WorldWideScience

Sample records for sands objectives project

  1. Sand Lake WMD vegetation mapping project update

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Final report on the vegetation mapping project at Sand Lake Wetland Management District. This project is being completed by the use of SPRING software and ground...

  2. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  3. Pilot Project Sand Groynes Delfland Coast

    NARCIS (Netherlands)

    Hoekstra, R.; Walstra, D.J.R.; Swinkels, C.S.

    2012-01-01

    In October and November 2009 a pilot project has been executed at the Delfland Coast in the Netherlands, constructing three small sandy headlands called Sand Groynes. Sand Groynes are nourished from the shore in seaward direction and anticipated to redistribute in the alongshore due to the impact of

  4. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-09-30

    The status of government sponsored projects undertaken to increase gas production from low-permeability gas sands of the western United States during August 1978 is summarized. Background information is given in the September 1977 Status Report, NVO/0655-100. One of the largest massive Hydraulic Fracture (MHF) treatment to date was performed on Gas Producing Enterprises Well No. CIGE 2-29. C.H. Atkinson, Western Gas Sands Project (WGSP) Manager and D.C. Bleakly, CER Corporation were observers. Oriented coring operations on the Mitchell Energy well, Muse-Duke No. 1 were observed by Atkinson and Bleakly near Mexia, Texas. The Fourth Annual Department of Energy Symposium on Enhanced Oil and Gas Recovery and Improved Drilling Methods was held on August 29-31, 1978 in Tulsa, Oklahoma. The USGS continued geological and geophysical studies in the four primary study areas. Low-level oblique photography of Tertiary and Cretaceous rocks exposed in the Rock Springs Uplift area was completed, and core from the J.C. Paine well in Montana was sampled for petrograhic analysis. Bartlesville Energy Technology Center continued work on the improved pressure coring system and anticipates completion of the project by September 30, 1978. Preliminary work began on the Parametric Analysis of MHF Test Data, an Engineering Study of Western Gas Sands, by Intercomp. The National Laboratories, funded by DOE are continuing their work in the area of research and development. The emphasis is on instrumentation systems, rock mechanics, mathematical modeling, and data analysis. The Mitchell Energy well, Muse Duke No. 1, has reached total depth and was logged on August 31, 1978. The DOE well test facility was moved from the RB-MHF 3 well in Colorado to Vernal, Utah for trailer modifications and checkout.

  5. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-11-30

    Progress of government-sponsored projects directed toward increasing gas production from the low-permeability gas sands of the western United States is summarized. A Technology Implementation Plan (TIP) meeting was held at the CER office in Las Vegas, Nevada, October 16--19 to initiate the implementation phase of the Enhanced Gas Recovery (EGR) working group activities. A WGSP Logging Program meeting was conducted on October 24, 1978, at CER offices to define the problems associated with logs in tight gas sands. CER personnel and the project manager attended a two-day course on the fundamentals of core and reservoir analysis in Denver, Colorado, and met with USGS personnel to discuss USGS work on the WGSP. A meeting was held to discuss a contract for coring a Twin Arrow well on the Douglas Creek Arch, Colorado. CER Corporation personnel attended the Geological Society of America Annual Meeting held in Toronto, Canada, October 23--27 and a Gas Stimulation Workshop at Sandia Laboratories in Albuquerque, New Mexico, October 11 and 12 to discuss recent mineback experiments conducted at the Nevada Test Site. Fiscal year 1979 projects initiated by USGS and the Energy Technology Centers and National Laboratories are progressing as scheduled. Mobil Research and Development Corporation fractured zone 8 of the F-31-13G well in Rio Blanco County, Colorado. Colorado Interstate Gas Company poured the concrete pad for the compresser expected to be delivered in December and were laying pipeline between the wells at month end. The Mitchell Energy well, Muse Duke No. 1 was flowing on test at a rate of 2,100 Mcfd and preparations proceeded to fracture the well on November 15 with approximately 1,000,000 gal of fluid and 3,000,000 lb of sand. Terra Tek completed laboratory analyses of cores taken from the Mitchell Energy well.

  6. Western Gas Sands Project: status report

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    Progress of the major government sponsored projects undertaken to increase gas production from low permeability gas sands of the western United States during March 1978 is summarized. The Bartlesville Energy Research Center (BERC) and participating National Laboratories, funded by DOE, are continuing their work in the area of research and development. The emphasis is on the development of new tools and instrumentation systems, rock mechanics, mathematical modeling and data analysis. Field Tests and demonstrations active in the Uinta and Piceance Basins include: Gas Producing Enterprises (GPE) Natural Buttes Unit Wells No. 9, 14, 18, 19, 20, 21 and 22, Mobil Research and Development Corporation, Well No. F-31-13G, and Rio Blanco Natural Gas Company, Well No. 498-4-1. Gas Producing Enterprises Natural Buttes Unit Well No. 9 was fractured on March 27, 1978. The treatment consisted of 554,000 pounds of sand and 349,000 gallons of gel. Mitchell Energy Corporation of Houston, Texas was awarded Department of Energy Contract EF-78-C-08-1547 on March 15, 1978. Field work under this contract is scheduled to begin on June 15, 1978, with the drilling of a new well.

  7. Projective ambidextrous objects

    CERN Document Server

    Geer, Nathan; Patureau-Mirand, Bertrand

    2011-01-01

    We provide a necessary and sufficient condition for a simple object in a pivotal k-category to be ambidextrous. As a consequence we prove that they exist for factorizable ribbon Hopf algebras, modular representations of finite groups and their quantum doubles, complex and modular Lie (super)algebras, the (1,p) minimal model in conformal field theory, and quantum groups at a root of unity.

  8. New international developments in oil sands projects

    Energy Technology Data Exchange (ETDEWEB)

    Vercoe, J. [Fasken Martineau DuMoulin LLP, London (United Kingdom)

    2008-09-15

    Governments and oil companies from a variety of different countries are now working to create alternative oil and gas operations and the policies required to enable their financial success. The Africa Energy Commission was developed to coordinate policy and act as a framework for the African energy sector. Several large oil and gas operators have become involved in the creation of new contracts to develop training and human resources policies for the petroleum industry in Congo. Issues related to national oil companies and value creation in African countries are currently being studied by the World Bank. A biofuel alliance was recently signed between Congo and Brazil, and a Congo Forest Fund has also been created to help the inhabitants of the Congolese rainforest protect their environment. Congo is also offering opportunities for international companies to implement greenhouse gas (GHG) emission reduction programs to trade emission credits when requirements are satisfied. It was concluded that several African countries are suitable candidates for oil sands development. 1 fig.

  9. Western Gas Sands Project: stratigrapy of the Piceance Basin

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S. (comp.)

    1980-08-01

    The Western Gas Sands Project Core Program was initiated by US DOE to investigate various low permeability, gas bearing sandstones. Research to gain a better geological understanding of these sandstones and improve evaluation and stimulation techniques is being conducted. Tight gas sands are located in several mid-continent and western basins. This report deals with the Piceance Basin in northwestern Colorado. This discussion is an attempt to provide a general overview of the Piceance Basin stratigraphy and to be a useful reference of stratigraphic units and accompanying descriptions.

  10. Multidisciplinary Optimization Object Library Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of a library of Common MDO Objects is proposed, in which the software objects will automate a variety of recurring problems in the development of MDO...

  11. Multidisciplinary Optimization Object Library Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of a library of Common MDO Objects is proposed, in which the software objects will automate a variety of recurring problems in the development of MDO...

  12. Tar sands. Fuelling the climate crisis, undermining EU energy security and damaging development objectives

    Energy Technology Data Exchange (ETDEWEB)

    Wykes, S.; Heywood, S.; Urbaniak, D. (ed.); De Clerck, P. (ed.)

    2010-05-15

    Tar sands - bitumen that is extracted and upgraded to produce synthetic crude - has been heavily criticised for its poor environmental and social outcomes, locally and globally. Tar sands generates on average 3 to 5 times more greenhouse gas (GHG) emissions than conventional oil, representing a huge threat to climate protection. Canada is currently the only major centre of production but investment is expanding, including by European oil companies such as BP, Shell, Total and ENI. The second part of this report shows which oil companies are increasing their investments in tar sands and oil shale, and where. In Canada, tar sands development is the fastest growing source of GHG emissions and is undermining the country's Kyoto commitments. Tar sands projects are also extremely costly and capital intensive - to the point where investors and analysts have raised concerns about their longer-term financial viability in a world where the introduction of low-carbon regulation and reduced demand for expensive fossil fuels are increasingly likely. A more strategic approach to energy policy would encourage redirection of the hundreds of billions to be invested over the next decade in tar sands production in Canada alone into development of renewable fuel technologies and energy efficiency measures.

  13. Integrated Multidisciplinary Optimization Objects Project

    Data.gov (United States)

    National Aeronautics and Space Administration — M4 Engineering proposes to implement physics-based, multidisciplinary analysis and optimization objects that will be integrated into a Python, open-source framework...

  14. Multi-objective optimisation in carbon monoxide gas management at TRONOX KXN Sands

    Directory of Open Access Journals (Sweden)

    Stadler, Johan

    2014-08-01

    Full Text Available Carbon monoxide (CO is a by-product of the ilmenite smelting process from which titania slag and pig iron are produced. Prior to this project, the CO at Tronox KZN Sands in South Africa was burnt to get rid of it, producing carbon dioxide (CO2. At this plant, unprocessed materials are pre-heated using methane gas from an external supplier. The price of methane gas has increased significantly; and so this research considers the possibility of recycling CO gas and using it as an energy source to reduce methane gas demand. It is not possible to eliminate the methane gas consumption completely due to the energy demand fluctuation, and sub-plants have been assigned either CO gas or methane gas over time. Switching the gas supply between CO and methane gas involves production downtime to purge supply lines. Minimising the loss of production time while maximising the use of CO arose as a multi-objective optimisation problem (MOP with seven decision variables, and computer simulation was used to evaluate scenarios. We applied computer simulation and the multi-objective optimisation cross-entropy method (MOO CEM to find good solutions while evaluating the minimum number of scenarios. The proposals in this paper, which are in the process of being implemented, could save the company operational expenditure while reducing the carbon footprint of the smelter.

  15. POMP - Pervasive Object Model Project

    DEFF Research Database (Denmark)

    Schougaard, Kari Rye; Schultz, Ulrik Pagh

    applications, we consider it essential that a standard object-oriented style of programming can be used for those parts of the application that do not concern its mobility. This position paper describes an ongoing effort to implement a language and a virtual machine for applications that execute in a pervasive...... mobility. Mobile agent platforms are often based on such virtual machines, but typically do not provide strong mobility (the ability to migrate at any program point), and have limited support for multi-threaded applications, although there are exceptions. For a virtual machine to support mobile...... computing environment. This system, named POM (Pervasive Object Model), supports applications split into coarse-grained, strongly mobile units that communicate using method invocations through proxies. We are currently investigating efficient execution of mobile applications, scalability to suit...

  16. Western Gas Sands Project. Status report, 1 January 1979--31 January 1979

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-01-01

    Aim is to increase gas production from the low-permeability gas sands of the western U.S. Progress is reported on: project management, resource assessment, R and D at various facilities, and field tests and demonstrations. (DLC)

  17. Examination of oil sands projects : gasification, CO{sub 2} emissions and supply costs

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, K. [Energy Resources Conservation Board, Calgary, AB (Canada)

    2008-10-15

    Non-conventional resources such as Alberta's oil sands are experiencing increased global interest because of the decline in global conventional oil and natural gas reserves. Bitumen extraction and upgrading is an energy intensive process. This paper provided a general discussion of Alberta's oil sands reserves, production and energy requirements. The paper discussed the application of different technologies to the oil sands, and in particular, the use of gasification as a method to produce bitumen-derived synthesis gas. Two oil sands projects currently under construction and implementing gasification technology were briefly described. The paper also provided a comparison of emission intensities from projects that employ gasification leading to a forecast of carbon dioxide equivalent emissions from the oil sands. The impact of Alberta's legislation and the federal framework on greenhouse gas emissions were also examined. Last, the paper discussed a supply cost methodology to compare an integrated extraction and upgrading project using gasification versus a similar project using a conventional steam methane reforming process (SMR). It was concluded that after comparing carbon dioxide emission intensities across different types of projects, the type of project that would be most heavily impacted by greenhouse gas emissions penalties was an in-situ extraction with an upgrading project that employed gasification technology. 36 refs., 5 tabs., 12 figs., 1 appendix.

  18. Experimental and theoretical modelling of sand-water-object interaction under nonlinear progressive waves

    Science.gov (United States)

    Testik, Firat Yener

    An experimental and theoretical study has been conducted to obtain a fundamental understanding of the dynamics of the sand, water and a solid object interaction as progressive gravity waves impinge on a sloping beach. Aside from obvious scientific interest, this exceedingly complex physical problem is important for naval applications, related to the behavior of disk/cylindrical shaped objects (mines) in the coastal waters. To address this problem, it was divided into a set of simpler basic problems. To begin, nonlinear progressive waves were investigated experimentally in a wave tank for the case of a rigid (impermeable) sloping bottom. Parameterizations for wave characteristics were proposed and compared with the experiments. In parallel, a numerical wave tank model (NWT) was calibrated using experimental data from a single run, and wave field in the wave tank was simulated numerically for the selected experiments. Subsequently, a layer of sand was placed on the slope and bottom topography evolution processes (ripple and sandbar dynamics, bottom topography relaxation under variable wave forcing, etc.) were investigated experimentally. Models for those processes were developed and verified by experimental measurements. Flow over a circular cylinder placed horizontally on a plane wall was also studied. The far-flow field of the cylinder placed in the wave tank was investigated experimentally and numerical results from the NWT simulations were compared with the experimental data. In the mean time, the near-flow velocity/vorticity field around a short cylinder under steady and oscillatory flow was studied in a towing tank. Horseshoe vortex formation and periodic shedding were documented and explained. With the understanding gained through the aforementioned studies, dynamics and burial/scour around the bottom objects in the wave tank were studied. Possible scenarios on the behavior of the disk-shaped objects were identified and explained. Scour around 3D cylindrical

  19. US/Brazil joint pilot project objectives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This paper describes a joint US/Brazil pilot project for rural electrification, whose major goals are: to establish technical, institutional, and economic confidence in using renewable energy (PV and wind) to meet the needs of the citizens of rural Brazil; to establish on-going institutional, individual and business relationships necessary to implement sustainable programs and commitments; to lay the groundwork for larger scale rural electrification through the use of distributed renewable technologies. The projects have supported low power home lighting systems, lighting and refrigeration for schools and medical centers, and water pumping systems. This is viewed as a long term project, where much of the equipment will come from the US, but Brazil will be responsible for program management, and sharing data gained from the program. The paper describes in detail the Brazilian program which was instituted to support this phased project.

  20. Advanced 3D Object Identification System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During the Phase I effort, OPTRA developed object detection, tracking, and identification algorithms and successfully tested these algorithms on computer-generated...

  1. The CTQ flowdown as a conceptual model of project objectives

    NARCIS (Netherlands)

    H. de Koning; J. de Mast

    2007-01-01

    The purpose of this article is to describe and clarify a tool that is at the core of the definition phase of most quality improvement projects. This tool is called the critical to quality (CTQ) flowdown. It relates high-level strategic focal points to project objectives. In their turn project object

  2. The future of the Canadian oil sands: Engineering and project management advances

    Energy Technology Data Exchange (ETDEWEB)

    Madden, Peter; Morawski, Jacek

    2010-09-15

    Production technology and project management developments in Canada's oil sands industry, in the context of AMEC's experience as EPCM service provider, are discussed. Effective project management systems and workfront planning are critical to achieve cost and schedule targets and optimum construction execution. Construction Work Packages divide work into discrete pieces and Construction Work Execution Plans influence scheduling of engineering and procurement deliverables. AMEC's Engineering Data Warehouse works with intelligent engineering design tools to ensure information related to a piece of equipment is consistent across all systems. HSSE systems are proactively developed and AMEC's progressive improvement in safety performance is demonstrated.

  3. Detection of Buried Objects : The MUD Project

    NARCIS (Netherlands)

    Quesson, B.A.J.; Vossen, R. van; Zampolli, M.; Beckers, A.L.D.

    2011-01-01

    The aim of the Mine Underwater Detection (MUD) project at TNO is to experimentally investigate the acoustic and magnetic detection of explosives underwater, buried in a soft sediment layer. This problem is relevant for the protection of harbors and littoral assets against terrorist attacks and for

  4. Detection of Buried Objects : The MUD Project

    NARCIS (Netherlands)

    Quesson, B.A.J.; Vossen, R. van; Zampolli, M.; Beckers, A.L.D.

    2011-01-01

    The aim of the Mine Underwater Detection (MUD) project at TNO is to experimentally investigate the acoustic and magnetic detection of explosives underwater, buried in a soft sediment layer. This problem is relevant for the protection of harbors and littoral assets against terrorist attacks and for t

  5. Wearable Device for Objective Sleep Monitoring Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a critical requirement for a wearable device that can provide objective measures of sleep and activity for its crew during long duration spaceflight. In the...

  6. Ghost Imaging of Space Objects Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Ghost imaging is an optical imaging technique that utilizes the correlations between optical fields in two channels. One of the channels contains the object,...

  7. Advanced 3D Object Identification System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optra will build an Advanced 3D Object Identification System utilizing three or more high resolution imagers spaced around a launch platform. Data from each imager...

  8. Offshore Sand Resource Needs, Data Availability and Revaluation, and Beach Nourishment Projects in North Carolina

    Science.gov (United States)

    Conery, I.; Walsh, J. P.

    2016-12-01

    Storms and sea-level rise continue to impact the dynamic coastlines of North Carolina. Since the coastal region is economically critical to the state and yields numerous ecosystem services, many towns have planned beach nourishment projects. However, offshore sands compatible for nourishment are limited, and project costs fluctuate with borrow source proximity to the shoreline. Hurricane Sandy (2012) caused high water levels and waves resulting in localized overwash and erosion in the northeastern part of NC. In response, to effectively meet the rising nourishment demands for recovery after future storm events and for long-term resiliency, the Bureau of Ocean Energy Management (BOEM) recognized the need to compile and consolidate all geophysical and geologic information in federal waters (3-8 nm) along the East Coast states. A GIS database was created for NC using bathymetric, seismic reflection, sediment and other relevant data from federal, state and private entities. Information will be accessible to the public, coastal planners and managers to allow for informed decision-making and cost-effective project planning. Priority regions for seismic and core collection were determined based on data gaps and needs across the state. In addition, potential sand resource thickness and volume in northeastern NC were revaluated using comparisons of several overlapping datasets. Shoreline volume losses were calculated using long-term erosion rates and compared to historic and future nourishment projects. Finally, tourism-based revenue by town was evaluated and related to short and long-term nourishment costs.

  9. First deep azimuthal electromagnetic resistivity and rotary steerable system geonavigation project result in complex sands for Bare field in Orinoco oil belt, Venezuela.

    Energy Technology Data Exchange (ETDEWEB)

    Machado, P.; Guzman, R.; Rojas, C.; Ache, A. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of); Hazboun, N.K.; Gonzalez, K. [Schlumberger, Piso (Venezuela, Bolivarian Republic of)

    2009-07-01

    Petroleos de Venezuela SA (PDVSA) in the Mucura District has been evaluating the use of new technologies that facilitate reaching reservoirs with complex geologies, such as thin sands, uncertain dip changes, and unconsolidated sands. The objective was to improve overall operational efficiency. PDVSA carried out a pilot project in a thin and unconsolidated package where a very high drilling rate was expected. The selected sand, known as TL sand in the Oficina formation of the Bare field, was initially planned for cold production, with expected implementation of thermal enhanced oil recovery processes in the future. This paper discussed the pilot project, with particular reference to geology; well placement for thermal processes; planning; and objectives and challenges of the high viscosity of the oil contained in the Bare field. Details of the pre-job modelling were presented along with updates of the geological model. Achievements were also presented. It was concluded that the greatest value that this technology brings resides in the ability to measure the boundary distance in real time, allowing for appropriate action to be taken. 3 refs., 19 figs.

  10. Medium - Scale Projects Selection Using Multi-Objective Decision ...

    African Journals Online (AJOL)

    ... were administered to experienced technically oriented personnel in the study area ... of objective weights attached to project cost, environmental effects, reliability, ... energy source were used to evaluate objective weights for the study area.

  11. Mathematical programming and financial objectives for scheduling projects

    CERN Document Server

    Kimms, Alf

    2001-01-01

    Mathematical Programming and Financial Objectives for Scheduling Projects focuses on decision problems where the performance is measured in terms of money. As the title suggests, special attention is paid to financial objectives and the relationship of financial objectives to project schedules and scheduling. In addition, how schedules relate to other decisions is treated in detail. The book demonstrates that scheduling must be combined with project selection and financing, and that scheduling helps to give an answer to the planning issue of the amount of resources required for a project. The author makes clear the relevance of scheduling to cutting budget costs. The book is divided into six parts. The first part gives a brief introduction to project management. Part two examines scheduling projects in order to maximize their net present value. Part three considers capital rationing. Many decisions on selecting or rejecting a project cannot be made in isolation and multiple projects must be taken fully into a...

  12. APPLICATION OF DATA QUALITY OBJECTIVES AND MEASUREMENT QUALITY OBJECTIVES TO RESEARCH PROJECTS

    Science.gov (United States)

    The paper assists systematic planning for research projects. It presents planning concepts in terms that have some utility for researchers. For example, measurement quality objectives are more familiar to researchers than data quality objectives because these quality criteria are...

  13. Geologic report on the Sand Wash Drilling Project, Moffat and Routt Counties, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Carter, T.E.; Wayland, T.E.

    1981-09-01

    The Sand Wash Basin Drilling Project comprises twenty-seven (27) drill holes located in Moffat and Routt Counties, northwest Colorado, having an aggregate depth of 26,107.5 feet (7957.6 m). The holes penetrate the Browns Park Formation of Miocene age, which is a tuffaceous continental sandstone deposited in fluvial, eolian, and lacustrine environments. Partly based on project drilling results, uranium potential resource estimates for this formation in the $50/lb U/sub 3/O/sub 8/ forward-cost category have been increased by 34,476 tons U/sub 3/O/sub 8/ (35,036 metric tons). Three areas between Maybell and Craig, Colorado, considered favorable for uranium occurrences were verified as favorable by project drilling, and a fourth favorable area northwest of Maybell has been expanded. In addition, project drilling results indicate two new favorable areas, one north and northwest and one south of Steamboat Springs, Colorado. Anomalous radioactivity was detected in drill holes in all six study areas of the project. The most important factor in concentrating significant amounts of uranium in the target formation appears to be the availability of gaseous or liquid hydrocarbons and/or hydrogen sulfide gas as reductants. Where subjacent formations supply these reductants to the Browns Park Formation, project drilling encountered 0.05 percent to 0.01 percent uranium concentrations. Potential, though unproven, sources of these reductants are believed to underlie parts of all six project study areas.

  14. Western Gas Sands Project. Status report, 1 March 1979--31 March 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Progress of the government-sponsored projects directed toward increasing gas production from low-permeability gas sands of the western United States is summarized. During March, National Laboratories and Energy Technology Centers generally progressed on schedule. Bartlesville Energy Technology Center continued work on fracture conductivity, rock-fluid interaction, and log evaluation techniques. Theoretical and experimental work on hydraulic fracturing mechanics and analysis of well test data continued at Lawrence Livermore Laboratory. Sandia Laboratories completed preparations for the NTS evaluation test of the borehole seismic system. M.D. Wood, Inc. monitored the formation of a hydraulic fracture in the Wattenburg gas field, Weld County, Colorado. Measurement of bottom-hole pressure in the Miller No. 1 and Sprague No. 1 wells for the CIG cyclic gas injection project continued. The Mitchell Energy Corporation Muse--Duke No. 1 was flowing 4,000 MCFD in March. Efforts to clean out Mobil's PCU F31-13G well continued.

  15. About Shape Identification Methods of Objects Invariant to Projective Transformations

    Directory of Open Access Journals (Sweden)

    Gostev Ivan M.

    2016-01-01

    Full Text Available Diffculties concerning the choice of the invariants of the projective transformation groups used for the identification of the shapes of planar objects are illustrated and solutions allowing the derivation of robust identification criteria are discussed.

  16. A novel video object tracking approach using bidirectional projection

    Institute of Scientific and Technical Information of China (English)

    Zhi Liu(刘志); Jie Yang(杨杰)

    2004-01-01

    This paper proposes a novel video object tracking approach using birdirectional projection. Forward projection is exploited to locate the current video object with rough boundary information. Watershed segmentation is applied to the simplified gradient image of the current frame to obtain a reasonable parti tion. An improved backward projection, which incorporates pixel classification with region classification,is performed on some segmented regions in a rather small search range, and the tracking performance is enhanced in respect to both reliability and efficiency. Experimental results for various types of the MPEG-4 (moving picture experts group) test sequences demonstrate an efficient and faithful segmenta tion performance of the proposed approach.

  17. Potential Release of Manufactured Nano Objects during Sanding of Nano-Coated Wood Surfaces

    NARCIS (Netherlands)

    Fransman, W.; Bekker, C.; Tromp, P.; Duis, W.B.

    2016-01-01

    Increasing production and applications of manufactured nano objects (MNOs) have become a source for human exposure and therefore raise concerns and questions about the possible health effects. In this study, the potential release of nano objects, their agglomerates, and aggregates (NOAA) as a result

  18. Western Gas Sands Project. Status report, 1 March-31 March 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The March, 1980 progress of the government-sponsored projects directed towards increasing gas production from the low permeability gas sands of the western United States is summarized in this report. A site for the multi-well experiment was approved by the industry review committee; drilling is expected by mid-summer. Bartlesville Energy Technology Center continued work on fracture conductivity, rock/fluid interaction, and log evaluation and interpretation techniques. Lawrence Livermore Laboratory continued experimental and theoretical work on hydraulic fracturing mechanics and analysis of well test data. Analysis of data obtained from a test of the borehole seismic unit by Sandia Laboratories continued. The DOE Well Test Facility continued bottom-hole pressure buildup measurements at the Colorado Interstate Gas Company Miller No. 1 well.

  19. Multi-objective genetic optimization of linear construction projects

    Directory of Open Access Journals (Sweden)

    Fatma A. Agrama

    2012-08-01

    Full Text Available In the real world, the majority cases of optimization problems, met by engineers, are composed of several conflicting objectives. This paper presents an approach for a multi-objective optimization model for scheduling linear construction projects. Linear construction projects have many identical units wherein activities repeat from one unit to another. Highway, pipeline, and tunnels are good examples that exhibit repetitive characteristics. These projects represent a large portion of the construction industry. The present model enables construction planners to generate optimal/near-optimal construction plans that minimize project duration, total work interruptions, and total number of crews. Each of these plans identifies, from a set of feasible alternatives, optimal crew synchronization for each activity and activity interruptions at each unit. This model satisfies the following aspects: (1 it is based on the line of balance technique; (2 it considers non-serial typical activities networks with finish–start relationship and both lag or overlap time between activities is allowed; (3 it utilizes a multi-objective genetic algorithms approach; (4 it is developed as a spreadsheet template that is easy to use. Details of the model with visual charts are presented. An application example is analyzed to illustrate the use of the model and demonstrate its capabilities in optimizing the scheduling of linear construction projects.

  20. Filling-Based Techniques Applied to Object Projection Feature Estimation

    CERN Document Server

    Quesada, Luis

    2012-01-01

    3D motion tracking is a critical task in many computer vision applications. Unsupervised markerless 3D motion tracking systems determine the most relevant object in the screen and then track it by continuously estimating its projection features (center and area) from the edge image and a point inside the relevant object projection (namely, inner point), until the tracking fails. Existing object projection feature estimation techniques are based on ray-casting from the inner point. These techniques present three main drawbacks: when the inner point is surrounded by edges, rays may not reach other relevant areas; as a consequence of that issue, the estimated features may greatly vary depending on the position of the inner point relative to the object projection; and finally, increasing the number of rays being casted and the ray-casting iterations (which would make the results more accurate and stable) increases the processing time to the point the tracking cannot be performed on the fly. In this paper, we anal...

  1. West Valley Demonstration Project: Public information plan: Objectives, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, W. D.

    1987-09-30

    This report describes the objectives and proposed activities of the public information program. Included are statements of purpose, goals, approach, and methods of implementation. This office deals with local, state, and federal agencies to inform them on the status of this demonstration project. (TEM)

  2. Object-Image Correspondence for Algebraic Curves under Projections

    Directory of Open Access Journals (Sweden)

    Joseph M. Burdis

    2013-03-01

    Full Text Available We present a novel algorithm for deciding whether a given planar curve is an image of a given spatial curve, obtained by a central or a parallel projection with unknown parameters. The motivation comes from the problem of establishing a correspondence between an object and an image, taken by a camera with unknown position and parameters. A straightforward approach to this problem consists of setting up a system of conditions on the projection parameters and then checking whether or not this system has a solution. The computational advantage of the algorithm presented here, in comparison to algorithms based on the straightforward approach, lies in a significant reduction of a number of real parameters that need to be eliminated in order to establish existence or non-existence of a projection that maps a given spatial curve to a given planar curve. Our algorithm is based on projection criteria that reduce the projection problem to a certain modification of the equivalence problem of planar curves under affine and projective transformations. To solve the latter problem we make an algebraic adaptation of signature construction that has been used to solve the equivalence problems for smooth curves. We introduce a notion of a classifying set of rational differential invariants and produce explicit formulas for such invariants for the actions of the projective and the affine groups on the plane.

  3. Development of water quality objectives and management systems for the lower Athabasca River in the oil sands area

    Energy Technology Data Exchange (ETDEWEB)

    Noton, L. [Alberta Environment, Edmonton, AB (Canada). Water Quality; McEachern, P. [Alberta Environment, Edmonton, AB (Canada). Regional Environmental Management

    2004-07-01

    This paper addressed environmental concerns related to the increased oil sands activity along the lower Athabasca River in northeastern Alberta. The concerns include potential effects on water quality of the river even though wastewaters do not currently reach the Athabasca River, nor do they have any significant effects. However, as the industry expands, there is concern that releases of wastewater may increase significantly. A multi-stakeholder group called the Cumulative Environmental Management Association (CEMA) has addressed some of these environmental management issues in the Athabasca area by establishing a water quality task group that examines water quality protection and management activities. The task group intends to develop and recommend water quality objectives and management options on the lower Athabasca River. Their 4 part process includes: (1) defining the problem, (2) setting goals, (3) measuring performance, and (4) managing and adapting to potential impacts. The group has identified and defined about 35 water quality variables of potential concern. It has also identified the uses of water it wants to protect and intends to prevent the degradation of water quality. A plan for developing site specific water quality objectives has been established following a review of water quality guidelines. Performance will be measured using water quality models that simulate full development scenarios. The modelling work will be instrumental in designing management schemes for any potential impacts.

  4. Western Gas Sands Project. Status report, 1 September 1979-30 September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    This report summarizes progress of the government-sponsored projects directed toward increasing gas production from the low-permeability gas sands of the western United States. Bartlesville Energy Technology Center continued work on rock-fluid interaction and advanced logging techniques. Lawrence Livermore Laboratory continued experimental and theoretical work on hydraulic fracturing mechanics and analysis of well test data. Los Alamos Scientific Laboratory continued work on permeability and porosity determination of core samples and geological support studies. Sandia Laboratories continued work on their EGR Instrumentation and Diagnostic Program. Cyclic gas injection continued at Colorado Interstate Gas Company's Miller No. 1 and Sprague No. 1 wells. The DOE Well Test Facility is continuing to provide technical support to the Gas Research Institute/Rio Blanco Natural Gas MHF experiment. The Gas Producing Enterprises, Inc. Natural Buttes Unit wells continued to flow to sales. The Mitchell Energy Corporation Muse-Duke No. 1 was opened after a 28-day shut-in period. The hydraulic fracturing containment experiment continued for the Sandia-mineback program.

  5. Social Psychology of Facts, Processes and Projects. Object and Time

    Directory of Open Access Journals (Sweden)

    Gil, Adriana

    2006-05-01

    Full Text Available A dimension that must be considered, in the reflection that social sciences offer to society, is temporality. I would like to highlight the implicit idea of temporality within the different forms of psychosocial knowledge. In this article I propose that the different types of social psychology orientations can be situated on an axis of temporality which makes a distinction between those orientations that assume that the object of social knowledge is a fact (that is an object without temporality, being change a mere succession of independent facts, and those orientations that assume that their object is a process (that is an object in movement or perpetual change. Finally, I propose a potential social psychology of projects as an essential part of my own concept of what social psychology is

  6. National Assessment of Oil and Gas Project - Uinta-Piceance Province (020) Tar Sand Deposits

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Tar sands represent a significant source of hydrocarbons in the United States. Also known by several other names including bitumen-bearing rocks, natural asphalt,...

  7. Western gas sands project. Status report, July-August-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    The progress during July, August and September 1981 on increasing gas production from low permeability gas sands of the Western United States, is summarized in this edition of the WGSP Quarterly Status Report. During the quarter, CK GeoEnergy completed the field work in the Rifle Gap area near Rifle, Colorado, as well as the Draft Phase VI report covering the prognosis about reservoir geometry in the Multi-Well site area. The improved pressure coring system project, officially terminated Sept. 30. Accomplishments included increased capabilities for the pressure core barrel, improvements in the low invasion fluid plus various laboratory core intrusion studies and improved designs for PDC drill bits. At Lawrence Livermore National Laboratory, the P/sup 2/L/sup 2/ system described last quarter was evaluated further and the decision has been made to abandon further investigation. The Los Alamos National Laboratory Ceramics Materials Group is preparing to fabricate a ceramic sample with cylindrical pores of specified diameters. The NMR data on this type sample will contribute to a better understanding of the parameters affecting NMR relaxation rates in porous media. During the quarter, modifications were made in the operating and application software of the DOE Well Test Facility, which will support additions to the PDP-11/10 computer system. The Multi-Well Experiment well was spudded on Sept. 13 and by Sept. 30, total depth was 3358 ft. Coring operations are expected to begin at a depth of 4150 ft. At the Nevada Test Site, Sandia National Laboratories completed four additional coreholes for the Fluid Mechanics/ Proppant Transport Experiments.

  8. Western gas sands project. Status report, July-August-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    The progress during July, August and September 1981 on increasing gas production from low permeability gas sands of the Western United States, is summarized in this edition of the WGSP Quarterly Status Report. During the quarter, CK GeoEnergy completed the field work in the Rifle Gap area near Rifle, Colorado, as well as the Draft Phase VI report covering the prognosis about reservoir geometry in the Multi-Well site area. The improved pressure coring system project, officially terminated Sept. 30. Accomplishments included increased capabilities for the pressure core barrel, improvements in the low invasion fluid plus various laboratory core intrusion studies and improved designs for PDC drill bits. At Lawrence Livermore National Laboratory, the P/sup 2/L/sup 2/ system described last quarter was evaluated further and the decision has been made to abandon further investigation. The Los Alamos National Laboratory Ceramics Materials Group is preparing to fabricate a ceramic sample with cylindrical pores of specified diameters. The NMR data on this type sample will contribute to a better understanding of the parameters affecting NMR relaxation rates in porous media. During the quarter, modifications were made in the operating and application software of the DOE Well Test Facility, which will support additions to the PDP-11/10 computer system. The Multi-Well Experiment well was spudded on Sept. 13 and by Sept. 30, total depth was 3358 ft. Coring operations are expected to begin at a depth of 4150 ft. At the Nevada Test Site, Sandia National Laboratories completed four additional coreholes for the Fluid Mechanics/ Proppant Transport Experiments.

  9. Beach monitoring project Sand Key Phase II Beach nourishment program (North Redington Beach and Redington Shores) Post-Nourishment Report Part II Offshore Profiles and Wave Data

    OpenAIRE

    1989-01-01

    This study presents the third post-nourishment survey (January 1989) results for the Sand Key Phase II beach nourishment project carried out in June, 1988. The monitoring program to this beach nourishment project is a joint effort between the University of South Florida and University of Florida. The field surveys include a total of 26 profiles, encompassing approximately 3 miles of shoreline extending from DNR R-96 to R-1ll. The total calculated volume loss of sand in the n...

  10. Connecting onshore and offshore near-surface geology: Delaware's sand inventory project

    Science.gov (United States)

    Ramsey, K.W.; Jordan, R.R.; Talley, J.H.

    1999-01-01

    Beginning in 1988, the Delaware Geological Survey began a program to inventory on-land sand resources suitable for beach nourishment. The inventory included an assessment of the native beach textures using existing data and developing parameters of what would be considered suitable sand textures for Delaware's Atlantic beaches. An assessment of the economics of on-land sand resources was also conducted, and it was determined that the cost of the sand was competitive with offshore dredging costs. In addition, the sand resources were put into a geologic context for purposes of predicting which depositional environments and lithostratigraphic units were most likely to produce suitable sand resources. The results of the work identified several suitable on-land sand resource areas in the Omar and Beaverdam formations that were deposited in barrier-tidal delta and fluvial-estuarine environments, respectively. The identified on-land resources areas have not been utilized due to difficulties of truck transport and development pressures in the resource areas. The Delaware Geological Survey's participation in years 8, 9, and 10 of the Continental Margins Program was developed to extend the known resource areas onshore to offshore Delaware in order to determine potential offshore sand resources for beach nourishment. Years 8 and 9 involved primarily the collection of all available data on the offshore geology. These data included all seismic lines, surface grab samples, and cores. The data were filtered for those that had reliable locations and geologic information that could be used for geologic investigations. Year 10 completed the investigations onshore by construction of a geologic cross-section from data along the coast of Delaware from Cape Henlopen to Fenwick. This cross section identified the geologic units and potential sand resource bodies as found immediately along the coast. These units and resources are currently being extended offshore and tied to known and

  11. The PTF Orion Project: Eclipsing Binaries and Young Stellar Objects

    CERN Document Server

    van Eyken, Julian C; Rebull, Luisa M; Stauffer, John R; Akeson, Rachel L; Beichman, Charles A; Boden, Andrew F; von Braun, Kaspar; Gelino, Dawn M; Hoard, D W; Howell, Steve B; Kane, Stephen R; Plavchan, Peter; Ramírez, Solange V; Bloom, Joshua S; Cenko, S Bradley; Kasliwal, Mansi M; Kulkarni, Shrinivas R; Law, Nicholas M; Nugent, Peter E; Ofek, Eran O; Poznanski, Dovi; Quimby, Robert M; Grillmair, Carl J; Laher, Russ; Levitan, David; Mattingly, Sean; Surace, Jason A

    2011-01-01

    The Palomar Transient Factory (PTF) Orion project is an experiment within the broader PTF survey, a systematic automated exploration of the sky for optical transients. Taking advantage of the wide field of view available using the PTF camera at the Palomar 48" telescope, 40 nights were dedicated in December 2009-January 2010 to perform continuous high-cadence differential photometry on a single field containing the young (7-10Myr) 25 Ori association. The primary motivation for the project is to search for planets around young stars in this region. The unique data set also provides for much ancillary science. In this first paper we describe the survey and data reduction pipeline, and present initial results from an inspection of the most clearly varying stars relating to two of the ancillary science objectives: detection of eclipsing binaries and young stellar objects. We find 82 new eclipsing binary systems, 9 of which we are candidate 25 Ori- or Orion OB1a-association members. Of these, 2 are potential young...

  12. Modeling potential impacts of the Garrison Diversion Unit project on Sand Lake and Arrowwood National Wildlife Refuges: a feasibility analysis

    Science.gov (United States)

    Hamilton, David B.; Auble, Gregor T.; Farmer, Adrian H.; Roelle, James E.

    1987-01-01

    The Garrison Diversion Unit (GDU) of the Pick-Sloan Missouri Basin program was authorized in 1965, with the purpose of diverting Missouri River water to the James River for irrigation, municipal and industrial water supply, fish and wildlife habitat, recreation, and flood control. The project was reauthorized in 1986, with the specification that comprehensive studies be conducted to address a variety of issues. One of these ongoing studies addresses potential impacts of GDU construction and operation on lands of the National Wildlife Refuge (NWR) system, including Arrowwood and Sand Lake Refuges (the Refuges) on the James River. A number of concerns at these Refuges have been identified; the primary concerns addressed in this report include increased winter return flows, which would limit control of rough fish; increased turbidity during project construction, which would decrease production of sago pondweed; and increased water level fluctuations in the late spring and early summer, which would destroy the nests of some over-water nesting birds. The facilitated workshop described in this report was conducted February 18-20, 1987, under the joint sponsorship of the U.S. Bureau of Reclamation, the U.S. Fish and Wildlife Service, and the North Dakota Game and Fish Department. The primary objectives of the workshop were to evaluate the feasibility of using simulation modeling techniques to estimate GDU impacts on Arrowwood and Sand Lake Refuges and to suggest enhancements to the James River Refuge monitoring program. The workshop was structured around the formulation of four submodels: a Hydrology and Water Quality submodel to simulate changes in Refuge pool elevations, turnover rates, and water quality parameters (e.g., total dissolved solids, turbidity, dissolved oxygen, nutrients, water temperature, pesticides) due to GDU construction and operation; a Vegetation submodel to simulate concomitant changes in wetland communities (e.g., sago pondweed, wet meadows, deep

  13. Initial spreading of a mega feeder nourishment : Observations of the Sand Engine pilot project

    NARCIS (Netherlands)

    de Schipper, Matthieu A.; de Vries, Sierd; Ruessink, Gerben|info:eu-repo/dai/nl/169093360; de Zeeuw, Roeland C.; Rutten, Jantien; van Gelder-Maas, Carola; Stive, Marcel J F

    2016-01-01

    Sand nourishments are a widely applied technique to increase beach width for recreation or coastal safety. As the size of these nourishments increases, new questions arise on the adaptation of the coastal system after such large unnatural shapes have been implemented. This paper presents the initial

  14. Klenot Project - Near Earth Objects Follow-Up Program

    Science.gov (United States)

    Tichý, Miloš; Tichá, Jana; Kočer, Michal

    2016-01-01

    NEO research is a great challenge just now - for science, for exploration and for planetary defence. Therefore NEO discoveries, astrometric follow-up, orbit computations as well as physical studies are of high interest both to science community and humankind. The KLENOT Project of the Klet Observatory, South Bohemia, Czech Republic pursued the confirmation, early follow-up, long-arc follow-up and recovery of Near Earth Objects since 2002. Tens of thousands astrometric measurements helped to make inventory of NEOs as well as to understand the NEO population. It ranked among the world most prolific professional NEO follow-up programmes during its first phase from 2002 to 2008. The fundamental improvement of the 1.06-m KLENOT Telescope was started in autumn 2008. The new computer controlled paralactic mount was built to substantially increase telescope-time efficiency, the number of observations, their accuracy and limiting magnitude. The testing observations of the KLENOT Telescope Next Generation (NG) were started in October 2011. The new more efficient CCD camera FLI ProLine 230 was installed in summer 2013. The original Klet Software Package has been continually upgraded over the past two decades of operation. Along with huge hardware changes we have decided for essential changes in software and the whole KLENOT work-flow. Using the current higher computing power available, enhancing and updating our databases and astrometry program, the core of our software package, will prove highly beneficial. Moreover, the UCAC4 as the more precise astrometric star catalog was implemented. The modernized KLENOT System was put into full operation in September 2013. This step opens new possibilities for the KLENOT Project, the long-term European Contribution to Monitoring and Cataloging Near Earth Objects. KLENOT Project Goals are confirmatory observations of newly discovered fainter NEO candidates, early follow-up of newly discovered NEOs, long-arc follow-up astrometry of NEOs

  15. The OASE project: Object-based Analysis and Seamless prediction

    Science.gov (United States)

    Troemel, Silke; Wapler, Kathrin; Bick, Theresa; Diederich, Malte; Deneke, Hartwig; Horvath, Akos; Senf, Fabian; Simmer, Clemens; Simon, Juergen

    2013-04-01

    The research group on Object-based Analysis and SEamless prediction (OASE) is part of the Hans Ertel Centre for Weather Research (HErZ). The group consists of scientists at the Meteorological Institute, University of Bonn, the Leibniz-Institute for Tropospheric Research in Leipzig and the German Weather Service. OASE addresses seamless prediction of convective events from nowcasting to daily predictions by combining radar/satellite compositing and tracking with high-resolution model-based ensemble generation and prediction. While observation-based nowcasting provides good results for lead times between 0-1 hours, numerical weather prediction addresses lead times between 3-21 hours. Especially the discontinuity between 1-3 hours needs to be addressed. Therefore a central goal of the project is a near real-time high-resolved unprecedented data base. A radar and satellite remote sensing-driven 3D observation-microphysics composite covering Germany, currently under development, contains gridded observations and estimated microphysical quantities. Observations and microphysics are intertwined via forward operators and estimated inverse relations, which also provide uncertainties for model ensemble initialisations. The lifetime evolution of dynamics and microphysics in (severe) convective storms is analysed based on 3D scale-space tracking. An object-based analysis condenses the information contained in the dynamic 3D distributions of observables and related microphysics into descriptors, which will allow identifying governing processes leading to the formation and evolution of severe weather events. The object-based approach efficiently characterises and quantifies the process structure and life cycles of severe weather events, and facilitates nowcasting and the generation and initialisation of model prediction ensembles. Observation-based nowcasting will exploit the dual-composite based 3D feature detection and tracking to generate a set of predictions (observation

  16. The Significance of Tax Incentives in Attracting Foreign Investment: Lessons from the Canadian Oil Sands Project

    Science.gov (United States)

    Febriana, Restika

    Tax incentives have been used by countries to stimulate foreign investment. Few countries doubt the effectiveness of tax incentives. Canada and Indonesia are among the many countries that offer tax incentives to attract investors. While Canada has a long history of using tax incentives to foster the development of the Alberta oil sands, Indonesia is just embarking on this strategy, especially in promoting foreign investment in remote areas. Drawing on the Canadian development of the Alberta oil sands, this thesis asks what lessons Indonesia can learn from that experience in relying on tax incentives to develop the industry. This thesis acknowledges that there are many important differences between Canada and Indonesia. Since most countries speak of using tax incentives to finance their petroleum industries, it is worth examining at least one instance of that strategy and see whether Indonesia can extract any thing of value from this examination.

  17. KLENOT Project - Near Earth Objects Follow-up Program

    Science.gov (United States)

    Tichy, Milos; Ticha, Jana; Kocer, Michal; Tichy, Milos

    2015-08-01

    Near Earth Object (NEO) research is important not only as a great challenge for science but also as an important challenge for planetary defense. Therefore NEO discoveries, astrometric follow-up, orbit computations as well as physical studies are of high interest both to science community and humankind.The KLENOT Project of the Klet Observatory, South Bohemia, Czech Republic pursued the confirmation, early follow-up, long-arc follow-up and recovery of NEOs since 2002. Tens of thousands astrometric measurements helped to make inventory of NEOs as well as to understand the NEO distribution. It ranked among the world most prolific professional NEO follow-up programmes during its first phase from 2002 to 2008.The fundamental improvement of the 1.06-m KLENOT Telescope was started in autumn 2008. The new computer controlled paralactic mount was built to substantially increase telescope-time efficiency, the number of observations, their accuracy and limiting magnitude. The testing observations of the KLENOT Telescope Next Generation were started in October 2011. The new more efficient CCD camera FLI ProLine 230 was installed in summer 2013.The original Klet Software Package has been continually upgraded over the past two decades of operation.Both the system and strategy for the NEO follow-up observation used in the framework of the KLENOT Project are described here, including methods for selecting useful and important targets for NEO follow-up astrometry.The modernized KLENOT System was put into full operation in September 2013. More than 8000 of minor planet and comet astrometric positions including NEA measurements were published from September 2013 to February 2015.The 1.06-m KLENOT telescope is still the largest telescope in continental Europe used exclusively for observations of asteroids and comets. Full observing time is dedicated to the KLENOT team. Considering our results and long-time experience obtained at the Klet Observatory, we have the large potential to

  18. 76 FR 23642 - Culturally Significant Objects Imported for Exhibition Determinations: “Projects 95: Runa Islam”

    Science.gov (United States)

    2011-04-27

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Culturally Significant Objects Imported for Exhibition Determinations: ``Projects 95: Runa Islam'' SUMMARY..., I hereby determine that the objects to be included in the exhibition ``Projects 95: Runa...

  19. Collaborative Object Framework for Adaptive System Optimization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TeamVision proposes that we research the feasibility of incorporating an adaptive object based optimization system into an existing multi-user object oriented...

  20. Beach Nourishment Techniques. Report 3. Typical U.S. Beach Nourishment Projects Using Offshore Sand Deposits.

    Science.gov (United States)

    1981-05-01

    Cooperative Beach Erosion Control Project at Presque Isle Peninsula, Erie , Pennsylvania ," Buffalo, N. Y. U. S. Army Engineer District, Charleston. 1963 (Mar...104 Presque Isle , Pa .. .. ..................... 109 REFERENCES .. ............................ 115 2A BEACH NOURISHMENT...RIVER COUNTY, FL T PRESQUE ISLE . PA Figure 1. Beach fill projects location map ...../ ...... studies have been authorized, or which are publicly owned

  1. STARwatch to Deliver Objective Sleep Measures for Spaceflight Operations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will achieve a wrist-worn actigraphy device called STARwatch, designed specifically for space exploration environments. It will provide a minimally...

  2. Classification of Land Use on Sand-Dune Topography by Object-Based Analysis, Digital Photogrammetry, and GIS Analysis in the Horqin Sandy Land, China

    Directory of Open Access Journals (Sweden)

    Takafumi Miyasaka

    2016-07-01

    Full Text Available Previous field research on the Horqin Sandy Land (China, which has suffered from severe desertification during recent decades, revealed how land use on a sand-dune topography affects both land degradation and restoration. This study aimed to depict the spatial distribution of local land use in order to shed more light on previous field findings regarding policies on a broader scale. We performed the following analyses with Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM and Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2 images of Advanced Land Observing Satellite (ALOS: (1 object-based classification to discriminate preliminary classification of land-use types that were approximately differentiated by ordinary pixel-based analysis with spectral information; (2 digital photogrammetry to generate a digital surface model (DSM with adequately high accuracy to represent undulating sand-dune topography; (3 geographic information system (GIS analysis to classify major topographic types with the digital surface model (DSM; and (4 overlay of the two classification results to depict the local land-use types. The overall accuracies of the object-based and GIS-based classifications were high, at 93% (kappa statistic: 0.84 and 89% (kappa statistic: 0.81, respectively. The resultant local land-use map represents areas covered in previous field studies, showing where and how land degradation and restoration are likely to occur. This research can contribute to future environmental surveys, models, and policies in the study area.

  3. Collaborative Object Framework for Adaptive System Optimization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is to combine traditional and cutting edge optimization techniques into an existing powerful object based organic enterprise decision network...

  4. SEAFOODplus: objectives, outputs, progress since the completion of the project

    DEFF Research Database (Denmark)

    Børresen, Torger

    , and the effect continued after the test period of eight weeks. A survey among close to 5,000 consumers in five European countries showed that seafood safety is ranked as the most important, and consumers trusted information given my medical doctors most. This would indicate that healthcare personnel should....... In one of the SEAFOODplus projects in the safety area a new bacterium was discovered that was able to decarboxylate histidine even when the fish was stored in ice. New methods to avoid this were developed within the project. A new seafood product was developed containing plant fibres with antioxidants...

  5. Sand fly (Diptera, Psychodidae, Phlebotominae) abundance and diversity in areas affected by the São Francisco River transposition project in Ceará State, Brazil.

    Science.gov (United States)

    Dos Santos Silva, Júlia; Caranha, Lindemberg; Moura Santos, Fabrício Kássio; Dos Santos, Antonio Pereira; Rodrigues da Silva, Luiz Osvaldo; Ferreira Rangel, Elizabeth

    2017-08-29

    Entomological surveillance of sand fly vectors was carried out to support leishmaniasis prevention and control measures in areas affected by the São Francisco River Transposition Project. Sand flies were collected monthly between May 2011 and December 2014 in seven municipalities: Missão Velha, Brejo Santo, Lavras da Mangabeira, Iguatu, Mauriti, Jaguaribe and Jaguaretama, in dwellings, peridomicile and forest areas for three consecutive days, for a period of 12 h each day (18:00 to 06:00 h). Differences in species composition between sites were tested with Shannon's diversity index, the similarity between habitats was estimated by the Sørensen's qualitative similarity index and, for the most abundant species in each municipality, a standardized index of species abundance was applied. The influence of climatic factors on sand fly population densities was analyzed using Spearman's correlation coefficients. A total of 214,213 sand fly specimens belonging to 18 species were captured. The most abundant species in all municipalities was Lutzomyia longipalpis (Lutz & Neiva, 1912). The municipalities of Mauriti and Missão Velha stand out in terms of high species richness, with the latter exhibiting the greatest diversity. The number of sand flies in the Iguatu, Jaguaribe and Jaguaretama municipality was higher during the rainy months, whereas the populations declined in the drier months; the sand fly population density in other municipalities (Missão Velha, Brejo Santo, Lavras de Mangabeira and Mauriti) showed negative correlation with rainfall. This study confirms the presence of several Leishmania spp. vectors in the seven municipalities affected by the São Francisco River Transposition Project, with Lu. longipalpis being the most abundant species at all study sites. Vector populations in these municipalities should be monitored, ultimately to assess the associations between environmental changes and sand fly population dynamics and leishmaniasis transmission

  6. An Objective Evaluation of Determinants of Construction Project Success.

    Science.gov (United States)

    1986-12-01

    Management Institute. pp. 13-2 1. 6 6p 7 or all parties to a project. A central theme throughout many of the articles is the different measures of success...estimated ’for low or negative factor levels is less than (or greater than) zero. .HEDULE PERFORMANCE FACTOR BETTER LOWER % DIFF SIGN MEASURE LL LEL EBM

  7. SEAFOODplus: objectives, outputs, progress since the completion of the project

    DEFF Research Database (Denmark)

    Børresen, Torger

    , aquaculture and traceability. Integrating research from so many disciplines created many new solutions to problems observed within seafood production and marketing. As time is limited in this presentation only a few examples of the most interesting results will be highlighted. Among the three projects within...

  8. Automated Mulitple Object Optical Tracking and Recognition System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — OPTRA proposes to develop an optical tracking system that is capable of recognizing and tracking up to 50 different objects within an approximately 2 degree x 3...

  9. Nylsvley - South African Savanna ecosystem project: objectives, organisation and research programme

    CSIR Research Space (South Africa)

    Huntley, BJ

    1978-03-01

    Full Text Available A description of the objectives, organization and research programme of the Savanna Ecosystem Project being undertaken at Nylsvley in the northern Transvaal is presented. The project is a cooperative multi-disciplinary study of the structure...

  10. Space Object and Light Attribute Rendering (SOLAR) Projection System

    Science.gov (United States)

    2017-05-08

    systems operating in the visual spectrum. It is a cost effective way to rapidly validate algorithms and imaging systems and establishes a systematic...carried out. Primary demonstrations included the projection of a start field and the visual identification of stars. • December 2016: The SOLAR system...to undergraduate research, Prof. Majji and Prof. Singla currently teach a special class on the design and development of UAVs, tracking systems and

  11. Study of Multistage Project Risk Identification-Assessment Process Based on Objective Orientation

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Risk management of projects is about the real time ev aluation and making of decisions proactively in order to maximize the probabilit y of achieving or surpassing the targets set for project objectives. Project objective generally includes three elements: time, cost, quality. Risk occurrin g in the projects will affect these three factors to some various degrees in the end. There are different emphases in each stage and integrated balanced goals b etween the three factors. A large complex engineering ...

  12. Project scheduling: A multi-objective evolutionary algorithm that optimizes the effectiveness of human resources and the project makespan

    Science.gov (United States)

    Yannibelli, Virginia; Amandi, Analía

    2013-01-01

    In this article, the project scheduling problem is addressed in order to assist project managers at the early stage of scheduling. Thus, as part of the problem, two priority optimization objectives for managers at that stage are considered. One of these objectives is to assign the most effective set of human resources to each project activity. The effectiveness of a human resource is considered to depend on its work context. The other objective is to minimize the project makespan. To solve the problem, a multi-objective evolutionary algorithm is proposed. This algorithm designs feasible schedules for a given project and evaluates the designed schedules in relation to each objective. The algorithm generates an approximation to the Pareto set as a solution to the problem. The computational experiments carried out on nine different instance sets are reported.

  13. CDC Periodontal Disease Surveillance Project: background, objectives, and progress report.

    Science.gov (United States)

    Eke, Paul I; Genco, Robert J

    2007-07-01

    This supplement contains papers presented at the 2006 International Association of Dental Research (IADR) symposium entitled "Development of Self-Reported Measures for Population-Based Surveillance of Periodontitis." These papers highlight activities of an independent periodontal disease surveillance workgroup convened by the Division of Oral Health (DOH), Centers for Disease Control and Prevention (CDC), in collaboration with the American Academy of Periodontology, to examine the feasibility of using self-reported measures for population-based surveillance of periodontal disease in the United States. This workgroup was convened in 2003 as part of a CDC periodontal disease surveillance project.

  14. Fontainebleau Sand

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane

    2006-01-01

    The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand.......The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand....

  15. Genetic algorithm-based multi-objective model for scheduling of linear construction projects

    OpenAIRE

    Senouci, Ahmed B.; Al-Derham, H.R.

    2007-01-01

    This paper presents a genetic algorithm-based multi-objective optimization model for the scheduling of linear construction projects. The model allows construction planners to generate and evaluate optimal/near-optimal construction scheduling plans that minimize both project time and cost. The computations in the present model are organized in three major modules. A scheduling module that develops practical schedules for linear construction projects. A cost module that computes the project's c...

  16. A Multi-objective model for selection of projects to finance new enterprise SMEs in Colombia

    Directory of Open Access Journals (Sweden)

    J.R. Coronado-Hernández

    2011-10-01

    Full Text Available Purpose: This paper presents a multi-objective programming model for selection of Projects for Financing New Enterprise SMEs in Colombia with objectivity and transparency in every call. Approach: The model has four social objectives, subject to constraint budget and to the requirements of every summons. The resolution procedure for the model is based on principles of goal programming. Findings: Selection projects subject to the impact within the country. Research limitations: The selection of the projects is restricted by a legal framework, the terms of reference and the budget of the summons. Practical implications: The projects must be viable according to the characteristics of every summons. Originality/value: The suggested model offers an alternative for entities that need to evaluate projects of co-financing for the managerial development of the SMEs with more objectivity and transparency in the assignment of resources.

  17. Translation of environmental leadership objectives into routine project execution for the uranium mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Breker, J.; Studer, T.; Voykin, N.; Berg, B., E-mail: jeremy_breker@cameco.com [Cameco Corp., Saskatoon, SK (Canada); Scott, W. [Wardrop Engineering, Thunder Bay, ON (Canada)

    2010-07-01

    Cameco Corporation (Cameco) aligns its social and environmental responsibilities with its vision, mission and values. Environmental Leadership is established as a corporate objective that emphasizes the triple-bottom-line and a systematic approach to understanding environmental, social and economic issues, risks and opportunities. These are ingrained in the project culture, systems and processes and used to influence solutions derived by the project teams to achieve Cameco's objectives. This paper traces the organizational objectives from the early stages of a project through to implementation and turn over to Operations. A case study is used to demonstrate how an asset is influenced by Cameco's strategy. (author)

  18. 3D Projection on Physical Objects: Design Insights from Five Real Life Cases

    DEFF Research Database (Denmark)

    Dalsgaard, Peter; Halskov, Kim

    2011-01-01

    3D projection on physical objects is a particular kind of Augmented Reality that augments a physical object by projecting digital content directly onto it, rather than by using a mediating device, such as a mobile phone or a head- mounted display. In this paper, we present five cases in which we...... have developed installations that employ 3D projection on physical objects. The installations have been developed in collaboration with external partners and have been put into use in real-life settings such as museums, exhibitions and interaction design laboratories. On the basis of these cases, we...

  19. Analysis of projection geometry for few-view reconstruction of sparse objects.

    Science.gov (United States)

    Henri, C J; Collins, D L; Peters, T M

    1993-01-01

    In this paper certain projections are examined as to why they are better than others when used to reconstruct sparse objects from a small number of projections. At the heart of this discussion is the notion of "consistency," which is defined as the agreement between the object's 3-D structure and its appearance in each image. It is hypothesized that after two or more projections have been obtained, it is possible to predict how well as subsequent view will perform in terms of resolving ambiguities in the object reconstructed from only the first few views. The prediction is based on a step where views of the partial reconstruction are simulated and the use of consistency to estimate the effectiveness of a given projection is exploited. Here some freedom is presumed to acquire arbitrary as opposed to predetermined views of the object. The principles underlying this approach are outlined, and experiments are performed to illustrate its use in reconstructing a realistic 3-D model. Reflecting an interest in reconstructing cerebral vasculature from angiographic projections, the experiments employ simulations based on a 3-D wireframe model derived from an internal carotid arteriogram. It is found that for such an object, the predictions can be improved significantly by introducing a correction to account for the degree to which the object possesses some symmetry in shape. For objects sufficiently sparse, this correction is less important. It is concluded that when the number of projections is limited, it may be possible to favorably affect the reconstruction process in this manner.

  20. Real-Time Projection-Based Augmented Reality System for Dynamic Objects in the Performing Arts

    National Research Council Canada - National Science Library

    Jaewoon Lee; Yeonjin Kim; Myeong-Hyeon Heo; Dongho Kim; Byeong-Seok Shin

    2015-01-01

    ... say real-time projection-based augmented reality system for dynamic objects in performing arts. We installed the sets on a stage for live performance, and rehearsed particular scenes of a musical...

  1. Optimization design of a gating system for sand casting aluminium A356 using a Taguchi method and multi-objective culture-based QPSO algorithm

    Directory of Open Access Journals (Sweden)

    Wen-Jong Chen

    2016-04-01

    Full Text Available This article combined Taguchi method and analysis of variance with the culture-based quantum-behaved particle swarm optimization to determine the optimal models of gating system for aluminium (Al A356 sand casting part. First, the Taguchi method and analysis of variance were, respectively, applied to establish an L27(38 orthogonal array and determine significant process parameters, including riser diameter, pouring temperature, pouring speed, riser position and gating diameter. Subsequently, a response surface methodology was used to construct a second-order regression model, including filling time, solidification time and oxide ratio. Finally, the culture-based quantum-behaved particle swarm optimization was used to determine the multi-objective Pareto optimal solutions and identify corresponding process conditions. The results showed that the proposed method, compared with initial casting model, enabled reducing the filling time, solidification time and oxide ratio by 68.14%, 50.56% and 20.20%, respectively. A confirmation experiment was verified to be able to effectively reduce the defect of casting and improve the casting quality.

  2. Relevance and Applicability of Multi-objective Resource Constrained Project Scheduling Problem: Review Article

    Directory of Open Access Journals (Sweden)

    V. Oladokun

    2011-12-01

    Full Text Available Resource-Constrained Project Scheduling Problem (RCPSP is a Non Polynomial (NP - Hard optimization problem that considers how to assign activities to available resources in order to meet predefined objectives. The problem is usually characterized by precedence relationship between activities with limited capacity of renewable resources. In an environment where resources are limited, projects still have to be finished on time, within the approved budget and in accordance with the preset specifications. Inherently, these tend to make RCPSP, a multi-objective problem. However, it has been treated as a single objective problem with project makespan often recognized as the most relevant objective. As a result of not understanding the multi-objective dimension of some projects, where these objectives need to be simultaneously considered, distraction and conflict of interest have ultimately lead to abandoned or totally failed projects. The aim of this article is to holistically review the relevance and applicability of multi-objective performance dimension of RCPSP in an environment where optimal use of limited resources is important.

  3. Projectively invariant objects and the index of the group of affine transformations in the group of projective transformations

    OpenAIRE

    Matveev, Vladimir S.

    2016-01-01

    The paper is grown from the lecture course "Metric projective geometry" which I hold at the summer school "Finsler geometry with applications" at Karlovassi, Samos, in 2014, and at the workshop before the 8th seminar on Geometry and Topology of the Iranian Mathematical society at the Amirkabir University of Technology in 2015. The goal of this lecture course was to show how effective projectively invariant objects can be used to solve natural and named problems in differential geometry, and t...

  4. Electro-holography display using computer generated hologram of 3D objects based on projection spectra

    Science.gov (United States)

    Huang, Sujuan; Wang, Duocheng; He, Chao

    2012-11-01

    A new method of synthesizing computer-generated hologram of three-dimensional (3D) objects is proposed from their projection images. A series of projection images of 3D objects are recorded with one-dimensional azimuth scanning. According to the principles of paraboloid of revolution in 3D Fourier space and 3D central slice theorem, spectra information of 3D objects can be gathered from their projection images. Considering quantization error of horizontal and vertical directions, the spectrum information from each projection image is efficiently extracted in double circle and four circles shape, to enhance the utilization of projection spectra. Then spectra information of 3D objects from all projection images is encoded into computer-generated hologram based on Fourier transform using conjugate-symmetric extension. The hologram includes 3D information of objects. Experimental results for numerical reconstruction of the CGH at different distance validate the proposed methods and show its good performance. Electro-holographic reconstruction can be realized by using an electronic addressing reflective liquid-crystal display (LCD) spatial light modulator. The CGH from the computer is loaded onto the LCD. By illuminating a reference light from a laser source to the LCD, the amplitude and phase information included in the CGH will be reconstructed due to the diffraction of the light modulated by the LCD.

  5. Overview of the earth mounded concrete bunker prototype license application project: Objectives and approach

    Energy Technology Data Exchange (ETDEWEB)

    Conner, J.E. [EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.

    1989-11-01

    This paper presents an overview of the objectives and approach taken in developing the Earth-mounded Concrete Bunker Prototype License Application Project. The Prototype License Application Project was initiated by the Department of Energy`s National Low-Level Waste Management Program in early 1987 and completed in November 1988. As part of this project a prototype safety analysis report was developed. The safety analysis report evaluates the licensibility of an earth-mounded concrete bunker for a low-level radioactive waste (LLW) disposal facility located on a hypothetical site in the northeastern United States. The project required approximately five person-years and twenty months to develop.

  6. Overview of the earth mounded concrete bunker prototype license application project: Objectives and approach

    Energy Technology Data Exchange (ETDEWEB)

    Conner, J.E. [EG and G Idaho, Inc., Idaho Falls, ID (United States). Idaho National Engineering Lab.

    1989-11-01

    This paper presents an overview of the objectives and approach taken in developing the Earth-mounded Concrete Bunker Prototype License Application Project. The Prototype License Application Project was initiated by the Department of Energy`s National Low-Level Waste Management Program in early 1987 and completed in November 1988. As part of this project a prototype safety analysis report was developed. The safety analysis report evaluates the licensibility of an earth-mounded concrete bunker for a low-level radioactive waste (LLW) disposal facility located on a hypothetical site in the northeastern United States. The project required approximately five person-years and twenty months to develop.

  7. 3D Projection on Physical Objects: Design Insights from Five Real Life Cases

    DEFF Research Database (Denmark)

    Dalsgaard, Peter; Halskov, Kim

    2011-01-01

    3D projection on physical objects is a particular kind of Augmented Reality that augments a physical object by projecting digital content directly onto it, rather than by using a mediating device, such as a mobile phone or a head- mounted display. In this paper, we present five cases in which we...... have developed installations that employ 3D projection on physical objects. The installations have been developed in collaboration with external partners and have been put into use in real-life settings such as museums, exhibitions and interaction design laboratories. On the basis of these cases, we...... present and discuss three central design insights concerning new potentials for well-known 3D effects, dynamics between digital world and physical world, and relations between object, content and context....

  8. Real-Time Projection-Based Augmented Reality System for Dynamic Objects in the Performing Arts

    Directory of Open Access Journals (Sweden)

    Jaewoon Lee

    2015-02-01

    Full Text Available This paper describes the case study of applying projection-based augmented reality, especially for dynamic objects in live performing shows, such as plays, dancing, or musicals. Our study aims to project imagery correctly inside the silhouettes of flexible objects, in other words, live actors or the surface of actor’s costumes; the silhouette transforms its own shape frequently. To realize this work, we implemented a special projection system based on the real-time masking technique, that is to say real-time projection-based augmented reality system for dynamic objects in performing arts. We installed the sets on a stage for live performance, and rehearsed particular scenes of a musical. In live performance, using projection-based augmented reality technology enhances technical and theatrical aspects which were not possible with existing video projection techniques. The projected images on the surfaces of actor’s costume could not only express the particular scene of a performance more effectively, but also lead the audience to an extraordinary visual experience.

  9. Namibia : triaxial test on sand

    DEFF Research Database (Denmark)

    Steenfelt, Jørgen S.; Jacobsen, Kim P.

    In connection with a harbour project the friction angle of a fine sand is required. On Friday 13 March 1998 the Danish Geotechnical Institute (DGI) delivered app. 2.5 kg sand for testing at the Geotechnical Engineering Laboratory, Aalborg University. The present Data Report summarises the results...

  10. Phase retrieval with the reverse projection method in the presence of object's scattering

    Science.gov (United States)

    Wang, Zhili; Gao, Kun; Wang, Dajiang

    2017-08-01

    X-ray grating interferometry can provide substantially increased contrast over traditional attenuation-based techniques in biomedical applications, and therefore novel and complementary information. Recently, special attention has been paid to quantitative phase retrieval in X-ray grating interferometry, which is mandatory to perform phase tomography, to achieve material identification, etc. An innovative approach, dubbed ;Reverse Projection; (RP), has been developed for quantitative phase retrieval. The RP method abandons grating scanning completely, and is thus advantageous in terms of higher efficiency and reduced radiation damage. Therefore, it is expected that this novel method would find its potential in preclinical and clinical implementations. Strictly speaking, the reverse projection method is applicable for objects exhibiting only absorption and refraction. In this contribution, we discuss the phase retrieval with the reverse projection method for general objects with absorption, refraction and scattering simultaneously. Especially, we investigate the influence of the object's scattering on the retrieved refraction signal. Both theoretical analysis and numerical experiments are performed. The results show that the retrieved refraction signal is the product of object's refraction and scattering signals for small values. In the case of a strong scattering, the reverse projection method cannot provide reliable phase retrieval. Those presented results will guide the use of the reverse projection method for future practical applications, and help to explain some possible artifacts in the retrieved images and/or reconstructed slices.

  11. Designing pilot projects as boundary objects a Brazilian case study in the promotion of sustainable design

    CERN Document Server

    Zurlo, Francesco

    2016-01-01

    This book describes a collaborative Design Pilot Project held in Brazil (called MODU.Lares) involving micro and small enterprises and other actors in the furniture sector. The experience was based on an action research method and evaluated by using a tool, in order to assess the value of pilot project as a boundary object capable of fostering innovation and sustainability. The impact of the Design Pilot Project in triggering change in a fragmented local system with a poor environmental and social record, as well as management and innovation issues, were assessed with the help of the same tool, taking into account environmental, technological, economic, sociocultural, and organizational indicators. The collaborative network established was chiefly based on four elements: prototypes, meetings, exhibitions and the Pilot Project (as an overall process). The results indeed demonstrate that a Design Pilot Project can be a valid instrument for establishing a collaborative environment that promotes sustainability an...

  12. Research on the Pueblo culture settlement system from the North American Southwest: Results of the Sand Canyon-Castle Rock Community Archaeological Project

    Directory of Open Access Journals (Sweden)

    Radosław Palonka

    2015-02-01

    Full Text Available Investigating ancient Pueblo culture from the North American Southwest is challenging task involving cooperationof scientists from different disciplines, mainly archaeology, history, anthropology, and linguistics. There isalso a large body of information in native oral tradition that has enormous potential for enriching our knowledgeof the past and our understanding of how Pueblo societies functioned. The paper focuses on one of the mostintriguing periods of Pueblo Indians culture, the thirteenth century A.D., in the central Mesa Verde region onpresent Utah-Colorado border. It was the time of great development of Pueblo societies and close to the centuryfall of the settlement system and total migration from the area to what is present-day Arizona and New Mexico.One of the projects in the area is Sand Canyon-Castle Rock Community Archaeological Project. The projectfocuses on analysis and reconstruction of the settlement structure and socio-cultural changes that took placein Pueblo culture during the thirteenth century A.D. in Sand Canyon, Rock Creek Canyon and several othersmall canyons located in one subarea within the Mesa Verde region, Colorado.

  13. Casting Ductile Iron in Layer Moulds Made from Ecological Sands

    Directory of Open Access Journals (Sweden)

    M. Rączka

    2012-09-01

    Full Text Available The article contains the results of tests performed under the target project in Hardtop Foundry Charsznica.The objective of the tests and studies was to develop a technology of making high-quality ductile iron castings, combined witheffective means of environmental protection. The studies presented in this article related to castings weighing from 1 to 300 kg made from ductile iron of grades 400-15 and 500-7, using two-layer moulds, where the facing and core sand was the sand with an alkaline organic binder, while backing sand was the sand with an inorganic geopolymer binder.A simplified method of sand reclamation was applied with possible reuse of the reclaim as an addition to the backing sand. The castiron spheroidising treatment and inoculation were selected taking into account the specific conditions of Hardtop Foundry. A pilot batch of castings was made, testing the gating and feeding systems and using exothermic sleeves on risers. The study confirmed the validity of the adopted concept of making ductile iron castings in layer moulds, while maintaining the content of sand with an organic binder at a level of maximum 15%.

  14. Recovering the Shape of Planar Object Depicted by a Line Drawing under Axonometric Projection

    Institute of Scientific and Technical Information of China (English)

    CHUJun; GAOMan-tun

    2005-01-01

    A new approach is proposed for automatically creating B-rep models of a three-dimensional planar object from a line drawing depicting the object under orthographically axonometric projection. A new line parameterization that satisfies the uniqueness, boundedness and uniformness for representing lines in 2D and 3D space is given. According to the location relation between lines and planes of object depicted by the line drawing, some constraints about object's 3D information are produced and a linear system based on those constraints is established.3D information of a planar body can be obtained by solving the linear system. It is proved that,during the processing, there existed at least four degrees of freedom. It is more convenient to use information about lines and planes instead of points and planes for computer vision and intelligent CAD systems to interpret line drawings of planar objects.

  15. Quality assurance plan for the Objective Supply Capability Adaptive Redesign (OSCAR) project

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, K.A.; Rasch, K.A.; Reid, R.W.

    1996-11-01

    This document establishes the Quality Assurance Plan (QAP) for the National Guard Bureau Objective Supply Capability Adaptive Redesign (OSCAR) project activities under the Oak Ridge National Laboratory (ORNL) management. It defines the requirements and assigns responsibilities for ensuring, with a high degree of confidence, that project objectives will be achieved as planned. The QAP outlined herein is responsive to and meets the Quality Assurance Program standards for the U.S. Department of Energy (DOE), Lockheed Martin Energy Research Corporation and ORNL and the ORNL Computing, Robotics, and Education Directorate (CRE). This document is intended to be in compliance with DOE Order 5700.6C, Quality Assurance Program, and the ORNL Standard Practice Procedure, SPP X-QA-8, Quality Assurance for ORNL Computing Software. This standard allows individual organizations to apply the stated requirements in a flexible manner suitable to the type of activity involved. Section I of this document provides an introduction to the OSCAR project QAP; Sections 2 and 3 describe the specific aspects of quality assurance as applicable to the OSCAR project. Section 4 describes the project approach to risk management. The Risk Management Matrix given in Appendix A is a tool to assess, prioritize, and prevent problems before they occur. Therefore, the matrix will be reviewed and revised on a periodic basis.

  16. The Object Projection Feature Estimation Problem in Unsupervised Markerless 3D Motion Tracking

    CERN Document Server

    Quesada, Luis

    2011-01-01

    3D motion tracking is a critical task in many computer vision applications. Existing 3D motion tracking techniques require either a great amount of knowledge on the target object or specific hardware. These requirements discourage the wide spread of commercial applications based on 3D motion tracking. 3D motion tracking systems that require no knowledge on the target object and run on a single low-budget camera require estimations of the object projection features (namely, area and position). In this paper, we define the object projection feature estimation problem and we present a novel 3D motion tracking system that needs no knowledge on the target object and that only requires a single low-budget camera, as installed in most computers and smartphones. Our system estimates, in real time, the three-dimensional position of a non-modeled unmarked object that may be non-rigid, non-convex, partially occluded, self occluded, or motion blurred, given that it is opaque, evenly colored, and enough contrasting with t...

  17. Knowledge sharing in construction partnering projects - redundancy, boundary objects and brokers

    DEFF Research Database (Denmark)

    Koch, Christian; Thuesen, Christian

    2013-01-01

    common assignment of meaning, brokers (e.g., design managers), boundary objects (e.g., drawings) and arenas (e.g., meetings). The paper presents an ethnographic case study of a project partnership between engineers, architects and contractors in construction using the partnering concept. The focus......, multiple memberships and different levels of participation, and accompanied by a governance frame. The paper discusses central mechanisms for coordinating knowledge in such a complex construction project. The knowledge relations are conceptualised through focusing on redundancy, understood as negotiated...

  18. The Pliocene Model Intercomparison Project (PlioMIP) Phase 2: Scientific objectives and experimental design

    Science.gov (United States)

    Haywood, Alan M.; Dowsett, Harry J.; Dolan, Aisling M.; Rowley, David; Abe-Ouchi, Ayako; Otto-Bliesner, Bette; Chandler, Mark A.; Hunter, Stephen J.; Lunt, Daniel J.; Pound, Matthew; Salzmann, Ulrich

    2016-01-01

    The Pliocene Model Intercomparison Project (PlioMIP) is a co-ordinated international climate modelling initiative to study and understand climate and environments of the Late Pliocene, as well as their potential relevance in the context of future climate change. PlioMIP examines the consistency of model predictions in simulating Pliocene climate and their ability to reproduce climate signals preserved by geological climate archives. Here we provide a description of the aim and objectives of the next phase of the model intercomparison project (PlioMIP Phase 2), and we present the experimental design and boundary conditions that will be utilized for climate model experiments in Phase 2. 

  19. Prioritization of Forest Restoration Projects: Tradeoffs between Wildfire Protection, Ecological Restoration and Economic Objectives

    Directory of Open Access Journals (Sweden)

    Kevin C. Vogler

    2015-12-01

    Full Text Available The implementation of US federal forest restoration programs on national forests is a complex process that requires balancing diverse socioecological goals with project economics. Despite both the large geographic scope and substantial investments in restoration projects, a quantitative decision support framework to locate optimal project areas and examine tradeoffs among alternative restoration strategies is lacking. We developed and demonstrated a new prioritization approach for restoration projects using optimization and the framework of production possibility frontiers. The study area was a 914,657 ha national forest in eastern Oregon, US that was identified as a national priority for restoration with the goal of increasing fire resiliency and sustaining ecosystem services. The results illustrated sharp tradeoffs among the various restoration goals due to weak spatial correlation of forest stressors and provisional ecosystem services. The sharpest tradeoffs were found in simulated projects that addressed either wildfire risk to the urban interface or wildfire hazard, highlighting the challenges associated with meeting both economic and fire protection goals. Understanding the nature of tradeoffs between restoration objectives and communicating them to forest stakeholders will allow forest managers to more effectively design and implement economically feasible restoration projects.

  20. Identification of superficial defects in reconstructed 3D objects using phase-shifting fringe projection

    Science.gov (United States)

    Madrigal, Carlos A.; Restrepo, Alejandro; Branch, John W.

    2016-09-01

    3D reconstruction of small objects is used in applications of surface analysis, forensic analysis and tissue reconstruction in medicine. In this paper, we propose a strategy for the 3D reconstruction of small objects and the identification of some superficial defects. We applied a technique of projection of structured light patterns, specifically sinusoidal fringes and an algorithm of phase unwrapping. A CMOS camera was used to capture images and a DLP digital light projector for synchronous projection of the sinusoidal pattern onto the objects. We implemented a technique based on a 2D flat pattern as calibration process, so the intrinsic and extrinsic parameters of the camera and the DLP were defined. Experimental tests were performed in samples of artificial teeth, coal particles, welding defects and surfaces tested with Vickers indentation. Areas less than 5cm were studied. The objects were reconstructed in 3D with densities of about one million points per sample. In addition, the steps of 3D description, identification of primitive, training and classification were implemented to recognize defects, such as: holes, cracks, roughness textures and bumps. We found that pattern recognition strategies are useful, when quality supervision of surfaces has enough quantities of points to evaluate the defective region, because the identification of defects in small objects is a demanding activity of the visual inspection.

  1. Improving building life-cycle information management through documentation and communication of project objectives

    Energy Technology Data Exchange (ETDEWEB)

    Hitchcock, R.J.

    1995-08-01

    Most currently available computer tools for the building industry proffer little more than productivity improvement in the transmission of graphical drawings and textual specifications, without addressing more fundamental changes in building life-cycle information management. This paper describes preliminary research into the development of a framework for the documentation and communication of the project objectives of a building project. When implemented in an interactive networked environment, this framework is intended to promote multiple participant involvement in the establishment and use of a common set of explicit goals, from the earliest phase of a project throughout its life cycle. A number of potential applications for this framework are identified. The requirements for integrating this life-cycle information with a product model of the physical design of a building, in an attempt to document and communicate design intent, are also discussed.

  2. Objective assessment of surgical technique in rotation and nasal projection variation

    Directory of Open Access Journals (Sweden)

    Marina Serrato Coelho Fagundes

    2016-02-01

    Full Text Available ABSTRACT INTRODUCTION: In rhinoplasty, facial esthetic analysis is critical for proper surgical planning. Parameters such as rotation and nasal projection should be routinely evaluated. Few studies have objectively assessed changes in facial angles postoperatively. OBJECTIVE: To evaluate the effectiveness of medial intercrural sutures and of rotation of the nasal tip on the increase of rotation and nasal projection in Caucasian patients undergoing primary rhinoplasty. METHODS: A prospective study carried out between 2011 and 2013, with 27 patients treated with primary rhinoplasty with a basic technique by the same surgeon, with medial intercrural sutures and rotation of the nasal tip. Rotation and nasal projection were measured from photographs obtained preoperatively and after 12 months. RESULTS: All 27 patients completed the study. The mean age was 27.1 years. There was a mean increase of 8.4° in the rotation - a statistically significant value. There was no significant change in the projection. CONCLUSION: The medial intercrural and nasal tip rotation sutures are effective in increasing nasal rotation in Caucasian patients undergoing rhinoplasty.

  3. Method of formation of individual graphic style among students, studying projection objects of graphic design

    Directory of Open Access Journals (Sweden)

    Lyudmila Sinitsyna

    2015-04-01

    Full Text Available Projection of design objects is the main type of professional activity of designers, the creative almost un-predictable process. The skills of a designer are demanded by the society, when a certain designer at any time and without effort in a short period of time can develop a design object, which can easily be imple-mented in production, which will be in demand by a consumer for a long time and almost without special modifications. Each teacher of design thinks about the ways and methods of teaching the design stages. The author offers a way to get the skills of design based on the simultaneous execution of two tasks with different goals, objectives and method of images.

  4. An online triple-frequency color-encoded fringe projection profilometry for discontinuous object

    Science.gov (United States)

    Wan, Ying-Ying; Cao, Yi-Ping; Chen, Cheng; Peng, Kuang

    2016-08-01

    An online triple-frequency color-encoded fringe projection profilometry is proposed to measure the complex and discontinuous object at straight-line movement. N frames of color fringe patterns are specially designed. Three grayscale sinusoidal grating patterns with geometric progression frequency growth are encoded into red (R), green (G), and blue (B) channels separately to compose a color-encoded fringe pattern. If these three grayscale sinusoidal grating patterns are phase-shifted N steps with an equivalent shift phase of 2π/N, they can compose the corresponding N frames of color-encoded fringe patterns as above respectively. In order to avoid the movement's interference to the phase shifting, position adjustment should be done to guarantee the phase-shifting direction to be perpendicular to the moving direction. While these N frames of specially designed color-encoded fringe patterns are projected onto the moving object one by one, the corresponding deformed color patterns are captured by a CCD camera in real time. By color separating, color crosstalk compensation, pixel matching, and phase calculation, three wrapped phase at different frequencies can be extracted. The unwrapped phase can be solved by a simplified algorithm based on temporal phase unwrapping method from the relationship of the three wrapped phase at the same pixel. Thus, it is very suitable to measure the online complex and discontinuous objects at straight-line movement. The experimental results show the feasibility and the validity of the proposed method.

  5. PROJECTING VISUALISATION OF DIDACTIC OBJECTS AS A DETERMINANT OF STUDENTS’ DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    N. N. Manko

    2013-01-01

    Full Text Available The paper investigates the pedagogic potential of visualization phenomenon. The research is aimed at substantiating the didactic instruments implementation for raising the effectiveness of knowledge acquisition. The research methodology basis incorporates the cognitive visualization ideas along with the theory and technology of instrumental didactics.The projection process, viewed as the mechanism and outcome of the human mind activity, is regarded as a pedagogic means for visualization and modeling of educational content. For organizing and controlling the above process, the author introduces a regulative concept, referred to as the programming basis of a human consciousness directing the cognition processes and reflecting the outcomes of teaching activity.The development trends of pedagogic principle of visibility are demonstrated; the projective regulative visualization of didactic objects being outlined. The author describes the anthropological and socio-cultural background of visibility principle and suggests the complex of didactic visual means for solving the pedagogic tasks. 

  6. Planning and managing future space facility projects. [management by objectives and group dynamics

    Science.gov (United States)

    Sieber, J. E.; Wilhelm, J. A.; Tanner, T. A.; Helmreich, R. L.; Burgenbauch, S. F.

    1979-01-01

    To learn how ground-based personnel of a space project plan and organize their work and how such planning and organizing relate to work outcomes, longitudinal study of the management and execution of the Space Lab Mission Development Test 3 (SMD 3) was performed at NASA Ames Research Center. A view of the problems likely to arise in organizations and some methods of coping with these problems are presented as well as the conclusions and recommendations that pertain strictly to SMD 3 management. Emphasis is placed on the broader context of future space facility projects and additional problems that may be anticipated. A model of management that may be used to facilitate problem solving and communication - management by objectives (MBO) is presented. Some problems of communication and emotion management that MBO does not address directly are considered. Models for promoting mature, constructive and satisfying emotional relationships among group members are discussed.

  7. Full-viewpoint 3D Space Object Recognition Based on Kernel Locality Preserving Projections

    Institute of Scientific and Technical Information of China (English)

    Meng Gang; Jiang Zhiguo; Liu Zhengyi; Zhang Haopeng; Zhao Danpei

    2010-01-01

    Space object recognition plays an important role in spatial exploitation and surveillance,followed by two main problems:lacking of data and drastic changes in viewpoints.In this article,firstly,we build a three-dimensional (3D) satellites dataset named BUAA Satellite Image Dataset (BUAA-SID 1.0) to supply data for 3D space object research.Then,based on the dataset,we propose to recognize full-viewpoint 3D space objects based on kemel locality preserving projections (KLPP).To obtain more accurate and separable description of the objects,firstly,we build feature vectors employing moment invariants,Fourier descriptors,region covariance and histogram of oriented gradients.Then,we map the features into kernel space followed by dimensionality reduction using KLPP to obtain the submanifold of the features.At last,k-nearest neighbor (kNN) is used to accomplish the classification.Experimental results show that the proposed approach is more appropriate for space object recognition mainly considering changes of viewpoints.Encouraging recognition rate could be obtained based on images in BUAA-SID 1.0,and the highest recognition result could achieve 95.87%.

  8. Application of Scientific Approaches for Evaluation of Quality of Learning Objects in eQNet Project

    Science.gov (United States)

    Kurilovas, Eugenijus; Serikoviene, Silvija

    The paper is aimed to analyse the application of several scientific approaches, methods, and principles for evaluation of quality of learning objects for Mathematics subject. The authors analyse the following approaches to minimise subjectivity level in expert evaluation of the quality of learning objects, namely: (1) principles of multiple criteria decision analysis for identification of quality criteria, (2) technological quality criteria classification principle, (3) fuzzy group decision making theory to obtain evaluation measures, (4) normalisation requirement for criteria weights, and (5) scalarisation method for learning objects quality optimisation. Another aim of the paper is to outline the central role of social tagging to describe usage, attention, and other aspects of the context; as well as to help to exploit context data towards making learning object repositories more useful, and thus enhance the reuse. The applied approaches have been used practically for evaluation of learning objects and metadata tagging while implementing European eQNet and te@ch.us projects in Lithuanian comprehensive schools in 2010.

  9. Laboratory Seismic Monitoring and X-ray CT imaging of Supercritical CO2 Injection in Reservoir Sand: WESTCAB King Island Project

    Science.gov (United States)

    Nakashima, S.; Kneafsey, T. J.; Nakagawa, S.; Harper, E. J.

    2013-12-01

    The Central Valley of California contains promising locations for on-shore geologic CO2 storage. DOE's WESTCARB (West Coast Regional Carbon Sequestration Partnership) project drilled and cored a borehole (Citizen Green Well) at King Island (near Stockton, CA) to study the CO2 storage capability of saline and gas-bearing formations in the southwestern Sacramento Basin. Potential reservoirs encountered in the borehole include Domengine, Mokelumne River (primary target), and Top Starkey formations. In anticipation of geophysical monitoring of possible CO2 injection into this particular borehole and of the long-term migration of the CO2, we conducted small-scale CO2 injection experiments on three core samples retrieved from the well (Mokelumne River sand A and B) and from a mine outcrop (Domengine sandstone). During the experiment, a jacketed core sample (diameter 1.5 inches, length 4.0-6.0 inches) saturated with brine- (1% NaCl aq.) was confined within a pressure vessel via compressed nitrogen to 3,500-4,000psi, and supercritical CO2 was injected into the core at 2,000-2,500psi and 45-60 degrees C. The CO2 pressure and temperature were adjusted so that the bulk elastic modulus of the CO2 was close to the expected in-situ modulus--which affects the seismic properties most--while keeping the confining stress within our experimental capabilities. After the CO2 broke through the core, fresh brine was re-injected to remove the CO2 by both displacement and dissolution. Throughout the experiment, seismic velocity and attenuation of the core sample were measured using the Split Hopkinson Resonant Bar method (Nakagawa, 2012, Rev. Sci. Instr.) at near 1 kHz (500Hz--1.5 kHz), and the CO2 distribution determined via x-ray CT imaging. In contrast to relatively isotropic Mokelumne sand A, Domengine sandstone and Mokelumne sand B cores exhibited CO2 distributions strongly controlled by the bedding planes. During the CO2 injection, P-wave velocity and attenuation of the layered

  10. MEASUREMENT PROCESS OF SOFTWARE DEVELOPMENT PROJECTS FOR SUPPORTING STRATEGIC BUSINESS OBJECTIVES IN SOFTWARE DEVELOPING COMPANIES

    Directory of Open Access Journals (Sweden)

    Sandra Lais Pedroso

    2013-08-01

    Full Text Available Software developing companies work in a competitive market and are often challenged to make business decisions with impact on competitiveness. Models accessing maturity for software development processes quality, such as CMMI and MPS-BR, comprise process measurements systems (PMS. However, these models are not necessarily suitable to support business decisions, neither to achieve strategic goals. The objective of this work is to analyze how the PMS of software development projects could support business strategies for software developing companies. Results taken from this work show that PMS results from maturity models for software processes can be suited to help evaluating operating capabilities and supporting strategic business decisions.

  11. Using Design as Boundary Spanner Object in Climate Change Mitigation Projects

    Directory of Open Access Journals (Sweden)

    Walter Fernandez

    2010-01-01

    Full Text Available Climate change is a growing concern for society and the focus of numerous research initiatives across multiple fields of science. These initiatives often need to capitalize on the cross-specialized knowledge contributed by researchers from very different fields. The diversity of worldviews among key stakeholders requires an effective overall design strategy acting as a boundary spanner object. This study presents an account of the issues faced by a multidisciplinary research project and discusses the suitability of a design approach to help address issues such as equality, empowerment, autonomy, creativity, performance, reduction of innovation cycle times and also provide for the necessary balance between control, speediness and flexibility.

  12. Projective Identification, Self-Disclosure, and the Patient's View of the Object: The Need for Flexibility

    Science.gov (United States)

    Waska, Robert T.

    1999-01-01

    Certain patients, through projective identification and splitting mechanisms, test the boundaries of the analytic situation. These patients are usually experiencing overwhelming paranoid-schizoid anxieties and view the object as ruthless and persecutory. Using a Kleinian perspective, the author advocates greater analytic flexibility with these difficult patients who seem unable to use the standard analytic environment. The concept of self-disclosure is examined, and the author discusses certain technical situations where self-disclosure may be helpful.(The Journal of Psychotherapy Practice and Research 1999; 8:225–233) PMID:10413442

  13. Multicontroller: an object programming approach to introduce advanced control algorithms for the GCS large scale project

    CERN Document Server

    Cabaret, S; Coppier, H; Rachid, A; Barillère, R; CERN. Geneva. IT Department

    2007-01-01

    The GCS (Gas Control System) project team at CERN uses a Model Driven Approach with a Framework - UNICOS (UNified Industrial COntrol System) - based on PLC (Programming Language Controller) and SCADA (Supervisory Control And Data Acquisition) technologies. The first' UNICOS versions were able to provide a PID (Proportional Integrative Derivative) controller whereas the Gas Systems required more advanced control strategies. The MultiController is a new UNICOS object which provides the following advanced control algorithms: Smith Predictor, PFC (Predictive Function Control), RST* and GPC (Global Predictive Control). Its design is based on a monolithic entity with a global structure definition which is able to capture the desired set of parameters of any specific control algorithm supported by the object. The SCADA system -- PVSS - supervises the MultiController operation. The PVSS interface provides users with supervision faceplate, in particular it links any MultiController with recipes: the GCS experts are ab...

  14. Sands styrke

    DEFF Research Database (Denmark)

    Jacobsen, H. Moust; Jørgensen, Mogens B.; Poulsen, H. Serup

    1975-01-01

    På grundlag af triaxialforsøg med D=7 og 20 cm og varierende højde på løse og faste lejringer af Blokhussand kan effekten af varierende højde-breddeforhold og spændingsniveau samt skalaeffekten bestemmes. Ved sammenligning med pladeforsøg med overfladelast op til 8 t/m2 kan den almindelige fremga...... fremgangsmåde ved bæreevneberegninger på sand undersøges....

  15. Fresh groundwater resources in a large sand replenishment

    NARCIS (Netherlands)

    Huizer, Sebastian; Oude Essink, G.H.P.; Bierkens, Marc

    2016-01-01

    The anticipation of sea-level rise and increases in extreme weather conditions has led to the initiation of an innovative coastal management project called the Sand Engine. In this pilot project a large volume of sand (21.5 million m3) – also called sand replenishment or nourishment – was placed on

  16. Shape and spin distributions of large object populations from random projection areas

    CERN Document Server

    Nortunen, Hari

    2016-01-01

    We model the shape and spin characteristics of an object population when there are not enough data to model its single members. The data are random projection areas of the members. We construct a mapping $f(x)\\rightarrow C(y)$, $x\\in\\mathbb{R}^2$, $y\\in\\mathbb{R}$, where $f(x)$ is the distribution function of the shape elongation and spin vector obliquity, and $C(y)$ is the cumulative distribution function of an observable $y$ describing the variation of the observed projection areas of one member, and show that the mapping is invertible. Using the projected area of an ellipsoid as our model, we obtain analytical basis functions for a function series of $C(y)$ and prove uniqueness and stability properties of the inverse problem. Even though the model error is considerably larger than the measurement noise for realistic cases of arbitrary shapes (such as asteroids), the main characteristics of $f(x)$ (such as the locations of peaks) are robustly recovered from the data.

  17. The Fiber Multi-object Spectrograph (FMOS) Project: the Anglo-Australian Observatory role

    Science.gov (United States)

    Gillingham, Peter R.; Moore, Anna M.; Akiyama, Masayuki; Brzeski, Jurek; Correll, David; Dawson, John; Farrell, Tony J.; Frost, Gabriella; Griesbach, Jason S.; Haynes, Roger; Jones, Damien; Miziarski, Stan; Muller, Rolf; Smedley, Scott; Smith, Greg; Waller, Lew G.; Noakes, Katie; Arridge, Chris

    2003-03-01

    The Fiber Multi-Object Spectrograph (FMOS) project is an Australia-Japan-UK collaboration to design and build a novel 400 fiber positioner feeding two near infrared spectrographs from the prime focus of the Subaru telescope. The project comprises several parts. Those under design and construction at the Anglo-Australian Observatory (AAO) are the piezoelectric actuator driven fiber positioner (Echidna), a wide field (30 arcmin) corrector and a focal plane imager (FPI) used for controlling the positioner and for field acquisition. This paper presents an overview of the AAO share of the FMOS project. It describes the technical infrastructure required to extend the single Echidna "spine" design to a fully functioning multi-fiber instrument, capable of complete field reconfiguration in less than ten minutes. The modular Echidna system is introduced, wherein the field of view is populated by 12 identical rectangular modules, each positioning 40 science fibers and 2 guide fiber bundles. This arrangement allows maintenance by exchanging modules and minimizes the difficulties of construction. The associated electronics hardware, in itself a significant challenge, includes a 23 layer PCB board, able to supply current to each piezoelectric element in the module. The FPI is a dual purpose imaging system translating in two coordinates and is located beneath the assembled modules. The FPI measures the spine positions as well as acquiring sky images for instrument calibration and for field acquisition. An overview of the software is included.

  18. Fakability of different measurement methods for achievement motivation: questionnaire, semi-projective, and objective

    Directory of Open Access Journals (Sweden)

    MATTHIAS ZIEGLER

    2007-12-01

    Full Text Available Different means can be applied to assess noncognitive personality aspects: projective, semi-projective, self-report, and objective. However, so far little attention has been paid towards the different fakability of these methods. The present study investigated this question with different achievement motivation instruments. The instruments were randomly administered to three student groups: fake bad (n = 41, fake good (n = 37, and control group (n = 41. The faking groups were given specific faking instructions while the control group only received the standard instructions. All instruments were applied computer-assisted. The results show that all tests are fakeable with the exception of the objective measure which could not be faked good as was expected. The effect sizes (d ranged from .10 to 2.36. Cut-off scores for the detection of faking were computed based on sensitivity as well as specificity. Moreover, they were tested within a second student sample (n = 123. Sensitivity and specificity values are reported. The practical implications for test authors and practitioners are discussed.

  19. Aspects of transport transit hubs construction management in coordination with object lifecycle projecting

    Directory of Open Access Journals (Sweden)

    Danilina Nina

    2016-01-01

    Full Text Available The article involves the results of the research in the field of the initial phase in the project of the object lifecycle for urban public transportation transit hubs (TTH. The main purpose is to provide definition and justification of area parameters for spatial solution of a hub with consideration of its construction viability and sustainability of urban development. In the article there are presented the results of analytical studies of the data available in the approved Planning documentation for TTH objects listed in the short-term program of TTH construction in Moscow. The point of interest was to obtain correlations between the total area of TTH area, areas of commercial and technological use and passenger traffic value in order to define territory balance providing request from city authorities and private investors for construction project management. Also, there is presented the theoretical model as an evaluation guide that allows evaluating not only the demand of a city and its population in the development of TTH territory but also and especially the requirements for placing commercial areas inside TTH.

  20. Objective climate classification as a framework for assessing projected climate change in High Mountain Asia

    Science.gov (United States)

    Forsythe, Nathan; Fowler, Hayley; Pritchard, David; Blenkinsop, Stephen

    2016-04-01

    This study builds upon foundational work by Forsythe et al (2015, doi: 10.5194/esd-6-311-2015) which used principal component analysis (PCA) and k-means clustering to derive objective present climate classifications over High Mountain Asia and adjacent regions (60E to 100E, 20N to 40N) based on global meteorological reanalyses' estimates of the drivers of water resources availability and variability (precipitation, surface shortwave radiation, daily mean near surface air temperature and its diurnal range). This study refines Forsythe et al (2015) by testing the potential for spatially disaggregating coarse global reanalyses (and climate model outputs) using iterative classification and regression processing to achieve a 5km (0.05 decimal degree) horizontal resolution in order better capture the severe topographic range and gradients of the HMA domain. This spatial refinement should allow for better intercomparability of resultant classifications derived from datasets with different native resolutions. This intercomparability is critical because the second stage of this assesses climate change projections from a range regional climate model experiments - UK Hadley Centre RQUMP 25km South Asia perturbed physics ensemble, CORDEX South Asia domain and (pending dataset availability) NextData EC-Earth 15km high resolution HMA domain - using derived objective classifications as a framework for aggregation. By establishing sub-regional units of relative homogeneity, the objective classification approach allows twofold assessment of project future climate scenarios, i.e. change can be quantified not only as perturbation of key variables (e.g. precipitation, temperature, etc) but also in terms of the spatial descriptors (areal extent, surface elevation range and mean, latitudinal and longitudinal bounds) of the identified climate zones. It is expected that this novel approach, and in particular the very high target spatial resolution, will yield important insights into the

  1. Detection of buried objects using ultra-wideband radar: newly launched mine detection project in South Korea

    Science.gov (United States)

    Kam, Kyungryul; Kim, Kangwook

    2008-04-01

    Korea is one of the heavily mined countries in the world. The demand for mine detection and clearance techniques has always been high in South Korea. In support of this, a new project on ground penetrating radar (GPR) for landmine detection has been launched in South Korea. The GPR under development is an ultra wideband sensor system that requires high-resolution imaging of buried targets and database construction based on target signals in various ground conditions. For initial experiments, a simple GPR has been built using a resistive vee dipole antenna and a vector network analyzer. The GPR is scanned over a sand tank with an area of 2.5m × 2.5m and a depth of 1.5m, which is used for target burial. During the first stage of the project, the data obtained by scanning the GPR antenna over a target are processed to evaluate various radar signal waveforms, performance of various antennas, and other system configurations. Based on the evaluation, an advanced GPR system will be built and used to construct the database during the second stage of the project. A description for motivation for the GPR project, overview of the GPR project, experiment setup, and initial experiment results are presented in this paper.

  2. Tar sand

    Energy Technology Data Exchange (ETDEWEB)

    McLendon, T.R.; Bartke, T.C.

    1990-01-01

    Research on tar sand is briefly discussed. The research program supported by the US Department of Energy (DOE) includes a variety of surface extraction schemes. The University of Utah has process development units (PDU) employing fluidized bed, hot, water-assisted, and fluidized-bed/heat-pipe, coupled combustor technology. Considerable process variable test data have been gathered on these systems: (1) a rotary kiln unit has been built recently; (2) solvent extraction processing is being examined; and (3) an advanced hydrogenation upgrading scheme (hydropyrolysis) has been developed. The University of Arkansas, in collaboration with Diversified Petroleum, Inc., has been working on a fatty acid, solvent extraction process. Oleic acid is the solvent/surfactant. Solvent is recovered by adjusting processing fluid concentrations to separate without expensive operations. Western Research Institute has a PDU-scale scheme called the Recycle Oil Pyrolysis and Extraction (ROPE) process, which combines solvent (hot recycle bitumen) and pyrolytic extraction. 14 refs., 19 figs.

  3. SDSS-RM: A Multi-Object AGN Reverberation Mapping Project

    Science.gov (United States)

    Shen, Y.; SDSS-RM Collaboration

    2016-10-01

    The Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project is a dedicated multi-object RM program that simultaneously monitors ˜ 850 quasars at 0.1measure RM lags for a homogeneous AGN sample. The combination of multi-year, high-cadence photometric light curves since 2010 (hundreds of epochs) and dedicated SDSS spectroscopy (32 epochs completed in 2014 with more epochs in 2015 and beyond) will enable important studies on the structure of the broad-line region (BLR), RM lags and BH mass measurements, as well as ancillary science such as quasar variability, host galaxy properties, and quasar absorption lines. I will summarize the current status of the program and present some early science results based on the year-1 SDSS-RM data.

  4. Geostatistical modeling of facies, bitumen grade and particle size distribution for the Joslyn oil sand open pit mine project

    Energy Technology Data Exchange (ETDEWEB)

    Babak, Olena; Insalaco, Enzo; Mittler, Andreas [Total EandP Canada Ltd. (Canada)

    2011-07-01

    The Joslyn North Mine Project is currently in the pre-development stage; the aim of this study is to use different available data to draw a geological model of facies, bitumen grade, full particle size distribution (PSD) and ore/waste discrimination. The study was conducted with the database of around 800 wells, stochastic, indicator and Gaussian simulations were performed along with a sensitivity study. Results demonstrated the importance of some parameters for evaluating grade cases including variogram uncertainty, sampling limitations and errors in geostatistical workflow. In addition, modeling the full PSD dataset was shown to be useful. This study demonstrated how to use available database through an overall workflow to develop case scenarios for bitumen in place in ore and characterize the ore material.

  5. An Objective Approach to Select Climate Scenarios when Projecting Species Distribution under Climate Change.

    Science.gov (United States)

    Casajus, Nicolas; Périé, Catherine; Logan, Travis; Lambert, Marie-Claude; de Blois, Sylvie; Berteaux, Dominique

    2016-01-01

    An impressive number of new climate change scenarios have recently become available to assess the ecological impacts of climate change. Among these impacts, shifts in species range analyzed with species distribution models are the most widely studied. Whereas it is widely recognized that the uncertainty in future climatic conditions must be taken into account in impact studies, many assessments of species range shifts still rely on just a few climate change scenarios, often selected arbitrarily. We describe a method to select objectively a subset of climate change scenarios among a large ensemble of available ones. Our k-means clustering approach reduces the number of climate change scenarios needed to project species distributions, while retaining the coverage of uncertainty in future climate conditions. We first show, for three biologically-relevant climatic variables, that a reduced number of six climate change scenarios generates average climatic conditions very close to those obtained from a set of 27 scenarios available before reduction. A case study on potential gains and losses of habitat by three northeastern American tree species shows that potential future species distributions projected from the selected six climate change scenarios are very similar to those obtained from the full set of 27, although with some spatial discrepancies at the edges of species distributions. In contrast, projections based on just a few climate models vary strongly according to the initial choice of climate models. We give clear guidance on how to reduce the number of climate change scenarios while retaining the central tendencies and coverage of uncertainty in future climatic conditions. This should be particularly useful during future climate change impact studies as more than twice as many climate models were reported in the fifth assessment report of IPCC compared to the previous one.

  6. It's in the sand

    OpenAIRE

    Mitchell, Clive

    2016-01-01

    Sand is sand isn’t it? Sand gets everywhere but rather than a nuisance it is a valuable, high-purity raw material. Clive Mitchell, Industrial Minerals Specialist at the British Geological Survey (BGS), talks us through what sand is, what it can be used for and how to find it. His exploration of sand takes us from the deserts of Arabia to the damp sand pits of Mansfield!

  7. Contribution to improving of the sands-bitumen

    Science.gov (United States)

    Haddadi, S.; Saoula, S.; Muñoz, M. E.; Santamaría, A.

    2012-09-01

    Algeria is a country made up of about 75% desert. It is a country rich in sand dune. Roads made in these regions have had very significant damage. Their repairs are very expensive because there are generally isolated roads and supporting low traffic. Aggregates represent about 94% of the asphalt mixture. Aggregate quarries which have good characteristics for bituminous concrete are found in northern Algeria. The transport of these aggregates from north to south is extremely expensive. This makes the project to the south of Algeria very expensive. In order to overcome the lack of aggregates, the use of local materials becomes a necessity. In this study we were interested in the sand dunes in two regions of southern Algeria: El-Oued and Ouargla. The objective of this work is to find ways to improve the mechanical properties of these sands to increase the life of pavements with low traffic in these areas. We have associated with these sands: crushed sand of the north, cement, lime and sulfur. Hubbard Field test, Marshall test, and Duriez test were applied to the different bituminous mixtures. This study showed that some associations have given encouraging results.

  8. Using Barriers to Reduce the Sensitivity to Edge Miscalculations of Casting-Based Object Projection Feature Estimation

    CERN Document Server

    Quesada, Luis

    2012-01-01

    3D motion tracking is a critical task in many computer vision applications. Unsupervised markerless 3D motion tracking systems determine the most relevant object in the screen and then track it by continuously estimating its projection features (center and area) from the edge image and a point inside the relevant object projection (namely, inner point), until the tracking fails. Existing reliable object projection feature estimation techniques are based on ray-casting or grid-filling from the inner point. These techniques assume the edge image to be accurate. However, in real case scenarios, edge miscalculations may arise from low contrast between the target object and its surroundings or motion blur caused by low frame rates or fast moving target objects. In this paper, we propose a barrier extension to casting-based techniques that mitigates the effect of edge miscalculations.

  9. The sand extraction potential of embedded land surface lowering in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Kleine, M.P.E. de; Veldkamp, J.G.; Dubelaar, C.W.; Pietersen, H.S.

    2004-01-01

    In the Netherlands, mineral extraction by means of dredging or quarrying meets with considerable societal resistance. Land surface lowering prior to large land reconstruction projects may raise fewer objections. We have calculated the potential yields of sand and gravel from land surface lowering

  10. The sand extraction potential of embedded land surface lowering in the Netherlands

    NARCIS (Netherlands)

    Van der Meulen, M.J.; De Kleine, M.P.E.; Veldkamp, J.G.; Dubbelaar, C.W.; Pietersen, H.S.

    2004-01-01

    In the Netherlands, mineral extraction by means of dredging or quarrying meets with considerable societal resistance. Land surface lowering prior to large land reconstruction projects may raise fewer objections. We have calculated the potential yields of sand and gravel form land surface lowering

  11. Influence of the measurement object's reflective properties on the accuracy of array projection-based 3D sensors

    Science.gov (United States)

    Heist, Stefan; Kühmstedt, Peter; Notni, Gunther

    2017-05-01

    In order to increase the measurement speed of pattern projection-based three-dimensional (3-D) sensors, in 2014, we introduced the so-called array projector which allows pattern projection at several 1,000 fps. As the patterns are switched by switching on and off the light sources of multiple slide projectors, each pattern originates from a different projection center. This may lead to a 3-D point deviation when measuring glossy objects. In this contribution, we theoretically and experimentally investigate the dependence of this deviation on the measurement object's reflective properties. Furthermore, we propose a procedure for compensating for this deviation.

  12. The Pliocene Model Intercomparison Project (PlioMIP) Phase 2: scientific objectives and experimental design

    Science.gov (United States)

    Haywood, Alan M.; Dowsett, Harry J.; Dolan, Aisling M.; Rowley, David; Abe-Ouchi, Ayako; Otto-Bliesner, Bette; Chandler, Mark A.; Hunter, Stephen J.; Lunt, Daniel J.; Pound, Matthew; Salzmann, Ulrich

    2016-03-01

    The Pliocene Model Intercomparison Project (PlioMIP) is a co-ordinated international climate modelling initiative to study and understand climate and environments of the Late Pliocene, as well as their potential relevance in the context of future climate change. PlioMIP examines the consistency of model predictions in simulating Pliocene climate and their ability to reproduce climate signals preserved by geological climate archives. Here we provide a description of the aim and objectives of the next phase of the model intercomparison project (PlioMIP Phase 2), and we present the experimental design and boundary conditions that will be utilized for climate model experiments in Phase 2. Following on from PlioMIP Phase 1, Phase 2 will continue to be a mechanism for sampling structural uncertainty within climate models. However, Phase 1 demonstrated the requirement to better understand boundary condition uncertainties as well as uncertainty in the methodologies used for data-model comparison. Therefore, our strategy for Phase 2 is to utilize state-of-the-art boundary conditions that have emerged over the last 5 years. These include a new palaeogeographic reconstruction, detailing ocean bathymetry and land-ice surface topography. The ice surface topography is built upon the lessons learned from offline ice sheet modelling studies. Land surface cover has been enhanced by recent additions of Pliocene soils and lakes. Atmospheric reconstructions of palaeo-CO2 are emerging on orbital timescales, and these are also incorporated into PlioMIP Phase 2. New records of surface and sea surface temperature change are being produced that will be more temporally consistent with the boundary conditions and forcings used within models. Finally we have designed a suite of prioritized experiments that tackle issues surrounding the basic understanding of the Pliocene and its relevance in the context of future climate change in a discrete way.

  13. The Pliocene Model Intercomparison Project (PlioMIP) Phase 2: Scientific Objectives and Experimental Design

    Science.gov (United States)

    Haywood, Alan M.; Dowsett, Harry J.; Dolan, Aisling M.; Rowley, David; Abe-Ouchi, Ayako; Otto-Bliesner, Bette; Chandler, Mark A.; Hunter, Stephen J.; Lunt, Daniel J.; Pound, Matthew; Salzmann, Ulrich

    2016-01-01

    The Pliocene Model Intercomparison Project (PlioMIP) is a co-ordinated international climate modelling initiative to study and understand climate and environments of the Late Pliocene, as well as their potential relevance in the context of future climate change. PlioMIP examines the consistency of model predictions in simulating Pliocene climate and their ability to reproduce climate signals preserved by geological climate archives. Here we provide a description of the aim and objectives of the next phase of the model intercomparison project (PlioMIP Phase 2), and we present the experimental design and boundary conditions that will be utilized for climate model experiments in Phase 2. Following on from PlioMIP Phase 1, Phase 2 will continue to be a mechanism for sampling structural uncertainty within climate models. However, Phase 1 demonstrated the requirement to better understand boundary condition uncertainties as well as uncertainty in the methodologies used for data-model comparison. Therefore, our strategy for Phase 2 is to utilize state-of-the-art boundary conditions that have emerged over the last 5 years. These include a new palaeogeographic reconstruction, detailing ocean bathymetry and land-ice surface topography. The ice surface topography is built upon the lessons learned from offline ice sheet modelling studies. Land surface cover has been enhanced by recent additions of Pliocene soils and lakes. Atmospheric reconstructions of palaeo-CO2 are emerging on orbital timescales, and these are also incorporated into PlioMIP Phase 2. New records of surface and sea surface temperature change are being produced that will be more temporally consistent with the boundary conditions and forcings used within models. Finally we have designed a suite of prioritized experiments that tackle issues surrounding the basic understanding of the Pliocene and its relevance in the context of future climate change in a discrete way.

  14. Application of design projects developed by Foundry Research Institute in Krakow in construction of integrated stand for processing and reclamation of moulding sands

    Directory of Open Access Journals (Sweden)

    I. Izdebska-Szanda

    2008-04-01

    Full Text Available The article is devoted to the description of a new integrated system for processing and reclamation of moulding and core sands using the equipment developed by Foundry Research Institute in Krakow. The idea and operation of a complex stand, which allows for co-existence of three routes of material circulation, i.e. system sand, new sand and reclaim, with maximum utilisation of the existing equipment have been presented. Various aspects, economical and ecological, of the proposed design have been discussed.

  15. Industrial sand and gravel

    Science.gov (United States)

    Dolley, T.P.

    2013-01-01

    Domestic production of industrial sand and gravel in 2012 was about 49.5 Mt (55 million st), increasing 13 percent compared with that of 2011. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  16. Eastern Scheldt Sand, Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Andersen, A. T; Madsen, E. B.; Schaarup-Jensen, A. L.

    The present data report contains data from 13 drained triaxial tests, performed on two different sand types in the Soil Mechanics Laboratory at Aalborg University in March, 1997. Two tests have been performed on Baskarp Sand No. 15, which has already ken extensively tested in the Soil Mechanics...... Laboratory. The remaining 11 triaxial tests have ben performed on Eastern Scheldt Sand, which is a material not yet investigated at the Soil Mechanics Laboratory. In the first pari of this data report, the characteristics of the two sand types in question will be presented. Next, a description...

  17. A multi-objective genetic algorithm model for time-cost trade-off analysis of construction projects

    OpenAIRE

    Senouci, Ahmed; Al-Derham, Hassan R.

    2006-01-01

    Time-cost trade-off analysis is one of the most important aspects of construction project planning and control. There are trade-offs between time and cost to complete the activities of a project. Existing methods for time-cost trade-off analysis are not efficient enough to solve large-scale CPM networks (hundreds of activities or more). This paper presents an advanced and robust multi-objective genetic algorithm model for the time-cost trade-off analysis of construction projects. The model al...

  18. How Can Procurement Contribute to Network Performance? Streamlining Network, Project and Procurement Objectives

    NARCIS (Netherlands)

    Leendertse, W.; Arts, J.; De Ridder, H.

    2012-01-01

    The core business of governmental organizations like Rijkswaterstaat in the Netherlands is the optimal management of road-end waterway networks. The coming years many maintenance, renewal and extension projects will be executed in these networks. Projects give a disturbance in functionality of the

  19. How Can Procurement Contribute to Network Performance? Streamlining Network, Project and Procurement Objectives

    NARCIS (Netherlands)

    Leendertse, W.; Arts, J.; De Ridder, H.

    2012-01-01

    The core business of governmental organizations like Rijkswaterstaat in the Netherlands is the optimal management of road-end waterway networks. The coming years many maintenance, renewal and extension projects will be executed in these networks. Projects give a disturbance in functionality of the n

  20. Re-engineering towards object-oriented environments: the TROOP project

    OpenAIRE

    Signore, Oreste; Loffredo, Mario

    1993-01-01

    Software re-engineering and object orientation are two areas of growing interest in the last years. However, while many researchers have focused their interest in the object-oriented design methodologies, a little attention has been paid to the re-engineering towards an object-oriented environment. In this paper we examine the motivations towards object-oriented re-engineering (extendibility, robustness and reusability of the code) and the related problems, due to the difficulty of moving fro...

  1. Global sand trade is paving the way for a tragedy of the sand commons

    Science.gov (United States)

    Torres, A.; Brandt, J.; Lear, K.; Liu, J.

    2016-12-01

    In the first 40 years of the 21st century, planet Earth is highly likely to experience more urban land expansion than in all of history, an increase in transportation infrastructure by more than a third, and a great variety of land reclamation projects. While scientists are beginning to quantify the deep imprint of human infrastructure on biodiversity at large scales, its off-site impacts and linkages to sand mining and trade have been largely ignored. Sand is the most widely used building material in the world. With an ever-increasing demand for this resource, sand is being extracted at rates that far exceed its replenishment, and is becoming increasingly scarce. This has already led to conflicts around the world and will likely lead to a "tragedy of the sand commons" if sustainable sand mining and trade cannot be achieved. We investigate the environmental and socioeconomic interactions over large distances (telecouplings) of infrastructure development and sand mining and trade across diverse systems through transdisciplinary research and the recently proposed telecoupling framework. Our research is generating a thorough understanding of the telecouplings driven by an increasing demand for sand. In particular, we address three main research questions: 1) Where are the conflicts related to sand mining occurring?; 2) What are the major "sending" and "receiving" systems of sand?; and 3) What are the main components (e.g. causes, effects, agents, etc.) of telecoupled systems involving sand mining and trade? Our results highlight the role of global sand trade as a driver of environmental degradation that threatens the integrity of natural systems and their capacity to deliver key ecosystem services. In addition, infrastructure development and sand mining and trade have important implications for other sustainability challenges such as over-fishing and global warming. This knowledge will help to identify opportunities and tools to better promote a more sustainable use

  2. Search for small trans-Neptunian objects by the TAOS project

    Science.gov (United States)

    Chen, W. P.; Alcock, C.; Axelrod, T.; Bianco, F. B.; Byun, Y. I.; Chang, Y. H.; Cook, K. H.; Dave, R.; Giammarco, J.; Kim, D. W.; King, S. K.; Lee, T.; Lehner, M.; Lin, C. C.; Lin, H. C.; Lissauer, J. J.; Marshall, S.; Meinshausen, N.; Mondal, S.; de Pater, I.; Porrata, R.; Rice, J.; Schwamb, M. E.; Wang, A.; Wang, S. Y.; Wen, C. Y.; Zhang, Z. W.

    2007-05-01

    The Taiwan-America Occultation Survey (TAOS) aims to conduct a census of small icy bodies in the outer reach of the Solar System, by means of stellar occultation. An array of 4 small (aperture 0.5 m), wide-field (f/1.9) telescopes have been installed at Lulin Observatory in Taiwan to monitor some one thousand stars simultaneously for such rare occultation events. The occurrence rate of the events would provide constraints on the number and space distribution of the Kuiper-belt Objects (KBOs). As the building blocks of planets and moons, KBOs preserve the formation and early dynamical evolution history of the Solar System. The TAOS project is a collaboration of institutions in Taiwan (Academia Sinica and NCU), the USA (U. Pennsylvannia, Harvard-Smithsonian CfA, Lawrence Livermore National Lab, NASA/Ames, UC-Berkeley), and Korea (Yonsei U.) Because a typical occultation event by a KBO is expected to last for only a fraction of a second, fast photometry is necessary. A true occultation event is considered securely detected if the flux drop is seen in all telescopes. Photometry of a thousand stars, for which the data should be processed, analyzed, and correlated among all telescopes in real time, is a daunting task. Routine observations began in early 2005 and so far a few billion photometric measurements have been collected. Even though no KBO occultation event has been detected, a few certain models on the population of the KBOs can be ruled out already. We will present our special data acquisition and analysis schemes and our statistical results. A few test cases will be shown for which the TAOS system was used to detect stellar occultation events by known asteroids. In addition to the KBO science, the huge TAOS database, ~ some 100 GB per night, would be valuable in other, e.g., stellar variability, studies. Our robotic telescope systems are also responding to gamma-ray bursts. We will present a few examples of variable stars observed by

  3. Sustainable Urban Waters: Opportunities to Integrate Environmental Protection in Multi-objective Projects

    Science.gov (United States)

    Abstract: Nonpoint source pollution is an ongoing challenge for environmental agencies who seek to protect waters of the U.S. Urban stream and waterfront redevelopment projects present opportunities to achieve integrated environmental, economic, and social benefits in urban water...

  4. Choosing an optimum sand control method

    Directory of Open Access Journals (Sweden)

    Ehsan Khamehchi

    2015-06-01

    Full Text Available Formation sand control is always one of the main concerns of production engineers. There are some different methods to prevent sand production. Choosing a method for preventing formation sand production depends on different reservoir parameters and politic and economic conditions. Sometimes, economic and politic conditions are more effective to choose an optimum than reservoir parameters. Often, simultaneous investigation of politic and economic conditions with reservoir parameters has different results with what is expected. So, choosing the best sand control method is the result of thorough study. Global oil price, duration of sand control project and costs of necessary equipment for each method as economic and politic conditions and well productivity index as reservoir parameter are the main parameters studied in this paper.

  5. Influence green sand system by core sand additions

    OpenAIRE

    N. Špirutová; J. Beňo; V. Bednářová; J. Kříž; M. Kandrnál

    2012-01-01

    Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron) are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this co...

  6. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Borup, Marianne; Hedegaard, Jette

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...... and biotit. Mainly the sand will be used for tests concerning the development og the theory of building up pore pressure in sand, L. B. Ibsen 1993....

  7. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...

  8. CONSIDERATIONS REGARDING THE APPLICATION OF THEORY IN PROBLEM SOLVING SPATIAL PROJECTION OF INTERSECTIONS OF SIMPLE OBJECTS

    Directory of Open Access Journals (Sweden)

    COTRUMBĂ Mirela

    2015-06-01

    Full Text Available This paper presents how descriptive geometry contributes to the achievement of intersections of simple objects and isometric axonometric representation of these intersections. It also highlights the role of descriptive geometry on acquiring skills in Technical Drawing, in representation of objects intersection. All illustrations in this paper are made using Microsoft Office Word Drawing Toolbar and AutoCAD software.

  9. Project Wingspread. Metropolitan Community Resources as the Interface for Open Communications. Objectives.

    Science.gov (United States)

    Talmage, Harriet; Mendelson, Lloyd J.

    This publication, part of supplementary materials for a National Council for the Social Studies Conference paper described in SO 003 075, characterizes and offers evaluations on the Wingspread Project. A number of school exchange programs for varying age groups of suburban and urban young people from diverse backgrounds emphasizes a sense of…

  10. Achieving Smart Energy Planning Objectives. The Approach of the Transform Project

    Directory of Open Access Journals (Sweden)

    Ilaria Delponte

    2014-05-01

    Full Text Available Cities play a dual role in the field of energy and integrated planning. They function as institutional planning and decision making bodies and interfere as actors, e.g. as project developers or launching customers. In the first case their attempts at integrated plans are often unsuccessful in integrating vision, goals and instruments of all stakeholders so that waste, water, energy cycles, urban planning and budgets proceed with no connection to each other.  TRANSFORM Project “Transformation Agenda for Low Carbon Cities” (FP7 tries to improve the integrated energy policy and decision making process of cities, both at a strategic and operational level, by providing the cities with a framework based on overall planning experiences and on-the-field projects and qualitative and quantitative analysis support models. The project intends also to make a step further in the quality of research, by providing a replicable and tested framework for the production of a strategic Transformation Agenda for the city as a whole, combined with district Implementation Plans.

  11. Projected Near-Earth Object Discovery Performance of the Large Synoptic Survey Telescope

    Science.gov (United States)

    Chesley, Steven R.; Veres, Peter

    2017-01-01

    This report describes the methodology and results of an assessment study of the performance of the Large Synoptic Survey Telescope (LSST) in its planned efforts to detect and catalog near-Earth objects (NEOs).

  12. Hydraulic fracture model and diagnostics verification at GRI/DOE multi-site projects and tight gas sand program support. Final report, July 28, 1993--February 28, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, J.E.

    1997-12-31

    The Mesaverde Group of the Piceance Basin in western Colorado has been a pilot study area for government-sponsored tight gas sand research for over twenty years. Early production experiments included nuclear stimulations and massive hydraulic fracture treatments. This work culminated in the US Department of Energy (DOE)`s Multiwell Experiment (MWX), a field laboratory designed to study the reservoir and production characteristics of low permeability sands. A key feature of MWX was an infrastructure which included several closely spaced wells that allowed detailed characterization of the reservoir through log and core analysis, and well testing. Interference and tracer tests, as well as the use of fracture diagnostics gave further information on stimulation and production characteristics. Thus, the Multiwell Experiment provided a unique opportunity for identifying the factors affecting production from tight gas sand reservoirs. The purpose of this operation was to support the gathering of field data that may be used to resolve the number of unknowns associated with measuring and modeling the dimensions of hydraulic fractures. Using the close-well infrastructure at the Multiwell Site near Rifle, Colorado, this operation focused primarily on the field design and execution of experiments. The data derived from the experiments were gathered and analyzed by DOE team contractors.

  13. The European Union funded NEOShield project: A global approach to near-Earth object impact threat mitigation

    Science.gov (United States)

    Harris, A. W.; Barucci, M. A.; Cano, J. L.; Fitzsimmons, A.; Fulchignoni, M.; Green, S. F.; Hestroffer, D.; Lappas, V.; Lork, W.; Michel, P.; Morrison, D.; Payson, D.; Schäfer, F.

    2013-09-01

    Although discussions are underway within the Action Team 14 of the United Nations COPUOS, there is currently no concerted international plan addressing the impact threat from near-Earth objects (NEOs) and how to organize, prepare and implement mitigation measures. We report on a new international project to address impact hazard mitigation issues, being the subject of a proposal submitted to the European Commission in response to the 2011 FP7 Call "Prevention of impacts from near-Earth objects on our planet". Our consortium consists of 13 research institutes, universities, and industrial partners from 6 countries and includes leading US and Russian space organizations. The primary aim of the project, NEOShield, is to investigate in detail the three most promising mitigation techniques: the kinetic impactor, blast deflection, and the gravity tractor, and devise feasible demonstration missions. Furthermore, we will investigate options for an international strategy for implementation when an actual impact threat arises. The NEOShield project was formally accepted by the European Commission on 17 November 2011 and funded with a total of 5.8 million Euros for a period of 3.5 years. The kick-off meeting took place at the DLR Institute of Planetary Research, Berlin, in January 2012. In this paper we present a brief overview of the planned scope of the project.

  14. Development of Hybrid Courses Utilizing Modules as an Objective in ATE Projects

    Science.gov (United States)

    Payne, James E.; Murphy, Richard M.; Payne, Linda L.

    2017-01-01

    Orangeburg-Calhoun Technical College (OCtech) has been awarded two National Science Foundation Advanced Technological Education (NSF-ATE) grants since 2011 that have the development of module-based hybrid courses in Engineering Technology and Mechatronics as objectives. In this article, the advantages and challenges associated with module-based…

  15. 3D integrated modeling approach to geo-engineering objects of hydraulic and hydroelectric projects

    Institute of Scientific and Technical Information of China (English)

    ZHONG DengHua; LI MingChao; LIU Jie

    2007-01-01

    Aiming at 3D modeling and analyzing problems of hydraulic and hydroelectric engineering geology, a complete scheme of solution is presented. The first basis was NURBS-TIN-BRep hybrid data structure. Then, according to the classified thought of the object-oriented technique, the different 3D models of geological and engineering objects were realized based on the data structure, including terrain class,strata class, fault class, and limit class; and the modeling mechanism was alternative. Finally, the 3D integrated model was established by Boolean operations between 3D geological objects and engineering objects. On the basis of the 3D model,a series of applied analysis techniques of hydraulic and hydroelectric engineering geology were illustrated. They include the visual modeling of rock-mass quality classification, the arbitrary slicing analysis of the 3D model, the geological analysis of the dam, and underground engineering. They provide powerful theoretical principles and technical measures for analyzing the geological problems encountered in hydraulic and hydroelectric engineering under complex geological conditions.

  16. 3D integrated modeling approach to geo-engineering objects of hydraulic and hydroelectric projects

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Aiming at 3D modeling and analyzing problems of hydraulic and hydroelectric en-gineering geology,a complete scheme of solution is presented. The first basis was NURBS-TIN-BRep hybrid data structure. Then,according to the classified thought of the object-oriented technique,the different 3D models of geological and engi-neering objects were realized based on the data structure,including terrain class,strata class,fault class,and limit class;and the modeling mechanism was alterna-tive. Finally,the 3D integrated model was established by Boolean operations be-tween 3D geological objects and engineering objects. On the basis of the 3D model,a series of applied analysis techniques of hydraulic and hydroelectric engineering geology were illustrated. They include the visual modeling of rock-mass quality classification,the arbitrary slicing analysis of the 3D model,the geological analysis of the dam,and underground engineering. They provide powerful theoretical prin-ciples and technical measures for analyzing the geological problems encountered in hydraulic and hydroelectric engineering under complex geological conditions.

  17. 3D shape shearography with integrated structured light projection for strain inspection of curved objects

    NARCIS (Netherlands)

    Anisimov, A.; Groves, R.M.

    2015-01-01

    Shearography (speckle pattern shearing interferometry) is a non-destructive testing technique that provides full-field surface strain characterization. Although real-life objects especially in aerospace, transport or cultural heritage are not flat (e.g. aircraft leading edges or sculptures), their i

  18. 长距离胶带机在水电工程砂石料系统工程中的应用%Application of Long-distance Rubber Belt Conveyor in Aggregate & Sand Processing System of Hydropower Projects

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    文章从长距离胶带机的设计、施工要求及在国内外各个工地的砂石料生产中的应用等方面,对长距离胶带机的使用进行综合性比较,论证了长距离胶机在水电工程中应用的推广意义。%Application of the long-distance rubber belt conveyor is comprehensively compared, and the development significance of the conveyor in the hydropower projects is demonstrated in terms of its design, construction requirements and its applications in the aggregate&sand processing operation on the hydropower projects site both at home and abroad.

  19. Those Obscure Objects: Projections and Puppets of Desire Between Literature and Cinema

    Directory of Open Access Journals (Sweden)

    Claudio Panella

    2013-05-01

    Full Text Available The paper deals with one of the most popular female projections or phantoms of male desire, that is the charmer who never cedes, by comparing some literary and cinematic texts. This “allumeuse” which turns men into puppets in a dynamic of impossible seduction is the protagonist of La Femme et le Pantin (1898 by Pierre Louÿs (1870-1925, whose unforgettable Conchita from Sevilla was inspired by the young Charpillon who maddened the expert seducer Casanova. Conchita’s fame was deepened by the numerous adaptations of the text for the screen, especially von Sternberg’s The Devil is a Woman (1935 starring Marlene Dietrich, Duvivier’s La Femme et le Pantin (1959 with Brigitte Bardot, and Buñuel’s free and outstanding reinterpretation in Cet obscur objet du désir (1977. In the end, the adaptation of the novel Singularidades de uma Rapariga Loura (1874 by Portuguese Eça de Queirós (1845-1900 which Manoel de Oliveira directed in 2009 will be evoked  to argue that the unattainable female character could represent a projection of the male protagonists’ desire and romantic idealizations as well as of their fears and bourgeois conventions.

  20. WMO Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS): Research Implementation Status

    Science.gov (United States)

    Nickovic, Slobodan; Barrie, Leonard

    2010-05-01

    Assessment System (SDS-WAS) in order to improve the capabilities of countries affected by dust to reduce risks associated with airborne sand and dust. This project is in response to the desire of more than 40 WMO member countries to improve capabilities for more reliable sand and dust storm forecasts. The project has strong crosscutting features: it relies on real-time delivery of products; it integrates research communities (modelling, observation groups, and effects) and communities of practice (e.g. medical, aeronautical, agricultural users). There are two already established SDS-WAS nodes (Asian and North-Africa-Europe-Middle East) that coordinate implementation of the project objectives at regional levels. This presentation will review current status and future steps in the project implementation.

  1. An NAFP Project: Use of Object Oriented Methodologies and Design Patterns to Refactor Software Design

    Science.gov (United States)

    Shaykhian, Gholam Ali; Baggs, Rhoda

    2007-01-01

    In the early problem-solution era of software programming, functional decompositions were mainly used to design and implement software solutions. In functional decompositions, functions and data are introduced as two separate entities during the design phase, and are followed as such in the implementation phase. Functional decompositions make use of refactoring through optimizing the algorithms, grouping similar functionalities into common reusable functions, and using abstract representations of data where possible; all these are done during the implementation phase. This paper advocates the usage of object-oriented methodologies and design patterns as the centerpieces of refactoring software solutions. Refactoring software is a method of changing software design while explicitly preserving its external functionalities. The combined usage of object-oriented methodologies and design patterns to refactor should also benefit the overall software life cycle cost with improved software.

  2. The Objectives of the Radioscience Experiment in Luna-Resource and Luna-Glob Space Projects

    CERN Document Server

    Gromov, V D

    2015-01-01

    Two radio-science instruments have included into the Luna-Glob and Luna-Resource projects in the frame of Russian Luna exploration program: the lander's radio beacon and the orbiter's receiver. Three types of experiments are planned: orbital doppler measurements, VLBI interferometry, and Same Beam Interferometry (SBI). An accuracy of acceleration measurements in the Lander-Orbiter experiment coud be about 3-10 mGal. VLBI and SBI measurements of relative landers distancies with accuracy better than millimeters should give a tool for a accuracy improvement in the following scientific tasks: precise determination of orbital and rotational movement of the Earth and the Moon, determination of mass distribution and internal movements in the Moon's interior, check of general relativity effects.

  3. MEditerranean Supersite Volcanoes (MED-SUV) project: from objectives to results

    Science.gov (United States)

    Puglisi, Giuseppe; Spampinato, Letizia

    2017-04-01

    The MEditerranean Supersite Volcanoes (MED-SUV) was a FP7 3-year lasting project aimed at improving the assessment of volcanic hazards at two of the most active European volcanic areas - Campi Flegrei/Vesuvius and Mt. Etna. More than 3 million people are exposed to potential hazards in the two areas, and the geographic location of the volcanoes increases the number of people extending the impact to a wider region. MED-SUV worked on the (1) optimisation and integration of the existing and new monitoring systems, (2) understanding of volcanic processes, and on the (3) relationship between the scientific and end-user communities. MED-SUV fully exploited the unique multidisciplinary long-term in-situ datasets available for these volcanoes and integrated them with Earth observations. Technological developments and implemented algorithms allowed better constraint of pre-, sin- and post-eruptive phases. The wide range of styles and intensities of the volcanic phenomena observed at the targeted volcanoes - archetypes of 'closed' and 'open' conduit systems - observed by using the long-term multidisciplinary datasets, exceptionally upgraded the understanding of a variety of geo-hazards. Proper experiments and studies were carried out to advance the understanding of the volcanoes' internal structure and processes, and to recognise signals related to impending unrest/eruptive phases. Indeed, the hazard quantitative assessment benefitted from the outcomes of these studies and from their integration with cutting edge monitoring approaches, thus leading to step-changes in hazard awareness and preparedness, and leveraging the close relationship between scientists, SMEs, and end-users. Among the MED-SUV achievements, we can list the (i) implementation of a data policy compliant with the GEO Open Data Principles for ruling the exploitation and shared use of the project outcomes; (ii) MED-SUV e-infrastructure creation as test bed for designing an interoperable infrastructure to

  4. Pyro-chemistry within the FP7 ACSEPT Project-Program and Objective

    Energy Technology Data Exchange (ETDEWEB)

    Caravaca, Concha [CIEMAT/Nuclear Fission Division/URAA, Avda. Complutense, 22.Madrid 28040 (Spain); Bourg, Stephane [CEA/DEN/MAR/DRCP, CEA Marcoule. BP17171, 30207 Bagnols sur Ceze Cedex (France)

    2008-07-01

    Actinide recycling by partitioning and transmutation is considered as one of the most promising strategies to reduce the inventory of radioactive waste, thus contributing to make nuclear energy sustainable. To make advances beyond the current state of the art in pyrochemical separations processes, the Domain 2 (DM2) of ACSEPT has been built on considering a process approach based on system studied. Four work packages that represent the main steps of a process block diagram have been identified: head-end steps, core process development, and salt treatment for recycling and waste conditioning. The results obtained in this domain will be integrated in DM 3 (Process) in order to orientate the R and D studies of DM2 and to propose and validate flowsheets at the end of the project. The state of the art on pyrochemical separation within the European Community and the working program of ACSEPT in pyrometallurgy are presented in this work. (authors)

  5. Pyro-chemistry within the FP7 ACSEPT Project-Program and Objective

    Energy Technology Data Exchange (ETDEWEB)

    Caravaca, Concha [CIEMAT/Nuclear Fission Division/URAA, Avda. Complutense, 22.Madrid 28040 (Spain); Bourg, Stephane [CEA/DEN/MAR/DRCP, CEA Marcoule. BP17171, 30207 Bagnols sur Ceze Cedex (France)

    2008-07-01

    Actinide recycling by partitioning and transmutation is considered as one of the most promising strategies to reduce the inventory of radioactive waste, thus contributing to make nuclear energy sustainable. To make advances beyond the current state of the art in pyrochemical separations processes, the Domain 2 (DM2) of ACSEPT has been built on considering a process approach based on system studied. Four work packages that represent the main steps of a process block diagram have been identified: head-end steps, core process development, and salt treatment for recycling and waste conditioning. The results obtained in this domain will be integrated in DM 3 (Process) in order to orientate the R and D studies of DM2 and to propose and validate flowsheets at the end of the project. The state of the art on pyrochemical separation within the European Community and the working program of ACSEPT in pyrometallurgy are presented in this work. (authors)

  6. EURIPIDES, load tests on large driven piles in dense silica sands

    Energy Technology Data Exchange (ETDEWEB)

    Zuidberg, H.M.; Vergobbi, P.

    1996-12-31

    In 1995 an extensive load testing program was conducted on 30 inch pipe piles in dense silica sands similar to those found in the southern North Sea. A highly instrumented pile was driven at one location, extracted and redriven at a second location. A total of twelve static compression and tension load tests were performed at three penetration depths between 30 and 47 meters. Test objectives included acquiring reliable data on capacity of offshore type piles in sands which hitherto were hardly available and to understand the failure mechanisms in order to improve current foundation design. The paper describes the design of the testing program and project organization and funding. Details of the test pile and instrumentation to measure the loads in the pile and the pile-sand interaction are highlighted with an emphasis on quality of the measurements. The field-work and innovative testing facilities are also described.

  7. Sand Dune Encroachment and Desertification Processes of the Rigboland Sand Sea, Central Iran.

    Science.gov (United States)

    Ahmady-Birgani, Hesam; McQueen, Kenneth G; Moeinaddini, Mazaher; Naseri, Hamidreza

    2017-05-08

    Early studies on sand dune movement and desertification in Iran have not always been convincingly demonstrated because of problems with the field-based measurements. In some areas where various land uses have been engulfed by aeolian sand dunes, desertification is clear, but in other less settled areas, it may not be so obvious. The objective of this study is to demonstrate encroachments of the Rigboland sand sea, central Iran, in its different directions and variable magnitude rates. Determining the rate and direction of the sand sea movements is critical for specifying which lands should be prioritized and quickly protected. The study has trialed a change detection technique which uses a Cross-Tabulation module to compare two available LandsatTM images over the Rigboland sand sea. This indicates that within a ten-year span (from 1988 to 1998) more than 200 ha/yr were added to the Rigboland sand sea, from the alluvial fan landforms in the eastern upstream, outer margins of the Rigboland sand sea. Coupled with GIS techniques, this type of analysis of the remote sensing (RS) images provides an effective tool for the monitoring and prognostication of sand dune movement and sand sea change.

  8. An object tracking and global localization method using the cylindrical projection of omnidirectional image

    Institute of Scientific and Technical Information of China (English)

    孙英杰; 曹其新; 洪炳熔

    2004-01-01

    We present an omnidirectional vision system we have implemented to provide our mobile robot with a fast tracking and robust localization capability. An algorithm is proposed to do reconstruction of the environmentfrom the omnidirectional image and global localization of the robot in the context of the Middle Size League RoboCup field. This is accomplished by learning a set of visual landmarks such as the goals and the corner posts. Due to the dynamic changing environment and the partially observable landmarks, four localization cases are discussed in order to get robust localization performance. Localization is performed using a method that matches the observed landmarks, i.e. color blobs, which are extracted from the environment. The advantages of the cylindrical projection are discussed giving special consideration to the characteristics of the visual landmark and the meaning of the blob extraction. The analysis is established based on real time experiments with our omnidirectional vision system and the actual mobile robot. The comparative studies are presented and the feasibility of the method is shown.

  9. Influence green sand system by core sand additions

    Directory of Open Access Journals (Sweden)

    N. Špirutová

    2012-01-01

    Full Text Available Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this contribution is: “How the green sand systems are influenced by core sands?”This effect is considered by determination of selected technological properties and degree of green sand system re-bonding. From the studies, which have been published yet, there is not consistent opinion on influence of core sand dilution on green sand system properties. In order to simulation of the effect of core sands on the technological properties of green sands, there were applied the most common used technologies of cores production, which are based on bonding with phenolic resin. Core sand concentration added to green sand system, was up to 50 %. Influence of core sand dilution on basic properties of green sand systems was determined by evaluation of basic industrial properties: moisture, green compression strength and splitting strength, wet tensile strength, mixture stability against staling and physical-chemistry properties (pH, conductivity, and loss of ignition. Ratio of active betonite by Methylene blue test was also determined.

  10. Convergence of Subjective Outcome and Objective Outcome Evaluation Findings: Insights Based on the Project P.A.T.H.S.

    Directory of Open Access Journals (Sweden)

    Daniel T. L. Shek

    2007-01-01

    Full Text Available A total of 546 students participated in the Tier 1 Program of the P.A.T.H.S. Project responded to the Chinese Positive Youth Development Scale (CPYDS at pretest and posttest and the Subjective Outcome Scale (SOS at posttest. Result showed that the SOS was internally consistent. The SOS total scores were significantly related to measures of global satisfaction and the participants' degree of sharing with others, thus giving support to its construct validity. Factor analysis revealed that there were three dimensions of the scale and the related subscales were significantly correlated among themselves. Based on the significant relationships between the SOS measures of perceived program effectiveness and posttest CPYDS scores as well as changes in CPYDS scores, the present study revealed the convergence of subjective outcome evaluation findings and objective outcome evaluation findings in the P.A.T.H.S. Project.

  11. Association of objectively measured physical activity and physical fitness with menopause symptoms. The Flamenco Project.

    Science.gov (United States)

    Aparicio, V A; Borges-Cosic, M; Ruiz-Cabello, P; Coll-Risco, I; Acosta-Manzano, P; Špacírová, Z; Soriano-Maldonado, A

    2017-10-01

    The primary aim was to analyze the association of moderate-to-vigorous physical activity (MVPA) with menopause symptomatology and its overall impact. A secondary/exploratory aim was to assess the association of different components of physical fitness with menopause symptomatology. This cross-sectional study comprised 191 perimenopausal women from Southern Spain (age range 45-60 years, mean age 52.6 ± 4.5 years). The Blatt-Kupperman Menopausal Index was used to evaluate menopause symptomatology. Objectively measured MVPA was registered with accelerometry. Physical fitness was assessed with the Senior Fitness Test battery plus handgrip strength and sit-and-reach tests. After adjustment for multiple confounders, MVPA was only inversely associated with vertigo (r = -0.185, p < 0.05) and palpitations (r = -0.148, p < 0.05). Upper-body flexibility was inversely associated with the Blatt-Kupperman Menopausal Index global score (r = -0.147, p < 0.05). This test was also inversely associated with vertigo (r = -0.230, p < 0.01) and arthralgia (r = -0.168, p < 0.05). Lower-body muscle strength was associated with lower nervousness (r = -0.171, p < 0.05). Cardiorespiratory fitness was inversely associated with paresthesia (r = -0.158, p < 0.05), vertigo (r = -0.219, p < 0.01), fatigue (r = -0.159, p < 0.05) and arthralgia (r = -0.180, p < 0.05). The main findings of the present study indicate a weak association of objectively measured MVPA with menopause symptomatology. Exploratory analyses suggest that upper-body flexibility was associated with slightly lower overall menopause impact whereas neither MVPA nor any physical fitness components studied were associated with vasomotor symptoms.

  12. Developing a Sand Management Plan for Galveston Island

    Science.gov (United States)

    2015-10-16

    US Army Corps of Engineers BUILDING STRONG® Developing a Sand Management Plan for Galveston Island Ashley E. Frey, P. E. Research Civil...GenCade Alternatives • Sand Management Alternatives and Plan • Beach Nourishment Project 2 Innovative solutions for a safer, better world...BUILDING STRONG® Problem Statement/Approach Recommend a long-term plan of actions to better manage sands on Galveston Island Initial Tasks

  13. Sands cykliske styrke

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo

    1992-01-01

    Sands cykliske styrke kan beskrives ved Cyclic Liquefaction, Mobilisering, Stabilization og Instant Stabilization. I artiklen beskrives hvorfor Stabilization og Instant Stabilization ikke observeres, når sands udrænede styrke undersøges i triaxial celler, der anvender prøver med dobbelt prøvehøjde....

  14. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Bødker, Lars Bødker

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...

  15. Effects of full-scale beach renovation on fecal indicator levels in shoreline sand and water.

    Science.gov (United States)

    Hernandez, Rafael J; Hernandez, Yasiel; Jimenez, Nasly H; Piggot, Alan M; Klaus, James S; Feng, Zhixuan; Reniers, Ad; Solo-Gabriele, Helena M

    2014-01-01

    Recolonization of enterococci, at a non-point source beach known to contain high background levels of bacteria, was studied after a full-scale beach renovation project. The renovation involved importation of new exogenous sand, in addition to infrastructure improvements. The study's objectives were to document changes in sand and water quality and to evaluate the relative contribution of different renovation activities towards these changes. These objectives were addressed: by measuring enterococci levels in the sand and fecal indicator bacteria levels (enterococci and fecal coliform) in the water, by documenting sediment characteristics (mineralogy and biofilm levels), and by estimating changes in observable enterococci loads. Analysis of enterococci levels on surface sand and within sediment depth cores were significantly higher prior to beach renovation (6.3-72 CFU/g for each sampling day) when compared to levels during and after beach renovation (0.8-12 CFU/g) (P < 0.01). During the renovation process, sand enterococci levels were frequently below detection limits (<0.1 CFU/g). For water, exceedances in the regulatory thresholds that would trigger a beach advisory decreased by 40% for enterococci and by 90% for fecal coliform. Factors that did not change significantly between pre- and post- renovation included the enterococci loads from animals (approx. 3 × 10(11) CFU per month). Factors that were observed to change between pre- and post- renovation activities included: the composition of the beach sand (64% versus 98% quartz, and a significant decrease in biofilm levels) and loads from direct stormwater inputs (reduction of 3 × 10(11) CFU per month). Overall, this study supports that beach renovation activities contributed to improved sand and water quality resulting in a 50% decrease of observable enterococci loads due to upgrades to the stormwater infrastructure. Of interest was that the change in the sand mineralogy also coincided with changes in biofilm

  16. Involving stakeholders in the evaluation of community alcohol projects: finding a balance between subjective insight and objective facts.

    Science.gov (United States)

    Boots, Kevin; Midford, Richard

    2007-01-01

    The role played by key community representatives in the evaluation of community alcohol projects differs according to the evaluation paradigm adopted. In evaluations that adopt a positivist, experimental design they are cast in the role of independent informants. In post-positivist evaluations they are seen as having an interest in the evaluation and accordingly are considered active stakeholders. However, the degree to which stakeholders can be actively engaged in an evaluation varies considerably along a number of dimensions. Four dimensions of the stakeholder role--stakeholder inclusiveness, participation mode, participation frequency, and evaluation role--are examined in the context of eight evaluation theories. This is integrated into a model that links these dimensions to an object-subject continuum of stakeholder involvement. The model facilitates systematic consideration of these dimensions and will assist evaluators in achieving their desired balance of subjective insight and objective fact.

  17. Shape and motion reconstruction from 3D-to-1D orthographically projected data via object-image relations.

    Science.gov (United States)

    Ferrara, Matthew; Arnold, Gregory; Stuff, Mark

    2009-10-01

    This paper describes an invariant-based shape- and motion reconstruction algorithm for 3D-to-1D orthographically projected range data taken from unknown viewpoints. The algorithm exploits the object-image relation that arises in echo-based range data and represents a simplification and unification of previous work in the literature. Unlike one proposed approach, this method does not require uniqueness constraints, which makes its algorithmic form independent of the translation removal process (centroid removal, range alignment, etc.). The new algorithm, which simultaneously incorporates every projection and does not use an initialization in the optimization process, requires fewer calculations and is more straightforward than the previous approach. Additionally, the new algorithm is shown to be the natural extension of the approach developed by Tomasi and Kanade for 3D-to-2D orthographically projected data and is applied to a realistic inverse synthetic aperture radar imaging scenario, as well as experiments with varying amounts of aperture diversity and noise.

  18. Project overview of OPTIMOS-EVE: the fibre-fed multi-object spectrograph for the E-ELT

    Science.gov (United States)

    Navarro, Ramón; Chemla, Fanny; Bonifacio, Piercarlo; Flores, Hector; Guinouard, Isabelle; Huet, Jean-Michel; Puech, Mathieu; Royer, Frédéric; Pragt, Johannes H.; Wulterkens, Gerben; Sawyer, Eric C.; Caldwell, Martin E.; Tosh, Ian A. J.; Whalley, Martin S.; Woodhouse, Guy F. W.; Spanò, Paolo; Di Marcantonio, Paolo; Andersen, Michael I.; Dalton, Gavin B.; Kaper, Lex; Hammer, François

    2010-07-01

    OPTIMOS-EVE (OPTical Infrared Multi Object Spectrograph - Extreme Visual Explorer) is the fibre fed multi object spectrograph proposed for the European Extremely Large Telescope (E-ELT), planned to be operational in 2018 at Cerro Armazones, Chile). It is designed to provide a spectral resolution of 6000, 18000 or 30000, at wavelengths from 370 nm to 1.7 μm, combined with a high multiplex (>200) and a large spectral coverage. Additionally medium and large IFUs are available. The system consists of three main modules: a fibre positioning system, fibres and a spectrograph. The recently finished OPTIMOS-EVE Phase-A study, carried out within the framework of the ESO E-ELT instrumentation studies, has been performed by an international consortium consisting of institutes from France, Netherlands, United Kingdom and Italy. All three main science themes of the E-ELT are covered by this instrument: Planets and Stars; Stars and Galaxies; Galaxies and Cosmology. This paper gives an overview of the OPTIMOS-EVE project, describing the science cases, top level requirements, the overall technical concept and the project management approach. It includes a description of the consortium, highlights of the science drivers and resulting science requirements, an overview of the instrument design and telescope interfaces, the operational concept, expected performance, work breakdown and management structure for the construction of the instrument, cost and schedule.

  19. An object-oriented 3D nodal finite element solver for neutron transport calculations in the Descartes project

    Energy Technology Data Exchange (ETDEWEB)

    Akherraz, B.; Lautard, J.J. [CEA Saclay, Dept. Modelisation de Systemes et Structures, Serv. d' Etudes des Reacteurs et de Modelisation Avancee (DMSS/SERMA), 91 - Gif sur Yvette (France); Erhard, P. [Electricite de France (EDF), Dir. de Recherche et Developpement, Dept. Sinetics, 92 - Clamart (France)

    2003-07-01

    In this paper we present two applications of the Nodal finite elements developed by Hennart and del Valle, first to three-dimensional Cartesian meshes and then to two-dimensional Hexagonal meshes. This work has been achieved within the framework of the DESCARTES project, which is a co-development effort by the 'Commissariat a l'Energie Atomique' (CEA) and 'Electricite de France' (EDF) for the development of a toolbox for reactor core calculations based on object oriented programming. The general structure of this project is based on the object oriented method. By using a mapping technique proposed in Schneider's thesis and del Valle, Mund, we show how this structuration allows us an easy implementation of the hexagonal case from the Cartesian case. The main attractiveness of this methodology is the possibility of a pin-by-pin representation by division of each lozenge into smaller ones. Furthermore, we will explore the use of non structured quadrangles to treat the circular geometry within a hexagon. It remains nevertheless, in the hexagonal case, the implementation of the acceleration of the internal iterations by the DSA (Diffusion Synthetic Acceleration) or the TSA. (authors)

  20. URBAN TREE CROWN PROJECTION AREA MAPPING WITH OBJECT BASED IMAGE ANALYSIS FOR URBAN ECOSYSTEM SERVICE INDICATOR DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    TAKÁCS ÁGNES

    2014-03-01

    Full Text Available The continuous expansion of built-up areas in the urban environment at the expense of green spaces brings up numerous environmental problems, for which accurate and efficient solutions should be found. The assessment of ecosystem services developed within the field of landscape ecology is playing an ever more important role in environmental sciences and thus may offer suitable answers. Such assessments can be carried out by developing indicators. Accordingly, in the case of urban trees, an accurate quantitative characterization of their services (such as e.g. carbon sequestration, pollutant removal and microclimate regulation is also needed. The aim of this study is to establish a generally applicable method based on indicator development, using widely available data. In the case of urban green spaces there are several services for which the development of proper indicators and evaluation methods requires a delineation of tree crowns, or at least the crown projection area. Accordingly, in our work, we map the crown projection area of a large and popular urban park of Szeged, Széchenyi square, using object-based image analysis on UltraCamD digital orthophotos. Following a multiresolution segmentation the classification of the resulting objects was carried out, using the eCognition image analysis software. Besides fulfilling the policy objectives related to the evaluation of urban ecosystem services, the produced crown base can also be used in several other types of urban ecological and urban climatological studies (e.g. urban climate modelling, human-comfort assessment. In this paper the first results are presented.

  1. Sand and Gravel Deposits

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset is a statewide polygon coverage of sand, gravel, and stone resources. This database includes the best data available from the VT Agency of Natural...

  2. Sand and Gravel Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes sand and gravel operations in the United States. These data were obtained from information reported voluntarily to the USGS by the aggregate...

  3. Method of Relating Grain Size Distribution to Hydraulic Conductivity in Dune Sands to Assist in Assessing Managed Aquifer Recharge Projects: Wadi Khulays Dune Field, Western Saudi Arabia

    KAUST Repository

    Lopez Valencia, Oliver M.

    2015-11-12

    Planning for use of a dune field aquifer for managed aquifer recharge (MAR) requires that hydraulic properties need to be estimated over a large geographic area. Saturated hydraulic conductivity of dune sands is commonly estimated from grain size distribution data by employing some type of empirical equation. Over 50 samples from the Wadi Khulays dune field in Western Saudi Arabia were collected and the grain size distribution, porosity, and hydraulic conductivity were measured. An evaluation of 20 existing empirical equations showed a generally high degree of error in the predicted compared to the measured hydraulic conductivity values of these samples. Statistical analyses comparing estimated versus measured hydraulic conductivity demonstrated that there is a significant relationship between hydraulic conductivity and mud percentage (and skewness). The modified Beyer equation, which showed a generally low prediction error, was modified by adding a second term fitting parameter related to the mud concentration based on 25 of the 50 samples analyzed. An inverse optimization process was conducted to quantify the fitting parameter and a new empirical equation was developed. This equation was tested against the remaining 25 samples analyzed and produced an estimated saturated hydraulic conductivity with the lowest error of any empirical equation. This methodology can be used for large dune field hydraulic conductivity estimation and reduce planning costs for MAR systems.

  4. Method of Relating Grain Size Distribution to Hydraulic Conductivity in Dune Sands to Assist in Assessing Managed Aquifer Recharge Projects: Wadi Khulays Dune Field, Western Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Oliver M. Lopez

    2015-11-01

    Full Text Available Planning for use of a dune field aquifer for managed aquifer recharge (MAR requires that hydraulic properties need to be estimated over a large geographic area. Saturated hydraulic conductivity of dune sands is commonly estimated from grain size distribution data by employing some type of empirical equation. Over 50 samples from the Wadi Khulays dune field in Western Saudi Arabia were collected and the grain size distribution, porosity, and hydraulic conductivity were measured. An evaluation of 20 existing empirical equations showed a generally high degree of error in the predicted compared to the measured hydraulic conductivity values of these samples. Statistical analyses comparing estimated versus measured hydraulic conductivity demonstrated that there is a significant relationship between hydraulic conductivity and mud percentage (and skewness. The modified Beyer equation, which showed a generally low prediction error, was modified by adding a second term fitting parameter related to the mud concentration based on 25 of the 50 samples analyzed. An inverse optimization process was conducted to quantify the fitting parameter and a new empirical equation was developed. This equation was tested against the remaining 25 samples analyzed and produced an estimated saturated hydraulic conductivity with the lowest error of any empirical equation. This methodology can be used for large dune field hydraulic conductivity estimation and reduce planning costs for MAR systems.

  5. Detection of Salmonella enterica Serovar Montevideo and Newport in Free-ranging Sea Turtles and Beach Sand in the Caribbean and Persistence in Sand and Seawater Microcosms.

    Science.gov (United States)

    Ives, A-K; Antaki, E; Stewart, K; Francis, S; Jay-Russell, M T; Sithole, F; Kearney, M T; Griffin, M J; Soto, E

    2017-09-01

    Salmonellae are Gram-negative zoonotic bacteria that are frequently part of the normal reptilian gastrointestinal flora. The main objective of this project was to estimate the prevalence of non-typhoidal Salmonella enterica in the nesting and foraging populations of sea turtles on St. Kitts and in sand from known nesting beaches. Results suggest a higher prevalence of Salmonella in nesting leatherback sea turtles compared with foraging green and hawksbill sea turtles. Salmonella was cultured from 2/9 and identified by molecular diagnostic methods in 3/9 leatherback sea turtle samples. Salmonella DNA was detected in one hawksbill turtle, but viable isolates were not recovered from any hawksbill sea turtles. No Salmonella was detected in green sea turtles. In samples collected from nesting beaches, Salmonella was only recovered from a single dry sand sample. All recovered isolates were positive for the wzx gene, consistent with the O:7 serogroup. Further serotyping characterized serovars Montevideo and Newport present in cloacal and sand samples. Repetitive-element palindromic PCR (rep-PCR) fingerprint analysis and pulsed-field gel electrophoresis of the 2014 isolates from turtles and sand as well as archived Salmonella isolates recovered from leatherback sea turtles in 2012 and 2013, identified two distinct genotypes and four different pulsotypes, respectively. The genotyping and serotyping were directly correlated. To determine the persistence of representative strains of each serotype/genotype in these environments, laboratory-controlled microcosm studies were performed in water and sand (dry and wet) incubated at 25 or 35°C. Isolates persisted for at least 32 days in most microcosms, although there were significant decreases in culturable bacteria in several microcosms, with the greatest reduction in dry sand incubated at 35°C. This information provides a better understanding of the epizootiology of Salmonella in free-ranging marine reptiles and the potential

  6. Calibration and 3D reconstruction of underwater objects with non-single-view projection model by structured light stereo imaging.

    Science.gov (United States)

    Wang, Yexin; Negahdaripour, Shahriar; Aykin, Murat D

    2016-08-20

    Establishing the projection model of imaging systems is critical in 3D reconstruction of object shapes from multiple 2D views. When deployed underwater, these are enclosed in waterproof housings with transparent glass ports that generate nonlinear refractions of optical rays at interfaces, leading to invalidation of the commonly assumed single-viewpoint (SVP) model. In this paper, we propose a non-SVP ray tracing model for the calibration of a projector-camera system, employed for 3D reconstruction based on the structured light paradigm. The projector utilizes dot patterns, having established that the contrast loss is less severe than for traditional stripe patterns in highly turbid waters. Experimental results are presented to assess the achieved calibrating accuracy.

  7. Vestled - Hvide Sande

    DEFF Research Database (Denmark)

    Juel-Christiansen, Carsten; Hesselbjerg, Marianne; Schønherr, Torben

    2009-01-01

    Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side......Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side...

  8. MECHANICAL REGENERATION OF SAND WASTE

    Directory of Open Access Journals (Sweden)

    D. I. Gnir

    2005-01-01

    Full Text Available The experimental activation of the sand regenerator of the firm SINTO is carried out at ОАО “MZOO". It is shown that sand grains are cleared from films of binding agents, that allows to use the treated sand for preparation of agglutinant and core sands.

  9. SeaDataNet : Pan-European infrastructure for marine and ocean data management - Project objectives, structure and components

    Science.gov (United States)

    Maudire, G.; Maillard, C.; Fichaut, M.; Manzella, G.; Schaap, D. M. A.

    2009-04-01

    SeaDataNet : Pan-European infrastructure for marine and ocean data management Project objectives, structure and components G. Maudire (1), C. Maillard (1), G. Manzella (2), M. Fichaut (1), D.M.A. Schaap (3), E. Iona (4) and the SeaDataNet consortium. (1) IFREMER, Brest, France (Gilbert.Maudire@ifremer.fr), (2) ENEA, La Spezia, Italy, (3) Mariene Informatie Service 'MARIS', Voorburg, The Netherlands, (4) Hellenic Centre for Marine Research-HCMR, Anavyssos, Greece. Since a large part of the earth population lives near the oceans or carries on activities directly or indirectly linked to the seas (fishery and aquaculture, exploitation of sea bottom resources, international shipping, tourism), knowledge of oceans is of primary importance for security and economy. However, observation and monitoring of the oceans remains difficult and expensive even if real improvements have been achieved using research vessels and submersibles, satellites and automatic observatories like buoys, floats and seafloor observatories transmitting directly to the shore using global transmission systems. More than 600 governmental or private organizations are active in observation of seas bordering Europe, but European oceanographic data are fragmented, not always validated and not always easily accessible. That highlights the need of international collaboration to tend toward a comprehensive view of ocean mechanisms, resources and changes. SeaDataNet is an Integrated research Infrastructure Initiative (I3) in European Union Framework Program 6 (2006 - 2011) to provide the data management system adapted both to the fragmented observation systems and to the users need for an integrated access to data, meta-data, products and services. Its major objectives are to: - encourage long-term archiving at national level to secure ocean data taking into account that all the observations made in the variable oceanic environment can never be remade if they are lost; - promote best practices for data

  10. 砂砾石土筑堤技术在北汝河堤防治理工程中的应用%Application of Sand and Gravel Soil Embankment Technology in Beiru River Dike Governance Project

    Institute of Scientific and Technical Information of China (English)

    刘美义; 金鑫

    2012-01-01

      堤防是世界上最早广为采用的一种重要防洪工程,筑堤是防御洪水泛滥、保护居民和工农业生产的主要措施。少占土地、就地取材是堤防工程设计的重要原则。对北汝河治理工程利用河床砂砾石筑堤技术进行了研究,提出了砂性土筑堤技术一般原则和应该注意的问题。%  Dike is an important flood control project adopted firstly and widely all over the world, and embankment is the main measure for defending flooding, protecting citizens, and industrial and agricultural production. Occupation of less land, and adoption of local resources are important principles in dike engineering design. The adoption of sand and gravel embankment technology on the riverbed of Beiru River governance project is studied, and the general principles and problems demanding attention of sandy soil embankment technique are proposed.

  11. The Optimization of the Time-Cost Tradeoff Problem in Projects with Conditional Activities Using of the Multi-Objective Charged System Search Algorithm (SMOCSS

    Directory of Open Access Journals (Sweden)

    M. K. Sharbatdar

    2016-11-01

    Full Text Available Abstract The appropriate planning and scheduling for reaching the project goals in the most economical way is the very basic issue of the project management. As in each project, the project manager must determine the required activities for the implementation of the project and select the best option in the implementation of each of the activities, in a way that the least final cost and time of the project is achieved. Considering the number of activities and selecting options for each of the activities, usually the selection has not one unique solution, but it consists of a set of solutions that are not preferred to each other and are known as Pareto solutions. On the other hand, in some actual projects, there are activities that their implementation options depend on the implementation of the prerequisite activity and are not applicable using all the implementation options, and even in some cases the implementation or the non-implementation of some activities are also dependent on the prerequisite activity implementation. These projects can be introduced as conditional projects. Much researchs have been conducted for acquiring Pareto solution set, using different methods and algorithms, but in all the done tasks the time-cost optimization of conditional projects is not considered. Thus, in the present study the concept of conditional network is defined along with some practical examples, then an appropriate way to illustrate these networks and suitable time-cost formulation of these are presented. Finally, for some instances of conditional activity networks, conditional project time-cost optimization conducted multi-objectively using known meta-heuristic algorithms such as multi-objective genetic algorithm, multi-objective particle swarm algorithm and multi-objective charged system search algorithm.

  12. Imaging of Acoustic Waves in Sand

    Energy Technology Data Exchange (ETDEWEB)

    Deason, Vance Albert; Telschow, Kenneth Louis; Watson, Scott Marshall

    2003-08-01

    There is considerable interest in detecting objects such as landmines shallowly buried in loose earth or sand. Various techniques involving microwave, acoustic, thermal and magnetic sensors have been used to detect such objects. Acoustic and microwave sensors have shown promise, especially if used together. In most cases, the sensor package is scanned over an area to eventually build up an image or map of anomalies. We are proposing an alternate, acoustic method that directly provides an image of acoustic waves in sand or soil, and their interaction with buried objects. The INEEL Laser Ultrasonic Camera utilizes dynamic holography within photorefractive recording materials. This permits one to image and demodulate acoustic waves on surfaces in real time, without scanning. A video image is produced where intensity is directly and linearly proportional to surface motion. Both specular and diffusely reflecting surfaces can be accomodated and surface motion as small as 0.1 nm can be quantitatively detected. This system was used to directly image acoustic surface waves in sand as well as in solid objects. Waves as frequencies of 16 kHz were generated using modified acoustic speakers. These waves were directed through sand toward partially buried objects. The sand container was not on a vibration isolation table, but sat on the lab floor. Interaction of wavefronts with buried objects showed reflection, diffraction and interference effects that could provide clues to location and characteristics of buried objects. Although results are preliminary, success in this effort suggests that this method could be applied to detection of buried landmines or other near-surface items such as pipes and tanks.

  13. Bituminous sands : tax issues

    Energy Technology Data Exchange (ETDEWEB)

    Patel, B. [PricewaterhouseCoopers LLP, Calgary, AB (Canada)

    2004-07-01

    This paper examined some of the tax issues associated with the production of bitumen or synthetic crude oil from oil sands. The oil sands deposits in Alberta are gaining more attention as the supplies of conventional oil in Canada decline. The oil sands reserves located in the Athabasca, Cold Lake and Peace River areas contain about 2.5 trillion barrels of highly viscous hydrocarbons called bitumen, of which nearly 315 billion barrels are recoverable with current technology. The extraction method varies for each geographic area, and even within zones and reservoirs. The two most common extraction methods are surface mining and in-situ extraction such as cyclic steam stimulation (CSS); low pressure steam flood; pressure cycle steam drive; steam assisted gravity drainage (SAGD); hot water flooding; and, fire flood. This paper also discussed the following general tax issues: bituminous sands definition; bituminous sands leases and Canadian development expense versus Canadian oil and gas property expense (COGPE); Canadian exploration expense (CEE) for surface mining versus in-situ methods; additional capital cost allowance; and, scientific research and experimental development (SR and ED). 15 refs.

  14. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...... test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. The Danish Triaxial Cell prescribes smooth pressure heads and specimens with equal height and diameter....... Four series with Id equal to 0.92, 0.87 0.76 and 0.55 have been performed....

  15. Multi-objective optimization of discrete time-cost tradeoff problem in project networks using non-dominated sorting genetic algorithm

    Science.gov (United States)

    Shahriari, Mohammadreza

    2016-03-01

    The time-cost tradeoff problem is one of the most important and applicable problems in project scheduling area. There are many factors that force the mangers to crash the time. This factor could be early utilization, early commissioning and operation, improving the project cash flow, avoiding unfavorable weather conditions, compensating the delays, and so on. Since there is a need to allocate extra resources to short the finishing time of project and the project managers are intended to spend the lowest possible amount of money and achieve the maximum crashing time, as a result, both direct and indirect costs will be influenced in the project, and here, we are facing into the time value of money. It means that when we crash the starting activities in a project, the extra investment will be tied in until the end date of the project; however, when we crash the final activities, the extra investment will be tied in for a much shorter period. This study is presenting a two-objective mathematical model for balancing compressing the project time with activities delay to prepare a suitable tool for decision makers caught in available facilities and due to the time of projects. Also drawing the scheduling problem to real world conditions by considering nonlinear objective function and the time value of money are considered. The presented problem was solved using NSGA-II, and the effect of time compressing reports on the non-dominant set.

  16. UK Frac Sand Resources

    OpenAIRE

    Mitchell, C J

    2015-01-01

    Although still just a glimmer in the gas man’s eye, the prospect of shale hydrocarbon (oil and gas) development in the UK has many companies thinking about the industrial minerals it will require. Chief amongst these is silica sand which is used as a ‘proppant’ in the hydraulic fracturing, or ‘fracking’, of shales to help release the gas. The UK has large resources of sand and sandstone, of which only a small proportion have the necessary technical properties that classify them as ‘silica san...

  17. New uses of gas in Canada : oil sands gas demand

    Energy Technology Data Exchange (ETDEWEB)

    Camarta, N. [Shell Canada Ltd., Calgary, AB (Canada)

    2003-07-01

    The relationship between the price of natural gas and the development of oil sands in northern Alberta was discussed with reference to Shell Canada's Athabasca Oil Sands Project (AOSP), its resource base and plans for future expansion. Several graphs were presented, depicting world scale resources, Canadian oil production, and the North American oil market. Graphs depicting future projections for oil sands natural gas demand and cogeneration capacity showed that the trend for both demand and capacity is steadily increasing. The AOSP is a large high quality reserve with low overburden. The project utilizes advanced bitumen clean-up technology and the site is equipped with a highly integrated refinery that exploits infrastructure synergies. Some of the risk factors associated with oil sand development were described as being capital costs, operating costs, commodity prices, labour supply, and the Kyoto Protocol. 24 figs.

  18. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  19. Faraday, Jets, and Sand

    NARCIS (Netherlands)

    Sandtke, M.; van der Meer, Roger M.; Versluis, Andreas Michel; Lohse, Detlef

    2003-01-01

    When a 6-mm layer of fine sand with an average grain size of 40 µm is poured into a cylindrical container and shaken vertically, thin jets are seen to emerge from an airy cloud of grains, almost like protuberances from the corona of the sun. A quasi two-dimensional setup reveals the jet-formation

  20. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  1. Speleothems and Sand Castles

    Science.gov (United States)

    Hance, Trevor; Befus, Kevin

    2015-01-01

    The idea of building sand castles evokes images of lazy summer days at the beach, listening to waves crash, enjoying salty breezes, and just unplugging for a while to let our inner child explore the wonderful natural toys beneath our feet. The idea of exploring caves might evoke feelings and images of claustrophobia or pioneers and Native…

  2. Virksomhedens sande ansigt

    DEFF Research Database (Denmark)

    Lundholt, Marianne Wolff

    2017-01-01

    Er modhistorier en byrde eller en styrke i forandringsprocesser? Hvad stiller vi op, når adgangen til organisationens sande identitet går gennem medarbejdernes modhistorier? Når vi sammenholder denne erkendelse med vores viden om, at medarbejdere helt naturligt afholder sig fra at videregive disse...

  3. Sand (CSW4)

    CSIR Research Space (South Africa)

    Estuarine and Coastal Research Unit

    1982-12-01

    Full Text Available This report is one of a series on Cape Estuaries being published under the general title "The Estuaries of the Cape, Part 2". The report provides information on sand estuary: historical background, abiotic and biotic characteristics. It is pointed...

  4. Sand supply to beaches

    Science.gov (United States)

    Aagaard, Troels

    2017-04-01

    In most cases, beaches and dunes are built by sand that has been transported onshore from the shoreface. While this has been known for a long time, we are still not able to quantitatively predict onshore sediment transport and sand supply to beaches. Sediment transport processes operating during brief, high-energy stormy conditions - when beaches erode and sand moves offshore - are fairly well known and they can be modelled with a reasonable degree of confidence. However, the slower onshore sand transport leading to beach recovery under low-to-moderate energy conditions - and the reason why beaches and dunes exist in the first place - is not yet well understood. This severely limits our capability to understand and predict coastal behaviour on long time scales, for example in response to changing sea level or wave conditions. This paper will discuss issues and recent developments in sediment transport measurement and prediction on the lower and upper shoreface and into the swash zone. The focus will be on the integration and upscaling of small-scale deterministic process measurements into parametric models that may increase modelling capabilities of coastal behaviour on larger temporal and spatial scales.

  5. Erosion phenomena in sand moulds

    Directory of Open Access Journals (Sweden)

    A. Chojecki

    2008-03-01

    Full Text Available Authors studicd the erosion phcnorncna in sand moulds pured with cast iron. Thc study comprises an evaluation of erosionresistance of thc three sands: grccn sand. sand bondcd with inorganic or organic bindcr. It was concluded that thc most resistant is [heclassic green sand with thc addition of 5 B coal dust. Resistance of the sand with organic binder is generally weak and dcvnds onkind of used raisin. Spccinl nztcntion was paid to the sands with no organic bindcr watcr glass and phospha~c. It was Sound that thcirrcsistance depends on dehydratation conditions. When the mould is stored in law humidity of atmosphcrc the very strong crosion canbe expected. It rcsul ts hrn thc micro fractures in the bridges of binders, joining the grains of the sable. This phcnomcna facilitates thetearing away of fragments of sand [tom the surface

  6. The Effect of Soil Particle Arrangement on Shear Strength Behavior of Silty Sand

    Directory of Open Access Journals (Sweden)

    Nik Norsyahariati Nik Daud

    2016-01-01

    Full Text Available The presence of fines in sandy soil is recognized as a problem in geotechnical engineering. It is often assumed that the strength and liquefaction potential of a soil decreases with increasing fines content. Sand with a significant amount of fines is always encountered in geotechnical engineering projects. The main interest of this paper is to study the effect of particles arrangement and stress behaviour on sand and silty sand sample. The objectives are to determine the basic properties as well as the morphological and mineralogical properties and the relationship of those properties to the stress behaviour of the soils. Sand-silt mixtures with fines contents of 20% and 40% were prepared and a series of testing was carried out to determine their basic properties, morphological and thin section properties, and mechanical properties by using direct shear box equipment. Results show that the basic properties and morphological properties of soil affect the mechanical behaviour of soil. Shape of the soil particle can influence the packing of the soil, hence altering the mechanical behaviour of the soil. From the thin section, the soil is observed to be well graded and have a dense packing while the minerals observed were mainly quartz and rutile.

  7. Traceability of optical length measurements on sand surfaces

    DEFF Research Database (Denmark)

    Mohaghegh, Kamran; Yazdanbakhsh, Seyed Alireza; Tiedje, Niels Skat

    2016-01-01

    This work concerns traceable measurements on moulds used in automatic casting lines made of green sand, which has a very low strength against the force of a contact probe. A metrological set-up was made based on the use of calibrated workpieces following ISO 15530-3 to determine the uncertainty...... of optical measurements on a sand surface. A new customised sand sample was developed using a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to that of green sand. The length of the sample was calibrated using a dial gauge set-up. An optical 3D...... scanner with fringe pattern projection was used to measure the length of a green sand sample (soft sample) with traceability transfer through the hard sample. Results confirm that the uncertainty of the optical scanner on the substituted hard sample is similar to that of the soft sample, so the hard...

  8. mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

    Directory of Open Access Journals (Sweden)

    Michelle Helena van Velthoven

    2013-12-01

    Full Text Available We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies.

  9. On Pluvial Compaction of Sand

    DEFF Research Database (Denmark)

    Jacobsen, Moust

    At the Institute of Civil Engineering in Aalborg model tests on dry sand specimens have been carried out during the last five years. To reduce deviations in test results, the sand laying technique has been carefully studied, and the sand mass spreader constructed. Preliminary results have been...

  10. Study on Key Technology of Using Shell Sand as Backfill for Sea Reclamation

    Institute of Scientific and Technical Information of China (English)

    LI Neng-hui; QU Yi-rong; HE Wen-qin; CHEN Hui

    2005-01-01

    The results of a study on the key technology of using shell sand, a kind of sea sand, as backfill for sea reclamation are described briefly. Laboratory tests show that the physical and mechanical properties of shell sand are as good as normal quartz sand. Based on the chemical test and durability test of shell sand it could be concluded that the influence of corrosion of shell sand by acid rain and sea water might be ignored in the evaluation of the safety and durability of the engineering project. The results of field improvement tests show that the bearing capacity of shell sand backfill foundation is more than 200 kPa after vibroflotation improvement or dynamic compaction improvement. The shell sand is a good backfill material for sea reclamation.

  11. Analyzing the Impact of the 2012 Ford Focus Target Hunt: Can Student Managed Projects Accomplish Both Academic and Corporate Objectives?

    Science.gov (United States)

    Aurand, Timothy W.; St. Clair, Jordan; Sullivan, Ursula

    2012-01-01

    Student-managed business projects offer students the opportunity to garner valuable real world experience while businesses can fulfill corporate responsibilities utilizing relatively inexpensive manpower. This paper describes an event marketing/social media marketing project completed in conjunction with Jackson-Dawson Communications, representing…

  12. Analyzing the Impact of the 2012 Ford Focus Target Hunt: Can Student Managed Projects Accomplish Both Academic and Corporate Objectives?

    Science.gov (United States)

    Aurand, Timothy W.; St. Clair, Jordan; Sullivan, Ursula

    2012-01-01

    Student-managed business projects offer students the opportunity to garner valuable real world experience while businesses can fulfill corporate responsibilities utilizing relatively inexpensive manpower. This paper describes an event marketing/social media marketing project completed in conjunction with Jackson-Dawson Communications, representing…

  13. Sand hazards on tourist beaches.

    Science.gov (United States)

    Heggie, Travis W

    2013-01-01

    Visiting the beach is a popular tourist activity worldwide. Unfortunately, the beach environment is abundant with hazards and potential danger to the unsuspecting tourist. While the traditional focus of beach safety has been water safety oriented, there is growing concern about the risks posed by the sand environment on beaches. This study reports on the death and near death experience of eight tourists in the collapse of sand holes, sand dunes, and sand tunnels. Each incident occurred suddenly and the complete burial in sand directly contributed to the victims injury or death in each case report.

  14. Fresh groundwater resources in a large sand replenishment

    Science.gov (United States)

    Huizer, Sebastian; Oude Essink, Gualbert H. P.; Bierkens, Marc F. P.

    2016-08-01

    The anticipation of sea-level rise and increases in extreme weather conditions has led to the initiation of an innovative coastal management project called the Sand Engine. In this pilot project a large volume of sand (21.5 million m3) - also called sand replenishment or nourishment - was placed on the Dutch coast. The intention is that the sand is redistributed by wind, current, and tide, reinforcing local coastal defence structures and leading to a unique, dynamic environment. In this study we investigated the potential effect of the long-term morphological evolution of the large sand replenishment and climate change on fresh groundwater resources. The potential effects on the local groundwater system were quantified with a calibrated three-dimensional (3-D) groundwater model, in which both variable-density groundwater flow and salt transport were simulated. Model simulations showed that the long-term morphological evolution of the Sand Engine results in a substantial growth of fresh groundwater resources, in all adopted climate change scenarios. Thus, the application of a local sand replenishment could provide coastal areas the opportunity to combine coastal protection with an increase of the local fresh groundwater availability.

  15. PROCESSING OF MONAZITE SAND

    Science.gov (United States)

    Calkins, G.D.; Bohlmann, E.G.

    1957-12-01

    A process for the recovery of thorium, uranium, and rare earths from monazite sands is presented. The sands are first digested and dissolved in concentrated NaOH, and the solution is then diluted causing precipitation of uranium, thorium and rare earth hydroxides. The precipitate is collected and dissolved in HCl, and the pH of this solution is adjusted to about 6, precipitating the hydroxides of thorium and uranium but leaving the rare earths in solution. The rare earths are then separated from the solution by precipitation at a still higher pH. The thorium and uranium containing precipitate is redissolved in HNO/sub 3/ and the two elements are separated by extraction into tributyl phosphate and back extraction with a weakly acidic solution to remove the thorium.

  16. Moving sand dunes

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    In several desert areas, the slow motion of sand dunes can be a challenge for modern human activities and a threat for the survival of ancient places or archaeological sites. However, several methods exist for surveying the dune fields and estimate their migration rate. Among these methods, the use of satellite images, in particular of those freely available on the World Wide Web, is a convenient resource for the planning of future human settlements and activities.

  17. Compressive Strength of Compacted Clay-Sand Mixes

    Directory of Open Access Journals (Sweden)

    Faseel Suleman Khan

    2014-01-01

    Full Text Available The use of sand to improve the strength of natural clays provides a viable alternative for civil infrastructure construction involving earthwork. The main objective of this note was to investigate the compressive strength of compacted clay-sand mixes. A natural clay of high plasticity was mixed with 20% and 40% sand (SP and their compaction and strength properties were determined. Results indicated that the investigated materials exhibited a brittle behaviour on the dry side of optimum and a ductile behaviour on the wet side of optimum. For each material, the compressive strength increased with an increase in density following a power law function. Conversely, the compressive strength increased with decreasing water content of the material following a similar function. Finally, the compressive strength decreased with an increase in sand content because of increased material heterogeneity and loss of sand grains from the sides during shearing.

  18. Coherent digital demodulation of single-camera N-projections for 3D-object shape measurement: co-phased profilometry.

    Science.gov (United States)

    Servin, M; Garnica, G; Estrada, J C; Quiroga, A

    2013-10-21

    Fringe projection profilometry is a well-known technique to digitize 3-dimensional (3D) objects and it is widely used in robotic vision and industrial inspection. Probably the single most important problem in single-camera, single-projection profilometry are the shadows and specular reflections generated by the 3D object under analysis. Here a single-camera along with N-fringe-projections is (digital) coherent demodulated in a single-step, solving the shadows and specular reflections problem. Co-phased profilometry coherently phase-demodulates a whole set of N-fringe-pattern perspectives in a single demodulation and unwrapping process. The mathematical theory behind digital co-phasing N-fringe-patterns is mathematically similar to co-phasing a segmented N-mirror telescope.

  19. Booming Sand Dunes

    Science.gov (United States)

    Vriend, Nathalie

    "Booming" sand dunes are able to produce low-frequency sound that resembles a pure note from a music instrument. The sound has a dominant audible frequency (70-105 Hz) and several higher harmonics and may be heard from far distances away. A natural or induced avalanche from a slip face of the booming dune triggers the emission that may last for several minutes. There are various references in travel literature to the phenomenon, but to date no scientific explanation covered all field observations. This thesis introduces a new physical model that describes the phenomenon of booming dunes. The waveguide model explains the selection of the booming frequency and the amplification of the sound in terms of constructive interference in a confined geometry. The frequency of the booming is a direct function of the dimensions and velocities in the waveguide. The higher harmonics are related to the higher modes of propagation in the waveguide. The experimental validation includes quantitative field research at the booming dunes of the Mojave Desert and Death Valley National Park. Microphone and geophone recordings of the acoustic and seismic emission show a variation of booming frequency in space and time. The analysis of the sensor data quantifies wave propagation characteristics such as speed, dispersion, and nonlinear effects and allows the distinction between the source mechanism of the booming and the booming itself. The migration of sand dunes results from a complicated interplay between dune building, wind regime, and precipitation. The morphological and morphodynamical characteristics of two field locations are analyzed with various geophysical techniques. Ground-penetrating radar images the subsurface structure of the dunes and reveal a natural, internal layering that is directly related to the history of dune migration. The seismic velocity increases abruptly with depth and gradually increases with downhill position due to compaction. Sand sampling shows local

  20. The Project Objectives and the Relational Degree Analysis of PPP Model%公私合营项目目标及其关联度分析

    Institute of Scientific and Technical Information of China (English)

    孙钦云; 王祖和; 李海霞; 邵钰

    2016-01-01

    The objectives system of PPP project was built by combining with the characteristics of public‐private part‐nership (PPP) project .Then the gray correlation analysis method was used to analyze the correlation between the PPP project . Firstly ,the PPP project target system includes quality schedule ,cost ,risk sharing and other eight objectives system .Second‐ly ,the basic principle and the calculation steps of the gray relational analysis method of the gray correlation degree analysis were introduced and then used in the analysis of the PPP project objectives .Finally the specific case was selected to analyze the relationship between the PPP project objectives .%结合公私合营(public‐private partnership ,PPP)项目特点构建PPP项目特有的目标体系,运用灰色关联度分析方法分析PPP项目目标之间的关联度。首先,经过分析研究得出PPP项目目标体系包括质量、进度、成本、风险合理分担等八大目标体系。其次,运用灰色关联分析方法分析 PPP项目目标关联度,具体介绍了灰色关联度分析法的基本原理以及计算步骤。最后结合具体案例分析PPP项目目标之间的关联度。

  1. Sediment mathematical model for sand ridges and sand waves

    Institute of Scientific and Technical Information of China (English)

    LI Daming; WANG Xiao; WANG Xin; LI Yangyang

    2016-01-01

    A new theoretical model is formulated to describe internal movement mechanisms of the sand ridges and sand waves based on the momentum equation of a solid-liquid two-phase flow under a shear flow. Coupling this equation with two-dimensional shallow water equations and wave reflection-diffraction equation of mild slope, a two-dimensional coupling model is established and a validation is carried out by observed hydrogeology, tides, waves and sediment. The numerical results are compared with available observations. Satisfactory agreements are achieved. This coupling model is then applied to the Dongfang 1-1 Gas Field area to quantitatively predict the movement and evolution of submarine sand ridges and sand waves. As a result, it is found that the sand ridges and sand waves movement distance increases year by year, but the development trend is stable.

  2. Object theatre

    DEFF Research Database (Denmark)

    Ryöppy, Merja; Heiberg, Andreas

    2015-01-01

    possibilities to emerge. We present a study in which the Object Theatre approach is applied to redesign socially shared everyday products that are located in public places. This project demonstrates how Object Theatre offers a broad perspective form which to explore and present product interactions....... In particular, it emphasises the understanding of a product by relating and changing perspectives, and takes into account context of use and diverse social settings....

  3. 77 FR 24980 - Record of Decision for Authorizing the Use of Outer Continental Shelf (OCS) Sand Resources in the...

    Science.gov (United States)

    2012-04-26

    ... (OCS) Sand Resources in the Martin County, Florida Hurricane Storm Damage Reduction Project AGENCY... Decision. SUMMARY: BOEM has issued a Record of Decision (ROD) to authorize the use of OCS sand resources by... agreement for the purpose of making sand available from a shoal on the OCS for placement on the beach...

  4. Project overview of OPTIMOS-EVE: the fibre-fed multi-object spectrograph for the E-ELT

    NARCIS (Netherlands)

    Navarro, R.; Chemla, F.; Bonifacio, P.; Flores, H.; Guinouard, I.; Huet, J.-M.; Puech, M.; Royer, F.; Pragt, J.H.; Wulterkens, G.; Sawyer, E.C.; Caldwell, M.E.; Tosh, I.A.J.; Whalley, M.S.; Woodhouse, G.F.W.; Spanò, P.; Di Marcantonio, P.; Andersen, M.I.; Dalton, G.B.; Kaper, L.; Hammer, F.

    2010-01-01

    OPTIMOS-EVE (OPTical Infrared Multi Object Spectrograph - Extreme Visual Explorer) is the fibre fed multi object spectrograph proposed for the European Extremely Large Telescope (E-ELT), planned to be operational in 2018 at Cerro Armazones (Chile). It is designed to provide a spectral resolution of

  5. Compressive behavior of fine sand.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Bradley E. (Air Force Research Laboratory, Eglin, FL); Kabir, Md. E. (Purdue University, West Lafayette, IN); Song, Bo; Chen, Wayne (Purdue University, West Lafayette, IN)

    2010-04-01

    The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trends were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.

  6. Sand dollar sites orogenesis

    Science.gov (United States)

    Amos, Dee

    2013-04-01

    The determinology of the humble sand dollars habitat changing from inception to the drastic evolution of the zone to that of present day. Into the cauldron along the southern Californian 'ring of fire' lithosphere are evidence of geosynclinals areas, metasedimentary rock formations and hydrothermal activity. The explanation begins with 'Theia' and the Moon's formation, battles with cometary impacts, glacial ages, epochs with evolutionary bottlenecks and plate tectonics. Fully illustrated the lecture includes localised diagrams and figures with actual subject photographic examples of plutonic, granitic, jade and peridodite. Finally, the origins of the materials used in the lecture are revealed for prosecution by future students and the enjoyment of interested parties in general.

  7. Sand Storms Trigger Alarm

    Institute of Scientific and Technical Information of China (English)

    LI LI

    2010-01-01

    @@ After an unusually humid winter with at least 10 snowfalls in Beijing, a severe andstorm blown by strong winds bringing with it thousands of tons of desert sand took many residents of the city by surprise.On the morning of March 20, Beijingers woke up to see clouds of yellow dust in the air and a sky that was an ominous orange in color.The loose soil and dust that had traveled htmdreds of miles from deserts in Mongolia and China's northwest blanketed Beijing's streets, covering parked vehicles, bikes, roofs and even plant life,as well as making its way into people's homes.

  8. Fortune Cookie Sand Dunes

    Science.gov (United States)

    2003-01-01

    MGS MOC Release No. MOC2-432, 25 July 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a field of small barchan sand dunes in the north polar region near 71.7oN, 51.3oW. Some of them are shaped like fortune cookies. The message these dunes provide: winds blow through this region from the lower right toward the upper left. The steep slip face slopes of these dunes, which point toward the upper left, indicate the wind direction. The scene is illuminated by sunlight from the upper right. The image is 3 km (1.9 mi) wide.

  9. A family of sand automata

    CERN Document Server

    Faulkner, Nicholas

    2012-01-01

    We study some dynamical properties of a family of two-dimensional cellular automata: those that arise from an underlying one dimensional sand automaton whose local rule is obtained using a latin square. We identify a simple sand automaton G whose local rule is algebraic, and classify this automaton as having equicontinuity points, but not being equicontinuous. We also show it is not surjective. We generalise some of these results to a wider class of sand automata.

  10. Dilatometric Characterization of Foundry Sands

    Directory of Open Access Journals (Sweden)

    M. Břuska

    2012-04-01

    Full Text Available The goal of this contribution is summary of physical – chemistry properties of usually used foundry silica and no – silica sands in Czech foundries. With the help of dilatometry analysis theoretical assumptions of influence of grain shape and size on dilatation value of sands were confirmed. Determined was the possibility of dilatometry analysis employment for preparing special (hybrid sands with lower and/or more linear character of dilatation.

  11. Layers, Landslides, and Sand Dunes

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] Released 27 October 2003This image shows the northern rim of one of the Valles Marineris canyons. Careful inspection shows many interesting features here. Note that the spurs and gullies in the canyon wall disappear some distance below the top of the canyon wall, indicating the presence of some smooth material here that weathers differently from the underlying rocks. On the floor of the canyon, there are remains from a landslide that came hurtling down the canyon wall between two spurs. Riding over the topography of the canyon floor are many large sand dunes, migrating generally from the lower right to upper left.Image information: VIS instrument. Latitude -14.1, Longitude 306.7 East (53.3 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  12. Triaxial tests in Fontainebleau sand

    DEFF Research Database (Denmark)

    Latini, Chiara; Zania, Varvara

    2016-01-01

    The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note that the tes......The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note...... that the testing procedure and the data processing were carried out according to the specifications of ETCS-F1.97....

  13. Investigating of the Knocking Out Properties of Moulding Sands with New Inorganic Binders Used for Castings of Non-ferrous Metal Alloys in Comparison with the Previously Used

    Directory of Open Access Journals (Sweden)

    I. Izdebska-Szanda

    2012-12-01

    Full Text Available The article presents the results of investigations, which make a fragment of the broad-scale studies carried out as a part of the projectPOIG.01.01.02-00-015/09 “Advanced materials and technologies”.One of the objectives of the introduction of new inorganic binders is to provide a good knocking out properties of moulding sands, whilemaintaining an appropriate level of strength properties.Therefore, a logical continuation of the previous studies were carried out the tests knocking out properties of moulding sands with newinorganic binders, including making moulds, pouring them by the chosen of non-ferrous metal alloys, knoking-out, and determining theknocking out work.The results of the study were related to the research results obtained by applying the moulding sand performed by existing technology.

  14. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  15. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  16. Achieving NHAS 90/90/80 Objectives by 2020: An Interactive Tool Modeling Local HIV Prevalence Projections

    Science.gov (United States)

    Kelly, Scott D.; Wortley, Pascale M.; Drenzek, Cherie L.

    2016-01-01

    Background Tools using local HIV data to help jurisdictions estimate future demand for medical and support services are needed. We present an interactive prevalence projection model using data obtainable from jurisdictional HIV surveillance and publically available data. Methods Using viral load data from Georgia’s enhanced HIV/AIDS Reporting System, state level death rates for people living with HIV and the general population, and published estimates for HIV transmission rates, we developed a model for projecting future HIV prevalence. Keeping death rates and HIV transmission rates for undiagnosed, in care/viral load >200, in care/viral load<200, and out of care (no viral load for 12 months) constant, we describe results from simulations with varying inputs projecting HIV incidence and prevalence from 2014 to 2024. Results In this model, maintaining Georgia’s 2014 rates for diagnosis, transitions in care, viral suppression (VS), and mortality by sub-group through 2020, resulted in 85% diagnosed, 59% in care, and 44% VS among diagnosed (85%/58%/44%) with a total of 67 815 PLWH, 33 953 in care, and more than 1000 new cases per year by 2020. Neither doubling the diagnosis rate nor tripling rates of re-engaging out of care PLWH into care alone were adequate to reach 90/90/80 by 2020. We demonstrate a multicomponent scenario that achieved NHAS goals and resulted in 63 989 PLWH, 57 546 in care, and continued annual prevalence increase through 2024. Conclusions Jurisdictions can use this HIV prevalence prediction tool, accessible at https://dph.georgia.gov/hiv-prevalence-projections to assess local capacity to meet future HIV care and social services needs. In this model, achieving 90/90/80 by 2020 in Georgia slowed but did not reverse increases in HIV prevalence, and the number of HIV-infected persons needing care and support services more than doubled. Improving the HIV care infrastructure is imperative. PMID:27459717

  17. Assessment and prevention of acute health effects of weather conditions in Europe, the PHEWE project: background, objectives, design

    Directory of Open Access Journals (Sweden)

    Anderson Hugh

    2007-04-01

    Full Text Available Abstract Background The project "Assessment and prevention of acute health effects of weather conditions in Europe" (PHEWE had the aim of assessing the association between weather conditions and acute health effects, during both warm and cold seasons in 16 European cities with widely differing climatic conditions and to provide information for public health policies. Methods The PHEWE project was a three-year pan-European collaboration between epidemiologists, meteorologists and experts in public health. Meteorological, air pollution and mortality data from 16 cities and hospital admission data from 12 cities were available from 1990 to 2000. The short-term effect on mortality/morbidity was evaluated through city-specific and pooled time series analysis. The interaction between weather and air pollutants was evaluated and health impact assessments were performed to quantify the effect on the different populations. A heat/health watch warning system to predict oppressive weather conditions and alert the population was developed in a subgroup of cities and information on existing prevention policies and of adaptive strategies was gathered. Results Main results were presented in a symposium at the conference of the International Society of Environmental Epidemiology in Paris on September 6th 2006 and will be published as scientific articles. The present article introduces the project and includes a description of the database and the framework of the applied methodology. Conclusion The PHEWE project offers the opportunity to investigate the relationship between temperature and mortality in 16 European cities, representing a wide range of climatic, socio-demographic and cultural characteristics; the use of a standardized methodology allows for direct comparison between cities.

  18. The object the metaphor the power and evergreen or the eighth way to make a hypermedia project fail

    Science.gov (United States)

    Warren, Bruce A.

    1990-01-01

    A patented software technique is described that is necessary and sufficient to keep hypermedia data bases current with the manufacturing technology. The technique proved its validity in four years of use in petrochemical plants. This technique is based on the following principles: (1) the data base must be object structured, i.e., all components must retain visible individuality; (2) the author must be seeing and experiencing the multimedia data objects as he creates; and (3) the hypermedia tools must possess power in the form of unlimited capacity.

  19. Contemporary Issues in Medicine--Medical Informatics and Population Health: Report II of the Medical School Objectives Project.

    Science.gov (United States)

    Academic Medicine, 1999

    1999-01-01

    The report of the Association of American Medical Colleges' Medical School Objectives Program presents the work of two expert panels. One, on medical informatics, identified five important physician roles: lifelong learner, clinician, educator, researcher, and manager. Another panel established a definition for "population health perspective"…

  20. Monitoring and Sampling Strategy for (Manufactured) Nano Objects Agglomerates and Aggregates (NOAA); Potential Added Value of the NANODEVICE Project

    NARCIS (Netherlands)

    Brouwer, D.H.; Lidén, G.; Asbach, C.; Berges, M.; Tongeren, M. van

    2014-01-01

    The production of nanomaterials and nano-enabled products is associated with the potential for workers' exposure to (manufactured) nano-objects' agglomerates and aggregates (NOAA). Workplace air monitoring studies have been conducted to assess the actual exposure; however, the methods and strategies

  1. Laboratory studies of dune sand for the use of construction industry in Sri Lanka

    Science.gov (United States)

    de Silva Jayawardena, Upali; Wijesuriya, Roshan; Abayaweera, Gayan; Viduranga, Tharaka

    2015-04-01

    With the increase of the annual sand demand for the construction industry the excessive excavation of river sand is becoming a serious environmental problem in Sri Lanka. Therefore, it is necessary to explore the possibility for an alternative to stop or at least to minimize river sand mining activities. Dune sand is one of the available alternative materials to be considered instead of river sand in the country. Large quantities of sand dunes occur mainly along the NW and SE coastal belt which belong to very low rainfall Dry Zone coasts. The height of dune deposits, vary from 1m to about 30 meters above sea level. The objective of this paper is to indicate some studies and facts on the dune sand deposits of Sri Lanka. Laboratory studies were carried out for visual observations and physical properties at the initial stage and then a number of tests were carried out according to ASTM standards to obtain the compressive strength of concrete cylinders and mortar cubes mixing dune sand and river sand in different percentages keeping a constant water cement ratio. Next the water cement ratio was changed for constant dune sand and river sand proportion. Microscopic analysis shows that the dune sand consist of 95 % of quartz and 5 % of garnet, feldspar, illmenite and other heavy minerals with clay, fine dust, fine shell fragments and organic matters. Grains are sub-rounded to angular and tabular shapes. The grain sizes vary from fine to medium size of sand with silt. The degree of sorting and particle size observed with dune sands are more suited with the requirement of fine aggregates in the construction industry. The test result indicates that dune sand could be effectively used in construction work without sieving and it is ideal for wall plastering due to its'-uniformity. It could also be effectively used in concrete and in mortars mixing with river sand. The best mixing ratio is 75% dune sand and 25% river sand as the fine aggregate of concrete. For mortar the mixing

  2. Fossil Energy Program report, 1 October 1976--30 September 1977. [Objectives, progress and plans for each contract or project

    Energy Technology Data Exchange (ETDEWEB)

    Dunning, H. Neal; Batchelor, James; Crim, Winfred; Furlong, Leroy; Harvie, Robert; Hunter, Juanita; Jones, William; Karnes, Anita; Ludwig, Linda; Miller, C. Lowell; Mills, G. Alex; Sacks, Stephen; Watkins, J. Wade; Watson, Coni; Weaver, Val

    1978-08-01

    This report is an integral part of the documentation system of the Fossil Energy Program of the Department of Energy. It contains descriptions of each contract and project, arranged in conformance with planning and budgetary documents. The results of contracts are reported at various intervals, depending on the type of contract, but at least annually. These reports are not listed individually in the ''Publications'' sections but are available from the National Technical Information Service, U.S. Department of Commerce, Springfield, Virginia 22161. The Department of Energy also publishes several abstract journals: Fossil Energy Update, Energy Research Abstracts, and Energy Abstracts for Policy Analysis.

  3. A sand wave simulation model

    NARCIS (Netherlands)

    Nemeth, A.A.; Hulscher, S.J.M.H.; Damme, van R.M.J.

    2003-01-01

    Sand waves form a prominent regular pattern in the offshore seabeds of sandy shallow seas. A two dimensional vertical (2DV) flow and morphological numerical model describing the behaviour of these sand waves has been developed. The model contains the 2DV shallow water equations, with a free water su

  4. Regeneration of dredged sand waves

    NARCIS (Netherlands)

    Hulscher, Suzanne J.M.H.; Knaapen, Michiel; Scholl, Olaf; Scholl, O.; Trenteseaux., A.; Garlan, T.

    2000-01-01

    Sand waves form a wavy pattern in the offshore sandy seabed. Since their crests reduce the navigability, it is important to know their evolution. A simple model is presented to estimate the recovery of sand wave amplitudes. This model is partially based on the similarity with sea ripples and

  5. The extraction of bitumen from western oil sands: Volume 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1997-11-26

    The program is composed of 20 projects, of which 17 are laboratory bench or laboratory pilot scale processes or computer process simulations that are performed in existing facilities on the University of Utah campus in north-east Salt Lake City. These tasks are: (1) coupled fluidized-bed bitumen recovery and coked sand combustion; (2) water-based recovery of bitumen; (3) oil sand pyrolysis in a continuous rotary kiln reactor; (4) oil sand pyrolysis in a large diameter fluidized bed reactor; (5) oil sand pyrolysis in a small diameter fluidized bed reactor; (6) combustion of spent sand in a transport reactor; (7) recovery and upgrading of oil sand bitumen using solvent extraction methods; (8) fixed-bed hydrotreating of Uinta Basin bitumens and bitumen-derived hydrocarbon liquids; (9) ebullieted bed hydrotreating of bitumen and bitumen derived liquids; (10) bitumen upgrading by hydropyrolysis; (11) evaluation of Utah`s major oil sand deposits for the production of asphalt, high-energy jet fuels and other specialty products; (12) characterization of the bitumens and reservoir rocks from the Uinta Basin oil sand deposits; (13) bitumen upgrading pilot plant recommendations; (14) liquid-solid separation and fine tailings thickening; (15) in-situ production of heavy oil from Uinta Basin oil sand deposits; (16) oil sand research and development group analytical facility; and (17) process economics. This volume contains an executive summary and reports for five of these projects. 137 figs., 49 tabs.

  6. The extraction of bitumen from western oil sands: Volume 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1997-11-26

    The program is composed of 20 projects, of which 17 are laboratory bench or laboratory pilot scale processes or computer process simulations that are performed in existing facilities on the University of Utah campus in north-east Salt Lake City. These tasks are: (1) coupled fluidized-bed bitumen recovery and coked sand combustion; (2) water-based recovery of bitumen; (3) oil sand pyrolysis in a continuous rotary kiln reactor; (4) oil sand pyrolysis in a large diameter fluidized bed reactor; (5) oil sand pyrolysis in a small diameter fluidized bed reactor; (6) combustion of spent sand in a transport reactor; (7) recovery and upgrading of oil sand bitumen using solvent extraction methods; (8) fixed-bed hydrotreating of Uinta Basin bitumens and bitumen-derived hydrocarbon liquids; (9) ebullieted bed hydrotreating of bitumen and bitumen derived liquids; (10) bitumen upgrading by hydropyrolysis; (11) evaluation of Utah`s major oil sand deposits for the production of asphalt, high-energy jet fuels and other specialty products; (12) characterization of the bitumens and reservoir rocks from the Uinta Basin oil sand deposits; (13) bitumen upgrading pilot plant recommendations; (14) liquid-solid separation and fine tailings thickening; (15) in-situ production of heavy oil from Uinta Basin oil sand deposits; (16) oil sand research and development group analytical facility; and (17) process economics. This volume contains reports on nine of these projects, references, and a bibliography. 351 refs., 192 figs., 65 tabs.

  7. Sand swimming lizard: sandfish

    CERN Document Server

    Maladen, Ryan D; Kamor, Adam; Goldman, Daniel I

    2009-01-01

    We use high-speed x-ray imaging to reveal how a small (~10cm) desert dwelling lizard, the sandfish (Scincus scincus), swims within a granular medium [1]. On the surface, the lizard uses a standard diagonal gait, but once below the surface, the organism no longer uses limbs for propulsion. Instead it propagates a large amplitude single period sinusoidal traveling wave down its body and tail to propel itself at speeds up to ~1.5 body-length/sec. Motivated by these experiments we study a numerical model of the sandfish as it swims within a validated soft sphere Molecular Dynamics granular media simulation. We use this model as a tool to understand dynamics like flow fields and forces generated as the animal swims within the granular media. [1] Maladen, R.D. and Ding, Y. and Li, C. and Goldman, D.I., Undulatory Swimming in Sand: Subsurface Locomotion of the Sandfish Lizard, Science, 325, 314, 2009

  8. 2010 oil sands performance report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    With the depletion of traditional energy resources and the rising demand for energy, oil sands have become an important energy resource for meeting energy needs. Oil sands are a mixture of water, sand, clay and bitumen which is recovered either through open pit mining or in situ drilling techniques. The bitumen is then converted into syncrude or sold to refineries for the production of gasoline, diesel or other products. Shell has oil sands operations in Alberta and the aim of this report is to present its 2010 performance in terms of CO2, water, tailings, land, and reclamation and engagement. This document covers several of Shell's operations in the Muskeg River and Jackpine mines, Scotford upgrader, Peace River, Orion, Seal, Cliffdale and Chipmunk. It provides useful information on Shell's oil sands performance to governments, environmental groups, First Nations, local communities and the public.

  9. Development of a multi-objective scheduling system for offshore projects based on hybrid non-dominated sorting genetic algorithm

    Directory of Open Access Journals (Sweden)

    Jinghua Li

    2015-03-01

    Full Text Available In order to enhance the efficiency of offshore companies, a multi-objective scheduling system based on hybrid non-dominated sorting genetic algorithm was proposed. An optimized model for multi-objective and multi-execution mode was constructed under the condition of taking time, cost, and resource into account, and then the mathematical model for the same was established. Moreover, the key techniques of the proposed system were elaborated, and the flowchart was designed. Aiming at the weaknesses of non-dominated sorting genetic algorithm which is short for non-dominated sorting genetic algorithm-II in the facet of local search and computational efficiency, Pareto-dominated simulated annealing algorithm was applied in search global solution. Finally, by simulation examples and industrial application, the robustness and outperformance of the improved algorithm were verified.

  10. Rational approach to anisotropy of sand

    Science.gov (United States)

    Wu, Wei

    1998-11-01

    The paper presents a constitutive model for the three-dimensional deformation-strength behaviour of inherently anisotropic sand. Based on non-linear tensorial functions, the model is developed without recourse to the concepts in plasticity theory such as yield surface and plastic potential. Benefited from the fact that no decomposition of strain into elastic and plastic parts is assumed, a unified treatment of anisotropic behaviour of deformation and strength is achieved. Anisotropy is characterized by a vector normal to the bedding plane. The extension of the constitutive model is furnished by incorporating the vector under consideration of the principle of objectivity and the condition of material symmetry. Distinct features of the model are its elegant formulation and its simple structure involving few material parameters. Model performance and comparison with experiments show that the model is capable of capturing the salient behaviour of anisotropic sand.

  11. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    Global applications of pesticides in agricultural production have led to the detection of trace amounts of pesticides in groundwater resources in levels exceeding the EU threshold limit for drinking water of 0.1 µg L-1. Pesticide-polluted groundwater may be remediated by inoculating waterworks sand...... filters with specific degrading bacteria. However, degradation efficiency is often hampered by poor adhesion and a lack of sustained catabolic activity of the introduced bacteria. The overall objective of this thesis was to investigate the significance of selected bacterial surface properties...... coincided with efficient mineralisation/degradation, and proposed the tfdC gene as a suitable marker for monitoring phenoxy acid degradation in strain PM2. Furthermore, when testing strain PM2s degradation performance in flow-through sand columns, we found that strain PM2 was able to sustain induced...

  12. The quality of environmental impact assessment in East Finland Objective 1 projects in North Savo area; Ympaeristoevaikutusten arvioinnin laatu Itae-Suomen tavoite 1 -ohjelman hankkeissa Pohjois-Savossa

    Energy Technology Data Exchange (ETDEWEB)

    Tiihonen, M.; Tuhkalainen, J.

    2006-01-15

    East Finland Objective 1 projects carried out in North Savo area from years 2000-2004 were studied. The projects were classified as environmentally positive when applying for funds. 63 projects were given points according to their environmental and human impacts by Rapid Impact Assessment Matrix (RIAM) -method. 25 projects were graded environmentally positive, 26 projects neutral and 12 projects environmentally negative. 59 projects were graded positive to humans and 4 neutral to humans. In the original environmental impact assessment of the projects human impacts were included in environmental impacts. In the study also the environmental knowledge and attitudes towards the environment and towards EIA of the project realizers and preparatory persons from the financiers were investigated by a questionnaire. Almost all of the project realizers considered EIA to be generally useful. Half of the project realizers thought that EIA was useful in their own project. According to the results the EIA works relatively well in East Finland Objective 1 projects but the criteria for classifying a project as environmentally positive should be considered through. Proposals from the project realizers and preparatory persons from the financiers for developing the process further include clear guidelines, considering the scope of the EIA and better assessing of social impacts. Uniformity was required from EIA, but on the other hand tailoring of the process to different kinds of projects was also asked for. In some projects the EIA could be totally given up. (orig.)

  13. Sand harm in taklimakan Desert highway and sand control

    Institute of Scientific and Technical Information of China (English)

    HANZhiwen; WANGTao; SUNQingwei; DONGZhibao; WANGXunming

    2003-01-01

    Reputed as a wonderful achievement of the world’s highway construction history,the Taklimakan Desert highway is nor facing serious sand drift encroachment problems due to its 447-km-long passage of sand sea consisting of crescent dunes,barchan chains,compound transverse dune ridges and complex megadunes.To solve some technical problems in the protection of the highway from sang drift encroachment,desert experts have been conducting the theoretical and applied studies on sand movement laws;causes,severities and time-space differentiation of sand drift damages;and control ways including mechanical,chemical and biological measures.In this paper the authors give an overall summry on the research contents and recent progress in the control of sand drift damages in China and hold that the theoretical researc results and practices in the prevention of sand drift encroachment on the cross-desert highway represnt a breakthrough and has an cpoch-making significance.Since the construction of protective forest along the cross-desert highway requires large amount of ground water,what will be its environmental consequence and whether it can effectively halt sand drift encroachment on the highway forever are the questions to be studied urgently.

  14. Parcperdue geopressure-geothermal project. Study a geopressured reservoir by drilling and producing a well in a limited geopressured water sand. Final technical report, September 28, 1979-December 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, J.R.; Stanley, J.G. (eds.)

    1984-01-15

    The behavior of geopressured reservoirs was investigated by drilling and producing a well in small, well defined, geopressured reservoir; and performing detailed pressure transient analysis together with geological, geophysical, chemical, and physical studies. The Dow-DOE L. R. Sweezy No. 1 well was drilled to a depth of 13,600 feet in Parcperdue field, just south of Lafayette, Louisiana, and began production in April, 1982. The production zone was a poorly consolidated sandstone which constantly produced sand into the well stream, causing damage to equipment and causing other problems. The amount of sand production was kept manageable by limiting the flow rate to below 10,000 barrels per day. Reservoir properties of size, thickness, depth, temperature, pressure, salinity, porosity, and permeability were close to predicted values. The reservoir brine was undersaturated with respect to gas, containing approximately 20 standard cubic feet of gas per barrel of brine. Shale dewatering either did not occur or was insignificant as a drive mechanism. Production terminated when the gravel-pack completion failed and the production well totally sanded in, February, 1983. Total production up to the sanding incident was 1.94 million barrels brine and 31.5 million standard cubic feet gas.

  15. The Moli-Sani Project, a randomized, prospective cohort study in the Molise region in Italy; design, rationale and objectives

    Directory of Open Access Journals (Sweden)

    Licia Iacoviello

    2007-06-01

    Full Text Available

    Background: Cardiovascular disease and malignancies account for more than 70% of all causes of mortality and morbidity in Italy. There is a subtle balance between genetic determinants and lifestyle, that often defines the line between health and sickness. So far studies aiming at identifying risk factors have mainly come from Northern Europe and the USA. It was to understand this balance between genetics and environmental determinants better, and to tailor appropriate preventive strategies for Italian and other Southern European populations, that theMoli-sani project was launched, transforming a small Italian region into a large scientific laboratory: the “Molise lab”.

    Methods: Each participant receives a thorough medical check-up at no cost to either him/her or the national health service, resulting in thousands of hours of free public health care. With a completely computerized system, Moli-sani is a “paperless” study, in which researchers and participants communicate using recently developed technologies such as mobile phone text messages (SMS. The newly established biological data bank (the “MoliBank” will be one of the largest in Europe. Results: Early results of 8000 participants so far show a slightly worrying pattern of risk factors for a Mediterranean population. The prevalence of obesity, hypertension and metabolic syndrome is growing at rates close to those of other Western countries. Hypertension and, to a lesser extent, high blood glucose levels, are under-diagnosed and underestimated by patients, and appropriate therapy appears under-used and not very successful. However, cholesterol management appears more efficient.

    Conclusions: Paying particular attention towards innovation and new technologies, theMoli-sani project has placed itself at the cutting edge of a new paradigm crossing research and prevention.

  16. Athabasca oil sands development : lessening the footprint

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, R. [Alberta Environment, AB (Canada)

    2005-07-01

    This presentation provided an overview of the oil sands development footprint from the perspectives of industry, environmental associations and regulatory agencies. A map of regional oil sands developments was presented along with details of land disturbance to date. Industry strategies for lessening the impact of land disturbance include compact space-efficient mining operations; good planning; and effective, progressive reclamation. A closure and reclamation model was presented, along with key reclamation challenges such as overburden. Issues concerning tailings sands were examined. Details of Syncrude's closure vision were presented, including details of the Mildred Lake site. Details of the Fort McMurray Environmental Association were presented as well as various regional multi-stakeholder initiatives. A background of Syncrude and Suncor operations was presented as well as development projection forecasts. Impacts to the Boreal region were examined. Details of land reclamation by Syncrude were provided, as well as a chart of cumulative disturbances. It was noted that recent applications have indicated numerous reclamation uncertainties, including long-term performance of landforms and the feasibility of developing trafficable tailings landforms. It was suggested that the ecosystem dynamics of the Boreal are poorly understood. Exacerbating factors include the degraded state of soils; viability of end pit lakes; and climate change. It was suggested that operators are proposing to deal with landscape and technology uncertainty using adaptive management strategies. Government responses to the oil sand development footprint include the encouragement of more research into tailings technologies, end pit lake viability and reclamation; and the identification of regional landscape ecological thresholds by the Cumulative Environmental Management Association (CEMA). It was concluded that uncertainty needs to be addressed via a variety of policy and management options

  17. Effect of Different Forcing Processes on the Longshore Sediment Transport at the Sand Motor, The Netherlands

    NARCIS (Netherlands)

    Kaji, A.O.; Luijendijk, A.P.; van Thiel de Vries, J.S.M.; De Schipper, M.A.; Stive, M.J.F.

    2014-01-01

    The Sand Motor is a pilot project of a ‘mega-nourishment’ built in the Dutch coast in 2011. In order to understand which conditions reshape those mega-nourishments the influence of different types of forcing on the longshore sediment transport along the Sand Motor has been assessed in this paper usi

  18. Effect of Different Forcing Processes on the Longshore Sediment Transport at the Sand Motor, The Netherlands

    NARCIS (Netherlands)

    Kaji, A.O.; Luijendijk, A.P.; van Thiel de Vries, J.S.M.; De Schipper, M.A.; Stive, M.J.F.

    2014-01-01

    The Sand Motor is a pilot project of a ‘mega-nourishment’ built in the Dutch coast in 2011. In order to understand which conditions reshape those mega-nourishments the influence of different types of forcing on the longshore sediment transport along the Sand Motor has been assessed in this paper

  19. 风力发电项目多目标决策研究%Study on multi-objective decision making in wind power projects

    Institute of Scientific and Technical Information of China (English)

    赵治

    2011-01-01

    Along with the rapid development of wind power, the wind power industry has become key renewable energy industry of China.How to choose a wind power project scientifically will not only influence the interests of investors, but also have the impact on the development and utilization of renewable energy.Based on the analytic hierarchy process method and critical elements that affect a wind power project, a multi-objective decision model for wind power projects evaluation is proposed to help investors select an appropriate wind farm project and to promote the development and utilization of wind energy.%随着风力发电技术的不断发展,风力发电已成为我国重点发展的可再生能源产业.如何科学有效地选择风电项目,既关系到投资商的切身利益,也关系到风能的有效开发利用.文章利用层次分析法,在分析风电项目关键影响因素的基础上,建立多目标决策的风电项目评价模型,以帮助开发商选择合适的风电场项目,促进风能的开发利用.

  20. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  1. Sand engine quells the coast's hunger for sand

    NARCIS (Netherlands)

    Van Dijk, T.

    2012-01-01

    An artificial peninsula at Ter Heijde is designed to feed the coast with sediment. Scientists are investigating whether this kind of sand engine could be the Netherlands’ answer to rising sea levels.

  2. Use of an integrated approach to characterize the physicochemical properties of foundry green sands

    Energy Technology Data Exchange (ETDEWEB)

    Carnin, Raquel L.P. [Tupy S.A., Rua Albano Schmidt 3.400, Joinville, Santa Catarina (Brazil); Folgueras, Marilena Valadares; Luvizao, Rubia Raquel; Correia, Sivaldo Leite [Universidade do Estado de Santa Catarina, Rua Paulo Malschitzki, s/numero - Campus Universitario Prof. Avelino Marcante, Bairro Zona Industrial Norte, Joinville, Santa Catarina (Brazil); Cunha, Carlos Jorge da [Universidade Federal do Parana, Centro Politecnico, Jardim das Americas, Curitiba, Parana (Brazil); Dungan, Robert S., E-mail: robert.dungan@ars.usda.gov [USDA-ARS, Northwest Irrigation and Soils Research Laboratory, 3793 North 3600 East, Kimberly, ID 83341 (United States)

    2012-09-10

    Highlights: Black-Right-Pointing-Pointer Physicochemical properties of fresh, spent, and landfilled foundry green sands were determined. Black-Right-Pointing-Pointer A phase composition model was postulated for each material based on thermogravimetric results. Black-Right-Pointing-Pointer Sand from the landfill was determined to be composed of almost pure silica sand. Black-Right-Pointing-Pointer Weathering is likely responsible for removing the coating materials from the green sands. Black-Right-Pointing-Pointer Landfilled sands may be suitable for reuse within the foundry or beneficial use applications. - Abstract: A fresh green sand, spent green sand, and a weathered spent green sand (wSGS) from a foundry landfill were analyzed using diffractometry, electron microscopy, fluorometry, granulometry, spectrometry, and thermogravimetry (TG). Our objective was to understand how the physicochemical properties of the foundry green sands change from their original form after being subjected to the casting process, then after weathering at the landfill. A quantitative phase composition model was also postulated for each material based on the TG results and it was found to be the most reliable and informative quantitative data for this type of residue. The weathered sample, that remained in a landfill for two years, was found to be composed of almost pure sand. Because of the weathering process, it may be possible to use the wSGS as a virgin sand replacement in the regeneration system or in geotechnical applications where bentonite would affect the properties of the final product.

  3. Coastal Sand Deposits 2006

    Data.gov (United States)

    California Department of Resources — The supplemental information lists the geology data files, by county, and the name of the ESRI shapefile used in the creation of this dataset. All data was projected...

  4. Impact of the Project P.A.T.H.S. in the Junior Secondary School Years: Objective Outcome Evaluation Based on Eight Waves of Longitudinal Data

    Directory of Open Access Journals (Sweden)

    Daniel T. L. Shek

    2012-01-01

    Full Text Available To assess the effectiveness of the Tier 1 Program of the Project P.A.T.H.S., a randomized group trial with eight waves of data collected was carried out. At the fifth year of data collection, 19 experimental schools (n=2, 662 students and 24 control schools (n=3, 272 students participated in the study. Analyses based on individual growth curve modeling showed that participants in the experimental schools displayed better positive youth development than did participants in the control schools in terms of different indicators derived from the Chinese Positive Youth Development Scale, including moral competence and behavioral competence and cognitive behavioral competencies. Significant results were also found when examining the trajectories of psychological development among control and experimental participants who perceived the program to be beneficial. Findings based on longitudinal objective outcome evaluation strongly suggest that the Project P.A.T.H.S. is effective in promoting positive development in Hong Kong secondary school students.

  5. Spectroscopic characterization of a Nigerian standard sand: Igbokoda sand

    CSIR Research Space (South Africa)

    Ojuri, OO

    2017-01-01

    Full Text Available the Middle Ordovician St. Peter Sandstone near Ottawa, Illinois, had been picked by the American Society for Testing and Materials (ASTM) as the reference sand to employ in testing cement and strength of concrete [9]. To the best of our knowledge... and magnetic resonance spectroscopic techniques due to its importance in cement, geotechnical/geo-environmental research in Nigeria. This should halt importation of standard silica sand for mortar and concrete testing...

  6. Saltation of Non-Spherical Sand Particles

    Science.gov (United States)

    Wang, Zhengshi; Ren, Shan; Huang, Ning

    2014-01-01

    Saltation is an important geological process and the primary source of atmospheric mineral dust aerosols. Unfortunately, no studies to date have been able to precisely reproduce the saltation process because of the simplified theoretical models used. For example, sand particles in most of the existing wind sand movement models are considered to be spherical, the effects of the sand shape on the structure of the wind sand flow are rarely studied, and the effect of mid-air collision is usually neglected. In fact, sand grains are rarely round in natural environments. In this paper, we first analyzed the drag coefficients, drag forces, and starting friction wind speeds of sand grains with different shapes in the saltation process, then established a sand saltation model that considers the coupling effect between wind and the sand grains, the effect of the mid-air collision of sand grains, and the effect of the sand grain shape. Based on this model, the saltation process and sand transport rate of non-spherical sand particles were simulated. The results show that the sand shape has a significant impact on the saltation process; for the same wind speed, the sand transport rates varied for different shapes of sand grains by as much as several-fold. Therefore, sand shape is one of the important factors affecting wind-sand movement. PMID:25170614

  7. The analysis of the existing typology of energy saving measures in the course of construction project implementation and real estate object operation

    Directory of Open Access Journals (Sweden)

    Kiseleva Ekaterina Aleksandrovna

    Full Text Available Today, speaking about the efficiency of energy saving measures it is necessary to analyze the consequences of alternative options of the use of renewables at reconstruction and updating of housing stock from the point of view of secondary energy use and by doing that to avoid negative consequences of greenhouse gases emissions. Thus special attention is paid as a rule to residential buildings. In addition to the assessment of the ideas of housing stock and power sources updating, the cost of construction materials in reconstruction projects, various concepts of reconstruction and economic consequences of the repair of buildings is also important. As a rule, the life cycle of a real estate object is longer, than the life cycle of the production process of the goods or service occurring on this object. Careful planning of the operation program of a real estate object already at the stage of its design and also its timely modernization according to new requirements play an important role throughout the whole life cycle of an object and its long-term and effective operation. The decision on the expediency of a construction project is made on the basis of the analysis of expenses for it. In practice it is quite seldom possible to take into account all the expenses for a constructed facility, that is the expenses arising at construction, operation, the contents and service of a real estate object during its existence. Often realization of more expensive solutions at the level of construction designs and equipment leads to considerable decrease in operational costs of a real estate object. Thus, without creation of a program of operation for this object it is very difficult to prove the expediency of more expensive resources and methods at construction, then it is determined by the minimum requirements. Nevertheless, the object not necessarily has to correspond to its initial state. As a rule, after some time the use of newer technical solutions is

  8. Silica Sand Identification using ALOS PALSAR Full Polarimetry on The Northern Coastline of Rupat Island, Indonesia

    Directory of Open Access Journals (Sweden)

    Husnul Kausarian

    2016-10-01

    Full Text Available Silica sand is one of the minerals which relatively abundant in Indonesia. One of the areas with abundant of silica sand distribution is the northern coastline of Rupat Island, Bengkalis district, Riau province, Indonesia. The distribution of silica sand in this island identified only on the northern coastline in this island. Some selected sample of silica sand was measured to get the percentage of silica sand mineral’s content using X-Ray Fluorescence (XRF. Two adjacent scenes of ALOS PALSAR full-polarimetry were used. The physical properties of silica sand sample such as dielectric constant were measured using dielectric probe kit in the frequency range from 0.3 to 3.0 GHz and used for calculating the backscattering coefficient and the difference characteristics of silica sand with another object. Freeman-Durdeen and Yamaguchi techniques were used to get the scattering decomposition of physical scattering from the incoherent object model based. Surface scattering is the clearest of Scattering decomposition to show silica sand identification compares with other decompositions. From surface scattering, the backscattering coefficient value of silica sand was calculated starting from -59 dB until -52 dB. These values were given by the surface roughness condition, where the roughness is slightly rough planar. The flat condition supported by the grain size of silica sand particles that have almost the same size and shape, that were conducted by using microscopic photograph testing.

  9. Aeolian sediment flux derived from a natural sand trap

    NARCIS (Netherlands)

    Weerd, van der A.J.; Wijnberg, K.M.

    2016-01-01

    In 2011, a mega-nourishment (the ‘Sand Motor’) was constructed along the Dutch Coast. Since it is a pilot project, its evolution is closely monitored. This paper presents first results on the temporal variation in aeolian sediment transport across the nourishment, based on (a) the rate of infill ove

  10. Laboratory investigation of the loading rate effects in sand

    NARCIS (Netherlands)

    Huy, N.Q.; Van Tol, A.F.; Hölscher, P.

    2006-01-01

    In order to improve the interpretation of the quasi-static (e.g. Statnamic) pile load tests, a research project has been started to investigate effects of the loading rate on the bearing capacity of a pile in sand. A series of laboratory tests has been carried out. The testing program consists of a

  11. Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2011-04-01

    Full Text Available Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires theapplication of reclamation methods adequate to their properties as well as special devices realizing tasks. The spent sands circulationsystem containing the same kind of moulding and core sands is optimal from the point of view of the expected reclamation results.However, in the face of a significant variability of applied technologies and related to them various reclamation methods, the need - of theobtained reclamation products assessment on the grounds of systematic criteria and uniform bases – arises, with a tendency of indicatingwhich criteria are the most important for the given sand system. The reclaimability results of the mixture of the spent moulding sand withGeko S bentonite and the spent core sand with the Kaltharz 404U resin hardened by acidic hardener 100 T3, are presented in the paper.Investigations were performed with regard to the estimation of an influence of core sands additions (10 –25% on the reclaimed materialquality. Dusts and clay content in the reclaim, its chemical reaction (pH and ignition loss were estimated. The verification of the reclaiminstrumental assessment was performed on the basis of the technological properties estimation of moulding sand with bentonite, where the reclaimed material was used as a matrix.

  12. Evaluation of Reclamability of Molding Sands with New Inorganic Binders

    Directory of Open Access Journals (Sweden)

    I. Izdebska-Szanda

    2012-04-01

    Full Text Available One of the purposes of the application of chemically modified inorganic binders is to improve knocking out properties and the related reclamability with previously used in foundry inorganic binder (water glass, which allowing the use of ecological binders for casting non- ferrous metals. Good knocking out properties of the sands is directly related to the waste sands reclamability, which is a necessary condition of effective waste management. Reclamation of moulding and core sands is a fundamental and effective way to manage waste on site at the foundry, in accordance with the Environmental Guidelines. Therefore, studies of reclamation of waste moulding and core sands with new types of inorganic binders (developed within the framework of the project were carried out. These studies allowed to determine the degree of recovery of useful, material, what the reclaimed sand is, and the degree of its use in the production process. The article presents these results of investigation. They are a part of broader research programme executed under the project POIG.01.01.02-00- 015/09 "Advanced materials and technologies".

  13. Management recommendations: Sand Lake Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Sand Lake National Wildlife Refuge, by a land use specialist. Recommendations, time frame and...

  14. FLOW FIELD CHARACTERISTICS OF THE SAND FUNNEL AND ITS ME-CHANICS OF SEDIMENT TRANSPORT

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The flow in funnel chamber is typical three-di-mensional flow. The experimental results of clear water flowfield and muddy water flow field show that the flow character-istics in the funnel chamber are favorable to the separation ofwater and sand. Tangential velocity sustains the vortexstrength of the funnel chamber, axial velocity is benefit to thesediment sinking, and radial velocity is benefit to sedimentmoving to desilting hole. So the sand funnel is successful insediment disposal. The sand funnel projection has also gooddesilting effectiveness in practice. Its average flushing dis-charge is 3% of inlet canal discharge, the sand disposal rate is100% for the sand with grain diameter of more than 0. 5mm,and is more than 90% for the sand with grain diameter of lessthan 0. 5mm.

  15. A two-phase procedure for a multi-objective programming problem with fuzzy coefficients based on group decision making for project selection

    Directory of Open Access Journals (Sweden)

    Miraç Eren

    2017-01-01

    Full Text Available Regional Development Agencies (RDAs play a major role in ensuring sustainability and reducing inter-regional and intra-regional development disparities in line with the principles and policies set in the National Development Plan and Programs. This is done by enhancing cooperation among the public and private sectors, as well as non-governmental organizations. To achieve these targets, RDAs use certain tools such as financial support programs, technical support programs, and the like. Accordingly, an effective evaluation mechanism is crucial in selecting projects that have more added value and higher multiplier effects. In this regard, determining the right parameters that assist in choosing the best projects should be clearly demonstrated. In this study, the selection of projects according to the evaluating criteria of support mechanisms considered by RDAs are discussed through the procedure provided by a practical solution methodology, which is an integration of fuzzy parametric programming (FPP and fuzzy linear programming (FLP. Later, a two-phase procedure is introduced to solve multi-objective fuzzy linear programming problems.

  16. Sonic Boom Research at NASA Dryden: Objectives and Flight Results from the Lift and Nozzle Change Effects on Tail Shock (LaNCETS) Project

    Science.gov (United States)

    Moes, Timothy R.

    2009-01-01

    The principal objective of the Supersonics Project is to develop and validate multidisciplinary physics-based predictive design, analysis and optimization capabilities for supersonic vehicles. For aircraft, the focus will be on eliminating the efficiency, environmental and performance barriers to practical supersonic flight. Previous flight projects found that a shaped sonic boom could propagate all the way to the ground (F-5 SSBD experiment) and validated design tools for forebody shape modifications (F-5 SSBD and Quiet Spike experiments). The current project, Lift and Nozzle Change Effects on Tail Shock (LaNCETS) seeks to obtain flight data to develop and validate design tools for low-boom tail shock modifications. Attempts will be made to alter the shock structure of NASA's NF-15B TN/837 by changing the lift distribution by biasing the canard positions, changing the plume shape by under- and over-expanding the nozzles, and changing the plume shape using thrust vectoring. Additional efforts will measure resulting shocks with a probing aircraft (F-15B TN/836) and use the results to validate and update predictive tools. Preliminary flight results are presented and are available to provide truth data for developing and validating the CFD tools required to design low-boom supersonic aircraft.

  17. Sustainable water management in Alberta's oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Byers, Bill; Usher, Robyn; Roach, Andrea [CH2M HILL, Englewood, CO (United States); Lambert, Gord; Kotecha, Prit [Suncor Energy Inc., Calgary (Canada)

    2012-07-01

    The Canadian Association of Petroleum Producers forecast published in 2011 predicts that oil production from oil sands will increase by 50% in the next 3 years and double by 2020. This rate of growth will result in significant pressure on water resources; water use per barrel of oil sands production is comparable to other energy resources - about 2.5 barrels of fresh water per barrel of oil produced are used by mining operations and 0.5 barrels by in-situ operations. Suncor Energy Inc. (Suncor) was the first company to develop the oil sands in northern Alberta and holds one of the largest oil sands positions in Canada. In 2010, Suncor announced plans to increase production to more than 1 million barrels of oil equivalent per day by 2020, which it plans to achieve through oil sands production growth of approximately 10% per year. Because water supply and potential impacts to water quality are critical to its future growth, in 2010-2011 Suncor conducted a risk assessment to identify water-related business risks related to its northern Alberta operations. The assessment identified more than 20 high level business risks in strategic water risk areas including water supply, water reuse, storm water management, groundwater, waste management and river water return. The risk assessment results prompted development of a strategic roadmap to guide water stewardship across Suncor's regional operations. The roadmap describes goals, objectives, and specific activities for each of six key water risk areas, and informs prioritization and selection of prospective water management activities. Suncor is not only exploring water within its own boundaries, but is also collaborating with other oil sands producers to explore ways of integrating its water systems through industry consortia; Suncor is a member of the Oil Sands Leadership Initiative and of the recently formed Canadian Oil Sands Innovation Alliance, among others. (author)

  18. University of Utah Oil Sand Research and Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.; Deo, M.D.; Fletcher, J.V.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1993-12-31

    An overview of the Oil Sand Research and Development Program at the University of Utah will be presented. It will include resource characterization of the Uinta Basin oils and deposits and bitumens and bitumen-derived liquid recovery and upgrading technology and product utilization. The characterization studies will include the Whiterocks and Asphalt Ridge oil sands. The discussion of recovery and upgrading technologies will include aqueous separation, thermal recovery processes; solvent extraction, and thermal and catalytic upgrading of bitumen and bitumen-derived heavy oils. Product evaluation studies will include jet fuels, diesel fuel, asphalt and specialty chemicals. Plans for the future of the project will be discussed.

  19. Using Large-Scale Roughness Elements to Control Sand and Dust Flux at the Keeler Dunes, Keeler, CA

    Science.gov (United States)

    Gillies, John; McCarley-Holder, Grace

    2014-05-01

    Controlling dust emission from areas that subsequently degrade air quality and threaten human and animal health and reduce the quality of life for people residing in proximity to such sources is necessary, but also challenging. Recent research has indicated that arrays of large roughness elements (height >0.3 m) can be used effectively to modulate sand transport and the associated dust emissions. Prediction of the rate of sand flux reduction as a function of downwind distance upon entering an array of roughness elements, and the equilibrium flux reduction in the interior of the array is possible using the known geometric properties of the roughness elements, their number, and published relationships. Air quality in the town of Keeler, CA (36 deg 29' 17.92" N, 117 deg 52' 24.62" W) is degraded by levels of particulate matter elements composed of solid elements and managed vegetation to meet sand and dust flux reduction criteria. This project has two major goals: 1) to demonstrate that solid roughness elements placed on areas of the Keeler Dunes immediately arrest sand movement to specified levels (target of 85% reduction), and 2) to assess whether native plant species, planted in the sheltered area of the solid roughness elements can effectively thrive and subsequently replace the solid roughness to achieve the desired sand flux reduction control efficiency. This poster describes the results related mostly to objective one, as considerable time has to pass before sufficient data will be obtained to evaluate the success of the planted and managed vegetation to achieve a control level provided by the solid element roughness array.

  20. An Investigation for Disposal of Drill Cuttings into Unconsolidated Sandstones and Clayey Sands

    Energy Technology Data Exchange (ETDEWEB)

    Mese, Ali; Dvorkin, Jack; Shillinglaw, John

    2000-09-11

    This project include experimental data and a set of models for relating elastic moduli/porosity/texture and static-to-dynamic moduli to strength and failure relationships for unconsolidated sands and clayey sands. The results of the project should provide the industry with a basis for wider use of oil base drilling fluids in water sensitive formations by implementing drill cutting injection into existing wells at abandoned formations and controlling fracture geometry to prevent ground water contamination.

  1. Effect of the coastal conservation due to beach nourishment of Totori sand dune coast

    OpenAIRE

    Y. Shibutani; Matsubara, Y.; Kuroiwa, M.

    2013-01-01

    Tottori Sand Dune Coast located at western part of Japan is a sandy beach with a length about 8km facing Sea of Japan. The coast has been eroded starting around 1940s and the beach nourishment project has been carried out to restore the shoreline since 2005 at Tottori Sand Dune Coast. In the project, the deposition sands at port and river mouth were transported to the erosional area and injected in the region of the offshore erosional area and the backshore area and the total volumes of the s...

  2. An Automated Software Package for the KISS Objective-Prism Survey for Emission-Line Galaxies. II. Recent Additions and Project Status

    Science.gov (United States)

    Frattare, L. M.; Salzer, J. J.

    1996-05-01

    We present an update on the KPNO International Spectroscopic Survey (KISS) project. KISS is a wide-field survey for extragalactic emission-line objects being carried out with the Burrell Schmidt at Kitt Peak. While we are utilizing the classical objective-prism technique to find strong-lined star-forming galaxies and AGNs, the use of CCD detectors and automated reduction software promise to make KISS a powerful tool for the study of activity in galaxies. We are currently completing our first survey strip (100 square degrees). The data consist of deep (to B = 20) objective-prism images, deep direct images in both B and V, and small-format photometric calibration images of each field. The KISS reduction package was designed to run under the IRAF image processing environment, and will eventually grow to be a complete IRAF package. Tasks added to the package over the past year include precise astrometry and photometry modules. The astrometry routines utilize the HST Guide Star Catalog to perform a full plate solution on the direct image of each Schmidt field, and then assign accurate equatorial coordinates to each object in the field. The photometry module performs aperture photometry on the direct images for all objects in the KISS database catalog, and provides routines to transfer the photometry calibration from the small-format images taken under photometric conditions to the large-format survey images. Extensive tests and modifications have also been carried out on the pre-existing software described by Herrero & Salzer (1995) in order to better fine-tune the reduction procedures and parameter settings. In addition to presenting a complete description of the new software, we describe the current status of the survey and present some preliminary characteristics of the sample. Other members of the KISS project include V. Lipovetsky & A. Kniazev (S.A.O.), T. Boroson (NOAO/USGP), T. Thuan (U. Virginia), J. Moody (BYU), Y. Izotov (Ukrainian Acad. Sci.), and J. Herrero

  3. 3D workflow for HDR image capture of projection systems and objects for CAVE virtual environments authoring with wireless touch-sensitive devices

    Science.gov (United States)

    Prusten, Mark J.; McIntyre, Michelle; Landis, Marvin

    2006-02-01

    A 3D workflow pipeline is presented for High Dynamic Range (HDR) image capture of projected scenes or objects for presentation in CAVE virtual environments. The methods of HDR digital photography of environments vs. objects are reviewed. Samples of both types of virtual authoring being the actual CAVE environment and a sculpture are shown. A series of software tools are incorporated into a pipeline called CAVEPIPE, allowing for high-resolution objects and scenes to be composited together in natural illumination environments [1] and presented in our CAVE virtual reality environment. We also present a way to enhance the user interface for CAVE environments. The traditional methods of controlling the navigation through virtual environments include: glove, HUD's and 3D mouse devices. By integrating a wireless network that includes both WiFi (IEEE 802.11b/g) and Bluetooth (IEEE 802.15.1) protocols the non-graphical input control device can be eliminated. Therefore wireless devices can be added that would include: PDA's, Smart Phones, TabletPC's, Portable Gaming consoles, and PocketPC's.

  4. Disturbance of the inclined inserting-type sand fence to wind-sand flow fields and its sand control characteristics

    Science.gov (United States)

    Cheng, Jian-jun; Lei, Jia-qiang; Li, Sheng-yu; Wang, Hai-feng

    2016-06-01

    The inclined inserting-type sand fence is a novel sand retaining wall adopted along the Lanxin High-Speed Railway II in Xinjiang for controlling and blocking sand movement. To verify the effectiveness of the new fence structure for sand prevention, a wind tunnel test was used for flow field test simulation of the sand fence. The results indicate that the inclined inserting-type sand fence was able to deflect the flow of the sand and was able to easily form an upward slant acceleration zone on the leeward side of the sand fence. As shown by the percentage change in sand collection rates on the windward side and the leeward side of the sand fence, the sand flux per unit area at 4 m height in the slant upward direction increased on the leeward side of the inclined inserting-type sand fence. By comparing the flow fields, this site is an acceleration zone, which also reaffirms the correspondence of wind-sand flow fields with the spatial distribution characteristic of the wind-carried sand motion. The field sand collection data indicates that under the effects of the inclined inserting-type sand fence, the sandy air currents passing in front and behind the sand fence not only changed in quality, but the grain composition and particle size also significantly changed, suggesting that the inclined inserting-type sand fence has a sorting and filtering effect on the sandy air currents that passed through. The fence retained coarse particulates on the windward side and fine particulates within the shade of the wind on the leeward side.

  5. Experimental investigation on heat transport in gravel-sand materials

    DEFF Research Database (Denmark)

    Maureschat, Gerald; Heller, Alfred

    1997-01-01

    out in a small size experiment. The experiment consists of a highly insulated box filled with two kinds of sand material crossed by a plastic heat pipe. Heat transfer is measured under dry and water satured conditions in a cross-section.The conclusions are clear. To obtain necessary heat conduction......The project is a basic study on the expected thermal behaviour of gravel storage initiated as a part of a research and demonstration gravel storage for seasonal heat storage.The goal of the investigation is to determine the heat transfer between heat pipes and sand-gravel storage media by carrying...... media no convectional heat transport is found. It would be relevant to extend the investigation to media that enables convectional heat transport. A last conclusion is that such experiments, necessary for proper designing of sand-gravel storage types, are a very cheap form of collecting information...

  6. Laboratory evaluation of rubidium as a long-lasting marker for bloodfeeding sand flies (Diptera: Psychodidae).

    Science.gov (United States)

    Mascari, T M; Stout, R W; Foil, L D

    2012-01-01

    The objective of this study was to evaluate the use of the trace element rubidium (Rb) as a long-lasting systemic biomarker for bloodfeeding females of the sand fly Phlebotomus papatasi Scopoli. Baits containing Rb chloride were found to be palatable to hamsters in this study. We were able to detect Rb using a portable X-ray fluorescence analyzer in all sand flies that fed on Rb-treated hamsters for at least 14 d postbloodmeal. We also detected Rb in sand flies that took a bloodmeal from hamsters up to 10 d after the hamsters were withdrawn from a Rb-treated diet. Results of this study constitute proof of concept for the incorporation of Rb chloride into rodent baits for marking bloodfeeding sand flies, and suggest that Rb marking could be used as a technique for evaluating rodent-targeted sand fly control methods and in ecological studies on sand flies.

  7. Optimal array of sand fences.

    Science.gov (United States)

    Lima, Izael A; Araújo, Ascânio D; Parteli, Eric J R; Andrade, José S; Herrmann, Hans J

    2017-03-24

    Sand fences are widely applied to prevent soil erosion by wind in areas affected by desertification. Sand fences also provide a way to reduce the emission rate of dust particles, which is triggered mainly by the impacts of wind-blown sand grains onto the soil and affects the Earth's climate. Many different types of fence have been designed and their effects on the sediment transport dynamics studied since many years. However, the search for the optimal array of fences has remained largely an empirical task. In order to achieve maximal soil protection using the minimal amount of fence material, a quantitative understanding of the flow profile over the relief encompassing the area to be protected including all employed fences is required. Here we use Computational Fluid Dynamics to calculate the average turbulent airflow through an array of fences as a function of the porosity, spacing and height of the fences. Specifically, we investigate the factors controlling the fraction of soil area over which the basal average wind shear velocity drops below the threshold for sand transport when the fences are applied. We introduce a cost function, given by the amount of material necessary to construct the fences. We find that, for typical sand-moving wind velocities, the optimal fence height (which minimizes this cost function) is around 50 cm, while using fences of height around 1.25 m leads to maximal cost.

  8. Integrated Multidisciplinary Optimization Objects Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During Phase I, M4 Engineering integrated a prototype system into OpenMDAO, a NASA GRC open-source framework. This prototype system was a proof-of-concept that M4...

  9. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  10. Physical Characterizations of Sands and Their Influence in Fall Velocity

    Directory of Open Access Journals (Sweden)

    R. M. Gabriel

    2008-01-01

    Full Text Available Cancun beach is one of the most important tourist resorts on the Mexican coast, and is of prime importance to the local and national economies. As a result of the intense use of the beach and the unavailability of sand reserves, the extreme weather events that occur in the region (hurricanes have permanently damaged the beach. Over the last two decades several strong hurricanes severely weakened the system, but hurricane Wilma, October 2005, caused devastating erosion to the beach. After Wilma, an emergency nourishment project was implemented pumping a volume of 2.7 million m3 of sand onto the beach. Clearly, the sand used for the nourishment has a different shape factor, diameter distribution and density property compared to the native sand. The main goal of this paper is to characterize and compare the fall velocities of sand samples taken in and around Cancun. The settling velocities obtained for several samples were compared with the empirical formulations proposed by various authors. The influence of several parameters measured in the laboratory is discussed and a new formulation is presented.

  11. [Research progress on plant diversity conservation in sand dune areas].

    Science.gov (United States)

    Liu, Zhi-min; Ma, Jun-ling

    2008-01-01

    The landscape in sand dune areas is characterized by the alternate distribution of sand dune and interdune lowland, and the unique floras in these areas are some endemic or rare plant species. In recent years, the decrease in plant species richness and the disappearance of some endemic or rare plant species in these areas have been received special attention, which were listed in the Program of International Biodiversity Conservation, and studied in many countries and districts. In this paper, the research progress in these fields was summarized from the aspects of significance of plant diversity conservation, formation mechanisms of plant diversity, ways of plant diversity conservation, roles of plant diversity research in the development of ecological theories, and important issues in operating plant diversity conservation project. To conserve plant diversity in sand dune areas, attentions should be paid to the differences in conservation goals (to maintain high species richness or to conserve endemic or rare species) among different regions, and the balances between the stabilization of active sand and the conservation of endemic or rare species, and the maintenance of high species richness and the conservation of endemic or rare species. It needed also to consider the sand dune and the interdune lowland as a unified landscape unit to explore the impacts of disturbances and habitat fragment on plant diversity.

  12. Spanish Multicenter Normative Studies (NEURONORMA Project): norms for the visual object and space perception battery-abbreviated, and judgment of line orientation.

    Science.gov (United States)

    Peña-Casanova, Jordi; Quintana-Aparicio, María; Quiñones-Ubeda, Sonia; Aguilar, Miquel; Molinuevo, José Luis; Serradell, Mónica; Robles, Alfredo; Barquero, María Sagrario; Villanueva, Clara; Antúnez, Carmen; Martínez-Parra, Carlos; Frank-García, Anna; Aguilar, María Dolores; Fernández, Manuel; Alfonso, Verónica; Sol, Josep M; Blesa, Rafael

    2009-06-01

    This study forms part of the Spanish Multicenter Normative Studies (NEURONORMA project). Normative data for people aged over 49 years are presented for selected tasks of the visual object and space perception battery (VOSP) and for the judgment of line orientation (JLO) test. Age-adjusted norms were derived from a sample of 341 participants who are cognitively normal and community-dwelling. Age- and education-adjusted norms are also provided. Years of education were modeled on age-scaled scores to derive regression equations that were applied for further demographic adjustments. The normative information provided here should prove useful for characterizing and interpreting individual test performances as well as comparing the scores from these tests with any other test using NEURONORMA norms.

  13. Regional Sustainable Development Strategy for the Athabasca Oil Sand Area : progress report July 2001

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, M.

    2001-07-01

    This report presents an update on the implementation of the Regional Sustainable Development Strategy for the Athabasca Oil Sands Area (RSDS) which was first released in July 1999 as a framework for managing the cumulative environmental effects of oil sands developments in Alberta to ensure sustainable development. The development of the Athabasca deposit has meant significant economic growth for northeastern Alberta, but also significant environmental impacts. The Cumulative Environmental Management Association (CEMA) is a regional multi-stakeholder group composed of government, industry, environmental organizations, and Aboriginal groups. Both CEMA and RSDS are working in partnership to ensure that environmental objectives are met. RSDS outlined activities and timelines for 14 different themes regarding environmental issues. The delivery of initial products is expected from the fall of 2001 to 2002. Individual product reports will be published and made available to the public as soon as objectives are developed and approved. CEMA has established 5 working groups and several subgroups that have established work plans, budgets and funding plans for their projects. The 5 working groups are as follows: (1) the sustainable ecosystems working group which will deal with issues regarding wildlife, landscapes, and cultural resources, (2) the trace metals and air contaminants working group, (3) nitrogen oxides and sulfur dioxide management working group, (4) the water working group, and (5) the reclamation working group. This paper described the challenges facing each group and the progress that has been made thus far. 1 tab., 3 figs.

  14. Sands at Gusev Crater, Mars

    Science.gov (United States)

    Cabrol, Nathalie A.; Herkenhoff, Kenneth E.; Knoll, Andrew H.; Farmer, Jack D.; Arvidson, Raymond E.; Grin, E.A.; Li, Ron; Fenton, Lori; Cohen, B.; Bell, J.F.; Yingst, R. Aileen

    2014-01-01

    Processes, environments, and the energy associated with the transport and deposition of sand at Gusev Crater are characterized at the microscopic scale through the comparison of statistical moments for particle size and shape distributions. Bivariate and factor analyses define distinct textural groups at 51 sites along the traverse completed by the Spirit rover as it crossed the plains and went into the Columbia Hills. Fine-to-medium sand is ubiquitous in ripples and wind drifts. Most distributions show excess fine material, consistent with a predominance of wind erosion over the last 3.8 billion years. Negative skewness at West Valley is explained by the removal of fine sand during active erosion, or alternatively, by excess accumulation of coarse sand from a local source. The coarse to very coarse sand particles of ripple armors in the basaltic plains have a unique combination of size and shape. Their distribution display significant changes in their statistical moments within the ~400 m that separate the Columbia Memorial Station from Bonneville Crater. Results are consistent with aeolian and/or impact deposition, while the elongated and rounded shape of the grains forming the ripples, as well as their direction of origin, could point to Ma'adim Vallis as a possible source. For smaller particles on the traverse, our findings confirm that aeolian processes have dominated over impact and other processes to produce sands with the observed size and shape patterns across a spectrum of geologic (e.g., ripples and plains soils) and aerographic settings (e.g., wind shadows).

  15. Environmental impact assessment in the Alberta oil sands area

    Energy Technology Data Exchange (ETDEWEB)

    Mackenzie, I.B.; Herasymuik, G.; Schmidt, N.; Kovats, Z.; Clipperton, K. [Golder Associates Ltd., Calgary, AB (Canada)

    2004-07-01

    Some of the activities associated with the Environmental Impact Assessment (EIA) process in oil sands operations in Alberta were reviewed with particular reference to key regional issues such as instream flow needs (IFN), basal water management, lake acidification potential, and climate change. The proven approaches to maintain timelines and maximize success were also discussed with reference to the factors that can be managed to promote an efficient application, review and approval process. It was noted that although the EIA process is well-defined and robust, it is evolving due to new challenges such as increasingly complex tools and new regulations. Alberta's Cumulative Environmental Management Association (CEMA) continuously refines environmental objectives for NOx, SOx, surface water, and the Muskeg River and the Athabasca River watersheds. In particular, much effort has gone into determining the water withdrawals from the Athabasca River during the winter months and its effect on resident fish populations. Operators must determine the viability of a project if studies of IFN indicate that there is limited river flow available for abstraction. This paper identified several factors that can be addressed to keep the process on schedule. These include planning, understanding issues, completing baseline surveys, and commanding the attention of regulators. 12 refs., 1 tab., 8 figs.

  16. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper. The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples,which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters,the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed,the saltation of high-speed sand particles and the creep of low-speed sand particles,respectively. The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic,particle size segregation and stratigraphy,but also in formation stages. In addition,three important speeds can be obtained by this method,which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  17. DPTM simulation of aeolian sand ripple

    Institute of Scientific and Technical Information of China (English)

    ZHENG XiaoJing; BO TianLi; XIE Li

    2008-01-01

    Aeolian sand ripple and its time evolution are simulated by the discrete particle tracing method (DPTM) presented in this paper.The difference between this method and the current methods is that the former can consider the three main factors relevant to the formation of natural aeolian sand ripples, which are the wind-blown sand flux above the sand bed formed by lots of sand particles with different di-ameters, the particle-bed collision and after it the rebound and ejection of sand particles in the sand bed, the saltation of high-speed sand particles and the creep of low-speed sand particles, respectively.The simulated aeolian sand ripple is close to the natural sand ripple not only in basic shape and characteristic, particle size segregation and stratigraphy, but also in formation stages.In addition, three important speeds can be obtained by this method, which are the propagation speed of the saturated aeolian sand ripple and the critical frictional wind speeds of emergence and disappearance of sand ripple.

  18. Dry reusing and wet reclaiming of used sodium silicate sand

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Based on the characteristics of used sodium silicate sand and the different use requirements for recycled sand, "dry reusing and wet reclaiming of used sodium silicate sand" is considered as the most suitable technique for the used sand. When the recycled sand is used as support sand, the used sand is only reused by dry process including breaking, screening, dust-removal, etc., and it is not necessary that the used sand is reclaimed with strongly rubbing and scraping method, but when the recycled sand is used as facing sand (or single sand), the used sand must be reclaimed by wet method for higher removal rate of the residual binders. The characteristics and the properties of the dry reused sand are compared with the wet reclaimed sand after combining the different use requirements of support sand and facing sand (or single sand), and above the most adaptive scheme has also been validated.

  19. Engineering report on drilling in the Sand Wash Basin, Colorado. [In support of NURE program

    Energy Technology Data Exchange (ETDEWEB)

    Callihan, M C

    1980-01-01

    The Sand Wash Basin Drilling project was conducted by Bendix Field Engineering Corporation in support of the US Department of Energy (DOE) National Uranium Resource Evaluation (NURE) program. This project consisted of 27 drill holes ranging in depth from 110 feet (33.5 m) to 1,995 feet (608.1 m). A total of 25,514 feet (7,471.9 m) was rotary drilled, and 1,593.5 feet (485.7 m) were cored resulting in a total of 26,107.5 feet (7,957.6 m) drilled for the project. The objective of the project was to provide comprehensive subsurface geologic data relevant to uranium mineralization. This was accomplished by drilling in major outcrop areas of the Browns Park Formation in Moffat and Routt Counties, Colorado. The project began May 18, 1979; drilling was completed November 4, 1979. Most site restoration and cleanup was completed during the fall of 1979 with the remainder to be completed during the spring of 1980.

  20. 多目标资源受限项目鲁棒调度研究%Research on Multi-Objective Robust Resource-Constrained Project Scheduling

    Institute of Scientific and Technical Information of China (English)

    庞南生; 孟俊姣

    2012-01-01

    由于资源受限项目调度属于NP-hard问题,传统的RCPSP主要集中于工期最短单一目标的基本同题研究,而忽略了项目调度对鲁棒性筹多目标属性特征的要求.本文以经典的串行进度生成机制为基础,引入了衡量项目稳定性的鲁棒性要素,创建了项目鲁棒调度串行生成机制(RSSGS),提出了项目鲁棒性的测度新指标,构建了优化鲁棒结构的工期最短和鲁棒性最大的双目标优化模型,并结合分层优化原理,设计了改进的SA算法.最后,采用算例验证了该模型的可行性和合理性.%The resource-constrained project scheduling problem is a NP-hard problem, but the traditional RCPSP still focuses on the single objective of makespan minimization and ignores the requirements of the multi-objective feature, such as, robustness. In this paper, based on the classical serial schedule generation scheme, a factor measuring the stability of activity is introduced and robust SSGS is put forward; with the proposition of a robust measure index, a bi-objective optimal model aimed at makespan minimization and robustness maximization is developed; and combined with the hierarchical optimization principle, an improved SA algorithm is presented. Finally, the results of the numerical example show that the model is feasible.

  1. Forces encountered by a sphere during impact into sand

    Science.gov (United States)

    Joubaud, Sylvain; Homan, Tess; Gasteuil, Y.; Lohse, Detlef; van der Meer, Devaraj

    2014-12-01

    We describe direct measurements of the acceleration of an object impacting on a loosely packed granular bed under various pressures, using an instrumented sphere. The sphere acts as a noninvasive probe that measures and continuously transmits the acceleration as it penetrates into the sand, using a radio signal. The time-resolved acceleration of the sphere reveals the detailed dynamics during the impact that cannot be resolved from the position information alone. Because of the unobstructed penetration, we see a downward acceleration of the sphere at the moment the air cavity collapses. The compressibility of the sand bed is observed through the oscillatory behavior of the acceleration curve for various ambient pressures; it shows the influence of interstitial air on the compaction of the sand as a function of time.

  2. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  3. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  4. Impact on sand and water

    NARCIS (Netherlands)

    Bergmann, R.P.H.M.

    2007-01-01

    In this thesis we investigate the impact of a body on sand and water. When a body impacts a free surface in the inertial regime the series of events is the following: On impact material is blown away in all directions and an impact cavity forms. Due to the hydrostatic pressure from the sides the cav

  5. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...

  6. Object and Objective Lost?

    DEFF Research Database (Denmark)

    Lopdrup-Hjorth, Thomas

    2015-01-01

    This paper explores the erosion and problematization of ‘the organization’ as a demarcated entity. Utilizing Foucault's reflections on ‘state-phobia’ as a source of inspiration, I show how an organization-phobia has gained a hold within Organization Theory (OT). By attending to the history...... of this organization-phobia, the paper argues that OT has become increasingly incapable of speaking about its core object. I show how organizations went from being conceptualized as entities of major importance to becoming theoretically deconstructed and associated with all kinds of ills. Through this history......, organizations as distinct entities have been rendered so problematic that they have gradually come to be removed from the center of OT. The costs of this have been rather significant. Besides undermining the grounds that gave OT intellectual credibility and legitimacy to begin with, the organization-phobia...

  7. experimental studies of sand production from unconsolidated ...

    African Journals Online (AJOL)

    ES Obe

    Production of sand during oil and gas exploration causes severe operational prob- ... duction such as risk of well failure, erosion of pipelines and surface facilities, sand separa- tion and disposal ... ment, theoretical and numerical analysis have.

  8. Research and Application of the Support Project of the Foundation Bearing Sand in Deep water%高地下水位含流沙基础开挖支护方案的研究和应用

    Institute of Scientific and Technical Information of China (English)

    黄少鹏

    2014-01-01

    This paper described the comprehensive research on the various measures for excavation support of the foun- dation bearing sand in deep water of the foundation drainage trench excavation construction in the municipal engineering of Angola Republic SãoPedro. And the author hoped to provide a useful reference for engineering construction schemes in sim- ilar geological conditions.%文章简述了在安哥拉共和国市政工程SãoPedro排水渠沟槽基础开挖施工中,通过对高地下水位、含流砂基础开挖支护的各种方案措施的综合研究,希望对有类似地质情况工程施工方案的研究和选择提供有益参考。

  9. Effects of oil sands sediments on fish

    Energy Technology Data Exchange (ETDEWEB)

    Parrott, J.; Colavecchia, M.; Hewitt, L.; Sherry, J.; Headley, J. [Environment Canada, Ottawa, ON (Canada); Turcotte, D.; Liber, K. [Saskatchewan Univ., Regina, SK (Canada)

    2010-07-01

    This paper described a collaborative project organized by Natural Resources Canada (NRCan) Panel of Energy Research and Development (PERD) with researchers from Environment Canada and the University of Saskatchewan. The 4-year study was conducted to assess the toxicity of oil sands sediments and river waters, and reclamation ponds and sediments on laboratory-raised fish. Three sediments from rivers were evaluated for their potential to cause adverse impacts on fathead minnow eggs and larvae for a period of 18 days. The study monitored hatching, larval survival, development, and growth. Naphthenic acids (NA), polycyclic aromatic hydrocarbons (PAHs) and metals were measured in the sediments to determine if the compounds can be correlated with observed toxicity. The study will also assess walleye eggs exposed to sediments, and in situ fish exposures. Toxicity identification and evaluation (TIE) studies will be conducted to isolate the fractions that may affect fish development and growth.

  10. Water supply and residual debris treatment for natural sand gravel processing system of Zaoshi project%皂市工程天然砂石加工系统供水及废渣处理

    Institute of Scientific and Technical Information of China (English)

    陈雯

    2000-01-01

    皂市水利枢纽工程的天然砂石加工系统位于渫水河左岸的漫滩地上,枯水期河水走右河槽。为了取到河水冲洗骨料,应用渗渠原理,在河漫滩下预埋集水管至左岸泵站的集水间。设两座沉渣池处理废水废渣。每座沉渣池的工作周期为14 d,即进水7 d,压实、脱水3~4 d,挖砂、清洗4~3 d。从设计上较好地解决了废水废渣的处理。对供水工程和废渣处理工艺流程作了详细介绍。%Natural sand gravel aggregate processing system for Zaoshi hydroporject is located on the left bank floodland of Xieshui river which flows along the right channel in dry season. In order to take water from the river to clean aggregate, applying seepage trench method, water collecting pipes are preembedded under the floodland and connected with sump pool of the left bank pump station. 2 sediment pools are set up for the waste water and residual debris disposal. The working period of each sediment pool is 14 days, 7 days for water intaking, 3~4 days for compaction and dewatering, 4~3 days for sand excavation and cleaning. The problem of the waste water and residual debris disposal is well solved in the design.

  11. Ganges Chasma Landing Site: Access to Sand Sheets, Wall Rock and Layered Mesa Material

    Science.gov (United States)

    Rice, James W., Jr.

    1999-06-01

    The floor of Ganges Chasma offers an ideal landing site for the MSP 2001 lander. This site is exquisite both in terms of engineering constraints and science objectives. The floor of Ganges Chasma is mantled with an extensive sand sheet. Sand sheets develop in conditions which are unfavorable for dune formation. These may include a high water table, periodic flooding, surface cementation, and coarse grained sands. The most extensive sand sheets on Earth are located in the eastern Sahara. These sheets have a relief of less than 1 m over wide areas and total thickness ranges from a few cm to 10 m. The surfaces of sand sheets are composed of granule to pebbly lag deposits. Sand sheets provide an extremely safe landing site and have very low relief. The safety concerns regarding slopes, rocks, and dust would be alleviated by the sand sheet. Furthermore, this vast sand sheet would allow the Marie Curie Rover to cover great distances. Rover navigability would be very easily compared to the tedious rock avoidance maneuvers that Sojourner had to accomplish. This exercise would be an important precursor test for the more capable Athena Rover which will execute longer traverses. Moreover, the Rover has already been "field tested" on sand at the JPL Mars sandbox. Dust should not be a problem: Thermal inertia is 7.7 to 8.9 cgs units. This site satisfies all engineering constraints.

  12. PRELIMINARY STUDY ON SAND-DUST STORM DISASTER AND COUNTERMEASURES IN CHINA

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    As a kind of natural disasters, sand-dust storms frequently occur in deserts and their surrounding areas.The occurrence of this disaster in China's northwest and north China has exerted an extremely adverse effect upon the environ-ment in China. The management of sand-dust storms is of a systematic project closely related with the environment suchas agriculture, ecosystem, forestry, water conservancy, meteorology and other aspects. Therefore, studies of the forma-tion, the basic features, causes, temporal-spatial distribution, developing-trend and related disasters of sand-dust stormsin China are conducted based on satellite data. The experience of sand-dust storms control and countermeasures in the Unit-ed States and some other countries are referred. Meanwhile, preliminary countermeasures relating to sand-dust storms inChina are proposed.

  13. UK silica sand resources for fracking

    OpenAIRE

    Mitchell, Clive

    2013-01-01

    UK silica sand resources for fracking Clive Mitchell, Industrial Minerals Specialist, British Geological Survey, Keyworth, Nottingham, NG12 5GG Email: Silica sand is high purity quartz sand that is mainly used for glass production, as foundry sand, in horticulture, leisure and other industrial uses. One specialist use is as a ‘proppant’ to enhance oil and gas recovery. This presentation will focus on this application, particularly for shale gas recovery where it is mo...

  14. Treating tar sands formations with karsted zones

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  15. Sand Lake National Wildlife Refuge/Wetland Management District annual habitat work plan 2005

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual habitat management plan outlines working habitat objectives for wetland habitats based on refuge purposes, professional judgment and experience for Sand...

  16. Sulfur biogeochemistry of oil sands composite tailings

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Lesley; Stephenson, Kate [Earth Sciences, McMaster University (Canada)], email: warrenl@mcmaster.ca; Penner, Tara [Syncrude Environmental Research (Canada)

    2011-07-01

    This paper discusses the sulfur biogeochemistry of oil sands composite tailings (CT). The Government of Alberta is accelerating reclamation activities on composite tailings. As a CT pilot reclamation operation, Syncrude is currently constructing the first freshwater fen. Minor unpredicted incidents with H2S gas released from the dewatering process associated with these reclamations have been reported. The objective of this study is to ascertain the connection between microbial activity and H2S generation within CT and to assess the sulfur biogeochemistry of untreated and treated (fen) CT over seasonal and annual timescales. The microbial geochemical interactions taking place are shown using a flow chart. CT is composed of gypsum, sand, clay and organics like naphthenic acids and bitumen. Sulfur and Fe cycling in mining systems and their microbial activities are presented. The chemistry and the processes involved within CT are also given along with the results. It can be said that the diverse Fe and S metabolizing microorganisms confirm the ecology involved in H2S dynamics.

  17. Sand Waves. Report 1. Sand Wave Shoaling in Navigation Channels

    Science.gov (United States)

    1992-09-01

    heights range from 0.8 m in the Minas Basin, Bay of Fundy (Dalrymple 1984) to 6.0 m in the Bahia Blanca Estuary, Argentina (Aliotta and Perillo 1987...26 PART IV: SITE-SPECIFIC SAND WAVE SHOALING PROBLEMS .. ........ 30 Columbia River Navigation Channel ........ ............... .. 30 Panama ...problem location discussed in this report is at St. Andrew Bay near Panama City, Florida. A relatively short section of the jettied inlet channel requires

  18. Experimental research on the mixed sand ratio and initial dry density of weathered sand improved expansive soil free load swelling rate

    Institute of Scientific and Technical Information of China (English)

    Yang Jun; Yang Zhi; Zhang Guodong; Tang Yunwei; Chen Hongping

    2014-01-01

    In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that: Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.

  19. Sinogram Affirmed Iterative Reconstruction (SAFIRE) versus weighted filtered back projection (WFBP) effects on quantitative measure in the COPDGene 2 test object.

    Science.gov (United States)

    Sieren, J P; Hoffman, E A; Fuld, M K; Chan, K S; Guo, J; Newell, J D

    2014-09-01

    Assessing pulmonary emphysema using Quantitative CT of the lung depends on accurate measures of CT density. Sinogram-Affirmed-Iterative-Reconstruction (SAFIRE) is a new approach for reconstructing CT data acquired at significantly lower doses. However, quantitative effects of this method remain unexplored. The authors investigated the effects on the median values of materials in the COPDGene2 test-object as a function of the reconstruction method [weighted filtered back projection (WFBP) versus SAFIRE], test-object size, dose, and material composition using a Siemens SOMATOM Definition FLASH CT scanner. The COPDGene2 test-object contains eight materials; acrylic, water, four foams (20 lb, 12 lb, lung-equivalent, and 4 lb emphysema-equivalent), internal and external-air. The test-object was scanned with three different outer ring sizes, simulating three different body habitus. There is an average size (36 cm) Ring A, large size (40 cm) Ring B, and small size Ring C (30 cm). The CT protocol used 120 kVp, 0.5 s rotation, 1.0 pitch, and a 0.6 slice collimation with progressively decreasing x-ray exposure values, 11.94-0.74 mGy. With a thorax length of 30 cm, the corresponding effective doses would be 5.01-0.31 mSv. The effects of using SAFIRE versus WFBP were assessed using a two tailed t-test for each ring size, material, and dose. Multivariable linear regression was used to evaluate the relative effects of ring size, material composition, dose, and reconstruction method on the measured median value in HU. SAFIRE versus WFBP, at the largest ring size and two lowest doses there was a significant difference in median values of 4 lb-foam, p<0.01. Using the smallest ring size at the lowest dose level there was a significant difference in the median value of 4 lb-foam, but the effect size was small, 1 HU. There is a significant difference in median values of both internal and external air using both the small and medium size rings at the three lowest dose levels, p<0

  20. EFFECTIVENESS OF THE SANDPITS SECURITY SYSTEM AGAINST MICROORGANISMS AND INTESTINAL PARASITES SAND CONTAMINATION

    Directory of Open Access Journals (Sweden)

    Magdalena Błaszak

    2015-09-01

    Full Text Available Playgrounds and sandpits (small architecture objects according to the Construction Law are subject to meticulous supervision, both at the design stage and subsequent status checks of the objects. One of the requirements arising from the need to protect playgrounds from animals is the necessity for fencing the object (Regulation of 31 December 2002 On Safety and Hygiene in Public and Private Schools and Institutions; Polish Standard PN-EN 1176 Playground equipment and surfacing. Does fencing playgrounds really reduce contamination of sand? To verify this hypothesis, the studies have been conducted on the residential areas’ sandpits, both fence secured and unsecured, located in close proximity to one another. The aim of the study was to evaluate the effectiveness of fences and nets as protection from microbial and parasite contamination of sandpits, mainly due to the access of animals to them. For several seasons of spring and summer the sand was examined in terms of the total number of heterotrophic bacteria and fungi (organic matter contamination of sand indicators and for the presence of coliform bacteria (including Escherichia coli, bacteria of the Salmonella genus and the eggs of intestinal parasites. It can be concluded that fencing playgrounds affects sand pollution less with waste and plant material (as a consequence, it has been reported statistically significantly less heterotrophic bacteria and fungi in the fenced sandpits’ sand. Unfortunately, the fence does not eliminate the risks associated with sand pollution of coliform bacteria. Cats and birds, but also dogs, still have a continuous access to sand. Due to the repeatedly stated carelessness of children and their caregivers, gates left open to the playground do not constitute an obstacle for domestic and stray animals. Another source of sand pollution with intestinal pathogens can be a manner of carriage of new sand, as there is no legislation governing the issue of transport

  1. METHOD OF PROCESSING MONAZITE SAND

    Science.gov (United States)

    Welt, M.A.; Smutz, M.

    1958-08-26

    A process is described for recovering thorium, uranium, and rare earth values from monazite sand. The monazite sand is first digested with sulfuric acid and the resulting "monazite sulfate" solution is adjusted to a pH of between 0.4 and 3.0, and oxalate anions are added causing precipitation of the thorium and the rare earths as the oxalates. The oxalate precipitate is separated from the uranium containing supernatant solution, and is dried and calcined to the oxides. The thorium and rare earth oxides are then dissolved in nitric acid and the solution is contacted with tribntyl phosphate whereby an organic extract phase containing the cerium and thorium values is obtained, together with an aqueous raffinate containing the other rare earth values. The organic phase is then separated from the aqueous raffinate and the cerium and thorium are back extracted with an aqueous medium.

  2. Traceability of Height Measurements on Green Sand Molds using Optical 3D Scanning

    DEFF Research Database (Denmark)

    Mohaghegh, Kamran; Yazdanbakhsh, S.A.; Tiedje, N. S.

    2016-01-01

    (CMM) which is traceable to the meter unit. Optical scanners are increasingly used for dimensional metrology without the risk of damaging the surface, but lack of international standards makes it difficult to establish traceability of their measurements and compare them to tactile instruments....... This paper presents a metrological approach for height measurement on green sand molds using an optical 3D scanner with fringe projection. A new sand sample was developed with a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to green sand...

  3. Characterization of sand lenses embedded in tills

    DEFF Research Database (Denmark)

    Kessler, Timo Christian; Klint, K.E.S.; Nilsson, B.

    2012-01-01

    of the various types of sand lenses is discussed, primarily in relation to the depositional and glaciotectonic processes they underwent. Detailed characterization of sand lenses facilitates such interpretations. Finally, the observations are linked to a more general overview of the distribution of sand lenses......Tills dominate large parts of the superficial sediments on the Northern hemisphere. These glacial diamictons are extremely heterogeneous and riddled with fractures and lenses of sand or gravel. The frequency and geometry of sand lenses within tills are strongly linked to glaciodynamic processes...... occurring in various glacial environments. This study specifically focuses on the appearance and spatial distribution of sand lenses in tills. It introduces a methodology on how to measure and characterize sand lenses in the field with regard to size, shape and degree of deformation. A set of geometric...

  4. A compact topology for sand automata

    CERN Document Server

    Dennunzio, Alberto; Masson, Benoît

    2008-01-01

    In this paper, we exhibit a strong relation between the sand automata configuration space and the cellular automata configuration space. This relation induces a compact topology for sand automata, and a new context in which sand automata are homeomorphic to cellular automata acting on a specific subshift. We show that the existing topological results for sand automata, including the Hedlund-like representation theorem, still hold. In this context, we give a characterization of the cellular automata which are sand automata, and study some dynamical behaviors such as equicontinuity. Furthermore, we deal with the nilpotency. We show that the classical definition is not meaningful for sand automata. Then, we introduce a suitable new notion of nilpotency for sand automata. Finally, we prove that this simple dynamical behavior is undecidable.

  5. Rheological Characterization of Green Sand Flow

    DEFF Research Database (Denmark)

    Jabbaribehnam, Mirmasoud; Spangenberg, Jon; Hovad, Emil

    2016-01-01

    The main aim of this paper is to characterize experimentally the flow behaviour of the green sand that is used for casting of sand moulds. After the sand casting process is performed, the sand moulds are used for metal castings. The rheological properties of the green sand is important to quantify...... module for characterizing granular materials. The new module enables viscosity measurements of the green sand as function of the shear rate at different flow rates, i.e. 0, 2, 4, 6, 8, 10, 12 and 15 L/min. The results show generally that the viscosity decreases with both the shear- and flow rate....... In addition, the measurements show that the green sand flow follows a shear-thinning behaviour even after the full fluidization point....

  6. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...... as well as the flow pattern during discharge of the silo. During discharge a mixed flow pattern has been identified...

  7. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17.

  8. Formation of Craters in Sand

    Directory of Open Access Journals (Sweden)

    Vanissra Boonyaleepun

    2007-06-01

    Full Text Available The diameter of craters formed by spheres of varying mass dropped into sand at low speed was studied. The relationship between the diameter of the crater formed and the kinetic energy of the projectile at impact was found to be of the same general form as that for planetary meteor craters. The relationship is shown to be a power law with exponent 0.17

  9. Thermal Properties of oil sand

    Science.gov (United States)

    LEE, Y.; Lee, H.; Kwon, Y.; Kim, J.

    2013-12-01

    Thermal recovery methods such as Cyclic Steam Injection or Steam Assisted Gravity Drainage (SAGD) are the effective methods for producing heavy oil or bitumen. In any thermal recovery methods, thermal properties (e.g., thermal conductivity, thermal diffusivity, and volumetric heat capacity) are closely related to the formation and expansion of steam chamber within a reservoir, which is key factors to control efficiency of thermal recovery. However, thermal properties of heavy oil or bitumen have not been well-studied despite their importance in thermal recovery methods. We measured thermal conductivity, thermal diffusivity, and volumetric heat capacity of 43 oil sand samples from Athabasca, Canada, using a transient thermal property measurement instrument. Thermal conductivity of 43 oil sand samples varies from 0.74 W/mK to 1.57 W/mK with the mean thermal conductivity of 1.09 W/mK. The mean thermal diffusivity is 5.7×10-7 m2/s with the minimum value of 4.2×10-7 m2/s and the maximum value of 8.0×10-7 m2/s. Volumetric heat capacity varies from 1.5×106 J/m3K to 2.11×106 J/m3K with the mean volumetric heat capacity of 1.91×106 J/m3K. In addition, physical and chemical properties (e.g., bitumen content, electric resistivity, porosity, gamma ray and so on) of oil sand samples have been measured by geophysical logging and in the laboratory. We are now proceeding to investigate the relationship between thermal properties and physical/chemical properties of oil sand.

  10. 挤密砂桩集成控制系统优化方案的关键技术%Key technology for improving project of sand pile integration control system

    Institute of Scientific and Technical Information of China (English)

    李靖; 马振江

    2014-01-01

    基于砂桩控制系统硬件和程序生成的数据格式,通过研究Access数据库、具有EIA RS-232接口的PLC控制系统、具有TXT数据文件格式的GPS系统和具有TCP/IP通信协议的集中管理系统之间的通信方式,解决不同控制系统之间的互通问题,满足高效开发稳定集成控制系统要求。%Based on the hardware of the sand pile integration control system and data format made by the control program, we successfully developed the pattern of data exchange in the Access Database , PLC control system with the EIA RS-232 protocol, GPS System with the TXT data format and the computer system with the TCP/IP protocol for solving data exchange in control systems with different communication protocols, which can contribute to developing efficiently the stable integration control system.

  11. A Canadian perspective on the supply costs, production and economic impacts from oil sands development

    Energy Technology Data Exchange (ETDEWEB)

    McColl, D.; Masri, M. [Canadian Energy Research Inst., Calgary, AB (Canada)

    2008-05-15

    This article provided a synopsis of oil sands research recently conducted at the Canadian Energy Research Institute (CERI). The production profiles and capital expenditures that CERI has projected for oil sands projects were explored along with the macroeconomic benefits associated with oil sands development. In addition to rising capital and operating costs, bitumen producers are challenged by labour shortages and environmental concerns. However, CERI warrants continued growth in production from the oil sands industry, given the current high price state of the global oil market and security of supply concerns from oil importing countries. This article also provided background information and analysis to assess the implications of future development. The projected growth in the oil sands industry creates demands for infrastructure, housing, health care, education, and business services. The economic impacts were measured at the local, provincial, national and global levels in terms of changes in gross domestic product; changes in employment; and, changes in government revenues. It was concluded that with continued investment and development, Alberta's oil sands resource is expected to continue to produce oil for decades, and would eventually achieve 6 MMbpd production. 8 refs., 3 tabs., 10 figs.

  12. Evaluation of Durability Parameters of Concrete with Manufacture Sand and River Sand

    Science.gov (United States)

    Sangoju, Bhaskar; Ramesh, G.; Bharatkumar, B. H.; Ramanjaneyulu, K.

    2017-06-01

    Most of the states in our country have banned sand quarrying from the river beds, causing a scarcity of natural river sand for the construction sector. Manufacture sand (M-sand) is one of the alternate solutions to replace the river sand (R-sand) in concrete. The main aim of the present study is to evaluate the durability parameters of concrete with M-sand when compared to that of concrete with R-sand. Corrosion of reinforcement is one of the main deteriorating mechanisms of reinforced concrete due to the ingress of chloride ions or carbon-di-oxide. For comparative evaluation of durability parameters, accelerated tests such as Rapid Chloride Permeability Test, Rapid Chloride Migration Test and accelerated carbonation test were carried out on specimens of R-sand and M-sand. All tests were carried out after 90 days of casting. Test results reveal that the durability parameters of the concrete with M-sand in chloride induced environment is relatively better than that of concrete with R-sand and hence is recommended to use M-sand as a replacement to R-sand.

  13. Sand deposit-detecting method and its application in model test of sand flow

    Institute of Scientific and Technical Information of China (English)

    黎伟; 房营光; 莫海鸿; 谷任国; 陈俊生

    2013-01-01

    Against the background of the sand-flow foundation treatment engineering of Guangzhou Zhoutouzui variable cross-section immersed tunnel, a kind of sand deposit-detecting method was devised on the basis of full-scale model test of sand-flow method. The real-time data of sand-deposit height and radius were obtained by the self-developed sand-deposit detectors. The test results show that the detecting method is simple and has high precision. In the use of sand-flow method, the sand-carrying capability of fluid is limited, and sand particles are all transported to the sand-deposit periphery through crater, gap and chutes after the sand deposit formed. The diffusion range of the particles outside the sand-deposit does not exceed 2.0 m. Severe sorting of sand particles is not observed because of the unique oblique-layered depositing process. The temporal and spatial distributions of gap and chutes directly affect the sand-deposit expansion, and the expansion trend of the average sand-deposit radius accords with quadratic time-history curve.

  14. Reuse of waste foundry sand through interaction with sodium silicate binder; Reutilizacao da areia descartada da fundicao, a partir da sua interacao com agente ligante silicato de sodio

    Energy Technology Data Exchange (ETDEWEB)

    Souza, J.C.; Chinelatto, A.S.A.; Chinelatto, A.L., E-mail: josi3souza@gmail.com [Universidade Estadual de Ponta Grossa (UEPG), PR (Brazil); Oliveira, I.L. [Universidade Tecnologica Federal do Parana (UTFPR), Ponta Grossa, PR (Brazil)

    2012-07-01

    Green sand molds are used in metal casting process. However, after heating, activated bentonite present in green sand lose the binding properties, and part of the foundry sand has to be discarded from the process. The ABNT NBR 15.984/2011 establishes the management of waste foundry sand (WFS) avoiding disposal in landfills. The objective of this work was to investigate the possibility of reusing the WFS from the study of their interaction with sodium silicate binder. Studies with silica sand and new green sand was performed to compare the results obtained with the WFS. The characterizations of the samples were performed by measures the compressive strength, X-ray diffraction, optical microscopy and scanning electron microscopy. The results showed that there is interaction of the sodium silicate with the WFS as well as with the silica sand and green sand. (author)

  15. SAND

    DEFF Research Database (Denmark)

    Thorsen, Grete

    Der er udført et konsolideringsforsøg med bakkesand fra Lunds grusgrav, Lund no. O. forsøget er udført i samme konsolideringsapparat, som er anvendt til måling af deformationsegenskaberne af mange forskellige danske jordarter. Forsøgsresultaterne er søgt tolket som ved forsøg med andre jordarter....

  16. Common Object Library Description

    Science.gov (United States)

    2012-08-01

    Information Modeling ( BIM ) technology to be successful, it must be consistently applied across many projects, by many teams. The National Building Information ...distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT For Building Information Modeling ( BIM ) technology to be successful, it must be... BIM standards and for future research projects. 15. SUBJECT TERMS building information modeling ( BIM ), object

  17. Evaluation of Concrete Compressive Strength by incorporating Used Foundry Sand

    Directory of Open Access Journals (Sweden)

    Khuram Rashid

    2016-07-01

    Full Text Available The main objective of this study was to evaluate the compressive strength of concrete by utilizing three types of used foundry sand; with bentonite clay, with sodium silicate & with phenolic resin as partial replacement of fine aggregates. To accomplish the research an experimental program was conducted in which ten concrete mixtures were casted, by keeping all other parameters for concrete proportioning as constant and only change made was in the amount of fine aggregates. Ten, Twenty and Thirty percent replacement level of river sand by used foundry sands was maintained in this study. All fine aggregates were selected after achieving desired physical and chemical tests. Work ability, compressive strength and modulus of elasticity were measured and compared with the conventional concrete termed as control mixture. It was observed that work ability increased with replacement levels. The cubes were crushed at 7, 28 and 63 days of standard moist curing. The compressive strength of all concrete specimens increased with increase in curing age. With exception to foundry sand with phenolic resin, compressive strength of concrete mixtures was decreased with increase in replacement level at all ages. Similar trends were observed in modulus of elasticity of concrete.

  18. Liquefaction of Sand under Low Confining Pressure

    Institute of Scientific and Technical Information of China (English)

    YANG Shaoli; Rolf Sandven; Lars Grande

    2003-01-01

    Undrained behaviour of sand under low cell pressure was studied in static and cyclic triaxial tests. It was found that very loose sand liquefies under static loading with the relative density being a key parameter for the undrained behaviour of sand. In cyclic triaxial tests, pore water pressures built up during the cyclic loading and exceeded the confining cell pressure. This process was accompanied by a large sudden increase in axial deformation. The necessary number of cycles to obtain liquefaction was related to the confining cell pressure, the amplitude of cyclic loading and the relative density of sand.In addition, the patterns of pore water pressure response are different from those of sand samples with different relative densities. The test results are very useful for expounding scour mechanism around coastal structures since they relate to the low stress behaviour of the sand.

  19. Creep Behavior of Frozen Sand.

    Science.gov (United States)

    1981-06-01

    temperature and stress range. There was a 2strong stress dependance to S (r =0.95) for saturated Manchester Fine Sand which does not agree with RPT. The...Curves at High Stress 161 Ratio D/Du = 0.505 for Frozen HF’S at w=10% IV-20 Minimum Strain Rate Dependance on Stress 162 Ratio for Frozen MFS IV-21 Minimum...Strain Rate Dependance on Relative 163 Density for Frozen MFS IV-22 Temperature Stage Test on Frozen Saturated 164 MFS under a Load of D=9.24MPa Fig

  20. Connecting Brabant's cover sand landscapes through landscape history

    Science.gov (United States)

    Heskes, Erik; van den Ancker, Hanneke; Jungerius, Pieter Dirk; Harthoorn, Jaap; Maes, Bert; Leenders, Karel; de Jongh, Piet; Kluiving, Sjoerd; van den Oetelaar, Ger

    2015-04-01

    Noord-Brabant has the largest variety of cover sand landscapes in The Netherlands, and probably in Western Europe. During the Last Ice Age the area was not covered by land ice and a polar desert developed in which sand dunes buried the existing river landscapes. Some of these polar dune landscapes experienced a geomorphological and soil development that remained virtually untouched up to the present day, such as the low parabolic dunes of the Strabrechtse Heide or the later and higher dunes of the Oisterwijkse Vennen. As Noord-Brabant lies on the fringe of a tectonic basin, the thickness of cover sand deposits in the Centrale Slenk, part of a rift through Europe, amounts up to 20 metres. Cover sand deposits along the fault lines cause the special phenomenon of 'wijst' to develop, in which the higher grounds are wetter than the boarding lower grounds. Since 4000 BC humans settled in these cover sand landscapes and made use of its small-scale variety. An example are the prehistoric finds on the flanks and the historic towns on top of the 'donken' in northwest Noord-Brabant, where the cover sand landscapes are buried by river and marine deposits and only the peaks of the dunes protrude as donken. Or the church of Handel that is built beside a 'wijst' source and a site of pilgrimage since living memory. Or the 'essen' and plaggen agriculture that developed along the stream valleys of Noord-Brabant from 1300 AD onwards, giving rise to geomorphological features as 'randwallen' and plaggen soils of more than a metre thickness. Each region of Brabant each has its own approach in attracting tourists and has not yet used this common landscape history to connect, manage and promote their territories. We propose a landscape-historical approach to develop a national or European Geopark Brabants' cover sand landscapes, in which each region focuses on a specific part of the landscape history of Brabant, that stretches from the Late Weichselian polar desert when the dune

  1. THE MICROBIOLOGICAL AND SANITARY STATE OF SAND IN THE MUNICIPAL BATHING BEACH IN SZCZECIN

    Directory of Open Access Journals (Sweden)

    Kinga Zatoń

    2015-11-01

    Full Text Available Artificial beaches, i.e. places in the public sphere, are usually intended for recreation, located at water reservoirs, rivers, and their surface is naturally occurring or applied sand. The urban bathing beach located in Szczecin by the Deep lake has sand purchased and distributed on the beach by the Municipal Services Office in Szczecin (a few hundred ton. The beach is divided into sectors, a volleyball court is in one part, in the next section catering and sanitary facilities are located, and the remaining area is a place intended for sunbathing and playing games. The aim of the experiment was to assess the effects of different ways of using the beach on changes of microbiological properties of the sand. The tests were taken from the beach sand in May 2013 (first term examinations, and in September, after several months of use (the second term of examinations. The sand was collected near catering and sanitary sector (the first object and from the area of the volleyball court (the second object, as well as the playground for children (the third object. The facilities were distanced from the shoreline of the lake by approx. 8 metres. The comparison included the number of heterotrophic bacteria, fungi and the detected presence of coliform bacteria, including Escherichia coli, bacteria of the genus Salmonella and eggs of intestinal parasites. In any of the objects, or the periods of time, eggs of intestinal parasites and bacteria of the genus Salmonella were detected. The presence of coliform bacteria including E. coli was found in the sand collected from a catering-sanitary zone, there was also the biggest number of bacteria and fungi. The number of heterotrophic bacteria and fungi was similar in samples of sand taken from the volleyball court and from the playground, in this sand there was no bacteria belonging to the E. coli species, although in several samples from the playground other bacteria belonging to the coliform genus were detected. To

  2. Effect of Shale Distribution on Hydrocarbon Sands Integrated with Anisotropic Rock Physics for AVA Modelling: A Case Study

    Science.gov (United States)

    Ali, Aamir; Zubair; Hussain, Matloob; Rehman, Khaista; Toqeer, Muhammad

    2016-08-01

    Shales can be distributed in sand through four different ways; laminated, structural, dispersed and any combination of these aforementioned styles. A careful analysis of well log data is required for the determination of shale distribution in sand affecting its reservoir quality. The objective of this study is to characterize the effect of shale distribution on reservoir quality of sands using well log data. The correlation of well data in terms of lithology has revealed four sand and three shale layers in Lower Goru Formation acting as a major reservoir in the study area. Our results indicate that the laminated type of shale distribution prevails at the Basal sand level, which does not affect its reservoir quality greatly. The remaining layers of variable vertical extent show a variety of shale distribution models affecting their reservoir quality adversely. We also present anisotropic rock physics modelling for AVA analysis at Basal sand level.

  3. Oil sands water withdrawal challenges and the Athabasca River

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.; Baker, M. [Shell Canada Ltd., Calgary, AB (Canada). Calgary Research Centre

    2003-07-01

    Drought conditions in Alberta have raised concerns regarding water withdrawal from the Athabasca River for oil sands development projects in the Regional Municipality of Wood Buffalo in Northeastern Alberta. In particular, concerns have been raised about the potential increased rates of water withdrawal during seasonal low flow periods. A committee has been established under the Cumulative Environmental Management Association (CEMA) to develop a management system for the Athabasca River. The committee includes stakeholders from federal and provincial governments, First Nations, non-government groups and industry. This paper describes the challenges facing oil sands developers in the region with particular emphasis on the role that the newly developed management system called 'Instream Flow Needs', will have on the cumulative water withdrawal from the Athabasca River. tabs., figs.

  4. Recent advances in waterglass sand technologies

    Institute of Scientific and Technical Information of China (English)

    ZHU Chun-xi

    2007-01-01

    This paper reports some new understandings and advances in waterglass sand technologies. The multiple chemical modification process can increase the binding strength of the waterglass sand by up to 50%-70%.Therefore, the additions of the modified waterglass can be decreased to 3.0%-4.0% for CO2 process and to 2.0%-2.5% for organic ester hardening process, and greatly improve the collapsibility and reclaimability of the sand. Based on the new understandings and experimental results reported in this paper, several original ideas, such as nano modification, have been proposed to promote advances of waterglass sand technologies,

  5. PROSPECTS FIXATION DRIFT SANDS PHYSICOCHEMICAL METHOD

    Directory of Open Access Journals (Sweden)

    Maujuda MUZAFFAROVA

    2016-09-01

    Full Text Available This article is based on the theoretical foundations of secure mobile sand being considered for reducing the negative impact of one of the manifestations of exogenous plains on such an important natural-technical system as a railroad. It suggests practical measures to build a system of design protection against sand drifts. The article also suggests ways to conserve resources and rational use of machinery and performers as well as the consolidation of mobile sand wet with water soluble waste of local production of waste dextrin. Consolidation is exposed on dry and wet sand.

  6. Innovative developments in sand reclamation technologies

    Directory of Open Access Journals (Sweden)

    R. Dañko

    2011-04-01

    Full Text Available Proper sand management and efficient sand reclamation system are two main factors influencing economical and ecological side of modern foundry plant. It is well known fact that the production of 1 metric ton of casting from ferrous alloys generates circa 1 metric ton of waste [1], which due to containing certain amounts of harmful and dangerous compounds should undergo a reclamation – at least of the main component, which means a silica sand grains. The paper present problems of scientific and development research concerning the innovative reclamation technologies of used foundry sands such as: mechanical-cryogenic reclamation and innovative thermal reclamation.

  7. PREFACE: WMO/GEO Expert Meeting On An International Sand And Dust Storm Warning System

    Science.gov (United States)

    Pérez, C.; Baldasano, J. M.

    2009-03-01

    developing applications focusing on societal benefit and risk reduction. However, at present there are interdisciplinary research challenges to overwhelm current uncertainties in order to reach full potential. Furthermore, the community of practice for SDS observations, forecasts and analyses is mainly scientifically based and rather disconnected from potential users. This requires the development of interfaces with operational communities at international and national levels, strongly focusing on the needs of people and factors at risk. The WMO has taken the lead with international partners to develop and implement a Sand and Dust Storm Warning Advisory and Assessment System (SDS-WAS). The history of the WMO SDS-WAS development is as follows. On 12-14 September 2004, an International Symposium on Sand and Dust Storms was held in Beijing at the China Meteorological Agency followed by a WMO Experts Workshop on Sand and Dust Storms. The recommendations of that workshop led to a proposal to create a WMO Sand and Dust Storm Project coordinated jointly with the Global Atmosphere Watch (GAW). This was approved by the steering body of the World Weather Research Programme (WWRP) in 2005. Responding to a WMO survey conducted in 2005, more than forty WMO Member countries expressed interest in participating in activities to improve capacities for more reliable sand and dust storm monitoring, forecasting and assessment. On 31 October to 1 November 2006 in Shanghai, the steering committee of the Sand and Dust Storm Project proposed the development and implementation of a Sand and Dust Storm Warning, Advisory and Assessment System (SDS-WAS). The WMO Secretariat in Geneva formed an ad-hoc Internal Group on SDS-WAS consisting of scientific officers representing WMO research, observations, operational prediction, service delivery and applications programmes such as aviation and agriculture. In May 2007, the 14th WMO Congress endorsed the launching of the SDS-WAS. It also welcomed the strong

  8. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    OpenAIRE

    Sunday Isehunwa,; Andrew Farotade

    2010-01-01

    Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field ...

  9. Bedload transport of sand-gravel mixtures with antidunes: flume experiments

    OpenAIRE

    Núñez González, Francisco

    2012-01-01

    In this thesis, the interaction between flow and sediment in alluvial channels is studied from an empirical approach, for conditions close or pertaining to supercritical flow, and for four types of sediment: sand, gravel and two mixtures with sand and gravel in a relative proportion of 70-30 and 55-45, respectively. The objective is to obtain by means of laboratory experiments a data set with the characteristics of flow, sediment transport, bed configurations and sediment sorting patterns in ...

  10. Understanding the object of design through project drawin: an archive of drawings by Portuguese designers from the 20th and 21st centuries

    OpenAIRE

    2009-01-01

    In this paper, we discuss the usefulness of creating an archive of the design project drawings. It will be the creation of a digital archive of drawings made by Portuguese designers in the XX and XXI century. The project drawings are normally intended to be lost, by their ephemeral and transitory nature, even if they participate clearly in the projectual understanding, namely both of the process and of the proposed answer/solution. In this case, the digital images’ recording of the designe...

  11. Bacteria of Phlebotominae Sand Flies Collected in Western Iran

    Directory of Open Access Journals (Sweden)

    Somayeh Rafatbakhsh-Iran

    2015-08-01

    Full Text Available Microorganisms particularly bacteria presenting in insects such as Phlebotominae may play an important role in the epidemiology of human infectious disease. Nowadays, because of vector implications, the routine methods of controlling and spraying have no more beneficial effects on vectors and reservoirs. Little knows about the prevalence and diversity of sand fly bacteria. The main objective of this study was to determine the presence of bacteria of phlebotominae sand flies collected in Hamadan, west of Iran. This information is important in order to development of vector control strategies. The microbial flora of Phlebotomus papatasi and P. sergenti the main vector of Cutaneous Leishmaniasis in the old world, were investigated. We characterized 8 bacteria, including 5 Gram-negative bacteria: Acinetobacter lwoffii, Pseudomonas aeruginosa, Enterobacter cloacae, Edvardsiela sp. and Proteus mirabilis and Gram-positive bacteria: Bacillus subtilis, Staphylococcus saprophyticus and Micrococcus luteus. Our study provides some data on the microbiota diversity of field-collected sand flies for the first time in Hamadan. Our results indicate that there is a range of variation of aerobic bacteria inhabiting sand fly, which possibly reflect the ecological condition of the habitat where the fly breeds. Microbiota is increasingly regarded as an important factor for modulating vector competence in insect vectors. So, mirobiota can be effects on the biology of phlebotominae and their roles in the sandfly-Leishmania interaction. Further experiments are required to clearly delineate the vectorial role of sand flies. Because it is probable that in the future, factors such as environmental changes, migration and urbanization can ease the transmission of leishmaniasis in this area.

  12. Sediment Analysis Network for Decision Support (SANDS)

    Science.gov (United States)

    Hardin, D. M.; Keiser, K.; Graves, S. J.; Conover, H.; Ebersole, S.

    2009-12-01

    Since the year 2000, Eastern Louisiana, coastal Mississippi, Alabama, and the western Florida panhandle have been affected by 28 tropical storms, seven of which were hurricanes. These tropical cyclones have significantly altered normal coastal processes and characteristics in the Gulf region through sediment disturbance. Although tides, seasonality, and agricultural development influence suspended sediment and sediment deposition over periods of time, tropical storm activity has the capability of moving the largest sediment loads in the shortest periods of time for coastal areas. The importance of sediments upon water quality, coastal erosion, habitats and nutrients has made their study and monitoring vital to decision makers in the region. Currently agencies such as United States Army Corps of Engineers (USACE), NASA, and Geological Survey of Alabama (GSA) are employing a variety of in-situ and airborne based measurements to assess and monitor sediment loading and deposition. These methods provide highly accurate information but are limited in geographic range, are not continuous over a region and, in the case of airborne LIDAR are expensive and do not recur on a regular basis. Multi-temporal and multi-spectral satellite imagery that shows tropical-storm-induced suspended sediment and storm-surge sediment deposits can provide decision makers with immediate and long-term information about the impacts of tropical storms and hurricanes. It can also be valuable for those conducting research and for projects related to coastal issues such as recovery, planning, management, and mitigation. The recently awarded Sediment Analysis Network for Decision Support will generate decision support products using NASA satellite observations from MODIS, Landsat and SeaWiFS instruments to support resource management, planning, and decision making activities in the Gulf of Mexico. Specifically, SANDS will generate decision support products that address the impacts of tropical storms

  13. 蒙特卡洛模拟的网络图项目多目标可靠性研究%Study of project multi-objective reliability in network diagram based on Monte Carlo simulation

    Institute of Scientific and Technical Information of China (English)

    李涛; 仇文革; 周东伟; 王立川

    2014-01-01

    Activity time, activity cost, activity quality are selected as basic variables, a project reliable and optimized model of multi-objective(project duration, project cost, project quality)in network diagram is established by Monte Carlo simu-lation and network disjointed method. From the perspective of mathematical statistics, project duration reliability, project cost reliability and project quality reliability, project construction reliability are calculated, and activity’s influence degree is defined, indicating the direction to optimize the target reliability. The feasibility and practicability of the reliable model has been proved by empirical research of one project, providing a powerful tool for assessing network diagram project.%选取工序工时、工序成本、工序质量作为基本变量,利用蒙特卡洛模拟和网络不交化方法构建了一种网络图项目多目标(工期、成本、质量)可靠性优化模型。从数理统计的角度,计算工期可靠性、成本可靠性、质量可靠性、项目施工可靠性及定义工序影响度,对优化其目标可靠性指明方向。通过对某工程项目进行实证研究,验证了该可靠性模型的可行性与实用性,为评价网络图项目提供了一种有力的工具。

  14. Study of Black Sand Particles from Sand Dunes in Badr, Saudi Arabia Using Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Haider Abbas Khwaja

    2015-08-01

    Full Text Available Particulate air pollution is a health concern. This study determines the microscopic make-up of different varieties of sand particles collected at a sand dune site in Badr, Saudi Arabia in 2012. Three categories of sand were studied: black sand, white sand, and volcanic sand. The study used multiple high resolution electron microscopies to study the morphologies, emission source types, size, and elemental composition of the particles, and to evaluate the presence of surface “coatings or contaminants” deposited or transported by the black sand particles. White sand was comprised of natural coarse particles linked to wind-blown releases from crustal surfaces, weathering of igneous/metamorphic rock sources, and volcanic activities. Black sand particles exhibited different morphologies and microstructures (surface roughness compared with the white sand and volcanic sand. Morphological Scanning Electron Microscopy (SEM and Laser Scanning Microscopy (LSM analyses revealed that the black sand contained fine and ultrafine particles (50 to 500 nm ranges and was strongly magnetic, indicating the mineral magnetite or elemental iron. Aqueous extracts of black sands were acidic (pH = 5.0. Fe, C, O, Ti, Si, V, and S dominated the composition of black sand. Results suggest that carbon and other contaminant fine particles were produced by fossil-fuel combustion and industrial emissions in heavily industrialized areas of Haifa and Yanbu, and transported as cloud condensation nuclei to Douf Mountain. The suite of techniques used in this study has yielded an in-depth characterization of sand particles. Such information will be needed in future environmental, toxicological, epidemiological, and source apportionment studies.

  15. Pattern formation - Instabilities in sand ripples

    DEFF Research Database (Denmark)

    Hansen, J. L.; v. Hecke, M.; Haaning, A.

    2001-01-01

    Sand ripples are seen below shallow wavy water and are formed whenever water oscillates over a bed of sand. Here we analyse the instabilities that can upset this perfect patterning when the ripples are subjected to large changes in driving amplitude or frequency, causing them to deform both...

  16. Silica sand resources in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Westerhoff, W.E.; Menkovic, A.; Gruijters, S.H.L.L.; Dubelaar, C.W.; Maljers, D.

    2009-01-01

    Silica sand, (almost) pure quartz sand, is a valuable and scarce mineral resource within the shallow Dutch subsurface. High-grade deposits are exploited in the southeastemmost part of the country, as raw material for the glass, ceramic, chemical and other process industries. Dutch land-use policy re

  17. Understanding Colombian Amazonian white sand forests

    NARCIS (Netherlands)

    Peñuela-Mora, M.C.

    2014-01-01

    Although progress has been made in studies on white sand forests in the Amazon, there is still a considerable gap in our knowledge of the unique species composition of white sand forests and their structure and dynamics, especially in Western Amazon. This thesis aims to fill this gap by addressing t

  18. Sand transportation and reverse patterns over leeward face of sand dune

    Science.gov (United States)

    Jiang, Hong; Dun, Hongchao; Tong, Ding; Huang, Ning

    2017-04-01

    Sand saltation has complex interactions with turbulent flow and dune form. Most models of wind-blown sand consider ideal circumstances such as steady wind velocity and a flat surface, and the bulk of data on wind flow and sand transport over an individual dune has focused mostly on the influence of dune shape or inter-dune space on the wind flow, neglecting the effect of morphology on sand saltation, particularly airflow and sand transportation over the leeward slope. Wind flow structures over the leeward slope of sand dunes have a fundamental influence on the organization of sand dunes. In order to understand sand dune dynamics, lee face airflow and sediment transportation should be paid more attention. Previous field observations could not measure turbulent flow structure well because of the limited observation points and the influence of experiment structure on wind field. In addition, the reverse sand particles over leeward face could not be collected by sand trap in field. Numerous field observations could not measure turbulent flow structure because of the limited observation points and the influence of experimental structures on the wind field. In addition, the reverse transport of sand particles over leeward face could not be collected by sand traps in field. Therefore, this paper aims to investigate the turbulent flow structure and sand transport pattern over the leeward slope. A numerical model of sand saltation over slope terrain is constructed, which also considers the coupling effects between air flow and sand particles. The large eddy simulation method is used to model turbulent flow. Sand transport is simulated by tracking the trajectory of each sand particle. The results show that terrain significantly alters the turbulent air flow structure and wind-blown sand movement, especially over the leeward slope. Here, mass flux increases initially and then decreases with height in the reversed flow region in the direction of wind flow, and the mass flux

  19. Project Multi-objective Scheduling Optimization Based on Set Pair Analysis and NSGA-II%基于集对分析与 NSGA -II 的工程项目多目标优化

    Institute of Scientific and Technical Information of China (English)

    翟瑞; 张云宁; 陈国伟; 赵迎亮

    2015-01-01

    工程项目进度、成本和质量三者是对立统一的,工程项目的多目标优化着重于求解三者的和谐统一。以工程项目施工过程中的进度、成本和质量水平阈值为约束条件,运用集对分析法为建筑工程多目标优化问题的处理构建了柔性的建模框架;利用NSGA-II算法求解多目标优化模型,得到多目标优化的Pareto最优解集;通过实际算例验证了该算法在解决工程项目多目标优化问题中的可行性和有效性。%The three main objectives of the project are schedule , cost, and quality, which are the unity of opposites .The op-timization of the multi-objectives of the project focuses on seeking the harmony of the three of them .Constrained by the thresh-old level of the project schedule , cost and quality , a flexible modeling framework was constructed for the construction of multi -objective optimization problem by set pair analysis method .Then NSGA-II algorithm was used to solve the model of multi objec-tive optimization in order to get multi -objective optimization of Pareto optimal solution set .Finally, a practical example was giv-en to verify the feasibility and effectiveness of the algorithm in solving multi -objective optimization project problems .

  20. Assessing the required additional organic inputs to soils to reach the 4 per 1000 objective at the global scale: a RothC project

    Science.gov (United States)

    Lutfalla, Suzanne; Skalsky, Rastislav; Martin, Manuel; Balkovic, Juraj; Havlik, Petr; Soussana, Jean-François

    2017-04-01

    The 4 per 1000 Initiative underlines the role of soil organic matter in addressing the three-fold challenge of food security, adaptation of the land sector to climate change, and mitigation of human-induced GHG emissions. It sets an ambitious global target of a 0.4% (4/1000) annual increase in top soil organic carbon (SOC) stock. The present collaborative project between the 4 per 1000 research program, INRA and IIASA aims at providing a first global assessment of the translation of this soil organic carbon sequestration target into the equivalent organic matter inputs target. Indeed, soil organic carbon builds up in the soil through different processes leading to an increased input of carbon to the system (by increasing returns to the soil for instance) or a decreased output of carbon from the system (mainly by biodegradation and mineralization processes). Here we answer the question of how much extra organic matter must be added to agricultural soils every year (in otherwise unchanged climatic conditions) in order to guarantee a 0.4% yearly increase of total soil organic carbon stocks (40cm soil depth is considered). We use the RothC model of soil organic matter turnover on a spatial grid over 10 years to model two situations for croplands: a first situation where soil organic carbon remains constant (system at equilibrium) and a second situation where soil organic matter increases by 0.4% every year. The model accounts for the effects of soil type, temperature, moisture content and plant cover on the turnover process, it is run on a monthly time step, and it can simulate the needed organic input to sustain a certain SOC stock (or evolution of SOC stock). These two SOC conditions lead to two average yearly plant inputs over 10 years. The difference between the two simulated inputs represent the additional yearly input needed to reach the 4 per 1000 objective (input_eq for inputs needed for SOC to remain constant; input_4/1000 for inputs needed for SOC to reach

  1. Object crowding.

    Science.gov (United States)

    Wallace, Julian M; Tjan, Bosco S

    2011-05-25

    Crowding occurs when stimuli in the peripheral fields become harder to identify when flanked by other items. This phenomenon has been demonstrated extensively with simple patterns (e.g., Gabors and letters). Here, we characterize crowding for everyday objects. We presented three-item arrays of objects and letters, arranged radially and tangentially in the lower visual field. Observers identified the central target, and we measured contrast energy thresholds as a function of target-to-flanker spacing. Object crowding was similar to letter crowding in spatial extent but was much weaker. The average elevation in threshold contrast energy was in the order of 1 log unit for objects as compared to 2 log units for letters and silhouette objects. Furthermore, we examined whether the exterior and interior features of an object are differentially affected by crowding. We used a circular aperture to present or exclude the object interior. Critical spacings for these aperture and "donut" objects were similar to those of intact objects. Taken together, these findings suggest that crowding between letters and objects are essentially due to the same mechanism, which affects equally the interior and exterior features of an object. However, for objects defined with varying shades of gray, it is much easier to overcome crowding by increasing contrast.

  2. Performance Objectives

    Science.gov (United States)

    1978-12-01

    objectives may direct students’ learning (Duchastel and Merrill, 1973; Kapfer , 1970; Kibler et al., 1974), since such objectives may provide...matter learning. Journal of Educational Psychology, 62(1): 67-70 (1971). Kapfer , P. G. Behavioral objectives and the curriculum processor. Educational

  3. Altitude of the top of the Sparta Sand and Memphis Sand in three areas of Arkansas

    Science.gov (United States)

    Pugh, Aaron L.; Westerfield, Paul W.; Gonthier, Gerard; Poynter, David T.

    1998-01-01

    The Sparta Sand and Memphis Sand form the second most productive aquifer in Arkansas. The Sparta Sand and Memphis Sand range in thick- ness from 0 to 900 feet, consisting of fine- to medium-grained sands interbedded with layers of silt, clay, shale, and minor amounts of lignite. Within the three areas of interest, the top surface of the Sparta Sand and Memphis Sand dips regionally east and southeast towards the axis of the Mississippi Embayment syncline and Desha Basin. Local variations in the top surface may be attributed to a combination of continued development of structural features, differential compaction, localized faulting, and erosion of the surface prior to subsequent inundation and deposition of younger sediments.

  4. Sand Failure Mechanism and Sanding Parameters in Niger Delta Oil Reservoirs

    Directory of Open Access Journals (Sweden)

    Sunday Isehunwa,

    2010-05-01

    Full Text Available Sand production is a major issue during oil and gas production from unconsolidated reservoirs. In predicting the onset of sand production, it is important to accurately determine the failure mechanism and the contributing parameters. The aim of this study was to determine sand failure mechanism in the Niger-Delta, identify themajor contributing parameters and evaluate their effects on sanding.Completion and production data from 78 strings completed on 22 reservoirs in a Niger Delta oil Field were evaluated. Sand failure mechanisms and contributing parameters were identified and compared with published profiles. The results showed that cohesive stress is the predominant sand failure mechanism. Water cut, bean size and gas oil ratio (GOR impact sand production in the Niger Delta.

  5. Learning Design at White Sands Test Facility

    Science.gov (United States)

    Grotewiel, Shane

    2010-01-01

    During the Fall of 2010, I spent my time at NASA White Sands Test Facility in Las Cruces, NM as an Undergraduate Student Research Program (USRP) Intern. During that time, I was given three projects to work on: Large Altitude Simulation System (LASS) basket strainer, log books, and the design of a case for touch screen monitors used for simulations. I spent most of my time on the LASS basket strainer. The LASS system has a water feed line with a basket strainer that filters out rust. In 2009, there were three misfires which cost approximately $27,000 and about 8% of the allotted time. The strainer was getting a large change in pressure that would result in a shutdown of the system. I have designed a new basket that will eliminate the large pressure change and it can be used with the old basket strainer housing. The LASS system has three steam generators (modules). Documents pertaining to these modules are stored electronically, and the majority of the documents are not able to be searched with keywords, so they have to be gone through one by one. I have come up with an idea on how to organize these files so that the Propulsion Department may efficiently search through the documents needed. Propulsion also has a LASS simulator that incorporates two touch screen monitors. Currently these monitors are in six foot by two foot metal cabinet on wheels. During simulation these monitors are used in the block house and need to be taken out of the block house when not in use. I have designed different options for hand held cases for storing and transporting the monitors in and out of the block house. The three projects previously mentioned demonstrate my contributions to the Propulsion Department and have taught me real world experience that is essential in becoming a productive engineer.

  6. Controlling the motion of multiple objects on a Chladni plate

    National Research Council Canada - National Science Library

    Zhou, Quan; Sariola, Veikko; Latifi, Kourosh; Liimatainen, Ville

    2016-01-01

    The origin of the idea of moving objects by acoustic vibration can be traced back to 1787, when Ernst Chladni reported the first detailed studies on the aggregation of sand onto nodal lines of a vibrating plate...

  7. 政府和社会资本合作(PPP)项目多目标优化模型研究%Multi-objectives Optimization Model of Public Private Partnership Project

    Institute of Scientific and Technical Information of China (English)

    王艳伟; 黄宜; 李靖

    2016-01-01

    In the operation process of PPP projects,stakeholders try to maximize their own interests so that project financing entropy gradually increases,which makes the system from order to disorder. In order to solve this problem,it is necessary to study on PPP project system to meet the minimum entropy conditions,and try to make the stakeholders to gain more profit. This is a multi-objectives optimization problem in PPP projects. This paper constructs a multi-objectives optimization model based on the PPP project financing entropy. Using Matlab,the paper solve multi-objective optimization model of PPP project financing using genetic optimization algorithm. Finally,the results are proved by an example.%在公共基础设施项目采用政府和社会资本合作(PPP)模式过程中,各利益主体为了自身利益最大化进行相互博弈而产生的项目融资熵不断增加,使得系统从有序走向无序。为了解决这一问题,有必要研究在满足 PPP 项目整体系统熵最小的条件下,尽量使各利益相关方获得较大的收益,保证PPP项目融资系统的有序性。构建了基于熵视角的PPP项目融资多目标优化决策模型,借助Matlab工具,利用遗传优化算法对PPP项目多目标优化决策模型进行求解。通过实例验证,取得了较好的效果。

  8. Managing the environmental challenges of oil sand development

    Energy Technology Data Exchange (ETDEWEB)

    Weagle, K. [Cumulative Environmental Management Association, Fort McMurray, AB (Canada)

    2003-07-01

    A brief overview of the development of the oil sand industry in Alberta was provided with reference to proposed projects, government revenue, and jobs in the industry between 1995 and 2002. The major environmental concerns facing the industry are: corporations and environmental risk; the process required by both the federal government and the government of Alberta to address cumulative effects; and, an increased interest in resource development. Self-regulation in the sector was discussed, examining who pays the bills, and the triad of self-regulation. The author described the Cumulative Environmental Management Association (CEMA) as being a multi-shareholder group working to implement sustainable development strategies by promoting management and understanding of cumulative impacts. The 14 themes of CEMA were examined, its goals reviewed, and the corporate structure described. Other challenges facing the oil sands industry originate from the Kyoto Protocol negotiations and construction costs. The Alberta government fosters a climate that encourages continued development in Alberta's oil sands areas. figs.

  9. Decolorization of black liquor from bioethanol G2 production using iron oxide coating sands

    Science.gov (United States)

    Barlianti, Vera; Triwahyuni, Eka; Waluyo, Joko; Sari, Ajeng Arum

    2017-01-01

    Bioethanol G2 production using oil palm empty fruit bunch as raw material consists of four steps, namely pretreatment, hydrolysis, fermentation, and purification process. Pretreatment process generates black liquor that causes serious environmental pollution if it is released to the environment. The objective of this research is studying the ability of iron oxide coating sands to adsorb the color of black liquor. The iron oxide coating sands were synthesized from FeCl3.6H2O with quartz sands as support material. This research was conducted on batch mode using black liquor in various pH values. Result obtained that kind of iron oxide on quartz sands's surface was goethite. The result also indicated decreasing of color intensity of black liquor after adsorption process. This research supports local material utilization in environmental technology development to solve some environmental problems.

  10. 基于多目标粒子群的土地整理项目选址模型%Site selection model of land consolidation projects based on multi-objective optimization PSO

    Institute of Scientific and Technical Information of China (English)

    王华; 朱付保

    2015-01-01

    土地整理项目选址实质上是一个多目标空间优化问题,将传统选址方法用于解决多目标土地整理项目选址存在明显不足.该文提出了一种基于多目标粒子群的土地整理项目选址模型,归纳了土地整理项目选址的选址规则,提取 3个能够体现土地整理项目选址目的及意义的目标函数,即新增耕地潜力最高、空间分区集中连片、土地适宜性评价指数最高,同时考虑了土地整理项目最小新增耕地率、实施规模 2 类约束条件,并详细阐述了算法的核心思想、矢量编码策略、状态更新机制等内容,最后选取湖北省嘉鱼县为试验区,验证了模型的可行性和有效性,结果表明通过对目标的权重调控可以得到不同目标偏好的土地整理项目选址方案,该文所构建模型在土地整理实践中具有可操作性,提供的选址方案科学合理,为土地利用规划和土地利用调控管理提供支持.%Land consolidation, as a significant way to optimize the allocation of land resources in relatively small regions, is one of the important contents of land use plan. The only way in China to implement the work of land consolidation is project, so the site selection of land consolidation projects, demarcating the border in the two-dimensional space, is the first step of land consolidation projects. Its scientificity and rationality will decide the achievement of maximum benefit of land consolidation. But from the current actual situation of land consolidation, the theory and the practice of the site selection of land consolidation projects are both weak, so on the occasion of new round of land use planning, the research of scientific theories and methods is necessary and urgent. Site location of land consolidation project was discussed in this paper based on multi-objective optimization. The site location rules of land consolidation project were generalized, and 3 objective functions were comprised, which

  11. Opportunities in oil sands production bi-products

    Energy Technology Data Exchange (ETDEWEB)

    Gunardson, H. [Air Products Canada Ltd., Calgary, AB (Canada)

    2006-07-01

    This presentation investigated potential by-products from oil sands production and upgrading facilities, and examined the extent to which carbon dioxide (CO{sub 2}) enhanced oil recovery (EOR) projects can absorb greenhouse gas (GHG) emissions from oil sands developments. Oil sands production by-products included bitumen and petroleum coke; heat; hydrocarbon off-gases; hydrogen; syngas; sulfur; metals; and CO{sub 2} sources from combustion processes and hydrogen production. CO{sub 2} concentrations from flue gases are typically less than 17 per cent, and contain contaminants such as nitrogen, particulates, nitrogen oxide (NO{sub x}) and sulphur dioxide (SO{sub x}). CO{sub 2} concentrations derived from hydrogen production have a high purity and contain water vapour, unreacted hydrocarbons, hydrogen sulphide (H{sub 2}S) and volatile metals. Existing carbon capture technologies are currently not capable of processing large volumes of CO{sub 2}. However, small volumes of CO{sub 2} are used in the manufacturing of carbonated beverages. Larger volumes of CO{sub 2} are used in EOR and coalbed methane (CBM) recovery as well as in CO{sub 2} sequestration. Carbon capture technologies include amine scrubbers, selexol and rectisol gasification processes, and Benfield Catacarb processes. The market price for CO{sub 2} in EOR and gas recovery is approximately $35 per tonne. However, combustion processes typically cost $103 per tonne. CO{sub 2} sources and sinks were also identified. It is estimated that total CO{sub 2} sequestration using EOR will equal 200 mega tonnes by 2030. Apart from gasification processes, all CO{sub 2} sources are uneconomic using current technology. The oil sands industry is in need of a policy framework and support for infrastructure investments for CO{sub 2} pipelines and sequestration facilities. tabs., figs.

  12. Adsorption of dyes on Sahara desert sand.

    Science.gov (United States)

    Varlikli, Canan; Bekiari, Vlasoula; Kus, Mahmut; Boduroglu, Numan; Oner, Ilker; Lianos, Panagiotis; Lyberatos, Gerasimos; Icli, Siddik

    2009-10-15

    Sahara desert sand (SaDeS) was employed as a mineral sorbent for retaining organic dyes from aqueous solutions. Natural sand has demonstrated a strong affinity for organic dyes but significantly lost its adsorption capacity when it was washed with water. Therefore, characterization of both natural and water washed sand was performed by XRD, BET, SEM and FTIR techniques. It was found that water-soluble kyanite, which is detected in natural sand, is the dominant factor affecting adsorbance of cationic dyes. The sand adsorbs over 75% of cationic dyes but less than 21% for anionic ones. Among the dyes studied, Methylene Blue (MB) demonstrated the strongest affinity for Sahara desert sand (Q(e)=11.98 mg/g, for initial dye solution concentration 3.5 x 10(-5)mol/L). The effects of initial dye concentration, the amount of the adsorbent, the temperature and the pH of the solution on adsorption capacity were tested by using Methylene Blue as model dye. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of Methylene Blue on Sahara desert sand followed pseudo-second order kinetics. Gibbs free energy, enthalpy change and entropy change were calculated and found -6411 J/mol, -30360 J/mol and -76.58 J/mol K, respectively. These values indicate that the adsorption is an exothermic process and has a spontaneous nature at low temperatures.

  13. Critical state of sand matrix soils.

    Science.gov (United States)

    Marto, Aminaton; Tan, Choy Soon; Makhtar, Ahmad Mahir; Kung Leong, Tiong

    2014-01-01

    The Critical State Soil Mechanic (CSSM) is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803-0.998, 0.144-0.248, and 1.727-2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  14. Sand Flies and Their Control Methods.

    Science.gov (United States)

    Çetin, Hüseyin; Özbel, Yusuf

    2017-06-01

    The main aim of managing arthropod vectors that carry the disease agents is interrupting the infection cycle. Therefore, the management of the disease implies that all precautions related to all elements (i.e., human, arthropod vector, and reservoir) in the infection cycle need to be taken. There are important points that need to be considered while dealing with sand flies (Diptera: Psychodidae: Phlebotominae), which in many regions worldwide, particularly in tropical and subtropical areas, are vectors of diseases such as leishmaniasis and sand fly fever and are the arthropods of the infection cycle. Because the larval control of the sand flies is very difficult and almost impossible, the management is mainly conducted for the adults. The most effective strategy for reducing both sand fly fever and leishmaniasis is managing sand flies, particularly in areas where humans are located. In this review, the morphology, biology, and taxonomy of sand flies; the integrated fighting and management methods such as insecticide-impregnated bed nets and use of curtains, zooprophylaxis, indoor and outdoor residual applications, larvicides, repellents, and insecticide-impregnated dog collars; and data regarding many issues such as insecticide resistance in sand flies have been emphasized on in the review.

  15. Critical State of Sand Matrix Soils

    Directory of Open Access Journals (Sweden)

    Aminaton Marto

    2014-01-01

    Full Text Available The Critical State Soil Mechanic (CSSM is a globally recognised framework while the critical states for sand and clay are both well established. Nevertheless, the development of the critical state of sand matrix soils is lacking. This paper discusses the development of critical state lines and corresponding critical state parameters for the investigated material, sand matrix soils using sand-kaolin mixtures. The output of this paper can be used as an interpretation framework for the research on liquefaction susceptibility of sand matrix soils in the future. The strain controlled triaxial test apparatus was used to provide the monotonic loading onto the reconstituted soil specimens. All tested soils were subjected to isotropic consolidation and sheared under undrained condition until critical state was ascertain. Based on the results of 32 test specimens, the critical state lines for eight different sand matrix soils were developed together with the corresponding values of critical state parameters, M, λ, and Γ. The range of the value of M, λ, and Γ is 0.803–0.998, 0.144–0.248, and 1.727–2.279, respectively. These values are comparable to the critical state parameters of river sand and kaolin clay. However, the relationship between fines percentages and these critical state parameters is too scattered to be correlated.

  16. Death by a thousand cuts : impacts of in situ oil sands development on Alberta's boreal forest

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, R. [Canadian Parks and Wilderness Society, Edmonton, AB (Canada); Dyer, S. [Pembina Institute, Drayton Valley, AB (Canada)

    2006-08-15

    In situ oil sands development techniques are significantly more damaging to the environment than conventional oil extraction methods. The area impacted by oil sands development in Alberta is expected to be in the region of 13.8 million hectares, equal to 21 per cent of the province. In this report, the 10,600 hectare OPTI-Nexen Long Lake project was used as a case study of a state-of-the art steam assisted gravity drainage (SAGD) operation. The study suggested that a total of 8.3 per cent of the Long Lake lease will be cleared for SAGD infrastructure. Approximately 80 per cent of the land parcel will be within 250 m of an industrial feature. Nearly 24,000 m{sup 3} of water will be needed each day for steam production and processing. If all leases for oil sands development in Alberta are subjected to the same industrial footprint as the Long Lake project, 296,00 hectares of forest will be cleared and over 30,000 km of access roads will be built. The boreal forest in which the SAGD developments are taking place is home to many wildlife species who are sensitive to industrial disturbances. Habitats for many wildlife species will be reduced to small scattered islands, which may result in a serious decline in regional biodiversity. Ecological tipping points for many species are already being exceeded at current levels of industrial development. This report presented evidence from studies of caribou, furbearers such as lynx and martens and forest birds which indicated that some species are at risk of extirpation from oil sands development. The report recommended the immediate implementation of conservation offset measures such as the establishment of wildlife reserves where industrial development is not permitted. It was recommended that a cap be placed on cumulative industrial impacts to maintain basic ecological function. It was concluded that there is an urgent need for the development of a regional strategic plan that includes long-term management objectives that are

  17. The discordance between subjectively and objectively measured physical function in women with fibromyalgia: association with catastrophizing and self-efficacy cognitions. The al-Ándalus project.

    Science.gov (United States)

    Estévez-López, Fernando; Álvarez-Gallardo, Inmaculada C; Segura-Jiménez, Víctor; Soriano-Maldonado, Alberto; Borges-Cosic, Milkana; Pulido-Martos, Manuel; Aparicio, Virginia A; Carbonell-Baeza, Ana; Delgado-Fernández, Manuel; Geenen, Rinie

    2016-12-15

    People with fibromyalgia experience a disagreement between patient-reported (i.e., subjective) and performance-based (i.e., objective) status. This study aimed to (i) corroborate the discordance between subjectively and objectively measured physical function and (ii) examine whether catastrophizing (worrying, pain magnifying, and helpless cognitions) and self-efficacy (believing capable to manage pain) are independently associated with this discordance. This population-based cross-sectional study included 405 women with fibromyalgia and 193 age-matched female controls. Participants completed the Pain Catastrophizing Scale, Chronic Pain Self-efficacy Scale, and physical functioning subscales of the Revised Fibromyalgia Impact Questionnaire and Short Form-36 (SF-36) health survey. Objective physical function was measured with the Senior Fitness Test battery. Subjective and objective physical functions were expressed as deviation from the general population in standard deviation (SD) units using means and SD of the control group. In fibromyalgia, subjective physical function was worse than objective physical function (p ability to do meaningful activities of daily living (i.e., restrictions) that people with fibromyalgia are actually able to. Therefore, catastrophizing should be assessed and potentially targeted when focusing on improving physical function in fibromyalgia. Implications for rehabilitation Rehabilitation should focus on physical exercise programs to help women with fibromyalgia to improve their reduced physical function. In rehabilitation settings, physical function of people with fibromyalgia should be evaluated by both subjective and objective assessments to fully understand physical functioning and to test the existence of discordance between both assessments. In case of a large discordance between subjective and objective physical function, a physical exercise program might be better complemented with cognitive management techniques to reduce

  18. Invasive plants on disturbed Korean sand dunes

    Science.gov (United States)

    Kim, Kee Dae

    2005-01-01

    The sand dunes in coastal regions of South Korea are important ecosystems because of their small size, the rare species found in this habitat, and the beautiful landscapes they create. This study investigated the current vegetative status of sand dunes on three representative coasts of the Korean peninsula, and on the coasts of Cheju Island, and assessed the conditions caused by invasive plants. The relationships between the degree of invasion and 14 environmental variables were studied. Plots of sand dunes along line transects perpendicular to the coastal lines were established to estimate vegetative species coverage. TWINSPAN (Two-Way Indicator Species Analysis), CCA (Canonical Correspondence Analysis), and DCCA (Detrended Canonical Correspondence Analysis) were performed to classify communities on sand dunes and assess species composition variation. Carex kobomugi, Elymus mollis, and Vitex rotundifolia were found to be the dominant species plotted on the east, the west, and the peripheral coasts of Cheju Island, respectively. Vegetation on the south coast was totally extinct. The 19 communities, including representative C. kobomugi, C. kobomugi- Ixeris repens, C. kobomugi- Oenothera biennis, E. mollis, Lolium multiflorum- Calystegia soldanella, and V. rotundifolia- C. kobomugi, were all classified according to TWINSPAN. Oenothera biennis and L. multiflorum were exotics observed within these native communities. CCA showed that invasive native and exotic species distribution was segregated significantly, according to disturbance level, exotic species number, gravel, sand and silt contents, as well as vegetation size. It further revealed that human disturbance can strongly favor the settlement of invasive and exotic species. Restoration options to reduce exotic plants in the South Korean sand dune areas were found to be the introduction of native plant species from one sand dune into other sand dune areas, prohibition of building and the introduction of exotic

  19. Historical trends in greenhouse gas emissions of the Alberta oil sands (1970-2010)

    Science.gov (United States)

    Englander, Jacob G.; Bharadwaj, Sharad; Brandt, Adam R.

    2013-12-01

    There has been increased scrutiny of the Alberta oil sands due to their high carbon intensity (CI) relative to conventional crude oil. Relying entirely on public and peer-reviewed data sources, we examine historical trends in the CI of oil sands extraction, upgrading, and refining. Monthly data were collected and interpolated from 1970 to 2010 (inclusive) for each oil sands project. Results show a reduction in oil sands CI over time, with industry-average full-fuel cycle (well-to-wheels, WTW) CI declining from 165 gCO2e MJ-1 higher heating value (HHV) of reformulated gasoline (RFG) to 105 (-12, +9) gCO2e MJ-1 HHV RFG. 2010 averages by production pathways are 102 gCO2e MJ-1 for Mining and 111 gCO2e MJ-1 for in situ. The CI of mining-based projects has declined due to upgrader efficiency improvements and a shift away from coke to natural gas as a process fuel. In situ projects have benefitted from substantial reductions in fugitive emissions from bitumen batteries. Both mining and in situ projects have benefitted from improved refining efficiencies. However, despite these improvements, the CI of oil sands production (on a pathway-average basis) ranges from 12 to 24% higher than CI values from conventional oil production. Due to growing output, total emissions from the oil sands continue to increase despite improved efficiency: total upstream emissions were roughly 65 MtCO2e in 2010, or 9% of Canada’s emissions.

  20. Effectiveness of the Tier 1 Program of the Project P.A.T.H.S.: Preliminary Objective and Subjective Outcome Evaluation Findings

    Directory of Open Access Journals (Sweden)

    Daniel T.L. Shek

    2006-01-01

    Full Text Available There are two tiers of programs in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes. In the Tier 1 Program, teaching units based on different positive youth development constructs are covered. Pre- and post-test data utilizing the Chinese Positive Youth Development Scale (CPYDS and post-test subjective outcome evaluation data were collected from 546 students who participated in the 20h Tier 1 Program of the P.A.T.H.S. Project. Results showed that high proportions of the respondents had positive perceptions of the program and the instructors, with 85.3% of the respondents regarding the program as helpful to them. Positive changes in the program participants in many measures of positive youth development were also observed. Although there were some increases in problem behavior in some areas, adolescent problem behavior was generally stable. The present study provides preliminary support for the effectiveness of the Tier 1 Program of the Project P.A.T.H.S. in Hong Kong.

  1. Effectiveness of the Tier 1 Program of the Project P.A.T.H.S.: preliminary objective and subjective outcome evaluation findings.

    Science.gov (United States)

    Shek, Daniel T L

    2006-11-16

    There are two tiers of programs in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes). In the Tier 1 Program, teaching units based on different positive youth development constructs are covered. Pre- and post-test data utilizing the Chinese Positive Youth Development Scale (CPYDS) and post-test subjective outcome evaluation data were collected from 546 students who participated in the 20 h Tier 1 Program of the P.A.T.H.S. Project. Results showed that high proportions of the respondents had positive perceptions of the program and the instructors, with 85.3% of the respondents regarding the program as helpful to them. Positive changes in the program participants in many measures of positive youth development were also observed. Although there were some increases in problem behavior in some areas, adolescent problem behavior was generally stable. The present study provides preliminary support for the effectiveness of the Tier 1 Program of the Project P.A.T.H.S. in Hong Kong.

  2. Evaluation of conducting a screening assessment of nutritional status of hospitalized patients. Presentation of main goals and objectives of the global health project "NutritionDay".

    Science.gov (United States)

    Jeznach-Steinhagen, Anna; Ostrowska, Joanna; Czerwonogrodzka-Senczyna, Aneta

    2016-01-01

    European Society for Clinical Nutrition and Metabolism (ESPEN) commenced in 2004 a global health project named "NutritionDay" aiming to promote awareness of proper nutritional status of hospitalized patients and to draw attention to the need for early detection of malnutrition among patients. Under the Polish law--pursunat to the regulation of the Minister of Health dated September 15, 2011 (amendment as of 27.12.2013)--a nutritional status of each patient should be assessed at the time of a hospital admission. of this study was to analyze the fulfilment of the mandatory questionnaire assessment of nutritional status at selected wards of one of Warsaw's clinical hospitals. The study included an analysis of medical records of patients hospitalized within 6 months (n = 26375). The correct fulfilment of screening questionnaire assessing nutritional status (NRS 2002 survey) and the information about patients' body weight as well as the results assessment of nutritional status were subject to the analysis. NRS 2002 questionnaire was present in only 67,14% medical records of patients, however 49.24% of them were unfilled. The obtained results confirming low degree of NRS 2002 questionnaires' fulfilment in one of the Warsaw clinical hospitals draws attention to the need for education of hospital personnel in the field of significance of screening of nutritional assessment and its regulations. The "NutritionDay" project is an interesting form to attract attention of the aforementioned problem and its global extent additionally encourage medical units to participate in the project.

  3. Numerical research on evolvement of submarine sand waves in the Northern South China Sea

    Science.gov (United States)

    Zhou, Qikun; Hu, Guanghai; Sun, Yongfu; Liu, Xiaohui; Song, Yupeng; Dong, Lifeng; Dong, Changming

    2016-05-01

    Submarine sand waves, vital to seabed stability, are an important consideration for oceanic engineering projects such as oil pipe lines and submarine cables. The properties of surface sediment and the evolvement of submarine sand waves in a specified area in the South China Sea are studied using both a hydrological model and field observational data. The bottom flow field data between 2010 and 2011 in the study area are simulated by the Regional Ocean Model System (ROMS). The migration of submarine sand waves is calculated using Rubin's formula along with typhoon data and bottom flow field data, which allows for the analysis of sand wave response under the influence of typhoons. The migration direction calculated by Rubin's formula and bottom flow are very similar to collected data. The migration distance of different positions is between 0.0 m and 21.8 m, which reciprocates cumulatively. This shows that Rubin's formula can predict the progress of submarine sand waves with the bottom flow simulated by ROMS. The migration distances of 2 sites in the study area are 2.0 m and 2.9 m during the typhoon "Fanapi". The proportion of the calculated migration distance by the typhoon is 9.17% and 26.36% of the annual migration distance, respectively, which proves that the typhoon can make a significant impact on submarine sand waves.

  4. Numerical research on evolvement of submarine sand waves in the Northern South China Sea

    Science.gov (United States)

    Zhou, Qikun; Hu, Guanghai; Sun, Yongfu; Liu, Xiaohui; Song, Yupeng; Dong, Lifeng; Dong, Changming

    2017-03-01

    Submarine sand waves, vital to seabed stability, are an important consideration for oceanic engineering projects such as oil pipe lines and submarine cables. The properties of surface sediment and the evolvement of submarine sand waves in a specified area in the South China Sea are studied using both a hydrological model and field observational data. The bottom flow field data between 2010 and 2011 in the study area are simulated by the Regional Ocean Model System (ROMS). The migration of submarine sand waves is calculated using Rubin's formula along with typhoon data and bottom flow field data, which allows for the analysis of sand wave response under the influence of typhoons. The migration direction calculated by Rubin's formula and bottom flow are very similar to collected data. The migration distance of different positions is between 0.0 m and 21.8 m, which reciprocates cumulatively. This shows that Rubin's formula can predict the progress of submarine sand waves with the bottom flow simulated by ROMS. The migration distances of 2 sites in the study area are 2.0 m and 2.9 m during the typhoon "Fanapi". The proportion of the calculated migration distance by the typhoon is 9.17% and 26.36% of the annual migration distance, respectively, which proves that the typhoon can make a significant impact on submarine sand waves.

  5. Formation mechanism of cracks in saturated sand

    Institute of Scientific and Technical Information of China (English)

    Xiaobing Lu; Zhemin Zheng; Yongren Wu

    2006-01-01

    The formation mechanism of "water film" (or crack) in saturated sand is analyzed theoretically and numerically.The theoretical analysis shows that there will be no stable "water film" in the saturated sand if the strength of the skeleton is zero and no positions are choked.It is shown by numerical simulation that stable water films initiate and grow if the choking state keeps unchanged once the fluid velocities decrease to zero in the liquefied sand column.The developments of "water film" based on the model presented in this paper are compared with experimental results.

  6. Lund Sand No 0:part 2

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  7. Lund Sand No 0:part 1

    OpenAIRE

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    1996-01-01

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve test, Grain density, ds, Maximum, emax, and minimum, emin, void ratio. The strength parameters of Lund No 0 are detennined by some drained and undrained triaxial tests in the Danish Triaxial Cell. T...

  8. Biodegradable materials as foundry moulding sands binders

    Directory of Open Access Journals (Sweden)

    K. Major - Gabryś

    2015-07-01

    Full Text Available The aim of this article is to show the possibility of using biodegradable materials as part of the composition of foundry moulding and core sand binders. Research shows that moulding sands with biodegradable materials selected as binders are not only less toxic but are also better suited to mechanical reclamation than moulding sands with phenol-furfuryl resin. The use of biodegradable materials as additives to typical synthetic resins can result in their decreased toxicity and improved ability to reclamation as well as in accelerated biodegradation of binding material leftovers of mechanical reclamation.

  9. A Multi-objective Fuzzy Decision Method for Hydroelectric Power Project Investment%水电项目投资的多目标模糊决策方法

    Institute of Scientific and Technical Information of China (English)

    赖一飞; 纪昌明

    2001-01-01

    对水电项目投资方案多目标决策问题进行了研究.根据多目标模糊优化的基本原理,结合目标相对优属度概念,给出了多目标模糊决策中通过回归确定权重的方法,同时提出了基于权重回归组合的水电项目投资多目标决策模糊优化方法,通过实例验证了该模型的合理性和有效性%Problem of multi-objective decision for hydroelectric powerproject investment is proposed in this paper. On the basis of fundamental principle of multi-objective fuzzy optimization,this paper advanced a multi-objective fuzzy model to optimize hydroelectric power project investment schemes based on the regressive and composite method that analyses the objective importance.Numerical results show availability and effectiveness of multi-objective decision for hydroelectric power project investment by an example.

  10. Agile Objects

    Science.gov (United States)

    German, Senta; Harris, Jim

    2017-01-01

    In this article, the authors argue that the art-historical canon, however it is construed, has little relevance to the selection of objects for museum-based teaching. Their contention is that all objects are fundamentally agile and capable of interrogation from any number of disciplinary standpoints, and that the canon of museum education,…

  11. Effect of type of practice in a computer-aided design environment in visualizing three-dimensional objects from two-dimensional orthographic projections.

    Science.gov (United States)

    Duesbury, R T; O'Neil, H F

    1996-06-01

    The purpose of this study was to determine the effect of practice in manipulating 2- and 3-dimensional (D) wireframe images on a learner's ability to visualize 3-D objects. Practice, either rotational or not, consisted of visualizing 2- and 3-D objects generated by personal computer (PC)-based computer-assisted design software. Results indicated that participants in the rotation treatment group performed significantly better than those in either the nonrotation or control group on measures of spatial ability and 3-D visualization ability. Both treatment groups performed significantly better than the control group on measures of metacognition, effort, and worry. These results support a conclusion that spatial ability can be improved through practice that allows the learner to see the relationship between the 2-D and 3-D features of objects.

  12. The Barcelona Dust Forecast Center: The first WMO regional meteorological center specialized on atmospheric sand and dust forecast

    Science.gov (United States)

    Basart, Sara; Terradellas, Enric; Cuevas, Emilio; Jorba, Oriol; Benincasa, Francesco; Baldasano, Jose M.

    2015-04-01

    The World Meteorological Organization's Sand and Dust Storm Warning Advisory and Assessment System (WMO SDS-WAS, http://sds-was.aemet.es/) project has the mission to enhance the ability of countries to deliver timely and quality sand and dust storm forecasts, observations, information and knowledge to users through an international partnership of research and operational communities. The good results obtained by the SDS-WAS Northern Africa, Middle East and Europe (NAMEE) Regional Center and the demand of many national meteorological services led to the deployment of operational dust forecast services. On June 2014, the first WMO Regional Meteorological Center Specialized on Atmospheric Sand and Dust Forecast, the Barcelona Dust Forecast Center (BDFC; http://dust.aemet.es/), was publicly presented. The Center operationally generates and distributes predictions for the NAMEE region. The dust forecasts are based on the NMMB/BSC-Dust model developed at the Barcelona Supercomputing Center (BSC-CNS). The present contribution will describe the main objectives and capabilities of BDFC. One of the activities performed by the BDFC is to establish a protocol to routinely exchange products from dust forecast models as dust load, dust optical depth (AOD), surface concentration, surface extinction and deposition. An important step in dust forecasting is the evaluation of the results that have been generated. This process consists of the comparison of the model results with multiple kinds of observations (i.e. AERONET and MODIS) and is aimed to facilitate the understanding of the model capabilities, limitations, and appropriateness for the purpose for which it was designed. The aim of this work is to present different evaluation approaches and to test the use of different observational products in the evaluation system.

  13. Watching Faults Grow in Sand

    Science.gov (United States)

    Cooke, M. L.

    2015-12-01

    Accretionary sandbox experiments provide a rich environment for investigating the processes of fault development. These experiments engage students because 1) they enable direct observation of fault growth, which is impossible in the crust (type 1 physical model), 2) they are not only representational but can also be manipulated (type 2 physical model), 3) they can be used to test hypotheses (type 3 physical model) and 4) they resemble experiments performed by structural geology researchers around the world. The structural geology courses at UMass Amherst utilize a series of accretionary sandboxes experiments where students first watch a video of an experiment and then perform a group experiment. The experiments motivate discussions of what conditions they would change and what outcomes they would expect from these changes; hypothesis development. These discussions inevitably lead to calculations of the scaling relationships between model and crustal fault growth and provide insight into the crustal processes represented within the dry sand. Sketching of the experiments has been shown to be a very effective assessment method as the students reveal which features they are analyzing. Another approach used at UMass is to set up a forensic experiment. The experiment is set up with spatially varying basal friction before the meeting and students must figure out what the basal conditions are through the experiment. This experiment leads to discussions of equilibrium and force balance within the accretionary wedge. Displacement fields can be captured throughout the experiment using inexpensive digital image correlation techniques to foster quantitative analysis of the experiments.

  14. Sand erosion at the toe of a gabion-protected dune face

    NARCIS (Netherlands)

    Chapman, A.

    1992-01-01

    The purpose of this research project was to study the manner in which erosion takes place the the toe of a dune slope protected by gabions, and to examine the response of the gabions to this erosion. A sand slope overlaid by model gabions was subjected to wave attack in a hydraulic flume, and period

  15. Drift sands, lakes, and soils: the multiphase Holocene history of the Laarder Wasmeren area near Hilversum

    NARCIS (Netherlands)

    Sevink, J.; Koster, E.A.; van Geel, B.; Wallinga, J.

    2013-01-01

    A unique complex of multiphased Holocene drift sands and paleosols, with at least two lacustrine phases, was discovered during a major sanitation project in the Laarder Wasmeren area near Hilversum, the Netherlands. The complex could be studied in detail, highly facilitated by the excellent and larg

  16. Post-Secondary Learning Priorities of Workers in an Oil Sands Camp in Northern Alberta

    Science.gov (United States)

    Fahy, Patrick J.; Steel, Nancy

    2008-01-01

    This paper reports results to date of a three-year project by Athabasca University, intended to determine the education and training needs and interests of employees in a work camp in northern Alberta's oil sands. (Future reports will address results of efforts to provide programming suiting the needs identified, and the uptake, satisfaction,…

  17. Oil sand process-affected water treatment using coke adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Gamal El-Din, M.; Pourrezaei, P.; Chelme-Ayala, P.; Zubot, W. [Alberta Univ., Edmonton, AB (Canada). Dept. of Civil and Environmental Engineering

    2010-07-01

    Oil sands operations generate an array of oil sands process-affected water (OSPW) that will eventually be released to the environment. This water must be evaluated within conventional and advanced water treatment technologies. Water management strategies propose options for increased reuse and recycling of water from settling ponds, as well as safe discharge. This presentation outlined the typical composition of OSPW. Constituents of concern in OSPW include suspended solids, hydrocarbons, salts, ammonia, trace metals, and dissolved organics such as naphthenic acids (NAs). Petroleum coke is one of the by-products generated from bitumen extraction in the oil sands industry and can be used as one of the possible treatment processes for the removal of organic compounds found in OSPW. Activated carbon adsorption is an effective process, able to adsorb organic substances such as oils, radioactive compounds, petroleum hydrocarbons, poly aromatic hydrocarbons and various halogenated compounds. The objectives of this study were to evaluate the production of activated carbon from petroleum coke using steam as the activation media; to determine the factors affecting the absorption of NAs; and to evaluate the activated coke adsorption capacity for the reduction of NAs and dissolved organic carbons present in OSPW. It was concluded that petroleum non-activated coke has the ability to decrease COD, alkalinity, and NA concentration. tabs., figs.

  18. Natural radioactivity and radon specific exhalation rate of zircon sands

    Energy Technology Data Exchange (ETDEWEB)

    Righi, S.; Verita, S.; Bruzzi, L. [Bologna Univ., Centro Interdipartimentale di Ricerca per le Scienze Ambientali and Dipt. di Fisica, Ravenna (Italy); Albertazzi, A. [Italian Ceramic Center, Bologna (Italy)

    2006-07-01

    The study focuses on the radon emanation from zircon sands and their derivatives, which are widely used in many sectors of industry. In particular, the results obtained by experimental measurements on samples of zircon sands and zircon flours commonly used in Italian ceramic industries are reported. Zircon sands contain a significant concentration of natural radioactivity because Th and U may substitute zirconium in the zircon crystal lattice. The relevant routes of exposure of workers to T.E.N.O.R.M. from zircon materials are external radiation and internal exposure, either by inhalation of aerosols in dusty working conditions or by inhalation of radon in workplaces. The main objective of this investigation is to provide experimental data able to better calculate the internal exposure of workers due to radon inhalation. Zircon samples were surveyed for natural radioactivity, radon specific exhalation rate and emanation fraction. Measurements of radioactivity concentration were carried out using {gamma}-spectrometry. Methods used for determining radon consisted in determining the {sup 222}Rn activity accumulated in a vessel after a given accumulation build-up time. The average activity concentrations of {sup 238}U and {sup 232}Th in samples result about 2600 and 550 Bq kg-1, respectively; these concentrations are significantly higher than the world average noticed in soils, rocks and Earth crust. The {sup 222}Rn specific exhalation rates result very low probably due to the low porosity of the material and the consequent difficulty for radon to be released from the zircon crystal lattice. (author)

  19. Effect of Chromite-Silica Sands Characteristics on Performance of Ladle Filler Sands for Continuous Casting

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Free opening rate is mainly determined by the performance of the ladle filler sand. High free opening rates of ladles are required in steel making to improve steel quality. Chromite ladle filler sands are one of the most widely used ladle filler sand. Several operative variables and materials characteristics affect the performance of the sands. Three sets of chromite ladle filler sands were selected and researches were focused on the sintering hehaviour and per- formance of the sands under operative conditions. The effect of particle size distribution on sintering, microstruc- ture, flowability, and permeability were presented. In all cases, the particle size varies from 0.1 to 1.5 mm corre- sponding to free flowing powders. One of the samples has higher permeability factor in comparison with others due to low particle size distribution. The other sample presents very good free opening due to its very good flowability and permeability factor.

  20. Developing Local Narratives for Objects in National Collections : Lessons Learned from the “Number Please? Working with the Enfield Exchange” Project

    NARCIS (Netherlands)

    Geoghegan, H.; McIlvenna, K.; van der Vaart, M.

    Museums of science, technology, and engineering are developing new ways of interpreting and displaying their collections. Increasingly objects are being placed within narratives of everyday use; the human side of technology. The focus of this article is a section of one of the last UK manual

  1. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    Global applications of pesticides in agricultural production have led to the detection of trace amounts of pesticides in groundwater resources in levels exceeding the EU threshold limit for drinking water of 0.1 µg L-1. Pesticide-polluted groundwater may be remediated by inoculating waterworks sand...... for degradation performances in flow-through sand columns, with the aim of identifying a suitable inoculant strain for future environmental applications. Another aim was to identify a suitable genetic marker to monitor phenoxy acid degradation in strain Sphingobium sp. PM2. We were not able to link motility...... and biofilm formation to the strains´ ability to adhere to sand. Nevertheless, a correlation was found between cell surface hydrophobicity and adhesion and overall degradation performances in flow-through sand columns. We identified S phingobium sp. PM2 as a promising inoculant strain, displaying efficient...

  2. Petrophysical Analysis of Oil Sand in Athabasca

    Science.gov (United States)

    cheong, S.; Lee, H.

    2013-12-01

    Oil sands are the major unconventional energy sources which have great reserves in Alberta, Canada. Recovery techniques such as CSS (Cyclic Steam Stimulation) and SAGD (Steam Assisted Gravity Drainage) enabled to develop deeper bitumen about several hundred meter depth. Before applying CSS and SAGD, reservoir heterogeneity of mud barriers or shale breccias should be clarified to establish injection and production wells successfully. We conducted the integrated petro-physical analysis for oil sands deposits in Athabasca by correlating well logs with seismic data. From 33 well logs and 3D seismic, we have made P-wave impedance by recursive inversion. Target formations of our analysis were the top of Wabiskaw member. Using inverted impedance and multi-attributes, porosity volume was derived at a target depth. Porosity of time slice 375 ms ranged 20 ~ 40 % stretching porous sand body from NE to SW direction. Characteristics of porosity distribution may be useful to design optimum oil sands recovery in Athabasca.

  3. Carbon cycle: New pathways in the sand

    Science.gov (United States)

    Rao, Alexandra

    2017-01-01

    Organic carbon decomposition in anoxic marine sediments was thought to be dominated by bacteria, but experimental data and microbial culture studies now show that microalgae buried in coastal sands may also play an important role in carbon turnover.

  4. K West Basin Sand Filter Backwash Sample Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smoot, Margaret R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Coffey, Deborah S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pool, Karl N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    A sand filter is used to help maintain water clarity at the K West Basin where highly radioactive sludge is stored. Eventually that sand filter will require disposal. The radionuclide content of the solids trapped in the sand filter will affect the selection of the sand filter disposal pathway. The Pacific Northwest National Laboratory (PNNL) was contracted by the K Basin Operations & Plateau Remediation Project (operations contractor CH2M Hill) to analyze the radionuclide content of the solids collected from the backwash of the K West Basin sand filter. The radionuclide composition in the sand filter backwash solids will be used by CH2M Hill to determine if the sand filter media and retained sludge solids will be designated as transuranic waste for disposal purposes or can be processed through less expensive means. On October 19, 2015, K Basin Operations & Plateau Remediation Project staff backwashed the sand filter into the North Load-Out Pit (NLOP) and immediately collected sample slurry from a sampling tube positioned 24 in. above the NLOP floor. The 764 g sand filter backwash slurry sample, KW-105 SFBW-001, was submitted to PNNL for analysis on October 20, 2015. Solids from the slurry sample were consolidated into two samples (i.e., a primary and a duplicate sample) by centrifuging and measured for mass (0.82 g combined – wet centrifuged solids basis) and volume (0.80 mL combined). The solids were a dark brown/orange color, consistent with iron oxide/hydroxide. The solids were dried; the combined dry solids mass was 0.1113 g, corresponding to 0.0146 weight percent (wt%) solids in the original submitted sample slurry. The solids were acid-digested using nitric and hydrochloric acids. Insoluble solids developed upon dilution with 0.5 M HNO3, corresponding to an average 6.5 wt% of the initial dry solids content. The acid digestate and insoluble solids were analyzed separately by gamma spectrometry. Nominally, 7.7% of the 60Co was present

  5. Trusted Objects

    Energy Technology Data Exchange (ETDEWEB)

    CAMPBELL,PHILIP L.; PIERSON,LYNDON G.; WITZKE,EDWARD L.

    1999-10-27

    In the world of computers a trusted object is a collection of possibly-sensitive data and programs that can be allowed to reside and execute on a computer, even on an adversary's machine. Beyond the scope of one computer we believe that network-based agents in high-consequence and highly reliable applications will depend on this approach, and that the basis for such objects is what we call ''faithful execution.''

  6. CRADE OF SAND AND DUST STORM WEATHER

    Institute of Scientific and Technical Information of China (English)

    Niu Ruoyun; Tian Cuiying; Bi Baogui; Yang Keming; Wang Youheng; Tuo Ya; Ding Haifang; Zhang Tairen

    2011-01-01

    Background Sand and dust storm,as one of the main disastrous weathers that affect northern China,not only affect the people health and normal life,but cause the short-term climatic changes due to the direct and indirect radiation of the earth-atmosphere system through the dust floating in the sky.The sand end dust weather and its potential harm on the national economy,ecological environment,social activities and other aspects have aroused worldwide concern.

  7. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  8. Response to Oil Sands Products Assessment

    Science.gov (United States)

    2015-09-01

    Tailings ponds are an operating facility common to all types of surface mining. For oil sands, tailings consisting of water , sand, clay, and residual ...oil, are pumped to these basins—or ponds— where settling occurs and water is recycled for reuse in the process. When the ponds are no longer required...of crude oil transported by tank vessel in Washington waters . In a 2013 Bloomburg Business news article , Dan Murtaugh states, “The dock probably

  9. Treating tar sands formations with dolomite

    Energy Technology Data Exchange (ETDEWEB)

    Vinegar, Harold J.; Karanikas, John Michael

    2010-06-08

    Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

  10. Pragmatics of reclaimed sand quality assessment recovered nowadays from various used sand systems

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2010-04-01

    Full Text Available The assessment of the reclamation degree of used sands is not a simple, clearly defined issue. The great variety of technologies ofmoulding and core sands, based on the organic and inorganic binders does not allow the use of a single, universal index assessing thedegree of reclamation. The article presents the problems of research relating to selection of proper criteria for assessing the degree ofreclamation process of used moulding and core sands deriving from different technologies. The most often applied in practice types ofused sands and the most adequate in practice methods of assessing the degrees of their reclamation were characterized.

  11. Analysis of sand particles' lift-off and incident velocities in wind-blown sand flux

    Institute of Scientific and Technical Information of China (English)

    Tian-Li Bo; Xiao-Jing Zheng; Shao-Zhen Duan; Yi-Rui Liang

    2013-01-01

    In the research of windblown sand movement,the lift-off and incident velocities of saltating sand particles play a significant role in bridging the spatial and temporal scales from single sand particle's motion to windblown sand flux.In this paper,we achieved wind tunnel measurements of the movement of sand particles near sand bed through improving the wind tunnel experimental scheme of paticle image velocimetry (PIV) and data processing method.And then the influence of observation height on the probability distributions of lift-off and incident velocities of sand particles was analyzed.The results demonstrate that the observation height has no obvious influence on the distribution pattern of the lift-off and incident velocities of sand particles,i.e.,the probability distribution of horizontal and vertical velocities of lift-off and incident sand particles follow a Gaussian distribution and a negative exponential distribution,respectively.However,it influences the center of the Gaussian distribution,the decay constant and the amplitude of the negative exponential distribution.

  12. Recent Sand Avalanching on Rabe Crater Dunes

    Science.gov (United States)

    2000-01-01

    Dark streaks on the steep, down-wind slopes of sand dunes in Rabe Crater are seen at several locations in this Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image. These streaks indicate relatively recent (i.e., in the past few years or less) movement of sand down these slopes.Sand dunes move forward by the combined action of wind that drives sand up the shallow slope on the windward side of the dune (in this case, the slopes that face toward the lower right) and the avalanching of this sand down the steeper, lee-side slope. The steep slope is also known as the slip face. The dark streaks indicated by arrows are evidence for sand avalanches that occurred within a few months or years of the time when the picture was taken in March 1999. Other streaks which are seen criss-crossing the dunes may be the result of passing dust devils. This image is illuminated from the upper left and located in Rabe Crater of the Hellespontus-Noachis region near 44.2oS, 325.6oW.

  13. Discrete particle simulation of mixed sand transport

    Institute of Scientific and Technical Information of China (English)

    Fengjun Xiao; Liejin Guo; Debiao Li; Yueshe Wang

    2012-01-01

    An Eulerian/Lagrangian numerical simulation is performed on mixed sand transport.Volume averaged Navier-Stokes equations are solved to calculate gas motion,and particle motion is calculated using Newton's equation,involving a hard sphere model to describe particle-to-particle and particle-to-wall collisions.The influence of wall characteristics,size distribution of sand particles and boundary layer depth on vertical distribution of sand mass flux and particle mean horizontal velocity is analyzed,suggesting that all these three factors affect sand transport at different levels.In all cases,for small size groups,sand mass flux first increases with height and then decreases while for large size groups,it decreases exponentially with height and for middle size groups the behavior is in-between.The mean horizontal velocity for all size groups well fits experimental data,that is,increasing logarithmically with height in the middle height region.Wall characteristics greatly affects particle to wall collision and makes the flat bed similar to a Gobi surface and the rough bed similar to a sandy surface.Particle size distribution largely affects the sand mass flux and the highest heights they can reach especially for larger particles.

  14. A Derivation of the Analytical Relationship between the Projected Albedo-Area Product of a Space Object and its Aggregate Photometric Measurements

    Science.gov (United States)

    2013-09-01

    is the small purple sphere, the solar panel is the green square, and the body is the blue cube . The vector is normal to the orbital plane of the...Fig. 3-1. Space Object Angles of Observation (not to scale)1. The blue cube represents the body and the green square represents the solar panel ...foundations. Then we derive, for the specific case of a three-axis stabilized satellite with a nadir-pointing body and articulating solar panels

  15. Predicting the occurrence of sand banks in the North Sea

    NARCIS (Netherlands)

    Veen, van der Henriët H.; Hulscher, Suzanne J.M.H.

    2009-01-01

    Sand banks have a wavelength between 1 and 10 km, and they are up to several tens of meters high. Also, sand banks may have an impact on large-scale human activities that take place in the North Sea like sand mining, shipping, offshore wind farms, etc. Therefore, it is important to know where sand b

  16. 基于现金流均衡目标的多模式项目调度问题研究%Multi-mode Project Scheduling Problems with Cash Flow Balanced Objectives

    Institute of Scientific and Technical Information of China (English)

    何正文; 刘人境; 徐渝

    2011-01-01

    A contractor needs to spend capital on project-related resources before receiving payment from customers for services delivered at each milestone. However, contractors have varying capital availabilities when implementing different projects. Thus,balancing cash inflows and outflows throughout the project life cycle is critical to project success for contractors.This paper studies multi-mode project scheduling problems with the goal of balancing cash inflows and outflows. We use the event-based method to represent a contractor's project schedule in the activity-on-node mode, and distribute project expenses to their beginning and ending activities. The objective of this exercise is to minimize the gap of a contractor's cumulative capital flows given the constraint of a fixed project deadline.We define two groups of decision variables in order to determine the modes of performing activities and the actual delivery date of events. A0-1 programming model is established to address cash flow problems. A simulated annealing heuristic algorithm with two nested loops is developed to solve cash flow problems. These two nested loops include inner and outer loops. The inner loop searches for a desirable vector of an event's completion time under a given activity's performing mode. The outer loop seeks the desirable vector of an event's completion time established by the inner loop. The simulation results show desirable solutions for cash problems in inner and outer loops. A contracted superhighway construction project is used as a case study to illustrate the use of our proposed simulated algorithm. This project is able to develop a satisfactory schedule. We compare the developed schedule with the actual schedule regarding key cash flow parameters, including project deadline, payment proportion, advance payment proportion, deposit rate of security payment, and objective function values.A contractor can maximize its cumulative capital gap by reducing the procrastination of

  17. Development of photoacoustic water vapor and total water measuring instrument with a long term objective of becoming part of the IAGOS project

    Science.gov (United States)

    Tatrai, David; Bors, Noemi; Gulyas, Gabor; Szabo, Gabor; Smit, Herman G. J.; Petzold, Andreas; Bozoki, Zoltan

    2016-04-01

    Airborne hygrometry is one of the key topics in atmospheric and climate research that is why airborne hygrometers are almost always included in aircraft based measurement campaigns (see e.g. MOZAIC and CARIBIC). However for its successful application an airborne hygrometer has to be able to measure humidity in a wide range (1 60000 ppmV) at various total pressures with high accuracy and short response time. In addition, an instrument capable of measuring water vapor and condensed water selectively has considerable added value as the water content of clouds seems to be a very uncertain parameter in climate models. At the University of Szeged, a dual channel, photoacoustic spectroscopy based hygrometer system had been developed, that measures water vapor concentration and total water content simultaneously from the ground level up to cruising altitude [1, 2]. An early version of this system is the core hygrometer of the CARIBIC project. In the past few years efforts were made to improve further the performance and long term reliability of the system [3] while also reducing its size and weight. Most important of the recent achievements is a new data acquisition and control system with more precise control performance [4]. Many of these results have been proved by various laboratory (AquaVIT2a-b) and in-flight (DANCHAR-IFCC, AIRTOSS I-II) measurement campaigns. Based on these results the system received invitation into the IAGOS ESFRI project to become one of its core instruments. The presented work was funded by EUFAR contract no. 227159, by the Hungarian Research and Technology Innovation Fund (OTKA), project no. NN109679 and by the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 312311. [1] Szakáll, M et.al: Infrared Physics & Technology. 2006. 48, (3) 192-201 [2] Szakáll, M. et.al: Infrared Physics & Technology, 2007. 51, (2) 113-121 [3] Tátrai, D. et.al: Atmos. Meas. Tech., 8, 33-42, 2015 [4] Tátrai, D. et

  18. Crushed and River-Origin Sands Used as Aggregates in Repair Mortars

    Directory of Open Access Journals (Sweden)

    Maria Stefanidou

    2016-04-01

    Full Text Available The systematic analysis of mortars from monuments or historic buildings and the simultaneous study of the construction environment show that it was common practice to use naturally occurring sand from local rivers or streams for the production of the mortars. There are cases though, mainly on islands, where sands of natural origin were limited, and marine or crushed sands were used possibly after elaboration. In all cases the particle size analysis of old mortar confirms the presence of even distribution of the granules. As regards the design of the repair mortars, there are criteria that should be taken into consideration in order to produce materials with compatible properties. The main properties concerning sands are the grain distribution and maximum size, the color, the content of fines, and soluble salts. The objective of this research is the study of the physical characteristics of the sands such as the sand equivalent, the gradation, the apparent density, the morphology of the grains, their mineralogical composition and the influence of these properties on the behavior of lime mortars, notably the mechanical and physical properties acquired.

  19. BENTONITE-QUARTZ SAND AS THE BACKFILL MATERIALS ON THE RADIOACTIVE WASTE REPOSITORY

    Directory of Open Access Journals (Sweden)

    Raharjo Raharjo

    2010-06-01

    Full Text Available An investigation of the contribution of quartz sand in the bentonite mixture as the backfill materials on the shallow land burial of radioactive waste has been done. The experiment objective is to determine the effect of quartz sand in a bentonite mixture with bentonite particle sizes of -20+40, -40+60, and -60+80 mesh on the retardation factor and the uranium dispersion in the simulation of uranium migration in the backfill materials. The experiment was carried out by the fixed bed method in the column filled by the bentonite mixture with a bentonite-to-quartz sand weight percent ratio of 0/100, 25/75, 50/50, 75/25, and 100/0 on the water saturated condition flown by uranyl nitrate solution at concentration (Co of 500 ppm. The concentration of uranium in the effluents in interval 15 minutes represented as Ct was analyzed by spectrophotometer, then using Co and Ct, retardation factor (R and dispersivity ( were determined. The experiment data showed that the bentonite of -60+80 mesh and the quartz sand of -20+40 mesh on bentonite-to-quartz sand with weight percent ratio of 50/50 gave the highest retardation factor and dispersivity of 18.37 and 0.0363 cm, respectively.   Keywords: bentonite, quartz sand, backfill materials, radioactive waste

  20. Temperature and moisture dependence of the dielectric properties of silica sand.

    Science.gov (United States)

    Liu, Chenhui; Zhang, Libo; Peng, Jinhui; Srinivasakannan, Chandrasekar; Liu, Bingguo; Xia, Hongying; Zhou, Junwen; Xu, Lei

    2013-01-01

    The major objective of this work was to investigate the effects of temperature and moisture content on the dielectric properties of silica sand. The dielectric properties of moist silica sand at five temperatures between 20 to 100 degrees C, covering different moisture content levels at a frequency of 2.45 GHz, were measured with an open-ended coaxial probe dielectric measurement system. The wave penetration depth was calculated based on the measured dielectric data. The results show moisture content to be the major influencing factor for the variation of dielectric properties. Dielectric constant, loss factor and loss tangent all increase linearly with increasing moisture content. Three predictive empirical models were developed to relate the dielectric constant, loss factor, loss tangent of silica sand as a linear function of moisture content. An increase in temperature between 20 to 100 degrees C was found to increase the dielectric constant and loss factor. The penetration depth decreased with increase in moisture content and temperature. Variation in penetration depth was found to vary linearly with decrease in moisture content. An predictive empirical model was developed to calculate penetration depth for silica sand. This study offers useful information on dielectric properties of silica sand for developing microwave drying applications in mineral processing towards designing better microwave sensors for measuring silica sand moisture content.

  1. Objective Outcome Evaluation of the Project P.A.T.H.S. in Hong Kong: Findings Based on Individual Growth Curve Models

    Directory of Open Access Journals (Sweden)

    Daniel T.L. Shek

    2010-01-01

    Full Text Available The Tier 1 Program of the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes is a curricular-based program that attempts to promote positive youth development in Hong Kong. In the second year of the Full Implementation Phase, 20 experimental schools (n = 2,784 students and 23 control schools (n = 3,401 students participated in a randomized group trial. Analyses based on linear mixed models via SPSS showed that participants in the experimental schools displayed better positive youth development than did participants in the control schools based on different indicators derived from the Chinese Positive Youth Development Scale. Differences between experimental and control participants were also found when students who joined the Tier 1 Program and perceived the program to be beneficial were employed as participants of the experimental schools.

  2. Oluvil Port Development Project

    DEFF Research Database (Denmark)

    Frigaard, Peter; Margheritini, Lucia

    Oluvil Port Development Project is the first development of a large port infrastructure in the entire eastern coastline of Sri Lanka. The project is supported by the Danish Foreign Ministry. Feasibility studies and detailed design studies were carried out by Lanka Hydraulic Institute Ltd during...... the years 1995 to 2003. The design was reviewed by COWI a/s. Construction of the port was started in 2008. MT Højgaard a/s acted as contractor. The outer breakwaters were constructed as first part of the project. During and after completion of the breakwaters a serious beach erosion and sand accumulation...... has been observed. Severe erosion is seen north of the harbour and some accumulation of sand is seen south of the harbour. On a sandy coastline like the one in Oluvil such erosion problems as observed are very typical. The report: Oluvil Port Development Project: Studies on Beach Erosion written...

  3. The Road to Objects

    Directory of Open Access Journals (Sweden)

    Graham Harman

    2011-09-01

    Full Text Available Harman presents an outline of how object-oriented ontology (OOO differentiates itself from other branches of speculative realism. Can OOO steer philosophy from an epistemological project that tends to reduce the discipline to "a series of small-time drug busts"?

  4. The Road to Objects

    OpenAIRE

    Graham Harman

    2011-01-01

    Harman presents an outline of how object-oriented ontology (OOO) differentiates itself from other branches of speculative realism. Can OOO steer philosophy from an epistemological project that tends to reduce the discipline to "a series of small-time drug busts"?

  5. Development of the Gran Desierto sand sea, northwestern Mexico

    Science.gov (United States)

    Blount, Grady; Lancaster, Nicholas

    1990-08-01

    Three major eolian sand populations can be recognized in the Gran Desierto sand sea of northwestern Mexico by using spectral data from the Landsat thematic mapper in conjunction with textural and mineralogical studies of surface sands. Each sand population has distinct textural, mineralogic, and spectral properties that can be related to sand-dune morphology and position with reference to source areas and transport paths of the sands. The oldest eolian sediment in the sand sea was derived from the early to middle Pleistocene Colorado River that flowed through the area of the western Gran Desierto. Subsequent inputs of eolian sands came from the area of the present Colorado River valley and the coast south of the sand sea. The spatial and temporal pattern of eolian deposition in the region has been controlled by Quaternary tectonic and climatic changes, resulting in the episodic input and deposition of sand.

  6. Sand flies (Diptera: Psychodidae) in the urban area of the municipality of Cianorte, Paraná State, Brazil.

    Science.gov (United States)

    Cerino, Daniela A; Teodoro, Ueslei; Silveira, Thaís G V

    2009-01-01

    The endemicity of American cutaneous leishmaniasis (ACL) in the Cianorte municipality, Paraná State the occurrence of human cases with the probable infection locus in the urban area, the presence of a permanently preserved modified native forest in the urban perimeter, and the lack of knowledge of the fauna of sand flies in the municipality provided the impetus for this study. The objective of this study was to assess the fauna, frequency and seasonality of the sand flies in the peridomicile, forest and urban area of this municipality. Sand flies were collected using Falcão light traps installed in the peridomicile and forest, from July 2005 to June 2006. A total of 755 sand flies were collected; Nyssomyia whitmani (Antunes & Coutinho) (84.0%), followed by Nyssomyia neivai (Pinto) (12.7%) were the predominant species. The number of sand flies collected in the peridomicile was significantly higher than in the forest (P = 0.0068). The small number of sand flies collected, especially in the forest, may be related to the modifications to the environment on the edge of the Parque Cinturão Verde, which surrounds the urban area of the municipality. Five species of sand flies were distinguished in the urban area of Cianorte, with greater frequencies found in the peridomicile, especially from November to April. Our data illustrate the necessity of maintaining the measures that contributed to reduce human contact with sand flies, thereby reducing the transmission risk of ACL.

  7. Fashion Objects

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2009-01-01

    This article attempts to create a framework for understanding modern fashion phenomena on the basis of Durkheim's sociology of religion. It focuses on Durkheim's conception of the relation between the cult and the sacred object, on his notion of 'exteriorisation', and on his theory of the social...... symbol in an attempt to describe the peculiar attraction of the fashion object and its social constitution. However, Durkheim's notions of cult and ritual must undergo profound changes if they are to be used in an analysis of fashion. The article tries to expand the Durkheimian cult, radically enlarging...... it without totally dispersing it; depicting it as held together exclusively by the sheer 'force' of the sacred object. Firstly, the article introduces the themes and problems surrounding Durkheim's conception of the sacred. Next, it briefly sketches an outline of fashion phenomena in Durkheimian categories...

  8. Sands modeling constrained by high-resolution seismic data

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In the phase of field evaluation, the changing ofinterwell reservoir may be out of control ifthe geological model was built only on well data due to few existing wells. The uncertainty of the interwell reservoir interpolation based only on well data can be decreased by comprehensive utilization of geological, logging and seismic data, especially by using highly relative seismic properties from 3D seismic data adjusted by well point data to restrict interpolation of geological properties. A 3D-geological model which takes the sand body as the direct modeling object was built through stacking the structure, reservoir and water/oil/gas properties together in 3D space.

  9. Incorporating Environmental Objectives into the Design Process of Large Made-to-Order Projects. A Case Study of Two Design Teams

    Directory of Open Access Journals (Sweden)

    J. L. Stoyell

    2000-01-01

    Full Text Available Environmetal performance needs to be considered during the conceptual design of Large Made-to-Order products and processes. This paper presents work from a case-study of two such companies based on the study of current practice. Key design activities are modeled using an IDEFO based methodology to investigate opportunities for improvement and to isolate the main barriers against achieving clean design. A system for the transfer of client level environmental objectives to the design team is proposed in order to achieve clean design.

  10. Effects of advanced oxidation on green sand properties via iron casting into green sand molds.

    Science.gov (United States)

    Wang, Yujue; Cannon, Fred S; Voigt, Robert C; Komarneni, Sridhar; Furness, J C

    2006-05-01

    The effects of advanced oxidation (AO) processing on the properties of green sand were studied via pouring cast iron into green sand molds. Upon cooling, the green sand molds were autopsied at various distances from the metal-sand interface. Autopsy green sand samples collected from a mold that incorporated AO water were characterized and compared to controlled samples collected from a similar autopsied mold made with conventional tap water (TAP). It was found that the AO processing removed a coating of coal pyrolysis products from the clay surface that typically accumulated on the clay surface. As a result, the AO-conditioned green sand retained 10-15% more active clay as measured bythe standard ultrasonic methylene blue titration than did the TAP-conditioned green sand. The AO processing also nearly doubled the generation of activated carbon from the normalized amount of coal composition of the green sand during the casting process. The AO-enhanced activated carbon generation and the AO-incurred clay surface cleaning provided the AO-conditioned green sand with higher normalized pore volume, and thus higher normalized m-xylene adsorption capacity, i.e., relative to before-metal-pouring conditions. Furthermore, mathematical analysis indicated that the AO-conditioned green sand better retained its important properties after pouring than did the TAP-conditioned green sand. Effectively, this meant after metal pouring, the AO-conditioned sample offered about the same net properties as the TAP-conditioned sample, even though the AO-conditioned sample contained less clay and coal before metal pouring. These results conformed to the full-scale foundry empirical finding that when AO is used, foundries need less makeup clay and coal addition through each casting cycle, and they release less air emissions.

  11. Relationship Between Casting Distortion, Mold Filling, and Interfacial Heat Transfer in Sand Molds

    Energy Technology Data Exchange (ETDEWEB)

    J. K. Parker; K. A. Woodbury; T. S. Piwonka; Y. Owusu

    1999-09-30

    This project sought to determine the relationship between casting dimensions and interfacial heat transfer in aluminum alloy sand castings. The program had four parts; measurement of interfacial heat transfer coefficients in resin bonded and green sand molds, the measurement of gap formation in these molds, the analysis of castings made in varying gatings, orientations and thicknesses, and the measurement of residual stresses in castings in the as-cast and gate removed condition. New values for interfacial heat transfer coefficients were measured, a novel method for gap formation was developed, and the variation of casting dimensions with casting method, gating, and casting orientation in the mold was documented.

  12. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice-age deposits were reactivated as drift sand du

  13. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand du

  14. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand

  15. Object-oriented Project Cost Database Software Model Analysis%面向对象的工程造价数据库软件模型分析

    Institute of Scientific and Technical Information of China (English)

    蒙钟介

    2011-01-01

    面向对象的软件开发基于从可重用的部件来开发系统这一思想。它不是把系统定义作数据和功能两个独立部分,而是把系统定义成相互作用对象的容器。软件开发在宏观上是一个序列,在微观上是一个反复过程,随着时间推移而递进增长。%Object-oriented software development based on reusable components from the system to develop this idea.It is not the system-defined functions for data and two separate parts,but the interaction of the system defined as a container for objects.Software development at the macro is a sequence in the micro is an iterative process,the progressive growth over time.

  16. Life cycle greenhouse gas emissions of current oil sands technologies: GHOST model development and illustrative application.

    Science.gov (United States)

    Charpentier, Alex D; Kofoworola, Oyeshola; Bergerson, Joule A; MacLean, Heather L

    2011-11-01

    A life cycle-based model, GHOST (GreenHouse gas emissions of current Oil Sands Technologies), which quantifies emissions associated with production of diluted bitumen and synthetic crude oil (SCO) is developed. GHOST has the potential to analyze a large set of process configurations, is based on confidential oil sands project operating data, and reports ranges of resulting emissions, improvements over prior studies, which primarily included a limited set of indirect activities, utilized theoretical design data, and reported point estimates. GHOST is demonstrated through application to a major oil sands process, steam-assisted gravity drainage (SAGD). The variability in potential performance of SAGD technologies results in wide ranges of "well-to-refinery entrance gate" emissions (comprising direct and indirect emissions): 18-41 g CO(2)eq/MJ SCO, 9-18 g CO(2)eq/MJ dilbit, and 13-24 g CO(2)eq/MJ synbit. The primary contributor to SAGD's emissions is the combustion of natural gas to produce process steam, making a project's steam-to-oil ratio the most critical parameter in determining GHG performance. The demonstration (a) illustrates that a broad range of technology options, operating conditions, and resulting emissions exist among current oil sands operations, even when considering a single extraction technology, and (b) provides guidance about the feasibility of lowering SAGD project emissions.

  17. Shining a light on oil sands production : spectroscopy could bring flash of insight to ore processing

    Energy Technology Data Exchange (ETDEWEB)

    Zlotnikov, D.

    2010-09-15

    Oil sands are a mixture of silts, sands and clay, and the variability poses challenges to surface mine operators. A professor of Earth and Atmospheric Sciences at the University of Alberta has been working on a spectroscopy project to provide the oil sand industry with real-time ore composition and particle size readings from the mine face. These can then be used to adjust processing conditions at the extraction plant or froth treatment facility, ensuring optimal recovery levels and smooth operation. Developing a spectrographic fingerprint of an ore sample involves shining a very narrow wavelength of light at the sample, recording the intensity of reflected light and repeating the process across a range of wavelengths. The challenges of putting the spectroscopic equipment at the mine site were described. The project is 1 of the more than 20 projects currently at the Centre for Oil Sands Innovation (COSI), a partnership between Imperial Oil and the University of Alberta. Imperial contributed $10 million in funding over the following 5 years, with the governments of Alberta and Canada contributing additional funds. Imperial Oil is not the only beneficiary of COSI research, as all work that comes out of COSI is ultimately published. 1 fig.

  18. POISSON project - I - Emission lines as accretion tracers in Young Stellar Objects: results from observations of Chamaleon I and II sources

    CERN Document Server

    Antoniucci, S; Nisini, B; Giannini, T; Lorenzetti, D; Eisloeffel, J; Bacciotti, F; Cabrit, S; Garatti, A Caratti o; Dougados, C; Ray, T

    2011-01-01

    We present the results of the analysis of LR optical-NIR spectra (0.6-2.4 um) of a sample 47 YSOs in the ChaI and II star-forming clouds. These data are part of the POISSON project (Protostellar Optical-Infrared Spectral Survey on NTT). The aim is to determine the accretion luminosity (Lacc) and mass accretion rate (Macc) of the sources through the analysis of the detected emission features. We also aim at verifying the reliability and consistency of the existing empirical relationships connecting emission line luminosity and Lacc. We employ five tracers (OI-6300A, Ha, CaII-8542A, Pab, and Brg) to derive the accretion luminosity. The tracers provide Lacc values showing different scatters when plotted as a function of L*. The Brg seems the most reliable, since it gives the minimum Lacc dispersion over the entire range of L*, whereas the other tracers provide much more scattered Lacc values, not expected for the homogeneous sample we are observing. The comparison between Lacc(Brg) and Lacc obtained from the oth...

  19. Effectiveness of the Tier 1 Program of Project P.A.T.H.S.: Objective Outcome Evaluation Based on a Randomized Group Trial

    Directory of Open Access Journals (Sweden)

    Daniel T. L. Shek

    2008-01-01

    Full Text Available There are two tiers of programs in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programs. In the Tier 1 Program, teaching units based on different positive youth development constructs are covered. A total of 24 experimental schools (N = 4,121 students and 24 control schools (N = 3,854 students were randomly selected to participate in a randomized group trial. Analyses of covariance and linear mixed models controlling for differences between the two groups in terms of pretest scores, personal variables, and random effects of schools showed that participants in the experimental schools had significantly higher positive youth development levels than did participants in the control schools at post-test based on different indicators derived from the Chinese Positive Youth Development Scale. In conjunction with other evaluation findings reported previously, the present study suggests that the Tier 1 Program of P.A.T.H.S. promotes the positive development of Chinese adolescents in Hong Kong.

  20. The Power of Objectives: Moving beyond Learning Objectives

    Science.gov (United States)

    Phillips, Jack J.; Phillips, Patti P.

    2010-01-01

    Although the need for project objectives is obvious, their value and role are much broader than most think. In this article, we explore the need for higher levels of objectives, along with tips and techniques to develop them properly. More important, we examine the benefits of objectives from many perspectives. In today's competitive environment,…

  1. Bright sand/dark dust: The identification of active sand surfaces on the Earth and Mars

    Science.gov (United States)

    Blount, H. G., II; Greeley, R.; Christensen, P. R.; Arvidson, R.

    1987-05-01

    Field studies and analysis of LANDSAT Thematic Mapper data in the Gran Desierto, Mexico may shed light on a technique to distinguish active from inactive (relict) sand surfaces. Active sand bodies in the study area are consistently brighter (by an average of 20%) at visual and near infrared wavelengths and darker at thermal infrared wavelengths than compositionally similar inactive sands. The reasons for the albedo difference between active and inactive sands are reviewed and the mixing model of Johnson et al. is examined for tracing the provenance of sands based on albedo and spectral variations. Portions of the wavelengths covered by the Mars Orbiter correspond to the Thematic Mapper data. The identification of active sands on Earth, with a priori knowledge of bulk composition and grain size distribution, may allow the remote mapping of active sand surfaces on Mars. In conjuction with thermal infrared remote sensing for composition, it may also provide a method for the remote determination of grain size distributions within sand/silt mixtures.

  2. Simulating and understanding sand wave variation: A case study of the Golden Gate sand waves

    Science.gov (United States)

    Sterlini, F.; Hulscher, S.J.M.H.; Hanes, D.M.

    2009-01-01

    In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the opportunity to study sand wave variation between locations, within one well-measured, large area. The nonlinear model used in this paper is presently the only tool that provides information on the nonlinear evolution of large-amplitude sand waves. The model is used to increase our understanding of the coupling between the variability in environmental conditions and the sand wave characteristics. Results show that the model is able to describe the variation in the Golden Gate sand waves well when both the local oscillating tidal current and the residual current are taken into account. Current and water depth seem to be the most important factors influencing sand wave characteristics. The simulation results give further confidence in the underlying model hypothesis and assumptions. Copyright 2009 by the American Geophysical Union.

  3. MORPHOMETRIC CHARACTERIZATION OF THE SAND FRACTION IN A SAND GRAIN IMAGE CAPTURE SYSTEM1

    Directory of Open Access Journals (Sweden)

    Lucimar Arruda Viana

    Full Text Available ABSTRACT Morphology studies assume significant importance in analysis of phenomena of granular systems packaging, in particular with a view to the use of the technique of soil stabilization named particle size correction in forest roads. In this context, this study aimed to develop and operationalize a Sand Grain Image Capture System and, hereby, determine the morphological indices of the sand fractions of two sandy soils called João Pinheiro (JP and Cachoeira da Prata (CP. Soil samples, air-dried, were sieved (2.0 mm nominal mesh size for removal of gravels. The materials that passed through the sieve were subjected to dispersion, washing in 0.053 mm nominal mesh size sieve, removal of organic matter and iron oxides to obtain the clean sand fractions. Subsequently, each soil sample was sieved for separation into twelve classes, between the diameters of 0.149 mm and 1.190 mm, using a Rotap shaker. Next, tests were carried out to characterize the morphometric attributes of the twelve classes of sand fractions of the soils studied. For validation of the performance of the Sand Grain Image Capture System, the results were compared to those obtained using a standard procedure for image analysis. The analysis of the results led to the following conclusions: (i the sand fraction of the JP soil presented higher values for the morphometric indices roundness, elongation and compactness compared to sand fraction of the CP soil; and (ii the Sand Grain Image Capture System worked properly, with practicality.

  4. Probability of rebound and eject of sand particles in wind-blown sand movement

    Institute of Scientific and Technical Information of China (English)

    Li Xie; Xiaojing Zheng

    2007-01-01

    When incident particles impact into a sand bed in wind-blown sand movement, rebound of the incident particles and eject of the sand particles by the incident particles affect directly the development of wind sand flux. In order to obtain rebound and eject lift-off probability of the sand particles, we apply the particle-bed stochastic collision model presented in our pervious works to derive analytic solutions of velocities of the incident and impacted particles in the postcollision bed. In order to describe randomness inherent in the real particle-bed collision, we take the incident angle, theimpact position and the direction of resultant action of sand particles in sand bed on the impacted sand particle as random variables, and calculate the rebound and eject velocities,angles and coefficients (ratio of rebound and eject velocity to incident velocity). Numerical results are found in accordance with current experimental results. The rebound and eject lift-off probabilities versus the incident and creeping velocities are predicted.

  5. Pretreatment of turkey fat-containing wastewater in coarse sand and gravel/coarse sand bioreactors.

    Science.gov (United States)

    Gaur, Rashmi Singh; Cai, Ling; Tuovinen, Olli H; Mancl, Karen M

    2010-02-01

    Fat, oil and grease in wastewater can be difficult to treat because of their slow decomposition. Traditional pretreatment facilities to remove fat, oil and grease from wastewater are increasingly costly. The hypothesis in this study was that pretreatment of animal fat-containing wastewater in sand and sand/gravel filters facilitates the conversion of slowly degradable organic matter measured as the difference between chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD(5)) for subsequent biological treatment. The pretreatment was evaluated using simulated turkey-processing wastewater and coarse sand and sand/gravel filters at a constant hydraulic loading rate of 132L/m(2)/day. Two types of fixed media reactors were employed: (i) one set with a varying depth of coarse sand, and (ii) the second was similar but with an additional pea gravel cap. The results indicated that the relative removal of COD was slightly improved in the sand bioreactors with a pea gravel cap irrespective of the depth of coarse sand, but partial conversion to BOD(5) was not consistently demonstrated. Pea gravel may act as a sieve to entrap organic matter including fat globules from the wastewater. Multiple dosing at the same daily loading rate slightly improved the treatment efficiency of the sand bioreactors. The ratios of influent-COD/effluent-COD were always greater than 1.0 following a change in the dosing frequency after a rest period, suggesting that organic matter, specifically fat globules in this case, was retained by the column matrix.

  6. [Treatment in psychiatric day hospital in comparison with inpatient wards in different European health care systems--objectives of EDEN project].

    Science.gov (United States)

    Kiejna, Andrzej; Kallert, Thomas W; Rymaszewska, Joanna

    2002-01-01

    The paper presents the objectives and design of an ongoing multicenter randomized, controlled trial EDEN (European Day Hospital EvaluatioN). The EDEN-study aims to evaluate the efficacy of acute psychiatric treatment in a day hospital setting in five European centres: Dresden, London, Michalovce, Prague and Wroclaw. The main hypothesis is that day hospital treatment for acute psychiatric patients is as effective as conventional inpatient hospital care. The objectives of the study are to evaluate the viability and effectiveness of day hospitals for acute psychiatric treatment, to identify subgroups of patients with a more or less favourable outcome so that the treatment setting might be specifically applied and to ascertain the cost-effectiveness of day hospital treatment compared to conventional inpatient treatment. The study utilises a Randomised Controlled Trial (RCT) design with repeated measures at a maximum of six time points: at admission (t1), one week after admission (t2), four weeks after admission (t3), discharge (t4), three months after discharge (t5), and 12 months after discharge (t6). A combination of well-established standardised assessment instruments and open questions is used in 6 time periods. If the findings accept the main hypothesis of the study, some practical consequences could be inevitable: at a mental health policy level, these results could lead to an increase in the capacity of day hospitals; at the clinical level clinicians could redefine their concepts of care to consider the day hospital as an alternative to conventional inpatient treatment; from economic point of view could lead to reduction of treatment costs.

  7. Beginning Objective-C

    CERN Document Server

    Dovey, James

    2012-01-01

    Objective-C is today's fastest growing programming language, at least in part due to the popularity of Apple's Mac, iPhone and iPad. Beginning Objective-C is for you if you have some programming experience, but you're new to the Objective-C programming language and you want a modern-and fast-way forwards to your own coding projects. Beginning Objective-C offers you a modern programmer's perspective on Objective-C courtesy of two of the best iOS and Mac developers in the field today, and gets you programming to the best of your ability in this important language.  It gets you rolling fast into

  8. Western Gas Sands Project Quarterly Basin Activities Report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-04-30

    This quarterly basin activities report is a summation of three months drilling and testing activities in the Greater Green River Basin, Northern Great Plains Province, Piceance Basin, and Uinta Basin. Detailed information is given for each study area for the first quarter of 1979.

  9. Western Gas Sands Project. Quarterly Basin Activities Report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-01-31

    This report is a summation of 3 months' drilling and testing activities in the four primary WGSP study areas: Greater Green River Basin, Northern Great Plains Province, Piceance Basin, and Uinta Basin. The monitoring of basin activities is part of resource assessment. (DLC)

  10. Ace Project as a Project Management Tool

    Science.gov (United States)

    Cline, Melinda; Guynes, Carl S.; Simard, Karine

    2010-01-01

    The primary challenge of project management is to achieve the project goals and objectives while adhering to project constraints--usually scope, quality, time and budget. The secondary challenge is to optimize the allocation and integration of resources necessary to meet pre-defined objectives. Project management software provides an active…

  11. Objective becoming

    CERN Document Server

    Skow, Bradford

    2015-01-01

    Bradford Skow presents an original defense of the 'block universe' theory of time, often said to be a theory according to which time does not pass. Along the way, he provides in-depth discussions of alternative theories of time, including those in which there is 'robust passage' of time or 'objective becoming': presentism, the moving spotlight theory of time, the growing block theory of time, and the 'branching time' theory of time. Skow explains why the moving spotlight theory is the best of these arguments, and rebuts several popular arguments against the thesis that time passes. He surveys the problems that the special theory of relativity has been thought to raise for objective becoming, and suggests ways in which fans of objective becoming may reconcile their view with relativistic physics. The last third of the book aims to clarify and evaluate the argument that we should believe that time passes because, somehow, the passage of time is given to us in experience. He isolates three separate arguments thi...

  12. Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 and Smart Autonomous Sand-Swimming Excavator

    Science.gov (United States)

    Sandy, Michael

    2015-01-01

    The Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 is an excavation robot for mining regolith on a planet like Mars. The robot is programmed using the Robotic Operating System (ROS) and it also uses a physical simulation program called Gazebo. This internship focused on various functions of the program in order to make it a more professional and efficient robot. During the internship another project called the Smart Autonomous Sand-Swimming Excavator was worked on. This is a robot that is designed to dig through sand and extract sample material. The intern worked on programming the Sand-Swimming robot, and designing the electrical system to power and control the robot.

  13. Oil sands operations as a large source of secondary organic aerosols

    Science.gov (United States)

    Liggio, John; Li, Shao-Meng; Hayden, Katherine; Taha, Youssef M.; Stroud, Craig; Darlington, Andrea; Drollette, Brian D.; Gordon, Mark; Lee, Patrick; Liu, Peter; Leithead, Amy; Moussa, Samar G.; Wang, Danny; O'Brien, Jason; Mittermeier, Richard L.; Brook, Jeffrey R.; Lu, Gang; Staebler, Ralf M.; Han, Yuemei; Tokarek, Travis W.; Osthoff, Hans D.; Makar, Paul A.; Zhang, Junhua; L. Plata, Desiree; Gentner, Drew R.

    2016-06-01

    Worldwide heavy oil and bitumen deposits amount to 9 trillion barrels of oil distributed in over 280 basins around the world, with Canada home to oil sands deposits of 1.7 trillion barrels. The global development of this resource and the increase in oil production from oil sands has caused environmental concerns over the presence of toxic compounds in nearby ecosystems and acid deposition. The contribution of oil sands exploration to secondary organic aerosol formation, an important component of atmospheric particulate matter that affects air quality and climate, remains poorly understood. Here we use data from airborne measurements over the Canadian oil sands, laboratory experiments and a box-model study to provide a quantitative assessment of the magnitude of secondary organic aerosol production from oil sands emissions. We find that the evaporation and atmospheric oxidation of low-volatility organic vapours from the mined oil sands material is directly responsible for the majority of the observed secondary organic aerosol mass. The resultant production rates of 45-84 tonnes per day make the oil sands one of the largest sources of anthropogenic secondary organic aerosols in North America. Heavy oil and bitumen account for over ten per cent of global oil production today, and this figure continues to grow. Our findings suggest that the production of the more viscous crude oils could be a large source of secondary organic aerosols in many production and refining regions worldwide, and that such production should be considered when assessing the environmental impacts of current and planned bitumen and heavy oil extraction projects globally.

  14. Capturing phosphates with iron enhanced sand filtration.

    Science.gov (United States)

    Erickson, Andrew J; Gulliver, John S; Weiss, Peter T

    2012-06-01

    Most treatment practices for urban runoff capture pollutants such as phosphorus by either settling or filtration while dissolved phosphorus, typically as phosphates, is untreated. Dissolved phosphorus, however, represents an average 45% of total phosphorus in stormwater runoff and can be more than 95%. In this study, a new stormwater treatment technology to capture phosphate, called the Minnesota Filter, is introduced. The filter comprises iron filings mixed with sand and is tested for phosphate removal from synthetic stormwater. Results indicate that sand mixed with 5% iron filings captures an average of 88% phosphate for at least 200 m of treated depth, which is significantly greater than a sand filter without iron filings. Neither incorporation of iron filings into a sand filter nor capture of phosphates onto iron filings in column experiments had a significant effect on the hydraulic conductivity of the filter at mixtures of 5% or less iron by weight. Field applications with up to 10.7% iron were operated over 1 year without detrimental effects upon hydraulic conductivity. A model is applied and fit to column studies to predict the field performance of iron-enhanced sand filters. The model predictions are verified through the predicted performance of the filters in removing phosphates in field applications. Practical applications of the technology, both existing and proposed, are presented so stormwater managers can begin implementation.

  15. Cleaning oil sands drilling waste in Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Mikic, N.; Nilsen, C.; Markabi, M. [Mi SWACO, Calgary, AB (Canada)

    2008-07-01

    The waste generated from steam assisted gravity drainage (SAGD) wells is brought to the surface and separated by shale shakers. The waste can include drilling fluids and sand contaminated with bitumen. This paper described a new technology developed to treat waste using the addition of hot water and various mixing and separation technologies to reduce the viscosity of the bitumen and separate it from the sand. The bitumen-contaminated drill cuttings were mixed with hot water to form a slurry that was then separated through the G-force created by a hydrocyclone. A secondary separation was then conducted in an elutriation column to remove residual contaminants from the sand. The flow rate of the process was controlled by the fine solids composition of the cuttings, the temperature of the cleaning process, and the performance of the individual components. Laboratory tests conducted to tests the method showed that the sand particles produced using the method were clean enough to be safely disposed in the environment. A pilot study will be conducted to test the sand cleaning technology at a commercial scale. 6 refs., 3 figs.

  16. Mitigating in situ oil sands carbon costs

    Energy Technology Data Exchange (ETDEWEB)

    Theriault, D.J.; Peterson, J. [Laricina Energy Ltd., Calgary, AB (Canada); Heinrichs, H. [Canadian Chemical Technology Inc., Calgary, AB (Canada)

    2008-10-15

    Carbon capture and sequestration is a complex problem with a variety of dimensions that need to be considered. The political, social, and regulatory pressures are forcing carbon costs on the oil sands industry in an effort to reduce the carbon footprint of oil sands operations. This paper reviewed the political, social, and regulatory pressures and obligations for the in-situ oil sands industry. It presented the views and insights of Laricina Energy on the carbon challenge. It also described the initiatives that Laricina Energy is taking to manage these imperatives and outlined the challenges the industry is facing. The purpose of the paper was to encourage dialogue and collaboration by the oil sands industry. The paper also described the dimensions of the carbon problem and how the industry can contribute to a solution. Last, the paper reviewed the parameters of carbon dioxide or greenhouse gas containment and storage issues. It was concluded that the regulatory and policy requirements need to be clarified so that industry understands the new business landscape as well as the requirements that influence the economics of in-situ oil sands development. 7 refs., 7 figs.

  17. Scientific Objectives of the Gulf of Mexico Gas Hydrate JIP Leg II Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E. (Chevron); Latham, T. (Chevron); McConnell, D. (AOA Geophysics); Frye, M. (Minerals Management Service); Hunt, J. (Minerals Management Service); Shedd, W. (Minerals Management Service); Shelander, D. (Schlumberger); Boswell, R.M. (NETL); Rose, K.K. (NETL); Ruppel, C. (USGS); Hutchinson, D. (USGS); Collett, T. (USGS); Dugan, B. (Rice University); Wood, W. (Naval Research Laboratory)

    2008-05-01

    The Gulf of Mexico Methane Hydrate Joint Industry Project (JIP) has been performing research on marine gas hydrates since 2001 and is sponsored by both the JIP members and the U.S. Department of Energy. In 2005, the JIP drilled the Atwater Valley and Keathley Canyon exploration blocks in the Gulf of Mexico to acquire downhole logs and recover cores in silt- and clay-dominated sediments interpreted to contain gas hydrate based on analysis of existing 3-D seismic data prior to drilling. The new 2007-2009 phase of logging and coring, which is described in this paper, will concentrate on gas hydrate-bearing sands in the Alaminos Canyon, Green Canyon, and Walker Ridge protraction areas. Locations were selected to target higher permeability, coarser-grained lithologies (e.g., sands) that have the potential for hosting high saturations of gas hydrate and to assist the U.S. Minerals Management Service with its assessment of gas hydrate resources in the Gulf of Mexico. This paper discusses the scientific objectives for drilling during the upcoming campaign and presents the results from analyzing existing seismic and well log data as part of the site selection process. Alaminos Canyon 818 has the most complete data set of the selected blocks, with both seismic data and comprehensive downhole log data consistent with the occurrence of gas hydrate-bearing sands. Preliminary analyses suggest that the Frio sandstone just above the base of the gas hydrate stability zone may have up to 80% of the available sediment pore space occupied by gas hydrate. The proposed sites in the Green Canyon and Walker Ridge areas are also interpreted to have gas hydrate-bearing sands near the base of the gas hydrate stability zone, but the choice of specific drill sites is not yet complete. The Green Canyon site coincides with a 4-way closure within a Pleistocene sand unit in an area of strong gas flux just south of the Sigsbee Escarpment. The Walker Ridge site is characterized by a sand

  18. Clean and Secure Energy from Domestic Oil Shale and Oil Sands Resources

    Energy Technology Data Exchange (ETDEWEB)

    Spinti, Jennifer [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Birgenheier, Lauren [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Deo, Milind [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Facelli, Julio [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Hradisky, Michal [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Kelly, Kerry [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Miller, Jan [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); McLennan, John [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Ring, Terry [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Ruple, John [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States); Uchitel, Kirsten [Inst. for Clean and Secure Energy, Salt Lake City, UT (United States)

    2015-09-30

    This report summarizes the significant findings from the Clean and Secure Energy from Domestic Oil Shale and Oil Sands Resources program sponsored by the Department of Energy through the National Energy Technology Laboratory. There were four principle areas of research; Environmental, legal, and policy issues related to development of oil shale and oil sands resources; Economic and environmental assessment of domestic unconventional fuels industry; Basin-scale assessment of conventional and unconventional fuel development impacts; and Liquid fuel production by in situ thermal processing of oil shale Multiple research projects were conducted in each area and the results have been communicated via sponsored conferences, conference presentations, invited talks, interviews with the media, numerous topical reports, journal publications, and a book that summarizes much of the oil shale research relating to Utah’s Uinta Basin. In addition, a repository of materials related to oil shale and oil sands has been created within the University of Utah’s Institutional Repository, including the materials generated during this research program. Below is a listing of all topical and progress reports generated by this project and submitted to the Office of Science and Technical Information (OSTI). A listing of all peer-reviewed publications generated as a result of this project is included at the end of this report; Geomechanical and Fluid Transport Properties 1 (December, 2015); Validation Results for Core-Scale Oil Shale Pyrolysis (February, 2015); and Rates and Mechanisms of Oil Shale Pyrolysis: A Chemical Structure Approach (November, 2014); Policy Issues Associated With Using Simulation to Assess Environmental Impacts (November, 2014); Policy Analysis of the Canadian Oil Sands Experience (September, 2013); V-UQ of Generation 1 Simulator with AMSO Experimental Data (August, 2013); Lands with Wilderness Characteristics, Resource Management Plan Constraints, and Land Exchanges

  19. Radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem

    Energy Technology Data Exchange (ETDEWEB)

    Wood, M.D., E-mail: mwood@liv.ac.uk [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside, L69 3GP (United Kingdom); Leah, R.T. [Institute for Sustainable Water Integrated Management and Ecosystem Research (SWIMMER)/School of Biological Sciences, Nicholson Building, University of Liverpool, Liverpool, Merseyside, L69 3GP (United Kingdom); Jones, S.R. [Westlakes Scientific Consulting Ltd., The Princess Royal Building, Westlakes Science and Technology Park, Moor Row, Cumbria, CA24 3LN (United Kingdom); Copplestone, D. [Environment Agency, PO Box 12, Richard Fairclough House, Knutsford Road, Latchford, Warrington, Cheshire, WA4 1HG (United Kingdom)

    2009-06-15

    International intercomparisons of models to assess the impact of ionising radiation on wildlife have identified radionuclide transfer assumptions as a significant source of uncertainty in the modelling process. There is a need to improve the underpinning data sets on radionuclide transfer to reduce this uncertainty, especially for poorly-studied ecosystems such as coastal sand dunes. This paper presents the results of the first published study of radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem. Activity concentrations of {sup 137}Cs, {sup 238}Pu, {sup 239+240}Pu and {sup 241}Am are reported for detritivorous, herbivorous, carnivorous and omnivorous biota. Differences in activity concentrations measured in the sand dune biota are related to the trophic level of the organisms and the influence of sea-to-land transfer is apparent in the food chain transfer observed at the site. There are notable differences in the concentration ratios (CRs) calculated for the sand dune biota compared to other terrestrial ecosystems, especially for the small mammals which have CRs that are two orders of magnitude lower than the generic terrestrial ecosystem CRs published by the recent EC EURATOM ERICA project. The lower CRs at the sand dunes may be due to the influence of other cations from the marine environment (e.g. K and Na) on the net radionuclide transfer observed, but further research is required to test this hypothesis.

  20. Radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem.

    Science.gov (United States)

    Wood, M D; Leah, R T; Jones, S R; Copplestone, D

    2009-06-15

    International intercomparisons of models to assess the impact of ionising radiation on wildlife have identified radionuclide transfer assumptions as a significant source of uncertainty in the modelling process. There is a need to improve the underpinning data sets on radionuclide transfer to reduce this uncertainty, especially for poorly-studied ecosystems such as coastal sand dunes. This paper presents the results of the first published study of radionuclide transfer to invertebrates and small mammals in a coastal sand dune ecosystem. Activity concentrations of (137)Cs, (238)Pu, (239+240)Pu and (241)Am are reported for detritivorous, herbivorous, carnivorous and omnivorous biota. Differences in activity concentrations measured in the sand dune biota are related to the trophic level of the organisms and the influence of sea-to-land transfer is apparent in the food chain transfer observed at the site. There are notable differences in the concentration ratios (CRs) calculated for the sand dune biota compared to other terrestrial ecosystems, especially for the small mammals which have CRs that are two orders of magnitude lower than the generic terrestrial ecosystem CRs published by the recent EC EURATOM ERICA project. The lower CRs at the sand dunes may be due to the influence of other cations from the marine environment (e.g. K and Na) on the net radionuclide transfer observed, but further research is required to test this hypothesis.

  1. The extraction of bitumen from western oil sands. Annual report, July 1991--July 1992

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1992-08-01

    The University of Utah tar sand research and development program is concerned with research and development on Utah is extensive oil sands deposits. The program has been intended to develop a scientific and technological base required for eventual commercial recovery of the heavy oils from oil sands and processing these oils to produce synthetic crude oil and other products such as asphalt. The overall program is based on mining the oil sand, processing the mined sand to recover the heavy oils and upgrading them to products. Multiple deposits are being investigated since it is believed that a large scale (approximately 20,000 bbl/day) plant would require the use of resources from more than one deposit. The tasks or projects in the program are organized according to the following classification: Recovery technologies which includes thermal recovery methods, water extraction methods, and solvent extraction methods; upgrading and processing technologies which covers hydrotreating, hydrocracking, and hydropyrolysis; solvent extraction; production of specialty products; and environmental aspects of the production and processing technologies. These tasks are covered in this report.

  2. Surviving Objects

    OpenAIRE

    Murjas, Teresa

    2012-01-01

    Surviving Objects (2012) is a devised multi-media practice-as-research performance based on extensive interviews conducted with my elderly mother and recorded on a hand-held device. Our conversations concern her experiences as a child refugee following violent deportation by the Soviet Army from Eastern Poland to Siberia (1941), and her subsequent route, via Persia, to a British-run refugee camp in Northern Rhodesia, where she remained for 6 years before arriving in the UK. In order to aid my...

  3. Properties of Shredded Roof Membrane–Sand Mixture and Its Application as Retaining Wall Backfill under Static and Earthquake Loads

    Directory of Open Access Journals (Sweden)

    Bennett Livingston

    2017-04-01

    Full Text Available About 20 billion square feet of Ethylene Propylene Diene Monomer (EPDM rubber is installed on roofs in the United States and most of them will be reaching the end of their lifespan soon. The purpose of this study is to investigate potential reuses of this rubber in Civil Engineering projects rather than disposing it into landfills. First, laboratory tests were performed on various shredded rubber-sand mixtures to quantify the basic geotechnical engineering properties. The laboratory test results show that the shredded rubber-sand mixture is lightweight with good drainage properties and has shear strength parameters comparable to sand. This indicates that the rubber-sand mixture has potential to be used for retaining wall backfill and many other projects. To assess the economic advantage of using shredded rubber-sand mixtures as a lightweight backfill for retaining walls subjected to static and earthquake loadings, geotechnical designs of a 6 m tall gravity cantilever retaining wall were performed. The computed volume of concrete to build the structural components and volume of backfill material were compared with those of conventional sand backfill. Results show significant reductions in the volume of concrete and backfill material in both static and earthquake loading conditions when the portion of shredded rubber increased in the mixture.

  4. The TOMO-ETNA experiment: an imaging active campaign at Mt. Etna volcano. Context, main objectives, working-plans and involved research projects

    Directory of Open Access Journals (Sweden)

    Jesús M. Ibáñez

    2016-09-01

    Full Text Available The TOMO-ETNA experiment was devised to image of the crust underlying the volcanic edifice and, possibly, its plumbing system by using passive and active refraction/reflection seismic methods. This experiment included activities both on-land and offshore with the main objective of obtaining a new high-resolution seismic tomography to improve the knowledge of the crustal structures existing beneath the Etna volcano and northeast Sicily up to Aeolian Islands. The TOMO ETNA experiment was divided in two phases. The first phase started on June 15, 2014 and finalized on July 24, 2014, with the withdrawal of two removable seismic networks (a Short Period Network and a Broadband network composed by 80 and 20 stations respectively deployed at Etna volcano and surrounding areas. During this first phase the oceanographic research vessel “Sarmiento de Gamboa” and the hydro-oceanographic vessel “Galatea” performed the offshore activities, which includes the deployment of ocean bottom seismometers (OBS, air-gun shooting for Wide Angle Seismic refraction (WAS, Multi-Channel Seismic (MCS reflection surveys, magnetic surveys and ROV (Remotely Operated Vehicle dives. This phase finished with the recovery of the short period seismic network. In the second phase the Broadband seismic network remained operative until October 28, 2014, and the R/V “Aegaeo” performed additional MCS surveys during November 19-27, 2014. Overall, the information deriving from TOMO-ETNA experiment could provide the answer to many uncertainties that have arisen while exploiting the large amount of data provided by the cutting-edge monitoring systems of Etna volcano and seismogenic area of eastern Sicily.

  5. Permeability Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Eastern Scheldt Sand. The permeability is determined by use of a falling head apparatus. Finally the test results are briefly summarised and a relationship between...... void ratio and permeability is established....

  6. Sand Dunes Fixation in Baiji District, Iraq

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This study was carried out at Sand Dunes Stabilization Researches Station in Baiji district (230 ln north of Baghdad, Iraq) to evaluate the effects of local soil conditioners manufactured from oil derivatives and plant residuals on sand dunes fixation as the first step for sand dunes stabilization. The results indicate that the fuel oil has the first place in improving wind erosion parameters in the study area, such as increasing mean weight diameter, dry aggregates percentage, the needed time for complete disaggregation by dry sieving, and decreasing the disaggregation rates. Bitumen emulsion occupies the second place, while the plant residuals occupies the third place and has slight effects on the studied parameters. Effects of conditioners on natural vegetation cover are negative in oil derivatives treatments,while positive in plants residuals treatments.

  7. Thermoluminescent dosimetric properties of Descalvado sand

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, M.I.; Caldas, L.V.E

    2006-07-01

    Sand samples proceeding from Descalvado, Sao Paulo, were studied with regard to their dosimetric properties using the thermoluminescence technique (TL) for high doses. These sand samples present steady physical and chemical characteristics to the end items, and they are used in the glass industry and for casting. The TL curves of the samples were obtained after an irradiation at the Gamma-Cell system ({sup 60} Co), of IPEN. The glow curves present two peaks at 80 C and 220 C approximately. Calibration curves were obtained for doses between 50 Gy and 5 kGy. The results indicate that the sand samples can be used for high-doses dosimetry in several areas of applications of ionizing radiation. (Author)

  8. Development tendencies of moulding and core sands

    Directory of Open Access Journals (Sweden)

    Stanislaw M. Dobosz1

    2011-11-01

    Full Text Available Further development of the technology for making moulding and core sands will be strictly limited by tough requirements due to protection of the natural environment. These tendencies are becoming more and more tense, so that we will reach a point when even processes, that from technological point of view fulfill high requirements of the foundry industry, must be replaced by more ecologically-friendly solutions. Hence, technologies using synthetic resins as binding materials will be limited. This paper presents some predictable development tendencies of moulding and core sands. The increasing role of inorganic substances will be noticed, including silicate binders with significantly improved properties, such as improved knock-out property or higher reclamation strength. Other interesting solutions might also be moulding sands bonded by geo-polymers and phosphate binders or salts and also binders based on degradable biopolymers. These tendencies and the usefulness of these binders are put forward in this paper.

  9. Planet-wide sand motion on mars

    Science.gov (United States)

    Bridges, N.T.; Bourke, M.C.; Geissler, P.E.; Banks, M.E.; Colon, C.; Diniega, S.; Golombek, M.P.; Hansen, C.J.; Mattson, S.; McEwen, A.S.; Mellon, M.T.; Stantzos, N.; Thomson, B.J.

    2012-01-01

    Prior to Mars Reconnaissance Orbiter data, images of Mars showed no direct evidence for dune and ripple motion. This was consistent with climate models and lander measurements indicating that winds of sufficient intensity to mobilize sand were rare in the low-density atmosphere. We show that many sand ripples and dunes across Mars exhibit movement of as much as a few meters per year, demonstrating that Martian sand migrates under current conditions in diverse areas of the planet. Most motion is probably driven by wind gusts that are not resolved in global circulation models. A past climate with a thicker atmosphere is only required to move large ripples that contain coarse grains. ?? 2012 Geological Society of America.

  10. Harmfulness Assessment of Moulding Sands with a Geopolymer Binder and a New Hardener, in An Aspect of the Emission of Substances from the Btex Group

    Directory of Open Access Journals (Sweden)

    Bobrowski A.

    2015-04-01

    Full Text Available The harmfulness assessment of moulding sands with a geopolymer binder and a new hardener, in an aspect of the emission of substances from the BTEX group, was performed. Within the expedience project the new series of hardeners for the inorganic GEOPOL binder was developed. Before the introduction of the new system of moulding sands it was necessary to estimate their influence on the environment. To this aim the gasses emission from moulding sands subjected to the influence of liquid cast iron was tested with regard to the content of the gases from the BTEX group (benzene, toluene, ethylbenzene and xylenes. For the comparison the analogous investigations of the up to now applied moulding sands with the geopolymer binder, were performed. It was found that both systems of moulding sands binding emit similar amounts of gases, as well as similar amounts of substances from the BTEX group. Moulding sands with the GEOPOL binder are much more environmentally friendly than moulding sands with organic binders. The content of the BTEX group substances in gases emitted from moulding sands with the GEOPOL binder was approximately 10-times lower than in case of the moulding sands with organic binders.

  11. Penn Grade Micellar Displacement project. First annual report, June 1975--June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, H.H.; Paynter, W.T.; Midkiff, F.R.; Finalle, L.L.

    1978-03-01

    The main objective of the Penn Grade-ERDA Micellar Displacement Project is to assess and hopefully, demonstrate the feasibility of commercial application of the micellar-polymer process for tertiary oil recovery from a rather large, but relatively ''tight'' section of the Bradford Third Sand. The initial phase of this project involves pertinent core and field injectivity measurements from a freshly drilled well, as a basis for assessing the feasibility of a small demonstration test flood to be performed under Phase II. This report details the work done and results obtained under Phase I (Injectivity Test) completed during the first year of the project. These results, having indicated that the pattern test envisaged under Phase II is indeed feasible, work is now in progress to carry the project to the pattern test phase, in pursuit of project goals.

  12. Undrained Cyclic Behaviour of Dense Frederikshavn Sand

    DEFF Research Database (Denmark)

    Nielsen, Søren Kjær; Ibsen, Lars Bo; Sørensen, Kris Wessel

    2013-01-01

    A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series of undra......A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series...

  13. Sand control systems used in completing wells

    Directory of Open Access Journals (Sweden)

    Gabriel Wittenberger

    2005-12-01

    Full Text Available Expandable Tubular Technology is transforming the face of well completion and construction. This technology provides: a substantially higher hydrocarbon production rates from the reservoir, a reduced well drilling and construction costs, new possibilities for previously unreachable or uneconomic reservoirs, and step a change towards the single diameter well. ESS (Expandable Sand Screen has an unrivalled performance worldwide for delivering a reliable sand control in a wide range of applications. Well costs typically cut by over 20 %, and the productivity increases up to 70 %.

  14. On the Size Distribution of Sand

    DEFF Research Database (Denmark)

    Sørensen, Michael

    2016-01-01

    -distribution, by taking into account that individual grains do not have the same travel time from the source to the deposit. The travel time is assumed to be random so that the wear on the individual grains vary randomly. The model provides an interpretation of the parameters of the NIG-distribution, and relates the mean......A model is presented of the development of the size distribution of sand while it is transported from a source to a deposit. The model provides a possible explanation of the log-hyperbolic shape that is frequently found in unimodal grain size distributions in natural sand deposits, as pointed out...

  15. George Sand [Reseña

    OpenAIRE

    Jack, Belinda; Thomas, Florence

    2002-01-01

    Belinda Jack nos cuenta en ese libro la vida de George Sand (de su verdadero nombre Aurora Dupin), esa mujer libertaria del siglo XIX, lo años de su nacimiento, su infancia, su adolescencia y su vida adulta. Una vida tan llena tanto por sus luchas interiores -Sand es una mujer que desde su adolescencia tratará de romper los fatalismos ligados a la condición de mujer del siglo XIX, un siglo profundamente familista y maternalista- como por su inmensa obra literaria que cuenta más de cincuenta n...

  16. Investigation of Sand-Cement Grouts

    Science.gov (United States)

    1960-09-01

    the sianAS. Ho-4, VVers thia 𔃽pacification ,Jlowi -inI r.ver,4 e ofl 3 :*- cen~t to be retain(v,- on1 the NO,. 1E6 sieve. 3y * :.Oviiq- (1),, sc...325 material as does the traprock or silica sand. This j J: i3 -robably the reason for the difference in the quantity of sand founud pmrnable. The three...deficient in material assing th.e ±,e h DOsieve, Ath the addition of percentages of fŕ. ash was test-ilwped. in the other to-ts in this phase, tne

  17. TURBULENT COHERENT STRUCTURES IN CHANNELS WITH SAND WAVES

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Sand wave bed is one of the typical shape of complicated boundaries in hydraulics and river dynamics, and sand wave motion is the main form of the bed load motion in-rivers, thence the study of turbulent structures over sand waves is of importance both in theory and practice. In this paper turbulent coherent structures over single-and multi-sand waves were studied experimentally, the formulae for the separation length and vortex shedding period of the turbulent flow over single-sand wave were suggested, and the characteristics of turbulent coherent structures over multi-sand waves were also given.

  18. Threshold for sand mobility on Mars calibrated from seasonal variations of sand flux

    Science.gov (United States)

    Ayoub, F.; Avouac, J.-P.; Newman, C. E.; Richardson, M. I.; Lucas, A.; Leprince, S.; Bridges, N. T.

    2014-09-01

    Coupling between surface winds and saltation is a fundamental factor governing geological activity and climate on Mars. Saltation of sand is crucial for both erosion of the surface and dust lifting into the atmosphere. Wind tunnel experiments along with measurements from surface meteorology stations and modelling of wind speeds suggest that winds should only rarely move sand on Mars. However, evidence for currently active dune migration has recently accumulated. Crucially, the frequency of sand-moving events and the implied threshold wind stresses for saltation have remained unknown. Here we present detailed measurements of Nili Patera dune field based on High Resolution Imaging Science Experiment images, demonstrating that sand motion occurs daily throughout much of the year and that the resulting sand flux is strongly seasonal. Analysis of the seasonal sand flux variation suggests an effective threshold for sand motion for application to large-scale model wind fields (1-100 km scale) of τs=0.01±0.0015 N m-2.

  19. Evaluating the oil sands reclamation process: Assessing policy capacity and stakeholder access for government and non-governmental organizations operating in Alberta's oil sands

    Science.gov (United States)

    Patterson, Tyler

    . In an effort to discern the overall status of reclamation in the oil sands this study explores several factors essential to policy capacity: work environment, training, employee attitudes, perceived capacity, policy tools, evidence based work, and networking. Data was collected through key informant interviews with senior policy professionals in government and non-government agencies in Alberta. The following are agencies of interest in this research: Canadian Association of Petroleum Producers (CAPP); Alberta Environment and Sustainable Resource Development (AESRD); Alberta Energy Regulator (AER); Cumulative Environmental Management Association (CEMA); Alberta Environment Monitoring, Evaluation, and Reporting Agency (AEMERA); Wood Buffalo Environmental Association (WBEA). The aim of this research is to explain how and why reclamation policy is conducted in Alberta's oil sands. This will illuminate government capacity, NGO capacity, and the interaction of these two agency typologies. In addition to answering research questions, another goal of this project is to show interpretive analysis of policy capacity can be used to measure and predict policy effectiveness. The oil sands of Alberta will be the focus of this project, however, future projects could focus on any government policy scenario utilizing evidence-based approaches.

  20. Objective thermomechanics

    CERN Document Server

    Fülöp, Tamás

    2015-01-01

    An irreversible thermodynamical theory of solids is presented where the kinematic quantities are defined in an automatically objective way. Namely, auxiliary elements like reference frame, reference time and reference configuration are avoided by formulating the motion of the continuum on spacetime directly, utilizing the Weyl-Matolcsi description of spacetime. This restricts the range of definable kinematic quantities heavily. Solids are distinguished from fluids by possessing not only an instantaneous metric tensor but a relaxed metric, too, that represents the natural geometric structure of the solid. The comparison of the instantaneous metric to the relaxed one is the basis of the definition of the elastic state variable, the elastic deformedness tensor. Thermal expansion is conceived as the temperature dependence of the relaxed metric. As opposed to this reversible type of change, plasticity means an irreversible change in the relaxed metric, and is describable via a plastic change rate tensor. The relat...

  1. Danger in the nursery : impact on birds of tar sands oil development in Canada's boreal forest

    Energy Technology Data Exchange (ETDEWEB)

    Wells, J. [Boreal Songbird Initiative, Seattle, WA (United States); Casey-Lefkowitz, S.; Chavarria, G. [Natural Resources Defense Council, New York, NY (United States); Dyer, S. [Pembina Institute, Drayton Valley, AB (Canada)

    2008-07-01

    This report discussed the impacts of tar sands oil development in Canada's boreal forest. The Canadian boreal forest is one of the world's most important breeding areas for migratory birds, with 1 billion to 3 billion individual birds from at least 300 species known to regularly breed there. Approximately 30 per cent of all shorebirds and 30 per cent of all landbirds that breed in the United States and Canada do so within the boreal. The section of the boreal forest that sits over the tar sands region of Alberta is rapidly being fragmented by oil development. As much as 34 to 66 per cent of the Canadian boreal forest, up to 438 million acres, may no longer be intact. In Alberta, 86 per cent of the boreal forest is no longer considered intact, thus putting valuable bird habitat at risk. This report first provided background information on Canada's boreal forest as North America's nesting bird destination. It then reviewed the dangers created by tar sands operations for boreal birds. It noted that tar sands mining destroys boreal bird habitat; tailings ponds trap birds in oil waste; tar sands drilling fragments bird habitat; tar sands water withdrawals harm wetlands and water habitats; and tar sands toxins weaken and kill boreal birds. The impacts of tar sands pipelines and refineries were also discussed along with global warming impacts on boreal birds and the path forward for habitat protection. It was recommended that Alberta should implement a moratorium on new tar sands lease sales, and that Alberta and Canada should halt project approvals until long-term mitigation strategies and conservation measures are in place. refs., tabs., figs.

  2. 基于多目标优化的大型项目任务分配模型%Large-scale project assignment model based on multi-objective optimization

    Institute of Scientific and Technical Information of China (English)

    刘建生; 孙彦武

    2013-01-01

    The multi-objective, multi-variable, multi-constraint and large combinations of large-scale project assignments make task allocation time -consuming and laborious. In this article, based on multi -objective optimization, two task allocation models of large-scale project using the method of time series analysis and the combination algorithm of greedy algorithm and multi-objective optimization are established. One model sets the most profitable and shorter delay as its goal, and the other sets no-delay and the maximum profit as its goal. A task allocation of large-scale project is determined by using these two models. The simulation results show that these models and the algorithm can reduce the time complexity of large-scale project assignments and deal with the problems of task allocation being time-consuming and laborious.%大型项目任务分配问题的多目标、多变量、多约束、大组合等特点,使得任务分配费时、费力.文中分别以利润最大且延期较短和无延期且利润最大为目标,利用时间序列分析方法,将贪婪算法和多目标优化问题相结合,建立两个基于多目标优化的大型项目任务分配模型.利用两个模型分别确定某大型项目的任务分配方案,仿真结果表明:两个模型和算法均最大限度降低了大型项目任务分配问题的时间复杂度,有效地解决了任务分配费时、费力这一问题.

  3. Regional economic effects of current and proposed management alternatives for Sand Lake National Wildlife Refuge

    Science.gov (United States)

    Koontz, Lynne; Lambert, Heather

    2005-01-01

    The National Wildlife Refuge System Improvement Act of 1997 requires all units of the National Wildlife Refuge System to be managed under a Comprehensive Conservation Plan (CCP). The CCP must describe the desired future conditions of a Refuge and provide long range guidance and management direction to achieve Refuge purposes. Sand Lake National Wildlife Refuge (NWR), located 27 miles northeast of Aberdeen, South Dakota, is in the process of developing a range of management goals, objectives, and strategies for the CCP. The CCP for Sand Lake NWR must contain an analysis of expected effects associated with current and proposed Refuge management strategies.

  4. Do peat amendments to oil sands wet sediments affect Carex aquatilis biomass for reclamation success?

    Science.gov (United States)

    Roy, Marie-Claude; Mollard, Federico P O; Foote, A Lee

    2014-06-15

    The oil sands industries of Alberta (Canada) have reclamation objectives to return the mined landscape to equivalent pre-disturbance land capability. Industrial operators are charged with reclaiming a vast landscape of newly exposed sediments on saline-sodic marine-shales sediments. Incorporated in these sediments are by-products resulting from bitumen extraction (consolidated tailings (CT), tailings-sand (TS), and oil sands processed water (OSPW)). A sedge community dominated by Carex aquatilis was identified as a desirable and representative late-succession community for wet-meadow zones of oil sands-created marshes. However, the physical and chemical conditions, including high salinity and low nutrient content of CT and TS sediments suppress plant growth and performance. We experimentally tested the response of C. aquatilis to amendments with peat-mineral-mix (PM) on oil sand sediments (CT and TS). In a two factorial design experiment, we also tested the effects of OSPW on C. aquatilis. We assessed survival, below- and aboveground biomass, and physiology (chlorophyll a fluorescence). We demonstrated that PM amendments to oil sands sediments significantly increased C. aquatilis survival as well as below and aboveground biomass. The use of OSPW significantly reduced C. aquatilis belowground biomass and affected its physiological performance. Due to its tolerance and performance, we verified that C. aquatilis was a good candidate for use in reclaiming the wet-meadow zones of oil sands-created marshes. Ultimately, amending CT and TS with PM expedited the reclamation of the wetland to a C. aquatilis-community which was similar in gross structure to undisturbed wetlands of the region.

  5. MouldingSandDB – a modern database storing moulding sands properties research results

    Directory of Open Access Journals (Sweden)

    J. Jakubski

    2011-01-01

    Full Text Available The complexity of foundry processes requires the use of modern, advanced IT tools for optimization, storage and analysis of t echnicaldata. Properties of moulding and core sands that are collected in research laboratories, manufacturers, and finally in the foundries, are not in use later on. It seems important to create a database that will allow to use the results stored, along with the possibility of searching according to set criteria, adjusted to casting practice. This paper presents part of the database named „MouldingSandDB”, which allows to collect and search data for synthetic moulding sands.

  6. Real-Time Simulation of Aeolian Sand Movement and Sand Ripple Evolution: A Method Based on the Physics of Blown Sand

    Institute of Scientific and Technical Information of China (English)

    Ning Wang; Bao-Gang Hu

    2012-01-01

    Simulation and visualization of aeolian sand movement and sand ripple evolution are a challenging subject.In this paper,we propose a physically based modeling and simulating method that can be used to synthesize sandy terrain in various patterns.Our method is based on the mechanical behavior of individual sand grains,which are widely studied in the physics of blown sand.We accounted significant mechanisms of sand transportation into the sand model,such as saltation,successive saltation and collapsing,while simplified the vegetation model and wind field model to make the simulation feasible and affordable.We implemented the proposed method on the programming graphics processing unit (GPU) to get real-time simulation and rendering.Finally,we proved that our method can reflect many characteristics of sand ripple evolution through several demonstrations.We also gave several synthesized desert scenes made from the simulated height field to display its significance on application.

  7. SANDS: a service-oriented architecture for clinical decision support in a National Health Information Network.

    Science.gov (United States)

    Wright, Adam; Sittig, Dean F

    2008-12-01

    In this paper, we describe and evaluate a new distributed architecture for clinical decision support called SANDS (Service-oriented Architecture for NHIN Decision Support), which leverages current health information exchange efforts and is based on the principles of a service-oriented architecture. The architecture allows disparate clinical information systems and clinical decision support systems to be seamlessly integrated over a network according to a set of interfaces and protocols described in this paper. The architecture described is fully defined and developed, and six use cases have been developed and tested using a prototype electronic health record which links to one of the existing prototype National Health Information Networks (NHIN): drug interaction checking, syndromic surveillance, diagnostic decision support, inappropriate prescribing in older adults, information at the point of care and a simple personal health record. Some of these use cases utilize existing decision support systems, which are either commercially or freely available at present, and developed outside of the SANDS project, while other use cases are based on decision support systems developed specifically for the project. Open source code for many of these components is available, and an open source reference parser is also available for comparison and testing of other clinical information systems and clinical decision support systems that wish to implement the SANDS architecture. The SANDS architecture for decision support has several significant advantages over other architectures for clinical decision support. The most salient of these are:

  8. Simulation of aeolian sand saltation with rotational motion

    Science.gov (United States)

    Huang, Ning; Wang, Cong; Pan, Xiying

    2010-11-01

    In this work, we propose a theoretical model based on the distribution functions of initial liftoff velocity and angular velocity of sand grains to describe a sand saltation process in which both wind field-sand grain coupling and the Magnus force experienced by saltating sand grains have been incorporated. The computation results showed that the Magnus force had significant effects on sand grain saltation. In particular, when the Magnus force was incorporated, the calculated sand transport fluxes and sand transport rate per unit width were closer to the experimental value than when this force was excluded. The sand transport flux is enhanced because the Magnus force owing to particle rotation causes the particles to have higher and longer trajectories, so the particles can get more speed and energy from the wind, which leads to a larger sand transport flux. In addition, it was found that when taking the Magnus force into account, the probability density of the impact velocity and angular velocity of saltating sand grains followed an exponential distribution and a unimodal asymmetric distribution, respectively. Moreover, the sand energy flux increased with the height above the sand surface until the energy flux reached its maximum and then decreased. Furthermore, the energy flux near the ground surface decreased as the grain diameter increased, but beyond a specific height the energy flux increased with the grain diameter. Finally, for the same sand grain diameter, the energy flux increased with the friction velocity.

  9. Geophysical and Geotechnical Determination of Sand Resources on the Florida Atlantic Continental Shelf: Preliminary Results

    Science.gov (United States)

    Finkl, C. W.; Andrews, J. L.; Suthard, B. C.; Robertson, W.

    2007-12-01

    The State of Florida is committed to maintaining beaches to sustain beach width and protect coastal infrastructure. Nearshore sand resources must be identified and cataloged for potential beach nourishment projects in response to sea-level rise and increased tropical storm activity. Given the vast length of Florida coastline, application of a variety of remote sensing techniques are required for measuring large areas in a short amount of time. The study area encompasses a shelf area of about 2,053,220 ha (20,532 km2) from Miami to the Georgia State line (about 653 km shoreline length) and extends up to 27 km offshore to about the 45 m isobath offshore Jacksonville. The continental shelf along the east coast of the Florida peninsula contains a wide range of seafloor environments that lie above the Florida-Hatteras Slope on the shoreface and inner, middle, and outer shelf floors. This study used Airborne Laser Bathymetry (ALB), 3D digital terrain models based on reformatted NOAA bathymetric data, sidescan sonar, and seismic reflection profiling to map seafloor geomorphological conditions that range from coralline-algal reef systems to drowned karst, submerged paleo shorelines (drowned beach ridge plains), and buried paleo channels. Seatruthing of morphosedimentary features is achieved via jetprobe and vibracore surveys in the study of inter-reefal sand troughs, ebb-tidal deltas, transverse bars, shoals, sand waves, ridges, and banks. Preliminary results, which visualize seafloor topography as color-ramped morphoforms, indicate the presence of sedimentary deposits that may constitute viable sand resources for shore protection in the form of beach renourishment. Use of ALB and reformatted NOAA bathymetric data in the form of 3D terrain models permits classification of submarine landform topologies that was heretofore not possible using isobaths. The combination of multiple remote sensing methods showed the spatial distribution of morphosedimentary features and provided

  10. Uptake of Organic Contaminants by Plants from Oil Sands Fine Tailings

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The objectives of this experiment were to evaluate the performance of different plant species growing in different kinds of oil sands fine tailings,and to estimate the uptake of organic contaminants by plants from the oil sands fine tailings.In general,total hydrocarbon in the plant could be ranked(beginning with the highest)as:unweathered plant 4 tailings (UWT),Freeze-Thawtailings(FT),weathered plant 4 tailings(WT),and consolidated tailings(CT) for the willow,poplar and cattails.For grass,CT amended with tailings sand and muskeg had the highest hydrocarbon level in the field treatment,however,other three kinds of tailings(FT,WT and UWT) had lower but similar to each other hydrocarbon levels.

  11. The impact of raindrops on sand

    NARCIS (Netherlands)

    de Jong, Rianne

    2017-01-01

    When a raindrop hits a sand bed, it leaves behind a small crater with a mixture of liquid and grains located at the center. This event is frequently observed in nature, but when absent, sprinklers may artificially produce these impacting drops to facilitate irrigation. Also in industry, the interact

  12. Cumulative environmental management and the oil sands

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    In response to concerns regarding the cumulative environmental impacts of oil sands development within the Athabasca oil sands deposit, the government of Alberta established a Regional Sustainable Development Strategy (RSDS) to balance development with environmental protection. The environmental issues identified through the RSDS were addressed by the Cumulative Environmental Management Association (CEMA). CEMA's boundary is the Wood Buffalo region of northeastern Alberta. It identifies existing and future environmental effects in the region and proposes recommendations to regulatory bodies for reducing environmental impacts associated with oil sands development. This presentation outlined some of the 55 stakeholder representatives of CEMA, including Alberta government departments associated with resource development, oil sand developers within the region, and Aboriginal communities and First Nations. These stakeholders provide input on sector priorities and agree on environmental thresholds. Established working groups also address technical and scientific research issues identified in the RSDS such as sustainable ecosystems; surface waters; trace metals and air contaminants; nitrogen oxides and sulphur dioxides; and land reclamation. To date, CEMA has submitted more than 50 reports and has made 4 major environmental recommendations for trace metal management, ecosystem management tools, a framework for acid deposition management, and a landscape design checklist. tabs., figs.

  13. LEARNING ABOUT THE OCEANS FROM SAND

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    As a young geophysicist in the 1980s, Rob Holman attended a conference in San Francisco that included a field trip to a beach. Dr Holman, who grew up inland, stared at the ocean, assessing the strengths of the waves. But when he looked around, everyone else was studying the sand.

  14. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a small-scal

  15. Cyclic Triaxial Loading of Cohesionless Silty Sand

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2015-01-01

    To engineer efficient structures offshore, we need to extend our knowledge of soil response. Cyclic loading and high water pressure encountered offshore greatly influence cohesionless soil performance. Silty sand from Frederikshavn wind turbine farm was tested using single diameter height samples...

  16. Galveston Island, Texas, Sand Management Strategies

    Science.gov (United States)

    2016-07-01

    68 Figure 28. Jetty segment used for computation of aeolian sand transport. Background photograph 22 May 2012...113 Figure 68 . Total shoreline change after 50 years for 500,000 yd3 placed every 2 years in different locations...The berm at Ft. Myers, FL, was constructed with dredged material from Matanzas Pass. The dredged material contained greater than 10% fines, which

  17. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…

  18. Sand transport, erosion and granular electrification

    DEFF Research Database (Denmark)

    Merrison, J.P.

    2012-01-01

    The transport of granular materials by wind has a major impact on our environment through sand/soil erosion and the generation and transport of atmospheric dust aerosols. Terrestrially the transport of dust involves billions of tons of material every year, influencing the global climate and impac......The transport of granular materials by wind has a major impact on our environment through sand/soil erosion and the generation and transport of atmospheric dust aerosols. Terrestrially the transport of dust involves billions of tons of material every year, influencing the global climate...... can affect grain transport through the generation of intense electric fields and processes of electrostatic assembly. Importantly the transport of sand is characterized by saltation, which is known to be an active process for erosion and therefore a source for dust and sand formation. Using novel...... erosion simulation techniques the link between grain transport rates and erosion rates has been quantified. Furthermore this can be linked to production rates for dust and has been associated with chemical and mineral alteration through a process of mechanical activation of fractured surfaces. This work...

  19. Sand Waves along the Dutch Coast

    NARCIS (Netherlands)

    Verhagen, H.J.

    1989-01-01

    Sand waves, defined as longshore wave-like movements of the shoreline, measured in a horizontal plane, are described along several stretches of the shoreline of The Netherlands. They have a celerity in the order of 50-200 m/yr, a period of 50- 150 years and an amplitude of 30- 500 m. They are found

  20. Building Whales in Sand and Mind.

    Science.gov (United States)

    Warner, Carolyn

    1980-01-01

    Describes two-week summer workshops on evolution, adaptation, and behavior of whales, conducted for children by Cold Spring Harbor Whaling Museum (New York), and culminating in creation of life-size sand sculptures of whales. Provides selected list of periodicals, teaching materials, identification guides, records, and societies devoted to whales…