathedral (Leon); Materiales utilizados en el patrimonio arquitectonico: la arenisca roja de la catedral de Astorga (Leon)

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez Martinez, R.; Alavarez Areces, E.; Menduina, J.; Martin Rubi, J. A.

    2009-07-01

    The unequivocal origin of the red sandstone used for Astorga cathedral was studied in this paper. This red sandstone presents distinctive hydrothermal minerals filling fractures, the most conspicuous are anatase crystals with characteristic habit, colour and transparency, quite rare in the region. The identification of fractures filled with this TiO{sub 2} polymorph in an abandoned sandstone quarry south of Astorga allowed us to confirm the origin of the rock used for one of the towers of Astorga cathedral. (Author) 10 refs.

  3. CO2 breakthrough pressure and permeability for unsaturated low-permeability sandstone of the Ordos Basin

    Science.gov (United States)

    Zhao, Yan; Yu, Qingchun

    2017-07-01

    With rising threats from greenhouse gases, capture and injection of CO2 into suitable underground formations is being considered as a method to reduce anthropogenic emissions of CO2 to the atmosphere. As the injected CO2 will remain in storage for hundreds of years, the safety of CO2 geologic sequestration is a major concern. The low-permeability sandstone of the Ordos Basin in China is regarded as both caprock and reservoir rock, so understanding the breakthrough pressure and permeability of the rock is necessary. Because part of the pore volume experiences a non-wetting phase during the CO2 injection and migration process, the rock may be in an unsaturated condition. And if accidental leakage occurs, CO2 will migrate up into the unsaturated zone. In this study, breakthrough experiments were performed at various degrees of water saturation with five core samples of low-permeability sandstone obtained from the Ordos Basin. The experiments were conducted at 40 °C and pressures of >8 MPa to simulate the geological conditions for CO2 sequestration. The results indicate that the degree of water saturation and the pore structure are the main factors affecting the rock breakthrough pressure and permeability, since the influence of calcite dissolution and clay mineral swelling during the saturation process is excluded. Increasing the average pore radius or most probable pore radius leads to a reduction in the breakthrough pressure and an increase by several orders of magnitude in scCO2 effective permeability. In addition, the breakthrough pressure rises and the scCO2 effective permeability decreases when the water saturation increases. However, when the average pore radius is greater than 0.151 μm, the degree of water saturation will has a little effect on the breakthrough pressure. On this foundation, if the most probable pore radius of the core sample reaches 1.760 μm, the breakthrough pressure will not be impacted by the increasing water saturation. We establish

  4. Petrophysical characterization of three commercial varieties of miocene sandstones from the Ebro valley

    Directory of Open Access Journals (Sweden)

    Gisbert, J.

    2007-08-01

    Full Text Available Miocene sandstones studied were used extensively to build Aragon’s architectural heritage, are still used in modern construction. The quarries presently located on the edge of the Ebro Valley depression. The present paper describes an exhaustive petrophysical study of these materials, which while, of the same age and from the same deposition basin, exhibit different mineralogical and textural characteristics and as a result, different physical and mechanical properties and durability. The petrographic and petrophysical characteristics of these materials were evaluated with tests prescribed in UNE (Spanish, NORMAL and ASTM standards. All the results were subjected to statistical analysis to identify possible textural and compositional nonuniformities in the material that may underlie behavioural changes. The results of the present paper show that their petrophysical characteristics afford these sandstones substantial industrial value as construction materials. Durability was found to be longest in the Alcañiz stone, as a result of the geometry of its pore network.Las areniscas miocenas estudiadas han sido y son ampliamente utilizadas en patrimonio histórico y en obra civil moderna, localizándose las canteras actuales en el borde de la depresión del Ebro. Se ha realizado un exhaustivo estudio de las características petrofísicas de estos materiales, que pese a presentar la misma edad y pertenecer a la misma cuenca sedimentaria presentan características mineralógicas y texturales diferentes que les confieren diferentes propiedades físicas, mecánicas y una diferente durabilidad. Las características petrográficas y petrofísicas se han evaluado mediante la realización de ensayos según las normas UNE, NORMAL y ASTM. Para todos los ensayos se ha realizado un tratamiento estadístico de los resultados para evaluar las posibles inhomogeneidades texturales y composicionales presentes en el material y que pueden originar modificaciones en

  5. The Effect of Hydrous Supercritical Carbon Dioxide on the Mohr Coulomb Failure Envelope in Boise Sandstone

    Science.gov (United States)

    Choens, R. C., II; Dewers, T. A.; Ilgen, A.; Espinoza, N.; Aman, M.

    2016-12-01

    Experimental rock deformation was used to quantify the relationship between supercritical carbon dioxide (scCO2), water vapor, and failure strength in an analog for Tertiary sandstone saline formation reservoirs. Storing large volumes of carbon dioxide in depleted petroleum reservoirs and deep saline aquifers over geologic time is an important tool in mitigating effects of climate change. Carbon dioxide is injected as a supercritical phase, where it forms a buoyant plume. At brine-plume interfaces, scCO2 dissolves over time into the brine, lowering pH and perturbing the local chemical environment. Previous work has shown that the resulting geochemical changes at mineral-fluid interfaces can alter rock mechanical properties, generally causing a decrease in strength. Additionally, water from the native brine can dissolve into the scCO2 plume where it is present as humidity. This study investigates the effect of hydrous scCO2 and CO2-saturated brine on shear failure of Boise sandstone. Samples are held in a hydrostatic pressure vessel at 2250 PSI confining pressure (PC) and 70 C, and scCO2 at specific humidity is circulated through the core for 24 hours at 2000 PSI and 70 C. Experiments are conducted at relative humidity levels of 0, 14, 28, 42, 56, 70, 84, 98, and 100% relative humidity. After the scCO2 core flood is finished, triaxial compression experiments are conducted on the samples at room temperature and an axial strain rate of 10-5 sec-1. Experiments are conducted at 500, 1000, and 1500 PSI PC. The results demonstrate that water present as humidity in scCO2 can reduce failure strength and lower slopes of the Mohr-Coulomb failure envelope. These effects increase with increasing humidity, as dry scCO2 does not affect rock strength, and may be influenced by capillary condensation of water films from humid scCO2. The reductions in failure strength seen in this study could be important in predicting reservoir response to injection, reservoir caprock integrity, and

  6. Numerical Analysis of a Short-Term Tracer Experiment in Fractured Sandstone

    Directory of Open Access Journals (Sweden)

    Tai-Sheng Liou

    2007-01-01

    Full Text Available A short-term, pulse injection tracer experiment conducted in fractured quartzitic sandstone at Kukuan, Taiwan was analyzed. Tracer transport at the test site was dominated by advection but a specific attenuation mechanism leading to breakthrough curve (BTC tailing also seemed to exist. Matrix diffusion was hypothesized as the transport mechanism that results in the tailing. This hypothesis was proved by comparing the field BTC with numerical simulation results obtained by the general-purpose flow/transport simulator, TOUGH2, based on a single-fracture conceptual model. Due to the lack of accuracy of estimating the interporosity flux by the conventional double porosity model (DPM, TOUGH2 was incorporated with the multiple interacting continua (MINC scheme to simulate the transient characteristics of the interporosity flux. In MINC, rock matrix is discretized as a series of continua according to the perpendicular distance from the fracture that adjoins the matrix. The closer the rock matrix is to the fracture, the finer the rock matrix is discretized. This concept is fundamentally different from DPM in that rock matrix is no longer treated as a single continuum. Simulation results by TOUGH2-MINC have successfully reproduced the observed BTC tailing even under the dominating advection effect. Sensitivity studies showed that TOUGH2-MINC is sensitive to parameters including fracture aperture (2b, matrix porosity (nm and effective molecular diffusion coefficient in matrix (Dm. If 2b, nm , Dm , are respectively 200 _ 2%, 10-11 m2 s -1, and if hydrodynamic dispersion coefficient (D is 1.69 _ m2 s -1, TOUGH2-MINC result can well fit the field BTC. Furthermore, the importance of matrix diffusion was verified by fitting the field BTC with analytical solutions that either neglect matrix diffusion or consider the mass exchange between mobile and immobile zones within the fracture as the attenuation transport mechanism. It was found that the BTC tailing can

  7. Numerical Analysis of a Short-Term Tracer Experiment in Fractured Sandstone

    Directory of Open Access Journals (Sweden)

    Tai-Sheng Liou

    2007-01-01

    Full Text Available A short-term, pulse injection tracer experiment conducted in fractured quartzitic sandstone at Kukuan, Taiwan was analyzed. Tracer transport at the test site was dominated by advection but a specific attenuation mechanism leading to breakthrough curve (BTC tailing also seemed to exist. Matrix diffusion was hypothesized as the transport mechanism that results in the tailing. This hypothesis was proved by comparing the field BTC with numerical simulation results obtained by the general-purpose flow/transport simulator, TOUGH2, based on a single-fracture conceptual model. Due to the lack of accuracy of estimating the interporosity flux by the conventional double porosity model (DPM, TOUGH2 was incorporated with the multiple interacting continua (MINC scheme to simulate the transient characteristics of the interporosity flux. In MINC, rock matrix is discretized as a series of continua according to the perpendicular distance from the fracture that adjoins the matrix. The closer the rock matrix is to the fracture, the finer the rock matrix is discretized. This concept is fundamentally different from DPM in that rock matrix is no longer treated as a single continuum. Simulation results by TOUGH2-MINC have successfully reproduced the observed BTC tailing even under the dominating advection effect. Sensitivity studies showed that TOUGH2-MINC is sensitive to parameters including fracture aperture (2b, matrix porosity (nm and effective molecular diffusion coefficient in matrix (Dm. If 2b, nm , Dm , are respectively 200 _?¿m, 2%, 10-11 m2 s -1, and if hydrodynamic dispersion coefficient (D is 1.69 ¡__n10-6 m2 s -1, TOUGH2-MINC result can well fit the field BTC. Furthermore, the importance of matrix diffusion was verified by fitting the field BTC with analytical solutions that either neglect matrix diffusion or consider the mass exchange between mobile and immobile zones within the fracture as the attenuation transport mechanism. It was found that the BTC

  8. Heat Mining or Replenishable Geothermal Energy? A Project for Advanced-Level Physics Students

    Science.gov (United States)

    Dugdale, Pam

    2014-01-01

    There is growing interest in the use of low enthalpy geothermal (LEG) energy schemes, whereby heated water is extracted from sandstone aquifers for civic heating projects. While prevalent in countries with volcanic activity, a recently proposed scheme for Manchester offered the perfect opportunity to engage students in the viability of this form…

  9. Secondary oil recovery from selected Carter sandstone oilfields -- Black Warrior Basin, Alabama. Quarterly technical progress report, September 1--November 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, J.C.

    1994-01-15

    Anderman/Smith Operating Co. is operating a secondary oil recovery project involving the Carter sandstone in northwest Alabama. The project objectives are: (1) to increase the ultimate economic recovery of oil from the Carter reservoirs, thereby increasing domestic reserves and lessening US dependence on foreign oil; (2) to extensively model, test, and monitor the reservoirs so their management is optimized; and (3) to assimilate and transfer the information and results gathered to other US oil companies to encourage them to attempt similar projects. As a result of waterflood operations at the Central Buff unit, oil production from the Fowler Brasher 7--9 well increased to 40--50 stb/d in late October, and averaged about 45 stb/d in November with no measurable water production. Production at the Fowler Dodson 8--12 was more erratic during the same period. In October, the oil rate for this well increased to nearly 17 stb/d with no reported water production. However, in November the oil production rate declined to about 9 stb/d with an associated average water rate of nearly 17 bpd. Water analysis showed that this produced water was significantly fresher than the connate water produced prior to waterflood operations. This provides evidence for early breakthrough of water injected at the Jones 7--16 well and will be an important consideration in the reservoir modeling study being performed for the unit. There has been essentially no change in the waterflood response at the North Fairview Unit during the last quarter. Oil production rates from the three producing wells have remained unchanged; that is, 3 stb/d for Smith 33-6, 2 stb/d for Perkins 33--11, and 1 stb/d for the Perkins Young 33--10 well.

  10. To the description of the temperature and pressure dependences of the thermal conductivity of sandstone and ceramics

    Science.gov (United States)

    Emirov, S. N.; Beybalaev, V. D.; Gadzhiev, G. G.; Ramazanova, A. E.; Amirova, A. A.; Aliverdiev, A. A.

    2017-11-01

    Here we present the results of an experimental study of the temperature and pressure dependences of the heat conductivity of composite compounds. The thermal conductivity of sandstone was measured by the absolute stationary method for pressures up to 400 MPa in the temperature range 273-523 K. From these experimental data we have proposed the equation describing the dependence of the thermal conductivity from the pressure and temperature. We have found that under the action of hydrostatic pressure the intensive growth of the heat-conductivity of gas-saturated sandstone is mainly up to 100 MPa, and then seamlessly switches to saturation. A comparative analysis is carried out with the experimental dependences of the thermal conductivity of ceramics (lanthanum sulfide LaS1.48).

  11. Electro-desalination of sulfate contaminated carbonaceous sandstone – risk for salt induced decay during the process

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.

    2016-01-01

    Sodium-sulphate is known to cause severe stone damage. This paper is focused on removal of this salt from carbonaceous sandstone by electro-desalination (ED). The research questions are related to possible stone damage during ED and subsequently suction cycles are made in distilled water before......, during and after ED. During suction in water the salts are concentrated in the upper part of the sandstone. After 2 days of treatment the average water soluble SO42- concentration was half the initial and for this sample corners were damaged as was the case for the reference stone. After 4 days of ED...... did not happen, though the data material is too scarce to make a final conclusion. In summary, this investigation did support that ED removes the salts without new damaging side effects in the stone....

  12. Dictyonema black shale and Triassic sandstones as potential sources of uranium

    Directory of Open Access Journals (Sweden)

    Kiegiel Katarzyna

    2015-09-01

    Full Text Available The main objective of the present study was an assessment of the possibility of uranium recovery from domestic resources in Poland. In the first stage uranium was leached from the ground uranium ore by using acidic (sulfuric acid or hydrochloric acid or alkaline (carbonate solutions. The leaching efficiencies of uranium were dependent on the type of ore and it reached 81% for Dictyonemic shales and almost 100% for sandstones. The novel leaching routes, with the application of the helical membrane contactor equipped with rotating part were tested. The obtained postleaching solutions were concentrated and purified using solvent extraction or ion exchange chromatography. New methods of solvent extraction, as well as hybrid processes for separation and purification of the product, were studied. Extraction with the use of membrane capillary contactors that has many advantages above conventional methods was also proposed as an alternative purification method. The final product U3O8 could be obtained by the precipitation of ‘yellow cake’, followed by calcination step. The results of precipitation of ammonium diuranate and uranium peroxide from diluted uranium solution were presented

  13. A Novel Method for Improving Water Injectivity in Tight Sandstone Reservoirs

    Directory of Open Access Journals (Sweden)

    Mohamad Yousef Alklih

    2014-01-01

    Full Text Available Applicability of electrokinetic effect in improving water injectivity in tight sandstone is studied. DC potential and injection rate are varied for optimization and determination of their individual impact on clay discharge and movement. The liberated clays were characterized through size exclusion microfiltration and ICP-MS analysis. Real time temperature and pH monitoring were also informative. Results showed that severalfold (up to 152% apparent increase of core permeability could be achieved. Some of the experiments were more efficient in terms of dislodgement of clays and enhanced stimulation which is supported by produced brines analysis with higher concentration of clay element. The results also showed larger quantity of clays in the produced brine in the initial periods of water injection followed by stabilization of differential pressure and electrical current, implying that the stimulation effect stops when the higher voltage gradient and flow rates are no more able to dislodge remaining clays. Additionally, fluid temperature measurement showed an increasing trend with the injection time and direct proportionality with the applied voltage. The basic theory behind this stimulation effect is predicted to be the colloidal movement of pore lining clays that results in widening of pore throats and/or opening new flow paths.

  14. Relationships between electrical properties and petrography of El-Maghara sandstone formations, Egypt

    Directory of Open Access Journals (Sweden)

    Mohamed A. Kassab

    2017-06-01

    Full Text Available Realization of electrical and petrography of rocks is absolutely necessary for geophysical investigations. The petrographical, petrophysical and electrical properties of sandstone rocks (El-Maghara Formation, North Sinai, Egypt will be discussed in the present work. The goal of this paper was to highlight interrelations between electrical properties in terms of frequency (conductivity, permittivity and impedance and petrography, as well as mineral composition. Electrical properties including (conductivity and dielectric constant were measured at room temperature and humidity of (∼35%. The frequency range used will be from 10 Hz to 100 kHz. Slight changes between samples in electrical properties were found to result from changes in composition and texture. Electrical properties generally change with grain size, shape, sorting, mineralogy and mineral composition. The dielectric constant decreases with frequency and increases with increasing clay content. The conductivity increases with the increase in conductor channels among electrodes. Many parameters can combine together to lead to the same electrical properties. The samples are mainly composed of sand with clay and carbonate.

  15. Mechanical properties of simulated Mars materials: gypsum-rich sandstones and lapilli tuff

    Science.gov (United States)

    Morrow, Carolyn; Lockner, David; Okubo, Chris

    2013-01-01

    Observations by the Mars Exploration Rover (MER) Opportunity, and other recent studies on diagenesis in the extensive equatorial layered deposits on Mars, suggest that the likely lithologies of these deposits are gypsum-rich sandstones and tuffaceous sediments (for example, Murchie and others, 2009; Squyres and others, 2012; Zimbelman and Scheidt, 2012). Of particular interest is how the diagenesis history of these sediments (degree of cementation and composition) influences the strength and brittle behavior of the material. For instance, fractures are more common in lower porosity materials under strain, whereas deformation bands, characterized by distributed strain throughout a broader discontinuity in a material, are common in higher porosity sedimentary materials. Such discontinuities can either enhance or restrict fluid flow; hence, failure mode plays an important role in determining the mechanics of fluid migration through sediments (Antonellini and Aydin, 1994; 1995; Taylor and Pollard, 2000; Ogilvie and Glover, 2001). As part of a larger study to characterize processes of fault-controlled fluid flow in volcaniclastic and gypsum-rich sediments on Mars, we have completed a series of laboratory experiments to focus on how gypsum clast content and degree of authigenic cementation affects the strength behavior of simulated Mars rocks. Both axial deformation and hydrostatic pressure tests were done at room temperature under dry conditions.

  16. Capillary pressure heterogeneity and hysteresis for the supercritical CO2/water system in a sandstone

    Science.gov (United States)

    Pini, Ronny; Benson, Sally M.

    2017-10-01

    We report results from an experimental investigation on the hysteretic behaviour of the capillary pressure curve for the supercritical CO2-water system in a Berea Sandstone core. Previous observations have highlighted the importance of subcore-scale capillary heterogeneity in developing local saturations during drainage; we show in this study that the same is true for the imbibition process. Spatially distributed drainage and imbibition scanning curves were obtained for mm-scale subsets of the rock sample non-invasively using X-ray CT imagery. Core- and subcore-scale measurements are well described using the Brooks-Corey formalism, which uses a linear trapping model to compute mobile saturations during imbibition. Capillary scaling yields two separate universal drainage and imbibition curves that are representative of the full subcore-scale data set. This enables accurate parameterisation of rock properties at the subcore-scale in terms of capillary scaling factors and permeability, which in turn serve as effective indicators of heterogeneity at the same scale even when hysteresis is a factor. As such, the proposed core-analysis workflow is quite general and provides the required information to populate numerical models that can be used to extend core-flooding experiments to conditions prevalent in the subsurface, which would be otherwise not attainable in the laboratory.

  17. Experimental evaluation on the damages of different drilling modes to tight sandstone reservoirs

    Directory of Open Access Journals (Sweden)

    Gao Li

    2017-07-01

    Full Text Available The damages of different drilling modes to reservoirs are different in types and degrees. In this paper, the geologic characteristics and types of such damages were analyzed. Then, based on the relationship between reservoir pressure and bottom hole flowing pressure corresponding to different drilling modes, the experimental procedures on reservoir damages in three drilling modes (e.g. gas drilling, liquid-based underbalanced drilling and overbalanced drilling were designed. Finally, damage simulation experiments were conducted on the tight sandstone reservoir cores of the Jurassic Ahe Fm in the Tarim Basin and Triassic Xujiahe Fm in the central Sichuan Basin. It is shown that the underbalanced drilling is beneficial to reservoir protection because of its less damage on reservoir permeability, but it is, to some extent, sensitive to the stress and the empirical formula of stress sensitivity coefficient is obtained; and that the overbalanced drilling has more reservoir damages due to the invasion of solid and liquid phases. After the water saturation of cores rises to the irreducible water saturation, the decline of gas logging permeability speeds up and the damage degree of water lock increases. It is concluded that the laboratory experiment results of reservoir damage are accordant with the reservoir damage characteristics in actual drilling conditions. Therefore, this method reflects accurately the reservoir damage characteristics and can be used as a new experimental evaluation method on reservoir damage in different drilling modes.

  18. Microscopic surface wettability electrochemical characterization of tight sandstone with infrared spectra testing

    Science.gov (United States)

    Song, L.; Ning, Z. F.; Li, N.; Zhang, B.; Ding, G. Y.

    2017-08-01

    The distribution of charge density on the surface of microscopic tight oil is studied by using Stern double electric layer theory, and the mathematical flow model of polar fluid with micro powers in tight oil reservoir is established. The Fourier transform infrared (FTIR) were used to investigate the interaction of rock surface functional groups with fluids. The results show that: (1) When the external fluid of the polar group passes through the dense micro-nano pore, it will form an electric double layer on the surface of the rock, there will be a certain thickness of the liquid membrane, the fluid migration has a certain Of the electrical viscosity effect, will have a certain flow resistance. (2) The Fourier transform infrared spectroscopy of the Chang 7 tight reservoir rock samples exists and distributes different kinds of peaks. The left peak trend determines the presence of hydroxyl groups. The four fronts and types of the right side can be used to obtain that calcium carbonate CO3 2- exists. (3) There are CO3 2- and hydroxyl functional minerals in the Chang 7 tight sandstone samples. It is consistent with the basic mineral analysis measured by X-ray diffraction. When the external fluid affects the rock surface, the surface will occur in the physical van der Waals force and chemical bond interaction, so it will affect the flow of water on the surface.

  19. Electrical conductance of a sandstone partially saturated with varying concentrations of NaCl solutions

    Science.gov (United States)

    Umezawa, R.; Nishiyama, N.; Katsura, M.; Nakashima, S.

    2017-05-01

    Electrical conductance G at 100 kHz of Berea sandstone initially saturated with varying NaCl concentrations was measured by an impedance meter at decreasing water saturation. The obtained conductance G values can be well simulated by the model equation composed of conductance of bulk pore water and that of mineral surfaces by introducing both tortuosities of bulk pore water τb and mineral surfaces τs. The surface conductivity Σs = 2.1 × 10- 10 S and the tortuosity of mineral surfaces τs = 2.6 in this equation can be valid for most of the data at varying water saturation except for the lowest water saturation (Sw = 0.05). The tortuosity of pore water τb increased from 1.7 at Sw = 1.0 to 15 at Sw = 0.05 with a power law relationship. The present electrical conduction model with double tortuosities of bulk pore water τb and mineral surfaces τs can be considered as an alternative expression of the combined Archie's first and second laws in terms of tortuosities and would be useful for describing conductance of electrolyte containing partially saturated rocks including very low water saturation.

  20. Permeability and permeability anisotropy in Crab Orchard sandstone: Experimental insights into spatio-temporal effects

    Science.gov (United States)

    Gehne, Stephan; Benson, Philip M.

    2017-08-01

    Permeability in tight crustal rocks is primarily controlled by the connected porosity, shape and orientation of microcracks, the preferred orientation of cross-bedding, and sedimentary features such as layering. This leads to a significant permeability anisotropy. Less well studied, however, are the effects of time and stress recovery on the evolution of the permeability hysteresis which is becoming increasingly important in areas ranging from fluid migration in ore-forming processes to enhanced resource extraction. Here, we report new data simulating spatio-temporal permeability changes induced using effective pressure, simulating burial depth, on a tight sandstone (Crab Orchard). We find an initially (measured at 5 MPa) anisotropy of 2.5% in P-wave velocity and 180% in permeability anisotropy is significantly affected by the direction of the effective pressure change and cyclicity; anisotropy values decrease to 1% and 10% respectively after 3 cycles to 90 MPa and back. Furthermore, we measure a steadily increasing recovery time (10-20 min) for flow parallel to cross-bedding, and a far slower recovery time (20-50 min) for flow normal to cross-bedding. These data are interpreted via strain anisotropy and accommodation models, similar to the ;seasoning; process often used in dynamic reservoir extraction.

  1. Geology and recognition criteria for roll-type uranium deposits in continental sandstones. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harshman, E.N.; Adams, S.S.

    1981-01-01

    The study of roll-type deposits during the past 20 years, since the first description of a deposit in the United States, has developed general concepts of ore formation which are accepted widely and are compatible with available data. If this were not the case the concepts would not have endured and could not have been so successfully applied to exploration using the relations of altered-unaltered sandstone. The comparative simplicity of the model, and the ease with which it has been applied to exploration have, oddly enough, probably inhibited detailed studies of ore districts that would have provided data now needed for refinement of ore controls for exploration and resource assessment programs. The most thorough study of a roll-type district was that of the Shirley Basin which is drawn on heavily in this report. The general concept of roll-type formation provides a strong basis for the development of geological observations and guides, or recognition criteria, for resource studies and exploration. Indeed, industry has been developing and using them for 20 years. As the objective of this study was to identify the most useful recognition criteria and develop a method for their systematic use in resource studies and exploration, the study is best summarized by reference to the important geological observations about roll-type deposits.

  2. Local characterisation of fluid flow in sandstone with localised deformation features through fast neutron imaging

    Directory of Open Access Journals (Sweden)

    Rowe S.

    2010-06-01

    Full Text Available Understanding fluid flow through rocks is of key interest in hydrocarbon production and CO2 sequestration, amongst other applications. Such fluid injection or extraction from subsurface reservoirs can be significantly modified (increased or decreased by deformation and in particular by localised deformation features (fractures, shear bands and compaction bands. How such deformation alters fluid flow is however not well characterised experimentally. Measurement of fluid-flow distributions throughout a specimen requires techniques that can, first, see inside a test specimen and, second, see the fluid distinctly from the solid part. Therefore, neutron absorption imaging is well adapted to fluid flow monitoring in rocks as water is largely opaque to neutrons (i.e., it is highly absorbing and rocks are generally less absorbing. In this paper we present initial results of neutron radiography monitoring of fluid-flow through samples of a sandstone containing localised deformation features (shear-bands. A comparison of flow through an intact specimen and flow through samples containing localised deformation features is presented that provides insight into the effect of localised deformation on the flow properties.

  3. Relation between electric properties and water saturation for hematitic sandstone with frequency

    Directory of Open Access Journals (Sweden)

    M. M. Gomaa

    2008-06-01

    Full Text Available This paper focuses on the effect of water saturation on A. C. electrical conductivity and dielectric constant of fully and partially saturated hematitic sandstone sample (Aswan area, Egypt. The saturation of the sample was changed from partial to full saturation. Complex resistivity measurements at room temperature (~16°C, were performed in the frequency range from 0.1 Hz to 100 KHz. Experimental electrical spectra indicate, generally, that the electrical conductivity and dielectric constant vary strongly with water saturations and frequency. The low frequency electrical conductivity and dielectric constant are mainly controlled by surface conduction and polarization of the electrical double layer. The behaviour of the electrical conductivity and dielectric constant, with increasing water content, were argued to the orientational polarization of bound water for very low saturations, displacement of the excess surface charges for relatively low saturations, and free exchange of excess ions in double layer with the bulk electrolyte and generation of transient diffusion potentials which lag behind the applied field for high saturations.

  4. The use of point load test for Dubai weak calcareous sandstones

    Directory of Open Access Journals (Sweden)

    Amr Farouk Elhakim

    2015-08-01

    Full Text Available Intact rock is typically described according to its uniaxial compressive strength (UCS. The UCS is needed in the design of geotechnical engineering problems including stability of rock slopes and design of shallow and deep foundations resting on and/or in rocks. Accordingly, a correct measurement/evaluation of the UCS is essential to a safe and economic design. Typically, the UCS is measured using the unconfined compression tests performed on cylindrical intact specimens with a minimum length to width ratio of 2. In several cases, especially for weak and very weak rocks, it is not possible to extract intact specimens with the needed minimum dimensions. Thus, alternative tests (e.g. point load test, Schmidt hammer are used to measure rock strength. The UCS is computed based on the results of these tests through empirical correlations. The literature includes a plethora of these correlations that vary widely in estimating rock strength. Thus, it is paramount to validate these correlations to check their suitability for estimating rock strength for a specific location and geology. A review of the available correlations used to estimate the UCS from the point load test results is performed and summarized herein. Results of UCS, point load strength index and Young's modulus are gathered for calcareous sandstone specimens extracted from the Dubai area. A correlation for estimating the UCS from the point load strength index is proposed. Furthermore, the Young's modulus is correlated to the UCS.

  5. Relationships between electrical properties and petrography of El-Maghara sandstone formations, Egypt

    Science.gov (United States)

    Kassab, Mohamed A.; Gomaa, Mohamed M.; Lala, Amir M. S.

    2017-06-01

    Realization of electrical and petrography of rocks is absolutely necessary for geophysical investigations. The petrographical, petrophysical and electrical properties of sandstone rocks (El-Maghara Formation, North Sinai, Egypt) will be discussed in the present work. The goal of this paper was to highlight interrelations between electrical properties in terms of frequency (conductivity, permittivity and impedance) and petrography, as well as mineral composition. Electrical properties including (conductivity and dielectric constant) were measured at room temperature and humidity of (∼35%). The frequency range used will be from 10 Hz to 100 kHz. Slight changes between samples in electrical properties were found to result from changes in composition and texture. Electrical properties generally change with grain size, shape, sorting, mineralogy and mineral composition. The dielectric constant decreases with frequency and increases with increasing clay content. The conductivity increases with the increase in conductor channels among electrodes. Many parameters can combine together to lead to the same electrical properties. The samples are mainly composed of sand with clay and carbonate.

  6. Capillarity test monitored by X-ray computer tomography in sandstones. A comparative study with standard methods

    OpenAIRE

    Ruiz de Argandoña, V.G.; Rodríguez-Rey, A.; Calleja, L.; Suárez del Río, L. M.; Celorio, C.

    2008-01-01

    Computerized axial tomography studies were conducted to analyze water movements inside rocks (specifically in La Marina sandstone, used to build some of the historic monuments in Asturias, northern Spain). The X-ray images of water uptake by the stone interior recorded during capillarity tests provided supplementary information not furnished by conventional methods. The three-dimensional images obtained showed the position of the water front over time and its relationship to rock petrography....

  7. Oolitic limestone and marine sandstone gravel aggregate \\ud Early life concrete and aggregate freeze/thaw test for durability

    OpenAIRE

    Richardson, Alan; Hemapanpairo, Kawin; Sae-Tae, Thotsaphorn; Puthipad, Nipat; Northumbria University, UK; Thammasat University, Rangsit, Thailand

    2011-01-01

    Oolitic limestone is one type of limestone which formed during the Jurassic period and can be found in large deposits in many areas of England. It can be used as coarse aggregate for concrete construction, however due to its porosity, it requires additional cement to maintain compressive strength, when compared to marine gravel (sandstone) concrete. Since freeze/thaw durability is one of the most common problems in temperate countries, this paper investigates the freeze/thaw resistance of Ool...

  8. Influence of Anisotropic Microcracking Due to Swelling on the Fracture Toughness of a Clay-Bearing Sandstone

    Science.gov (United States)

    Tiennot, M.; Mertz, J.-D.; Bourgès, A.

    2017-11-01

    Flaking is a well-known pattern on rich clay stone. As swelling of clay minerals may induce crack propagation under fatigue, a fracture mechanics approach is proposed to investigate its impact on such decay pattern. A clay-bearing sandstone from the Thüringen region is studied because of the scaling effect observed at its surface when exposed to environmental conditions. Semi-circular bending specimens adapted to stone heritage studies are prepared and three configurations are tested, in order to measure toughness with respect to the bedding of this sandstone. Deformations are measured during relative humidity variations. They are measured anisotropic due to position and orientation of the clay phases within the stone. The influence of such natural dimensional variations on Young modulus and fracture toughness is studied. It appears that the induced damage is oriented and is the consequence of opening of the initial microcracks in the direction perpendicular to the maximum swelling. This damage induces an evolution of the fracture properties and behaviour. Toughness decreases as relative humidity increases depending on the orientation of the microcracking. Moreover, the toughness anisotropy of this sandstone appears during humidification. After several cycles of swelling, the microcracking induces an increase in toughness when notch is perpendicular to them. This may explain some stone deterioration patterns, as flakes subparallel to the stone surface.

  9. Textural patterns, mineralogy, and chemistry of sandstone-related Calçadinha chalcedony (Piauí, Brazil

    Directory of Open Access Journals (Sweden)

    Marcondes Lima da Costa

    Full Text Available ABSTRACT: Paleozoic sandstones of the Parnaíba Basin, in addition to hosting opal deposits, also have occurrences of chalcedonies with potential for mineral and ornamental handicrafts, in addition to assisting the understanding of the geological evolution of the basin. However, the chalcedonies were not investigated yet, and this study intended to fulfill this gap by the investigation of the chalcedonies of Calçadinha in Piauí. Fieldwork, microtexturals analysis, X-ray diffraction and scanning electron microscopy with energy dispersive spectrometry, chemical analysis, and gemological assessments were developed. Four distinct types of chalcedonies have been distinguished. They stand out for their well distribution of Fe and Mn dendrites, which involves opal nodules, and contains microcavities with well-formed microcrystalline quartz, nontronite, and palygorskite. The mesoscopic features of these chalcedonies and cabochon and free forms cutting show potential for use in mineral crafts and semi-jewels. As expected, the chalcedonies are dominated by high contents of SiO2, besides the low and variable contents of Al2O3, Fe2O3, MgO, and TiO2. Among trace elements that show high Ba contents, bound in barite, seem also to be a geochemical signature of the country sandstones in Parnaíba basin. These chalcedonies were formed during the partial solubilization of SiO2 of sandstones, which was promoted during their tectonic formation in faults and fractures zones.

  10. Geochemical characteristics of sandstones from Cretaceous Garudamangalam area of Ariyalur, Tamilnadu, India: Implications of provenance and tectonic setting

    Science.gov (United States)

    K, Babu

    2017-06-01

    The Trichinopoly Group (later redesignated as Garudamangalam) has unconformable relationship with underlying Uttatur Group and is divided into lower Kulakanattam Formation and upper Anaipadi Formation. These calcareous sandstones are analysed major, trace and rare earth elements (REEs) to find out CIA, CIW, provenance and tectonic setting. The silica content of fossiliferous calcareous sandstone show wide variation ranging from 12.93 to 42.56%. Alumina content ranged from 3.49 to 8.47%. Higher values of Fe2O3 (2.29-22.02%) and low MgO content (0.75-2.44%) are observed in the Garudamangalam Formation. CaO (23.53-45.90) is high in these sandstones due to the presence of calcite as cementing material. Major element geochemistry of clastic rocks (Al2O3 vs. Na2O) plot and trace elemental ratio (Th/U) reveal the moderate to intense weathering of the source rocks. The Cr/Zr ratio of clastic rocks reveal with an average of 1.74 suggesting of felsic provenance. In clastic rocks, high ratios of \\sum LREE/\\sum HREE, La/Sc, Th/Sc, Th/Co, La/Co and low ratios of Cr/Zr, and positive Eu anomaly ranges from (Eu/Eu* = 1.87-5.30) reveal felsic nature of the source rocks.

  11. Assessment of undiscovered sandstone copper deposits of the Kodar-Udokan area, Russia: Chapter M in Global mineral resource assessment

    Science.gov (United States)

    Zientek, Michael L.; Chechetkin, Vladimir S.; Parks, Heather L.; Box, Stephen E.; Briggs, Deborah A.; Cossette, Pamela M.; Dolgopolova, Alla; Hayes, Timothy S.; Seltmann, Reimar; Syusyura, Boris; Taylor, Cliff D.; Wintzer, Niki E.

    2014-01-01

    Mineral resource assessments integrate and synthesize available information as a basis for estimating the location, quality, and quantity of undiscovered mineral resources. This probabilistic mineral resource assessment of undiscovered sandstone copper deposits within Paleoproterozoic metasedimentary rocks of the Kodar-Udokan area in Russia is a contribution to a global assessment led by the U.S. Geological Survey (USGS). The purposes of this study are to (1) delineate permissive areas (tracts) to indicate where undiscovered sandstone-hosted copper deposits may occur within 2 km of the surface, (2) provide a database of known sandstone copper deposits and significant prospects, (3) estimate numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provide probabilistic estimates of amounts of copper (Cu) and mineralized rock that could be contained in undiscovered deposits within each tract. The workshop for the assessment, held in October 2009, used a three-part form of mineral resource assessment as described by Singer (1993) and Singer and Menzie (2010).

  12. Displacement front behavior of near miscible CO2flooding in decane saturated synthetic sandstone cores revealed by magnetic resonance imaging.

    Science.gov (United States)

    Liu, Yu; Teng, Ying; Jiang, Lanlan; Zhao, Jiafei; Zhang, Yi; Wang, Dayong; Song, Yongchen

    2017-04-01

    It is of great importance to study the CO 2 -oil two-phase flow characteristic and displacement front behavior in porous media, for understanding the mechanisms of CO 2 enhanced oil recovery. In this work, we carried out near miscible CO 2 flooding experiments in decane saturated synthetic sandstone cores to investigate the displacement front characteristic by using magnetic resonance imaging technique. Experiments were done in three consolidated sandstone cores with the permeabilities ranging from 80 to 450mD. The oil saturation maps and the overall oil saturation during CO 2 injections were obtained from the intensity of magnetic resonance imaging. Finally the parameters of the piston-like displacement fronts, including the front velocity and the front geometry factor (the length to width ratio) were analyzed. Experimental results showed that the near miscible vertical upward displacement is instable above the minimum miscible pressure in the synthetic sandstone cores. However, low permeability can restrain the instability to some extent. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Morphostructural record of iron deposits in paleosols, cretaceous Nubia Sandstone of Lake Naser basin, Egypt, Western Desert, Egypt

    Directory of Open Access Journals (Sweden)

    S.M. Salem

    2013-06-01

    Full Text Available The use of processed Landsat ETM + images and the application of geomorphotectonic concepts supplemented by extensive geological field work enabled the effective record of iron occurrences in the area located to the west of Lake Nasser. Three clearly newly differentiated landforms are evaluated for the possible presence of iron occurrences. Each landform is controlled by a specific tectonic environment and includes one of the three stratigraphic formations hosting iron deposits in the area. These landforms are: Area 1 (Kurkur landform, including plunging anticlines and domes affecting the Abu Aggag Formation. This formation is unconformably overlain by horizontal sandstone beds belonging to the Temsah Formation. The unconformity surface includes paleosols rich in limonite, crystallized gypsum in the form of roses and clay minerals. Area 2 (Tushka landform extends to the south of the Allaqi fault. The area includes yardangs carved in horizontal sandstone beds interstratified with some hematite bed, in addition to several fragments of hematite and magnetite as wadi deposits and desert varnish. Area 3 (Abu Simbel landform includes conical hills constituted by flattened horizontal beds belonging to the El Burg Formation. Each hill is capped by thick hematite/magnetite beds extending from Tushka to the border with Sudan. The Nubia Sandstone, here, includes three formations, namely: the Abu Aggag, Temsah, and Um Baramil.

  14. Grain size statistics and depositional pattern of the Ecca Group sandstones, Karoo Supergroup in the Eastern Cape Province, South Africa

    Science.gov (United States)

    Baiyegunhi, Christopher; Liu, Kuiwu; Gwavava, Oswald

    2017-11-01

    Grain size analysis is a vital sedimentological tool used to unravel the hydrodynamic conditions, mode of transportation and deposition of detrital sediments. In this study, detailed grain-size analysis was carried out on thirty-five sandstone samples from the Ecca Group in the Eastern Cape Province of South Africa. Grain-size statistical parameters, bivariate analysis, linear discriminate functions, Passega diagrams and log-probability curves were used to reveal the depositional processes, sedimentation mechanisms, hydrodynamic energy conditions and to discriminate different depositional environments. The grain-size parameters show that most of the sandstones are very fine to fine grained, moderately well sorted, mostly near-symmetrical and mesokurtic in nature. The abundance of very fine to fine grained sandstones indicate the dominance of low energy environment. The bivariate plots show that the samples are mostly grouped, except for the Prince Albert samples that show scattered trend, which is due to the either mixture of two modes in equal proportion in bimodal sediments or good sorting in unimodal sediments. The linear discriminant function analysis is dominantly indicative of turbidity current deposits under shallow marine environments for samples from the Prince Albert, Collingham and Ripon Formations, while those samples from the Fort Brown Formation are lacustrine or deltaic deposits. The C-M plots indicated that the sediments were deposited mainly by suspension and saltation, and graded suspension. Visher diagrams show that saltation is the major process of transportation, followed by suspension.

  15. Diagenesis, compaction, and fluid chemistry modeling of a sandstone near a pressure seal: Lower Tuscaloosa Formation, Gulf Coast

    Science.gov (United States)

    Weedman, S.D.; Brantley, S.L.; Shiraki, R.; Poulson, S.R.

    1996-01-01

    Petrographic, isotopic, and fluid-inclusion evidence from normally and overpressured sandstones of the lower Tuscaloosa Formation (Upper Cretaceous) in the Gulf Coast documents quartz-overgrowth precipitation at 90??C or less, calcite cement precipitation at approximately 100?? and 135??C, and prismatic quartz cement precipitation at about 125??C. Textural evidence suggests that carbonate cement dissolution occurred before the second phases of calcite and quartz precipitation, and was followed by precipitation of grain-rimming chlorite and pore-filling kaolinite. Geochemical calculations demonstrate that present-day lower Tuscaloosa Formation water from 5500 m depth could either dissolve or precipitate calcite cements in model simulations of upward water flow. Calcite dissolution or precipitation depends on PCO2 variability with depth (i.e., whether there is one or two-phase flow) or on the rate of generation of CO2 with depth. Calculations suggest that 105-106 rock volumes of water are required to flow through the section to precipitate 1-10% calcite cement. Compaction analysis suggests that late-stage compaction occurred in normally pressured sandstones after dissolution of carbonate cements, but was hindered in overpressured sandstones despite the presence of high porosity. These results document the inhibition of compaction by overpressured fluids and constrain the timing of pressure seal formation. Modeling results demonstrate that the proposed paragenesis used to constrain timing of pressure seal formation is feasible, and that most of the cement diagenesis occurred before the pressure seal became effective as a permeability barrier.

  16. Halomonas sulfidaeris-dominated microbial community inhabits a 1.8 km-deep subsurface Cambrian Sandstone reservoir.

    Science.gov (United States)

    Dong, Yiran; Kumar, Charu Gupta; Chia, Nicholas; Kim, Pan-Jun; Miller, Philip A; Price, Nathan D; Cann, Isaac K O; Flynn, Theodore M; Sanford, Robert A; Krapac, Ivan G; Locke, Randall A; Hong, Pei-Ying; Tamaki, Hideyuki; Liu, Wen-Tso; Mackie, Roderick I; Hernandez, Alvaro G; Wright, Chris L; Mikel, Mark A; Walker, Jared L; Sivaguru, Mayandi; Fried, Glenn; Yannarell, Anthony C; Fouke, Bruce W

    2014-06-01

    A low-diversity microbial community, dominated by the γ-proteobacterium Halomonas sulfidaeris, was detected in samples of warm saline formation porewater collected from the Cambrian Mt. Simon Sandstone in the Illinois Basin of the North American Midcontinent (1.8 km/5872 ft burial depth, 50°C, pH 8, 181 bars pressure). These highly porous and permeable quartz arenite sandstones are directly analogous to reservoirs around the world targeted for large-scale hydrocarbon extraction, as well as subsurface gas and carbon storage. A new downhole low-contamination subsurface sampling probe was used to collect in situ formation water samples for microbial environmental metagenomic analyses. Multiple lines of evidence suggest that this H. sulfidaeris-dominated subsurface microbial community is indigenous and not derived from drilling mud microbial contamination. Data to support this includes V1-V3 pyrosequencing of formation water and drilling mud, as well as comparison with previously published microbial analyses of drilling muds in other sites. Metabolic pathway reconstruction, constrained by the geology, geochemistry and present-day environmental conditions of the Mt. Simon Sandstone, implies that H. sulfidaeris-dominated subsurface microbial community may utilize iron and nitrogen metabolisms and extensively recycle indigenous nutrients and substrates. The presence of aromatic compound metabolic pathways suggests this microbial community can readily adapt to and survive subsurface hydrocarbon migration. © 2013 Society for Applied Microbiology and John Wiley & Sons Ltd.

  17. Microstructures in the Cretaceous Bima Sandstone, Upper Benue Trough, N.E. Nigeria: Implication for hydrocarbon migration

    Science.gov (United States)

    Samaila, N. K.; Dike, E. F. C.; Obaje, N. G.

    2008-01-01

    Faulting related to movements along major fault zones in the Upper Benue Trough during Albian times, with evidence of deformation in the Cretaceous Bima Sandstone are common especially around the Kaltungo, Gombe, Zambuk and Teli lineaments. Conjugate extensional systems of deformation bands show increased siliceous cementation of the sandstones adjacent to these lineaments. During the Late Cretaceous compressional event, the deformation bands and faults in the Upper Benue Trough were reactivated, resulting into dilational opening of fractures believed to have acted as fluid conduits and/or barriers. These deformation bands which decrease in density away from the major faults are characterized with increasing porosity and permeability in the host sandstone abruptly away from the tectonic barrier. It is proposed here that the master faults of the Benue Trough, linking it with the Anambra Basin and the Niger Delta probably served as conduits for the migration of hydrocarbons into the Cretaceous reservoirs of the Upper Benue Trough and by extension into the Niger Delta.

  18. Lithology, hydraulic properties, and water quality of the Sandstone Aquifer in the northwestern part of the Bad River Indian Reservation, Wisconsin, 1998-1999

    Science.gov (United States)

    Dunning, Charles P.

    2005-01-01

    The Precambrian sandstone aquifer in the northwestern part of the Bad River Band of Lake Superior Tribe of Chippewa Indians Reservation, Ashland County, Wisconsin, provides much of the drinking water to area residents. A study was undertaken in cooperation with the Bad River Tribe to provide specific information about the lithology, hydraulic properties, and water quality of the sandstone aquifer. During 1998 and 1999, the U.S. Geological Survey installed three monitoring wells, collected and analyzed lithologic and water samples, and conducted geophysical logging and aquifer tests to characterize the sandstone aquifer. The two monitoring wells in the southeastern part of the study area, the Diaperville Monitoring Well #1 (Diaperville MW #1) and the Tolman Monitoring Well #1 (Tolman MW #1) , are believed to have encountered older Middle Proterozoic Oronto Group sandstones. The sandstone encountered in the Ackley Monitoring Well #1 (Ackley MW #1) is believed to be Chequamegon Sandstone of the Late Proterozoic Bayfield Group. This interpretation is based on previous studies, as well as thin- section analysis of sandstone core recovered from the Ackley Monitoring Well #1. Results of aquifer tests conducted in the Diaperville Monitoring Well #1 and the Tolman Monitoring Well #1 provide ranges for hydraulic param - eter values in the sandstone aquifer: transmissivity ranges from 83 to 509 square feet per day; hydraulic conductivity ranges from 1.6 to 4.5 feet per day; storativity ranges from 0.00019 to 0.00046; and specific capacity ranges from 0.22 to 0.67 gallons per minute per foot. Though high- and low-angle fractures are present in Ackley Monitoring Well #1 core, the hydraulic properties of the bedrock appear to be due largely to the matrix porosity measured in thin section (16–21 percent) and permeability of the sandstone. The aquifer test for the Diaperville Monitoring Well #1 resulted in observed drawdown in nearby glacial wells, evidence of a hydraulic

  19. Facies and architecture of deep-water Sandstone lobes: Comparison of a shale-rich and a sand-rich system

    Energy Technology Data Exchange (ETDEWEB)

    Schuppers, J.D. (Delft Univ. of Technology (Netherlands))

    1993-09-01

    Two different foreland-basin deep-water sandstone systems have been studied for reservoir characterization purposes: the Broto lobes of the Eocene Hecho group, spain, and two sand bodies of the Oligocene-Miocene Arakintos Sandstone, Greece. The shale-rich Broto lobes are characterized by distinct vertical developments in terms of facies and expression of heterogeneity. Bed-thickness trends, lateral extent of sand beds, and facies variability are related to overall sand/shale ratio. A feature common to most of the sandstone packages is the occurrence of a basal slump and/or pebbly mudstone. The dominant sediment source is considered fluvial. Variation in sand quality within and between lobes is high. Deposition is considered to be strongly controlled by tectonics. The sand-rich Arakintos Sandstone consists of massive and pebbly sandstones, forming thick, sandy sheets alternating with relatively coarse-grained, thin-bedded turbidites. Facies, geometries, vertical organization, and the relation between grain size and bed thickness indicate a constrained development of the lobes, partly influenced by preexisting topography. A coastal sediment source is inferred. Little variation exists in sand quality within and between the lobes. The overall regularity in terms of facies, and the absence of slumps, suggest that fluctuations in relative sea level may have formed a major control on deposition. The two lobe systems illustrate the effect of tectonics, sediment type, topographic confinement, and possible sea level on facies and sand body architecture of deep-water sandstone lobes.

  20. Mineral Sequestration of CO2 mixed with H2S and SO2 in Sandstone-Shale Formation

    Science.gov (United States)

    Xu, T.; Pruess, K.; Apps, J. A.; Yamamoto, H.

    2004-12-01

    Carbon dioxide (CO2) injection into deep geologic formations can potentially reduce atmospheric emissions of greenhouse gases. Sequestering less-pure CO2 waste streams (containing of H2S and/or SO2) is less expensive or requires less energy than separating CO2 from flue gas or a coal gasification process. The long-term interaction of these injected acid gases with shale-confining layers of sandstone formations has not been well investigated. We therefore have developed a conceptual model of injection of CO2 with H2S and/or SO2 into a sandstone-shale sequence, using hydrogeologic properties and mineral compositions commonly encountered in Gulf Coast sediments. We have performed numerical simulations using a 1-D radial well region considering sandstone alone and a 2-D model using a sandstone-shale sequence under acid-gas injection conditions. Results indicate that shale plays a limited role in mineral alteration and sequestration of gases within a sandstone horizon for a short time period (10,000 years in present simulations). Unlike H2S, the co-injection of SO2 results in different pH distribution, mineral alteration patterns, and CO2 mineral sequestration. Simulations generate a zonal distribution of mineral alteration and formation of CO2 and SO2 trapping minerals that depends the pH distribution. Co-injection of SO2 results in a larger and stronger acidic zone close to the well. Precipitation of CO2 trapping minerals occurs in the higher pH ranges beyond the acidic zones. In contrast, SO2 trapping minerals are stable at low pH ranges (below 5) in the front of the acidic zone. Corrosion and well abandonment caused by co-injection of SO2 is a very significant issue. Significant CO2 is sequestered in ankerite and dawsonite, and some in siderite. CO2 mineral-trapping capability can reach 76 kg per cubic meter of medium. Most of SO2 is trapped by alunite precipitation, while some of the SO2 is trapped by anhydrite and pyrite precipitation. Addition of the acid gases

  1. Characterization of the Oriskany and Berea Sandstones: Evaluating Biogeochemical Reactions of Potential Sandstone–Hydraulic Fracturing Fluid Interaction

    Energy Technology Data Exchange (ETDEWEB)

    Verba, Circe [National Energy Technology Lab. (NETL), Albany, OR (United States); Harris, Aubrey [National Energy Technology Lab. (NETL), Albany, OR (United States)

    2016-07-07

    The Marcellus shale, located in the mid-Atlantic Appalachian Basin, has been identified as a source for natural gas and targeted for hydraulic fracturing recovery methods. Hydraulic fracturing is a technique used by the oil and gas industry to access petroleum reserves in geologic formations that cannot be accessed with conventional drilling techniques (Capo et al., 2014). This unconventional technique fractures rock formations that have low permeability by pumping pressurized hydraulic fracturing fluids into the subsurface. Although the major components of hydraulic fracturing fluid are water and sand, chemicals, such as recalcitrant biocides and polyacrylamide, are also used (Frac Focus, 2015). There is domestic concern that the chemicals could reach groundwater or surface water during transport, storage, or the fracturing process (Chapman et al., 2012). In the event of a surface spill, understanding the natural attenuation of the chemicals in hydraulic fracturing fluid, as well as the physical and chemical properties of the aquifers surrounding the spill site, will help mitigate potential dangers to drinking water. However, reports on the degradation pathways of these chemicals are limited in existing literature. The Appalachian Basin Marcellus shale and its surrounding sandstones host diverse mineralogical suites. During the hydraulic fracturing process, the hydraulic fracturing fluids come into contact with variable mineral compositions. The reactions between the fracturing fluid chemicals and the minerals are very diverse. This report: 1) describes common minerals (e.g. quartz, clay, pyrite, and carbonates) present in the Marcellus shale, as well as the Oriskany and Berea sandstones, which are located stratigraphically below and above the Marcellus shale; 2) summarizes the existing literature of the degradation pathways for common hydraulic fracturing fluid chemicals [polyacrylamide, ethylene glycol, poly(diallyldimethylammonium chloride), glutaraldehyde

  2. Hydrogeology of the Pictured Cliffs Sandstone in the San Juan structural basin, New Mexico, Colorado, Arizona, and Utah

    Science.gov (United States)

    Dam, William L.; Kernodle, J.M.; Thorn, C.R.; Levings, G.W.; Craigg, S.D.

    1990-01-01

    This report is one in a series resulting from the U.S. Geological Survey's Regional Aquifer System Analysis (RASA) study of the San Juan structural basin that began in October 1984. The purposes of the study (Welder, 1986) are to: (1) Define and evaluate the aquifer system; (2) assess the effects of past, present, and potential ground-water use on aquifers and streams, and (3) determine the availability and quality of ground water. Previous reports in this series describe the hydrogeology of the Dakota Sandstone (Craigg and others, 1989), Gallup Sandstone (Kernodle and others, 1989), Morrison Formation (Dam and others, 1990), Point Lookout Sandstone (Craigg and others, 1990), Kirtland Shale and Fruitland Formation (Kernodle and others, 1990), Menefee Formation (Levings and others, 1990), Cliff House Sandstone (Thorn and others, 1990), and Ojo Alamo Sandstone (Thorn and others, 1990) in the San Juan structural basin. This report summarizes information on the geology and the occurrence and quality of water in the Pictured Cliffs Sandstone, one of the primary water-bearing units in the regional aquifer system. Data used in this report were collected during the RASA study or derived from existing records in the U.S. Geological Survey's computerized National Water Information System (NWIS) data base, the Petroleum Information Corporation's data base, and the Dwight's ENERGYDATA Inc. BRIN database. Although all data available for the Pictured Cliffs Sandstone were considered in formulating the discussions in the text, not all those data could be plotted on the illustrations. The San Juan structural basin in New Mexico, Colorado, Arizona, and Utah has an area of about 21,600 square miles (fig. 1). The structural basin is about 140 miles wide and about 200 miles long. The study area is that part of the structural basin that contains rocks of Triassic and younger age; therefore, the study area is less extensive than the structural basin. Triassic through Tertiary

  3. Project 2010 Project Management

    CERN Document Server

    Happy, Robert

    2010-01-01

    The ideal on-the-job reference guide for project managers who use Microsoft Project 2010. This must-have guide to using Microsoft Project 2010 is written from a real project manager's perspective and is packed with information you can use on the job. The book explores using Project 2010 during phases of project management, reveals best practices, and walks you through project flow from planning through tracking to closure. This valuable book follows the processes defined in the PMBOK Guide, Fourth Edition , and also provides exam prep for Microsoft's MCTS: Project 2010 certification.: Explains

  4. Study on fine geological modelling of the fluvial sandstone reservoir in Daqing oilfield

    Energy Technology Data Exchange (ETDEWEB)

    Zhoa Han-Qing [Daqing Research Institute, Helongjiang (China)

    1997-08-01

    These paper aims at developing a method for fine reservoir description in maturing oilfields by using close spaced well logging data. The main productive reservoirs in Daqing oilfield is a set of large fluvial-deltaic deposits in the Songliao Lake Basin, characterized by multi-layers and serious heterogeneities. Various fluvial channel sandstone reservoirs cover a fairly important proportion of reserves. After a long period of water flooding, most of them have turned into high water cut layers, but there are considerable residual reserves within them, which are difficult to find and tap. Making fine reservoir description and developing sound a geological model is essential for tapping residual oil and enhancing oil recovery. The principal reason for relative lower precision of predicting model developed by using geostatistics is incomplete recognition of complex distribution of fluvial reservoirs and their internal architecture`s. Tasking advantage of limited outcrop data from other regions (suppose no outcrop data available in oilfield) can only provide the knowledge of subtle changing of reservoir parameters and internal architecture. For the specific geometry distribution and internal architecture of subsurface reservoirs (such as in produced regions) can be gained only from continuous infilling logging well data available from studied areas. For developing a geological model, we think the first important thing is to characterize sandbodies geometries and their general architecture`s, which are the framework of models, and then the slight changing of interwell parameters and internal architecture`s, which are the contents and cells of the model. An excellent model should possess both of them, but the geometry is the key to model, because it controls the contents and cells distribution within a model.

  5. Studies of electrical properties of low-resistivity sandstones based on digital rock technology

    Science.gov (United States)

    Yan, Weichao; Sun, Jianmeng; Zhang, Jinyan; Yuan, Weiguo; Zhang, Li; Cui, Likai; Dong, Huaimin

    2018-02-01

    Electrical properties are important parameters to quantitatively calculate water saturation in oil and gas reservoirs by well logging interpretation. It is usual that oil layers show high resistivity responses, while water layers show low-resistivity responses. However, there are low-resistivity oil zones that exist in many oilfields around the world, leading to difficulties for reservoir evaluation. In our research, we used digital rock technology to study different internal and external factors to account for low rock resistivity responses in oil layers. We first constructed three-dimensional digital rock models with five components based on micro-computed tomography technology and x-ray diffraction experimental results, and then oil and water distributions in pores were determined by the pore morphology method. When the resistivity of each component was assigned, rock resistivities were calculated by using the finite element method. We collected 20 sandstone samples to prove the effectiveness of our numerical simulation methods. Based on the control variate method, we studied the effects of different factors on the resistivity indexes and rock resistivities. After sensitivity analyses, we found the main factors which caused low rock resistivities in oil layers. For unfractured rocks, influential factors arranged in descending order of importance were porosity, clay content, temperature, water salinity, heavy mineral, clay type and wettability. In addition, we found that the resistivity index could not provide enough information to identify a low-resistivity oil zone by using laboratory rock–electric experimental results. These results can not only expand our understandings of the electrical properties of low-resistivity rocks from oil layers, but also help identify low-resistivity oil zones better.

  6. Ornamental sandstones used in Ciudad Rodrigo y Salamanca: petrographic and chemical characterization of the quarry materials

    Directory of Open Access Journals (Sweden)

    Varas, M. J.

    2002-06-01

    Full Text Available Petrographic and chemical study of the Ciudad Rodrigo (province of Salamanca, Spain sandstones reveals the existence of several types of stone (Red, Brown, Striped, Nodular and White. To some extent all of them have been used in the construction of the historical part of this city. The proximity of the quarries to the city has meant that they have been used for such purposes since remote times. The types of stone display important chemical and mineralogical variations as a result of the many diagenetic processes they have been subjected to over time. These alterations are reflected in the different varieties, whose splendor can be fully appreciated in the masonry of the historical buildings comprising the architectural ensemble of the city.

    El estudio petrográfico y químico de las llamadas “Areniscas de Ciudad Rodrigo" permite definir una serie de variedades pétreas (Roja, Marrón, Rayada, Nodular y Blanca que, en mayor o menor medida, han sido utilizadas en la construcción del casco histórico de esta ciudad. Su proximidad a la ciudad hizo que la extracción se viera favorecida desde tiempos remotos. Presentan variaciones químicas y mineralógicas importantes como consecuencia de los múltiples procesos diagenéticos acontecidos a lo largo de toda su historia geológica. Estas modificaciones se traducen en diversas variedades pétreas cuya gran vistosidad queda reflejada en la sillería de los edificios históricos, haciendo de Ciudad Rodrigo un Conjunto Arquitectónico muy pintoresco.

  7. Visualization of foam/oil in a new, high resolution, sandstone replica micromodel

    Energy Technology Data Exchange (ETDEWEB)

    Hornbrook, J.W.; Pettit, P.; Castanier, L.M.

    1992-08-01

    A new micromodel construction procedure has been developed as a tool to better understand and model pore level events in porous media. The construction procedure allows for the almost exact two-dimensional replication of any porous medium of interest. For the case presented here a berea sandstone was chosen. Starting with a thin section of the porous medium of interest, a two-dimensional replica of the flow path is etched into a silicon wafer to a prescribed depth. Bonding the etched pattern to a flat glass plate isolates the flow path and allows the pore level flow events to be studied. The high resolution micromodels constructed with the new procedure were used to study the effects of oil on the displacement characteristics of foam in a porous medium of intermediate wettability. A crude oil was injected into the micromodel, partially filling it. The oil was then produced under two different displacement schemes. First, a slug of surfactant was used. Second, foam generated in situ, far from the oil bank, was used to displace the oil. Qualitative observations indicate significant differences at the interface between the oil and the displacing phase. When slug surfactant injection is used, the oil appears to wet the surface. The oil displacement process is efficient due to a large fractional production of oil from the large pores before the surfactant breaks through. When in-situ foam is the displacing phase, the foam is observed to break near the oil interface. The liquid phase in the foam becomes the wetting phase. It is observed to reside in the small pores and to coat most of the grain surfaces. Displacement of oil under this injection scheme is inefficient due to transfer of the surfactant along grain edges and subsequent early breakthrough of the surfactant.

  8. Non-Invasive Magnetic Resonance Imaging of Nanoparticle Migration and Water Velocity Inside Sandstone

    Science.gov (United States)

    Phoenix, V. R.; Shukla, M.; Vallatos, A.; Riley, M. S.; Tellam, J. H.; Holmes, W. M.

    2015-12-01

    Manufactured nanoparticles (NPs) are already utilized in a diverse array of applications, including cosmetics, optics, medical technology, textiles and catalysts. Problematically, once in the natural environment, NPs can have a wide range of toxic effects. To protect groundwater from detrimental NPs we must be able to predict nanoparticle movement within the aquifer. The often complex transport behavior of nanoparticles ensures the development of NP transport models is not a simple task. To enhance our understanding of NP transport processes, we utilize novel magnetic resonance imaging (MRI) which enables us to look inside the rock and image the movement of nanoparticles within. For this, we use nanoparticles that are paramagnetic, making them visible to the MRI and enabling us to collect spatially resolved data from which we can develop more robust transport models. In this work, a core of Bentheimer sandstone (3 x 7 cm) was saturated with water and imaged inside a 7Tesla Bruker Biospec MRI. Firstly the porosity of the core was mapped using a MSME MRI sequence. Prior to imaging NP transport, the velocity of water (in absence on nanoparticles) was mapped using an APGSTE-RARE sequence. Nano-magnetite nanoparticles were then pumped into the core and their transport through the core was imaged using a RARE sequence. These images were calibrated using T2 parameter maps to provide fully quantitative maps of nanoparticle concentration at regular time intervals throughout the column (T2 being the spin-spin relaxation time of 1H nuclei). This work demonstrated we are able to spatially resolve porosity, water velocity and nanoparticle movement, inside rock, using a single technique (MRI). Significantly, this provides us with a unique and powerful dataset from which we are now developing new models of nanoparticle transport.

  9. Three-dimensional phase-field investigation of pore space cementation and permeability in quartz sandstone

    Science.gov (United States)

    Prajapati, N.; Ankit, K.; Selzer, M.; Nestler, B.; Schmidt, C.; Hilgers, C.

    2016-12-01

    Prediction of cement volumes is an integral part of reservoir modeling. Quantitative determination of petrophysical charateristics such as permeability and water saturation are essential in order to assess the sufficiency of hydrocarbons in pore space. Conventional techniques such as well-logging provide only a qualitative understanding of the cementation history and future pore evolution. Diffused modeling approach such as the phase-field method is a viable alternative that can be used to numerically simulate pore cementation under different boundary conditions in a thermodynamically-consistent manner. Here, we use a multiphase-field model to investigate the dynamics of polycrystalline quartz precipitation from supersaturated solution in porous rock. To begin with, we validate the faceted-type anisotropy formulations of the interfacial energy function that corresponds to monocrystalline quartz using the volume-preservation technique. Next, we numerically simulate the unitaxial evolution of quartz in a 2D open space and investigate the role of misorientations and c/a ratios in the formation of quartz cement that is extensively observed in nature. Based on this sensitivity analysis, we choose a realistic c/a ratio to computationally mimic the anisotropic sealing of pore space in sandstone. We observe a large deviation of 3D sealing kinetics as compared to 2D. The decrease in 3D pore space volume during cementation is found to be inversely dependent (non-linear) on the inter-nuclei distance. Using CFD analysis, we then derive the temporal evolution of permeability in partially sealed microstructures. Finally, we highlight the capabilities of the present numerical approaches in numerically simulating 3D reactive flow during progressive sealing in porous rocks based on innovative post-processing analyses and visualization techniques.

  10. A pterodactyloid pterosaur from the Upper Cretaceous Lapurr sandstone, West Turkana, Kenya

    Directory of Open Access Journals (Sweden)

    Patrick M. O'Connor

    2011-03-01

    Full Text Available An isolated pterosaurian caudal cervical (~ postcervical vertebra was recovered from the Upper Cretaceous Lapurr sandstone ofWest Turkana, northwestern Kenya. The vertebral centrum is short, wide, and dorsoventrally compressed. Although the specimen is lightly built similar to most pterosaurs, it is here referred to Pterodactyloidea and tentatively to the Azhdarchidae in that it lacks pneumatic features on both the centrum and neural arch. This represents one of the few pterosaurs recovered from the entirety of Afro-Arabia, the first pterosaur recovered from the Cretaceous of East Africa, and, significantly, a specimen that was recovered from fluvial deposits rather than the near-shore marine setting typical of most pterosaur discoveries.Uma vértebra cervical caudal isolada de pterossauro (~ pós-cervical foi recuperada do Cretáceo Superior do arenito de Lapurr do Oeste de Turkana, noroeste do Quênia. O centro vertebral é curto, largo e comprimido dorsoventralmente. Embora o espécime seja leve como grande parte dos pterossauros, ele é aqui referido a Pterodactyloidea e tentativamente a Azhdarchidae no que diz respeito à ausência de características pneumáticas tanto no centro quanto no arco neural. Este representa um dos poucos pterossauros recuperados do conjunto Afro-Arábia, o primeiro pterossauro proveniente do Cretáceo do Leste da África e, significativamente, um espécime que foi recuperado de depósitos fluviais e não do cenário marinho próximo da costa típico da maioria das descobertas de pterossauros.

  11. Vertical cross contamination of trichloroethylene in a borehole in fractured sandstone

    Science.gov (United States)

    Sterling, S.N.; Parker, B.L.; Cherry, J.A.; Williams, J.H.; Lane, J.W.; Haeni, F.P.

    2005-01-01

    Boreholes drilled through contaminated zones in fractured rock create the potential for vertical movement of contaminated ground water between fractures. The usual assumption is that purging eliminates cross contamination; however, the results of a field study conducted in a trichloroethylene (TCE) plume in fractured sandstone with a mean matrix porosity of 13% demonstrates that matrix-diffusion effects can be strong and persistent. A deep borehole was drilled to 110 m below ground surface (mbgs) near a shallow bedrock well containing high TCE concentrations. The borehole was cored continuously to collect closely spaced samples of rock for analysis of TCE concentrations. Geophysical logging and flowmetering were conducted in the open borehole, and a removable multilevel monitoring system was installed to provide hydraulic-head and ground water samples from discrete fracture zones. The borehole was later reamed to complete a well screened from 89 to 100 mbgs; persistent TCE concentrations at this depth ranged from 2100 to 33,000 ??g/L. Rock-core analyses, combined with the other types of borehole information, show that nearly all of this deep contamination was due to the lingering effects of the downward flow of dissolved TCE from shallower depths during the few days of open-hole conditions that existed prior to installation of the multilevel system. This study demonstrates that transfer of contaminant mass to the matrix by diffusion can cause severe cross contamination effects in sedimentary rocks, but these effects generally are not identified from information normally obtained in fractured-rock investigations, resulting in potential misinterpretation of site conditions. Copyright ?? 2005 National Ground Water Association.

  12. Microbial biofilms on the sandstone monuments of the Angkor Wat Complex, Cambodia.

    Science.gov (United States)

    Gaylarde, Christine C; Rodríguez, César Hernández; Navarro-Noya, Yendi E; Ortega-Morales, B Otto

    2012-02-01

    Discoloring biofilms from Cambodian temples Angkor Wat, Preah Khan, and the Bayon and West Prasat in Angkor Thom contained a microbial community dominated by coccoid cyanobacteria. Molecular analysis identified Chroococcidiopsis as major colonizer, but low similarity values (<95%) suggested a similar genus or species not present in the databases. In only two of the six sites sampled were filamentous cyanobacteria, Microcoleus, Leptolyngbya, and Scytonema, found; the first two detected by sequencing of 16S rRNA gene library clones from samples of a moist green biofilm on internal walls in Preah Khan, where Lyngbya (possibly synonymous with Microcoleus) was seen by direct microscopy as major colonizer. Scytonema was detected also by microscopy on an internal wall in the Bayon. This suggests that filamentous cyanobacteria are more prevalent in internal (high moisture) areas. Heterotrophic bacteria were found in all samples. DNA sequencing of bands from DGGE gels identified Proteobacteria (Stenotrophomonas maltophilia and Methylobacterium radiotolerans) and Firmicutes (Bacillus sp., Bacillus niacini, Bacillus sporothermodurans, Lysinibacillus fusiformis, Paenibacillus sp., Paenibacillus panacisoli, and Paenibacillus zanthoxyli). Some of these bacteria produce organic acids, potentially degrading stone. Actinobacteria, mainly streptomycetes, were present in most samples; algae and fungi were rare. A dark-pigmented filamentous fungus was detected in internal and external Preah Khan samples, while the alga Trentepohlia was found only in samples taken from external, pink-stained stone at Preah Khan. Results show that these microbial biofilms are mature communities whose major constituents are resistant to dehydration and high levels of irradiation and can be involved in deterioration of sandstone. Such analyses are important prerequisites to the application of control strategies.

  13. Stratigraphy of the uppermost Old Red Sandstone of Svalbard (Mimerdalen Subgroup

    Directory of Open Access Journals (Sweden)

    Karsten Piepjohn

    2014-10-01

    Full Text Available Between the fjords Dicksonfjorden and Billefjorden in central Spitsbergen, Svalbard's youngest deposits (Early Givetian to Famennian in age of the Old Red Sandstone—the Mimerdalen Subgroup—are exposed. They form a narrow outcrop area parallel to the Billefjorden Fault Zone and overlie unconformably the multicoloured sandstones of the Lower Devonian Wood Bay Formation. Stratigraphic rank and subdivision of the succession were changed repeatedly since its first mention in 1910. Based on student work in 1996, as well as regional mapping by the authors in 1993 and 2003, the present work formalizes the stratigraphic framework of the succession. This framework has already been applied in recent geological maps. At the same time it is a continuation of the lithostratigraphic standardization carried out by the Committee on the Stratigraphy of Svalbard (1999, where only post-Devonian rocks were considered. Except for some small-pebble conglomerate layers in the Wood Bay Formation, the upper part of the Mimerdalen Subgroup contains the first coarse-grained deposits in Svalbard's Old Red since the lowermost Devonian Red Bay Group. Faulting between its formations as well as conglomerate pebbles derived from the Lower Devonian Wood Bay Formation indicate the onset of the Svalbardian Event after the tectonic stability during the deposition of the Wood Bay Formation. The Mimerdalen Subgroup is probably the detrital fill of a small foreland basin derived from erosion during the uplift of the Ny-Friesland Block to the east of the Billefjorden Fault Zone. It was later affected by compressional tectonic movements during the Svalbardian Event.

  14. Determination of water-lock critical value of low-permeability sandstones based on digital core

    Directory of Open Access Journals (Sweden)

    Honglin Zhu

    2016-05-01

    Full Text Available Research and development of water lock inhibiting measures is very crucial in verifying the link mechanism between the internal factors of water lock and its extent of damage. Based on conventional water-lock physics experiments, however, only the consequence of macro water lock damage can be investigated, while the microscopic mechanism cannot be studied. In this paper, 3D digital cores of low-permeability sandstones were prepared by means of high-resolution micro-CT scan, and their equivalent pore network model was built as well. Virtual “imbibition” experiments controlled by capillary force were carried out by using pore-scale flow simulation. Then the link mechanism between the microscopic internal factors (e.g. wettability, water saturation and pore–throat structure parameters and the water-lock damage degree was discussed. It is shown that the damage degree of water lock reduces gradually as the wettability transits from water wet to gas wet. Therefore, the water lock damage can be reduced effectively and gas-well productivity can be improved so long as the capillary environment is changed from strong water wettability to weak gas wettability. The more different the initial water saturation is from the irreducible water saturation, the more serious the water lock damage is. The damage degree of water lock is in a negative correlation with the coordinate number, but a positive correlation with the pore–throat ratio. Based on the existing research results, water lock tends to form in the formations composed of medium-sized throats. It is concluded that there is a critical throat radius, at which the water lock is the most serious.

  15. Bed-parallel compaction bands in aeolian sandstone: Their identification, characterization and implications

    Science.gov (United States)

    Aydin, Atilla; Ahmadov, Ramil

    2009-12-01

    This study combines field observations and laboratory analyses to identify and characterize predominantly bed-parallel compaction bands in the aeolian Aztec Sandstone exposed in the Valley of Fire State Park, Nevada. These bed-parallel compaction bands display morphological and geometrical characteristics of deformation bands of various modes previously described in the literature, such as positive relief, echelon geometry, "bridge" and "eye" structure, and zonal occurrence. Portions of some bands cross-cut sedimentary layers, thereby distinguishing themselves from depositional bedding. Laboratory image analyses of several samples collected from bed-parallel bands, using a computational rock physics algorithm, show that their porosities are less than half that of the host rock and their permeability is nearly one order of magnitude less. In addition, the study area includes compaction bands that have dip angles ranging from sub-horizontal to greater than 20°. Parts of these bands have even higher dip angles and show evidence for increasing intragranular fracturing and shearing as the band inclination increases. We attribute this variation to shear-enhanced compaction, a mechanism proposed earlier by experimental rock mechanists. One of the implications of the occurrence of localized compaction in the form of discrete bands parallel to flat-lying and low-angle bedding is that it provides an alternative or an additional mode to a vertically continuous compaction in loose or poorly cemented sediments. If pervasive, bed-parallel compaction bands with significantly lower porosity than that of the surrounding undeformed rock should result in a significant heterogeneity and vertical anisotropy in seismic velocities and hydraulic properties of granular rocks.

  16. Characterizing gas shaly sandstone reservoirs using the magnetic resonance technology in the Anaco area, East Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Fam, Maged; August, Howard [Halliburton, Houston, TX (United States); Zambrano, Carlos; Rivero, Fidel [PDVSA Gas (Venezuela)

    2008-07-01

    With demand for natural gas on the rise every day, accounting for and booking every cubic foot of gas is becoming very important to operators exploiting natural gas reservoirs. The initial estimates of gas reserves are usually established through the use of petrophysical parameters normally based on wireline and/or LWD logs. Conventional logs, such as gamma ray, density, neutron, resistivity and sonic, are traditionally used to calculate these parameters. Sometimes, however, the use of such conventional logs may not be enough to provide a high degree of accuracy in determining these petrophysical parameters, which are critical to reserve estimates. Insufficient accuracy can be due to high complexities in the rock properties and/or a formation fluid distribution within the reservoir layers that is very difficult to characterize with conventional logs alone. The high degree of heterogeneity in the shaly sandstone rock properties of the Anaco area, East Venezuela, can be characterized by clean, high porosity, high permeability sands to very shaly, highly laminated, and low porosity rock. This wide variation in the reservoir properties may pose difficulties in identifying gas bearing zones which may affect the final gas reserves estimates in the area. The application of the magnetic resonance imaging (MRI) logging technology in the area, combined with the application of its latest acquisition and interpretation methods, has proven to be very adequate in detecting and quantifying gas zones as well as providing more realistic petrophysical parameters for better reserve estimates. This article demonstrates the effectiveness of applying the MRI logging technology to obtain improved petrophysical parameters that will help better characterize the shaly-sands of Anaco area gas reservoirs. This article also demonstrates the value of MRI in determining fluid types, including distinguishing between bound water and free water, as well as differentiating between gas and liquid

  17. Application of Polyelectrolyte Complex Nanoparticles in Increasing the Lifetime of Poly(Vinyl Sulfonate) Scale Inhibitor in Berea Sandstone Rock

    Science.gov (United States)

    Veisi, Masoumeh

    Water flooding is used extensively in oil fields to maintain reservoir pressure and displace oil. However, seawater containing high concentrations of sulfate ion may form scale precipitate when mixed with incompatible formation water containing barium and strontium ions. Formation of scales such as barium sulfate can pose costly operational problems by plugging the injection and production wells. Polymers such as poly(vinyl sulfonate) (PVS) are well-known scale inhibitors which can effectively prevent the formation of barium sulfate. Squeeze treatment is a common method which can be used to inject the PVS in the reservoir. In this process, PVS solution is injected into production wells and the inhibitor is adsorbed on reservoir rocks and released during subsequent production of reservoir fluids. Once inhibitor concentration decreases to its minimum effective concentration (MEC), the process needs to be repeated. However, the low adsorption of PVS onto the rock results in a very short squeeze lifetime rendering the treatment uneconomical. In this research, the application of polyelectrolyte complexes (PECs) to increase the squeeze treatment lifetime of PVS was examined. The objective of the project was to develop PEC nanoparticles (NPs) which would improve the PVS adsorption on the rock through charge alteration. The PECs entrapped the PVS in their structure and released the polymer gradually when pH or ionic strength of the surrounding brine increased. PVS adsorption followed by a slow release of the polymer can maintain the scale inhibitor concentration above MEC for longer, and therefore extend the squeeze treatment lifetime. Positively charged nanoparticles consisting of poly(ethyleneimine) and poly(vinyl sulfonate) (PEI-PVS) were prepared and optimized to maximize PVS entrapment in the PEC structure. The stability of the nanoparticles at different temperatures and over time was confirmed. Their stability in the presence of mono and divalent cations was also

  18. Origin of a classic cratonic sheet sandstone: Stratigraphy across the Sauk II-Sauk III boundary in the Upper Mississippi Valley

    Science.gov (United States)

    Runkel, Anthony C.; McKay, R.M.; Palmer, A.R.

    1998-01-01

    The origin of cratonic sheet sandstones of Proterozoic and early Paleozoic age has been a long-standing problem for sedimentologists. Lower Paleozoic strata in the Upper Mississippi Valley are best known for several such sandstone bodies, the regional depositional histories of which are poorly understood. We have combined outcrop and subsurface data from six states to place the Upper Cambrian Wonewoc (Ironton and Galesville) Sandstone in a well-constrained stratigraphic framework across thousands of square kilometers. This framework makes it possible for the first time to construct a regional-scale depositional model that explains the origin of this and other cratonic sheet sandstones. The Wonewoc Sandstone, although mapped as a single contiguous sheet, is a stratigraphically complex unit that was deposited during three distinct conditions of relative sea level that span parts of four trilobite zones. During a relative highstand of sea level in Crepicephalus Zone time, quartzose sandstone lithofacies aggraded more or less vertically in nearshore-marine and terrestrial environments across much of the present-day out-crop belt around the Wisconsin arch. At the same time, finer grained, feldspathic sandstone, siltstone, and shale aggraded in deeper water immediately seaward of the quartzose sand, and shale and carbonate sediment accumulated in the most distal areas. During Aphelaspis and Dunderbergia Zones time a relative fall in sea level led to the dispersal of quartzose sand into a basinward-tapering, sheet-like body across much of the Upper Mississippi Valley. During early Elvinia Zone time a major transgression led to deposition of a second sheet sandstone that is generally similar to the underlying regressive sheet. The results of this investigation also demonstrate how subtle sequence-bounding unconformities may be recognized in mature, cratonic siliciclastics. We place the Sauk II-Sauk III subsequence boundary at the base of the coarsest bed in the Wonewoc

  19. Assessment of marine and urban-industrial environments influence on built heritage sandstone using X-ray fluorescence spectroscopy and complementary techniques

    Science.gov (United States)

    Morillas, Héctor; García-Galan, Javier; Maguregui, Maite; Marcaida, Iker; García-Florentino, Cristina; Carrero, Jose Antonio; Madariaga, Juan Manuel

    2016-09-01

    The sandstone used in the construction of the tower of La Galea Fortress (Getxo, north of Spain) shows a very bad conservation state and a high percentage of sandstone has been lost. The fortress is located just on a cliff and close to the sea, and it experiments the direct influence of marine aerosol and also the impact of acid gases (SOx and NOx) coming from the surrounding industry and maritime traffic. This environment seems to be very harmful for the preservation of the sandstone used in it, promoting different pathologies (disintegration, alveolization, cracking or erosion blistering, salts crystallization on the pores, efflorescences etc.). In this work, a multianalytical methodology based on a preliminary in-situ screening of the affected sandstone using a handheld energy dispersive X-ray fluorescence spectrometer (HH-ED-XRF) and a subsequent characterization of extracted sample in the laboratory using elemental (μ-ED-XRF, Scanning Electron Microscope coupled to an X-Max Energy-Dispersive (SEM-EDS) and Inductively coupled plasma mass spectrometry (ICP-MS)) and molecular techniques (micro-Raman spectroscopy (μ-RS) and X-ray Diffraction (XRD)) was applied in order to characterize the original composition of this kind of stone and related deterioration products. With the whole methodology, it was possible to assess that the sandstone contain a notable percentage of calcite. The sulfation and nitration of this carbonate detected in the stone led to the dissolution process of the sandstone, promoting the observed material loss. Additionally, the presence of salts related with the influence of marine aerosol confirms that this kind of environment have influence on the conservation state of the sandstone building.

  20. Material properties of Godula sandstones and forms and reasons of their deterioration in constructions in industrial environment of the Ostrava region

    Science.gov (United States)

    Vavro, Martin; Souček, Kamil; Martinec, Petr; Vavro, Leona; Handzelová, Barbora

    2015-04-01

    The Upper Cretaceous green glauconitic sandstones, referred to as Godula or Těšín sandstones according to their stratigraphic position or area of mining, represent a traditional building and decorative stone widely used since the turn of the 19th and 20th centuries in constructions in the industrial region of Ostrava and adjacent part of the Těšín Silesia. In terms of their physical and mechanical properties, the sandstones can be characterized by high values of bulk density, low absorption capacity and low total porosity, high abrasion resistance, high to very high values of strength properties and high fracture toughness. Due to their high compactness and strength, they can get relatively good polish, as one of few sandstones mined in the Czech Republic. However, in contrast to high quality of physical and mechanical properties of the Godula sandstones, degree of their durability in the case of exterior use is often very low. Already after 5 to 10 years of exposure to weather, moreover in combination with road salting, almost total surface decay of the stone can occur. In order to determine the reasons of usually very rapid degradation of the Godula sandstones in exterior conditions, time-dependent water saturation and evaporation, and size distribution and shape parameters of rock pore space were determined using the Hg-porosimetry and the X-Ray computed micro-tomography. It has been found that typical for the Godula sandstones is a closed pore space with domination of small pores (rehabilitation or reconstruction of constructions.

  1. Fourier transform infra-red (FTIR) spectroscopy investigation, dose effect, kinetics and adsorption capacity of phosphate from aqueous solution onto laterite and sandstone.

    Science.gov (United States)

    Coulibaly, Lassina Sandotin; Akpo, Sylvain Kouakou; Yvon, Jacques; Coulibaly, Lacina

    2016-12-01

    Environmental pollution by phosphate in developing countries is growing with extensive and diffuse pollution. Solving these problem with intensive technologies is very expensive. Using natural sorbent such as laterite and sandstone could be a solution. The main objective of the study is to evaluate the P-removal efficiency of these materials under various solution properties. Laterite and sandstone used mainly contain very high levels of finely grained iron and aluminum oxy-hydroxides and diverse dioctahedral clays. Phosphate adsorption tests were carried out using crushed laterite and sandstone. Optimal doses and pH effects on phosphate adsorption were studied with a potassium hydrogeno-phosphate solution of 5 mg/L at 30 °C. The main results were that the optimal dosage is 15 and 20 mg/L respectively for laterite and sandstone. The phosphate adsorptions efficiency of laterite and sandstone are pH-dependent, they increase when the pH grows up to the Point of Zero Charge (PZC) and slowly decrease beyond. The adsorption capacities of the materials also increase proportionally with the initial phosphate concentration. The pseudo-second-order successfully described the kinetics of the phosphate adsorption on the two adsorbents. With this model, the adsorption capacity values are obtained, which give an idea of the maximum phosphate uptake that the laterite and sandstone could achieve. The changes on the FTIR spectra of raw materials and phosphate adsorbed material confirm the mechanism of chemisorptions. Considering the above, laterite and sandstone could be used as efficient and cheap adsorbent for the removal of phosphate in aqueous solution. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Origin of karst conduits in calcareous sandstone and carbonate-silicate rocks: Complex role of insoluble material

    Science.gov (United States)

    Bruthans, Jiri; Balak, Frantisek; Schweigstillova, Jana; Vojtisek, Jan

    2017-04-01

    Carbonate karst is best developed in high-grade limestones and majority of the studies is focused on these rocks. Features developed by dissolution of calcite cement in quartz sandstones and dissolution of various carbonate-silicate rocks are studied far less frequently. Unlike in common karst, the insoluble residuum has to be washed out after dissolution to create high-permeability conduits in these rocks. Aquifers in a Bohemian Cretaceous Basin (BCB), the most important hydrogeological basin in the Czech Republic, consist mainly of quartz and calcareous sandstones to siltstones. These rocks are intercalated by thin layers of calcite-cemented sandstone and low-grade limestone, the latter sometimes partly impregnated by a secondary silica. Results of tracer tests show a high flow velocity in some of the aquifers. Springs with flow rate up to 500 l/s and wells with yield up to 200 l/s occur in these rocks. Dissolution features in BCB were however not yet studied in detail. For identification and characterization of rocks prone to karstification, 350 cores were sampled mostly from boreholes but also from rock outcrops in several areas of BCB. Cores were taken from intervals where: (i) high carbonate content was expected, (ii) conduits and enlarged porosity was observed in rock outcrops or wells, (iii) inflows to boreholes were determined by well logging. Calcium carbonate content was determined by calcimetry in all cores. All cores were leached in hydrochloric acid to observe the degree of disintegration after removal of calcite, which was far dominating portion of total carbonate. Polished sections were prepared from selected cores and Ca, Si, Na, K, Al content was automatically mapped by microprobe to visualize the calcium, silica, feldspar and clay mineral distribution in cores. Conduits were photo documented in the field. Two types of sediments with distinct disintegration characteristics were observed: (i) In sandstone composed of quartz grains cemented by

  3. Analysis of single oil-bearing fluid inclusions in mid-Proterozoic sandstones (Roper Group, Australia)

    Science.gov (United States)

    Siljeström, Sandra; Volk, Herbert; George, Simon C.; Lausmaa, Jukka; Sjövall, Peter; Dutkiewicz, Adriana; Hode, Tomas

    2013-12-01

    Hydrocarbons and organic biomarkers extracted from black shales and other carbonaceous sedimentary rocks are valuable sources of information on the biodiversity and environment of early Earth. However, many Precambrian hydrocarbons including biomarkers are suspected of being younger contamination. An alternative approach is to study biomarkers trapped in oil-bearing fluid inclusions by bulk crushing samples and subsequently analysing the extracted hydrocarbons with gas chromatography-mass spectrometry. However, this method does not constrain the hydrocarbons to one particular oil inclusion, which means that if several different generations of oil inclusions are present in the sample, a mix of the content from these oil inclusions will be analysed. In addition, samples with few and/or small inclusions are often below the detection limit. Recently, we showed that it is possible to detect organic biomarkers in single oil-bearing fluid inclusions using time-of-flight secondary ion mass spectrometry (ToF-SIMS). In the present study, single fluid inclusion analysis has been performed on Proterozoic samples for the first time. Four individual oil-bearing fluid inclusions, found in 1430 Ma sandstone from the Roper Superbasin in Northern Australia, were analysed with ToF-SIMS. The ToF-SIMS spectra of the oil in the different inclusions are very similar to each other and are consistent with the presence of n-alkanes/branched alkanes, monocyclic alkanes, bicyclic alkanes, aromatic hydrocarbons, and tetracyclic and pentacyclic hydrocarbons. These results are in agreement with those obtained from bulk crushing of inclusions trapped in the same samples. The capability to analyse the hydrocarbon and biomarker composition of single oil-bearing fluid inclusions is a major breakthrough, as it opens up a way of obtaining molecular compositional data on ancient oils without the ambiguity of the origin of these hydrocarbons. Additionally, this finding suggests that it will be possible

  4. Geochemical processes in a calcareous sandstone aquifer during managed aquifer recharge with desalinated seawater

    Science.gov (United States)

    Ganot, Yonatan; Russak, Amos; Siebner, Hagar; Bernstein, Anat; Katz, Yoram; Guttman, Jospeh; Kurtzman, Daniel

    2017-04-01

    In the last three years we monitor Managed Aquifer Recharge (MAR) of post-treated desalinated seawater (PTDES) in an infiltration pond, at the Menashe site that overlies the northern part of the Israeli Coastal Aquifer. The PTDES are stabilized with CaCO3 during post-treatment in the desalination plant and their chemical composition differs from those of any other water recharged to the aquifer and of the natural groundwater. We use suction cups in the unsaturated zone, shallow observation wells within the pond and production wells that encircles the MAR Menashe site, to study the geochemical processes during MAR with PTDES. Ion-enrichment (remineralization) of the recharged water was observed in both unsaturated zone and shallow observation wells samples. Enrichment occurs mainly in the first few meters below the pond surface by ion-exchange processes. Mg2+ enrichment is most prominent due to its deficiency in the PTDES. It is explained by ion-exchange with Ca2+, as the PTDES (enriched with Ca2+) infiltrates through a calcareous-sandstone aquifer with various amount of adsorbed Mg2+ (3-27 meq/kg). Hence, the higher concentration of Ca+2 in the PTDES together with its higher affinity to the sediments promotes the release of Mg2+ ions to the recharged water. Water isotopes analysis of the production wells were used to estimate residence time and mixing with local groundwater. At the end of 2016, it was found that the percentage of PTDES in adjacent down-gradient production wells was around 10%, while more distant or up-gradient wells show no mixing with PTDES. The distinct isotope contrast between the recharged desalinated seawater (δ2H=+11.2±0.2‰) and the local groundwater (δ2H ranged from -22.7 to -16.7‰) is a promising tool to evaluate future mixing processes at the Menshae MAR site. Using the Menashe MAR system for remineralization could be beneficial as a primary or complementary post-treatment technique. However, the sustainability of this process is

  5. Rock Physical Controls on Deformation of Weakly Consolidated Sandstone during Depletion

    Science.gov (United States)

    Hol, S.; van der Linden, A.

    2016-12-01

    Understanding the constitutive behavior of sedimentary rocks is vital for predicting long-term performance of subsurface oil and gas applications, in particular when these result in compaction and surface subsidence. Although it is well-known that granular media at reservoir conditions can undergo massive crushing at high stress, the micromechanical response of the rocks to the transition from the virgin to the depleted state is not well understood under the expected uniaxial strain boundary conditions. Here, we report a comparative characterization and deformation study using weakly consolidated, high-porosity (27.3-33.4%) sandstone from a gas field in the North Sea. The samples, extracted from various wells, contain 10%-40% phyllosilicates, 44%-75% quartz and 4%-12% feldspar, and display single-mode, log-normal particle size distributions with a mean grain size of 190-500 µm. Using novel rock testing techniques, we deform the samples under conditions expected during production, notably using the Uniaxial-strain Pore Pressure Depletion (UPPD) and K0 protocols. The evolution of ultrasonic P-wave velocity was actively monitored during all tests. The results show a decrease in radial stress with a horizontal depletion path constant of 0.67-0.89, and a uniaxial compressibility Cm of 6.5·10-5-2.9·10-3 MPa-1. Samples subjected to a combined UPPD-K0protocol show catastrophic failure (final failure) at mean stress levels between 23 MPa and 50 MPa. Using the ultrasonic P-wave data, precursory deformation associated with de-bonding, disaggregation, or breaking of grains can be observed in the range 19 MPa-35 MPa. A comparison of the failure stress with the granular properties and mineralogy of the samples suggests a negative correlation with porosity, but more importantly, confirms a relationship with phyllosilicate/feldspar content (negative) and quartz (positive). Initial failure, and potentially final failure, is expected to occur in samples with porosities over 30

  6. Optimal Complexity in Reservoir Modeling of an Eolian Sandstone for Carbon Sequestration Simulation

    Science.gov (United States)

    Li, S.; Zhang, Y.; Zhang, X.

    2011-12-01

    Geologic Carbon Sequestration (GCS) is a proposed means to reduce atmospheric concentrations of carbon dioxide (CO2). Given the type, abundance, and accessibility of geologic characterization data, different reservoir modeling techniques can be utilized to build a site model. However, petrophysical properties of a formation can be modeled with simplifying assumptions or with greater detail, the later requiring sophisticated modeling techniques supported by additional data. In GCS where cost of data collection needs to be minimized, will detailed (expensive) reservoir modeling efforts lead to much improved model predictive capability? Is there an optimal level of detail in the reservoir model sufficient for prediction purposes? In Wyoming, GCS into the Nugget Sandstone is proposed. This formation is a deep (>13,000 ft) saline aquifer deposited in eolian environments, exhibiting permeability heterogeneity at multiple scales. Based on a set of characterization data, this study utilizes multiple, increasingly complex reservoir modeling techniques to create a suite of reservoir models including a multiscale, non-stationary heterogeneous model conditioned to a soft depositional model (i.e., training image), a geostatistical (stationary) facies model without conditioning, a geostatistical (stationary) petrophysical model ignoring facies, and finally, a homogeneous model ignoring all aspects of sub-aquifer heterogeneity. All models are built at regional scale with a high-resolution grid (245,133,140 cells) from which a set of local simulation models (448,000 grid cells) are extracted. These are considered alternative conceptual models with which pilot-scale CO2 injection is simulated (50 year duration at 1/10 Mt per year). A computationally efficient sensitivity analysis (SA) is conducted for all models based on a Plackett-Burman Design of Experiment metric. The SA systematically varies key parameters of the models (e.g., variogram structure and principal axes of intrinsic

  7. Current results of an arachnological survey of some sandstone rock sites in Bohemia (so-called "rock cities"

    Directory of Open Access Journals (Sweden)

    Růžička, Vlastimil

    1992-07-01

    Full Text Available The spider fauna of the Adrspach-Teplice rockswas investigated. Some records on spider fauna of other nine sandstone rock areas are included. The phenomenon of "rock cities" manifests itself in three aspects: (1 In the bottom parts are microclimatically cold spaces, frequently hosting northern ot mountain species of invertebrates, which here have an azonal occurence. (2 the sun exposed tops of rocks can host thermophilous species. (3 Some species are limited to the surface of rocks and boulders. These are referred to as lithophilous or lithobiont species.

  8. Core Flooding Experiments and Reactive Transport Modeling of Seasonal Heat Storage in the Hot Deep Gassum Sandstone Formation

    DEFF Research Database (Denmark)

    Holmslykke, Hanne D.; Kjøller, Claus; Fabricius, Ida Lykke

    2017-01-01

    Seasonal storage of excess heat in hot deep aquifers is considered to optimize the usage of commonly available energy sources. The chemical effects of heating the Gassum Sandstone Formation to up to 150 degrees C is investigated by combining laboratory core flooding experiments with petrographic...... process at 150 degrees C, resulting in a significant increase in the aqueous silicium concentration. At temperatures,100 degrees C, the silicium concentration was controlled by a quasi-stationary state between feldspar dissolution and kaolinite precipitation whereas the concentration was kinetically...

  9. Elastic moduli of sandstones saturated with a range of pore fluids correlated with kinematic viscosity and frequency ratio

    DEFF Research Database (Denmark)

    Sørensen, Morten Kanne; Fabricius, Ida Lykke

    2011-01-01

    is a common need in exploration geophysics. Such modeling commonly involves formulation of a set of frame parameters which are then perturbed by the presence of a fluid in the pores. Frame parameters are extracted from laboratory measurements on dry samples meaning samples saturated only with air....... The purpose of this study is to investigate if frame parameters can be extracted from air saturated measurements in sandstones, because earlier studies have shown that air may have a non-negligible effect on carbonates due to the high kinematic viscosity of air (Fabricius et al., 2010)....

  10. Petrographic study of the Miocene-Pleistocene sandstone in the Western Foothills, northern Taiwan: implication for the unroofing history of Taiwan orogenic belt

    Science.gov (United States)

    Jia-Jhih, Yeh; Wen-Shan, Chen

    2017-04-01

    The Taiwan orogeny belt developed due to the arc-continental collision since about 6 Ma. Plio-Pleistocene foreland basin deposits are eroded from adjacent orogenic belt that provides much information about orogenic tectonics. In this study, sandstone petrography is enabled to trace orogenic exhumation history of the northern Taiwan. It indicates that late Miocene-early Pliocene strata were composed dominantly of monocrystalline quartz and feldspar deriving from the Eurasia continent. Late Pliocene-early Pleistocene sandstone (3.6-2Ma) contains lithic fragments which consist dominantly of sandstone fragments. It suggests that the sediments were derived from sedimentary province (Miocene strata) of the orogenic belt. The middle Pleistocene sandstone (1.5Ma) consists of argillite and metasandstone fragments (Oligocene strata) deriving from low-grade metamorphic province (the Hsuehshan Range). The late Pleistocene sandstone consists of quartzite fragments (Eocene strata) which were derived from metamorphic province (the Hsuehshan Range). The exhumation history of orogenic belt is revealed significant changes from sedimentary to metamorphic provinces during the middle Pleistocene. It suggests that the Hsuehshan Range exposed since middle Pleistocene. Lithic fragments derived from the Taiwan orogenic belt that corresponded with the unroofing history of the northern Hsuehshan Range by apatite and zircon fission track dating (1.2-2.6Ma and 4.6-6.4Ma).

  11. PRELIMINARY ESTIMATE OF CO2 STORAGE CAPACITY BY PETROPHYSICAL MODELLING IN UPPER MIOCENE POLJANA SANDSTONES IN THE WESTERN PART OF THE SAVA DEPRESSION

    Directory of Open Access Journals (Sweden)

    Marija Podbojec

    2016-02-01

    Full Text Available A preliminary assessment of the capacity of regional geological storage in the western part of the Sava Depression was based on data obtained from several deep exploration wells. The Poljana Sandstones represent a regional deep sandstone body, in most parts saturated with water, with promising underground facilities for the storage of CO₂ in the study area. Poljana Sandstones (member of Kloštar-Ivanić Formation bounded between E-log markers Rνand Z' have favourable petrophysical properties and are situated at reasonable depths. According to previous investigations, at depths greater than 800 meters supercritical conditions of temperature and pressure CO₂ are achieved, which ensures easy and safe injection into storage underground facilities. For the creation of a model in Petrel software, various data was used, including the distribution of CO₂ density, porosity, effective thickness and the relative depth of sandstone. Spatial distribution of porosity was made regarding neutron porosity logs. The most important parameter in the estimate of storage capacity is effective thickness, defined by the interval between E–log markers Rν and Z’. Hence, the effective thickness was used for top and bottom surface of sandstones. Density of CO₂ was created according to their spatial distribution regarding the depth and the temperature. The capacity of CO2 storage was calculated by the volumetric method. The use of a calculated Petrel model can subsequently determine the amount of CO₂ storage in the underground facilities of the study area.

  12. Revitalizing a mature oil play: Strategies for finding and producing oil in Frio Fluvial-Deltaic Sandstone reservoirs of South Texas

    Energy Technology Data Exchange (ETDEWEB)

    Knox, P.R.; Holtz, M.H.; McRae, L.E. [and others

    1996-09-01

    Domestic fluvial-dominated deltaic (FDD) reservoirs contain more than 30 Billion barrels (Bbbl) of remaining oil, more than any other type of reservoir, approximately one-third of which is in danger of permanent loss through premature field abandonments. The U.S. Department of Energy has placed its highest priority on increasing near-term recovery from FDD reservoirs in order to prevent abandonment of this important strategic resource. To aid in this effort, the Bureau of Economic Geology, The University of Texas at Austin, began a 46-month project in October, 1992, to develop and demonstrate advanced methods of reservoir characterization that would more accurately locate remaining volumes of mobile oil that could then be recovered by recompleting existing wells or drilling geologically targeted infill. wells. Reservoirs in two fields within the Frio Fluvial-Deltaic Sandstone (Vicksburg Fault Zone) oil play of South Texas, a mature play which still contains 1.6 Bbbl of mobile oil after producing 1 Bbbl over four decades, were selected as laboratories for developing and testing reservoir characterization techniques. Advanced methods in geology, geophysics, petrophysics, and engineering were integrated to (1) identify probable reservoir architecture and heterogeneity, (2) determine past fluid-flow history, (3) integrate fluid-flow history with reservoir architecture to identify untapped, incompletely drained, and new pool compartments, and (4) identify specific opportunities for near-term reserve growth. To facilitate the success of operators in applying these methods in the Frio play, geologic and reservoir engineering characteristics of all major reservoirs in the play were documented and statistically analyzed. A quantitative quick-look methodology was developed to prioritize reservoirs in terms of reserve-growth potential.

  13. Anatomy of biologically mediated opal speleothems in the World's largest sandstone cave: Cueva Charles Brewer, Chimantá Plateau, Venezuela

    Science.gov (United States)

    Aubrecht, R.; Brewer-Carías, Ch.; Šmída, B.; Audy, M.; Kováčik, Ľ.

    2008-01-01

    Siliceous speleothems can be formed in sandstone caves. Recently, opal "biospeleothems" have been found in the World's largest cave in Precambrian sandstones on the Chimantá Tepui in Venezuela. The speleothems, although reminiscent of normal stalactites and stalagmites from limestone caves, are in fact large microbialites. More than a dozen forms were distinguished, but they share a common structure and origin. They consist of two main types: 1. fine-laminated columnar stromatolite formed by silicified filamentous microbes (either heterotrophic filamentous bacteria or cyanobacteria) and 2. a porous peloidal stromatolite formed by Nostoc-type cyanobacteria. The first type usually forms the central part and the second type, the outer part, of speleothems. Fungal hyphae, metazoan and plant remains also subordinately contribute to speleothem construction. The speleothems occur out of the reach of flowing water; the main source of silica is the condensed cave moisture which is the main dissolution-reprecipitation agent. Speleothems which originated by encrustation of spider threads are unique.

  14. Geologic Sequestration of CO2 and Associated H2S and SO2 in Bedded Sandstone-Shale Sequences

    Science.gov (United States)

    Xu, T.; Apps, J. A.; Pruess, K.

    2003-12-01

    The injection of CO2 and associated acid gases such as H2S and SO2 into deep sedimentary aquifers is a means by which net anthropogenic atmospheric emissions of greenhouse gases might be reduced. Aquifer host rock aluminosilicate minerals alter very slowly under ambient conditions and their study is not amenable to laboratory experiment. We therefore developed a numerical model to investigate the fate of CO2 and other acid gases in bedded sandstone-shale sequences using hydrogeologic properties and mineral compositions characteristic of Texas Gulf Coast sediments. The simulations were performed using the reactive fluid flow and geochemical transport code, TOUGHREACT, to analyze mass transfer between sandstone and shale layers, the consequent immobilization of gases through mineral precipitation, and the impact of co-contaminated H2S and SO2 gases on CO2 sequestration. The gas sequestration capacity by both aqueous and mineral phases was evaluated. Porosity changes due to mineral dissolution and precipitation were also monitored. The simulations provide useful insights into potential sequestration processes, and their controlling conditions and parameters during long-term containment of acid gases in deep sedimentary formations.

  15. High-Precision Spectral Decomposition Method Based on VMD/CWT/FWEO for Hydrocarbon Detection in Tight Sandstone Gas Reservoirs

    Directory of Open Access Journals (Sweden)

    Hui Chen

    2017-07-01

    Full Text Available Seismic time-frequency analysis methods can be used for hydrocarbon detection because of the phenomena of energy and abnormal attenuation of frequency when the seismic waves travel across reservoirs. A high-resolution method based on variational mode decomposition (VMD, continuous-wavelet transform (CWT and frequency-weighted energy operator (FWEO is proposed for hydrocarbon detection in tight sandstone gas reservoirs. VMD can decompose seismic signals into a set of intrinsic mode functions (IMF in the frequency domain. In order to avoid meaningful frequency loss, the CWT method is used to obtain the time-frequency spectra of the selected IMFs. The energy separation algorithm based on FWEO can improve the resolution of time-frequency spectra and highlight abnormal energy, which is applied to track the instantaneous energy in the time-frequency spectra. The difference between the high-frequency section and low-frequency section acquired by applying the proposed method is utilized to detect hydrocarbons. Applications using the model and field data further demonstrate that the proposed method can effectively detect hydrocarbons in tight sandstone reservoirs, with good anti-noise performance. The newly-proposed method can be used as an analysis tool to detect hydrocarbons.

  16. Quantifying Porosity through Automated Image Collection and Batch Image Processing: Case Study of Three Carbonates and an Aragonite Cemented Sandstone

    Directory of Open Access Journals (Sweden)

    Jim Buckman

    2017-08-01

    Full Text Available Modern scanning electron microscopes often include software that allows for the possibility of obtaining large format high-resolution image montages over areas of several square centimeters. Such montages are typically automatically acquired and stitched, comprising many thousand individual tiled images. Images, collected over a regular grid pattern, are a rich source of information on factors such as variability in porosity and distribution of mineral phases, but can be hard to visually interpret. Additional quantitative data can be accessed through the application of image analysis. We use backscattered electron (BSE images, collected from polished thin sections of two limestone samples from the Cretaceous of Brazil, a Carboniferous limestone from Scotland, and a carbonate cemented sandstone from Northern Ireland, with up to 25,000 tiles per image, collecting numerical quantitative data on the distribution of porosity. Images were automatically collected using the FEI software Maps, batch processed by image analysis (through ImageJ, with results plotted on 2D contour plots with MATLAB. These plots numerically and visually clearly express the collected porosity data in an easily accessible form, and have application for the display of other data such as pore size, shape, grain size/shape, orientation and mineral distribution, as well as being of relevance to sandstone, mudrock and other porous media.

  17. Artificial Weathering as a Function of CO2 Injection in Pahang Sandstone Malaysia: Investigation of Dissolution Rate in Surficial Condition

    Science.gov (United States)

    Jalilavi, Madjid; Zoveidavianpoor, Mansoor; Attarhamed, Farshid; Junin, Radzuan; Mohsin, Rahmat

    2014-01-01

    Formation of carbonate minerals by CO2 sequestration is a potential means to reduce atmospheric CO2 emissions. Vast amount of alkaline and alkali earth metals exist in silicate minerals that may be carbonated. Laboratory experiments carried out to study the dissolution rate in Pahang Sandstone, Malaysia, by CO2 injection at different flow rate in surficial condition. X-ray Powder Diffraction (XRD), Scanning Electron Microscope (SEM) with Energy Dispersive X-ray Spectroscopy (EDX), Atomic Absorption Spectroscopy (AAS) and weight losses measurement were performed to analyze the solid and liquid phase before and after the reaction process. The weight changes and mineral dissolution caused by CO2 injection for two hours CO2 bubbling and one week' aging were 0.28% and 18.74%, respectively. The average variation of concentrations of alkaline earth metals in solution varied from 22.62% for Ca2+ to 17.42% for Mg2+, with in between 16.18% observed for the alkali earth metal, potassium. Analysis of variance (ANOVA) test is performed to determine significant differences of the element concentration, including Ca, Mg, and K, before and after the reaction experiment. Such changes show that the deposition of alkali and alkaline earth metals and the dissolution of required elements in sandstone samples are enhanced by CO2 injection.

  18. Effects of heat-flow and hydrothermal fluids from volcanic intrusions on authigenic mineralization in sandstone formations

    Directory of Open Access Journals (Sweden)

    Wolela Ahmed

    2002-06-01

    Full Text Available Volcanic intrusions and hydrothermal activity have modified the diagenetic minerals. In the Ulster Basin, UK, most of the authigenic mineralization in the Permo-Triassic sandstones pre-dated tertiary volcanic intrusions. The hydrothermal fluids and heat-flow from the volcanic intrusions did not affect quartz and feldspar overgrowths. However, clay mineral-transformation, illite-smectite to illite and chlorite was documented near the volcanic intrusions. Abundant actinolite, illite, chlorite, albite and laumontite cementation of the sand grains were also documented near the volcanic intrusions. The abundance of these cementing minerals decreases away from the volcanic intrusions.In the Hartford Basin, USA, the emplacement of the volcanic intrusions took place simultaneous with sedimentation. The heat-flow from the volcanic intrusions and hydrothermal activity related to the volcanics modified the texture of authigenic minerals. Microcrystalline mosaic albite and quartz developed rather than overgrowths and crystals near the intrusions. Chlorite clumps and masses were also documented with microcrystalline mosaic albite and quartz. These features are localized near the basaltic intrusions. Laumontite is also documented near the volcanic intrusions. The reservoir characteristics of the studied sandstone formations are highly affected by the volcanic and hydrothermal fluids in the Hartford and the Ulster Basin. The porosity dropped from 27.4 to zero percent and permeability from 1350 mD to 1 mD.

  19. Uranium-Series Disequilibria in the Groundwater of the Shihongtan Sandstone-Hosted Uranium Deposit, NW China

    Directory of Open Access Journals (Sweden)

    Xinjian Peng

    2015-12-01

    Full Text Available Uranium (U concentration and the activities of 238U, 234U, and 230Th were determined for groundwaters, spring waters, and lake water collected from the Shihongtan sandstone-hosted U ore district and in the surrounding area, NW China. The results show that the groundwaters from the oxidizing aquifer with high dissolved oxygen concentration (O2 and oxidation-reduction potential (Eh are enriched in U. The high U concentration of groundwaters may be due to the interaction between these oxidizing groundwaters and U ore bodies, which would result in U that is not in secular equilibrium. Uranium is re-precipitated as uraninite on weathered surfaces and organic material, forming localized ore bodies in the sandstone-hosted aquifer. The 234U/238U, 230Th/234U, and 230Th/238U activity ratios (ARs for most water samples show obvious deviations from secular equilibrium (0.27–2.86, indicating the presence of water-rock/ore interactions during the last 1.7 Ma and probably longer. The 234U/238U AR generally increases with decreasing U concentrations in the groundwaters, suggesting that mixing of two water sources may occur in the aquifer. This is consistent with the fact that most of the U ore bodies in the deposit have a tabular shape originati from mixing between a relatively saline fluid and a more rapidly flowing U-bearing meteoric water.

  20. Relations between shallow cataclastic faulting and cementation in porous sandstones: First insight from a groundwater environmental context

    Science.gov (United States)

    Philit, Sven; Soliva, Roger; Labaume, Pierre; Gout, Claude; Wibberley, Christopher

    2015-12-01

    The interplay between fault zone cataclasis and cementation is important since both processes can drastically reduce the permeability of faults in porous sandstones. Yet the prediction of fault cementation in high-porosity sandstone reservoirs remains elusive. Nevertheless, this process has rarely been investigated in shallowly buried faults (<2 km; T°<80 °C) where its sealing capacity could be acquired early in the geological history of a reservoir. In this paper, the macro- and microscopic analysis of a fault zone in the porous Cenomanian quartz arenite sands of Provence (France) shows that silica diagenesis occurs in the most intensely-deformed cataclastic parts of the fault zone. This fault zone shows 19-48% of its total thickness occupied by low-porosity quartz-cemented cataclastic shear bands whose porosities range from 0 - ca. 5%. The analysis of the weathering profile around the fault zone reveals the presence of groundwater silcretes in the form of tabular, tightly silicified concretions cross-cut by the fault. Detailed transmitted light, cold-cathodoluminescence and scanning electron microscopy analyses of the silica cements (from the fault and the silcrete) reveal that all the silica cements originate from groundwater diagenetic processes. This study therefore shows that silica cementation can occur specifically in fault zones and as groundwater silcrete in the shallow context of a groundwater system, generated at the vicinity of an erosional unconformity.

  1. Reservoir zonation based on statistical analyses: A case study of the Nubian sandstone, Gulf of Suez, Egypt

    Science.gov (United States)

    El Sharawy, Mohamed S.; Gaafar, Gamal R.

    2016-12-01

    Both reservoir engineers and petrophysicists have been concerned about dividing a reservoir into zones for engineering and petrophysics purposes. Through decades, several techniques and approaches were introduced. Out of them, statistical reservoir zonation, stratigraphic modified Lorenz (SML) plot and the principal component and clustering analyses techniques were chosen to apply on the Nubian sandstone reservoir of Palaeozoic - Lower Cretaceous age, Gulf of Suez, Egypt, by using five adjacent wells. The studied reservoir consists mainly of sandstone with some intercalation of shale layers with varying thickness from one well to another. The permeability ranged from less than 1 md to more than 1000 md. The statistical reservoir zonation technique, depending on core permeability, indicated that the cored interval of the studied reservoir can be divided into two zones. Using reservoir properties such as porosity, bulk density, acoustic impedance and interval transit time indicated also two zones with an obvious variation in separation depth and zones continuity. The stratigraphic modified Lorenz (SML) plot indicated the presence of more than 9 flow units in the cored interval as well as a high degree of microscopic heterogeneity. On the other hand, principal component and cluster analyses, depending on well logging data (gamma ray, sonic, density and neutron), indicated that the whole reservoir can be divided at least into four electrofacies having a noticeable variation in reservoir quality, as correlated with the measured permeability. Furthermore, continuity or discontinuity of the reservoir zones can be determined using this analysis.

  2. Paleomagnetic results from Northeast Anatolia: remagnetization in Late Cretaceous sandstones and tectonic rotation at the Eastern extension of the Izmir-Ankara-Erzincan suture zone

    Science.gov (United States)

    Cengiz Çinku, Mualla

    2017-12-01

    Paleomagnetic results obtained from Upper Cretaceous sandstones in Northeastern Anatolia demonstrate that the entire area from Erzincan to Kars has been remagnetised. The remagnetisation was acquired before the Middle Eocene collision between the Eastern Pontides and the Arabian Platform because Middle Eocene sandstones carry primary natural remanent magnetisations. The post-folding in situ mean direction of the Upper Cretaceous sandstones is compared with mean directions of younger, Middle Eocene to present rock formations. As a result, a two-stage antagonistic rotation mechanism is proposed. First, the collision between the Pontides and the Taurides between Late Cretaceous and Middle Eocene was associated by clockwise rotation of 26°. In the second stage between Middle Eocene and Middle Miocene and beyond, counterclockwise rotations up to 52° of the Pontide and Anatolide blocks and clockwise rotations of the Van Block were characterised by regional shortening and westward escape.

  3. Hydrogeology of the Point Lookout Sandstone in the San Juan structural basin, New Mexico, Colorado, Arizona and Utah

    Science.gov (United States)

    Craigg, Steven D.; Dam, W.L.; Kernodle, J.M.; Thorn, C.R.; Levings, G.W.

    1990-01-01

    This report is one in a series resulting from the U.S. Geological Survey's Regional Aquifer-System Analysis (RASA) study of the San Juan structural basin that began in October 1984. Previous reports in the series describe the hydrogeology of the Dakota Sandstone (Craigg and others, 1989), Morrison Formation (Dam and others, 1990), Gallup Sandstone (Kernodle and others, 1989), Menefee Formation (Levings and others, 1990), and Cliff House Sandstone (Thorn and others, 1990), in the San Juan structural basin. The purposes of the RASA (Welder, 1986) are to: (1) Define and evaluate the aquifer system; (2) assess the effects of past, present, and potential ground-water use on aquifers and streams; and (3) determine the availability and quality of ground water. This report summarizes information on the geology and the occurrence and quality of water in the Point Lookout Sandstone, one of the primary water-bearing units in the regional aquifer system. Data used in this report were collected during the study or were derived from existing records in the U.S. Geological Survey's computerized National Water Information System (NWIS) data base, the Petroleum Information Corporation's database, and the Dwight's ENERGYDATA Inc. BRIN data base. Although all data available for the Point Lookout Sandstone were considered in formulating the discussions in the text, not all those data could be plotted on the illustrations. The San Juan structural basin is in New Mexico, Colorado, Arizona, and Utah and has an area of about 21,600 square miles (fig. 1). The structural basin is about 140 miles wide and about 200 miles long. The study area is that part of the structural basin that contains rocks of Triassic or younger age and, therefore, is less areally extensive than the structural basin. Triassic through Tertiary sedimentary rocks are emphasized in this study because the major aquifers in the basin are present in these rocks. The study area is about 140 miles wide (about the same as the

  4. Hydrogeology of the Cliff House Sandstone in the San Juan structural basin, New Mexico, Colorado, Arizona and Utah

    Science.gov (United States)

    Thorn, Conde R.; Levings, G.W.; Craigg, S.D.; Dam, W.L.; Kernodle, J.M.

    1990-01-01

    This report is one in a series resulting from the U.S. Geological Survey's Regional Aquifer-System Analysis (RASA) study of the San Juan structural basin that began in October 1984. Previous reports in the series describe the hydrogeology of the Dakota Sandstone (Craigg and others, 1989), Point Lookout Sandstone (Craigg and others, 1990), Morrison Formation (Dam and others, 1990), Gallup Sandstone (Kernodle and others, 1989), and Menefee Formation (Levings and others, 1990) in the San Juan structural basin. The purposes of the RASA (Welder, 1986) are to: (1) Define and evaluate the aquifer system; (2) assess the effects of past, present, and potential ground-water use on aquifers and streams; and (3) determine the availability and quality of ground water. This report summarizes information on the geology and the occurrence and quality of water in the Cliff House Sandstone, one of the primary water-bearing units in the regional aquifer system. Data used in this report were collected during the study or were derived from existing records in the U.S. Geological Survey's computerized National Water Information System (NWIS) data base, the Petroleum Information Corporation's data base, and the Dwight's ENERGYDATA Inc. BRIN data base. Although all data available for the Cliff House Sandstone were considered in formulating the discussions in the text, not all those data could be plotted on the illustrations. The San Juan structural basin is in New Mexico, Colorado, Arizona, and Utah and has an area of about 21,600 square miles (fig. 1). The structural basin is about 140 miles wide and about 200 miles long. The study area is that part of the structural basin that contains rocks of Triassic or younger age and, therefore, is less extensive than the structural basin. Triassic through Tertiary sedimentary rocks are emphasized in this study because the major aquifers in the basin are present in these rocks. The study area is about 140 miles wide (about the same as the

  5. A new model for the provenance of the Upper Devonian Old Red Sandstone (UORS) of southern Ireland

    Science.gov (United States)

    Ennis, Meg; Meere, Pat; Timmerman, Martin

    2010-05-01

    The geology of Southern Ireland is dominated by the influence of both the Caledonian and Variscan orogenies which have shaped the landscape of today. The Old Red Sandstone (ORS) sequences of the Middle - Upper Devonian Munster Basin have traditionally been viewed as a post-orogenic molasse deposit sourced from the Caledonides (Friend et al. 2000 & references therein), which were subsequently deformed by the Late Carboniferous Variscan Orogeny. This model does not take into account the potential impact of the Acadian Orogeny, an Early to Mid Devonian transpressional tectonic event which culminated in Mid Emsian times and resulted in the deformation and inversion of Lower ORS (LORS) basins across Britain and Ireland (Soper & Woodcock 2003; Meere & Mulchrone 2006). Evidence of Acadian deformation in Southern Ireland is recorded in the LORS sequence of the Lower-Middle Devonian basin, the Dingle Basin. Meere & Mulchrone (2006) show that penetrative deformation visible in the LORS of the Dingle Basin has an Acadian signature and is not associated with Late Carboniferous Variscan compression (Parkin 1976; Todd 2000). The role of the Acadian Orogeny in the tectono-sedimentary evolution of Southern Ireland has been analyzed in this study using a multidisciplinary approach. Petrographic analysis of both the LORS and Upper ORS (UORS) of southern Ireland suggests an alternative provenance model in which there is a direct genetic link between the two Devonian deposits. There is a fining-up relationship between the two basins and the volcanic lithic fragments - while extremely limited in occurrence in the Munster Basin - are strikingly similar in both units. The absence of conglomeratic units at the base of the Munster Basin provide further evidence that the UORS does not represent a classic molasse deposit. This is supported by EMPA data from both basins which indicates identical mica chemistries in both the LORS and UORS. A comparison with the white mica chemistries from a

  6. Coupled Reactive Transport Modeling of CO2 Injection in Mt. Simon Sandstone Formation, Midwest USA

    Science.gov (United States)

    Liu, F.; Lu, P.; Zhu, C.; Xiao, Y.

    2009-12-01

    CO2 sequestration in deep geological formations is one of the promising options for CO2 emission reduction. While several large scale CO2 injections in saline aquifers have shown to be successful for the short-term, there is still a lack of fundamental understanding on key issues such as CO2 storage capacity, injectivity, and security over multiple spatial and temporal scales that need to be addressed. To advance these understandings, we applied multi-phase coupled reactive mass transport modeling to investigate the fate of injected CO2 and reservoir responses to the injection into Mt. Simon Formation. We developed both 1-D and 2-D reactive transport models in a radial region of 10,000 m surrounding a CO2 injection well to represent the Mt. Simon sandstone formation, which is a major regional deep saline reservoir in the Midwest, USA. Supercritical CO2 is injected into the formation for 100 years, and the modeling continues till 10,000 years to monitor both short-term and long-term behavior of injected CO2 and the associated rock-fluid interactions. CO2 co-injection with H2S and SO2 is also simulated to represent the flue gases from coal gasification and combustion in the Illinois Basin. The injection of CO2 results in acidified zones (pH ~3 and 5) adjacent to the wellbore, causing progressive water-rock interactions in the surrounding region. In accordance with the extensive dissolution of authigenic K-feldspar, sequential precipitations of secondary carbonates and clay minerals are predicted in this zone. The vertical profiles of CO2 show fingering pattern from the top of the reservoir to the bottom due to the density variation of CO2-impregnated brine, which facilitate convection induced mixing and solubility trapping. Most of the injected CO2 remains within a radial distance of 2500 m at the end of 10,000 years and is sequestered and immobilized by solubility and residual trapping. Mineral trapping via secondary carbonates, including calcite, magnesite

  7. Reproductive biology of Echinometra lucunter (Echinodermata: Echinoidea in a northeast Brazilian sandstone reef

    Directory of Open Access Journals (Sweden)

    Eduardo J.B. Lima

    2009-03-01

    Full Text Available The edible sea urchin Echinometra lucunter (Linnaeus, 1758 is a very common species on the sublittoral-midlittoral in Brazilian rocky shores. The aim of this work was to describe the gametogenesis and reproductive strategy of the E. lucunter population at Muro Alto beach in the Northeast coast of Brazil from August 2004 to August 2005. A total of 240 specimens were collected on the sandstone reef flat from a tidepool during spring low tides. The overall sex ratio was1.12:1,withoutsignificanttemporalvariationexceptinOctober2004. Firsts sexual maturity ocurred in individuals from a diameter of 20.8 mm. There was not a significant difference in gonad index between females and males during the sampling period. The female's gonad index variation was associated with a well-defined spawning, corroborated by the histological analysis of the gonads, which demonstrates sex differences of the gamete production. By contrast, the males showed no clear pattern. It is suggested that continuous reproduction with seasonal peaks in the E. lucunter population occurs at Muro Alto beach.O ouriço-do-mar comestível Echinometra lucunter (Linnaeus, 1758 é uma espécie muito comum no infralitoral e mediolitoral do Brasil. O objetivo deste trabalho foi descrever a gametogênese e a estratégia reprodutiva da população de E. lucunterna praia de Muro Alto entre agosto de 2004 e agosto de 2005. Um total de 240 espécimes foi capturado de uma poça de maré situada no topo recifal, durante as marés baixas de sizígia. A razão sexual total foi de 1,12:1 sem variação temporal significativa, exceto em outubro de 2004. A primeira maturidade sexual ocorreu em indivíduos a partir de 20,8 mm de diâmetro. Não houve nenhuma diferença significativa no índice gonadal entre fêmeas e machos durante o período de amostragem. A variação do índice gonadal das fêmeas foi associada a um período de desova bem definido, corroborado pela análise histológica das gônadas, que

  8. Mechanical Compaction of Porous Sandstone Compaction mécanique des grès poreux

    Directory of Open Access Journals (Sweden)

    Wong T. F.

    2006-12-01

    Full Text Available In many reservoir engineering and tectonic problems, the ability to predict both the occurrence and extent of inelastic deformation and failure hinges upon a fundamental understanding of the phenomenology and micromechanics of compaction in reservoir rock. This paper reviews recent research advances on mechanical compaction of porous sandstone, with focus on the synthesis of laboratory data, quantitative microstructural characterization of damage, and theoretical models based on elastic contact and fracture mechanics. The mechanical attributes of compaction in nominally dry and saturated samples have been studied under hydrostatic and nonhydrostatic loadings over a broad range of pressure conditions. Specific topics reviewed herein include: comparison of mechanical and acoustic emission data with continuum plasticity theory; microstructural control of onset and development of compaction; strain hardening and spatial evolution of damage during compaction; and the weakening effect of water on compactive yield and porosity change. Pour de nombreux problèmes de tectonique et d'ingénierie de réservoir, la capacité à prévoir à la fois la fréquence, l'ampleur de la déformation inélastique et les ruptures repose sur une compréhension fondamentale de la phénoménologie et de la micromécanique de compaction dans les roches-réservoirs. Cet article présente les résultats de recherches récentes sur la compaction mécanique des grès poreux. On insiste plus particulièrement sur la synthèse des données de laboratoire, la caractérisation microstructurale quantitative de l'endommagement, ainsi que sur les modèles théoriques basés sur un contact élastique et sur la mécanique de la rupture. Les attributs mécaniques de la compaction sur des échantillons initialement secs et saturés ont été étudiés sous des chargements hydrostatiques et non hydrostatiques dans une large gamme de pression. Les sujets spécifiques étudiés ici

  9. Rock doughnut and pothole structures of the Clarens Fm. Sandstone in the Karoo Basin, South Africa: Possible links to Lower Jurassic fluid seepage

    Science.gov (United States)

    Grab, Stefan; Svensen, Henrik

    2011-08-01

    South Africa has a wealth of sandstone landforms, yet many of these have not been examined in detail to expand knowledge on their morphology and process origins. Here we present data on primary morphological statistics, rock hardness, surface roughness and petrographic investigations of rock doughnuts and associated pothole structures in Golden Gate Highlands National Park (GGHNP) and in the Witkop III complex, with the aim of using such data and field observations to argue their likely origins. Schmidt hammer R-values indicate consistently harder doughnut rims (mean = 48.7; n = 150) than the enclosed potholes (mean = 37.8; n = 150) and surrounding sandstone platform (mean = 39.7; n = 250). The petrography of Clarens Fm. Sandstone shows that the typical whitish sandstone is affected by intense chemical weathering. Pothole rims and the irregular reddish crust typical of the Witkop III outcrops show a secondary cementation by microcrystalline silica. Although preservation of old land surfaces is difficult to prove, small and circular pipe structures filled with calcite-cemented sand are present locally surrounding the Witkop III hydrothermal complex, and represent conduits for fluidized sand. Based on the morphologies of the Witkop III summit with the associated potholes and pipes, we hypothesize that they are remnants of morphologies created by Jurassic fluid seepage, with a superimposed and secondary silica cementation. Given that fluidization structures evidently occur in Clarens Fm. Sandstone, as is the case at Witkop, such mechanisms could possibly have contributed to the observed rock doughnut structures elsewhere on Clarens Fm. Sandstones, such as at the GGHNP where the rock doughnut morphological attributes are typical to landforms originating from fluid venting.

  10. Hydrogeological exploitation through structural analysis and petrophysical proprieties of the Barremian sandstone-calcareous bar in Agadir-Essaouira basin (Morocco)

    Science.gov (United States)

    Yacoubi, Latifa Al; Amrouch, Khalid; Jaillard, Etienne; Geraud, Yves; Masrour, Moussa; Ougadire, Mohamed; Lkebir, Noura; Bouchaou, Lhoussaine

    2017-04-01

    The Barremian unit in Agadir Essaouira basin consists of a sandstone-calcareous bar alternated with clays. The thickness of this bar is about 30 meters and may consist the best reservoir in the lower Cretaceous units. The porosity and permeability of the sandstones are controlled by carbonate cementation. Several thin sections were studied in details in order to explore the texture and mineral contents. The results show that the sandy limestone and lithic sandstones facies have poor reservoir potential due to the limited fluid circulation. On the other hand, the sandstones are characterized by dolomite crystals replacing carbonates cement, which is confirmed by the petrophysical study. The measurements reveal that the primary permeability is about 1.8 10-4 mD to 1.3 mD in sandy-limestone and about 1.6 mD to 1.3 103 mD in sandstones, while the porosity is about 3.22% to 8.54 % in sandy-limestone and about 13.08% to 23.03 % in sandstones. Detailed fracture analyzes are measured within the Barremian bar in both North and South Atlasic folds. As a result, the fractures are similar between the two synclines, with a major set of N105-130 direction and minor set of N20-30 direction in the North and the South flanks of the South Atlasic fold respectively. The North Atlasic fold showed a major set of N80-100 direction and a minor set of N0-15 direction. The average intensity of fractures is about 11 fractures/m2. The results show that the Barremian unit is controlled by early sedimentlogical processes. The intense fracture network enables water to circulate within fractures which increases the porosity. Chemical water analyzes reveal that the groundwater is enriched on (Ca2+ + Mg2+) and SO42- due water/rock interactions.

  11. Assessment of potential shale oil and tight sandstone gas resources of the Assam, Bombay, Cauvery, and Krishna-Godavari Provinces, India, 2013

    Science.gov (United States)

    Klett, Timothy R.; Schenk, Christopher J.; Wandrey, Craig J.; Brownfield, Michael E.; Charpentier, Ronald R.; Tennyson, Marilyn E.; Gautier, Donald L.

    2014-01-01

    Using a well performance-based geologic assessment methodology, the U.S. Geological Survey estimated a technically recoverable mean volume of 62 million barrels of oil in shale oil reservoirs, and more than 3,700 billion cubic feet of gas in tight sandstone gas reservoirs in the Bombay and Krishna-Godavari Provinces of India. The term “provinces” refer to geologically defined units assessed by the USGS for the purposes of this report and carries no political or diplomatic connotation. Shale oil and tight sandstone gas reservoirs were evaluated in the Assam and Cauvery Provinces, but these reservoirs were not quantitatively assessed.

  12. Reactivity of sandstone and siltstone samples from the Ketzin pilot CO2 storage site-Laboratory experiments and reactive geochemical modeling

    OpenAIRE

    Sebastian Fischer; Axel Liebscher; Marco De Lucia; L. Hecht; Ketzin Team and the

    2013-01-01

    To evaluate mineralogical-geochemical changes within the reservoir of the Ketzin pilot CO2 storage site in Brandenburg, Germany, two sets of laboratory experiments on sandstone and siltstone samples from the Stuttgart Formation have been performed. Samples were exposed to synthetic brine and pure CO2 at experimental conditions and run durations of 5.5 MPa/40 °C/40 months for sandstone and 7.5 MPa/40 °C/6 months for siltstone samples, respectively. Mineralogical changes in both sets of experim...

  13. Formation and dissolution of zeolite during burial diagenesis - Examples from glauconitic sandstones in the Palaeogene Siri Canyon, Danish North Sea

    DEFF Research Database (Denmark)

    Kazerouni, Afsoon Moatari; Friis, Henrik; Svendsen, Johan B

    or diagenetic alteration of volcanic glass. Authigenic zeolites are uncommon constituents in most sandstones. However, authigenic zeolites are common in some of the glauconitic sandstones from the Siri Canyon, where it is generally associated with thick coatings of opal/microquartz on the detrital framework...... Paleocene–early Eocene volcanic ash layers. Zeolites have a hydrated alumosilicate framework with varying amounts of alkali and alkaline earth metals.Authigenic zeolites may be common in deep marine sediments, and in volcanoclastic deposits. They are generally related to dissolution of siliceous fossils...

  14. Stratigraphy, sedimentology and diagenetic evolution of the Lapur Sandstone in northern Kenya: Implications for oil exploration of the Meso-Cenozoic Turkana depression

    Science.gov (United States)

    Tiercelin, Jean-Jacques; Potdevin, Jean-Luc; Thuo, Peter Kinyua; Abdelfettah, Yassine; Schuster, Mathieu; Bourquin, Sylvie; Bellon, Hervé; Clément, Jean-Philippe; Guillou, Hervé; Nalpas, Thierry; Ruffet, Gilles

    2012-08-01

    The northern Turkana region of northwestern Kenya forms the intersection between two major rift systems in Africa, the Cretaceous-Paleogene Central African Rift System (CARS), and the eastern arm of the Paleogene-Present East African Rift System (EARS). The southern Sudanese oil-rich rift basins form part of the CARS, and their extension into the Anza Rift in northeastern Kenya makes the area of northern Turkana an important target for oil exploration. Limited past exploration activity in the area leaves the study of surface outcrops as the main avenue for understanding the reservoir potential of the fluvial deposits of these rift systems. The outcrops of these potential reservoirs, collectively referred to as "Turkana Grits" in the past, are represented on the western side of Lake Turkana by the Lapur Sandstone in the north, and by other grit formations in the central and southern parts of the basin. Isotopic age determinations on the basal parts of the "Turkana Volcanics" that overlie the Lapur Sandstone have enabled the precise dating of the upper parts of the LS at between 35 and 37 Ma, while the lower part of the formation near the contact with the underlying Precambrian basement is estimated as Upper Cretaceous (Turonian-early Campanian), based on the discovery of dinosaur and other reptilian fauna. Detailed lithological logging, coupled with subsequent petrographic and sedimentological studies, have enabled the determination of the depositional environments and the diagenetic evolution of the Lapur Sandstone. The basal and uppermost parts of the formation are interpreted as distal alluvial fan environments possibly connected to the last stages of rifting characterizing the Central African Rift System. The middle part of the Lapur Sandstone corresponds to a wide braided fluvial system that can be compared to fluvial episodes of Late Cretaceous age in the Sudan region, associated to major palaeogeographical changes in northern Africa. The nearly abrupt

  15. Genesis and distribution pattern of carbonate cements in lacustrine deep-water gravity-flow sandstone reservoirs in the third member of the Shahejie Formation in the Dongying Sag, Jiyang Depression, Eastern China

    DEFF Research Database (Denmark)

    Yang, Tian; Cao, Yingchang; Friis, Henrik

    2017-01-01

    deep-water gravity-flow sandstone reservoirs. The sandstones are mainly lithic arkose with an average framework composition of Q43F33L24. The carbonate cements are dominated by calcite, ferroan calcite, ankerite and a small amount of dolomite. The calcite and ferroan calcite are mainly poikilotopic...

  16. Physical Property Changes During CO2 Injection into Sandstone from Pukpyeong Formation, South Korea: Pore-scale Approach

    Science.gov (United States)

    Han, J.; Keehm, Y.

    2010-12-01

    Carbon dioxide is believed to be responsible for global warming and climate change, and Korea government puts a great effort in CCS (Carbon Capture and Storage). The geological sequestration is regarded as one viable option and we are looking for prospecting formations for carbon storage. In this paper, we present a new approach to determine physical property changes during CO2 injection and preliminary results from applying the method to one of prospective Tertiary formation in South Korea. The so-called computational rock physics method is composed of three steps: 1) acquisition of high-resolution pore microstructures by X-ray micro-tomography; 2) CO2 injection simulation using lattice-Boltzmann (LB) two-phase flow simulation; and 3) FEM property simulations (electrical and elastic) at different CO2 saturations during the injection. We have been shown the viability of the method last year. This year we applied this method to one of CS (carbon storage) target area, Pukpyeong formation located in north-eastern part of South Korea. From thin section analysis, we found that the formation is composed of mudstone, sandstone and conglomerate, and most of them are poorly consolidated. The mudstone and poorly-sorted conglomerate are believed to have very low permeability, and the effect of CO2 injection would be significant. Thus we focus on sandstone units and get pore microstructure of those units. We then performed the computational rock physics analysis, and present the relations of Vp - CO2 saturation, and electrical conductivity - CO2 saturation for a few sand units. We also present the preliminary upscaling results by putting combined sandstone and mudstone units into FEM modeling. The modeling results implies that the new computational approach can be very useful to characterizing the CS sites especially in early stage. Acknowledgement: This work was supported by the Energy R&D program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP

  17. A one year post-fire biogeochemical cycling record of a sandstone mountain fynbos ecosystem, South Africa

    Science.gov (United States)

    Bergh, E.; Compton, J. S.

    2012-04-01

    The Cape Floristic Region (CFR) in southwestern South Africa is a Mediterranean-type ecosystem dominated by highly diverse and endemic fynbos vegetation. In this study, the chemistry of rainwater (total wet and dry deposition), stream water and soil saturated paste extracts of the sandstone fynbos biome of the Kogelberg Biosphere Reserve reveals how the cycling of Cl, Na, SO4,Mg, Ca and K varied over a one year period following a major fire event. Fire is a critical component of fynbos ecology, but the fynbos ecosystem is under threat as the fire return frequency increases as a result of human activities. The underlying bedrock geology of the sandstone fynbos biome is dominated by quartz-rich (>97 wt% SiO2) sandstone providing few nutrients to the overlying thin (2 to 20 cm), acidic soils. Additional sources of nutrients to the ecosystem are derived from windblown marine and dust (consisting of minerals, organic matter and fire ash) aerosols. Rainout of marine aerosols decreases away from the coast. The delivery of marine aerosols (Cl, Na, SO4and Mg) corresponds with summer southerly winds from the ocean and windblown dust (SO4,Mg, Ca and K) is delivered through winter northerly winds from the continental interior. Remineralization of organic matter, dissolution of fire ash and chemical weathering of clay minerals derived from the bedrock and from windblown minerals provide additional sources of nutrients to the vegetation. Salts accumulated within and on top of soil surfaces during the dry summer period are washed into streams during the wet winter months. Afromontane forests occur within deep rocky ravines cut by mountain streams and are protected from fire. The afromontane vegetation did not burn during the fire and benefited from the release of nutrients but regrowth of fynbos on open burnt slopes was slow and most of the released nutrients were lost via streams. Fynbos regrowth largely reflected the hydrology of the study area and corresponded to the pre

  18. Formation Damage due to Drilling and Fracturing Fluids and Its Solution for Tight Naturally Fractured Sandstone Reservoirs

    Directory of Open Access Journals (Sweden)

    Tianbo Liang

    2017-01-01

    Full Text Available Drilling and fracturing fluids can interact with reservoir rock and cause formation damage that impedes hydrocarbon production. Tight sandstone reservoir with well-developed natural fractures has a complex pore structure where pores and pore throats have a wide range of diameters; formation damage in such type of reservoir can be complicated and severe. Reservoir rock samples with a wide range of fracture widths are tested through a multistep coreflood platform, where formation damage caused by the drilling and/or fracturing fluid is quantitatively evaluated and systematically studied. To further mitigate this damage, an acidic treating fluid is screened and evaluated using the same coreflood platform. Experimental results indicate that the drilling fluid causes the major damage, and the chosen treating fluid can enhance rock permeability both effectively and efficiently at least at the room temperature with the overburden pressure.

  19. Preliminary assessment report for Virginia Army National Guard Army Aviation Support Facility, Richmond International Airport, Installation 51230, Sandston, Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, C.B.

    1993-09-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Virginia Army National Guard (VaARNG) property in Sandston, Virginia. The Army Aviation Support Facility (AASF) is contiguous with the Richmond International Airport. Preliminary assessments of federal facilities are being conducted to compile the information necessary for completing preremedial activities and to provide a basis for establishing corrective actions in response to releases of hazardous substances. The PA is designed to characterize the site accurately and determine the need for further action by examining site activities, quantities of hazardous substances present, and potential pathways by which contamination could affect public health and the environment. The AASF, originally constructed as an active Air Force interceptor base, provides maintenance support for VaARNG aircraft. Hazardous materials used and stored at the facility include JP-4 jet fuel, diesel fuel, gasoline, liquid propane gas, heating oil, and motor oil.

  20. Correlative multiple porosimetries for reservoir sandstones with adoption of a new reference-sample-guided computed-tomographic method

    Science.gov (United States)

    Jin, Jae Hwa; Kim, Junho; Lee, Jeong-Yil; Oh, Young Min

    2016-01-01

    One of the main interests in petroleum geology and reservoir engineering is to quantify the porosity of reservoir beds as accurately as possible. A variety of direct measurements, including methods of mercury intrusion, helium injection and petrographic image analysis, have been developed; however, their application frequently yields equivocal results because these methods are different in theoretical bases, means of measurement, and causes of measurement errors. Here, we present a set of porosities measured in Berea Sandstone samples by the multiple methods, in particular with adoption of a new method using computed tomography and reference samples. The multiple porosimetric data show a marked correlativeness among different methods, suggesting that these methods are compatible with each other. The new method of reference-sample-guided computed tomography is more effective than the previous methods when the accompanied merits such as experimental conveniences are taken into account. PMID:27445105

  1. The history and fate of the Nubian Sandstone Aquifer springs in the oasis depressions of the Western Desert, Egypt

    Science.gov (United States)

    Powell, Owen; Fensham, Rod

    2016-03-01

    Extraction of groundwater for agriculture has resulted in the loss of springs across arid regions of the globe. The history and fate are recorded of the artesian springs of Egypt's Western Desert, from ancient times to the present, spanning the rise and fall of the great civilisations from the Pharoanic dynasties to Persian, Greek and Roman conquests. The study area includes oases Kharga, Dakhla, Bahriya, Farafra and Siwa, and several outer and small oases around Siwa and the edge of the Qattara Depression. The region is hyper-arid, receiving 10 mm or less average annual precipitation and evaporation rates are in the vicinity of 3,000 mm/a. Groundwater in the oases is largely derived from bores discharging from the Nubian Sandstone Aquifer. Based on an extensive survey, conducted for the first time, attention is drawn to the rapid demise of springs as a result of modern irrigation schemes which continue to deplete groundwater supplies.

  2. Investigation of CO2 Enhanced Oil Recovery Using Dimensionless Groups in Wettability Modified Chalk and Sandstone Rocks

    Directory of Open Access Journals (Sweden)

    Vahid Alipour Tabrizy

    2014-01-01

    Full Text Available The paper addresses enhanced oil recovery in chalk and sandstone rocks by CO2 injection, with different wettability, porosity, and permeability as well as injection rate and flooding conditions. Results indicate that an increase in Bond number has a positive effect on oil recovery whereas for capillary number, there is a limit in which recovery is improving. This limit is estimated when the pressure drop by viscous force is approximately equal to the threshold balance between capillary and gravity forces. A dimensionless group is proposed that combines the effect of capillarity, injection rate, permeability, and CO2 diffusion on the oil recovery. Recovery from all experiments in this study and reported data in the literature shows a satisfactory relationship with the proposed group.

  3. Some aspects of lithological and exogenic control of sandstone morphology, the Świętokrzyskie (Holy Cross) Mts. case study, Poland

    Science.gov (United States)

    Urban, Jan; Górnik, Marek

    2017-10-01

    Various morphologies of cliffs built of different quartzose rocks in the Świętokrzyskie (Holy Cross) Mts. (upland region, central Poland) - from Cambrian quartzites and Devonian quartzitic sandstones to Triassic and Jurassic porous sandstones - were described in order to examine the constraints of their lithological and spatial occurrence. The quantitative study of the occurrence of these morphologies on cliffs makes it possible to distinguish two principal groups of morphologies: angular relief produced by rock splitting (crumbling), typical of quartzites indurated in silica and of open porosity less than 1.5%, and morphologies developed due to granular disintegration and exfoliation of sandstones of open porosity higher than 1.5%. Among the relief types of this second group, morphology reflecting sedimentary and diagenetic structures as well as smooth surfaces are the most common and are referred to sandstones of a wide range of porosity, whereas honeycombs and surfaces suffering fast granular decay and scaling are characteristic of rocks of specific porosity (respectively: 5-8% and 3.5-8%). The occurrence of honeycombs on rock surfaces is also conditioned by exogenic factors: sun, wind and rain, since this morphology tends to occur on cliffs with aspects ranging from south-east, through south, to west-north-west.

  4. Service life assessment of historical building envelopes constructed using different types of sandstone: a computational analysis based on experimental input data.

    Science.gov (United States)

    Kočí, Václav; Maděra, Jiří; Fořt, Jan; Žumár, Jaromír; Pavlíková, Milena; Pavlík, Zbyšek; Černý, Robert

    2014-01-01

    Service life assessment of three historical building envelopes constructed using different types of sandstone is presented. At first, experimental measurements of material parameters of sandstones are performed to provide the necessary input data for a subsequent computational analysis. In the second step, the moisture and temperature fields across the studied envelopes are calculated for a representative period of time. The computations are performed using dynamic climatic data as the boundary conditions on the exterior side of building envelope. The climatic data for three characteristic localities are experimentally determined by the Czech Hydrometeorological Institute and contain hourly values of temperature, relative humidity, rainfalls, wind velocity and direction, and sun radiation. Using the measured durability properties of the analyzed sandstones and the calculated numbers of freeze/thaw cycles under different climatic conditions, the service life of the investigated building envelopes is assessed. The obtained results show that the climatic conditions can play a very significant role in the service life assessment of historical buildings, even in the conditions of such a small country as the Czech Republic. In addition, the investigations reveal the importance of the material characteristics of sandstones, in particular the hygric properties, on their service life in a structure.

  5. Asymmetrical cross-current turbidite facies tract in a structurally-confined mini-basin (Priabonian-Rupelian, Ranzano Sandstone, northern Apennines, Italy)

    NARCIS (Netherlands)

    Tinterri, R.; Laporta, M.; Ogata, K.

    2017-01-01

    This work discusses the stratigraphy and facies analysis of the Ranzano Sandstone, in the northern Apennines (Italy), a confined low-efficiency turbidite system deposited in a series of small piggy-back basins, which show strong analogies with intraslope minibasins commonly observed in divergent

  6. Sedimentary association of alternated mudstones and tight sandstones in China's oil and gas bearing basins and its natural gas accumulation

    Science.gov (United States)

    Zhu, Guangyou; Gu, Lijing; Su, Jin; Dai, Jinxing; Ding, Wenlong; Zhang, Jinchuan; Song, Lichen

    2012-05-01

    Oil and gas resources are abundant in China's continental sedimentary basins, where the main task of exploration has been finding oil for many years. In recent years, however, new discoveries of large-scale natural gas have been successively obtained. The natural gas mainly exists in the sedimentary association of alternated mudstones and tight sandstones and is dominantly low-permeability tight sand gas. Through the in-depth study on gas reservoir analysis, diagenetic evolution, source rock distribution and hydrocarbon-generating behavior, natural gas generation and accumulation, it is concluded that, during the major subsiding stage of large scale lake basins, the multicyclic subsiding process of the lake surface controls the development of high quality source rocks, the wide distribution of sands, and the superimposition of the two types of rocks in the vertical direction. The lacustrine muddy source rocks are developed, including mud shale, carbonaceous mudstone and coal bed which are in the medium-high evolution stage and produce mainly gas and the gas generation intensity is high. Through the analysis of the subsidence evolution processes of the Carboniferous-Permian Systems (transitional marine-continental facies) in the Ordos Basin and the Triassic Xujiahe Formation (continental facies) in the Sichuan Basin, it is concluded that the widely distributed sandbodies of delta facies, although with tight properties, are interbedded with source rocks and easy to accumulate natural gases. The natural gas is migrated and accumulated within small distance, and is characterized by large-area accumulation. Because of the strong hydrocarbon generation capacity, big thickness and stable distribution of the underlying mud shale, the potential of gas resources should not be underestimated. The geocyclicity of China's continental sedimentary basins controls the sedimentary association of alternated mudstones and tight sandstones, resulting in superimposed accumulations of

  7. The Coupled Effect of Loading Rate and Grain Size on Tensile Strength of Sandstones under Dynamic Disturbance

    Directory of Open Access Journals (Sweden)

    Miao Yu

    2017-01-01

    Full Text Available It is of significance to comprehend the effects of rock microstructure on the tensile strength under different loading rates caused by mining disturbance. So, in this paper, three kinds of sandstones drilled from surrounding rocks in Xiao Jihan Coal to simulate the in situ stress state, whose average grain size is 30 μm (fine grain, FG, 105 μm (medium grain, MG, and 231 μm (Coarse grain, CG, are selected with the calculation of optical microscopic technique and moreover processed to Brazilian disc (BD to study the mechanical response of samples. The dynamic Brazilian tests of samples with three kinds of grain sizes are conducted with the Split Hopkinson Pressure Bar (SHPB driven by pendulum hammer, which can produce four different velocities (V=2.0 m/s, 2.5 m/s, 3.3 m/s, and 4.2 m/s when the incident bar is impacted by pendulum hammer. The incident wave produced by pendulum hammer is a slowly rising stress wave, which allows gradual stress accumulation in the specimen and maintains the load at both ends of the specimen in an equilibrium state. The results show that the dynamic strength of three kinds of BD samples represented loading rates dependence, and FG sandstones are more sensitive for loading rates than MG and CG samples. Moreover, the peak strength is observed to increase linearly with an increasing stress rates, and the relationship between the dynamic BD strength and stress rates can be built through a linear equation. Finally, the failure modes of different grain sizes are discussed and explained by microfailure mechanism.

  8. Characterization of a fluvial aquifer at a range of depths and scales: the Triassic St Bees Sandstone Formation, Cumbria, UK

    Science.gov (United States)

    Medici, Giacomo; West, L. J.; Mountney, N. P.

    2017-11-01

    Fluvial sedimentary successions represent porous media that host groundwater and geothermal resources. Additionally, they overlie crystalline rocks hosting nuclear waste repositories in rift settings. The permeability characteristics of an arenaceous fluvial succession, the Triassic St Bees Sandstone Formation in England (UK), are described, from core-plug to well-test scale up to 1 km depth. Within such lithified successions, dissolution associated with the circulation of meteoric water results in increased permeability (K 10-1-100 m/day) to depths of at least 150 m below ground level (BGL) in aquifer systems that are subject to rapid groundwater circulation. Thus, contaminant transport is likely to occur at relatively high rates. In a deeper investigation (> 150 m depth), where the aquifer has not been subjected to rapid groundwater circulation, well-test-scale hydraulic conductivity is lower, decreasing from K 10-2 m/day at 150-400 m BGL to 10-3 m/day down-dip at 1 km BGL, where the pore fluid is hypersaline. Here, pore-scale permeability becomes progressively dominant with increasing lithostatic load. Notably, this work investigates a sandstone aquifer of fluvial origin at investigation depths consistent with highly enthalpy geothermal reservoirs ( 0.7-1.1 km). At such depths, intergranular flow dominates in unfaulted areas with only minor contribution by bedding plane fractures. However, extensional faults represent preferential flow pathways, due to presence of high connective open fractures. Therefore, such faults may (1) drive nuclear waste contaminants towards the highly permeable shallow (< 150 m BGL) zone of the aquifer, and (2) influence fluid recovery in geothermal fields.

  9. The depositional environment and petrology of the White Rim Sandstone Member of the Permian Cutler Formation, Canyonlands National Park, Utah

    Science.gov (United States)

    Steele-Mallory, B. A.

    1982-01-01

    The White Rim Sandstone Member of the Cutler Formation of Permian age in Canyonlands National Park, Utah, was deposited in coastal eolian and associated interdune environments. This conclusion is based on stratigraphic relationships primary sedimentary structures, and petrologic features. The White Rim consists of two major genetic units. The first represents a coastal dune field and the second represents related interdune ponds. Distinctive sedimentary structures of the coastal dune unit include large- to medium-scale, unidirectional, tabular-planar cross-bedding; high-index ripples oriented parallel to dip direction of the foresets; coarse-grained lag layers; avalanche or slump marks; and raindrop impressions. Cross-bedding measurements suggest the dunes were deposited as transverse ridges by a dominantly northwest to southeast wind. Distinctive sedimentary structures of the interdune pond unit include wavy, horizontally laminated bedding, adhesion ripples, and desiccation polygons. These features may have been produced by alternate wetting and drying of sediment during water-table fluctuations. Evidence of bioturbation is also present in this unit. Petrologic characteristics of the White Rim helped to define the depositional environment as coastal. A crinoid fragment was identified at one location; both units are enriched in heavy minerals, and small amounts of well rounded, reworked glauconite were found in the White Rim throughout the study area. Earlier work indicates that the White Rim sandstone is late Wolfcampian to early Leonardian in age. During this time, the Canyonlands area was located in a depositional area alternately dominated by marine and nonmarine environments. Results of this study suggest the White Rim represents a coastal dune field that was deposited by predominantly on-shore winds during a period of marine transgression.

  10. Testing the process of drilling - analysis of drilling performance in variegated sandstone and Keuper in Northern Germany; Der Bohrprozess auf dem Pruefstand - Analyse der Bohrleistungen im Buntsandstein und Keuper in Norddeutschland

    Energy Technology Data Exchange (ETDEWEB)

    Pust, G.; Tschaffler, H. [Mobil Erdgas Erdoel GmbH, Celle (Germany); Grunwald, R. [BEB Erdgas und Erdoel GmbH, Nienhagen (Germany); Gloth, H. [TU Bergakademie Freiberg (Germany); Marx, C. [ITE, Clausthal-Zellerfeld (Germany)

    1998-12-31

    The aim of the project launched jointly by DGMK and 5 companies from the German oil- and gas industry and two institutes for drilling technologies was to find suitable ways in which the drilling progress in formations with bad drilling conditions in Northern Germany, i.e. lower and middle variegated sandstone and Keuper can be increases in order to bring costs down. The borehole sunk in Northern Germany were surveyed and inventorised. Data were subjected to a thorough statistical analysis in order to obtain optimal drilling parameters and improve the drilling tools. Basic studies on rock damaging were also to be included in order to better understand the processes. Finally, the project aims at realising the optimal drilling parameters, increase drilling progress, use improved drilling machinery and thus cut costs. (orig.) [Deutsch] Ziel des DGMK-Gemeinschaftsprojektes mit 5 Firmen der deutschen Erdoel- und Erdgasindustrie sowie 2 bohrtechnischen Instituten war es, durch geeignete Massnahmen den Bohrfortschritt in schlechtbohrbaren Formationen in Norddeutschland, naemlich unterer und mittlerer Buntsandstein sowie Keuper, zu erhoehen und damit einen Beitrag zur Kostensenkung zu leisten. Um dieses Ziel zu erreichen, sollte eine Bestandsaufnahme der in Norddeutschland abgeteuften Bohrungen erfolgen. Die Daten sollten einer eingehenden statistischen Auswertung unterzogen werden. Hieraus sollten optimale Bohrparameter und Verbesserungen der Bohrwerkzeuge abgeleitet werden. Ferner sollten grundlegende Untersuchungen zur Gesteinszerstoerung herangezogen werden, um ein besseres Verstaendnis fuer die ablaufenden Prozesse zu bekommen. Durch die Realisierung optimaler Bohrparameter und den Einsatz verbesserter Bohrwerkszeuge sollte schliesslich die Erhoehung des Bohrfortschritts und damit eine Senkung der Kosten erreicht werden. (orig.)

  11. Geochemistry of sandstones and shales from the Ecca Group, Karoo Supergroup, in the Eastern Cape Province of South Africa: Implications for provenance, weathering and tectonic setting

    Science.gov (United States)

    Baiyegunhi, Christopher; Liu, Kuiwu; Gwavava, Oswald

    2017-08-01

    Geochemical compositions of twenty-four sandstone and shale samples from the Ecca Group were analysed to decipher their provenance, paleoweathering conditions and tectonic setting. The shales have high Fe2O3, K2O, TiO2, Ce, Cu, Ga, La, Nb, Nd, Rb, Sc, Sr, Th and Y content more than the sandstones, whereas, sandstones are higher in SiO2, Hf and Zr than the shales. The positive correlations of Al2O3 with other elements as well as the abundance of Ba, Ce, Th, Rb, Zn and Zr suggest that these elements are primarily controlled by the dominant clay minerals. Tectonic discrimination diagrams revealed that the sandstones and shales are mostly of quartzose sedimentary provenance, suggesting that they were derived from a cratonic interior or recycled orogen. The binary plots of TiO2 versus Ni, TiO2 against Zr and La/Th versus Hf as well as the ternary diagrams of V-Ni-Th*10 indicate that the shales and sandstones were derived from felsic igneous rocks. A-CN-K (Al2O3-CaO-K2O) ternary diagram and indices of weathering (CIA, CIW and PIS) suggest that the granitic source rocks underwent moderate to high degree of chemical weathering. The CIA values range between 24.41% and 83.76%, indicating low to high weathering conditions. The CIW values for the studied sandstones and shales range from 25.90 to 96.25%, suggesting moderate to high intensive chemical weathering. ICV values for the sandstones and shales vary from 0.71 to 3.6 (averaging 1.20) and 0.41 to 1.05 (averaging 0.82), respectively. The k2O/Na2O ratios for the studied samples vary from 0.71 to 8.29, which reveal moderate to high maturity. The plot of CIA against ICV shows that most of the shales are geochemically mature and were derived from both weak and intensively weathered source rocks. The tectonic setting discrimination diagrams support passive-active continental margin setting of the provenance.

  12. Sedimentology and reservoir heterogeneity of a valley-fill deposit-A field guide to the Dakota Sandstone of the San Rafael Swell, Utah

    Science.gov (United States)

    Kirschbaum, Mark A.; Schenk, Christopher J.

    2010-01-01

    Valley-fill deposits form a significant class of hydrocarbon reservoirs in many basins of the world. Maximizing recovery of fluids from these reservoirs requires an understanding of the scales of fluid-flow heterogeneity present within the valley-fill system. The Upper Cretaceous Dakota Sandstone in the San Rafael Swell, Utah contains well exposed, relatively accessible outcrops that allow a unique view of the external geometry and internal complexity of a set of rocks interpreted to be deposits of an incised valley fill. These units can be traced on outcrop for tens of miles, and individual sandstone bodies are exposed in three dimensions because of modern erosion in side canyons in a semiarid setting and by exhumation of the overlying, easily erodible Mancos Shale. The Dakota consists of two major units: (1) a lower amalgamated sandstone facies dominated by large-scale cross stratification with several individual sandstone bodies ranging in thickness from 8 to 28 feet, ranging in width from 115 to 150 feet, and having lengths as much as 5,000 feet, and (2) an upper facies composed of numerous mud-encased lenticular sandstones, dominated by ripple-scale lamination, in bedsets ranging in thickness from 5 to 12 feet. The lower facies is interpreted to be fluvial, probably of mainly braided stream origin that exhibits multiple incisions amalgamated into a complex sandstone body. The upper facies has lower energy, probably anastomosed channels encased within alluvial and coastal-plain floodplain sediments. The Dakota valley-fill complex has multiple scales of heterogeneity that could affect fluid flow in similar oil and gas subsurface reservoirs. The largest scale heterogeneity is at the formation level, where the valley-fill complex is sealed within overlying and underlying units. Within the valley-fill complex, there are heterogeneities between individual sandstone bodies, and at the smallest scale, internal heterogeneities within the bodies themselves. These

  13. Effect of pore structure on the seepage characteristics of tight sandstone reservoirs: A case study of Upper Jurassic Penglaizhen Fm reservoirs in the western Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Liqiang Sima

    2017-01-01

    Full Text Available Tight sandstone reservoirs are characterized by complex pore structures and strong heterogeneity, and their seepage characteristics are much different from those of conventional sandstone reservoirs. In this paper, the tight sandstone reservoirs of Upper Jurassic Penglaizhen Fm in western Sichuan Basin were analyzed in terms of their pore structures by using the data about physical property, mercury injection and nuclear magnetic resonance (NMR tests. Then, the seepage characteristics and the gas–water two-phase migration mechanisms and distribution of tight sandstone reservoirs with different types of pore structures in the process of hydrocarbon accumulation and development were simulated by combining the relative permeability experiment with the visual microscopic displacement model. It is shown that crotch-like viscous fingering occurs in the process of gas front advancing in reservoirs with different pore structures. The better the pore structure is, the lower the irreducible water saturation is; the higher the gas-phase relative permeability of irreducible water is, the more easily the gas reservoir can be developed. At the late stage of development, the residual gas is sealed in reservoirs in the forms of bypass, cutoff and dead end. In various reservoirs, the interference between gas and water is stronger, so gas and water tends to be produced simultaneously. The sealed gas may reduce the production rate of gas wells significantly, and the existence of water phase may reduce the gas permeability greatly; consequently, the water-bearing low-permeability tight sandstone gas reservoirs reveal serious water production, highly-difficult development and low-recovery percentage at the late stage, which have adverse impacts on the effective production and development of gas wells.

  14. Storm-influenced deltaic deposits of the Middle Jurassic Gaikema Sandstone in a measured section on the northern Iniskin Peninsula, Cook Inlet basin, Alaska

    Science.gov (United States)

    Stanley, Richard G.; Helmold, Kenneth P.; LePain, David L.

    2015-01-01

    Middle Jurassic strata of the Gaikema Sandstone were deposited about 170 million years ago on a delta that was located on the western shoreline of the Cook Inlet basin (Detterman and Hartsock, 1966; LePain and others, 2011, 2013). The delta was built by swift, sediment-laden rivers that flowed southeastward from a mountainous volcanic terrane west of the Bruin Bay fault (fig. 6-1). Upon reaching the edge of the Jurassic sea, the rivers dumped abundant sand, gravel, and mud into a depocenter on the northern Iniskin Peninsula, about 240 km southwest of Anchorage (figs. 6-1, 6-2). This report provides a preliminary description and interpretation of a detailed, 34-m-thick measured section in the Gaikema Sandstone on the south shore of Chinitna Bay at latitude 59.816°N, longitude 153.168°W (figs. 6-1–6-3). The sandstone in this measured section exhibits hummocky cross lamination and other features suggestive of storm-influenced deposition on the shallow-marine, seaward margin of the Gaikema delta. Our field studies of the Gaikema Sandstone were conducted during 2013 and 2014 as part of a collaborative effort by the Alaska Division of Geological & Geophysical Surveys (DGGS), Alaska Division of Oil and Gas (DOG), and U.S. Geological Survey (USGS) to provide the public with reliable information on the geologic framework and petroleum resource potential of Cook Inlet basin (Gillis, 2013, 2014). Jurassic rocks in Cook Inlet, including the Gaikema Sandstone, are of economic interest because they could contain significant undiscovered petroleum resources (Bureau of Ocean Energy Management, 2011; Stanley and others, 2011a, 2011b, 2013a; LePain and others, 2013).

  15. Reconnaissance of the hydrology of sandstone and limestone aquifers along the northwest flank of the Little Rocky Mountains, Fort Belknap Indian Reservation, north-central Montana

    Science.gov (United States)

    Slagle, S.E.; Christensen, P.K.

    1993-01-01

    The geohydrology of aquifers was studied the south- western part of the Fort Belknap Indian Reservation in north-central Montana. The geologic units of interest are the Lodgepole Limestone, principally composed of thin-bedded limestone; the Mission Canyon Limestone, a massive limestone containing numerous solution cavities; the lower part of the Kootenai Formation, composed of sandstone; a sands- stone unit at the base of the Colorado Group; and the Virgelle Sandstone Member at the base of the Eagle Sandstone. These units were formed during Early Mississippian through Late Cretaceous time and have been subjected to uplift, folding, and the intrusion of the igneous core of Little Rocky Mountains. Dips of these units range from nearly vertical to about 10 degrees. Thirty-one test holes were drilled and 25 of the holes were completed as monitoring wells. Water-level fluctuations in most aquifers followed a seasonal pattern with the lowest levels occurring in the fall and winter and highest levels in the spring and summer. Seasonal fluctuations ranged from about 0.6 to 21 feet. Specific capacity of wells tested ranged from 0.02 gallon per minute per foot for a well completed in the Eagle Sandstone to 4.6 gallons per minute per foot for a well completed in the Mission Canyon Limestone. Eight aquifer tests indicated transmissivity values of 15 to 1,000 feet squared per day. Dissolved-solids concentration in water collected from 22 wells ranged from 263 to 1,930 milligrams per liter. The least mineralized water was obtained from the Mission Canyon Limestone and the most mineralized from the Eagle Sandstone.

  16. Effect of CH4 on the CO2 breakthrough pressure and permeability of partially saturated low-permeability sandstone in the Ordos Basin, China

    Science.gov (United States)

    Zhao, Yan; Yu, Qingchun

    2018-01-01

    The behavior of CO2 that coexists with CH4 and the effect of CH4 on the CO2 stream need to be deeply analyzed and studied, especially in the presence of water. Our previous studies investigated the breakthrough pressure and permeability of pure CO2 in five partially saturated low-permeability sandstone core samples from the Ordos Basin, and we concluded that rocks with a small pore size and low permeability show considerable sealing capacity even under unsaturated conditions. In this paper, we selected three of these samples for CO2-CH4 gas-mixture breakthrough experiments under various degrees of water saturation. The breakthrough experiments were performed by increasing the gas pressure step by step until breakthrough occurred. Then, the effluent gas mixture was collected for chromatographic partitioning analysis. The results indicate that CH4 significantly affects the breakthrough pressure and permeability of CO2. The presence of CH4 in the gas mixture increases the interfacial tension and, thus, the breakthrough pressure. Therefore, the injected gas mixture that contains the highest (lowest) mole fraction of CH4 results in the largest (smallest) breakthrough pressure. The permeability of the gas mixture is greater than that for pure CO2 because of CH4, and the effective permeability decreases with increased breakthrough pressure. Chromatographic partitioning of the effluent mixture gases indicates that CH4 breaks through ahead of CO2 as a result of its weaker solubility in water. Correlations are established between (1) the breakthrough pressure and water saturation, (2) the effective permeability and water saturation, (3) the breakthrough pressure and effective permeability, and (4) the mole fraction of CO2/CH4 in the effluent mixture gases and water saturation. These results deepen our understanding of the multi-phase flow behavior in the porous media under unsaturated conditions, which have implications for formulating emergency response plans for gas

  17. New geochronologic and stratigraphic evidence confirms the paleocene age of the dinosaur-bearing ojo alamo sandstone and animas formation in the San Juan Basin, New Mexico and Colorado

    Science.gov (United States)

    Fassett, J.E.

    2009-01-01

    Dinosaur fossils are present in the Paleocene Ojo Alamo Sandstone and Animas Formation in the San Juan Basin, New Mexico, and Colorado. Evidence for the Paleo-cene age of the Ojo Alamo Sandstone includes palynologic and paleomagnetic data. Palynologic data indicate that the entire Ojo Alamo Sandstone, including the lower dinosaur-bearing part, is Paleocene in age. All of the palynomorph-productive rock samples collected from the Ojo Alamo Sandstone at multiple localities lacked Creta-ceous index palynomorphs (except for rare, reworked specimens) and produced Paleocene index palynomorphs. Paleocene palynomorphs have been identified strati-graphically below dinosaur fossils at two separate localities in the Ojo Alamo Sand-stone in the central and southern parts of the basin. The Animas Formation in the Colorado part of the basin also contains dinosaur fossils, and its Paleocene age has been established based on fossil leaves and palynology. Magnetostratigraphy provides independent evidence for the Paleocene age of the Ojo Alamo Sandstone and its dinosaur-bearing beds. Normal-polarity magnetochron C29n (early Paleocene) has been identified in the Ojo Alamo Sandstone at six localities in the southern part of the San Juan Basin. An assemblage of 34 skeletal elements from a single hadrosaur, found in the Ojo Alamo Sandstone in the southern San Juan Basin, provided conclusive evidence that this assemblage could not have been reworked from underlying Cretaceous strata. In addition, geochemical studies of 15 vertebrate bones from the Paleocene Ojo Alamo Sandstone and 15 bone samples from the underlying Kirtland Formation of Late Creta-ceous (Campanian) age show that each sample suite contained distinctly different abundances of uranium and rare-earth elements, indicating that the bones were miner-alized in place soon after burial, and that none of the Paleocene dinosaur bones ana-lyzed had been reworked. ?? U.S. Geological Survey, Public Domain April 2009.

  18. Evaluation of consolidating and water repellent treatments applied to the miocene sandstone used in Tunisian Heritage Monuments

    Directory of Open Access Journals (Sweden)

    Zoghlami, K.

    2005-03-01

    Full Text Available Summary The research reported in the present paper focused on the behaviour of the Miocene sandstone used to build the Roman aqueduct at Zaghouan-Carthage and other Tunisian Heritage monuments, after application of water repellent and consolidating treatments as a preliminary to restoration. Commercial consolidants and water repellents were used in the experiments: two ethyl silicate consolidants, Tegovakon (TV and Keim-Silex OH (KSOH; two (siloxane water repellents, Tegosivin THE 328 (THE and Tegosivin HLJ00 (THE; and a dual (consolidate and water repellent action substance, Keim- Silex H (KSH (silicate acid ester base with siloxane. A mixed treatment consisting of successive coats of TV and THL (TVHL was also applied. These organosilicate consolidants and water repellents acted on the porous structure of the sandstone, reducing total porosity and water vapour permeability. The water repellent THE was found to affect these properties least, with a pore size distribution that resembled the distribution in the untreated sandstone most closely. Water repellents diminish water absorption and consolidants increase mechanical strength. The TV-THL mix, which yielded results similar to those obtained with water repellents alone, was unable to prevent the substantial scaling that occurs during (RILEM salt crystallisation-induced artificial ageing. The best results were found with the dual action consolidant! water repellent product (KSH, which improved the mechanical properties while affording protection from the decay caused by salts in artificial ageing trials. This substance was found to reduce water vapour permeability, however

    Esta investigación se centra en la evaluación del comportamiento de la arenisca miocénica utilizada en el acueducto de Zaghouan-Cartago y otros monumentos del Patrimonio Monumental de Túnez tras la aplicación de tratamientos de hidrofugación y de consolidación. Para los tratamientos se han seleccionado productos

  19. Geochemical interpretation of the Precambrian basement and overlying Cambrian sandstone on Bornholm, Denmark: Implications for the weathering history

    Science.gov (United States)

    Zhou, Lingli; Friis, Henrik; Yang, Tian; Nielsen, Arne Thorshøj

    2017-08-01

    A geochemical study of the Precambrian basement granites from the Borggård borehole on Bornholm, Denmark, suggests that the granites were moderately weathered (Chemical Index of Alteration-CIA = 66-71) during subaerial exposure in a humid climate. The microcline is well preserved, whereas plagioclase was thoroughly altered to clay minerals (Plagioclase Index of Alteration-PIA = 93-99) which is likely due to its original Ca-rich composition. The primary Fe-Ti accessory minerals were oxidized to hematite and anatase. Evidence from REE distribution patterns and immobile element ratios, e.g. Zr/Hf and Nb/Ta, between the weathered basement granite from the Borggård borehole and regional granitoids on Bornholm, constrains the Svaneke Granite as the original basement lithology. A tau (τ) mass transport model (assuming immobile Ti) was applied to quantify the mass transfer during weathering of the basement granite. The results show a depletion of major elements in the following order: Na > Ca > Mg > Si; Al and Ti are immobile and stay constant; K shows sample dependent enrichment or depletion; Fe is slightly enriched. The Cambrian sandstone overlying the basement in the Borggård borehole, assigned to the Gadeby Member of the Nexø Formation, is feldspathic litharenite-litharenite in composition. Provenance indicators including (Gd/Yb)N, Zr/Hf and Nb/Ta ratios and petrological features indicate that source material was derived from both weathered and fresh basement granite of intermediate composition. The Gadeby Member equivalents in Germany, the basal lower Cambrian Adlergrund Konglomerat Member (AKM) in the offshore G-14 well north of Rügen, and the approximately coeval Lubmin Sandstein Formation (LSF) from the Loissin-1 borehole, mainland Germany, must have been sourced from a basement with compositions comparable to the intermediate group of the regional granitoids on Bornholm. The source materials for the AKM (CIA = 71-72, PIA = 94-96), the Gadeby Member in the

  20. Petrophysical characteristics of the sandstones used in the construction of the Monumental Heritage of Ciudad Rodrigo, Salamanca. Spain

    Directory of Open Access Journals (Sweden)

    Varas, M. J.

    2003-03-01

    Full Text Available Knowledge of the petrophysical characteristics of stones used in construction is evidently advantageous in the sense that it can help avoid wasting time and future disappointments when attempting to assess the results both in restoration work and in actual construction work. However, if the material used is sandstone, as in the case addressed here, such knowledge is even more pertinent since such materials are soft and porous. Here we offer an exhaustive study of the petrophysical characteristics of the sandstones used in the construction of the Monumental Heritage of Ciudad Rodrigo (Salamanca, Spain. Five different types of stone were used; namely, the Red, Brown, Striped, Nodular and White, varieties. The differences among these varieties lie in the degree of diagenetic transformation they have undergone. Each of them has important mineralogical, textural and structural differences as compared with its counterparts, implying that each variety will behave differently when used for construction purposes. The Red variety is the least transformed and hence the least suitable for construction. By contrast, the White is the variety that has undergone the greatest degree of diagenesis and is hence the most appropriate for such purposes.

    El conocimiento de las características petrofísicas de las piedras con las que se va a trabajar, supone ahorrar esfuerzos y futuros disgustos a la hora de valorar los resultados tanto en las propias intervenciones de restauración como en la edificación. Pero si además, estas piedras son areniscas, como es nuestro caso, este conocimiento es mucho más necesario, por tratarse de materiales pétreos blandos y porosos. En el presente trabajo se hace un exhaustivo estudio de las propiedades petrofísicas que presentan las areniscas utilizadas en la construcción del Conjunto Monumental de Ciudad Rodrigo (Salamanca. Se han empleado cinco variedades distintas de arenisca: Roja, Marrón, Rayada, Nodular y Blanca

  1. Imaging Sand Bars using 3D GPR in an Outcrop Reservoir Analog: Cretaceous Ferron Sandstone, South-East Utah

    Science.gov (United States)

    Aziz, A. S.; Stewart, R. R.; Ullah, M. S.; Bhattacharya, J.

    2015-12-01

    Outcrop analog studies provide crucial information on geometry and facies patterns to improve the understanding of the complex subsurface reservoir architecture for enhanced oil recovery (EOR) planning during field development. Ground-penetrating radar (GPR) has greatly facilitated analog outcrop study progress by bridging the gap in image resolution between seismic and well data. A 3D GPR survey was conducted to visualize architectural elements of friction-dominated distributary mouth bars within proximal delta front deposits in Cretaceous Ferron Sandstone at the top of the Notom Delta in south-east Utah. Sensors and Software's Noggin 250 MHz system was used over a 25 m x 15 m grid. We employed a spatial sampling of 0.5 m for the inline (dip direction) and 1.5 m for the crossline (strike direction). Standard processing flows including time-zero correction, dewow, gain, background subtraction and 2D migration were used to increase the signal-to-noise ratio. Formation velocity estimates from the hyperbola matching yielded 0.131 m/ns which is comparable to the literature velocity of about 0.125 m/ns. The calculated average dielectric constant (directly related to volumetric water content) is 5.2 matches unsaturated sandstone. The depth of GPR penetration is limited to approximately 3 m - likely due to the compaction/carbonate cementation in the rock and interbedded layers of finer-grained material contributing to higher attenuation of the GPR signal. The vertical resolution is about 0.125 m, enabling the imaging of the dune-scale cross sets (15-20 cm thickness). Calculation of the medium porosity via an adapted Wyllie Time Average equation yields 7.8 % which is consistent with the average porosity (5-10%) obtained from the literature. Bedding diagrams from local cliff exposures in the previous studies show gently NE dipping accretion of single large foresets that were interpreted as small-scale unit bars, the amalgamation of which resulted in the progradation of

  2. A study of the heavy mineral suite of the sandstones of the Ecca Group of the Karoo Supergroup

    Science.gov (United States)

    Diskin, Sorcha; Coetzee, Stephan; Wendorff, Marek; Lethsolo, Maatle

    2010-05-01

    The Karoo Supergroup comprises successions of sedimentary and volcanic rocks spread across southern Africa. In neighbouring South Africa and Namibia these rocks are well exposed and the lithostratigraphy is well constrained by the fossil record, whereas in Botswana the succession is largely covered by the Kalahari sands. Analysis of detrital minerals using SEM techniques has proven very useful in determining provenance. Here we present the preliminary conclusions of a study of the heavy mineral suite of the sandstones of the Ecca Group of the Karoo Supergroup using .SEM - EDAX along with standard SEM microscopy to investigate the provenance and comment on the likely source rock. Samples were taken from a borehole (10181C, Kang, Central Botswana) and the heavy mineral fraction was separated using standard preparation techniques; analyses were conducted on a Philips XL30 ESEM equipped with an EDAX EDS system. SEM-EDAX results show a progression in garnet composition down hole to include more pyrope rich garnets, which is indicative of derivation from a sediment source evolving from a region of higher to lower grade metamorphism. There are also some more grossular garnets present, potentially indicating a minor igneous component. Grain morphology was noted to remain similar regardless of grain size. Garnets here are quite broken indicating relatively short transport path/time, however some show rounding which may be due to dissolution. Examination of larger grains using SEM indicated that many were not monomineralic and in fact formed a type of breccia. These breccias comprise a range of minerals including rutile and staurolite. Some of the material appears to be a titanian pyrope (garnet), this is significant as these types of garnet are particularly associated with kimberlites, suggesting that these very high grade metamorphic rocks are a potential source for the sediment. Detrital feldspars overgrown with barite were also noted. The barites are particularly

  3. CO{sub 2}-induced mechanical behaviour of Hawkesbury sandstone in the Gosford basin: An experimental study

    Energy Technology Data Exchange (ETDEWEB)

    Rathnaweera, T.D. [Department of Civil Engineering, Monash University, Building 60, Melbourne, Victoria 3800 (Australia); Ranjith, P.G., E-mail: ranjith.pg@monash.edu [Department of Civil Engineering, Monash University, Building 60, Melbourne, Victoria 3800 (Australia); Perera, M.S.A.; Haque, A. [Department of Civil Engineering, Monash University, Building 60, Melbourne, Victoria 3800 (Australia); Lashin, A. [King Saud University, College of Engineering-Petroleum and Natural Gas Engineering Department, P.O. Box 800, Riyadh 11421, Saudi Arabia. (Saudi Arabia); Benha University, Faculty of Science-Geology Department, P.O. Box 13518, Benha (Egypt); Al Arifi, N. [King Saud University, College of Science-Geology and Geophysics Department, P.O. Box 2455, Riyadh 11451, Saudi Arabia. (Saudi Arabia); Chandrasekharam, D [King Saud University, College of Science-Geology and Geophysics Department, P.O. Box 2455, Riyadh 11451, Saudi Arabia. (Saudi Arabia); Department of Earth Sciences, Indian Institute of Technology Bombay, 400076 India (India); Yang, SQ [Department of Civil Engineering, Monash University, Building 60, Melbourne, Victoria 3800 (Australia); State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116 (China); Xu, T; Wang, SH [Center for Rock Instability & Seismicity Research, Northeastern University, Shenyang 110819 (China); Yasar, E [Iskenderun Technical University, Faculty of Mechanical Engineering, Dept. of Petroleum & Natural Gas Engineering, 31200 (Turkey)

    2015-08-12

    Carbon dioxide (CO{sub 2}) sequestered in saline aquifers undergoes a variety of chemically-coupled mechanical effects, which may cause CO{sub 2}-induced mechanical changes and time-dependent reservoir deformation. This paper investigates the mineralogical and microstructural changes that occur in reservoir rocks following injection of CO{sub 2} in deep saline aquifers and the manner in which these changes influence the mechanical properties of the reservoir rocks. In this study, cylindrical sandstone specimens, 38 mm in diameter and 76 mm high, obtained from the Gosford basin, were used to perform a series of unconfined compressive strength (UCS) tests. Different saturation conditions: dry, water- and brine-saturated sandstone samples with and without scCO{sub 2} (super-critical carbon dioxide) injection, were considered in the study to obtain a comprehensive understanding of the impact of scCO{sub 2} injection during the CO{sub 2} sequestration process on saline aquifer mechanical properties. An acoustic emission (AE) system was employed to identify the stress threshold values of crack closure, crack initiation and crack damage for each testing condition during the whole deformation process of the specimens. Finally, scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray fluorescence (XRF) analyses were performed to evaluate the chemical and mineralogical changes that occur in reservoir rocks during CO{sub 2} injection. From the test results, it is clear that the CO{sub 2}-saturated samples possessed a lower peak strength compared to non-CO{sub 2} saturated samples. According to SEM, XRD and XRF analyses, considerable quartz mineral corrosion and dissolution of calcite and siderite were observed during the interactions of the CO{sub 2}/water/rock and CO{sub 2}/brine/rock systems, which implies that mineralogical and geochemical rock alterations affect rock mechanical properties by accelerating the collapse mechanisms of the pore matrix. AE results

  4. Projects Work!

    Science.gov (United States)

    Textor, Martin R.

    2005-01-01

    The great educational value of projects is emphasized by contrasting negative aspects of the life of today's children with the goals of project work. This is illustrated by a project "Shopping." It is shown what children are learning in such projects and what the advantages of project work are. Relevant topic areas, criteria for selecting a…

  5. Radon-222 content of natural gas samples from Upper and Middle Devonian sandstone and shale reservoirs in Pennsylvania—preliminary data

    Science.gov (United States)

    Rowan, E.L.; Kraemer, T.F.

    2012-01-01

    Samples of natural gas were collected as part of a study of formation water chemistry in oil and gas reservoirs in the Appalachian Basin. Nineteen samples (plus two duplicates) were collected from 11 wells producing gas from Upper Devonian sandstones and the Middle Devonian Marcellus Shale in Pennsylvania. The samples were collected from valves located between the wellhead and the gas-water separator. Analyses of the radon content of the gas indicated 222Rn (radon-222) activities ranging from 1 to 79 picocuries per liter (pCi/L) with an overall median of 37 pCi/L. The radon activities of the Upper Devonian sandstone samples overlap to a large degree with the activities of the Marcellus Shale samples.

  6. Rock core-based pre-stress evaluation experimental validation: A case study on Yutengping Sandstone as CO2 storage reservoir rock

    Directory of Open Access Journals (Sweden)

    Jian-Hong Wu

    2017-01-01

    Full Text Available Yutengping Sandstone in Tieh-chan-shan, Taiwan is a potential reservoir for geological CO2 storage. Cyclic loadings were applied to rock samples taken from an outcrop to create artificial pre-stress. The pre-stress evaluation accuracies using two core-based techniques, acoustic emission (AE and deformation rate analysis (DRA, were investigated under different pre-stresses, delay times and curing temperatures. The experimental results validate the pre-stress evaluations using AE and DRA. The delay time and curing temperature were shown to have minor impacts on the measurement accuracy. However, although both axial strain and lateral strain can be used in DRA, the stress memory fades as the delay time increases. Therefore, delay time, which represents the time from the borehole drilling to the DRA test, must be carefully considered when applying these techniques to evaluate the in situ stress of Yutengping sandstone.

  7. Burial diagenetic processes of clay mineral and non-clay mineral, quartz cementation and dissolution in sandstones and mudstones of the Siri Canyon, Danish North Sea

    DEFF Research Database (Denmark)

    Kazerouni, Afsoon Moatari; Friis, Henrik; Svendsen, Johan Byskov

    grains (diatoms, radiolaria, sponge spicules), silica released from the hydration of volcanic glass, silica released detrital amorphous alumino-silicates that accumulated in muds, and decomposition of feldspars.  Silica release in shale does not necessarily source sandstone diagenesis but may...... of the biogenic silica has been transformed into opal-CT and partly to microcrystalline quartz.  The microcrystalline quartz is an internal sink for dissolved silica, but the shale may also have been an active silica exporter during this transition. With deeper burial (2000-2900m), opal-CT is fully transformed...... to microcrystalline quartz.  During this phase, silica has been partly mobile and depending on the rate of dissolution compared to the rate of precipitation, silica may have been lost to sandstone cementation.  Zeolite is also dissolved and mobilized silica may also have activated the shale as silica exporter...

  8. Transport Mechanisms for CO2-CH4 Exchange and Safe CO2 Storage in Hydrate-Bearing Sandstone

    Directory of Open Access Journals (Sweden)

    Knut Arne Birkedal

    2015-05-01

    Full Text Available CO2 injection in hydrate-bearing sediments induces methane (CH4 production while benefitting from CO2 storage, as demonstrated in both core and field scale studies. CH4 hydrates have been formed repeatedly in partially water saturated Bentheim sandstones. Magnetic Resonance Imaging (MRI and CH4 consumption from pump logs have been used to verify final CH4 hydrate saturation. Gas Chromatography (GC in combination with a Mass Flow Meter was used to quantify CH4 recovery during CO2 injection. The overall aim has been to study the impact of CO2 in fractured and non-fractured samples to determine the performance of CO2-induced CH4 hydrate production. Previous efforts focused on diffusion-driven exchange from a fracture volume. This approach was limited by gas dilution, where free and produced CH4 reduced the CO2 concentration and subsequent driving force for both diffusion and exchange. This limitation was targeted by performing experiments where CO2 was injected continuously into the spacer volume to maintain a high driving force. To evaluate the effect of diffusion length multi-fractured core samples were used, which demonstrated that length was not the dominating effect on core scale. An additional set of experiments is presented on non-fractured samples, where diffusion-limited transportation was assisted by continuous CO2 injection and CH4 displacement. Loss of permeability was addressed through binary gas (N2/CO2 injection, which regained injectivity and sustained CO2-CH4 exchange.

  9. A new lithologic classification method for tight sandstone reservoirs based on rock components and logging response characteristics

    Science.gov (United States)

    Zhou, Xueqing; Zhang, Zhansong; Zhang, Chong; Nie, Xin; Zhang, Chaomo; Zhu, Linqi

    2017-12-01

    The original lithology classification method for tight sandstone reservoirs has a low prediction accuracy and it does not accurately reflect reservoir characteristics. We propose a new method that uses thin sections, logging curves, and core physical data to classify the lithology of the Ordos Basin, China. First, the relationship between the rock components and physical properties in the study area was analyzed and we found that quartz and rock debris played an active role in the properties of the reservoir, while feldspar minerals in the reservoir had a negative effect on it. Second, we synthesized the logging response characteristics of various rock components and divided the lithology into (1) high feldspar content, low quartz content, low rock debris content, and (2) low feldspar content, high quartz content, high rock debris content, using ((quartz + rock debris)/feldspar) as an index for lithologic classification. The lithology identification model was established using a support vector machine approach with a regression accuracy of 84.62%. Applying the model to the well in the study area to distinguish the lithology, results were in good agreement with thin section data, the physical properties of the reservoir, and the production capacity. Lithology can effectively reflect reservoir characteristics and play an important guiding role in the identification of reservoirs and the evaluation of productivity.

  10. On the Modelling of Algal Biofouling Growth on Nano-TiO2 Coated and Uncoated Limestones and Sandstones

    Directory of Open Access Journals (Sweden)

    Lorenzo Graziani

    2018-02-01

    Full Text Available Algal biofouling on archaeological and historic materials, as well as in modern building façade, is a common phenomenon that occurs when microorganisms of various nature adhere to the material, forming biological stains and patinas. It can significantly deteriorate the aesthetic and even mechanical quality of historic and archaeological artifacts. Thus, predicting the colonization progress of algae on treated and untreated materials can be helpful to establish appropriate schedules and methods of maintenance. In this way, the aim of this research was to modelize the algal colonization on nano-TiO2 coated and uncoated stone surfaces, usually found in historic and archaeological artifacts, by following Avrami’s theory. Particular attention was paid on correlating the model with some properties of the substrate, like roughness and porosity. Biofouling was tested on two sandstones and three limestone with different intrinsic characteristics (porosity, roughness by means of an accelerated lab-scale test. A suspension of green alga Chlorella mirabilis and cyanobacteria Chroococcidiopsis fissurarum was used as biofouling. Digital image analysis was carried out in order to find the attachment rate and the growth of algal spots. Results show that the attachment specific rate increased linearly with time, and the assumption of a constant growth rate was acceptable. A good agreement between the simulation and the experimental results was obtained with a maximum error of 0.59%.

  11. Determination of the Representative Elementary Volume for the study of sandstones and siltstones by X-Ray microtomography

    Directory of Open Access Journals (Sweden)

    Jaquiel Salvi Fernandes

    2012-08-01

    Full Text Available X-Ray computerized microtomography (µ-CT besides providing two-dimensional images (2-D of the transversal sections of the sample, the biggest attraction of the methodology is the rendering of three-dimensional images (3-D, enabling a more real analysis of the porous structure of the rock. However, the reconstruction, visualization and analysis of such 3-D images are limited in computer terms. Thus, it is not always possible to reconstruct the images with the total size of the microtomographed sample. Therefore, this study aims at determining the Representative Elementary Volume (REV in reservoir rocks concerning their porosity. In order to collect microtomographic data from reservoir rocks, a microtomograph Skyscan model 1172 was utilized for the sandstone and siltstone samples scanning. After the analysis of the graphs obtained by REV, it was concluded that the most adequate dimensions for the reconstructed volume in each analyzed sample were approximately 1400 × 1400 × 1400 µm, which are dimensions that can easily be reconstructed, visualized and analyzed.

  12. Mapping of diagenetic processes in sandstones using imaging spectroscopy: A case study of the Utrillas Formation, Burgos, Spain

    Science.gov (United States)

    Alonso de Linaje, Virginia; Khan, Shuhab D.

    2017-05-01

    Imaging spectroscopy is applied to sandstone formation to study diagenetic processes in sedimentary deposits. The study was carried out on the upper member of the Utrillas Formation in Spain. Shortwave infrared and visible near-infrared Specim® hyperspectral cameras were used to scan near-vertical and well-exposed outcrop walls. Reflectance spectra from close-range hyperspectral imaging was compared with high-resolution laboratory spectra, hyperspectral imagining data, thin sections, and results of previous sedimentological studies to analyze geochemical variations and quantify facies and diagenetic mineral abundances. Distinctive characteristics of the absorption features of clay minerals were used to develop a kaolinite crystallinity index to identify detrital kaolinite and authigenic kaolinite in the Utrillas Formation. Results show that poorly ordered kaolinite is only present in floodplain deposits, whereas well-ordered authigenic kaolinite is related to paleochannel deposits and organic-rich irregular patches. Meteoric water flux probably induced feldspar and mica alteration, as well as authigenic clays precipitation. Contemporary microbial degradation of organic matter in the subsurface might be the cause of authigenic clay formation at the alteration areas. This study provides new data and interpretation on diagenetic alterations of the Utrillas Formation. Results of this work may have important implications in the mining industry as a methodology to evaluate mining areas of interest.

  13. Specimen aspect ratio and progressive field strain development of sandstone under uniaxial compression by three-dimensional digital image correlation

    Directory of Open Access Journals (Sweden)

    H. Munoz

    2017-08-01

    Full Text Available The complete stress–strain characteristics of sandstone specimens were investigated in a series of quasi-static monotonic uniaxial compression tests. Strain patterns development during pre- and post-peak behaviours in specimens with different aspect ratios was also examined. Peak stress, post-peak portion of stress–strain, brittleness, characteristics of progressive localisation and field strain patterns development were affected at different extents by specimen aspect ratio. Strain patterns of the rocks were obtained by applying three-dimensional (3D digital image correlation (DIC technique. Unlike conventional strain measurement using strain gauges attached to specimen, 3D DIC allowed not only measuring large strains, but more importantly, mapping the development of field strain throughout the compression test, i.e. in pre- and post-peak regimes. Field strain development in the surface of rock specimen suggests that strain starts localising progressively and develops at a lower rate in pre-peak regime. However, in post-peak regime, strains increase at different rates as local deformations take place at different extents in the vicinity and outside the localised zone. The extent of localised strains together with the rate of strain localisation is associated with the increase in rate of strength degradation. Strain localisation and local inelastic unloading outside the localised zone both feature post-peak regime.

  14. The solubilities of some major and minor element minerals in ground waters associated with a sandstone-hosted uranium deposit.

    Science.gov (United States)

    Wanty, R.B.; Chatcham, J.R.; Langmuir, D.

    1987-01-01

    Ground-water samples from 41 wells penetrating basal Oakville sandstone (Miocene) in S Texas were chemically analysed to identify chemical changes related to nearby U orebodies. The coverage included a 240 km2 area which contains several fault-related U deposits. Factors affecting the hydrochemistry include: 1) relatively high permeabilities of buried fluvial-channel sediments; 2) upwards leakage of brines along growth faults into the aquifer; 3) development of a redox interface (Eh = 0 volts) within the aquifer; and 4) the semi-arid climate. Variations in the saturation index (SI) for chemically reduced minerals of U, As, Mo, Se and for associated minerals such as pyrite outlined the position of known deposits. The SI increases towards zero as the deposits are approached from updip distances of 3-4.5 km, then decreases again downdip. The radiogenic pathfinders Ra and Rn showed very strong anomalies with ore, but diminished to background levels at short distances from ore. A strong He anomaly is deflected in the direction of ground-water flow away from the ore.-R.A.H.

  15. From Micro to Meso: an exercise in determining hydraulic conductivity of fractured sandstone cores from detailed characterization of the fractures

    Science.gov (United States)

    Baraka-Lokmane, Salima; Liedl, Rudolf

    2006-09-01

    Hydraulic conductivities of fractured sandstone bore cores of 0.1 m in diameter are calculated using detailed characterization of the fracture geometry parameters determined using a resin casting technique. The accuracy of the measurements was about 0.25-1.25 μm with the image size used. The values of the effective fracture apertures vary between 10 μm and 50 μm. For modelling purposes the samples are sectioned serially, perpendicular to the flow direction along the cylinder axis. The hydraulic conductivity of individual slices is estimated by summing the contribution of the matrix (assumed uniform) and each fracture (depending on its length and aperture). Finally, the hydraulic conductivity of the bulk sample is estimated by a harmonic average in series along the flow path. Results of this geometrical upscaling compare favourably with actual conductivity measured in hydraulic and pneumatic experiments carried out prior to sectioning. This study shows that the determination of larger-scale conductivity can be achieved, based on the evaluation of fracture geometry parameters (e.g. fracture aperture, fracture width and fracture length), measured using an optical method, at least at the laboratory scale.

  16. Implications of heterogeneous fracture distribution on reservoir quality; an analogue from the Torridon Group sandstone, Moine Thrust Belt, NW Scotland

    Science.gov (United States)

    Watkins, Hannah; Healy, David; Bond, Clare E.; Butler, Robert W. H.

    2018-03-01

    Understanding fracture network variation is fundamental in characterising fractured reservoirs. Simple relationships between fractures, stress and strain are commonly assumed in fold-thrust structures, inferring relatively homogeneous fracture patterns. In reality fractures are more complex, commonly appearing as heterogeneous networks at outcrop. We use the Achnashellach Culmination (NW Scotland) as an outcrop analogue to a folded tight sandstone reservoir in a thrust belt. We present fracture data is collected from four fold-thrust structures to determine how fracture connectivity, orientation, permeability anisotropy and fill vary at different structural positions. We use a 3D model of the field area, constructed using field observations and bedding data, and geomechanically restored using Move software, to determine how factors such as fold curvature and strain influence fracture variation. Fracture patterns in the Torridon Group are consistent and predictable in high strain forelimbs, however in low strain backlimbs fracture patterns are inconsistent. Heterogeneities in fracture connectivity and orientation in low strain regions do not correspond to fluctuations in strain or fold curvature. We infer that where strain is low, other factors such as lithology have a greater control on fracture formation. Despite unpredictable fracture attributes in low strain regions, fractured reservoir quality would be highest here because fractures in high strain forelimbs are infilled with quartz. Heterogeneities in fracture attribute data on fold backlimbs mean that fractured reservoir quality and reservoir potential is difficult to predict.

  17. The effect of ionic strength on oil adhesion in sandstone--the search for the low salinity mechanism.

    Science.gov (United States)

    Hilner, E; Andersson, M P; Hassenkam, T; Matthiesen, J; Salino, P A; Stipp, S L S

    2015-04-22

    Core flood and field tests have demonstrated that decreasing injection water salinity increases oil recovery from sandstone reservoirs. However, the microscopic mechanism behind the effect is still under debate. One hypothesis is that as salinity decreases, expansion of the electrical double layer decreases attraction between organic molecules and pore surfaces. We have developed a method that uses atomic force microscopy (AFM) in chemical force mapping (CFM) mode to explore the relationship between wettability and salinity. We functionalised AFM tips with alkanes and used them to represent tiny nonpolar oil droplets. In repeated measurements, we brought our "oil" close to the surface of sand grains taken from core plugs and we measured the adhesion between the tip and sample. Adhesion was constant in high salinity solutions but below a threshold of 5,000 to 8,000 ppm, adhesion decreased as salinity decreased, rendering the surface less oil wet. The effect was consistent, reproducible and reversible. The threshold for the onset of low salinity response fits remarkably well with observations from core plug experiments and field tests. The results demonstrate that the electric double layer force always contributes at least in part to the low salinity effect, decreasing oil wettability when salinity is low.

  18. Using sequence stratigraphic approaches in a highly tectonic area: Case study - Nubia (A) sandstone in southwestern Gulf of Suez, Egypt

    Science.gov (United States)

    Attia, Ibrahem; Helal, Iman; El Dakhakhny, Alaa; Aly, Said A.

    2017-12-01

    West Esh El Mallaha area is located west of the Hurghada shoreline. It pertains to the southwestern province of the Gulf of Suez. Nubia (A) sandstone is one of the prolific reservoirs in the western side along the Gulf of Suez area. To enhance further oil production and to develop this reservoir, it is important to gain a clear understanding of the reservoir in terms of its depositional origin. In west Esh El Mallaha area, the understanding of the depositional setting of Nubia (A) is relatively hard due to the limited number of cores. A comprehensive workflow which integrates all geological datasets (electrical logs pattern, the high resolution biostratigraphic analysis, and previous studies) which has been performed for the Nubia (A), enables to recognize different patterns of electrical logs, which are used to define the sequence stratigraphy and systems tracts for Nubia (A). The Lower Nubia (A) is characterized by fining-upward profile and well-developed coarsening-straight profile interpreted as a braided - fluvial facies (lowstand system tract). On the other hand, the upper Nubia (A) is characterized by fining-upward, coarsening-upward, and bell profile interpreted as meandering fluvial to fluvio-dominated delta (transgressive system tract). This study is an approach to build a reliable geological model, and give wide view to evaluate and develop the reservoir in the drilled areas and predict sand distribution in the undrilled areas despite the limited number of cores.

  19. Isotopically zoned carbonate cements in Early Paleozoic sandstones of the Illinois Basin: δ18O and δ13C records of burial and fluid flow

    Science.gov (United States)

    Denny, Adam C.; Kozdon, Reinhard; Kitajima, Kouki; Valley, John W.

    2017-11-01

    SEM/SIMS imaging and analysis of δ18O and δ13C in sandstones from a transect through the Illinois Basin (USA) show systematic μm-scale isotopic zonation of up to 10‰ in both carbonate and quartz cements of the middle-Ordovician St. Peter and Cambrian Mt. Simon formations. Quartz δ18O values are broadly consistent with the model of Hyodo et al. (2014), wherein burial and heating in the Illinois Basin is recorded in systematically zoned quartz overgrowths. Observations of zoned dolomite/ankerite cements indicate that they preserve a more extended record of temperature and fluid compositions than quartz, including early diagenesis before or during shallow burial, and late carbonates formed after quartz overgrowths. Many carbonate cements show innermost dolomite with δ18O values (21-25‰ VSMOW) that are too low to have formed by deposition at low temperatures from ancient seawater (δ18O > - 3‰) and most likely reflect mixing with meteoric water. A sharp increase in Fe content is commonly observed in zoned carbonate cements to be associated with a drop in δ18O and an abrupt shift in δ13C to higher or lower values. These changes are interpreted to record the passage of hot metal-rich brines through sandstone aquifers, that was associated with Mississippi-Valley Type (MVT) Pb-Zn deposits (ca. 270 Ma) of the Upper Mississippi Valley. Local variability and individual trends in δ13C are likely controlled by the sources of carbon and the degree to which carbon is sourced from adjacent carbonate units or thermal maturation of organic matter. Quartz overgrowths in sandstones provide an excellent record of conditions during burial, heating, and pressure-solution, whereas carbonate cements in sandstones preserve a more-extended record including initial pre-burial conditions and punctuated fluid flow events.

  20. Kaolinite, illite and quartz dissolution in the karstification of Paleozoic sandstones of the Furnas Formation, Paraná Basin, Southern Brazil

    Science.gov (United States)

    Melo, Mário Sérgio de; Guimarães, Gilson Burigo; Chinelatto, Adilson Luiz; Giannini, Paulo César Fonseca; Pontes, Henrique Simão; Chinelatto, Adriana Scoton Antonio; Atencio, Daniel

    2015-11-01

    Karstification processes in sandstones of the Furnas Formation, Silurian to Devonian of the Paraná Basin, have been described since the mid-twentieth century. However, some geologists still doubt the idea of true karst in sandstones. Studies carried out in the Campos Gerais region, Paraná State, Southern Brazil, aimed at investigating the nature of erosion processes in Furnas Formation and the role of the dissolution in the development of their notorious erosive features and underground cavities. These studies have led to the recognition of dissolution macro to micro features ('furnas', caves, ponds, sinks, ruiniform relief on cliffs and rocky surfaces, grain corrosion, speleothems, mineral reprecipitation and incrustation). The analysis (scanning electron microscopy, energy dispersive spectrometry and x-ray diffractometry) of sandstones and their alterites has indicated significant dissolution of clay cement along with discrete quartz grain dissolution. This mesodiagenetic cement (kaolinite and illite) is dissolved and reprecipitated as clay minerals with poorly developed crystallinity along with other minerals, such as variscite and minerals of the alunite supergroup, suggesting organic participation in the processes of dissolution and incrustation. The mineral reprecipitation usually forms centimetric speleothems, found in cavities and sheltered rocky surfaces. The cement dissolution associated with other factors (fractures, wet weather, strong hydraulic gradient, antiquity of the landforms) leads to the rock arenisation, the underground erosion and the appearance of the karst features. Carbonate rocks in the basement may locally be increasing the karst forms in the overlying Furnas Formation. The recognition of the karst character of the Furnas Formation sandstones has important implications in the management of underground water resources (increasingly exploited in the region), in the use of the unique geological heritage and in the prevention of geo

  1. Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments

    Science.gov (United States)

    Yang, Sheng-Qi; Jing, Hong-Wen; Huang, Yan-Hua; Ranjith, P. G.; Jiao, Yu-Yong

    2014-12-01

    A detailed understanding of the brittle deformation behavior of sandstone containing pre-existing flaws at elevated temperatures is a key concern in underground engineering. In this research, uniaxial compression tests were performed to evaluate the effect of high temperature treatments (300, 600 or 900 °C) on the strength, deformability and fracture coalescence behavior of a sandstone containing either a single fissure or two parallel fissures. All experiments focused on rectangular prismatic (80 × 160 × 30 mm) specimens of red sandstone. Constant strain rate experiments were performed on either: (1) specimens that contained a single 2 mm-wide fissure or (2) specimens that contained two 2 mm-wide parallel fissures. The specimens containing either one or two fissures were either left at room temperature (i.e., no heat treatment), or heat treated to 300, 600 or 900 °C prior to experimentation. The results demonstrated that, in all cases, the strength and stiffness of red sandstone was increased at 300 °C, before decreasing up to our maximum temperature of 900 °C. However, the peak strain at failure always showed an increase when the temperature was increased. The crack initiation, propagation and coalescence process were monitored during the deformation using both photographic monitoring and acoustic emission (AE) monitoring techniques. The monitoring results showed that the cracking process depended on both the fissure geometry and the heat treatment temperature. The potential mechanisms causing the differences in the mechanical behavior observed with increasing temperature are discussed, as is the influence of the single fissure and the two parallel fissures on the crack evolution process. These results are important and valuable to understand the fracture mechanism of rock engineering in deep underground mining excavations and nuclear waste depositories.

  2. OUTCROP-BASED HIGH RESOLUTION GAMMA-RAY CHARACTERIZATION OF ARSENIC-BEARING LITHOFACIES IN THE PERMIAN GARBER SANDSTONE AND WELLINGTON FORMATION, CENTRAL OKLAHOMA AQUIFER (COA). CLEVELAND COUNTY, OKLAHOMA

    Science.gov (United States)

    The COA supplies drinking water to a number of municipalities in central Oklahoma. Two major stratigraphic units in the COA, the Garber Sandstone and Wellington Formation, contain naturally occurring arsenic that exceeds government mandated drinking-water standards (EPA, 2001). ...

  3. Investigation on porosity and permeability change of Mount Simon sandstone (Knox County, IN, USA) under geological CO 2 sequestration conditions: a numerical simulation approach

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Liwei [National Energy Technology Lab. (NETL), Pittsburgh, OR (United States); Soong, Yee [National Energy Technology Lab. (NETL), Pittsburgh, OR (United States); Dilmore, Robert M. [National Energy Technology Lab. (NETL), Pittsburgh, OR (United States)

    2016-01-14

    A numerical model was developed to simulate reactive transport with porosity and permeability change of Mount Simon sandstone (samples from Knox County, IN) after 180 days of exposure to CO2-saturated brine under CO2 sequestration conditions. The model predicted formation of a high-porosity zone adjacent to the surface of the sample in contact with bulk brine, and a lower porosity zone just beyond that high-porosity zone along the path from sample/bulk brine interface to sample core. The formation of the high porosity zone was attributed to dissolution of quartz and muscovite/illite, while the formation of the lower porosity zone adjacent to the aforementioned high porosity zone was attributed to precipitation of kaolinite and feldspar. The model predicted a 40% permeability increase for the Knox sandstone sample after 180 days of exposure to CO2-saturated brine, which was consistent with laboratory-measured permeability results. Model-predicted solution chemistry results were also found to be consistent with laboratory-measured solution chemistry data. Initial porosity, initial feldspar content and the exponent n value (determined by pore structure and tortuosity) used in permeability calculations were three important factors affecting permeability evolution of sandstone samples under CO2 sequestration conditions. 1

  4. Investigation on porosity and permeability change of Mount Simon sandstone (Knox County, IN, USA) under geological CO 2 sequestration conditions: a numerical simulation approach

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Liwei [US Department of Energy, National Energy Technology Laboratory, Pittsburgh PA USA; Soong, Yee [US Department of Energy, National Energy Technology Laboratory, Pittsburgh PA USA; Dilmore, Robert M. [US Department of Energy, National Energy Technology Laboratory, Pittsburgh PA USA

    2016-01-14

    In this paper, a numerical model was developed to simulate reactive transport with porosity and permeability change of Mount Simon sandstone (samples from Knox County, IN) after 180 days of exposure to CO2-saturated brine under CO2 sequestration conditions. The model predicted formation of a high-porosity zone adjacent to the surface of the sample in contact with bulk brine, and a lower porosity zone just beyond that high-porosity zone along the path from sample/bulk brine interface to sample core. The formation of the high porosity zone was attributed to dissolution of quartz and muscovite/illite, while the formation of the lower porosity zone adjacent to the aforementioned high porosity zone was attributed to precipitation of kaolinite and feldspar. The model predicted a 40% permeability increase for the Knox sandstone sample after 180 days of exposure to CO2-saturated brine, which was consistent with laboratory-measured permeability results. Model-predicted solution chemistry results were also found to be consistent with laboratory-measured solution chemistry data. Finally, initial porosity, initial feldspar content and the exponent n value (determined by pore structure and tortuosity) used in permeability calculations were three important factors affecting permeability evolution of sandstone samples under CO2 sequestration conditions.

  5. Measuring and predicting reservoir heterogeneity in complex deposystems. The fluvial-deltaic Big Injun Sandstone in West Virginia. Final report, September 20, 1991--October 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hohn, M.E.; Patchen, D.G.; Heald, M.; Aminian, K.; Donaldson, A.; Shumaker, R.; Wilson, T.

    1994-05-01

    Non-uniform composition and permeability of a reservoir, commonly referred to as reservoir heterogeneity, is recognized as a major factor in the efficient recovery of oil during primary production and enhanced recovery operations. Heterogeneities are present at various scales and are caused by various factors, including folding and faulting, fractures, diagenesis and depositional environments. Thus, a reservoir consists of a complex flow system, or series of flow systems, dependent on lithology, sandstone genesis, and structural and thermal history. Ultimately, however, fundamental flow units are controlled by the distribution and type of depositional environments. Reservoir heterogeneity is difficult to measure and predict, especially in more complex reservoirs such as fluvial-deltaic sandstones. The Appalachian Oil and Natural Gas Research Consortium (AONGRC), a partnership of Appalachian basin state geological surveys in Kentucky, Ohio, Pennsylvania, and West Virginia, and West Virginia University, studied the Lower Mississippian Big Injun sandstone in West Virginia. The Big Injun research was multidisciplinary and designed to measure and map heterogeneity in existing fields and undrilled areas. The main goal was to develop an understanding of the reservoir sufficient to predict, in a given reservoir, optimum drilling locations versus high-risk locations for infill, outpost, or deeper-pool tests.

  6. Petrography and geochemistry of Jurassic sandstones from the Jhuran Formation of Jara dome, Kachchh basin, India: Implications for provenance and tectonic setting

    Science.gov (United States)

    Periasamy, V.; Venkateshwarlu, M.

    2017-06-01

    Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains with minor amount of K-feldspar and lithic fragments in the modal ratio of Q 89:F 7:L 4. On the basis of geochemical results, sandstones are classified into arkose, sub-litharenite, wacke and quartz arenite. The corrected CIA values indicate that the weathering at source region was moderate to intense. The distribution of major and REE elements in the samples normalized to upper continental crust (UCC) and chondrite values indicate similar pattern of UCC. The tectonic discrimination diagram based on the elemental concentrations and elemental ratios of Fe2O3 + MgO vs. TiO2, SiO2 vs. log(K2O/Na2O), Sc/Cr vs. La/Y, Th-Sc-Zr/10, La-Th-Sc plots Jhuran Formation samples in continental rift and collision settings. The plots of Ni against TiO2, La/Sc vs. Th/Co and V-Ni-Th ∗10 reveals that the sediments of Jhuran Formation were derived from felsic rock sources. Additionally, the diagram of (Gd/Yb) N against Eu/Eu ∗ suggest the post-Archean provenance as source possibly Nagar Parkar complex for the studied samples.

  7. Cross-bedding related anisotropy and its interplay with various boundary conditions in the formation and orientation of joints in an aeolian sandstone

    Science.gov (United States)

    Deng, Shang; Cilona, Antonino; Morrow, Carolyn; Mapeli, Cesar; Liu, Chun; Lockner, David; Prasad, Manika; Aydin, Atilla

    2015-08-01

    Previous research revealed that the cross-bedding related anisotropy in Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada, affects the orientation of compaction bands, also known as anti-cracks or closing mode structures. We hypothesize that cross-bedding should have a similar influence on the orientation of the opening mode joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the orientation of cross-beds and the orientation of different categories of joint sets including cross-bed package confined joints and joint zones in the Aztec Sandstone. The field data show that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. In comparison, the roughly N-S trending joint zones appear not to be influenced by the cross-beds in any significant way but frequently truncate against the dune boundaries. To characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples and determined an average P-wave anisotropy to be slightly larger than 13%. From these results, a model based on the generalized Hooke's law for anisotropic materials is used to analyze deformation of cross-bedded sandstone as a transversely isotropic material. In the analysis, the dip angle of cross-beds is assumed to be constant and the strike orientation varying from 0° to 359° in the east (x), north (y), and up (z) coordinate system. We find qualitative agreement between most of the model results and the observed field relations between cross-beds and the corresponding joint sets. The results also suggest that uniaxial extension (εzz > εxx = εyy = 0) and axisymmetric extension (εxx = εyy εzz) would amplify the influence of cross-bedding associated anisotropy on the joint orientation whereas a triaxial extension (εxx > εyy

  8. Prediction of Diagenetic Facies using Well Logs: Evidences from Upper Triassic Yanchang Formation Chang 8 Sandstones in Jiyuan Region, Ordos Basin, China

    Directory of Open Access Journals (Sweden)

    Lai Jin

    2016-05-01

    Full Text Available The eighth member of Upper Triassic Yanchang Formation (Chang 8 is the major oil reservoir unit in Jiyuan oil field, though with the high potential for oil exploration. The Chang 8 sandstones are characterized with low porosity, low permeability and strong microscopic heterogeneities due to the complex deep-burial diagenetic history. Detailed petrological studies by thin section, X-ray diffraction, scanning electron microscopy, core analysis have been used to investigate the lithogology characteristics, diagenesis, diagenetic minerals and their coupling impacts on reservoir property. The results show that Chang 8 sandstones comprise fine to mediumgrained subarkoses, feldspathic litharenites. The pore systems are dominated by remaining primary intergranular pores, secondary dissolution porosity and micropores. Then, five diagenetic facies were divided in Chang 8 sandstones based on the type and degree of diagenesis, diagenetic minerals assemblages and their coupling effects on the reservoir quality. They consist of grain-coating chlorite weak dissolution facies, unstable component dissolution facies, tight compaction facies, clay minerals filling facies and carbonate cementation facies. The well logging response characteristics of various diagenetic facies are summarized on Gamma Ray (GR, Density Logging (DEN, Acoustic (AC, Compensated Neutron Logging (CNL, and True Formation Resistivity (RT by translating diagenetic facies to well log responses, the diagenetic facies were defined by a set of log responses, and porosity, permeability ranges for each diagenetic facies were determined from core analyses. Well log data of Luo 13 and Chi 212 are processed to evaluate the accuracy of the predictive model. The diagenetic facies are predicted on the vertical profile based on the generated model. Predicted distribution of diagenetic facies precisely coincide with the microscopic observations, and diagenetic facies in Chang 8 sandstones are generally

  9. Define Project

    DEFF Research Database (Denmark)

    Munk-Madsen, Andreas

    2005-01-01

    "Project" is a key concept in IS management. The word is frequently used in textbooks and standards. Yet we seldom find a precise definition of the concept. This paper discusses how to define the concept of a project. The proposed definition covers both heavily formalized projects and informally...... organized, agile projects. Based on the proposed definition popular existing definitions are discussed....

  10. Project Management

    DEFF Research Database (Denmark)

    Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015.......Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015....

  11. Imaging cross fault multiphase flow using time resolved high pressure-temperature synchrotron fluid tomography: implications for the geological storage of carbon dioxide within sandstone saline aquifers

    Science.gov (United States)

    Seers, Thomas; Andrew, Matthew; Bijeljic, Branko; Blunt, Martin; Dobson, Kate; Hodgetts, David; Lee, Peter; Menke, Hannah; Singh, Kamaljit; Parsons, Aaron

    2015-04-01

    Applied shear stresses within high porosity granular rocks result in characteristic deformation responses (rigid grain reorganisation, dilation, isovolumetric strain, grain fracturing and/or crushing) emanating from elevated stress concentrations at grain contacts. The strain localisation features produced by these processes are generically termed as microfaults (also shear bands), which occur as narrow tabular regions of disaggregated, rotated and/or crushed grains. Because the textural priors that favour microfault formation make their host rocks (esp. porous sandstones) conducive to the storage of geo-fluids, such structures are often abundant features within hydrocarbon reservoirs, aquifers and potential sites of CO2 storage (i.e. sandstone saline aquifers). The porosity collapse which accompanies microfault formation typically results in localised permeability reduction, often encompassing several orders of magnitude. Given that permeability is the key physical parameter that governs fluid circulation in the upper crust, this petrophysical degradation implicates microfaults as being flow impeding structures which may act as major baffles and/or barriers to fluid flow within the subsurface. Such features therefore have the potential to negatively impact upon hydrocarbon production or CO2 injection, making their petrophysical characterisation of considerable interest. Despite their significance, little is known about the pore-scale processes involved in fluid trapping and transfer within microfaults, particularly in the presence of multiphase flow analogous to oil accumulation, production and CO2 injection. With respect to the geological storage of CO2 within sandstone saline aquifers it has been proposed that even fault rocks with relatively low phyllosilicate content or minimal quartz cementation may act as major baffles or barriers to migrating CO2 plume. Alternatively, as ubiquitous intra-reservoir heterogeneities, micro-faults also have the potential to

  12. Project Management

    DEFF Research Database (Denmark)

    Pilkington, Alan; Chai, Kah-Hin; Le, Yang

    2015-01-01

    This paper identifies the true coverage of PM theory through a bibliometric analysis of the International Journal of Project Management from 1996-2012. We identify six persistent research themes: project time management, project risk management, programme management, large-scale project management......, project success/failure and practitioner development. These differ from those presented in review and editorial articles in the literature. In addition, topics missing from the PM BOK: knowledge management project-based organization and project portfolio management have become more popular topics...

  13. Noble gas and halogen evidence for the origin of Scandinavian sandstone-hosted Pb-Zn deposits

    Science.gov (United States)

    Kendrick, M. A.; Burgess, R.; Harrison, D.; Bjørlykke, A.

    2005-01-01

    Fluid origins in the sandstone-hosted Pb-Zn class of ore deposit have been investigated in three deposits from Scandinavia; Laisvall, Vassbo and Osen. The deposits studied are hosted by autochthonous Cambrian sandstones that preserve a near original structural relationship to the underlying Precambrian basement, enabling the role of basement interaction to be assessed. Mineral samples have been collected from across the paragenetic sequence: sphalerite, galena, pyrite, fluorite and barite, of impregnation and related joint-hosted mineralization. Fluid-inclusion halogen (Cl, Br and I) and noble gas isotope ( 40Ar, 36Ar, 84Kr) compositions were determined simultaneously by noble gas mass spectrometry of irradiated sample splits. Complementary He isotope analyses are obtained from nonirradiated splits of the same samples. 3He/ 4He values at Laisvall and Osen are highly radiogenic, 0.02 Ra, and the 4He/ 40Ar* ratio extends to values greater than the crustal production value of 5, characteristic of low-temperature crustal fluids. At Vassbo, a slightly elevated 3He/ 4He ratio of 0.1-0.3 Ra is compatible with a very minor mantle component (1%-4%) suggesting a distal source for the basinal brine-dominated fluid. Br/Cl molar ratios 3.2-8.2 × 10 -3 are greater than the present seawater value of 1.54 × 10 -3 and correspond with I/Cl molar ratios in the range 64-1600 × 10 -6. The upper limits of both the I/Cl and Br/Cl values are amongst the highest measured in crustal fluids. Together, the data indicate acquisition of salinity by the evaporation of seawater beyond the point of halite saturation and subsequent fluid interaction with I-rich organic matter in the subsurface. The data are compatible with the independent transport of sulfate and sulfide and indicate that fluids responsible for joint-hosted mineralization were distinct to those responsible for impregnation mineralization. All three deposits preserve fluids with 40Ar/ 36Ar in the range of 6,000-10,000 and fluid

  14. Effect of hydrocarbon to nuclear magnetic resonance (NMR) logging in tight sandstone reservoirs and method for hydrocarbon correction

    Science.gov (United States)

    Xiao, Liang; Mao, Zhi-qiang; Xie, Xiu-hong

    2017-04-01

    It is crucial to understand the behavior of the T2 distribution in the presence of hydrocarbon to properly interpret pore size distribution from NMR logging. The NMR T2 spectrum is associated with pore throat radius distribution under fully brine saturated. However, when the pore space occupied by hydrocarbon, the shape of NMR spectrum is changed due to the bulk relaxation of hydrocarbon. In this study, to understand the effect of hydrocarbon to NMR logging, the kerosene and transformer oil are used to simulate borehole crude oils with different viscosity. 20 core samples, which were separately drilled from conventional, medium porosity and permeability and tight sands are saturated with four conditions of irreducible water saturation, fully saturated with brine, hydrocarbon-bearing condition and residual oil saturation, and the corresponding NMR experiments are applied to acquire NMR measurements. The residual oil saturation is used to simulate field NMR logging due to the shallow investigation depth of NMR logging. The NMR spectra with these conditions are compared, the results illustrate that for core samples drilled from tight sandstone reservoirs, the shape of NMR spectra have much change once they pore space occupied by hydrocarbon. The T2 distributions are wide, and they are bimodal due to the effect of bulk relaxation of hydrocarbon, even though the NMR spectra are unimodal under fully brine saturated. The location of the first peaks are similar with those of the irreducible water, and the second peaks are close to the bulk relaxation of viscosity oils. While for core samples drilled from conventional formations, the shape of T2 spectra have little changes. The T2 distributions overlap with each other under these three conditions of fully brine saturated, hydrocarbon-bearing and residual oil. Hence, in tight sandstone reservoirs, the shape of NMR logging should be corrected. In this study, based on the lab experiments, seven T2 times of 1ms, 3ms, 10ms, 33ms

  15. Genetic and grade and tonnage models for sandstone-hosted roll-type uranium deposits, Texas Coastal Plain, USA

    Science.gov (United States)

    Hall, Susan M.; Mihalasky, Mark J.; Tureck, Kathleen; Hammarstrom, Jane M.; Hannon, Mark

    2017-01-01

    The coincidence of a number of geologic and climatic factors combined to create conditions favorable for the development of mineable concentrations of uranium hosted by Eocene through Pliocene sandstones in the Texas Coastal Plain. Here 254 uranium occurrences, including 169 deposits, 73 prospects, 6 showings and 4 anomalies, have been identified. About 80 million pounds of U3O8 have been produced and about 60 million pounds of identified producible U3O8 remain in place. The development of economic roll-type uranium deposits requires a source, large-scale transport of uranium in groundwater, and deposition in reducing zones within a sedimentary sequence. The weight of the evidence supports a source from thick sequences of volcanic ash and volcaniclastic sediment derived mostly from the Trans-Pecos volcanic field and Sierra Madre Occidental that lie west of the region. The thickest accumulations of source material were deposited and preserved south and west of the San Marcos arch in the Catahoula Formation. By the early Oligocene, a formerly uniformly subtropical climate along the Gulf Coast transitioned to a zoned climate in which the southwestern portion of Texas Coastal Plain was dry, and the eastern portion humid. The more arid climate in the southwestern area supported weathering of volcanic ash source rocks during pedogenesis and early diagenesis, concentration of uranium in groundwater and movement through host sediments. During the middle Tertiary Era, abundant clastic sediments were deposited in thick sequences by bed-load dominated fluvial systems in long-lived channel complexes that provided transmissive conduits favoring transport of uranium-rich groundwater. Groundwater transported uranium through permeable sandstones that were hydrologically connected with source rocks, commonly across formation boundaries driven by isostatic loading and eustatic sea level changes. Uranium roll fronts formed as a result of the interaction of uranium-rich groundwater

  16. Micro-seismicity and permeability enhancement in sandstone and andesite ruptured by fluid injection under triaxial conditions

    Science.gov (United States)

    Nicolas, Aurélien; Blöcher, Guido; Li, Zhi; Kluge, Christian; Pei, Liang; Hofmann, Hannes; Milsch, Harald; Guéguen, Yves

    2017-04-01

    Hydraulic stimulation of a well alters the physical properties (such as permeability) of the surrounding rock and potentially triggers seismicity. This is of special interest for exploitation of geothermal fields for which permeability needs to be enhanced, but induced seismicity should be avoided. Therefore, we performed a study combining records of acoustic emissions (equivalent to micro-seismicity) and local permeability evolution in two permeable rocks: Flechtinger sandstone (Bebertal, Germany) and an andesite from Guadeloupe (French Antillas). In this study, mechanical instability is triggered in the laboratory by injecting fluid in the pores of the rock (increasing pore pressure) in samples that are under triaxial stresses. During the experiments, acoustic emissions and local permeability changes are recorded with a passive acoustic system and fiber optic measurements, respectively. Samples are hydrostatically loaded to 20 MPa and then axially loaded to a differential stress of 100 MPa. This stress state is maintained constant for 24h to make sure that no brittle creep takes place and could lead to the macroscopic failure. Then, a pore pressure of 15 MPa is applied at the bottom of the sample and maintained constant. These experiments were performed in the triaxial cell installed at ENS Paris, which is instrumented with 16 acoustic sensors to record acoustic emissions. During pore pressure increase, acoustic emissions are recorded to understand the coupling between water front migration and induced seismicity. However, local permeability changes could not be recorded with this setup. Thus, the same experiments are performed in a similar triaxial cell at GFZ Potsdam where the samples are instrumented with three optic fibers that are able to record local pore pressure at three equidistant locations along the sample axis. Permeability evolution along the sample axis is calculated with Darcy's law between the points of local pore pressure measurements. By

  17. Provenance shift in Cambrian mid-Baltica: detrital zircon chronology of Ediacaran–Cambrian sandstones in Estonia

    Directory of Open Access Journals (Sweden)

    Yukio Isozaki

    2014-12-01

    Full Text Available In order to clarify the tectono-sedimentary history of Paleozoic Baltica, age spectra of detrital zircon grains from the Ediacaran (Kotlin Regional Stage and Lower Cambrian sandstones (lowermost Lontova and Lükati formations in western Estonia in central Baltica were analyzed by LA-ICPMS. The abundant occurrence of Archean to Mesoproterozoic (2800–1000 Ma zircon grains was confirmed in all samples. The new data provided the following information on the provenance of siliciclastic material as well as a major change in the sedimentary regime of the Paleo-Baltic basin during the Early Cambrian: (1 the Ediacaran–Lower Cambrian Paleo-Baltic basin received abundant terrigenous clastics from the core of Baltica underlain by the Archean–Mesoproterozoic crystalline crust, (2 the exposed surface area of the 1600 Ma Rapakivi granites apparently was more extensive during the Ediacaran–Early Cambrian than at present, (3 a major re-organization of the basin geometry occurred in the middle Early Cambrian (ca 530–515 Ma in central Baltica, inducing a change in the sediment supply system, (4 in contrast to the total absence of Neoproterozoic detrital zircon grains before the middle Early Cambrian, their sudden appearance at this time, together with consistent occurrence at least until the mid-Devonian, suggests a significant uplift event located in southeast Baltica and/or in a more easterly land domain (e.g., in Sarmatia, (5 possible sources for the Neoproterozoic zircon grains include the peripheral mobile belts with pan-African signatures around Baltica, e.g., the so-called Gondwanan fragments along the Tornquist margin to the southwest and the Timanian belt along the northeastern margin.

  18. Effect of pore and confining pressure on the supercritical CO2 permeability of sandstone: Implications for the effective pressure law

    Science.gov (United States)

    Choi, C. S.; Cheon, D. S.; Song, J. J.

    2017-08-01

    The liquid permeability of rock with distilled water or brine is different from that obtained using gas by variation in the confining pressure Pc and pore pressure Pp. In this study, as part of the research on CO2 geological storage, the permeability of sandstone was measured using supercritical CO2, and the effect of Pc and Pp on this permeability was analyzed. For applying the effective pressure law to the analysis, an effective pressure coefficient for permeability was derived experimentally. In order to utilize supercritical CO2, a non-Darcy flow test with a high flow rate was conducted, and the permeability was estimated through the Forchheimer equation. We contoured iso-permeability lines with confining and pore pressure conditions that have identical permeability, and the effective pressure coefficient, χ, was derived from the gradient of the lines following the definition of the effective pressure law. It was identified that the coefficient could be different depending on the pressure conditions. To clarify the variation of the coefficient, we derived the coefficient of χ(Pc, Pp) as a function of pore and confining pressure. The coefficient increased nonlinearly as the difference between Pc and Pp decreased, with a maximum of 1.36 being observed. The correlation between the effective pressure and the permeability were examined by applying empirical models. It was determined that the power law model was appropriate to estimate the change in supercritical CO2 permeability. Especially, it was deduced that the effective pressure with the derived coefficient would be more valid than the Terzaghi effective pressure.

  19. Mechanical constraints on the chronology of fracture activation in folded Devonian sandstone of the western Moroccan Anti-Atlas

    Science.gov (United States)

    Guiton, Martin L. E.; Sassi, William; Leroy, Yves M.; Gauthier, Bertrand D. M.

    2003-08-01

    The three-dimensional meter-scale fracture networks, observed on exposed folds between the towns of Tata and Akka, western Moroccan Anti-Atlas, consist mostly of planar discontinuities, which are sub-perpendicular to the bedding and partitioned in three main sets. The chronology of their activation is proposed in five stages since the Hercynian orogeny. Stage 1 predates folding and involves the horizontal compression of the Emsian sandstone. It involves fracture set I, composed of systematic joints parallel to the direction of compression. Stages 2-4 correspond to the folding and are marked in the outer-arc by the activation of fracture set II, composed mainly of joints parallel to the fold axial plane. Stage 5 is a regional shear event during which sets I and III, separated by an angle close to 60°, are activated in a conjugate manner. To throw light on the recurrent difficulty in discriminating between activation of inherited and new fractures, an elasto-plastic model is used to construct a stress path in the pervasively fractured medium idealized as a continuum. Each fracture set obeys the Mohr-Coulomb criterion truncated in tension to describe both sliding and opening activations. Finite-element simulations of a simple buckling event accounting for the field fracture sets are presented. It is shown that set I cannot be generated by folding and thus does belong to stage 1. Set II is activated at a later stage of folding than expected from the field interpretation. Set III cannot be activated during stage 2, confirming its role in stage 5. The advantages and limitations of the proposed modeling are finally discussed.

  20. Damage evaluation on oil-based drill-in fluids for ultra-deep fractured tight sandstone gas reservoirs

    Directory of Open Access Journals (Sweden)

    Jinzhi Zhu

    2017-07-01

    Full Text Available In order to explore the damage mechanisms and improve the method to evaluate and optimize the performance of formation damage control of oil-based drill-in fluids, this paper took an ultra-deep fractured tight gas reservoir in piedmont configuration, located in the Cretaceous Bashijiqike Fm of the Tarim Basin, as an example. First, evaluation experiments were conducted on the filtrate invasion, the dynamic damage of oil-based drill-in fluids and the loading capacity of filter cakes. Meanwhile, the evaluating methods were optimized for the formation damage control effect of oil-based drill-in fluids in laboratory: pre-processing drill-in fluids before grading analysis; using the dynamic damage method to simulate the damage process for evaluating the percentage of regained permeability; and evaluating the loading capacity of filter cakes. The experimental results show that (1 oil phase trapping damage and solid phase invasion are the main formation damage types; (2 the damage degree of filtrate is the strongest on the matrix; and (3 the dynamic damage degree of oil-based drill-in fluids reaches medium strong to strong on fractures and filter cakes show a good sealing capacity for the fractures less than 100 μm. In conclusion, the filter cakes' loading capacity should be first guaranteed, and both percentage of regained permeability and liquid trapping damage degree should be both considered in the oil-based drill-in fluids prepared for those ultra-deep fractured tight sandstone gas reservoirs.

  1. Improved estimates of formation factor for combined electrical and nuclear magnetic resonance models of permeability of sandstone cores

    Science.gov (United States)

    Osterman, G. K.; Keating, K.; Binley, A. M.; Slater, L. D.; McDonald, R.

    2014-12-01

    In spite of the importance of permeability in controlling numerous hydrogeological and biogeochemical processes, the property can be exceptionally difficult to measure directly in the field. Recently, nuclear magnetic resonance (NMR) has become an increasingly popular method, both in the lab and the field, for hydrogeophysical investigations due to its sensitivity to water content and pore surface area. Additionally, previous work has shown that the electrical formation factor can be used as a proxy for the tortuosity of the pore space—a parameter NMR is incapable of detecting—in permeability models. However, the formation factor is impossible to accurately measure in the field using DC electrical methods, as the measured conductivity cannot be decomposed into the fluid and surface conduction components. Therefore, our approach is to use induced polarization (IP) and spectral induced polarization (SIP) in the laboratory to correct for the influence of surface conductivity in the formation factor calculation. The corrected formation factor can then be used along with NMR parameters for more accurate permeability estimation. Laboratory SIP and NMR datasets were acquired on 40 sandstone cores with a range of permeabilities spanning six orders of magnitude as estimated from gas permeameter measurements. We examine how different estimates of the electrical formation factor can be combined with the NMR transverse relaxation time to estimate permeability. Specifically, we compare the electrical formation factor measured at high and low pore-fluid salinity with the formation factor derived using IP and SIP. Using both empirical and mechanistic petrophysical relationships, we explore the utility of IP- and SIP-corrected formation factors in tandem with NMR parameters for permeability prediction as compared to the low-salinity formation factor typically measured in the field. Furthermore, we develop our models using IP and SIP data that may be acquired in the field

  2. Capillarity test monitored by X-ray computer tomography in sandstones. A comparative study with standard methods

    Directory of Open Access Journals (Sweden)

    Celorio, C.

    2008-06-01

    Full Text Available Computerized axial tomography studies were conducted to analyze water movements inside rocks (specifically in La Marina sandstone, used to build some of the historic monuments in Asturias, northern Spain. The X-ray images of water uptake by the stone interior recorded during capillarity tests provided supplementary information not furnished by conventional methods. The three-dimensional images obtained showed the position of the water front over time and its relationship to rock petrography. The volume of water-soaked rock proved to be a more realistic measure of stone capillarity. The results obtained were compared to mean capillarity measured as recommended in Spanish and European standard UNE-EN 1925:1999.La Tomografía Axial Computerizada de rayos X (TAC ha sido aplicada al estudio del movimiento del agua en el interior de las rocas, usando como modelo la arenisca de La Marina, roca utilizada en la construcción de algunos monumentos históricos en Asturias (norte de España. Durante los ensayos de capilaridad se han registrado las imágenes de rayos X de la penetración del agua en el interior de la roca que suministran información no aportada por los métodos habituales. La reconstrucción tridimensional muestra la posición del frente de agua a lo largo del tiempo y su relación con las características petrográficas de la roca. La cuantificación del porcentaje en volumen de roca embebida en agua es una medida más real de la capilaridad de la misma. Los resultados así obtenidos han sido comparados con los de la capilaridad medida por el método descrito en la norma UNE-EN 1925:1999.

  3. Characterization of immiscible fluid displacement processes with various capillary numbers and viscosity ratios in 3D natural sandstone

    Science.gov (United States)

    Tsuji, Takeshi; Jiang, Fei; Christensen, Kenneth T.

    2016-09-01

    To characterize the influence of reservoir conditions upon multiphase flow, we calculated fluid displacements (drainage processes) in 3D pore spaces of Berea sandstone using two-phase lattice Boltzmann (LB) simulations. The results of simulations under various conditions were used to classify the resulting two-phase flow behavior into three typical fluid displacement patterns on the diagram of capillary number (Ca) and viscosity ratio of the two fluids (M). In addition, the saturation of the nonwetting phase was calculated and mapped on the Ca-M diagram. We then characterized dynamic pore-filling events (i.e., Haines jumps) from the pressure variation of the nonwetting phase, and linked this behavior to the occurrence of capillary fingering. The results revealed the onset of capillary fingering in 3D natural rock at a higher Ca than in 2D homogeneous granular models, with the crossover region between typical displacement patterns broader than in the homogeneous granular model. Furthermore, saturation of the nonwetting phase mapped on the Ca-M diagram significantly depends on the rock models. These important differences between two-phase flow in 3D natural rock and in 2D homogeneous models could be due to the heterogeneity of pore geometry in the natural rock and differences in pore connectivity. By quantifying two-phase fluid behavior in the target reservoir rock under various conditions (e.g., saturation mapping on the Ca-M diagram), our approach could provide useful information for investigating suitable reservoir conditions for geo-fluid management (e.g., high CO2 saturation in CO2 storage).

  4. Mapping alien and indigenous vegetation in the KwaZulu-Natal Sandstone Sourveld using remotely sensed data

    Directory of Open Access Journals (Sweden)

    John Odindi

    2016-11-01

    Full Text Available Background: The indigenous KwaZulu-Natal Sandstone Sourveld (KZN SS grassland is highly endemic and species-rich, yet critically endangered and poorly conserved. Ecological threats to this grassland ecosystem are exacerbated by encroachment of woody plants, with severe negative environmental and economic consequences. Hence, there is an increasing need to reliably determine the extent of encroached or invaded areas to design optimal mitigation measures. Because of inherent limitations that characterise traditional approaches like field surveys and aerial photography, adoption of remotely sensed data offer reliable and timely mapping of landscape processes.Objectives: We sought to map the distribution of woody vegetation within the KZN SS using remote sensing approaches.Method: New generation RapidEye imagery, characterised by strategically positioned bands, and the advanced machine learning algorithm Random Forest (RF were used to determine the distribution and composition of alien and indigenous woody vegetation within the KZN SS.Results: Results show that alien and indigenous encroachment and invasion could be mapped with over 86% accuracy whilst the dominant indigenous and alien tree species could be mapped with over 74% accuracy. These results highlight the potential of new generation RapidEye satellite data in combination with advanced machine learning technique in predicting the distribution of alien and indigenous woody cover within a grassland ecosystem. The successful discrimination of the two classes and the species within the classes can be attributed to the additional strategically positioned bands, particularly the red-edge in the new generation RapidEye image.Conclusion: Results underscore the potential of new generation RapidEye satellite data with strategically positioned bands and an advanced machine learning algorithm in predicting the distribution of woody cover in a grassland ecosystem.

  5. Managing a threatened savanna ecosystem (KwaZulu-Natal Sandstone Sourveld in an urban biodiversity hotspot: Durban, South Africa

    Directory of Open Access Journals (Sweden)

    Richard Boon

    2016-11-01

    Full Text Available Background: The city of Durban in the province of KwaZulu-Natal (KZN, South Africa, falls within a global biodiversity hotspot. KwaZulu-Natal Sandstone Sourveld (KZNSS is a savanna vegetation type endemic to KZN. KZNSS is endangered; about 90% has been totally modified and 0.1% of the original extent is adequately protected. In response, eThekwini Municipality, Durban’s local government authority, has developed approaches to improve the conservation status of KZNSS and other biodiversity.Objectives: To describe eThekwini Municipality’s work in contributing to securing and managing KZNSS and other biodiversity. This information will contribute to an increased understanding of local government’s role in biodiversity conservation and should be relevant to other local governments as well.Method: Statistics from the municipality’s GIS database and work done and insights gained over about 30 years are presented.Results: By 2012, about 54% of Durban’s original vegetation was transformed and a further 17% was highly degraded. Combined efforts have resulted in 3.06% of the eThekwini Municipal Area enjoying some form of legal protection for environmental purposes with proclaimed protected areas covering 0.6% of the municipal area. Nearly 8% of areas identified as environmentally significant by the municipality are managed as appropriate.Conclusion: Increased and coordinated implementation efforts with a focus on priorities are needed from all role players if biodiversity is to be adequately conserved in Durban. Local government in South Africa can be an important contributor in biodiversity conservation, especially with regard to tools available in terms of its local planning mandate.

  6. Ground water in folded Cretaceous sandstone of the Bhachau area, Kutch, India, with reference to the Kandla Port water supply

    Science.gov (United States)

    Taylor, George C.; Osa, H.M.; Mitra, A.; Sen, B.N.

    1964-01-01

    This report is based on an investigation of the availability of ground-water supplies in the Bhachau area for the nearby Kandla Port and township development undertaken by the Government of India. This seaport lies on an estuary of the Gulf of Kutch in western India and in the eastern part of the State of Kutch. The fieldwork on the investigation was carried on from November 1952 through April 1953 with continuing hydrologic observations through 1954-55. The fieldwork included: geologic mapping and delimitation of the principal aquifers of the region; preparation of water-table maps; a detailed inventory of existing wells and springs; observations of significant water table fluctuations; preparation of isobicarb, isochlor and isosulf maps to show the areal distribution of ground-water salinity. The Bhachau area includes about 116 square miles in eastern Kutch and lies in a belt of semiarid low-latitude steppes. The mean annual rainfall is about 15 inches, most of which falls from late June to late September during the southwest monsoon. The area includes a central sandy upland ranging from about 100 to 250 feet above sea level ; a northern lowland of between about 50 to 125 feet altitude that slopes north to the Great Rann of Kutch; a belt of low buttes and discontinuous ridges ranging from about 200 to 275 feet above sea level; and southern lowland which slopes in a southerly to southeasterly direction from an altitude of about 125 feet to 25 feet or less near the Gulf of Kutch. The principal streams are Kageshwar Vokra and Kara Vokra which drain north to the Great Rann and Kotwala Vokra and Dalwala Vokra which drain south toward the Gulf of Kutch. The rocks of the Bhachau area include nonmarine and marine sediments of Mesozoic, Tertiary, and Quaternary age and volcanic rocks of late Mesozoic to early Tertiary age. The oldest rocks in the area are medium- to coarse-grained white to buff current-bedded friable sandstone with occasional partings of white silty shale

  7. An Evaluation of the Carbon Sequestration Potential of the Cambro-Ordovician Strata of the Illinois and Michigan Basins. Part 1. Evaluation of Phase 2 CO2 Injection Testing in the Deep Saline Gunter Sandstone Reservoir (Cambro-Ordovician Knox Group), Marvin Blan No. 1 Hancock County, Kentucky Part 2. Time-lapse Three-Dimensional Vertical Seismic Profile (3D-VSP) of Sequestration Target Interval with Injected Fluids

    Energy Technology Data Exchange (ETDEWEB)

    Bowersox, Richard [Univ. of Illinois, Champaign, IL (United States); Hickman, John [Univ. of Illinois, Champaign, IL (United States); Leetaru, Hannes [Univ. of Illinois, Champaign, IL (United States)

    2012-12-20

    Part 1 of this report focuses on results of the western Kentucky carbon storage test, and provides a basis for evaluating injection and storage of supercritical CO2 in Cambro-Ordovician carbonate reservoirs throughout the U.S. Midcontinent. This test demonstrated that the Cambro- Ordovician Knox Group, including the Beekmantown Dolomite, Gunter Sandstone, and Copper Ridge Dolomite in stratigraphic succession from shallowest to deepest, had reservoir properties suitable for supercritical CO2 storage in a deep saline reservoir hosted in carbonate rocks, and that strata with properties sufficient for long-term confinement of supercritical CO2 were present in the deep subsurface. Injection testing with brine and CO2 was completed in two phases. The first phase, a joint project by the Kentucky Geological Survey and the Western Kentucky Carbon Storage Foundation, drilled the Marvin Blan No. 1 carbon storage research well and tested the entire Knox Group section in the open borehole – including the Beekmantown Dolomite, Gunter Sandstone, and Copper Ridge Dolomite – at 1152–2255 m, below casing cemented at 1116 m. During Phase 1 injection testing, most of the 297 tonnes of supercritical CO2 was displaced into porous and permeable sections of the lowermost Beekmantown below 1463 m and Gunter. The wellbore was then temporarily abandoned with a retrievable bridge plug in casing at 1105 m and two downhole pressure-temperature monitoring gauges below the bridge plug pending subsequent testing. Pressure and temperature data were recorded every minute for slightly more than a year, providing a unique record of subsurface reservoir conditions in the Knox. In contrast, Phase 2 testing, this study, tested a mechanically-isolated dolomitic-sandstone interval in the Gunter.

  8. Alzheimer's Project

    Medline Plus

    Full Text Available ... Momentum in Science, Part 2" (70 minutes) Be a part of something big. HBO's "THE ALZHEIMER'S PROJECT" ... vital research and services. "THE ALZHEIMER'S PROJECT" is a presentation of HBO Documentary Films and the National ...

  9. Project ethics

    CERN Document Server

    Jonasson, Haukur Ingi

    2013-01-01

    How relevant is ethics to project management? The book - which aims to demystify the field of ethics for project managers and managers in general - takes both a critical and a practical look at project management in terms of success criteria, and ethical opportunities and risks. The goal is to help the reader to use ethical theory to further identify opportunities and risks within their projects and thereby to advance more directly along the path of mature and sustainable managerial practice.

  10. Operation SANDSTONE: 1948

    Science.gov (United States)

    1983-12-19

    instruments, 20 additional (un- modified) Rauland- Zeus Alpha--Beta-Gamma meters, and 20 AEC-designed Pluto meters (Reference C.43. p. 13). AEC was responsible... Zeus ) covers 6 each 263A covers 15 each One calibration source (Cobalt) will be delivered prior to departure of U.S.S. BAIROKO. This should be kept...Public Lib University of Tulsa ATTN: Librarian ATTN: Librarian Temple University ATTN: Librarian UCLA Research Library ATTN: Public Affairs Svc/US Dots

  11. Aquifer prospect and vulnerability of Upper Maastrichtian sandstones: Case of Ajali and Nsukka formations in the Northern Enugu Province, southeastern Nigeria

    Science.gov (United States)

    Ukpai, Stephen N.; Ezeh, Hilary N.; Igwe, James O.

    2017-11-01

    Two typical aquifer systems, namely, regional aquifer and local Perched aquifer have been delineated in the study area. The regional aquifer was identified at about 100 m depth around lowland areas, although prone to polluting effects from farming activities, erosion and weathering processes. This study investigated extents of groundwater pollution and permeability of the aquifers from water sample and grain size analyses. Results show porosity ranging from 49 to 50% and hydraulic conductivities as follows: 7.0 m/day for the sandstone of Nsukka Formation, 34.6 m/day for the outcrop of Ajali sandstone and 10.4 m/day for the sandstone at saturated subsurface zone with transmissivity of about 572 m2/day. The results signify that the regional aquifer is recharged by substantial rate of infiltrations vis-a-vis surface outcrops, and is therefore vulnerable to infiltration of pollution plumes. The groundwater is mainly acidic at pH ranging from 5.05 to 7.41 with a mean value of about 6.48, hence the pollution from dissolved iron in many places. Three main water types were identified, namely, Ca-Mg-HCO3, Ca-HCO3-Cl2 and Mg-Na-HCO3-SO4-Cl2 facies, all signifying dominance of groundwater species arising from precipitation recharge. This has resulted in the influences of surface effluents from run off as indicated by nitrate pollution in some areas. Thus, active hydrologic cycle controls the chemical facies in the water resources of the region, and with its hydraulic influence on the landscape, the quality status of groundwater, as well as the growth of agricultural products have been impaired.

  12. Laser Ablation Split Stream (LASS) U-Pb & Lu-Hf Isotope Analysis of Detrital Zircons from the Old Red Sandstone, NW Svalbard: Implications for Northern Caledonian Paleogeography

    Science.gov (United States)

    Beranek, L. P.; Gee, D. G.; Fisher, C. M.

    2015-12-01

    The Svalbard archipelago consists of three Caledonian provinces that were assembled by thrusting and transcurrent faulting during the Silurian and Devonian in a location directly northeast of the Greenland Caledonides. Syn- to post-orogenic alluvial strata, referred to as the Old Red Sandstones, filled pull-apart basins adjacent to the transcurrent faults and comprise cover assemblages that help constrain the timing of the Caledonian orogeny. To further investigate the tectonic history and paleogeography of the Raudfjorden-Liefdefjorden-Woodfjorden area of Spitsbergen, NW Svalbard, we analyzed rock samples of the Old Red Sandstones and underlying Precambrian basement complexes for detrital zircon analysis. Laboratory studies of the Old Red Sandstones include the novel Laser Ablation Split Stream (LASS) technique, which allows for simultaneous U-Pb & Lu-Hf isotope analysis of zircon crystals. Lower Devonian Red Bay Group strata contain a range of early Neoproterozoic to Neoarchean detrital zircons with prominent age peaks c. 960, 1050, 1370, 1450, 1650, and 2700 Ma; subordinate Ordovician (c. 460-490 Ma) and Cryogenian (c. 650 Ma) detrital zircons occur in a subset of the samples. Underlying Precambrian metasedimentary rocks are composed of similar earliest Neoproterozoic to Neoarchean age populations, which argues for much of the Red Bay Group to be derived from local basement rocks during thrusting and other faulting. The U-Pb ages and Hf isotope compositions of Paleozoic to Neoarchean detrital zircons are consistent with Arctic crustal evolution, and support the hypothesis that northwestern and northeastern provinces of the Svalbard Caledonides are extruded fragments of the northeast Greenland allochthons. The new Hf isotope results further allow paleogeographic and stratigraphic comparisons with rock assemblages proximal to the North Atlantic Caledonides during the Silurian-Devonian, including the Pearya terrane of Ellesmere Island, Alexander terrane of NW

  13. Study on the water retention effect of compound soil of arsenic sandstone and sand under the condition of typical crop planting

    Science.gov (United States)

    Liu, S. Y.; Wang, N.; Xie, J. C.; Jiang, R. G.; Zhao, M. L.

    2017-08-01

    Arsenic sandstone is the main reason of soil erosion in the Mu Us Sandy Land, simultaneously was proved to be a kind of good water retaining agent. In order to provide references for the utilization of water and soil resources and the prevention and control of desertification and soil erosion of the southern margin of Mu Us Sandy Land, on the basis of earlier studies the farmland experiments of compound soil with three ratios of 1:1, 1:2 and 1:5 between arsenic sandstone and sand under maize planting patterns were designed, whose experimental process was divided into six stages according to the crop growth status. The results showed that the soil moisture content was highest in the layer of 0∼40cm where the compound soil mainly concentrated in, which was related to the potent water retention of arsenic sandstone and strong water permeability of undisturbed sandy soil. The variation coefficients in the soil of 1:1 and 1:2 were more stable and evenly distributed. The compound soil can effectively improve the soil water retention capacity, and prolong the storage time of soil water. Among them, water loss rate in soil of 1:1 and 1:2 were lower. The coefficient of variation also confirms that the water distributions of the two types of soil were more uniform and stable. Besides illustrating the effects of the soil amelioration measures on spatial and temporal variation of soil moisture content and the improvement of soil water regime, the study provides some references for the development and utilization of agriculture in Mu Us Sandy Land.

  14. Intrinsic factors determining the physical behaviour and durability ofthe Miocene sandstones used to build the Zaghouan-Carthage aqueduct (Tunis

    Directory of Open Access Journals (Sweden)

    Zoghlami, K.

    2004-12-01

    Full Text Available The present paper addresses the relationship between the intrinsic factors, physical behaviour and durability of Miocene Age sandstone used to build Tunisian Heritage Monuments, and more specifically the Zaghouan-Carthage aqueduct. A petrography study (optical microscopy and mercury intrusion porosi metry was conducted to characterize the porous system of the rock. Stone hydric behaviour was also determined by finding vacuum saturation, desorption, capillary and water vapor transmission. Finally, mechanical strength (compressive strength, abrasion resistance and durability (via accelerated sodium sulfate crystallization ageing were also found. The results obtained were indicative of good hydric performance due to the macroporous nature of the stone and the connectivity of its porous system. This rock was also found to have very low mechanical strength due to its scant lithification, making it particularly susceptible to salt weathering. It was also observed to be highly resistant to chemical alteration, given the absence of chemically unstable minerals in its composition. The durability of the material was consequently found to depend directly on the presence or absence of salts in the monument.

    En este trabajo se estudia la relación entre los factores intrínsecos, el comportamiento físico y la alterabilidad de la arenisca miocénica utilizada en el Patrimonio Monumental de Túnez, en concreto, en el acueducto romano de Zaghouan-Cartago. A partir del estudio petrográfico detallado de la roca se ha caracterizado el sistema poroso mediante microscopía y porosimetría de mercurio. También se ha caracterizado su comportamiento hídrico (absorción al vacío, desorción, capilaridad, permeabilidad al vapor de agua, se ha determinado su comportamiento mecánico (resistencia a compresión, resistencia al desgaste por rozamiento y su durabilidad mediante ensayos acelerados de cristalización de sales (sulfato de sodio. Los resultados

  15. Paleogene carbonate microfacies and sandstone provenance (Gamba area, South Tibet): Stratigraphic response to initial India-Asia continental collision

    Science.gov (United States)

    Li, Juan; Hu, Xiumian; Garzanti, Eduardo; An, Wei; Wang, Jiangang

    2015-05-01

    The Paleogene marine strata in the Gamba area of south Tibet comprise carbonates of the Zongpu Formation and siliciclastic rocks of the Enba and Zhaguo Formations, documenting the final stages of marine deposition in the Tethyan Himalaya. The ∼350-m-thick Zongpu Formation was dated as late Danian to Ypresian based on larger benthic foraminifers. Thirteen distinct microfacies identify three sedimentary environments. Mudstone, wackestone with Udoteacean algae, bioclastic-peloidal packstone, packstone with Rotaliids and green algae, floatstone with Alveolina and Orbitolites were deposited in restricted lagoonal environments. Bioclastic packstone and grainstone with Rotaliids were deposited in high-energy shoal environments. Floatstones with Nummulitids or Alveolinids were deposited in shallow open-marine environments. The Zongpu Formation was accumulated on a carbonate ramp. It documents two deepening-upward sequences separated by an unconformity corresponding to the Palaeocene/Eocene boundary and marked by a conglomerate with limestone clasts. The overlying Enba Formation comprises greenish grey calcareous shales intercalated with litho-quartzose sandstones in the upper part and capped by subaerial litho-quartzose red beds of the Zhaguo Formation. Petrographic analysis, detrital zircon geochronology and Hf isotopic data indicate that detritus in the Enba and Zhaguo Formations, deposited on the Indian passive margin, was derived from the Asian active margin in the north. These clastic units were thus deposited after the onset of the India-Asia continental collision in the early Himalayan foreland basin. Major lithological and paleoenvironmental changes occurred at three stratigraphic levels: the Jidula/Zongpu boundary (∼62 Ma), the Paleocene/Eocene boundary (∼56 Ma) and the Zongpu/Enba boundary (∼51 Ma). Our provenance study confirms that the India-Asia collision was already under way during the deposition of the Enba Member (i.e., by ∼51 Ma) and, along with

  16. Elasto-Plastic Constitutive Behavior in Three Lithofacies of the Cambrian Mt. Simon Sandstone, Illinois Basin, USA

    Science.gov (United States)

    Dewers, T.; Newell, P.; Broome, S. T.; Heath, J. E.; Bauer, S. J.

    2012-12-01

    The Mt. Simon Formation, a basal Cambrian sandstone underlying the Illinois Basin in the Central US, is a target for underground storage and waste injection which require an assessment of geomechanical behavior. The range of depositional environments, from braided streams and minor eolean features in the lower Mt Simon, to tidally-influenced near- and on-shore sands in the upper Mt. Simon, yield a heterogeneous formation with a range in porosity, permeability, and mechanical properties. We examine the experimental deformational behavior of three distinct Mt. Simon lithofacies via axisymmetric compressional testing. Initial yielding is confirmed with acoustic emissions in many of the tests and failure envelopes are determined for each lithofacies. The evolution of (assumed) isotropic elastic moduli are examined during testing by use of unload-reload cycles, which permit the separation of total measured strains into elastic and plastic (permanent) strains. The upper Mt Simon samples deform largely elastically at stresses encountered in the Illinois Basin, with very little modulus degradation. The lower Mt. Simon facies are weaker and deform plastically, with varying amounts of modulus degradation. Results are interpreted via petrographic observation of textural contrasts. This range in constitutive response is captured up to failure with a phenomenological elasto-plasticity model. Essential aspects to describe observed behavior used in the model include non-associative plasticity, stress-invariant dependent failure, an elliptical cap surface capturing shear effects on pore collapse, kinematic and isotropic hardening, nonlinear elasticity and elastic-plastic coupling, among other features. Static moduli derived from laboratory tests are compared to dynamic moduli from wellbore log response which can allow experimental results and model to be extrapolated to Mt. Simon occurrences across the basin. This work was funded in part by the Center for Frontiers of Subsurface

  17. A lot gone but still hanging on: Floristics of remnant patches of endangered KwaZulu-Natal Sandstone Sourveld

    Directory of Open Access Journals (Sweden)

    Charmaine C. Drury

    2016-11-01

    Full Text Available Background: KwaZulu-Natal Sandstone Sourveld (KZNSS is an endangered subtropical grassland type, of which a large proportion occurs within the eThekwini Municipal Area (EMA.Objectives: Examining the flora of KZNSS will allow a more fundamental understanding of the potential variability across remnant patches of this vegetation type, increasing the ability to accurately delimit KZNSS from adjacent similar vegetation types.Method: Floristic data were collected using quadrats and transects for three recognised KZNSS sites (Giba Gorge Environmental Precinct (GGEP, Inanda Mountain (IM and Springside Nature Reserve (SSNR, all within the EMA. Alpha diversity (Shannon’s exponential and Simpson’s inverse indices and beta diversity measures were calculated and compared across all sites. An unweighted pair group method with arithmetic mean (UPGMA analysis using the Jaccard index and a non-parametric multidimensional scaling (NMDS ordination were used to assess similarity amongst quadrats across the three sites.Results: One hundred and thirty-one plant species were found to occur in GGEP, 95 in IM and 121 in SSNR. However, of the total 193 species found to occur collectively (i.e. quadrat and transect data combined across the three sites, only 50 species were common to all these sites. The results of the alpha and beta diversity analyses revealed significant floristic variability both within and across the KZNSS sites sampled, with Shannon’s exponential index being highest in SSNR, followed by GGEP and lowest in IM. The lack of controlled access and unregulated burning regimes appear to have clearly affected the flora at the IM site in terms of species richness and increased evenness, as well as the relatively greater presence of introduced alien species and lower abundances of taxa of conservation concern. The pristine GGEP site had the highest number of species in total, with species being less evenly spread across the site, as

  18. Lichens as possible agents of sandstone deterioration in Jesuitic ruins of San Ignacio Miní (Misiones Province, Argentina

    Directory of Open Access Journals (Sweden)

    Rosato, V. G.

    2010-09-01

    Full Text Available The ruins of San Ignacio Miní, in NE Argentina, Misiones Province, included by the UNESCO in the list of World Heritage in 1984, were built in the 18th century by the Guarani people under the supervision of the Jesuite Congregation. The ruins are located in a tropical weather zone, exposed to extreme conditions of heat and humidity affecting the rocks used in its construction. These rocks are identified as siliceous sandstones, mainly formed by rounded to subrounded clasts, with scarce angulose particles, containing 96% quartz. Weather characteristics encourage the growth of vascular plants as well as algae and mosses and other organisms that damage materials. Among these, there are 18 lichen species (belonging to 18 genera, 8 foliose, 3 fruticose and 7 crustose. The damaging action of these lichens has been observed through SEM observations and EDAX microanalysis of rock samples colonized by Caloplaca sp. and Buellia sp.

    Incluidas en la lista de Patrimonio Mundial por la UNESCO, las ruinas de San Ignacio Miní, en el NE de Argentina, provincia de Misiones, fueron construidas en el siglo XVIII por pobladores guaraníes supervisados por la Compañía de Jesús. Las ruinas se encuentran en una zona de clima tropical, expuestas a condiciones extremas de calor y humedad que alteran a las rocas empleadas en su construcción. Estas rocas se identifican como areniscas silíceas, formadas por clastos redondeados a sub-redondeados, con escasas partículas angulosas, con un contenido de 96,0% cuarzo. Las características del clima favorecen el desarrollo tanto de plantas vasculares como también de musgos, algas y otros organismos capaces de dañar a los materiales. Entre éstos se incluyen 18 especies de líquenes (pertenecientes a 18 géneros, 8 foliosos, 3 fruticosos y 7 crustosos. Las observaciones con SEM y los microanálisis EDE de muestras de roca colonizadas por Caloplaca sp. y Buellia sp sugieren que estos líquenes ejercen una acci

  19. Strength Restoration of Cracked Sandstone and Coal under a Uniaxial Compression Test and Correlated Damage Source Location Based on Acoustic Emissions

    Science.gov (United States)

    Feng, Xiaowei; Zhang, Nong; Zheng, Xigui; Pan, Dongjiang

    2015-01-01

    Underground rock masses have shown a general trend of natural balance over billions of years of ground movement. Nonetheless, man-made underground constructions disturb this balance and cause rock stability failure. Fractured rock masses are frequently encountered in underground constructions, and this study aims to restore the strength of rock masses that have experienced considerable fracturing under uniaxial compression. Coal and sandstone from a deep-buried coal mine were chosen as experimental subjects; they were crushed by uniaxial compression and then carefully restored by a chemical adhesive called MEYCO 364 with an innovative self-made device. Finally, the restored specimens were crushed once again by uniaxial compression. Axial stress, axial strain, circumferential strain, and volumetric strain data for the entire process were fully captured and are discussed here. An acoustic emission (AE) testing system was adopted to cooperate with the uniaxial compression system to provide better definitions for crack closure thresholds, crack initiation thresholds, crack damage thresholds, and three-dimensional damage source locations in intact and restored specimens. Several remarkable findings were obtained. The restoration effects of coal are considerably better than those of sandstone because the strength recovery coefficient of the former is 1.20, whereas that of the latter is 0.33, which indicates that MEYCO 364 is particularly valid for fractured rocks whose initial intact peak stress is less than that of MEYCO 364. Secondary cracked traces of restored sandstone almost follow the cracked traces of the initial intact sandstone, and the final failure is mainly caused by decoupling between the adhesive and the rock mass. However, cracked traces of restored coal only partially follow the traces of intact coal, with the final failure of the restored coal being caused by both bonding interface decoupling and self-breakage in coal. Three-dimensional damage source

  20. Interpretation of massive sandstones in ephemeral fluvial settings: A case study from the Upper Candelária Sequence (Upper Triassic, Paraná Basin, Brazil)

    Science.gov (United States)

    Horn, Bruno Ludovico Dihl; Goldberg, Karin; Schultz, Cesar Leandro

    2018-01-01

    Ephemeral rivers display a wide range of upper- and lower-flow regime structures due to great flow-velocity changes during the floods. The development of flow structures in these setting is yet to be understood, especially in the formation of thick, massive sandstones. The Upper Triassic of Southern Gondwana was marked by a climate with great seasonal changes, yet there is no description of river systems with seasonal characteristics in Southern Gondwana. This work aims to characterize a ephemeral alluvial system of the Upper Triassic of the Paraná Basin. The characteristics of the deposits are discussed in terms of depositional processes through comparison with similar deposits from literature, flow characteristics and depositional signatures compared to flume experiments. The alluvial system is divided in four facies associations: (1) channels with wanning fill, characterized by low width/thickness ratio, tabular bodies, scour-and-fill structures with upper- and lower-flow regime bedforms; (2) channels with massive fill, characterized by low w/t ratio, sheet-like bodies, scour-and-fill structures with massive sandstones; (3) proximal sheetfloods, characterized by moderate w/t ratio, sheet-like bodies with upper- and lower-flow regime bedforms and (4) distal sheetfloods, characterized by high w/t ratio, sheet-like bodies with lower-flow regime bedforms. Evidence for the seasonal reactivation of the riverine system includes the scarcity of well-developed macroforms and presence of in-channel mudstones, thick intraformational conglomerates, and the occurrence of well- and poorly-preserved vertebrate bones in the same beds. The predominantly massive sandstones indicate deposition from a hyperconcentrated flow during abrupt changes in flow speed, caused by de-confinement or channel avulsion, whereas turbulent portions of the flow formed the upper- and lower-flow regime bedforms after the deposition of the massive layers. The upper portion of the Candelária Sequence

  1. Geochemical and Mineralogical Evaluation of CO2-Brine-Rock Experiments: Characterizing Porosity and Permeability Variations in the Cambrian Mount Simon Sandstone

    Science.gov (United States)

    Gonzalez, A. B.; Bowen, B. B.

    2012-12-01

    The Cambrian Mount Simon Sandstone has been targeted as a major reservoir for carbon dioxide storage in the Illinois Basin. The Mount Simon Sandstone's geologic setting, mature quartz to arkosic composition, reservoir thickness, and overlying Eau Claire Formation seal make it an attractive candidate for long-term storage potential of carbon dioxide. Injection of carbon dioxide has been shown to cause a range of chemical alterations that causes dissolution of existing minerals and precipitation of secondary phases that can alter the porosity and permeability of the reservoir. This study focuses on using detailed microscopic analysis of two compositionally and texturally different Mount Simon Sandstone samples from the Illinois Basin that were experimentally exposed to CO2-rich brines for 6 months at the NETL in collaboration with the Indiana Geological Survey. Our objective was to examine the experimental samples to determine how post-experiment mineralogical and geochemical alterations relate to porosity and permeability variations. Gazzi-Dickinson point counting of Vermillion County samples adjacent to experimental sample depths (5805 ft) show that the sample contains an average of 78% quartz, 15% feldspar, 2% lithics, and 5% porosity. Point count data of Knox County samples from 8642.5, 8542, and 8642.2 show the experimental sample has an average of 70% quartz, 22% feldspar, 4% lithics, and 3.9% porosity. Both samples were submerged in carbon dioxide-saturated brine synthesized to match the measured geochemistry of Mount Simon Sandstone pore water for six months at 24MPa and 90 degrees to replicate sequestration conditions. The results of the experiment for the Vermillion County sample revealed a significant decrease in permeability and porosity. However the Knox County sample had a minor increase in permeability and porosity. Geochemical analyses (IC, ICP-MS, and ICP-OES) of brine geochemistry before and after the experiment show a decrease in pH and an increase

  2. Strength Restoration of Cracked Sandstone and Coal under a Uniaxial Compression Test and Correlated Damage Source Location Based on Acoustic Emissions.

    Directory of Open Access Journals (Sweden)

    Xiaowei Feng

    Full Text Available Underground rock masses have shown a general trend of natural balance over billions of years of ground movement. Nonetheless, man-made underground constructions disturb this balance and cause rock stability failure. Fractured rock masses are frequently encountered in underground constructions, and this study aims to restore the strength of rock masses that have experienced considerable fracturing under uniaxial compression. Coal and sandstone from a deep-buried coal mine were chosen as experimental subjects; they were crushed by uniaxial compression and then carefully restored by a chemical adhesive called MEYCO 364 with an innovative self-made device. Finally, the restored specimens were crushed once again by uniaxial compression. Axial stress, axial strain, circumferential strain, and volumetric strain data for the entire process were fully captured and are discussed here. An acoustic emission (AE testing system was adopted to cooperate with the uniaxial compression system to provide better definitions for crack closure thresholds, crack initiation thresholds, crack damage thresholds, and three-dimensional damage source locations in intact and restored specimens. Several remarkable findings were obtained. The restoration effects of coal are considerably better than those of sandstone because the strength recovery coefficient of the former is 1.20, whereas that of the latter is 0.33, which indicates that MEYCO 364 is particularly valid for fractured rocks whose initial intact peak stress is less than that of MEYCO 364. Secondary cracked traces of restored sandstone almost follow the cracked traces of the initial intact sandstone, and the final failure is mainly caused by decoupling between the adhesive and the rock mass. However, cracked traces of restored coal only partially follow the traces of intact coal, with the final failure of the restored coal being caused by both bonding interface decoupling and self-breakage in coal. Three

  3. Origin and diagenesis of clay minerals in relation to sandstone paragenesis: An example in eolian dune reservoirs and associated rocks, Permian upper part of the Minnelusa Formation, Powder River basin, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Pollastro, R.M.; Schenk, C.J. (Geological Survey, Denver, CO (United States))

    1991-06-01

    Eolian dune sandstones are the principal reservoir rocks in the Permian upper part of the Minnelusa Formation, Powder River basin, Wyoming. These sandstones formed as shorelines retreated and dunes migrated across siliciclastic sabkhas. Sandstones are mainly quartzarenites; on average, clay minerals constitute about 5 wt.% the whole rock. Although present in minor amounts, clay minerals play an important role in the diagenetic evolution of these sandstones. Allogenic clay minerals are present in shaly rock fragments and laminae. Early infiltration of clays into porous sabkha sands commonly form characteristic menisei or bridges between framework grains or, when more extensive, form coatings or rims on grain surfaces. Authigenic clays include nearly pure smectite, mixed-layer illite/smectite (I/S), and late diagenetic illite and corrensite; these clay minerals are present as pore-lining cements. In addition to the deposition and neoformation of clay minerals throughout sandstone paragenesis, the conversion of smectite to illite occurred as temperatures increased with progressive burial. A temperature of 103C is calculated at a present depth of 3,200 m using a geothermal gradient of 30C/km and a mean annual surface temperature of 7C. After correction for uplift and erosion (250 m), the maximum calculated temperature for the conversion of all random I/S to ordered I/S is 100C. This calculated temperature is in excellent agreement with temperatures of 100-110C implied from I/S geothermometry.

  4. Virtual projects

    DEFF Research Database (Denmark)

    Svejvig, Per; Commisso, Trine Hald

    2012-01-01

    Virtual projects are common with global competition, market development, and not least the financial crisis forcing organizations to reduce their costs drastically. Organizations therefore have to place high importance on ways to carry out virtual projects and consider appropriate practices...... for performing these projects. This paper compares best practices with practiced practices for virtual projects and discusses ways to bridge the gap between them. We have studied eleven virtual projects in five Danish organizations and compared them with a predefined list of best practices compiled from...... that the best practice knowledge has not permeated sufficiently to the practice. Furthermore, the appropriate application of information and communication technology (ICT) remains a big challenge, and finally project managers are not sufficiently trained in organizing and conducting virtual projects...

  5. Project Temporalities

    DEFF Research Database (Denmark)

    Tryggestad, Kjell; Justesen, Lise; Mouritsen, Jan

    2013-01-01

    Purpose – The purpose of this paper is to explore how animals can become stakeholders in interaction with project management technologies and what happens with project temporalities when new and surprising stakeholders become part of a project and a recognized matter of concern to be taken...... into account. Design/methodology/approach – The paper is based on a qualitative case study of a project in the building industry. The authors use actor-network theory (ANT) to analyze the emergence of animal stakeholders, stakes and temporalities. Findings – The study shows how project temporalities can...... multiply in interaction with project management technologies and how conventional linear conceptions of project time may be contested with the emergence of new non-human stakeholders and temporalities. Research limitations/implications – The study draws on ANT to show how animals can become stakeholders...

  6. Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Riley; John Wicks; Christopher Perry

    2009-12-30

    The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian 'Clinton' sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test ('Huff-n-Puff') was conducted on a well in Stark County to test the injectivity in a 'Clinton'-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day 'soak' period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the 'Clinton' sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test

  7. Silurian "Clinton" Sandstone Reservoir Characterization for Evaluation of CO2-EOR Potential in the East Canton Oil Field, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Riley, Ronald; Wicks, John; Perry, Christopher

    2009-12-30

    The purpose of this study was to evaluate the efficacy of using CO2-enhanced oil recovery (EOR) in the East Canton oil field (ECOF). Discovered in 1947, the ECOF in northeastern Ohio has produced approximately 95 million barrels (MMbbl) of oil from the Silurian “Clinton” sandstone. The original oil-in-place (OOIP) for this field was approximately 1.5 billion bbl and this study estimates by modeling known reservoir parameters, that between 76 and 279 MMbbl of additional oil could be produced through secondary recovery in this field, depending on the fluid and formation response to CO2 injection. A CO2 cyclic test (“Huff-n-Puff”) was conducted on a well in Stark County to test the injectivity in a “Clinton”-producing oil well in the ECOF and estimate the dispersion or potential breakthrough of the CO2 to surrounding wells. Eighty-one tons of CO2 (1.39 MMCF) were injected over a 20-hour period, after which the well was shut in for a 32-day “soak” period before production was resumed. Results demonstrated injection rates of 1.67 MMCF of gas per day, which was much higher than anticipated and no CO2 was detected in gas samples taken from eight immediately offsetting observation wells. All data collected during this test was analyzed, interpreted, and incorporated into the reservoir characterization study and used to develop the geologic model. The geologic model was used as input into a reservoir simulation performed by Fekete Associates, Inc., to estimate the behavior of reservoir fluids when large quantities of CO2 are injected into the “Clinton” sandstone. Results strongly suggest that the majority of the injected CO2 entered the matrix porosity of the reservoir pay zones, where it diffused into the oil. Evidence includes: (A) the volume of injected CO2 greatly exceeded the estimated capacity of the hydraulic fracture and natural fractures; (B) there was a gradual injection and pressure rate build-up during the test; (C) there was a subsequent

  8. THE OHIO RIVER VALLEY CO2 STORAGE PROJECT - PRELIMINARY ASSESSMENT OF DEEP SALINE RESERVOIRS AND COAL SEAMS

    Energy Technology Data Exchange (ETDEWEB)

    Michael J. Mudd; Howard Johnson; Charles Christopher; T.S. Ramakrishnan, Ph.D.

    2003-08-01

    This report describes the geologic setting for the Deep Saline Reservoirs and Coal Seams in the Ohio River Valley CO{sub 2} Storage Project area. The object of the current project is to site and design a CO{sub 2} injection facility. A location near New Haven, WV, has been selected for the project. To assess geologic storage reservoirs at the site, regional and site-specific geology were reviewed. Geologic reports, deep well logs, hydraulic tests, and geologic maps were reviewed for the area. Only one well within 25 miles of the site penetrates the deeper sedimentary rocks, so there is a large amount of uncertainty regarding the deep geology at the site. New Haven is located along the Ohio River on the border of West Virginia and Ohio. Topography in the area is flat in the river valley but rugged away from the Ohio River floodplain. The Ohio River Valley incises 50-100 ft into bedrock in the area. The area of interest lies within the Appalachian Plateau, on the western edge of the Appalachian Mountain chain. Within the Appalachian Basin, sedimentary rocks are 3,000 to 20,000 ft deep and slope toward the southeast. The rock formations consist of alternating layers of shale, limestone, dolomite, and sandstone overlying dense metamorphic continental shield rocks. The Rome Trough is the major structural feature in the area, and there may be some faults associated with the trough in the Ohio-West Virginia Hinge Zone. The area has a low earthquake hazard with few historical earthquakes. Target injection reservoirs include the basal sandstone/Lower Maryville and the Rose Run Sandstone. The basal sandstone is an informal name for sandstones that overlie metamorphic shield rock. Regional geology indicates that the unit is at a depth of approximately 9,100 ft below the surface at the project site and associated with the Maryville Formation. Overall thickness appears to be 50-100 ft. The Rose Run Sandstone is another potential reservoir. The unit is located approximately 1

  9. Effects of H2S injection on the CO2-brine-sandstone interaction under 21MPa and 70°C.

    Science.gov (United States)

    Li, Chenyang; Zhang, Fengjun; Lyu, Cong; Hao, Jie; Song, Jianbin; Zhang, Shengyu

    2016-05-15

    In this study, laboratory experiments were conducted to investigate the influences of H2S injection on the capacity of CO2's solubility trapping and mineral trapping. Results demonstrated that the preferential dissolution of H2S gas into brine (compared with pure CO2) resulted in the decrease of pH, consequently inhibiting the CO2's solubility trappings to some extent. Then, the lower pH droved more severe corrosion of primary minerals, favored more secondary mineral to be formed. In addition, the discovery of pyrite demonstrated that H2S could precipitate by the formation of sulfide mineral trapping. As the secondary carbon sink minerals, ankerite and dawsonite were observed in the pure CO2-brine-sandstone interaction. However, there were no secondary carbonates found through the SEM images and EDS analyses, implied that the injection of H2S probably may partially inhibit the precipitation of Fe-bearing carbonate minerals such as ankerite in the CO2-H2S-brine-sandstone interaction in this short term experiments. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Revitalizing a mature oil play: Strategies for finding and producing unrecovered oil in Frio Fluvial-Deltaic Sandstone Reservoirs of South Texas

    Energy Technology Data Exchange (ETDEWEB)

    McRae, L.E.; Holtz, M.H.; Knox, P.R.

    1995-07-01

    The Frio Fluvial-Deltaic Sandstone Play of South Texas is one example of a mature play where reservoirs are being abandoned at high rates, potentially leaving behind significant unrecovered resources in untapped and incompletely drained reservoirs. Nearly 1 billion barrels of oil have been produced from Frio reservoirs since the 1940`s, yet more than 1.6 BSTB of unrecovered mobile oil is estimated to remain in the play. Frio reservoirs of the South Texas Gulf Coast are being studied to better characterize interwell stratigraphic heterogeneity in fluvial-deltaic depositional systems and determine controls on locations and volumes of unrecovered oil. Engineering data from fields throughout the play trend were evaluated to characterize variability exhibited by these heterogeneous reservoirs and were used as the basis for resource calculations to demonstrate a large additional oil potential remaining within the play. Study areas within two separate fields have been selected in which to apply advanced reservoir characterization techniques. Stratigraphic log correlations, reservoir mapping, core analyses, and evaluation of production data from each field study area have been used to characterize reservoir variability present within a single field. Differences in sandstone depositional styles and production behavior were assessed to identify zones with significant stratigraphic heterogeneity and a high potential for containing unproduced oil. Detailed studies of selected reservoir zones within these two fields are currently in progress.

  11. Wind directions predicted from global circulation models and wind directions determined from eolian sandstones of the western United States-A comparison

    Science.gov (United States)

    Parrish, Judith T.; Peterson, F.

    1988-01-01

    Wind directions for Middle Pennsylvanian through Jurassic time are predicted from global circulation models for the western United States. These predictions are compared with paleowind directions interpreted from eolian sandstones of Middle Pennsylvanian through Jurassic age. Predicted regional wind directions correspond with at least three-quarters of the paleowind data from the sandstones; the rest of the data may indicate problems with correlation, local effects of paleogeography on winds, and lack of resolution of the circulation models. The data and predictions suggest the following paleoclimatic developments through the time interval studied: predominance of winter subtropical high-pressure circulation in the Late Pennsylvanian; predominance of summer subtropical high-pressure circulation in the Permian; predominance of summer monsoonal circulation in the Triassic and earliest Jurassic; and, during the remainder of the Jurassic, influence of both summer subtropical and summer monsoonal circulation, with the boundary between the two systems over the western United States. This sequence of climatic changes is largely owing to paleogeographic changes, which influenced the buildup and breakdown of the monsoonal circulation, and possibly owing partly to a decrease in the global temperature gradient, which might have lessened the influence of the subtropical high-pressure circulation. The atypical humidity of Triassic time probably resulted from the monsoonal circulation created by the geography of Pangaea. This circulation is predicted to have been at a maximum in the Triassic and was likely to have been powerful enough to draw moisture along the equator from the ocean to the west. ?? 1988.

  12. On the Theory of Solitons of Fluid Pressure and Solute Density in Geologic Porous Media, with Applications to Shale, Clay and Sandstone

    Science.gov (United States)

    Caserta, A.; Kanivetsky, R.; Salusti, E.

    2017-11-01

    We here analyze a new model of t