WorldWideScience

Sample records for sand-rich submarine fan

  1. The Palaeogene Yamak sand-rich submarine-fan complex, Haymana Basin, Turkey

    Science.gov (United States)

    Gökçen, Sungu L.; Kelling, Gilbert

    1983-03-01

    The Haymana Basin is a constituent trough of the Central Anatolian Basin, which was the site of rapid subsidence and accompanying flysch sedimentation during the late Cretaceous and early Tertiary, following closure of the Vardar Ocean and collapse of the carbonate platform forming its southern border. The Eocene Yamak Formation (maximum thickness, 1210 m) abruptly succeeds fine-grained sediments of the Bahçecik Formation, interpreted as a basin-plain facies. Lutite interbeds from the Yamak yield a bathyal marine microfauna and the Formation is characterised by a high proportion of thick medium to coarse sandstones and pebble-to cobble-rudites of turbidite and mass-flow origin, arranged in thick packets of moderate lateral extent. Many of these sand bodies are channelised, with thinning- and fining-upward sequences in which thick amalgamated sandstones and rudites are prominent. Most of the subordinate thickening- and coarsening-upward sequences are erosively succeeded by channelised bodies. These features indicate that the coarse Yamak sediments were deposited in a sand-rich submarine-fan complex in which the channelised mid-fan was the dominant depositional regime. The lateral and vertical relationships of Yamak facies associations indicate that the individual fans were relatively small, elongate and strongly channelised. They show little evidence of lateral migration or coalescence, but apparently result from superposition of successive low-sinuosity channels with only occasional development of channel-mouth "lobes" (in the sense of Mutti and Ricci-Lucchi, 1972, 1975). Facies distributions and palaeocurrent evidence show that sediment was generally conveyed to south and southeast through the Yamak fan system. However, following a prolonged phase of quiescence on the fan and formation of an extensive blanket of purple muds, the uppermost Yamak is marked by northwards progradation of a new channelised fan system.

  2. Miocene Current-Modified Submarine Fans

    Science.gov (United States)

    Arce Perez, L. E.; Snedden, J.; Fisher, W. L.

    2016-12-01

    In the southwestern Gulf of Mexico, new and newly reprocessed seismic data has revealed a series of large bedforms, with set thicknesses of 130 to 250 meters. These exhibit hummocky, oblique and shingled to parallel seismic clinoform reflections. This seismic package has a paleowater depth of 450 meters. Those shingled seismic reflections in offshore east Mexico are interpreted as contourite drift deposits. These Miocene-age contourites may be related to strong ocean bottom currents that modified submarine fans and transported sediment to the north. Those contourites were identified on older seismic data, but are better imaged and interpreted on this new data. Plans are to map out and investigate the origin and extent of fans and contourites that extends over a large area of the Gulf of Mexico. In the Early Miocene several submarine fans systems were formed by the sediment input related to orogenic activity in Mexico. Submarine fan development persisted into the Middle Miocene due to continued uplift and erosion of the Mexican landmass. Initial, contourites are small and close proximity to the deep-water fan. In the Late Miocene time, contourite drift field reached its maximum extent in the Mexican deepwater area, anchored on its southern end by a submarine mound. This mounded submarine fan is located in the offshore northeast Veracruz and can be linked to increased uplift and erosion of the Trans-Mexican volcanic belt. In the Miocene-Pliocene, the large contourite drift begins to diminish in size and scale and is moribund by the Pliocene, with establishment of oceanic circulation similar to the present day. This research is important to understand more about the Gulf of Mexico and also for the Miocene timeframe that is a key phase in the earth's history. The role of the change in bottom water flow during progressive closure of the equatorial seaway separating North and South America will also be investigated.

  3. Quantitative analysis of the geometry of submarine channels: Implications for the classification of submarine fans

    Science.gov (United States)

    Clark, J. D.; Kenyon, N. H.; Pickering, K. T.

    1992-07-01

    Certain attributes of submarine channels measured from GLORIA sidescan sonar data from 16 different submarine fans indicate similarities with fluviatile systems. Channel width, depth, meander radius and wavelength, sinuosity, and gradient were measured. This approach makes it possible to identify high- sinuosity, low-gradient (e.g., Indus Fan channels) and low-sinuosity, high- gradient (e.g., Porcupine Seabight channels) channel systems as end members. Current classifications of submarine fans relate fan shape to grain size or sediment caliber and therefore are inadequate, principally because the shape of the fan is strongly controlled by the shape of the receiving basin, which in turn is dependent upon parameters such as tectonics and diapirism. Overall fan shape is almost invariably independent of the physics of sediment transport. Rather than fan shape, the geometry and other characteristics of submarine channels and canyons provide a more promising means of differentiating deep- marine turbidite systems.

  4. Process sedimentology of submarine fan deposits - new perspectives

    Science.gov (United States)

    Postma, George

    2017-04-01

    To link submarine fan process sedimentology with sand distribution, sand body architecture, texture and fabric, the field geologist studies sedimentary facies, facies associations (fan elements) and stratigraphy. Facies analysis resides on factual knowledge of modern fan morphodynamics and physical modelling of en-masse sediment transport. Where do we stand after 55 years of submarine research, i.e. the date when the first submarine fan model was launched by Arnold Bouma in 1962? Since that date students of submarine fans have worked on a number of important, recurring questions concerned with facies analysis of submarine successions in outcrop and core: 1. What type of sediment transport produced the beds? 2. What facies can be related to initial flow conditions? 3. What is the significance of grain size jumps and bounding surface hierarchy in beds consisting of crude and spaced stratification (traction carpets)? Do these point to multi flow events or to flow pulsations by one and the same event? 4. What facies associations relate to the basic elements of submarine fans? 5. What are the autogenic and allogenic signatures in submarine fans? Particularly in the last decade, the enormous technical advancement helped to obtain high-quality data from observations of density flows in modern canyons, deep basins and deep-water delta slopes (refs 1,2,3). In combination with both physical (refs 4,5) and numerical modelling (ref 6) these studies broke new ground into our understanding of density flow processes in various submarine environments and have led to new concepts of submarine fan building by super- and subcritical high-density flow (ref 7). Do these new concepts provide better answers to our recurrent questions related to the morphodynamics of submarine fans and prediction of sand body architecture? In discussing this open question, I shall 1. apply the new concepts to a modern and ancient example of a channel-lobe-transition-zone (ref 8); 2. raise the problem of

  5. Is the turbidite facies association scheme valid for interpreting ancient submarine fan environments?

    Science.gov (United States)

    Shanmugam, G.; Damuth, J. E.; Moiola, R. J.

    1985-04-01

    Although turbidite facies reflect only processes of deposition, turbidite facies associations are routinely used to identify ancient submarine-fan subenvironments (e.g., upper fan, channel, lobe, etc.). The assumption that process of deposition also reflects environment of deposition may not be valid for the following reasons: (1) Mutti and Ricci Lucchi's facies association scheme for submarine fans has been developed exclusively from ancient turbidite sequences; however, the true relationship between such turbidite facies associations and related fan subenvironments has not been confirmed from modern fans; (2) individual channel-levee systems of many modern submarine fans are in many cases large enough to contain the entire ancient fan systems on which these facies associations are based; (3) large channel-levee systems comparable to those of modern fans have not been recognized in outcrops. Consequently, the validity of turbidite facies associations for interpreting ancient submarine-fan subenvironments must be considered tenuous until confirmed in modern fans.

  6. Submarine-fan facies associations of the Eocene Butano Sandstone, Santa Cruz mountains, California

    Science.gov (United States)

    Nilsen, Tor H.

    1984-06-01

    The Eocene Butano Sandstone was deposited as a submarine fan in a relatively small, partly restricted basin in a borderland setting. It is possibly as thick as 3000 m and was derived from erosion of nearly Mesozoic granitic and older metamorphic rocks located to the south. Deposition was at lower bathyal to abyssal water depths. The original fan may have been 120-to 160-km long and 80-km wide. Outcrops of submarine-canyon, innerfan, middle-fan, and outer-fan facies associations indicate that the depositional model of Mutti and Ricci Lucchi can be used to describe the Butano Sandstone.

  7. Preliminary considerations on the potential influence of submarine fans on marine delimitation

    Institute of Scientific and Technical Information of China (English)

    QIU Wenxian; JIN Xianglong; SCHOFIELD Clive; LI Mingbi

    2013-01-01

    The complex issues associated with marine delineation for the outer limit of continental shelf and the boundary delimitation have provoked considerable attention among researchers in a variety of academic circles, particularly in the juristic filed and the geo-science field. In the present contribution, we start from an overview of submarine fans, as one of common types of sediment-deposit bodies in the ocean, and ex-plore the related geological features which may be of relevance to the marine delimitation in accordance with the 1982 United Nations Convention on the Law of the Sea. We carry out a comparative assessment of certain significant geological features of submarine fans, using the Bengal fan as an example, which is the biggest submarine fan in the world and represents an important factor in the maritime boundary dispute between the neighboring states currently. The relationship between the special geological bodies and the international principle in the 1982 United Nations Convention can be established by combining geological and juristic analyses. This preliminary observation on the effect of submarine bodies both on the marine entitlement and boundary delimitation indicates that it is important for the international society to appro-priately deal with this problem so that the marine right of any state can be protected.

  8. Submarine fan sedimentation at a convergent margin: the cretaceous mangapokia formation, New Zealand

    Science.gov (United States)

    Barnes, Philip M.

    1988-10-01

    -concentration flows. Rare discontinuous graded bedded sandstones containing common flame structures (Facies 7) interbedded with conglomerate facies represent within-channel turbidites. A lower inner-submarine fan channel-overbank assemblage (Facies Association A), an inner-middle submarine fan channel-lobe assemblage (Facies Association B), and a mid-fan assemblage (Facies Association C) are distinguished. Two large-scale progradational suites of facies reflecting large-scale migration of the inner-fan channel complex are superimposed upon numerous small-scale depositional cycles resulting from lateral migration of numerous braided channels within the inner and mid-fan environments. The volumetrically minor ocean-floor assemblage is restricted to zones of melange. Chemically the basalts are tholeiitic, with trace element concentrations similar to modern ocean-floor basalts. Radiolarian-bearing cherts and coloured argillites are highly oxidised, and chemically similar to some modern oceanic pelagic sediments. The juxtaposition of relatively coherent, strongly folded and tectonically imbricated trench-fill submarine fan sediments and minor ocean-floor material is consistent with contemporaneous sedimentation and accretion at the base of the i inner trench slope in a convergent plate setting. The Mangapokia Formation is interpreted to represent the youngest part of the Torlesse terrane, and hence in southern North Island, Torlesse deposition and concurrent subduction tectonism were probably continuous at least until the middle Cretaceous.

  9. Sedimentology and hydrocarbon habitat of the submarine-fan deposits of the Central Carpathian Paleogene Basin (NE Slovakia)

    Energy Technology Data Exchange (ETDEWEB)

    Sotak, J. [Slovak Academy of Sciences, Banska Bystrica (Slovakia). Geological Institute; Pereszlenyi, M. [VVNP Research Oil Company for Exploration and Production, Bratislava (Slovakia); Marschalko, R.; Starek, D. [Slovak Academy of Sciences, Bratislava (Slovakia). Geological Institute; Milicka, J. [Comenius University, Bratislava (Slovakia). Dept. of Geochemistry

    2001-01-01

    The Central Carpathian Paleogene Basin accommodates a subsiding area of the destructive plate-margin. The basin history comprises marginal faulting and alluvial fan accumulation (E{sub 2}); transgressive onlap by shoreface sediments and carbonate platform deposits (E{sub 2}); glacio-eustatic regression induced by cooling (Terminal Eocene Event); forced regression, tectonic subsidence and growth-fault accumulation of basin-floor and slope fans (E{sub 3}); decelerating subsidence, aggradation and sea-level rising during the mud-rich deposition (O{sub 1}); high-magnitude drop in sea-level (Mid-Oligocene Event), retroarc backstep of depocenters and lowstand accumulation of sand-rich fans and suprafans (O{sub 2}-M{sub 1}); subduction-related shortening and basin inversion along the northern margins affected by backthrusting and transpressional deformation (O{sub 2}-M{sub 1}). The basin-fill sequence has poor (TOC {<=} 0.5%) to fair (TOC < 1.0%) quality of source rocks. Maturity of OM ranges from initial to relic stage of HC generation. Paleogene rock-extracts display a good correlation with scarce trapped oils. 'The presence of solid bitumens and HC-rich fluid inclusions indicates overpressure conditions during HC generation and migration. Potential HC reservoirs can be expected in porous lithologies (scarp breccias), in basement highs and traps related to backthrusting, fault-propagation folding and strike-slip tectonics. (author)

  10. Mesozoic and late tertiary submarine fan sequences and their tectonic significance, Sumba, Indonesia

    Science.gov (United States)

    Von Der Borch, C. C.; Grady, A. E.; Hardjoprawiro, S.; Prasetyo, H.; Hadiwisastra, S.

    1983-12-01

    The Indonesian island of Sumba occupies a critical zone which separates a "normal" subduction complex (Java Trench System) from a continent-island arc collision zone (Banda Arc). Sumba is considered by some authors to be a microcontinental fragment, although in this context its pre-fragmentation origin is uncertain. Detailed studies of the stratigraphy of Sumba, however, throw light on the origin and subsequent geological history of the island and surrounding areas. On available evidence, the oldest outcropping rocks are of Cretaceous age and locally contain a tropical Tethyan marine fauna. They comprise dark-coloured, sometimes carbonaceous and often volcanogenic mudstones, sandstones, gravels and diamictites, pervasively intruded by andesitic and dacitic dykes and locally intruded by granodiorite plutons. These sediments are siliclastic and appear to have had a continental provenance. The Cretaceous rocks in many areas compromise part of a major submarine fan complex which, at least in south-central Sumba, prograded towards the southwest and south. Shallow marine and non-marine Paleogene sediments and volcanic agglomerates lie unconformably above the uplifted, tilted and eroded Cretaceous strata. These are overlain in turn by the widely outcropping Miocene Sumba Formation, an oceanic sequence with island-arc affinities. Accessible outcrops of the Sumba Formation comprise platform carbonates with abundant reef developments in west Sumba, and a major submarine fan—pelagic chalk complex in east Sumba. The fan complex, which extends beneath the southern Savu Sea north of Sumba, is dominated by large-scale slumps, olistostromes and thin- and thick-bedded turbidites. Turbidite sands and gravels invariably are volcaniclastic, containing components derived from a typical inner (volcanic) arc complex. Paleocurrent indicators are difficult to find in the Sumba Formation, thus it is uncertain at this stage whether the volcaniclastic turbidites were derived from the

  11. Submarine-fan facies associations of the Upper Cretaceous and Paleocene Gottero Sandstone, Ligurian Apennines, Italy

    Science.gov (United States)

    Nilsen, Tor H.; Abbate, Ernesto

    1984-06-01

    The Upper Cretaceous and Paleocene Gottero Sandstone was deposited as a small deep-sea fan on ophiolitic crust in a trench-slope basin. It was thrust northeastward as an allochthonous sheet in Early and Middle Cenozoic time. The Gottero, as thick as 1500 m, was probably derived from erosion of Hercynian granites and associated metamorphic rocks in northern Corsica. Outcrops of inner-fan channel, middle-fan channel and interchannel, outer-fan lobe, fan-fringe, and basin-plain facies associations indicate that the depositional model of Mutti and Ricci Lucchi for mixed-sediment deep-sea fans can be used. The original fan had a radius of 30 to 50 km.

  12. Role of sediment supply and relative sea-level on sediment delivery to submarine deltas and fans of the Laurentian Channel (Lower St. Lawrence Estuary, Eastern Canada)

    Science.gov (United States)

    Normandeau, Alexandre; Lajeunesse, Patrick; St-Onge, Guillaume; Francus, Pierre

    2016-04-01

    Series of submarine canyons and channels observed in the Lower St. Lawrence Estuary (LSLE; Eastern Canada) provide an opportunity to analyze in great detail their morphology, spatial distribution and Holocene activity in a relatively shallow (≤300 m) semi-enclosed basin. Four categories of canyons and channels were identified according to their feeding sources: glacially-fed, river-fed, longshore drift-fed and sediment-starved systems. This presentation will focus on the interaction between glacially-fed, river-fed (deltas) and longshore drift-fed systems. Three main types of deposits were identified in sediment core samples and seismic stratigraphy: turbidites, debrites and hyperpycnites. The analysis of high-resolution multibeam data, seismic profiles and sediment cores reveals the differences in timing of these gravity flow deposits related to submarine fan deposition. Submarine fans related to glacial meltwaters were formed during deglaciation, near 11 ka cal BP. Following the retreat of the Laurentide Ice Sheet margin in the LSLE, delta progradation allowed the formation of submarine channels by debris and hyperpycnal flows. A reduction of sediment supply from the rivers and a relative sea-level stabilization by 7 ka cal BP then limited the occurrence of these debris and hyperpycnal flows and favoured erosion of the delta fronts. During delta progradation, longshore drift-fed submarine fans were also formed due to high sediment supply, but continued transferring terrigenous material throughout the Holocene. This continued activity was possible because delta fronts eroded and longshore drift transported sediments to the canyons located at the end of a littoral cell. This study highlights that the variability and timing of sediment deposition in submarine deltas and fans is controlled primarily by variations in sediment supply in a formerly glaciated environment.

  13. Improved recovery from Gulf of Mexico reservoirs. Volume I (of 4): Task 1, conduct research on mud-rich submarine fans. Final report, February 14, 1995--October 13, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Kimbrell, W.C.; Bassiouni, Z.A.; Bourgoyne, A.T.

    1997-01-13

    The objective for this portion of the research involved conducting field studies and laboratory investigations to develop and refine models for mud-rich submarine fan architectures used by seismic analysis and reservoir engineers. These research aspects have been presented in two papers as follows: (1) Bouma, A.H., {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes}; (2) Kirkova, J.T. and Lorenzo, J.M., {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fans Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} The {open_quotes}Review of Fine-Grained Submarine Fans and Turbidite Systems{close_quotes} by Arnold Bouma discusses research targeted toward stimulating an increase in oil and gas recovery by developing new and improved geological understanding. The {open_quotes}Synthetic Seismic Modeling of Measured Submarine Fan Sections, Case Study of the Tanqua Complex, Karoo, South Africa{close_quotes} by J.T. Kirkova and J.M. Lorenso discusses the limitations of verticle resolution and how this affects the interpretation and characterization of submarine fan complexes.

  14. Carbonate cements and grains in submarine fan sandstones—the Cergowa Beds (Oligocene, Carpathians of Poland) recorded by cathodoluminescence

    Science.gov (United States)

    Pszonka, Joanna; Wendorff, Marek

    2017-01-01

    The cathodoluminescence (CL) observations with cold cathode, supplemented by reconnaissance scanning electron microscope analyses, bring new data on petrology, provenance and diagenesis of the Oligocene-age Cergowa sandstones from the Outer Carpathians (SE Poland). The sandstones represent a variety of mass gravity flow sediments deposited on a submarine fan, which now forms a lenticular lithosome—a part of the Menilite Beds-Krosno Beds suite important for the hydrocarbons industry. The most common components of the Cergowa sandstones observed under the CL are carbonates—cement and grains that are mainly represented by lithoclasts. Carbonate cement is represented by five generations: brown (Cb), orange (Co), yellow (Cy), zoned (Cz) and black (Ck). Pore-filling Cb and Co calcite cements are interpreted as genetically related to eo- and mesodiagenetic phases. The mesodiagenetic phase is characterised by randomly distributed relatively large monocrystalline-zoned rhombs of dolomite cement (Cz) and ankerite/ferroan dolomite (Ck). The telodiagenetic phase is represented by pore-filling yellow calcite (Cy) that crystallised under the influence of suboxic meteoric waters. Lithoclasts represent six microfacies of carbonate rocks eroded in the source area, i.e. microbreccia, tectonised immature calcarenite/wacke, microsparite, sparite, biomicrosparite/packstone and dolostone. Pronounced indentations of terrigenous sand grains into intraclasts of packstone/biomicrosparite, coupled with commonly present similar packstone-type matrix, suggest that a significant part of matrix resulted from compaction of soft biomicrosparite grains. Terrigenous grains bound by calcite cement are commonly corroded by acidic diagenetic fluids, and partial or even complete replacement of silicates by calcite and clay minerals is illustrated here by feldspar grains. Substantial carbonate cementation has resulted in both the significant hardness and abrasion resistance of the Cergowa sandstones

  15. Provenance of a large Lower Cretaceous turbidite submarine fan complex on the active Laurasian margin: Central Pontides, northern Turkey

    Science.gov (United States)

    Akdoğan, Remziye; Okay, Aral I.; Sunal, Gürsel; Tari, Gabor; Meinhold, Guido; Kylander-Clark, Andrew R. C.

    2017-02-01

    The Pontides formed the southern active margin of Laurasia during the Mesozoic. They became separated from mainland Laurasia during the Late Cretaceous, with the opening of the Black Sea as an oceanic back-arc basin. During the Early Cretaceous, a large submarine turbidite fan complex developed in the Central Pontides. The turbidites cover an area of 400 km by 90 km with a thickness of more than 2 km. We have investigated the provenance of these turbidites-the Çağlayan Formation-using paleocurrent measurements, U-Pb detrital zircon ages, REE abundances of dated zircons and geochemistry of detrital rutile grains. 1924 paleocurrent measurements from 96 outcrop stations indicate flow direction from northwest to southeast in the eastern part of the Çağlayan Basin and from north-northeast to west-southwest in the western part. 1194 detrital zircon ages from 13 Lower Cretaceous sandstone samples show different patterns in the eastern, central and western parts of the basin. The majority of the U-Pb detrital zircon ages in the eastern part of the basin are Archean and Paleoproterozoic (61% of all zircon ages, 337 grains); rocks of these ages are absent in the Pontides and present in the Ukrainian Shield, which indicates a source north of the Black Sea. In the western part of the basin the majority of the zircons are Carboniferous and Neoproterozoic (68%, 246 grains) implying more local sources within the Pontides. The detrital zircons from the central part show an age spectrum as mixture of zircons from western and eastern parts. Significantly, Jurassic and Early Cretaceous zircons make up less than 2% of the total zircon population, which implies lack of a coeval magmatic arc in the region. This is compatible with the absence of the Lower Cretaceous granites in the Pontides. Thus, although the Çağlayan Basin occupied a fore-arc position above the subduction zone, the arc was missing, probably due to flat subduction, and the basin was largely fed from the Ukrainian

  16. Proto-Pacific-margin source for the Ordovician turbidite submarine fan, Lachlan Orogen, southeast Australia: Geochemical constraints

    Science.gov (United States)

    Offler, R.; Fergusson, C. L.

    2016-04-01

    The Early Palaeozoic proto-Pacific Pacific margin of Gondwana was characterised by a huge turbidite submarine fan with abundant clastic detritus derived from unknown sources within Gondwana. These deposits are widespread in the Lachlan Orogen of southeast Australia and include the Ordovician Adaminaby Group. Here we show that the mudstones and sandstones of the Adaminaby Group have chemical compositions that indicate the detritus in them was derived from a felsic, continental source similar in composition to Post Archean Australian Shales (PAAS). Chondrite normalised REE patterns showing LREE enrichment, flat PAAS normalised patterns and elemental ratios La/Sc, Cr/Th, Cr/V, Th/Sc and Th/U, have been used to support this interpretation. The dominance of quartz, and to a lesser degree plagioclase and biotite in the sandstones, suggests that the source was mainly granodioritic to tonalitic in composition. Th/Yb and Ta/Yb ratios indicate that the source was probably calc-alkaline, continental and shoshonitic. In addition, the presence of detrital muscovite, low-grade metamorphic and felsic volcanic clasts, demonstrates that a low-grade metamorphic terrane and volcanic arc contributed to the detritus observed in the samples. The presence of well-rounded zircons and tourmalines, very high Zr contents, high Zr/Sc and higher Cr/V ratios in some samples particularly in the Shoalhaven River area, indicate that some of the detritus was recycled. SiO2 versus (Al2O3 + K2O + Na2O) plots suggest the source areas experienced conditions varying from humid/semi-humid to semi-arid. Textural features and weathering trends of samples from all locations follow a curved pathway on Al2O3 - (CaO* + Na2O) - K2O (ACNK) diagrams, and indicate that the clays formed from weathering had been K-metasomatised prior to penetrative deformation. Chemical indices of alteration (CIA) reveal that even the freshest sandstones are altered and others are moderately to strongly altered. Discrimination

  17. Shale tectonics and structural deformation on the Amazon submarine fan: preliminaries results; Processo de argilocinese e estruturacao do pacote sedimentar da regiao do leque submarino do Amazonas: resultados preliminares

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Valterlene de; Silva, Cleverson Guizan [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Geociencias. Lab. de Geologia Marinha (LAGEMAR); Reis, Antonio Tadeu dos [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Dept. de Oceanografia

    2004-07-01

    The Amazon Submarine Fan, part of the Amazon Mouth Basin, is strongly affected by shale tectonics. Preliminary analysis of about 9.000 Km of multichannel seismic lines allowed us to map three main structural domains: a proximal extensive province largely dominated by seaward-dipping listric normal faults soling into a decollement level (mobile shale, Neomiocene in age) and associated rollovers; an intermediate rigid gliding province, and a lowermost compressive front, dominated by thrust faults. An important point about gravity tectonics in this area is that the morphology of the base of the mobile level seems to have influenced the development of the structural styles. For instance, listric faults lying at the upslope limit of the extensional province are arranged along a step-like morphology of the decollement level. As well as that, we observed that the gradient of the decollement level is more important on the northwestern portion of the fan, where the distance between the extensive and the compressive province is larger (of about 40 Km) than on the southeastern portion of the fan (about 25 Km large). Then, on the basis of the basal level gradient and the structures disposition we can segment the fan area into two structural compartments: a northwest and a southeast compartment. (author)

  18. 白云凹陷珠江组深水扇砂质碎屑流沉积学特征%Depositional Features of Sandy Debris Flow of Submarine Fan in Zhujiang Formation,Baiyun Sag

    Institute of Scientific and Technical Information of China (English)

    郑荣才; 李云; 戴朝成; 高博禹; 胡晓庆; 王昌勇

    2012-01-01

    珠江口盆地白云凹陷深海水域的珠江组为油气勘探开发新领域,但珠江组厚层块状砂岩储层的成因仍存在很大争议.通过对砂岩储层的物质组分、沉积构造、粒度分布、古地形和古构造背景及地震与测井等资料的综合分析;确定白云凹陷珠江组属于深水扇沉积体系,扇体中广泛发育的厚层块状砂岩为深水扇沉积体系中内—中扇水道的砂质碎屑流沉积充填物.在详细描述砂质碎屑流沉积学特征和识别标志的基础上,确定砂质碎屑流与低位期陆架边缘三角洲前缘砂体与海平面大幅度下降期的某种触发机制作用下发生的重力滑塌和砂崩有关,具备“源-渠-汇”耦合关系的深水扇沉积模式.%The deep-water Zhujiang Formation in Baiyun sag of Pearl River Mouth basin has been a new area for hydrocarbon exploration and development, but there is still much controversy about the genesis of massive sandstone reservoirs. Based on comprehensive analysis of composition, sedimentary structures, grain size distribution, ancient topography as well as seismic and logging data, the Zhujiang Formation was deposited by submarine fan system, and a wide range of thick massive sandstoneswere products of sandy debris flow filling withininner-middle fan channels. According to detailed features and identification signs, the sandy debris flow was related to gravitational slump and sand collapse of sandbodies from the shelf edge delta front triggered by certainmechanism duringsignificant sea-level falling, and then the "Source-Drainage-Sink" coupling model of sandy debris flow deposits in submarine fan was set up.

  19. Lithofacies, biofacies, and ichnoassemblage evolution of a shallow submarine volcaniclastic fan-shelf depositional system (Upper Cretaceous, James Ross Island, Antarctica)

    Science.gov (United States)

    Scasso, R. A.; Olivero, E. B.; Buatois, L. A.

    The Upper Cretaceous (Santonian-Campanian/lower Maastrichtian) Santa Marta Formation on James Ross Island, Antarctica, represents volcaniclastic shallow marine fan and shelf sedimentation adjacent to an active volcanic arc. A combined analysis of sedimentologic, paleoecologic, and ichnologic data allows for the recognition in this unit of six lithofacies associations, eight biofacies, and five trace fossils assemblages. Lithofacies are dominated by fine, massive, tuffaceous rocks; graded, turbidite-like tuffaceous sandstones; carbonaceous mudstones; resedimented conglomerates; coquinas; sandstones; silty sandstones; and minor stromatolite beds. Biofacies are defined by different composition and relative abundance of elements of the benthic fauna, mainly bivalves, gastropods, and serpulids, with minor elements represented by scaphopods, corals, brachiopods, and echinoids. Trace fossil assemblages include the most common elements of the Skolithos and Cruziana ichnofacies. A striking result of the analysis is that lithofacies, biofacies, and trace fossil assemblages form distinct, non-repetitive, vertically successive horizons, with their distribution boundaries roughly coincident. On this basis, seven major facies groups, showing a distinct combination of lithofacies, biofacies, and trace fossils, are distinguished in the Santa Marta Formation. These non-repetitive, vertically stacked facies groups reveal a one-way evolution of the depositional system during a transgressive-regressive cycle, with a new transgression at the top of the unit. The lower facies groups represent shallow marine settings with a very high rate of volcaniclastic sedimentation within subsiding basin. Shallow, volcaniclastic fan systems were probably formed at the base of delta slope and grew rapidly as a consequence of high sedimentary supply in equilibrium with basin subsidence. The upper facies groups probably represent sedimentation within the marine part of the envisaged deltaic system on a

  20. Grain-size characteristics and flow strength in the submarine fan deposits from the Qianhe Oil Field, Ludong depression, Liaoning%辽宁陆东凹陷前河油田水下扇沉积粒度特征及水流强度分析

    Institute of Scientific and Technical Information of China (English)

    雷霄雨

    2015-01-01

    The Jiufotang Formation in the Qianhe Oil Field, Ludong depression, Liaoning is built up of a succession of submarine fan deposits generated by the gravity flows and tractional currents during the deposition of the Jiufotang Formation and Shahai Formation. Three sedimentary microfacies have been distinguished, according to lithologic associations and well logs, including the proximal fan, mid-fan front and terminal fan, of which the mid-fan front sandstones turned out to be excellent reservoir rocks because of the discovery of the industrial oil run indicated by the L1 well in the study area.%前河油田九佛堂组为一套水下扇沉积。通过对不同层位取心井粒度资料分析及对比,分析其差异的原因,确定各层位搬运方式及沉积作用形式,并运用霍姆斯水流强度图分析从湖盆边缘向湖盆内的水流强度变化。根据岩性组合及测井曲线特征,识别出扇根、扇中前缘及扇端3种微相。并认为沿水流及砂体发育方向为部署有利区带。

  1. Distal turbidite fan/lobe succession of the Late Oligocene Zuberec Fm. - architecture and hierarchy (Central Western Carpathians, Orava-Podhale basin)

    Science.gov (United States)

    Starek, Dušan; Fuksi, Tomáš

    2017-08-01

    A part of the Upper Oligocene sand-rich turbidite systems of the Central Carpathian Basin is represented by the Zuberec Formation. Sand/mud-mixed deposits of this formation are well exposed in the northern part of the basin, allowing us to interpret the turbidite succession as terminal lobe deposits of a submarine fan. This interpretation is based on the discrimination of three facies associations that are comparable to different components of distributive lobe deposits in deep-water fan systems. They correspond to the lobe off-axis, lobe fringe and lobe distal fringe depositional subenvironments, respectively. The inferences about the depositional paleoenvironment based on sedimentological observations are verified by statistical analyses. The bed-thickness frequency distributions and vertical organization of the facies associations show cyclic trends at different hierarchical levels that enable us to reconstruct architectural elements of a turbidite fan. First, small-scale trends correspond with shift in the lobe element centroid between successive elements. Differences in the distribution and frequency of sandstone bed thicknesses as well as differences in the shape of bed-thickness frequency distributions between individual facies associations reflect a gradual fining and thinning in a down-dip direction. Second, meso-scale trends are identified within lobes and they generally correspond to the significant periodicity identified by the time series analysis of the bed thicknesses. The meso-scale trends demonstrate shifts in the position of the lobe centroid within the lobe system. Both types of trends have a character of a compensational stacking pattern and could be linked to autogenic processes. Third, a largescale trend documented by generally thickening-upward stacking pattern of beds, accompanied by a general increase of the sandstones/mudstones ratio and by a gradual change of percentage of individual facies, could be comparable to lobe-system scale. This

  2. Multi-proxy geochemical analyses of Indus Submarine Fan sediments sampled by IODP Expedition 355: implications for sediment provenance and palaeoclimate reconstructions

    Science.gov (United States)

    Bratenkov, Sophia; George, Simon C.; Bendle, James; Liddy, Hannah; Clift, Peter D.; Pandey, Dhananjai K.; Kulhanek, Denise K.; Andò, Sergio; Tiwari, Manish; Khim, Boo-Keun; Griffith, Elizabeth; Steinke, Stephan; Suzuki, Kenta; Lee, Jongmin; Newton, Kate; Tripathi, Shubham; Expedition 355 Scientific Party

    2016-04-01

    The interplay between the development of the Asian summer monsoon and the growth of mountains in South and Central Asia is perhaps the most compelling example of the relationship between climate and the solid Earth. Understanding this relationship is crucial in the context of understanding past changes and for predicting future impacts in the Monsoon region. Both rapid and gradual mountain uplift influence the surrounding environments and regional climate. The sedimentary record of the Indus Fan offers a unique opportunity to study the climatic changes that occurred in South Asia and their link to the intensity of the erosion during the late Cenozoic. Although some paleoclimate reconstructions in the region can be partly addressed by studies onshore, the dominance of erosional processes in such a mountainous region ensures such records are fragmentary and limited in coverage. Thus ocean drilling is the best way to recover long sequences and to test the possible relations among mountain uplift, erosion, sediment deposition and climate (including carbon burial, chemical weathering and CO2 drawdown). The sediments and sedimentary rocks from the Indian continental margin, adjoining the Arabian Sea, were drilled during the International Ocean Discovery Program (IODP) Expedition 355. Drilling operations at Site U1456 penetrated through 1109.4 m of sediment and sedimentary rocks. The oldest sediment recovered at this site is dated to 13.5-17.7 Ma, with about 390 m of mass transport deposit. This study provides a multiproxy approach for palaeoenvironmental reconstructions in the Arabian Sea area. We use a wide variety of organic geochemical data coupled with inorganic chemistry, mineralogy, and isotopic analyses. For direct comparison among various data sets, we divided whole round residue from the interstitial water samples among different laboratories, with each receiving 50-300 g (dry mass). The preliminary results include initial sediment provenance data based on bulk

  3. Submarines against Submarines (Selected Articles),

    Science.gov (United States)

    1979-07-05

    vowels , and after b, b; t 1lse Whre. . ."r. w itten as ! in Russian, transliterate as yL cr . RUSSIAN AND ENGLISH TRIGONOMETRIC FUNCTIONS . 1-1 English...submarines. The assimilation of postwar scientific and technological achieve- ments into submarine construction has greatly enlarged the role and

  4. Submarine hydrodynamics

    CERN Document Server

    Renilson, Martin

    2015-01-01

    This book adopts a practical approach and presents recent research together with applications in real submarine design and operation. Topics covered include hydrostatics, manoeuvring, resistance and propulsion of submarines. The author briefly reviews basic concepts in ship hydrodynamics and goes on to show how they are applied to submarines, including a look at the use of physical model experiments. The issues associated with manoeuvring in both the horizontal and vertical planes are explained, and readers will discover suggested criteria for stability, along with rudder and hydroplane effectiveness. The book includes a section on appendage design which includes information on sail design, different arrangements of bow planes and alternative stern configurations. Other themes explored in this book include hydro-acoustic performance, the components of resistance and the effect of hull shape. Readers will value the author’s applied experience as well as the empirical expressions that are presented for use a...

  5. Submarine Communications .

    Directory of Open Access Journals (Sweden)

    H.B. Singh

    1993-01-01

    Full Text Available Submarines operating in deep water are virtually cut off from the outer world. It becomes very important and essential to convey survivable and critical information to the submarine during the time it operates under water. Conventional means of radio communication do not serve any useful purpose as the higher frequencies get attenuated very sharply in sea water. At VLF band, which is presently being used by most of the world Navies, signal can penetrate only upto 8-10 m of depth. This depth is not sufficient under hostile environment. ELF is another band where listening depth is around 100 m but data rate is very low. This paper summarizes the various means of communication used to send messages to submarine while cruising at various depths. It seems that in the near future blue-green laser is going to be the vital means of sending large information to a submarine operating much deeper (500-700 m with unrestricted speed.

  6. Submarine Atmospheres

    Science.gov (United States)

    1990-07-01

    antimutagenesis. Obviously, as a lot of you know, extracts of many, many vegetables , especially cruciferous vegetables , contain a lot of antimutagenic...accidents, suicides, and hcmocldes) and cancer . The accidental deaths of enlisted veterans were higher among those with history of demotlons or duty...aboard fast-attack submarines. There was clustering of cancer deaths in the year immediately following discharge from the Navy for medical disability

  7. China’s Future Nuclear Submarine Force. Insights from Chinese Writings

    Science.gov (United States)

    2007-01-01

    Dynamics and Electric Boat], [Naval and Merchant Ships] 1 (2005), pp. 58–61. 31. See, for example, [Yi Fan], “ ” [France’s “ Barracuda ” Class...Attack Submarine], [Militang], no. 3 (2005), p. 17; “ ” [The Demonstration of France’s Barracuda -Class Attack Submarine Nears a Conclusion

  8. Distal turbidite fan/lobe succession of the Late Oligocene Zuberec Fm. – architecture and hierarchy (Central Western Carpathians, Orava–Podhale basin

    Directory of Open Access Journals (Sweden)

    Starek Dušan

    2017-08-01

    Full Text Available A part of the Upper Oligocene sand-rich turbidite systems of the Central Carpathian Basin is represented by the Zuberec Formation. Sand/mud-mixed deposits of this formation are well exposed in the northern part of the basin, allowing us to interpret the turbidite succession as terminal lobe deposits of a submarine fan. This interpretation is based on the discrimination of three facies associations that are comparable to different components of distributive lobe deposits in deep-water fan systems. They correspond to the lobe off-axis, lobe fringe and lobe distal fringe depositional subenvironments, respectively. The inferences about the depositional paleoenvironment based on sedimentological observations are verified by statistical analyses. The bed-thickness frequency distributions and vertical organization of the facies associations show cyclic trends at different hierarchical levels that enable us to reconstruct architectural elements of a turbidite fan. First, small-scale trends correspond with shift in the lobe element centroid between successive elements. Differences in the distribution and frequency of sandstone bed thicknesses as well as differences in the shape of bed-thickness frequency distributions between individual facies associations reflect a gradual fining and thinning in a down-dip direction. Second, meso-scale trends are identified within lobes and they generally correspond to the significant periodicity identified by the time series analysis of the bed thicknesses. The meso-scale trends demonstrate shifts in the position of the lobe centroid within the lobe system. Both types of trends have a character of a compensational stacking pattern and could be linked to autogenic processes. Third, a largescale trend documented by generally thickening-upward stacking pattern of beds, accompanied by a general increase of the sandstones/mudstones ratio and by a gradual change of percentage of individual facies, could be comparable to lobe

  9. Submarine Medicine Team

    Data.gov (United States)

    Federal Laboratory Consortium — The Submarine Medicine Team conducts basic and applied research on biomedical aspects of submarine and diving environments. It focuses on ways to optimize the health...

  10. Ky Fan inequalities

    CERN Document Server

    Moslehian, Mohammad Sal

    2011-01-01

    There are several inequalities in the literature carrying the name of Ky Fan. We survey these well-known Ky Fan inequalities and some other significant inequalities generalized by Ky Fan and review some of their recent developments.

  11. Understanding Himalayan erosion and the significance of the Nicobar Fan

    Science.gov (United States)

    McNeill, Lisa C.; Dugan, Brandon; Backman, Jan; Pickering, Kevin T.; Pouderoux, Hugo F. A.; Henstock, Timothy J.; Petronotis, Katerina E.; Carter, Andrew; Chemale, Farid; Milliken, Kitty L.; Kutterolf, Steffen; Mukoyoshi, Hideki; Chen, Wenhuang; Kachovich, Sarah; Mitchison, Freya L.; Bourlange, Sylvain; Colson, Tobias A.; Frederik, Marina C. G.; Guèrin, Gilles; Hamahashi, Mari; House, Brian M.; Hüpers, Andre; Jeppson, Tamara N.; Kenigsberg, Abby R.; Kuranaga, Mebae; Nair, Nisha; Owari, Satoko; Shan, Yehua; Song, Insun; Torres, Marta E.; Vannucchi, Paola; Vrolijk, Peter J.; Yang, Tao; Zhao, Xixi; Thomas, Ellen

    2017-10-01

    A holistic view of the Bengal-Nicobar Fan system requires sampling the full sedimentary section of the Nicobar Fan, which was achieved for the first time by International Ocean Discovery Program (IODP) Expedition 362 west of North Sumatra. We identified a distinct rise in sediment accumulation rate (SAR) beginning ∼9.5 Ma and reaching 250-350 m/Myr in the 9.5-2 Ma interval, which equal or far exceed rates on the Bengal Fan at similar latitudes. This marked rise in SAR and a constant Himalayan-derived provenance necessitates a major restructuring of sediment routing in the Bengal-Nicobar submarine fan. This coincides with the inversion of the Eastern Himalayan Shillong Plateau and encroachment of the west-propagating Indo-Burmese wedge, which reduced continental accommodation space and increased sediment supply directly to the fan. Our results challenge a commonly held view that changes in sediment flux seen in the Bengal-Nicobar submarine fan were caused by discrete tectonic or climatic events acting on the Himalayan-Tibetan Plateau. Instead, an interplay of tectonic and climatic processes caused the fan system to develop by punctuated changes rather than gradual progradation.

  12. Using Synthetic Aperture Radar data of terrestrial analogs to test for alluvial fan formation mechanisms on Titan

    Science.gov (United States)

    Cartwright, R. J.; Burr, D. M.

    2017-03-01

    Landforms on Titan include features hypothesized to be alluvial fans. Terrestrial alluvial fans form via two processes: fluid-gravity flows (sheetfloods) and sediment-gravity flows (debris flows). Along the Panamint Mountain Range in Death Valley, California, USA, seven fans formed primarily by debris flows are located adjacent to seven fans formed primarily by sheetfloods. The causal difference between these two groupings stems from their catchment lithologies; the debris flow fan catchments are clay-rich and relatively sand-poor, and the sheetflood fan catchments are clay-poor and sand-rich. On Titan, the low and mid latitudes are dominated by sand seas, demonstrating that sand is available for transport. At high latitudes, these sand seas are absent, suggesting that transportable sand is scarce. Based on the sedimentology of the two Panamint Range fan types, we hypothesize that possible fans at lower latitudes on Titan are formed by sheetfloods, whereas those at higher latitudes formed primarily by debris flows. To test these hypotheses, we measured and analyzed the mean normalized radar cross sections (σ°) and changes in σ° with downfan distance for debris flow and sheetflood fans along the Panamint Range. We then compared the results with the same measurements for possible fans on Titan. We find that, in the Panamint Range, debris flow fans are brighter than sheetflood fans and have greater change in σ° with downfan distance, and that on Titan, low-latitude possible fans are likewise brighter than the fans at high latitudes with greater change in σ° with downfan distance. Consequently, our findings suggest that low-latitude possible fans on Titan are formed primarily by debris flows, whereas high-latitude possible fans on Titan are formed primarily by sheetfloods. Thus, our results do not support our hypotheses. Scenarios to explain these results include: (1) high-latitude possible fans are dominated by radar-dark debris flow deposits, (2) low- and mid

  13. Controls on plan-form evolution of submarine channels

    Science.gov (United States)

    Imran, J.; Mohrig, D. C.

    2014-12-01

    Vertically aggrading sinuous channels constitute a basic building block of modern submarine fans and the greater continental slope. Interpretation of seismically imaged channels reveals a significant diversity in internal architecture, as well as important similarities and differences in the evolution of submarine channels relative to better studied rivers. Many submarine channel cross sections possess a 'gull wing' shape. Successive stacking of such channels demonstrates that systematic bank erosion is not required in order for lateral migration to occur. The lateral shift of such aggrading channels, however, is expected to be much less dynamic than in the case of terrestrial rivers. Recent high-resolution 3D seismic data from offshore Angola and an upstream segment of the Bengal Submarine Fan show intensely meandering channels that experience considerable lateral shifting during periods of active migration within submarine valleys. The cross sections of the actively migrating channels are similar to meandering river channels characterized by an outer cut-bank and inner-bank accretion. In submarine channels, the orientation of the secondary flow can be river-like or river-reverse depending on the channel gradient, cross sectional shape, and the adaptation length of the channel bend. In river channels, a single circulation cell commonly occupies the entire channel relief, redistributing the bed-load sediment across the channel, and influencing the thread of high velocity and thus the plan-form evolution of the channel. In submarine environments, the height of the circulation cell will be significantly smaller than channel relief, thus leading to development of lower relief point bars from bed-load transport. Nevertheless these "underfit" bars may play an important role in plan-form evolution of submarine channels. In rivers and submarine channels, the inclined surface accretion can be constructed via pure bed-load, suspended-load, or a combination of both transport

  14. Composite fan stator assembly

    Energy Technology Data Exchange (ETDEWEB)

    Donges, G.L.

    1993-07-13

    A composite fan stator assembly is described for a gas turbine engine having at least two fan rotor stages, the composite stator assembly comprising: an annular composite fan case assembly including an access port, the fan case assembly circumferentially disposed around first and second fan rotor stage locations, a composite fan stator stage supported by and extending radially inward of the fan case assembly and axially disposed between the two fan rotor stage locations, the fan stator stage includes at least one removable vane segment accessible for removal through the access port for assembly and reassembly, the composite fan case assembly including a separable composite forward fan case assembly and a separable composite aft fan case assembly spaced axially aft of the forward fan case assembly, the forward fan case assembly being bolted to the aft fan case assembly, wherein the composite fan stator stage is axially and radially trapped and supported by the forward and aft fan case assemblies. A composite stator vane assembly comprising: a composite inner shroud, a composite outer shroud disposed radially outward of the inner shroud, a plurality of vanes disposed between the shrouds, the vanes including a suction side and a pressure side and radially inner and outer roots, the roots extending through platforms of corresponding ones of the inner and outer shrouds, four box-type attachment elements corresponding to curved suction and pressure sides of the inner and outer roots, the box-type attachment elements having two connected legs angled with respect to each other, a first one of the legs extending along, conforming to the curve of, and bonded to a corresponding one of the airfoil root sides, and a second one of the legs extending along and bonded to a composite shroud surface.

  15. Environment in Submarine Compartments

    Directory of Open Access Journals (Sweden)

    Anil K. Shrivastava

    1987-04-01

    Full Text Available The crew operating in the confined environment of a submarine are subjected to discomfort as a result of physiological stress caused by toxic substances which are generated due to engineering, operational and other human activities. The physioiogical problems of men under prolonged confinement in a submarine have been reviewed. Data on air pollutants monitored during 'cruise' and 'at rest' conditions inside a submarine are given. Threshold limit value (TLV of trace substances in the confined environment has been discussed. The merits of air purification and air revitalization systems currently employed for control of air pollution have been brought out.

  16. Submarine neutrino communication

    CERN Document Server

    Huber, Patrick

    2009-01-01

    We discuss the possibility to use a high energy neutrino beam from a muon storage ring to provide one way communication with a submerged submarine. Neutrino interactions produce muons which can be detected either, directly when they pass through the submarine or by their emission of Cerenkov light in sea water, which, in turn, can be exploited with sensitive photo detectors. Due to the very high neutrino flux from a muon storage ring, it is sufficient to mount either detection system directly onto the hull of the submersible. The achievable data transfer rates compare favorable with existing technologies and do allow for a communication at the usual speed and depth of submarines.

  17. Submarine neutrino communication

    Energy Technology Data Exchange (ETDEWEB)

    Huber, Patrick, E-mail: pahuber@vt.ed [Department of Physics, Virginia Tech, Blacksburg, VA 24061 (United States)

    2010-09-06

    We discuss the possibility to use a high energy neutrino beam from a muon storage ring to provide one way communication with a submerged submarine. Neutrino interactions produce muons which can be detected either, directly when they pass through the submarine or by their emission of Cerenkov light in sea water, which, in turn, can be exploited with sensitive photo detectors. Due to the very high neutrino flux from a muon storage ring, it is sufficient to mount either detection system directly onto the hull of the submersible. The achievable data transfer rates compare favorable with existing technologies and do allow for a communication at the usual speed and depth of submarines.

  18. Submarine neutrino communication

    Science.gov (United States)

    Huber, Patrick

    2010-09-01

    We discuss the possibility to use a high energy neutrino beam from a muon storage ring to provide one way communication with a submerged submarine. Neutrino interactions produce muons which can be detected either, directly when they pass through the submarine or by their emission of Cerenkov light in sea water, which, in turn, can be exploited with sensitive photo detectors. Due to the very high neutrino flux from a muon storage ring, it is sufficient to mount either detection system directly onto the hull of the submersible. The achievable data transfer rates compare favorable with existing technologies and do allow for a communication at the usual speed and depth of submarines.

  19. Submarine neutrino communication

    OpenAIRE

    Huber, Patrick

    2009-01-01

    We discuss the possibility to use a high energy neutrino beam from a muon storage ring to provide one way communication with a submerged submarine. Neutrino interactions produce muons which can be detected either, directly when they pass through the submarine or by their emission of Cerenkov light in sea water, which, in turn, can be exploited with sensitive photo detectors. Due to the very high neutrino flux from a muon storage ring, it is sufficient to mount either detection system directly...

  20. Submarine landslide and tsunami hazards offshore southern Alaska: Seismic strengthening versus rapid sedimentation

    Science.gov (United States)

    Sawyer, Derek E.; Reece, Robert S.; Gulick, Sean P. S.; Lenz, Brandi L.

    2017-08-01

    The southern Alaskan offshore margin is prone to submarine landslides and tsunami hazards due to seismically active plate boundaries and extreme sedimentation rates from glacially enhanced mountain erosion. We examine the submarine landslide potential with new shear strength measurements acquired by Integrated Ocean Drilling Program Expedition 341 on the continental slope and Surveyor Fan. These data reveal lower than expected sediment strength. Contrary to other active margins where seismic strengthening enhances slope stability, the high-sedimentation margin offshore southern Alaska behaves like a passive margin from a shear strength perspective. We interpret that seismic strengthening occurs but is offset by high sedimentation rates and overpressure. This conclusion is supported by shear strength outside of the fan that follow an active margin trend. More broadly, seismically active margins with wet-based glaciers are susceptible to submarine landslide hazards because of the combination of high sedimentation rates and earthquake shaking.

  1. Submarine Salt Karst Terrains

    Directory of Open Access Journals (Sweden)

    Nico Augustin

    2016-06-01

    Full Text Available Karst terrains that develop in bodies of rock salt (taken as mainly of halite, NaCl are special not only for developing in one of the most soluble of all rocks, but also for developing in one of the weakest rocks. Salt is so weak that many surface-piercing salt diapirs extrude slow fountains of salt that that gravity spread downslope over deserts on land and over sea floors. Salt fountains in the deserts of Iran are usually so dry that they flow at only a few cm/yr but the few rain storms a decade so soak and weaken them that they surge at dm/day for a few days. We illustrate the only case where the rates at which different parts of one of the many tens of subaerial salt karst terrains in Iran flows downslope constrains the rates at which its subaerial salt karst terrains form. Normal seawater is only 10% saturated in NaCl. It should therefore be sufficiently aggressive to erode karst terrains into exposures of salt on the thousands of known submarine salt extrusions that have flowed or are still flowing over the floors of hundreds of submarine basins worldwide. However, we know of no attempt to constrain the processes that form submarine salt karst terrains on any of these of submarine salt extrusions. As on land, many potential submarine karst terrains are cloaked by clastic and pelagic sediments that are often hundreds of m thick. Nevertheless, detailed geophysical and bathymetric surveys have already mapped likely submarine salt karst terrains in at least the Gulf of Mexico, and the Red Sea. New images of these two areas are offered as clear evidence of submarine salt dissolution due to sinking or rising aggressive fluids. We suggest that repeated 3D surveys of distinctive features (± fixed seismic reflectors of such terrains could measure any downslope salt flow and thus offer an exceptional opportunity to constrain the rates at which submarine salt karst terrains develop. Such rates are of interest to all salt tectonicians and the many

  2. Contact Lenses on Submarines

    Science.gov (United States)

    2014-09-26

    Kinney, J.A.S., Luria , S.M., McKay, C.L., and Ryan, A.P. Vision of submariners. Undersea Biomed. Res. Sub. Suppl.: S163-S173, 1979. 3’. Kinney, J.A.S... Luria , S.M., Ryan, A. P., Schlichting, C.L., and Paulson, H.M. The vision of submariners and National Guardsmen: a longitudinal study. NSMRL...Rep. No. 918, 1980. 4. Socks, J.F. and Luria , S.M. Improvement of vision through the periscope, background and proposed solutions. NSMRL Rep. No

  3. Solar powered headwear fan

    Energy Technology Data Exchange (ETDEWEB)

    Hirsh, G.B.; Volk, S.; Cirrito, W.; Brann, D.

    1987-07-21

    A fan assembly is described. A housing is adapted for resting on an exterior surface of headwear. A fan mounted in the housing at one end of the housing is adapted for forcing air through an opening defined in a forward protuberance of the headwear. Solar cell means are mounted on the housing at another end of the housing opposite to and remote from the one end for powering the fan means and adapted for resting on a crown of the headwear. Vent means are defined by the housing for allowing air to be sucked into the housing and forced out of the housing when the power means drive the fan means. Mounting means are defined by the housing, including hinge means for removably mounting the modular fan assembly on an exterior surface of the headwear. A portion of the housing occupies a substantial distance between the fan means and the solar cell means. Display means are defined by the portion of the housing between the power means and the fan means for displaying of decorative graphic material.

  4. ANS Based Submarine Simulation

    Science.gov (United States)

    1994-08-01

    computer based simulation proraon supplied by Dr. John Ware at Computer Sceinces Corporation (CSC). Thee am two reasons to use simulated data instead...ANS (Artificial Neural System) capable of modeling submarine perfomncie based on full scale data generated using a computer based simulabon program...The Optimized Entropy algorilth enables the solutions to diffcu problems on a desktop computer within an acceptable time frame. Ob6ectve for w

  5. Anti Submarine Warfare Search Models

    Science.gov (United States)

    2016-09-01

    DISTRIBUTION CODE A 13. ABSTRACT (maximum 200 words) Stealth and high endurance make submarines ideally suited to a variety of missions, and finding...INTENTIONALLY LEFT BLANK v ABSTRACT Stealth and high endurance make submarines ideally suited to a variety of missions, and finding ways to detect, track...II. UNIFORM DIRECTION ......................................................................................5 A. NOTATION AND DEFINITIONS

  6. Submarine Landslides: A Multidisciplinary Crossroad

    Science.gov (United States)

    Moscardelli, L. G.

    2014-12-01

    The study of submarine landslides has advanced considerably in the last decade. A multitude of geoscience disciplines, including marine, petroleum and planetary geology, as well as geohazard assessments, are concerned with the study of these units. Oftentimes, researchers working in these fields disseminate their findings within their own communities and a multidisciplinary approach seems to lack. This presentation showcases several case studies in which a broader approach has increased our understanding of submarine landslides in a variety of geologic settings. Three-dimensional seismic data from several continental margins (Trinidad, Brazil, Morocco, Canada, GOM), as well as data from outcrop localities are shown to explore geomorphological complexities associated with submarine landslides. Discussion associated with the characterization and classification of submarine landslides is also part of this work. Topics that will be cover include: 1) how data from conventional oil and gas exploration activities can be used to increase our understanding of the dynamic behavior of submarine landslides, 2) analogies between terrestrial submarine landslides and potential Martian counterparts, 3) impact of submarine landslides in margin construction, as well as their economic significance and 4) the importance of quantifying the morphology of submarine landslides in a systematic fashion.

  7. Submarine Escape Set Test Facilities

    Directory of Open Access Journals (Sweden)

    G.S.N. Murthy

    2009-07-01

    Full Text Available Submarine Escape Set (SES is used by submariners to escape from a sunken submarine. This set caters for breathing needs of the submariner under water, until he reaches the surface. Evaluation of such life-saving equipment is of paramount importance. This paper describes the submarine escape set and various constructional features and schedules of operation of test facilities designed indegenously and which can evaluate the SES. The test facility is divided into two parts: the reducer test facility, and the breathing bag test facility. The equipment has been rigorously tested and accepted by Indian Navy. Two such test facilities have been developed, one of which is installed at INS Satavahana, Visakhapatnam, and are working satisfactorily.

  8. Current submarine atmosphere control technology.

    Science.gov (United States)

    Mazurek, W

    1998-01-01

    Air purification in submarines was introduced towards the end of World War II and was limited to the use of soda lime for the removal of carbon dioxide and oxygen candles for the regeneration of oxygen. The next major advances came with the advent of nuclear-powered submarines. These included the development of regenerative and, sometimes, energy-intensive processes for comprehensive atmosphere revitalization. With the present development of conventional submarines using air-independent propulsion there is a requirement for air purification similar to that of the nuclear-powered submarines but it is constrained by limited power and space. Some progress has been made in the development of new technology and the adoption of air purification equipment used in the nuclear-powered submarines for this application.

  9. Submarine channel evolution linked to rising salt domes, Gulf of Mexico, USA

    Science.gov (United States)

    Carter, Rachel C.; Gani, M. Royhan; Roesler, Toby; Sarwar, Abu K. M.

    2016-08-01

    An examination of halokinetics and channel evolution together in a deepwater system provides an opportunity to investigate how submarine channel morphology is locally affected by rising salt domes. The study area is located in the northern Gulf of Mexico (GOM), directly off the Louisiana continental slope in a prominent salt dome region. The influence of salt growth on submarine channel evolution is relatively understudied, particularly in the GOM. Utilizing high-resolution 3D seismic and well data and seismic geomorphology techniques, a long-lived (~ 3 Myr) Plio-Pleistocene submarine channel system has been investigated to show a relationship between variable phases of salt motion and planform morphology of preserved submarine channels. Our data suggest that local salt motion acts as a driver for submarine channel evolution. During the late Pliocene, when salt moved upward at a relatively fast rate, channels show distinct entrenchment with narrow channel belts and overall less sinuosity. When salt motion slowed down at the beginning of the Pleistocene, channels aggraded rapidly with preserved levees, and moved toward an equilibrium state with the expansion of channel belt widths. As our results indicate, the rate of salt diapirism exerted a first-order control on channel location and morphology and distribution of reservoir-prone units. This study cautions against readily invoking allogenic factors (e.g., sea level and climate) in explaining changes in submarine channel behavior and associated fan sedimentation, particularly in regions with salt tectonics.

  10. Flow splitting modifies the helical motion in submarine channels

    Science.gov (United States)

    Islam, M. Ashraful; Imran, Jasim; Pirmez, Carlos; Cantelli, Alessandro

    2008-11-01

    Intricately meandering channels of various scales constitute a major morphological feature of the submarine slope and fan systems. These channels act as conduits of density-driven gravity underflows and in turn are shaped by these underflows. The relationship between channel curvature and the dynamics of sediment-laden underflows commonly known as turbidity current has been an enigma, and recently, a subject of controversy. This contribution unravels the flow field of turbidity current at submarine channel bends captured from large scale laboratory experiments. The experimental results show that a mildly sloping channel bank greatly enhances the tilt of the turbidity current-ambient water interface, so much so that the current completely separates from the convex or the inside bank. We also show that irrespective of the shape of the channel cross section, two cells of helical flow appear in confined submarine bend flow. The near-bed cell has a circulation pattern similar to that observed in fluvial channels; the other cell has an opposite sense of rotation. If, on the other hand, a portion of the flow detaches from the body of the current and spills to the concave or outside overbank area, the upper circulation cell becomes suppressed by the resulting lateral convection.

  11. Fans af Bruce

    DEFF Research Database (Denmark)

    Vaaben, Nana Katrine

    2007-01-01

    Analysen viser, hvordan det samme ritual under en koncert forener og opdeler de fans, der orienterer sig mod Bruce Springsteen. På den ene side forener ritualet hele publikum i en stor fælles "Intimitet for mange" og på den anden side splitter det dem, fordi det bliver tydeligt, hvem der er de ri...

  12. What a Football Fan

    Institute of Scientific and Technical Information of China (English)

    王保安; 孙鹏

    2004-01-01

    While the football fan was thrilled to be at the Super Bowl, he was disappointed with the location of his seat. Peering across the stadium through his binoculars, he spied an empty seat on the 50-yard line and made his way there.

  13. SCICEX: Submarine Arctic Science Program

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Submarine Arctic Science Program, SCICEX, is a federal interagency collaboration among the operational Navy, research agencies, and the marine research community...

  14. Carbohydrate Metabolism in Submariner Personnel

    Science.gov (United States)

    1983-06-01

    metabolism the Wilkerson Point System, for glucose values, used in conjunction with patterns of insulin response described by Kraft(4) serves as the means...amount of exercise and carbohydrate metabolism characteristics occurred in both submariners and non-submariners. An inverse relationship also seems to...individuals(7). In the present study a significant negative correlation was also found between exercise vs one and two hour postprandial glucose and two hour

  15. Submarine Landslides in Arctic Sedimentation: Canada Basin

    Science.gov (United States)

    Mosher, David C.; Shimeld, John; Hutchinson, Deborah R.; Lebedova-Ivanova, N; Chapman, C.

    2016-01-01

    Canada Basin of the Arctic Ocean is the least studied ocean basin in the World. Marine seismic field programs were conducted over the past 6 years using Canadian and American icebreakers. These expeditions acquired more than 14,000 line-km of multibeam bathymetric and multi-channel seismic reflection data over abyssal plain, continental rise and slope regions of Canada Basin; areas where little or no seismic reflection data existed previously. Canada Basin is a turbidite-filled basin with flat-lying reflections correlateable over 100s of km. For the upper half of the sedimentary succession, evidence of sedimentary processes other than turbidity current deposition is rare. The Canadian Archipelago and Beaufort Sea margins host stacked mass transport deposits from which many of these turbidites appear to derive. The stratigraphic succession of the MacKenzie River fan is dominated by mass transport deposits; one such complex is in excess of 132,000 km2 in area and underlies much of the southern abyssal plain. The modern seafloor is also scarred with escarpments and mass failure deposits; evidence that submarine landsliding is an ongoing process. In its latest phase of development, Canada Basin is geomorphologically confined with stable oceanographic structure, resulting in restricted depositional/reworking processes. The sedimentary record, therefore, underscores the significance of mass-transport processes in providing sediments to oceanic abyssal plains as few other basins are able to do.

  16. Comparative naval architecture analysis of diesel submarines

    OpenAIRE

    Torkelson, Kai Oscar

    2005-01-01

    CIVINS Many comparative naval architecture analyses of surface ships have been performed, but few published comparative analyses of submarines exist. Of the several design concept papers, reports and studies that have been written on submarines, no exclusively diesel submarine comparative naval architecture analyses have been published. One possible reason for few submarine studies may be the lack of complete and accurate information regarding the naval architecture of foreign diesel subma...

  17. Observational Analysis of Coronal Fans

    Science.gov (United States)

    Talpeanu, D.-C.; Rachmeler, L; Mierla, Marilena

    2017-01-01

    Coronal fans (see Figure 1) are bright observational structures that extend to large distances above the solar surface and can easily be seen in EUV (174 angstrom) above the limb. They have a very long lifetime and can live up to several Carrington rotations (CR), remaining relatively stationary for many months. Note that they are not off-limb manifestation of similarly-named active region fans. The solar conditions required to create coronal fans are not well understood. The goal of this research was to find as many associations as possible of coronal fans with other solar features and to gain a better understanding of these structures. Therefore, we analyzed many fans and created an overview of their properties. We present the results of this statistical analysis and also a case study on the longest living fan.

  18. Fan Cart: The Next Generation

    Science.gov (United States)

    Lamore, Brian

    2016-10-01

    For years the fan cart has provided physics students with an excellent resource for exploring fundamental mechanics concepts such as acceleration, Newton's laws, impulse, momentum, work-energy, and energy conversions. The Physics Teacher has even seen some excellent do-it-yourself (DIY) fan carts and activities. If you are interested in developing the `E' portion of your and your students' STEM (science, technology, engineering, and math) skills, one way to accomplish this is to revisit the DIY fan cart. In this article I share a design of a new edition of the DIY fan cart and some ideas for incorporating the engineering design process into your high school curriculum.

  19. North American Submarine Cable Association (NASCA) Submarine Cables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data show the locations of in-service and out-of-service submarine cables that are owned by members of NASCA and located in U.S. territorial waters. More...

  20. Dynamic and Implications of Football Fans' Club and Fans ...

    African Journals Online (AJOL)

    DrNneka

    Dross (2009) identified football games as one event that has proved potent ... have potential of drawing human attention to participate either as a player or as a ... However, beyond what football fans wears, the fans are sometimes ready to ...

  1. Skífan

    OpenAIRE

    Elín Ólafsdóttir

    2011-01-01

    Skífan er eina fyrirtækið hér á landi sem sérhæfir sig í sölu á tónlist, mynddiskum, tölvuleikjum og leikjatölvum. Sú atvinnugrein sem Skífan tilheyrir hefur fengið að finna töluvert fyrir þróun internetsins þar sem mögulegt er að hlaða þessu efni niður hvort sem er með löglegum eða ólöglegum hætti. Markmið verkefnisins var að skoða hver áhrif sviðsmynda væru á rekstrarlíkan Skífunnar. Höfundur fór í gegnum atvinnuvega- og samkeppnisgreiningu með aðstoð eiganda og rekstrarstjóra Skífunnar...

  2. Fan Cart: The Next Generation

    Science.gov (United States)

    Lamore, Brian

    2016-01-01

    For years the fan cart has provided physics students with an excellent resource for exploring fundamental mechanics concepts such as acceleration, Newton's laws, impulse, momentum, work-energy, and energy conversions. "The Physics Teacher" has even seen some excellent do-it-yourself (DIY) fan carts and activities. If you are interested…

  3. Submarine canyons off Madras Coast

    Digital Repository Service at National Institute of Oceanography (India)

    Setty, M.G.A.P.

    Submarine canyons off the coast of Madras, Tamil Nadu, India were studied during cruise of @iINS Kistna@@ as part of the IIOE programme They consist of hill-like projections and V-shaped valleys Their other features are also reported...

  4. Obstacle avoidance sonar for submarines

    Science.gov (United States)

    Dugas, Albert C.; Webman, Kenneth M.

    2002-05-01

    The Advanced Mine Detection Sonar (AMDS) system was designed to operate in poor environments with high biological and/or shallow-water boundary conditions. It provides increased capability for active detection of volume, close-tethered, and bottom mines, as well as submarine and surface target active/passive detection for ASW and collision avoidance. It also provides bottom topography mapping capability for precise submarine navigation in uncharted littoral waters. It accomplishes this by using advanced processing techniques with extremely narrow beamwidths. The receive array consists of 36 modules arranged in a 15-ft-diameter semicircle at the bottom of the submarine sonar dome to form a chin-mounted array. Each module consists of 40 piezoelectric rubber elements. The modules provide the necessary signal conditioning to the element data prior to signal transmission (uplink) through the hull. The elements are amplified, filtered, converted to digital signals by an A/D converter, and multiplexed prior to uplink to the inboard receiver. Each module also has a downlink over which it receives synchronization and mode/gain control. Uplink and downlink transmission is done using fiberoptic telemetry. AMDS was installed on the USS Asheville. The high-frequency chin array for Virginia class submarines is based on the Asheville design.

  5. Optimisation of Fan Blade Angle

    Directory of Open Access Journals (Sweden)

    Swaroop M P

    2017-01-01

    Full Text Available This report represents the optimization of fan blade angle in accordance with the various room temperatures that can be in the tropical area like India. We took this work mainly because cooling is an important factor now a days in every area where construction and rooms are there and ceiling fans are the most common device that is commonly used. So it is of utmost importance to tweak the performance of this ceiling fan so that it can function in its most optimal condition. We have modeled the fan in a modeling software (SOLIDWORKS and imported that into an analyzing software (ANSYS and a result is generated on the various blade angles (0, 4, 8 and 12.5 degrees in accordance to room conditions. A trend line curve with the obtained data is expected as the result which can be crucial for designing of future fans

  6. Seabed morphology and sedimentary processes on high-gradient trough mouth fans offshore Troms, northern Norway

    Science.gov (United States)

    Rydningen, Tom Arne; Laberg, Jan Sverre; Kolstad, Vidar

    2015-10-01

    Trough mouth fans (TMF) situated at the mouths of formerly glaciated cross-shelf troughs are important paleoclimatic archives. Whereas the sedimentary processes of large, low-gradient TMFs have received considerable interest, little attention has been paid to the other end member of this landform class, i.e. TMFs with higher slope gradients. Detailed swath-bathymetric data and seismic profiles from the continental margin offshore Troms, northern Norway cover three high-gradient TMFs (the Andfjorden, Malangsdjupet and Rebbenesdjupet TMFs; slope gradients generally between 1° and 15°), as well as inter-fan areas, which include two submarine canyons (the Andøya and Senja Canyon) and the Malangsgrunnen inter-fan slope. The present-day morphologies of the Andfjorden and Malangsdjupet TMFs have evolved from sediment transport and distribution through gully-channel complexes. The Andfjorden TMF has later been affected by a large submarine landslide that remobilized much of these complexes. The Rebbenesdjupet TMF is dominated by a number of small and relatively shallow slide scars, which are inferred to be related to small-scale sediment failure of glaciomarine and/or contouritic sediments. The canyons cut into the adjacent TMFs, and turbidity currents originating on the fans widened and deepened the canyons during downslope flow. The Malangsgrunnen shelf break and inter-fan slope acted as a funnel for turbidity currents originating on the upper slope, forming a dendritic pattern of gullies. A conceptual model for the high-gradient TMFs on the Troms margin has been compiled. The main sediment input onto the TMFs has occurred during peak glacials when the Fennoscandian Ice Sheet reached the shelf edge. The overall convex fan form and progradational seismic facies show that these glacigenic deposits were repeatedly distributed onto the fan. On the Andfjorden and Malangsdjupet TMFs, gully-channel complexes occur within such deposits. It is thus inferred that the steep

  7. A history of RPGs: Made by fans; played by fans

    Directory of Open Access Journals (Sweden)

    Paul Mason

    2012-09-01

    Full Text Available I explore some aspects of the early history of tabletop role-playing games (RPGs that are perhaps not well known among media scholars, and which offer an alternative take on the idea of fan activity.

  8. 14 CFR 29.908 - Cooling fans.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Cooling fans. 29.908 Section 29.908... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant General § 29.908 Cooling fans. For cooling fans that are a part of a powerplant installation the following apply: (a) Category A. For cooling fans...

  9. Comparative Naval Architecture Analysis of Diesel Submarines

    Science.gov (United States)

    2005-06-01

    space required to enclose all of the requirements, this volume must be able to support the weight of the submarine. In other words, Archimedes ’ principle ...accurate information regarding the naval architecture of foreign diesel submarines. However, with some fundamental submarine design principles , drawings of...cycling and hiking, I thank you for pushing me to relieve stress through my favorite sports. Last but not least of all, I want to pay tribute to the

  10. Stranger than fiction: Fan identity in cosplay

    Directory of Open Access Journals (Sweden)

    Nicolle Lamerichs

    2011-09-01

    Full Text Available Academic accounts of fan cultures usually focus on creative practices such as fan fiction, fan videos, and fan art. Through these practices, fans, as an active audience, closely interpret existing texts and rework them with texts of their own. A practice scarcely examined is cosplay ("costume play", in which fans produce their own costumes inspired by fictional characters. Cosplay is a form of appropriation that transforms and actualizes an existing story in close connection to the fan community and the fan's own identity. I provide analytical insights into this fan practice, focusing on how it influences the subject. Cosplay is understood as a performative activity and analyzed through Judith Butler's concept of performativity. I specifically focus on boundaries between the body and dress, and on those between reality and fiction. I aim to show that cosplay emphasizes the personal enactment of a narrative, thereby offering new perspectives on fan identity.

  11. Football – Feminisation – Fans

    DEFF Research Database (Denmark)

    Mintert, Svenja-Maria

    the number of female fans in football has grown over the past years. A national sense of community, emotion and passion for the game is in particular reached during the international tournaments at live football spectacles and many female fans cheer and sing for ‘their’ team with the utmost conviction. Yet...... sociological theories. The objective is, first, to develop new knowledge and understanding about the impact of football on gendered identity construction and negotiation – in both the performance and the consumption of football – and how these female fans contribute to a European dialogue, the gender......-specific experience and acting out of fandom, and the intersection between gender and national/European identity. The second objective is to study the role of gender in football and fan cultures with regard to gender-specific patterns of cross-cultural communication and identification. The third objective...

  12. Submarine glaciated landscapes of central and northern British Columbia, Canada

    Science.gov (United States)

    Shaw, John; Lintern, Gwyn

    2015-04-01

    Recent systematic multibeam sonar mapping and ground-truthing surveys in the fjords and coastal waters of central and northern British Columbia, Canada, provide information on glacial processes associated with the Cordilleran Ice Sheet, and also on postglacial processes that have strongly modified the glacial terrain. During the last glacial maximum, ice covered the Coast Range, except for nunataks. Convergent streamlined glacial landforms in the Strait of Georgia testify to a strong flow of ice towards the southeast, between Vancouver Island and the mainland. During ice retreat, thick deposits of acoustically stratified glaciomarine mud were deposited in glacially over deepened basins. Retreat through the Douglas Channel fjord system was punctuated by still stands, resulting in a series of submarine moraines. Postglacial processes have created a suite of landforms that mask the primary glacial terrain: 1) Fjord floors host thick deposits of acoustically transparent postglacial mud with highly variable distribution: banks up to 80-m thick are commonly adjacent to erosional zones with glaciomarine mud exposed at the seafloor; 2) In this region of high precipitation and snowpack melt, numerous cone-shaped Holocene fan deltas developed on the fjord sidewalls transport coarse sediment to the fjord floors. Larger deltas are developed at fjord heads, notably at Kitimat and Kildala; 3) Submarine slope failures in this tectonically active area have resulted in a suite of mass transport deposits on sidewalls and fjord floors. The very large submarine slope failures at Camano Sound and KitKat Inlet occurred on the steep, rear facets of large transverse moraines, and involved the failure of glaciomarine sediment that moved into deeper basins, perhaps as a retrogressive failure. The ages of these events are unknown, although the presence of postglacial mud in the slide scar at Caamano suggests that the event at that location occurred in the late glacial or early Holocene. Also

  13. Submarines, spacecraft and exhaled breath.

    Science.gov (United States)

    Pleil, Joachim D; Hansel, Armin

    2012-03-01

    Foreword The International Association of Breath Research (IABR) meetings are an eclectic gathering of researchers in the medical, environmental and instrumentation fields; our focus is on human health as assessed by the measurement and interpretation of trace chemicals in human exhaled breath. What may have escaped our notice is a complementary field of research that explores the creation and maintenance of artificial atmospheres practised by the submarine air monitoring and air purification (SAMAP) community. SAMAP is comprised of manufacturers, researchers and medical professionals dealing with the engineering and instrumentation to support human life in submarines and spacecraft (including shuttlecraft and manned rockets, high-altitude aircraft, and the International Space Station (ISS)). Here, the immediate concerns are short-term survival and long-term health in fairly confined environments where one cannot simply 'open the window' for fresh air. As such, one of the main concerns is air monitoring and the main sources of contamination are CO(2) and other constituents of human exhaled breath. Since the inaugural meeting in 1994 in Adelaide, Australia, SAMAP meetings have been held every two or three years alternating between the North American and European continents. The meetings are organized by Dr Wally Mazurek (a member of IABR) of the Defense Systems Technology Organization (DSTO) of Australia, and individual meetings are co-hosted by the navies of the countries in which they are held. An overriding focus at SAMAP is life support (oxygen availability and carbon dioxide removal). Certainly, other air constituents are also important; for example, the closed environment of a submarine or the ISS can build up contaminants from consumer products, cooking, refrigeration, accidental fires, propulsion and atmosphere maintenance. However, the most immediate concern is sustaining human metabolism: removing exhaled CO(2) and replacing metabolized O(2). Another

  14. Local scour at submarine pipelines

    Institute of Scientific and Technical Information of China (English)

    Yee-Meng Chiew

    2010-01-01

    The rapid development of offshore oil_fields has increased the number of submarine pipelines being constructed for the transport of crude oil to onshore refineries.Interactions between the pipeline and an erodible bed under the influence of current and waves often lead to local scouring around the structure.When this occurs, the pipeline may be suspended on the seabed resulting in the formation of a span.If the free span is long enough, the pipe may experience resonant flow-induced oscillations,leading to structural failure.This study examines the complex flow-structure-sediment interaction leading to the development of local scour holes around submarine pipelines.It reviews published literature in this area,which primarily is confined to the development of 2-dimensional scour holes.Despite the abundance of such research studies,pipeline-scour in the field essentially is 3-dimensional in nature.Hence, most of these studies have overlooked the importance of the transverse dimension of the scour hole,while emphasizing on its vertical dimension.This dearly is an issue that must be re-examined in light of the potential hazard and environmental disaster that one faces in the event of a pipeline failure.Recent studies have begun to recognize this shortcoming,and attempts have been made to overcome the deficiency.The study presents the state-of-the-art knowledge on local scour at submarine pipelines,both from a 2-dimensional as well as the 3-dimensional perspective.

  15. Primary Initiation of Submarine Canyons

    CERN Document Server

    Herndon, J Marvin

    2011-01-01

    The discovery of close-to-star gas-giant exo-planets lends support to the idea of Earth's origin as a Jupiter-like gas-giant and to the consequences of its compression, including whole-Earth decompression dynamics that gives rise, without requiring mantle convection, to the myriad measurements and observations whose descriptions are attributed to plate tectonics. I propose here another, unanticipated consequence of whole-Earth decompression dynamics: namely, a specific, dominant, non-erosion, underlying initiation-mechanism precursor for submarine canyons that follows as a direct consequence of Earth's early origin as a Jupiter-like gas-giant.

  16. 47 CFR 32.2424 - Submarine & deep sea cable.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Submarine & deep sea cable. 32.2424 Section 32... Submarine & deep sea cable. (a) This account shall include the original cost of submarine cable and deep sea... defined below, are to be maintained for nonmetallic submarine and deep sea cable and metallic...

  17. 32 CFR 700.1058 - Command of a submarine.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a submarine. 700.1058 Section 700... Command Detail to Duty § 700.1058 Command of a submarine. The officer detailed to command a submarine... submarines....

  18. On Some Generalized Ky Fan Minimax Inequalities

    Directory of Open Access Journals (Sweden)

    Luo Xianqiang

    2009-01-01

    Full Text Available Some generalized Ky Fan minimax inequalities for vector-valued mappings are established by applying the classical Browder fixed point theorem and the Kakutani-Fan-Glicksberg fixed point theorem.

  19. Advance Noise Control Fan II: Test Rig Fan Risk Management Study

    Science.gov (United States)

    Lucero, John

    2013-01-01

    Since 1995 the Advanced Noise Control Fan (ANCF) has significantly contributed to the advancement of the understanding of the physics of fan tonal noise generation. The 9'x15' WT has successfully tested multiple high speed fan designs over the last several decades. This advanced several tone noise reduction concepts to higher TRL and the validation of fan tone noise prediction codes.

  20. Online Fan Fiction and Critical Media Literacy

    Science.gov (United States)

    Black, Rebecca W.

    2010-01-01

    This article explores English-language-learning (ELL) youths' engagement with popular media through composing and publicly posting stories in an online fan fiction writing space. Fan fiction is a genre that lends itself to critical engagement with media texts as fans repurpose popular media to design their own narratives. Analyses describe how…

  1. The timing of sediment transport down Monterey Submarine Canyon, offshore California

    Science.gov (United States)

    Stevens, Thomas; Paull, Charles K.; Ussler, William III; McGann, Mary; Buylaert, Jan-Pieter; Lundsten, Eve M

    2013-01-01

    While submarine canyons are the major conduits through which sediments are transported from the continents out into the deep sea, the time it takes for sediment to pass down through a submarine canyon system is poorly constrained. Here we report on the first study to couple optically stimulated luminescence (OSL) ages of quartz sand deposits and accelerator mass spectrometry 14C ages measured on benthic foraminifera to examine the timing of sediment transport through the axial channel of Monterey Submarine Canyon and Fan, offshore California. The OSL ages date the timing of sediment entry into the canyon head while the 14C ages of benthic foraminifera record the deposition of hemipelagic sediments that bound the sand horizons. We use both single-grain and small (∼2 mm area) single-aliquot regeneration approaches on vibracore samples from fining-upward sequences at various water depths to demonstrate relatively rapid, decadal-scale sand transport to at least 1.1 km depth and more variable decadal- to millennial-scale transport to a least 3.5 km depth on the fan. Significant differences between the time sand was last exposed at the canyon head (OSL age) and the timing of deposition of the sand (from 14C ages of benthic foraminifera in bracketing hemipelagic sediments) are interpreted as indicating that the sand does not pass through the entire canyon instantly in large individual events, but rather moves multiple times before emerging onto the fan. The increased spread in single-grain OSL dates with water depth provides evidence of mixing and temporary storage of sediment as it moves through the canyon system. The ages also indicate that the frequency of sediment transport events decreases with distance down the canyon channel system. The amalgamated sands near the canyon head yield OSL ages that are consistent with a sub-decadal recurrence frequency while the fining-upward sand sequences on the fan indicate that the channel is still experiencing events with a 150

  2. Fan/Ram Duct Program

    Science.gov (United States)

    1973-10-01

    mwm^mmmt c INPUT I ] H—f TRANSIENT ROUTINE P"" CONTROL """I FAN ] COMPRESSOR MAIN BURNER I DUCT HZ HIGH TURBINE in— LOW TURBINE I...and pressure ratio. 6. Low Turbine Low turbine characteristics, identical In form to those of the high turbine, are shown in figures 27 and 28. 7

  3. School Athletics and Fan Aggression

    Science.gov (United States)

    Bryan, Clifford; Horton, Robert

    1976-01-01

    Several hypotheses are developed regarding fans and their behavior based upon a review of the literature. An exploratory study is then described, in which participant observers at a university sports arena observed cases of aggressive behavior among the spectators. Based upon the literature review and the findings of the study, four…

  4. Flow Over a Model Submarine

    Science.gov (United States)

    Jiménez, Juan; Smits, Alexander

    2003-11-01

    Experimental investigation over a DARPA SUBOFF submarine model (SUBOFF Model) was performed using flow visualization and Digital Particle Image Velocimetry (DPIV). The model has an axisymmetric body with sail and fins, and it was supported by a streamlined strut that was formed by the extension of the sail appendage. The range of flow conditions studied correspond to a Reynolds numbers based on model length, Re_L, of about 10^5. Velocity vector fields, turbulence intensities, vorticity fields, and flow visualization in the vicinity of the junction flows are presented. In the vicinity of the control surface and sail hull junctions, the presence of streamwise vortices in the form of horseshoe or necklace vortices locally dominates the flow. The effects of unsteady motions about an axis passing through the sail are also investigated to understand the evolution of the unsteady wake.

  5. Personality and coping strategies during submarine missions.

    Science.gov (United States)

    Sandal, Gro M; Endresen, Inger M; Vaernes, Ragnar; Ursin, Holger

    2003-01-01

    Relations between personality profiles, measured by the Personality Characteristics Inventory (PCI), and habitual coping strategies, measured by the Utrecht Coping List (UCL), were investigated in a sample of submarine personnel and office employees. The predictive validity of these instruments were examined for reported stress, health complaints, and salivary cortisone measures during 3 submarine missions. PCI and UCL were completed before the missions, and questionnaires and saliva were collected weekly. The results showed no significant relations between PCI profiles and coping strategies. Interpersonal orientation, achievement motivation, and habitual coping strategies were predictors for coping during the submarine missions. Problem-directed strategies and interpersonal sensitivity combined with strong achievement motivation were related to low indicated stress from social factors (lack of privacy, interpersonal tension, and crowding) and homesickness. The findings suggest that interpersonal characteristics need to be considered in the selection of submariners and personnel for other military settings in which units are exposed to prolonged stress and isolation.

  6. Aspects of Propeller Developements for a Submarine

    DEFF Research Database (Denmark)

    Andersen, Poul; kappel, Jens Julius; Spangenberg, Eugen

    2009-01-01

    Design and development of propellers for submarines are in some ways different from propellers for surface vessels. The most important demand is low acoustic signature that has priority over propeller efficiency, and the submarine propeller must be optimized with respect to acoustics rather than...... efficiency. Moreover the operating conditions of a submarine propeller are quite different. These aspects are discussed as well as the weighing of the various propeller parameters against the design objectives. The noise generated by the propeller can be characterized as thrust noise due to the inhomogeneous...... wake field of the submarine, trailing-edge noise and noise caused by turbulence in the inflow. The items discussed are demonstrated in a case study where a propeller of the Kappel type was developed. Three stages of the development are presented, including a design of an 8-bladed propeller where...

  7. CHALLENGES POSED BY RETIRED RUSSIAN NUCLEAR SUBMARINES

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, Dieter; Kroken, Ingjerd; Latyshev, Eduard; Griffith, Andrew

    2003-02-27

    The purpose of this paper is to provide an overview of the challenges posed by retired Russian nuclear submarines, review current U.S. and International efforts and provide an assessment of the success of these efforts.

  8. Personality and Coping Strategies During Submarine Missions

    OpenAIRE

    Sandal, Gro M.; Endresen, Inger M.; Vaernes, Ragnar; Ursin, Holger

    2003-01-01

    Relations between personality profiles, measured by the Personality Characteristics Inventory (PCI), and habitual coping strategies, measured by the Utrecht Coping List (UCL), were investigated in a sample of submarine personnel and office employees. The predictive validity of these instruments were examined for reported stress, health complaings, and salivary cortisone measures during 3 submarine missions. PCI and UCL were completed before the missions, and questionnaires and saliva were col...

  9. China's First Robot Submarine Archeologist

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    China recently announced successful experimentation with the first bionic robot “fish” in submarine archeology. This fish-like robot was put to work off the Fujian coast last year by archeologists conducting a submarine survey of an ancient battleship that was part of Ming general Zheng Chenggong's fleet The robot is capable of working continuously for 2-3 hours at a maximum speed of 1.5 m per second. Its performance was reported as “excellent”

  10. Sub-decadal turbidite frequency during the early Holocene: Eel Fan, offshore northern California

    Science.gov (United States)

    Paull, Charles K.; McGann, Mary L.; Sumner, Esther J; Barnes, Philip M; Lundsten, Eve M; Anderson, Krystle; Gwiazda, Roberto; Edwards, Brian D.; Caress, David W

    2014-01-01

    Remotely operated and autonomous underwater vehicle technologies were used to image and sample exceptional deep sea outcrops where an ∼100-m-thick section of turbidite beds is exposed on the headwalls of two giant submarine scours on Eel submarine fan, offshore northern California (USA). These outcrops provide a rare opportunity to connect young deep-sea turbidites with their feeder system. 14C measurements reveal that from 12.8 ka to 7.9 ka, one turbidite was being emplaced on average every 7 yr. This emplacement rate is two to three orders of magnitude higher than observed for turbidites elsewhere along the Pacific margin of North America. The turbidites contain abundant wood and shallow-dwelling foraminifera, demonstrating an efficient connection between the Eel River source and the Eel Fan sink. Turbidite recurrence intervals diminish fivefold to ∼36 yr from 7.9 ka onward, reflecting sea-level rise and re-routing of Eel River sediments.

  11. Submarine landslides: processes, triggers and hazard prediction.

    Science.gov (United States)

    Masson, D G; Harbitz, C B; Wynn, R B; Pedersen, G; Løvholt, F

    2006-08-15

    Huge landslides, mobilizing hundreds to thousands of km(3) of sediment and rock are ubiquitous in submarine settings ranging from the steepest volcanic island slopes to the gentlest muddy slopes of submarine deltas. Here, we summarize current knowledge of such landslides and the problems of assessing their hazard potential. The major hazards related to submarine landslides include destruction of seabed infrastructure, collapse of coastal areas into the sea and landslide-generated tsunamis. Most submarine slopes are inherently stable. Elevated pore pressures (leading to decreased frictional resistance to sliding) and specific weak layers within stratified sequences appear to be the key factors influencing landslide occurrence. Elevated pore pressures can result from normal depositional processes or from transient processes such as earthquake shaking; historical evidence suggests that the majority of large submarine landslides are triggered by earthquakes. Because of their tsunamigenic potential, ocean-island flank collapses and rockslides in fjords have been identified as the most dangerous of all landslide related hazards. Published models of ocean-island landslides mainly examine 'worst-case scenarios' that have a low probability of occurrence. Areas prone to submarine landsliding are relatively easy to identify, but we are still some way from being able to forecast individual events with precision. Monitoring of critical areas where landslides might be imminent and modelling landslide consequences so that appropriate mitigation strategies can be developed would appear to be areas where advances on current practice are possible.

  12. WHO ARE FANS OF FACEBOOK FAN PAGES? AN ELECTRONIC WORD-OF-MOUTH COMMUNICATION PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Xiao Hu

    2014-12-01

    Full Text Available Given its great business value and popularity, Facebook fan pages have attracted more and more attention in both industry and academia. Fans of Facebook fan pages play an important role in electronic word-of-mouth (eWOM communication. This study focused on the population of fans on Facebook fan pages and examined the differences between fans and non-fans in terms of demographics, social network sites (SNS use, Internet use, and online shopping behaviors. The results indicated that fans used SNS more frequently than non-fans. Additionally, from the eWOM perspective, the researchers moderated product types in the model of people’s word-of-mouth (WOM preferences and found that people had different preferences for eWOM and traditional WOM for different products. Traditional WOM is still the most important source of information for people when shopping online.

  13. Football – Feminisation – Fans

    DEFF Research Database (Denmark)

    Mintert, Svenja-Maria

    Football has long time been considered as a genuine masculine domain. However, in the current football culture, the dualism of masculinity and femaleness is in progress. More and more women consume football which is in many countries considered the most popular sport, not only in Scandinavia where...... the number of female fans in football has grown over the past years. A national sense of community, emotion and passion for the game is in particular reached during the international tournaments at live football spectacles and many female fans cheer and sing for ‘their’ team with the utmost conviction. Yet......, the combination ‘women and football’ is still adhered to certain scepticism. Objective The overall objective of this Ph.D. thesis is to contribute to the body of knowledge associated with the distinct aspects of women’s football, female fandom and gender identities in European football drawing upon various...

  14. An Interview with Fan Wu

    Institute of Scientific and Technical Information of China (English)

    李娜

    2006-01-01

    Fan Wu grew up on a farm in South China, in the community to where her parents were exiled during the Cultural Revolution (1966-1976). Wu moved to the United States in 1997, to attend Stanford University, and she began writing in 2002. She now lives and works in northern California, the United State. February Flowers is her first novel. During her recent book tour in China, she took time to talk to Women of China. Women of China (WOC): What inspired

  15. Submarine fans and associated deposits in the lower Tertiary of Guipuzcoa (Northern Spain)

    NARCIS (Netherlands)

    Vliet, van A.

    1982-01-01

    The Lower Tertiary outcrop along the coast of Guipuzcoa, northern Spain, consists exclusively of deep-marine sediments, deposited in a narrow elongated (ESE-WNW) basin. The early Tertiary sedimentary history of this basin can be described in terms of three main phases:- a phase of predominantly (hem

  16. Sediment dispersal pattern in the Bay of Bengal - evidence for commencement of Bengal Fan sedimentation

    Science.gov (United States)

    Krishna, K. S.; Ismaiel, M.; Karlapati, S.; Gopala Rao, D.; Mishra, J.; D, S.

    2015-12-01

    The sediment succession in the Bay of Bengal records signatures corresponding to India-Asia collision, regional climate, and erosional processes of the Himalayan orogeny and the Indian subcontinent. The Bengal Fan - world's largest submarine fan - has been long studied to understand the link between the Himalayan tectonics and Asian monsoon climate, but early phase information of the Himalaya erosion is not retrieved from the Indian Ocean due to lack of deep-core samples. Therefore, the missing corresponding signals hampered the understanding of coupled processes between tectonics, climate and erosion. Seismic reflection profiles and industrial drill wells from the western Bay of Bengal show two different modes of sediment deposition: initially Indian peninsular rivers discharged sediments to the ocean at a rate ~20 m/m.y. until Oligocene-Miocene time (~23 Ma) with the exception of two fairly-enhanced sediment pulses from 65 to 54 and again from 34 to 23 Ma; since 23 Ma the Ganges and Brahmaputra rivers added huge volumes of sediments to the bay with variable rates range from 40 to >1000 m/m.y. Using seismic stratigraphic technique we found a distinct increase in sediment discharge (~140 m/m.y.) at 23 Ma is an important age marker for the onset of Bengal Fan sedimentation as a coupled connection between the Himalayan tectonics and Asian climate. Further rise in sedimentation rate during the period 6.8 - 0.8 Ma is surprisingly not in agreement with the decrease in sediment rate reported at ODP Leg 116 sites in the distal Bengal Fan, but coincident with the change in monsoon intensity. Here we provide well constrained ages for the growth of the Bengal Fan, which can serve as benchmark for interactions between the Himalayan exhumation and Asian climate.

  17. Hydroplaning and submarine debris flows

    Science.gov (United States)

    de Blasio, Fabio V.; Engvik, Lars; Harbitz, Carl B.; ElverhøI, Anders

    2004-01-01

    Examination of submarine clastic deposits along the continental margins reveals the remnants of holocenic or older debris flows with run-out distances up to hundreds of kilometers. Laboratory experiments on subaqueous debris flows, where typically one tenth of a cubic meter of material is dropped down a flume, also show high velocities and long run-out distances compared to subaerial debris flows. Moreover, they show the tendency of the head of the flow to run out ahead of the rest of the body. The experiments reveal the possible clue to the mechanism of long run-out. This mechanism, called hydroplaning, begins as the dynamic pressure at the front of the debris flow becomes of the order of the pressure exerted by the weight of the sediment. In such conditions a layer of water can intrude under the sediment with a lubrication effect and a decrease in the resistance forces between the sediment and the seabed. A physical-mathematical model of hydroplaning is presented and investigated numerically. The model is applied to both laboratory- and field-scale debris flows. Agreement with laboratory experiments makes us confident in the extrapolation of our model to natural flows and shows that long run-out distances can be naturally attained.

  18. GRIM FATE OF UNLUCKY STRANDED SUBMARINE E13

    DEFF Research Database (Denmark)

    Nørby, Søren

    2015-01-01

    THE STORY OF A BRITISH SUBMARINE THAT SUFFERED AT THE HANDS OF THE GERMANS AFTER RUNNING AGROUND IN AUGUST 1915.......THE STORY OF A BRITISH SUBMARINE THAT SUFFERED AT THE HANDS OF THE GERMANS AFTER RUNNING AGROUND IN AUGUST 1915....

  19. Acoustic Power Transmission Through a Ducted Fan

    Science.gov (United States)

    Envia, Ed

    2016-01-01

    For high-speed ducted fans, when the rotor flowfield is shock-free, the main contribution to the inlet radiated acoustic power comes from the portion of the rotor stator interaction sound field that is transmitted upstream through the rotor. As such, inclusion of the acoustic transmission is an essential ingredient in the prediction of the fan inlet noise when the fan tip relative speed is subsonic. This paper describes a linearized Euler based approach to computing the acoustic transmission of fan tones through the rotor. The approach is embodied in a code called LINFLUX was applied to a candidate subsonic fan called the Advanced Ducted Propulsor (ADP). The results from this study suggest that it is possible to make such prediction with sufficient fidelity to provide an indication of the acoustic transmission trends with the fan tip speed.

  20. Computing Gröbner fans

    DEFF Research Database (Denmark)

    Fukuda, K.; Jensen, Anders Nedergaard; Thomas, R.R.

    2005-01-01

    This paper presents algorithms for computing the Gröbner fan of an arbitrary polynomial ideal. The computation involves enumeration of all reduced Gröbner bases of the ideal. Our algorithms are based on a uniform definition of the Gröbner fan that applies to both homogeneous and non...... are not always normal fans of polyhedra in which case reverse search applies automatically. Computational results using our implementation of these algorithms in the software package Gfan are included....

  1. REFINEMENTS OF THE FAN-TODD'S INEQUALITIES

    Institute of Scientific and Technical Information of China (English)

    庄国基

    2002-01-01

    Refinements to inequalities oninner product spaces are presented. In this respect, inequalities dealt with in this paper are: Cauchy's inequality, Bessel's inequality, Fan-Todd's inequality and Fan-Todd's determinantal inequality. In each case, a strictly increasing function is put forward, which lies between the smaller and the larger quantities of each inequality. As a result,an improved condition for equality of the Fan-Todd's determinantal inequality is deduced.

  2. The Challenges of Teaching Fan Studies

    DEFF Research Database (Denmark)

    Stephan, Matthias

    , has only gained in popularity. Yet, the nature of the course in question, an interdisciplinary open elective, has meant a class with a variety of backgrounds, preparation, and expectations from fan studies and its critical apparatus. In addition, due to the course being taught in English, it attracts...... a conversation about the best methods for teaching fan studies, and help to open up fan studies to be integrated into other courses and programs....

  3. Reducing Unsteady Loads on a Piggyback Miniature Submarine

    Science.gov (United States)

    Lin, John

    2009-01-01

    A small, simple fixture has been found to be highly effective in reducing destructive unsteady hydrodynamic loads on a miniature submarine that is attached in piggyback fashion to the top of a larger, nuclear-powered, host submarine. The fixture, denoted compact ramp, can be installed with minimal structural modification, and the use of it does not entail any change in submarine operations.

  4. An experimental approach to submarine canyon evolution

    Science.gov (United States)

    Lai, Steven Y. J.; Gerber, Thomas P.; Amblas, David

    2016-03-01

    We present results from a sandbox experiment designed to investigate how sediment gravity flows form and shape submarine canyons. In the experiment, unconfined saline gravity flows were released onto an inclined sand bed bounded on the downstream end by a movable floor that was used to increase relief during the experiment. In areas unaffected by the flows, we observed featureless, angle-of-repose submarine slopes formed by retrogressive breaching processes. In contrast, areas influenced by gravity flows cascading across the shelf break were deeply incised by submarine canyons with well-developed channel networks. Normalized canyon long profiles extracted from successive high-resolution digital elevation models collapse to a single profile when referenced to the migrating shelf-slope break, indicating self-similar growth in the relief defined by the canyon and intercanyon profiles. Although our experimental approach is simple, the resulting canyon morphology and behavior appear similar in several important respects to that observed in the field.

  5. Pore-fluid chemistry along the main axis of an active lobe at the Congo deep-sea fan

    Science.gov (United States)

    Croguennec, C.; Ruffine, L.; Guyader, V.; Le Bruchec, J.; Ruesch, B.; Caprais, J.; Cathalot, C.; de Prunelé, A.; Germain, Y.; Bollinger, C.; Dennielou, B.; Olu, K.; Rabouille, C.

    2013-12-01

    The distal lobes of the Congo deep-sea fan constitute a unique in situ laboratory to study early diagenesis of marine sediments. They are located at water depth of about 5000 m and result from the deposition of sediment transported by turbidity currents along the channel-levee systems and submarine canyon connected to the Congo River. Thus, a huge amount of organic matter, transported from the river to the lobes, undergoes decomposition processes involving different oxidants present within the sedimentary column. This drastically changes the chemistry of the pore fluids, allowing the occurence of a succession of biogeochemical processes. The present study is part of an ongoing project which aims at better understanding the role and the fate of organic matter transported to the lobe systems, as well as its implication in the distribution of the living communities encountered there. Thus, pore fluids have been sampled from 8 Calypso cores in order to determine the concentration of dissolved elements. Five sites have been investigated: four of them are located along the main axis of a currently active lobe, the last one being located on a lobe disconnected from the chenals. The analyses of methane, major (Cl, SO4, Mg, Ca, K, Na) and minor (Sr, Ba, B, Li, Mn) elements have been carried out along with total alkalinity determination. The resulting profiles show a highly heterogeneous pore-fluid chemistry. Sulphate concentration near the seawater/sediment interface varies from 3 to 29 mM, indicating intense sulphate reduction. Surprisingly the lowest values are found at the site which is disconnected from the active lobe. The manganese cycle is well defined for all cores. The core recovered at the more distal lobe exhibits very peculiar pore-fluid profiles which are likely related to a geological event, most likely sediment slide and remobilization. References: Babonneau, N., Savoye, B., Cremer, M. & Klein, B., 2002. Morphology and architecture of the present canyon and

  6. Geomorphic process fingerprints in submarine canyons

    Science.gov (United States)

    Brothers, Daniel S.; ten Brink, Uri S.; Andrews, Brian D.; Chaytor, Jason D.; Twichell, David C.

    2013-01-01

    Submarine canyons are common features of continental margins worldwide. They are conduits that funnel vast quantities of sediment from the continents to the deep sea. Though it is known that submarine canyons form primarily from erosion induced by submarine sediment flows, we currently lack quantitative, empirically based expressions that describe the morphology of submarine canyon networks. Multibeam bathymetry data along the entire passive US Atlantic margin (USAM) and along the active central California margin near Monterey Bay provide an opportunity to examine the fine-scale morphology of 171 slope-sourced canyons. Log–log regression analyses of canyon thalweg gradient (S) versus up-canyon catchment area (A) are used to examine linkages between morphological domains and the generation and evolution of submarine sediment flows. For example, canyon reaches of the upper continental slope are characterized by steep, linear and/or convex longitudinal profiles, whereas reaches farther down canyon have distinctly concave longitudinal profiles. The transition between these geomorphic domains is inferred to represent the downslope transformation of debris flows into erosive, canyon-flushing turbidity flows. Over geologic timescales this process appears to leave behind a predictable geomorphic fingerprint that is dependent on the catchment area of the canyon head. Catchment area, in turn, may be a proxy for the volume of sediment released during geomorphically significant failures along the upper continental slope. Focused studies of slope-sourced submarine canyons may provide new insights into the relationships between fine-scale canyon morphology and down-canyon changes in sediment flow dynamics.

  7. Submarine Pipeline Routing Risk Quantitative Analysis

    Institute of Scientific and Technical Information of China (English)

    徐慧; 于莉; 胡云昌; 王金英

    2004-01-01

    A new method for submarine pipeline routing risk quantitative analysis was provided, and the study was developed from qualitative analysis to quantitative analysis.The characteristics of the potential risk of the submarine pipeline system were considered, and grey-mode identification theory was used. The study process was composed of three parts: establishing the indexes system of routing risk quantitative analysis, establishing the model of grey-mode identification for routing risk quantitative analysis, and establishing the standard of mode identification result. It is shown that this model can directly and concisely reflect the hazard degree of the routing through computing example, and prepares the routing selection for the future.

  8. Active Control of Fan Noise

    Institute of Scientific and Technical Information of China (English)

    Nobuhiko YAMASAKI; Hirotoshi TAJIMA

    2008-01-01

    In the wake-rotor interaction fan noise, a number of the interacting modes at the blade passing frequency (BPF)and its harmonics are generated which are prescribed by the number of stator and rotor blades etc. In the present study, the dominant mode is tried to be suppressed by the secondary sound from the loudspeaker actuators. One of the novel features of the present system is the adoption of the control board with the Field Programmable Gate Array (FPGA) hardware and the LabVIEW software to synchronize the circumferentially installed loudspeaker actuators with the relative location of rotational blades under arbitrary fan rotational speeds. The experiments were conducted under the conditions of three rotational speeds of 2004, 3150, and 4002 [rpm]. The reduction in the sound pressure level (SPL) was observed for all three rotational speeds. The sound pressure level at the BPF was reduced approximately 13 [dB] for 2004 [rpm] case, but not so large reduction was attained for other cases probably due to the inefficiency of the loudspeaker actuators at high frequencies

  9. Addressing submarine geohazards through scientific drilling

    Science.gov (United States)

    Camerlenghi, A.

    2009-04-01

    Natural submarine geohazards (earthquakes, volcanic eruptions, landslides, volcanic island flank collapses) are geological phenomena originating at or below the seafloor leading to a situation of risk for off-shore and on-shore structures and the coastal population. Addressing submarine geohazards means understanding their spatial and temporal variability, the pre-conditioning factors, their triggers, and the physical processes that control their evolution. Such scientific endeavour is nowadays considered by a large sector of the international scientific community as an obligation in order to contribute to the mitigation of the potentially destructive societal effects of submarine geohazards. The study of submarine geohazards requires a multi-disciplinary scientific approach: geohazards must be studied through their geological record; active processes must be monitored; geohazard evolution must be modelled. Ultimately, the information must be used for the assessment of vulnerability, risk analysis, and development of mitigation strategies. In contrast with the terrestrial environment, the oceanic environment is rather hostile to widespread and fast application of high-resolution remote sensing techniques, accessibility for visual inspection, sampling and installation of monitoring stations. Scientific Drilling through the IODP (including the related pre site-survey investigations, sampling, logging and in situ measurements capability, and as a platform for deployment of long term observatories at the surface and down-hole) can be viewed as the centre of gravity of an international, coordinated, multi-disciplinary scientific approach to address submarine geohazards. The IODP Initial Science Plan expiring in 2013 does not address openly geohazards among the program scientific objectives. Hazards are referred to mainly in relation to earthquakes and initiatives towards the understanding of seismogenesis. Notably, the only drilling initiative presently under way is the

  10. Seatbelt submarining injury and its prevention countermeasures: How a cantilever seat pan structure exacerbate submarining.

    Science.gov (United States)

    Thorbole, Chandrashekhar K

    2015-01-01

    The purpose of this study and a case report was to demonstrate seat belt webbing induced injury due to seatbelt submarining during the frontal motor vehicle crash. Submarining is an undesired phenomenon during a frontal crash scenario and is dependent on design features of the seat pan and seatbelt system. The lack of adequate anti-submarining features at any seating position with three-point restraint can cause abdominal solid and hollow organ injuries. This paper reports a case of submarining and factors that exacerbated this phenomenon leading to critical occupant abdominal injury. This case report and the following injury causation analysis demonstrate the shortcomings of a cantilever seat pan design in context to the occupant safety. The inadequate seat pan anti-submarining feature in association with lack of seatbelt load-limiter and Pretensioner reduces the level of occupant protection offered by the seat belt system in the rear seat. This case report shows the dangers of cantilever seat pan design and its association with increased risk of submarining causing severe abdominal injuries.

  11. Seatbelt submarining injury and its prevention countermeasures: How a cantilever seat pan structure exacerbate submarining

    Directory of Open Access Journals (Sweden)

    Chandrashekhar K Thorbole

    2015-01-01

    Full Text Available The purpose of this study and a case report was to demonstrate seat belt webbing induced injury due to seatbelt submarining during the frontal motor vehicle crash. Submarining is an undesired phenomenon during a frontal crash scenario and is dependent on design features of the seat pan and seatbelt system. The lack of adequate anti-submarining features at any seating position with three-point restraint can cause abdominal solid and hollow organ injuries. This paper reports a case of submarining and factors that exacerbated this phenomenon leading to critical occupant abdominal injury. This case report and the following injury causation analysis demonstrate the shortcomings of a cantilever seat pan design in context to the occupant safety. The inadequate seat pan anti-submarining feature in association with lack of seatbelt load-limiter and Pretensioner reduces the level of occupant protection offered by the seat belt system in the rear seat. This case report shows the dangers of cantilever seat pan design and its association with increased risk of submarining causing severe abdominal injuries.

  12. German Submarine Offensives and South African Countermeasures ...

    African Journals Online (AJOL)

    Evert

    The first German submarine offensive in South African waters during 1942, Operation ... The German occupation of France in May 1940 provided the BdU with an ...... trawlers had to protect an average of 38 convoys which operated in South ...

  13. Phase 1 Final Report: Titan Submarine

    Science.gov (United States)

    Oleson, Steven R.; Lorenz, Ralph D.; Paul, Michael V.

    2015-01-01

    The conceptual design of a submarine for Saturn's moon Titan was a funded NASA Innovative Advanced Concepts (NIAC) Phase 1 for 2014. The proposal stated the desire to investigate what science a submarine for Titan's liquid hydrocarbon seas might accomplish and what that submarine might look like. Focusing on a flagship class science system (100 kg), it was found that a submersible platform can accomplish extensive science both above and below the surface of the Kraken Mare. Submerged science includes mapping using side-looking sonar, imaging and spectroscopy of the lake, as well as sampling of the lake's bottom and shallow shoreline. While surfaced, the submarine will not only sense weather conditions (including the interaction between the liquid and atmosphere) but also image the shoreline, as much as 2 km inland. This imaging requirement pushed the landing date to Titan's next summer period (2047) to allow for lighted conditions, as well as direct-to-Earth communication, avoiding the need for a separate relay orbiter spacecraft. Submerged and surfaced investigation are key to understanding both the hydrological cycle of Titan as well as gather hints to how life may have begun on Earth using liquid, sediment, and chemical interactions. An estimated 25 Mb of data per day would be generated by the various science packages. Most of the science packages (electronics at least) can be safely kept inside the submarine pressure vessel and warmed by the isotope power system.The baseline 90-day mission would be to sail submerged and surfaced around and through Kraken Mare investigating the shoreline and inlets to evaluate the sedimentary interaction both on the surface and then below. Depths of Kraken have yet to be sensed (Ligeia to the north is thought to be 200 m (656 ft) deep), but a maximum depth of 1,000 m (3,281 ft) for Kraken Mare was assumed for the design). The sub would spend 20 d at the interface between Kraken Mare and Ligeia Mare for clues to the drainage of

  14. Monitoring of the nuclear submarine Komsomolets

    Energy Technology Data Exchange (ETDEWEB)

    Heldal, Hilde E.; Flo, Janita K.; Liebig, Penny L. [Institute of Marine Research, P. O. Box 1870 Nordnes, N-5817 Bergen (Norway); Gaefvert, Torbjoern; Rudjord, Anne Liv [Norwegian Radiation Protection Authority, P.O. Box 55, N-1332 Oesteraas (Norway); Gwynn, Justin P. [Norwegian Radiation Protection Authority, The Fram Centre, N-9296 Tromsoe (Norway)

    2014-07-01

    The Soviet nuclear submarine Komsomolets sank on the 7 April 1989, 180 km southwest of Bear Island in the Norwegian Sea to a depth of about 1655 m. The submarine contains one nuclear reactor containing long-lived radionuclides such as cesium-137 ({sup 137}Cs) along with other fission and activation products, in addition to 2 mixed uranium/plutonium nuclear warheads containing weapons grade plutonium. Although several model studies have shown that a radioactive leakage from Komsomolets will have insignificant impact on fish and other marine organisms, there are still public concerns about the condition of the submarine and the potential for radioactive leakage. In order to document the contamination levels and to meet public concerns, monitoring of radioactive contamination in the area adjacent to the submarine has been ongoing since 1993. Samples of bottom seawater and sediments have been collected annually by the Institute of Marine Research (IMR) and have been analysed for {sup 137}Cs and plutonium-239,240 ({sup 239,240}Pu). So far, activity concentrations in the samples have been comparable to levels found in other samples from the Norwegian and Barents Seas. During sampling from R/V 'G. O. Sars' in April 2013, an area of about 1 km{sup 2} of the seabed around Komsomolets was mapped to precisely locate the submarine using a Kongsberg EM302 multibeam echo sounder, a Simrad EK60 single beam echo sounder and an Olex 3D bottom-mapping system. For sediment sampling, a Simrad MST342 mini-transponder was attached to a Smoegen box corer to allow for precise positioning of the corer. With the aid of the Kongsberg HiPAP (High Precision Acoustic Positioning) system, 4 box cores were collected around the submarine at a distance of 10 to 20 m. In addition, one box core was collected from a reference station about 100 m upstream of the submarine. Surface sediments and sediment cores were collected from the box cores taken at each sampling location. Sediment cores

  15. The World's Largest Submarine Canyon—Kroenke Canyon in the Western Equatorial Pacific

    Science.gov (United States)

    Coffin, M. F.; Adams, N.; Whittaker, J. M.; Lucieer, V.; Heckman, M.; Ketter, T.; Neale, J. F.; Reyes, A.; Travers, A.

    2015-12-01

    Kroenke Canyon lies on the Ontong Java Plateau (OJP) in the western Equatorial Pacific, between the Solomon Islands and the Federated States of Micronesia. In late 2014 aboard the Schmidt Ocean Institute's RV Falkor, we mapped, albeit incompletely, the Canyon for the first time, revealing that it is both the longest (>700 km) and the most voluminous (>6800 km3) submarine canyon yet discovered on Earth. Kroenke Canyon appears to originate in the vicinity of Ontong Java (Solomon Islands) and Nukumanu (Papua New Guinea) atolls, and presumably began to develop when the atolls were high-standing volcanic islands surmounting the ~120 Ma igneous basement of the OJP. The Canyon is characterised by numerous tributaries and significant mass wasting. Kroenke Canyon incises the layer-cake stratigraphy of OJP sediment and sedimentary rock, mostly carbonate with some interbedded chert, which has provided numerous slip surfaces for submarine landslides. The carbonate compensation depth (CCD) roughly coincides with the depth of the transition between the OJP and the neighbouring Nauru Basin. As a result, despite the large volume of sediment eroded and transported by canyon-forming processes, only a minor fan is evident in the Nauru Basin because most of the carbonate has dissolved.

  16. Highly Loaded Fan by Using Tandem Cascade Rotor Blade

    Science.gov (United States)

    Hasegawa, Hiroaki; Suga, Shinya; Matsuoka, Akinori

    For axial flow compressors and fans in the aircraft engines higher pressure ratio is required in order to attain the high thrust engines. In this study, the fan with the tandem cascades was introduced to increase the fan pressure ratio. The use of tandem cascades in the fan allows savings in length and weight and therefore a compact fan could be built. The design of fan with tandem cascades and the fan testing were carried out to develop the high pressure ratio fan for the Air Turbo Ramjet (ATR) propulsion system. The ATR is a combined cycle engine which performs like a turbojet engine at subsonic speeds and a ramjet at supersonic speeds. In particular, high fan pressure ratio contributes to increase the engine thrust during subsonic flight at which the engine does not make use of ram effect. The results of the fan testing indicate that the pressure ratio of 2.2 is achieved in single stage fan.

  17. Turbofan gas turbine engine with variable fan outlet guide vanes

    Science.gov (United States)

    Wood, Peter John (Inventor); Zenon, Ruby Lasandra (Inventor); LaChapelle, Donald George (Inventor); Mielke, Mark Joseph (Inventor); Grant, Carl (Inventor)

    2010-01-01

    A turbofan gas turbine engine includes a forward fan section with a row of fan rotor blades, a core engine, and a fan bypass duct downstream of the forward fan section and radially outwardly of the core engine. The forward fan section has only a single stage of variable fan guide vanes which are variable fan outlet guide vanes downstream of the forward fan rotor blades. An exemplary embodiment of the engine includes an afterburner downstream of the fan bypass duct between the core engine and an exhaust nozzle. The variable fan outlet guide vanes are operable to pivot from a nominal OGV position at take-off to an open OGV position at a high flight Mach Number which may be in a range of between about 2.5-4+. Struts extend radially across a radially inwardly curved portion of a flowpath of the engine between the forward fan section and the core engine.

  18. Bright Streaks and Dark Fans

    Science.gov (United States)

    2007-01-01

    The south polar region of Mars is covered every year by a layer of carbon dioxide ice. In a region called the 'cryptic terrain,' the ice is translucent and sunlight can penetrate through the ice to warm the surface below. The ice layer sublimates (evaporates) from the bottom. The dark fans of dust seen in this image come from the surface below the layer of ice, carried to the top by gas venting from below. The translucent ice is 'visible' by virtue of the effect it has on the tone of the surface below, which would otherwise have the same color and reflectivity as the fans. Bright streaks in this image are fresh frost. The CRISM team has identified the composition of these streaks to be carbon dioxide. Observation Geometry Image PSP_003113_0940 was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard the Mars Reconnaissance Orbiter spacecraft on 26-Mar-2007. The complete image is centered at -85.8 degrees latitude, 106.0 degrees East longitude. The range to the target site was 244.9 km (153.0 miles). At this distance the image scale is 49.0 cm/pixel (with 2 x 2 binning) so objects 147 cm across are resolved. The image shown here has been map-projected to 50 cm/pixel . The image was taken at a local Mars time of 06:20 PM and the scene is illuminated from the west with a solar incidence angle of 79 degrees, thus the sun was about 11 degrees above the horizon. At a solar longitude of 207.6 degrees, the season on Mars is Northern Autumn.

  19. Dynamic response of Hovercraft lift fans

    Science.gov (United States)

    Moran, D. D.

    1981-08-01

    Hovercraft lift fans are subjected to varying back pressure due to wave action and craft motions when these vehicles are operating in a seaway. The oscillatory back pressure causes the fans to perform dynamically, exhibiting a hysteresis type of response and a corresponding degradation in mean performance. Since Hovercraft motions are influenced by variations in lift fan pressure and discharge, it is important to understand completely the nature of the dynamic performance of lift fans in order to completely solve the Hovercraft seakeeping problem. The present study was performed to determine and classify the instabilities encountered in a centrifugal fan operating against time-varying back pressure. A model-scale experiment was developed in which the fan discharge was directed into a flow-measuring device, terminating in a rotating valve which produced an oscillatory back pressure superimposed upon a mean aerodynamic resistance. Pressure and local velocity were measured as functions of time at several locations in the fan volute. The measurements permitted the identification of rotating (or propagating) stall in the impeller. One cell and two cell configurations were classified and the transient condition connecting these two configurations was observed. The mechanisms which lead to rotating stall in a centrifugal compressor are presented and discussed with specific reference to Hovercraft applications.

  20. Fan-structure waves in shear ruptures

    Science.gov (United States)

    Tarasov, Boris

    2016-04-01

    This presentation introduces a recently identified shear rupture mechanism providing a paradoxical feature of hard rocks - the possibility of shear rupture propagation through the highly confined intact rock mass at shear stress levels significantly less than frictional strength. According to the fan-mechanism the shear rupture propagation is associated with consecutive creation of small slabs in the fracture tip which, due to rotation caused by shear displacement of the fracture interfaces, form a fan-structure representing the fracture head. The fan-head combines such unique features as: extremely low shear resistance (below the frictional strength), self-sustaining stress intensification in the rupture tip (providing easy formation of new slabs), and self-unbalancing conditions in the fan-head (making the failure process inevitably spontaneous and violent). An important feature of the fan-mechanism is the fact that for the initial formation of the fan-structure an enhanced local shear stress is required, however, after completion of the fan-structure it can propagate as a dynamic wave through intact rock mass at shear stresses below the frictional strength. Paradoxically low shear strength of pristine rocks provided by the fan-mechanism determines the correspondingly low transient strength of the lithosphere, which favours generation of new earthquake faults in the intact rock mass adjoining pre-existing faults in preference to frictional stick-slip instability along these faults. The new approach reveals an alternative role of pre-existing faults in earthquake activity: they represent local stress concentrates in pristine rock adjoining the fault where special conditions for the fan-mechanism nucleation are created, while further dynamic propagation of the new fault (earthquake) occurs at low field stresses even below the frictional strength.

  1. Disabled Woman Heads Beijing Fans Association

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    THE next time you go to a football match in Beijing, look around the edge of the field. You might see a young woman in a wheelchair cheering her favorite team. Wu Jinghong is more than a handicapped person, more than a woman football fan. She is the head of the Beijing Football Fans Association, a group more than 1,000 members strong. Wu alone started the association in 1988 and because she is a woman, encouraged other women fans to openly support their favorite teams.

  2. Sherlock (Holmes in Japanese (fan works [symposium

    Directory of Open Access Journals (Sweden)

    Lori Morimoto

    2017-03-01

    Full Text Available I explore the history of Japanese writing centered on Sherlock Holmes as a means of interrogating the 2014 BBC Sherlock pastiche John and Sherlock Casebook 1: Jon, zenchi renmei e iku (The stark naked league, written by Japanese Sherlockian Kitahara Naohiko for mainstream publication by the publishing house Hayakawa shobō. I argue that exploration of the Japanese (fan cultural contexts of Kitahara's book begins to reveal the limits of the Anglo-American-centered framework through which fan studies scholars explore fan/producer relationships.

  3. 30 CFR 75.311 - Main mine fan operation.

    Science.gov (United States)

    2010-07-01

    ... back-up fan system— (1) Only persons necessary to evaluate the effect of the fan stoppage or restart... back-up fan system is used that does not provide the ventilating quantity provided by the main mine fan... fire or other products of combustion are approved in the ventilation plan. (g) If multiple mine...

  4. PICNIC - FANS, ULTRAS AND HOOLIGANS - INTERNAL DIFFERENTIATE OF SUBCULTURE GROUP FOOTBALL FANS IN POLAND

    Directory of Open Access Journals (Sweden)

    Maciej Solinski

    2006-01-01

    Full Text Available This article is a main part of "Internal differentiate of subculture group of football fans in Poland" project. Author has tried to show how the subculture of football fans can be differentiate. Author ha presented three different subgroups of Polish fans. It is very important to divide this subculture, because each subgroup has different mentality and style. That is why I have paid the most attention on this element.

  5. Knowing fans, knowing music : an exploration of fan interaction on Twitter

    OpenAIRE

    2011-01-01

    In this thesis, I examine what "knowing music" means to participants in online social musicking activities, along with the role Twitter plays in this process. I compare the way I came to "know" music through social networks with others' behaviors regarding music and social networking. Using Henry Jenkins's research framework as an aca-fan (a portmanteau word combining academic and fan), I study fan communities from the inside out. I begin by outlining my story of coming to know the music that...

  6. Numerical Analysis for the Air Flow of Cross Flow Fan

    Science.gov (United States)

    Sakai, Hirokazu; Tokushge, Satoshi; Ishikawa, Masatoshi; Ishihara, Takuya

    There are many factors for designing the cross flow fan. Therefore, the performance of cross flow fan is not clear yet. We can analyze the transient flow of a cross flow fan using sliding mesh approach. One of the tasks using Computational Fluid Dynamics (CFD) is a way of modeling for analysis heat exchangers with cross flow fan. These tasks are very important for design. The paper has a modeling of heat exchangers and meshing the fan blades. The next tasks, we focus the ability of cross flow fan when we change the geometry of fan blades.

  7. Anatomy and growth pattern of Amazon deep-sea fan as revealed by long-range side-scan sonar (GLORIA) and high-resolution seismic studies

    Energy Technology Data Exchange (ETDEWEB)

    Damuth, J.E.; Flood, R.D.; Kowsmann, R.O.; Belderson, R.H.; Gorini, M.A.

    1988-08-01

    Imaging of the Amazon deep-sea fan with long-range side-scan sonar (GLORIA) has, for the first time, revealed the anatomy, trends, and growth pattern of distributary channels on this fan. Only one channel-levee system was active at any given time and extended from the Amazon Submarine Canyon downslope onto the lower fan (> 4,200 m). Formation of new channel-levee systems occurred when a currently active channel-levee system was cut off and abandoned through avulsion, and a new channel-levee system was established nearby. Through time, successive channel-levee formation and abandonment built two broad levee complexes consisting of groups of overlapping, coalescing segments of channel-levee systems across the present fan surface. These, plus older, now buried levee complexes, indicate that fan growth is radially outward and downslope through development of successive levee complexes. The most striking characteristic of the distributary channels is their intricate, often recurving, meanders with sinuosities of up to 2.5. Cutoffs and abandoned meander loops indicate that the channels migrate laterally through time. Channel bifurcation results predominantly from avulsion when flows breach a channel levee, thereby abandoning the present channel and establishing a new channel-levee segment nearby. No clear evidence of channel branching (i.e., division of a single channel into two active segments) or braiding was observed. 22 figs.

  8. Response analysis of a submarine cable under fault movement

    Institute of Scientific and Technical Information of China (English)

    Liu Aiwen

    2009-01-01

    Based on the performance of submarine cables in past earthquakes, an analytical method to determine cable performance under seabed fault movement is proposed in this paper. First, common types of earthquake damage to submarine cables are summarized, which include seabed displacement induced by fault movement, submarine landslides and seabed soil liquefaction, etc. The damage is similar to damage observed to buried pipelines following land earthquakes. The Hengchun earthquake of Dec. 26, 2006 is used as a case study. The M7.2 earthquake occurred in the South China Sea at 20:26 Beijing Time, and caused 14 international submarine cables to sever and break. The results show that the proposed method predicts damage similar to that observed in the Hengchun earthquake. Based on parametric studies of the influence of the water depth and the magnitude of the submarine earthquake, countermeasures to prevent damage to submarine cables are proposed.

  9. Submarine Magnetic Field Extrapolation Based on Boundary Element Method

    Institute of Scientific and Technical Information of China (English)

    GAO Jun-ji; LIU Da-ming; YAO Qiong-hui; ZHOU Guo-hua; YAN Hui

    2007-01-01

    In order to master the magnetic field distribution of submarines in the air completely and exactly and study the magnetic stealthy performance of submarine, a mathematic model of submarine magnetic field extrapolation is built based on the boundary element method (BEM). An experiment is designed to measure three components of magnetic field on the envelope surface surrounding a model submarine. The data in differentheights above the model submarine are obtained by use of tri-axial magnetometers. The results show that this extrapolation model has good stabilities and high accuracies compared the measured data with the extrapolated data. Moreover, the model can reflect the submarine magnetic field distribution in the air exactly, and is valuable in practical engineering.

  10. Active Vibration Reduction of Titanium Alloy Fan Blades (FAN1) Using Piezoelectric Materials

    Science.gov (United States)

    Choi, Benjamin; Kauffman, Jeffrey; Duffy, Kirsten; Provenza, Andrew; Morrison, Carlos

    2010-01-01

    The NASA Glenn Research Center is developing smart adaptive structures to improve fan blade damping at resonances using piezoelectric (PE) transducers. In this paper, a digital resonant control technique emulating passive shunt circuits is used to demonstrate vibration reduction of FAN1 Ti real fan blade at the several target modes. Single-mode control and multi-mode control using one piezoelectric material are demonstrated. Also a conceptual study of how to implement this digital control system into the rotating fan blade is discussed.

  11. How to do things with fan subs: Media engagement as subcultural capital in anime fan subbing

    Directory of Open Access Journals (Sweden)

    Douglas Schules

    2014-09-01

    Full Text Available Anime fandom has been a fairly constant subject in fan scholarship, although only recently have conversations about fan subbing begun to circulate. As useful as those conversations are, none have directly dealt either with the mechanisms of fan subbing, particularly the use of linear notes, as a practice or with how these subs intersect with the flows of subcultural capital. Fan subbing, both as a productive and a consumptive practice, plays a small but influential part in subcultural capital. Engagement with media is a compositional element of such capital in this community.

  12. Magnetic anomalies in Central Bengal fan

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, T.C.S.; Lakshminarayana, S.; Sarma, K.V.L.N.S.

    Total magnetic field anomalies recorded over the Central Bengal Fan are analysed and the depths to the magnetic basement are computed using the analytical signal and the Werner deconvolution methods. To the west and east of 85 degrees E...

  13. Computing Gröbner fans

    DEFF Research Database (Denmark)

    Fukuda, K.; Jensen, Anders Nedergaard; Thomas, R.R.

    2005-01-01

    This paper presents algorithms for computing the Gröbner fan of an arbitrary polynomial ideal. The computation involves enumeration of all reduced Gröbner bases of the ideal. Our algorithms are based on a uniform definition of the Gröbner fan that applies to both homogeneous and non......-homogeneous ideals and a proof that this object is a polyhedral complex. We show that the cells of a Gröbner fan can easily be oriented acyclically and with a unique sink, allowing their enumeration by the memory-less reverse search procedure. The significance of this follows from the fact that Gröbner fans...

  14. Quiet, High-Efficiency Vaneaxial Fans Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During this Phase I effort, CRG proposes to demonstrate the ability to significantly reduce the acoustic signature of vaneaxial fans by establishing quiet...

  15. Mexican Fan Palm - Orange Co. [ds350

    Data.gov (United States)

    California Department of Resources — This dataset provides the known distribution of Mexican fan palm (Washingtonia robusta) in southern Orange County. The surveys were conducted from May to June, 2007...

  16. Synchronous and Cogged Fan Belt Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Cutler, D.; Dean, J.; Acosta, J.

    2014-02-01

    The GSA Regional GPG Team commissioned the National Renewable Energy Laboratory (NREL) to perform monitoring of cogged V-belts and synchronous belts on both a constant volume and a variable air volume fan at the Byron G. Rodgers Federal Building and U.S. Courthouse in Denver, Colorado. These motor/fan combinations were tested with their original, standard V-belts (appropriately tensioned by an operation and maintenance professional) to obtain a baseline for standard operation. They were then switched to the cogged V-belts, and finally to synchronous belts. The power consumption by the motor was normalized for both fan speed and air density changes. This was necessary to ensure that the power readings were not influenced by a change in rotational fan speed or by the power required to push denser air. Finally, energy savings and operation and maintenance savings were compiled into an economic life-cycle cost analysis of the different belt options.

  17. A method to assess fluvial fan channel networks, with a preliminary application to fans in coastal British Columbia

    Science.gov (United States)

    Millard, Thomas Hugh; Hogan, Dan L.; Wilford, David J.; Roberts, Brian

    2010-03-01

    The channel network on a fluvial fan distributes sediment across the fan surface and determines fan development. We present a method to characterize fan channel networks (FCNs) so that the effect of controls (e.g., sediment supply) on the FCN can be evaluated. We then do a preliminary test of the method using three fans in coastal British Columbia. The method uses a set of three measures: 1) the spatial extent of hydrogeomorphic activity, measured as the percentage of the contemporary fan surface area occupied by active channels; 2) the topologic structure, using node counts to measure channel network complexity; and 3) a sediment budget to indicate the proportion of sediment that is stored on the fan, loosely characterized by comparing the second-largest clast size of sediment at the fan apex or intersection point with the second-largest clast at the toe of the fan. These measures were applied to two fan deltas and one partial fan delta in northern Vancouver Island, British Columbia, using channel surveys conducted in 2006 and 2007. All three fans are located within 30 km of each other, have similar climatic, physiographic, and vegetation settings, and have natural channel networks. Each fan has perennial channel flow at the fan apex. Watershed areas range from 19.5 to 35.6 km 2, and contemporary fan areas range from 0.2 to 0.7 km 2. The Melton Relative Relief ratio ranges from 0.24 to 0.30 and none of the fans show evidence of debris floods or debris flows. In addition to testing the efficacy of the FCN measures, we use these fans to explore the question of whether fans in similar geomorphic settings and with similar controls develop similar FCNs. Results show the fans have between 4.7-8.5 % of the contemporary fan surface occupied by the active channel network. Topologic node counts indicate that the two fan deltas have a similar level of channel complexity, with 42-54 nodes in total. The partial fan delta channel network is approximately half as complex, with

  18. Hybrid Intelligent Control for Submarine Stabilization

    Directory of Open Access Journals (Sweden)

    Minghui Wang

    2013-05-01

    Full Text Available While sailing near the sea surface, submarines will often undergo rolling motion caused by wave disturbance. Fierce rolling motion seriously affects their normal operation and even threatens their security. We propose a new control method for roll stabilization. This paper studies hybrid intelligent control combining a fuzzy control, a neural network and extension control technology. Every control strategy can achieve the ideal control effect within the scope of its effective control. The neuro‐fuzzy control strategy is used to improve the robustness of the controller. The speed control strategy and the course control strategy are conducted to extend the control range. The paper also proposes the design of the controller and carries out the simulation experiment in different sea conditions. The simulation results show that the control method proposed can indeed effectively improve the control performance of submarine stabilization.

  19. Voluminous submarine lava flows from Hawaiian volcanoes

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, R.T.; Moore, J.G.; Lipman, P.W.; Belderson, R.H.

    1988-05-01

    The GLORIA long-range sonar imaging system has revealed fields of large lava flows in the Hawaiian Trough east and south of Hawaii in water as deep as 5.5 km. Flows in the most extensive field (110 km long) have erupted from the deep submarine segment of Kilauea's east rift zone. Other flows have been erupted from Loihi and Mauna Loa. This discovery confirms a suspicion, long held from subaerial studies, that voluminous submarine flows are erupted from Hawaiian volcanoes, and it supports an inference that summit calderas repeatedly collapse and fill at intervals of centuries to millenia owing to voluminous eruptions. These extensive flows differ greatly in form from pillow lavas found previously along shallower segments of the rift zones; therefore, revision of concepts of volcano stratigraphy and structure may be required.

  20. Hybrid Intelligent Control for Submarine Stabilization

    Directory of Open Access Journals (Sweden)

    Minghui Wang

    2013-05-01

    Full Text Available Abstract While sailing near the sea surface, submarines will often undergo rolling motion caused by wave disturbance. Fierce rolling motion seriously affects their normal operation and even threatens their security. We propose a new control method for roll stabilization. This paper studies hybrid intelligent control combining a fuzzy control, a neural network and extension control technology. Every control strategy can achieve the ideal control effect within the scope of its effective control. The neuro-fuzzy control strategy is used to improve the robustness of the controller. The speed control strategy and the course control strategy are conducted to extend the control range. The paper also proposes the design of the controller and carries out the simulation experiment in different sea conditions. The simulation results show that the control method proposed can indeed effectively improve the control performance of submarine stabilization.

  1. Influence of Anchoring on Burial Depth of Submarine Pipelines

    OpenAIRE

    Yuan Zhuang; Yang Li; Wei Su

    2016-01-01

    Since the beginning of the twenty-first century, there has been widespread construction of submarine oil-gas transmission pipelines due to an increase in offshore oil exploration. Vessel anchoring operations are causing more damage to submarine pipelines due to shipping transportation also increasing. Therefore, it is essential that the influence of anchoring on the required burial depth of submarine pipelines is determined. In this paper, mathematical models for ordinary anchoring and emerge...

  2. A Lanchester model of submarine attack on a carrier battlegroup

    OpenAIRE

    Eagle, James N.

    1987-01-01

    A Lanchester model is developed for a battlegroup ASW engagement. Two variations are included. In the first, long-range missile firing submarines, short-range missile or torpedo firing submarines, and submarines firing only torpedoes distribute their attack uniformly over battlegroup escort ships and carriers. In the second variation, the attack is concentrated on the carriers. supported by the Naval War College http://archive.org/details/lanchestermodelo00eagl NA

  3. Submarine Landslides: What we Know and Where we are Going!

    Science.gov (United States)

    Moscardelli, L. G.; Mountjoy, J. J.; Micallef, A.; Strasser, M.; Vanneste, M.; Chaytor, J. D.; Mosher, D.; Krastel, S.; Lo Iacono, C.; Yamada, Y.

    2015-12-01

    Submarine landslides and other gravity-induced movements can disrupt very large areas of continental margins resulting in long-term seafloor morphologic change and multi-scale mass transport deposits (MTDs). Potential consequences of submarine landslides include damage to seabed infrastructure, offshore facilities, as well as generation or enhancement of tsunamis. MTDs are common on the modern seafloor and within the stratigraphic record. Slides, slumps and debris flows can be constituents of MTDs and can co-occur in the same event or depositional unit. Recent research indicates that relationships exist between MTD geological setting, causal mechanisms, and geometries. Quantitative data analysis suggests that MTD morphometric parameters can be used to link these three parameters. Despite many advances in this field, it still remains unclear how to definitively identify pre-conditioning factors and triggers of submarine landslides in modern slopes, and how submarine landslides evolve after initiation. In addition, new questions regarding the interaction between submarine landslides and active marine processes, such as bottom currents and fluid flow, have emerged.One of the mandates of the S4SLIDE (IGCP-640) project, a joint endeavor of UNESCO and IGCP that represents the broad field of submarine landslide research, is to facilitate interactions at an international level among scientists, industry and government representatives to advance our knowledge on a number of outstanding science questions: (i) What is the nature of the interaction between current-controlled sedimentation and submarine landslides? (ii) What role do transient turbulent-laminar flows play in the formation of submarine landslides? (iii) Do climatic variations control the occurrence of submarine landslides? (iv) What is the economic significance of submarine landslides? (v) Do we understand the hazards that submarine landslides pose to the environment and to humans? This presentation will cover

  4. LINEAR AND NONLINEAR BUCKLING ANALYSIS OF STIFFENED CYLINDRICAL SUBMARINE HULL

    OpenAIRE

    SREELATHA P.R; ALICE MATHAI

    2012-01-01

    Submarine is a watercraft capable of independent operation under water. Use of submarines includes marine science, offshore industry underwater exploration etc. The pressure hull of submarine is constructed as combination of cylinders and domes. The shell is subjected to very high hydrostatic pressure, which creates large compressive stress resultants. Due to this the structure is susceptible to buckling. The introduction of stiffeners in both directions considerably increases the buckling st...

  5. Wordplay, mindplay: Fan fiction and postclassical narratology

    Directory of Open Access Journals (Sweden)

    Veerle Van Steenhuyse

    2014-09-01

    Full Text Available Recent narrative theories on story worlds, or the worlds evoked by narratives, call attention to the process of fan reading and the role which the canon plays in that process. This paper posits that such theories can help us understand literary techniques that make a difference on the level of the reading experience that is implied by fan fiction texts. This is illustrated with a close reading of Naguabo's "The Mother of All Marriage Proposals," a Jane Austen fic.

  6. Integral Compressor/Generator/Fan Unitary Structure

    OpenAIRE

    Dreiman, Nelik

    2016-01-01

    INTEGRAL COMPRESSOR / GENERATOR / FAN UNITARY STRUCTURE.*) Dr. Nelik Dreiman Consultant, P.O.Box 144, Tipton, MI E-mail: An extremely compact, therefore space saving single compressor/generator/cooling fan structure of short axial length and light weight has been developed to provide generation of electrical power with simultaneous operation of the compressor when power is unavailable or function as a regular AC compressor powered by a power line. The generators and ai...

  7. Fan affinity laws from a collision model

    CERN Document Server

    Bhattacharjee, Shayak

    2012-01-01

    The performance of a fan is usually estimated from hydrodynamical considerations. The calculations are long and involved and the results are expressed in terms of three affinity laws. In this work we use kinetic theory to attack this problem. A hard sphere collision model is used, and subsequently a correction to account for the flow behaviour of air is incorporated. Our calculations prove the affinity laws and provide numerical estimates of the air delivery, thrust and drag on a rotating fan.

  8. Aerodynamic modelling and optimization of axial fans

    Energy Technology Data Exchange (ETDEWEB)

    Noertoft Soerensen, Dan

    1998-01-01

    A numerically efficient mathematical model for the aerodynamics of low speed axial fans of the arbitrary vortex flow type has been developed. The model is based on a blade-element principle, whereby the rotor is divided into a number of annular stream tubes. For each of these stream tubes relations for velocity, pressure and radial position are derived from the conservation laws for mass, tangential momentum and energy. The equations are solved using the Newton-Raphson methods, and solutions converged to machine accuracy are found at small computing costs. The model has been validated against published measurements on various fan configurations, comprising two rotor-only fan stages, a counter-rotating fan unit and a stator-rotor stator stage. Comparisons of local and integrated properties show that the computed results agree well with the measurements. Optimizations have been performed to maximize the mean value of fan efficiency in a design interval of flow rates, thus designing a fan which operates well over a range of different flow conditions. The optimization scheme was used to investigate the dependence of maximum efficiency on 1: the number of blades, 2: the width of the design interval and 3: the hub radius. The degree of freedom in the choice of design variable and constraints, combined with the design interval concept, provides a valuable design-tool for axial fans. To further investigate the use of design optimization, a model for the vortex shedding noise from the trailing edge of the blades has been incorporated into the optimization scheme. The noise emission from the blades was minimized in a flow rate design point. Optimizations were performed to investigate the dependence of the noise on 1: the number of blades, 2: a constraint imposed on efficiency and 3: the hub radius. The investigations showed, that a significant reduction of noise could be achieved, at the expense of a small reduction in fan efficiency. (EG) 66 refs.

  9. SSN 774 Virginia Class Submarine (SSN 774)

    Science.gov (United States)

    2015-12-01

    increasing performance capabilities more than eleven years after lead ship delivery in October 2004. With the delivery to the Navy of USS JOHN WARNER (SSN...of VIRGINIA Class Submarines are highlighted by the Commissioning of USS JOHN WARNER (SSN 785) at Norfolk Naval Shipyard on August 1, 2015 and the...significant production milestone with the completion of her pressure hull on August 29, 2015. Other near term VIRGINIA Class program events include Pre

  10. Using Ice Predictions to Guide Submarines

    Science.gov (United States)

    2016-01-01

    prevented the use of several airfields used for transporting personnel and equipment to the ice camp. The rapidly changing conditions of the ice ...of the ice cover. The age of the sea ice serves as an indicator of its physical properties including surface roughness, melt pond coverage, and...Sailors and members of the Applied Physics Laboratory Ice Station clear ice from the hatch of the submarine USS Connecticut (SSN 22) during Ice

  11. Radiated noise of ducted fans

    Science.gov (United States)

    Eversman, Walter

    The differences in the radiated acoustic fields of ducted and unducted propellers of the same thrust operating under similar conditions are investigated. An FEM model is created for the generation, propagation, and radiation of steady, rotor alone noise and exit guide vane interaction noise of a ducted fan. For a specified number of blades, angular mode harmonic, and rotor angular velocity, the acoustic field is described in a cylindrical coordinate system reduced to only the axial and radial directions. It is found that, contrary to the usual understanding of the Tyler and Sofrin (1962) result, supersonic tip speed rotor noise can be cut off if the tip Mach number is only slightly in excess of unity and if the number of blades is relatively small. If there are many blades, the fundamental angular mode number is large, and the Tyler and Sofrin result for thin annuli becomes more relevant. Shrouding of subsonic tip speed propellers is a very effective means of controlling rotor alone noise.

  12. Decontamination and Decommissioned Small Nuclear AIP Hybrid Systems Submarines

    Directory of Open Access Journals (Sweden)

    Guangya Liu

    2013-11-01

    Full Text Available Being equipped with small reactor AIP is the trend of conventional submarine power in 21st century as well as a real power revolution in conventional submarine. Thus, the quantity of small reactor AIP Submarines is on the increase, and its decommissioning and decontamination will also become a significant international issue. However, decommissioning the small reactor AIP submarines is not only a problem that appears beyond the lifetime of the small reactor nuclear devices, but the problem involving the entire process of design, construction, running and closure. In the paper, the problem is explored based on the conception and the feasible decommissioning and decontamination means are supplied to choose from.

  13. Palynofacies reveal fresh terrestrial organic matter inputs in the terminal lobes of the Congo deep-sea fan

    Science.gov (United States)

    Schnyder, Johann; Stetten, Elsa; Baudin, François; Pruski, Audrey M.; Martinez, Philippe

    2017-08-01

    The Congo deep-sea fan is directly connected to the Congo River by a unique submarine canyon. The Congo River delivers up to 2×1012gPOC/yr, a part of which is funnelled by the submarine canyon and feeds the deep-sea environments. The more distal part of the Congo deep-sea fan, the terminal lobe area, has a surface of 2500 km2 and is situated up to 800 km offshore at depths of 4750-5000 m. It is a remarkable place to study the fate and distribution of the organic matter transferred from the continent to the deep ocean via turbidity currents. Forty-two samples were analyzed from the terminal lobes, including sites from the active channel, one of its levees and an abandoned distal channel. Samples were collected using multitube cores and push-cores using a Victor 6000 ROV, which surveyed the dense chemosynthetic habitats that locally characterize the terminal lobes. Palynofacies reveal a remarkably well-preserved, dominantly terrestrial particulate organic matter assemblage, that has been transferred from the continent into the deep-sea by turbidity currents. Delicate plant structures, cuticle fragments and plant cellular material is often preserved, highlighting the efficiency of turbidity currents to transfer terrestrial organic matter to the sea-floor, where it is preserved. Moreover, the palynofacies data reveal a general sorting by density or buoyancy of the organic particles, as the turbulent currents escaped the active channel, feeding the levees and the more distal, abandoned channel area. Finally, in addition to aforementioned hydrodynamic factors controlling the organic matter accumulation, a secondary influence of chemosynthetic habitats on organic matter preservation is also apparent. Palynofacies is therefore a useful tool to record the distribution of organic matter in recent and ancient deep-sea fan environments, an important topic for both academic and petroleum studies.

  14. The Connemara Fan: a major glacial grounding line fan west of Ireland

    Science.gov (United States)

    McCarron, Stephen; Praeg, Daniel; Monteys, Xavier; Scott, Gill

    2014-05-01

    Glacigenic topography on the mid-shelf (~130-350 m water depth) west of Galway, Ireland appears to have the morphological form, internal architecture and sediments associated with a large glacial grounding-line fan. Seismic data collected in 2009 and 2012 (during the GLAMAR and GATEWAYS 1 campaigns) reveal that the broad, arcuate ridges of the 'Olex moraine' form the landward part of a fan system which prograded beyond the mid-shelf break (defining the outer margin of the 'Clare Platform') westwards into the Porcupine Seabight. The topography is comparable to larger shelf-edge trough-mouth fans found further north along the same margin, however no discernible 'trough' has been identified on the Clare Platform. The ridge and fan topographic assemblage is renamed the 'Connemara Fan' in its entirety, based on its genetic relations and geographic location due west of Connemara, western Ireland. A macrofossil recovered from within a debris flow on the outer fan slope comprised of remobilised plumites dates to ~ 20 ka Cal B.P., indicating sediment reworking downslope following deglacial sediment input to at least that time. The Connemara Fan is the most southerly glacigenic fan identified along the north-east Atlantic margin. Its identification also adds to our knowledge of possibly multiple generations of ice sheets feeding onto the Irish shelf from west-central Ireland and the occurrence of ice sheet geometries and dynamics that evacuated ice, melt-water and sediment (ice streams?) westwards across the Clare Platform during past glaciations.

  15. Fan relationship management in football - going beyond traditional product offerings to win the hearts of fans

    DEFF Research Database (Denmark)

    Cortsen, Kenneth

    2015-01-01

    The management and control of fan relations should go beyond a football club’s traditional product and service offerings and touch the important experiential side of the football economy. This will create a stronger platform to optimize ROI, ROE and ROO relating to different fan segments....

  16. Novel Crosstalk Measurement Method for Multi-Core Fiber Fan-In/Fan-Out Devices

    DEFF Research Database (Denmark)

    Ye, Feihong; Ono, Hirotaka; Abe, Yoshiteru;

    2016-01-01

    We propose a new crosstalk measurement method for multi-core fiber fan-in/fan-out devices utilizing the Fresnel reflection. Compared with the traditional method using core-to-core coupling between a multi-core fiber and a single-mode fiber, the proposed method has the advantages of high reliabili...

  17. Sedimentary processes of the lower Monterey Fan channel and channel-mouth lobe

    Science.gov (United States)

    Klaucke, I.; Masson, D.G.; Kenyon, Neil H.; Gardner, J.V.

    2004-01-01

    The distribution of deposits, sediment transport pathways and processes on the lower Monterey Fan channel and channel-mouth lobe (CML) are studied through the integration of GLORIA and TOBI sidescan sonar data with 7-kHz subbottom profiler records and sediment cores for ground-truthing. The lower Monterey channel is characterised by an up to 30-m-deep channel with poorly developed levees and alternating muddy and silty muddy overbank deposits. The channel is discontinuous, disappearing where gradients are less than about 1:350. Ground-truthing of the large CML shows that the entire CML is characterised by widespread deposits of generally fine sand, with coarser sand at the base of turbidites. Sand is particularly concentrated in finger-like areas of low-backscatter intensity and is interpreted as the result of non-turbulent sediment-gravity flows depositing metres thick massive, fine sand. TOBI sidescan sonar data reveal recent erosional features in the form of scours, secondary channels, large flow slides, and trains of blocks at the distal end of the CML. Erosion is probably related to increasing gradient as the CML approaches Murray Fracture zone and to differential loading of sandy submarine fan deposits onto pelagic clays. Reworking of older flow slides by sediment transport processes on the lobe produces trains of blocks that are several metres in diameter and aligned parallel to the flow direction. ?? 2004 Elsevier B.V. All rights reserved.

  18. 32 CFR 707.7 - Submarine identification light.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Submarine identification light. 707.7 Section... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.7 Submarine identification light... off-period. The light will be located where it can best be seen, as near as practicable, all...

  19. Three dimensional boundary layers on submarine conning towers and rudders

    Science.gov (United States)

    Gleyzes, C.

    1988-01-01

    Solutions for the definition of grids adapted to the calculation of three-dimensional boundary layers on submarine conning towers and on submarine rudders and fins are described. The particular geometry of such bodies (oblique shaped hull, curved fins) required special adaptations. The grids were verified on examples from a test basin.

  20. Monitoring of radioactivity at the Russian nuclear submarine Kursk

    Energy Technology Data Exchange (ETDEWEB)

    Amundsen, I. [Norwegian Radiation Protection Authority, Oesteraes (Norway); Lind, B. [Norwegian Radiation Protection Authority, Enviromental Protection Unit, Polar Environmental Centre, Tromsoe (Norway)

    2002-04-01

    In the morning of August 12th 2000, a Russian submarine accident occurred in international waters east of Rybatschi Peninsula in the Barents Sea about 250 km from Norway. The submarine, a Russian Oscar class II attack submarine, sunk to 116 meters depth at the position 69 deg. 36,99N, 37 deg. 34,50E. The submarine 'Kursk' is 154 meters long, equipped with two pressurised water reactors and the submerged displacement is 24000 tons. Each reactor has a thermal effect or 190 megawatt, or less than 10% of a typical nuclear power plant reactor. The submarines in Oscar-II class is one of the largest and most capable in the Russian Northern Fleet. No indications of leakage from the submarine have so far been observed during the monitoring expeditions. Elevated levels of radioactivity have note been detected in any dose-rate readings or at any of the measurements of environmental samples taken close to Kursk. Furthermore, no increased levels were measured on bits and pieces from the submarine or from water sampled inside the submarine. A more comprehensive report covering experience and monitoring results from the two expeditions term and impact assessments of possible future releases from Kursk. (LN)

  1. Design Guidelines for Quiet Fans and Pumps for Space Vehicles

    Science.gov (United States)

    Lovell, John S.; Magliozzi, Bernard

    2008-01-01

    This document presents guidelines for the design of quiet fans and pumps of the class used on space vehicles. A simple procedure is presented for the prediction of fan noise over the meaningful frequency spectrum. A section also presents general design criteria for axial flow fans, squirrel cage fans, centrifugal fans, and centrifugal pumps. The basis for this report is an experimental program conducted by Hamilton Standard under NASA Contract NAS 9-12457. The derivations of the noise predicting methods used in this document are explained in Hamilton Standard Report SVHSER 6183, "Fan and Pump Noise Control," dated May 1973 (6).

  2. Numerical Aerodynamic Evaluation and Noise Investigation of a Bladeless Fan

    OpenAIRE

    mohammad jafari; Hossein Afshin; Bijan Farhanieh; Hamidreza bozorgasareh

    2015-01-01

    Bladeless fan is a novel fan type that has no observable impeller, usually used for domestic applications. Numerical investigation of a Bladeless fan via Finite Volume Method was carried out in this study. The fan was placed in center of a 4×2×2m room and 473 Eppler airfoil profile was used as cross section of the fan. Performance and noise level of the fan by solving continuity and momentum equations as well as noise equations of Broadband Noise Source (BNS) and Ffowcs Williams a...

  3. NUMERICAL PREDICTION OF SUBMARINE HYDRODYNAMIC COEFFICIENTS USING CFD SIMULATION

    Institute of Scientific and Technical Information of China (English)

    PAN Yu-cun; ZHANG Huai-xin; ZHOU Qi-dou

    2012-01-01

    The submarine Hydrodynamic coefficients are predicted by numerical simulations.Steady and unsteady Reynolds Averaged Navier-Stokes (RANS) simulations are carried out to numerically simulate the oblique towing experiment and the Planar Motion Mechanism (PMM) experiment performed on the SUBOFF submarine model.The dynamic mesh method is adopted to simulate the maneuvering motions of pure heaving,pure swaying,pure pitching and pure yawing.The hydrodynamic forces and moments acting on the maneuvering submarine are obtained.Consequently,by analyzing these results,the hydrodynamic coefficients of the submarine maneuvering motions can be determined.The computational results are verified by comparison with experimental data,which show that this method can be used to estimate the hydrodynamic derivatives of a fully appended submarine.

  4. Experimental Study on Free Spanning Submarine Pipeline Under Dynamic Excitation

    Institute of Scientific and Technical Information of China (English)

    李昕; 刘亚坤; 周晶; 马恒春; 朱彤

    2002-01-01

    Seismic load has a significant effect on the response of a free spanning submarine pipeline when the pipeline is constructed in a seismically active region. The model experiment is performed on an underwater shaking table to simulate the response of submarine pipelines under dynamic input. In consideration of the effects of the terrestrial and submarine pipeline, water depth, support condition, distance from seabed, empty and full pipeline, and span on dynamic response, 120 groups of experiments are conducted. Affecting factors are analyzed and conclnsions are drawn for reference. For the control of dynamic response, the span of a submarine pipeline is by far more important than the other factors. Meanwhile, the rosponse difference between a submarine pipeline under sine excitation and that under random excitation exists in experiments.

  5. The 1929 Grand Banks submarine landslide revisited

    Science.gov (United States)

    Schulten, Irena; Mosher, David C.; Krastel, Sebastian; Piper, David J. W.; Kienast, Markus

    2017-04-01

    On November 18th, 1929 a large submarine landslide occurred along the St. Pierre Slope of the southwestern Grand Banks of Newfoundland, as a result of a Mw 7.2 earthquake. This submarine landslide led to the first recognition of naturally-occurring submarine turbidity currents and is one of the few landslides known to have generated a tsunami. The event caused 28 causalities in Newfoundland and severe infrastructural damage. Earlier investigations of the area identified widely distributed shallow mass failures (15 - 20 m high escarpments), but no evidence of a larger headscarp. It is difficult to conceive, therefore, how this distributed shallow failure that rapidly evolved into a turbidity current would have generated a tsunami. It is hypothesised in this study that a deeper rooted sediment failure ( 500 m), involving faulting and mass-rotation, was involved in the sediment failure and this displacement generated the tsunami. In order to test this hypothesis, the volume and kinematics of the 1929 slope failure are analysed by means of recently acquired high resolution seismic reflection and multibeam swath bathymetry data, in addition to a significant volume of legacy data. The data allow determination of: 1) the dimension of the failure area, 2) the thickness and volume of failed sediment on St. Pierre Slope, 3) fault patterns and displacements, and 4) styles of sediment failure involved. Shallow (20 m high) sinuous escarpments and a number of faults are observed along the upper St. Pierre Slope (500 - 2 500 m water depth). The uppermost and largest of these escarpments shows association with a fault system. Preliminary results, therefore, indicate a complex sediment failure pattern along the St. Pierre Slope, possibly involving a deep-seated decollement and mobilization of a large volume of surficial sediment through retrogressive failure. Causes for the tsunami are yet to be determined.

  6. Submarine harbor navigation using image data

    Science.gov (United States)

    Stubberud, Stephen C.; Kramer, Kathleen A.

    2017-01-01

    The process of ingress and egress of a United States Navy submarine is a human-intensive process that takes numerous individuals to monitor locations and for hazards. Sailors pass vocal information to bridge where it is processed manually. There is interest in using video imaging of the periscope view to more automatically provide navigation within harbors and other points of ingress and egress. In this paper, video-based navigation is examined as a target-tracking problem. While some image-processing methods claim to provide range information, the moving platform problem and weather concerns, such as fog, reduce the effectiveness of these range estimates. The video-navigation problem then becomes an angle-only tracking problem. Angle-only tracking is known to be fraught with difficulties, due to the fact that the unobservable space is not the null space. When using a Kalman filter estimator to perform the tracking, significant errors arise which could endanger the submarine. This work analyzes the performance of the Kalman filter when angle-only measurements are used to provide the target tracks. This paper addresses estimation unobservability and the minimal set of requirements that are needed to address it in this complex but real-world problem. Three major issues are addressed: the knowledge of navigation beacons/landmarks' locations, the minimal number of these beacons needed to maintain the course, and update rates of the angles of the landmarks as the periscope rotates and landmarks become obscured due to blockage and weather. The goal is to address the problem of navigation to and from the docks, while maintaining the traversing of the harbor channel based on maritime rules relying solely on the image-based data. The minimal number of beacons will be considered. For this effort, the image correlation from frame to frame is assumed to be achieved perfectly. Variation in the update rates and the dropping of data due to rotation and obscuration is considered

  7. Optimism Bias in Fans and Sports Reporters.

    Directory of Open Access Journals (Sweden)

    Bradley C Love

    Full Text Available People are optimistic about their prospects relative to others. However, existing studies can be difficult to interpret because outcomes are not zero-sum. For example, one person avoiding cancer does not necessitate that another person develops cancer. Ideally, optimism bias would be evaluated within a closed formal system to establish with certainty the extent of the bias and the associated environmental factors, such that optimism bias is demonstrated when a population is internally inconsistent. Accordingly, we asked NFL fans to predict how many games teams they liked and disliked would win in the 2015 season. Fans, like ESPN reporters assigned to cover a team, were overly optimistic about their team's prospects. The opposite pattern was found for teams that fans disliked. Optimism may flourish because year-to-year team results are marked by auto-correlation and regression to the group mean (i.e., good teams stay good, but bad teams improve.

  8. Optimism Bias in Fans and Sports Reporters.

    Science.gov (United States)

    Love, Bradley C; Kopeć, Łukasz; Guest, Olivia

    2015-01-01

    People are optimistic about their prospects relative to others. However, existing studies can be difficult to interpret because outcomes are not zero-sum. For example, one person avoiding cancer does not necessitate that another person develops cancer. Ideally, optimism bias would be evaluated within a closed formal system to establish with certainty the extent of the bias and the associated environmental factors, such that optimism bias is demonstrated when a population is internally inconsistent. Accordingly, we asked NFL fans to predict how many games teams they liked and disliked would win in the 2015 season. Fans, like ESPN reporters assigned to cover a team, were overly optimistic about their team's prospects. The opposite pattern was found for teams that fans disliked. Optimism may flourish because year-to-year team results are marked by auto-correlation and regression to the group mean (i.e., good teams stay good, but bad teams improve).

  9. ANALYTICAL METHODS FOR CALCULATING FAN AERODYNAMICS

    Directory of Open Access Journals (Sweden)

    Jan Dostal

    2015-12-01

    Full Text Available This paper presents results obtained between 2010 and 2014 in the field of fan aerodynamics at the Department of Composite Technology at the VZLÚ aerospace research and experimental institute in Prague – Letnany. The need for rapid and accurate methods for the preliminary design of blade machinery led to the creation of a mathematical model based on the basic laws of turbomachine aerodynamics. The mathematical model, the derivation of which is briefly described below, has been encoded in a computer programme, which enables the theoretical characteristics of a fan of the designed geometry to be determined rapidly. The validity of the mathematical model is assessed continuously by measuring model fans in the measuring unit, which was developed and manufactured specifically for this purpose. The paper also presents a comparison between measured characteristics and characteristics determined by the mathematical model as the basis for a discussion on possible causes of measured deviations and calculation deviations.

  10. Fan Noise Source Diagnostic Test: Rotor Alone Aerodynamic Performance Results

    Science.gov (United States)

    Hughes, Christopher E.; Jeracki, Robert J.; Woodward, Richard P.; Miller, Christopher J.

    2005-01-01

    The aerodynamic performance of an isolated fan or rotor alone model was measured in the NASA Glenn Research Center 9- by 15- Foot Low Speed Wind Tunnel as part of the Fan Broadband Source Diagnostic Test conducted at NASA Glenn. The Source Diagnostic Test was conducted to identify the noise sources within a wind tunnel scale model of a turbofan engine and quantify their contribution to the overall system noise level. The fan was part of a 1/5th scale model representation of the bypass stage of a current technology turbofan engine. For the rotor alone testing, the fan and nacelle, including the inlet, external cowl, and fixed area fan exit nozzle, were modeled in the test hardware; the internal outlet guide vanes located behind the fan were removed. Without the outlet guide vanes, the velocity at the nozzle exit changes significantly, thereby affecting the fan performance. As part of the investigation, variations in the fan nozzle area were tested in order to match as closely as possible the rotor alone performance with the fan performance obtained with the outlet guide vanes installed. The fan operating performance was determined using fixed pressure/temperature combination rakes and the corrected weight flow. The performance results indicate that a suitable nozzle exit was achieved to be able to closely match the rotor alone and fan/outlet guide vane configuration performance on the sea level operating line. A small shift in the slope of the sea level operating line was measured, which resulted in a slightly higher rotor alone fan pressure ratio at take-off conditions, matched fan performance at cutback conditions, and a slightly lower rotor alone fan pressure ratio at approach conditions. However, the small differences in fan performance at all fan conditions were considered too small to affect the fan acoustic performance.

  11. Experimental alluvial fans: Advances in understanding of fan dynamics and processes

    Science.gov (United States)

    Clarke, Lucy E.

    2015-09-01

    Alluvial fans are depositional systems that develop because of a disparity between the upstream and downstream sediment transport capacity of a system, usually at the base of mountain fronts as rivers emerge from the constrained mountain area onto the plain. They are dynamic landforms that are prone to abrupt changes on a geomorphological (decades to centuries) time scale, while also being long-term deposition features that preserve sedimentary strata and are sensitive indictors of environmental change. The complexity of interactions between catchment characteristics, climate, tectonics, internal system feedbacks, and environmental processes on field alluvial fans means that it is difficult to isolate individual variables in a field setting; therefore, the controlled conditions afforded by experimental models has provided a novel technique to overcome some of these complexities. The use of experimental models of alluvial fans has a long history and these have been implemented over a range of different research areas utilising various experimental designs. Using this technique, important advances have been made in determining the primary factors influencing fan slope, understanding of avulsion dynamics, identifying autogenic processes driving change on fan systems independent of any change in external conditions, and the mechanics of flow and flood risk on alluvial fans, to name a few. However, experiments cannot be carried out in isolation. Thus, combining the findings from experimental alluvial fans with field research and numerical modelling is important and, likewise, using these techniques to inform experimental design. If this can be achieved, there is potential for future experimental developments to explore key alluvial fan issues such as stratigraphic preservation potential and simulating extra terrestrial fan systems.

  12. Homophobia, heteronormativity, and slash fan fiction

    Directory of Open Access Journals (Sweden)

    April S. Callis

    2016-09-01

    Full Text Available I analyze the relationship between homophobia/heteronormativity and slash fan fiction. Through reading and coding almost 6,000 pages of Kirk/Spock fan fiction written from 1978 to 2014, I illuminate shifts in how normative gender and sexuality are portrayed by K/S authors. Writers of K/S, while ostensibly writing about the 23rd century, consciously or unconsciously include cultural norms from the 20th and 21st centuries. Thus, slash becomes a lens through which readers can view a decrease in both homophobia and heteronormativity in US culture over the past several decades.

  13. Fan fiction metadata creation and utilization within fan fiction archives: Three primary models

    Directory of Open Access Journals (Sweden)

    Shannon Fay Johnson

    2014-09-01

    Full Text Available Issues related to searchability and ease of access have plagued fan fiction since its inception. This paper discusses the predominate forms of fan-mediated indexing and descriptive metadata, commonly referred to as folksonomy or tagging, and compares the benefits and disadvantages of each model. These models fall into three broad categories: free tagging, controlled vocabulary, and hybrid folksonomy. Each model has distinct advantages and shortcomings related to findability, results filtering, and creative empowerment. Examples for each are provided. Possible ramifications to fan fiction from improved metadata and access are also discussed.

  14. Experiencing fan activism: Understanding the power of fan activist organizations through members' narratives

    Directory of Open Access Journals (Sweden)

    Neta Kligler-Vilenchik

    2012-06-01

    Full Text Available Fan activism, forms of civic engagement and political participation growing out of experiences of fandom, is a powerful mode of mobilization, particularly for young people. Building on 40 interviews with members of two organizations representing different configurations of fan activism, this article discusses three emerging elements that are key to the experience of membership in such groups. We suggest that the strength of fan activist groups builds on successfully combining these elements: two that are common to fandom, shared media experiences and a sense of community, and one that is traditionally ascribed to volunteerism and activism, the wish to help.

  15. Alluvial Fan Study Submission for UMATILLA COUNTY, OREGON

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Alluvial fan study data as defined in FEMA Guidelines and Specifications, Appendix G: Guidance for Alluvial Fan Flooding Analyses and Mapping

  16. Improving Fan System Performance: A Sourcebook for Industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-04-01

    This is one of a series of sourcebooks on motor-driven equipment produced by the Industrial Technologies Program. It provides a reference for industrial fan systems users, outlining opportunities to improve fan system performance.

  17. Gas hydrate dissociation structures in submarine slopes

    Energy Technology Data Exchange (ETDEWEB)

    Gidley, I.; Grozic, J.L.H. [Calgary Univ., AB (Canada). Dept. of Civil Engineering

    2008-07-01

    Studies have suggested that gas hydrates may play a role in submarine slope failures. However, the mechanics surrounding such failures are poorly understood. This paper discussed experimental tests conducted on a small-scale physical model of submarine soils with hydrate inclusions. The laboratory tests investigated the effects of slope angle and depth of burial of the hydrate on gas escape structures and slope stability. Laponite was used to model the soils due to its ability to swell and produce a clear, colorless thixotropic gel when dispersed in water. An R-11 refrigerant was used to form hydrate layers and nodules. The aim of the experiment was to investigate the path of the fluid escape structures and the development of a subsequent slip plane caused by the dissociation of the R-11 hydrates. Slope angles of 5, 10, and 15 degrees were examined. Slopes were examined using high-resolution, high-speed imaging techniques. Hydrate placement and slope inclinations were varied in order to obtain stability data. Results of the study showed that slope angle influenced the direction of travel of the escaping gas, and that the depth of burial affected sensitivity to slope angle. Theoretical models developed from the experimental data have accurately mapped deformations and stress states during testing. Further research is being conducted to investigate the influence of the size, shape, and placement of the hydrates. 30 refs., 15 figs.

  18. Flow dynamics around downwelling submarine canyons

    Directory of Open Access Journals (Sweden)

    J. M. Spurgin

    2014-05-01

    Full Text Available Flow dynamics around a downwelling submarine canyon were analysed with the Massachusetts Institute of Technology general circulation model. Blanes Canyon (Northwest Mediterranean was used for topographic and initial forcing conditions. Fourteen scenarios were modelled with varying forcing conditions. Rossby number and Burger number were used to determine the significance of Coriolis acceleration and stratification (respectively and their impacts on flow dynamics. A new non-dimensional parameter (χ was introduced to determine the significance of vertical variations in stratification. Some simulations do see brief periods of upwards displacement of water during the 10 day model period, however, the presence of the submarine canyon is found to enhance downwards advection of density in all model scenarios. High Burger numbers lead to negative vorticity and a trapped anticyclonic eddy within the canyon, as well as an increased density anomaly. Low Burger numbers lead to positive vorticity, cyclonic circulation and weaker density anomalies. Vertical variations in stratification affect zonal jet placement. Under the same forcing conditions, the zonal jet is pushed offshore in more uniformly stratified domains. Offshore jet location generates upwards density advection away from the canyon, while onshore jets generate downwards density advection everywhere within the model domain. Increasing Rossby values across the canyon axis, as well as decreasing Burger values, increase negative vertical flux at shelf break depth (150 m. Increasing Rossby numbers lead to stronger downwards advection of a passive tracer (nitrate as well as stronger vorticity within the canyon. Results from previous studies were explained within this new dynamic framework.

  19. Flow dynamics around downwelling submarine canyons

    Directory of Open Access Journals (Sweden)

    J. M. Spurgin

    2014-10-01

    Full Text Available Flow dynamics around a downwelling submarine canyon were analysed with the Massachusetts Institute of Technology general circulation model. Blanes Canyon (northwestern Mediterranean was used for topographic and initial forcing conditions. Fourteen scenarios were modelled with varying forcing conditions. Rossby and Burger numbers were used to determine the significance of Coriolis acceleration and stratification (respectively and their impacts on flow dynamics. A new non-dimensional parameter (χ was introduced to determine the significance of vertical variations in stratification. Some simulations do see brief periods of upwards displacement of water during the 10-day model period; however, the presence of the submarine canyon is found to enhance downwards advection of density in all model scenarios. High Burger numbers lead to negative vorticity and a trapped anticyclonic eddy within the canyon, as well as an increased density anomaly. Low Burger numbers lead to positive vorticity, cyclonic circulation, and weaker density anomalies. Vertical variations in stratification affect zonal jet placement. Under the same forcing conditions, the zonal jet is pushed offshore in more uniformly stratified domains. The offshore jet location generates upwards density advection away from the canyon, while onshore jets generate downwards density advection everywhere within the model domain. Increasing Rossby values across the canyon axis, as well as decreasing Burger values, increase negative vertical flux at shelf break depth (150 m. Increasing Rossby numbers lead to stronger downwards advection of a passive tracer (nitrate, as well as stronger vorticity within the canyon. Results from previous studies are explained within this new dynamic framework.

  20. Flow dynamics around downwelling submarine canyons

    Science.gov (United States)

    Spurgin, J. M.; Allen, S. E.

    2014-10-01

    Flow dynamics around a downwelling submarine canyon were analysed with the Massachusetts Institute of Technology general circulation model. Blanes Canyon (northwestern Mediterranean) was used for topographic and initial forcing conditions. Fourteen scenarios were modelled with varying forcing conditions. Rossby and Burger numbers were used to determine the significance of Coriolis acceleration and stratification (respectively) and their impacts on flow dynamics. A new non-dimensional parameter (χ) was introduced to determine the significance of vertical variations in stratification. Some simulations do see brief periods of upwards displacement of water during the 10-day model period; however, the presence of the submarine canyon is found to enhance downwards advection of density in all model scenarios. High Burger numbers lead to negative vorticity and a trapped anticyclonic eddy within the canyon, as well as an increased density anomaly. Low Burger numbers lead to positive vorticity, cyclonic circulation, and weaker density anomalies. Vertical variations in stratification affect zonal jet placement. Under the same forcing conditions, the zonal jet is pushed offshore in more uniformly stratified domains. The offshore jet location generates upwards density advection away from the canyon, while onshore jets generate downwards density advection everywhere within the model domain. Increasing Rossby values across the canyon axis, as well as decreasing Burger values, increase negative vertical flux at shelf break depth (150 m). Increasing Rossby numbers lead to stronger downwards advection of a passive tracer (nitrate), as well as stronger vorticity within the canyon. Results from previous studies are explained within this new dynamic framework.

  1. Depositional characteristics of Suvero submarine slide, Paola Slope basin, eastern Tyrrhenian margin

    Energy Technology Data Exchange (ETDEWEB)

    Trincardi, F.; Normark, W.R. (Istituto per la Geologia Marina, Bologna (Italy))

    1988-08-01

    The Suvero submarine slide covers an area of about 225 km{sup 2} in the Paola slope basin on the eastern Tyrrhenian margin. The shape and lateral extent of the deposit, investigated by means of 1 and 30-kJ Sparker seismic profiles, strongly reflect the topographic confinement between the steep uppermost continental slope and a morphologic barrier formed by a margin-parallel slope ridge. The slide is small when compared with similar features on large delta-fed submarine fans or other slope-rise examples, but it constitutes a major depositional event relative to the size of the slope basin. No headwall and slide slip surface comparable in size with the slide deposit were found, suggesting that a significant part of the material flooring the slope basin became involved in the deformation and experienced some short-distance transport or internal shearing in response to a relatively small downslope-moving slide. The presence of small-relief ramps, over intervals of many kilometers, along the otherwise flat basal contact seems to indicate some strength and cohesion of the material involved. The development of a deep scour, localized where the regional gradient decreases from the steep upper slope to the flat basin floor, is also consistent with the occurrence of in-situ deformation of underconsolidated sediments. The source area of the slide deposit lies in a margin sector where uplift was particularly effect during Pleistocene time (1 mm/year), causing the presence of steep upper-slope gradients and the generation of other small-scale creep and failure events.

  2. Fan action and political participation on "The Colbert Report"

    Directory of Open Access Journals (Sweden)

    Marcus Schulzke

    2012-06-01

    Full Text Available The Colbert Report merges the increasingly popular political satire genre with fan activism. The result is that the fan community helps to construct Colbert's malleable character and demonstrates symbolic power through its willingness to act. The fans are usually a nonpartisan force, acting to produce entertainment rather than substantive political change. However, this can be politically meaningful, as the fans' projects promote collective action, parallel political activities like voting and protesting, and encourage critical thinking about political information.

  3. What threat do turbidity currents and submarine landslides pose to submarine telecommunications cable infrastructure?

    Science.gov (United States)

    Clare, Michael; Pope, Edward; Talling, Peter; Hunt, James; Carter, Lionel

    2016-04-01

    The global economy relies on uninterrupted usage of a network of telecommunication cables on the seafloor. These submarine cables carry ~99% of all trans-oceanic digital data and voice communications traffic worldwide, as they have far greater bandwidth than satellites. Over 9 million SWIFT banks transfers alone were made using these cables in 2004, totalling 7.4 trillion of transactions per day between 208 countries, which grew to 15 million SWIFT bank transactions last year. We outline the challenge of why, how often, and where seafloor cables are broken by natural causes; primarily subsea landslides and sediment flows (turbidity currents and also debris flows and hyperpycnal flows). These slides and flows can be very destructive. As an example, a sediment flow in 1929 travelled up to 19 m/s and broke 11 cables in the NE Atlantic, running out for ~800 km to the abyssal ocean. The 2006 Pingtung earthquake triggered a sediment flow that broke 22 cables offshore Taiwan over a distance of 450 km. Here, we present initial results from the first statistical analysis of a global database of cable breaks and causes. We first investigate the controls on frequency of submarine cable breaks in different environmental and geological settings worldwide. We assess which types of earthquake pose a significant threat to submarine cable networks. Meteorological events, such as hurricanes and typhoons, pose a significant threat to submarine cable networks, so we also discuss the potential impacts of future climate change on the frequency of such hazards. We then go on to ask what are the physical impacts of submarine sediment flows on submerged cables? A striking observation from past cable breaks is sometimes cables remain unbroken, whilst adjacent cables are severed (and record powerful flows travelling at up to 6 m/s). Why are some cables broken, but neighbouring cables remain intact? We provide some explanations for this question, and outline the need for future in

  4. Dead links, vaporcuts, and creativity in fan edit replication

    Directory of Open Access Journals (Sweden)

    Joshua Wille

    2015-09-01

    Full Text Available In my examination of a Star Wars prequel trilogy fan edit reportedly made by Topher Grace, I introduce the term vaporcut to describe fan edits with reputations that may generate critical discourse but that are not publicly released. I explore the ways some fan editors attempt to recreate intangible projects but inevitably produce variant works that reflect their own creative perspectives.

  5. Star Trek Rerun, Reread, Rewritten: Fan Writing as Textual Poaching.

    Science.gov (United States)

    Jenkins III, Henry

    1988-01-01

    Discusses women who write fiction and fan literature based on the "Star Trek" universe, outlining how Star Trek fans force the primary text to accommodate alternate interests. Also considers the issue of literary property in light of the moral economy of the fan community that shapes the range of permissible retellings of the program…

  6. A potential submarine landslide tsunami in South China Sea

    Science.gov (United States)

    Huang, Z.; Zhang, Y.; Switzer, A. D.

    2010-12-01

    Submarine earthquakes and submarine landslides are two main sources of tsunamis. Tsunami hazard modeling in the South China Sea has been primarily concerned with the potential large submarine earthquakes in the Manila trench. In contrast, evaluating the regional risk posed by tsunamis generated from submarine landslide is a new endeavor. At offshore south central Vietnam, bathymetric and seismic surveys show evidence of potentially tsunamigenic submarine landslides although their ages remain uncertain. We model two hypothetical submarine landslide events at a potential site on the heavily sediment laden, seismically active, steep continental slope offshore southeast Vietnam. Water level rises along the coast of Vietnam are presented for the potential scenarios, which indicate that the southeast coastal areas of Vietnam are at considerable risk of tsunami generated offshore submarine landslides. Key references: Kusnowidjaja Megawati, Felicia Shaw, Kerry Sieh, Zhenhua Huang, Tso-Ren Wu, Y. Lin, Soon Keat Tan and Tso-Chien Pan.(2009). Tsunami hazard from the subduction megathrust of the South China Sea, Part I, Source characterization and the resulting tsunami, Journal of Asian Earth Sciences, Vol. 36(1), pp. 13-20. Enet, F., Grilli, S.T. and Watts, P. (2003). Laboratory experiments for tsunami generated by underwater landslides: comparison with numerical modeling, In: Proceedings of 13th International Conference on Offshore and Polar Engineering, Honolulu, Hawaii, USA, pp. 372-379.

  7. Sound effects as a genre-defining factor in submarine films

    Directory of Open Access Journals (Sweden)

    Linda Maria Koldau

    2009-09-01

    Full Text Available Submarine films can be regarded as a genre with a specific semantic and syntactical structure that heavily depends on the acoustemological nature of submarine warfare. The sound design in submarine films therefore has decisive dramatic and emotive functions. The article presents the sound effects most specific to submarine films and discusses the creative potential they offer both as diegetic sounds bound to submarine existence and as emotive cues with an immediate effect on the audience.

  8. Fan Stall Flutter Flow Mechanism Studied

    Science.gov (United States)

    Lepicovsky, Jan

    2002-01-01

    Modern turbofan engines employ a highly loaded fan stage with transonic or low-supersonic velocities in the blade-tip region. The fan blades are often prone to flutter at off-design conditions. Flutter is a highly undesirable and dangerous self-excited mode of blade oscillations that can result in high-cycle fatigue blade failure. The origins of blade flutter are not fully understood yet. Experimental data that can be used to clarify the origins of blade flutter in modern transonic fan designs are very limited. The Transonic Flutter Cascade Facility at the NASA Glenn Research Center was developed to experimentally study the details of flow mechanisms associated with fan flutter. The cascade airfoils are instrumented to measure high-frequency unsteady flow variations in addition to the steady flow data normally recorded in cascade tests. The test program measures the variation in surface pressure in response to the oscillation of one or more of the cascade airfoils. However, during the initial phases of the program when all airfoils were in fixed positions, conditions were found where significant time variations in the pressures near the airfoil leading edges could be observed.

  9. Acoustic analysis of a computer cooling fan

    Science.gov (United States)

    Huang, Lixi; Wang, Jian

    2005-10-01

    Noise radiated by a typical computer cooling fan is investigated experimentally and analyzed within the framework of rotor-stator interaction noise using point source formulation. The fan is 9 cm in rotor casing diameter and its design speed is 3000 rpm. The main noise sources are found and quantified; they are (a) the inlet flow distortion caused by the sharp edges of the incomplete bellmouth due to the square outer framework, (b) the interaction of rotor blades with the downstream struts which hold the motor, and (c) the extra size of one strut carrying electrical wiring. Methods are devised to extract the rotor-strut interaction noise, (b) and (c), radiated by the component forces of drag and thrust at the leading and higher order spinning pressure modes, as well as the leading edge noise generated by (a). By re-installing the original fan rotor in various casings, the noises radiated by the three features of the original fan are separated, and details of the directivity are interpreted. It is found that the inlet flow distortion and the unequal set of four struts make about the same amount of noise. Their corrections show a potential of around 10-dB sound power reduction.

  10. Generalized sorting profile of alluvial fans

    Science.gov (United States)

    Miller, Kimberly Litwin; Reitz, Meredith D.; Jerolmack, Douglas J.

    2014-10-01

    Alluvial rivers often exhibit self-similar gravel size distributions and abrupt gravel-sand transitions. Experiments suggest that these sorting patterns are established rapidly, but how—and how fast—this convergence occurs in the field is unknown. We examine the establishment of downstream sorting patterns in a kilometer-scale alluvial fan. The sharp transition from canyon to unconfined, channelized fan provides a well-defined boundary condition. The channel changes from deep and entrenched at the fan apex to shallow and depositional over a short distance, exhibiting nonequilibrium behavior. The resulting gravel-fining profile is not self-similar; the particle size distribution narrows until approximate equal mobility is achieved. Downfan, the gravel-sand transition appears to exhibit a self-similar form; field and laboratory data collapse when downstream distance is normalized by the location of the transition. Results suggest a generalized sorting profile for alluvial fans as a consequence of the threshold of motion and nonequilibrium channels.

  11. Fan Affinity Laws from a Collision Model

    Science.gov (United States)

    Bhattacharjee, Shayak

    2012-01-01

    The performance of a fan is usually estimated using hydrodynamical considerations. The calculations are long and involved and the results are expressed in terms of three affinity laws. In this paper we use kinetic theory to attack this problem. A hard sphere collision model is used, and subsequently a correction to account for the flow behaviour…

  12. Test particle acceleration in torsional fan reconnection

    Science.gov (United States)

    Hosseinpour, M.

    2014-12-01

    Magnetic reconnection is understood to be a potential mechanism for particle acceleration in astrophysical and space plasmas, especially in solar flares. Torsional fan reconnection is one of the proposed mechanisms for steady-state three-dimensional (3D) magnetic reconnection. By using the magnetic and electric fields for `torsional fan reconnection', the features of test particle acceleration with input parameters for the solar corona are investigated numerically. We show that torsional fan reconnection is potentially an efficient particle accelerator and a proton can gain up to tens of MeV of kinetic energy within only a few milliseconds. Although the final kinetic energy of the accelerated particle depends on the injection position but there exists only one scenario for the particle's trajectory with different initial positions in which the particle is accelerated on the fan plane. Moreover, adopting either spatially uniform or non-uniform localized plasma resistivity does not much influence the features of trajectory. These results are compared with those of torsional spine reconnection.

  13. Fan Affinity Laws from a Collision Model

    Science.gov (United States)

    Bhattacharjee, Shayak

    2012-01-01

    The performance of a fan is usually estimated using hydrodynamical considerations. The calculations are long and involved and the results are expressed in terms of three affinity laws. In this paper we use kinetic theory to attack this problem. A hard sphere collision model is used, and subsequently a correction to account for the flow behaviour…

  14. Fan Ky不等式的一个新改进%A New Improvement of Fan Ky's Inequality

    Institute of Scientific and Technical Information of China (English)

    黄政; 高明哲; 徐景实

    2010-01-01

    利用Gram矩阵的正定性和可变单位向量建立了Fan Ky不等式的一个新的改进,并且建立了反向Fan Ky不等式.对于非奇异矩阵,得到了Fan Ky不等式以及反向Fan Ky不等式的推广.

  15. Recurrent Pleistocene sub-marine slide events on the south Vøring Plateau, mid-Norwegian continental margin

    Science.gov (United States)

    Hjelstuen, B.; Skaug, M.; Haflidason, H.

    2009-12-01

    Throughout the Pleistocene the sediment input and depositional environments on the continental slope off Norway have been strongly controlled by variability in the ocean circulation, glaciations and sea-level changes. Repeated occurrence of shelf edge glaciations along the whole NW European margin, from Ireland to Svalbard, started at Marine Isotope Stage 12 (c. 0.5 Ma). During these periods, fast moving ice streams crossed the continental shelf on a number of locations, and large submarine fans and prograding wedges accumulated on the continental slope. During glacial maximums and in the early phases of the deglaciations high sedimentation rates, >2000 cm/ka, characterised the Norwegian continental margin. Within these depositional environments more than 30 large-scale mass failures have been identified. Here, we report on three slide events on the south Vøring Plateau, on the mid-Norwegian margin. These slides have affected an area between 2900 and 12000 km2 and involved 580-2400 km3 of sediments, noting that the slide debrites left by the failure events reach a maximum thickness of c. 150 m. For comparison the Holocene Storegga Slide, considered the largest exposed sub-marine slide in the world today, mobilized c. 2500-3500 km3 of masses and affected an area of c. 95 000 km2. The Vøring Plateau sub-marine slides are most likely younger than 0.5 Ma, thus occurring in a time period of repeated ice sheet growth to the shelf edge and high accumulation rates. The failures have occurred within an area dominated by gradients less than 1 degree, and observation of long run-out distances indicate that hydroplaning was important during slide development. Our multichannel seismic profiles further show that gas hydrate bearing sediments are observed on the mid-Norwegian continental margin. Thus, dissociation of gas hydrates and high sedimentation rates may have promoted conditions for failures to occur.

  16. Regenerative Blower for EVA Suit Ventilation Fan

    Science.gov (United States)

    Izenson, Michael G.; Chen, Weibo; Paul, Heather L.

    2010-01-01

    Portable life support systems in future space suits will include a ventilation subsystem driven by a dedicated fan. This ventilation fan must meet challenging requirements for pressure rise, flow rate, efficiency, size, safety, and reliability. This paper describes research and development that showed the feasibility of a regenerative blower that is uniquely suited to meet these requirements. We proved feasibility through component tests, blower tests, and design analysis. Based on the requirements for the Constellation Space Suit Element (CSSE) Portable Life Support System (PLSS) ventilation fan, we designed the critical elements of the blower. We measured the effects of key design parameters on blower performance using separate effects tests, and used the results of these tests to design a regenerative blower that will meet the ventilation fan requirements. We assembled a proof-of-concept blower and measured its performance at sub-atmospheric pressures that simulate a PLSS ventilation loop environment. Head/flow performance and maximum efficiency point data were used to specify the design and operating conditions for the ventilation fan. We identified materials for the blower that will enhance safety for operation in a lunar environment, and produced a solid model that illustrates the final design. The proof-of-concept blower produced the flow rate and pressure rise needed for the CSSE ventilation subsystem while running at 5400 rpm, consuming only 9 W of electric power using a non-optimized, commercial motor and controller and inefficient bearings. Scaling the test results to a complete design shows that a lightweight, compact, reliable, and low power regenerative blower can meet the performance requirements for future space suit life support systems.

  17. Psychoacoustic study on contribution of fan noise to engine noise

    Science.gov (United States)

    Zhang, Junhong; Liu, Hai; Bi, Fengrong; Ni, Guangjian; Zhang, Guichang; Lin, Jiewei; Yu, Hanzhengnan

    2012-07-01

    There are more researches on engine fan noise control focusing on reducing fan noise level through optimizing fan structure, and a lot of research achievements have been obtained. However, researches on the effect of fan noise to engine noise quality are lacking. The influences of the effects of fan structure optimization on the engine noise quality are unclear. Thus, there will be a decline in fan noise level, but the deterioration of engine noise quality. Aiming at the above problems, in consideration of fan structure design and engine noise quality, an innovative method to analyze the contribution of fan noise to engine noise quality using psychoacoustic theory is proposed. The noises of diesel engine installing different cooling fans are measured by using the acoustic pressure method. The experiment results are regarded as analysis samples. The model of sensory pleasantness is used to analyze the sound quality of a diesel engine with different cooling fans. Results show that after installing 10-blade fan in medium diameter the sensory pleasantness at each test point is increased, and the increase is 13.53% on average, which indicate the improvement of the engine noise quality. In order to verify the psychoacoustical analysis, the subjective assessment is carried out. The test result shows the noise quality of engine installed 10-blade fan in medium diameter is most superior. 1/3 octave frequency spectrum analysis is used to study the reason of the improvement of engine noise quality. It is found that after installing proper cooling fan the sound pressure level below 400 Hz are obviously increased, the frequency assignment and spectral envelope are more reasonable and a proper cooling fan can optimize the spectrum structure of the engine noise. The psychoacoustic study is applied in the contribution of fan noise to engine noise, and the idea of engine sound quality improvement through the structure optimization is proposed.

  18. Australia’s Submarine Design Capabilities and Capacities: Challenges and Options for the Future Submarine

    Science.gov (United States)

    2011-01-01

    Tool Examples Number of Tools Naval architecture   40 Submarine arrangements Software: AutoCAD, CATIA, Siemens NX , Solidworks, SolidEdge 36 Applied...Software), ROH2 10 Mechanical systems Software: AutoCAD, CATIA, Siemens NX , Solidworks, SolidEdge 24 Propulsion systems   2 Acoustic analysis   3...companies, including MSC Software, NEi Software (NEi NASTRAN), and Siemens PLM Software ( NX NASTRAN). DDAM, in conjunction with NASTRAN and Finite

  19. Introduction of a Cooling-Fan Efficiency Index

    DEFF Research Database (Denmark)

    Schiavon, S.; Melikov, Arsen Krikor

    2009-01-01

    In a warm environment, air movement with elevated velocity is a well-known cooling strategy. The local air movement is typically generated by cooling fans (e.g., ceiling fan, table fans, etc.). Appearance, power input, and price are the main parameters considered today when purchasing cooling fans......, while cooling capacity and efficiency of energy use are unknown. To address this knowledge gap, this paper introduces the cooling-fan efficiency (CFE) index, defined as the ratio between the cooling effect (measured with a thermal manikin) generated by the device and its power consumption. The index...

  20. Fan-beam intensity modulated proton therapy

    Science.gov (United States)

    Hill, Patrick; Westerly, David; Mackie, Thomas

    2013-01-01

    Purpose: This paper presents a concept for a proton therapy system capable of delivering intensity modulated proton therapy using a fan beam of protons. This system would allow present and future gantry-based facilities to deliver state-of-the-art proton therapy with the greater normal tissue sparing made possible by intensity modulation techniques. Methods: A method for producing a divergent fan beam of protons using a pair of electromagnetic quadrupoles is described and particle transport through the quadrupole doublet is simulated using a commercially available software package. To manipulate the fan beam of protons, a modulation device is developed. This modulator inserts or retracts acrylic leaves of varying thickness from subsections of the fan beam. Each subsection, or beam channel, creates what effectively becomes a beam spot within the fan area. Each channel is able to provide 0–255 mm of range shift for its associated beam spot, or stop the beam and act as an intensity modulator. Results of particle transport simulations through the quadrupole system are incorporated into the MCNPX Monte Carlo transport code along with a model of the range and intensity modulation device. Several design parameters were investigated and optimized, culminating in the ability to create topotherapy treatment plans using distal-edge tracking on both phantom and patient datasets. Results: Beam transport calculations show that a pair of electromagnetic quadrupoles can be used to create a divergent fan beam of 200 MeV protons over a distance of 2.1 m. The quadrupole lengths were 30 and 48 cm, respectively, with transverse field gradients less than 20 T/m, which is within the range of water-cooled magnets for the quadrupole radii used. MCNPX simulations of topotherapy treatment plans suggest that, when using the distal edge tracking delivery method, many delivery angles are more important than insisting on narrow beam channel widths in order to obtain conformal target coverage

  1. Characterization of Composite Fan Case Resins

    Science.gov (United States)

    Dvoracek, Charlene M.

    2004-01-01

    The majority of commercial turbine engines that power today s aircraft use a large fan driven by the engine core to generate thrust which dramatically increases the engine s efficiency. However, if one of these fan blades fails during flight, it becomes high energy shrapnel, potentially impacting the engine or puncturing the aircraft itself and thus risking the lives of passengers. To solve this problem, the fan case must be capable of containing a fan blade should it break off during flight. Currently, all commercial fan cases are made of either just a thick metal barrier or a thinner metal wall surrounded by Kevlar-an ultra strong fiber that elastically catches the blade. My summer 2004 project was to characterize the resins for a composite fan case that will be lighter and more efficient than the current metal. The composite fan case is created by braiding carbon fibers and injecting a polymer resin into the braid. The resin holds the fibers together, so at first using the strongest polymer appears to logically lead to the strongest fan case. Unfortunately, the stronger polymers are too viscous when melted. This makes the manufacturing process more difficult because the polymer does not flow as freely through the braid, and the final product is less dense. With all of this in mind, it is important to remember that the strength of the polymer is still imperative; the case must still contain blades with high impact energy. The research identified which polymer had the right balance of properties, including ease of fabrication, toughness, and ability to transfer the load to the carbon fibers. Resin deformation was studied to better understand the composite response during high speed impact. My role in this research was the testing of polymers using dynamic mechanical analysis and tensile, compression, and torsion testing. Dynamic mechanical analysis examines the response of materials under cyclic loading. Two techniques were used for dynamic mechanical analysis

  2. Recent progress in submarine geosciences in China

    Institute of Scientific and Technical Information of China (English)

    JIN Xianglong

    2013-01-01

    In China submarine geosciences represents a newly established discipline of oceanography, focusing on the oceanic lithosphere, and its interface with the hydrosphere and biosphere. Recently, supported by the National High Technology Research and Development Program and other high-tech development projects, significant progress has been made in the development of advanced technologies and equipment. This en-ables the scientists in China to carry out explorations of the international seabed area in the Pacific Ocean and on the Southwest Indian Ridge. In addition, they have been active in the research activities associated the mid-ocean ridges and western Pacific marginal seas. It is anticipated that this research field will continue to be highly fruitful in the near future.

  3. Improvement in performance of main ventilation fan for mines

    Energy Technology Data Exchange (ETDEWEB)

    Mukherjee, S.N. [Indian School of Mines, Dhanbad (India)

    2007-07-01

    This paper examined methods of improving the performance of main ventilation fans in mines. The basic principles of selecting and operating fans were reviewed, and methods of improving the energy efficiency of fans were evaluated. The study considered issues related to static efficiency, as well as curves and intersection points. Mine resistances were examined in relation to ventilation requirements at different phases of mine development. Flow losses and difficulties in producing accurate mathematical models of ventilation fans were also discussed. Fan operation set-points were reviewed. Details of tests conducted to determine the effects of the number of blades on fan performance were presented. The tests demonstrated the importance of incorporating cowl diffusers and guide vanes within the design of axial flow fans. The advantages of deblading were also discussed. 6 refs.

  4. Fluent-based numerical simulation of flow centrifugal fan

    Institute of Scientific and Technical Information of China (English)

    LI Xian-zhang

    2011-01-01

    Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To address this problem, the computational fluid dynamics software FLUENT was applied to establish three-dimensional model of the centrifugal fan. The numeral model was verified by comparing simulation data to experimental data. The pressure centrifugal fan and the speed changes in distribution in centrifugal fan was simulated by computational fluid dynamics software FLUENT. The simulation results show that the gas flow velocity in the impeller increases with impeller radius increase. Static pressure gradually increases when gas from the fan access is imported through fan impeller leaving fans.

  5. Numerical Aerodynamic Evaluation and Noise Investigation of a Bladeless Fan

    Directory of Open Access Journals (Sweden)

    mohammad jafari

    2015-01-01

    Full Text Available Bladeless fan is a novel fan type that has no observable impeller, usually used for domestic applications. Numerical investigation of a Bladeless fan via Finite Volume Method was carried out in this study. The fan was placed in center of a 4×2×2m room and 473 Eppler airfoil profile was used as cross section of the fan. Performance and noise level of the fan by solving continuity and momentum equations as well as noise equations of Broadband Noise Source (BNS and Ffowcs Williams and Hawkings (FW-H in both steady state and unsteady conditions were studied. Flow increase ratio of the fan was captured. Furthermore, BNS method could find outlet slit of the air as the main source of the noise generation. In order to validation of aeroacousticcode results, a simulation of noise for NACA 0012 airfoil via FW-H method was compared to experimental results and good agreement was obtained.

  6. Effect of Submarine Groundwater Discharge on Relict Arctic Submarine Permafrost and Gas Hydrate

    Science.gov (United States)

    Frederick, J. M.; Buffett, B. A.

    2014-12-01

    Permafrost-associated gas hydrate deposits exist at shallow depths within the sediments of the circum-Arctic continental shelves. Degradation of this shallow water reservoir has the potential to release large quantities of methane gas directly to the atmosphere. Gas hydrate stability and the permeability of the shelf sediments to gas migration is closely linked with submarine permafrost. Submarine permafrost extent depends on several factors, such as the lithology, sea level variations, mean annual air temperature, ocean bottom water temperature, geothermal heat flux, and the salinity of the pore water. The salinity of the pore water is especially relevant because it partially controls the freezing point for both ice and gas hydrate. Measurements of deep pore water salinity are few and far between, but show that deep off-shore sediments are fresh. Deep freshening has been attributed to large-scale topographically-driven submarine groundwater discharge, which introduces fresh terrestrial groundwater into deep marine sediments. We investigate the role of submarine ground water discharge on the salinity field and its effects on the seaward extent of relict submarine permafrost and gas hydrate stability on the Arctic shelf with a 2D shelf-scale model based on the finite volume method. The model tracks the evolution of the temperature, salinity, and pressure fields given imposed boundary conditions, with latent heat of water ice and hydrate formation included. The permeability structure of the sediments is coupled to changes in permafrost. Results show that pore fluid is strongly influenced by the permeability variations imposed by the overlying permafrost layer. Groundwater discharge tends to travel horizontally off-shore beneath the permafrost layer and the freshwater-saltwater interface location displays long timescale transient behavior that is dependent on the groundwater discharge strength. The seaward permafrost extent is in turn strongly influenced by the

  7. Submarine volcanoes along the Aegean volcanic arc

    Science.gov (United States)

    Nomikou, Paraskevi; Papanikolaou, Dimitrios; Alexandri, Matina; Sakellariou, Dimitris; Rousakis, Grigoris

    2013-06-01

    The Aegean volcanic arc has been investigated along its offshore areas and several submarine volcanic outcrops have been discovered in the last 25 years of research. The basic data including swath bathymetric maps, air-gun profiles, underwater photos and samples analysis have been presented along the four main volcanic groups of the arc. The description concerns: (i) Paphsanias submarine volcano in the Methana group, (ii) three volcanic domes to the east of Antimilos Volcano and hydrothermal activity in southeast Milos in the Milos group, (iii) three volcanic domes east of Christiana and a chain of about twenty volcanic domes and craters in the Kolumbo zone northeast of Santorini in the Santorini group and (iv) several volcanic domes and a volcanic caldera together with very deep slopes of several volcanic islands in the Nisyros group. The tectonic structure of the volcanic centers is described and related to the geometry of the arc and the neotectonic graben structures that usually host them. The NE-SW direction is dominant in the Santorini and Nisyros volcanic groups, located at the eastern part of the arc, where strike-slip is also present, whereas NW-SE direction dominates in Milos and Methana at the western part, where co-existence of E-W disrupting normal faults is observed. The volcanic relief reaches 1100-1200 m in most cases. This is produced from the outcrops of the volcanic centers emerging usually at 400-600 m depth and ending either below sea level or at high altitudes of 600-700 m on the islands. Hydrothermal activity at relatively high temperatures observed in Kolumbo is remarkable whereas low temperature phenomena have been detected in the Santorini caldera around Kameni islands and in the area southeast of Milos. In Methana and Nisyros, hydrothermal activity seems to be limited in the coastal areas without other offshore manifestations.

  8. Alternative OTEC Scheme for a Submarine Robot

    Science.gov (United States)

    Jones, Jack; Chao, Yi

    2009-01-01

    A proposed system for exploiting the ocean thermal gradient to generate power would be based on the thawing-expansion/ freezing-contraction behavior of a wax or perhaps another suitable phase-change material. The power generated by this system would be used to recharge the batteries in a battery-powered unmanned underwater vehicle [UUV (essentially, a small exploratory submarine robot)] of a type that has been deployed in large numbers in research pertaining to global warming. A UUV of this type travels between the ocean surface and various depths, measuring temperature and salinity. This proposed system would be an alternative to another proposed ocean thermal energy conversion (OTEC) system that would serve the same purpose but would utilize a thermodynamic cycle in which CO2 would be the working fluid. That system is described in Utilizing Ocean Thermal Energy in a Submarine Robot (NPO-43304), immediately following this brief. The main advantage of this proposed system over the one using CO2 is that it could derive a useful amount of energy from a significantly smaller temperature difference. At one phase of its operational cycle, the system now proposed would utilize the surface ocean temperature (which lies between 15 and 20 C over most of the Earth) to melt a wax (e.g., pentadecane) that has a melting/freezing temperature of about 10 C. At the opposite phase of its operational cycle, the system would utilize the lower ocean temperature at depth (e.g., between 4 and 7 C at a depth of 300 m) to freeze the wax. The melting or freezing causes the wax to expand or contract, respectively, by about 8 volume percent.

  9. Improved OTEC System for a Submarine Robot

    Science.gov (United States)

    Chao, Yi; Jones, Jack; Valdez, Thomas

    2010-01-01

    An ocean thermal energy conversion (OTEC), now undergoing development, is a less-massive, more-efficient means of exploiting the same basic principle as that of the proposed system described in "Alternative OTEC Scheme for a Submarine Robot" (NPO-43500), NASA Tech Briefs, Vol. 33, No. 1 (January 2009), page 50. The proposed system as described previously would be based on the thawing-expansion/freezing-contraction behavior of a wax or perhaps another suitable phase-change material (PCM). The power generated by the system would be used to recharge the batteries in a battery- powered unmanned underwater vehicle [UUV (essentially, a small exploratory submarine robot)] of a type that has been deployed in large numbers in research pertaining to global warming. A UUV of this type travels between the ocean surface and depths, measuring temperature and salinity. At one phase of its operational cycle, the previously proposed system would utilize the surface ocean temperature (which lies between 15 and 30 C over most of the Earth) to melt a PCM that has a melting/freezing temperature of about 10 C. At the opposite phase of its operational cycle, the system would utilize the lower ocean temperature at depth (e.g., between 4 and 7 C at a depth of 300 m) to freeze the PCM. The melting or freezing would cause the PCM to expand or contract, respectively, by about 9 volume percent. The PCM would be contained in tubes that would be capable of expanding and contracting with the PCM. The PCM-containing tubes would be immersed in a hydraulic fluid. The expansion and contraction would drive a flow of the hydraulic fluid against a piston that, in turn, would push a rack-and-pinion gear system to spin a generator to charge a battery.

  10. Three-dimensional grid generation about a submarine

    Science.gov (United States)

    Abolhassani, Jamshid Samareh; Smith, Robert E.

    1988-01-01

    A systematic multiple-block grid method has been developed to compute grids about submarines. Several topologies are proposed, and an oscillatory transfinite interpolation is used in the grid construction.

  11. Exploration of submarine wake and powering performance using CFD method

    Energy Technology Data Exchange (ETDEWEB)

    Huizhi, Y.; Hongcui, S.; Nan, Z.; Renyou, Y.; Liangmei, Y. [China Ship Scientific Research Center, Wuxi, Jiangsu (China)]. E-mail: Yaohuizhi@Yahoo.com

    2005-07-01

    In response to the needs of better design and less time, Computational Fluid Dynamic(CFD) methods have become an impartible part in the ship design, especially in the earlier design phases. In this paper FLUENT software was used to predict the wake character and powering performance of submarine at model scale. By an effective combination of the block topology, grid, turbulence model and validation, the simulation scheme was developed and applied to the predictions of multiple designs and optimizations of the earlier submarine design iterations. The incompressible RANS equations with different turbulence models were solved. To handle the block interface between the propeller and submarine stern, sliding girds in multiple blocks were employed, unstructural grids were used in the block around the propeller. Submarine with/without stator and/or propeller were studied. The flow feature, forces and powering performance at various conditions were calculated. The results were compared with experimental data, and a good agreement was obtained. (author)

  12. Submarine Upward Looking Sonar Ice Draft Profile Data and Statistics

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of upward looking sonar draft data collected by submarines in the Arctic Ocean. It includes data from both U.S. Navy and Royal Navy...

  13. Compounding the Losses of Convoyed Ships Attacked by Tactical Submarines

    Directory of Open Access Journals (Sweden)

    Kåre M. Mjelde

    1982-10-01

    Full Text Available It is demonstrated that a time dependent stochastic model for the losses of convoyed ships attacked by submarines can be applied in the determination of the losses in terms of the results of two submodels:

  14. Application of SAR Imagery in Submarine Topography Surveys

    Institute of Scientific and Technical Information of China (English)

    张宁川; 梁开龙; 桂力民

    2004-01-01

    An important research area in oceanographic surveying and mapping is to obtain submarine topography by remote sensing technique, especially by SAR imagery. In this article, problems related to SAR imagery are analyzed to provide references for the further research.

  15. Nocturnal Fanning Suppresses Downy Mildew Epidemics in Sweet Basil.

    Science.gov (United States)

    Cohen, Yigal; Ben-Naim, Yariv

    2016-01-01

    Downy mildew is currently the most serious disease of sweet basil around the world. The oomycete causal agent Peronospora belbahrii requires ≥ 4h free leaf moisture for infection and ≥7.5h of water-saturated atmosphere (relative humidity RH≥95%) at night for sporulation. We show here that continued nocturnal fanning (wind speed of 0.4-1.5 m/s) from 8pm to 8am dramatically suppressed downy mildew development. In three experiments conducted during 2015, percent infected leaves in regular (non-fanned) net-houses reached a mean of 89.9, 94.3 and 96.0% compared to1.2, 1.7 and 0.5% in adjacent fanned net-houses, respectively. Nocturnal fanning reduced the number of hours per night with RH≥95% thus shortened the dew periods below the threshold required for infection or sporulation. In experiments A, B and C, the number of nights with ≥4h of RH≥95% was 28, 10 and 17 in the non-fanned net-houses compared to 5, 0 and 5 in the fanned net-houses, respectively. In the third experiment leaf wetness sensors were installed. Dew formation was strongly suppressed in the fanned net-house as compared to the non-fanned net-house. Healthy potted plants became infected and sporulated a week later if placed one night in the non-fanned house whereas healthy plants placed during that night in the fanned house remained healthy. Infected potted basil plants sporulated heavily after one night of incubation in the non-fanned house whereas almost no sporulation occurred in similar plants incubated that night in the fanned house. The data suggest that nocturnal fanning is highly effective in suppressing downy mildew epidemics in sweet basil. Fanning prevented the within-canopy RH from reaching saturation, reduced dew deposition on the leaves, and hence prevented both infection and sporulation of P. belbahrii.

  16. At Periscope Depth: Exploring Submarine Proliferation In Southeast Asia

    Science.gov (United States)

    2015-09-01

    that Malaysia would sell more than €230 million worth of palm oil to France and accept more than €130 million in French investment.83 In total, the...deterrence, enforcement, prestige, or a combination of the three? This thesis compared the case studies of Indonesia , Malaysia, Singapore, and...rationales for purchasing submarines. Indonesia , Malaysia, and Singapore likely purchased submarines for deterrence and enforcement, and Vietnam for

  17. Littoral Combat Ship Open Ocean Anti-Submarine Warfare

    Science.gov (United States)

    2014-06-01

    COVERED Capstone 4. TITLE AND SUBTITLE LITTORAL COMBAT SHIP OPEN OCEAN ANTI-SUBMARINE WARFARE 5. FUNDING NUMBERS 6. AUTHOR(S) 311-124O/Team LCS...Life cycle cost LCCE Life cycle cost estimate LCS Littoral combat ship LHA Landing ship, helicopter assault LHD Landing ship, helicopter...is unlimited LITTORAL COMBAT SHIP OPEN OCEAN ANTI- SUBMARINE WARFARE by Team LCS 311-124O June 2014 Capstone Advisors: John Green Dan

  18. Topology Model of the Flow around a Submarine Hull Form

    Science.gov (United States)

    2015-12-01

    measured from the body (x) axis hf height of the fin measured from the casing L length of the submarine Lc /4 distance from the submarine nose to the...very fine alternating local positive- and negative- bifurcation lines. These structures scale with the thickness of the boundary layer and they resemble...flow bifurcations. In Fig. 23(a), the smoke filaments (illuminated by a 2mm thick laser-light sheet) capture the instantaneous roll-up. In the simplest

  19. An Analysis on Limit Load for Corroded Submarine Pipelines

    Institute of Scientific and Technical Information of China (English)

    TAN Kai-ren; XIAO Xi

    2006-01-01

    By means of elastic-plastic finite element analysis, a systematic nonlinear analysis of material and geometry has been carried out for submarine pipelines. A criterion for deriving limit load is studied. Based on this criterion, the limit load for corroded submarine pipelines is calculated. The corrosion length, corrosion depth and corrosion width affect the limit load. A solution to limit load is proposed and proved valid through comparison of the solution with burst test results and ASME B31G solutions.

  20. Comparison of turbidite facies associations in modern passive-margin Mississippi fan with ancient active-margin fans

    Science.gov (United States)

    Shanmugam, G.; Moiola, R. J.; McPherson, J. G.; O'Connell, S.

    1988-07-01

    Our comparison of the modern passive-margin Mississippi fan (DSDP Leg 96) with ancient active-margin fans (e.g. Eocene Hecho Group, Spain) reveals major differences in turbidite facies associations (Mutti and Ricci Lucchi scheme) and in seismic characteristics in the lower fan area. The lower (outer) Mississippi fan is composed of channel (Facies B and F) and non-channel facies (C? and D), whereas ancient fans are characterized by non-channelized, thickening-upward, depositional lobe facies (C and D). An absence of depositional lobes in the lower Mississippi fan is also suggested by a lack of convex-upward (mounded) seismic reflections with bidirectional downlap. Continuous seismic reflections of the lower Mississippi fan may represent "sheet sands", but not those of true depositional lobes with mounded character. Extensive channelization in modern passive-margin fans appears to be a product of the lateral shifting of a major sinuous distributary system, developed as a consequence of low gradients and the transport of sediment with a relatively low sand/mud ratio. In contrast, channels in active-margin fans are short and of low sinuosity as a result of high gradients and the transport of sediment with a relatively high sand/mud ratio. The turbidite facies association scheme, which was developed exclusively from ancient active-margin fans, should be applied to mature passive-margin fans with qualifications because of the differences in spatial distribution of turbidite facies and their associations.

  1. Solution of Supplee's submarine paradox through special and general relativity

    CERN Document Server

    Vieira, R S

    2016-01-01

    In 1989 Supplee described an apparent relativistic paradox on which a submarine seems to sink in a given frame while floating in another one. If the submarine density is adjusted to be the same as the water density (when both of them are at rest) and then it is put to move, the density of the submarine will become higher than that of the water, thanks to Lorentz contraction, and hence it sinks. However, in the submarine proper frame, is the water that becomes denser, so the submarine supposedly should float and we get a paradox situation. In this paper we analyze the submarine paradox in both a flat and a curved spacetime. In the case of a flat spacetime, we first show that any relativistic force field in special relativity can be written in the Lorentz form, so that it can always be decomposed into a static (electric-like) and a dynamic (magnetic-like) part. Taking into account the gravitomagnetic effects between the Earth and the water, a relativistic formulation of Archimedes principle can be established, ...

  2. The development of permafrost bacterial communities under submarine conditions

    Science.gov (United States)

    Mitzscherling, Julia; Winkel, Matthias; Winterfeld, Maria; Horn, Fabian; Yang, Sizhong; Grigoriev, Mikhail N.; Wagner, Dirk; Overduin, Pier P.; Liebner, Susanne

    2017-07-01

    Submarine permafrost is more vulnerable to thawing than permafrost on land. Besides increased heat transfer from the ocean water, the penetration of salt lowers the freezing temperature and accelerates permafrost degradation. Microbial communities in thawing permafrost are expected to be stimulated by warming, but how they develop under submarine conditions is completely unknown. We used the unique records of two submarine permafrost cores from the Laptev Sea on the East Siberian Arctic Shelf, inundated about 540 and 2500 years ago, to trace how bacterial communities develop depending on duration of the marine influence and pore water chemistry. Combined with geochemical analysis, we quantified total cell numbers and bacterial gene copies and determined the community structure of bacteria using deep sequencing of the bacterial 16S rRNA gene. We show that submarine permafrost is an extreme habitat for microbial life deep below the seafloor with changing thermal and chemical conditions. Pore water chemistry revealed different pore water units reflecting the degree of marine influence and stages of permafrost thaw. Millennia after inundation by seawater, bacteria stratify into communities in permafrost, marine-affected permafrost, and seabed sediments. In contrast to pore water chemistry, the development of bacterial community structure, diversity, and abundance in submarine permafrost appears site specific, showing that both sedimentation and permafrost thaw histories strongly affect bacteria. Finally, highest microbial abundance was observed in the ice-bonded seawater unaffected but warmed permafrost of the longer inundated core, suggesting that permafrost bacterial communities exposed to submarine conditions start to proliferate millennia after warming.

  3. Cardiometabolic Health in Submariners Returning from a 3-Month Patrol

    Directory of Open Access Journals (Sweden)

    Heath G. Gasier

    2016-02-01

    Full Text Available Confined space, limited exercise equipment, rotating shift work and reduced sleep may affect cardiometabolic health in submariners. To test this hypothesis, 53 male U.S. Submariners (20–39 years were studied before and after a 3-month routine submarine patrol. Measures included anthropometrics, dietary and physical activity, biomarkers of cardiometabolic health, energy and appetite regulation, and inflammation. Before deployment, 62% of submariners had a body fat % (BF% ≥ 25% (obesity, and of this group, 30% met the criteria for metabolic syndrome. In obese volunteers, insulin, the homeostatic model assessment of insulin resistance (HOMA-IR, leptin, the leptin/adiponectin ratio, and pro-inflammatory chemokines growth-related oncogene and macrophage-derived chemokine were significantly higher compared to non-obese submariners. Following the patrol, a significant mean reduction in body mass (5% and fat-mass (11% occurred in the obese group as a result of reduced energy intake (~2000 kJ during the patrol; and, independent of group, modest improvements in serum lipids and a mean reduction in interferon γ-induced protein 10 and monocyte chemotactic protein 1 were observed. Since 43% of the submariners remained obese, and 18% continued to meet the criteria for metabolic syndrome following the patrol, the magnitude of weight loss was insufficient to completely abolish metabolic dysfunction. Submergence up to 3-months, however, does not appear to be the cause of obesity, which is similar to that of the general population.

  4. Fanning the Optimal Breeze with an Abanico

    Science.gov (United States)

    Goon, Grace; Marthelot, Joel; Reis, Pedro; MIT EGS Lab Team

    Flexible hand-held fans, or abanicos, are universally employed as cooling devices that are both portable and sustainable. Their to and fro axial motion about one's hand generates an airflow that increases the evaporation rate near the skin and refreshes. We study this problem in the context of fluid-structure interaction, through precision model experiments. We first characterize the elastic properties of a semi-circular thin plates with various thickness and evaluate their aerodynamic performance in a custom built apparatus. The air velocity profile that results from the flapping motion of the fan is characterized for different driving conditions. A systematic variation of the geometric and elastic parameters, along with an exploration of the parameter space of the periodic driving motion (amplitude and frequency), allows us to establish optimal design and operational conditions for maximal output of the generated airflow, while minimizing the input power.

  5. Polarization-fan high-order harmonics

    Science.gov (United States)

    Fleischer, Avner; Bordo, Eliyahu; Kfir, Ofer; Sidorenko, Pavel; Cohen, Oren

    2017-02-01

    We predict high-order harmonics in which the polarization within the spectral bandwidth of each harmonic varies with frequency continuously and significantly. For example, the interaction of counter-rotating circularly-polarized bichromatic drivers having close central frequencies with isotropic gas leads to the emission of polarization-fan harmonics where each harmonic in the spectrum has the following property: it is nearly circularly-polarized in one tail of the harmonic peak, linear in the center of the peak and nearly circular with the opposite helicity in the opposite tail. Also, we show that polarization-fan high harmonics with modulated ellipticity are obtained when elliptical drivers are used. Polarization-fan harmonics are obtained as a result of multiple (at least two) head-on recollisions of electrons with their parent ions occurring from different angles in a two-dimensional plane. The use of bichromatic drivers with close central frequencies largely preserves the single-cycle, single-atom and macroscopic physics of ‘ordinary’ high harmonic generation, where both the driver and high harmonics are linearly polarized. Thus, it should offer several attracting features, including (i) a direct route for extending the maximal photon energy of observed helical high harmonics to keV by using bichromatic drivers only in the mid-IR region and (ii) utilizing phase matching methods that were developed for ‘ordinary’ high harmonic generation driven by quasi-monochromatic pulses (e.g. pressure tuning phase matching). These polarization-fan harmonics may be utilized for exploring non-repetitive ultrafast chiral phenomena, e.g. dynamics of magnetic domains, in a single shot.

  6. Gigapixel Images Connect Sports Teams with Fans

    Science.gov (United States)

    2013-01-01

    Technology developed at Ames Research Center to take high-resolution imagery on Mars is now being used in baseball stadiums across the country. New York City-based Major League Baseball Advanced Media LP customized the platform to accommodate in-game shots that capture nearly the whole stadium. Fans navigate the photos online and tag themselves and their friends using social media tools.

  7. The 3D visualization technology research of submarine pipeline based Horde3D GameEngine

    Science.gov (United States)

    Yao, Guanghui; Ma, Xiushui; Chen, Genlang; Ye, Lingjian

    2013-10-01

    With the development of 3D display and virtual reality technology, its application gets more and more widespread. This paper applies 3D display technology to the monitoring of submarine pipeline. We reconstruct the submarine pipeline and its surrounding submarine terrain in computer using Horde3D graphics rendering engine on the foundation database "submarine pipeline and relative landforms landscape synthesis database" so as to display the virtual scene of submarine pipeline based virtual reality and show the relevant data collected from the monitoring of submarine pipeline.

  8. Fan edits and the legacy of The Phantom Edit

    Directory of Open Access Journals (Sweden)

    Joshua Wille

    2014-09-01

    Full Text Available A fan edit can generally be defined as an alternative version of a film or television text created by a fan. It offers a different viewing experience, much as a song remix offers a different listening experience. The contemporary wave of fan edits has emerged during the remix zeitgeist of digital media and at a time when digital video editing technology has become more affordable and popular. The increasing number of alternative versions of films and the works of revisionist Hollywood filmmakers such as George Lucas have contributed to a greater public understanding of cinema as a fluid medium instead of one that exists in a fixed form. The Phantom Edit (2000, a seminal fan edit based on Lucas's Star Wars Episode I: The Phantom Menace (1999, inspired new ranks of fan editors. However, critics have misunderstood fan edits as merely the work of disgruntled fans. In order to provide a critical and historical basis for studies in fan editing as a creative practice, I examine previous interpretations of fan edits in the context of relevant contemporary works, and I use an annotated chronology of The Phantom Edit to trace its influence on subsequent fan editing communities and uncover their relationship with intellectual property disputes.

  9. "Emotions-Only" versus "Special People": Genre in fan discourse

    Directory of Open Access Journals (Sweden)

    Louisa Ellen Stein

    2008-09-01

    Full Text Available This essay looks at genre as a complex set of discursive threads running unevenly through production, TV text, and fan reception. Through a case study of the reception of fan favorite Roswell, this essay interrogates the role of genre in spectatorship. In its mixing of teen and science fiction elements, Roswell trod upon contested generic spaces, eliciting strong reaction from its viewers. Connections between genre and gender came to the fore, as producer commentary linked science fiction with male audiences and teen romance with female audiences. Fans responded with analyses that greatly complicated and at times overtly rejected industrial suppositions regarding the gendered work of genre. Through these fan conversations, we can witness the complexity of genre as discursive thread moving through not only TV texts but also multivariant fan responses. I intend this essay to work at two levels. My analysis of fan responses to Roswell models the possibilities of a close study of genre discourse. At the same time, my case study probes the nature of genre in fan engagement, as genre discourses intersect with other fan concerns such as character identification, perceptions of textual quality, and questions of gender representation. While we cannot necessarily look to fan accounts for proof of how viewers engage with genre, they do tell us how fans frame their engagement with genre, how they incorporate genre into their performance of fannishness, and how they perform and thus enact genre itself as a shared cultural process.

  10. The aerodynamics of a wind-tunnel fan

    Science.gov (United States)

    Corson, Blake W

    1941-01-01

    The vortex blade-element theory modified to apply to an axial fan working in a duct is reviewed. Thrust and power coefficients for a fan are identified with the corresponding coefficients for airplane propellers. The relation of pressure produced by the fan to the blade-element coefficients is developed. The distribution of axial velocity of fluid through a fan is assumed to be controlled by the fan itself. The radial distribution of tangential velocity imported by the fan to fluid moving through the fan is shown to be independent of the axial-velocity distribution. A nondimensional coefficient, designated the rotation constant, is introduced. This constant is based solely upon design information. The use of the rotation constant in simplifying the design of a fan for a specific operating condition is demonstrated. Based on the use of the rotation constant, a graphical method is outlined by which the performance of a given fan in a given wind tunnel may be predicted and by which the distributions of axial velocity of the fluid through the fan under various operating conditions may be established.

  11. Submarine Landslides at Santa Catalina Island, California

    Science.gov (United States)

    Legg, M. R.; Francis, R. D.

    2011-12-01

    Santa Catalina Island is an active tectonic block of volcanic and metamorphic rocks originally exposed during middle Miocene transtension along the evolving Pacific-North America transform plate boundary. Post-Miocene transpression created the existing large pop-up structure along the major strike-slip restraining bend of the Catalina fault that forms the southwest flank of the uplift. Prominent submerged marine terraces apparent in high-resolution bathymetric maps interrupt the steep submarine slopes in the upper ~400 meters subsea depths. Steep subaerial slopes of the island are covered by Quaternary landslides, especially at the sea cliffs and in the blueschist metamorphic rocks. The submarine slopes also show numerous landslides that range in area from a few hectares to more than three sq-km (300 hectares). Three or more landslides of recent origin exist between the nearshore and first submerged terrace along the north-facing shelf of the island's West End. One of these slides occurred during September 2005 when divers observed a remarkable change in the seafloor configuration after previous dives in the area. Near a sunken yacht at about 45-ft depth where the bottom had sloped gently into deeper water, a "sinkhole" had formed that dropped steeply to 100-ft or greater depths. Some bubbling sand was observed in the shallow water areas that may be related to the landslide process. High-resolution multibeam bathymetry acquired in 2008 by CSU Monterey Bay show this "fresh" slide and at least two other slides of varying age along the West End. The slides are each roughly 2 hectares in area and their debris aprons are spread across the first terrace at about 85-m water depth that is likely associated with the Last Glacial Maximum sealevel lowstand. Larger submarine slides exist along the steep Catalina and Catalina Ridge escarpments along the southwest flank of the island platform. A prominent slide block, exceeding 3 sq-km in area, appears to have slipped more than

  12. Submarine Volcanic Morphology of Santorini Caldera, Greece

    Science.gov (United States)

    Nomikou, P.; Croff Bell, K.; Carey, S.; Bejelou, K.; Parks, M.; Antoniou, V.

    2012-04-01

    Santorini volcanic group form the central part of the modern Aegean volcanic arc, developed within the Hellenic arc and trench system, because of the ongoing subduction of the African plate beneath the European margin throughout Cenozoic. It comprises three distinct volcanic structures occurring along a NE-SW direction: Christianna form the southwestern part of the group, Santorini occupies the middle part and Koloumbo volcanic rift zone extends towards the northeastern part. The geology of the Santorini volcano has been described by a large number of researchers with petrological as well as geochronological data. The offshore area of the Santorini volcanic field has only recently been investigated with emphasis mainly inside the Santorini caldera and the submarine volcano of Kolumbo. In September 2011, cruise NA-014 on the E/V Nautilus carried out new surveys on the submarine volcanism of the study area, investigating the seafloor morphology with high-definition video imaging. Submarine hydrothermal vents were found on the seafloor of the northern basin of the Santorini caldera with no evidence of high temperature fluid discharges or massive sulphide formations, but only low temperature seeps characterized by meter-high mounds of bacteria-rich sediment. This vent field is located in line with the normal fault system of the Kolumbo rift, and also near the margin of a shallow intrusion that occurs within the sediments of the North Basin. Push cores have been collected and they will provide insights for their geochemical characteristics and their relationship to the active vents of the Kolumbo underwater volcano. Similar vent mounds occur in the South Basin, at shallow depths around the islets of Nea and Palaia Kameni. ROV exploration at the northern slopes of Nea Kameni revealed a fascinating underwater landscape of lava flows, lava spines and fractured lava blocks that have been formed as a result of 1707-1711 and 1925-1928 AD eruptions. A hummocky topography at

  13. A Fan-tastic Alternative to Bulbs: Learning Circuits with Fans

    Science.gov (United States)

    Ekey, Robert; Edwards, Andrea; McCullough, Roy; Reitz, William; Mitchell, Brandon

    2017-01-01

    The incandescent bulb has been a useful tool for teaching basic electrical circuits, as brightness is related to the current or power flowing through a bulb. This has led to the development of qualitative pedagogical treatments for examining resistive combinations in simple circuits using bulbs and batteries, which were first introduced by James Evans and thoroughly expanded upon by McDermott and others. This paper argues that replacing bulbs with small computer fans leads to similar, if not greater, insight of experimental results that can be qualitatively observed using a variety of senses. The magnitude of current through a fan is related to the frequency of the rotating fan blades, which can be seen, heard, and felt by the students. Experiments using incandescent bulbs only utilize vision, which is not ideal as the human eyes' perception of brightness is skewed because the response to light intensity is logarithmic rather than linear.

  14. Quantifying submarine landslide processes driven by active tectonic forcing: Cook Strait submarine canyon, New Zealand.

    Science.gov (United States)

    Mountjoy, J. J.; Barnes, P. M.; Pettinga, J. R.

    2006-12-01

    The Cook Strait submarine canyon system is a multi-branched, deeply incised and highly sinuous feature of New Zealand's active margin, covering some 1500km2 of sea floor between the North and South Islands and spanning water depths of between 50 and 2700m. The canyon occurs at the transition from the westward dipping oblique subduction zone adjacent to the SE North Island and the zone of continental transpression in NE South Island. The recent acquisition of high resolution (5-10m) SIMRAD EM300 bathymetric data allows active tectonic and geomorphic processes to be assessed and quantified at a level of detail previously not possible. While multiple active submarine fault traces have been identified in the Cook Strait by previous studies, quantitative information on their activity has been limited. Cook Strait is structurally characterized by westward dipping thrust faults and E-W trending dextral strike slip faults. The multiple large magnitude high frequency earthquake sources define zones of very high ground shaking expected to contribute to triggering of extensive submarine slope failures. Landslide activity within the canyon system is widespread and represents the dominant mass movement process affecting canyon heads and walls, redistributing material into valley fills. Complexes of large (km3) multi-stepped, deep-seated (100m) translational bedding plane failures represented by gently sloping (<3°) evacuated slide-scar areas with associated blocky valley fill deposits are numerous. Steep catchment heads, channel walls and the leading edges of asymmetric thrust-fault driven anticlines are dominated by gulley and rill systems with associated eroded and/or incipient slump features. Large (107m3+) slide blocks are recognized in discrete failures with quantifiable displacement vectors. Tsunamigenic landslides in this environment are inevitable. This study will provide quantification of landslide models including triggering mechanisms, discrete geometries and

  15. The Himalaya-Bengal Fan source to sink system - new insights by correlation of re-processed seismic data and IODP Expedition 354 results

    Science.gov (United States)

    Bergmann, Fenna; Schwenk, Tilmann; Spiess, Volkard; France-Lanord, Christian

    2016-04-01

    The Bengal Fan, hosted in the northern Indian Ocean, is the largest submarine fan on Earth. Fan evolution started in the Early Eocene as a direct response to the collision of India with the Asian continent in Middle Paleocene times. Subsequently the Himalayan plateau uplift was initiated. Thereby generated interactions with the regional climate caused the evolution of the Indian monsoonal system. Drained by the rivers Ganges and Brahmaputra, ~ 80% of eroded Himalayan sediments are deposited in the Bengal Fan. Hence, the Fan provides the most complete record of the Himalayan history and is well suited to investigate the direct link between the tectonic uplift and the climate evolution of the region. Sediments are transported onto the deep sea fan by turbidity currents building up chan-nel-levee systems. These channel-levee systems are the main architectural elements of the Bengal Fan and are suspected to have their onset in Late Miocene times. Frequent channel avulsion on the upper fan led to the abandonment of old channels and formation of new channel-levee systems or even channel-reoccupation. This complex erosional/depositional system involves lateral depocenter migration, probably on millennial timescales. Conse-quently, investigations of the Himalaya as sediment source begins with a comprehensive understanding of transport, deposition and modification within the Bengal Fan sediment sink. In February/March 2015 the IODP Expedition 354 drilled at 7 sites along a ~320 km long E-W transect at 8° N. Aiming at the recovery of pre-fan deposits and deposits of the Pliocene and Upper Miocene Fan evolution, three deep sites (900 - 1200 mbsf) were realized. These where complemented by four shallow sites (200-300 mbsf) for a detailed study of the depos-its of the last 1-2 million years, including the latest known channel activities (Holocene times). Several channel-levee systems and inter-channel deposits were drilled, active at different times of Fan evolution. To

  16. Are the dimensions of submarine lobe systems independent of allogenic factors?

    Science.gov (United States)

    Prélat, A.; Covault, J. A.; Hodgson, D. M.; Fildani, A.; Flint, S. S.

    2010-05-01

    Submarine lobe dimensions from six different systems are compared: 1) the exhumed Permian Fan 3 lobe complex of the Tanqua Karoo, South Africa; 2) the modern Amazon fan channel-mouth lobe complex, offshore Brazil; 3) a portion of the modern distal Zaïre fan, offshore Angola / Congo; 4) a Pleistocene fan of the Kutai Basin, subsurface offshore Indonesia; 5) the modern Golo system, offshore east Corsica, France; and 6) a lobe complex deposited in the shallow subsurface, offshore Nigeria. These six systems have significantly different source-to-sink configurations (shelf dimension and slope topography), sediment supply characteristics (calibre and rate), tectonic settings, (palaeo) latitude, and delivery systems. Despite these differences, the lobe deposits share similar geometric and dimensional characteristics. Lobes are grouped into two distinct populations of geometries that can be related to basin-floor topography. The first population corresponds to areally extensive but thin lobes (average width 14 km × length 35 km × thickness 12 m) that were deposited onto low relief basin floor areas, like the Tanqua Karoo, the Amazon and the Zaïre systems. The second population corresponds to areally smaller but thicker lobes (average width 5 km × length 8 km × thickness 30 m) that were deposited into settings with higher amplitude of relief, like in the Corsican trough, the Kutai basin, and offshore Nigeria. Basin floor topography confining the lobes can be very subtle, and only occur on one side of the system. The two populations of lobe types, however, share similar volumes, in the order of 1 or 2 km3. The largest lobes are observed in the Zaïre fan, where the average lobe volume reaches 3.3 km3 and the smallest lobes are observed in the Corsican trough where the average lobe volume is 0.4 km3. This variation in lobe volume is minor when compared to the variation observed in present-day up-dip drainage systems, which provide sediment to the deep-water depositional

  17. Beam fanning effect and image storage in Ce: KNSBN crystal

    Institute of Scientific and Technical Information of China (English)

    LI PanLai; GUO QingLin; WANG ZhiJun; PANG LiBin; LIANG BaoLai

    2007-01-01

    A non-synchronously-numerating experimental system is applied in this research. The effect of the incident beam intensity Ⅰ and the beam incident angle θ on beam fanning effect is investigated with a singular beam incident on Ce:KNSBN crystal. The results show that the beam fanning effect strongly depends on Iand θ. The threshold effect of/for the beam fanning in Ce:KNSBN crystal is observed, and the threshold intensity of incident beam keeps the same value of 38.2 mW/cm2 for different θ, and the steady beam fanning intensity Ifsat reaches a peak at θ=15° under the same Ⅰ. In addition, the effect of the incident beam modulated on the beam fanning noise and holographic storage in Ce:KNSBN crystal is studied. And the results suggest that the beam fanning noise is effectively suppressed, and the quality of the reappearance image is greatly improved.

  18. Procedure for Balancing an Air Distribution System with Decentralised Fans

    DEFF Research Database (Denmark)

    Gunner, Amalie; Hultmark, Göran; Vorre, Anders

    2015-01-01

    of the fans. In conventional air distribution systems the fan provides the necessary pressure to overcome the resistance in the branch with the highest pressure resistance. This gives an unnecessary overpressure in the remaining branches that does not provide any useful purpose. In order to decrease the fan......This paper presents results from an on-going project concerning new design procedures for mechanical ventilation systems with low energy use. Conventional constant air volume (CAV) systems are usually balanced using flat plate dampers. The purpose of using balancing dampers is to intentionally...... pressure requirements the fan was dimensioned for the branch with the least pressure resistance. The decentralised fans then provided sufficient pressure to overcome the exact resistance in the corresponding branch. The results show that by using decentralised fans in duct systems instead of dampers...

  19. Procedure for Balancing an Air Distribution System with Decentralised Fans

    DEFF Research Database (Denmark)

    Gunner, Amalie; Hultmark, Göran; Vorre, Anders;

    2015-01-01

    This paper presents results from an on-going project concerning new design procedures for mechanical ventilation systems with low energy use. Conventional constant air volume (CAV) systems are usually balanced using flat plate dampers. The purpose of using balancing dampers is to intentionally...... flawed. This paper presents a new procedure for balancing of CAV systems in combination with decentralised fans. The new system was based on replacing the balancing dampers with decentralised fans. By replacing the balancing dampers with decentralised fans, airflows can be balanced by adjusting the speed...... of the fans. In conventional air distribution systems the fan provides the necessary pressure to overcome the resistance in the branch with the highest pressure resistance. This gives an unnecessary overpressure in the remaining branches that does not provide any useful purpose. In order to decrease the fan...

  20. High pressure axial flow fans for modern coal power stations

    Energy Technology Data Exchange (ETDEWEB)

    Cyrus, Vaclav [AHT Energetika s.r.o., Praha (Czech Republic); Koci, Petr [ZVVZ Milevsko a.s. (Czech Republic)

    2008-07-01

    Brown coal fired power stations, located in Northern Bohemia, have mostly older boiler blocks with an output of 110 and 200 MWe. Flue gases are cleaned by the desulphurization plants installed between 1993 and 1997. Usually, each boiler block has two air fans and one to three flue gas fans. Flue gas fans operate in severe conditions; fan blades should be resistant to the flue gases containing sulphur and acid drops with the operating temperature at 170 C to 190 C. Additionally, flue gas also often contains ash particles. Currently, some boiler blocks are gradually being refurbished. New blocks with an electrical power output of 600 to 700 MWe are at the design stage. Submitted paper shows our design study of one stage axial flow fan for the new blocks. Results from the new aerodynamic research of the axial flow stages were used in the fan design. (orig.)

  1. Design and analysis of submarine radome

    Science.gov (United States)

    Sandeep, C. Satya; Prasad, U. Shiva; Suresh, R.; Rathan, A.; Sravanthi, G.; Govardhan, D.

    2017-07-01

    Radomes are the electromagnetic windows that protect microwave sub-systems from the environmental effects. The major requirement of radome is its transparency to microwaves and for most of the cases mechanical properties are also equally important. Radome for underwater applications has to withstand high water pressure of the order of 45 bars. Composite materials owing to their high strength to weight ratio, high stiffness and better corrosion resistance are potential source for under water applications. The concept of 'tailoring' the material properties to suit the radome is obtained by selecting proper reinforcement, resin matrix and their compositions. The mechanical properties of composite material, evaluated by testing specimens as per ASTM standards, are utilized in designing the radome. The modulus properties calculated using classical theories of composite materials and compared with test results. ANSYS a Finite Element software package used to analyse the problem. As the cross sectional thickness of radome varies, the complexity in fabrication is overcome by adopting matched die techniques. The radome design and finite element analysis validation concluded by conducting the pressure test on radome. On the design a modal analysis is also carried to check for the natural frequency, So that resonance does not occur if the natural frequency of the radome coincides with the excitation frequency of the submarine Clinical information system (CIS) for UNRWA is a computerized distributed application that used in clinics which follows the United Nations Relief and Works Agency (UNRWA) to manage the clinical requirements and services.

  2. From submarine to lacustrine groundwater discharge

    Science.gov (United States)

    Lewandowski, Jörg; Meinikmann, Karin; Pöschke, Franziska; Nützmann, Gunnar; Rosenberry, Donald O.

    2017-01-01

    Submarine groundwater discharge (SGD) and its role in marine nutrient cycling are well known since the last decade. The freshwater equivalent, lacustrine groundwater discharge (LGD), is often still disregarded, although first reports of LGD are more than 50 years old. We identify nine different reasons why groundwater has long been disregarded in both freshwater and marine environments such as invisibility of groundwater discharge, the size of the interface and its difficult accessibility. Although there are some fundamental differences in the hydrology of SGD and LGD, caused primarily by seawater recirculation that occurs only in cases of SGD, there are also a lot of similarities such as a focusing of discharge to near-shore areas. Nutrient concentrations in groundwater near the groundwater–surface water interface might be anthropogenically enriched. Due to spatial heterogeneity of aquifer characteristics and biogeochemical processes, the quantification of groundwater-borne nutrient loads is challenging. Both nitrogen and phosphorus might be mobile in near-shore aquifers and in a lot of case studies large groundwater-borne nutrient loads have been reported.

  3. Seismic reflections associated with submarine gas hydrates

    Energy Technology Data Exchange (ETDEWEB)

    Andreassen, K.

    1995-12-31

    Gas hydrates are often suggested as a future energy resource. This doctoral thesis improves the understanding of the concentration and distribution of natural submarine gas hydrates. The presence of these hydrates are commonly inferred from strong bottom simulating reflection (BSR). To investigate the nature of BSR, this work uses seismic studies of hydrate-related BSRs at two different locations, one where gas hydrates are accepted to exist and interpreted to be very extensive (in the Beaufort Sea), the other with good velocity data and downhole logs available (offshore Oregon). To ascertain the presence of free gas under the BSR, prestack offset data must supplement near-vertical incidence seismic data. A tentative model for physical properties of sediments partially saturated with gas hydrate and free gas is presented. This model, together with drilling information and seismic data containing the BSR beneath the Oregon margin and the Beaufort Sea, made it possible to better understand when to apply the amplitude-versus-offset (AVO) method to constrain BSR gas hydrate and gas models. Distribution of natural gas hydrates offshore Norway and Svalbard is discussed and interpreted as reflections from the base of gas hydrate-bearing sediments, overlying sediments containing free gas. Gas hydrates inferred to exist at the Norwegian-Svalbard continental margin correlate well with Cenozoic depocenters, and the associated gas is assumed to be mainly biogenic. Parts of that margin have a high potential for natural gas hydrates of both biogenic and thermogenic origin. 235 refs., 86 figs., 4 tabs.

  4. Submarine landslides of the Southern California Borderland

    Science.gov (United States)

    Lee, H.J.; Greene, H. Gary; Edwards, B.D.; Fisher, M.A.; Normark, W.R.

    2009-01-01

    Conventional bathymetry, sidescan-sonar and seismic-reflection data, and recent, multibeam surveys of large parts of the Southern California Borderland disclose the presence of numerous submarine landslides. Most of these features are fairly small, with lateral dimensions less than ??2 km. In areas where multibeam surveys are available, only two large landslide complexes were identified on the mainland slope- Goleta slide in Santa Barbara Channel and Palos Verdes debris avalanche on the San Pedro Escarpment south of Palos Verdes Peninsula. Both of these complexes indicate repeated recurrences of catastrophic slope failure. Recurrence intervals are not well constrained but appear to be in the range of 7500 years for the Goleta slide. The most recent major activity of the Palos Verdes debris avalanche occurred roughly 7500 years ago. A small failure deposit in Santa Barbara Channel, the Gaviota mudflow, was perhaps caused by an 1812 earthquake. Most landslides in this region are probably triggered by earthquakes, although the larger failures were likely conditioned by other factors, such as oversteepening, development of shelf-edge deltas, and high fluid pressures. If a subsequent future landslide were to occur in the area of these large landslide complexes, a tsunami would probably result. Runup distances of 10 m over a 30-km-long stretch of the Santa Barbara coastline are predicted for a recurrence of the Goleta slide, and a runup of 3 m over a comparable stretch of the Los Angeles coastline is modeled for the Palos Verdes debris avalanche. ?? 2009 The Geological Society of America.

  5. NOAA Charted Submarine cables in the United States as of December 2012

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data depict the occurrence of submarine cables in and around U.S. navigable waters. The geographic extent of these data is greater than the "NASCA Submarine...

  6. On limited fan-in optimal neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Beiu, V.; Makaruk, H.E. [Los Alamos National Lab., NM (United States); Draghici, S. [Wayne State Univ., Detroit, MI (United States). Vision and Neural Networks Lab.

    1998-03-01

    Because VLSI implementations do not cope well with highly interconnected nets the area of a chip growing as the cube of the fan-in--this paper analyses the influence of limited fan in on the size and VLSI optimality of such nets. Two different approaches will show that VLSI- and size-optimal discrete neural networks can be obtained for small (i.e. lower than linear) fan-in values. They have applications to hardware implementations of neural networks. The first approach is based on implementing a certain sub class of Boolean functions, IF{sub n,m} functions. The authors will show that this class of functions can be implemented in VLSI optimal (i.e., minimizing AT{sup 2}) neural networks of small constant fan ins. The second approach is based on implementing Boolean functions for which the classical Shannon`s decomposition can be used. Such a solution has already been used to prove bounds on neural networks with fan-ins limited to 2. They generalize the result presented there to arbitrary fan-in, and prove that the size is minimized by small fan in values, while relative minimum size solutions can be obtained for fan-ins strictly lower than linear. Finally, a size-optimal neural network having small constant fan-ins will be suggested for IF{sub n,m} functions.

  7. The Mechanical Impact of Aerodynamic Stall on Tunnel Ventilation Fans

    Directory of Open Access Journals (Sweden)

    A. G. Sheard

    2012-01-01

    Full Text Available This paper describes work aimed at establishing the ability of a tunnel ventilation fan to operate without risk of mechanical failure in the event of aerodynamic stall. The research establishes the aerodynamic characteristics of a typical tunnel ventilation fan when operated in both stable and stalled aerodynamic conditions, with and without an anti-stall stabilisation ring, with and without a “nonstalling” blade angle and at full, half, and one quarter design speed. It also measures the fan’s peak stress, thus facilitating an analysis of the implications of the experimental results for mechanical design methodology. The paper concludes by presenting three different strategies for tunnel ventilation fan selection in applications where the selected fan will most likely stall. The first strategy selects a fan with a low-blade angle that is nonstalling. The second strategy selects a fan with a high-pressure developing capability. The third strategy selects a fan with a fitted stabilisation ring. Tunnel ventilation system designers each have their favoured fan selection strategy. However, all three strategies can produce system designs within which a tunnel ventilation fan performs reliably in-service. The paper considers the advantages and disadvantages of each selection strategy and considered the strengths and weaknesses of each.

  8. K-pop Reception and Participatory Fan Culture in Austria

    Directory of Open Access Journals (Sweden)

    Sang-Yeon Sung

    2013-12-01

    Full Text Available K-pop’s popularity and its participatory fan culture have expanded beyond Asia and become significant in Europe in the past few years. After South Korean pop singer Psy’s “Gangnam Style” music video topped the Austrian chart in October 2012, the number and size of K-pop events in Austria sharply increased, with fans organizing various participatory events, including K-pop auditions, dance festivals, club meetings, quiz competitions, dance workshops, and smaller fan-culture gatherings. In the private sector, longtime fans have transitioned from participants to providers, and in the public sector, from observers to sponsors. Through in-depth interviews with event organizers, sponsors, and fans, this article offers an ethnographic study of the reception of K-pop in Europe that takes into consideration local interactions between fans and Korean sponsors, perspectives on the genre, patterns of social integration, and histories. As a case study, this research stresses the local situatedness of K-pop fan culture by arguing that local private and public sponsors and fans make the reception of K-pop different in each locality. By exploring local scenes of K-pop reception and fan culture, the article demonstrates the rapidly growing consumption of K-pop among Europeans and stresses multidirectional understandings of globalization.

  9. A measuring stand for a ducted fan aircraft propulsion unit

    Directory of Open Access Journals (Sweden)

    Hlaváček David

    2014-03-01

    Full Text Available The UL-39 ultra-light aircraft which is being developed by the Department of Aerospace Engineering, Faculty of Mechanical Engineering, Czech Technical University in Prague, is equipped with an unconventional ducted fan propulsion unit. The unit consists of an axial fan driven by a piston engine and placed inside a duct ended with a nozzle. This article describes the arrangement of a modernised measuring stand for this highly specific propulsion unit which will be able to measure the fan pressure ratio and velocity field in front of and behind the fan and its characteristic curve.

  10. High-resolution Geophysical Mapping of Submarine Glacial Landforms

    Science.gov (United States)

    Jakobsson, M.; Dowdeswell, J. A.; Canals, M.; Todd, B. J.; Dowdeswell, E. K.; Hogan, K. A.; Mayer, L. A.

    2014-12-01

    Glacial landforms are generated from the activity of glaciers and display spatial dimensions ranging from below one meter up to tens of kilometers. Glacial landforms are used as diagnostic features of past activity of ice sheets and glaciers; they are specifically important in the field of palaeoglaciology. Mapping of submarine glacial landforms is largely dependent on geophysical survey methods capable of imaging the seafloor and sub-bottom through the water column. Full "global" seafloor mapping coverage, equivalent to what exists for land elevation, is to-date only achieved by the powerful method of deriving bathymetry from altimeters on satellites like GEOSAT and ERS-1. The lateral resolution of satellite derived bathymetry is, however, limited by the footprint of the satellite and the need to average out local wave and wind effects resulting in values of around 15 km. Consequently, mapping submarine glacial landforms requires for the most part higher resolution than is achievable by satellite derived bathymetry. The most widely-used methods for mapping submarine glacial landforms are based on echo-sounding principles. This presentation shows how the evolution of marine geophysical mapping techniques, in particular the advent of side-scan and multibeam bathymetric sonars, has made it possible to study submarine glacial landforms in unprecedented detail. Examples are shown from the Atlas of Submarine Glacial Landforms: Modern, Quaternary and Ancient, which will be published in late 2015 in the Memoir Series of the Geological Society of London.

  11. Extreme Loading of Aircraft Fan Blade

    CERN Document Server

    Datta, Dibakar

    2013-01-01

    The response of an aircraft fan blade manufactured by composites under the action of static and impact load has been studied in this report. The modeling and analysis of the geometry has been done using CASTEM 2007 version. For the quasi static analysis, the pressure has been incrementally applied until it satisfies the failure criteria. The deformed configuration, strain, Von-Mises stress, and the deflection of the blade have been studied. The response of the system e.g. deformation time history due to the impact of the projectile has been studied where the Newmark method for the dynamic problem has been implemented.

  12. Condensate Accretion in Shock Tube's Expansion Fan

    Science.gov (United States)

    Mezonlin, Ephrem-Denis; DeSilva, Upul P.; Hunte, F.; Johnson, Joseph A., III

    1997-01-01

    It has been shown that turbulence and temperature influence the droplet sizes in expansion fan induced condensation by studying the Rayleigh scattering from one port in our shock tube's test section. We have modified our set-up so as to allow, using two ports, the real time measurement of the influence of turbulence and temperature on the rate at which these droplets grow. To do this, we looked at the Rayleigh scattering from two different ports for ten Reynolds numbers at five different temperatures. We modeled the time of flight of droplets, using the equations of one-dimensional gas dynamics and the measured shock wave speed in shock tube's driven section.

  13. Through flow analysis of pumps and fans

    Science.gov (United States)

    Neal, A. N.

    1980-08-01

    Incompressible through flow calculations in axial, mixed and centrifugal flow pumps and fans are described. An iterative scheme is used. A simple blade to blade model is applied on the surfaces of revolution defined by the meridional streamlines. This defines the fluid properties and the mean stream surface (S2 surface) for the next meridional solution. A computer program is available allowing the method to be applied for design purposes. APL is used for input and output and FORTRAN IV for computation. A typical calculation requires 30 sec of Univac 1100 time.

  14. 75 FR 1706 - Regulated Navigation Area; U.S. Navy Submarines, Hood Canal, WA

    Science.gov (United States)

    2010-01-13

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA11 Regulated Navigation Area; U.S. Navy Submarines, Hood... be in effect whenever any U.S. Navy submarine is operating in the Hood Canal and being escorted by the Coast Guard. The RNA is necessary to help ensure the safety and security of the submarines,...

  15. 77 FR 59749 - Safety Zone; Submarine Cable Installation Project; Chicago River, Chicago, IL

    Science.gov (United States)

    2012-10-01

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Submarine Cable Installation Project... intended to restrict vessels from a portion of the Chicago River due to the installation of submarine... the installation of submarine cables in the vicinity of both the West Adams Street and West...

  16. 75 FR 27638 - Regulated Navigation Area; U.S. Navy Submarines, Hood Canal, WA

    Science.gov (United States)

    2010-05-18

    ... No. USCG-2009-1058] RIN 1625-AA11 Regulated Navigation Area; U.S. Navy Submarines, Hood Canal, WA... whenever any U.S. Navy submarine is operating in that area and is being escorted by the Coast Guard. The RNA is necessary to help ensure the safety and security of the submarines, their Coast Guard...

  17. 47 CFR 32.6424 - Submarine and deep sea cable expense.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Submarine and deep sea cable expense. 32.6424 Section 32.6424 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES... Submarine and deep sea cable expense. (a) This account shall include expenses associated with submarine...

  18. 76 FR 78159 - Safety Zone; Submarine Cable Installation Project; Chicago River South Branch, Chicago, IL

    Science.gov (United States)

    2011-12-16

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Submarine Cable Installation Project... the installation of submarine cables in the vicinity of the Madison Street Bridge. This temporary... the installation of submarine cables in the vicinity of the Madison Street Bridge. Entry into...

  19. 33 CFR 165.1328 - Regulated Navigation Area; U.S. Navy submarines, Hood Canal, WA.

    Science.gov (United States)

    2010-07-01

    .... Navy submarines, Hood Canal, WA. 165.1328 Section 165.1328 Navigation and Navigable Waters COAST GUARD... § 165.1328 Regulated Navigation Area; U.S. Navy submarines, Hood Canal, WA. (a) Location. The following... whenever any U.S. Navy submarine is operating in the Hood Canal and is being escorted by the Coast...

  20. 78 FR 67086 - Safety Zone, Submarine Cable Replacement Operations, Kent Island Narrows; Queen Anne's County, MD

    Science.gov (United States)

    2013-11-08

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone, Submarine Cable Replacement Operations... safety of mariners and their vessels on navigable waters during submarine cable replacement operations at... installation of a submarine cable within a federal navigation channel requiring divers, a barge, and...

  1. Solution of Supplee's submarine paradox through special and general relativity

    Science.gov (United States)

    Vieira, R. S.

    2016-12-01

    In 1989 Supplee described an apparent relativistic paradox on which a submarine seems to sink to observers at rest within the ocean, but it rather seems to float in the submarine proper frame. In this letter, we show that the paradox arises from a misuse of the Archimedes principle in the relativistic case. Considering first the special relativity, we show that any relativistic force field can be written in the Lorentz form, so that it can always be decomposed into a static (electric-like) and a dynamic (magnetic-like) part. These gravitomagnetic effects provide a relativistic formulation of Archimedes principle, from which the paradox is explained. Besides, if the curved spacetime on the vicinity of the Earth is taken into account, we show that the gravitational force exerted by the Earth on a moving body must increase with the speed of the body. The submarine paradox is then analyzed again with this speed-dependent gravitational force.

  2. Contemporary sediment-transport processes in submarine canyons.

    Science.gov (United States)

    Puig, Pere; Palanques, Albert; Martín, Jacobo

    2014-01-01

    Submarine canyons are morphological incisions into continental margins that act as major conduits of sediment from shallow- to deep-sea regions. However, the exact mechanisms involved in sediment transfer within submarine canyons are still a subject of investigation. Several studies have provided direct information about contemporary sedimentary processes in submarine canyons that suggests different modes of transport and various triggering mechanisms. Storm-induced turbidity currents and enhanced off-shelf advection, hyperpycnal flows and failures of recently deposited fluvial sediments, dense shelf-water cascading, canyon-flank failures, and trawling-induced resuspension largely dominate present-day sediment transfer through canyons. Additionally, internal waves periodically resuspend ephemeral deposits within canyons and contribute to dispersing particles or retaining and accumulating them in specific regions. These transport processes commonly deposit sediments in the upper- and middle-canyon reaches for decades or centuries before being completely or partially flushed farther down-canyon by large sediment failures.

  3. Understanding losses in three core armoured submarine cables

    DEFF Research Database (Denmark)

    Silva, Filipe Miguel Faria da; Ebdrup, Thomas; Bak, Claus Leth

    2016-01-01

    . For practical an economical reasons the preferred choice of cable for both the array and the transmission cables are three-core armoured submarine cables. Therefore, it has becoming increasingly important to be able to calculate the ampacity of such cables accurately. At present time, the ampacity of three......-core armoured submarine cables is calculated according to IEC 60287-1-1 [1]. Various measurements conducted both by cable manufacturers and transmission system operators (TSO) have shown that using the cable rating method stated in IEC 60287-1-1 underestimates the cable ampacity [2]-[6]. Furthermore....... However, research performed in this paper shows that while the armour is responsible for the extra losses, the main calculation error for typical HVAC submarine cables may be in the screen’s loss factor (λ1). Overestimation of the cable losses may result in core cross-sections too large with more material...

  4. Attitudes to smoking on submarines: results of a questionnaire study.

    Science.gov (United States)

    Norris, William D; Brims, Fraser J H

    2002-07-01

    An anonymous survey to assess the attitudes to smoking of men serving on two Trident Nuclear submarines was conducted by questionnaire. A total of 244 questionnaires were completed, representing 87% of the two crews. Thirty-two percent of respondents declared themselves to be smokers, 69% were nonsmokers, and of these, 31% were ex-smokers. Attitudes of all respondents to an enforced ban of smoking on submarines indicated that 55% felt that it would be justifiable, 46% felt that it would be unfair, 42% felt that it was uncalled for, 46% thought that it would be illegal, and 47% thought that a ban was about time. The separate opinions of smokers and nonsmokers were polarized, whereas the overall results indicate indifferent attitudes of crew members. Further research into the atmospheric effects of environmental tobacco smoke on a submarine is required.

  5. A heuristic solution for the stability problem in conventional submarines

    Directory of Open Access Journals (Sweden)

    M. Sinclair

    2003-12-01

    Full Text Available Seafaring vessels must meet a few very obvious conditions in order to be of any use. The one condition is that they should stay afloat when loaded. The other condition is that they should float upright and with a level keel. The technical terms for these conditions are gravitational stability and trim. In practice some very precise numerical values are calculated for certain parameters in order to describe these conditions. After each refit of a submarine, the numerical values for the parameters referred to above must be recalculated. In the conventional submarines used by the South African Navy these new values must then be translated into the physical redistribution of weights housed in bays in the keel of the submarine. This paper discusses the problem of how this redistribution must be done in order to minimise the amount of work necessary. A heuristic algorithm is proposed by means of which a satisfactory redistribution may economically be computed.

  6. A Havelock Source Panel Method for Near-surface Submarines

    Institute of Scientific and Technical Information of China (English)

    Tim Gourlay; Edward Dawson

    2015-01-01

    A panel method is described for calculating potential flow around near-surface submarines. The method uses Havelock sources which automatically satisfy the linearized free-surface boundary condition. Outputs from the method include pressure field, pressure drag, wave resistance, vertical force, trim moment and wave pattern. Comparisons are made with model tests for wave resistance of Series 58 and DARPA SUBOFF hulls, as well as with wave resistance, lift force and trim moment of three length-to-diameter variants of the DSTO Joubert submarine hull. It is found that the Havelock source panel method is capable of determining with reasonable accuracy wave resistance, vertical force and trim moment for submarine hulls. Further experimental data are required in order to assess the accuracy of the method for pressure field and wave pattern prediction. The method is implemented in the computer code“HullWave”and offers potential advantages over RANS-CFD codes in terms of speed, simplicity and robustness.

  7. Active control of radiated pressure of a submarine hull

    Science.gov (United States)

    Pan, Xia; Tso, Yan; Juniper, Ross

    2008-03-01

    A theoretical analysis of the active control of low-frequency radiated pressure from submarine hulls is presented. Two typical hull models are examined in this paper. Each model consists of a water-loaded cylindrical shell with a hemispherical shell at one end and conical shell at the other end, which forms a simple model of a submarine hull. The conical end is excited by an axial force to simulate propeller excitations while the other end is free. The control action is implemented through a Tee-sectioned circumferential stiffener driven by pairs of PZT stack actuators. These actuators are located under the flange of the stiffener and driven out of phase to produce a control moment. A number of cost functions for minimizing the radiated pressure are examined. In general, it was found that the control system was capable of reducing more than half of the total radiated pressure from each of the submarine hull for the first three axial modes.

  8. The Evolution of the Surveyor Fan and Channel System, Gulf of Alaska based on Core-Log-Seismic Integration at IODP Site U1417

    Science.gov (United States)

    Morey, S.; Gulick, S. P. S.; Walton, M. A. L.; Swartz, J. M.; Worthington, L. L.; Reece, R.; Somchat, K.; Wagner, P. F.; Jaeger, J. M.; Mix, A. C.

    2015-12-01

    The transition to quasi-periodic ~100-kyr glacial cycles during the mid-Pleistocene transition (MPT, ~1.2 Ma) saw an acceleration of sediment delivery from the St. Elias orogen. Eroded sediment from the St. Elias Mountains is transferred to the deep sea via glacially carved shelf troughs and eventually to the Aleutian Trench via the Surveyor Channel and Fan system. By analyzing the submarine sediments in this Fan, we can evaluate the source-to-sink relationship between the erosion of an orogen and deep-sea deposition and inform our understanding of the impact of climate on local tectonics. Our work seeks to update depositional models of the unique sedimentary sequences, architecture, and origins of the glacially-fed Surveyor Fan using well-log-seismic correlation and new data from Integrated Ocean Drilling Program (IODP) Expedition 341. Exp. 341 results question proposed ages of major fan stratigraphic packages, necessitating this update. We created an integrated velocity model using discrete core-based p-wave velocities acquired at site U1417 from 100-152m, down-hole sonic log velocities from 152m-476m, and then projected the trend of the sonic log velocity from 476m to the base of the borehole. Previous work has interpreted the Sequence I/II boundary (~300 mbsf at U1417) to correspond with the start of the Surveyor Fan and the onset of tidewater glaciation in the late Miocene and the Sequence II/III boundary (~160 mbsf at U1417) to coincide with the intensification of glaciation and subsequent increase in sediment flux at the MPT. Our updated velocity model places these major sequence boundaries at the correct depths in borehole site U1417. We can use the revised velocity model to correlate lithologic, biostratigraphic, paleomagnetic, and logging data from the borehole/cores to seismic data, allowing for construction of a temporal model for the evolution of the Surveyor fan. We can then examine the relationship between glacial-interglacial cycle duration and

  9. Case study of French and Spanish fan reception of Game of Thrones

    Directory of Open Access Journals (Sweden)

    Mélanie Bourdaa

    2015-06-01

    Full Text Available The reception of the American TV show Game of Thrones (2011– by French and Spanish fans and nonfans is addressed via a qualitative methodology, the goal of which is to understand how European viewers perceive themselves as fans and what it means for them to be fans. Analysis of characteristics of a specifically European reception helps us learn what fan studies tell us about fans and what fans really think about fandoms.

  10. The Retarding Force on a Fan-Cart Reversing Direction

    Science.gov (United States)

    Aurora, Tarlok S.; Brunner, Bernard J.

    2011-01-01

    In introductory physics, students learn that an object tossed upward has a constant downward acceleration while going up, at the highest point and while falling down. To demonstrate this concept, a self-propelled fan cart system is used on a frictionless track. A quick push is given to the fan cart and it is allowed to move away on a track under…

  11. Female fans of men's football - a case study in Denmark

    DEFF Research Database (Denmark)

    Pfister, Gertrud Ursula; Lenneis, Verena; Mintert, Svenja-Maria

    2013-01-01

    to a 'man's world' and what are their roles in this 'male environment'? The statements of interviewees revealed that female fans have to cope with a measure of sexism, but that they can adopt the men's perspectives in order to be accepted as 'authentic fans'. Other women reacted on men's domination...

  12. Using Fan Fiction to Teach Critical Reading and Writing Skills

    Science.gov (United States)

    Kell, Tracey

    2009-01-01

    In this article, the author talks about fan fiction, which is defined by Jenkins (2008) as "original stories and novels which are set in the fictional universe of favorite television series, films, comics, games or other media properties." Fan fiction generally involves writing stories with a combination of established characters and established…

  13. Acoustic Measurements of an Uninstalled Spacecraft Cabin Ventilation Fan Prototype

    Science.gov (United States)

    Koch, L. Danielle; Brown, Clifford A.; Shook, Tony D.; Winkel, James; Kolacz, John S.; Podboy, Devin M.; Loew, Raymond A.; Mirecki, Julius H.

    2012-01-01

    Sound pressure measurements were recorded for a prototype of a spacecraft cabin ventilation fan in a test in the NASA Glenn Acoustical Testing Laboratory. The axial fan is approximately 0.089 m (3.50 in.) in diameter and 0.223 m (9.00 in.) long and has nine rotor blades and eleven stator vanes. At design point of 12,000 rpm, the fan was predicted to produce a flow rate of 0.709 cu m/s (150 cfm) and a total pressure rise of 925 Pa (3.72 in. of water) at 12,000 rpm. While the fan was designed to be part of a ducted atmospheric revitalization system, no attempt was made to throttle the flow or simulate the installed configuration during this test. The fan was operated at six speeds from 6,000 to 13,500 rpm. A 13-microphone traversing array was used to collect sound pressure measurements along two horizontal planes parallel to the flow direction, two vertical planes upstream of the fan inlet and two vertical planes downstream of the fan exhaust. Measurements indicate that sound at blade passing frequency harmonics contribute significantly to the overall audible noise produced by the fan at free delivery conditions.

  14. Procedure for Balancing an Air Distribution System with Decentralised Fans

    DEFF Research Database (Denmark)

    Gunner, Amalie; Hultmark, Göran; Vorre, Anders

    2015-01-01

    there is a potential for energy saving. In this study the calculated saving in the power consumption for the main fan was found to be 40%. The results also show that when dampers are replaced with decentralised fans with the same efficiency the overall power saving potential was 16%. In the study a mock-up...

  15. Amateur mythographies: Fan fiction and the myth of myth

    Directory of Open Access Journals (Sweden)

    Ika Willis

    2016-03-01

    Full Text Available This paper draws on classical scholarship on myth in order to critically examine three ways in which scholars and fans have articulated a relationship between fan fiction and myth. These are (1 the notion of fan fiction as a form of folk culture, reclaiming popular story from corporate ownership; (2 the notion of myth as counterhegemonic, often feminist, discourse; (3 the notion of myth as a commons of story and a universal story world. I argue that the first notion depends on an implicit primitivizing of fan fiction and myth, which draws ultimately on the work of Gottfried von Herder in the 18th century and limits our ability to produce historically and politically nuanced understandings of fan fiction. The second notion, which is visible in the work of Henry Jenkins and Constance Penley, is more helpful because of its attention to the politics of narration. However, it is the third model of myth, as a universal story world, where we find the richest crossover between fan fiction's creative power and contemporary classical scholarship on myth, especially in relation to Sarah Iles Johnston's analysis of hyperserial narrative. I demonstrate this through some close readings of fan fiction from the Greek and Roman Mythology fandom on Archive of Our Own. I conclude the paper by extending Johnston's arguments to show that fan-fictional hyperseriality, specifically, can be seen as mythic because it intervenes not only in the narrative worlds of its source materials but also in the social world of its telling.

  16. Gender constructions and negotiations of female football fans

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2015-01-01

    aims to give insight into gender constructions and negotiations of female football fans in the stands. Drawing on a social constructivist perspective to gender and Bourdieu's (1984) approaches to field, capital and habitus, we explored the experiences and opinions of female fans. The methods employed...

  17. 76 FR 50739 - Hung Ta Fan: Debarment Order

    Science.gov (United States)

    2011-08-16

    ... bases this order on a finding that Mr. Fan was convicted of a felony under Federal law for conduct... law). FDA's finding that debarment is appropriate is based on the felony conviction referenced herein... Thailand, when in fact he knew that the honey originated in China. Mr. Fan's actions allowed him to avoid...

  18. Simpler Variable-Speed Drive for Fan or Pump

    Science.gov (United States)

    Obler, H. D.

    1982-01-01

    Static pressure developed by a fan or pump is used directly to control its speed in a new drive unit. System is simpler and more economical than many other speed controllers, although it is less accurate and has a narrower speed range. However, since very accurate control is not usually required for fans and pumps, unit would work well in many applications.

  19. Facilitating Attuned Interactions: Using the FAN Approach to Family Engagement

    Science.gov (United States)

    Gilkerson, Linda

    2015-01-01

    Erikson Institute's Fussy Baby Network® (FBN) is a national model prevention program known for its approach to family engagement called the FAN (Gilkerson & Gray, 2014; Gilkerson et al., 2012). The FAN is both a conceptual framework and a practical tool to facilitate attunement in helping relationships and promote reflective practice. This…

  20. Wikipedia and participatory culture: Why fans edit [symposium

    Directory of Open Access Journals (Sweden)

    Paul Thomas

    2016-09-01

    Full Text Available Online, fans of popular culture media partake in participatory culture in various ways, such as writing fan fiction and scrutinizing media on message boards. Another way they do so is by editing relevant articles in the online encyclopedia Wikipedia. In fact, research has shown that Wikipedia articles skew heavily toward pop culture, suggesting that fans of pop culture are among the most enthusiastic of Wikipedia's editors. Of course, the question emerges: Why are pop culture fans in particular so interested in editing Wikipedia? Building on previous research, I argue that fans want to take part in the production of the media that they enjoy, that Wikipedia allows editors to create their own paratext (i.e., the Wikipedia article in relation to a main text (e.g., a movie, a television show, a book series, and that this paratext may be heavily used by the general public. Such usage is a form of implicit approval that affirms the editors' knowledge and encourages them to make more edits. Thus, Wikipedia validates the fan editor's work in a way that other outlets for participatory culture (e.g., fan fiction, fan art, songwriting cannot.

  1. Energy fan power consumption comparison of subway station HVAC system

    Institute of Scientific and Technical Information of China (English)

    JIANGYong; ZHUYingxin

    2003-01-01

    Subway thermal environment control system is a mass energy consumed system. The fan operation is the Key of energy saving. Some feasible fan operation modes are proposed and compared in this paper from the view of energy and operation cost saving. It is concluded that VAV is the optimal operation mode for metro system with highest energy saving.

  2. Nocturnal Fanning Suppresses Downy Mildew Epidemics in Sweet Basil.

    Directory of Open Access Journals (Sweden)

    Yigal Cohen

    Full Text Available Downy mildew is currently the most serious disease of sweet basil around the world. The oomycete causal agent Peronospora belbahrii requires ≥ 4h free leaf moisture for infection and ≥7.5h of water-saturated atmosphere (relative humidity RH≥95% at night for sporulation. We show here that continued nocturnal fanning (wind speed of 0.4-1.5 m/s from 8pm to 8am dramatically suppressed downy mildew development. In three experiments conducted during 2015, percent infected leaves in regular (non-fanned net-houses reached a mean of 89.9, 94.3 and 96.0% compared to1.2, 1.7 and 0.5% in adjacent fanned net-houses, respectively. Nocturnal fanning reduced the number of hours per night with RH≥95% thus shortened the dew periods below the threshold required for infection or sporulation. In experiments A, B and C, the number of nights with ≥4h of RH≥95% was 28, 10 and 17 in the non-fanned net-houses compared to 5, 0 and 5 in the fanned net-houses, respectively. In the third experiment leaf wetness sensors were installed. Dew formation was strongly suppressed in the fanned net-house as compared to the non-fanned net-house. Healthy potted plants became infected and sporulated a week later if placed one night in the non-fanned house whereas healthy plants placed during that night in the fanned house remained healthy. Infected potted basil plants sporulated heavily after one night of incubation in the non-fanned house whereas almost no sporulation occurred in similar plants incubated that night in the fanned house. The data suggest that nocturnal fanning is highly effective in suppressing downy mildew epidemics in sweet basil. Fanning prevented the within-canopy RH from reaching saturation, reduced dew deposition on the leaves, and hence prevented both infection and sporulation of P. belbahrii.

  3. Variable pitch fan system for NASA/Navy research and technology aircraft

    Science.gov (United States)

    Ryan, W. P.; Black, D. M.; Yates, A. F.

    1977-01-01

    Preliminary design of a shaft driven, variable-pitch lift fan and lift-cruise fan was conducted for a V/STOL Research and Technology Aircraft. The lift fan and lift-cruise fan employed a common rotor of 157.5 cm diameter, 1.18 pressure ratio variable-pitch fan designed to operate at a rotor-tip speed of 284 mps. Fan performance maps were prepared and detailed aerodynamic characteristics were established. Cost/weight/risk trade studies were conducted for the blade and fan case. Structural sizing was conducted for major components and weights determined for both the lift and lift-cruise fans.

  4. Constructive measures for handling submarine desalination plants. Konstruktive Massnahmen zur Handhabung submariner Entsalzungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Drude, B.C.; Klapp, E.; Peters, T.

    1978-11-23

    The erection and the periodical repair works of a submarine desalination plant are made easier by the separate construction of the main components, as such a membrane body for the desalination and the fresh water conveying device, both in pressure-proof vessels and by the light-weight construction method. Considerable membrane surfaces for the desalination by reverse osmosis are wound spirally around a collecting vessel of fresh water. The vessel is made of glass-fiber reinforced plastics or another light material. The main components are connected by sufficiently long and flexible pipes by which the handling of the parts is simplified during erection. This is particularly advantageous if several desalination aggregates are fed by one conveyor system.

  5. Costs and benefits of energy efficiency improvements in ceiling fans

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Nihar; Sathaye, Nakul; Phadke, Amol; Letschert, Virginie [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technology Division

    2013-10-15

    Ceiling fans contribute significantly to residential electricity consumption, especially in developing countries with warm climates. The paper provides analysis of costs and benefits of several options to improve the efficiency of ceiling fans to assess the global potential for electricity savings and green house gas (GHG) emission reductions. Ceiling fan efficiency can be cost-effectively improved by at least 50% using commercially available technology. If these efficiency improvements are implemented in all ceiling fans sold by 2020, 70 terawatt hours per year could be saved and 25 million metric tons of carbon dioxide equivalent (CO2-e) emissions per year could be avoided, globally. We assess how policies and programs such as standards, labels, and financial incentives can be used to accelerate the adoption of efficient ceiling fans in order to realize potential savings.

  6. Portable Fan Assembly for the International Space Station

    Science.gov (United States)

    Jenkins, Arthur A.; Roman, Monsi C.

    1999-01-01

    NASA/ Marshall Space Flight Center (NASA/MSFC) is responsible for the design and fabrication of a Portable Fan Assembly (PFA) for the International Space Station (ISS). The PFA will be used to enhance ventilation inside the ISS modules as needed for crew comfort and for rack rotation. The PFA consists of the fan on-orbit replaceable unit (ORU) and two noise suppression packages (silencers). The fan ORU will have a mechanical interface with the Seat Track Equipment Anchor Assembly, in addition to the power supply module which includes a DC-DC converter, on/standby switch, speed control, power cable and connector. This paper provides a brief development history, including the criteria used for the fan, and a detailed description of the PFA operational configurations. Space Station requirements as well as fan performance characteristics are also discussed.

  7. Sediment velocities from sonobuoys: Bengal Fan, Sunda Trench, Andaman Basin, and Nicobar Fan

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, E.L.; Bachman, R.T.; Curray, J.R.; Moore, D.G.

    1977-07-10

    New measurements of interval compressional wave velocities were made in the first sediment layer using the sonobuoy technique during two expeditions in the Bay of Bengal, in the Andaman Sea, and over the Nicobar Fan and Sunda Trench. Sediment interval velocities from these areas were added to those previously reported, and revised diagrams and regression equations of instantaneous and mean velocity versus one-way travel time are furnished for four areas of the Bengal Fan, and for the Anadman Basin, Nicobar Fan, Sunda Trench. The velocity gradients directly below the sea floor were used to separate the Bengal Fan into four geoacoustic provinces. In the north and west the velocity gradients are 0.86 and 1.28 s/sup -1/, respectively, whereas in the central part of the fan the gradient is 1.87 s/sup -1/. These variations indicate lesser increases of velocity with depth in the sea floor in the north and west, and they are probably due to more rapid deposition, less consolidation, and less lithification near the riverine source areas of the sediments. The near-surface velocity gradients in the other areas are the Andaman Basin, 1.53 s/sup -1/, the Nicobar Fan 1.63 s/sup -1/, and the Sunda Trench, 1.41 s/sup -1/. The linear velocity gradients (from the sediment surface to a given travel time) in 17 areas of the Indian Ocean, Pacific area, Atlantic Ocean, and Gulf of Mexico were averaged at each 0.1 s from 0 to 0.5 s of one-way travel time. These averaged gradients ranged from 1.32 s/sup -1/ at t=0 to 0.76 s/sup -1/ at t=0.5 s. The regression equation for the velocity gradients a, in s/sup -1/, as a function of one-way travel time t, in seconds, is a=1.316-1.117t (for use from t=0 to 0.5 s). These average velocity gradients can be used with sediment surface velocities and one-way travel times (measured from reflection records) to compute sediment layer thickness in areas of turbidites lacking interval velocity measurements in the first sediment layer.

  8. Depositional architecture and developing settings of largescale incised valley and submarine gravity flow systems in the Yinggehai and Qiongdongnan basins, South China Sea

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In the Ying-Qiong basins in the South China Sea developed a setof giant inner shelf slope and submarine gravity flow deposits in the Ying-Huang formations since the Late Miocene. These deposits can be classified into 9 sequences in which slope slump-debris flow, slope fan and particularly, the large-scale axial basin-floor incised valley fills have been recognized. They were distributed in a distinctive pattern attributed to tectonic control. The development of shelf slopes and abyssal plains in the basins was related to the last episode of rapid subsidence and a large amount of sediment inputs. Large-scale basin-floor incised valleys, formed during the late Miocene and Pliocene, indicate several major sea level falls that occurred in the South China Sea.

  9. Development of a Fan for Future Space Suit Applications

    Science.gov (United States)

    Paul. Heather L.; Converse, David; Dionne, Steven; Moser, Jeff

    2010-01-01

    NASA's next generation space suit system will place new demands on the fan used to circulate breathing gas through the ventilation loop of the portable life support system. Long duration missions with frequent extravehicular activities (EVAs), the requirement for significant increases in reliability and durability, and a mission profile that imposes strict limits on weight, volume and power create the basis for a set of requirements that demand more performance than is available from existing fan designs. This paper describes the development of a new fan to meet these needs. A centrifugal fan was designed with a normal operating speed of approximately 39,400 rpm to meet the ventilation flow requirements while also meeting the aggressive minimal packaging, weight and power requirements. The prototype fan also operates at 56,000 rpm to satisfy a second operating condition associated with a single fan providing ventilation flow to two spacesuits connected in series. This fan incorporates a novel nonmetallic "can" to keep the oxygen flow separate from the motor electronics, thus eliminating ignition potential. The nonmetallic can enables a small package size and low power consumption. To keep cost and schedule within project bounds a commercial motor controller was used. The fan design has been detailed and implemented using materials and approaches selected to address anticipated mission needs. Test data is presented to show how this fan performs relative to anticipated ventilation requirements for the EVA portable life support system. Additionally, data is presented to show tolerance to anticipated environmental factors such as acoustics, shock, and vibration. Recommendations for forward work to progress the technology readiness level and prepare the fan for the next EVA space suit system are also discussed.

  10. Alluvial Fan Morphology, distribution and formation on Titan

    Science.gov (United States)

    Birch, S. P. D.; Hayes, A. G.; Howard, A. D.; Moore, J. M.; Radebaugh, J.

    2016-05-01

    Titan is a hydrologically active world, with dozens of alluvial fans that are evidence of sediment transport from high to low elevations. However, the distribution and requirements for the formation of fans on Titan are not well understood. We performed the first global survey of alluvial fans on Titan using Cassini Synthetic Aperture Radar (SAR) data, which cover 61% of Titan's surface. We identified 82 fans with areas ranging from 28 km2 to 27,000 km2. A significant fraction (∼60%) of the fans are restricted to latitudes of ±50-80°, suggesting that fluvial sediment transport may have been concentrated in the near-polar terrains in the geologically recent past. The density of fans is also found to be correlated with the latitudes predicted to have the highest precipitation rates by Titan Global Circulation Models. In equatorial regions, observable fans are not generally found in proximity to dune fields. Such observations suggest that sediment transport in these areas is dominated by aeolian transport mechanisms, though with some degree of recent equatorial fluvial activity. The fan area-drainage area relationship on Titan is more similar to that on Earth than on Mars, suggesting that the fans on Titan are smaller than what may be expected, and that the transport of bedload sediment is limited. We hypothesize that this has led to the development of a coarse gravel-lag deposit over much of Titan's surface. Such a model explains both the morphology of the fans and their latitudinal concentration, yielding insight into the sediment transport regimes that operate across Titan today.

  11. Life, death and revival of debris-flow fans on Earth and Mars : fan dynamics and climatic inferences

    NARCIS (Netherlands)

    de Haas, T.

    2016-01-01

    Alluvial fans are ubiquitous landforms in high-relief regions on Earth and Mars. They have a semi-conical shape and are located at the transition between highlands and adjacent basins. Alluvial fans can form by a range of processes including debris flows, which are water-laden masses of soil and

  12. Life, death and revival of debris-flow fans on Earth and Mars : fan dynamics and climatic inferences

    NARCIS (Netherlands)

    de Haas, T.

    2016-01-01

    Alluvial fans are ubiquitous landforms in high-relief regions on Earth and Mars. They have a semi-conical shape and are located at the transition between highlands and adjacent basins. Alluvial fans can form by a range of processes including debris flows, which are water-laden masses of soil and roc

  13. Life, death and revival of debris-flow fans on Earth and Mars : fan dynamics and climatic inferences

    NARCIS (Netherlands)

    de Haas, T.

    2016-01-01

    Alluvial fans are ubiquitous landforms in high-relief regions on Earth and Mars. They have a semi-conical shape and are located at the transition between highlands and adjacent basins. Alluvial fans can form by a range of processes including debris flows, which are water-laden masses of soil and roc

  14. Preliminary Source Characterization and Tsunami Modeling of Submarine Landslides along the Yucatan Shelf/Campeche Escarpment, southern Gulf of Mexico

    Science.gov (United States)

    Chaytor, J. D.; Geist, E. L.; Paull, C. K.; Caress, D. W.; Gwiazda, R.; Fucugauchi, J. U.; Rebolledo-Vieyra, M.

    2014-12-01

    Using high-resolution multibeam bathymetry recently collected by the R/V Falkor, we evaluated the morphology, size, and tsunami-generating potential of a number of large, previously unknown, submarine landslides that excavated sections of the submerged Yucatan Shelf/carbonate platform above the Campeche Escarpment. Landslide evacuations appear to be primarily restricted to the later Cenozoic sections of the margin, removing pelagic sediments deposited above the Cretaceous shallow water carbonates exposed along the face of the escarpment. The largest landslides have evacuated areas of the shelf between 130 and 1,100 km2, possibly removing as much as 70 km3 of material in a single event. Based on the morphology of the evacuated areas, the primary mode of failure appears to be translational and retrogressive, with slide thickness primarily stratigraphically controlled. Displaced material appears to be present within some of the evacuation zones, but because sediments from the Mississippi Fan onlap the base of the Campeche Escarpment, mass-transport deposits from individual landslides have not been identified and therefore run-outs are poorly constrained. The evacuation zones are used to specify the initial conditions for tsunami modeling. Both regional, Gulf of Mexico and near-field simulations are performed to determine the severity and wave-height distribution for six slide scenarios. Preliminary results indicate that the location of maximum wave heights associated with the slide scenarios depend on the direction on down-slope slide movement, although there are significant refraction effects during basin-wide propagation. There is also significant energy dissipation during cross-shelf propagation, with wider shelves lessening the severity of tsunami runup compared to runup at coastal locations adjacent to narrower shelves. Future tsunami hazard assessments in the Gulf of Mexico should account for these large, newly discovered submarine landslides.

  15. The impact of evolving current rheology on multi-scale heterogeneity in submarine lobe strata: an example from the Upper Cretaceous Point Loma Formation, San Diego, California

    Science.gov (United States)

    McGlown, A.; Mohrig, D. C.; Perillo, M. M.

    2014-12-01

    Increasing recognition of transitional flow deposits in submarine fans has shown that the evolution of flow rheology in sediment-gravity currents can have a significant impact on the heterogeneity of deepwater sediment accumulations. Sea-cliff exposure of the Cretaceous Point Loma Formation in San Diego, California, provides a unique opportunity to document the internal variability and spatial distribution of thin, fine-grained event beds. Upper portions of beds which commonly appear as featureless mud in exposures of typical quality are revealed as thin, clast-rich debrites in areas where sea cliffs are polished by waves. The ubiquity of these deposits in distal lobe strata suggests complex rheological evolution for nearly all currents that were able to run out to lobe margins. Here we supplement qualitative outcrop characterization with statistical analysis to quantify relationships between deposit thickness, grain size, and the spatial distribution of sedimentary facies. Intervals dominated by transitional flow deposits are shown to occur vertically near the base of coarsening-upward successions and laterally toward lobe margins, reflecting a combination of dynamic processes during individual events and the spatial distribution of consecutive deposits. We show that the ability to distinguish patterns of bed-scale variability reflecting flow evolution from patterns associated with larger-scale processes, such as distributary channel avulsion and compensational stacking, is critical if one is to accurately model heterogeneity within submarine fan systems. Furthermore, the observation that thin, fine-grained debrites can be nearly impossible to distinguish from featureless mud intervals unless exceptionally well-exposed may cast doubt on existing interpretations where outcrop quality is less than remarkable.

  16. Operating Below Crush Depth: The Formation, Evolution, and Collapse of the Imperial Japanese Navy Submarine Force in World War II

    Science.gov (United States)

    2011-06-10

    Subamrine, Medium) LCDR Lieutenant Commander LT Lieutenant NM Nautical Mile RADM Rear Admiral ST Sen- Taka (Submarine, High Speed) STo Sen-Toku...Special Submarine) STS Sen- Taka -Sho (Submarine, High Speed(Victory)) USS United States Ship VADM Vice Admiral 1 CHAPTER 1 INTRODUCTION On...Kirai-Sen meaning Mine-Layer, KT for Kai-Toku-Chu meaning Medium, Special Submarine, ST for Sen- Taka meaning Submarine, High speed, STo for Sen Toku

  17. Anti-submarine warfare with continuously active sonar

    NARCIS (Netherlands)

    Vossen, R. van; Beerens, S.P.; Spek, E. van der

    2011-01-01

    Existing surveillance sonar systems for anti-submarine warfare (ASW) use a pulsed sonar deployed at a low duty cycle. Continuously active sonar (CAS) is of special interest since the technique could provide better detection performance than conventional pulsed sonar, and it will provide the operator

  18. Investigating Outfitting Density as a Cost Driver in Submarine Construction

    Science.gov (United States)

    2015-09-01

    35 b. Compensated Gross Tonnage .................................................36 c. Acoustic Requirements and the Effect on Procurement...hours inside the hull. Previously, submarines were assembled piece by piece on location, typically on the shipbuilding ways or inclined railway . The...ultimate capability for ASW, ISR and polar missions, and was fast, acoustically superior and could navigate in deeper waters than any other fast

  19. Losses in armoured three-phase submarine cables

    DEFF Research Database (Denmark)

    Ebdrup, Thomas; Silva, Filipe Miguel Faria da; Bak, Claus Leth

    2014-01-01

    The number of offshore wind farms will keep increasing in the future as a part of the shift towards a CO2 free energy production. The energy harvested from the wind farm must be brought to shore, which is often done by using a three-phase armoured submarine power cable. The use of an armour...

  20. Cold-water coral banks and submarine landslides: a review

    Science.gov (United States)

    de Mol, Ben; Huvenne, Veerle; Canals, Miquel

    2009-06-01

    This paper aims to review the relation between cold-water coral bank development and submarine landslides. Both are common features on continental margins, but so far it has not been reviewed which effect—if at all—they may have upon each other. Indirect and direct relations between coral banks and landslides are evaluated here, based on four case studies: the Magellan Mound Province in the Porcupine Seabight, where fossil coral banks appear partly on top of a buried slide deposit; the Sula Ridge Reef Complex and the Storegga landslide both off mid-Norway; and the Mauritania coral bank province, associated with the Mauritanian Slide Complex. For each of these locations, positive and negative relationships between both features are discussed, based on available datasets. Locally submarine landslides might directly favour coral bank development by creating substratum where corals can settle on, enhancing turbulence due to abrupt seabed morphological variations and, in some cases, causing fluid seepage. In turn, some of these processes may contribute to increased food availability and lower sedimentation rates. Landslides can also affect coral bank development by direct erosion of the coral banks, and by the instantaneous increase of turbidity, which may smother the corals. On the other hand, coral banks might have a stabilising function and delay or stop the headwall retrogradation of submarine landslides. Although local relationships can be deduced from these case studies, no general and direct relationship exists between submarine landslides and cold-water coral banks.

  1. New fuel cell plants and power sources for submarines

    Energy Technology Data Exchange (ETDEWEB)

    Nikiforov, B.; Sokolov, V. [CDB ME ' ' Rubin' ' (Russian Federation)

    2000-07-01

    The existing storage batteries for submarines have been analyzed, the quality of their design has been estimated and a power plant with electrochemical generators (fuel cells) has been suggested as an electric energy source. The history and the status of power plant design in Russia have been reflected. (authors)

  2. TNMG to Make a Profit on Submarine Mine

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>TNMG released a notice indicating that it and Nautilus Minerals Niugini Limited (hereinafter referred to as "Nautilus Mining Company"), on April 21, signed major clauses of the cooperative agreement concerning submarine ore processing of Bismarck Sea Solwara project in

  3. Submarine barite-opal rocks of hydrothermal origin.

    Science.gov (United States)

    Bertine, K K; Keene, J B

    1975-04-11

    Unusual submarine rocks consisting of barite, opal, and volcanic detritus were recovered from the Lau Basin northeast of Australia. It is proposed that these rocks were formed when hydrothermal solutions emanating from a fracture zone offsetting the active spreading center in the Lau Basin came into contact with cooler ocean waters.

  4. Aerodynamic Modelling and Optimization of Axial Fans

    DEFF Research Database (Denmark)

    Sørensen, Dan Nørtoft

    A numerically efficient mathematical model for the aerodynamics oflow speed axial fans of the arbitrary vortex flow type has been developed.The model is based on a blade-element principle, whereby therotor is divided into a number of annular streamtubes.For each of these streamtubes relations...... for velocity, pressure andradial position are derived from the conservationlaws for mass, tangential momentum and energy.The resulting system of equations is non-linear and, dueto mass conservation and pressure equilibrium far downstream of the rotor,strongly coupled.The equations are solved using the Newton...... distributionsof pitch angle and chord length have been chosen as independent variablesin the optimizations.Besides restricting the geometry of the rotor,constraints have been added to ensure a required pressure rise as well asnon-stalled flow conditions.Optimizations have been performed tomaximize the mean value...

  5. A generalization of Ky Fan's inequality

    Directory of Open Access Journals (Sweden)

    Peng Gao

    2001-01-01

    defined by f(x,y=0 and 0Fan's inequality. We also present some results on the comparison of Pn,sα(y−Pn,rα(y and Pn,sα(x−Pn,rα(x for s≥r, α∈ℝ.

  6. Failure analysis of air fan blades

    Institute of Scientific and Technical Information of China (English)

    WANG Yan-qing; JI Zhe; CUI Yong-li; CUI Chun-zhi; SUN Zhi

    2008-01-01

    The failure of all 12 blades of an air fan was investigated by metallurgical and mechanical experiments and an examina-tion of the fracture surface. The experimental results show that the cast aluminium-silicon alloy without any modification had a number of material defects, such as coarse grains, a loose structure, a large number of shrinkage holes, a long and thin bold-pin shaped silicon-phase, poor material strength and serious brittleness. In addition, installed on the spindle without elastic conjunction,blade No. 10 vibrated and inevitably.spun off due to the large centrifugal force. Therefore, blade No. 10 first cracked at the locking handle, then broke at the root, which caused all the other 11 blades to be broken by the crack of blade No.10.

  7. An ongoing large submarine landslide at the Japan trench

    Science.gov (United States)

    Nitta, S.; Kasaya, T.; Miura, S.; Kawamura, K.

    2013-12-01

    This paper deals with an active submarine landslide on a landward trench slope in the Japan trench. Studied area is located on the upper terrace ranging from 400 to 1200 m in water depth, off Sendai, northeast Japan. We have surveyed in detail the seabed topography using a multi narrow beam (hereafter MBES) and a subbottom profiler (hereafter SBP) during the cruise MR12-E02 of R/V Mirai. The survey lines were 12 lines in N-S, and 3 lines in E-W, and situated in the region from 141°45'E, 37°40'N to 142°33'E, 38°32'N. Moreover, we used multi-channel seismic profile by the cruise KR04-10 of R/V Kairei in the interpretation of the SBP results. In general, horseshoe-shaped depressions of about 100 km wide along the trench slope are arrayed along the Japan trench. It has thought that they were formed by large submarine landslides, but we could not understand critically the relationship between the depressions and the submarine landslides. Based on the survey results, we found signals of an active submarine landslide in the depression as follows. 1) We observed arcuate-shaped lineaments, which are sub-parallel to a horseshoe-shaped depression. The lineaments concentrate in the south region from 38°N at about 20 km wide. These lineaments are formed by deformation structures as anticlines, synclines and normal fault sense displacements. 2) Most of the synclines and anticlines are not buried to form the lineaments. 3) Normal faults cutting about 1 km deep are observed in a multi-channel seismic profile. The normal faults are located just below the arcuate-shaped lineaments, and are tilted eastward being the downslope direction. It indicates a large submarine landslide. We concluded that the arcuate-shaped lineaments were generated by surface sediment movement with the submarine landsliding. We think that the submarine landslide of about 20 km wide and about 1 km thick move continuously down the landward trench slope. This would be the formation process of the horseshoe

  8. Soap operas and the history of fan discussion

    Directory of Open Access Journals (Sweden)

    Sam Ford

    2008-09-01

    Full Text Available For decades, fans of U.S. soap operas have formed social networks surrounding their shows, and they did so even before the concept entered the vernacular. Soap fans, who started on a geographically local scale and built their communities through grassroots efforts, have found a variety of venues to connect with one another over the past several decades. This study looks at the pre-Internet development of these social networks to show how that trajectory relates to the current online community of soap opera fans. Although several scholars have studied soap opera fandom, few have taken an historical approach at understanding the trajectory of soap fandom, a view especially necessary in an era where online social networks are at the center of audience studies and where cornerstone U.S. soap operas are struggling to retain relevance and audience. To fill this gap, I argue that understanding fan networks today requires looking back to previous methods of fan networking. Soaps' longevity (the youngest U.S. soap is more than 20 years old and frequency (all U.S. daytime soaps are daily make them crucial texts in demonstrating how the roots of fan social networks in a pre-Internet era helped shape that fandom's transition onto the Internet, and they also illustrate the continued evolution of these networks as fans move online.

  9. Experimental determination of tunnel ventilation axial ducted fan performance

    Directory of Open Access Journals (Sweden)

    Šekularac Milan B.

    2016-01-01

    Full Text Available To investigate traffic tunnel ventilation flows, a scaled model of a traffic tunnel with longitudinal ventilation system based on ducted fans is used. Flows in tunnels are influenced by tunnel geometry, fan characteristics, ventilation operation scenario, vehicle traffic, atmospheric factors, etc. To analyze flow fields of tunnels in detail, knowledge of tunnel jet-fan properties and turbulent flow characteristics at the fan exit are required, and can be used as input data for CFD boundary conditions of tunnel flow computation. For this purpose experimental measurements were done using the hot wire anemometry technique. The obtained results, trough ensemble-averaged and time averaged profiles of all velocity components, turbulence intensity, turbulent kinetic energy, integral flow length scales, available Reynolds stresses, Turbulent kinetic energy production rates and the fan thrust performance, are presented. These data allow us to analyze in more detail the influence of fan flow on energy and pollutant removal efficiencies of the tunnel ventilation and to evaluate accuracy of CFD studies on fan improvements.

  10. Reactive control of subsonic axial fan noise in a duct.

    Science.gov (United States)

    Liu, Y; Choy, Y S; Huang, L; Cheng, L

    2014-10-01

    Suppressing the ducted fan noise at low frequencies without varying the flow capacity is still a technical challenge. This study examines a conceived device consisting of two tensioned membranes backed with cavities housing the axial fan for suppression of the sound radiation from the axial fan directly. The noise suppression is achieved by destructive interference between the sound fields from the axial fan of a dipole nature and sound radiation from the membrane via vibroacoustics coupling. A two-dimensional model with the flow effect is presented which allows the performance of the device to be explored analytically. The air flow influences the symmetrical behavior and excites the odd in vacuo mode response of the membrane due to kinematic coupling. Such an asymmetrical effect can be compromised with off-center alignment of the axial fan. Tension plays an important role to sustain the performance to revoke the deformation of the membrane during the axial fan operation. With the design of four appropriately tensioned membranes covered by a cylindrical cavity, the first and second blade passage frequencies of the axial fan can be reduced by at least 20 dB. The satisfactory agreement between experiment and theory demonstrates that its feasibility is practical.

  11. Characterizing subsurface hydraulic heterogeneity of alluvial fan using riverstage fluctuations

    Science.gov (United States)

    Wang, Yu-Li; Yeh, Tian-Chyi Jim; Wen, Jet-Chau; Huang, Shao-Yang; Zha, Yuanyuan; Tsai, Jui-Pin; Hao, Yonghong; Liang, Yue

    2017-04-01

    The objective of this study is to demonstrate the ability of riverstage tomography to estimate 2-D spatial distribution of hydraulic diffusivity (D) of Zhuoshui River alluvial fan, Taiwan, using groundwater level data from 65 wells and stream stage data from 5 gauging stations. In order to accomplish this objective, wavelet analysis is first conducted to investigate the temporal characteristics of groundwater level, precipitation, and stream stage. The results of the analysis show that variations of groundwater level and stream stage are highly correlated over seasonal and annual periods while that between precipitation is less significant. Subsequently, spatial cross-correlation between seasonal variations of groundwater level and riverstage data is analyzed. It is found that the correlation contour map reflects the pattern of sediment distribution of the fan. This finding is further substantiated by the cross-correlation analysis using both noisy and noise-free groundwater and riverstage data of a synthetic aquifer, where aquifer heterogeneity is known exactly. The ability of riverstage tomography is then tested with these synthetic data sets to estimate D distribution. Finally, the riverstage tomography is applied to the alluvial fan. The results of the application reveal that the apex and southeast of the alluvial fan are regions with relatively high D and the D values gradually decrease toward the shoreline of the fan. In addition, D at northern alluvial fan is slightly larger than that at southern. These findings are consistent with the geologic evolution of this alluvial fan.

  12. Fans of Columbine shooters Eric Harris and Dylan Klebold

    Directory of Open Access Journals (Sweden)

    Andrew Ryan Rico

    2015-09-01

    Full Text Available On April 20, 1999, Eric Harris and Dylan Klebold murdered 12 students and one teacher at Columbine High School in Littleton, Colorado, in what was then the deadliest school shooting in American history. Despite causing a national panic and serving as a flash point for larger narratives on bullying, gun control, and media violence, both boys have gained active online fans. These fandoms dedicated to the Columbine shooters are widely referred to as dark examples of Internet communities, while the fans are also frequently denigrated as unstable and violent outcasts. Such dark online fandoms are yet to permeate mainstream culture or to challenge the preexisting perception of these communities as breeding grounds for the next wave of school shooters. While studies have covered the types of fans and their myriad interests, the field remains focused on more conventional examples of fan communities. In an effort to challenge and expand the object of focus when we study fandom, this qualitative study examines Columbine fans and their activity in order to understand the dominant motives they appear to have for engaging with and around such controversial figures and then concludes by exploring how this community might help us reflect more broadly on our concept of fandom. Redeeming these fans as part of diverse and complex communities of social relevance can demonstrate how even a dark fandom such as that of these Columbine shooters provides valuable cultural insights and benefits the field of fan studies.

  13. The distinction of submarine mass failure deposits from tsunami backwash deposits - an example from Hornitos, Northern Chile

    Science.gov (United States)

    Spiske, M.; Bahlburg, H.; Weiss, R.

    2013-12-01

    Sedimentary features of onshore tsunami deposits were studied in great detail within the last decade. While the characteristics of such onshore deposits are well documented, the associated marine tsunami effects, such as sediment dispersion, re-deposition, and sediment bypassing during runup and backwash are scarcely reported. The knowledge of the appearance of submarine tsunami features is important, not only to understand the hydrodynamic processes involved, but also because pre-Quaternary sediments tend to be of marine origin when extending the geological record farther into the past. In this study we challenge the former interpretation of a backwash tsunami origin of a Pliocene coarse clast unit at Hornitos that was previously linked to the Eltanin impact tsunami. The respective unit contains several tens of meters long rock slabs and components from both the shallow marine basin and onshore environments, such as alluvial fans, beaches, cliffs and the local basement rocks. It is intercalated into breccia layers of smaller scale that represent the likewise energetic background sedimentation. The unit was most likely emplaced by a high-density flow with possible hydroplaning at its base and front. This is underlined by soft-sediment deformation and sand dykes. The comparison to recent submarine tsunami sediments shows that there are hardly any similarities, most notably because the unit at Hornitos was deposited en masse without any obvious trends. Our re-interpretation considers the local synsedimentary tectonic background and a comparison to recent submarine tsunami sediments caused by tsunamis with similar onshore wave heights. We show that a relation to the Eltanin impact can be excluded because enhanced models that include a shoaling effect as soon as the tsunami approaches shallow shelf regions prove that such an impact did not entail large onshore wave heights at Hornitos. Additionally, the biostratigraphic age of the La Portada formation is not

  14. A submarine perspective of the Honolulu Volcanics, Oahu

    Science.gov (United States)

    Clague, David A.; Paduan, Jennifer B.; McIntosh, William C.; Cousens, Brian L.; Davis, Alicé S.; Reynolds, Jennifer R.

    2006-03-01

    Lavas and volcaniclastic deposits were observed and collected from 4 submarine cones that are part of the Honolulu Volcanics on Oahu, Hawaii. The locations of these and a few additional, but unsampled, vents demonstrate that nearly all the vents are located on or very close to the shoreline of Oahu, with the most distal vent just 12 km offshore. The clastic samples and outcrops range from coarse breccias to cross-bedded ash deposits and show that explosive volcanism at depths between about 350 and 590 m depth played a part in forming these volcanic cones. The eruptive styles appear to be dominantly effusive to strombolian at greater depths, but apparently include violent phreatomagmatic explosive activity at the shallower sites along the submarine southwest extension of the Koko Rift. The compositions of the recovered samples are broadly similar to the strongly alkalic subaerial Honolulu Volcanics lavas, but the submarine lavas, erupted further from the Koolau caldera, have slightly more radiogenic Sr isotopic ratios, and trace element patterns that are distinct from either the subaerial Honolulu Volcanics or the submarine North Arch lavas. These patterns are characterized by moderate to strong positive Sr and P anomalies, and moderate to strong negative Cs, Rb, U, Th, Zr, and Hf anomalies. Most samples have strong negative K and moderate negative Ti anomalies, as do all subaerial Honolulu Volcanics and North Arch samples, but one group of samples from the Koko Rift lack this chemical signature. The data are consistent with more garnet in the source region for the off-shore samples than for either the on-shore Honolulu Volcanics lavas. New Ar-Ar ages show that eruptions at the submarine vents and Diamond Head occurred between about 0.5 Ma and 0.1 Ma, with the youngest ages from the Koko Rift. These ages are in general agreement with most published ages for the formation and suggest that some much younger ages reported previously from the Koko Rift are probably

  15. Titan Submarine: Exploring The Depths of Kraken Mare

    Science.gov (United States)

    Oleson, Steven R.; Lorenz, Ralph D.; Paul, Michael V.

    2015-01-01

    The conceptual design of a submarine for Saturn's moon Titan was a funded NASA Innovative Advanced Concepts (NIAC) Phase I for 2014. The effort investigated what science a submarine for Titan's liquid hydrocarbon approximately 93 Kelvin (-180 degrees Centigrade) seas might accomplish and what that submarine might look like. Focusing on a flagship class science system (approximately100 kilograms) it was found that a submersible platform can accomplish extensive and exciting science both above and below the surface of the Kraken Mare The submerged science includes mapping using side looking sonar, imaging and spectroscopy of the sea at all depths, as well as sampling of the sea's bottom and shallow shoreline. While surfaced the submarine will not only sense weather conditions (including the interaction between the liquid and atmosphere) but also image the shoreline, as much as 2 kilometers inland. This imaging requirement pushed the landing date to Titan's next summer period (approximately 2047) to allow for continuous lighted conditions, as well as direct-to-Earth (DTE) communication, avoiding the need for a separate relay orbiter spacecraft. Submerged and surfaced investigation are key to understanding both the hydrological cycle of Titan as well as gather hints to how life may have begun on Earth using liquid/sediment/chemical interactions. An estimated 25 megabits of data per day would be generated by the various science packages. Most of the science packages (electronics at least) can be safely kept inside the submarine pressure vessel and warmed by the isotope power system. This paper discusses the results of Phase I as well as the plans for Phase II.

  16. Exploring the submarine Graham Bank in the Sicily Channel

    Directory of Open Access Journals (Sweden)

    Mauro Coltelli

    2016-05-01

    Full Text Available In the Sicily Channel, volcanic activity has been concentrated mainly on the Pantelleria and Linosa islands, while minor submarine volcanism took place in the Adventure, Graham and Nameless banks. The volcanic activity spanned mostly during Plio-Pleistocene, however, historical submarine eruptions occurred in 1831 on the Graham Bank and in 1891 offshore Pantelleria Island. On the Graham Bank, 25 miles SW of Sciacca, the 1831 eruption formed the short-lived Ferdinandea Island that represents the only Italian volcano active in historical times currently almost completely unknown and not yet monitored. Moreover, most of the Sicily Channel seismicity is concentrated along a broad NS belt extending from the Graham Bank to Lampedusa Island. In 2012, the Istituto Nazionale di Geofisica e Vulcanologia (INGV carried out a multidisciplinary oceanographic cruise, named “Ferdinandea 2012”, the preliminary results of which represent the aim of this paper. The cruise goal was the mapping of the morpho-structural features of some submarine volcanic centres located in the northwestern side of the Sicily Channel and the temporary recording of their seismic and degassing activity. During the cruise, three OBS/Hs (ocean bottom seismometer with hydrophone were deployed near the Graham, Nerita and Terribile submarine banks. During the following 9 months they have recorded several seismo-acoustic signals produced by both tectonic and volcanic sources. A high-resolution bathymetric survey was achieved on the Graham Bank and on the surrounding submarine volcanic centres. A widespread and voluminous gas bubbles emission was observed by both multibeam sonar echoes and a ROV (remotely operated vehicle along the NW side of the Graham Bank, where gas and seafloor samples were also collected.

  17. Use of booster fans in underground coal mining to advantage

    Institute of Scientific and Technical Information of China (English)

    Habibi A; Gillies A D S

    2011-01-01

    A booster fan is an underground main fan which is installed in series with a main surface fan and used to boost the air pressure of the ventilation to overcome mine resistance.Currently booster fans are used in several major coal mining countries including the United Kingdom,Australia,Poland and China.In the United States booster fans are prohibited in coal mines although they are used in several metal and non-metal mines.A study has been undertaken to examine alternatives for ventilating an underground room and pillar coal mine system.A feasibility study of a hypothetical situation has shown that current ventilation facilities are incapable of fulfilling mine air requirements in the future due to increased seam methane levels.A current ventilation network model has been prepared and projected to a mine five years plan.“Ventsim visual” software simulations of different possible ventilation options have been conducted in which varying methane levels are found at working faces.The software can also undertake financial simulations and project present value total costs for the options under study.Several scenarios for improving the ventilation situation such as improving main surface fans,adding intake shafts,adding exhaust shafts and utilizing booster fans have been examined.After taking into account the total capital and operating costs for the five years mine plan the booster fan scenarios are recommended as being the best alternatives for further serious consideration by the mine.The optimum option is a properly sized and installed booster fan system that can be used to create safe work conditions,maintain adequate air quantity with lowest cost,generate a reduction in energy consumption and decrease mine system air leakage.

  18. Female fans of men's football - a case study in Denmark

    DEFF Research Database (Denmark)

    Pfister, Gertrud Ursula; Lenneis, Verena; Mintert, Svenja-Maria

    2013-01-01

    Football is an invention by men for men, and today, the majority of players and fans are men. There is an abundance of literature on football and fandom; however, gender is mostly not an issue in these publications. Research about female football supporters and fans is very limited. This is also...... to a ‘man’s world’ and what are their roles in this ‘male environment’? The statements of interviewees revealed that female fans have to cope with a measure of sexism, but that they can adopt the men’s perspectives in order to be accepted as ‘authentic fans’. Other women reacted on men’s domination...

  19. Performance Study and CFD Predictions of a Ducted Fan System

    Science.gov (United States)

    Abrego, Anita I.; Chang, I-Chung; Bulaga, Robert W.; Rutkowski, Michael (Technical Monitor)

    2002-01-01

    An experimental investigation was completed in the NASA Ames 7 by 10-Foot Wind Tunnel to study the performance characteristics of a ducted fan. The goal of this effort is to study the effect of ducted fan geometry and utilize Computational Fluid Dynamics (CFD) analysis to provide a baseline for correlation. A 38-inch diameter, 10-inch chord duct with a five-bladed fixed-pitch fan was tested. Duct performance data were obtained in hover, vertical climb, and forward flight test conditions. This paper will present a description of the test, duct performance results and correlation with CFD predictions.

  20. Introduction of a Cooling-Fan Efficiency Index

    DEFF Research Database (Denmark)

    Schiavon, S.; Melikov, Arsen Krikor

    2009-01-01

    , while cooling capacity and efficiency of energy use are unknown. To address this knowledge gap, this paper introduces the cooling-fan efficiency (CFE) index, defined as the ratio between the cooling effect (measured with a thermal manikin) generated by the device and its power consumption. The index...... cooling effect and an index for determining fan efficiency, such as the CFE index proposed in this study, need to be developed. The cooling fans generate a nonuniform velocity field around occupants, which cannot be described with a single air-velociry value. Therefore, it is not clear how to apply...

  1. COOLING FAN AND SYSTEM PERFORMANCE AND EFFICIENCY IMPROVEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Dupree

    2005-07-31

    Upcoming emissions regulations (Tiers 3, 4a and 4b) are imposing significantly higher heat loads on the cooling system than lesser regulated machines. This work was a suite of tasks aimed at reducing the parasitic losses of the cooling system, or improving the design process through six distinct tasks: 1. Develop an axial fan that will provide more airflow, with less input power and less noise. The initial plan was to use Genetic Algorithms to do an automated fan design, incorporating forward sweep for low noise. First and second generation concepts could not meet either performance or sound goals. An experienced turbomachinery designer, using a specialized CFD analysis program has taken over the design and has been able to demonstrate a 5% flow improvement (vs 10% goal) and 10% efficiency improvement (vs 10% goal) using blade twist only. 2. Fan shroud developments, using an 'aeroshroud' concept developed at Michigan State University. Performance testing at Michigan State University showed the design is capable of meeting the goal of a 10% increase in flow, but over a very narrow operating range of fan performance. The goal of 10% increase in fan efficiency was not met. Fan noise was reduced from 0 to 2dB, vs. a goal of 5dB at constant airflow. The narrow range of fan operating conditions affected by the aeroshroud makes this concept unattractive for further development at this time 3. Improved axial fan system modeling is needed to accommodate the numbers of cooling systems to be redesigned to meet lower emissions requirements. A CFD fan system modeling guide has been completed and transferred to design engineers. Current, uncontrolled modeling practices produce flow estimates in some cases within 5% of measured values, and in some cases within 25% of measured values. The techniques in the modeling guide reduced variability to the goal of + 5% for the case under study. 4. Demonstrate the performance and design versatility of a high performance fan. A

  2. Life, death and revival of debris-flow fans on Earth and Mars : fan dynamics and climatic inferences

    OpenAIRE

    Haas, T.

    2016-01-01

    Alluvial fans are ubiquitous landforms in high-relief regions on Earth and Mars. They have a semi-conical shape and are located at the transition between highlands and adjacent basins. Alluvial fans can form by a range of processes including debris flows, which are water-laden masses of soil and rock with volumetric sediment concentrations exceeding 40%. In this thesis, I aim to (1) unravel the formative dynamics of debris-flow fans and, building on these insights, to (2) reconstruct hydrolog...

  3. PLSS 2.5 Fan Design and Development

    Science.gov (United States)

    Quinn, Gregory; Carra, Michael; Converse, David; Chullen, Cinda

    2015-01-01

    NASA is building a high fidelity prototype of an advanced portable life support system (PLSS) as part of the Advanced Exploration Systems Program. This new PLSS, designated as PLSS 2.5, will advance component technologies and systems knowledge in order to inform a future flight program. The oxygen ventilation loop of its predecessor, PLSS 2.0, is driven by a centrifugal fan developed using specifications from the Constellation Program. PLSS technology and system parameters have matured to the point where the existing fan will not perform adequately for the new prototype. In addition, areas of potential improvement have been identified with the existing fan that could be addressed in a new design. As a result, a new fan was designed and tested for the PLSS 2.5.

  4. Autonomous Composite Fan Containment Integrity Monitoring (AUTOCONFIRM) System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — New engine fan blade containment structures are being manufactured with advanced composite structures such that they can withstand blade-out events. The use of...

  5. Redefining genderswap fan fiction: A Sherlock case study

    Directory of Open Access Journals (Sweden)

    Ann McClellan

    2014-09-01

    Full Text Available Using BBC Sherlock (2010– fan fiction as case study, this article looks at how fans use and understand such concepts as biological sex and gender in genderswap fan fiction, arguing that the label often minimizes the importance of the physical body in determining gender identity. The label genderswap, most often used to describe stories where characters have become differently sexed, reflects and reinforces common cultural misunderstandings about differences between sex and gender. By teasing out definitions of genderswap, sex, gender, cisgender, and transgender, the article analyzes what genderswap includes and excludes from discussions of gender and identity within contemporary fan fiction, ultimately arguing for a broader conceptual understanding that grounds the genre within contemporary transgender theory.

  6. Field testing the prototype BNL fan-atomized oil burner

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, R.; Celebi, Y. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    BNL has developed a new oil burner design referred to as the Fan Atomized burner System. The primary objective of the field study was to evaluate and demonstrate the reliable operation of the Fan Atomized Burner. The secondary objective was to establish and validate the ability of a low firing rate burner (0.3-0.4 gph) to fully satisfy the heating and domestic hot water load demands of an average household in a climate zone with over 5,000 heating-degree-days. The field activity was also used to evaluate the practicality of side-wall venting with the Fan Atomized Burner with a low stack temperature (300F) and illustrate the potential for very high efficiency with an integrated heating system approach based on the Fan Atomized Burner.

  7. Low Cost/Low Noise Variable Pitch Ducted Fan Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ACI proposes a design for a Propulsor (Low Cost/Low Noise Variable Pitch Ducted Fan) that has wide application in all sectors of Aviation. Propulsor hardware of this...

  8. Why do fans attend world Wrestling Entertainment? | Kruger | South ...

    African Journals Online (AJOL)

    South African Journal for Research in Sport, Physical Education and Recreation ... at a live Smackdown event in July 2011, which was part of the WWE's world tour. ... Therefore, marketing campaigns directed at these fans should be designed ...

  9. Gender constructions and negotiations of female football fans

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2015-01-01

    While both the media and the academic literature focus primarily on male fans, in particular on violence and the prevention of hooliganism, little is known about female football supporters. This is also true of Denmark, a country that is known for its high degree of gender equality. This article...... "hypermasculinity" nor "emphasised femininity" in their gender performances. Female fans do not only comply with and reproduce the rules of conduct in the stadium but also apply different forms of resistance against sexism and the domination of men in the stadium – both on the field and in the stands. The founding...... aims to give insight into gender constructions and negotiations of female football fans in the stands. Drawing on a social constructivist perspective to gender and Bourdieu's (1984) approaches to field, capital and habitus, we explored the experiences and opinions of female fans. The methods employed...

  10. Modeling and ecodesigning crossflow ventilation fans with Mathematica

    CERN Document Server

    Argentini, Gianluca

    2010-01-01

    The efficiency of a simple model of crossflow fan is maximized when the geometry depends on a design parameter. The flow field is numerically computed using a Galerkin method for solving a Poisson partial differential equation.

  11. Pathological effects of cyanobacteria on sea fans in southeast Florida.

    Science.gov (United States)

    Kiryu, Y; Landsberg, J H; Peters, E C; Tichenor, E; Burleson, C; Perry, N

    2015-07-01

    In early August 2008, observations by divers indicated that sea fans, particularly Gorgonia ventalina, Gorgonia flabellum, and Iciligorgia schrammi, were being covered by benthic filamentous cyanobacteria. From August 2008 through January 2009 and again in April 2009, tissue samples from a targeted G. ventalina colony affected by cyanobacteria and from a nearby, apparently healthy (without cyanobacteria) control colony, were collected monthly for histopathological examination. The primary cellular response of the sea fan to overgrowth by cyanobacteria was an increase in the number of acidophilic amoebocytes (with their granular contents dispersed) that were scattered throughout the coenenchyme tissue. Necrosis of scleroblasts and zooxanthellae and infiltration of degranulated amoebocytes were observed in the sea fan surface tissues at sites overgrown with cyanobacteria. Fungal hyphae in the axial skeleton were qualitatively more prominent in cyanobacteria-affected sea fans than in controls.

  12. Monitoring El Hierro submarine volcanic eruption events with a submarine seismic array

    Science.gov (United States)

    Jurado, Maria Jose; Molino, Erik; Lopez, Carmen

    2013-04-01

    A submarine volcanic eruption took place near the southernmost emerged land of the El Hierro Island (Canary Islands, Spain), from October 2011 to February 2012. The Instituto Geografico Nacional (IGN) seismic stations network evidenced seismic unrest since July 2012 and was a reference also to follow the evolution of the seismic activity associated with the volcanic eruption. From the beginning of the eruption a geophone string was installed less than 2 km away from the new volcano, next to La Restinga village shore, to record seismic activity related to the volcanic activity, continuously and with special interest on high frequency events. The seismic array was endowed with 8, high frequency, 3 component, 250 Hz, geophone cable string with a separation of 6 m between them. The analysis of the dataset using spectral techniques allows the characterization of the different phases of the eruption and the study of its dynamics. The correlation of the data analysis results with the observed sea surface activity (ash and lava emission and degassing) and also with the seismic activity recorded by the IGN field seismic monitoring system, allows the identification of different stages suggesting the existence of different signal sources during the volcanic eruption and also the posteruptive record of the degassing activity. The study shows that the high frequency capability of the geophone array allow the study of important features that cannot be registered by the standard seismic stations. The accumulative spectral amplitude show features related to eruptive changes.

  13. Noise Generation by Fans with Supersonic Tip Speeds

    Science.gov (United States)

    Glegg, Stewart; Envia, Edmane (Technical Monitor)

    2003-01-01

    Fan noise continues to be a significant issue for commercial aircraft engines and there still exists a requirement for improved understanding of the fundamental issues associated with fan noise source mechanisms. At the present time, most of the prediction methods identify the dominant acoustic sources to be associated with the stator vanes or blade trailing edges which are downstream of the fan face. However recent studies have shown that acoustic waves are significantly attenuated as they propagate upstream through a rotor, and if the appropriate corrections are applied, sound radiation from the engine inlet is significantly underpredicted. The prediction models can only be applied to fans with subsonic tip speeds. In contrast, most aircraft engines have fan tip speeds which are transonic and this implies an even higher attenuation for upstream propagating acoustic waves. Consequently understanding how sound propagates upstream through the fan is an important, and not well understood phenomena. The objective of this study is to provide improved insight into the upstream propagation effects through a rotor which are relevant to full scale engines. The focus of this study is on broadband fan noise generated by boundary layer turbulence interacting with the trailing edges of the fan blades. If this source mechanism is important upstream of the fan, the sound must propagate upstream through a transonic non uniform flow which includes large gradients and non linearities. Developing acoustic propagation models in this type of flow is challenging and currently limited to low frequency applications, where the frequency is of the same order as the blade passing frequency of the fan. For trailing edge noise, much higher frequencies are relevant and so a suitable approach needs to be developed, which is not limited by an unacceptably large computational effort. In this study we are in the process of developing a computational method which applies for the high frequencies of

  14. Should electric fans be used during a heat wave?

    Science.gov (United States)

    Jay, Ollie; Cramer, Matthew N; Ravanelli, Nicholas M; Hodder, Simon G

    2015-01-01

    Heat waves continue to claim lives, with the elderly and poor at greatest risk. A simple and cost-effective intervention is an electric fan, but public health agencies warn against their use despite no evidence refuting their efficacy in heat waves. A conceptual human heat balance model can be used to estimate the evaporative requirement for heat balance, the potential for evaporative heat loss from the skin, and the predicted sweat rate, with and without an electrical fan during heat wave conditions. Using criteria defined by the literature, it is clear that fans increase the predicted critical environmental limits for both the physiological compensation of endogenous/exogenous heat, and the onset of cardiovascular strain by an air temperature of ∼3-4 °C, irrespective of relative humidity (RH) for the young and elderly. Even above these critical limits, fans would apparently still provide marginal benefits at air temperatures as high as 51.1 °C at 10%RH for young adults and 48.1 °C at 10%RH for the elderly. Previous concerns that dehydration would be exacerbated with fan use do not seem likely, except under very hot (>40 °C) and dry (conditions, when predicted sweat losses are only greater with fans by a minor amount (∼20-30 mL/h). Relative to the peak outdoor environmental conditions reported during ten of the most severe heat waves in recent history, fan use would be advisable in all of these situations, even when reducing the predicted maximum sweat output for the elderly. The protective benefit of fans appears to be underestimated by current guidelines. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  15. On the Optimal Selection of Electrical Machines Fans

    Directory of Open Access Journals (Sweden)

    Mădălin Costin

    2014-09-01

    Full Text Available In this paper an analytic relationship for electrical machine fan design has been developed. In the particularly case of salient poles synchronous machine (with salient poles – for electromagnetic field excitation or surface mounded permanent magnet, this approach allowed to express the fan power as a function of machine middle axe air gap. This analytic foundation developed may leads to different optimization criteria as specific active materials or costs. Numerical simulations confirm our approach.

  16. Sport Fan Motivation: Are You Going To The Game?

    OpenAIRE

    Johannes A. Wiid; Cant, Michael C.

    2015-01-01

    Every individual or group consume sporting events for different reasons and are therefore motivated in different ways. People consuming sport events can be referred to as sport fans, someone who is enthusiastic about a particular sport, an athlete or someone who is motivated to make the effort to attend a live sporting event. Research on sport consumption motivation had led to the development of the Sport Fan Motivation Scale (SFMS), which consists of eight motives namely, eustress, self-este...

  17. Simulation of fan topography and soil profile using a coupled soilscape-landscape evolution model

    Science.gov (United States)

    Welivitiya, Dimuth; Willgoose, Garry; Hancock, Greg

    2017-04-01

    In this study the evolution of a fluvial fan, its topography and soil profile grading under erosion and deposition and soil profile weathering was simulated using SSPAM coupled soil-landscape evolution model. A constant rainfall was simulated on a synthetic landform and a fluvial fan depositional structure was allowed to form at the latter part of the landform. At each time step the geomorphological and particle size distribution information of the fan was recorded. Using this recorded information, the evolutionary characteristics of the fan as well as the surface and subsurface sediment characteristics was examined and compared with experimental and field observation data. Different fan profile sections were also derived from the recorded data and analysed. The simulation produced a fluvial fan semicircular in shape, with concave up long profiles and convex up cross profiles. The surface sediment sizes of the simulated fan were coarsest near the fan apex and fines toward the fan toe with coarse grained sediment filaments extending radially from the fan apex. These geomorphological features and surface sediment distribution agrees well with field observations of natural fans. The results of the simulation also show that the fan develops as a result of the channel bringing sediments in to the fan and periodically changing its path due to steepening of channel gradient by sediment deposition. The position of the channel is fixed at the fan apex and the channel path constantly changes along any radial direction form the fan apex. This process is remarkably similar to the process of "Fan head trenching" described in literature which is the dominant process in fluvial fan development in the field. Finally, the analysis of fan cross-sections revealed complex sediment layering patterns in the fan profile. The simulation results of the SSSPAM coupled soilscape-landscape evolution model provide qualitatively correct geomorphological and sedimentary characterization of the

  18. Experimental and Numerical Investigation of a 60cm Diameter Bladeless Fan

    OpenAIRE

    mohammad jafari; Hossein Afshin; Bijan Farhanieh; Hamidreza bozorgasareh

    2016-01-01

    Bladeless fan is a novel type of fan with an unusual geometry and unique characteristics. This type of fan has been recently developed for domestic applications in sizes typically up to 30cm diameter. In the present study, a Bladeless fan with a diameter of 60cm was designed and constructed, in order to investigate feasibility of its usage in various industries with large dimensions. Firstly, flow field passed through this fan was studied by 3D modeling. Aerodynamic and aeroacoust...

  19. Damage-Tolerant Fan Casings for Jet Engines

    Science.gov (United States)

    2006-01-01

    All turbofan engines work on the same principle. A large fan at the front of the engine draws air in. A portion of the air enters the compressor, but a greater portion passes on the outside of the engine this is called bypass air. The air that enters the compressor then passes through several stages of rotating fan blades that compress the air more, and then it passes into the combustor. In the combustor, fuel is injected into the airstream, and the fuel-air mixture is ignited. The hot gasses produced expand rapidly to the rear, and the engine reacts by moving forward. If there is a flaw in the system, such as an unexpected obstruction, the fan blade can break, spin off, and harm other engine components. Fan casings, therefore, need to be strong enough to contain errant blades and damage-tolerant to withstand the punishment of a loose blade-turned-projectile. NASA has spearheaded research into improving jet engine fan casings, ultimately discovering a cost-effective approach to manufacturing damage-tolerant fan cases that also boast significant weight reduction. In an aircraft, weight reduction translates directly into fuel burn savings, increased payload, and greater aircraft range. This technology increases safety and structural integrity; is an attractive, viable option for engine manufacturers, because of the low-cost manufacturing; and it is a practical alternative for customers, as it has the added cost saving benefits of the weight reduction.

  20. Potential Global Benefits of Improved Ceiling Fan Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Sathaye, Nakul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-10-31

    Ceiling fans contribute significantly to residential electricity consumption, both in an absolute sense and as a proportion of household consumption in many locations, especially in developing countries in warm climates. However, there has been little detailed assessment of the costs and benefits of efficiency improvement options for ceiling fans and the potential resulting electricity consumption and greenhouse gas (GHG) emissions reductions. We analyze the costs and benefits of several options to improve the efficiency of ceiling fans and assess the global potential for electricity savings and GHG emission reductions with more detailed assessments for India, China, and the U.S. We find that ceiling fan efficiency can be cost-effectively improved by at least 50% using commercially available technology. If these efficiency improvements are implemented in all ceiling fans sold by 2020, 70 terrawatt hours per year (TWh/year) could be saved and 25 million metric tons of carbon dioxide (CO2) emissions per year could be avoided, globally. We assess how policies and programs such as standards, labels, and financial incentives can be used to accelerate the adoption of efficient ceiling fans in order to realize this savings potential.

  1. COOLING FAN AND SYSTEM PERFORMANCE AND EFFICIENCY IMPROVEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Dupree

    2005-07-31

    Upcoming emissions regulations (Tiers 3, 4a and 4b) are imposing significantly higher heat loads on the cooling system than lesser regulated machines. This work was a suite of tasks aimed at reducing the parasitic losses of the cooling system, or improving the design process through six distinct tasks: 1. Develop an axial fan that will provide more airflow, with less input power and less noise. The initial plan was to use Genetic Algorithms to do an automated fan design, incorporating forward sweep for low noise. First and second generation concepts could not meet either performance or sound goals. An experienced turbomachinery designer, using a specialized CFD analysis program has taken over the design and has been able to demonstrate a 5% flow improvement (vs 10% goal) and 10% efficiency improvement (vs 10% goal) using blade twist only. 2. Fan shroud developments, using an 'aeroshroud' concept developed at Michigan State University. Performance testing at Michigan State University showed the design is capable of meeting the goal of a 10% increase in flow, but over a very narrow operating range of fan performance. The goal of 10% increase in fan efficiency was not met. Fan noise was reduced from 0 to 2dB, vs. a goal of 5dB at constant airflow. The narrow range of fan operating conditions affected by the aeroshroud makes this concept unattractive for further development at this time 3. Improved axial fan system modeling is needed to accommodate the numbers of cooling systems to be redesigned to meet lower emissions requirements. A CFD fan system modeling guide has been completed and transferred to design engineers. Current, uncontrolled modeling practices produce flow estimates in some cases within 5% of measured values, and in some cases within 25% of measured values. The techniques in the modeling guide reduced variability to the goal of + 5% for the case under study. 4. Demonstrate the performance and design versatility of a high performance fan. A

  2. Broadband Liner Optimization for the Source Diagnostic Test Fan

    Science.gov (United States)

    Nark, Douglas M.; Jones, Michael G.

    2012-01-01

    The broadband component of fan noise has grown in relevance with the utilization of increased bypass ratio and advanced fan designs. Thus, while the attenuation of fan tones remains paramount, the ability to simultaneously reduce broadband fan noise levels has become more appealing. This paper describes a broadband acoustic liner optimization study for the scale model Source Diagnostic Test fan. Specifically, in-duct attenuation predictions with a statistical fan source model are used to obtain optimum impedance spectra over a number of flow conditions for three liner locations in the bypass duct. The predicted optimum impedance information is then used with acoustic liner modeling tools to design liners aimed at producing impedance spectra that most closely match the predicted optimum values. Design selection is based on an acceptance criterion that provides the ability to apply increased weighting to specific frequencies and/or operating conditions. Typical tonal liner designs targeting single frequencies at one operating condition are first produced to provide baseline performance information. These are followed by multiple broadband design approaches culminating in a broadband liner targeting the full range of frequencies and operating conditions. The broadband liner is found to satisfy the optimum impedance objectives much better than the tonal liner designs. In addition, the broadband liner is found to provide better attenuation than the tonal designs over the full range of frequencies and operating conditions considered. Thus, the current study successfully establishes a process for the initial design and evaluation of novel broadband liner concepts for complex engine configurations.

  3. THz Beam Shaper Realizing Fan-Out Patterns

    Science.gov (United States)

    Liebert, K.; Rachon, M.; Siemion, A.; Suszek, J.; But, D.; Knap, W.; Sypek, M.

    2017-08-01

    Fan-out elements create an array of beams radiating at particular angles along the propagation axis. Therefore, they are able to form a matrix of equidistant spots in the far-field diffraction region. In this work, we report on the first fan-out structures designed for the THz range of radiation. Two types of light-dividing fan-out structures are demonstrated: (i) the 3×1 matrix fan-out structure based on the optimized binary phase grating and (ii) the 3×3 fan-out structure designed on the basis of the well-known Dammann grating. The structures were generated numerically and manufactured using the 3D printing technique with polyamide PA12. To obtain equal powers and symmetry of diffracted beams, the computer-aided optimization algorithm was used. Diffractive optical elements designed for 140 and 282 GHz were evaluated experimentally at both these frequencies using illumination with the wavefront coming from the point-like source. Described fan-out elements formed uniform intensity and equidistant energy distribution in agreement with the numerical simulations.

  4. "The florals": Female fans over 50 in the Sherlock fandom

    Directory of Open Access Journals (Sweden)

    Line Nybro Petersen

    2017-03-01

    Full Text Available This article uses e-mail interviews with nine female fans to explore what it means to be a fan over the age of 50 of the popular BBC drama Sherlock (2010–. The research aims to better understand the role of fandom in later life, in particular how the participants in this study negotiate their perceptions of their subjective age in relation to being a fan in this part of their life course. This study combines theory on cultural gerontology with fan studies and mediatization theory in order to understand the dynamics and processes that guide fans' negotiations of subjective age as well as the role of fan practices and the affordances of social media in these processes. I argue that fandom, as a manifestation of a mediatized culture, augments the relevance of subjective age and informs the way in which participants in middle and later life perceive and negotiate their own subjective age specifically in relation to fandom as youth culture, women's passion, and creativity.

  5. [Medical-physiological characteristics of combat training of nuclear-power submarine crews].

    Science.gov (United States)

    Dovgusha, V V; Myznikov, I L; Shalabodov, S A; Bumaĭ, O K

    2009-10-01

    The article presents an observe of general questions of peculiarities of military-professional activity of submarine staff These questions are defining value in ideology of medical supply of submarine troops of NAVY in now-days conditions. The article also presents the statistics of morbidity in long termed sails for last forty years, it's dynamics by different categories of sail staff, on different stages of combat training activity in dependence of perioditation of work cycle of submarine staff The authors have examined modern condition of medical supply of submarines; have presented statistics of quality indexes of health of submarine staff The authors have formed main problems of medical supply of submarines and have proposed ways of their solving on modern stage.

  6. The clinical implications of a smoking ban on submarines in the U.S. Navy.

    Science.gov (United States)

    Shah, Anil N; Arnold, Michael J

    2011-02-01

    By the end of calendar year 2010, a total smoking ban on submarines is expected to be implemented throughout the submarine force because of the negative health effects of environmental tobacco smoke and the recently demonstrated exposure of nonsmoking submariners to measurable levels of nicotine during submarine deployments. Historically, smoking has been highly prevalent in the military, but new data on the negative health effects of tobacco have led the military to change its policies, restricting its use in certain environments. A number of research studies have examined the effect of smoking on the military, cessation and prevention interventions, effect of environmental tobacco smoke onboard the submarine, and treatment modalities aimed at smokers attempting to quit. With the potential for considerable physical and psychological effects, a mass tobacco cessation program is being implemented to support the prohibition onboard the submarine. Recommendations for a successful implementation program are included.

  7. Numerical simulation and experimental study of the submarine's cold wake temperature character

    Science.gov (United States)

    Chen, Shengtao; Zhong, Jingjun; Sun, Peng

    2014-06-01

    The temperature difference of the submarine's wake on the sea surface is the base for the IR detection. In this paper, the temperature difference on the sea surface caused by the submarine's propellers and the submarine's hull is studied by solving the three dimensional N-S equations. The results show that under the condition of sea temperature surroundings of minus gradient, such as in summer the upper water's temperature is higher than the lower water, it is cold wake on the sea surface and hot wake on the submarine's plane. The temperature difference between the wake and the water around in the wake's initial part becomes more and more obvious as the wake's distance gets longer. Through the IR camera, the submarine's propeller wake is studied under the same temperature status. Obvious IR temperature difference signals can be observed and it is consistent with the numerical simulation for the submarine.

  8. Fan Ky不等式的一个改进%A Refinement of Fan Ky's Inequality

    Institute of Scientific and Technical Information of China (English)

    周昱; 高明哲

    2007-01-01

    利用改进的H(o)lder不等式并借助于正交矩阵的行列式的积分表示法建立了Fan Ky不等式的一个有意义的改进.当A,B为n阶非奇异矩阵时,给出了新创建不等式的一个推广.特别当n=1时,得到了Young不等式的一个很强的结果.

  9. Dynamic Bowtie for Fan-beam CT

    CERN Document Server

    Liu, Fenglin; Cong, Wenxiang; Hsieh, Scott; Pelc, Norbert

    2013-01-01

    A bowtie is a filter used to shape an x-ray beam and equalize its flux reaching different detector channels. For development of spectral CT with energy-discriminative photon-counting (EDPC) detectors, here we propose and evaluate a dynamic bowtie for performance optimization based on a patient model or a scout scan. Our dynamic bowtie modifies an x-ray beam intensity profile by mechanical rotation and adaptive adjustment of the x-ray source flux. First, a mathematical model for dynamic bowtie filtering is established for an elliptical section in fan-beam geometry, and the contour of the optimal bowtie is derived. Then, numerical simulation is performed to compare the performance of the dynamic bowtie in the cases of an ideal phantom and a realistic cross-section relative to the counterparts without any bowtie and with a fixed bowtie respectively. Our dynamic bowtie can equalize the expected numbers of photons in the case of an ideal phantom. In practical cases, our dynamic bowtie can effectively reduce the dy...

  10. Characterisation of fan-beam collimators.

    Science.gov (United States)

    Pareto, D; Pavía, J; Falcón, C; Juvells, I; Cot, A; Ros, D

    2001-02-01

    Fan-beam collimators offer a good balance between resolution and noise. The collimator response may be included in iterative reconstruction algorithms in order to improve single-photon emission tomography (SPET) resolution. To this end, accurate determination of the focal region and characterisation of the collimator response as a function of the source co-ordinates must be performed. In this paper, a method to characterise fanbeam collimators is evaluated. First, we calculated the real focal region and the accuracy of the collimator convergence. Then, we confirmed the hypothesis that Gaussian distributions adequately fit the collimator responses, although no individualised treatment was performed for the tails of detector response which are associated with scattering and septal penetration. Finally, analytical functions were used to model the resolution and sensitivity. The parameter values in these functions were obtained from experimental measures by non-linear regression fitting. Our findings show differences of 1.43% between nominal and real focal length and standard deviations of 2.5 mm in the x-direction and 7.1 mm in the y-direction for the focal convergence. The correlation coefficients between experimental and predicted values were 0.994 for resolution and 0.991 for sensitivity. As a consequence, the proposed method can be used to characterise the collimator response.

  11. Review: Bettina Fritzsche (2003. Pop-Fans. Studie einer Mädchenkultur [Pop-Fans: Study of a Girl Culture

    Directory of Open Access Journals (Sweden)

    Lothar Mikos

    2006-05-01

    Full Text Available This study focuses on the "girl culture" created by fans of boy groups and girl groups. The central case study is used to examine fan practices as cultural practices using reconstructive and documentary methodologies, and to assess the normative demands placed on young people. The study centers on the question of gender socialization by mediated symbolic resources, and shows that fan culture is a self-determined space in which girls can negotiate normative demands and engage with questions of gender, sexuality and the body, testing conformity and obstinacy. Fan activities are presented as part of the self-empowerment of girls. The study makes an important contribution to the research of a specific girl culture. It shows in a brilliant way how media representations are used as symbolic material in everyday cultural practices. URN: urn:nbn:de:0114-fqs0603187

  12. Morphodynamics of submarine channel inception revealed by new experimental approach

    Science.gov (United States)

    de Leeuw, Jan; Eggenhuisen, Joris T.; Cartigny, Matthieu J. B.

    2016-03-01

    Submarine channels are ubiquitous on the seafloor and their inception and evolution is a result of dynamic interaction between turbidity currents and the evolving seafloor. However, the morphodynamic links between channel inception and flow dynamics have not yet been monitored in experiments and only in one instance on the modern seafloor. Previous experimental flows did not show channel inception, because flow conditions were not appropriately scaled to sustain suspended sediment transport. Here we introduce and apply new scaling constraints for similarity between natural and experimental turbidity currents. The scaled currents initiate a leveed channel from an initially featureless slope. Channelization commences with deposition of levees in some slope segments and erosion of a conduit in other segments. Channel relief and flow confinement increase progressively during subsequent flows. This morphodynamic evolution determines the architecture of submarine channel deposits in the stratigraphic record and efficiency of sediment bypass to the basin floor.

  13. Submarine Cables for Ocean/Climate Monitoring and Disaster Warning

    Science.gov (United States)

    Bueti, Cristina; Barnes, Chris; Meldrum, David

    2013-04-01

    A joint initiative between International Telecommunication Union (ITU), the World Meteorological Organization (WMO) and the Intergovernmental Oceanographic Commission (IOC) of UNESCO is examining novel uses for submarine telecommunication cables. The initiative addresses two main issues: the need for sustained climate-quality data from the sparsely observed deep oceans, and the desire to increase the reliability and integrity of the global tsunami warning networks. In the latter case, a significant proportion of the network suffers from failure and vandalism of the sea-surface telemetry buoys that relay the tsunami signals from the sea-bed sensor package: incorporating the sensors within a submarine cable repeater is an obvious way of increasing system reliability. At the present time, plans are well advanced to launch a pilot project with the active involvement of cable industry players.

  14. Optimization of Submarine Hydrodynamic Coefficients Based on Immune Genetic Algorithm

    Institute of Scientific and Technical Information of China (English)

    HU Kun; XU Yi-fan

    2010-01-01

    Aiming at the demand for optimization of hydrodynamic coefficients in submarine's motion equations, an adaptive weight immune genetic algorithm was proposed to optimize hydrodynamic coefficients in motion equations. Some hydrody-namic coefficients of high sensitivity to control and maneuver were chosen as the optimization objects in the algorithm. By using adaptive weight method to determine the weight and target function, the multi-objective optimization could be transla-ted into single-objective optimization. For a certain kind of submarine, three typical maneuvers were chosen to be the objects of study: overshoot maneuver in horizontal plane, overshoot maneuver in vertical plane and turning circle maneuver in horizontal plane. From the results of computer simulations using primal hydrodynamic coefficient and optimized hydrody-namic coefficient, the efficiency of proposed method is proved.

  15. Armor corrosion monitoring of a submarine AC cable

    Energy Technology Data Exchange (ETDEWEB)

    Genesca, J. [Univ. Nacional Autonoma de Mexico (Mexico). Dept. Ingenieria Metalurgica; Perez, T. [Univ. Autonoma de Campeche (Mexico). Programa Corrosion del Golfo de Mexico; Lara, C. [CFE-LAPEM, Irapuato (Mexico)

    1997-12-01

    After the hurricane Gilberto flattened (devastated) Cancun in September 1988, the submarine cables which supplied electricity to Isla Mjueres Island remained very damaged, and it was decided to install the new ones. In 1989, four new submarine cables were installed from Punta Sam, Cancun to Isla Mujeres. Such cables, of nominal tension 34.5 KV, were manufactures with a galvanized steel armor coated with asphalt, and began operation during 1990. The object of this communication is to present the experimental procedure that gave place to the armor corrosion monitoring procedure carried out in this particular case and to compare the results with those obtained on the field. Results of the cathodic protection system applied are also presented.

  16. The importance of shallow confining units to submarine groundwater flow

    Science.gov (United States)

    Bratton, J.F.

    2007-01-01

    In addition to variable density flow, the lateral and vertical heterogeneity of submarine sediments creates important controls on coastal aquifer systems. Submarine confining units produce semi-confined offshore aquifers that are recharged on shore. These low-permeability deposits are usually either late Pleistocene to Holocene in age, or date to the period of the last interglacial highstand. Extensive confining units consisting of peat form in tropical mangrove swamps, and in salt marshes and freshwater marshes and swamps at mid-latitudes. At higher latitudes, fine-grained glaciomarine sediments are widespread. The net effect of these shallow confining units is that groundwater from land often flows farther offshore before discharging than would normally be expected. In many settings, the presence of such confining units is critical to determining how and where pollutants from land will be discharged into coastal waters. Alternatively, these confining units may also protect fresh groundwater supplies from saltwater intrusion into coastal wells.

  17. Stresses in a submarine topography under ocean waves

    Energy Technology Data Exchange (ETDEWEB)

    Mei, C.C.; McTigue, D.F.

    1984-09-01

    The problem of submarine slope stability is of interest to both offshore engineering and geology. In an uneven topography, the weight above a horizontal plane induces two-dimensional variation in the static stress field. The action of wave pressure, which changes with depth, further introduces excess pore pressure and dynamic stresses in the sea bottom. In the present paper, we combine a simple analytical theory for the static stress by the present authors, and the recent solution by Mei and Foda for wave-induced stresses in a plane poro-elastic sea bed to account for mild bottom slope and wave shoaling, and obtain the effective stress field in a submarine topography under sea waves. Sample results are given for a ridge and a canyon. In particular, the dynamic pore pressure and the combined static and dynamic effective stresses are presented.

  18. Stresses in a submarine topography under ocean waves

    Energy Technology Data Exchange (ETDEWEB)

    Mei, C.C.; McTigue, D.F.

    1984-01-01

    The problem of submarine slope stability is of interest to both offshore engineering and geology. In an uneven topography, the weight above a horizontal plane induces two-dimensional variation in the static stress field. The action of wave pressure, which changes with depth, further introduces excess pore pressure and dynamic stresses in the sea bottom. In the present paper, we combine a simple analytical theory for the static stress by the present authors, and the recent solution by Mei and Foda for wave-induced stresses in a plane poro-elastic sea bed to account for mild bottom slope and wave shoaling, to obtain the effective stress field in a submarine topography under sea waves. Sample results are given for a ridge and a canyon. In particular the dynamic pore pressure and the combined static and dynamic effective stresses are presented. 10 references, 11 figures.

  19. ANALYTIC INVESTIGATIONS OF CARBON FIBER REINFORCED POLYMER STIFFENED CYLINDRICAL SUBMARINE HULL

    OpenAIRE

    2013-01-01

    A submarine is any naval vessel that is capable of propelling itself beneath the water as well as on the water surface. Submersibles are capable of operating for extended period of time underwater and are subjected to heavy hydrostatic pressure. The conventional submarines made up of high strength steel and concrete prevents them from going to greater depth owing to its large dead weight. In the present work, the pressure hull of submarine is considered both in isotropic and composite materia...

  20. Submarine and Autonomous Vessel Proliferation: Implications for Future Strategic Stability at Sea

    Science.gov (United States)

    2012-12-01

    replace the Ohio- class SSBN and Virginia -class SSN to replace the Los Angeles class attack submarine. Although more sophisticated than their...predecessors and with some modifications to demands of the post-Cold War era and (in the Virginia class) an emphasis on littoral conflict, these purchases...Congressional Research Service analyst Amy Woolf observes: “With few submarines in the fleet, the Navy would have to reduce the number of submarines on

  1. The Study on Fatigue Experiment and Reliability Life of Submarine Pipeline Steel

    OpenAIRE

    Yan Yifei; Shao Bing; Liu Jinkun; Cheng Lufeng

    2013-01-01

    The aim of the fatigue experiment study is to solve the fatigue fracture problem of X70 submarine tubing when it is under the scouring effect of offshore current. The multilevel fatigue experiments are carried out following the internation (GB4337-84) recommended method. The standard round bar fatigue specimen was made by the material of submarine pipeline steel. The fatigue life of submarine pipeline steel in different survival probability and P-S-N curve were achieved. According to reliabil...

  2. Evaluation and comparison of electric propulsion motors for submarines

    OpenAIRE

    Harbour, Joel P.

    2001-01-01

    CIVINS The Navy has announced its conviction to make its warships run on electric power through the decision to make its newest line of destroyers propelled with an electric propulsion system. Several ship construction firms and electric motor manufacturers are thus striving to develop enabling technology, including high power density motors. The purpose of this thesis is to evaluate some of the proposed motor designs for use in a submarine. Permanent magnet, superconducting synchronous an...

  3. The Polar Submarine and Navigation of the Arctic Ocean

    Science.gov (United States)

    1959-05-21

    bottomaide Training troubles Echo sounder for depth SESE 3180 Fwd. torp. rm. Bow-topside Transducer fuied below ice 111-3 Sonic listening JT Fwd...the training siaft keyway of the topside QLA sound head and made it inoperative. Equipments installed on the CARP are listed in Table V and are s;iown...submarine post and between submerged ice stalactites that extend to its depth. The choice of safe cruising depth is determined from oceanographic data of

  4. The evolution of composite materials in submarine structures.

    OpenAIRE

    Lemiere, Y

    1992-01-01

    Since the sixties, the amount of composite structures on submarines has increased continuously. The main reasons are their low apparent weight in water, good behaviour in a marine environment, excellent mechanical properties and acoustic transparency. The new applications required the use of prepreg. Relevant processes had to be adapted to the large dimensions and thickness of the structures. Future applications will be concerned with both structures and internal equipment. A lively debate is...

  5. Scaling for Shock Response of Equipment in Different Submarines

    OpenAIRE

    O’Hara, G.J.; Cunniff, P.F.

    1993-01-01

    This article presents scaling rules developed to predict the response of submarine equipment subjected to underwater chemical explosions. The computer was used as a surrogate for shock tests. A simplified model of a hull section was used to contain frame-mounted single degree of freedom equipment. A general scaling rule has been developed to handle the spread in the shock response attributable to the charge weight, equipment weight, and equipment frequency, where the shock response is the abs...

  6. Late Quaternary development of the Storfjorden and Kveithola Trough Mouth Fans, northwestern Barents Sea

    Science.gov (United States)

    Llopart, Jaume; Urgeles, Roger; Camerlenghi, Angelo; Lucchi, Renata; Rebesco, Michele

    2016-04-01

    The development of two Arctic Trough Mouth Fans (TMFs), the Storfjorden and Kveithola TMFs, is investigated by means of sub-bottom and seismic reflection profiles, multibeam bathymetry and sediment samples allowing their detailed stratigraphic architecture to be defined. We find that the TMFs mainly consist of an alternation of rapidly deposited glacigenic debris flows during glacial maxima and a sequence of well-layered plumites and hemipelagic sediments, which were mainly deposited during the deglaciation phase of the adjacent glacial trough. We have identified eight units above regional reflector R1, which indicate that the ice sheet reached the shelf edge within the Storfjorden Trough on at least three occasions during the last ~200 ka. A shallow subsurface unit of glacigenic debris flows suggests that the ice sheet had a short re-advance over the northern and central part of Storfjorden after the Last Glacial Maximum. From stratigraphy, core and literature data, we estimate that ice sheets reached the shelf edge between 19.5 to 22.5 ka, 61 to 65 ka and 135 to 167 ka. Detailed seismic imaging allows us to refine the sedimentary model of Arctic TMFs. The main differences to previous models involve gully formation during not only the deglaciation phase, but also during interglacials by dense shelf water cascading, and a specific timing for the occurrence of slope failures (i.e., shortly after the deglaciation phase). High mean sedimentation rates during glacial maxima of up to 18 kg m-2 yr-1 likely allow excess pore pressure to develop in the water rich plumites and hemipelagic sediments deposited in the previous deglacial period, particularly where such plumites attain a significant thickness. The position of the submarine landslides in the stratigraphic record suggest that such excess pore pressure is not enough to trigger the slope failures and suggests that earthquakes related to isostatic rebound are likely involved in the final activation.

  7. Fuel-cell-propelled submarine-tanker-system study

    Energy Technology Data Exchange (ETDEWEB)

    Court, K E; Kumm, W H; O' Callaghan, J E

    1982-06-01

    This report provides a systems analysis of a commercial Arctic Ocean submarine tanker system to carry fossil energy to markets. The submarine is to be propelled by a modular Phosphoric Acid Fuel Cell system. The power level is 20 Megawatts. The DOE developed electric utility type fuel cell will be fueled with methanol. Oxidant will be provided from a liquid oxygen tank carried onboard. The twin screw submarine tanker design is sized at 165,000 deadweight tons and the study includes costs and an economic analysis of the transport system of 6 ships. The route will be under the polar icecap from a loading terminal located off Prudhoe Bay, Alaska to a transshipment facility postulated to be in a Norwegian fjord. The system throughput of the gas-fed methanol cargo will be 450,000 barrels per day. The total delivered cost of the methanol including well head purchase price of natural gas, methanol production, and shipping would be $25/bbl from Alaska to the US East Coast. Of this, the shipping cost is $6.80/bbl. All costs in 1981 dollars.

  8. Estimating the empirical probability of submarine landslide occurrence

    Science.gov (United States)

    Geist, Eric L.; Parsons, Thomas E.; Mosher, David C.; Shipp, Craig; Moscardelli, Lorena; Chaytor, Jason D.; Baxter, Christopher D. P.; Lee, Homa J.; Urgeles, Roger

    2010-01-01

    The empirical probability for the occurrence of submarine landslides at a given location can be estimated from age dates of past landslides. In this study, tools developed to estimate earthquake probability from paleoseismic horizons are adapted to estimate submarine landslide probability. In both types of estimates, one has to account for the uncertainty associated with age-dating individual events as well as the open time intervals before and after the observed sequence of landslides. For observed sequences of submarine landslides, we typically only have the age date of the youngest event and possibly of a seismic horizon that lies below the oldest event in a landslide sequence. We use an empirical Bayes analysis based on the Poisson-Gamma conjugate prior model specifically applied to the landslide probability problem. This model assumes that landslide events as imaged in geophysical data are independent and occur in time according to a Poisson distribution characterized by a rate parameter λ. With this method, we are able to estimate the most likely value of λ and, importantly, the range of uncertainty in this estimate. Examples considered include landslide sequences observed in the Santa Barbara Channel, California, and in Port Valdez, Alaska. We confirm that given the uncertainties of age dating that landslide complexes can be treated as single events by performing statistical test of age dates representing the main failure episode of the Holocene Storegga landslide complex.

  9. Long-term eruptive activity at a submarine arc volcano.

    Science.gov (United States)

    Embley, Robert W; Chadwick, William W; Baker, Edward T; Butterfield, David A; Resing, Joseph A; de Ronde, Cornel E J; Tunnicliffe, Verena; Lupton, John E; Juniper, S Kim; Rubin, Kenneth H; Stern, Robert J; Lebon, Geoffrey T; Nakamura, Ko-ichi; Merle, Susan G; Hein, James R; Wiens, Douglas A; Tamura, Yoshihiko

    2006-05-25

    Three-quarters of the Earth's volcanic activity is submarine, located mostly along the mid-ocean ridges, with the remainder along intraoceanic arcs and hotspots at depths varying from greater than 4,000 m to near the sea surface. Most observations and sampling of submarine eruptions have been indirect, made from surface vessels or made after the fact. We describe here direct observations and sampling of an eruption at a submarine arc volcano named NW Rota-1, located 60 km northwest of the island of Rota (Commonwealth of the Northern Mariana Islands). We observed a pulsating plume permeated with droplets of molten sulphur disgorging volcanic ash and lapilli from a 15-m diameter pit in March 2004 and again in October 2005 near the summit of the volcano at a water depth of 555 m (depth in 2004). A turbid layer found on the flanks of the volcano (in 2004) at depths from 700 m to more than 1,400 m was probably formed by mass-wasting events related to the eruption. Long-term eruptive activity has produced an unusual chemical environment and a very unstable benthic habitat exploited by only a few mobile decapod species. Such conditions are perhaps distinctive of active arc and hotspot volcanoes.

  10. Structural and acoustic response of a finite stiffened submarine hull

    Science.gov (United States)

    Wang, Xian-zhong; Jiang, Chen-ban; Xu, Rui-yang

    2016-12-01

    After borrowing the idea of precise integration method, a precise integration transfer matrix method (PITMM) is proposed by modifying traditional transfer matrix method. The submarine hull can be modeled as joined conicalcylindrical-spherical shells. By considering the effect of the ring-stiffeners, the field transfer matrixes of shells of revolution are obtained accurately by PITMM. After assembling the field transfer matrixes into an entire matrix, the dynamic model is established to solve the dynamic responses of the joined shell. By describing the sound pressure in fluid by modified wave superposition method (MWSM) and collocating points along the meridian line of the joined shell, finally the structural and acoustic responses of a finite stiffened submarine hull can be predicted by coupled PITMM and MWSM. The effectiveness of the present method has been verified by comparing the structural and acoustic responses of the spherical shell with existing results. Furthermore, the effects of the model truncation, stiffness and thickness on the structural and acoustic responses of the submarine hull are studied.

  11. Submarine navigation based on gravity gradient-terrain matching

    Science.gov (United States)

    Xiong, Ling; Ma, Jie; Zhang, Li; Tian, Jin-Wen; Liu, Jian

    2007-11-01

    Based on the geophysics technology, a gravity gradient-terrain matching submarine navigation approach is proposed in this paper. The submarine's current position obtained by matching the measured gravity gradient data to the prepared gravity gradient reference map is used to correct the inertial navigation system's accumulated error. Although the precision gradiometer is in use, there is no world-wide gravity gradient map. The ocean's gravity gradient data is even scarce. Therefore, a gravity gradient matching navigation system directly utilizing the gravity gradient reference map can't be realized. With the sensitivity of gravity gradient to terrain, the gravity gradient reference map can be computed from the local terrain elevation data and the preparing approach of the gravity gradient map is proposed in detail in the paper. Since the seabed terrain elevation map, especially highly accurate offing terrain elevation map has been pre-surveyed, the location can be actualized through matching the real-time measured gravity gradient data to the prepared gravity gradient reference map. Simulations show that the submarine navigation approach on gravity gradient-terrain matching is feasible and can be put into practice.

  12. Source term analysis for a nuclear submarine accident

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, B.J.; Hugron, J.J.M.R. [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, Ontario (Canada)

    1999-07-01

    A source term analysis has been conducted to determine the activity release into the environment as a result of a large-break loss-of-coolant accident aboard a visiting nuclear-powered submarine to a Canadian port. This best-estimate analysis considers the fractional release from the core, and fission product transport in the primary heat transport system, primary containment (i.e. reactor compartment) and submarine hull. Physical removal mechanisms such as vapour and aerosol deposition are treated in the calculation. Since a thermalhydraulic analysis indicated that the integrity of the reactor compartment is maintained, release from the reactor compartment will only occur by leakage; however, it is conservatively assumed that the secondary containment is not isolated for a 24-h period where release occurs through an open hatch in the submarine hull. Consequently, during this period, the activity release into the atmosphere is estimated as 4.6 TBq, leading to a maximum individual dose equivalent of 0.5 mSv at 800 metres from the berthing location. This activity release is comparable to that obtained in the BEREX TSA study (for a similar accident scenario) but is four orders of magnitude less than that reported in the earlier Davis study where, unrealistically, no credit had been taken for the containment system or for any physical removal processes. (author)

  13. Certification of a submarine design using fiber Bragg grating sensors

    Science.gov (United States)

    Kiddy, Jason S.; Baldwin, Chris S.; Salter, Toni J.

    2004-07-01

    Systems Planning and Analysis, Inc. (SPA) has recently planned, installed, and tested a fiber Bragg grating (FBG) strain sensor system to validate FEM predictions of a new submarine design undergoing American Bureau of Shipping (ABS) certification testing. Fiber optic triaxial, biaxial, and uniaxial gage locations were selected based on the FEM analysis. FBGs were placed on six optical fibers with two fibers (33 sensors) mounted internally to the hull and four fibers (64 sensors) mounted externally. Testing was performed by lowering the submarine to the design depth and recording strain measurements. The optical sensor signals were transmitted directly to the water's surface and monitored by top-side interrogation instrumentation through over 2000 feet of optical cable. Measured temperature-compensated strain values were compared to the FEM predicted strain values with excellent results. To the author's knowledge, this successful test represents the first time that FBG sensors have been used to certify a submarine design and to validate FEM analysis on a large-scale structure.

  14. Genes2FANs: connecting genes through functional association networks

    Directory of Open Access Journals (Sweden)

    Dannenfelser Ruth

    2012-07-01

    Full Text Available Abstract Background Protein-protein, cell signaling, metabolic, and transcriptional interaction networks are useful for identifying connections between lists of experimentally identified genes/proteins. However, besides physical or co-expression interactions there are many ways in which pairs of genes, or their protein products, can be associated. By systematically incorporating knowledge on shared properties of genes from diverse sources to build functional association networks (FANs, researchers may be able to identify additional functional interactions between groups of genes that are not readily apparent. Results Genes2FANs is a web based tool and a database that utilizes 14 carefully constructed FANs and a large-scale protein-protein interaction (PPI network to build subnetworks that connect lists of human and mouse genes. The FANs are created from mammalian gene set libraries where mouse genes are converted to their human orthologs. The tool takes as input a list of human or mouse Entrez gene symbols to produce a subnetwork and a ranked list of intermediate genes that are used to connect the query input list. In addition, users can enter any PubMed search term and then the system automatically converts the returned results to gene lists using GeneRIF. This gene list is then used as input to generate a subnetwork from the user’s PubMed query. As a case study, we applied Genes2FANs to connect disease genes from 90 well-studied disorders. We find an inverse correlation between the counts of links connecting disease genes through PPI and links connecting diseases genes through FANs, separating diseases into two categories. Conclusions Genes2FANs is a useful tool for interpreting the relationships between gene/protein lists in the context of their various functions and networks. Combining functional association interactions with physical PPIs can be useful for revealing new biology and help form hypotheses for further experimentation. Our

  15. Size distributions and failure initiation of submarine and subaerial landslides

    Science.gov (United States)

    ten Brink, U.S.; Barkan, R.; Andrews, B.D.; Chaytor, J.D.

    2009-01-01

    Landslides are often viewed together with other natural hazards, such as earthquakes and fires, as phenomena whose size distribution obeys an inverse power law. Inverse power law distributions are the result of additive avalanche processes, in which the final size cannot be predicted at the onset of the disturbance. Volume and area distributions of submarine landslides along the U.S. Atlantic continental slope follow a lognormal distribution and not an inverse power law. Using Monte Carlo simulations, we generated area distributions of submarine landslides that show a characteristic size and with few smaller and larger areas, which can be described well by a lognormal distribution. To generate these distributions we assumed that the area of slope failure depends on earthquake magnitude, i.e., that failure occurs simultaneously over the area affected by horizontal ground shaking, and does not cascade from nucleating points. Furthermore, the downslope movement of displaced sediments does not entrain significant amounts of additional material. Our simulations fit well the area distribution of landslide sources along the Atlantic continental margin, if we assume that the slope has been subjected to earthquakes of magnitude ??? 6.3. Regions of submarine landslides, whose area distributions obey inverse power laws, may be controlled by different generation mechanisms, such as the gradual development of fractures in the headwalls of cliffs. The observation of a large number of small subaerial landslides being triggered by a single earthquake is also compatible with the hypothesis that failure occurs simultaneously in many locations within the area affected by ground shaking. Unlike submarine landslides, which are found on large uniformly-dipping slopes, a single large landslide scarp cannot form on land because of the heterogeneous morphology and short slope distances of tectonically-active subaerial regions. However, for a given earthquake magnitude, the total area

  16. Structural evolution of deep-water submarine intraplate volcanoes / Azores

    Science.gov (United States)

    Stakemann, Josefine; Huebscher, Christian; Beier, Christoph; Hildenbrand, Anthony; Nomikou, Paraskevi; Terrinha, Pedro; Weiß, Benedikt

    2017-04-01

    We present multibeam and high-resolution reflection seismic data which elucidate the architecture of three submarine intraplate volcanoes located in the southern Azores Archipelago. Data have been collected during RV Meteor cruise M113 in 2015. Four GI-Guns served as the seismic source. The digital streamer comprised 144 channels distributed over a length of 600 m. The three cones are situated in a depth down to 2300 m with heights varying between 200 m and 243 m, an average diameter of 1360 m and an average slope angle of ca. 22°. All three circular cones are surrounded by a circular channel. These features, previously named "fried eggs" were previously interpreted as impact crater (Dias et al., 2009). A comparison with nearby submarine volcanoes close to São Miguel island (Weiß et al., 2015), however, strongly suggests a volcanic origin. The seismic data indicate that the volcanic cones formed on top of a ca. 100 m thick pelagic succession covering the igneous basement. Magma ascent deformed the volcanic basement, displaced the pelagic sediments and a first eruption phase formed a small, seismically transparent volcanic cone. Further eruptions created a volcanic cone with rather transparent reflections within the inferior region changing to strong reflection amplitudes with a chaotic pattern in the superior area. Compared to the igneous basement internal reflection amplitudes are mainly weak. The seismic transparency and slope angle exclude the presence of effusive rocks, since lavas usually create strong impedance contrasts. A comparison of the seismic characteristics with those from submarine Kolumbo volcano (Hübscher et al., 2015) suggests volcaniclastic lithologies from explosive eruptions. The circular channel around the volcanic cone shows the characteristics of a moat channel created by bottom currents. References: Dias, F.C., Lourenco, N., Lobo, A., Santos de Campos, A., Pinto de Abreu, M., 2009. "Fried Egg": An Oceanic Impact Crater in the Mid

  17. Numerical and experimental investigation on aerodynamic performance of small axial flow fan with hollow blade root

    Science.gov (United States)

    Li, Zhang; Jin, Yingzi; Huashu, Dou; Yuzhen, Jin

    2013-10-01

    To reduce the influence of adverse flow conditions at the fan hub and improve fan aerodynamic performance, a modification of conventional axial fan blades with numerical and experimental investigation is presented. Hollow blade root is manufactured near the hub. The numerical and experimental results show that hollow blade root has some effect on the static performance. Static pressure of the modified fan is generally the same with that of the datum fan, while, the efficiency curve of the modified fan has a different trend with that of the datum fan. The highest efficiency of the modified fan is 10% greater than that of the datum fan. The orthogonal experimental results of fan noise show that hollow blade root is a feasible method of reducing fan noise, and the maximum value of noise reduction is about 2 dB. The factors affecting the noise reduction of hollow blade root are in the order of importance as follows: hollow blade margin, hollow blade height and hollow blade width. The much smoother pressure distribution of the modified fan than that of the datum fan is the main mechanism of noise reduction of hollow blade root. The research results will provide the proof of the parameter optimization and the structure design for high performance and low noise small axial fans.

  18. Submarine structure of Reunion Island (Indian Ocean) inferred from gravity

    Science.gov (United States)

    Gailler, L.; Lénat, J.

    2008-12-01

    La Reunion is a large (diameter: 220 km; height: 7 km), mostly immerged (97%) oceanic volcanic system. New land and marine gravity data are used to study the structure of its submarine part. The gravity models are interpreted jointly with the published geology interpretations and compared with magnetic models. This allows us to derive a new model of the shallow and internal structure of the submarine flanks. Recent cruises have collected high quality gravity, magnetic and multi-beam swath bathymetry data over the submarine flanks of La Réunion and the surrounding oceanic plate. A new Bouguer anomaly map has been computed for a reduction density of 2.67.103 kg m-3. A magnetic anomalies map covering the same area has been also built. Studies based on bathymetric and acoustic data have previously shown the presence of different types of submarine features: a coastal shelf, huge bulges built by debris avalanches and sediment deposits, erosion canyons, volcanic constructions near the coast, isolated seamounts offshore, and elongate volcanic ridges on the Mascarene plate. On the new Bouguer anomaly map, all these features are associated with negative anomalies. They have been modeled using 2 3/4 D modeling techniques. The short wavelength anomalies over the coastal shelf area can be explained by piles of low density layers. This suggests that they are mostly built by hyaloclastites which are generally characterized by lower densities than lava flows. The voluminous debris avalanche deposits which formed the huge Submarine Bulges to the east, north, west, and south of the island have also been modeled as low density formations. Each bulge is modeled with an overall density less than 2.67.103 kg m-3, in order to account for its long wavelength anomaly. Some shorter wavelength features are superimposed on these long wavelength negative anomalies. They probably represent heterogeneities within the bulges. Some shallow ones can be associated with observed surface geological

  19. Fan-structure wave as a source of earthquake instability

    Science.gov (United States)

    Tarasov, Boris

    2015-04-01

    Today frictional shear resistance along pre-existing faults is considered to be the lower limit on rock shear strength at confined compression corresponding to the seismogenic layer. This determines the lithospheric strength and the primary earthquake mechanism associated with frictional stick-slip instability on pre-existing faults. This paper introduces a recently identified shear rupture mechanism providing a paradoxical feature of hard rocks - the possibility of shear rupture propagation through the highly confined intact rock mass at shear stress levels significantly less than frictional strength. In the new mechanism the rock failure, associated with consecutive creation of small slabs (known as 'domino-blocks') from the intact rock in the rupture tip, is driven by a fan-shaped domino structure representing the rupture head. The fan-head combines such unique features as: extremely low shear resistance (below the frictional strength), self-sustaining stress intensification in the rupture tip (providing easy formation of new domino-blocks), and self-unbalancing conditions in the fan-head (making the failure process inevitably spontaneous and violent). An important feature of the fan-mechanism is the fact that for the initial formation of the fan-structure an enhanced local shear stress is required, however, after completion of the fan-structure it can propagate as a dynamic wave through intact rock mass at shear stresses below the frictional strength. Paradoxically low shear strength of pristine rocks provided by the fan-mechanism determines the lower limit of the lithospheric strength and favours the generation of new faults in pristine rocks in preference to frictional stick-slip instability along pre-existing faults. The new approach reveals an alternative role of pre-existing faults in earthquake activity: they represent local stress concentrates in pristine rock adjoining the fault where special conditions for the fan-mechanism nucleation are created

  20. Numerical Study of Transition of an Annular Lift Fan Aircraft

    Directory of Open Access Journals (Sweden)

    Yun Jiang

    2016-09-01

    Full Text Available The present study aimed at studying the transition of annular lift fan aircraft through computational fluid dynamics (CFD simulations. The oscillations of lift and drag, the optimization for the figure of merit, and the characteristics of drag, yawing, rolling and pitching moments in transition are studied. The results show that a two-stage upper and lower fan lift system can generate oscillations of lift and drag in transition, while a single-stage inner and outer fan lift system can eliminate the oscillations. The characteristics of momentum drag of the single-stage fans in transition are similar to that of the two-stage fans, but with the peak of drag lowered from 0.63 to 0.4 of the aircraft weight. The strategy to start transition from a negative angle of attack −21° further reduces the peak of drag to 0.29 of the weight. The strategy also reduces the peak of pitching torque, which needs upward extra thrusts of 0.39 of the weight to eliminate. The peak of rolling moment in transition needs differential upward thrusts of 0.04 of the weight to eliminate. The requirements for extra thrusts in transition lead to a total thrust–weight ratio of 0.7, which makes the aircraft more efficient for high speed cruise flight (higher than 0.7 Ma.

  1. Bifurcation analysis of fan casing under rotating air flow excitation

    Institute of Scientific and Technical Information of China (English)

    温登哲; 陈予恕

    2014-01-01

    A fan casing model of cantilever circular thin shell is constructed based on the geometric characteristics of the thin-walled structure of aero-engine fan casing. According to Donnelly’s shell theory and Hamilton’s principle, the dynamic equations are established. The dynamic behaviors are investigated by a multiple-scale method. The effects of casing geometric parameters and motion parameters on the natural frequency of the system are studied. The transition sets and bifurcation diagrams of the system are obtained through a singularity analysis of the bifurcation equation, showing that various modes of the system such as the bifurcation and hysteresis will appear in different parameter regions. In accordance with the multiple relationship of the fan speed and stator vibration frequency, the fan speed interval with the casing vibration sudden jump is calculated. The dynamic reasons of casing cracks are investigated. The possibility of casing cracking hysteresis interval is analyzed. The results show that cracking is more likely to appear in the hysteresis interval. The research of this paper provides a theoretical basis for fan casing design and system parameter optimization.

  2. Fan Noise Source Diagnostic Test: Vane Unsteady Pressure Results

    Science.gov (United States)

    Envia, Edmane

    2002-01-01

    To investigate the nature of fan outlet guide vane pressure fluctuations and their link to rotor-stator interaction noise, time histories of vane fluctuating pressures were digitally acquired as part of the Fan Noise Source Diagnostic Test. Vane unsteady pressures were measured at seven fan tip speeds for both a radial and a swept vane configuration. Using time-domain averaging and spectral analysis, the blade passing frequency (BPF) harmonic and broadband contents of the vane pressures were individually analyzed. Significant Sound Pressure Level (SPL) reductions were observed for the swept vane relative to the radial vane for the BPF harmonics of vane pressure, but vane broadband reductions due to sweep turned out to be much smaller especially on an average basis. Cross-correlation analysis was used to establish the level of spatial coherence of broadband pressures between different locations on the vane and integral length scales of pressure fluctuations were estimated from these correlations. Two main results of this work are: (1) the average broadband level on the vane (in dB) increases linearly with the fan tip speed for both the radial and swept vanes, and (2) the broadband pressure distribution on the vane is nearly homogeneous and its integral length scale is a monotonically decreasing function of fan tip speed.

  3. Numerical Analysis of Erosion Caused by Biomimetic Axial Fan Blade

    Directory of Open Access Journals (Sweden)

    Jun-Qiu Zhang

    2013-01-01

    Full Text Available Damage caused by erosion has been reported in several industries for a wide range of situations. In the present work, a new method is presented to improve the erosion resistance of machine components by biomimetic method. A numerical investigation of solid particle erosion in the standard and biomimetic configuration blade of axial fan is presented. The analysis consists in the application of the discrete phase model, for modeling the solid particles flow, and the Eulerian conservation equations to the continuous phase. The numerical study employs computational fluid dynamics (CFD software, based on a finite volume method. User-defined function was used to define wear equation. Gas/solid flow axial fan was simulated to calculate the erosion rate of the particles on the fan blades and comparatively analyzed the erosive wear of the smooth surface, the groove-shaped, and convex hull-shaped biomimetic surface axial flow fan blade. The results show that the groove-shaped biomimetic blade antierosion ability is better than that of the other two fan blades. Thoroughly analyze of antierosion mechanism of the biomimetic blade from many factors including the flow velocity contours and flow path lines, impact velocity, impact angle, particle trajectories, and the number of collisions.

  4. Topological invariants of a fan associated to a toric variety

    CERN Document Server

    Ford, T J

    1995-01-01

    Associated to a toric variety X of dimension r over a field k is a fan \\Delta on \\Bbb R^r. The fan \\Delta is a finite set of cones which are in one-to-one correspondence with the orbits of the torus action on X. The fan \\Delta inherits the Zariski topology from X. In this article some cohomological invariants of X are studied in terms of whether or not they depend only on \\Delta and not k. Secondly some numerical invariants of X are studied in terms of whether or not they are topological invariants of the fan \\Delta. That is, whether or not they depend only on the finite topological space defined on \\Delta. The invariants with which we are mostly concerned are the class group of Weil divisors, the Picard group, the Brauer group and the dimensions of the torsion free part of the \\'etale cohomology groups with coefficients in the sheaf of units. The notion of an open neighborhood of a fan is introduced and examples are given for which the above invariants are sufficiently fine to give nontrivial stratifications...

  5. "I'm Buffy, and you're history": Putting fan studies into history [editorial

    Directory of Open Access Journals (Sweden)

    Nancy Reagin

    2011-03-01

    Full Text Available This essay kicks off the special historical issue of Transformative Works and Cultures by offering an overview of the ways in which fan communities have been studied by academic historians, and how fan studies has written the history of fan communities. The essay discusses historical work done by amateur fan historians throughout the 20th century; what academic historians can offer fan communities; why academic historians could benefit from studying fandoms as part of the history of popular culture; and what fan studies as a discipline might gain from a broader historical analysis of fandoms.

  6. Design of Conventional Submarines with Advanced Air Independent Propulsion Systems and Determination of Corresponding Theater-Level Impacts

    Science.gov (United States)

    2010-01-01

    Response surface method SOA: Speeds of advance TNSW: Thyssen Nordseewerke GmbH tsnorkeling: Time submarine spends snorkeling tquiet: Time submarine spends on...during snorkeling operations. The limiting factor for the power of the diesel engines is the maximum current limitation on charging the batteries...for the AIP endurance of some of the modern submarines are 12–14. Extended AIP endurance reduces the time that the submarine needs to spend snorkeling

  7. Seismic waveform inversion and imaging of deepwater glacial sedimentary fans in the northern Norwegian-Greenland Sea

    Science.gov (United States)

    Libak, Audun; Poor Moghaddam, Peyman; Minakov, Alexander; Ruud, Bent Ole; Keers, Henk; Mjelde, Rolf

    2013-04-01

    In this poster we show results from 2D acoustic pre-stack depth migration and full waveform inversion using multichannel seismic data, complemented by coincident travel-time tomography of wide-angle ocean bottom seismometer data. The study area is located within the deep ocean basin in the northeastern parts of the Norwegian-Greenland Sea. This area was affected by intense Quaternary glacial sedimentation in the Storfjorden and Bjørnøya Fans and formation of submarine mega-slides. The seismic source used for the data acquisition consisted of an array of six airguns, and the wavefield was recorded by a 3-km-long 240-channel streamer. After some initial processing, pre-stack depth migration and waveform inversion was performed in order to obtain an image the glacial sedimentary package. The background velocity model was obtained from travel time tomography on the coincident ocean bottom seismometer data. We first show inversion results for a test model which is based on the our knowledge of the geology of the area. We then show the inversion results on the real data. One of the main differences between the test inversion and the real data inversion is the inknown source wavelet in the latter case. We show how the source wavelet affects the inversion results and how to properly take the source wavelet into account.

  8. 75 FR 1709 - Security Zone; Escorted U.S. Navy Submarines in Sector Seattle Captain of the Port Zone

    Science.gov (United States)

    2010-01-13

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA87 Security Zone; Escorted U.S. Navy Submarines in Sector.... SUMMARY: The Coast Guard is establishing a moving security zone around any U.S. Navy submarine that is... to help ensure the security of the submarines, their Coast Guard security escorts, and the...

  9. 76 FR 56973 - Office of National Marine Sanctuaries Final Policy and Permit Guidance for Submarine Cable Projects

    Science.gov (United States)

    2011-09-15

    ... Policy and Permit Guidance for Submarine Cable Projects AGENCY: Office of National Marine Sanctuaries...) has developed final policy and permitting guidance for submarine cable projects proposed in national... install and maintain submarine cables in sanctuaries are reviewed consistently and in a manner...

  10. 75 FR 28202 - Security Zone; Escorted U.S. Navy Submarines in Sector Seattle Captain of the Port Zone

    Science.gov (United States)

    2010-05-20

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA87 Security Zone; Escorted U.S. Navy Submarines in Sector... establishing a moving security zone around any U.S. Navy submarine that is operating in the Sector Seattle... of the submarines, their Coast Guard security escorts, and the maritime public in general....

  11. 75 FR 33701 - Security Zone; Escorted U.S. Navy Submarines in Sector Honolulu Captain of the Port Zone

    Science.gov (United States)

    2010-06-15

    ... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA87 Security Zone; Escorted U.S. Navy Submarines in Sector.... SUMMARY: The Coast Guard is establishing a moving security zone around all U.S. Navy submarines that are... to help ensure the security of the submarines, their Coast Guard security escorts, and the...

  12. Index of Submarine Medical Officer’s Qualification Theses 1944-1974

    Science.gov (United States)

    1976-04-01

    REPRESENTATIVE IN THE SUB 1961-0002 CLEAR SU TE MEDICAL DEPARTMENT- + rNUALFWTHE NU 1969-0022 N FBM SUBMARINE MEDICAL DEPARTMENT.= + OF A 1969-0023 73 ...PERSONNJEL.- +BETWEEN QUALIFIED AND U 1969-3017 ISONING FROM, -SUBMAR INE PER SONNET .= CARBON TEIRACHLCRIDE, PC 1944-0033 SUBMARINE ENGINE ROOM

  13. ORAL HEALTH OF OPERATING FLEET BALLISTIC MISSILE SUBMARINE CREWS: A CROSS-SECTIONAL SURVEY.

    Science.gov (United States)

    A cross-sectional survey of two fleet ballistic missile submarine crews revealed no remarkable oral health factors. A close relationship was found...effects of FBM submarine service on oral health could be demonstrated; however, in view of the isolated nature of the FBM patrols great stress needs to

  14. 33 CFR 209.310 - Representation of submarine cables and pipelines on nautical charts.

    Science.gov (United States)

    2010-07-01

    ... cables and pipelines on nautical charts. 209.310 Section 209.310 Navigation and Navigable Waters CORPS OF... of submarine cables and pipelines on nautical charts. (a) The policy of the Corps of Engineers with respect to showing the locations of submarine cables and pipelines on nautical charts published by...

  15. Exploring the Gas Chemistry of Old Submarine Technologies Using Plastic Bottles as Reaction Vessels and Models

    Science.gov (United States)

    Horikoshi, Ryo; Takeiri, Fumitaka; Kobayashi, Yoji; Kageyama, Hiroshi

    2016-01-01

    We describe an activity that is suitable for high school students and makes use of plastic bottles. This activity allows students to familiarize themselves with gas chemistry by introducing technologies that were applied in old submarine systems. Plastic bottles, which are representative of submarines, are used as reaction vessels. Three simple…

  16. Study on the locational criteria for submarine rock repositories of low and medium level radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, G. H.; Kang, W. J.; Kim, T. J. and others [Chungnam National Univ., Taejon (Korea, Republic of)

    1992-01-15

    Submarine repositories have significant advantages over their land counterparts locating close to the areas of daily human activities. Consequently, the construction of submarine repositories on the vast continental shelves around Korean seas is considered to be highly positive. In this context, the development of locational criteria primarily targeting the safety of submarine rock repositories is very important.The contents of the present study are: analyzing characteristics of marine environment: Search of potential hazards to, and environmental impact by, the submarine repositories; Investigation of the oceanographic, geochemical, ecological and sedimentological characteristics of estuaries and coastal seas. Locating potential hazards to submarine repositories by: Bibliographical search of accidents leading to the destruction of submarine structures by turbidity currents and other potentials; Review of turbidity currents. Consideration of environmental impact caused by submarine repositories: Logistics to minimize the environmental impacts in site selection; Removal and dispersion processes of radionuclides in sea water. Analyses of oceanographical characteristics of, and hazard potentials in, the Korean seas. Evaluation of the MOST 91-7 criteria for applicability to submarine repositories and the subsequent proposition of additional criteria.

  17. Submarine Propulsion Shaft Life: Probabilistic Prediction and Extension through Prevention of Water Ingress

    Science.gov (United States)

    2014-06-01

    Inspection. Reliability Engineering and System Safety , 271-292. 47 Shi, P., & Mahadevan, S. (2001). Damage Tolerance Approach for Probabilistic ...Submarine Propulsion Shaft Life: Probabilistic Prediction and Extension through Prevention of Water Ingress By Douglas E. Jonart M.S. Systems...number. 1. REPORT DATE 01 JUN 2014 2. REPORT TYPE 3. DATES COVERED 4. TITLE AND SUBTITLE Submarine Propulsion Shaft Life: Probabilistic

  18. The method to control the submarine horseshoe vortex by breaking the vortex core

    Institute of Scientific and Technical Information of China (English)

    LIU Zhi-hua; XIONG Ying; TU Cheng-xu

    2014-01-01

    The quality of the inflow across the propeller is closely related with the hydrodynamic performance and the noise characteristics of the propeller. For a submarine, with a horseshoe vortex generated at the junction of the main body and the appendages, the submarine wake is dominated by a kind of highly non-uniform flow field, which has an adverse effect on the performance of the submarine propeller. In order to control the horseshoe vortex and improve the quality of the submarine wake, the flow field around a submarine model is simulated by the detached eddies simulation (DES) method, and the vortex configuration is displayed using the second invariant of the velocity derivative tensor. The state and the transition process of the horseshoe vortex are analyzed, then a modified method to break the vortex core by a vortex baffle is proposed. The flow numerical simulation is carried out to study the effect of this method. Numerical simulations show that, with the breakdown of the vortex core, many unstable vortices are shed and the energy of the horseshoe vortex is dissipated quickly, and the uniformity of the submarine wake is improved. The submarine wake test in a wind tunnel has verified the effect of the method to control the horseshoe vortex. The vortex baffle can improve the wake uniformity in cases of high Reynolds numbers as well, and it does not have adverse effects on the maneuverability and the speed ability of the submarine.

  19. Dive! Dive! An Introduction to the History and Technology of Submarines.

    Science.gov (United States)

    Department of the Navy, Washington, DC.

    This resource guide for science and social studies classes explores the world of U.S. Navy submarines and other submersibles. The guide consists of background information on the history and development of submarines and a list of cross-curricular activities to challenge, educate, and entertain students. Students learn the inherent challenges that…

  20. The Relationship of Job Performance to Physical Fitness and Its Application to U. S. Navy Submariners

    Science.gov (United States)

    1981-09-29

    hematologic data collected from 1,017 active duty submariners. The results revealed that percent body fat as determined by skinfold thickness ...and ultimately may lead to increased effectiveness and efficiency of the submarine crew. iii TABLE OF CONTENTS page 1.0 INTRODUCTION 1

  1. Effect of Number of Blades on Performance of Ceiling Fans

    Directory of Open Access Journals (Sweden)

    Adeeb Ehsan

    2015-01-01

    Full Text Available In this paper, the effect of number of blades on ceiling fan performance is discussed. This approach helps to satisfy tradeoff between high air flow (performance and power consumption (energy efficiency. Specifically, variation from two to six blades is considered with nonlinear forward sweep profile. Reynolds Averaged Navier-Stokes (RANS technique is used to model the flow field induced by the ceiling fan inside a generic room. The performance is gauged through response parameters namely volumetric flow rate, mass flow rate, torque and energy efficiency. The results indicate that mass and volumetric flow rates are maximized for six blade configuration and energy efficiency is maximized for two blade configuration. The study indicates the importance of tradeoff between high air flow through ceiling fan and associated energy efficiency.

  2. Performance and Stability Analysis of a Shrouded-Fan UAV

    CERN Document Server

    de Divitiis, Nicola

    2009-01-01

    This paper deals with the estimation of the performance and stability for a shrouded-fan unmanned rotorcraft whose mission profile also prescribes the flight in ground effect. The not so simple estimation of the aerodynamic coefficients and of the thrust in the various situations makes the performance calculation and the stability analysis difficult tasks. This is due to the strong interaction between the fan flow and shroud that causes quite different flow structures about the airframe depending on flight conditions. A further difficulty is related to the ground effect which produces substantial modifications in the rotor thrust and aerodynamic coefficients. To evaluate performance and stability, two models have been developed. One determines the aerodynamic coefficients of the shroud, whereas the other one calculates thrust and moment of the rotors system. Both models take into account the mutual interference between fan flow and fuselage and ground effect. Performance and stability are then discussed with ...

  3. Using Mobile Marketing to Engage NASCAR Fans and Increase Sales

    Directory of Open Access Journals (Sweden)

    MARK DODDS

    2011-01-01

    Full Text Available Mobile marketing displays engage the consumer. This sponsorship activation tactic is highly visible at NASCAR races. Some common elements include show cars, interactive race simulators, video games and race suit/equipment displays. The authors of this study argue that by using mobile marketing effectively as a sponsorship activation tactic, the race fans derive more enjoyment from the race experience. This increased enjoyment links to higher product sales for the sponsor. The implications of this study show that sponsors in other sports should use mobile marketing to increase the fan satisfaction of the game experience in order to increase their product sales. Additionally, event mangers should support mobile marketing as a sponsorship activation tactic with the intention of increasing fan enjoyment and improving attendance.

  4. Particle trajectories and acceleration during 3D fan reconnection

    CERN Document Server

    Dalla, S; 10.1051/0004-6361:200809771

    2008-01-01

    Context. The primary energy release in solar flares is almost certainly due to magnetic reconnection, making this a strong candidate as a mechanism for particle acceleration. While particle acceleration in 2D geometries has been widely studied, investigations in 3D are a recent development. Two main classes of reconnection regimes at a 3D magnetic null point have been identified: fan and spine reconnection Aims. Here we investigate particle trajectories and acceleration during reconnection at a 3D null point, using a test particle numerical code, and compare the efficiency of the fan and spine regimes in generating an energetic particle population. Methods. We calculated the time evolution of the energy spectra. We discuss the geometry of particle escape from the two configurations and characterise the trapped and escaped populations. Results. We find that fan reconnection is less efficent than spine reconnection in providing seed particles to the region of strong electric field where acceleration is possible...

  5. Reflection on Chinese boys' love fans: An insider's view [symposium

    Directory of Open Access Journals (Sweden)

    Erika Junhui Yi

    2013-03-01

    Full Text Available The fandom of BL, as it is known in China, celebrates explicit homoerotic relationships between boys or men—fictional characters taken from mainstream media, real-life celebrities, and male personifications of day-to-day objects and animals, as well as original characters. Mainstream media reports on BL fandom and BL fan girls in China have never been favorable; this subculture and the fans within it are constantly represented in a negative and biased light. But because I am a BL fan girl myself, I can offer an insider's perspective. This essay is a reflection on my personal experiences and observations as a member of BL fandom, and a response to erroneous, stigmatizing claims and moral panic about this community in China.

  6. A velocity parameter for the correlation of axial fan noise

    Science.gov (United States)

    Wright, T.

    1982-08-01

    An aerodynamic parameter that relates subsonic axial fan noise to the fundamental flow behavior in the blade row of a fan is proposed. The parameter is the peak or maximum blade surface velocity in the rotating reference frame and includes, either explicitly or implicitly, the influence of tip speed, volume flow rate, pressure rise, shaft horsepower and efficiency. Correlation of the noise associated with a very broad range of axial fans yields good agreement and collapse of data when compared to currently used correlation methods. Use of this parameter, rather than those based on overall performance, allows trade-off studies to be made within a given performance requirement so that a minimum noise configuration may be designed or selected.

  7. Effect of inlet box on performance of axial flow fans

    Institute of Scientific and Technical Information of China (English)

    Jingyin LI; Hua TIAN; Xiaofang YUAN

    2008-01-01

    Numerical investigations on 3D flow fields in an axial flow fan with and without an inlet box have been extensively conducted, focusing on the variation of fan performance caused by the internal flow fields and the velocity evenness at the exit of the inlet box. It is interest-ing to find that although the inlet box is well designed in accordance with basic design principles, there is a flow separation region in it. Furthermore, this flow separation and the resulting uneven velocity distribution at the exit lead to some decrease in the efficiency and an increase in the total pressure rise of the fan. This research shows that the inlet box needs further improvement and such a check on the flow fields is of value for the design of inlet boxes.

  8. Fan filmmaking and copyright in a global world: Warhammer 40,000 fan films and the case of Damnatus

    Directory of Open Access Journals (Sweden)

    John Walliss

    2010-09-01

    Full Text Available The last decade has witnessed a proliferation, both online and off-line, of films produced by amateurs inspired by mainstream films, TV shows, and novels. As with much other fan production, fan films exist in, at best, a legally gray area since they are produced by amateurs, rather than by the media companies that own the copyrights to the films and novels that provide both their inspiration and settings. I examine the phenomenon of fan filmmaking, focusing on films produced by fans of the Warhammer 40,000 (W40K tabletop battle game. In particular, I examine the case of Damnatus: The Enemy Within (Damnatus: Feind Im Innern, 2005, a German-made fan film set in the W40K universe, which was banned from release by the game's rights holder, the UK company Games Workshop, in 2007. Damnatus offers an interesting case study in both the ongoing struggle between rights holders and textual poachers and the tensions that can exist between different legal understandings of copyright in an increasingly globalized world.

  9. The Reasonable Explanation of Annihilation (fanā in Mysticism

    Directory of Open Access Journals (Sweden)

    Abulfazel Kiashemshaki

    2012-06-01

    Full Text Available Abstrak : Para mistikus melampaui tahap-tahap (derajat kesempurnaan mistik dan maqam spiritual dalam perjalanan mereka menuju Allah yang sulit dimengerti oleh non-mistikus. Karena itu, sebagian besar kalangan reflektif berusaha mengandalkan prinsip-prinsip intelektual dan teoritis mereka untuk memperoleh penjelasan atas pengalaman mistis dan ekstasi. Namun, keberhasilan penjelasannya sepenuhnya berada di bawah kuasa dan kekuatan dari prinsip-prinsip tersebut. (Fanā atau kesirnaan adalah salah satu tahap mistis atau keadaan yang sulit dimengerti oleh non-mistikus sehingga memunculkan berbagai teori yang berbeda untuk menjelaskannya. Pencapaian prestasi ilmiah dan filosofis merupakan penjelasan yang tepat atas fanā. Bagaimanapun upaya yang dilakukan dalam artikel ini membuktikan bahwa satu-satunya penjelasan yang sukses adalah penjelasan yang didasarkan pada prinsip-prinsip teosofi transendental dan mistisisme teoritis.Kata kunci : Fanā, Mistisisme, Penjelasan rasional, Mistisisme teoretis, Filsafat transendentalAbstract : Mystics are passing through stages (degrees of mystic perfection and esoteric abodes (spiritual stations in their spiritual journey to Allah which is difficult for unmystics to understand. Because of this, most of the reflective people are trying to rely on their intellectual and theoretical principles to obtain an understandable explanation of mystical experiences and ecstasy. However the success of such explanation completely lies in the power and strength of the above mentioned principles. (Fanā or annihilation is one of the mystical stages or states which unmystics find very difficult to reasonably understand, hence various and different theories have been provided for its explanation. Various scientific and philosophical achievements are appropriate explanations of annihilation (fanā which is valuable in its place; however effort had been made in this article to prove that the only successful explanation is an

  10. The depth and pitch control of submarines based on the pump-hydraulic servo

    Directory of Open Access Journals (Sweden)

    XU Chao

    2017-03-01

    Full Text Available This study aims to research submarine motion control features in different conditions and com-plex environments in order to solve the problem of actual submarine control and apply it to building an actu-al hydraulic control platform. The paper focuses on the vertical motion of submarines, designs a fast termi-nal sliding mode control algorithm and analyzes the data using the combined simulation and experiment method to study the robustness and reliability of a submarine's vertical motion control system for hydraulic and control. At the same time, the simulation and experiment results analyze the hysteresis and oscillation of the hydraulic steering gear, and effectively reduce the chattering that may be caused by sliding mode variable structure control. This system can be used in simulations to solve the problems of new submarine control characteristics.

  11. The Study on Fatigue Experiment and Reliability Life of Submarine Pipeline Steel

    Directory of Open Access Journals (Sweden)

    Yan Yifei

    2013-02-01

    Full Text Available The aim of the fatigue experiment study is to solve the fatigue fracture problem of X70 submarine tubing when it is under the scouring effect of offshore current. The multilevel fatigue experiments are carried out following the internation (GB4337-84 recommended method. The standard round bar fatigue specimen was made by the material of submarine pipeline steel. The fatigue life of submarine pipeline steel in different survival probability and P-S-N curve were achieved. According to reliability numerical analysis method, the reliability fatigue life of pipeline steel in different stress level is got. The results show that the fatigue life of X70 submarine pipeline steel obeys the normal distribution. The detection of submarine pipeline scouring condation should be enhanced and the pipeline zone which was scoured seriously should be repaired and controlled effectively in order to reduce the scouring effect of ocean current.

  12. The Boundary Layer Interaction with Shock Wave and Expansion Fan

    Institute of Scientific and Technical Information of China (English)

    MaratA.Goldfeld; RomanV.Nestoulia; 等

    2000-01-01

    The results of experimental investigation of a turbulent boundary layer on compression and expansion surfaces are presented.They include the study of the shock wave and /or expansion fan action upon the boundary layer,boundary layer sepqartion and its relaxation.Complex events of paired interactions and the flow on compression convex-concave surfaces were studied.The posibility and conditions of the boundary layer relaminarization behind the expansion fan and its effect on the relaxation length are presented.Different model configurations for wide range conditions were investigated.Comparison of results for different interactions was carried out.

  13. Novel stator design of fan motors using soft magnetic composites

    Science.gov (United States)

    Hsu, Yu-Sheng; Tsai, Mi-Ching; Hsieh, Min-Fu

    2008-04-01

    Cooling fans are an important device needed in consumer electronic products. To enhance the performance of cooling fans, this paper presents a novel brushless dc motor with a three dimensional stator structure using soft magnetic composite to reduce the hub size and allow more airflow. Four models are designed and their output characteristics are compared using finite element simulation. From the results, one of them is selected for prototyping whose performance appears to meet the requirement. The prototype has a 10% smaller diameter than that of conventional types. Moreover, the operation test shows that the required performance is achieved.

  14. On a Fixed Point Theorem of Ky Fan

    Institute of Scientific and Technical Information of China (English)

    DE BLASI Francesco S.; GEORGIEV Pando Gr.

    2002-01-01

    We generalize a theorem of Ky Fan about the nearest distance between a closed convex setD in a Banach space E and its image by a function f: D → E, in several directions: (1) for noncompactsets D, when f(D) precompact; (2) for compact D and upper semicontinuous multifunction f; andmore generally, (3) for noncompact D and upper semicontinuous multifunction f with f(D) Hausdorffprecompact.In particular, we prove a version of the fixed point theorem of Kakutani-Ky Fan for multifunctions,whose values are convex closed bounded, thus not necessarily compact.

  15. Supersonic stall flutter of high-speed fans

    Science.gov (United States)

    Adamczyk, J. J.; Stevans, W.; Jutras, R.

    1981-01-01

    An analytical model is proposed for predicting the onset of supersonic stall bending flutter in high-speed rotors. The analysis is based on a modified two-dimensional, compressible, unsteady actuator disk theory. The stability boundary predicted by the analysis is shown to be in good agreement with the measured boundary of a high speed fan. The prediction that the flutter mode would be a forward traveling wave sensitive to wheel speed and aerodynamic loading is confirmed by experimental measurements. In addition, the analysis shows that reduced frequency and dynamic head also play a significant role in establishing the supersonic stall bending flutter boundary of an unshrouded fan.

  16. The Female Vikings, a women's fan group in Denmark

    DEFF Research Database (Denmark)

    Mintert, Svenja-Maria; Pfister, Gertrud Ursula

    2014-01-01

    Traditionally, football and fandom have been male domains and celebrations of masculinity. So far there has been some sociological and historical research on women's football; however, little is known about women's fandom, in particular about its formation and development. This article focuses...... on the historical development of a Danish women-only fan group called 'The Female Vikings', which support a professional football club, Lyngby Boldklub (BK), in a city north of Copenhagen. The article explores the backgrounds and motivations of female fans, as well as their ways of staging femininity in a man...

  17. The Female Vikings, a women's fan group in Denmark

    DEFF Research Database (Denmark)

    Mintert, Svenja-Maria; Pfister, Gertrud Ursula

    2014-01-01

    Traditionally, football and fandom have been male domains and celebrations of masculinity. So far there has been some sociological and historical research on women's football; however, little is known about women's fandom, in particular about its formation and development. This article focuses......'s world. Drawing on available information about football and fans in Denmark, we have reconstructed the developments of both Lyngby BK and its supporters. Special focus was placed on the histories and cultures as well as the experiences of female fans in this club. Insights into the foundation...

  18. Performance evaluation methods and instrumentation for mine ventilation fans

    Institute of Scientific and Technical Information of China (English)

    LI Man; WANG Xue-rong

    2009-01-01

    Ventilation fans are one of the most important pieces of equipment in coal mines. Their performance plays an important role in the safety of staff and production. Given the actual requirements of coal mine production, we instituted a research project on the measurement methods of key performance parameters such as wind pressure, amount of ventilation and power. At the end a virtual instrument for mine ventilation fans performance evaluation was developed using a USB interface. The practical perform-ance and analytical results of our experiments show that it is feasible, reliable and effective to use the proposed instrumentation for mine ventilation performance evaluation.

  19. "Cultural acupuncture": Fan activism and the Harry Potter Alliance

    Directory of Open Access Journals (Sweden)

    Henry Jenkins

    2012-06-01

    Full Text Available Fan activists have struggled to defend series from cancellation, defend themselves from cease and desist orders, promote alternative representations, and raise money for charity. Building on this background, this article examines how the Harry Potter Alliance encourages young people to speak out as fans on a broad range of human rights and social justice issues through what the group's leader, Andrew Slack, calls "cultural acupuncture." The group's practice of mapping the fictional content world onto real-world concerns helps empower young people to become civicly engaged and politically active.

  20. Post-eruptive Submarine Terrace Development of Capelinhos, Azores

    Science.gov (United States)

    Zhongwei Zhao, Will; Mitchell, Neil; Quartau, Rui; Tempera, Fernando; Bricheno, Lucy

    2017-04-01

    Erosion of the coasts of volcanic islands by waves creates shallow banks, but how erosion proceeds with time to create them and how it relates to wave climate is unclear. In this study, historical and recent marine geophysical data collected around the Capelinhos promontory (western Faial Island, Azores) offer an unusual opportunity to characterize how a submarine terrace developed after the eruption. The promontory was formed in 1957/58 during a Surtseyan eruption that terminated with extensive lava forming new rocky coastal cliffs. Historical measurements of coastline position are supplemented here with coastlines measured from 2004 and 2014 Google Earth images in order to characterize coastline retreat rate and distance for lava- and tephra-dominated cliffs. Swath mapping sonars were used to characterize the submarine geometry of the resulting terrace (terrace edge position, gradient and morphology). Limited photographs are available from a SCUBA dive and drop-down camera deployments to ground truth the submarine geomorphology. The results reveal that coastal retreat rates have decreased rapidly with the time after the eruption, possibly explained by the evolving resistance to erosion of cliff base materials. Surprisingly, coastline retreat rate decreases with terrace width in a simple inverse power law with terrace width. We suspect this is only a fortuitous result as wave attenuation over the terrace will not obviously produce the variation, but nevertheless it shows how rapidly the retreat rate declines. Understanding the relationship between terrace widening shelf and coastal cliff retreat rate may be more widely interesting if they can be used to understand how islands evolve over time into abrasional banks and guyots.

  1. Submarine periscope thermal imaging: its evolution in the UK

    Science.gov (United States)

    Armstrong, George R.

    1996-06-01

    The first submarine periscope to carry a thermal imaging sensor started sea trials in 1978. As a leading EO company and the sole supplier of periscopes to the Royal Navy since 1917, Pilkington Optronics (Barr & Stroud) has led the evolution of this technology in the UK. As is often the case, the evolutionary path has been IR detector technology- led. The first operational periscope TI system (1981) used a serial/parallel array of first generation photoconductive detectors operating in the LWIR (8 - 12 micrometer) waveband. The advent of SPRITE detectors in the 1980s opened the way to greatly improved performance within a reduced space volume, culminating in 1993 with the entry into fleet service of the SPRITE-based IR028 modular system for Vanguard, the new class of RN ballistic submarines. Today, second generation focal plane array detectors, along with the concept of the non-hull penetrating optronics mast, are ready to revolutionize periscope TI. The Pilkington Optronics CM10 Optronics Mast, presently under development, has been bid for the next class of RN submarines, Trafalgar Batch 2. CM10 exists in two versions, allowing the user to choose the operational waveband most suited to his operational needs. The sensor in the LWIR version is the PO high definition thermal imager (HDTI), which makes optimum use of SPRITEs to achieve very high performance within a compact space. The MWIR version features dual-band (TV plus 3 - 5 micrometer) optics viewing through a single pressure window; the TI sensor is based on a microscanned CMT FPA, yielding high spatial resolution and thermal sensitivity with small aperture optics.

  2. A real two-phase submarine debris flow and tsunami

    Energy Technology Data Exchange (ETDEWEB)

    Pudasaini, Shiva P.; Miller, Stephen A. [Department of Geodynamics and Geophysics, Steinmann Institute, University of Bonn Nussallee 8, D-53115, Bonn (Germany)

    2012-09-26

    The general two-phase debris flow model proposed by Pudasaini is employed to study subaerial and submarine debris flows, and the tsunami generated by the debris impact at lakes and oceans. The model, which includes three fundamentally new and dominant physical aspects such as enhanced viscous stress, virtual mass, and generalized drag (in addition to buoyancy), constitutes the most generalized two-phase flow model to date. The advantage of this two-phase debris flow model over classical single-phase, or quasi-two-phase models, is that the initial mass can be divided into several parts by appropriately considering the solid volume fraction. These parts include a dry (landslide or rock slide), a fluid (water or muddy water; e.g., dams, rivers), and a general debris mixture material as needed in real flow simulations. This innovative formulation provides an opportunity, within a single framework, to simultaneously simulate the sliding debris (or landslide), the water lake or ocean, the debris impact at the lake or ocean, the tsunami generation and propagation, the mixing and separation between the solid and fluid phases, and the sediment transport and deposition process in the bathymetric surface. Applications of this model include (a) sediment transport on hill slopes, river streams, hydraulic channels (e.g., hydropower dams and plants); lakes, fjords, coastal lines, and aquatic ecology; and (b) submarine debris impact and the rupture of fiber optic, submarine cables and pipelines along the ocean floor, and damage to offshore drilling platforms. Numerical simulations reveal that the dynamics of debris impact induced tsunamis in mountain lakes or oceans are fundamentally different than the tsunami generated by pure rock avalanches and landslides. The analysis includes the generation, amplification and propagation of super tsunami waves and run-ups along coastlines, debris slide and deposition at the bottom floor, and debris shock waves. It is observed that the

  3. Two Submarine Pipelines To Be Built in Bohai Sea

    Institute of Scientific and Technical Information of China (English)

    1997-01-01

    @@ To ensure the second step forward of CNOOC on oil/gas output for the Ninth -Five-Year Plan period, a transcentury project embarked upon its implementation in an all-round way at the beginning of this year by Bohai Company, i.e. two submarine oil/gas pipelines are going to be built across the Bohai Seabed. The two pipelines are of remarkably strategic significance for delivering the abundant resources of oil and gas developed in the Bohai Sea waters to the coastal cities in support of local economic construction and, in a couple of years, they will become "energy corridors" with great economic expectation.

  4. Submarine landslides along the eastern Mediterranean Israeli continental slope

    Science.gov (United States)

    Reuven, Einav; Katz, Oded; Aharonov, Einat

    2013-04-01

    Numerous shallow submarine slope failures (scars and deposits) are observed in recent high resolution bathymetric grids of the continental slope off the Israeli eastern Mediterranean coast. The nature of these slope failures is currently not comprehensively understood as well as the question of whether the eastern Mediterranean continental slope is continuously or episodically unstable. We report here first steps towards understanding the present state of this submarine landslide system, which include mapping and analyzing the geology of the landslides and the hosting slopes. The continental slope extends from water depths of about 150 to more than 1000 meters with a slope of less than 5 degrees in general. Bathymetric grids with pixel resolution of 15 m till water depth of 700 m and 50 m till water depth of 1700 m were used. Analyzing the bathymetry revealed three main submarine surface features: (a) numerous shallow landslides, within the upper sequence of the post-Messenian sediments. Landslide widths range between hundreds to thousand of meters at the scar, with scar heights up to hundred meters. The toes of the landslides are not always mapable and lay up to a few kilometers down slope from the scar. Slope angles within the scars are 5 to more than15 degrees. At least two types of landslides were detected: presumably young slides with sharp scars, and presumably old slides with secondary slides and secondary drainage systems developed within the scar area; (b) a few kilometers long, north striking step-like lineaments. Step heights are up to 100 meters and the slopes are up to 20 degrees. The offset between parallel steps is less than a kilometer to a few kilometers. The steps are interpreted as surface expressions of growth faults rooted at the Messinian evaporates up to 1.5 kilometers below surface; (c) a few north striking channels were also detected with steep walls of more than 15 degrees, up to two kilometers width and a few kilometers length. The nature

  5. Towards a three-component model of fan loyalty: a case study of Chinese youth.

    Science.gov (United States)

    Zhang, Xiao-xiao; Liu, Li; Zhao, Xian; Zheng, Jian; Yang, Meng; Zhang, Ji-qi

    2015-01-01

    The term "fan loyalty" refers to the loyalty felt and expressed by a fan towards the object of his/her fanaticism in both everyday and academic discourses. However, much of the literature on fan loyalty has paid little attention to the topic from the perspective of youth pop culture. The present study explored the meaning of fan loyalty in the context of China. Data were collected by the method of in-depth interviews with 16 young Chinese people aged between 19 and 25 years who currently or once were pop fans. The results indicated that fan loyalty entails three components: involvement, satisfaction, and affiliation. These three components regulate the process of fan loyalty development, which can be divided into four stages: inception, upgrade, zenith, and decline. This model provides a conceptual explanation of why and how young Chinese fans are loyal to their favorite stars. The implications of the findings are discussed.

  6. ON A KIND OF GENERALIZED QUASI-VARIATIONAL INEQUALITIES AND FAN's MINIMAX INEQUALITY WITHOUT CONVEXITY

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper gives a Fan,s type minimax theorem, a nearst point theorem and two existence theorems of solutions for a kind of generalized quasi-variational inequalities in H-spaces without any linear structure.

  7. Towards a three-component model of fan loyalty: a case study of Chinese youth.

    Directory of Open Access Journals (Sweden)

    Xiao-xiao Zhang

    Full Text Available The term "fan loyalty" refers to the loyalty felt and expressed by a fan towards the object of his/her fanaticism in both everyday and academic discourses. However, much of the literature on fan loyalty has paid little attention to the topic from the perspective of youth pop culture. The present study explored the meaning of fan loyalty in the context of China. Data were collected by the method of in-depth interviews with 16 young Chinese people aged between 19 and 25 years who currently or once were pop fans. The results indicated that fan loyalty entails three components: involvement, satisfaction, and affiliation. These three components regulate the process of fan loyalty development, which can be divided into four stages: inception, upgrade, zenith, and decline. This model provides a conceptual explanation of why and how young Chinese fans are loyal to their favorite stars. The implications of the findings are discussed.

  8. Experimental investigation of the noise emission of axial fans under distorted inflow conditions

    Science.gov (United States)

    Zenger, Florian J.; Renz, Andreas; Becher, Marcus; Becker, Stefan

    2016-11-01

    An experimental investigation on the noise emission of axial fans under distorted inflow conditions was conducted. Three fans with forward-skewed fan blades and three fans with backward-skewed fan blades and a common operating point were designed with a 2D element blade method. Two approaches were adopted to modify the inflow conditions: first, the inflow turbulence intensity was increased by two different rectangular grids and second, the inflow velocity profile was changed to an asymmetric characteristic by two grids with a distinct bar stacking. An increase in the inflow turbulence intensity affects both tonal and broadband noise, whereas a non-uniform velocity profile at the inlet influences mainly tonal components. The magnitude of this effect is not the same for all fans but is dependent on the blade skew. The impact is greater for the forward-skewed fans than for the backward-skewed and thus directly linked to the fan blade geometry.

  9. Design and Research of Intelligent Remote Control Fan Based on Single Chip Microcomputer and Bluetooth Technology

    National Research Council Canada - National Science Library

    Xue-Xia Zhang; You-Yun Dang; An-Ying Fu

    2017-01-01

    This paper is designed for intelligent remote control fans. The design of the microcontroller as the core, the sensor, Bluetooth and Andrews system applied to the design of intelligent remote control fan...

  10. A Critical Review of Computational Methods and Their Application in Industrial Fan Design

    OpenAIRE

    Alessandro Corsini; Giovanni Delibra; Sheard, Anthony G.

    2013-01-01

    Members of the aerospace fan community have systematically developed computational methods over the last five decades. The complexity of the developed methods and the difficulty associated with their practical application ensured that, although commercial computational codes date back to the 1980s, they were not fully exploited by industrial fan designers until the beginning of the 2000s. The application of commercial codes proved to be problematic as, unlike aerospace fans, industrial fans i...

  11. Debris-flow dominance of alluvial fans masked by runoff reworking and weathering.

    OpenAIRE

    Haas, T.; Ventra, D.; Carbonneau, P. E.; Kleinhans, M. G.

    2014-01-01

    Arid alluvial fan aggradation is highly episodic and fans often comprise active and inactive sectors. Hence the morphology and texture of fan surfaces are partly determined by secondary processes of weathering and erosion in addition to primary processes of aggradation. This introduces considerable uncertainty in the identification of formative processes of terrestrial and Martian fans from aerial and satellite imagery. The objectives of this study are (i) to develop a model to describe the s...

  12. A secondary source configuration for control of a ventilation fan noise in ducts

    OpenAIRE

    Čudina, Mirko; Prezelj, Jurij

    2015-01-01

    The main noise source in heating, ventilation, and air conditioning systems is usually a ventilating fan. Noise, generated by the ventilating fan is transmitted through the duct into the living and working environment. A typical fan noise spectrum consists of a broadband noise, which is superimposed with pure tones. Different methods are available to reduce a transmission of such noise from the ventilating fan into the living and working environment. In this article it is demonstrated how a f...

  13. Surface morphology of fans in the high-Arctic periglacial environment of Svalbard : Controls and processes

    NARCIS (Netherlands)

    De Haas, Tjalling; Kleinhans, Maarten G.; Carbonneau, Patrice E.; Rubensdotter, Lena; Hauber, Ernst

    2015-01-01

    Fan-shaped landforms occur in all climatic regions on Earth. They have been extensively studied in many of these regions, but there are few studies on fans in periglacial, Arctic and Antarctic regions. Fans in such regions are exposed to many site-specific environmental conditions in addition to the

  14. 30 CFR 75.313 - Main mine fan stoppage with persons underground.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main mine fan stoppage with persons underground... COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.313 Main mine fan stoppage with persons underground. (a) If a main mine fan stops while anyone is underground...

  15. Debris-flow dominance of alluvial fans masked by runoff reworking and weathering

    NARCIS (Netherlands)

    de Haas, Tjalling; Ventra, Dario; Carbonneau, Patrice E.; Kleinhans, Maarten G.

    2014-01-01

    Arid alluvial fan aggradation is highly episodic and fans often comprise active and inactive sectors. Hence the morphology and texture of fan surfaces are partly determined by secondary processes of weathering and erosion in addition to primary processes of aggradation. This introduces considerable

  16. Some giant submarine landslides do not produce large tsunamis

    Science.gov (United States)

    Løvholt, Finn; Bondevik, Stein; Laberg, Jan Sverre; Kim, Jihwan; Boylan, Noel

    2017-08-01

    Landslides are the second most important cause of tsunamis after earthquakes, and their potential for generating large tsunamis depend on the slide process. Among the world's largest submarine landslides is the Storegga Slide that generated a large tsunami over an ocean-wide scale, while no traces of a tsunami generated from the similar and nearby Trænadjupet Slide have been found. Previous models for such landslide tsunamis have not been able to capture the complexity of the landslide processes and are at odds with geotechnical and geomorphological data that reveal retrogressive landslide development. The tsunami generation from these massive events are here modeled with new methods that incorporate complex retrogressive slide motion. We show that the tsunamigenic strength is closely related to the retrogressive development and explain, for the first time, why similar giant landslides can produce very different tsunamis, sometimes smaller than anticipated. Because these slide mechanisms are common for submarine landslides, modeling procedures for dealing with their associated tsunamis should be revised.

  17. Finite volume methods for submarine debris flows and generated waves

    Science.gov (United States)

    Kim, Jihwan; Løvholt, Finn; Issler, Dieter

    2016-04-01

    Submarine landslides can impose great danger to the underwater structures and generate destructive tsunamis. Submarine debris flows often behave like visco-plastic materials, and the Herschel-Bulkley rheological model is known to be appropriate for describing the motion. In this work, we develop numerical schemes for the visco-plastic debris flows using finite volume methods in Eulerian coordinates with two horizontal dimensions. We provide parameter sensitivity analysis and demonstrate how common ad-hoc assumptions such as including a minimum shear layer depth influence the modeling of the landslide dynamics. Hydrodynamic resistance forces, hydroplaning, and remolding are all crucial terms for underwater landslides, and are hence added into the numerical formulation. The landslide deformation is coupled to the water column and simulated in the Clawpack framework. For the propagation of the tsunamis, the shallow water equations and the Boussinesq-type equations are employed to observe how important the wave dispersion is. Finally, two cases in central Norway, i.e. the subaerial quick clay landslide at Byneset in 2012, and the submerged tsunamigenic Statland landslide in 2014, are both presented for validation. The research leading to these results has received funding from the Research Council of Norway under grant number 231252 (Project TsunamiLand) and the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement 603839 (Project ASTARTE).

  18. Large-eddy simulations of a propelled submarine model

    Science.gov (United States)

    Posa, Antonio; Balaras, Elias

    2015-11-01

    The influence of the propeller on the wake as well as the evolution of the turbulent boundary layers over an appended notional submarine geometry (DARPA SUBOFF) is reported. The present approach utilizes a wall-resolved LES, coupled with an immersed boundary formulation, to simulate the flow model scale Reynolds numbers (Re = 1 . 2 e + 06 , based on the free-stream velocity and the length of the body). Cylindrical coordinates are adopted, and the computational grid is composed of 3.5 billion nodes. Our approach has been validated on the appended submarine body in towed conditions (without propeller), by comparisons to wind tunnel experiments in the literature. The comparison with the towed configuration shows profound modifications in the boundary layer over the stern surface, due to flow acceleration, with higher values of turbulent kinetic energy in the inner layer and lower values in the outer layer. This behavior was found tied to a different topology of the coherent structures between propelled and towed cases. The wake is also highly affected, and the momentum deficit displays a non-monotonic evolution downstream. An axial peak of turbulent kinetic energy replaces the bimodal distribution of the stresses in the wake, observed in the towed configuration. Supported by ONR Grant N000141110455, monitored by Dr. Ki-Han Kim.

  19. Simulation of Wave-Plus-Current Scour beneath Submarine Pipelines

    DEFF Research Database (Denmark)

    Eltard-Larsen, Bjarke; Fuhrman, David R.; Sumer, B. Mutlu

    2016-01-01

    A fully coupled hydrodynamic and morphologic numerical model was utilized for the simulation of wave-plus-current scour beneath submarine pipelines. The model was based on incompressible Reynolds-averaged Navier–Stokes equations, coupled with k-ω turbulence closure, with additional bed and suspen......A fully coupled hydrodynamic and morphologic numerical model was utilized for the simulation of wave-plus-current scour beneath submarine pipelines. The model was based on incompressible Reynolds-averaged Navier–Stokes equations, coupled with k-ω turbulence closure, with additional bed...... and suspended load descriptions forming the basis for seabed morphology. The model was successfully validated against experimental measurements involving scour development and eventual equilibrium in pure-current flows over a range of Shields parameters characteristic of both clear-water and live-bed regimes....... This validation complements previously demonstrated accuracy for the same model in simulating pipeline scour processes in pure-wave environments. The model was subsequently utilized to simulate combined wave-plus-current scour over a wide range of combined Keulegan–Carpenter numbers and relative current strengths...

  20. Similarities in the chemistry of shallow submarine hydrothermal vents

    Energy Technology Data Exchange (ETDEWEB)

    Prol-Ledesma, R.M. [UNAM, Mexico City (Mexico). Instituto de Geofisica

    2003-12-01

    Shallow submarine hydrothermal activity has been observed in Western Mexico related to extensional tectonic faults. Hydrothermal vents occur at Punta Banda on the Pacific coast of Baja California, at Bahia Concepcion on the eastern coast of Baja California, and in Punta Mita on the Pacific coast of central Mexico. Submarine discharge of geothermal fluids is located at depths varying between 5 and 30 m. Water and gas discharge at temperatures between 40 and more than 100{sup o}C. The composition of the thermal end-member can be calculated for Mg=0 using the chemistry data of the water samples. A linear regression of the concentration values vs magnesium content is used to determine the concentration of the end-member thermal water. The chemical composition of the thermal end-member indicates that the water is more dilute than seawater and enriched in Ca, Mn, Ba, I, Cs, B, Li, Rb, Sr and Si. The results show that the water chemistry is similar in these coastal hydrothermal systems. The thermal water is probably of meteoric origin, penetrating through the extensional faults, and heated by the high geothermal gradient. The components in the thermal water are contributed by the deep strata. (author)

  1. LES of a submarine model in self-propulsion

    Science.gov (United States)

    Posa, Antonio; Balaras, Elias

    2016-11-01

    Wall-resolved LES computations are presented on the flow over a notional submarine geometry in self-propelled conditions at Re=1.2e+06 (based on the free-stream velocity and the length of the body). The rotational speed of the propeller was dynamically adjusted during the simulation using a proportional-integral controller, in order for the propeller thrust to balance the overall drag on the system. An immersed-boundary methodology was adopted to enforce boundary conditions over the body. Comparisons with the same submarine geometry in the towed configuration allowed us to verify that the boundary layer over the hull surface is affected only in the stern region, while that over the cylindrical mid-body is roughly in equilibrium in both towed and self-propelled conditions. The quasi-streamwise structures of the turbulent boundary layer and their development along the stern dominate the flow ingested by the propeller. The wake and junction flows from the fins break the axial symmetry of such flow. Comparisons with the towed configuration verify that the propeller affects substantially its own inflow, defined by the overlapping effects of adverse pressure gradient, due to the tapered geometry of the stern, and suction generated by the same propeller. This work is supported by the Office of Naval Research, under Grant No. N000141110455, monitored by Dr. Ki-Han Kim.

  2. ATTICA family of thermal cameras in submarine applications

    Science.gov (United States)

    Kuerbitz, Gunther; Fritze, Joerg; Hoefft, Jens-Rainer; Ruf, Berthold

    2001-10-01

    Optronics Mast Systems (US: Photonics Mast Systems) are electro-optical devices which enable a submarine crew to observe the scenery above water during dive. Unlike classical submarine periscopes they are non-hull-penetrating and therefore have no direct viewing capability. Typically they have electro-optical cameras both for the visual and for an IR spectral band with panoramic view and a stabilized line of sight. They can optionally be equipped with laser range- finders, antennas, etc. The brand name ATTICA (Advanced Two- dimensional Thermal Imager with CMOS-Array) characterizes a family of thermal cameras using focal-plane-array (FPA) detectors which can be tailored to a variety of requirements. The modular design of the ATTICA components allows the use of various detectors (InSb, CMT 3...5 μm , CMT 7...11 μm ) for specific applications. By means of a microscanner ATTICA cameras achieve full standard TV resolution using detectors with only 288 X 384 (US:240 X 320) detector elements. A typical requirement for Optronics-Mast Systems is a Quick- Look-Around capability. For FPA cameras this implies the need for a 'descan' module which can be incorporated in the ATTICA cameras without complications.

  3. Palaeoflow reconstruction from fan delta morphology on Mars

    NARCIS (Netherlands)

    Kleinhans, M.G.; Kasteele, H.E. van de; Hauber, E.

    2010-01-01

    Alluvial fans and deltas on Mars record past hydrological conditions. Until now these conditions have been inferred from the morphology of the feeder channels and the deposits from images and digital terrain models (DTMs), and from calculations of the bulk fluxes of water and sediment based on the d

  4. KKM and KY fan theorems in modular function spaces

    Directory of Open Access Journals (Sweden)

    Latif Abdul

    2011-01-01

    Full Text Available Abstract In modular function spaces, we introduce Knaster-Kuratowski-Mazurkiewicz mappings (in short KKM-mappings and prove an analogue to Ky Fan s fixed point theorem. 2010 Mathematics Subject Classification: Primary 46B20, 47H09; Secondary 47H10.

  5. The Nonrelativistic Scattering States of the Deng-Fan Potential

    Directory of Open Access Journals (Sweden)

    Bentol Hoda Yazarloo

    2013-01-01

    Full Text Available The approximately analytical scattering state solution of the Schrodinger equation is obtained for the Deng-Fan potential by using an approximation scheme to the centrifugal term. Energy eigenvalues, normalized wave functions, and scattering phase shifts are calculated. We consider and verify two special cases: the l=0 and the s-wave Hulthén potential.

  6. Modeling Fan Effects on the Time Course of Associative Recognition

    Science.gov (United States)

    Schneider, Darryl W.; Anderson, John R.

    2012-01-01

    We investigated the time course of associative recognition using the response signal procedure, whereby a stimulus is presented and followed after a variable lag by a signal indicating that an immediate response is required. More specifically, we examined the effects of associative fan (the number of associations that an item has with other items…

  7. Investigation of Cross Flow Fan Propulsion for Lightweight VTOL Aircraft

    Science.gov (United States)

    2000-12-01

    the aircraft longitudinal axis due to the total length of the unit. A total fan span of 20.6 inches is required to produce 690 lbf of thrust when...which are mounted parallel to the aircraft longitudinal axis and rest perpendicular, would be actuated as required to provide yaw control and aft

  8. Studying a Spacecraft Ventilation Fan: Progress and Possibilities

    Science.gov (United States)

    Koch, L. Denielle

    2011-01-01

    This document describes a presentation delivered to the Acoustics Technical Working Group at a meeting held in Cleveland, Ohio on April 21-22, 2011. The information contained in this presentation is considered to be preliminary, intended to begin a general discussion among audience members on the challenges associated with spacecraft ventilation fans and possible avenues of continued research.

  9. Propellers And Fans Based On The Moebius Strip

    Science.gov (United States)

    Seiner, John Milton; Gilinsky, Mikhail Markovich

    1996-01-01

    Moebius strip proposed as basis for optimally shaped airplane and boat propellers, fans, helicopter rotors, mixing screws, coffee grinders, and concrete mixers. Basic idea of optimal shaping of such device to increase working efficiency by increasing area for capture of still medium without increasing power needed for rotation.

  10. Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade

    Directory of Open Access Journals (Sweden)

    J. Lepicovsky

    2004-01-01

    velocity.To date, this flow behavior has only been observed in a linear transonic cascade. Further research is necessary to confirm this phenomenon occurs in actual transonic fans and is not the by-product of an endwall restricted linear cascade.

  11. Energy efficient engine shroudless, hollow fan blade technology report

    Science.gov (United States)

    Michael, C. J.

    1981-01-01

    The Shroudless, Hollow Fan Blade Technology program was structured to support the design, fabrication, and subsequent evaluation of advanced hollow and shroudless blades for the Energy Efficient Engine fan component. Rockwell International was initially selected to produce hollow airfoil specimens employing the superplastic forming/diffusion bonding (SPF/DB) fabrication technique. Rockwell demonstrated that a titanium hollow structure could be fabricated utilizing SPF/DB manufacturing methods. However, some problems such as sharp internal cavity radii and unsatisfactory secondary bonding of the edge and root details prevented production of the required quantity of fatigue test specimens. Subsequently, TRW was selected to (1) produce hollow airfoil test specimens utilizing a laminate-core/hot isostatic press/diffusion bond approach, and (2) manufacture full-size hollow prototype fan blades utilizing the technology that evolved from the specimen fabrication effort. TRW established elements of blade design and defined laminate-core/hot isostatic press/diffusion bonding fabrication techniques to produce test specimens. This fabrication technology was utilized to produce full size hollow fan blades in which the HIP'ed parts were cambered/twisted/isothermally forged, finish machined, and delivered to Pratt & Whitney Aircraft and NASA for further evaluation.

  12. SOME GENERALIZATIONS OF KY FAN'S BEST APPROXIMATION THEOREM

    Institute of Scientific and Technical Information of China (English)

    A.R.Khan; N.Hussain; A.B.Thaheem

    2004-01-01

    We pressent new Ky Fan type best approximation theorems for a discontinuous multivalued map on metrizable topological vector spaces and hyperconvex spaces. In addition, fixed point results are derived for the map studied. Our work generalizes severl results in approximation theory.

  13. Così fan tutte: Brilliance or Buffoonery?

    Directory of Open Access Journals (Sweden)

    Sarah Whitfield

    2011-12-01

    Full Text Available Hardly any opera has endured more scrutiny and self-preserving apology than Mozart’s Così fan tutte. Flagrant opposition and a long string of “rescue” attempts shroud the receptive history of the work. Since its premiere, Così fan tutte has long been recognized as a problem opera. Many critics found it implausible that Mozart—the consummate composer and man that warranted their idolization—could have stooped so low as to agree to such an immoral plot. The great beauty in Mozart’s musical parody is that it at once mocks and transforms the supposed superficial experiment of Lorenzo Da Ponte’s libretto. The parody in Così fan tutte must be correctly interpreted. It is rampant, but it exists for much more than a perfunctory laugh. The beauty of Mozart’s music—in both moments of wild parody and heartfelt emotion—succeeds in giving Così fan tutte a depth that is both challenging and transforming.

  14. Analysis and control of computer cooling fan noise

    Science.gov (United States)

    Wong, Kam

    This thesis is divided into three parts: the study of the source mechanisms and their separation, passive noise control, and active noise control. The mechanisms of noise radiated by a typical computer cooling fan is investigated both theoretically and experimentally focusing on the dominant rotor-stator interaction. The unsteady force generated by the aerodynamic interaction between the rotor blades and struts is phase locked with the blade rotation and radiates tonal noise. Experimentally, synchronous averaging with the rotation signal extracts the tones made by the deterministic part of the rotor-strut interaction mechanism. This averaged signal is called the rotary noise. The difference between the overall noise and rotary noise is defined as random noise which is broadband in the spectrum. The deterministic tonal peaks are certainly more annoying than the broadband, so the suppression of the tones is the focus of this study. Based on the theoretical study of point force formulation, methods are devised to separate the noise radiated by the two components of drag and thrust forces on blades and struts. The source separation is also extended to the leading and higher order modes of the spinning pressure pattern. By using the original fan rotor and installing it in various casings, the noise sources of the original fan are decomposed into elementary sources through directivity measurements. Details of the acoustical directivity for the original fan and its various modifications are interpreted. For the sample fan, two common features account for most of the tonal noise radiated. The two features are the inlet flow distortion caused by the square fan casing, and the large strut carrying the electric wires for the motor. When the inlet bellmouth is installed and the large strut is trimmed down to size, a significant reduction of 12 dB in tonal sound power is achieved. These structural corrections constitute the passive noise control. However, the end product still

  15. First Test of Fan Active Noise Control (ANC) Completed

    Science.gov (United States)

    2005-01-01

    With the advent of ultrahigh-bypass engines, the space available for passive acoustic treatment is becoming more limited, whereas noise regulations are becoming more stringent. Active noise control (ANC) holds promise as a solution to this problem. It uses secondary (added) noise sources to reduce or eliminate the offending noise radiation. The first active noise control test on the low-speed fan test bed was a General Electric Company system designed to control either the exhaust or inlet fan tone. This system consists of a "ring source," an induct array of error microphones, and a control computer. Fan tone noise propagates in a duct in the form of spinning waves. These waves are detected by the microphone array, and the computer identifies their spinning structure. The computer then controls the "ring source" to generate waves that have the same spinning structure and amplitude, but 180 out of phase with the fan noise. This computer generated tone cancels the fan tone before it radiates from the duct and is heard in the far field. The "ring source" used in these tests is a cylindrical array of 16 flat-plate acoustic radiators that are driven by thin piezoceramic sheets bonded to their back surfaces. The resulting source can produce spinning waves up to mode 7 at levels high enough to cancel the fan tone. The control software is flexible enough to work on spinning mode orders from -6 to 6. In this test, the fan was configured to produce a tone of order 6. The complete modal (spinning and radial) structure of the tones was measured with two builtin sets of rotating microphone rakes. These rakes provide a measurement of the system performance independent from the control system error microphones. In addition, the far-field noise was measured with a semicircular array of 28 microphones. This test represents the first in a series of tests that demonstrate different active noise control concepts, each on a progressively more complicated modal structure. The tests are

  16. Multidisciplinary Investigations of Submarine Flow to Biscayne Bay, Florida

    Science.gov (United States)

    Halley, R. B.; Reich, C. D.; Swarzenski, P. W.; Langevin, C. D.

    2005-05-01

    Biscayne Bay and Biscayne National Park (BNP) are located next to the Miami-Dade urban complex and are adjacent to the Dade County South Dade Landfill Facility and the Miami-Dade Water and Sewer South District Plant. The base of the landfill is lined to separate it from the underlying Miami Limestone, the host rock for the surficial Biscayne Aquifer. The sewage-treatment facility injects treated sewage into the lower Florida Aquifer (750 m) that is overlain by an aquitard termed the Middle Confining Unit (450 m). The Biscayne Aquifer (up to 50 m thick) borders the western margin of BNP, and the Floridan Aquifer underlies the entire park. There is concern about leakage of contaminated aquifer water into BNP and its potential effects on water quality. Groundwater flux to Biscayne Bay is being studied using pressure measurements and geochemical analyses from submarine wells, electromagnetic seepage meters, streaming resistivity profiling, and local and regional model simulations. Both seepage meters and water analyses provide point information that can be placed into the regional context provided by flow models and geochemical and geophysical profiling, which, in turn, constrain the groundwater contribution. Water samples were collected approximately quarterly from August 2002 until March 2004 from submarine wells along a transect through Biscayne Bay and across the reef to the shelf edge. Samples were analyzed for conductivity (salinity), dissolved oxygen, temperature, redox potential, nutrients, metals, strontium isotopes, radon, sulfate, and wastewater compounds. Low-salinity water was identified from nearshore wells and indicates seepage from the Biscayne Aquifer and/or surface-water intrusion into the rocks along western Biscayne Bay. Analyses of water samples (n = 109) collected from wells across the Florida shelf show no consistent evidence of wastewater contaminants occurring in groundwater beneath BNP. No significant leakage from the Floridan Aquifer

  17. Experimental Evaluation of Installed Cooking Exhaust Fan Performance

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Brett C.; Delp, William W.; Apte, Michael G.

    2010-11-01

    The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners.Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g., single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (from<5percent to roughly 100percent) across devices and across conditions for some devices. As expected, higher capture efficiencies were achieved with higher fan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range

  18. Design of a Low Speed Fan Stage for Noise Suppression

    Science.gov (United States)

    Dalton, W. N.; Elliot, D. B.; Nickols, K. L.

    1999-01-01

    This report describes the design of a low tip speed, moderate pressure rise fan stage for demonstration of noise reduction concepts. The fan rotor is a fixed-pitch configuration delivering a design pressure ratio of 1.378 at a specific flow of 43.1 lbm/sec/sq ft. Four exit stator configurations were provided to demonstrate the effectiveness of circumferential and axial sweep in reducing rotor-stator interaction tone noise. The fan stage design was combined with an axisymmetric inlet, conical convergent nozzle, and nacelle to form a powered fan-nacelle subscale model. This model has a 22-inch cylindrical flow path and employs a rotor with a 0.30 hub-to-tip radius ratio. The design is fully compatible with an existing NASA force balance and rig drive system. The stage aerodynamic and structural design is described in detail. Three-dimensional (3-D) computational fluid dynamics (CFD) tools were used to define optimum airfoil sections for both the rotor and stators. A fan noise predictive system developed by Pratt & Whitney under contract to NASA was used to determine the acoustic characteristics of the various stator configurations. Parameters varied included rotor-to-stator spacing and vane leading edge sweep. The structural analysis of the rotor and stator are described herein. An integral blade and disk configuration was selected for the rotor. Analysis confirmed adequate low cycle fatigue life, vibratory endurance strength, and aeroelastic suitability. A unique load carrying stator arrangement was selected to minimize generation of tonal noise due to sources other than rotor-stator interaction. Analysis of all static structural components demonstrated adequate strength, fatigue life, and vibratory characteristics.

  19. Measuring currents in submarine canyons: technological and scientific progress in the past 30 years

    Science.gov (United States)

    Xu, J. P.

    2011-01-01

    The development and application of acoustic and optical technologies and of accurate positioning systems in the past 30 years have opened new frontiers in the submarine canyon research communities. This paper reviews several key advancements in both technology and science in the field of currents in submarine canyons since the1979 publication of Currents in Submarine Canyons and Other Sea Valleys by Francis Shepard and colleagues. Precise placements of high-resolution, high-frequency instruments have not only allowed researchers to collect new data that are essential for advancing and generalizing theories governing the canyon currents, but have also revealed new natural phenomena that challenge the understandings of the theorists and experimenters in their predictions of submarine canyon flow fields. Baroclinic motions at tidal frequencies, found to be intensified both up canyon and toward the canyon floor, dominate the flow field and control the sediment transport processes in submarine canyons. Turbidity currents are found to frequently occur in active submarine canyons such as Monterey Canyon. These turbidity currents have maximum speeds of nearly 200 cm/s, much smaller than the speeds of turbidity currents in geological time, but still very destructive. In addition to traditional Eulerian measurements, Lagrangian flow data are essential in quantifying water and sediment transport in submarine canyons. A concerted experiment with multiple monitoring stations along the canyon axis and on nearby shelves is required to characterize the storm-trigger mechanism for turbidity currents.

  20. Fans and their applications in General Topology, Functional Analysis and Topological Algebra

    OpenAIRE

    Banakh, Taras

    2016-01-01

    A family of closed subsets of a topological space $X$ is called a (strict) $Cld$-fan in $X$ if this family is (strictly) compact-finite but not locally finite in $X$. Applications of (strict) $Cld$-fans are based on a simple observation that $k$-spaces contain no $Cld$-fan and Ascoli spaces contain no strict $Cld$-fan. In this paper we develop the machinery of (strict) fans and apply it to detecting the $k$-space and Ascoli properties in spaces that naturally appear in General Topology, Funct...

  1. Numerical investigation of geometric parameter effects on the aerodynamic performance of a Bladeless fan

    OpenAIRE

    Mohammad Jafari; Hossein Afshin; Bijan Farhanieh; Atta Sojoudi

    2016-01-01

    Aerodynamic performance of a Bladeless fan is numerically investigated considering the effect of five geometric parameters. Airflow through this fan was analyzed by simulating a Bladeless fan within a 2 m × 2 m × 4 m room. Analysis of the flow field inside the fan and the evaluation of its performance were obtained by solving conservations of mass and momentum equations for the aerodynamic investigations. In order to design the Bladeless fan an Eppler 473 airfoil profile was used as the cross...

  2. Reverse Flow Engine Core Having a Ducted Fan with Integrated Secondary Flow Blades

    Science.gov (United States)

    Kisska, Michael K. (Inventor); Princen, Norman H. (Inventor); Kuehn, Mark S. (Inventor); Cosentino, Gary B. (Inventor)

    2014-01-01

    Secondary air flow is provided for a ducted fan having a reverse flow turbine engine core driving a fan blisk. The fan blisk incorporates a set of thrust fan blades extending from an outer hub and a set of integral secondary flow blades extending intermediate an inner hub and the outer hub. A nacelle provides an outer flow duct for the thrust fan blades and a secondary flow duct carries flow from the integral secondary flow blades as cooling air for components of the reverse flow turbine engine.

  3. On the design and structural analysis of jet engine fan blade structures

    Science.gov (United States)

    Amoo, Leye M.

    2013-07-01

    Progress in the design and structural analysis of commercial jet engine fan blades is reviewed and presented. This article is motivated by the key role fan blades play in the performance of advanced gas turbine jet engines. The fundamentals of the associated physics are emphasized. Recent developments and advancements have led to an increase and improvement in fan blade structural durability, stability and reliability. This article is intended as a high level review of the fan blade environment and current state of structural design to aid further research in developing new and innovative fan blade technologies.

  4. Gas Turbine Engine Having Fan Rotor Driven by Turbine Exhaust and with a Bypass

    Science.gov (United States)

    Suciu, Gabriel L. (Inventor); Chandler, Jesse M. (Inventor)

    2016-01-01

    A gas turbine engine has a core engine incorporating a core engine turbine. A fan rotor is driven by a fan rotor turbine. The fan rotor turbine is in the path of gases downstream from the core engine turbine. A bypass door is moveable from a closed position at which the gases from the core engine turbine pass over the fan rotor turbine, and moveable to a bypass position at which the gases are directed away from the fan rotor turbine. An aircraft is also disclosed.

  5. On-chip grating coupler array on the SOI platform for fan-in/fan-out of MCFs with low insertion loss and crosstalk

    DEFF Research Database (Denmark)

    Ding, Yunhong; Ye, Feihong; Peucheret, Christophe

    2015-01-01

    We report the design and fabrication of a compact multi-core fiber fan-in/fan-out using a grating coupler array on the SOI platform. The grating couplers are fully-etched, enabling the whole circuit to be fabricated in a single lithography and etching step. Thanks to the apodized design for the g......We report the design and fabrication of a compact multi-core fiber fan-in/fan-out using a grating coupler array on the SOI platform. The grating couplers are fully-etched, enabling the whole circuit to be fabricated in a single lithography and etching step. Thanks to the apodized design...

  6. Magnetohydrodynamic (MHD) nuclear weapons effects on submarine cable systems. Volume 1. Experiments and analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    This report presents a study of the nuclear weapons magnetohydrodynamic (MHD) effects on submarine communications cables. The study consisted of the analysis and interpretation of currently available data on submarine cable systems TAT-4, TAT-6, and TAT-7. The primary result of the study is that decrease of the effective resistivity with frequency over the available experimental range, coupled with the model results, leads to quite small effective resistivities at the MHD characteristic frequencies, and hence small earth potential differences. Thus, it appears that submarine cable systems are less susceptible to an MHD threat than their land-based counter-parts.

  7. The Needed Minimum Submergence Depth When a Submarine Runs into Typhoon

    Institute of Scientific and Technical Information of China (English)

    Zhang Deyu

    2003-01-01

    In this paper,the influence depths of all levels of wind power produced waves are reckoned according to the measured swaying degree when a submarine meets with a force 11 strong tropical storm and has to submerge;Then the minimum submergence depth is given when a submarine is faced with weather systems with force ≥6 wind and the swaying degree of less than 12 degree is assured as reference for a submarine working and sailing in big strong winds and waves.

  8. Design specifications of the Human Robotic interface for the biomimetic underwater robot "yellow submarine project"

    CERN Document Server

    Bheemaiah, Anil

    2010-01-01

    This paper describes the design of a web based multi agent design for a collision avoidance auto navigation biomimetic submarine for submarine hydroelectricity. The paper describes the nature of the map - topology interface for river bodies and the design of interactive agents for the control of the robotic submarine. The agents are migratory on the web and are designed in XML/html interface with both interactive capabilities and visibility on a map. The paper describes mathematically the user interface and the map definition languages used for the multi agent description

  9. Prediction of nuclear submariner adaptability from autonomic indices and Rorschach Inkblot responses. Interim report

    Energy Technology Data Exchange (ETDEWEB)

    Weybrew, B.B.; Molish, H.B.

    1986-09-09

    To identify the most valid predictors of submariner adaptability, the authors derived 23 indices from the responses of 170 nuclear submariners to the Rorschach Inkblot Test, 11 measures of Autonomic Nervous System (ANS) reactivity to contrived stress, and five adjustment criteria. Factor analysis of this 39x39 correlation matrix yielded two Rorschach Factors, one of which correlated with three criterion dimensions. Two unique factors were also discovered, one, a structured ANS factor, and the other, a complex criterion scale. Selected Rorschach scores and, to a lesser extent, certain ANS indices emanating from this study, may be usefully-valid predictors of the adaptability of nuclear submariners during long patrols.

  10. Origin and distribution of the organic matter in the distal lobe of the Congo deep-sea fan - A Rock-Eval survey

    Science.gov (United States)

    Baudin, François; Stetten, Elsa; Schnyder, Johann; Charlier, Karine; Martinez, Philippe; Dennielou, Bernard; Droz, Laurence

    2017-08-01

    The Congo River, the second largest river in the world, is a major source of organic matter for the deep Atlantic Ocean because of the connection of its estuary to the deep offshore area by a submarine canyon which feeds a vast deep-sea fan. The lobe zone of this deep-sea fan is the final receptacle of the sedimentary inputs presently channelled by the canyon and covers an area of 2500 km². The quantity and the source of organic matter preserved in recent turbiditic sediments from the distal lobe of the Congo deep-sea fan were assessed using Rock-Eval pyrolysis analyses. Six sites, located at approximately 5000 m water-depth, were investigated. The mud-rich sediments of the distal lobe contain high amounts of organic matter ( 3.5 to 4% Corg), the origin of which is a mixture of terrestrial higher-plant debris, soil organic matter and deeply oxidized phytoplanktonic material. Although the respective contribution of terrestrial and marine sources of organic matter cannot be precisely quantified using Rock-Eval analyses, the terrestrial fraction is dominant according to similar hydrogen and oxygen indices of both suspended and bedload sediments from the Congo River and that deposited in the lobe complex. The Rock-Eval signature supports the 70% to 80% of the terrestrial fraction previously estimated using C/N and δ13Corg data. In the background sediment, the organic matter distribution is homogeneous at different scales, from a single turbiditic event to the entire lobe, and changes in accumulation rates only have a limited effect on the quantity and quality of the preserved organic matter. Peculiar areas with chemosynthetic bivalves and/or bacterial mats, explored using ROV Victor 6000, show a Rock-Eval signature similar to background sediment. This high organic carbon content associated to high sedimentation rates (> 2 to 20 mm.yr-1) in the Congo distal lobe complex implies a high burial rate for organic carbon. Consequently, the Congo deep-sea fan represents an

  11. Aeroelastic Calculations of Quiet High- Speed Fan Performed

    Science.gov (United States)

    Bakhle, Milind A.; Srivastava, Rakesh; Mehmed, Oral; Min, James B.

    2002-01-01

    An advanced high-speed fan was recently designed under a cooperative effort between the NASA Glenn Research Center and Honeywell Engines & Systems. The principal design goals were to improve performance and to reduce fan noise at takeoff. Scale models of the Quiet High-Speed Fan were tested for operability, performance, and acoustics. During testing, the fan showed significantly improved noise characteristics, but a self-excited aeroelastic vibration known as flutter was encountered in the operating range. Flutter calculations were carried out for the Quiet High-Speed Fan using a three-dimensional, unsteady aerodynamic, Reynolds-averaged Navier-Stokes turbomachinery code named "TURBO." The TURBO code can accurately model the viscous flow effects that can play an important role in various aeroelastic problems such as flutter with flow separation, flutter at high loading conditions near the stall line (stall flutter), and flutter in the presence of shock and boundary-layer interaction. Initially, calculations were performed with no blade vibrations. These calculations were at a constant rotational speed and a varying mass flow rate. The mass flow rate was varied by changing the backpressure at the exit boundary of the computational domain. These initial steady calculations were followed by aeroelastic calculations in which the blades were prescribed to vibrate harmonically in a natural mode, at a natural frequency, and with a fixed interblade phase angle between adjacent blades. The AE-prep preprocessor was used to interpolate the in-vacuum mode shapes from the structural dynamics mesh onto the computational fluid dynamics mesh and to smoothly propagate the grid deformations from the blade surface to the interior points of the grid. The aeroelastic calculations provided the unsteady aerodynamic forces on the blade surface due to blade vibrations. These forces were vector multiplied with the structural dynamic mode shape to calculate the work done on the blade during

  12. Human KIAA1018/FAN1 nuclease is a new mitotic substrate of APC/CCdh1

    Institute of Scientific and Technical Information of China (English)

    Fenju Lai; Kaishun Hu; Yuanzhong Wu; Jianjun Tang; Yi Sang; Jingying Cao; Tiebang Kang

    2012-01-01

    A recently identified protein,FAN1 (FANCD2-associated nuclease 1,previously known as KIAA1018),is a novel nuclease associated with monoubiquitinated FANCD2 that is required for cellular resistance against DNA interstrand crosslinking (ICL) agents.The mechanisms of FAN1 regulation have not yet been explored.Here,we provide evidence that FAN1 is degraded during mitotic exit,suggesting that FAN1 may be a mitotic substrate of the anaphase-promoting cyclosome complex (APC/C).Indeed,.Cdh1,but not Cdc20,was capable of regulating the protein level of FAN1 through the KEN box and the D-box.Moreover,the up- and down-regulation of FAN1 affected the progression to mitotic exit.Collectively,these data suggest that FAN1 may be a new mitotic substrate of APC/CCdh1 that plays a key role during mitotic e xit.

  13. The thermal regime around buried submarine high-voltage cables

    Science.gov (United States)

    Emeana, C. J.; Hughes, T. J.; Dix, J. K.; Gernon, T. M.; Henstock, T. J.; Thompson, C. E. L.; Pilgrim, J. A.

    2016-08-01

    The expansion of offshore renewable energy infrastructure and the need for trans-continental shelf power transmission require the use of submarine high-voltage (HV) cables. These cables have maximum operating surface temperatures of up to 70 °C and are typically buried 1-2 m beneath the seabed, within the wide range of substrates found on the continental shelf. However, the heat flow pattern and potential effects on the sedimentary environments around such anomalously high heat sources in the near-surface sediments are poorly understood. We present temperature measurements from a 2-D laboratory experiment representing a buried submarine HV cable, and identify the thermal regimes generated within typical unconsolidated shelf sediments—coarse silt, fine sand and very coarse sand. We used a large (2 × 2.5 m2) tank filled with water-saturated spherical glass beads (ballotini) and instrumented with a buried heat source and 120 thermocouples to measure the time-dependent 2-D temperature distributions. The observed and corresponding Finite Element Method simulations of the steady state heat flow regimes and normalized radial temperature distributions were assessed. Our results show that the heat transfer and thus temperature fields generated from submarine HV cables buried within a range of sediments are highly variable. Coarse silts are shown to be purely conductive, producing temperature increases of >10 °C up to 40 cm from the source of 60 °C above ambient; fine sands demonstrate a transition from conductive to convective heat transfer between cf. 20 and 36 °C above ambient, with >10 °C heat increases occurring over a metre from the source of 55 °C above ambient; and very coarse sands exhibit dominantly convective heat transfer even at very low (cf. 7 °C) operating temperatures and reaching temperatures of up to 18 °C above ambient at a metre from the source at surface temperatures of only 18 °C. These findings are important for the surrounding near

  14. Submarine ground-water discharge: nutrient loading and nitrogen transformations

    Science.gov (United States)

    Kroeger, Kevin D.; Swarzenski, Peter W.; Crusius, John; Bratton, John F.; Charette, Matthew A.

    2006-01-01

    Eutrophication of coastal waters due to nonpoint source land-derived nitrogen (N) loads is a worldwide phenomenon and perhaps the greatest agent of change altering coastal ecology (National Research Council, 2000; Howarth and others, 2000). Within the United States, a majority of estuaries have been determined to be moderately to severely impaired by eutrophication associated with increasing nutrient loads (Bricker and others, 1999).In coastal watersheds with soils of high hydraulic conductivity and permeable coastal sediments, ground water is a major route of transport of freshwater and its solutes from land to sea. Freshwater flowing downgradient from aquifers may either discharge from a seepage face near the intertidal zone, or flow directly into the sea as submarine ground-water discharge (SGD) (fig. 1). In the coastal aquifer, entrainment of saline pore water occurs prior to discharge, producing a gradient in ground-water salinity from land to sea, referred to as a subterranean estuary (Moore, 1999). In addition, processes including density-driven flow and tidal pumping create brackish and saline ground-water circulation. Hence, submarine ground-water discharge often consists of a substantial amount of recirculating seawater. Mixing of fresh and saline ground waters in the context of coastal sediments may alter the chemical composition of the discharging fluid. Depending on the biogeochemical setting, removal of fixed N due to processes leading to N2 (dinitrogen gas) production in the nearshore aquifer and subterranean estuary may significantly attenuate land-derived N loads; or, processes such as ion exchange and tidal pumping in the subterranean estuary may substantially accelerate the transport of both land-derived and sediment re-mineralized N to estuarine water columns.As emphasized by Burnett and others (2001, 2002), a fundamental problem in evaluating the importance of ground-water discharge in marine geochemical budgets is the difficulty of collecting

  15. Hawaiian submarine manganese-iron oxide crusts - A dating tool?

    Science.gov (United States)

    Moore, J.G.; Clague, D.A.

    2004-01-01

    Black manganese-iron oxide crusts form on most exposed rock on the ocean floor. Such crusts are well developed on the steep lava slopes of the Hawaiian Ridge and have been sampled during dredging and submersible dives. The crusts also occur on fragments detached from bedrock by mass wasting, on submerged coral reefs, and on poorly lithified sedimentary rocks. The thickness of the crusts was measured on samples collected since 1965 on the Hawaiian Ridge from 140 dive or dredge localities. Fifty-nine (42%) of the sites were collected in 2001 by remotely operated vehicles (ROVs). The thinner crusts on many samples apparently result from post-depositional breakage, landsliding, and intermittent burial of outcrops by sediment. The maximum crust thickness was selected from each dredge or dive site to best represent crusts on the original rock surface at that site. The measurements show an irregular progressive thickening of the crusts toward the northwest-i.e., progressive thickening toward the older volcanic features with increasing distance from the Hawaiian hotspot. Comparison of the maximum crust thickness with radiometric ages of related subaerial features supports previous studies that indicate a crust-growth rate of about 2.5 mm/m.y. The thickness information not only allows a comparison of the relative exposure ages of two or more features offshore from different volcanoes, but also provides specific age estimates of volcanic and landslide deposits. The data indicate that some of the landslide blocks within the south Kona landslide are the oldest exposed rock on Mauna Loa, Kilauea, or Loihi volcanoes. Crusts on the floors of submarine canyons off Kohala and East Molokai volcanoes indicate that these canyons are no longer serving as channelways for downslope, sediment-laden currents. Mahukona volcano was approximately synchronous with Hilo Ridge, both being younger than Hana Ridge. The Nuuanu landslide is considerably older than the Wailau landslide. The Waianae

  16. Modal analysis of an aircraft engine fan noise

    Science.gov (United States)

    Gorodkova, Natalia; Chursin, Valeriy; Bersenev, Yuliy; Burdakov, Ruslan; Siner, Aleksandr; Viskova, Tatiana

    2016-10-01

    The fan is one of the main noise sources of an aircraft engine. To reduce fan noise and provide liner optimization in the inlet it is necessary to research modal structure of the fan noise. The present paper contains results of acoustic tests on installation for mode generation that consists of 34-channel generator and the inlet updated for mounting of 100 microphones, the experiments were provided in new anechoic chamber of Perm National Research Polytechnic University, the engine with the same inlet was also tested in the open test bench conditions, and results of the fan noise modal structure are presented. For modal structure educting, all 100 channels were synchronously registered in a given frequency range. The measured data were analyzed with PULSE analyzer using fast Fourier transform with a frequency resolution 8..16 Hz. Single modes with numbers from 0 to 35 at frequencies 500; 630; 800; 1000; 1250; 1600 Hz and different combinations of modes at frequencies 1000, 1600, 2000, 2500 Hz were set during tests. Modes with small enough numbers are generated well on the laboratory installation, high-number modes generate additional modes caused by a complicated interference pattern of sound field in the inlet. Open test bench results showed that there are also a lot of harmonic components at frequencies lower than fan BPF. Under 0.65 of cut off there is only one distinct mode, other modes with close and less numbers appear from 0.7 of cut off and above. At power regimes 0.76 and 0.94 of cut off the highest mode also changes from positive to negative mode number area. Numbers of the highest modes change smoothly enough with the growth of power regime. At power regimes with Mach>1 (0.7 of cut off and above) on circumference of blade wheel there is a well-defined noise of shock waves at rotor frequency harmonics that appears at the range between the first rotor frequency and fan blade passing frequency (BPF). It is planned to continue researching of sound field

  17. Analysis of Axial Flow Ventilation Fans by Vortex - Method.

    Science.gov (United States)

    Hardin, Richard Anthony

    A steady vortex-lattice method is used to solve the lifting surface equation for an axial flow fan. The type of fan studied is designed for industrial and ventilation applications and in thermofluid systems such as cooling towers. The fan blades are thin cambered surfaces manufactured from metal sheets. The numerical approach is inviscid and results in a boundary value problem with viscous effects partially accounted for by application of drag coefficient data. A non-linear wake alignment procedure is used to account for the effects of vorticity shedding in the wake and variation in wake geometry with operating conditions. The wake alignment procedure is semi-free with wake input parameters required for accurate use of the technique. A study of the wake parameters was conducted and gave trends in the variation of their values with flow rate. At "free-air" conditions, flow visualization estimates of these parameters were found to agree with those from the computations. Comparisons are made between the measured and predicted fan performance with and without a surrounding duct. The comparison of the results were especially good at the "free-air" condition using wake parameters determined from flow visualization and an inlet velocity profile measured using hot-wire anemometry. To enable better understanding of basic flow phenomena and to provide data for verification of numerical analyses, a method for measuring unsteady surface pressure on a rotating axial-flow fan blade was devised. Unsteadiness of pressure on the blade surfaces is due to the effects of upstream fan motor supports and other installation features. A pressure transducer and signal amplification circuit were mounted on a circuit board at the rotating hub with signals taken off the rotating shaft through copper disk-mercury slip rings. The pressure difference across the blade was determined and the data were corrected for time lag and distortion caused by the length of tubing. The pressure difference

  18. Aliphatic hydrocarbons and triterpenes of the Congo deep-sea fan

    Science.gov (United States)

    Méjanelle, Laurence; Rivière, Béatrice; Pinturier, Laurence; Khripounoff, Alexis; Baudin, François; Dachs, Jordi

    2017-08-01

    Hydrocarbons were analyzed in sediments from the Congo River deep-sea fan, from the Congo River, and in sinking particles collected by sediment traps 40 m above the sediment. Studied sites encompassed three lobes of decreasing age of formation along the canyon: sites A, F and C and a another lobe system, disconnected from the active channel since 4 ka, Site E. Terrestrial long-chain odd n-alkanes were dominant in all sediments of the lobe system. Unsaturated terpenoids sourced by higher plants, such as gammacerene, lupene, ursene and oleanene, were also detected. At site C, characterized by high accumulation rates (10-20 cm yr-1), the organic matter spends less time in the oxic layer than at other sites and high phytadiene concentrations 10-17 μg gOC-1) evidenced recent terrestrial and phytoplanktonic remains reworked in anaerobic conditions. In these sediments, organic carbon-normalized concentrations of terrestrial alkanes and terpenoids were several fold higher than in the lobe sediments with lower accumulation rates (sites A and F), arguing for a more rapid degradation of terrestrial hydrocarbons than bulk organic carbon in the first steps of pre-diagenesis. Ample variations in the contributions of biomarkers from higher plants, ferns, bacteria and angiosperms, indicate an heterogeneous contribution of the soil and vegetation detritus delivered to the Congo lobe sediments. Lower concentrations in terrestrial hydrocarbons at site E, 45 km away from the active canyon, indicated that river particles are still admixed to the dominant marine organic matter. Diploptene and hop-7(21)-ene have a dual origin, from terrestrial and marine microorganisms. Scatter in their relationship to gammacerene argues for a contribution of marine microorganisms, in addition to soils-sourced microorganisms. The close distribution patterns of diploptene, hop-21-ene, hop-7(21)ene and neohop-13(18)-ene is in line with the hypothesis of sequential clay-catalyzed isomerisation of bacterial

  19. Naval submarine base Kings Bay and Bangor soil evaluations.

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Joseph; Patteson, Raymond; Wesenberg, Donald L.; Attaway, Stephen W.

    2004-08-01

    This report provides soil evaluation and characterization testing for the submarine bases at Kings Bay, Georgia, and Bangor, Washington, using triaxial testing at high confining pressures with different moisture contents. In general, the samples from the Bangor and Kings Bay sites appeared to be stronger than a previously used reference soil. Assuming the samples of the material were representative of the material found at the sites, they should be adequate for use in the planned construction. Since soils can vary greatly over even a small site, a soil specification for the construction contractor would be needed to insure that soil variations found at the site would meet or exceed the requirements. A suggested specification for the Bangor and Kings Bay soils was presented based on information gathered from references plus data obtained from this study, which could be used as a basis for design by the construction contractor.

  20. Continental patterns of submarine groundwater discharge reveal coastal vulnerabilities

    Science.gov (United States)

    Sawyer, Audrey H.; David, Cédric H.; Famiglietti, James S.

    2016-08-01

    Submarine groundwater discharge (SGD) delivers water and dissolved chemicals from continents to oceans, and its spatial distribution affects coastal water quality. Unlike rivers, SGD is broadly distributed and relatively difficult to measure, especially at continental scales. We present spatially resolved estimates of fresh (land-derived) SGD for the contiguous United States based on historical climate records and high-resolution hydrographic data. Climate controls regional patterns in fresh SGD, while coastal drainage geometry imparts strong local variability. Because the recharge zones that contribute fresh SGD are densely populated, the quality and quantity of fresh SGD are both vulnerable to anthropogenic disturbance. Our analysis unveils hot spots for contaminant discharge to marine waters and saltwater intrusion into coastal aquifers.

  1. Submarine hydrothermal metamorphism of the Del Puerto ophiolite, California.

    Science.gov (United States)

    Evarts, R.C.; Schiffman, P.

    1983-01-01

    Metamorphic zonation overprinted on the volcanic member and overlying volcanogenic sediments of the ophiolite complex increases downward in grade and is characterized by the sequential appearance with depth of zeolites, ferric pumpellyite and pistacitic epidote. Metamorphic assemblages of the plutonic member of the complex are characterized by the presence of calcic amphibole. The overprinting represents the effects of hydrothermal metamorphism resulting from the massive interaction between hot igneous rocks and convecting sea-water in a submarine environment. A thermal gradient of 100oC/km is postulated to account for the zonal recrystallization effects in the volcanic member. The diversity and sporadic distribution of mineral assemblages in the amphibole zone are considered due to the limited availability of H2O in the deeper part of the complex. Details of the zonation and representative microprobe analyses are tabulated.-M.S.

  2. Probabilistic ultimate strength analysis of submarine pressure hulls

    Science.gov (United States)

    Cerik, Burak Can; Shin, Hyun-Kyoung; Cho, Sang-Rai

    2013-03-01

    This paper examines the application of structural reliability analysis to submarine pressure hulls to clarify the merits of probabilistic approach in respect thereof. Ultimate strength prediction methods which take the inelastic behavior of ring-stiffened cylindrical shells and hemi-spherical shells into account are reviewed. The modeling uncertainties in terms of bias and coefficient of variation for failure prediction methods in current design guidelines are defined by evaluating the compiled experimental data. A simple ultimate strength formulation for ring-stiffened cylinders taking into account the interaction between local and global failure modes and an ultimate strength formula for hemispherical shells which have better accuracy and reliability than current design codes are taken as basis for reliability analysis. The effects of randomness of geometrical and material properties on failure are assessed by a prelimnary study on reference models. By evaluation of sensitivity factors important variables are determined and comparesons are made with conclusions of previous reliability studies.

  3. Active Control of Fan Noise: Feasibility Study. Volume 3; Active Fan Noise Cancellation in the NASA Lewis Active Noise Control Fan Facility

    Science.gov (United States)

    Pla, Frederic G.; Hu, Ziqiang; Sutliff, Daniel L.

    1996-01-01

    This report describes the Active Noise Cancellation (ANC) System designed by General Electric and tested in the NASA Lewis Research Center's (LERC) 48 inch Active Noise Control Fan (ANCF). The goal of this study is to assess the feasibility of using wall mounted secondary acoustic sources and sensors within the duct of a high bypass turbofan aircraft engine for global active noise cancellation of fan tones. The GE ANC system is based on a modal control approach. A known acoustic mode propagating in the fan duct is canceled using an array of flush-mounted compact sound sources. The canceling modal signal is generated by a modal controller. Inputs to the controller are signals from a shaft encoder and from a microphone array which senses the residual acoustic mode in the duct. The key results are that the (6,0) was completely eliminated at the 920 Hz design frequency and substantially reduced elsewhere. The total tone power was reduced 6.8 dB (out of a possible 9.8 dB). Farfield reductions of 15 dB (SPL) were obtained. The (4,0) and (4,1) modes were reduced simultaneously yielding a 15 dB PWL decrease. The results indicate that global attenuation of PWL at the target frequency was obtained in the aft quadrant using an ANC actuator and sensor system totally contained within the duct. The quality of the results depended on precise mode generation. High spillover into spurious modes generated by the ANC actuator array caused less than optimum levels of PWL reduction. The variation in spillover is believed to be due to calibration procedure, but must be confirmed in subsequent tests.

  4. Statistical Tests of the PTHA Poisson Assumption for Submarine Landslides

    Science.gov (United States)

    Geist, E. L.; Chaytor, J. D.; Parsons, T.; Ten Brink, U. S.

    2012-12-01

    We demonstrate that a sequence of dated mass transport deposits (MTDs) can provide information to statistically test whether or not submarine landslides associated with these deposits conform to a Poisson model of occurrence. Probabilistic tsunami hazard analysis (PTHA) most often assumes Poissonian occurrence for all sources, with an exponential distribution of return times. Using dates that define the bounds of individual MTDs, we first describe likelihood and Monte Carlo methods of parameter estimation for a suite of candidate occurrence models (Poisson, lognormal, gamma, Brownian Passage Time). In addition to age-dating uncertainty, both methods incorporate uncertainty caused by the open time intervals: i.e., before the first and after the last event to the present. Accounting for these open intervals is critical when there are a small number of observed events. The optimal occurrence model is selected according to both the Akaike Information Criteria (AIC) and Akaike's Bayesian Information Criterion (ABIC). In addition, the likelihood ratio test can be performed on occurrence models from the same family: e.g., the gamma model relative to the exponential model of return time distribution. Parameter estimation, model selection, and hypothesis testing are performed on data from two IODP holes in the northern Gulf of Mexico that penetrated a total of 14 MTDs, some of which are correlated between the two holes. Each of these events has been assigned an age based on microfossil zonations and magnetostratigraphic datums. Results from these sites indicate that the Poisson assumption is likely valid. However, parameter estimation results using the likelihood method for one of the sites suggest that the events may have occurred quasi-periodically. Methods developed in this study provide tools with which one can determine both the rate of occurrence and the statistical validity of the Poisson assumption when submarine landslides are included in PTHA.

  5. An Atlas of Submarine Glacial Landforms: Modern, Quaternary and Ancient

    Science.gov (United States)

    Jakobsson, M.; Dowdeswell, J. A.; Canals, M.; Todd, B. J.; Dowdeswell, E. K.; Hogan, K. A.

    2014-12-01

    In the past two decades there have been several advances that make the production of an atlas of submarine glacial landforms timely. First is the development of high-resolution imaging technologies; multi-beam echo-sounding or swath bathymetry that allows the detailed mapping of the sea floor at water depths of tens to thousands of metres across continental margins, and 3-D seismic methods that enable the visualisation of palaeo-continental shelves in Quaternary sediments and ancient palaeo-glacial rocks (e.g. Late Ordovician of Northern Africa). A second technological development is that of ice-breaking or ice-strengthened ships that can penetrate deep into the ice-infested waters of the Arctic and Antarctic, to deploy the multibeam systems. A third component is that of relevance - through both the recognition that the polar regions, and especially the Arctic, are particularly sensitive parts of the global environmental system and that these high-latitude margins (both modern and ancient) are likely to contain significant hydrocarbon resources. An enhanced understanding of the sediments and landforms of these fjord-shelf-slope systems is, therefore, of increasing importance to both academics and industry. We are editing an Atlas of Submarine Glacial Landforms that presents a series of individual contributions that describe, discuss and illustrate features on the high-latitude, glacier-influenced sea floor. Contributions are organised in two ways: first, by position on a continental margin - from fjords, through continental shelves to the continental slope and rise; secondly, by scale - as individual landforms and assemblages of landforms. A final section provides discussion of integrated fjord-shelf-slope systems. Over 100 contributions by scientists from many countries contain descriptions and interpretation of swath-bathymetric data from both Arctic and Antarctic margins and use 3D seismic data to investigate ancient glacial landforms. The Atlas will be

  6. Total Magnetic Field Signatures over Submarine HVDC Power Cables

    Science.gov (United States)

    Johnson, R. M.; Tchernychev, M.; Johnston, J. M.; Tryggestad, J.

    2013-12-01

    Mikhail Tchernychev, Geometrics, Inc. Ross Johnson, Geometrics, Inc. Jeff Johnston, Geometrics, Inc. High Voltage Direct Current (HVDC) technology is widely used to transmit electrical power over considerable distances using submarine cables. The most commonly known examples are the HVDC cable between Italy and Greece (160 km), Victoria-Tasmania (300 km), New Jersey - Long Island (82 km) and the Transbay cable (Pittsburg, California - San-Francisco). These cables are inspected periodically and their location and burial depth verified. This inspection applies to live and idle cables; in particular a survey company could be required to locate pieces of a dead cable for subsequent removal from the sea floor. Most HVDC cables produce a constant magnetic field; therefore one of the possible survey tools would be Marine Total Field Magnetometer. We present mathematical expressions of the expected magnetic fields and compare them with fields observed during actual surveys. We also compare these anomalies fields with magnetic fields produced by other long objects, such as submarine pipelines The data processing techniques are discussed. There include the use of Analytic Signal and direct modeling of Total Magnetic Field. The Analytic Signal analysis can be adapted using ground truth where available, but the total field allows better discrimination of the cable parameters, in particular to distinguish between live and idle cable. Use of a Transverse Gradiometer (TVG) allows for easy discrimination between cable and pipe line objects. Considerable magnetic gradient is present in the case of a pipeline whereas there is less gradient for the DC power cable. Thus the TVG is used to validate assumptions made during the data interpretation process. Data obtained during the TVG surveys suggest that the magnetic field of a live HVDC cable is described by an expression for two infinite long wires carrying current in opposite directions.

  7. Geo-hazard by sediment mass movements in submarine canyons

    Science.gov (United States)

    Ghaith, Afif; Fakhri, Milad; Ivaldi, Roberta; Ciavola, Paolo

    2017-04-01

    Submarine mass movements and their consequences are of major concern for coastal communities and infrastructures but also for the exploitation and the development of seafloor resources. Elevated awareness of the need for better understanding of the underwater mass movement is coupled with great advances in underwater mapping technologies over the past two decades. The seafloor in the Nahr Ibrahim and Saida regions (Lebanon) is characterized by deep canyons, reaching one thousand meters depths in proximity of the coast. Signs of submarine mass movement instability related to these canyons create a connection between shallow and deep water. The presence of these canyons in a tectonically active area generates a particular drained mechanism to the sediment in form of mass movement and slumping. Identification of potential areas where slope movements could be triggered requires data with high spatial resolution. Since this area is poorly explored, in the framework of an international project between Lebanese Navy, Lebanese National Center for Marine Sciences, University of Ferrara and Italian Hydrographic Institute, we analyse the morpho-bathymetric and sedimentological characters of the coastal and shelf sectors. Multibeam echosounder and sub-bottom profiler acoustic systems calibrated with ground truths (sediment grab and core samples) allow us to characterize the nature of seafloor and sub-seafloor with particular detail to the geotechnical properties of sediments and high resolution seismic stratigraphy of the shallow layers. The detection of particular undersea features provides detail maps which are in support to littoral morpho-dynamics, coastal transport and sediment budget. Multilayer hydro-oceanographic map, referring to the seafloor dynamics in connection with deep water environment and drainage system, in accordance to the International Hydrographic Standards and nautical supports, are produced. This high resolution multibeam bathymetry dataset, integrated

  8. Submarine lithification of Holocene reef hardground: north Jamaica

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, J.T.

    1987-05-01

    Submarine cementation and organic binding of skeletal reef debris have brought about the formation of an extensive carbonate hardground, which is exposed on the submerged seaward slope of the reefcrest at Discovery Bay, Jamaica. The hardground, dated as Holocene by carbon-14, is comprised of the fragmented and bioeroded remnants of a diverse coral-algal community. Mg-calcite and aragonite, the dominant cements, are common in a variety of growth forms and occupy intraskeletal and interparticle voids. In order of decreasing abundance, Mg-calcite cements exhibit the following growth forms: (1) cryptocrystalline (micritic); (2) submicrocrystalline rhombic; (3) microcrystalline, stubby-to-acicular isopachous; and (4) microcrystalline blocky mosaic. Mg-calcite peloids, spherical bodies 20-60 ..mu..m in diameter, are ubiquitous as geopedal pore-fill. Aragonite cement is most common as acicular needles 50-100 ..mu..m long which grow as syntaxial fringes on skeletal substrates. Less common aragonite cement forms are microcrystalline blocky mosaic cements and radial fibrous aggregates. Adjacent pore spaces generally exhibit different cement fabrics, indicating that pores have unique microenvironments. Electron microprobe analysis revealed dolomite dispersed in the peloidal pore-fill of a coral fragment sampled from 5 cm beneath the hardground surface. /sup 14/C dating, field relationships, isotopic and trace element analysis suggest that trace quantities of Holocene dolomite are forming in the shallow, subtidal reef environment. The formation of the extensive coral pavement is a consequence of the interplay between the destructive forces of catastrophic storm events and bioerosion on one hand and the constructive effects of submarine cementation and organic binding on the other hand.

  9. Submarine canyons along the upper Sardinian slope (Central Western Mediterranean) as repositories for derelict fishing gears.

    Science.gov (United States)

    Cau, Alessandro; Alvito, Andrea; Moccia, Davide; Canese, Simonepietro; Pusceddu, Antonio; Rita, Cannas; Angiolillo, Michela; Follesa, Maria C

    2017-09-11

    By means of ROV surveys, we assessed the quantity, composition and bathymetric distribution of marine litter in 17 sites along the Sardinian continental margin (Central Western Mediterranean) at depths ranging from 100 to 480m. None of the investigated sites was litter free, but the mean density of litter (0.0175±0.0022itemsm(-2)) was lower than that reported from other Tyrrhenian regions. The difference in the total litter density among sites was negligible, but the density of derelict fishing gear (DFG) items (most of which ascribable to small scale fishery) in submarine canyons was higher in submarine canyons than in other habitats. Our result suggest that submarine canyons (known to be highly vulnerable ecosystems) act as major repositories of DFGs, and, therefore, we anticipate the need of specific measures aimed at minimizing the loss and abandonment of DFGs in submarine canyons. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. [Radionuclides 90Sr and 137Cs in the benthos near the nuclear submarine "Komsomolets"].

    Science.gov (United States)

    Kuznetsov, A P; Shmelev, I P; Demidov, A M; Efimov, B V; Shubko, V M

    1999-01-01

    We have analyzed the content of radionuclides 90Sr and 137Cs in the benthofauna and deposits near the nuclear submarine "Komsomolets." Analysis was performed on the basis of the materials of the 31st (1993) and 36th (1995) voyages of R/V "Akademik Mstislav Keldysh" in correspondence with the system of monitoring the state of the abiotic and biotic situation near the nuclear submarine "Komsomolets" (Norwegian Sea). Whereas during the 33rd voyage of this vessel (1994) the content of these elements in the benthic animals at stations located close to the submarine somewhat exceeded the background level of radioactivity (Kuznetsov et al., 1996), no such excess was found during the 31st and 36th voyages. Meanwhile, radioactive cobalt (60Co) was found in representatives of three groups of animals during the 31st voyage at two stations located near the submarine.

  11. Isotopic Analysis of Source Waters Contributing to a Submarine Spring in San Salvador, Bahamas

    Science.gov (United States)

    DeVivero, A. E.; Stalker, J. C.; Swart, P. K.

    2015-12-01

    Submarine groundwater discharge supplies coastlines with a source of fresh, nutrient-rich water. The connection between inland fresh/brackish waters and submarine springs is unknown on San Salvador, Bahamas. A submarine spring within the Cockburntown formation outcrop at Grotto Beach has been identified. In May 2014, a Hobo sonde was placed within the vent for 24 hours collecting conductivity and temperature data. Analysis concluded the springs salinity was at its lowest of 23.9 psu (practical salinity units) at low tide and highest of 29.4 psu at high tide. During May 2015, multiple water samples were collected from the spring vent and 9 surrounding inland water sources. These water sources include fresh and brackish blue holes, and preexisting man-made wells. Analysis of hydrogen and oxygen isotopes gives insight to the conduit connections and source waters of the submarine spring.

  12. Submarine groundwater discharge and nutrient addition to the coastal zone of the Godavari estuary

    Digital Repository Service at National Institute of Oceanography (India)

    Rengarajan, R.; Sarma, V.V.S.S.

    Submarine groundwater discharge (SGD) represents a significant pathway of materials between land and sea, especially as it supplies nutrients, carbon and trace metals to coastal waters. To estimate SGD fluxes to the Godavari estuary, India, we used...

  13. Evaluation of Littoral Combat Ships for Open-Ocean Anti-Submarine Warfare

    Science.gov (United States)

    2016-03-01

    7 Figure 6. China’s Kilo Class Submarine...35 Figure 17. MFTA Probability of Detection vs. Range against LCS Threats .............. 36 Figure 18. MFTA... 36 Table 7. Counter-Detection Parameters ...................................................................47 Table

  14. Volume transport data from a submarine cable in the Florida Strait in 2014 (NODC Accession 0125429)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Daily mean and raw voltage volume transport data of the Florida Current collected with a submarine cable spanning from South Florida to the Grand Bahama Island in...

  15. Volume transport data from a submarine cable in the Florida Strait in 2013 (NODC Accession 0115895)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Daily mean and raw voltage volume transport data of the Florida Current collected with a submarine cable spanning from South Florida to the Grand Bahama Island in...

  16. Experimental Study on the Distribution of Velocity and Pressure near a Submarine Pipeline

    Institute of Scientific and Technical Information of China (English)

    HAN Yan; SHI Bing; REN Xingyue; JING Xiaodong

    2009-01-01

    As a transport means of oil and gas the submarine pipeline has many merits, such as continuous delivery, large conveying capacity, convenient management, etc. A tube was chosen in our study to simulate the submarine pipeline in the experiments. A high accuracy instrument ADV and high precision point-type pressure sensors were used to measure the parameters of the flow field, including the pressure distribution, velocities at seven cross sections near the submarine pipeline with five different clearance ratios, and twelve dynamic pressure values around the pipeline. The pressure distributions and velocity changes around the pipe under different flow velocities and clearance ratios were analyzed. These results might be useful for further study of submarine pipeline erosion and protection.

  17. Volume transport data from a submarine cable in the Florida Strait from 2015 (NCEI Accession 0140278)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Daily mean and raw voltage volume transport data of the Florida Current collected with a submarine cable spanning from South Florida to the Grand Bahama Island in...

  18. Common Submarine Radio Room: A Case Study of a System of Systems Approach

    Science.gov (United States)

    2014-09-01

    International Standards Organization ( ISO ) 9000/ 9001 standards. Since 2008 the CSRR program completed six projects and SSC LANT another 15 related to...104 F. COMMON SUBMARINE RADIO ROOM SYSTEM OF SYSTEMS TRAINING APPROACH...111 3. Training ............................................................................................113 4. Production

  19. The impact of glacier geometry on meltwater plume structure and submarine melt in Greenland fjords

    NARCIS (Netherlands)

    Carroll, D.; Sutherland, D. A.; Hudson, B.; Moon, T.; Catania, G. A.; Shroyer, E. L.; Nash, J. D.; Bartholomaus, T. C.; Felikson, D.; Stearns, L. A.; Noël, B. P Y|info:eu-repo/dai/nl/370612345; van den Broeke, M. R.|info:eu-repo/dai/nl/073765643

    2016-01-01

    Meltwater from the Greenland Ice Sheet often drains subglacially into fjords, driving upwelling plumes at glacier termini. Ocean models and observations of submarine termini suggest that plumes enhance melt and undercutting, leading to calving and potential glacier destabilization. Here we

  20. Unsteady flowfield simulation of ducted prop-fan configurations

    Science.gov (United States)

    Janus, J. M.; Horstman, Howard Z.; Whitfield, David L.

    1992-01-01

    A technique for the simulation of unsteady flows in and around complex rotating machinery is presented. Additional domain decomposition mechanisms are introduced which extend the range of applicability of software developed for the time-accurate simulation of rotating machinery flowfields. The flow models uses the unsteady 3D Euler equations, discretized as a finite-volume method, utilizing a high-resolution approximate Riemann solver for cell interface flux definitions. Multiblock domain decomposition is used to partition the field radially, axially, as well as circumferentially into an ordered arrangement of blocks which exhibit varying degrees of similarity. A general high-order numerical scheme is applied to satisfy the geometric conservation law. Two configurations are presented - ducted single rotation prop-fan and a rotor-deswirl vane combination which form a single stage fan. Comparisons are made to other numerical solutions for these geometries and to available experimental data.