WorldWideScience

Sample records for sands project multi-well

  1. Sand Lake WMD vegetation mapping project update

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Final report on the vegetation mapping project at Sand Lake Wetland Management District. This project is being completed by the use of SPRING software and ground...

  2. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  3. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  4. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-09-30

    The status of government sponsored projects undertaken to increase gas production from low-permeability gas sands of the western United States during August 1978 is summarized. Background information is given in the September 1977 Status Report, NVO/0655-100. One of the largest massive Hydraulic Fracture (MHF) treatment to date was performed on Gas Producing Enterprises Well No. CIGE 2-29. C.H. Atkinson, Western Gas Sands Project (WGSP) Manager and D.C. Bleakly, CER Corporation were observers. Oriented coring operations on the Mitchell Energy well, Muse-Duke No. 1 were observed by Atkinson and Bleakly near Mexia, Texas. The Fourth Annual Department of Energy Symposium on Enhanced Oil and Gas Recovery and Improved Drilling Methods was held on August 29-31, 1978 in Tulsa, Oklahoma. The USGS continued geological and geophysical studies in the four primary study areas. Low-level oblique photography of Tertiary and Cretaceous rocks exposed in the Rock Springs Uplift area was completed, and core from the J.C. Paine well in Montana was sampled for petrograhic analysis. Bartlesville Energy Technology Center continued work on the improved pressure coring system and anticipates completion of the project by September 30, 1978. Preliminary work began on the Parametric Analysis of MHF Test Data, an Engineering Study of Western Gas Sands, by Intercomp. The National Laboratories, funded by DOE are continuing their work in the area of research and development. The emphasis is on instrumentation systems, rock mechanics, mathematical modeling, and data analysis. The Mitchell Energy well, Muse Duke No. 1, has reached total depth and was logged on August 31, 1978. The DOE well test facility was moved from the RB-MHF 3 well in Colorado to Vernal, Utah for trailer modifications and checkout.

  5. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-11-30

    Progress of government-sponsored projects directed toward increasing gas production from the low-permeability gas sands of the western United States is summarized. A Technology Implementation Plan (TIP) meeting was held at the CER office in Las Vegas, Nevada, October 16--19 to initiate the implementation phase of the Enhanced Gas Recovery (EGR) working group activities. A WGSP Logging Program meeting was conducted on October 24, 1978, at CER offices to define the problems associated with logs in tight gas sands. CER personnel and the project manager attended a two-day course on the fundamentals of core and reservoir analysis in Denver, Colorado, and met with USGS personnel to discuss USGS work on the WGSP. A meeting was held to discuss a contract for coring a Twin Arrow well on the Douglas Creek Arch, Colorado. CER Corporation personnel attended the Geological Society of America Annual Meeting held in Toronto, Canada, October 23--27 and a Gas Stimulation Workshop at Sandia Laboratories in Albuquerque, New Mexico, October 11 and 12 to discuss recent mineback experiments conducted at the Nevada Test Site. Fiscal year 1979 projects initiated by USGS and the Energy Technology Centers and National Laboratories are progressing as scheduled. Mobil Research and Development Corporation fractured zone 8 of the F-31-13G well in Rio Blanco County, Colorado. Colorado Interstate Gas Company poured the concrete pad for the compresser expected to be delivered in December and were laying pipeline between the wells at month end. The Mitchell Energy well, Muse Duke No. 1 was flowing on test at a rate of 2,100 Mcfd and preparations proceeded to fracture the well on November 15 with approximately 1,000,000 gal of fluid and 3,000,000 lb of sand. Terra Tek completed laboratory analyses of cores taken from the Mitchell Energy well.

  6. Western Gas Sands Project: status report

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    Progress of the major government sponsored projects undertaken to increase gas production from low permeability gas sands of the western United States during March 1978 is summarized. The Bartlesville Energy Research Center (BERC) and participating National Laboratories, funded by DOE, are continuing their work in the area of research and development. The emphasis is on the development of new tools and instrumentation systems, rock mechanics, mathematical modeling and data analysis. Field Tests and demonstrations active in the Uinta and Piceance Basins include: Gas Producing Enterprises (GPE) Natural Buttes Unit Wells No. 9, 14, 18, 19, 20, 21 and 22, Mobil Research and Development Corporation, Well No. F-31-13G, and Rio Blanco Natural Gas Company, Well No. 498-4-1. Gas Producing Enterprises Natural Buttes Unit Well No. 9 was fractured on March 27, 1978. The treatment consisted of 554,000 pounds of sand and 349,000 gallons of gel. Mitchell Energy Corporation of Houston, Texas was awarded Department of Energy Contract EF-78-C-08-1547 on March 15, 1978. Field work under this contract is scheduled to begin on June 15, 1978, with the drilling of a new well.

  7. Western Gas Sands Project. Status report, 1 March-31 March 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The March, 1980 progress of the government-sponsored projects directed towards increasing gas production from the low permeability gas sands of the western United States is summarized in this report. A site for the multi-well experiment was approved by the industry review committee; drilling is expected by mid-summer. Bartlesville Energy Technology Center continued work on fracture conductivity, rock/fluid interaction, and log evaluation and interpretation techniques. Lawrence Livermore Laboratory continued experimental and theoretical work on hydraulic fracturing mechanics and analysis of well test data. Analysis of data obtained from a test of the borehole seismic unit by Sandia Laboratories continued. The DOE Well Test Facility continued bottom-hole pressure buildup measurements at the Colorado Interstate Gas Company Miller No. 1 well.

  8. New international developments in oil sands projects

    Energy Technology Data Exchange (ETDEWEB)

    Vercoe, J. [Fasken Martineau DuMoulin LLP, London (United Kingdom)

    2008-09-15

    Governments and oil companies from a variety of different countries are now working to create alternative oil and gas operations and the policies required to enable their financial success. The Africa Energy Commission was developed to coordinate policy and act as a framework for the African energy sector. Several large oil and gas operators have become involved in the creation of new contracts to develop training and human resources policies for the petroleum industry in Congo. Issues related to national oil companies and value creation in African countries are currently being studied by the World Bank. A biofuel alliance was recently signed between Congo and Brazil, and a Congo Forest Fund has also been created to help the inhabitants of the Congolese rainforest protect their environment. Congo is also offering opportunities for international companies to implement greenhouse gas (GHG) emission reduction programs to trade emission credits when requirements are satisfied. It was concluded that several African countries are suitable candidates for oil sands development. 1 fig.

  9. Western Gas Sands Project: stratigrapy of the Piceance Basin

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S. (comp.)

    1980-08-01

    The Western Gas Sands Project Core Program was initiated by US DOE to investigate various low permeability, gas bearing sandstones. Research to gain a better geological understanding of these sandstones and improve evaluation and stimulation techniques is being conducted. Tight gas sands are located in several mid-continent and western basins. This report deals with the Piceance Basin in northwestern Colorado. This discussion is an attempt to provide a general overview of the Piceance Basin stratigraphy and to be a useful reference of stratigraphic units and accompanying descriptions.

  10. Western gas sands project. Status report, July-August-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    The progress during July, August and September 1981 on increasing gas production from low permeability gas sands of the Western United States, is summarized in this edition of the WGSP Quarterly Status Report. During the quarter, CK GeoEnergy completed the field work in the Rifle Gap area near Rifle, Colorado, as well as the Draft Phase VI report covering the prognosis about reservoir geometry in the Multi-Well site area. The improved pressure coring system project, officially terminated Sept. 30. Accomplishments included increased capabilities for the pressure core barrel, improvements in the low invasion fluid plus various laboratory core intrusion studies and improved designs for PDC drill bits. At Lawrence Livermore National Laboratory, the P/sup 2/L/sup 2/ system described last quarter was evaluated further and the decision has been made to abandon further investigation. The Los Alamos National Laboratory Ceramics Materials Group is preparing to fabricate a ceramic sample with cylindrical pores of specified diameters. The NMR data on this type sample will contribute to a better understanding of the parameters affecting NMR relaxation rates in porous media. During the quarter, modifications were made in the operating and application software of the DOE Well Test Facility, which will support additions to the PDP-11/10 computer system. The Multi-Well Experiment well was spudded on Sept. 13 and by Sept. 30, total depth was 3358 ft. Coring operations are expected to begin at a depth of 4150 ft. At the Nevada Test Site, Sandia National Laboratories completed four additional coreholes for the Fluid Mechanics/ Proppant Transport Experiments.

  11. Western gas sands project. Status report, July-August-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    The progress during July, August and September 1981 on increasing gas production from low permeability gas sands of the Western United States, is summarized in this edition of the WGSP Quarterly Status Report. During the quarter, CK GeoEnergy completed the field work in the Rifle Gap area near Rifle, Colorado, as well as the Draft Phase VI report covering the prognosis about reservoir geometry in the Multi-Well site area. The improved pressure coring system project, officially terminated Sept. 30. Accomplishments included increased capabilities for the pressure core barrel, improvements in the low invasion fluid plus various laboratory core intrusion studies and improved designs for PDC drill bits. At Lawrence Livermore National Laboratory, the P/sup 2/L/sup 2/ system described last quarter was evaluated further and the decision has been made to abandon further investigation. The Los Alamos National Laboratory Ceramics Materials Group is preparing to fabricate a ceramic sample with cylindrical pores of specified diameters. The NMR data on this type sample will contribute to a better understanding of the parameters affecting NMR relaxation rates in porous media. During the quarter, modifications were made in the operating and application software of the DOE Well Test Facility, which will support additions to the PDP-11/10 computer system. The Multi-Well Experiment well was spudded on Sept. 13 and by Sept. 30, total depth was 3358 ft. Coring operations are expected to begin at a depth of 4150 ft. At the Nevada Test Site, Sandia National Laboratories completed four additional coreholes for the Fluid Mechanics/ Proppant Transport Experiments.

  12. Western Gas Sands Project. Status report, 1 January 1979--31 January 1979

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-01-01

    Aim is to increase gas production from the low-permeability gas sands of the western U.S. Progress is reported on: project management, resource assessment, R and D at various facilities, and field tests and demonstrations. (DLC)

  13. Examination of oil sands projects : gasification, CO{sub 2} emissions and supply costs

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, K. [Energy Resources Conservation Board, Calgary, AB (Canada)

    2008-10-15

    Non-conventional resources such as Alberta's oil sands are experiencing increased global interest because of the decline in global conventional oil and natural gas reserves. Bitumen extraction and upgrading is an energy intensive process. This paper provided a general discussion of Alberta's oil sands reserves, production and energy requirements. The paper discussed the application of different technologies to the oil sands, and in particular, the use of gasification as a method to produce bitumen-derived synthesis gas. Two oil sands projects currently under construction and implementing gasification technology were briefly described. The paper also provided a comparison of emission intensities from projects that employ gasification leading to a forecast of carbon dioxide equivalent emissions from the oil sands. The impact of Alberta's legislation and the federal framework on greenhouse gas emissions were also examined. Last, the paper discussed a supply cost methodology to compare an integrated extraction and upgrading project using gasification versus a similar project using a conventional steam methane reforming process (SMR). It was concluded that after comparing carbon dioxide emission intensities across different types of projects, the type of project that would be most heavily impacted by greenhouse gas emissions penalties was an in-situ extraction with an upgrading project that employed gasification technology. 36 refs., 5 tabs., 12 figs., 1 appendix.

  14. The future of the Canadian oil sands: Engineering and project management advances

    Energy Technology Data Exchange (ETDEWEB)

    Madden, Peter; Morawski, Jacek

    2010-09-15

    Production technology and project management developments in Canada's oil sands industry, in the context of AMEC's experience as EPCM service provider, are discussed. Effective project management systems and workfront planning are critical to achieve cost and schedule targets and optimum construction execution. Construction Work Packages divide work into discrete pieces and Construction Work Execution Plans influence scheduling of engineering and procurement deliverables. AMEC's Engineering Data Warehouse works with intelligent engineering design tools to ensure information related to a piece of equipment is consistent across all systems. HSSE systems are proactively developed and AMEC's progressive improvement in safety performance is demonstrated.

  15. Offshore Sand Resource Needs, Data Availability and Revaluation, and Beach Nourishment Projects in North Carolina

    Science.gov (United States)

    Conery, I.; Walsh, J. P.

    2016-12-01

    Storms and sea-level rise continue to impact the dynamic coastlines of North Carolina. Since the coastal region is economically critical to the state and yields numerous ecosystem services, many towns have planned beach nourishment projects. However, offshore sands compatible for nourishment are limited, and project costs fluctuate with borrow source proximity to the shoreline. Hurricane Sandy (2012) caused high water levels and waves resulting in localized overwash and erosion in the northeastern part of NC. In response, to effectively meet the rising nourishment demands for recovery after future storm events and for long-term resiliency, the Bureau of Ocean Energy Management (BOEM) recognized the need to compile and consolidate all geophysical and geologic information in federal waters (3-8 nm) along the East Coast states. A GIS database was created for NC using bathymetric, seismic reflection, sediment and other relevant data from federal, state and private entities. Information will be accessible to the public, coastal planners and managers to allow for informed decision-making and cost-effective project planning. Priority regions for seismic and core collection were determined based on data gaps and needs across the state. In addition, potential sand resource thickness and volume in northeastern NC were revaluated using comparisons of several overlapping datasets. Shoreline volume losses were calculated using long-term erosion rates and compared to historic and future nourishment projects. Finally, tourism-based revenue by town was evaluated and related to short and long-term nourishment costs.

  16. Geologic report on the Sand Wash Drilling Project, Moffat and Routt Counties, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Carter, T.E.; Wayland, T.E.

    1981-09-01

    The Sand Wash Basin Drilling Project comprises twenty-seven (27) drill holes located in Moffat and Routt Counties, northwest Colorado, having an aggregate depth of 26,107.5 feet (7957.6 m). The holes penetrate the Browns Park Formation of Miocene age, which is a tuffaceous continental sandstone deposited in fluvial, eolian, and lacustrine environments. Partly based on project drilling results, uranium potential resource estimates for this formation in the $50/lb U/sub 3/O/sub 8/ forward-cost category have been increased by 34,476 tons U/sub 3/O/sub 8/ (35,036 metric tons). Three areas between Maybell and Craig, Colorado, considered favorable for uranium occurrences were verified as favorable by project drilling, and a fourth favorable area northwest of Maybell has been expanded. In addition, project drilling results indicate two new favorable areas, one north and northwest and one south of Steamboat Springs, Colorado. Anomalous radioactivity was detected in drill holes in all six study areas of the project. The most important factor in concentrating significant amounts of uranium in the target formation appears to be the availability of gaseous or liquid hydrocarbons and/or hydrogen sulfide gas as reductants. Where subjacent formations supply these reductants to the Browns Park Formation, project drilling encountered 0.05 percent to 0.01 percent uranium concentrations. Potential, though unproven, sources of these reductants are believed to underlie parts of all six project study areas.

  17. Western Gas Sands Project. Status report, 1 March 1979--31 March 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Progress of the government-sponsored projects directed toward increasing gas production from low-permeability gas sands of the western United States is summarized. During March, National Laboratories and Energy Technology Centers generally progressed on schedule. Bartlesville Energy Technology Center continued work on fracture conductivity, rock-fluid interaction, and log evaluation techniques. Theoretical and experimental work on hydraulic fracturing mechanics and analysis of well test data continued at Lawrence Livermore Laboratory. Sandia Laboratories completed preparations for the NTS evaluation test of the borehole seismic system. M.D. Wood, Inc. monitored the formation of a hydraulic fracture in the Wattenburg gas field, Weld County, Colorado. Measurement of bottom-hole pressure in the Miller No. 1 and Sprague No. 1 wells for the CIG cyclic gas injection project continued. The Mitchell Energy Corporation Muse--Duke No. 1 was flowing 4,000 MCFD in March. Efforts to clean out Mobil's PCU F31-13G well continued.

  18. Multi-Well Potentials in Quantum Mechanics and Stochastic Processes

    Directory of Open Access Journals (Sweden)

    Victor P. Berezovoj

    2010-12-01

    Full Text Available Using the formalism of extended N=4 supersymmetric quantum mechanics we consider the procedure of the construction of multi-well potentials. We demonstrate the form-invariance of Hamiltonians entering the supermultiplet, using the presented relation for integrals, which contain fundamental solutions. The possibility of partial N=4 supersymmetry breaking is determined. We also obtain exact forms of multi-well potentials, both symmetric and asymmetric, using the Hamiltonian of harmonic oscillator as initial. The modification of the shape of potentials due to variation of parameters is also discussed, as well as application of the obtained results to the study of tunneling processes. We consider the case of exact, as well as partially broken N=4 supersymmetry. The distinctive feature of obtained probability densities and potentials is a parametric freedom, which allows to substantially modify their shape. We obtain the expressions for probability densities under the generalization of the Ornstein-Uhlenbeck process.

  19. Western Gas Sands Project. Status report, 1 September 1979-30 September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    This report summarizes progress of the government-sponsored projects directed toward increasing gas production from the low-permeability gas sands of the western United States. Bartlesville Energy Technology Center continued work on rock-fluid interaction and advanced logging techniques. Lawrence Livermore Laboratory continued experimental and theoretical work on hydraulic fracturing mechanics and analysis of well test data. Los Alamos Scientific Laboratory continued work on permeability and porosity determination of core samples and geological support studies. Sandia Laboratories continued work on their EGR Instrumentation and Diagnostic Program. Cyclic gas injection continued at Colorado Interstate Gas Company's Miller No. 1 and Sprague No. 1 wells. The DOE Well Test Facility is continuing to provide technical support to the Gas Research Institute/Rio Blanco Natural Gas MHF experiment. The Gas Producing Enterprises, Inc. Natural Buttes Unit wells continued to flow to sales. The Mitchell Energy Corporation Muse-Duke No. 1 was opened after a 28-day shut-in period. The hydraulic fracturing containment experiment continued for the Sandia-mineback program.

  20. Galactosylated cellulosic sponge for multi-well drug safety testing.

    Science.gov (United States)

    Nugraha, Bramasta; Hong, Xin; Mo, Xuejun; Tan, Looling; Zhang, Wenxia; Chan, Po-Mak; Kang, Chiang Huen; Wang, Yan; Beng, Lu Thong; Sun, Wanxin; Choudhury, Deepak; Robens, Jeffrey M; McMillian, Michael; Silva, Jose; Dallas, Shannon; Tan, Choon-Hong; Yue, Zhilian; Yu, Hanry

    2011-10-01

    Hepatocyte spheroids can maintain mature differentiated functions, but collide to form bulkier structures when in extended culture. When the spheroid diameter exceeds 200 μm, cells in the inner core experience hypoxia and limited access to nutrients and drugs. Here we report the development of a thin galactosylated cellulosic sponge to culture hepatocytes in multi-well plates as 3D spheroids, and constrain them within a macroporous scaffold network to maintain spheroid size and prevent detachment. The hydrogel-based soft sponge conjugated with galactose provided suitable mechanical and chemical cues to support rapid formation of hepatocyte spheroids with a mature hepatocyte phenotype. The spheroids tethered in the sponge showed excellent maintenance of 3D cell morphology, cell-cell interaction, polarity, metabolic and transporter function and/or expression. For example, cytochrome P450 (CYP1A2, CYP2B2 and CYP3A2) activities were significantly elevated in spheroids exposed to β-naphthoflavone, phenobarbital, or pregnenolone-16α-carbonitrile, respectively. The sponge also exhibits minimal drug absorption compared to other commercially available scaffolds. As the cell seeding and culture protocols are similar to various high-throughput 2D cell-based assays, this platform is readily scalable and provides an alternative to current hepatocyte platforms used in drug safety testing applications.

  1. National Assessment of Oil and Gas Project - Uinta-Piceance Province (020) Tar Sand Deposits

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Tar sands represent a significant source of hydrocarbons in the United States. Also known by several other names including bitumen-bearing rocks, natural asphalt,...

  2. Beach monitoring project Sand Key Phase II Beach nourishment program (North Redington Beach and Redington Shores) Post-Nourishment Report Part II Offshore Profiles and Wave Data

    OpenAIRE

    1989-01-01

    This study presents the third post-nourishment survey (January 1989) results for the Sand Key Phase II beach nourishment project carried out in June, 1988. The monitoring program to this beach nourishment project is a joint effort between the University of South Florida and University of Florida. The field surveys include a total of 26 profiles, encompassing approximately 3 miles of shoreline extending from DNR R-96 to R-1ll. The total calculated volume loss of sand in the n...

  3. Connecting onshore and offshore near-surface geology: Delaware's sand inventory project

    Science.gov (United States)

    Ramsey, K.W.; Jordan, R.R.; Talley, J.H.

    1999-01-01

    Beginning in 1988, the Delaware Geological Survey began a program to inventory on-land sand resources suitable for beach nourishment. The inventory included an assessment of the native beach textures using existing data and developing parameters of what would be considered suitable sand textures for Delaware's Atlantic beaches. An assessment of the economics of on-land sand resources was also conducted, and it was determined that the cost of the sand was competitive with offshore dredging costs. In addition, the sand resources were put into a geologic context for purposes of predicting which depositional environments and lithostratigraphic units were most likely to produce suitable sand resources. The results of the work identified several suitable on-land sand resource areas in the Omar and Beaverdam formations that were deposited in barrier-tidal delta and fluvial-estuarine environments, respectively. The identified on-land resources areas have not been utilized due to difficulties of truck transport and development pressures in the resource areas. The Delaware Geological Survey's participation in years 8, 9, and 10 of the Continental Margins Program was developed to extend the known resource areas onshore to offshore Delaware in order to determine potential offshore sand resources for beach nourishment. Years 8 and 9 involved primarily the collection of all available data on the offshore geology. These data included all seismic lines, surface grab samples, and cores. The data were filtered for those that had reliable locations and geologic information that could be used for geologic investigations. Year 10 completed the investigations onshore by construction of a geologic cross-section from data along the coast of Delaware from Cape Henlopen to Fenwick. This cross section identified the geologic units and potential sand resource bodies as found immediately along the coast. These units and resources are currently being extended offshore and tied to known and

  4. Initial spreading of a mega feeder nourishment : Observations of the Sand Engine pilot project

    NARCIS (Netherlands)

    de Schipper, Matthieu A.; de Vries, Sierd; Ruessink, Gerben|info:eu-repo/dai/nl/169093360; de Zeeuw, Roeland C.; Rutten, Jantien; van Gelder-Maas, Carola; Stive, Marcel J F

    2016-01-01

    Sand nourishments are a widely applied technique to increase beach width for recreation or coastal safety. As the size of these nourishments increases, new questions arise on the adaptation of the coastal system after such large unnatural shapes have been implemented. This paper presents the initial

  5. The Significance of Tax Incentives in Attracting Foreign Investment: Lessons from the Canadian Oil Sands Project

    Science.gov (United States)

    Febriana, Restika

    Tax incentives have been used by countries to stimulate foreign investment. Few countries doubt the effectiveness of tax incentives. Canada and Indonesia are among the many countries that offer tax incentives to attract investors. While Canada has a long history of using tax incentives to foster the development of the Alberta oil sands, Indonesia is just embarking on this strategy, especially in promoting foreign investment in remote areas. Drawing on the Canadian development of the Alberta oil sands, this thesis asks what lessons Indonesia can learn from that experience in relying on tax incentives to develop the industry. This thesis acknowledges that there are many important differences between Canada and Indonesia. Since most countries speak of using tax incentives to finance their petroleum industries, it is worth examining at least one instance of that strategy and see whether Indonesia can extract any thing of value from this examination.

  6. Beach Nourishment Techniques. Report 3. Typical U.S. Beach Nourishment Projects Using Offshore Sand Deposits.

    Science.gov (United States)

    1981-05-01

    Cooperative Beach Erosion Control Project at Presque Isle Peninsula, Erie , Pennsylvania ," Buffalo, N. Y. U. S. Army Engineer District, Charleston. 1963 (Mar...104 Presque Isle , Pa .. .. ..................... 109 REFERENCES .. ............................ 115 2A BEACH NOURISHMENT...RIVER COUNTY, FL T PRESQUE ISLE . PA Figure 1. Beach fill projects location map ...../ ...... studies have been authorized, or which are publicly owned

  7. Sand fly (Diptera, Psychodidae, Phlebotominae) abundance and diversity in areas affected by the São Francisco River transposition project in Ceará State, Brazil.

    Science.gov (United States)

    Dos Santos Silva, Júlia; Caranha, Lindemberg; Moura Santos, Fabrício Kássio; Dos Santos, Antonio Pereira; Rodrigues da Silva, Luiz Osvaldo; Ferreira Rangel, Elizabeth

    2017-08-29

    Entomological surveillance of sand fly vectors was carried out to support leishmaniasis prevention and control measures in areas affected by the São Francisco River Transposition Project. Sand flies were collected monthly between May 2011 and December 2014 in seven municipalities: Missão Velha, Brejo Santo, Lavras da Mangabeira, Iguatu, Mauriti, Jaguaribe and Jaguaretama, in dwellings, peridomicile and forest areas for three consecutive days, for a period of 12 h each day (18:00 to 06:00 h). Differences in species composition between sites were tested with Shannon's diversity index, the similarity between habitats was estimated by the Sørensen's qualitative similarity index and, for the most abundant species in each municipality, a standardized index of species abundance was applied. The influence of climatic factors on sand fly population densities was analyzed using Spearman's correlation coefficients. A total of 214,213 sand fly specimens belonging to 18 species were captured. The most abundant species in all municipalities was Lutzomyia longipalpis (Lutz & Neiva, 1912). The municipalities of Mauriti and Missão Velha stand out in terms of high species richness, with the latter exhibiting the greatest diversity. The number of sand flies in the Iguatu, Jaguaribe and Jaguaretama municipality was higher during the rainy months, whereas the populations declined in the drier months; the sand fly population density in other municipalities (Missão Velha, Brejo Santo, Lavras de Mangabeira and Mauriti) showed negative correlation with rainfall. This study confirms the presence of several Leishmania spp. vectors in the seven municipalities affected by the São Francisco River Transposition Project, with Lu. longipalpis being the most abundant species at all study sites. Vector populations in these municipalities should be monitored, ultimately to assess the associations between environmental changes and sand fly population dynamics and leishmaniasis transmission

  8. Two-dimensional novel optical lattices with multi-well traps for cold atoms or molecules

    Institute of Scientific and Technical Information of China (English)

    Junfa Lu; Xianming Ji; Jianping Yin

    2006-01-01

    We propose some new schemes to constitute two-dimensional (2D) array of multi-well optical dipole traps for cold atoms (or molecules) by using an optical system consisting of a binary π-phase grating and a 2D array of rectangle microlens. We calculate the intensity distribution of each optical well in 2D array of multi-well traps and its geometric parameters and so on. The proposed 2D array of multi-well traps can be used to form novel 2D optical lattices with cold atoms (or molecules), and form various novel optical crystals with cold atoms (or molecules), or to perform quantum computing and quantum information processing on an atom chip, even to realize an array of all-optical multi-well atomic (or molecular) BoseEinstein condensates (BECs) on an all-optical integrated atom (or molecule) chip.

  9. Fabrication of multi-well chips for spheroid cultures and implantable constructs through rapid prototyping techniques.

    Science.gov (United States)

    Lopa, Silvia; Piraino, Francesco; Kemp, Raymond J; Di Caro, Clelia; Lovati, Arianna B; Di Giancamillo, Alessia; Moroni, Lorenzo; Peretti, Giuseppe M; Rasponi, Marco; Moretti, Matteo

    2015-07-01

    Three-dimensional (3D) culture models are widely used in basic and translational research. In this study, to generate and culture multiple 3D cell spheroids, we exploited laser ablation and replica molding for the fabrication of polydimethylsiloxane (PDMS) multi-well chips, which were validated using articular chondrocytes (ACs). Multi-well ACs spheroids were comparable or superior to standard spheroids, as revealed by glycosaminoglycan and type-II collagen deposition. Moreover, the use of our multi-well chips significantly reduced the operation time for cell seeding and medium refresh. Exploiting a similar approach, we used clinical-grade fibrin to generate implantable multi-well constructs allowing for the precise distribution of multiple cell types. Multi-well fibrin constructs were seeded with ACs generating high cell density regions, as shown by histology and cell fluorescent staining. Multi-well constructs were compared to standard constructs with homogeneously distributed ACs. After 7 days in vitro, expression of SOX9, ACAN, COL2A1, and COMP was increased in both constructs, with multi-well constructs expressing significantly higher levels of chondrogenic genes than standard constructs. After 5 weeks in vivo, we found that despite a dramatic size reduction, the cell distribution pattern was maintained and glycosaminoglycan content per wet weight was significantly increased respect to pre-implantation samples. In conclusion, multi-well chips for the generation and culture of multiple cell spheroids can be fabricated by low-cost rapid prototyping techniques. Furthermore, these techniques can be used to generate implantable constructs with defined architecture and controlled cell distribution, allowing for in vitro and in vivo investigation of cell interactions in a 3D environment.

  10. First deep azimuthal electromagnetic resistivity and rotary steerable system geonavigation project result in complex sands for Bare field in Orinoco oil belt, Venezuela.

    Energy Technology Data Exchange (ETDEWEB)

    Machado, P.; Guzman, R.; Rojas, C.; Ache, A. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of); Hazboun, N.K.; Gonzalez, K. [Schlumberger, Piso (Venezuela, Bolivarian Republic of)

    2009-07-01

    Petroleos de Venezuela SA (PDVSA) in the Mucura District has been evaluating the use of new technologies that facilitate reaching reservoirs with complex geologies, such as thin sands, uncertain dip changes, and unconsolidated sands. The objective was to improve overall operational efficiency. PDVSA carried out a pilot project in a thin and unconsolidated package where a very high drilling rate was expected. The selected sand, known as TL sand in the Oficina formation of the Bare field, was initially planned for cold production, with expected implementation of thermal enhanced oil recovery processes in the future. This paper discussed the pilot project, with particular reference to geology; well placement for thermal processes; planning; and objectives and challenges of the high viscosity of the oil contained in the Bare field. Details of the pre-job modelling were presented along with updates of the geological model. Achievements were also presented. It was concluded that the greatest value that this technology brings resides in the ability to measure the boundary distance in real time, allowing for appropriate action to be taken. 3 refs., 19 figs.

  11. Fontainebleau Sand

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane

    2006-01-01

    The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand.......The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand....

  12. Modeling potential impacts of the Garrison Diversion Unit project on Sand Lake and Arrowwood National Wildlife Refuges: a feasibility analysis

    Science.gov (United States)

    Hamilton, David B.; Auble, Gregor T.; Farmer, Adrian H.; Roelle, James E.

    1987-01-01

    The Garrison Diversion Unit (GDU) of the Pick-Sloan Missouri Basin program was authorized in 1965, with the purpose of diverting Missouri River water to the James River for irrigation, municipal and industrial water supply, fish and wildlife habitat, recreation, and flood control. The project was reauthorized in 1986, with the specification that comprehensive studies be conducted to address a variety of issues. One of these ongoing studies addresses potential impacts of GDU construction and operation on lands of the National Wildlife Refuge (NWR) system, including Arrowwood and Sand Lake Refuges (the Refuges) on the James River. A number of concerns at these Refuges have been identified; the primary concerns addressed in this report include increased winter return flows, which would limit control of rough fish; increased turbidity during project construction, which would decrease production of sago pondweed; and increased water level fluctuations in the late spring and early summer, which would destroy the nests of some over-water nesting birds. The facilitated workshop described in this report was conducted February 18-20, 1987, under the joint sponsorship of the U.S. Bureau of Reclamation, the U.S. Fish and Wildlife Service, and the North Dakota Game and Fish Department. The primary objectives of the workshop were to evaluate the feasibility of using simulation modeling techniques to estimate GDU impacts on Arrowwood and Sand Lake Refuges and to suggest enhancements to the James River Refuge monitoring program. The workshop was structured around the formulation of four submodels: a Hydrology and Water Quality submodel to simulate changes in Refuge pool elevations, turnover rates, and water quality parameters (e.g., total dissolved solids, turbidity, dissolved oxygen, nutrients, water temperature, pesticides) due to GDU construction and operation; a Vegetation submodel to simulate concomitant changes in wetland communities (e.g., sago pondweed, wet meadows, deep

  13. A Serial Sample Loading System: Interfacing Multi-well plates with Microfluidic Devices

    OpenAIRE

    Rane, Tushar D.; Zec, Helena; Wang, Jeff Tza-Huei

    2012-01-01

    There is an increasing demand for novel high-throughput screening (HTS) technologies in the pharmaceutical and biotechnological industries. The robotic sample handling techniques currently used in these industries, although fast, are still limited to operating in multi-well plates with the sample volumes per reaction in the microliter regime. Digital microfluidics offers an alternative for reduction in sample volume consumption for HTS but lacks a reliable technique for transporting large num...

  14. Microstructured multi-well plate for three-dimensional packed cell seeding and hepatocyte cell culture.

    Science.gov (United States)

    Goral, Vasiliy N; Au, Sam H; Faris, Ronald A; Yuen, Po Ki

    2014-07-01

    In this article, we present a microstructured multi-well plate for enabling three-dimensional (3D) high density seeding and culture of cells through the use of a standard laboratory centrifuge to promote and maintain 3D tissue-like cellular morphology and cell-specific functionality in vitro without the addition of animal derived or synthetic matrices or coagulants. Each well has microfeatures on the bottom that are comprised of a series of ditches/open microchannels. The dimensions of the microchannels promote and maintain 3D tissue-like cellular morphology and cell-specific functionality in vitro. After cell seeding with a standard pipette, the microstructured multi-well plates were centrifuged to tightly pack cells inside the ditches in order to enhance cell-cell interactions and induce formation of 3D cellular structures during cell culture. Cell-cell interactions were optimized based on cell packing by considering dimensions of the ditches/open microchannels, orientation of the microstructured multi-well plate during centrifugation, cell seeding density, and the centrifugal force and time. With the optimized cell packing conditions, we demonstrated that after 7 days of cell culture, primary human hepatocytes adhered tightly together to form cord-like structures that resembled 3D tissue-like cellular architecture. Importantly, cell membrane polarity was restored without the addition of animal derived or synthetic matrices or coagulants.

  15. Namibia : triaxial test on sand

    DEFF Research Database (Denmark)

    Steenfelt, Jørgen S.; Jacobsen, Kim P.

    In connection with a harbour project the friction angle of a fine sand is required. On Friday 13 March 1998 the Danish Geotechnical Institute (DGI) delivered app. 2.5 kg sand for testing at the Geotechnical Engineering Laboratory, Aalborg University. The present Data Report summarises the results...

  16. Research on the Pueblo culture settlement system from the North American Southwest: Results of the Sand Canyon-Castle Rock Community Archaeological Project

    Directory of Open Access Journals (Sweden)

    Radosław Palonka

    2015-02-01

    Full Text Available Investigating ancient Pueblo culture from the North American Southwest is challenging task involving cooperationof scientists from different disciplines, mainly archaeology, history, anthropology, and linguistics. There isalso a large body of information in native oral tradition that has enormous potential for enriching our knowledgeof the past and our understanding of how Pueblo societies functioned. The paper focuses on one of the mostintriguing periods of Pueblo Indians culture, the thirteenth century A.D., in the central Mesa Verde region onpresent Utah-Colorado border. It was the time of great development of Pueblo societies and close to the centuryfall of the settlement system and total migration from the area to what is present-day Arizona and New Mexico.One of the projects in the area is Sand Canyon-Castle Rock Community Archaeological Project. The projectfocuses on analysis and reconstruction of the settlement structure and socio-cultural changes that took placein Pueblo culture during the thirteenth century A.D. in Sand Canyon, Rock Creek Canyon and several othersmall canyons located in one subarea within the Mesa Verde region, Colorado.

  17. Capture zone of a multi-well system in bounded peninsula-shaped aquifers.

    Science.gov (United States)

    Zarei-Doudeji, Somayeh; Samani, Nozar

    2014-08-01

    In this paper we present the equation of capture zone for multi-well system in peninsula-shaped confined and unconfined aquifers. The aquifer is rectangular in plan view, bounded along three sides, and extends to infinity at the fourth side. The bounding boundaries are either no-flow (impervious) or in-flow (constant head) so that aquifers with six possible boundary configurations are formed. The well system is consisted of any number of extraction or injection wells or combination of both with any flow rates. The complex velocity potential equations for such a well-aquifer system are derived to delineate the capture envelop. Solutions are provided for the aquifers with and without a uniform regional flow of any directions. The presented equations are of general character and have no limitations in terms of well numbers, positions and types, extraction/injection rate, and regional flow rate and direction. These solutions are presented in form of capture type curves which are useful tools in hands of practitioners to design in-situ groundwater remediation systems, to contain contaminant plumes, to evaluate the surface-subsurface water interaction and to verify numerical models.

  18. A parallel and quantitative cell migration assay using a novel multi-well-based device.

    Science.gov (United States)

    Quan, Qianghua; Zhang, Shuwen; Wang, Xudong; Ouyang, Qi; Wang, Yugang; Yang, Gen; Luo, Chunxiong

    2016-12-01

    Cell migration assays for different chemical environments are important for both scientists and clinicians searching for new therapeutics. In this study, we developed a multi-well-based microfluidic chip that has multiple units for different conditions. In each unit, cells can be patterned and then released to observe their migration. Automatic image analysis and model-based data processing were developed to describe the integrated cell migration assay precisely and quickly. As a demonstration, the migration behaviors of two types of cells in eight chemical conditions were studied. The results showed that supplementation with transforming growth factor-β(TGF-β) significantly promoted the migration of MCF-7 and MCF-10 A cells compared to several growth factors, such as Epidermal Growth Factor(EGF) and basic fibroblast growth factor(bFGF), as well as a control sample. Cells can migrate particularly fast with two or more mixed supplementary factors, such as TGF-β + bFGF + EGF, which indicated a synergy effect. Thus, this chip could be used to quantitatively observe cancer cell migration and demonstrated great potential for use in quantitative migration studies and chemical screening.

  19. Systematic analysis of in vitro cell rolling using a multi-well plate microfluidic system.

    Science.gov (United States)

    Levy, Oren; Anandakumaran, Priya; Ngai, Jessica; Karnik, Rohit; Karp, Jeffrey M

    2013-10-16

    A major challenge for cell-based therapy is the inability to systemically target a large quantity of viable cells with high efficiency to tissues of interest following intravenous or intraarterial infusion. Consequently, increasing cell homing is currently studied as a strategy to improve cell therapy. Cell rolling on the vascular endothelium is an important step in the process of cell homing and can be probed in-vitro using a parallel plate flow chamber (PPFC). However, this is an extremely tedious, low throughput assay, with poorly controlled flow conditions. Instead, we used a multi-well plate microfluidic system that enables study of cellular rolling properties in a higher throughput under precisely controlled, physiologically relevant shear flow. In this paper, we show how the rolling properties of HL-60 (human promyelocytic leukemia) cells on P- and E-selectin-coated surfaces as well as on cell monolayer-coated surfaces can be readily examined. To better simulate inflammatory conditions, the microfluidic channel surface was coated with endothelial cells (ECs), which were then activated with tumor necrosis factor-α (TNF-α), significantly increasing interactions with HL-60 cells under dynamic conditions. The enhanced throughput and integrated multi-parameter software analysis platform, that permits rapid analysis of parameters such as rolling velocities and rolling path, are important advantages for assessing cell rolling properties in-vitro. Allowing rapid and accurate analysis of engineering approaches designed to impact cell rolling and homing, this platform may help advance exogenous cell-based therapy.

  20. Uniform electric field generation in circular multi-well culture plates using polymeric inserts

    Science.gov (United States)

    Tsai, Hsieh-Fu; Cheng, Ji-Yen; Chang, Hui-Fang; Yamamoto, Tadashi; Shen, Amy Q.

    2016-01-01

    Applying uniform electric field (EF) in vitro in the physiological range has been achieved in rectangular shaped microchannels. However, in a circular-shaped device, it is difficult to create uniform EF from two electric potentials due to different electrical resistances originated from the length difference between the diameter of the circle and the length of any parallel chord of the bottom circular chamber where cells are cultured. To address this challenge, we develop a three-dimensional (3D) computer-aided designed (CAD) polymeric insert to create uniform EF in circular shaped multi-well culture plates. A uniform EF with a coefficient of variation (CV) of 1.2% in the 6-well plate can be generated with an effective stimulation area percentage of 69.5%. In particular, NIH/3T3 mouse embryonic fibroblast cells are used to validate the performance of the 3D designed Poly(methyl methacrylate) (PMMA) inserts in a circular-shaped 6-well plate. The CAD based inserts can be easily scaled up (i.e., 100 mm dishes) to further increase effective stimulation area percentages, and also be implemented in commercially available cultureware for a wide variety of EF-related research such as EF-cell interaction and tissue regeneration studies. PMID:27193911

  1. Uniform electric field generation in circular multi-well culture plates using polymeric inserts

    Science.gov (United States)

    Tsai, Hsieh-Fu; Cheng, Ji-Yen; Chang, Hui-Fang; Yamamoto, Tadashi; Shen, Amy Q.

    2016-05-01

    Applying uniform electric field (EF) in vitro in the physiological range has been achieved in rectangular shaped microchannels. However, in a circular-shaped device, it is difficult to create uniform EF from two electric potentials due to different electrical resistances originated from the length difference between the diameter of the circle and the length of any parallel chord of the bottom circular chamber where cells are cultured. To address this challenge, we develop a three-dimensional (3D) computer-aided designed (CAD) polymeric insert to create uniform EF in circular shaped multi-well culture plates. A uniform EF with a coefficient of variation (CV) of 1.2% in the 6-well plate can be generated with an effective stimulation area percentage of 69.5%. In particular, NIH/3T3 mouse embryonic fibroblast cells are used to validate the performance of the 3D designed Poly(methyl methacrylate) (PMMA) inserts in a circular-shaped 6-well plate. The CAD based inserts can be easily scaled up (i.e., 100 mm dishes) to further increase effective stimulation area percentages, and also be implemented in commercially available cultureware for a wide variety of EF-related research such as EF-cell interaction and tissue regeneration studies.

  2. SWAD: inherent photon counting performance of amorphous selenium multi-well avalanche detector

    Science.gov (United States)

    Stavro, Jann; Goldan, Amir H.; Zhao, Wei

    2016-03-01

    Photon counting detectors (PCDs) have the potential to improve x-ray imaging, however they are still hindered by several performance limitations and high production cost. By using amorphous Selenium (a-Se) the cost of PCDs can be significantly reduced compared to crystalline materials and enable large area detector fabrication. To overcome the problem of low carrier mobility and low charge conversion gain in a-Se, we are developing a novel direct conversion a- Se field-Shaping multi-Well Avalanche Detector (SWAD). SWAD circumvents the charge transport limitation by using a Frisch grid built within the readout circuit, reducing charge collection time to ~200 ns. Field shaping permits depth independent avalanche gain in wells, resulting in total conversion gain that is comparable to Si and CdTe. In the present work we investigate the effects of charge sharing and energy loss to understand the inherent photon counting performance for SWAD at x-ray energies used in breast imaging applications (20-50keV). The energy deposition profile for each interacting x-ray was determined with Monte Carlo simulation. For the energy ranges we are interested in, photoelectric interaction dominates, with a k-fluorescence yield of approximately 60%. Using a monoenergetic 45 keV beam incident on a target pixel in 400um of a-Se, our results show that only 20.42 % and 22.4 % of primary interacting photons have kfluorescence emissions which escape the target pixel for 100um and 85um pixel sizes respectively, demonstrating SWAD's potential for high spatial resolution applications.

  3. Laboratory Seismic Monitoring and X-ray CT imaging of Supercritical CO2 Injection in Reservoir Sand: WESTCAB King Island Project

    Science.gov (United States)

    Nakashima, S.; Kneafsey, T. J.; Nakagawa, S.; Harper, E. J.

    2013-12-01

    The Central Valley of California contains promising locations for on-shore geologic CO2 storage. DOE's WESTCARB (West Coast Regional Carbon Sequestration Partnership) project drilled and cored a borehole (Citizen Green Well) at King Island (near Stockton, CA) to study the CO2 storage capability of saline and gas-bearing formations in the southwestern Sacramento Basin. Potential reservoirs encountered in the borehole include Domengine, Mokelumne River (primary target), and Top Starkey formations. In anticipation of geophysical monitoring of possible CO2 injection into this particular borehole and of the long-term migration of the CO2, we conducted small-scale CO2 injection experiments on three core samples retrieved from the well (Mokelumne River sand A and B) and from a mine outcrop (Domengine sandstone). During the experiment, a jacketed core sample (diameter 1.5 inches, length 4.0-6.0 inches) saturated with brine- (1% NaCl aq.) was confined within a pressure vessel via compressed nitrogen to 3,500-4,000psi, and supercritical CO2 was injected into the core at 2,000-2,500psi and 45-60 degrees C. The CO2 pressure and temperature were adjusted so that the bulk elastic modulus of the CO2 was close to the expected in-situ modulus--which affects the seismic properties most--while keeping the confining stress within our experimental capabilities. After the CO2 broke through the core, fresh brine was re-injected to remove the CO2 by both displacement and dissolution. Throughout the experiment, seismic velocity and attenuation of the core sample were measured using the Split Hopkinson Resonant Bar method (Nakagawa, 2012, Rev. Sci. Instr.) at near 1 kHz (500Hz--1.5 kHz), and the CO2 distribution determined via x-ray CT imaging. In contrast to relatively isotropic Mokelumne sand A, Domengine sandstone and Mokelumne sand B cores exhibited CO2 distributions strongly controlled by the bedding planes. During the CO2 injection, P-wave velocity and attenuation of the layered

  4. Sands styrke

    DEFF Research Database (Denmark)

    Jacobsen, H. Moust; Jørgensen, Mogens B.; Poulsen, H. Serup

    1975-01-01

    På grundlag af triaxialforsøg med D=7 og 20 cm og varierende højde på løse og faste lejringer af Blokhussand kan effekten af varierende højde-breddeforhold og spændingsniveau samt skalaeffekten bestemmes. Ved sammenligning med pladeforsøg med overfladelast op til 8 t/m2 kan den almindelige fremga...... fremgangsmåde ved bæreevneberegninger på sand undersøges....

  5. Fresh groundwater resources in a large sand replenishment

    NARCIS (Netherlands)

    Huizer, Sebastian; Oude Essink, G.H.P.; Bierkens, Marc

    2016-01-01

    The anticipation of sea-level rise and increases in extreme weather conditions has led to the initiation of an innovative coastal management project called the Sand Engine. In this pilot project a large volume of sand (21.5 million m3) – also called sand replenishment or nourishment – was placed on

  6. Further Evaluation of DNT Hazard Screening using Neural Networks from Rat Cortical Neurons on Multi-well Microelectrode Arrays

    Science.gov (United States)

    Thousands of chemicals have not been characterized for their DNT potential. Due to the need for DNT hazard identification, efforts to develop screening assays for DNT potential is a high priority. Multi-well microelectrode arrays (MEA) measure the spontaneous activity of electr...

  7. Evaluation of the Neuroactivity of ToxCast Compounds Using Multi-well Microelectrode Array Recordings in Primary Cortical Neurons

    Science.gov (United States)

    Evaluation of the Neuroactivity of ToxCast Compounds Using Multi-well Microelectrode Array Recordings in Primary Cortical Neurons P Valdivia1, M Martin2, WR LeFew3, D Hall3, J Ross1, K Houck2 and TJ Shafer3 1Axion Biosystems, Atlanta GA and 2NCCT, 3ISTD, NHEERL, ORD, US EPA, RT...

  8. Further Evaluation of DNT Hazard Screening using Neural Networks from Rat Cortical Neurons on Multi-well Microelectrode Arrays

    Science.gov (United States)

    Thousands of chemicals have not been characterized for their DNT potential. Due to the need for DNT hazard identification, efforts to develop screening assays for DNT potential is a high priority. Multi-well microelectrode arrays (MEA) measure the spontaneous activity of electr...

  9. Tar sand

    Energy Technology Data Exchange (ETDEWEB)

    McLendon, T.R.; Bartke, T.C.

    1990-01-01

    Research on tar sand is briefly discussed. The research program supported by the US Department of Energy (DOE) includes a variety of surface extraction schemes. The University of Utah has process development units (PDU) employing fluidized bed, hot, water-assisted, and fluidized-bed/heat-pipe, coupled combustor technology. Considerable process variable test data have been gathered on these systems: (1) a rotary kiln unit has been built recently; (2) solvent extraction processing is being examined; and (3) an advanced hydrogenation upgrading scheme (hydropyrolysis) has been developed. The University of Arkansas, in collaboration with Diversified Petroleum, Inc., has been working on a fatty acid, solvent extraction process. Oleic acid is the solvent/surfactant. Solvent is recovered by adjusting processing fluid concentrations to separate without expensive operations. Western Research Institute has a PDU-scale scheme called the Recycle Oil Pyrolysis and Extraction (ROPE) process, which combines solvent (hot recycle bitumen) and pyrolytic extraction. 14 refs., 19 figs.

  10. Geostatistical modeling of facies, bitumen grade and particle size distribution for the Joslyn oil sand open pit mine project

    Energy Technology Data Exchange (ETDEWEB)

    Babak, Olena; Insalaco, Enzo; Mittler, Andreas [Total EandP Canada Ltd. (Canada)

    2011-07-01

    The Joslyn North Mine Project is currently in the pre-development stage; the aim of this study is to use different available data to draw a geological model of facies, bitumen grade, full particle size distribution (PSD) and ore/waste discrimination. The study was conducted with the database of around 800 wells, stochastic, indicator and Gaussian simulations were performed along with a sensitivity study. Results demonstrated the importance of some parameters for evaluating grade cases including variogram uncertainty, sampling limitations and errors in geostatistical workflow. In addition, modeling the full PSD dataset was shown to be useful. This study demonstrated how to use available database through an overall workflow to develop case scenarios for bitumen in place in ore and characterize the ore material.

  11. It's in the sand

    OpenAIRE

    Mitchell, Clive

    2016-01-01

    Sand is sand isn’t it? Sand gets everywhere but rather than a nuisance it is a valuable, high-purity raw material. Clive Mitchell, Industrial Minerals Specialist at the British Geological Survey (BGS), talks us through what sand is, what it can be used for and how to find it. His exploration of sand takes us from the deserts of Arabia to the damp sand pits of Mansfield!

  12. Application of design projects developed by Foundry Research Institute in Krakow in construction of integrated stand for processing and reclamation of moulding sands

    Directory of Open Access Journals (Sweden)

    I. Izdebska-Szanda

    2008-04-01

    Full Text Available The article is devoted to the description of a new integrated system for processing and reclamation of moulding and core sands using the equipment developed by Foundry Research Institute in Krakow. The idea and operation of a complex stand, which allows for co-existence of three routes of material circulation, i.e. system sand, new sand and reclaim, with maximum utilisation of the existing equipment have been presented. Various aspects, economical and ecological, of the proposed design have been discussed.

  13. In vitro maturation system for individual culture of bovine oocytes using micro-volume multi-well plate.

    Science.gov (United States)

    Nagano, Masashi; Kang, Sung-Sik; Koyama, Keisuke; Huang, Weiping; Yanagawa, Yojiro; Takahashi, Yoshiyuki

    2013-11-01

    As a preliminary study for the development of individual in vitro maturation (IVM) culture of bovine oocytes, a multi-well (MW) plate was used. Maturation, fertilization and development to blastocysts were examined and compared with those of IVM oocytes cultured in 50-microl droplets in groups and in 10-microl droplets individually. The maturation rates were similar in all experimental groups. Normal fertilization rates in MW and 50-microl droplets were similar, but lower in 10-microl droplets (p culture.

  14. Industrial sand and gravel

    Science.gov (United States)

    Dolley, T.P.

    2013-01-01

    Domestic production of industrial sand and gravel in 2012 was about 49.5 Mt (55 million st), increasing 13 percent compared with that of 2011. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  15. Eastern Scheldt Sand, Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Andersen, A. T; Madsen, E. B.; Schaarup-Jensen, A. L.

    The present data report contains data from 13 drained triaxial tests, performed on two different sand types in the Soil Mechanics Laboratory at Aalborg University in March, 1997. Two tests have been performed on Baskarp Sand No. 15, which has already ken extensively tested in the Soil Mechanics...... Laboratory. The remaining 11 triaxial tests have ben performed on Eastern Scheldt Sand, which is a material not yet investigated at the Soil Mechanics Laboratory. In the first pari of this data report, the characteristics of the two sand types in question will be presented. Next, a description...

  16. Global sand trade is paving the way for a tragedy of the sand commons

    Science.gov (United States)

    Torres, A.; Brandt, J.; Lear, K.; Liu, J.

    2016-12-01

    In the first 40 years of the 21st century, planet Earth is highly likely to experience more urban land expansion than in all of history, an increase in transportation infrastructure by more than a third, and a great variety of land reclamation projects. While scientists are beginning to quantify the deep imprint of human infrastructure on biodiversity at large scales, its off-site impacts and linkages to sand mining and trade have been largely ignored. Sand is the most widely used building material in the world. With an ever-increasing demand for this resource, sand is being extracted at rates that far exceed its replenishment, and is becoming increasingly scarce. This has already led to conflicts around the world and will likely lead to a "tragedy of the sand commons" if sustainable sand mining and trade cannot be achieved. We investigate the environmental and socioeconomic interactions over large distances (telecouplings) of infrastructure development and sand mining and trade across diverse systems through transdisciplinary research and the recently proposed telecoupling framework. Our research is generating a thorough understanding of the telecouplings driven by an increasing demand for sand. In particular, we address three main research questions: 1) Where are the conflicts related to sand mining occurring?; 2) What are the major "sending" and "receiving" systems of sand?; and 3) What are the main components (e.g. causes, effects, agents, etc.) of telecoupled systems involving sand mining and trade? Our results highlight the role of global sand trade as a driver of environmental degradation that threatens the integrity of natural systems and their capacity to deliver key ecosystem services. In addition, infrastructure development and sand mining and trade have important implications for other sustainability challenges such as over-fishing and global warming. This knowledge will help to identify opportunities and tools to better promote a more sustainable use

  17. Choosing an optimum sand control method

    Directory of Open Access Journals (Sweden)

    Ehsan Khamehchi

    2015-06-01

    Full Text Available Formation sand control is always one of the main concerns of production engineers. There are some different methods to prevent sand production. Choosing a method for preventing formation sand production depends on different reservoir parameters and politic and economic conditions. Sometimes, economic and politic conditions are more effective to choose an optimum than reservoir parameters. Often, simultaneous investigation of politic and economic conditions with reservoir parameters has different results with what is expected. So, choosing the best sand control method is the result of thorough study. Global oil price, duration of sand control project and costs of necessary equipment for each method as economic and politic conditions and well productivity index as reservoir parameter are the main parameters studied in this paper.

  18. Influence green sand system by core sand additions

    OpenAIRE

    N. Špirutová; J. Beňo; V. Bednářová; J. Kříž; M. Kandrnál

    2012-01-01

    Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron) are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this co...

  19. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Borup, Marianne; Hedegaard, Jette

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...... and biotit. Mainly the sand will be used for tests concerning the development og the theory of building up pore pressure in sand, L. B. Ibsen 1993....

  20. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...

  1. Hydraulic fracture model and diagnostics verification at GRI/DOE multi-site projects and tight gas sand program support. Final report, July 28, 1993--February 28, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, J.E.

    1997-12-31

    The Mesaverde Group of the Piceance Basin in western Colorado has been a pilot study area for government-sponsored tight gas sand research for over twenty years. Early production experiments included nuclear stimulations and massive hydraulic fracture treatments. This work culminated in the US Department of Energy (DOE)`s Multiwell Experiment (MWX), a field laboratory designed to study the reservoir and production characteristics of low permeability sands. A key feature of MWX was an infrastructure which included several closely spaced wells that allowed detailed characterization of the reservoir through log and core analysis, and well testing. Interference and tracer tests, as well as the use of fracture diagnostics gave further information on stimulation and production characteristics. Thus, the Multiwell Experiment provided a unique opportunity for identifying the factors affecting production from tight gas sand reservoirs. The purpose of this operation was to support the gathering of field data that may be used to resolve the number of unknowns associated with measuring and modeling the dimensions of hydraulic fractures. Using the close-well infrastructure at the Multiwell Site near Rifle, Colorado, this operation focused primarily on the field design and execution of experiments. The data derived from the experiments were gathered and analyzed by DOE team contractors.

  2. 长距离胶带机在水电工程砂石料系统工程中的应用%Application of Long-distance Rubber Belt Conveyor in Aggregate & Sand Processing System of Hydropower Projects

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    文章从长距离胶带机的设计、施工要求及在国内外各个工地的砂石料生产中的应用等方面,对长距离胶带机的使用进行综合性比较,论证了长距离胶机在水电工程中应用的推广意义。%Application of the long-distance rubber belt conveyor is comprehensively compared, and the development significance of the conveyor in the hydropower projects is demonstrated in terms of its design, construction requirements and its applications in the aggregate&sand processing operation on the hydropower projects site both at home and abroad.

  3. Influence green sand system by core sand additions

    Directory of Open Access Journals (Sweden)

    N. Špirutová

    2012-01-01

    Full Text Available Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this contribution is: “How the green sand systems are influenced by core sands?”This effect is considered by determination of selected technological properties and degree of green sand system re-bonding. From the studies, which have been published yet, there is not consistent opinion on influence of core sand dilution on green sand system properties. In order to simulation of the effect of core sands on the technological properties of green sands, there were applied the most common used technologies of cores production, which are based on bonding with phenolic resin. Core sand concentration added to green sand system, was up to 50 %. Influence of core sand dilution on basic properties of green sand systems was determined by evaluation of basic industrial properties: moisture, green compression strength and splitting strength, wet tensile strength, mixture stability against staling and physical-chemistry properties (pH, conductivity, and loss of ignition. Ratio of active betonite by Methylene blue test was also determined.

  4. Developing a Sand Management Plan for Galveston Island

    Science.gov (United States)

    2015-10-16

    US Army Corps of Engineers BUILDING STRONG® Developing a Sand Management Plan for Galveston Island Ashley E. Frey, P. E. Research Civil...GenCade Alternatives • Sand Management Alternatives and Plan • Beach Nourishment Project 2 Innovative solutions for a safer, better world...BUILDING STRONG® Problem Statement/Approach Recommend a long-term plan of actions to better manage sands on Galveston Island Initial Tasks

  5. Sands cykliske styrke

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo

    1992-01-01

    Sands cykliske styrke kan beskrives ved Cyclic Liquefaction, Mobilisering, Stabilization og Instant Stabilization. I artiklen beskrives hvorfor Stabilization og Instant Stabilization ikke observeres, når sands udrænede styrke undersøges i triaxial celler, der anvender prøver med dobbelt prøvehøjde....

  6. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Bødker, Lars Bødker

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...

  7. Sand and Gravel Deposits

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset is a statewide polygon coverage of sand, gravel, and stone resources. This database includes the best data available from the VT Agency of Natural...

  8. Sand and Gravel Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  9. Method of Relating Grain Size Distribution to Hydraulic Conductivity in Dune Sands to Assist in Assessing Managed Aquifer Recharge Projects: Wadi Khulays Dune Field, Western Saudi Arabia

    KAUST Repository

    Lopez Valencia, Oliver M.

    2015-11-12

    Planning for use of a dune field aquifer for managed aquifer recharge (MAR) requires that hydraulic properties need to be estimated over a large geographic area. Saturated hydraulic conductivity of dune sands is commonly estimated from grain size distribution data by employing some type of empirical equation. Over 50 samples from the Wadi Khulays dune field in Western Saudi Arabia were collected and the grain size distribution, porosity, and hydraulic conductivity were measured. An evaluation of 20 existing empirical equations showed a generally high degree of error in the predicted compared to the measured hydraulic conductivity values of these samples. Statistical analyses comparing estimated versus measured hydraulic conductivity demonstrated that there is a significant relationship between hydraulic conductivity and mud percentage (and skewness). The modified Beyer equation, which showed a generally low prediction error, was modified by adding a second term fitting parameter related to the mud concentration based on 25 of the 50 samples analyzed. An inverse optimization process was conducted to quantify the fitting parameter and a new empirical equation was developed. This equation was tested against the remaining 25 samples analyzed and produced an estimated saturated hydraulic conductivity with the lowest error of any empirical equation. This methodology can be used for large dune field hydraulic conductivity estimation and reduce planning costs for MAR systems.

  10. Method of Relating Grain Size Distribution to Hydraulic Conductivity in Dune Sands to Assist in Assessing Managed Aquifer Recharge Projects: Wadi Khulays Dune Field, Western Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Oliver M. Lopez

    2015-11-01

    Full Text Available Planning for use of a dune field aquifer for managed aquifer recharge (MAR requires that hydraulic properties need to be estimated over a large geographic area. Saturated hydraulic conductivity of dune sands is commonly estimated from grain size distribution data by employing some type of empirical equation. Over 50 samples from the Wadi Khulays dune field in Western Saudi Arabia were collected and the grain size distribution, porosity, and hydraulic conductivity were measured. An evaluation of 20 existing empirical equations showed a generally high degree of error in the predicted compared to the measured hydraulic conductivity values of these samples. Statistical analyses comparing estimated versus measured hydraulic conductivity demonstrated that there is a significant relationship between hydraulic conductivity and mud percentage (and skewness. The modified Beyer equation, which showed a generally low prediction error, was modified by adding a second term fitting parameter related to the mud concentration based on 25 of the 50 samples analyzed. An inverse optimization process was conducted to quantify the fitting parameter and a new empirical equation was developed. This equation was tested against the remaining 25 samples analyzed and produced an estimated saturated hydraulic conductivity with the lowest error of any empirical equation. This methodology can be used for large dune field hydraulic conductivity estimation and reduce planning costs for MAR systems.

  11. Vestled - Hvide Sande

    DEFF Research Database (Denmark)

    Juel-Christiansen, Carsten; Hesselbjerg, Marianne; Schønherr, Torben

    2009-01-01

    Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side......Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side...

  12. MECHANICAL REGENERATION OF SAND WASTE

    Directory of Open Access Journals (Sweden)

    D. I. Gnir

    2005-01-01

    Full Text Available The experimental activation of the sand regenerator of the firm SINTO is carried out at ОАО “MZOO". It is shown that sand grains are cleared from films of binding agents, that allows to use the treated sand for preparation of agglutinant and core sands.

  13. Characterization of ToxCast Phase II compounds disruption of spontaneous network activity in cortical networks grown on multi-well microelectrode array (mwMEA) plates.

    Science.gov (United States)

    The development of multi-well microelectrode array (mwMEA) systems has increased in vitro screening throughput making them an effective method to screen and prioritize large sets of compounds for potential neurotoxicity. In the present experiments, a multiplexed approach was used...

  14. 砂砾石土筑堤技术在北汝河堤防治理工程中的应用%Application of Sand and Gravel Soil Embankment Technology in Beiru River Dike Governance Project

    Institute of Scientific and Technical Information of China (English)

    刘美义; 金鑫

    2012-01-01

      堤防是世界上最早广为采用的一种重要防洪工程,筑堤是防御洪水泛滥、保护居民和工农业生产的主要措施。少占土地、就地取材是堤防工程设计的重要原则。对北汝河治理工程利用河床砂砾石筑堤技术进行了研究,提出了砂性土筑堤技术一般原则和应该注意的问题。%  Dike is an important flood control project adopted firstly and widely all over the world, and embankment is the main measure for defending flooding, protecting citizens, and industrial and agricultural production. Occupation of less land, and adoption of local resources are important principles in dike engineering design. The adoption of sand and gravel embankment technology on the riverbed of Beiru River governance project is studied, and the general principles and problems demanding attention of sandy soil embankment technique are proposed.

  15. Bituminous sands : tax issues

    Energy Technology Data Exchange (ETDEWEB)

    Patel, B. [PricewaterhouseCoopers LLP, Calgary, AB (Canada)

    2004-07-01

    This paper examined some of the tax issues associated with the production of bitumen or synthetic crude oil from oil sands. The oil sands deposits in Alberta are gaining more attention as the supplies of conventional oil in Canada decline. The oil sands reserves located in the Athabasca, Cold Lake and Peace River areas contain about 2.5 trillion barrels of highly viscous hydrocarbons called bitumen, of which nearly 315 billion barrels are recoverable with current technology. The extraction method varies for each geographic area, and even within zones and reservoirs. The two most common extraction methods are surface mining and in-situ extraction such as cyclic steam stimulation (CSS); low pressure steam flood; pressure cycle steam drive; steam assisted gravity drainage (SAGD); hot water flooding; and, fire flood. This paper also discussed the following general tax issues: bituminous sands definition; bituminous sands leases and Canadian development expense versus Canadian oil and gas property expense (COGPE); Canadian exploration expense (CEE) for surface mining versus in-situ methods; additional capital cost allowance; and, scientific research and experimental development (SR and ED). 15 refs.

  16. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...... test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. The Danish Triaxial Cell prescribes smooth pressure heads and specimens with equal height and diameter....... Four series with Id equal to 0.92, 0.87 0.76 and 0.55 have been performed....

  17. UK Frac Sand Resources

    OpenAIRE

    Mitchell, C J

    2015-01-01

    Although still just a glimmer in the gas man’s eye, the prospect of shale hydrocarbon (oil and gas) development in the UK has many companies thinking about the industrial minerals it will require. Chief amongst these is silica sand which is used as a ‘proppant’ in the hydraulic fracturing, or ‘fracking’, of shales to help release the gas. The UK has large resources of sand and sandstone, of which only a small proportion have the necessary technical properties that classify them as ‘silica san...

  18. New uses of gas in Canada : oil sands gas demand

    Energy Technology Data Exchange (ETDEWEB)

    Camarta, N. [Shell Canada Ltd., Calgary, AB (Canada)

    2003-07-01

    The relationship between the price of natural gas and the development of oil sands in northern Alberta was discussed with reference to Shell Canada's Athabasca Oil Sands Project (AOSP), its resource base and plans for future expansion. Several graphs were presented, depicting world scale resources, Canadian oil production, and the North American oil market. Graphs depicting future projections for oil sands natural gas demand and cogeneration capacity showed that the trend for both demand and capacity is steadily increasing. The AOSP is a large high quality reserve with low overburden. The project utilizes advanced bitumen clean-up technology and the site is equipped with a highly integrated refinery that exploits infrastructure synergies. Some of the risk factors associated with oil sand development were described as being capital costs, operating costs, commodity prices, labour supply, and the Kyoto Protocol. 24 figs.

  19. Development of a pneumatically driven active cover lid for multi-well microplates for use in perfusion three-dimensional cell culture

    OpenAIRE

    Song-Bin Huang; Dean Chou; Yu-Han Chang; Ke-Cing Li; Tzu-Keng Chiu; Yiannis Ventikos; Min-Hsien Wu

    2015-01-01

    Before microfluidic-based cell culture models can be practically utilized for bioassays, there is a need for a transitional cell culture technique that can improve conventional cell culture models. To address this, a hybrid cell culture system integrating an active cover lid and a multi-well microplate was proposed to achieve perfusion 3-D cell culture. In this system, a microfluidic-based pneumatically-driven liquid transport mechanism was integrated into the active cover lid to realize 6-un...

  20. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  1. Faraday, Jets, and Sand

    NARCIS (Netherlands)

    Sandtke, M.; van der Meer, Roger M.; Versluis, Andreas Michel; Lohse, Detlef

    2003-01-01

    When a 6-mm layer of fine sand with an average grain size of 40 µm is poured into a cylindrical container and shaken vertically, thin jets are seen to emerge from an airy cloud of grains, almost like protuberances from the corona of the sun. A quasi two-dimensional setup reveals the jet-formation

  2. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  3. Speleothems and Sand Castles

    Science.gov (United States)

    Hance, Trevor; Befus, Kevin

    2015-01-01

    The idea of building sand castles evokes images of lazy summer days at the beach, listening to waves crash, enjoying salty breezes, and just unplugging for a while to let our inner child explore the wonderful natural toys beneath our feet. The idea of exploring caves might evoke feelings and images of claustrophobia or pioneers and Native…

  4. Virksomhedens sande ansigt

    DEFF Research Database (Denmark)

    Lundholt, Marianne Wolff

    2017-01-01

    Er modhistorier en byrde eller en styrke i forandringsprocesser? Hvad stiller vi op, når adgangen til organisationens sande identitet går gennem medarbejdernes modhistorier? Når vi sammenholder denne erkendelse med vores viden om, at medarbejdere helt naturligt afholder sig fra at videregive disse...

  5. Sand (CSW4)

    CSIR Research Space (South Africa)

    Estuarine and Coastal Research Unit

    1982-12-01

    Full Text Available This report is one of a series on Cape Estuaries being published under the general title "The Estuaries of the Cape, Part 2". The report provides information on sand estuary: historical background, abiotic and biotic characteristics. It is pointed...

  6. Sand supply to beaches

    Science.gov (United States)

    Aagaard, Troels

    2017-04-01

    In most cases, beaches and dunes are built by sand that has been transported onshore from the shoreface. While this has been known for a long time, we are still not able to quantitatively predict onshore sediment transport and sand supply to beaches. Sediment transport processes operating during brief, high-energy stormy conditions - when beaches erode and sand moves offshore - are fairly well known and they can be modelled with a reasonable degree of confidence. However, the slower onshore sand transport leading to beach recovery under low-to-moderate energy conditions - and the reason why beaches and dunes exist in the first place - is not yet well understood. This severely limits our capability to understand and predict coastal behaviour on long time scales, for example in response to changing sea level or wave conditions. This paper will discuss issues and recent developments in sediment transport measurement and prediction on the lower and upper shoreface and into the swash zone. The focus will be on the integration and upscaling of small-scale deterministic process measurements into parametric models that may increase modelling capabilities of coastal behaviour on larger temporal and spatial scales.

  7. Erosion phenomena in sand moulds

    Directory of Open Access Journals (Sweden)

    A. Chojecki

    2008-03-01

    Full Text Available Authors studicd the erosion phcnorncna in sand moulds pured with cast iron. Thc study comprises an evaluation of erosionresistance of thc three sands: grccn sand. sand bondcd with inorganic or organic bindcr. It was concluded that thc most resistant is [heclassic green sand with thc addition of 5 B coal dust. Resistance of the sand with organic binder is generally weak and dcvnds onkind of used raisin. Spccinl nztcntion was paid to the sands with no organic bindcr watcr glass and phospha~c. It was Sound that thcirrcsistance depends on dehydratation conditions. When the mould is stored in law humidity of atmosphcrc the very strong crosion canbe expected. It rcsul ts hrn thc micro fractures in the bridges of binders, joining the grains of the sable. This phcnomcna facilitates thetearing away of fragments of sand [tom the surface

  8. Traceability of optical length measurements on sand surfaces

    DEFF Research Database (Denmark)

    Mohaghegh, Kamran; Yazdanbakhsh, Seyed Alireza; Tiedje, Niels Skat

    2016-01-01

    This work concerns traceable measurements on moulds used in automatic casting lines made of green sand, which has a very low strength against the force of a contact probe. A metrological set-up was made based on the use of calibrated workpieces following ISO 15530-3 to determine the uncertainty...... of optical measurements on a sand surface. A new customised sand sample was developed using a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to that of green sand. The length of the sample was calibrated using a dial gauge set-up. An optical 3D...... scanner with fringe pattern projection was used to measure the length of a green sand sample (soft sample) with traceability transfer through the hard sample. Results confirm that the uncertainty of the optical scanner on the substituted hard sample is similar to that of the soft sample, so the hard...

  9. On Pluvial Compaction of Sand

    DEFF Research Database (Denmark)

    Jacobsen, Moust

    At the Institute of Civil Engineering in Aalborg model tests on dry sand specimens have been carried out during the last five years. To reduce deviations in test results, the sand laying technique has been carefully studied, and the sand mass spreader constructed. Preliminary results have been...

  10. Study on Key Technology of Using Shell Sand as Backfill for Sea Reclamation

    Institute of Scientific and Technical Information of China (English)

    LI Neng-hui; QU Yi-rong; HE Wen-qin; CHEN Hui

    2005-01-01

    The results of a study on the key technology of using shell sand, a kind of sea sand, as backfill for sea reclamation are described briefly. Laboratory tests show that the physical and mechanical properties of shell sand are as good as normal quartz sand. Based on the chemical test and durability test of shell sand it could be concluded that the influence of corrosion of shell sand by acid rain and sea water might be ignored in the evaluation of the safety and durability of the engineering project. The results of field improvement tests show that the bearing capacity of shell sand backfill foundation is more than 200 kPa after vibroflotation improvement or dynamic compaction improvement. The shell sand is a good backfill material for sea reclamation.

  11. Sand hazards on tourist beaches.

    Science.gov (United States)

    Heggie, Travis W

    2013-01-01

    Visiting the beach is a popular tourist activity worldwide. Unfortunately, the beach environment is abundant with hazards and potential danger to the unsuspecting tourist. While the traditional focus of beach safety has been water safety oriented, there is growing concern about the risks posed by the sand environment on beaches. This study reports on the death and near death experience of eight tourists in the collapse of sand holes, sand dunes, and sand tunnels. Each incident occurred suddenly and the complete burial in sand directly contributed to the victims injury or death in each case report.

  12. Fresh groundwater resources in a large sand replenishment

    Science.gov (United States)

    Huizer, Sebastian; Oude Essink, Gualbert H. P.; Bierkens, Marc F. P.

    2016-08-01

    The anticipation of sea-level rise and increases in extreme weather conditions has led to the initiation of an innovative coastal management project called the Sand Engine. In this pilot project a large volume of sand (21.5 million m3) - also called sand replenishment or nourishment - was placed on the Dutch coast. The intention is that the sand is redistributed by wind, current, and tide, reinforcing local coastal defence structures and leading to a unique, dynamic environment. In this study we investigated the potential effect of the long-term morphological evolution of the large sand replenishment and climate change on fresh groundwater resources. The potential effects on the local groundwater system were quantified with a calibrated three-dimensional (3-D) groundwater model, in which both variable-density groundwater flow and salt transport were simulated. Model simulations showed that the long-term morphological evolution of the Sand Engine results in a substantial growth of fresh groundwater resources, in all adopted climate change scenarios. Thus, the application of a local sand replenishment could provide coastal areas the opportunity to combine coastal protection with an increase of the local fresh groundwater availability.

  13. PROCESSING OF MONAZITE SAND

    Science.gov (United States)

    Calkins, G.D.; Bohlmann, E.G.

    1957-12-01

    A process for the recovery of thorium, uranium, and rare earths from monazite sands is presented. The sands are first digested and dissolved in concentrated NaOH, and the solution is then diluted causing precipitation of uranium, thorium and rare earth hydroxides. The precipitate is collected and dissolved in HCl, and the pH of this solution is adjusted to about 6, precipitating the hydroxides of thorium and uranium but leaving the rare earths in solution. The rare earths are then separated from the solution by precipitation at a still higher pH. The thorium and uranium containing precipitate is redissolved in HNO/sub 3/ and the two elements are separated by extraction into tributyl phosphate and back extraction with a weakly acidic solution to remove the thorium.

  14. Moving sand dunes

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    In several desert areas, the slow motion of sand dunes can be a challenge for modern human activities and a threat for the survival of ancient places or archaeological sites. However, several methods exist for surveying the dune fields and estimate their migration rate. Among these methods, the use of satellite images, in particular of those freely available on the World Wide Web, is a convenient resource for the planning of future human settlements and activities.

  15. Booming Sand Dunes

    Science.gov (United States)

    Vriend, Nathalie

    "Booming" sand dunes are able to produce low-frequency sound that resembles a pure note from a music instrument. The sound has a dominant audible frequency (70-105 Hz) and several higher harmonics and may be heard from far distances away. A natural or induced avalanche from a slip face of the booming dune triggers the emission that may last for several minutes. There are various references in travel literature to the phenomenon, but to date no scientific explanation covered all field observations. This thesis introduces a new physical model that describes the phenomenon of booming dunes. The waveguide model explains the selection of the booming frequency and the amplification of the sound in terms of constructive interference in a confined geometry. The frequency of the booming is a direct function of the dimensions and velocities in the waveguide. The higher harmonics are related to the higher modes of propagation in the waveguide. The experimental validation includes quantitative field research at the booming dunes of the Mojave Desert and Death Valley National Park. Microphone and geophone recordings of the acoustic and seismic emission show a variation of booming frequency in space and time. The analysis of the sensor data quantifies wave propagation characteristics such as speed, dispersion, and nonlinear effects and allows the distinction between the source mechanism of the booming and the booming itself. The migration of sand dunes results from a complicated interplay between dune building, wind regime, and precipitation. The morphological and morphodynamical characteristics of two field locations are analyzed with various geophysical techniques. Ground-penetrating radar images the subsurface structure of the dunes and reveal a natural, internal layering that is directly related to the history of dune migration. The seismic velocity increases abruptly with depth and gradually increases with downhill position due to compaction. Sand sampling shows local

  16. Sediment mathematical model for sand ridges and sand waves

    Institute of Scientific and Technical Information of China (English)

    LI Daming; WANG Xiao; WANG Xin; LI Yangyang

    2016-01-01

    A new theoretical model is formulated to describe internal movement mechanisms of the sand ridges and sand waves based on the momentum equation of a solid-liquid two-phase flow under a shear flow. Coupling this equation with two-dimensional shallow water equations and wave reflection-diffraction equation of mild slope, a two-dimensional coupling model is established and a validation is carried out by observed hydrogeology, tides, waves and sediment. The numerical results are compared with available observations. Satisfactory agreements are achieved. This coupling model is then applied to the Dongfang 1-1 Gas Field area to quantitatively predict the movement and evolution of submarine sand ridges and sand waves. As a result, it is found that the sand ridges and sand waves movement distance increases year by year, but the development trend is stable.

  17. 77 FR 24980 - Record of Decision for Authorizing the Use of Outer Continental Shelf (OCS) Sand Resources in the...

    Science.gov (United States)

    2012-04-26

    ... (OCS) Sand Resources in the Martin County, Florida Hurricane Storm Damage Reduction Project AGENCY... Decision. SUMMARY: BOEM has issued a Record of Decision (ROD) to authorize the use of OCS sand resources by... agreement for the purpose of making sand available from a shoal on the OCS for placement on the beach...

  18. Development of a pneumatically driven active cover lid for multi-well microplates for use in perfusion three-dimensional cell culture

    Science.gov (United States)

    Huang, Song-Bin; Chou, Dean; Chang, Yu-Han; Li, Ke-Cing; Chiu, Tzu-Keng; Ventikos, Yiannis; Wu, Min-Hsien

    2015-12-01

    Before microfluidic-based cell culture models can be practically utilized for bioassays, there is a need for a transitional cell culture technique that can improve conventional cell culture models. To address this, a hybrid cell culture system integrating an active cover lid and a multi-well microplate was proposed to achieve perfusion 3-D cell culture. In this system, a microfluidic-based pneumatically-driven liquid transport mechanism was integrated into the active cover lid to realize 6-unit culture medium perfusion. Experimental results revealed that the flow of culture medium could be pneumatically driven in a flow-rate uniform manner. We used the system to successfully perform a perfusion 3-D cell culture of mesenchymal stem cells (MSCs) for up to 16 days. Moreover, we investigated the effects of various cell culture models on the physiology of MSCs. The physiological nature of MSCs can vary with respect to the cell culture model used. Using the perfusion 3-D cell culture format might affect the proliferation and osteogenic differentiation of MSCs. Overall, we have developed a cell culture system that can achieve multi-well microplate-based perfusion 3-D cell culture in an efficient, cost-effective, and user-friendly manner. These features could facilitate the widespread application of perfusion cell culture models for cell-based assays.

  19. Compressive behavior of fine sand.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Bradley E. (Air Force Research Laboratory, Eglin, FL); Kabir, Md. E. (Purdue University, West Lafayette, IN); Song, Bo; Chen, Wayne (Purdue University, West Lafayette, IN)

    2010-04-01

    The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trends were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.

  20. Sand dollar sites orogenesis

    Science.gov (United States)

    Amos, Dee

    2013-04-01

    The determinology of the humble sand dollars habitat changing from inception to the drastic evolution of the zone to that of present day. Into the cauldron along the southern Californian 'ring of fire' lithosphere are evidence of geosynclinals areas, metasedimentary rock formations and hydrothermal activity. The explanation begins with 'Theia' and the Moon's formation, battles with cometary impacts, glacial ages, epochs with evolutionary bottlenecks and plate tectonics. Fully illustrated the lecture includes localised diagrams and figures with actual subject photographic examples of plutonic, granitic, jade and peridodite. Finally, the origins of the materials used in the lecture are revealed for prosecution by future students and the enjoyment of interested parties in general.

  1. Sand Storms Trigger Alarm

    Institute of Scientific and Technical Information of China (English)

    LI LI

    2010-01-01

    @@ After an unusually humid winter with at least 10 snowfalls in Beijing, a severe andstorm blown by strong winds bringing with it thousands of tons of desert sand took many residents of the city by surprise.On the morning of March 20, Beijingers woke up to see clouds of yellow dust in the air and a sky that was an ominous orange in color.The loose soil and dust that had traveled htmdreds of miles from deserts in Mongolia and China's northwest blanketed Beijing's streets, covering parked vehicles, bikes, roofs and even plant life,as well as making its way into people's homes.

  2. Fortune Cookie Sand Dunes

    Science.gov (United States)

    2003-01-01

    MGS MOC Release No. MOC2-432, 25 July 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a field of small barchan sand dunes in the north polar region near 71.7oN, 51.3oW. Some of them are shaped like fortune cookies. The message these dunes provide: winds blow through this region from the lower right toward the upper left. The steep slip face slopes of these dunes, which point toward the upper left, indicate the wind direction. The scene is illuminated by sunlight from the upper right. The image is 3 km (1.9 mi) wide.

  3. A family of sand automata

    CERN Document Server

    Faulkner, Nicholas

    2012-01-01

    We study some dynamical properties of a family of two-dimensional cellular automata: those that arise from an underlying one dimensional sand automaton whose local rule is obtained using a latin square. We identify a simple sand automaton G whose local rule is algebraic, and classify this automaton as having equicontinuity points, but not being equicontinuous. We also show it is not surjective. We generalise some of these results to a wider class of sand automata.

  4. Dilatometric Characterization of Foundry Sands

    Directory of Open Access Journals (Sweden)

    M. Břuska

    2012-04-01

    Full Text Available The goal of this contribution is summary of physical – chemistry properties of usually used foundry silica and no – silica sands in Czech foundries. With the help of dilatometry analysis theoretical assumptions of influence of grain shape and size on dilatation value of sands were confirmed. Determined was the possibility of dilatometry analysis employment for preparing special (hybrid sands with lower and/or more linear character of dilatation.

  5. Casting Ductile Iron in Layer Moulds Made from Ecological Sands

    Directory of Open Access Journals (Sweden)

    M. Rączka

    2012-09-01

    Full Text Available The article contains the results of tests performed under the target project in Hardtop Foundry Charsznica.The objective of the tests and studies was to develop a technology of making high-quality ductile iron castings, combined witheffective means of environmental protection. The studies presented in this article related to castings weighing from 1 to 300 kg made from ductile iron of grades 400-15 and 500-7, using two-layer moulds, where the facing and core sand was the sand with an alkaline organic binder, while backing sand was the sand with an inorganic geopolymer binder.A simplified method of sand reclamation was applied with possible reuse of the reclaim as an addition to the backing sand. The castiron spheroidising treatment and inoculation were selected taking into account the specific conditions of Hardtop Foundry. A pilot batch of castings was made, testing the gating and feeding systems and using exothermic sleeves on risers. The study confirmed the validity of the adopted concept of making ductile iron castings in layer moulds, while maintaining the content of sand with an organic binder at a level of maximum 15%.

  6. Layers, Landslides, and Sand Dunes

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] Released 27 October 2003This image shows the northern rim of one of the Valles Marineris canyons. Careful inspection shows many interesting features here. Note that the spurs and gullies in the canyon wall disappear some distance below the top of the canyon wall, indicating the presence of some smooth material here that weathers differently from the underlying rocks. On the floor of the canyon, there are remains from a landslide that came hurtling down the canyon wall between two spurs. Riding over the topography of the canyon floor are many large sand dunes, migrating generally from the lower right to upper left.Image information: VIS instrument. Latitude -14.1, Longitude 306.7 East (53.3 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  7. Triaxial tests in Fontainebleau sand

    DEFF Research Database (Denmark)

    Latini, Chiara; Zania, Varvara

    2016-01-01

    The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note that the tes......The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note...... that the testing procedure and the data processing were carried out according to the specifications of ETCS-F1.97....

  8. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  9. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  10. A sand wave simulation model

    NARCIS (Netherlands)

    Nemeth, A.A.; Hulscher, S.J.M.H.; Damme, van R.M.J.

    2003-01-01

    Sand waves form a prominent regular pattern in the offshore seabeds of sandy shallow seas. A two dimensional vertical (2DV) flow and morphological numerical model describing the behaviour of these sand waves has been developed. The model contains the 2DV shallow water equations, with a free water su

  11. Regeneration of dredged sand waves

    NARCIS (Netherlands)

    Hulscher, Suzanne J.M.H.; Knaapen, Michiel; Scholl, Olaf; Scholl, O.; Trenteseaux., A.; Garlan, T.

    2000-01-01

    Sand waves form a wavy pattern in the offshore sandy seabed. Since their crests reduce the navigability, it is important to know their evolution. A simple model is presented to estimate the recovery of sand wave amplitudes. This model is partially based on the similarity with sea ripples and

  12. The extraction of bitumen from western oil sands: Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1997-11-26

    The program is composed of 20 projects, of which 17 are laboratory bench or laboratory pilot scale processes or computer process simulations that are performed in existing facilities on the University of Utah campus in north-east Salt Lake City. These tasks are: (1) coupled fluidized-bed bitumen recovery and coked sand combustion; (2) water-based recovery of bitumen; (3) oil sand pyrolysis in a continuous rotary kiln reactor; (4) oil sand pyrolysis in a large diameter fluidized bed reactor; (5) oil sand pyrolysis in a small diameter fluidized bed reactor; (6) combustion of spent sand in a transport reactor; (7) recovery and upgrading of oil sand bitumen using solvent extraction methods; (8) fixed-bed hydrotreating of Uinta Basin bitumens and bitumen-derived hydrocarbon liquids; (9) ebullieted bed hydrotreating of bitumen and bitumen derived liquids; (10) bitumen upgrading by hydropyrolysis; (11) evaluation of Utah`s major oil sand deposits for the production of asphalt, high-energy jet fuels and other specialty products; (12) characterization of the bitumens and reservoir rocks from the Uinta Basin oil sand deposits; (13) bitumen upgrading pilot plant recommendations; (14) liquid-solid separation and fine tailings thickening; (15) in-situ production of heavy oil from Uinta Basin oil sand deposits; (16) oil sand research and development group analytical facility; and (17) process economics. This volume contains an executive summary and reports for five of these projects. 137 figs., 49 tabs.

  13. The extraction of bitumen from western oil sands: Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1997-11-26

    The program is composed of 20 projects, of which 17 are laboratory bench or laboratory pilot scale processes or computer process simulations that are performed in existing facilities on the University of Utah campus in north-east Salt Lake City. These tasks are: (1) coupled fluidized-bed bitumen recovery and coked sand combustion; (2) water-based recovery of bitumen; (3) oil sand pyrolysis in a continuous rotary kiln reactor; (4) oil sand pyrolysis in a large diameter fluidized bed reactor; (5) oil sand pyrolysis in a small diameter fluidized bed reactor; (6) combustion of spent sand in a transport reactor; (7) recovery and upgrading of oil sand bitumen using solvent extraction methods; (8) fixed-bed hydrotreating of Uinta Basin bitumens and bitumen-derived hydrocarbon liquids; (9) ebullieted bed hydrotreating of bitumen and bitumen derived liquids; (10) bitumen upgrading by hydropyrolysis; (11) evaluation of Utah`s major oil sand deposits for the production of asphalt, high-energy jet fuels and other specialty products; (12) characterization of the bitumens and reservoir rocks from the Uinta Basin oil sand deposits; (13) bitumen upgrading pilot plant recommendations; (14) liquid-solid separation and fine tailings thickening; (15) in-situ production of heavy oil from Uinta Basin oil sand deposits; (16) oil sand research and development group analytical facility; and (17) process economics. This volume contains reports on nine of these projects, references, and a bibliography. 351 refs., 192 figs., 65 tabs.

  14. Sand swimming lizard: sandfish

    CERN Document Server

    Maladen, Ryan D; Kamor, Adam; Goldman, Daniel I

    2009-01-01

    We use high-speed x-ray imaging to reveal how a small (~10cm) desert dwelling lizard, the sandfish (Scincus scincus), swims within a granular medium [1]. On the surface, the lizard uses a standard diagonal gait, but once below the surface, the organism no longer uses limbs for propulsion. Instead it propagates a large amplitude single period sinusoidal traveling wave down its body and tail to propel itself at speeds up to ~1.5 body-length/sec. Motivated by these experiments we study a numerical model of the sandfish as it swims within a validated soft sphere Molecular Dynamics granular media simulation. We use this model as a tool to understand dynamics like flow fields and forces generated as the animal swims within the granular media. [1] Maladen, R.D. and Ding, Y. and Li, C. and Goldman, D.I., Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard, Science, 325, 314, 2009

  15. 2010 oil sands performance report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    With the depletion of traditional energy resources and the rising demand for energy, oil sands have become an important energy resource for meeting energy needs. Oil sands are a mixture of water, sand, clay and bitumen which is recovered either through open pit mining or in situ drilling techniques. The bitumen is then converted into syncrude or sold to refineries for the production of gasoline, diesel or other products. Shell has oil sands operations in Alberta and the aim of this report is to present its 2010 performance in terms of CO2, water, tailings, land, and reclamation and engagement. This document covers several of Shell's operations in the Muskeg River and Jackpine mines, Scotford upgrader, Peace River, Orion, Seal, Cliffdale and Chipmunk. It provides useful information on Shell's oil sands performance to governments, environmental groups, First Nations, local communities and the public.

  16. Sand harm in taklimakan Desert highway and sand control

    Institute of Scientific and Technical Information of China (English)

    HANZhiwen; WANGTao; SUNQingwei; DONGZhibao; WANGXunming

    2003-01-01

    Reputed as a wonderful achievement of the world’s highway construction history,the Taklimakan Desert highway is nor facing serious sand drift encroachment problems due to its 447-km-long passage of sand sea consisting of crescent dunes,barchan chains,compound transverse dune ridges and complex megadunes.To solve some technical problems in the protection of the highway from sang drift encroachment,desert experts have been conducting the theoretical and applied studies on sand movement laws;causes,severities and time-space differentiation of sand drift damages;and control ways including mechanical,chemical and biological measures.In this paper the authors give an overall summry on the research contents and recent progress in the control of sand drift damages in China and hold that the theoretical researc results and practices in the prevention of sand drift encroachment on the cross-desert highway represnt a breakthrough and has an cpoch-making significance.Since the construction of protective forest along the cross-desert highway requires large amount of ground water,what will be its environmental consequence and whether it can effectively halt sand drift encroachment on the highway forever are the questions to be studied urgently.

  17. Parcperdue geopressure-geothermal project. Study a geopressured reservoir by drilling and producing a well in a limited geopressured water sand. Final technical report, September 28, 1979-December 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, J.R.; Stanley, J.G. (eds.)

    1984-01-15

    The behavior of geopressured reservoirs was investigated by drilling and producing a well in small, well defined, geopressured reservoir; and performing detailed pressure transient analysis together with geological, geophysical, chemical, and physical studies. The Dow-DOE L. R. Sweezy No. 1 well was drilled to a depth of 13,600 feet in Parcperdue field, just south of Lafayette, Louisiana, and began production in April, 1982. The production zone was a poorly consolidated sandstone which constantly produced sand into the well stream, causing damage to equipment and causing other problems. The amount of sand production was kept manageable by limiting the flow rate to below 10,000 barrels per day. Reservoir properties of size, thickness, depth, temperature, pressure, salinity, porosity, and permeability were close to predicted values. The reservoir brine was undersaturated with respect to gas, containing approximately 20 standard cubic feet of gas per barrel of brine. Shale dewatering either did not occur or was insignificant as a drive mechanism. Production terminated when the gravel-pack completion failed and the production well totally sanded in, February, 1983. Total production up to the sanding incident was 1.94 million barrels brine and 31.5 million standard cubic feet gas.

  18. Athabasca oil sands development : lessening the footprint

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, R. [Alberta Environment, AB (Canada)

    2005-07-01

    This presentation provided an overview of the oil sands development footprint from the perspectives of industry, environmental associations and regulatory agencies. A map of regional oil sands developments was presented along with details of land disturbance to date. Industry strategies for lessening the impact of land disturbance include compact space-efficient mining operations; good planning; and effective, progressive reclamation. A closure and reclamation model was presented, along with key reclamation challenges such as overburden. Issues concerning tailings sands were examined. Details of Syncrude's closure vision were presented, including details of the Mildred Lake site. Details of the Fort McMurray Environmental Association were presented as well as various regional multi-stakeholder initiatives. A background of Syncrude and Suncor operations was presented as well as development projection forecasts. Impacts to the Boreal region were examined. Details of land reclamation by Syncrude were provided, as well as a chart of cumulative disturbances. It was noted that recent applications have indicated numerous reclamation uncertainties, including long-term performance of landforms and the feasibility of developing trafficable tailings landforms. It was suggested that the ecosystem dynamics of the Boreal are poorly understood. Exacerbating factors include the degraded state of soils; viability of end pit lakes; and climate change. It was suggested that operators are proposing to deal with landscape and technology uncertainty using adaptive management strategies. Government responses to the oil sand development footprint include the encouragement of more research into tailings technologies, end pit lake viability and reclamation; and the identification of regional landscape ecological thresholds by the Cumulative Environmental Management Association (CEMA). It was concluded that uncertainty needs to be addressed via a variety of policy and management options

  19. Effect of Different Forcing Processes on the Longshore Sediment Transport at the Sand Motor, The Netherlands

    NARCIS (Netherlands)

    Kaji, A.O.; Luijendijk, A.P.; van Thiel de Vries, J.S.M.; De Schipper, M.A.; Stive, M.J.F.

    2014-01-01

    The Sand Motor is a pilot project of a ‘mega-nourishment’ built in the Dutch coast in 2011. In order to understand which conditions reshape those mega-nourishments the influence of different types of forcing on the longshore sediment transport along the Sand Motor has been assessed in this paper usi

  20. Effect of Different Forcing Processes on the Longshore Sediment Transport at the Sand Motor, The Netherlands

    NARCIS (Netherlands)

    Kaji, A.O.; Luijendijk, A.P.; van Thiel de Vries, J.S.M.; De Schipper, M.A.; Stive, M.J.F.

    2014-01-01

    The Sand Motor is a pilot project of a ‘mega-nourishment’ built in the Dutch coast in 2011. In order to understand which conditions reshape those mega-nourishments the influence of different types of forcing on the longshore sediment transport along the Sand Motor has been assessed in this paper

  1. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  2. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  3. Multi-well pumping units system and its features analysis%多井抽油中心系统及其特性分析

    Institute of Scientific and Technical Information of China (English)

    韩修廷; 李晓东; 李举辉; 李俊亮; 范兆玮; 李娟; 徐金超

    2012-01-01

    In the light of the problems of multi-transmission segments, poor movement performance, reactive payload of sucker rod, large fluctuating range of payload, negative power and torque of beam pumping units, a method of fluctuating payload multi-phase homogeneous outputting was designed, and a multi-well integrated pumping units system was researched. The system kinematic analysis equations were founded, and the formulas about polished rod displacement, velocity, acceleration, reducer output torque and electrical power were derived and comparative analyzed with beam pumping units. The results show that, the power performance of multi-well pumping units is better than that of beam pumping units, the maximum torque decreases , and the fluctuating payload becomes homogeneous and completely positive. Installed power is decreased and working condition is improved. As working in even number wells, necessary drive decreases by self-balancing of payload. The pumping units need to add balance piece as working in odd number wells. The life of flexible power-transmission products should be considered in design process. The field tests have a good effect and it's a new method of saving energy by driving multi-well with single motor and positive torque.%针对现有单井抽油机传动环节多、运动性能差、存在抽油杆无效载荷、有效载荷交变幅度大、功率和扭矩存在负值等导致低效问题,提出交变载荷多相位均匀输出思路和原理,研发多井抽油中心系统.建立系统运动和动力分析方程,推导出抽油机悬点位移、速度、加速度、减速器扭矩及电机功率计算公式,并与游梁式抽油机工作性能进行对比分析.结果表明:多井抽油中心动力性能明显优于游梁式抽油机,最大扭矩减小,载荷交变均匀化,消除了负扭矩,改善了减速器的工作条件,降低了电动机的装机功率;抽油中心系统抽采偶数丛式井时,利用油井载荷自平衡,所

  4. Coastal Sand Deposits 2006

    Data.gov (United States)

    California Department of Resources — The supplemental information lists the geology data files, by county, and the name of the ESRI shapefile used in the creation of this dataset. All data was projected...

  5. Spectroscopic characterization of a Nigerian standard sand: Igbokoda sand

    CSIR Research Space (South Africa)

    Ojuri, OO

    2017-01-01

    Full Text Available the Middle Ordovician St. Peter Sandstone near Ottawa, Illinois, had been picked by the American Society for Testing and Materials (ASTM) as the reference sand to employ in testing cement and strength of concrete [9]. To the best of our knowledge... and magnetic resonance spectroscopic techniques due to its importance in cement, geotechnical/geo-environmental research in Nigeria. This should halt importation of standard silica sand for mortar and concrete testing...

  6. Saltation of Non-Spherical Sand Particles

    Science.gov (United States)

    Wang, Zhengshi; Ren, Shan; Huang, Ning

    2014-01-01

    Saltation is an important geological process and the primary source of atmospheric mineral dust aerosols. Unfortunately, no studies to date have been able to precisely reproduce the saltation process because of the simplified theoretical models used. For example, sand particles in most of the existing wind sand movement models are considered to be spherical, the effects of the sand shape on the structure of the wind sand flow are rarely studied, and the effect of mid-air collision is usually neglected. In fact, sand grains are rarely round in natural environments. In this paper, we first analyzed the drag coefficients, drag forces, and starting friction wind speeds of sand grains with different shapes in the saltation process, then established a sand saltation model that considers the coupling effect between wind and the sand grains, the effect of the mid-air collision of sand grains, and the effect of the sand grain shape. Based on this model, the saltation process and sand transport rate of non-spherical sand particles were simulated. The results show that the sand shape has a significant impact on the saltation process; for the same wind speed, the sand transport rates varied for different shapes of sand grains by as much as several-fold. Therefore, sand shape is one of the important factors affecting wind-sand movement. PMID:25170614

  7. Aeolian sediment flux derived from a natural sand trap

    NARCIS (Netherlands)

    Weerd, van der A.J.; Wijnberg, K.M.

    2016-01-01

    In 2011, a mega-nourishment (the ‘Sand Motor’) was constructed along the Dutch Coast. Since it is a pilot project, its evolution is closely monitored. This paper presents first results on the temporal variation in aeolian sediment transport across the nourishment, based on (a) the rate of infill ove

  8. Laboratory investigation of the loading rate effects in sand

    NARCIS (Netherlands)

    Huy, N.Q.; Van Tol, A.F.; Hölscher, P.

    2006-01-01

    In order to improve the interpretation of the quasi-static (e.g. Statnamic) pile load tests, a research project has been started to investigate effects of the loading rate on the bearing capacity of a pile in sand. A series of laboratory tests has been carried out. The testing program consists of a

  9. Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2011-04-01

    Full Text Available Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires theapplication of reclamation methods adequate to their properties as well as special devices realizing tasks. The spent sands circulationsystem containing the same kind of moulding and core sands is optimal from the point of view of the expected reclamation results.However, in the face of a significant variability of applied technologies and related to them various reclamation methods, the need - of theobtained reclamation products assessment on the grounds of systematic criteria and uniform bases – arises, with a tendency of indicatingwhich criteria are the most important for the given sand system. The reclaimability results of the mixture of the spent moulding sand withGeko S bentonite and the spent core sand with the Kaltharz 404U resin hardened by acidic hardener 100 T3, are presented in the paper.Investigations were performed with regard to the estimation of an influence of core sands additions (10 –25% on the reclaimed materialquality. Dusts and clay content in the reclaim, its chemical reaction (pH and ignition loss were estimated. The verification of the reclaiminstrumental assessment was performed on the basis of the technological properties estimation of moulding sand with bentonite, where the reclaimed material was used as a matrix.

  10. Evaluation of Reclamability of Molding Sands with New Inorganic Binders

    Directory of Open Access Journals (Sweden)

    I. Izdebska-Szanda

    2012-04-01

    Full Text Available One of the purposes of the application of chemically modified inorganic binders is to improve knocking out properties and the related reclamability with previously used in foundry inorganic binder (water glass, which allowing the use of ecological binders for casting non- ferrous metals. Good knocking out properties of the sands is directly related to the waste sands reclamability, which is a necessary condition of effective waste management. Reclamation of moulding and core sands is a fundamental and effective way to manage waste on site at the foundry, in accordance with the Environmental Guidelines. Therefore, studies of reclamation of waste moulding and core sands with new types of inorganic binders (developed within the framework of the project were carried out. These studies allowed to determine the degree of recovery of useful, material, what the reclaimed sand is, and the degree of its use in the production process. The article presents these results of investigation. They are a part of broader research programme executed under the project POIG.01.01.02-00- 015/09 "Advanced materials and technologies".

  11. Management recommendations: Sand Lake Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Sand Lake National Wildlife Refuge, by a land use specialist. Recommendations, time frame and...

  12. FLOW FIELD CHARACTERISTICS OF THE SAND FUNNEL AND ITS ME-CHANICS OF SEDIMENT TRANSPORT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The flow in funnel chamber is typical three-di-mensional flow. The experimental results of clear water flowfield and muddy water flow field show that the flow character-istics in the funnel chamber are favorable to the separation ofwater and sand. Tangential velocity sustains the vortexstrength of the funnel chamber, axial velocity is benefit to thesediment sinking, and radial velocity is benefit to sedimentmoving to desilting hole. So the sand funnel is successful insediment disposal. The sand funnel projection has also gooddesilting effectiveness in practice. Its average flushing dis-charge is 3% of inlet canal discharge, the sand disposal rate is100% for the sand with grain diameter of more than 0. 5mm,and is more than 90% for the sand with grain diameter of lessthan 0. 5mm.

  13. University of Utah Oil Sand Research and Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1993-12-31

    An overview of the Oil Sand Research and Development Program at the University of Utah will be presented. It will include resource characterization of the Uinta Basin oils and deposits and bitumens and bitumen-derived liquid recovery and upgrading technology and product utilization. The characterization studies will include the Whiterocks and Asphalt Ridge oil sands. The discussion of recovery and upgrading technologies will include aqueous separation, thermal recovery processes; solvent extraction, and thermal and catalytic upgrading of bitumen and bitumen-derived heavy oils. Product evaluation studies will include jet fuels, diesel fuel, asphalt and specialty chemicals. Plans for the future of the project will be discussed.

  14. An Investigation for Disposal of Drill Cuttings into Unconsolidated Sandstones and Clayey Sands

    Energy Technology Data Exchange (ETDEWEB)

    Mese, Ali; Dvorkin, Jack; Shillinglaw, John

    2000-09-11

    This project include experimental data and a set of models for relating elastic moduli/porosity/texture and static-to-dynamic moduli to strength and failure relationships for unconsolidated sands and clayey sands. The results of the project should provide the industry with a basis for wider use of oil base drilling fluids in water sensitive formations by implementing drill cutting injection into existing wells at abandoned formations and controlling fracture geometry to prevent ground water contamination.

  15. Multi-well fungal co-culture for de novo metabolite-induction in time-series studies based on untargeted metabolomics.

    Science.gov (United States)

    Bertrand, Samuel; Azzollini, Antonio; Schumpp, Olivier; Bohni, Nadine; Schrenzel, Jacques; Monod, Michel; Gindro, Katia; Wolfender, Jean-Luc

    2014-07-29

    The induction of fungal metabolites by fungal co-cultures grown on solid media was explored using multi-well co-cultures in 2 cm diameter Petri dishes. Fungi were grown in 12-well plates to easily and rapidly obtain the large number of replicates necessary for employing metabolomic approaches. Fungal culture using such a format accelerated the production of metabolites by several weeks compared with using the large-format 9 cm Petri dishes. This strategy was applied to a co-culture of a Fusarium and an Aspergillus strain. The metabolite composition of the cultures was assessed using ultra-high pressure liquid chromatography coupled to electrospray ionisation and time-of-flight mass spectrometry, followed by automated data mining. The de novo production of metabolites was dramatically increased by nutriment reduction. A time-series study of the induction of the fungal metabolites of interest over nine days revealed that they exhibited various induction patterns. The concentrations of most of the de novo induced metabolites increased over time. However, interesting patterns were observed, such as with the presence of some compounds only at certain time points. This result indicates the complexity and dynamic nature of fungal metabolism. The large-scale production of the compounds of interest was verified by co-culture in 15 cm Petri dishes; most of the induced metabolites of interest (16/18) were found to be produced as effectively as on a small scale, although not in the same time frames. Large-scale production is a practical solution for the future production, identification and biological evaluation of these metabolites.

  16. Effect of the coastal conservation due to beach nourishment of Totori sand dune coast

    OpenAIRE

    Y. Shibutani; Matsubara, Y.; Kuroiwa, M.

    2013-01-01

    Tottori Sand Dune Coast located at western part of Japan is a sandy beach with a length about 8km facing Sea of Japan. The coast has been eroded starting around 1940s and the beach nourishment project has been carried out to restore the shoreline since 2005 at Tottori Sand Dune Coast. In the project, the deposition sands at port and river mouth were transported to the erosional area and injected in the region of the offshore erosional area and the backshore area and the total volumes of the s...

  17. Disturbance of the inclined inserting-type sand fence to wind-sand flow fields and its sand control characteristics

    Science.gov (United States)

    Cheng, Jian-jun; Lei, Jia-qiang; Li, Sheng-yu; Wang, Hai-feng

    2016-06-01

    The inclined inserting-type sand fence is a novel sand retaining wall adopted along the Lanxin High-Speed Railway II in Xinjiang for controlling and blocking sand movement. To verify the effectiveness of the new fence structure for sand prevention, a wind tunnel test was used for flow field test simulation of the sand fence. The results indicate that the inclined inserting-type sand fence was able to deflect the flow of the sand and was able to easily form an upward slant acceleration zone on the leeward side of the sand fence. As shown by the percentage change in sand collection rates on the windward side and the leeward side of the sand fence, the sand flux per unit area at 4 m height in the slant upward direction increased on the leeward side of the inclined inserting-type sand fence. By comparing the flow fields, this site is an acceleration zone, which also reaffirms the correspondence of wind-sand flow fields with the spatial distribution characteristic of the wind-carried sand motion. The field sand collection data indicates that under the effects of the inclined inserting-type sand fence, the sandy air currents passing in front and behind the sand fence not only changed in quality, but the grain composition and particle size also significantly changed, suggesting that the inclined inserting-type sand fence has a sorting and filtering effect on the sandy air currents that passed through. The fence retained coarse particulates on the windward side and fine particulates within the shade of the wind on the leeward side.

  18. Experimental investigation on heat transport in gravel-sand materials

    DEFF Research Database (Denmark)

    Maureschat, Gerald; Heller, Alfred

    1997-01-01

    out in a small size experiment. The experiment consists of a highly insulated box filled with two kinds of sand material crossed by a plastic heat pipe. Heat transfer is measured under dry and water satured conditions in a cross-section.The conclusions are clear. To obtain necessary heat conduction......The project is a basic study on the expected thermal behaviour of gravel storage initiated as a part of a research and demonstration gravel storage for seasonal heat storage.The goal of the investigation is to determine the heat transfer between heat pipes and sand-gravel storage media by carrying...... media no convectional heat transport is found. It would be relevant to extend the investigation to media that enables convectional heat transport. A last conclusion is that such experiments, necessary for proper designing of sand-gravel storage types, are a very cheap form of collecting information...

  19. Optimal array of sand fences.

    Science.gov (United States)

    Lima, Izael A; Araújo, Ascânio D; Parteli, Eric J R; Andrade, José S; Herrmann, Hans J

    2017-03-24

    Sand fences are widely applied to prevent soil erosion by wind in areas affected by desertification. Sand fences also provide a way to reduce the emission rate of dust particles, which is triggered mainly by the impacts of wind-blown sand grains onto the soil and affects the Earth's climate. Many different types of fence have been designed and their effects on the sediment transport dynamics studied since many years. However, the search for the optimal array of fences has remained largely an empirical task. In order to achieve maximal soil protection using the minimal amount of fence material, a quantitative understanding of the flow profile over the relief encompassing the area to be protected including all employed fences is required. Here we use Computational Fluid Dynamics to calculate the average turbulent airflow through an array of fences as a function of the porosity, spacing and height of the fences. Specifically, we investigate the factors controlling the fraction of soil area over which the basal average wind shear velocity drops below the threshold for sand transport when the fences are applied. We introduce a cost function, given by the amount of material necessary to construct the fences. We find that, for typical sand-moving wind velocities, the optimal fence height (which minimizes this cost function) is around 50 cm, while using fences of height around 1.25 m leads to maximal cost.

  20. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  1. Contribution to improving of the sands-bitumen

    Science.gov (United States)

    Haddadi, S.; Saoula, S.; Muñoz, M. E.; Santamaría, A.

    2012-09-01

    Algeria is a country made up of about 75% desert. It is a country rich in sand dune. Roads made in these regions have had very significant damage. Their repairs are very expensive because there are generally isolated roads and supporting low traffic. Aggregates represent about 94% of the asphalt mixture. Aggregate quarries which have good characteristics for bituminous concrete are found in northern Algeria. The transport of these aggregates from north to south is extremely expensive. This makes the project to the south of Algeria very expensive. In order to overcome the lack of aggregates, the use of local materials becomes a necessity. In this study we were interested in the sand dunes in two regions of southern Algeria: El-Oued and Ouargla. The objective of this work is to find ways to improve the mechanical properties of these sands to increase the life of pavements with low traffic in these areas. We have associated with these sands: crushed sand of the north, cement, lime and sulfur. Hubbard Field test, Marshall test, and Duriez test were applied to the different bituminous mixtures. This study showed that some associations have given encouraging results.

  2. Physical Characterizations of Sands and Their Influence in Fall Velocity

    Directory of Open Access Journals (Sweden)

    R. M. Gabriel

    2008-01-01

    Full Text Available Cancun beach is one of the most important tourist resorts on the Mexican coast, and is of prime importance to the local and national economies. As a result of the intense use of the beach and the unavailability of sand reserves, the extreme weather events that occur in the region (hurricanes have permanently damaged the beach. Over the last two decades several strong hurricanes severely weakened the system, but hurricane Wilma, October 2005, caused devastating erosion to the beach. After Wilma, an emergency nourishment project was implemented pumping a volume of 2.7 million m3 of sand onto the beach. Clearly, the sand used for the nourishment has a different shape factor, diameter distribution and density property compared to the native sand. The main goal of this paper is to characterize and compare the fall velocities of sand samples taken in and around Cancun. The settling velocities obtained for several samples were compared with the empirical formulations proposed by various authors. The influence of several parameters measured in the laboratory is discussed and a new formulation is presented.

  3. [Research progress on plant diversity conservation in sand dune areas].

    Science.gov (United States)

    Liu, Zhi-min; Ma, Jun-ling

    2008-01-01

    The landscape in sand dune areas is characterized by the alternate distribution of sand dune and interdune lowland, and the unique floras in these areas are some endemic or rare plant species. In recent years, the decrease in plant species richness and the disappearance of some endemic or rare plant species in these areas have been received special attention, which were listed in the Program of International Biodiversity Conservation, and studied in many countries and districts. In this paper, the research progress in these fields was summarized from the aspects of significance of plant diversity conservation, formation mechanisms of plant diversity, ways of plant diversity conservation, roles of plant diversity research in the development of ecological theories, and important issues in operating plant diversity conservation project. To conserve plant diversity in sand dune areas, attentions should be paid to the differences in conservation goals (to maintain high species richness or to conserve endemic or rare species) among different regions, and the balances between the stabilization of active sand and the conservation of endemic or rare species, and the maintenance of high species richness and the conservation of endemic or rare species. It needed also to consider the sand dune and the interdune lowland as a unified landscape unit to explore the impacts of disturbances and habitat fragment on plant diversity.

  4. Sands at Gusev Crater, Mars

    Science.gov (United States)

    Cabrol, Nathalie A.; Herkenhoff, Kenneth E.; Knoll, Andrew H.; Farmer, Jack D.; Arvidson, Raymond E.; Grin, E.A.; Li, Ron; Fenton, Lori; Cohen, B.; Bell, J.F.; Yingst, R. Aileen

    2014-01-01

    Processes, environments, and the energy associated with the transport and deposition of sand at Gusev Crater are characterized at the microscopic scale through the comparison of statistical moments for particle size and shape distributions. Bivariate and factor analyses define distinct textural groups at 51 sites along the traverse completed by the Spirit rover as it crossed the plains and went into the Columbia Hills. Fine-to-medium sand is ubiquitous in ripples and wind drifts. Most distributions show excess fine material, consistent with a predominance of wind erosion over the last 3.8 billion years. Negative skewness at West Valley is explained by the removal of fine sand during active erosion, or alternatively, by excess accumulation of coarse sand from a local source. The coarse to very coarse sand particles of ripple armors in the basaltic plains have a unique combination of size and shape. Their distribution display significant changes in their statistical moments within the ~400 m that separate the Columbia Memorial Station from Bonneville Crater. Results are consistent with aeolian and/or impact deposition, while the elongated and rounded shape of the grains forming the ripples, as well as their direction of origin, could point to Ma'adim Vallis as a possible source. For smaller particles on the traverse, our findings confirm that aeolian processes have dominated over impact and other processes to produce sands with the observed size and shape patterns across a spectrum of geologic (e.g., ripples and plains soils) and aerographic settings (e.g., wind shadows).

  5. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper. The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples,which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters,the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed,the saltation of high-speed sand particles and the creep of low-speed sand particles,respectively. The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic,particle size segregation and stratigraphy,but also in formation stages. In addition,three important speeds can be obtained by this method,which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  6. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    ZHENG XiaoJing; BO TianLi; XIE Li

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper.The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples, which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters, the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed, the saltation of high-speed sand particles and the creep of low-speed sand particles, respectively.The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic, particle size segregation and stratigraphy, but also in formation stages.In addition, three important speeds can be obtained by this method, which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  7. Dry reusing and wet reclaiming of used sodium silicate sand

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on the characteristics of used sodium silicate sand and the different use requirements for recycled sand, "dry reusing and wet reclaiming of used sodium silicate sand" is considered as the most suitable technique for the used sand. When the recycled sand is used as support sand, the used sand is only reused by dry process including breaking, screening, dust-removal, etc., and it is not necessary that the used sand is reclaimed with strongly rubbing and scraping method, but when the recycled sand is used as facing sand (or single sand), the used sand must be reclaimed by wet method for higher removal rate of the residual binders. The characteristics and the properties of the dry reused sand are compared with the wet reclaimed sand after combining the different use requirements of support sand and facing sand (or single sand), and above the most adaptive scheme has also been validated.

  8. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  9. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  10. Impact on sand and water

    NARCIS (Netherlands)

    Bergmann, R.P.H.M.

    2007-01-01

    In this thesis we investigate the impact of a body on sand and water. When a body impacts a free surface in the inertial regime the series of events is the following: On impact material is blown away in all directions and an impact cavity forms. Due to the hydrostatic pressure from the sides the cav

  11. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...

  12. experimental studies of sand production from unconsolidated ...

    African Journals Online (AJOL)

    ES Obe

    Production of sand during oil and gas exploration causes severe operational prob- ... duction such as risk of well failure, erosion of pipelines and surface facilities, sand separa- tion and disposal ... ment, theoretical and numerical analysis have.

  13. Research and Application of the Support Project of the Foundation Bearing Sand in Deep water%高地下水位含流沙基础开挖支护方案的研究和应用

    Institute of Scientific and Technical Information of China (English)

    黄少鹏

    2014-01-01

    This paper described the comprehensive research on the various measures for excavation support of the foun- dation bearing sand in deep water of the foundation drainage trench excavation construction in the municipal engineering of Angola Republic SãoPedro. And the author hoped to provide a useful reference for engineering construction schemes in sim- ilar geological conditions.%文章简述了在安哥拉共和国市政工程SãoPedro排水渠沟槽基础开挖施工中,通过对高地下水位、含流砂基础开挖支护的各种方案措施的综合研究,希望对有类似地质情况工程施工方案的研究和选择提供有益参考。

  14. Effects of oil sands sediments on fish

    Energy Technology Data Exchange (ETDEWEB)

    Parrott, J.; Colavecchia, M.; Hewitt, L.; Sherry, J.; Headley, J. [Environment Canada, Ottawa, ON (Canada); Turcotte, D.; Liber, K. [Saskatchewan Univ., Regina, SK (Canada)

    2010-07-01

    This paper described a collaborative project organized by Natural Resources Canada (NRCan) Panel of Energy Research and Development (PERD) with researchers from Environment Canada and the University of Saskatchewan. The 4-year study was conducted to assess the toxicity of oil sands sediments and river waters, and reclamation ponds and sediments on laboratory-raised fish. Three sediments from rivers were evaluated for their potential to cause adverse impacts on fathead minnow eggs and larvae for a period of 18 days. The study monitored hatching, larval survival, development, and growth. Naphthenic acids (NA), polycyclic aromatic hydrocarbons (PAHs) and metals were measured in the sediments to determine if the compounds can be correlated with observed toxicity. The study will also assess walleye eggs exposed to sediments, and in situ fish exposures. Toxicity identification and evaluation (TIE) studies will be conducted to isolate the fractions that may affect fish development and growth.

  15. Water supply and residual debris treatment for natural sand gravel processing system of Zaoshi project%皂市工程天然砂石加工系统供水及废渣处理

    Institute of Scientific and Technical Information of China (English)

    陈雯

    2000-01-01

    皂市水利枢纽工程的天然砂石加工系统位于渫水河左岸的漫滩地上,枯水期河水走右河槽。为了取到河水冲洗骨料,应用渗渠原理,在河漫滩下预埋集水管至左岸泵站的集水间。设两座沉渣池处理废水废渣。每座沉渣池的工作周期为14 d,即进水7 d,压实、脱水3~4 d,挖砂、清洗4~3 d。从设计上较好地解决了废水废渣的处理。对供水工程和废渣处理工艺流程作了详细介绍。%Natural sand gravel aggregate processing system for Zaoshi hydroporject is located on the left bank floodland of Xieshui river which flows along the right channel in dry season. In order to take water from the river to clean aggregate, applying seepage trench method, water collecting pipes are preembedded under the floodland and connected with sump pool of the left bank pump station. 2 sediment pools are set up for the waste water and residual debris disposal. The working period of each sediment pool is 14 days, 7 days for water intaking, 3~4 days for compaction and dewatering, 4~3 days for sand excavation and cleaning. The problem of the waste water and residual debris disposal is well solved in the design.

  16. PRELIMINARY STUDY ON SAND-DUST STORM DISASTER AND COUNTERMEASURES IN CHINA

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    As a kind of natural disasters, sand-dust storms frequently occur in deserts and their surrounding areas.The occurrence of this disaster in China's northwest and north China has exerted an extremely adverse effect upon the environ-ment in China. The management of sand-dust storms is of a systematic project closely related with the environment suchas agriculture, ecosystem, forestry, water conservancy, meteorology and other aspects. Therefore, studies of the forma-tion, the basic features, causes, temporal-spatial distribution, developing-trend and related disasters of sand-dust stormsin China are conducted based on satellite data. The experience of sand-dust storms control and countermeasures in the Unit-ed States and some other countries are referred. Meanwhile, preliminary countermeasures relating to sand-dust storms inChina are proposed.

  17. UK silica sand resources for fracking

    OpenAIRE

    Mitchell, Clive

    2013-01-01

    UK silica sand resources for fracking Clive Mitchell, Industrial Minerals Specialist, British Geological Survey, Keyworth, Nottingham, NG12 5GG Email: Silica sand is high purity quartz sand that is mainly used for glass production, as foundry sand, in horticulture, leisure and other industrial uses. One specialist use is as a ‘proppant’ to enhance oil and gas recovery. This presentation will focus on this application, particularly for shale gas recovery where it is mo...

  18. Treating tar sands formations with karsted zones

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  19. Sand Waves. Report 1. Sand Wave Shoaling in Navigation Channels

    Science.gov (United States)

    1992-09-01

    heights range from 0.8 m in the Minas Basin, Bay of Fundy (Dalrymple 1984) to 6.0 m in the Bahia Blanca Estuary, Argentina (Aliotta and Perillo 1987...26 PART IV: SITE-SPECIFIC SAND WAVE SHOALING PROBLEMS .. ........ 30 Columbia River Navigation Channel ........ ............... .. 30 Panama ...problem location discussed in this report is at St. Andrew Bay near Panama City, Florida. A relatively short section of the jettied inlet channel requires

  20. Experimental research on the mixed sand ratio and initial dry density of weathered sand improved expansive soil free load swelling rate

    Institute of Scientific and Technical Information of China (English)

    Yang Jun; Yang Zhi; Zhang Guodong; Tang Yunwei; Chen Hongping

    2014-01-01

    In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that: Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.

  1. METHOD OF PROCESSING MONAZITE SAND

    Science.gov (United States)

    Welt, M.A.; Smutz, M.

    1958-08-26

    A process is described for recovering thorium, uranium, and rare earth values from monazite sand. The monazite sand is first digested with sulfuric acid and the resulting "monazite sulfate" solution is adjusted to a pH of between 0.4 and 3.0, and oxalate anions are added causing precipitation of the thorium and the rare earths as the oxalates. The oxalate precipitate is separated from the uranium containing supernatant solution, and is dried and calcined to the oxides. The thorium and rare earth oxides are then dissolved in nitric acid and the solution is contacted with tribntyl phosphate whereby an organic extract phase containing the cerium and thorium values is obtained, together with an aqueous raffinate containing the other rare earth values. The organic phase is then separated from the aqueous raffinate and the cerium and thorium are back extracted with an aqueous medium.

  2. Traceability of Height Measurements on Green Sand Molds using Optical 3D Scanning

    DEFF Research Database (Denmark)

    Mohaghegh, Kamran; Yazdanbakhsh, S.A.; Tiedje, N. S.

    2016-01-01

    (CMM) which is traceable to the meter unit. Optical scanners are increasingly used for dimensional metrology without the risk of damaging the surface, but lack of international standards makes it difficult to establish traceability of their measurements and compare them to tactile instruments....... This paper presents a metrological approach for height measurement on green sand molds using an optical 3D scanner with fringe projection. A new sand sample was developed with a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to green sand...

  3. Characterization of sand lenses embedded in tills

    DEFF Research Database (Denmark)

    Kessler, Timo Christian; Klint, K.E.S.; Nilsson, B.

    2012-01-01

    of the various types of sand lenses is discussed, primarily in relation to the depositional and glaciotectonic processes they underwent. Detailed characterization of sand lenses facilitates such interpretations. Finally, the observations are linked to a more general overview of the distribution of sand lenses......Tills dominate large parts of the superficial sediments on the Northern hemisphere. These glacial diamictons are extremely heterogeneous and riddled with fractures and lenses of sand or gravel. The frequency and geometry of sand lenses within tills are strongly linked to glaciodynamic processes...... occurring in various glacial environments. This study specifically focuses on the appearance and spatial distribution of sand lenses in tills. It introduces a methodology on how to measure and characterize sand lenses in the field with regard to size, shape and degree of deformation. A set of geometric...

  4. A compact topology for sand automata

    CERN Document Server

    Dennunzio, Alberto; Masson, Benoît

    2008-01-01

    In this paper, we exhibit a strong relation between the sand automata configuration space and the cellular automata configuration space. This relation induces a compact topology for sand automata, and a new context in which sand automata are homeomorphic to cellular automata acting on a specific subshift. We show that the existing topological results for sand automata, including the Hedlund-like representation theorem, still hold. In this context, we give a characterization of the cellular automata which are sand automata, and study some dynamical behaviors such as equicontinuity. Furthermore, we deal with the nilpotency. We show that the classical definition is not meaningful for sand automata. Then, we introduce a suitable new notion of nilpotency for sand automata. Finally, we prove that this simple dynamical behavior is undecidable.

  5. Rheological Characterization of Green Sand Flow

    DEFF Research Database (Denmark)

    Jabbaribehnam, Mirmasoud; Spangenberg, Jon; Hovad, Emil

    2016-01-01

    The main aim of this paper is to characterize experimentally the flow behaviour of the green sand that is used for casting of sand moulds. After the sand casting process is performed, the sand moulds are used for metal castings. The rheological properties of the green sand is important to quantify...... module for characterizing granular materials. The new module enables viscosity measurements of the green sand as function of the shear rate at different flow rates, i.e. 0, 2, 4, 6, 8, 10, 12 and 15 L/min. The results show generally that the viscosity decreases with both the shear- and flow rate....... In addition, the measurements show that the green sand flow follows a shear-thinning behaviour even after the full fluidization point....

  6. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...... as well as the flow pattern during discharge of the silo. During discharge a mixed flow pattern has been identified...

  7. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17.

  8. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17

  9. Thermal Properties of oil sand

    Science.gov (United States)

    LEE, Y.; Lee, H.; Kwon, Y.; Kim, J.

    2013-12-01

    Thermal recovery methods such as Cyclic Steam Injection or Steam Assisted Gravity Drainage (SAGD) are the effective methods for producing heavy oil or bitumen. In any thermal recovery methods, thermal properties (e.g., thermal conductivity, thermal diffusivity, and volumetric heat capacity) are closely related to the formation and expansion of steam chamber within a reservoir, which is key factors to control efficiency of thermal recovery. However, thermal properties of heavy oil or bitumen have not been well-studied despite their importance in thermal recovery methods. We measured thermal conductivity, thermal diffusivity, and volumetric heat capacity of 43 oil sand samples from Athabasca, Canada, using a transient thermal property measurement instrument. Thermal conductivity of 43 oil sand samples varies from 0.74 W/mK to 1.57 W/mK with the mean thermal conductivity of 1.09 W/mK. The mean thermal diffusivity is 5.7×10-7 m2/s with the minimum value of 4.2×10-7 m2/s and the maximum value of 8.0×10-7 m2/s. Volumetric heat capacity varies from 1.5×106 J/m3K to 2.11×106 J/m3K with the mean volumetric heat capacity of 1.91×106 J/m3K. In addition, physical and chemical properties (e.g., bitumen content, electric resistivity, porosity, gamma ray and so on) of oil sand samples have been measured by geophysical logging and in the laboratory. We are now proceeding to investigate the relationship between thermal properties and physical/chemical properties of oil sand.

  10. 挤密砂桩集成控制系统优化方案的关键技术%Key technology for improving project of sand pile integration control system

    Institute of Scientific and Technical Information of China (English)

    李靖; 马振江

    2014-01-01

    基于砂桩控制系统硬件和程序生成的数据格式,通过研究Access数据库、具有EIA RS-232接口的PLC控制系统、具有TXT数据文件格式的GPS系统和具有TCP/IP通信协议的集中管理系统之间的通信方式,解决不同控制系统之间的互通问题,满足高效开发稳定集成控制系统要求。%Based on the hardware of the sand pile integration control system and data format made by the control program, we successfully developed the pattern of data exchange in the Access Database , PLC control system with the EIA RS-232 protocol, GPS System with the TXT data format and the computer system with the TCP/IP protocol for solving data exchange in control systems with different communication protocols, which can contribute to developing efficiently the stable integration control system.

  11. A Canadian perspective on the supply costs, production and economic impacts from oil sands development

    Energy Technology Data Exchange (ETDEWEB)

    McColl, D.; Masri, M. [Canadian Energy Research Inst., Calgary, AB (Canada)

    2008-05-15

    This article provided a synopsis of oil sands research recently conducted at the Canadian Energy Research Institute (CERI). The production profiles and capital expenditures that CERI has projected for oil sands projects were explored along with the macroeconomic benefits associated with oil sands development. In addition to rising capital and operating costs, bitumen producers are challenged by labour shortages and environmental concerns. However, CERI warrants continued growth in production from the oil sands industry, given the current high price state of the global oil market and security of supply concerns from oil importing countries. This article also provided background information and analysis to assess the implications of future development. The projected growth in the oil sands industry creates demands for infrastructure, housing, health care, education, and business services. The economic impacts were measured at the local, provincial, national and global levels in terms of changes in gross domestic product; changes in employment; and, changes in government revenues. It was concluded that with continued investment and development, Alberta's oil sands resource is expected to continue to produce oil for decades, and would eventually achieve 6 MMbpd production. 8 refs., 3 tabs., 10 figs.

  12. Evaluation of Durability Parameters of Concrete with Manufacture Sand and River Sand

    Science.gov (United States)

    Sangoju, Bhaskar; Ramesh, G.; Bharatkumar, B. H.; Ramanjaneyulu, K.

    2017-06-01

    Most of the states in our country have banned sand quarrying from the river beds, causing a scarcity of natural river sand for the construction sector. Manufacture sand (M-sand) is one of the alternate solutions to replace the river sand (R-sand) in concrete. The main aim of the present study is to evaluate the durability parameters of concrete with M-sand when compared to that of concrete with R-sand. Corrosion of reinforcement is one of the main deteriorating mechanisms of reinforced concrete due to the ingress of chloride ions or carbon-di-oxide. For comparative evaluation of durability parameters, accelerated tests such as Rapid Chloride Permeability Test, Rapid Chloride Migration Test and accelerated carbonation test were carried out on specimens of R-sand and M-sand. All tests were carried out after 90 days of casting. Test results reveal that the durability parameters of the concrete with M-sand in chloride induced environment is relatively better than that of concrete with R-sand and hence is recommended to use M-sand as a replacement to R-sand.

  13. Sand deposit-detecting method and its application in model test of sand flow

    Institute of Scientific and Technical Information of China (English)

    黎伟; 房营光; 莫海鸿; 谷任国; 陈俊生

    2013-01-01

    Against the background of the sand-flow foundation treatment engineering of Guangzhou Zhoutouzui variable cross-section immersed tunnel, a kind of sand deposit-detecting method was devised on the basis of full-scale model test of sand-flow method. The real-time data of sand-deposit height and radius were obtained by the self-developed sand-deposit detectors. The test results show that the detecting method is simple and has high precision. In the use of sand-flow method, the sand-carrying capability of fluid is limited, and sand particles are all transported to the sand-deposit periphery through crater, gap and chutes after the sand deposit formed. The diffusion range of the particles outside the sand-deposit does not exceed 2.0 m. Severe sorting of sand particles is not observed because of the unique oblique-layered depositing process. The temporal and spatial distributions of gap and chutes directly affect the sand-deposit expansion, and the expansion trend of the average sand-deposit radius accords with quadratic time-history curve.

  14. SAND

    DEFF Research Database (Denmark)

    Thorsen, Grete

    Der er udført et konsolideringsforsøg med bakkesand fra Lunds grusgrav, Lund no. O. forsøget er udført i samme konsolideringsapparat, som er anvendt til måling af deformationsegenskaberne af mange forskellige danske jordarter. Forsøgsresultaterne er søgt tolket som ved forsøg med andre jordarter....

  15. Liquefaction of Sand under Low Confining Pressure

    Institute of Scientific and Technical Information of China (English)

    YANG Shaoli; Rolf Sandven; Lars Grande

    2003-01-01

    Undrained behaviour of sand under low cell pressure was studied in static and cyclic triaxial tests. It was found that very loose sand liquefies under static loading with the relative density being a key parameter for the undrained behaviour of sand. In cyclic triaxial tests, pore water pressures built up during the cyclic loading and exceeded the confining cell pressure. This process was accompanied by a large sudden increase in axial deformation. The necessary number of cycles to obtain liquefaction was related to the confining cell pressure, the amplitude of cyclic loading and the relative density of sand.In addition, the patterns of pore water pressure response are different from those of sand samples with different relative densities. The test results are very useful for expounding scour mechanism around coastal structures since they relate to the low stress behaviour of the sand.

  16. Creep Behavior of Frozen Sand.

    Science.gov (United States)

    1981-06-01

    temperature and stress range. There was a 2strong stress dependance to S (r =0.95) for saturated Manchester Fine Sand which does not agree with RPT. The...Curves at High Stress 161 Ratio D/Du = 0.505 for Frozen HF’S at w=10% IV-20 Minimum Strain Rate Dependance on Stress 162 Ratio for Frozen MFS IV-21 Minimum...Strain Rate Dependance on Relative 163 Density for Frozen MFS IV-22 Temperature Stage Test on Frozen Saturated 164 MFS under a Load of D=9.24MPa Fig

  17. Connecting Brabant's cover sand landscapes through landscape history

    Science.gov (United States)

    Heskes, Erik; van den Ancker, Hanneke; Jungerius, Pieter Dirk; Harthoorn, Jaap; Maes, Bert; Leenders, Karel; de Jongh, Piet; Kluiving, Sjoerd; van den Oetelaar, Ger

    2015-04-01

    Noord-Brabant has the largest variety of cover sand landscapes in The Netherlands, and probably in Western Europe. During the Last Ice Age the area was not covered by land ice and a polar desert developed in which sand dunes buried the existing river landscapes. Some of these polar dune landscapes experienced a geomorphological and soil development that remained virtually untouched up to the present day, such as the low parabolic dunes of the Strabrechtse Heide or the later and higher dunes of the Oisterwijkse Vennen. As Noord-Brabant lies on the fringe of a tectonic basin, the thickness of cover sand deposits in the Centrale Slenk, part of a rift through Europe, amounts up to 20 metres. Cover sand deposits along the fault lines cause the special phenomenon of 'wijst' to develop, in which the higher grounds are wetter than the boarding lower grounds. Since 4000 BC humans settled in these cover sand landscapes and made use of its small-scale variety. An example are the prehistoric finds on the flanks and the historic towns on top of the 'donken' in northwest Noord-Brabant, where the cover sand landscapes are buried by river and marine deposits and only the peaks of the dunes protrude as donken. Or the church of Handel that is built beside a 'wijst' source and a site of pilgrimage since living memory. Or the 'essen' and plaggen agriculture that developed along the stream valleys of Noord-Brabant from 1300 AD onwards, giving rise to geomorphological features as 'randwallen' and plaggen soils of more than a metre thickness. Each region of Brabant each has its own approach in attracting tourists and has not yet used this common landscape history to connect, manage and promote their territories. We propose a landscape-historical approach to develop a national or European Geopark Brabants' cover sand landscapes, in which each region focuses on a specific part of the landscape history of Brabant, that stretches from the Late Weichselian polar desert when the dune

  18. Oil sands water withdrawal challenges and the Athabasca River

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.; Baker, M. [Shell Canada Ltd., Calgary, AB (Canada). Calgary Research Centre

    2003-07-01

    Drought conditions in Alberta have raised concerns regarding water withdrawal from the Athabasca River for oil sands development projects in the Regional Municipality of Wood Buffalo in Northeastern Alberta. In particular, concerns have been raised about the potential increased rates of water withdrawal during seasonal low flow periods. A committee has been established under the Cumulative Environmental Management Association (CEMA) to develop a management system for the Athabasca River. The committee includes stakeholders from federal and provincial governments, First Nations, non-government groups and industry. This paper describes the challenges facing oil sands developers in the region with particular emphasis on the role that the newly developed management system called 'Instream Flow Needs', will have on the cumulative water withdrawal from the Athabasca River. tabs., figs.

  19. Recent advances in waterglass sand technologies

    Institute of Scientific and Technical Information of China (English)

    ZHU Chun-xi

    2007-01-01

    This paper reports some new understandings and advances in waterglass sand technologies. The multiple chemical modification process can increase the binding strength of the waterglass sand by up to 50%-70%.Therefore, the additions of the modified waterglass can be decreased to 3.0%-4.0% for CO2 process and to 2.0%-2.5% for organic ester hardening process, and greatly improve the collapsibility and reclaimability of the sand. Based on the new understandings and experimental results reported in this paper, several original ideas, such as nano modification, have been proposed to promote advances of waterglass sand technologies,

  20. PROSPECTS FIXATION DRIFT SANDS PHYSICOCHEMICAL METHOD

    Directory of Open Access Journals (Sweden)

    Maujuda MUZAFFAROVA

    2016-09-01

    Full Text Available This article is based on the theoretical foundations of secure mobile sand being considered for reducing the negative impact of one of the manifestations of exogenous plains on such an important natural-technical system as a railroad. It suggests practical measures to build a system of design protection against sand drifts. The article also suggests ways to conserve resources and rational use of machinery and performers as well as the consolidation of mobile sand wet with water soluble waste of local production of waste dextrin. Consolidation is exposed on dry and wet sand.

  1. Innovative developments in sand reclamation technologies

    Directory of Open Access Journals (Sweden)

    R. Dañko

    2011-04-01

    Full Text Available Proper sand management and efficient sand reclamation system are two main factors influencing economical and ecological side of modern foundry plant. It is well known fact that the production of 1 metric ton of casting from ferrous alloys generates circa 1 metric ton of waste [1], which due to containing certain amounts of harmful and dangerous compounds should undergo a reclamation – at least of the main component, which means a silica sand grains. The paper present problems of scientific and development research concerning the innovative reclamation technologies of used foundry sands such as: mechanical-cryogenic reclamation and innovative thermal reclamation.

  2. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    OpenAIRE

    Sunday Isehunwa,; Andrew Farotade

    2010-01-01

    Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field ...

  3. Sediment Analysis Network for Decision Support (SANDS)

    Science.gov (United States)

    Hardin, D. M.; Keiser, K.; Graves, S. J.; Conover, H.; Ebersole, S.

    2009-12-01

    Since the year 2000, Eastern Louisiana, coastal Mississippi, Alabama, and the western Florida panhandle have been affected by 28 tropical storms, seven of which were hurricanes. These tropical cyclones have significantly altered normal coastal processes and characteristics in the Gulf region through sediment disturbance. Although tides, seasonality, and agricultural development influence suspended sediment and sediment deposition over periods of time, tropical storm activity has the capability of moving the largest sediment loads in the shortest periods of time for coastal areas. The importance of sediments upon water quality, coastal erosion, habitats and nutrients has made their study and monitoring vital to decision makers in the region. Currently agencies such as United States Army Corps of Engineers (USACE), NASA, and Geological Survey of Alabama (GSA) are employing a variety of in-situ and airborne based measurements to assess and monitor sediment loading and deposition. These methods provide highly accurate information but are limited in geographic range, are not continuous over a region and, in the case of airborne LIDAR are expensive and do not recur on a regular basis. Multi-temporal and multi-spectral satellite imagery that shows tropical-storm-induced suspended sediment and storm-surge sediment deposits can provide decision makers with immediate and long-term information about the impacts of tropical storms and hurricanes. It can also be valuable for those conducting research and for projects related to coastal issues such as recovery, planning, management, and mitigation. The recently awarded Sediment Analysis Network for Decision Support will generate decision support products using NASA satellite observations from MODIS, Landsat and SeaWiFS instruments to support resource management, planning, and decision making activities in the Gulf of Mexico. Specifically, SANDS will generate decision support products that address the impacts of tropical storms

  4. Study of Black Sand Particles from Sand Dunes in Badr, Saudi Arabia Using Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Haider Abbas Khwaja

    2015-08-01

    Full Text Available Particulate air pollution is a health concern. This study determines the microscopic make-up of different varieties of sand particles collected at a sand dune site in Badr, Saudi Arabia in 2012. Three categories of sand were studied: black sand, white sand, and volcanic sand. The study used multiple high resolution electron microscopies to study the morphologies, emission source types, size, and elemental composition of the particles, and to evaluate the presence of surface “coatings or contaminants” deposited or transported by the black sand particles. White sand was comprised of natural coarse particles linked to wind-blown releases from crustal surfaces, weathering of igneous/metamorphic rock sources, and volcanic activities. Black sand particles exhibited different morphologies and microstructures (surface roughness compared with the white sand and volcanic sand. Morphological Scanning Electron Microscopy (SEM and Laser Scanning Microscopy (LSM analyses revealed that the black sand contained fine and ultrafine particles (50 to 500 nm ranges and was strongly magnetic, indicating the mineral magnetite or elemental iron. Aqueous extracts of black sands were acidic (pH = 5.0. Fe, C, O, Ti, Si, V, and S dominated the composition of black sand. Results suggest that carbon and other contaminant fine particles were produced by fossil-fuel combustion and industrial emissions in heavily industrialized areas of Haifa and Yanbu, and transported as cloud condensation nuclei to Douf Mountain. The suite of techniques used in this study has yielded an in-depth characterization of sand particles. Such information will be needed in future environmental, toxicological, epidemiological, and source apportionment studies.

  5. Pattern formation - Instabilities in sand ripples

    DEFF Research Database (Denmark)

    Hansen, J. L.; v. Hecke, M.; Haaning, A.

    2001-01-01

    Sand ripples are seen below shallow wavy water and are formed whenever water oscillates over a bed of sand. Here we analyse the instabilities that can upset this perfect patterning when the ripples are subjected to large changes in driving amplitude or frequency, causing them to deform both...

  6. Silica sand resources in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Westerhoff, W.E.; Menkovic, A.; Gruijters, S.H.L.L.; Dubelaar, C.W.; Maljers, D.

    2009-01-01

    Silica sand, (almost) pure quartz sand, is a valuable and scarce mineral resource within the shallow Dutch subsurface. High-grade deposits are exploited in the southeastemmost part of the country, as raw material for the glass, ceramic, chemical and other process industries. Dutch land-use policy re

  7. Understanding Colombian Amazonian white sand forests

    NARCIS (Netherlands)

    Peñuela-Mora, M.C.

    2014-01-01

    Although progress has been made in studies on white sand forests in the Amazon, there is still a considerable gap in our knowledge of the unique species composition of white sand forests and their structure and dynamics, especially in Western Amazon. This thesis aims to fill this gap by addressing t

  8. Sand transportation and reverse patterns over leeward face of sand dune

    Science.gov (United States)

    Jiang, Hong; Dun, Hongchao; Tong, Ding; Huang, Ning

    2017-04-01

    Sand saltation has complex interactions with turbulent flow and dune form. Most models of wind-blown sand consider ideal circumstances such as steady wind velocity and a flat surface, and the bulk of data on wind flow and sand transport over an individual dune has focused mostly on the influence of dune shape or inter-dune space on the wind flow, neglecting the effect of morphology on sand saltation, particularly airflow and sand transportation over the leeward slope. Wind flow structures over the leeward slope of sand dunes have a fundamental influence on the organization of sand dunes. In order to understand sand dune dynamics, lee face airflow and sediment transportation should be paid more attention. Previous field observations could not measure turbulent flow structure well because of the limited observation points and the influence of experiment structure on wind field. In addition, the reverse sand particles over leeward face could not be collected by sand trap in field. Numerous field observations could not measure turbulent flow structure because of the limited observation points and the influence of experimental structures on the wind field. In addition, the reverse transport of sand particles over leeward face could not be collected by sand traps in field. Therefore, this paper aims to investigate the turbulent flow structure and sand transport pattern over the leeward slope. A numerical model of sand saltation over slope terrain is constructed, which also considers the coupling effects between air flow and sand particles. The large eddy simulation method is used to model turbulent flow. Sand transport is simulated by tracking the trajectory of each sand particle. The results show that terrain significantly alters the turbulent air flow structure and wind-blown sand movement, especially over the leeward slope. Here, mass flux increases initially and then decreases with height in the reversed flow region in the direction of wind flow, and the mass flux

  9. Altitude of the top of the Sparta Sand and Memphis Sand in three areas of Arkansas

    Science.gov (United States)

    Pugh, Aaron L.; Westerfield, Paul W.; Gonthier, Gerard; Poynter, David T.

    1998-01-01

    The Sparta Sand and Memphis Sand form the second most productive aquifer in Arkansas. The Sparta Sand and Memphis Sand range in thick- ness from 0 to 900 feet, consisting of fine- to medium-grained sands interbedded with layers of silt, clay, shale, and minor amounts of lignite. Within the three areas of interest, the top surface of the Sparta Sand and Memphis Sand dips regionally east and southeast towards the axis of the Mississippi Embayment syncline and Desha Basin. Local variations in the top surface may be attributed to a combination of continued development of structural features, differential compaction, localized faulting, and erosion of the surface prior to subsequent inundation and deposition of younger sediments.

  10. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    Directory of Open Access Journals (Sweden)

    Sunday Isehunwa,

    2010-05-01

    Full Text Available Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field were evaluated. Sand failure mechanisms and contributing parameters were identified and compared with published profiles. The results showed that cohesive stress is the predominant sand failure mechanism. Water cut, bean size and gas oil ratio (GOR impact sand production in the Niger Delta.

  11. Learning Design at White Sands Test Facility

    Science.gov (United States)

    Grotewiel, Shane

    2010-01-01

    During the Fall of 2010, I spent my time at NASA White Sands Test Facility in Las Cruces, NM as an Undergraduate Student Research Program (USRP) Intern. During that time, I was given three projects to work on: Large Altitude Simulation System (LASS) basket strainer, log books, and the design of a case for touch screen monitors used for simulations. I spent most of my time on the LASS basket strainer. The LASS system has a water feed line with a basket strainer that filters out rust. In 2009, there were three misfires which cost approximately $27,000 and about 8% of the allotted time. The strainer was getting a large change in pressure that would result in a shutdown of the system. I have designed a new basket that will eliminate the large pressure change and it can be used with the old basket strainer housing. The LASS system has three steam generators (modules). Documents pertaining to these modules are stored electronically, and the majority of the documents are not able to be searched with keywords, so they have to be gone through one by one. I have come up with an idea on how to organize these files so that the Propulsion Department may efficiently search through the documents needed. Propulsion also has a LASS simulator that incorporates two touch screen monitors. Currently these monitors are in six foot by two foot metal cabinet on wheels. During simulation these monitors are used in the block house and need to be taken out of the block house when not in use. I have designed different options for hand held cases for storing and transporting the monitors in and out of the block house. The three projects previously mentioned demonstrate my contributions to the Propulsion Department and have taught me real world experience that is essential in becoming a productive engineer.

  12. Managing the environmental challenges of oil sand development

    Energy Technology Data Exchange (ETDEWEB)

    Weagle, K. [Cumulative Environmental Management Association, Fort McMurray, AB (Canada)

    2003-07-01

    A brief overview of the development of the oil sand industry in Alberta was provided with reference to proposed projects, government revenue, and jobs in the industry between 1995 and 2002. The major environmental concerns facing the industry are: corporations and environmental risk; the process required by both the federal government and the government of Alberta to address cumulative effects; and, an increased interest in resource development. Self-regulation in the sector was discussed, examining who pays the bills, and the triad of self-regulation. The author described the Cumulative Environmental Management Association (CEMA) as being a multi-shareholder group working to implement sustainable development strategies by promoting management and understanding of cumulative impacts. The 14 themes of CEMA were examined, its goals reviewed, and the corporate structure described. Other challenges facing the oil sands industry originate from the Kyoto Protocol negotiations and construction costs. The Alberta government fosters a climate that encourages continued development in Alberta's oil sands areas. figs.

  13. Opportunities in oil sands production bi-products

    Energy Technology Data Exchange (ETDEWEB)

    Gunardson, H. [Air Products Canada Ltd., Calgary, AB (Canada)

    2006-07-01

    This presentation investigated potential by-products from oil sands production and upgrading facilities, and examined the extent to which carbon dioxide (CO{sub 2}) enhanced oil recovery (EOR) projects can absorb greenhouse gas (GHG) emissions from oil sands developments. Oil sands production by-products included bitumen and petroleum coke; heat; hydrocarbon off-gases; hydrogen; syngas; sulfur; metals; and CO{sub 2} sources from combustion processes and hydrogen production. CO{sub 2} concentrations from flue gases are typically less than 17 per cent, and contain contaminants such as nitrogen, particulates, nitrogen oxide (NO{sub x}) and sulphur dioxide (SO{sub x}). CO{sub 2} concentrations derived from hydrogen production have a high purity and contain water vapour, unreacted hydrocarbons, hydrogen sulphide (H{sub 2}S) and volatile metals. Existing carbon capture technologies are currently not capable of processing large volumes of CO{sub 2}. However, small volumes of CO{sub 2} are used in the manufacturing of carbonated beverages. Larger volumes of CO{sub 2} are used in EOR and coalbed methane (CBM) recovery as well as in CO{sub 2} sequestration. Carbon capture technologies include amine scrubbers, selexol and rectisol gasification processes, and Benfield Catacarb processes. The market price for CO{sub 2} in EOR and gas recovery is approximately $35 per tonne. However, combustion processes typically cost $103 per tonne. CO{sub 2} sources and sinks were also identified. It is estimated that total CO{sub 2} sequestration using EOR will equal 200 mega tonnes by 2030. Apart from gasification processes, all CO{sub 2} sources are uneconomic using current technology. The oil sands industry is in need of a policy framework and support for infrastructure investments for CO{sub 2} pipelines and sequestration facilities. tabs., figs.

  14. Adsorption of dyes on Sahara desert sand.

    Science.gov (United States)

    Varlikli, Canan; Bekiari, Vlasoula; Kus, Mahmut; Boduroglu, Numan; Oner, Ilker; Lianos, Panagiotis; Lyberatos, Gerasimos; Icli, Siddik

    2009-10-15

    Sahara desert sand (SaDeS) was employed as a mineral sorbent for retaining organic dyes from aqueous solutions. Natural sand has demonstrated a strong affinity for organic dyes but significantly lost its adsorption capacity when it was washed with water. Therefore, characterization of both natural and water washed sand was performed by XRD, BET, SEM and FTIR techniques. It was found that water-soluble kyanite, which is detected in natural sand, is the dominant factor affecting adsorbance of cationic dyes. The sand adsorbs over 75% of cationic dyes but less than 21% for anionic ones. Among the dyes studied, Methylene Blue (MB) demonstrated the strongest affinity for Sahara desert sand (Q(e)=11.98 mg/g, for initial dye solution concentration 3.5 x 10(-5)mol/L). The effects of initial dye concentration, the amount of the adsorbent, the temperature and the pH of the solution on adsorption capacity were tested by using Methylene Blue as model dye. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of Methylene Blue on Sahara desert sand followed pseudo-second order kinetics. Gibbs free energy, enthalpy change and entropy change were calculated and found -6411 J/mol, -30360 J/mol and -76.58 J/mol K, respectively. These values indicate that the adsorption is an exothermic process and has a spontaneous nature at low temperatures.

  15. Critical state of sand matrix soils.

    Science.gov (United States)

    Marto, Aminaton; Tan, Choy Soon; Makhtar, Ahmad Mahir; Kung Leong, Tiong

    2014-01-01

    The Critical State Soil Mechanic (CSSM) is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803-0.998, 0.144-0.248, and 1.727-2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  16. Sand Flies and Their Control Methods.

    Science.gov (United States)

    Çetin, Hüseyin; Özbel, Yusuf

    2017-06-01

    The main aim of managing arthropod vectors that carry the disease agents is interrupting the infection cycle. Therefore, the management of the disease implies that all precautions related to all elements (i.e., human, arthropod vector, and reservoir) in the infection cycle need to be taken. There are important points that need to be considered while dealing with sand flies (Diptera: Psychodidae: Phlebotominae), which in many regions worldwide, particularly in tropical and subtropical areas, are vectors of diseases such as leishmaniasis and sand fly fever and are the arthropods of the infection cycle. Because the larval control of the sand flies is very difficult and almost impossible, the management is mainly conducted for the adults. The most effective strategy for reducing both sand fly fever and leishmaniasis is managing sand flies, particularly in areas where humans are located. In this review, the morphology, biology, and taxonomy of sand flies; the integrated fighting and management methods such as insecticide-impregnated bed nets and use of curtains, zooprophylaxis, indoor and outdoor residual applications, larvicides, repellents, and insecticide-impregnated dog collars; and data regarding many issues such as insecticide resistance in sand flies have been emphasized on in the review.

  17. Critical State of Sand Matrix Soils

    Directory of Open Access Journals (Sweden)

    Aminaton Marto

    2014-01-01

    Full Text Available The Critical State Soil Mechanic (CSSM is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803–0.998, 0.144–0.248, and 1.727–2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  18. WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS): Research Implementation Status

    Science.gov (United States)

    Nickovic, Slobodan; Barrie, Leonard

    2010-05-01

    Assessment System (SDS-WAS) in order to improve the capabilities of countries affected by dust to reduce risks associated with airborne sand and dust. This project is in response to the desire of more than 40 WMO member countries to improve capabilities for more reliable sand and dust storm forecasts. The project has strong crosscutting features: it relies on real-time delivery of products; it integrates research communities (modelling, observation groups, and effects) and communities of practice (e.g. medical, aeronautical, agricultural users). There are two already established SDS-WAS nodes (Asian and North-Africa-Europe-Middle East) that coordinate implementation of the project objectives at regional levels. This presentation will review current status and future steps in the project implementation.

  19. Invasive plants on disturbed Korean sand dunes

    Science.gov (United States)

    Kim, Kee Dae

    2005-01-01

    The sand dunes in coastal regions of South Korea are important ecosystems because of their small size, the rare species found in this habitat, and the beautiful landscapes they create. This study investigated the current vegetative status of sand dunes on three representative coasts of the Korean peninsula, and on the coasts of Cheju Island, and assessed the conditions caused by invasive plants. The relationships between the degree of invasion and 14 environmental variables were studied. Plots of sand dunes along line transects perpendicular to the coastal lines were established to estimate vegetative species coverage. TWINSPAN (Two-Way Indicator Species Analysis), CCA (Canonical Correspondence Analysis), and DCCA (Detrended Canonical Correspondence Analysis) were performed to classify communities on sand dunes and assess species composition variation. Carex kobomugi, Elymus mollis, and Vitex rotundifolia were found to be the dominant species plotted on the east, the west, and the peripheral coasts of Cheju Island, respectively. Vegetation on the south coast was totally extinct. The 19 communities, including representative C. kobomugi, C. kobomugi- Ixeris repens, C. kobomugi- Oenothera biennis, E. mollis, Lolium multiflorum- Calystegia soldanella, and V. rotundifolia- C. kobomugi, were all classified according to TWINSPAN. Oenothera biennis and L. multiflorum were exotics observed within these native communities. CCA showed that invasive native and exotic species distribution was segregated significantly, according to disturbance level, exotic species number, gravel, sand and silt contents, as well as vegetation size. It further revealed that human disturbance can strongly favor the settlement of invasive and exotic species. Restoration options to reduce exotic plants in the South Korean sand dune areas were found to be the introduction of native plant species from one sand dune into other sand dune areas, prohibition of building and the introduction of exotic

  20. Historical trends in greenhouse gas emissions of the Alberta oil sands (1970-2010)

    Science.gov (United States)

    Englander, Jacob G.; Bharadwaj, Sharad; Brandt, Adam R.

    2013-12-01

    There has been increased scrutiny of the Alberta oil sands due to their high carbon intensity (CI) relative to conventional crude oil. Relying entirely on public and peer-reviewed data sources, we examine historical trends in the CI of oil sands extraction, upgrading, and refining. Monthly data were collected and interpolated from 1970 to 2010 (inclusive) for each oil sands project. Results show a reduction in oil sands CI over time, with industry-average full-fuel cycle (well-to-wheels, WTW) CI declining from 165 gCO2e MJ-1 higher heating value (HHV) of reformulated gasoline (RFG) to 105 (-12, +9) gCO2e MJ-1 HHV RFG. 2010 averages by production pathways are 102 gCO2e MJ-1 for Mining and 111 gCO2e MJ-1 for in situ. The CI of mining-based projects has declined due to upgrader efficiency improvements and a shift away from coke to natural gas as a process fuel. In situ projects have benefitted from substantial reductions in fugitive emissions from bitumen batteries. Both mining and in situ projects have benefitted from improved refining efficiencies. However, despite these improvements, the CI of oil sands production (on a pathway-average basis) ranges from 12 to 24% higher than CI values from conventional oil production. Due to growing output, total emissions from the oil sands continue to increase despite improved efficiency: total upstream emissions were roughly 65 MtCO2e in 2010, or 9% of Canada’s emissions.

  1. Tar sands. Fuelling the climate crisis, undermining EU energy security and damaging development objectives

    Energy Technology Data Exchange (ETDEWEB)

    Wykes, S.; Heywood, S.; Urbaniak, D. (ed.); De Clerck, P. (ed.)

    2010-05-15

    Tar sands - bitumen that is extracted and upgraded to produce synthetic crude - has been heavily criticised for its poor environmental and social outcomes, locally and globally. Tar sands generates on average 3 to 5 times more greenhouse gas (GHG) emissions than conventional oil, representing a huge threat to climate protection. Canada is currently the only major centre of production but investment is expanding, including by European oil companies such as BP, Shell, Total and ENI. The second part of this report shows which oil companies are increasing their investments in tar sands and oil shale, and where. In Canada, tar sands development is the fastest growing source of GHG emissions and is undermining the country's Kyoto commitments. Tar sands projects are also extremely costly and capital intensive - to the point where investors and analysts have raised concerns about their longer-term financial viability in a world where the introduction of low-carbon regulation and reduced demand for expensive fossil fuels are increasingly likely. A more strategic approach to energy policy would encourage redirection of the hundreds of billions to be invested over the next decade in tar sands production in Canada alone into development of renewable fuel technologies and energy efficiency measures.

  2. Numerical research on evolvement of submarine sand waves in the Northern South China Sea

    Science.gov (United States)

    Zhou, Qikun; Hu, Guanghai; Sun, Yongfu; Liu, Xiaohui; Song, Yupeng; Dong, Lifeng; Dong, Changming

    2016-05-01

    Submarine sand waves, vital to seabed stability, are an important consideration for oceanic engineering projects such as oil pipe lines and submarine cables. The properties of surface sediment and the evolvement of submarine sand waves in a specified area in the South China Sea are studied using both a hydrological model and field observational data. The bottom flow field data between 2010 and 2011 in the study area are simulated by the Regional Ocean Model System (ROMS). The migration of submarine sand waves is calculated using Rubin's formula along with typhoon data and bottom flow field data, which allows for the analysis of sand wave response under the influence of typhoons. The migration direction calculated by Rubin's formula and bottom flow are very similar to collected data. The migration distance of different positions is between 0.0 m and 21.8 m, which reciprocates cumulatively. This shows that Rubin's formula can predict the progress of submarine sand waves with the bottom flow simulated by ROMS. The migration distances of 2 sites in the study area are 2.0 m and 2.9 m during the typhoon "Fanapi". The proportion of the calculated migration distance by the typhoon is 9.17% and 26.36% of the annual migration distance, respectively, which proves that the typhoon can make a significant impact on submarine sand waves.

  3. Numerical research on evolvement of submarine sand waves in the Northern South China Sea

    Science.gov (United States)

    Zhou, Qikun; Hu, Guanghai; Sun, Yongfu; Liu, Xiaohui; Song, Yupeng; Dong, Lifeng; Dong, Changming

    2017-03-01

    Submarine sand waves, vital to seabed stability, are an important consideration for oceanic engineering projects such as oil pipe lines and submarine cables. The properties of surface sediment and the evolvement of submarine sand waves in a specified area in the South China Sea are studied using both a hydrological model and field observational data. The bottom flow field data between 2010 and 2011 in the study area are simulated by the Regional Ocean Model System (ROMS). The migration of submarine sand waves is calculated using Rubin's formula along with typhoon data and bottom flow field data, which allows for the analysis of sand wave response under the influence of typhoons. The migration direction calculated by Rubin's formula and bottom flow are very similar to collected data. The migration distance of different positions is between 0.0 m and 21.8 m, which reciprocates cumulatively. This shows that Rubin's formula can predict the progress of submarine sand waves with the bottom flow simulated by ROMS. The migration distances of 2 sites in the study area are 2.0 m and 2.9 m during the typhoon "Fanapi". The proportion of the calculated migration distance by the typhoon is 9.17% and 26.36% of the annual migration distance, respectively, which proves that the typhoon can make a significant impact on submarine sand waves.

  4. Formation mechanism of cracks in saturated sand

    Institute of Scientific and Technical Information of China (English)

    Xiaobing Lu; Zhemin Zheng; Yongren Wu

    2006-01-01

    The formation mechanism of "water film" (or crack) in saturated sand is analyzed theoretically and numerically.The theoretical analysis shows that there will be no stable "water film" in the saturated sand if the strength of the skeleton is zero and no positions are choked.It is shown by numerical simulation that stable water films initiate and grow if the choking state keeps unchanged once the fluid velocities decrease to zero in the liquefied sand column.The developments of "water film" based on the model presented in this paper are compared with experimental results.

  5. Lund Sand No 0:part 2

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  6. Lund Sand No 0:part 1

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  7. Biodegradable materials as foundry moulding sands binders

    Directory of Open Access Journals (Sweden)

    K. Major - Gabryś

    2015-07-01

    Full Text Available The aim of this article is to show the possibility of using biodegradable materials as part of the composition of foundry moulding and core sand binders. Research shows that moulding sands with biodegradable materials selected as binders are not only less toxic but are also better suited to mechanical reclamation than moulding sands with phenol-furfuryl resin. The use of biodegradable materials as additives to typical synthetic resins can result in their decreased toxicity and improved ability to reclamation as well as in accelerated biodegradation of binding material leftovers of mechanical reclamation.

  8. Watching Faults Grow in Sand

    Science.gov (United States)

    Cooke, M. L.

    2015-12-01

    Accretionary sandbox experiments provide a rich environment for investigating the processes of fault development. These experiments engage students because 1) they enable direct observation of fault growth, which is impossible in the crust (type 1 physical model), 2) they are not only representational but can also be manipulated (type 2 physical model), 3) they can be used to test hypotheses (type 3 physical model) and 4) they resemble experiments performed by structural geology researchers around the world. The structural geology courses at UMass Amherst utilize a series of accretionary sandboxes experiments where students first watch a video of an experiment and then perform a group experiment. The experiments motivate discussions of what conditions they would change and what outcomes they would expect from these changes; hypothesis development. These discussions inevitably lead to calculations of the scaling relationships between model and crustal fault growth and provide insight into the crustal processes represented within the dry sand. Sketching of the experiments has been shown to be a very effective assessment method as the students reveal which features they are analyzing. Another approach used at UMass is to set up a forensic experiment. The experiment is set up with spatially varying basal friction before the meeting and students must figure out what the basal conditions are through the experiment. This experiment leads to discussions of equilibrium and force balance within the accretionary wedge. Displacement fields can be captured throughout the experiment using inexpensive digital image correlation techniques to foster quantitative analysis of the experiments.

  9. Sand erosion at the toe of a gabion-protected dune face

    NARCIS (Netherlands)

    Chapman, A.

    1992-01-01

    The purpose of this research project was to study the manner in which erosion takes place the the toe of a dune slope protected by gabions, and to examine the response of the gabions to this erosion. A sand slope overlaid by model gabions was subjected to wave attack in a hydraulic flume, and period

  10. Drift sands, lakes, and soils: the multiphase Holocene history of the Laarder Wasmeren area near Hilversum

    NARCIS (Netherlands)

    Sevink, J.; Koster, E.A.; van Geel, B.; Wallinga, J.

    2013-01-01

    A unique complex of multiphased Holocene drift sands and paleosols, with at least two lacustrine phases, was discovered during a major sanitation project in the Laarder Wasmeren area near Hilversum, the Netherlands. The complex could be studied in detail, highly facilitated by the excellent and larg

  11. Post-Secondary Learning Priorities of Workers in an Oil Sands Camp in Northern Alberta

    Science.gov (United States)

    Fahy, Patrick J.; Steel, Nancy

    2008-01-01

    This paper reports results to date of a three-year project by Athabasca University, intended to determine the education and training needs and interests of employees in a work camp in northern Alberta's oil sands. (Future reports will address results of efforts to provide programming suiting the needs identified, and the uptake, satisfaction,…

  12. The sand extraction potential of embedded land surface lowering in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Kleine, M.P.E. de; Veldkamp, J.G.; Dubelaar, C.W.; Pietersen, H.S.

    2004-01-01

    In the Netherlands, mineral extraction by means of dredging or quarrying meets with considerable societal resistance. Land surface lowering prior to large land reconstruction projects may raise fewer objections. We have calculated the potential yields of sand and gravel from land surface lowering

  13. The sand extraction potential of embedded land surface lowering in the Netherlands

    NARCIS (Netherlands)

    Van der Meulen, M.J.; De Kleine, M.P.E.; Veldkamp, J.G.; Dubbelaar, C.W.; Pietersen, H.S.

    2004-01-01

    In the Netherlands, mineral extraction by means of dredging or quarrying meets with considerable societal resistance. Land surface lowering prior to large land reconstruction projects may raise fewer objections. We have calculated the potential yields of sand and gravel form land surface lowering

  14. Effect of Chromite-Silica Sands Characteristics on Performance of Ladle Filler Sands for Continuous Casting

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Free opening rate is mainly determined by the performance of the ladle filler sand. High free opening rates of ladles are required in steel making to improve steel quality. Chromite ladle filler sands are one of the most widely used ladle filler sand. Several operative variables and materials characteristics affect the performance of the sands. Three sets of chromite ladle filler sands were selected and researches were focused on the sintering hehaviour and per- formance of the sands under operative conditions. The effect of particle size distribution on sintering, microstruc- ture, flowability, and permeability were presented. In all cases, the particle size varies from 0.1 to 1.5 mm corre- sponding to free flowing powders. One of the samples has higher permeability factor in comparison with others due to low particle size distribution. The other sample presents very good free opening due to its very good flowability and permeability factor.

  15. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    Global applications of pesticides in agricultural production have led to the detection of trace amounts of pesticides in groundwater resources in levels exceeding the EU threshold limit for drinking water of 0.1 µg L-1. Pesticide-polluted groundwater may be remediated by inoculating waterworks sand...... for degradation performances in flow-through sand columns, with the aim of identifying a suitable inoculant strain for future environmental applications. Another aim was to identify a suitable genetic marker to monitor phenoxy acid degradation in strain Sphingobium sp. PM2. We were not able to link motility...... and biofilm formation to the strains´ ability to adhere to sand. Nevertheless, a correlation was found between cell surface hydrophobicity and adhesion and overall degradation performances in flow-through sand columns. We identified S phingobium sp. PM2 as a promising inoculant strain, displaying efficient...

  16. Petrophysical Analysis of Oil Sand in Athabasca

    Science.gov (United States)

    cheong, S.; Lee, H.

    2013-12-01

    Oil sands are the major unconventional energy sources which have great reserves in Alberta, Canada. Recovery techniques such as CSS (Cyclic Steam Stimulation) and SAGD (Steam Assisted Gravity Drainage) enabled to develop deeper bitumen about several hundred meter depth. Before applying CSS and SAGD, reservoir heterogeneity of mud barriers or shale breccias should be clarified to establish injection and production wells successfully. We conducted the integrated petro-physical analysis for oil sands deposits in Athabasca by correlating well logs with seismic data. From 33 well logs and 3D seismic, we have made P-wave impedance by recursive inversion. Target formations of our analysis were the top of Wabiskaw member. Using inverted impedance and multi-attributes, porosity volume was derived at a target depth. Porosity of time slice 375 ms ranged 20 ~ 40 % stretching porous sand body from NE to SW direction. Characteristics of porosity distribution may be useful to design optimum oil sands recovery in Athabasca.

  17. Carbon cycle: New pathways in the sand

    Science.gov (United States)

    Rao, Alexandra

    2017-01-01

    Organic carbon decomposition in anoxic marine sediments was thought to be dominated by bacteria, but experimental data and microbial culture studies now show that microalgae buried in coastal sands may also play an important role in carbon turnover.

  18. K West Basin Sand Filter Backwash Sample Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smoot, Margaret R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Coffey, Deborah S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pool, Karl N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    A sand filter is used to help maintain water clarity at the K West Basin where highly radioactive sludge is stored. Eventually that sand filter will require disposal. The radionuclide content of the solids trapped in the sand filter will affect the selection of the sand filter disposal pathway. The Pacific Northwest National Laboratory (PNNL) was contracted by the K Basin Operations & Plateau Remediation Project (operations contractor CH2M Hill) to analyze the radionuclide content of the solids collected from the backwash of the K West Basin sand filter. The radionuclide composition in the sand filter backwash solids will be used by CH2M Hill to determine if the sand filter media and retained sludge solids will be designated as transuranic waste for disposal purposes or can be processed through less expensive means. On October 19, 2015, K Basin Operations & Plateau Remediation Project staff backwashed the sand filter into the North Load-Out Pit (NLOP) and immediately collected sample slurry from a sampling tube positioned 24 in. above the NLOP floor. The 764 g sand filter backwash slurry sample, KW-105 SFBW-001, was submitted to PNNL for analysis on October 20, 2015. Solids from the slurry sample were consolidated into two samples (i.e., a primary and a duplicate sample) by centrifuging and measured for mass (0.82 g combined – wet centrifuged solids basis) and volume (0.80 mL combined). The solids were a dark brown/orange color, consistent with iron oxide/hydroxide. The solids were dried; the combined dry solids mass was 0.1113 g, corresponding to 0.0146 weight percent (wt%) solids in the original submitted sample slurry. The solids were acid-digested using nitric and hydrochloric acids. Insoluble solids developed upon dilution with 0.5 M HNO3, corresponding to an average 6.5 wt% of the initial dry solids content. The acid digestate and insoluble solids were analyzed separately by gamma spectrometry. Nominally, 7.7% of the 60Co was present

  19. CRADE OF SAND AND DUST STORM WEATHER

    Institute of Scientific and Technical Information of China (English)

    Niu Ruoyun; Tian Cuiying; Bi Baogui; Yang Keming; Wang Youheng; Tuo Ya; Ding Haifang; Zhang Tairen

    2011-01-01

    Background Sand and dust storm,as one of the main disastrous weathers that affect northern China,not only affect the people health and normal life,but cause the short-term climatic changes due to the direct and indirect radiation of the earth-atmosphere system through the dust floating in the sky.The sand end dust weather and its potential harm on the national economy,ecological environment,social activities and other aspects have aroused worldwide concern.

  20. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  1. Response to Oil Sands Products Assessment

    Science.gov (United States)

    2015-09-01

    Tailings ponds are an operating facility common to all types of surface mining. For oil sands, tailings consisting of water , sand, clay, and residual ...oil, are pumped to these basins—or ponds— where settling occurs and water is recycled for reuse in the process. When the ponds are no longer required...of crude oil transported by tank vessel in Washington waters . In a 2013 Bloomburg Business news article , Dan Murtaugh states, “The dock probably

  2. Treating tar sands formations with dolomite

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J.; Karanikas, John Michael

    2010-06-08

    Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

  3. Pragmatics of reclaimed sand quality assessment recovered nowadays from various used sand systems

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2010-04-01

    Full Text Available The assessment of the reclamation degree of used sands is not a simple, clearly defined issue. The great variety of technologies ofmoulding and core sands, based on the organic and inorganic binders does not allow the use of a single, universal index assessing thedegree of reclamation. The article presents the problems of research relating to selection of proper criteria for assessing the degree ofreclamation process of used moulding and core sands deriving from different technologies. The most often applied in practice types ofused sands and the most adequate in practice methods of assessing the degrees of their reclamation were characterized.

  4. Sand Dune Encroachment and Desertification Processes of the Rigboland Sand Sea, Central Iran.

    Science.gov (United States)

    Ahmady-Birgani, Hesam; McQueen, Kenneth G; Moeinaddini, Mazaher; Naseri, Hamidreza

    2017-05-08

    Early studies on sand dune movement and desertification in Iran have not always been convincingly demonstrated because of problems with the field-based measurements. In some areas where various land uses have been engulfed by aeolian sand dunes, desertification is clear, but in other less settled areas, it may not be so obvious. The objective of this study is to demonstrate encroachments of the Rigboland sand sea, central Iran, in its different directions and variable magnitude rates. Determining the rate and direction of the sand sea movements is critical for specifying which lands should be prioritized and quickly protected. The study has trialed a change detection technique which uses a Cross-Tabulation module to compare two available LandsatTM images over the Rigboland sand sea. This indicates that within a ten-year span (from 1988 to 1998) more than 200 ha/yr were added to the Rigboland sand sea, from the alluvial fan landforms in the eastern upstream, outer margins of the Rigboland sand sea. Coupled with GIS techniques, this type of analysis of the remote sensing (RS) images provides an effective tool for the monitoring and prognostication of sand dune movement and sand sea change.

  5. Analysis of sand particles' lift-off and incident velocities in wind-blown sand flux

    Institute of Scientific and Technical Information of China (English)

    Tian-Li Bo; Xiao-Jing Zheng; Shao-Zhen Duan; Yi-Rui Liang

    2013-01-01

    In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to windblown sand flux.In this paper,we achieved wind tunnel measurements of the movement of sand particles near sand bed through improving the wind tunnel experimental scheme of paticle image velocimetry (PIV) and data processing method.And then the influence of observation height on the probability distributions of lift-off and incident velocities of sand particles was analyzed.The results demonstrate that the observation height has no obvious influence on the distribution pattern of the lift-off and incident velocities of sand particles,i.e.,the probability distribution of horizontal and vertical velocities of lift-off and incident sand particles follow a Gaussian distribution and a negative exponential distribution,respectively.However,it influences the center of the Gaussian distribution,the decay constant and the amplitude of the negative exponential distribution.

  6. Recent Sand Avalanching on Rabe Crater Dunes

    Science.gov (United States)

    2000-01-01

    Dark streaks on the steep, down-wind slopes of sand dunes in Rabe Crater are seen at several locations in this Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image. These streaks indicate relatively recent (i.e., in the past few years or less) movement of sand down these slopes.Sand dunes move forward by the combined action of wind that drives sand up the shallow slope on the windward side of the dune (in this case, the slopes that face toward the lower right) and the avalanching of this sand down the steeper, lee-side slope. The steep slope is also known as the slip face. The dark streaks indicated by arrows are evidence for sand avalanches that occurred within a few months or years of the time when the picture was taken in March 1999. Other streaks which are seen criss-crossing the dunes may be the result of passing dust devils. This image is illuminated from the upper left and located in Rabe Crater of the Hellespontus-Noachis region near 44.2oS, 325.6oW.

  7. Discrete particle simulation of mixed sand transport

    Institute of Scientific and Technical Information of China (English)

    Fengjun Xiao; Liejin Guo; Debiao Li; Yueshe Wang

    2012-01-01

    An Eulerian/Lagrangian numerical simulation is performed on mixed sand transport.Volume averaged Navier-Stokes equations are solved to calculate gas motion,and particle motion is calculated using Newton's equation,involving a hard sphere model to describe particle-to-particle and particle-to-wall collisions.The influence of wall characteristics,size distribution of sand particles and boundary layer depth on vertical distribution of sand mass flux and particle mean horizontal velocity is analyzed,suggesting that all these three factors affect sand transport at different levels.In all cases,for small size groups,sand mass flux first increases with height and then decreases while for large size groups,it decreases exponentially with height and for middle size groups the behavior is in-between.The mean horizontal velocity for all size groups well fits experimental data,that is,increasing logarithmically with height in the middle height region.Wall characteristics greatly affects particle to wall collision and makes the flat bed similar to a Gobi surface and the rough bed similar to a sandy surface.Particle size distribution largely affects the sand mass flux and the highest heights they can reach especially for larger particles.

  8. Predicting the occurrence of sand banks in the North Sea

    NARCIS (Netherlands)

    Veen, van der Henriët H.; Hulscher, Suzanne J.M.H.

    2009-01-01

    Sand banks have a wavelength between 1 and 10 km, and they are up to several tens of meters high. Also, sand banks may have an impact on large-scale human activities that take place in the North Sea like sand mining, shipping, offshore wind farms, etc. Therefore, it is important to know where sand b

  9. Oluvil Port Development Project

    DEFF Research Database (Denmark)

    Frigaard, Peter; Margheritini, Lucia

    Oluvil Port Development Project is the first development of a large port infrastructure in the entire eastern coastline of Sri Lanka. The project is supported by the Danish Foreign Ministry. Feasibility studies and detailed design studies were carried out by Lanka Hydraulic Institute Ltd during...... the years 1995 to 2003. The design was reviewed by COWI a/s. Construction of the port was started in 2008. MT Højgaard a/s acted as contractor. The outer breakwaters were constructed as first part of the project. During and after completion of the breakwaters a serious beach erosion and sand accumulation...... has been observed. Severe erosion is seen north of the harbour and some accumulation of sand is seen south of the harbour. On a sandy coastline like the one in Oluvil such erosion problems as observed are very typical. The report: Oluvil Port Development Project: Studies on Beach Erosion written...

  10. Development of the Gran Desierto sand sea, northwestern Mexico

    Science.gov (United States)

    Blount, Grady; Lancaster, Nicholas

    1990-08-01

    Three major eolian sand populations can be recognized in the Gran Desierto sand sea of northwestern Mexico by using spectral data from the Landsat thematic mapper in conjunction with textural and mineralogical studies of surface sands. Each sand population has distinct textural, mineralogic, and spectral properties that can be related to sand-dune morphology and position with reference to source areas and transport paths of the sands. The oldest eolian sediment in the sand sea was derived from the early to middle Pleistocene Colorado River that flowed through the area of the western Gran Desierto. Subsequent inputs of eolian sands came from the area of the present Colorado River valley and the coast south of the sand sea. The spatial and temporal pattern of eolian deposition in the region has been controlled by Quaternary tectonic and climatic changes, resulting in the episodic input and deposition of sand.

  11. Effects of advanced oxidation on green sand properties via iron casting into green sand molds.

    Science.gov (United States)

    Wang, Yujue; Cannon, Fred S; Voigt, Robert C; Komarneni, Sridhar; Furness, J C

    2006-05-01

    The effects of advanced oxidation (AO) processing on the properties of green sand were studied via pouring cast iron into green sand molds. Upon cooling, the green sand molds were autopsied at various distances from the metal-sand interface. Autopsy green sand samples collected from a mold that incorporated AO water were characterized and compared to controlled samples collected from a similar autopsied mold made with conventional tap water (TAP). It was found that the AO processing removed a coating of coal pyrolysis products from the clay surface that typically accumulated on the clay surface. As a result, the AO-conditioned green sand retained 10-15% more active clay as measured bythe standard ultrasonic methylene blue titration than did the TAP-conditioned green sand. The AO processing also nearly doubled the generation of activated carbon from the normalized amount of coal composition of the green sand during the casting process. The AO-enhanced activated carbon generation and the AO-incurred clay surface cleaning provided the AO-conditioned green sand with higher normalized pore volume, and thus higher normalized m-xylene adsorption capacity, i.e., relative to before-metal-pouring conditions. Furthermore, mathematical analysis indicated that the AO-conditioned green sand better retained its important properties after pouring than did the TAP-conditioned green sand. Effectively, this meant after metal pouring, the AO-conditioned sample offered about the same net properties as the TAP-conditioned sample, even though the AO-conditioned sample contained less clay and coal before metal pouring. These results conformed to the full-scale foundry empirical finding that when AO is used, foundries need less makeup clay and coal addition through each casting cycle, and they release less air emissions.

  12. Relationship Between Casting Distortion, Mold Filling, and Interfacial Heat Transfer in Sand Molds

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Parker; K. A. Woodbury; T. S. Piwonka; Y. Owusu

    1999-09-30

    This project sought to determine the relationship between casting dimensions and interfacial heat transfer in aluminum alloy sand castings. The program had four parts; measurement of interfacial heat transfer coefficients in resin bonded and green sand molds, the measurement of gap formation in these molds, the analysis of castings made in varying gatings, orientations and thicknesses, and the measurement of residual stresses in castings in the as-cast and gate removed condition. New values for interfacial heat transfer coefficients were measured, a novel method for gap formation was developed, and the variation of casting dimensions with casting method, gating, and casting orientation in the mold was documented.

  13. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice-age deposits were reactivated as drift sand du

  14. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand du

  15. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand

  16. Life cycle greenhouse gas emissions of current oil sands technologies: GHOST model development and illustrative application.

    Science.gov (United States)

    Charpentier, Alex D; Kofoworola, Oyeshola; Bergerson, Joule A; MacLean, Heather L

    2011-11-01

    A life cycle-based model, GHOST (GreenHouse gas emissions of current Oil Sands Technologies), which quantifies emissions associated with production of diluted bitumen and synthetic crude oil (SCO) is developed. GHOST has the potential to analyze a large set of process configurations, is based on confidential oil sands project operating data, and reports ranges of resulting emissions, improvements over prior studies, which primarily included a limited set of indirect activities, utilized theoretical design data, and reported point estimates. GHOST is demonstrated through application to a major oil sands process, steam-assisted gravity drainage (SAGD). The variability in potential performance of SAGD technologies results in wide ranges of "well-to-refinery entrance gate" emissions (comprising direct and indirect emissions): 18-41 g CO(2)eq/MJ SCO, 9-18 g CO(2)eq/MJ dilbit, and 13-24 g CO(2)eq/MJ synbit. The primary contributor to SAGD's emissions is the combustion of natural gas to produce process steam, making a project's steam-to-oil ratio the most critical parameter in determining GHG performance. The demonstration (a) illustrates that a broad range of technology options, operating conditions, and resulting emissions exist among current oil sands operations, even when considering a single extraction technology, and (b) provides guidance about the feasibility of lowering SAGD project emissions.

  17. Shining a light on oil sands production : spectroscopy could bring flash of insight to ore processing

    Energy Technology Data Exchange (ETDEWEB)

    Zlotnikov, D.

    2010-09-15

    Oil sands are a mixture of silts, sands and clay, and the variability poses challenges to surface mine operators. A professor of Earth and Atmospheric Sciences at the University of Alberta has been working on a spectroscopy project to provide the oil sand industry with real-time ore composition and particle size readings from the mine face. These can then be used to adjust processing conditions at the extraction plant or froth treatment facility, ensuring optimal recovery levels and smooth operation. Developing a spectrographic fingerprint of an ore sample involves shining a very narrow wavelength of light at the sample, recording the intensity of reflected light and repeating the process across a range of wavelengths. The challenges of putting the spectroscopic equipment at the mine site were described. The project is 1 of the more than 20 projects currently at the Centre for Oil Sands Innovation (COSI), a partnership between Imperial Oil and the University of Alberta. Imperial contributed $10 million in funding over the following 5 years, with the governments of Alberta and Canada contributing additional funds. Imperial Oil is not the only beneficiary of COSI research, as all work that comes out of COSI is ultimately published. 1 fig.

  18. Bright sand/dark dust: The identification of active sand surfaces on the Earth and Mars

    Science.gov (United States)

    Blount, H. G., II; Greeley, R.; Christensen, P. R.; Arvidson, R.

    1987-05-01

    Field studies and analysis of LANDSAT Thematic Mapper data in the Gran Desierto, Mexico may shed light on a technique to distinguish active from inactive (relict) sand surfaces. Active sand bodies in the study area are consistently brighter (by an average of 20%) at visual and near infrared wavelengths and darker at thermal infrared wavelengths than compositionally similar inactive sands. The reasons for the albedo difference between active and inactive sands are reviewed and the mixing model of Johnson et al. is examined for tracing the provenance of sands based on albedo and spectral variations. Portions of the wavelengths covered by the Mars Orbiter correspond to the Thematic Mapper data. The identification of active sands on Earth, with a priori knowledge of bulk composition and grain size distribution, may allow the remote mapping of active sand surfaces on Mars. In conjuction with thermal infrared remote sensing for composition, it may also provide a method for the remote determination of grain size distributions within sand/silt mixtures.

  19. Simulating and understanding sand wave variation: A case study of the Golden Gate sand waves

    Science.gov (United States)

    Sterlini, F.; Hulscher, S.J.M.H.; Hanes, D.M.

    2009-01-01

    In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the opportunity to study sand wave variation between locations, within one well-measured, large area. The nonlinear model used in this paper is presently the only tool that provides information on the nonlinear evolution of large-amplitude sand waves. The model is used to increase our understanding of the coupling between the variability in environmental conditions and the sand wave characteristics. Results show that the model is able to describe the variation in the Golden Gate sand waves well when both the local oscillating tidal current and the residual current are taken into account. Current and water depth seem to be the most important factors influencing sand wave characteristics. The simulation results give further confidence in the underlying model hypothesis and assumptions. Copyright 2009 by the American Geophysical Union.

  20. MORPHOMETRIC CHARACTERIZATION OF THE SAND FRACTION IN A SAND GRAIN IMAGE CAPTURE SYSTEM1

    Directory of Open Access Journals (Sweden)

    Lucimar Arruda Viana

    Full Text Available ABSTRACT Morphology studies assume significant importance in analysis of phenomena of granular systems packaging, in particular with a view to the use of the technique of soil stabilization named particle size correction in forest roads. In this context, this study aimed to develop and operationalize a Sand Grain Image Capture System and, hereby, determine the morphological indices of the sand fractions of two sandy soils called João Pinheiro (JP and Cachoeira da Prata (CP. Soil samples, air-dried, were sieved (2.0 mm nominal mesh size for removal of gravels. The materials that passed through the sieve were subjected to dispersion, washing in 0.053 mm nominal mesh size sieve, removal of organic matter and iron oxides to obtain the clean sand fractions. Subsequently, each soil sample was sieved for separation into twelve classes, between the diameters of 0.149 mm and 1.190 mm, using a Rotap shaker. Next, tests were carried out to characterize the morphometric attributes of the twelve classes of sand fractions of the soils studied. For validation of the performance of the Sand Grain Image Capture System, the results were compared to those obtained using a standard procedure for image analysis. The analysis of the results led to the following conclusions: (i the sand fraction of the JP soil presented higher values for the morphometric indices roundness, elongation and compactness compared to sand fraction of the CP soil; and (ii the Sand Grain Image Capture System worked properly, with practicality.

  1. Probability of rebound and eject of sand particles in wind-blown sand movement

    Institute of Scientific and Technical Information of China (English)

    Li Xie; Xiaojing Zheng

    2007-01-01

    When incident particles impact into a sand bed in wind-blown sand movement, rebound of the incident particles and eject of the sand particles by the incident particles affect directly the development of wind sand flux. In order to obtain rebound and eject lift-off probability of the sand particles, we apply the particle-bed stochastic collision model presented in our pervious works to derive analytic solutions of velocities of the incident and impacted particles in the postcollision bed. In order to describe randomness inherent in the real particle-bed collision, we take the incident angle, theimpact position and the direction of resultant action of sand particles in sand bed on the impacted sand particle as random variables, and calculate the rebound and eject velocities,angles and coefficients (ratio of rebound and eject velocity to incident velocity). Numerical results are found in accordance with current experimental results. The rebound and eject lift-off probabilities versus the incident and creeping velocities are predicted.

  2. Pretreatment of turkey fat-containing wastewater in coarse sand and gravel/coarse sand bioreactors.

    Science.gov (United States)

    Gaur, Rashmi Singh; Cai, Ling; Tuovinen, Olli H; Mancl, Karen M

    2010-02-01

    Fat, oil and grease in wastewater can be difficult to treat because of their slow decomposition. Traditional pretreatment facilities to remove fat, oil and grease from wastewater are increasingly costly. The hypothesis in this study was that pretreatment of animal fat-containing wastewater in sand and sand/gravel filters facilitates the conversion of slowly degradable organic matter measured as the difference between chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD(5)) for subsequent biological treatment. The pretreatment was evaluated using simulated turkey-processing wastewater and coarse sand and sand/gravel filters at a constant hydraulic loading rate of 132L/m(2)/day. Two types of fixed media reactors were employed: (i) one set with a varying depth of coarse sand, and (ii) the second was similar but with an additional pea gravel cap. The results indicated that the relative removal of COD was slightly improved in the sand bioreactors with a pea gravel cap irrespective of the depth of coarse sand, but partial conversion to BOD(5) was not consistently demonstrated. Pea gravel may act as a sieve to entrap organic matter including fat globules from the wastewater. Multiple dosing at the same daily loading rate slightly improved the treatment efficiency of the sand bioreactors. The ratios of influent-COD/effluent-COD were always greater than 1.0 following a change in the dosing frequency after a rest period, suggesting that organic matter, specifically fat globules in this case, was retained by the column matrix.

  3. Western Gas Sands Project Quarterly Basin Activities Report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-04-30

    This quarterly basin activities report is a summation of three months drilling and testing activities in the Greater Green River Basin, Northern Great Plains Province, Piceance Basin, and Uinta Basin. Detailed information is given for each study area for the first quarter of 1979.

  4. Western Gas Sands Project. Quarterly Basin Activities Report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-01-31

    This report is a summation of 3 months' drilling and testing activities in the four primary WGSP study areas: Greater Green River Basin, Northern Great Plains Province, Piceance Basin, and Uinta Basin. The monitoring of basin activities is part of resource assessment. (DLC)

  5. Detection of Salmonella enterica Serovar Montevideo and Newport in Free-ranging Sea Turtles and Beach Sand in the Caribbean and Persistence in Sand and Seawater Microcosms.

    Science.gov (United States)

    Ives, A-K; Antaki, E; Stewart, K; Francis, S; Jay-Russell, M T; Sithole, F; Kearney, M T; Griffin, M J; Soto, E

    2017-09-01

    Salmonellae are Gram-negative zoonotic bacteria that are frequently part of the normal reptilian gastrointestinal flora. The main objective of this project was to estimate the prevalence of non-typhoidal Salmonella enterica in the nesting and foraging populations of sea turtles on St. Kitts and in sand from known nesting beaches. Results suggest a higher prevalence of Salmonella in nesting leatherback sea turtles compared with foraging green and hawksbill sea turtles. Salmonella was cultured from 2/9 and identified by molecular diagnostic methods in 3/9 leatherback sea turtle samples. Salmonella DNA was detected in one hawksbill turtle, but viable isolates were not recovered from any hawksbill sea turtles. No Salmonella was detected in green sea turtles. In samples collected from nesting beaches, Salmonella was only recovered from a single dry sand sample. All recovered isolates were positive for the wzx gene, consistent with the O:7 serogroup. Further serotyping characterized serovars Montevideo and Newport present in cloacal and sand samples. Repetitive-element palindromic PCR (rep-PCR) fingerprint analysis and pulsed-field gel electrophoresis of the 2014 isolates from turtles and sand as well as archived Salmonella isolates recovered from leatherback sea turtles in 2012 and 2013, identified two distinct genotypes and four different pulsotypes, respectively. The genotyping and serotyping were directly correlated. To determine the persistence of representative strains of each serotype/genotype in these environments, laboratory-controlled microcosm studies were performed in water and sand (dry and wet) incubated at 25 or 35°C. Isolates persisted for at least 32 days in most microcosms, although there were significant decreases in culturable bacteria in several microcosms, with the greatest reduction in dry sand incubated at 35°C. This information provides a better understanding of the epizootiology of Salmonella in free-ranging marine reptiles and the potential

  6. Effects of full-scale beach renovation on fecal indicator levels in shoreline sand and water.

    Science.gov (United States)

    Hernandez, Rafael J; Hernandez, Yasiel; Jimenez, Nasly H; Piggot, Alan M; Klaus, James S; Feng, Zhixuan; Reniers, Ad; Solo-Gabriele, Helena M

    2014-01-01

    Recolonization of enterococci, at a non-point source beach known to contain high background levels of bacteria, was studied after a full-scale beach renovation project. The renovation involved importation of new exogenous sand, in addition to infrastructure improvements. The study's objectives were to document changes in sand and water quality and to evaluate the relative contribution of different renovation activities towards these changes. These objectives were addressed: by measuring enterococci levels in the sand and fecal indicator bacteria levels (enterococci and fecal coliform) in the water, by documenting sediment characteristics (mineralogy and biofilm levels), and by estimating changes in observable enterococci loads. Analysis of enterococci levels on surface sand and within sediment depth cores were significantly higher prior to beach renovation (6.3-72 CFU/g for each sampling day) when compared to levels during and after beach renovation (0.8-12 CFU/g) (P < 0.01). During the renovation process, sand enterococci levels were frequently below detection limits (<0.1 CFU/g). For water, exceedances in the regulatory thresholds that would trigger a beach advisory decreased by 40% for enterococci and by 90% for fecal coliform. Factors that did not change significantly between pre- and post- renovation included the enterococci loads from animals (approx. 3 × 10(11) CFU per month). Factors that were observed to change between pre- and post- renovation activities included: the composition of the beach sand (64% versus 98% quartz, and a significant decrease in biofilm levels) and loads from direct stormwater inputs (reduction of 3 × 10(11) CFU per month). Overall, this study supports that beach renovation activities contributed to improved sand and water quality resulting in a 50% decrease of observable enterococci loads due to upgrades to the stormwater infrastructure. Of interest was that the change in the sand mineralogy also coincided with changes in biofilm

  7. Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 and Smart Autonomous Sand-Swimming Excavator

    Science.gov (United States)

    Sandy, Michael

    2015-01-01

    The Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 is an excavation robot for mining regolith on a planet like Mars. The robot is programmed using the Robotic Operating System (ROS) and it also uses a physical simulation program called Gazebo. This internship focused on various functions of the program in order to make it a more professional and efficient robot. During the internship another project called the Smart Autonomous Sand-Swimming Excavator was worked on. This is a robot that is designed to dig through sand and extract sample material. The intern worked on programming the Sand-Swimming robot, and designing the electrical system to power and control the robot.

  8. EURIPIDES, load tests on large driven piles in dense silica sands

    Energy Technology Data Exchange (ETDEWEB)

    Zuidberg, H.M.; Vergobbi, P.

    1996-12-31

    In 1995 an extensive load testing program was conducted on 30 inch pipe piles in dense silica sands similar to those found in the southern North Sea. A highly instrumented pile was driven at one location, extracted and redriven at a second location. A total of twelve static compression and tension load tests were performed at three penetration depths between 30 and 47 meters. Test objectives included acquiring reliable data on capacity of offshore type piles in sands which hitherto were hardly available and to understand the failure mechanisms in order to improve current foundation design. The paper describes the design of the testing program and project organization and funding. Details of the test pile and instrumentation to measure the loads in the pile and the pile-sand interaction are highlighted with an emphasis on quality of the measurements. The field-work and innovative testing facilities are also described.

  9. Oil sands operations as a large source of secondary organic aerosols

    Science.gov (United States)

    Liggio, John; Li, Shao-Meng; Hayden, Katherine; Taha, Youssef M.; Stroud, Craig; Darlington, Andrea; Drollette, Brian D.; Gordon, Mark; Lee, Patrick; Liu, Peter; Leithead, Amy; Moussa, Samar G.; Wang, Danny; O'Brien, Jason; Mittermeier, Richard L.; Brook, Jeffrey R.; Lu, Gang; Staebler, Ralf M.; Han, Yuemei; Tokarek, Travis W.; Osthoff, Hans D.; Makar, Paul A.; Zhang, Junhua; L. Plata, Desiree; Gentner, Drew R.

    2016-06-01

    Worldwide heavy oil and bitumen deposits amount to 9 trillion barrels of oil distributed in over 280 basins around the world, with Canada home to oil sands deposits of 1.7 trillion barrels. The global development of this resource and the increase in oil production from oil sands has caused environmental concerns over the presence of toxic compounds in nearby ecosystems and acid deposition. The contribution of oil sands exploration to secondary organic aerosol formation, an important component of atmospheric particulate matter that affects air quality and climate, remains poorly understood. Here we use data from airborne measurements over the Canadian oil sands, laboratory experiments and a box-model study to provide a quantitative assessment of the magnitude of secondary organic aerosol production from oil sands emissions. We find that the evaporation and atmospheric oxidation of low-volatility organic vapours from the mined oil sands material is directly responsible for the majority of the observed secondary organic aerosol mass. The resultant production rates of 45-84 tonnes per day make the oil sands one of the largest sources of anthropogenic secondary organic aerosols in North America. Heavy oil and bitumen account for over ten per cent of global oil production today, and this figure continues to grow. Our findings suggest that the production of the more viscous crude oils could be a large source of secondary organic aerosols in many production and refining regions worldwide, and that such production should be considered when assessing the environmental impacts of current and planned bitumen and heavy oil extraction projects globally.

  10. Capturing phosphates with iron enhanced sand filtration.

    Science.gov (United States)

    Erickson, Andrew J; Gulliver, John S; Weiss, Peter T

    2012-06-01

    Most treatment practices for urban runoff capture pollutants such as phosphorus by either settling or filtration while dissolved phosphorus, typically as phosphates, is untreated. Dissolved phosphorus, however, represents an average 45% of total phosphorus in stormwater runoff and can be more than 95%. In this study, a new stormwater treatment technology to capture phosphate, called the Minnesota Filter, is introduced. The filter comprises iron filings mixed with sand and is tested for phosphate removal from synthetic stormwater. Results indicate that sand mixed with 5% iron filings captures an average of 88% phosphate for at least 200 m of treated depth, which is significantly greater than a sand filter without iron filings. Neither incorporation of iron filings into a sand filter nor capture of phosphates onto iron filings in column experiments had a significant effect on the hydraulic conductivity of the filter at mixtures of 5% or less iron by weight. Field applications with up to 10.7% iron were operated over 1 year without detrimental effects upon hydraulic conductivity. A model is applied and fit to column studies to predict the field performance of iron-enhanced sand filters. The model predictions are verified through the predicted performance of the filters in removing phosphates in field applications. Practical applications of the technology, both existing and proposed, are presented so stormwater managers can begin implementation.

  11. Cleaning oil sands drilling waste in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Mikic, N.; Nilsen, C.; Markabi, M. [Mi SWACO, Calgary, AB (Canada)

    2008-07-01

    The waste generated from steam assisted gravity drainage (SAGD) wells is brought to the surface and separated by shale shakers. The waste can include drilling fluids and sand contaminated with bitumen. This paper described a new technology developed to treat waste using the addition of hot water and various mixing and separation technologies to reduce the viscosity of the bitumen and separate it from the sand. The bitumen-contaminated drill cuttings were mixed with hot water to form a slurry that was then separated through the G-force created by a hydrocyclone. A secondary separation was then conducted in an elutriation column to remove residual contaminants from the sand. The flow rate of the process was controlled by the fine solids composition of the cuttings, the temperature of the cleaning process, and the performance of the individual components. Laboratory tests conducted to tests the method showed that the sand particles produced using the method were clean enough to be safely disposed in the environment. A pilot study will be conducted to test the sand cleaning technology at a commercial scale. 6 refs., 3 figs.

  12. Mitigating in situ oil sands carbon costs

    Energy Technology Data Exchange (ETDEWEB)

    Theriault, D.J.; Peterson, J. [Laricina Energy Ltd., Calgary, AB (Canada); Heinrichs, H. [Canadian Chemical Technology Inc., Calgary, AB (Canada)

    2008-10-15

    Carbon capture and sequestration is a complex problem with a variety of dimensions that need to be considered. The political, social, and regulatory pressures are forcing carbon costs on the oil sands industry in an effort to reduce the carbon footprint of oil sands operations. This paper reviewed the political, social, and regulatory pressures and obligations for the in-situ oil sands industry. It presented the views and insights of Laricina Energy on the carbon challenge. It also described the initiatives that Laricina Energy is taking to manage these imperatives and outlined the challenges the industry is facing. The purpose of the paper was to encourage dialogue and collaboration by the oil sands industry. The paper also described the dimensions of the carbon problem and how the industry can contribute to a solution. Last, the paper reviewed the parameters of carbon dioxide or greenhouse gas containment and storage issues. It was concluded that the regulatory and policy requirements need to be clarified so that industry understands the new business landscape as well as the requirements that influence the economics of in-situ oil sands development. 7 refs., 7 figs.

  13. Clean and Secure Energy from Domestic Oil Shale and Oil Sands Resources

    Energy Technology Data Exchange (ETDEWEB)

    Spinti, Jennifer [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Birgenheier, Lauren [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Deo, Milind [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Facelli, Julio [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Hradisky, Michal [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Kelly, Kerry [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Miller, Jan [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); McLennan, John [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Ring, Terry [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Ruple, John [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Uchitel, Kirsten [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States)

    2015-09-30

    This report summarizes the significant findings from the Clean and Secure Energy from Domestic Oil Shale and Oil Sands Resources program sponsored by the Department of Energy through the National Energy Technology Laboratory. There were four principle areas of research; Environmental, legal, and policy issues related to development of oil shale and oil sands resources; Economic and environmental assessment of domestic unconventional fuels industry; Basin-scale assessment of conventional and unconventional fuel development impacts; and Liquid fuel production by in situ thermal processing of oil shale Multiple research projects were conducted in each area and the results have been communicated via sponsored conferences, conference presentations, invited talks, interviews with the media, numerous topical reports, journal publications, and a book that summarizes much of the oil shale research relating to Utah’s Uinta Basin. In addition, a repository of materials related to oil shale and oil sands has been created within the University of Utah’s Institutional Repository, including the materials generated during this research program. Below is a listing of all topical and progress reports generated by this project and submitted to the Office of Science and Technical Information (OSTI). A listing of all peer-reviewed publications generated as a result of this project is included at the end of this report; Geomechanical and Fluid Transport Properties 1 (December, 2015); Validation Results for Core-Scale Oil Shale Pyrolysis (February, 2015); and Rates and Mechanisms of Oil Shale Pyrolysis: A Chemical Structure Approach (November, 2014); Policy Issues Associated With Using Simulation to Assess Environmental Impacts (November, 2014); Policy Analysis of the Canadian Oil Sands Experience (September, 2013); V-UQ of Generation 1 Simulator with AMSO Experimental Data (August, 2013); Lands with Wilderness Characteristics, Resource Management Plan Constraints, and Land Exchanges

  14. Radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem

    Energy Technology Data Exchange (ETDEWEB)

    Wood, M.D., E-mail: mwood@liv.ac.uk [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside, L69 3GP (United Kingdom); Leah, R.T. [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside, L69 3GP (United Kingdom); Jones, S.R. [Westlakes Scientific Consulting Ltd., The Princess Royal Building, Westlakes Science and Technology Park, Moor Row, Cumbria, CA24 3LN (United Kingdom); Copplestone, D. [Environment Agency, PO Box 12, Richard Fairclough House, Knutsford Road, Latchford, Warrington, Cheshire, WA4 1HG (United Kingdom)

    2009-06-15

    International intercomparisons of models to assess the impact of ionising radiation on wildlife have identified radionuclide transfer assumptions as a significant source of uncertainty in the modelling process. There is a need to improve the underpinning data sets on radionuclide transfer to reduce this uncertainty, especially for poorly-studied ecosystems such as coastal sand dunes. This paper presents the results of the first published study of radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem. Activity concentrations of {sup 137}Cs, {sup 238}Pu, {sup 239+240}Pu and {sup 241}Am are reported for detritivorous, herbivorous, carnivorous and omnivorous biota. Differences in activity concentrations measured in the sand dune biota are related to the trophic level of the organisms and the influence of sea-to-land transfer is apparent in the food chain transfer observed at the site. There are notable differences in the concentration ratios (CRs) calculated for the sand dune biota compared to other terrestrial ecosystems, especially for the small mammals which have CRs that are two orders of magnitude lower than the generic terrestrial ecosystem CRs published by the recent EC EURATOM ERICA project. The lower CRs at the sand dunes may be due to the influence of other cations from the marine environment (e.g. K and Na) on the net radionuclide transfer observed, but further research is required to test this hypothesis.

  15. Radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem.

    Science.gov (United States)

    Wood, M D; Leah, R T; Jones, S R; Copplestone, D

    2009-06-15

    International intercomparisons of models to assess the impact of ionising radiation on wildlife have identified radionuclide transfer assumptions as a significant source of uncertainty in the modelling process. There is a need to improve the underpinning data sets on radionuclide transfer to reduce this uncertainty, especially for poorly-studied ecosystems such as coastal sand dunes. This paper presents the results of the first published study of radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem. Activity concentrations of (137)Cs, (238)Pu, (239+240)Pu and (241)Am are reported for detritivorous, herbivorous, carnivorous and omnivorous biota. Differences in activity concentrations measured in the sand dune biota are related to the trophic level of the organisms and the influence of sea-to-land transfer is apparent in the food chain transfer observed at the site. There are notable differences in the concentration ratios (CRs) calculated for the sand dune biota compared to other terrestrial ecosystems, especially for the small mammals which have CRs that are two orders of magnitude lower than the generic terrestrial ecosystem CRs published by the recent EC EURATOM ERICA project. The lower CRs at the sand dunes may be due to the influence of other cations from the marine environment (e.g. K and Na) on the net radionuclide transfer observed, but further research is required to test this hypothesis.

  16. The extraction of bitumen from western oil sands. Annual report, July 1991--July 1992

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1992-08-01

    The University of Utah tar sand research and development program is concerned with research and development on Utah is extensive oil sands deposits. The program has been intended to develop a scientific and technological base required for eventual commercial recovery of the heavy oils from oil sands and processing these oils to produce synthetic crude oil and other products such as asphalt. The overall program is based on mining the oil sand, processing the mined sand to recover the heavy oils and upgrading them to products. Multiple deposits are being investigated since it is believed that a large scale (approximately 20,000 bbl/day) plant would require the use of resources from more than one deposit. The tasks or projects in the program are organized according to the following classification: Recovery technologies which includes thermal recovery methods, water extraction methods, and solvent extraction methods; upgrading and processing technologies which covers hydrotreating, hydrocracking, and hydropyrolysis; solvent extraction; production of specialty products; and environmental aspects of the production and processing technologies. These tasks are covered in this report.

  17. Properties of Shredded Roof Membrane–Sand Mixture and Its Application as Retaining Wall Backfill under Static and Earthquake Loads

    Directory of Open Access Journals (Sweden)

    Bennett Livingston

    2017-04-01

    Full Text Available About 20 billion square feet of Ethylene Propylene Diene Monomer (EPDM rubber is installed on roofs in the United States and most of them will be reaching the end of their lifespan soon. The purpose of this study is to investigate potential reuses of this rubber in Civil Engineering projects rather than disposing it into landfills. First, laboratory tests were performed on various shredded rubber-sand mixtures to quantify the basic geotechnical engineering properties. The laboratory test results show that the shredded rubber-sand mixture is lightweight with good drainage properties and has shear strength parameters comparable to sand. This indicates that the rubber-sand mixture has potential to be used for retaining wall backfill and many other projects. To assess the economic advantage of using shredded rubber-sand mixtures as a lightweight backfill for retaining walls subjected to static and earthquake loadings, geotechnical designs of a 6 m tall gravity cantilever retaining wall were performed. The computed volume of concrete to build the structural components and volume of backfill material were compared with those of conventional sand backfill. Results show significant reductions in the volume of concrete and backfill material in both static and earthquake loading conditions when the portion of shredded rubber increased in the mixture.

  18. Permeability Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Eastern Scheldt Sand. The permeability is determined by use of a falling head apparatus. Finally the test results are briefly summarised and a relationship between...... void ratio and permeability is established....

  19. Sand Dunes Fixation in Baiji District, Iraq

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This study was carried out at Sand Dunes Stabilization Researches Station in Baiji district (230 ln north of Baghdad, Iraq) to evaluate the effects of local soil conditioners manufactured from oil derivatives and plant residuals on sand dunes fixation as the first step for sand dunes stabilization. The results indicate that the fuel oil has the first place in improving wind erosion parameters in the study area, such as increasing mean weight diameter, dry aggregates percentage, the needed time for complete disaggregation by dry sieving, and decreasing the disaggregation rates. Bitumen emulsion occupies the second place, while the plant residuals occupies the third place and has slight effects on the studied parameters. Effects of conditioners on natural vegetation cover are negative in oil derivatives treatments,while positive in plants residuals treatments.

  20. Thermoluminescent dosimetric properties of Descalvado sand

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, M.I.; Caldas, L.V.E

    2006-07-01

    Sand samples proceeding from Descalvado, Sao Paulo, were studied with regard to their dosimetric properties using the thermoluminescence technique (TL) for high doses. These sand samples present steady physical and chemical characteristics to the end items, and they are used in the glass industry and for casting. The TL curves of the samples were obtained after an irradiation at the Gamma-Cell system ({sup 60} Co), of IPEN. The glow curves present two peaks at 80 C and 220 C approximately. Calibration curves were obtained for doses between 50 Gy and 5 kGy. The results indicate that the sand samples can be used for high-doses dosimetry in several areas of applications of ionizing radiation. (Author)

  1. Development tendencies of moulding and core sands

    Directory of Open Access Journals (Sweden)

    Stanislaw M. Dobosz1

    2011-11-01

    Full Text Available Further development of the technology for making moulding and core sands will be strictly limited by tough requirements due to protection of the natural environment. These tendencies are becoming more and more tense, so that we will reach a point when even processes, that from technological point of view fulfill high requirements of the foundry industry, must be replaced by more ecologically-friendly solutions. Hence, technologies using synthetic resins as binding materials will be limited. This paper presents some predictable development tendencies of moulding and core sands. The increasing role of inorganic substances will be noticed, including silicate binders with significantly improved properties, such as improved knock-out property or higher reclamation strength. Other interesting solutions might also be moulding sands bonded by geo-polymers and phosphate binders or salts and also binders based on degradable biopolymers. These tendencies and the usefulness of these binders are put forward in this paper.

  2. Planet-wide sand motion on mars

    Science.gov (United States)

    Bridges, N.T.; Bourke, M.C.; Geissler, P.E.; Banks, M.E.; Colon, C.; Diniega, S.; Golombek, M.P.; Hansen, C.J.; Mattson, S.; McEwen, A.S.; Mellon, M.T.; Stantzos, N.; Thomson, B.J.

    2012-01-01

    Prior to Mars Reconnaissance Orbiter data, images of Mars showed no direct evidence for dune and ripple motion. This was consistent with climate models and lander measurements indicating that winds of sufficient intensity to mobilize sand were rare in the low-density atmosphere. We show that many sand ripples and dunes across Mars exhibit movement of as much as a few meters per year, demonstrating that Martian sand migrates under current conditions in diverse areas of the planet. Most motion is probably driven by wind gusts that are not resolved in global circulation models. A past climate with a thicker atmosphere is only required to move large ripples that contain coarse grains. ?? 2012 Geological Society of America.

  3. Harmfulness Assessment of Moulding Sands with a Geopolymer Binder and a New Hardener, in An Aspect of the Emission of Substances from the Btex Group

    Directory of Open Access Journals (Sweden)

    Bobrowski A.

    2015-04-01

    Full Text Available The harmfulness assessment of moulding sands with a geopolymer binder and a new hardener, in an aspect of the emission of substances from the BTEX group, was performed. Within the expedience project the new series of hardeners for the inorganic GEOPOL binder was developed. Before the introduction of the new system of moulding sands it was necessary to estimate their influence on the environment. To this aim the gasses emission from moulding sands subjected to the influence of liquid cast iron was tested with regard to the content of the gases from the BTEX group (benzene, toluene, ethylbenzene and xylenes. For the comparison the analogous investigations of the up to now applied moulding sands with the geopolymer binder, were performed. It was found that both systems of moulding sands binding emit similar amounts of gases, as well as similar amounts of substances from the BTEX group. Moulding sands with the GEOPOL binder are much more environmentally friendly than moulding sands with organic binders. The content of the BTEX group substances in gases emitted from moulding sands with the GEOPOL binder was approximately 10-times lower than in case of the moulding sands with organic binders.

  4. Undrained Cyclic Behaviour of Dense Frederikshavn Sand

    DEFF Research Database (Denmark)

    Nielsen, Søren Kjær; Ibsen, Lars Bo; Sørensen, Kris Wessel

    2013-01-01

    A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series of undra......A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series...

  5. Sand control systems used in completing wells

    Directory of Open Access Journals (Sweden)

    Gabriel Wittenberger

    2005-12-01

    Full Text Available Expandable Tubular Technology is transforming the face of well completion and construction. This technology provides: a substantially higher hydrocarbon production rates from the reservoir, a reduced well drilling and construction costs, new possibilities for previously unreachable or uneconomic reservoirs, and step a change towards the single diameter well. ESS (Expandable Sand Screen has an unrivalled performance worldwide for delivering a reliable sand control in a wide range of applications. Well costs typically cut by over 20 %, and the productivity increases up to 70 %.

  6. On the Size Distribution of Sand

    DEFF Research Database (Denmark)

    Sørensen, Michael

    2016-01-01

    -distribution, by taking into account that individual grains do not have the same travel time from the source to the deposit. The travel time is assumed to be random so that the wear on the individual grains vary randomly. The model provides an interpretation of the parameters of the NIG-distribution, and relates the mean......A model is presented of the development of the size distribution of sand while it is transported from a source to a deposit. The model provides a possible explanation of the log-hyperbolic shape that is frequently found in unimodal grain size distributions in natural sand deposits, as pointed out...

  7. George Sand [Reseña

    OpenAIRE

    Jack, Belinda; Thomas, Florence

    2002-01-01

    Belinda Jack nos cuenta en ese libro la vida de George Sand (de su verdadero nombre Aurora Dupin), esa mujer libertaria del siglo XIX, lo años de su nacimiento, su infancia, su adolescencia y su vida adulta. Una vida tan llena tanto por sus luchas interiores -Sand es una mujer que desde su adolescencia tratará de romper los fatalismos ligados a la condición de mujer del siglo XIX, un siglo profundamente familista y maternalista- como por su inmensa obra literaria que cuenta más de cincuenta n...

  8. Investigation of Sand-Cement Grouts

    Science.gov (United States)

    1960-09-01

    the sianAS. Ho-4, VVers thia 𔃽pacification ,Jlowi -inI r.ver,4 e ofl 3 :*- cen~t to be retain(v,- on1 the NO,. 1E6 sieve. 3y * :.Oviiq- (1),, sc...325 material as does the traprock or silica sand. This j J: i3 -robably the reason for the difference in the quantity of sand founud pmrnable. The three...deficient in material assing th.e ±,e h DOsieve, Ath the addition of percentages of fŕ. ash was test-ilwped. in the other to-ts in this phase, tne

  9. TURBULENT COHERENT STRUCTURES IN CHANNELS WITH SAND WAVES

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Sand wave bed is one of the typical shape of complicated boundaries in hydraulics and river dynamics, and sand wave motion is the main form of the bed load motion in-rivers, thence the study of turbulent structures over sand waves is of importance both in theory and practice. In this paper turbulent coherent structures over single-and multi-sand waves were studied experimentally, the formulae for the separation length and vortex shedding period of the turbulent flow over single-sand wave were suggested, and the characteristics of turbulent coherent structures over multi-sand waves were also given.

  10. Threshold for sand mobility on Mars calibrated from seasonal variations of sand flux

    Science.gov (United States)

    Ayoub, F.; Avouac, J.-P.; Newman, C. E.; Richardson, M. I.; Lucas, A.; Leprince, S.; Bridges, N. T.

    2014-09-01

    Coupling between surface winds and saltation is a fundamental factor governing geological activity and climate on Mars. Saltation of sand is crucial for both erosion of the surface and dust lifting into the atmosphere. Wind tunnel experiments along with measurements from surface meteorology stations and modelling of wind speeds suggest that winds should only rarely move sand on Mars. However, evidence for currently active dune migration has recently accumulated. Crucially, the frequency of sand-moving events and the implied threshold wind stresses for saltation have remained unknown. Here we present detailed measurements of Nili Patera dune field based on High Resolution Imaging Science Experiment images, demonstrating that sand motion occurs daily throughout much of the year and that the resulting sand flux is strongly seasonal. Analysis of the seasonal sand flux variation suggests an effective threshold for sand motion for application to large-scale model wind fields (1-100 km scale) of τs=0.01±0.0015 N m-2.

  11. Evaluating the oil sands reclamation process: Assessing policy capacity and stakeholder access for government and non-governmental organizations operating in Alberta's oil sands

    Science.gov (United States)

    Patterson, Tyler

    . In an effort to discern the overall status of reclamation in the oil sands this study explores several factors essential to policy capacity: work environment, training, employee attitudes, perceived capacity, policy tools, evidence based work, and networking. Data was collected through key informant interviews with senior policy professionals in government and non-government agencies in Alberta. The following are agencies of interest in this research: Canadian Association of Petroleum Producers (CAPP); Alberta Environment and Sustainable Resource Development (AESRD); Alberta Energy Regulator (AER); Cumulative Environmental Management Association (CEMA); Alberta Environment Monitoring, Evaluation, and Reporting Agency (AEMERA); Wood Buffalo Environmental Association (WBEA). The aim of this research is to explain how and why reclamation policy is conducted in Alberta's oil sands. This will illuminate government capacity, NGO capacity, and the interaction of these two agency typologies. In addition to answering research questions, another goal of this project is to show interpretive analysis of policy capacity can be used to measure and predict policy effectiveness. The oil sands of Alberta will be the focus of this project, however, future projects could focus on any government policy scenario utilizing evidence-based approaches.

  12. Danger in the nursery : impact on birds of tar sands oil development in Canada's boreal forest

    Energy Technology Data Exchange (ETDEWEB)

    Wells, J. [Boreal Songbird Initiative, Seattle, WA (United States); Casey-Lefkowitz, S.; Chavarria, G. [Natural Resources Defense Council, New York, NY (United States); Dyer, S. [Pembina Institute, Drayton Valley, AB (Canada)

    2008-07-01

    This report discussed the impacts of tar sands oil development in Canada's boreal forest. The Canadian boreal forest is one of the world's most important breeding areas for migratory birds, with 1 billion to 3 billion individual birds from at least 300 species known to regularly breed there. Approximately 30 per cent of all shorebirds and 30 per cent of all landbirds that breed in the United States and Canada do so within the boreal. The section of the boreal forest that sits over the tar sands region of Alberta is rapidly being fragmented by oil development. As much as 34 to 66 per cent of the Canadian boreal forest, up to 438 million acres, may no longer be intact. In Alberta, 86 per cent of the boreal forest is no longer considered intact, thus putting valuable bird habitat at risk. This report first provided background information on Canada's boreal forest as North America's nesting bird destination. It then reviewed the dangers created by tar sands operations for boreal birds. It noted that tar sands mining destroys boreal bird habitat; tailings ponds trap birds in oil waste; tar sands drilling fragments bird habitat; tar sands water withdrawals harm wetlands and water habitats; and tar sands toxins weaken and kill boreal birds. The impacts of tar sands pipelines and refineries were also discussed along with global warming impacts on boreal birds and the path forward for habitat protection. It was recommended that Alberta should implement a moratorium on new tar sands lease sales, and that Alberta and Canada should halt project approvals until long-term mitigation strategies and conservation measures are in place. refs., tabs., figs.

  13. MouldingSandDB – a modern database storing moulding sands properties research results

    Directory of Open Access Journals (Sweden)

    J. Jakubski

    2011-01-01

    Full Text Available The complexity of foundry processes requires the use of modern, advanced IT tools for optimization, storage and analysis of t echnicaldata. Properties of moulding and core sands that are collected in research laboratories, manufacturers, and finally in the foundries, are not in use later on. It seems important to create a database that will allow to use the results stored, along with the possibility of searching according to set criteria, adjusted to casting practice. This paper presents part of the database named „MouldingSandDB”, which allows to collect and search data for synthetic moulding sands.

  14. Real-Time Simulation of Aeolian Sand Movement and Sand Ripple Evolution: A Method Based on the Physics of Blown Sand

    Institute of Scientific and Technical Information of China (English)

    Ning Wang; Bao-Gang Hu

    2012-01-01

    Simulation and visualization of aeolian sand movement and sand ripple evolution are a challenging subject.In this paper,we propose a physically based modeling and simulating method that can be used to synthesize sandy terrain in various patterns.Our method is based on the mechanical behavior of individual sand grains,which are widely studied in the physics of blown sand.We accounted significant mechanisms of sand transportation into the sand model,such as saltation,successive saltation and collapsing,while simplified the vegetation model and wind field model to make the simulation feasible and affordable.We implemented the proposed method on the programming graphics processing unit (GPU) to get real-time simulation and rendering.Finally,we proved that our method can reflect many characteristics of sand ripple evolution through several demonstrations.We also gave several synthesized desert scenes made from the simulated height field to display its significance on application.

  15. SANDS: a service-oriented architecture for clinical decision support in a National Health Information Network.

    Science.gov (United States)

    Wright, Adam; Sittig, Dean F

    2008-12-01

    In this paper, we describe and evaluate a new distributed architecture for clinical decision support called SANDS (Service-oriented Architecture for NHIN Decision Support), which leverages current health information exchange efforts and is based on the principles of a service-oriented architecture. The architecture allows disparate clinical information systems and clinical decision support systems to be seamlessly integrated over a network according to a set of interfaces and protocols described in this paper. The architecture described is fully defined and developed, and six use cases have been developed and tested using a prototype electronic health record which links to one of the existing prototype National Health Information Networks (NHIN): drug interaction checking, syndromic surveillance, diagnostic decision support, inappropriate prescribing in older adults, information at the point of care and a simple personal health record. Some of these use cases utilize existing decision support systems, which are either commercially or freely available at present, and developed outside of the SANDS project, while other use cases are based on decision support systems developed specifically for the project. Open source code for many of these components is available, and an open source reference parser is also available for comparison and testing of other clinical information systems and clinical decision support systems that wish to implement the SANDS architecture. The SANDS architecture for decision support has several significant advantages over other architectures for clinical decision support. The most salient of these are:

  16. Simulation of aeolian sand saltation with rotational motion

    Science.gov (United States)

    Huang, Ning; Wang, Cong; Pan, Xiying

    2010-11-01

    In this work, we propose a theoretical model based on the distribution functions of initial liftoff velocity and angular velocity of sand grains to describe a sand saltation process in which both wind field-sand grain coupling and the Magnus force experienced by saltating sand grains have been incorporated. The computation results showed that the Magnus force had significant effects on sand grain saltation. In particular, when the Magnus force was incorporated, the calculated sand transport fluxes and sand transport rate per unit width were closer to the experimental value than when this force was excluded. The sand transport flux is enhanced because the Magnus force owing to particle rotation causes the particles to have higher and longer trajectories, so the particles can get more speed and energy from the wind, which leads to a larger sand transport flux. In addition, it was found that when taking the Magnus force into account, the probability density of the impact velocity and angular velocity of saltating sand grains followed an exponential distribution and a unimodal asymmetric distribution, respectively. Moreover, the sand energy flux increased with the height above the sand surface until the energy flux reached its maximum and then decreased. Furthermore, the energy flux near the ground surface decreased as the grain diameter increased, but beyond a specific height the energy flux increased with the grain diameter. Finally, for the same sand grain diameter, the energy flux increased with the friction velocity.

  17. Geophysical and Geotechnical Determination of Sand Resources on the Florida Atlantic Continental Shelf: Preliminary Results

    Science.gov (United States)

    Finkl, C. W.; Andrews, J. L.; Suthard, B. C.; Robertson, W.

    2007-12-01

    The State of Florida is committed to maintaining beaches to sustain beach width and protect coastal infrastructure. Nearshore sand resources must be identified and cataloged for potential beach nourishment projects in response to sea-level rise and increased tropical storm activity. Given the vast length of Florida coastline, application of a variety of remote sensing techniques are required for measuring large areas in a short amount of time. The study area encompasses a shelf area of about 2,053,220 ha (20,532 km2) from Miami to the Georgia State line (about 653 km shoreline length) and extends up to 27 km offshore to about the 45 m isobath offshore Jacksonville. The continental shelf along the east coast of the Florida peninsula contains a wide range of seafloor environments that lie above the Florida-Hatteras Slope on the shoreface and inner, middle, and outer shelf floors. This study used Airborne Laser Bathymetry (ALB), 3D digital terrain models based on reformatted NOAA bathymetric data, sidescan sonar, and seismic reflection profiling to map seafloor geomorphological conditions that range from coralline-algal reef systems to drowned karst, submerged paleo shorelines (drowned beach ridge plains), and buried paleo channels. Seatruthing of morphosedimentary features is achieved via jetprobe and vibracore surveys in the study of inter-reefal sand troughs, ebb-tidal deltas, transverse bars, shoals, sand waves, ridges, and banks. Preliminary results, which visualize seafloor topography as color-ramped morphoforms, indicate the presence of sedimentary deposits that may constitute viable sand resources for shore protection in the form of beach renourishment. Use of ALB and reformatted NOAA bathymetric data in the form of 3D terrain models permits classification of submarine landform topologies that was heretofore not possible using isobaths. The combination of multiple remote sensing methods showed the spatial distribution of morphosedimentary features and provided

  18. The impact of raindrops on sand

    NARCIS (Netherlands)

    de Jong, Rianne

    2017-01-01

    When a raindrop hits a sand bed, it leaves behind a small crater with a mixture of liquid and grains located at the center. This event is frequently observed in nature, but when absent, sprinklers may artificially produce these impacting drops to facilitate irrigation. Also in industry, the interact

  19. Cumulative environmental management and the oil sands

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    In response to concerns regarding the cumulative environmental impacts of oil sands development within the Athabasca oil sands deposit, the government of Alberta established a Regional Sustainable Development Strategy (RSDS) to balance development with environmental protection. The environmental issues identified through the RSDS were addressed by the Cumulative Environmental Management Association (CEMA). CEMA's boundary is the Wood Buffalo region of northeastern Alberta. It identifies existing and future environmental effects in the region and proposes recommendations to regulatory bodies for reducing environmental impacts associated with oil sands development. This presentation outlined some of the 55 stakeholder representatives of CEMA, including Alberta government departments associated with resource development, oil sand developers within the region, and Aboriginal communities and First Nations. These stakeholders provide input on sector priorities and agree on environmental thresholds. Established working groups also address technical and scientific research issues identified in the RSDS such as sustainable ecosystems; surface waters; trace metals and air contaminants; nitrogen oxides and sulphur dioxides; and land reclamation. To date, CEMA has submitted more than 50 reports and has made 4 major environmental recommendations for trace metal management, ecosystem management tools, a framework for acid deposition management, and a landscape design checklist. tabs., figs.

  20. LEARNING ABOUT THE OCEANS FROM SAND

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    As a young geophysicist in the 1980s, Rob Holman attended a conference in San Francisco that included a field trip to a beach. Dr Holman, who grew up inland, stared at the ocean, assessing the strengths of the waves. But when he looked around, everyone else was studying the sand.

  1. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a small-scal

  2. Cyclic Triaxial Loading of Cohesionless Silty Sand

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2015-01-01

    To engineer efficient structures offshore, we need to extend our knowledge of soil response. Cyclic loading and high water pressure encountered offshore greatly influence cohesionless soil performance. Silty sand from Frederikshavn wind turbine farm was tested using single diameter height samples...

  3. Galveston Island, Texas, Sand Management Strategies

    Science.gov (United States)

    2016-07-01

    68 Figure 28. Jetty segment used for computation of aeolian sand transport. Background photograph 22 May 2012...113 Figure 68 . Total shoreline change after 50 years for 500,000 yd3 placed every 2 years in different locations...The berm at Ft. Myers, FL, was constructed with dredged material from Matanzas Pass. The dredged material contained greater than 10% fines, which

  4. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

  5. Sand transport, erosion and granular electrification

    DEFF Research Database (Denmark)

    Merrison, J.P.

    2012-01-01

    The transport of granular materials by wind has a major impact on our environment through sand/soil erosion and the generation and transport of atmospheric dust aerosols. Terrestrially the transport of dust involves billions of tons of material every year, influencing the global climate and impac......The transport of granular materials by wind has a major impact on our environment through sand/soil erosion and the generation and transport of atmospheric dust aerosols. Terrestrially the transport of dust involves billions of tons of material every year, influencing the global climate...... can affect grain transport through the generation of intense electric fields and processes of electrostatic assembly. Importantly the transport of sand is characterized by saltation, which is known to be an active process for erosion and therefore a source for dust and sand formation. Using novel...... erosion simulation techniques the link between grain transport rates and erosion rates has been quantified. Furthermore this can be linked to production rates for dust and has been associated with chemical and mineral alteration through a process of mechanical activation of fractured surfaces. This work...

  6. Sand Waves along the Dutch Coast

    NARCIS (Netherlands)

    Verhagen, H.J.

    1989-01-01

    Sand waves, defined as longshore wave-like movements of the shoreline, measured in a horizontal plane, are described along several stretches of the shoreline of The Netherlands. They have a celerity in the order of 50-200 m/yr, a period of 50- 150 years and an amplitude of 30- 500 m. They are found

  7. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

  8. Sand and Stone%沙与石

    Institute of Scientific and Technical Information of China (English)

    黄川; 孙静

    2006-01-01

    @@ Astory tells that two friends were walking through the desert. During some point of the journey they had an argument, and one friend slapped the other one in the face1. The one who got slapped was hurt, but without saying anything, he wrote in the sand: "TODAY MY BEST FRIEND SLAPPED ME IN THE FACE."

  9. Dark grains of sand: a geological storytelling

    Science.gov (United States)

    Gallo Maresca, Magda

    2017-04-01

    In the secondary Italian school the Earth science learning begins at first year, in synergy with other natural science subjects such as Astronomy, Chemistry and Biology. Italian teachers have to focus on the landscape geomorphological aspects and often Earth processes are difficult to display since they are related to certain phenomena happened during the past and often far from the involved country. In order to better understand the environment surrounding us, very simple and poor materials, like sands, allow the teachers to create attractive lab experiences. According to the IBSE (Inquiry Based Science Education) approach, a learning unit has been implemented starting from a walking along the light carbonate beaches of the Adriatic sea: a smart look to the sands ("engage step"), stroke the students fantasy pushing them to explore some strange black grains on the sands. Dirty sands? Or rock landscape, soil degradation and Ofanto river and coastal processes (erosion, transportation and deposition)? This was the teaching challenge. Due to the youngest age, a third level, guided inquiry, was adopted so the teacher is the "guide of inquiry" encouraging the students using the research question ("Why is the sand dark?", "Do all sands look the same?", "Where does it come from?") and driving the students around their investigation plans ("How can I measure grain size?"). A procedure to answer the above questions and validate the results and explanations has been implemented to allow the students to be proactive in their study. During the learning activities will be the students to ask for field trip to elaborate their new knowledge, verify and visualize the speculated processes. The teaching skills allow to address several geosciences domains such as mineralogy, petrology, regional geology and geodynamics as well as other scientific disciplines such as mathematics (more specifically statistics), forensic science and even life sciences (the presence of bioclasts might

  10. Assessing environmental impacts of inland sand mining in parts of ...

    African Journals Online (AJOL)

    Assessing environmental impacts of inland sand mining in parts of Ogun State, Nigeria. ... Sand is a valuable resource for construction and other purposes, however ... Natural resources particularly, land, water quality and quantity, air quality, ...

  11. Fiber-reinforced sand strength and dilation characteristics

    Directory of Open Access Journals (Sweden)

    Hesham M. Eldesouky

    2016-06-01

    Full Text Available Randomly distributed fiber reinforcement is used to provide an isotropic increase in the sand shear strength. The previous studies were not consistent regarding the fibers effect on the volumetric change behavior of fiber-reinforced sand. In this paper, direct shear tests are conducted on 108 specimens to investigate the effects of the fibers content, relative density, normal stress and moisture content on the shear strength and volumetric change behaviors of fiber-reinforced sand. The study investigates also the possibility of using dry fiber-reinforced sand as an alternative to heavily compacted unreinforced moist sand. The results indicate that the fibers inclusion increases the shear strength and dilation of sand. Moisture suppresses the fibers effect on the peak and post-peak shear strengths, and dilation. Dry loose fiber-reinforced sand achieves the same shear strength of heavily compacted unreinforced moist sand, yet at more than double the horizontal displacement.

  12. Gating Technology for Vertically Parted Green Sand Moulds

    DEFF Research Database (Denmark)

    Larsen, Per

    Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems.......Gating technology for vertically parted green sand moulds. Literature study of different ways of designing gating systems....

  13. Expandable sand screens: from novel concept to proven sand control technique

    Energy Technology Data Exchange (ETDEWEB)

    Metcalfe, Paul; Jones, Colin; Ballard, Tracey; Beare, Steve; Hillis, Dave [Weatherford International Inc., Houston, TX (United States)

    2004-07-01

    Expandable Sand Screens (ESS) have proved a viable alternative to gravel packing for sand control. With over 300 installations worldwide, analysis of their use has confirmed that ESS offers excellent production performance and sand control reliability in Open hole. This paper presents details of a global survey on ESS performance that gives accurate information on production performance, sand exclusion reliability and cost effectiveness in Open hole and cased hole application scenarios. This paper also discusses the role and effect of compliant expansion in observed productivity performance and skin values. The rock mechanical, reservoir characterization and metallurgical requirements of ESS systems are also investigated. Finally, the latest advances of the technology for use within the reservoir are explained. This paper demonstrates how the combination of ESS and Expandable Zonal Isolation devices can offer cased hole functionality (in terms of zonal isolation) in combination with Open hole levels of production performance (from the ESS). (author)

  14. Water management in the oil sands industry

    Energy Technology Data Exchange (ETDEWEB)

    Pauls, R. [Syncrude Canada Ltd., Fort McMurray, AB (Canada)

    2004-07-01

    Water management issues at Alberta's 4 oil sand deposits were discussed. The 4 deposits include the Peace River, Athabasca, Wabasca and Cold Lake deposits, with the Athabasca deposit being the largest and the only surface-mineable deposit. Large quantities of water are needed to extract bitumen from oil sands. This paper addressed water volume withdrawal from the Athabasca River, the primary source of water for the surface-mining oil sands industry. It also addressed Muskeg River watershed integrity, quality of water withdrawn from reclaimed landscapes, groundwater contamination, and ecological viability of end-pit lakes. Currently, half of Syncrude's oil sand is transported from mine to extraction plant by conveyor belts. The other half is pipelined as a warm water slurry. By 2005, all transport will be by pipeline. The oil sand is mixed with hot water, steam and surfactants to condition it for extraction. Seventy-nine per cent of the water used by Syncrude is recycled water and the remainder comes from the Athabasca River. Syncrude diverts 2.5 to 3 barrels of water from the Athabasca River for every barrel of oil produced. This paper discussed the in-stream flow needs of the Athabasca River based on protection of aquatic ecosystems. Flow needs are addressed by the Cumulative Effects Management Association (CEMA). The paper states that the proportion of annual flow withdrawn from the Athabasca River is too low to have a significant impact on aquatic systems, but the main concern lies in water use during low flow periods, typically during the winter months. Developers will likely come under pressure to develop off-site reservoirs to store water for use during these low-flow periods. tabs., figs.

  15. Imaging of Acoustic Waves in Sand

    Energy Technology Data Exchange (ETDEWEB)

    Deason, Vance Albert; Telschow, Kenneth Louis; Watson, Scott Marshall

    2003-08-01

    There is considerable interest in detecting objects such as landmines shallowly buried in loose earth or sand. Various techniques involving microwave, acoustic, thermal and magnetic sensors have been used to detect such objects. Acoustic and microwave sensors have shown promise, especially if used together. In most cases, the sensor package is scanned over an area to eventually build up an image or map of anomalies. We are proposing an alternate, acoustic method that directly provides an image of acoustic waves in sand or soil, and their interaction with buried objects. The INEEL Laser Ultrasonic Camera utilizes dynamic holography within photorefractive recording materials. This permits one to image and demodulate acoustic waves on surfaces in real time, without scanning. A video image is produced where intensity is directly and linearly proportional to surface motion. Both specular and diffusely reflecting surfaces can be accomodated and surface motion as small as 0.1 nm can be quantitatively detected. This system was used to directly image acoustic surface waves in sand as well as in solid objects. Waves as frequencies of 16 kHz were generated using modified acoustic speakers. These waves were directed through sand toward partially buried objects. The sand container was not on a vibration isolation table, but sat on the lab floor. Interaction of wavefronts with buried objects showed reflection, diffraction and interference effects that could provide clues to location and characteristics of buried objects. Although results are preliminary, success in this effort suggests that this method could be applied to detection of buried landmines or other near-surface items such as pipes and tanks.

  16. Incipient Motion of Sand and Oil Agglomerates

    Science.gov (United States)

    Nelson, T. R.; Dalyander, S.; Jenkins, R. L., III; Penko, A.; Long, J.; Frank, D. P.; Braithwaite, E. F., III; Calantoni, J.

    2016-12-01

    Weathered oil mixed with sediment in the surf zone in the northern Gulf of Mexico after the 2010 Deepwater Horizon oil spill, forming large mats of sand and oil. Wave action fragmented the mats into sand and oil agglomerates (SOAs) with diameters of about 1 to 10 cm. These SOAs were transported by waves and currents along the Gulf Coast, and have been observed on beaches for years following the spill. SOAs are composed of 70%-95% sand by mass, with an approximate density of 2107 kg/m³. To measure the incipient motion of SOAs, experiments using artificial SOAs were conducted in the Small-Oscillatory Flow Tunnel at the U.S. Naval Research Laboratory under a range of hydrodynamic forcing. Spherical and ellipsoidal SOAs ranging in size from 0.5 to 10 cm were deployed on a fixed flat bed, a fixed rippled bed, and a movable sand bed. In the case of the movable sand bed, SOAs were placed both proud and partially buried. Motion was tracked with high-definition video and with inertial measurement units embedded in some of the SOAs. Shear stress and horizontal pressure gradients, estimated from velocity measurements made with a Nortek Vectrino Profiler, were compared with observed mobility to assess formulations for incipient motion. For SOAs smaller than 1 cm in diameter, incipient motion of spherical and ellipsoidal SOAs was consistent with predicted critical stress values. The measured shear stress at incipient motion of larger, spherical SOAs was lower than predicted, indicating an increased dependence on the horizontal pressure gradient. In contrast, the measured shear stress required to move ellipsoidal SOAs was higher than predicted, even compared to values modified for larger particles in mixed-grain riverine environments. The laboratory observations will be used to improve the prediction of incipient motion, transport, and seafloor interaction of SOAs.

  17. Optical and radiocarbon ages of stacked paleosols and dune sands in the Nebraska Sand Hills, USA

    Science.gov (United States)

    Goble, R. J.; Mason, Joseph A.; Loope, David B.; Swinehart, James B.

    2004-05-01

    Optical ages for eolian sands from the Nebraska Sand Hills indicate periods of extensive eolian activity at ca 115±25, 840±70, 2300±240, and 3560±340 a. Activity was also noted at single sampling locations at ca 6180±370, 8430±510 and 13110±800 a. Many of these ages are similar to those noted by earlier authors. Optical ages from samples collected within paleosols indicate shorter and possibly less extensive periods of eolian activity at approximately 1220±150, 1590±110, and possibly 1950±150 a, during which the paleosol sands accumulated. What was originally interpreted as a single 1.2 m thick paleosol is shown by optical dating to consist of three or more welded soils developed within eolian sands with optical ages of ca 3800±240, 2740±240, 1560±110, and possibly 1930±140 a, each of which match eolian pulses recognized elsewhere. Scatter in some optical ages is attributable to intersection of sand-filled rodent burrows extending in outcrop 1.5 m below the contact between paleosol and overlying topset beds. A 5310±360 a optical age for one probable intersected burrow provides evidence for upward or lateral transport of older sands.

  18. Evaluate of head loss, sediment value and copper removal in sand media (rapid sand filter

    Directory of Open Access Journals (Sweden)

    Daneshi Navab

    2014-06-01

    Full Text Available Along with the technology development and increasing consumption of water resources, we are experiencing low qualities in the mentioned resources. Copper brings about serious environment al pollution, threatening human health and ecosystem. This metal found variously in water resources and industrial activities. Therefore, it needs to treat the water resources from these excessive amounts. Different methods have used for this reason but the most used method during recent years has been the absorption by economic absorbers such as sand. Rapid sand filters usually used in water and wastewater treatment plants for water clarification. In this research, a single layer gravity rapid sand filter has used to reduce different concentrations of copper. sediment value and head loss arising in filter media is simulated by using combination of Carman-Kozeny, Rose and Gregory models in different discharges of rapid sand filter. Results have shown that with increasing in discharge and decreasing in input copper concentration, arriving time to given head loss, is increasing. In addition, results demonstrated that with increasing in copper concentration in influent, removal efficiency is decreasing somewhat. Results of this research can applied in an appropriate design of rapid sand filter to copper removal, a prediction of rapid sand filter ability to copper removal and an estimation of arising head loss during filter work thus evaluating of time interval backwash. DOI: http://dx.doi.org/10.3126/ije.v3i2.10641 International Journal of the Environment Vol.3(2 2014: 276-286

  19. Yield of a Choctawhatchee Sand Pine Plantation at Age 28

    Science.gov (United States)

    Russell M. Burns; R.H. Brendemuehl

    1969-01-01

    A little-known tree, Choctawhatchee sand pine (Pinus clausa [Chapm.] Vasey), seems well adapted to the infertile, droughty soils common to the sandhills of Florida which now produce little value. Published yield data based on plantation-grown Choctawhatchee sand pine are not available. One 28-year-old plantation of this race of sand pine, growing...

  20. 77 FR 75007 - Importation of Sand Pears From China

    Science.gov (United States)

    2012-12-19

    ... Health Inspection Service 7 CFR Part 319 RIN 0579-AD42 Importation of Sand Pears From China AGENCY... and vegetables regulations to allow the importation of sand pears (Pyrus pyrifolia) from China into the United States. As a condition of entry, sand pears from areas in China in which the Oriental...

  1. Design and management of conventional fluidized-sand biofilters

    Science.gov (United States)

    Fluidized sand biofilters (FSBs) are relatively compact, efficient, and cost-competitive biofilters, especially in recirculating systems that require maintaining consistently low levels of ammonia and nitrite. Filter sand is low cost (often $70-200/m3 of sand delivered) and has a high specific surf...

  2. Mineral processing of heavy mineral sands from Malawi and Malaysia

    OpenAIRE

    Mitchell, C J

    1992-01-01

    Processing of heavy mineral sands involves many techniques including gravity, magnetic and electrostatic separation. As part of a laboratory programme to develop effective mineral processing techniques, two mineral sands from Malawi and Malaysia were processed using the standard techniques, with emphasis placed on the Carpco electrostatic separator. These sands were initially characterised mineralogically by scanning electron microscopy (SEM), electron microprobe analysis (EPMA...

  3. Investigating salt and naphthenic acids interactions in the toxicity of oil sands process water to freshwater invertebrates

    Energy Technology Data Exchange (ETDEWEB)

    Turcotte, D.; Kautzman, M.; Wojnarowicz, P.; Cutter, J.; Bird, E.; Liber, K. [Saskatchewan Univ., Regina, SK (Canada)

    2010-07-01

    The hot water extraction process used to produce bitumens from oil sands produces a large volume of oil sands process water (OSPW) that contain elevated concentrations of naphthenic acids (NA) and salts. Many oil sands reclamation projects are proposing the use of OSPW as part of reconstructed wetlands projects. This study investigated the toxicity of OSPW to freshwater invertebrates. The toxic interactions between NA and salinity on freshwater invertebrates were assessed. Bioassays with laboratory-cultured Ceriodaphnia dubia were conducted to determine the toxicity of OSPW from selected water bodies. The study showed that while the concentrations of NAs and salinity were elevated in OSPW waters that caused toxic responses, the concentrations of salinity ions varied greatly among the OSPW samples. Results of the study suggested that ion composition may be a factor in toxicity. Interactions between NAs and salinity were then assessed by performing bioassays with mixtures representing major ion combinations in OSPW.

  4. Micromechanical Modeling for the Deformation of Sand with Non-coaxiality Between Stress and Material Axes

    Science.gov (United States)

    Bennett, K. C.; Chang, C. S.; Borja, R. I.

    2011-12-01

    This research project has taken the micromechanics approach to model the strength and deformation behavior of inherently anisotropic sand subjected to stresses non-coaxial with the material axes. Asymmetric sand grains, such as elongated sand grains, are likely to develop a preferred orientation when deposited during the process of alluvial sedimentation, creating an inherently anisotropic material fabric with horizontally oriented bedding planes. Sand thus exhibits different strength and stress-strain behavior dependent on the direction of loading with respect to the axes of the soil. Accounting for non-coaxiality between the stress and material axes is paramount for the accurate prediction of soil's response to applied loads; however, despite the numerous advancements in constitutive models and numerical methods for geotechnical analysis, the problem of accounting for the effect of non-coaxiality between stress and material axes on soil behavior has not been satisfactorily addressed. Drained hollow cylinder torsional shear (HCTS) compression tests on Toyoura sand were simulated, where the direction of the major principal stresses were applied at various angles to the material axes ranging from 0° to 90° from vertical (i.e., ranging from normal to parallel with the bedding plane). Anisotropic behavior has been attributed to interlocking of the sand particles, where the interlocking is least and sliding occurs most easily on the bedding plane. The degree of interlocking was taken as a material property which varies in three dimensions with respect to the material axes, and has been shown to account for observed anisotropy of material strength. Anisotropy of elastic and plastic strain was accounted for, as was the volumetric strain behavior. The developed micromechanics model has been shown to be capable of predicting anisotropy of strength and stress-strain behavior resulting from non-coaxiality of the stress and material axes.

  5. CAVITY LIKE COMPLETIONS IN WEAK SANDS PREFERRED UPSTREAM MANAGEMENT PRACTICES

    Energy Technology Data Exchange (ETDEWEB)

    Ian Palmer; John McLennan

    2004-04-30

    The technology referred to as Cavity Like Completions (CLC) offers a new technique to complete wells in friable and unconsolidated sands. A successfully designed CLC provides significant increases in well PI (performance index) at lower costs than alternative completion techniques. CLC technology is being developed and documented by a partnership of major oil and gas companies through a GPRI (Global Petroleum Research Institute) joint venture. Through the DOE-funded PUMP program, the experiences of the members of the joint venture will be described for other oil and gas producing companies. To date six examples of CLC completions have been investigated by the JV. The project was performed to introduce a new type of completion (or recompletion) technique to the industry that, in many cases, offers a more cost effective method to produce oil and gas from friable reservoirs. The project's scope of work included: (1) Further develop theory, laboratory and field data into a unified model to predict performance of cavity completion; (2) Perform at least one well test for cavity completion (well provided by one of the sponsor companies); (3) Provide summary of geo-mechanical models for PI increase; and (4) Develop guidelines to evaluate success of potential cavity completion. The project tracks the experiences of a joint industry consortium (GPRI No. 17) over a three year period and compiles results of the activities of this group.

  6. The Rheology of Acoustically Fluidized Sand

    Science.gov (United States)

    Conrad, J. W.; Melosh, J.

    2013-12-01

    The collapse of large craters and the formation of central peaks and peak rings is well modeled by numerical computer codes that incorporate the acoustic fluidization mechanism to temporarily allow the fluid-like flow of rock debris immediately after crater excavation. Furthermore, long runout landslides require a similar mechanism to explain their almost frictionless movement, which is probably also a consequence of their granular composition coupled with internal vibrations. Many different investigators have now confirmed the ability of vibrations to fluidize granular materials. Yet it still remains to fully describe the rheology of vibrated sand as a function of stress, frequency and amplitude of the vibrations in the sand itself. We constructed a rotational viscometer to quantitatively investigate the relation between the stress and strain rate in a horizontal bed of strongly vibrated sand. In addition to the macroscopic stain rate, the amplitude and frequency of the vibrations produced by a pair of pneumatic vibrators were also measured with the aid of miniaturized piezoelectric accelerometers (B&K 4393) whose output was recorded on a digital storage oscilloscope. The initial gathering of the experimental data was difficult due to granular memory, but by having the sand compacted vibrationally for 8 minutes before each run the scatter of data was reduced and we were able to obtain consistent results. Nevertheless, our major source of uncertainty was variations in strain rate from run to run. We find that vibrated sand flows like a highly non-Newtonian fluid, in which the shear strain rate is proportional to stress to a power much greater than one, where the precise power depends on the amplitude and frequency of the applied vibrations. Rapid flow occurs at stresses less than half of the static yield stress (that is, the yield stress when no vibration is applied) when strong vibrations are present. For a Newtonian fluid, such as water, the relation between

  7. Locomotory transition from water to sand and its effects on undulatory kinematics in sand lances (Ammodytidae).

    Science.gov (United States)

    Gidmark, Nicholas J; Strother, James A; Horton, Jaquan M; Summers, Adam P; Brainerd, Elizabeth L

    2011-02-15

    Sand lances, fishes in the genus Ammodytes, exhibit a peculiar burrowing behavior in which they appear to swim rapidly into the substrate. They use posteriorly propagated undulations of the body to move in both water, a Newtonian fluid, and in sand, a non-Newtonian, granular substrate. In typical aquatic limbless locomotion, undulations of the body push against water, which flows because it is incapable of supporting the static stresses exerted by the animal, thus the undulations move in world space (slipping wave locomotion). In typical terrestrial limbless locomotion, these undulations push against substrate irregularities and move relatively little in world space (non-slipping wave locomotion). We used standard and X-ray video to determine the roles of slipping wave and non-slipping wave locomotion during burrowing in sand lances. We find that sand lances in water use slipping wave locomotion, similar to most aquatic undulators, but switch to non-slipping waves once they burrow. We identify a progression of three stages in the burrowing process: first, aquatic undulations similar to typical anguilliform locomotion (but without head yaw) push the head into the sand; second, more pronounced undulations of the aquatic portion of the body push most of the animal below ground; third, the remaining above-ground portion of the body ceases undulation and the subterranean portion takes over, transitioning to non-slipping wave locomotion. We find no evidence that sand lances use their body motions to fluidize the sand. Instead, as soon as enough of the body is underground, they undergo a kinematic shift and locomote like terrestrial limbless vertebrates.

  8. Longshore sediment transport at Golden Sands (Bulgaria

    Directory of Open Access Journals (Sweden)

    Hristo Nikolov

    2006-09-01

    Full Text Available The paper presents the results of studies on the qualitative and quantitative features of the littoral drift at Golden Sands (Bulgaria, carried out jointly by Polish and Bulgarian researchers. The mathematical modelling of physical coastal processes took wave transformation (wave diffraction and refraction; the effects of shoaling and wave breaking and longshore sediment transport into account. The computations were carried out for the mean statistical annual wave climate, determined on the basis of IO BAS wave data, simulated using the WAM method from long-term Black Sea wind data. The results of sediment transport computations clearly show that its direction off the Golden Sands shore is from north to south.

  9. Post-liquefaction reconsolidation of sand.

    Science.gov (United States)

    Adamidis, O; Madabhushi, G S P

    2016-02-01

    Loosely packed sand that is saturated with water can liquefy during an earthquake, potentially causing significant damage. Once the shaking is over, the excess pore water pressures that developed during the earthquake gradually dissipate, while the surface of the soil settles, in a process called post-liquefaction reconsolidation. When examining reconsolidation, the soil is typically divided in liquefied and solidified parts, which are modelled separately. The aim of this paper is to show that this fragmentation is not necessary. By assuming that the hydraulic conductivity and the one-dimensional stiffness of liquefied sand have real, positive values, the equation of consolidation can be numerically solved throughout a reconsolidating layer. Predictions made in this manner show good agreement with geotechnical centrifuge experiments. It is shown that the variation of one-dimensional stiffness with effective stress and void ratio is the most crucial parameter in accurately capturing reconsolidation.

  10. Three dimensional fabric evolution of sheared sand

    Energy Technology Data Exchange (ETDEWEB)

    Hasan, Alsidqi; Alshibli, Khalid (UWA)

    2012-10-24

    Granular particles undergo translation and rolling when they are sheared. This paper presents a three-dimensional (3D) experimental assessment of fabric evolution of sheared sand at the particle level. F-75 Ottawa sand specimen was tested under an axisymmetric triaxial loading condition. It measured 9.5 mm in diameter and 20 mm in height. The quantitative evaluation was conducted by analyzing 3D high-resolution x-ray synchrotron micro-tomography images of the specimen at eight axial strain levels. The analyses included visualization of particle translation and rotation, and quantification of fabric orientation as shearing continued. Representative individual particles were successfully tracked and visualized to assess the mode of interaction between them. This paper discusses fabric evolution and compares the evolution of particles within and outside the shear band as shearing continues. Changes in particle orientation distributions are presented using fabric histograms and fabric tensor.

  11. Rational approach to anisotropy of sand

    Science.gov (United States)

    Wu, Wei

    1998-11-01

    The paper presents a constitutive model for the three-dimensional deformation-strength behaviour of inherently anisotropic sand. Based on non-linear tensorial functions, the model is developed without recourse to the concepts in plasticity theory such as yield surface and plastic potential. Benefited from the fact that no decomposition of strain into elastic and plastic parts is assumed, a unified treatment of anisotropic behaviour of deformation and strength is achieved. Anisotropy is characterized by a vector normal to the bedding plane. The extension of the constitutive model is furnished by incorporating the vector under consideration of the principle of objectivity and the condition of material symmetry. Distinct features of the model are its elegant formulation and its simple structure involving few material parameters. Model performance and comparison with experiments show that the model is capable of capturing the salient behaviour of anisotropic sand.

  12. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    Global applications of pesticides in agricultural production have led to the detection of trace amounts of pesticides in groundwater resources in levels exceeding the EU threshold limit for drinking water of 0.1 µg L-1. Pesticide-polluted groundwater may be remediated by inoculating waterworks sand...... filters with specific degrading bacteria. However, degradation efficiency is often hampered by poor adhesion and a lack of sustained catabolic activity of the introduced bacteria. The overall objective of this thesis was to investigate the significance of selected bacterial surface properties...... coincided with efficient mineralisation/degradation, and proposed the tfdC gene as a suitable marker for monitoring phenoxy acid degradation in strain PM2. Furthermore, when testing strain PM2s degradation performance in flow-through sand columns, we found that strain PM2 was able to sustain induced...

  13. Analysis of Wind-blown Sand Movement over Transverse Dunes

    Science.gov (United States)

    Jiang, Hong; Huang, Ning; Zhu, Yuanjian

    2014-12-01

    Wind-blown sand movement often occurs in a very complicated desert environment where sand dunes and ripples are the basic forms. However, most current studies on the theoretic and numerical models of wind-blown sand movement only consider ideal conditions such as steady wind velocity, flat sand surface, etc. In fact, the windward slope gradient plays a great role in the lift-off and sand particle saltation. In this paper, we propose a numerical model for the coupling effect between wind flow and saltating sand particles to simulate wind-blown sand movement over the slope surface and use the SIMPLE algorithm to calculate wind flow and simulate sands transport by tracking sand particle trajectories. We furthermore compare the result of numerical simulation with wind tunnel experiments. These results prove that sand particles have obvious effect on wind flow, especially that over the leeward slope. This study is a preliminary study on windblown sand movement in a complex terrain, and is of significance in the control of dust storms and land desertification.

  14. Drift sands, lakes, and soils: the multiphase Holocene history of the Laarder Wasmeren area near Hilversum, the Netherlands.

    NARCIS (Netherlands)

    Sevink, J.; Koster, E.A.; Geel, van B.; Wallinga, J.

    2013-01-01

    A unique complex of multiphased Holocene drift sands and paleosols, with at least two lacustrine phases, was discovered during a major sanitation project in the Laarder Wasmeren area near Hilversum, the Netherlands. The complex could be studied in detail, highly facilitated by the excellent and larg

  15. Drift sands, lakes and soils: the multiphase Holocene history of the Laarder Wasmeren area near Hilversum, The Netherlands

    NARCIS (Netherlands)

    Sevink, J.; Koster, E.A.; van Geel, B.; Wallinga, J.

    2013-01-01

    A unique complex of multiphased Holocene drift sands and paleosols, with at least two lacustrine phases, was discovered during a major sanitation project in the Laarder Wasmeren area near Hilversum, the Netherlands. The complex could be studied in detail, highly facilitated by the excellent and larg

  16. Field Measurements of Influence of Sand Transport Rate on Structure of Wind-sand Flow over Coastal Transverse Ridge

    Institute of Scientific and Technical Information of China (English)

    DONG Yuxiang; S L NAMIKAS; P A HESP; MA Jun

    2008-01-01

    The structure of wind-sand flow under different total sand transport rates was measured with field vertical anemometer and sand trap on the crest of typical coastal transverse ridge in Changli Gold Coast of Hebei Province,which is one of the most typical coastal aeolian distribution regions in China and famous for the tall and typical coastal transverse ridges.The measurement results show that,on the conditions of approximate wind velocities and same surface materials and environments,some changes happen to the structure of wind-sand flow with the increase of total sand transport rate on the crest of coastal transverse ridge.First,the sand transport rates of layers at different heights in the wind-sand flow increase,with the maximum increase at the height layer of 4-8cm.Second,the ratios of sand transport rates of layers at different heights to total sand transport rate decrease at the low height layer (0-4cm),but increase at the high height layer (4-60cm).Third,the distribution of the sand transport rate in the wind-sand flow can be expressed by an exponential function at the height layer of 0-40cm,but it changes fi'om power function model to exponential function model in the whole height layer (0-60cm) and changes into polynomial function model at the height layer of 40-60cm with the increase of total sand transport rate.Those changes have a close relationship with the limit of sand grain size of wind flow transporting and composition of sand grain size in the wind-sand flow.

  17. Study of the anti-sand sucker rod pump

    Science.gov (United States)

    Wei, Hangxin; Lv, Bingxin; Xi, Wenkui; Yi, Peng

    2017-06-01

    In order to solve the problem of sand stuck in the sucker rod pump, an anti-sand sucker rod pump is designed. The anti-sand sucker rod pump includes the conventional sucker rod pump and the swirl flow device. The sand particles can be separated from the oil in the swirl flow device, so the plunger of the sucker rod pump cannot be stuck. The motion equation of the sand particles in oil is deduced. The virtual model of the swirl flow device is built in GAMBIT software. And simulation of solid-liquid two phase flow is simulated in software FLUENT. The simulation results show that the swirl flow device can realize the sand particles separation from the oil completely. So the pump can have the effect of anti-sands.

  18. Strength and sintering effects at ejection of explosively driven sand

    Science.gov (United States)

    Resnyansky, A. D.; Weckert, S. A.

    2014-05-01

    A description of the response of sand to extreme loads is very important for the evaluation of the sand ejecta impact effects on various targets. Sand is a complex material to simulate because of its porosity where the inter-phase equilibrium is hard to achieve under transient shock wave loading. A previously developed two-phase model with strength has been implemented in CTH and applied to sand. The shock response of the sand, including the Hugoniot abnormality known from the literature for highly porous silica, is adequately described with the material model. The sand unloading effects appearing as the ejecta are observed in the present work using dynamic flash X-ray of an aluminium target plate loaded by limestone sand ejecta from the detonation of a buried high explosive charge. The CTH modelling results compared with the flash X-ray images have demonstrated good agreement, particularly, in the description of momentum transfer to the target.

  19. A transport-rate model of wind-blown sand

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Sand transport by wind plays an important role in environmental problems.Formulating the sand-transport rate model has been of continuing significance,because the majority of the existing models relate sand-transport rate to the wind-shear velocity.However,the wind-shear velocity readapted to blown sand is difficult to determine from the measured wind profiles when sand movement occurs,especially at high wind velocity.Detailed wind tunnel tests were carried out to reformulate the sand-transport rate model,followed by attempts to relate sand-transport rate to parameters of wind velocity,threshold shear-velocity,and grain size.Finally,we validated the model based on the data from field observations.

  20. Pullout capacity of batter pile in sand.

    Science.gov (United States)

    Nazir, Ashraf; Nasr, Ahmed

    2013-03-01

    Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21-31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18-75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted.

  1. Kirsten Sand. Arkitekt for sin tid

    Directory of Open Access Journals (Sweden)

    Elisabeth Seip

    2015-12-01

    Full Text Available Towards the end of World War II the retreating Germans burnt down nearly all buildings and other constructions in the counties of Finnmark and the northern parts of Troms in North Norway. The population evacuated but many returned as soon as possible, only to find themselves homeless. At this very demanding point Kirsten Sand decided to travel north, and do whatever she could as an architect to help. The pre-war housing situation was generally difficult. Low building standards and lack of money forced families in the cities to live under bad conditions. Kirsten Sand studied these conditions and took part in the efforts to better the situation. This knowledge provided a good starting point for the work she undertook after the war, in particular her profound understanding of the situation of women, their working conditions and positions in the household and society. Houses designed by Sand and her helpmates are simple but adequate, taking into account these women’s point of view. Ingebjørg Hage has thrown light on the work of Kirsten Sand in Finnmark and Troms in several ways. This article aims at describing Sand’s background as an architect before she left Oslo to travel north. It describes how housing and housing policy since long had been central to architects, especially so within the group she belonged to. In pre-war Oslo she had been engaged in planning and designing hospitals. During a period as inspector for the health authorities she learned a lot about the living conditions of people in general. After establishing her own architect’s office she mostly designed family houses, and during the war she engaged in research that further deepened her knowledge in the field. Thus she was particularly well equipped for the demanding tasks she undertook in the summer of 1945.

  2. Pullout capacity of batter pile in sand

    Directory of Open Access Journals (Sweden)

    Ashraf Nazir

    2013-03-01

    Full Text Available Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21–31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18–75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted.

  3. Guide to preparing SAND reports. Revised

    Energy Technology Data Exchange (ETDEWEB)

    Locke, T.K. [ed.

    1996-04-01

    This guide contains basic information needed to produce a SAND report. Its guidelines reflect DOE regulation and Sandia policy. The guide includes basic writing instructions in an annotated sample report; guidance for organization, format, and layout of reports produced by line organizations; and information about conference papers, journal articles, and brochures. The appendixes contain sections on Sandia`s preferred usage, equations, references, copyrights and permissions, and publishing terms.

  4. Sorption of Arsenite onto Mackinawite Coated Sand

    Science.gov (United States)

    Gallegos, T. J.; Hayes, K. F.; Abriola, L. M.

    2004-05-01

    Arsenic contamination of groundwater is a widespread problem affecting aquifers in the United States as well as abroad. Recent strengthening of the US EPA MCL for arsenic has prompted the need for technology capable of removing both arsenite and arsenate from solution. Arsenite, the more toxic form of arsenic, is more difficult to remove from anoxic zones in the subsurface. Studies by others have demonstrated the affinity of some types of iron sulfides for arsenite, such as troilite, pyrite, amorphous iron sulfide and mackinawite. However, these studies have not provided a comprehensive investigation of the macroscopic behavior of arsenite in the presence of crystalline mackinawite in a form that can be readily applied to real-world treatment technologies. This study examines the behavior of arsenite in the presence of mackinawite coated sand. PH edge results demonstrate that arsenite sorption onto mackinawite coated sand increases with increasing pH, reaching maximum removal at pH 10. Arsenite removal, albeit slight, occurring below pH 5 is independent of pH indicative of a different removal mechanism. Isotherm studies show that at low concentrations, removal is Langmuirian in nature. Arsenite sorption abruptly converts to linear behavior at high concentrations, possibly attributed to the saturation of the monolayer. Ionic strength effects were assessed by comparing pH edge data developed for three different concentrations of NaCl background electrolyte solution. Increases in ionic strength enhance the removal of arsenite from solution, suggesting possible inner-sphere surface complexation removal mechanisms. Information gathered in this study can be used to further develop surface complexation models to describe and predict reactivity of arsenite in the presence of mackinawite coated sands in anoxic regions. Mackinawite coated sands investigated here may provide a feasible reactive medium for implementation in above-ground sorption reactors or subsurface

  5. PHYSICAL MODELING OF ODOMETRIC COMPRESSION OF SAND

    Directory of Open Access Journals (Sweden)

    Lyashenko P. A.

    2016-10-01

    Full Text Available The odometric compression of sand with constant rate of loading (CRL or constant rate of deformation (CRD and continuous registration of the corresponding reaction allows to identify the effect of stepwise changes of deformation (at the CRL and the power reaction (at the CRD. Physical modeling of compression on the sandy model showed the same effect. The physical model was made of fine sand with marks, mimicking large inclusions. Compression of the soil at the CRD was uneven, stepwise, and the strain rate of the upper boundary of the sandy model changed cyclically. Maximum amplitudes of cycles passed through a maximum. Inside of the sand model, the uneven strain resulted in the mutual displacement of the adjacent parts located at the same depth. The growth of external pressure, the marks showed an increase or decrease in displacement and even move opposite to the direction of movement (settlement the upper boundary of the model ‒ "floating" of marks. Marks, at different depths, got at the same time different movements, including mutually contradictory. The mark settlements sudden growth when the sufficiently large pressure. These increments in settlements remained until the end of loading decreasing with depth. They were a confirmation of the hypothesis about the total destruction of the soil sample at a pressure of "structural strength". The hypothesis of the "floating" reason based on the obvious assumption that the marks are moved together with the surrounding sand. The explanation of the effect of "floating" is supported by the fact that the value of "floating" the more, the greater the depth

  6. Sand Ripple Dynamics on the Inner Shelf

    Science.gov (United States)

    2006-01-01

    Sand Ripple Dynamics on the Inner Shelf Donald N. Slinn Department of Civil and Coastal Engineering, University of Florida Gainesville, FL 32611...Florida,Department of Civil and Coastal Engineering,Gainesville,FL,32611-6590 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY...2002. 452: p. 1-24. Acrivos, A., Shear-Induced Particle Diffusion in Concentrated Suspensions of Noncolloidal Particles. Journal of Rheology , 1995

  7. Drawing a Line in the Sand

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    An Inner Mongolian woman takes on the desert and converts extensive arid regions into arable land by Ni Yanshuo CONVERTING vast tracks of desert into arable land is no easy task, even using the most advanced technology.Yet a woman who hails from north China’s Inner Mongolia Autonomous Region met this challenge head on.Using the helping hands of other determined women,she has made remarkable progress in pushing back the sands of time.

  8. Drained Triaxial Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Praastrup, U.; Jakobsen, Kim Parsberg

    In the process of understanding and developing models for geomaterials, the stress-strain behaviour is commonly studied by performing triaxial tests. In the present study static triaxial tests have been performed to gain knowledge of the stress-strain behaviour of frictional materials during...... monotonic loading. The tests reported herein are all drained tests, starting from different initial states of stress and following various stress paths. AIl the tests are performed on reconstituted medium dense specimens of Eastern Scheldt Sand....

  9. Waste foundry sand: Environmental implication and characterization

    Directory of Open Access Journals (Sweden)

    Gabriela Penkaitis

    2012-12-01

    Full Text Available This paper presents the results of analyses using Scanning Electron Microscopy in field samples of waste foundry sand, as well as the results of granulometric, chemical and groundwater analyses. Field data allowed to characterize waste foundry sand and showed that there are elevated concentrations of metals in the groundwater (iron, manganese, boron and selenium, in addition to other potentially toxic elements (chromium, copper, cobalt, nickel, zinc, aluminum, iron, manganese, which are present in the waste and are considered not hazardous by current standards. Even if these elements are not considered hazardous, their concentrations above the permissible limit compromise the environmental quality of the site, posing risks to the local population, since they work in agriculture and use groundwater. Two different types of waste foundry sands were identified using granulometric analyses. Electron microscopy showed features related to morphological, chemical and mineralogical characteristics of grains that make up the waste. Quartz was the dominant mineral. Waste foundry sand is composed of two types of grains: a rounded grain with almost no incrustations formed during alloy production, and a second type of grain, which is not rounded, has incrustations, and always has several metals derived from alloys and associated with these incrustations. Chemical elements detected in groundwater with concentrations above the limits established by the regulatory bodies were found in wells located in the landfill area. Most of these elements show higher concentrations downstream, some of them with concentrations above the regulatory limit, and others show an increase in concentration upstream, indicating that the landfill may be impacting the local environment.

  10. American Las Vegas Sands Corp. Visiting Beijing

    Institute of Scientific and Technical Information of China (English)

    Li Yinghong; Liu Jinliang

    2006-01-01

    @@ On August 29, Wan Jifei, Chairman of CCPIT, meets the visiting delegation led by Sheldon G. Adelson,Chairman of the Board and principal owner of Las Vegas Sands Corp. in CCPIT. Zhao Zhenge, Vice Director of International Connection Department of CCPIT, Luo Guoxiong from Beijing China Exhibition Investment Company, Xu Jingyi, Assistant Director of American and Oceanian Affairs Division of CCPIT, also attended the meeting.

  11. Oil sands mining water use and management

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.; Long, D.; Fitch, M. [Golder Associates Ltd., Calgary, AB (Canada)

    2010-07-01

    There are currently 4 bitumen mining operations operating along the Athabasca River in northern Alberta. This paper presented details of the water licences, historical water use, present water use, and future plans for water management in relation to oil sands mining operations. The study was based on work currently conducted for the Oil Sands Developers Group (OSDG) and Canadian Association of Petroleum Producers (CAPP), as well as on mine site water balance analyses for proposed mines in the region. Typical mine site water balances were discussed, and water use rates for the mining operations were reviewed. The new Athabasca River water management framework may require that mines provide additional water storage or delayed reclamation of mine areas in order to offset water losses during winter low-flow periods. New regulations may also reduce the requirement for make-up water. The study also noted that release criteria are still being developed for on-site water within closed-loop mine operations. The oil sands industry will need to balance various factors related to water use in the future. 5 refs., 3 figs.

  12. DYNAMIC EFFECTIVE SHEAR STRENGTH OF SATURATED SAND

    Institute of Scientific and Technical Information of China (English)

    邵生俊; 谢定义

    2002-01-01

    The dynamic effective shear strength of saturated sand under cyclic loading is discussed in this paper. The discussion includes the transient time dependency behaviors based on the analysis of the results obtained in conventional cyclic triaxial tests and cyclic torsional shear triaxial tests. It has been found that the dynamic effective shear strength is composed of effective frictional resistance and viscous resistance, which are characterized by the strain rate dependent feature of strength magnitude, the coupling of consolidation stress with cyclic stress and the dependency of time needed to make the soil strength suffciently mobilized, and can also be expressed by the extended Mohr-Coulomb's law. The two strength parameters of the dynamic effective internal frictional angle φd and the dynamic viscosity coefficient η are determined. The former is unvaried for different number of cyclic loading, dynamic stress form and consolidation stress ratio. And the later is unvaried for the different dynamic shear strain rate γt developed during the sand liquefaction, but increases with the increase of initial density of sand. The generalization of dynamic effective stress strength criterion in the 3-dimensional effective stress space is studied in detail for the purpose of its practical use.

  13. Collaborative production management for oil sands operations

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Andrew [Matrikon (Canada)

    2011-07-01

    This paper gives an overview of the collaborative production management of oil sands operations. Some characteristics of oil sands operations include oil treatment, hydro treating, diluent addition, logistics, and environmental impact assessments. Some of the business challenges include regulatory uncertainty, a fluid workforce and a technology still in the process of being developed. Improvement is only possible when process is assessed and measured; hence, production data management is very important. Production data measurements encompass such areas as planning, documentation and transactions. Regulatory data reporting is represented using a flow chart. The concepts of business application architecture and functional reference modeling are also explained. Benchmarking plays a vital role, some aspects of which would be technology, automation and integration. Certain advantages of timely assessment are increased production, equity, and goodwill as well as reduction in costs, risk, and capital requirements. The relevance and importance of collaboration, awareness of web technology and aggregate information are also explained. From the study, it can be concluded that the key to overall improvement in the oil sands industry will be improved production management.

  14. Recycled sand in lime-based mortars.

    Science.gov (United States)

    Stefanidou, M; Anastasiou, E; Georgiadis Filikas, K

    2014-12-01

    The increasing awareness of the society about safe guarding heritage buildings and at the same time protecting the environment promotes strategies of combining principles of restoration with environmentally friendly materials and techniques. Along these lines, an experimental program was carried out in order to investigate the possibility of producing repair, lime-based mortars used in historic buildings incorporating secondary materials. The alternative material tested was recycled fine aggregates originating from mixed construction and demolition waste. Extensive tests on the raw materials have been performed and mortar mixtures were produced using different binding systems with natural, standard and recycled sand in order to compare their mechanical, physical and microstructure properties. The study reveals the improved behavior of lime mortars, even at early ages, due to the reaction of lime with the Al and Si constituents of the fine recycled sand. The role of the recycled sand was more beneficial in lime mortars rather than the lime-pozzolan or lime-pozzolan-cement mortars as a decrease in their performance was recorded in the latter cases due to the mortars' structure.

  15. Permeability Tests on Silkeborg Sand No. 0000

    DEFF Research Database (Denmark)

    Lund, Willy; Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Silkeborg Sand No. 0000. The permeability is determined by use of a falling head apparatus. The apparatus, test procedures and the analysis method are described...... in the succeeding sections. Finally the test results are briefly summarised and a relationship between void ratio l and permeability is established....

  16. The bituminous sands : a Canadian mirage?

    Energy Technology Data Exchange (ETDEWEB)

    Rousse, D.R. [Quebec Univ., Chicoutimi, PQ (Canada). Dept. des Sciences Appliquees; Nasr, G.J. [Lebanese Univ., Roumieh (Lebanon). Faculty of Engineering; Turcotte, S.F. [Quebec Univ., Montreal, PQ (Canada). Centre d' Etudes Internationales et Mondialisation; Salah, N.B. [Ecole Superieure des Sciences et Techniques De Tunis, Tunis (Tunisia). LMMP

    2009-07-01

    This paper examined the controversy about the potential role of a significant increase in Canadian oil sands production in order to bridge the upcoming gap between the world's increasing energy demand and the total recoverable oil supply. The paper presented the actual potential of different scenarios and considered the prediction cost forecasts. A brief overview of environmental impacts and the real return on investments were also provided. Environmental impacts that were considered included land degradation; water contamination; ecosystem damage; and air pollution. Nuclear energy was also presented as a possible solution. The paper demonstrated that even in a very optimistic scenario, Canada's oil sands accelerated production has a negligible effect on the aforementioned gap, has a considerable impact on environment that has yet to be accounted for. Energy ratios that were presented included energy return on energy investment; energy available on energy used; and energy payback. It was concluded that enhanced recovery techniques are clearly needed for future sustainable exploitation of these bituminous sands. 32 refs., 1 fig.

  17. Summertime View of North Polar Sand Dunes

    Science.gov (United States)

    2006-01-01

    10 October 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a suite of dunes in one of the several north polar dune fields. The bright surfaces adjacent to some of the dunes are patches of frost. These dunes spend much of the autumn, winter, and spring seasons covered with carbon dioxide frost. Only in late spring and in summer are the dark windblown sands fully exposed. Over the course of the 9+ years of the MGS mission, the MOC team has sought evidence that sand dunes may be migrating downwind over time. However, no clear examples of the movement of a whole dune have been identified. On Earth, such movement is typically detectable in air photos of the smallest active dunes over periods of a few years. Owing to the fact that the north polar dunes spend much of each martian year under a cover of frost, perhaps these move much more slowly than their frost-free, terrestrial counterparts. The sand may also be somewhat cemented by ice or minerals, likewise preventing vigorous dune migration in the present environment. This view covers an area approximately 3 km (1.9 mi) wide and is illuminated by sunlight from the lower left. The dunes are located near 79.8oN, 127.1oW, and the picture was acquired on 11 September 2006.

  18. The sedimentary structure of linear sand dunes

    Science.gov (United States)

    Bristow; Bailey; Lancaster

    2000-07-06

    Linear sand dunes--dunes that extend parallel to each other rather than in star-like or crescentic forms--are the most abundant type of desert sand dune. But because their development and their internal structure are poorly understood, they are rarely recognized in the rock record. Models of linear dune development have not been able to take into account the sub-surface structure of existing dunes, but have relied instead either on the extrapolation of short-term measurements of winds and sediment transport or on observations of near-surface internal sedimentary structures. From such studies, it has not been clear if linear dunes can migrate laterally. Here we present images produced by ground penetrating radar showing the three-dimensional sedimentary structure of a linear dune in the Namib sand sea, where some of the world's largest linear dunes are situated. These profiles show clear evidence for lateral migration in a linear dune. Moreover, the migration of a sinuous crest-line along the dune produces divergent sets of cross-stratification, which can become stacked as the dune height increases, and large linear dunes can support superimposed dunes that produce stacked sets of trough cross-stratification. These clear structural signatures of linear dunes should facilitate their recognition in geological records.

  19. The Effect of Soil Particle Arrangement on Shear Strength Behavior of Silty Sand

    Directory of Open Access Journals (Sweden)

    Nik Norsyahariati Nik Daud

    2016-01-01

    Full Text Available The presence of fines in sandy soil is recognized as a problem in geotechnical engineering. It is often assumed that the strength and liquefaction potential of a soil decreases with increasing fines content. Sand with a significant amount of fines is always encountered in geotechnical engineering projects. The main interest of this paper is to study the effect of particles arrangement and stress behaviour on sand and silty sand sample. The objectives are to determine the basic properties as well as the morphological and mineralogical properties and the relationship of those properties to the stress behaviour of the soils. Sand-silt mixtures with fines contents of 20% and 40% were prepared and a series of testing was carried out to determine their basic properties, morphological and thin section properties, and mechanical properties by using direct shear box equipment. Results show that the basic properties and morphological properties of soil affect the mechanical behaviour of soil. Shape of the soil particle can influence the packing of the soil, hence altering the mechanical behaviour of the soil. From the thin section, the soil is observed to be well graded and have a dense packing while the minerals observed were mainly quartz and rutile.

  20. Investing in our future : responding to the rapid growth of oil sands development : final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-29

    This action plan addressed current challenges facing communities in the Fort McMurray region as a result of the rapid growth of the oil sands industry, with particular reference to the impacts of oil sands development over the next 5-year period. Current and anticipated gaps in local services were identified for housing; transportation; municipal infrastructure; health care; education; social services; policing; and the environment. The report demonstrated that the population of Fort McMurray will continue to grow at approximately 8 per cent over the next 5 years. The housing shortage in Fort McMurray has compounded the challenge of retaining workforces needed to expand the oil sands industry. The regional municipality is no longer able to fund critical infrastructure projects for water treatment and solid waste. Health services are also inadequate, and transportation issues are becoming a major concern. The report determined that planning is needed to ensure the equal allocation of resources among different communities. Coordination between the province and governmental agencies is also needed. Recommendations include investment in infrastructure; the development of policies and research to promote enhanced oil recovery; sustainable development; and business planning for high growth areas. Industry should continue to contribute to the community in substantial ways, and increases in manpower should be provided to Alberta Environment to focus on the cumulative effects of oil sands mining in the region. Further specific recommendations were provided to address infrastructure gaps in the region. 25 tabs., 12 figs.

  1. Life cycle Greenhouse gas emissions of current Oil Sands Technologies: surface mining and in situ applications.

    Science.gov (United States)

    Bergerson, Joule A; Kofoworola, Oyeshola; Charpentier, Alex D; Sleep, Sylvia; Maclean, Heather L

    2012-07-17

    Life cycle greenhouse gas (GHG) emissions associated with two major recovery and extraction processes currently utilized in Alberta's oil sands, surface mining and in situ, are quantified. Process modules are developed and integrated into a life cycle model-GHOST (GreenHouse gas emissions of current Oil Sands Technologies) developed in prior work. Recovery and extraction of bitumen through surface mining and in situ processes result in 3-9 and 9-16 g CO(2)eq/MJ bitumen, respectively; upgrading emissions are an additional 6-17 g CO(2)eq/MJ synthetic crude oil (SCO) (all results are on a HHV basis). Although a high degree of variability exists in well-to-wheel emissions due to differences in technologies employed, operating conditions, and product characteristics, the surface mining dilbit and the in situ SCO pathways have the lowest and highest emissions, 88 and 120 g CO(2)eq/MJ reformulated gasoline. Through the use of improved data obtained from operating oil sands projects, we present ranges of emissions that overlap with emissions in literature for conventional crude oil. An increased focus is recommended in policy discussions on understanding interproject variability of emissions of both oil sands and conventional crudes, as this has not been adequately represented in previous studies.

  2. How extensive is the effect of modern farming on bird communities in a sand dune desert?

    Directory of Open Access Journals (Sweden)

    Faris Khoury

    2009-12-01

    Full Text Available Bird community structure and diversity measures in sand dune habitats far from and close to modern farms in Wadi Araba, south-west Jordan, were compared using 52 line transects for breeding birds and habitat variables. A change in the bird community of sand dunes surrounding farming projects was measured to a distance of 1 km, but could neither be related to changes in habitat structure nor to the activity of op- portunistic predators (Red Fox as these did not vary significantly between the two samples. The farms included lines of trees and offered a constant source of water, which attracted a variety of opportunistic species, thus increasing bird diversity and total bird abundances. The absence of characteristic ground-dwelling species of open sand dune habitats in the structurally intact sand dunes surrounding farms was likely to be the result of localized, but effectively far-reaching habitat modification (farms acting as barriers and/or competition with some of the opportunistic species, which were common around farms.

  3. Modeling Cape- and Ridge-Associated Marine Sand Deposits; A Focus on the U.S. Atlantic Continental Shelf

    Science.gov (United States)

    Bliss, James D.; Williams, S. Jeffress; Bolm, Karen S.

    2009-01-01

    Cape- and ridge-associated marine sand deposits, which accumulate on storm-dominated continental shelves that are undergoing Holocene marine transgression, are particularly notable in a segment of the U.S. Atlantic Continental Shelf that extends southward from the east tip of Long Island, N.Y., and eastward from Cape May at the south end of the New Jersey shoreline. These sand deposits commonly contain sand suitable for shore protection in the form of beach nourishment. Increasing demand for marine sand raises questions about both short- and long-term potential supply and the sustainability of beach nourishment with the prospects of accelerating sea-level rise and increasing storm activity. To address these important issues, quantitative assessments of the volume of marine sand resources are needed. Currently, the U.S. Geological Survey is undertaking these assessments through its national Marine Aggregates and Resources Program (URL http://woodshole.er.usgs.gov/project-pages/aggregates/). In this chapter, we present a hypothetical example of a quantitative assessment of cape-and ridge-associated marine sand deposits in the study area, using proven tools of mineral-resource assessment. Applying these tools requires new models that summarize essential data on the quantity and quality of these deposits. Two representative types of model are descriptive models, which consist of a narrative that allows for a consistent recognition of cape-and ridge-associated marine sand deposits, and quantitative models, which consist of empirical statistical distributions that describe significant deposit characteristics, such as volume and grain-size distribution. Variables of the marine sand deposits considered for quantitative modeling in this study include area, thickness, mean grain size, grain sorting, volume, proportion of sand-dominated facies, and spatial density, of which spatial density is particularly helpful in estimating the number of undiscovered deposits within an

  4. Shaly sand formation evaluation in tight gas sands using electrochemical potential measurements

    Science.gov (United States)

    Sharma, M. M.; Jin, M.

    1991-08-01

    Equations are developed that directly relate the shaly conductivity to the electrochemical (membrane) potential (EP). The model is applied to both fully and partially saturated sands. The relationship between the resistivity index and the water saturation is also expressed in terms of a single membrane potential measurement. The Ep measured at different salinities are compared with model prediction using a single membrane potential measurement. Sigma (sub 0) versus Sigma (sub w) curves are then generated using the model equations and compared with measured curves. Experimental results are presented for electrochemical potential measurement made in the lab on 50 tight gs sand samples. It is shown that the measurements can be correlated with CEC although the CEC measured by grinding up the samples was always higher than that estimated from Ep measurements. The Ep measurements are combined with the equations for partial saturation developed in the report to obtain water saturations in a tight gas sand well. Through the example it is shown that it is possible to determine the water saturation in Shaly sands from one membrane potential measurement at a known salinity together with a set of resistivity logs. The results clearly demonstrate the applicability of the method as a practical procedure for Shaly sand information evaluation.

  5. Dynamic Behavior of Sand: Annual Report FY 11

    Energy Technology Data Exchange (ETDEWEB)

    Antoun, T; Herbold, E; Johnson, S

    2012-03-15

    Currently, design of earth-penetrating munitions relies heavily on empirical relationships to estimate behavior, making it difficult to design novel munitions or address novel target situations without expensive and time-consuming full-scale testing with relevant system and target characteristics. Enhancing design through numerical studies and modeling could help reduce the extent and duration of full-scale testing if the models have enough fidelity to capture all of the relevant parameters. This can be separated into three distinct problems: that of the penetrator structural and component response, that of the target response, and that of the coupling between the two. This project focuses on enhancing understanding of the target response, specifically granular geomaterials, where the temporal and spatial multi-scale nature of the material controls its response. As part of the overarching goal of developing computational capabilities to predict the performance of conventional earth-penetrating weapons, this project focuses specifically on developing new models and numerical capabilities for modeling sand response in ALE3D. There is general recognition that granular materials behave in a manner that defies conventional continuum approaches which rely on response locality and which degrade in the presence of strong response nonlinearities, localization, and phase gradients. There are many numerical tools available to address parts of the problem. However, to enhance modeling capability, this project is pursuing a bottom-up approach of building constitutive models from higher fidelity, smaller spatial scale simulations (rather than from macro-scale observations of physical behavior as is traditionally employed) that are being augmented to address the unique challenges of mesoscale modeling of dynamically loaded granular materials. Through understanding response and sensitivity at the grain-scale, it is expected that better reduced order representations of response can

  6. STUDY ON HOT SAND COOLING EQUIPMENT WITH DAMPING SAND CASCADE AND VERTICAL SPOUTED-FLUIDIZED BED

    Institute of Scientific and Technical Information of China (English)

    L.C. Wang; F. Wang; X.H. You

    2005-01-01

    A new kind of hot sand cooling equipment with vertical spouted-fluidized bed is developed in this paper. It is similar to the traditional horizontal vibrating fluidized boiling cooler in principle but different from it in structure. The processing principle of the cooler is analyzed. The influence of main structural and processing parameters on the cooling effect and its mechanism are researched. Other characteristics of the cooler are discussed also. Experiment results show that the cooling efficiency η is equal to or larger than 83%, the temperature of output sand is less than 40℃ with the temperature of input sand is about between 80 and 90℃, and the productivity is 5t/(h·m)

  7. Small Strain Behaviour and Viscous Effects on Sands and Sand-Clay Mixtures

    Science.gov (United States)

    Di Benedetto, H.

    This lecture paper focuses on sands and sand-clay mixtures behaviour in the small strain domain. Non viscous and viscous components are measured, identified and modelled within the framework of a 3 component model. Two precision prototype devices (triaxial and hollow cylinder) both equipped with piezoelectric sensors are used. Non viscous measured behaviour considering small quasi-static cycles and wave properties are compared with simulations obtained from 2 recently formulated anisotropic hypoelastic models (DBGS and DBGSP). Then, viscous experimental part is compared with the proposed model prediction. This model is an asymptotic expression, for the small strain domain, of a viscous evanescent formalism proposed by the author. It takes into account very peculiar behaviour observed on sands. Simulation for loadings with and without rotation of axes and for different rate histories, are quite satisfactory.

  8. Policy Analysis of the Canadian Oil Sands Experience

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-09-01

    For those who support U.S. oil sands development, the Canadian oil sands industry is often identified as a model the U.S. might emulate, yielding financial and energy security benefits. For opponents of domestic oil sands development, the Canadian oil sands experience illustrates the risks that opponents of development believe should deter domestic policymakers from incenting U.S. oil sands development. This report does not seek to evaluate the particular underpinnings of either side of this policy argument, but rather attempts to delve into the question of whether the Canadian experience has relevance as a foundational model for U.S. oil sands development. More specifically, this report seeks to assess whether and how the Canadian oil sands experience might be predictive or instructive in the context of fashioning a framework for a U.S. oil sands industry. In evaluating the implications of these underpinnings for a prospective U.S. oil sands industry, this report concentrates on prospective development of the oil sands deposits found in Utah.

  9. Cytotoxicity of yellow sand in lung epithelial cells

    Indian Academy of Sciences (India)

    Y H Kim; K S Kim; N J Kwak; K H Lee; S A Kweon; Y Lim

    2003-02-01

    The present study was carried out to observe the cytotoxicity of yellow sand in comparison with silica and titanium dioxide in a rat alveolar type II cell line (RLE-6TN). Yellow sand (China Loess) was obtained from the loess layer in the Gunsu Province of China. The mean particle diameter of yellow sand was about 0.003 ± 0.001 mm. Major elements of yellow sand were Si(27.7 ± 0.6%), Al(6.01 ± 0.17%), and Ca(5.83 ± 0.23%) in that order. Silica and yellow sand significantly decreased cell viability and increased [Ca2+]i. All three particles increased the generation of H2O2. TiO2 did not change Fenton activity, while silica induced a slight increase of Fenton activity. In contrast, yellow sand induced a significant increase of Fenton activity. Silica, yellow sand and TiO2 induced significant nitrite formations in RLE-6TN cells. Silica showed the highest increase in nitrite formation, while yellow sand induced the least formation of nitrite. Silica and yellow sand increased the release of TNF-. Based on these results, we suggest that yellow sand can induce cytotoxicity in RLE-6TN cells and reactive oxygen species, Fenton activity and reactive nitrogen species might be involved in this toxicity.

  10. Mineral Resource Assessment of Marine Sand Resources in Cape- and Ridge-Associated Marine Sand Deposits in Three Tracts, New York and New Jersey, United States Atlantic Continental Shelf

    Science.gov (United States)

    Bliss, James D.; Williams, S. Jeffress; Arsenault, Matthew A.

    2009-01-01

    geographic, economic, preemptive use, environmental, geologic and political factors. In addition, offshore sand resources should only be considered if the area is seaward of the active zone of significant nearshore sediment transport, about 10 to 12 m in depth, and in sufficiently shallow water so that sand can be extracted within U.S. dredging equipment limits, currently about 40 m in depth. If the material is to be used for beach nourishment, material must be of an appropriate sediment texture and character (grain size, sorting, shape, and color) to match the native beach and have mineralogical properties important to its use. Extraction of sand can disturb or alter the benthic habitat and seafloor ecology, so these factors and other site-specific effects will need to be evaluated for any intended use. These and other factors are not considered in this report but can be expected to reduce the total net volume of sand resources available for production. The purpose of this report is to describe and present results from a probabilistic mineral modeling technique previously applied to onshore mineral resources. This modeling and assessment procedure is being used for the first time to assess and estimate offshore aggregate resources; this study is part of the U.S. Geological Survey (USGS) Marine Aggregates Resources and Processes Project (http://woodshole.er.usgs.gov/project-pages/aggregates/).

  11. Influence of silicate on the transport of bacteria in quartz sand and iron mineral-coated sand.

    Science.gov (United States)

    Dong, Zhe; Yang, Haiyan; Wu, Dan; Ni, Jinren; Kim, Hyunjung; Tong, Meiping

    2014-11-01

    The influence of silicate on the transport and deposition of bacteria (Escherichia coli) in packed porous media were examined at a constant 20 mM ionic strength with different silicate concentrations (from 0 to 1 mM) at pH 7. Transport experiments were performed in two types of representative porous media, both bare quartz sand and iron mineral-coated quartz sand. In bare quartz sand, the breakthrough plateaus in the presence of silicate in suspensions were lower and the corresponding retained profiles were higher than those without silicate ions, indicating that the presence of silicate in suspensions decreased cell transport in bare quartz sand. Moreover, the decrease of bacteria transport in quartz sand induced by silicate was more pronounced with increasing silicate concentrations from 0 to 1 mM. However, when EPS was removed from cell surfaces, the presence of silicate in cell suspensions (with different concentrations) did not affect the transport behavior of bacteria in quartz sand. The interaction of silicate with EPS on cell surfaces negatively decreased the zeta potentials of bacteria, resulting in the decreased cell transport in bare quartz sand when silicate was copresent in bacteria suspensions. In contrast, the presence of silicate in suspensions increased cell transport in iron mineral-coated sand. Silicate ions competed with bacteria for the adsorption sites on mineral-coated sand, contributing to the increased cell transport in mineral-coated sand with silicate present in cell suspensions.

  12. Removal of Cryptosporidium and polystyrene microspheres from swimming pool water with sand, cartridge, and precoat filters.

    Science.gov (United States)

    Amburgey, James E; Walsh, Kimberly J; Fielding, Roy R; Arrowood, Michael J

    2012-03-01

    Cryptosporidium has caused the majority of waterborne disease outbreaks in treated recreational water venues in the USA for many years running. This research project evaluated some common US swimming pool filters for removing Cryptosporidium oocysts, 5-µm diameter polystyrene microspheres, and 1-µm diameter polystyrene microspheres. A 946 L hot tub with interchangeable sand, cartridge, and precoat filters was used at room temperature for this research. Simulated pool water for each experiment was created from Charlotte, NC (USA) tap water supplemented with alkalinity, hardness, chlorine, and a mixture of artificial sweat and urine. Precoat (i.e., diatomaceous earth and perlite) filters demonstrated pathogen removal efficiencies of 2.3 to 4.4 log (or 99.4-99.996%). However, sand and cartridge filters had average Cryptosporidium removals of 0.19 log (36%) or less. The combined low filter removal efficiencies of sand and cartridge filters along with the chlorine-resistant properties of Cryptosporidium oocysts could indicate a regulatory gap warranting further attention and having significant implications on the protection of public health in recreational water facilities. The 5-µm microspheres were a good surrogate for Cryptosporidium oocysts in this study and hold promise for use in future research projects, field trials, and/or product testing on swimming pool filters.

  13. Model study on winning of Canadian oil sands in open pit mines

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, W.

    1980-11-01

    The oil sands of the Athabaska River in the Canadian Province of Alberta, with a geologically demonstrated oil content of 101 gigatons, are among the most important oil sand deposits in the world. Currently CONCOR and SYNCRUDE are pusing ahead with extraction plants with a design capacity of 65 000 and 125 000 barrels per calendar day. Interest in the oil sands has increased in recent years with increasing oil prices, and future projects are now being prepared. In view of the not inconsiderable encroachment which open pit mines, and particularly the dumping of extraction residues, will make on the landscape, recultivation is of major importance. It introduces large tasks for current and future operators since the extreme climatic conditions, shortage of earth capable of being recultivated, and the nature of the residues of the extraction plants make the restoration of the landscape difficult to a high degree. To shed light on the technical-economic aspects, and particularly the ecological aspects of future projects, the Department of Environment of the Province of Alberta granted the firms Techman Ltd., Calgary, and Rheinbraun Consulting GmbH, Cologne, the contract for the working out of a model study in 1977. The findings of this study reproduced here in shortened and summarized form.

  14. AEROSOL FILTRATION USING QUARTZ SAND FILTER

    Directory of Open Access Journals (Sweden)

    Abbas H. Sulaymon

    2012-01-01

    Full Text Available The cement industry is the major source of cement dust which contains heavy metals like nickel, cobalt, lead, chromium, arsenic and hazardous substances like dioxins and furans. Exposure to these substances can cause health problems to human, animals and vegetation. A continuous pilot scale quartz sand filter was constructed and uses to study the effect of important design parameters (temperature, pre-loaded dust on the collector, diameter of the filter, bed depth, collector size and superficial velocity on its performance for cleaning of cement dust from air. Initial penetration and initial pressure drop (after 180s were measured and compared for different variables used in this study. The dirty bed was cleaned by means of reverse air flow when the pressure drop across the filter rises to 20 cmH2O. A macroscopic model describes the filter clogging was used to predict the effluent histories based on initial collection efficiency (η0exp which was determined from experimental data. A removal efficiency of more than 99% was obtained. The results show that 0.4% of cement dust still adheres on the quartz sand bed after 5 min of cleaning cycle. The presence of 0.4% of pre-load dust on the quartz sand filter enhanced the efficiency and low initial penetration, moderate initial pressure drop was obtained. At given Empty Bed Contact Time (EBCT, with different filter diameters 30 and 15 cm, a sharp decrease in initial penetration from 0.41-0.03 was obtained respectively. A nonlinear relationship between penetration and temperature was found. The initial penetration can be reduced by using smaller filter diameter, small collector size and collector with pre-load dust with 0.4%. The experiment that operates at a filter diameter of 15 cm and temperature of 25°C represent the minimum penetration among all the experiments.

  15. Mars Rover Curiosity Traverses of Sand Ripples

    Science.gov (United States)

    Stein, N.; Arvidson, R. E.; Zhou, F.; Heverly, M.; Maimone, M.; Hartman, F.; Bellutta, P.; Iagnemma, K.; Senatore, C.

    2014-12-01

    Martian sand ripples present a challenge for rover mobility, with drives over ripples often characterized by high wheel sinkage and slippage that can lead to incipient embedding. Since landing in Gale Crater, Curiosity has traversed multiple sand ripples, including the transverse aeolian ridge (TAR) straddling Dingo Gap on sols 533 and 535. On sol 672, Curiosity crossed backward over a series of sand ripples before ending its drive after high motor currents initiated visual odometry (VO) processing, which detected 77% slip, well in excess of the imposed 60% slip limit. At the end of the drive, the right front wheel was deeply embedded at the base of a ripple flank with >20 cm sinkage and the rear wheels were near a ripple crest. As Curiosity continues its approach to Mount Sharp it will have to cross multiple ripples, and thus it is important to understand Curiosity's performance on sol 672 and over similar ripples. To this end the sol 672 drive was simulated in ARTEMIS (Adams-Based Rover Terramechanics Interaction Simulator), a software tool consisting of realistic rover mechanical models, a wheel-terrain interaction module for deformable and non-deformable surfaces, and realistic terrain models. ARTEMIS results, Dumont Dunes tests performed in the Mojave Desert using the Scarecrow test rover, and single wheel tests performed at MIT indicate that the high slip encountered on sol 672 likely occurred due to a combination of rover attack angle, ripple geometry, and soil properties. When ripple wavelength approaches vehicle length, the rover can reach orientations in which the leading wheels carry minimal normal loads and the trailing wheels sink deeply, resulting in high slippage and insufficient thrust to propel the rover over ripples. Even on relatively benign (i.e. low tilt) terrains, local morphology can impose high sinkage, thus impeding rover motion. Work is underway to quantify Curiosity's drive performance over various ripple geometries to retrieve soil

  16. TECHNIQUES ABOUT DIRECT OPTIMIZING CONTROL OF GREEN SAND QUALITY*

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Green sand casting is still a main method in the world at present and it is very significant to develop the technology of controlling green sand quality. A new concept, from contents test to contents control, is advanced. In order to realize the new idea, a new method to on-line test active clay and moisture of green sand - double powers energizing alternately (DPEA) method is put forwards. The principle of the new method is to energize standard sand sample with AC and DC powers and to test the electric parameters, and then, to calculate active clay and moisture of green sand by using artificial neural network (ANN). Based on this new method, a direct optimizing system for controlling green sand quality is developed. Techniques about testing and controlling methods, hardware and software are discussed.

  17. Thermo-Insulating Moulding Sand for thin Walled Castings

    Directory of Open Access Journals (Sweden)

    Cholewa M.

    2014-10-01

    Full Text Available In paper the selection of the composition and determination of main properties of novel moulding sand was described. The mail goal was to create moulding sand characterized by high thermal insulating properties in relations with low specific weight. This type of moulding sand will find application in thin walled castings with complex geometry, in particular for cores of the skeleton castings. In this work the results of the compressive strength, permeability and friability was presented. It was noted that aluminosilicate microspheres are suitable as moulding sand matrix. Influence of the polyglicol addition on quality and properties of the moulding sand was described. The use of the aluminosilicate microspheres allowed to obtain the moulding sand characterized by high insulation rate, low specific weight and good mechanical properties.

  18. Optimising the composition of natural moulding sands including thermal aspects

    Directory of Open Access Journals (Sweden)

    Jerzy St. Kowalski

    2011-04-01

    Full Text Available The paper discusses the problem of the choice of the moulding sand mixture composition in terms of the sand behaviour in contact withmolten metal. Studies of high-temperature phenomena make assessment of the sand composition applicability under real operatingconditions possible, thus leading to the elimination of sand-originating casting defects. The research was conducted on selected moulding materials included in the composition of traditional moulding sand mixtures without the addition of carbon. The effect of moulding sand composition and moisture content on the linear dilatation and stress-induced allotropic changes of quartz was examined. The analysis of these phenomena was based on 3D charts and maps generated from data collected during the tests.

  19. Removal of heavy metals through adsorption using sand

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The removal of four heavy metals i.e. Pb, Cr, Cu, and Zn from their aqueous solutions, using ordinary sand as an adsorbent, was studied at 20oC. The amount of metal adsorbed to form monolayer on sand(am), obtained from Langmuir isotherm, exhibited the preference of metals for sand in the order Pb>Cr>Cu>Zn. The heavy metal-sand adsorption phenomena can be illustrated on the basis of the interaction between surface functional group of silicates (sand) and the metal ions. It is deduced that sand can be used as a low cost adsorbent for the removal of heavy metal from wastewater (containing low conc. of metals), especially in the developing countries.

  20. Numerical study on deformation and failure of reinforced sand

    Institute of Scientific and Technical Information of China (English)

    PENG Fang-le; LI Jian-zhong; Tatsuoka Fumio

    2005-01-01

    In order to investigate the deformation and failure of reinforced sand, and the reinforcing mechanism of flexible and rigid reinforcement, a set of plane strain compression tests of dense Toyoura reinforced sand with planar reinforcement of a wide range of stiffness were analysed by a nonlinear finite element method. The analysis was incorporated into an energy-based elasto-plastic constitutive model for sand to develop a stress path-independent work-hardening parameter based on the modified plastic strain energy concept. Numerical results indicate that the global stress-strain relations of sand specimens are reinforced by using relatively flexible and rigid reinforcement, and an unreinforced sand specimen can be reasonably simulated by the current finite element method. It is also found that the reinforcing mechanism and progressive failure with a development of shear bands in reinforced sand can be reasonably examined by the finite element method.

  1. 'Sharks Teeth' -- Sand Dunes in Proctor Crater

    Science.gov (United States)

    2001-01-01

    Sometimes, pictures received from Mars Global Surveyor's Mars Orbiter Camera (MOC) are 'just plain pretty.' This image, taken in early September 2000, shows a group of sand dunes at the edge of a much larger field of dark-toned dunes in Proctor Crater. Located at 47.9oS, 330.4oW, in the 170 km (106 mile) diameter crater named for 19th Century British astronomer Richard A. Proctor (1837-1888), the dunes shown here are created by winds blowing largely from the east/northeast. A plethora of smaller, brighter ripples covers the substrate between the dunes. Sunlight illuminates them from the upper left.

  2. Sphere impact and penetration into wet sand

    Science.gov (United States)

    Marston, J. O.; Vakarelski, I. U.; Thoroddsen, S. T.

    2012-08-01

    We present experimental results for the penetration of a solid sphere when released onto wet sand. We show, by measuring the final penetration depth, that the cohesion induced by the water can result in either a deeper or shallower penetration for a given release height compared to dry granular material. Thus the presence of water can either lubricate or stiffen the granular material. By assuming the shear rate is proportional to the impact velocity and using the depth-averaged stopping force in calculating the shear stress, we derive effective viscosities for the wet granular materials.

  3. Heating tar sands formations to visbreaking temperatures

    Science.gov (United States)

    Karanikas, John Michael; Colmenares, Tulio Rafael; Zhang, Etuan; Marino, Marian; Roes, Augustinus Wilhelmus Maria; Ryan, Robert Charles; Beer, Gary Lee; Dombrowski, Robert James; Jaiswal, Namit

    2009-12-22

    Methods for treating a tar sands formation are described herein. Methods may include heating at least a section of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat may be controlled so that at least a majority of the section reaches an average temperature of between 200.degree. C. and 240.degree. C., which results in visbreaking of at least some hydrocarbons in the section. At least some visbroken hydrocarbon fluids may be produced from the formation.

  4. Biogenic crust dynamics on sand dunes

    CERN Document Server

    Kinast, Shai; Yizhaq, Hezi; Ashkenazy, Yosef

    2012-01-01

    Sand dunes are often covered by vegetation and biogenic crusts. Despite their significant role in dune stabilization, biogenic crusts have rarely been considered in studies of dune dynamics. Using a simple model, we study the existence and stability ranges of different dune-cover states along gradients of rainfall and wind power. Two ranges of alternative stable states are identified: fixed crusted dunes and fixed vegetated dunes at low wind power, and fixed vegetated dunes and active dunes at high wind power. These results suggest a cross-over between two different forms of desertification.

  5. Geology of the Athabasca oil sands

    Science.gov (United States)

    Mossop, G. D.

    1980-01-01

    In-place bitumen resources in the Alberta oil sands are estimated at 1350 billion barrels. Open-pit mining and hot water extraction methods, which involve the handling of huge tonnages of earth materials, are being employed in the two commercial plants now operating. In situ recovery methods will be required to tap the 90 percent of reserves that are too deeply buried to be surface mined. Development of in situ technologies will be painstaking and expensive, and success will hinge on their compatibility with extremely complex geological conditions in the subsurface.

  6. Sphere impact and penetration into wet sand

    KAUST Repository

    Marston, J. O.

    2012-08-07

    We present experimental results for the penetration of a solid sphere when released onto wet sand. We show, by measuring the final penetration depth, that the cohesion induced by the water can result in either a deeper or shallower penetration for a given release height compared to dry granular material. Thus the presence of water can either lubricate or stiffen the granular material. By assuming the shear rate is proportional to the impact velocity and using the depth-averaged stopping force in calculating the shear stress, we derive effective viscosities for the wet granular materials.

  7. Undrained Triaxial Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    In the process of understanding and developing models for geomaterials, the stress-strain behaviour is commonly studied by performing triaxial tests. In the present study, several types of static triaxial tests have been performed to gain knowledge of the undrained stress-strain behaviour...... of frictional materials during monotonic loading. The tests conducted includes undrained and constant volume tests, starting from different initial states of stress and following various stress paths. All the tests are performed on reconstituted loose to medium dense specimens of Eastern Scheldt Sand....

  8. Preliminary Observations from the 2014 Sand Dunes Experiment

    Science.gov (United States)

    2014-10-01

    2014 Sand Dunes Experiment by Christopher W. Miller, Ching-Sang Chiu, D. Benjamin Reeder, Ying-Jang Yang, Linus Chiu, and Chi-Fang Chen...COVERED (From-To) June 2014 4. TITLE AND SUBTITLE Preliminary Observations from the 2014 Sand Dunes Experiment 5a. CONTRACT NUMBER 5b. GRANT NUMBER...position of the Department of Defense or the U.S. Government 14. ABSTRACT The Sand Dunes 2014 experiment was international US – Taiwan

  9. MC-Parameter Calibration of Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Hanson, Mats; Hjort, T.;

    The soil parameters are dependent on both confining pressure and density index. The density index of Baskarp Sand can be determined by conducting cone penetration tests with the mini-CPT cone used in the Geotechnical Engineering Laboratory at Aalborg University. The unit weight of Baskarp Sand No...... several conventional drained triaxial tests at two different density indices performed on Baskarp Sand No. 15 (Ibsen & Bødker, 1994). The used triaxial tests are listed in Table 1 and Table 2....

  10. A soil emergence trap for collections of phlebotomine sand flies

    Directory of Open Access Journals (Sweden)

    Casanova Cláudio

    2001-01-01

    Full Text Available The identification of breeding sites of sand flies is of great epidemiological interest. A soil emergence trap for investigating potential sand fly breeding sites is described. The trap was tested in two rural areas in the Mogi Guaçu River Valley where the American cutaneous leishmaniasis is an endemic disease. Seventy-three sand fly individuals of three species, Lutzomyia intermedia s. l., L. whitmani and L. pessoai, were collected on the forest floor and peridomicile.

  11. Possibilities of preparation asphalt concrete by oil sands of Kazakhstan

    OpenAIRE

    Erbol Tileuberdi; Yerdos Ongarbayev; F. Behrendt; Schneider, I.; Yerzhan Imanbayev; B. Tuleutayev; Yerlan Doszhanov; Zulkhair Mansurov

    2012-01-01

    In the paper physicochemical properties of oil sands of Munayli-Mola deposits and efficient ways to use them for preparing asphalt concrete were represented. For determination of organic part of oil sands the extraction methods were used in Soxhlet apparatus by variety of solvents. It has been established 16 wt.% content of natural bitumen in oil sands, which compared with results of ash content determination. According to results of experiment, the natural bitumen is heavy oil and its charac...

  12. Microwave processing of oil sands and contribution of clay minerals

    OpenAIRE

    John P. Robinson; Binner, Eleanor; Saeid, Abdul; Al-Harahsheh, Mohammad; Kingman, S. W.

    2014-01-01

    This study establishes the feasibility of microwave heating for extracting oil from Oil Sands in ex-situ processes. Previous studies in this area have shown some potential, but have not characterised the dielectric properties of the Oil Sands used, nor related them to the mineral composition, both of which are vital if successful scale up is to be achieved. In this work the fundamental interactions of microwave energy with Oil Sands are investigated and understood for the first time, and the ...

  13. Seed Mucilage Improves Seedling Emergence of a Sand Desert Shrub

    OpenAIRE

    Xuejun Yang; Baskin, Carol C.; Baskin, Jerry M.; Guangzheng Liu; Zhenying Huang

    2012-01-01

    The success of seedling establishment of desert plants is determined by seedling emergence response to an unpredictable precipitation regime. Sand burial is a crucial and frequent environmental stress that impacts seedling establishment on sand dunes. However, little is known about the ecological role of seed mucilage in seedling emergence in arid sandy environments. We hypothesized that seed mucilage enhances seedling emergence in a low precipitation regime and under conditions of sand buria...

  14. Provenance of coastal dune sands along Red Sea, Egypt

    Indian Academy of Sciences (India)

    Samir M Zaid

    2017-06-01

    Texture, mineralogy, and major and trace element geochemistry of 26 coastal dune sand samples were studied to determine the provenance and tectonic environment of two dune fields close to the beaches of Safaga (SF) and Quseir (QS) at the Egyptian Red Sea coast. Onshore winds generate fine, moderate, moderately-well to well-sorted, coarse-skewed to near-symmetrical dune sands with mesokurtic distributions. Winds pick up and transport grains from nearby beach sands and alluvial deposits into a wide Red Sea coastal plain at the border of the beach. The mineralogical (Qt–Ft–Lt) and geochemical composition of the sands, indicate that SF and QS coastal dune sands are mature and influenced by quartz-rich sands. The average CIA values in SF and QS coastal dune sands are low relative to the range of the PAAS, suggesting an arid climate and a low intensity of chemical weathering. The SF and QS coastal dune sand samples are plotted in the recycled orogen and partly in craton interior fields suggesting recycled older sedimentary and partly metamorphic-plutonic sources. The high content of quartz with shell debris and carbonates in coastal dune sands support the recycled sedimentary beach and alluvial sand sources. The dominance of heavy minerals like amphiboles (hornblende) and biotite in the coastal dune sands also supports the effect of metamorphic-plutonic source rocks. The new tectonic discriminant-function diagrams suggest that the coastal dune sands were deposited in a passive margin of a synrift basin. The results provide a good evidence for the extension in the Red Sea rift system during Oligocene-post Pliocene, which is consistent with the general geology of Egypt.

  15. EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF FLUORIDE IN SAND

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-mei; SU Bao-yu

    2006-01-01

    The transport and transformation of fluoride in sand were studied by using soil tank test under the condition of saturated water in this article. Based on the analysis of the laboratory experiments, the rules of fluorine transportation and transformation were simulated in sand by solving the advection-diffusion equation. Through comparison between computed results and observed data , it is shown that the established model and determined parameters could be used to simulate the fluoride transport in sand.

  16. Wind-blown sand movement periods on the Nyírség alluvial fan, Hungary

    Science.gov (United States)

    Buró, Botond; Lóki, József; Sipos, György; Négyesi, Gábor; Andrási, Bence; Jakab, Attila; Félegyházi, Enikő; Molnár, Mihály

    2017-04-01

    Wind-blown sand movement periods on the Nyírség alluvial fan, Hungary The Nyírség is an alluvial fan, was built by rivers, which were flown down from the NE Carpathians. When the weather was dry, wind-blown sand was blowed out and the wind started to develop the aeolian landforms. The first significant sand movements in the Nyírség was in the Upper plenniglacial and the Late glacial. The main landforms of the Nyírség were developed at this time. The aeolic transformation of the land was not completed in the Nyírség at the end of the Pleistocene. In the Holocene the sand moved within small area, mainly by anthropogenic impact. Our aim is clarify the age of the wind-blown sand movements period, with different absolute (Radiocarbon dating method, OSL), and relative (Archaeological finds, Pollen analyses) dating methods. We have collected for the age determining charcoal from many sand quarry (Gégény, Kántorjánosi, Nyíradony, Nagyvarsány, Máriapócs and Lövőpetri) which contain fossil soil layer. For the OSL measurements samples were collected from Baktalórántháza, Gégény and Kántorjánosi sand quarries. We collected samples from 5 places for the pollen analyses (Nyírtanya, Máriapócs, Nyírbéltek-Nyírlúgos, Nyírábrány, Vámospércs), and also from an archaeological excavation (Nyíregyháza- Oros). The new age dates show us, that in the Nyírség the first significant sand movements were in the cold and drier period of the Upper pleniglacial and Late glacial (Baktalórántháza, Nyírtanya, Vámospércs). At the end of the Pleistocene the sand movements not competed in the Nyírség (Gégény, Kántorjánosi, Nyírábrány). In the Holocene there were many little sand movement periods, mainly caused by anthropogenic impact (Nyíradony, Nyíregyháza-Oros). The research was supported by the European Union and the State of Hungary, co-financed by the European Regional Development Fund in the project of GINOP-2.3.2.-15-2016-00009 'ICER

  17. Research on the different content of weathered sand influence on expansive characteristic of a highway expansive soil in Yichang

    Institute of Scientific and Technical Information of China (English)

    Yang Jun; Li Xinchun; Zhang Guodong; Tang Yunwei; Xie Zhigang

    2013-01-01

    This paper aims at widespread presence of expansive soil which can be obtained in the project from Xiaoxita to Yaqueling first-class highway rebuilding engineering in Yichang City of Hubei Province and weathered sand which can be made full use locally,many experiments have been made. Compaction experiments and expan-sibility index indoor experiments of undisturbed expansive soil and expansive soil mixed with sand ranging from 10%to 50%have been made. Through the test mixing undisturbed expansive soil with different content of weath-ered sand,it can change the expansive soil water characteristics and compaction characteristics. It can influence the expansibility of the expansive soil index and significantly inhibit the expansibility of the expansive soil and reach the standard of roadbed filler.

  18. Flow pattern and related chemical quality of ground water in the "500-foot" sand in the Memphis area, Tennessee

    Science.gov (United States)

    Bell, Edwin Allen; Nyman, Dale J.

    1968-01-01

    The '500-foot' sand is the major source of water supply for the Memphis area. Thick layers of impervious clay above and below the sand confine the water in the aquifer under artesian pressure and also protect the aquifer from contamination. Recharge from rainfall enters the '500-foot' sand in the outcrop, or intake area south and east of Memphis. Recharge from other aquifers enters the sand wherever the confining beds are breached or absent. Some of the recharge that enters the '500-foot' sand in eastern Arkansas moves down the gradients created by pumping in the Memphis area. All discharge from the '500-foot' sand in the Memphis area results from well pumping. Since 1886 continuous withdrawals at gradually increasing rates of pumping have lowered water levels and altered hydraulic gradients in the area. These withdrawals have resulted in changes in direction and velocity of movement of water through the '500-foot' sand. Water in the sand in the southeaster n part of the Memphis area normally moves from the (outcrop area east and south of Memphis northwestward toward points of withdrawal. In the northwestern part of the area, water moves southeastward toward points of withdrawal. A flow-net analysis of the aquifer shows that the rate of water movement through the '500-foot' sand in 1964, toward the major cones of depression in the Memphis area, was about 350 feet per year, or 1 mile in 15 years. A flow-net analysis projected for the year 1975 indicates the rate will increase by about 20 percent in the 12-year period 1964-75. Water in the '500-foot' sand in the Memphis area is generally a calcium magnesium sodium bicarbonate type. It is soft, low in dissolved solids, high in concentrations of iron and carbon dioxide, and slightly to moderately corrosive. The softest and least mineralized water occurs in the southeastern part of the area, and the water becomes slightly harder and more mineralized as it moves downdip toward Memphis. The hardest and most mineralized

  19. Oil sands to the rescue: oil sand microbial communities can degrade recalcitrant alkyl phenyl alkanoic acids

    Energy Technology Data Exchange (ETDEWEB)

    Whitby, Corinne [University of Essex (Canada)], email: cwhitby@essex.ac.uk

    2011-07-01

    Almost half of all global oil reserves are found as biodegraded heavy oils found in vast tar sand deposits located in North and South America and these account for 47% of Canadian oil production. Oil sand extraction generates large amounts of toxic waste water, known as oil sand process waters (OSPW), that are stored in large tailing ponds that contain toxic compounds like naphthenic acids (NAs). The presence of NAs creates problems like toxicity, corrosion, and the formation of calcium napthenate deposits which block pipelines and other infrastructure and need to be removed. This paper presents oil sand microbial communities that can degrade these NAs. The approach is to apply new aliphatic and aromatic NAs as substrates to supplement and identify NA degrading microbes and also to identify the metabolites produced and explain NA degradation pathways and the functional genes involved. The chemistry and the processes involved are explained. From the results, it is suggested that pure cultures of P. putida KT2440 be used against NAs.

  20. Modeling the response of shoreface-connected sand ridges to sand extraction on an inner shelf

    NARCIS (Netherlands)

    Nnafie, A.; de Swart, Huib; Calvete, D.; Garnier, R.

    2014-01-01

    Shoreface-connected sand ridges are rhythmic bedforms that occur on many storm-dominated inner shelves. The ridges span several kilometers, are a few meters high, and they evolve on a timescale of centuries. A processbased model is used to gain a fundamental insight into the response of these ridges

  1. Modeling the response of shoreface-connected sand ridges to sand extraction on an inner shelf

    NARCIS (Netherlands)

    Nnafie, A.; de Swart, Huib; Calvete, D.; Garnier, R.

    2014-01-01

    Shoreface-connected sand ridges are rhythmic bedforms that occur on many storm-dominated inner shelves. The ridges span several kilometers, are a few meters high, and they evolve on a timescale of centuries. A processbased model is used to gain a fundamental insight into the response of these ridges

  2. Chemical Stablilisation of Sand : Part VIII Furan Resins as Dune and Coastal Sand Stabiliser

    Directory of Open Access Journals (Sweden)

    Ram Gopal

    1990-04-01

    Full Text Available Studies on furan resin as dune sand stabiliser are presented. Influence of acid catalysts, viz. phenol disulphonic acid, sulphuric acid, hydrochloric acid and phosphoric acid and other catalysts, viz. trichlorotoluene and benzoyl chloride along with promoters, zinc chloride and ferric chloride, on the strength of stabilised furan resin-sand specimens has been discussed. Optimisation studies on resin content, catalysts and promoters and curing conditions have revealed that maximum strength of 260 kg/cm/sup 2/ of the standard specimens made by compaction of coastal sand using furan resins (10 per cent, sulphuric acid (9N, 30 per cent and a curing time of 2 hr at 40 degree Centigrade is higher than the 170 kg/cm/sup 2/ of specimens made of Rajasthan desert sand. Sandy patches stabilised by seepage technique recorded a maximum strength of 125 kg/cm/sup 2/. Physico-chemical characteristics of this system and effect of environment on stabilised specimens have also been studied and field trials conducted successfully. This resin-catalyst system would be extremely useful in humid and saline field (coastal areas for different military applications.

  3. Effect of upstream fencing on shelter zone behind solid models simulating sand formations and dunes

    Directory of Open Access Journals (Sweden)

    Mahmoud A. Hassan

    2013-04-01

    Moreover, results indicate that some dune/fence combinations may cause shifting of the dune upwind (instead of downwind in the absence of fence. This effect means that, with such combinations, a dune would eventually disappear. The distance between the model downwind base line and the location of reattachment (length of shelter zone was plotted against the distance of fence from upwind base line of model to determine the best possible dune/fence combination. Solid fencing (constructed from masonry bricks or stones to shelter isolated sand humps and dunes is effective in alleviating dangers on nearby structures (dune shifting upwind and to less sand drift and saltation downwind. Also, the results indicated that, it is recommended to start by dune fencing and give enough time for the project zone to widen and be effectively protected before starting the construction.

  4. Discovery and description of complete ammonium oxidizers in groundwater-fed rapid sand filters

    DEFF Research Database (Denmark)

    Palomo, Alejandro

    as biological filtration has long been acknowledged and recently been investigated. Biological filtration technology is widely used around the world and is especially important in Denmark as groundwater is the main source water for drinking water production. Because the groundwater has a relative high...... attention has been paid to the role of microorganisms in drinking water treatment technologies. In contrast, much effort has been devoted to eliminate potential pathogens in the drinking water treatment and supply systems. Nevertheless, the role of microbes in some drinking water treatments systems...... activity and roles in compound removal from the source water. This PhD project focused on a comprehensive investigation of the microbial communities in rapid sand filters beyond their purely taxonomical identification. For this purpose, samples collected from a rapid sand filter were subjected...

  5. Severe sand aspiration: a case report with complete recovery.

    Science.gov (United States)

    Glinjongol, Chanin; Kiatchaipipat, Surachai; Thepcharoenniran, Somchai

    2004-07-01

    A 5-year-old boy, previously healthy, was admitted to Ratchaburi Hospital after being buried in a sand pile. He presented with dyspnea and tachypnea. Chest radiograph showed opaque particles in both main and segmental bronchi (sand bronchogram). The first attempt of bronchoscopy was unsatisfactory as a considerable amount of sand particles had migrated further into the distal bronchi. A second bronchoscopy was performed with 0.9% saline lavage. Most of the sand particles were successfully removed. Intravenous steroids and antibiotics were administered for treatment. The patient was discharged uneventfully by the end of the first week of hospitalization.

  6. Olivine sand from Kawashiri Beach in Kagoshima, Japan

    OpenAIRE

    MATSUI, Tomoaki; マツイ, トモアキ; 松井, 智彰

    2001-01-01

    The olivine sand from Kawashiri Beach was studied by chemical and X-ray analyses. At least six groups of olivine are mixed in the olivine sand in this region, and they are classified according to the composition of the silicate-melt inclusions in them. The composition of the olivine sand ranges from Fo_70 to Fo_75, and the sum of the Mn_2SiO_4 and Ca_2SiO_4 content is less than 1 (mol %). These crystal chemical data for the olivine sand not only provide basic mineralogical info...

  7. [Influence of perlite sand on the skin in experiment].

    Science.gov (United States)

    Dracheva, E E; Iatsyna, I V; Lapina, N E; Ianin, V A; Antoshina, L I; Zhadan, I Iu; Krasavina, E K

    2012-01-01

    In the present work influence of perlite sand has been studied on a skin of Sprague-Dawley male rat (300-350 g). The biopsy of intact rat skin has been used as control. Contact of the perlite sand with animals' skin causes the reaction of an inflammation amplifying with increase of duration of the influence of substance. Therefore, despite an inert chemical compound, long contact with perlite sand in conditions of production can promote development of skin diseases. From the result of this investigation it is concluded that perlite sand causes irritating action on the skin and it is necessary to apply additional protective means to workers contacting to this substance.

  8. Numerical modeling of wind-blown sand on Mars.

    Science.gov (United States)

    Huang, HaoJie; Bo, TianLi; Zheng, XiaoJing

    2014-09-01

    Recent observation results show that sand ripples and dunes are movable like those on Earth under current Martian climate. And the aeolian process on Mars therefore is re-attracting the eyes of scientific researchers in different fields. In this paper, the spatial and temporal evolution of wind-blown sand on Mars is simulated by the large-eddy simulation method. The simulations are conducted under the conditions of both friction wind speed higher and lower than the "fluid threshold", respectively. The fluid entrainment of the sand particles, the processes among saltation sand particles and sand bed, and the negative feedback of sand movement to flow field are considered. Our results show that the "overshoot" phenomenon also exists in the evolution of wind-blown sand on Mars both temporally and spatially; impact entrainment affects the sand transport rate on Mars when the wind speed is smaller or larger than the fluid threshold; and both the average saltation length and height are one order of magnitudes larger than those on Earth. Eventually, the formulas describing the sand transport rate, average saltation length and height on Mars are given, respectively.

  9. Sand control mechanism analysis of metallic wool screen

    Energy Technology Data Exchange (ETDEWEB)

    Yongquan, H.; Jinzhou, Z.; Zhinjun, W.; Zhaofeng, L. [Southwest Petroleum Institute, China, (China); Lei, Y. [Liaohe petroleum Administration, China, (China)

    1997-08-01

    A filter prepacked with metallic wool was developed and claimed to have been effectively used on thermal and unconsolidated sand oil wells. Structural features of the filter screen and the factors having a bearing on its sand control function, such as particle characteristics, fluid properties, environmental conditions, and the filtering characteristics of metallic wool, were discussed. Some experimental results have been provided to illustrate desirable characteristics and advantages. According to this evidence, sanding velocity is highest at the beginning, stabilizing gradually. Production pressure drop must be appropriately adjusted to achieve best results with well sanding control. 9 refs., 1 tab., 5 figs.

  10. Trajectories of saltating sand particles behind a porous fence

    Science.gov (United States)

    Zhang, Ning; Lee, Sang Joon; Chen, Ting-Guo

    2015-01-01

    Trajectories of aeolian sand particles behind a porous wind fence embedded in a simulated atmospheric boundary layer were visualized experimentally, to investigate the shelter effect of the fence on sand saltation. Two sand samples, one collected from a beach (d = 250 μm) and the other from a desert (d = 100 μm), were tested in comparison with the previous studies of a 'no-fence' case. A wind fence (ε = 38.5%) was installed on a flat sand bed filled with each sand sample. A high-speed photography technique and the particle tracking velocimetry (PTV) method were employed to reconstruct the trajectories of particles saltating behind the fence. The collision processes of these sand particles were analyzed, momentum and kinetic energy transfer between saltating particles and ground surface were also investigated. In the wake region, probability density distributions of the impact velocities agree well with the pattern of no-fence case, and can be explained by a log-normal law. The horizontal component of impact velocity for the beach sand is decreased by about 54%, and about 76% for the desert sand. Vertical restitution coefficients of bouncing particles are smaller than 1.0 due to the presence of the wind fence. The saltating particles lose a large proportion of their energy during the collision process. These results illustrate that the porous wind fence effectively abates the further evolution of saltating sand particles.

  11. Effective Laboratory Method of Chromite Content Estimation in Reclaimed Sands

    Directory of Open Access Journals (Sweden)

    Ignaszak Z.

    2016-09-01

    Full Text Available The paper presents an original method of measuring the actual chromite content in the circulating moulding sand of foundry. This type of material is applied for production of moulds. This is the case of foundry which most frequently perform heavy casting in which for the construction of chemical hardening mould is used, both the quartz sand and chromite sand. After the dry reclamation of used moulding sand, both types of sands are mixed in various ratios resulting that in reclaimed sand silos, the layers of varying content of chromite in mixture are observed. For chromite recuperation from the circulating moulding sand there are applied the appropriate installations equipped with separate elements generating locally strong magnetic field. The knowledge of the current ratio of chromite and quartz sand allows to optimize the settings of installation and control of the separation efficiency. The arduous and time-consuming method of determining the content of chromite using bromoform liquid requires operational powers and precautions during using this toxic liquid. It was developed and tested the new, uncomplicated gravimetric laboratory method using powerful permanent magnets (neodymium. The method is used in the production conditions of casting for current inspection of chromite quantity in used sand in reclamation plant.

  12. Geologic and paleoecologic studies of the Nebraska Sand Hills

    Science.gov (United States)

    Ahlbrandt, Thomas S.; Fryberger, S.G.; Hanley, John H.; Bradbury, J. Platt

    1980-01-01

    PART A: The Nebraska Sand Hills are an inactive, late Quaternary, most probably Holocene, dune field (covering 57,000 km 2 ) that have been eroded along streams and in blowouts, resulting in excellent lateral and vertical exposures of the stratification of dune and interdune sediments. This paper presents new data on the geometry, primary sedimentary structures, modification of sedimentary structures, direction of sand movement, and petrography of these eolian deposits. Eolian deposits of the Sand Hills occur as relatively thin (9-24 m) 'blanket' sands, composed of a complex of dune and discontinuous, diachronous interdune deposits unconformably overlying fluviolacustrine sediments. The internal stratification of large dunes in the Sand Hills (as high as 100 m), is similar to the internal stratification of smaller dunes of the same type in the Sand Hills, differing only in scale. Studies of laminae orientation in the Sand Hills indicate that transverse, barchan, and blowout dunes can be differentiated in rocks of eolian origin using both the mean dip angle of laminae and the mean angular deviation of dip direction. A variety of secondary structures modify or replace primary eolian stratification in the Sand Hills, the more common of which are dissipation structures and bioturbation. Dissipation structures in the Sand Hills may develop when infiltrating water deposits clay adjacent to less permeable layers in the sand, or along the upper margins of frozen layers that form in the sands during winter. Cross-bed measurements from dunes of the Nebraska Sand Hills necessitate a new interpretation of the past sand transport directions. The data from these measurements indicate a general northwest-to-southeast drift of sand, with a more southerly drift in the southeast part of the Sand Hills. A large area of small dunes Sand Hills was interpreted by him on the basis of morphology only. We interpret these as transverse-ridge dunes that were generally moving to the south

  13. Falling sand tests on various coatings

    Energy Technology Data Exchange (ETDEWEB)

    Manetti, M.; Zonfrillo, G.; Pratesi, F. [Florence Univ. (Italy). Dipt. di Meccanica e Tecnologie Industriali; Giovannetti, I. [GE Oil and Gas - Nuovo Pilnone, Florence (Italy)

    2010-07-01

    Abrasive wear is responsible for severe machine parts and in particular of compressor impellers. Methods of increasing service lifetime are based on employment of abrasion resistant materials or more frequently of the creation of hard, wear-resistant surface layers. In this work a bare aluminium alloy and the same alloy with four different coatings have been tested at room temperature, in order to verify their resistance to falling abrasive. Following standard ASTM D968-93, tests have been performed using a precise quantity of sand as abrasive and letting it fall on the sample with a standard apparatus: two different kinds of sand have been used, in order to obtain also information on the influence of composition and Grain size of the abrasive on material resistance. Determinations of hardness, roughness, weight loss, and morphology of the eroded surface have also been carried out. The comparison between the coatings in vestilated has been performed on the basis of the thickness decrease of the samples. (orig.)

  14. Sulfur biogeochemistry of oil sands composite tailings

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Lesley; Stephenson, Kate [Earth Sciences, McMaster University (Canada)], email: warrenl@mcmaster.ca; Penner, Tara [Syncrude Environmental Research (Canada)

    2011-07-01

    This paper discusses the sulfur biogeochemistry of oil sands composite tailings (CT). The Government of Alberta is accelerating reclamation activities on composite tailings. As a CT pilot reclamation operation, Syncrude is currently constructing the first freshwater fen. Minor unpredicted incidents with H2S gas released from the dewatering process associated with these reclamations have been reported. The objective of this study is to ascertain the connection between microbial activity and H2S generation within CT and to assess the sulfur biogeochemistry of untreated and treated (fen) CT over seasonal and annual timescales. The microbial geochemical interactions taking place are shown using a flow chart. CT is composed of gypsum, sand, clay and organics like naphthenic acids and bitumen. Sulfur and Fe cycling in mining systems and their microbial activities are presented. The chemistry and the processes involved within CT are also given along with the results. It can be said that the diverse Fe and S metabolizing microorganisms confirm the ecology involved in H2S dynamics.

  15. TESTING OF TMR SAND MANTIS FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Krementz, D; William Daugherty, W

    2007-06-12

    Screening tests of Sand Mantis candidate materials selected for erosion resistance have been completed. The results of this testing identified that over a relatively short period of operation (<1 hour), measurable erosion will occur in each of the candidate zoom tube materials given equal operating exposure. Additionally, this testing has shown that erosion of the rubber discharge hose directly downstream of the vehicle could be expected to limit the service life of the discharge hose. On the basis of these test results, SRNL recommends the following; {lg_bullet} redesign of critical system components (e.g., zoom tube, discharge hose) should be conducted to improve system characteristics relative to erosion and capitalize on the results of this testing, {lg_bullet} continued efforts to deploy the Sand Mantis should include testing to better define and optimize operating parameters, and gain an understanding of system dynamics, {lg_bullet} discontinue wear testing with the selected materials pending redesign of critical system components (1st recommendation) and inclusion of other candidate materials. The final selection of additional candidate materials should be made following design changes, but might include a Stellite alloy or zirconia.

  16. Microstructural characterization of a Canadian oil sand

    CERN Document Server

    Dinh, Hong Doan; Nauroy, Jean-François; Tang, Anh-Minh; Souhail, Youssef; 10.1139/T2012-072

    2013-01-01

    The microstructure of oil sand samples extracted at a depth of 75 m from the estuarine Middle McMurray formation (Alberta, Canada) has been investigated by using high resolution 3D X-Ray microtomography ($\\mu$CT) and Cryo Scanning Electron Microscopy (CryoSEM). $\\mu$CT images evidenced some dense areas composed of highly angular grains surrounded by fluids that are separated by larger pores full of gas. 3D Image analysis provided in dense areas porosity values compatible with in-situ log data and macroscopic laboratory determinations, showing that they are representative of intact states. $\\mu$CT hence provided some information on the morphology of the cracks and disturbance created by gas expansion. The CryoSEM technique, in which the sample is freeze fractured within the SEM chamber prior to observation, provided pictures in which the (frozen) bitumen clearly appears between the sand grains. No evidence of the existence of a thin connate water layer between grains and the bitumen, frequently mentioned in th...

  17. Adaptation to life in aeolian sand: how the sandfish lizard, Scincus scincus, prevents sand particles from entering its lungs

    OpenAIRE

    Stadler, Anna T.; Vihar, Boštjan; Günther, Mathias; Huemer, Michaela; Riedl, Martin; Shamiyeh, Stephanie; Mayrhofer, Bernhard; Böhme, Wolfgang; Baumgartner, Werner

    2016-01-01

    ABSTRACT The sandfish lizard, Scincus scincus (Squamata: Scincidae), spends nearly its whole life in aeolian sand and only comes to the surface for foraging, defecating and mating. It is not yet understood how the animal can respire without sand particles entering its respiratory organs when buried under thick layers of sand. In this work, we integrated biological studies, computational calculations and physical experiments to understand this phenomenon. We present a 3D model of the upper res...

  18. Comparison of buried sand ridges and regressive sand ridges on the outer shelf of the East China Sea

    Science.gov (United States)

    Wu, Ziyin; Jin, Xianglong; Zhou, Jieqiong; Zhao, Dineng; Shang, Jihong; Li, Shoujun; Cao, Zhenyi; Liang, Yuyang

    2016-07-01

    Based on multi-beam echo soundings and high-resolution single-channel seismic profiles, linear sand ridges in U14 and U2 on the East China Sea (ECS) shelf are identified and compared in detail. Linear sand ridges in U14 are buried sand ridges, which are 90 m below the seafloor. It is presumed that these buried sand ridges belong to the transgressive systems tract (TST) formed 320-200 ka ago and that their top interface is the maximal flooding surface (MFS). Linear sand ridges in U2 are regressive sand ridges. It is presumed that these buried sand ridges belong to the TST of the last glacial maximum (LGM) and that their top interface is the MFS of the LGM. Four sub-stage sand ridges of U2 are discerned from the high-resolution single-channel seismic profile and four strikes of regressive sand ridges are distinguished from the submarine topographic map based on the multi-beam echo soundings. These multi-stage and multi-strike linear sand ridges are the response of, and evidence for, the evolution of submarine topography with respect to sea-level fluctuations since the LGM. Although the difference in the age of formation between U14 and U2 is 200 ka and their sequences are 90 m apart, the general strikes of the sand ridges are similar. This indicates that the basic configuration of tidal waves on the ECS shelf has been stable for the last 200 ka. A basic evolutionary model of the strata of the ECS shelf is proposed, in which sea-level change is the controlling factor. During the sea-level change of about 100 ka, five to six strata are developed and the sand ridges develop in the TST. A similar story of the evolution of paleo-topography on the ECS shelf has been repeated during the last 300 ka.

  19. Comparison of buried sand ridges and regressive sand ridges on the outer shelf of the East China Sea

    Science.gov (United States)

    Wu, Ziyin; Jin, Xianglong; Zhou, Jieqiong; Zhao, Dineng; Shang, Jihong; Li, Shoujun; Cao, Zhenyi; Liang, Yuyang

    2017-06-01

    Based on multi-beam echo soundings and high-resolution single-channel seismic profiles, linear sand ridges in U14 and U2 on the East China Sea (ECS) shelf are identified and compared in detail. Linear sand ridges in U14 are buried sand ridges, which are 90 m below the seafloor. It is presumed that these buried sand ridges belong to the transgressive systems tract (TST) formed 320-200 ka ago and that their top interface is the maximal flooding surface (MFS). Linear sand ridges in U2 are regressive sand ridges. It is presumed that these buried sand ridges belong to the TST of the last glacial maximum (LGM) and that their top interface is the MFS of the LGM. Four sub-stage sand ridges of U2 are discerned from the high-resolution single-channel seismic profile and four strikes of regressive sand ridges are distinguished from the submarine topographic map based on the multi-beam echo soundings. These multi-stage and multi-strike linear sand ridges are the response of, and evidence for, the evolution of submarine topography with respect to sea-level fluctuations since the LGM. Although the difference in the age of formation between U14 and U2 is 200 ka and their sequences are 90 m apart, the general strikes of the sand ridges are similar. This indicates that the basic configuration of tidal waves on the ECS shelf has been stable for the last 200 ka. A basic evolutionary model of the strata of the ECS shelf is proposed, in which sea-level change is the controlling factor. During the sea-level change of about 100 ka, five to six strata are developed and the sand ridges develop in the TST. A similar story of the evolution of paleo-topography on the ECS shelf has been repeated during the last 300 ka.

  20. Distribution of sand dunes and sand shifts along the southern fringe of the Mu Us Desert since the Ming Dynasty

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This article takes the two segments of the Ming Great Walls, Dabian and Erbian, and their associated barracks and forts as geographical references. Based on a detailed scrutiny of historical records of the Ming and Qing dynasties, and on field surveys, the southern boundaries of the sand dunes and sand shifts of the Mu Us Desert in the Ming and Qing dynasties are carefully reconstructed. A comparison of the southern boundaries of the sand dunes and sand shifts of the Mu Us Desert in Ming and Qing with the modern boundary revealed in remote sensing imagery clearly shows that the southern boundary of dunes and shifts in the Mu us Desert has expanded only in a few areas and on a small scale. In the area to the south of Changle Fort, along the direction of annually prevailing winds, sand drifts have penetrated through the Jialu River valley into the loess region and have formed a sand strip of 32 km long and 3 km wide. To the east of Qingping Fort, sand drifts penetrated toward the eastern loess region through the Luhe River valley and have formed another sand strip of 8 km long and 2 km wide. Generally speaking, though the intensity of human activity has been increasing in this area since the Ming Dynasty, the Mu Us Desert has not significantly expanded toward the southeast or southwest. The sand-loess boundary in the southern fringe of the Mu Us Desert has been almost unchanged since the Ming Dynasty.

  1. Faecal indicator bacteria enumeration in beach sand: A comparison study of extraction methods in medium to coarse sands

    Science.gov (United States)

    Boehm, A.B.; Griffith, J.; McGee, C.; Edge, T.A.; Solo-Gabriele, H. M.; Whitman, R.; Cao, Y.; Getrich, M.; Jay, J.A.; Ferguson, D.; Goodwin, K.D.; Lee, C.M.; Madison, M.; Weisberg, S.B.

    2009-01-01

    Aims: The absence of standardized methods for quantifying faecal indicator bacteria (FIB) in sand hinders comparison of results across studies. The purpose of the study was to compare methods for extraction of faecal bacteria from sands and recommend a standardized extraction technique. Methods and Results: Twenty-two methods of extracting enterococci and Escherichia coli from sand were evaluated, including multiple permutations of hand shaking, mechanical shaking, blending, sonication, number of rinses, settling time, eluant-to-sand ratio, eluant composition, prefiltration and type of decantation. Tests were performed on sands from California, Florida and Lake Michigan. Most extraction parameters did not significantly affect bacterial enumeration. anova revealed significant effects of eluant composition and blending; with both sodium metaphosphate buffer and blending producing reduced counts. Conclusions: The simplest extraction method that produced the highest FIB recoveries consisted of 2 min of hand shaking in phosphate-buffered saline or deionized water, a 30-s settling time, one-rinse step and a 10 : 1 eluant volume to sand weight ratio. This result was consistent across the sand compositions tested in this study but could vary for other sand types. Significance and Impact of the Study: Method standardization will improve the understanding of how sands affect surface water quality. ?? 2009 The Society for Applied Microbiology.

  2. Economic and environmental effects of the FQD on crude oil production from tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Kampman, B.; De Buck, A.; Afman, M. [CE Delft, Delft (Netherlands); Van den Berg, J.; Otten, G.J. [Carbon Matters, Den Haag (Netherlands)

    2013-05-15

    The production of unconventional crudes in Canada and Venezuela and exports of these crudes to the EU are investigated. In addition the potential economic and environmental impact of the proposed EU FQD measures (Fuel Quality Directive) on the production of crudes from tar sands and on new tar sand exploration projects are examined. CE Delft has analysed the impact by using a dedicated cost model. For existing projects, the model determines the effect on the basis of marginal production costs. For planned projects the model used the net present value (NPV) of proposed investments. The impacts were determined for a range of crude oil prices and FQD price effects. Combined, for existing and new projects together, the maximum effect would be at a price level at 60 USD/bbl, with savings of up to 19 Mt CO2/y at an FQD price differential of 3 euro/bbl. This overall effect would be substantial and come on top of the total emission reduction effect of the FQD of 60 Mt CO2/y, which will be achieved mostly by the blending of low-carbon fuels and reduced flaring and venting. As part of the reduction of transport greenhouse gas (GHG) emissions, the revised FQD obliges fuel suppliers to reduce these emissions by 6% by 2020 on a well-to-wheel basis. The EU is currently developing a methodology to differentiate fossil fuels on the basis of feedstock and GHG emissions. In the proposal, diesel produced from tar sands, has been given a default emission value of 108.5 gCO2 eq/MJ, while diesel from conventional crude was set at 89.1 gCO2 eq/MJ. The Commission's proposal is currently undergoing an impact assessment and is expected to be resubmitted to the Council later this year (2013)

  3. Constraining Microbial Community Response During Oil Sands Reclamation via Lipid and Isotope Biosignatures

    Science.gov (United States)

    Bradford, L. M.; Ziolkowski, L. A.; Ngonadi, N.; Warren, L. A.; Slater, G. F.

    2013-12-01

    A pilot scale reclamation project in the Athabasca oil sands region (Fort McMurray, Alberta, Canada) has created an artificial freshwater fen typical of the boreal forest region in which the oil sands occur. At this site, composite tailings (CT) residue was overlain with a thick sand cap and a freshwater fen constructed on top. This project began in 2009, with most wetland development occurring over the summer of 2012. It is recognized that the response of microbial communities to reclamation activities has the potential to play a significant role in the outcome of reclamation. Microbial biodegradation of petroleum residues may improve reclamation outcomes, while production of by-products, particularly hydrogen sulphide gas (H2S) via bacterial sulphate reduction, must be assessed to manage any potential negative impacts. Phospholipid fatty acid (PLFA) concentration and isotopic analysis were used to characterize the response of in situ microbial communities within the reclamation fen system. Increases in PLFA concentrations were observed in sediment taken from the sand layer at sample sites within the fen from during its establishment. Initial values equivalent to circa 106 cells/gram in July 2011 increased to values equivalent to 107cells/gram in August 2012 and then to 108 cells/gram in November 2012. Analysis of the radiocarbon (Δ14C) content of total organic carbon shows an increase in Δ14C from highly depleted values (-983×2‰) in July 2011, consistent with petroleum hydrocarbons dominating the total organic carbon, to more 14C enriched values as fen development progressed (-423×2.1‰ in August 2012 and -417×1.4‰ in November 2012). This indicates inputs of more modern organic matter potentially associated with the peat used to construct the fen and/or inputs from recent photosynthesis. The correlation between the observed PLFA increases and this increase in modern carbon inputs suggests that reclamation activities have stimulated the increase in the

  4. Properties of Desert Sand and CMAS Glass

    Science.gov (United States)

    Bansal, Narottam P.; Choi, Sung R.

    2014-01-01

    As-received desert sand from a Middle East country has been characterized for its phase composition and thermal stability. X-ray diffraction analysis showed the presence of quartz (SiO2), calcite (CaCO3), gypsum (CaSO4.2H2O), and NaAlSi3O8 phases in as-received desert sand and showed weight loss of approx. 35 percent due to decomposition of CaCO3 and CaSO4.2H2O when heated to 1400 C. A batch of as-received desert sand was melted into calcium magnesium aluminosilicate (CMAS) glass at approx. 1500 C. From inductively coupled plasma-atomic emission spectrometry, chemical composition of the CMAS glass was analyzed to be 27.8CaO-4MgO-5Al2O3-61.6SiO2-0.6Fe2O3-1K2O (mole percent). Various physical, thermal and mechanical properties of the glass have been evaluated. Bulk density of CMAS glass was 2.69 g/cc, Young's modulus 92 GPa, Shear modulus 36 GPa, Poisson's ratio 0.28, dilatometric glass transition temperature (T (sub g)) 706 C, softening point (T (sub d)) 764 C, Vickers microhardness 6.3 +/- 0.4 GPa, indentation fracture toughness 0.75 +/- 0.15 MPa.m (sup 1/2), and coefficient of thermal expansion (CTE) 9.8 x 10 (exp -6)/degC in the temperature range 25 to 700 C. Temperature dependence of viscosity has also been estimated from various reference points of the CMAS glass using the Vogel-Fulcher-Tamman (VFT) equation. The glass remained amorphous after heat treating at 850 C for 10 hr but crystallized into CaSiO3 and Ca-Mg-Al silicate phases at 900 C or higher temperatures. Crystallization kinetics of the CMAS glass has also been investigated by differential thermal analysis (DTA). Activation energies for the crystallization of two different phases in the glass were calculated to be 403 and 483 kJ/mol, respectively.

  5. Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands Products: Implications for U.S. Petroleum Fuels.

    Science.gov (United States)

    Cai, Hao; Brandt, Adam R; Yeh, Sonia; Englander, Jacob G; Han, Jeongwoo; Elgowainy, Amgad; Wang, Michael Q

    2015-07-07

    Greenhouse gas (GHG) regulations affecting U.S. transportation fuels require holistic examination of the life-cycle emissions of U.S. petroleum feedstocks. With an expanded system boundary that included land disturbance-induced GHG emissions, we estimated well-to-wheels (WTW) GHG emissions of U.S. production of gasoline and diesel sourced from Canadian oil sands. Our analysis was based on detailed characterization of the energy intensities of 27 oil sands projects, representing industrial practices and technological advances since 2008. Four major oil sands production pathways were examined, including bitumen and synthetic crude oil (SCO) from both surface mining and in situ projects. Pathway-average GHG emissions from oil sands extraction, separation, and upgrading ranged from ∼6.1 to ∼27.3 g CO2 equivalents per megajoule (in lower heating value, CO2e/MJ). This range can be compared to ∼4.4 g CO2e/MJ for U.S. conventional crude oil recovery. Depending on the extraction technology and product type output of oil sands projects, the WTW GHG emissions for gasoline and diesel produced from bitumen and SCO in U.S. refineries were in the range of 100-115 and 99-117 g CO2e/MJ, respectively, representing, on average, about 18% and 21% higher emissions than those derived from U.S. conventional crudes. WTW GHG emissions of gasoline and diesel derived from diluted bitumen ranged from 97 to 103 and 96 to 104 g CO2e/MJ, respectively, showing the effect of diluent use on fuel emissions.

  6. Compensation Grouting in Sand: Experiments, Field Experiences and Mechanisms

    NARCIS (Netherlands)

    Bezuijen, A.

    2010-01-01

    This thesis reports on experimental research on compensation grouting in sand. It is investigated in model tests, how the shape of the grout bodies made during injection depends on the grout properties, the density of the sand and the way the tubes are installed. The shape of the grout body affects

  7. Test Setup for Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina

    The test setup for testing axially static and cyclic loaded piles in sand is described in the following. The purpose for the tests is to examine the tensile capacity of axially loaded piles in dense fully saturated sand. The pile dimensions are chosen to resemble full scale dimension of piles used...... in offshore pile foundations today....

  8. Efficient modelling of sand wave behaviour [Powerpoint Presentation

    NARCIS (Netherlands)

    Berg, van den Joris; Damme, van Ruud

    2004-01-01

    Sand waves form a pattern of more or less parallel ridges. The wave length is about 300 meters and the height up to 10 meters, which is a considerable amount of the total water depth. Sand waves migrate with speeds of about 10 meters per year. Information on their behaviour is valuable: the larger p

  9. Microwaves energy in curing process of water glass molding sands

    Directory of Open Access Journals (Sweden)

    Granat K.

    2007-01-01

    Full Text Available This work presents the results of investigation of microwave heating on hardening process of water glass molding sands. Essential influence of this heating process on basic properties such as: compression, bending and tensile strength as well as permeability and abrasion resistance has been found. It has been proved, that all investigated sorts of sodium water glass with a module between 2.0 and 3.3 can be used as a binder of molding sands in microwave curing process. It has been found during analysis of research results of sands with 2.5 % water glass addition that they are practically the same as in case of identical molding sands dried for 120 minutes at the temperature of 110°C, used for comparative purposes. Application of microwave curing of molding sands with water glass, however, guarantees reduction of hardening time (from 120 to 4 minutes as well as significant reduction of energy consumption. Attempts of two stage hardening of the investigated water glass molding sands have also been carried out, that is after an initial hardening during a classical CO2 process (identical sands have also been tested for comparison after CO2 blowing process and additional microwave heating. It has been found that application of this kind of treatment for curing sands with 2.5 % sodium water glass content and module from 2.0 up to 3.3 results in the improvement of properties in comparison to classical CO2 process.

  10. OPTIMIZATION OF GRANULOMETRIC COMPOSITION OF DRY FRIABLE SAND BLENDS

    Directory of Open Access Journals (Sweden)

    V. S. Doroshenko

    2014-01-01

    Full Text Available A method for optimizing the composition of the grain loose sand mixtures by placing the binder particles into the pores of the frame sand compaction of these mixtures. An example of calculation of grain composition of such a mixture.

  11. Sand transport in oscillatory sheet-flow; a literature review

    NARCIS (Netherlands)

    Janssen, C.M.

    1995-01-01

    This literature review is part of the ongoing research on sand transport in oscillatory sheet-flow, as taking place at the coast during storms. Because sheet-flow corresponds to conditions of high shear stress, large amounts of sand are transported. Therefore it is an important part of the total san

  12. The extraction of bitumen from western tar sands. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1990-07-01

    Topics discussed include: characterization of bitumen impregnated sandstone, water based tar sand separation technology, electrophoretic characterization of bitumen and fine mineral particles, bitumen and tar sand slurry viscosity, the hot water digestion-flotation process, electric field use on breaking water-in-oil emulsions, upgrading of bitumens and bitumen-derived liquids, solvent extraction.

  13. The extraction of bitumen from western tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1990-07-01

    Topics discussed include: characterization of bitumen impregnated sandstone, water based tar sand separation technology, electrophoretic characterization of bitumen and fine mineral particles, bitumen and tar sand slurry viscosity, the hot water digestion-flotation process, electric field use on breaking water-in-oil emulsions, upgrading of bitumens and bitumen-derived liquids, solvent extraction.

  14. The stable stiffness triangle - drained sand during deformation cycles

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2017-01-01

    Cyclic, drained sand stiffness was observed using the Danish triaxial appa- ratus. New, deformation dependant soil property (the stable stiffness triangle) was detected. Using the the stable stiffness triangle, secant stiffness of drained sand was plausible to predict (and control) even during ir...

  15. Modeling sheet-flow sand transport under progressive surface waves

    NARCIS (Netherlands)

    Kranenburg, W.M.

    2013-01-01

    In the near-shore zone, energetic sea waves generate sheet-flow sand transport. In present day coastal models, wave-induced sheet-flow sand transport rates are usually predicted with semi-empirical transport formulas, based on extensive research on this phenomenon in oscillatory flow tunnels. Howeve

  16. Stress Wave Propagation in Unsaturated Sands. Volume 1. Centrifuge Modeling

    Science.gov (United States)

    1993-04-01

    122 xii LIST OF TABLES 2.1 Soil properties from explosive testing in sand by Drake and Little (1983...Ottawa, Illinois (ASTM C190). A summary of the physical properties of both Tyndall and Ottawa sands is given in Tablas 3.3a and 3.3b. Grain size

  17. Pathogen removal using saturated sand colums supplemented with hydrochar

    NARCIS (Netherlands)

    Chung, J.W.

    2015-01-01

    This PhD study has evaluated hydrochars derived from biowastes as adsorbents for pathogen removal in water treatment. Pathogen removal experiments were conducted by carrying out breakthrough analysis using a simple sand filtration set-up. Glass columns packed by 10 cm sand bed supplemented with mino

  18. Sand transport processes in the surf and swash zones

    NARCIS (Netherlands)

    Zanden, van der Joep

    2016-01-01

    Long-term predictions of beach morphology using numerical models contribute to cost-effective coastal protection strategies. The physics of sand transport in the wave breaking region and the swash zone are not fully understood, leading to poor predictive capability of existing sand transport models

  19. Acetylcholinesterase mutations and organophosphate resistance in sand flies and mosquitoes

    Science.gov (United States)

    The sand fly, Phlebotomus papatasi (Scopoli) is a major vector of Leishamnia major, the principle causative agent of human cutaneous leishmaniasis in the Middle East, southern Europe, northern Africa, and Southern Asia. Sand fly bites and leishmaniasis significantly impacted U.S. military operations...

  20. Providing floating capabilities in latest-generation sand screens

    Energy Technology Data Exchange (ETDEWEB)

    Bowen, E.G.; Coronado, M.P. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Baker Hughes, Houston, TX (United States)

    2008-10-15

    Alternative production methods are needed for the massive reserves located in the bitumen region of Canada's tar sands. The area has over 100 installations of sand screens/slotted liners in both injection and production legs using steam-assisted gravity drainage (SAGD) technology. Multiple wells must be drilled from a single pad because of the sensitive nature of the environment. With significant depths of these wells, a floating sand screen provides assurance that the sand screen will reach the desired depth. Paraffin is generally used to plug the flow access of the screen during installation. This paper discussed a new technology that has been developed to allow for sand screen installations without relying on paraffin wax to withstand differential pressure. The new technology uses a hydro-mechanical valving system incorporated into the screen design to temporarily close off the screen while being run in the hole. The paper described how the technology could provide a reliable, time-saving solution for SAGD installations when floating sand control screens are needed. The paper discussed current technology and its limitations, sand screen installation, screen design for floating applications, and additional applications. It was concluded that this technology solution provides a unique alternative to the methods currently used to install sand screens with SAGD technology in the fast growing Canadian market for bitumen recovery. 2 refs., 5 figs.

  1. Fine sand in motion: the influence of interstitial air

    NARCIS (Netherlands)

    Homan, T.A.M.

    2013-01-01

    Sand is a granular material, and therefore it consists of individual grains arranged in a packing. The pores in-between the grains are usually filled with a fluid, in this case air. Now, is this interstitial air able to influence the behavior of the sand bed as a whole? When a ball impacts on fine,

  2. Environmental impact assessment in the Alberta oil sands area

    Energy Technology Data Exchange (ETDEWEB)

    Mackenzie, I.B.; Herasymuik, G.; Schmidt, N.; Kovats, Z.; Clipperton, K. [Golder Associates Ltd., Calgary, AB (Canada)

    2004-07-01

    Some of the activities associated with the Environmental Impact Assessment (EIA) process in oil sands operations in Alberta were reviewed with particular reference to key regional issues such as instream flow needs (IFN), basal water management, lake acidification potential, and climate change. The proven approaches to maintain timelines and maximize success were also discussed with reference to the factors that can be managed to promote an efficient application, review and approval process. It was noted that although the EIA process is well-defined and robust, it is evolving due to new challenges such as increasingly complex tools and new regulations. Alberta's Cumulative Environmental Management Association (CEMA) continuously refines environmental objectives for NOx, SOx, surface water, and the Muskeg River and the Athabasca River watersheds. In particular, much effort has gone into determining the water withdrawals from the Athabasca River during the winter months and its effect on resident fish populations. Operators must determine the viability of a project if studies of IFN indicate that there is limited river flow available for abstraction. This paper identified several factors that can be addressed to keep the process on schedule. These include planning, understanding issues, completing baseline surveys, and commanding the attention of regulators. 12 refs., 1 tab., 8 figs.

  3. Crater formation during raindrop impact on sand

    Science.gov (United States)

    de Jong, Rianne; Zhao, Song-Chuan; van der Meer, Devaraj

    2017-04-01

    After a raindrop impacts on a granular bed, a crater is formed as both drop and target deform. After an initial, transient, phase in which the maximum crater depth is reached, the crater broadens outwards until a final steady shape is attained. By varying the impact velocity of the drop and the packing density of the bed, we find that avalanches of grains are important in the second phase and hence affect the final crater shape. In a previous paper, we introduced an estimate of the impact energy going solely into sand deformation and here we show that both the transient and final crater diameter collapse with this quantity for various packing densities. The aspect ratio of the transient crater is however altered by changes in the packing fraction.

  4. Direct Production of Silicones From Sand

    Energy Technology Data Exchange (ETDEWEB)

    Larry N. Lewis; F.J. Schattenmann: J.P. Lemmon

    2001-09-30

    Silicon, in the form of silica and silicates, is the second most abundant element in the earth's crust. However the synthesis of silicones (scheme 1) and almost all organosilicon chemistry is only accessible through elemental silicon. Silicon dioxide (sand or quartz) is converted to chemical-grade elemental silicon in an energy intensive reduction process, a result of the exceptional thermodynamic stability of silica. Then, the silicon is reacted with methyl chloride to give a mixture of methylchlorosilanes catalyzed by cooper containing a variety of tract metals such as tin, zinc etc. The so-called direct process was first discovered at GE in 1940. The methylchlorosilanes are distilled to purify and separate the major reaction components, the most important of which is dimethyldichlorosilane. Polymerization of dimethyldichlorosilane by controlled hydrolysis results in the formation of silicone polymers. Worldwide, the silicones industry produces about 1.3 billion pounds of the basic silicon polymer, polydimethylsiloxane.

  5. Transport velocities of coal and sand particles

    Energy Technology Data Exchange (ETDEWEB)

    Adanez, J. (Inst. de Carboquimica, Zaragoza (Spain)); Diego, L.F. de (Inst. de Carboquimica, Zaragoza (Spain)); Gayan, P. (Inst. de Carboquimica, Zaragoza (Spain))

    1993-10-01

    Transport velocities of narrow cut sizes of coarse particles of sand and coal were determined at room temperature and atmospheric pressure. These velocities were obtained by four different methods previously utilized by other authors with fine particles. The four methods tested gave good predictions of the transport velocities. The method based on the measurement of the time required for all the solids to leave the bed without feeding in any fresh solid is specially interesting because of its rapidity and simplicity. The determined transport velocities were strongly dependent on the solid particle size and density. The experimental values were fitted to an equation which fitted both the experimental results obtained in this work and other published results obtained with fine particles. (orig.)

  6. The state of oil sands wetland reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Foote, L. [Alberta Univ., Edmonton, AB (Canada)

    2010-07-01

    The state of oil sand and wetlands reclamation was the subject of this presentation. Wildlife habitat and response, plant community and production, and microbial biology were examples of research areas surrounding this body of knowledge. Hydrological research and landscape ecology were discussed along with peatlands and marshes such as the Corvette and the Kia. A few examples of what has been learned in the area of wetlands reclamation was presented. Other topics were also discussed, such as timeframes, pragmatic policy approaches, reclamation costs, research needs and some ideas on maturing the field. It was concluded that environmental conditions change with time and area because of time, chemistry, physics, stoichiometry, as well as biotic mediation and facilitation. figs.

  7. SAND: Automated VLBI imaging and analyzing pipeline

    Science.gov (United States)

    Zhang, Ming

    2016-05-01

    The Search And Non-Destroy (SAND) is a VLBI data reduction pipeline composed of a set of Python programs based on the AIPS interface provided by ObitTalk. It is designed for the massive data reduction of multi-epoch VLBI monitoring research. It can automatically investigate calibrated visibility data, search all the radio emissions above a given noise floor and do the model fitting either on the CLEANed image or directly on the uv data. It then digests the model-fitting results, intelligently identifies the multi-epoch jet component correspondence, and recognizes the linear or non-linear proper motion patterns. The outputs including CLEANed image catalogue with polarization maps, animation cube, proper motion fitting and core light curves. For uncalibrated data, a user can easily add inline modules to do the calibration and self-calibration in a batch for a specific array.

  8. Thermal aspects of temperature transformations in silica sand

    Directory of Open Access Journals (Sweden)

    J.St. Kowalski

    2010-07-01

    Full Text Available Problems related with the choice of moulding sand composition considering its behaviour in contact with molten metal were discussed.The investigations of high-temperature phenomena enable moulding sand composition to be evaluated in terms of its applicability underthe specific conditions of a foundry shop. It is also possible to eliminate the casting defects related to moulding sand and its properties. The investigations were carried out on selected moulding sands from the family of the traditional carbon-free moulding mixtures. The effect of moulding sand composition and moisture content on the linear dilatation and stress formation caused by an allotropic quartz transformation was determined. The investigated phenomena were analysed on 3D diagrams plotted from the test data. A strong effect of the beta quartz - alpha quartz transformation at a temperature of about 6000C was stated.

  9. Properties of sodium silicate bonded sand hardened by microwave heating

    Institute of Scientific and Technical Information of China (English)

    Wang Jina; Fan Zitian; Zan Xiaolei; Pan Di

    2009-01-01

    The sodium silicate bonded sand hardened by microwave heating has many advantages,such as low sodium silicate adding quantity,fast hardening speed,high room temperature strength,good collapsibility and certain surface stability. However,it has big moisture absorbability in the air,which would lead to the compression strength and the surface stability of the sand molds being sharply reduced. In this study,the moisture absorbability of the sodium silicate bonded sand hardened by microwave heating in different humidity conditions and the effect factors were investigated. Meanwhile,the reasons for the big moisture absorbability of the sand were analyzed.Some measures to overcome the problems of high moisture absorbability,bad surface stability and sharply reducing strength in the air were discussed. The results of this study establish the foundation of green and clean foundry technology based on the microwave heating hardening sodium silicate sand process.

  10. A New Type of Exposed Oil Sand Mine

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    With several means of analysis, the unique organic compound component and distribution of exposed oil sand existing in Qinghai, north-west China, is revealed. Qinghhai oil sand has great content of light components with high saturated hydrocarbon content up to approximately 50%, while its heavy components of colloid and asphaltene is rather low (<38%); straight-chain alkane has a regular distribution concentrating mainly around C28; it has a very high atom ratio of H/C. The physical parameters of the oil sand mine are within the range of common heavy oils. Such chemical composition and distribution obviously differs from that of other known exposed oil sand mines. This particular property of the oil sand is formed due to the unique geographical and geological environment. Therefore, it is intended to exploit the mine with a new combined method, i.e., first drill horizontal wells and then opencut.

  11. Optimization of Blended Mortars Using Steel Slag Sand

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A new kind of mortar made of ground granulated blast-furnace slag (GGBFS), gypsum,clinker and steel slag sand (<4.75 mm) was developed. The ratio of steel slag sand to GGBFS was 1:1 and the amount of gypsum was 4% by weight while the dosage of clinker ranged from 0% to 24%. The optimization formulation of such mortar was studied. The content of steel slag sand should be less than 50% according to the volume stability of blended mortar, and the dosage of clinker is about 10% based on the strength development.Besides strength, the hydration heat, pore structure and micro pattern of blended mortar were also determined.The experimental results show the application of steel slag sand may reduce the dosage of cement clinker and increase the content of industrial waste product such as GGBFS, and the clinker is also a better admixture for blended mortar using steel slag sand.

  12. Sedimentation process of saturated sand under impact loading

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Junfeng; MENG; Xiangyue

    2005-01-01

    The initial small inhomogeneity of saturated sand could be amplified during the sedimentation process after liquefaction, and cracks could be observed in the sand column. Layers of fine sand could also be found at the exact place where cracks developed and disappeared. The phenomena and the whole process were experimentally shown by X-rays images. To account for the phenomena, a linearized stability analysis of the sedimentation of saturated sand was conducted; however, it did not produce a satisfactory result. A three-phase flow model describing the transportation of fine sand is presented in this paper. It is shown that such a kind of erosion/deposition model was qualitatively in good agreement with the experimental observation.

  13. Compressive Strength of Compacted Clay-Sand Mixes

    Directory of Open Access Journals (Sweden)

    Faseel Suleman Khan

    2014-01-01

    Full Text Available The use of sand to improve the strength of natural clays provides a viable alternative for civil infrastructure construction involving earthwork. The main objective of this note was to investigate the compressive strength of compacted clay-sand mixes. A natural clay of high plasticity was mixed with 20% and 40% sand (SP and their compaction and strength properties were determined. Results indicated that the investigated materials exhibited a brittle behaviour on the dry side of optimum and a ductile behaviour on the wet side of optimum. For each material, the compressive strength increased with an increase in density following a power law function. Conversely, the compressive strength increased with decreasing water content of the material following a similar function. Finally, the compressive strength decreased with an increase in sand content because of increased material heterogeneity and loss of sand grains from the sides during shearing.

  14. The effects of psammophilous plants on sand dune dynamics

    CERN Document Server

    Bel, Golan

    2013-01-01

    Psammophilous plants are special plants that flourish in sand moving environments. There are two main mechanisms by which the wind affects these plants: (i) sand drift exposes roots and covers branches--the exposed roots turn into new plants and the covered branches turn into new roots; both mechanisms result in an enhanced growth rate of the psammophilous plant cover of the dunes; (ii) strong winds, often associated with sand movement, tear branches and seed them in nearby locations, resulting in new plants and an enhanced growth rate of the psammophilous plant cover of the dunes. Despite their important role in dune dynamics, to our knowledge, psammophilous plants have never been incorporated into mathematical models of sand dunes. Here, we attempt to model the effects of these plants on sand dune dynamics. We construct a set of three ordinary differential equations for the fractions of surface cover of regular vegetation, biogenic soil crust and psammophilous plants. The latter reach their optimal growth u...

  15. Recycling of petroleum-contaminated sand.

    Science.gov (United States)

    Taha, R; Ba-Omar, M; Pillay, A E; Roos, G; al-Hamdi, A

    2001-08-01

    The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.

  16. Climatology of yellow sand (Asian sand, Asian dust or Kosa)in East Asia

    Institute of Scientific and Technical Information of China (English)

    Masatoshi; Yoshino

    2002-01-01

    In order to study climatology of yellow sand (Asian sand, Asian dust or Kosa) in EastAsia, secular fluctuation in China, Korea and Japan in the recent 30 years was presented. Thenumber of days with sand-dust storm at five stations in China-Hotan, Zhangye, Minqin, Jurhand Beijing, decreases a lot at the former three stations, but changed little at the latter two stations.Suggesting that the recent global warming is more evident in Xinjiang and Gansu, where the fre-quency of cold air invasions from the higher latitudes is decreasing. But, the eastern parts ofMongolia, inner Mongolia, and North China encounter stronger cyclones in early spring as a resultof global warming. These cyclones bring cold air from higher latitudes, causing severe duststorms. Secular variation in the annual days with sand-dust storms in China and Kosa days in Ko-rea and Japan show a parallel change with higher frequency from 1975 to 1985. This may be re-lated to the higher frequency of La Nina years. However, different tendency was shown in theperiod from 1986 to 1996. Since 1996 or 1997, a sharp increase is clear, which may be caused bythe developed cyclones in East Asia as well as human activities, and stronger land degradationunder La Nina conditions. Anomalies of the total number of stations with Kosa days were dis-cussed in accordance with some synoptic meteorological conditions such as the differences be-tween Siberian anticyclone and Aleutian cyclone center at 500 hPa level during the previous winter.

  17. Broadband Scattering from Sand and Sand/Mud Sediments with Extensive Environmental Characterization

    Science.gov (United States)

    2017-01-30

    frequency sound speed and attenuation measurements in sandy sediments with a portable velocimeter.” (4) Proceedings from the 2nd International...Bay, FL off the shore of Shell Island. The sediment consisted of the 15 cm mud layer overlying a muddy, coarse sand basement. Scattering data was...Demoulin, X., L. Guillon, and B.T. Hefner (2017), “High-frequency sound speed and attenuation measurements in sandy sediments with a portable

  18. Aeolian sand transport and aeolian deposits on Venus: A review

    Science.gov (United States)

    Kreslavsly, Mikhail A.; Bondarenko, Nataliya V.

    2017-06-01

    We review the current state of knowledge about aeolian sand transport and aeolian bedforms on planet Venus. This knowledge is limited by lack of observational data. Among the four planetary bodies of the Solar System with sufficient atmospheres in contact with solid surfaces, Venus has the densest atmosphere; the conditions there are transitional between those for terrestrial subaerial and subaqueous transport. The dense atmosphere causes low saltation threshold and short characteristic saltation length, and short scale length of the incipient dunes. A few lines of evidence indicate that the typical wind speeds exceed the saltation threshold; therefore, sand transport would be pervasive, if sand capable of saltation is available. Sand production on Venus is probably much slower than on the Earth; the major terrestrial sand sinks are also absent, however, lithification of sand through sintering is expected to be effective under Venus' conditions. Active transport is not detectable with the data available. Aeolian bedforms (transverse dunes) resolved in the currently available radar images occupy a tiny area on the planet; however, indirect observations suggest that small-scale unresolved aeolian bedforms are ubiquitous. Aeolian transport is probably limited by sand lithification causing shortage of saltation-capable material. Large impact events likely cause regional short-term spikes in aeolian transport by supplying a large amount of sand-size particles, as well as disintegration and activation of older indurated sand deposits. The data available are insufficient to understand whether the global aeolian sand transport occurs or not. More robust knowledge about aeolian transport on Venus is essential for future scientific exploration of the planet, in particular, for implementation and interpretation of geochemical studies of surface materials. High-resolution orbital radar imaging with local to regional coverage and desirable interferometric capabilities is the

  19. Microbes in Beach Sands: Integrating Environment, Ecology and Public Health.

    Science.gov (United States)

    Whitman, Richard; Harwood, Valerie J; Edge, Thomas A; Nevers, Meredith; Byappanahalli, Muruleedhara; Vijayavel, Kannappan; Brandão, João; Sadowsky, Michael J; Alm, Elizabeth Wheeler; Crowe, Allan; Ferguson, Donna; Ge, Zhongfu; Halliday, Elizabeth; Kinzelman, Julie; Kleinheinz, Greg; Przybyla-Kelly, Kasia; Staley, Christopher; Staley, Zachery; Solo-Gabriele, Helena M

    2014-09-01

    Beach sand is a habitat that supports many microbes, including viruses, bacteria, fungi and protozoa (micropsammon). The apparently inhospitable conditions of beach sand environments belie the thriving communities found there. Physical factors, such as water availability and protection from insolation; biological factors, such as competition, predation, and biofilm formation; and nutrient availability all contribute to the characteristics of the micropsammon. Sand microbial communities include autochthonous species/phylotypes indigenous to the environment. Allochthonous microbes, including fecal indicator bacteria (FIB) and waterborne pathogens, are deposited via waves, runoff, air, or animals. The fate of these microbes ranges from death, to transient persistence and/or replication, to establishment of thriving populations (naturalization) and integration in the autochthonous community. Transport of the micropsammon within the habitat occurs both horizontally across the beach, and vertically from the sand surface and ground water table, as well as at various scales including interstitial flow within sand pores, sediment transport for particle-associated microbes, and the large-scale processes of wave action and terrestrial runoff. The concept of beach sand as a microbial habitat and reservoir of FIB and pathogens has begun to influence our thinking about human health effects associated with sand exposure and recreational water use. A variety of pathogens have been reported from beach sands, and recent epidemiology studies have found some evidence of health risks associated with sand exposure. Persistent or replicating populations of FIB and enteric pathogens have consequences for watershed/beach management strategies and regulatory standards for safe beaches. This review summarizes our understanding of the community structure, ecology, fate, transport, and public health implications of microbes in beach sand. It concludes with recommendations for future work in

  20. A simple morphodynamic model for sand banks and large-scale sand pits subject to asymetrical tides

    NARCIS (Netherlands)

    Roos, P.C.; Hulscher, S.J.M.H.; Peters, B.G.T.M.; Nemeth, A.A.; Ikeda, S.

    2001-01-01

    We extend existing knowledge on theoretical growth characteristics of tidal sand banks by including asymmetrical tides with an M0, M2 and M4-constituent, thus allowing for migration. Furthermore, in the context of the continuously increasing demand on the Dutch sand market, we show that creating a l

  1. Oblique second-order sand transport pathways on an intertidal sand flat in a natural tidal inlet system

    DEFF Research Database (Denmark)

    Ernstsen, Verner Brandbyge; Lefebvre, Alice; Kroon, Aart

    2013-01-01

    . This indicates distinct second-order sand transport pathways oblique to the main tidal transport pathways. A conceptual model for the development of the bedforms and channels is presented, which comprises hypotheses of the hydrodynamic forcing of the different second-order sand transport pathways. During flood...

  2. Experimental analysis of sand particles' lift-off and incident velocities in wind-blown sand flux

    Institute of Scientific and Technical Information of China (English)

    Li Xie; Zhibao Dong; Xiaojing Zheng

    2005-01-01

    The probability distributions of sand particles' lift-off and incident velocities in a wind-blown sand flux play very important roles in the simulation of the wind-blown sand movement. In this paper, the vertical and the horizontal speeds of sand particles located at 1.0 mm above a sand-bed in a wind-blown sand flux are observed with the aid of Phase Doppler Anemometry (PDA) in a wind tunnel. Based on the experimental data, the probability distributions of not only the vertical lift-off speed but also the lift-off velocity as well as its horizontal component and the incident velocity as well as its vertical and horizontal components can be obtained by the equal distance histogram method. It is found, according to the results of the χ2-test for these probability distributions, that the probability density functions (pdf's) of the sand particles' lift-off and incident velocities as well as their vertical components are described by the Gamma density function with different peak values and shapes and the downwind incident and lift-off horizontal speeds, respectively, can be described by the lognormal and the Gamma density functions. These pdf's depend on not only the sand particle diameter but also the wind speed.

  3. Comparison of two Satellite Imaging Platforms for Evaluating Sand Dune Migration in the Ubari Sand Sea (Libyan Fazzan)

    Science.gov (United States)

    Els, A.; Merlo, S.; Knight, J.

    2015-04-01

    Sand dunes can change location, form or dimensions depending on wind direction and strength. Sand dune movements can be effectively monitored through the comparison of multi-temporal satellite images. However, not all remote sensing platforms are suitable to study sand dunes. This study compares coarse (Landsat) and fine (Worldview) resolution platforms, specifically focussing on sand dunes within the Ubari Sand Sea (Libya). Sand dune features (crest line, dune ridge basal outlines) were extracted from Landsat and Worldview 2 imagery in order to construct geomorphic maps. These geomorphic maps were then compared using image overlay and differencing, and the Root Mean Squared Error (RMSE) was used to determine if the mapped dune patterns were significantly different. It was found that Landsat is a sufficient data source when studying dune patterns within a regional sand sea, but smaller dunes identified from Worldview data were not capable of being extracted in the data sourced from Landsat. This means that for studies concerned with the dune patterns and movements within sand seas, Landsat is sufficient. But in studies where the specific dynamics of specific dunes are required, a finer resolution is required; platforms such as Worldview are needed in order to gain more detailed insight and to link the past and present day climate and environmental change.

  4. Hydrologic Modeling of the White Sands Dune Field, New Mexico

    Science.gov (United States)

    Bourret, S. M.; Newton, B. T.; Person, M. A.

    2013-12-01

    The shallow groundwater flow system of White Sands dune field, located within the Tularosa Basin of Southern New Mexico, likely stabilizes the base of the largest gypsum dunefield in the world. Water table geometry and elevation play a critical role in controlling dune thickness, spatial extent, and migration rates. The White Sands National Monument (WHSA) is concerned that lowering the water table may lead to increased scour and migration of the dune field, which could be unfavorable to the preservation of the flora and fauna that have adapted to survive there. In response to projected increases in groundwater pumping in the regional Tularosa Basin groundwater system, changes in surface water use, and the threat of climate change, the WHSA is interested in understanding how these changes on a regional scale may impact the shallow dune aquifer. We have collected hydrological, geochemical, and geophysical data in order to identify the sources of recharge that contribute to the shallow dune aquifer and to assess interactions between this water table aquifer and the basin-scale, regional system. Vertical head gradients, temperature, and water quality data strongly suggest that local precipitation is the primary source of recharge to the dune aquifer today. This suggests that the modern dune system is relatively isolated from the deeper regional system. However, geochemical and electrical resistivity data indicates that the deeper basin groundwater system does contribute to the shallow system and suggests that hydrologic conditions have changed on geologic time scales. We have constructed a preliminary cross-sectional hydrologic model to attempt to characterize the interaction of the shallow dune aquifer with the deeper basin groundwater. The model cross-section extends about 80 km across the Tularosa Basin in a NW-SE direction parallel to the primary flow path. We represented 6 km of Precambrian crystalline basement, Paleozoic sedimentary rocks as well as Pleistocene

  5. Comparison of polymer applications to treatment of oil sands fine tailings

    Energy Technology Data Exchange (ETDEWEB)

    Li, H.; Zhou, J.; Chow, R. [Alberta Research Council, Edmonton, AB (Canada)

    2008-07-01

    Oil sands tailings are disposed of into large ponds where the coarse particles settle out, and fine particles settle down very slowly to form a stable suspension called mature fine tailings (MFTs). Many oil sands projects are not meeting tailings management targets. Polymer applications are being designed to create agglomerated particles. This presentation discussed a study that compared 3 types of polymers in solids dewatering processes: (1) polyacrylamide (PAM); a aluminum PAM hybrid (Al-PAM) and a thermal-sensitive poly(N-isopropyl acrylamide (PNIPAM). The aim of the study was to determine the optimal polymeric facilitation. Oil sands tailings from lab flotation tests were used. The effect on the initial settling rate of the tailings using the polymers was studied. Inter-particle forces were also compared, as well as the effects of temperature on polymer transitions in aqueous solutions. The effects of the polymers on silica settling and consolidation were examined. Dewatering performance was also compared. Multi-function polymers (MFP) were used to enhance water recovery from settling, consolidation and filtration. Synergetic-effect polymers (SEP) were used to enhance bitumen and water recovery. Results of the study showed that PAM effectively induced solids flocculation, but flocculants were irregular in shape. Al-PAM induced stronger flocculation of particles with dense spherical flocculants. PNIPAM enhanced dewatering in both settling and consolidation. It was concluded that PNIPAM manipulated inter-particle forces with the help of external stimuli conditions to obtain solids sediment with less volume. tabs., figs.

  6. Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research

    Energy Technology Data Exchange (ETDEWEB)

    Speight, J.G.

    1992-01-01

    Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

  7. Application of the ERICA Integrated Approach to the Drigg coastal sand dunes

    Energy Technology Data Exchange (ETDEWEB)

    Wood, M.D. [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside L69 3GP (United Kingdom)], E-mail: mwood@liv.ac.uk; Marshall, W.A. [Westlakes Scientific Consulting Ltd., Princess Royal Building, Westlakes Science and Technology Park, Moor Row, Cumbria CA24 3LN (United Kingdom); Beresford, N.A. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster, Lancashire LA1 4AP (United Kingdom); Jones, S.R. [Westlakes Scientific Consulting Ltd., Princess Royal Building, Westlakes Science and Technology Park, Moor Row, Cumbria CA24 3LN (United Kingdom); Howard, B.J. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster, Lancashire LA1 4AP (United Kingdom); Copplestone, D. [Environment Agency, P.O. Box 12, Richard Fairclough House, Knutsford Road, Latchford, Warrington, Cheshire WA4 1HG (United Kingdom); Leah, R.T. [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside L69 3GP (United Kingdom)

    2008-09-15

    The EC-funded project 'Environmental Risks from Ionising Contaminants: Assessment and Management' (ERICA) developed an 'Integrated Approach' for assessing the impact of ionising radiation on ecosystems. This paper presents the application of the ERICA Integrated Approach, supported by a software programme (the ERICA Tool) and guidance documentation, to an assessment of the Drigg coastal sand dunes (Cumbria, UK). Targeted sampling provided site-specific data for sand dune biota, including amphibians and reptiles. Radionuclides reported included {sup 90}Sr, {sup 99}Tc, {sup 137}Cs, {sup 238}Pu, {sup 239+240}Pu and {sup 241}Am. Site-specific data were compared to predictions derived using the ERICA Tool. Some under- and over-predictions of biota activity concentrations were identified but can be explained by the specific ecological characteristics and contamination mechanism of the dunes. Overall, the results indicated no significant impact of ionising radiation on the sand dune biota and the Integrated Approach was found to be a flexible and effective means of conducting a radiation impact assessment.

  8. Application of forward osmosis membrane technology for oil sands process-affected water desalination.

    Science.gov (United States)

    Jiang, Yaxin; Liang, Jiaming; Liu, Yang

    2016-01-01

    The extraction process used to obtain bitumen from the oil sands produces large volumes of oil sands process-affected water (OSPW). As a newly emerging desalination technology, forward osmosis (FO) has shown great promise in saving electrical power requirements, increasing water recovery, and minimizing brine discharge. With the support of this funding, a FO system was constructed using a cellulose triacetate FO membrane to test the feasibility of OSPW desalination and contaminant removal. The FO systems were optimized using different types and concentrations of draw solution. The FO system using 4 M NH4HCO3 as a draw solution achieved 85% water recovery from OSPW, and 80 to 100% contaminant rejection for most metals and ions. A water backwash cleaning method was applied to clean the fouled membrane, and the cleaned membrane achieved 77% water recovery, a performance comparable to that of new FO membranes. This suggests that the membrane fouling was reversible. The FO system developed in this project provides a novel and energy efficient strategy to remediate the tailings waters generated by oil sands bitumen extraction and processing.

  9. Quantitative Methods for Reservoir Characterization and Improved Recovery: Application to Heavy Oil Sands

    Energy Technology Data Exchange (ETDEWEB)

    Castle, James W.; Molz, Fred W.; Bridges, Robert A.; Dinwiddie, Cynthia L.; Lorinovich, Caitlin J.; Lu, Silong

    2003-02-07

    This project involved application of advanced analytical property-distribution methods conditioned to continuous outcrop control for improved reservoir characterization and simulation. The investigation was performed in collaboration with Chevron Production Company U.S.A. as an industrial partner, and incorporates data from the Temblor Formation in Chevron's West Coalinga Field, California. Improved prediction of interwell reservoir heterogeneity was needed to increase productivity and to reduce recovery cost for California's heavy oil sands, which contained approximately 2.3 billion barrels of remaining reserves in the Temblor Formation and in other formations of the San Joaquin Valley.

  10. Project 2010 Project Management

    CERN Document Server

    Happy, Robert

    2010-01-01

    The ideal on-the-job reference guide for project managers who use Microsoft Project 2010. This must-have guide to using Microsoft Project 2010 is written from a real project manager's perspective and is packed with information you can use on the job. The book explores using Project 2010 during phases of project management, reveals best practices, and walks you through project flow from planning through tracking to closure. This valuable book follows the processes defined in the PMBOK Guide, Fourth Edition , and also provides exam prep for Microsoft's MCTS: Project 2010 certification.: Explains

  11. Interaction Between Graphene Oxide Nanoparticles and Quartz Sand.

    Science.gov (United States)

    Sotirelis, Nikolaos P; Chrysikopoulos, Constantinos V

    2015-11-17

    In this study, the influence of pH, ionic strength (IS), and temperature on graphene oxide (GO) nanoparticles attachment onto quartz sand were investigated. Batch experiments were conducted at three controlled temperatures (4, 12, and 25 °C) in solutions with different pH values (pH 4, 7, and 10), and ionic strengths (IS = 1.4, 6.4, and 21.4 mM), under static and dynamic conditions. The surface properties of GO nanoparticles and quartz sand were evaluated by electrophoretic mobility measurements. Derjaguin-Landau-Verwey-Overbeek (DLVO) potential energy profiles were constructed for the experimental conditions, using measured zeta potentials. The experimental results showed that GO nanoparticles were very stable under the experimental conditions. Both temperature and pH did not play a significant role in the attachment of GO nanoparticles onto quartz sand. In contrast, IS was shown to influence attachment. The attachment of GO particles onto quartz sand increased significantly with increasing IS. The experimental data were fitted nicely with a Freundlich isotherm, and the attachment kinetics were satisfactorily described with a pseudo-second-order model, which implies that the quartz sand exhibited substantial surface heterogeneity and that GO retention was governed by chemisorption. Furthermore, thermodynamic analysis revealed that the attachment process was nonspontaneous and endothermic, which may be associated with structural changes of the sand surfaces due to chemisorption. Therefore, secondary minimum interaction may not be the dominant mechanism for GO attachment onto the quartz sand under the experimental conditions.

  12. Investigations on Several Mechanical Problems in Windblown Sand Movement

    Institute of Scientific and Technical Information of China (English)

    Zheng Xiaojing

    2007-01-01

    It is very necessary for the investigation on mechanism of windblown sand movement to understand and find out effective measures of preventing and reducing danger of windblown sands, which also deals with some general characters and hot spots in the scientific forelands, such as multi-scale problems, interactions among multi-physical-fields, randomness and nonlinearity as well as complex systems. In recent years, a series of experiments in wind tunnels and theoretical modeling as well as computer simulation have been undertaken in the research group of environmental mechanics on windblown sand movement in Lanzhou University with the point of mechanical and geography intersecting view. Some original and essential progress has been achieved, which includes that the main regularities of charges on sand particles and the electric field in windblown sand flux and the effect of the electric field on the flux and the microwave propagation are revealed, and the evolution process of windblown sand flux under the mutual couple interactions among several physical fields are predicted as well as the main features of Aeolian sand ripples are simulated.

  13. Investigations on Several Mechanical Problems in Windblown Sand Movement

    Institute of Scientific and Technical Information of China (English)

    Xiaojing Zheng

    2006-01-01

    It is very necessary for investigation on mechanism of windblown sand movement to understand and find out effective measures of preventing and reducing windblown sand. This also deals with some general features and hot spots in the scientific forelands, such as multi-scale problems, interactions among multi-physical-fields, randomness and nonlinearity as well as complex systems. In recent years, a series of experiments in wind tunnels and theoretical modeling as well as computer simulation have been taken by our research group (the Laboratory of Environmental Mechanics on Windblown Sand Movement in Lanzhou University) in a cross-disciplinary (mechanics and geography) viewpoint. Several original and essential studies were explored such as the main regularities of charges on sand particles, the mechanisms of electric field in windblown sand flux, the effects induced by the electric field on the flux, the microwave propagations, the evolution process of windblown sand flux under mutual couple interactions among several physical fields, and the simulation of the main features of Aeolian sand ripples.

  14. Isotropic Compression Behaviour of Fibre Reinforced Cemented Sand

    Directory of Open Access Journals (Sweden)

    Salahuddin

    2013-07-01

    Full Text Available Fibre-reinforced cemented sands have many applications in improving the response of soils. In this paper, an experimental investigation for the analysis of fiber-reinforced cemented sand in the framework of isotropic compression is presented. The experimental investigations were carried out using a high pressure triaxial apparatus having the capacity of 64 MPa of confining pressure. Tests have been conducted on Portaway sand specimens reinforced with randomly oriented discrete polypropylene fibers with different percentages of fiber and cement contents. Results are presented in the form of e-logp` curves as well as SEM (Scanning Electron Microscopy micrographs. The effects of the addition of fibre in sand and cemented sand for different initial void ratios were investigated. The results demonstrate that the influence of fibre is not significant in both cemented and uncemented sand during the isotropic compression stage. Moreover, from the SEM micrographs it could be seen that there is breakage of sand particles and cement bonds. The fiber threads were seen pinched and found rarely broken in the specimen exhumed after isotropic compression.

  15. Analytical and Experimental Studieson Fracture Behaviour of Foundry Sand Concrete

    Directory of Open Access Journals (Sweden)

    Sasikumar.A

    2016-04-01

    Full Text Available Concrete is a widely used as vital material in the construction world. We can do partial substitution of industrial waste such as foundry sand like material in sand. Foundry sand is not only the economical material also improves the properties of the concrete. Foundry sand has emerged as construction material in its own right. This type of concrete normally contains around (30%, 40% by mass of total sand materials. It improves the workability, minimizes cracking due to thermal and drying shrinkage, and enhances durability to reinforcement corrosion, sulphateattack, and alkali-silica expansion. Fracture mechanics is the field of mechanics concerned with the study of the formation of cracks in materials. It uses methods of analytical Solid mechanics to calculate the driving force on a crack and those of experimental Solid mechanics to characterize the material's resistance to fracture. J-integral and critical stress intensity factor is the fracture parameter. The fracture parameters calculated in our study are stress intensity factor, Critical j-integral. Three point bending test is used to find the fracture parameter. The study is carried out on beams of grade M20 with 0%, 30%, & 40% foundry sand. The test is conducted for normal beams and pre-cracked beams of having a notch to depth ratio (A/W of 0.2. This study concludes that the critical j-integral and stress intensity factors increases by comparing the 0%, 30%, 40% foundry sand concrete

  16. Estimation of sand liquefaction based on support vector machines

    Institute of Scientific and Technical Information of China (English)

    苏永华; 马宁; 胡检; 杨小礼

    2008-01-01

    The origin and influence factors of sand liquefaction were analyzed, and the relation between liquefaction and its influence factors was founded. A model based on support vector machines (SVM) was established whose input parameters were selected as following influence factors of sand liquefaction: magnitude (M), the value of SPT, effective pressure of superstratum, the content of clay and the average of grain diameter. Sand was divided into two classes: liquefaction and non-liquefaction, and the class label was treated as output parameter of the model. Then the model was used to estimate sand samples, 20 support vectors and 17 borderline support vectors were gotten, then the parameters were optimized, 14 support vectors and 6 borderline support vectors were gotten, and the prediction precision reaches 100%. In order to verify the generalization of the SVM method, two other practical samples’ data from two cities, Tangshan of Hebei province and Sanshui of Guangdong province, were dealt with by another more intricate model for polytomies, which also considered some influence factors of sand liquefaction as the input parameters and divided sand into four liquefaction grades: serious liquefaction, medium liquefaction, slight liquefaction and non-liquefaction as the output parameters. The simulation results show that the latter model has a very high precision, and using SVM model to estimate sand liquefaction is completely feasible.

  17. Geosynthetic Reinforcement of Sand-Mat Layer above Soft Ground

    Directory of Open Access Journals (Sweden)

    Jong-Beom Park

    2013-11-01

    Full Text Available In order to improve the bearing capacity of soft ground for the purpose of getting trafficability of construction vehicles, the reinforcement of geosynthetics for sand-mat layers on soft ground has often been used. As the strength of the geosynthetics increases, and the sand-mat system becomes stronger, the bearing capacity of sand-mat systems will be increased. The depths of geosynthetics, reinforced in sand-mat layers, were varied with respect to the width of footing. The tensile strengths of geosynthetics were also varied to evaluate the effect of reinforcement on the bearing capacity of soft ground. The dispersion angles, with varying sand-mat thicknesses, were also determined in consideration of the tensile strength of geosynthetics and the depths of reinforcement installations. The bearing capacity ratios, with the variation of footing width and reinforced embedment depth, were determined for the geosynthetics-only, reinforced soft ground, 1-layer sand-mat system and 2-layer sand-mat system against the non-reinforced soft ground. From the test results of various models, a principle that better explains the concept of geosynthetic reinforcement has been found. On the basis of this principle, a new bearing capacity equation for practical use in the design of geosynthetically reinforced soft ground has been proposed by modifying Yamanouchi’s equation.

  18. Geosynthetic Reinforcement of Sand-Mat Layer above Soft Ground.

    Science.gov (United States)

    Park, Jong-Beom; Park, Hyun-Soo; Kim, Daehyeon

    2013-11-19

    In order to improve the bearing capacity of soft ground for the purpose of getting trafficability of construction vehicles, the reinforcement of geosynthetics for sand-mat layers on soft ground has often been used. As the strength of the geosynthetics increases, and the sand-mat system becomes stronger, the bearing capacity of sand-mat systems will be increased. The depths of geosynthetics, reinforced in sand-mat layers, were varied with respect to the width of footing. The tensile strengths of geosynthetics were also varied to evaluate the effect of reinforcement on the bearing capacity of soft ground. The dispersion angles, with varying sand-mat thicknesses, were also determined in consideration of the tensile strength of geosynthetics and the depths of reinforcement installations. The bearing capacity ratios, with the variation of footing width and reinforced embedment depth, were determined for the geosynthetics-only, reinforced soft ground, 1-layer sand-mat system and 2-layer sand-mat system against the non-reinforced soft ground. From the test results of various models, a principle that better explains the concept of geosynthetic reinforcement has been found. On the basis of this principle, a new bearing capacity equation for practical use in the design of geosynthetically reinforced soft ground has been proposed by modifying Yamanouchi's equation.

  19. Evaluation of wettability of binders used in moulding sands

    Directory of Open Access Journals (Sweden)

    Hutera B.

    2007-01-01

    Full Text Available Binders used in moulding sand have the differential properties. One of the main parameters influencing on moulding sand properties is wettability of the sand grain by binding material. In the article some problems concerned with wettability evaluation have been presented and the importance of this parameter for quantity description of process occurring in system: binder- sand grain has been mentioned. The procedure of wetting angle measurement and operation of prototype apparatus for wettability investigation of different binders used in moulding sand have been described, as well as the results of wetting angle measurement for different binders at different conditions. The addition of little amount of proper diluent to binder results in the state of equilibrium reached almost immediately. Such addition can also reduce the value of equilibrium contact angle. The uniform distribution of binder on the surface of the sand grains and reducing of the required mixing time can be obtained. It has also a positive effect on the moulding sand strength.

  20. The technique of sand control with expandable screens

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, P. [Petrochina, Liaohe (China). Liaohe Oilfield Co.

    2009-07-01

    Sand production in heavy oil reservoirs can limit the normal production of oil wells. In this study, expandable screens were used as a sand control mechanism by filtering the sand as it entered the wellbore. The screen systems consists of an expandable outer housing, an expandable base pipe and a filtering layer. The screen expands radially through an expandable cone and presses into the casing well. Axial tension is used to shrink the screens radially through a fishing anchor in order to remove them from the well. The lack of a sand ring between the screen and the casing increases the flow area of the oil and reduces flow resistance caused by fine silt blockages. A series of laboratory experiments were conducted to study the expansion and shrinkage properties of the screens. A field test conducted at a well located in the Liaohe oilfield in China demonstrated that good sand control results can be obtained without the need for pump checking. It was concluded that the sand control method is easy to use and provides good sand control results in large open flow areas. 2 refs., 2 tabs., 3 figs.

  1. Dynamic response of dry and water-saturated sand systems

    Science.gov (United States)

    LaJeunesse, J. W.; Hankin, M.; Kennedy, G. B.; Spaulding, D. K.; Schumaker, M. G.; Neel, C. H.; Borg, J. P.; Stewart, S. T.; Thadhani, N. N.

    2017-07-01

    The effect of grain size and moisture content on the dynamic macroscopic response of granular geological materials was explored by performing uniaxial planar impact experiments on high purity, Oklahoma #1, sand samples composed of either fine (75-150 μm) or coarse (425-500 μm) grain sizes in either dry or fully water-saturated conditions. Oklahoma #1 sand was chosen for its smooth, quasi-spherical grain shapes, narrow grain size distributions, and nearly pure SiO2 composition (99.8 wt. %). The water-saturated samples were completely saturated ensuring a two-phase mixture with roughly 65% sand and 35% water. Sand samples were dynamically loaded to pressures between 1 and 11 GPa. Three-dimensional meso-scale simulations using an Eulerian hydrocode, CTH, were created to model the response of each sand sample. Multi-phase equations of state were used for both silicon dioxide, which comprised individual sand grains, and water, which surrounded individual grains. Particle velocity profiles measured from the rear surface of the sand, both experimentally and computationally, reveal that fine grain samples have steeper rise characteristics than coarse grain samples and water-saturated samples have an overall much stiffer response than dry samples. The experimentally determined particle velocity vs. shock velocity response of dry sand was linear over this pressure range, with little difference between the two grain sizes investigated. The experimental response for the water saturated sand exhibited a piecewise continuous response with a transition region between particle velocities of 0.6 km s-1 and 0.8 km s-1 and a pressure of 4.5-6 GPa. Hypotheses for the cause of this transition region are drawn based on results of the meso-scale simulations.

  2. Research and practice of the impulse sand fracturing technology

    Directory of Open Access Journals (Sweden)

    Bin Qian

    2015-10-01

    Full Text Available With the deep development of tight sand gas reservoirs, problems such as short stable production period and quick production decline of gas wells after fracturing have become increasingly prominent. Consequently, there is an increasing demand for the effective penetration and conductivity of artificial fractures. Impulse sand fracturing technology introduces a concept of discrete multilayer sanding inside fractures; joint application of pulse blender which can be switched at high frequency, intensive multi-cluster perforation and special fibrous material made it possible to ensure the flow stability of proppant slug, and placement of nonuniformly-laid sand pinnacles and grooves, which markedly upgraded the capacity of the fracture conductivity to several orders of magnitude more than the conventional method. Laboratory engineering simulation evaluation and field test show that pre-fracturing reservoir evaluation, pulse time design and the optimization of degradable fiber and support equipment are the keys to the success of impulse sand fracturing. Compared with the conventional fracturing, this technique can effectively increase well production, decrease the volume of fracturing proppant, and lower sand plugging risks. An independent sand fracturing pilot test has been conducted in 6 layers of 3 wells for the first time in Block Tao 7 of the Sulige Gasfield, Ordos Basin, as a result, the average volume of fracturing proppant dropped by 28.3%, the average sand intensity dropped by 21.88%, and the post-fracturing average daily gas output increased by 26.8%. This technology provides an efficient and environmentally friendly reservoir stimulation option for tight sand gas reservoirs in China.

  3. Dielectric properties of oil sands at 2.45 GHz with TE1,0,11 mode determined by a rectangular cavity resonator.

    Science.gov (United States)

    Erdogan, Levent; Akyel, Cevdet; Ghannouchi, Fadhel M

    2011-01-01

    Oil obtained from oil sands resources constitute an important portion of the oil industry in Canada. Extraction of the bitumen from oil sands is very crucial process because of its cost and environmental impact. Microwave energy applicators by heating oil sands at microwave frequencies can be an excellent alternative to extract bitumen with the advantages of being potentially cost-effective and environmentally friendly method of extraction. In order to design and manufacture a microwave energy applicator, its dielectric properties must be known. In this study, as the first part of our ultimate microwave energy applicator project, in advance, the complex permittivity of oil sands was measured by using rectangular cavity resonator, designed and fabricated in Ecole Polytechnique de Montréal laboratories, at 2.45 GHz with TE1,0,1 mode. The accuracy of the permittivity measurement results obtained with the developed system was verified against those obtained using a commercial open-ended probe system as well the values of well known materials documented in open literature. Since there is no study found in the literature about the complex permittivity values of oil sands at 2.45 GHz, the present study would be of great help and important guide for those who plan to design and manufacture microwave energy applicators in order to extract the bitumen from the oil sands.

  4. Sand Wave Migrations Within Monterey Submarine Canyon, California

    Science.gov (United States)

    Xu, J.; Wong, F. L.

    2006-12-01

    Repeated high-resolution multi-beam surveys revealed the existence of a sand wave field along the axis of the Monterey submarine canyon between 20 and 300 m water depth. These sand waves range in wave length from 20 to 70 m and 2 to 5 m in height. Comparison of sequential multi-beam grid data (months apart) indicates that the sand waves apparently migrate upcanyon at some places while the same data clearly show that the sand waves migrate downcanyon at other locations. One hypothesis is that strong internal tidal flows, whose upcanyon component is intensified by the narrow canyon, are responsible for forming the sand wave field and for migrating the sand waves upcanyon. Another hypothesis is that the sand wave field is formed by creeping (analogous to the movement within glaciers), and in general they move in the downcanyon direction. A field experiment was conducted in 2005-06 to measure the driving forces (in hypothesis #1) that form and move the sand waves, and to collect the internal sedimentological structure within the sand waves that could reveal information on hypothesis #2. A mooring designed to measure near-floor velocity profiles, temperature, salinity, and sediment concentration in the water column was deployed for one year (June 2005 -July 2006) at 250 m water depth, slightly downcanyon of the sand wave field. In addition, a mapping survey was conducted in February, 2006 for collecting multi-beam and chirp profiles in the canyon head area of the sand wave field. Preliminary examination of the ADCP (downward looking) showed some very interesting features - the near- floor current dramatically changes with the spring-neap cycle of the surface tide. The time variation of the along-canyon current during neap tides - a sudden jump of upcanyon velocity before gradually tapering down, is typical of internal tides (internal bores). The time variation during spring tides when along canyon velocities reverse directions from upcanyon to downcanyon and gradually

  5. Features of Sand-dust Deposits in Harbin City, China

    Institute of Scientific and Technical Information of China (English)

    XIE Yuanyun; ZHANG Yan; HE Kui; ZHOU Jia; KANG Chunguo

    2006-01-01

    From the sedimentologic view, this paper analyses the grain-size distribution and the chemical composition of the deposits from sand-dust storm, occurring in Harbin on March 20, 2002. The result indicates that there exist plentiful coarse matters in the sand-dust deposits in Harbin, and the sand-dust composition presents obvious three peak distribution characteristics, indicating that the sand-dust in Harbin is composed of multi-origin components. The grain-size composition consists of silt (4-8Φ), accounting for 71.18% of the total, sand (>4Φ), 21.70%, and clay (<8Φ), only 7.13%. The average grain size (Mz) is 5.14Φ. The chemical elements of the deposits are mainly SiO2 and Al2O3 and Fe2O3, totally occupying 77.8%. The enrichment factors (EF) of Mg, K, Si, Fe, Mn, P, Ti, Co, Ni and V elements are all about 1, which mainly come from lithosphere source, while parts ofCu, Pb, Zn, Cr and Se elements are from pollution sources out of lithosphere source, and As, Cd and Sb elements are mainly from pollution sources. Based on the comprehensive analysis of grain-size, chemical composition, enrichment factor (EF), discriminant function (DF) and matter source index (PI), this paper points out that the grain-size distribution and element composition of the sand-dust deposits in Harbin are evidently different from the loess and sand-dust in Lanzhou, and that matter source of the sand-dust in Harbin is different from the loess in Northwest China and the sand-dust in Lanzhou. The sand-dust deposits in Harbin are an admixture of coarse grains transmitted in short distance and fine grains transported in long distance. The plentiful coarse grains of the sand-dust deposits in Harbin origin from sand of local spot, and are the near-source deposits transported by low altitude airflow.

  6. Thermal Properties of Foundry Mould Made of Used Green Sand

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2016-03-01

    Full Text Available The paper presents results of measuring heat diffusivity and thermal conductivity coefficients of used green foundry sand in temperature range ambient − 600 °C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements of the mould temperature field during the solidification of the casting, the temperature relationships of the measured properties were evaluated. It was confirmed that the obtained relationships are complex and that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured and solidified casting.

  7. High Temperature Thermal Properties of Bentonite Foundry Sand

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2015-06-01

    Full Text Available The paper presents results of measuring thermal conductivity and heat capacity of bentonite foundry sand in temperature range ambient - 900­­°C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements of the mould temperature field during the solidification of the casting, the temperature relationships of the measured properties were evaluated. It was confirmed that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured casting.

  8. Differences and commonalities impregnation of dry and wet sand

    Directory of Open Access Journals (Sweden)

    Maujuda МUZAFFAROVA

    2014-09-01

    Full Text Available The article is devoted to research new methods of physic-chemical methods of preventing deflation to protect railways and highways from such phenomena as exogenous sand drifts. In particular, first studied the possibility of using binders in sand wet state. Results can significantly extend the scope of the method, and identified with particular impregnation maintaining stability requirements protective cover reduces both the concentration previously recommended binders, and their costs, thereby securing implementation in practice of shifting sands resource-saving technology.

  9. Strength properties of moulding sands with chosen biopolymer binders

    Directory of Open Access Journals (Sweden)

    St.M. Dobosz

    2010-07-01

    Full Text Available The article presents the results of primary researches of the IV generation moulding sands, in which as the binders are used differentbiodegradable materials. The bending and the tensile strength of the moulding sands with polylactide, poly(lactic-co-glycolic acid,polycaprolactone, polyhydroxybutyrate and cellulose acetate as binders were measured. The researches show that the best strengthproperties have the moulding sands with polylactide as binder. It was proved that the tested moulding sands’ strength properties are goodenough for foundry practice.

  10. Measurement of elastic modulus and evaluation of viscoelasticity of foundry green sand

    Directory of Open Access Journals (Sweden)

    Qingchun XIANG

    2004-08-01

    Full Text Available Elastic modulus is an important physical parameter of molding sand; it is closely connected with molding sand's properties. Based on theories of rheology and molding sand microdeformation, elastic modulus of molding sand was measured and investigated using the intelligent molding sand multi-property tester developed by ourselves. The measuring principle was introduced. Effects of bentonite percentage and compactibility of the molding sand were experimentally studied. Furthermore, the essential viscoelastic nature of green sand was analyzed. It is considered that viscoelastic deformation of molding sand consists mainly of that of Kelvin Body of clay membrane, and elastic modulus of molding sand depends mainly on that of Kelvin Body which is the elastic component of clay membrane between sands. Elastic modulus can be adopted as one of the property parameters, and can be employed to evaluate viscoelastic properties of molding sand.

  11. Measurement of elastic modulus and evaluation of viscoelasticity of foundry green sand

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Elastic modulus is an important physical parameter of molding sand; it is closely connected with molding sand's properties. Based on theories of rheology and molding sand microdeformation, elastic modulus of molding sand was measured and investigated using the intelligent molding sand multi-property tester developed by ourselves. The measuring principle was introduced. Effects of bentonite percentage and compactibility of the molding sand were experimentally studied. Furthermore, the essential viscoelastic nature of green sand was analyzed. It is considered that viscoelastic deformation of molding sand consists mainly of that of Kelvin Body of clay membrane, and elastic modulus of molding sand depends mainly on that of Kelvin Body which is the elastic component of clay membrane between sands. Elastic modulus can be adopted as one of the property parameters, and can be employed to evaluate the viscoelastic properties of molding sand.

  12. Hydrographic and Impairment Statistics Database: SAND

    Data.gov (United States)

    National Park Service, Department of the Interior — Hydrographic and Impairment Statistics (HIS) is a National Park Service (NPS) Water Resources Division (WRD) project established to track certain goals created in...

  13. Advanced Techniques for Simulating the Behavior of Sand

    Science.gov (United States)

    Clothier, M.; Bailey, M.

    2009-12-01

    Computer graphics and visualization techniques continue to provide untapped research opportunities, particularly when working with earth science disciplines. Through collaboration with the Oregon Space Grant and IGERT Ecosystem Informatics programs we are developing new techniques for simulating sand. In addition, through collaboration with the Oregon Space Grant, we’ve been communicating with the Jet Propulsion Laboratory (JPL) to exchange ideas and gain feedback on our work. More specifically, JPL’s DARTS Laboratory specializes in planetary vehicle simulation, such as the Mars rovers. This simulation utilizes a virtual "sand box" to test how planetary rovers respond to different terrains while traversing them. Unfortunately, this simulation is unable to fully mimic the harsh, sandy environments of those found on Mars. Ideally, these simulations should allow a rover to interact with the sand beneath it, particularly for different sand granularities and densities. In particular, there may be situations where a rover may become stuck in sand due to lack of friction between the sand and wheels. In fact, in May 2009, the Spirit rover became stuck in the Martian sand and has provided additional motivation for this research. In order to develop a new sand simulation model, high performance computing will play a very important role in this work. More specifically, graphics processing units (GPUs) are useful due to their ability to run general purpose algorithms and ability to perform massively parallel computations. In prior research, simulating vast quantities of sand has been difficult to compute in real-time due to the computational complexity of many colliding particles. With the use of GPUs however, each particle collision will be parallelized, allowing for a dramatic performance increase. In addition, spatial partitioning will also provide a speed boost as this will help limit the number of particle collision calculations. However, since the goal of this

  14. Aerolian erosion, transport, and deposition of volcaniclastic sands among the shifting sand dunes, Christmas Lake Valley, Oregon: TIMS image analysis

    Science.gov (United States)

    Edgett, Kenneth S.; Ramsey, Michael S.; Christensen, Philip R.

    1995-01-01

    Remote sensing is a tool that, in the context of aeolian studies, offers a synoptic view of a dune field, sand sea, or entire desert region. Blount et al. (1990) presented one of the first studies demonstrating the power of multispectral images for interpreting the dynamic history of an aeolian sand sea. Blount's work on the Gran Desierto of Mexico used a Landsat TM scene and a linear spectral mixing model to show where different sand populations occur and along what paths these sands may have traveled before becoming incorporated into dunes. Interpretation of sand transport paths and sources in the Gran Desierto led to an improved understanding of the origin and Holocene history of the dunes. With the anticipated advent of the EOS-A platform and ASTER thermal infrared capability in 1998, it will become possible to look at continental sand seas and map sand transport paths using 8-12 mu m bands that are well-suited to tracking silicate sediments. A logical extension of Blount's work is to attempt a similar study using thermal infrared images. One such study has already begun by looking at feldspar, quartz, magnetite, and clay distributions in the Kelso Dunes of southern California. This paper describes the geology and application of TIMS image analysis of a less-well known Holocene dune field in south central Oregon using TIMS data obtained in 1991.

  15. Method of the Moulding Sands Binding Power Assessment in Two-Layer Moulds Systems

    Directory of Open Access Journals (Sweden)

    M. Holtzer

    2014-07-01

    Full Text Available More and more foundry plants applying moulding sands with water-glass or its substitutes for obtaining the high-quality casting surface at the smallest costs, consider the possibility of implementing two-layer moulds, in which e.g. the facing sand is a sand with an organic binder (no-bake type and the backing sand is a sand with inorganic binder. Both kinds of sands must have the same chemical reaction. The most often applied system is the moulding sand on the water-glass or geopolymer bases - as the backing sand and the moulding sand from the group of self-hardening sands with a resol resin - as the facing sand. Investigations were performed for the system: moulding sand with inorganic GEOPOL binder or moulding sand with water glass (as a backing sand and moulding sand, no-bake type, with a resol resin originated from various producers: Rezolit AM, Estrofen, Avenol NB 700 (as a facing sand. The LUZ apparatus, produced by Multiserw Morek, was adapted for investigations. A special partition with cuts was mounted in the attachment for making test specimens for measuring the tensile strength. This partition allowed a simultaneous compaction of two kinds of moulding sands. After 24 hours of hardening the highest values were obtained for the system: Geopol binder - Avenol resin.

  16. Observations of several characteristics of aeolian sand movement in the Taklimakan Desert

    Institute of Scientific and Technical Information of China (English)

    HAN; Zhiwen; DONG; Zhibao; WANG; Tao; CHEN; Guangting; YAN

    2004-01-01

    With both sides of the Taklimakan Desert highway line as the study area, three typical aeolian sand landforms, i.e. complex dune ridge, barchan dune and flat sand land, were selected as sand beds for the observation, analysis and research of the characteristics of aeolian sand movement such as aeolian sand stream structure, sand transport intensity, etc. in the Taklimakan Desert. The results show that there is a linear relation between the height and the log of sand transport rate over transverse dune chain, longitudinal dune ridge and flat sand land, i.e. the sand transport percentage decreases exponentially with increasing height. Sand transport rate within the 10 cm height above the bed surface accounts for 80%-95% of the total sand transport rate of the observed height (40 cm), while the sand transport rate in 20 cm occupies 98% of the total amount. Sand transport rate (g·cm-1·min-1) differs greatly with respect to different landform types and different topographic positions. Based on the investigation and analysis on aeolian sand landform origin, morphological type and distribution feature, the two typical landform assemblages, complex transverse dune chain-alluvial plain and huge longitudinal dune ridge-interridge lowland in the Taklimakan Desert were divided into several characteristic zones of aeolian sand movement states. From this one can qualitatively judge the types and severities of sand disasters at various topographic positions in the engineering installation region and further put forward concrete schemes and measures to control sand damages.

  17. Fragmentation modeling of a resin bonded sand

    Science.gov (United States)

    Hilth, William; Ryckelynck, David

    2017-06-01

    Cemented sands exhibit a complex mechanical behavior that can lead to sophisticated models, with numerous parameters without real physical meaning. However, using a rather simple generalized critical state bonded soil model has proven to be a relevant compromise between an easy calibration and good results. The constitutive model formulation considers a non-associated elasto-plastic formulation within the critical state framework. The calibration procedure, using standard laboratory tests, is complemented by the study of an uniaxial compression test observed by tomography. Using finite elements simulations, this test is simulated considering a non-homogeneous 3D media. The tomography of compression sample gives access to 3D displacement fields by using image correlation techniques. Unfortunately these fields have missing experimental data because of the low resolution of correlations for low displacement magnitudes. We propose a recovery method that reconstructs 3D full displacement fields and 2D boundary displacement fields. These fields are mandatory for the calibration of the constitutive parameters by using 3D finite element simulations. The proposed recovery technique is based on a singular value decomposition of available experimental data. This calibration protocol enables an accurate prediction of the fragmentation of the specimen.

  18. Alberta oil sands crudes : upgrading and marketing

    Energy Technology Data Exchange (ETDEWEB)

    Ashar, M. [Suncor Energy, Fort McMurray, AB (Canada)

    2008-05-15

    Open pit mining and in situ techniques, such as steam stimulation, are used to recover Alberta's bitumen and heavy oil resources, which have higher viscosities than conventional hydrocarbons. The bitumen is typically upgraded to synthetic crude oil (SCO). In the simplest processing scheme, the bitumen is blended with diluent for ease in pipeline transport and then processed at refineries with upgrading facilities. The bitumen is also upgraded to light SCO at world-scale upgraders in Alberta. The SCO is then processed at refineries in downstream markets. The 2 categories of upgrading, notably primary and secondary upgrading, were described in this article along with technology options for both categories. Slurry hydrocracking is regarded as the most interesting emerging residual fuel upgrading technology. It combines special catalyst mixes with the latest slurry reactor designs as well as innovative catalyst capture and recycle schemes to produce very high conversions and potentially superior upgrading economics. The increase in volume and rate of SCO from Alberta provides refiners in the oil sands marketing sector an unprecedented choice of opportunities to improve profitability. Key trends indicate that production will increase substantially from 2008 to 2030. 5 figs.

  19. Oblique second-order sand transport pathways on an intertidal sand flat in a natural tidal inlet system

    DEFF Research Database (Denmark)

    Ernstsen, Verner Brandbyge; Lefebvre, Alice; Kroon, Aart

    2013-01-01

    A detailed digital elevation model (DEM) of an intertidal sand flat in the Knudedyb tidal inlet in the Danish Wadden Sea, derived from high-resolution Light Detection And Ranging (LiDAR) data, reveals a large elongated bedform field with complex bedform morphologies and drainage channel networks....... This indicates distinct second-order sand transport pathways oblique to the main tidal transport pathways. A conceptual model for the development of the bedforms and channels is presented, which comprises hypotheses of the hydrodynamic forcing of the different second-order sand transport pathways. During flood...

  20. Assessment of offshore New Jersey sources of Beach replenishment sand by diversified application of geologic and geophysical methods

    Science.gov (United States)

    Waldner, J.S.; Hall, D.W.; Uptegrove, J.; Sheridan, R.E.; Ashley, G.M.; Esker, D.

    1999-01-01

    Beach replenishment serves the dual purpose of maintaining a source of tourism and recreation while protecting life and property. For New Jersey, sources for beach sand supply are increasingly found offshore. To meet present and future needs, geologic and geophysical techniques can be used to improve the identification, volume estimation, and determination of suitability, thereby making the mining and managing of this resource more effective. Current research has improved both data collection and interpretation of seismic surveys and vibracore analysis for projects investigating sand ridges offshore of New Jersey. The New Jersey Geological Survey in cooperation with Rutgers University is evaluating the capabilities of digital seismic data (in addition to analog data) to analyze sand ridges. The printing density of analog systems limits the dynamic range to about 24 dB. Digital acquisition systems with dynamic ranges above 100 dB can permit enhanced seismic profiles by trace static correction, deconvolution, automatic gain scaling, horizontal stacking and digital filtering. Problems common to analog data, such as wave-motion effects of surface sources, water-bottom reverberation, and bubble-pulse-width can be addressed by processing. More than 160 line miles of digital high-resolution continuous profiling seismic data have been collected at sand ridges off Avalon, Beach Haven, and Barnegat Inlet. Digital multichannel data collection has recently been employed to map sand resources within the Port of New York/New Jersey expanded dredge-spoil site located 3 mi offshore of Sandy Hook, New Jersey. Multichannel data processing can reduce multiples, improve signal-to-noise calculations, enable source deconvolution, and generate sediment acoustic velocities and acoustic impedance analysis. Synthetic seismograms based on empirical relationships among grain size distribution, density, and velocity from vibracores are used to calculate proxy values for density and velocity

  1. Narrative report : Sand Lake National Wildlife Refuge : 1968

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1968 calendar year. The report begins by...

  2. Sand and Gravel Operations in the United States - Direct Download

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  3. Integrated Pest Management Plan for Sand Lake NWR Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of the Integrated Pest Management Plan is to provide a comprehensive, environmentally sensitive approach to managing pests on the Sand Lake WMD. The...

  4. Documenting the global impacts of beach sand mining

    Science.gov (United States)

    Young, R.; Griffith, A.

    2009-04-01

    For centuries, beach sand has been mined for use as aggregate in concrete, for heavy minerals, and for construction fill. The global extent and impact of this phenomenon has gone relatively unnoticed by academics, NGOs, and major news sources. Most reports of sand mining activities are found at the very local scale (if the mining is ever documented at all). Yet, sand mining in many localities has resulted in the complete destruction of beach (and related) ecosystems along with severe impacts to coastal protection and tourism. The Program for the Study of Developed Shorelines at Western Carolina University and Beachcare.org have initiated the construction of a global database of beach sand mining activities. The database is being built through a combination of site visits and through the data mining of media resources, peer reviewed papers, and reports from private and governmental entities. Currently, we have documented sand mining in 35 countries on 6 continents representing the removal of millions of cubic meters of sand. Problems extend from Asia where critical infrastructure has been disrupted by sand mining to the Caribbean where policy reform has swiftly followed a highly publicized theft of sand. The Program for the Study of Developed Shorelines recently observed extensive sand mining in Morocco at the regional scale. Tens of kilometers of beach have been stripped of sand and the mining continues southward reducing hope of a thriving tourism-based economy. Problems caused by beach sand mining include: destruction of natural beaches and the ecosystems they protect (e.g. dunes, wetlands), habitat loss for globally important species (e.g. turtles, shorebirds), destruction of nearshore marine ecosystems, increased shoreline erosion rates, reduced protection from storms, tsunamis, and wave events, and economic losses through tourist abandonment and loss of coastal aesthetics. The threats posed by sand mining are made even more critical given the prospect of a

  5. Production of oil from Intermountain West tar sands deposits

    Energy Technology Data Exchange (ETDEWEB)

    Glassett, J.M.; Glassett, J.A.

    1976-03-01

    Six tar sand deposits in the Intermountain West, each containing more than one billion barrels of oil in place, are identified. All of these deposits are in eastern Utah and contain a total of twenty-eight billion barrels of oil. The names of the six deposits arranged in descending order of desirability for large-scale surface-mining oil recovery operations are as follows: Sunnyside, Tar Sand Triangle, Asphalt Ridge, P.R. Spring, Circle Cliffs, and Hill Creek. An overview of each deposit is presented including geology, surface-mining variables, chemical processing variables, environmental aspects, and economics. A comparison of Utah tar sands and Athabasca, Alberta, Canada tar sands is also presented.

  6. Characterizing volumetric deformation behavior of naturally occuring bituminous sand materials

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2009-05-01

    Full Text Available newly proposed hydrostatic compression test procedure. The test procedure applies field loading conditions of off-road construction and mining equipment to closely simulate the volumetric deformation and stiffness behaviour of oil sand materials. Based...

  7. Reef community structure, Sand Island, Oahu HI, (NODC Accession 0000177)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These reports provide the results of nine years (1990-98) of an annual quantitative monitoring of shallow marine communities inshore of the Sand Island Ocean...

  8. Laboratory Test Setup for Cyclic Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina; Ibsen, Lars Bo; Andersen, Lars Vabbersgaard

    2017-01-01

    conditions for all tests. For verifications purposes six static tension tests conducted at three different vertical effective stress levels of 0, 35 and 70 kPa. The load-displacement curves showed that the test setup provides repeatable test results. A preliminary comparison between the unit shaft friction......This paper presents a comprehensive description and the considerations regarding the design of a new laboratory test setup for testing cyclic axially loaded piles in sand. The test setup aims at analysing the effect of axial one-way cyclic loading on pile capacity and accumulated displacements....... Another aim was to test a large diameter pile segment with dimensions resembling full-scale piles to model the interface properties between pile and sand correctly. The pile segment was an open-ended steel pipe pile with a diameter of 0.5 m and a length of 1 m. The sand conditions resembled the dense sand...

  9. The cone penetration test in unsaturated silty sands

    Directory of Open Access Journals (Sweden)

    Yang Hongwei

    2016-01-01

    Full Text Available Very little is known about how to interpret the cone penetration test (CPT when performed in unsaturated soils. The few published studies on the CPT in unsaturated soils have focused on either clean sands or a silt. In this study new results of laboratory-controlled CPTs in an unsaturated silty sand are presented. The silty sand exhibits hydraulic hysteresis and suction hardening. Suction is observed to have a pronounced affect on measured cone penetration resistance. For an isotropic net confining stress of 60 kPa it is observed that higher suctions give rise to cone penetration resistances that are 50% larger than those for lower suctions. A semi-theoretical correlation is presented that links measured cone penetration resistances to initial relative density and mean effective stress. For this silty sand it is shown that failing to account for suction may result in significant overestimations and unsafe predictions of soil properties from measured cone penetration resistances.

  10. Comprehensive Conservation Plan: Sand Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Comprehensive Conservation Plan (CCP) was written to guide management on Sand Lake NWR for the next 15 years. This plan outlines the Refuge vision and purpose...

  11. Sand Lake Migratory Waterfowl Refuge : Monthly report : March, 1938

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake Migratory Waterfowl Refuge during March of 1938. Weather conditions, waterfowl, upland game, fur and predator control,...

  12. Airborne sand and dust soiling of solar collecting mirrors

    Science.gov (United States)

    Sansom, Christopher; Almond, Heather; King, Peter; Endaya, Essam; Bouaichaoui, Sofiane

    2017-06-01

    The reflectance of solar collecting mirrors can be significantly reduced by sand and dust soiling, particularly in arid environments. Larger airborne sand and dust particles can also cause damage by erosion, again reducing reflectance. This work describes investigations of the airborne particle size, shape, and composition in three arid locations that are considered suitable for CSP plants, namely in Iran, Libya, and Algeria. Sand and dust has been collected at heights between 0.5 to 2.0m by a variety of techniques, but are shown not to be representative of the particle size found either in ground dust and sand, or on the solar collecting mirror facets themselves. The possible reasons for this are proposed, most notably that larger particles may rebound from the mirror surface. The implications for mirror cleaning and collector facet erosion are discussed.

  13. Narrative report : Sand Lake Wetland Management District : 1971

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake WMD outlines Refuge accomplishments during the 1971 calendar year. The report begins by summarizing the weather...

  14. Annual report : 1938-1939 : Sand Lake Migratory Waterfowl Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake Migratory Waterfowl Refuge covers the 1939 fiscal year. Wildlife populations, artificial islands, haying, share cropping,...

  15. 76 FR 78168 - Importation of Chinese Sand Pears From China

    Science.gov (United States)

    2011-12-16

    ...; ] DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service 7 CFR Part 319 RIN 0579-AD42 Importation... fungicides. Paragraph (b)(3) would state that, when any sand pears destined for export to the United...

  16. LIQUEFACTION AND DISPLACEMENT OF SATURATED SAND UNDER VERTICAL VIBRATION LOADING

    Institute of Scientific and Technical Information of China (English)

    LU Xiaobing; TAN Qingming; CHENG C.M.; YU Shanbing; CUI Peng

    2004-01-01

    In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand, one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase continuous media theory. The development of the liquefaction and the liquefaction region are analyzed. It is shown that the vertical vibration loading could induce liquefaction.The rate of the liquefaction increases with the increase of the initial limit strain or initial porosity or amplitude and frequency of loading, and increases with the decrease of the permeability or initial modulus. It is shown also that there is a phase lag in the sand column. When the sand permeability distribution is non-uniform, the pore pressure and the strain will rise sharply where the permeability is the smallest, and fracture might be induced. With the development of liquefaction, the strength of the soil foundation becomes smaller and smaller. In the limiting case, landslides or debris flows could occur.

  17. Multi-Technique Study of a Martian Aeolian Sand Analog

    Science.gov (United States)

    Kuhlman, K.; Marshall, J.; Evans, N. D.; Luttge, A.

    2001-01-01

    Potential scientific returns from technological advances in various forms of microscopy and benchmarking of currently available in-situ measurements using an aeolian red dune sand from the central Australian desert. Additional information is contained in the original extended abstract.

  18. A Sand Control System for Light Oil Reservoir

    Institute of Scientific and Technical Information of China (English)

    Xiang Yuzhang

    1996-01-01

    @@ Over 30-year water flooding in light oil sandstone reservoirs with loose argillaceous cement in Karamay oilfield results in severe sand production, varying from well to well with the different date of well completion.

  19. Santa Barbara Littoral Cell CRSMP Offshore Sand Sources 2009

    Data.gov (United States)

    California Department of Resources — Offshore sand sources exist at four known locations and potentially other yet to be explored regions within the nearshore coastal shelf. Significant reserves of fine...

  20. Journal of EEA, Vol. 30, 2013 SAND SINTERING PROBLEM ON ...

    African Journals Online (AJOL)

    dell

    SAND SINTERING PROBLEM ON BRONZE CASTINGS. Asmamaw Tegegne* ... required to improve the quality of casting with regard to .... property in service and certain amount of zinc for .... a result of which huge finance is required. As seen.